1485 lines
47 KiB
Plaintext
1485 lines
47 KiB
Plaintext
MPLS-LPS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE,
|
|
Counter32, Unsigned32
|
|
FROM SNMPv2-SMI -- RFC 2578
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC 2580
|
|
|
|
TEXTUAL-CONVENTION, RowStatus, TimeStamp, StorageType, TruthValue
|
|
FROM SNMPv2-TC -- RFC 2579
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC 3411
|
|
|
|
IndexIntegerNextFree
|
|
FROM DIFFSERV-MIB -- RFC 3289
|
|
|
|
mplsStdMIB
|
|
FROM MPLS-TC-STD-MIB -- RFC 3811
|
|
|
|
mplsOamIdMegIndex, mplsOamIdMeIndex, mplsOamIdMeMpIndex
|
|
FROM MPLS-OAM-ID-STD-MIB; -- RFC 7697
|
|
|
|
mplsLpsMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201704040000Z" -- April 4, 2017
|
|
ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
|
|
CONTACT-INFO
|
|
"
|
|
Kingston Smiler Selvaraj
|
|
IP Infusion
|
|
RMZ Centennial
|
|
Mahadevapura Post
|
|
Bangalore 560048
|
|
India
|
|
Email: kingstonsmiler@gmail.com
|
|
|
|
Venkatesan Mahalingam
|
|
Dell Technologies
|
|
5450 Great America Parkway
|
|
Santa Clara, CA 95054
|
|
United States of America
|
|
Email: venkat.mahalingams@gmail.com
|
|
|
|
Daniel King
|
|
Old Dog Consulting
|
|
United Kingdom
|
|
Email: daniel@olddog.co.uk
|
|
|
|
Sam Aldrin
|
|
Google, Inc.
|
|
1600 Amphitheatre Parkway
|
|
Mountain View, CA 94043
|
|
United States of America
|
|
Email: aldrin.ietf@gmail.com
|
|
|
|
Jeong-dong Ryoo
|
|
ETRI
|
|
218 Gajeong-ro
|
|
Yuseong-gu, Daejeon 34129
|
|
South Korea
|
|
Email: ryoo@etri.re.kr
|
|
"
|
|
DESCRIPTION
|
|
"This MIB module supports the configuration and management of
|
|
MPLS-TP linear protection domains.
|
|
|
|
Copyright (c) 2017 IETF Trust and the persons identified as
|
|
authors of the code. All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or
|
|
without modification, is permitted pursuant to, and subject to
|
|
the license terms contained in, the Simplified BSD License
|
|
set forth in Section 4.c of the IETF Trust's Legal Provisions
|
|
Relating to IETF Documents
|
|
(http://trustee.ietf.org/license-info)."
|
|
|
|
REVISION
|
|
"201704040000Z" -- April 4, 2017
|
|
DESCRIPTION
|
|
"MPLS-TP protection domain objects for
|
|
LSP MEG End Points (MEPs)."
|
|
::= { mplsStdMIB 22 }
|
|
|
|
-- Top-level components of this MIB module.
|
|
-- Notifications
|
|
mplsLpsNotifications
|
|
OBJECT IDENTIFIER ::= { mplsLpsMIB 0 }
|
|
|
|
-- Tables, scalars
|
|
mplsLpsObjects
|
|
OBJECT IDENTIFIER ::= { mplsLpsMIB 1 }
|
|
|
|
-- Conformance
|
|
mplsLpsConformance
|
|
OBJECT IDENTIFIER ::= { mplsLpsMIB 2 }
|
|
|
|
MplsLpsReq ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention describes an object that stores
|
|
the PSC Request field of the PSC control packet. The values
|
|
are as follows:
|
|
|
|
noRequest
|
|
No Request
|
|
|
|
doNotRevert
|
|
Do-not-Revert
|
|
|
|
reverseRequest
|
|
Reverse Request
|
|
|
|
exercise
|
|
Exercise
|
|
|
|
waitToRestore
|
|
Wait-to-Restore
|
|
|
|
manualSwitch
|
|
Manual Switch
|
|
|
|
signalDegrade
|
|
Signal Degrade (SD)
|
|
|
|
signalFail
|
|
Signal Fail (SF)
|
|
|
|
forcedSwitch
|
|
Forced Switch
|
|
|
|
lockoutOfProtection
|
|
Lockout of Protection."
|
|
REFERENCE
|
|
"Section 4.2.2 of RFC 6378 and Section 8 of RFC 7271"
|
|
SYNTAX INTEGER {
|
|
noRequest(0),
|
|
doNotRevert(1),
|
|
reverseRequest(2),
|
|
exercise(3),
|
|
waitToRestore(4),
|
|
manualSwitch(5),
|
|
signalDegrade(7),
|
|
signalFail(10),
|
|
forcedSwitch(12),
|
|
lockoutOfProtection(14)
|
|
}
|
|
|
|
MplsLpsFpathPath ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1x:"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention describes an object that stores
|
|
the Fault Path (FPath) field and Data Path (Path) field of
|
|
the PSC control packet.
|
|
|
|
FPath is located in the first octet, and Path is
|
|
located in the second octet.
|
|
|
|
The value and the interpretation of the FPath field are
|
|
as follows:
|
|
|
|
2-255
|
|
for future extensions
|
|
|
|
1
|
|
the anomaly condition is on the working path
|
|
|
|
0
|
|
the anomaly condition is on the protection path
|
|
|
|
The value and the interpretation of the Path field are
|
|
as follows:
|
|
|
|
2-255
|
|
for future extensions
|
|
|
|
1
|
|
protection path is transporting user data traffic
|
|
|
|
0
|
|
protection path is not transporting user data traffic."
|
|
REFERENCE
|
|
"Sections 4.2.5 and 4.2.6 of RFC 6378"
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
|
|
MplsLpsCommand ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This command allows a user to perform any action over a
|
|
protection domain. If the protection command cannot be
|
|
executed because a request of equal or higher priority is
|
|
in effect, an inconsistentValue error is returned.
|
|
|
|
The command values are as follows:
|
|
|
|
noCmd
|
|
This value should be returned by a read request when no
|
|
command has been written to the object in question since
|
|
initialization. This value may not be used in a write
|
|
operation. If noCmd is used in a write operation, a
|
|
wrongValue error is returned.
|
|
|
|
clear
|
|
Clears all of the commands listed below for the protection
|
|
domain.
|
|
|
|
lockoutOfProtection
|
|
Prevents switching traffic to the protection path.
|
|
|
|
forcedSwitch
|
|
Switches traffic from the working path to the protection path.
|
|
|
|
manualSwitchToWork
|
|
Switches traffic from the protection path to the working path.
|
|
|
|
manualSwitchToProtect
|
|
Switches traffic from the working path to the protection path.
|
|
|
|
exercise
|
|
Used to verify the correct operation of the PSC communication
|
|
and the integrity of the protection path. This command is not
|
|
applicable to the PSC mode.
|
|
|
|
freeze
|
|
This command freezes the protection state and is a local
|
|
command that is not signaled to the remote node.
|
|
This command is not applicable to the PSC mode.
|
|
|
|
clearfreeze
|
|
Clears the local freeze. This command is not applicable to
|
|
the PSC mode."
|
|
REFERENCE
|
|
"Sections 3.1 and 3.2 of RFC 6378 and Sections 4.3 and 6 of
|
|
RFC 7271"
|
|
SYNTAX INTEGER {
|
|
noCmd(1),
|
|
clear(2),
|
|
lockoutOfProtection(3),
|
|
forcedSwitch(4),
|
|
manualSwitchToWork(5),
|
|
manualSwitchToProtect(6),
|
|
exercise(7),
|
|
freeze(8),
|
|
clearfreeze(9)
|
|
}
|
|
|
|
MplsLpsState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention describes an object that stores
|
|
the current state of the PSC state machine. The values
|
|
are as follows:
|
|
|
|
normal
|
|
Normal state.
|
|
|
|
unavLOlocal
|
|
Unavailable state due to local LO command.
|
|
|
|
unavSFPlocal
|
|
Unavailable state due to local SF-P.
|
|
|
|
unavSDPlocal
|
|
Unavailable state due to local SD-P.
|
|
|
|
unavLOremote
|
|
Unavailable state due to remote LO message.
|
|
|
|
unavSFPremote
|
|
Unavailable state due to remote SF-P message.
|
|
|
|
unavSDPremote
|
|
Unavailable state due to remote SD-P message.
|
|
|
|
protfailSFWlocal
|
|
Protecting Failure state due to local SF-W.
|
|
|
|
protfailSDWlocal
|
|
Protecting Failure state due to local SD-W.
|
|
|
|
protfailSFWremote
|
|
Protecting Failure state due to remote SF-W message.
|
|
|
|
protfailSDWremote
|
|
Protecting Failure state due to remote SD-W message.
|
|
|
|
switadmFSlocal
|
|
Switching Administrative state due to local FS command.
|
|
Same as Protecting Administrative state due to local FS
|
|
command in the PSC mode.
|
|
|
|
switadmMSWlocal
|
|
Switching Administrative state due to local MS-W command.
|
|
|
|
switadmMSPlocal
|
|
Switching Administrative state due to local MS-P command.
|
|
Same as Protecting Administrative state due to local MS
|
|
command in the PSC mode.
|
|
|
|
switadmFSremote
|
|
Switching Administrative state due to remote FS message.
|
|
Same as Protecting Administrative state due to remote FS
|
|
message in the PSC mode.
|
|
|
|
switadmMSWremote
|
|
Switching Administrative state due to remote MS-W message.
|
|
|
|
switadmMSPremote
|
|
Switching Administrative state due to remote MS-P message.
|
|
Same as Protecting Administrative state due to remote MS
|
|
message in the PSC mode.
|
|
|
|
wtr
|
|
Wait-to-Restore state.
|
|
|
|
dnr
|
|
Do-not-Revert state.
|
|
|
|
exerLocal
|
|
Exercise state due to local EXER command.
|
|
|
|
exerRemote
|
|
Exercise state due to remote EXER message."
|
|
REFERENCE
|
|
"Sections 3 and 11 of RFC 7271"
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
unavLOlocal(2),
|
|
unavSFPlocal(3),
|
|
unavSDPlocal(4),
|
|
unavLOremote(5),
|
|
unavSFPremote(6),
|
|
unavSDPremote(7),
|
|
protfailSFWlocal(8),
|
|
protfailSDWlocal(9),
|
|
protfailSFWremote(10),
|
|
protfailSDWremote(11),
|
|
switadmFSlocal(12),
|
|
switadmMSWlocal(13),
|
|
switadmMSPlocal(14),
|
|
switadmFSremote(15),
|
|
switadmMSWremote(16),
|
|
switadmMSPremote(17),
|
|
wtr(18),
|
|
dnr(19),
|
|
exerLocal(20),
|
|
exerRemote(21)
|
|
}
|
|
|
|
-- Start of
|
|
-- MPLS-TP Linear Protection Switching Configuration Table.
|
|
-- This table supports the addition, configuration, and deletion
|
|
-- of MPLS-TP linear protection domains.
|
|
|
|
mplsLpsConfigDomainIndexNext OBJECT-TYPE
|
|
SYNTAX IndexIntegerNextFree (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an unused value for
|
|
mplsLpsConfigDomainIndex, or a zero to indicate that
|
|
the number of unassigned entries has been exhausted.
|
|
Negative values are not allowed, as they do not correspond
|
|
to valid values of mplsLpsConfigDomainIndex."
|
|
::= { mplsLpsObjects 1 }
|
|
|
|
mplsLpsConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsLpsConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the MPLS-TP linear protection domains that
|
|
have been configured on the system.
|
|
An entry is created by a network operator who wants to run
|
|
the MPLS-TP linear protection protocol for the protection
|
|
domain."
|
|
::= { mplsLpsObjects 2 }
|
|
|
|
mplsLpsConfigEntry OBJECT-TYPE
|
|
SYNTAX MplsLpsConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the mplsLpsConfigTable."
|
|
INDEX { mplsLpsConfigDomainIndex }
|
|
::= { mplsLpsConfigTable 1 }
|
|
|
|
MplsLpsConfigEntry ::= SEQUENCE {
|
|
mplsLpsConfigDomainIndex Unsigned32,
|
|
mplsLpsConfigDomainName SnmpAdminString,
|
|
mplsLpsConfigMode INTEGER,
|
|
mplsLpsConfigProtectionType INTEGER,
|
|
mplsLpsConfigRevertive INTEGER,
|
|
mplsLpsConfigSdThreshold Unsigned32,
|
|
mplsLpsConfigSdBadSeconds Unsigned32,
|
|
mplsLpsConfigSdGoodSeconds Unsigned32,
|
|
mplsLpsConfigWaitToRestore Unsigned32,
|
|
mplsLpsConfigHoldOff Unsigned32,
|
|
mplsLpsConfigContinualTxInterval Unsigned32,
|
|
mplsLpsConfigRapidTxInterval Unsigned32,
|
|
mplsLpsConfigCommand MplsLpsCommand,
|
|
mplsLpsConfigCreationTime TimeStamp,
|
|
mplsLpsConfigRowStatus RowStatus,
|
|
mplsLpsConfigStorageType StorageType
|
|
}
|
|
|
|
mplsLpsConfigDomainIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index for the conceptual row identifying a protection domain.
|
|
Operators should obtain new values for row creation in this
|
|
table by reading mplsLpsConfigDomainIndexNext.
|
|
|
|
When the value of this object is the same as the value of
|
|
mplsLpsMeConfigDomain, the mplsLpsMeConfigDomain is defined
|
|
as either the working path or the protection path for this
|
|
protection domain."
|
|
::= { mplsLpsConfigEntry 1 }
|
|
|
|
mplsLpsConfigDomainName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Textual name that represents the MPLS-TP linear protection
|
|
domain. It facilitates easy administrative identification of
|
|
each protection domain."
|
|
DEFVAL {""}
|
|
::= { mplsLpsConfigEntry 2 }
|
|
|
|
mplsLpsConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
psc(1),
|
|
aps(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of the MPLS-TP linear protection mechanism. This can
|
|
be either PSC or APS, as follows:
|
|
|
|
PSC
|
|
The Protection State Coordination mode as described in
|
|
RFC 6378.
|
|
|
|
APS
|
|
The Automatic Protection Switching mode as described in
|
|
RFC 7271.
|
|
|
|
This object may not be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1).
|
|
|
|
The value of this object is not supposed to be changed
|
|
during operation. When the value should be changed,
|
|
the protection processes in both LERs MUST be
|
|
restarted with the same new value.
|
|
|
|
If this value is changed at one LER during operation,
|
|
the LER will generate PSC packets with a new
|
|
Capabilities TLV value. This will result in
|
|
mplsLpsEventCapabilitiesMismatch notifications at both LERs."
|
|
REFERENCE
|
|
"Sections 9.2 and 10 of RFC 7271"
|
|
DEFVAL {psc}
|
|
::= { mplsLpsConfigEntry 3 }
|
|
|
|
mplsLpsConfigProtectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
onePlusOneUnidirectional(1),
|
|
oneColonOneBidirectional(2),
|
|
onePlusOneBidirectional(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protection architecture type of the protection domain.
|
|
This object represents both the bridge type, which can be
|
|
either a permanent bridge (1+1) or a selector bridge (1:1);
|
|
and the switching scheme, which can be either unidirectional
|
|
or bidirectional.
|
|
|
|
1+1
|
|
In the 1+1 protection scheme, a fully dedicated protection
|
|
path is allocated. Data traffic is copied and fed at the
|
|
source to both the working path and the protection path.
|
|
The traffic on the working path and protection path is
|
|
transmitted simultaneously to the sink of the protection
|
|
domain, where selection between the working path and the
|
|
protection path is performed.
|
|
|
|
1:1
|
|
In the 1:1 protection scheme, a protection path is allocated
|
|
to protect against a defect, failure, or degradation on the
|
|
working path. In normal conditions, data traffic is
|
|
transmitted over the working path, while the protection path
|
|
functions in the idle state. If there is a defect on the
|
|
working path or a specific administrative request,
|
|
traffic is switched to the protection path.
|
|
|
|
bidirectional
|
|
In the bidirectional protection scheme, both directions
|
|
will be switched simultaneously even if the fault applies
|
|
to only one direction of the path.
|
|
|
|
unidirectional
|
|
In the unidirectional protection scheme, protection switching
|
|
will be performed independently for each direction of a
|
|
bidirectional transport path.
|
|
|
|
This object may not be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Section 4.2.3 of RFC 6378"
|
|
DEFVAL {oneColonOneBidirectional}
|
|
::= { mplsLpsConfigEntry 4 }
|
|
|
|
mplsLpsConfigRevertive OBJECT-TYPE
|
|
SYNTAX INTEGER { nonrevertive(1), revertive(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the reversion mode of the linear
|
|
protection domain. The reversion mode of the protection
|
|
mechanism may be either revertive or non-revertive.
|
|
|
|
nonrevertive
|
|
In the non-revertive mode, after a service has been recovered,
|
|
traffic will be forwarded on the protection path.
|
|
|
|
revertive
|
|
In the revertive mode, after a service has been recovered,
|
|
traffic will be redirected back onto the original working
|
|
path.
|
|
|
|
This object may not be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Section 4.2.4 of RFC 6378"
|
|
DEFVAL { revertive }
|
|
::= { mplsLpsConfigEntry 5 }
|
|
|
|
mplsLpsConfigSdThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the threshold value of the Signal Degrade
|
|
(SD) defect in percent. In order to detect the SD defect,
|
|
the MPLS-TP packet loss measurement (LM) is performed
|
|
every second.
|
|
|
|
If either the packet loss is negative (i.e., there are more
|
|
packets received than transmitted) or the packet loss ratio
|
|
(lost packets/transmitted packets) in percent is greater than
|
|
this threshold value, a Bad Second is declared.
|
|
Otherwise, a Good Second is declared.
|
|
|
|
The SD defect is detected if there are
|
|
mplsLpsConfigSdBadSeconds consecutive Bad Seconds
|
|
and cleared if there are
|
|
mplsLpsConfigSdGoodSeconds consecutive Good Seconds.
|
|
|
|
This object may be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Clause 6.1.3.3 of ITU-T Recommendation G.8121/Y.1381 and
|
|
Table 8-1 of ITU-T Recommendation G.8151/Y.1374"
|
|
DEFVAL { 30 }
|
|
::= { mplsLpsConfigEntry 6 }
|
|
|
|
mplsLpsConfigSdBadSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32 (2..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the number of Bad Seconds to detect the SD.
|
|
|
|
If the number of consecutive Bad Seconds reaches this value,
|
|
the SD defect is detected and used as an input to
|
|
the protection switching process.
|
|
|
|
This object may be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Clause 6.1.3.3 of ITU-T Recommendation G.8121/Y.1381 and
|
|
Table 8-1 of ITU-T Recommendation G.8151/Y.1374"
|
|
DEFVAL { 10 }
|
|
::= { mplsLpsConfigEntry 7 }
|
|
|
|
mplsLpsConfigSdGoodSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32 (2..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the number of Good Seconds to declare
|
|
the clearance of an SD defect.
|
|
|
|
After an SD defect occurs on a path, if the number of
|
|
consecutive Good Seconds reaches this value for the
|
|
degraded path, the clearance of the SD defect is declared
|
|
and used as an input to the protection switching process.
|
|
|
|
This object may be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Clause 6.1.3.3 of ITU-T Recommendation G.8121/Y.1381 and
|
|
Table 8-1 of ITU-T Recommendation G.8151/Y.1374"
|
|
DEFVAL { 10 }
|
|
::= { mplsLpsConfigEntry 8 }
|
|
|
|
mplsLpsConfigWaitToRestore OBJECT-TYPE
|
|
SYNTAX Unsigned32 (5..12)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the Wait-to-Restore timer value in minutes
|
|
and can be configured in 1-minute intervals between 5 and
|
|
12 minutes.
|
|
|
|
The WTR timer is used to delay the reversion of the PSC state
|
|
to the Normal state when recovering from a failure condition
|
|
on the working path when the protection domain is configured
|
|
for revertive behavior.
|
|
|
|
This object may not be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Section 3.5 of RFC 6378"
|
|
DEFVAL { 5 }
|
|
::= { mplsLpsConfigEntry 9 }
|
|
|
|
mplsLpsConfigHoldOff OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "deciseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hold-off time in deciseconds. Represents the time
|
|
between SF/SD condition detection and declaration of
|
|
an SF/SD request to the protection switching logic.
|
|
It is intended to avoid unnecessary switching when a
|
|
lower-layer protection mechanism is in place.
|
|
Can be configured in intervals of 100 milliseconds.
|
|
|
|
When a new defect or a more severe defect occurs on
|
|
the active path (the path from which the selector selects
|
|
the user data traffic) and this value is non-zero,
|
|
the hold-off timer will be started. A defect on the standby
|
|
|
|
path (the path from which the selector does not select the
|
|
user data traffic) does not trigger the start of the hold-off
|
|
timer, as there is no need for a traffic switchover.
|
|
|
|
This object may not be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Section 3.1 of RFC 6378"
|
|
DEFVAL { 0 }
|
|
::= { mplsLpsConfigEntry 10 }
|
|
|
|
mplsLpsConfigContinualTxInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..20)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Continual Tx Time in seconds. Represents the time
|
|
interval to send the continual PSC packet to the other
|
|
end, based on the current state.
|
|
|
|
This object may not be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Section 4.1 of RFC 6378"
|
|
DEFVAL { 5 }
|
|
::= { mplsLpsConfigEntry 11 }
|
|
|
|
mplsLpsConfigRapidTxInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1000..20000)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Rapid Tx interval in microseconds. Represents the time
|
|
interval to send the PSC packet to the other end, when
|
|
there is a change in the state of the linear protection domain
|
|
due to local input. The default value is 3.3 milliseconds
|
|
(3300 microseconds).
|
|
|
|
This object may not be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Section 4.1 of RFC 6378"
|
|
DEFVAL { 3300 }
|
|
::= { mplsLpsConfigEntry 12 }
|
|
|
|
mplsLpsConfigCommand OBJECT-TYPE
|
|
SYNTAX MplsLpsCommand
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the initiation of an operator command on
|
|
the protection domain.
|
|
|
|
When read, this object returns the last command written
|
|
or noCmd if no command has been written since initialization.
|
|
The return of the last command written does not imply that
|
|
this command is currently in effect. This request may have
|
|
been preempted by a higher-priority local or remote request.
|
|
|
|
This object may be modified if the associated
|
|
mplsLpsConfigRowStatus object is equal to active(1)."
|
|
REFERENCE
|
|
"Sections 3.1 and 3.2 of RFC 6378 and Sections 4.3 and 6 of
|
|
RFC 7271"
|
|
DEFVAL { noCmd }
|
|
::= { mplsLpsConfigEntry 13 }
|
|
|
|
mplsLpsConfigCreationTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time the row was created."
|
|
::= { mplsLpsConfigEntry 14 }
|
|
|
|
mplsLpsConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the status of the MPLS-TP linear
|
|
protection domain entry. This variable is used to
|
|
create, modify, and/or delete a row in this table."
|
|
::= { mplsLpsConfigEntry 15 }
|
|
|
|
mplsLpsConfigStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Conceptual rows having the value 'permanent' need not
|
|
allow write access to any columnar objects in the row."
|
|
DEFVAL { nonVolatile }
|
|
::= { mplsLpsConfigEntry 16 }
|
|
|
|
--
|
|
-- MPLS-TP Linear Protection Switching Status Table.
|
|
-- This table provides protection domain statistics.
|
|
--
|
|
|
|
mplsLpsStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsLpsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides status information about MPLS-TP
|
|
linear protection domains that have been configured
|
|
on the system."
|
|
::= { mplsLpsObjects 3 }
|
|
|
|
mplsLpsStatusEntry OBJECT-TYPE
|
|
SYNTAX MplsLpsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the mplsLpsStatusTable."
|
|
AUGMENTS { mplsLpsConfigEntry }
|
|
::= { mplsLpsStatusTable 1 }
|
|
|
|
MplsLpsStatusEntry ::= SEQUENCE {
|
|
mplsLpsStatusState MplsLpsState,
|
|
mplsLpsStatusReqRcv MplsLpsReq,
|
|
mplsLpsStatusReqSent MplsLpsReq,
|
|
mplsLpsStatusFpathPathRcv MplsLpsFpathPath,
|
|
mplsLpsStatusFpathPathSent MplsLpsFpathPath,
|
|
mplsLpsStatusRevertiveMismatch TruthValue,
|
|
mplsLpsStatusProtecTypeMismatch TruthValue,
|
|
mplsLpsStatusCapabilitiesMismatch TruthValue,
|
|
mplsLpsStatusPathConfigMismatch TruthValue,
|
|
mplsLpsStatusFopNoResponses Counter32,
|
|
mplsLpsStatusFopTimeouts Counter32
|
|
}
|
|
|
|
mplsLpsStatusState OBJECT-TYPE
|
|
SYNTAX MplsLpsState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the PSC state machine."
|
|
REFERENCE
|
|
"Section 11 of RFC 7271"
|
|
::= { mplsLpsStatusEntry 1 }
|
|
|
|
mplsLpsStatusReqRcv OBJECT-TYPE
|
|
SYNTAX MplsLpsReq
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current value of the PSC Request field received on
|
|
the most recent PSC packet."
|
|
REFERENCE
|
|
"Section 4.2 of RFC 6378"
|
|
::= { mplsLpsStatusEntry 2 }
|
|
|
|
mplsLpsStatusReqSent OBJECT-TYPE
|
|
SYNTAX MplsLpsReq
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current value of the PSC Request field sent on the
|
|
most recent PSC packet."
|
|
REFERENCE
|
|
"Section 4.2 of RFC 6378"
|
|
::= { mplsLpsStatusEntry 3 }
|
|
|
|
mplsLpsStatusFpathPathRcv OBJECT-TYPE
|
|
SYNTAX MplsLpsFpathPath
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current value of the FPath and Path fields received
|
|
on the most recent PSC packet."
|
|
REFERENCE
|
|
"Section 4.2 of RFC 6378"
|
|
::= { mplsLpsStatusEntry 4 }
|
|
|
|
mplsLpsStatusFpathPathSent OBJECT-TYPE
|
|
SYNTAX MplsLpsFpathPath
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current value of the FPath and Path fields sent
|
|
on the most recent PSC packet."
|
|
REFERENCE
|
|
"Section 4.2 of RFC 6378"
|
|
::= { mplsLpsStatusEntry 5 }
|
|
|
|
mplsLpsStatusRevertiveMismatch OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates a provisioning mismatch in the
|
|
revertive mode across the protection domain endpoints.
|
|
The value of this object becomes true when a PSC message with
|
|
an incompatible Revertive field is received or false when a
|
|
PSC message with a compatible Revertive field is received."
|
|
REFERENCE
|
|
"Section 12 of RFC 7271"
|
|
::= { mplsLpsStatusEntry 6 }
|
|
|
|
mplsLpsStatusProtecTypeMismatch OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates a provisioning mismatch in the
|
|
protection type, representing both the bridge type and the
|
|
switching type, across the protection domain endpoints.
|
|
The value of this object becomes true when a PSC message with
|
|
an incompatible Protection Type (PT) field is received or
|
|
false when a PSC message with a compatible PT field is
|
|
received."
|
|
REFERENCE
|
|
"Section 12 of RFC 7271"
|
|
::= { mplsLpsStatusEntry 7 }
|
|
|
|
mplsLpsStatusCapabilitiesMismatch OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates a provisioning mismatch in
|
|
Capabilities TLVs across the protection domain endpoints.
|
|
The value of this object becomes true when a PSC message with
|
|
an incompatible Capabilities TLV field is received or false
|
|
when a PSC message with a compatible Capabilities TLV field is
|
|
received.
|
|
|
|
The Capabilities TLV with 0xF8000000 indicates that the APS
|
|
mode is used for the MPLS-TP linear protection mechanism,
|
|
whereas the PSC mode either (1) uses the Capabilities TLV
|
|
with a value of 0x0 or (2) does not use the Capabilities TLV
|
|
because the TLV does not exist."
|
|
REFERENCE
|
|
"Section 12 of RFC 7271"
|
|
::= { mplsLpsStatusEntry 8 }
|
|
|
|
mplsLpsStatusPathConfigMismatch OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates a provisioning mismatch in the
|
|
protection path configuration for PSC communication across
|
|
the protection domain endpoints.
|
|
|
|
The value of this object becomes true when a PSC message is
|
|
received from the working path or false when a PSC message
|
|
is received from the protection path."
|
|
REFERENCE
|
|
"Section 12 of RFC 7271"
|
|
::= { mplsLpsStatusEntry 9 }
|
|
|
|
mplsLpsStatusFopNoResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the number of occurrences of protocol
|
|
failure due to a lack of response to a traffic
|
|
switchover request within 50 ms.
|
|
|
|
When there is a traffic switchover due to a local request,
|
|
a 50 ms timer is started to detect protocol failure due to
|
|
no response. If there is no PSC message received with the
|
|
same Path value as the Path value in the transmitted
|
|
PSC message until the 50 ms timer expires, protocol failure
|
|
due to no response occurs."
|
|
REFERENCE
|
|
"Section 12 of RFC 7271"
|
|
::= { mplsLpsStatusEntry 10 }
|
|
|
|
mplsLpsStatusFopTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the number of occurrences of protocol
|
|
failure due to no PSC message being received during
|
|
at least 3.5 times the long PSC message interval.
|
|
|
|
When no PSC message is received on the protection path during
|
|
at least 3.5 times the long PSC message interval and there
|
|
is no defect on the protection path, protocol failure due to
|
|
no PSC message occurs."
|
|
REFERENCE
|
|
"Section 12 of RFC 7271"
|
|
::= { mplsLpsStatusEntry 11 }
|
|
|
|
-- MPLS-TP Linear Protection ME Association Configuration Table.
|
|
-- This table supports the addition, configuration, and deletion
|
|
-- of MPLS-TP linear protection MEs in protection domains.
|
|
|
|
mplsLpsMeConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsLpsMeConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists ME associations that have been configured
|
|
in protection domains."
|
|
::= { mplsLpsObjects 4 }
|
|
|
|
mplsLpsMeConfigEntry OBJECT-TYPE
|
|
SYNTAX MplsLpsMeConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the mplsLpsMeConfigTable. There is
|
|
a sparse relationship between the conceptual rows of
|
|
this table and the mplsOamIdMeTable.
|
|
|
|
Each time that an entry is created in the mplsOamIdMeTable
|
|
for which the LER supports MPLS-TP linear protection,
|
|
a row is created automatically in the mplsLpsMeConfigTable.
|
|
|
|
An entry in this table is related to a single entry in
|
|
the mplsOamIdMeTable. When a point-to-point transport path
|
|
needs to be monitored, one ME is needed for the path,
|
|
and one entry in the mplsOamIdMeTable will be created.
|
|
But the ME entry in the mplsOamIdMeTable may or may not
|
|
participate in protection switching.
|
|
|
|
If an ME participates in protection switching, an entry in
|
|
the mplsLpsMeConfigTable MUST be created, and the objects
|
|
in the entry indicate which protection domain this ME
|
|
belongs to and whether this ME is for the working path or
|
|
the protection path.
|
|
|
|
If the ME does not participate in protection switching,
|
|
an entry in the mplsLpsMeConfigTable does not need
|
|
to be created."
|
|
INDEX {mplsOamIdMegIndex, mplsOamIdMeIndex, mplsOamIdMeMpIndex}
|
|
::= { mplsLpsMeConfigTable 1 }
|
|
|
|
MplsLpsMeConfigEntry ::= SEQUENCE {
|
|
mplsLpsMeConfigDomain Unsigned32,
|
|
mplsLpsMeConfigPath INTEGER
|
|
}
|
|
|
|
mplsLpsMeConfigDomain OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the mplsLpsConfigDomainIndex value for
|
|
the protection domain in which this ME is included.
|
|
If this ME is not part of any protection domain, then
|
|
this object contains the value 0.
|
|
|
|
When the value of this object is the same as the value of
|
|
mplsLpsConfigDomainIndex, the object is defined as either
|
|
the working path or the protection path of the
|
|
protection domain corresponding to mplsLpsConfigDomainIndex."
|
|
DEFVAL { 0 }
|
|
::= { mplsLpsMeConfigEntry 1 }
|
|
|
|
mplsLpsMeConfigPath OBJECT-TYPE
|
|
SYNTAX INTEGER { working(1), protection(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether the ME is configured
|
|
as the working path or the protection path."
|
|
REFERENCE
|
|
"Section 4.3 of RFC 6378"
|
|
::= { mplsLpsMeConfigEntry 2 }
|
|
|
|
--
|
|
-- MPLS Linear Protection ME Status Table.
|
|
-- This table provides protection switching ME statistics.
|
|
--
|
|
|
|
mplsLpsMeStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsLpsMeStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains status information of all the MEs
|
|
that are included in MPLS-TP linear protection domains."
|
|
::= { mplsLpsObjects 5 }
|
|
|
|
mplsLpsMeStatusEntry OBJECT-TYPE
|
|
SYNTAX MplsLpsMeStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the mplsLpsMeStatusTable."
|
|
AUGMENTS { mplsLpsMeConfigEntry }
|
|
::= { mplsLpsMeStatusTable 1 }
|
|
|
|
MplsLpsMeStatusEntry ::= SEQUENCE {
|
|
mplsLpsMeStatusCurrent BITS,
|
|
mplsLpsMeStatusSignalDegrades Counter32,
|
|
mplsLpsMeStatusSignalFailures Counter32,
|
|
mplsLpsMeStatusSwitchovers Counter32,
|
|
mplsLpsMeStatusLastSwitchover TimeStamp,
|
|
mplsLpsMeStatusSwitchoverSeconds Counter32
|
|
}
|
|
|
|
mplsLpsMeStatusCurrent OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
localSelectTraffic(0),
|
|
localSD(1),
|
|
localSF(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current state of the ME.
|
|
|
|
localSelectTraffic
|
|
This bit indicates that traffic is being selected from
|
|
this ME.
|
|
|
|
localSD
|
|
This bit implies that a local Signal Degrade condition is
|
|
in effect on this ME/path.
|
|
|
|
localSF
|
|
This bit implies that a local Signal Fail condition is
|
|
in effect on this ME/path."
|
|
REFERENCE
|
|
"Section 4.3 of RFC 6378 and Section 7 of RFC 7271"
|
|
::= { mplsLpsMeStatusEntry 1 }
|
|
|
|
mplsLpsMeStatusSignalDegrades OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the count of Signal Degrade conditions.
|
|
For the detection and clearance of Signal Degrade,
|
|
see the description of mplsLpsConfigSdThreshold."
|
|
REFERENCE
|
|
"Section 7 of RFC 7271"
|
|
::= { mplsLpsMeStatusEntry 2 }
|
|
|
|
mplsLpsMeStatusSignalFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the count of Signal Fail conditions.
|
|
This condition occurs when the OAM running on this ME
|
|
detects the Signal Fail event."
|
|
REFERENCE
|
|
"Section 4.3 of RFC 6378"
|
|
::= { mplsLpsMeStatusEntry 3 }
|
|
|
|
mplsLpsMeStatusSwitchovers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the count of switchovers that happened in this ME.
|
|
|
|
When the mplsLpsMeConfigPath value is 'working', this object
|
|
will return the number of times that traffic has been
|
|
switched from this working path to the protection path.
|
|
|
|
When the mplsLpsMeConfigPath value is 'protection', this
|
|
object will return the number of times that traffic has been
|
|
switched back to the working path from this protection path."
|
|
REFERENCE
|
|
"Section 4.3 of RFC 6378"
|
|
::= { mplsLpsMeStatusEntry 4 }
|
|
|
|
mplsLpsMeStatusLastSwitchover OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object holds the value of sysUpTime at the time that
|
|
the last switchover happened.
|
|
|
|
When the mplsLpsMeConfigPath value is 'working', this object
|
|
will return the value of sysUpTime when traffic was switched
|
|
from this path to the protection path.
|
|
|
|
If traffic has never switched to the protection path, the
|
|
value 0 will be returned.
|
|
|
|
When the mplsLpsMeConfigPath value is 'protection', this
|
|
object will return the value of sysUpTime the last time that
|
|
traffic was switched back to the working path from this path.
|
|
If no traffic has ever switched back to the working path from
|
|
this protection path, the value 0 will be returned."
|
|
REFERENCE
|
|
"Section 4.3 of RFC 6378"
|
|
::= { mplsLpsMeStatusEntry 5 }
|
|
|
|
mplsLpsMeStatusSwitchoverSeconds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cumulative Protection Switching Duration (PSD) time
|
|
in seconds.
|
|
|
|
For the working path, this is the cumulative number of
|
|
seconds that traffic was selected from the protection path.
|
|
|
|
For the protection path, this is the cumulative number
|
|
of seconds that the working path has been used to
|
|
select traffic."
|
|
REFERENCE
|
|
"Section 4.3 of RFC 6378"
|
|
::= { mplsLpsMeStatusEntry 6 }
|
|
|
|
mplsLpsNotificationEnable OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
switchover(0),
|
|
revertiveMismatch(1),
|
|
protecTypeMismatch(2),
|
|
capabilitiesMismatch(3),
|
|
pathConfigMismatch(4),
|
|
fopNoResponse(5),
|
|
fopTimeout(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides the ability to enable and disable notifications
|
|
defined in this MIB module.
|
|
|
|
switchover
|
|
Indicates that mplsLpsEventSwitchover notifications should be
|
|
generated.
|
|
|
|
revertiveMismatch
|
|
Indicates that mplsLpsEventRevertiveMismatch notifications
|
|
should be generated.
|
|
|
|
protecTypeMismatch
|
|
Indicates that mplsLpsEventProtecTypeMismatch notifications
|
|
should be generated.
|
|
|
|
capabilitiesMismatch
|
|
Indicates that mplsLpsEventCapabilitiesMismatch notifications
|
|
should be generated.
|
|
|
|
pathConfigMismatch
|
|
Indicates that mplsLpsEventPathConfigMismatch notifications
|
|
should be generated.
|
|
|
|
fopNoResponse
|
|
Indicates that mplsLpsEventFopNoResponse notifications should
|
|
be generated.
|
|
|
|
fopTimeout
|
|
Indicates that mplsLpsEventFopTimeout notifications should be
|
|
generated."
|
|
REFERENCE
|
|
"Section 12 of RFC 7271"
|
|
DEFVAL { { } }
|
|
::= { mplsLpsObjects 6 }
|
|
|
|
-- MPLS Linear Protection EVENTS.
|
|
|
|
mplsLpsEventSwitchover NOTIFICATION-TYPE
|
|
OBJECTS { mplsLpsMeStatusSwitchovers, mplsLpsMeStatusCurrent }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An mplsLpsEventSwitchover notification is sent when the
|
|
value of an instance of mplsLpsMeStatusSwitchovers
|
|
increments."
|
|
::= { mplsLpsNotifications 1 }
|
|
|
|
mplsLpsEventRevertiveMismatch NOTIFICATION-TYPE
|
|
OBJECTS { mplsLpsStatusRevertiveMismatch }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An mplsLpsEventRevertiveMismatch notification is sent when
|
|
the value of mplsLpsStatusRevertiveMismatch changes."
|
|
::= { mplsLpsNotifications 2 }
|
|
|
|
mplsLpsEventProtecTypeMismatch NOTIFICATION-TYPE
|
|
OBJECTS { mplsLpsStatusProtecTypeMismatch }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An mplsLpsEventProtecTypeMismatch notification is sent
|
|
when the value of mplsLpsStatusProtecTypeMismatch changes."
|
|
::= { mplsLpsNotifications 3 }
|
|
|
|
mplsLpsEventCapabilitiesMismatch NOTIFICATION-TYPE
|
|
OBJECTS { mplsLpsStatusCapabilitiesMismatch }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An mplsLpsEventCapabilitiesMismatch notification is sent
|
|
when the value of mplsLpsStatusCapabilitiesMismatch changes."
|
|
::= { mplsLpsNotifications 4 }
|
|
|
|
mplsLpsEventPathConfigMismatch NOTIFICATION-TYPE
|
|
OBJECTS { mplsLpsStatusPathConfigMismatch }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An mplsLpsEventPathConfigMismatch notification is sent
|
|
when the value of mplsLpsStatusPathConfigMismatch changes."
|
|
::= { mplsLpsNotifications 5 }
|
|
|
|
mplsLpsEventFopNoResponse NOTIFICATION-TYPE
|
|
OBJECTS { mplsLpsStatusFopNoResponses }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An mplsLpsEventFopNoResponse notification is sent when the
|
|
value of mplsLpsStatusFopNoResponses increments."
|
|
::= { mplsLpsNotifications 6 }
|
|
|
|
mplsLpsEventFopTimeout NOTIFICATION-TYPE
|
|
OBJECTS { mplsLpsStatusFopTimeouts }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An mplsLpsEventFopTimeout notification is sent when the
|
|
value of mplsLpsStatusFopTimeouts increments."
|
|
::= { mplsLpsNotifications 7 }
|
|
|
|
-- End of Notifications.
|
|
|
|
-- Module Compliance.
|
|
|
|
mplsLpsCompliances
|
|
OBJECT IDENTIFIER ::= { mplsLpsConformance 1 }
|
|
|
|
mplsLpsGroups
|
|
OBJECT IDENTIFIER ::= { mplsLpsConformance 2 }
|
|
|
|
-- Compliance requirement for fully compliant implementations.
|
|
|
|
mplsLpsModuleFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents that provide full support for
|
|
the MPLS-LPS-MIB module. Such devices can provide linear
|
|
protection and also be configured using this MIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
mplsLpsScalarGroup,
|
|
mplsLpsTableGroup,
|
|
mplsLpsMeTableGroup
|
|
}
|
|
GROUP mplsLpsNotificationGroup
|
|
DESCRIPTION
|
|
"This group is only mandatory for those
|
|
implementations that can efficiently implement
|
|
the notifications contained in this group."
|
|
::= { mplsLpsCompliances 1 }
|
|
|
|
-- Compliance requirement for read-only implementations.
|
|
|
|
mplsLpsModuleReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents that only provide
|
|
read-only support for the MPLS-LPS-MIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
mplsLpsScalarGroup,
|
|
mplsLpsTableGroup,
|
|
mplsLpsMeTableGroup
|
|
}
|
|
GROUP mplsLpsNotificationGroup
|
|
DESCRIPTION
|
|
"This group is only mandatory for those
|
|
implementations that can efficiently implement
|
|
the notifications contained in this group."
|
|
|
|
-- mplsLpsConfigTable
|
|
|
|
OBJECT mplsLpsConfigMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigProtectionType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigRevertive
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigSdThreshold
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigSdBadSeconds
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigSdGoodSeconds
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigWaitToRestore
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigContinualTxInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigRapidTxInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigCommand
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsConfigStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
-- mplsLpsMeConfigTable
|
|
|
|
OBJECT mplsLpsMeConfigDomain
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLpsMeConfigPath
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { mplsLpsCompliances 2 }
|
|
|
|
-- Units of conformance.
|
|
|
|
mplsLpsScalarGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsLpsConfigDomainIndexNext,
|
|
mplsLpsNotificationEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS linear protection."
|
|
::= { mplsLpsGroups 1 }
|
|
|
|
mplsLpsTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsLpsConfigDomainName,
|
|
mplsLpsConfigRowStatus,
|
|
mplsLpsConfigMode,
|
|
mplsLpsConfigProtectionType,
|
|
mplsLpsConfigRevertive,
|
|
mplsLpsConfigSdThreshold,
|
|
mplsLpsConfigSdBadSeconds,
|
|
mplsLpsConfigSdGoodSeconds,
|
|
mplsLpsConfigWaitToRestore,
|
|
mplsLpsConfigHoldOff,
|
|
mplsLpsConfigContinualTxInterval,
|
|
mplsLpsConfigRapidTxInterval,
|
|
mplsLpsConfigCommand,
|
|
mplsLpsConfigCreationTime,
|
|
mplsLpsConfigStorageType,
|
|
mplsLpsStatusState,
|
|
mplsLpsStatusReqRcv,
|
|
mplsLpsStatusReqSent,
|
|
mplsLpsStatusFpathPathRcv,
|
|
mplsLpsStatusFpathPathSent,
|
|
mplsLpsStatusRevertiveMismatch,
|
|
mplsLpsStatusProtecTypeMismatch,
|
|
mplsLpsStatusCapabilitiesMismatch,
|
|
mplsLpsStatusPathConfigMismatch,
|
|
mplsLpsStatusFopNoResponses,
|
|
mplsLpsStatusFopTimeouts
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS linear protection
|
|
configuration and statistics."
|
|
::= { mplsLpsGroups 2 }
|
|
|
|
mplsLpsMeTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsLpsMeConfigDomain,
|
|
mplsLpsMeConfigPath,
|
|
mplsLpsMeStatusCurrent,
|
|
mplsLpsMeStatusSignalDegrades,
|
|
mplsLpsMeStatusSignalFailures,
|
|
mplsLpsMeStatusSwitchovers,
|
|
mplsLpsMeStatusLastSwitchover,
|
|
mplsLpsMeStatusSwitchoverSeconds
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for MPLS linear protection
|
|
ME configuration and statistics."
|
|
::= { mplsLpsGroups 3 }
|
|
|
|
mplsLpsNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
mplsLpsEventSwitchover,
|
|
mplsLpsEventRevertiveMismatch,
|
|
mplsLpsEventProtecTypeMismatch,
|
|
mplsLpsEventCapabilitiesMismatch,
|
|
mplsLpsEventPathConfigMismatch,
|
|
mplsLpsEventFopNoResponse,
|
|
mplsLpsEventFopTimeout
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed to implement notifications."
|
|
::= { mplsLpsGroups 4 }
|
|
|
|
-- MPLS-LPS-MIB module ends
|
|
END
|