WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/rfc/CM-GATEWAY-MIB

2608 lines
91 KiB
Plaintext
Raw Blame History

--
-- (c) 2002 Motorola, Inc.
--
--
-- CM Gw MIB
--
CM-GATEWAY-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, OBJECT-TYPE, MODULE-IDENTITY, Unsigned32, Integer32, Counter32
FROM SNMPv2-SMI
MacAddress, RowStatus, DisplayString, TruthValue, PhysAddress, TimeStamp, DateAndTime
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddressType, InetAddress, InetPortNumber, InetAddressIPv6
FROM INET-ADDRESS-MIB;
--
-- Path to root
--
gi OBJECT IDENTIFIER ::= {enterprises 1166}
giproducts OBJECT IDENTIFIER ::= {gi 1}
cm OBJECT IDENTIFIER ::= {giproducts 19}
cmGw MODULE-IDENTITY
LAST-UPDATED "201306070000Z" -- June 07, 2013
ORGANIZATION
"Motorola BCS"
CONTACT-INFO
"Author: Greg Nakanishi
Org: Motorola BCS
postal: 6450 Sequence Drive
San Diego, CA 92121
email: gnakanishi@motorola.com
phone: 858-404-2366"
DESCRIPTION
"This MIB defines additional gateway management objects that are extended
based on CableHome MIBs."
REVISION "201306070000Z" -- June 07, 2013
DESCRIPTION
"Edited by Lisa Ruby - OKCABLECPEMIB-424
- Added MIB object cmGwAdvCfgParentalControl"
REVISION "201306070000Z" -- June 07, 2013
DESCRIPTION
"Edited by Lisa Ruby - OKCABLECPEMIB-421
- Modified MIB object cmGwFirewallProtectEnable"
REVISION "201306070000Z" -- June 07, 2013
DESCRIPTION
"Edited by Lisa Ruby - OKCABLECPEMIB-420
- Added MIB object cmGwIPv6FirewallProtectEnable"
REVISION "201212130000Z" -- Dec 13, 2012
DESCRIPTION
"Edited by Richard DiBenedetto - OKCABLECPEMIB-398.
- Commented below MIB objects
- cmGwLanPoolStartType
- cmGwDhcpServerSubnetMaskType
- cmGwDhcpServerDhcpAddressType. "
REVISION "201212120000Z" -- December 12, 2012
DESCRIPTION
"Edited by Lisa Ruby - OKCABLECPEMIB-407
- Added objects for JIRA JSBG2186
- Added MIB object cmGwProvErouterIPv6PassthruMode"
REVISION "201212040000Z" -- December 04, 2012
DESCRIPTION
"Edited by Tang He - OKCABLECPEMIB-407
- Added object for JIRA JSBG2191
- Added MIB object cmGwProvErouterMode"
REVISION "201204170000Z" -- April 17, 2012
DESCRIPTION
"Edited by Tang He.
- Added MIB jira1449
- Added MIB object cmGwDsliteEnabled
- Added MIB object cmGwDsliteAftrAddress
- Added MIB object cmGwDslitePcpMode
- Added MIB object cmGwDsliteTcpMssClamping
- Added MIB object cmGwDsliteIPv4FragEnabled."
REVISION "201204110000Z" -- April 11, 2012
DESCRIPTION
"Edited by Yangchen Bao - OKCABLECPEMIB-367.
- Changed description of cmGwVirtualServerEntry
- Added MIB object cmGwVirtualServerUSBAppsPort."
REVISION "201112190000Z"
DESCRIPTION
"Edited by Sabari and Kokila.
- Added MIB cqvds00026693
- Added MIB object cmGwAdvCfgIpsecPassThroughEnable
- Added MIB object cmGwAdvCfgPptpPassThroughEnable."
REVISION "201105240000Z"
DESCRIPTION
"Edited by Uma and Kokila.
- Added MIB cqvds00025508
- Added MIB object cmGwFirewallProtectionLevel."
REVISION "200911170000Z"
DESCRIPTION
"Edited by P. Rajiv and Mithun.
- Modified for cqvds00019728
- cmGwProvDeviceProvisioningMode
- cmGwProvDeviceConfigStatus
- cmGwProvDeviceConfigFilename."
REVISION "200906100000Z"
DESCRIPTION
"Edited by Uma.
- Modified MIB cqvds00016124
- cmGwPortTriggerRowStatus
- cmGwFiltersIpFilterRowStatus
- cmGwFiltersPortFilterRowStatus."
REVISION "200904280000Z"
DESCRIPTION
"Edited by Uma.
- Added MIB cqvds00015056
- Added MIB group cmGwFiltersMib
- Added MIB group cmGwFiltersIpFilter.
- Added MIB group cmGwFiltersMacFilter.
- Added MIB group cmGwFiltersPortFilter.
- Added MIB group cmGwFirewallMib.
- Added MIB group cmGwPortTriggerMib.
- Added MIB object cmGwVirtualServerProtocol
- Modified Description cmGwAlgPredefinedTable."
REVISION "200901200000Z"
DESCRIPTION
"Edited by Lisa Ruby.
- Added MIB cqvds00013177
- Added cmGwAdvCfgMib
- Added cmGwAdvCfgObjects
- Added cmGwAdvCfgUPnP."
REVISION "200811180000Z"
DESCRIPTION
"Edited by Chen Yang.
- Added MIB cqvds00011643
- Added cmGwAlgPredefinedMib
- Added cmGwAlgPredfinedObjects
- Added cmGwAlgPredefinedTable
- Added cmGwAlgPredefinedEntry
- Added cmGwAlgPredefinedIndex
- Added cmGwAlgPredefinedName
- Added cmGwAlgPredefinedEnable."
REVISION "200307150000Z"
DESCRIPTION
"Edited by Jason Krasnow.
Published as cmGateway-40.mib
Changed default of cmGwLanDhcpsInterfaceMTU to 0. Also updated the object's description.
"
REVISION "200212090000Z"
DESCRIPTION
"Edited by Zheng Fang.
Published as cmGateway-28.mib.
- Per SCR668, remove cmGwNatMappingServerId, cmGwNatMappingEnable and bump
cmGwNatMappingRowStatus OID to next one of cmGwNatMappingProtocol; add
cmGwNatMappingWanAddrType and cmGwNatMappingWanAddr per exising GUI.
- Per SCR669, add cmGwVirtualServerEntry.
- Per SYS, remove cmGwLanAddrDMZEnable.
"
REVISION "200210040000Z"
DESCRIPTION
"Edited by Zheng Fang.
Published as cmGateway-22.mib.
- Sync with CH ECNs per CW24 requirements:
- Per CH1-N-02017, update descriptions of cmGwNatMappingRowStatus and cmGwNatPassthroughRowStatus.
- Per CH1-N-02009, update descriptions of cmGwNatMappingLanAddr, cmGwNatMappingLanAddrType and
cmGwLanAddrClientID, and update description and default value for cmGwLanDhcpsLeaseTime;
change DisplayString to SnmpAdminString;
add cmGwLanDhcpsNetworkNumberType and cmGwLanDhcpsNetworkNumber.
"
::= {cm 52}
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--
-- BIG NOTES:
-- All objects defined here only accessible when device is in gateway mode.
-- All writable objects must be maintained non-volatile memory.
--
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- Administrative assignments ----------------------
cmGwObjects OBJECT IDENTIFIER ::= { cmGw 1 }
cmGwConformance OBJECT IDENTIFIER ::= { cmGw 2 }
--
-- Standard MIB mirror zone
--
cmGwBaseMib OBJECT IDENTIFIER ::= { cmGwObjects 1 }
cmGwDhcpMib OBJECT IDENTIFIER ::= { cmGwObjects 2 }
cmGwNatMib OBJECT IDENTIFIER ::= { cmGwObjects 3 }
cmGwLogMib OBJECT IDENTIFIER ::= { cmGwObjects 4 }
--
-- End of mirror zone
--
cmGwAlgMib OBJECT IDENTIFIER ::= { cmGwObjects 1000 }
cmGwVirtualServerMib OBJECT IDENTIFIER ::= { cmGwObjects 1001 }
cmGwAlgPredefinedMib OBJECT IDENTIFIER ::= { cmGwObjects 1002 }
cmGwAdvCfgMib OBJECT IDENTIFIER ::= { cmGwObjects 1003 }
cmGwPortTriggerMib OBJECT IDENTIFIER ::= { cmGwObjects 1004 }
cmGwFiltersMib OBJECT IDENTIFIER ::= { cmGwObjects 1005 }
cmGwFirewallMib OBJECT IDENTIFIER ::= { cmGwObjects 1006 }
cmGwProvisioningMib OBJECT IDENTIFIER ::= { cmGwObjects 1007 }
cmGwDsliteMib OBJECT IDENTIFIER ::= { cmGwObjects 1008 }
--
-- Object definitions ------------------------------
--
--
-- PS DEV mirror tree
--
cmGwWanMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WAN MAC address."
::= { cmGwBaseMib 1 }
cmGwWanSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes the WAN default
options to be returned back to factory defaults.
Reading this object always returns false(2).
The following object values are reset when cmGwWanSetToFactory is set to
'true'. cmGwWanDhcpcAdminStatus is set to it's default value. The values
of the remaining objects are all cleared. Strings are set to NULL and
IP addresses are set to 0.0.0.0.
cmGwWanDhcpcAdminStatus,
cmGwWanInetAddressType,
cmGwWanInetAddress,
cmGwWanHostName,
cmGwWanSubnetMaskType,
cmGwWanSubnetMask,
cmGwWanRouterType,
cmGwWanRouter
All entries in cmGwWanDnsServerTable will be destroyed.
All reset defaults will not take effect until the unit is rebooted.
"
::= { cmGwBaseMib 2 }
cmGwWanDhcpcAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object controls whether the WAN DHCP client in the device is enabled.
If enabled, the device attempts to acquire network configuration
from the network. If disabled, the configuration of the device must
be performed manually."
DEFVAL { enabled }
::= { cmGwBaseMib 3 }
--========================================================================
--
-- cmGwWanAddr
--
--=========================================================================
cmGwWanInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type assigned to the gateway WAN interface.
When cmGwWanDhcpcAdminStatus is enabled, this object is read-only."
::= { cmGwBaseMib 4 }
cmGwWanInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address assigned to the gateway WAN interface.
When cmGwWanDhcpcAdminStatus is enabled, this object is read-only."
::= { cmGwBaseMib 5 }
cmGwWanHostName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The host name of the gateway WAN interface."
::= { cmGwBaseMib 6 }
cmGwWanSubnetMaskType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask address type assigned to the gateway WAN interface.
When cmGwWanDhcpcAdminStatus is enabled, this object is read-only."
::= { cmGwBaseMib 7 }
cmGwWanSubnetMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask address assigned to the gateway WAN interface.
When cmGwWanDhcpcAdminStatus is enabled, this object is read-only."
::= { cmGwBaseMib 8 }
cmGwWanRouterType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router address type assigned to the gateway WAN interface.
When cmGwWanDhcpcAdminStatus is enabled, this object is read-only."
::= { cmGwBaseMib 9 }
cmGwWanRouter OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router address assigned to the gateway WAN interface.
When cmGwWanDhcpcAdminStatus is enabled, this object is read-only."
::= { cmGwBaseMib 10 }
--========================================================================
--
-- cmGwWanDnsServerTable
--
-- The cmGwWanDnsServerTable contains a table of referral DNS Servers.
--
--=========================================================================
cmGwWanDnsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwWanDnsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When cmGwWanDhcpcAdminStatus is set to enabled, this contains
the IP addresses used for the WAN DNS hosts
obtained via the DHCP option 6 during the WAN interface
configuration process. A maximum of three entries is supported .
When cmGwWanDhcpcAdminStatus is set to disabled, this contains
the IP addresses set by the GUI or NMS. A maximum of three entries are
supported by GUI and NMS."
::= { cmGwBaseMib 12 }
cmGwWanDnsServerEntry OBJECT-TYPE
SYNTAX CmGwWanDnsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of WAN DNS Hosts."
INDEX {cmGwWanAddrDnsServerOrder}
::= { cmGwWanDnsServerTable 1 }
CmGwWanDnsServerEntry ::= SEQUENCE {
cmGwWanAddrDnsServerOrder INTEGER,
cmGwWanAddrDnsIpType InetAddressType,
cmGwWanAddrDnsIp InetAddress,
cmGwWanAddrDnsRowStatus RowStatus
}
cmGwWanAddrDnsServerOrder OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The order of preference for Internet DNS servers, as listed in
DHCP option 6 (Domain Server) or entered by a user through the
GUI/NMS. Any time valid IP address information is recieved within
DHCP Option 6, as part of lease acquisition or
renewal of a WAN interface IP, it must update this information
into this table. As entries in DHCP Option 6 are listed in
order of preference the highest priority entry in DHCP
Option 6 must correspond to the row with a
cmGwWanAddrDnsServerOrder with a value of 1. If DHCP
Option 6 contains 2 valid IP addresses, the agent must update
the rows with cmGwWanAddrDnsServerOrder values of 1 and 2.
If DHCP Option 6 contains 3 valid IP addresses, the agent must
update rows with cmGwWanAddrDnsServerOrder values of 1, 2,
and 3. Any DNS server information included in DHCP Option 6
beyond primary, secondary and tertiary will not be
represented in this table. A GUI user will only be able to
enter 3 IP addresses."
::= { cmGwWanDnsServerEntry 1 }
cmGwWanAddrDnsIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter indicates the IP address type of a DNS server."
::= { cmGwWanDnsServerEntry 2 }
cmGwWanAddrDnsIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter indicates the IP address of a DNS server."
::= { cmGwWanDnsServerEntry 3 }
cmGwWanAddrDnsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for creation and deletion.
When cmGwWanDhcpcAdminStatus is enabled, this object is read-only."
::= { cmGwWanDnsServerEntry 4 }
--
-- CDP mirror tree
--
-- Textual conventions
CmGwLanClientId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"DHCP option61 information."
SYNTAX OCTET STRING (SIZE (1..80))
cmGwDhcpObjects OBJECT IDENTIFIER ::= { cmGwDhcpMib 1 }
cmGwDhcpBase OBJECT IDENTIFIER ::= { cmGwDhcpObjects 1 }
cmGwDhcpServer OBJECT IDENTIFIER ::= { cmGwDhcpObjects 2 }
cmGwDhcpAddr OBJECT IDENTIFIER ::= { cmGwDhcpObjects 3 }
cmGwLanDhcpsSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes the LAN DHCP server default
options to be returned back to factory defaults and all
current mappings to use the factory default settings at
the next lease renewal time. Reading this object always
returns false(2).
The objects set to factory defaults are:
cmGwLanDhcpsAddressPoolStartType,
cmGwLanDhcpsAddressPoolStart,
cmGwLanDhcpsSubnetMaskType,
cmGwLanDhcpsSubnetMask,
cmGwLanDhcpsDomainName,
cmGwLanDhcpsTTL,
cmGwLanDhcpsInterfaceMTU,
cmGwLanDhcpsLeaseTime,
cmGwLanDhcpsInetAddressType,
cmGwLanDhcpsInetAddress,
cmGwLanDhcpsMaxAddressCount
cmGwLanDhcpsControl
All entries in cmGwLanAddrTable will be destroyed and default entries
will be created if any.
"
::= { cmGwDhcpBase 1 }
--
-- DHCP Server Side Option Values for the LAN-side realm
--
cmGwLanDhcpsAddressPoolStartType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Address type of the start of range LAN IP Addresses."
DEFVAL { ipv4 }
::= { cmGwDhcpServer 1 }
cmGwLanDhcpsAddressPoolStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start of the range of LAN-side IP Addresses."
DEFVAL { 'c0a80002'h } -- 192.168.0.2
--192.168.0.0 is the network number
-- 192.168.0.255 is broadcast
-- address and 192.168.0.1
-- is reserved for the router
::= { cmGwDhcpServer 2 }
cmGwLanDhcpsNetworkNumberType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address type of the LAN-Trans network number."
DEFVAL { ipv4 }
::= { cmGwDhcpServer 3 }
cmGwLanDhcpsNetworkNumber OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LAN-Trans network number."
DEFVAL { 'c0a80000'h } --192.168.0.0
::= { cmGwDhcpServer 4 }
cmGwLanDhcpsSubnetMaskType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of LAN-side Subnet Mask."
DEFVAL { ipv4 }
::= { cmGwDhcpServer 5 }
cmGwLanDhcpsSubnetMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP option value 1 - Value of LAN-side Subnet Mask."
DEFVAL { 'ffffff00'h } -- 255.255.255.0
::= { cmGwDhcpServer 6 }
cmGwLanDhcpsDomainName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP option value 15 - Domain name of LAN-side address realm."
DEFVAL {""}
::= { cmGwDhcpServer 7 }
cmGwLanDhcpsTTL OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP option value 23 - LAN-side Time to Live."
DEFVAL { 64 }
::= { cmGwDhcpServer 8 }
cmGwLanDhcpsInterfaceMTU OBJECT-TYPE
SYNTAX INTEGER (0 | 68..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP option value 26 - LAN-side Interface MTU. If the value
of this object is 0, the DHCP server must not include this
option in its DHCP Offer or DHCP Ack message to LAN IP Devices"
DEFVAL { 0 }
::= { cmGwDhcpServer 9 }
cmGwLanDhcpsLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 51 -Lease Time for LAN IP Devices on the LAN side."
DEFVAL { 3600 }
::= { cmGwDhcpServer 10 }
cmGwLanDhcpsInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP option value 54 - Type of LAN-side DHCP server IP address."
DEFVAL { ipv4 }
::= { cmGwDhcpServer 11 }
cmGwLanDhcpsInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP option value 54 - LAN-side DHCP server IP
address."
DEFVAL { 'c0a80001'h } -- 192.168.0.1
::= { cmGwDhcpServer 12 }
cmGwLanDhcpsMaxAddressCount OBJECT-TYPE
SYNTAX Unsigned32 (1..253)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of LAN-side leased IP addresses."
DEFVAL { 253 }
::= { cmGwDhcpServer 13 }
cmGwLanDhcpsCurrentLeaseCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of LAN-side leased IP addresses.
This is a count of LAN side addresses."
::= { cmGwDhcpServer 14 }
cmGwLanDhcpsControl OBJECT-TYPE
SYNTAX INTEGER {
restoreConfig(1),
commitConfig(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control for the DHCP Server configuration. All changes to the cmGwDhcpServer mib objects
are reflected when reading the value of the mib objects; however, those changes are NOT applied to the
running configuration of the DHCP Server until they are successfully committed via use of the
cwGwLanDhcpsControl object.
If changes are made to the cmGwDhcpServer mib objects which are not successfully committed to the
DHCP Server, the cmGwLanDhcpsControl object can be used to rollback all changes to the last
valid DHCP Server configuration and discard all intermediate changes.
restoreConfig - Setting cmGwLanDhcpsControl to this value will cause any changes to the
cmGwDhcpServer objects not yet committed to be reset to the values from the current running
configuration of the DHCP Server.
commitConfig - Setting cmGwLanDhcpsControl to this value will cause the DHCP Server to
validate and apply the valid cmGwDhcpServer mib settings to its running configuration. The
cmGwLanDhcpsCommitStatus object will detail the status of this operation."
DEFVAL { restoreConfig }
::= { cmGwDhcpServer 15 }
cmGwLanDhcpsCommitStatus OBJECT-TYPE
SYNTAX INTEGER {
commitSucceeded(1),
commitNeeded(2),
commitFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the commiting the current cmGwDhcpServer mib object values to the running
configuration of the DHCP Server.
commitSucceeded - indicates the current cmGwDhcpServer mib object values are valid
and have been successfully committed to the running configuration of the DHCP Server.
commitNeeded - indicates that the value of one or more objects in cmGwDhcpServer
mib group have been changed but not yet committed to the running configuration
of the DHCP Server.
commitFailed - indicates the PS was unable to commit the cabhCdpServer mib
object values to the running configuration of the DHCP Server due to conflicts in those
values."
DEFVAL { commitSucceeded }
::= { cmGwDhcpServer 16 }
--
-- CDP Address Management Tables
--
--========================================================================
--
-- cmGwLanAddrTable
--
-- This table contains a list of entries for the LAN side DHCP parameters.
-- These parameters can be set either by the NMS or the GUI.
--
--=========================================================================
cmGwLanAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwLanAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a list of LAN-side realm parameters."
::= { cmGwDhcpAddr 1 }
cmGwLanAddrEntry OBJECT-TYPE
SYNTAX CmGwLanAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of general parameters for DHCP mappings."
INDEX { cmGwLanAddrIpType, cmGwLanAddrIp }
::= { cmGwLanAddrTable 1 }
CmGwLanAddrEntry ::= SEQUENCE {
cmGwLanAddrIpType InetAddressType,
cmGwLanAddrIp InetAddress,
cmGwLanAddrClientID CmGwLanClientId,
cmGwLanAddrLeaseCreateTime DateAndTime,
cmGwLanAddrLeaseExpireTime DateAndTime,
cmGwLanAddrMethod INTEGER,
cmGwLanAddrHostName SnmpAdminString,
cmGwLanAddrRowStatus RowStatus
}
cmGwLanAddrIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type assigned on the LAN side for the DHCP Address
Table."
::= { cmGwLanAddrEntry 1 }
cmGwLanAddrIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address assigned on the LAN side for the DHCP Address
Table."
::= { cmGwLanAddrEntry 2 }
cmGwLanAddrClientID OBJECT-TYPE
SYNTAX CmGwLanClientId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The client ID as indicated in Option 61 of the DHCP Discover.
There is a one-to-one relationship between the Client ID and
the assigned LAN address. This parameter is entered by the DHCP server
when it grants a lease to a LAN IP Device on the LAN side
and creates a row in this table. Alternatively, this parameter
can be created by the NMS, when the NMS creates
a new DHCP address reservation by accessing the cmGwLanAddrRowStatus
object with an index comprised of a new cmGwLanAddrIp and its IP type and
setting a new cmGwLanAddrClientID."
::= { cmGwLanAddrEntry 3 }
cmGwLanAddrLeaseCreateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is only set when the cmGwLanAddrTable
entry is created and the entry does not already exist. In
other words, this value is not overwritten at lease renewal
time."
::= { cmGwLanAddrEntry 4 }
cmGwLanAddrLeaseExpireTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the time that the LAN side lease expires. When
the lease expires this entry will be deleted from the table."
::= { cmGwLanAddrEntry 5 }
cmGwLanAddrMethod OBJECT-TYPE
SYNTAX INTEGER {
staticInactive (1),
staticActive(2),
dynamicInactive (3),
dynamicActive (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The method that created this Address Entry and the status of the
lease. staticInactive(1) indicates that configuration through the NMS/GUI
established this row (entry) and the IP has not yet been reserved or the lease
has expired. staticActive(2) indicates that configuration through the NMS/GUI
established this row (entry) and the IP lease is currently active.
dynamicInactive(3) indicates that a DHCP discover established this row (entry) and
that it is currently an expired IP lease. dynamicActive(4) indicates that a DHCP
discover established this row (entry) and the IP lease is currently active."
::= { cmGwLanAddrEntry 6 }
cmGwLanAddrHostName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the Host Name of the LAN IP address, based on DCHP option 12."
::= { cmGwLanAddrEntry 7 }
cmGwLanAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for creation and deletion."
::= { cmGwLanAddrEntry 8 }
--
-- CAP mirror tree
--
-- Textual conventions
CmGwNatPacketMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The mapping type established when
a binding/mapping is established."
SYNTAX INTEGER {
napt (1), -- NAT with port translation
--nat (2), Basic NAT is not available in the gateway mode
passthrough (3) -- Pass Through External Address
}
cmGwNatObjects OBJECT IDENTIFIER ::= { cmGwNatMib 1 }
cmGwNatBase OBJECT IDENTIFIER ::= { cmGwNatObjects 1 }
cmGwNatMap OBJECT IDENTIFIER ::= { cmGwNatObjects 2 }
--====================================================================
--
-- General NAPT Parameters
--
--====================================================================
cmGwNatSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes all the NAPT tables
to be cleared, and all NAPT objects with defaults to be reset back to
their default values.
The objects set to factory defaults are:
cmGwNatTcpTimeWait,
cmGwNatUdpTimeWait,
cmGwNatIcmpTimeWait,
cmGwNatPrimaryMode,
cmGwNatGamingDMZIpAddrType,
cmGwNatGamingDMZIpAddr
All entries in cmGwNatPassthroughTable
will be destroyed. The default entries will be created if any.
"
::= { cmGwNatBase 1 }
cmGwNatTcpTimeWait OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the maximum inactivity time to wait before assuming TCP
session is terminated. It has no relation to the TCP session TIME_WAIT
state referred to in [FC793]"
DEFVAL { 86400 } -- 24 hours
::= { cmGwNatBase 2 }
cmGwNatUdpTimeWait OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time to wait before assuming UDP
session is terminated."
DEFVAL { 300 } -- 5 minutes
::= { cmGwNatBase 3 }
cmGwNatIcmpTimeWait OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inactivity time to wait before destroying mappings for ICMP."
DEFVAL { 300 } -- 5 minutes
::= { cmGwNatBase 4 }
cmGwNatPrimaryMode OBJECT-TYPE
SYNTAX CmGwNatPacketMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Primary Packet Handling Mode to be used."
DEFVAL { napt }
::= { cmGwNatBase 5 }
cmGwNatGamingDMZIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type assigned to cmGwNatGamingDMZIpAddr."
DEFVAL { ipv4 }
::= { cmGwNatBase 6 }
cmGwNatGamingDMZIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ip address of the NAT'd Gaming DMZ host which is the default port
forwarder and bypasses the firewall."
DEFVAL { '00000000'h }
::= { cmGwNatBase 7 }
--========================================================================
--
-- cmGwNatMappingTable
--
-- The cmGwNatMappingTable contains the mappings for all NAPT mappings.
--
--=========================================================================
cmGwNatMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwNatMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains IP address and port translation information
for all address translation mappings."
::= { cmGwNatMap 1 }
cmGwNatMappingEntry OBJECT-TYPE
SYNTAX CmGwNatMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of IP address translation and port translation mappings."
INDEX { cmGwNatMappingIndex }
::= { cmGwNatMappingTable 1 }
CmGwNatMappingEntry ::= SEQUENCE {
cmGwNatMappingIndex INTEGER,
cmGwNatMappingWanAddrType InetAddressType,
cmGwNatMappingWanAddr InetAddress,
cmGwNatMappingWanPort InetPortNumber,
cmGwNatMappingLanAddrType InetAddressType,
cmGwNatMappingLanAddr InetAddress,
cmGwNatMappingLanPort InetPortNumber,
cmGwNatMappingMethod INTEGER,
cmGwNatMappingProtocol INTEGER,
cmGwNatMappingRowStatus RowStatus
}
cmGwNatMappingIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index into the Mapping Table."
::= { cmGwNatMappingEntry 1 }
cmGwNatMappingWanAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type assigned on the WAN side. IP version
4 is typically used."
DEFVAL { ipv4 }
::= { cmGwNatMappingEntry 2 }
cmGwNatMappingWanAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address assigned on the WAN side. IP version 4
is typically used."
::= { cmGwNatMappingEntry 3 }
cmGwNatMappingWanPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP/UDP port number on the WAN side."
DEFVAL { 0 }
::= { cmGwNatMappingEntry 4 }
cmGwNatMappingLanAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type assigned on the LAN side."
DEFVAL { ipv4 }
::= { cmGwNatMappingEntry 5 }
cmGwNatMappingLanAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address assigned on the LAN side.
This parameter is entered by the DHCP server when it grants a lease to a
LAN IP Device on the LAN side and creates a row in this table.
Alternatively, this parameter can be created by the NMS,
when the NMS creates a new DHCP address reservation by accessing the
cmGwNatMappingRowStatus object with an index comprised of a new
cmGwNatMappingLanAddr and its Type."
::= { cmGwNatMappingEntry 6 }
cmGwNatMappingLanPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP/UDP port number on the LAN side."
DEFVAL { 0 }
::= { cmGwNatMappingEntry 7 }
cmGwNatMappingMethod OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dynamic (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates how this mapping was created. Static means that it was provisioned, and dynamic
means that it was handled by the gateway itself."
::= { cmGwNatMappingEntry 8 }
cmGwNatMappingProtocol OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- not specified
icmp (2),
udp (3),
tcp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol for this mapping."
::= { cmGwNatMappingEntry 9 }
cmGwNatMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RowStatus interlock for the creation and deletion of a cmGwNatMappingTable entry.
Changing the value of the IP address or port number columns of the Gateway NAT Mapping
Table may have an effect on active traffic, so the SNMP entity will prevent modification of this
table's columns when the cmGwNatMappingRowStatus object is in the active state."
::={ cmGwNatMappingEntry 10 }
--========================================================================
--
-- cmGwNatPassthroughTable
--
-- The cmGwNatPassthroughTable contains the MAC Addresses for all LAN-IP Devices
-- which will be configured as passthrough.
--
--=========================================================================
cmGwNatPassthroughTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwNatPassthroughEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MAC addresses for LAN-IP Devices which are configured
as passthrough mode."
::= { cmGwNatMap 2 }
cmGwNatPassthroughEntry OBJECT-TYPE
SYNTAX CmGwNatPassthroughEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of hardware addresses for LAN IP Devices which are configured as passthrough mode."
INDEX {cmGwNatPassthroughIndex }
::= { cmGwNatPassthroughTable 1 }
CmGwNatPassthroughEntry ::= SEQUENCE {
cmGwNatPassthroughIndex INTEGER,
cmGwNatPassthroughMACAddr PhysAddress,
cmGwNatPassthroughDMZEnable TruthValue,
cmGwNatPassthroughRowStatus RowStatus
}
cmGwNatPassthroughIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into the passthrough table."
::= {cmGwNatPassthroughEntry 1 }
cmGwNatPassthroughMACAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MAC Address of LAN-IP Device to be configured as passthrough mode."
::= {cmGwNatPassthroughEntry 2 }
cmGwNatPassthroughDMZEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this value is set to true, traffic for this device will not be firewalled."
::= {cmGwNatPassthroughEntry 3 }
cmGwNatPassthroughRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for the creation and deletion
of a cmGwNatPassthroughTable entry. There are no
restrictions on setting the read-create column of this table
(i.e., cmGwNatPassthroughMACAddr ) when the status
of cabhCapPassthroughRowStatus is active."
::= { cmGwNatPassthroughEntry 4 }
--
-- DOCSIS DEV mirror tree
--
--
-- Event Reporting
--
cmGwDevEvent OBJECT IDENTIFIER ::= { cmGwLogMib 1 }
cmGwDevEvControl OBJECT-TYPE
SYNTAX INTEGER {
resetLog(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to resetLog(1) empties the event log.
All data is deleted. Reading this object always returns
resetLog(1)."
::= { cmGwDevEvent 1 }
cmGwDevEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwDevEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a log of network and device events that may be
of interest in fault isolation and troubleshooting."
::= { cmGwDevEvent 2 }
cmGwDevEventEntry OBJECT-TYPE
SYNTAX CmGwDevEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes a network or device event that may be of
interest in fault isolation and troubleshooting. Multiple
sequential identical events are represented by
incrementing cmGwDevEvCounts and setting
cmGwDevEvLastTime to the current time rather than creating
multiple rows.
Entries are created with the first occurrance of an event.
cmGwDevEvControl can be used to clear the table.
Individual events can not be deleted."
INDEX { cmGwDevEvIndex }
::= { cmGwDevEventTable 1 }
CmGwDevEventEntry ::= SEQUENCE {
cmGwDevEvIndex Integer32,
cmGwDevEvFirstTime DateAndTime,
cmGwDevEvLastTime DateAndTime,
cmGwDevEvCounts Counter32,
cmGwDevEvLevel INTEGER,
cmGwDevEvId Unsigned32,
cmGwDevEvText SnmpAdminString
}
cmGwDevEvIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides relative ordering of the objects in the event
log. This object will always increase except when
(a) the log is reset via cmGwDevEvControl,
(b) the device reboots and does not implement non-volatile
storage for this log, or (c) it reaches the value 2^31.
The next entry for all the above cases is 1."
::= { cmGwDevEventEntry 1 }
cmGwDevEvFirstTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that this entry was created."
::= { cmGwDevEventEntry 2 }
cmGwDevEvLastTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If multiple events are reported via the same entry, the
time that the last event for this entry occurred,
otherwise this should have the same value as
cmGwDevEvFirstTime. "
::= { cmGwDevEventEntry 3 }
-- This object was renamed from cmGwDevEvCount to meet naming
-- requirements for Counter32
cmGwDevEvCounts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of consecutive event instances reported by
this entry. This starts at 1 with the creation of this
row and increments by 1 for each subsequent duplicate
event."
::= { cmGwDevEventEntry 4 }
cmGwDevEvLevel OBJECT-TYPE
SYNTAX INTEGER {
emergency(1),
alert(2),
critical(3),
error(4),
warning(5),
notice(6),
information(7),
debug(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority level of this event as defined by the
vendor. These are ordered from most serious (emergency)
to least serious (debug)."
::= { cmGwDevEventEntry 5 }
--
-- Gateway DS lite information
--
cmGwDsliteObjects OBJECT IDENTIFIER ::= { cmGwDsliteMib 1 }
cmGwDsliteEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disable DS-lite support in the device."
::= { cmGwDsliteObjects 1 }
cmGwDsliteAftrAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv6 address of the AFTR endpoint of the DS-lite tunnel."
::= { cmGwDsliteObjects 2 }
cmGwDslitePcpMode OBJECT-TYPE
SYNTAX INTEGER {
plain(1),
encapsulation(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PCP (Port Control Protocol) operational mode"
DEFVAL { plain }
::= { cmGwDsliteObjects 3 }
cmGwDsliteTcpMssClamping OBJECT-TYPE
SYNTAX INTEGER (0..1420)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether TCP MSS clamping is enabled on the interface.
0 disables clamping, 1 clamps the MSS depending on the
interface MTU. A value > 1 will be used as clamping size."
DEFVAL { 0 }
::= { cmGwDsliteObjects 4 }
cmGwDsliteIPv4FragEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disable IPv4 fragmentation in DS-Lite"
::= { cmGwDsliteObjects 5 }
--
-- Vendors will provide their own enumerations for the following.
-- The interpretation of the enumeration is unambiguous for a
-- particular value of the vendor's enterprise number in sysObjectID.
--
cmGwDevEvId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For this product, uniquely identifies the type of event
that is reported by this entry."
::= { cmGwDevEventEntry 6 }
cmGwDevEvText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides a human-readable description of the event,
including all relevant context (interface numbers,
etc.)."
::= { cmGwDevEventEntry 7 }
--
-- Application Level Gw information
--
cmGwAlgObjects OBJECT IDENTIFIER ::= { cmGwAlgMib 1 }
cmGwAlgSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes all Port Trigger entries to be cleared to default values.
Reading this object always returns false(2).
"
::= { cmGwAlgObjects 1 }
cmGwAlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwAlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of ALGs (Port Triggers) supported by this device.
This table currently supports up to 47 configureable entries.
The first 15 entries are predefined and only cmGwAlgEnable field can be modified
by NMS/GUI.
The rest of additional 32 entries along with writable field objects are user configureable.
"
::= { cmGwAlgObjects 2 }
cmGwAlgEntry OBJECT-TYPE
SYNTAX CmGwAlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies parameters about an ALG (Port Trigger) ."
INDEX { cmGwAlgIndex }
::= { cmGwAlgTable 1 }
CmGwAlgEntry ::=
SEQUENCE {
cmGwAlgIndex
Unsigned32,
cmGwAlgName
SnmpAdminString,
cmGwAlgProtocol
INTEGER,
cmGwAlgPortFrom
InetPortNumber,
cmGwAlgPortTo
InetPortNumber,
cmGwAlgSessionChaining
INTEGER,
cmGwAlgSessionInterval
Unsigned32,
cmGwAlgAddressReplacement
INTEGER,
cmGwAlgMultipleHostEnable
TruthValue,
cmGwAlgEnable
TruthValue,
cmGwAlgStatus
RowStatus
}
cmGwAlgIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..47)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this ALG (Port Trigger)."
::= { cmGwAlgEntry 1 }
cmGwAlgName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Unique name for this ALG (Port Trigger)."
DEFVAL { "" }
::= { cmGwAlgEntry 2 }
cmGwAlgProtocol OBJECT-TYPE
SYNTAX INTEGER
{
tcp(1),
udp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol type for this ALG (Port Trigger)."
DEFVAL { udp }
::= { cmGwAlgEntry 3 }
cmGwAlgPortFrom OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start port for this ALG (Port Trigger)."
::= { cmGwAlgEntry 4 }
cmGwAlgPortTo OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End port for this ALG (Port Trigger)."
::= { cmGwAlgEntry 5 }
cmGwAlgSessionChaining OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
tcp(2),
tcpAndUdp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Control session chaining for this ALG (Port Trigger)."
DEFVAL { disabled }
::= { cmGwAlgEntry 6 }
cmGwAlgSessionInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..30000)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Control session interval in seconds for this ALG (Port Trigger)."
DEFVAL { 3600 }
::= { cmGwAlgEntry 7 }
cmGwAlgAddressReplacement OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
tcp(2),
udp(3),
tcpAndUdp(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls the type of address replacement to be performed for this ALG (Port Trigger)."
DEFVAL { tcpAndUdp }
::= { cmGwAlgEntry 8 }
cmGwAlgMultipleHostEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set to true to only allow new Port Trigger session initiated from/to the same remote host.
Set to false to allow new session initated from/to different remote hosts."
DEFVAL { false }
::= { cmGwAlgEntry 9 }
cmGwAlgEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set to true to enable this Alg (Port Trigger).
Set to false to disable this Alg (Port Trigger)."
DEFVAL { true }
::= { cmGwAlgEntry 10 }
cmGwAlgStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls the creation and modification of Port Trigger entries in this table.
To change any ALG(Port Trigger) MIB objects will require cmGwAlgStatus to set to
'not-in-service' and reset back to 'active' in order to populate Port Trigger entry
correctly with the latest Port Trigger data."
::= { cmGwAlgEntry 11 }
--
-- Virtual Server Gw information
--
cmGwVirtualServerObjects OBJECT IDENTIFIER ::= { cmGwVirtualServerMib 1 }
cmGwVirtualServerSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes all Port Forwarding entries to be cleared
to default values. Reading this object always returns false(2)."
::= { cmGwVirtualServerObjects 1 }
cmGwVirtualServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwVirtualServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of virtual server (Port Forwarding) entry supported by this device.
This table currently supports 32 configureable entries.
"
::= { cmGwVirtualServerObjects 2 }
cmGwVirtualServerEntry OBJECT-TYPE
SYNTAX CmGwVirtualServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies parameters about a virtual server (Port Forwarding).
Note: For products that support USB applications, the first entry in this table is
reserved for internal use and may not be replaced, modified, or deleted."
INDEX { cmGwVirtualServerIndex }
::= { cmGwVirtualServerTable 1 }
CmGwVirtualServerEntry ::= SEQUENCE {
cmGwVirtualServerIndex INTEGER,
cmGwVirtualServerName SnmpAdminString,
cmGwVirtualServerType INTEGER,
cmGwVirtualServerPort1 InetPortNumber,
cmGwVirtualServerPort2 InetPortNumber,
cmGwVirtualServerLanAddrType InetAddressType,
cmGwVirtualServerLanAddr InetAddress,
cmGwVirtualServerEnable TruthValue,
cmGwVirtualServerRowStatus RowStatus,
cmGwVirtualServerProtocol INTEGER
}
cmGwVirtualServerIndex OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index into the virtual server (Port Forwarding) Table."
::= { cmGwVirtualServerEntry 1 }
cmGwVirtualServerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..10))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The server name for this virtual server (Port Forwarding) entry.
The server name can be empty string."
DEFVAL { "" }
::= { cmGwVirtualServerEntry 2 }
cmGwVirtualServerType OBJECT-TYPE
SYNTAX INTEGER {
wanPortRange(1)
-- portTranslation(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates how cmGwVirtualServerPort1 and cmGwVirtualServerPort2 used.
wanPortRange(1) means that cmGwVirtualServerPort1 is the starting WAN port range
and cmGwVirtualServerPort2 is the ending WAN port range."
DEFVAL { wanPortRange }
::= { cmGwVirtualServerEntry 3 }
cmGwVirtualServerPort1 OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TCP/UDP port number 1."
DEFVAL { 0 }
::= { cmGwVirtualServerEntry 4 }
cmGwVirtualServerPort2 OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TCP/UDP port number 2."
DEFVAL { 0 }
::= { cmGwVirtualServerEntry 5 }
cmGwVirtualServerLanAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address type assigned on the LAN side."
DEFVAL { ipv4 }
::= { cmGwVirtualServerEntry 6 }
cmGwVirtualServerLanAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address assigned on the LAN side.
The first 3 octets default value should be the LAN Private IP Address (192.168.0)
and 0 for the last octet.
The last octet has to be changed to some value within the configured range
other than 0 when the entry is set to active."
DEFVAL {"192.168.0.0"}
::= { cmGwVirtualServerEntry 7 }
cmGwVirtualServerEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set to true to enable this virtual server (Port Forwarding) entry.
Set to false to disable this virtual server (Port Forwarding) entry."
DEFVAL { true }
::= { cmGwVirtualServerEntry 8 }
cmGwVirtualServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for the creation and deletion of a cmGwVirtualServerTable entry.
The SNMP entity will prevent modification of this table's columns when the cmGwVirtualServerRowStatus
object is in the active state.
To change any Virtual Server(Port Forwarding) MIB objects will require cmGwVirtualServerRowStatus to set to
'not-in-service' and reset back to 'active' in order to populate Port Forwarding entry
correctly with the latest Port Forwarding data."
::={ cmGwVirtualServerEntry 9 }
cmGwVirtualServerProtocol OBJECT-TYPE
SYNTAX INTEGER
{
tcp(1),
udp(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol type for this virtual server (Port Forwarding) entry."
::={ cmGwVirtualServerEntry 10 }
cmGwVirtualServerUSBAppsPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP/UDP port number used to create a port forwarding table entry to allow
users access to the internal USB_Apps GUI pages from the internet."
DEFVAL { 9880 }
::= { cmGwVirtualServerObjects 3 }
--
-- Application Level Gateway Predefined information
--
cmGwAlgPredfinedObjects OBJECT IDENTIFIER ::= { cmGwAlgPredefinedMib 1 }
cmGwAlgPredefinedTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwAlgPredefinedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of predefined ALGs supported by this device.
Note: This table contains predefined entries for true NAT ALGs (Application Level
Gateways) for protocols that embed the host IP address inside the protocol data of
the IP packet. The cmGwPortTriggeTable that is also in this MIB handles NAT Port Triggers,
not the types of ALGs supported by this table. This table only allows for the
enabling/disabling of the predefined ALGs. It does not allow for the creation of
new ALGs."
::= { cmGwAlgPredfinedObjects 1 }
cmGwAlgPredefinedEntry OBJECT-TYPE
SYNTAX CmGwAlgPredefinedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies parameters about a predefined ALG."
INDEX { cmGwAlgPredefinedIndex }
::= { cmGwAlgPredefinedTable 1 }
CmGwAlgPredefinedEntry ::=
SEQUENCE {
cmGwAlgPredefinedIndex
Unsigned32,
cmGwAlgPredefinedName
SnmpAdminString,
cmGwAlgPredefinedEnable
TruthValue
}
cmGwAlgPredefinedIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this predefined ALG."
::= { cmGwAlgPredefinedEntry 1 }
cmGwAlgPredefinedName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique name for this predefined ALG."
::= { cmGwAlgPredefinedEntry 2 }
cmGwAlgPredefinedEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to true to enable this predefined ALG.
Set to false to disable this predefined ALG."
::= { cmGwAlgPredefinedEntry 3 }
--
-- Advanced Config Objects Predefined information
--
cmGwAdvCfgObjects OBJECT IDENTIFIER ::= { cmGwAdvCfgMib 1 }
cmGwAdvCfgUPnPEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) enables UPnP on the Gateway device.
Setting this object to false(2) disables UPnP on the Gateway device."
::= { cmGwAdvCfgObjects 1 }
cmGwAdvCfgIpsecPassThroughEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) enables Internet Protocol Security (Ipsec)
passthrough on the Gateway device.
Setting this object to false(2) disables Internet Protocol Security (Ipsec)
passthrough on the Gateway device."
::= { cmGwAdvCfgObjects 2 }
cmGwAdvCfgPptpPassThroughEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) enables Point-to-Point Tunneling
Protocol (PPTP) passthrough on the Gateway device.
Setting this object to false(2) disables Point-to-Point Tunneling
Protocol (PPTP) passthrough on the Gateway device."
::= { cmGwAdvCfgObjects 3 }
cmGwAdvCfgParentalControl OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the status mib of the current state of the Parental Control Settings
that are stored in NonVol. The format will be delimited by a ;.
The first value will be if the parental control is Enabled or Disabled,
then it will display the number of rules, and lastly display the number
of users if there are any users in the Parental Control.
For example: Enabled; 5 rules; 3 users"
::= { cmGwAdvCfgObjects 4 }
--
-- Port Trigger information
--
cmGwPortTriggerObjects OBJECT IDENTIFIER ::= { cmGwPortTriggerMib 1 }
cmGwPortTriggerSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes all Port Trigger entries to be cleared.
Reading this object always returns false(2)."
::= { cmGwPortTriggerObjects 1 }
cmGwPortTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwPortTriggerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Port Triggers supported by this device."
::= { cmGwPortTriggerObjects 2 }
cmGwPortTriggerEntry OBJECT-TYPE
SYNTAX CmGwPortTriggerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies parameters for a Port Trigger."
INDEX { cmGwPortTriggerIndex }
::= { cmGwPortTriggerTable 1 }
CmGwPortTriggerEntry ::=
SEQUENCE {
cmGwPortTriggerIndex
Unsigned32,
cmGwPortTriggerStartPortTriggerRange
InetPortNumber,
cmGwPortTriggerEndPortTriggerRange
InetPortNumber,
cmGwPortTriggerStartPortTargetRange
InetPortNumber,
cmGwPortTriggerEndPortTargetRange
InetPortNumber,
cmGwPortTriggerProtocol
INTEGER,
cmGwPortTriggerEnable
TruthValue,
cmGwPortTriggerRowStatus
RowStatus
}
cmGwPortTriggerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this Port Trigger."
::= { cmGwPortTriggerEntry 1 }
cmGwPortTriggerStartPortTriggerRange OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start port of Trigger Range for this Port Trigger. Trigger Range defines the range of ports
that will act as a trigger to open the ports set by Target Range."
::= { cmGwPortTriggerEntry 2 }
cmGwPortTriggerEndPortTriggerRange OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End port of Trigger Range for this Port Trigger. Trigger Range defines the range of ports
that will act as a trigger to open the ports set by Target Range."
::= { cmGwPortTriggerEntry 3 }
cmGwPortTriggerStartPortTargetRange OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start port of Target Range for this Port Trigger. When the gateway detects outgoing data on
a specific port number set in the Trigger Range(cmGwPortTriggerStartPortTriggerRange - cmGwPortTriggerEndPortTriggerRange),
the resulting ports set in Target Range(cmGwPortTriggerStartPortTargetRange - cmGwPortTriggerEndPortTargetRange)
are opened for incoming data."
::= { cmGwPortTriggerEntry 4 }
cmGwPortTriggerEndPortTargetRange OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End port of Target Range for this Port Trigger. When the gateway detects outgoing data on a
specific port number set in the Trigger Range(cmGwPortTriggerStartPortTriggerRange - cmGwPortTriggerEndPortTriggerRange),
the resulting ports set in Target Range(cmGwPortTriggerStartPortTargetRange - cmGwPortTriggerEndPortTargetRange)
are opened for incoming data."
::= { cmGwPortTriggerEntry 5 }
cmGwPortTriggerProtocol OBJECT-TYPE
SYNTAX INTEGER
{
tcp(1),
udp(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol type for this Port Trigger."
::= { cmGwPortTriggerEntry 6 }
cmGwPortTriggerEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set to true to enable this Port Trigger.
Set to false to disable this Port Trigger."
DEFVAL { true }
::= { cmGwPortTriggerEntry 7 }
cmGwPortTriggerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for the creation and deletion of a cmGwPortTriggerTable entry.
The SNMP entity will prevent modification of this table's columns when cmGwPortTriggerRowStatus
object is in the active state.
To change any columns of this table, cmGwPortTriggerRowStatus must be set to
'not-in-service' and then set back to 'active' in order to populate Port Trigger entry
correctly with the latest Port Trigger data."
::= { cmGwPortTriggerEntry 8 }
cmGwFiltersObjects OBJECT IDENTIFIER ::= { cmGwFiltersMib 1 }
cmGwFiltersIpFilter OBJECT IDENTIFIER ::= { cmGwFiltersObjects 1 }
--
-- IP Filtering information
--
cmGwFiltersIpFilterSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes all IP Filter entries in cmGwIpFilterTable to be
cleared.
Reading this object always returns false(2)."
::= { cmGwFiltersIpFilter 1 }
cmGwFiltersIpFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwFiltersIpFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of IP address filters used to block internet traffic to specific network devices
on the LAN."
::= { cmGwFiltersIpFilter 2 }
cmGwFiltersIpFilterEntry OBJECT-TYPE
SYNTAX CmGwFiltersIpFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies parameters for an IP address filter."
INDEX { cmGwFiltersIpFilterIndex }
::= { cmGwFiltersIpFilterTable 1 }
CmGwFiltersIpFilterEntry ::=
SEQUENCE {
cmGwFiltersIpFilterIndex
Unsigned32,
cmGwFiltersIpFilterAddressType
InetAddressType,
cmGwFiltersIpFilterStartAddress
InetAddress,
cmGwFiltersIpFilterEndAddress
InetAddress,
cmGwFiltersIpFilterEnable
TruthValue,
cmGwFiltersIpFilterRowStatus
RowStatus
}
cmGwFiltersIpFilterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this IP address filter."
::= { cmGwFiltersIpFilterEntry 1 }
cmGwFiltersIpFilterAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address type assigned on the LAN side."
DEFVAL { ipv4 }
::= { cmGwFiltersIpFilterEntry 2 }
cmGwFiltersIpFilterStartAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Start IP address for this IP address filter. This address must be within the range of
LAN side IP addresses."
::= { cmGwFiltersIpFilterEntry 3 }
cmGwFiltersIpFilterEndAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The End IP address for this IP filter. This address must be within the range of
LAN side IP addresses."
::= { cmGwFiltersIpFilterEntry 4 }
cmGwFiltersIpFilterEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set to true to enable this IP Filter.
Set to false to disable this IP Filter."
DEFVAL { true }
::= { cmGwFiltersIpFilterEntry 5 }
cmGwFiltersIpFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for the creation and deletion of a cmGwFiltersIpFilterTable entry.
The SNMP entity will prevent modification of this table's columns when cmGwFiltersIpFilterRowStatus
object is in the active state.
To change any columns of this table, cmGwFiltersIpFilterRowStatus must be set to
'not-in-service' and then set back to 'active' in order to populate IP Filter entry
correctly with the latest IP Filter data."
::={ cmGwFiltersIpFilterEntry 6 }
--
-- MAC Filtering information
--
cmGwFiltersMacFilter OBJECT IDENTIFIER ::= { cmGwFiltersObjects 2 }
cmGwFiltersMacFilterSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes all MAC Filter entries in cmGwMacFilterTable to be
cleared.
Reading this object always returns false(2)."
::= { cmGwFiltersMacFilter 1 }
cmGwFiltersMacFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwFiltersMacFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of MAC address filters used to block internet traffic to specific network devices
on the LAN."
::= { cmGwFiltersMacFilter 2 }
cmGwFiltersMacFilterEntry OBJECT-TYPE
SYNTAX CmGwFiltersMacFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies MAC address of the network device to be blocked from internet access."
INDEX { cmGwFiltersMacFilterIndex }
::= { cmGwFiltersMacFilterTable 1 }
CmGwFiltersMacFilterEntry ::=
SEQUENCE {
cmGwFiltersMacFilterIndex
Unsigned32,
cmGwFiltersMacFilterMacAddress
PhysAddress,
cmGwFiltersMacFilterRowStatus
RowStatus
}
cmGwFiltersMacFilterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this MAC address filter."
::= { cmGwFiltersMacFilterEntry 1 }
cmGwFiltersMacFilterMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MAC address of the network device to be blocked from internet access."
::= { cmGwFiltersMacFilterEntry 2 }
cmGwFiltersMacFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"There are no restrictions on setting the read-create columns of this table
when the status of cmGwMacFilterRowStatus is 'active'."
::={ cmGwFiltersMacFilterEntry 3 }
--
-- Port Filtering information
--
cmGwFiltersPortFilter OBJECT IDENTIFIER ::= { cmGwFiltersObjects 3 }
cmGwFiltersPortFilterSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes all Port Filter entries in cmGwPortFilterTable to be
cleared.
Reading this object always returns false(2)."
::= { cmGwFiltersPortFilter 1 }
cmGwFiltersPortFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmGwFiltersPortFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Port filters used to block specific internet services to all devices on the LAN.
These are outbound Port Filters that prevent LAN devices from sending outgoing traffic
to the WAN on specified port numbers."
::= { cmGwFiltersPortFilter 2 }
cmGwFiltersPortFilterEntry OBJECT-TYPE
SYNTAX CmGwFiltersPortFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies parameters about a Port filtering rule."
INDEX { cmGwFiltersPortFilterIndex }
::= { cmGwFiltersPortFilterTable 1 }
CmGwFiltersPortFilterEntry ::=
SEQUENCE {
cmGwFiltersPortFilterIndex
Unsigned32,
cmGwFiltersPortFilterStartPort
InetPortNumber,
cmGwFiltersPortFilterEndPort
InetPortNumber,
cmGwFiltersPortFilterProtocol
INTEGER,
cmGwFiltersPortFilterEnable
TruthValue,
cmGwFiltersPortFilterRowStatus
RowStatus
}
cmGwFiltersPortFilterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this Port Filter."
::= { cmGwFiltersPortFilterEntry 1 }
cmGwFiltersPortFilterStartPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start Port Number for this Port Filter."
::= { cmGwFiltersPortFilterEntry 2 }
cmGwFiltersPortFilterEndPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End Port Number for this Port Filter."
::= { cmGwFiltersPortFilterEntry 3 }
cmGwFiltersPortFilterProtocol OBJECT-TYPE
SYNTAX INTEGER
{
tcp(1),
udp(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol type for this Port Filter."
::= { cmGwFiltersPortFilterEntry 4 }
cmGwFiltersPortFilterEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set to true to enable this Port Filter.
Set to false to disable this Port Filter."
DEFVAL { true }
::= { cmGwFiltersPortFilterEntry 5 }
cmGwFiltersPortFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for the creation and deletion of a cmGwFiltersPortFilterTable entry.
The SNMP entity will prevent modification of this table's columns when cmGwFiltersPortFilterRowStatus
object is in the active state.
To change any columns of this table, cmGwFiltersPortFilterRowStatus must be set to
'not-in-service' and then set back to 'active' in order to populate Port Filter entry
correctly with the latest Port Filter data."
::={ cmGwFiltersPortFilterEntry 6 }
--
-- Firewall information
--
cmGwFirewallObjects OBJECT IDENTIFIER ::= { cmGwFirewallMib 1 }
cmGwFirewallProtectEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) enables the IPV4 Firewall features.
Setting this object to false(2) disables the IPV4 Firewall features."
::= { cmGwFirewallObjects 1 }
cmGwFirewallIpFloodDetectEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) enables IP Flood detection. If enabled, the gateway
detects and blocks packet floods originating from both the LAN and WAN.
Setting this object to false(2) disables IP Flood detection."
::= { cmGwFirewallObjects 2 }
cmGwFirewallPortScanDetectEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) enables Port Scan detection. If enabled, the gateway
detects and blocks port scan activity originating from both the LAN and WAN.
Setting this object to false(2) disables Port Scan detection."
::= { cmGwFirewallObjects 3 }
cmGwFirewallBlockFragIpEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) prevents all fragmented IP packets from passing through
the firewall.
Setting this object to false(2) allows fragmented IP Packets to pass through the firewall.
Note: If Multicast is enabled, setting this object to True will not block Multicast fragments."
::= { cmGwFirewallObjects 4 }
cmGwFirewallProtectionLevel OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to select the firewall protection level
if cmGwFirewallProtectEnable is set to true.
Set on this object would fail if cmGwFirewallProtectEnable is false."
::= { cmGwFirewallObjects 5 }
cmGwIPv6FirewallProtectEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) enables the IPv6 Firewall.
Setting this object to false(2) disables the IPv6 Firewall."
::= { cmGwFirewallObjects 6 }
--
-- Gateway and eRouter Provisioning information
--
cmGwProvisioningObjects OBJECT IDENTIFIER ::= { cmGwProvisioningMib 1 }
cmGwProvDeviceProvisioningMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the method by which the Gateway is
provisioned. The default method is via TLV settings in the CM
configuration file. MSOs may use other alternate methods of configuring
Gateway parameters, such as downloading a separate XML configuration
file. This object may be used by the MSO (in the CM config file)
to select an alternate method of provisioning the Gateway.
A value of 0 selects the default provisioning mode. Other mode values are product
and customer-specific and will be provided in customer release notes."
REFERENCE
"SURFboard Cable Device FCI Enumerations Specification."
::= { cmGwProvisioningObjects 1 }
cmGwProvDeviceConfigStatus OBJECT-TYPE
SYNTAX INTEGER
{
notSpecified(1),
inProgress(2),
success(3),
errorServerUnavailable(4),
errorFileNotFound(5),
errorBadFile(6),
download(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For products that download a separate Gateway config file this object
is used to retrieve the configuration status of the Gateway. If set to
notSpecified(1), then the Gateway will not attempt to download the
Gateway config file. If set to download(7), the Gateway will restart the
Provisioning process and download the Gateway config file."
::= { cmGwProvisioningObjects 2 }
cmGwProvDeviceConfigFilename OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the location of the Gateway
configuration file."
::= { cmGwProvisioningObjects 3 }
cmGwProvErouterMode OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
ipv4(2),
ipv6(3),
dual(4),
ipv4RG(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Toggles IP Provisioning Modes for eRouter.
disabled(1) disables the eRouter and places the device in bridge mode.
ipv4(2) places the eRouter in IPv4Only mode. In this mode,
IPv4 traffic will be NAPT'd and IPv6 traffic will be dropped.
ipv6(3) places the eRouter in IPv6Only mode. In this mode, IPv6 traffic
will be forwarded and IPv4 traffic will be dropped.
dual(4) places the eRouter in dual stack mode. IPv4 traffic will be NAPT'd
and IPv6 traffic will be forwarded.
ipv4RG(5) places the device in ipv4 Legacy Gateway mode. IPv4 traffic will
be NAPT'd. IPv6 traffic will be dropped."
::= { cmGwProvisioningObjects 4 }
cmGwProvErouterIPv6PassthruMode OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
ipv6Only(1),
dualStack(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The value of this object controls the eRouter IPv6 passthrough feature
on product deployments that support it.
When the value of this object is set to disabled(0), eRouter provisioning
and CPE traffic handling will behave as specified in the eRouter
Specification. When the value of this object is set to ipv6Only(1),
the eRouter will not provision its WAN interface with an IP address
(no IPv4 address, no IPv6 address). It will drop all IPv4 CPE traffic,
and will bridge all IPv6 traffic. When the value of this object is
set to dualStack(2), the eRouter will provision its WAN interface with
only an IPv4 address (no provisioning of an IPv6 address). It will NAPT
IPv4 traffic and bridge IPv6 traffic.
NOTE: A change to the value of this object will cause an automatic reboot
of the device."
::= { cmGwProvisioningObjects 5 }
-- Conformance -------------------------------------------------------------
cmGwCompliances OBJECT IDENTIFIER ::= { cmGwConformance 1 }
cmGwGroups OBJECT IDENTIFIER ::= { cmGwConformance 2 }
-- Compliance statements
cmGwCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that implement Gateway MIB"
MODULE -- this module
MANDATORY-GROUPS { cmGwBaseGroup }
OBJECT cmGwLanAddrIpType
WRITE-SYNTAX INTEGER { ipv4(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only IPv4 address type is required to be supported. This can be
done by making this object read-only or only allowing the value
of ipv4 to be written."
OBJECT cmGwWanInetAddressType
WRITE-SYNTAX INTEGER { ipv4(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only IPv4 address type is required to be supported. This can be
done by making this object read-only or only allowing the value
of ipv4 to be written."
OBJECT cmGwWanSubnetMaskType
WRITE-SYNTAX INTEGER { ipv4(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only IPv4 address type is required to be supported. This can be
done by making this object read-only or only allowing the value
of ipv4 to be written."
OBJECT cmGwWanRouterType
WRITE-SYNTAX INTEGER { ipv4(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only IPv4 address type is required to be supported. This can be
done by making this object read-only or only allowing the value
of ipv4 to be written."
OBJECT cmGwWanAddrDnsIpType
WRITE-SYNTAX INTEGER { ipv4(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only IPv4 address type is required to be supported. This can be
done by making this object read-only or only allowing the value
of ipv4 to be written."
-- OBJECT cmGwLanPoolStartType
-- WRITE-SYNTAX INTEGER { ipv4(1) }
-- MIN-ACCESS read-only
-- DESCRIPTION
-- "Only IPv4 address type is required to be supported. This can be
-- done by making this object read-only or only allowing the value
-- of ipv4 to be written."
-- OBJECT cmGwDhcpServerSubnetMaskType
-- WRITE-SYNTAX INTEGER { ipv4(1) }
-- MIN-ACCESS read-only
-- DESCRIPTION
-- "Only IPv4 address type is required to be supported. This can be
-- done by making this object read-only or only allowing the value
-- of ipv4 to be written."
-- OBJECT cmGwDhcpServerDhcpAddressType
-- WRITE-SYNTAX INTEGER { ipv4(1) }
-- MIN-ACCESS read-only
-- DESCRIPTION
-- "Only IPv4 address type is required to be supported. This can be
-- done by making this object read-only or only allowing the value
-- of ipv4 to be written."
OBJECT cmGwVirtualServerLanAddrType
WRITE-SYNTAX INTEGER { ipv4(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only IPv4 address type is required to be supported. This can be
done by making this object read-only or only allowing the value
of ipv4 to be written."
OBJECT cmGwNatGamingDMZIpAddrType
WRITE-SYNTAX INTEGER { ipv4(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only IPv4 address type is required to be supported. This can be
done by making this object read-only or only allowing the value
of ipv4 to be written."
::= { cmGwCompliances 1 }
-- Units of compliance
cmGwBaseGroup OBJECT-GROUP
OBJECTS {
cmGwWanMacAddress,
cmGwWanSetToFactory,
cmGwWanDhcpcAdminStatus,
cmGwWanInetAddressType,
cmGwWanInetAddress,
cmGwWanHostName,
cmGwWanSubnetMaskType,
cmGwWanSubnetMask,
cmGwWanRouterType,
cmGwWanRouter,
--cmGwWanAddrDnsIpType,
--cmGwWanAddrDnsIp,
cmGwWanAddrDnsRowStatus,
cmGwLanDhcpsSetToFactory,
cmGwLanDhcpsAddressPoolStartType,
cmGwLanDhcpsAddressPoolStart,
cmGwLanDhcpsNetworkNumberType,
cmGwLanDhcpsNetworkNumber,
cmGwLanDhcpsSubnetMaskType,
cmGwLanDhcpsSubnetMask,
cmGwLanDhcpsDomainName,
cmGwLanDhcpsTTL,
cmGwLanDhcpsInterfaceMTU,
cmGwLanDhcpsLeaseTime,
cmGwLanDhcpsInetAddressType,
cmGwLanDhcpsInetAddress,
cmGwLanDhcpsMaxAddressCount,
cmGwLanDhcpsCurrentLeaseCount,
--cmGwLanAddrIpType,
--cmGwLanAddrIp,
cmGwLanAddrClientID,
cmGwLanAddrLeaseCreateTime,
cmGwLanAddrLeaseExpireTime,
cmGwLanAddrMethod,
cmGwLanAddrHostName,
cmGwLanAddrRowStatus,
cmGwNatSetToFactory,
cmGwNatTcpTimeWait,
cmGwNatUdpTimeWait,
cmGwNatIcmpTimeWait,
cmGwNatPrimaryMode,
cmGwNatGamingDMZIpAddrType,
cmGwNatGamingDMZIpAddr,
--cmGwNatMappingIndex,
cmGwNatMappingWanAddrType,
cmGwNatMappingWanAddr,
cmGwNatMappingWanPort,
cmGwNatMappingLanAddrType,
cmGwNatMappingLanAddr,
cmGwNatMappingLanPort,
cmGwNatMappingMethod,
cmGwNatMappingProtocol,
cmGwNatMappingRowStatus,
--cmGwNatPassthroughIndex,
cmGwNatPassthroughMACAddr,
cmGwNatPassthroughDMZEnable,
cmGwNatPassthroughRowStatus,
cmGwDevEvControl,
-- cmGwDevEvIndex,
cmGwDevEvFirstTime,
cmGwDevEvLastTime,
cmGwDevEvCounts,
cmGwDevEvLevel,
cmGwDevEvId,
cmGwDevEvText,
cmGwAlgSetToFactory,
cmGwAlgName,
cmGwAlgProtocol,
cmGwAlgPortFrom,
cmGwAlgPortTo,
cmGwAlgSessionChaining,
cmGwAlgSessionInterval,
cmGwAlgAddressReplacement,
cmGwAlgMultipleHostEnable,
cmGwAlgEnable,
cmGwAlgStatus,
cmGwVirtualServerSetToFactory,
-- cmGwVirtualServerIndex,
cmGwVirtualServerName,
cmGwVirtualServerType,
cmGwVirtualServerPort1,
cmGwVirtualServerPort2,
cmGwVirtualServerLanAddrType,
cmGwVirtualServerLanAddr,
cmGwVirtualServerEnable,
cmGwVirtualServerRowStatus
}
STATUS current
DESCRIPTION "A collection of objects for configuring gateway."
::= { cmGwGroups 1 }
END
View Git Blame Copy Permalink