370 lines
13 KiB
Plaintext
370 lines
13 KiB
Plaintext
CAPWAP-DOT11-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
RowStatus, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
MODULE-IDENTITY, OBJECT-TYPE, mib-2, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
ifIndex, InterfaceIndex
|
|
FROM IF-MIB
|
|
CapwapBaseMacTypeTC, CapwapBaseTunnelModeTC
|
|
FROM CAPWAP-BASE-MIB;
|
|
|
|
capwapDot11MIB MODULE-IDENTITY
|
|
LAST-UPDATED "201004300000Z" -- 30 April 2010
|
|
ORGANIZATION "IETF Control And Provisioning of Wireless Access
|
|
Points (CAPWAP) Working Group
|
|
http://www.ietf.org/html.charters/capwap-charter.html"
|
|
CONTACT-INFO
|
|
"General Discussion: capwap@frascone.com
|
|
To Subscribe: http://lists.frascone.com/mailman/listinfo/capwap
|
|
|
|
Yang Shi (editor)
|
|
Hangzhou H3C Tech. Co., Ltd.
|
|
Beijing R&D Center of H3C, Digital Technology Plaza
|
|
NO. 9 Shangdi 9th Street, Haidian District
|
|
Beijing 100085
|
|
China
|
|
Phone: +86 010 82775276
|
|
Email: rishyang@gmail.com
|
|
|
|
David T. Perkins (editor)
|
|
228 Bayview Dr.
|
|
San Carlos, CA 94070
|
|
USA
|
|
Phone: +1 408 394-8702
|
|
Email: dperkins@dsperkins.com
|
|
|
|
Chris Elliott (editor)
|
|
1516 Kent St.
|
|
Durham, NC 27707
|
|
USA
|
|
Phone: +1 919-308-1216
|
|
Email: chelliot@pobox.com
|
|
|
|
Yong Zhang (editor)
|
|
Fortinet, Inc.
|
|
1090 Kifer Road
|
|
Sunnyvale, CA 94086
|
|
USA
|
|
Email: yzhang@fortinet.com"
|
|
DESCRIPTION
|
|
"Copyright (c) 2010 IETF Trust and the persons identified as
|
|
authors of the code. All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or
|
|
without modification, is permitted pursuant to, and subject
|
|
to the license terms contained in, the Simplified BSD License
|
|
set forth in Section 4.c of the IETF Trust's Legal Provisions
|
|
Relating to IETF Documents
|
|
(http://trustee.ietf.org/license-info).
|
|
|
|
This version of this MIB module is part of RFC 5834;
|
|
see the RFC itself for full legal notices.
|
|
|
|
This MIB module contains managed object definitions for
|
|
CAPWAP Protocol binding for IEEE 802.11."
|
|
REVISION "201004300000Z"
|
|
DESCRIPTION
|
|
"Initial version, published as RFC 5834"
|
|
::= { mib-2 195 }
|
|
|
|
-- Textual conventions
|
|
|
|
CapwapDot11WlanIdTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique identifier of a Wireless Local Area
|
|
Network (WLAN)."
|
|
SYNTAX Unsigned32 (1..16)
|
|
|
|
CapwapDot11WlanIdProfileTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the unique identifier of a WLAN profile."
|
|
SYNTAX Unsigned32 (1..512)
|
|
|
|
-- Top level components of this MIB module
|
|
|
|
-- Tables, Scalars
|
|
|
|
capwapDot11Objects OBJECT IDENTIFIER
|
|
::= { capwapDot11MIB 1 }
|
|
-- Conformance
|
|
capwapDot11Conformance OBJECT IDENTIFIER
|
|
::= { capwapDot11MIB 2 }
|
|
|
|
-- capwapDot11WlanTable Table
|
|
|
|
capwapDot11WlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CapwapDot11WlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that allows the operator to display and configure
|
|
WLAN profiles, such as specifying the MAC type and tunnel mode
|
|
for a WLAN. Also, it helps the AC to configure a WLAN through
|
|
the IEEE 802.11 MIB module.
|
|
Values of all objects in this table are persistent at
|
|
restart/reboot."
|
|
::= { capwapDot11Objects 1 }
|
|
|
|
capwapDot11WlanEntry OBJECT-TYPE
|
|
SYNTAX CapwapDot11WlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that stores the settings of a WLAN profile."
|
|
INDEX { capwapDot11WlanProfileId }
|
|
::= { capwapDot11WlanTable 1 }
|
|
|
|
CapwapDot11WlanEntry ::=
|
|
SEQUENCE {
|
|
capwapDot11WlanProfileId CapwapDot11WlanIdProfileTC,
|
|
capwapDot11WlanProfileIfIndex InterfaceIndex,
|
|
capwapDot11WlanMacType CapwapBaseMacTypeTC,
|
|
capwapDot11WlanTunnelMode CapwapBaseTunnelModeTC,
|
|
capwapDot11WlanRowStatus RowStatus
|
|
}
|
|
|
|
capwapDot11WlanProfileId OBJECT-TYPE
|
|
SYNTAX CapwapDot11WlanIdProfileTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the identifier of a WLAN profile that has a
|
|
corresponding capwapDot11WlanProfileIfIndex."
|
|
::= { capwapDot11WlanEntry 1 }
|
|
|
|
capwapDot11WlanProfileIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the index value that uniquely identifies a
|
|
WLAN Profile Interface. The interface identified by a
|
|
particular value of this index is the same interface as
|
|
identified by the same value of the ifIndex.
|
|
The creation of a row object in the capwapDot11WlanTable
|
|
triggers the AC to automatically create an WLAN Profile
|
|
Interface identified by an ifIndex without manual
|
|
intervention.
|
|
Most MIB tables in the IEEE 802.11 MIB module
|
|
[IEEE.802-11.2007] use an ifIndex to identify an interface
|
|
to facilitate the configuration and maintenance, for example,
|
|
dot11AuthenticationAlgorithmsTable.
|
|
Using the ifIndex of a WLAN Profile Interface, the Operator
|
|
could configure a WLAN through the IEEE 802.11 MIB module."
|
|
::= { capwapDot11WlanEntry 2 }
|
|
|
|
capwapDot11WlanMacType OBJECT-TYPE
|
|
SYNTAX CapwapBaseMacTypeTC
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether the WTP SHOULD support the WLAN in
|
|
Local or Split MAC modes."
|
|
REFERENCE
|
|
"Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
|
|
RFC 5416."
|
|
::= { capwapDot11WlanEntry 3 }
|
|
|
|
capwapDot11WlanTunnelMode OBJECT-TYPE
|
|
SYNTAX CapwapBaseTunnelModeTC
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the frame tunneling mode to be used for IEEE 802.11
|
|
data frames from all stations associated with the WLAN.
|
|
Bits are exclusive with each other for a specific WLAN profile,
|
|
and only one tunnel mode could be configured.
|
|
If the operator set more than one bit, the value of the
|
|
Response-PDU's error-status field is set to 'wrongValue',
|
|
and the value of its error-index field is set to the index of
|
|
the failed variable binding."
|
|
REFERENCE
|
|
"Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
|
|
RFC 5416."
|
|
::= { capwapDot11WlanEntry 4 }
|
|
|
|
capwapDot11WlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'
|
|
The capwapDot11WlanRowStatus may be changed to 'active'
|
|
if all the managed objects in the conceptual row with
|
|
MAX-ACCESS read-create have been assigned valid values.
|
|
|
|
When the operator deletes a WLAN profile, the AC SHOULD
|
|
check whether the WLAN profile is bound with a radio.
|
|
If yes, the value of the Response-PDU's error-status field
|
|
is set to 'inconsistentValue', and the value of its
|
|
error-index field is set to the index of the failed variable
|
|
binding. If not, the row object could be deleted."
|
|
::= { capwapDot11WlanEntry 5 }
|
|
|
|
-- End of capwapDot11WlanTable Table
|
|
|
|
-- capwapDot11WlanBindTable Table
|
|
|
|
capwapDot11WlanBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CapwapDot11WlanBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that stores bindings between WLAN profiles
|
|
(identified by capwapDot11WlanProfileId) and WTP Virtual Radio
|
|
Interfaces. The WTP Virtual Radio Interfaces on the AC
|
|
correspond to physical layer (PHY) radios on the WTPs.
|
|
It also stores the mappings between WLAN IDs and WLAN
|
|
Basic Service Set (BSS) Interfaces.
|
|
Values of all objects in this table are persistent at
|
|
restart/reboot."
|
|
REFERENCE
|
|
"Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
|
|
RFC 5416."
|
|
::= { capwapDot11Objects 2 }
|
|
|
|
capwapDot11WlanBindEntry OBJECT-TYPE
|
|
SYNTAX CapwapDot11WlanBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that stores the binding of a WLAN profile
|
|
to a WTP Virtual Radio Interface. It also stores the mapping
|
|
between WLAN ID and WLAN BSS Interface.
|
|
The INDEX object ifIndex is the ifIndex of a WTP Virtual
|
|
Radio Interface."
|
|
INDEX { ifIndex, capwapDot11WlanProfileId }
|
|
::= { capwapDot11WlanBindTable 1 }
|
|
|
|
CapwapDot11WlanBindEntry ::=
|
|
SEQUENCE {
|
|
capwapDot11WlanBindWlanId CapwapDot11WlanIdTC,
|
|
capwapDot11WlanBindBssIfIndex InterfaceIndex,
|
|
capwapDot11WlanBindRowStatus RowStatus
|
|
}
|
|
|
|
capwapDot11WlanBindWlanId OBJECT-TYPE
|
|
SYNTAX CapwapDot11WlanIdTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the WLAN ID of a WLAN.
|
|
During a binding operation, the AC MUST select an unused
|
|
WLAN ID from between 1 and 16 [RFC5416]. For example, to bind
|
|
another WLAN profile to a radio that has been bound with
|
|
a WLAN profile, WLAN ID 2 should be assigned."
|
|
REFERENCE
|
|
"Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
|
|
RFC 5416."
|
|
::= { capwapDot11WlanBindEntry 1 }
|
|
|
|
capwapDot11WlanBindBssIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the index value that uniquely identifies a
|
|
WLAN BSS Interface. The interface identified by a
|
|
particular value of this index is the same interface as
|
|
identified by the same value of the ifIndex.
|
|
|
|
The ifIndex here is for a WLAN BSS Interface.
|
|
The creation of a row object in the capwapDot11WlanBindTable
|
|
triggers the AC to automatically create a WLAN BSS Interface
|
|
identified by an ifIndex without manual intervention.
|
|
The PHY address of the capwapDot11WlanBindBssIfIndex is the
|
|
BSSID. While manufacturers are free to assign BSSIDs by using
|
|
any arbitrary mechanism, it is advised that where possible the
|
|
BSSIDs are assigned as a contiguous block.
|
|
When assigned as a block, implementations can still assign
|
|
any of the available BSSIDs to any WLAN. One possible method
|
|
is for the WTP to assign the address using the following
|
|
algorithm: base BSSID address + WLAN ID."
|
|
REFERENCE
|
|
"Section 2.4 of CAPWAP Protocol Binding for IEEE 802.11,
|
|
RFC 5416."
|
|
::= { capwapDot11WlanBindEntry 2 }
|
|
|
|
capwapDot11WlanBindRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or delete a row
|
|
in this table.
|
|
All the objects in a row can be modified only when the value
|
|
of this object in the corresponding conceptual row is not
|
|
'active'. Thus, to modify one or more of the objects in
|
|
this conceptual row:
|
|
a. change the row status to 'notInService',
|
|
b. change the values of the row
|
|
c. change the row status to 'active'"
|
|
::= { capwapDot11WlanBindEntry 3 }
|
|
|
|
-- End of capwapDot11WlanBindTable Table
|
|
|
|
-- Module compliance
|
|
|
|
capwapDot11Groups OBJECT IDENTIFIER
|
|
::= { capwapDot11Conformance 1 }
|
|
|
|
capwapDot11Compliances OBJECT IDENTIFIER
|
|
::= { capwapDot11Conformance 2 }
|
|
|
|
capwapDot11Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the requirements for conformance to the
|
|
|
|
CAPWAP-DOT11-MIB module."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
capwapDot11WlanGroup,
|
|
capwapDot11WlanBindGroup
|
|
}
|
|
::= { capwapDot11Compliances 1 }
|
|
|
|
capwapDot11WlanGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
capwapDot11WlanProfileIfIndex,
|
|
capwapDot11WlanMacType,
|
|
capwapDot11WlanTunnelMode,
|
|
capwapDot11WlanRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that is used to configure
|
|
the properties of a WLAN profile."
|
|
::= { capwapDot11Groups 1 }
|
|
|
|
capwapDot11WlanBindGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
capwapDot11WlanBindWlanId,
|
|
capwapDot11WlanBindBssIfIndex,
|
|
capwapDot11WlanBindRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that is used to bind the
|
|
WLAN profiles with a radio."
|
|
::= { capwapDot11Groups 2 }
|
|
|
|
END
|