2062 lines
72 KiB
Plaintext
2062 lines
72 KiB
Plaintext
-- MibName=raisecomRemoteManagementLocal
|
|
-- =======================================================================
|
|
-- Version info
|
|
--
|
|
-- Version 0.1 Created 2006.9.11 by CHENJUNYONG
|
|
-- This version of MIB is created just for extoam remote management on local devices.
|
|
--
|
|
-- Copyright(c) 2003-2005 by RAISECOM TECH, Ltd.
|
|
-- =======================================================================
|
|
|
|
-- ===========================================================================
|
|
-- modify:
|
|
-- 01, 20070613, ly, add raisecomRemoteDeviceName£¬modify raisecomRemotePortType
|
|
-- =======================================================================
|
|
|
|
-- ===========================================================================
|
|
|
|
--
|
|
-- RAISECOM remote device management objects
|
|
--
|
|
|
|
RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE ,
|
|
Integer32,
|
|
IpAddress,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString,
|
|
RowStatus,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
EnableVar,
|
|
PortList
|
|
FROM SWITCH-TC
|
|
EntryStatus
|
|
FROM SWITCH-RMON-MIB -- rmonMib.mib
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
raisecomAgent
|
|
FROM RAISECOM-BASE-MIB;
|
|
|
|
raisecomRemoteManagementLocal MODULE-IDENTITY
|
|
LAST-UPDATED "200608170000Z"
|
|
ORGANIZATION "RAISECOM TECH, Ltd."
|
|
CONTACT-INFO "www.raisecom.com"
|
|
DESCRIPTION
|
|
"The MIB module defining objects for remote management on local devices."
|
|
::= { raisecomAgent 12}
|
|
|
|
RcRemoteVlanStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Specifies the status of vlan to be performed.
|
|
The value 'vlan-forbid' will forbid vlan function in the equipment.
|
|
The value 'vlan-dot1q' will allow 802.1Q vlan function to work in the equipment.
|
|
The value 'vlan-port' will allow port vlan function to work in the equipment.
|
|
"
|
|
REFERENCE
|
|
"raisecomRemoteManagementLocal"
|
|
SYNTAX INTEGER {
|
|
vlan-forbid (1),
|
|
vlan-dot1q (2),
|
|
vlan-port (3)
|
|
}
|
|
|
|
RcRemotePortTagStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Specifies the status of tag in the port.
|
|
The value 'untag' means there is no tags in the port.
|
|
The value 'tag' means there is a tag in the port.
|
|
"
|
|
REFERENCE
|
|
"raisecomRemoteManagementLocal"
|
|
SYNTAX INTEGER {
|
|
untag (1),
|
|
tag (2)
|
|
}
|
|
|
|
|
|
RcRemoteConfigFrameSendStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Specifies the status of send config packet to the remote device.
|
|
The value 'send' means the config packet should be sent to the remote device and not saved.
|
|
The value 'save' means the config packet is just saved as default file in local device.
|
|
The value 'sendandsave' means the config packet should be sent to the remote device also
|
|
saved as default file in local device.
|
|
The value 'waitting' means the config packet is sending or saving.
|
|
The value 'successful' means the config packet is sent or saved successfully.
|
|
The value 'failed' means the config packet is failed to send or save.
|
|
"
|
|
REFERENCE
|
|
"raisecomRemoteManagementLocal"
|
|
SYNTAX INTEGER {
|
|
send(1),
|
|
save(2),
|
|
sendandsave(3),
|
|
waitting(4),
|
|
successful(5),
|
|
failed(6)
|
|
}
|
|
|
|
RcRemoteSfpDdmMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Specifies the mode of SFP DDM.
|
|
The value 'unknown' means the remote SFP DDM mode is unknown.
|
|
The value 'inside' means the remote SFP DDM mode is inside.
|
|
The value 'outside' means the remote SFP DDM mode is outside.
|
|
"
|
|
REFERENCE
|
|
"raisecomRemoteManagementLocal"
|
|
SYNTAX INTEGER {
|
|
unknown (0),
|
|
inside (1),
|
|
outside (2)
|
|
}
|
|
|
|
RcRemoteSfpDdmAlarmStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Specifies the status of SFP DDM alarm.
|
|
The value 'normal' means the remote SFP DDM is normal.
|
|
The value 'low' means the remote SFP DDM is lower than threshold.
|
|
The value 'high' means the remote SFP DDM is higher than threshold.
|
|
"
|
|
REFERENCE
|
|
"raisecomRemoteManagementLocal"
|
|
SYNTAX INTEGER {
|
|
normal (0),
|
|
low (1),
|
|
high (2)
|
|
}
|
|
|
|
-- groups
|
|
|
|
raisecomRemoteManagementLocalMibObjects OBJECT IDENTIFIER ::= { raisecomRemoteManagementLocal 1 }
|
|
raisecomRemoteManagementLocalMibTraps OBJECT IDENTIFIER ::= { raisecomRemoteManagementLocal 2 }
|
|
|
|
|
|
--
|
|
raisecomRemoteTrapEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether traps should be generated
|
|
when receives OAM notifications from remote devices."
|
|
::= { raisecomRemoteManagementLocalMibObjects 1 }
|
|
|
|
|
|
raisecomRemoteInvariableInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteInvariableInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Basic information of remote devices."
|
|
::= { raisecomRemoteManagementLocalMibObjects 2 }
|
|
|
|
raisecomRemoteInvariableInfoEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteInvariableInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry for basic information of each remote device."
|
|
INDEX { raisecomRemoteInvariableInfoIndex }
|
|
::= { raisecomRemoteInvariableInfoTable 1 }
|
|
|
|
RaisecomRemoteInvariableInfoEntry ::= SEQUENCE {
|
|
raisecomRemoteInvariableInfoIndex INTEGER,
|
|
raisecomRemoteSysOid OBJECT IDENTIFIER,
|
|
raisecomRemoteModuleType INTEGER,
|
|
raisecomRemoteOidCapability TruthValue,
|
|
raisecomRemoteFileTransCapability TruthValue,
|
|
raisecomRemoteOtherCapability INTEGER,
|
|
raisecomRemoteMainChipId INTEGER,
|
|
raisecomRemoteFpgaChipId INTEGER,
|
|
raisecomRemoteFpgaSwVer OCTET STRING,
|
|
raisecomRemoteSystemSwVer OCTET STRING,
|
|
raisecomRemoteSystemHwVer OCTET STRING,
|
|
raisecomRemotePortNum INTEGER,
|
|
raisecomRemoteDeviceName OCTET STRING,
|
|
raisecomRemoteInvariableInfoStatus EntryStatus
|
|
}
|
|
|
|
raisecomRemoteInvariableInfoIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object which specifies a unique entry in the
|
|
raisecomRemoteTrapEnable."
|
|
::= { raisecomRemoteInvariableInfoEntry 1 }
|
|
|
|
raisecomRemoteSysOid OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor's authoritative identification of the network
|
|
management subsystem contained in the entity. This value
|
|
provides an easy and unambiguous means for determining `what
|
|
kind of box' the remote device is. "
|
|
DEFVAL { 0 }
|
|
::= { raisecomRemoteInvariableInfoEntry 2 }
|
|
|
|
raisecomRemoteModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies module type of remote device."
|
|
::= { raisecomRemoteInvariableInfoEntry 3 }
|
|
|
|
raisecomRemoteOidCapability OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether the device support OID parse."
|
|
DEFVAL {false}
|
|
::= { raisecomRemoteInvariableInfoEntry 4 }
|
|
|
|
raisecomRemoteFileTransCapability OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether the device support file transfer via oam."
|
|
DEFVAL {false}
|
|
::= { raisecomRemoteInvariableInfoEntry 5 }
|
|
|
|
raisecomRemoteOtherCapability OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies oam capbilities set supported by remote device.
|
|
The value of 2^n (n>=0&&n<32) stands for each oam capability. 2^0 stands
|
|
for IP configuration capability ,2^1 stands for SNMP community configuration
|
|
capability,2^2 stands for port configuration,2^3 stands for environment monitor
|
|
capability, 2^4 stands for reboot opration, 2^5 stands for write operation,
|
|
2^6 stands for erase remote configuration file capability, 2^7 stands for hostname
|
|
configuration, 2^8 stands for extend-oam notification enable capability.
|
|
Several 2^n ORed value stands for corresponding capabilities¡¯ combination.
|
|
For example,the value of 3 equal 2^0 OR 2^1,so value of 3 indicates remote device
|
|
supports IP configuration and SNMP community configuration capabilities concurrently ."
|
|
DEFVAL {0}
|
|
::= { raisecomRemoteInvariableInfoEntry 6 }
|
|
|
|
raisecomRemoteMainChipId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The main chip id of remote device, probably the id of switch chip
|
|
contained in remote device."
|
|
DEFVAL {0}
|
|
::= { raisecomRemoteInvariableInfoEntry 7 }
|
|
|
|
raisecomRemoteFpgaChipId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FPGA chip id of remote device."
|
|
DEFVAL {0}
|
|
::= { raisecomRemoteInvariableInfoEntry 8 }
|
|
|
|
raisecomRemoteFpgaSwVer OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FPGA software version of remote device."
|
|
::= { raisecomRemoteInvariableInfoEntry 9 }
|
|
|
|
raisecomRemoteSystemSwVer OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote devices system software version."
|
|
::= { raisecomRemoteInvariableInfoEntry 10 }
|
|
|
|
raisecomRemoteSystemHwVer OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote devices system hardware version."
|
|
::= { raisecomRemoteInvariableInfoEntry 11 }
|
|
|
|
raisecomRemotePortNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of remote device."
|
|
::= { raisecomRemoteInvariableInfoEntry 12 }
|
|
|
|
raisecomRemoteDeviceName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of remote device."
|
|
::= { raisecomRemoteInvariableInfoEntry 13 }
|
|
|
|
raisecomRemoteInvariableInfoStatus OBJECT-TYPE
|
|
SYNTAX EntryStatus
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this invariable information entry."
|
|
::= { raisecomRemoteInvariableInfoEntry 14 }
|
|
|
|
-- raisecomRemoteEnvironmentTable
|
|
|
|
raisecomRemoteEnvironmentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteEnvironmentEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Environment information of remote devices."
|
|
::= { raisecomRemoteManagementLocalMibObjects 3 }
|
|
|
|
raisecomRemoteEnvironmentEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteEnvironmentEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry for environment information of remote devices."
|
|
INDEX { raisecomRemoteEnvironmentIndex }
|
|
::= { raisecomRemoteEnvironmentTable 1 }
|
|
|
|
RaisecomRemoteEnvironmentEntry ::= SEQUENCE {
|
|
raisecomRemoteEnvironmentIndex INTEGER,
|
|
raisecomRemoteTemperature INTEGER,
|
|
raisecomRemoteVolt3300 INTEGER,
|
|
raisecomRemoteVolt2500 INTEGER,
|
|
raisecomRemoteVolt1800 INTEGER,
|
|
raisecomRemoteVolt1200 INTEGER,
|
|
raisecomRemoteVoltNormal INTEGER
|
|
}
|
|
|
|
raisecomRemoteEnvironmentIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object which specifies a unique entry in the
|
|
raisecomRemoteEnvironmentTable. "
|
|
::= { raisecomRemoteEnvironmentEntry 1 }
|
|
|
|
raisecomRemoteTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current environment temperature of remote device."
|
|
DEFVAL {65535}
|
|
::= { raisecomRemoteEnvironmentEntry 2 }
|
|
|
|
raisecomRemoteVolt3300 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current voltage value of 3.3v of remote device."
|
|
DEFVAL {65535}
|
|
::= { raisecomRemoteEnvironmentEntry 3 }
|
|
|
|
raisecomRemoteVolt2500 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current voltage value of 2.5v of remote device."
|
|
DEFVAL {65535}
|
|
::= { raisecomRemoteEnvironmentEntry 4 }
|
|
|
|
raisecomRemoteVolt1800 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current voltage value of 1.8v of remote device."
|
|
DEFVAL {65535}
|
|
::= { raisecomRemoteEnvironmentEntry 5 }
|
|
|
|
raisecomRemoteVolt1200 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current voltage value of 1.2v of remote device."
|
|
DEFVAL {65535}
|
|
::= { raisecomRemoteEnvironmentEntry 6 }
|
|
|
|
raisecomRemoteVoltNormal OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
normal(1),
|
|
high(2),
|
|
low(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether remote votage is in normal range or not."
|
|
::= { raisecomRemoteEnvironmentEntry 7 }
|
|
|
|
-- raisecomRemoteSysCfgTable
|
|
|
|
raisecomRemoteSysCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteSysCfgEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of remote device system config."
|
|
::= { raisecomRemoteManagementLocalMibObjects 4 }
|
|
|
|
raisecomRemoteSysCfgEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteSysCfgEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of remote device system config."
|
|
INDEX { raisecomRemoteSysCfgIndex }
|
|
::= { raisecomRemoteSysCfgTable 1 }
|
|
|
|
RaisecomRemoteSysCfgEntry ::= SEQUENCE {
|
|
raisecomRemoteSysCfgIndex INTEGER,
|
|
raisecomRemoteSysOperation INTEGER,
|
|
raisecomRemoteSysOperationState INTEGER,
|
|
raisecomRemoteHostName OCTET STRING (SIZE (1..32)),
|
|
raisecomRemoteOamNotificationEnable EnableVar,
|
|
raisecomRemoteMaxAllowedFrameLength INTEGER
|
|
}
|
|
|
|
raisecomRemoteSysCfgIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object which specifies a unique entry in the
|
|
raisecomRemoteSysCfgTable. "
|
|
::= { raisecomRemoteSysCfgEntry 1 }
|
|
|
|
raisecomRemoteSysOperation OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ready(1),
|
|
write(2),
|
|
erase(3),
|
|
reboot(4)}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies system command in remote device.Currently,support three
|
|
types command:reboot,write and erase.Reboot command is used to reset
|
|
remote device,write is used to save startup-config file in remote device,
|
|
and erase is used to erase startup-config file of remote device."
|
|
DEFVAL {ready}
|
|
::= { raisecomRemoteSysCfgEntry 2 }
|
|
|
|
raisecomRemoteSysOperationState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
running(2),
|
|
successful(3),
|
|
failed(4)}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the state of this system operation to remote device."
|
|
DEFVAL {ready}
|
|
::= { raisecomRemoteSysCfgEntry 3 }
|
|
|
|
raisecomRemoteHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..32))
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Host name of Remote device."
|
|
::= { raisecomRemoteSysCfgEntry 4 }
|
|
|
|
raisecomRemoteOamNotificationEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether or not remote device send OAM notificaton frames."
|
|
::= { raisecomRemoteSysCfgEntry 5 }
|
|
|
|
raisecomRemoteMaxAllowedFrameLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies max ethernet frame length of remote device."
|
|
::= { raisecomRemoteSysCfgEntry 6 }
|
|
|
|
-- raisecomRemoteCommunityTable
|
|
|
|
raisecomRemoteCommunityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteCommunityEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of SNMPv1/v2c community string of remote devices."
|
|
::= { raisecomRemoteManagementLocalMibObjects 5 }
|
|
|
|
raisecomRemoteCommunityEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteCommunityEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of community of remote devices."
|
|
INDEX { raisecomRemoteSysCfgIndex }
|
|
::= { raisecomRemoteCommunityTable 1 }
|
|
|
|
RaisecomRemoteCommunityEntry ::= SEQUENCE {
|
|
raisecomRemoteCommunityIndex INTEGER,
|
|
raisecomRemoteCommunityName OCTET STRING (SIZE (1..20)),
|
|
raisecomRemoteCommunityPermission INTEGER
|
|
}
|
|
|
|
raisecomRemoteCommunityIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object which specifies a unique entry in the
|
|
raisecomRemoteCommunityTable. "
|
|
::= { raisecomRemoteCommunityEntry 1 }
|
|
|
|
raisecomRemoteCommunityName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..20))
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv1/v2c community name string in remote device.
|
|
In remote device's community table,the index of this community
|
|
is 3,and the view for this community is 'internet'."
|
|
::= { raisecomRemoteCommunityEntry 2 }
|
|
|
|
raisecomRemoteCommunityPermission OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readOnly(1),
|
|
readWrite(2),
|
|
invalid(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of access allowed.
|
|
'readOnly(1)' allows GET operations (i.e., GET,
|
|
GET-NEXT, GET-BULK) and 'readWrite(2)' allows both
|
|
GET and SET operations."
|
|
DEFVAL {readOnly}
|
|
::= { raisecomRemoteCommunityEntry 3 }
|
|
|
|
-- raisecomRemoteL3Table
|
|
|
|
raisecomRemoteL3Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteL3Entry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of remote subnet parameters. "
|
|
::= { raisecomRemoteManagementLocalMibObjects 6 }
|
|
|
|
raisecomRemoteL3Entry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteL3Entry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of L3 subnet parameters of remote devices."
|
|
INDEX { raisecomRemoteL3Index }
|
|
::= { raisecomRemoteL3Table 1 }
|
|
|
|
RaisecomRemoteL3Entry ::= SEQUENCE {
|
|
raisecomRemoteL3Index INTEGER,
|
|
raisecomRemoteL3IpAddr IpAddress,
|
|
raisecomRemoteL3Mask IpAddress,
|
|
raisecomRemoteL3VidIface INTEGER (1..4094),
|
|
raisecomRemoteL3VidMemberPorts PortList,
|
|
raisecomRemoteL3VidUntaggedPorts PortList,
|
|
raisecomRemoteL3DefaultGateway IpAddress,
|
|
raisecomRemoteL3ObIpAddr IpAddress,
|
|
raisecomRemoteL3ObMask IpAddress
|
|
}
|
|
|
|
raisecomRemoteL3Index OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object which specifies a unique entry in the
|
|
raisecomRemoteL3Table. "
|
|
::= { raisecomRemoteL3Entry 1 }
|
|
|
|
raisecomRemoteL3IpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of remote device. This IP address
|
|
logically AND'ed with 'raisecomRemoteL3Mask' yields
|
|
the actual subnet value for this subnet.Set the object
|
|
as '0.0.0.0' means delete IP address of remote devices "
|
|
::= { raisecomRemoteL3Entry 2 }
|
|
|
|
raisecomRemoteL3Mask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask for this remote subnet. It contains 1's
|
|
in the bit positions for the net and subnet IDs and 0's in
|
|
the bit positions for host ID. The 1's must be contiguous,
|
|
starting with the left most bit."
|
|
::= { raisecomRemoteL3Entry 3 }
|
|
|
|
raisecomRemoteL3VidIface OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the actual VLAN ID (VID) from 1 to 4094.
|
|
It is actually the management vlan of remote device."
|
|
::= { raisecomRemoteL3Entry 4 }
|
|
|
|
raisecomRemoteL3VidMemberPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which are permanently assigned to the egress
|
|
list for this VLAN by management.Changes to a bit in this object
|
|
affect the per-port per-VLAN Registrar control for Registration
|
|
Fixed for the relevant GVRP state machine on each port. A port
|
|
may not be added in this set if it is already a member of the set
|
|
of ports in dot1qVlanForbiddenEgressPorts. The default value of
|
|
this object is a string of zeros of appropriate length, indicating
|
|
not fixed."
|
|
::= { raisecomRemoteL3Entry 5}
|
|
|
|
raisecomRemoteL3VidUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which should transmit egress packets for this VLAN
|
|
as untagged. The default value of this object for the default VLAN
|
|
(dot1qVlanIndex = 1) is a string of appropriate length including all
|
|
ports. There is no specified default for other VLANs. If a device agent
|
|
cannot support the set of ports being set then it will reject the set
|
|
operation with an error. An example might be if a manager attempts to set
|
|
more than one VLAN to be untagged on egress where the device does not support
|
|
this IEEE 802.1Q option."
|
|
::= { raisecomRemoteL3Entry 6 }
|
|
|
|
raisecomRemoteL3DefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"With this object to Set or get default gateway of remote devices."
|
|
::= { raisecomRemoteL3Entry 7 }
|
|
raisecomRemoteL3ObIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The out IP Address of remote device."
|
|
::= { raisecomRemoteL3Entry 8 }
|
|
raisecomRemoteL3ObMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask for this remote subnet."
|
|
::= { raisecomRemoteL3Entry 9 }
|
|
|
|
|
|
-- raisecomRemotePortTable
|
|
|
|
raisecomRemotePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemotePortEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of remote devices port properties. "
|
|
::= { raisecomRemoteManagementLocalMibObjects 7 }
|
|
|
|
raisecomRemotePortEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemotePortEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry for port control and status information in remote devices."
|
|
INDEX { raisecomRemoteIfindex, raisecomRemotePortIfindex}
|
|
::= { raisecomRemotePortTable 1 }
|
|
|
|
RaisecomRemotePortEntry ::= SEQUENCE {
|
|
raisecomRemoteIfindex INTEGER,
|
|
raisecomRemotePortIfindex INTEGER,
|
|
raisecomRemotePortType INTEGER,
|
|
raisecomRemotePortName OCTET STRING,
|
|
raisecomRemotePortAdminStatus TruthValue,
|
|
raisecomRemotePortOperStatus INTEGER,
|
|
raisecomRemotePortDuplexSpeedSet INTEGER,
|
|
raisecomRemotePortDuplexSpeedGet INTEGER,
|
|
raisecomRemotePortFlowControlEnable EnableVar,
|
|
raisecomRemotePortFlowControlStatus EnableVar,
|
|
raisecomRemotePortIngressRate INTEGER (0..1048576),
|
|
raisecomRemotePortEgressRate INTEGER (0..1048576),
|
|
raisecomRemotePortFaultPassEnable EnableVar,
|
|
raisecomRemotePortFaultPassPorts PortList,
|
|
raisecomRemotePortFaultPassStatus INTEGER,
|
|
raisecomRemotePortFaultReturnEnable INTEGER ,
|
|
raisecomRemotePortFaultReturnStatus INTEGER,
|
|
raisecomRemotePortSD INTEGER,
|
|
raisecomRemoteOptModuleType INTEGER,
|
|
raisecomRemotePortDescr OCTET STRING (SIZE (1..255))
|
|
}
|
|
|
|
raisecomRemoteIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value based 1 which identifies the unique interface of local device."
|
|
::= { raisecomRemotePortEntry 1 }
|
|
|
|
raisecomRemotePortIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value based 1 which identifies the unique interface of remote device."
|
|
::= { raisecomRemotePortEntry 2 }
|
|
|
|
raisecomRemotePortType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
inexistence(0),
|
|
fx-1000M(1),
|
|
tx-1000M(2),
|
|
fx-100M(3),
|
|
tx-100M(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port type in remote devices,same as slot type."
|
|
::= { raisecomRemotePortEntry 3 }
|
|
|
|
raisecomRemotePortName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port name of remote devices."
|
|
::= { raisecomRemotePortEntry 4 }
|
|
|
|
raisecomRemotePortAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the port on remote devices."
|
|
::= { raisecomRemotePortEntry 5 }
|
|
|
|
raisecomRemotePortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the interface in remote devices."
|
|
::= { raisecomRemotePortEntry 6 }
|
|
|
|
raisecomRemotePortDuplexSpeedSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autonegotiate(1),
|
|
half-10(2),
|
|
full-10(3),
|
|
half-100(4),
|
|
full-100(5),
|
|
half-1000(6),
|
|
full-1000(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired speed and duplex of the interface in remote devices."
|
|
::= { raisecomRemotePortEntry 7 }
|
|
|
|
raisecomRemotePortDuplexSpeedGet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
half-10(2),
|
|
full-10(3),
|
|
half-100(4),
|
|
full-100(5),
|
|
half-1000(6),
|
|
full-1000(7),
|
|
illegal(99)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual speed and duplex for this interface. If the interface
|
|
is not configured for an acceptable value, a value of illegal(99) is
|
|
returned. A value of unknown(1) is returned when the interface is down."
|
|
::= { raisecomRemotePortEntry 8 }
|
|
|
|
raisecomRemotePortFlowControlEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the flow control on the interface to enable(1) or disable(2)."
|
|
::= { raisecomRemotePortEntry 9 }
|
|
|
|
raisecomRemotePortFlowControlStatus OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual port flow control status of remote device."
|
|
::= { raisecomRemotePortEntry 10 }
|
|
|
|
raisecomRemotePortIngressRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1048576)
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value is the ingress rate( Kbps) of the port."
|
|
::= { raisecomRemotePortEntry 11 }
|
|
|
|
raisecomRemotePortEgressRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1048576)
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value is the egress rate( Kbps) of the port."
|
|
::= { raisecomRemotePortEntry 12 }
|
|
|
|
raisecomRemotePortFaultPassEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set fault pass to enable(1) or disable(2) on the port in remote device."
|
|
::= { raisecomRemotePortEntry 13 }
|
|
|
|
raisecomRemotePortFaultPassPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ports set which should be down when fault pass occurs.If
|
|
the value is 0,stands for fault pass function is disable on
|
|
this port,otherwise fault pass function is enable and the ports
|
|
set specifies which ports should be down when fault pass occurs."
|
|
::= { raisecomRemotePortEntry 14 }
|
|
|
|
raisecomRemotePortFaultPassStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
down (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port state changging result of fault pass. If normal(1), there is no
|
|
fault pass occurring. If down(2), the port is down because of fault
|
|
pass occurring."
|
|
::= { raisecomRemotePortEntry 15 }
|
|
|
|
raisecomRemotePortFaultReturnEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2),
|
|
unavailable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set fault return on the port in remote device to enable(1) or disable(2).
|
|
This value of TP is unavailable."
|
|
::= { raisecomRemotePortEntry 16 }
|
|
|
|
raisecomRemotePortFaultReturnStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
down (2),
|
|
unavailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port state changging result of fault return.If normal(1), there
|
|
is no fault return occurring.If down(2), the port is down result
|
|
of fault return occurring.This value of TP is unavailable."
|
|
::= { raisecomRemotePortEntry 17 }
|
|
|
|
raisecomRemotePortSD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
sd (2),
|
|
unavailable(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SD status. This value of TP is unavailable."
|
|
::= { raisecomRemotePortEntry 18 }
|
|
|
|
raisecomRemoteOptModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
optical-M(1),
|
|
optical-S1(2),
|
|
optical-S2(3),
|
|
optical-S3(4),
|
|
optical-SS13(5),
|
|
optical-SS15(6),
|
|
optical-SS23(7),
|
|
optical-SS25(8),
|
|
optical-SS35(9),
|
|
unknown(10)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Optical module type of remote device port."
|
|
::= { raisecomRemotePortEntry 19 }
|
|
|
|
raisecomRemotePortDescr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of a port in remote device."
|
|
::= { raisecomRemotePortEntry 20 }
|
|
|
|
|
|
-- raisecomRemotePortStatsTable
|
|
|
|
raisecomRemotePortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemotePortStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of remote devices port statistics."
|
|
::= { raisecomRemoteManagementLocalMibObjects 8 }
|
|
|
|
raisecomRemotePortStatsEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemotePortStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of remote devices port statistics."
|
|
INDEX { raisecomRemoteStatsIfindex, raisecomRemoteStatsPortIfindex}
|
|
::= { raisecomRemotePortStatsTable 1 }
|
|
|
|
RaisecomRemotePortStatsEntry ::= SEQUENCE {
|
|
raisecomRemoteStatsIfindex INTEGER,
|
|
raisecomRemoteStatsPortIfindex INTEGER,
|
|
raisecomRemotePortInOctets Counter64,
|
|
raisecomRemotePortInPkts Counter64,
|
|
raisecomRemotePortInUcastPkts Counter64,
|
|
raisecomRemotePortInMulticastPkts Counter64,
|
|
raisecomRemotePortInBroadcastPkts Counter64,
|
|
raisecomRemotePortOutOctets Counter64,
|
|
raisecomRemotePortOutPkts Counter64,
|
|
raisecomRemotePortOutUcastPkts Counter64,
|
|
raisecomRemotePortOutMulticastPkts Counter64,
|
|
raisecomRemotePortOutBroadcastPkts Counter64,
|
|
raisecomRemotePortErrorPkts Counter32,
|
|
raisecomRemotePortDropEvents Counter32,
|
|
raisecomRemotePortCRCAlignErrors Counter32,
|
|
raisecomRemotePortUndersizePkts Counter32 ,
|
|
raisecomRemotePortOversizePkts Counter32,
|
|
raisecomRemotePortFragments Counter32,
|
|
raisecomRemotePortJabbers Counter32,
|
|
raisecomRemotePortCollisions Counter32
|
|
}
|
|
|
|
raisecomRemoteStatsIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value based 1 which identifies the unique interface of local device."
|
|
::= { raisecomRemotePortStatsEntry 1 }
|
|
|
|
raisecomRemoteStatsPortIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value based 1 which identifies the unique interface of remote device."
|
|
::= { raisecomRemotePortStatsEntry 2 }
|
|
|
|
raisecomRemotePortInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the port."
|
|
::= { raisecomRemotePortStatsEntry 3 }
|
|
|
|
raisecomRemotePortInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received on the port.."
|
|
::= { raisecomRemotePortStatsEntry 4 }
|
|
|
|
raisecomRemotePortInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were not addressed to a multicast
|
|
or broadcast address at this sub-layer."
|
|
::= { raisecomRemotePortStatsEntry 5 }
|
|
|
|
raisecomRemotePortInMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a multicast
|
|
address at this sub-layer. For a MAC layer protocol, this
|
|
includes both Group and Functional addresses"
|
|
::= { raisecomRemotePortStatsEntry 6 }
|
|
|
|
raisecomRemotePortInBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a higher (sub-)layer,
|
|
which were addressed to a broadcast address at this sub-layer."
|
|
::= { raisecomRemotePortStatsEntry 7 }
|
|
|
|
raisecomRemotePortOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the port,
|
|
including framing characters."
|
|
::= { raisecomRemotePortStatsEntry 8 }
|
|
|
|
raisecomRemotePortOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets transmitted out of the port."
|
|
::= { raisecomRemotePortStatsEntry 9 }
|
|
|
|
raisecomRemotePortOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols requested be
|
|
transmitted, and which were not addressed to a multicast or broadcast
|
|
address at this sub-layer, including those that were discarded or not sent."
|
|
::= { raisecomRemotePortStatsEntry 10 }
|
|
|
|
raisecomRemotePortOutMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols requested be transmitted,
|
|
and which were addressed to a multicast address at this sub-layer, including those
|
|
that were discarded or not sent. For a MAC layer protocol, this includes both
|
|
Group and Functional addresses."
|
|
::= { raisecomRemotePortStatsEntry 11 }
|
|
|
|
raisecomRemotePortOutBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols requested be transmitted,
|
|
and which were addressed to a broadcast address at this sub-layer, including
|
|
those that were discarded or not sent. "
|
|
::= { raisecomRemotePortStatsEntry 12 }
|
|
|
|
raisecomRemotePortErrorPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bad packets received by a specific port of remote device."
|
|
::= { raisecomRemotePortStatsEntry 13 }
|
|
|
|
raisecomRemotePortDropEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of events in which packets were dropped by
|
|
the probe due to lack of resources. Note that this number is
|
|
not necessarily the number of packets dropped; it is just the
|
|
number of times this condition has been detected."
|
|
::= { raisecomRemotePortStatsEntry 14 }
|
|
|
|
raisecomRemotePortCRCAlignErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that had a length (excluding
|
|
framing bits, but including FCS octets) of between 64 and 1518 octets,
|
|
inclusive, but but had either a bad Frame Check Sequence (FCS) with
|
|
an integral number of octets (FCS Error) or a bad FCS with a
|
|
non-integral number of octets (Alignment Error)."
|
|
::= { raisecomRemotePortStatsEntry 15 }
|
|
|
|
raisecomRemotePortUndersizePkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that were less than 64 octets
|
|
long (excluding framing bits, but including FCS octets) and were
|
|
otherwise well formed."
|
|
::= { raisecomRemotePortStatsEntry 16 }
|
|
|
|
raisecomRemotePortOversizePkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that were longer than 1518
|
|
octets (excluding framing bits, but including FCS octets) and
|
|
were otherwise well formed."
|
|
::= { raisecomRemotePortStatsEntry 17 }
|
|
|
|
raisecomRemotePortFragments OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that were less than 64 octets
|
|
in length (excluding framing bits but including FCS octets) and had
|
|
either a bad Frame Check Sequence (FCS) with an integral number of
|
|
octets (FCS Error) or a bad FCS with a non-integral number of octets
|
|
(Alignment Error)."
|
|
::= { raisecomRemotePortStatsEntry 18 }
|
|
|
|
raisecomRemotePortJabbers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received that were longer than 1518
|
|
octets (excluding framing bits, but including FCS octets), and
|
|
had either a bad Frame Check Sequence (FCS) with an integral
|
|
number of octets (FCS Error) or a bad FCS with a on-integral
|
|
number of octets (Alignment Error)."
|
|
::= { raisecomRemotePortStatsEntry 19 }
|
|
|
|
raisecomRemotePortCollisions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The best estimate of the total number of collisions on
|
|
this Ethernet segment."
|
|
::= { raisecomRemotePortStatsEntry 20 }
|
|
|
|
-- raisecomRemoteSfpTable
|
|
|
|
raisecomRemoteSfpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteSfpEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of remote devices SFP information."
|
|
::= { raisecomRemoteManagementLocalMibObjects 9 }
|
|
|
|
raisecomRemoteSfpEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteSfpEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of remote devices SFP information table."
|
|
INDEX {ifIndex}
|
|
::= { raisecomRemoteSfpTable 1 }
|
|
|
|
RaisecomRemoteSfpEntry ::= SEQUENCE {
|
|
raisecomRemoteSfpInterfaceId INTEGER,
|
|
raisecomRemoteSfpExist INTEGER,
|
|
raisecomRemoteSfpMediaType INTEGER,
|
|
raisecomRemoteSfpRXLOS INTEGER,
|
|
raisecomRemoteSfpTXFault INTEGER,
|
|
raisecomRemoteSfpTXDisable INTEGER,
|
|
raisecomRemoteSfpModuleType INTEGER,
|
|
raisecomRemoteSfpOpticalInterface INTEGER,
|
|
raisecomRemoteSfpSpeedStatus INTEGER,
|
|
raisecomRemoteSfpTransportDistance INTEGER,
|
|
raisecomRemoteSfpWaveLength INTEGER,
|
|
raisecomRemoteSfpVendor OCTET STRING(SIZE (0..16)),
|
|
raisecomRemoteSfpProductType OCTET STRING(SIZE (0..16)),
|
|
raisecomRemoteSfpVersion OCTET STRING(SIZE (0..4)),
|
|
raisecomRemoteSfpSerialNumber OCTET STRING(SIZE (0..16))
|
|
}
|
|
|
|
raisecomRemoteSfpInterfaceId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object based 1 identifies the remote port ID of SFP module location."
|
|
::= { raisecomRemoteSfpEntry 1 }
|
|
|
|
raisecomRemoteSfpExist OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
exist(1),
|
|
notexist(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether remote SFP module exist."
|
|
::= { raisecomRemoteSfpEntry 2 }
|
|
|
|
raisecomRemoteSfpMediaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fibersingle(0),
|
|
fiber50um(1),
|
|
fiber625um(2),
|
|
copper(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the media type of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 3 }
|
|
|
|
raisecomRemoteSfpRXLOS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
alarm(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the RX status of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 4 }
|
|
|
|
raisecomRemoteSfpTXFault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
alarm(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the TX status of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 5 }
|
|
|
|
raisecomRemoteSfpTXDisable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disable or enable the TX of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 6 }
|
|
|
|
raisecomRemoteSfpModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
gbic(2),
|
|
sff(3),
|
|
sfp(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the remote SFP module type."
|
|
::= { raisecomRemoteSfpEntry 7 }
|
|
|
|
raisecomRemoteSfpOpticalInterface OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
sc(1),
|
|
lc(7),
|
|
rj45(34)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the optical interface type of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 8 }
|
|
|
|
raisecomRemoteSfpSpeedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
speed125M(1),
|
|
speed155M(2),
|
|
speed622M(6),
|
|
speed1250M(12),
|
|
speed2500M(25)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the speed of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 9 }
|
|
|
|
raisecomRemoteSfpTransportDistance OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the transport distance of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 10 }
|
|
|
|
raisecomRemoteSfpWaveLength OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the wave length of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 11 }
|
|
|
|
raisecomRemoteSfpVendor OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..16))
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the vendor name of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 12 }
|
|
|
|
raisecomRemoteSfpProductType OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..16))
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the product type of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 13 }
|
|
|
|
raisecomRemoteSfpVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..4))
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the version of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 14 }
|
|
|
|
raisecomRemoteSfpSerialNumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..16))
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the serial number of remote SFP module."
|
|
::= { raisecomRemoteSfpEntry 15 }
|
|
|
|
-- raisecomRemoteDtTable
|
|
|
|
raisecomRemoteDtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteDtEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of remote devices Q-in-Q."
|
|
::= { raisecomRemoteManagementLocalMibObjects 10 }
|
|
|
|
raisecomRemoteDtEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteDtEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of remote devices Q-in-Q table."
|
|
INDEX {ifIndex}
|
|
::= { raisecomRemoteDtTable 1 }
|
|
|
|
RaisecomRemoteDtEntry ::= SEQUENCE {
|
|
raisecomRemoteDtSwitchMode INTEGER,
|
|
raisecomRemoteDtOuterTpid INTEGER,
|
|
raisecomRemoteDtNativeVlan INTEGER,
|
|
raisecomRemoteDtAccessPort INTEGER
|
|
}
|
|
|
|
raisecomRemoteDtSwitchMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transparent(1),
|
|
dot1q-vlan(2),
|
|
double-tagged-vlan(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the switch mode of remote device."
|
|
::= { raisecomRemoteDtEntry 1 }
|
|
|
|
raisecomRemoteDtOuterTpid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the outer tpid of remote device."
|
|
::= { raisecomRemoteDtEntry 2 }
|
|
|
|
raisecomRemoteDtNativeVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1.. 4094)
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the native vlan ID of remote device.
|
|
On transparent mode, the native vlan is useless; on dot1q-vlan
|
|
mode, the ingress packets without tag of acess ports is tagged
|
|
with the native vlan ID; on double-tagged-vlan mode, all ingress
|
|
packets of acess ports is added a tag with the outer tpid and
|
|
the native vlan ID."
|
|
::= { raisecomRemoteDtEntry 3 }
|
|
|
|
raisecomRemoteDtAccessPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
line(1),
|
|
client(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies vlan acess port of remote device."
|
|
::= { raisecomRemoteDtEntry 4 }
|
|
|
|
-- raisecomRemoteSendConfTable
|
|
|
|
raisecomRemoteSendConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteSendConfEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table for send configuration to remote devices"
|
|
::= { raisecomRemoteManagementLocalMibObjects 11 }
|
|
|
|
raisecomRemoteSendConfEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteSendConfEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry for send cofiguration to remote devices."
|
|
INDEX { ifIndex }
|
|
::= { raisecomRemoteSendConfTable 1 }
|
|
|
|
RaisecomRemoteSendConfEntry ::= SEQUENCE {
|
|
raisecomRemoteSendConf INTEGER
|
|
}
|
|
|
|
raisecomRemoteSendConf OBJECT-TYPE
|
|
SYNTAX RcRemoteConfigFrameSendStatus
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to send config frame to remote device
|
|
and to save config frame local."
|
|
DEFVAL {successful}
|
|
::= { raisecomRemoteSendConfEntry 1 }
|
|
|
|
-- raisecomRemoteInLoopbackTable
|
|
|
|
raisecomRemoteInLoopbackTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteInLoopbackEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of remote devices inside loopback."
|
|
::= { raisecomRemoteManagementLocalMibObjects 12 }
|
|
|
|
raisecomRemoteInLoopbackEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteInLoopbackEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of remote devices inside loopback."
|
|
INDEX {ifIndex}
|
|
::= { raisecomRemoteInLoopbackTable 1 }
|
|
|
|
RaisecomRemoteInLoopbackEntry ::= SEQUENCE {
|
|
raisecomRemoteInLoopbackMacExchange INTEGER,
|
|
raisecomRemoteInLoopbackCrcRecalSet INTEGER,
|
|
raisecomRemoteInLoopbackCrcRecal INTEGER,
|
|
raisecomRemoteInLoopbackStatus INTEGER
|
|
}
|
|
|
|
raisecomRemoteInLoopbackMacExchange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
exchange(1),
|
|
noexchange(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether the remote device
|
|
exchange MAC address when loopbacking."
|
|
::= { raisecomRemoteInLoopbackEntry 1 }
|
|
|
|
raisecomRemoteInLoopbackCrcRecalSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
recalculate(1),
|
|
norecalculate(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to set whether the remote device
|
|
recalculate CRC when loopbacking. This object represents
|
|
the desired configuration when initiate remote inside loopback."
|
|
DEFVAL {norecalculate}
|
|
::= { raisecomRemoteInLoopbackEntry 2 }
|
|
|
|
raisecomRemoteInLoopbackCrcRecal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
recalculate(1),
|
|
norecalculate(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether the remote device recalculate CRC when loopbacking."
|
|
::= { raisecomRemoteInLoopbackEntry 3 }
|
|
|
|
raisecomRemoteInLoopbackStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noloopback(1),
|
|
initiatinginloopback(2),
|
|
inloopback(3),
|
|
outloopback(4),
|
|
terminatingInloopback(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By this object can initiate or terminate remote inside
|
|
loopback,also can get remote device loopback status."
|
|
::= { raisecomRemoteInLoopbackEntry 4 }
|
|
|
|
-- raisecomRemoteVctTable
|
|
|
|
raisecomRemoteVctTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteVctEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of remote devices VCT information."
|
|
::= { raisecomRemoteManagementLocalMibObjects 13 }
|
|
|
|
raisecomRemoteVctEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteVctEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of remote devices VCT table."
|
|
INDEX {ifIndex}
|
|
::= { raisecomRemoteVctTable 1 }
|
|
|
|
RaisecomRemoteVctEntry ::= SEQUENCE {
|
|
raisecomRemoteVctAttribute INTEGER,
|
|
raisecomRemoteVctStatus INTEGER,
|
|
raisecomRemoteVctLength INTEGER
|
|
}
|
|
|
|
raisecomRemoteVctAttribute OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unSupported(1),
|
|
neverIssued(2),
|
|
issued(3) ,
|
|
testing(4),
|
|
begin(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the VCT attribute of remote device."
|
|
::= { raisecomRemoteVctEntry 1 }
|
|
|
|
raisecomRemoteVctStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
open(2),
|
|
shorted(3),
|
|
error(4),
|
|
invalidation(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the VCT status of remote device."
|
|
::= { raisecomRemoteVctEntry 2 }
|
|
|
|
raisecomRemoteVctLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the VCT length of remote device."
|
|
::= { raisecomRemoteVctEntry 3 }
|
|
|
|
|
|
-- raisecomRemoteVlanConfigTable
|
|
|
|
raisecomRemoteVlanConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteVlanConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of remote devices vlan information."
|
|
::= { raisecomRemoteManagementLocalMibObjects 14 }
|
|
|
|
raisecomRemoteVlanConfigEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteVlanConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of remote devices vlan table."
|
|
INDEX {ifIndex}
|
|
::= { raisecomRemoteVlanConfigTable 1 }
|
|
|
|
RaisecomRemoteVlanConfigEntry ::= SEQUENCE {
|
|
raisecomRemoteVlanStatus RcRemoteVlanStatus,
|
|
raisecomRemoteCosStatus TruthValue,
|
|
raisecomRemoteFiberPortTagType RcRemotePortTagStatus,
|
|
raisecomRemoteFiberPortPriority Integer32 (0..7 ),
|
|
raisecomRemoteFiberPortPvid Integer32 (1..4094 ),
|
|
raisecomRemoteCablePortTagType RcRemotePortTagStatus,
|
|
raisecomRemoteCablePortPriority Integer32 (0..7 ),
|
|
raisecomRemoteCablePortPvid Integer32 (1..4094 ),
|
|
raisecomRemoteCpuPortTagType RcRemotePortTagStatus,
|
|
raisecomRemoteCpuPortPriority Integer32 (0..7 ),
|
|
raisecomRemoteCpuPortPvid Integer32 (1..4094 ),
|
|
raisecomRemoteSendVlanConf RcRemoteConfigFrameSendStatus
|
|
}
|
|
|
|
raisecomRemoteVlanStatus OBJECT-TYPE
|
|
SYNTAX RcRemoteVlanStatus
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the vlan status of remote device."
|
|
::= { raisecomRemoteVlanConfigEntry 1 }
|
|
|
|
raisecomRemoteCosStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the 802.1p COS status of remote device.
|
|
TRUE means cos is forbidden to be used.
|
|
FALSE means cos is allowed to be used"
|
|
::= { raisecomRemoteVlanConfigEntry 2 }
|
|
|
|
raisecomRemoteFiberPortTagType OBJECT-TYPE
|
|
SYNTAX RcRemotePortTagStatus
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the attribute of Fiber Ports' tag in remote device."
|
|
::= { raisecomRemoteVlanConfigEntry 3 }
|
|
|
|
raisecomRemoteFiberPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7 )
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the Priority of Fiber Ports' tag in remote device.
|
|
The default value is '0'"
|
|
::= { raisecomRemoteVlanConfigEntry 4 }
|
|
|
|
raisecomRemoteFiberPortPvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094 )
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the Pvid of Fiber Ports' tag in remote device.
|
|
The default value is '1'"
|
|
::= { raisecomRemoteVlanConfigEntry 5 }
|
|
|
|
raisecomRemoteCablePortTagType OBJECT-TYPE
|
|
SYNTAX RcRemotePortTagStatus
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the attribute of Cable Ports' tag in remote device."
|
|
::= { raisecomRemoteVlanConfigEntry 6 }
|
|
|
|
raisecomRemoteCablePortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7 )
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the Priority of Cable Ports' tag in remote device.
|
|
The default value is '0'"
|
|
::= { raisecomRemoteVlanConfigEntry 7 }
|
|
|
|
raisecomRemoteCablePortPvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094 )
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the Pvid of Cable Ports' tag in remote device.
|
|
The default value is '1'"
|
|
::= { raisecomRemoteVlanConfigEntry 8 }
|
|
|
|
raisecomRemoteCpuPortTagType OBJECT-TYPE
|
|
SYNTAX RcRemotePortTagStatus
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the attribute of Cpu Ports' tag in remote device."
|
|
::= { raisecomRemoteVlanConfigEntry 9 }
|
|
|
|
raisecomRemoteCpuPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7 )
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the Priority of Cpu Ports' tag in remote device.
|
|
The default value is '0'"
|
|
::= { raisecomRemoteVlanConfigEntry 10 }
|
|
|
|
raisecomRemoteCpuPortPvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094 )
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the Pvid of Cpu Ports' tag in remote device.
|
|
The default value is '1'"
|
|
::= { raisecomRemoteVlanConfigEntry 11 }
|
|
|
|
raisecomRemoteSendVlanConf OBJECT-TYPE
|
|
SYNTAX RcRemoteConfigFrameSendStatus
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to send vlan config frame to remote device
|
|
and to save the config frame local."
|
|
DEFVAL {successful}
|
|
::= { raisecomRemoteVlanConfigEntry 12 }
|
|
|
|
-- raisecomRemoteVlanGroupTable
|
|
|
|
raisecomRemoteVlanGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteVlanGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of remote devices vlan information."
|
|
::= { raisecomRemoteManagementLocalMibObjects 15 }
|
|
|
|
raisecomRemoteVlanGroupEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteVlanGroupEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of remote devices vlan group table."
|
|
INDEX {ifIndex,
|
|
raisecomRemoteVlanGroupIndex}
|
|
::= { raisecomRemoteVlanGroupTable 1 }
|
|
|
|
RaisecomRemoteVlanGroupEntry ::= SEQUENCE {
|
|
raisecomRemoteVlanGroupIndex Integer32 (0..15 ),
|
|
raisecomRemoteVlanId Integer32 (0..4094 ),
|
|
raisecomRemoteVlanMember Integer32 (0..7 )
|
|
}
|
|
|
|
raisecomRemoteVlanGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15 )
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the index of vlan group in remote device."
|
|
::= { raisecomRemoteVlanGroupEntry 1 }
|
|
|
|
raisecomRemoteVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094 )
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the vlan id of the specify vlan group.
|
|
The default vlan id of group is 1 and other group's default vlan id is 0 ."
|
|
::= { raisecomRemoteVlanGroupEntry 2 }
|
|
|
|
raisecomRemoteVlanMember OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the ports belong to the vlan group.
|
|
If the frist bit is '1' means fiber port belongs to the vlan group.
|
|
If the second bit is '1' means cable port belongs to the vlan group.
|
|
If the third bit is '1' means cpu port belongs to the vlan group.
|
|
The default value is '7' means all the ports mentioned above belong to the vlan group"
|
|
::= { raisecomRemoteVlanGroupEntry 3 }
|
|
|
|
-- raisecomRemoteSfpDdmTable
|
|
|
|
raisecomRemoteSfpDdmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RaisecomRemoteSfpDdmEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of remote devices digital detect management information."
|
|
::= { raisecomRemoteManagementLocalMibObjects 16 }
|
|
|
|
raisecomRemoteSfpDdmEntry OBJECT-TYPE
|
|
SYNTAX RaisecomRemoteSfpDdmEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entry of remote devices digital detect management table."
|
|
INDEX {ifIndex}
|
|
::= { raisecomRemoteSfpDdmTable 1 }
|
|
|
|
RaisecomRemoteSfpDdmEntry ::= SEQUENCE {
|
|
raisecomRemoteSfpDdmValid TruthValue,
|
|
raisecomRemoteSfpDdmMode RcRemoteSfpDdmMode,
|
|
raisecomRemoteSfpDdmTemperature INTEGER (-128000..127996),
|
|
raisecomRemoteSfpDdmSupplyVolt INTEGER (0..65500),
|
|
raisecomRemoteSfpDdmBiasCurrent INTEGER (0..65500),
|
|
raisecomRemoteSfpDdmOpticalTxPower INTEGER (0..65535),
|
|
raisecomRemoteSfpDdmOpticalRxPower INTEGER (0..65535),
|
|
raisecomRemoteSfpDdmAlarm TruthValue,
|
|
raisecomRemoteSfpDdmAlarmTemStatus RcRemoteSfpDdmAlarmStatus,
|
|
raisecomRemoteSfpDdmAlarmVoltStatus RcRemoteSfpDdmAlarmStatus,
|
|
raisecomRemoteSfpDdmAlarmCurrentStatus RcRemoteSfpDdmAlarmStatus,
|
|
raisecomRemoteSfpDdmAlarmTxPowerStatus RcRemoteSfpDdmAlarmStatus,
|
|
raisecomRemoteSfpDdmAlarmRxPowerStatus RcRemoteSfpDdmAlarmStatus
|
|
}
|
|
|
|
raisecomRemoteSfpDdmValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the SFM in remote device is valid."
|
|
::= { raisecomRemoteSfpDdmEntry 1 }
|
|
|
|
raisecomRemoteSfpDdmMode OBJECT-TYPE
|
|
SYNTAX RcRemoteSfpDdmMode
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the mode of SFP in remote device."
|
|
::= { raisecomRemoteSfpDdmEntry 2 }
|
|
|
|
raisecomRemoteSfpDdmTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER (-128000..127996)
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies temperature of SFP in remote device. A unit is a ¡æ(1/1000Celsius). "
|
|
::= { raisecomRemoteSfpDdmEntry 3 }
|
|
|
|
raisecomRemoteSfpDdmSupplyVolt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65500)
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the volt of SFP in remote device. A unit is 100uV."
|
|
::= { raisecomRemoteSfpDdmEntry 4 }
|
|
|
|
raisecomRemoteSfpDdmBiasCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65500)
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the bias current of SFP in remote device. A unit is 2uA."
|
|
::= { raisecomRemoteSfpDdmEntry 5 }
|
|
|
|
raisecomRemoteSfpDdmOpticalTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the optical transmit power of SFP in remote device. A unit is 0.1uW."
|
|
::= { raisecomRemoteSfpDdmEntry 6 }
|
|
|
|
raisecomRemoteSfpDdmOpticalRxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the optical receive power of SFP in remote device. A unit is 0.1uW."
|
|
::= { raisecomRemoteSfpDdmEntry 7 }
|
|
|
|
raisecomRemoteSfpDdmAlarm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the SFP alarm is occur."
|
|
::= { raisecomRemoteSfpDdmEntry 8 }
|
|
|
|
raisecomRemoteSfpDdmAlarmTemStatus OBJECT-TYPE
|
|
SYNTAX RcRemoteSfpDdmAlarmStatus
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the SFP alarm status of tempreture in remote device."
|
|
::= { raisecomRemoteSfpDdmEntry 9 }
|
|
|
|
raisecomRemoteSfpDdmAlarmVoltStatus OBJECT-TYPE
|
|
SYNTAX RcRemoteSfpDdmAlarmStatus
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the SFP alarm status of volt in remote device."
|
|
::= { raisecomRemoteSfpDdmEntry 10 }
|
|
|
|
raisecomRemoteSfpDdmAlarmCurrentStatus OBJECT-TYPE
|
|
SYNTAX RcRemoteSfpDdmAlarmStatus
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the SFP alarm status of current in remote device."
|
|
::= { raisecomRemoteSfpDdmEntry 11 }
|
|
|
|
raisecomRemoteSfpDdmAlarmTxPowerStatus OBJECT-TYPE
|
|
SYNTAX RcRemoteSfpDdmAlarmStatus
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the SFP alarm status of transmit power in remote device."
|
|
::= { raisecomRemoteSfpDdmEntry 12 }
|
|
|
|
raisecomRemoteSfpDdmAlarmRxPowerStatus OBJECT-TYPE
|
|
SYNTAX RcRemoteSfpDdmAlarmStatus
|
|
ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the SFP alarm status of receive power in remote device."
|
|
::= { raisecomRemoteSfpDdmEntry 13 }
|
|
|
|
-- raisecomRemoteManagementLocalMibTraps
|
|
raisecomRemotePortLinkUp NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex, raisecomRemotePortIfindex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that link up events occurs on specific
|
|
ports of remote devices by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 1 }
|
|
|
|
raisecomRemotePortLinkDown NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex, raisecomRemotePortIfindex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that link down events occurs on specific
|
|
ports of remote devices by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 2 }
|
|
|
|
raisecomRemoteSfpDdmTemNormal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the temperature of remote
|
|
devices is normal by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 3 }
|
|
|
|
raisecomRemoteSfpDdmTemAbnormal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the temperature of remote
|
|
devices is abnormal(low or high) by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 4 }
|
|
|
|
raisecomRemoteSfpDdmVoltNormal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the volt of remote
|
|
devices is normal by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 5 }
|
|
|
|
raisecomRemoteSfpDdmVoltAbnormal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the volt of remote
|
|
devices is abnormal(low or high) by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 6 }
|
|
|
|
raisecomRemoteSfpDdmCurrentNormal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the bias current of remote
|
|
devices is normal by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 7 }
|
|
|
|
raisecomRemoteSfpDdmCurrentAbnormal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the bias current of remote
|
|
devices is abnormal(low or high) by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 8 }
|
|
|
|
raisecomRemoteSfpDdmTxPowerNomal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the optical transmit power of remote
|
|
devices is normal by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 9 }
|
|
|
|
raisecomRemoteSfpDdmTxPowerAbnormal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the optical transmit power of remote
|
|
devices is abnormal(low or high) by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 10 }
|
|
|
|
raisecomRemoteSfpDdmRxPowerNormal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the optical recieve power of remote
|
|
devices is normal by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 11 }
|
|
|
|
raisecomRemoteSfpDdmRxPowerAbnormal NOTIFICATION-TYPE
|
|
OBJECTS {ifIndex}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify snmp manager that the optical recieve power of remote
|
|
devices is abnormal(low or high) by send this trap."
|
|
::= { raisecomRemoteManagementLocalMibTraps 12 }
|
|
|
|
END
|