17808 lines
485 KiB
Plaintext
17808 lines
485 KiB
Plaintext
-- COPYRIGHT NOTICE
|
|
-- Copyright (c) Radware Ltd. 2009
|
|
-- All rights reserved
|
|
|
|
ALTEON-CHEETAH-NETWORK-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, Counter64,
|
|
IpAddress, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, PhysAddress
|
|
FROM SNMPv2-TC
|
|
aws-switch
|
|
FROM ALTEON-ROOT-MIB;
|
|
|
|
layer3 MODULE-IDENTITY
|
|
LAST-UPDATED "200908050000Z" -- 5 August, 2009
|
|
ORGANIZATION "Radware Ltd."
|
|
CONTACT-INFO "Lobby 1 (Visitors) and Lobby 2 (Deliveries)
|
|
575 Corporate Drive
|
|
Mahwah, NJ 07430
|
|
support@radware.com"
|
|
DESCRIPTION
|
|
"The MIB module for the Alteon OS Layer 3 configuration, statistics
|
|
and information ."
|
|
REVISION "200908050000Z" -- 5 August, 2009
|
|
DESCRIPTION
|
|
"Added revision clause for SMIv2 compliance."
|
|
::= { aws-switch 3 }
|
|
layer3Configs OBJECT IDENTIFIER ::= { layer3 1 }
|
|
layer3Stats OBJECT IDENTIFIER ::= { layer3 2 }
|
|
layer3Info OBJECT IDENTIFIER ::= { layer3 3 }
|
|
layer3Oper OBJECT IDENTIFIER ::= { layer3 4 }
|
|
|
|
ipInterfaceCfg OBJECT IDENTIFIER ::= { layer3Configs 1 }
|
|
ipGatewayCfg OBJECT IDENTIFIER ::= { layer3Configs 2 }
|
|
ipStaticRouteCfg OBJECT IDENTIFIER ::= { layer3Configs 3 }
|
|
ipForwardCfg OBJECT IDENTIFIER ::= { layer3Configs 4 }
|
|
ripCfg OBJECT IDENTIFIER ::= { layer3Configs 5 }
|
|
vrrpCfg OBJECT IDENTIFIER ::= { layer3Configs 6 }
|
|
arpCfg OBJECT IDENTIFIER ::= { layer3Configs 7 }
|
|
ipBootpCfg OBJECT IDENTIFIER ::= { layer3Configs 8 }
|
|
dnsCfg OBJECT IDENTIFIER ::= { layer3Configs 9 }
|
|
ipNwfCfg OBJECT IDENTIFIER ::= { layer3Configs 10 }
|
|
ipRmapCfg OBJECT IDENTIFIER ::= { layer3Configs 11 }
|
|
bgpCfg OBJECT IDENTIFIER ::= { layer3Configs 12 }
|
|
ospfCfg OBJECT IDENTIFIER ::= { layer3Configs 13 }
|
|
ipGeneralCfg OBJECT IDENTIFIER ::= { layer3Configs 14 }
|
|
ipStaticArpCfg OBJECT IDENTIFIER ::= { layer3Configs 15 }
|
|
rip2Cfg OBJECT IDENTIFIER ::= { layer3Configs 18 }
|
|
ospfv3Cfg OBJECT IDENTIFIER ::= { layer3Configs 20 }
|
|
haCfg OBJECT IDENTIFIER ::= { layer3Configs 21 }
|
|
ipv6StaticNbrCfg OBJECT IDENTIFIER ::= { layer3Configs 22 }
|
|
bfdCfg OBJECT IDENTIFIER ::= { layer3Configs 23 }
|
|
ipTunnelCfg OBJECT IDENTIFIER ::= { layer3Configs 24 }
|
|
|
|
ripStats OBJECT IDENTIFIER ::= { layer3Stats 1 }
|
|
arpStats OBJECT IDENTIFIER ::= { layer3Stats 2 }
|
|
routeStats OBJECT IDENTIFIER ::= { layer3Stats 3 }
|
|
dnsStats OBJECT IDENTIFIER ::= { layer3Stats 4 }
|
|
vrrpStats OBJECT IDENTIFIER ::= { layer3Stats 5 }
|
|
ospfStats OBJECT IDENTIFIER ::= { layer3Stats 6 }
|
|
clearStats OBJECT IDENTIFIER ::= { layer3Stats 7 }
|
|
ip6Stats OBJECT IDENTIFIER ::= { layer3Stats 10}
|
|
icmp6Stats OBJECT IDENTIFIER ::= { layer3Stats 11}
|
|
ip6gwStats OBJECT IDENTIFIER ::= { layer3Stats 12}
|
|
rip2Stats OBJECT IDENTIFIER ::= { layer3Stats 13 }
|
|
tcpStats OBJECT IDENTIFIER ::= { layer3Stats 14 }
|
|
ospfv3Stats OBJECT IDENTIFIER ::= { layer3Stats 15 }
|
|
vrrp6Stats OBJECT IDENTIFIER ::= { layer3Stats 16 }
|
|
ipTunnelStats OBJECT IDENTIFIER ::= { layer3Stats 17 }
|
|
|
|
ipRoutingInfo OBJECT IDENTIFIER ::= { layer3Info 1 }
|
|
arpInfo OBJECT IDENTIFIER ::= { layer3Info 2 }
|
|
vrrpInfo OBJECT IDENTIFIER ::= { layer3Info 3 }
|
|
ospfinfo OBJECT IDENTIFIER ::= { layer3Info 4 }
|
|
|
|
ospfv3info OBJECT IDENTIFIER ::= { layer3Info 13 }
|
|
|
|
haInfo OBJECT IDENTIFIER ::= { layer3Info 14 }
|
|
|
|
gatewayInfo OBJECT IDENTIFIER ::= { layer3Info 5 }
|
|
nbrcacheInfo OBJECT IDENTIFIER ::= { layer3Info 7 }
|
|
ipRoute6Info OBJECT IDENTIFIER ::= { layer3Info 8 }
|
|
ipIntfInfo OBJECT IDENTIFIER ::= { layer3Info 9 }
|
|
rip2Info OBJECT IDENTIFIER ::= { layer3Info 10 }
|
|
|
|
rip2RoutesInfo OBJECT IDENTIFIER ::= { layer3Info 11 }
|
|
allowedNwInfo OBJECT IDENTIFIER ::= { layer3Info 12 }
|
|
vrrpOper OBJECT IDENTIFIER ::= { layer3Oper 1 }
|
|
|
|
ipOper OBJECT IDENTIFIER ::= { layer3Oper 2 }
|
|
|
|
haOper OBJECT IDENTIFIER ::= { layer3Oper 3 }
|
|
|
|
-- IP Configuration
|
|
|
|
ipInterfaceTableMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the IP interface table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipInterfaceCfg 1 }
|
|
|
|
ipCurCfgIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpCurCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP interface configuration.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipInterfaceCfg 2 }
|
|
|
|
ipCurCfgIntfEntry OBJECT-TYPE
|
|
SYNTAX IpCurCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Ip interface table,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipCurCfgIntfIndex }
|
|
::= { ipCurCfgIntfTable 1 }
|
|
|
|
IpCurCfgIntfEntry ::= SEQUENCE {
|
|
ipCurCfgIntfIndex Integer32,
|
|
ipCurCfgIntfAddr IpAddress,
|
|
ipCurCfgIntfMask IpAddress,
|
|
ipCurCfgIntfBroadcast IpAddress,
|
|
ipCurCfgIntfState INTEGER,
|
|
ipCurCfgIntfBootpRelay INTEGER,
|
|
ipCurCfgIntfIpVer INTEGER,
|
|
ipCurCfgIntfIpv6Addr DisplayString,
|
|
ipCurCfgIntfPrefixLen INTEGER,
|
|
ipCurCfgIntfRouteAdv INTEGER,
|
|
ipCurCfgIntfVlan Integer32,
|
|
ipCurCfgIntfPeer DisplayString,
|
|
ipCurCfgIntfDescription DisplayString,
|
|
ipCurCfgIntfBfd INTEGER
|
|
}
|
|
|
|
ipCurCfgIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface number for which the IP information is related."
|
|
::= { ipCurCfgIntfEntry 1}
|
|
|
|
ipCurCfgIntfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the interface."
|
|
::= { ipCurCfgIntfEntry 2 }
|
|
|
|
ipCurCfgIntfMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of the interface."
|
|
::= { ipCurCfgIntfEntry 3 }
|
|
|
|
ipCurCfgIntfBroadcast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The broadcast address of the interface."
|
|
::= { ipCurCfgIntfEntry 4 }
|
|
|
|
ipCurCfgIntfVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN associated with the interface."
|
|
::= { ipCurCfgIntfEntry 5 }
|
|
|
|
ipCurCfgIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the interface."
|
|
::= { ipCurCfgIntfEntry 6 }
|
|
|
|
ipCurCfgIntfBootpRelay OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable BOOTP relay."
|
|
::= { ipCurCfgIntfEntry 7 }
|
|
|
|
|
|
ipCurCfgIntfIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address."
|
|
::= { ipCurCfgIntfEntry 9 }
|
|
|
|
ipCurCfgIntfIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the interface. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipCurCfgIntfEntry 10 }
|
|
|
|
ipCurCfgIntfPrefixLen OBJECT-TYPE
|
|
SYNTAX INTEGER(1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix length associated with this IP address ."
|
|
::= { ipCurCfgIntfEntry 11 }
|
|
|
|
ipCurCfgIntfRouteAdv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable route advertisement of the interface."
|
|
::= { ipCurCfgIntfEntry 12 }
|
|
|
|
|
|
ipCurCfgIntfPeer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Peer IP of the interface."
|
|
::= { ipCurCfgIntfEntry 13 }
|
|
|
|
ipCurCfgIntfDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Description of the interface."
|
|
::= { ipCurCfgIntfEntry 14 }
|
|
|
|
ipCurCfgIntfBfd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current BFD on/off configuration on the interface."
|
|
::= { ipCurCfgIntfEntry 15 }
|
|
|
|
ipNewCfgIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNewCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of interface configuration in the New Configuration Block.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipInterfaceCfg 3 }
|
|
|
|
ipNewCfgIntfEntry OBJECT-TYPE
|
|
SYNTAX IpNewCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Ip interface table,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipNewCfgIntfIndex }
|
|
::= { ipNewCfgIntfTable 1 }
|
|
|
|
IpNewCfgIntfEntry ::= SEQUENCE {
|
|
ipNewCfgIntfIndex Integer32,
|
|
ipNewCfgIntfAddr IpAddress,
|
|
ipNewCfgIntfMask IpAddress,
|
|
ipNewCfgIntfBroadcast IpAddress,
|
|
ipNewCfgIntfVlan Integer32,
|
|
ipNewCfgIntfState INTEGER,
|
|
ipNewCfgIntfBootpRelay INTEGER,
|
|
ipNewCfgIntfIpVer INTEGER,
|
|
ipNewCfgIntfIpv6Addr DisplayString,
|
|
ipNewCfgIntfPrefixLen INTEGER,
|
|
ipNewCfgIntfRouteAdv INTEGER,
|
|
ipNewCfgIntfDelete INTEGER,
|
|
ipNewCfgIntfPeer DisplayString,
|
|
ipNewCfgIntfDescription DisplayString
|
|
}
|
|
|
|
ipNewCfgIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface number for which the IP information is related."
|
|
::= { ipNewCfgIntfEntry 1 }
|
|
|
|
ipNewCfgIntfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the interface."
|
|
::= { ipNewCfgIntfEntry 2 }
|
|
|
|
ipNewCfgIntfMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of the interface."
|
|
::= { ipNewCfgIntfEntry 3 }
|
|
|
|
ipNewCfgIntfBroadcast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The broadcast address of the interface."
|
|
::= { ipNewCfgIntfEntry 4 }
|
|
|
|
ipNewCfgIntfVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN associated with the interface."
|
|
::= { ipNewCfgIntfEntry 5 }
|
|
|
|
ipNewCfgIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the interface."
|
|
::= { ipNewCfgIntfEntry 6 }
|
|
|
|
ipNewCfgIntfDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ipNewCfgIntfEntry 7 }
|
|
|
|
ipNewCfgIntfBootpRelay OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable BOOTP relay."
|
|
::= { ipNewCfgIntfEntry 8 }
|
|
|
|
ipNewCfgIntfIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address."
|
|
::= { ipNewCfgIntfEntry 10 }
|
|
|
|
ipNewCfgIntfIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the interface. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipNewCfgIntfEntry 11 }
|
|
|
|
ipNewCfgIntfPrefixLen OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix length associated with this IP address ."
|
|
::= { ipNewCfgIntfEntry 12 }
|
|
|
|
ipNewCfgIntfRouteAdv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable route advertisement of the interface."
|
|
::= { ipNewCfgIntfEntry 13 }
|
|
|
|
|
|
ipNewCfgIntfPeer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Peer IP of the interface."
|
|
::= { ipNewCfgIntfEntry 14 }
|
|
|
|
ipNewCfgIntfDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..50))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Description of the interface."
|
|
::= { ipNewCfgIntfEntry 15 }
|
|
|
|
ipCurLanIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Holds the LAN interface ID,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipInterfaceCfg 4 }
|
|
|
|
ipNewLanIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Holds the LAN interface ID,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipInterfaceCfg 5 }
|
|
|
|
-- IP Gateway Table Configuration
|
|
|
|
ipCurCfgGwMetric OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
strict(1),
|
|
roundrobin(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default gateway metric.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipGatewayCfg 1 }
|
|
|
|
ipNewCfgGwMetric OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
strict(1),
|
|
roundrobin(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default gateway metric.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipGatewayCfg 2 }
|
|
|
|
ipGatewayTableMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the IP gateway table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipGatewayCfg 3 }
|
|
|
|
ipCurCfgGwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpCurCfgGwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of gateways in the Current configuration Block.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipGatewayCfg 4 }
|
|
|
|
ipCurCfgGwEntry OBJECT-TYPE
|
|
SYNTAX IpCurCfgGwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Ip gateway table"
|
|
INDEX { ipCurCfgGwIndex }
|
|
::= { ipCurCfgGwTable 1 }
|
|
|
|
IpCurCfgGwEntry ::= SEQUENCE {
|
|
ipCurCfgGwIndex Integer32,
|
|
ipCurCfgGwAddr IpAddress,
|
|
ipCurCfgGwInterval INTEGER,
|
|
ipCurCfgGwRetry INTEGER,
|
|
ipCurCfgGwArp INTEGER,
|
|
ipCurCfgGwVlan Integer32,
|
|
ipCurCfgGwIpVer INTEGER,
|
|
ipCurCfgGwIpv6Addr DisplayString,
|
|
ipCurCfgGwPriority INTEGER,
|
|
ipCurCfgGwState INTEGER
|
|
}
|
|
|
|
ipCurCfgGwIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway number for which the information is related."
|
|
::= { ipCurCfgGwEntry 1}
|
|
|
|
ipCurCfgGwAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the default gateway."
|
|
::= { ipCurCfgGwEntry 2 }
|
|
|
|
ipCurCfgGwInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval between ping attempts."
|
|
::= { ipCurCfgGwEntry 3 }
|
|
|
|
ipCurCfgGwRetry OBJECT-TYPE
|
|
SYNTAX INTEGER (1..120)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of failed attempts to declare the default gateway DOWN."
|
|
::= { ipCurCfgGwEntry 4 }
|
|
|
|
ipCurCfgGwState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the default gateway."
|
|
::= { ipCurCfgGwEntry 5 }
|
|
|
|
ipCurCfgGwArp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of ARP/Neighbor Discovery health check."
|
|
::= { ipCurCfgGwEntry 6 }
|
|
|
|
ipCurCfgGwVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN number for this gateway. The first 4 entries in the table
|
|
are only used for default gateway load balancing hence the VLAN
|
|
cannot be specified for the first 4 entries."
|
|
::= { ipCurCfgGwEntry 7 }
|
|
|
|
ipCurCfgGwPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
high(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of the default route for this gateway. High priority
|
|
means that the default gateway route will have higher priority
|
|
over learned default routes. Low priority means that the default
|
|
gateway route will have lower priority than learned default
|
|
routes."
|
|
::= { ipCurCfgGwEntry 8 }
|
|
|
|
ipCurCfgGwIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address."
|
|
::= { ipCurCfgGwEntry 9 }
|
|
|
|
ipCurCfgGwIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the gateway. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipCurCfgGwEntry 10 }
|
|
|
|
|
|
ipNewCfgGwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNewCfgGwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of gateway configuration in the new configuration block.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipGatewayCfg 5 }
|
|
|
|
ipNewCfgGwEntry OBJECT-TYPE
|
|
SYNTAX IpNewCfgGwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the Ip default gateway table,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipNewCfgGwIndex }
|
|
::= { ipNewCfgGwTable 1 }
|
|
|
|
IpNewCfgGwEntry ::= SEQUENCE {
|
|
ipNewCfgGwIndex Integer32,
|
|
ipNewCfgGwAddr IpAddress,
|
|
ipNewCfgGwInterval INTEGER,
|
|
ipNewCfgGwRetry INTEGER,
|
|
ipNewCfgGwState INTEGER,
|
|
ipNewCfgGwArp INTEGER,
|
|
ipNewCfgGwVlan Integer32,
|
|
ipNewCfgGwIpVer INTEGER,
|
|
ipNewCfgGwIpv6Addr DisplayString,
|
|
ipNewCfgGwPriority INTEGER,
|
|
ipNewCfgGwDelete INTEGER
|
|
}
|
|
|
|
ipNewCfgGwIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway number for which the information is related."
|
|
::= { ipNewCfgGwEntry 1}
|
|
|
|
ipNewCfgGwAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the default gateway."
|
|
::= { ipNewCfgGwEntry 2 }
|
|
|
|
ipNewCfgGwInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval in seconds between ping attempts."
|
|
::= { ipNewCfgGwEntry 3 }
|
|
|
|
ipNewCfgGwRetry OBJECT-TYPE
|
|
SYNTAX INTEGER (1..120)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of failed attempts to declare the default gateway DOWN."
|
|
::= { ipNewCfgGwEntry 4 }
|
|
|
|
ipNewCfgGwState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the default gateway."
|
|
::= { ipNewCfgGwEntry 5 }
|
|
|
|
ipNewCfgGwDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other is returned. Setting the value to anything other
|
|
than 2(delete) has no effect on the state of the row."
|
|
::= { ipNewCfgGwEntry 6 }
|
|
|
|
ipNewCfgGwArp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the ARP/Neighbor Discovery health checks."
|
|
::= { ipNewCfgGwEntry 7 }
|
|
|
|
ipNewCfgGwVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN number for this gateway. The first 4 entries in the table
|
|
are only used for default gateway load balancing hence the VLAN
|
|
cannot be specified for the first 4 entries."
|
|
::= { ipNewCfgGwEntry 8 }
|
|
|
|
ipNewCfgGwPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
high(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of the default route for this gateway. High priority
|
|
means that the default gateway route will have higher priority
|
|
over learned default routes. Low priority means that the default
|
|
gateway route will have lower priority than learned default
|
|
routes."
|
|
::= { ipNewCfgGwEntry 9 }
|
|
|
|
|
|
ipNewCfgGwIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address."
|
|
::= { ipNewCfgGwEntry 10 }
|
|
|
|
ipNewCfgGwIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the gateway. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipNewCfgGwEntry 11 }
|
|
|
|
|
|
--
|
|
-- IP Static Route Configuration
|
|
--
|
|
ipStaticRouteTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the Static Route table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipStaticRouteCfg 1 }
|
|
|
|
ipCurCfgStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpCurCfgStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static routes in the current configuration block.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipStaticRouteCfg 2 }
|
|
|
|
ipCurCfgStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX IpCurCfgStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IP route table"
|
|
|
|
INDEX { ipCurCfgStaticRouteIndx }
|
|
::= { ipCurCfgStaticRouteTable 1 }
|
|
|
|
IpCurCfgStaticRouteEntry ::= SEQUENCE {
|
|
ipCurCfgStaticRouteIndx Integer32,
|
|
ipCurCfgStaticRouteDestIp IpAddress,
|
|
ipCurCfgStaticRouteMask IpAddress,
|
|
ipCurCfgStaticRouteGateway IpAddress,
|
|
ipCurCfgStaticRouteInterface Integer32
|
|
}
|
|
|
|
ipCurCfgStaticRouteIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the static routing table."
|
|
::= { ipCurCfgStaticRouteEntry 1}
|
|
|
|
ipCurCfgStaticRouteDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipCurCfgStaticRouteEntry 2}
|
|
|
|
ipCurCfgStaticRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipCurCfgStaticRouteEntry 3}
|
|
|
|
ipCurCfgStaticRouteGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipCurCfgStaticRouteEntry 4}
|
|
|
|
ipCurCfgStaticRouteInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP interface of this route. The IP address of the specified
|
|
interface shall be use as source IP when performs routing."
|
|
::= { ipCurCfgStaticRouteEntry 5}
|
|
|
|
ipNewCfgStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNewCfgStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static routes in the new configuration block.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipStaticRouteCfg 3 }
|
|
|
|
ipNewCfgStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX IpNewCfgStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IP route table,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipNewCfgStaticRouteIndx }
|
|
::= { ipNewCfgStaticRouteTable 1 }
|
|
|
|
IpNewCfgStaticRouteEntry ::= SEQUENCE {
|
|
ipNewCfgStaticRouteIndx Integer32,
|
|
ipNewCfgStaticRouteDestIp IpAddress,
|
|
ipNewCfgStaticRouteMask IpAddress,
|
|
ipNewCfgStaticRouteGateway IpAddress,
|
|
ipNewCfgStaticRouteAction INTEGER,
|
|
ipNewCfgStaticRouteInterface Integer32
|
|
}
|
|
|
|
ipNewCfgStaticRouteIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the static routing table."
|
|
::= { ipNewCfgStaticRouteEntry 1}
|
|
|
|
ipNewCfgStaticRouteDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipNewCfgStaticRouteEntry 2}
|
|
|
|
ipNewCfgStaticRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of this route."
|
|
::= { ipNewCfgStaticRouteEntry 3}
|
|
|
|
ipNewCfgStaticRouteGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the gateway for this route."
|
|
::= { ipNewCfgStaticRouteEntry 4}
|
|
|
|
ipNewCfgStaticRouteAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other is returned. Setting the value to anything other
|
|
than 2(delete) has no effect on the state of the row."
|
|
::= { ipNewCfgStaticRouteEntry 5 }
|
|
|
|
ipNewCfgStaticRouteInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP interface of this route. The IP address of the specified
|
|
interface shall be use as source IP when performs routing."
|
|
::= { ipNewCfgStaticRouteEntry 6 }
|
|
|
|
-- IPV6 static routes
|
|
ipv6CurCfgStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ipv6CurCfgStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ipv6 static routes in the current configuration block.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipStaticRouteCfg 4 }
|
|
|
|
ipv6CurCfgStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX Ipv6CurCfgStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IP route table"
|
|
INDEX { ipv6CurCfgStaticRouteIndx }
|
|
::= { ipv6CurCfgStaticRouteTable 1 }
|
|
|
|
Ipv6CurCfgStaticRouteEntry ::= SEQUENCE {
|
|
ipv6CurCfgStaticRouteIndx Integer32,
|
|
ipv6CurCfgStaticRouteDestIp DisplayString,
|
|
ipv6CurCfgStaticRouteMask Integer32,
|
|
ipv6CurCfgStaticRouteGateway DisplayString,
|
|
ipv6CurCfgStaticRouteVlan Integer32
|
|
}
|
|
|
|
|
|
ipv6CurCfgStaticRouteIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the ipv6 static routing table."
|
|
::= { ipv6CurCfgStaticRouteEntry 1}
|
|
|
|
ipv6CurCfgStaticRouteDestIp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The destination IPv6 address of this route.
|
|
Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in
|
|
any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipv6CurCfgStaticRouteEntry 2}
|
|
|
|
ipv6CurCfgStaticRouteMask OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix length associated with this IP address."
|
|
::= { ipv6CurCfgStaticRouteEntry 3}
|
|
|
|
ipv6CurCfgStaticRouteGateway OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IPv6 gateway address of this route.
|
|
Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in
|
|
any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipv6CurCfgStaticRouteEntry 4}
|
|
|
|
ipv6CurCfgStaticRouteVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4090)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 Vlan of this route. The IPv6 address of the specified
|
|
Vlan shall be use as source IP when performs routing."
|
|
::= { ipv6CurCfgStaticRouteEntry 5}
|
|
|
|
ipv6NewCfgStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ipv6NewCfgStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ipv6 static routes in the current configuration block.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipStaticRouteCfg 5 }
|
|
|
|
ipv6NewCfgStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX Ipv6NewCfgStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IP route table,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipv6NewCfgStaticRouteIndx }
|
|
::= { ipv6NewCfgStaticRouteTable 1 }
|
|
|
|
Ipv6NewCfgStaticRouteEntry ::= SEQUENCE {
|
|
ipv6NewCfgStaticRouteIndx Integer32,
|
|
ipv6NewCfgStaticRouteDestIp DisplayString,
|
|
ipv6NewCfgStaticRouteMask Integer32,
|
|
ipv6NewCfgStaticRouteGateway DisplayString,
|
|
ipv6NewCfgStaticRouteAction INTEGER,
|
|
ipv6NewCfgStaticRouteVlan Integer32
|
|
}
|
|
|
|
ipv6NewCfgStaticRouteIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the ipv6 static routing table."
|
|
::= { ipv6NewCfgStaticRouteEntry 1}
|
|
|
|
ipv6NewCfgStaticRouteDestIp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IPv6 address of this route.
|
|
Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in
|
|
any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipv6NewCfgStaticRouteEntry 2}
|
|
|
|
ipv6NewCfgStaticRouteMask OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix length associated with this IP address."
|
|
::= { ipv6NewCfgStaticRouteEntry 3}
|
|
|
|
ipv6NewCfgStaticRouteGateway OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IPv6 gateway address of this route.
|
|
Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in
|
|
any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipv6NewCfgStaticRouteEntry 4}
|
|
|
|
ipv6NewCfgStaticRouteAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other is returned. Setting the value to anything other
|
|
than 2(delete) has no effect on the state of the row."
|
|
::= { ipv6NewCfgStaticRouteEntry 5 }
|
|
|
|
ipv6NewCfgStaticRouteVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4090)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 Vlan of this route. The IPv6 address of the specified
|
|
vlan shall be use as source IP when performs routing."
|
|
::= { ipv6NewCfgStaticRouteEntry 6}
|
|
|
|
-- Static Tunnel Route Table IPv4
|
|
|
|
ipStaticTnlRouteTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the Static Tunnel Route table."
|
|
::= { ipStaticRouteCfg 6 }
|
|
|
|
ipCurCfgStaticTnlRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpCurCfgStaticTnlRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static routes in the current configuration block."
|
|
::= { ipStaticRouteCfg 7 }
|
|
|
|
ipCurCfgStaticTnlRouteEntry OBJECT-TYPE
|
|
SYNTAX IpCurCfgStaticTnlRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IP route table"
|
|
INDEX { ipCurCfgStaticTnlRouteIndx }
|
|
::= { ipCurCfgStaticTnlRouteTable 1 }
|
|
|
|
IpCurCfgStaticTnlRouteEntry ::= SEQUENCE {
|
|
ipCurCfgStaticTnlRouteIndx Integer32,
|
|
ipCurCfgStaticTnlRouteDestIp IpAddress,
|
|
ipCurCfgStaticTnlRouteMask IpAddress,
|
|
ipCurCfgStaticTnlRouteTunnelId DisplayString
|
|
}
|
|
|
|
ipCurCfgStaticTnlRouteIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the static routing table."
|
|
::= { ipCurCfgStaticTnlRouteEntry 1}
|
|
|
|
ipCurCfgStaticTnlRouteDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipCurCfgStaticTnlRouteEntry 2}
|
|
|
|
ipCurCfgStaticTnlRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipCurCfgStaticTnlRouteEntry 3}
|
|
|
|
ipCurCfgStaticTnlRouteTunnelId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tunnel ID for this route."
|
|
::= { ipCurCfgStaticTnlRouteEntry 4}
|
|
|
|
ipNewCfgStaticTnlRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNewCfgStaticTnlRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static routes in the new configuration block."
|
|
::= { ipStaticRouteCfg 8 }
|
|
|
|
ipNewCfgStaticTnlRouteEntry OBJECT-TYPE
|
|
SYNTAX IpNewCfgStaticTnlRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IP route table"
|
|
INDEX { ipNewCfgStaticTnlRouteIndx }
|
|
::= { ipNewCfgStaticTnlRouteTable 1 }
|
|
|
|
IpNewCfgStaticTnlRouteEntry ::= SEQUENCE {
|
|
ipNewCfgStaticTnlRouteIndx Integer32,
|
|
ipNewCfgStaticTnlRouteDestIp IpAddress,
|
|
ipNewCfgStaticTnlRouteMask IpAddress,
|
|
ipNewCfgStaticTnlRouteTunnelId DisplayString,
|
|
ipNewCfgStaticTnlRouteAction INTEGER
|
|
}
|
|
|
|
ipNewCfgStaticTnlRouteIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the static routing table."
|
|
::= { ipNewCfgStaticTnlRouteEntry 1}
|
|
|
|
ipNewCfgStaticTnlRouteDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipNewCfgStaticTnlRouteEntry 2}
|
|
|
|
ipNewCfgStaticTnlRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of this route."
|
|
::= { ipNewCfgStaticTnlRouteEntry 3}
|
|
|
|
ipNewCfgStaticTnlRouteTunnelId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tunnel ID for this route."
|
|
::= { ipNewCfgStaticTnlRouteEntry 4}
|
|
|
|
ipNewCfgStaticTnlRouteAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other is returned. Setting the value to anything other
|
|
than 2(delete) has no effect on the state of the row."
|
|
::= { ipNewCfgStaticTnlRouteEntry 5 }
|
|
|
|
-- Static Tunnel Route configuration table IPV6
|
|
|
|
ipv6CurCfgStaticTnlRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ipv6CurCfgStaticTnlRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static routes in the current configuration block."
|
|
::= { ipStaticRouteCfg 9 }
|
|
|
|
ipv6CurCfgStaticTnlRouteEntry OBJECT-TYPE
|
|
SYNTAX Ipv6CurCfgStaticTnlRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IP route table"
|
|
INDEX { ipv6CurCfgStaticTnlRouteIndx }
|
|
::= { ipv6CurCfgStaticTnlRouteTable 1 }
|
|
|
|
Ipv6CurCfgStaticTnlRouteEntry ::= SEQUENCE {
|
|
ipv6CurCfgStaticTnlRouteIndx Integer32,
|
|
ipv6CurCfgStaticTnlRouteDestIp DisplayString,
|
|
ipv6CurCfgStaticTnlRoutePrefixLen Integer32,
|
|
ipv6CurCfgStaticTnlRouteTunnelId DisplayString
|
|
}
|
|
|
|
ipv6CurCfgStaticTnlRouteIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the static routing table."
|
|
::= { ipv6CurCfgStaticTnlRouteEntry 1}
|
|
|
|
ipv6CurCfgStaticTnlRouteDestIp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipv6CurCfgStaticTnlRouteEntry 2}
|
|
|
|
ipv6CurCfgStaticTnlRoutePrefixLen OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipv6CurCfgStaticTnlRouteEntry 3}
|
|
|
|
ipv6CurCfgStaticTnlRouteTunnelId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tunnel ID for this route."
|
|
::= { ipv6CurCfgStaticTnlRouteEntry 4}
|
|
|
|
ipv6NewCfgStaticTnlRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ipv6NewCfgStaticTnlRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static routes in the new configuration block."
|
|
::= { ipStaticRouteCfg 10 }
|
|
|
|
ipv6NewCfgStaticTnlRouteEntry OBJECT-TYPE
|
|
SYNTAX Ipv6NewCfgStaticTnlRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IP route table"
|
|
INDEX { ipv6NewCfgStaticTnlRouteIndx }
|
|
::= { ipv6NewCfgStaticTnlRouteTable 1 }
|
|
|
|
Ipv6NewCfgStaticTnlRouteEntry ::= SEQUENCE {
|
|
ipv6NewCfgStaticTnlRouteIndx Integer32,
|
|
ipv6NewCfgStaticTnlRouteDestIp DisplayString,
|
|
ipv6NewCfgStaticTnlRoutePrefixLen Integer32,
|
|
ipv6NewCfgStaticTnlRouteTunnelId DisplayString,
|
|
ipv6NewCfgStaticTnlRouteAction INTEGER
|
|
}
|
|
|
|
ipv6NewCfgStaticTnlRouteIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the static routing table."
|
|
::= { ipv6NewCfgStaticTnlRouteEntry 1}
|
|
|
|
ipv6NewCfgStaticTnlRouteDestIp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipv6NewCfgStaticTnlRouteEntry 2}
|
|
|
|
ipv6NewCfgStaticTnlRoutePrefixLen OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of this route."
|
|
::= { ipv6NewCfgStaticTnlRouteEntry 3}
|
|
|
|
ipv6NewCfgStaticTnlRouteTunnelId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tunnel ID for this route."
|
|
::= { ipv6NewCfgStaticTnlRouteEntry 4}
|
|
|
|
ipv6NewCfgStaticTnlRouteAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other is returned. Setting the value to anything other
|
|
than 2(delete) has no effect on the state of the row."
|
|
::= { ipv6NewCfgStaticTnlRouteEntry 5 }
|
|
|
|
-- RIP version 1 Configuration
|
|
|
|
ripCurCfgSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable supplying route updates for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 1 }
|
|
|
|
ripNewCfgSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable supplying route updates for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 2 }
|
|
|
|
ripCurCfgListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable listening to route updates for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 3 }
|
|
|
|
ripNewCfgListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable listening to route updates for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 4 }
|
|
|
|
ripCurCfgDefListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable listening to default routes for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 5 }
|
|
|
|
ripNewCfgDefListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable listening to default routes for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 6 }
|
|
|
|
ripCurCfgStaticSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable supplying static route updates for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 7 }
|
|
|
|
ripNewCfgStaticSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable supplying static route updates for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 8 }
|
|
|
|
ripCurCfgUpdatePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..120)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Update Period in seconds for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 9 }
|
|
|
|
ripNewCfgUpdatePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Update period in seconds for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 10 }
|
|
|
|
ripCurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(2),
|
|
off(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIP global state for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 11 }
|
|
|
|
ripNewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(2),
|
|
off(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Globally turn RIP on or off for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 12 }
|
|
|
|
ripCurCfgPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIPv1 poison reverse.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 13 }
|
|
|
|
ripNewCfgPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIPv1 poison reverse.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 14 }
|
|
|
|
ripCurCfgVip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertise VIP Host Routes for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 15 }
|
|
|
|
ripNewCfgVip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertise VIP Host Routes for RIPv1.
|
|
RIPv1 mibs are not supported anymore.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripCfg 16 }
|
|
|
|
-- RIP version 2 Configuration
|
|
|
|
ripCurCfgIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RipCurCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of RIPv2 on IP interface configuration in the current_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { rip2Cfg 1 }
|
|
|
|
ripCurCfgIntfEntry OBJECT-TYPE
|
|
SYNTAX RipCurCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about RIPv2 on IP interface.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ripCurCfgIntfIndex }
|
|
::= { ripCurCfgIntfTable 1 }
|
|
|
|
RipCurCfgIntfEntry ::= SEQUENCE {
|
|
ripCurCfgIntfIndex Integer32,
|
|
ripCurCfgIntfVersion INTEGER,
|
|
ripCurCfgIntfSupply INTEGER,
|
|
ripCurCfgIntfListen INTEGER,
|
|
ripCurCfgIntfDefListen INTEGER,
|
|
ripCurCfgIntfTrigUpdate INTEGER,
|
|
ripCurCfgIntfMcastUpdate INTEGER,
|
|
ripCurCfgIntfPoisonReverse INTEGER,
|
|
ripCurCfgIntfState INTEGER,
|
|
ripCurCfgIntfMetric INTEGER,
|
|
ripCurCfgIntfAuth INTEGER,
|
|
ripCurCfgIntfKey DisplayString,
|
|
ripCurCfgIntfDefault INTEGER
|
|
}
|
|
|
|
ripCurCfgIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface number for which the RIPv2 information is related."
|
|
::= { ripCurCfgIntfEntry 1}
|
|
|
|
ripCurCfgIntfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ripVersion1(1),
|
|
ripVersion2(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIP version. Only RIPv2 is supported"
|
|
::= { ripCurCfgIntfEntry 2 }
|
|
|
|
ripCurCfgIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable RIPv2 protocol."
|
|
::= { ripCurCfgIntfEntry 3 }
|
|
|
|
|
|
ripCurCfgIntfListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable listening to route updates for RIPv2."
|
|
::= { ripCurCfgIntfEntry 4 }
|
|
|
|
ripCurCfgIntfDefListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Enable or disable listening to default routes for RIPv2."
|
|
::= { ripCurCfgIntfEntry 5 }
|
|
|
|
ripCurCfgIntfTrigUpdate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable triggered updates for RIPv2."
|
|
::= { ripCurCfgIntfEntry 6 }
|
|
|
|
ripCurCfgIntfMcastUpdate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable multicast updates for RIPv2."
|
|
::= { ripCurCfgIntfEntry 7 }
|
|
|
|
ripCurCfgIntfPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIPv2 poison reverse."
|
|
::= { ripCurCfgIntfEntry 8 }
|
|
|
|
ripCurCfgIntfSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable supplying route updates for RIPv2."
|
|
::= { ripCurCfgIntfEntry 9 }
|
|
|
|
ripCurCfgIntfMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIPv2 route metric for this interface."
|
|
::= { ripCurCfgIntfEntry 10 }
|
|
|
|
ripCurCfgIntfAuth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
password(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Authentication used on this interface for RIPv2."
|
|
::= { ripCurCfgIntfEntry 11 }
|
|
|
|
ripCurCfgIntfKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIPv2 update authentication password."
|
|
::= { ripCurCfgIntfEntry 12 }
|
|
|
|
ripCurCfgIntfDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
both(1),
|
|
listen(2),
|
|
supply(3),
|
|
none(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies what RIPv2 does with default routes."
|
|
::= { ripCurCfgIntfEntry 13 }
|
|
|
|
ripNewCfgIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RipNewCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of RIPv2 on IP interface configuration in the new_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { rip2Cfg 2 }
|
|
|
|
ripNewCfgIntfEntry OBJECT-TYPE
|
|
SYNTAX RipNewCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about RIPv2 on IP interface.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ripNewCfgIntfIndex }
|
|
::= { ripNewCfgIntfTable 1 }
|
|
|
|
RipNewCfgIntfEntry ::= SEQUENCE {
|
|
ripNewCfgIntfIndex Integer32,
|
|
ripNewCfgIntfVersion INTEGER,
|
|
ripNewCfgIntfSupply INTEGER,
|
|
ripNewCfgIntfListen INTEGER,
|
|
ripNewCfgIntfDefListen INTEGER,
|
|
ripNewCfgIntfTrigUpdate INTEGER,
|
|
ripNewCfgIntfMcastUpdate INTEGER,
|
|
ripNewCfgIntfPoisonReverse INTEGER,
|
|
ripNewCfgIntfState INTEGER,
|
|
ripNewCfgIntfMetric INTEGER,
|
|
ripNewCfgIntfAuth INTEGER,
|
|
ripNewCfgIntfKey DisplayString,
|
|
ripNewCfgIntfDefault INTEGER
|
|
}
|
|
|
|
ripNewCfgIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface number for which the RIPv2 information is related."
|
|
::= { ripNewCfgIntfEntry 1}
|
|
|
|
ripNewCfgIntfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ripVersion1(1),
|
|
ripVersion2(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIP version. Only RIPv2 is supported."
|
|
::= { ripNewCfgIntfEntry 2 }
|
|
|
|
ripNewCfgIntfSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable supplying route updates for RIPv2."
|
|
::= { ripNewCfgIntfEntry 3 }
|
|
|
|
ripNewCfgIntfListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable listening to route updates for RIPv2."
|
|
::= { ripNewCfgIntfEntry 4 }
|
|
|
|
ripNewCfgIntfDefListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Enable or disable listening to default routes for RIPv2."
|
|
::= { ripNewCfgIntfEntry 5 }
|
|
|
|
ripNewCfgIntfTrigUpdate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable triggered updates for RIPv2."
|
|
::= { ripNewCfgIntfEntry 6 }
|
|
|
|
ripNewCfgIntfMcastUpdate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable multicast updates for RIPv2."
|
|
::= { ripNewCfgIntfEntry 7 }
|
|
|
|
ripNewCfgIntfPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIPv2 poison reverse."
|
|
::= { ripNewCfgIntfEntry 8 }
|
|
|
|
ripNewCfgIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable RIPv2 protocol."
|
|
::= { ripNewCfgIntfEntry 9 }
|
|
|
|
ripNewCfgIntfMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIPv2 route metric for this interface."
|
|
::= { ripNewCfgIntfEntry 10 }
|
|
|
|
ripNewCfgIntfAuth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
password(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Authentication used on this interface for RIPv2."
|
|
::= { ripNewCfgIntfEntry 11 }
|
|
|
|
ripNewCfgIntfKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIPv2 update authentication password."
|
|
::= { ripNewCfgIntfEntry 12 }
|
|
|
|
ripNewCfgIntfDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
both(1),
|
|
listen(2),
|
|
supply(3),
|
|
none(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies what RIPv2 does with default routes. The default routes
|
|
action could be set to listen/supply/both/none."
|
|
::= { ripNewCfgIntfEntry 13 }
|
|
|
|
ripGeneral OBJECT IDENTIFIER ::= { rip2Cfg 3 }
|
|
|
|
rip2CurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIPv2 global state.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripGeneral 1 }
|
|
|
|
rip2NewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Globally turn RIPv2 on or off.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripGeneral 2 }
|
|
|
|
rip2CurCfgUpdatePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..120)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Update Period in seconds for RIPv2.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripGeneral 3 }
|
|
|
|
rip2NewCfgUpdatePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Update Period in seconds for RIPv2.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripGeneral 4 }
|
|
|
|
rip2CurCfgVip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertise VIP Host Routes for RIPv2.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripGeneral 5 }
|
|
|
|
rip2NewCfgVip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertise VIP Host Routes for RIPv2.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripGeneral 6 }
|
|
|
|
rip2CurCfgStaticSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertise Static Routes for RIPv2.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripGeneral 7 }
|
|
|
|
rip2NewCfgStaticSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertise Static Routes for RIPv2.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ripGeneral 8 }
|
|
|
|
-- IP Forwarding Configuration
|
|
|
|
ipFwdGeneralCfg OBJECT IDENTIFIER ::= {ipForwardCfg 1 }
|
|
|
|
ipFwdCurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(2),
|
|
off(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP forwarding global state.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipFwdGeneralCfg 1 }
|
|
|
|
ipFwdNewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(2),
|
|
off(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP forwarding global state.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipFwdGeneralCfg 2 }
|
|
|
|
ipFwdCurCfgDirectedBcast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable forwarding directed broadcasts.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipFwdGeneralCfg 3 }
|
|
|
|
ipFwdNewCfgDirectedBcast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable forwarding directed broadcasts.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipFwdGeneralCfg 4 }
|
|
|
|
ipFwdCurCfgNoICMPRedirect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable no icmp redirects.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipFwdGeneralCfg 5 }
|
|
|
|
ipFwdNewCfgNoICMPRedirect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable no icmp redirects.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipFwdGeneralCfg 6 }
|
|
|
|
ipFwdCurCfgRtCache OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable SP Route Caching.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipFwdGeneralCfg 7 }
|
|
|
|
ipFwdNewCfgRtCache OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable SP Route Caching.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipFwdGeneralCfg 8 }
|
|
|
|
ipFwdPortTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the IP Port table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipForwardCfg 2 }
|
|
|
|
ipFwdCurCfgPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpFwdCurCfgPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ports and their forwarding states,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipForwardCfg 3 }
|
|
|
|
ipFwdCurCfgPortEntry OBJECT-TYPE
|
|
SYNTAX IpFwdCurCfgPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the ipFwdCurCfgPortTable,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipFwdCurCfgPortIndex }
|
|
::= { ipFwdCurCfgPortTable 1 }
|
|
|
|
IpFwdCurCfgPortEntry ::= SEQUENCE {
|
|
ipFwdCurCfgPortIndex Integer32,
|
|
ipFwdCurCfgPortState INTEGER
|
|
}
|
|
|
|
ipFwdCurCfgPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number for which the forwarding state information pertains."
|
|
::= { ipFwdCurCfgPortEntry 1 }
|
|
|
|
ipFwdCurCfgPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The forwarding state of the port."
|
|
::= { ipFwdCurCfgPortEntry 2 }
|
|
|
|
ipFwdNewCfgPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpFwdNewCfgPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ports and their forwarding states,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipForwardCfg 4 }
|
|
|
|
ipFwdNewCfgPortEntry OBJECT-TYPE
|
|
SYNTAX IpFwdNewCfgPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the ipFwdNewCfgPortTable,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipFwdNewCfgPortIndex }
|
|
::= { ipFwdNewCfgPortTable 1 }
|
|
|
|
IpFwdNewCfgPortEntry ::= SEQUENCE {
|
|
ipFwdNewCfgPortIndex Integer32,
|
|
ipFwdNewCfgPortState INTEGER
|
|
}
|
|
|
|
ipFwdNewCfgPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number for which the forwarding state information pertains."
|
|
::= { ipFwdNewCfgPortEntry 1 }
|
|
|
|
ipFwdNewCfgPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The forwarding state of the port."
|
|
::= { ipFwdNewCfgPortEntry 2 }
|
|
|
|
ipFwdLocalTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the Local table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipForwardCfg 5 }
|
|
|
|
ipFwdCurCfgLocalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpFwdCurCfgLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of local network definition.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipForwardCfg 6 }
|
|
|
|
ipFwdCurCfgLocalEntry OBJECT-TYPE
|
|
SYNTAX IpFwdCurCfgLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the ipFwdCurCfgLocalTable,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipFwdCurCfgLocalIndex }
|
|
::= { ipFwdCurCfgLocalTable 1 }
|
|
|
|
IpFwdCurCfgLocalEntry ::= SEQUENCE {
|
|
ipFwdCurCfgLocalIndex Integer32,
|
|
ipFwdCurCfgLocalSubnet IpAddress,
|
|
ipFwdCurCfgLocalMask IpAddress
|
|
}
|
|
|
|
ipFwdCurCfgLocalIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of ipFwdCurCfgLocalTable."
|
|
::= { ipFwdCurCfgLocalEntry 1 }
|
|
|
|
ipFwdCurCfgLocalSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current local IP subnet."
|
|
::= { ipFwdCurCfgLocalEntry 2 }
|
|
|
|
ipFwdCurCfgLocalMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current local IP subnet mask."
|
|
::= { ipFwdCurCfgLocalEntry 3 }
|
|
|
|
ipFwdNewCfgLocalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpFwdNewCfgLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of local network definition.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipForwardCfg 7 }
|
|
|
|
ipFwdNewCfgLocalEntry OBJECT-TYPE
|
|
SYNTAX IpFwdNewCfgLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the ipFwdNewCfgLocalTable,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipFwdNewCfgLocalIndex }
|
|
::= { ipFwdNewCfgLocalTable 1 }
|
|
|
|
IpFwdNewCfgLocalEntry ::= SEQUENCE {
|
|
ipFwdNewCfgLocalIndex Integer32,
|
|
ipFwdNewCfgLocalSubnet IpAddress,
|
|
ipFwdNewCfgLocalMask IpAddress,
|
|
ipFwdNewCfgLocalDelete INTEGER
|
|
}
|
|
|
|
ipFwdNewCfgLocalIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of ipFwdNewCfgLocalTable."
|
|
::= { ipFwdNewCfgLocalEntry 1 }
|
|
|
|
ipFwdNewCfgLocalSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The new local IP subnet."
|
|
::= { ipFwdNewCfgLocalEntry 2 }
|
|
|
|
ipFwdNewCfgLocalMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The new local IP subnet mask."
|
|
::= { ipFwdNewCfgLocalEntry 3 }
|
|
|
|
ipFwdNewCfgLocalDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ipFwdNewCfgLocalEntry 4 }
|
|
|
|
ipv6FwdCurCfgLocalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ipv6FwdCurCfgLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of local network definition.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipForwardCfg 8 }
|
|
|
|
ipv6FwdCurCfgLocalEntry OBJECT-TYPE
|
|
SYNTAX Ipv6FwdCurCfgLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the ipv6FwdCurCfgLocalTable,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipv6FwdCurCfgLocalIndex }
|
|
::= { ipv6FwdCurCfgLocalTable 1 }
|
|
|
|
Ipv6FwdCurCfgLocalEntry ::= SEQUENCE {
|
|
ipv6FwdCurCfgLocalIndex Integer32,
|
|
ipv6FwdCurCfgLocalSubnet DisplayString,
|
|
ipv6FwdCurCfgLocalMask Integer32
|
|
}
|
|
|
|
ipv6FwdCurCfgLocalIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of ipv6FwdCurCfgLocalTable."
|
|
::= { ipv6FwdCurCfgLocalEntry 1 }
|
|
|
|
ipv6FwdCurCfgLocalSubnet OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current local IPv6 subnet."
|
|
::= { ipv6FwdCurCfgLocalEntry 2 }
|
|
|
|
ipv6FwdCurCfgLocalMask OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current local IPv6 subnet mask."
|
|
::= { ipv6FwdCurCfgLocalEntry 3 }
|
|
|
|
ipv6FwdNewCfgLocalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ipv6FwdNewCfgLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of local IPv6 network definition.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipForwardCfg 9 }
|
|
|
|
ipv6FwdNewCfgLocalEntry OBJECT-TYPE
|
|
SYNTAX Ipv6FwdNewCfgLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the ipv6FwdNewCfgLocalTable "
|
|
INDEX { ipv6FwdNewCfgLocalIndex }
|
|
::= { ipv6FwdNewCfgLocalTable 1 }
|
|
|
|
Ipv6FwdNewCfgLocalEntry ::= SEQUENCE {
|
|
ipv6FwdNewCfgLocalIndex Integer32,
|
|
ipv6FwdNewCfgLocalSubnet DisplayString,
|
|
ipv6FwdNewCfgLocalMask Integer32,
|
|
ipv6FwdNewCfgLocalDelete INTEGER
|
|
}
|
|
|
|
ipv6FwdNewCfgLocalIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of ipv6FwdNewCfgLocalTable."
|
|
::= { ipv6FwdNewCfgLocalEntry 1 }
|
|
|
|
ipv6FwdNewCfgLocalSubnet OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The new local IPv6 subnet."
|
|
::= { ipv6FwdNewCfgLocalEntry 2 }
|
|
|
|
ipv6FwdNewCfgLocalMask OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The new local IPv6 subnet mask."
|
|
::= { ipv6FwdNewCfgLocalEntry 3 }
|
|
|
|
ipv6FwdNewCfgLocalDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ipv6FwdNewCfgLocalEntry 4 }
|
|
|
|
--
|
|
-- ARP configuration
|
|
--
|
|
arpCurCfgReARPPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (2..120)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Re-ARP Period in seconds.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { arpCfg 1 }
|
|
|
|
arpNewCfgReARPPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (2..120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Re-ARP Period in seconds.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { arpCfg 2 }
|
|
--
|
|
-- IP Bootp Configration
|
|
--
|
|
ipCurCfgBootpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of BOOTP server.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipBootpCfg 1 }
|
|
|
|
ipNewCfgBootpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of BOOTP server.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipBootpCfg 2 }
|
|
|
|
ipCurCfgBootpAddr2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of second BOOTP server.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipBootpCfg 3 }
|
|
|
|
ipNewCfgBootpAddr2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of second BOOTP server.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipBootpCfg 4 }
|
|
|
|
ipCurCfgBootpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of BOOTP relay.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipBootpCfg 5 }
|
|
|
|
ipNewCfgBootpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of BOOTP relay.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipBootpCfg 6 }
|
|
|
|
ipCurCfgBootpPrsvPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable preserve source port by relay agent.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipBootpCfg 7 }
|
|
|
|
|
|
ipNewCfgBootpPrsvPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable preserve source port by relay agent,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipBootpCfg 8 }
|
|
|
|
|
|
-- VRRP (Virtual Router Redundantcy Protocol) Group
|
|
|
|
vrrpGeneral OBJECT IDENTIFIER ::= { vrrpCfg 1 }
|
|
|
|
vrrpCurCfgGenState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable VRRP operation globally.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 1 }
|
|
|
|
vrrpNewCfgGenState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable VRRP operation globally.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 2 }
|
|
|
|
vrrpCurCfgGenTckVirtRtrInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the state of other virtual routers.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 3 }
|
|
|
|
vrrpNewCfgGenTckVirtRtrInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the state of other virtual routers.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 4 }
|
|
|
|
vrrpCurCfgGenTckIpIntfInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the state of other router interfaces.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 5 }
|
|
|
|
vrrpNewCfgGenTckIpIntfInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the state of other router interfaces.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 6 }
|
|
|
|
vrrpCurCfgGenTckVlanPortInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the port state of ports that belongs to the
|
|
same virtual LAN as the virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 7 }
|
|
|
|
vrrpNewCfgGenTckVlanPortInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the port state of ports that belongs to the
|
|
same virtual LAN as the virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 8 }
|
|
|
|
vrrpCurCfgGenTckL4PortInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the Layer 4 port states. This is valid when
|
|
virtual server is configured as a VRRP virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 9 }
|
|
|
|
vrrpNewCfgGenTckL4PortInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the Layer 4 port states. This is valid when
|
|
virtual server is configured as a VRRP virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 10 }
|
|
|
|
vrrpCurCfgGenTckRServerInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the state of real servers under the virtual
|
|
server which is configured as a VRRP virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 11 }
|
|
|
|
vrrpNewCfgGenTckRServerInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the state of real servers under the virtual
|
|
server which is configured as a VRRP virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 12 }
|
|
|
|
vrrpCurCfgGenTckHsrpInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The
|
|
priority is adjusted by tracking the HSRP advertisements.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 13 }
|
|
|
|
vrrpNewCfgGenTckHsrpInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The
|
|
priority is adjusted by tracking the HSRP advertisements.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 14 }
|
|
|
|
vrrpCurCfgGenHotstandby OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable hotstandby processing.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 15 }
|
|
|
|
vrrpNewCfgGenHotstandby OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable hotstandby processing.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 16 }
|
|
|
|
vrrpCurCfgGenTckHsrvInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The
|
|
priority is adjusted by tracking the HSRP advertisements
|
|
by VLAN.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 17 }
|
|
|
|
vrrpNewCfgGenTckHsrvInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The
|
|
priority is adjusted by tracking the HSRP advertisements
|
|
by VLAN.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 18 }
|
|
|
|
vrrpCurCfgGenHoldoff OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time for VRRP virtual router to hold before it
|
|
begins to change state to backup or master state.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 19 }
|
|
|
|
vrrpNewCfgGenHoldoff OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time for VRRP virtual router to hold before it
|
|
begins to change state to backup or master state.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 20 }
|
|
|
|
vrrpCurCfgGenOspfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Cost Adjustment,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 23 }
|
|
|
|
vrrpNewCfgGenOspfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Cost Adjustment,
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 24 }
|
|
vrrpCurCfgGenTckSwExtInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the availability of Switch Extension in the chassis.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 25 }
|
|
|
|
vrrpNewCfgGenTckSwExtInc OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The increment of VRRP virtual router priority. The priority is
|
|
adjusted by tracking the availability of Switch Extension in the chassis.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 26 }
|
|
vrrpCurCfgGenUnicast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable unicast advertisement.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 27 }
|
|
|
|
vrrpNewCfgGenUnicast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable unicast advertisement.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 28 }
|
|
vrrpCurCfgGenFovdelay OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable the delay to process the traffic on ports during failover (hot-standby only).
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 29 }
|
|
|
|
vrrpNewCfgGenFovdelay OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable the delay to process the traffic on ports during failover (hot-standby only).
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpGeneral 30 }
|
|
vrrpVirtRtrTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in VRRP virtual router table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 2 }
|
|
|
|
vrrpCurCfgVirtRtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VRRP virtual routers configuration in current_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 3 }
|
|
|
|
vrrpCurCfgVirtRtrTableEntry OBJECT-TYPE
|
|
SYNTAX VrrpCurCfgVirtRtrTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a VRRP virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { vrrpCurCfgVirtRtrIndx }
|
|
::= { vrrpCurCfgVirtRtrTable 1 }
|
|
|
|
VrrpCurCfgVirtRtrTableEntry ::= SEQUENCE {
|
|
vrrpCurCfgVirtRtrIndx Integer32,
|
|
vrrpCurCfgVirtRtrID INTEGER,
|
|
vrrpCurCfgVirtRtrAddr IpAddress,
|
|
vrrpCurCfgVirtRtrIfIndex Integer32,
|
|
vrrpCurCfgVirtRtrInterval INTEGER,
|
|
vrrpCurCfgVirtRtrPriority INTEGER,
|
|
vrrpCurCfgVirtRtrPreempt INTEGER,
|
|
vrrpCurCfgVirtRtrState INTEGER,
|
|
vrrpCurCfgVirtRtrSharing INTEGER,
|
|
vrrpCurCfgVirtRtrTckVirtRtr INTEGER,
|
|
vrrpCurCfgVirtRtrTckIpIntf INTEGER,
|
|
vrrpCurCfgVirtRtrTckL4Port INTEGER,
|
|
vrrpCurCfgVirtRtrTckRServer INTEGER,
|
|
vrrpCurCfgVirtRtrTckHsrp INTEGER,
|
|
vrrpCurCfgVirtRtrTckHsrv INTEGER,
|
|
vrrpCurCfgVirtRtrTckVlanPort INTEGER,
|
|
vrrpCurCfgVirtRtrVersion INTEGER,
|
|
vrrpCurCfgVirtRtrIpv6Addr DisplayString,
|
|
vrrpCurCfgVirtRtrIpv6Interval INTEGER,
|
|
vrrpCurCfgVirtRtrOspfCost INTEGER,
|
|
vrrpCurCfgVirtRtrTckSwExt INTEGER,
|
|
vrrpCurCfgVirtRtrTckIslPort INTEGER
|
|
}
|
|
|
|
vrrpCurCfgVirtRtrIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router table index."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 1 }
|
|
|
|
vrrpCurCfgVirtRtrID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router identifier."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 2 }
|
|
|
|
vrrpCurCfgVirtRtrAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router IP address."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 3 }
|
|
|
|
vrrpCurCfgVirtRtrIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex that the VRRP virtual router is representing."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 4 }
|
|
|
|
vrrpCurCfgVirtRtrInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between VRRP advertisements in seconds."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 5 }
|
|
|
|
vrrpCurCfgVirtRtrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value to be used by the specified VRRP virtual routers."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 6 }
|
|
|
|
vrrpCurCfgVirtRtrPreempt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is for controlling whether a higher priority Backup
|
|
VRRP virtual router preempts a low priority Master.
|
|
|
|
enabled(1) - allow preemption
|
|
disabled(2) - prohibit preemption"
|
|
::= { vrrpCurCfgVirtRtrTableEntry 7 }
|
|
|
|
vrrpCurCfgVirtRtrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 8 }
|
|
|
|
vrrpCurCfgVirtRtrSharing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable load sharing of non-master virtual router."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 9 }
|
|
|
|
vrrpCurCfgVirtRtrTckVirtRtr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking other virtual routers for priority
|
|
adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckVirtRtrInc."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 10 }
|
|
|
|
vrrpCurCfgVirtRtrTckIpIntf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking other router interfaces for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckIpIntfInc."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 11 }
|
|
|
|
vrrpCurCfgVirtRtrTckVlanPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking port state of VLAN ports
|
|
for priority adjustment. The priority increment is
|
|
defined in vrrpCurCfgGenTckVlanPortInc."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 12 }
|
|
|
|
vrrpCurCfgVirtRtrTckL4Port OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Layer 4 port states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckL4PortInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 13 }
|
|
|
|
vrrpCurCfgVirtRtrTckRServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking real server states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckRServerInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 14 }
|
|
|
|
vrrpCurCfgVirtRtrTckHsrp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP advertisements for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckHsrpInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 15 }
|
|
|
|
vrrpCurCfgVirtRtrTckHsrv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP advertisements by VLAN for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckHsrvInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 16 }
|
|
|
|
vrrpCurCfgVirtRtrVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v4(1),
|
|
v6(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router IP Version."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 17 }
|
|
|
|
vrrpCurCfgVirtRtrIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the virtual router. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { vrrpCurCfgVirtRtrTableEntry 18 }
|
|
|
|
vrrpCurCfgVirtRtrIpv6Interval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between IPv6 VRRP advertisements in centiseconds."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 19 }
|
|
|
|
vrrpCurCfgVirtRtrTckSwExt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking the Switch Extension availability for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckSwExtInc."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 21 }
|
|
|
|
vrrpCurCfgVirtRtrOspfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF cost adjustment"
|
|
::= { vrrpCurCfgVirtRtrTableEntry 20 }
|
|
|
|
vrrpCurCfgVirtRtrTckIslPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include(1),
|
|
exclude(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Include or exclude ISL ports in tracking."
|
|
::= { vrrpCurCfgVirtRtrTableEntry 22 }
|
|
|
|
vrrpNewCfgVirtRtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VRRP virtual routers configuration in current_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 4 }
|
|
|
|
vrrpNewCfgVirtRtrTableEntry OBJECT-TYPE
|
|
SYNTAX VrrpNewCfgVirtRtrTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a VRRP virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { vrrpNewCfgVirtRtrIndx }
|
|
::= { vrrpNewCfgVirtRtrTable 1 }
|
|
|
|
VrrpNewCfgVirtRtrTableEntry ::= SEQUENCE {
|
|
vrrpNewCfgVirtRtrIndx Integer32,
|
|
vrrpNewCfgVirtRtrID INTEGER,
|
|
vrrpNewCfgVirtRtrAddr IpAddress,
|
|
vrrpNewCfgVirtRtrIfIndex Integer32,
|
|
vrrpNewCfgVirtRtrInterval INTEGER,
|
|
vrrpNewCfgVirtRtrPriority INTEGER,
|
|
vrrpNewCfgVirtRtrPreempt INTEGER,
|
|
vrrpNewCfgVirtRtrState INTEGER,
|
|
vrrpNewCfgVirtRtrDelete INTEGER,
|
|
vrrpNewCfgVirtRtrSharing INTEGER,
|
|
vrrpNewCfgVirtRtrTckVirtRtr INTEGER,
|
|
vrrpNewCfgVirtRtrTckIpIntf INTEGER,
|
|
vrrpNewCfgVirtRtrTckL4Port INTEGER,
|
|
vrrpNewCfgVirtRtrTckRServer INTEGER,
|
|
vrrpNewCfgVirtRtrTckHsrp INTEGER,
|
|
vrrpNewCfgVirtRtrTckHsrv INTEGER,
|
|
vrrpNewCfgVirtRtrTckVlanPort INTEGER,
|
|
vrrpNewCfgVirtRtrVersion INTEGER,
|
|
vrrpNewCfgVirtRtrIpv6Addr DisplayString,
|
|
vrrpNewCfgVirtRtrIpv6Interval INTEGER,
|
|
vrrpNewCfgVirtRtrOspfCost INTEGER,
|
|
vrrpNewCfgVirtRtrTckSwExt INTEGER,
|
|
vrrpNewCfgVirtRtrTckIslPort INTEGER
|
|
}
|
|
|
|
vrrpNewCfgVirtRtrIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router table index."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 1 }
|
|
|
|
vrrpNewCfgVirtRtrID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router identifier."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 2 }
|
|
|
|
vrrpNewCfgVirtRtrAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router IP address."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 3 }
|
|
|
|
vrrpNewCfgVirtRtrIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex that the VRRP virtual router is representing."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 4 }
|
|
|
|
vrrpNewCfgVirtRtrInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between VRRP advertisements in seconds."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 5 }
|
|
|
|
vrrpNewCfgVirtRtrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..254)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value to be used by the specified VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 6 }
|
|
|
|
vrrpNewCfgVirtRtrPreempt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is for controlling whether a higher priority Backup
|
|
VRRP virtual router preempts a low priority Master.
|
|
|
|
enabled(1) - allow preemption
|
|
disabled(2) - prohibit preemption"
|
|
::= { vrrpNewCfgVirtRtrTableEntry 7 }
|
|
|
|
vrrpNewCfgVirtRtrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 8 }
|
|
|
|
vrrpNewCfgVirtRtrDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than delete(2) has no effect on the state of the row."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 9 }
|
|
|
|
vrrpNewCfgVirtRtrSharing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable load sharing of non-master virtual router."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 10 }
|
|
|
|
vrrpNewCfgVirtRtrTckVirtRtr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking other virtual routers for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckVirtRtrInc."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 11 }
|
|
|
|
vrrpNewCfgVirtRtrTckIpIntf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking other router interfaces for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckIpIntfInc."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 12 }
|
|
|
|
vrrpNewCfgVirtRtrTckVlanPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking port state of VLAN ports
|
|
for priority adjustment. the priority increment is
|
|
defined in vrrpNewCfgGenTckVlanPortInc."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 13 }
|
|
|
|
vrrpNewCfgVirtRtrTckL4Port OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Layer 4 port states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckL4PortInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 14 }
|
|
|
|
vrrpNewCfgVirtRtrTckRServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking real server states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckRServerInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 15 }
|
|
|
|
vrrpNewCfgVirtRtrTckHsrp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP advertisements for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckHsrpInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 16 }
|
|
|
|
vrrpNewCfgVirtRtrTckHsrv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP by VLAN advertisements for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpNewCfgGenTckHsrvInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 17 }
|
|
|
|
vrrpNewCfgVirtRtrVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v4(1),
|
|
v6(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router IP Version."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 18 }
|
|
|
|
vrrpNewCfgVirtRtrIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the virtual router. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { vrrpNewCfgVirtRtrTableEntry 19 }
|
|
|
|
vrrpNewCfgVirtRtrIpv6Interval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between IPv6 VRRP advertisements in centiseconds."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 20 }
|
|
|
|
vrrpNewCfgVirtRtrOspfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Cost Adjustment"
|
|
::= { vrrpNewCfgVirtRtrTableEntry 21 }
|
|
|
|
vrrpNewCfgVirtRtrTckSwExt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Switch Extension availability for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpNewCfgGenTckSwExtInc."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 22 }
|
|
|
|
vrrpNewCfgVirtRtrTckIslPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include(1),
|
|
exclude(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Include or exclude ISL ports in tracking."
|
|
::= { vrrpNewCfgVirtRtrTableEntry 23 }
|
|
-- VRRP Interface Table
|
|
|
|
vrrpIfTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in VRRP interface table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 5 }
|
|
|
|
vrrpCurCfgIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpCurCfgIfTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VRRP interface configuration in current_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 6 }
|
|
|
|
vrrpCurCfgIfTableEntry OBJECT-TYPE
|
|
SYNTAX VrrpCurCfgIfTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a VRRP interface.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { vrrpCurCfgIfIndx }
|
|
::= { vrrpCurCfgIfTable 1 }
|
|
|
|
VrrpCurCfgIfTableEntry ::= SEQUENCE {
|
|
vrrpCurCfgIfIndx Integer32,
|
|
vrrpCurCfgIfAuthType INTEGER,
|
|
vrrpCurCfgIfPasswd DisplayString,
|
|
vrrpCurCfgIfIpAddr IpAddress
|
|
}
|
|
|
|
vrrpCurCfgIfIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP interface index. This is equivalent to IfIndex."
|
|
::= { vrrpCurCfgIfTableEntry 1 }
|
|
|
|
vrrpCurCfgIfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
simple-text-password(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of authentication being used.
|
|
none(1) - no authentication
|
|
simple-text-password(2) - use password specified in
|
|
vrrpCurCfgIfPasswd for authentication."
|
|
::= { vrrpCurCfgIfTableEntry 2 }
|
|
|
|
vrrpCurCfgIfPasswd OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The password for authentication."
|
|
::= { vrrpCurCfgIfTableEntry 3 }
|
|
|
|
vrrpCurCfgIfIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the VRRP interface.This is equivalent to ipCurCfgIntfAddr."
|
|
::= { vrrpCurCfgIfTableEntry 4 }
|
|
|
|
vrrpNewCfgIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpNewCfgIfTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VRRP interface configuration in current_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 7 }
|
|
|
|
vrrpNewCfgIfTableEntry OBJECT-TYPE
|
|
SYNTAX VrrpNewCfgIfTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a VRRP interface.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { vrrpNewCfgIfIndx }
|
|
::= { vrrpNewCfgIfTable 1 }
|
|
|
|
VrrpNewCfgIfTableEntry ::= SEQUENCE {
|
|
vrrpNewCfgIfIndx Integer32,
|
|
vrrpNewCfgIfAuthType INTEGER,
|
|
vrrpNewCfgIfPasswd DisplayString,
|
|
vrrpNewCfgIfDelete INTEGER
|
|
}
|
|
|
|
vrrpNewCfgIfIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP interface index. This is equivalent to IfIndex."
|
|
::= { vrrpNewCfgIfTableEntry 1 }
|
|
|
|
vrrpNewCfgIfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
simple-text-password(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of authentication being used.
|
|
none(1) - no authentication
|
|
simple-text-password(2) - use password specified in
|
|
vrrpNewCfgIfPasswd for authentication."
|
|
::= { vrrpNewCfgIfTableEntry 2 }
|
|
|
|
vrrpNewCfgIfPasswd OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The password for authentication."
|
|
::= { vrrpNewCfgIfTableEntry 3 }
|
|
|
|
vrrpNewCfgIfDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than delete(2) has no effect on the state of the row."
|
|
::= { vrrpNewCfgIfTableEntry 4 }
|
|
|
|
-- Failover Virtual Router Groups
|
|
vrrpVirtRtrGrpTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in VRRP Group table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 8 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrGrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VRRP virtual router group in current_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 9 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTableEntry OBJECT-TYPE
|
|
SYNTAX VrrpCurCfgVirtRtrGrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a VRRP failover virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { vrrpCurCfgVirtRtrGrpIndx }
|
|
::= { vrrpCurCfgVirtRtrGrpTable 1 }
|
|
|
|
VrrpCurCfgVirtRtrGrpTableEntry ::= SEQUENCE {
|
|
vrrpCurCfgVirtRtrGrpIndx Integer32,
|
|
vrrpCurCfgVirtRtrGrpID INTEGER,
|
|
vrrpCurCfgVirtRtrGrpIfIndex Integer32,
|
|
vrrpCurCfgVirtRtrGrpInterval INTEGER,
|
|
vrrpCurCfgVirtRtrGrpPriority INTEGER,
|
|
vrrpCurCfgVirtRtrGrpPreempt INTEGER,
|
|
vrrpCurCfgVirtRtrGrpState INTEGER,
|
|
vrrpCurCfgVirtRtrGrpSharing INTEGER,
|
|
vrrpCurCfgVirtRtrGrpTckVirtRtr INTEGER,
|
|
vrrpCurCfgVirtRtrGrpTckIpIntf INTEGER,
|
|
vrrpCurCfgVirtRtrGrpTckVlanPort INTEGER,
|
|
vrrpCurCfgVirtRtrGrpTckL4Port INTEGER,
|
|
vrrpCurCfgVirtRtrGrpTckRServer INTEGER,
|
|
vrrpCurCfgVirtRtrGrpTckHsrp INTEGER,
|
|
vrrpCurCfgVirtRtrGrpTckHsrv INTEGER,
|
|
vrrpCurCfgVirtRtrGrpVersion INTEGER,
|
|
vrrpCurCfgVirtRtrGrpIpv6Interval INTEGER,
|
|
vrrpCurCfgVirtRtrGrpOspfCost INTEGER,
|
|
vrrpCurCfgVirtRtrGrpTckSwExt INTEGER,
|
|
vrrpCurCfgVirtRtrGrpTckIslPort INTEGER
|
|
}
|
|
|
|
vrrpCurCfgVirtRtrGrpIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router table index."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 1 }
|
|
|
|
vrrpCurCfgVirtRtrGrpID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router identifier."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 2 }
|
|
|
|
vrrpCurCfgVirtRtrGrpIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex that the VRRP virtual router is representing."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 3 }
|
|
|
|
vrrpCurCfgVirtRtrGrpInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between VRRP advertisements in seconds."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 4 }
|
|
|
|
vrrpCurCfgVirtRtrGrpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value to be used by the specified VRRP virtual routers."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 5 }
|
|
|
|
vrrpCurCfgVirtRtrGrpPreempt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is for controlling whether a higher priority Backup
|
|
VRRP virtual router preempts a low priority Master.
|
|
|
|
enabled(1) - allow preemption
|
|
disabled(2) - prohibit preemption"
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 6 }
|
|
|
|
vrrpCurCfgVirtRtrGrpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 7 }
|
|
|
|
vrrpCurCfgVirtRtrGrpSharing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable load sharing of non-master virtual router."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 8 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTckVirtRtr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking other virtual routers for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckVirtRtrInc."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 9 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking other router interfaces for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckIpIntfInc."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 10 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking port state of VLAN ports
|
|
for priority adjustment. the priority increment is
|
|
defined in vrrpCurCfgGenTckVlanPortInc."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 11 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTckL4Port OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Layer 4 port states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckL4PortInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 12 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTckRServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking real server states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckRServerInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 13 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTckHsrp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP advertisements for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckHsrpInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 14 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTckHsrv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP by VLAN advertisements for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckHsrvInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 15 }
|
|
|
|
vrrpCurCfgVirtRtrGrpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v4(1),
|
|
v6(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router group IP Version."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 16 }
|
|
|
|
vrrpCurCfgVirtRtrGrpIpv6Interval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between IPv6 VRRP advertisements in centiseconds."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 17 }
|
|
|
|
vrrpCurCfgVirtRtrGrpOspfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Cost Adjustment"
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 18 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTckSwExt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Switch Extension availability for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpNewCfgGenTckSwExtInc."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 19 }
|
|
|
|
vrrpCurCfgVirtRtrGrpTckIslPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include(1),
|
|
exclude(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Include or exclude ISL ports in tracking."
|
|
::= { vrrpCurCfgVirtRtrGrpTableEntry 20 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrGrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VRRP virtual router group configuration in new_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 10 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTableEntry OBJECT-TYPE
|
|
SYNTAX VrrpNewCfgVirtRtrGrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a VRRP failover virtual router.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { vrrpNewCfgVirtRtrGrpIndx }
|
|
::= { vrrpNewCfgVirtRtrGrpTable 1 }
|
|
|
|
VrrpNewCfgVirtRtrGrpTableEntry ::= SEQUENCE {
|
|
vrrpNewCfgVirtRtrGrpIndx Integer32,
|
|
vrrpNewCfgVirtRtrGrpID INTEGER,
|
|
vrrpNewCfgVirtRtrGrpIfIndex Integer32,
|
|
vrrpNewCfgVirtRtrGrpInterval INTEGER,
|
|
vrrpNewCfgVirtRtrGrpPriority INTEGER,
|
|
vrrpNewCfgVirtRtrGrpPreempt INTEGER,
|
|
vrrpNewCfgVirtRtrGrpState INTEGER,
|
|
vrrpNewCfgVirtRtrGrpDelete INTEGER,
|
|
vrrpNewCfgVirtRtrGrpSharing INTEGER,
|
|
vrrpNewCfgVirtRtrGrpTckVirtRtr INTEGER,
|
|
vrrpNewCfgVirtRtrGrpTckIpIntf INTEGER,
|
|
vrrpNewCfgVirtRtrGrpTckVlanPort INTEGER,
|
|
vrrpNewCfgVirtRtrGrpTckL4Port INTEGER,
|
|
vrrpNewCfgVirtRtrGrpTckRServer INTEGER,
|
|
vrrpNewCfgVirtRtrGrpTckHsrp INTEGER,
|
|
vrrpNewCfgVirtRtrGrpTckHsrv INTEGER,
|
|
vrrpNewCfgVirtRtrGrpVersion INTEGER,
|
|
vrrpNewCfgVirtRtrGrpIpv6Interval INTEGER,
|
|
vrrpNewCfgVirtRtrGrpOspfCost INTEGER,
|
|
vrrpNewCfgVirtRtrGrpTckSwExt INTEGER,
|
|
vrrpNewCfgVirtRtrGrpTckIslPort INTEGER
|
|
}
|
|
|
|
vrrpNewCfgVirtRtrGrpIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router table index."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 1 }
|
|
|
|
vrrpNewCfgVirtRtrGrpID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router identifier."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 2 }
|
|
|
|
vrrpNewCfgVirtRtrGrpIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex that the VRRP virtual router is representing."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 3 }
|
|
|
|
vrrpNewCfgVirtRtrGrpInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between VRRP advertisements in seconds."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 4 }
|
|
|
|
vrrpNewCfgVirtRtrGrpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..254)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value to be used by the specified VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 5 }
|
|
|
|
vrrpNewCfgVirtRtrGrpPreempt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is for controlling whether a higher priority Backup
|
|
VRRP virtual router preempts a low priority Master.
|
|
|
|
enabled(1) - allow preemption
|
|
disabled(2) - prohibit preemption"
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 6 }
|
|
|
|
vrrpNewCfgVirtRtrGrpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 7 }
|
|
|
|
vrrpNewCfgVirtRtrGrpDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than delete(2) has no effect on the state of the row."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 8 }
|
|
|
|
vrrpNewCfgVirtRtrGrpSharing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable load sharing of non-master virtual router."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 9 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTckVirtRtr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking other virtual routers for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckVirtRtrInc."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 10 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking other router interfaces for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckIpIntfInc."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 11 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking port state of VLAN ports
|
|
for priority adjustment. the priority increment is
|
|
defined in vrrpNewCfgGenTckVlanPortInc."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 12 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTckL4Port OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Layer 4 port states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckL4PortInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 13 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTckRServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking real server states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckRServerInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 14 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTckHsrp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP advertisements for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpNewCfgGenTckHsrpInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 15 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTckHsrv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP by VLAN advertisements for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpNewCfgGenTckHsrvInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 16 }
|
|
|
|
vrrpNewCfgVirtRtrGrpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v4(1),
|
|
v6(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router group IP Version."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 17 }
|
|
|
|
vrrpNewCfgVirtRtrGrpIpv6Interval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between IPv6 VRRP advertisements in centiseconds."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 18 }
|
|
|
|
vrrpNewCfgVirtRtrGrpOspfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Cost Adjustment"
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 19 }
|
|
|
|
vrrpNewCfgVirtRtrGrpTckSwExt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Switch Extension availability for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpNewCfgGenTckSwExtInc."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 20 }
|
|
vrrpNewCfgVirtRtrGrpTckIslPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include(1),
|
|
exclude(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Include or exclude ISL ports in tracking."
|
|
::= { vrrpNewCfgVirtRtrGrpTableEntry 21 }
|
|
|
|
vrrpVirtRtrVrGrpTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in VRRP VrGroup table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 11 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrVrGrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VRRP virtual router vrgroup configuration in
|
|
the current config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 12 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTableEntry OBJECT-TYPE
|
|
SYNTAX VrrpCurCfgVirtRtrVrGrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about setting VRRP virtual router vrgroup.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { vrrpCurCfgVirtRtrVrGrpIndx }
|
|
::= { vrrpCurCfgVirtRtrVrGrpTable 1 }
|
|
|
|
VrrpCurCfgVirtRtrVrGrpTableEntry ::= SEQUENCE {
|
|
vrrpCurCfgVirtRtrVrGrpIndx Integer32,
|
|
vrrpCurCfgVirtRtrVrGrpName DisplayString,
|
|
vrrpCurCfgVirtRtrVrGrpState INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpBmap OCTET STRING,
|
|
vrrpCurCfgVirtRtrVrGrpPriority INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpTckIpIntf INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpTckVlanPort INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpTckL4Port INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpTckRServer INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpTckHsrp INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpTckHsrv INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpTckVirtRtrNo INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpAdd INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpAdverInterval INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpPreemption INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpSharing INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpOspfCost INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpTckSwExt INTEGER,
|
|
vrrpCurCfgVirtRtrVrGrpTckIslPort INTEGER
|
|
}
|
|
|
|
vrrpCurCfgVirtRtrVrGrpIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router vrgroup table index."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 1 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router vrgroup name."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 2 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable VRRP Vrgroup state "
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 3 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpBmap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The virtual routers added for to this VRRP vrgroup.
|
|
The selected virtual routers are presented in a bitmap format.
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Virtual Router 9
|
|
|| ||
|
|
|| ||___ Virtual Router 8
|
|
|| |____ Virtual Router 7
|
|
|| . . .
|
|
||_________ Virtual Router 2
|
|
|__________ Virtual Router 1
|
|
|
|
where x : 1 - The represented Virtual Router is added
|
|
0 - The represented Virtual Router is not added"
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 4 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value to be used by the specified VRRP virtual routers."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 5 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTckIpIntf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking interfaces in vrgroup for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckIpIntfInc."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 6 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTckVlanPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking port state of VLAN ports
|
|
for priority adjustment. The priority increment is
|
|
defined in vrrpCurCfgGenTckVlanPortInc."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 7 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTckL4Port OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Layer 4 port states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckL4PortInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 8 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTckRServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking real server states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckRServerInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 9 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTckHsrp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP advertisements for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckHsrpInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 10 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTckHsrv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP advertisements by VLAN for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckHsrvInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 11 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTckVirtRtrNo OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1024)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The track virtual router for group."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 12 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpAdd OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1024)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify virtual router number which needs to be added to group."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 13 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpAdverInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertisement interval for virtual router group."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 14 }
|
|
|
|
|
|
vrrpCurCfgVirtRtrVrGrpPreemption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable preemption for virtual router group."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 15 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpSharing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable sharing for virtual router group."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 16 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpOspfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Cost Adjustment"
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 17 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTckSwExt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Switch Extension availability for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckSwExtInc."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 18 }
|
|
|
|
vrrpCurCfgVirtRtrVrGrpTckIslPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include(1),
|
|
exclude(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Include or exclude ISL ports in tracking."
|
|
::= { vrrpCurCfgVirtRtrVrGrpTableEntry 19 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrVrGrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VRRP virtual router vrgroup configuration in new_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { vrrpCfg 13 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTableEntry OBJECT-TYPE
|
|
SYNTAX VrrpNewCfgVirtRtrVrGrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about setting VRRP virtual router Vrgroup.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { vrrpNewCfgVirtRtrVrGrpIndx }
|
|
::= { vrrpNewCfgVirtRtrVrGrpTable 1 }
|
|
|
|
VrrpNewCfgVirtRtrVrGrpTableEntry ::= SEQUENCE {
|
|
vrrpNewCfgVirtRtrVrGrpIndx Integer32,
|
|
vrrpNewCfgVirtRtrVrGrpName DisplayString,
|
|
vrrpNewCfgVirtRtrVrGrpAdd INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpRem INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpState INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpDelete INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpBmap OCTET STRING,
|
|
vrrpNewCfgVirtRtrVrGrpPriority INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpTckIpIntf INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpTckVlanPort INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpTckL4Port INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpTckRServer INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpTckHsrp INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpTckHsrv INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpTckVirtRtrNo INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpAdverInterval INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpPreemption INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpSharing INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpOspfCost INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpTckSwExt INTEGER,
|
|
vrrpNewCfgVirtRtrVrGrpTckIslPort INTEGER
|
|
}
|
|
|
|
vrrpNewCfgVirtRtrVrGrpIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router vrgroup table index."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 1 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router vrgroup name."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 2 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpAdd OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router to be added to this vrgroup table."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 3 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpRem OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router to be removed from this vrgroup table."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 4 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable VRRP Vrgroup state "
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 5 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 6 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpBmap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The virtual routers added to this VRRP vrgroup.
|
|
The selected virtual routers are presented in a bitmap format.
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Virtual Router 9
|
|
|| ||
|
|
|| ||___ Virtual Router 8
|
|
|| |____ Virtual Router 7
|
|
|| . . .
|
|
||_________ Virtual Router 2
|
|
|__________ Virtual Router 1
|
|
|
|
where x : 1 - The represented Virtual Router is added
|
|
0 - The represented Virtual Router is not added"
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 7 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..254)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value to be used by the specified VRRP virtual routers."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 8 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTckIpIntf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking interfaces in vrgroup for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckIpIntfInc."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 9 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTckVlanPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking port state of VLAN ports
|
|
for priority adjustment. The priority increment is
|
|
defined in vrrpCurCfgGenTckVlanPortInc."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 10 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTckL4Port OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Layer 4 port states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckL4PortInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 11 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTckRServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking real server states for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckRServerInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 12 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTckHsrp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP advertisements for
|
|
priority adjustment. the priority increment is defined
|
|
in vrrpCurCfgGenTckHsrpInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 13 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTckHsrv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking HSRP advertisements by VLAN for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckHsrvInc. This is applied when
|
|
virtual server is configured as a VRRP virtual router."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 14 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTckVirtRtrNo OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1024)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The track virtual router for group."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 15 }
|
|
|
|
|
|
vrrpNewCfgVirtRtrVrGrpAdverInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertisement interval for virtual router group."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 16 }
|
|
|
|
|
|
vrrpNewCfgVirtRtrVrGrpPreemption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable preemption for virtual router group."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 17 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpSharing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable sharing for virtual router group."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 18 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpOspfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65536)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF Cost Adjustment"
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 19 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTckSwExt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking Switch Extension availability for
|
|
priority adjustment. The priority increment is defined
|
|
in vrrpCurCfgGenTckSwExtInc."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 20 }
|
|
|
|
vrrpNewCfgVirtRtrVrGrpTckIslPort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include(1),
|
|
exclude(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Include or exclude ISL ports in tracking."
|
|
::= { vrrpNewCfgVirtRtrVrGrpTableEntry 21 }
|
|
|
|
-- Domain Name Server Configuration
|
|
|
|
dnsCurCfgPrimaryIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS primary IP address in the current_configuration block."
|
|
::= { dnsCfg 1 }
|
|
|
|
dnsNewCfgPrimaryIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS primary IP address in the new_configuration block."
|
|
::= { dnsCfg 2 }
|
|
|
|
dnsCurCfgSecondaryIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS secondary IP address in the current_configuration block."
|
|
::= { dnsCfg 3 }
|
|
|
|
dnsNewCfgSecondaryIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS secondary IP address in the new_configuration block."
|
|
::= { dnsCfg 4 }
|
|
|
|
dnsCurCfgDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..191))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS doamin name in the current_configuration block."
|
|
::= { dnsCfg 5 }
|
|
|
|
dnsNewCfgDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..191))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS doamin name in the new_configuration block."
|
|
::= { dnsCfg 6 }
|
|
|
|
dnsCurCfgPrimaryIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS primary IPv6 address in the current_configuration block."
|
|
::= { dnsCfg 7 }
|
|
|
|
dnsNewCfgPrimaryIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS primary IPv6 address in the new_configuration block."
|
|
::= { dnsCfg 8 }
|
|
|
|
dnsCurCfgSecondaryIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS secondary IPv6 address in the current_configuration block."
|
|
::= { dnsCfg 9 }
|
|
|
|
dnsNewCfgSecondaryIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DNS secondary IPv6 address in the new_configuration block."
|
|
::= { dnsCfg 10 }
|
|
|
|
--
|
|
-- IP network filter configuration
|
|
--
|
|
ipNwfTableMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the IP network filter table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipNwfCfg 1 }
|
|
|
|
ipCurCfgNwfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpCurCfgNwfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP network filter configuration in the current_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipNwfCfg 2 }
|
|
|
|
ipCurCfgNwfEntry OBJECT-TYPE
|
|
SYNTAX IpCurCfgNwfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an IP network filter.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipCurCfgNwfIndex }
|
|
::= { ipCurCfgNwfTable 1 }
|
|
|
|
IpCurCfgNwfEntry ::= SEQUENCE {
|
|
ipCurCfgNwfIndex Integer32,
|
|
ipCurCfgNwfAddr IpAddress,
|
|
ipCurCfgNwfMask IpAddress,
|
|
ipCurCfgNwfState INTEGER,
|
|
ipCurCfgNwfIpVer INTEGER,
|
|
ipCurCfgNwfIpv6Addr DisplayString,
|
|
ipCurCfgNwfIpv6Mask INTEGER
|
|
}
|
|
|
|
ipCurCfgNwfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network filter number for which the NWF is related."
|
|
::= { ipCurCfgNwfEntry 1}
|
|
|
|
ipCurCfgNwfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the network filter."
|
|
::= { ipCurCfgNwfEntry 2 }
|
|
|
|
ipCurCfgNwfMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of the network filter."
|
|
::= { ipCurCfgNwfEntry 3 }
|
|
|
|
ipCurCfgNwfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the network filter."
|
|
::= { ipCurCfgNwfEntry 4 }
|
|
|
|
ipCurCfgNwfIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v4(0),
|
|
v6(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address Version"
|
|
::= { ipCurCfgNwfEntry 5 }
|
|
|
|
ipCurCfgNwfIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the network filter."
|
|
::= { ipCurCfgNwfEntry 6 }
|
|
|
|
ipCurCfgNwfIpv6Mask OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 prefix mask of the network filter.."
|
|
::= { ipCurCfgNwfEntry 7 }
|
|
|
|
ipNewCfgNwfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNewCfgNwfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP network filter configuration in the current_config.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipNwfCfg 3 }
|
|
|
|
ipNewCfgNwfEntry OBJECT-TYPE
|
|
SYNTAX IpNewCfgNwfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an IP network filter.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
INDEX { ipNewCfgNwfIndex }
|
|
::= { ipNewCfgNwfTable 1 }
|
|
|
|
IpNewCfgNwfEntry ::= SEQUENCE {
|
|
ipNewCfgNwfIndex Integer32,
|
|
ipNewCfgNwfAddr IpAddress,
|
|
ipNewCfgNwfMask IpAddress,
|
|
ipNewCfgNwfState INTEGER,
|
|
ipNewCfgNwfDelete INTEGER,
|
|
ipNewCfgNwfIpVer INTEGER,
|
|
ipNewCfgNwfIpv6Addr DisplayString,
|
|
ipNewCfgNwfIpv6Mask INTEGER
|
|
}
|
|
|
|
ipNewCfgNwfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network filter number for which the NWF is related."
|
|
::= { ipNewCfgNwfEntry 1}
|
|
|
|
ipNewCfgNwfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the network filter."
|
|
::= { ipNewCfgNwfEntry 2 }
|
|
|
|
ipNewCfgNwfMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of the network filter."
|
|
::= { ipNewCfgNwfEntry 3 }
|
|
|
|
ipNewCfgNwfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the network filter."
|
|
::= { ipNewCfgNwfEntry 4 }
|
|
|
|
ipNewCfgNwfDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ipNewCfgNwfEntry 5 }
|
|
|
|
ipNewCfgNwfIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v4(0),
|
|
v6(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address Version"
|
|
::= { ipNewCfgNwfEntry 6 }
|
|
|
|
ipNewCfgNwfIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the network filter."
|
|
::= { ipNewCfgNwfEntry 7 }
|
|
|
|
ipNewCfgNwfIpv6Mask OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 prefix mask of the network filter.."
|
|
::= { ipNewCfgNwfEntry 8 }
|
|
|
|
--
|
|
-- IP route map configuration
|
|
--
|
|
ipRmapTableMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the IP route map table.
|
|
Note:This mib is not supported for VX instance of Virtualization."
|
|
::= { ipRmapCfg 1 }
|
|
|
|
ipCurCfgRmapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpCurCfgRmapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP route map configuration in the current_config."
|
|
::= { ipRmapCfg 2 }
|
|
|
|
ipCurCfgRmapEntry OBJECT-TYPE
|
|
SYNTAX IpCurCfgRmapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an IP route map."
|
|
INDEX { ipCurCfgRmapIndex }
|
|
::= { ipCurCfgRmapTable 1 }
|
|
|
|
IpCurCfgRmapEntry ::= SEQUENCE {
|
|
ipCurCfgRmapIndex Integer32,
|
|
ipCurCfgRmapLp Unsigned32,
|
|
ipCurCfgRmapMetric Unsigned32,
|
|
ipCurCfgRmapPrec INTEGER,
|
|
ipCurCfgRmapWeight INTEGER,
|
|
ipCurCfgRmapState INTEGER,
|
|
ipCurCfgRmapMetricType INTEGER,
|
|
ipCurCfgRmapAp DisplayString
|
|
}
|
|
|
|
ipCurCfgRmapIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map number for which the RMAP is related."
|
|
::= { ipCurCfgRmapEntry 1}
|
|
|
|
ipCurCfgRmapLp OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local-preference of the route map. 4294967295 means none"
|
|
::= { ipCurCfgRmapEntry 2 }
|
|
|
|
ipCurCfgRmapMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of the route map. 4294967295 means none"
|
|
::= { ipCurCfgRmapEntry 3 }
|
|
|
|
ipCurCfgRmapPrec OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The precedence of the route map."
|
|
::= { ipCurCfgRmapEntry 4 }
|
|
|
|
ipCurCfgRmapWeight OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The weight of the route map. 65535 means none"
|
|
::= { ipCurCfgRmapEntry 5 }
|
|
|
|
ipCurCfgRmapState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the route map."
|
|
::= { ipCurCfgRmapEntry 6 }
|
|
|
|
ipCurCfgRmapAp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..18))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The as-path prepend of the matched route. Up to 3 AS number can be
|
|
displayed for the string.
|
|
The usuage is:<AS number> [<AS number>][ <AS number>]"
|
|
::= { ipCurCfgRmapEntry 7 }
|
|
|
|
ipCurCfgRmapMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF metric-type of the matched route."
|
|
::= { ipCurCfgRmapEntry 8 }
|
|
|
|
ipNewCfgRmapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNewCfgRmapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP route map configuration in the current_config."
|
|
::= { ipRmapCfg 3 }
|
|
|
|
ipNewCfgRmapEntry OBJECT-TYPE
|
|
SYNTAX IpNewCfgRmapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an IP route map."
|
|
INDEX { ipNewCfgRmapIndex }
|
|
::= { ipNewCfgRmapTable 1 }
|
|
|
|
IpNewCfgRmapEntry ::= SEQUENCE {
|
|
ipNewCfgRmapIndex Integer32,
|
|
ipNewCfgRmapLp Unsigned32,
|
|
ipNewCfgRmapMetric Unsigned32,
|
|
ipNewCfgRmapPrec INTEGER,
|
|
ipNewCfgRmapWeight INTEGER,
|
|
ipNewCfgRmapState INTEGER,
|
|
ipNewCfgRmapAp DisplayString,
|
|
ipNewCfgRmapMetricType INTEGER,
|
|
ipNewCfgRmapDelete INTEGER
|
|
}
|
|
|
|
ipNewCfgRmapIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map number for which the RMAP is related."
|
|
::= { ipNewCfgRmapEntry 1}
|
|
|
|
ipNewCfgRmapLp OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local-preference of the route map. 4294967295 means none"
|
|
::= { ipNewCfgRmapEntry 2 }
|
|
|
|
ipNewCfgRmapMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of the route map. 4294967295 means none"
|
|
::= { ipNewCfgRmapEntry 3 }
|
|
|
|
ipNewCfgRmapPrec OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The precedence of the route map."
|
|
::= { ipNewCfgRmapEntry 4 }
|
|
|
|
ipNewCfgRmapWeight OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The weight of the route map. 65535 means none"
|
|
::= { ipNewCfgRmapEntry 5 }
|
|
|
|
ipNewCfgRmapState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the route map."
|
|
::= { ipNewCfgRmapEntry 6 }
|
|
|
|
ipNewCfgRmapAp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The as-path prepend of the matched route. Up to 3 AS number can be
|
|
displayed for the string.
|
|
The usuage is:<AS number> [<AS number>][ <AS number>]"
|
|
::= { ipNewCfgRmapEntry 7 }
|
|
|
|
ipNewCfgRmapMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF metric-type of the matched route."
|
|
::= { ipNewCfgRmapEntry 8 }
|
|
|
|
ipNewCfgRmapDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ipNewCfgRmapEntry 9 }
|
|
|
|
ipAlistTableMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the IP route map table."
|
|
::= { ipRmapCfg 4 }
|
|
|
|
ipCurCfgAlistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpCurCfgAlistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP route map access list configuration in the
|
|
current_config."
|
|
::= { ipRmapCfg 5 }
|
|
|
|
ipCurCfgAlistEntry OBJECT-TYPE
|
|
SYNTAX IpCurCfgAlistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an IP route map."
|
|
INDEX { ipCurCfgAlistRmapIndex, ipCurCfgAlistIndex }
|
|
::= { ipCurCfgAlistTable 1 }
|
|
|
|
IpCurCfgAlistEntry ::= SEQUENCE {
|
|
ipCurCfgAlistRmapIndex Integer32,
|
|
ipCurCfgAlistIndex Integer32,
|
|
ipCurCfgAlistNwf INTEGER,
|
|
ipCurCfgAlistMetric Unsigned32,
|
|
ipCurCfgAlistAction INTEGER,
|
|
ipCurCfgAlistState INTEGER,
|
|
ipCurCfgAlistNwc DisplayString
|
|
}
|
|
|
|
ipCurCfgAlistRmapIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map number for which the RMAP is related."
|
|
::= { ipCurCfgAlistEntry 1 }
|
|
|
|
ipCurCfgAlistIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access list number for which the access list is related."
|
|
::= { ipCurCfgAlistEntry 2 }
|
|
|
|
ipCurCfgAlistNwf OBJECT-TYPE
|
|
SYNTAX INTEGER (0..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network filter number of the route map access list.
|
|
0 means none"
|
|
::= { ipCurCfgAlistEntry 3 }
|
|
|
|
ipCurCfgAlistMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of the route map access list. 4294967295 means none"
|
|
::= { ipCurCfgAlistEntry 4 }
|
|
|
|
ipCurCfgAlistAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action of the route map access list."
|
|
::= { ipCurCfgAlistEntry 5 }
|
|
|
|
ipCurCfgAlistState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the route map access list."
|
|
::= { ipCurCfgAlistEntry 6 }
|
|
|
|
ipCurCfgAlistNwc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network classifier of the route map access list.
|
|
'none' means no network class configured."
|
|
::= { ipCurCfgAlistEntry 7 }
|
|
|
|
ipNewCfgAlistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNewCfgAlistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP route map access list configuration in the
|
|
current_config."
|
|
::= { ipRmapCfg 6 }
|
|
|
|
ipNewCfgAlistEntry OBJECT-TYPE
|
|
SYNTAX IpNewCfgAlistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an IP route map."
|
|
INDEX { ipNewCfgAlistRmapIndex, ipNewCfgAlistIndex }
|
|
::= { ipNewCfgAlistTable 1 }
|
|
|
|
IpNewCfgAlistEntry ::= SEQUENCE {
|
|
ipNewCfgAlistRmapIndex Integer32,
|
|
ipNewCfgAlistIndex Integer32,
|
|
ipNewCfgAlistNwf INTEGER,
|
|
ipNewCfgAlistMetric Unsigned32,
|
|
ipNewCfgAlistAction INTEGER,
|
|
ipNewCfgAlistState INTEGER,
|
|
ipNewCfgAlistDelete INTEGER,
|
|
ipNewCfgAlistNwc DisplayString,
|
|
ipNewCfgAlistNwType INTEGER
|
|
}
|
|
|
|
ipNewCfgAlistRmapIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map number for which the RMAP is related."
|
|
::= { ipNewCfgAlistEntry 1 }
|
|
|
|
ipNewCfgAlistIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access list number for which the access list is related."
|
|
::= { ipNewCfgAlistEntry 2 }
|
|
|
|
ipNewCfgAlistNwf OBJECT-TYPE
|
|
SYNTAX INTEGER (0..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network filter number of the route map access list.
|
|
0 means none"
|
|
::= { ipNewCfgAlistEntry 3 }
|
|
|
|
ipNewCfgAlistMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric of the route map access list. 4294967295 means none"
|
|
::= { ipNewCfgAlistEntry 4 }
|
|
|
|
ipNewCfgAlistAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action of the route map access list."
|
|
::= { ipNewCfgAlistEntry 5 }
|
|
|
|
ipNewCfgAlistState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the route map access list."
|
|
::= { ipNewCfgAlistEntry 6 }
|
|
|
|
ipNewCfgAlistDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ipNewCfgAlistEntry 7 }
|
|
|
|
ipNewCfgAlistNwc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network classifier of the route map access list.
|
|
'none' means no network class configured."
|
|
::= { ipNewCfgAlistEntry 8 }
|
|
|
|
ipNewCfgAlistNwType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
network-filter(1),
|
|
network-class(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is the alist configured to network filter type or network class type."
|
|
::= { ipNewCfgAlistEntry 9 }
|
|
|
|
ipAspathTableMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the IP route map table."
|
|
::= { ipRmapCfg 7 }
|
|
|
|
ipCurCfgAspathTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpCurCfgAspathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP route map access path configuration."
|
|
::= { ipRmapCfg 8 }
|
|
|
|
ipCurCfgAspathEntry OBJECT-TYPE
|
|
SYNTAX IpCurCfgAspathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an IP route map."
|
|
INDEX { ipCurCfgAspathRmapIndex, ipCurCfgAlistIndex }
|
|
::= { ipCurCfgAspathTable 1 }
|
|
|
|
IpCurCfgAspathEntry ::= SEQUENCE {
|
|
ipCurCfgAspathRmapIndex Integer32,
|
|
ipCurCfgAspathIndex Integer32,
|
|
ipCurCfgAspathAS INTEGER,
|
|
ipCurCfgAspathAction INTEGER,
|
|
ipCurCfgAspathState INTEGER
|
|
}
|
|
|
|
ipCurCfgAspathRmapIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map number for which the RMAP is related."
|
|
::= { ipCurCfgAspathEntry 1 }
|
|
|
|
ipCurCfgAspathIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access path number for which the access list is related."
|
|
::= { ipCurCfgAspathEntry 2 }
|
|
|
|
ipCurCfgAspathAS OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS number of the route map access path.
|
|
0 means none"
|
|
::= { ipCurCfgAspathEntry 3 }
|
|
|
|
ipCurCfgAspathAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action of the route map access path."
|
|
::= { ipCurCfgAspathEntry 4 }
|
|
|
|
ipCurCfgAspathState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the route map access path."
|
|
::= { ipCurCfgAspathEntry 5 }
|
|
|
|
ipNewCfgAspathTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNewCfgAspathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP route map access path configuration"
|
|
::= { ipRmapCfg 9 }
|
|
|
|
ipNewCfgAspathEntry OBJECT-TYPE
|
|
SYNTAX IpNewCfgAspathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an IP route map."
|
|
INDEX { ipNewCfgAspathRmapIndex, ipNewCfgAspathIndex }
|
|
::= { ipNewCfgAspathTable 1 }
|
|
|
|
IpNewCfgAspathEntry ::= SEQUENCE {
|
|
ipNewCfgAspathRmapIndex Integer32,
|
|
ipNewCfgAspathIndex Integer32,
|
|
ipNewCfgAspathAS Unsigned32,
|
|
ipNewCfgAspathAction INTEGER,
|
|
ipNewCfgAspathState INTEGER,
|
|
ipNewCfgAspathDelete INTEGER
|
|
}
|
|
|
|
ipNewCfgAspathRmapIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map number for which the RMAP is related."
|
|
::= { ipNewCfgAspathEntry 1 }
|
|
|
|
ipNewCfgAspathIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access path number for which the access list is related."
|
|
::= { ipNewCfgAspathEntry 2 }
|
|
|
|
ipNewCfgAspathAS OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS number of the route map access path.
|
|
0 means none"
|
|
::= { ipNewCfgAspathEntry 3 }
|
|
|
|
ipNewCfgAspathAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action of the route map access path."
|
|
::= { ipNewCfgAspathEntry 4 }
|
|
|
|
ipNewCfgAspathState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the route map access path."
|
|
::= { ipNewCfgAspathEntry 5 }
|
|
|
|
ipNewCfgAspathDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ipNewCfgAspathEntry 6 }
|
|
|
|
--
|
|
-- IP BGP configuration
|
|
--
|
|
bgpGeneral OBJECT IDENTIFIER ::= { bgpCfg 1 }
|
|
|
|
bgpCurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BGP global state."
|
|
::= { bgpGeneral 1 }
|
|
|
|
bgpNewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Globally turn BGP on or off."
|
|
::= { bgpGeneral 2 }
|
|
|
|
bgpCurCfgLocalPref OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local preference value."
|
|
::= { bgpGeneral 3 }
|
|
|
|
bgpNewCfgLocalPref OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local Preference value."
|
|
::= { bgpGeneral 4 }
|
|
|
|
bgpCurCfgMaxASPath OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum AS Path Length."
|
|
::= { bgpGeneral 5 }
|
|
|
|
bgpNewCfgMaxASPath OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum AS Path Length."
|
|
::= { bgpGeneral 6 }
|
|
|
|
bgpCurCfgASNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current autonomous system number."
|
|
::= { bgpGeneral 7 }
|
|
|
|
bgpNewCfgASNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"New autonomous system number.Enter 0 to delete this number."
|
|
::= { bgpGeneral 8 }
|
|
|
|
bgpCurCfgStopVipAdv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stop VIP advertisement."
|
|
::= { bgpGeneral 9 }
|
|
|
|
bgpNewCfgStopVipAdv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stop VIP advertisement."
|
|
::= { bgpGeneral 10 }
|
|
|
|
bgpCurCfgAdvFip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertise floating IP state."
|
|
::= { bgpGeneral 11 }
|
|
|
|
bgpNewCfgAdvFip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertising floating IP : on or off."
|
|
::= { bgpGeneral 12 }
|
|
|
|
bgpPeerTableMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the BGP peer table."
|
|
::= { bgpCfg 2 }
|
|
|
|
bgpCurCfgPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BgpCurCfgPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of BGP peer configuration in the current_config."
|
|
::= { bgpCfg 3 }
|
|
|
|
bgpCurCfgPeerEntry OBJECT-TYPE
|
|
SYNTAX BgpCurCfgPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a BGP peer."
|
|
INDEX { bgpCurCfgPeerIndex }
|
|
::= { bgpCurCfgPeerTable 1 }
|
|
|
|
BgpCurCfgPeerEntry ::= SEQUENCE {
|
|
bgpCurCfgPeerIndex Integer32,
|
|
bgpCurCfgPeerRemoteAddr IpAddress,
|
|
bgpCurCfgPeerRemoteAs INTEGER,
|
|
bgpCurCfgPeerTtl INTEGER,
|
|
bgpCurCfgPeerState INTEGER,
|
|
bgpCurCfgPeerMetric Unsigned32,
|
|
bgpCurCfgPeerDefaultAction INTEGER,
|
|
bgpCurCfgPeerOspfState INTEGER,
|
|
bgpCurCfgPeerFixedState INTEGER,
|
|
bgpCurCfgPeerStaticState INTEGER,
|
|
bgpCurCfgPeerVipState INTEGER,
|
|
bgpCurCfgPeerInRmapList OCTET STRING,
|
|
bgpCurCfgPeerOutRmapList OCTET STRING,
|
|
bgpCurCfgPeerHoldTime INTEGER,
|
|
bgpCurCfgPeerKeepAlive INTEGER,
|
|
bgpCurCfgPeerMinTime INTEGER,
|
|
bgpCurCfgPeerConRetry INTEGER,
|
|
bgpCurCfgPeerMinAS INTEGER,
|
|
bgpCurCfgPeerRipState INTEGER,
|
|
bgpCurCfgPeerDenyState INTEGER,
|
|
bgpCurCfgPeerNextHop IpAddress,
|
|
bgpCurCfgPeerBfdState INTEGER
|
|
}
|
|
|
|
bgpCurCfgPeerIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGP peer number for which the BGP peer table is related."
|
|
::= { bgpCurCfgPeerEntry 1 }
|
|
|
|
bgpCurCfgPeerRemoteAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote IP address of the BGP peer."
|
|
::= { bgpCurCfgPeerEntry 2 }
|
|
|
|
bgpCurCfgPeerRemoteAs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote AS number of the BGP peer. 0 means none"
|
|
::= { bgpCurCfgPeerEntry 3 }
|
|
|
|
bgpCurCfgPeerTtl OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value of the BGP peer IP datagram. "
|
|
::= { bgpCurCfgPeerEntry 4 }
|
|
|
|
bgpCurCfgPeerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the peer."
|
|
::= { bgpCurCfgPeerEntry 5 }
|
|
|
|
bgpCurCfgPeerMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value of the BGP peer. A value of '0' means none"
|
|
::= { bgpCurCfgPeerEntry 10 }
|
|
|
|
bgpCurCfgPeerDefaultAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
import(2),
|
|
originate(3),
|
|
redistribute(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of default route action."
|
|
::= { bgpCurCfgPeerEntry 11 }
|
|
|
|
bgpCurCfgPeerOspfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable advertising OSPF routes."
|
|
::= { bgpCurCfgPeerEntry 12 }
|
|
|
|
bgpCurCfgPeerFixedState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable advertising fixed routes."
|
|
::= { bgpCurCfgPeerEntry 13 }
|
|
|
|
bgpCurCfgPeerStaticState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable advertising static routes."
|
|
::= { bgpCurCfgPeerEntry 14 }
|
|
|
|
bgpCurCfgPeerVipState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable VIP static routes."
|
|
::= { bgpCurCfgPeerEntry 15 }
|
|
|
|
bgpCurCfgPeerInRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the in route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { bgpCurCfgPeerEntry 16 }
|
|
|
|
bgpCurCfgPeerOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { bgpCurCfgPeerEntry 17 }
|
|
|
|
bgpCurCfgPeerHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Hold Time value of the BGP peer IP datagram. "
|
|
::= { bgpCurCfgPeerEntry 18 }
|
|
|
|
bgpCurCfgPeerKeepAlive OBJECT-TYPE
|
|
SYNTAX INTEGER (1..21845)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The KeepAlive Time value of the BGP peer IP datagram. "
|
|
::= { bgpCurCfgPeerEntry 19 }
|
|
|
|
bgpCurCfgPeerMinTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min time between advertisements of the BGP peer IP datagram. "
|
|
::= { bgpCurCfgPeerEntry 20 }
|
|
|
|
|
|
bgpCurCfgPeerConRetry OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Connect Retry Timer Interval value of the BGP peer IP datagram. "
|
|
::= { bgpCurCfgPeerEntry 21 }
|
|
|
|
bgpCurCfgPeerMinAS OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time between route originations of the BGP peer IP datagram."
|
|
::= { bgpCurCfgPeerEntry 22 }
|
|
|
|
bgpCurCfgPeerRipState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable RIP static routes."
|
|
::= { bgpCurCfgPeerEntry 23 }
|
|
|
|
bgpCurCfgPeerDenyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable DENY route advertisement."
|
|
::= { bgpCurCfgPeerEntry 24 }
|
|
|
|
bgpCurCfgPeerNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value will be used by BGP peer as nexthop. "
|
|
::= { bgpCurCfgPeerEntry 25 }
|
|
|
|
bgpCurCfgPeerBfdState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turn BFD on/off for the peer."
|
|
::= { bgpCurCfgPeerEntry 26 }
|
|
|
|
bgpNewCfgPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BgpNewCfgPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of BGP peer configuration in the current_config."
|
|
::= { bgpCfg 4 }
|
|
|
|
bgpNewCfgPeerEntry OBJECT-TYPE
|
|
SYNTAX BgpNewCfgPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a BGP peer."
|
|
INDEX { bgpNewCfgPeerIndex }
|
|
::= { bgpNewCfgPeerTable 1 }
|
|
|
|
BgpNewCfgPeerEntry ::= SEQUENCE {
|
|
bgpNewCfgPeerIndex Integer32,
|
|
bgpNewCfgPeerRemoteAddr IpAddress,
|
|
bgpNewCfgPeerRemoteAs Unsigned32,
|
|
bgpNewCfgPeerTtl INTEGER,
|
|
bgpNewCfgPeerState INTEGER,
|
|
bgpNewCfgPeerDelete INTEGER,
|
|
bgpNewCfgPeerMetric Unsigned32,
|
|
bgpNewCfgPeerDefaultAction INTEGER,
|
|
bgpNewCfgPeerOspfState INTEGER,
|
|
bgpNewCfgPeerFixedState INTEGER,
|
|
bgpNewCfgPeerStaticState INTEGER,
|
|
bgpNewCfgPeerVipState INTEGER,
|
|
bgpNewCfgPeerInRmapList OCTET STRING,
|
|
bgpNewCfgPeerOutRmapList OCTET STRING,
|
|
bgpNewCfgPeerAddInRmap Integer32,
|
|
bgpNewCfgPeerAddOutRmap Integer32,
|
|
bgpNewCfgPeerRemoveInRmap Integer32,
|
|
bgpNewCfgPeerRemoveOutRmap Integer32,
|
|
bgpNewCfgPeerHoldTime INTEGER,
|
|
bgpNewCfgPeerKeepAlive INTEGER,
|
|
bgpNewCfgPeerMinTime INTEGER,
|
|
bgpNewCfgPeerConRetry INTEGER,
|
|
bgpNewCfgPeerMinAS INTEGER,
|
|
bgpNewCfgPeerRipState INTEGER,
|
|
bgpNewCfgPeerDenyState INTEGER,
|
|
bgpNewCfgPeerNextHop IpAddress,
|
|
bgpNewCfgPeerBfdState INTEGER
|
|
}
|
|
|
|
bgpNewCfgPeerIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGP peer number for which the BGP peer table is related."
|
|
::= { bgpNewCfgPeerEntry 1}
|
|
|
|
bgpNewCfgPeerRemoteAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote IP address of the BGP peer."
|
|
::= { bgpNewCfgPeerEntry 2 }
|
|
|
|
bgpNewCfgPeerRemoteAs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote AS number of the BGP peer. 0 means none"
|
|
::= { bgpNewCfgPeerEntry 3 }
|
|
|
|
bgpNewCfgPeerTtl OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value of the BGP peer IP datagram. "
|
|
::= { bgpNewCfgPeerEntry 4 }
|
|
|
|
bgpNewCfgPeerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the peer."
|
|
::= { bgpNewCfgPeerEntry 5 }
|
|
|
|
bgpNewCfgPeerDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { bgpNewCfgPeerEntry 6 }
|
|
|
|
bgpNewCfgPeerMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value of the BGP peer. A value of '0' means none"
|
|
::= { bgpNewCfgPeerEntry 10 }
|
|
|
|
bgpNewCfgPeerDefaultAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
import(2),
|
|
originate(3),
|
|
redistribute(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of default route action."
|
|
::= { bgpNewCfgPeerEntry 11 }
|
|
|
|
bgpNewCfgPeerOspfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable advertising OSPF routes."
|
|
::= { bgpNewCfgPeerEntry 12 }
|
|
|
|
bgpNewCfgPeerFixedState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable advertising fixed routes."
|
|
::= { bgpNewCfgPeerEntry 13 }
|
|
|
|
bgpNewCfgPeerStaticState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable advertising static routes."
|
|
::= { bgpNewCfgPeerEntry 14 }
|
|
|
|
bgpNewCfgPeerVipState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable VIP static routes."
|
|
::= { bgpNewCfgPeerEntry 15 }
|
|
|
|
bgpNewCfgPeerInRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the in route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { bgpNewCfgPeerEntry 16 }
|
|
|
|
bgpNewCfgPeerOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { bgpNewCfgPeerEntry 17 }
|
|
|
|
bgpNewCfgPeerAddInRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into in-rmap list. When read,
|
|
0 is returned."
|
|
::= { bgpNewCfgPeerEntry 18 }
|
|
|
|
bgpNewCfgPeerAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into out-rmap list. When read,
|
|
0 is returned."
|
|
::= { bgpNewCfgPeerEntry 19 }
|
|
|
|
bgpNewCfgPeerRemoveInRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { bgpNewCfgPeerEntry 20 }
|
|
|
|
bgpNewCfgPeerRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { bgpNewCfgPeerEntry 21 }
|
|
|
|
bgpNewCfgPeerHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Hold Time value of the BGP peer IP datagram. "
|
|
::= { bgpNewCfgPeerEntry 22 }
|
|
|
|
bgpNewCfgPeerKeepAlive OBJECT-TYPE
|
|
SYNTAX INTEGER (0..21845)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The KeepAlive Time value of the BGP peer IP datagram. "
|
|
::= { bgpNewCfgPeerEntry 23 }
|
|
|
|
bgpNewCfgPeerMinTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mininum time between advertisements of the BGP peer IP datagram. "
|
|
::= { bgpNewCfgPeerEntry 24 }
|
|
|
|
|
|
bgpNewCfgPeerConRetry OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Connect Retry Timer Interval value of the BGP peer IP datagram. "
|
|
::= { bgpNewCfgPeerEntry 25 }
|
|
|
|
bgpNewCfgPeerMinAS OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time between route originations of the BGP peer IP datagram. "
|
|
::= { bgpNewCfgPeerEntry 26 }
|
|
|
|
bgpNewCfgPeerRipState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable RIP static routes."
|
|
::= { bgpNewCfgPeerEntry 27 }
|
|
|
|
bgpNewCfgPeerDenyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable DENY route advertisement."
|
|
::= { bgpNewCfgPeerEntry 28 }
|
|
|
|
bgpNewCfgPeerNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value will be used by BGP peer as nexthop. "
|
|
::= { bgpNewCfgPeerEntry 29 }
|
|
|
|
bgpNewCfgPeerBfdState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turn BFD on/off for the peer."
|
|
::= { bgpNewCfgPeerEntry 30 }
|
|
|
|
--
|
|
-- BGP Aggregation Table
|
|
--
|
|
bgpAggrTableMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the BGP aggregation table."
|
|
::= { bgpCfg 5 }
|
|
|
|
bgpCurCfgAggrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BgpCurCfgAggrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of BGP aggregation configuration."
|
|
::= { bgpCfg 6 }
|
|
|
|
bgpCurCfgAggrEntry OBJECT-TYPE
|
|
SYNTAX BgpCurCfgAggrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a BGP aggregation."
|
|
INDEX { bgpCurCfgAggrIndex }
|
|
::= { bgpCurCfgAggrTable 1 }
|
|
|
|
BgpCurCfgAggrEntry ::= SEQUENCE {
|
|
bgpCurCfgAggrIndex Integer32,
|
|
bgpCurCfgAggrAddr IpAddress,
|
|
bgpCurCfgAggrMask IpAddress,
|
|
bgpCurCfgAggrState INTEGER
|
|
}
|
|
|
|
bgpCurCfgAggrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregation number for which the BGP aggregation is related."
|
|
::= { bgpCurCfgAggrEntry 1}
|
|
|
|
bgpCurCfgAggrAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the BGP aggregation."
|
|
::= { bgpCurCfgAggrEntry 2 }
|
|
|
|
bgpCurCfgAggrMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of the BGP aggregation."
|
|
::= { bgpCurCfgAggrEntry 3 }
|
|
|
|
bgpCurCfgAggrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the BGP aggregation."
|
|
::= { bgpCurCfgAggrEntry 4 }
|
|
|
|
bgpNewCfgAggrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BgpNewCfgAggrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of BGP aggregation configuration."
|
|
::= { bgpCfg 7 }
|
|
|
|
bgpNewCfgAggrEntry OBJECT-TYPE
|
|
SYNTAX BgpNewCfgAggrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an BGP aggregation."
|
|
INDEX { bgpNewCfgAggrIndex }
|
|
::= { bgpNewCfgAggrTable 1 }
|
|
|
|
BgpNewCfgAggrEntry ::= SEQUENCE {
|
|
bgpNewCfgAggrIndex Integer32,
|
|
bgpNewCfgAggrAddr IpAddress,
|
|
bgpNewCfgAggrMask IpAddress,
|
|
bgpNewCfgAggrState INTEGER,
|
|
bgpNewCfgAggrDelete INTEGER
|
|
}
|
|
|
|
bgpNewCfgAggrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregation number for which the BGP aggregation is related."
|
|
::= { bgpNewCfgAggrEntry 1}
|
|
|
|
bgpNewCfgAggrAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the BGP aggregation."
|
|
::= { bgpNewCfgAggrEntry 2 }
|
|
|
|
bgpNewCfgAggrMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of the BGP aggregation."
|
|
::= { bgpNewCfgAggrEntry 3 }
|
|
|
|
bgpNewCfgAggrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the BGP aggregation."
|
|
::= { bgpNewCfgAggrEntry 4 }
|
|
|
|
bgpNewCfgAggrDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { bgpNewCfgAggrEntry 5 }
|
|
|
|
--
|
|
-- IP OSPF configuration
|
|
--
|
|
ospfGeneral OBJECT IDENTIFIER ::= { ospfCfg 1 }
|
|
|
|
ospfCurCfgDefaultRouteMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the metric to be assigned."
|
|
::= { ospfGeneral 1 }
|
|
|
|
ospfNewCfgDefaultRouteMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the metric to be assigned."
|
|
::= { ospfGeneral 2 }
|
|
|
|
ospfCurCfgDefaultRouteMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the AS External metric type to be assigned."
|
|
::= { ospfGeneral 3 }
|
|
|
|
ospfNewCfgDefaultRouteMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the AS External metric type to be assigned."
|
|
::= { ospfGeneral 4 }
|
|
|
|
ospfIntfTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Interface table."
|
|
::= { ospfGeneral 5 }
|
|
|
|
ospfAreaTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Area table."
|
|
::= { ospfGeneral 6 }
|
|
|
|
ospfRangeTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Range table."
|
|
::= { ospfGeneral 7 }
|
|
|
|
ospfVirtIntfTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Virtual Interface
|
|
table."
|
|
::= { ospfGeneral 8 }
|
|
|
|
ospfHostTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Host table."
|
|
::= { ospfGeneral 9 }
|
|
|
|
ospfCurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF global state."
|
|
::= { ospfGeneral 10 }
|
|
|
|
ospfNewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Globally turn OSPF on or off."
|
|
::= { ospfGeneral 11 }
|
|
|
|
ospfCurCfgLsdb OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the LSDB limit for external LSA."
|
|
::= { ospfGeneral 12 }
|
|
|
|
ospfNewCfgLsdb OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the LSDB limit for external LSA."
|
|
::= { ospfGeneral 13 }
|
|
|
|
ospfCurCfgAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfCurCfgAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Area configuration in the current_config."
|
|
::= { ospfCfg 2 }
|
|
|
|
ospfCurCfgAreaEntry OBJECT-TYPE
|
|
SYNTAX OspfCurCfgAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPF area."
|
|
INDEX { ospfCurCfgAreaIndex, ospfCurCfgAreaId }
|
|
::= { ospfCurCfgAreaTable 1 }
|
|
|
|
OspfCurCfgAreaEntry ::= SEQUENCE {
|
|
ospfCurCfgAreaIndex Integer32,
|
|
ospfCurCfgAreaId IpAddress,
|
|
ospfCurCfgAreaSpfInterval INTEGER,
|
|
ospfCurCfgAreaAuthType INTEGER,
|
|
ospfCurCfgAreaType INTEGER,
|
|
ospfCurCfgAreaMetric INTEGER,
|
|
ospfCurCfgAreaState INTEGER
|
|
}
|
|
|
|
ospfCurCfgAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF area number for which the OSPF area table is related."
|
|
::= { ospfCurCfgAreaEntry 1}
|
|
|
|
ospfCurCfgAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF area."
|
|
::= { ospfCurCfgAreaEntry 2 }
|
|
|
|
ospfCurCfgAreaSpfInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SPF interval for the OSPF area."
|
|
::= { ospfCurCfgAreaEntry 3 }
|
|
|
|
ospfCurCfgAreaAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
password(2),
|
|
md5(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of authentication being used.
|
|
none(1) - no authentication
|
|
password(2) - use password
|
|
md5(3) - use MD5 authentication."
|
|
|
|
::= { ospfCurCfgAreaEntry 4 }
|
|
|
|
ospfCurCfgAreaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transit(1),
|
|
stub(2),
|
|
nssa(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of area being used."
|
|
::= { ospfCurCfgAreaEntry 5 }
|
|
|
|
ospfCurCfgAreaMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stub area metric for the OSPF area."
|
|
::= { ospfCurCfgAreaEntry 6 }
|
|
|
|
ospfCurCfgAreaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Globally turn OSPF on or off."
|
|
::= { ospfCurCfgAreaEntry 7 }
|
|
|
|
ospfNewCfgAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfNewCfgAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Area configuration in the new_config."
|
|
::= { ospfCfg 3 }
|
|
|
|
ospfNewCfgAreaEntry OBJECT-TYPE
|
|
SYNTAX OspfNewCfgAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPF area."
|
|
INDEX { ospfNewCfgAreaIndex, ospfNewCfgAreaId }
|
|
::= { ospfNewCfgAreaTable 1 }
|
|
|
|
OspfNewCfgAreaEntry ::= SEQUENCE {
|
|
ospfNewCfgAreaIndex Integer32,
|
|
ospfNewCfgAreaId IpAddress,
|
|
ospfNewCfgAreaSpfInterval INTEGER,
|
|
ospfNewCfgAreaAuthType INTEGER,
|
|
ospfNewCfgAreaType INTEGER,
|
|
ospfNewCfgAreaMetric INTEGER,
|
|
ospfNewCfgAreaState INTEGER,
|
|
ospfNewCfgAreaDelete INTEGER
|
|
}
|
|
|
|
ospfNewCfgAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF area number for which the OSPF area table is related."
|
|
::= { ospfNewCfgAreaEntry 1}
|
|
|
|
ospfNewCfgAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF area."
|
|
::= { ospfNewCfgAreaEntry 2 }
|
|
|
|
ospfNewCfgAreaSpfInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SPF interval for the OSPF area."
|
|
::= { ospfNewCfgAreaEntry 3 }
|
|
|
|
ospfNewCfgAreaAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
password(2),
|
|
md5(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of authentication being used.
|
|
none(1) - no authentication
|
|
password(2) - use password.
|
|
md5(3) - use MD5 authentication."
|
|
::= { ospfNewCfgAreaEntry 4 }
|
|
|
|
ospfNewCfgAreaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transit(1),
|
|
stub(2),
|
|
nssa(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of area being used."
|
|
::= { ospfNewCfgAreaEntry 5 }
|
|
|
|
ospfNewCfgAreaMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stub area metric for the OSPF area."
|
|
::= { ospfNewCfgAreaEntry 6 }
|
|
|
|
ospfNewCfgAreaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable OSPF Area."
|
|
::= { ospfNewCfgAreaEntry 7 }
|
|
|
|
ospfNewCfgAreaDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfNewCfgAreaEntry 8 }
|
|
|
|
|
|
|
|
ospfNewCfgVisionAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfNewCfgVisionAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Area configuration in the new_config."
|
|
::= { ospfCfg 16 }
|
|
|
|
ospfNewCfgVisionAreaEntry OBJECT-TYPE
|
|
SYNTAX OspfNewCfgVisionAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPF area."
|
|
INDEX { ospfNewCfgVisionAreaIndex }
|
|
::= { ospfNewCfgVisionAreaTable 1 }
|
|
|
|
OspfNewCfgVisionAreaEntry ::= SEQUENCE {
|
|
ospfNewCfgVisionAreaIndex Integer32,
|
|
ospfNewCfgVisionAreaId IpAddress,
|
|
ospfNewCfgVisionAreaSpfInterval INTEGER,
|
|
ospfNewCfgVisionAreaAuthType INTEGER,
|
|
ospfNewCfgVisionAreaType INTEGER,
|
|
ospfNewCfgVisionAreaMetric INTEGER,
|
|
ospfNewCfgVisionAreaState INTEGER,
|
|
ospfNewCfgVisionAreaDelete INTEGER
|
|
}
|
|
|
|
ospfNewCfgVisionAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF area number for which the OSPF area table is related."
|
|
::= { ospfNewCfgVisionAreaEntry 1}
|
|
|
|
ospfNewCfgVisionAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF area."
|
|
::= { ospfNewCfgVisionAreaEntry 2 }
|
|
|
|
ospfNewCfgVisionAreaSpfInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SPF interval for the OSPF area."
|
|
::= { ospfNewCfgVisionAreaEntry 3 }
|
|
|
|
ospfNewCfgVisionAreaAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
password(2),
|
|
md5(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of authentication being used.
|
|
none(1) - no authentication
|
|
password(2) - use password.
|
|
md5(3) - use MD5 authentication."
|
|
::= { ospfNewCfgVisionAreaEntry 4 }
|
|
|
|
ospfNewCfgVisionAreaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transit(1),
|
|
stub(2),
|
|
nssa(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of area being used."
|
|
::= { ospfNewCfgVisionAreaEntry 5 }
|
|
|
|
ospfNewCfgVisionAreaMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stub area metric for the OSPF area."
|
|
::= { ospfNewCfgVisionAreaEntry 6 }
|
|
|
|
ospfNewCfgVisionAreaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable OSPF Area."
|
|
::= { ospfNewCfgVisionAreaEntry 7 }
|
|
|
|
ospfNewCfgVisionAreaDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfNewCfgVisionAreaEntry 8 }
|
|
|
|
|
|
-- OSPF Host Table
|
|
|
|
ospfCurCfgHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfCurCfgHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Host configuration."
|
|
::= { ospfCfg 12 }
|
|
|
|
ospfCurCfgHostEntry OBJECT-TYPE
|
|
SYNTAX OspfCurCfgHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPF host."
|
|
INDEX { ospfCurCfgHostIndex }
|
|
::= { ospfCurCfgHostTable 1 }
|
|
|
|
OspfCurCfgHostEntry ::= SEQUENCE {
|
|
ospfCurCfgHostIndex Integer32,
|
|
ospfCurCfgHostIpAddr IpAddress,
|
|
ospfCurCfgHostAreaIndex Integer32,
|
|
ospfCurCfgHostCost INTEGER,
|
|
ospfCurCfgHostState INTEGER
|
|
}
|
|
|
|
ospfCurCfgHostIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF host number for which the OSPF host table is related."
|
|
::= { ospfCurCfgHostEntry 1}
|
|
|
|
ospfCurCfgHostIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF host."
|
|
::= { ospfCurCfgHostEntry 2 }
|
|
|
|
ospfCurCfgHostAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area index."
|
|
::= { ospfCurCfgHostEntry 3 }
|
|
|
|
ospfCurCfgHostCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cost of the host entry."
|
|
::= { ospfCurCfgHostEntry 4 }
|
|
|
|
ospfCurCfgHostState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable Host Entry."
|
|
::= { ospfCurCfgHostEntry 5 }
|
|
|
|
ospfNewCfgHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfNewCfgHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Host configuration."
|
|
::= { ospfCfg 13 }
|
|
|
|
ospfNewCfgHostEntry OBJECT-TYPE
|
|
SYNTAX OspfNewCfgHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPF host."
|
|
INDEX { ospfNewCfgHostIndex }
|
|
::= { ospfNewCfgHostTable 1 }
|
|
|
|
OspfNewCfgHostEntry ::= SEQUENCE {
|
|
ospfNewCfgHostIndex Integer32,
|
|
ospfNewCfgHostIpAddr IpAddress,
|
|
ospfNewCfgHostAreaIndex Integer32,
|
|
ospfNewCfgHostCost INTEGER,
|
|
ospfNewCfgHostState INTEGER,
|
|
ospfNewCfgHostDelete INTEGER
|
|
}
|
|
|
|
ospfNewCfgHostIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF host number for which the OSPF host table is related."
|
|
::= { ospfNewCfgHostEntry 1}
|
|
|
|
ospfNewCfgHostIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF host."
|
|
::= { ospfNewCfgHostEntry 2 }
|
|
|
|
ospfNewCfgHostAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF area index."
|
|
::= { ospfNewCfgHostEntry 3 }
|
|
|
|
ospfNewCfgHostCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cost of the host entry."
|
|
::= { ospfNewCfgHostEntry 4 }
|
|
|
|
ospfNewCfgHostState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable Host Entry."
|
|
::= { ospfNewCfgHostEntry 5 }
|
|
|
|
ospfNewCfgHostDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfNewCfgHostEntry 6 }
|
|
|
|
ospfMdkeyTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Mdkey table."
|
|
::= { ospfCfg 11 }
|
|
|
|
ospfCurCfgMdkeyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfCurCfgMdkeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF MD5 keys in the current_config."
|
|
::= { ospfCfg 5 }
|
|
|
|
ospfCurCfgMdkeyEntry OBJECT-TYPE
|
|
SYNTAX OspfCurCfgMdkeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPF MD keys table."
|
|
INDEX { ospfCurCfgMdkeyIndex }
|
|
::= { ospfCurCfgMdkeyTable 1 }
|
|
|
|
OspfCurCfgMdkeyEntry ::= SEQUENCE {
|
|
ospfCurCfgMdkeyIndex Integer32,
|
|
ospfCurCfgMdkeyKey DisplayString
|
|
}
|
|
|
|
ospfCurCfgMdkeyIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF MD5 Key number for which the OSPF MdKey table is related."
|
|
::= { ospfCurCfgMdkeyEntry 1}
|
|
|
|
ospfCurCfgMdkeyKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The character string representing the MD5 Key."
|
|
::= { ospfCurCfgMdkeyEntry 2 }
|
|
|
|
ospfNewCfgMdkeyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfNewCfgMdkeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF MD5 keys in the new_config."
|
|
::= { ospfCfg 6 }
|
|
|
|
ospfNewCfgMdkeyEntry OBJECT-TYPE
|
|
SYNTAX OspfNewCfgMdkeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPF MD keys table."
|
|
INDEX { ospfNewCfgMdkeyIndex }
|
|
::= { ospfNewCfgMdkeyTable 1 }
|
|
|
|
OspfNewCfgMdkeyEntry ::= SEQUENCE {
|
|
ospfNewCfgMdkeyIndex Integer32,
|
|
ospfNewCfgMdkeyKey DisplayString,
|
|
ospfNewCfgMdkeyDelete INTEGER
|
|
}
|
|
|
|
ospfNewCfgMdkeyIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF MD5 Key number for which the OSPF MdKey table is related."
|
|
::= { ospfNewCfgMdkeyEntry 1}
|
|
|
|
ospfNewCfgMdkeyKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The character string representing the MD5 Key."
|
|
::= { ospfNewCfgMdkeyEntry 2 }
|
|
|
|
ospfNewCfgMdkeyDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfNewCfgMdkeyEntry 3}
|
|
|
|
|
|
ospfCurCfgIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfCurCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Interface configuration in the current_config."
|
|
::= { ospfCfg 7 }
|
|
|
|
ospfCurCfgIntfEntry OBJECT-TYPE
|
|
SYNTAX OspfCurCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPF Interface."
|
|
INDEX { ospfCurCfgIntfIndex }
|
|
::= { ospfCurCfgIntfTable 1 }
|
|
|
|
OspfCurCfgIntfEntry ::= SEQUENCE {
|
|
ospfCurCfgIntfIndex Integer32,
|
|
ospfCurCfgIntfId IpAddress,
|
|
ospfCurCfgIntfMdkey INTEGER,
|
|
ospfCurCfgIntfAreaId INTEGER,
|
|
ospfCurCfgIntfPriority INTEGER,
|
|
ospfCurCfgIntfCost INTEGER,
|
|
ospfCurCfgIntfHello INTEGER,
|
|
ospfCurCfgIntfDead INTEGER,
|
|
ospfCurCfgIntfTransit INTEGER,
|
|
ospfCurCfgIntfRetrans INTEGER,
|
|
ospfCurCfgIntfKey DisplayString,
|
|
ospfCurCfgIntfState INTEGER,
|
|
ospfCurCfgIntfBfd INTEGER
|
|
}
|
|
|
|
ospfCurCfgIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface number for which the OSPF Interface table is
|
|
related."
|
|
::= { ospfCurCfgIntfEntry 1}
|
|
|
|
ospfCurCfgIntfId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF interface."
|
|
::= { ospfCurCfgIntfEntry 2 }
|
|
|
|
ospfCurCfgIntfMdkey OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD5 key for the OSPF interface
|
|
0 (none) no MD5 authentication."
|
|
::= { ospfCurCfgIntfEntry 3 }
|
|
|
|
ospfCurCfgIntfAreaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify Area Index."
|
|
::= { ospfCurCfgIntfEntry 4 }
|
|
|
|
ospfCurCfgIntfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify interface router priority."
|
|
::= { ospfCurCfgIntfEntry 5 }
|
|
|
|
ospfCurCfgIntfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface Cost."
|
|
::= { ospfCurCfgIntfEntry 6 }
|
|
|
|
ospfCurCfgIntfHello OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hello interval in seconds."
|
|
::= { ospfCurCfgIntfEntry 7 }
|
|
|
|
ospfCurCfgIntfDead OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dead interval in seconds."
|
|
::= { ospfCurCfgIntfEntry 8 }
|
|
|
|
ospfCurCfgIntfTransit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transit delay in seconds."
|
|
::= { ospfCurCfgIntfEntry 9 }
|
|
|
|
ospfCurCfgIntfRetrans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmit interval in seconds."
|
|
::= { ospfCurCfgIntfEntry 10 }
|
|
|
|
ospfCurCfgIntfKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify Authentication Key."
|
|
::= { ospfCurCfgIntfEntry 11 }
|
|
|
|
ospfCurCfgIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable OSPF Interface."
|
|
::= { ospfCurCfgIntfEntry 12 }
|
|
|
|
ospfCurCfgIntfBfd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turn BFD on/off for the OSPF interface."
|
|
::= { ospfCurCfgIntfEntry 13 }
|
|
|
|
ospfNewCfgIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfNewCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Interface configuration in the new_config."
|
|
::= { ospfCfg 8 }
|
|
|
|
ospfNewCfgIntfEntry OBJECT-TYPE
|
|
SYNTAX OspfNewCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPF Interface."
|
|
INDEX { ospfNewCfgIntfIndex }
|
|
::= { ospfNewCfgIntfTable 1 }
|
|
|
|
OspfNewCfgIntfEntry ::= SEQUENCE {
|
|
ospfNewCfgIntfIndex Integer32,
|
|
ospfNewCfgIntfId IpAddress,
|
|
ospfNewCfgIntfMdkey INTEGER,
|
|
ospfNewCfgIntfAreaId INTEGER,
|
|
ospfNewCfgIntfPriority INTEGER,
|
|
ospfNewCfgIntfCost INTEGER,
|
|
ospfNewCfgIntfHello INTEGER,
|
|
ospfNewCfgIntfDead INTEGER,
|
|
ospfNewCfgIntfTransit INTEGER,
|
|
ospfNewCfgIntfRetrans INTEGER,
|
|
ospfNewCfgIntfKey DisplayString,
|
|
ospfNewCfgIntfState INTEGER,
|
|
ospfNewCfgIntfDelete INTEGER,
|
|
ospfNewCfgIntfBfd INTEGER
|
|
}
|
|
|
|
ospfNewCfgIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface number for which the OSPF Interface table is
|
|
related."
|
|
::= { ospfNewCfgIntfEntry 1}
|
|
|
|
ospfNewCfgIntfId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF interface."
|
|
::= { ospfNewCfgIntfEntry 2 }
|
|
|
|
ospfNewCfgIntfMdkey OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD5 key for the OSPF interface
|
|
0 (none) no MD5 authentication."
|
|
::= { ospfNewCfgIntfEntry 3 }
|
|
|
|
ospfNewCfgIntfAreaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify Area Index."
|
|
::= { ospfNewCfgIntfEntry 4 }
|
|
|
|
ospfNewCfgIntfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify interface router priority."
|
|
::= { ospfNewCfgIntfEntry 5 }
|
|
|
|
ospfNewCfgIntfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify interface cost."
|
|
::= { ospfNewCfgIntfEntry 6 }
|
|
|
|
ospfNewCfgIntfHello OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hello interval in seconds."
|
|
::= { ospfNewCfgIntfEntry 7 }
|
|
|
|
ospfNewCfgIntfDead OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dead interval in seconds."
|
|
::= { ospfNewCfgIntfEntry 8 }
|
|
|
|
ospfNewCfgIntfTransit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transit delay in seconds."
|
|
::= { ospfNewCfgIntfEntry 9 }
|
|
|
|
ospfNewCfgIntfRetrans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmit interval in seconds."
|
|
::= { ospfNewCfgIntfEntry 10 }
|
|
|
|
ospfNewCfgIntfKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify Authentication Key."
|
|
::= { ospfNewCfgIntfEntry 11 }
|
|
|
|
ospfNewCfgIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable OSPF Interface."
|
|
::= { ospfNewCfgIntfEntry 12 }
|
|
|
|
ospfNewCfgIntfDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfNewCfgIntfEntry 13 }
|
|
|
|
ospfNewCfgIntfBfd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turn BFD on/off for the OSPF interface."
|
|
::= { ospfNewCfgIntfEntry 14 }
|
|
|
|
ospfCurCfgVirtIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfCurCfgVirtIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Virtual Interface configuration in the current
|
|
configuration."
|
|
::= { ospfCfg 9 }
|
|
|
|
ospfCurCfgVirtIntfEntry OBJECT-TYPE
|
|
SYNTAX OspfCurCfgVirtIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPF virtual Interface."
|
|
INDEX { ospfCurCfgVirtIntfIndex }
|
|
::= { ospfCurCfgVirtIntfTable 1 }
|
|
|
|
OspfCurCfgVirtIntfEntry ::= SEQUENCE {
|
|
ospfCurCfgVirtIntfIndex Integer32,
|
|
ospfCurCfgVirtIntfAreaId INTEGER,
|
|
ospfCurCfgVirtIntfNbr IpAddress,
|
|
ospfCurCfgVirtIntfMdkey INTEGER,
|
|
ospfCurCfgVirtIntfHello INTEGER,
|
|
ospfCurCfgVirtIntfDead INTEGER,
|
|
ospfCurCfgVirtIntfTransit INTEGER,
|
|
ospfCurCfgVirtIntfRetrans INTEGER,
|
|
ospfCurCfgVirtIntfKey DisplayString,
|
|
ospfCurCfgVirtIntfState INTEGER
|
|
}
|
|
|
|
ospfCurCfgVirtIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Virtual Interface number for which the OSPF
|
|
Virtual Interface table is related."
|
|
::= { ospfCurCfgVirtIntfEntry 1}
|
|
|
|
ospfCurCfgVirtIntfAreaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Area Id."
|
|
::= { ospfCurCfgVirtIntfEntry 2 }
|
|
|
|
ospfCurCfgVirtIntfNbr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF neighbour for this virtual interface."
|
|
::= { ospfCurCfgVirtIntfEntry 3 }
|
|
|
|
ospfCurCfgVirtIntfMdkey OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD5 key for the OSPF virtual interface
|
|
0 (none) no MD5 authentication."
|
|
::= { ospfCurCfgVirtIntfEntry 4 }
|
|
|
|
ospfCurCfgVirtIntfHello OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hello interval in seconds."
|
|
::= { ospfCurCfgVirtIntfEntry 5 }
|
|
|
|
ospfCurCfgVirtIntfDead OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dead interval in seconds."
|
|
::= { ospfCurCfgVirtIntfEntry 6 }
|
|
|
|
ospfCurCfgVirtIntfTransit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transit delay in seconds."
|
|
::= { ospfCurCfgVirtIntfEntry 7 }
|
|
|
|
ospfCurCfgVirtIntfRetrans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmit interval in seconds."
|
|
::= { ospfCurCfgVirtIntfEntry 8 }
|
|
|
|
ospfCurCfgVirtIntfKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify Authentication Key."
|
|
::= { ospfCurCfgVirtIntfEntry 9 }
|
|
|
|
ospfCurCfgVirtIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable OSPF Interface."
|
|
::= { ospfCurCfgVirtIntfEntry 10 }
|
|
|
|
ospfNewCfgVirtIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfNewCfgVirtIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Virtual Interface configuration in the new_config."
|
|
::= { ospfCfg 10 }
|
|
|
|
ospfNewCfgVirtIntfEntry OBJECT-TYPE
|
|
SYNTAX OspfNewCfgVirtIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPF virtual Interface."
|
|
INDEX { ospfNewCfgVirtIntfIndex }
|
|
::= { ospfNewCfgVirtIntfTable 1 }
|
|
|
|
OspfNewCfgVirtIntfEntry ::= SEQUENCE {
|
|
ospfNewCfgVirtIntfIndex Integer32,
|
|
ospfNewCfgVirtIntfAreaId INTEGER,
|
|
ospfNewCfgVirtIntfNbr IpAddress,
|
|
ospfNewCfgVirtIntfMdkey INTEGER,
|
|
ospfNewCfgVirtIntfHello INTEGER,
|
|
ospfNewCfgVirtIntfDead INTEGER,
|
|
ospfNewCfgVirtIntfTransit INTEGER,
|
|
ospfNewCfgVirtIntfRetrans INTEGER,
|
|
ospfNewCfgVirtIntfKey DisplayString,
|
|
ospfNewCfgVirtIntfState INTEGER,
|
|
ospfNewCfgVirtIntfDelete INTEGER
|
|
}
|
|
|
|
ospfNewCfgVirtIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Virtual Interface number for which the OSPF
|
|
Virtual Interface table is related."
|
|
::= { ospfNewCfgVirtIntfEntry 1}
|
|
|
|
ospfNewCfgVirtIntfAreaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Area Id."
|
|
::= { ospfNewCfgVirtIntfEntry 2 }
|
|
|
|
ospfNewCfgVirtIntfNbr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF neighbour for this virtual interface."
|
|
::= { ospfNewCfgVirtIntfEntry 3 }
|
|
|
|
ospfNewCfgVirtIntfMdkey OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD5 key for the OSPF virtual interface
|
|
0 (none) no MD5 authentication."
|
|
::= { ospfNewCfgVirtIntfEntry 4 }
|
|
|
|
ospfNewCfgVirtIntfHello OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hello interval in seconds."
|
|
::= { ospfNewCfgVirtIntfEntry 5 }
|
|
|
|
ospfNewCfgVirtIntfDead OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dead interval in seconds."
|
|
::= { ospfNewCfgVirtIntfEntry 6 }
|
|
|
|
ospfNewCfgVirtIntfTransit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transit delay in seconds."
|
|
::= { ospfNewCfgVirtIntfEntry 7 }
|
|
|
|
ospfNewCfgVirtIntfRetrans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmit interval in seconds."
|
|
::= { ospfNewCfgVirtIntfEntry 8 }
|
|
|
|
ospfNewCfgVirtIntfKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify Authentication Key.
|
|
Enter string of 8 characters or None."
|
|
::= { ospfNewCfgVirtIntfEntry 9 }
|
|
|
|
ospfNewCfgVirtIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable OSPF Interface."
|
|
::= { ospfNewCfgVirtIntfEntry 10 }
|
|
|
|
ospfNewCfgVirtIntfDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfNewCfgVirtIntfEntry 11 }
|
|
|
|
-- ospf range
|
|
|
|
ospfCurCfgRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfCurCfgRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF summary range in the current configuration."
|
|
::= { ospfCfg 14 }
|
|
|
|
ospfCurCfgRangeEntry OBJECT-TYPE
|
|
SYNTAX OspfCurCfgRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPF summary range."
|
|
INDEX { ospfCurCfgRangeIndex }
|
|
::= { ospfCurCfgRangeTable 1 }
|
|
|
|
OspfCurCfgRangeEntry ::= SEQUENCE {
|
|
ospfCurCfgRangeIndex Integer32,
|
|
ospfCurCfgRangeAddr IpAddress,
|
|
ospfCurCfgRangeMask IpAddress,
|
|
ospfCurCfgRangeAreaIndex Integer32,
|
|
ospfCurCfgRangeHideState INTEGER,
|
|
ospfCurCfgRangeState INTEGER
|
|
}
|
|
|
|
ospfCurCfgRangeIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The range number for which the OSPF summary range table is related."
|
|
::= { ospfCurCfgRangeEntry 1}
|
|
|
|
ospfCurCfgRangeAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the range."
|
|
::= { ospfCurCfgRangeEntry 2 }
|
|
|
|
ospfCurCfgRangeMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of the range."
|
|
::= { ospfCurCfgRangeEntry 3 }
|
|
|
|
ospfCurCfgRangeAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area index."
|
|
::= { ospfCurCfgRangeEntry 4 }
|
|
|
|
ospfCurCfgRangeHideState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the hide range."
|
|
::= { ospfCurCfgRangeEntry 5 }
|
|
|
|
ospfCurCfgRangeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the range."
|
|
::= { ospfCurCfgRangeEntry 6 }
|
|
|
|
ospfNewCfgRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfNewCfgRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF summary range in the new configuration."
|
|
::= { ospfCfg 15 }
|
|
|
|
ospfNewCfgRangeEntry OBJECT-TYPE
|
|
SYNTAX OspfNewCfgRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPF summary range."
|
|
INDEX { ospfNewCfgRangeIndex }
|
|
::= { ospfNewCfgRangeTable 1 }
|
|
|
|
OspfNewCfgRangeEntry ::= SEQUENCE {
|
|
ospfNewCfgRangeIndex Integer32,
|
|
ospfNewCfgRangeAddr IpAddress,
|
|
ospfNewCfgRangeMask IpAddress,
|
|
ospfNewCfgRangeAreaIndex Integer32,
|
|
ospfNewCfgRangeHideState INTEGER,
|
|
ospfNewCfgRangeState INTEGER,
|
|
ospfNewCfgRangeDelete INTEGER
|
|
}
|
|
|
|
ospfNewCfgRangeIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The range number for which the OSPF summary range table is related."
|
|
::= { ospfNewCfgRangeEntry 1}
|
|
|
|
ospfNewCfgRangeAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the range."
|
|
::= { ospfNewCfgRangeEntry 2 }
|
|
|
|
ospfNewCfgRangeMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of the range."
|
|
::= { ospfNewCfgRangeEntry 3 }
|
|
|
|
ospfNewCfgRangeAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area index."
|
|
::= { ospfNewCfgRangeEntry 4 }
|
|
|
|
ospfNewCfgRangeHideState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the hide range."
|
|
::= { ospfNewCfgRangeEntry 5 }
|
|
|
|
ospfNewCfgRangeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the range."
|
|
::= { ospfNewCfgRangeEntry 6 }
|
|
|
|
ospfNewCfgRangeDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfNewCfgRangeEntry 7 }
|
|
|
|
|
|
ospfRouteRedistribution OBJECT IDENTIFIER ::= { ospfCfg 4 }
|
|
|
|
ospfRedistributeStatic OBJECT IDENTIFIER ::= { ospfRouteRedistribution 1 }
|
|
|
|
ospfCurCfgStaticMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric to be assigned to static routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfRedistributeStatic 1 }
|
|
|
|
ospfNewCfgStaticMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric to be assigned to static routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfRedistributeStatic 2 }
|
|
|
|
ospfCurCfgStaticMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for static routes."
|
|
::= { ospfRedistributeStatic 3 }
|
|
|
|
ospfNewCfgStaticMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for static routes."
|
|
::= { ospfRedistributeStatic 4 }
|
|
|
|
ospfCurCfgStaticOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeStatic 5 }
|
|
|
|
ospfNewCfgStaticOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeStatic 6 }
|
|
|
|
ospfNewCfgStaticAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into out-rmap list. When read, 0 is returned."
|
|
::= { ospfRedistributeStatic 7 }
|
|
|
|
ospfNewCfgStaticRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfRedistributeStatic 8 }
|
|
|
|
ospfRedistributeEbgp OBJECT IDENTIFIER ::= { ospfRouteRedistribution 2 }
|
|
|
|
ospfCurCfgEbgpMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric to be assigned to External BGP routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfRedistributeEbgp 1 }
|
|
|
|
ospfNewCfgEbgpMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric to be assigned to External BGP routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfRedistributeEbgp 2 }
|
|
|
|
ospfCurCfgEbgpMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for External BGP routes."
|
|
::= { ospfRedistributeEbgp 3 }
|
|
|
|
ospfNewCfgEbgpMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for External BGP routes."
|
|
::= { ospfRedistributeEbgp 4 }
|
|
|
|
ospfCurCfgEbgpOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeEbgp 5 }
|
|
|
|
ospfNewCfgEbgpOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeEbgp 6 }
|
|
|
|
ospfNewCfgEbgpAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be added into out-rmap list. When read, 0 is returned."
|
|
::= { ospfRedistributeEbgp 7 }
|
|
|
|
ospfNewCfgEbgpRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfRedistributeEbgp 8 }
|
|
|
|
ospfRedistributeIbgp OBJECT IDENTIFIER ::= { ospfRouteRedistribution 3 }
|
|
|
|
ospfCurCfgIbgpMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for Internal BGP routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfRedistributeIbgp 1 }
|
|
|
|
ospfNewCfgIbgpMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for Internal BGP routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfRedistributeIbgp 2 }
|
|
|
|
ospfCurCfgIbgpMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for Internal BGP routes."
|
|
::= { ospfRedistributeIbgp 3 }
|
|
|
|
ospfNewCfgIbgpMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for Internal BGP routes."
|
|
::= { ospfRedistributeIbgp 4 }
|
|
|
|
ospfCurCfgIbgpOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeIbgp 5 }
|
|
|
|
ospfNewCfgIbgpOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeIbgp 6 }
|
|
|
|
ospfNewCfgIbgpAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into out-rmap list. When read, 0 is returned."
|
|
::= { ospfRedistributeIbgp 7 }
|
|
|
|
ospfNewCfgIbgpRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfRedistributeIbgp 8 }
|
|
|
|
ospfRedistributeFixed OBJECT IDENTIFIER ::= { ospfRouteRedistribution 4 }
|
|
|
|
ospfCurCfgFixedMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for fixed routes. A value of 0 indicates none"
|
|
::= { ospfRedistributeFixed 1 }
|
|
|
|
ospfNewCfgFixedMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for fixed routes. A value of 0 indicates none"
|
|
::= { ospfRedistributeFixed 2 }
|
|
|
|
ospfCurCfgFixedMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for fixed routes."
|
|
::= { ospfRedistributeFixed 3 }
|
|
|
|
ospfNewCfgFixedMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for fixed routes."
|
|
::= { ospfRedistributeFixed 4 }
|
|
|
|
ospfCurCfgFixedOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeFixed 5 }
|
|
|
|
ospfNewCfgFixedOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeFixed 6 }
|
|
|
|
ospfNewCfgFixedAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into out-rmap list. When read, 0 is returned."
|
|
::= { ospfRedistributeFixed 7 }
|
|
|
|
ospfNewCfgFixedRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfRedistributeFixed 8 }
|
|
|
|
ospfRedistributeRip OBJECT IDENTIFIER ::= { ospfRouteRedistribution 5 }
|
|
|
|
ospfCurCfgRipMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for RIP routes. A value of 0 indicates none"
|
|
::= { ospfRedistributeRip 1 }
|
|
|
|
ospfNewCfgRipMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for RIP routes. A value of 0 indicates none"
|
|
::= { ospfRedistributeRip 2 }
|
|
|
|
ospfCurCfgRipMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for RIP routes."
|
|
::= { ospfRedistributeRip 3 }
|
|
|
|
ospfNewCfgRipMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for RIP routes."
|
|
::= { ospfRedistributeRip 4 }
|
|
|
|
ospfCurCfgRipOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeRip 5 }
|
|
|
|
ospfNewCfgRipOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfRedistributeRip 6 }
|
|
|
|
ospfNewCfgRipAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into out-rmap list. When read, 0 is returned."
|
|
::= { ospfRedistributeRip 7 }
|
|
|
|
ospfNewCfgRipRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfRedistributeRip 8 }
|
|
--
|
|
-- IP OSPFv3 configuration
|
|
--
|
|
ospfv3General OBJECT IDENTIFIER ::= { ospfv3Cfg 1 }
|
|
|
|
ospfv3CurCfgDefaultRouteMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the metric to be assigned."
|
|
::= { ospfv3General 1 }
|
|
|
|
ospfv3NewCfgDefaultRouteMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the metric to be assigned."
|
|
::= { ospfv3General 2 }
|
|
|
|
ospfv3CurCfgDefaultRouteMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the AS External metric type to be assigned."
|
|
::= { ospfv3General 3 }
|
|
|
|
ospfv3NewCfgDefaultRouteMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the AS External metric type to be assigned."
|
|
::= { ospfv3General 4 }
|
|
|
|
ospfv3IntfTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Interface table."
|
|
::= { ospfv3General 5 }
|
|
|
|
ospfv3AreaTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Area table."
|
|
::= { ospfv3General 6 }
|
|
|
|
ospfv3RangeTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Range table."
|
|
::= { ospfv3General 7 }
|
|
|
|
ospfv3VirtIntfTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Virtual Interface
|
|
table."
|
|
::= { ospfv3General 8 }
|
|
|
|
ospfv3HostTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the OSPF Host table."
|
|
::= { ospfv3General 9 }
|
|
|
|
ospfv3CurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF global state."
|
|
::= { ospfv3General 10 }
|
|
|
|
ospfv3NewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Globally turn OSPF on or off."
|
|
::= { ospfv3General 11 }
|
|
|
|
ospfv3CurCfgLsdb OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the LSDB limit for external LSA."
|
|
::= { ospfv3General 12 }
|
|
|
|
ospfv3NewCfgLsdb OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the LSDB limit for external LSA."
|
|
::= { ospfv3General 13 }
|
|
|
|
ospfv3CurCfgAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3CurCfgAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Area configuration in the current_config."
|
|
::= { ospfv3Cfg 2 }
|
|
|
|
ospfv3CurCfgAreaEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3CurCfgAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPFv3 area."
|
|
INDEX { ospfv3CurCfgAreaIndex, ospfv3CurCfgAreaId }
|
|
::= { ospfv3CurCfgAreaTable 1 }
|
|
|
|
Ospfv3CurCfgAreaEntry ::= SEQUENCE {
|
|
ospfv3CurCfgAreaIndex Integer32,
|
|
ospfv3CurCfgAreaId IpAddress,
|
|
ospfv3CurCfgAreaSpfInterval INTEGER,
|
|
ospfv3CurCfgAreaType INTEGER,
|
|
ospfv3CurCfgAreaMetric INTEGER,
|
|
ospfv3CurCfgAreaMType INTEGER,
|
|
ospfv3CurCfgAreaSummary INTEGER,
|
|
ospfv3CurCfgAreaTrRole INTEGER,
|
|
ospfv3CurCfgAreaState INTEGER,
|
|
ospfv3CurCfgAreaIDRW IpAddress
|
|
}
|
|
|
|
ospfv3CurCfgAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 area number for which the OSPF area table is related."
|
|
::= { ospfv3CurCfgAreaEntry 1}
|
|
|
|
ospfv3CurCfgAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPFv3 area."
|
|
::= { ospfv3CurCfgAreaEntry 2 }
|
|
|
|
ospfv3CurCfgAreaSpfInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SPF interval for the OSPFv3 area."
|
|
::= { ospfv3CurCfgAreaEntry 3 }
|
|
|
|
ospfv3CurCfgAreaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transit(1),
|
|
stub(2),
|
|
nssa(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of area being used."
|
|
::= { ospfv3CurCfgAreaEntry 4 }
|
|
|
|
ospfv3CurCfgAreaMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stub area metric for the OSPFv3 area."
|
|
::= { ospfv3CurCfgAreaEntry 5 }
|
|
|
|
ospfv3CurCfgAreaMType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v3(1),
|
|
compare-cost(2),
|
|
non-compare(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Metric type"
|
|
::= { ospfv3CurCfgAreaEntry 6 }
|
|
|
|
ospfv3CurCfgAreaSummary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ena(1),
|
|
dis(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Area summary import ena/dis"
|
|
::= { ospfv3CurCfgAreaEntry 7 }
|
|
|
|
ospfv3CurCfgAreaTrRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
always(1),
|
|
candidate(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Translator role"
|
|
::= { ospfv3CurCfgAreaEntry 8 }
|
|
|
|
ospfv3CurCfgAreaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Globally turn OSPFv3 on or off."
|
|
::= { ospfv3CurCfgAreaEntry 9 }
|
|
|
|
ospfv3CurCfgAreaIDRW OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPFv3 area."
|
|
::= { ospfv3CurCfgAreaEntry 10 }
|
|
|
|
ospfv3NewCfgAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3NewCfgAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Area configuration in the new_config."
|
|
::= { ospfv3Cfg 3 }
|
|
|
|
ospfv3NewCfgAreaEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3NewCfgAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPFv3 area."
|
|
INDEX { ospfv3NewCfgAreaIndex, ospfv3NewCfgAreaId }
|
|
::= { ospfv3NewCfgAreaTable 1 }
|
|
|
|
Ospfv3NewCfgAreaEntry ::= SEQUENCE {
|
|
ospfv3NewCfgAreaIndex Integer32,
|
|
ospfv3NewCfgAreaId IpAddress,
|
|
ospfv3NewCfgAreaSpfInterval INTEGER,
|
|
ospfv3NewCfgAreaType INTEGER,
|
|
ospfv3NewCfgAreaMetric INTEGER,
|
|
ospfv3NewCfgAreaMType INTEGER,
|
|
ospfv3NewCfgAreaSummary INTEGER,
|
|
ospfv3NewCfgAreaTrRole INTEGER,
|
|
ospfv3NewCfgAreaState INTEGER,
|
|
ospfv3NewCfgAreaDelete INTEGER,
|
|
ospfv3NewCfgAreaIDRW IpAddress
|
|
}
|
|
|
|
ospfv3NewCfgAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 area number for which the area table is related."
|
|
::= { ospfv3NewCfgAreaEntry 1}
|
|
|
|
ospfv3NewCfgAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The octal notation of the OSPFv3 area."
|
|
::= { ospfv3NewCfgAreaEntry 2 }
|
|
|
|
ospfv3NewCfgAreaSpfInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SPF interval for the OSPFv3 area."
|
|
::= { ospfv3NewCfgAreaEntry 3 }
|
|
|
|
ospfv3NewCfgAreaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transit(1),
|
|
stub(2),
|
|
nssa(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of area being used."
|
|
::= { ospfv3NewCfgAreaEntry 4 }
|
|
|
|
ospfv3NewCfgAreaMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stub area metric for the OSPFv3 area."
|
|
::= { ospfv3NewCfgAreaEntry 5 }
|
|
|
|
ospfv3NewCfgAreaMType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v3(1),
|
|
compare-cost(2),
|
|
non-compare(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Metric type"
|
|
::= { ospfv3NewCfgAreaEntry 6}
|
|
|
|
ospfv3NewCfgAreaSummary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ospfv3 summary import ena/dis"
|
|
::= { ospfv3NewCfgAreaEntry 7}
|
|
|
|
ospfv3NewCfgAreaTrRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
always(1),
|
|
candidate(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Translator role"
|
|
::= { ospfv3NewCfgAreaEntry 8}
|
|
|
|
ospfv3NewCfgAreaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable OSPFv3 Area."
|
|
::= { ospfv3NewCfgAreaEntry 9 }
|
|
|
|
ospfv3NewCfgAreaDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfv3NewCfgAreaEntry 10 }
|
|
|
|
ospfv3NewCfgAreaIDRW OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The octal notation of the OSPFv3 area."
|
|
::= { ospfv3NewCfgAreaEntry 11 }
|
|
|
|
-- OSPFv3 Host Table
|
|
|
|
ospfv3CurCfgHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3CurCfgHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Host configuration."
|
|
::= { ospfv3Cfg 12 }
|
|
|
|
ospfv3CurCfgHostEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3CurCfgHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPFv3 host."
|
|
INDEX { ospfv3CurCfgHostIndex }
|
|
::= { ospfv3CurCfgHostTable 1 }
|
|
|
|
Ospfv3CurCfgHostEntry ::= SEQUENCE {
|
|
ospfv3CurCfgHostIndex Integer32,
|
|
ospfv3CurCfgHostIp6Addr DisplayString,
|
|
ospfv3CurCfgHostAreaIndex Integer32,
|
|
ospfv3CurCfgHostCost INTEGER,
|
|
ospfv3CurCfgHostState INTEGER
|
|
}
|
|
|
|
ospfv3CurCfgHostIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 host number for which the OSPF host table is related."
|
|
::= { ospfv3CurCfgHostEntry 1}
|
|
|
|
ospfv3CurCfgHostIp6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPFv3 host."
|
|
::= { ospfv3CurCfgHostEntry 2 }
|
|
|
|
ospfv3CurCfgHostAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area index."
|
|
::= { ospfv3CurCfgHostEntry 3 }
|
|
|
|
ospfv3CurCfgHostCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cost of the host entry."
|
|
::= { ospfv3CurCfgHostEntry 4 }
|
|
|
|
ospfv3CurCfgHostState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable Host Entry."
|
|
::= { ospfv3CurCfgHostEntry 5 }
|
|
|
|
ospfv3NewCfgHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3NewCfgHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Host configuration."
|
|
::= { ospfv3Cfg 13 }
|
|
|
|
ospfv3NewCfgHostEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3NewCfgHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPFv3 host."
|
|
INDEX { ospfv3NewCfgHostIndex }
|
|
::= { ospfv3NewCfgHostTable 1 }
|
|
|
|
Ospfv3NewCfgHostEntry ::= SEQUENCE {
|
|
ospfv3NewCfgHostIndex Integer32,
|
|
ospfv3NewCfgHostIp6Addr DisplayString,
|
|
ospfv3NewCfgHostAreaIndex Integer32,
|
|
ospfv3NewCfgHostCost INTEGER,
|
|
ospfv3NewCfgHostState INTEGER,
|
|
ospfv3NewCfgHostDelete INTEGER
|
|
}
|
|
|
|
ospfv3NewCfgHostIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 host number for which the OSPFv3 host table is related."
|
|
::= { ospfv3NewCfgHostEntry 1}
|
|
|
|
ospfv3NewCfgHostIp6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPFv3 host."
|
|
::= { ospfv3NewCfgHostEntry 2 }
|
|
|
|
ospfv3NewCfgHostAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 area index."
|
|
::= { ospfv3NewCfgHostEntry 3 }
|
|
|
|
ospfv3NewCfgHostCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cost of the host entry."
|
|
::= { ospfv3NewCfgHostEntry 4 }
|
|
|
|
ospfv3NewCfgHostState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable Host Entry."
|
|
::= { ospfv3NewCfgHostEntry 5 }
|
|
|
|
ospfv3NewCfgHostDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfv3NewCfgHostEntry 6 }
|
|
|
|
ospfv3CurCfgIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3CurCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Interface configuration in the current_config."
|
|
::= { ospfv3Cfg 7 }
|
|
|
|
ospfv3CurCfgIntfEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3CurCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPFv3 Interface."
|
|
INDEX { ospfv3CurCfgIntfIndex }
|
|
::= { ospfv3CurCfgIntfTable 1 }
|
|
|
|
Ospfv3CurCfgIntfEntry ::= SEQUENCE {
|
|
ospfv3CurCfgIntfIndex Integer32,
|
|
ospfv3CurCfgIntfId IpAddress,
|
|
ospfv3CurCfgIntfAreaId INTEGER,
|
|
ospfv3CurCfgIntfPriority INTEGER,
|
|
ospfv3CurCfgIntfCost INTEGER,
|
|
ospfv3CurCfgIntfHello INTEGER,
|
|
ospfv3CurCfgIntfDead INTEGER,
|
|
ospfv3CurCfgIntfTransit INTEGER,
|
|
ospfv3CurCfgIntfRetrans INTEGER,
|
|
ospfv3CurCfgIntfState INTEGER
|
|
}
|
|
|
|
ospfv3CurCfgIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface number for which the OSPFv3 Interface table is
|
|
related."
|
|
::= { ospfv3CurCfgIntfEntry 1}
|
|
|
|
ospfv3CurCfgIntfId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPFv3 interface."
|
|
::= { ospfv3CurCfgIntfEntry 2 }
|
|
|
|
ospfv3CurCfgIntfAreaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify Area Index."
|
|
::= { ospfv3CurCfgIntfEntry 3 }
|
|
|
|
ospfv3CurCfgIntfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify interface router priority."
|
|
::= { ospfv3CurCfgIntfEntry 4 }
|
|
|
|
ospfv3CurCfgIntfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface Cost."
|
|
::= { ospfv3CurCfgIntfEntry 5 }
|
|
|
|
ospfv3CurCfgIntfHello OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hello interval in seconds."
|
|
::= { ospfv3CurCfgIntfEntry 6 }
|
|
|
|
ospfv3CurCfgIntfDead OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dead interval in seconds."
|
|
::= { ospfv3CurCfgIntfEntry 7 }
|
|
|
|
ospfv3CurCfgIntfTransit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transit delay in seconds."
|
|
::= { ospfv3CurCfgIntfEntry 8 }
|
|
|
|
ospfv3CurCfgIntfRetrans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmit interval in seconds."
|
|
::= { ospfv3CurCfgIntfEntry 9 }
|
|
|
|
ospfv3CurCfgIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPFv3 Interface Enabled/disabled ."
|
|
::= { ospfv3CurCfgIntfEntry 12 }
|
|
|
|
ospfv3NewCfgIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3NewCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Interface configuration in the new_config."
|
|
::= { ospfv3Cfg 8 }
|
|
|
|
ospfv3NewCfgIntfEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3NewCfgIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPFv3 Interface."
|
|
INDEX { ospfv3NewCfgIntfIndex }
|
|
::= { ospfv3NewCfgIntfTable 1 }
|
|
|
|
Ospfv3NewCfgIntfEntry ::= SEQUENCE {
|
|
ospfv3NewCfgIntfIndex Integer32,
|
|
ospfv3NewCfgIntfId IpAddress,
|
|
ospfv3NewCfgIntfAreaId INTEGER,
|
|
ospfv3NewCfgIntfPriority INTEGER,
|
|
ospfv3NewCfgIntfCost INTEGER,
|
|
ospfv3NewCfgIntfHello INTEGER,
|
|
ospfv3NewCfgIntfDead INTEGER,
|
|
ospfv3NewCfgIntfTransit INTEGER,
|
|
ospfv3NewCfgIntfRetrans INTEGER,
|
|
ospfv3NewCfgIntfState INTEGER,
|
|
ospfv3NewCfgIntfDelete INTEGER
|
|
}
|
|
|
|
ospfv3NewCfgIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface number for which the OSPFv3 Interface table is
|
|
related."
|
|
::= { ospfv3NewCfgIntfEntry 1}
|
|
|
|
ospfv3NewCfgIntfId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF interface."
|
|
::= { ospfv3NewCfgIntfEntry 2 }
|
|
|
|
ospfv3NewCfgIntfAreaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify Area Index."
|
|
::= { ospfv3NewCfgIntfEntry 3 }
|
|
|
|
ospfv3NewCfgIntfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify interface router priority."
|
|
::= { ospfv3NewCfgIntfEntry 4 }
|
|
|
|
ospfv3NewCfgIntfCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify interface cost."
|
|
::= { ospfv3NewCfgIntfEntry 5 }
|
|
|
|
ospfv3NewCfgIntfHello OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hello interval in seconds."
|
|
::= { ospfv3NewCfgIntfEntry 6 }
|
|
|
|
ospfv3NewCfgIntfDead OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dead interval in seconds."
|
|
::= { ospfv3NewCfgIntfEntry 7 }
|
|
|
|
ospfv3NewCfgIntfTransit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transit delay in seconds."
|
|
::= { ospfv3NewCfgIntfEntry 8 }
|
|
|
|
ospfv3NewCfgIntfRetrans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmit interval in seconds."
|
|
::= { ospfv3NewCfgIntfEntry 9 }
|
|
|
|
ospfv3NewCfgIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable OSPFv3 Interface."
|
|
::= { ospfv3NewCfgIntfEntry 12 }
|
|
|
|
ospfv3NewCfgIntfDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfv3NewCfgIntfEntry 13 }
|
|
|
|
ospfv3CurCfgVirtIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3CurCfgVirtIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Virtual Interface configuration in the current
|
|
configuration."
|
|
::= { ospfv3Cfg 9 }
|
|
|
|
ospfv3CurCfgVirtIntfEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3CurCfgVirtIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPFv3 virtual Interface."
|
|
INDEX { ospfv3CurCfgVirtIntfIndex }
|
|
::= { ospfv3CurCfgVirtIntfTable 1 }
|
|
|
|
Ospfv3CurCfgVirtIntfEntry ::= SEQUENCE {
|
|
ospfv3CurCfgVirtIntfIndex Integer32,
|
|
ospfv3CurCfgVirtIntfAreaId INTEGER,
|
|
ospfv3CurCfgVirtIntfNbr IpAddress,
|
|
ospfv3CurCfgVirtIntfHello INTEGER,
|
|
ospfv3CurCfgVirtIntfDead INTEGER,
|
|
ospfv3CurCfgVirtIntfTransit INTEGER,
|
|
ospfv3CurCfgVirtIntfRetrans INTEGER,
|
|
ospfv3CurCfgVirtIntfState INTEGER
|
|
}
|
|
|
|
ospfv3CurCfgVirtIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Virtual Interface number for which the OSPFv3
|
|
Virtual Interface table is related."
|
|
::= { ospfv3CurCfgVirtIntfEntry 1}
|
|
|
|
ospfv3CurCfgVirtIntfAreaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Area Id."
|
|
::= { ospfv3CurCfgVirtIntfEntry 2 }
|
|
|
|
ospfv3CurCfgVirtIntfNbr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPFv3 neighbour for this virtual interface."
|
|
::= { ospfv3CurCfgVirtIntfEntry 3 }
|
|
|
|
ospfv3CurCfgVirtIntfHello OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hello interval in seconds."
|
|
::= { ospfv3CurCfgVirtIntfEntry 4 }
|
|
|
|
ospfv3CurCfgVirtIntfDead OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dead interval in seconds."
|
|
::= { ospfv3CurCfgVirtIntfEntry 5 }
|
|
|
|
ospfv3CurCfgVirtIntfTransit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transit delay in seconds."
|
|
::= { ospfv3CurCfgVirtIntfEntry 6 }
|
|
|
|
ospfv3CurCfgVirtIntfRetrans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmit interval in seconds."
|
|
::= { ospfv3CurCfgVirtIntfEntry 7 }
|
|
|
|
ospfv3CurCfgVirtIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPFv3 Interface Enabled/disabled ."
|
|
::= { ospfv3CurCfgVirtIntfEntry 8 }
|
|
|
|
ospfv3NewCfgVirtIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3NewCfgVirtIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Virtual Interface configuration in the new_config."
|
|
::= { ospfv3Cfg 10 }
|
|
|
|
ospfv3NewCfgVirtIntfEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3NewCfgVirtIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPFv3 virtual Interface."
|
|
INDEX { ospfv3NewCfgVirtIntfIndex }
|
|
::= { ospfv3NewCfgVirtIntfTable 1 }
|
|
|
|
Ospfv3NewCfgVirtIntfEntry ::= SEQUENCE {
|
|
ospfv3NewCfgVirtIntfIndex Integer32,
|
|
ospfv3NewCfgVirtIntfAreaId INTEGER,
|
|
ospfv3NewCfgVirtIntfNbr IpAddress,
|
|
ospfv3NewCfgVirtIntfHello INTEGER,
|
|
ospfv3NewCfgVirtIntfDead INTEGER,
|
|
ospfv3NewCfgVirtIntfTransit INTEGER,
|
|
ospfv3NewCfgVirtIntfRetrans INTEGER,
|
|
ospfv3NewCfgVirtIntfState INTEGER,
|
|
ospfv3NewCfgVirtIntfDelete INTEGER
|
|
}
|
|
|
|
ospfv3NewCfgVirtIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Virtual Interface number for which the OSPF v3
|
|
Virtual Interface table is related."
|
|
::= { ospfv3NewCfgVirtIntfEntry 1}
|
|
|
|
ospfv3NewCfgVirtIntfAreaId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Area Id."
|
|
::= { ospfv3NewCfgVirtIntfEntry 2 }
|
|
|
|
ospfv3NewCfgVirtIntfNbr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPFv3 neighbour for this virtual interface."
|
|
::= { ospfv3NewCfgVirtIntfEntry 3 }
|
|
|
|
ospfv3NewCfgVirtIntfHello OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hello interval in seconds."
|
|
::= { ospfv3NewCfgVirtIntfEntry 4 }
|
|
|
|
ospfv3NewCfgVirtIntfDead OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dead interval in seconds."
|
|
::= { ospfv3NewCfgVirtIntfEntry 5 }
|
|
|
|
ospfv3NewCfgVirtIntfTransit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transit delay in seconds."
|
|
::= { ospfv3NewCfgVirtIntfEntry 6 }
|
|
|
|
ospfv3NewCfgVirtIntfRetrans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmit interval in seconds."
|
|
::= { ospfv3NewCfgVirtIntfEntry 7 }
|
|
|
|
ospfv3NewCfgVirtIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable OSPFv3 Interface."
|
|
::= { ospfv3NewCfgVirtIntfEntry 8 }
|
|
|
|
ospfv3NewCfgVirtIntfDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfv3NewCfgVirtIntfEntry 9 }
|
|
|
|
-- ospfv3 range
|
|
|
|
ospfv3CurCfgRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3CurCfgRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 summary range in the current configuration."
|
|
::= { ospfv3Cfg 14 }
|
|
|
|
ospfv3CurCfgRangeEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3CurCfgRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPFv3 summary range."
|
|
INDEX { ospfv3CurCfgRangeIndex }
|
|
::= { ospfv3CurCfgRangeTable 1 }
|
|
|
|
Ospfv3CurCfgRangeEntry ::= SEQUENCE {
|
|
ospfv3CurCfgRangeIndex Integer32,
|
|
ospfv3CurCfgRangeAddr DisplayString,
|
|
ospfv3CurCfgRangePrefix INTEGER,
|
|
ospfv3CurCfgRangeAreaIndex Integer32,
|
|
ospfv3CurCfgRangeHideState INTEGER,
|
|
ospfv3CurCfgRangeState INTEGER
|
|
}
|
|
|
|
ospfv3CurCfgRangeIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The range number for which the OSPFv3 summary range table is related."
|
|
::= { ospfv3CurCfgRangeEntry 1}
|
|
|
|
ospfv3CurCfgRangeAddr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the range."
|
|
::= { ospfv3CurCfgRangeEntry 2 }
|
|
|
|
ospfv3CurCfgRangePrefix OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of the range."
|
|
::= { ospfv3CurCfgRangeEntry 3 }
|
|
|
|
ospfv3CurCfgRangeAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area index."
|
|
::= { ospfv3CurCfgRangeEntry 4 }
|
|
|
|
ospfv3CurCfgRangeHideState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the hide range."
|
|
::= { ospfv3CurCfgRangeEntry 5 }
|
|
|
|
ospfv3CurCfgRangeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the range."
|
|
::= { ospfv3CurCfgRangeEntry 6 }
|
|
|
|
ospfv3NewCfgRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3NewCfgRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 summary range in the new configuration."
|
|
::= { ospfv3Cfg 15 }
|
|
|
|
ospfv3NewCfgRangeEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3NewCfgRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an OSPFv3 summary range."
|
|
INDEX { ospfv3NewCfgRangeIndex }
|
|
::= { ospfv3NewCfgRangeTable 1 }
|
|
|
|
Ospfv3NewCfgRangeEntry ::= SEQUENCE {
|
|
ospfv3NewCfgRangeIndex Integer32,
|
|
ospfv3NewCfgRangeAddr DisplayString,
|
|
ospfv3NewCfgRangePrefix INTEGER,
|
|
ospfv3NewCfgRangeAreaIndex Integer32,
|
|
ospfv3NewCfgRangeHideState INTEGER,
|
|
ospfv3NewCfgRangeState INTEGER,
|
|
ospfv3NewCfgRangeDelete INTEGER
|
|
}
|
|
|
|
ospfv3NewCfgRangeIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The range number for which the OSPFv3 summary range table is related."
|
|
::= { ospfv3NewCfgRangeEntry 1}
|
|
|
|
ospfv3NewCfgRangeAddr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the range."
|
|
::= { ospfv3NewCfgRangeEntry 2 }
|
|
|
|
ospfv3NewCfgRangePrefix OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix length of the range."
|
|
::= { ospfv3NewCfgRangeEntry 3 }
|
|
|
|
ospfv3NewCfgRangeAreaIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area index."
|
|
::= { ospfv3NewCfgRangeEntry 4 }
|
|
|
|
ospfv3NewCfgRangeHideState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the hide range."
|
|
::= { ospfv3NewCfgRangeEntry 5 }
|
|
|
|
ospfv3NewCfgRangeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the range."
|
|
::= { ospfv3NewCfgRangeEntry 6 }
|
|
|
|
ospfv3NewCfgRangeDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ospfv3NewCfgRangeEntry 7 }
|
|
|
|
ospfv3RouteRedistribution OBJECT IDENTIFIER ::= { ospfv3Cfg 4 }
|
|
|
|
ospfv3RedistributeStatic OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 1 }
|
|
|
|
ospfv3CurCfgStaticMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric to be assigned to static routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfv3RedistributeStatic 1 }
|
|
|
|
ospfv3NewCfgStaticMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric to be assigned to static routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfv3RedistributeStatic 2 }
|
|
|
|
ospfv3CurCfgStaticMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for static routes."
|
|
::= { ospfv3RedistributeStatic 3 }
|
|
|
|
ospfv3NewCfgStaticMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for static routes."
|
|
::= { ospfv3RedistributeStatic 4 }
|
|
|
|
ospfv3CurCfgStaticOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeStatic 5 }
|
|
|
|
ospfv3NewCfgStaticOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeStatic 6 }
|
|
|
|
ospfv3NewCfgStaticAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into out-rmap list. When read, 0 is returned."
|
|
::= { ospfv3RedistributeStatic 7 }
|
|
|
|
ospfv3NewCfgStaticRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfv3RedistributeStatic 8 }
|
|
|
|
ospfv3RedistributeEbgp OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 2 }
|
|
|
|
ospfv3CurCfgEbgpMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric to be assigned to External BGP routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfv3RedistributeEbgp 1 }
|
|
|
|
ospfv3NewCfgEbgpMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric to be assigned to External BGP routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfv3RedistributeEbgp 2 }
|
|
|
|
ospfv3CurCfgEbgpMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for External BGP routes."
|
|
::= { ospfv3RedistributeEbgp 3 }
|
|
|
|
ospfv3NewCfgEbgpMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for External BGP routes."
|
|
::= { ospfv3RedistributeEbgp 4 }
|
|
|
|
ospfv3CurCfgEbgpOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeEbgp 5 }
|
|
|
|
ospfv3NewCfgEbgpOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeEbgp 6 }
|
|
|
|
ospfv3NewCfgEbgpAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be added into out-rmap list. When read, 0 is returned."
|
|
::= { ospfv3RedistributeEbgp 7 }
|
|
|
|
ospfv3NewCfgEbgpRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfv3RedistributeEbgp 8 }
|
|
|
|
ospfv3RedistributeIbgp OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 3 }
|
|
|
|
ospfv3CurCfgIbgpMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for Internal BGP routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfv3RedistributeIbgp 1 }
|
|
|
|
ospfv3NewCfgIbgpMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for Internal BGP routes.
|
|
A value of 0 indicates none."
|
|
::= { ospfv3RedistributeIbgp 2 }
|
|
|
|
ospfv3CurCfgIbgpMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for Internal BGP routes."
|
|
::= { ospfv3RedistributeIbgp 3 }
|
|
|
|
ospfv3NewCfgIbgpMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for Internal BGP routes."
|
|
::= { ospfv3RedistributeIbgp 4 }
|
|
|
|
ospfv3CurCfgIbgpOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeIbgp 5 }
|
|
|
|
ospfv3NewCfgIbgpOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeIbgp 6 }
|
|
|
|
ospfv3NewCfgIbgpAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into out-rmap list. When read, 0 is returned."
|
|
::= { ospfv3RedistributeIbgp 7 }
|
|
|
|
ospfv3NewCfgIbgpRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfv3RedistributeIbgp 8 }
|
|
|
|
ospfv3RedistributeFixed OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 4 }
|
|
|
|
ospfv3CurCfgFixedMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for fixed routes. A value of 0 indicates none"
|
|
::= { ospfv3RedistributeFixed 1 }
|
|
|
|
ospfv3NewCfgFixedMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for fixed routes. A value of 0 indicates none"
|
|
::= { ospfv3RedistributeFixed 2 }
|
|
|
|
ospfv3CurCfgFixedMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for fixed routes."
|
|
::= { ospfv3RedistributeFixed 3 }
|
|
|
|
ospfv3NewCfgFixedMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for fixed routes."
|
|
::= { ospfv3RedistributeFixed 4 }
|
|
|
|
ospfv3CurCfgFixedOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeFixed 5 }
|
|
|
|
ospfv3NewCfgFixedOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeFixed 6 }
|
|
|
|
ospfv3NewCfgFixedAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into out-rmap list. When read, 0 is returned."
|
|
::= { ospfv3RedistributeFixed 7 }
|
|
|
|
ospfv3NewCfgFixedRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfv3RedistributeFixed 8 }
|
|
|
|
ospfv3RedistributeRip OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 5 }
|
|
|
|
ospfv3CurCfgRipMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for RIP routes. A value of 0 indicates none"
|
|
::= { ospfv3RedistributeRip 1 }
|
|
|
|
ospfv3NewCfgRipMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The export metric for RIP routes. A value of 0 indicates none"
|
|
::= { ospfv3RedistributeRip 2 }
|
|
|
|
ospfv3CurCfgRipMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for RIP routes."
|
|
::= { ospfv3RedistributeRip 3 }
|
|
|
|
ospfv3NewCfgRipMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
type1(2),
|
|
type2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS External metric type for RIP routes."
|
|
::= { ospfv3RedistributeRip 4 }
|
|
|
|
ospfv3CurCfgRipOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeRip 5 }
|
|
|
|
ospfv3NewCfgRipOutRmapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route maps present in the out route map list.
|
|
The route maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Rmap 9
|
|
|| ||
|
|
|| ||___ Rmap 8
|
|
|| |____ Rmap 7
|
|
|| . . .
|
|
||_________ Rmap 2
|
|
|__________ Rmap 1
|
|
|
|
where x : 1 - The represented route map is selected
|
|
0 - The represented route map is not selected"
|
|
::= { ospfv3RedistributeRip 6 }
|
|
|
|
ospfv3NewCfgRipAddOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be add into out-rmap list. When read, 0 is returned."
|
|
::= { ospfv3RedistributeRip 7 }
|
|
|
|
ospfv3NewCfgRipRemoveOutRmap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route map to be removed from out-rmap list. When read,
|
|
0 is returned."
|
|
::= { ospfv3RedistributeRip 8 }
|
|
|
|
ipCurCfgRouterID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router ID of the switch."
|
|
::= { ipGeneralCfg 1 }
|
|
|
|
ipNewCfgRouterID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router ID of the switch."
|
|
::= { ipGeneralCfg 2 }
|
|
|
|
ipCurCfgASNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The autonomous system (AS) number."
|
|
::= { ipGeneralCfg 3 }
|
|
|
|
ipNewCfgASNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The autonomous system (AS) number."
|
|
::= { ipGeneralCfg 4 }
|
|
|
|
|
|
ipCurCfgFragTblSize OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Fragmentation table size in 20k|40k|60k format."
|
|
::= { ipGeneralCfg 5 }
|
|
|
|
ipNewCfgFragTblSize OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Fragmentation table size in 20k|40k|60k format."
|
|
::= { ipGeneralCfg 6 }
|
|
|
|
--
|
|
-- IPMC Static Route Configuration
|
|
--
|
|
-- Static ARP Configuration
|
|
--
|
|
ipStaticArpTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the Static ARP table."
|
|
::= { ipStaticArpCfg 1 }
|
|
|
|
ipCurCfgStaticArpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpCurCfgStaticArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static ARPs in the current configuration block."
|
|
::= { ipStaticArpCfg 2 }
|
|
|
|
ipCurCfgStaticArpEntry OBJECT-TYPE
|
|
SYNTAX IpCurCfgStaticArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static ARP table"
|
|
INDEX { ipCurCfgStaticArpIndx }
|
|
::= { ipCurCfgStaticArpTable 1 }
|
|
|
|
IpCurCfgStaticArpEntry ::= SEQUENCE {
|
|
ipCurCfgStaticArpIndx Integer32,
|
|
ipCurCfgStaticArpIp IpAddress,
|
|
ipCurCfgStaticArpMAC PhysAddress,
|
|
ipCurCfgStaticArpVlan Integer32,
|
|
ipCurCfgStaticArpPort Integer32
|
|
}
|
|
|
|
ipCurCfgStaticArpIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the static ARP table."
|
|
::= { ipCurCfgStaticArpEntry 1}
|
|
|
|
ipCurCfgStaticArpIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address for the ARP entry."
|
|
::= { ipCurCfgStaticArpEntry 2}
|
|
|
|
ipCurCfgStaticArpMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address for the ARP entry."
|
|
::= { ipCurCfgStaticArpEntry 3 }
|
|
|
|
ipCurCfgStaticArpVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN for the ARP entry."
|
|
::= { ipCurCfgStaticArpEntry 4}
|
|
|
|
ipCurCfgStaticArpPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port for the ARP entry."
|
|
::= { ipCurCfgStaticArpEntry 5}
|
|
|
|
ipNewCfgStaticArpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNewCfgStaticArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static ARPs in the new configuration block."
|
|
::= { ipStaticArpCfg 3 }
|
|
|
|
ipNewCfgStaticArpEntry OBJECT-TYPE
|
|
SYNTAX IpNewCfgStaticArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static ARP table"
|
|
INDEX { ipNewCfgStaticArpIndx }
|
|
::= { ipNewCfgStaticArpTable 1 }
|
|
|
|
IpNewCfgStaticArpEntry ::= SEQUENCE {
|
|
ipNewCfgStaticArpIndx Integer32,
|
|
ipNewCfgStaticArpIp IpAddress,
|
|
ipNewCfgStaticArpMAC PhysAddress,
|
|
ipNewCfgStaticArpVlan Integer32,
|
|
ipNewCfgStaticArpPort Integer32,
|
|
ipNewCfgStaticArpAction INTEGER
|
|
}
|
|
|
|
ipNewCfgStaticArpIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the static ARP table."
|
|
::= { ipNewCfgStaticArpEntry 1}
|
|
|
|
ipNewCfgStaticArpIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address for the ARP entry."
|
|
::= { ipNewCfgStaticArpEntry 2}
|
|
|
|
ipNewCfgStaticArpMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address for the ARP entry."
|
|
::= { ipNewCfgStaticArpEntry 3 }
|
|
|
|
ipNewCfgStaticArpVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN for the ARP entry."
|
|
::= { ipNewCfgStaticArpEntry 4}
|
|
|
|
ipNewCfgStaticArpPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port for the ARP entry."
|
|
::= { ipNewCfgStaticArpEntry 5}
|
|
|
|
ipNewCfgStaticArpAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other is returned. Setting the value to anything other
|
|
than 2(delete) has no effect on the state of the row."
|
|
::= { ipNewCfgStaticArpEntry 6 }
|
|
|
|
ipStaticArpTableNextAvailableIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next available index in the Static ARP table."
|
|
::= { ipStaticArpCfg 4 }
|
|
|
|
--
|
|
-- IPv6 Static Neighbor Configuration
|
|
--
|
|
-- ipv6StaticNbrCfg OBJECT IDENTIFIER ::= { layer3Configs 22 }
|
|
ipv6StaticNbrTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of rows in the IPv6 Static Neighbor table."
|
|
::= { ipv6StaticNbrCfg 1 }
|
|
|
|
ipv6CurCfgStaticNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ipv6CurCfgStaticNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static IPv6 Neighbors in the current configuration block."
|
|
::= { ipv6StaticNbrCfg 2 }
|
|
|
|
ipv6CurCfgStaticNbrEntry OBJECT-TYPE
|
|
SYNTAX Ipv6CurCfgStaticNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IPv6 NBR table"
|
|
INDEX { ipv6CurCfgStaticNbrIndx }
|
|
::= { ipv6CurCfgStaticNbrTable 1 }
|
|
|
|
Ipv6CurCfgStaticNbrEntry ::= SEQUENCE {
|
|
ipv6CurCfgStaticNbrIndx Integer32,
|
|
ipv6CurCfgStaticNbrIpv6Addr DisplayString,
|
|
ipv6CurCfgStaticNbrMAC PhysAddress,
|
|
ipv6CurCfgStaticNbrVlan Integer32,
|
|
ipv6CurCfgStaticNbrPort Integer32
|
|
}
|
|
|
|
ipv6CurCfgStaticNbrIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of static IPv6 NBR table."
|
|
::= { ipv6CurCfgStaticNbrEntry 1}
|
|
|
|
ipv6CurCfgStaticNbrIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address for the static IPv6 NBR entry."
|
|
::= { ipv6CurCfgStaticNbrEntry 2}
|
|
|
|
ipv6CurCfgStaticNbrMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address for the static IPv6 NBR entry."
|
|
::= { ipv6CurCfgStaticNbrEntry 3 }
|
|
|
|
ipv6CurCfgStaticNbrVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN for the static IPv6 NBR entry."
|
|
::= { ipv6CurCfgStaticNbrEntry 4}
|
|
|
|
ipv6CurCfgStaticNbrPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port for the static IPv6 NBR entry."
|
|
::= { ipv6CurCfgStaticNbrEntry 5}
|
|
|
|
ipv6NewCfgStaticNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ipv6NewCfgStaticNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of static IPv6 Neighbors in the New configuration block."
|
|
::= { ipv6StaticNbrCfg 3 }
|
|
|
|
ipv6NewCfgStaticNbrEntry OBJECT-TYPE
|
|
SYNTAX Ipv6NewCfgStaticNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the static IPv6 NBR table"
|
|
INDEX { ipv6NewCfgStaticNbrIndx }
|
|
::= { ipv6NewCfgStaticNbrTable 1 }
|
|
|
|
Ipv6NewCfgStaticNbrEntry ::= SEQUENCE {
|
|
ipv6NewCfgStaticNbrIndx Integer32,
|
|
ipv6NewCfgStaticNbrIpv6Addr DisplayString,
|
|
ipv6NewCfgStaticNbrMAC PhysAddress,
|
|
ipv6NewCfgStaticNbrVlan Integer32,
|
|
ipv6NewCfgStaticNbrPort Integer32,
|
|
ipv6NewCfgStaticNbrAction INTEGER
|
|
}
|
|
|
|
ipv6NewCfgStaticNbrIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of static IPv6 NBR table."
|
|
::= { ipv6NewCfgStaticNbrEntry 1}
|
|
|
|
ipv6NewCfgStaticNbrIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address for the static IPv6 NBR entry."
|
|
::= { ipv6NewCfgStaticNbrEntry 2}
|
|
|
|
ipv6NewCfgStaticNbrMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address for the static IPv6 NBR entry."
|
|
::= { ipv6NewCfgStaticNbrEntry 3 }
|
|
|
|
ipv6NewCfgStaticNbrVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN for the static IPv6 NBR entry."
|
|
::= { ipv6NewCfgStaticNbrEntry 4}
|
|
|
|
ipv6NewCfgStaticNbrPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port for the static IPv6 NBR entry."
|
|
::= { ipv6NewCfgStaticNbrEntry 5}
|
|
|
|
ipv6NewCfgStaticNbrAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other is returned. Setting the value to anything other
|
|
than 2(delete) has no effect on the state of the row."
|
|
::= { ipv6NewCfgStaticNbrEntry 6 }
|
|
|
|
ipv6StaticNbrTableNextAvailableIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next available index in the static IPv6 NBR table."
|
|
::= { ipv6StaticNbrCfg 4 }
|
|
|
|
-- IP tunnel
|
|
|
|
ipTunnelCurCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpTunnelCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ip tunnels configuration in the Current Configuration Block."
|
|
::= { ipTunnelCfg 2 }
|
|
|
|
|
|
ipTunnelCurCfgEntry OBJECT-TYPE
|
|
SYNTAX IpTunnelCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the IP tunnel table"
|
|
INDEX { ipTunnelCurCfgId } ::= { ipTunnelCurCfgTable 1 }
|
|
|
|
IpTunnelCurCfgEntry ::= SEQUENCE {
|
|
ipTunnelCurCfgId DisplayString,
|
|
ipTunnelCurCfgIndex Integer32,
|
|
ipTunnelCurCfgState INTEGER,
|
|
ipTunnelCurCfgLocalMode INTEGER,
|
|
ipTunnelCurCfgLocalIfId Integer32,
|
|
ipTunnelCurCfgLocalVrId Integer32,
|
|
ipTunnelCurCfgLocalHaName DisplayString,
|
|
ipTunnelCurCfgIpVer INTEGER,
|
|
ipTunnelCurCfgIpVerMatch INTEGER,
|
|
ipTunnelCurCfgRemoteAddr4 IpAddress,
|
|
ipTunnelCurCfgRemoteAddr6 DisplayString,
|
|
ipTunnelCurCfgMatch IpAddress,
|
|
ipTunnelCurCfgMatch6 DisplayString,
|
|
ipTunnelCurCfgType INTEGER,
|
|
ipTunnelCurCfgDescription DisplayString,
|
|
ipTunnelCurCfgGreKey DisplayString,
|
|
ipTunnelCurCfgInnerLocalIfId Integer32
|
|
|
|
}
|
|
|
|
ipTunnelCurCfgId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP tunnel number for which the information is related."
|
|
::= { ipTunnelCurCfgEntry 1 }
|
|
|
|
ipTunnelCurCfgIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local index"
|
|
::= { ipTunnelCurCfgEntry 2 }
|
|
|
|
ipTunnelCurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or Disable the IP tunnel interface."
|
|
::= { ipTunnelCurCfgEntry 3 }
|
|
|
|
ipTunnelCurCfgLocalMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disabled(1),
|
|
if(2),
|
|
floating(3),
|
|
vr(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local address mode."
|
|
::= { ipTunnelCurCfgEntry 4 }
|
|
|
|
ipTunnelCurCfgLocalIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local address."
|
|
::= { ipTunnelCurCfgEntry 5 }
|
|
|
|
ipTunnelCurCfgLocalVrId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local address."
|
|
::= { ipTunnelCurCfgEntry 6 }
|
|
|
|
ipTunnelCurCfgLocalHaName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local HA id."
|
|
::= { ipTunnelCurCfgEntry 7 }
|
|
|
|
ipTunnelCurCfgIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address."
|
|
::= { ipTunnelCurCfgEntry 8 }
|
|
|
|
ipTunnelCurCfgIpVerMatch OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address of the egress match criteria."
|
|
::= { ipTunnelCurCfgEntry 9 }
|
|
|
|
|
|
ipTunnelCurCfgRemoteAddr4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote tunnel IP address."
|
|
::= { ipTunnelCurCfgEntry 10 }
|
|
|
|
ipTunnelCurCfgRemoteAddr6 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote tunnel IPv6 address. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipTunnelCurCfgEntry 11 }
|
|
|
|
ipTunnelCurCfgMatch OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The match criteria IP address."
|
|
::= { ipTunnelCurCfgEntry 12 }
|
|
|
|
ipTunnelCurCfgMatch6 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The match criteria IPv6 address. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipTunnelCurCfgEntry 13 }
|
|
|
|
ipTunnelCurCfgType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
-- vxlan(2),
|
|
ipinip(3),
|
|
gre(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP tunnel interface."
|
|
::= { ipTunnelCurCfgEntry 14 }
|
|
|
|
ipTunnelCurCfgDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The descriptive tunnel name."
|
|
::= { ipTunnelCurCfgEntry 15 }
|
|
|
|
ipTunnelCurCfgGreKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GRE tunnel key param."
|
|
::= { ipTunnelCurCfgEntry 16 }
|
|
|
|
ipTunnelCurCfgInnerLocalIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local address."
|
|
::= { ipTunnelCurCfgEntry 17 }
|
|
|
|
|
|
ipTunnelNewCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpTunnelNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ip tunnels configuration in the New Configuration Block."
|
|
::= { ipTunnelCfg 3 }
|
|
|
|
|
|
ipTunnelNewCfgEntry OBJECT-TYPE
|
|
SYNTAX IpTunnelNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the IP tunnel table"
|
|
INDEX { ipTunnelNewCfgId } ::= { ipTunnelNewCfgTable 1 }
|
|
|
|
IpTunnelNewCfgEntry ::= SEQUENCE {
|
|
ipTunnelNewCfgId DisplayString,
|
|
ipTunnelNewCfgIndex Integer32,
|
|
ipTunnelNewCfgState INTEGER,
|
|
ipTunnelNewCfgLocalMode INTEGER,
|
|
ipTunnelNewCfgLocalIfId Integer32,
|
|
ipTunnelNewCfgLocalVrId Integer32,
|
|
ipTunnelNewCfgLocalHaName DisplayString,
|
|
ipTunnelNewCfgIpVer INTEGER,
|
|
ipTunnelNewCfgIpVerMatch INTEGER,
|
|
ipTunnelNewCfgRemoteAddr4 IpAddress,
|
|
ipTunnelNewCfgRemoteAddr6 DisplayString,
|
|
ipTunnelNewCfgDelete INTEGER,
|
|
ipTunnelNewCfgMatch IpAddress,
|
|
ipTunnelNewCfgMatch6 DisplayString,
|
|
ipTunnelNewCfgType INTEGER,
|
|
ipTunnelNewCfgDescription DisplayString,
|
|
ipTunnelNewCfgGreKey DisplayString,
|
|
ipTunnelNewCfgInnerLocalIfId Integer32
|
|
|
|
|
|
}
|
|
|
|
ipTunnelNewCfgId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP tunnel number for which the information is related."
|
|
::= { ipTunnelNewCfgEntry 1 }
|
|
|
|
ipTunnelNewCfgIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel Index."
|
|
::= { ipTunnelNewCfgEntry 2 }
|
|
|
|
ipTunnelNewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or Disable the IP tunnel interface."
|
|
::= { ipTunnelNewCfgEntry 3 }
|
|
|
|
ipTunnelNewCfgLocalMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disabled(1),
|
|
if(2),
|
|
floating(3),
|
|
vr(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local address mode."
|
|
::= { ipTunnelNewCfgEntry 4 }
|
|
|
|
ipTunnelNewCfgLocalIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local address."
|
|
::= { ipTunnelNewCfgEntry 5 }
|
|
|
|
ipTunnelNewCfgLocalVrId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local address."
|
|
::= { ipTunnelNewCfgEntry 6 }
|
|
|
|
ipTunnelNewCfgLocalHaName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local HA id."
|
|
::= { ipTunnelNewCfgEntry 7 }
|
|
|
|
ipTunnelNewCfgIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address."
|
|
::= { ipTunnelNewCfgEntry 8 }
|
|
|
|
ipTunnelNewCfgIpVerMatch OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address of the egress match criteria."
|
|
::= { ipTunnelNewCfgEntry 9 }
|
|
|
|
ipTunnelNewCfgDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to the value of 2 (delete), the entire row is deleted.
|
|
When read, other(1) is returned. Setting the value to anything
|
|
other than 2(delete) has no effect on the state of the row."
|
|
::= { ipTunnelNewCfgEntry 10 }
|
|
|
|
ipTunnelNewCfgRemoteAddr4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote tunnel IP address."
|
|
::= { ipTunnelNewCfgEntry 11 }
|
|
|
|
ipTunnelNewCfgRemoteAddr6 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote tunnel IPv6 address. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipTunnelNewCfgEntry 12 }
|
|
|
|
ipTunnelNewCfgMatch OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The match criteria IP address."
|
|
::= { ipTunnelNewCfgEntry 13 }
|
|
|
|
ipTunnelNewCfgMatch6 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The match criteria IPv6 address. Address should be 4-byte
|
|
haxadecimal colon notation.
|
|
Valid IPv6 address should be in any of the following forms
|
|
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
|
|
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
|
|
::= { ipTunnelNewCfgEntry 14 }
|
|
|
|
ipTunnelNewCfgType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
-- vxlan(2),
|
|
ipinip(3),
|
|
gre(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP tunnel interface."
|
|
::= { ipTunnelNewCfgEntry 15 }
|
|
|
|
ipTunnelNewCfgDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The descriptive tunnel name."
|
|
::= { ipTunnelNewCfgEntry 16 }
|
|
|
|
ipTunnelNewCfgGreKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GRE tunnel key param."
|
|
::= { ipTunnelNewCfgEntry 17 }
|
|
|
|
ipTunnelNewCfgInnerLocalIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local inner address."
|
|
::= { ipTunnelNewCfgEntry 18 }
|
|
|
|
-- Statistics
|
|
|
|
-- RIP Statistics Group
|
|
|
|
ripStatInPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of good RIPv1 packets received.
|
|
RIPv1 mibs are not supported anymore."
|
|
::= { ripStats 1 }
|
|
|
|
ripStatOutPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv1 packets transmitted.
|
|
RIPv1 mibs are not supported anymore."
|
|
::= { ripStats 2 }
|
|
|
|
ripStatInErrorPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of error RIPv1 packets received.
|
|
RIPv1 mibs are not supported anymore."
|
|
::= { ripStats 3 }
|
|
|
|
ripStatRoutesAgedOut OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv1 routes which have aged out.
|
|
RIPv1 mibs are not supported anymore."
|
|
::= { ripStats 4 }
|
|
|
|
-- RIPv2 Statistics
|
|
|
|
ripStatInPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 packets received."
|
|
::= { rip2Stats 1 }
|
|
|
|
ripStatOutPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 packets transmitted."
|
|
::= { rip2Stats 2 }
|
|
|
|
ripStatInRequestPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 requests received."
|
|
::= { rip2Stats 3 }
|
|
|
|
ripStatInResponsePkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 response received."
|
|
::= { rip2Stats 4 }
|
|
|
|
ripStatOutRequestPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 requests transmitted."
|
|
::= { rip2Stats 5 }
|
|
|
|
ripStatOutResponsePkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 responses transmitted."
|
|
::= { rip2Stats 6 }
|
|
|
|
ripStatRouteTimeout OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 route timeouts."
|
|
::= { rip2Stats 7 }
|
|
|
|
ripStatInBadSizePkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bad size RIPv2 packets received."
|
|
::= { rip2Stats 8 }
|
|
|
|
ripStatInBadVersion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 bad versions received."
|
|
::= { rip2Stats 9 }
|
|
|
|
ripStatInBadZeros OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 bad zeros received."
|
|
::= { rip2Stats 10 }
|
|
|
|
ripStatInBadSourcePort OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 bad source port received."
|
|
::= { rip2Stats 11 }
|
|
|
|
ripStatInBadSourceIP OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 bad source IP received."
|
|
::= { rip2Stats 12 }
|
|
|
|
ripStatInSelfRcvPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of RIPv2 packets from self received."
|
|
::= { rip2Stats 13 }
|
|
|
|
-- TCP Statistics Group
|
|
|
|
tcpStatCurConn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of outstanding TCP sessions that are currently opened."
|
|
::= { tcpStats 1 }
|
|
|
|
tcpStatCurInConn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of remotely-initiated TCP connections."
|
|
::= { tcpStats 2 }
|
|
|
|
tcpStatCurOutConn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of switch-originated TCP connection requests."
|
|
::= { tcpStats 3 }
|
|
|
|
-- ARP Statistics Group
|
|
|
|
arpStatEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of ARP entries."
|
|
::= { arpStats 1 }
|
|
|
|
arpStatHighWater OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest number of ARP entries."
|
|
::= { arpStats 2 }
|
|
|
|
arpStatMaxEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of ARP entries."
|
|
::= { arpStats 3 }
|
|
|
|
-- ARP SP Statistics Group
|
|
|
|
arpSpStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArpSpStatsTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ARP SP Stats."
|
|
::= { arpStats 4 }
|
|
|
|
arpSpStatsTableEntry OBJECT-TYPE
|
|
SYNTAX ArpSpStatsTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the ARP SP stats table."
|
|
INDEX { arpSpStatSpIndex }
|
|
::= { arpSpStatsTable 1 }
|
|
|
|
ArpSpStatsTableEntry ::= SEQUENCE {
|
|
arpSpStatSpIndex Integer32,
|
|
arpSpStatEntries Gauge32,
|
|
arpSpStatHighWater Gauge32,
|
|
arpSpStatMaxEntries Gauge32
|
|
}
|
|
|
|
arpSpStatSpIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SP index."
|
|
::= { arpSpStatsTableEntry 1 }
|
|
|
|
arpSpStatEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of SP ARP entries."
|
|
::= { arpSpStatsTableEntry 2 }
|
|
|
|
arpSpStatHighWater OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest number of SP ARP entries."
|
|
::= { arpSpStatsTableEntry 3 }
|
|
|
|
arpSpStatMaxEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of SP ARP entries."
|
|
::= { arpSpStatsTableEntry 4 }
|
|
|
|
-- ROUTE Statistics Group
|
|
|
|
routeStatEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of IP routes."
|
|
::= { routeStats 1 }
|
|
|
|
routeStatHighWater OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest number of IP routes."
|
|
::= { routeStats 2 }
|
|
|
|
routeStatMaxEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of IP routes."
|
|
::= { routeStats 3 }
|
|
|
|
-- DNS Statistics
|
|
|
|
dnsStatInGoodDnsRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of DNS request packets which are received."
|
|
::= { dnsStats 1 }
|
|
|
|
dnsStatInBadDnsRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of DNS request packets received that were dropped."
|
|
::= { dnsStats 2 }
|
|
|
|
dnsStatOutDnsRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of DNS response packets that have been transmitted."
|
|
::= { dnsStats 3 }
|
|
|
|
-- The VRRP Statistics
|
|
|
|
vrrpStatInAdvers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of good VRRP advertisements which are received."
|
|
::= { vrrpStats 1 }
|
|
|
|
vrrpStatOutAdvers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of good VRRP advertisements which are transmitted."
|
|
::= { vrrpStats 2 }
|
|
|
|
vrrpStatOutBadAdvers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP advertisements which are received."
|
|
::= { vrrpStats 3 }
|
|
|
|
vrrpStatBadPassword OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP password."
|
|
::= { vrrpStats 4 }
|
|
|
|
vrrpStatBadVersion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP version which are received."
|
|
::= { vrrpStats 5 }
|
|
|
|
vrrpStatBadVrid OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP VR id which are received."
|
|
::= { vrrpStats 6 }
|
|
|
|
vrrpStatBadAddress OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP address which are received."
|
|
::= { vrrpStats 7 }
|
|
|
|
vrrpStatBadData OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP data which are received."
|
|
::= { vrrpStats 8 }
|
|
|
|
vrrpStatBadInterval OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP Interval which are received."
|
|
::= { vrrpStats 9 }
|
|
|
|
vrrpStatBadHaid OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP Haid which are received."
|
|
::= { vrrpStats 10 }
|
|
|
|
-- Clear Statistics for ip and ip interface
|
|
ipClearStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
clear(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to clear(2) results in clearing the IP statistics."
|
|
::= { clearStats 1 }
|
|
|
|
ifStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of Interface Statistics."
|
|
::= { clearStats 2 }
|
|
|
|
ifStatsEntry OBJECT-TYPE
|
|
SYNTAX IfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Interface statistics."
|
|
INDEX { ifStatsIndex }
|
|
::= { ifStatsTable 1 }
|
|
|
|
IfStatsEntry ::= SEQUENCE {
|
|
ifStatsIndex Integer32,
|
|
ifClearStats INTEGER
|
|
}
|
|
|
|
ifStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the IP interface for which these statistics apply."
|
|
::= { ifStatsEntry 1 }
|
|
|
|
ifClearStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
clear(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to clear(2) results in clearing the statistics for this
|
|
IP interface (if) stats."
|
|
::= { ifStatsEntry 2 }
|
|
|
|
urlfClearStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
clear(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to clear(2) results in clearing the URL Filtering statistics."
|
|
::= { clearStats 3 }
|
|
|
|
tunelClearStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
clear(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to clear(2) results in clearing the IP Tunnel statistics."
|
|
::= { clearStats 4 }
|
|
|
|
-- Ospf Statistics
|
|
|
|
-- Ospf Statistics for all interfaces and OSPF areas
|
|
ospfGeneralStats OBJECT IDENTIFIER ::= { ospfStats 1 }
|
|
ospfCumRxTxStats OBJECT IDENTIFIER ::= { ospfGeneralStats 1 }
|
|
ospfCumNbrChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 2 }
|
|
ospfCumIntfChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 3 }
|
|
ospfTimersKickOffStats OBJECT IDENTIFIER ::= { ospfGeneralStats 4 }
|
|
|
|
-- Ospf Statistics / Area
|
|
ospfArea OBJECT IDENTIFIER ::= { ospfStats 2 }
|
|
|
|
ospfAreaRxTxStats OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfAreaRxTxStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Area Rx/Tx Statistics."
|
|
::= { ospfArea 1 }
|
|
|
|
ospfAreaRxTxStatsEntry OBJECT-TYPE
|
|
SYNTAX OspfAreaRxTxStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Tx packet Statistics about a OSPF area."
|
|
INDEX { ospfAreaRxTxIndex }
|
|
::= { ospfAreaRxTxStats 1 }
|
|
|
|
OspfAreaRxTxStatsEntry ::= SEQUENCE {
|
|
ospfAreaRxTxIndex Integer32,
|
|
ospfAreaRxPkts Counter32,
|
|
ospfAreaTxPkts Counter32,
|
|
ospfAreaRxHello Counter32,
|
|
ospfAreaTxHello Counter32,
|
|
ospfAreaRxDatabase Counter32,
|
|
ospfAreaTxDatabase Counter32,
|
|
ospfAreaRxlsReqs Counter32,
|
|
ospfAreaTxlsReqs Counter32,
|
|
ospfAreaRxlsAcks Counter32,
|
|
ospfAreaTxlsAcks Counter32,
|
|
ospfAreaRxlsUpdates Counter32,
|
|
ospfAreaTxlsUpdates Counter32
|
|
}
|
|
|
|
ospfAreaRxTxIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the ospf Area for which these statistics apply."
|
|
::= { ospfAreaRxTxStatsEntry 1 }
|
|
|
|
ospfAreaRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of OSPF packets received in this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 2 }
|
|
|
|
ospfAreaTxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of OSPF packets transmitted in this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 3 }
|
|
|
|
ospfAreaRxHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets received in this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 4 }
|
|
|
|
ospfAreaTxHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets transmitted in this OSPF
|
|
area."
|
|
::= { ospfAreaRxTxStatsEntry 5 }
|
|
|
|
ospfAreaRxDatabase OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Database Description packets transmitted
|
|
for this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 6 }
|
|
|
|
ospfAreaTxDatabase OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Database Description packets transmitted
|
|
for this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 7 }
|
|
|
|
ospfAreaRxlsReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Request packets received for
|
|
this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 8 }
|
|
|
|
ospfAreaTxlsReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Request packets transmitted for
|
|
this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 9 }
|
|
|
|
ospfAreaRxlsAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Acknowledgement packets received for
|
|
this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 10 }
|
|
|
|
ospfAreaTxlsAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Acknowledgement packets transmitted
|
|
for this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 11 }
|
|
|
|
ospfAreaRxlsUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Update packets received for
|
|
this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 12 }
|
|
|
|
ospfAreaTxlsUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Update packets transmitted for
|
|
this OSPF area."
|
|
::= { ospfAreaRxTxStatsEntry 13 }
|
|
|
|
|
|
ospfAreaNbrChangeStats OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfAreaNbrChangeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Area Neighbour Statistics."
|
|
::= { ospfArea 2 }
|
|
|
|
ospfAreaNbrChangeStatsEntry OBJECT-TYPE
|
|
SYNTAX OspfAreaNbrChangeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Area Neighbour Change Statistics about a OSPF area."
|
|
INDEX { ospfAreaNbrIndex }
|
|
::= { ospfAreaNbrChangeStats 1 }
|
|
|
|
OspfAreaNbrChangeStatsEntry ::= SEQUENCE {
|
|
ospfAreaNbrIndex Integer32,
|
|
ospfAreaNbrhello Counter32,
|
|
ospfAreaNbrStart Counter32,
|
|
ospfAreaNbrAdjointOk Counter32,
|
|
ospfAreaNbrNegotiationDone Counter32,
|
|
ospfAreaNbrExchangeDone Counter32,
|
|
ospfAreaNbrBadRequests Counter32,
|
|
ospfAreaNbrBadSequence Counter32,
|
|
ospfAreaNbrLoadingDone Counter32,
|
|
ospfAreaNbrN1way Counter32,
|
|
ospfAreaNbrRstAd Counter32,
|
|
ospfAreaNbrDown Counter32,
|
|
ospfAreaNbrN2way Counter32
|
|
}
|
|
|
|
ospfAreaNbrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the ospf Area for which these statistics apply."
|
|
::= { ospfAreaNbrChangeStatsEntry 1 }
|
|
|
|
ospfAreaNbrhello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets received from neighbours
|
|
in this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 2 }
|
|
|
|
ospfAreaNbrStart OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of neighbours in this state (i.e. an indication
|
|
that Hello packets should now be sent to the neighbour at intervals
|
|
of HelloInterval seconds.) in this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 3 }
|
|
|
|
ospfAreaNbrAdjointOk OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of decisions to be made (again) as to whether
|
|
an adjacency should be established/maintained with the neighbour.
|
|
for this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 4 }
|
|
|
|
ospfAreaNbrNegotiationDone OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of neighbours in this state wherein the
|
|
Master/slave relationship has been negotiated, and sequence
|
|
numbers have been exchanged, for this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 5 }
|
|
|
|
ospfAreaNbrExchangeDone OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of neighbours in this state (i.e. in an
|
|
adjacency's final state) having transimitted a full sequence
|
|
of Database Description packets, for this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 6 }
|
|
|
|
ospfAreaNbrBadRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of Link State Requests which have been received
|
|
for a link state advertisement not contained in the database across
|
|
this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 7 }
|
|
|
|
ospfAreaNbrBadSequence OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Database Description packets which have been
|
|
received that either
|
|
a) has an unexpected DD sequence number
|
|
b) Unexpectedly has the init bit set
|
|
c) Has an options field differing from the last Options field
|
|
received in a Database Description packet.
|
|
Any of these conditions indicate that some error has occured during
|
|
adjacency establishment for this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 8 }
|
|
|
|
ospfAreaNbrLoadingDone OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of link state updates received for all
|
|
out-of-date portions of the database in this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 9 }
|
|
|
|
ospfAreaNbrN1way OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets received from neighbours, in
|
|
which this router is not mentioned in this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 10 }
|
|
|
|
ospfAreaNbrRstAd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the Neighbour adjacency has been reset
|
|
across this OPSF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 11 }
|
|
|
|
ospfAreaNbrDown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Neighbouring routers down (i.e. in the initial
|
|
state of a neighbour conversation.) in this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 12 }
|
|
|
|
ospfAreaNbrN2way OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets received from neighbours, in
|
|
which this router is mentioned in this OSPF area."
|
|
::= { ospfAreaNbrChangeStatsEntry 13 }
|
|
|
|
ospfAreaChangeStats OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfAreaChangeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Area Change Statistics."
|
|
::= { ospfArea 3 }
|
|
|
|
ospfAreaChangeStatsEntry OBJECT-TYPE
|
|
SYNTAX OspfAreaChangeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Area Change Statistics about a OSPF area."
|
|
INDEX { ospfAreaIntfIndex }
|
|
::= { ospfAreaChangeStats 1 }
|
|
|
|
OspfAreaChangeStatsEntry ::= SEQUENCE {
|
|
ospfAreaIntfIndex Integer32,
|
|
ospfAreaIntfHello Counter32,
|
|
ospfAreaIntfDown Counter32,
|
|
ospfAreaIntfLoop Counter32,
|
|
ospfAreaIntfUnloop Counter32,
|
|
ospfAreaIntfWaitTimer Counter32,
|
|
ospfAreaIntfBackup Counter32,
|
|
ospfAreaIntfNbrChange Counter32
|
|
}
|
|
|
|
ospfAreaIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the OSPF Area for which these statistics apply."
|
|
::= { ospfAreaChangeStatsEntry 1 }
|
|
|
|
ospfAreaIntfHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets sent on this OSPF area."
|
|
::= { ospfAreaChangeStatsEntry 2 }
|
|
|
|
ospfAreaIntfDown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of interfaces down in this OSPF area."
|
|
::= { ospfAreaChangeStatsEntry 3 }
|
|
|
|
ospfAreaIntfLoop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of interfaces no longer connected to
|
|
the attatched network in this OSPF area."
|
|
::= { ospfAreaChangeStatsEntry 4 }
|
|
|
|
ospfAreaIntfUnloop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of interfaces connected to the attatched
|
|
network in this OSPF area.."
|
|
::= { ospfAreaChangeStatsEntry 5 }
|
|
|
|
|
|
ospfAreaIntfWaitTimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the Wait Timer has been fired,
|
|
(indicating the end of the waiting period that is required
|
|
before electing a (Backup) Designated Router) for this
|
|
OSPF area."
|
|
::= { ospfAreaChangeStatsEntry 6 }
|
|
|
|
ospfAreaIntfBackup OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Backup Designated Routers on the attatched
|
|
network for this OSPF area."
|
|
::= { ospfAreaChangeStatsEntry 7 }
|
|
|
|
|
|
ospfAreaIntfNbrChange OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of changes in the set of bidirectional neighbours
|
|
associated with the interface in this OSPF area."
|
|
::= { ospfAreaChangeStatsEntry 8 }
|
|
|
|
ospfAreaErrorStats OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfAreaErrorStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Area Error Statistics."
|
|
::= { ospfArea 4 }
|
|
|
|
ospfAreaErrorStatsEntry OBJECT-TYPE
|
|
SYNTAX OspfAreaErrorStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Error Statistics for an OSPF area."
|
|
INDEX { ospfAreaErrIndex }
|
|
::= { ospfAreaErrorStats 1 }
|
|
|
|
OspfAreaErrorStatsEntry ::= SEQUENCE {
|
|
ospfAreaErrIndex Integer32,
|
|
ospfAreaErrAuthFailure Counter32,
|
|
ospfAreaErrNetmaskMismatch Counter32,
|
|
ospfAreaErrHelloMismatch Counter32,
|
|
ospfAreaErrDeadMismatch Counter32,
|
|
ospfAreaErrOptionsMismatch Counter32,
|
|
ospfAreaErrUnknownNbr Counter32
|
|
}
|
|
|
|
ospfAreaErrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the OSPF Area for which these statistics apply."
|
|
::= { ospfAreaErrorStatsEntry 1 }
|
|
|
|
ospfAreaErrAuthFailure OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a wrong password in
|
|
this area."
|
|
::= { ospfAreaErrorStatsEntry 2 }
|
|
|
|
ospfAreaErrNetmaskMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a wrong netmask in
|
|
this area."
|
|
::= { ospfAreaErrorStatsEntry 3 }
|
|
|
|
ospfAreaErrHelloMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a different hello interval
|
|
in this area."
|
|
::= { ospfAreaErrorStatsEntry 4 }
|
|
|
|
ospfAreaErrDeadMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a different dead interval
|
|
in this area."
|
|
::= { ospfAreaErrorStatsEntry 5 }
|
|
|
|
ospfAreaErrOptionsMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a different options
|
|
in this area."
|
|
::= { ospfAreaErrorStatsEntry 6 }
|
|
|
|
ospfAreaErrUnknownNbr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from an unknown neighbour
|
|
in this area."
|
|
::= { ospfAreaErrorStatsEntry 7 }
|
|
|
|
-- Ospf Statistics / Interface
|
|
ospfInterface OBJECT IDENTIFIER ::= { ospfStats 3 }
|
|
|
|
ospfIntfRxTxStats OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfIntfRxTxStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Interface Rx/Tx packet Statistics."
|
|
::= { ospfInterface 1 }
|
|
|
|
ospfIntfRxTxStatsEntry OBJECT-TYPE
|
|
SYNTAX OspfIntfRxTxStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF interface Rx/Tx packet statistics."
|
|
INDEX { ospfIntfRxTxIndex }
|
|
::= { ospfIntfRxTxStats 1 }
|
|
|
|
OspfIntfRxTxStatsEntry ::= SEQUENCE {
|
|
ospfIntfRxTxIndex Integer32,
|
|
ospfIntfRxPkts Counter32,
|
|
ospfIntfTxPkts Counter32,
|
|
ospfIntfRxHello Counter32,
|
|
ospfIntfTxHello Counter32,
|
|
ospfIntfRxDatabase Counter32,
|
|
ospfIntfTxDatabase Counter32,
|
|
ospfIntfRxlsReqs Counter32,
|
|
ospfIntfTxlsReqs Counter32,
|
|
ospfIntfRxlsAcks Counter32,
|
|
ospfIntfTxlsAcks Counter32,
|
|
ospfIntfRxlsUpdates Counter32,
|
|
ospfIntfTxlsUpdates Counter32
|
|
}
|
|
|
|
ospfIntfRxTxIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface for which these statistics apply."
|
|
::= { ospfIntfRxTxStatsEntry 1 }
|
|
|
|
ospfIntfRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of OSPF packets received for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 2 }
|
|
|
|
ospfIntfTxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of OSPF packets transmitted for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 3 }
|
|
|
|
ospfIntfRxHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets received
|
|
for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 4 }
|
|
|
|
ospfIntfTxHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets transmitted
|
|
for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 5 }
|
|
|
|
ospfIntfRxDatabase OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Database Description packets received
|
|
for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 6 }
|
|
|
|
ospfIntfTxDatabase OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Database Description packets transmitted
|
|
for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 7 }
|
|
|
|
ospfIntfRxlsReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Request packets received
|
|
for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 8 }
|
|
|
|
ospfIntfTxlsReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Request packets transmitted
|
|
for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 9 }
|
|
|
|
ospfIntfRxlsAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Acknowledgement packets received
|
|
for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 10 }
|
|
|
|
ospfIntfTxlsAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Acknowledgement packets transmitted
|
|
for this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 11 }
|
|
|
|
ospfIntfRxlsUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Update packets received for
|
|
this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 12 }
|
|
|
|
ospfIntfTxlsUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Update packets transmitted for
|
|
this OSPF interface."
|
|
::= { ospfIntfRxTxStatsEntry 13 }
|
|
|
|
|
|
ospfIntfNbrChangeStats OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfIntfNbrChangeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Interface Neighbour change Statistics."
|
|
::= { ospfInterface 2 }
|
|
|
|
ospfIntfNbrChangeStatsEntry OBJECT-TYPE
|
|
SYNTAX OspfIntfNbrChangeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF interface Neighbour Change statistics."
|
|
INDEX { ospfIntfNbrIndex }
|
|
::= { ospfIntfNbrChangeStats 1 }
|
|
|
|
OspfIntfNbrChangeStatsEntry ::= SEQUENCE {
|
|
ospfIntfNbrIndex Integer32,
|
|
ospfIntfNbrhello Counter32,
|
|
ospfIntfNbrStart Counter32,
|
|
ospfIntfNbrAdjointOk Counter32,
|
|
ospfIntfNbrNegotiationDone Counter32,
|
|
ospfIntfNbrExchangeDone Counter32,
|
|
ospfIntfNbrBadRequests Counter32,
|
|
ospfIntfNbrBadSequence Counter32,
|
|
ospfIntfNbrLoadingDone Counter32,
|
|
ospfIntfNbrN1way Counter32,
|
|
ospfIntfNbrRstAd Counter32,
|
|
ospfIntfNbrDown Counter32,
|
|
ospfIntfNbrN2way Counter32
|
|
}
|
|
|
|
ospfIntfNbrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the OSPF Interface for which these statistics apply."
|
|
::= { ospfIntfNbrChangeStatsEntry 1 }
|
|
|
|
ospfIntfNbrhello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets received from neighbours
|
|
in this OSPF interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 2 }
|
|
|
|
ospfIntfNbrStart OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of neighbours in this state (i.e. an indication
|
|
that Hello packets should now be sent to the neighbour at intervals
|
|
of HelloInterval seconds.) in this OSPF interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 3 }
|
|
|
|
ospfIntfNbrAdjointOk OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of decisions to be made (again) as to whether
|
|
an adjacency should be established/maintained with the neighbour.
|
|
for this OSPF interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 4 }
|
|
|
|
ospfIntfNbrNegotiationDone OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of neighbours in this state wherein the
|
|
Master/slave relationship has been negotiated, and sequence
|
|
numbers have been exchanged, for this OSPF interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 5 }
|
|
|
|
ospfIntfNbrExchangeDone OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of neighbours in this state (i.e. in an
|
|
adjacency's final state) having transimitted a full sequence
|
|
of Database Description packets, for this OSPF interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 6 }
|
|
|
|
ospfIntfNbrBadRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link State Requests which have been received
|
|
for a link state advertisement not contained in the database for
|
|
this interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 7 }
|
|
|
|
ospfIntfNbrBadSequence OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Database Description packets which have been
|
|
received that either
|
|
a) has an unexpected DD sequence number
|
|
b) Unexpectedly has the init bit set
|
|
c) Has an options field differing from the last Options field
|
|
received in a Database Description packet.
|
|
Any of these conditions indicate that some error has occured during
|
|
adjacency establishment for this interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 8 }
|
|
|
|
ospfIntfNbrLoadingDone OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of link state updates received for all
|
|
out-of-date portions of the database for this OSPF interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 9 }
|
|
|
|
ospfIntfNbrN1way OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets received from neighbours, in
|
|
which this router is not mentioned for this OSPF interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 10 }
|
|
|
|
ospfIntfNbrRstAd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of times the Neighbour adjacency has been reset
|
|
on this interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 11 }
|
|
|
|
ospfIntfNbrDown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Neighbouring routers down (i.e. in the initial
|
|
state of a neighbour conversation.) for this interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 12 }
|
|
|
|
ospfIntfNbrN2way OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets received from neighbours, in
|
|
which this router is mentioned for this OSPF interface."
|
|
::= { ospfIntfNbrChangeStatsEntry 13 }
|
|
|
|
ospfIntfChangeStats OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfIntfChangeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Interface change Statistics."
|
|
::= { ospfInterface 3 }
|
|
|
|
ospfIntfChangeStatsEntry OBJECT-TYPE
|
|
SYNTAX OspfIntfChangeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF interface Change statistics."
|
|
INDEX { ospfIntfIndex }
|
|
::= { ospfIntfChangeStats 1 }
|
|
|
|
OspfIntfChangeStatsEntry ::= SEQUENCE {
|
|
ospfIntfIndex Integer32,
|
|
ospfIntfHello Counter32,
|
|
ospfIntfDown Counter32,
|
|
ospfIntfLoop Counter32,
|
|
ospfIntfUnloop Counter32,
|
|
ospfIntfWaitTimer Counter32,
|
|
ospfIntfBackup Counter32,
|
|
ospfIntfNbrChange Counter32
|
|
}
|
|
|
|
ospfIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the OSPF Interface for which these statistics apply."
|
|
::= { ospfIntfChangeStatsEntry 1 }
|
|
|
|
ospfIntfHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Hello packets sent by this interface."
|
|
::= { ospfIntfChangeStatsEntry 2 }
|
|
|
|
ospfIntfDown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the interface was down."
|
|
::= { ospfIntfChangeStatsEntry 3 }
|
|
|
|
ospfIntfLoop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the interface was no longer connected to
|
|
the attatched network."
|
|
::= { ospfIntfChangeStatsEntry 4 }
|
|
|
|
ospfIntfUnloop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the interface, connected back to
|
|
the attatched network."
|
|
::= { ospfIntfChangeStatsEntry 5 }
|
|
|
|
ospfIntfWaitTimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the Wait Timer has been fired,
|
|
(indicating the end of the waiting period that is required
|
|
before electing a (Backup) Designated Router) for this
|
|
OSPF interface."
|
|
::= { ospfIntfChangeStatsEntry 6 }
|
|
|
|
ospfIntfBackup OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Backup Designated Routers on the attatched
|
|
network for this OSPF interface."
|
|
::= { ospfIntfChangeStatsEntry 7 }
|
|
|
|
ospfIntfNbrChange OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of changes in the set of bidirectional neighbours
|
|
associated with the interface for this OSPF interface."
|
|
::= { ospfIntfChangeStatsEntry 8 }
|
|
|
|
ospfIntfErrorStats OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfIntfErrorStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Interface Error Statistics."
|
|
::= { ospfInterface 4 }
|
|
|
|
ospfIntfErrorStatsEntry OBJECT-TYPE
|
|
SYNTAX OspfIntfErrorStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Error Statistics for an OSPF area."
|
|
INDEX { ospfIntfErrIndex }
|
|
::= { ospfIntfErrorStats 1 }
|
|
|
|
OspfIntfErrorStatsEntry ::= SEQUENCE {
|
|
ospfIntfErrIndex Integer32,
|
|
ospfIntfErrAuthFailure Counter32,
|
|
ospfIntfErrNetmaskMismatch Counter32,
|
|
ospfIntfErrHelloMismatch Counter32,
|
|
ospfIntfErrDeadMismatch Counter32,
|
|
ospfIntfErrOptionsMismatch Counter32,
|
|
ospfIntfErrUnknownNbr Counter32
|
|
}
|
|
|
|
ospfIntfErrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the OSPF Intf for which these statistics apply."
|
|
::= { ospfIntfErrorStatsEntry 1 }
|
|
|
|
ospfIntfErrAuthFailure OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a wrong password in
|
|
this area."
|
|
::= { ospfIntfErrorStatsEntry 2 }
|
|
|
|
ospfIntfErrNetmaskMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a wrong netmask in
|
|
this area."
|
|
::= { ospfIntfErrorStatsEntry 3 }
|
|
|
|
ospfIntfErrHelloMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a different hello interval
|
|
in this area."
|
|
::= { ospfIntfErrorStatsEntry 4 }
|
|
|
|
ospfIntfErrDeadMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a different dead interval
|
|
in this area."
|
|
::= { ospfIntfErrorStatsEntry 5 }
|
|
|
|
ospfIntfErrOptionsMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a different options
|
|
in this area."
|
|
::= { ospfIntfErrorStatsEntry 6 }
|
|
|
|
ospfIntfErrUnknownNbr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received from an unknown neighbour
|
|
in this area."
|
|
::= { ospfIntfErrorStatsEntry 7 }
|
|
|
|
-- Ospf General Statistics contains the cumulative stats for all
|
|
-- areas / interfaces
|
|
ospfCumRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all OSPF packets received on all OSPF areas
|
|
and interfaces."
|
|
::= { ospfCumRxTxStats 1 }
|
|
|
|
ospfCumTxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all OSPF packets transmitted on all OSPF areas
|
|
and interfaces."
|
|
::= { ospfCumRxTxStats 2 }
|
|
|
|
ospfCumRxHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Hello packets received on all OSPF areas
|
|
and interfaces."
|
|
::= { ospfCumRxTxStats 3 }
|
|
|
|
ospfCumTxHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Hello packets transmitted on all OSPF areas
|
|
and interfaces."
|
|
::= { ospfCumRxTxStats 4 }
|
|
|
|
ospfCumRxDatabase OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Database Description packets received on
|
|
all OSPF areas and interfaces."
|
|
::= { ospfCumRxTxStats 5 }
|
|
|
|
ospfCumTxDatabase OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Database Description packets transmitted on
|
|
all OSPF areas and interfaces."
|
|
::= { ospfCumRxTxStats 6 }
|
|
|
|
ospfCumRxlsReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Link State Request packets received on
|
|
all OSPF areas and interfaces."
|
|
::= { ospfCumRxTxStats 7 }
|
|
|
|
ospfCumTxlsReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Link State Request packets transmitted on
|
|
all OSPF areas and interfaces."
|
|
::= { ospfCumRxTxStats 8 }
|
|
|
|
ospfCumRxlsAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Link State Acknowledgement packets received
|
|
on all OSPF areas and interfaces."
|
|
::= { ospfCumRxTxStats 9 }
|
|
|
|
ospfCumTxlsAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Link State Acknowledgement packets transmitted
|
|
on all OSPF areas and interfaces."
|
|
::= { ospfCumRxTxStats 10 }
|
|
|
|
ospfCumRxlsUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Link State Update packets received
|
|
on all OSPF areas and interfaces."
|
|
::= { ospfCumRxTxStats 11 }
|
|
|
|
ospfCumTxlsUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Link State Update packets transmitted
|
|
on all OSPF areas and interfaces."
|
|
::= { ospfCumRxTxStats 12 }
|
|
|
|
ospfCumNbrhello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of all Hello packets received from neighbours
|
|
on all OSPF areas and interfaces."
|
|
::= { ospfCumNbrChangeStats 1 }
|
|
|
|
ospfCumNbrStart OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of neighbours in this state (i.e. an indication
|
|
that Hello packets should now be sent to the neighbour at intervals
|
|
of HelloInterval seconds.) across all OSPF areas and interfaces."
|
|
::= { ospfCumNbrChangeStats 2 }
|
|
|
|
ospfCumNbrAdjointOk OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of decisions to be made (again) as to whether
|
|
an adjacency should be established/maintained with the neighbour
|
|
across all OSPF areas and interfaces."
|
|
::= { ospfCumNbrChangeStats 3 }
|
|
|
|
ospfCumNbrNegotiationDone OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of neighbours in this state wherein the
|
|
Master/slave relationship has been negotiated, and sequence
|
|
numbers have been exchanged, across all OSPF areas and
|
|
interfaces."
|
|
::= { ospfCumNbrChangeStats 4 }
|
|
|
|
ospfCumNbrExchangeDone OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of neighbours in this state (i.e. in an
|
|
adjacency's final state) having transimitted a full sequence
|
|
of Database Description packets, across all OSPF areas
|
|
and interfaces."
|
|
::= { ospfCumNbrChangeStats 5 }
|
|
|
|
ospfCumNbrBadRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of Link State Requests which have been received
|
|
for a link state advertisement not contained in the database across
|
|
all interfaces and OSPF areas."
|
|
::= { ospfCumNbrChangeStats 6 }
|
|
|
|
ospfCumNbrBadSequence OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of Database Description packets which have been
|
|
received that either
|
|
a) has an unexpected DD sequence number
|
|
b) Unexpectedly has the init bit set
|
|
c) Has an options field differing from the last Options field
|
|
received in a Database Description packet.
|
|
Any of these conditions indicate that some error has occured during
|
|
adjacency establishment for all OSPF areas and interfaces."
|
|
::= { ospfCumNbrChangeStats 7 }
|
|
|
|
ospfCumNbrLoadingDone OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of link state updates received for all
|
|
out-of-date portions of the database across all OSPF areas
|
|
and interfaces."
|
|
::= { ospfCumNbrChangeStats 8 }
|
|
|
|
ospfCumNbrN1way OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of Hello packets received from neighbours, in
|
|
which this router is not mentioned across all OSPF interfaces
|
|
and areas."
|
|
::= { ospfCumNbrChangeStats 9 }
|
|
|
|
ospfCumNbrRstAd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of times the Neighbour adjacency has been reset
|
|
across all OPSF areas and interfaces."
|
|
::= { ospfCumNbrChangeStats 10 }
|
|
|
|
ospfCumNbrDown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Neighbouring routers down (i.e. in the initial
|
|
state of a neighbour conversation.) across all OSPF areas and
|
|
interfaces."
|
|
::= { ospfCumNbrChangeStats 11 }
|
|
|
|
ospfCumNbrN2way OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of Hello packets received from neighbours, in
|
|
which this router is mentioned across all OSPF interfaces
|
|
and areas."
|
|
::= { ospfCumNbrChangeStats 12 }
|
|
|
|
ospfCumIntfHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of Hello packets sent on all interfaces
|
|
and areas"
|
|
::= { ospfCumIntfChangeStats 1 }
|
|
|
|
ospfCumIntfDown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of interfaces down in all OSPF areas."
|
|
::= { ospfCumIntfChangeStats 2 }
|
|
|
|
ospfCumIntfLoop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total of interfaces no longer connected to
|
|
the attatched network across all OSPF areas and interfaces."
|
|
::= { ospfCumIntfChangeStats 3 }
|
|
|
|
ospfCumIntfUnloop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of interfaces, connected to
|
|
the attatched network in all OSPF areas."
|
|
::= { ospfCumIntfChangeStats 4 }
|
|
|
|
ospfCumIntfWaitTimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of times the Wait Timer has been fired,
|
|
(indicating the end of the waiting period that is required
|
|
before electing a (Backup) Designated Router) across all
|
|
OSPF areas and interfaces."
|
|
::= { ospfCumIntfChangeStats 5 }
|
|
|
|
ospfCumIntfBackup OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of Backup Designated Routers on the attatched
|
|
network for all OSPF areas and interfaces."
|
|
::= { ospfCumIntfChangeStats 6 }
|
|
|
|
ospfCumIntfNbrChange OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of changes in the set of bidirectional
|
|
neighbours associated with any interface across all OSPF areas."
|
|
::= { ospfCumIntfChangeStats 7 }
|
|
|
|
ospfTmrsKckOffHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of times the Hello timer has been fired
|
|
(which triggers the send of a Hello packet) across all OPSF
|
|
areas and interfaces."
|
|
::= { ospfTimersKickOffStats 1 }
|
|
|
|
ospfTmrsKckOffRetransmit OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of times the Retransmit timer has been
|
|
fired across all OPSF areas and interfaces."
|
|
::= { ospfTimersKickOffStats 2 }
|
|
|
|
ospfTmrsKckOffLsaLock OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of times the Lsa Lock timer has been
|
|
fired across all OSPF areas and interfaces."
|
|
::= { ospfTimersKickOffStats 3 }
|
|
|
|
ospfTmrsKckOffLsaAck OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum total number of times the Lsa Ack timer has been
|
|
fired across all ospf areas and interfaces."
|
|
::= { ospfTimersKickOffStats 4 }
|
|
|
|
ospfTmrsKckOffDbage OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the Dbage has been fired."
|
|
::= { ospfTimersKickOffStats 5 }
|
|
|
|
ospfTmrsKckOffSummary OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the Summary timer has been fired."
|
|
::= { ospfTimersKickOffStats 6 }
|
|
|
|
ospfTmrsKckOffAseExport OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the ASE Export timer has been fired."
|
|
::= { ospfTimersKickOffStats 7 }
|
|
|
|
|
|
-- Ospfv3 Statistics
|
|
|
|
-- Ospf Statistics for all interfaces and OSPF areas
|
|
ospfv3GeneralStats OBJECT IDENTIFIER ::= { ospfv3Stats 1 }
|
|
|
|
ospfv3StatsPackSent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No of packets sent."
|
|
::= { ospfv3GeneralStats 1 }
|
|
|
|
ospfv3PacketRx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PacketRx stats."
|
|
::= { ospfv3GeneralStats 2 }
|
|
|
|
ospfv3RxPacketDrop OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Num_rx_drop_packet."
|
|
::= { ospfv3GeneralStats 3 }
|
|
|
|
ospfv3TxPacketDrop OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ospfv3 Num_Tx_drop_packet."
|
|
::= { ospfv3GeneralStats 4 }
|
|
|
|
ospfv3RxBadPacket OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ospfv3 num_rx_bad_packet."
|
|
::= { ospfv3GeneralStats 5 }
|
|
|
|
ospfv3SpfRunCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SPF stats."
|
|
::= { ospfv3GeneralStats 6 }
|
|
|
|
ospfv3LastSpfRun OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SPF stats for ospfv3."
|
|
::= { ospfv3GeneralStats 7 }
|
|
|
|
ospfv3LSDBtableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LSDB size for ospfv3."
|
|
::= { ospfv3GeneralStats 8 }
|
|
|
|
ospfv3BadLSReqCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bad LS req stats for ospfv3."
|
|
::= { ospfv3GeneralStats 9 }
|
|
|
|
ospfv3SeqMismatchCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Seq mismatch stats for ospfv3."
|
|
::= { ospfv3GeneralStats 10 }
|
|
|
|
|
|
|
|
-- VRRP6 Stats
|
|
|
|
vrrp6StatInAdvers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of good VRRP6 advertisements which are received."
|
|
::= { vrrp6Stats 1 }
|
|
|
|
vrrp6StatOutAdvers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of good VRRP6 advertisements which are transmitted."
|
|
::= { vrrp6Stats 2 }
|
|
|
|
vrrp6StatOutBadAdvers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP6 advertisements which are received."
|
|
::= { vrrp6Stats 3 }
|
|
|
|
vrrp6StatBadVersion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP6 version which are received."
|
|
::= { vrrp6Stats 4 }
|
|
|
|
vrrp6StatBadVrid OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP6 VR id which are received."
|
|
::= { vrrp6Stats 5 }
|
|
|
|
vrrp6StatBadAddress OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP6 address which are received."
|
|
::= { vrrp6Stats 6 }
|
|
|
|
vrrp6StatBadData OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP7 data which are received."
|
|
::= { vrrp6Stats 7 }
|
|
|
|
vrrp6StatBadInterval OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP6 Interval which are received."
|
|
::= { vrrp6Stats 8 }
|
|
|
|
vrrp6StatBadHaid OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad VRRP6 Haid which are received."
|
|
::= { vrrp6Stats 9 }
|
|
|
|
-- End of VRRP6 stats
|
|
|
|
-- IP Tunnel stats
|
|
ipTunnelStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpTunnelStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Tunnel statistics table."
|
|
::= { ipTunnelStats 1 }
|
|
|
|
ipTunnelStatEntry OBJECT-TYPE
|
|
SYNTAX IpTunnelStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics of IP Tunnel entry."
|
|
INDEX { ipTunnelStatId } ::= { ipTunnelStatTable 1 }
|
|
|
|
IpTunnelStatEntry ::= SEQUENCE {
|
|
ipTunnelStatId DisplayString,
|
|
ipTunnelStatIndex Integer32,
|
|
ipTunnelStatState INTEGER,
|
|
ipTunnelStatType INTEGER,
|
|
ipTunnelStatDescription DisplayString,
|
|
ipTunnelStatCurrSess Gauge32,
|
|
ipTunnelStatTotSess Gauge32,
|
|
ipTunnelStatHighSess Gauge32,
|
|
ipTunnelStatOctets Counter64
|
|
}
|
|
|
|
ipTunnelStatId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP tunnel number for which the information is related."
|
|
::= { ipTunnelStatEntry 1 }
|
|
|
|
ipTunnelStatIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel local index"
|
|
::= { ipTunnelStatEntry 2 }
|
|
|
|
ipTunnelStatState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or Disable the IP tunnel interface."
|
|
::= { ipTunnelStatEntry 3 }
|
|
|
|
ipTunnelStatType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
-- vxlan(2),
|
|
ipinip(3),
|
|
gre(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP tunnel interface."
|
|
::= { ipTunnelStatEntry 4 }
|
|
|
|
ipTunnelStatDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The descriptive tunnel name."
|
|
::= { ipTunnelStatEntry 5 }
|
|
|
|
ipTunnelStatCurrSess OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sessions that are currently handled by IP Tunnel entry."
|
|
::= { ipTunnelStatEntry 6 }
|
|
|
|
ipTunnelStatTotSess OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of sessions that are handled by this IP Tunnel entry."
|
|
::= { ipTunnelStatEntry 7 }
|
|
|
|
ipTunnelStatHighSess OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest number of sessions that are handled by this IP Tunnel entry."
|
|
::= { ipTunnelStatEntry 8 }
|
|
|
|
ipTunnelStatOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total octets that are handled by this IP Tunnel entry."
|
|
::= { ipTunnelStatEntry 9}
|
|
|
|
-- End of IP Tunnel stats
|
|
|
|
|
|
ip6InReceives OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of input datagrams received from
|
|
interfaces, including those received in error."
|
|
::= { ip6Stats 1 }
|
|
|
|
ip6ForwDatagrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of input datagrams for which this entity was not
|
|
their final IP destination, as a result of which an attempt
|
|
was made to find a route to forward them to that final
|
|
destination."
|
|
::= { ip6Stats 2 }
|
|
|
|
ip6InDelivers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of input datagrams successfully
|
|
delivered to IP user-protocols (including ICMP)."
|
|
::= { ip6Stats 3 }
|
|
|
|
ip6InDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of input IP datagrams for which no problems were
|
|
encountered to prevent their continued processing, but which were
|
|
discarded (e.g., for lack of buffer space). Note that this counter
|
|
does not include any datagrams discarded while awaiting re-assembly."
|
|
::= { ip6Stats 4 }
|
|
|
|
ip6InUnknownProtos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of locally-addressed datagrams received successfully
|
|
but discarded because of an unknown or unsupported protocol."
|
|
::= { ip6Stats 5 }
|
|
|
|
ip6InAddrErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of input datagrams discarded because the IP address
|
|
in their IP header's destination field was not a valid address
|
|
to be received at this entity."
|
|
::= { ip6Stats 6 }
|
|
|
|
ip6OutRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of IP datagrams which local IP
|
|
user-protocols (including ICMP) supplied to IP in
|
|
requests for transmission. Note that this counter does not
|
|
include any datagrams counted in ipForwDatagrams."
|
|
::= { ip6Stats 7 }
|
|
|
|
ip6OutNoRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IP datagrams discarded because no route
|
|
could be found to transmit them to their destination.
|
|
Note that this Counter32 includes any packets counted in
|
|
ipForwDatagrams which meet this`no-route' criterion.
|
|
Note that this includes any datagrams which a host cannot
|
|
route because all of its default gateways are down."
|
|
::= { ip6Stats 8 }
|
|
|
|
ip6ReasmOKs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IP datagrams successfully re-assembled."
|
|
::= { ip6Stats 9 }
|
|
|
|
ip6ReasmFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of failures detected by the IP re-assembly."
|
|
::= { ip6Stats 10 }
|
|
|
|
ip6icmpInMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ICMP messages received.
|
|
Note that this Counter32 includes all those counted by
|
|
icmpInErrors."
|
|
::= { ip6Stats 11 }
|
|
|
|
ip6icmpOutMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ICMP messages attempted to send. Note that
|
|
this Counter32 includes all those counted by icmp6OutErrors."
|
|
::= { ip6Stats 12}
|
|
|
|
ip6icmpInErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP messages received but determined as having
|
|
ICMP-specific errors (bad ICMP checksums, bad length, etc.)."
|
|
::= { ip6Stats 13 }
|
|
|
|
ip6icmpOutErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP messages did not send due to problems
|
|
discovered within ICMP such as a lack of buffers."
|
|
::= { ip6Stats 14}
|
|
|
|
icmp6StatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Icmp6StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics for ICMP6."
|
|
::= { icmp6Stats 1 }
|
|
|
|
icmp6StatsEntry OBJECT-TYPE
|
|
SYNTAX Icmp6StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics for IGMP Snooping."
|
|
INDEX { icmp6StatsIndx}
|
|
::= { icmp6StatsTable 1 }
|
|
|
|
Icmp6StatsEntry ::= SEQUENCE {
|
|
icmp6StatsIndx Integer32,
|
|
icmp6IntfIndex Integer32,
|
|
icmp6InMsgs Counter32,
|
|
icmp6InErrors Counter32,
|
|
icmp6InEchos Counter32,
|
|
icmp6InEchoReps Counter32,
|
|
icmp6InNSs Counter32,
|
|
icmp6InNAs Counter32,
|
|
icmp6InRSs Counter32,
|
|
icmp6InRAs Counter32,
|
|
icmp6InDestUnreachs Counter32,
|
|
icmp6InTimeExcds Counter32,
|
|
icmp6InTooBigs Counter32,
|
|
icmp6InParmProbs Counter32,
|
|
icmp6InRedirects Counter32,
|
|
icmp6OutMsgs Counter32,
|
|
icmp6OutErrors Counter32,
|
|
icmp6OutEchos Counter32,
|
|
icmp6OutEchoReps Counter32,
|
|
icmp6OutNSs Counter32,
|
|
icmp6OutNAs Counter32,
|
|
icmp6OutRSs Counter32,
|
|
icmp6OutRAs Counter32,
|
|
icmp6OutRedirects Counter32
|
|
}
|
|
|
|
icmp6StatsIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this statistics table."
|
|
::= { icmp6StatsEntry 1 }
|
|
|
|
icmp6IntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP interface index in interface configuration table."
|
|
::= { icmp6StatsEntry 2 }
|
|
|
|
icmp6InMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ICMP messages received. Note that this
|
|
Counter32 includes all those counted by icmpInErrors."
|
|
::= { icmp6StatsEntry 3 }
|
|
|
|
icmp6InErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP messages received but determined as having
|
|
ICMP-specific errors (bad ICMP checksums, bad length, etc.)."
|
|
::= { icmp6StatsEntry 4 }
|
|
|
|
icmp6InEchos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP Echo request messages received."
|
|
::= { icmp6StatsEntry 5 }
|
|
|
|
icmp6InEchoReps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP Echo Reply messages received."
|
|
::= { icmp6StatsEntry 6 }
|
|
|
|
icmp6InNSs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of neighbour solicitations received."
|
|
::= { icmp6StatsEntry 7 }
|
|
|
|
icmp6InNAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of neighbour advertisements received."
|
|
::= { icmp6StatsEntry 8 }
|
|
|
|
icmp6InRSs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of router solicitations received."
|
|
::= { icmp6StatsEntry 9 }
|
|
|
|
icmp6InRAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of router advertisements received."
|
|
::= { icmp6StatsEntry 10 }
|
|
|
|
icmp6InDestUnreachs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP Destination Unreachable messages received."
|
|
::= { icmp6StatsEntry 11 }
|
|
|
|
icmp6InTimeExcds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP Time Exceeded messages received."
|
|
::= { icmp6StatsEntry 12 }
|
|
|
|
icmp6InTooBigs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP too big messages received."
|
|
::= { icmp6StatsEntry 13 }
|
|
|
|
icmp6InParmProbs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP Parameter Problem messages received."
|
|
::= { icmp6StatsEntry 14 }
|
|
|
|
icmp6InRedirects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP Redirect messages received."
|
|
::= { icmp6StatsEntry 15 }
|
|
|
|
icmp6OutMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of ICMP messages which this entity
|
|
attempted to send. Note that this Counter32 includes
|
|
all those counted by icmp6OutErrors."
|
|
::= { icmp6StatsEntry 16 }
|
|
|
|
icmp6OutErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP messages which this entity did not
|
|
send due to problems discovered within ICMP
|
|
such as a lack of buffers."
|
|
::= { icmp6StatsEntry 17 }
|
|
|
|
icmp6OutEchos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP Echo request messages sent."
|
|
::= { icmp6StatsEntry 18 }
|
|
|
|
icmp6OutEchoReps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP Echo Reply messages sent."
|
|
::= { icmp6StatsEntry 19 }
|
|
|
|
icmp6OutNSs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of neighbour solicitations sent."
|
|
::= { icmp6StatsEntry 20 }
|
|
|
|
icmp6OutNAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of neighbour advertisements sent."
|
|
::= { icmp6StatsEntry 21 }
|
|
|
|
icmp6OutRSs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of router solicitations sent."
|
|
::= { icmp6StatsEntry 22 }
|
|
|
|
icmp6OutRAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of router advertisements sent."
|
|
::= { icmp6StatsEntry 23 }
|
|
|
|
icmp6OutRedirects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ICMP Redirect messages sent. For a host, this
|
|
object will always be zero, since hosts do not send redirects."
|
|
::= { icmp6StatsEntry 24 }
|
|
|
|
ip6GwStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ip6GwStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics for IP6 Gateway."
|
|
::= { ip6gwStats 1 }
|
|
|
|
ip6GwStatsEntry OBJECT-TYPE
|
|
SYNTAX Ip6GwStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics for IP6 Gateway."
|
|
INDEX { ip6GwStatsIndex}
|
|
::= { ip6GwStatsTable 1 }
|
|
|
|
Ip6GwStatsEntry ::= SEQUENCE {
|
|
ip6GwStatsIndex Integer32,
|
|
ip6GwIndex Integer32,
|
|
ip6GwEchoreq Counter32,
|
|
ip6GwEchoresp Counter32,
|
|
ip6GwFails Counter32,
|
|
ip6GwMaster Integer32,
|
|
ip6IfIndex Integer32,
|
|
ip6GwRetry Counter32
|
|
}
|
|
|
|
ip6GwStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of Gw6 statistics."
|
|
::= { ip6GwStatsEntry 1}
|
|
|
|
ip6GwIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gateway index in gateway configuration table."
|
|
::= { ip6GwStatsEntry 2}
|
|
|
|
ip6GwEchoreq OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of GW Echo request messages ."
|
|
::= { ip6GwStatsEntry 3 }
|
|
|
|
ip6GwEchoresp OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of GW Echo response messages ."
|
|
::= { ip6GwStatsEntry 4 }
|
|
|
|
ip6GwFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of GWs fails."
|
|
::= { ip6GwStatsEntry 5 }
|
|
|
|
ip6GwMaster OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The master gateway."
|
|
::= { ip6GwStatsEntry 6 }
|
|
|
|
ip6IfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP6 interface."
|
|
::= { ip6GwStatsEntry 7 }
|
|
|
|
ip6GwRetry OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of retries."
|
|
::= { ip6GwStatsEntry 8 }
|
|
|
|
|
|
-- Information - Run-time IP Route Table
|
|
|
|
|
|
ipIntfInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IntfInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP interface information."
|
|
::= {ipIntfInfo 1 }
|
|
|
|
intfInfoEntry OBJECT-TYPE
|
|
SYNTAX IntfInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in IP interface information table."
|
|
INDEX { intfInfoIndex }
|
|
::= { ipIntfInfoTable 1 }
|
|
|
|
IntfInfoEntry ::= SEQUENCE {
|
|
intfInfoIndex Integer32,
|
|
intfInfoIpver INTEGER,
|
|
intfInfoAddr DisplayString,
|
|
intfInfoNetMask DisplayString,
|
|
intfInfoBcastAddr DisplayString,
|
|
intfInfoVlan Integer32,
|
|
intfInfoLinkLocalAddr DisplayString,
|
|
intfInfoStatus INTEGER,
|
|
intfInfoBfd INTEGER
|
|
}
|
|
|
|
intfInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface number for which the information is related."
|
|
::= { intfInfoEntry 1}
|
|
|
|
|
|
intfInfoIpver OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address."
|
|
::= { intfInfoEntry 2 }
|
|
|
|
|
|
intfInfoAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the interface."
|
|
::= { intfInfoEntry 3 }
|
|
|
|
intfInfoNetMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of the interface."
|
|
::= { intfInfoEntry 4 }
|
|
|
|
intfInfoBcastAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The broadcast address of the interface."
|
|
::= { intfInfoEntry 5 }
|
|
|
|
intfInfoVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN number for this interface."
|
|
::= { intfInfoEntry 6 }
|
|
|
|
intfInfoStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the interface."
|
|
::= { intfInfoEntry 7 }
|
|
|
|
|
|
intfInfoLinkLocalAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The site local address of the interface."
|
|
::= { intfInfoEntry 8 }
|
|
|
|
intfInfoBfd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gives information whether BFD is on/off on the interface."
|
|
::= { intfInfoEntry 9 }
|
|
|
|
ipRouteInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpRouteInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of run-time IP routes."
|
|
::= { ipRoutingInfo 1 }
|
|
|
|
ipRouteInfoEntry OBJECT-TYPE
|
|
SYNTAX IpRouteInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the run-time IP route table"
|
|
INDEX { ipRouteInfoIndx }
|
|
::= { ipRouteInfoTable 1 }
|
|
|
|
IpRouteInfoEntry ::= SEQUENCE {
|
|
ipRouteInfoIndx Integer32,
|
|
ipRouteInfoDestIp IpAddress,
|
|
ipRouteInfoMask IpAddress,
|
|
ipRouteInfoGateway IpAddress,
|
|
ipRouteInfoTag INTEGER,
|
|
ipRouteInfoType INTEGER,
|
|
ipRouteInfoInterface Integer32,
|
|
ipRouteInfoGateway1 IpAddress,
|
|
ipRouteInfoGateway2 IpAddress,
|
|
ipRouteInfoMetric Integer32,
|
|
ipRouteInfoTunnelId DisplayString,
|
|
ipRouteInfoMode INTEGER
|
|
}
|
|
|
|
ipRouteInfoIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this route table."
|
|
::= { ipRouteInfoEntry 1 }
|
|
|
|
ipRouteInfoDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { ipRouteInfoEntry 2 }
|
|
|
|
ipRouteInfoMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP mask of this route."
|
|
::= { ipRouteInfoEntry 3 }
|
|
|
|
ipRouteInfoGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next-hop router address for this route."
|
|
::= { ipRouteInfoEntry 4 }
|
|
|
|
ipRouteInfoTag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fixed(1),
|
|
static(2),
|
|
addr(3),
|
|
rip(4),
|
|
broadcast(5),
|
|
martian(6),
|
|
multicast(7),
|
|
vip(8),
|
|
bgp(9),
|
|
ospf(10),
|
|
none(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tag-type for this route."
|
|
::= { ipRouteInfoEntry 5 }
|
|
|
|
ipRouteInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
indirect(1),
|
|
direct(2),
|
|
local(3),
|
|
broadcast(4),
|
|
martian(5),
|
|
multicast(6),
|
|
other(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the route."
|
|
::= { ipRouteInfoEntry 6 }
|
|
|
|
ipRouteInfoInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface number for which the destination address is applicable."
|
|
::= { ipRouteInfoEntry 7 }
|
|
|
|
ipRouteInfoGateway1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next-hop router address for this route."
|
|
::= { ipRouteInfoEntry 8 }
|
|
|
|
ipRouteInfoGateway2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next-hop router address for this route."
|
|
::= { ipRouteInfoEntry 9 }
|
|
|
|
ipRouteInfoMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Metric for this route."
|
|
::= { ipRouteInfoEntry 10 }
|
|
|
|
ipRouteInfoTunnelId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tunnel Id for this route."
|
|
::= { ipRouteInfoEntry 11 }
|
|
|
|
ipRouteInfoMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gateway(1),
|
|
tunnel(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Route mode - gateway or tunnel route."
|
|
::= { ipRouteInfoEntry 12 }
|
|
|
|
routeTableClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
clear(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this value to clear(2) clears the route table."
|
|
::= { ipRoutingInfo 2 }
|
|
|
|
-- Run Time ARP Table
|
|
|
|
arpInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgArpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ARP entries."
|
|
::= { arpInfo 1 }
|
|
|
|
arpInfoEntry OBJECT-TYPE
|
|
SYNTAX AgArpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the ARP table"
|
|
INDEX { arpInfoDestIp }
|
|
::= { arpInfoTable 1 }
|
|
|
|
AgArpInfoEntry ::= SEQUENCE {
|
|
arpInfoDestIp IpAddress,
|
|
arpInfoMacAddr PhysAddress,
|
|
arpInfoVLAN Integer32,
|
|
arpInfoSrcPort Integer32,
|
|
arpInfoRefPorts Integer32,
|
|
arpInfoFlag INTEGER,
|
|
arpInfoRefSPs DisplayString
|
|
}
|
|
|
|
arpInfoDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of the ARP entry."
|
|
::= { arpInfoEntry 1 }
|
|
|
|
arpInfoMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address for the ARP entry."
|
|
::= { arpInfoEntry 2 }
|
|
|
|
arpInfoVLAN OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN identifier for the ARP entry."
|
|
::= { arpInfoEntry 3 }
|
|
|
|
arpInfoSrcPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number on which this entry's equivalence is effective."
|
|
::= { arpInfoEntry 4 }
|
|
|
|
arpInfoRefPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of reference SPs associated with this ARP entry."
|
|
::= { arpInfoEntry 5 }
|
|
|
|
arpInfoFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1),
|
|
unresolved(2),
|
|
permanent(3),
|
|
indirect(4),
|
|
layer4(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flag associated with this ARP entry."
|
|
::= { arpInfoEntry 6 }
|
|
|
|
arpInfoRefSPs OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reference SPs associated with this ARP entry."
|
|
::= { arpInfoEntry 7 }
|
|
|
|
arpCacheClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
clear(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this value to clear(2) clears the ARP cache."
|
|
::= { arpInfo 2 }
|
|
|
|
-- VRRP Information
|
|
|
|
vrrpInfoVirtRtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpInfoVirtRtrTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VRRP virtual router run-time information."
|
|
::= { vrrpInfo 1 }
|
|
|
|
vrrpInfoVirtRtrTableEntry OBJECT-TYPE
|
|
SYNTAX VrrpInfoVirtRtrTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The run-time information about a VRRP virtual router."
|
|
INDEX { vrrpInfoVirtRtrIndex }
|
|
::= { vrrpInfoVirtRtrTable 1 }
|
|
|
|
VrrpInfoVirtRtrTableEntry ::= SEQUENCE {
|
|
vrrpInfoVirtRtrIndex Integer32,
|
|
vrrpInfoVirtRtrState INTEGER,
|
|
vrrpInfoVirtRtrOwnership INTEGER,
|
|
vrrpInfoVirtRtrServer INTEGER,
|
|
vrrpInfoVirtRtrProxy INTEGER,
|
|
vrrpInfoVirtRtrPriority Integer32
|
|
}
|
|
|
|
vrrpInfoVirtRtrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router index."
|
|
::= { vrrpInfoVirtRtrTableEntry 1 }
|
|
|
|
vrrpInfoVirtRtrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
init(1),
|
|
master(2),
|
|
backup(3),
|
|
holdoff(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router state."
|
|
::= { vrrpInfoVirtRtrTableEntry 2 }
|
|
|
|
vrrpInfoVirtRtrOwnership OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
owner(1),
|
|
renter(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router ownership status."
|
|
::= { vrrpInfoVirtRtrTableEntry 3 }
|
|
|
|
vrrpInfoVirtRtrServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP server state identifies virtual routers that support
|
|
Layer 4 services."
|
|
::= { vrrpInfoVirtRtrTableEntry 4 }
|
|
|
|
vrrpInfoVirtRtrProxy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP proxy state identifies virtual proxy routers."
|
|
::= { vrrpInfoVirtRtrTableEntry 5 }
|
|
|
|
vrrpInfoVirtRtrPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP virtual router priority."
|
|
::= { vrrpInfoVirtRtrTableEntry 6 }
|
|
|
|
vrrpInfoHAState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global VRRP or HA state"
|
|
::= { vrrpInfo 2 }
|
|
|
|
-- Ospf Information
|
|
|
|
ospfGeneralInfo OBJECT IDENTIFIER ::= { ospfinfo 1 }
|
|
|
|
ospfStartTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when ospf has been started."
|
|
::= { ospfGeneralInfo 1 }
|
|
|
|
ospfProcessUptime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since ospf has been started."
|
|
::= { ospfGeneralInfo 2 }
|
|
|
|
ospfLsTypesSupported OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State Types that are supported."
|
|
::= { ospfGeneralInfo 3 }
|
|
|
|
ospfIntfCountForRouter OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of interfaces for this router."
|
|
::= { ospfGeneralInfo 4 }
|
|
|
|
ospfVlinkCountForRouter OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of virtual links for this router."
|
|
::= { ospfGeneralInfo 5 }
|
|
|
|
ospfTotalNeighbours OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of OSPF neighbours."
|
|
::= { ospfGeneralInfo 6 }
|
|
|
|
ospfNbrInInitState OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of neighbours in the initial state of exchange."
|
|
::= { ospfGeneralInfo 7 }
|
|
|
|
ospfNbrInExchState OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of neighbours in the exchange state."
|
|
::= { ospfGeneralInfo 8 }
|
|
|
|
ospfNbrInFullState OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of neighbours in the Full state of exchange."
|
|
::= { ospfGeneralInfo 9 }
|
|
|
|
ospfTotalAreas OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Total number of areas."
|
|
::= { ospfGeneralInfo 10 }
|
|
|
|
ospfTotalTransitAreas OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Total number of Transit areas."
|
|
::= { ospfGeneralInfo 11 }
|
|
|
|
ospfTotalNssaAreas OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Total number of NSSA areas."
|
|
::= { ospfGeneralInfo 12 }
|
|
|
|
ospfAreaInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfAreaInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Area information."
|
|
::= { ospfinfo 2 }
|
|
|
|
ospfAreaInfoEntry OBJECT-TYPE
|
|
SYNTAX OspfAreaInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPF area."
|
|
INDEX { ospfAreaInfoIndex }
|
|
::= { ospfAreaInfoTable 1 }
|
|
|
|
OspfAreaInfoEntry ::= SEQUENCE {
|
|
ospfAreaInfoIndex Integer32,
|
|
ospfTotalNumberOfInterfaces Integer32,
|
|
ospfNumberOfInterfacesUp Integer32,
|
|
ospfNumberOfLsdbEntries Integer32,
|
|
ospfAreaInfoId IpAddress
|
|
|
|
}
|
|
|
|
ospfAreaInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF area number for which the OSPF info table is related."
|
|
::= { ospfAreaInfoEntry 1}
|
|
|
|
ospfTotalNumberOfInterfaces OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of interfaces for this OSPF area."
|
|
::= { ospfAreaInfoEntry 2}
|
|
|
|
ospfNumberOfInterfacesUp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of interfaces UP in area."
|
|
::= { ospfAreaInfoEntry 3}
|
|
|
|
ospfNumberOfLsdbEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Link State Database entries for this OSPF area."
|
|
::= { ospfAreaInfoEntry 4}
|
|
|
|
ospfAreaInfoId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the OSPF area."
|
|
::= { ospfAreaInfoEntry 5}
|
|
|
|
ospfIntfInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfIntfInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Interface information."
|
|
::= { ospfinfo 3 }
|
|
|
|
ospfIntfInfoEntry OBJECT-TYPE
|
|
SYNTAX OspfIntfInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPF interface."
|
|
INDEX { ospfIfInfoIndex }
|
|
::= { ospfIntfInfoTable 1 }
|
|
|
|
OspfIntfInfoEntry ::= SEQUENCE {
|
|
ospfIfInfoIndex Integer32,
|
|
ospfIfDesignatedRouterIP IpAddress,
|
|
ospfIfBackupDesignatedRouterIP IpAddress,
|
|
ospfIfWaitInterval Integer32,
|
|
ospfIfTotalNeighbours Integer32,
|
|
ospfIfInfoIpAddress IpAddress
|
|
}
|
|
|
|
ospfIfInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface number for which the OSPF info table is related."
|
|
::= { ospfIntfInfoEntry 1}
|
|
|
|
ospfIfDesignatedRouterIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Designated Router ID (IP Address) for this OSPF interface."
|
|
::= { ospfIntfInfoEntry 2}
|
|
|
|
ospfIfBackupDesignatedRouterIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Backup Designated Router ID (IP Address) for this OSPF
|
|
interface."
|
|
::= { ospfIntfInfoEntry 3}
|
|
|
|
ospfIfWaitInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Wait interval for this OSPF interface."
|
|
::= { ospfIntfInfoEntry 4}
|
|
|
|
ospfIfTotalNeighbours OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Total number of neighbours for this OSPF interface."
|
|
::= { ospfIntfInfoEntry 5}
|
|
|
|
ospfIfInfoIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the OSPF interface."
|
|
::= { ospfIntfInfoEntry 6}
|
|
|
|
-- OSPF Interface/Nbr Info Table
|
|
|
|
ospfIfNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfIfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPF Interface Neighbour information."
|
|
::= { ospfinfo 5 }
|
|
|
|
ospfIfNbrEntry OBJECT-TYPE
|
|
SYNTAX OspfIfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPF interface, neighbour pair."
|
|
INDEX { ospfIfNbrIntfIndex, ospfIfNbrIpAddr }
|
|
::= { ospfIfNbrTable 1 }
|
|
|
|
OspfIfNbrEntry ::= SEQUENCE {
|
|
ospfIfNbrIntfIndex Integer32,
|
|
ospfIfNbrIpAddr IpAddress,
|
|
ospfIfNbrPriority Integer32,
|
|
ospfIfNbrState INTEGER,
|
|
ospfIfNbrDesignatedRtr IpAddress,
|
|
ospfIfNbrBackupDesignatedRtr IpAddress,
|
|
ospfIfNbrIpAddress IpAddress
|
|
}
|
|
|
|
ospfIfNbrIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface number for which this Interface/Nbr table is
|
|
related."
|
|
::= { ospfIfNbrEntry 1}
|
|
|
|
ospfIfNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Neighbour ID ."
|
|
::= { ospfIfNbrEntry 2 }
|
|
|
|
ospfIfNbrPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of the OSPF neighbour."
|
|
::= { ospfIfNbrEntry 3 }
|
|
|
|
ospfIfNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
attempt(2),
|
|
init(3),
|
|
twoway(4),
|
|
exStart(5),
|
|
exchange(6),
|
|
loading(7),
|
|
full(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the OSPF neighbour."
|
|
::= { ospfIfNbrEntry 4 }
|
|
|
|
ospfIfNbrDesignatedRtr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Designated Router for this OSPF Neighbour."
|
|
::= { ospfIfNbrEntry 5 }
|
|
|
|
ospfIfNbrBackupDesignatedRtr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the backup designated Router for this OSPF Neighbour."
|
|
::= { ospfIfNbrEntry 6 }
|
|
|
|
ospfIfNbrIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the OSPF Neighbour."
|
|
::= { ospfIfNbrEntry 7 }
|
|
|
|
-- Gateway Information
|
|
gatewayInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF GatewayInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table containing information for the default gateways."
|
|
::= { gatewayInfo 1 }
|
|
|
|
gatewayInfoEntry OBJECT-TYPE
|
|
SYNTAX GatewayInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the gateway information table"
|
|
INDEX { gatewayInfoIndex }
|
|
::= { gatewayInfoTable 1 }
|
|
|
|
GatewayInfoEntry ::= SEQUENCE {
|
|
gatewayInfoIndex Integer32,
|
|
gatewayInfoAddr IpAddress,
|
|
gatewayInfoVlan Integer32,
|
|
gatewayInfoAddr6 DisplayString,
|
|
gatewayInfoStatus INTEGER
|
|
}
|
|
|
|
gatewayInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway number for which the information is related."
|
|
::= { gatewayInfoEntry 1}
|
|
|
|
gatewayInfoAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the default gateway."
|
|
::= { gatewayInfoEntry 2 }
|
|
|
|
gatewayInfoVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN number for this gateway."
|
|
::= { gatewayInfoEntry 3 }
|
|
|
|
gatewayInfoStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
failed(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the default gateway."
|
|
::= { gatewayInfoEntry 4 }
|
|
|
|
|
|
gatewayInfoAddr6 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP6 address of the default gateway."
|
|
::= { gatewayInfoEntry 5 }
|
|
|
|
|
|
|
|
-- nbrcache Info Table
|
|
|
|
nbrcacheInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NbrcacheInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of nbrcache information."
|
|
::= { nbrcacheInfo 1 }
|
|
|
|
nbrcacheInfoEntry OBJECT-TYPE
|
|
SYNTAX NbrcacheInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about neighbour discovery protocol."
|
|
INDEX { nbrcacheInfoIndex }
|
|
::= { nbrcacheInfoTable 1 }
|
|
|
|
NbrcacheInfoEntry ::= SEQUENCE {
|
|
nbrcacheInfoIndex Integer32,
|
|
nbrcacheInfoDestIp DisplayString,
|
|
nbrcacheInfoState INTEGER,
|
|
nbrcacheInfoType INTEGER,
|
|
nbrcacheInfoMacAddr PhysAddress,
|
|
nbrcacheInfoVlanId Integer32,
|
|
nbrcacheInfoPortNum Integer32
|
|
}
|
|
|
|
nbrcacheInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the nbrcache entry."
|
|
::= { nbrcacheInfoEntry 1 }
|
|
|
|
nbrcacheInfoDestIp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of the nbrcache entry."
|
|
::= { nbrcacheInfoEntry 2 }
|
|
|
|
nbrcacheInfoState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undef(1),
|
|
reach(2),
|
|
stale(3),
|
|
delay(4),
|
|
probe(5),
|
|
inval(6),
|
|
unknown(7),
|
|
incmp(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the nbrcache entry."
|
|
::= { nbrcacheInfoEntry 3 }
|
|
|
|
nbrcacheInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undef(1),
|
|
other(2),
|
|
invalid(3),
|
|
dynamic(4),
|
|
static(5),
|
|
local(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the nbrcache entry."
|
|
::= { nbrcacheInfoEntry 4 }
|
|
|
|
nbrcacheInfoMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address for the nbrcache entry."
|
|
::= { nbrcacheInfoEntry 5 }
|
|
|
|
nbrcacheInfoVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN identifier for the nbrcache entry."
|
|
::= { nbrcacheInfoEntry 6 }
|
|
|
|
nbrcacheInfoPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number on which this entry's equivalence is effective."
|
|
::= { nbrcacheInfoEntry 7 }
|
|
|
|
nbrcacheClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
clear(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this value to clear(2) clears the Nbr cache,
|
|
When read ok(1) is returned."
|
|
::= { nbrcacheInfo 2 }
|
|
|
|
nbrcacheInfoTotDynamicEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of dynamic neighbour cache entries."
|
|
::= { nbrcacheInfo 3 }
|
|
|
|
nbrcacheInfoTotLocalEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of local neighbour cache entries."
|
|
::= { nbrcacheInfo 4 }
|
|
|
|
nbrcacheInfoTotOtherEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of other neighbour cache entries."
|
|
::= { nbrcacheInfo 5 }
|
|
|
|
nbrcacheInfoTotStaticEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of static neighbour cache entries."
|
|
::= { nbrcacheInfo 6 }
|
|
|
|
ipRoute6InfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpRoute6InfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of run-time IP6 routes."
|
|
::= { ipRoute6Info 1 }
|
|
|
|
ipRoute6InfoEntry OBJECT-TYPE
|
|
SYNTAX IpRoute6InfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the run-time IP6 route table."
|
|
INDEX { ipRoute6InfoIndx }
|
|
::= { ipRoute6InfoTable 1 }
|
|
|
|
IpRoute6InfoEntry ::= SEQUENCE {
|
|
ipRoute6InfoIndx Integer32,
|
|
ipRoute6InfoDestIp6 DisplayString,
|
|
ipRoute6InfoInterface Integer32,
|
|
ipRoute6InfoNextHop DisplayString,
|
|
ipRoute6InfoProto INTEGER,
|
|
ipRoute6InfoTunnelId DisplayString,
|
|
ipRoute6InfoMode INTEGER
|
|
}
|
|
|
|
ipRoute6InfoIndx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this route6 table."
|
|
::= { ipRoute6InfoEntry 1 }
|
|
|
|
ipRoute6InfoDestIp6 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination of the route."
|
|
::= { ipRoute6InfoEntry 2 }
|
|
|
|
ipRoute6InfoInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface of the route."
|
|
::= { ipRoute6InfoEntry 3 }
|
|
|
|
ipRoute6InfoNextHop OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next hop of the route."
|
|
::= { ipRoute6InfoEntry 4 }
|
|
|
|
ipRoute6InfoProto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
isis(1),
|
|
rip(2),
|
|
ospf(3),
|
|
static(4),
|
|
local(5),
|
|
bgp(6),
|
|
stlow(7),
|
|
ospfi(8),
|
|
ospfe(9),
|
|
ospfe2(10),
|
|
ospfa(11),
|
|
ripa(12),
|
|
bgpa(13),
|
|
igmp(14),
|
|
unknown(15),
|
|
natpt(16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol type of the route."
|
|
::= { ipRoute6InfoEntry 5 }
|
|
|
|
ipRoute6InfoTunnelId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tunnel Id for this route."
|
|
::= { ipRoute6InfoEntry 6 }
|
|
|
|
ipRoute6InfoMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gateway(1),
|
|
tunnel(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Route mode - gateway or tunnel route."
|
|
::= { ipRoute6InfoEntry 7 }
|
|
|
|
rip2GeneralInfo OBJECT IDENTIFIER ::= { rip2Info 1 }
|
|
|
|
ripInfoState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIP global state."
|
|
::= { rip2GeneralInfo 1 }
|
|
|
|
ripInfoUpdatePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..120)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Update Period in seconds."
|
|
::= { rip2GeneralInfo 2 }
|
|
|
|
ripInfoVip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertise VIP Host Routes."
|
|
::= { rip2GeneralInfo 3 }
|
|
|
|
ripInfoStaticSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Advertise Static Routes."
|
|
::= { rip2GeneralInfo 4 }
|
|
|
|
rip2InfoIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RipInfoIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information table of RIP."
|
|
::= { rip2Info 2 }
|
|
|
|
ripInfoIntfEntry OBJECT-TYPE
|
|
SYNTAX RipInfoIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about RIP on IP interface."
|
|
INDEX { ripInfoIntfIndex }
|
|
::= { rip2InfoIntfTable 1 }
|
|
|
|
RipInfoIntfEntry ::= SEQUENCE {
|
|
ripInfoIntfIndex Integer32,
|
|
ripInfoIntfVersion INTEGER,
|
|
ripInfoIntfAddress IpAddress,
|
|
ripInfoIntfState INTEGER,
|
|
ripInfoIntfListen INTEGER,
|
|
ripInfoIntfTrigUpdate INTEGER,
|
|
ripInfoIntfMcastUpdate INTEGER,
|
|
ripInfoIntfPoisonReverse INTEGER,
|
|
ripInfoIntfSupply INTEGER,
|
|
ripInfoIntfMetric INTEGER,
|
|
ripInfoIntfAuth INTEGER,
|
|
ripInfoIntfKey DisplayString,
|
|
ripInfoIntfDefault INTEGER
|
|
}
|
|
|
|
ripInfoIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface number for which the RIP information is related."
|
|
::= { ripInfoIntfEntry 1 }
|
|
|
|
ripInfoIntfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ripVersion1(1),
|
|
ripVersion2(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIP version."
|
|
::= { ripInfoIntfEntry 2 }
|
|
|
|
ripInfoIntfAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface address."
|
|
::= { ripInfoIntfEntry 3 }
|
|
|
|
ripInfoIntfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of RIP protocol."
|
|
::= { ripInfoIntfEntry 4 }
|
|
|
|
ripInfoIntfListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of listening to route updates."
|
|
::= { ripInfoIntfEntry 5 }
|
|
|
|
ripInfoIntfTrigUpdate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of triggered updates."
|
|
::= { ripInfoIntfEntry 6 }
|
|
|
|
ripInfoIntfMcastUpdate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of multicast updates."
|
|
::= { ripInfoIntfEntry 7 }
|
|
|
|
ripInfoIntfPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of RIP poison reverse."
|
|
::= { ripInfoIntfEntry 8 }
|
|
|
|
ripInfoIntfSupply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of supplying route updates."
|
|
::= { ripInfoIntfEntry 9 }
|
|
|
|
ripInfoIntfMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIP route metric for this interface."
|
|
::= { ripInfoIntfEntry 10 }
|
|
|
|
ripInfoIntfAuth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
password(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Authentication used on this interface."
|
|
::= { ripInfoIntfEntry 11 }
|
|
|
|
ripInfoIntfKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIP update authentication password."
|
|
::= { ripInfoIntfEntry 12 }
|
|
|
|
ripInfoIntfDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
both(1),
|
|
listen(2),
|
|
supply(3),
|
|
none(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies what RIP does with default routes."
|
|
::= { ripInfoIntfEntry 13 }
|
|
|
|
|
|
rip2RoutesInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rip2RoutesInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of rip routes."
|
|
::= { rip2RoutesInfo 1 }
|
|
|
|
rip2RoutesInfoEntry OBJECT-TYPE
|
|
SYNTAX Rip2RoutesInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about rip routes."
|
|
INDEX { rip2RoutesInfoDestIndex, rip2RoutesInfoNxtHopIndex }
|
|
::= { rip2RoutesInfoTable 1 }
|
|
|
|
Rip2RoutesInfoEntry ::= SEQUENCE {
|
|
rip2RoutesInfoDestIndex Integer32,
|
|
rip2RoutesInfoNxtHopIndex Integer32,
|
|
rip2RoutesInfoDestination DisplayString,
|
|
rip2RoutesInfoIpAddress IpAddress,
|
|
rip2RoutesInfoMetric INTEGER
|
|
}
|
|
|
|
rip2RoutesInfoDestIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the rip routes."
|
|
::= { rip2RoutesInfoEntry 1 }
|
|
|
|
rip2RoutesInfoNxtHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the next hop."
|
|
::= { rip2RoutesInfoEntry 2 }
|
|
|
|
rip2RoutesInfoDestination OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination of the rip route."
|
|
::= { rip2RoutesInfoEntry 3 }
|
|
|
|
rip2RoutesInfoIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ipaddress of the next hop."
|
|
::= { rip2RoutesInfoEntry 4 }
|
|
|
|
rip2RoutesInfoMetric OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..15 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RIP route metric for this route."
|
|
::= { rip2RoutesInfoEntry 5 }
|
|
|
|
allowedNwInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AllowedNwInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of allowed network run-time information."
|
|
::= { allowedNwInfo 1 }
|
|
|
|
allowedNwInfoEntry OBJECT-TYPE
|
|
SYNTAX AllowedNwInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the allowed network information table."
|
|
INDEX { allowedNwInfoIndex }
|
|
::= { allowedNwInfoTable 1 }
|
|
|
|
AllowedNwInfoEntry ::= SEQUENCE {
|
|
allowedNwInfoIndex Integer32,
|
|
allowedNwInfoIpver INTEGER,
|
|
allowedNwInfoVlan Integer32,
|
|
allowedNwInfoBeginIpAddr DisplayString,
|
|
allowedNwInfoEndIpAddr DisplayString,
|
|
allowedNwInfoNetMask DisplayString,
|
|
allowedNwInfoIp6Prefix Integer32
|
|
}
|
|
|
|
allowedNwInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The allowed network index"
|
|
::= { allowedNwInfoEntry 1 }
|
|
|
|
allowedNwInfoIpver OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address."
|
|
::= { allowedNwInfoEntry 2 }
|
|
|
|
allowedNwInfoVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN that the allowed network belongs to."
|
|
::= { allowedNwInfoEntry 3 }
|
|
|
|
allowedNwInfoBeginIpAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin IP address of the allowed network."
|
|
::= { allowedNwInfoEntry 4 }
|
|
|
|
allowedNwInfoEndIpAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begin IP address of the allowed network."
|
|
::= { allowedNwInfoEntry 5 }
|
|
|
|
allowedNwInfoNetMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of the allowed network."
|
|
::= { allowedNwInfoEntry 6 }
|
|
|
|
allowedNwInfoIp6Prefix OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix length of the IP6 allowed network."
|
|
::= { allowedNwInfoEntry 7 }
|
|
|
|
|
|
|
|
-- Ospfv3 Information
|
|
|
|
ospfv3GeneralInfo OBJECT IDENTIFIER ::= { ospfv3info 1 }
|
|
|
|
ospfv3RouterID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID for ospfv3."
|
|
::= { ospfv3GeneralInfo 1 }
|
|
|
|
ospfv3AdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ospfv3 ena/dis state."
|
|
::= { ospfv3GeneralInfo 2 }
|
|
|
|
ospfv3ASBRstatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASBR status for ospfv3."
|
|
::= { ospfv3GeneralInfo 3 }
|
|
|
|
ospfv3ABRStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ospfv3 ABR status."
|
|
::= { ospfv3GeneralInfo 4 }
|
|
|
|
ospfv3ASscopeLSAcnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count for AS scope LSA."
|
|
::= { ospfv3GeneralInfo 5 }
|
|
|
|
ospfv3RcvLSAcnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received LSA count for ospfv3."
|
|
::= { ospfv3GeneralInfo 6 }
|
|
|
|
ospfv3NewLSAcnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"New LSA count for ospfv3."
|
|
::= { ospfv3GeneralInfo 7 }
|
|
|
|
ospfv3MulticstExt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast extentions for ospfv3."
|
|
::= { ospfv3GeneralInfo 8 }
|
|
|
|
ospfv3AreaInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3AreaInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Area information."
|
|
::= { ospfv3info 2 }
|
|
|
|
ospfv3AreaInfoEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3AreaInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPFv3 area."
|
|
INDEX { ospfv3AreaInfoIndex }
|
|
::= { ospfv3AreaInfoTable 1 }
|
|
|
|
Ospfv3AreaInfoEntry ::= SEQUENCE {
|
|
ospfv3AreaInfoIndex Integer32,
|
|
ospfv3AreaInfoID IpAddress,
|
|
ospfv3AreaInfoImportAsExtern INTEGER,
|
|
ospfv3AreaInfoSPF Integer32,
|
|
ospfv3AreaInfoABRs Integer32,
|
|
ospfv3AreaInfoASBRs Integer32,
|
|
ospfv3AreaInfoLSAS Integer32,
|
|
ospfv3AreaInfoSummary Integer32,
|
|
ospfv3AreaInfoStubMetric Integer32,
|
|
ospfv3AreaInfoAreaTableCounter Integer32,
|
|
ospfv3AreaInfoAreaLSDBTabletCounter Integer32
|
|
}
|
|
|
|
ospfv3AreaInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 area number for which the OSPF info table is
|
|
|
|
related."
|
|
::= { ospfv3AreaInfoEntry 1}
|
|
|
|
ospfv3AreaInfoID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the OSPFv3 area."
|
|
::= { ospfv3AreaInfoEntry 2}
|
|
|
|
ospfv3AreaInfoImportAsExtern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
importExternal(0),
|
|
importNoExternal(1),
|
|
importNssa(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 area Import as Extern status."
|
|
::= { ospfv3AreaInfoEntry 3}
|
|
|
|
ospfv3AreaInfoSPF OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of SPF Runs"
|
|
::= { ospfv3AreaInfoEntry 4}
|
|
|
|
ospfv3AreaInfoABRs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Reachable ABRs"
|
|
::= { ospfv3AreaInfoEntry 5}
|
|
|
|
ospfv3AreaInfoASBRs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Reachable ASBRs"
|
|
::= { ospfv3AreaInfoEntry 6}
|
|
|
|
ospfv3AreaInfoLSAS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Area Scope LSAs."
|
|
::= { ospfv3AreaInfoEntry 7}
|
|
|
|
ospfv3AreaInfoSummary OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Area Summary."
|
|
::= { ospfv3AreaInfoEntry 8}
|
|
|
|
ospfv3AreaInfoStubMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Stub Metric."
|
|
::= { ospfv3AreaInfoEntry 9}
|
|
|
|
ospfv3AreaInfoAreaTableCounter OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Area Table counter ."
|
|
::= { ospfv3AreaInfoEntry 10}
|
|
|
|
ospfv3AreaInfoAreaLSDBTabletCounter OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Area Table counter ."
|
|
::= { ospfv3AreaInfoEntry 11}
|
|
|
|
ospfv3IfInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3IfInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Interface information."
|
|
::= { ospfv3info 3 }
|
|
|
|
ospfv3IfInfoEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3IfInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPFv3 Interface."
|
|
INDEX { ospfv3IfInfoIndex }
|
|
::= { ospfv3IfInfoTable 1 }
|
|
|
|
Ospfv3IfInfoEntry ::= SEQUENCE {
|
|
ospfv3IfInfoIndex Integer32,
|
|
ospfv3IfInfoVlan Integer32,
|
|
ospfv3IfInfoAreaID IpAddress,
|
|
ospfv3IfInfoAdminStat INTEGER,
|
|
ospfv3IfInfoPrio Integer32,
|
|
ospfv3IfInfoTransitDelay Integer32,
|
|
ospfv3IfInfoRetransInterval Integer32,
|
|
ospfv3IfInfoRtrDeadInterval Integer32,
|
|
ospfv3IfInfoHelloInterval Integer32,
|
|
ospfv3IfInfoPollInterval Integer32,
|
|
ospfv3IfInfoCost Integer32,
|
|
ospfv3IfInfoDrid IpAddress,
|
|
ospfv3IfInfoBdrid IpAddress,
|
|
ospfv3IfInfoIfState INTEGER
|
|
}
|
|
|
|
ospfv3IfInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface number for which the OSPF info table is related."
|
|
::= { ospfv3IfInfoEntry 1}
|
|
|
|
ospfv3IfInfoVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface VLAN for which the OSPF info table is related."
|
|
::= { ospfv3IfInfoEntry 2}
|
|
|
|
ospfv3IfInfoAreaID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the OSPFv3 info ."
|
|
::= { ospfv3IfInfoEntry 3}
|
|
|
|
ospfv3IfInfoAdminStat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Info admin state."
|
|
::= { ospfv3IfInfoEntry 4}
|
|
|
|
ospfv3IfInfoPrio OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface priority."
|
|
::= { ospfv3IfInfoEntry 5}
|
|
|
|
ospfv3IfInfoTransitDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface transit delay ."
|
|
::= { ospfv3IfInfoEntry 6}
|
|
|
|
ospfv3IfInfoRetransInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface retransit interval."
|
|
::= { ospfv3IfInfoEntry 7}
|
|
|
|
ospfv3IfInfoRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface dead interval ."
|
|
::= { ospfv3IfInfoEntry 8}
|
|
|
|
ospfv3IfInfoHelloInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface hello interval."
|
|
::= { ospfv3IfInfoEntry 9}
|
|
|
|
ospfv3IfInfoPollInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface poll interval ."
|
|
::= { ospfv3IfInfoEntry 10}
|
|
|
|
ospfv3IfInfoCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface cost."
|
|
::= { ospfv3IfInfoEntry 11}
|
|
|
|
ospfv3IfInfoDrid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface cost."
|
|
::= { ospfv3IfInfoEntry 12}
|
|
|
|
ospfv3IfInfoBdrid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface cost."
|
|
::= { ospfv3IfInfoEntry 13}
|
|
|
|
ospfv3IfInfoIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unkn(0),
|
|
down(1),
|
|
lpbk(2),
|
|
wtng(3),
|
|
ppp (4),
|
|
dr (5),
|
|
bdr(6),
|
|
other(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Info interface state."
|
|
::= { ospfv3IfInfoEntry 14}
|
|
|
|
-- OSPFv3 Interface/Nbr Info Table
|
|
|
|
ospfv3IfNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Ospfv3IfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of OSPFv3 Interface Neighbour information."
|
|
::= { ospfv3info 4 }
|
|
|
|
ospfv3IfNbrEntry OBJECT-TYPE
|
|
SYNTAX Ospfv3IfNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a OSPFv3 interface, neighbour pair."
|
|
INDEX { ospfv3IfNbrVlanID, ospfv3IfNbrIpAddr }
|
|
::= { ospfv3IfNbrTable 1 }
|
|
|
|
Ospfv3IfNbrEntry ::= SEQUENCE {
|
|
ospfv3IfNbrVlanID Integer32,
|
|
ospfv3IfNbrIpAddr IpAddress,
|
|
ospfv3IfNbrAddr DisplayString,
|
|
ospfv3IfNbrAreaID IpAddress,
|
|
ospfv3IfNbrIntfIndex Integer32,
|
|
ospfv3IfNbrOption Integer32,
|
|
ospfv3IfNbrPriority Integer32,
|
|
ospfv3IfNbrState INTEGER,
|
|
ospfv3IfNbrNo Integer32
|
|
}
|
|
|
|
ospfv3IfNbrVlanID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VlanID to which the OSPFv3 neighbour is associated."
|
|
::= { ospfv3IfNbrEntry 1 }
|
|
|
|
ospfv3IfNbrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Neighbour ID ."
|
|
::= { ospfv3IfNbrEntry 2 }
|
|
|
|
ospfv3IfNbrAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the neighbor associated with
|
|
the local link."
|
|
::= { ospfv3IfNbrEntry 3 }
|
|
|
|
ospfv3IfNbrAreaID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area ID of the OSPFv3 neighbour."
|
|
::= { ospfv3IfNbrEntry 4 }
|
|
|
|
ospfv3IfNbrIntfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface number for which this Interface/Nbr table is
|
|
related."
|
|
::= { ospfv3IfNbrEntry 5}
|
|
|
|
ospfv3IfNbrOption OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask corresponding to the neighbor's
|
|
options field."
|
|
::= { ospfv3IfNbrEntry 6 }
|
|
|
|
ospfv3IfNbrPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of the OSPFv3 neighbour."
|
|
::= { ospfv3IfNbrEntry 7 }
|
|
|
|
ospfv3IfNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
attempt(2),
|
|
init(3),
|
|
twoway(4),
|
|
exStart(5),
|
|
exchange(6),
|
|
loading(7),
|
|
full(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the OSPFv3 neighbour."
|
|
::= { ospfv3IfNbrEntry 8 }
|
|
|
|
ospfv3IfNbrNo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of OSPFv3 Neighbour."
|
|
::= { ospfv3IfNbrEntry 9 }
|
|
|
|
-- HA Informations
|
|
|
|
haServiceInfo OBJECT IDENTIFIER ::= { haInfo 1 }
|
|
|
|
haServiceInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of HA Service informations."
|
|
::= { haServiceInfo 1 }
|
|
|
|
haServiceInfoEntry OBJECT-TYPE
|
|
SYNTAX HaServiceInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular HA Service."
|
|
INDEX { haServiceInfoIndex }
|
|
::= { haServiceInfoTable 1 }
|
|
|
|
HaServiceInfoEntry ::= SEQUENCE {
|
|
haServiceInfoIndex DisplayString,
|
|
haServiceInfoState INTEGER,
|
|
haGroupInfoState DisplayString
|
|
}
|
|
|
|
haServiceInfoIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service index in alphanumeric."
|
|
::= { haServiceInfoEntry 1 }
|
|
|
|
haServiceInfoState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable HA service group."
|
|
::= { haServiceInfoEntry 2 }
|
|
|
|
haGroupInfoState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The HA service group state Init/Backup/Master/Holdoff."
|
|
::= { haServiceInfoEntry 3 }
|
|
|
|
-- HA Switch Info
|
|
haSwitchInfo OBJECT IDENTIFIER ::= { haInfo 2 }
|
|
|
|
haSwitchInfoState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The HA switch state Init/Backup/Master/Holdoff."
|
|
::= { haSwitchInfo 1 }
|
|
-- HA command menu
|
|
|
|
haCurCfgMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
vrrp(2),
|
|
switch(3),
|
|
service(4),
|
|
extendedHA(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high availability mode."
|
|
::= { haCfg 1 }
|
|
|
|
haNewCfgMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
vrrp(2),
|
|
switch(3),
|
|
service(4),
|
|
extendedHA(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high availability mode."
|
|
::= { haCfg 2 }
|
|
|
|
haCurCfgHoldoffTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The holdoff time."
|
|
::= { haCfg 3 }
|
|
|
|
haNewCfgHoldoffTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The holdoff time."
|
|
::= { haCfg 4 }
|
|
|
|
-- HA Switch menu
|
|
|
|
haSwitch OBJECT IDENTIFIER ::= { haCfg 5 }
|
|
|
|
haSwitchCurCfgPref OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
standby(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preferred initial state."
|
|
::= { haSwitch 1 }
|
|
|
|
haSwitchNewCfgPref OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
standby(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preferred initial state."
|
|
::= { haSwitch 2 }
|
|
|
|
|
|
haSwitchCurCfgFailBackMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
onfailure(1),
|
|
always(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fail back mode."
|
|
::= { haSwitch 3 }
|
|
|
|
haSwitchNewCfgFailBackMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
onfailure(1),
|
|
always(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fail back mode."
|
|
::= { haSwitch 4 }
|
|
|
|
haSwitchCurCfgAdvIfsMapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertisement interfaces present in the out map list.
|
|
The advertisement interfaces maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Ifmap 9
|
|
|| ||
|
|
|| ||___ Ifmap 8
|
|
|| |____ Ifmap 7
|
|
|| . . .
|
|
||_________ Ifmap 2
|
|
|__________ Ifmap 1
|
|
|
|
where x : 1 - The represented advertisement interface map is selected
|
|
0 - The represented advertisement interface map is not selected"
|
|
::= { haSwitch 5 }
|
|
|
|
haSwitchNewCfgAdvIfsMapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertisement interfaces present in the out map list.
|
|
The advertisement interfaces maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Ifmap 9
|
|
|| ||
|
|
|| ||___ Ifmap 8
|
|
|| |____ Ifmap 7
|
|
|| . . .
|
|
||_________ Ifmap 2
|
|
|__________ Ifmap 1
|
|
|
|
where x : 1 - The represented advertisement interfaces map is selected
|
|
0 - The represented advertisement interfaces map is not selected"
|
|
::= { haSwitch 6 }
|
|
|
|
haSwitchNewCfgAddIf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add interface for HA communication between the devices."
|
|
::= { haSwitch 7 }
|
|
|
|
haSwitchNewCfgRemIf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remove interface for HA communication between the devices."
|
|
::= { haSwitch 8 }
|
|
|
|
haSwitchCurCfgAdver OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertisement Interval."
|
|
::= { haSwitch 9 }
|
|
|
|
haSwitchNewCfgAdver OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertisement Interval."
|
|
::= { haSwitch 10 }
|
|
|
|
|
|
haSwitchCurCfgOrder OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The failover order group."
|
|
::= { haSwitch 12 }
|
|
|
|
haSwitchNewCfgOrder OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The failover order group."
|
|
::= { haSwitch 13 }
|
|
|
|
-- HA Trigger menu
|
|
|
|
haTrigger OBJECT IDENTIFIER ::= { haSwitch 11 }
|
|
|
|
|
|
haSwitchCurCfgTriggerl4Reals OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking L4 real servers."
|
|
::= { haTrigger 1 }
|
|
haSwitchNewCfgTriggerl4Reals OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking L4 real servers."
|
|
::= { haTrigger 2 }
|
|
|
|
-- HA Trigger Ifs menu
|
|
|
|
haTriggerIfs OBJECT IDENTIFIER ::= { haTrigger 3 }
|
|
|
|
haSwitchNewCfgTrigIfTrackAdd OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add interface to tracking list."
|
|
::= { haTriggerIfs 1 }
|
|
|
|
haSwitchNewCfgTrigIfTrackExclude OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Exclude interface from tracking list."
|
|
::= { haTriggerIfs 2 }
|
|
|
|
haSwitchCurCfgTrackIfsMapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tracking interfaces present in the out map list.
|
|
The tracking interfaces maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Ifmap 9
|
|
|| ||
|
|
|| ||___ Ifmap 8
|
|
|| |____ Ifmap 7
|
|
|| . . .
|
|
||_________ Ifmap 2
|
|
|__________ Ifmap 1
|
|
|
|
where x : 1 - The represented tracking interfaces map is selected
|
|
0 - The represented tracking interfaces map is not selected"
|
|
::= { haTriggerIfs 3 }
|
|
|
|
haSwitchNewCfgTrackIfsMapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tracking interfaces present in the out map list.
|
|
The tracking interfaces maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Ifmap 9
|
|
|| ||
|
|
|| ||___ Ifmap 8
|
|
|| |____ Ifmap 7
|
|
|| . . .
|
|
||_________ Ifmap 2
|
|
|__________ Ifmap 1
|
|
|
|
where x : 1 - The represented tracking interface map is selected
|
|
0 - The represented tracking interface map is not selected"
|
|
::= { haTriggerIfs 4 }
|
|
|
|
|
|
-- HA Gateway track menu
|
|
|
|
haGwTrack OBJECT IDENTIFIER ::= { haTrigger 4 }
|
|
|
|
haSwitchCurCfgTrigGwTrackState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable gateway tracking."
|
|
::= { haGwTrack 1 }
|
|
|
|
haSwitchNewCfgTrigGwTrackState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable gateway tracking."
|
|
::= { haGwTrack 2 }
|
|
|
|
haSwitchNewCfgTrigGwTrackAdd OBJECT-TYPE
|
|
SYNTAX INTEGER (1..259)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add gateway to tracking list."
|
|
::= { haGwTrack 3 }
|
|
|
|
haSwitchNewCfgTrigGwTrackExclude OBJECT-TYPE
|
|
SYNTAX INTEGER (1..259)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Exclude gateway to tracking list."
|
|
::= { haGwTrack 4 }
|
|
|
|
haSwitchCurCfgTrackGwsMapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tracking gateways present in the out map list.
|
|
The tracking gateways maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Gwmap 9
|
|
|| ||
|
|
|| ||___ Gwmap 8
|
|
|| |____ Gwmap 7
|
|
|| . . .
|
|
||_________ Gwmap 2
|
|
|__________ Gwmap 1
|
|
|
|
where x : 1 - The represented tracking gateways is selected
|
|
0 - The represented tracking gateways map is not selected"
|
|
::= { haGwTrack 5 }
|
|
|
|
haSwitchNewCfgTrackGwsMapList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tracking gateways present in the out map list.
|
|
The tracking gateways maps are presented in a bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ Gwmap 9
|
|
|| ||
|
|
|| ||___ Gwmap 8
|
|
|| |____ Gwmap 7
|
|
|| . . .
|
|
||_________ Gwmap 2
|
|
|__________ Gwmap 1
|
|
|
|
where x : 1 - The represented tracking gateways map is selected
|
|
0 - The represented tracking gateways map is not selected"
|
|
::= { haGwTrack 6 }
|
|
|
|
-- HA Switch Real track menu
|
|
|
|
haTriggerReals OBJECT IDENTIFIER ::= { haTrigger 5 }
|
|
|
|
haSwitchCurCfgTriggerNewl4Reals OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable real server tracking."
|
|
::= { haTriggerReals 1 }
|
|
|
|
haSwitchNewCfgTriggerNewl4Reals OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable real server tracking."
|
|
::= { haTriggerReals 2 }
|
|
|
|
haSwitchCurCfgTriggerAllReml4Reals OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aadd(1),
|
|
arem(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aadd - to add all the real servers to tracking.
|
|
arem - to remove all the real servers from tracking."
|
|
::= { haTriggerReals 3 }
|
|
|
|
haSwitchNewCfgTriggerAllReml4Reals OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aadd(1),
|
|
arem(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aadd - to add all the real servers to tracking.
|
|
arem - to remove all the real servers from tracking."
|
|
::= { haTriggerReals 4 }
|
|
|
|
haSwitchCurCfgTriggerListl4Reals OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Real servers in the group. The servers are presented
|
|
in bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
| || |_ server 9
|
|
| ||
|
|
| ||___ server 8
|
|
| |____ server 7
|
|
| . . .
|
|
|__________ server 1
|
|
|
|
where x : 1 - The represented server belongs to the group
|
|
0 - The represented server does not belong to the group"
|
|
::= { haTriggerReals 5 }
|
|
|
|
haSwitchNewCfgTriggerListl4Reals OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Real servers in the group. The servers are presented
|
|
in bitmap format.
|
|
|
|
in receiving order:
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
| || |_ server 9
|
|
| ||
|
|
| ||___ server 8
|
|
| |____ server 7
|
|
| . . .
|
|
|__________ server 1
|
|
|
|
where x : 1 - The represented server belongs to the group
|
|
0 - The represented server does not belong to the group"
|
|
::= { haTriggerReals 6 }
|
|
|
|
haSwitchNewCfgTriggerAddl4Reals OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The real server to be added to the group. When read, 0 is returned."
|
|
::= { haTriggerReals 7 }
|
|
|
|
haSwitchNewCfgTriggerRemovel4Reals OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The real server to be removed from the group. When read, 0 is returned."
|
|
::= { haTriggerReals 8 }
|
|
|
|
-- Real association to the switch HA Group
|
|
|
|
haSwitchRealTrkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaSwitchRealTrkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of Real to HA switch group."
|
|
::= { haTrigger 6 }
|
|
|
|
haSwitchRealTrkEntry OBJECT-TYPE
|
|
SYNTAX HaSwitchRealTrkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a real to HA group."
|
|
INDEX { haSwitchRealTrkIndex }
|
|
::= { haSwitchRealTrkTable 1 }
|
|
|
|
HaSwitchRealTrkEntry ::= SEQUENCE {
|
|
haSwitchRealTrkIndex DisplayString
|
|
}
|
|
|
|
haSwitchRealTrkIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Real ID number in alphanumeric."
|
|
::= { haSwitchRealTrkEntry 1 }
|
|
|
|
|
|
-- HA Floating IP Table
|
|
|
|
haFloatIpCurCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaFloatIpCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of Floating IP configurations."
|
|
::= { haCfg 6 }
|
|
|
|
haFloatIpCurCfgEntry OBJECT-TYPE
|
|
SYNTAX HaFloatIpCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular Floating IP configuration."
|
|
INDEX { haFloatIpCurCfgIndex }
|
|
::= { haFloatIpCurCfgTable 1 }
|
|
|
|
HaFloatIpCurCfgEntry ::= SEQUENCE {
|
|
haFloatIpCurCfgIndex DisplayString,
|
|
haFloatIpCurCfgIpVer INTEGER,
|
|
haFloatIpCurCfgIpAddr IpAddress,
|
|
haFloatIpCurCfgIpv6Addr DisplayString,
|
|
haFloatIpCurCfgIf INTEGER,
|
|
haFloatIpCurCfgState INTEGER
|
|
}
|
|
|
|
haFloatIpCurCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The floating IP number in alphanumeric."
|
|
::= { haFloatIpCurCfgEntry 1 }
|
|
|
|
haFloatIpCurCfgIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The floating IP version."
|
|
::= { haFloatIpCurCfgEntry 2 }
|
|
|
|
haFloatIpCurCfgIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The floating IP address."
|
|
::= { haFloatIpCurCfgEntry 3 }
|
|
|
|
haFloatIpCurCfgIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" IPV6 address of the floating IP identified by the instance of the haFloatIpCurCfgIndex.
|
|
Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in
|
|
any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx "
|
|
::= { haFloatIpCurCfgEntry 4 }
|
|
|
|
haFloatIpCurCfgIf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Floating IP interface."
|
|
::= { haFloatIpCurCfgEntry 5 }
|
|
|
|
haFloatIpCurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable floating IP."
|
|
::= { haFloatIpCurCfgEntry 6 }
|
|
|
|
haFloatIpNewCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaFloatIpNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of Floating IP configurations."
|
|
::= { haCfg 7 }
|
|
|
|
haFloatIpNewCfgEntry OBJECT-TYPE
|
|
SYNTAX HaFloatIpNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular Floating IP configuration."
|
|
INDEX { haFloatIpNewCfgIndex }
|
|
::= { haFloatIpNewCfgTable 1 }
|
|
|
|
HaFloatIpNewCfgEntry ::= SEQUENCE {
|
|
haFloatIpNewCfgIndex DisplayString,
|
|
haFloatIpNewCfgIpVer INTEGER,
|
|
haFloatIpNewCfgIpAddr IpAddress,
|
|
haFloatIpNewCfgIpv6Addr DisplayString,
|
|
haFloatIpNewCfgIf INTEGER,
|
|
haFloatIpNewCfgDelete INTEGER,
|
|
haFloatIpNewCfgState INTEGER
|
|
}
|
|
|
|
haFloatIpNewCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The floating IP number in alphanumeric."
|
|
::= { haFloatIpNewCfgEntry 1 }
|
|
|
|
haFloatIpNewCfgIpVer OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The floating IP version."
|
|
::= { haFloatIpNewCfgEntry 2 }
|
|
|
|
haFloatIpNewCfgIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The floating IP address."
|
|
::= { haFloatIpNewCfgEntry 3 }
|
|
|
|
haFloatIpNewCfgIpv6Addr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPV6 address of the floating IP identified by the instance of the haFloatIpNewCfgIndex.
|
|
Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in
|
|
any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx "
|
|
::= { haFloatIpNewCfgEntry 4 }
|
|
|
|
haFloatIpNewCfgIf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Floating IP interface."
|
|
::= { haFloatIpNewCfgEntry 5 }
|
|
|
|
haFloatIpNewCfgDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By setting the value to delete(2), the entire row is deleted."
|
|
::= { haFloatIpNewCfgEntry 6 }
|
|
|
|
haFloatIpNewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable floating IP."
|
|
::= { haFloatIpNewCfgEntry 7 }
|
|
|
|
-- HA Service menu
|
|
|
|
haService OBJECT IDENTIFIER ::= { haCfg 8 }
|
|
|
|
haServiceCurCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of HA Service configurations."
|
|
::= { haService 1 }
|
|
|
|
haServiceCurCfgEntry OBJECT-TYPE
|
|
SYNTAX HaServiceCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular HA Service configuration."
|
|
INDEX { haServiceCurCfgIndex }
|
|
::= { haServiceCurCfgTable 1 }
|
|
|
|
HaServiceCurCfgEntry ::= SEQUENCE {
|
|
haServiceCurCfgIndex DisplayString,
|
|
haServiceCurCfgPref INTEGER,
|
|
haServiceCurCfgPref INTEGER,
|
|
haServiceCurCfgFailBackMode INTEGER,
|
|
haServiceCurCfgAdver INTEGER,
|
|
haServiceCurCfgState INTEGER
|
|
|
|
}
|
|
|
|
haServiceCurCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service index in alphanumeric."
|
|
::= { haServiceCurCfgEntry 1 }
|
|
|
|
|
|
haServiceCurCfgPref OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
standby(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preferred initial state."
|
|
::= { haServiceCurCfgEntry 2 }
|
|
|
|
haServiceCurCfgFailBackMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
onfailure(1),
|
|
always(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fail back mode."
|
|
::= { haServiceCurCfgEntry 3 }
|
|
|
|
haServiceCurCfgAdver OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertisement Interval."
|
|
::= { haServiceCurCfgEntry 4 }
|
|
|
|
haServiceCurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable HA service group."
|
|
::= { haServiceCurCfgEntry 5 }
|
|
|
|
haServiceNewCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of HA Service configurations."
|
|
::= { haService 2 }
|
|
|
|
haServiceNewCfgEntry OBJECT-TYPE
|
|
SYNTAX HaServiceNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular HA Service configuration."
|
|
INDEX { haServiceNewCfgIndex }
|
|
::= { haServiceNewCfgTable 1 }
|
|
|
|
HaServiceNewCfgEntry ::= SEQUENCE {
|
|
haServiceNewCfgIndex DisplayString,
|
|
haServiceNewCfgPref INTEGER,
|
|
haServiceNewCfgPref INTEGER,
|
|
haServiceNewCfgFailBackMode INTEGER,
|
|
haServiceNewCfgAddIf INTEGER,
|
|
haServiceNewCfgRemIf INTEGER,
|
|
haServiceNewCfgAddFip DisplayString,
|
|
haServiceNewCfgRemFip DisplayString,
|
|
haServiceNewCfgAddVip DisplayString,
|
|
haServiceNewCfgRemVip DisplayString,
|
|
haServiceNewCfgAdver INTEGER,
|
|
haServiceNewCfgDelete INTEGER,
|
|
haServiceNewCfgState INTEGER
|
|
|
|
}
|
|
|
|
haServiceNewCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceNewCfgEntry 1 }
|
|
|
|
|
|
haServiceNewCfgPref OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
standby(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preferred initial state."
|
|
::= { haServiceNewCfgEntry 2 }
|
|
|
|
haServiceNewCfgFailBackMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
onfailure(1),
|
|
always(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fail back mode."
|
|
::= { haServiceNewCfgEntry 3 }
|
|
|
|
haServiceNewCfgAddIf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add interface for HA communication between the devices."
|
|
::= { haServiceNewCfgEntry 4 }
|
|
|
|
haServiceNewCfgRemIf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remove interface from HA communication between the devices."
|
|
::= { haServiceNewCfgEntry 5 }
|
|
|
|
haServiceNewCfgAddFip OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add Floating IP to HA group."
|
|
::= { haServiceNewCfgEntry 6 }
|
|
|
|
haServiceNewCfgRemFip OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remove Floating IP from HA group."
|
|
::= { haServiceNewCfgEntry 7 }
|
|
|
|
haServiceNewCfgAddVip OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add VIP to HA group."
|
|
::= { haServiceNewCfgEntry 8 }
|
|
|
|
haServiceNewCfgRemVip OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remove VIP from HA group."
|
|
::= { haServiceNewCfgEntry 9 }
|
|
|
|
haServiceNewCfgAdver OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertisement Interval."
|
|
::= { haServiceNewCfgEntry 10 }
|
|
|
|
haServiceNewCfgDelete OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By setting the value to delete(2), the entire HA group is deleted."
|
|
::= { haServiceNewCfgEntry 11 }
|
|
|
|
haServiceNewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable HA service group."
|
|
::= { haServiceNewCfgEntry 12 }
|
|
|
|
|
|
haServiceVipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceVipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of VIP to HA group."
|
|
::= { haService 3 }
|
|
|
|
haServiceVipEntry OBJECT-TYPE
|
|
SYNTAX HaServiceVipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a VIP to HA group."
|
|
INDEX { haServiceIndex,haServiceVipIndex }
|
|
::= { haServiceVipTable 1 }
|
|
|
|
HaServiceVipEntry ::= SEQUENCE {
|
|
haServiceIndex DisplayString,
|
|
haServiceVipIndex DisplayString
|
|
|
|
|
|
}
|
|
|
|
haServiceIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceVipEntry 1 }
|
|
|
|
haServiceVipIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The virtual ID number in alphanumeric."
|
|
::= { haServiceVipEntry 2 }
|
|
|
|
|
|
haServiceFipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceFipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of FIP to HA group."
|
|
::= { haService 4 }
|
|
|
|
haServiceFipEntry OBJECT-TYPE
|
|
SYNTAX HaServiceFipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a FIP to HA group."
|
|
INDEX { haServiceFipIndex,haFipIndex }
|
|
::= { haServiceFipTable 1 }
|
|
|
|
HaServiceFipEntry ::= SEQUENCE {
|
|
haServiceFipIndex DisplayString,
|
|
haFipIndex DisplayString
|
|
}
|
|
|
|
haServiceFipIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceFipEntry 1 }
|
|
|
|
haFipIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Floating IP ID number in alphanumeric."
|
|
::= { haServiceFipEntry 2 }
|
|
|
|
haServiceAdvIfsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceAdvIfsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of advertisement interface."
|
|
::= { haService 5 }
|
|
|
|
haServiceAdvIfsEntry OBJECT-TYPE
|
|
SYNTAX HaServiceAdvIfsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a advertisement interface."
|
|
INDEX { haServiceAdvIfIndex,haAdvIfIndex }
|
|
::= { haServiceAdvIfsTable 1 }
|
|
|
|
HaServiceAdvIfsEntry ::= SEQUENCE {
|
|
haServiceAdvIfIndex DisplayString,
|
|
haAdvIfIndex INTEGER
|
|
}
|
|
|
|
haServiceAdvIfIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceAdvIfsEntry 1 }
|
|
|
|
haAdvIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advertisement interface number."
|
|
::= { haServiceAdvIfsEntry 2 }
|
|
|
|
-- HA Service Trigger menu
|
|
|
|
haServiceTrigger OBJECT IDENTIFIER ::= { haService 6 }
|
|
|
|
haServiceTriggerCurCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceTriggerCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of trigger configurations."
|
|
::= { haServiceTrigger 1 }
|
|
|
|
haServiceTriggerCurCfgEntry OBJECT-TYPE
|
|
SYNTAX HaServiceTriggerCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular trigger configuration."
|
|
INDEX { haServiceTriggerCurCfgIndex }
|
|
::= { haServiceTriggerCurCfgTable 1 }
|
|
|
|
HaServiceTriggerCurCfgEntry ::= SEQUENCE {
|
|
haServiceTriggerCurCfgIndex DisplayString,
|
|
haServiceTriggerCurCfgl4Reals INTEGER
|
|
}
|
|
|
|
haServiceTriggerCurCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceTriggerCurCfgEntry 1 }
|
|
|
|
haServiceTriggerCurCfgl4Reals OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking L4 real servers."
|
|
::= { haServiceTriggerCurCfgEntry 2 }
|
|
|
|
haServiceTriggerNewCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceTriggerNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of trigger configurations."
|
|
::= { haServiceTrigger 2 }
|
|
|
|
haServiceTriggerNewCfgEntry OBJECT-TYPE
|
|
SYNTAX HaServiceTriggerNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular trigger configuration."
|
|
INDEX { haServiceTriggerNewCfgIndex }
|
|
::= { haServiceTriggerNewCfgTable 1 }
|
|
|
|
HaServiceTriggerNewCfgEntry ::= SEQUENCE {
|
|
haServiceTriggerNewCfgIndex DisplayString,
|
|
haServiceTriggerNewCfgl4Reals INTEGER
|
|
}
|
|
|
|
haServiceTriggerNewCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceTriggerNewCfgEntry 1 }
|
|
|
|
haServiceTriggerNewCfgl4Reals OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable tracking L4 real servers."
|
|
::= { haServiceTriggerNewCfgEntry 2 }
|
|
|
|
-- HA Service Trigger Ifs menu
|
|
|
|
haServiceTriggerIfs OBJECT IDENTIFIER ::= { haServiceTrigger 3 }
|
|
|
|
haServiceTriggerIfsNewCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceTriggerIfsNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of tracking interface configurations."
|
|
::= { haServiceTriggerIfs 1 }
|
|
|
|
haServiceTriggerIfsNewCfgEntry OBJECT-TYPE
|
|
SYNTAX HaServiceTriggerIfsNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular tracking interface configuration."
|
|
INDEX { haServiceTriggerIfsNewCfgIndex }
|
|
::= { haServiceTriggerIfsNewCfgTable 1 }
|
|
|
|
HaServiceTriggerIfsNewCfgEntry ::= SEQUENCE {
|
|
haServiceTriggerIfsNewCfgIndex DisplayString,
|
|
haServiceNewCfgTrigIfTrackAdd INTEGER,
|
|
haServiceNewCfgTrigIfTrackExclude INTEGER
|
|
}
|
|
|
|
haServiceTriggerIfsNewCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceTriggerIfsNewCfgEntry 1 }
|
|
|
|
|
|
haServiceNewCfgTrigIfTrackAdd OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add interface to tracking list."
|
|
::= { haServiceTriggerIfsNewCfgEntry 2 }
|
|
|
|
haServiceTrackIfsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceTrackIfsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of tracking interface."
|
|
::= { haServiceTriggerIfs 2 }
|
|
|
|
haServiceTrackIfsEntry OBJECT-TYPE
|
|
SYNTAX HaServiceTrackIfsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a tracking interface."
|
|
INDEX { haServiceTrackIfIndex,haTrackIfIndex }
|
|
::= { haServiceTrackIfsTable 1 }
|
|
|
|
HaServiceTrackIfsEntry ::= SEQUENCE {
|
|
haServiceTrackIfIndex DisplayString,
|
|
haTrackIfIndex INTEGER
|
|
}
|
|
|
|
haServiceTrackIfIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceTrackIfsEntry 1 }
|
|
|
|
haTrackIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tracking interface number."
|
|
::= { haServiceTrackIfsEntry 2 }
|
|
|
|
-- HA Gateway track menu
|
|
|
|
haServiceGwTrack OBJECT IDENTIFIER ::= { haServiceTrigger 4 }
|
|
|
|
haServiceTriggerGwCurCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceTriggerGwCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of gateway tracking configurations."
|
|
::= { haServiceGwTrack 1 }
|
|
|
|
haServiceTriggerGwCurCfgEntry OBJECT-TYPE
|
|
SYNTAX HaServiceTriggerGwCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular gateway tracking configuration."
|
|
INDEX { haServiceTriggerGwCurCfgIndex }
|
|
::= { haServiceTriggerGwCurCfgTable 1 }
|
|
|
|
HaServiceTriggerGwCurCfgEntry ::= SEQUENCE {
|
|
haServiceTriggerGwCurCfgIndex DisplayString,
|
|
haServiceCurCfgTrigGwTrackState INTEGER
|
|
}
|
|
|
|
haServiceTriggerGwCurCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceTriggerGwCurCfgEntry 1 }
|
|
|
|
|
|
haServiceCurCfgTrigGwTrackState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable gateway tracking."
|
|
::= { haServiceTriggerGwCurCfgEntry 2 }
|
|
|
|
haServiceTriggerGwNewCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceTriggerGwNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of trigger gateway configurations."
|
|
::= { haServiceGwTrack 2 }
|
|
|
|
haServiceTriggerGwNewCfgEntry OBJECT-TYPE
|
|
SYNTAX HaServiceTriggerGwNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a trigger gateway configuration."
|
|
INDEX { haServiceTriggerGwNewCfgIndex }
|
|
::= { haServiceTriggerGwNewCfgTable 1 }
|
|
|
|
HaServiceTriggerGwNewCfgEntry ::= SEQUENCE {
|
|
haServiceTriggerGwNewCfgIndex DisplayString,
|
|
haServiceNewCfgTrigGwTrackState INTEGER,
|
|
haServiceNewCfgTrigGwTrackAdd INTEGER,
|
|
haServiceNewCfgTrigGwTrackExclude INTEGER
|
|
}
|
|
|
|
haServiceTriggerGwNewCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceTriggerGwNewCfgEntry 1 }
|
|
|
|
haServiceNewCfgTrigGwTrackState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable gateway tracking."
|
|
::= { haServiceTriggerGwNewCfgEntry 2 }
|
|
|
|
haServiceNewCfgTrigGwTrackAdd OBJECT-TYPE
|
|
SYNTAX INTEGER (1..259)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add gateway to tracking list."
|
|
::= { haServiceTriggerGwNewCfgEntry 3 }
|
|
|
|
haServiceNewCfgTrigGwTrackExclude OBJECT-TYPE
|
|
SYNTAX INTEGER (1..259)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Exclude gateway to tracking list."
|
|
::= { haServiceTriggerGwNewCfgEntry 4 }
|
|
|
|
haServiceNewCfgTrigIfTrackExclude OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Exclude interface from tracking list."
|
|
::= { haServiceTriggerIfsNewCfgEntry 3 }
|
|
|
|
haServiceTrackGwsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceTrackGwsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of gateway tracking list."
|
|
::= { haServiceGwTrack 3 }
|
|
|
|
haServiceTrackGwsEntry OBJECT-TYPE
|
|
SYNTAX HaServiceTrackGwsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about gateway tracking list."
|
|
INDEX { haServiceTrackGwIndex,haTrackGwIndex }
|
|
::= { haServiceTrackGwsTable 1 }
|
|
|
|
HaServiceTrackGwsEntry ::= SEQUENCE {
|
|
haServiceTrackGwIndex DisplayString,
|
|
haTrackGwIndex INTEGER
|
|
}
|
|
|
|
haServiceTrackGwIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceTrackGwsEntry 1 }
|
|
|
|
haTrackGwIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Added gateway to tracking list."
|
|
::= { haServiceTrackGwsEntry 2 }
|
|
|
|
-- HA Real Tracking
|
|
|
|
haServiceRealTrack OBJECT IDENTIFIER ::= { haServiceTrigger 5 }
|
|
|
|
haServiceTriggerRealCurCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceTriggerRealCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of real tracking configurations."
|
|
::= { haServiceRealTrack 1 }
|
|
|
|
haServiceTriggerRealCurCfgEntry OBJECT-TYPE
|
|
SYNTAX HaServiceTriggerRealCurCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular real tracking configuration."
|
|
|
|
INDEX { haServiceTriggerRealCurCfgIndex }
|
|
::= { haServiceTriggerRealCurCfgTable 1 }
|
|
|
|
HaServiceTriggerRealCurCfgEntry ::= SEQUENCE {
|
|
haServiceTriggerRealCurCfgIndex DisplayString,
|
|
haServiceCurCfgTrigRealTrkState INTEGER,
|
|
haServiceCurCfgTrigAllRemRealState INTEGER,
|
|
haServiceCurCfgTrigRealTrkAutoOptState INTEGER
|
|
}
|
|
|
|
haServiceTriggerRealCurCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceTriggerRealCurCfgEntry 1 }
|
|
|
|
haServiceCurCfgTrigRealTrkState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable real tracking."
|
|
::= { haServiceTriggerRealCurCfgEntry 2 }
|
|
|
|
haServiceCurCfgTrigAllRemRealState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aadd(1),
|
|
arem(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aadd - to add all the real servers to tracking.
|
|
arem - to remove all the real servers from tracking."
|
|
::= { haServiceTriggerRealCurCfgEntry 3 }
|
|
|
|
haServiceCurCfgTrigRealTrkAutoOptState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AutoOpt Flag."
|
|
::= { haServiceTriggerRealCurCfgEntry 4 }
|
|
|
|
haServiceTriggerRealNewCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceTriggerRealNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of trigger real configurations."
|
|
::= { haServiceRealTrack 2 }
|
|
|
|
haServiceTriggerRealNewCfgEntry OBJECT-TYPE
|
|
SYNTAX HaServiceTriggerRealNewCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a trigger real configuration."
|
|
INDEX { haServiceTriggerRealNewCfgIndex }
|
|
::= { haServiceTriggerRealNewCfgTable 1 }
|
|
|
|
HaServiceTriggerRealNewCfgEntry ::= SEQUENCE {
|
|
haServiceTriggerRealNewCfgIndex DisplayString,
|
|
haServiceNewCfgTrigRealTrkState INTEGER,
|
|
haServiceNewCfgTrigAllRemRealState INTEGER,
|
|
haServiceNewCfgTrigAddReals DisplayString,
|
|
haServiceNewCfgTrigRemReals DisplayString,
|
|
haServiceNewCfgTrigRealTrkAutoOptState INTEGER
|
|
}
|
|
|
|
haServiceTriggerRealNewCfgIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceTriggerRealNewCfgEntry 1 }
|
|
|
|
|
|
haServiceNewCfgTrigRealTrkState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable real tracking."
|
|
::= { haServiceTriggerRealNewCfgEntry 2 }
|
|
|
|
haServiceNewCfgTrigAllRemRealState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aadd(1),
|
|
arem(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select aadd - to add all the real servers to tracking.
|
|
Select arem - to remove all the real servers from tracking."
|
|
::= { haServiceTriggerRealNewCfgEntry 3 }
|
|
|
|
|
|
haServiceNewCfgTrigAddReals OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The real server to be added to the group. When read, 0 is returned."
|
|
::= { haServiceTriggerRealNewCfgEntry 4 }
|
|
|
|
haServiceNewCfgTrigRemReals OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The real server to be removed to the group. When read, 0 is returned."
|
|
::= { haServiceTriggerRealNewCfgEntry 5 }
|
|
|
|
haServiceNewCfgTrigRealTrkAutoOptState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AutoOpt Flag."
|
|
::= { haServiceTriggerRealNewCfgEntry 6 }
|
|
|
|
|
|
-- HA Real association to the HA Group
|
|
|
|
haServiceRealTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaServiceRealEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of Real to HA group."
|
|
::= { haServiceTrigger 6 }
|
|
|
|
haServiceRealEntry OBJECT-TYPE
|
|
SYNTAX HaServiceRealEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a Real to HA group."
|
|
INDEX { haServiceGrpIndex,haServiceRealIndex }
|
|
::= { haServiceRealTable 1 }
|
|
|
|
HaServiceRealEntry ::= SEQUENCE {
|
|
haServiceGrpIndex DisplayString,
|
|
haServiceRealIndex DisplayString
|
|
}
|
|
|
|
haServiceGrpIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service ID number in alphanumeric."
|
|
::= { haServiceRealEntry 1 }
|
|
|
|
haServiceRealIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Real ID number in alphanumeric."
|
|
::= { haServiceRealEntry 2 }
|
|
|
|
-- HA Trunk/LACP up criteria
|
|
haTrunk OBJECT IDENTIFIER ::= { haCfg 9 }
|
|
|
|
haTrunkTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in HA trunk table."
|
|
::= { haTrunk 100 } -- I am sorry!!
|
|
|
|
haTrunkCurCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaTrunkCurCfgTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of HA Trunk UP criteria configuration."
|
|
::= { haTrunk 2 }
|
|
|
|
haTrunkCurCfgTableEntry OBJECT-TYPE
|
|
SYNTAX HaTrunkCurCfgTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the HA Trunk UP criteria configuration table."
|
|
INDEX { haTrunkCurCfgIndex }
|
|
::= { haTrunkCurCfgTable 1 }
|
|
|
|
HaTrunkCurCfgTableEntry ::= SEQUENCE {
|
|
haTrunkCurCfgIndex Integer32,
|
|
haTrunkCurCfgTrunkUpCriteria DisplayString
|
|
}
|
|
|
|
haTrunkCurCfgIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Trunk id."
|
|
::= { haTrunkCurCfgTableEntry 1 }
|
|
|
|
haTrunkCurCfgTrunkUpCriteria OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of port up criteria for the trunk."
|
|
::= { haTrunkCurCfgTableEntry 2 }
|
|
|
|
haTrunkNewCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaTrunkNewCfgTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of HA Trunk UP criteria configuration."
|
|
::= { haTrunk 3 }
|
|
|
|
haTrunkNewCfgTableEntry OBJECT-TYPE
|
|
SYNTAX HaTrunkNewCfgTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the HA Trunk UP criteria configuration table."
|
|
INDEX { haTrunkNewCfgIndex }
|
|
::= { haTrunkNewCfgTable 1 }
|
|
|
|
HaTrunkNewCfgTableEntry ::= SEQUENCE {
|
|
haTrunkNewCfgIndex Integer32,
|
|
haTrunkNewCfgTrunkUpCriteria DisplayString,
|
|
haTrunkNewCfgTrunkRemove INTEGER
|
|
}
|
|
|
|
haTrunkNewCfgIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Trunk id."
|
|
::= { haTrunkNewCfgTableEntry 1 }
|
|
|
|
haTrunkNewCfgTrunkUpCriteria OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of port up criteria for the trunk."
|
|
::= { haTrunkNewCfgTableEntry 2 }
|
|
|
|
haTrunkNewCfgTrunkRemove OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remove the minimum number of port up criteria for the trunk."
|
|
::= { haTrunkNewCfgTableEntry 3 }
|
|
|
|
haLacp OBJECT IDENTIFIER ::= { haCfg 10 }
|
|
|
|
haLacpTableMaxSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in the HA LACP adminkey configuration table.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haLacp 101 } -- I am so sorry!!
|
|
|
|
haLacpMaxAdminKey OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum possible LACP admin key value.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haLacp 102 } -- I am so so sorry!!
|
|
|
|
haLacpCurCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaLacpCurCfgTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of HA Lacp UP criteria configuration.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haLacp 3 }
|
|
|
|
haLacpCurCfgTableEntry OBJECT-TYPE
|
|
SYNTAX HaLacpCurCfgTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the HA Lacp UP criteria configuration table."
|
|
INDEX { haLacpCurCfgAdminKey }
|
|
::= { haLacpCurCfgTable 1 }
|
|
|
|
HaLacpCurCfgTableEntry ::= SEQUENCE {
|
|
haLacpCurCfgAdminKey Integer32,
|
|
haLacpCurCfgLacpUpCriteria DisplayString
|
|
}
|
|
|
|
haLacpCurCfgAdminKey OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Lacp Admin key id."
|
|
::= { haLacpCurCfgTableEntry 1 }
|
|
|
|
haLacpCurCfgLacpUpCriteria OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of port up criteria for the LACP admin key."
|
|
::= { haLacpCurCfgTableEntry 2 }
|
|
|
|
haLacpNewCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaLacpNewCfgTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of HA Lacp UP criteria configuration.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haLacp 4 }
|
|
|
|
haLacpNewCfgTableEntry OBJECT-TYPE
|
|
SYNTAX HaLacpNewCfgTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the HA Lacp UP criteria configuration table."
|
|
INDEX { haLacpNewCfgAdminKey }
|
|
::= { haLacpNewCfgTable 1 }
|
|
|
|
HaLacpNewCfgTableEntry ::= SEQUENCE {
|
|
haLacpNewCfgAdminKey Integer32,
|
|
haLacpNewCfgLacpUpCriteria DisplayString,
|
|
haLacpNewCfgLacpRemove INTEGER
|
|
}
|
|
|
|
haLacpNewCfgAdminKey OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Lacp Admin key id."
|
|
::= { haLacpNewCfgTableEntry 1 }
|
|
|
|
haLacpNewCfgLacpUpCriteria OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of port up criteria for the LACP admin key."
|
|
::= { haLacpNewCfgTableEntry 2 }
|
|
|
|
haLacpNewCfgLacpRemove OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remove the minimum number of port up criteria for the LACP admin key."
|
|
::= { haLacpNewCfgTableEntry 3 }
|
|
|
|
haCurLPWizardCfgMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
vrrp(2),
|
|
switch(3),
|
|
service(4),
|
|
extendedHA(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Change the High Availability Mode from the LP startup wizard.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haCfg 11 }
|
|
|
|
haNewLPWizardCfgMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
vrrp(2),
|
|
switch(3),
|
|
service(4),
|
|
extendedHA(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Change the High Availability Mode from the LP startup wizard.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haCfg 12 }
|
|
|
|
haCurCfgHAID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The HA ID for standalone device."
|
|
::= { haCfg 13 }
|
|
|
|
haNewCfgHAID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The HA ID for standalone device.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haCfg 14 }
|
|
|
|
haCurCfgBkpVipRt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable adding vip routes in backup device.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haCfg 15 }
|
|
|
|
haNewCfgBkpVipRt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable adding vip routes in backup device.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haCfg 16 }
|
|
|
|
haCurCfgFmac OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or Disable floating mac."
|
|
::= { haCfg 17 }
|
|
|
|
haNewCfgFmac OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or Disable floating mac."
|
|
::= { haCfg 18 }
|
|
|
|
haCurCfgNwClGarp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable sending GARP for all the proxy IPs in the network class range.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haCfg 19 }
|
|
|
|
haNewCfgNwClGarp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable sending GARP for all the proxy IPs in the network class range.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { haCfg 20 }
|
|
|
|
haCurCfgFailoverTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Failover delay time."
|
|
::= { haCfg 21 }
|
|
|
|
haNewCfgFailoverTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Failover delay time."
|
|
::= { haCfg 22 }
|
|
|
|
-- BFD MIBS START
|
|
|
|
bfdCurCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BFD global state.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 1 }
|
|
|
|
bfdNewCfgState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Globally turn BFD on or off.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 2 }
|
|
|
|
bfdCurCfgRxInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (100..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BFD control packets Rx interval (in milliseconds).
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 3 }
|
|
|
|
bfdNewCfgRxInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (100..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BFD control packets Rx interval (in milliseconds).
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 4 }
|
|
|
|
bfdCurCfgMultiplier OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of retries to declare the BFD neighbour DOWN.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 5 }
|
|
|
|
bfdNewCfgMultiplier OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of retries to declare the BFD neighbour DOWN.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 6 }
|
|
|
|
bfdCurCfgIfBmap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bitmap of interfaces currently configured for BFD in the device.
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ If 9
|
|
|| ||
|
|
|| ||___ If 8
|
|
|| |____ If 7
|
|
|| . . .
|
|
||_________ If 2
|
|
|__________ If 1
|
|
|
|
where x : 1 - The represented interface is selected,
|
|
0 - The represented interface is not selected
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 7 }
|
|
|
|
bfdNewCfgIfBmap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bitmap of interfaces newly configured for BFD in the device i.e
|
|
in new config (before apply).
|
|
|
|
OCTET 1 OCTET 2 .....
|
|
xxxxxxxx xxxxxxxx .....
|
|
|| || |_ If 9
|
|
|| ||
|
|
|| ||___ If 8
|
|
|| |____ If 7
|
|
|| . . .
|
|
||_________ If 2
|
|
|__________ If 1
|
|
|
|
where x : 1 - The represented interface is selected
|
|
0 - The represented interface is not selected
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 8 }
|
|
|
|
bfdNewCfgAddIf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add BFD interface. Returns 0 on SNMPGET.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 9 }
|
|
|
|
bfdNewCfgRemIf OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remove BFD interface. Returns 0 on SNMPGET.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bfdCfg 10 }
|
|
|
|
-- BFD MIBS END
|
|
|
|
-- L3 Operational commands
|
|
|
|
vrrpOperVirtRtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpOperVirtRtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table of virtual routers.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { vrrpOper 1 }
|
|
|
|
vrrpOperVirtRtrEntry OBJECT-TYPE
|
|
SYNTAX VrrpOperVirtRtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the vrrpOperVirtRtrTable "
|
|
INDEX { vrrpOperVirtRtrIndex }
|
|
::= { vrrpOperVirtRtrTable 1 }
|
|
|
|
VrrpOperVirtRtrEntry ::= SEQUENCE {
|
|
vrrpOperVirtRtrIndex Integer32,
|
|
vrrpOperVirtRtrBackup INTEGER
|
|
}
|
|
|
|
vrrpOperVirtRtrIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index for the VRRP virtual router."
|
|
::= { vrrpOperVirtRtrEntry 1 }
|
|
|
|
vrrpOperVirtRtrBackup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
backup(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to a value of 'backup(2)' it forces the specified
|
|
master virtual router into backup mode.
|
|
'ok(1)' is returned when the object is read."
|
|
::= { vrrpOperVirtRtrEntry 2 }
|
|
|
|
vrrpOperVirtRtrGroupBackup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
backup(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to a value of 'backup(2)' it forces the specified
|
|
master virtual router group into backup mode.
|
|
'ok(1)' is returned when the object is read."
|
|
::= { vrrpOper 2 }
|
|
|
|
bgpOper OBJECT IDENTIFIER ::= { ipOper 1 }
|
|
garpOper OBJECT IDENTIFIER ::= { ipOper 2 }
|
|
|
|
bgpOperStart OBJECT IDENTIFIER ::= { bgpOper 1 }
|
|
bgpOperStop OBJECT IDENTIFIER ::= { bgpOper 2 }
|
|
|
|
bgpOperStartPeerNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter BGP peer Number.Value 1 is returned when object is read.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bgpOperStart 1 }
|
|
|
|
bgpOperStartSess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
start(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the action object,start(2) is to Start BGP peer session.
|
|
ok(1) is returned when object is read
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bgpOperStart 2 }
|
|
|
|
bgpOperStopPeerNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter BGP peer Number.Value 1 is returned when object is read.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { bgpOperStop 1 }
|
|
|
|
bgpOperStopSess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
stop(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an action object,stop(2) is to Stop BGP peer session.
|
|
ok(1) is returned when object is read
|
|
This mib is not supported for VX instance of virtualization"
|
|
::= { bgpOperStop 2 }
|
|
|
|
garpOperIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip Address to Send gratuitous arp.Value 0.0.0.0 is returned when object is read.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { garpOper 1 }
|
|
|
|
garpOperVlanNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4090)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan Number to Send gratuitous arp.Value 1 is returned when object is read.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { garpOper 2 }
|
|
|
|
garpOperSend OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
send(2),
|
|
error(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an action object,When set to value of send(2),
|
|
it sends gratuitous arp.ok(1) is returned when garp
|
|
request is sent successfully.Otherwise error(3) is returned.
|
|
Note:This mib is not supported for VX instance of virtualization"
|
|
::= { garpOper 3 }
|
|
|
|
haOperServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HaOperServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table of HA group.
|
|
This mib is not supported for VX instance of virtualization"
|
|
::= { haOper 1 }
|
|
|
|
haOperServiceEntry OBJECT-TYPE
|
|
SYNTAX HaOperServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the haOperServiceTable."
|
|
INDEX { haOperServiceIndex }
|
|
::= { haOperServiceTable 1 }
|
|
|
|
HaOperServiceEntry ::= SEQUENCE {
|
|
haOperServiceIndex DisplayString,
|
|
haOperServiceBackup INTEGER
|
|
}
|
|
|
|
haOperServiceIndex OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index for the ha service group in alphanumeric."
|
|
::= { haOperServiceEntry 1 }
|
|
|
|
haOperServiceBackup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
backup(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to a value of 'backup(2)' it forces the specified
|
|
HA service group master into backup mode.
|
|
'ok(1)' is returned when the object is read."
|
|
::= { haOperServiceEntry 2 }
|
|
|
|
haOperSwitchBackup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
backup(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to a value of 'backup(2)' it forces the specified
|
|
HA switch master into backup mode.
|
|
'ok(1)' is returned when the object is read."
|
|
::= { haOper 2 }
|
|
END
|
|
|