1706 lines
58 KiB
Plaintext
1706 lines
58 KiB
Plaintext
RAD-ds1Interface-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- It is RAD's intent to encourage the widespread use of
|
|
-- this Specification in connection with the management of
|
|
-- RAD products. RAD grants vendors, end-users,
|
|
-- and other interested parties a non-exclusive license to
|
|
-- use this Specification in connection with the management
|
|
-- of RAD products.
|
|
|
|
-- This Specification is supplied "as is," and RAD makes
|
|
-- no warranty, either express or implied, as to the use,
|
|
-- operation, condition, or performance of the Specification.
|
|
|
|
|
|
IMPORTS
|
|
|
|
dsx1LineStatus, dsx1CurrentIndex, dsx1LineIndex,
|
|
dsx1IntervalIndex, dsx1IntervalNumber, dsx1LoopbackStatus,
|
|
dsx1TotalIndex, dsx1IntervalLESs, dsx1IntervalPCVs,
|
|
dsx1IntervalESs, dsx1IntervalSESs, dsx1IntervalSEFSs,
|
|
dsx1IntervalCSSs, dsx1IntervalUASs FROM DS1-MIB
|
|
InterfaceIndex, ifAlias FROM IF-MIB
|
|
PerfCurrentCount, PerfIntervalCount, PerfTotalCount FROM PerfHist-TC-MIB
|
|
Integer32, Counter32, Gauge32,
|
|
Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE FROM SNMPv2-SMI
|
|
TruthValue FROM SNMPv2-TC
|
|
diverseIfWanGen FROM RAD-SMI-MIB
|
|
DayType FROM RAD-TC
|
|
alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason FROM RAD-GEN-MIB;
|
|
|
|
|
|
ds1Interface MODULE-IDENTITY
|
|
LAST-UPDATED "201604211804Z" -- April 21, 2016
|
|
ORGANIZATION "RAD Data Communications Ltd."
|
|
CONTACT-INFO
|
|
"System Department
|
|
|
|
Email: mibs@rad.com
|
|
Postal: RAD Data Communications Ltd.
|
|
24 Raoul Wallenberg St.
|
|
Tel-Aviv 6971920
|
|
Israel
|
|
|
|
Phone: +972-3-645-5421
|
|
Fax: +972-3-760-7844"
|
|
DESCRIPTION
|
|
"DS1 MIB."
|
|
::= { diverseIfWanGen 4 }
|
|
|
|
|
|
-- MIB is changed due to complilation problems:
|
|
-- As variable in the same name exists in DS1-MIB, dsx1LineMode is renamed to dsx1LineModeR.
|
|
|
|
prtDS1Events OBJECT IDENTIFIER ::= {ds1Interface 0}
|
|
|
|
prtDs1PerfHistory OBJECT IDENTIFIER ::= {ds1Interface 1}
|
|
|
|
|
|
|
|
|
|
-- Extension to the dsx1 current table
|
|
|
|
dsx1XCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1XCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of current statistics entries. This table
|
|
contains additional objects for the current table."
|
|
::= { prtDs1PerfHistory 2 }
|
|
|
|
dsx1XCurrentEntry OBJECT-TYPE
|
|
SYNTAX Dsx1XCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing additional statistical counters
|
|
applicable to a particular current table."
|
|
-- AUGMENTS { dsx1CurrentEntry }
|
|
INDEX { dsx1CurrentIndex }
|
|
::= { dsx1XCurrentTable 1 }
|
|
|
|
Dsx1XCurrentEntry ::= SEQUENCE {
|
|
dsx1CurrentLOS PerfCurrentCount,
|
|
dsx1CurrentLOF PerfCurrentCount,
|
|
dsx1CurrentLOC PerfCurrentCount,
|
|
dsx1CurrentAIS PerfCurrentCount,
|
|
dsx1CurrentRAI PerfCurrentCount,
|
|
dsx1CurrentLOMF PerfCurrentCount,
|
|
dsx1CurrentFEBE PerfCurrentCount,
|
|
dsx1CurrentStatus OCTET STRING,
|
|
dsx1CurrentBPV PerfCurrentCount,
|
|
dsx1CurrentLOCRCMF PerfCurrentCount,
|
|
dsx1CurrentLOFC PerfCurrentCount,
|
|
dsx1CurrentCRCErrors PerfCurrentCount,
|
|
dsx1CurrentLSES PerfCurrentCount,
|
|
dsx1CurrentFC PerfCurrentCount
|
|
}
|
|
|
|
dsx1CurrentLOS OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of LOS
|
|
seconds, encountered by a DS1 interface in
|
|
the current 15 minute interval."
|
|
::= { dsx1XCurrentEntry 1 }
|
|
|
|
dsx1CurrentLOF OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of LOF
|
|
seconds, encountered by a DS1
|
|
interface in the current 15 minute interval."
|
|
::= { dsx1XCurrentEntry 2 }
|
|
|
|
|
|
dsx1CurrentLOC OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
|
|
lost cells delineation ."
|
|
::= { dsx1XCurrentEntry 3 }
|
|
|
|
dsx1CurrentAIS OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of AIS
|
|
seconds, encountered by a DS1
|
|
interface in the current 15 minute interval."
|
|
::= { dsx1XCurrentEntry 4 }
|
|
|
|
dsx1CurrentRAI OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Alarm Indication: Transmitted in the outgoing direction
|
|
(toward the PABX) over FDL bits when the DS1 device detected
|
|
an incoming Loss Of Frame. Received from the far end (PABX)
|
|
over FDL when it detects a Loss of frame."
|
|
::= { dsx1XCurrentEntry 5 }
|
|
|
|
dsx1CurrentLOMF OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Multi-Frame sequence in E1 time slot 16."
|
|
::= { dsx1XCurrentEntry 6 }
|
|
|
|
dsx1CurrentFEBE OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far End Block Errors, as reported in the first bit
|
|
of frames 13 and 15, on multiframe E1 lines with CRC4,
|
|
in the current 15 minute interval."
|
|
::= { dsx1XCurrentEntry 7 }
|
|
|
|
dsx1CurrentStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statuses of the current interval:
|
|
0 - Valid.
|
|
1 - redundantLinkSwitch - the link has been switched
|
|
by a redundancy mechanism.
|
|
2 - discontinuity - module was partialy out.
|
|
4 - notValid - module is out."
|
|
::= { dsx1XCurrentEntry 8 }
|
|
|
|
dsx1CurrentBPV OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of BPVs (Bi-Polar Violations)
|
|
encountered by a DS1 interface in the current 15 minute interval."
|
|
::= { dsx1XCurrentEntry 9 }
|
|
|
|
dsx1CurrentLOCRCMF OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of CRC4 Multi-Frame sequence in E1.
|
|
encountered in the current 15 minute interval"
|
|
::= { dsx1XCurrentEntry 10 }
|
|
|
|
dsx1CurrentLOFC OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of loss of frame events measured.
|
|
encountered in the current 15 minute interval"
|
|
::= { dsx1XCurrentEntry 11 }
|
|
|
|
dsx1CurrentCRCErrors OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of CRC error events,
|
|
encountered in the current 15 minute interval."
|
|
::= { dsx1XCurrentEntry 12 }
|
|
|
|
dsx1CurrentLSES OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of LSES (Line Severely Errored Seconds)
|
|
encountered in the current 15 minute interval."
|
|
::= { dsx1XCurrentEntry 13 }
|
|
|
|
dsx1CurrentFC OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of FC (Path failure events) encountered
|
|
in the current 15 minute interval."
|
|
::= { dsx1XCurrentEntry 14 }
|
|
|
|
|
|
-- Interval table is deprecated, see dsx1IntervalNumTable
|
|
|
|
dsx1XIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1XIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A list of Interval entries. This table
|
|
contains additional objects for the interval table."
|
|
::= { prtDs1PerfHistory 3 }
|
|
|
|
dsx1XIntervalEntry OBJECT-TYPE
|
|
SYNTAX Dsx1XIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An entry containing additional statistical counters
|
|
applicable to a particular interval table."
|
|
-- AUGMENTS { dsx1IntervalEntry }
|
|
INDEX { dsx1IntervalIndex, dsx1IntervalNumber }
|
|
::= { dsx1XIntervalTable 1 }
|
|
|
|
Dsx1XIntervalEntry ::= SEQUENCE {
|
|
dsx1IntervalLOS PerfIntervalCount,
|
|
dsx1IntervalLOF PerfIntervalCount,
|
|
dsx1IntervalLOC PerfIntervalCount,
|
|
dsx1IntervalAIS PerfIntervalCount,
|
|
dsx1IntervalRAI PerfIntervalCount,
|
|
dsx1IntervalLOMF PerfIntervalCount,
|
|
dsx1IntervalFEBE PerfIntervalCount,
|
|
dsx1IntervalStatus OCTET STRING,
|
|
dsx1IntervalBPV PerfIntervalCount,
|
|
dsx1IntervalLOCRCMF PerfIntervalCount,
|
|
dsx1IntervalLOFC PerfIntervalCount,
|
|
dsx1IntervalLSES PerfIntervalCount,
|
|
dsx1IntervalFC PerfIntervalCount
|
|
}
|
|
|
|
dsx1IntervalLOS OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The counter associated with the number of LOS
|
|
seconds , encountered by a DS1 interface in
|
|
one of the previous 96, individual 15 minute,
|
|
intervals."
|
|
::= { dsx1XIntervalEntry 1 }
|
|
|
|
dsx1IntervalLOF OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The counter associated with the number of OOF
|
|
seconds, encountered by a DS1
|
|
interface in one of the previous 96, individual 15
|
|
minute, intervals."
|
|
::= { dsx1XIntervalEntry 2 }
|
|
|
|
dsx1IntervalLOC OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
|
|
lost cells delineation ."
|
|
::= { dsx1XIntervalEntry 3 }
|
|
|
|
dsx1IntervalAIS OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The counter associated with the number of AIS
|
|
seconds, encountered by a SONET
|
|
interface in one of the previous 96, individual 15
|
|
minute, intervals."
|
|
::= { dsx1XIntervalEntry 4 }
|
|
|
|
dsx1IntervalRAI OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Remote Alarm Indication: Transmitted in the outgoing direction
|
|
(toward the PABX) over FDL bits when the DS1 device detected
|
|
an incoming Loss Of Frame. Received from the far end (PABX)
|
|
over FDL when it detects a Loss of frame."
|
|
::= { dsx1XIntervalEntry 5 }
|
|
|
|
dsx1IntervalLOMF OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Multi-Frame sequence in E1 time slot 16."
|
|
::= { dsx1XIntervalEntry 6 }
|
|
|
|
dsx1IntervalFEBE OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far End Block Errors, as reported in the first bit
|
|
of frames 13 and 15, on multiframe E1 lines with CRC4,
|
|
in one of the previous 96, individual, 15 minute intervals."
|
|
::= { dsx1XIntervalEntry 7 }
|
|
|
|
dsx1IntervalStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statuses of the current interval:
|
|
0 - Valid.
|
|
1 - redundantLinkSwitch - the link has been switched
|
|
by a redundancy mechanism.
|
|
2 - discontinuity - module was partialy out.
|
|
4 - notValid - module is out."
|
|
::= { dsx1XIntervalEntry 8 }
|
|
|
|
dsx1IntervalBPV OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of BPV (Bi-Polar Violations)
|
|
encountered by a DS1 interface in one of the previous 96,
|
|
individual 15 minute, intervals."
|
|
::= { dsx1XIntervalEntry 9 }
|
|
|
|
dsx1IntervalLOCRCMF OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of CRC4 Multi-Frame sequence in E1."
|
|
::= { dsx1XIntervalEntry 10 }
|
|
|
|
dsx1IntervalLOFC OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of loss of frame events measured
|
|
in one of the previous 96, individual 15 minute, intervals."
|
|
::= { dsx1XIntervalEntry 11 }
|
|
|
|
dsx1IntervalLSES OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Counts the number of LSES (Line Severely Errored Seconds)
|
|
encountered in the 15 minute interval."
|
|
::= { dsx1XIntervalEntry 13 }
|
|
|
|
dsx1IntervalFC OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Counts the number of FC (Path failure events) encountered
|
|
in the 15 minute interval."
|
|
::= { dsx1XIntervalEntry 14 }
|
|
|
|
|
|
-- Extension to the dsx1 Total table
|
|
|
|
dsx1XTotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1XTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Total statistics entries. This table
|
|
contains additional objects for the Total table."
|
|
::= { prtDs1PerfHistory 4 }
|
|
|
|
dsx1XTotalEntry OBJECT-TYPE
|
|
SYNTAX Dsx1XTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing additional statistical counters
|
|
applicable to a particular total table."
|
|
-- AUGMENTS { dsx1TotalEntry }
|
|
INDEX { dsx1TotalIndex }
|
|
::= { dsx1XTotalTable 1 }
|
|
|
|
Dsx1XTotalEntry ::= SEQUENCE {
|
|
dsx1TotalLOS PerfTotalCount,
|
|
dsx1TotalLOF PerfTotalCount,
|
|
dsx1TotalAIS PerfTotalCount,
|
|
dsx1TotalRAI PerfTotalCount,
|
|
dsx1TotalBPV PerfTotalCount,
|
|
dsx1TotalLOFC PerfTotalCount,
|
|
dsx1TotalLSES PerfTotalCount,
|
|
dsx1TotalFC PerfTotalCount
|
|
}
|
|
|
|
dsx1TotalLOS OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of LOS (Loss of
|
|
Signal) seconds encountered by a DS1 interface in the
|
|
previous 24 hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1XTotalEntry 1 }
|
|
|
|
dsx1TotalLOF OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of LOF (Loss of
|
|
Frame) seconds encountered by a DS1 interface in the
|
|
previous 24 hour interval. Invalid 15 minute intervals count
|
|
as 0."
|
|
::= { dsx1XTotalEntry 2 }
|
|
|
|
dsx1TotalAIS OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of AIS (Alarm
|
|
Indication Signal) seconds encountered by a DS1 interface
|
|
in the previous 24 hour interval. Invalid 15 minute
|
|
intervals count as 0."
|
|
::= { dsx1XTotalEntry 4 }
|
|
|
|
dsx1TotalRAI OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of RAIS (Remote
|
|
Alarm Indication) seconds encountered by a DS1 interface
|
|
in the previous 24 hour interval. Invalid 15 minute
|
|
intervals count as 0."
|
|
::= { dsx1XTotalEntry 5 }
|
|
|
|
dsx1TotalBPV OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of BPV (Bi-Polar Violations)
|
|
encountered by a DS1 interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx1XTotalEntry 9 }
|
|
|
|
dsx1TotalLOFC OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number loss of frames
|
|
encountered by a DS1 interface in the previous 24 hour interval.
|
|
Invalid 15 minute intervals count as 0."
|
|
::= { dsx1XTotalEntry 11 }
|
|
|
|
dsx1TotalLSES OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of LSES (Line Severely Errored Seconds)
|
|
encountered by a DS1 interface in the previous 24 hour
|
|
interval. Invalid 15 minute intervals count as 0."
|
|
::= { dsx1XTotalEntry 13 }
|
|
|
|
dsx1TotalFC OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of FC (Path failure events) encountered
|
|
by a DS1 interface in the previous 24 hour interval. Invalid
|
|
15 minute intervals count as 0."
|
|
::= { dsx1XTotalEntry 14 }
|
|
|
|
-- DS1 Data Stream Statistics Table
|
|
|
|
dsx1DataStreamStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1DataStreamStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 Data Stream Statistics table."
|
|
::= { prtDs1PerfHistory 5 }
|
|
|
|
dsx1DataStreamStatEntry OBJECT-TYPE
|
|
SYNTAX Dsx1DataStreamStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the DS1 Data Stream Statistics table."
|
|
INDEX { dsx1DataStreamStatIfIndex, dsx1DataStreamStatIndex }
|
|
::= { dsx1DataStreamStatTable 1 }
|
|
|
|
Dsx1DataStreamStatEntry ::=
|
|
SEQUENCE {
|
|
dsx1DataStreamStatIfIndex Integer32,
|
|
dsx1DataStreamStatIndex Integer32,
|
|
dsx1DataStreamStatValid TruthValue,
|
|
dsx1DataStreamStatInFrames Counter32,
|
|
dsx1DataStreamStatInBytes Counter32,
|
|
dsx1DataStreamStatInDiscards Counter32,
|
|
dsx1DataStreamStatInErrors Counter32,
|
|
dsx1DataStreamStatOutFrames Counter32,
|
|
dsx1DataStreamStatOutBytes Counter32,
|
|
dsx1DataStreamStatOutDiscards Counter32,
|
|
dsx1DataStreamStatOutErrors Counter32
|
|
}
|
|
|
|
dsx1DataStreamStatIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the DS1 interface.
|
|
It may be ifIndex."
|
|
::= { dsx1DataStreamStatEntry 1 }
|
|
|
|
dsx1DataStreamStatIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS1 Data Stream Index.
|
|
For Vmux - the following indices are used:
|
|
1 for Transparent
|
|
2-3 for SS71-SS72 (respectively)
|
|
4-7 for Data1-Data4 (respectively)
|
|
8 for HDLC Ph2 Compatible
|
|
9-16 for Sub-CH1-1...Sub-CH1-8 (respectively)."
|
|
::= { dsx1DataStreamStatEntry 2 }
|
|
|
|
dsx1DataStreamStatValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether this Data Stream is valid or not.
|
|
When invalid - all counters are irrelevant."
|
|
::= { dsx1DataStreamStatEntry 3 }
|
|
|
|
dsx1DataStreamStatInFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of received frames,
|
|
encountered by the DS1 Data Stream."
|
|
::= { dsx1DataStreamStatEntry 4 }
|
|
|
|
dsx1DataStreamStatInBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of received bytes,
|
|
encountered by the DS1 Data Stream."
|
|
::= { dsx1DataStreamStatEntry 5 }
|
|
|
|
dsx1DataStreamStatInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Discarded incoming frames,
|
|
encountered by the DS1 Data Stream."
|
|
::= { dsx1DataStreamStatEntry 6 }
|
|
|
|
dsx1DataStreamStatInErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of received Errored frames,
|
|
encountered by the DS1 Data Stream."
|
|
::= { dsx1DataStreamStatEntry 7 }
|
|
|
|
dsx1DataStreamStatOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of transmitted frames,
|
|
encountered by the DS1 Data Stream."
|
|
::= { dsx1DataStreamStatEntry 8 }
|
|
|
|
dsx1DataStreamStatOutBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of transmitted bytes,
|
|
encountered by the DS1 Data Stream."
|
|
::= { dsx1DataStreamStatEntry 9 }
|
|
|
|
dsx1DataStreamStatOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Discarded outgoing frames,
|
|
encountered by the DS1 Data Stream."
|
|
::= { dsx1DataStreamStatEntry 10 }
|
|
|
|
dsx1DataStreamStatOutErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of errored transmitted frames,
|
|
encountered by the DS1 Data Stream."
|
|
::= { dsx1DataStreamStatEntry 11 }
|
|
|
|
|
|
-- Extension to the DS1 Configuration Table
|
|
|
|
dsx1XConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1XConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An extension to the DS1 Configuration table."
|
|
::= { ds1Interface 2 }
|
|
|
|
dsx1XConfigEntry OBJECT-TYPE
|
|
SYNTAX Dsx1XConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing additional configuration
|
|
parameters."
|
|
-- AUGMENTS { dsx1ConfigTable }
|
|
INDEX { dsx1LineIndex }
|
|
::= { dsx1XConfigTable 1 }
|
|
|
|
Dsx1XConfigEntry ::= SEQUENCE {
|
|
dsx1IdleCode Integer32,
|
|
dsx1LineMode INTEGER,
|
|
dsx1dBTxGain INTEGER,
|
|
dsx1RxSensitivity INTEGER,
|
|
dsx1RestoreTime INTEGER,
|
|
dsx1TcFirstSignal Integer32,
|
|
dsx1TcSignal Integer32,
|
|
dsx1TcPattern Integer32,
|
|
dsx1Scramble INTEGER,
|
|
dsx1LineAdaptiveTimingMode INTEGER,
|
|
dsx1TxClockSource INTEGER,
|
|
dsx1AisEnable INTEGER,
|
|
dsx1TsEchoCancel OCTET STRING,
|
|
dsx1EchoCancelerModule INTEGER,
|
|
dsx1PortFunction INTEGER,
|
|
dsx1PortMultiplier INTEGER,
|
|
dsx1LeasedLine INTEGER,
|
|
dsx1CsuLoop INTEGER,
|
|
dsx1ClockSource Integer32,
|
|
dsx1OosSignal INTEGER,
|
|
dsx1BundleNextIndex Integer32,
|
|
dsx1CRC6CalcMode INTEGER,
|
|
dsx1SendUponFail INTEGER,
|
|
dsx1InbandLoopSignal INTEGER,
|
|
dsx1InbandLoopUpCode OCTET STRING,
|
|
dsx1InbandLoopUpLength Unsigned32,
|
|
dsx1InbandLoopDownCode OCTET STRING,
|
|
dsx1InbandLoopDownLength Unsigned32,
|
|
dsx1TxClockInstance Unsigned32,
|
|
dsx1TxPortQuality INTEGER
|
|
}
|
|
|
|
dsx1IdleCode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Byte pattern of the data received/transmitted in the
|
|
E1T1 framer idle timeslots.
|
|
Valid range: (0 - FF HEX)."
|
|
::= { dsx1XConfigEntry 1 }
|
|
|
|
dsx1LineMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
csu(1),
|
|
dsu(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"T1 device operation mode.
|
|
Valid for T1 only."
|
|
::= { dsx1XConfigEntry 2 }
|
|
|
|
dsx1dBTxGain OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
neg75dB (2),
|
|
neg15dB (3),
|
|
neg225dB (4),
|
|
zerodB (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit line Gain for T1 CSU line mode."
|
|
::= { dsx1XConfigEntry 3 }
|
|
|
|
dsx1RxSensitivity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
longHaul (2),
|
|
shortHaul (3),
|
|
monitor (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Sensitivity is considered Short Haul while High Sensitivity
|
|
is considered Long Haul. The actual values depend on the LIU.
|
|
Examples:
|
|
- E1: -12dB is considered Short Haul ; -43dB is considered Long Haul
|
|
- T1: -12dB is considered Short Haul ; -36dB is considered Long Haul.
|
|
- monitor value applicable for M8E1/T1 ports"
|
|
::= { dsx1XConfigEntry 4 }
|
|
|
|
dsx1RestoreTime OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
sec1(2),
|
|
sec10(3),
|
|
immediate(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to change the sync. algorithms to reduce the time
|
|
required for the port to return to normal operation after
|
|
a RED alarm.
|
|
'sec1' = Fast,
|
|
'sec10' = TR-6211,
|
|
'immediate' = CCITT"
|
|
::= { dsx1XConfigEntry 5 }
|
|
|
|
dsx1TcFirstSignal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunk conditioning signal - value to be sent as a signal
|
|
during the first 2.5 seconds after alarm detection.
|
|
Range is 0x0..0xF. 0xFF is a NULL value.
|
|
This variable is used also for Space Signaling Code (in this case
|
|
0xFF is not NULL)."
|
|
::= { dsx1XConfigEntry 6 }
|
|
|
|
dsx1TcSignal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunk conditioning signal value after alarm detection.
|
|
Range is 0x1..0xF for E1, and 0x0..0xF for T1.
|
|
This variable is used also for Space Signaling Code (E1 and T1)."
|
|
::= { dsx1XConfigEntry 7 }
|
|
|
|
dsx1TcPattern OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunk conditioning data pattern to be sent upon a DS0 fail.
|
|
Range is 0x0..0xFF.
|
|
This variable used also for Out of Service Code."
|
|
::= { dsx1XConfigEntry 8 }
|
|
|
|
dsx1Scramble OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
notActive (2),
|
|
active (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scrambling is an operation that randomizes the bits
|
|
of the payload of the ATM cell by a polynom.
|
|
This operation helps with the error detection mechanism
|
|
of the HEC. Not applicable for E1.
|
|
active - will scramble/descramble the payload ATM cell
|
|
notActive - will not scramble/descramble. "
|
|
::= { dsx1XConfigEntry 9 }
|
|
|
|
dsx1LineAdaptiveTimingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables end to end clock synchronization.
|
|
Default value - off."
|
|
::= { dsx1XConfigEntry 10 }
|
|
|
|
dsx1TxClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
loopTiming(1),
|
|
localTiming(2),
|
|
throughTiming(3),
|
|
adaptive(4),
|
|
system(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source of Transmit Clock.
|
|
'loopTiming' indicates that the recovered receive clock
|
|
is used as the transmit clock.
|
|
|
|
'localTiming' indicates that a local clock
|
|
source is used or when an external clock is
|
|
attached to the box containing the interface.
|
|
|
|
'throughTiming' indicates that recovered receive clock
|
|
from another interface is used as the transmit clock.
|
|
|
|
'adaptive' indicates that the clock is recovered according
|
|
to the received data flow rate.
|
|
|
|
'system' indicates that the system clock
|
|
is used as the transmit clock."
|
|
::= { dsx1XConfigEntry 11 }
|
|
|
|
dsx1AisEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected)."
|
|
::= { dsx1XConfigEntry 12 }
|
|
|
|
dsx1TsEchoCancel OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines for each TS whether Echo-Cancellation is on.
|
|
Each bit represents one TS as follow:
|
|
First octet bit'0' = TS#1, bit'7' = TS#8, .. 2nd octet bit'0' = TS#9,..,
|
|
4th octet bit'7' = TS#32.
|
|
Octets and bits order is from left to right:
|
|
[31,30,..24] [23..16] [15..8] [7..0]
|
|
MSB LSB MSB LSB MSB LSB MSB LSB
|
|
|
|
For each bit values are:
|
|
0 - Echo-Cancellation off.
|
|
1 - Echo-Cancellation on."
|
|
::= { dsx1XConfigEntry 13 }
|
|
|
|
dsx1EchoCancelerModule OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notExist(2),
|
|
exist(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter indicates whether echo-cancellation module
|
|
exists for this line."
|
|
::= { dsx1XConfigEntry 14 }
|
|
|
|
dsx1PortFunction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
uni (2),
|
|
ces (3),
|
|
ima (4),
|
|
cesPsn (5),
|
|
abis (6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines the ATM Mode over the
|
|
physical port.
|
|
uni - The port will function as an ATM UNI.
|
|
ces - The port will function as a CES.
|
|
ima - The port will function as an IMA-ATM.
|
|
cesPsn - The port will function as a CES-PSN.
|
|
abis - The port will function as an Abis."
|
|
::= { dsx1XConfigEntry 15 }
|
|
|
|
dsx1PortMultiplier OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
r56 (2),
|
|
r64 (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines the data rate of each TS
|
|
(Kbps units).
|
|
This parameter is applicable for T1 only."
|
|
::= { dsx1XConfigEntry 16 }
|
|
|
|
dsx1LeasedLine OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
disable (2),
|
|
enable (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines whether Line mode is regular (non Leased Line mode)
|
|
or transparent (Leased Line mode)."
|
|
::= { dsx1XConfigEntry 17 }
|
|
|
|
dsx1CsuLoop OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
local (2),
|
|
transparent (3),
|
|
remote (4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines where the CSU loop will be done:
|
|
local - locally (by IPmux) towards the TDM device
|
|
transparent - transferred to Remote Device that will send it to its
|
|
connected TDM device.
|
|
remote - Remote Device will close the loop towards the Local Device."
|
|
::= { dsx1XConfigEntry 18 }
|
|
|
|
dsx1ClockSource OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry specifies the source from which the clock will be taken.
|
|
Refer to device specification for source Index"
|
|
::= { dsx1XConfigEntry 19 }
|
|
|
|
dsx1OosSignal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
space (2),
|
|
mark (3),
|
|
spaceMark (4),
|
|
markSpace (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This parameter defines the value to be sent as a signal
|
|
after alarm detection:
|
|
'Space' = both A and B signaling bits are forced
|
|
to '0' during out-of-service periods.
|
|
'Mark' = both A and B signaling bits are forced
|
|
to '1' during out-of-service periods.
|
|
'spaceMark' = A and B bits are forced to '0' for
|
|
2.5 seconds; then they are switched to '1'
|
|
until out-of-service condition disappears.
|
|
'markSpace' = A and B bits are forced to '1' for
|
|
2.5 seconds; then they are switched to '0'
|
|
until out-of-service condition disappears.
|
|
- '0'= 0 for T1, 1 for E1, or user defined value for Space
|
|
- '1'= 1 for T1, 0 for E1, or user defined value for Mark."
|
|
::= { dsx1XConfigEntry 20 }
|
|
|
|
dsx1BundleNextIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter indicates the Next free Bundle Index for this DS1 port."
|
|
::= { dsx1XConfigEntry 21 }
|
|
|
|
dsx1CRC6CalcMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
jtG704 (1),
|
|
ituG704(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines the CRC6 Calculation mode.
|
|
jtG704 =JT-G704 = the Japanese standard
|
|
ituG704=ITU-G704 = the International standard
|
|
This parameter is applicable for J1 only."
|
|
::= { dsx1XConfigEntry 22 }
|
|
|
|
dsx1SendUponFail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
oosCode (2),
|
|
ais (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines which notification will be sent to the other side
|
|
upon fail of another interface.
|
|
In Ipmux14 the notification is sent upon failure of the Ethernet link."
|
|
::= { dsx1XConfigEntry 23 }
|
|
|
|
dsx1InbandLoopSignal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
csu (2),
|
|
fdlLine (3),
|
|
fdlNetwork (4),
|
|
niuFac1 (5),
|
|
niuFac2 (6),
|
|
program (99)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the signal pattern for inband loopback
|
|
activation and deactivation:
|
|
|
|
csu
|
|
Applicable only for SF (D4) and ESF line types
|
|
Defined in AT&T TR54016 and ANSI T1.403.
|
|
Loop-up pattern - 00001 detected for at least 5 seconds
|
|
Loop-down pattern - 001 detected for at least 5 seconds
|
|
|
|
fdlLine
|
|
Applicable only for ESF line type.
|
|
Defined in ANSI T1.403.
|
|
Loop-up pattern - 00001110 11111111
|
|
Loop-down pattern - 00111000 11111111 or 00100100 11111111 (universal deactivate)
|
|
|
|
fdlNetwork
|
|
Applicable only for ESF line type.
|
|
Defined in ANSI T1.403.
|
|
Loop-up pattern - 00010010 11111111
|
|
Loop-down pattern - 00100100 11111111
|
|
|
|
niuFac1
|
|
Applicable for framed and unframed line types.
|
|
Define in Telcordia (Bellcore) TR-TSY-0312.
|
|
Loop-up pattern - 0011
|
|
Loop-down pattern - 0111
|
|
|
|
niuFac2
|
|
Applicable for framed and unframed line types.
|
|
Define in Telcordia (Bellcore) TR-TSY-0312.
|
|
Loop-up pattern - 00011
|
|
Loop-down pattern - 00111
|
|
|
|
program
|
|
User configurable loop-up and loop-down patterns.
|
|
The patterns and their length are set in:
|
|
dsx1InbandLoopUpCode
|
|
dsx1InbandLoopUpLength
|
|
dsx1InbandLoopDownCode
|
|
dsx1InbandLoopDownLength
|
|
|
|
The specified pattern is applicable only when the value of
|
|
dsx1CsuLoop is local(2) or remote(4).
|
|
|
|
This parameter is applicable only for T1."
|
|
::= { dsx1XConfigEntry 24 }
|
|
|
|
dsx1InbandLoopUpCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the inband signal pattern that shall
|
|
cause activation of a loopback.
|
|
|
|
The specified pattern is applicable only when the value of
|
|
dsx1CsuLoop is local(2) or remote(4), and the value of
|
|
dsx1InbandLoopSignal is program(99)."
|
|
::= { dsx1XConfigEntry 25 }
|
|
|
|
dsx1InbandLoopUpLength OBJECT-TYPE
|
|
SYNTAX Unsigned32 (3..8)
|
|
UNITS "bits"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the length, in bits, of the inband
|
|
signal pattern that shall cause activation of a loopback.
|
|
|
|
The specified pattern is applicable only when the value of
|
|
dsx1CsuLoop is local(2) or remote(4), and the value of
|
|
dsx1InbandLoopSignal is program(99)."
|
|
::= { dsx1XConfigEntry 26 }
|
|
|
|
dsx1InbandLoopDownCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the inband signal pattern that shall
|
|
cause de-activation of a loopback.
|
|
|
|
The specified pattern is applicable only when the value of
|
|
dsx1CsuLoop is local(2) or remote(4), and the value of
|
|
dsx1InbandLoopSignal is program(99)."
|
|
::= { dsx1XConfigEntry 27 }
|
|
|
|
dsx1InbandLoopDownLength OBJECT-TYPE
|
|
SYNTAX Unsigned32 (3..8)
|
|
UNITS "bits"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the length, in bits, of the inband
|
|
signal pattern that shall cause de-activation of a loopback.
|
|
|
|
The specified pattern is applicable only when the value of
|
|
dsx1CsuLoop is local(2) or remote(4), and the value of
|
|
dsx1InbandLoopSignal is program(99)."
|
|
::= { dsx1XConfigEntry 28 }
|
|
|
|
dsx1TxClockInstance OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When dsx1TransmitClockSource is set to throughTiming(3) or
|
|
adaptive(4), this parameter specifies the instance of the
|
|
clock domain or recovered clock, respectively, that shall
|
|
be used for transmission."
|
|
::= { dsx1XConfigEntry 29 }
|
|
|
|
dsx1TxPortQuality OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (1),
|
|
stratum1 (2),
|
|
stratum2 (3),
|
|
stratum3 (4),
|
|
stratum3e (5),
|
|
stratum4 (6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port clock quality."
|
|
::= { dsx1XConfigEntry 30 }
|
|
|
|
|
|
|
|
--***************************
|
|
-- DS1 Statistics Thresholds
|
|
--***************************
|
|
|
|
dsx1XStatThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dsx1XStatThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An extension to the DS1 Configuration table that defines
|
|
DS1 statistics thresholds.
|
|
'Line' means a physical transport of digital information at
|
|
nominal rate of 2.048Mbps or 1.544Mbps.
|
|
'Path' means a framed digital signal at nominal rate of
|
|
2.048Mbps or 1.544Mbps independent of the specific
|
|
transmission equipment."
|
|
::= { ds1Interface 3 }
|
|
|
|
dsx1XStatThresholdEntry OBJECT-TYPE
|
|
SYNTAX Dsx1XStatThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing statistics thresholds for DS1 port."
|
|
INDEX { dsx1LineIndex }
|
|
::= { dsx1XStatThresholdTable 1 }
|
|
|
|
Dsx1XStatThresholdEntry ::= SEQUENCE {
|
|
dsx1LineIntervalLesThreshold Unsigned32,
|
|
dsx1PathIntervalCvThreshold Unsigned32,
|
|
dsx1PathIntervalEsThreshold Unsigned32,
|
|
dsx1PathIntervalSesThreshold Unsigned32,
|
|
dsx1PathIntervalSefsThreshold Unsigned32,
|
|
dsx1PathIntervalCssThreshold Unsigned32,
|
|
dsx1PathIntervalUasThreshold Unsigned32
|
|
}
|
|
|
|
dsx1LineIntervalLesThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..900)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
Error Seconds (ES) within any given 15-minute performance
|
|
Line data collection interval. If the value of Error Seconds
|
|
in a particular 15-minute collection interval exceeded
|
|
this value, a related Trap/Notification MAY be generated
|
|
at the end of the interval. At most, one notification will
|
|
be sent per interval per port."
|
|
::= { dsx1XStatThresholdEntry 1 }
|
|
|
|
dsx1PathIntervalCvThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..16383)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
Code Violations (CV) within any given 15-minute performance
|
|
Path data collection interval. If the value of Error Seconds
|
|
in a particular 15-minute collection interval exceeded
|
|
this value, a related Trap/Notification MAY be generated
|
|
at the end of the interval. At most, one notification will
|
|
be sent per interval per port."
|
|
::= { dsx1XStatThresholdEntry 2 }
|
|
|
|
dsx1PathIntervalEsThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..900)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
Error Seconds (ES) within any given 15-minute performance
|
|
Path data collection interval. If the value of Error Seconds
|
|
in a particular 15-minute collection interval exceeded
|
|
this value, a related Trap/Notification MAY be generated
|
|
at the end of the interval. At most, one notification will
|
|
be sent per interval per port."
|
|
::= { dsx1XStatThresholdEntry 3 }
|
|
|
|
dsx1PathIntervalSesThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..900)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
Severe Error Seconds (SES) within any given 15-minute
|
|
performance Path data collection interval. If the value of
|
|
Error Seconds in a particular 15-minute collection interval
|
|
exceeded this value, a related Trap/Notification MAY be
|
|
generated at the end of the interval. At most, one
|
|
notification will be sent per interval per port."
|
|
::= { dsx1XStatThresholdEntry 4 }
|
|
|
|
dsx1PathIntervalSefsThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..900)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
Severely Errored Framing Seconds (SEFS) within any given
|
|
15-minute performance Path data collection interval. If the
|
|
value of Error Seconds in a particular 15-minute collection
|
|
interval exceeded this value, a related Trap/Notification
|
|
MAY be generated at the end of the interval. At most, one
|
|
notification will be sent per interval per port."
|
|
::= { dsx1XStatThresholdEntry 5 }
|
|
|
|
dsx1PathIntervalCssThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..900)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
Controlled Slip Seconds (CSS) within any given 15-minute
|
|
performance Path data collection interval. If the value of
|
|
Error Seconds in a particular 15-minute collection interval
|
|
exceeded this value, a related Trap/Notification MAY be
|
|
generated at the end of the interval. At most, one
|
|
notification will be sent per interval per port."
|
|
::= { dsx1XStatThresholdEntry 6 }
|
|
|
|
dsx1PathIntervalUasThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..900)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
Unavailable Seconds (UAS) within any given 15-minute
|
|
performance Path data collection interval. If the value of
|
|
Error Seconds in a particular 15-minute collection interval
|
|
exceeded this value, a related Trap/Notification MAY be
|
|
generated at the end of the interval. At most, one
|
|
notification will be sent per interval per port."
|
|
::= { dsx1XStatThresholdEntry 7 }
|
|
|
|
-- ALARM INDICATION SIGNAL (AIS)
|
|
|
|
-- USER E1 LOCAL MULTIFRAME ALARM
|
|
ds1LocalMultiframeAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates near end (Local) Loss of
|
|
Multiframe Alignment, of the user E1 interface."
|
|
::= { prtDS1Events 1 }
|
|
|
|
-- USER E1 REMOTE MULTIFRAME ALARM
|
|
ds1RemoteMultiframeAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the far end (remote) unit,
|
|
connected to the user E1 interface, reports
|
|
Loss of Multiframe Alignment."
|
|
::= { prtDS1Events 2 }
|
|
|
|
-- USER DS1 LINK FRAME SLIP
|
|
ds1LinkFrameSlipTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a Frame Slip occurred at the user
|
|
DS1 interface. This usually indicates timing problems
|
|
(incorrect selection of timing reference),
|
|
on the user DS1 link."
|
|
::= { prtDS1Events 3 }
|
|
|
|
-- USER DS1 BPV ERROR
|
|
ds1BpvErrorTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates a Bipolar Violation (BPV)
|
|
error has been detected at the user DS1 interface."
|
|
::= { prtDS1Events 4 }
|
|
|
|
-- USER DS1 EXCESSIVE BPV
|
|
ds1ExcessiveBpvTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates excessive number of
|
|
Bipolar Violation errors (BPV)
|
|
detected by the user DS1 interface"
|
|
::= { prtDS1Events 5 }
|
|
|
|
-- USER DS1 CRC-4 ERROR
|
|
ds1Crc4ErrorTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a frame with CRC-4 error has been
|
|
detected at the user DS1 interface."
|
|
::= { prtDS1Events 6 }
|
|
|
|
-- USER DS1 EXCESSIVE ERROR RATIO
|
|
ds1ExcessiveErrorRatioTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the error rate, detected
|
|
at the user DS1 interface, on the frame synchronization bits
|
|
is high, as defined by ITU-T Rec. G.732."
|
|
::= { prtDS1Events 7 }
|
|
|
|
-- USER DS1 REMOTE SYNC LOSS
|
|
ds1RemoteSyncLossTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the far-end (remote)
|
|
unit, connected to user DS1 interface,
|
|
reports Loss of Frame Alignment (Sync Loss)."
|
|
::= { prtDS1Events 8 }
|
|
|
|
-- USER DS1 LOCAL SYNC LOSS
|
|
ds1LocalSyncLossTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates near end (Local)
|
|
Loss of Frame Alignment failure (Sync Loss),
|
|
of the user DS1 interface"
|
|
::= { prtDS1Events 9 }
|
|
|
|
-- USER DS1 AIS SYNC LOSS
|
|
ds1AisSyncLossTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates near end (Local)
|
|
Loss of Frame Alignment (Sync Loss), caused by the reception
|
|
of AIS at the user DS1 interface."
|
|
::= { prtDS1Events 10 }
|
|
|
|
-- USER DS1 AIS
|
|
ds1AisTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates AIS being received
|
|
at the user DS1 interface."
|
|
::= { prtDS1Events 11 }
|
|
|
|
-- NETWORK REMOTE LOOP
|
|
ds1NetworkRemoteLoopTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a remote loopback
|
|
has been activated, on the local uplink interface."
|
|
::= { prtDS1Events 12 }
|
|
|
|
-- USER SIDE REMOTE LOOP
|
|
ds1RemoteLoopTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a remote loopback
|
|
has been activated, on the local user port."
|
|
::= { prtDS1Events 13 }
|
|
|
|
-- USER SIDE LOCAL LOOP
|
|
ds1LocalLoopTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a local loopback
|
|
has been activated on the user port."
|
|
::= { prtDS1Events 14 }
|
|
|
|
-- DS1 EXCESSIVE FRAME SLIP
|
|
ds1ExcessiveFrameSlipTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the number of Frame Slips
|
|
detected at the user DS1 interface, during the last minute
|
|
exceeds threshold. For LA-110, threshold value is 10.
|
|
This usually indicates timing problems
|
|
(incorrect selection of timing reference) on the user DS1."
|
|
::= { prtDS1Events 15 }
|
|
|
|
-- USER DS1 EXCESSIVE CRC 4 ERROR
|
|
ds1ExcessiveCrc4ErrorTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the error rate
|
|
detected on the CRC-4 bits at the
|
|
user DS1 interface, is high."
|
|
::= { prtDS1Events 16 }
|
|
|
|
-- USER E1 EXCESSIVE LOCAL MULTIFRAME ALARM
|
|
ds1ExcessiveLocalMfAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the number of local
|
|
Loss of Multiframe Alignment events, detected at
|
|
the user E1 interface during the last minute exceeds threshold.
|
|
For LA-110, threshold value is 10."
|
|
::= { prtDS1Events 17 }
|
|
|
|
-- USER E1 EXCESSIVE REMOTE MULTIFRAME ALARM
|
|
ds1ExcessiveRemoteMfAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the number of
|
|
Loss of multiframe alignment events reported
|
|
by the remote unit connected to the user
|
|
E1 interface during the last minute exceeds threshold.
|
|
For LA-110, threshold value is 10."
|
|
::= { prtDS1Events 18 }
|
|
|
|
-- USER DS1 EXCESSIVE REMOTE SYNC LOSS
|
|
ds1ExcessiveRemoteSyncLossTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the number of far end
|
|
(remote) Loss of Synchronization alarms,
|
|
reported by the user DS1 interface
|
|
during the last minute, exceeds threshold.
|
|
For LA-110, threshold value is 10."
|
|
::= { prtDS1Events 19 }
|
|
|
|
-- USER DS1 EXCESSIVE LOCAL SYNC LOSS
|
|
ds1ExcessiveLocalSyncLossTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the number of
|
|
Loss of local Synchronization alarms
|
|
reported by the user DS1 interface
|
|
during the last minute, exceeds threshold.
|
|
For LA-110, threshold value is 10."
|
|
::= { prtDS1Events 20 }
|
|
|
|
-- USER DS1 SIGNAL LOSS
|
|
ds1SignalLossTrap NOTIFICATION-TYPE
|
|
OBJECTS {alarmSeverity, alarmState, ifAlias}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates Signal Loss.
|
|
(possible reason - cable disconnection. etc.)"
|
|
::= { prtDS1Events 21 }
|
|
|
|
e1t1Ais NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1LineStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that an Alarm Indication Signal (AIS) was detected
|
|
on an E1/T1 interface.
|
|
"
|
|
::= { prtDS1Events 25 }
|
|
|
|
-- LOSS OF FRAME (LOF)
|
|
e1t1Lof NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1LineStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a Loss of Frame (LOF) was detected on an E1/T1 interface.
|
|
"
|
|
::= { prtDS1Events 26 }
|
|
|
|
-- REMOTE ALARM INDICATION (RAI)
|
|
e1t1Rai NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1LineStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap shows that a Remote Alarm Indication (RAI) was detected by an E1/T1 interface.
|
|
"
|
|
::= { prtDS1Events 27 }
|
|
|
|
-- LOSS OF MULTIFRAME (LOMF)
|
|
e1t1Lomf NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1LineStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a Loss of Multi-Frame was detected on an E1 interface.
|
|
"
|
|
::= { prtDS1Events 28 }
|
|
|
|
|
|
|
|
-- LOSS OF SIGNAL (LOS)
|
|
e1t1Los NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1LineStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a Loss of signal was detected on an E1/T1 interface.
|
|
"
|
|
::= { prtDS1Events 30 }
|
|
|
|
-- LOOPBACK
|
|
e1t1Loopback NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1LoopbackStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a Local or Remote Loopback has been activated on a T1/J1 interface.
|
|
"
|
|
::= { prtDS1Events 36 }
|
|
|
|
-- LOOPBACK OFF
|
|
e1t1LoopbackOff NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that a Local or Remote Loopback has ended on a T1/J1 interface.
|
|
"
|
|
::= { prtDS1Events 37 }
|
|
|
|
-- ES LINE TCA
|
|
e1t1EsLineTca NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1IntervalLESs, dsx1LineIntervalLesThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates DS1 Line Errored Seconds (ES) threshold
|
|
crossing alert"
|
|
::= { prtDS1Events 38 }
|
|
|
|
-- CV PATH TCA
|
|
e1t1CvPathTca NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1IntervalPCVs, dsx1PathIntervalCvThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates DS1 Path Coding Violations (CV)
|
|
threshold crossing alert"
|
|
::= { prtDS1Events 39 }
|
|
|
|
-- ES PATH TCA
|
|
e1t1EsPathTca NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1IntervalESs, dsx1PathIntervalEsThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates DS1 Path Errored Seconds (ES) threshold
|
|
crossing alert"
|
|
::= { prtDS1Events 40 }
|
|
|
|
-- SES PATH TCA
|
|
e1t1SesPathTca NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1IntervalSESs, dsx1PathIntervalSesThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates DS1 Path Severely Errored Seconds (SES)
|
|
threshold crossing alert"
|
|
::= { prtDS1Events 41 }
|
|
|
|
-- SEFS PATH TCA
|
|
e1t1SefsPathTca NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1IntervalSEFSs, dsx1PathIntervalSefsThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates DS1 Path Severely Errored Framing
|
|
Seconds (SEFS) threshold crossing alert"
|
|
::= { prtDS1Events 42 }
|
|
|
|
-- CSS PATH TCA
|
|
e1t1CssPathTca NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1IntervalCSSs, dsx1PathIntervalCssThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates DS1 Path Controlled Slip Seconds (CSS)
|
|
threshold crossing alert"
|
|
::= { prtDS1Events 43 }
|
|
|
|
-- UAS PATH TCA
|
|
e1t1UasPathTca NOTIFICATION-TYPE
|
|
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
|
|
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
|
|
ifAlias, dsx1IntervalUASs, dsx1PathIntervalUasThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates DS1 Path Unavailable Seconds (UAS)
|
|
threshold crossing alert"
|
|
::= { prtDS1Events 44 }
|
|
|
|
END
|