WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/rad/RAD-EthIf-MIB

4118 lines
130 KiB
Plaintext
Raw Blame History

RAD-EthIf-MIB DEFINITIONS ::= BEGIN
-- It is RAD's intent to encourage the widespread use of
-- this Specification in connection with the management of
-- RAD products. RAD grants vendors, end-users,
-- and other interested parties a non-exclusive license to
-- use this Specification in connection with the management
-- of RAD products.
-- This Specification is supplied "as is," and RAD makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
IMPORTS
dot3OamEntry, dot3OamOperStatus, dot3OamLoopbackStatus,
dot3OamLoopbackIgnoreRx FROM DOT3-OAM-MIB
ifAlias, ifIndex, ifDescr,
InterfaceIndexOrZero FROM IF-MIB
PortList FROM Q-BRIDGE-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
Integer32, Counter32, Gauge32,
Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-IDENTITY, Counter64 FROM SNMPv2-SMI
RowStatus, TruthValue, MacAddress,
RowPointer FROM SNMPv2-TC
diverseIfWanGen FROM RAD-SMI-MIB
alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
prtTestCmdAndStatus FROM RAD-GEN-MIB;
ethIf MODULE-IDENTITY
LAST-UPDATED "201609281522Z" -- September 28, 2016
ORGANIZATION "RAD Data Communications Ltd."
CONTACT-INFO
"System Department
Email: mibs@rad.com
Postal: RAD Data Communications Ltd.
24 Raoul Wallenberg St.
Tel-Aviv 6971920
Israel
Phone: +972-3-645-5421
Fax: +972-3-760-7844"
DESCRIPTION
"Ethernet Interface MIB."
::= { diverseIfWanGen 1 }
--Ethernet Interface
ethIfEvents OBJECT IDENTIFIER ::= {ethIf 0} -- Notifications
ethIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table."
::= { ethIf 1}
ethIfEntry OBJECT-TYPE
SYNTAX EthIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in table."
INDEX {ethIfIdx}
::= {ethIfTable 1}
EthIfEntry ::= SEQUENCE {
ethIfIdx Integer32,
ethMode INTEGER,
ethBridgingMode INTEGER,
ethEncapsulationCRCMode INTEGER,
ethBackPressure INTEGER,
ethLimit4 INTEGER,
ethSkipInitReset INTEGER,
ethMulticastBlock INTEGER,
ethBroadcastBlock INTEGER,
ethSpeed INTEGER,
ethRip2 INTEGER,
ethPortPriority INTEGER,
ethPortMngEnable INTEGER,
ethFlowCtrlMacAddress MacAddress,
ethRateLimit Integer32,
ethJumboFrameEnable INTEGER,
ethAutoMdiXEnable INTEGER,
ethPortDataEnable INTEGER,
ethIfUse Integer32,
ethLineOam INTEGER,
ethRoutingProtocol INTEGER,
ethMdiXManualSwitch INTEGER,
ethDot1xEnable INTEGER,
ethPartnerRateMode INTEGER,
ethDot1xPortRole INTEGER,
ethDhcpRequest INTEGER,
ethSfpCapabilities BITS
}
ethIfIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique index of the ethernet interface/port."
::= {ethIfEntry 1}
ethMode OBJECT-TYPE
SYNTAX INTEGER
{
halfDuplex (1),
fullDuplex (2),
notApplicable(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Ethernet mode of operation."
::= {ethIfEntry 2}
ethBridgingMode OBJECT-TYPE
SYNTAX INTEGER
{
filtered (1),
transparent (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the bridging mode of the Ethernet
interface. "
::= {ethIfEntry 3}
ethEncapsulationCRCMode OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
withCRC (2),
withoutCRC (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object define the encapsulation type requested for the
Ethernet interface. It indicates if we transfer the Ethernet
frame to the other side with or without the CRC. "
::= {ethIfEntry 4}
ethBackPressure OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
disable (2),
enable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether to enable or disable Back pressure.
Back Pressure is a flow control parameter. "
::= {ethIfEntry 5}
ethLimit4 OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
disable (2),
enable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter determine the Back off algorithm mode.
Every 4 following collisions the Framer will be thrown out
(4 times more than usuall)."
::= {ethIfEntry 6}
ethSkipInitReset OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
notSkip (2),
skip (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether read status on reset. "
::= {ethIfEntry 7}
ethMulticastBlock OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
unBlock (2),
block (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether to send multicast message to WAN from LAN or not. "
::= {ethIfEntry 8}
ethBroadcastBlock OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
unBlock (2),
block (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether to send broadcast message to WAN from LAN or not."
::= {ethIfEntry 9}
ethSpeed OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
s10Mbps (2),
s100Mbps (3),
s1Gbps (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines the line speed."
::= {ethIfEntry 10}
ethRip2 OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
no (2),
yes (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether to send RIP II message
to WAN from LAN or not"
::= {ethIfEntry 11}
ethPortPriority OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
none (2),
fixed (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines if priority is to
be considered for this Port."
::= {ethIfEntry 12}
ethPortMngEnable OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
no (2),
yes (3),
localOnly (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether management data can pass through this Port.
localOnly (4) - Only local device can be managed via this port."
::= {ethIfEntry 13}
ethFlowCtrlMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In case of flow control - transmit frame with this specific MAC address
to inform the other end to stop sending frames.
Default: 01.80.C2.00.00.01."
::= {ethIfEntry 14}
ethRateLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines the Rate Limit of the line, in Mbps."
::= {ethIfEntry 15}
ethJumboFrameEnable OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
no (2),
yes (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether to support Jumbo Frame or not."
::= {ethIfEntry 16}
ethAutoMdiXEnable OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
no (2),
yes (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether to support
automatic change between MDI and MDI[X]."
::= {ethIfEntry 17}
ethPortDataEnable OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
no (2),
yes (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines whether this port is enabled
for data (that is not management).
no(2) - management can run on this port
yes(3) - both management and payload data can run on this port."
::= {ethIfEntry 18}
ethIfUse OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines the use of the port.
1=NET
2=USER ."
::= {ethIfEntry 19}
ethLineOam OBJECT-TYPE
SYNTAX INTEGER
{
disable (2),
passive (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines the working mode of 802.AH OAM mechanism."
::= {ethIfEntry 20}
ethRoutingProtocol OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
none (2),
proprietary (3),
rip2 (4),
rip1and2 (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter defines the routing protocol
used above ETH port."
::= {ethIfEntry 21}
ethMdiXManualSwitch OBJECT-TYPE
SYNTAX INTEGER
{
crossOver (1),
straightThrough (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter sets the port to be MDI-X (cross-over) or
MDI (straight-through).
It is applicable only when ethAutoMdiXEnable = no, namely,
only when the automatic MDI/MDIX crossover function is disabled."
::= {ethIfEntry 22}
ethDot1xEnable OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
no (2),
yes (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines if the Port-Based Network Access Protocol
(IEEE-802.1x) is enabled for the Ethernet Port."
::= {ethIfEntry 23}
ethPartnerRateMode OBJECT-TYPE
SYNTAX INTEGER
{
manual (1),
automatic (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For converters having couples of ports, where each couple contains
a port with an SFP connector and a port with a RJ connector, this
parameter is relevant for the SFP port. It affects Rate configuration
of its partner (RJ port).
manual - user can configure manually ETH parameters of RJ port (e.g
Autonegotiation, Max Capability Advertised, etc...)
automatic - SFP Rate will be enforced on the RJ port. In this mode,
user cannot configure the Rate related parameters of the
RJ port (e.g Autonegotiation, Max Capability Advertised, etc...)"
::= {ethIfEntry 24}
ethDot1xPortRole OBJECT-TYPE
SYNTAX INTEGER
{
authenticator (1),
supplicant (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determine the functionality of the port in
the Port-Based Network Access Protocol (IEEE-802.1x) -
either Authenticator or Supplicant."
::= {ethIfEntry 25}
ethDhcpRequest OBJECT-TYPE
SYNTAX INTEGER
{
never (1),
normal (2),
whenUp (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determine the interface request for DHCP address after it goes up.
never - DHCP requests will never be sent to the interface.
normal - DHCP requests will be sent only if the device does not have an
address yet or if the address is going to expire
when-up - in addition to 'normal', DHCP requests will be sent whenever
the interface goes up. "
::= {ethIfEntry 26}
ethSfpCapabilities OBJECT-TYPE
SYNTAX BITS
{
speed10MFullAutoNegDisabled (0),
speed10MHalfAutoNegDisabled (1),
speed100MFullAutoNegDisabled (2),
speed100MHalfAutoNegDisabled (3),
speed1GFullAutoNegDisabled (4),
speed10GFullAutoNegDisabled (5),
autoNegConfigurable (6),
speed10MFullAutoNegEnabled (7),
speed10MHalfAutoNegEnabled (8),
speed100MFullAutoNegEnabled (9),
speed100MHalfAutoNegEnabled (10),
speed1GFullAutoNegEnabled (11),
speed10GFullAutoNegEnabled (12),
maxCapabilitiesAdvertised (13),
flowControlSupport (14),
sfpOpticInterface (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For each bit: '1' means that this attribute is supported.
Bits 0-5 are relevant when Auto Negotiation = Disabled.
'Full' means Full Duplex; 'Half' means Half Duplex.
When maxCapabilitiesAdvertised = '0', no speed is configurable.
sfpOpticInterface = '1' means that the interface is Optic;
'0' means that the interface is Electric."
::= {ethIfEntry 27}
--****************************
-- Ethernet Perfomance Section
--****************************
ethIfPerformance OBJECT IDENTIFIER ::= {ethIf 2}
ethIfCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ethernet Current table.
When the index specifies the Ethernet interface (only), the counters
are for an interval of 15 minutes."
::= { ethIfPerformance 1}
ethIfCurrentEntry OBJECT-TYPE
SYNTAX EthIfCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Ethernet Current table."
INDEX {ethIfCurrentIndex}
::= {ethIfCurrentTable 1}
EthIfCurrentEntry ::=
SEQUENCE {
ethIfCurrentIndex
Integer32,
ethIfCurrentStatus
OCTET STRING,
ethIfCurrentInFrames
Gauge32,
ethIfCurrentInOctets
Gauge32,
ethIfCurrentAlignmentErrors
Gauge32,
ethIfCurrentFCSErrors
Gauge32,
ethIfCurrentLengthError
Gauge32,
ethIfCurrentOutFrames
Gauge32,
ethIfCurrentOutOctets
Gauge32,
ethIfCurrentSingleCollisionFrames
Gauge32,
ethIfCurrentMultipleCollisionFrames
Gauge32,
ethIfCurrentDeferredTransmissions
Gauge32,
ethIfCurrentLateCollisions
Gauge32,
ethIfCurrentCarrierSenseErrors
Gauge32,
ethIfCurrentInputCongestionDropped
Gauge32,
ethIfCurrentOutputCongestionDropped
Gauge32,
ethIfCurrentOverflowInFrames
Gauge32,
ethIfCurrentOverflowInOctets
Gauge32,
ethIfCurrentOverflowFCSErrors
Gauge32,
ethIfCurrentOverflowOutFrames
Gauge32,
ethIfCurrentOverflowOutOctets
Gauge32,
ethIfCurrentOverflowMultipleCollisionFrames
Gauge32,
ethIfCurrentInUnicastFrames
Gauge32,
ethIfCurrentOutUnicastFrames
Gauge32,
ethIfCurrentInMulticastFrames
Gauge32,
ethIfCurrentOutMulticastFrames
Gauge32,
ethIfCurrentInBroadcastFrames
Gauge32,
ethIfCurrentOutBroadcastFrames
Gauge32,
ethIfCurrentInDiscardFrames
Gauge32,
ethIfCurrentOutDiscardFrames
Gauge32,
ethIfCurrentInPauseFrames
Gauge32,
ethIfCurrentOutPauseFrames
Gauge32,
ethIfCurrentOverflowInUnicastFrames
Gauge32,
ethIfCurrentOverflowOutUnicastFrames
Gauge32,
ethIfCurrentOverflowInMulticastFrames
Gauge32,
ethIfCurrentOverflowOutMulticastFrames
Gauge32,
ethIfCurrentOverflowInBroadcastFrames
Gauge32,
ethIfCurrentOverflowOutBroadcastFrames
Gauge32,
ethIfCurrentOverflowInDiscardFrames
Gauge32,
ethIfCurrentOverflowOutDiscardFrames
Gauge32,
ethIfCurrentOverflowInPauseFrames
Gauge32,
ethIfCurrentOverflowOutPauseFrames
Gauge32
}
ethIfCurrentIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Ethernet interface.
It may be ifIndex.
For some devices (e.g RICi-622GE), supporting several types of
intervals, this index will be a concatenation of the port index
and interval type.
Interval type can indicate: 1 minute, 15 minutes, 1 hour, 24 hours.
For the exact formula, see device specification."
::= { ethIfCurrentEntry 1 }
ethIfCurrentStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the current interval:
0 - Valid.
1 - redundantLinkSwitch - the link has been switched
by a redundancy mechanism.
2 - discontinuity - module was partialy out.
4 - notValid - module is out."
::= { ethIfCurrentEntry 2 }
ethIfCurrentInFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received frames,
encountered by the Ethernet interface in the current interval."
::= { ethIfCurrentEntry 3 }
ethIfCurrentInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received octets,
encountered by the Ethernet interface in the current interval."
::= { ethIfCurrentEntry 4 }
ethIfCurrentAlignmentErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received frames,
which are not complete (The result of dividing the number
of bits by 8 is not an Integer), encountered by the Ethernet
interface in the current interval."
::= { ethIfCurrentEntry 5 }
ethIfCurrentFCSErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received frames
that didn't pass the FCS test, encountered by the Ethernet
interface in the current interval."
::= { ethIfCurrentEntry 6 }
ethIfCurrentLengthError OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received frames
with length error, encountered by the Ethernet interface in
the current interval."
::= { ethIfCurrentEntry 7 }
ethIfCurrentOutFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transmitted frames,
encountered by the Ethernet interface in the current interval."
::= { ethIfCurrentEntry 8 }
ethIfCurrentOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transmitted octets,
encountered by the Ethernet interface in the current interval."
::= { ethIfCurrentEntry 9 }
ethIfCurrentSingleCollisionFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of successfully
transmitted frames for which transmission was inhibited by
exactly one collision, encountered by the Ethernet interface
in the current interval."
::= { ethIfCurrentEntry 10 }
ethIfCurrentMultipleCollisionFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of successfully
transmitted frames for which transmission was inhibited by
more than one collision, encountered by the Ethernet interface
in the current interval."
::= { ethIfCurrentEntry 11 }
ethIfCurrentDeferredTransmissions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transmitted frames
for which the first transmission attempt was delayed due to a
busy media, encountered by the Ethernet interface in the
current interval."
::= { ethIfCurrentEntry 12 }
ethIfCurrentLateCollisions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of times that a
collision was detected later than the first 64 bytes of the
frame, encountered by the Ethernet interface in the current
interval."
::= { ethIfCurrentEntry 13 }
ethIfCurrentCarrierSenseErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of times that the
carrier sense condition was lost or never asserted when
attempting to transmit a frame, encountered by the Ethernet
interface in the current interval."
::= { ethIfCurrentEntry 14 }
ethIfCurrentInputCongestionDropped OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of frames dropped
due to lack of buffers in ingress pool, encountered by
the Ethernet interface in the current interval."
::= { ethIfCurrentEntry 15 }
ethIfCurrentOutputCongestionDropped OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of dropped frames
due to a congestion, encountered by the Transmit direction
to the Ethernet interface in the current interval."
::= { ethIfCurrentEntry 16 }
ethIfCurrentOverflowInFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentInFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 17 }
ethIfCurrentOverflowInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentInOctets
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 18 }
ethIfCurrentOverflowFCSErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentFCSErrors
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 19 }
ethIfCurrentOverflowOutFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentOutFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 20 }
ethIfCurrentOverflowOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentOutOctets
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 21 }
ethIfCurrentOverflowMultipleCollisionFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentMultipleCollisionFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 22 }
ethIfCurrentInUnicastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Unicast frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 23 }
ethIfCurrentOutUnicastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Unicast frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 24 }
ethIfCurrentInMulticastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Multicast frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 25 }
ethIfCurrentOutMulticastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Multicast frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 26 }
ethIfCurrentInBroadcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Broadcast frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 27 }
ethIfCurrentOutBroadcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Broadcast frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 28 }
ethIfCurrentInDiscardFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Discarded frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 29 }
ethIfCurrentOutDiscardFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Discarded frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 30 }
ethIfCurrentInPauseFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Pause frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 31 }
ethIfCurrentOutPauseFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Pause frames, encountered by the
Ethernet interface in the current interval."
::= { ethIfCurrentEntry 32 }
ethIfCurrentOverflowInUnicastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentInUnicastFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 33 }
ethIfCurrentOverflowOutUnicastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentOutUnicastFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 34 }
ethIfCurrentOverflowInMulticastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentInMulticastFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 35 }
ethIfCurrentOverflowOutMulticastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentOutMulticastFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 36 }
ethIfCurrentOverflowInBroadcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentInBroadcastFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 37 }
ethIfCurrentOverflowOutBroadcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentOutBroadcastFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 38 }
ethIfCurrentOverflowInDiscardFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentInDiscardFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 39 }
ethIfCurrentOverflowOutDiscardFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentOutDiscardFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 40 }
ethIfCurrentOverflowInPauseFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentInPauseFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 41 }
ethIfCurrentOverflowOutPauseFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfCurrentOutPauseFrames
counter has overflowed in the current interval."
::= { ethIfCurrentEntry 42 }
--Interval Table
ethIfIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ethernet Interval table.
When ethIfIntervalIndex specifies the Ethernet interface (only),
the counters are for an interval of 15 minutes."
::= { ethIfPerformance 2 }
ethIfIntervalEntry OBJECT-TYPE
SYNTAX EthIfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Ethernet Interval table."
INDEX { ethIfIntervalIndex, ethIfIntervalNumber }
::= {ethIfIntervalTable 1}
EthIfIntervalEntry ::=
SEQUENCE {
ethIfIntervalIndex
Integer32,
ethIfIntervalNumber
Integer32,
ethIfIntervalStatus
OCTET STRING,
ethIfIntervalInFrames
Gauge32,
ethIfIntervalInOctets
Gauge32,
ethIfIntervalAlignmentErrors
Gauge32,
ethIfIntervalFCSErrors
Gauge32,
ethIfIntervalLengthError
Gauge32,
ethIfIntervalOutFrames
Gauge32,
ethIfIntervalOutOctets
Gauge32,
ethIfIntervalSingleCollisionFrames
Gauge32,
ethIfIntervalMultipleCollisionFrames
Gauge32,
ethIfIntervalDeferredTransmissions
Gauge32,
ethIfIntervalLateCollisions
Gauge32,
ethIfIntervalCarrierSenseErrors
Gauge32,
ethIfIntervalInputCongestionDropped
Gauge32,
ethIfIntervalOutputCongestionDropped
Gauge32,
ethIfIntervalOverflowInFrames
Gauge32,
ethIfIntervalOverflowInOctets
Gauge32,
ethIfIntervalOverflowFCSErrors
Gauge32,
ethIfIntervalOverflowOutFrames
Gauge32,
ethIfIntervalOverflowOutOctets
Gauge32,
ethIfIntervalOverflowMultipleCollisionFrames
Gauge32,
ethIfIntervalInUnicastFrames
Gauge32,
ethIfIntervalOutUnicastFrames
Gauge32,
ethIfIntervalInMulticastFrames
Gauge32,
ethIfIntervalOutMulticastFrames
Gauge32,
ethIfIntervalInBroadcastFrames
Gauge32,
ethIfIntervalOutBroadcastFrames
Gauge32,
ethIfIntervalInDiscardFrames
Gauge32,
ethIfIntervalOutDiscardFrames
Gauge32,
ethIfIntervalInPauseFrames
Gauge32,
ethIfIntervalOutPauseFrames
Gauge32,
ethIfIntervalOverflowInUnicastFrames
Gauge32,
ethIfIntervalOverflowOutUnicastFrames
Gauge32,
ethIfIntervalOverflowInMulticastFrames
Gauge32,
ethIfIntervalOverflowOutMulticastFrames
Gauge32,
ethIfIntervalOverflowInBroadcastFrames
Gauge32,
ethIfIntervalOverflowOutBroadcastFrames
Gauge32,
ethIfIntervalOverflowInDiscardFrames
Gauge32,
ethIfIntervalOverflowOutDiscardFrames
Gauge32,
ethIfIntervalOverflowInPauseFrames
Gauge32,
ethIfIntervalOverflowOutPauseFrames
Gauge32
}
ethIfIntervalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Ethernet interface.
It may be ifIndex.
For some devices (e.g RICi-622GE), supporting several types of
intervals, this index will be a concatenation of the port index and
interval type.
Interval type can indicate: 1 minute, 15 minutes, 1 hour, 24 hours.
For the exact formula, see device specification."
::= { ethIfIntervalEntry 1 }
ethIfIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Interval Number. This number is between 1 and x, where 1 is the
most recently completed interval and x is the least recently
completed interval.
For 15 minute intervals, usually x=96, but it can be different,
depending on device capabilities."
::= { ethIfIntervalEntry 2 }
ethIfIntervalStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the interval:
0 - Valid.
1 - redundantLinkSwitch - the link has been switched
by a redundancy mechanism.
2 - discontinuity - module was partialy out.
4 - notValid - module is out."
::= { ethIfIntervalEntry 3 }
ethIfIntervalInFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received frames,
encountered by the Ethernet interface in the interval."
::= { ethIfIntervalEntry 4 }
ethIfIntervalInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received octets,
encountered by the Ethernet interface in the interval."
::= { ethIfIntervalEntry 5 }
ethIfIntervalAlignmentErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received frames,
which are not complete (The result of dividing the number
of bits by 8 is not an Integer), encountered by the Ethernet
interface in the interval."
::= { ethIfIntervalEntry 6 }
ethIfIntervalFCSErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received frames
that didn't pass the FCS test, encountered by the Ethernet
interface in the interval."
::= { ethIfIntervalEntry 7 }
ethIfIntervalLengthError OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received frames
with length error, encountered by the Ethernet interface in
the interval."
::= { ethIfIntervalEntry 8 }
ethIfIntervalOutFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transmitted frames,
encountered by the Ethernet interface in the interval."
::= { ethIfIntervalEntry 9 }
ethIfIntervalOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transmitted octets,
encountered by the Ethernet interface in the interval."
::= { ethIfIntervalEntry 10 }
ethIfIntervalSingleCollisionFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of successfully
transmitted frames for which transmission was inhibited by
exactly one collision, encountered by the Ethernet
interface in the interval."
::= { ethIfIntervalEntry 11 }
ethIfIntervalMultipleCollisionFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of successfully
transmitted frames for which transmission was inhibited by
more than one collision, encountered by the Ethernet
interface in the interval."
::= { ethIfIntervalEntry 12 }
ethIfIntervalDeferredTransmissions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transmitted frames
for which the first transmission attempt was delayed due to a
busy media, encountered by the Ethernet interface in the interval."
::= { ethIfIntervalEntry 13 }
ethIfIntervalLateCollisions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of times that a
collision was detected later than the first 64 bytes of the
frame, encountered by the Ethernet interface in the interval."
::= { ethIfIntervalEntry 14 }
ethIfIntervalCarrierSenseErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of times that the
carrier sense condition was lost or never asserted when
attempting to transmit a frame, encountered by the Ethernet
interface in the interval."
::= { ethIfIntervalEntry 15 }
ethIfIntervalInputCongestionDropped OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of dropped frames
due to a congestion, encountered by the Receive direction
to the Ethernet interface in the interval."
::= { ethIfIntervalEntry 16 }
ethIfIntervalOutputCongestionDropped OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of dropped frames
due to a congestion, encountered by the Transmit direction
to the Ethernet interface in the interval."
::= { ethIfIntervalEntry 17 }
ethIfIntervalOverflowInFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalInFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 18 }
ethIfIntervalOverflowInOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalInOctets
counter has overflowed in the interval."
::= { ethIfIntervalEntry 19 }
ethIfIntervalOverflowFCSErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalFCSErrors
counter has overflowed in the interval."
::= { ethIfIntervalEntry 20 }
ethIfIntervalOverflowOutFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalOutFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 21 }
ethIfIntervalOverflowOutOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalOutOctets
counter has overflowed in the interval."
::= { ethIfIntervalEntry 22 }
ethIfIntervalOverflowMultipleCollisionFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalMultipleCollisionFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 23 }
ethIfIntervalInUnicastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Unicast frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 24 }
ethIfIntervalOutUnicastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Unicast frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 25 }
ethIfIntervalInMulticastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Multicast frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 26 }
ethIfIntervalOutMulticastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Multicast frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 27 }
ethIfIntervalInBroadcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Broadcast frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 28 }
ethIfIntervalOutBroadcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Broadcast frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 29 }
ethIfIntervalInDiscardFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Discarded frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 30 }
ethIfIntervalOutDiscardFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Discarded frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 31 }
ethIfIntervalInPauseFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received Pause frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 32 }
ethIfIntervalOutPauseFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted Pause frames, encountered by the
Ethernet interface in the interval."
::= { ethIfIntervalEntry 33 }
ethIfIntervalOverflowInUnicastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalInUnicastFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 34 }
ethIfIntervalOverflowOutUnicastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalOutUnicastFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 35 }
ethIfIntervalOverflowInMulticastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalInMulticastFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 36 }
ethIfIntervalOverflowOutMulticastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalOutMulticastFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 37 }
ethIfIntervalOverflowInBroadcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalInBroadcastFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 38 }
ethIfIntervalOverflowOutBroadcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalOutBroadcastFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 39 }
ethIfIntervalOverflowInDiscardFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalInDiscardFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 40 }
ethIfIntervalOverflowOutDiscardFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalOutDiscardFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 41 }
ethIfIntervalOverflowInPauseFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalInPauseFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 42 }
ethIfIntervalOverflowOutPauseFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated ethIfIntervalOutPauseFrames
counter has overflowed in the interval."
::= { ethIfIntervalEntry 43 }
ethPerformanceMode OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
countOK (2),
countFail (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether OK or Fail statistics will be counted."
::= {ethIfPerformance 3}
ethIfPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ethernet Performance table."
::= { ethIfPerformance 4}
ethIfPerfEntry OBJECT-TYPE
SYNTAX EthIfPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Ethernet Performance table."
INDEX {ethIfIdx}
::= {ethIfPerfTable 1}
EthIfPerfEntry ::= SEQUENCE {
ethIfPerfInOkFrames Gauge32,
ethIfPerfOutOkFrames Gauge32,
ethIfPerfTotalCollisions Gauge32,
ethIfPerfInOkOctets Gauge32
}
ethIfPerfInOkFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received OK frames,
encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2)
or Reset Statistics was done."
::= { ethIfPerfEntry 1 }
ethIfPerfOutOkFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transmitted OK frames,
encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2)
or Reset Statistics was done."
::= { ethIfPerfEntry 2 }
ethIfPerfTotalCollisions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the total number of collisions
of any type encountered by the Ethernet interface since
ethPerformanceMode Set to countOK (2) or Reset Statistics was done"
::= { ethIfPerfEntry 3 }
ethIfPerfInOkOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of received OK Octets,
encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2)
or Reset Statistics was done."
::= { ethIfPerfEntry 4 }
--****************************************
-- Ethernet Running Statistics Counters
--****************************************
ethIfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ethernet running statistics table. The table contains
running counters definition.
For counter reset use prtParamResetStatsCmd OBJECT."
::= { ethIfPerformance 5 }
ethIfStatsEntry OBJECT-TYPE
SYNTAX EthIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Ethernet running statistics table."
INDEX { ifIndex }
::= { ethIfStatsTable 1 }
EthIfStatsEntry ::= SEQUENCE {
ethIfStatsInOctets Counter64,
ethIfStatsInPkts Counter64,
ethIfStatsInUcastPkts Counter64,
ethIfStatsInMulticastPkts Counter64,
ethIfStatsInBroadcastPkts Counter64,
ethIfStatsInJabberPkts Counter64,
ethIfStatsInL2CPDiscardPkts Counter64,
ethIfStatsInCFMDiscardPkts Counter64,
ethIfStatsInACLDiscardPkts Counter64,
ethIfStatsInFCSErrorPkts Counter64,
ethIfStatsInMacOverflowPkts Counter64,
ethIfStatsInternalMacReceiveErrors Counter64,
ethIfStatsInUndersizePkts Counter64,
ethIfStatsInPkts64Octets Counter64,
ethIfStatsInPkts65to127Octets Counter64,
ethIfStatsInPkts128to255Octets Counter64,
ethIfStatsInPkts256to511Octets Counter64,
ethIfStatsInPkts512to1023Octets Counter64,
ethIfStatsInPkts1024to1518Octets Counter64,
ethIfStatsInPkts1519to2047Octets Counter64,
ethIfStatsInPkts1519toMaxOctets Counter64,
ethIfStatsInPkts2048toMaxOctets Counter64,
ethIfStatsInOversizePkts Counter64,
ethIfStatsInErrorPkts Counter64,
ethIfStatsOutOctets Counter64,
ethIfStatsOutPkts Counter64,
ethIfStatsOutUcastPkts Counter64,
ethIfStatsOutMulticastPkts Counter64,
ethIfStatsOutBroadcastPkts Counter64,
ethIfStatsOutDiscardPkts Counter64,
ethIfStatsOutPkts64Octets Counter64,
ethIfStatsOutPkts65to127Octets Counter64,
ethIfStatsOutPkts128to255Octets Counter64,
ethIfStatsOutPkts256to511Octets Counter64,
ethIfStatsOutPkts512to1023Octets Counter64,
ethIfStatsOutPkts1024to1518Octets Counter64,
ethIfStatsOutPkts1519to2047Octets Counter64,
ethIfStatsOutPkts2048toMaxOctets Counter64,
ethIfStatsOutOversizePkts Counter64,
ethIfStatsInUnMappedCosFrames Counter64,
ethIfStatsEgressMTUDiscarded Counter64,
ethIfStatsLastEgressMTUDiscardingFlow RowPointer
}
ethIfStatsInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface,
including framing characters.
Equivalent standard counter: 2863.ifHCInOctets
Caption: Total octets received"
::= { ethIfStatsEntry 1 }
ethIfStatsInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames,
broadcast frames, and multicast frames) received.
Equivalent standard counter: 3273.etherStatsHighCapacityPkts
Caption: Total frames received"
::= { ethIfStatsEntry 2 }
ethIfStatsInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frames, which were not addressed
to a multicast or broadcast address.
Equivalent standard counter: 2863.ifHCInUcastPkts
Caption: Unicast frames received"
::= { ethIfStatsEntry 3 }
ethIfStatsInMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frames, which were addressed
to a multicast address.
Equivalent standard counter: 2863.ifHCInMulticastPkts
Caption: Multicast frames received"
::= { ethIfStatsEntry 4 }
ethIfStatsInBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frames, which were addressed
to a broadcast address.
Equivalent standard counter: 2863.ifHCInBroadcastPkts
Caption: Broadcast frames received"
::= { ethIfStatsEntry 5 }
ethIfStatsInJabberPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that were longer than
the longest permitted packet (excluding framing bits, but
including FCS octets), and had either a bad Frame Check
Sequence (FCS) with an integral number of octets (FCS Error)
or a bad FCS with a non-integral number of octets
(Alignment Error). The maximal packet length is device
depended.
Equivalent standard counter: 2819.etherStatsJabbers
Caption: Jabber frames received"
::= { ethIfStatsEntry 6 }
ethIfStatsInL2CPDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of discarded L2CP frames received.
The l2cpStatTable.l2cpStatProtocol object defines list of
the Layer 2 protocol that is monitored.
Caption: L2CP RX frames discarded"
::= { ethIfStatsEntry 7 }
ethIfStatsInCFMDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded CFM frames received.
Caption: CFM RX frames discarded"
::= { ethIfStatsEntry 8 }
ethIfStatsInACLDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded ACL frames received.
Caption: ACL RX frames discarded"
::= { ethIfStatsEntry 9 }
ethIfStatsInFCSErrorPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that are an integral number
of octets in length but do not pass the FCS check. This
count does not include frames received with frame-too-long
or frame-too-short error.
Equivalent standard counter: 3635.dot3HCStatsFCSErrors
Caption: RX frames with bad FCS"
::= { ethIfStatsEntry 10 }
ethIfStatsInMacOverflowPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets discarded due to MAC FIFO
overflow.
Caption: MAC overload RX frames discarded"
::= { ethIfStatsEntry 11 }
ethIfStatsInternalMacReceiveErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that failed due to an
internal MAC receive error.
Equivalent standard counter: 3635.dot3HCStatsInternalMacReceiveErrors
Caption: MAC receive errors"
::= { ethIfStatsEntry 12 }
ethIfStatsInUndersizePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that were less than 64 octets
long (excluding framing bits, but including FCS octets) and
were otherwise well formed.
Equivalent standard counter: 2819.etherStatsUndersizePkts
Caption: Undersize frames received"
::= { ethIfStatsEntry 13 }
ethIfStatsInPkts64Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames) received
that were 64 bytes in length (excluding framing bits but
including FCS octets).
Equivalent standard counter: 3273.etherStatsHighCapacityPkts64Octets
Caption: 64-octet frames received"
::= { ethIfStatsEntry 14 }
ethIfStatsInPkts65to127Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames) received
that were between 65 and 127 octets in length (excluding
framing bits but including FCS octets).
Equivalent standard counter:
3273.etherStatsHighCapacityPkts65to127Octets
Caption: 65-to-127-octet frames received"
::= { ethIfStatsEntry 15 }
ethIfStatsInPkts128to255Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames) received
that were between 128 and 255 octets in length (excluding
framing bits but including FCS octets).
Equivalent standard counter:
3273.etherStatsHighCapacityPkts128to255Octets
Caption: 128-to-255-octet frames received"
::= { ethIfStatsEntry 16 }
ethIfStatsInPkts256to511Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames) received
that were between 256 and 511 octets in length (excluding
framing bits but including FCS octets).
Equivalent standard counter:
3273.etherStatsHighCapacityPkts256to511Octets
Caption: 256-to-511-octet frames received"
::= { ethIfStatsEntry 17 }
ethIfStatsInPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames) received
that were between 511 and 1023 octets in length (excluding
framing bits but including FCS octets).
Equivalent standard counter:
3273.etherStatsHighCapacityPkts512to1023Octets
Caption: 511-to-1023-octet frames received"
::= { ethIfStatsEntry 18 }
ethIfStatsInPkts1024to1518Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames) received
that were between 1024 and 1518 octets in length (excluding
framing bits but including FCS octets).
Equivalent standard counter:
3273.etherStatsHighCapacityPkts1024to1518Octets
Caption: 1024-to-1518-octet frames received"
::= { ethIfStatsEntry 19 }
ethIfStatsInPkts1519to2047Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames) received
that were between 1519 and 2047 octets in length (excluding
framing bits but including FCS octets).
Caption: 1519-to-2047-octet frames received"
::= { ethIfStatsEntry 20 }
ethIfStatsInPkts1519toMaxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames) received
that were between 1519 and maximum permitted size in length
(excluding framing bits but including FCS octets).
Caption: 1519-to-max-octet frames received"
::= { ethIfStatsEntry 21 }
ethIfStatsInPkts2048toMaxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad frames) received
that were between 2048 and maximum permitted size in length
(excluding framing bits but including FCS octets).
Caption: 2048-to-max-octet frames received"
::= { ethIfStatsEntry 22 }
ethIfStatsInOversizePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that exceed the maximum
permitted size.
Equivalent standard counter: 3635.dot3HCStatsFrameTooLongs
Caption: Oversize frames received"
::= { ethIfStatsEntry 23 }
ethIfStatsInErrorPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that contained errors
preventing them from being deliverable to a higher-layer
protocol.
Equivalent standard counter: 2863.ifInErrors
Caption: Error frames received"
::= { ethIfStatsEntry 24 }
ethIfStatsOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out the interface,
including framing characters.
Equivalent standard counter: 2863.ifHCOutOctets
Caption: Total octets transmitted"
::= { ethIfStatsEntry 25 }
ethIfStatsOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded.
Caption: Total TX frames"
::= { ethIfStatsEntry 26 }
ethIfStatsOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames, which were not addressed
to a multicast or broadcast address.
Equivalent standard counter: 2863.ifHCOutUcastPkts
Caption: Unicast frames transmitted"
::= { ethIfStatsEntry 27 }
ethIfStatsOutMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames, which were addressed
to a multicast address.
Equivalent standard counter: 2863.ifHCOutMulticastPkts
Caption: Multicast frames transmitted"
::= { ethIfStatsEntry 28 }
ethIfStatsOutBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames, which were addressed
to a broadcast address.
Equivalent standard counter: 2863.ifHCOutBroadcastPkts
Caption: Broadcast frames transmitted"
::= { ethIfStatsEntry 29 }
ethIfStatsOutDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of correct frames that higher-level protocols
requested be transmitted, which were discarded.
One possible reason for discarding such a packet could be
port disabled state.
Equivalent standard counter: 2863.ifOutDiscards
Caption: TX frames discarded"
::= { ethIfStatsEntry 30 }
ethIfStatsOutPkts64Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames that were 64 bytes
in length (excluding framing bits but including FCS octets).
Caption: 64-octet frames transmitted"
::= { ethIfStatsEntry 31 }
ethIfStatsOutPkts65to127Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames that were between
65 and 127 octets in length (excluding framing bits
but including FCS octets).
Caption: 65-to-127-octet frames transmitted"
::= { ethIfStatsEntry 32 }
ethIfStatsOutPkts128to255Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames that were between
128 and 255 octets in length (excluding framing bits
but including FCS octets).
Caption: 128-to-255-octet frames transmitted"
::= { ethIfStatsEntry 33 }
ethIfStatsOutPkts256to511Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames that were between
256 and 511 octets in length (excluding framing bits
but including FCS octets).
Caption: 256-to-511-octet frames transmitted"
::= { ethIfStatsEntry 34 }
ethIfStatsOutPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames that were between
511 and 1023 octets in length (excluding framing bits
but including FCS octets).
Caption: 511-to-1023-octet frames transmitted"
::= { ethIfStatsEntry 35 }
ethIfStatsOutPkts1024to1518Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames that were between
1024 and 1518 octets in length (excluding framing bits
but including FCS octets).
Caption: 1024-to-1518-octet frames transmitted"
::= { ethIfStatsEntry 36 }
ethIfStatsOutPkts1519to2047Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames that were between
1519 and 2047 octets in length (excluding framing bits
but including FCS octets).
Caption: 1519-to-2047-octet frames transmitted"
::= { ethIfStatsEntry 37 }
ethIfStatsOutPkts2048toMaxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames that were between
2048 and maximum permitted size in length (excluding
framing bits but including FCS octets).
Caption: 2048-to-max-octet frames transmitted"
::= { ethIfStatsEntry 38 }
ethIfStatsOutOversizePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that higher-level protocols requested
to be transmitted, which exceed the maximum permitted size.
These frames are discarded.
Caption: Oversize TX frames"
::= { ethIfStatsEntry 39 }
ethIfStatsInUnMappedCosFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that dropped due to mapping to a cos level
which is not defined at the flow envelope profile or multicos counter definition.
Caption: Unmapped CoS frames received"
::= { ethIfStatsEntry 40 }
ethIfStatsEgressMTUDiscarded OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames which were dropped because they
were exceeding the egress MTU limit configured over the port"
::= { ethIfStatsEntry 42 }
ethIfStatsLastEgressMTUDiscardingFlow OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pointer to the last flow on which frames were discarded because
they were exceeding the egress MTU limit configured over the port.
ZeroDotZero is the initial value, returned when MTU was not ever exceeded."
::= { ethIfStatsEntry 43 }
-- ===========================================
-- refer to oamCfm.txt file
-- ==========================================
-- ETH Ring Definition
ethIfRing OBJECT IDENTIFIER ::= { ethIf 4 }
ethIfRingEvents OBJECT IDENTIFIER ::= { ethIfRing 0 }
ethIfRingTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Ring Table."
::= { ethIfRing 1 }
ethIfRingEntry OBJECT-TYPE
SYNTAX EthIfRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table."
INDEX { ethIfRingIdx }
::= { ethIfRingTable 1 }
EthIfRingEntry ::=
SEQUENCE {
ethIfRingIdx Unsigned32,
ethIfRingAdminStatus INTEGER,
ethIfRingPorts PortList,
ethIfRingOperStatus INTEGER,
ethIfRingKeepAliveInterval Unsigned32,
ethIfRingKeepAliveThresh Unsigned32,
ethIfRingKeepAliveVlanId Unsigned32,
ethIfRingMultiCastVlanId Unsigned32,
ethIfRingRowStatus INTEGER
}
ethIfRingIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is an Index that can indicate
Slot, Ring, Cnfg etc., according to the device used.
When NA, 1 will be used."
::= { ethIfRingEntry 1 }
ethIfRingAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
down (2),
up (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the Ethernet Ring administrative status."
::= { ethIfRingEntry 2 }
ethIfRingPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports which are assigned to be ring members.
The default value of this object is a string of zeros."
::= {ethIfRingEntry 3}
ethIfRingOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
open (2),
close (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Ethernet Ring operational status."
::= { ethIfRingEntry 4 }
ethIfRingKeepAliveInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter indicates the period of time (in msec.)
between two consequent Keep Alive messages."
::= { ethIfRingEntry 5 }
ethIfRingKeepAliveThresh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter indicates the maximum number of
missed Keep Alive answer messages acceptable, after which link status will be failed."
::= { ethIfRingEntry 6 }
ethIfRingKeepAliveVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dedicated VLAN ID for keep alive messages."
::= { ethIfRingEntry 7 }
ethIfRingMultiCastVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dedicated VLAN ID for multicast messages."
::= { ethIfRingEntry 8 }
ethIfRingRowStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destroy(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Implement creation/deletion of rings in the device."
::= { ethIfRingEntry 9 }
--ETH RING NOTIFICATIONS
ethIfRingStatusChange NOTIFICATION-TYPE
OBJECTS {ethIfRingOperStatus}
STATUS current
DESCRIPTION
"This trap indicates that the status of the
Ethernet Ring has been changed."
::= { ethIfRingEvents 1 }
--ERP = Ethernet Ring Protection, according to G.8032
erp OBJECT IDENTIFIER ::= { ethIfRing 2 }
erpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Ring Protection (ERP) G.8032 Table."
::= { erp 1 }
erpEntry OBJECT-TYPE
SYNTAX ErpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table."
INDEX { erpIdx }
::= { erpTable 1 }
ErpEntry ::= SEQUENCE {
erpIdx Unsigned32,
erpRowStatus RowStatus,
erpAdminStatus INTEGER,
erpNodeState INTEGER,
erpBridgeNum Unsigned32,
erpEastPort Integer32,
erpWestPort Integer32,
erpRplPort INTEGER,
erpRapsVlanId Unsigned32,
erpOamCfmMel Unsigned32,
erpWTR Unsigned32,
erpWTRStatus Unsigned32,
erpGuardTimer Unsigned32,
erpHoldoffTimer Unsigned32,
erpForceSfCmd INTEGER,
erpClearStatistics BITS,
erpRapsVlanPriority Unsigned32,
erpDescr SnmpAdminString,
erpRingType INTEGER,
erpWTBStatus Unsigned32,
erpRevertiveMode INTEGER,
erpBackwardCompatibility TruthValue,
erpTopologyChangepropogation INTEGER,
erpInterconnectionNode TruthValue,
erpCommand INTEGER,
erpCommandParam INTEGER,
erpEastPhyPort Unsigned32,
erpWestPhyPort Unsigned32,
erpCosMapProfile Unsigned32,
erpVirtualChannel INTEGER,
erpPassthroughVids OCTET STRING,
erpColorMapProfile Unsigned32,
erpPassthroughQueueBlockEast RowPointer,
erpPassthroughQueueBlockWest RowPointer
}
erpIdx OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the unique Ethernet Protection Ring number."
::= { erpEntry 1 }
erpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables creation and deletion of entries
in the erpTable."
::= { erpEntry 2 }
erpAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
down (2),
up (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object determines the Ethernet Protection Ring
Administrative Status.
Value cannot be changed to Up,if erpRowStatus=notReady.
Value cannot be changed to Up,if the following column
objects, have default values:
- erpEastPort
- erpWestPort
- erpRapsVlanId
- erpPortMel for any of the Ring Ports (see erpPortTable below)
Default=down."
::= { erpEntry 3 }
erpNodeState OBJECT-TYPE
SYNTAX INTEGER
{
init (1),
idle (2),
protected (3),
manualSwitch (4),
forcedSwitch (5),
pending (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates Node state of the Ethernet
Protection Ring.
init=initial state
idle=normal operation
protected=protection state."
::= { erpEntry 4 }
erpBridgeNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Bridge number the ERP ports belong to.
Default=1."
::= { erpEntry 5 }
erpEastPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ifIndex of the Bridge Port, that is the East Port
of the ERP. This Bridge Port belongs to erpBridgeNum.
Default=0."
::= { erpEntry 6 }
erpWestPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ifIndex of the Bridge Port, that is the West Port
of the ERP. This Bridge Port belongs to erpBridgeNum.
Default=0."
::= { erpEntry 7 }
erpRplPort OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(1),
east (2),
west (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is in use only in ERPv1 (not in use in ERPv2).
It indicates the Ring Port, that has the role of RPL.
notApplicable(1) if none of the ERP Ports serves as RPL
erpEastPort(2) if the east port serves as RPL
erpWestPort (3) if the west port serves as RPL
DEFVAL{ notApplicable }."
::= { erpEntry 8 }
erpRapsVlanId OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID used for Ring APS (RAPS) messages.
Valid values are: 1..4094.
Value must be different, for different erpIdx.
Default=0."
::= { erpEntry 9 }
erpOamCfmMel OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ERP MEL (Maintenance Entity Group Level).
Valid values are: 0..7.
Default=255."
::= { erpEntry 10 }
erpWTR OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Wait to Restore (WTR) time in msec.
After the failed working transport entity recovers,
in order to prevent frequent operations of the
protection switch due to an intermittent defect,
a fixed period of time will pass before
traffic channel uses it again. This period of time
is the WTR time.
Valid values are: 60,000..720,000 in steps
of 60,000 (1-12 minutes in steps of 1 minute).
Default=300,000 msec (=5 minutes)."
::= { erpEntry 11 }
erpWTRStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wait to Restore (WTR) status.
When equals 0 - WTR is stopped.
Otherwise - WTR is running.
When WTR is running, there are two cases:
- If Agent supports counting down the WTR (from erpWTR to 0), this object
will represent the current value in the same units as erpWTR.
- If Agent doesn't support counting down the WTR, this object = 2^32-1."
::= { erpEntry 12 }
erpGuardTimer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Guard Timer in msec.
The guard timer is used to prevent ring nodes
from receiving outdated R-APS messages.
During the duration of the Guard Timer, all received
R-APS messages, are ignored by the ring protection control
process.
This timer should be greater than the maximum expected
forwarding delay for which one R-APS message, circles
around the ring.
Valid values are: 10..2,000 in steps of 10.
Default=500 msec."
::= { erpEntry 13 }
erpHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Holdoff Timer in msec.
When Holdoff Timer>0, the Local SF signal starts the timer
and doesn't trigger the Ring Protection immediately.
In this case, when Holdoff Timer expired (or 0 initially),
the Local SF signal will immediately trigger the R-APS
Protection Logic.
Valid values are: 0..10,000 in steps of 100.
Default=0=not applicable."
::= { erpEntry 14 }
erpForceSfCmd OBJECT-TYPE
SYNTAX INTEGER
{
off (2),
eastOn (3),
westOn (4),
eastClear (5),
westClear (6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SF (Signal Fail) command on a port of ERP.
eastOn= enforce SF command to East Port of ERP
westOn= enforce SF command to West Port of ERP
eastClear= Clear existing enforced SF command to East Port of ERP
westClear= Clear existing enforced SF command to West Port of ERP
After any of the above commands is Set, Agent will turn the value
automatically to off.
Default=off."
::= { erpEntry 15 }
erpClearStatistics OBJECT-TYPE
SYNTAX BITS
{
east(0),
west(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" bit 0 - Clear statistics command for ERP east port(when equals 1). It will cause
clearing all Statistics counters of this ERP port.
bit 1 - Clear statistics command for ERP west port(when equals 1). It will cause
clearing all Statistics counters of this ERP port.
Agent will automatically change the value of all bits to '0', after performing the
command. "
::= { erpEntry 16 }
erpRapsVlanPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Priority of the VLAN used for Ring APS (RAPS) messages.
Valid values are: 0..7.
Default=7."
::= { erpEntry 17 }
erpDescr OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description of the current ERP entry.
Default description will be: ' '
"
::= { erpEntry 18 }
erpRingType OBJECT-TYPE
SYNTAX INTEGER
{
majorRing (1),
subRing (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object determines the Ring's type: MajorRing or SubRing.
Default=majorRing(1)
"
::= { erpEntry 19 }
erpWTBStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wait To Block (WTR) status.
When equals 0 - WTR is stopped.
Otherwise - WTR is running.
When WTR is running, there are two cases:
- If Agent supports counting down the WTR (from erpWTR to 0), this object
will represent the current value in the same units as erpWTR.
- If Agent doesn't support counting down the WTR, this object = 2^32-1.
"
::= { erpEntry 20 }
erpRevertiveMode OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
disable (2),
enable (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"In revertive operation, the traffic channel is restored to the
working transport entity, i.e., blocked on teh RPL, once the case of
clearing the defect, and after the expiration of the WTR timer.
In non-revertive operation, the traffic channel continues to use the
RPL, even after the defect the caused the RPL to unblocked was cleared.
Default=notApplicable(1). Once the Node is defined as RPL owner, this
object must be equal to disable(3) or enable(3).
"
::= { erpEntry 21 }
erpBackwardCompatibility OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the Ring Node of ERPv2 is part of a Ring, that is composed of
other Ring Nodes with ERPv1, it has to run in Compatibility Mode.
This mode filters the configuration and requests of ERPv2. Default value
shall be false(2).
"
::= { erpEntry 22 }
erpTopologyChangepropogation OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
disable (2),
enable (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether to execute Flush Database (FDB) or not
in case the RPL owner will unblock the RPL Port. ERPv2 requires FDB in
order to relearn the correct filtering entities, however in cases where
the logical topology of a client has not changed as a result of failure,
recovery or administrative operation, it is not necessary to FDB.
Default value will be disable(2).
"
::= { erpEntry 23 }
erpInterconnectionNode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user will be able to configure the Node as an interconnection Node,
i.e., a Node that shares more than one Ring. Default value
shall be false(2).
"
::= { erpEntry 24 }
erpCommand OBJECT-TYPE
SYNTAX INTEGER
{
force (1),
manual (2),
clear (3),
noCommand (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the external command the user can initiate
on the Node: Force Switch(1), Manual Switch(2), clearing any previous
command(3), or having no command at all (4). Default is noCommand(4).
"
::= { erpEntry 25 }
erpCommandParam OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
eastPort (2),
westPort (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the port to which the external command
(erpCommand) will be issued. Default is notApplicable(1).
"
::= { erpEntry 26 }
erpEastPhyPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ifIndex of east Ethernet port."
::= { erpEntry 27}
erpWestPhyPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ifIndex of west Ethernet port."
::= { erpEntry 28}
erpCosMapProfile OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute point to the CoS mapping profile Table (cosInternalProfileTable)."
::= { erpEntry 29 }
erpVirtualChannel OBJECT-TYPE
SYNTAX INTEGER
{
disable (2),
enable (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines whether or not virtual channel is used.
It is only relevant for subring nodes, and ignored by major ring nodes.
"
DEFVAL { enable }
::= { erpEntry 30 }
erpPassthroughVids OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(512))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains a 4096 bit vector indicating VIDs passing
through the ring, without being terminated like data VLANs are.
The high order bit of the first octet corresponds to the
first bit of the vector, while the low order bit of the last octet
corresponds to the last bit of the vector.
A bit that is on (equal to 1) indicates that the corresponding VID
is a passthrough VLAN.
An example: If the first octet is 0x70 the rest are 0, VIDs 1-3
are passthrough VLANs."
DEFVAL { ''H }
::= { erpEntry 31 }
erpColorMapProfile OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this object is zero DEI is used.
Otherwise, it is the index of a mapping profile."
DEFVAL { 0 }
::= { erpEntry 32 }
erpPassthroughQueueBlockEast OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"East queue block for passthrough VLANs.
The object points to an existing entry of rad.queueGroupTable.
zeroDotZero means the designated default queue block."
DEFVAL { zeroDotZero }
::= { erpEntry 33 }
erpPassthroughQueueBlockWest OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"West queue block for passthrough VLANs.
The object points to an existing entry of rad.queueGroupTable.
zeroDotZero means the designated default queue block."
DEFVAL { zeroDotZero }
::= { erpEntry 34 }
--****************
--ERP Port Table
--****************
erpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Ring Protection (G.8032)Port Table."
::= { erp 2 }
erpPortEntry OBJECT-TYPE
SYNTAX ErpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table. Rings are created in erpTable.
If erpRowStatus=notReady, this table may not include
data for this instance of the ERP."
INDEX { erpIdx, erpPortIdx }
::= { erpPortTable 1 }
ErpPortEntry ::= SEQUENCE {
erpPortIdx INTEGER,
erpPortOamCfmMdId Unsigned32,
erpPortOamCfmMaId Unsigned32,
erpPortOamCfmMepId Unsigned32,
erpPortState INTEGER,
erpPortLocalSfSource INTEGER,
erpPortRapsRxValidMsg Counter32,
erpPortRapsRxInvalidMsg Counter32,
erpPortRapsRxSfMsg Counter32,
erpPortRapsRxNrMsg Counter32,
erpPortRapsRxNrrbMsg Counter32,
erpPortRapsTxValidMsg Counter32,
erpPortRapsTxInvalidMsg Counter32,
erpPortRapsTxSfMsg Counter32,
erpPortRapsTxNrMsg Counter32,
erpPortRapsTxNrrbMsg Counter32,
erpPortDescr SnmpAdminString,
erpPortRapsRxFsMsg Counter32,
erpPortRapsRxMsMsg Counter32,
erpPortRapsRxDnfMsg Counter32,
erpPortRapsRxEvtMsg Counter32,
erpPortRapsTxFsMsg Counter32,
erpPortRapsTxMsMsg Counter32,
erpPortRapsTxDnfMsg Counter32,
erpPortRapsTxEvtMsg Counter32,
erpPortType INTEGER
}
erpPortIdx OBJECT-TYPE
SYNTAX INTEGER
{
east (1),
west (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is the ERP Port, all table objects refer."
::= { erpPortEntry 1 }
erpPortOamCfmMdId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the Maintenance Domain used by this ERP Port.
Default=0=not applicable."
::= { erpPortEntry 2 }
erpPortOamCfmMaId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the Maintenance Association in the erpPortOamCfmMdId,
used by this ERP Port.
Default=0=not applicable."
::= { erpPortEntry 3 }
erpPortOamCfmMepId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the MEP (Maintenance Entity Group End Point)in the
relevant erpPortOamCfmMdId and erpPortOamCfmMaId, used by this ERP Port.
Default=0=not applicable.
Applicable Values=1..8191."
::= { erpPortEntry 4 }
erpPortState OBJECT-TYPE
SYNTAX INTEGER
{
blocked (2),
forwarding (3),
rAPSAndDataChannelBlocked (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of the ERP Port.
blocked(2) means only Data Channel is blocked.
"
::= { erpPortEntry 5 }
erpPortLocalSfSource OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(1),
serverLayer (2),
oamCfm (3),
forced (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal Fail Local Source of the ERP Port:
- notApplicable - no Signal Fail (so no source)
- serverLayer - Signal Fail is received from the port
- oamCfm - Signal Fail is received from OAM CFM process
- forced - Signal Fail is forced by manual user command
of erpForceSfCmd (eastOn(3), westOn(4);
(see erpTable)."
::= { erpPortEntry 6 }
erpPortRapsRxValidMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Received Valid RAPS (RING APS) messages, since [both ports
of the Ring are defined (erpEastPort>0, erpWestPort>0; see erpTable),
and erpRapsVlanId>0 (see erpTable) and erpPortMel<>255 for both Ring
ports] or since last statistics clear operation."
::= { erpPortEntry 7 }
erpPortRapsRxInvalidMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Received Invalid RAPS (RING APS) messages on this port,
since [both ports of the Ring are defined (erpEastPort>0,
and erpWestPort>0; see erpTable), erpRapsVlanId>0 (see erpTable)
and erpOamCfmMel<>255 (see erpTable)] or since last statistics
clear operation."
::= { erpPortEntry 8 }
erpPortRapsRxSfMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received SF (Signal Fail) RAPS (RING APS) messages on this port,
since [both ports of the Ring are defined (erpEastPort>0,
and erpWestPort>0; see erpTable), erpRapsVlanId>0 (see erpTable)
and erpOamCfmMel<>255 (see erpTable)] or since last statistics
clear operation.
Received SF message means that there are failed ports in the Ring."
::= { erpPortEntry 9 }
erpPortRapsRxNrMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received NR (No Request) RAPS (RING APS) messages on this port,
since [both ports of the Ring are defined (erpEastPort>0,
and erpWestPort>0; see erpTable), erpRapsVlanId>0 (see erpTable)
and erpOamCfmMel<>255 (see erpTable)] or since last statistics
clear operation.
Received NR message means that there are NO failed ports in the Ring."
::= { erpPortEntry 10 }
erpPortRapsRxNrrbMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received NRRB (No Request and RPL Blocked indication) RAPS (RING APS)
messages on this port, since [both ports of the Ring are defined
(erpEastPort>0, and erpWestPort>0; see erpTable), erpRapsVlanId>0
(see erpTable)and erpOamCfmMel<>255 (see erpTable)] or since last
statistics clear operation.
Received NRRB message means that the RPL Port is blocked and all other
not-failed blocked Ports, will be unblocked in the Ring."
::= { erpPortEntry 11 }
erpPortRapsTxValidMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Transmitted Valid RAPS (RING APS) messages, since [both ports
of the Ring are defined (erpEastPort>0, and erpWestPort>0; see erpTable),
erpRapsVlanId>0 (see erpTable) and erpOamCfmMel<>255 (see erpTable)] or
since last statistics clear operation."
::= { erpPortEntry 12 }
erpPortRapsTxInvalidMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Transmitted Invalid RAPS (RING APS) messages on this port,
since [both ports of the Ring are defined (erpEastPort>0,
and erpWestPort>0; see erpTable), erpRapsVlanId>0 (see erpTable)
and erpOamCfmMel<>255 (see erpTable)] or since last statistics
clear operation."
::= { erpPortEntry 13 }
erpPortRapsTxSfMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted SF (Signal Fail) RAPS (RING APS) messages on this port,
since [both ports of the Ring are defined (erpEastPort>0,
and erpWestPort>0; see erpTable), erpRapsVlanId>0 (see erpTable)
and erpOamCfmMel<>255 (see erpTable)] or since last statistics
clear operation.
Transmitted SF message means, that the transmitting Node has a failed port."
::= { erpPortEntry 14 }
erpPortRapsTxNrMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted NR (No Request) RAPS (RING APS) messages on this port,
since [both ports of the Ring are defined (erpEastPort>0,
and erpWestPort>0; see erpTable), erpRapsVlanId>0 (see erpTable)
and erpOamCfmMel<>255 (see erpTable)] or since last statistics
clear operation.
Transmitted NR message means, that there was recovery of the
failed port, for the transmitting Node."
::= { erpPortEntry 15 }
erpPortRapsTxNrrbMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted NRRB (No Request and RPL Blocked indication) RAPS (RING APS)
messages on this port, since [both ports of the Ring are defined
(erpEastPort>0, and erpWestPort>0; see erpTable), erpRapsVlanId>0
(see erpTable)and erpOamCfmMel<>255 (see erpTable)] or since last
statistics clear operation.
Transmitted NRRB message (from RPL only) means, that the RPL Port
is blocked for the transmitting Node."
::= { erpPortEntry 16 }
erpPortDescr OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description of the current ERP port entry.
Default description will be: ' '
"
::= { erpPortEntry 17 }
erpPortRapsRxFsMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received FS (Force Switch) RAPS (RING APS) messages on this port.
"
::= { erpPortEntry 18 }
erpPortRapsRxMsMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received MS (Manual Switch) RAPS (RING APS) messages on this port.
"
::= { erpPortEntry 19 }
erpPortRapsRxDnfMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received messages with DNF(Do Not Flush) bit=on on this port.
"
::= { erpPortEntry 20 }
erpPortRapsRxEvtMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total received RAPS (RING APS) Event-messages on this port.
"
::= { erpPortEntry 21 }
erpPortRapsTxFsMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted FS (Force Switch) RAPS (RING APS) messages on this port.
"
::= { erpPortEntry 22 }
erpPortRapsTxMsMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted MS (Manual Switch) RAPS (RING APS) messages on this port.
"
::= { erpPortEntry 23 }
erpPortRapsTxDnfMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted messages with DNF(Do Not Flush) bit=on on this port.
"
::= { erpPortEntry 24 }
erpPortRapsTxEvtMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total transmitted RAPS (RING APS) Event-messages on this port.
"
::= { erpPortEntry 25 }
erpPortType OBJECT-TYPE
SYNTAX INTEGER
{
nodePort (1),
rpl (2),
neighbor (3),
nextNeighbor (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object is used only in ERPv2 (not in use in ERPv1).
rpl(2) if the port is RPL owner.
neighbor(3) if the port is RPL Neighbor.
nextNeighbor(4) if the port is RPL Next-Neighbor.
nodePort (1) if the port is none of the above.
DEFVAL{ nodePort }
"
::= { erpPortEntry 26 }
-- ****************
-- ERP Sub Ring Table
-- ****************
erpSubRingTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpSubRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Ring Protection (ERP) G.8032 Sub Ring Table."
::= { erp 4 }
erpSubRingEntry OBJECT-TYPE
SYNTAX ErpSubRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table."
INDEX { erpSubRingMajorRingIndex, erpSubRingSubRingIndex }
::= { erpSubRingTable 1 }
ErpSubRingEntry ::= SEQUENCE {
erpSubRingMajorRingIndex Unsigned32,
erpSubRingSubRingIndex Unsigned32,
erpSubRingRowStatus RowStatus,
erpSubRingVirtualChannel INTEGER,
erpSubRingRAPSVlanId Unsigned32,
erpSubRingRAPSVlanPriority Unsigned32
}
erpSubRingMajorRingIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index represents the Major Ring ID."
::= { erpSubRingEntry 1 }
erpSubRingSubRingIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index represents the Sub Ring ID."
::= { erpSubRingEntry 2 }
erpSubRingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables creation and deletion of entries
in the erpSubRingTable."
::= { erpSubRingEntry 3 }
erpSubRingVirtualChannel OBJECT-TYPE
SYNTAX INTEGER
{
disable (2),
enable (3)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object is currently deprecated, and replaced by erpVirtualChannel.
When setting this value, erpVirtualChannel will be set to the same value.
The original description: When Major Ring provides Virtual Channel to Sub-ring
it is aware of topology changes in the Sub-Ring."
::= { erpSubRingEntry 4 }
erpSubRingRAPSVlanId OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID for Ring APS messages.
Valid values are: 1..4094. Default=0."
::= { erpSubRingEntry 5 }
erpSubRingRAPSVlanPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Priority of the VLAN used for Ring APS (RAPS) messages for Sub Ring in Major Ring Channels.
Valid values are: 0..7.
Default=0."
::= { erpSubRingEntry 6 }
-- ERP Vlan Table
erpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Ring Protection (ERP) Data Vlan Table."
::= { erp 5 }
erpVlanEntry OBJECT-TYPE
SYNTAX ErpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table."
INDEX { erpIdx, erpVlanIdx }
::= { erpVlanTable 1 }
ErpVlanEntry ::= SEQUENCE {
erpVlanIdx Unsigned32,
erpVlanRowStatus RowStatus,
erpVlanEastQblock OBJECT IDENTIFIER,
erpVlanWestQblock OBJECT IDENTIFIER,
erpVlanServiceIdName SnmpAdminString,
erpVlanMajorEastQblock OBJECT IDENTIFIER,
erpVlanMajorWestQblock OBJECT IDENTIFIER
}
erpVlanIdx OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index represents the data Vlan."
::= { erpVlanEntry 1 }
erpVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowStatus is use to create and delete row in the table."
::= { erpVlanEntry 2 }
erpVlanEastQblock OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the East Qblock."
::= { erpVlanEntry 3 }
erpVlanWestQblock OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the West Qblock."
::= { erpVlanEntry 4 }
erpVlanServiceIdName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute defines the Service name of this erp Vlan Service,
if the VLAN is not associated with a Service the value is null.
Upon seting a value, the agent creates an entry in
serviceIdTable table."
::= { erpVlanEntry 5 }
erpVlanMajorEastQblock OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the Major East Qblock and relevant
only if erpInterconnectionNode = true(1)."
::= { erpVlanEntry 6 }
erpVlanMajorWestQblock OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the Major West Qblock and relevant
only if erpInterconnectionNode = true(1)."
::= { erpVlanEntry 7 }
-- ETH Storming
ethIfStorming OBJECT IDENTIFIER ::= { ethIf 5 }
ethIfStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Storming Table."
::= { ethIfStorming 1 }
ethIfStormEntry OBJECT-TYPE
SYNTAX EthIfStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table."
INDEX {ethIfStormCnfgIdx, ethIfStormIfIdx, ethIfStormDirection, ethIfStormPacketType }
::= { ethIfStormTable 1 }
EthIfStormEntry ::=
SEQUENCE {
ethIfStormCnfgIdx Unsigned32,
ethIfStormIfIdx Unsigned32,
ethIfStormDirection INTEGER,
ethIfStormPacketType BITS,
ethIfStormCtrlEnable INTEGER,
ethIfStormMaxRate Unsigned32
}
ethIfStormCnfgIdx OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg."
::= {ethIfStormEntry 1}
ethIfStormIfIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique index of the ethernet interface/port."
::= {ethIfStormEntry 2}
ethIfStormDirection OBJECT-TYPE
SYNTAX INTEGER {
all (1),
ingress (2),
egress (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the port's Storm Direction."
::= { ethIfStormEntry 3 }
ethIfStormPacketType OBJECT-TYPE
SYNTAX BITS
{
unknownUnicast (0), --Flooded Unicast
broadcast (1),
multicast (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Packet Type on which Storming operations will be performed."
::= { ethIfStormEntry 4 }
ethIfStormCtrlEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable (2),
enable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the Storm Controling is Enabled or Disabled
for the relevant entry."
::= { ethIfStormEntry 5 }
ethIfStormMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Maximum Rate at which Storming packets are forwarded,
in Kbps.For some devices the units are PPS(Packets Per Second ) or kilobytes
per second."
::= { ethIfStormEntry 6 }
-- ETH OAM EFM: 802.3ah
ethIfOamEfm OBJECT IDENTIFIER ::= { ethIf 6 }
dot3OamEvents OBJECT IDENTIFIER ::= { ethIfOamEfm 0 }
dot3OamOperStatusChange NOTIFICATION-TYPE
OBJECTS { dot3OamOperStatus }
STATUS current
DESCRIPTION
"This trap is sent when OAM EFM Link goes Up or Down.
Up - is considered when dot3OamOperStatus value changes to operational(9)
from any other value.
Down - is considered when dot3OamOperStatus value changes from operational(9)
to any other value."
::= { dot3OamEvents 1 }
dot3OamPeerEvent NOTIFICATION-TYPE
OBJECTS { dot3OamXPeerState }
STATUS current
DESCRIPTION
"This trap is sent when value of dot3OamXPeerState changes from any value
to one of the following values: linkFault, dyingGasp, criticalEvent.
This trap has no recovery (clearing value)."
::= { dot3OamEvents 2 }
dot3OamDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3OamDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports definitions of Descriptors (profiles) of OAM EFM Links."
::= {ethIfOamEfm 1}
dot3OamDescrEntry OBJECT-TYPE
SYNTAX Dot3OamDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to a single OAM EFM Descriptor (profile).
Each Descriptor contains a set of OAM EFM Link configuration
parameters. The configuration parameters are applied to the
OAM EFM Links referencing this Descriptor (see dot3OamXDescrId
object). Descriptors may be created/deleted using the row creation/deletion
mechanism via dot3OamDescrRowStatus. If an active entry is referenced
in dot3OamXDescrId, the entry MUST remain active until all references are removed."
INDEX { dot3OamDescrId }
::= { dot3OamDescrTable 1 }
Dot3OamDescrEntry ::= SEQUENCE {
dot3OamDescrId Unsigned32,
dot3OamDescrRowStatus RowStatus,
dot3OamDescrMode INTEGER,
dot3OamDescrLbRxOperation INTEGER,
dot3OamDescrRateLimit Unsigned32
}
dot3OamDescrId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is the unique index associated with this Descriptor (profile).
Entries in this table are referenced via the object dot3OamXDescrId
in dot3OamXEntry."
::= { dot3OamDescrEntry 1 }
dot3OamDescrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls creation/deletion of the associated entry in this table
per the semantics of RowStatus. If an active entry is referenced in
dot3OamXDescrId, the entry MUST remain active until all references are removed."
::= { dot3OamDescrEntry 2 }
dot3OamDescrMode OBJECT-TYPE
SYNTAX INTEGER {
passive(1),
active (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the mode of OAM operation for an Ethernet-like interface
referencing this Descriptor.
OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode.
These two modes differ in that active mode provides additional capabilities
to initiate monitoring activities with the remote OAM peer entity, while
passive mode generally waits for the peer to initiate OAM actions with it.
As an example, an active OAM entity can put the remote OAM entity in a
loopback state, where a passive OAM entity cannot."
::= { dot3OamDescrEntry 3 }
dot3OamDescrLbRxOperation OBJECT-TYPE
SYNTAX INTEGER {
ignore(1),
process(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Since OAM loopback is a disruptive operation (user traffic does not pass),
this object provides a mechanism to provide control: whether received OAM
loopback commands are processed or ignored, for the OAM Link referencing
this Descriptor.
When the value is ignore(1), received loopback commands are ignored.
When the value is process(2), received loopback commands are processed.
The default value is to ignore loopback commands (ignore(1))."
::= { dot3OamDescrEntry 4 }
dot3OamDescrRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines how many OAM frames can be sent per second (maximum)
for an OAM EFM Link referencing this Descriptor."
::= { dot3OamDescrEntry 5 }
dot3OamXTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3OamXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is an extension of dot3OamTable of standard DOT3-OAM-MIB."
::= { ethIfOamEfm 2 }
dot3OamXEntry OBJECT-TYPE
SYNTAX Dot3OamXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in dot3OamXTable."
AUGMENTS { dot3OamEntry }
::= { dot3OamXTable 1 }
Dot3OamXEntry ::= SEQUENCE {
dot3OamXDescrId Unsigned32,
dot3OamXPeerState INTEGER
}
dot3OamXDescrId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object points to an entry of dot3OamDescrTable (dot3OamDescrId),
which defines part of the configuration parameters for this OAM EFM Link.
As long as one of the OAM EFM Links refers an entry in the dot3OamDescrTable,
this entry cannot be removed.
When an OAM EFM Link supports this object (RW), the standard MIB objects of:
dot3OamMode (parallel to dot3OamDescrMode) and dot3OamLoopbackIgnoreRx
(parallel to dot3OamDescrLbRxOperation) will be supported by Agent RO.
Value 0 means that no entry of dot3OamDescrTable (dot3OamDescrId)is pointed by this object."
::= { dot3OamXEntry 1 }
dot3OamXPeerState OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
operational (2),
linkFault (3),
dyingGasp (4),
criticalEvent(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reports the state of the Peer of the OAM EFM Link.
unknown - at the initialization of the device, or after Reset, when
there is still no data about the peer's state.
operational - usually after unknown state, when device senses that
peer is OK.
linkFault - Loss of Signal is detected by the receiver.
dyingGasp - Unrecoverable condition has occurred (e.g power failure)
criticalEvent - Unspecified Critical Event has occured."
::= { dot3OamXEntry 2 }
ethIfMacLayer OBJECT IDENTIFIER ::= {ethIf 7}
ethIfMacLayerEvents OBJECT IDENTIFIER ::= { ethIfMacLayer 0 }
ethIfSrcMacCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfSrcMacCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports source MAC addresses control parameters per interface.
Source MAC control will be used mainly for security. Only packets with certain source MAC
Addresses will be allowed to access the device. The source MAC addresses can be static or learned.
The static addresses will be defined by the user in another table: ethIfSrcMacCtrlAddrTable.
The learned addresses will exist in the ethIfSrcMacCtrlAddrTable as well."
::= {ethIfMacLayer 1}
ethIfSrcMacCtrlEntry OBJECT-TYPE
SYNTAX EthIfSrcMacCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table."
INDEX { ethIfSrcMacCtrlIndex, ethIfSrcMacCtrlIdx2 }
::= { ethIfSrcMacCtrlTable 1 }
EthIfSrcMacCtrlEntry ::=
SEQUENCE {
ethIfSrcMacCtrlIndex Unsigned32,
ethIfSrcMacCtrlIdx2 Unsigned32,
ethIfSrcMacCtrl INTEGER,
ethIfSrcMacCtrlMaxPermitAddr Unsigned32,
ethIfSrcMacCtrlCurNumPermitAddr Unsigned32,
ethIfSrcMacCtrlFlushAddrCmd INTEGER,
ethIfSrcMacCtrlAging Unsigned32,
ethIfSrcMacCtrlLocking INTEGER,
ethIfSrcMacCtrlViolationAction INTEGER,
ethIfSrcMacCtrlLastViolatingAddr MacAddress,
ethIfSrcMacCtrlPortStatus INTEGER
}
ethIfSrcMacCtrlIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the MAC Layer interface supporting source MAC control feature.
It may be the ifIndex of the ETH/Bridge Port."
::= { ethIfSrcMacCtrlEntry 1 }
ethIfSrcMacCtrlIdx2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A second index that can be used. For example: The VLAN ID for which the source MAC
control feature is supported. When this index is not in use, its value will be: 9999."
::= { ethIfSrcMacCtrlEntry 2 }
ethIfSrcMacCtrl OBJECT-TYPE
SYNTAX INTEGER
{
disable (2),
enable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the source MAC control on the current interface.
The device should not enable source MAC control if for the current interface there
are more than ethIfSrcMacCtrlMaxPermitAddr addresses in the ethIfSrcMacCtrlAddrTable.
Default value will be: disable (2)."
::= { ethIfSrcMacCtrlEntry 3 }
ethIfSrcMacCtrlMaxPermitAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum number of permitted MAC addresses (static and learned) for the
current interface."
::= { ethIfSrcMacCtrlEntry 4 }
ethIfSrcMacCtrlCurNumPermitAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of source MAC addresses currently permitted for the
current interface."
::= { ethIfSrcMacCtrlEntry 5 }
ethIfSrcMacCtrlFlushAddrCmd OBJECT-TYPE
SYNTAX INTEGER
{
off (2),
on (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to on (3) this command will erase all the learned addresses and invalid
addresses of the selected interface in the ethIfSrcMacCtrlAddrTable.
After operation is finished, Agent will turn the value to 'off'."
::= { ethIfSrcMacCtrlEntry 6 }
ethIfSrcMacCtrlAging OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period in seconds for aging out dynamically learned source MAC addresses.
Valid Values:
0 - disable
10-1000000"
::= { ethIfSrcMacCtrlEntry 7 }
ethIfSrcMacCtrlLocking OBJECT-TYPE
SYNTAX INTEGER
{
unlock (2),
lock (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to lock (3) this command will lock the Source MAC Address learning.
No more learned addresses will be added to the ethIfSrcMacCtrlAddrTable.
When set to unlock (2) this command will unlock the Source MAC Address learning.
Learned addresses will be added to the ethIfSrcMacCtrlAddrTable but the number of
addresses in the table will not exceed ethIfSrcMacCtrlMaxPermitAddr.
Default value is: unlock (2)."
::= { ethIfSrcMacCtrlEntry 8 }
ethIfSrcMacCtrlViolationAction OBJECT-TYPE
SYNTAX INTEGER
{
drop (2),
dropNotify (3),
shutdown (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the action that the device will take upon security violation.
drop(2) - the violating packets will be dropped.
dropNotify (3)- the violating packets will be dropped and notifications
will be generated. Notifications may be for example:
SNMP Traps, Syslog messages and log file new entries.
shutdown (4) - the interface will be forced to shut down."
::= { ethIfSrcMacCtrlEntry 9 }
ethIfSrcMacCtrlLastViolatingAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the last MAC address that violated the security
on the current interface. If no violation, the agent will return:
00-00-00-00-00-00 ."
::= { ethIfSrcMacCtrlEntry 10 }
ethIfSrcMacCtrlPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
shutdown (2),
secureActive (3),
secureInactive (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the operational status of the MAC Control feature
on an interface.
shutdown(2) - This indicates that the port is shutdown due to security
violation.
secureActive (3) - This indicates that the MAC Control interface security
is operational and this interface is not shutdown due to
security violation.
secureInactive (4)- This indicates that the MAC Control is not operational."
::= { ethIfSrcMacCtrlEntry 11 }
ethIfSrcMacCtrlAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfSrcMacCtrlAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows which MAC Addresses are permitted when the source MAC control
is enabled and which non permitted MAC Addresses attempted to access the
current interface. It contains static source MAC Addresses as well as learned
MAC Addresses. The user can configure Static permitted source MAC Addresses via this table."
::= {ethIfMacLayer 2}
ethIfSrcMacCtrlAddrEntry OBJECT-TYPE
SYNTAX EthIfSrcMacCtrlAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table."
INDEX {ethIfSrcMacCtrlAddrIndex, ethIfSrcMacCtrlAddr, ethIfSrcMacCtrlAddrIdx3 }
::= { ethIfSrcMacCtrlAddrTable 1 }
EthIfSrcMacCtrlAddrEntry ::=
SEQUENCE {
ethIfSrcMacCtrlAddrIndex Unsigned32,
ethIfSrcMacCtrlAddr MacAddress,
ethIfSrcMacCtrlAddrIdx3 Unsigned32,
ethIfSrcMacCtrlAddrRowStatus INTEGER,
ethIfSrcMacCtrlAddrStatus INTEGER
}
ethIfSrcMacCtrlAddrIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the interface for which the source MAC addresses exist in this table.
It may be the ifIndex of the ETH/Bridge Port."
::= { ethIfSrcMacCtrlAddrEntry 1 }
ethIfSrcMacCtrlAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast source MAC address that was learned or statically configured for the current
interface. Packets with this source MAC address will be accepted by the device."
::= { ethIfSrcMacCtrlAddrEntry 2 }
ethIfSrcMacCtrlAddrIdx3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A third index that can be used. For example: The VLAN ID for which the source MAC control
feature is supported. When this index is not in use, its value will be: 9999."
::= { ethIfSrcMacCtrlAddrEntry 3 }
ethIfSrcMacCtrlAddrRowStatus OBJECT-TYPE
SYNTAX INTEGER
{ active (1),
createAndGo (4),
destroy (6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object will be used in order to create/delete a static row
or delete an address that is not allowed to access the current interface
(ethIfSrcMacCtrlAddrStatus= invalid(2)).
Device will add the learned addresses to this table.
It will not be possible to add a new static entry to this table while the
number of existing rows is equal or more than ethIfSrcMacCtrlMaxPermitAddr.
When ethIfSrcMacCtrl = enabled (3), the device will add learned entries only
up to ethIfSrcMacCtrlMaxPermitAddr."
::= { ethIfSrcMacCtrlAddrEntry 4 }
ethIfSrcMacCtrlAddrStatus OBJECT-TYPE
SYNTAX INTEGER
{
invalid (2),
learned(3),
mgmt(5) -- static
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this entry. The meanings of the values are:
invalid (2) - the current address is not allowed to access this interface.
learned(3) - the current address was learned.
mgmt (5) - the current address is static. It may exist in the MAC Table."
::= { ethIfSrcMacCtrlAddrEntry 5 }
-- ethIfMacLayerNotifications
ethIfMacAccessViolation NOTIFICATION-TYPE
OBJECTS {ifDescr, ethIfSrcMacCtrlLastViolatingAddr}
STATUS current
DESCRIPTION
"This trap indicates that an Access Violation occurred."
::= { ethIfMacLayerEvents 1 }
--***************************************
-- Ethernet definitions on device level
--***************************************
ethIfSysConfig OBJECT IDENTIFIER ::= { ethIf 11 }
-- List of Valid Ethernet Types at system level
ethIfSysValidEtherTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthIfSysValidEtherTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains list of valid VLAN Tag Ethertype codes
that may be used in port and flow configuration. The table
is used by devices that can process limited number of the
Ethertype codes, e.g. due to HW limitations. Configuration
of other Ethernet code fields should perform sanity check in
order to allow only Ethertype codes that the table contains."
::= { ethIfSysConfig 1 }
ethIfSysValidEtherTypeEntry OBJECT-TYPE
SYNTAX EthIfSysValidEtherTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Ethertype table. Each entry contains one
valid Ethernet code."
INDEX { ethIfSysValidEtherTypeIdx }
::= { ethIfSysValidEtherTypeTable 1 }
EthIfSysValidEtherTypeEntry ::= SEQUENCE {
ethIfSysValidEtherTypeIdx Unsigned32,
ethIfSysValidEtherTypeRowStatus RowStatus,
ethIfSysValidEtherTypeCode Unsigned32
}
ethIfSysValidEtherTypeIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a running index of the configuration table."
::= { ethIfSysValidEtherTypeEntry 1 }
ethIfSysValidEtherTypeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables creation and deletion of entries
in the ethIfSysValidEtherTypeTable."
::= { ethIfSysValidEtherTypeEntry 2 }
ethIfSysValidEtherTypeCode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The valid Ethertype code.
See standards.ieee.org/regauth/ethertype/eth.txt for codes."
::= { ethIfSysValidEtherTypeEntry 3 }
-----------------------------------
-- Ethernet Common Trap Definitions
-----------------------------------
-- LOSS OF SIGNAL (LOS)
ethLos NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias }
STATUS current
DESCRIPTION
"This trap indicates that a Loss of signal was detected on an ethernet interface.
"
::= { ethIfEvents 1 }
-- ETHERNET RING PROTECTION (ERP) STATE CHANGE
erpStateProtected NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
erpDescr }
STATUS current
DESCRIPTION
"This trap indicates that ERP ring state changed to protected.
"
::= { ethIfEvents 4 }
erpPortStateChange NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
erpPortDescr, erpPortState }
STATUS current
DESCRIPTION
"This trap indicates that the Port State was changed.
"
::= { ethIfEvents 5 }
oamEfmRemoteLoopback NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias, dot3OamLoopbackStatus, dot3OamLoopbackIgnoreRx }
STATUS current
DESCRIPTION
"This trap indicates that Loopback started.
"
::= { ethIfEvents 17}
oamEfmRemoteLoopbackOff NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias }
STATUS current
DESCRIPTION
"This trap indicates that Loopback ended.
"
::= { ethIfEvents 19}
oamEfmLinkFaultIndication NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias }
STATUS current
DESCRIPTION
"This trap indicates Link fault indication.
"
::= { ethIfEvents 20}
oamEfmFeLinkFaultIndication NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias }
STATUS current
DESCRIPTION
"This trap indicates Link fault indication at Far End.
"
::= { ethIfEvents 21}
oamEfmCriticalLinkIndication NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias }
STATUS current
DESCRIPTION
"This trap indicates Critical link indication.
"
::= { ethIfEvents 22}
oamEfmFeCriticalLinkIndication NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias }
STATUS current
DESCRIPTION
"This trap indicates Critical link indication at Far End.
"
::= { ethIfEvents 23}
oamEfmDyingGaspIndication NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias }
STATUS current
DESCRIPTION
"This trap indicates Dying gasp indication.
"
::= { ethIfEvents 24}
oamEfmFeDyingGaspIndication NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias }
STATUS current
DESCRIPTION
"This trap indicates Dying gasp indication at Far End.
"
::= { ethIfEvents 25}
pcsLinkDown NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ifAlias }
STATUS current
DESCRIPTION
"This trap indicates that the PCS Link is down.
"
::= { ethIfEvents 26 }
END
View Git Blame Copy Permalink