WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/rad/RAD-BrgGen-MIB

4097 lines
127 KiB
Plaintext
Raw Blame History

RAD-BrgGen-MIB DEFINITIONS ::= BEGIN
-- It is RAD's intent to encourage the widespread use of
-- this Specification in connection with the management of
-- RAD products. RAD grants vendors, end-users,
-- and other interested parties a non-exclusive license to
-- use this Specification in connection with the management
-- of RAD products.
-- This Specification is supplied "as is," and RAD makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
IMPORTS
InterfaceIndex FROM IF-MIB
Timeout, BridgeId, dot1dBasePortEntry FROM BRIDGE-MIB
ieee8021BridgeBaseComponentId, ieee8021BridgeBaseEntry, ieee8021BridgeBasePortEntry FROM IEEE8021-BRIDGE-MIB
ieee8021QBridgeVlanStaticEntry FROM IEEE8021-Q-BRIDGE-MIB
VlanId, PortList, dot1qVlanStaticEntry FROM Q-BRIDGE-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
Integer32, Counter32, TimeTicks,
IpAddress, Gauge32, Unsigned32,
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus,
MacAddress, RowPointer FROM SNMPv2-TC
radBridges FROM RAD-SMI-MIB
IEEE8021VlanIndex, IEEE8021PbbComponentIdentifier, IEEE8021BridgePortNumber FROM IEEE8021-TC-MIB
TimeFilter FROM RMON2-MIB
ieee8021MstpEntry, ieee8021MstpDesignatedRoot, ieee8021MstpTopologyChanges FROM IEEE8021-MSTP-MIB
alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason FROM RAD-GEN-MIB;
genBridge MODULE-IDENTITY
LAST-UPDATED "201508201800Z" -- August 20, 2015
ORGANIZATION "RAD Data Communications Ltd."
CONTACT-INFO
"System Department
Email: mibs@rad.com
Postal: RAD Data Communications Ltd.
24 Raoul Wallenberg St.
Tel-Aviv 6971920
Israel
Phone: +972-3-645-5421
Fax: +972-3-760-7844"
DESCRIPTION
"General Bridge MIB."
::= { radBridges 1 }
genBridgeEvents OBJECT IDENTIFIER ::= {radBridges 0 }
-- Spanning Tree Root Selection
bridgeSpanningTreeNewRoot NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ieee8021BridgeBaseXName }
STATUS current
DESCRIPTION
"This Trap indicates Bridge was elected as spanning tree root.
"
::= { genBridgeEvents 1 }
-- Spanning Tree Topology Change
bridgeSpanningTreeTopologyChange NOTIFICATION-TYPE
OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription,
alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason,
ieee8021BridgeBaseXName }
STATUS current
DESCRIPTION
"This Trap indicates a Spanning Tree Topology change.
"
::= { genBridgeEvents 2 }
-- At the end of the MIB there is a definition of all RAD general traps for bridges.
-- Textual conventions
TagHandlingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TEXTUAL CONVENTION defines VLAN Tag process type.
It is mainly for use with Double Tagging."
SYNTAX INTEGER
{
none (2),
stacking (3),
stripping (4)
}
BridgeTopology ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TEXTUAL CONVENTION defines the topology of the bridge."
SYNTAX INTEGER
{
notApplicable (1),
eLAN (3),
eTree (4)
}
radBridgeAction OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
sendNetworkTab(2),
deleteNetworkTab(3),
sendRoutingTab(4), -- Level II
deleteRoutinTab(5),
sendLanTab(6),
deleteLanTab(7),
deleteArpTab(8),
sendArpTab(9),
deleteRouteTab(10), -- Level III
sendRouteTab(11),
deactivateAllMasks(12),
saveAllActiveMasks(13),
loadAndActivateAllMasksFromNVRAM(14),
clearAllMasksFromNVRAM(15),
defaultConfig(16),
resetNVRAM(17),
clearIPNVRAM(18),
noOp(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable enables the operator to perform one of the
specified actions on the tables maintained by the network device.
Send actions are not currently implemented. Not all actions can
be performed on all bridges."
::= { genBridge 1 }
radBridgeInactiveArpTimeOut OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines the maximum time period that can pass
between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table."
::= { genBridge 2 }
-- radBridgeMaskTab defines the format of RAD Bridge OLD masking tables
radBridgeMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mask tables enable definition of forwarding restrictions and
control of message flow in the internetwork. Each entry
in this table defines a mask statement consisting of up to
three mask definitions and an action defined by
radBridgeMaskOper. Different types of mask entries are supported,
as defined by radBridgeMaskType."
::= { genBridge 3 }
radBridgeMaskEntry OBJECT-TYPE
SYNTAX RadBridgeMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in table radBridgeMaskTable."
INDEX { radBridgeMaskType, radBridgeMaskIfIndex, radBridgeMaskNum }
::= { radBridgeMaskTable 1 }
RadBridgeMaskEntry ::= SEQUENCE {
radBridgeMaskType
INTEGER,
radBridgeMaskIfIndex
Integer32,
radBridgeMaskNum
Integer32,
radBridgeMaskDest
INTEGER,
radBridgeMaskPat1
OCTET STRING,
radBridgeMaskActiveBit1
OCTET STRING,
radBridgeMaskFrom1
INTEGER,
radBridgeMaskOffset1
Integer32,
radBridgeMaskCond1
INTEGER,
radBridgeMaskPat2
OCTET STRING,
radBridgeMaskActiveBit2
OCTET STRING,
radBridgeMaskFrom2
INTEGER,
radBridgeMaskOffset2
Integer32,
radBridgeMaskCond2
INTEGER,
radBridgeMaskPat3
OCTET STRING,
radBridgeMaskActiveBit3
OCTET STRING,
radBridgeMaskFrom3
INTEGER,
radBridgeMaskOffset3
Integer32,
radBridgeMaskCond3
INTEGER,
radBridgeMaskOper
INTEGER
}
radBridgeMaskType OBJECT-TYPE
SYNTAX INTEGER {
tx(1),
rx(2),
compress(3),
priority(4),
loadSharing(5),
facs(6),
codConnect(7),
codDisconnect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines the type of mask entry."
::= { radBridgeMaskEntry 1 }
radBridgeMaskIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the if Index of the interface to which the mask is applied."
::= { radBridgeMaskEntry 2 }
radBridgeMaskNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mask entry number, defined by its line number in the mask
table."
::= { radBridgeMaskEntry 3 }
radBridgeMaskDest OBJECT-TYPE
SYNTAX INTEGER {
unassigned-cond (1),
broadcast-msge (2),
multicast-msge (3),
all-msge(4),
none(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the type of destination address carried by the frame
to which the mask will be applied. Unassigned-condition
deactivates the mask entry."
::= { radBridgeMaskEntry 4 }
radBridgeMaskPat1 OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern."
::= { radBridgeMaskEntry 5 }
radBridgeMaskActiveBit1 OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat1 field."
::= { radBridgeMaskEntry 6 }
radBridgeMaskFrom1 OBJECT-TYPE
SYNTAX INTEGER {
mac(1),
llc(2),
net(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Offset base of radBridgeMaskPat1 within the frame.
Net can be in some cases the data start point."
::= { radBridgeMaskEntry 7 }
radBridgeMaskOffset1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the radBridgeMaskPat1 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm1.The mask offset is an even
decimal number in the range of 0 to 1518."
::= { radBridgeMaskEntry 8 }
radBridgeMaskCond1 OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
radBridgeMaskOffset1 the packet contains data that matches
the content of radBridgeMaskPat1.
false - Condition is valid if at the position specified by
radBridgeMaskOffset1 the packet contains data that does not
match the content of radBridgeMaskPat1."
::= { radBridgeMaskEntry 9 }
radBridgeMaskPat2 OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern."
::= { radBridgeMaskEntry 10 }
radBridgeMaskActiveBit2 OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat2 field."
::= { radBridgeMaskEntry 11 }
radBridgeMaskFrom2 OBJECT-TYPE
SYNTAX INTEGER {
mac (1),
llc (2),
net(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Offset base of radBridgeMaskPat2 within the frame.
Net can be in some cases the data start point."
::= { radBridgeMaskEntry 12 }
radBridgeMaskOffset2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the radBridgeMaskPat2 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm2.The mask offset is an even
decimal number in the range of 0 to 1518."
::= { radBridgeMaskEntry 13 }
radBridgeMaskCond2 OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
radBridgeMaskOffset2 the packet contains data that matches
the content of radBridgeMaskPat2.
false - Condition is valid if at the position specified by
radBridgeMaskOffset2 the packet contains data that does not
match the content of radBridgeMaskPat2."
::= { radBridgeMaskEntry 14 }
radBridgeMaskPat3 OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern."
::= { radBridgeMaskEntry 15 }
radBridgeMaskActiveBit3 OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat3 field."
::= { radBridgeMaskEntry 16 }
radBridgeMaskFrom3 OBJECT-TYPE
SYNTAX INTEGER {
mac (1),
llc (2),
net (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Offset base of radBridgeMaskPat3 within the frame.
Net can be in some cases the data start point."
::= { radBridgeMaskEntry 17 }
radBridgeMaskOffset3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the radBridgeMaskPat3 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm3. The mask offset is an even
decimal number in the range of 0 to 1518."
::= { radBridgeMaskEntry 18 }
radBridgeMaskCond3 OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
radBridgeMaskOffset3 the packet contains data that matches
the content of radBridgeMaskPat3
false - Condition is valid if at the position specified by
radBridgeMaskOffset3 the packet contains data that does not
match the content of radBridgeMaskPat3."
::= { radBridgeMaskEntry 19 }
radBridgeMaskOper OBJECT-TYPE
SYNTAX INTEGER {
block (1),
forward (2),
route (3),
forward-route (4),
high-priority (5),
noOp(6),
delete(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of action to be taken if the frame meets the
conditions of the mask.
noOp = disabled (mask remains on list, but is not active)
delete = mask is removed from the list. "
::= { radBridgeMaskEntry 20 }
radBridgeCOD OBJECT IDENTIFIER ::= {genBridge 4 }
radBridgeCODParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeCODEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of COD parameters "
::= { radBridgeCOD 1}
radBridgeCODEntry OBJECT-TYPE
SYNTAX RadBridgeCODEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each radBridgeCODEntry consists of the following parameters"
INDEX {radBridgeCODIfIndex}
::= { radBridgeCODParamTable 1 }
RadBridgeCODEntry ::= SEQUENCE {
radBridgeCODIfIndex
Integer32,
radBridgeCODManualConnect
INTEGER,
radBridgeCODMode
INTEGER,
radBridgeCODConnectDelay
Integer32,
radBridgeCODisConnectDelay
Integer32,
radBridgeCODImplicitSwitch
INTEGER,
radBridgeCODNumAccess
Counter32,
radBridgeCODTotalConnecTime
Integer32
}
radBridgeCODIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface to which this COD entry is applicable."
::= { radBridgeCODEntry 1 }
radBridgeCODManualConnect OBJECT-TYPE
SYNTAX INTEGER {
connect(1),
disconnect(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management station can start connection manually
by setting this parameter"
::= { radBridgeCODEntry 2 }
radBridgeCODMode OBJECT-TYPE
SYNTAX INTEGER {
answer(1),
originate(2),
disable(3),
answerAndOriginate(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In answer mode only one incoming call may be accepted at a time. Other nodes
attempting to access the local modem will receive a busy signal until the
connection is terminated. (Answer mode has no difficulty supporting multiple
remote connections to one local port, as blocking multiple incoming calls is
just a modem function. Originate mode, on the other
hand will only support a single local port to remote port connection).
The disable parameter disables the COD utility for this interface.
Choosing any other mode will enable the COD utility."
::= { radBridgeCODEntry 3 }
radBridgeCODConnectDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The connect delay defines the minimum time period that
the link must stay disconnected, between 2 succesive
connections (in seconds)."
::= { radBridgeCODEntry 4 }
radBridgeCODisConnectDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The disconnect delay defines the minimum time period
the link must stay connected, between 2 succesive
disconnections (in seconds)."
::= { radBridgeCODEntry 5 }
radBridgeCODImplicitSwitch OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inplicit switch allows the user to ignore implicit triggers provided
by the COD software."
-- DEFVAL { 1 }
::= { radBridgeCODEntry 6 }
radBridgeCODNumAccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful connections that have been established since
the COD has been reset."
::= { radBridgeCODEntry 7}
radBridgeCODTotalConnecTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all the connect time intervals since the COD was reset."
::= { radBridgeCODEntry 8}
radBridgeCODTimeTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeCODTimeTriggerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of COD parameters "
::= { radBridgeCOD 2 }
radBridgeCODTimeTriggerEntry OBJECT-TYPE
SYNTAX RadBridgeCODTimeTriggerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each radBridgeCODTimeTriggerEntry consists of the following parameters"
INDEX { radBridgeCODTimeIfIndex, radBridgeCODDay, radBridgeCODTimeTriggerNum }
::= { radBridgeCODTimeTriggerTable 1 }
RadBridgeCODTimeTriggerEntry ::= SEQUENCE {
radBridgeCODTimeIfIndex
Integer32,
radBridgeCODDay
INTEGER,
radBridgeCODTimeTriggerNum
Integer32,
radBridgeCODTimeTriggerFrom
DisplayString,
radBridgeCODTimeTriggerTo
DisplayString,
radBridgeCODTimeTriggerStatus
INTEGER
}
radBridgeCODTimeIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface to which this COD Time Trigger entry is applicable."
::= { radBridgeCODTimeTriggerEntry 1}
radBridgeCODDay OBJECT-TYPE
SYNTAX INTEGER {
mon(1),
tue(2),
wed(3),
thu(4),
fri(5),
sat(6),
sun(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The day of the week in which the dial up connection operates."
::= { radBridgeCODTimeTriggerEntry 2 }
radBridgeCODTimeTriggerNum OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Every day of the week the user can configure 3 dial up connections."
::= { radBridgeCODTimeTriggerEntry 3 }
radBridgeCODTimeTriggerFrom OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time to start Dial Up connection, in format hh:mm."
::= {radBridgeCODTimeTriggerEntry 4 }
radBridgeCODTimeTriggerTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time to terminate Dial Up connection, in format HH:MM."
::= {radBridgeCODTimeTriggerEntry 5 }
radBridgeCODTimeTriggerStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of a table entry."
::= { radBridgeCODTimeTriggerEntry 6 }
radBridgeCODTraffic OBJECT IDENTIFIER ::= { radBridgeCOD 3}
radBridgeCODTrafficTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeCODTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of COD Traffic trigger "
::= { radBridgeCODTraffic 1 }
radBridgeCODTrafficEntry OBJECT-TYPE
SYNTAX RadBridgeCODTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each radBridgeCODTrafficEntry consists of the following parameters."
INDEX {radBridgeCODProtocolType}
::= { radBridgeCODTrafficTable 1}
RadBridgeCODTrafficEntry ::= SEQUENCE {
radBridgeCODProtocolType
INTEGER,
radBridgeCODTrafficTriggerStatus
INTEGER }
radBridgeCODProtocolType OBJECT-TYPE
SYNTAX INTEGER {
ip(1),
ipx(2),
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Protocol Type of the Traffic Table"
::= { radBridgeCODTrafficEntry 1 }
radBridgeCODTrafficTriggerStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command of Status of the Protocol Traffic Trigger"
::= { radBridgeCODTrafficEntry 2 }
radBridgeCODRemoteIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the Remote IP Address"
::= { radBridgeCODTraffic 2 }
radBridgeCODIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the Mask of the Remote IP Address"
::= { radBridgeCODTraffic 3 }
radBridgeCODTrafficTriggerProtType OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Protocol Type for the User Defined Protocol Traffic Trigger (3)."
::= { radBridgeCODTraffic 4 }
--COD Condition table
radBridgeCODCondTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeCODCondEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of COD Condition parameters "
::= { radBridgeCOD 4}
radBridgeCODCondEntry OBJECT-TYPE
SYNTAX RadBridgeCODCondEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each radBridgeCODCondEntry consists of the following parameters"
INDEX {radBridgeCODCondIfIndex}
::= { radBridgeCODCondTable 1 }
RadBridgeCODCondEntry ::= SEQUENCE {
radBridgeCODCondIfIndex
Integer32,
radBridgeCODOriginateConnectCondition
INTEGER,
radBridgeCODOriginateDisConnectCondition
INTEGER,
radBridgeCODOriginateDisConnectDelay
Integer32,
radBridgeCODAnswerConnectCondition
INTEGER,
radBridgeCODSpecificOnTrafficOIDCondition
OBJECT IDENTIFIER,
radBridgeCODDisConnectMinimunFramesNumber
Integer32
}
radBridgeCODCondIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface, this COD entry is applicable to."
::= { radBridgeCODCondEntry 1 }
radBridgeCODOriginateConnectCondition OBJECT-TYPE
SYNTAX INTEGER {
onPowerOn (1),
whenAnyStationOnLan (2),
onTraffic (3),
onManualConnect (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This condition, allows the user to specify the
condition under which the link is connected.
The options are
onPowerOn - On power on.
whenAnyStationOnLan - When any station on lan.
onTraffic - On traffic. The user can specify the
condition/s for connection.
The connection will be defined in
CODSpecificOnTrafficConditionOID .
onManualConnect - depends on radBridgeCODManualConnect
OBJECT-TYPE (=connect).
"
::= { radBridgeCODCondEntry 2 }
radBridgeCODOriginateDisConnectCondition OBJECT-TYPE
SYNTAX INTEGER {
noStationOnLan (1),
onTraffic (2),
onDelayFromConnectionOnRequest (3),
onManualDisConnect (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This condition allows the user to specify the
condition under which the link is disconnected.
The options are:
noStationOnLan - When there is no station on lan.
Counts 15 minutes from the point the last
frame from lan has been received. If no
frame have been transmitted on lan by the
end of this period, disconnect the connection.
onTraffic - On traffic. The user can specify the
condition/s for disconnection.
The disconnection will be defined in
CODSpecificOnTrafficConditionOID .
onDelayFromConnectionOnRequest -
On Delay From Connection On Request .
The delay time period will be defined in
CODOriginateDisConnectDelay .
onManualDisConnect - depends on radBridgeCODManualConnect
OBJECT-TYPE (=disconnect).
"
::= { radBridgeCODCondEntry 3 }
radBridgeCODOriginateDisConnectDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delay time in seconds. "
::= { radBridgeCODCondEntry 4 }
radBridgeCODAnswerConnectCondition OBJECT-TYPE
SYNTAX INTEGER {
onPowerOn (1),
whenAnyStationOnLan (2),
onTraffic (3),
onManualConnect (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CODCondAnswerConnect allows the user to specify
the condition under which the link is connected.
The options are:
onPowerOn - On power on.
whenAnyStationOnLan - When any station on lan.
onTraffic - On traffic. The user can specify the
condition/s for connection.
The connection will be defined in
CODSpecificOnTrafficConditionOID .
onManualConnect - depends on radBridgeCODManualConnect
OBJECT-TYPE .
"
::= { radBridgeCODCondEntry 5 }
radBridgeCODSpecificOnTrafficOIDCondition OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A reference to a specific entry in the
radBridgeMaskTable, which describes the
particular COD condition .
If Connect or Disconnect Conditions are not
onTraffic, its value should be set to the
OBJECT IDENTIFIER { 0 0 }. "
::= { radBridgeCODCondEntry 6 }
radBridgeCODDisConnectMinimunFramesNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frames rate."
::= { radBridgeCODCondEntry 7 }
--The IPX following objects define the Spoofing
radBridgeIPX OBJECT IDENTIFIER ::= {genBridge 5 }
radBridgeIPXdriver OBJECT IDENTIFIER ::= {radBridgeIPX 1 }
radBridgeIPXRip OBJECT IDENTIFIER ::= {radBridgeIPX 2 }
radBridgeIPXSap OBJECT IDENTIFIER ::= {radBridgeIPX 3 }
radBridgeIPXForwarding OBJECT-TYPE
SYNTAX INTEGER {
forwarding(1),
not-forwarding(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The indication of whether this entity is acting as an IPX
gateway in respect to the forwarding of datagrams received by,
but not addressed to, this entity. IPX gateways forward
datagrams. IPX hosts do not. Note that changing this parameter
requiers RESET of the router."
-- DEFVAL { 1 }
::= { radBridgeIPXdriver 1 }
radBridgeIPXRipOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets transmitted by RIP."
::= { radBridgeIPXRip 1 }
radBridgeIPXRipInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by RIP. This will include
any packets that are subsequently discarded."
::= { radBridgeIPXRip 2 }
radBridgeIPXRipInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets discarded by RIP."
::= { radBridgeIPXRip 3 }
radBridgeIPXRipTblNoOfEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max number of entries that exist in the RIP routing table."
::= { radBridgeIPXRip 4 }
radBridgeIPXRipTblBcastTrigUpdateInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default time interval (in seconds)between triggered RIP updates on
a broadcast type interface. A triggered update occurs when a change is
detected in the routing database. This time interval delays the
broadcasting of these updates so that changes on the network will
not result in a lot of triggered updates."
::= { radBridgeIPXRip 5 }
radBridgeIPXRipTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeIPXRipTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The routing table used by RIP to calculate routes to remote
desination networks."
::= { radBridgeIPXRip 6 }
radBridgeIPXRipTableEntry OBJECT-TYPE
SYNTAX RadBridgeIPXRipTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The routing information for one of this entity's destination networks."
INDEX { radBridgeIPXRipDestNetwork,
radBridgeIPXRipPolicy }
::= { radBridgeIPXRipTable 1 }
RadBridgeIPXRipTableEntry ::= SEQUENCE {
radBridgeIPXRipDestNetwork
OCTET STRING,
radBridgeIPXRipPolicy
INTEGER,
radBridgeIPXRipForwardingRouter
OCTET STRING,
radBridgeIPXRipNIC
Integer32,
radBridgeIPXRipTickMetric
Integer32,
radBridgeIPXRipHopMetric
Integer32,
radBridgeIPXRipAgingTime
TimeTicks,
radBridgeIPXRipValueStatus
INTEGER,
radBridgeIPXRipForwardType
INTEGER
}
radBridgeIPXRipDestNetwork OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination network address to which this entry's
routing information pertains."
::= {radBridgeIPXRipTableEntry 1 }
radBridgeIPXRipPolicy OBJECT-TYPE
SYNTAX INTEGER {
main(1),
alternate(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value specifying the precidence of the route. A value of
zero means that the route is the best route, a value of one
means that the route is the second best route and so on."
::= { radBridgeIPXRipTableEntry 2 }
radBridgeIPXRipForwardingRouter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPX node address of the next hop (router) for the
entry's associated destination network."
::= { radBridgeIPXRipTableEntry 3 }
radBridgeIPXRipNIC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An interface identifier specifying what IPX interface the
next hop can be found on."
::= { radBridgeIPXRipTableEntry 4 }
radBridgeIPXRipTickMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The metric, in terms of transit time, associated with the route
given by the entry. This time is in terms of 1/18ths of a
second."
::= { radBridgeIPXRipTableEntry 5 }
radBridgeIPXRipHopMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The metric, in terms of distance , associated with the route
given by the entry."
::= { radBridgeIPXRipTableEntry 6 }
radBridgeIPXRipAgingTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time that the entry was updated. The time will be
provided in terms of the MIB-I object sysUpTime."
::= {radBridgeIPXRipTableEntry 7 }
radBridgeIPXRipValueStatus OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2),
invalid(3),
semiDynamic(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The entry status value; whether the entry is permanent (added
statically), reachable or unreachable. In the latter two cases
it would be added by RIP. A semiDynamic entry is an entry
enterd manualy by the user and can be updated by the router."
::= { radBridgeIPXRipTableEntry 8 }
radBridgeIPXRipForwardType OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- not specified by this MIB
local (2), -- local interface
remote (3) -- remote destination
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of route. Note that local(2) refers to a route for which the
next hop is the final destination; remote(3) refers to a route
for which the next hop is not the final destination."
::= {radBridgeIPXRipTableEntry 9 }
radBridgeIPXRipInfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeIPXRipInfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RIP interface table."
::= { radBridgeIPXRip 7 }
radBridgeIPXRipInfEntry OBJECT-TYPE
SYNTAX RadBridgeIPXRipInfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to one ifindex."
INDEX { radBridgeIPXRipInfIfIndex}
::= { radBridgeIPXRipInfTable 1 }
RadBridgeIPXRipInfEntry ::= SEQUENCE {
radBridgeIPXRipInfIfIndex
Integer32,
radBridgeIPXRipInfBcastUpdate
Integer32,
radBridgeIPXRipInfAgeMultiplier
Integer32
}
radBridgeIPXRipInfIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value of Ifindex is same as radBridgeIPXIfIndex in the
IPX Interface Table."
::= { radBridgeIPXRipInfEntry 1 }
radBridgeIPXRipInfBcastUpdate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RIP periodic update interval, in seconds. Zero value
corresponds to infinite interval."
-- DEFVAL {60}
::= { radBridgeIPXRipInfEntry 2 }
radBridgeIPXRipInfAgeMultiplier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The holding multiplier for information received in RIP
periodic updates. Zero value corresponds to infinite aging time."
-- DEFVAL {3}
::= { radBridgeIPXRipInfEntry 3 }
radBridgeIPXSapOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets transmitted by SAP."
::= { radBridgeIPXSap 1 }
radBridgeIPXSapInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by SAP. This will include
any packets that are subsequently discarded."
::= { radBridgeIPXSap 2 }
radBridgeIPXSapInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets discarded by SAP."
::= { radBridgeIPXSap 3 }
radBridgeIPXSapTblNoOfEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max number of entries that exist in the SAP Server
Information table."
::= { radBridgeIPXSap 4 }
radBridgeIPXSapTblBcastTrigUpdateInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default time interval (in seconds) between triggered SAP updates on a
broadcast style interface. A triggered update occurs when a
change is detected in the service database. This time interval
delays the transmission of these updates so that changes on the
network will not result in a lot of triggered updates."
::= { radBridgeIPXSap 5 }
radBridgeIPXSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeIPXSapTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Server Information table is used by SAP to store information
of services which are available on the internetwork."
::= { radBridgeIPXSap 6 }
radBridgeIPXSapTableEntry OBJECT-TYPE
SYNTAX RadBridgeIPXSapTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The server information for one of this entity's server entries."
INDEX { radBridgeIPXSapServerType,
radBridgeIPXSapName }
::= { radBridgeIPXSapTable 1 }
RadBridgeIPXSapTableEntry ::= SEQUENCE {
radBridgeIPXSapServerType
Integer32,
radBridgeIPXSapName
DisplayString,
radBridgeIPXSapNetwork
OCTET STRING,
radBridgeIPXSapNode
OCTET STRING,
radBridgeIPXSapSocket
Integer32,
radBridgeIPXSapHopsToServer
Integer32,
radBridgeIPXSapNIC
Integer32,
radBridgeIPXSapAgingTime
TimeTicks,
radBridgeIPXSapStatus
INTEGER
}
radBridgeIPXSapServerType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the server for which this entry pertains."
::= { radBridgeIPXSapTableEntry 1 }
radBridgeIPXSapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the server for which this entry pertains."
::= { radBridgeIPXSapTableEntry 2 }
radBridgeIPXSapNetwork OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPX network address of the host on which this server exists."
::= { radBridgeIPXSapTableEntry 3 }
radBridgeIPXSapNode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPX node address of the host on which this server exists."
::= { radBridgeIPXSapTableEntry 4 }
radBridgeIPXSapSocket OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPX socket number that is being used by the server to
which this entry pertains."
::= { radBridgeIPXSapTableEntry 5 }
radBridgeIPXSapHopsToServer OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of hops to the entity on which this server exists."
::= { radBridgeIPXSapTableEntry 6 }
radBridgeIPXSapNIC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Network Interface Card identifier specifying what IPX
interface the next hop can be found on."
::= { radBridgeIPXSapTableEntry 7 }
radBridgeIPXSapAgingTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time that the entry was updated. The time will be
provided in terms of the MIB-I object sysUpTime."
::= { radBridgeIPXSapTableEntry 8 }
radBridgeIPXSapStatus OBJECT-TYPE
SYNTAX INTEGER {
permanent(1),
dynamic(2),
invalid(3),
semiDynamic(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry."
::= { radBridgeIPXSapTableEntry 9 }
radBridgeIPXSapInfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeIPXSapInfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Sap interface table."
::= { radBridgeIPXSap 7 }
radBridgeIPXSapInfEntry OBJECT-TYPE
SYNTAX RadBridgeIPXSapInfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to one ifindex."
INDEX {radBridgeIPXSapInfIfIndex}
::= { radBridgeIPXSapInfTable 1 }
RadBridgeIPXSapInfEntry ::= SEQUENCE {
radBridgeIPXSapInfIfIndex
Integer32,
radBridgeIPXSapInfBcastUpdate
Integer32,
radBridgeIPXSapInfAgeMultiplier
Integer32
}
radBridgeIPXSapInfIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value of Ifindex is same as radBridgeIPXIfIndex in the
IPX Interface Table."
::= { radBridgeIPXSapInfEntry 1 }
radBridgeIPXSapInfBcastUpdate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SAP periodic update interval, in seconds. Zero value
corresponds to infinite interval."
-- DEFVAL {60}
::= { radBridgeIPXSapInfEntry 2 }
radBridgeIPXSapInfAgeMultiplier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The holding multiplier for information received in SAP
periodic updates. Zero value corresponds to infinite aging time."
-- DEFVAL {3}
::= { radBridgeIPXSapInfEntry 3 }
-- radMaskingTab defines the new format of RAD Bridge masking tables
GenAddress ::= OCTET STRING (SIZE(12))
newMasking OBJECT IDENTIFIER ::= {genBridge 6 }
maskingMaxEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the masking table."
::= { newMasking 1 }
maskingCurrentEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the mask table."
::= { newMasking 2 }
maskingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MaskingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the new masking scheme.
Mask tables enable definition of forwarding restrictions and
control of message flow in the internetwork. Each entry
in this table defines a mask statement and an action defined by
maskingOperation."
::= { newMasking 3 }
maskingEntry OBJECT-TYPE
SYNTAX MaskingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the contents of each line in the mask table."
INDEX { maskingType, maskingIfIndex, maskingIndex }
::= { maskingTable 1 }
MaskingEntry ::= SEQUENCE {
maskingType
INTEGER,
maskingIfIndex
Integer32,
maskingIndex
Integer32,
maskingProtocolType
INTEGER,
maskingSmartMaskOID
OBJECT IDENTIFIER,
maskingFrameType
INTEGER,
maskingFrameTypeCondition
INTEGER,
maskingSourceAddress
GenAddress,
maskingSourceActiveBits
GenAddress,
maskingSourceMacOrNet
INTEGER,
maskingSourceCondition
INTEGER,
maskingDestAddress
GenAddress,
maskingDestActiveBits
GenAddress,
maskingDestMacOrNet
INTEGER,
maskingDestCondition
INTEGER,
maskingLowLevelProt
INTEGER,
maskingLowLevelProtCondition
INTEGER,
maskingHighLevelProt
Integer32,
maskingHighLevelProtCondition
INTEGER,
maskingPortNum
Integer32,
maskingPortNumCondition
INTEGER,
maskingOperation
INTEGER,
maskingSrcPortNum
Integer32,
maskingSrcPortNumCondition
INTEGER
}
maskingType OBJECT-TYPE
SYNTAX INTEGER {
tx (1),
rx (2),
compress(3),
priority(4),
loadSharing(5),
facs(6),
codConnect(7),
codDisconnect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines the type of mask entry. "
::= { maskingEntry 1 }
maskingIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the ifIndex of the interface to which the mask is applied."
::= { maskingEntry 2 }
maskingIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index to the masking table. This number should not be greater than maskingMaxEntries"
::= { maskingEntry 3 }
maskingProtocolType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
ip (2),
ipx (3),
sna (4),
netbios (5),
apple (6),
dec (7),
all (255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The base protocol for masking. IPX, IP, others."
::= { maskingEntry 4 }
maskingSmartMaskOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A reference to a specific Smart mask table (old radBridgeMaskTable)
which enables a more specific mask type.
If this information is not available, its value
should be set to the OBJECT IDENTIFIER { 0 0 }. "
::= { maskingEntry 5 }
maskingFrameType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
all (2),
broadcast (3),
multicast (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the user to decide about frame type
* all frame
* just broadcast
* just multicast."
::= { maskingEntry 6 }
maskingFrameTypeCondition OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
maskingFrameType the packet contains data that matches
the content of maskingFrameType.
fa lse - Condition is valid if at the position specified by
maskingFrameType the packet contains data that does not
match the content of maskingFrameType."
::= { maskingEntry 7 }
maskingSourceAddress OBJECT-TYPE
SYNTAX GenAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source address is according to the maskingMacOrNet and
maskingProtocolType variables.
In case of 'MAC' enter 6 bytes (48 bit) of source address.
In case of 'NET'
if the maskingProtocolType is IP, this is the IP address
if the maskingProtocolType is IPX, this is the IPX address
(nnnnmmmmmmss)
nnnn - IPX net address
mmmmmm - Node address (Mac)
ss - IPX socket
In case of 'Apple'
nn - net address (4 nibbles)
ss - socket (4 nibbles)."
::= { maskingEntry 8 }
maskingSourceActiveBits OBJECT-TYPE
SYNTAX GenAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the positions of the wild card characters (*)
in the maskingSourceAddress field. Only the 1's bit will be taken in
considerations."
::= { maskingEntry 9 }
maskingSourceMacOrNet OBJECT-TYPE
SYNTAX INTEGER {
macAddress (1),
netAddress (2),
ipRange (3),
appleAddress(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The variable maskingSourceAddress and maskingSourceActiveBits
will be treated as MAC, or NET address.
- If maskingProtocolType = 'all', 'sna', 'netbios', dec or
'unknown', the maskingSourceMacOrNet can be macAddress only!
- If maskingProtocolType = 'ip' the
maskingSourceMacOrNet can be macAddress or netAddress or
appleAddress.
- If maskingProtocolType = 'ipx', the
maskingSourceMacOrNet can be either macAddress or netAddress.
- If maskingProtocolType = 'apple', the
maskingSourceMacOrNet can be either macAddress or appleAddress."
::= { maskingEntry 10 }
maskingSourceCondition OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
maskingSourceAddress (in conjunction with maskingSourceActiveBits)
the packet contains data that matches the content of maskingSourceAddress.
false - Condition is valid if at the position specified by
maskingSourceAddress (in conjunction with maskingSourceActiveBits)
the packet contains data that does not match the content of
maskingSourceAddress."
::= { maskingEntry 11 }
maskingDestAddress OBJECT-TYPE
SYNTAX GenAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
The destination address is according to the maskingMacOrNet and maskingProtocolType variables.
In case of 'MAC' enter 6 bytes (48 bit) of source address.
In case of 'NET'
if the maskingProtocolType is IP, this is the IP address
if the maskingProtocolType is IPX, this is the IPX address
(nnnnmmmmmmss)
nnnn - IPX net address
mmmmmm - Node address (Mac)
ss - IPX socket.
In case of 'Apple'
nn - net address (4 nibbles)
ss - socket (4 nibbles).
The IPX socket entered here has priority over the value of
maskingLowLevelProt, when it is ipxRip, ipxSap or ipxSpx,
unless the entered IPX socket is don't care. "
::= { maskingEntry 12 }
maskingDestActiveBits OBJECT-TYPE
SYNTAX GenAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
Specifies the positions of the wild card characters (*)
in the maskingDestAddress field. Only the 1's bit will be taken in
considerations."
::= { maskingEntry 13 }
maskingDestMacOrNet OBJECT-TYPE
SYNTAX INTEGER {
macAddress (1),
netAddress (2),
ipRange (3),
appleAddress(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
- If maskingProtocolType = 'all', 'sna', 'netbios', dec or
'unknown', the maskingDestMacOrNet can be macAddress only!
- If maskingProtocolType = 'ip' the
maskingDestMacOrNet can be macAddress or netAddress or
appleAddress.
- If maskingProtocolType = 'ipx', the
maskingDestMacOrNet can be either macAddress or netAddress.
- If maskingProtocolType = 'apple', the
maskingDestMacOrNet can be either macAddress or appleAddress.
The variable maskingDestAddress and maskingDestActiveBits will
be treated as MAC, or NET address. "
::= { maskingEntry 14 }
maskingDestCondition OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
maskingDestAddress (in conjunction with maskingDestActiveBits)
the packet contains data that matches the content of maskingDestAddress.
false - Condition is valid if at the position specified by
maskingDestAddress (in conjunction with maskingDestActiveBits)
the packet contains data that does not match the content of maskingDestAddress."
::= { maskingEntry 15 }
maskingLowLevelProt OBJECT-TYPE
SYNTAX INTEGER {
unknown (1), -- don't care
ipxRip (2), -- 0x51
ipxSap (3), -- 0x52
ipxSpx (4), -- 0x53
ipUdp (5), -- 0x54
ipTcp (6), -- 0x55
ipIcmp (7), -- 0x56
ipxNcp (8), -- 0x57
ipxWan (9), -- 0x58
ipxEco (10), -- 0x59
ipxErr (11), -- 0x5a
ipxPep (12) -- 0x5b
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field is set in conjunction with the maskingProtocolType variable.
This variable specifies the low level protocol.
The IPX socket entered in maskingDestAddress has priority
over the value of maskingLowLevelProt, when it is ipxRip,
ipxSap or ipxSpx, unless the entered IPX socket is don't
care."
::= { maskingEntry 16 }
maskingLowLevelProtCondition OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
maskingLowLevelProt the packet contains data that matches
the content of maskingLowLevelProt.
false - Condition is valid if at the position specified by
maskingLowLevelProt the packet contains data that does not
match the content of maskingLowLevelProt."
::= { maskingEntry 17 }
maskingHighLevelProt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field is set in connection to the maskingProtocolType variable.
This variable specifies the high level protocols (application).
As for today it supports just IP protocol stack.
The object's value is a sum of the following instances values
(selected by user):
none (0), -- don't care
ftp (1),
ftpC (2),
telnet (4),
smtp (8),
tftp (16),
snmp (32),
snmpTrap (64),
ipRip (128),
www (256),
email (512),
dns (1024),
For Apple Protocol only:
rtmp (2048),
nbp (4096),
atp (8192),
aep (16384),
zip (32768),
adsp (65536),
pap (131072),
asp (262144)
Example: if ftp(1), snmp(32) and snmpTrap(64) instances
were selected, the value should be 97 (=1+32+64)."
::= { maskingEntry 18 }
maskingHighLevelProtCondition OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
maskingHighLevelProt the packet contains data that matches
the content of maskingHighLevelProt.
false - Condition is valid if at the position specified by
maskingHighLevelProt the packet contains data that does not
match the content of maskingHighLevelProt."
::= { maskingEntry 19 }
maskingPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number is the same as in high level protocol. It
specifies the dest. port in IP case or the dest. socket
in case of IPX & apple protocols.
IP - This object is applicable only if none (0) value was selected in
maskingHighLevelProt.
IPX - This object is applicable only if the socket
entered in maskingDestAddress is 'don't care'(00) AND
maskingLowLevelProt is NOT ipxRip or ipxSap.
Apple - This option is applicable only if the socket
entered in maskingDestAddress is 'don't care'(00)."
::= { maskingEntry 20 }
maskingPortNumCondition OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
maskingPortNum the packet contains data that matches
the content of maskingPortNum.
false - Condition is valid if at the position specified by
maskingPortNum the packet contains data that does not
match the content of maskingPortNum.
This object is applicable only when maskingPortNum is applicable."
::= { maskingEntry 21 }
maskingOperation OBJECT-TYPE
SYNTAX INTEGER {
block (1),
forward (2),
route (3),
forward-route (4),
high-priority (5),
noOp (6),
delete (7),
smartMask (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of action to be taken if the frame meets the
conditions of the mask.
noOp = disabled (mask remains on list, but is not active)
delete = mask is removed from the list.
smartMask = the operation and destination of the mask will
be determined by the objects of the Smart Table
(old masking table: radBridgeMaskTable).
If maskingType is codConnect, the 'block' value is NOT
allowed.
If maskingType is codDisconnect, the 'forward' value is NOT
allowed."
::= { maskingEntry 22 }
maskingSrcPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number.
For IP: No Condition.
For IPX: This object is applicable only if the socket entered in
maskingSourceAddress is don't care (00) and maskingLowLevelProt
is NOT ipxRip or ipxSap.
For Apple:This object is applicable only if the socket entered in
maskingSourceAddress is don't care (00). "
::= { maskingEntry 23 }
maskingSrcPortNumCondition OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The same as 'maskingPortNumCondition'.
Relates to source port."
::= { maskingEntry 24 }
radBridgePerformance OBJECT IDENTIFIER ::= {genBridge 7 }
-- The RAD Bridge current table contains statistics being
-- collected for the current 15 minute interval.
radBridgeCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RAD Bridge Current table."
::= { radBridgePerformance 1 }
radBridgeCurrentEntry OBJECT-TYPE
SYNTAX RadBridgeCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the RAD Bridge Current table."
INDEX { radBridgeCurrentIndex }
::= { radBridgeCurrentTable 1 }
RadBridgeCurrentEntry ::= SEQUENCE {
radBridgeCurrentIndex Integer32,
radBridgeCurrentIngressFilteringDiscardedFrames Gauge32,
radBridgeCurrentFrameTypeDiscardedFrames Gauge32,
radBridgeCurrentRxCorrectFrames Gauge32,
radBridgeCurrentRxCorrectBytes Gauge32,
radBridgeCurrentRxCorrectBytesHCOverflow Gauge32,
radBridgeCurrentRxBcastFrames Gauge32,
radBridgeCurrentRxMcastFrames Gauge32,
radBridgeCurrentTxCorrectFrames Gauge32,
radBridgeCurrentTxCorrectBytes Gauge32,
radBridgeCurrentTxCorrectBytesHCOverflow Gauge32,
radBridgeCurrentTxBcastFrames Gauge32,
radBridgeCurrentTxMcastFrames Gauge32,
radBridgeCurrentTxDropFrames Gauge32
}
radBridgeCurrentIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Bridge interface or Bridge Port.
It may be ifIndex."
::= { radBridgeCurrentEntry 1 }
radBridgeCurrentIngressFilteringDiscardedFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Discarded
Frames upon Ingress Filtering, encountered by a Bridge
interface in the current 15 minute interval."
::= { radBridgeCurrentEntry 2 }
radBridgeCurrentFrameTypeDiscardedFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Discarded
Frames upon Frame Type and Tagging Mismatch, encountered
by a Bridge interface in the current 15 minute interval."
::= { radBridgeCurrentEntry 3 }
radBridgeCurrentRxCorrectFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Received Correct Frames,
encountered by a Bridge Port in the current 15 minute interval."
::= { radBridgeCurrentEntry 4 }
radBridgeCurrentRxCorrectBytes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Received Correct Bytes,
encountered by a Bridge Port in the current 15 minute interval."
::= { radBridgeCurrentEntry 5 }
radBridgeCurrentRxCorrectBytesHCOverflow OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of times the associated
radBridgeCurrentRxCorrectBytes counter has overflowed."
::= { radBridgeCurrentEntry 6 }
radBridgeCurrentRxBcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Received Broadcast Frames,
encountered by a Bridge Port in the current 15 minute interval."
::= { radBridgeCurrentEntry 7 }
radBridgeCurrentRxMcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Received Multicast Frames,
encountered by a Bridge Port in the current 15 minute interval."
::= { radBridgeCurrentEntry 8 }
radBridgeCurrentTxCorrectFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Correct Frames,
encountered by a Bridge Port in the current 15 minute interval."
::= { radBridgeCurrentEntry 9 }
radBridgeCurrentTxCorrectBytes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Correct Bytes,
encountered by a Bridge Port in the current 15 minute interval."
::= { radBridgeCurrentEntry 10 }
radBridgeCurrentTxCorrectBytesHCOverflow OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of times the associated
radBridgeCurrentTxCorrectBytes counter has overflowed."
::= { radBridgeCurrentEntry 11 }
radBridgeCurrentTxBcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Broadcast Frames,
encountered by a Bridge Port in the current 15 minute interval."
::= { radBridgeCurrentEntry 12 }
radBridgeCurrentTxMcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Multicast Frames,
encountered by a Bridge Port in the current 15 minute interval."
::= { radBridgeCurrentEntry 13 }
radBridgeCurrentTxDropFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Dropped Frames,
encountered by a Bridge Port in the current 15 minute interval."
::= { radBridgeCurrentEntry 14 }
--Interval Table
-- The RAD Bridge Interval table contains statistics being
-- collected by each Interface over the previous 24
-- hours of operation. The past 24 hours are broken into 96
-- completed 15 minute intervals.
radBridgeIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RAD Bridge Interval table."
::= { radBridgePerformance 2 }
radBridgeIntervalEntry OBJECT-TYPE
SYNTAX RadBridgeIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the RAD Bridge Interval table."
INDEX { radBridgeIntervalIndex, radBridgeIntervalNumber }
::= { radBridgeIntervalTable 1 }
RadBridgeIntervalEntry ::= SEQUENCE {
radBridgeIntervalIndex Integer32,
radBridgeIntervalNumber Integer32,
radBridgeIntervalIngressFilteringDiscardedFrames Gauge32,
radBridgeIntervalFrameTypeDiscardedFrames Gauge32,
radBridgeIntervalRxCorrectFrames Gauge32,
radBridgeIntervalRxCorrectBytes Gauge32,
radBridgeIntervalRxCorrectBytesHCOverflow Gauge32,
radBridgeIntervalRxBcastFrames Gauge32,
radBridgeIntervalRxMcastFrames Gauge32,
radBridgeIntervalTxCorrectFrames Gauge32,
radBridgeIntervalTxCorrectBytes Gauge32,
radBridgeIntervalTxCorrectBytesHCOverflow Gauge32,
radBridgeIntervalTxBcastFrames Gauge32,
radBridgeIntervalTxMcastFrames Gauge32,
radBridgeIntervalTxDropFrames Gauge32
}
radBridgeIntervalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the bridge interface or Bridge Port.
It may be ifIndex."
::= { radBridgeIntervalEntry 1 }
radBridgeIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals exist)."
::= { radBridgeIntervalEntry 2 }
radBridgeIntervalIngressFilteringDiscardedFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Discarded
Frames upon Ingress Filtering, encountered by a
Bridge interface in one of the previous 96, individual
15 minute, intervals."
::= { radBridgeIntervalEntry 3 }
radBridgeIntervalFrameTypeDiscardedFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Discarded
Frames upon Frame Type and Tagging Mismatch, encountered
by a Bridge interface in one of the previous 96, individual
15 minute, intervals."
::= { radBridgeIntervalEntry 4 }
radBridgeIntervalRxCorrectFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Received Correct Frames,
encountered by a Bridge Port in one of the previous 96,
individual 15 minute, intervals."
::= { radBridgeIntervalEntry 5 }
radBridgeIntervalRxCorrectBytes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Received Correct Bytes,
encountered by a Bridge Port in one of the previous 96,
individual 15 minute, intervals."
::= { radBridgeIntervalEntry 6 }
radBridgeIntervalRxCorrectBytesHCOverflow OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of times the associated
radBridgeIntervalRxCorrectBytes counter has overflowed."
::= { radBridgeIntervalEntry 7 }
radBridgeIntervalRxBcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Received Broadcast Frames,
encountered by a Bridge Port in one of the previous 96,
individual 15 minute, intervals."
::= { radBridgeIntervalEntry 8 }
radBridgeIntervalRxMcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Received Multicast Frames,
encountered by a Bridge Port in one of the previous 96,
individual 15 minute, intervals."
::= { radBridgeIntervalEntry 9 }
radBridgeIntervalTxCorrectFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Correct Frames,
encountered by a Bridge Port in one of the previous 96,
individual 15 minute, intervals."
::= { radBridgeIntervalEntry 10 }
radBridgeIntervalTxCorrectBytes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Correct Bytes,
encountered by a Bridge Port in one of the previous 96,
individual 15 minute, intervals."
::= { radBridgeIntervalEntry 11 }
radBridgeIntervalTxCorrectBytesHCOverflow OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of times the associated
radBridgeIntervalTxCorrectBytes counter has overflowed."
::= { radBridgeIntervalEntry 12 }
radBridgeIntervalTxBcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Broadcast Frames,
encountered by a Bridge Port in one of the previous 96,
individual 15 minute, intervals."
::= { radBridgeIntervalEntry 13 }
radBridgeIntervalTxMcastFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Multicast Frames,
encountered by a Bridge Port in one of the previous 96,
individual 15 minute, intervals."
::= { radBridgeIntervalEntry 14 }
radBridgeIntervalTxDropFrames OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Transmitted Dropped Frames,
encountered by a Bridge Port in one of the previous 96,
individual 15 minute, intervals."
::= { radBridgeIntervalEntry 15 }
radBridgePortBaseVlan OBJECT IDENTIFIER ::= {genBridge 8 }
radBridgePortBaseVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgePortBaseVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by management.
All entries are permanent and will
be restored after the device is reset."
::= { radBridgePortBaseVlan 1 }
radBridgePortBaseVlanEntry OBJECT-TYPE
SYNTAX RadBridgePortBaseVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured into the
device by (local or network) management."
INDEX { radBridgePortBaseVlanCnfgIdx,radBridgePortBaseVlanIdx }
::= { radBridgePortBaseVlanTable 1 }
RadBridgePortBaseVlanEntry ::=
SEQUENCE {
radBridgePortBaseVlanCnfgIdx Integer32,
radBridgePortBaseVlanIdx Integer32,
radBridgePortBaseVlanName SnmpAdminString,
radBridgePortBaseVlanEgressPorts PortList,
radBridgePortBaseVlanVirtualGroups PortList,
radBridgePortBaseVlanRowStatus RowStatus,
radBridgePortBaseVlanMng INTEGER
}
radBridgePortBaseVlanCnfgIdx OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the Idx of the Agent Cnfg the following
objects refer.
255=Temporary Cnfg (when relevant,
Set is done only to this configuration).
For Agents that support only one configuration,
this object will be constant=1. "
::= { radBridgePortBaseVlanEntry 1 }
radBridgePortBaseVlanIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the port based VLAN."
::= { radBridgePortBaseVlanEntry 2 }
radBridgePortBaseVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the the port based VLAN."
::= { radBridgePortBaseVlanEntry 3 }
radBridgePortBaseVlanEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are permanently assigned to the
egress list for this port based VLAN by management.
The default value of this object is a string of zeros."
::= { radBridgePortBaseVlanEntry 4 }
radBridgePortBaseVlanVirtualGroups OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of Virtual Groups which are permanently assigned to
this port based VLAN by management.
(read Virtual Group instead of port in PortList Textual Convention)
The default value of this object is a string of zeros."
::= { radBridgePortBaseVlanEntry 5 }
radBridgePortBaseVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enable user to
create/delete entries in this table."
::= { radBridgePortBaseVlanEntry 6 }
radBridgePortBaseVlanMng OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
disable (2),
enable (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows user to enable/disable
management traffic on this VLAN.
disable - only non-management data is allowed.
enable - mixture of management traffic 0with other
types of data is allowed."
::= { radBridgePortBaseVlanEntry 7 }
-- The Bridge's Ports-VLANs Memebership Table
radBridgePortVlanMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgePortVlanMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Bridge Ports-VLAN Membership table.
This table enables the user to assign:
- Several VLANs to a Port.
- Several Ports to a VLAN."
::= { radBridgePortBaseVlan 2 }
radBridgePortVlanMemberEntry OBJECT-TYPE
SYNTAX RadBridgePortVlanMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Bridge Ports-VLANs Memebership table."
INDEX { radBridgePortVlanMemberBridgeIdx,
radBridgePortVlanMemberPortIdx,
radBridgePortVlanMemberVlanId }
::= { radBridgePortVlanMemberTable 1 }
RadBridgePortVlanMemberEntry ::=
SEQUENCE {
radBridgePortVlanMemberBridgeIdx Integer32,
radBridgePortVlanMemberPortIdx Integer32,
radBridgePortVlanMemberVlanId Integer32,
radBridgePortVlanMemberRowStatus RowStatus
}
radBridgePortVlanMemberBridgeIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Bridge Index."
::= { radBridgePortVlanMemberEntry 1 }
radBridgePortVlanMemberPortIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Bridge's Port Index.
For some cases, it can be used as the Port ofIndex."
::= { radBridgePortVlanMemberEntry 2 }
radBridgePortVlanMemberVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID."
::= { radBridgePortVlanMemberEntry 3 }
radBridgePortVlanMemberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables the user to
create/delete entries in this table."
::= { radBridgePortVlanMemberEntry 4 }
radBridgeGenCnfg OBJECT IDENTIFIER ::= {genBridge 9 }
radBridgeGenFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeGenFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
Bridge configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { radBridgeGenCnfg 1 }
radBridgeGenFlowEntry OBJECT-TYPE
SYNTAX RadBridgeGenFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a Bridge configured into the
device by management."
INDEX { radBridgeGenFlowCnfgIdx,radBridgeGenFlowIdx }
::= { radBridgeGenFlowTable 1 }
RadBridgeGenFlowEntry ::= SEQUENCE {
radBridgeGenFlowCnfgIdx Integer32,
radBridgeGenFlowIdx Integer32,
radBridgeGenFlowRowStatus RowStatus,
radBridgeGenFlowFloodOrBcastMaxRate Integer32,
radBridgeGenFlowQosMode INTEGER,
radBridgeGenFlowSchedulingMode INTEGER,
radBridgeGenFlowBasicClassification INTEGER,
radBridgeGenFlowMulticastTrafficClass Integer32,
radBridgeGenFlowBroadcastTrafficClass Integer32,
radBridgeGenFlowUnkownUnicastTrafficClass Integer32
}
radBridgeGenFlowCnfgIdx OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the Idx of the
Agent Cnfg the following objects refer.
255=Temporary Cnfg (when relevant Set is done
only to this configuration).
For Agents that support only one configuration,
this object will be constant=1.
This object can be used to carry additional indexing
(e.g port index) when needed."
::= { radBridgeGenFlowEntry 1 }
radBridgeGenFlowIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For Agent having more than one bridge,
this index may be used as bridge index "
::= { radBridgeGenFlowEntry 2 }
radBridgeGenFlowRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enable user to
create/delete entries in this table."
::= { radBridgeGenFlowEntry 3 }
radBridgeGenFlowFloodOrBcastMaxRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls maximum Flooding or Broadcast Rate:
Max number of multicast along with unknown
or flooded unicast frames allowed to enter
any port.
The number can be presented either as percentage of bandwidth, or bandwidth in Kbps.
Once the limit is exceeded, any multicast or flooded
frame entering from the port is discarded
For RIC-155, and FCD-155 valid values are 3% , 6%, 12%
and 100% = No Limit"
::= { radBridgeGenFlowEntry 4 }
radBridgeGenFlowQosMode OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
vlanTag (2), -- 802.1p
dscp (3),
dscpAndVlanTag (4),
vlanTagAndDscp (5),
none (6),
tos (7),
perPort (8),
ipPrecedence (9),
dsField (10),
vlanTagAndTos (11),
tosAndVlanTag (12),
vlanTagAndIpPrecedence(13),
ipPrecedenceAndVlanTag(14),
vlanTagAndDsField (15),
dsFieldAndVlanTag (16),
vlanId (17) --VLAN ID
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls Quality of Service mode.
User may select which field(s)
(in case of fields - which one has precedence)
will affect prioritization of data between egress queues."
::= { radBridgeGenFlowEntry 5 }
radBridgeGenFlowSchedulingMode OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
wfq (2), -- Weighted Fair Queuing
sp (3), -- Strict Priority
atmCos (4), -- ATM Class of Service
wrr (5), -- Weighted Round Robin
hqpAndWrr (6), -- Highest Queue Preempt + Weighted Round Robin
spAndWrr (7) -- Strict Priority + Weighted Round Robin
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls which scheduling mode is used.
hqpAndWrr(6) - The highest queue will be emptied first, then the
other queues, according to WRR (Weighted Round Robin)."
DEFVAL { sp }
::= { radBridgeGenFlowEntry 6 }
radBridgeGenFlowBasicClassification OBJECT-TYPE
SYNTAX INTEGER
{
none (2),
port (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines whether Classification based on Port should be
taken into account (either as default, or in addition to other
classifications)."
::= { radBridgeGenFlowEntry 7 }
radBridgeGenFlowMulticastTrafficClass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Traffic Class the received Multicast frame is mapped to."
::= { radBridgeGenFlowEntry 8 }
radBridgeGenFlowBroadcastTrafficClass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Traffic Class the received Broadcast frame is mapped to."
::= { radBridgeGenFlowEntry 9 }
radBridgeGenFlowUnkownUnicastTrafficClass OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Traffic Class the received
Unkonwn Unicast frame is mapped to."
::= { radBridgeGenFlowEntry 10 }
radBridgeDot1qVlanStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeDot1qVlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { radBridgeGenCnfg 2 }
radBridgeDot1qVlanStaticEntry OBJECT-TYPE
SYNTAX RadBridgeDot1qVlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured into the
device by (local or network) management."
AUGMENTS { dot1qVlanStaticEntry }
::= { radBridgeDot1qVlanStaticTable 1 }
RadBridgeDot1qVlanStaticEntry ::= SEQUENCE {
radBridgeDot1qVlanTaggedPorts PortList,
radBridgeDot1qVlanUnmodifiedPorts PortList,
radBridgeDot1qVlanSplitHorizon INTEGER,
radBridgeDot1qVlanRingMembers BITS
}
radBridgeDot1qVlanTaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which should transmit egress packets
for this VLAN as tagged."
::= { radBridgeDot1qVlanStaticEntry 1 }
radBridgeDot1qVlanUnmodifiedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which should transmit egress packets
for this VLAN as unmodified."
::= { radBridgeDot1qVlanStaticEntry 2 }
radBridgeDot1qVlanSplitHorizon OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
disable (2),
enable (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When 'enable (3)', packets having this VLAN will
not be switched back to other bridge ports which are
members of this VLAN."
::= { radBridgeDot1qVlanStaticEntry 3 }
radBridgeDot1qVlanRingMembers OBJECT-TYPE
SYNTAX BITS {
notApplicable (0),
ring1 (1),
ring2 (2),
ring3 (3),
ring4 (4),
ring5 (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates which Ring (ERP=Ethernet Ring Protection)
are members of this VLAN. For each BIT, the value means:
'1' = Ring is member of this VLAN.
'0' = Ring is NOT member of this VLAN."
::= { radBridgeDot1qVlanStaticEntry 4 }
ieee8021QBridgeVlanStaticXTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeVlanStaticXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or network)
management.
All entries are permanent and are restored after the device
reset.
The table is similar to radBridgeDot1qVlanStaticTable, but
supports multiple bridges."
::= { radBridgeGenCnfg 7 }
ieee8021QBridgeVlanStaticXEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeVlanStaticXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured into the
device by (local or network) management."
AUGMENTS { ieee8021QBridgeVlanStaticEntry }
::= { ieee8021QBridgeVlanStaticXTable 1 }
Ieee8021QBridgeVlanStaticXEntry ::= SEQUENCE {
ieee8021QBridgeVlanStaticXSplitHorizon INTEGER,
ieee8021QBridgeVlanStaticXRingMembers OCTET STRING,
ieee8021QBridgeVlanStaticXMaxMacAddr Unsigned32,
ieee8021QBridgeVlanStaticXTopology BridgeTopology
}
ieee8021QBridgeVlanStaticXSplitHorizon OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
disable (2),
enable (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When 'enable (3)', packets having this VLAN will
not be switched back to other bridge ports which are
members of this VLAN."
::= { ieee8021QBridgeVlanStaticXEntry 3 }
ieee8021QBridgeVlanStaticXRingMembers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A sixteen-octet(128 bit) pattern: This object indicates which Ring (ERP=Ethernet Ring Protection)
are members of this VLAN. For each BIT, the value means:
'1' = Ring is member of this VLAN.
'0' = Ring is NOT member of this VLAN.
Each bit rank is related to the erpIdx value. For example the second bit rank (bit-1)
represents the erpIdx=1.
if the first bit rank (bit-0) is set to '1', it means that there is no ERP that is a
member in this VLAN-ID (not applicable).
From teh second bit rank (bit-1) to the 128 rank (bit-127) each bit set to '1' means that the
erpIdx= bit-rank is a member of this VLAN-ID."
::= { ieee8021QBridgeVlanStaticXEntry 4 }
ieee8021QBridgeVlanStaticXMaxMacAddr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the maximum number of MAC addresses
supported by this VLAN."
::= { ieee8021QBridgeVlanStaticXEntry 8 }
ieee8021QBridgeVlanStaticXTopology OBJECT-TYPE
SYNTAX BridgeTopology
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the bridge topology per VLAN.
The default is E-LAN (2)"
::= { ieee8021QBridgeVlanStaticXEntry 9 }
radBridgeStatus OBJECT IDENTIFIER ::= {genBridge 10 }
radBridgeInvBasePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeInvBasePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An inversed table to dot1dBasePortTable
from RFC1493 with reduced information.
This table index is known to the NMS and
this way the needed information can be received
by just one Get command, instead of searching
the entire dot1dBasePortTable (where it is an
attribute). "
::= { radBridgeStatus 1 }
radBridgeInvBasePortEntry OBJECT-TYPE
SYNTAX RadBridgeInvBasePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bridge port number for each bridge port
interface index."
INDEX { radBridgeInvBasePortIfIndex }
::= { radBridgeInvBasePortTable 1 }
RadBridgeInvBasePortEntry ::=
SEQUENCE {
radBridgeInvBasePortIfIndex Integer32,
radBridgeInvBasePort Integer32
}
radBridgeInvBasePortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to this Bridge port."
::= { radBridgeInvBasePortEntry 1 }
radBridgeInvBasePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge port number."
::= { radBridgeInvBasePortEntry 2 }
--Spanning Tree Protocol (STP)
radBridgeStp OBJECT IDENTIFIER ::= {genBridge 11 }
--Configuration Table
radBridgeStpCnfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeStpCnfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"STP Configuration table. STP=Spanning Tree Protocol.
It includes STP configurable parameters that in BRIDGE-MIB
are scalars, while we need them per card/bridge/interface
and per different configurations."
::= { radBridgeStp 1 }
radBridgeStpCnfgEntry OBJECT-TYPE
SYNTAX RadBridgeStpCnfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the radBridgeStpCnfgTable."
INDEX {radBridgeStpCnfgIdx1, radBridgeStpCnfgIdx2}
::= { radBridgeStpCnfgTable 1 }
RadBridgeStpCnfgEntry ::=
SEQUENCE {
radBridgeStpCnfgIdx1 Integer32,
radBridgeStpCnfgIdx2 Integer32,
radBridgeStpCnfgForwardDelay Timeout,
radBridgeStpCnfgMaxAge Timeout,
radBridgeStpCnfgHelloTime Timeout,
radBridgeStpCnfgPriority Integer32,
radBridgeStpCnfgStpVersion INTEGER
}
radBridgeStpCnfgIdx1 OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the Index of the Agent Configuration
the following objects refer to.
For Agents that support more than one configuration:
255=Temporary Cnfg ; Set can be done only to this configuration.
For Agents that support only one configuration, this object will be
constant=1."
::= { radBridgeStpCnfgEntry 1 }
radBridgeStpCnfgIdx2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For Agents having the table objects per Card/Bridge/Interface
this will be the index of the Card/Bridge/Interface used."
::= { radBridgeStpCnfgEntry 2 }
radBridgeStpCnfgForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that the bridge of radBridgeStpCnfgIdx2 uses for
Forward Delay when this bridge is acting as the root. Note that
the range for this parameter is related to the value of
radBridgeStpCnfgMaxAge (according to 802.1D-1990 for the similar
scalars of BRIDGE-MIB). The granularity of this timer is specified
by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is attempted to a value
which is not a whole number of seconds."
::= { radBridgeStpCnfgEntry 3 }
radBridgeStpCnfgMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that the bridge of radBridgeStpCnfgIdx2 uses for
MaxAge when this bridge is acting as the root. Note that
the range for this parameter is related to the value of
radBridgeStpCnfgHelloTime (according to 802.1D-1990 for the similar
scalars of BRIDGE-MIB). The granularity of this timer is specified
by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is attempted to a value
which is not a whole number of seconds."
::= { radBridgeStpCnfgEntry 4 }
radBridgeStpCnfgHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that the bridge of radBridgeStpCnfgIdx2 uses for
Hello Time when this bridge is acting as the root. The granularity
of this timer is specified by 802.1D-1990 to be 1 second. An agent
may return a badValue error if a set is attempted to a value
which is not a whole number of seconds."
::= { radBridgeStpCnfgEntry 5 }
radBridgeStpCnfgPriority OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID, per radBridgeStpCnfgIdx2
instance."
::= { radBridgeStpCnfgEntry 6 }
radBridgeStpCnfgStpVersion OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
stp (2),
rstp (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines the STP version used:
stp - usual Spanning Tree Protocol.
rstp - Rapid Spanning Tree Protocol."
::= { radBridgeStpCnfgEntry 7 }
--Status Table
radBridgeStpStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeStpStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"STP Status table. STP=Spanning Tree Protocol.
It includes STP status parameters that in BRIDGE-MIB
are scalars, while we need them per card/bridge/interface.
For devices that have several configurations, this table is for Status
of the Active configuration."
::= { radBridgeStp 2 }
radBridgeStpStatEntry OBJECT-TYPE
SYNTAX RadBridgeStpStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the radBridgeStpStatTable."
INDEX {radBridgeStpStatIdx}
::= { radBridgeStpStatTable 1 }
RadBridgeStpStatEntry ::=
SEQUENCE {
radBridgeStpStatIdx Integer32,
radBridgeStpStatForwardDelay Timeout,
radBridgeStpStatMaxAge Timeout,
radBridgeStpStatHelloTime Timeout,
radBridgeStpStatDesignatedRoot BridgeId,
radBridgeStpStatRootCost Integer32
}
radBridgeStpStatIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For Agents having the table objects per Card/Bridge/Interface
this will be the index of the Card/Bridge/Interface used."
::= { radBridgeStpStatEntry 1 }
radBridgeStpStatForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, which precede
the Forwarding state. This value is also used, when a topology
change has been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that this value is
the one that this bridge is currently using, in contrast to
radBridgeStpCnfgForwardDelay which is the value that this bridge
would start using if/when this bridge were to become the root.]"
::= { radBridgeStpStatEntry 2 }
radBridgeStpStatMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol information learned
from the network on any port before it is discarded, in units
of hundredths of a second. This is the actual value that this
bridge is currently using."
::= { radBridgeStpStatEntry 3 }
radBridgeStpStatHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration
bridge PDUs by this node on any port when it is the root of
the spanning tree or trying to become so, in units of hundredths
of a second. This is the actual value that this bridge is
currently using."
::= { radBridgeStpStatEntry 4 }
radBridgeStpStatDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { radBridgeStpStatEntry 5 }
radBridgeStpStatRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from this bridge."
::= { radBridgeStpStatEntry 6 }
ieee8021MstpXTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021MstpXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ieee8021MstpXTable augments ieee8021MstpTable.
It is used for mapping VLANs to MST instances.."
::= { radBridgeStp 3 }
ieee8021MstpXEntry OBJECT-TYPE
SYNTAX Ieee8021MstpXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ieee8021MstpXTable."
AUGMENTS { ieee8021MstpEntry }
::= { ieee8021MstpXTable 1 }
Ieee8021MstpXEntry ::= SEQUENCE {
ieee8021MstpXVids0 OCTET STRING,
ieee8021MstpXVids1 OCTET STRING,
ieee8021MstpXVids2 OCTET STRING,
ieee8021MstpXVids3 OCTET STRING
}
ieee8021MstpXVids0 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the first 1024 bits of the 4096 bit vector
indicating which VIDs are assigned to this MSTID. This is a read-writable
object corresponding to ieee8021MstpVids0."
::= { ieee8021MstpXEntry 1 }
ieee8021MstpXVids1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the first 1024 bits of the 4096 bit vector
indicating which VIDs are assigned to this MSTID. This is a read-writable
object corresponding to ieee8021MstpVids0."
::= { ieee8021MstpXEntry 2 }
ieee8021MstpXVids2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the third 1024 bits of the 4096 bit vector
indicating which VIDs are assigned to this MSTID. This is a read-writable
object corresponding to ieee8021MstpVids2"
::= { ieee8021MstpXEntry 3 }
ieee8021MstpXVids3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the fourth 1024 bits of the 4096 bit vector
indicating which VIDs are assigned to this MSTID. This is a read-writable
object corresponding to ieee8021MstpVids3"
::= { ieee8021MstpXEntry 4 }
radBridgeForwardingMode OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
transparent (2),
filter (3),
filterTagged (4),
transparentTagged (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines the Bridge Forwarding Mode:
transparent - Forward all frames received (not dependent on VLAN).
filter - Filter frames received according to MAC Address.
filterTagged = Filter frames received according to VLAN.
transparentTagged = VLAN aware + Transparent."
::= { genBridge 12 }
radBridgePort OBJECT IDENTIFIER ::= { genBridge 13 }
ieee8021BridgeBaseXTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021BridgeBaseXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A RAD-defined list of objects containing information for
each bridge. This table augments ieee8021BridgeBaseTable."
::= { genBridge 14 }
ieee8021BridgeBaseXEntry OBJECT-TYPE
SYNTAX Ieee8021BridgeBaseXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is indexed by ieee8021BridgeBaseComponentId."
AUGMENTS { ieee8021BridgeBaseEntry }
::= { ieee8021BridgeBaseXTable 1 }
Ieee8021BridgeBaseXEntry ::= SEQUENCE {
ieee8021BridgeBaseXForwardingMode INTEGER,
ieee8021BridgeBaseXName SnmpAdminString
}
ieee8021BridgeBaseXForwardingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
transparent (2),
filter (3),
filterTagged (4),
transparentTagged (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is similar with radBridgeForwardingMode.
It determines the Bridge Forwarding Mode:
transparent - Forward all frames received (not dependent on VLAN).
filter - Filter frames received according to MAC Address.
filterTagged - Filter frames received according to VLAN.
transparentTagged - VLAN aware + Transparent."
::= { ieee8021BridgeBaseXEntry 1 }
ieee8021BridgeBaseXName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the Bridge's Name."
::= { ieee8021BridgeBaseXEntry 2 }
invieee8021QBridgeVlanCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF Invieee8021QBridgeVlanCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Reverese table of ieee8021QBridgeVlanCurrentTable."
::= { genBridge 15 }
invieee8021QBridgeVlanCurrentEntry OBJECT-TYPE
SYNTAX Invieee8021QBridgeVlanCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for an FDB ID configured into the device."
INDEX { invieee8021QBridgeVlanCurrentComponentId,
invieee8021QBridgeVlanFdbId,
invieee8021QBridgeVlanTimeMark}
::= { invieee8021QBridgeVlanCurrentTable 1 }
Invieee8021QBridgeVlanCurrentEntry ::= SEQUENCE {
invieee8021QBridgeVlanCurrentComponentId IEEE8021PbbComponentIdentifier,
invieee8021QBridgeVlanFdbId Unsigned32,
invieee8021QBridgeVlanTimeMark TimeFilter,
invieee8021QBridgeVlanIndex IEEE8021VlanIndex
}
invieee8021QBridgeVlanCurrentComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { invieee8021QBridgeVlanCurrentEntry 1 }
invieee8021QBridgeVlanFdbId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Filtering Database used by this VLAN. This is one
of the ieee8021QBridgeFdbId values in the ieee8021QBridgeFdbTable.
This value is allocated automatically by the device whenever
the VLAN is created: either dynamically by MVRP, or by
management, in ieee8021QBridgeVlanStaticTable. Allocation of this
value follows the learning constraints defined for this
VLAN in ieee8021QBridgeLearningConstraintsTable."
::= { invieee8021QBridgeVlanCurrentEntry 2 }
invieee8021QBridgeVlanTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter
textual convention to see how this works."
::= { invieee8021QBridgeVlanCurrentEntry 3 }
invieee8021QBridgeVlanIndex OBJECT-TYPE
SYNTAX IEEE8021VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID or other identifier referring to this VLAN."
::= { invieee8021QBridgeVlanCurrentEntry 4 }
radBridgePortCnfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgePortCnfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Bridge Port Configuration Table."
::= { radBridgePort 1 }
radBridgePortCnfgEntry OBJECT-TYPE
SYNTAX RadBridgePortCnfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table."
INDEX { radBridgePortCnfgIdx, radBridgePortCnfgPrtIdx }
::= { radBridgePortCnfgTable 1 }
RadBridgePortCnfgEntry ::= SEQUENCE {
radBridgePortCnfgIdx Integer32,
radBridgePortCnfgPrtIdx Integer32,
radBridgePortCnfgMaxMacAddr Integer32,
radBridgePortCnfgMngFlow INTEGER,
radBridgePortCnfgMcastMode INTEGER,
radBridgePortCnfgDefaultVpi Integer32,
radBridgePortCnfgDefaultVci Integer32,
radBridgePortCnfgStatVlanId Integer32,
radBridgePortCnfgIngressMtu Integer32,
radBridgePortCnfgEgressMtu Integer32,
radBridgePortCnfgDot1x INTEGER, -- Not in use. Moved to ethIftable
radBridgePortCnfgMappingProfile Integer32
}
radBridgePortCnfgIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The first index of the table.
It can serve for Configuration index, Bridge index or other."
::= { radBridgePortCnfgEntry 1 }
radBridgePortCnfgPrtIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the Bridge Port index."
::= { radBridgePortCnfgEntry 2 }
radBridgePortCnfgMaxMacAddr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of total MAC Addresses
(static and learned) supported by this Bridge Port."
::= { radBridgePortCnfgEntry 3 }
radBridgePortCnfgMngFlow OBJECT-TYPE
SYNTAX INTEGER {
disable (2),
enable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether this Bridge Port
is dedicated for management flow."
::= { radBridgePortCnfgEntry 4 }
radBridgePortCnfgMcastMode OBJECT-TYPE
SYNTAX INTEGER {
flooding (1),
forwarding (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates this Bridge Port's Multicast Mode:
flooding (1) - flood multicast MAC addresses
forwarding (2) - forward multicast MAC addresses to the subnet indicated."
::= { radBridgePortCnfgEntry 5 }
radBridgePortCnfgDefaultVpi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the VPI of this Bridge Port's Default VCL.
An incoming frame with priority that is not assigned to any VCL
will be transferred to the Default VCL."
::= { radBridgePortCnfgEntry 6 }
radBridgePortCnfgDefaultVci OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the VCI of this Bridge Port's Default VCL.
An incoming frame with priority that is not assigned to any VCL
will be transferred to the Default VCL."
::= { radBridgePortCnfgEntry 7 }
radBridgePortCnfgStatVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the selected VlanId of the bridge port
on which statistics are being collected.
0=no Statistics collected for VLAN on this bridge port."
::= { radBridgePortCnfgEntry 8 }
radBridgePortCnfgIngressMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the largest packet which can be received
on the interface, specified in octets."
::= { radBridgePortCnfgEntry 9 }
radBridgePortCnfgEgressMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the largest packet which can be sent
on the interface, specified in octets."
::= { radBridgePortCnfgEntry 10 }
radBridgePortCnfgDot1x OBJECT-TYPE
SYNTAX INTEGER
{
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This feature is currently supported via the variable ethIfTable.ethDot1xEnable.
Determnines if the Port-Based Network Access Protocol
(IEEE-802.1x)is enabled for the bridge Port."
::= { radBridgePortCnfgEntry 11 }
radBridgePortCnfgMappingProfile OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute defines the Queue Mapping Profile ID(cosProfileTable) assigned
to this Bridge Port."
::= { radBridgePortCnfgEntry 12 }
radDot1qPortVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadDot1qPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing control and status
information for VLAN configuration per port."
::= { radBridgeGenCnfg 3 }
radDot1qPortVlanEntry OBJECT-TYPE
SYNTAX RadDot1qPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling VLAN configuration for a port.
This is indexed by dot1dBasePort."
AUGMENTS { dot1dBasePortEntry }
::= { radDot1qPortVlanTable 1 }
RadDot1qPortVlanEntry ::=
SEQUENCE {
radDot1qPortStacking
INTEGER,
radDot1qPortCopyOriginVlanPriority
INTEGER,
radDot1qPortDefaultVlanPriority
Integer32,
radDot1qPortTagStripping
INTEGER,
radDot1qPortEgressTagHandling
INTEGER,
radDot1qPortIngressTagHandling
INTEGER,
radDot1qPortReplaceVlanPriority
INTEGER,
radDot1qPortVlanEthType
Unsigned32,
radDot1qPortVlanCnodeLevel1Agent
INTEGER
}
radDot1qPortStacking OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
unmodify (2),
tag (3),
stack (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port stacking operation:
unmodify (2) = Do not add Tag.
tag (3) = Add Tag to Untagged Frames.
stack (4) = Add Tag to all Frames."
::= { radDot1qPortVlanEntry 1 }
radDot1qPortCopyOriginVlanPriority OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
no (2),
yes (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether use the original VLAN Priority of the frame,
as the priority of the VLAN added by this port."
::= { radDot1qPortVlanEntry 2 }
radDot1qPortDefaultVlanPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default VLAN Frame priority of the VLAN added by this port."
::= { radDot1qPortVlanEntry 3 }
radDot1qPortTagStripping OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
no (2),
yes (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether remove a tag from the frame on this port,
frame with double tag will remain with one tag and frame with
one tag will remain untagged."
::= { radDot1qPortVlanEntry 4 }
radDot1qPortEgressTagHandling OBJECT-TYPE
SYNTAX INTEGER
{
none (2),
stacking (3),
stripping (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates how is the Egress VLAN Tag processed.
It is mainly for use with Double Tagging."
::= { radDot1qPortVlanEntry 5 }
radDot1qPortIngressTagHandling OBJECT-TYPE
SYNTAX INTEGER
{
none (2),
stacking (3),
stripping (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates how is the Ingress VLAN Tag processed.
It is mainly for use with Double Tagging."
::= { radDot1qPortVlanEntry 6 }
radDot1qPortReplaceVlanPriority OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
no (2),
yes (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether for each received tagged frame on this Bridge Port -
VLAN Priority will be replaced by another Priority.
no(2) = no repacement
yes(3) = VLAN Priority will be replaced
For Egate-100:
When value is 'yes', the original Priority is replaced by the Default Priority."
::= { radDot1qPortVlanEntry 7 }
radDot1qPortVlanEthType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Ethernet Type.
For some devices, it is applicable only when radDot1qPortStacking = stack."
::= { radDot1qPortVlanEntry 8 }
radDot1qPortVlanCnodeLevel1Agent OBJECT-TYPE
SYNTAX INTEGER
{
disable (2),
enable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify if a Level 1 cNode agent is enabled or not for the bridge port."
::= { radDot1qPortVlanEntry 9 }
radBridgeGenCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgeGenCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Bridge configuration parameters."
::= { radBridgeGenCnfg 4 }
radBridgeGenCfgEntry OBJECT-TYPE
SYNTAX RadBridgeGenCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes an entry in the radBridgeGenCfgTable."
INDEX { radBridgeGenCfgIdx, radBridgeGenCfgIdx2 }
::= { radBridgeGenCfgTable 1 }
RadBridgeGenCfgEntry ::= SEQUENCE {
radBridgeGenCfgIdx Integer32,
radBridgeGenCfgIdx2 Integer32,
radBridgeGenCfgBridgeAction INTEGER,
radBridgeAgingTimeSec INTEGER,
radBridgeMngVlanId Unsigned32,
radBridgeLoopDetectVlanId Unsigned32,
radBridgeSplitHorizon INTEGER,
radBridgeEthType Unsigned32,
radBridgeTopology BridgeTopology
}
radBridgeGenCfgIdx OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the Idx of the
Agent Cnfg the following objects refer.
255=Temporary Cnfg.
For Agents that support only one Configuration,
this object will be constant=1. "
::= { radBridgeGenCfgEntry 1 }
radBridgeGenCfgIdx2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For Agents having more than one bridge,
this index may be used as bridge index "
::= { radBridgeGenCfgEntry 2 }
radBridgeGenCfgBridgeAction OBJECT-TYPE
SYNTAX INTEGER {
deleteLanTab(7),
noOp(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable enables the operator to perform one of the
specified actions on the tables maintained by the Bridge.
After performing the action, Agent will automatically
Set the value of this variable to noOp(255)."
::= { radBridgeGenCfgEntry 3 }
radBridgeAgingTimeSec OBJECT-TYPE
SYNTAX INTEGER (10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable duplicates scalar object
dot1dTpAgingTimeThe of BRIDGE-MIB with configuration index
and Bridge index.
It defines the timeout period in seconds for aging out
dynamically learned forwarding information.
802.1D-1990 recommends a default of 300 seconds."
REFERENCE
"IEEE 802.1D-1990: Section 6.7.1.1.3"
::= { radBridgeGenCfgEntry 4 }
radBridgeMngVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the VLAN ID
used for remote management traffic.
0 = Not Applicable."
::= { radBridgeGenCfgEntry 5 }
radBridgeLoopDetectVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the VLAN ID used for Loop Detection packets.
Valid values:
1 - 4095: VLAN ID
0 - Means that the Loop Detection is Disabled."
::= { radBridgeGenCfgEntry 6 }
radBridgeSplitHorizon OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
disable (2),
enabled (3),
vlanBased (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configure 'split horizon' switching between bridge Ports.
- disable - normal (VLAN aware) bridge behavior.
- enable - all packets, regardless their VLAN, coming from user side
are blocked from being switched back to other user side bridge ports.
- vlanBased - split horizon behavior is applicable only for specific VLANs,
according to radBridgeDot1qVlanSplitHorizon."
::= { radBridgeGenCfgEntry 7 }
radBridgeEthType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of Ethertype field in Ethernet frame.
This field indicates which protocol is being transported
in an ethernet frame."
::= { radBridgeGenCfgEntry 8 }
radBridgeTopology OBJECT-TYPE
SYNTAX BridgeTopology
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the topology type of the Bridge.
The default is E-LAN (2)"
::= { radBridgeGenCfgEntry 9 }
radBridgeAgingTime OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
infinite(2),
finite (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines whether the Aging Time will be finite or infinite.
When selecting the finite (3) value, the exact time will be determined
by another variable of the standard MIB (ex. 1493.dot1dTpAgingTime).
or by radBridgeAgingTime below."
::= { radBridgeGenCnfg 5 }
radBridgeMngFlow OBJECT-TYPE
SYNTAX INTEGER {
disable (2),
enable (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines whether the Management Flow is passed
through the bridge (enable) or not (disable)."
::= { radBridgeGenCnfg 6 }
-- radBridgePortVlanTable
radBridgePortVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadBridgePortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Bridge configuration parameters
of the management traffic."
::= { radBridgeGenCnfg 9 }
radBridgePortVlanEntry OBJECT-TYPE
SYNTAX RadBridgePortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes an entry in the radBridgePortVlanTable."
INDEX { radBridgePortVlanBridgeIdx , radBridgePortVlanIdx, radBridgePortVlanPrtIdx }
::= { radBridgePortVlanTable 1 }
RadBridgePortVlanEntry ::= SEQUENCE {
radBridgePortVlanBridgeIdx IEEE8021PbbComponentIdentifier,
radBridgePortVlanIdx IEEE8021VlanIndex,
radBridgePortVlanPrtIdx IEEE8021BridgePortNumber,
radBridgePortVlanRowStatus RowStatus,
radBridgePortVlanIsRoot INTEGER
}
radBridgePortVlanBridgeIdx OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the Idx of the bridge."
::= { radBridgePortVlanEntry 1 }
radBridgePortVlanIdx OBJECT-TYPE
SYNTAX IEEE8021VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"- For VLAN Aware :
This object indicates the VLAN ID number.
- For VLAN Unaware:
This object is not applicable and the value shall be 0xFFFFFFFF = Not Applicable."
::= { radBridgePortVlanEntry 2 }
radBridgePortVlanPrtIdx OBJECT-TYPE
SYNTAX IEEE8021BridgePortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the bridge port Idx."
::= { radBridgePortVlanEntry 3 }
radBridgePortVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables creation and deletion of entries
in the radBridgePortVlanTable.
Leaf nodes of E-TREE topology will not be registered
in this table (see object radBridgePortVlanIsRoot)."
::= { radBridgePortVlanEntry 4 }
radBridgePortVlanIsRoot OBJECT-TYPE
SYNTAX INTEGER
{
yes (2),
no (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if the node is Root port
or Leaf port.
By default:
- for E-LAN topology all nodes are root.
- for E-TREE topology all nodes that are leaves will
not be registered.
"
::= { radBridgePortVlanEntry 5 }
bridgeMacSearchTable OBJECT-TYPE
SYNTAX SEQUENCE OF BridgeMacSearchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table that allow to find specific MAC address in a bridge
its allow to search:
- specific Mac address in a bridge
- Mac addresses on a VLAN
- Mac addresses on a port."
::= { radBridgeStatus 2 }
bridgeMacSearchEntry OBJECT-TYPE
SYNTAX BridgeMacSearchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries define list of MAC and VLAN per bridge."
INDEX { bridgeMacSearchIdx }
::= { bridgeMacSearchTable 1 }
BridgeMacSearchEntry ::= SEQUENCE {
bridgeMacSearchIdx Unsigned32,
bridgeMacSearchBridgeComponentId Unsigned32,
bridgeMacSearchAddress MacAddress,
bridgeMacSearchVlan Unsigned32,
bridgeMacSearchPort Unsigned32,
bridgeMacSearchCmdStatus INTEGER
}
bridgeMacSearchIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Value is always equal to 1."
::= { bridgeMacSearchEntry 1 }
bridgeMacSearchBridgeComponentId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mac address to search in a specific bridge."
::= { bridgeMacSearchEntry 2 }
bridgeMacSearchAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mac address to search in a specific bridge."
::= { bridgeMacSearchEntry 3 }
bridgeMacSearchVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to search all the MAC addresses in a specific VLAN."
::= { bridgeMacSearchEntry 4 }
bridgeMacSearchPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to search all the MAC addresses in a specific port."
::= { bridgeMacSearchEntry 5 }
bridgeMacSearchCmdStatus OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
startSearch (2),
macSearching (3),
macFound (4),
macNoFound (5),
failed (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the search process:
notApplicable - used as default value
startSearch - initiate search process
macSearching - search is in process
macFound - the search was end with a result
macNoFound - the search was end without a result
failed - there was a failed in the process ."
::= { bridgeMacSearchEntry 6 }
bridgeMacResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF BridgeMacResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holds the result of the searching MAC addresses
initiated in table bridgeMacTable."
::= { radBridgeStatus 3 }
bridgeMacResultEntry OBJECT-TYPE
SYNTAX BridgeMacResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes an entry in the bridgeMacResultTable."
INDEX { bridgeMacResultBridgeIdx, bridgeMacResultVlan , bridgeMacResultMacAddress }
::= { bridgeMacResultTable 1 }
BridgeMacResultEntry ::= SEQUENCE {
bridgeMacResultBridgeIdx Unsigned32,
bridgeMacResultVlan Unsigned32,
bridgeMacResultMacAddress MacAddress,
bridgeMacResultPort Unsigned32,
bridgeMacResultCmdStatus INTEGER
}
bridgeMacResultBridgeIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bridge index."
::= { bridgeMacResultEntry 1 }
bridgeMacResultVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Mac address on a VLAN that was searched."
::= { bridgeMacResultEntry 2 }
bridgeMacResultMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Mac address that was searched."
::= { bridgeMacResultEntry 3 }
bridgeMacResultPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mac address on a port that was searched."
::= { bridgeMacResultEntry 4 }
bridgeMacResultCmdStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
learned(3),
self(4),
mgmt(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the Mac address, see ieee8021QBridgeTpFdbStatus for details."
::= { bridgeMacResultEntry 5 }
END
View Git Blame Copy Permalink