WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/pandacom/SPEED-AMP-MIB

1650 lines
41 KiB
Plaintext
Raw Blame History

SPEED-AMP-MIB DEFINITIONS ::= BEGIN
--*****************************************************************************************
--***** Version History ***************************************************************
--=========================================================================================
--V0.0 14.04.2009 GD: Erste Version SPEED-AMP-MIB
--V1.0 18.06.2009 GD: ueberarbeitete Version Als Referenz für Implementierung in SNMP
--V1.1 25.08.2009 GD: Alias Werte hinzugefügt, Umrechnungswerte für ananloge Parameter ergaenzt
-- Supported Modules:
-- SPEED-AMPLIFIER
--*****************************************************************************************
IMPORTS
DisplayString FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212
TRAP-TYPE FROM RFC-1215
enterprises, IpAddress, TimeTicks, MODULE-IDENTITY FROM SNMPv2-SMI
PanDacom FROM PanDacom-MIB
nmSPEEDCARRIER, amplifier FROM SPEEDCARRIER-MIB
; -- END of IMPORTS
--*******************************************************************
speedAmp MODULE-IDENTITY
LAST-UPDATED "1312120000Z"
ORGANIZATION "Pan Dacom Direkt GmbH"
CONTACT-INFO
"Pan Dacom Direkt GmbH
Dreieich Plaza 1B
63303 Dreieich
Germany
Tel. : +49 6103/932-333
Fax. : +49 6103/932-444
email: kontakt@pandacomdirekt.de
web : www.pandacomdirekt.de"
DESCRIPTION "Revision 1.0"
REVISION "1312120000Z"
DESCRIPTION "Revision 5.2.0
- change of table indexes
- corrective actions "
::= { amplifier 1 }
--*******************************************************************
speedAmpModuleOverviewTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpModuleOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Speed-Amplifier Module Overview Table"
::= { speedAmp 1 }
speedAmpModuleOverviewEntry OBJECT-TYPE
SYNTAX SpeedAmpModuleOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module Overview Entries"
INDEX { speedAmpMSlot }
::= { speedAmpModuleOverviewTable 1 }
SpeedAmpModuleOverviewEntry ::=
SEQUENCE
{
speedAmpMSlot INTEGER,
speedAmpMDevice INTEGER,
speedAmpMStatus INTEGER,
speedAmpMSysUpTime TimeTicks,
speedAmpMTemp INTEGER,
speedAmpMAlarmState INTEGER,
speedAmpMSerialNumber DisplayString
}
speedAmpMSlot OBJECT-TYPE
SYNTAX INTEGER (1..17)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Slot number in Carrier"
::= { speedAmpModuleOverviewEntry 2 }
speedAmpMDevice OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
other(1),
preamp14(2),
booster17(3),
booster17OSC(4),
booster23OSC(5),
inline17(6),
inline23(7),
ramanMaster10(8),
ramanMaster15(9),
ramanSlave10(10),
ramanSlave15(11),
ramanStandalone10(12),
ramanStandalone15(13),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Module DeviceType"
::= { speedAmpModuleOverviewEntry 3 }
speedAmpMStatus OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
running (1),
resetSoftware (2),
resetConfig (3),
resetCAN (4),
resetHardware (5),
resetStatistic(6),
unknown (255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset States of Module"
::= { speedAmpModuleOverviewEntry 4 }
speedAmpMSysUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System Up Time in Seconds"
::= { speedAmpModuleOverviewEntry 5 }
speedAmpMTemp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Temperature"
::= { speedAmpModuleOverviewEntry 6 }
speedAmpMAlarmState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
noAlarm (1),
activeAlarms (2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Alarm States, if there are active see Event-Table"
::= { speedAmpModuleOverviewEntry 7 }
speedAmpMSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Modules Serial Number"
::= { speedAmpModuleOverviewEntry 8 }
-- *********************************
-- speedAmpModuleImagesOverview
speedAmpModuleImagesOverviewTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpModuleImagesOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER Module Images Table"
::= { speedAmp 2 }
speedAmpModuleImagesOverviewEntry OBJECT-TYPE
SYNTAX SpeedAmpModuleImagesOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module Images Overview Entries"
INDEX { speedAmpMSlot }
::= { speedAmpModuleImagesOverviewTable 1 }
SpeedAmpModuleImagesOverviewEntry ::=
SEQUENCE
{
speedAmpMSlot INTEGER,
speedAmpSwKernelImage DisplayString,
speedAmpSwAppImage DisplayString,
speedAmpSwUploadStatus INTEGER,
speedAmpSwUpdateStatus INTEGER,
speedAmpHwVersion DisplayString
}
speedAmpSwKernelImage OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of Bootimage"
::= { speedAmpModuleImagesOverviewEntry 3 }
speedAmpSwAppImage OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of Application Image1"
::= { speedAmpModuleImagesOverviewEntry 4 }
speedAmpSwUploadStatus OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
ready (1),
startUpload (2),
uploadActive (3),
uploadFailure (4),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Control and Status of UploadProcedure"
::= { speedAmpModuleImagesOverviewEntry 5 }
speedAmpSwUpdateStatus OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
idle (1),
activateKernel (2),
activateApplication (3),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"activates SW-Image after netxt reset"
::= { speedAmpModuleImagesOverviewEntry 6 }
speedAmpHwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of Hardware Version"
::= { speedAmpModuleImagesOverviewEntry 7 }
-- *********************************
-- SpeedAmpModuleBoardConfig
speedAmpModuleBoardConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpModuleBoardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER Module config Table"
::= { speedAmp 3 }
speedAmpModuleBoardConfigEntry OBJECT-TYPE
SYNTAX SpeedAmpModuleBoardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module Overview Entries"
INDEX { speedAmpMSlot }
::= { speedAmpModuleBoardConfigTable 1 }
SpeedAmpModuleBoardConfigEntry ::=
SEQUENCE
{
speedAmpMSlot INTEGER,
speedAmpTemperatureHighWarning INTEGER,
speedAmpTemperatureHighAlarm INTEGER
}
speedAmpTemperatureHighWarning OBJECT-TYPE
SYNTAX INTEGER(5..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Warning Level for Module ambient Temperature (5 - 60 degree Celsius)"
::= { speedAmpModuleBoardConfigEntry 3 }
speedAmpTemperatureHighAlarm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm Level for Module ambient Temperature"
::= { speedAmpModuleBoardConfigEntry 4 }
-- ****************************
speedAmpModuleNetworkParameterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpModuleNetworkParameterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER Module Network Parameter Table"
::= { speedAmp 4 }
speedAmpModuleNetworkParameterEntry OBJECT-TYPE
SYNTAX SpeedAmpModuleNetworkParameterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module Network Parameter Entries"
INDEX { speedAmpMSlot }
::= { speedAmpModuleNetworkParameterTable 1 }
SpeedAmpModuleNetworkParameterEntry ::=
SEQUENCE
{
speedAmpMSlot INTEGER,
speedAmpMNetworkAdress IpAddress,
speedAmpMNetworkMask IpAddress,
speedAmpMNetworkGateway IpAddress,
speedAmpMNetworkSnmpTrapSink1 IpAddress,
speedAmpMNetworkSnmpTrapSink2 IpAddress,
speedAmpMNetworkSnmpTrapSink3 IpAddress,
speedAmpMNetworkSnmpTrapSink4 IpAddress,
speedAmpMNetworkSnmpTrapSink5 IpAddress,
speedAmpMNetworkSnmpReadCommunity DisplayString,
speedAmpMNetworkSnmpWriteCommunity DisplayString,
speedAmpMNetworkSysLocation DisplayString,
speedAmpMNetworkSnmpAgentStatus INTEGER,
speedAmpMNetworkHttpServerStatus INTEGER,
speedAmpMNetworkSysname DisplayString,
speedAmpNNetworkSyscontact DisplayString,
speedAmpMNetworkUserTimeout INTEGER,
speedAmpMNetworkAccess INTEGER
}
speedAmpMNetworkAdress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP-address of the Ethernet interface"
DEFVAL { 'c0a80065'H } -- 192.168.0.101
::= { speedAmpModuleNetworkParameterEntry 3 }
speedAmpMNetworkMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP-netmask of the Ethernet interface"
DEFVAL { 'ffffff00'H } -- 255.255.255.0
::= { speedAmpModuleNetworkParameterEntry 4 }
speedAmpMNetworkGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default gateway of the Ethernet interface"
DEFVAL { '00000000'H }
::= { speedAmpModuleNetworkParameterEntry 5 }
speedAmpMNetworkSnmpTrapSink1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trap destination 1 for SNMP traps. Clear value is 0.0.0.0"
DEFVAL { '00000000'H }
::= { speedAmpModuleNetworkParameterEntry 6 }
speedAmpMNetworkSnmpTrapSink2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trap destination 2 for SNMP traps. Clear value is 0.0.0.0"
DEFVAL { '00000000'H }
::= { speedAmpModuleNetworkParameterEntry 7 }
speedAmpMNetworkSnmpTrapSink3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trap destination 3 for SNMP traps. Clear value is 0.0.0.0"
DEFVAL { '00000000'H }
::= { speedAmpModuleNetworkParameterEntry 8 }
speedAmpMNetworkSnmpTrapSink4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trap destination 4 for SNMP traps. Clear value is 0.0.0.0"
DEFVAL { '00000000'H }
::= { speedAmpModuleNetworkParameterEntry 9 }
speedAmpMNetworkSnmpTrapSink5 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trap destination 5 for SNMP traps. Clear value is 0.0.0.0"
DEFVAL { '00000000'H }
::= { speedAmpModuleNetworkParameterEntry 10 }
speedAmpMNetworkSnmpReadCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP read community name"
DEFVAL { "public" }
::= { speedAmpModuleNetworkParameterEntry 11 }
speedAmpMNetworkSnmpWriteCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP write community name"
DEFVAL { "private" }
::= { speedAmpModuleNetworkParameterEntry 12 }
speedAmpMNetworkSysLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"location of the SPEED-Amplifier System"
DEFVAL { "serverroom" }
::= { speedAmpModuleNetworkParameterEntry 13 }
speedAmpMNetworkSnmpAgentStatus OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
down(1),
up(2),
notImplemented(254),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Snmp-Agent operational status"
::= { speedAmpModuleNetworkParameterEntry 14 }
speedAmpMNetworkHttpServerStatus OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
down(1),
up(2),
notImplemented(254),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Snmp-Agent operational status"
::= { speedAmpModuleNetworkParameterEntry 15 }
speedAmpMNetworkSysname OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"location of the SPEED-Amplifier System"
DEFVAL { "serverroom" }
::= { speedAmpModuleNetworkParameterEntry 16 }
speedAmpNNetworkSyscontact OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"location of the SPEED-Amplifier System"
DEFVAL { "serverroom" }
::= { speedAmpModuleNetworkParameterEntry 17 }
speedAmpMNetworkUserTimeout OBJECT-TYPE
SYNTAX INTEGER (120..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command line access mode"
::= { speedAmpModuleNetworkParameterEntry 18 }
speedAmpMNetworkAccess OBJECT-TYPE
SYNTAX INTEGER
{
notavailable(0),
off(1),
telnet(2),
ssh2(3),
notImplemented(254),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command line access mode"
::= { speedAmpModuleNetworkParameterEntry 19 }
-- ****************************
-- SpeedAmpModuleEthPortOverview
speedAmpModuleEthPortOverviewTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpModuleEthPortOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER Module Ethernet port overview table"
::= { speedAmp 5 }
speedAmpModuleEthPortOverviewEntry OBJECT-TYPE
SYNTAX SpeedAmpModuleEthPortOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"port overview entries"
INDEX { speedAmpIndex }
::= { speedAmpModuleEthPortOverviewTable 1 }
SpeedAmpModuleEthPortOverviewEntry ::=
SEQUENCE
{
speedAmpIndex INTEGER,
speedAmpMEthSlot INTEGER,
speedAmpMEthPort INTEGER,
speedAmpMEthPortname DisplayString,
speedAmpMEthPortAdminState INTEGER,
speedAmpMEthPortOperState INTEGER,
speedAmpMEthPortMode INTEGER,
speedAmpMEthSFPState INTEGER,
speedAmpMEthPortRxPackets INTEGER,
speedAmpMEthPortTxPackets INTEGER,
speedAmpMEthErrors INTEGER
}
speedAmpIndex OBJECT-TYPE
SYNTAX INTEGER (0..1800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SPEED AMP Module Index"
::= { speedAmpModuleEthPortOverviewEntry 1 }
speedAmpMEthSlot OBJECT-TYPE
SYNTAX INTEGER (1..17)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of Module Eth port"
::= { speedAmpModuleEthPortOverviewEntry 2 }
speedAmpMEthPort OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of Module Eth port"
::= { speedAmpModuleEthPortOverviewEntry 3 }
speedAmpMEthPortname OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port description or port name."
::= { speedAmpModuleEthPortOverviewEntry 4 }
speedAmpMEthPortAdminState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
adminDown(1),
adminUp(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"administrativ port status"
::= { speedAmpModuleEthPortOverviewEntry 5 }
speedAmpMEthPortOperState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
down(1),
up(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Eth Port operational status"
::= { speedAmpModuleEthPortOverviewEntry 6 }
speedAmpMEthPortMode OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
autoneg(1),
hdx10(2),
fdx10(3),
hdx100(4),
fdx100(5),
hdlc(6),
rmii(7),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Eth Port Configuration Mode."
::= { speedAmpModuleEthPortOverviewEntry 7 }
speedAmpMEthSFPState OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
sfpOperDown(1),
sfpOperUp(2),
sfpTxFault(3),
sfpInstalled(4),
sfpRemoved(5),
sfpNotPossible(6),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP installed / alarm status"
::= { speedAmpModuleEthPortOverviewEntry 8 }
speedAmpMEthPortRxPackets OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Eth Port received Packets"
::= { speedAmpModuleEthPortOverviewEntry 9 }
speedAmpMEthPortTxPackets OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Eth Port transmitted Packets"
::= { speedAmpModuleEthPortOverviewEntry 10 }
speedAmpMEthErrors OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module Eth Port received Errors"
::= { speedAmpModuleEthPortOverviewEntry 11 }
--********************************************
-- SpeedAmpModuleEthPortConfig
speedAmpMEthPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpMEthPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-Amplifier Module Ethernet port config table"
::= { speedAmp 6 }
speedAmpMEthPortConfigEntry OBJECT-TYPE
SYNTAX SpeedAmpMEthPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"port config Entries"
INDEX { speedAmpIndex }
::= { speedAmpMEthPortConfigTable 1 }
SpeedAmpMEthPortConfigEntry ::=
SEQUENCE
{
speedAmpMEthSlot INTEGER,
speedAmpMEthPort INTEGER,
speedAmpMEthPCfgAdminConfig INTEGER,
speedAmpMEthPCfgDescription DisplayString,
speedAmpMEthPCfgMode INTEGER,
speedAmpMEthPCfgAlarmReporting INTEGER,
speedAmpMEthPCfgAlarmSchedule INTEGER
}
speedAmpMEthPCfgAdminConfig OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
adminDown(1),
adminUp(2),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Module Ethernet port administrative configuration. Only ports 1..4 are configurable."
::= { speedAmpMEthPortConfigEntry 4 }
speedAmpMEthPCfgDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Module Ethernet port description. Only ports 1..3 are configurable."
::= { speedAmpMEthPortConfigEntry 5 }
speedAmpMEthPCfgMode OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
autoneg(1),
fix10HDX(2),
fix10FDX(3),
fix100HDX(4),
fix100FDX(5),
fixhdlc(6),
fixrmii(7),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Module Ethernet Port Configuration. Only ports 1 and 2 are configurable."
::= { speedAmpMEthPortConfigEntry 6 }
speedAmpMEthPCfgAlarmReporting OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
alarmReportingEnabled(1),
alarmReportingDisabledbySchedule(2),
alarmReportingDisabledPermanent(3),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet port alarm deactivation. Only applicable for user SFP!"
::= { speedAmpMEthPortConfigEntry 7 }
speedAmpMEthPCfgAlarmSchedule OBJECT-TYPE
SYNTAX INTEGER (0..1200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet port alarm deactivation schedule. Value in hours. After this time has elapsed, the alarms are active again. Only applicable for user SFP!"
::= { speedAmpMEthPortConfigEntry 8 }
--***************************************
-- SpeedAmpModuleGeneralSFPInfos
speedAmpModuleGeneralSFPInfosTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpModuleGeneralSFPInfosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER SFP general information table"
::= { speedAmp 7 }
speedAmpModuleGeneralSFPInfosEntry OBJECT-TYPE
SYNTAX SpeedAmpModuleGeneralSFPInfosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module SFP general information Entries"
INDEX { speedAmpIndex }
::= { speedAmpModuleGeneralSFPInfosTable 1 }
SpeedAmpModuleGeneralSFPInfosEntry ::=
SEQUENCE
{
speedAmpMSFPSlot INTEGER,
speedAmpMSFPPort INTEGER,
speedAmpSFPVendorName DisplayString,
speedAmpSFPPartNumber DisplayString,
speedAmpSFPSerialNumber DisplayString,
speedAmpSFPWavelength INTEGER,
speedAmpSFPDMIMode INTEGER,
speedAmpSFPPortType INTEGER
}
speedAmpMSFPSlot OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP slot"
::= { speedAmpModuleGeneralSFPInfosEntry 2 }
speedAmpMSFPPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP port"
::= { speedAmpModuleGeneralSFPInfosEntry 3 }
speedAmpSFPVendorName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP vendor name"
::= { speedAmpModuleGeneralSFPInfosEntry 4 }
speedAmpSFPPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP part number"
::= { speedAmpModuleGeneralSFPInfosEntry 5 }
speedAmpSFPSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP serial number"
::= { speedAmpModuleGeneralSFPInfosEntry 6 }
speedAmpSFPWavelength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP wavelength in units of 100*(value of 1nm)"
::= { speedAmpModuleGeneralSFPInfosEntry 7 }
speedAmpSFPDMIMode OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
sff8472V93(1),
sff8472V95(2),
sff8472V102(3),
sffVother(4),
notImplemented(254),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP DMI Type "
::= { speedAmpModuleGeneralSFPInfosEntry 8 }
speedAmpSFPPortType OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
osc(1),
user(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP Port Type "
::= { speedAmpModuleGeneralSFPInfosEntry 9 }
-- ****************************************
-- SpeedAmpModuleSFPMessurement
speedAmpModuleSFPMessurementTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpModuleSFPMessurementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER SFP messurement table"
::= { speedAmp 8 }
speedAmpModuleSFPMessurementEntry OBJECT-TYPE
SYNTAX SpeedAmpModuleSFPMessurementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SFP messurement Entries"
INDEX { speedAmpIndex }
::= { speedAmpModuleSFPMessurementTable 1 }
SpeedAmpModuleSFPMessurementEntry ::=
SEQUENCE
{
speedAmpMSFPSlot INTEGER,
speedAmpMSFPPort INTEGER,
speedAmpMSFPRXPower INTEGER,
speedAmpMSFPTXPower INTEGER,
speedAmpMSFPTXBias INTEGER,
speedAmpMSFPTemp INTEGER,
speedAmpMSFPPortType INTEGER
}
speedAmpMSFPRXPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP optical receive power in units of 10*(value of 1dbm)"
::= { speedAmpModuleSFPMessurementEntry 4 }
speedAmpMSFPTXPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP optical transmit power in units of 10*(value of 1dbm)"
::= { speedAmpModuleSFPMessurementEntry 5 }
speedAmpMSFPTXBias OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP TX Bias in units of 1mA "
::= { speedAmpModuleSFPMessurementEntry 6 }
speedAmpMSFPTemp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP temperature in units of 1degree Centigrade"
::= { speedAmpModuleSFPMessurementEntry 7 }
speedAmpMSFPPortType OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
osc(1),
user(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP Port Type "
::= { speedAmpModuleSFPMessurementEntry 8 }
--***************************************
-- SpeedAmpDeviceGeneralInfos
speedAmpDevGeneralInfosTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpDevGeneralInfosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER Amplifier device general information table"
::= { speedAmp 9 }
speedAmpDevGeneralInfosEntry OBJECT-TYPE
SYNTAX SpeedAmpDevGeneralInfosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Amplifier device general information Entries"
INDEX { speedAmpMSlot }
::= { speedAmpDevGeneralInfosTable 1 }
SpeedAmpDevGeneralInfosEntry ::=
SEQUENCE
{
speedAmpMSlot INTEGER,
speedAmpDevSerialNumber DisplayString,
speedAmpDevConfiguration INTEGER,
speedAmpDevModuletype INTEGER,
speedAmpDevVersion DisplayString,
speedAmpDevVendor INTEGER,
speedAmpDevLinePortDescription DisplayString,
speedAmpDevClientPortDescription DisplayString
}
speedAmpDevSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Device Serial Number"
::= { speedAmpDevGeneralInfosEntry 3 }
speedAmpDevConfiguration OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
confConstantPower(3),
confConstantGain(4),
confOFF(5),
confOther(6),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Device Configuration"
::= { speedAmpDevGeneralInfosEntry 4 }
speedAmpDevModuletype OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
other(1),
preamp14(2),
booster17(3),
booster17OSC(4),
booster23OSC(5),
inline17(6),
inline23(7),
ramanMaster10(8),
ramanMaster15(9),
ramanSlave10(10),
ramanSlave15(11),
ramanStandalone10(12),
ramanStandalone15(13),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Device Type"
::= { speedAmpDevGeneralInfosEntry 5 }
speedAmpDevVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Device Version Code "
::= { speedAmpDevGeneralInfosEntry 6 }
speedAmpDevVendor OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Device Vendor Code"
::= { speedAmpDevGeneralInfosEntry 7 }
speedAmpDevLinePortDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Optical Line Port Description String "
::= { speedAmpDevGeneralInfosEntry 8 }
speedAmpDevClientPortDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Optical Client Port Description String "
::= { speedAmpDevGeneralInfosEntry 9 }
--***************************************
-- SpeedAmpDeviceOverview
speedAmpDevOverviewTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpDevOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER Amplifier device Overview table"
::= { speedAmp 10 }
speedAmpDevOverviewEntry OBJECT-TYPE
SYNTAX SpeedAmpDevOverviewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Amplifier device Overview Entries"
INDEX { speedAmpMSlot }
::= { speedAmpDevOverviewTable 1 }
SpeedAmpDevOverviewEntry ::=
SEQUENCE
{
speedAmpMSlot INTEGER,
speedAmpDevGain INTEGER,
speedAmpDevPumpCurrent INTEGER,
speedAmpDevPumpPower INTEGER,
speedAmpDevMode INTEGER,
speedAmpDevModeShutdown INTEGER,
speedAmpDevLosInputThreshold INTEGER,
speedAmpDevHighOutputThreshold INTEGER,
speedAmpDevAlarm INTEGER,
speedAmpDevCaseTemperature INTEGER,
speedAmpDevClientInputPower INTEGER,
speedAmpDevLineOutputPower INTEGER,
speedAmpDevBackreflectionThreshold INTEGER,
speedAmpDevShutdownThreshold INTEGER,
speedAmpDevBackreflectionRatio INTEGER
}
speedAmpDevGain OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier optical Gain in units of 100*(value of 1db)"
::= { speedAmpDevOverviewEntry 3 }
speedAmpDevPumpCurrent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Pump Current in units of 10*(value of 1mA)"
::= { speedAmpDevOverviewEntry 4 }
speedAmpDevPumpPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Pump Power in units of 10*(value of 1mW)"
::= { speedAmpDevOverviewEntry 5 }
speedAmpDevMode OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
confConstantPower(3),
confConstantGain(4),
confOFF(5),
confOther(6),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Working Mode"
::= { speedAmpDevOverviewEntry 6 }
speedAmpDevModeShutdown OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
cfgAutoLaserShutdownOff (1),
cfgAutoLaserShutdownOn (2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Shutdown Mode"
::= { speedAmpDevOverviewEntry 7 }
speedAmpDevLosInputThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Loss of Input Power Threshold in units of 100*(value of 1dbm). Range: -45.00 to 0.00 dBm"
::= { speedAmpDevOverviewEntry 8 }
speedAmpDevHighOutputThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Output High Power Threshold in units of 100*(value of 1dbm)"
::= { speedAmpDevOverviewEntry 9 }
speedAmpDevAlarm OBJECT-TYPE
SYNTAX INTEGER
{
noAlarm (0),
unknown (254)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Alarm Status - Error code from amp module"
::= { speedAmpDevOverviewEntry 10 }
speedAmpDevCaseTemperature OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier module case temperature (value of 1degree Centigrade)"
::= { speedAmpDevOverviewEntry 11 }
speedAmpDevClientInputPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier optical client Input Power in units of 100*(value of 1dbm)"
::= { speedAmpDevOverviewEntry 12 }
speedAmpDevLineOutputPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier optical line Output Power in units of 100*(value of 1dbm)"
::= { speedAmpDevOverviewEntry 13 }
speedAmpDevBackreflectionThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this value is only available for RAMAN Amplifier"
::= { speedAmpDevOverviewEntry 14 }
speedAmpDevShutdownThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this value is only available for RAMAN Amplifier"
::= { speedAmpDevOverviewEntry 15 }
speedAmpDevBackreflectionRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this value is only available for RAMAN Amplifier"
::= { speedAmpDevOverviewEntry 16 }
-- *********************************
-- SpeedAmpDeviceConfig
speedAmpDevConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpDevConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER Dev Config Table"
::= { speedAmp 11 }
speedAmpDevConfigEntry OBJECT-TYPE
SYNTAX SpeedAmpDevConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Device Configuration Entries"
INDEX { speedAmpMSlot }
::= { speedAmpDevConfigTable 1 }
SpeedAmpDevConfigEntry ::=
SEQUENCE
{
speedAmpMSlot INTEGER,
speedAmpDevCfgGainValue INTEGER,
speedAmpDevCfgPoutValue INTEGER,
speedAmpDevCfgPumpPwr INTEGER,
speedAmpDevCfgModeValue INTEGER,
speedAmpDevCfgPowerSafetyModeValue INTEGER,
speedAmpDevCfgLosInputThresholdValue INTEGER,
speedAmpDevCfgLinePortDescription DisplayString,
speedAmpDevCfgClientPortDescription DisplayString,
speedAmpDevCfgAlarmReporting INTEGER,
speedAmpDevCfgAlarmSchedule INTEGER,
speedAmpDevCfgBackreflectionThresholdValue INTEGER
}
speedAmpDevCfgGainValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amplifier optical Gain Value in units of 100*(value of 1db)"
::= { speedAmpDevConfigEntry 3}
speedAmpDevCfgPoutValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amplifier Optical Output Power in units of 100*(value of 1dbm)"
::= { speedAmpDevConfigEntry 4}
speedAmpDevCfgPumpPwr OBJECT-TYPE
SYNTAX INTEGER (0..660)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Only applicable for RAMAN amplifiers. Pump power in
units of mW. For RAMAN-10 amplifiers the valid range
is 0..440 mW."
::= { speedAmpDevConfigEntry 5}
speedAmpDevCfgModeValue OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
confConstantPower(3),
confConstantGain(4),
confOFF(5),
confOther(6),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amplifier Working Mode"
::= { speedAmpDevConfigEntry 6}
speedAmpDevCfgPowerSafetyModeValue OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable (0),
cfgAutoLaserShutdownOff (1),
cfgAutoLaserShutdownOn (2),
unknown (255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amplifier Power Safety Mode. On EDFA amplifiers an power shutdown will be forced, if the input threshold is blow the limit. On RAMAN modules the power will be reduced, if the backreflectioon is to high."
::= { speedAmpDevConfigEntry 7}
speedAmpDevCfgLosInputThresholdValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amplifier optical Input Value LOS Threshold in units of 100*(value of 1dbm)"
::= { speedAmpDevConfigEntry 8}
speedAmpDevCfgLinePortDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amplifier Optical Line Port Description String "
::= { speedAmpDevConfigEntry 9}
speedAmpDevCfgClientPortDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amplifier Optical Client Port Description String "
::= { speedAmpDevConfigEntry 10}
speedAmpDevCfgAlarmReporting OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
alarmReportingEnabled(1),
alarmReportingDisabledbySchedule(2),
alarmReportingDisabledPermanent(3),
unknown(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amp module alarm deactivation"
::= { speedAmpDevConfigEntry 11 }
speedAmpDevCfgAlarmSchedule OBJECT-TYPE
SYNTAX INTEGER (0..1200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amp module alarm deactivation schedule. Value in hours. After this time has elapsed, the alarms are active again."
::= { speedAmpDevConfigEntry 12 }
speedAmpDevCfgBackreflectionThresholdValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"this value is only available for RAMAN Amplifier"
::= { speedAmpDevConfigEntry 13 }
--***************************************
-- SpeedAmpDeviceAlarmTable
speedAmpDevAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpDevAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER Amplifier device Alarm table"
::= { speedAmp 12 }
speedAmpDevAlarmEntry OBJECT-TYPE
SYNTAX SpeedAmpDevAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Amplifier device Alarm Entries"
INDEX { speedAmpMSlot }
::= { speedAmpDevAlarmTable 1 }
SpeedAmpDevAlarmEntry ::=
SEQUENCE
{
speedAmpMSlot INTEGER,
speedAmpDevAlarmOpticalInput INTEGER,
speedAmpDevAlarmOpticalOutput INTEGER,
speedAmpDevAlarmModuleTemperature INTEGER,
speedAmpDevAlarmPumpTemperature INTEGER,
speedAmpDevAlarmPumpDriveCurrent INTEGER,
speedAmpDevAlarmSupplyVoltage INTEGER,
speedAmpDevAlarmAutoshutdown INTEGER,
speedAmpDevAlarmSecurityMonitor INTEGER,
speedAmpDevAlarmBackref INTEGER
}
speedAmpDevAlarmOpticalInput OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable (0),
noAlarm(1),
activeAlarm(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier optical Input Value is under specified Threshold Value"
::= { speedAmpDevAlarmEntry 3 }
speedAmpDevAlarmOpticalOutput OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable (0),
noAlarm(1),
activeAlarm(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier optical Input Value is over specified Threshold Value"
::= { speedAmpDevAlarmEntry 4 }
speedAmpDevAlarmModuleTemperature OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable (0),
noAlarm(1),
activeAlarm(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Temperature Value is over specified Threshold Value"
::= { speedAmpDevAlarmEntry 5 }
speedAmpDevAlarmPumpTemperature OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable (0),
noAlarm(1),
activeAlarm(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Pump Temperature is out of specified Range"
::= { speedAmpDevAlarmEntry 6 }
speedAmpDevAlarmPumpDriveCurrent OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable (0),
noAlarm(1),
activeAlarm(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Pump Drive Current is out of specified Range"
::= { speedAmpDevAlarmEntry 7 }
speedAmpDevAlarmSupplyVoltage OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable (0),
noAlarm(1),
activeAlarm(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Supply voltage is out of specified Range"
::= { speedAmpDevAlarmEntry 8 }
speedAmpDevAlarmAutoshutdown OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable (0),
noAlarm(1),
activeAlarm(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Device Autoshutdown activated"
::= { speedAmpDevAlarmEntry 9 }
speedAmpDevAlarmSecurityMonitor OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
secmonready(1),
secmonhalted(2),
secmonfailure(3),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of SecurityMonitor"
::= { speedAmpDevAlarmEntry 10 }
speedAmpDevAlarmBackref OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable (0),
noAlarm(1),
activeAlarm(2),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amplifier Device Alarm Backreflection"
::= { speedAmpDevAlarmEntry 11 }
--***************************************
-- SpeedAmpModuleSFPAlarmTable
speedAmpModuleSFPAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpeedAmpModuleSFPAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SPEED-AMPLIFIER Module SFP Alarm table"
::= { speedAmp 13 }
speedAmpModuleSFPAlarmEntry OBJECT-TYPE
SYNTAX SpeedAmpModuleSFPAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module SFP Alarm Entries"
INDEX { speedAmpIndex }
::= { speedAmpModuleSFPAlarmTable 1 }
SpeedAmpModuleSFPAlarmEntry ::=
SEQUENCE
{
speedAmpMSFPSlot INTEGER,
speedAmpMSFPPort INTEGER,
speedAmpMSFPRxPowerAlarm INTEGER,
speedAmpMSFPTxPowerAlarm INTEGER,
speedAmpMSFPTxBiasAlarm INTEGER,
speedAmpMSFPTemperatureAlarm INTEGER,
speedAmpMSFPDWDMAlarm INTEGER
}
speedAmpMSFPRxPowerAlarm OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
noAlarm(1),
rxLowAlarm(2),
rxHighAlarm(3),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module SFP optical Rx Power is out of specified Range"
::= { speedAmpModuleSFPAlarmEntry 4 }
speedAmpMSFPTxPowerAlarm OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
noAlarm(1),
activeAlarm(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module SFP optical Tx Power is out of specified Range"
::= { speedAmpModuleSFPAlarmEntry 5 }
speedAmpMSFPTxBiasAlarm OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
noAlarm(1),
activeAlarm(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module SFP Bias Current is out of specified Range"
::= { speedAmpModuleSFPAlarmEntry 6 }
speedAmpMSFPTemperatureAlarm OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
noAlarm(1),
highWarning(2),
highAlarm(3),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module SFP Temperature is out of specified Range"
::= { speedAmpModuleSFPAlarmEntry 7 }
speedAmpMSFPDWDMAlarm OBJECT-TYPE
SYNTAX INTEGER
{
notAvailiable(0),
noAlarm(1),
activeAlarm(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DWDM SFP - DWDM Alarm"
::= { speedAmpModuleSFPAlarmEntry 8 }
END
View Git Blame Copy Permalink