WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/oracle/SUN-ILOM-CONTROL-MIB

4210 lines
149 KiB
Plaintext
Raw Blame History

SUN-ILOM-CONTROL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
IpAddress,
Integer32,
Unsigned32,
enterprises FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
RowStatus,
TruthValue,
DisplayString,
DateAndTime FROM SNMPv2-TC
OBJECT-GROUP FROM SNMPv2-CONF
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
sun OBJECT IDENTIFIER ::= { enterprises 42 }
products OBJECT IDENTIFIER ::= { sun 2 }
ilom OBJECT IDENTIFIER ::= { products 175 }
ilomCtrlMIB MODULE-IDENTITY
LAST-UPDATED "201006110000Z" -- June 11, 2010
ORGANIZATION "Oracle Corporation"
CONTACT-INFO "Oracle Corporation
500 Oracle Parkway
Redwood Shores, CA 95065
U.S.A.
http://www.oracle.com"
DESCRIPTION
"SUN-ILOM-CONTROL-MIB.mib Version 3.0
Copyright (c) 2005, 2010, Oracle and/or its affiliates.
All rights reserved.
This MIB controls all Sun Integrated Lights Out Management
devices."
REVISION
"201006110000Z" -- June 11, 2010
DESCRIPTION
"Add support for the SPARC diagnostic 'HW change' trigger"
REVISION
"201006080000Z" -- June 8, 2010
DESCRIPTION
"Add ActiveDirectory parameter ilomCtrlActiveDirStrictCredentialErrorEnabled"
REVISION
"200903300000Z" -- March 30, 2009
DESCRIPTION
"Add LdapSsl optional User Mapping parameters."
REVISION
"200903030000Z" -- March 3, 2009
DESCRIPTION
"Add ActiveDirectory parameter ilomCtrlActiveDirExpSearchEnabled."
REVISION
"200805150000Z" -- May 15, 2008
DESCRIPTION
"Version 3.0
Released with ILOM version 3.0
Added alert event class/type filtering
Added Telemetry Harness Daemon (THD)
Added dns-locator objects and certificate params for ActiveDirectory
Added ilomCtrlLdapSsl
Unify POST knobs for Volume and Enterprise Products
Added BackupAndRestore configuration XML file support
Added DNS configuration support
Added factory to ILOMCtrlResetToDefaultsAction
Added 'other' values to several TCs
Added ilomCtrlSPARCHostHypervisorVersion
Added ilomCtrlSPARCHostSysFwVersion
Added ilomCtrlSPARCHostSendBreakAction
Added sideband management support"
REVISION
"200804110000Z" -- April 11, 2008
DESCRIPTION
"Add destinationport for use with trap type alerts.
Remove range from ilomCtrlEventLogRecordID."
REVISION
"200702200000Z" -- February 20, 2007
DESCRIPTION
"Version 2.0"
REVISION
"200612150000Z" -- December 15, 2006
DESCRIPTION
"Version: 1.1
Released with ILOM version 1.1.5"
REVISION
"200512190000Z" -- December 19, 2005
DESCRIPTION
"Version: 0.7
Initial Release"
::= { ilom 102 }
ilomCtrlClients OBJECT IDENTIFIER ::= { ilomCtrlMIB 1 }
ilomCtrlServices OBJECT IDENTIFIER ::= { ilomCtrlMIB 2 }
ilomCtrlNetwork OBJECT IDENTIFIER ::= { ilomCtrlMIB 3 }
ilomCtrlUsers OBJECT IDENTIFIER ::= { ilomCtrlMIB 4 }
ilomCtrlSessions OBJECT IDENTIFIER ::= { ilomCtrlMIB 5 }
ilomCtrlFirmwareMgmt OBJECT IDENTIFIER ::= { ilomCtrlMIB 6 }
ilomCtrlLogs OBJECT IDENTIFIER ::= { ilomCtrlMIB 7 }
ilomCtrlAlerts OBJECT IDENTIFIER ::= { ilomCtrlMIB 8 }
ilomCtrlClock OBJECT IDENTIFIER ::= { ilomCtrlMIB 9 }
ilomCtrlSerial OBJECT IDENTIFIER ::= { ilomCtrlMIB 10 }
ilomCtrlPowerReset OBJECT IDENTIFIER ::= { ilomCtrlMIB 11 }
ilomCtrlRedundancy OBJECT IDENTIFIER ::= { ilomCtrlMIB 12 }
ilomCtrlPolicy OBJECT IDENTIFIER ::= { ilomCtrlMIB 13 }
ilomCtrlConfigMgmt OBJECT IDENTIFIER ::= { ilomCtrlMIB 14 }
ilomCtrlSPARC OBJECT IDENTIFIER ::= { ilomCtrlMIB 15 }
ilomCtrlIdentification OBJECT IDENTIFIER ::= { ilomCtrlMIB 16 }
ilomCtrlThd OBJECT IDENTIFIER ::= { ilomCtrlMIB 17 }
ilomCtrlConformances OBJECT IDENTIFIER ::= { ilomCtrlMIB 18 }
ilomCtrlNtp OBJECT IDENTIFIER ::= { ilomCtrlClients 1 }
ilomCtrlLdap OBJECT IDENTIFIER ::= { ilomCtrlClients 2 }
ilomCtrlRadius OBJECT IDENTIFIER ::= { ilomCtrlClients 3 }
ilomCtrlRemoteSyslog OBJECT IDENTIFIER ::= { ilomCtrlClients 4 }
ilomCtrlActiveDirectory OBJECT IDENTIFIER ::= { ilomCtrlClients 5 }
ilomCtrlSMTP OBJECT IDENTIFIER ::= { ilomCtrlClients 6 }
ilomCtrlLdapSsl OBJECT IDENTIFIER ::= { ilomCtrlClients 7 }
ilomCtrlDNS OBJECT IDENTIFIER ::= { ilomCtrlClients 8 }
ilomCtrlHttp OBJECT IDENTIFIER ::= { ilomCtrlServices 1 }
ilomCtrlHttps OBJECT IDENTIFIER ::= { ilomCtrlServices 2 }
ilomCtrlSsh OBJECT IDENTIFIER ::= { ilomCtrlServices 3 }
ilomCtrlSingleSignon OBJECT IDENTIFIER ::= { ilomCtrlServices 4 }
ilomCtrlEventLog OBJECT IDENTIFIER ::= { ilomCtrlLogs 1 }
ilomCtrlPowerControl OBJECT IDENTIFIER ::= { ilomCtrlPowerReset 1 }
ilomCtrlResetControl OBJECT IDENTIFIER ::= { ilomCtrlPowerReset 2 }
ilomCtrlBackupAndRestore OBJECT IDENTIFIER ::= { ilomCtrlConfigMgmt 2 }
ilomCtrlSPARCDiags OBJECT IDENTIFIER ::= { ilomCtrlSPARC 1 }
ilomCtrlSPARCHostControl OBJECT IDENTIFIER ::= { ilomCtrlSPARC 2 }
ilomCtrlSPARCBootMode OBJECT IDENTIFIER ::= { ilomCtrlSPARC 3 }
ilomCtrlSPARCKeySwitch OBJECT IDENTIFIER ::= { ilomCtrlSPARC 4 }
ilomCtrlCompliances OBJECT IDENTIFIER ::= { ilomCtrlConformances 1 }
ilomCtrlGroups OBJECT IDENTIFIER ::= { ilomCtrlConformances 2 }
-- ***************************************************************************
-- * Textual Conventions *
-- ***************************************************************************
ILOMCtrlTargetIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A string that is short enough to be used properly as an
index without overflowing the maximum number of subOIDs."
SYNTAX OCTET STRING (SIZE (0..110))
ILOMCtrlModTargetIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A string that is short enough to be used properly along
with ILOMCtrlInstanceTargetIndex as a pair of indexes
without overflowing the maximum number of subOIDs."
SYNTAX OCTET STRING (SIZE (0..12))
ILOMCtrlInstanceTargetIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A string that is short enough to be used properly along
with ILOMCtrlModTargetIndex as a pair of indexes
without overflowing the maximum number of subOIDs."
SYNTAX OCTET STRING (SIZE (0..100))
ILOMCtrlSessionsConnectionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes possible connection
types by which a user can be log in."
SYNTAX INTEGER {
shell(1),
web(2),
other(3),
snmp(4)
}
ILOMCtrlLocalUserUsername ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A local user username.
This must start with an alphabetical letter
and may contain alphabetical letters, digits,
hyphens and underscores.
This can not be 'password'.
This can not contain spaces."
SYNTAX OCTET STRING (SIZE (4..16))
ILOMCtrlLocalUserPassword ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A local user password."
SYNTAX OCTET STRING (SIZE (8..16))
ILOMCtrlUserRole ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"An enumerated value which describes possible privilege
levels (also known as roles) a user can have.
***NOTE: this textual-convention is deprecated and replaced
by ILOMCtrlUserRoles."
SYNTAX INTEGER {
administrator(1),
operator(2),
none(3),
other(4)
}
-- While deprecated, the use of ILOMCtrlUserRole will result in the
-- following transformations:
--
-- ILOMCtrlUserRole ILOMCtrlUserRoles
-- ---------------- -----------------
-- administrator(1) "Administrator"
--
-- operator(2) "Operator"
--
-- none(3) ""
--
-- other(4) <Unknown>
ILOMCtrlUserRoles ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of role-IDs which describe the possible privilege
levels (also known as roles) for a user. This property
supports the legacy roles of 'Administrator' or
'Operator', or any of the individual role ID combinations
of 'a', 'u', 'c', 'r', 'o' and 's' (like 'aucro') where
a-admin, u-user, c-console, r-reset, s-service and o-readOnly."
SYNTAX OCTET STRING (SIZE (0..13))
ILOMCtrlLocalUserAuthCLIMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes the possible CLI modes.
The 'default' mode corresponds to the ILOM DMTF CLP. The
'alom' mode corresponds to the ALOM CMT."
SYNTAX INTEGER {
default(1),
alom(2)
}
ILOMCtrlPowerAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes possible actions
that can applied to a power control target."
SYNTAX INTEGER {
powerOn(1),
powerOff(2),
powerCycle(3),
powerSoft(4)
}
ILOMCtrlResetAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes possible actions
that can applied to a reset control target."
SYNTAX INTEGER {
reset(1),
resetNonMaskableInterrupt(2),
force(3)
}
ILOMCtrlNetworkIpDiscovery ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which determines whether the IP settings
should static or dynamic (DHCP)."
SYNTAX INTEGER {
static(1),
dynamic(2),
other(3)
}
ILOMCtrlEventLogType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes the possible event log type."
SYNTAX INTEGER {
log(1),
action(2),
fault(3),
state(4),
repair(5),
other(6)
}
ILOMCtrlEventLogClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes the possible event log class."
SYNTAX INTEGER {
audit(1),
ipmi(2),
chassis(3),
fma(4),
system(5),
pcm(6),
other(7)
}
ILOMCtrlEventSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes the possible event severities."
SYNTAX INTEGER {
disable(1),
critical(2),
major(3),
minor(4),
down(5),
other(6)
}
ILOMCtrlAlertType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes the possible alert notification types."
SYNTAX INTEGER {
email(1),
snmptrap(2),
ipmipet(3)
}
ILOMCtrlAlertSNMPVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumeration of the possible SNMP versions for traps generated
by configuring alert rules."
SYNTAX INTEGER {
v1(1),
v2c(2),
v3(3)
}
ILOMCtrlBaudRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes the possible baud rates for serial ports."
SYNTAX INTEGER {
baud9600(1),
baud19200(2),
baud38400(3),
baud57600(4),
baud115200(5)
}
ILOMCtrlFlowControl ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which describes the possible flowcontrol settings for serial ports."
SYNTAX INTEGER {
unknown(1),
hardware(2),
software(3),
none(4)
}
ILOMCtrlFirmwareUpdateStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible status values during
a firmware update."
SYNTAX INTEGER {
tftpError(1),
imageVerificationFailed(2),
inProgress(3),
success(4),
other(5)
}
ILOMCtrlFirmwareUpdateAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible firmware management
actions."
SYNTAX INTEGER {
clearProperties(1),
initiate(2)
}
ILOMCtrlResetToDefaultsAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value indicating possible actions for resetting the
SP back to factory defaults."
SYNTAX INTEGER {
none(1),
all(2),
factory(3)
}
ILOMCtrlRedundancyStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible states a device
can have in a redundant configuration."
SYNTAX INTEGER {
initializing(1),
active(2),
standby(3),
standAlone(4),
other(5)
}
ILOMCtrlRedundancyAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Setting the redundancy action to initiateFailover will cause the
current SC to switch mastership. i.e., it will initiate actions to
become master if it is standby or to become standby if it is master.
No action is taken if the SC is initializing or running in
standalone mode."
SYNTAX INTEGER {
ready(1),
initiateFailover(2)
}
ILOMCtrlSPARCDiagsLevel ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"An enumerated value which contains all the possible states for
embedded diagnostics for the host. The min value is the same as
the 'enabled' value on some platforms and the max value is the same
as the 'extended' value.
***NOTE: this textual-convention is deprecated and replaced with
ILOMCtrlSPARCDiagsLevelAdv."
SYNTAX INTEGER {
min(1),
max(2),
advsettings(3)
}
ILOMCtrlSPARCDiagsLevelAdv ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible states for
embedded diagnostics for the host. The min value is the same as
the 'enabled' value on some platforms and the max value is the same
as the 'extended' value."
SYNTAX INTEGER {
init(1),
minimum(2),
normal(3),
maximum(4),
other(5)
}
ILOMCtrlSPARCDiagsTrigger ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible states for
the trigger for embedded diagnostics on the host. x64 platforms with
embedded diagnostics only support 'all-resets' and 'none' as
possible states."
SYNTAX INTEGER {
allResets(1),
none(2),
userReset(3),
powerOnReset(4),
errorTest(5),
userResetandpowerOnReset(6),
userResetanderrorTest(7),
userTestandpowerOnReset(8),
hwChange(9),
hwChangeandpowerOnReset(10),
hwChangeanderrorTest(11)
}
ILOMCtrlSPARCDiagsMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible OPS modes specified
to POST."
SYNTAX INTEGER {
off(1),
normal(2),
service(3),
unknown(4)
}
ILOMCtrlSPARCDiagsVerbosity ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"An enumerated value which contains all the possible states for
the verbosity level for embedded diagnostics on the host.
***NOTE: this textual-convention is deprecated and replaced with
ILOMCtrlSPARCDiagsVerbosityAdv."
SYNTAX INTEGER {
min(1),
max(2),
advsettings(3)
}
ILOMCtrlSPARCDiagsVerbosityAdv ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible states for
the verbosity level for embedded diagnostics on the host."
SYNTAX INTEGER {
none(1),
minimum(2),
normal(3),
maximum(4),
debug(5)
}
ILOMCtrlSPARCHostAutoRestartPolicy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible actions
to perform when the SP determines that the host has hung."
SYNTAX INTEGER {
none(1),
reset(2),
dumpcore(3)
}
ILOMCtrlSPARCHostBootRestart ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible actions
to perform when the boot timer expires."
SYNTAX INTEGER {
none(1),
reset(2)
}
ILOMCtrlSPARCHostBootFailRecovery ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible actions
to perform when the max boot failures allowed is reached."
SYNTAX INTEGER {
none(1),
powercycle(2),
poweroff(3)
}
ILOMCtrlSPARCHostSendBreakAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Send Break Action to Host."
SYNTAX INTEGER {
nop(1),
break(2),
dumpcore(3)
}
ILOMCtrlSPARCHostIoReconfigurePolicy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible states
for the host IO reconfiguration policy that is applied at next
host power-on."
SYNTAX INTEGER {
false(1),
nextboot(2),
true(3)
}
ILOMCtrlSPARCBootModeState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible states for
the boot mode state."
SYNTAX INTEGER {
normal(1),
resetNvram(2)
}
ILOMCtrlSPARCKeySwitchState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible states for
the key switch."
SYNTAX INTEGER {
normal(1),
standby(2),
diag(3),
locked(4)
}
ILOMCtrlSPARCDiagsAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An action to take to control POST running on the host."
SYNTAX INTEGER {
stop(1),
start(2)
}
ILOMCtrlSshKeyGenType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible key types for
ssh."
SYNTAX INTEGER {
none(1),
rsa(2),
dsa(3)
}
ILOMCtrlThdAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value which contains all the possible control actions
for a THD module."
SYNTAX INTEGER {
suspend(1),
resume(2),
nop(3)
}
ILOMCtrlBackupAndRestoreAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An action to start Backup or Restore operation."
SYNTAX INTEGER {
backup(1),
restore(2)
}
-- ***************************************************************************
-- * ilomCtrlNtp *
-- ***************************************************************************
-- This section provides the properties for configuring the NTP protocol
-- settings.
ilomCtrlDeviceNTPServerOneIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the first NTP server used by the device.
This property is ignored if NTP is not enabled."
::= { ilomCtrlNtp 1 }
ilomCtrlDeviceNTPServerTwoIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the second NTP server used by the device.
This property is ignored if NTP is not enabled."
::= { ilomCtrlNtp 2 }
-- ***************************************************************************
-- * ilomCtrlLdap *
-- ***************************************************************************
-- This section provides properties for configuring the embedded LDAP
-- client.
ilomCtrlLdapEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the LDAP client is enabled."
::= { ilomCtrlLdap 1 }
ilomCtrlLdapServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the LDAP server used as a name service for
user accounts."
::= { ilomCtrlLdap 2 }
ilomCtrlLdapPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port number for the LDAP client."
::= { ilomCtrlLdap 3 }
ilomCtrlLdapBindDn OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The distinguished name (DN) for the read-only proxy user used to bind
to the LDAP server. Example: cn=proxyuser,ou=people,dc=sun,dc=com"
::= { ilomCtrlLdap 4 }
ilomCtrlLdapBindPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password of a read-only proxy user which is used to bind
to the LDAP server. This property is essentially write-only.
The write-only access level is no longer supported as of SNMPv2.
This property must return a null value when read."
::= { ilomCtrlLdap 5 }
ilomCtrlLdapSearchBase OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A search base in the LDAP database below which to find users.
Example: ou=people,dc=sun,dc=com"
::= { ilomCtrlLdap 6 }
ilomCtrlLdapDefaultRole OBJECT-TYPE
SYNTAX ILOMCtrlUserRole
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the role that a user authenticated via LDAP should have.
***NOTE: this object is deprecated and replaced by
ilomCtrlLdapDefaultRoles."
::= { ilomCtrlLdap 7 }
ilomCtrlLdapDefaultRoles OBJECT-TYPE
SYNTAX ILOMCtrlUserRoles
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the role that a user authenticated via LDAP should have.
This property supports the legacy roles of 'Administrator' or
'Operator', or any of the individual role ID combinations
of 'a', 'u', 'c', 'r', 'o' and 's' (like 'aucro') where
a-admin, u-user, c-console, r-reset, s-service and o-readOnly."
::= { ilomCtrlLdap 8 }
-- ***************************************************************************
-- * ilomCtrlRadius *
-- ***************************************************************************
-- This section provides properties for configuring the embedded RADIUS
-- client.
ilomCtrlRadiusEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the RADIUS client is enabled."
::= { ilomCtrlRadius 1 }
ilomCtrlRadiusServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the RADIUS server used as a name service for
user accounts."
::= { ilomCtrlRadius 2 }
ilomCtrlRadiusPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port number for the RADIUS client."
::= { ilomCtrlRadius 3 }
ilomCtrlRadiusSecret OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The shared secret encryption key that is used to encypt traffic between
the RADIUS client and server."
::= { ilomCtrlRadius 4 }
ilomCtrlRadiusDefaultRole OBJECT-TYPE
SYNTAX ILOMCtrlUserRole
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the role that a user authenticated via RADIUS should have.
***NOTE: this object is deprecated and replaced by ILOMCtrlUserRoles."
::= { ilomCtrlRadius 5 }
ilomCtrlRadiusDefaultRoles OBJECT-TYPE
SYNTAX ILOMCtrlUserRoles
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the role that a user authenticated via RADIUS should have.
This property supports the legacy roles of 'Administrator' or
'Operator', or any of the individual role ID combinations
of 'a', 'u', 'c', 'r', 'o' and 's' (like 'aucro') where
a-admin, u-user, c-console, r-reset, s-service and o-readOnly."
::= { ilomCtrlRadius 6 }
-- ***************************************************************************
-- * ilomCtrlRemoteSyslog *
-- ***************************************************************************
-- This section provides properties for configuring remote syslog destinations
-- to which log entries will be forwarded.
ilomCtrlRemoteSyslogDest1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the first remote syslog destination (log host)."
::= { ilomCtrlRemoteSyslog 1 }
ilomCtrlRemoteSyslogDest2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the second remote syslog destination (log host)."
::= { ilomCtrlRemoteSyslog 2 }
-- ***************************************************************************
-- * ilomCtrlHttp *
-- ***************************************************************************
-- This section provides properties for configuring the embedded Web server
-- on the device.
ilomCtrlHttpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the embedded web server should be
running and listening on the HTTP port."
::= { ilomCtrlHttp 1 }
ilomCtrlHttpPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port number that the embedded web server should
listen to for HTTP requests."
::= { ilomCtrlHttp 2 }
ilomCtrlHttpSecureRedirect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the embedded web server should
redirect HTTP connections to HTTPS."
::= { ilomCtrlHttp 3 }
-- ***************************************************************************
-- * ilomCtrlHttps *
-- ***************************************************************************
-- This section provides properties for configuring the embedded Web server
-- on the device.
ilomCtrlHttpsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the embedded web server should be
running and listening on the HTTPS port."
::= { ilomCtrlHttps 1 }
ilomCtrlHttpsPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port number that the embedded web server should
listen to for HTTPS requests."
::= { ilomCtrlHttps 2 }
-- ***************************************************************************
-- * ilomCtrlSsh *
-- ***************************************************************************
-- This section provides properties for viewing the secure shell settings
-- for the device.
ilomCtrlSshRsaKeyFingerprint OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fingerprint of the RSA key used for the SSH protocol."
::= { ilomCtrlSsh 1 }
ilomCtrlSshRsaKeyLength OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the RSA key used for the SSH protocol."
::= { ilomCtrlSsh 2 }
ilomCtrlSshDsaKeyFingerprint OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fingerprint of the DSA key used for the SSH protocol."
::= { ilomCtrlSsh 3 }
ilomCtrlSshDsaKeyLength OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the DSA key used for the SSH protocol."
::= { ilomCtrlSsh 4 }
ilomCtrlSshGenerateNewKeyAction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to initiate a new public key generation."
::= { ilomCtrlSsh 5 }
ilomCtrlSshGenerateNewKeyType OBJECT-TYPE
SYNTAX ILOMCtrlSshKeyGenType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH new key type. The possible type are rsa(2), dsa(3)."
::= { ilomCtrlSsh 6 }
ilomCtrlSshRestartSshdAction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to initiate sshd restart."
::= { ilomCtrlSsh 7 }
ilomCtrlSshEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speicfies whether or not the SSHD is enabled."
::= { ilomCtrlSsh 8 }
-- ***************************************************************************
-- * ilomCtrlSingleSignon *
-- ***************************************************************************
-- This section provides a property for controlling the single sign-on
-- authentication behavior of the device.
ilomCtrlSingleSignonEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specified whether single sign-on authentication should be
enabled on the device. Single sign-on allows tokens to be passed
around so that it is not necessary to re-enter passwords between
different applications. This would allow single sign-on between
the SC web interface and the SP web interface, between the SC
command-line interface and the SP command-line interface, and
between the SC and SP interfaces and the Java Remote Console
application."
::= { ilomCtrlSingleSignon 1 }
-- ***************************************************************************
-- * ilomCtrlNetwork *
-- ***************************************************************************
-- This section provides properties for configuring the network for
-- the system controller and/or service processor(s).
ilomCtrlNetworkTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlNetworkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing all targets whose networks can be controlled."
::= { ilomCtrlNetwork 1 }
ilomCtrlNetworkEntry OBJECT-TYPE
SYNTAX ILOMCtrlNetworkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a target which can be reset."
INDEX { ilomCtrlNetworkTarget }
::= { ilomCtrlNetworkTable 1 }
ILOMCtrlNetworkEntry ::= SEQUENCE {
ilomCtrlNetworkTarget SnmpAdminString,
ilomCtrlNetworkMacAddress SnmpAdminString,
ilomCtrlNetworkIpDiscovery ILOMCtrlNetworkIpDiscovery,
ilomCtrlNetworkIpAddress IpAddress,
ilomCtrlNetworkIpGateway IpAddress,
ilomCtrlNetworkIpNetmask IpAddress,
ilomCtrlNetworkPendingIpDiscovery ILOMCtrlNetworkIpDiscovery,
ilomCtrlNetworkPendingIpAddress IpAddress,
ilomCtrlNetworkPendingIpGateway IpAddress,
ilomCtrlNetworkPendingIpNetmask IpAddress,
ilomCtrlNetworkCommitPending TruthValue,
ilomCtrlNetworkOutOfBandMacAddress SnmpAdminString,
ilomCtrlNetworkSidebandMacAddress SnmpAdminString,
ilomCtrlNetworkPendingManagementPort SnmpAdminString,
ilomCtrlNetworkManagementPort SnmpAdminString,
ilomCtrlNetworkDHCPServerAddr IpAddress,
ilomCtrlNetworkState TruthValue
}
ilomCtrlNetworkTarget OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the nomenclature name for a target which has a configurable
network. On some systems, there are multiple targets which have
networks. On a traditional, non-blade system, this table will contain
only one row for the network configuration of the service processor,
which has a nomenclature name of '/SP'. On blade systems, this table
will contain multiple rows. There will be a row for '/SC' which
allows for configuration of the system controller's network settings.
In addition, there will be rows for each blade's service processor.
For example, a blade's service processor nomenclature takes the form of
'/CH/BL0/SP', '/CH/BL1/SP' and so on. This will allow for the
configuration of the service processors from the system controller.
In the case of redundant system controllers, the floating master IP
addressed can be configured using a name of /MASTERSC."
::= { ilomCtrlNetworkEntry 1 }
ilomCtrlNetworkMacAddress OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the MAC address of the service processor or system controller."
::= { ilomCtrlNetworkEntry 2 }
ilomCtrlNetworkIpDiscovery OBJECT-TYPE
SYNTAX ILOMCtrlNetworkIpDiscovery
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the current target is configured to have static
IP settings or whether these settings are retrieved dynamically from DHCP."
::= { ilomCtrlNetworkEntry 3 }
ilomCtrlNetworkIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current IP address for the given target."
::= { ilomCtrlNetworkEntry 4 }
ilomCtrlNetworkIpGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current IP gateway for the given target."
::= { ilomCtrlNetworkEntry 5 }
ilomCtrlNetworkIpNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current IP netmask for the given target."
::= { ilomCtrlNetworkEntry 6 }
ilomCtrlNetworkPendingIpDiscovery OBJECT-TYPE
SYNTAX ILOMCtrlNetworkIpDiscovery
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to set the pending value for the mode of
IP discovery for the given target. The possible values are static(1)
or dynamic(2). Static values can be specified by setting the other
pending properties in this table: ilomCtrlNetworkPendingIpAddress,
ilomCtrlNetworkPendingIpGateway, and ilomCtrlNetworkPendingIpNetmask.
If dynamic is specified, the other pending properties should
not be set. This property does not take effect until the
ilomCtrlNetworkCommitPending property is set to true for the
given row."
::= { ilomCtrlNetworkEntry 7 }
ilomCtrlNetworkPendingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to set the pending IP address for the given
target. This property does not take effect until the
ilomCtrlNetworkCommitPending property is set to true for the
given row."
::= { ilomCtrlNetworkEntry 8 }
ilomCtrlNetworkPendingIpGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to set the pending IP gateway for the given
target. This property does not take effect until the
ilomCtrlNetworkCommitPending property is set to true for the
given row."
::= { ilomCtrlNetworkEntry 9 }
ilomCtrlNetworkPendingIpNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to set the pending IP netmask for the given
target. This property does not take effect until the
ilomCtrlNetworkCommitPending property is set to true for the
given row."
::= { ilomCtrlNetworkEntry 10 }
ilomCtrlNetworkCommitPending OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to commit pending properties for the given row.
Settings this property to true(1) will cause the network to be
reconfigured according to the values specified in the other pending
properties."
::= { ilomCtrlNetworkEntry 11 }
ilomCtrlNetworkOutOfBandMacAddress OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the MAC address of the out of band management interface (where applicable)"
::= { ilomCtrlNetworkEntry 12 }
ilomCtrlNetworkSidebandMacAddress OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the MAC address of the sideband management interface (where applicable)"
::= { ilomCtrlNetworkEntry 13 }
ilomCtrlNetworkPendingManagementPort OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to set the pending management port
for the giventarget. This property does not take effect until the
ilomCtrlNetworkCommitPending property is set to true for the
given row."
::= { ilomCtrlNetworkEntry 14 }
ilomCtrlNetworkManagementPort OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the current managment port for the given target"
::= { ilomCtrlNetworkEntry 15 }
ilomCtrlNetworkDHCPServerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the DHCP server for this row."
::= { ilomCtrlNetworkEntry 16 }
ilomCtrlNetworkState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the row is enabled."
::= { ilomCtrlNetworkEntry 17 }
-- ***************************************************************************
-- * ilomCtrlUsers *
-- ***************************************************************************
-- This section provides properties for creating and removing local
-- users on the device and setting their password.
-- While deprecated, the use of ilomCtrlLocalUserAuthTable will work as
-- before, with the Role to Roles transformation noted above.
-- All users shown in either ilomCtrlLocalUserAuthTable or
-- ilomCtrlLocalUserTable will be shown in both.
-- Where Roles for a user in the latter do not match one of the defined
-- Role mappings, other(4) will be shown.
ilomCtrlLocalUserAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlLocalUserAuthEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table provides a listing of the current local users on a
system along with their password state.
***NOTE: this table is deprecated and replaced with
ilomCtrlLocalUserTable."
::= { ilomCtrlUsers 1 }
ilomCtrlLocalUserAuthEntry OBJECT-TYPE
SYNTAX ILOMCtrlLocalUserAuthEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry containing objects for a local user in the database.
***NOTE: this object is deprecated and replaced with
ilomCtrlLocalUserEntry."
INDEX { ilomCtrlLocalUserAuthUsername }
::= { ilomCtrlLocalUserAuthTable 1 }
ILOMCtrlLocalUserAuthEntry ::= SEQUENCE {
ilomCtrlLocalUserAuthUsername SnmpAdminString,
ilomCtrlLocalUserAuthPassword SnmpAdminString,
ilomCtrlLocalUserAuthRole ILOMCtrlUserRole,
ilomCtrlLocalUserAuthRowStatus RowStatus,
ilomCtrlLocalUserAuthCLIMode ILOMCtrlLocalUserAuthCLIMode
}
ilomCtrlLocalUserAuthUsername OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The username of a local user on the device.
***NOTE: this object is deprecated and replaced with
ilomCtrlLocalUserUsername."
::= { ilomCtrlLocalUserAuthEntry 1 }
ilomCtrlLocalUserAuthPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The password of a local user on the device. This
property is essentially write-only. The write-only
access level is no longer supported as of SNMPv2.
This property must return a null value when read.
***NOTE: this object is deprecated and replaced with
ilomCtrlLocalUserPassword."
::= { ilomCtrlLocalUserAuthEntry 2 }
ilomCtrlLocalUserAuthRole OBJECT-TYPE
SYNTAX ILOMCtrlUserRole
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies whether a user's password is assigned or unassigned.
***NOTE: this object is deprecated and replaced with
ilomCtrlLocalUserRoles."
::= { ilomCtrlLocalUserAuthEntry 3 }
ilomCtrlLocalUserAuthRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object is used to create a new row or to delete
an existing row in the table. This property can be set
to either createAndWait(5) or destroy(6), to create and remove
a user respectively.
***NOTE: this object is deprecated and replaced with
ilomCtrlLocalUserRowStatus."
::= { ilomCtrlLocalUserAuthEntry 4 }
ilomCtrlLocalUserAuthCLIMode OBJECT-TYPE
SYNTAX ILOMCtrlLocalUserAuthCLIMode
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Allows the CLI mode to be configured on a per-user basis. The CLI mode
determines which shell the user will interact with. If the 'default'
mode is select, the user will see the DMTF CLP after logging in via
ssh or the console. If the 'alom' mode is selected, the user will see
the ALOM CMT shell after logging in via ssh or the console.
***NOTE: this object is deprecated and replaced with
ilomCtrlLocalUserCLIMode."
::= { ilomCtrlLocalUserAuthEntry 5 }
ilomCtrlLocalUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlLocalUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides a listing of the current local users on a
system along with their password state."
::= { ilomCtrlUsers 2 }
ilomCtrlLocalUserEntry OBJECT-TYPE
SYNTAX ILOMCtrlLocalUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for a local user in the database."
INDEX { ilomCtrlLocalUserUsername }
::= { ilomCtrlLocalUserTable 1 }
ILOMCtrlLocalUserEntry ::= SEQUENCE {
ilomCtrlLocalUserUsername ILOMCtrlLocalUserUsername,
ilomCtrlLocalUserPassword ILOMCtrlLocalUserPassword,
ilomCtrlLocalUserRoles ILOMCtrlUserRoles,
ilomCtrlLocalUserRowStatus RowStatus,
ilomCtrlLocalUserCLIMode ILOMCtrlLocalUserAuthCLIMode
}
ilomCtrlLocalUserUsername OBJECT-TYPE
SYNTAX ILOMCtrlLocalUserUsername
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The username of a local user on the device."
::= { ilomCtrlLocalUserEntry 1 }
ilomCtrlLocalUserPassword OBJECT-TYPE
SYNTAX ILOMCtrlLocalUserPassword
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password of a local user on the device. This
property is essentially write-only. The write-only
access level is no longer supported as of SNMPv2.
This property must return a null value when read."
::= { ilomCtrlLocalUserEntry 2 }
ilomCtrlLocalUserRoles OBJECT-TYPE
SYNTAX ILOMCtrlUserRoles
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the role that is associated with a user. The roles can
be assigned for the legacy roles of 'Administrator' or 'Operator', or
any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's'.
The role IDs can be joined together 'aucros' where a-admin, u-user,
c-console, r-reset, s-service and o-readOnly."
::= { ilomCtrlLocalUserEntry 3 }
ilomCtrlLocalUserRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to delete
an existing row in the table. This property can be set
to either createAndWait(5) or destroy(6), to create and remove
a user respectively."
::= { ilomCtrlLocalUserEntry 4 }
ilomCtrlLocalUserCLIMode OBJECT-TYPE
SYNTAX ILOMCtrlLocalUserAuthCLIMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the CLI mode to be configured on a per-user basis. The CLI mode
determines which shell the user will interact with. If the 'default'
mode is select, the user will see the DMTF CLP after logging in via
ssh or the console. If the 'alom' mode is selected, the user will see
the ALOM CMT shell after logging in via ssh or the console."
::= { ilomCtrlLocalUserEntry 5 }
-- ***************************************************************************
-- * ilomCtrlSessions *
-- ***************************************************************************
-- This section provides properties for retriving a list of current active
-- active sessions.
ilomCtrlSessionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlSessionsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing the current user sessions."
::= { ilomCtrlSessions 1 }
ilomCtrlSessionsEntry OBJECT-TYPE
SYNTAX ILOMCtrlSessionsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a current session."
INDEX { ilomCtrlSessionsId }
::= { ilomCtrlSessionsTable 1 }
ILOMCtrlSessionsEntry ::= SEQUENCE {
ilomCtrlSessionsId Integer32,
ilomCtrlSessionsUsername SnmpAdminString,
ilomCtrlSessionsConnectionType ILOMCtrlSessionsConnectionType,
ilomCtrlSessionsLoginTime DateAndTime
}
ilomCtrlSessionsId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The instance number of a given logged-in user. This
property is necessary since the same user can be logged
in multiple times."
::= { ilomCtrlSessionsEntry 1 }
ilomCtrlSessionsUsername OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The username of the user associated with the session."
::= { ilomCtrlSessionsEntry 2 }
ilomCtrlSessionsConnectionType OBJECT-TYPE
SYNTAX ILOMCtrlSessionsConnectionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of connection that the given user is using to
access the device."
::= { ilomCtrlSessionsEntry 3 }
ilomCtrlSessionsLoginTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time that the logged into the device."
::= { ilomCtrlSessionsEntry 4 }
-- ***************************************************************************
-- * ilomCtrlFirmwareMgmt *
-- ***************************************************************************
-- These properties are used to manage the firmware on the device. The firmware
-- image itself is not tranferred via SNMP. Instead, the MIB can be used to
-- initiate the transfer of the image via TFTP.
ilomCtrlFirmwareMgmtVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the current firmware image."
::= { ilomCtrlFirmwareMgmt 1 }
ilomCtrlFirmwareBuildNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The build number of the current firmware image."
::= { ilomCtrlFirmwareMgmt 2 }
ilomCtrlFirmwareBuildDate OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The build date and time of the current firmware image."
::= { ilomCtrlFirmwareMgmt 3 }
ilomCtrlFirmwareTFTPServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the TFTP server which will be used to download the
the firmware image."
::= { ilomCtrlFirmwareMgmt 4 }
ilomCtrlFirmwareTFTPFileName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relative path of the new firmware image file on the TFTP server."
::= { ilomCtrlFirmwareMgmt 5 }
ilomCtrlFirmwarePreserveConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property determines whether the previous configuration of the device
should be preserved after a firmware update. The configuration data includes
all users information, configuration of clients and services, and any logs.
The default value of this property is true."
::= { ilomCtrlFirmwareMgmt 6 }
ilomCtrlFirmwareMgmtStatus OBJECT-TYPE
SYNTAX ILOMCtrlFirmwareUpdateStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This property indicates the status of a firmware update. If a TFTP error
occurred while attempting to upload a new firmware image, the value of
this property will be tftpError(1). If the image was uploaded correctly but
it did not pass verification, the value of this property will be
imageVerificationFailed(2). Otherwise, the status will indicate that the
update is inProgress(3) or is a success(4). A firmware update could take
as long as 20 minutes. During this time, no other operations should be
performed on the device. Upon success, the device will be reset."
::= { ilomCtrlFirmwareMgmt 7 }
ilomCtrlFirmwareMgmtAction OBJECT-TYPE
SYNTAX ILOMCtrlFirmwareUpdateAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to initiate a firmware update using the values
of the other firmware management properties as parameters. It can
also clear the values of those parameters. To initiate a firmware
update, set the value of this property to initate(2). To clear the
values of the writeable firmware management properties, set this
propery to clearProperties(1). Before initiating a firmware update,
the ilomCtrlFirmwareTFTPServerIP, ilomCtrlFirmwareTFTPFileName,
and ilomCtrlFirmwarePreserveConfig properties must be set. After
intiating a firmware update, the ilomCtrlFirmwareMgmtStatus
property can be used to determine if the operation was successful.
This is effectively a write-only property."
::= { ilomCtrlFirmwareMgmt 8 }
ilomCtrlFirmwareMgmtFilesystemVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the current file system."
::= { ilomCtrlFirmwareMgmt 9 }
ilomCtrlFirmwareDelayBIOS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"On servers that support a BIOS, this property is used to postpone the
BIOS upgrade until the next server poweroff. Setting this property to
'false' will cause the server to be forced off if a BIOS upgrade is
necessary.
The default value of this property is false."
::= { ilomCtrlFirmwareMgmt 10 }
-- ***************************************************************************
-- * ilomCtrlEventLog *
-- ***************************************************************************
-- This section provides the ability to view the event logs which are stored
-- on the device.
ilomCtrlEventLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlEventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides a list of the current entries in the
event log."
::= { ilomCtrlEventLog 1 }
ilomCtrlEventLogEntry OBJECT-TYPE
SYNTAX ILOMCtrlEventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the event logs table."
INDEX { ilomCtrlEventLogRecordID }
::= { ilomCtrlEventLogTable 1 }
ILOMCtrlEventLogEntry ::= SEQUENCE {
ilomCtrlEventLogRecordID Unsigned32,
ilomCtrlEventLogType ILOMCtrlEventLogType,
ilomCtrlEventLogTimestamp DateAndTime,
ilomCtrlEventLogClass ILOMCtrlEventLogClass,
ilomCtrlEventLogSeverity ILOMCtrlEventSeverity,
ilomCtrlEventLogDescription SnmpAdminString
}
ilomCtrlEventLogRecordID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The record number for a given the event log entry."
::= { ilomCtrlEventLogEntry 1 }
ilomCtrlEventLogType OBJECT-TYPE
SYNTAX ILOMCtrlEventLogType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer representing the type of event."
::= { ilomCtrlEventLogEntry 2 }
ilomCtrlEventLogTimestamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time that the event log entry was recorded."
::= { ilomCtrlEventLogEntry 3 }
ilomCtrlEventLogClass OBJECT-TYPE
SYNTAX ILOMCtrlEventLogClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer representing the class of event."
::= { ilomCtrlEventLogEntry 4 }
ilomCtrlEventLogSeverity OBJECT-TYPE
SYNTAX ILOMCtrlEventSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The event severity corresponding to the given log entry."
::= { ilomCtrlEventLogEntry 5 }
ilomCtrlEventLogDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the event."
::= { ilomCtrlEventLogEntry 6 }
ilomCtrlEventLogClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to 'true' clears the event log."
::= { ilomCtrlEventLog 2 }
-- ***************************************************************************
-- * ilomCtrlAlerts *
-- ***************************************************************************
-- This section provides the ability to configure alerts, such as e-mail
-- notifications, snmp traps, or remote syslog.
ilomCtrlAlertsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlAlertsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to view and add alert rules."
::= { ilomCtrlAlerts 1 }
ilomCtrlAlertsEntry OBJECT-TYPE
SYNTAX ILOMCtrlAlertsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for an alert rule."
INDEX { ilomCtrlAlertID }
::= { ilomCtrlAlertsTable 1 }
ILOMCtrlAlertsEntry ::= SEQUENCE {
ilomCtrlAlertID Integer32,
ilomCtrlAlertSeverity ILOMCtrlEventSeverity,
ilomCtrlAlertType ILOMCtrlAlertType,
ilomCtrlAlertDestinationIP IpAddress,
ilomCtrlAlertDestinationEmail SnmpAdminString,
ilomCtrlAlertSNMPVersion ILOMCtrlAlertSNMPVersion,
ilomCtrlAlertSNMPCommunityOrUsername SnmpAdminString,
ilomCtrlAlertDestinationPort Integer32,
ilomCtrlAlertEmailEventClassFilter SnmpAdminString,
ilomCtrlAlertEmailEventTypeFilter SnmpAdminString,
ilomCtrlAlertEmailCustomSender SnmpAdminString,
ilomCtrlAlertEmailMessagePrefix SnmpAdminString
}
ilomCtrlAlertID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer ID associated with a given alert rule."
::= { ilomCtrlAlertsEntry 1 }
ilomCtrlAlertSeverity OBJECT-TYPE
SYNTAX ILOMCtrlEventSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property specifies the mininum event severity which should
trigger an alert, for a given class."
::= { ilomCtrlAlertsEntry 2 }
ilomCtrlAlertType OBJECT-TYPE
SYNTAX ILOMCtrlAlertType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property specifies the type of notification for a given alert.
If the type is snmptrap(2) or ipmipet(3), the ilomCtrlAlertDestinationIP
must be specified. If the type is email(1), the ilomCtrlAlertDestinationEmail
must be specified."
::= { ilomCtrlAlertsEntry 3 }
ilomCtrlAlertDestinationIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property species the IP address to send alert notifications when
the alert type is snmptrap(2), ipmipet(3), or remotesyslog(4)."
::= { ilomCtrlAlertsEntry 4}
ilomCtrlAlertDestinationEmail OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property species the email address to send alert notifications when
the alert type is email(1)."
::= { ilomCtrlAlertsEntry 5}
ilomCtrlAlertSNMPVersion OBJECT-TYPE
SYNTAX ILOMCtrlAlertSNMPVersion
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of SNMP trap that should be used for the given
alert rule."
::= { ilomCtrlAlertsEntry 6 }
ilomCtrlAlertSNMPCommunityOrUsername OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string specifies the community string to be used when the
ilomCtrlAlertSNMPVersion property is set to 'v1' or 'v2c'.
Alternatively, this string specifies the SNMP username to use
when the ilomCtrlAlertSNMPVersion is set to 'v3'."
::= { ilomCtrlAlertsEntry 7 }
ilomCtrlAlertDestinationPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination port for SNMP traps, 0 maps to the default"
::= { ilomCtrlAlertsEntry 8 }
ilomCtrlAlertEmailEventClassFilter OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A class name or 'all' to filter emailed alerts on."
::= { ilomCtrlAlertsEntry 9 }
ilomCtrlAlertEmailEventTypeFilter OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A type name or 'all' to filter emailed alerts on."
::= { ilomCtrlAlertsEntry 10 }
ilomCtrlAlertEmailCustomSender OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An optional format to identify the sender or the 'from' address.
Customizing this string allows the user to specify the exact contents
(up to 80 chars) of the 'from' field in the email message. Either one
of the substitution strings '<IPADDRESS>' or '<HOSTNAME>' can be used
as needed. By default, this parameter is an empty string, which
results in the standard ILOM formatted originator for the
alerts. e.g., ilom-sp@sp1302.dev.sun.com, sun-ilom@[<IPADDRESS>],
or ilom-alert@<HOSTNAME>.abc.com"
DEFVAL { "" }
::= { ilomCtrlAlertsEntry 11 }
ilomCtrlAlertEmailMessagePrefix OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An optional string that can be added to the beginning of
the message body. The prefix size can be up to 80
characters."
DEFVAL { "" }
::= { ilomCtrlAlertsEntry 12 }
-- ***************************************************************************
-- * ilomCtrlClock *
-- ***************************************************************************
ilomCtrlDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time of the device."
::= { ilomCtrlClock 1 }
ilomCtrlNTPEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not Network Time Protocol is enabled."
::= { ilomCtrlClock 2 }
ilomCtrlTimezone OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured timezone string."
::= { ilomCtrlClock 3 }
-- ***************************************************************************
-- * ilomCtrlSerial *
-- ***************************************************************************
ilomCtrlSerialInternalPortPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the given device has an internal serial port that
is configurable. The internal serial port is the connection between
the host server and the service processor that allows the SP to
access the host serial console."
::= { ilomCtrlSerial 1 }
ilomCtrlSerialInternalPortBaudRate OBJECT-TYPE
SYNTAX ILOMCtrlBaudRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the current baud rate setting for the internal serial port.
This is only readable/settable if ilomCtrlSerialInternalPortPresent
is true."
::= { ilomCtrlSerial 2 }
ilomCtrlSerialExternalPortPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the given device has an external serial port that
is configurable."
::= { ilomCtrlSerial 3 }
ilomCtrlSerialExternalPortBaudRate OBJECT-TYPE
SYNTAX ILOMCtrlBaudRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the current baud rate setting for the external serial port.
This is only readable/settable if ilomCtrlSerialExternalPortPresent
is true."
::= { ilomCtrlSerial 4 }
ilomCtrlSerialExternalPortFlowControl OBJECT-TYPE
SYNTAX ILOMCtrlFlowControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the current flowcontrol setting for the external serial port.
This is only readable/settable if ilomCtrlSerialExternalPortPresent
is true."
::= { ilomCtrlSerial 5 }
-- ***************************************************************************
-- * ilomCtrlPowerControl *
-- ***************************************************************************
-- This section provides properties for controlling the power for a given
-- target. In some systems, such as blade systems, there are multiple
-- targets to control.
ilomCtrlPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing all targets whose power can be controlled."
::= { ilomCtrlPowerControl 1 }
ilomCtrlPowerEntry OBJECT-TYPE
SYNTAX ILOMCtrlPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a power-controllable target."
INDEX { ilomCtrlPowerTarget }
::= { ilomCtrlPowerTable 1 }
ILOMCtrlPowerEntry ::= SEQUENCE {
ilomCtrlPowerTarget SnmpAdminString,
ilomCtrlPowerAction ILOMCtrlPowerAction
}
ilomCtrlPowerTarget OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the nomenclature name for a target which supports
power control. On some systems, there are multiple targets
which support power control. On a traditional, non-blade system,
this table will contain only one row. The nomenclature name for
a traditional server is '/SYS'. On blade systems, this table
will contain multiple rows. There will be a row for '/CH' which
allows for power control of the entire chassis. In addition,
there will be rows for each blade. Blade nomenclature
takes the form of '/CH/BL0/SYS', '/CH/BL1/SYS', and so on."
::= { ilomCtrlPowerEntry 1 }
ilomCtrlPowerAction OBJECT-TYPE
SYNTAX ILOMCtrlPowerAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to apply to the given power control target. The
possible actions are powerOn(1), powerOff(2), powerCycle(3),
and powerSoft(4).
When this value is read, it returns a null value."
::= { ilomCtrlPowerEntry 2 }
-- ***************************************************************************
-- * ilomCtrlResetControl *
-- ***************************************************************************
-- This section provides properties for performing a reset of a given
-- target. In some systems, such as blade systems, there are multiple
-- targets to control.
ilomCtrlResetTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlResetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing all targets which can be reset."
::= { ilomCtrlResetControl 1 }
ilomCtrlResetEntry OBJECT-TYPE
SYNTAX ILOMCtrlResetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a target which can be reset."
INDEX { ilomCtrlResetTarget }
::= { ilomCtrlResetTable 1 }
ILOMCtrlResetEntry ::= SEQUENCE {
ilomCtrlResetTarget SnmpAdminString,
ilomCtrlResetAction ILOMCtrlResetAction
}
ilomCtrlResetTarget OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the nomenclature name for a target which supports
reset capabilities. On some systems, there are multiple targets
which support reset. On most systems, only system controllers
and service processors support reset. On a traditional, non-blade
system, this table will contain only one row, representing its
service processor. The nomenclature name for a traditional server's
service processor is '/SP'. On blade systems, this table
will contain multiple rows. There will be a row for '/SC' which
allows for reset of the system controller. In addition,
there will be rows for each blade's service processor. For example,
a blade's service processor nomenclature takes the form of
'/CH/BL0/SP', '/CH/BL1/SP' and so on."
::= { ilomCtrlResetEntry 1 }
ilomCtrlResetAction OBJECT-TYPE
SYNTAX ILOMCtrlResetAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to apply to the given reset control target. The
possible actions are reset(1), which is a normal reset,
resetNonMaskableInterrupt(2) which is a forced reset, and
force(3) which is a forced reset for platforms that do not
support NMI.
When this value is read, it returns a null value."
::= { ilomCtrlResetEntry 2 }
-- ***************************************************************************
-- * ilomCtrlRedundancy *
-- ***************************************************************************
-- This section provides properties for the redundancy features of the device.
-- The redundancy features allow two system controllers to be configured in
-- a highly available environment. This section does not apply to service
-- processors.
ilomCtrlRedundancyStatus OBJECT-TYPE
SYNTAX ILOMCtrlRedundancyStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This property indicates the status of the device in a redundant
configuration. It may be active(2) or standby(3) when configured
as a redundant pair or standAlone(4) if it does not have a peer.
In addition, it may be in a state called initializing(1) if
it is in a transitional state."
::= { ilomCtrlRedundancy 1 }
ilomCtrlRedundancyAction OBJECT-TYPE
SYNTAX ILOMCtrlRedundancyAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This action is used to promote or demote this device from active
or standy status."
::= { ilomCtrlRedundancy 2 }
ilomCtrlRedundancyFRUName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FRU Name of the CMM on which this agent is running."
::= { ilomCtrlRedundancy 3 }
-- ***************************************************************************
-- * ilomCtrlPolicy
-- ***************************************************************************
-- This section defines a table for administering policies.
ilomCtrlPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing all policies that can be administered."
::= { ilomCtrlPolicy 1 }
ilomCtrlPolicyEntry OBJECT-TYPE
SYNTAX ILOMCtrlPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a policy which can be enabled or disabled."
INDEX { ilomCtrlPolicyId }
::= { ilomCtrlPolicyTable 1 }
ILOMCtrlPolicyEntry ::= SEQUENCE {
ilomCtrlPolicyId Integer32,
ilomCtrlPolicyShortStr DisplayString,
ilomCtrlPolicyLongStr DisplayString,
ilomCtrlPolicyEnabled TruthValue
}
ilomCtrlPolicyId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the policy."
::= { ilomCtrlPolicyEntry 1 }
ilomCtrlPolicyShortStr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A short description of the policy."
::= { ilomCtrlPolicyEntry 2 }
ilomCtrlPolicyLongStr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A verbose description of the policy."
::= { ilomCtrlPolicyEntry 3 }
ilomCtrlPolicyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of the policy."
::= { ilomCtrlPolicyEntry 4 }
-- ***************************************************************************
-- * ilomCtrlConfigMgmt
-- ***************************************************************************
-- This section includes properties related to Configuration management.
ilomCtrlResetToDefaultsAction OBJECT-TYPE
SYNTAX ILOMCtrlResetToDefaultsAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to initiate the action of restoring the
configuration on the SP to the original factory default state."
::= { ilomCtrlConfigMgmt 1 }
-- ***************************************************************************
-- * ilomCtrlBackupAndRestore
-- ***************************************************************************
-- This section includes properties related to BackupAndRestore operation.
ilomCtrlBackupAndRestoreTargetURI OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to set target destination of configuration xml
file during backup and restore.
The syntax is {protocol}://[user:passwword]@]host[/][path/][file]
for example tftp://10.8.136.154/remotedir/config_backup.xml
currently, the supported protocols are: scp, tftp.
for certain protocol which needs password field, please use
ilomCtrlBackupAndRestoreProtocolPassword to set password."
::= { ilomCtrlBackupAndRestore 1 }
ilomCtrlBackupAndRestorePassphrase OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to set passphrase for encrypt/decrypt
sensitive data during backup and restore.
For snmpget, it returns null as value. "
::= { ilomCtrlBackupAndRestore 2 }
ilomCtrlBackupAndRestoreAction OBJECT-TYPE
SYNTAX ILOMCtrlBackupAndRestoreAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This property is used to issue a action,
either backup or restore. "
::= { ilomCtrlBackupAndRestore 3 }
ilomCtrlBackupAndRestoreActionStatus OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This property is used to monitor the current status of
backup/restore. "
::= { ilomCtrlBackupAndRestore 4 }
-- ***************************************************************************
-- * ilomCtrlSPARCDiags
-- ***************************************************************************
-- This section defines properties for configuring SPARC-specific diagnostics.
ilomCtrlSPARCDiagsLevel OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsLevel
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates the level of embedded diagnostics that should be run
on the host during a boot.
***NOTE: this object is deprecated and replaced with these:
ilomCtrlSPARCDiagsPowerOnLevel,
ilomCtrlSPARCDiagsUserResetLevel,
ilomCtrlSPARCDiagsErrorResetLevel
While deprecated, this object will display advsettings(3), unless:
- all 3 of the above are currently set to init(1),
in which case this object will display min(1)
- all 3 of the above are currently set to maximum(3),
in which case this object will display max(2)."
::= { ilomCtrlSPARCDiags 1 }
ilomCtrlSPARCDiagsTrigger OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsTrigger
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the triggers of embedded diagnostics for the host."
::= { ilomCtrlSPARCDiags 2 }
ilomCtrlSPARCDiagsVerbosity OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsVerbosity
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates the verbosity level of embedded diagnostics that should
be run on the host during a boot.
***NOTE: this object is deprecated and replaced with these:
ilomCtrlSPARCDiagsPowerOnVerbosity,
ilomCtrlSPARCDiagsUserResetVerbosity,
ilomCtrlSPARCDiagsErrorResetVerbosity.
While deprecated, this object will display advsettings(3), unless:
- all 3 of the above are currently set to minimum(1),
in which case this object will display min(1)
- all 3 of the above are currently set to maximum(3),
in which case this object will display max(2)."
::= { ilomCtrlSPARCDiags 3 }
ilomCtrlSPARCDiagsMode OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the modes for POST. POST will stop at the mode
specified by this property."
::= { ilomCtrlSPARCDiags 4 }
ilomCtrlSPARCDiagsPowerOnLevel OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsLevelAdv
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level of embedded diagnostics that should be run
on the host during a boot for the power-on-reset trigger."
::= { ilomCtrlSPARCDiags 5 }
ilomCtrlSPARCDiagsUserResetLevel OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsLevelAdv
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level of embedded diagnostics that should be run
on the host during a boot for the user-reset trigger."
::= { ilomCtrlSPARCDiags 6 }
ilomCtrlSPARCDiagsErrorResetLevel OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsLevelAdv
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level of embedded diagnostics that should be run
on the host during a boot for the error-reset trigger."
::= { ilomCtrlSPARCDiags 7 }
ilomCtrlSPARCDiagsPowerOnVerbosity OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsVerbosityAdv
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the verbosity level of embedded diagnostics that should
be run on the host during a boot for power-on-reset trigger."
::= { ilomCtrlSPARCDiags 8 }
ilomCtrlSPARCDiagsUserResetVerbosity OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsVerbosityAdv
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the verbosity level of embedded diagnostics that should
be run on the host during a boot for user-reset trigger."
::= { ilomCtrlSPARCDiags 9 }
ilomCtrlSPARCDiagsErrorResetVerbosity OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsVerbosityAdv
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the verbosity level of embedded diagnostics that should
be run on the host during a boot for error-reset trigger."
::= { ilomCtrlSPARCDiags 10 }
ilomCtrlSPARCDiagsStatus OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the progress of POST diagnostics on the host, expressed
as a percentage."
::= { ilomCtrlSPARCDiags 11 }
ilomCtrlSPARCDiagsAction OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An action to take to control POST running on the host."
::= { ilomCtrlSPARCDiags 12 }
ilomCtrlSPARCDiagsHwChangeLevel OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsLevelAdv
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the level of embedded diagnostics that should be run
on the host during a boot for the hw-change trigger."
::= { ilomCtrlSPARCDiags 13 }
ilomCtrlSPARCDiagsHwChangeVerbosity OBJECT-TYPE
SYNTAX ILOMCtrlSPARCDiagsVerbosityAdv
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the verbosity level of embedded diagnostics that should
be run on the host during a boot for hw-change trigger."
::= { ilomCtrlSPARCDiags 14 }
-- ***************************************************************************
-- * ilomCtrlSPARCHostControl
-- ***************************************************************************
-- This section defines properties used to control SPARC-specific host software.
ilomCtrlSPARCHostMACAddress OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the starting MAC address for the host."
::= { ilomCtrlSPARCHostControl 1 }
ilomCtrlSPARCHostOBPVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the version string for OBP."
::= { ilomCtrlSPARCHostControl 3 }
ilomCtrlSPARCHostPOSTVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the version string for POST."
::= { ilomCtrlSPARCHostControl 4 }
ilomCtrlSPARCHostAutoRunOnError OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option determines whether the host should continue to boot in the event
of a non-fatal POST error."
::= { ilomCtrlSPARCHostControl 6 }
ilomCtrlSPARCHostPOSTStatus OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that describes the status of POST.
***NOTE: OS Boot status is ilomCtrlSPARCHostOSBootStatus."
::= { ilomCtrlSPARCHostControl 7 }
ilomCtrlSPARCHostAutoRestartPolicy OBJECT-TYPE
SYNTAX ILOMCtrlSPARCHostAutoRestartPolicy
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This determines what action the SP should take when it discovers that
the host is hung."
::= { ilomCtrlSPARCHostControl 8 }
ilomCtrlSPARCHostOSBootStatus OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that describes the boot status of host OS."
::= { ilomCtrlSPARCHostControl 9 }
ilomCtrlSPARCHostBootTimeout OBJECT-TYPE
SYNTAX Integer32 (0..36000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the boot timer time out value."
::= { ilomCtrlSPARCHostControl 10 }
ilomCtrlSPARCHostBootRestart OBJECT-TYPE
SYNTAX ILOMCtrlSPARCHostBootRestart
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This determines what action the SP should take when
the boot timer expires."
::= { ilomCtrlSPARCHostControl 11 }
ilomCtrlSPARCHostMaxBootFail OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the number of max boot failures allowed."
::= { ilomCtrlSPARCHostControl 12 }
ilomCtrlSPARCHostBootFailRecovery OBJECT-TYPE
SYNTAX ILOMCtrlSPARCHostBootFailRecovery
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This determines what action the SP should take when
the max boot failures are reached."
::= { ilomCtrlSPARCHostControl 13 }
ilomCtrlSPARCHostHypervisorVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the version string for Hypervisor."
::= { ilomCtrlSPARCHostControl 14 }
ilomCtrlSPARCHostSysFwVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the version string for SysFw."
::= { ilomCtrlSPARCHostControl 15 }
ilomCtrlSPARCHostSendBreakAction OBJECT-TYPE
SYNTAX ILOMCtrlSPARCHostSendBreakAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send Break Action to Host"
::= { ilomCtrlSPARCHostControl 16 }
ilomCtrlSPARCHostIoReconfigurePolicy OBJECT-TYPE
SYNTAX ILOMCtrlSPARCHostIoReconfigurePolicy
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This determines the host IO reconfiguration policy to apply on
next host power-on."
::= { ilomCtrlSPARCHostControl 17 }
ilomCtrlSPARCHostGMVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the version string for Guest Manager."
::= { ilomCtrlSPARCHostControl 18 }
-- ***************************************************************************
-- * ilomCtrlSPARCBootMode
-- ***************************************************************************
-- This section defines properties for configuring SPARC-specific boot mode
-- features.
ilomCtrlSPARCBootModeState OBJECT-TYPE
SYNTAX ILOMCtrlSPARCBootModeState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the boot mode state for the host. Specifying 'normal'
means that the host retains current NVRAM variable settings.
Specifying 'resetNvram' means that all NVRAM settings will be
reset to their default values."
::= { ilomCtrlSPARCBootMode 1 }
ilomCtrlSPARCBootModeScript OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the script to run when host boots."
::= { ilomCtrlSPARCBootMode 2 }
ilomCtrlSPARCBootModeExpires OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the date and time for when the boot mode configuration should
expire."
::= { ilomCtrlSPARCBootMode 3 }
ilomCtrlSPARCBootModeLDOMConfig OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string refers to the config name value that must either be
'default' or match a named LDOM configuration downloaded to
the service processor using the LDOM Manager."
::= { ilomCtrlSPARCBootMode 4 }
-- ***************************************************************************
-- * ilomCtrlSPARCKeySwitch
-- ***************************************************************************
-- This section defines properties for controlling the virtual key switch.
ilomCtrlSPARCKeySwitchState OBJECT-TYPE
SYNTAX ILOMCtrlSPARCKeySwitchState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the current state of the virtual key switch."
::= { ilomCtrlSPARCKeySwitch 1 }
-- ***************************************************************************
-- * ilomCtrlIdentification
-- ***************************************************************************
-- This section defines miscellaneous configuration parameters for the
-- service processor.
ilomCtrlSystemIdentifier OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string, which is often the host name of the server
associated with ILOM, will be sent out in the varbind
for all traps that ILOM generates."
::= { ilomCtrlIdentification 1 }
ilomCtrlHostName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string is the hostname for ILOM."
::= { ilomCtrlIdentification 2 }
-- ***************************************************************************
-- * ilomCtrlActiveDirectory
-- ***************************************************************************
-- This section defines properties for configuring the Active Directory client.
ilomCtrlActiveDirectoryEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the Active Directory client is enabled."
::= { ilomCtrlActiveDirectory 1 }
ilomCtrlActiveDirectoryIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Active Directory server used as a name service for
user accounts."
::= { ilomCtrlActiveDirectory 2 }
ilomCtrlActiveDirectoryPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port number for the Active Directory client. Specifying 0 as
the port means auto-select while specifying 1-65535 configures the actual port."
::= { ilomCtrlActiveDirectory 3 }
ilomCtrlActiveDirectoryDefaultRole OBJECT-TYPE
SYNTAX ILOMCtrlUserRole
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the role that a user authenticated via Active Directory should have.
Setting this property to 'Administrator' or 'Operator' will cause the
Active Directory client to ignore the schema stored on the AD server.
Setting this to 'none' clears the value and indicates that the native
Active Directory schema should be used.
***NOTE: this object is deprecated and replaced with
ilomCtrlActiveDirectoryDefaultRoles."
::= { ilomCtrlActiveDirectory 4 }
ilomCtrlActiveDirectoryCertFileURI OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the URI of a certificate file needed when Strict Cert Mode is
enabled. Setting the URI causes the tranfer of the file, making the
certificate available immediately for certificate authentication."
::= { ilomCtrlActiveDirectory 5 }
ilomCtrlActiveDirectoryTimeout OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of seconds to wait before timing out if the
Active Directory Server is not responding."
::= { ilomCtrlActiveDirectory 6 }
ilomCtrlActiveDirectoryStrictCertEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the Strict Cert Mode is enabled for
the Active Directory Client. If enabled, the Active Directory
certificate must be uploaded to the SP so that certificate
validation can be performed when communicating with the
Active Directory server."
::= { ilomCtrlActiveDirectory 7 }
ilomCtrlActiveDirectoryCertFileStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string indicating the status of the certificate file.
This is useful in determining whether a certificate file
is present or not."
::= { ilomCtrlActiveDirectory 8 }
ilomCtrlActiveDirUserDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlActiveDirUserDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure domain information required for
configuring the Active Directory client."
::= { ilomCtrlActiveDirectory 9 }
ilomCtrlActiveDirUserDomainEntry OBJECT-TYPE
SYNTAX ILOMCtrlActiveDirUserDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an Active Directory user domain."
INDEX { ilomCtrlActiveDirUserDomainId }
::= { ilomCtrlActiveDirUserDomainTable 1 }
ILOMCtrlActiveDirUserDomainEntry ::= SEQUENCE {
ilomCtrlActiveDirUserDomainId Integer32,
ilomCtrlActiveDirUserDomain SnmpAdminString
}
ilomCtrlActiveDirUserDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the Active Directory domain."
::= { ilomCtrlActiveDirUserDomainEntry 1 }
ilomCtrlActiveDirUserDomain OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string should match exactly with an authentication domain
on the Active Directory server. This string should contain
a substitution string '<USERNAME>' which will be replaced with the
user's login name during authentication. Either the principle
or distinguished name format is allowed."
::= { ilomCtrlActiveDirUserDomainEntry 2 }
ilomCtrlActiveDirAdminGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlActiveDirAdminGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure admin group information required for
configuring the Active Directory client."
::= { ilomCtrlActiveDirectory 10 }
ilomCtrlActiveDirAdminGroupsEntry OBJECT-TYPE
SYNTAX ILOMCtrlActiveDirAdminGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an Active Directory admin group."
INDEX { ilomCtrlActiveDirAdminGroupId }
::= { ilomCtrlActiveDirAdminGroupsTable 1 }
ILOMCtrlActiveDirAdminGroupsEntry ::= SEQUENCE {
ilomCtrlActiveDirAdminGroupId Integer32,
ilomCtrlActiveDirAdminGroupName SnmpAdminString
}
ilomCtrlActiveDirAdminGroupId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the Active Directory admin group entry."
::= { ilomCtrlActiveDirAdminGroupsEntry 1 }
ilomCtrlActiveDirAdminGroupName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string should contain a distinguished name that exactly matches
one of the group names on the ActiveDirectory server. Any user belonging
to one of these groups in this table will be assigned the ILOM role
of Administrator."
::= { ilomCtrlActiveDirAdminGroupsEntry 2 }
ilomCtrlActiveDirOperatorGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlActiveDirOperatorGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure operator group information required for
configuring the Active Directory client."
::= { ilomCtrlActiveDirectory 11 }
ilomCtrlActiveDirOperatorGroupsEntry OBJECT-TYPE
SYNTAX ILOMCtrlActiveDirOperatorGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an Active Directory operator group."
INDEX { ilomCtrlActiveDirOperatorGroupId }
::= { ilomCtrlActiveDirOperatorGroupsTable 1 }
ILOMCtrlActiveDirOperatorGroupsEntry ::= SEQUENCE {
ilomCtrlActiveDirOperatorGroupId Integer32,
ilomCtrlActiveDirOperatorGroupName SnmpAdminString
}
ilomCtrlActiveDirOperatorGroupId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the Active Directory operator group entry."
::= { ilomCtrlActiveDirOperatorGroupsEntry 1 }
ilomCtrlActiveDirOperatorGroupName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string should contain a distinguished name that exactly matches
one of the group names on the ActiveDirectory server. Any user belonging
to one of these groups in this table will be assigned the ILOM role
of Operator."
::= { ilomCtrlActiveDirOperatorGroupsEntry 2 }
ilomCtrlActiveDirAlternateServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlActiveDirAlternateServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to view and configure alternate server information
for the Active Directory client."
::= { ilomCtrlActiveDirectory 12 }
ilomCtrlActiveDirAlternateServerEntry OBJECT-TYPE
SYNTAX ILOMCtrlActiveDirAlternateServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an Active Directory alternate server."
INDEX { ilomCtrlActiveDirAlternateServerId }
::= { ilomCtrlActiveDirAlternateServerTable 1 }
ILOMCtrlActiveDirAlternateServerEntry ::= SEQUENCE {
ilomCtrlActiveDirAlternateServerId Integer32,
ilomCtrlActiveDirAlternateServerIp IpAddress,
ilomCtrlActiveDirAlternateServerPort Integer32,
ilomCtrlActiveDirAlternateServerCertStatus DisplayString,
ilomCtrlActiveDirAlternateServerCertURI SnmpAdminString,
ilomCtrlActiveDirAlternateServerCertClear TruthValue,
ilomCtrlActiveDirAlternateServerCertVersion DisplayString,
ilomCtrlActiveDirAlternateServerCertSerialNo DisplayString,
ilomCtrlActiveDirAlternateServerCertIssuer DisplayString,
ilomCtrlActiveDirAlternateServerCertSubject DisplayString,
ilomCtrlActiveDirAlternateServerCertValidBegin DisplayString,
ilomCtrlActiveDirAlternateServerCertValidEnd DisplayString
}
ilomCtrlActiveDirAlternateServerId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the Active Directory alternate server table."
::= { ilomCtrlActiveDirAlternateServerEntry 1 }
ilomCtrlActiveDirAlternateServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Active Directory alternate server
used as a name service for user accounts."
::= { ilomCtrlActiveDirAlternateServerEntry 2 }
ilomCtrlActiveDirAlternateServerPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port number for the Active Directory alternate server.
Specifying 0 as the port indicates that auto-select will use the
well known port number. Specifying 1-65535 is used to explicitly
set the port number."
::= { ilomCtrlActiveDirAlternateServerEntry 3 }
ilomCtrlActiveDirAlternateServerCertStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string indicating the status of the certificate file.
This is useful in determining whether a certificate file
is present or not."
::= { ilomCtrlActiveDirAlternateServerEntry 4 }
ilomCtrlActiveDirAlternateServerCertURI OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the URI of a certificate file needed when Strict Cert Mode is
enabled. Setting the URI causes the tranfer of the file, making the
certificate available immediately for certificate authentication.
Additionally, either 'remove' or 'restore' are supported for direct
certificate manipulation."
::= { ilomCtrlActiveDirAlternateServerEntry 5 }
ilomCtrlActiveDirAlternateServerCertClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A variable that will clear the certificate info associated
with the server when it is set to true."
::= { ilomCtrlActiveDirAlternateServerEntry 6 }
ilomCtrlActiveDirAlternateServerCertVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string indicating the certificate version of the
alternate server certificate file."
::= { ilomCtrlActiveDirAlternateServerEntry 7 }
ilomCtrlActiveDirAlternateServerCertSerialNo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the serial number of the alternate server
certificate file."
::= { ilomCtrlActiveDirAlternateServerEntry 8 }
ilomCtrlActiveDirAlternateServerCertIssuer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the issuer of the alternate server
certificate file."
::= { ilomCtrlActiveDirAlternateServerEntry 9 }
ilomCtrlActiveDirAlternateServerCertSubject OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the subject of the alternate server
certificate file."
::= { ilomCtrlActiveDirAlternateServerEntry 10 }
ilomCtrlActiveDirAlternateServerCertValidBegin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the valid start date of the alternate server
certificate file."
::= { ilomCtrlActiveDirAlternateServerEntry 11 }
ilomCtrlActiveDirAlternateServerCertValidEnd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the valid end date of the alternate server
certificate file."
::= { ilomCtrlActiveDirAlternateServerEntry 12 }
ilomCtrlActiveDirectoryLogDetail OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no messages logged
high(2), -- high messages only
medium(3), -- high + medium
low(4), -- high + medium + low
trace(5) -- high + medium + low + trace
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the amount of messages sent to the event log. The
high priority has the least number of messages going to the log,
while the lowest priority 'trace' has the most messages logged.
When this object is set to 'none', no messages are logged."
::= { ilomCtrlActiveDirectory 13 }
ilomCtrlActiveDirectoryDefaultRoles OBJECT-TYPE
SYNTAX ILOMCtrlUserRoles
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the role that a user authenticated via Active Directory should have.
Setting this property to legacy roles of 'Administrator' or 'Operator', or
any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's' will cause
the Active Directory client to ignore the schema stored on the AD server.
Setting this to 'none' clears the value and indicates that the native
Active Directory schema should be used. The role IDs can be joined
together 'aucros' where a-admin, u-user, c-console, r-reset,
s-service and o-readOnly."
::= { ilomCtrlActiveDirectory 14 }
ilomCtrlActiveDirCustomGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlActiveDirCustomGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure custom group information required for
configuring the Active Directory client."
::= { ilomCtrlActiveDirectory 15 }
ilomCtrlActiveDirCustomGroupsEntry OBJECT-TYPE
SYNTAX ILOMCtrlActiveDirCustomGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an Active Directory custom group."
INDEX { ilomCtrlActiveDirCustomGroupId }
::= { ilomCtrlActiveDirCustomGroupsTable 1 }
ILOMCtrlActiveDirCustomGroupsEntry ::= SEQUENCE {
ilomCtrlActiveDirCustomGroupId Integer32,
ilomCtrlActiveDirCustomGroupName SnmpAdminString,
ilomCtrlActiveDirCustomGroupRoles ILOMCtrlUserRoles
}
ilomCtrlActiveDirCustomGroupId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the Active Directory custom group entry."
::= { ilomCtrlActiveDirCustomGroupsEntry 1 }
ilomCtrlActiveDirCustomGroupName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string should contain a distinguished name that exactly matches
one of the group names on the ActiveDirectory server. Any user belonging
to one of these groups in this table will be assigned the ILOM role
based on the entry's configuration for roles."
::= { ilomCtrlActiveDirCustomGroupsEntry 2 }
ilomCtrlActiveDirCustomGroupRoles OBJECT-TYPE
SYNTAX ILOMCtrlUserRoles
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the role that a user authenticated via Active Directory should have.
Setting this property to legacy roles of 'Administrator' or 'Operator', or
any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's' will cause
the Active Directory client to ignore the schema stored on the AD server.
Setting this to 'none' clears the value and indicates that the native
Active Directory schema should be used. The role IDs can be joined
together 'aucros' where a-admin, u-user, c-console, r-reset,
s-service and o-readOnly."
::= { ilomCtrlActiveDirCustomGroupsEntry 3 }
ilomCtrlActiveDirectoryCertClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A variable that will clear the certificate info associated
with the server when it is set to true."
::= { ilomCtrlActiveDirectory 16 }
ilomCtrlActiveDirectoryCertVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string indicating the certificate version of the
certificate file."
::= { ilomCtrlActiveDirectory 17 }
ilomCtrlActiveDirectoryCertSerialNo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the serial number of the certificate file."
::= { ilomCtrlActiveDirectory 18 }
ilomCtrlActiveDirectoryCertIssuer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the issuer of the certificate file."
::= { ilomCtrlActiveDirectory 19 }
ilomCtrlActiveDirectoryCertSubject OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the subject of the certificate file."
::= { ilomCtrlActiveDirectory 20 }
ilomCtrlActiveDirectoryCertValidBegin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the valid start date of the certificate file."
::= { ilomCtrlActiveDirectory 21 }
ilomCtrlActiveDirectoryCertValidEnd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the valid end date of the certificate file."
::= { ilomCtrlActiveDirectory 22 }
ilomCtrlActiveDirDnsLocatorEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the Active Directory DNS Locator
functionality is enabled."
::= { ilomCtrlActiveDirectory 23 }
ilomCtrlActiveDirDnsLocatorQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlActiveDirDnsLocatorQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure DNS Locator search queries
used to locate the Active Directory server."
::= { ilomCtrlActiveDirectory 24 }
ilomCtrlActiveDirDnsLocatorQueryEntry OBJECT-TYPE
SYNTAX ILOMCtrlActiveDirDnsLocatorQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an Active Directory DNS Locator search query."
INDEX { ilomCtrlActiveDirDnsLocatorQueryId }
::= { ilomCtrlActiveDirDnsLocatorQueryTable 1 }
ILOMCtrlActiveDirDnsLocatorQueryEntry ::= SEQUENCE {
ilomCtrlActiveDirDnsLocatorQueryId Integer32,
ilomCtrlActiveDirDnsLocatorQueryService SnmpAdminString
}
ilomCtrlActiveDirDnsLocatorQueryId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the Active Directory DNS Locator Query entry."
::= { ilomCtrlActiveDirDnsLocatorQueryEntry 1 }
ilomCtrlActiveDirDnsLocatorQueryService OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string should contain the service name that will be used to
perform the DNS query. The name may contain '<DOMAIN>' as a
substitution marker, being replaced by the domain information
associated for the user at the time of authentication. Also, the
optional '<PORT: >' (ie <PORT:636> for standard LDAP/SSL port 636)
can be used to override any learned port information if necessary."
::= { ilomCtrlActiveDirDnsLocatorQueryEntry 2 }
ilomCtrlActiveDirExpSearchEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the Active Directory expanded search
query functionality is enabled."
::= { ilomCtrlActiveDirectory 25 }
ilomCtrlActiveDirStrictCredentialErrorEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not user credential errors for Active Directory
cause the user credentials to be completely errored out, or if the
credential validation is attempted using any alternate server. When
the parameter is true, the first user credential violation takes effect,
but when the mode is false, the same user credentionals can be
presented to other servers for authentication."
::= { ilomCtrlActiveDirectory 26 }
-- ***************************************************************************
-- * ilomCtrlSMTP
-- ***************************************************************************
-- This section provides properties for configuring the embedded SMTP
-- client.
ilomCtrlSMTPEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the SMTP client is enabled."
::= { ilomCtrlSMTP 1 }
ilomCtrlSMTPServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the SMTP server used as a name service for
user accounts."
::= { ilomCtrlSMTP 2 }
ilomCtrlSMTPPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port number for the SMTP client."
::= { ilomCtrlSMTP 3 }
ilomCtrlSMTPCustomSender OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An optional format to identify the sender or the 'from' address.
Customizing this string allows the user to specify the exact contents
(up to 80 chars) of the 'from' field in the email message. Either one
of the substitution strings '<IPADDRESS>' or '<HOSTNAME>' can be used
as needed. e.g., ilom-sp@sp1302.dev.sun.com, sun-ilom@[<IPADDRESS>],
or ilom-alert@<HOSTNAME>.abc.com. By default, this parameter is an
empty string. The 'from' field is formatted by either: 1) alert-rule
custom-sender, 2) smtp custom-sender, or 3) the standard ILOM originator."
DEFVAL { "" }
::= { ilomCtrlSMTP 4 }
-- ***************************************************************************
-- * ilomCtrlThd
-- ***************************************************************************
-- This section provides Telemetry Harness Daemon (THD) status and control,
-- as well as status and control for THD modules.
ilomCtrlThdState OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the THD daemon."
::= { ilomCtrlThd 1 }
ilomCtrlThdAction OBJECT-TYPE
SYNTAX ILOMCtrlThdAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control action for THD daemon, either suspend or resume."
::= { ilomCtrlThd 2 }
ilomCtrlThdModulesTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlThdModulesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing the currently loaded THD modules."
::= { ilomCtrlThd 3 }
ilomCtrlThdModulesEntry OBJECT-TYPE
SYNTAX ILOMCtrlThdModulesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a currently loaded THD module."
INDEX { ilomCtrlThdModuleName }
::= { ilomCtrlThdModulesTable 1 }
ILOMCtrlThdModulesEntry ::= SEQUENCE {
ilomCtrlThdModuleName ILOMCtrlTargetIndex,
ilomCtrlThdModuleDesc SnmpAdminString,
ilomCtrlThdModuleState SnmpAdminString,
ilomCtrlThdModuleAction ILOMCtrlThdAction
}
ilomCtrlThdModuleName OBJECT-TYPE
SYNTAX ILOMCtrlTargetIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the THD module."
::= { ilomCtrlThdModulesEntry 1 }
ilomCtrlThdModuleDesc OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the THD module."
::= { ilomCtrlThdModulesEntry 2 }
ilomCtrlThdModuleState OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the THD module."
::= { ilomCtrlThdModulesEntry 3 }
ilomCtrlThdModuleAction OBJECT-TYPE
SYNTAX ILOMCtrlThdAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control action for the THD module."
::= { ilomCtrlThdModulesEntry 4 }
ilomCtrlThdInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlThdInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing instances of currently loaded THD modules."
::= { ilomCtrlThd 4 }
ilomCtrlThdInstanceEntry OBJECT-TYPE
SYNTAX ILOMCtrlThdInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a currently loaded THD module."
INDEX { ilomCtrlThdModName, ilomCtrlThdInstanceName }
::= { ilomCtrlThdInstanceTable 1 }
ILOMCtrlThdInstanceEntry ::= SEQUENCE {
ilomCtrlThdModName ILOMCtrlModTargetIndex,
ilomCtrlThdInstanceName ILOMCtrlInstanceTargetIndex,
ilomCtrlThdInstanceState SnmpAdminString,
ilomCtrlThdInstanceAction ILOMCtrlThdAction
}
ilomCtrlThdModName OBJECT-TYPE
SYNTAX ILOMCtrlModTargetIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the THD class of the instance."
::= { ilomCtrlThdInstanceEntry 1 }
ilomCtrlThdInstanceName OBJECT-TYPE
SYNTAX ILOMCtrlInstanceTargetIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the instance."
::= { ilomCtrlThdInstanceEntry 2 }
ilomCtrlThdInstanceState OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the instance."
::= { ilomCtrlThdInstanceEntry 3 }
ilomCtrlThdInstanceAction OBJECT-TYPE
SYNTAX ILOMCtrlThdAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control action for instance."
::= { ilomCtrlThdInstanceEntry 4 }
-- ***************************************************************************
-- * ilomCtrlLdapSsl
-- * This section defines properties for configuring the Ldap/ssl client.
-- ***************************************************************************
ilomCtrlLdapSslGlobalObj OBJECT IDENTIFIER ::= { ilomCtrlLdapSsl 1 }
ilomCtrlLdapSslEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the LDAP/SSL client is enabled."
::= { ilomCtrlLdapSslGlobalObj 1 }
ilomCtrlLdapSslIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the LDAP/SSL server used as a directory service for
user accounts."
::= { ilomCtrlLdapSslGlobalObj 2 }
ilomCtrlLdapSslPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port number for the LDAP/SSL client. Specifying 0 as
the port means auto-select while specifying 1-65535 configures the
actual port value."
::= { ilomCtrlLdapSslGlobalObj 3 }
ilomCtrlLdapSslDefaultRole OBJECT-TYPE
SYNTAX ILOMCtrlUserRole
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the role that a user authenticated via LDAP/SSL should have.
Setting this property to 'Administrator' or 'Operator' will cause the
LDAP/SSL client to ignore the schema stored on the server. The user
will be granted the corresponding access level. Setting this to an
empty string, or 'none' clears the value and indicates that the native
LDAP/SSL schema should be used."
::= { ilomCtrlLdapSslGlobalObj 4 }
ilomCtrlLdapSslCertFileURI OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tftp URI of the LDAP/SSL server's certificate file that should
be uploaded in order to perform certificate validation. Setting
the URI causes the tranfer of the specified file, making the
certificate available immediately for certificate authentication.
The server certificate file is needed when Strict Cert Mode
is enabled. Additionally, either 'remove' or 'restore' are
supported for direct certificate manipulation."
::= { ilomCtrlLdapSslGlobalObj 5 }
ilomCtrlLdapSslTimeout OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of seconds to wait before timing out if the
LDAP/SSL Server is not responding."
::= { ilomCtrlLdapSslGlobalObj 6 }
ilomCtrlLdapSslStrictCertEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the Strict Cert Mode is enabled for
the LDAP/SSL Client. If enabled, the LDAP/SSL server's
certificate must be uploaded to the SP so that certificate
validation can be performed when communicating with the
LDAP/SSL server."
::= { ilomCtrlLdapSslGlobalObj 7 }
ilomCtrlLdapSslCertFileStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string indicating the status of the certificate file.
This is useful in determining whether a certificate file
is present or not."
::= { ilomCtrlLdapSslGlobalObj 8 }
ilomCtrlLdapSslLogDetail OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no messages logged
high(2), -- high messages only
medium(3), -- high + medium
low(4), -- high + medium + low
trace(5) -- high + medium + low + trace
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the amount of messages sent to the event log. The
high priority has the least number of messages going to the log,
while the lowest priority 'trace' has the most messages logged.
When this object is set to 'none', no messages are logged."
::= { ilomCtrlLdapSslGlobalObj 9 }
ilomCtrlLdapSslDefaultRoles OBJECT-TYPE
SYNTAX ILOMCtrlUserRoles
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the role that a user authenticated via LDAP/SSL should have.
Setting this property to legacy roles of 'Administrator' or 'Operator', or
any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's' will cause
the LDAP/SSL client to ignore the schema stored on the LDAP server.
Setting this to 'none' clears the value and indicates that the native
LDAP/SSL schema should be used. The role IDs can be joined
together 'aucros' where a-admin, u-user, c-console, r-reset,
s-service and o-readOnly."
::= { ilomCtrlLdapSslGlobalObj 10 }
ilomCtrlLdapSslCertFileClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A variable that will clear the certificate info associated
with the server when it is set to true."
::= { ilomCtrlLdapSslGlobalObj 11 }
ilomCtrlLdapSslCertFileVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string indicating the certificate version of the
certificate file."
::= { ilomCtrlLdapSslGlobalObj 12 }
ilomCtrlLdapSslCertFileSerialNo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the serial number of the certificate file."
::= { ilomCtrlLdapSslGlobalObj 13 }
ilomCtrlLdapSslCertFileIssuer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the issuer of the certificate file."
::= { ilomCtrlLdapSslGlobalObj 14 }
ilomCtrlLdapSslCertFileSubject OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the subject of the certificate file."
::= { ilomCtrlLdapSslGlobalObj 15 }
ilomCtrlLdapSslCertFileValidBegin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the valid start date of the certificate file."
::= { ilomCtrlLdapSslGlobalObj 16 }
ilomCtrlLdapSslCertFileValidEnd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the valid end date of the certificate file."
::= { ilomCtrlLdapSslGlobalObj 17 }
ilomCtrlLdapSslOptUsrMappingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not the optional UserMapping feature is enabled. When
this feature is enabled, a typical Manager style ldap bind is done first
using the specified credentials for the bindDn and bindPw. Then, the
user's login name is used as part of the search/filter criteria defined
in the attribute-info to obtain the user's official Distinguished Name."
::= { ilomCtrlLdapSslGlobalObj 18 }
ilomCtrlLdapSslOptUsrMappingAttrInfo OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The attribute information used to lookup the user login name to
the user's Distinguished Name (DN). Typically, it looks very much
like a standard LDAP query or filter. The <USERNAME> prefix will
be replaced with the login name as part of the query
eg: (&(objectclass=person)(uid=<USERNAME>))."
::= { ilomCtrlLdapSslGlobalObj 19 }
ilomCtrlLdapSslOptUsrMappingBindDn OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Distinguished Name used for the manager style ldap bind so
that user lookups can be done."
::= { ilomCtrlLdapSslGlobalObj 20 }
ilomCtrlLdapSslOptUsrMappingBindPw OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password string used for the manager style ldap bind."
::= { ilomCtrlLdapSslGlobalObj 21 }
ilomCtrlLdapSslOptUsrMappingSearchBase OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The search based used to attempt the user name look up as defined
in the attribute information above."
::= { ilomCtrlLdapSslGlobalObj 22 }
--
-- Domain Table
--
ilomCtrlLdapSslUserDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlLdapSslUserDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure domain information required for
configuring the LDAP/SSL client."
::= { ilomCtrlLdapSsl 2 }
ilomCtrlLdapSslUserDomainEntry OBJECT-TYPE
SYNTAX ILOMCtrlLdapSslUserDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an LDAP/SSL user domain."
INDEX { ilomCtrlLdapSslUserDomainId }
::= { ilomCtrlLdapSslUserDomainTable 1 }
ILOMCtrlLdapSslUserDomainEntry ::= SEQUENCE {
ilomCtrlLdapSslUserDomainId Integer32,
ilomCtrlLdapSslUserDomain SnmpAdminString
}
ilomCtrlLdapSslUserDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the LDAP/SSL domain."
::= { ilomCtrlLdapSslUserDomainEntry 1 }
ilomCtrlLdapSslUserDomain OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string should match exactly with an authentication domain
on the LDAP/SSL server. This string should contain
a substitution string '<USERNAME>' which will be replaced with the
user's login name during authentication. Either the principle
or distinguished name format is allowed."
::= { ilomCtrlLdapSslUserDomainEntry 2 }
--
-- Admin Group Table
--
ilomCtrlLdapSslAdminGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlLdapSslAdminGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure Admin Group information required for
configuring the LDAP/SSL client."
::= { ilomCtrlLdapSsl 3 }
ilomCtrlLdapSslAdminGroupsEntry OBJECT-TYPE
SYNTAX ILOMCtrlLdapSslAdminGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an LDAP/SSL Admin Group."
INDEX { ilomCtrlLdapSslAdminGroupId }
::= { ilomCtrlLdapSslAdminGroupsTable 1 }
ILOMCtrlLdapSslAdminGroupsEntry ::= SEQUENCE {
ilomCtrlLdapSslAdminGroupId Integer32,
ilomCtrlLdapSslAdminGroupName SnmpAdminString
}
ilomCtrlLdapSslAdminGroupId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the LDAP/SSL AdminGroup entry."
::= { ilomCtrlLdapSslAdminGroupsEntry 1 }
ilomCtrlLdapSslAdminGroupName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string should contain a distinguished name that exactly matches
one of the group names on the LDAP/SSL server. Any user belonging
to one of these groups in this table will be assigned the ILOM role
of Administrator."
::= { ilomCtrlLdapSslAdminGroupsEntry 2 }
--
-- Operator Group Table
--
ilomCtrlLdapSslOperatorGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlLdapSslOperatorGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure Operator Group information required for
configuring the LDAP/SSL client."
::= { ilomCtrlLdapSsl 4 }
ilomCtrlLdapSslOperatorGroupsEntry OBJECT-TYPE
SYNTAX ILOMCtrlLdapSslOperatorGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an LDAP/SSL Operator Group."
INDEX { ilomCtrlLdapSslOperatorGroupId }
::= { ilomCtrlLdapSslOperatorGroupsTable 1 }
ILOMCtrlLdapSslOperatorGroupsEntry ::= SEQUENCE {
ilomCtrlLdapSslOperatorGroupId Integer32,
ilomCtrlLdapSslOperatorGroupName SnmpAdminString
}
ilomCtrlLdapSslOperatorGroupId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the LDAP/SSL Operator Group entry."
::= { ilomCtrlLdapSslOperatorGroupsEntry 1 }
ilomCtrlLdapSslOperatorGroupName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string should contain a distinguished name that exactly matches
one of the group names on the LDAP/SSL server. Any user belonging
to one of these groups in this table will be assigned the ILOM role
of Operator."
::= { ilomCtrlLdapSslOperatorGroupsEntry 2 }
--
-- Alternate Server Table
--
ilomCtrlLdapSslAlternateServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlLdapSslAlternateServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to view and configure alternate server information
for the LDAP/SSL client."
::= { ilomCtrlLdapSsl 5 }
ilomCtrlLdapSslAlternateServerEntry OBJECT-TYPE
SYNTAX ILOMCtrlLdapSslAlternateServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an LDAP/SSL alternate server table."
INDEX { ilomCtrlLdapSslAlternateServerId }
::= { ilomCtrlLdapSslAlternateServerTable 1 }
ILOMCtrlLdapSslAlternateServerEntry ::= SEQUENCE {
ilomCtrlLdapSslAlternateServerId Integer32,
ilomCtrlLdapSslAlternateServerIp IpAddress,
ilomCtrlLdapSslAlternateServerPort Integer32,
ilomCtrlLdapSslAlternateServerCertStatus DisplayString,
ilomCtrlLdapSslAlternateServerCertURI SnmpAdminString,
ilomCtrlLdapSslAlternateServerCertClear TruthValue,
ilomCtrlLdapSslAlternateServerCertVersion DisplayString,
ilomCtrlLdapSslAlternateServerCertSerialNo DisplayString,
ilomCtrlLdapSslAlternateServerCertIssuer DisplayString,
ilomCtrlLdapSslAlternateServerCertSubject DisplayString,
ilomCtrlLdapSslAlternateServerCertValidBegin DisplayString,
ilomCtrlLdapSslAlternateServerCertValidEnd DisplayString
}
ilomCtrlLdapSslAlternateServerId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the LDAP/SSL alternate server table."
::= { ilomCtrlLdapSslAlternateServerEntry 1 }
ilomCtrlLdapSslAlternateServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the LDAP/SSL alternate server
used as directory server for user accounts."
::= { ilomCtrlLdapSslAlternateServerEntry 2 }
ilomCtrlLdapSslAlternateServerPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port number for the LDAP/SSL alternate server.
Specifying 0 as the port indicates that auto-select will use the
well known port number. Specifying 1-65535 is used to explicitly
set the port number."
::= { ilomCtrlLdapSslAlternateServerEntry 3 }
ilomCtrlLdapSslAlternateServerCertStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string indicating the status of the certificate file.
This is useful in determining whether a certificate file
is present or not."
::= { ilomCtrlLdapSslAlternateServerEntry 4 }
ilomCtrlLdapSslAlternateServerCertURI OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the URI of a certificate file needed when Strict Cert Mode is
enabled. Setting the URI causes the tranfer of the file, making the
certificate available immediately for certificate authentication.
Additionally, either 'remove' or 'restore' are supported for direct
certificate manipulation."
::= { ilomCtrlLdapSslAlternateServerEntry 5 }
ilomCtrlLdapSslAlternateServerCertClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A variable that will clear the certificate info associated
with the server when it is set to true."
::= { ilomCtrlLdapSslAlternateServerEntry 6 }
ilomCtrlLdapSslAlternateServerCertVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string indicating the certificate version of the
alternate server certificate file."
::= { ilomCtrlLdapSslAlternateServerEntry 7 }
ilomCtrlLdapSslAlternateServerCertSerialNo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the serial number of the alternate server
certificate file."
::= { ilomCtrlLdapSslAlternateServerEntry 8 }
ilomCtrlLdapSslAlternateServerCertIssuer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the issuer of the alternate server
certificate file."
::= { ilomCtrlLdapSslAlternateServerEntry 9 }
ilomCtrlLdapSslAlternateServerCertSubject OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the subject of the alternate server
certificate file."
::= { ilomCtrlLdapSslAlternateServerEntry 10 }
ilomCtrlLdapSslAlternateServerCertValidBegin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the valid start date of the alternate server
certificate file."
::= { ilomCtrlLdapSslAlternateServerEntry 11 }
ilomCtrlLdapSslAlternateServerCertValidEnd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string showing the valid end date of the alternate server
certificate file."
::= { ilomCtrlLdapSslAlternateServerEntry 12 }
--
-- Custom Group Table
--
ilomCtrlLdapSslCustomGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ILOMCtrlLdapSslCustomGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure custom group information required for
configuring the LDAP/SSL client."
::= { ilomCtrlLdapSsl 6 }
ilomCtrlLdapSslCustomGroupsEntry OBJECT-TYPE
SYNTAX ILOMCtrlLdapSslCustomGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for an LDAP/SSLcustom group."
INDEX { ilomCtrlLdapSslCustomGroupId }
::= { ilomCtrlLdapSslCustomGroupsTable 1 }
ILOMCtrlLdapSslCustomGroupsEntry ::= SEQUENCE {
ilomCtrlLdapSslCustomGroupId Integer32,
ilomCtrlLdapSslCustomGroupName SnmpAdminString,
ilomCtrlLdapSslCustomGroupRoles ILOMCtrlUserRoles
}
ilomCtrlLdapSslCustomGroupId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer identifier of the LDAP/SSL custom group entry."
::= { ilomCtrlLdapSslCustomGroupsEntry 1 }
ilomCtrlLdapSslCustomGroupName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This string should contain a distinguished name that exactly matches
one of the group names on the LDAP/SSL server. Any user belonging
to one of these groups in this table will be assigned the ILOM role
based on the entry's configuration for roles."
::= { ilomCtrlLdapSslCustomGroupsEntry 2 }
ilomCtrlLdapSslCustomGroupRoles OBJECT-TYPE
SYNTAX ILOMCtrlUserRoles
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the role that a user authenticated via LDAP/SSL should have.
Setting this property to legacy roles of 'Administrator' or 'Operator', or
any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's' will cause
the LDAP/SSL client to ignore the schema stored on the LDAP/SSL server.
Setting this to 'none' clears the value and indicates that the native
LDAP/SSL schema should be used. The role IDs can be joined
together 'aucros' where a-admin, u-user, c-console, r-reset,
s-service and o-readOnly."
::= { ilomCtrlLdapSslCustomGroupsEntry 3 }
-- ***************************************************************************
-- * ilomCtrlDNS
-- ***************************************************************************
-- This section provides properties for configuring the DNS nameserver and
-- searchpath.
ilomCtrlDNSNameServers OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the nameserver for DNS."
::= { ilomCtrlDNS 1 }
ilomCtrlDNSSearchPath OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the searchpath for DNS."
::= { ilomCtrlDNS 2 }
ilomCtrlDNSdhcpAutoDns OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not DHCP autodns is enabled."
::= { ilomCtrlDNS 3 }
ilomCtrlDNSTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of seconds to wait before timing out if
the server does not respond."
DEFVAL { 5 }
::= { ilomCtrlDNS 4 }
ilomCtrlDNSRetries OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of times a request is attempted again, after
a timeout."
DEFVAL { 1 }
::= { ilomCtrlDNS 5 }
--
-- Object Groups
--
ilomCtrlObjectsGroup OBJECT-GROUP
OBJECTS {
ilomCtrlDeviceNTPServerOneIP,
ilomCtrlDeviceNTPServerTwoIP,
ilomCtrlLdapEnabled,
ilomCtrlLdapServerIP,
ilomCtrlLdapPortNumber,
ilomCtrlLdapBindDn,
ilomCtrlLdapBindPassword,
ilomCtrlLdapSearchBase,
ilomCtrlLdapDefaultRoles,
ilomCtrlRadiusEnabled,
ilomCtrlRadiusServerIP,
ilomCtrlRadiusPortNumber,
ilomCtrlRadiusSecret,
ilomCtrlRadiusDefaultRoles,
ilomCtrlRemoteSyslogDest1,
ilomCtrlRemoteSyslogDest2,
ilomCtrlActiveDirectoryEnabled,
ilomCtrlActiveDirectoryIP,
ilomCtrlActiveDirectoryPortNumber,
ilomCtrlActiveDirectoryCertFileURI,
ilomCtrlActiveDirectoryTimeout,
ilomCtrlActiveDirectoryStrictCertEnabled,
ilomCtrlActiveDirectoryCertFileStatus,
ilomCtrlActiveDirUserDomain,
ilomCtrlActiveDirAdminGroupName,
ilomCtrlActiveDirOperatorGroupName,
ilomCtrlActiveDirCustomGroupName,
ilomCtrlActiveDirCustomGroupRoles,
ilomCtrlActiveDirAlternateServerIp,
ilomCtrlActiveDirAlternateServerPort,
ilomCtrlActiveDirAlternateServerCertStatus,
ilomCtrlActiveDirAlternateServerCertURI,
ilomCtrlActiveDirAlternateServerCertClear,
ilomCtrlActiveDirAlternateServerCertVersion,
ilomCtrlActiveDirAlternateServerCertSerialNo,
ilomCtrlActiveDirAlternateServerCertIssuer,
ilomCtrlActiveDirAlternateServerCertSubject,
ilomCtrlActiveDirAlternateServerCertValidBegin,
ilomCtrlActiveDirAlternateServerCertValidEnd,
ilomCtrlActiveDirectoryLogDetail,
ilomCtrlActiveDirectoryDefaultRoles,
ilomCtrlActiveDirectoryCertClear,
ilomCtrlActiveDirectoryCertVersion,
ilomCtrlActiveDirectoryCertSerialNo,
ilomCtrlActiveDirectoryCertIssuer,
ilomCtrlActiveDirectoryCertSubject,
ilomCtrlActiveDirectoryCertValidBegin,
ilomCtrlActiveDirectoryCertValidEnd,
ilomCtrlActiveDirDnsLocatorEnabled,
ilomCtrlActiveDirDnsLocatorQueryService,
ilomCtrlActiveDirExpSearchEnabled,
ilomCtrlActiveDirStrictCredentialErrorEnabled,
ilomCtrlSMTPEnabled,
ilomCtrlSMTPServerIP,
ilomCtrlSMTPPortNumber,
ilomCtrlSMTPCustomSender,
ilomCtrlLdapSslEnabled,
ilomCtrlLdapSslIP,
ilomCtrlLdapSslPortNumber,
ilomCtrlLdapSslDefaultRole,
ilomCtrlLdapSslCertFileURI,
ilomCtrlLdapSslTimeout,
ilomCtrlLdapSslStrictCertEnabled,
ilomCtrlLdapSslCertFileStatus,
ilomCtrlLdapSslLogDetail,
ilomCtrlLdapSslDefaultRoles,
ilomCtrlLdapSslCertFileClear,
ilomCtrlLdapSslCertFileVersion,
ilomCtrlLdapSslCertFileSerialNo,
ilomCtrlLdapSslCertFileIssuer,
ilomCtrlLdapSslCertFileSubject,
ilomCtrlLdapSslCertFileValidBegin,
ilomCtrlLdapSslCertFileValidEnd,
ilomCtrlLdapSslOptUsrMappingEnabled,
ilomCtrlLdapSslOptUsrMappingAttrInfo,
ilomCtrlLdapSslOptUsrMappingBindDn,
ilomCtrlLdapSslOptUsrMappingBindPw,
ilomCtrlLdapSslOptUsrMappingSearchBase,
ilomCtrlLdapSslUserDomain,
ilomCtrlLdapSslAdminGroupName,
ilomCtrlLdapSslOperatorGroupName,
ilomCtrlLdapSslCustomGroupName,
ilomCtrlLdapSslCustomGroupRoles,
ilomCtrlLdapSslAlternateServerIp,
ilomCtrlLdapSslAlternateServerPort,
ilomCtrlLdapSslAlternateServerCertStatus,
ilomCtrlLdapSslAlternateServerCertURI,
ilomCtrlLdapSslAlternateServerCertClear,
ilomCtrlLdapSslAlternateServerCertVersion,
ilomCtrlLdapSslAlternateServerCertSerialNo,
ilomCtrlLdapSslAlternateServerCertIssuer,
ilomCtrlLdapSslAlternateServerCertSubject,
ilomCtrlLdapSslAlternateServerCertValidBegin,
ilomCtrlLdapSslAlternateServerCertValidEnd,
ilomCtrlHttpEnabled,
ilomCtrlHttpPortNumber,
ilomCtrlHttpSecureRedirect,
ilomCtrlHttpsEnabled,
ilomCtrlHttpsPortNumber,
ilomCtrlSshRsaKeyFingerprint,
ilomCtrlSshRsaKeyLength,
ilomCtrlSshDsaKeyFingerprint,
ilomCtrlSshDsaKeyLength,
ilomCtrlSshGenerateNewKeyAction,
ilomCtrlSshGenerateNewKeyType,
ilomCtrlSshRestartSshdAction,
ilomCtrlSshEnabled,
ilomCtrlSingleSignonEnabled,
ilomCtrlNetworkMacAddress,
ilomCtrlNetworkIpDiscovery,
ilomCtrlNetworkIpAddress,
ilomCtrlNetworkIpGateway,
ilomCtrlNetworkIpNetmask,
ilomCtrlNetworkPendingIpDiscovery,
ilomCtrlNetworkPendingIpAddress,
ilomCtrlNetworkPendingIpGateway,
ilomCtrlNetworkPendingIpNetmask,
ilomCtrlNetworkCommitPending,
ilomCtrlNetworkDHCPServerAddr,
ilomCtrlNetworkPendingManagementPort,
ilomCtrlNetworkManagementPort,
ilomCtrlNetworkOutOfBandMacAddress,
ilomCtrlNetworkSidebandMacAddress,
ilomCtrlNetworkState,
ilomCtrlLocalUserPassword,
ilomCtrlLocalUserRoles,
ilomCtrlLocalUserRowStatus,
ilomCtrlLocalUserCLIMode,
ilomCtrlSessionsUsername,
ilomCtrlSessionsConnectionType,
ilomCtrlSessionsLoginTime,
ilomCtrlFirmwareMgmtVersion,
ilomCtrlFirmwareBuildNumber,
ilomCtrlFirmwareBuildDate,
ilomCtrlFirmwareTFTPServerIP,
ilomCtrlFirmwareTFTPFileName,
ilomCtrlFirmwarePreserveConfig,
ilomCtrlFirmwareMgmtStatus,
ilomCtrlFirmwareMgmtAction,
ilomCtrlFirmwareMgmtFilesystemVersion,
ilomCtrlFirmwareDelayBIOS,
ilomCtrlEventLogType,
ilomCtrlEventLogTimestamp,
ilomCtrlEventLogClass,
ilomCtrlEventLogSeverity,
ilomCtrlEventLogDescription,
ilomCtrlEventLogClear,
ilomCtrlAlertSeverity,
ilomCtrlAlertType,
ilomCtrlAlertDestinationIP,
ilomCtrlAlertDestinationPort,
ilomCtrlAlertDestinationEmail,
ilomCtrlAlertSNMPVersion,
ilomCtrlAlertSNMPCommunityOrUsername,
ilomCtrlAlertEmailEventClassFilter,
ilomCtrlAlertEmailEventTypeFilter,
ilomCtrlAlertEmailCustomSender,
ilomCtrlAlertEmailMessagePrefix,
ilomCtrlDateAndTime,
ilomCtrlNTPEnabled,
ilomCtrlTimezone,
ilomCtrlSerialInternalPortPresent,
ilomCtrlSerialInternalPortBaudRate,
ilomCtrlSerialExternalPortPresent,
ilomCtrlSerialExternalPortBaudRate,
ilomCtrlSerialExternalPortFlowControl,
ilomCtrlPowerAction,
ilomCtrlResetAction,
ilomCtrlRedundancyStatus,
ilomCtrlRedundancyAction,
ilomCtrlRedundancyFRUName,
ilomCtrlPolicyShortStr,
ilomCtrlPolicyLongStr,
ilomCtrlPolicyEnabled,
ilomCtrlResetToDefaultsAction,
ilomCtrlSPARCDiagsTrigger,
ilomCtrlSPARCDiagsMode,
ilomCtrlSPARCDiagsPowerOnLevel,
ilomCtrlSPARCDiagsUserResetLevel,
ilomCtrlSPARCDiagsErrorResetLevel,
ilomCtrlSPARCDiagsPowerOnVerbosity,
ilomCtrlSPARCDiagsUserResetVerbosity,
ilomCtrlSPARCDiagsErrorResetVerbosity,
ilomCtrlSPARCDiagsStatus,
ilomCtrlSPARCDiagsAction,
ilomCtrlSPARCDiagsHwChangeLevel,
ilomCtrlSPARCDiagsHwChangeVerbosity,
ilomCtrlSPARCHostMACAddress,
ilomCtrlSPARCHostOBPVersion,
ilomCtrlSPARCHostPOSTVersion,
ilomCtrlSPARCHostAutoRunOnError,
ilomCtrlSPARCHostPOSTStatus,
ilomCtrlSPARCHostAutoRestartPolicy,
ilomCtrlSPARCHostIoReconfigurePolicy,
ilomCtrlSPARCHostOSBootStatus,
ilomCtrlSPARCHostBootTimeout,
ilomCtrlSPARCHostBootRestart,
ilomCtrlSPARCHostMaxBootFail,
ilomCtrlSPARCHostBootFailRecovery,
ilomCtrlSPARCHostHypervisorVersion,
ilomCtrlSPARCHostSysFwVersion,
ilomCtrlSPARCHostGMVersion,
ilomCtrlSPARCHostSendBreakAction,
ilomCtrlSPARCBootModeState,
ilomCtrlSPARCBootModeScript,
ilomCtrlSPARCBootModeExpires,
ilomCtrlSPARCBootModeLDOMConfig,
ilomCtrlSPARCKeySwitchState,
ilomCtrlSystemIdentifier,
ilomCtrlHostName,
ilomCtrlThdState,
ilomCtrlThdAction,
ilomCtrlThdModuleDesc,
ilomCtrlThdModuleState,
ilomCtrlThdModuleAction,
ilomCtrlThdInstanceState,
ilomCtrlThdInstanceAction,
ilomCtrlBackupAndRestoreTargetURI,
ilomCtrlBackupAndRestorePassphrase,
ilomCtrlBackupAndRestoreAction,
ilomCtrlBackupAndRestoreActionStatus,
ilomCtrlDNSNameServers,
ilomCtrlDNSSearchPath,
ilomCtrlDNSdhcpAutoDns,
ilomCtrlDNSTimeout,
ilomCtrlDNSRetries
}
STATUS current
DESCRIPTION
"The group of current objects."
::= { ilomCtrlGroups 2 }
ilomCtrlDeprecatedObjectsGroup OBJECT-GROUP
OBJECTS {
ilomCtrlLdapDefaultRole,
ilomCtrlRadiusDefaultRole,
ilomCtrlLocalUserAuthPassword,
ilomCtrlLocalUserAuthRole,
ilomCtrlLocalUserAuthRowStatus,
ilomCtrlLocalUserAuthCLIMode,
ilomCtrlSPARCDiagsLevel,
ilomCtrlSPARCDiagsVerbosity,
ilomCtrlActiveDirectoryDefaultRole
}
STATUS deprecated
DESCRIPTION
"The objects that have been deprecated."
::= { ilomCtrlGroups 1 }
END
View Git Blame Copy Permalink