122991 lines
4.4 MiB
122991 lines
4.4 MiB
RAPID-CITY DEFINITIONS ::= BEGIN
|
|
|
|
-- ISSUES
|
|
--
|
|
-- NOTE: THIS IS NOT AN OFFICIAL RELEASE
|
|
-- This is an unofficial merge of VSP9K 4.1.0.0, VOSS 6.1.3.0,
|
|
-- 8800 7.2.21.0, ERS 4K 5.9.2, ERS 5K 7.0.1 variants of this MIB
|
|
|
|
IMPORTS
|
|
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Gauge32, Integer32, Unsigned32, Counter32, Counter64,
|
|
enterprises, IpAddress, TimeTicks FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus, TruthValue, MacAddress,
|
|
DisplayString, PhysAddress, DateAndTime, TimeStamp,
|
|
RowPointer, StorageType, TimeInterval FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
AtmAddr FROM ATM-TC-MIB
|
|
ifIndex,ifAdminStatus, ifOperStatus FROM IF-MIB
|
|
InetAddressType, InetAddress, InetAddressPrefixLength,
|
|
InetPortNumber, InetAutonomousSystemNumber FROM INET-ADDRESS-MIB
|
|
Ipv6IfIndex, Ipv6Address, Ipv6AddressPrefix,
|
|
Ipv6AddressIfIdentifier, Ipv6IfIndexOrZero FROM IPV6-TC
|
|
igmpInterfaceIfIndex, igmpInterfaceQuerier,
|
|
igmpCacheAddress, igmpCacheIfIndex FROM IGMP-STD-MIB
|
|
dvmrpInterfaceIfIndex, dvmrpNeighborIfIndex,
|
|
dvmrpNeighborAddress, dvmrpInterfaceOperState FROM DVMRP-MIB
|
|
ipNetToMediaNetAddress, ipNetToMediaPhysAddress FROM IP-MIB
|
|
VrId FROM VRRP-MIB
|
|
PolicyAppType FROM LLDP-EXT-MED-MIB
|
|
SnmpAdminString,SnmpSecurityLevel,SnmpSecurityModel FROM SNMP-FRAMEWORK-MIB
|
|
IndexInteger FROM DIFFSERV-MIB
|
|
MplsTunnelIndex, MplsLabel, MplsExtendedTunnelId,
|
|
MplsTunnelInstanceIndex, MplsLdpIdentifier, MplsLSPID FROM MPLS-TC-STD-MIB
|
|
bgpPeerRemoteAddr, bgpPeerLastError, bgpPeerState FROM BGP4-MIB
|
|
secyIfEntry FROM IEEE8021-SECY-MIB
|
|
AddressFamilyNumbers,
|
|
LldpManAddress, LldpSystemCapabilitiesMap,
|
|
LldpPortIdSubtype, LldpPortId, lldpRemEntry FROM LLDP-MIB
|
|
ipv6RouteEntry FROM IPV6-MIB
|
|
mldInterfaceQuerier, mldInterfaceIfIndex FROM IPV6-MLD-MIB
|
|
msdpPeerFsmEstablishedTransitions, msdpPeerState,
|
|
msdpPeerEntry, msdpSACacheEntry FROM MSDP-MIB
|
|
ipMRouteEntry, ipMRouteNextHopEntry,
|
|
ipMRouteInterfaceEntry FROM IPMROUTE-STD-MIB
|
|
msdpPeerFsmEstablishedTransitions, msdpPeerState,
|
|
msdpPeerEntry, msdpSACacheEntry FROM MSDP-MIB
|
|
pethPsePortDetectionStatus, pethMainPseConsumptionPower FROM POWER-ETHERNET-MIB
|
|
tunnelInetConfigEntry FROM TUNNEL-MIB;
|
|
|
|
rapidCity MODULE-IDENTITY
|
|
LAST-UPDATED "201804200000Z" -- Apr 20, 2018
|
|
ORGANIZATION "Avaya"
|
|
CONTACT-INFO "Avaya
|
|
4655 Great America Parkway
|
|
Santa Clara, CA 95052-8185"
|
|
|
|
DESCRIPTION "Enterprise MIB for the Accelar product family."
|
|
|
|
REVISION "201804200000Z" -- Apr 20, 2018
|
|
DESCRIPTION "NOTE: This is an unofficial merge of VSP9K 4.1.0.0,
|
|
VOSS 5.0.0.0, 8800 7.2.21.0, ERS 4K 5.9.2, and
|
|
ERS 5K 7.0.1 variants"
|
|
::= { enterprises 2272 }
|
|
|
|
--
|
|
-- Local defines to avoid having to pull-in other RFC's.
|
|
--
|
|
BridgeId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "An identifier that identifies the Bridge Id"
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
|
|
Timeout ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "An identifier that identifies the timeout value."
|
|
SYNTAX Integer32
|
|
|
|
|
|
EnableValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable value."
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
|
|
RcLongDisplayString ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The semantics are identical to the standard DisplayString
|
|
in RFC1213 and RFC2579, except for the longer length that
|
|
is allowed with this TC. "
|
|
SYNTAX OCTET STRING (SIZE(0..65535))
|
|
--
|
|
-- This variable type is used through out the Rapid-City enterprise
|
|
-- MIB to denote the standard ifIndex in mib-2.
|
|
--
|
|
InterfaceIndex ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Port IfIndex."
|
|
SYNTAX Integer32 (0..2147483647)
|
|
|
|
InterfaceIndexOrZero ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention is an extension of the
|
|
InterfaceIndex convention. The latter defines a greater
|
|
than zero value used to identify an interface or interface
|
|
sub-layer in the managed system. This extension permits the
|
|
additional value of zero. the value zero is object-specific
|
|
and must therefore be defined as part of the description of
|
|
any object which uses this syntax. Examples of the usage of
|
|
zero might include situations where interface was unknown,
|
|
or when none or all interfaces need to be referenced."
|
|
SYNTAX Integer32 (0..2147483647)
|
|
|
|
|
|
--
|
|
-- The string is 88 octets long, for a total of 704 bits. Each bit
|
|
-- corresponds to a port, as represented by its ifIndex value . When a
|
|
-- bit has the value one(1), the corresponding port is a member of the
|
|
-- set. When a bit has the value zero(0), the corresponding port is not
|
|
-- a member of the set. The encoding is such that the most significant
|
|
-- bit of octet #1 corresponds to ifIndex 0, while the least significant
|
|
-- bit of octet #88 corresponds to ifIndex 703."
|
|
--
|
|
|
|
PortSet ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string is 88 octets long, for a total of 704 bits. Each bit
|
|
corresponds to a port, as represented by its ifIndex value . When a
|
|
bit has the value one(1), the corresponding port is a member of the
|
|
set. When a bit has the value zero(0), the corresponding port is not
|
|
a member of the set. The encoding is such that the most significant
|
|
bit of octet #1 corresponds to ifIndex 0, while the least significant
|
|
bit of octet #88 corresponds to ifIndex 703. In order to accommodate
|
|
future uses of this the string has a max size of 255 bytes."
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
|
|
|
|
IdList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "An identifier for a list of Ids."
|
|
SYNTAX OCTET STRING
|
|
|
|
VrfIdentifier ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual Router Identifier.
|
|
VRFID 0 is reserved for the Administrative VRF
|
|
and cannot be used to create VRF's.
|
|
"
|
|
SYNTAX Unsigned32 (0..512)
|
|
|
|
Ipv6NextHdr ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The ipv6 next header to look for."
|
|
SYNTAX INTEGER {
|
|
hop-by-hop(0), -- hop-by-hop
|
|
icmpv4(1), -- icmpv4
|
|
igmpv4(2), -- igmpv4
|
|
ipInIp(4), -- ip in ip encapsulation
|
|
tcp(6), -- tcp
|
|
egp(8), -- egp
|
|
udp(17), -- udp
|
|
ipv6(41), -- ipv6
|
|
routing(43), -- routing extension hdr
|
|
frag(44), -- fragmentation extension hdr
|
|
rsvp(46), -- rsvp
|
|
ipsecESP(50), -- ipsecESP
|
|
ipsecAh(51), -- ipsecAh
|
|
icmpv6(58), -- icmpv6
|
|
noNxtHdr(59), -- not next hdr
|
|
destOptions(60), -- destination options extension hdr
|
|
undefined(255) -- not provisioned
|
|
}
|
|
|
|
KhiStatusValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Key Health Indication status defintion
|
|
green(1): normal status.
|
|
yellow(2): Alert.
|
|
red(3): critical state.
|
|
adminDisable(4): administately disable.
|
|
notApplicable(5): either not config or not applicable"
|
|
SYNTAX INTEGER {
|
|
green(1),
|
|
yellow(2),
|
|
red(3),
|
|
adminDisable(4),
|
|
notApplicable(5)
|
|
}
|
|
|
|
LPortSet ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string is 256 octets long, for a total of 2048 bits. Each bit
|
|
corresponds to a logical port (for example, WLAN tunnel).
|
|
When a bit has the value one(1), the corresponding port is a member
|
|
of the set. When a bit has the value zero(0), the corresponding
|
|
logical port (for example, WLAN tunnel) is not a member of the set.
|
|
The encoding is such that the most significant bit of octet #1
|
|
corresponds to tPort 704, while the least significant bit of octet
|
|
#256 corresponds to tPort 2752. "
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
|
|
RcVlanIdOrNone ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range of VLAN IDs supported for application"
|
|
SYNTAX Integer32 (1..4094)
|
|
|
|
MplsLsrId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique identifier for an MPLS LSR. This MAY
|
|
represent an IpV4 address."
|
|
-- SYNTAX Unsigned32
|
|
SYNTAX IpAddress
|
|
|
|
CfmNameString ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CFM Name String"
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
|
|
RcVlanMask ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each VLAN ID is stored as a bit in a mask.
|
|
The most-significant (left-most) bit
|
|
represents Vlan ID 1."
|
|
SYNTAX OCTET STRING (SIZE (0..512))
|
|
|
|
IpIsisPlsbNodeNickName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Plsb Node Nick name."
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
|
|
--
|
|
-- Additions to resolve some SNMP V2 dependencies so we don't
|
|
-- have to pull-in a lot of mib modules.
|
|
--
|
|
internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 }
|
|
snmpV2 OBJECT IDENTIFIER ::= { internet 6 }
|
|
snmpModules OBJECT IDENTIFIER ::= { snmpV2 3 }
|
|
snmpMIB OBJECT IDENTIFIER ::= { snmpModules 1 }
|
|
snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 }
|
|
snmpTraps OBJECT IDENTIFIER ::= { snmpMIBObjects 5 }
|
|
|
|
--
|
|
-- Enterprise specific MIB groups
|
|
--
|
|
rcMgmt OBJECT IDENTIFIER ::= { rapidCity 1 }
|
|
rcA1100 OBJECT IDENTIFIER ::= { rapidCity 2 }
|
|
rcA1250 OBJECT IDENTIFIER ::= { rapidCity 6 }
|
|
rcA1150 OBJECT IDENTIFIER ::= { rapidCity 7 }
|
|
rcA1200 OBJECT IDENTIFIER ::= { rapidCity 8 }
|
|
rcA1050 OBJECT IDENTIFIER ::= { rapidCity 9 }
|
|
rcA740 OBJECT IDENTIFIER ::= { rapidCity 20 }
|
|
rcA750 OBJECT IDENTIFIER ::= { rapidCity 21 }
|
|
rcA790 OBJECT IDENTIFIER ::= { rapidCity 22 }
|
|
rcA750S OBJECT IDENTIFIER ::= { rapidCity 23 }
|
|
rcA8003 OBJECT IDENTIFIER ::= { rapidCity 280887555 }
|
|
rcA8006 OBJECT IDENTIFIER ::= { rapidCity 280887558 }
|
|
rcA8010 OBJECT IDENTIFIER ::= { rapidCity 280887562 }
|
|
rcA8010co OBJECT IDENTIFIER ::= { rapidCity 1623064842 }
|
|
rcA8610 OBJECT IDENTIFIER ::= { rapidCity 30 }
|
|
rcA8606 OBJECT IDENTIFIER ::= { rapidCity 31 }
|
|
rcA8110 OBJECT IDENTIFIER ::= { rapidCity 32 }
|
|
rcA8106 OBJECT IDENTIFIER ::= { rapidCity 33 }
|
|
rcA8603 OBJECT IDENTIFIER ::= { rapidCity 34 }
|
|
rcA8103 OBJECT IDENTIFIER ::= { rapidCity 35 }
|
|
rcA8110co OBJECT IDENTIFIER ::= { rapidCity 36 }
|
|
rcA8610co OBJECT IDENTIFIER ::= { rapidCity 37 }
|
|
-- This is a place holder for OM 2.0 chassises
|
|
-- NOTE that { rapidCity 40 } is also used for the rcBayStack branch,
|
|
-- and so we must be sure that nothing ever gets defined under rcAom8003
|
|
-- in order to avoid any conflicts.
|
|
--rcAom8010 OBJECT IDENTIFIER ::= { rapidCity 38 }
|
|
--rcAom8010co OBJECT IDENTIFIER ::= { rapidCity 39 }
|
|
rcBayStack OBJECT IDENTIFIER ::= { rapidCity 40 }
|
|
--rcAom8006 OBJECT IDENTIFIER ::= { rapidCity 41 }
|
|
rcA1424 OBJECT IDENTIFIER ::= { rapidCity 42 }
|
|
rcA1648 OBJECT IDENTIFIER ::= { rapidCity 43 }
|
|
rcA1612 OBJECT IDENTIFIER ::= { rapidCity 44 }
|
|
rcA1624 OBJECT IDENTIFIER ::= { rapidCity 45 }
|
|
rcRBS2402 OBJECT IDENTIFIER ::= { rapidCity 46 }
|
|
rcAtr8310 OBJECT IDENTIFIER ::= { rapidCity 47 }
|
|
rcAtr8306 OBJECT IDENTIFIER ::= { rapidCity 48 }
|
|
rcAtr8010 OBJECT IDENTIFIER ::= { rapidCity 49 }
|
|
rcAtr8006 OBJECT IDENTIFIER ::= { rapidCity 50 }
|
|
rcEsu1850 OBJECT IDENTIFIER ::= { rapidCity 51 }
|
|
rcEsu1850dc OBJECT IDENTIFIER ::= { rapidCity 52 }
|
|
rcEsu1800dc OBJECT IDENTIFIER ::= { rapidCity 53 }
|
|
rcA8611co OBJECT IDENTIFIER ::= { rapidCity 54 }
|
|
rcA8603r OBJECT IDENTIFIER ::= { rapidCity 55 }
|
|
rcERS8603r OBJECT IDENTIFIER ::= { rapidCity 56 }
|
|
rcA8803r OBJECT IDENTIFIER ::= { rapidCity 57 }
|
|
rcA8806 OBJECT IDENTIFIER ::= { rapidCity 58 }
|
|
rcA8810 OBJECT IDENTIFIER ::= { rapidCity 59 }
|
|
rcA8810co OBJECT IDENTIFIER ::= { rapidCity 60 }
|
|
|
|
-- From rapidCity 100 to rapidCity 200 is reserved for OM chassises
|
|
rcVSP9012 OBJECT IDENTIFIER ::= { rapidCity 201 }
|
|
rcVSP4850GTS OBJECT IDENTIFIER ::= { rapidCity 202 }
|
|
rcVSP4850GTSPWRPLUS OBJECT IDENTIFIER ::= { rapidCity 203 }
|
|
rcVSP9010 OBJECT IDENTIFIER ::= { rapidCity 204 }
|
|
rcVSP8284XSQ OBJECT IDENTIFIER ::= { rapidCity 205 }
|
|
rcVSP4450GSXPWRPLUS OBJECT IDENTIFIER ::= { rapidCity 206 }
|
|
rcVSP4450GTXHTPWRPLUS OBJECT IDENTIFIER ::= { rapidCity 207 }
|
|
rcVSP8404 OBJECT IDENTIFIER ::= { rapidCity 208 }
|
|
rcVSP7254XSQ OBJECT IDENTIFIER ::= { rapidCity 209 }
|
|
rcVSP7254XTQ OBJECT IDENTIFIER ::= { rapidCity 210 }
|
|
rcVSP4450GSX OBJECT IDENTIFIER ::= { rapidCity 211 }
|
|
rcVSP8608 OBJECT IDENTIFIER ::= { rapidCity 212 }
|
|
-- APLS device start
|
|
rcDSG8032 OBJECT IDENTIFIER ::= { rapidCity 213 }
|
|
rcDSG6248CFP OBJECT IDENTIFIER ::= { rapidCity 214 }
|
|
rcDSG7648 OBJECT IDENTIFIER ::= { rapidCity 215 }
|
|
rcDSG7648C OBJECT IDENTIFIER ::= { rapidCity 216 }
|
|
rcDSG7480 OBJECT IDENTIFIER ::= { rapidCity 217 }
|
|
rcDSG6248 OBJECT IDENTIFIER ::= { rapidCity 218 }
|
|
rcDSG6248P OBJECT IDENTIFIER ::= { rapidCity 219 }
|
|
rcVSP8404C OBJECT IDENTIFIER ::= { rapidCity 220 }
|
|
rcDSG9032 OBJECT IDENTIFIER ::= { rapidCity 221 }
|
|
rcDSG8064 OBJECT IDENTIFIER ::= { rapidCity 222 }
|
|
rcVSP5030GSXuPWR OBJECT IDENTIFIER ::= { rapidCity 223 }
|
|
rcVSP5054GSXuPWR OBJECT IDENTIFIER ::= { rapidCity 224 }
|
|
---VSP1100 VAAS
|
|
rcVSP1100 OBJECT IDENTIFIER ::= { rapidCity 227 }
|
|
-- No longer use Rappid city System OID.
|
|
-- Need to define and use Extreme sys OID
|
|
--
|
|
-- MIB groups. Note that the ones that are commented out are now defined in
|
|
-- separate MIB files. These are kept as placeholders here.
|
|
--
|
|
rcSystem OBJECT IDENTIFIER ::= { rcMgmt 1 }
|
|
rcTftp OBJECT IDENTIFIER ::= { rcMgmt 2 }
|
|
rcVlan OBJECT IDENTIFIER ::= { rcMgmt 3 }
|
|
rcChassis OBJECT IDENTIFIER ::= { rcMgmt 4 }
|
|
rcMirror OBJECT IDENTIFIER ::= { rcMgmt 5 }
|
|
rcDipSwitch OBJECT IDENTIFIER ::= { rcMgmt 6 }
|
|
rcTblSize OBJECT IDENTIFIER ::= { rcMgmt 7 }
|
|
rcIp OBJECT IDENTIFIER ::= { rcMgmt 8 }
|
|
rcArp OBJECT IDENTIFIER ::= { rcMgmt 9 }
|
|
rcRip OBJECT IDENTIFIER ::= { rcMgmt 10 }
|
|
rcTest OBJECT IDENTIFIER ::= { rcMgmt 11 }
|
|
rcStat OBJECT IDENTIFIER ::= { rcMgmt 12 }
|
|
rcStg OBJECT IDENTIFIER ::= { rcMgmt 13 }
|
|
rcBridge OBJECT IDENTIFIER ::= { rcMgmt 14 }
|
|
rcBoot OBJECT IDENTIFIER ::= { rcMgmt 15 }
|
|
rcDevice OBJECT IDENTIFIER ::= { rcMgmt 16 }
|
|
rcMlt OBJECT IDENTIFIER ::= { rcMgmt 17 }
|
|
rcWeb OBJECT IDENTIFIER ::= { rcMgmt 18 }
|
|
rcCli OBJECT IDENTIFIER ::= { rcMgmt 19 }
|
|
rcError OBJECT IDENTIFIER ::= { rcMgmt 20 }
|
|
rcTraps OBJECT IDENTIFIER ::= { rcMgmt 21 }
|
|
rcSyslog OBJECT IDENTIFIER ::= { rcMgmt 22 }
|
|
rcDiag OBJECT IDENTIFIER ::= { rcMgmt 23 }
|
|
rcIpx OBJECT IDENTIFIER ::= { rcMgmt 24 }
|
|
rcPos OBJECT IDENTIFIER ::= { rcMgmt 26 }
|
|
rcLinkFlapDetect OBJECT IDENTIFIER ::= { rcMgmt 27 }
|
|
rcV1Traps OBJECT IDENTIFIER ::= { rcMgmt 28 }
|
|
rcRadius OBJECT IDENTIFIER ::= { rcMgmt 29 }
|
|
rcIgmp OBJECT IDENTIFIER ::= { rcMgmt 30 }
|
|
rcUserSetTime OBJECT IDENTIFIER ::= { rcMgmt 31 }
|
|
rcL2Redundancy OBJECT IDENTIFIER ::= { rcMgmt 32 }
|
|
rcNtp OBJECT IDENTIFIER ::= { rcMgmt 33 }
|
|
rcSsh OBJECT IDENTIFIER ::= { rcMgmt 34 }
|
|
rcSvlan OBJECT IDENTIFIER ::= { rcMgmt 35 }
|
|
-- This is a place holder reminder reserved for OM 2.0
|
|
rcOpm OBJECT IDENTIFIER ::= { rcMgmt 36 }
|
|
rcVpn OBJECT IDENTIFIER ::= { rcMgmt 37 }
|
|
rcOeAdm OBJECT IDENTIFIER ::= { rcMgmt 38 }
|
|
rcTlsVpn OBJECT IDENTIFIER ::= { rcMgmt 39 }
|
|
rcTls OBJECT IDENTIFIER ::= { rcMgmt 40 }
|
|
rcCos OBJECT IDENTIFIER ::= { rcMgmt 41 }
|
|
rcBanRing OBJECT IDENTIFIER ::= { rcMgmt 42 }
|
|
rcRing OBJECT IDENTIFIER ::= { rcMgmt 43 }
|
|
--rcMmrp OBJECT IDENTIFIER ::= { rcMgmt 44 }
|
|
rcTengEnet OBJECT IDENTIFIER ::= { rcMgmt 50 }
|
|
rcRec OBJECT IDENTIFIER ::= { rcMgmt 51 }
|
|
rcTdc OBJECT IDENTIFIER ::= { rcMgmt 52 }
|
|
rcLacp OBJECT IDENTIFIER ::= { rcMgmt 53 }
|
|
--rcQos OBJECT IDENTIFIER ::= { rcMgmt 54 }
|
|
--rcFilter OBJECT IDENTIFIER ::= { rcMgmt 55 }
|
|
rcLicense OBJECT IDENTIFIER ::= { rcMgmt 56 }
|
|
rcEap OBJECT IDENTIFIER ::= { rcMgmt 57 }
|
|
rcMcast OBJECT IDENTIFIER ::= { rcMgmt 58 }
|
|
rcOspf OBJECT IDENTIFIER ::= { rcMgmt 59 }
|
|
rcFdb OBJECT IDENTIFIER ::= { rcMgmt 60 }
|
|
rcIgap OBJECT IDENTIFIER ::= { rcMgmt 61 }
|
|
rcIpv6 OBJECT IDENTIFIER ::= { rcMgmt 62 }
|
|
rcIsis OBJECT IDENTIFIER ::= { rcMgmt 63 }
|
|
rcSlpp OBJECT IDENTIFIER ::= { rcMgmt 64 }
|
|
rcTacacs OBJECT IDENTIFIER ::= { rcMgmt 65 }
|
|
rcIpfix OBJECT IDENTIFIER ::= { rcMgmt 66 }
|
|
rcOspfv3 OBJECT IDENTIFIER ::= { rcMgmt 67 }
|
|
rcFlowClassifier OBJECT IDENTIFIER ::= { rcMgmt 68 }
|
|
rcCfm OBJECT IDENTIFIER ::= { rcMgmt 69 }
|
|
rcPwe3 OBJECT IDENTIFIER ::= { rcMgmt 70 }
|
|
rcPlugOptMod OBJECT IDENTIFIER ::= { rcMgmt 71 }
|
|
rc8021ah OBJECT IDENTIFIER ::= { rcMgmt 72 }
|
|
rcVrrp OBJECT IDENTIFIER ::= { rcMgmt 73 }
|
|
rcMpls OBJECT IDENTIFIER ::= { rcMgmt 74 }
|
|
rcPim OBJECT IDENTIFIER ::= { rcMgmt 75 }
|
|
rcIpMRoute OBJECT IDENTIFIER ::= { rcMgmt 76 }
|
|
rcCsu OBJECT IDENTIFIER ::= { rcMgmt 77 }
|
|
rcPlsb OBJECT IDENTIFIER ::= { rcMgmt 78 }
|
|
rcCoreDump OBJECT IDENTIFIER ::= { rcMgmt 79 }
|
|
rcMsdp OBJECT IDENTIFIER ::= { rcMgmt 80 }
|
|
rcBfd OBJECT IDENTIFIER ::= { rcMgmt 81 }
|
|
rcLinkOam OBJECT IDENTIFIER ::= { rcMgmt 82 }
|
|
rcAccessMstp OBJECT IDENTIFIER ::= { rcMgmt 83 }
|
|
rcDhu OBJECT IDENTIFIER ::= { rcMgmt 84 }
|
|
rcKhi OBJECT IDENTIFIER ::= { rcMgmt 85 }
|
|
rcIke OBJECT IDENTIFIER ::= { rcMgmt 86 }
|
|
rcIsid OBJECT IDENTIFIER ::= { rcMgmt 87 }
|
|
rcMACSec OBJECT IDENTIFIER ::= { rcMgmt 88 }
|
|
rc2k OBJECT IDENTIFIER ::= { rcMgmt 100 }
|
|
rcVossSystem OBJECT IDENTIFIER ::= { rcMgmt 101 }
|
|
rcCliSystem OBJECT IDENTIFIER ::= { rcMgmt 102 }
|
|
rcSmtp OBJECT IDENTIFIER ::= { rcMgmt 103 }
|
|
rcOm8k OBJECT IDENTIFIER ::= { rcMgmt 200 }
|
|
cobra OBJECT IDENTIFIER ::= { rcMgmt 201 }
|
|
rcPowerRanger OBJECT IDENTIFIER ::= { rcMgmt 202 }
|
|
rcVrf OBJECT IDENTIFIER ::= { rcMgmt 203 }
|
|
rcCobaltBlue OBJECT IDENTIFIER ::= { rcMgmt 204 }
|
|
rcOlc OBJECT IDENTIFIER ::= { rcMgmt 205 }
|
|
rcVrrpv3 OBJECT IDENTIFIER ::= { rcMgmt 206 }
|
|
rcWlan OBJECT IDENTIFIER ::= { rcMgmt 207 }
|
|
rcVspTalk OBJECT IDENTIFIER ::= { rcMgmt 208 }
|
|
rcSlaMon OBJECT IDENTIFIER ::= { rcMgmt 209 }
|
|
rcLldp OBJECT IDENTIFIER ::= { rcMgmt 210 }
|
|
rcVirtualIst OBJECT IDENTIFIER ::= { rcMgmt 211 }
|
|
rcSingleCpSystem OBJECT IDENTIFIER ::= { rcMgmt 212 }
|
|
rcIpsec OBJECT IDENTIFIER ::= { rcMgmt 213 }
|
|
rcASG OBJECT IDENTIFIER ::= { rcMgmt 214 }
|
|
rcMld OBJECT IDENTIFIER ::= { rcMgmt 215 }
|
|
rcMRouteIpv6 OBJECT IDENTIFIER ::= { rcMgmt 216 }
|
|
rcPimIpv6 OBJECT IDENTIFIER ::= { rcMgmt 217 }
|
|
rcVxlan OBJECT IDENTIFIER ::= { rcMgmt 218 }
|
|
rcDvr OBJECT IDENTIFIER ::= { rcMgmt 219 }
|
|
rcLldpExt OBJECT IDENTIFIER ::= { rcMgmt 220 }
|
|
rcSflow OBJECT IDENTIFIER ::= { rcMgmt 221 }
|
|
|
|
rcDigitalCert OBJECT IDENTIFIER ::= { rcMgmt 222 }
|
|
rcNls OBJECT IDENTIFIER ::= { rcMgmt 223 }
|
|
rcCarrier OBJECT IDENTIFIER ::= { rcMgmt 224 }
|
|
rcOvsdb OBJECT IDENTIFIER ::= { rcMgmt 225 }
|
|
rcAppTelemetry OBJECT IDENTIFIER ::= { rcMgmt 226 }
|
|
rcRestConf OBJECT IDENTIFIER ::= { rcMgmt 227 }
|
|
rcEndpointTracking OBJECT IDENTIFIER ::= { rcMgmt 228 }
|
|
lem OBJECT IDENTIFIER ::= { rcMgmt 229 }
|
|
rcCloudIq OBJECT IDENTIFIER ::= { rcMgmt 230 }
|
|
|
|
-- LOGICAL (System) Elements
|
|
|
|
rcSysIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This entity's IP address."
|
|
::= { rcSystem 1 }
|
|
|
|
rcSysNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This entity's subnet mask."
|
|
::= { rcSystem 2 }
|
|
|
|
rcSysBroadcast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This entity's broadcast address."
|
|
::= { rcSystem 3 }
|
|
|
|
-- Community Strings
|
|
|
|
rcSysCommReadWriteAll OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When an SNMP message is received by this entity, the
|
|
community string in the message is compared with this
|
|
string first. If it matches, read-write access is
|
|
granted to all items in the MIB. If it doesn't
|
|
match, the rcSysCommReadWrite string is compared next."
|
|
::= { rcSystem 4 }
|
|
|
|
rcSysCommReadWrite OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When an SNMP message is received by this entity, the
|
|
community string in the message is compared with this
|
|
string second. If it matches, read-write access is
|
|
granted to all items in the MIB except community
|
|
strings. (Community strings appear empty when read
|
|
and return a no such name error when an attempt is
|
|
made to write them.) If it doesn't match, the
|
|
rcSysCommReadWriteLayer3 string is compared next."
|
|
::= { rcSystem 5 }
|
|
|
|
rcSysCommReadOnly OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When an SNMP message is received by this entity, the
|
|
community string in the message is compared with this
|
|
string third. If it matches, read-only access is
|
|
granted to all items in the MIB except community
|
|
strings. (Community strings appear empty when read.)
|
|
If it doesn't match, no access is granted, no
|
|
response is sent back to the SNMP requester, and
|
|
SNMP traps are sent to the SNMP trap receiver(s) if
|
|
configured."
|
|
::= { rcSystem 6 }
|
|
|
|
-- Other
|
|
|
|
rcSysVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Software version running on device"
|
|
::= { rcSystem 7 }
|
|
|
|
rcSysAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
hardReset(2), -- power on tests
|
|
softReset(3), -- reset w/o power on tests
|
|
saveToNVRAM(4), -- save current config to NVRAM
|
|
resetCounters(5), -- reset all statistic counters
|
|
saveToStandbyNVRAM(6), -- save config to slave NVRAM
|
|
cpuSwitchOver(7), -- CPU board switch-over
|
|
checkSwInFlash(8),
|
|
checkSwInPcmcia(9),
|
|
resetConsole(10),
|
|
resetModem(11),
|
|
flushIpRouteTbl(12),
|
|
saveRuntimeConfig(13), -- 8k only
|
|
saveRuntimeConfigToSlave(14), -- 8k only
|
|
saveBootConfig(15), -- 8k only
|
|
saveSlaveBootConfig(16), -- 8k only
|
|
resetIstStatCounters(17),
|
|
-- being used in rel2.2(18)
|
|
-- being used in rel2.2(19)
|
|
-- reserve(20)
|
|
-- reserve(21)
|
|
resetEsmPortStats(22),
|
|
setCsuAuto(23)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Initiate a system action."
|
|
DEFVAL { none }
|
|
::= { rcSystem 8 }
|
|
|
|
rcSysResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
inProgress(2), -- in progress
|
|
success(3), -- success
|
|
fail(4), -- failure
|
|
flashReadFailed(5), -- could not read from flash
|
|
pcmciaReadFailed(6), -- could not read from pcmcia
|
|
crcCheckFailed(7),
|
|
noStandbyCpu(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Result from the last system action."
|
|
DEFVAL { none }
|
|
::= { rcSystem 9 }
|
|
|
|
rcSysLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Last management initiated configuration
|
|
change since sysUpTime."
|
|
::= { rcSystem 10 }
|
|
|
|
rcSysLastVlanChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Last management initiated VLAN configuration
|
|
change since sysUpTime."
|
|
::= { rcSystem 11 }
|
|
|
|
rcSysLastStatisticsReset OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Last management initiated statistics reset
|
|
since sysUpTime."
|
|
::= { rcSystem 12 }
|
|
|
|
-- Global Statistics
|
|
|
|
rcSysBufferUtil OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Buffer utilization as a percentage of the
|
|
total amount of buffer space in the system.
|
|
A high value indicates congestion."
|
|
::= { rcSystem 13 }
|
|
|
|
rcSysBufferUtilPeak OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The largest buffer utilization since sysUpTime"
|
|
::= { rcSystem 14 }
|
|
|
|
rcSysBufferUtilPeakTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for rcSysPeakBandwidth"
|
|
::= { rcSystem 15 }
|
|
|
|
rcSysNVRamSize OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Non-volatile RAM in Kbytes"
|
|
::= { rcSystem 16 }
|
|
|
|
rcSysNVRamUsed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Non-volatile RAM in use in Kbytes"
|
|
::= { rcSystem 17 }
|
|
|
|
rcSysLastSaveToNVRam OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SysUpTime of the last time when NVRAM was
|
|
written to. This could be a save of the system
|
|
configuration or via a file transfer of a
|
|
configuration file."
|
|
::= { rcSystem 18 }
|
|
|
|
rcSysLastSaveToStandbyNVRam OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SysUpTime of the last time when the standby NVRAM
|
|
(on the back-up CPU board) was written to."
|
|
::= { rcSystem 19 }
|
|
|
|
rcSysCpuUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Percentage of CPU utilization.
|
|
This object is not supported on VSP. VSP uses
|
|
rcKhiSlotCpuCurrentUtil"
|
|
::= { rcSystem 20 }
|
|
|
|
rcSysSwitchFabricUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Percentage of Switching Fabric utilization. Object
|
|
is not support on VSP"
|
|
::= { rcSystem 21 }
|
|
|
|
rcSysRmonMemSize OBJECT-TYPE
|
|
SYNTAX Integer32 (250000..4000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Amount of RAM in bytes to allocate for RMON
|
|
to use when rcSysRmonEnable is TRUE."
|
|
::= { rcSystem 22 }
|
|
|
|
rcSysRmonEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Control whether the RMON feature should be
|
|
enabled.
|
|
|
|
To enable the RMON feature, set this variable to
|
|
true. The RMON agent in the device will get
|
|
started immediately if the amount of memory
|
|
specified by rcSysRmonMemSize is currently
|
|
available in the device.
|
|
|
|
To disable the RMON feature, set this variable to
|
|
false, save the new setting to NVRAM, and reboot
|
|
the device. After the device is rebooted the
|
|
RMON agent will not be operational."
|
|
::= { rcSystem 23 }
|
|
|
|
rcSysRmonSaveConfig OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Control whether RMON configuration information
|
|
should be saved to NVRAM so RMON settings can
|
|
be automatically reinstalled after a system
|
|
reboot.
|
|
|
|
Setting rcSysRmonSaveConfig to true does not
|
|
immediately save the configuration information.
|
|
The save happens when the rcSysAction variable
|
|
is set to 'saveToNVRAM(4)'.
|
|
|
|
This option is only meaningful when the
|
|
rcSysRmonEnable variable is set to true."
|
|
::= { rcSystem 24 }
|
|
|
|
rcSysRmonTrapOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
toOwner(1),
|
|
toAll(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether RMON traps should be
|
|
sent to only the owner of the RMON alarm (i.e.,
|
|
the manager that created the alarm entry) or
|
|
all trap recipients in the system trap receiver
|
|
table."
|
|
DEFVAL { toOwner }
|
|
::= { rcSystem 25 }
|
|
|
|
rcSysSupportRouting OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether routing is supported
|
|
in this product."
|
|
::= { rcSystem 26 }
|
|
|
|
rcSysSupportWebServer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether WebServer is supported
|
|
in this product."
|
|
::= { rcSystem 27 }
|
|
|
|
rcSysLastIpAddrChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Last management initiated IP address change
|
|
since sysUpTime. Any addition or deletion of
|
|
an IP address to a single routable port or
|
|
a VLAN is time-stamped by this variable."
|
|
::= { rcSystem 28 }
|
|
|
|
rcSysCommReadWriteLayer3 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When an SNMP message is received by this entity, the
|
|
community string in the message is compared with this
|
|
string third. If it matches, read-write access is
|
|
granted to all Layer-3 items in the MIB except community
|
|
strings. (Community strings appear empty when read
|
|
and return a no such name error when an attempt is
|
|
made to write them.) If it doesn't match, the
|
|
rcSysCommReadWriteLayer2 string is compared next."
|
|
::= { rcSystem 29 }
|
|
|
|
rcSysCommReadWriteLayer2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When an SNMP message is received by this entity, the
|
|
community string in the message is compared with this
|
|
string fourth. If it matches, read-write access is
|
|
granted to all Layer-2 items in the MIB except community
|
|
strings. (Community strings appear empty when read
|
|
and return a no such name error when an attempt is
|
|
made to write them.) If it doesn't match, the
|
|
rcSysCommReadOnly string is compared next."
|
|
::= { rcSystem 30 }
|
|
|
|
rcSysAccessPolicyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the system access policy feature.
|
|
if 'true', the rcSysAccessPolicyTable is examined to
|
|
determine which packets should be allowed or denied
|
|
access to this device."
|
|
DEFVAL { false }
|
|
::= { rcSystem 31 }
|
|
|
|
rcSysDefaultRuntimeConfigFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "default config."
|
|
::= { rcSystem 32 }
|
|
|
|
rcSysDefaultBootConfigFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "default boot config."
|
|
::= { rcSystem 33 }
|
|
|
|
rcSysConfigFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "File name used in conjunction with rcSysAction.
|
|
|
|
If rcSysAction is set to 'saveRuntimeConfig' or
|
|
'saveRuntimeConfigToSlave' then this file name
|
|
will be used instead of the file name specified
|
|
in rcSysDefaultRuntimeConfigFileName.
|
|
|
|
If rcSysAction is set to 'saveBootConfig' or
|
|
'saveBootConfigToSlave' then this file name will
|
|
be used insteaad of the file name specified in
|
|
rcSysDefaultBootConfigFileName.
|
|
|
|
If the file name is blank (i.e., nothing is
|
|
entered) then the default file name will be
|
|
used."
|
|
::= { rcSystem 34 }
|
|
|
|
rcSysLastRunTimeConfigSave OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SysUpTime of the last time when the run time
|
|
configuration was written to."
|
|
::= { rcSystem 35 }
|
|
|
|
rcSysLastRunTimeConfigSaveToSlave OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SysUpTime of the last time when the run time
|
|
configuration was written to slave NVRAM."
|
|
::= { rcSystem 36 }
|
|
|
|
rcSysLastBootConfigSave OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SysUpTime of the last time when the boot
|
|
configuration was written to."
|
|
::= { rcSystem 37 }
|
|
|
|
rcSysLastBootConfigSaveOnSlave OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SysUpTime of the last time when the boot
|
|
configuration was written on the slave NVRAM."
|
|
::= { rcSystem 38 }
|
|
|
|
rcSysRmonUtilizationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
halfDuplex(1),
|
|
fullDuplex(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to control whether RMON should use a half-duplex
|
|
or full-duplex formula to calculate port utilization.
|
|
When set to 'halfDuplex', RMON will use InOctets and
|
|
the port's speed to calculate port utilization (this
|
|
is the standard RMON rfc1271 convention).
|
|
When set to 'fullDuplex', RMON will use InOctets and
|
|
OutOctets and 2X the port's speed to calculate port
|
|
utilization. Furthermore, if this variable is set to
|
|
'fullDuplex', but the port is operating in a
|
|
half-duplex mode, the calculation defaults back to
|
|
the rfc1271 convention."
|
|
DEFVAL { halfDuplex }
|
|
::= { rcSystem 39 }
|
|
|
|
rcSysCommReadWriteLayer1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "read-write L1 access"
|
|
::= { rcSystem 40 }
|
|
|
|
rcSysOtherBufferUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bw currently consumed"
|
|
::= { rcSystem 41 }
|
|
|
|
rcSysOtherBufferUtilPeak OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "peak bw since reset"
|
|
::= { rcSystem 42 }
|
|
|
|
rcSysOtherBufferUtilPeakTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "timestamp for rcSysPeakBw"
|
|
::= { rcSystem 43 }
|
|
|
|
rcSysOtherCpuUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "% cpu utilization"
|
|
::= { rcSystem 44 }
|
|
|
|
rcSysOtherSwitchFabricUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "% switch fabric util"
|
|
::= { rcSystem 45 }
|
|
|
|
rcSysDramSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dram size in mega-bytes. It is not supported
|
|
on VSP"
|
|
::= { rcSystem 46 }
|
|
|
|
rcSysDramUsed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dram used in percentage. It is not supported
|
|
on VSP"
|
|
::= { rcSystem 47 }
|
|
|
|
rcSysDramFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dram free size in kilo-bytes. It is not supported
|
|
on VSP"
|
|
::= { rcSystem 48 }
|
|
|
|
rcSysDramMaxBlockFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dram max block free size in kilo-bytes. it is not
|
|
supported on VSP"
|
|
::= { rcSystem 49 }
|
|
|
|
rcSysVirtualIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Virtual IP is an IP address that owned and
|
|
advertised only by the master CPU. So whichever
|
|
CPU is master registers this IP address. Unlike the
|
|
management IP address, this address goes in the
|
|
switch config file and not the boot config"
|
|
::= { rcSystem 51 }
|
|
|
|
rcSysVirtualNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Net mask of the management virtual Ip address"
|
|
::= { rcSystem 52 }
|
|
|
|
rcSysReadWriteLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The status of the read/write level"
|
|
::= { rcSystem 53 }
|
|
|
|
rcSysMTUSize OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mtu1950(1),
|
|
mtu9600(2),
|
|
mtu1522(3),
|
|
mtu9022(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is the maximum transmission size of frames that all
|
|
the ports on the chassis support.
|
|
Note: MicroVSP (VSP1xxx) supports frame size 1950,1522,9022.
|
|
Other platforms support frame size 1950,1522,9600."
|
|
DEFVAL { mtu1950 }
|
|
::= { rcSystem 55 }
|
|
|
|
rcSysClockSyncTime OBJECT-TYPE
|
|
SYNTAX Integer32 (15..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval at which RTC and system clocks are
|
|
synchronized.Not supported in VSP 3.3"
|
|
DEFVAL { 60 }
|
|
::= { rcSystem 56 }
|
|
|
|
rcSysForceTrapSender OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is a flag that if user wants to configured
|
|
CLIP (Circuit Less IP) as trap originator."
|
|
::= { rcSystem 57 }
|
|
|
|
rcSysMrouteStrLimit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable or disable mroute stream limit in system."
|
|
DEFVAL { false }
|
|
::= { rcSystem 58 }
|
|
|
|
-- Trap Receiver Table
|
|
|
|
rcSysTrapRecvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSysTrapRecvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "The trap receiver table (0 to 25 entries). This
|
|
table lists the addresses of Network Management
|
|
Stations that should receive trap messages from
|
|
this entity when an exception condition occurs."
|
|
::= { rcSystem 60 }
|
|
|
|
rcSysTrapRecvEntry OBJECT-TYPE
|
|
SYNTAX RcSysTrapRecvEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "A trap receiver table entry."
|
|
INDEX { rcSysTrapRecvAddress }
|
|
::= { rcSysTrapRecvTable 1 }
|
|
|
|
RcSysTrapRecvEntry ::=
|
|
SEQUENCE {
|
|
rcSysTrapRecvAddress IpAddress,
|
|
rcSysTrapRecvVersion INTEGER,
|
|
rcSysTrapRecvCommunity DisplayString,
|
|
rcSysTrapRecvSrcAddress IpAddress,
|
|
rcSysTrapRecvRowStatus RowStatus
|
|
}
|
|
|
|
rcSysTrapRecvAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "IP address for trap receiver."
|
|
::= { rcSysTrapRecvEntry 1 }
|
|
|
|
rcSysTrapRecvVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v1(1),
|
|
v2c(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "The version of trap receiver."
|
|
DEFVAL { v1 }
|
|
::= { rcSysTrapRecvEntry 2 }
|
|
|
|
rcSysTrapRecvCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Community string used for trap messages to this
|
|
trap receiver."
|
|
::= { rcSysTrapRecvEntry 3 }
|
|
|
|
rcSysTrapRecvSrcAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Source IP address to use when sending traps.
|
|
This IP address will be inserted into the
|
|
source IP address field in the UDP trap packet."
|
|
::= { rcSysTrapRecvEntry 4 }
|
|
|
|
rcSysTrapRecvRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcSysTrapRecvEntry 5 }
|
|
|
|
|
|
-- Access Policy Table
|
|
|
|
rcSysAccessPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSysAccesspolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Management access policy table. This table is
|
|
used to permit or deny access to this device via
|
|
the specified source Id."
|
|
::= { rcSystem 61 }
|
|
|
|
rcSysAccessPolicyEntry OBJECT-TYPE
|
|
SYNTAX RcSysAccesspolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An access policy table entry."
|
|
INDEX { rcSysAccessPolicyId }
|
|
::= { rcSysAccessPolicyTable 1 }
|
|
|
|
RcSysAccesspolicyEntry ::=
|
|
SEQUENCE {
|
|
rcSysAccessPolicyId Integer32,
|
|
rcSysAccessPolicyName DisplayString,
|
|
rcSysAccessPolicyPolicyEnable TruthValue,
|
|
rcSysAccessPolicyMode INTEGER,
|
|
rcSysAccessPolicyService Integer32,
|
|
rcSysAccessPolicyPrecedence Integer32,
|
|
rcSysAccessPolicyNetAddr IpAddress,
|
|
rcSysAccessPolicyNetMask IpAddress,
|
|
rcSysAccessPolicyTrustedHostAddr IpAddress,
|
|
rcSysAccessPolicyTrustedHostUserName DisplayString,
|
|
rcSysAccessPolicyAccessLevel INTEGER,
|
|
rcSysAccessPolicyLog TruthValue,
|
|
rcSysAccessPolicyUsage Counter32,
|
|
rcSysAccessPolicyRowStatus RowStatus,
|
|
rcSysAccessPolicyAccessStrict TruthValue,
|
|
rcSysAccessPolicyNetInetAddrType INTEGER,
|
|
rcSysAccessPolicyNetInetAddress InetAddress,
|
|
rcSysAccessPolicyNetInetAddrPrefixLen InetAddressPrefixLength,
|
|
rcSysAccessPolicyTrustedHostInetAddress InetAddress
|
|
}
|
|
|
|
rcSysAccessPolicyId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Policy Id."
|
|
::= { rcSysAccessPolicyEntry 1 }
|
|
|
|
rcSysAccessPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of this policy."
|
|
::= { rcSysAccessPolicyEntry 2 }
|
|
|
|
rcSysAccessPolicyPolicyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether this policy is currently
|
|
active."
|
|
DEFVAL { true }
|
|
::= { rcSysAccessPolicyEntry 3 }
|
|
|
|
rcSysAccessPolicyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allow(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether a packet having a
|
|
source IP address that matches this entry
|
|
should be permitted to enter the device or
|
|
denied access."
|
|
DEFVAL { allow }
|
|
::= { rcSysAccessPolicyEntry 4 }
|
|
|
|
rcSysAccessPolicyService OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Is represented as bitset to indicate which protocol
|
|
this entry should be applied to.
|
|
Value is one of multiple(logical 'OR')
|
|
of the following values:
|
|
telnet(1): enables telnet service
|
|
snmp(2): enables snmp service
|
|
tftp(4): enables tftp service
|
|
ftp(8): enables ftp service
|
|
http(16): enables http service
|
|
rlogin(32): enables rlogin service
|
|
ssh(64): enables ssh service
|
|
snmp-v3(128): enables snmp service for v3 groups
|
|
Value 0 means no service enabled."
|
|
DEFVAL { 0 }
|
|
::= { rcSysAccessPolicyEntry 5 }
|
|
|
|
-- Following between =begin =end is processed by mib_tools/extras.awk
|
|
-- =begin enum
|
|
-- rcSysAccessPolicyService none 0
|
|
-- rcSysAccessPolicyService telnet 1
|
|
-- rcSysAccessPolicyService snmp 2
|
|
-- rcSysAccessPolicyService tftp 4
|
|
-- rcSysAccessPolicyService ftp 8
|
|
-- rcSysAccessPolicyService http 16
|
|
-- rcSysAccessPolicyService rlogin 32
|
|
-- rcSysAccessPolicyService ssh 64
|
|
-- rcSysAccessPolicyService snmp_v3 128
|
|
-- rcSysAccessPolicyService all 255
|
|
-- =end enum
|
|
|
|
rcSysAccessPolicyPrecedence OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the precedence of this policy.
|
|
The Lower the number the higher the precedence."
|
|
DEFVAL { 10 }
|
|
::= { rcSysAccessPolicyEntry 6 }
|
|
|
|
rcSysAccessPolicyNetAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source network IP address."
|
|
::= { rcSysAccessPolicyEntry 7 }
|
|
|
|
rcSysAccessPolicyNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source network mask."
|
|
::= { rcSysAccessPolicyEntry 8 }
|
|
|
|
rcSysAccessPolicyTrustedHostAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Trusted IP address of host performing a rlogin
|
|
into the device."
|
|
::= { rcSysAccessPolicyEntry 9 }
|
|
|
|
rcSysAccessPolicyTrustedHostUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name on the trusted host performing a rlogin
|
|
into the device."
|
|
::= { rcSysAccessPolicyEntry 10 }
|
|
|
|
rcSysAccessPolicyAccessLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readOnly(1),
|
|
readWrite(2),
|
|
readWriteAll(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Access level of trusted host."
|
|
DEFVAL { readOnly }
|
|
::= { rcSysAccessPolicyEntry 11 }
|
|
|
|
rcSysAccessPolicyLog OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether logging should be
|
|
performed if this policy was applied."
|
|
DEFVAL { false }
|
|
::= { rcSysAccessPolicyEntry 12 }
|
|
|
|
rcSysAccessPolicyUsage OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Usage Counter"
|
|
::= { rcSysAccessPolicyEntry 13 }
|
|
|
|
rcSysAccessPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete an entry"
|
|
::= { rcSysAccessPolicyEntry 14 }
|
|
|
|
rcSysAccessPolicyAccessStrict OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to restrict the access level specified in
|
|
the system access policy table to exactly the
|
|
same access level as specified by user. If TRUE
|
|
then only the access level in the policy table
|
|
is allowed access. If FALSE, then the default
|
|
behavior is to assume the access level specified
|
|
in policy table as the floor."
|
|
DEFVAL { false }
|
|
::= { rcSysAccessPolicyEntry 15 }
|
|
|
|
rcSysAccessPolicyNetInetAddrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
any(0),
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source network Inet Address Type."
|
|
::= { rcSysAccessPolicyEntry 16 }
|
|
|
|
rcSysAccessPolicyNetInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source network Inet Address (prefix/network)."
|
|
::= { rcSysAccessPolicyEntry 17 }
|
|
|
|
rcSysAccessPolicyNetInetAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source network Inet Address Prefix-Length/Mask."
|
|
::= { rcSysAccessPolicyEntry 18 }
|
|
|
|
rcSysAccessPolicyTrustedHostInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Trusted Inet address of host performing a rlogin
|
|
into the device."
|
|
::= { rcSysAccessPolicyEntry 19 }
|
|
|
|
|
|
rcSysAccPolSnmpGrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSysAccPolSnmpGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SNMP group list for access policy"
|
|
::= { rcSystem 95 }
|
|
|
|
rcSysAccPolSnmpGrpEntry OBJECT-TYPE
|
|
SYNTAX RcSysAccPolSnmpGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table entry which covers the groups under snmp service."
|
|
INDEX { rcSysAccessPolicyId, rcSysAccPolSnmpGrpName, rcSysAccPolSnmpGrpModel}
|
|
::= { rcSysAccPolSnmpGrpTable 1 }
|
|
|
|
RcSysAccPolSnmpGrpEntry ::=
|
|
SEQUENCE {
|
|
rcSysAccPolSnmpGrpName SnmpAdminString,
|
|
rcSysAccPolSnmpGrpModel SnmpSecurityModel,
|
|
rcSysAccPolSnmpGrpRowStatus RowStatus
|
|
}
|
|
|
|
rcSysAccPolSnmpGrpName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The snmp-v3 group name"
|
|
::= { rcSysAccPolSnmpGrpEntry 1 }
|
|
|
|
rcSysAccPolSnmpGrpModel OBJECT-TYPE
|
|
SYNTAX SnmpSecurityModel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The snmp model"
|
|
::= { rcSysAccPolSnmpGrpEntry 2 }
|
|
|
|
rcSysAccPolSnmpGrpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status"
|
|
::= { rcSysAccPolSnmpGrpEntry 3 }
|
|
|
|
-- This is mib have no JDM support
|
|
|
|
|
|
-- Trap Sender Address Table
|
|
|
|
rcSysTrapSenderTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSysTrapSenderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The trap sender table (0 to 25 entries). This
|
|
table lists the addresses of Network Management
|
|
Stations and the Source Address that should receive
|
|
trap messages from this entity when an exception
|
|
condition occurs."
|
|
::= { rcSystem 62 }
|
|
|
|
rcSysTrapSenderEntry OBJECT-TYPE
|
|
SYNTAX RcSysTrapSenderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A trap sender table entry."
|
|
INDEX { rcSysTrapSenderRecvAddress }
|
|
::= { rcSysTrapSenderTable 1 }
|
|
|
|
RcSysTrapSenderEntry ::=
|
|
SEQUENCE {
|
|
rcSysTrapSenderRecvAddress IpAddress,
|
|
rcSysTrapSenderSrcAddress IpAddress
|
|
}
|
|
|
|
rcSysTrapSenderRecvAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address for trap receiver."
|
|
::= { rcSysTrapSenderEntry 1 }
|
|
|
|
rcSysTrapSenderSrcAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP address for trap sender."
|
|
::= { rcSysTrapSenderEntry 2 }
|
|
|
|
-- DNS Server List Mibs
|
|
|
|
rcSysDnsServerListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
table."
|
|
::= { rcSystem 63 }
|
|
|
|
rcSysDnsServerListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSysDnsServerListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DNS serever list table used to store the
|
|
details of the DNS server configured."
|
|
::= { rcSystem 64 }
|
|
|
|
rcSysDnsServerListEntry OBJECT-TYPE
|
|
SYNTAX RcSysDnsServerListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcSysDnsServerListType }
|
|
::= { rcSysDnsServerListTable 1 }
|
|
|
|
RcSysDnsServerListEntry ::=
|
|
SEQUENCE {
|
|
rcSysDnsServerListType INTEGER,
|
|
rcSysDnsServerListIp IpAddress, -- deprecated
|
|
rcSysDnsServerListStatus INTEGER,
|
|
rcSysDnsServerListRequestCount Counter32,
|
|
rcSysDnsServerListSuccessCount Counter32,
|
|
rcSysDnsServerListRowStatus RowStatus,
|
|
rcSysDnsServerListAddressType InetAddressType,
|
|
rcSysDnsServerListAddress InetAddress
|
|
}
|
|
|
|
rcSysDnsServerListType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(0),
|
|
secondary(1),
|
|
tertiary(2),
|
|
primaryDynamic(3),
|
|
secondaryDynamic(4),
|
|
tertiaryDynamic(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of the DNS server"
|
|
::= { rcSysDnsServerListEntry 1 }
|
|
|
|
rcSysDnsServerListIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "IP address of the DNS server"
|
|
::= { rcSysDnsServerListEntry 2 }
|
|
|
|
rcSysDnsServerListStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(0),
|
|
in-active(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Status of DNS server"
|
|
::= { rcSysDnsServerListEntry 3 }
|
|
|
|
rcSysDnsServerListRequestCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of request send to this server"
|
|
::= { rcSysDnsServerListEntry 4 }
|
|
|
|
rcSysDnsServerListSuccessCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of request send to this server which
|
|
are successful"
|
|
::= { rcSysDnsServerListEntry 5 }
|
|
|
|
rcSysDnsServerListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete DNS server entries
|
|
in rcSysDnsServerListTable."
|
|
::= { rcSysDnsServerListEntry 6 }
|
|
|
|
rcSysDnsServerListAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The type of ip address configured by the DNS server"
|
|
::= { rcSysDnsServerListEntry 7 }
|
|
|
|
rcSysDnsServerListAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The ip address configured by the DNS server"
|
|
::= { rcSysDnsServerListEntry 8 }
|
|
|
|
|
|
-- DNS Host Table
|
|
|
|
rcSysDnsHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSysDnsHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DNS Host table."
|
|
::= { rcSystem 65 }
|
|
|
|
rcSysDnsHostEntry OBJECT-TYPE
|
|
SYNTAX RcSysDnsHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcSysDnsHostData }
|
|
::= { rcSysDnsHostTable 1 }
|
|
|
|
RcSysDnsHostEntry ::=
|
|
SEQUENCE {
|
|
rcSysDnsHostData OCTET STRING,
|
|
rcSysDnsHostName OCTET STRING,
|
|
rcSysDnsHostIpAddress IpAddress, -- deprecated
|
|
rcSysDnsHostSource OCTET STRING,
|
|
rcSysDnsHostAddressType InetAddressType,
|
|
rcSysDnsHostAddress InetAddress
|
|
}
|
|
|
|
rcSysDnsHostData OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host Name or Host IP Address."
|
|
::= { rcSysDnsHostEntry 1 }
|
|
|
|
rcSysDnsHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host Name."
|
|
::= { rcSysDnsHostEntry 2 }
|
|
|
|
rcSysDnsHostIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Host IP Address."
|
|
::= { rcSysDnsHostEntry 3 }
|
|
|
|
rcSysDnsHostSource OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DNS Server IP or /etc/host file."
|
|
::= { rcSysDnsHostEntry 4 }
|
|
|
|
rcSysDnsHostAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of ip address for the DNS host"
|
|
::= { rcSysDnsHostEntry 5 }
|
|
|
|
rcSysDnsHostAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The ip address of the DNS host"
|
|
::= { rcSysDnsHostEntry 6 }
|
|
|
|
|
|
rcSysMsgLogFrequency OBJECT-TYPE
|
|
SYNTAX Integer32 (2..500)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the maximum frequency/count
|
|
of the occurence of the Log Message."
|
|
::= { rcSystem 66 }
|
|
|
|
rcSysMsgLogText OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..3))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A textual string containing the first four
|
|
characters of the Log Message."
|
|
::= { rcSystem 67 }
|
|
|
|
rcSysForceIpHdrSender OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to decide if IP header source address will
|
|
be matched with SNMP header sender networks."
|
|
DEFVAL { false }
|
|
::= { rcSystem 68 }
|
|
|
|
rcSysVlanMaxId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
maxId2000(2000),
|
|
maxId4000(4000)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum vlan Id that supported"
|
|
DEFVAL { maxId2000 }
|
|
::= { rcSystem 69 }
|
|
|
|
rcSysDnsDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Default domain used for querying the DNS Server."
|
|
::= { rcSystem 70 }
|
|
|
|
|
|
rcSysDnsServerListIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DNS server's IP address "
|
|
::= { rcSystem 71 }
|
|
|
|
rcSysDnsRequestType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
request (0),
|
|
response (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DNS Type: Whether it was Dns Request or a Response"
|
|
::= { rcSystem 72 }
|
|
|
|
rcSysSpanningTreeOperMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nortelStpg(1),
|
|
pvst(2),
|
|
rstp(3),
|
|
mstp(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the current spanning-tree mode of the system. .
|
|
The meaning of specific values is:
|
|
nortelStpg(1) .. The older proprietary mode which supports multiple spanning tree groups.
|
|
pvst(2) ........ Emulation of C***O spanning tree mode
|
|
rstp(3) ........ IEEE 802.1w mode
|
|
mstp(4) ........ IEEE 802.1s mode ."
|
|
DEFVAL { nortelStpg }
|
|
::= { rcSystem 73}
|
|
|
|
rcSysSpanningTreeAdminMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nortelStpg(1),
|
|
pvst(2),
|
|
rstp(3),
|
|
mstp(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the desired spanning-tree mode of the system.
|
|
The meaning of specific values is:
|
|
nortelStpg(1) .. The older proprietary mode which supports multiple spanning tree groups.
|
|
pvst(2) ........ Emulation of C***O spanning tree mode
|
|
rstp(3) ........ IEEE 802.1w mode
|
|
mstp(4) ........ IEEE 802.1s mode
|
|
|
|
Note that depending on the current value of rcSysSpanningTreeOperMode and
|
|
the value to which this object is set, the operational mode may be immediately changed,
|
|
or the change may not take effect until the next system reboot."
|
|
DEFVAL { nortelStpg }
|
|
::= { rcSystem 74}
|
|
|
|
rcSysAutoRecoverDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (5..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds after which auto-recovery
|
|
runs on ports to clear action taken by cp-limit,
|
|
link flap or loop detect"
|
|
DEFVAL { 30 }
|
|
::= { rcSystem 75 }
|
|
|
|
rcSysMacFlapLimitTime OBJECT-TYPE
|
|
SYNTAX Integer32 (10..5000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time limit in milliseconds for MAC flapping for
|
|
loop-detect feature"
|
|
::= { rcSystem 76 }
|
|
|
|
rcSysMacFlapLimitCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times mac flapping can happen for loop-detect
|
|
feature"
|
|
::= { rcSystem 77 }
|
|
|
|
rcSysExtCplimitEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable or disable extended CP-LIMIT in system."
|
|
DEFVAL { false }
|
|
::= { rcSystem 78 }
|
|
|
|
rcSysExtCplimitMinCongTime OBJECT-TYPE
|
|
SYNTAX Integer32 (100..6000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Minimum time for which System octapid should be
|
|
congested to trigger congestion algorithm for extended
|
|
CP-LIMIT in mSecs"
|
|
DEFVAL { 3000 }
|
|
::= { rcSystem 79 }
|
|
|
|
rcSysExtCplimitMaxPorts OBJECT-TYPE
|
|
SYNTAX Integer32 (0..512)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of ports which need to be monitored
|
|
for congestion in Extended CP-LIMIT"
|
|
DEFVAL { 0 }
|
|
::= { rcSystem 80 }
|
|
|
|
rcSysExtCplimitPortCongTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Minimum time for which ingress traffic utilization rate
|
|
of a monitored port should stay more than the allowed limits
|
|
in order to disable the port for extended CP-LIMIT in Secs"
|
|
DEFVAL { 300 }
|
|
::= { rcSystem 81 }
|
|
|
|
rcSysExtCplimitTrapLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
normal(2),
|
|
verbose(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the trap level for extended CP-LIMIT"
|
|
DEFVAL { none }
|
|
::= { rcSystem 82 }
|
|
|
|
rcSysExtCplimitSysOctapidCongested OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether system octapid congestion detected for
|
|
extended cp-limit"
|
|
DEFVAL { false }
|
|
::= {rcSystem 83 }
|
|
|
|
rcSysExtCplimitPortsMonitored OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether ports has been shutdown due to extended
|
|
cp-limit"
|
|
DEFVAL { false }
|
|
::= {rcSystem 84 }
|
|
|
|
rcSysExtCplimitPortsShutDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether ports has been shutdown due to
|
|
extended Cp-limit"
|
|
DEFVAL { false }
|
|
::= {rcSystem 85 }
|
|
|
|
rcSysActionL1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
resetCounters(2), -- reset all statistic counters
|
|
saveToNVRAM(3),
|
|
saveToStandbyNVRAM(4), -- save config to slave NVRAM
|
|
checkSwInFlash(5),
|
|
checkSwInPcmcia(6),
|
|
saveRuntimeConfig(7), -- 8k only
|
|
saveRuntimeConfigToSlave(8), -- 8k only
|
|
saveBootConfig(9), -- 8k only
|
|
saveSlaveBootConfig(10), -- 8k only
|
|
loadLicense(11),
|
|
revokeLicensePremier(12), -- U100 only
|
|
revokeLicenseMacsec(13) -- U100 only
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Initiate a system action for layer1 user"
|
|
DEFVAL { none }
|
|
::= { rcSystem 86 }
|
|
|
|
rcSysActionL2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
resetIstStatCounters(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Initiate a system action for layer2 user"
|
|
DEFVAL { none }
|
|
::= { rcSystem 87 }
|
|
|
|
rcSysActionL3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
flushIpRouteTbl(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Initiate a system action for layer3 user"
|
|
DEFVAL { none }
|
|
::= { rcSystem 88 }
|
|
|
|
rcSysActionRwa OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
hardReset(2), -- power on tests
|
|
softReset(3), -- reset w/o power on tests
|
|
cpuSwitchOver(4), -- CPU board switch-over
|
|
resetConsole(5),
|
|
resetModem(6),
|
|
-- being used in rel2.2(7)
|
|
-- being used in rel2.2(8)
|
|
-- reserve(9)
|
|
-- reserve(10)
|
|
setCsuAuto(11),
|
|
upgradeComplete(12),
|
|
bootUpgrade(13),
|
|
softResetCoreDump(14) -- reset with coredump
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Initiate a system action."
|
|
DEFVAL { none }
|
|
::= { rcSystem 89 }
|
|
|
|
rcSysPowerUsage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current power usage for the whole chassis."
|
|
::= { rcSystem 90 }
|
|
|
|
rcSysPowerAvailable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current power available for the whole chassis."
|
|
::= { rcSystem 91 }
|
|
|
|
rcSysBpduStartMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Starting Multicast MAC address for BPDUs"
|
|
::= { rcSystem 92 }
|
|
|
|
rcSysBpduMacAddressMask OBJECT-TYPE
|
|
SYNTAX Integer32 (1..48)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "BPDU MAC address Mask"
|
|
::= { rcSystem 93 }
|
|
|
|
rcSysFrcMsgControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSysFrcMsgControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Management Force-msg Control table. This table is used to
|
|
specify the pattern for Force-msg Control"
|
|
::= { rcSystem 94 }
|
|
|
|
rcSysVirtualIpv6Addr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Virtual IP is an IP address that owned and
|
|
advertised only by the master CPU. So whichever
|
|
CPU is master registers this IP address."
|
|
::= { rcSystem 96 }
|
|
|
|
rcSysVirtualIpv6PrefixLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The length of the virtual ipv6 addr prefix (in bits)."
|
|
::= { rcSystem 97 }
|
|
|
|
rcSysConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nncli(1),
|
|
cli(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is used in conjunction with rcSysAction inorder
|
|
to decide the mode in which the config file is going to
|
|
be saved in."
|
|
::= {rcSystem 98}
|
|
|
|
-- Extended PING Bypass
|
|
|
|
rcSysExtendedPingBypass OBJECT IDENTIFIER ::= { rcSystem 99 }
|
|
|
|
rcSysExtendedPingBypassOUI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "24-bit Organizationally Unique Idetifier.
|
|
Information on OUIs can be found in IEEE 802-2001
|
|
Clause 9."
|
|
::= { rcSysExtendedPingBypass 1 }
|
|
|
|
rcSysExtendedPingBypassMaxRate OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Rate Limit in Mbps."
|
|
DEFVAL { 1 }
|
|
::= { rcSysExtendedPingBypass 2 }
|
|
|
|
rcSysExtendedPingBypassAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Admin control for extended ping bypass."
|
|
DEFVAL { disable }
|
|
::= { rcSysExtendedPingBypass 3 }
|
|
|
|
rcSysExtendedPingBypassMatch OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
src-mac(1),
|
|
dst-mac(2),
|
|
either(3),
|
|
both(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Bypass policer if the oui matches src-mac
|
|
or dst-mac or either or both."
|
|
DEFVAL { src-mac }
|
|
::= { rcSysExtendedPingBypass 4 }
|
|
|
|
-- Extended PING Bypass end
|
|
|
|
rcSysLicenseTrialDaysLeft OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..60)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This indicates days left before License Trial
|
|
Period will expire."
|
|
::= { rcSystem 100}
|
|
|
|
--rcSysSingleMgmtIpAddr OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Single Managament IP Address "
|
|
-- ::= { rcSystem 101 }
|
|
|
|
rcSysLicenseFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "File name used in conjunction with rcSysAction.
|
|
This file name will be used to specify a PLDS License file"
|
|
::= { rcSystem 101 }
|
|
|
|
rcSysCopHighCpuUtilThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (60..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "CopHighCpuUtilThreshold %"
|
|
DEFVAL { 100 }
|
|
::= { rcSystem 102 }
|
|
|
|
rcSysCopHighCpuUtilLogTime OBJECT-TYPE
|
|
SYNTAX Integer32 (20..90)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "rcSysCopHighCpuUtilLogTime in secs"
|
|
DEFVAL { 30 }
|
|
::= { rcSystem 103 }
|
|
|
|
rcSysConfigChangeFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether the config file has been changed after loading of config"
|
|
DEFVAL { false }
|
|
::= { rcSystem 104 }
|
|
|
|
rcSysBootUpgradeMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoCommit(1),
|
|
manualCommit(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set the mode of bootupgrade "
|
|
DEFVAL { autoCommit }
|
|
::= { rcSystem 105 }
|
|
|
|
rcSysBootUpgradeTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set time for bootupgrade "
|
|
DEFVAL { 30 }
|
|
::= { rcSystem 106 }
|
|
|
|
rcSysBootUpgradeCsuMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
fullauto(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set the mode of Csu for bootupgrade "
|
|
DEFVAL { none }
|
|
::= { rcSystem 107 }
|
|
|
|
rcSysUpgradeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notInitiated(1),
|
|
complete(2),
|
|
inProgress(3),
|
|
failed(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "To get the Upgrade status "
|
|
DEFVAL { notInitiated }
|
|
::= { rcSystem 108 }
|
|
|
|
rcSysUpgradeCompleteStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notRequired(1),
|
|
notConfirmed(2),
|
|
confirmed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "To get the Upgrade status"
|
|
DEFVAL { notRequired }
|
|
::= { rcSystem 109 }
|
|
|
|
rcSysBootUpgradeConsistencyCheck OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable or disable the consistency check in BootUpgrade"
|
|
DEFVAL { enable }
|
|
::= { rcSystem 110 }
|
|
|
|
rcSysAutoSaveConfigState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable or disable the autosaveconfig feature"
|
|
DEFVAL { disable }
|
|
::= { rcSystem 111}
|
|
rcSysAutoSaveConfigFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The auto config file name in which the configurations have to be saved automatically."
|
|
::= { rcSystem 112 }
|
|
|
|
rcSysAutoSaveConfigInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (15..75)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set the Interval for autosave config"
|
|
DEFVAL { 30 }
|
|
::= { rcSystem 113 }
|
|
|
|
rcSysAutoSaveConfigChangeFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether there are any configuration changes after last auto save config."
|
|
DEFVAL { false }
|
|
::= { rcSystem 114 }
|
|
|
|
rcSysAutoSaveConfigCounter OBJECT-TYPE
|
|
SYNTAX Integer32 (1..5)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Auto save config counter that should be prefixed to the filename."
|
|
DEFVAL { 1 }
|
|
::= { rcSystem 115 }
|
|
|
|
rcSysTotalPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total power for the whole chassis."
|
|
::= { rcSystem 116 }
|
|
|
|
rcSysRedundantPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the redundant power on the chassis.
|
|
The redundant power is per power supply unit"
|
|
::= { rcSystem 117 }
|
|
|
|
rcSysAuthSuccessTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable the trap send for authenticaion
|
|
success trap rcnAuthenticationSuccess. It only allow
|
|
to be set when snmpEnableAuthenTraps is enabled.
|
|
I will be set to disable when snmpEnableAuthenTraps is
|
|
disabled"
|
|
::= { rcSystem 118 }
|
|
|
|
rcSysUdpSrcByVirtualIpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable virtual ip as udp source."
|
|
DEFVAL { false }
|
|
::= { rcSystem 119 }
|
|
|
|
rcSysDataPathFaultShutdownEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable data path fault shutdown."
|
|
DEFVAL { true }
|
|
::= { rcSystem 121 }
|
|
|
|
rcSysDnsServerIpv6Addr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "DNS server's IP address . Used by trap rcnDNSv6RequestResponseTrap "
|
|
::= { rcSystem 122 }
|
|
|
|
|
|
--Software Release Info
|
|
|
|
rcSysSoftwareTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSysSoftwareEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of software releases added to the switch. Maximum
|
|
of 6 added releases can be present in the switch."
|
|
::= { rcSystem 120 }
|
|
|
|
rcSysSoftwareEntry OBJECT-TYPE
|
|
SYNTAX RcSysSoftwareEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Defines a row of rcSysSoftware Table using
|
|
RcSysSoftwareEntry Type."
|
|
INDEX { rcSysReleaseName }
|
|
::= { rcSysSoftwareTable 1 }
|
|
|
|
RcSysSoftwareEntry ::= SEQUENCE
|
|
{
|
|
rcSysReleaseName DisplayString,
|
|
rcSysReleaseAddedTime DateAndTime,
|
|
rcSysReleaseActivatedTime DateAndTime,
|
|
rcSysReleaseCommittedTime DateAndTime,
|
|
rcSysReleaseCommittedType INTEGER,
|
|
rcSysReleaseType INTEGER
|
|
}
|
|
|
|
|
|
rcSysReleaseName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Software Release Name"
|
|
::= { rcSysSoftwareEntry 1 }
|
|
|
|
rcSysReleaseAddedTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Software Release Added Date and Time"
|
|
::= { rcSysSoftwareEntry 2 }
|
|
|
|
rcSysReleaseActivatedTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Software Release Activated Date and Time"
|
|
::= { rcSysSoftwareEntry 3 }
|
|
|
|
rcSysReleaseCommittedTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Software Release Committed Date and Time"
|
|
::= { rcSysSoftwareEntry 4 }
|
|
|
|
rcSysReleaseCommittedType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1), -- Release was auto-committed
|
|
manual(2), -- Release was Manually committed
|
|
notCommitted(3), --Release was not committed
|
|
none(4) -- Details not available for this release
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Software Release Committed Type"
|
|
::= { rcSysSoftwareEntry 5 }
|
|
|
|
rcSysReleaseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1), -- The Release is a primary release
|
|
backup(2), -- The Release is a backup release
|
|
notUsed(3) -- The Release is added but not being used
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Software Release Type. This element tells whether the
|
|
release is a primary release for the switch or a backup
|
|
release or that the release has been added to the switch
|
|
but is not being used currently."
|
|
::= { rcSysSoftwareEntry 6 }
|
|
|
|
rcSysFrcMsgControlEntry OBJECT-TYPE
|
|
SYNTAX RcSysFrcMsgControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A Force-msg Control table entry."
|
|
INDEX { rcSysFrcMsgControlPatternId }
|
|
::= { rcSysFrcMsgControlTable 1 }
|
|
|
|
RcSysFrcMsgControlEntry ::=
|
|
SEQUENCE {
|
|
rcSysFrcMsgControlPatternId Integer32,
|
|
rcSysFrcMsgControlPattern DisplayString,
|
|
rcSysFrcMsgControlRowStatus RowStatus
|
|
}
|
|
|
|
rcSysFrcMsgControlPatternId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pattern Id."
|
|
::= { rcSysFrcMsgControlEntry 1 }
|
|
|
|
|
|
rcSysFrcMsgControlPattern OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Pattern for filtering the force-msg for msg control"
|
|
::= { rcSysFrcMsgControlEntry 2 }
|
|
|
|
rcSysFrcMsgControlRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete an entry"
|
|
::= { rcSysFrcMsgControlEntry 3 }
|
|
|
|
-- TFTP Upload/Download
|
|
|
|
rcTftpHost OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of source/destination host for the TFTP
|
|
transfer."
|
|
::= { rcTftp 1 }
|
|
|
|
rcTftpFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of file for the TFTP transfer."
|
|
::= { rcTftp 2 }
|
|
|
|
rcTftpAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
downloadConfig(2),
|
|
uploadConfig(3),
|
|
downloadSwToFlash(4),
|
|
downloadSwToPcmcia(5),
|
|
uploadSw(6),
|
|
downloadSwToDram(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The action for the TFTP transfer."
|
|
DEFVAL { none }
|
|
::= { rcTftp 3 }
|
|
|
|
rcTftpResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
inProgress(2),
|
|
noResponse(3),
|
|
fileAccessError(4),
|
|
badFlash(5),
|
|
flashEraseFailed(6),
|
|
pcmciaEraseFailed(7),
|
|
success(8),
|
|
fail(9),
|
|
writeToNvramFailed(10),
|
|
flashWriteFailed(11),
|
|
pcmciaWriteFailed(12),
|
|
configFileTooBig(13),
|
|
imageFileTooBig(14),
|
|
noPcmciaDetect(15),
|
|
pcmciaNotSupported(16),
|
|
invalidFile(17),
|
|
noMemory(18),
|
|
xferError(19),
|
|
crcError(20),
|
|
readNvramFailed(21),
|
|
pcmciaWriteProtect(22)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Contains result of the last Tftp action request."
|
|
::= { rcTftp 4 }
|
|
|
|
--
|
|
-- IKE
|
|
--
|
|
|
|
--
|
|
-- IKE Profile Table
|
|
--
|
|
rcIkeProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of profiles
|
|
consisting of algorithms and other
|
|
configuration that can be used during an
|
|
IKE Phase 1 connection."
|
|
::= { rcIke 1 }
|
|
|
|
rcIkeProfileEntry OBJECT-TYPE
|
|
SYNTAX RcIkeProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing configuration information
|
|
for authentication algorithms, encryption
|
|
algorithms, Diffie-Helman group, exchange-mode
|
|
and lifetime-seconds to be used for a Phase 1
|
|
negotiation."
|
|
INDEX { rcIkeProfileName }
|
|
::= { rcIkeProfileTable 1 }
|
|
|
|
RcIkeProfileEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkeProfileName DisplayString,
|
|
rcIkeProfileHashAlgorithm INTEGER,
|
|
rcIkeProfileEncryptionAlgorithm INTEGER,
|
|
rcIkeProfileEncryptKeyLen INTEGER,
|
|
rcIkeProfileDHGroup INTEGER,
|
|
rcIkeProfileExchangeMode INTEGER,
|
|
rcIkeProfileLifetimeSeconds Unsigned32,
|
|
rcIkeProfileRowStatus RowStatus
|
|
}
|
|
rcIkeProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains the name of this Profile."
|
|
::= { rcIkeProfileEntry 1 }
|
|
|
|
rcIkeProfileHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5(1),
|
|
sha(2),
|
|
sha256(4),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithms
|
|
that can be used during IKE Phase 1 SA
|
|
negotiation."
|
|
DEFVAL { sha256 }
|
|
::= { rcIkeProfileEntry 2 }
|
|
|
|
rcIkeProfileEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
desCbc(1),
|
|
tripleDesCbc(5),
|
|
aesCbc(7),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithms that can be used during IKE
|
|
Phase 1 SA negotiation."
|
|
DEFVAL { aesCbc }
|
|
::= { rcIkeProfileEntry 3 }
|
|
rcIkeProfileEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER (128|192|256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the key length
|
|
that should be be used during IKE
|
|
Phase 1 SA negotiation."
|
|
DEFVAL { 256 }
|
|
::= { rcIkeProfileEntry 4 }
|
|
|
|
rcIkeProfileDHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
groups that can be used during IKE Phase 1
|
|
SA negotiation."
|
|
DEFVAL { modp2048 }
|
|
::= { rcIkeProfileEntry 5 }
|
|
|
|
rcIkeProfileExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE Phase 1
|
|
negotiation mode. Only main mode is
|
|
supported for this release."
|
|
DEFVAL { main }
|
|
::= { rcIkeProfileEntry 6 }
|
|
rcIkeProfileLifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE Phase 1 SA remain valid during
|
|
IKE Phase 1 negotiation. A value of 0 means no
|
|
expiration."
|
|
DEFVAL { 86400 }
|
|
::= { rcIkeProfileEntry 7 }
|
|
|
|
rcIkeProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to create or delete
|
|
entries in this table."
|
|
::= { rcIkeProfileEntry 8 }
|
|
|
|
--
|
|
-- IKE Policy Table
|
|
--
|
|
|
|
rcIkePolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of IKE Phase 1
|
|
policy entries."
|
|
::= { rcIke 2 }
|
|
|
|
rcIkePolicyEntry OBJECT-TYPE
|
|
SYNTAX RcIkePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { rcIkePolicyLocalIfIndex,
|
|
rcIkePolicyLocalAddrType,
|
|
rcIkePolicyLocalAddr,
|
|
rcIkePolicyRemoteAddrType,
|
|
rcIkePolicyRemoteAddr
|
|
}
|
|
::= { rcIkePolicyTable 1 }
|
|
RcIkePolicyEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkePolicyLocalIfIndex InterfaceIndex,
|
|
rcIkePolicyLocalAddrType InetAddressType,
|
|
rcIkePolicyLocalAddr InetAddress,
|
|
rcIkePolicyRemoteAddrType InetAddressType,
|
|
rcIkePolicyRemoteAddr InetAddress,
|
|
rcIkePolicyName DisplayString,
|
|
rcIkePolicyProfileName DisplayString,
|
|
rcIkePolicyAuthenticationMethod INTEGER,
|
|
rcIkePolicyPSKValue DisplayString,
|
|
rcIkePolicyDPDTimeout Unsigned32,
|
|
rcIkePolicyP2PFS EnableValue,
|
|
rcIkePolicyP2PfsUseIkeGroup EnableValue,
|
|
rcIkePolicyP2PfsDHGroup INTEGER,
|
|
rcIkePolicyAdminState+
|
|
|
|
--
|
|
-- IKE
|
|
--
|
|
|
|
--
|
|
-- IKE Profile Table
|
|
--
|
|
rcIkeProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of profiles
|
|
consisting of algorithms and other
|
|
configuration that can be used during an
|
|
IKE Phase 1 connection."
|
|
::= { rcIke 1 }
|
|
|
|
rcIkeProfileEntry OBJECT-TYPE
|
|
SYNTAX RcIkeProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing configuration information
|
|
for authentication algorithms, encryption
|
|
algorithms, Diffie-Helman group, exchange-mode
|
|
and lifetime-seconds to be used for a Phase 1
|
|
negotiation."
|
|
INDEX { rcIkeProfileName }
|
|
::= { rcIkeProfileTable 1 }
|
|
|
|
RcIkeProfileEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkeProfileName DisplayString,
|
|
rcIkeProfileHashAlgorithm INTEGER,
|
|
rcIkeProfileEncryptionAlgorithm INTEGER,
|
|
rcIkeProfileEncryptKeyLen INTEGER,
|
|
rcIkeProfileDHGroup INTEGER,
|
|
rcIkeProfileExchangeMode INTEGER,
|
|
rcIkeProfileLifetimeSeconds Unsigned32,
|
|
rcIkeProfileRowStatus RowStatus
|
|
}
|
|
rcIkeProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains the name of this Profile."
|
|
::= { rcIkeProfileEntry 1 }
|
|
|
|
rcIkeProfileHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5(1),
|
|
sha(2),
|
|
sha256(4),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithms
|
|
that can be used during IKE Phase 1 SA
|
|
negotiation."
|
|
DEFVAL { sha256 }
|
|
::= { rcIkeProfileEntry 2 }
|
|
|
|
rcIkeProfileEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
desCbc(1),
|
|
tripleDesCbc(5),
|
|
aesCbc(7),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithms that can be used during IKE
|
|
Phase 1 SA negotiation."
|
|
DEFVAL { aesCbc }
|
|
::= { rcIkeProfileEntry 3 }
|
|
rcIkeProfileEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER (128|192|256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the key length
|
|
that should be be used during IKE
|
|
Phase 1 SA negotiation."
|
|
DEFVAL { 256 }
|
|
::= { rcIkeProfileEntry 4 }
|
|
|
|
rcIkeProfileDHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
groups that can be used during IKE Phase 1
|
|
SA negotiation."
|
|
DEFVAL { modp2048 }
|
|
::= { rcIkeProfileEntry 5 }
|
|
|
|
rcIkeProfileExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE Phase 1
|
|
negotiation mode. Only main mode is
|
|
supported for this release."
|
|
DEFVAL { main }
|
|
::= { rcIkeProfileEntry 6 }
|
|
rcIkeProfileLifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE Phase 1 SA remain valid during
|
|
IKE Phase 1 negotiation. A value of 0 means no
|
|
expiration."
|
|
DEFVAL { 86400 }
|
|
::= { rcIkeProfileEntry 7 }
|
|
|
|
rcIkeProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to create or delete
|
|
entries in this table."
|
|
::= { rcIkeProfileEntry 8 }
|
|
|
|
--
|
|
-- IKE Policy Table
|
|
--
|
|
|
|
rcIkePolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of IKE Phase 1
|
|
policy entries."
|
|
::= { rcIke 2 }
|
|
|
|
rcIkePolicyEntry OBJECT-TYPE
|
|
SYNTAX RcIkePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { rcIkePolicyLocalIfIndex,
|
|
rcIkePolicyLocalAddrType,
|
|
rcIkePolicyLocalAddr,
|
|
rcIkePolicyRemoteAddrType,
|
|
rcIkePolicyRemoteAddr
|
|
}
|
|
::= { rcIkePolicyTable 1 }
|
|
RcIkePolicyEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkePolicyLocalIfIndex InterfaceIndex,
|
|
rcIkePolicyLocalAddrType InetAddressType,
|
|
rcIkePolicyLocalAddr InetAddress,
|
|
rcIkePolicyRemoteAddrType InetAddressType,
|
|
rcIkePolicyRemoteAddr InetAddress,
|
|
rcIkePolicyName DisplayString,
|
|
rcIkePolicyProfileName DisplayString,
|
|
rcIkePolicyAuthenticationMethod INTEGER,
|
|
rcIkePolicyPSKValue DisplayString,
|
|
rcIkePolicyDPDTimeout Unsigned32,
|
|
rcIkePolicyP2PFS EnableValue,
|
|
rcIkePolicyP2PfsUseIkeGroup EnableValue,
|
|
rcIkePolicyP2PfsDHGroup INTEGER,
|
|
rcIkePolicyAdminState EnableValue,
|
|
rcIkePolicyOperStatus INTEGER,
|
|
rcIkePolicyRowStatus RowStatus,
|
|
rcIkePolicyRevocationCheckMethod INTEGER,
|
|
rcIkePolicyProfileVersion INTEGER,
|
|
rcIkePolicyPeerName DisplayString
|
|
}
|
|
|
|
rcIkePolicyLocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Interface Index
|
|
of the local address.
|
|
Only port and vlan if-index are supported
|
|
for this release."
|
|
::= { rcIkePolicyEntry 1 }
|
|
|
|
rcIkePolicyLocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkePolicyLocalAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkePolicyEntry 2 }
|
|
rcIkePolicyLocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string
|
|
representation of the local peer ID.
|
|
The type of value configured for this
|
|
object is specified by the
|
|
rcIkePolicyLocalAddrType."
|
|
::= { rcIkePolicyEntry 3 }
|
|
|
|
rcIkePolicyRemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkePolicyRemoteAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkePolicyEntry 4 }
|
|
|
|
rcIkePolicyRemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string
|
|
representation of the remote peer ID.
|
|
The type of value configured for this
|
|
object is specified by the
|
|
rcIkePolicyRemoteAddrType."
|
|
::= { rcIkePolicyEntry 5 }
|
|
|
|
rcIkePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name given to the policy.
|
|
The name should be assigned during creation of
|
|
the policy. Changing the name after the policy
|
|
is created is not allowed."
|
|
::= { rcIkePolicyEntry 6 }
|
|
rcIkePolicyProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name of the profile
|
|
(rcIkeProfileName) that should be used for
|
|
this policy."
|
|
::= { rcIkePolicyEntry 7 }
|
|
|
|
rcIkePolicyAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
preSharedKey(1),
|
|
dssSignatures(2),
|
|
rsaSignatures(3),
|
|
encryptionWithRsa(4),
|
|
digitalCertificate(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
authentication method for the phase 1
|
|
security association.
|
|
Only the Pre-Shared Key authentication
|
|
method is supported in this release."
|
|
DEFVAL { preSharedKey }
|
|
::= { rcIkePolicyEntry 8 }
|
|
|
|
rcIkePolicyPSKValue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the value of the
|
|
Pre-Shared Key if the authentication method
|
|
is set to PSK."
|
|
::= { rcIkePolicyEntry 9 }
|
|
|
|
rcIkePolicyDPDTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Dead Peer
|
|
Detection timeout in seconds."
|
|
DEFVAL { 300 }
|
|
::= { rcIkePolicyEntry 10 }
|
|
rcIkePolicyP2PFS OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether or not perfect
|
|
forward secrecy is used when refreshing keys.
|
|
Enable indicates that PFS SHOULD be used."
|
|
DEFVAL { disable }
|
|
::= { rcIkePolicyEntry 11 }
|
|
|
|
rcIkePolicyP2PfsUseIkeGroup OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether or not to use
|
|
the same GroupId (Diffie-Hellman Group) for
|
|
phase 2 as was used in phase 1. If P2PFS is
|
|
disabled, this entry SHOULD be ignored."
|
|
DEFVAL { enable }
|
|
::= { rcIkePolicyEntry 12 }
|
|
|
|
rcIkePolicyP2PfsDHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman group
|
|
to use for phase 2 when the object
|
|
rcIkePolicyP2PFS is enabled and the object
|
|
rcIkePolicyP2PfsUseIkeGroup is disabled."
|
|
DEFVAL { modp1024 }
|
|
::= { rcIkePolicyEntry 13 }
|
|
|
|
|
|
rcIkePolicyAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether the policy
|
|
is administratively enabled or disabled."
|
|
DEFVAL { disable }
|
|
::= { rcIkePolicyEntry 14 }
|
|
|
|
rcIkePolicyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether the policy
|
|
is operationally up or down."
|
|
::= { rcIkePolicyEntry 15 }
|
|
|
|
rcIkePolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to create or delete
|
|
entries in this table."
|
|
::= { rcIkePolicyEntry 16 }
|
|
|
|
rcIkePolicyRevocationCheckMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
crl(1),
|
|
ocsp(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
revocation-check method for digital-certificate
|
|
type authentication-method."
|
|
DEFVAL { crl }
|
|
::= { rcIkePolicyEntry 17 }
|
|
|
|
rcIkePolicyProfileVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
v1(1),
|
|
v2(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object maps to the version
|
|
of ike profile selected. Default value of
|
|
this object is version 1 (v1)"
|
|
DEFVAL {v1}
|
|
::= { rcIkePolicyEntry 18 }
|
|
|
|
rcIkePolicyPeerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the value of the
|
|
Peer name if the authentication method
|
|
is set to digital certificate."
|
|
::= { rcIkePolicyEntry 19 }
|
|
|
|
-- IKE ACTIVE SA TABLE
|
|
|
|
rcIkeActiveSATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeActiveSAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of IKE Phase 1
|
|
Security Association entries."
|
|
::= { rcIke 4 }
|
|
|
|
rcIkeActiveSAEntry OBJECT-TYPE
|
|
SYNTAX RcIkeActiveSAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { rcIkeActiveSAId,
|
|
rcIkeActiveSALocalIfIndex,
|
|
rcIkeActiveSALocalAddrType,
|
|
rcIkeActiveSALocalAddr,
|
|
rcIkeActiveSARemoteAddrType,
|
|
rcIkeActiveSARemoteAddr
|
|
}
|
|
::= { rcIkeActiveSATable 1 }
|
|
|
|
RcIkeActiveSAEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkeActiveSAId Integer32,
|
|
rcIkeActiveSALocalIfIndex InterfaceIndex,
|
|
rcIkeActiveSALocalAddrType InetAddressType,
|
|
rcIkeActiveSALocalAddr InetAddress,
|
|
rcIkeActiveSARemoteAddrType InetAddressType,
|
|
rcIkeActiveSARemoteAddr InetAddress,
|
|
rcIkeActiveSAName DisplayString,
|
|
rcIkeActiveSAAuthenticationMethod INTEGER,
|
|
rcIkeActiveSADPDTimeout Unsigned32,
|
|
rcIkeActiveSAHashAlgorithm INTEGER,
|
|
rcIkeActiveSAEncryptionAlgorithm INTEGER,
|
|
rcIkeActiveSAEncryptKeyLen INTEGER,
|
|
rcIkeActiveSADHGroup INTEGER,
|
|
rcIkeActiveSAExchangeMode INTEGER,
|
|
rcIkeActiveSALifetimeSeconds Unsigned32,
|
|
rcIkeActiveSAStatus INTEGER,
|
|
rcIkeActiveSAInitiator INTEGER
|
|
}
|
|
|
|
|
|
|
|
rcIkeActiveSAId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the unique ID of a SA"
|
|
::= { rcIkeActiveSAEntry 1 }
|
|
|
|
|
|
rcIkeActiveSALocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the interface index
|
|
of the local address.
|
|
Only port and vlan if-index are supported
|
|
for this release."
|
|
::= { rcIkeActiveSAEntry 2 }
|
|
|
|
rcIkeActiveSALocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeActiveSALocalAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeActiveSAEntry 3 }
|
|
|
|
rcIkeActiveSALocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the local peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeActiveSALocalAddrType."
|
|
::= { rcIkeActiveSAEntry 4 }
|
|
|
|
rcIkeActiveSARemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeActiveSARemoteAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeActiveSAEntry 5 }
|
|
|
|
rcIkeActiveSARemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the remote peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeActiveSARemoteAddrType."
|
|
::= { rcIkeActiveSAEntry 6 }
|
|
|
|
rcIkeActiveSAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name for the SA."
|
|
::= { rcIkeActiveSAEntry 7 }
|
|
|
|
rcIkeActiveSAAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
preSharedKey(1),
|
|
dssSignatures(2),
|
|
rsaSignatures(3),
|
|
encryptionWithRsa(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
authentication method for the phase 1
|
|
security association.
|
|
Only the Pre-Shared Key authentication
|
|
method is supported in this release."
|
|
DEFVAL { preSharedKey }
|
|
::= { rcIkeActiveSAEntry 8 }
|
|
|
|
rcIkeActiveSADPDTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Dead Peer
|
|
Detection timeout in seconds."
|
|
::= { rcIkeActiveSAEntry 9 }
|
|
|
|
rcIkeActiveSAHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5(1),
|
|
sha(2),
|
|
sha256(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithm
|
|
negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 10 }
|
|
|
|
rcIkeActiveSAEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
desCbc(1),
|
|
tripleDesCbc(5),
|
|
aesCbc(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithm negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 11 }
|
|
|
|
rcIkeActiveSAEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER (128|192|256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
key length negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 12 }
|
|
|
|
rcIkeActiveSADHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
group negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 13 }
|
|
|
|
rcIkeActiveSAExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE Phase 1 SA mode."
|
|
::= { rcIkeActiveSAEntry 14 }
|
|
|
|
rcIkeActiveSALifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE Phase 1 SA remain valid during
|
|
IKE Phase 1 negotiation. A value of 0 means
|
|
no expiration."
|
|
::= { rcIkeActiveSAEntry 15 }
|
|
|
|
rcIkeActiveSAStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE Phase 1 SA remain valid during
|
|
IKE Phase 1 negotiation. A value of 0 means no
|
|
expiration."
|
|
::= { rcIkeActiveSAEntry 16 }
|
|
|
|
rcIkeActiveSAInitiator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initiator (1),
|
|
responder (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the whether the SA was
|
|
created by an Initiator or a Responder"
|
|
::= { rcIkeActiveSAEntry 17 }
|
|
|
|
-- IKE V2 PROFILE TABLE
|
|
rcIkeV2ProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeV2ProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of Ike v2 profiles
|
|
consisting of algorithms and other
|
|
configuration that can be used during an
|
|
IKE connection."
|
|
::= { rcIke 5 }
|
|
|
|
rcIkeV2ProfileEntry OBJECT-TYPE
|
|
SYNTAX RcIkeV2ProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing configuration information
|
|
for authentication algorithms, encryption
|
|
algorithms, Diffie-Helman group, exchange-mode
|
|
and lifetime-seconds to be used for
|
|
negotiation."
|
|
INDEX { rcIkeV2ProfileName }
|
|
::= { rcIkeV2ProfileTable 1 }
|
|
|
|
RcIkeV2ProfileEntry ::= SEQUENCE
|
|
{
|
|
rcIkeV2ProfileName DisplayString,
|
|
rcIkeV2ProfileHashAlgorithm BITS,
|
|
rcIkeV2ProfileEncryptionAlgorithm BITS,
|
|
rcIkeV2ProfileEncryptKeyLen BITS,
|
|
rcIkeV2ProfileDHGroup BITS,
|
|
rcIkeV2ProfileExchangeMode INTEGER,
|
|
rcIkeV2ProfileLifetimeSeconds Unsigned32,
|
|
rcIkeV2ProfileIntegrityAlgorithm BITS,
|
|
rcIkeV2ProfileRowStatus RowStatus
|
|
}
|
|
rcIkeV2ProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains the name of this Profile."
|
|
::= { rcIkeV2ProfileEntry 1 }
|
|
|
|
rcIkeV2ProfileHashAlgorithm OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
md5(0),
|
|
sha(1),
|
|
sha256(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithms
|
|
that can be used during IKE SA
|
|
negotiation.
|
|
It is represented in form of bits as follows-
|
|
bit 0 - md5
|
|
bit 1 - sha
|
|
bit 2 - sha256"
|
|
DEFVAL { {sha256} }
|
|
::= { rcIkeV2ProfileEntry 2 }
|
|
|
|
rcIkeV2ProfileEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
desCbc(0),
|
|
tripleDesCbc(1),
|
|
aesCbc(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithms that can be used during IKE
|
|
SA negotiation.
|
|
It is represented in form of bits as follows-
|
|
bit 0 - desCbc
|
|
bit 1 - tripleDesCbc
|
|
bit 2 - aesCbc"
|
|
DEFVAL { {aesCbc} }
|
|
::= { rcIkeV2ProfileEntry 3 }
|
|
|
|
rcIkeV2ProfileEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
keylen-128(0),
|
|
keylen-192(1),
|
|
keylen-256(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the key length
|
|
that should be be used during IKE
|
|
SA negotiation.
|
|
It is represented in form of bits as follows-
|
|
bit 0 - keylen-128
|
|
bit 1 - keylen-192
|
|
bit 2 - keylen-256"
|
|
DEFVAL { {keylen-256} }
|
|
::= { rcIkeV2ProfileEntry 4 }
|
|
|
|
rcIkeV2ProfileDHGroup OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
modp768(0),
|
|
modp1024(1),
|
|
modp2048(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
groups that can be used during IKE
|
|
SA negotiation.
|
|
It is represented in form of bits as follows -
|
|
bit 0 - modp768
|
|
bit 1 - modp1024
|
|
bit 2 - modp2048"
|
|
DEFVAL { {modp2048} }
|
|
::= { rcIkeV2ProfileEntry 5 }
|
|
|
|
rcIkeV2ProfileExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE
|
|
negotiation mode. Only main mode is
|
|
supported for this release."
|
|
DEFVAL { main }
|
|
::= { rcIkeV2ProfileEntry 6 }
|
|
|
|
rcIkeV2ProfileLifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE SA remain valid during
|
|
IKE negotiation. A value of 0 means no
|
|
expiration."
|
|
DEFVAL { 86400 }
|
|
::= { rcIkeV2ProfileEntry 7 }
|
|
|
|
|
|
rcIkeV2ProfileIntegrityAlgorithm OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
md5 (0),
|
|
sha1 (1),
|
|
sha256 (2),
|
|
aes-xcbc(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the integrity algorithms
|
|
that can be used during IKE SA
|
|
negotiation.
|
|
It is represented in form of bits as follows -
|
|
bit 0 - md5
|
|
bit 1 - sha1
|
|
bit 2 - sha256
|
|
bit 3 - aes-xcbc"
|
|
DEFVAL { {sha256} }
|
|
::= { rcIkeV2ProfileEntry 8 }
|
|
|
|
rcIkeV2ProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to create or delete
|
|
entries in this table."
|
|
::= { rcIkeV2ProfileEntry 9 }
|
|
|
|
-- IKE V2 SA TABLE
|
|
rcIkeV2SATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeV2SAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of IKE V2
|
|
Security Association entries."
|
|
::= { rcIke 6 }
|
|
|
|
rcIkeV2SAEntry OBJECT-TYPE
|
|
SYNTAX RcIkeV2SAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { rcIkeV2SAId,
|
|
rcIkeV2SALocalIfIndex,
|
|
rcIkeV2SALocalAddrType,
|
|
rcIkeV2SALocalAddr,
|
|
rcIkeV2SARemoteAddrType,
|
|
rcIkeV2SARemoteAddr
|
|
}
|
|
::= { rcIkeV2SATable 1 }
|
|
|
|
RcIkeV2SAEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkeV2SAId Integer32,
|
|
rcIkeV2SALocalIfIndex InterfaceIndex,
|
|
rcIkeV2SALocalAddrType InetAddressType,
|
|
rcIkeV2SALocalAddr InetAddress,
|
|
rcIkeV2SARemoteAddrType InetAddressType,
|
|
rcIkeV2SARemoteAddr InetAddress,
|
|
rcIkeV2SAName DisplayString,
|
|
rcIkeV2SAAuthenticationMethod INTEGER,
|
|
rcIkeV2SADPDTimeout Unsigned32,
|
|
rcIkeV2SAHashAlgorithm INTEGER,
|
|
rcIkeV2SAEncryptionAlgorithm INTEGER,
|
|
rcIkeV2SAEncryptKeyLen INTEGER,
|
|
rcIkeV2SADHGroup INTEGER,
|
|
rcIkeV2SAExchangeMode INTEGER,
|
|
rcIkeV2SALifetimeSeconds Unsigned32,
|
|
rcIkeV2SAStatus INTEGER,
|
|
rcIkeV2SAInitiator INTEGER,
|
|
rcIkeV2SAIntegrityAlgorithm INTEGER
|
|
}
|
|
|
|
rcIkeV2SAId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the unique ID of a SA"
|
|
::= { rcIkeV2SAEntry 1 }
|
|
|
|
rcIkeV2SALocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the interface index
|
|
of the local address.
|
|
Only port and vlan if-index are supported
|
|
for this release."
|
|
::= { rcIkeV2SAEntry 2 }
|
|
|
|
rcIkeV2SALocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeActiveSALocalAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeV2SAEntry 3 }
|
|
|
|
rcIkeV2SALocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the local peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeV2SALocalAddrType."
|
|
::= { rcIkeV2SAEntry 4 }
|
|
|
|
rcIkeV2SARemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeV2SARemoteAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeV2SAEntry 5 }
|
|
|
|
rcIkeV2SARemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the remote peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeV2SARemoteAddrType."
|
|
::= { rcIkeV2SAEntry 6 }
|
|
|
|
rcIkeV2SAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name for the SA."
|
|
::= { rcIkeV2SAEntry 7 }
|
|
|
|
rcIkeV2SAAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
preSharedKey(1),
|
|
dssSignatures(2),
|
|
rsaSignatures(3),
|
|
encryptionWithRsa(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
authentication method for the phase 1
|
|
security association.
|
|
Only the Pre-Shared Key authentication
|
|
method is supported in this release."
|
|
DEFVAL { preSharedKey }
|
|
::= { rcIkeV2SAEntry 8 }
|
|
|
|
rcIkeV2SADPDTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Dead Peer
|
|
Detection timeout in seconds."
|
|
::= { rcIkeV2SAEntry 9 }
|
|
|
|
rcIkeV2SAHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5(1),
|
|
sha(2),
|
|
sha256(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithm
|
|
negotiated for this IKEv2 SA."
|
|
::= { rcIkeV2SAEntry 10 }
|
|
|
|
rcIkeV2SAEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
desCbc(2),
|
|
tripleDesCbc(3),
|
|
aesCbc(12)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithm negotiated for this IKEv2 SA."
|
|
::= { rcIkeV2SAEntry 11 }
|
|
|
|
rcIkeV2SAEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER (128|192|256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
key length negotiated for this IKE V2 SA."
|
|
::= { rcIkeV2SAEntry 12 }
|
|
|
|
rcIkeV2SADHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
group negotiated for this IKE V2 SA."
|
|
::= { rcIkeV2SAEntry 13 }
|
|
|
|
rcIkeV2SAExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE V2 SA mode."
|
|
::= { rcIkeV2SAEntry 14 }
|
|
|
|
rcIkeV2SALifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE V2 SA remain valid during
|
|
IKE negotiation. A value of 0 means
|
|
no expiration."
|
|
::= { rcIkeV2SAEntry 15 }
|
|
|
|
rcIkeV2SAStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE V2 SA remain valid during
|
|
IKE V2 negotiation. A value of 0 means no
|
|
expiration."
|
|
::= { rcIkeV2SAEntry 16 }
|
|
|
|
rcIkeV2SAInitiator OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
initiator (1),
|
|
responder (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the whether the SA was
|
|
created by an Initiator or a Responder"
|
|
::= { rcIkeV2SAEntry 17 }
|
|
|
|
|
|
rcIkeV2SAIntegrityAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5 (1),
|
|
sha1 (2),
|
|
sha256 (12),
|
|
aes-xcbc (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the integrity algorithms
|
|
that can be used during IKEv2 SA
|
|
negotiation."
|
|
::= { rcIkeV2SAEntry 18 } EnableValue,
|
|
rcIkePolicyOperStatus INTEGER,
|
|
rcIkePolicyRowStatus RowStatus,
|
|
rcIkePolicyRevocationCheckMethod INTEGER,
|
|
rcIkePolicyProfileVersion INTEGER,
|
|
rcIkePolicyPeerName DisplayString
|
|
}
|
|
|
|
rcIkePolicyLocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Interface Index
|
|
of the local address.
|
|
Only port and vlan if-index are supported
|
|
for this release."
|
|
::= { rcIkePolicyEntry 1 }
|
|
|
|
rcIkePolicyLocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkePolicyLocalAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkePolicyEntry 2 }
|
|
rcIkePolicyLocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string
|
|
representation of the local peer ID.
|
|
The type of value configured for this
|
|
object is specified by the
|
|
rcIkePolicyLocalAddrType."
|
|
::= { rcIkePolicyEntry 3 }
|
|
|
|
rcIkePolicyRemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkePolicyRemoteAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkePolicyEntry 4 }
|
|
|
|
rcIkePolicyRemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string
|
|
representation of the remote peer ID.
|
|
The type of value configured for this
|
|
object is specified by the
|
|
rcIkePolicyRemoteAddrType."
|
|
::= { rcIkePolicyEntry 5 }
|
|
|
|
rcIkePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name given to the policy.
|
|
The name should be assigned during creation of
|
|
the policy. Changing the name after the policy
|
|
is created is not allowed."
|
|
::= { rcIkePolicyEntry 6 }
|
|
rcIkePolicyProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name of the profile
|
|
(rcIkeProfileName) that should be used for
|
|
this policy."
|
|
::= { rcIkePolicyEntry 7 }
|
|
|
|
rcIkePolicyAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
preSharedKey(1),
|
|
dssSignatures(2),
|
|
rsaSignatures(3),
|
|
encryptionWithRsa(4),
|
|
digitalCertificate(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
authentication method for the phase 1
|
|
security association.
|
|
Only the Pre-Shared Key authentication
|
|
method is supported in this release."
|
|
DEFVAL { preSharedKey }
|
|
::= { rcIkePolicyEntry 8 }
|
|
|
|
rcIkePolicyPSKValue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the value of the
|
|
Pre-Shared Key if the authentication method
|
|
is set to PSK."
|
|
::= { rcIkePolicyEntry 9 }
|
|
|
|
rcIkePolicyDPDTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Dead Peer
|
|
Detection timeout in seconds."
|
|
DEFVAL { 300 }
|
|
::= { rcIkePolicyEntry 10 }
|
|
rcIkePolicyP2PFS OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether or not perfect
|
|
forward secrecy is used when refreshing keys.
|
|
Enable indicates that PFS SHOULD be used."
|
|
DEFVAL { disable }
|
|
::= { rcIkePolicyEntry 11 }
|
|
|
|
rcIkePolicyP2PfsUseIkeGroup OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether or not to use
|
|
the same GroupId (Diffie-Hellman Group) for
|
|
phase 2 as was used in phase 1. If P2PFS is
|
|
disabled, this entry SHOULD be ignored."
|
|
DEFVAL { enable }
|
|
::= { rcIkePolicyEntry 12 }
|
|
|
|
rcIkePolicyP2PfsDHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman group
|
|
to use for phase 2 when the object
|
|
rcIkePolicyP2PFS is enabled and the object
|
|
rcIkePolicyP2PfsUseIkeGroup is disabled."
|
|
DEFVAL { modp1024 }
|
|
::= { rcIkePolicyEntry 13 }
|
|
|
|
|
|
rcIkePolicyAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether the policy
|
|
is administratively enabled or disabled."
|
|
DEFVAL { disable }
|
|
::= { rcIkePolicyEntry 14 }
|
|
|
|
rcIkePolicyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether the policy
|
|
is operationally up or down."
|
|
::= { rcIkePolicyEntry 15 }
|
|
|
|
rcIkePolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to create or delete
|
|
entries in this table."
|
|
::= { rcIkePolicyEntry 16 }
|
|
|
|
rcIkePolicyRevocationCheckMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
crl(1),
|
|
ocsp(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
revocation-check method for digital-certificate
|
|
type authentication-method."
|
|
DEFVAL { crl }
|
|
::= { rcIkePolicyEntry 17 }
|
|
|
|
rcIkePolicyProfileVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
v1(1),
|
|
v2(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object maps to the version
|
|
of ike profile selected. Default value of
|
|
this object is version 1 (v1)"
|
|
DEFVAL {v1}
|
|
::= { rcIkePolicyEntry 18 }
|
|
|
|
rcIkePolicyPeerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the value of the
|
|
Peer name if the authentication method
|
|
is set to digital certificate."
|
|
::= { rcIkePolicyEntry 19 }
|
|
|
|
-- IKE ACTIVE SA TABLE
|
|
|
|
rcIkeActiveSATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeActiveSAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of IKE Phase 1
|
|
Security Association entries."
|
|
::= { rcIke 4 }
|
|
|
|
rcIkeActiveSAEntry OBJECT-TYPE
|
|
SYNTAX RcIkeActiveSAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { rcIkeActiveSAId,
|
|
rcIkeActiveSALocalIfIndex,
|
|
rcIkeActiveSALocalAddrType,
|
|
rcIkeActiveSALocalAddr,
|
|
rcIkeActiveSARemoteAddrType,
|
|
rcIkeActiveSARemoteAddr
|
|
}
|
|
::= { rcIkeActiveSATable 1 }
|
|
|
|
RcIkeActiveSAEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkeActiveSAId Integer32,
|
|
rcIkeActiveSALocalIfIndex InterfaceIndex,
|
|
rcIkeActiveSALocalAddrType InetAddressType,
|
|
rcIkeActiveSALocalAddr InetAddress,
|
|
rcIkeActiveSARemoteAddrType InetAddressType,
|
|
rcIkeActiveSARemoteAddr InetAddress,
|
|
rcIkeActiveSAName DisplayString,
|
|
rcIkeActiveSAAuthenticationMethod INTEGER,
|
|
rcIkeActiveSADPDTimeout Unsigned32,
|
|
rcIkeActiveSAHashAlgorithm INTEGER,
|
|
rcIkeActiveSAEncryptionAlgorithm INTEGER,
|
|
rcIkeActiveSAEncryptKeyLen INTEGER,
|
|
rcIkeActiveSADHGroup INTEGER,
|
|
rcIkeActiveSAExchangeMode INTEGER,
|
|
rcIkeActiveSALifetimeSeconds Unsigned32,
|
|
rcIkeActiveSAStatus INTEGER,
|
|
rcIkeActiveSAInitiator INTEGER
|
|
}
|
|
|
|
|
|
|
|
rcIkeActiveSAId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the unique ID of a SA"
|
|
::= { rcIkeActiveSAEntry 1 }
|
|
|
|
|
|
rcIkeActiveSALocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the interface index
|
|
of the local address.
|
|
Only port and vlan if-index are supported
|
|
for this release."
|
|
::= { rcIkeActiveSAEntry 2 }
|
|
|
|
rcIkeActiveSALocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeActiveSALocalAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeActiveSAEntry 3 }
|
|
|
|
rcIkeActiveSALocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the local peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeActiveSALocalAddrType."
|
|
::= { rcIkeActiveSAEntry 4 }
|
|
|
|
rcIkeActiveSARemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeActiveSARemoteAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeActiveSAEntry 5 }
|
|
|
|
rcIkeActiveSARemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the remote peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeActiveSARemoteAddrType."
|
|
::= { rcIkeActiveSAEntry 6 }
|
|
|
|
rcIkeActiveSAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name for the SA."
|
|
::= { rcIkeActiveSAEntry 7 }
|
|
|
|
rcIkeActiveSAAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
preSharedKey(1),
|
|
dssSignatures(2),
|
|
rsaSignatures(3),
|
|
encryptionWithRsa(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
authentication method for the phase 1
|
|
security association.
|
|
Only the Pre-Shared Key authentication
|
|
method is supported in this release."
|
|
DEFVAL { preSharedKey }
|
|
::= { rcIkeActiveSAEntry 8 }
|
|
|
|
rcIkeActiveSADPDTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Dead Peer
|
|
Detection timeout in seconds."
|
|
::= { rcIkeActiveSAEntry 9 }
|
|
|
|
rcIkeActiveSAHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5(1),
|
|
sha(2),
|
|
sha256(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithm
|
|
negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 10 }
|
|
|
|
rcIkeActiveSAEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
desCbc(1),
|
|
tripleDesCbc(5),
|
|
aesCbc(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithm negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 11 }
|
|
|
|
rcIkeActiveSAEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER (128|192|256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
key length negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 12 }
|
|
|
|
rcIkeActiveSADHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
group negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 13 }
|
|
|
|
rcIkeActiveSAExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE Phase 1 SA mode."
|
|
::= { rcIkeActiveSAEntry 14 }
|
|
|
|
rcIkeActiveSALifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE Phase 1 SA remain valid during
|
|
IKE Phase 1 negotiation. A value of 0 means
|
|
no expiration."
|
|
::= { rcIkeActiveSAEntry 15 }
|
|
|
|
rcIkeActiveSAStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE Phase 1 SA remain valid during
|
|
IKE Phase 1 negotiation. A value of 0 means no
|
|
expiration."
|
|
::= { rcIkeActiveSAEntry 16 }
|
|
|
|
rcIkeActiveSAInitiator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initiator (1),
|
|
responder (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the whether the SA was
|
|
created by an Initiator or a Responder"
|
|
::= { rcIkeActiveSAEntry 17 }
|
|
|
|
-- IKE V2 PROFILE TABLE
|
|
rcIkeV2ProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeV2ProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of Ike v2 profiles
|
|
consisting of algorithms and other
|
|
configuration that can be used during an
|
|
IKE connection."
|
|
::= { rcIke 5 }
|
|
|
|
rcIkeV2ProfileEntry OBJECT-TYPE
|
|
SYNTAX RcIkeV2ProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing configuration information
|
|
for authentication algorithms, encryption
|
|
algorithms, Diffie-Helman group, exchange-mode
|
|
and lifetime-seconds to be used for
|
|
negotiation."
|
|
INDEX { rcIkeV2ProfileName }
|
|
::= { rcIkeV2ProfileTable 1 }
|
|
|
|
RcIkeV2ProfileEntry ::= SEQUENCE
|
|
{
|
|
rcIkeV2ProfileName DisplayString,
|
|
rcIkeV2ProfileHashAlgorithm BITS,
|
|
rcIkeV2ProfileEncryptionAlgorithm BITS,
|
|
rcIkeV2ProfileEncryptKeyLen BITS,
|
|
rcIkeV2ProfileDHGroup BITS,
|
|
rcIkeV2ProfileExchangeMode INTEGER,
|
|
rcIkeV2ProfileLifetimeSeconds Unsigned32,
|
|
rcIkeV2ProfileIntegrityAlgorithm BITS,
|
|
rcIkeV2ProfileRowStatus RowStatus
|
|
}
|
|
rcIkeV2ProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains the name of this Profile."
|
|
::= { rcIkeV2ProfileEntry 1 }
|
|
|
|
rcIkeV2ProfileHashAlgorithm OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
md5(0),
|
|
sha(1),
|
|
sha256(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithms
|
|
that can be used during IKE SA
|
|
negotiation.
|
|
It is represented in form of bits as follows-
|
|
bit 0 - md5
|
|
bit 1 - sha
|
|
bit 2 - sha256"
|
|
DEFVAL { {sha256} }
|
|
::= { rcIkeV2ProfileEntry 2 }
|
|
|
|
rcIkeV2ProfileEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
desCbc(0),
|
|
tripleDesCbc(1),
|
|
aesCbc(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithms that can be used during IKE
|
|
SA negotiation.
|
|
It is represented in form of bits as follows-
|
|
bit 0 - desCbc
|
|
bit 1 - tripleDesCbc
|
|
bit 2 - aesCbc"
|
|
DEFVAL { {aesCbc} }
|
|
::= { rcIkeV2ProfileEntry 3 }
|
|
|
|
rcIkeV2ProfileEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
keylen-128(0),
|
|
keylen-192(1),
|
|
keylen-256(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the key length
|
|
that should be be used during IKE
|
|
SA negotiation.
|
|
It is represented in form of bits as follows-
|
|
bit 0 - keylen-128
|
|
bit 1 - keylen-192
|
|
bit 2 - keylen-256"
|
|
DEFVAL { {keylen-256} }
|
|
::= { rcIkeV2ProfileEntry 4 }
|
|
|
|
rcIkeV2ProfileDHGroup OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
modp768(0),
|
|
modp1024(1),
|
|
modp2048(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
groups that can be used during IKE
|
|
SA negotiation.
|
|
It is represented in form of bits as follows -
|
|
bit 0 - modp768
|
|
bit 1 - modp1024
|
|
bit 2 - modp2048"
|
|
DEFVAL { {modp2048} }
|
|
::= { rcIkeV2ProfileEntry 5 }
|
|
|
|
rcIkeV2ProfileExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE
|
|
negotiation mode. Only main mode is
|
|
supported for this release."
|
|
DEFVAL { main }
|
|
::= { rcIkeV2ProfileEntry 6 }
|
|
|
|
rcIkeV2ProfileLifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE SA remain valid during
|
|
IKE negotiation. A value of 0 means no
|
|
expiration."
|
|
DEFVAL { 86400 }
|
|
::= { rcIkeV2ProfileEntry 7 }
|
|
|
|
|
|
rcIkeV2ProfileIntegrityAlgorithm OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
md5 (0),
|
|
sha1 (1),
|
|
sha256 (2),
|
|
aes-xcbc(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the integrity algorithms
|
|
that can be used during IKE SA
|
|
negotiation.
|
|
It is represented in form of bits as follows -
|
|
bit 0 - md5
|
|
bit 1 - sha1
|
|
bit 2 - sha256
|
|
bit 3 - aes-xcbc"
|
|
DEFVAL { {sha256} }
|
|
::= { rcIkeV2ProfileEntry 8 }
|
|
|
|
rcIkeV2ProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to create or delete
|
|
entries in this table."
|
|
::= { rcIkeV2ProfileEntry 9 }
|
|
|
|
-- IKE V2 SA TABLE
|
|
rcIkeV2SATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeV2SAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of IKE V2
|
|
Security Association entries."
|
|
::= { rcIke 6 }
|
|
|
|
rcIkeV2SAEntry OBJECT-TYPE
|
|
SYNTAX RcIkeV2SAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { rcIkeV2SAId,
|
|
rcIkeV2SALocalIfIndex,
|
|
rcIkeV2SALocalAddrType,
|
|
rcIkeV2SALocalAddr,
|
|
rcIkeV2SARemoteAddrType,
|
|
rcIkeV2SARemoteAddr
|
|
}
|
|
::= { rcIkeV2SATable 1 }
|
|
|
|
RcIkeV2SAEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkeV2SAId Integer32,
|
|
rcIkeV2SALocalIfIndex InterfaceIndex,
|
|
rcIkeV2SALocalAddrType InetAddressType,
|
|
rcIkeV2SALocalAddr InetAddress,
|
|
rcIkeV2SARemoteAddrType InetAddressType,
|
|
rcIkeV2SARemoteAddr InetAddress,
|
|
rcIkeV2SAName DisplayString,
|
|
rcIkeV2SAAuthenticationMethod INTEGER,
|
|
rcIkeV2SADPDTimeout Unsigned32,
|
|
rcIkeV2SAHashAlgorithm INTEGER,
|
|
rcIkeV2SAEncryptionAlgorithm INTEGER,
|
|
rcIkeV2SAEncryptKeyLen INTEGER,
|
|
rcIkeV2SADHGroup INTEGER,
|
|
rcIkeV2SAExchangeMode INTEGER,
|
|
rcIkeV2SALifetimeSeconds Unsigned32,
|
|
rcIkeV2SAStatus INTEGER,
|
|
rcIkeV2SAInitiator INTEGER,
|
|
rcIkeV2SAIntegrityAlgorithm INTEGER
|
|
}
|
|
|
|
rcIkeV2SAId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the unique ID of a SA"
|
|
::= { rcIkeV2SAEntry 1 }
|
|
|
|
rcIkeV2SALocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the interface index
|
|
of the local address.
|
|
Only port and vlan if-index are supported
|
|
for this release."
|
|
::= { rcIkeV2SAEntry 2 }
|
|
|
|
rcIkeV2SALocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeActiveSALocalAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeV2SAEntry 3 }
|
|
|
|
rcIkeV2SALocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the local peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeV2SALocalAddrType."
|
|
::= { rcIkeV2SAEntry 4 }
|
|
|
|
rcIkeV2SARemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeV2SARemoteAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeV2SAEntry 5 }
|
|
|
|
rcIkeV2SARemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the remote peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeV2SARemoteAddrType."
|
|
::= { rcIkeV2SAEntry 6 }
|
|
|
|
rcIkeV2SAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name for the SA."
|
|
::= { rcIkeV2SAEntry 7 }
|
|
|
|
rcIkeV2SAAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
preSharedKey(1),
|
|
dssSignatures(2),
|
|
rsaSignatures(3),
|
|
encryptionWithRsa(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
authentication method for the phase 1
|
|
security association.
|
|
Only the Pre-Shared Key authentication
|
|
method is supported in this release."
|
|
DEFVAL { preSharedKey }
|
|
::= { rcIkeV2SAEntry 8 }
|
|
|
|
rcIkeV2SADPDTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Dead Peer
|
|
Detection timeout in seconds."
|
|
::= { rcIkeV2SAEntry 9 }
|
|
|
|
rcIkeV2SAHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5(1),
|
|
sha(2),
|
|
sha256(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithm
|
|
negotiated for this IKEv2 SA."
|
|
::= { rcIkeV2SAEntry 10 }
|
|
|
|
rcIkeV2SAEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
desCbc(2),
|
|
tripleDesCbc(3),
|
|
aesCbc(12)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithm negotiated for this IKEv2 SA."
|
|
::= { rcIkeV2SAEntry 11 }
|
|
|
|
rcIkeV2SAEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER (128|192|256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
key length negotiated for this IKE V2 SA."
|
|
::= { rcIkeV2SAEntry 12 }
|
|
|
|
rcIkeV2SADHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
group negotiated for this IKE V2 SA."
|
|
::= { rcIkeV2SAEntry 13 }
|
|
|
|
rcIkeV2SAExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE V2 SA mode."
|
|
::= { rcIkeV2SAEntry 14 }
|
|
|
|
rcIkeV2SALifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE V2 SA remain valid during
|
|
IKE negotiation. A value of 0 means
|
|
no expiration."
|
|
::= { rcIkeV2SAEntry 15 }
|
|
|
|
rcIkeV2SAStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE V2 SA remain valid during
|
|
IKE V2 negotiation. A value of 0 means no
|
|
expiration."
|
|
::= { rcIkeV2SAEntry 16 }
|
|
|
|
rcIkeV2SAInitiator OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
initiator (1),
|
|
responder (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the whether the SA was
|
|
created by an Initiator or a Responder"
|
|
::= { rcIkeV2SAEntry 17 }
|
|
|
|
|
|
rcIkeV2SAIntegrityAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5 (1),
|
|
sha1 (2),
|
|
sha256 (12),
|
|
aes-xcbc (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the integrity algorithms
|
|
that can be used during IKEv2 SA
|
|
negotiation."
|
|
::= { rcIkeV2SAEntry 18 }
|
|
|
|
--
|
|
-- IKE Profile Table
|
|
--
|
|
rcIkeProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of profiles
|
|
consisting of algorithms and other
|
|
configuration that can be used during an
|
|
IKE Phase 1 connection."
|
|
::= { rcIke 1 }
|
|
|
|
rcIkeProfileEntry OBJECT-TYPE
|
|
SYNTAX RcIkeProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing configuration information
|
|
for authentication algorithms, encryption
|
|
algorithms, Diffie-Helman group, exchange-mode
|
|
and lifetime-seconds to be used for a Phase 1
|
|
negotiation."
|
|
INDEX { rcIkeProfileName }
|
|
::= { rcIkeProfileTable 1 }
|
|
|
|
RcIkeProfileEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkeProfileName DisplayString,
|
|
rcIkeProfileHashAlgorithm INTEGER,
|
|
rcIkeProfileEncryptionAlgorithm INTEGER,
|
|
rcIkeProfileEncryptKeyLen INTEGER,
|
|
rcIkeProfileDHGroup INTEGER,
|
|
rcIkeProfileExchangeMode INTEGER,
|
|
rcIkeProfileLifetimeSeconds Unsigned32,
|
|
rcIkeProfileRowStatus RowStatus
|
|
}
|
|
rcIkeProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains the name of this Profile."
|
|
::= { rcIkeProfileEntry 1 }
|
|
|
|
rcIkeProfileHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5(1),
|
|
sha(2),
|
|
sha256(4),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithms
|
|
that can be used during IKE Phase 1 SA
|
|
negotiation."
|
|
DEFVAL { sha256 }
|
|
::= { rcIkeProfileEntry 2 }
|
|
|
|
rcIkeProfileEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
desCbc(1),
|
|
tripleDesCbc(5),
|
|
aesCbc(7),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithms that can be used during IKE
|
|
Phase 1 SA negotiation."
|
|
DEFVAL { aesCbc }
|
|
::= { rcIkeProfileEntry 3 }
|
|
rcIkeProfileEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER (128|192|256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the key length
|
|
that should be be used during IKE
|
|
Phase 1 SA negotiation."
|
|
DEFVAL { 256 }
|
|
::= { rcIkeProfileEntry 4 }
|
|
|
|
rcIkeProfileDHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
groups that can be used during IKE Phase 1
|
|
SA negotiation."
|
|
DEFVAL { modp2048 }
|
|
::= { rcIkeProfileEntry 5 }
|
|
|
|
rcIkeProfileExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE Phase 1
|
|
negotiation mode. Only main mode is
|
|
supported for this release."
|
|
DEFVAL { main }
|
|
::= { rcIkeProfileEntry 6 }
|
|
rcIkeProfileLifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE Phase 1 SA remain valid during
|
|
IKE Phase 1 negotiation. A value of 0 means no
|
|
expiration."
|
|
DEFVAL { 86400 }
|
|
::= { rcIkeProfileEntry 7 }
|
|
|
|
rcIkeProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to create or delete
|
|
entries in this table."
|
|
::= { rcIkeProfileEntry 8 }
|
|
|
|
--
|
|
-- IKE Policy Table
|
|
--
|
|
|
|
rcIkePolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of IKE Phase 1
|
|
policy entries."
|
|
::= { rcIke 2 }
|
|
|
|
rcIkePolicyEntry OBJECT-TYPE
|
|
SYNTAX RcIkePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { rcIkePolicyLocalIfIndex,
|
|
rcIkePolicyLocalAddrType,
|
|
rcIkePolicyLocalAddr,
|
|
rcIkePolicyRemoteAddrType,
|
|
rcIkePolicyRemoteAddr
|
|
}
|
|
::= { rcIkePolicyTable 1 }
|
|
RcIkePolicyEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkePolicyLocalIfIndex InterfaceIndex,
|
|
rcIkePolicyLocalAddrType InetAddressType,
|
|
rcIkePolicyLocalAddr InetAddress,
|
|
rcIkePolicyRemoteAddrType InetAddressType,
|
|
rcIkePolicyRemoteAddr InetAddress,
|
|
rcIkePolicyName DisplayString,
|
|
rcIkePolicyProfileName DisplayString,
|
|
rcIkePolicyAuthenticationMethod INTEGER,
|
|
rcIkePolicyPSKValue DisplayString,
|
|
rcIkePolicyDPDTimeout Unsigned32,
|
|
rcIkePolicyP2PFS EnableValue,
|
|
rcIkePolicyP2PfsUseIkeGroup EnableValue,
|
|
rcIkePolicyP2PfsDHGroup INTEGER,
|
|
rcIkePolicyAdminState EnableValue,
|
|
rcIkePolicyOperStatus INTEGER,
|
|
rcIkePolicyRowStatus RowStatus,
|
|
rcIkePolicyRevocationCheckMethod INTEGER,
|
|
rcIkePolicyProfileVersion INTEGER,
|
|
rcIkePolicyPeerName DisplayString
|
|
}
|
|
|
|
rcIkePolicyLocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Interface Index
|
|
of the local address.
|
|
Only port and vlan if-index are supported
|
|
for this release."
|
|
::= { rcIkePolicyEntry 1 }
|
|
|
|
rcIkePolicyLocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkePolicyLocalAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkePolicyEntry 2 }
|
|
rcIkePolicyLocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string
|
|
representation of the local peer ID.
|
|
The type of value configured for this
|
|
object is specified by the
|
|
rcIkePolicyLocalAddrType."
|
|
::= { rcIkePolicyEntry 3 }
|
|
|
|
rcIkePolicyRemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkePolicyRemoteAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkePolicyEntry 4 }
|
|
|
|
rcIkePolicyRemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string
|
|
representation of the remote peer ID.
|
|
The type of value configured for this
|
|
object is specified by the
|
|
rcIkePolicyRemoteAddrType."
|
|
::= { rcIkePolicyEntry 5 }
|
|
|
|
rcIkePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name given to the policy.
|
|
The name should be assigned during creation of
|
|
the policy. Changing the name after the policy
|
|
is created is not allowed."
|
|
::= { rcIkePolicyEntry 6 }
|
|
rcIkePolicyProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name of the profile
|
|
(rcIkeProfileName) that should be used for
|
|
this policy."
|
|
::= { rcIkePolicyEntry 7 }
|
|
|
|
rcIkePolicyAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
preSharedKey(1),
|
|
dssSignatures(2),
|
|
rsaSignatures(3),
|
|
encryptionWithRsa(4),
|
|
digitalCertificate(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
authentication method for the phase 1
|
|
security association.
|
|
Only the Pre-Shared Key authentication
|
|
method is supported in this release."
|
|
DEFVAL { preSharedKey }
|
|
::= { rcIkePolicyEntry 8 }
|
|
|
|
rcIkePolicyPSKValue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the value of the
|
|
Pre-Shared Key if the authentication method
|
|
is set to PSK."
|
|
::= { rcIkePolicyEntry 9 }
|
|
|
|
rcIkePolicyDPDTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Dead Peer
|
|
Detection timeout in seconds."
|
|
DEFVAL { 300 }
|
|
::= { rcIkePolicyEntry 10 }
|
|
rcIkePolicyP2PFS OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether or not perfect
|
|
forward secrecy is used when refreshing keys.
|
|
Enable indicates that PFS SHOULD be used."
|
|
DEFVAL { disable }
|
|
::= { rcIkePolicyEntry 11 }
|
|
|
|
rcIkePolicyP2PfsUseIkeGroup OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether or not to use
|
|
the same GroupId (Diffie-Hellman Group) for
|
|
phase 2 as was used in phase 1. If P2PFS is
|
|
disabled, this entry SHOULD be ignored."
|
|
DEFVAL { enable }
|
|
::= { rcIkePolicyEntry 12 }
|
|
|
|
rcIkePolicyP2PfsDHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman group
|
|
to use for phase 2 when the object
|
|
rcIkePolicyP2PFS is enabled and the object
|
|
rcIkePolicyP2PfsUseIkeGroup is disabled."
|
|
DEFVAL { modp1024 }
|
|
::= { rcIkePolicyEntry 13 }
|
|
|
|
|
|
rcIkePolicyAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether the policy
|
|
is administratively enabled or disabled."
|
|
DEFVAL { disable }
|
|
::= { rcIkePolicyEntry 14 }
|
|
|
|
rcIkePolicyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies whether the policy
|
|
is operationally up or down."
|
|
::= { rcIkePolicyEntry 15 }
|
|
|
|
rcIkePolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to create or delete
|
|
entries in this table."
|
|
::= { rcIkePolicyEntry 16 }
|
|
|
|
rcIkePolicyRevocationCheckMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
crl(1),
|
|
ocsp(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
revocation-check method for digital-certificate
|
|
type authentication-method."
|
|
DEFVAL { crl }
|
|
::= { rcIkePolicyEntry 17 }
|
|
|
|
rcIkePolicyProfileVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
v1(1),
|
|
v2(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object maps to the version
|
|
of ike profile selected. Default value of
|
|
this object is version 1 (v1)"
|
|
DEFVAL {v1}
|
|
::= { rcIkePolicyEntry 18 }
|
|
|
|
rcIkePolicyPeerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the value of the
|
|
Peer name if the authentication method
|
|
is set to digital certificate."
|
|
::= { rcIkePolicyEntry 19 }
|
|
|
|
-- IKE ACTIVE SA TABLE
|
|
|
|
rcIkeActiveSATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeActiveSAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of IKE Phase 1
|
|
Security Association entries."
|
|
::= { rcIke 4 }
|
|
|
|
rcIkeActiveSAEntry OBJECT-TYPE
|
|
SYNTAX RcIkeActiveSAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { rcIkeActiveSAId,
|
|
rcIkeActiveSALocalIfIndex,
|
|
rcIkeActiveSALocalAddrType,
|
|
rcIkeActiveSALocalAddr,
|
|
rcIkeActiveSARemoteAddrType,
|
|
rcIkeActiveSARemoteAddr
|
|
}
|
|
::= { rcIkeActiveSATable 1 }
|
|
|
|
RcIkeActiveSAEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkeActiveSAId Integer32,
|
|
rcIkeActiveSALocalIfIndex InterfaceIndex,
|
|
rcIkeActiveSALocalAddrType InetAddressType,
|
|
rcIkeActiveSALocalAddr InetAddress,
|
|
rcIkeActiveSARemoteAddrType InetAddressType,
|
|
rcIkeActiveSARemoteAddr InetAddress,
|
|
rcIkeActiveSAName DisplayString,
|
|
rcIkeActiveSAAuthenticationMethod INTEGER,
|
|
rcIkeActiveSADPDTimeout Unsigned32,
|
|
rcIkeActiveSAHashAlgorithm INTEGER,
|
|
rcIkeActiveSAEncryptionAlgorithm INTEGER,
|
|
rcIkeActiveSAEncryptKeyLen INTEGER,
|
|
rcIkeActiveSADHGroup INTEGER,
|
|
rcIkeActiveSAExchangeMode INTEGER,
|
|
rcIkeActiveSALifetimeSeconds Unsigned32,
|
|
rcIkeActiveSAStatus INTEGER,
|
|
rcIkeActiveSAInitiator INTEGER
|
|
}
|
|
|
|
|
|
|
|
rcIkeActiveSAId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the unique ID of a SA"
|
|
::= { rcIkeActiveSAEntry 1 }
|
|
|
|
|
|
rcIkeActiveSALocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the interface index
|
|
of the local address.
|
|
Only port and vlan if-index are supported
|
|
for this release."
|
|
::= { rcIkeActiveSAEntry 2 }
|
|
|
|
rcIkeActiveSALocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeActiveSALocalAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeActiveSAEntry 3 }
|
|
|
|
rcIkeActiveSALocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the local peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeActiveSALocalAddrType."
|
|
::= { rcIkeActiveSAEntry 4 }
|
|
|
|
rcIkeActiveSARemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeActiveSARemoteAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeActiveSAEntry 5 }
|
|
|
|
rcIkeActiveSARemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the remote peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeActiveSARemoteAddrType."
|
|
::= { rcIkeActiveSAEntry 6 }
|
|
|
|
rcIkeActiveSAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name for the SA."
|
|
::= { rcIkeActiveSAEntry 7 }
|
|
|
|
rcIkeActiveSAAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
preSharedKey(1),
|
|
dssSignatures(2),
|
|
rsaSignatures(3),
|
|
encryptionWithRsa(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
authentication method for the phase 1
|
|
security association.
|
|
Only the Pre-Shared Key authentication
|
|
method is supported in this release."
|
|
DEFVAL { preSharedKey }
|
|
::= { rcIkeActiveSAEntry 8 }
|
|
|
|
rcIkeActiveSADPDTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Dead Peer
|
|
Detection timeout in seconds."
|
|
::= { rcIkeActiveSAEntry 9 }
|
|
|
|
rcIkeActiveSAHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5(1),
|
|
sha(2),
|
|
sha256(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithm
|
|
negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 10 }
|
|
|
|
rcIkeActiveSAEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
desCbc(1),
|
|
tripleDesCbc(5),
|
|
aesCbc(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithm negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 11 }
|
|
|
|
rcIkeActiveSAEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER (128|192|256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
key length negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 12 }
|
|
|
|
rcIkeActiveSADHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
group negotiated for this IKE Phase 1 SA."
|
|
::= { rcIkeActiveSAEntry 13 }
|
|
|
|
rcIkeActiveSAExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE Phase 1 SA mode."
|
|
::= { rcIkeActiveSAEntry 14 }
|
|
|
|
rcIkeActiveSALifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE Phase 1 SA remain valid during
|
|
IKE Phase 1 negotiation. A value of 0 means
|
|
no expiration."
|
|
::= { rcIkeActiveSAEntry 15 }
|
|
|
|
rcIkeActiveSAStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE Phase 1 SA remain valid during
|
|
IKE Phase 1 negotiation. A value of 0 means no
|
|
expiration."
|
|
::= { rcIkeActiveSAEntry 16 }
|
|
|
|
rcIkeActiveSAInitiator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initiator (1),
|
|
responder (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the whether the SA was
|
|
created by an Initiator or a Responder"
|
|
::= { rcIkeActiveSAEntry 17 }
|
|
|
|
-- IKE V2 PROFILE TABLE
|
|
rcIkeV2ProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeV2ProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of Ike v2 profiles
|
|
consisting of algorithms and other
|
|
configuration that can be used during an
|
|
IKE connection."
|
|
::= { rcIke 5 }
|
|
|
|
rcIkeV2ProfileEntry OBJECT-TYPE
|
|
SYNTAX RcIkeV2ProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing configuration information
|
|
for authentication algorithms, encryption
|
|
algorithms, Diffie-Helman group, exchange-mode
|
|
and lifetime-seconds to be used for
|
|
negotiation."
|
|
INDEX { rcIkeV2ProfileName }
|
|
::= { rcIkeV2ProfileTable 1 }
|
|
|
|
RcIkeV2ProfileEntry ::= SEQUENCE
|
|
{
|
|
rcIkeV2ProfileName DisplayString,
|
|
rcIkeV2ProfileHashAlgorithm BITS,
|
|
rcIkeV2ProfileEncryptionAlgorithm BITS,
|
|
rcIkeV2ProfileEncryptKeyLen BITS,
|
|
rcIkeV2ProfileDHGroup BITS,
|
|
rcIkeV2ProfileExchangeMode INTEGER,
|
|
rcIkeV2ProfileLifetimeSeconds Unsigned32,
|
|
rcIkeV2ProfileIntegrityAlgorithm BITS,
|
|
rcIkeV2ProfileRowStatus RowStatus
|
|
}
|
|
rcIkeV2ProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains the name of this Profile."
|
|
::= { rcIkeV2ProfileEntry 1 }
|
|
|
|
rcIkeV2ProfileHashAlgorithm OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
md5(0),
|
|
sha(1),
|
|
sha256(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithms
|
|
that can be used during IKE SA
|
|
negotiation.
|
|
It is represented in form of bits as follows-
|
|
bit 0 - md5
|
|
bit 1 - sha
|
|
bit 2 - sha256"
|
|
DEFVAL { {sha256} }
|
|
::= { rcIkeV2ProfileEntry 2 }
|
|
|
|
rcIkeV2ProfileEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
desCbc(0),
|
|
tripleDesCbc(1),
|
|
aesCbc(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithms that can be used during IKE
|
|
SA negotiation.
|
|
It is represented in form of bits as follows-
|
|
bit 0 - desCbc
|
|
bit 1 - tripleDesCbc
|
|
bit 2 - aesCbc"
|
|
DEFVAL { {aesCbc} }
|
|
::= { rcIkeV2ProfileEntry 3 }
|
|
|
|
rcIkeV2ProfileEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
keylen-128(0),
|
|
keylen-192(1),
|
|
keylen-256(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the key length
|
|
that should be be used during IKE
|
|
SA negotiation.
|
|
It is represented in form of bits as follows-
|
|
bit 0 - keylen-128
|
|
bit 1 - keylen-192
|
|
bit 2 - keylen-256"
|
|
DEFVAL { {keylen-256} }
|
|
::= { rcIkeV2ProfileEntry 4 }
|
|
|
|
rcIkeV2ProfileDHGroup OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
modp768(0),
|
|
modp1024(1),
|
|
modp2048(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
groups that can be used during IKE
|
|
SA negotiation.
|
|
It is represented in form of bits as follows -
|
|
bit 0 - modp768
|
|
bit 1 - modp1024
|
|
bit 2 - modp2048"
|
|
DEFVAL { {modp2048} }
|
|
::= { rcIkeV2ProfileEntry 5 }
|
|
|
|
rcIkeV2ProfileExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE
|
|
negotiation mode. Only main mode is
|
|
supported for this release."
|
|
DEFVAL { main }
|
|
::= { rcIkeV2ProfileEntry 6 }
|
|
|
|
rcIkeV2ProfileLifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE SA remain valid during
|
|
IKE negotiation. A value of 0 means no
|
|
expiration."
|
|
DEFVAL { 86400 }
|
|
::= { rcIkeV2ProfileEntry 7 }
|
|
|
|
|
|
rcIkeV2ProfileIntegrityAlgorithm OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
md5 (0),
|
|
sha1 (1),
|
|
sha256 (2),
|
|
aes-xcbc(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the integrity algorithms
|
|
that can be used during IKE SA
|
|
negotiation.
|
|
It is represented in form of bits as follows -
|
|
bit 0 - md5
|
|
bit 1 - sha1
|
|
bit 2 - sha256
|
|
bit 3 - aes-xcbc"
|
|
DEFVAL { {sha256} }
|
|
::= { rcIkeV2ProfileEntry 8 }
|
|
|
|
rcIkeV2ProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to create or delete
|
|
entries in this table."
|
|
::= { rcIkeV2ProfileEntry 9 }
|
|
|
|
-- IKE V2 SA TABLE
|
|
rcIkeV2SATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIkeV2SAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains a list of IKE V2
|
|
Security Association entries."
|
|
::= { rcIke 6 }
|
|
|
|
rcIkeV2SAEntry OBJECT-TYPE
|
|
SYNTAX RcIkeV2SAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
INDEX { rcIkeV2SAId,
|
|
rcIkeV2SALocalIfIndex,
|
|
rcIkeV2SALocalAddrType,
|
|
rcIkeV2SALocalAddr,
|
|
rcIkeV2SARemoteAddrType,
|
|
rcIkeV2SARemoteAddr
|
|
}
|
|
::= { rcIkeV2SATable 1 }
|
|
|
|
RcIkeV2SAEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIkeV2SAId Integer32,
|
|
rcIkeV2SALocalIfIndex InterfaceIndex,
|
|
rcIkeV2SALocalAddrType InetAddressType,
|
|
rcIkeV2SALocalAddr InetAddress,
|
|
rcIkeV2SARemoteAddrType InetAddressType,
|
|
rcIkeV2SARemoteAddr InetAddress,
|
|
rcIkeV2SAName DisplayString,
|
|
rcIkeV2SAAuthenticationMethod INTEGER,
|
|
rcIkeV2SADPDTimeout Unsigned32,
|
|
rcIkeV2SAHashAlgorithm INTEGER,
|
|
rcIkeV2SAEncryptionAlgorithm INTEGER,
|
|
rcIkeV2SAEncryptKeyLen INTEGER,
|
|
rcIkeV2SADHGroup INTEGER,
|
|
rcIkeV2SAExchangeMode INTEGER,
|
|
rcIkeV2SALifetimeSeconds Unsigned32,
|
|
rcIkeV2SAStatus INTEGER,
|
|
rcIkeV2SAInitiator INTEGER,
|
|
rcIkeV2SAIntegrityAlgorithm INTEGER
|
|
}
|
|
|
|
rcIkeV2SAId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the unique ID of a SA"
|
|
::= { rcIkeV2SAEntry 1 }
|
|
|
|
rcIkeV2SALocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the interface index
|
|
of the local address.
|
|
Only port and vlan if-index are supported
|
|
for this release."
|
|
::= { rcIkeV2SAEntry 2 }
|
|
|
|
rcIkeV2SALocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeActiveSALocalAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeV2SAEntry 3 }
|
|
|
|
rcIkeV2SALocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the local peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeV2SALocalAddrType."
|
|
::= { rcIkeV2SAEntry 4 }
|
|
|
|
rcIkeV2SARemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIkeV2SARemoteAddr.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIkeV2SAEntry 5 }
|
|
|
|
rcIkeV2SARemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the string representation
|
|
of the remote peer ID. The type of value
|
|
configured for this object is specified by the
|
|
rcIkeV2SARemoteAddrType."
|
|
::= { rcIkeV2SAEntry 6 }
|
|
|
|
rcIkeV2SAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the name for the SA."
|
|
::= { rcIkeV2SAEntry 7 }
|
|
|
|
rcIkeV2SAAuthenticationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
preSharedKey(1),
|
|
dssSignatures(2),
|
|
rsaSignatures(3),
|
|
encryptionWithRsa(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the proposed
|
|
authentication method for the phase 1
|
|
security association.
|
|
Only the Pre-Shared Key authentication
|
|
method is supported in this release."
|
|
DEFVAL { preSharedKey }
|
|
::= { rcIkeV2SAEntry 8 }
|
|
|
|
rcIkeV2SADPDTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Dead Peer
|
|
Detection timeout in seconds."
|
|
::= { rcIkeV2SAEntry 9 }
|
|
|
|
rcIkeV2SAHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5(1),
|
|
sha(2),
|
|
sha256(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the hash algorithm
|
|
negotiated for this IKEv2 SA."
|
|
::= { rcIkeV2SAEntry 10 }
|
|
|
|
rcIkeV2SAEncryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
desCbc(2),
|
|
tripleDesCbc(3),
|
|
aesCbc(12)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
algorithm negotiated for this IKEv2 SA."
|
|
::= { rcIkeV2SAEntry 11 }
|
|
|
|
rcIkeV2SAEncryptKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER (128|192|256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the encryption
|
|
key length negotiated for this IKE V2 SA."
|
|
::= { rcIkeV2SAEntry 12 }
|
|
|
|
rcIkeV2SADHGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
modp768(1),
|
|
modp1024(2),
|
|
modp2048(14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the Diffie-Hellman
|
|
group negotiated for this IKE V2 SA."
|
|
::= { rcIkeV2SAEntry 13 }
|
|
|
|
rcIkeV2SAExchangeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
aggressive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IKE V2 SA mode."
|
|
::= { rcIkeV2SAEntry 14 }
|
|
|
|
rcIkeV2SALifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE V2 SA remain valid during
|
|
IKE negotiation. A value of 0 means
|
|
no expiration."
|
|
::= { rcIkeV2SAEntry 15 }
|
|
|
|
rcIkeV2SAStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the amount of time to
|
|
propose an IKE V2 SA remain valid during
|
|
IKE V2 negotiation. A value of 0 means no
|
|
expiration."
|
|
::= { rcIkeV2SAEntry 16 }
|
|
|
|
rcIkeV2SAInitiator OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
initiator (1),
|
|
responder (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the whether the SA was
|
|
created by an Initiator or a Responder"
|
|
::= { rcIkeV2SAEntry 17 }
|
|
|
|
|
|
rcIkeV2SAIntegrityAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
md5 (1),
|
|
sha1 (2),
|
|
sha256 (12),
|
|
aes-xcbc (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the integrity algorithms
|
|
that can be used during IKEv2 SA
|
|
negotiation."
|
|
::= { rcIkeV2SAEntry 18 }
|
|
|
|
-- VLAN Table
|
|
|
|
rcVlanNumVlans OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of VLANs currently defined in the switch."
|
|
::= { rcVlan 1 }
|
|
|
|
rcVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of Virtual LAN entries. The number of entries
|
|
is given by rcVlanNumVlans."
|
|
::= { rcVlan 2 }
|
|
|
|
rcVlanEntry OBJECT-TYPE
|
|
SYNTAX RcVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular Virtual LAN.
|
|
|
|
The relationship between the various port sets in a
|
|
VLAN Entry are :
|
|
|
|
o The set of ports defined by PortMembers must be a
|
|
subset of the set of ports in the underlying STG of
|
|
the VLAN.
|
|
|
|
o The bitwise AND of PortMembers and NotAllowToJoin must
|
|
be the empty set.
|
|
|
|
o The bitwise OR of PortMembers and NotAllowToJoin must
|
|
be the set of ports in the underlying STG of the VLAN.
|
|
|
|
o The set of ports defined by StaticMembers must be a
|
|
subset of the set of ports defined by PortMembers.
|
|
|
|
o The bitwise XOR of PortMembers and StaticMembers defines
|
|
the set of dynamic (potential) members of the VLAN.
|
|
|
|
o The set of ports defined by ActiveMembers must be a subset
|
|
of the set of ports defined by PortMembers.
|
|
"
|
|
INDEX { rcVlanId }
|
|
::= { rcVlanTable 1 }
|
|
|
|
RcVlanEntry ::= SEQUENCE {
|
|
rcVlanId RcVlanIdOrNone,
|
|
rcVlanName DisplayString,
|
|
rcVlanColor INTEGER,
|
|
rcVlanHighPriority TruthValue, --excluded
|
|
rcVlanRoutingEnable TruthValue, --excluded
|
|
rcVlanIfIndex InterfaceIndex,
|
|
rcVlanAction INTEGER,
|
|
rcVlanResult INTEGER,
|
|
rcVlanStgId Integer32,
|
|
rcVlanType INTEGER,
|
|
rcVlanPortMembers PortSet,
|
|
rcVlanActiveMembers PortSet,
|
|
rcVlanStaticMembers PortSet,
|
|
rcVlanNotAllowToJoin PortSet,
|
|
rcVlanProtocolId INTEGER,
|
|
rcVlanSubnetAddr IpAddress,
|
|
rcVlanSubnetMask IpAddress,
|
|
rcVlanAgingTime Integer32,
|
|
rcVlanMacAddress MacAddress,
|
|
rcVlanRowStatus RowStatus,
|
|
rcVlanIgmpSnoopEnable TruthValue, --excluded
|
|
rcVlanIgmpSnoopReportProxyEnable TruthValue, --excluded
|
|
rcVlanIgmpSnoopRobustness Integer32, --excluded
|
|
rcVlanIgmpSnoopQueryInterval Integer32, --excluded
|
|
rcVlanIgmpSnoopMRouterPorts PortSet, --excluded
|
|
rcVlanUserDefinedPid Integer32,
|
|
rcVlanIgmpSnoopActiveMRouterPorts PortSet, --excluded
|
|
rcVlanProtocolIds Integer32,
|
|
rcVlanIgmpSnoopActiveQuerier IpAddress, --excluded
|
|
rcVlanIgmpSnoopMRouterExpiration Integer32, --excluded
|
|
rcVlanIgmpSnoopQuerierPort InterfaceIndex, --excluded
|
|
rcVlanUserPriority INTEGER,
|
|
rcVlanQosLevel INTEGER,
|
|
rcVlanTosValue Integer32,
|
|
rcVlanEncap INTEGER,
|
|
rcVlanFirewallVlanType INTEGER,
|
|
rcVlanFirewallClusterId INTEGER,
|
|
rcVlanOspfPassivePortMember PortSet,
|
|
rcVlanFdbAging Integer32,
|
|
rcVlanUpdateDynamicMacQosLevel EnableValue,
|
|
rcVlanUserDefinedPidList OCTET STRING,
|
|
rcVlanIgmpVer1SnoopMRouterPorts PortSet,
|
|
rcVlanIgmpVer2SnoopMRouterPorts PortSet,
|
|
rcVlanTlsIpmc EnableValue,
|
|
rcVlanUnkDstMacDiscard EnableValue,
|
|
rcVlanNlbMode INTEGER,
|
|
rcVlanOperNlbMode INTEGER,
|
|
rcVlanVrfId VrfIdentifier,
|
|
rcVlanVrfName DisplayString,
|
|
rcVlanMgmtVlan TruthValue,
|
|
rcVlanApplyBtagEthertype TruthValue,
|
|
rcVlanMmrp EnableValue,
|
|
rcVlanSource INTEGER,
|
|
rcVlanNodalMepList DisplayString,
|
|
rcVlanNumOfNodalMep Integer32,
|
|
rcVlanNodalMipLevelList DisplayString,
|
|
rcVlanNumOfNodalMipLevel Integer32,
|
|
rcVlanDhcpOption82Enabled TruthValue,
|
|
rcVlanIpMultinettingEnable TruthValue,
|
|
rcVlanAssociatedIpMultinettingVlan Integer32,
|
|
rcVlanPlsbIsid Integer32,
|
|
rcVlanVoiceEnabled TruthValue,
|
|
rcVlanRmonEnable TruthValue,
|
|
rcVlanIpsecEnable TruthValue,
|
|
rcVlanLPortMembers LPortSet,
|
|
rcVlanLPortActiveMembers LPortSet,
|
|
rcVlanLPortStaticMembers LPortSet,
|
|
rcVlanLPortNotAllowToJoin LPortSet,
|
|
rcVlanRspanEnabled TruthValue,
|
|
rcVlanSpbMcast EnableValue,
|
|
rcVlanSecondaryVlanId RcVlanIdOrNone,
|
|
rcVlanSecondaryIsid Integer32,
|
|
rcVlanPimGatewayEnable TruthValue,
|
|
rcVlanIpv6FhsSnoopDhcpEnable TruthValue,
|
|
rcVlanIpv6FhsNDInspectionEnable TruthValue,
|
|
rcVlanDvrEnable TruthValue,
|
|
rcVlanDvrGwIpv4Addr IpAddress,
|
|
rcVlanUntaggedPortMembers PortSet
|
|
}
|
|
|
|
rcVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual LAN
|
|
associated with this entry. This value corresponds
|
|
to the lower 12 bits in the IEEE 802.1Q VLAN Tag."
|
|
::= { rcVlanEntry 1 }
|
|
|
|
rcVlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this VLAN."
|
|
::= { rcVlanEntry 2 }
|
|
|
|
rcVlanColor OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned color code for this
|
|
VLAN. The value of this object is used by the VLAN
|
|
Manager GUI tool to select a color when it draws
|
|
this VLAN on the screen."
|
|
::= { rcVlanEntry 3 }
|
|
|
|
rcVlanHighPriority OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "A flag to note whether frames in this VLAN should
|
|
be assigned a high switching priority."
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 4 }
|
|
|
|
rcVlanRoutingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "A flag to note whether IP routing is enabled in
|
|
this VLAN."
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 5 }
|
|
|
|
rcVlanIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When rcVlanRoutingEnable is set to true(1), this
|
|
value indicates the 'logical' ifIndex assigned to
|
|
this VLAN. Otherwise, this value is meaningless
|
|
and should be set to zero."
|
|
::= { rcVlanEntry 6 }
|
|
|
|
rcVlanAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
flushMacFdb(2), -- flush MAC forwarding table
|
|
flushArp(3), -- flush ARP table
|
|
flushIp(4), -- flush IP route table
|
|
flushDynMemb(5), -- flush Dynamic Members
|
|
all(6), -- flush all tables
|
|
flushSnoopMemb(7), -- flush IGMP Snoop Members
|
|
triggerRipUpdate(8), -- manually trigger rip update
|
|
flushSnoopMRtr(9), -- flush snoop multicast route
|
|
flushIpRsmltEdgePeer(10), -- flush IP rsmlt edge peer
|
|
flushWlanFdb(11) -- flush entries learned via WLAN tunnel
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "VLAN related actions."
|
|
DEFVAL { none }
|
|
::= { rcVlanEntry 7 }
|
|
|
|
rcVlanResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
inProgress(2), -- in progress
|
|
success(3), -- success
|
|
fail(4) -- failure
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The result from the last VLAN action."
|
|
DEFVAL { none }
|
|
::= { rcVlanEntry 8 }
|
|
|
|
rcVlanStgId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Spanning Tree Group (STG) used by
|
|
this VLAN to determine the state of its ports.
|
|
If this VLAN is not associated with any STG, this
|
|
value should be set to zero."
|
|
DEFVAL { 1 }
|
|
::= { rcVlanEntry 9 }
|
|
|
|
rcVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
byPort(1), -- VLAN by Port
|
|
byIpSubnet(2), -- VLAN by IP subnet
|
|
byProtocolId(3), -- VLAN by Protocol Id
|
|
bySrcMac(4), -- VLAN by Src MAC address
|
|
byDstMcast(5), -- VLAN by Dst MultiCast
|
|
bySvlan(6), -- VLAN by Stacked Vlan (not supported in VSP9000)
|
|
byIds(7), -- VLAN by IDS Vlan (not supported in VSP9000)
|
|
byPortIp(8), -- VLAN by Port type IP
|
|
byPortEvpn(9), -- VLAN by Port type EVPN
|
|
byPortDefault(10),-- VLAN by Port type Default
|
|
spbm-bvlan(11), -- SPBM bvlan
|
|
spbm-switchedUni(12), -- SPBM switched UNI VLAN
|
|
private(13) -- Private VLAN
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of VLAN, distinguished according to the
|
|
policy used to define its port membership.
|
|
VSP9000 does not support bySvlan(6) and ByIds(7)."
|
|
::= { rcVlanEntry 10 }
|
|
|
|
rcVlanPortMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are members (static or
|
|
dynamic) of this VLAN."
|
|
::= { rcVlanEntry 11 }
|
|
|
|
rcVlanActiveMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are currently active in
|
|
this VLAN. Active ports include all static ports
|
|
and any dynamic ports where the VLAN policy was
|
|
met."
|
|
::= { rcVlanEntry 12 }
|
|
|
|
rcVlanStaticMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are static members of this
|
|
VLAN. A static member of a VLAN is always active
|
|
and is never aged out."
|
|
::= { rcVlanEntry 13 }
|
|
|
|
rcVlanNotAllowToJoin OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are not allowed to become
|
|
members of this VLAN."
|
|
::= { rcVlanEntry 14 }
|
|
|
|
rcVlanProtocolId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
ip(1),
|
|
ipx802dot3(2),
|
|
ipx802dot2(3),
|
|
ipxSnap(4),
|
|
ipxEthernet2(5),
|
|
appleTalk(6),
|
|
decLat(7),
|
|
decOther(8),
|
|
sna802dot2(9),
|
|
snaEthernet2(10),
|
|
netBios(11),
|
|
xns(12),
|
|
vines(13),
|
|
ipV6(14),
|
|
usrDefined(15),
|
|
rarp(16),
|
|
pPPoE(17),
|
|
arp(18)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The protocol identifier of this VLAN. This value
|
|
is meaningful only if rcVlanType is equal to
|
|
byProtocolId(3). For other VLAN types it should
|
|
have the value none(0)."
|
|
::= { rcVlanEntry 15 }
|
|
|
|
rcVlanSubnetAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP subnet address of this VLAN. This value
|
|
is meaningful only if rcVlanType is equal to
|
|
byIpSubnet(2). For other VLAN types it should
|
|
have the value 0.0.0.0."
|
|
::= { rcVlanEntry 16 }
|
|
|
|
rcVlanSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP subnet mask of this VLAN. This value
|
|
is meaningful only if rcVlanType is equal to
|
|
byIpSubnet(2). For other VLAN types it should
|
|
have the value 0.0.0.0."
|
|
::= { rcVlanEntry 17 }
|
|
|
|
rcVlanAgingTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 10..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The timeout period (in seconds) used for aging
|
|
out dynamic members of this VLAN. This field is
|
|
only relevant for policy-based VLANs."
|
|
DEFVAL { 600 }
|
|
::= { rcVlanEntry 18 }
|
|
|
|
rcVlanMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address assigned to the virtual router
|
|
interface of this VLAN. This field is meaningful
|
|
only if rcVlanRoutingEnable is equal to true(1)."
|
|
::= { rcVlanEntry 19 }
|
|
|
|
rcVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcVlanTable."
|
|
::= { rcVlanEntry 20 }
|
|
|
|
rcVlanIgmpSnoopEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "A flag to note whether IGMP Snooping is enabled
|
|
on this VLAN."
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 21 }
|
|
|
|
rcVlanIgmpSnoopReportProxyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "A flag to note whether IGMP Report Proxy is
|
|
enabled on this VLAN."
|
|
DEFVAL { true }
|
|
::= { rcVlanEntry 22 }
|
|
|
|
rcVlanIgmpSnoopRobustness OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "This variable allows tuning for the expected
|
|
packet loss on a subnet. If a subnet is expected
|
|
to be lossy, the Robustness variable may be
|
|
increased. IGMP is robust to (Robustness - 1)
|
|
packet losses."
|
|
DEFVAL { 2 }
|
|
::= { rcVlanEntry 23 }
|
|
|
|
rcVlanIgmpSnoopQueryInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The interval (in seconds) between IGMP Host-Query
|
|
packets transmitted on this interface."
|
|
DEFVAL { 125 }
|
|
::= { rcVlanEntry 24 }
|
|
|
|
rcVlanIgmpSnoopMRouterPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The set of ports in this VLAN that provide
|
|
connectivity to an IP Multicast router."
|
|
::= { rcVlanEntry 25 }
|
|
|
|
rcVlanUserDefinedPid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When rcVlanProtocolId is set to usrDefined(15)
|
|
in a protocol-based VLAN, this field represents
|
|
the 16-bit user defined protocol identifier."
|
|
::= { rcVlanEntry 26 }
|
|
|
|
rcVlanIgmpSnoopActiveMRouterPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Active ports."
|
|
::= { rcVlanEntry 27 }
|
|
|
|
rcVlanProtocolIds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Bitfield of protocol ids."
|
|
::= { rcVlanEntry 28 }
|
|
|
|
rcVlanIgmpSnoopActiveQuerier OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "IP address of multicast querier router."
|
|
::= { rcVlanEntry 29 }
|
|
|
|
rcVlanIgmpSnoopMRouterExpiration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Multicast querier router aging time out."
|
|
::= { rcVlanEntry 30 }
|
|
|
|
rcVlanIgmpSnoopQuerierPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The port on which the multicast querier router
|
|
was heard."
|
|
::= { rcVlanEntry 31 }
|
|
|
|
rcVlanUserPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "User priority level."
|
|
::= { rcVlanEntry 32 }
|
|
|
|
rcVlanQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the Qos level packets, carried in this
|
|
VLAN, should be processed with."
|
|
DEFVAL { level1 }
|
|
::= { rcVlanEntry 33 }
|
|
|
|
rcVlanTosValue OBJECT-TYPE
|
|
SYNTAX Integer32 (1..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Tos value."
|
|
DEFVAL { 1 }
|
|
::= { rcVlanEntry 34 }
|
|
|
|
rcVlanEncap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ethernet2(1),
|
|
llc(2),
|
|
snap(3),
|
|
all(4),
|
|
notapplicable(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is the encapsulation type for userdefined protocol
|
|
based vlans. This is not meaningful for other types of
|
|
vlan. The default value is null."
|
|
DEFVAL { notapplicable }
|
|
::= { rcVlanEntry 35 }
|
|
|
|
rcVlanFirewallVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
naap(2),
|
|
enforceable(3),
|
|
peering(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is the firewall vlan type for port based
|
|
vlans."
|
|
DEFVAL { none }
|
|
::= { rcVlanEntry 36 }
|
|
rcVlanFdbAging OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 10..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The timeout period (in seconds) used for aging
|
|
out fdb entries of this VLAN."
|
|
DEFVAL { 600 }
|
|
::= { rcVlanEntry 37 }
|
|
|
|
rcVlanUpdateDynamicMacQosLevel OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "It is used to indicate whether to update qos
|
|
level for dynamic learned mac add resses
|
|
associated with a subnet-based or protocol-based
|
|
vlan when vlan qos level changes. If it is set
|
|
to TRUE, qos level for all dynamic learned mac
|
|
addresses will be changed upon changing vlan qos
|
|
level. If it is set to DISABLE, once a mac address
|
|
is learned, qos level will not updated when vlan
|
|
qos level changes."
|
|
DEFVAL { disable }
|
|
::= { rcVlanEntry 38 }
|
|
|
|
rcVlanUserDefinedPidList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "A list of Protocol Id to usrDefined in a protocol-based
|
|
VLAN, this field represents the list user defined protocol identifier."
|
|
::= { rcVlanEntry 39 }
|
|
|
|
rcVlanIgmpVer1SnoopMRouterPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The set of ports in this VLAN that provide connectivity
|
|
to an IP Multicast router using IGMP Version 1."
|
|
::= { rcVlanEntry 40 }
|
|
|
|
rcVlanIgmpVer2SnoopMRouterPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The set of ports in this VLAN that provide connectivity
|
|
to an IP Multicast router using IGMP version 2."
|
|
::= { rcVlanEntry 41 }
|
|
|
|
rcVlanTlsIpmc OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable the IP Mcast for this SP IP service Vlan for
|
|
TLS OE feature"
|
|
DEFVAL { disable }
|
|
::= { rcVlanEntry 42 }
|
|
|
|
rcVlanFirewallClusterId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Firewall cluster Id"
|
|
DEFVAL { 1 }
|
|
::= { rcVlanEntry 43 }
|
|
|
|
rcVlanOspfPassivePortMember OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of ports in the vlan that are designated as
|
|
ospf passive"
|
|
::= { rcVlanEntry 44 }
|
|
|
|
rcVlanUnkDstMacDiscard OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Unknown Destination Mac Discard on Vlan"
|
|
DEFVAL { disable }
|
|
::= { rcVlanEntry 45 }
|
|
|
|
rcVlanNlbMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nlbAdminDisable(0),
|
|
nlbAdminIgmpMcast(1),
|
|
nlbAdminMulticast(2),
|
|
nlbAdminUnicast(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "NLB mode set on a VLAN."
|
|
DEFVAL { nlbAdminDisable }
|
|
::= { rcVlanEntry 46 }
|
|
|
|
rcVlanOperNlbMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nlbOperDisable(0),
|
|
nlbOperIgmpMcast(1),
|
|
nlbOperMulticast(2),
|
|
nlbOperUnicast(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Oper NLB mode of a VLAN."
|
|
::= { rcVlanEntry 47 }
|
|
|
|
rcVlanVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Virtual Router to which the VLAN belongs"
|
|
::= { rcVlanEntry 48 }
|
|
|
|
rcVlanVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Name of the Virtual Router to which the VLAN belongs"
|
|
::= { rcVlanEntry 49 }
|
|
|
|
rcVlanMgmtVlan OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This displays the management vlan configuration"
|
|
::= { rcVlanEntry 50}
|
|
|
|
rcVlanApplyBtagEthertype OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to apply user configured btag ethertype to
|
|
the Vlan"
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 51}
|
|
|
|
rcVlanMmrp OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This displays the MMRP enable state for the vlan"
|
|
::= { rcVlanEntry 52}
|
|
|
|
rcVlanSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dynamicMvmp(2),
|
|
dynamicGvrp(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates how this VLAN was created:
|
|
|
|
static(1) - Indicates the VLAN was manually configured by an
|
|
operator.
|
|
|
|
dynamicMvmp(2) - Indicates the VLAN was dynamically created by
|
|
MVMP (Mobility VLAN Management Protocol).
|
|
|
|
dynamicGvrp(3) - Indicates the VLAN was dynamically created
|
|
by GVRP."
|
|
::= { rcVlanEntry 53 }
|
|
|
|
rcVlanNodalMepList OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..408))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "List of nodal Meps assigned to this vlan. A mep
|
|
consists of Domain Name, Association name and Mep
|
|
Id separated by '.'. Each meps is separated by ',':
|
|
<md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,...
|
|
The maximum number of nodal Mep for each vlan is 8."
|
|
::= { rcVlanEntry 54}
|
|
|
|
rcVlanNumOfNodalMep OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of nodal meps assigned to this vlan"
|
|
::= { rcVlanEntry 55 }
|
|
|
|
rcVlanNodalMipLevelList OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "List of nodal Mip levels assigned to this vlan that
|
|
allows Mip functionality to be enabled on a per level
|
|
per vlan basis. A mip level is represented by an
|
|
integer ranging from 0 to 7. The mip levels are
|
|
separated by ',': <0...7>,<0...7>,... The maximum
|
|
number of nodal Mip levels for each vlan is 8."
|
|
::= { rcVlanEntry 56 }
|
|
|
|
rcVlanNumOfNodalMipLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of nodal mip levels assigned to this vlan that
|
|
allows MIP functionality to be enabled on a per level
|
|
per vlan basis."
|
|
::= { rcVlanEntry 57 }
|
|
|
|
rcVlanDhcpOption82Enabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object is used to control whether DHCP option 82
|
|
is enabled for this VLAN."
|
|
::= { rcVlanEntry 58 }
|
|
|
|
rcVlanIpMultinettingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate if the vlan is an Ip Multinetting vlan. If enabled,
|
|
rcVlanAssociatedIpMultinettingVlan should be set to 0"
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 59 }
|
|
|
|
rcVlanAssociatedIpMultinettingVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Associated Ip Multinetting vlan Id whose rcVlanIpMultinettingEnable
|
|
attribute is set "
|
|
DEFVAL { 0 }
|
|
::= { rcVlanEntry 60 }
|
|
|
|
rcVlanPlsbIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Plsb i-sid number assigned to a C-vlan or the i-sid
|
|
value for primary private VLAN. Default 0 value
|
|
indicates that no i-sid has been assigned."
|
|
DEFVAL { 0 }
|
|
::= { rcVlanEntry 61 }
|
|
|
|
rcVlanVoiceEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used to control whether voice option
|
|
is enabled for this VLAN."
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 62 }
|
|
|
|
rcVlanRmonEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate if the vlan is enabled for Remote Monitoring"
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 63 }
|
|
|
|
rcVlanIpsecEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Indicate if the vlan is enabled for IPSEC.
|
|
at place of this value use RcIpConfEntry for IPV4
|
|
and use RcIpv6InterfaceEntry for IPV6. This field
|
|
changed to deprecated"
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 64 }
|
|
|
|
rcVlanLPortMembers OBJECT-TYPE
|
|
SYNTAX LPortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of logical ports (for example, WLAN tunnels)
|
|
that are members (dynamic) of this VLAN."
|
|
::= { rcVlanEntry 65 }
|
|
|
|
rcVlanLPortActiveMembers OBJECT-TYPE
|
|
SYNTAX LPortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of logical ports (for example, WLAN tunnels)
|
|
that are currently active in this VLAN. Active ports
|
|
include all dynamic ports where the VLAN policy was met."
|
|
::= { rcVlanEntry 66 }
|
|
|
|
rcVlanLPortStaticMembers OBJECT-TYPE
|
|
SYNTAX LPortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of logical ports (for example, WLAN tunnels)
|
|
that are static members of this VLAN. A static member
|
|
of a VLAN is always active and is never aged out."
|
|
::= { rcVlanEntry 67 }
|
|
|
|
rcVlanLPortNotAllowToJoin OBJECT-TYPE
|
|
SYNTAX LPortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of logical ports (for example, WLAN tunnels)
|
|
that are not allowed to become members of this VLAN."
|
|
::= { rcVlanEntry 68 }
|
|
|
|
rcVlanRspanEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used to control whether rspan option
|
|
is enabled for this VLAN."
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 69 }
|
|
|
|
rcVlanSpbMcast OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable SPB multicast on Vlan"
|
|
DEFVAL { disable }
|
|
::= { rcVlanEntry 70 }
|
|
|
|
rcVlanSecondaryVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the secondary
|
|
Virtual LAN associated with the primary private VLAN.
|
|
This value corresponds to the lower 12 bits in
|
|
the IEEE 802.1Q VLAN Tag."
|
|
::= { rcVlanEntry 71 }
|
|
|
|
rcVlanSecondaryIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The i-sid number assigned to a secondary VLAN if it
|
|
exists. Default 0 value."
|
|
DEFVAL { 0 }
|
|
::= { rcVlanEntry 72 }
|
|
|
|
rcVlanPimGatewayEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable PIM Gateway on Vlan"
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 73 }
|
|
|
|
rcVlanIpv6FhsSnoopDhcpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicate if IPv6 DHCP snooping is enabled on the vlan"
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 74 }
|
|
|
|
rcVlanIpv6FhsNDInspectionEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicate if ND inspection is enabled on the vlan"
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 75 }
|
|
|
|
rcVlanDvrEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable DVR on Vlan"
|
|
DEFVAL { false }
|
|
::= { rcVlanEntry 76 }
|
|
|
|
rcVlanDvrGwIpv4Addr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Gateway IPv4 address for this DVR enabled node on Vlan."
|
|
::= { rcVlanEntry 77 }
|
|
|
|
rcVlanUntaggedPortMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The set of untagged ports that are members of this VLAN."
|
|
::= { rcVlanEntry 78 }
|
|
|
|
-- VLAN Port Table
|
|
|
|
rcVlanPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain VLAN port related
|
|
information."
|
|
::= { rcVlan 3 }
|
|
|
|
rcVlanPortEntry OBJECT-TYPE
|
|
SYNTAX RcVlanPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing VLAN information regarding a
|
|
particular port."
|
|
INDEX { rcVlanPortIndex }
|
|
::= { rcVlanPortTable 1 }
|
|
|
|
RcVlanPortEntry ::= SEQUENCE {
|
|
rcVlanPortIndex Integer32,
|
|
rcVlanPortNumVlanIds Integer32,
|
|
rcVlanPortVlanIds IdList,
|
|
rcVlanPortType INTEGER,
|
|
rcVlanPortDiscardTaggedFrames TruthValue,
|
|
rcVlanPortDiscardUntaggedFrames TruthValue,
|
|
rcVlanPortDefaultVlanId INTEGER,
|
|
rcVlanPortPerformTagging INTEGER,
|
|
rcVlanPortSVlanPortType INTEGER,
|
|
rcVlanPortLoopDetect TruthValue,
|
|
rcVlanPortFirstPortInOpid InterfaceIndex,
|
|
rcVlanPortLastPortInOpid InterfaceIndex,
|
|
rcVlanPortLoopDetectAction INTEGER,
|
|
rcVlanPortArpDetect TruthValue,
|
|
rcVlanPortSpoofDetect TruthValue,
|
|
rcVlanPortRemarking TruthValue,
|
|
rcVlanPortUntagDefaultVlan TruthValue,
|
|
rcVlanPortClassificationSubnet TruthValue,
|
|
rcVlanPortClassificationProtocol TruthValue,
|
|
rcVlanPortClassificationPrec INTEGER,
|
|
rcVlanPortVlanIdList OCTET STRING,
|
|
rcVlanPortClassificationSourceMac TruthValue,
|
|
rcVlanPortPrivateVlanPortType INTEGER,
|
|
rcVlanPortUntaggedVlanIds RcVlanMask
|
|
}
|
|
|
|
rcVlanPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
port in the system. This index is equal to the
|
|
ifIndex of the port."
|
|
::= { rcVlanPortEntry 1 }
|
|
|
|
rcVlanPortNumVlanIds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of VLAN IDs that
|
|
are stored in the rcVlanPortVlanIds variable."
|
|
::= { rcVlanPortEntry 2 }
|
|
|
|
rcVlanPortVlanIds OBJECT-TYPE
|
|
SYNTAX IdList (SIZE (0..4096))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An array used to identify which VLANs this port
|
|
is assigned to. Each VLAN ID is stored as a two
|
|
octet value. The first octet in the pair holds
|
|
bits 15-8 of the VLAN ID, while the second octet
|
|
holds bits 7-0 of the VLAN ID.
|
|
This object is now replaced by rcVlanPortVlanIdList."
|
|
::= { rcVlanPortEntry 3 }
|
|
|
|
rcVlanPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
access(1), -- access port type
|
|
trunk(2) -- trunk port type
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of port: access(1) or trunk(2)."
|
|
DEFVAL { access }
|
|
::= { rcVlanPortEntry 4 }
|
|
|
|
rcVlanPortDiscardTaggedFrames OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A flag used to determine how to process tagged
|
|
frames received on this access port. When the
|
|
flag is set, these frames are discarded by the
|
|
forwarding process. When the flag is reset, these
|
|
frames are processed normally.
|
|
|
|
This field is meaningless when the port is not
|
|
an access port and should be set to false(2)."
|
|
DEFVAL { false }
|
|
::= { rcVlanPortEntry 5 }
|
|
|
|
rcVlanPortDiscardUntaggedFrames OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A flag used to determine how to process untagged
|
|
frames received on this trunk port. When the flag
|
|
is set, these frames are discarded by the
|
|
forwarding process. When the flag is reset, these
|
|
frames are assigned to the VLAN specified by
|
|
rcVlanPortDefaultVlanId.
|
|
|
|
This field is meaningless when the port is not
|
|
a trunk port and should be set to false(2)."
|
|
DEFVAL { false }
|
|
::= { rcVlanPortEntry 6 }
|
|
|
|
rcVlanPortDefaultVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VLAN ID assigned to untagged frames received
|
|
on this trunk port.
|
|
|
|
This field is meaningless when the port is not
|
|
a trunk port."
|
|
DEFVAL { 1 }
|
|
::= { rcVlanPortEntry 7 }
|
|
|
|
rcVlanPortPerformTagging OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2),
|
|
tagPvidOnly(3),
|
|
untagPvidOnly(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable the port on the current vlan to
|
|
perform tagging on the incoming and outgoing traffic."
|
|
DEFVAL { false }
|
|
::= { rcVlanPortEntry 8 }
|
|
|
|
rcVlanPortSVlanPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
uni(2),
|
|
nni(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of port."
|
|
DEFVAL { normal }
|
|
::= { rcVlanPortEntry 9 }
|
|
|
|
rcVlanPortLoopDetect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable loop detection on this port"
|
|
DEFVAL { false }
|
|
::= { rcVlanPortEntry 10 }
|
|
|
|
rcVlanPortFirstPortInOpid OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value gives the IfIndex of the first port in the
|
|
octapid. This value is used to generate an error message
|
|
when changing port type from normal to uni/nni and
|
|
viceversa"
|
|
::= { rcVlanPortEntry 11 }
|
|
|
|
rcVlanPortLastPortInOpid OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value gives the IfIndex of the first port in the
|
|
octapid. This value is used to generate an error message
|
|
when changing port type from normal to uni/nni and
|
|
viceversa"
|
|
::= { rcVlanPortEntry 12 }
|
|
|
|
rcVlanPortUntagDefaultVlan OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable/disable Egress Tagging on the Default Vlan of the
|
|
port. "
|
|
DEFVAL { false }
|
|
::= { rcVlanPortEntry 13 }
|
|
|
|
rcVlanPortLoopDetectAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
portDown(1),
|
|
vlanBlock(2),
|
|
macDiscard(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value is used to specify the action which needs
|
|
to be taken once a loop is detected on a specific port.
|
|
VlanBlock is not supported in VSP9000."
|
|
DEFVAL { portDown }
|
|
::= { rcVlanPortEntry 14 }
|
|
|
|
rcVlanPortArpDetect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Arp detection on this port"
|
|
DEFVAL { false }
|
|
::= { rcVlanPortEntry 15 }
|
|
|
|
rcVlanPortSpoofDetect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable spoof detection on this port"
|
|
DEFVAL { false }
|
|
::= { rcVlanPortEntry 16 }
|
|
|
|
rcVlanPortRemarking OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable remarking on this port"
|
|
DEFVAL { false }
|
|
::= { rcVlanPortEntry 17 }
|
|
|
|
rcVlanPortClassificationSubnet OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Subnet based Vlan packets on this port."
|
|
DEFVAL { true }
|
|
::= { rcVlanPortEntry 18 }
|
|
|
|
rcVlanPortClassificationProtocol OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Protocol based Vlan packets on this port."
|
|
DEFVAL { true }
|
|
::= { rcVlanPortEntry 19}
|
|
|
|
rcVlanPortClassificationPrec OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sourceMac (1),
|
|
subnet (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Sets the precedence for vlan classification. A value
|
|
of 1 puts classification of packets to source mac vlans
|
|
ahead of subnet based vlans. A value of 2 puts subnet
|
|
based vlans ahead of source mac vlans. Classification
|
|
to other types of vlans is unaffected as it occurs
|
|
following source mac and subnet based vlans."
|
|
DEFVAL { sourceMac }
|
|
::= { rcVlanPortEntry 20 }
|
|
|
|
rcVlanPortVlanIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..512))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This bitfield is used to identify which VLANs this port
|
|
is assigned to. Each VLAN ID is stored as a bit.
|
|
The most-significant (left-most) bit represents Vlan Id 1."
|
|
::= { rcVlanPortEntry 21 }
|
|
|
|
rcVlanPortClassificationSourceMac OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable SourceMac based Vlan packets on this port."
|
|
DEFVAL { true }
|
|
::= { rcVlanPortEntry 22 }
|
|
|
|
rcVlanPortPrivateVlanPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
trunk(1),
|
|
isolated(2),
|
|
promiscuous(3),
|
|
none(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of port associated with private VLAN.
|
|
If the VLAN is not private then this is ignored.
|
|
If the VLAN is private then the value must be
|
|
either trunk, isolated, or promiscuous. Setting
|
|
the value to trunk will enable tagging. Setting
|
|
the value to isolated or promiscuous will remove
|
|
non-private VLANs from the port."
|
|
DEFVAL { none }
|
|
::= { rcVlanPortEntry 23 }
|
|
|
|
rcVlanPortUntaggedVlanIds OBJECT-TYPE
|
|
SYNTAX RcVlanMask
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object is used to identify which VLANs this port
|
|
is associated with as untagged."
|
|
::= { rcVlanPortEntry 24 }
|
|
|
|
-- VLAN MAC Table
|
|
|
|
rcVlanMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain MAC addresses assigned
|
|
to a particular VLAN by MAC address."
|
|
::= { rcVlan 4 }
|
|
|
|
rcVlanMacEntry OBJECT-TYPE
|
|
SYNTAX RcVlanMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing VLAN information regarding a
|
|
particular port."
|
|
INDEX { rcVlanMacVlanId, rcVlanMacAddr }
|
|
::= { rcVlanMacTable 1 }
|
|
|
|
RcVlanMacEntry ::= SEQUENCE {
|
|
rcVlanMacVlanId Integer32,
|
|
rcVlanMacAddr MacAddress,
|
|
rcVlanMacRowStatus RowStatus
|
|
}
|
|
|
|
rcVlanMacVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a VLAN (by MAC
|
|
address) in the system."
|
|
::= { rcVlanMacEntry 1 }
|
|
|
|
rcVlanMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a MAC address
|
|
assigned to a particular VLAN."
|
|
::= { rcVlanMacEntry 2 }
|
|
|
|
rcVlanMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status for this entry."
|
|
::= { rcVlanMacEntry 3 }
|
|
|
|
|
|
-- VLAN IGMP Snoop Table
|
|
|
|
rcVlanIgmpSnoopNumGroups OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of entries (rows) in the
|
|
rcVlanIgmpSnoopTable."
|
|
::= { rcVlan 5 }
|
|
|
|
rcVlanIgmpSnoopTable OBJECT-TYPE --excluded
|
|
SYNTAX SEQUENCE OF RcVlanIgmpSnoopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "The (conceptual) table listing the IP multicast
|
|
groups for which there are members on a particular
|
|
interface on a particular VLAN (i.e., a list
|
|
known multicast receivers).
|
|
|
|
A row is created by the system when it receives
|
|
an IGMP Join messages on a port."
|
|
::= { rcVlan 6 }
|
|
|
|
rcVlanIgmpSnoopEntry OBJECT-TYPE
|
|
SYNTAX RcVlanIgmpSnoopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry (row) in the rcVlanIgmpSnoopTable."
|
|
INDEX { rcVlanIgmpSnoopVlanId, rcVlanIgmpSnoopIpAddress,
|
|
rcVlanIgmpSnoopIfIndex, rcVlanIgmpSnoopMember }
|
|
::= { rcVlanIgmpSnoopTable 1 }
|
|
|
|
RcVlanIgmpSnoopEntry ::= SEQUENCE {
|
|
rcVlanIgmpSnoopVlanId RcVlanIdOrNone,
|
|
rcVlanIgmpSnoopIpAddress IpAddress,
|
|
rcVlanIgmpSnoopIfIndex InterfaceIndex,
|
|
rcVlanIgmpSnoopMember IpAddress,
|
|
rcVlanIgmpSnoopExpiration Integer32,
|
|
rcVlanIgmpSnoopType INTEGER
|
|
}
|
|
|
|
rcVlanIgmpSnoopVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The VLAN for which this entry contains
|
|
information."
|
|
::= { rcVlanIgmpSnoopEntry 1 }
|
|
|
|
rcVlanIgmpSnoopIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The IP multicast group address for which this
|
|
entry contains information."
|
|
::= { rcVlanIgmpSnoopEntry 2 }
|
|
|
|
rcVlanIgmpSnoopIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The interface for which this entry contains
|
|
information for this IP multicast group address
|
|
(i.e., the port the Join message was received)."
|
|
::= { rcVlanIgmpSnoopEntry 3 }
|
|
|
|
rcVlanIgmpSnoopMember OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The IP Address of the source of the membership
|
|
report received for this IP Multicast group address
|
|
on this interface (i.e., the address of the host
|
|
sending the Join message)."
|
|
::= { rcVlanIgmpSnoopEntry 4 }
|
|
|
|
rcVlanIgmpSnoopExpiration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The minimum amount of time remaining before this
|
|
entry will be aged out."
|
|
::= { rcVlanIgmpSnoopEntry 5 }
|
|
|
|
rcVlanIgmpSnoopType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic(1), -- created via IGMP
|
|
static(2), -- created via management
|
|
blocked(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The type of entry: dynamic(1) entries are
|
|
created by snooping IGMP messages, static(2)
|
|
entries are created via management."
|
|
::= { rcVlanIgmpSnoopEntry 6 }
|
|
|
|
|
|
-- VLAN IGMP Snoop Static Table
|
|
|
|
rcVlanIgmpSnoopStaticTable OBJECT-TYPE --excluded
|
|
SYNTAX SEQUENCE OF RcVlanIgmpSnoopStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "The (conceptual) table listing the statically-
|
|
defined IP multicast groups for which there are
|
|
members on a particular interface on a particular
|
|
VLAN."
|
|
::= { rcVlan 7 }
|
|
|
|
rcVlanIgmpSnoopStaticEntry OBJECT-TYPE
|
|
SYNTAX RcVlanIgmpSnoopStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry (row) in the rcVlanIgmpSnoopStaticTable."
|
|
INDEX { rcVlanIgmpSnoopStaticVlanId, rcVlanIgmpSnoopStaticIpAddress }
|
|
::= { rcVlanIgmpSnoopStaticTable 1 }
|
|
|
|
RcVlanIgmpSnoopStaticEntry ::= SEQUENCE {
|
|
rcVlanIgmpSnoopStaticVlanId RcVlanIdOrNone,
|
|
rcVlanIgmpSnoopStaticIpAddress IpAddress,
|
|
rcVlanIgmpSnoopStaticMemberPorts PortSet,
|
|
rcVlanIgmpSnoopStaticRowStatus RowStatus,
|
|
rcVlanIgmpSnoopStaticNotAllowedToJoin PortSet
|
|
}
|
|
|
|
rcVlanIgmpSnoopStaticVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The VLAN for which this entry contains information."
|
|
::= { rcVlanIgmpSnoopStaticEntry 1 }
|
|
|
|
rcVlanIgmpSnoopStaticIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The IP multicast group address for which this
|
|
entry contains information. The address must
|
|
fall within 224.0.1.0 to 239.255.255.255."
|
|
::= { rcVlanIgmpSnoopStaticEntry 2 }
|
|
|
|
rcVlanIgmpSnoopStaticMemberPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The set of ports in this VLAN multicast traffic
|
|
for the rcVlanIgmpSnoopStaticIpAddress is to be
|
|
forwarded to."
|
|
::= { rcVlanIgmpSnoopStaticEntry 3 }
|
|
|
|
rcVlanIgmpSnoopStaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to create/delete entries in the
|
|
rcVlanIgmpSnoopStaticTable."
|
|
::= { rcVlanIgmpSnoopStaticEntry 4 }
|
|
|
|
rcVlanIgmpSnoopStaticNotAllowedToJoin OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Not allowed to join"
|
|
::= { rcVlanIgmpSnoopStaticEntry 5 }
|
|
|
|
|
|
-- VLAN IGMP Snoop Access Table
|
|
|
|
rcVlanIgmpSnoopAccessTable OBJECT-TYPE --excluded
|
|
SYNTAX SEQUENCE OF RcVlanIgmpSnoopAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Table used to specify which host(s) can send
|
|
and/or receive IP Multicast traffic."
|
|
::= { rcVlan 8 }
|
|
|
|
rcVlanIgmpSnoopAccessEntry OBJECT-TYPE
|
|
SYNTAX RcVlanIgmpSnoopAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry (row) in the rcVlanIgmpSnoopAccessTable."
|
|
INDEX { rcVlanIgmpSnoopAccessVlanId,
|
|
rcVlanIgmpSnoopAccessGrpAddr,
|
|
rcVlanIgmpSnoopAccessHostAddr,
|
|
rcVlanIgmpSnoopAccessHostMask }
|
|
::= { rcVlanIgmpSnoopAccessTable 1 }
|
|
|
|
|
|
RcVlanIgmpSnoopAccessEntry ::= SEQUENCE {
|
|
rcVlanIgmpSnoopAccessVlanId RcVlanIdOrNone,
|
|
rcVlanIgmpSnoopAccessGrpAddr IpAddress,
|
|
rcVlanIgmpSnoopAccessHostAddr IpAddress,
|
|
rcVlanIgmpSnoopAccessHostMask IpAddress,
|
|
rcVlanIgmpSnoopAccessMode INTEGER,
|
|
rcVlanIgmpSnoopAccessRowStatus RowStatus
|
|
}
|
|
|
|
rcVlanIgmpSnoopAccessVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The VLAN for which this entry contains information."
|
|
::= { rcVlanIgmpSnoopAccessEntry 1 }
|
|
|
|
rcVlanIgmpSnoopAccessGrpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The IP multicast group address for which this
|
|
entry contains information."
|
|
::= { rcVlanIgmpSnoopAccessEntry 2 }
|
|
|
|
rcVlanIgmpSnoopAccessHostAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The IP address of a host for which this
|
|
entry contains information."
|
|
::= { rcVlanIgmpSnoopAccessEntry 3 }
|
|
|
|
rcVlanIgmpSnoopAccessHostMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The IP netmask of a host for which this
|
|
entry contains information."
|
|
::= { rcVlanIgmpSnoopAccessEntry 4 }
|
|
|
|
rcVlanIgmpSnoopAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
denyTx(1),
|
|
denyRx(2),
|
|
denyBoth(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to specify whether the host identified by
|
|
rcVlanIgmpSnoopAccessHostAddr should be denied
|
|
IP multicast transmit, receive, or both."
|
|
::= { rcVlanIgmpSnoopAccessEntry 5 }
|
|
|
|
rcVlanIgmpSnoopAccessRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status"
|
|
::= { rcVlanIgmpSnoopAccessEntry 6 }
|
|
|
|
|
|
-- VLAN IGMP Snoop Sender Table
|
|
|
|
rcVlanIgmpSnoopSenderTable OBJECT-TYPE --excluded
|
|
SYNTAX SEQUENCE OF RcVlanIgmpSnoopSenderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "The (conceptual) table listing the IP multicast
|
|
groups for which there are members on a particular
|
|
interface on a particular VLAN (i.e., a list
|
|
known multicast senders).
|
|
|
|
A row is created by the system when it receives
|
|
an IGMP Join messages on a port."
|
|
::= { rcVlan 9 }
|
|
|
|
rcVlanIgmpSnoopSenderEntry OBJECT-TYPE
|
|
SYNTAX RcVlanIgmpSnoopSenderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry (row) in the rcVlanIgmpSnoopSenderTable."
|
|
INDEX { rcVlanIgmpSnoopSenderVlanId,
|
|
rcVlanIgmpSnoopSenderIpAddress,
|
|
rcVlanIgmpSnoopSenderIfIndex,
|
|
rcVlanIgmpSnoopSenderMember }
|
|
::= { rcVlanIgmpSnoopSenderTable 1 }
|
|
|
|
|
|
RcVlanIgmpSnoopSenderEntry ::= SEQUENCE {
|
|
rcVlanIgmpSnoopSenderVlanId RcVlanIdOrNone,
|
|
rcVlanIgmpSnoopSenderIpAddress IpAddress,
|
|
rcVlanIgmpSnoopSenderIfIndex InterfaceIndex,
|
|
rcVlanIgmpSnoopSenderMember IpAddress,
|
|
rcVlanIgmpSnoopSenderAction INTEGER
|
|
}
|
|
|
|
rcVlanIgmpSnoopSenderVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The VLAN for which this entry contains information."
|
|
::= { rcVlanIgmpSnoopSenderEntry 1 }
|
|
|
|
rcVlanIgmpSnoopSenderIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The IP multicast group address for which this
|
|
entry contains information."
|
|
::= { rcVlanIgmpSnoopSenderEntry 2 }
|
|
|
|
rcVlanIgmpSnoopSenderIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The interface for which this entry contains
|
|
information for this IP multicast group address
|
|
(i.e., the port the multicast traffic was received)."
|
|
::= { rcVlanIgmpSnoopSenderEntry 3 }
|
|
|
|
rcVlanIgmpSnoopSenderMember OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The IP Address of the host sending the multicast
|
|
traffic."
|
|
::= { rcVlanIgmpSnoopSenderEntry 4 }
|
|
|
|
rcVlanIgmpSnoopSenderAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
flushEntry(1),
|
|
flushGrp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to specify an action to perform on this group."
|
|
::= { rcVlanIgmpSnoopSenderEntry 5 }
|
|
|
|
-- Vlan Loop Detected Table
|
|
|
|
rcVlanLoopDetectedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanLoopDetectedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of Vlans the port belongs to
|
|
and the
|
|
corresponding loop detected status."
|
|
::= { rcVlan 10 }
|
|
|
|
rcVlanLoopDetectedEntry OBJECT-TYPE
|
|
SYNTAX RcVlanLoopDetectedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Loop-Detected Entry."
|
|
INDEX { rcVlanLoopDetectedPortIndex, rcVlanLoopDetectedVlanId }
|
|
::= { rcVlanLoopDetectedTable 1 }
|
|
|
|
RcVlanLoopDetectedEntry ::= SEQUENCE {
|
|
rcVlanLoopDetectedPortIndex Integer32,
|
|
rcVlanLoopDetectedVlanId Integer32,
|
|
rcVlanLoopDetectedValue INTEGER
|
|
}
|
|
|
|
rcVlanLoopDetectedPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Number."
|
|
::= { rcVlanLoopDetectedEntry 1 }
|
|
|
|
rcVlanLoopDetectedVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Gives the VlanId to which the port belongs."
|
|
::= { rcVlanLoopDetectedEntry 2 }
|
|
|
|
rcVlanLoopDetectedValue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0), -- loop not detected
|
|
yes(1) -- loop detected
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Gives the Loop Detected status of the port
|
|
in a vlan."
|
|
DEFVAL { no }
|
|
::= { rcVlanLoopDetectedEntry 3 }
|
|
|
|
|
|
-- Vlan Dsap Ssap Table
|
|
|
|
rcVlanDsapSsapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanDsapSsapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain DSAP/SSAP values
|
|
assigned to a sna802dot2 or userdefined vlan."
|
|
::= { rcVlan 11 }
|
|
|
|
rcVlanDsapSsapEntry OBJECT-TYPE
|
|
SYNTAX RcVlanDsapSsapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the rcVlanDsapSsap table."
|
|
INDEX { rcVlanDsapSsapVlanId, rcVlanDsapSsapPid }
|
|
::= { rcVlanDsapSsapTable 1 }
|
|
|
|
RcVlanDsapSsapEntry ::= SEQUENCE {
|
|
rcVlanDsapSsapVlanId Integer32,
|
|
rcVlanDsapSsapPid INTEGER,
|
|
rcVlanDsapSsapRowStatus RowStatus
|
|
}
|
|
|
|
rcVlanDsapSsapVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique index to identify a vlan."
|
|
::= { rcVlanDsapSsapEntry 1 }
|
|
|
|
rcVlanDsapSsapPid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'ffff'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Values of DSAP/SSAP assigned to a particular
|
|
vlan."
|
|
::= { rcVlanDsapSsapEntry 2 }
|
|
|
|
rcVlanDsapSsapRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row Status."
|
|
::= { rcVlanDsapSsapEntry 3 }
|
|
|
|
rcVlanNewLoopDetectedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanNewLoopDetectedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of Vlans the port belongs to and the
|
|
corresponding loop detected status."
|
|
::= { rcVlan 12 }
|
|
|
|
rcVlanNewLoopDetectedEntry OBJECT-TYPE
|
|
SYNTAX RcVlanNewLoopDetectedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Loop-Detected Entry."
|
|
INDEX { rcVlanNewLoopDetectedPortIndex,
|
|
rcVlanNewLoopDetectedVlanId,
|
|
rcVlanNewLoopDetectedMac }
|
|
::= { rcVlanNewLoopDetectedTable 1 }
|
|
|
|
RcVlanNewLoopDetectedEntry ::= SEQUENCE {
|
|
rcVlanNewLoopDetectedPortIndex InterfaceIndex,
|
|
rcVlanNewLoopDetectedVlanId Integer32,
|
|
rcVlanNewLoopDetectedMac MacAddress,
|
|
rcVlanNewLoopDetectedAction INTEGER,
|
|
rcVlanNewLoopDetectedSmltRemote TruthValue
|
|
}
|
|
|
|
rcVlanNewLoopDetectedPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Number."
|
|
::= { rcVlanNewLoopDetectedEntry 1 }
|
|
|
|
rcVlanNewLoopDetectedVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Gives the VlanId to which the port belongs."
|
|
::= { rcVlanNewLoopDetectedEntry 2 }
|
|
|
|
rcVlanNewLoopDetectedMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mac address"
|
|
::= {rcVlanNewLoopDetectedEntry 3}
|
|
|
|
rcVlanNewLoopDetectedAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
portDown(1),
|
|
vlanBlock(2),
|
|
macDiscard(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value is used to specify the action which
|
|
needs to be taken once a loop is detected on a
|
|
specific port."
|
|
DEFVAL { portDown }
|
|
::= { rcVlanNewLoopDetectedEntry 4 }
|
|
|
|
rcVlanNewLoopDetectedSmltRemote OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A MAC address indicate for remote learnt,
|
|
either local or remote."
|
|
::= { rcVlanNewLoopDetectedEntry 5 }
|
|
|
|
-- VLAN MAC Record Delete
|
|
|
|
rcVlanClearMacRecordTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanClearMacRecordEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table used to clear a Vlan MAC Record."
|
|
::= { rcVlan 17 }
|
|
|
|
rcVlanClearMacRecordEntry OBJECT-TYPE
|
|
SYNTAX RcVlanClearMacRecordEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan Clear Mac Record Table Entry"
|
|
INDEX { rcVlanClearMacRecordAddr }
|
|
::= { rcVlanClearMacRecordTable 1 }
|
|
|
|
RcVlanClearMacRecordEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcVlanClearMacRecordAddr MacAddress,
|
|
rcVlanClearMacRecordVlanId INTEGER,
|
|
rcVlanClearMacRecordAllVlanIds TruthValue,
|
|
rcVlanClearMacRecordForceDelete TruthValue,
|
|
rcVlanClearMacRecordLCForceDelete TruthValue
|
|
}
|
|
|
|
rcVlanClearMacRecordAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mac Address that needs to be cleared."
|
|
::= { rcVlanClearMacRecordEntry 1 }
|
|
|
|
rcVlanClearMacRecordVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id where the Mac record has to be cleared."
|
|
::= { rcVlanClearMacRecordEntry 2 }
|
|
|
|
rcVlanClearMacRecordAllVlanIds OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When set to true, this will clear the MAC
|
|
record on all the Vlan Ids it exists."
|
|
DEFVAL { false }
|
|
::= { rcVlanClearMacRecordEntry 3 }
|
|
|
|
rcVlanClearMacRecordForceDelete OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "By default, when ForceDelete is set to false,
|
|
MAC record will not be cleared if an ARP record
|
|
is associated with this Mac Address. If ForceDelete
|
|
is set to True, MAC record will be removed even
|
|
when an ARP is associated with this record."
|
|
DEFVAL { false }
|
|
::= { rcVlanClearMacRecordEntry 4 }
|
|
|
|
rcVlanClearMacRecordLCForceDelete OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "By default, when LCForceDelete (Line Card Force
|
|
Delete) is set to false, if the MAC record is not
|
|
found on the CP, then no message will be sent to
|
|
the line-card. When LCForceDelete is set to true,
|
|
a message will be sent to the line-card even when
|
|
the MAC record is not found on the CP."
|
|
DEFVAL { false }
|
|
::= { rcVlanClearMacRecordEntry 5 }
|
|
|
|
rcVlanNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table that can be used to map the Virtual LAN Id to
|
|
IfIndex and Name for display. It is informational only."
|
|
::= { rcVlan 18 }
|
|
|
|
rcVlanNameEntry OBJECT-TYPE
|
|
SYNTAX RcVlanNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Each entry has mapping information for a
|
|
particular Virtual LAN. This in intended for display
|
|
purposes only."
|
|
INDEX { rcVlanNameVlanId }
|
|
::= { rcVlanNameTable 1 }
|
|
|
|
RcVlanNameEntry ::= SEQUENCE {
|
|
rcVlanNameVlanId RcVlanIdOrNone,
|
|
rcVlanNameVlanName DisplayString,
|
|
rcVlanNameIfIndex InterfaceIndex
|
|
}
|
|
|
|
rcVlanNameVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual LAN
|
|
associated with this entry. This value corresponds
|
|
to the lower 12 bits in the IEEE 802.1Q VLAN Tag."
|
|
::= { rcVlanNameEntry 1 }
|
|
|
|
rcVlanNameVlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The assigned name for this VLAN."
|
|
::= { rcVlanNameEntry 2 }
|
|
|
|
rcVlanNameIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When rcVlanRoutingEnable is set to true(1), this
|
|
value indicates the 'logical' ifIndex assigned to
|
|
this VLAN. Otherwise, this value is meaningless
|
|
and will be set to zero."
|
|
::= { rcVlanNameEntry 3 }
|
|
|
|
-- Vlan Port Spoof Mac detect table
|
|
|
|
rcVlanPortSpoofMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanPortSpoofMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table contains a list of Spoof blocked
|
|
MAC address information."
|
|
::= { rcVlan 19 }
|
|
|
|
rcVlanPortSpoofMacEntry OBJECT-TYPE
|
|
SYNTAX RcVlanPortSpoofMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing a spoof blocked MAC address"
|
|
INDEX { rcVlanPortSpoofMacPortNum,
|
|
rcVlanPortSpoofMacVlanId,
|
|
rcVlanPortSpoofMacIpAddress,
|
|
rcVlanPortSpoofMacMacAddress
|
|
}
|
|
::= { rcVlanPortSpoofMacTable 1 }
|
|
|
|
RcVlanPortSpoofMacEntry ::= SEQUENCE {
|
|
rcVlanPortSpoofMacPortNum InterfaceIndex,
|
|
rcVlanPortSpoofMacVlanId RcVlanIdOrNone,
|
|
rcVlanPortSpoofMacIpAddress IpAddress,
|
|
rcVlanPortSpoofMacMacAddress MacAddress,
|
|
rcVlanPortSpoofMacClearMac TruthValue
|
|
}
|
|
rcVlanPortSpoofMacPortNum OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port interface number of the Spoof detect is enabled.
|
|
Spoof mac is detected "
|
|
::= { rcVlanPortSpoofMacEntry 1 }
|
|
|
|
rcVlanPortSpoofMacVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A vlan entry which the port intreface belong to. And
|
|
the spoof MAC is detected"
|
|
::= { rcVlanPortSpoofMacEntry 2 }
|
|
|
|
rcVlanPortSpoofMacIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A Local Ip address on this interface"
|
|
::= { rcVlanPortSpoofMacEntry 3 }
|
|
|
|
rcVlanPortSpoofMacMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A spoofing Mac address that is detected in this
|
|
interface"
|
|
::= { rcVlanPortSpoofMacEntry 4 }
|
|
|
|
rcVlanPortSpoofMacClearMac OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear/delete this spoof detect mac entry when it is true.
|
|
It always return false when query"
|
|
DEFVAL { false }
|
|
::= { rcVlanPortSpoofMacEntry 5 }
|
|
|
|
|
|
-- Vlan Port Cfm Mep
|
|
|
|
rcVlanPortCfmMepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanPortCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain CFM MEP
|
|
assigned to the port in a vlan"
|
|
::= { rcVlan 13 }
|
|
|
|
rcVlanPortCfmMepEntry OBJECT-TYPE
|
|
SYNTAX RcVlanPortCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the rcVlanPortCfmMep table."
|
|
INDEX { rcVlanPortCfmMepVlanId, rcVlanPortCfmMepPort}
|
|
::= { rcVlanPortCfmMepTable 1 }
|
|
|
|
RcVlanPortCfmMepEntry ::= SEQUENCE {
|
|
rcVlanPortCfmMepVlanId Integer32,
|
|
rcVlanPortCfmMepPort InterfaceIndex,
|
|
rcVlanPortCfmMepMepList OCTET STRING,
|
|
rcVlanPortCfmMepNumOfMep Integer32,
|
|
rcVlanPortCfmMepRowStatus RowStatus
|
|
}
|
|
|
|
rcVlanPortCfmMepVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique index to identify a vlan."
|
|
::= { rcVlanPortCfmMepEntry 1 }
|
|
|
|
rcVlanPortCfmMepPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique index to identify a port interface
|
|
in a Vlan."
|
|
::= { rcVlanPortCfmMepEntry 2 }
|
|
|
|
rcVlanPortCfmMepMepList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..440))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "List of Meps assigned to this entry.
|
|
A mep is consist of <md>.<ma>.<mep_id>. Domain
|
|
Name, Association and Mep Id is separated by '.'
|
|
A list of mep is consist of
|
|
<md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,...
|
|
Each mep is separated by ','. Maximum up 8 meps"
|
|
::= { rcVlanPortCfmMepEntry 3 }
|
|
|
|
rcVlanPortCfmMepNumOfMep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Meps
|
|
is assigned to this entry"
|
|
::= { rcVlanPortCfmMepEntry 4 }
|
|
|
|
rcVlanPortCfmMepRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row Create attibute. For perfomace and efficience,
|
|
rcVlanPortCfmMepMepList is required for creation.
|
|
If any Mep is added, entry would be created.
|
|
If all Mep are removed, entry would be deleted"
|
|
::= { rcVlanPortCfmMepEntry 5 }
|
|
|
|
-- Vlan Port Cfm Mip
|
|
|
|
rcVlanPortCfmMipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanPortCfmMipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain CFM MIP
|
|
assigned to the port in a vlan"
|
|
::= { rcVlan 14}
|
|
|
|
rcVlanPortCfmMipEntry OBJECT-TYPE
|
|
SYNTAX RcVlanPortCfmMipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the rcVlanPortCfmMip table."
|
|
INDEX { rcVlanPortCfmMipVlanId, rcVlanPortCfmMipPort}
|
|
::= { rcVlanPortCfmMipTable 1 }
|
|
|
|
RcVlanPortCfmMipEntry ::= SEQUENCE {
|
|
rcVlanPortCfmMipVlanId Integer32,
|
|
rcVlanPortCfmMipPort InterfaceIndex,
|
|
rcVlanPortCfmMipMipList OCTET STRING,
|
|
rcVlanPortCfmMipNumOfMip Integer32,
|
|
rcVlanPortCfmMipRowStatus RowStatus
|
|
}
|
|
|
|
rcVlanPortCfmMipVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique index to identify a vlan."
|
|
::= { rcVlanPortCfmMipEntry 1 }
|
|
|
|
rcVlanPortCfmMipPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique index to identify a port interface
|
|
in a Vlan."
|
|
::= { rcVlanPortCfmMipEntry 2 }
|
|
|
|
rcVlanPortCfmMipMipList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..440))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "List of Mips assigned to this entry.
|
|
A mip is consist of <md>.<mip_id>. Domain
|
|
Name and Mip Id is separated by '.'
|
|
A list of mip is consist of
|
|
<md1>.<mipid1>,<md2>.<mipid2>,...
|
|
Each mip is separated by ','. Maximum up 8 mips"
|
|
::= { rcVlanPortCfmMipEntry 3 }
|
|
|
|
rcVlanPortCfmMipNumOfMip OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Mips
|
|
is assigned to this entry"
|
|
::= { rcVlanPortCfmMipEntry 4 }
|
|
|
|
rcVlanPortCfmMipRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row Create attibute. For perfomace and efficience,
|
|
rcVlanPortCfmMipMipList is required for creation.
|
|
If any Mip is added, entry would be created.
|
|
If all Mip are removed, entry would be deleted"
|
|
::= { rcVlanPortCfmMipEntry 5 }
|
|
|
|
-- Extended Filtering Service Options for Vlan
|
|
|
|
rcVlanExtFilterSvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanExtFilterSvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Extended filtering services per port per Vlans are
|
|
defined in this table"
|
|
::= { rcVlan 15 }
|
|
|
|
rcVlanExtFilterSvcEntry OBJECT-TYPE
|
|
SYNTAX RcVlanExtFilterSvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the extended filtering services.
|
|
Extended filtering services are per port per Vlan."
|
|
INDEX {rcVlanExtFilterSvcVlanId}
|
|
|
|
::= { rcVlanExtFilterSvcTable 1 }
|
|
|
|
RcVlanExtFilterSvcEntry ::=
|
|
SEQUENCE {
|
|
rcVlanExtFilterSvcVlanId Integer32,
|
|
rcVlanExtFilterSvcFwdAllPorts PortSet,
|
|
rcVlanExtFilterSvcFwdUnregPorts PortSet,
|
|
rcVlanExtFilterSvcFilterUnregPorts PortSet
|
|
}
|
|
|
|
rcVlanExtFilterSvcVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual LAN
|
|
associated with this entry. This value corresponds
|
|
to the lower 12 bits in the IEEE 802.1Q VLAN Tag."
|
|
::= { rcVlanExtFilterSvcEntry 1 }
|
|
|
|
rcVlanExtFilterSvcFwdAllPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Contains port list that are in ForwardAll mode."
|
|
::= { rcVlanExtFilterSvcEntry 2 }
|
|
|
|
rcVlanExtFilterSvcFwdUnregPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Contains port list that are in Forward Unregistered mode."
|
|
::= { rcVlanExtFilterSvcEntry 3 }
|
|
|
|
rcVlanExtFilterSvcFilterUnregPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Contains port list that are in Filter Unregistered mode."
|
|
::= { rcVlanExtFilterSvcEntry 4 }
|
|
|
|
|
|
-- PHYSICAL Elements
|
|
|
|
rcChasType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1), -- unknown chassis
|
|
-- Passport 1000 Types
|
|
a1100(2), -- 3 slot chassis (1/2, 1/2, full)
|
|
a1250(6), -- 4 slot chassis (full, ... , full)
|
|
a1150(7), -- 3 slot chassis (1/2, 1/2, full)
|
|
a1200(8), -- 8 slot chassis (full, ... , full)
|
|
a1050(9), -- 2 slot chassis (seahawk)
|
|
-- Passport 8000 Types
|
|
a8006(280887558), -- 6 slot chassis (raptillion)
|
|
a8010(280887562), -- 10 slot chassis (raptillion)
|
|
a8010co(1623064842), -- 10 slot Central Office Chassis
|
|
a8003(280887555), -- 3 slot chassis (raptillion)
|
|
a1612G(1086197761), -- 1 slot 12 port cobra (0x40be1001)
|
|
a1624G(1086201857), -- 1 slot 24 port cobra (0x40be2001)
|
|
a1648T(1086210049), -- 1 slot 52 port cobra (0x40be4001)
|
|
a8306(1354629382), -- 6 slot 8300 POE chassis (0x50be0106)
|
|
a8310(1354629386), -- 10 slot 8300 POE chassis (0x50be010a)
|
|
a8011co(1623064843), -- 11 slot Central Office chassis (tripod)
|
|
a8003r(280891651), -- 3 slot chassis MERS-8003-R (Triumph)
|
|
-- Cobalt Blue
|
|
-- Nortel Order#: NTC201CA
|
|
-- Customer Order#: EC1402001
|
|
a9012(1090388736), -- 0100 0000 1111 1110 0000 0011 0000 0000 0x40FE0300
|
|
a9010(1090388737), -- 0100 0000 1111 1110 0000 0011 0000 0001 0x40FE0301
|
|
|
|
-- VSP4K
|
|
a4850GTS(1232273458), -- 0100 1001 0111 0011 0000 0000 0011 0010 0x49730032
|
|
a4850GTSPWRPLUS(1232277554), -- 0100 1001 0111 0011 0001 0000 0011 0010 0x49731032
|
|
a4450GSXPWRPLUS(1231228978), -- 0100 1001 0110 0011 0001 0000 0011 0010 0x49631032
|
|
a4450GTXHTPWRPLUS(1232279602), -- 0100 1001 0111 0011 0001 1000 0011 0010 0x49731832
|
|
a4450GSX(1231224882), -- 0100 1001 0110 0011 0000 0000 0011 0010 0x49630032
|
|
-- VSP8K
|
|
a8284XSQ(1331822677), -- 0100 1111 0110 0010 0000 0000 0101 0101 0x4f620055
|
|
a8404C(1331839489), -- 0100 1111 0110 0010 0100 0010 0000 0001 0x4f624201
|
|
a8404(1331823105), -- 0100 1111 0110 0010 0000 0010 0000 0001 0x4f620201
|
|
-- VSP7K
|
|
a7254XSQ(1331855415), -- 0100 1111 0110 0010 1000 0000 0011 0111 0x4f628037
|
|
a7254XTQ(1332903991), -- 0100 1111 0111 0010 1000 0000 0011 0111 0x4f728037
|
|
-- APLS
|
|
aDSG6248(1232274482), -- 0100 1001 0111 0011 0000 0100 0011 0010 (0x49730432)
|
|
aDSG6248P(1232278578), -- 0100 1001 0111 0011 0001 0100 0011 0010 (0x49731432)
|
|
aDSG6248CFP(1231230002), -- 0100 1001 0110 0011 0001 0100 0011 0010 (0x49631432)
|
|
aDSG7648(1331856439), -- 0100 1111 0110 0010 1000 0100 0011 0111 (0x4f628437)
|
|
aDSG7648C(1332905015), -- 0100 1111 0111 0010 1000 0100 0011 0111 (0x4f728437)
|
|
aDSG7480(1331823701), -- 0100 1111 0110 0010 0000 0100 0101 0101 (0x4f620455)
|
|
aDSG8032(929170433), -- 0011 0111 0110 0010 0000 0100 0000 0001 (0x37620401)
|
|
aDSG9032(1063392257), -- 0011 1111 0110 0010 0001 0100 0000 0001 (0x3f621401)
|
|
aDSG8064(1063388161), -- 0011 1111 0110 0010 0000 0100 0000 0001 (0x3f620401)
|
|
--VSP9400: Tsunami
|
|
a8608(1425195264) -- 0101 0100 1111 0010 1100 0001 0000 0000 (0x54f2c100)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Chassis Type"
|
|
::= { rcChassis 1 }
|
|
|
|
rcChasSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Unique serial number for this chassis."
|
|
::= { rcChassis 2 }
|
|
|
|
rcChasHardwareRevision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Device hardware revision level"
|
|
::= { rcChassis 3 }
|
|
|
|
rcChasNumSlots OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of slots in the chassis available for
|
|
plug-in cards."
|
|
::= { rcChassis 4 }
|
|
|
|
rcChasNumPorts OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of ports currently installed in
|
|
the chassis."
|
|
::= { rcChassis 5 }
|
|
|
|
-- TBD FIXME : We need to get the final list from Hardware
|
|
rcChasTestResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
ok(2),
|
|
crceeprom(3),
|
|
timer(4),
|
|
procdram(5),
|
|
led(6),
|
|
formaccpuaccess(7),
|
|
asiccpuaccess(8),
|
|
memory(9),
|
|
loopback(10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Chassis start-up diagnostic tests."
|
|
::= { rcChassis 6 }
|
|
|
|
rcChasFan OBJECT IDENTIFIER ::= { rcChassis 7 }
|
|
|
|
rcChasFanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcChasFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains information about Fans"
|
|
::= { rcChasFan 1 }
|
|
|
|
rcChasFanEntry OBJECT-TYPE
|
|
SYNTAX RcChasFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding a Fan Unit"
|
|
INDEX { rcChasFanId }
|
|
::= { rcChasFanTable 1 }
|
|
|
|
RcChasFanEntry ::=
|
|
SEQUENCE {
|
|
rcChasFanId INTEGER,
|
|
rcChasFanOperStatus INTEGER,
|
|
rcChasFanAmbientTemperature Gauge32,
|
|
rcChasFanType INTEGER,
|
|
rcChasFanFlowType INTEGER
|
|
}
|
|
|
|
rcChasFanId OBJECT-TYPE
|
|
SYNTAX INTEGER(1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The chassis fan Id."
|
|
::= { rcChasFanEntry 1 }
|
|
|
|
rcChasFanOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
up(2),
|
|
down(3),
|
|
notpresent(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Actual status of the Fan:
|
|
- unknown(1) - status can not be determined.
|
|
- up(2) - present and supplying power.
|
|
- down(3) - present, but failure indicated."
|
|
::= { rcChasFanEntry 2 }
|
|
|
|
rcChasFanAmbientTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the temperature in celsius of the air
|
|
entering the fan."
|
|
::= { rcChasFanEntry 3 }
|
|
|
|
rcChasFanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
regularSpeed(2),
|
|
highSpeed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Type of the Fan:
|
|
- unknown(1) - type can not be determined.
|
|
- regularSpeed(2) - regular speed fan is present.
|
|
- highSpeed(3) - high speed fan is present."
|
|
::= { rcChasFanEntry 4 }
|
|
|
|
rcChasFanFlowType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
frontToBack(2),
|
|
backToFront(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Direction of the Fan Flow:
|
|
- unknown(1) - Flow can not be determined.
|
|
- fronttoback(2) - Front to back flow.
|
|
- backtofront(3) - Back to front flow."
|
|
::= { rcChasFanEntry 5 }
|
|
|
|
|
|
rcChasFanZoneTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcChasFanZoneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for the zones available on the chassis"
|
|
::= { rcChasFan 2 }
|
|
|
|
rcChasFanZoneEntry OBJECT-TYPE
|
|
SYNTAX RcChasFanZoneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding a zone unit"
|
|
INDEX { rcChasFanZoneType }
|
|
::= { rcChasFanZoneTable 1 }
|
|
|
|
RcChasFanZoneEntry ::=
|
|
SEQUENCE {
|
|
rcChasFanZoneType INTEGER,
|
|
rcChasFanZoneMode INTEGER,
|
|
rcChasFanZoneModeStatus BITS,
|
|
rcChasFanZoneAlarmTimer Integer32,
|
|
rcChasFanZoneTemperature Gauge32,
|
|
rcChasFanZoneTray1LedColor INTEGER,
|
|
rcChasFanZoneTray2LedColor INTEGER,
|
|
rcChasFanZoneFPGATemperature Integer32,
|
|
rcChasFanZoneFATemperature Integer32
|
|
}
|
|
|
|
rcChasFanZoneType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
front(1),
|
|
rear(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Type of the fan zone."
|
|
::= { rcChasFanZoneEntry 1 }
|
|
|
|
rcChasFanZoneMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
alarm(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Functional mode of the fan zone."
|
|
::= { rcChasFanZoneEntry 2 }
|
|
|
|
rcChasFanZoneModeStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
normal(0),
|
|
fanFault(1),
|
|
alarmThresholdExceeded(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bit set indicates the alarm type(s)"
|
|
::= { rcChasFanZoneEntry 3 }
|
|
|
|
rcChasFanZoneAlarmTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
DESCRIPTION "Alarm timer indicates the remaining time before
|
|
system checks and shutdown module when fan is in
|
|
the alarm state. Zero means the fan i snot in an
|
|
alarm state"
|
|
::= { rcChasFanZoneEntry 4 }
|
|
|
|
rcChasFanZoneTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Highest temperature measured in celsius degree
|
|
from all the sensors (inlet and outlet) in the zone"
|
|
::= { rcChasFanZoneEntry 5 }
|
|
|
|
rcChasFanZoneTray1LedColor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
green(2),
|
|
red(3),
|
|
amber(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Led color indicate fans operation status on tray
|
|
off: Indicates no tray or power off.
|
|
green: Indicates all fans are operational in a tray.
|
|
red: Front Zone Tray: more than one fans in a tray are not opertional.
|
|
Rear Zone Tray: one of two or both fans fans in a tray are not operational.
|
|
amber: Front Zone Tray: one of eight fans is not operational.
|
|
Rear Zone Tray: It is not applicable for Rear Zone tray"
|
|
|
|
::= { rcChasFanZoneEntry 6 }
|
|
|
|
rcChasFanZoneTray2LedColor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
green(2),
|
|
red(3),
|
|
amber(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Led color indicate fans operation status on tray
|
|
off: Indicates no tray or power off.
|
|
green: Indicates all fans are operational in a tray.
|
|
red: Front Zone Tray: more than one fans in a tray are not opertional.
|
|
Rear Zone Tray: one of two fans or both fans in a tray are not operational.
|
|
amber: Front Zone Tray: one of eight fans is not operational.
|
|
Rear Zone Tray: It is not applicable for Rear Zone tray"
|
|
::= { rcChasFanZoneEntry 7 }
|
|
|
|
rcChasFanZoneFPGATemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Highest FPGA temperature measured in celsius degree
|
|
from all the FPGA sensors in the zone. FPGA sensors
|
|
are only available on the RoF cards. Hence this is
|
|
applicable only for the front zone.
|
|
A value of 0 for this mib object indicates that this
|
|
is not applicable."
|
|
::= { rcChasFanZoneEntry 8 }
|
|
|
|
rcChasFanZoneFATemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Highest FA temperature measured in celsius degree
|
|
from all the FA sensors in the zone. FA sensors
|
|
are only available on the RoF cards. Hence this is
|
|
applicable only for the front zone.
|
|
A value of 0 for this mib object indicates that this
|
|
is not applicable."
|
|
::= { rcChasFanZoneEntry 9 }
|
|
|
|
rcChasFanInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcChasFanInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains information for
|
|
all the fans on the chassis"
|
|
::= { rcChasFan 3 }
|
|
|
|
rcChasFanInfoEntry OBJECT-TYPE
|
|
SYNTAX RcChasFanInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding a fan unit"
|
|
INDEX { rcChasFanZoneType, rcChasFanInfoTray, rcChasFanInfoFan }
|
|
::= { rcChasFanInfoTable 1 }
|
|
|
|
RcChasFanInfoEntry ::=
|
|
SEQUENCE {
|
|
rcChasFanInfoTray INTEGER,
|
|
rcChasFanInfoFan INTEGER,
|
|
rcChasFanInfoExpectedSpeed INTEGER,
|
|
rcChasFanInfoOperSpeed INTEGER,
|
|
rcChasFanInfoStatus INTEGER
|
|
}
|
|
|
|
rcChasFanInfoTray OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Number of trays per zone in chassis"
|
|
::= { rcChasFanInfoEntry 1 }
|
|
|
|
rcChasFanInfoFan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Number of fans per tray"
|
|
::= { rcChasFanInfoEntry 2 }
|
|
|
|
rcChasFanInfoExpectedSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
medium(2),
|
|
high(3),
|
|
hardware(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The administrative setting for the fan speed
|
|
low: Low speed set by software
|
|
medium: Medium speed set by software
|
|
high: High speed set by software
|
|
hardware: Speed controlled by hardware"
|
|
::= { rcChasFanInfoEntry 3 }
|
|
|
|
rcChasFanInfoOperSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
medium(2),
|
|
high(3),
|
|
hardware(4),
|
|
error(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Actual speed of the fan"
|
|
::= { rcChasFanInfoEntry 4 }
|
|
|
|
rcChasFanInfoStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
faulty(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operational status of the fan. Details below:
|
|
ok(1): Fan operating under normal condition(s)
|
|
faulty(2): Fan not operating as expected"
|
|
::= { rcChasFanInfoEntry 5 }
|
|
|
|
rcChasPowerSupply OBJECT IDENTIFIER ::= { rcChassis 8 }
|
|
|
|
rcChasPowerSupplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcChasPowerSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains information about power
|
|
supplies."
|
|
::= { rcChasPowerSupply 1 }
|
|
|
|
rcChasPowerSupplyEntry OBJECT-TYPE
|
|
SYNTAX RcChasPowerSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding a power supply
|
|
unit."
|
|
INDEX { rcChasPowerSupplyId }
|
|
::= { rcChasPowerSupplyTable 1 }
|
|
|
|
RcChasPowerSupplyEntry ::=
|
|
SEQUENCE {
|
|
rcChasPowerSupplyId INTEGER,
|
|
rcChasPowerSupplyOperStatus INTEGER
|
|
}
|
|
|
|
rcChasPowerSupplyId OBJECT-TYPE
|
|
SYNTAX INTEGER(1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The power supply Id."
|
|
::= { rcChasPowerSupplyEntry 1 }
|
|
|
|
|
|
rcChasPowerSupplyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
empty(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Actual status of the power supply:
|
|
- unknown(1) - status can not be determined.
|
|
- empty(2) - power supply not installed.
|
|
- up(3) - present and supplying power.
|
|
- down(4) - present, but failure indicated."
|
|
::= { rcChasPowerSupplyEntry 2 }
|
|
|
|
|
|
rcChasPowerSupplyDetailTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcChasPowerSupplyDetailEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains detailed information about
|
|
power supplies."
|
|
::= { rcChasPowerSupply 2 }
|
|
|
|
rcChasPowerSupplyDetailEntry OBJECT-TYPE
|
|
SYNTAX RcChasPowerSupplyDetailEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains detailed info regarding a power supply
|
|
unit."
|
|
INDEX { rcChasPowerSupplyDetailId }
|
|
::= { rcChasPowerSupplyDetailTable 1 }
|
|
|
|
RcChasPowerSupplyDetailEntry ::=
|
|
SEQUENCE {
|
|
rcChasPowerSupplyDetailId INTEGER,
|
|
rcChasPowerSupplyDetailType INTEGER,
|
|
rcChasPowerSupplyDetailSerialNumber DisplayString,
|
|
rcChasPowerSupplyDetailHardwareRevision DisplayString,
|
|
rcChasPowerSupplyDetailPartNumber DisplayString,
|
|
rcChasPowerSupplyDetailDescription DisplayString,
|
|
rcChasPowerSupplyDetailPsePower Integer32,
|
|
rcChasPowerSupplyDetailInputLineVoltage INTEGER,
|
|
rcChasPowerSupplyDetailOperLineVoltage INTEGER,
|
|
rcChasPowerSupplyDetailOutputWatts Integer32,
|
|
rcChasPowerSupplyDetailDualAcInput INTEGER,
|
|
rcChasPowerSupplyFanFlowType INTEGER
|
|
}
|
|
|
|
rcChasPowerSupplyDetailId OBJECT-TYPE
|
|
SYNTAX INTEGER(1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The power supply Id."
|
|
::= { rcChasPowerSupplyDetailEntry 1 }
|
|
|
|
rcChasPowerSupplyDetailType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
ac(1),
|
|
dc(2),
|
|
dualAc(3),
|
|
poe(278798592) , -- 8300 110/200 V AC/DC PoE(0x109e2100)
|
|
poe1400WPS(278802688), -- 8300 110/200 V 850W/1400W AC/DC PoE(0x109e3100)
|
|
dc8005(277876736) -- 8005 1462W 48/60V DC Power Supply(0x10901000)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The power supply type."
|
|
::= { rcChasPowerSupplyDetailEntry 2 }
|
|
|
|
rcChasPowerSupplyDetailSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The power supply serial number."
|
|
::= { rcChasPowerSupplyDetailEntry 3 }
|
|
|
|
rcChasPowerSupplyDetailHardwareRevision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The hardware revision of the power supply."
|
|
::= { rcChasPowerSupplyDetailEntry 4 }
|
|
|
|
rcChasPowerSupplyDetailPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The power supply part number."
|
|
::= { rcChasPowerSupplyDetailEntry 5 }
|
|
|
|
rcChasPowerSupplyDetailDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The detail description of power supply."
|
|
::= { rcChasPowerSupplyDetailEntry 6 }
|
|
|
|
rcChasPowerSupplyDetailPsePower OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The nominal power of the PSE expressed in Watts."
|
|
::= { rcChasPowerSupplyDetailEntry 7 }
|
|
|
|
rcChasPowerSupplyDetailInputLineVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
low110v(1),
|
|
high220v(2),
|
|
minus48v(3),
|
|
ac110vOr220v(4),
|
|
dc(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The power supply Input Line voltage."
|
|
::= { rcChasPowerSupplyDetailEntry 8 }
|
|
|
|
rcChasPowerSupplyDetailOperLineVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
low110v(1),
|
|
high220v(2),
|
|
minus48v(3),
|
|
ac110vOr220v(4),
|
|
dc(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The power supply Line voltage considered for
|
|
Power Management calculation."
|
|
::= { rcChasPowerSupplyDetailEntry 9 }
|
|
|
|
rcChasPowerSupplyDetailOutputWatts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The output power of this power supply"
|
|
::= { rcChasPowerSupplyDetailEntry 10 }
|
|
|
|
rcChasPowerSupplyDetailDualAcInput OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
line1(1),
|
|
line2(2),
|
|
both(3),
|
|
none(4),
|
|
notApplicable(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The dual input power supply has two input AC lines.
|
|
This Mib defines which of those AC lines are supplying power.
|
|
For a single input power supply this Mib will be set to notApplicable(5)"
|
|
DEFVAL {5}
|
|
::= { rcChasPowerSupplyDetailEntry 11}
|
|
|
|
rcChasPowerSupplyFanFlowType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
frontToback(1),
|
|
backTofront(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The power supply Fan Flow Type."
|
|
::= { rcChasPowerSupplyDetailEntry 12 }
|
|
|
|
rcCard OBJECT IDENTIFIER ::= { rcChassis 9 }
|
|
|
|
rcCardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table that contains information about the
|
|
cards in this chassis. For those slots that
|
|
do not contain a physical card, the table may
|
|
be implemented to contain a conceptual row
|
|
with the type of physical module set to
|
|
'chasCardEmpty', or it may be implemented to
|
|
have no conceptual row instance."
|
|
::= { rcCard 1 }
|
|
|
|
rcCardEntry OBJECT-TYPE
|
|
SYNTAX RcCardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Card attributes"
|
|
INDEX { rcCardIndex }
|
|
::= { rcCardTable 1 }
|
|
|
|
RcCardEntry ::=
|
|
SEQUENCE {
|
|
rcCardIndex INTEGER,
|
|
rcCardType INTEGER,
|
|
rcCardSerialNumber DisplayString,
|
|
rcCardHardwareRevision DisplayString,
|
|
rcCardAdminStatus INTEGER,
|
|
rcCardOperStatus INTEGER,
|
|
rcCardPCMCIAType INTEGER,
|
|
rcCardPartNumber DisplayString,
|
|
rcCardOxateCpld DisplayString,
|
|
rcCardOxideFpga DisplayString,
|
|
rcCardCatskillFpga DisplayString,
|
|
rcCardQE DisplayString,
|
|
rcCardK2Fpga DisplayString,
|
|
rcCardIoDateDC DisplayString,
|
|
rcCardIoDateBB DisplayString,
|
|
rcCardIoPimCpld DisplayString,
|
|
rcCardLed0Cpld DisplayString,
|
|
rcCardLed1Cpld DisplayString,
|
|
rcCardZagrosFpga DisplayString,
|
|
rcCardRsp DisplayString,
|
|
rcCardBcmMac DisplayString,
|
|
rcCardPhosphideFpga DisplayString,
|
|
rcCardSulfideFpga DisplayString,
|
|
rcCardFluorateCpld DisplayString,
|
|
rcCardBme DisplayString
|
|
}
|
|
|
|
rcCardIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..26)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A unique value for each module within the chassis.
|
|
This value is determined by the chassis slot number
|
|
where the module is inserted. Valid entries are 1
|
|
to the value of rcChasNumSlots"
|
|
::= { rcCardEntry 1 }
|
|
|
|
rcCardType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1), -- no card installed
|
|
rcCPU(2), -- [1200] CPU Card (A1200)
|
|
rc8x100BaseTX(3), -- [1208TX] 8 port (cat 5) (A1200)
|
|
rc8x100BaseT2(4), -- [] 8 port (cat 3) (A1200)
|
|
rc8x100BaseF(5), -- [1208FX] 8 port fiber (A1200)
|
|
rc16x100BaseTX(6), -- [1216TX] 16 port (cat 5) (A1200)
|
|
rc8x100BaseTXWG(12), -- [1108TX] 8 port (half width) (A1100)
|
|
rc16x100BaseTXWG(13), -- [1100] 16 port + CPU (A1100)
|
|
rc4x100BaseFWG(14), -- [1104FX] 4 port (half width) (A1100)
|
|
rc12x100BaseTXWG(15), -- [1050] 12 port + CPU (A1050)
|
|
rc12x100BaseFBB(16), -- [] 12 port (A1200)
|
|
rc8x100BaseFWG(17), -- [1108FX] 8 port (A1100)
|
|
rc12x100BaseTX-2x100BaseFBB(18), -- [] 12 port + 2 port (A1200)
|
|
rc2x155BaseFBB(19), -- [] 2 sonet port (A1200)
|
|
rc4x155BaseFBB(20), -- [] 4 sonet port (A1200)
|
|
rc16x100BaseFBB(21), -- [1216FX] 16 port fiber (A1200)
|
|
rc14x100BaseTX-2x100BaseFBB(22), -- [1216TF] 14 port + 2 port (A1200)
|
|
rc8x10BaseFBB(23), -- [1208FL] 8 port fiber low-speed (A1200)
|
|
rc4xOC3(24), -- [1200xx] 4 port OC3 (A1200)
|
|
rc1xOC12(25), -- [1200xx] 1 port OC12 (A1200)
|
|
rcRMON(26), -- [1200xx] RMON (A1200)
|
|
rc1xOC12POSBaseMMF(27), -- [1200xx] 1 port OC12 POS (A1200)
|
|
rc1xOC12POSBaseSMF(28), -- [1200xx] 1 port OC12 POS (A1200)
|
|
rc4x1000BaseSXWG(1028), -- [1150] 1 0 00 000 0100 + CPU (A1150)
|
|
rc1x1000BaseSXWG(1025), -- [1101SX] 1 0 00 000 0001
|
|
rc2x1000BaseSXWG(1026), -- [1102SX] 1 0 00 000 0010
|
|
rc1x1000BaseSXRWG(1537), -- [1101SR] 1 1 00 000 0001
|
|
rc2x1000BaseSXRWG(1538), -- [1102SR] 1 1 00 000 0010
|
|
rc1x1000BaseLXWG(1153), -- [1101LX] 1 0 01 000 0001
|
|
rc2x1000BaseLXWG(1154), -- [1102LX] 1 0 01 000 0010
|
|
rc2x1000BaseXDWG(1282), -- [1102XD] 1 0 10 000 0010
|
|
rc1x1000BaseLXRWG(1665), -- [1101LR] 1 1 01 000 0001
|
|
rc2x1000BaseLXRWG(1666), -- [1102LR] 1 1 01 000 0010
|
|
rc1x1000BaseSXBB(1041), -- [1201SX] 1 0 00 001 0001
|
|
rc2x1000BaseSXBB(1042), -- [1202SX] 1 0 00 001 0010
|
|
rc1x1000BaseSXRBB(1553), -- [1201SR] 1 1 00 001 0001
|
|
rc2x1000BaseSXRBB(1554), -- [1202SR] 1 1 00 001 0010
|
|
rc1x1000BaseLXBB(1169), -- [1201LX] 1 0 01 001 0001
|
|
rc2x1000BaseLXBB(1170), -- [1202LX] 1 0 01 001 0010
|
|
rc2x1000BaseXDBB(1298), -- [1202XD] 1 0 10 001 0010
|
|
rc1x1000BaseLXRBB(1681), -- [1201LR] 1 1 01 001 0001
|
|
rc2x1000BaseLXRBB(1682), -- [1202LR] 1 1 01 001 0010
|
|
-- Cobalt Blue: if you change here, you MUST update rc2kCardFrontType in rc2kCardTable
|
|
cbMidplane-28(1090388736), -- 0100 0000 1111 1110 0000 0011 0000 0000 0x40FE0300
|
|
cbMidplaneSapphire(1090396928), -- 0100 0000 1111 1110 0010 0011 0000 0000 0x40FE2300
|
|
cbACPowerSupply(1084097280), -- 0100 0000 1001 1110 0000 0011 0000 0000 0x409E0300
|
|
cbACPowerPlusSupply(1084130048), -- 0100 0000 1001 1110 1000 0011 0000 0000 0x409E8300
|
|
cbCPFanTray(1085145856), -- 0100 0000 1010 1110 0000 0011 0000 0000 0x40AE0300
|
|
cbIOFanTray(1085149952), -- 0100 0000 1010 1110 0001 0011 0000 0000 0x40AE1300
|
|
cbFanTray(1085154048), -- 0100 0000 1010 1110 0010 0011 0000 0000 0x40AE2300
|
|
cbHSFanTray(1085158144), -- 0100 0000 1010 1110 0011 0011 0000 0000 0x40AE3300
|
|
cbAUX(1091437312), -- 0100 0001 0000 1110 0000 0011 0000 0000 0x410E0300
|
|
cbSF3200(1075708672), -- 0100 0000 0001 1110 0000 0011 0000 0000 0x401E0300
|
|
cbSF9600(1075712768), -- 0100 0000 0001 1110 0001 0011 0000 0000 0x401E1300
|
|
cbSF9610(1075716864), -- 0100 0000 0001 1110 0010 0011 0000 0000 0x401E2300
|
|
cbCP-CSC(1073873665), -- 0100 0000 0000 0010 0000 0011 0000 0001 0x40020301
|
|
cb48x1000BaseTX(1075970864), -- 0100 0000 0010 0010 0000 0011 0011 0000 0x40220330
|
|
cb48x1000BaseTXPOE(1075974960), -- 0100 0000 0010 0010 0001 0011 0011 0000 0x40221330
|
|
cb48x1000SFP(1077044016), -- 0100 0000 0011 0010 0110 0011 0011 0000 0x40326330
|
|
cb24x10GBaseSFP(1077109528), -- 0100 0000 0011 0011 0110 0011 0001 1000 0x40336318
|
|
cb48x10GBaseSFP(1077109552), -- 0100 0000 0011 0011 0110 0011 0011 0000 0x40336330
|
|
-- Future CB Cards
|
|
-- cbOPM(1087243008) 0x40CE0300
|
|
-- cbSAS(1087247104) 0x40CE1300
|
|
-- cbIPFIX(1087251200) 0x40CE2300
|
|
-- VSP4K card definitions
|
|
vsp4k4850GTS(1232273458), -- 0100 1001 0111 0011 0000 0000 0011 0010 0x49730032
|
|
vsp4k4850GTSPWRPLUS(1232277554), -- 0100 1001 0111 0011 0001 0000 0011 0010 0x49731032
|
|
vsp8k8242XSQ(1298407466), -- 0100 1101 0110 0100 0010 0000 0010 1010 0x4d64202a
|
|
vsp4k4450GSXPWRPLUS(1231228978), -- 0100 1001 0110 0011 0001 0000 0011 0010 0x49731032
|
|
vsp4k4450GTXHTPWRPLUS(1232279602), -- 0100 1001 0111 0011 0001 1000 0011 0010 0x49731832
|
|
|
|
vsp8k8424XS(1298379288), -- 0100 1101 0110 0011 1011 0010 0001 1000 0x4d63b218
|
|
vsp4k4450GSX(1231224882), -- 0100 1001 0110 0011 0000 0000 0011 0010 0x49630032
|
|
|
|
-- CB generation 2 (ROF) linecards
|
|
rof48x1000SFP(1144152880), -- 0100 0100 0011 0010 0110 0011 0011 0000 0x44326330
|
|
rofLoadBoard(1144152832), -- 0100 0100 0011 0010 0110 0011 0000 0000 0x44326300
|
|
rof16x10GBaseSFP(1144218384), -- 0100 0100 0011 0011 0110 0011 0001 0000 0x44336310
|
|
rof48x10GBaseSFP(1144218416), -- 0100 0100 0011 0011 0110 0011 0011 0000 0x44336330
|
|
rof4x40GBaseSFP(1144283920), -- 0100 0100 0011 0100 0110 0011 0001 0000 0x44346310
|
|
rof12x40GBaseSFP(1144283952) -- 0100 0100 0011 0100 0110 0011 0011 0000 0x44346330
|
|
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the card type. The value returned
|
|
is defined by the description in rc2kCardTable."
|
|
::= { rcCardEntry 2 }
|
|
|
|
rcCardSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Unique serial number for this card."
|
|
::= { rcCardEntry 3 }
|
|
|
|
rcCardHardwareRevision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Hardware Version"
|
|
::= { rcCardEntry 4 }
|
|
|
|
rcCardAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
testing(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the administrative status of this
|
|
card"
|
|
::= { rcCardEntry 5 }
|
|
|
|
rcCardOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
testing(3),
|
|
unknown(4),
|
|
dormant(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the operational status of this card."
|
|
::= { rcCardEntry 6 }
|
|
|
|
rcCardPCMCIAType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
modem28kbs(2),
|
|
flash2meg(3),
|
|
flash4meg(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the type of PCMCIA card currently
|
|
installed in this CPU card, if any.
|
|
|
|
For non-CPU cards, this variable has no meaning and
|
|
will always be set to none."
|
|
DEFVAL { none }
|
|
::= { rcCardEntry 7 }
|
|
|
|
rcCardPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Card Part Number"
|
|
::= { rcCardEntry 8 }
|
|
|
|
rcCardOxateCpld OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Oxate CPLD version for CP card"
|
|
::= { rcCardEntry 9 }
|
|
|
|
rcCardOxideFpga OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Oxide FGPA version for CP card"
|
|
::= { rcCardEntry 10 }
|
|
|
|
rcCardCatskillFpga OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Catskill FPGA version for CP card"
|
|
::= { rcCardEntry 11 }
|
|
|
|
rcCardQE OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "QE version for CP card"
|
|
::= { rcCardEntry 12 }
|
|
|
|
rcCardK2Fpga OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "K2 FPGA version for IO card"
|
|
::= { rcCardEntry 13 }
|
|
|
|
rcCardIoDateDC OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IO Date DC CPLD for IO card"
|
|
::= { rcCardEntry 14 }
|
|
|
|
rcCardIoDateBB OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IO Date BaseBoard CPLD for IO card"
|
|
::= { rcCardEntry 15 }
|
|
|
|
rcCardIoPimCpld OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IO PIM CPLD for IO card"
|
|
::= { rcCardEntry 16 }
|
|
|
|
rcCardLed0Cpld OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LED0 CPLD for IO card"
|
|
::= { rcCardEntry 17 }
|
|
|
|
rcCardLed1Cpld OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LED1 CPLD for IO card"
|
|
::= { rcCardEntry 18 }
|
|
|
|
rcCardZagrosFpga OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Zagros FPGA for IO card"
|
|
::= { rcCardEntry 19 }
|
|
|
|
rcCardRsp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RSP for IO card"
|
|
::= { rcCardEntry 20 }
|
|
|
|
rcCardBcmMac OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BCM Mac for IO card"
|
|
::= { rcCardEntry 21 }
|
|
|
|
rcCardPhosphideFpga OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Phosphide FPGA for IO card"
|
|
::= { rcCardEntry 22 }
|
|
|
|
rcCardSulfideFpga OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sulfide FPGA for IO card"
|
|
::= { rcCardEntry 23 }
|
|
|
|
rcCardFluorateCpld OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fluorate Cpld for SF card"
|
|
::= { rcCardEntry 24 }
|
|
|
|
rcCardBme OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BME for SF card"
|
|
::= { rcCardEntry 25 }
|
|
|
|
|
|
-- Port Table
|
|
|
|
rcPort OBJECT IDENTIFIER ::= { rcChassis 10 }
|
|
|
|
rcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port table"
|
|
::= { rcPort 1 }
|
|
|
|
rcPortEntry OBJECT-TYPE
|
|
SYNTAX RcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular port"
|
|
INDEX { rcPortIndex }
|
|
::= { rcPortTable 1 }
|
|
|
|
RcPortEntry ::= SEQUENCE {
|
|
rcPortIndex InterfaceIndex,
|
|
rcPortType INTEGER,
|
|
rcPortConnectorType INTEGER,
|
|
rcPortPerformRouting TruthValue,
|
|
rcPortHighPriority TruthValue, --excluded
|
|
rcPortAction INTEGER,
|
|
rcPortResult INTEGER,
|
|
rcPortPrimaryConnector INTEGER, --excluded
|
|
rcPortActiveConnector INTEGER,
|
|
rcPortBackupConnectorStatus INTEGER,
|
|
rcPortAutoNegotiate TruthValue,
|
|
rcPortAdminDuplex INTEGER,
|
|
rcPortOperDuplex INTEGER,
|
|
rcPortAdminSpeed INTEGER,
|
|
rcPortOperSpeed Integer32,
|
|
rcPortMltId Integer32,
|
|
rcPortLocked TruthValue,
|
|
rcPortAutoNegotiationSupported TruthValue,
|
|
rcPortSingleRoutablePort TruthValue,
|
|
rcPortUnknownMacDiscard TruthValue,
|
|
rcPortNumStateTransition Counter32,
|
|
rcPortAllowOversizeFrame TruthValue, --excluded
|
|
rcPortUserPriority INTEGER, --excluded
|
|
rcPortQosLevel INTEGER,
|
|
rcPortDiffServEnable TruthValue,
|
|
rcPortDiffServType INTEGER,
|
|
rcPortDiffServIeee8021POverrideEnable TruthValue, --excluded
|
|
rcPortVendorDescr DisplayString,
|
|
rcPortName DisplayString,
|
|
rcPortOctapidId Integer32,
|
|
rcPortWan INTEGER,
|
|
rcPortTransport INTEGER,
|
|
rcPortMultimediaFilterEnable TruthValue,
|
|
rcPortMultimediaDevSelection DisplayString,
|
|
-- OM2.0 place holder added following
|
|
rcPortServiceType INTEGER,
|
|
rcPortMode INTEGER,
|
|
rcPortAdminRouting EnableValue,
|
|
rcPortOperRouting EnableValue,
|
|
rcPortPid Integer32,
|
|
-- OID 46 to 49 are being used in 8300 but OID 46 is also used in PR v4.0
|
|
rcPortIeee8021POverrideEnable TruthValue,
|
|
rcPortShaperEnable TruthValue,
|
|
rcPortShaperMaxRate Integer32,
|
|
rcPortShaperBurstSize Integer32,
|
|
rcPortCpLimitShutDown TruthValue,
|
|
rcPortHighSecureEnable TruthValue,
|
|
rcPortTlsPriorityOverride EnableValue,
|
|
rcPortVctAbility INTEGER,
|
|
rcPortVctAdminStatus EnableValue,
|
|
rcPortMrouteStrLimit INTEGER,
|
|
rcPortMrouteStrTimerCheck INTEGER,
|
|
rcPortMrouteStrLimitEnable TruthValue,
|
|
rcPortUpdateDynamicMacQosLevel EnableValue,
|
|
rcPortVplsDualHoming INTEGER,
|
|
rcPortVplsMgmtVlan TruthValue,
|
|
rcPortTlsManagedBySp TruthValue,
|
|
rcPortAutoNegAd BITS,
|
|
rcPortAutoNegAdCapability BITS,
|
|
rcPortAutoRecoverPort TruthValue,
|
|
rcPortExtCplimitConf INTEGER,
|
|
rcPortExtCplimitUtilRate INTEGER,
|
|
rcPortEgressRateLimit INTEGER,
|
|
rcPortEgressRateLimitState EnableValue,
|
|
rcPortBpduFilteringTimerCount TimeInterval,
|
|
rcPortBpduFilteringTimeout TimeInterval,
|
|
rcPortBpduFilteringAdminEnabled TruthValue,
|
|
rcPortBpduFilteringOperEnabled TruthValue,
|
|
rcPortQinqEtherType Integer32,
|
|
rcPortTrustDscp TruthValue,
|
|
rcPortCpLimitEnable EnableValue,
|
|
rcPortCpMulticastLimit INTEGER,
|
|
rcPortCpBroadcastLimit INTEGER,
|
|
rcPortSmartAutoNegotiate TruthValue,
|
|
rcPortMepList OCTET STRING,
|
|
rcPortNumOfMep Integer32,
|
|
rcPortAdacStatus TruthValue,
|
|
rcPortPvid Integer32,
|
|
rcPortTdp EnableValue,
|
|
rcPortIngressRateLimit INTEGER,
|
|
rcPortIngressRateLimitState EnableValue,
|
|
rcPortClockSource INTEGER,
|
|
rcPortVrfIdList IdList,
|
|
rcPortCfmVid Integer32,
|
|
rcPortUserLabel1 DisplayString,
|
|
rcPortUserLabel2 DisplayString,
|
|
rcPortClearCfmStats TruthValue,
|
|
rcPortInterfaceType INTEGER,
|
|
rcPortCfmControlMep DisplayString,
|
|
rcPortMtu Integer32,
|
|
rcPortMtuState EnableValue,
|
|
rcPortVrfNameList OCTET STRING,
|
|
rcPortBrouterVrfId VrfIdentifier,
|
|
rcPortBrouterVrfName DisplayString,
|
|
rcPortVrfCount Counter32,
|
|
rcPortCtrlPktDropLimitEnable EnableValue,
|
|
rcPortCtrlPktDropLimit Integer32,
|
|
rcPortCtrlPktShutdownLimitEnable EnableValue,
|
|
rcPortCtrlPktShutdownLimit Integer32,
|
|
rcPortCtrlPktShutdownRtExceeded TruthValue,
|
|
rcPortCtrlPktDropRtExceeded TruthValue,
|
|
rcPortDhcpOption82SubscriberId DisplayString,
|
|
rcPortServiceCardType INTEGER,
|
|
rcPortIngressRatePeak INTEGER,
|
|
rcPortIngressRateSvc INTEGER,
|
|
rcPortCpLimitPktRate INTEGER,
|
|
rcPortCpLimitShutDownEnable TruthValue,
|
|
rcPortRmonEnable TruthValue,
|
|
rcPortIpsecEnable TruthValue,
|
|
rcPortShutdownReason INTEGER,
|
|
rcPortMdixMode INTEGER,
|
|
rcPortFlexUniEnable TruthValue,
|
|
rcPortBpduGuardTimerCount Integer32,
|
|
rcPortBpduGuardTimeout Integer32,
|
|
rcPortBpduGuardAdminEnabled TruthValue,
|
|
rcPortLicenseControlStatus INTEGER,
|
|
rcPortTxFlowControl TruthValue,
|
|
rcPortTxFlowControlOperState TruthValue
|
|
}
|
|
|
|
rcPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { rcPortEntry 1 }
|
|
|
|
rcPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0), -- no port installed
|
|
rc100BaseTX(1), -- (cat 5)
|
|
rc100BaseT2(2), -- (cat 3)
|
|
rc100BaseF(3), -- (100 mbps fiber)
|
|
rc1000BaseF(4), -- (1000 mbps fiber)
|
|
rc1000BaseDualF(5), -- (fiber - dual connector)
|
|
rc10BaseF(6), -- (10 mbps fiber)
|
|
rcPosMMF(7), -- (multi mode fiber)
|
|
rcPosSMF(8), -- (single mode fiber)
|
|
rcAtm(9), -- (oc3, oc12, ds3, e3)
|
|
rcGbicLx(10), -- (gigabit long haul)
|
|
rcGbicSx(11), -- (gigabit short haul)
|
|
rcGbicXd(12), -- (gigabit extended distance)
|
|
rcGbicCu(13), -- (gigabit copper)
|
|
rcGbicOther(14), -- (gigabit other)
|
|
rcOc3cSM(15), -- (OC-3c SM)
|
|
rcOc3cMM(16), -- (OC-3c MM)
|
|
rcOc3cCOPPER(17), -- (OC-3c COPPER)
|
|
rcOc12cSM(18), -- (OC-12c SM)
|
|
rcOc12cMM(19), -- (OC-12c MM)
|
|
rcDs3(20), -- (Ds3)
|
|
rcE3(21), -- (E3)
|
|
rcGbicNone(22), -- (Gbic card feature)
|
|
rc1000BaseT(23), -- (1000 base copper)
|
|
rcGbicZx(24), -- (gigabit very extended distance)
|
|
rcOc3cAtmSM(25), -- (Atm OC-3c SM)
|
|
rcOc3cAtmMM(26), -- (Atm OC-3c MM)
|
|
rcOc12cAtmSM(27), -- (Atm OC-12c SM)
|
|
rcOc12cAtmMM(28), -- (Atm OC-12c MM)
|
|
rcOc3cPosSM(29), -- (Pos OC-3c SM)
|
|
rcOc3cPosMM(30), -- (Pos OC-3c MM)
|
|
rcOc12cPosSM(31), -- (Pos OC-12c SM)
|
|
rcOc12cPosMM(32), -- (Pos OC-12c MM)
|
|
rcGbic1470(33), -- (gigabit wavelength 1470)
|
|
rcGbic1490(34), -- (gigabit wavelength 1490)
|
|
rcGbic1510(35), -- (gigabit wavelength 1510)
|
|
rcGbic1530(36), -- (gigabit wavelength 1530)
|
|
rcGbic1550(37), -- (gigabit wavelength 1550)
|
|
rcGbic1570(38), -- (gigabit wavelength 1570)
|
|
rcGbic1590(39), -- (gigabit wavelength 1590)
|
|
rcGbic1610(40), -- (gigabit wavelength 1610)
|
|
rcRmon(41), -- (1000 base TProbe)
|
|
rcGbic1470APD(42), -- (gigabit wavelength 1470-APD)
|
|
rcGbic1490APD(43), -- (gigabit wavelength 1490-APD)
|
|
rcGbic1510APD(44), -- (gigabit wavelength 1510-APD)
|
|
rcGbic1530APD(45), -- (gigabit wavelength 1530-APD)
|
|
rcGbic1550APD(46), -- (gigabit wavelength 1550-APD)
|
|
rcGbic1570APD(47), -- (gigabit wavelength 1570-APD)
|
|
rcGbic1590APD(48), -- (gigabit wavelength 1590-APD)
|
|
rcGbic1610APD(49), -- (gigabit wavelength 1610-APD)
|
|
rc10GbLW(50), -- (10 Gig Ethernet LW)
|
|
rc10GbLR(51), -- (10 Gig Ethernet LR)
|
|
rcLogicalServerPort(52), -- opm Prism used as a server for MPLS
|
|
rc1000BaseTX(53), -- (triple speed)
|
|
rc100BaseTXPOE(54), -- (double speed with POE support)
|
|
rcGbicBx(55), -- (SFP - Single Fiber Bi-Directional - 100Base-Bxl)
|
|
rc10GbNone(56), -- (10 Gig Feature)
|
|
rc1000XFP(57), -- 10Gig XFP Gbic
|
|
rc10GbSR(58), -- (10 Gig SR Ethernet)
|
|
rc10GbSW(59), -- (10 Gib SW wavelength 850nm and sonet)
|
|
rc10GbER(60), -- (10 Gig ER wavelen 1550nm)
|
|
rc10GbEW(61), -- (10 Gig EW)
|
|
rc10GbOther(62), -- (10 Gig Ethernet other)
|
|
rc1000BaseTXPOE(63), -- (triplespeed withPOE support)
|
|
rc10GbZR(64), -- (10 Gig ZR wavelength 1550nm)
|
|
rc10GbZW(65), -- (10 Gig ZW wavelength 1550nm)
|
|
rcGbic1310Xd(66), -- (gigabit wavelength 1310-distance 40Kms)
|
|
rcGbic1470Xd(67), -- (gigabit wavelength 1470-distance 40Kms)
|
|
rcGbic1490Xd(68), -- (gigabit wavelength 1490-distance 40Kms)
|
|
rcGbic1510Xd(69), -- (gigabit wavelength 1510-distance 40Kms)
|
|
rcGbic1530Xd(70), -- (gigabit wavelength 1530-distance 40Kms)
|
|
rcGbic1550Xd(71), -- (gigabit wavelength 1550-distance 40Kms)
|
|
rcGbic1570Xd(72), -- (gigabit wavelength 1570-distance 40Kms)
|
|
rcGbic1590Xd(73), -- (gigabit wavelength 1590-distance 40Kms)
|
|
rcGbic1610Xd(74), -- (gigabit wavelength 1610-distance 40Kms)
|
|
rcGbic1470Zx(75), -- (gigabit wavelength 1470-distance 70Kms)
|
|
rcGbic1490Zx(76), -- (gigabit wavelength 1490-distance 70Kms)
|
|
rcGbic1510Zx(77), -- (gigabit wavelength 1510-distance 70Kms)
|
|
rcGbic1530Zx(78), -- (gigabit wavelength 1530-distance 70Kms)
|
|
rcGbic1550Zx(79), -- (gigabit wavelength 1550-distance 70Kms)
|
|
rcGbic1570Zx(80), -- (gigabit wavelength 1570-distance 70Kms)
|
|
rcGbic1590Zx(81), -- (gigabit wavelength 1590-distance 70Kms)
|
|
rcGbic1610Zx(82), -- (gigabit wavelength 1610-distance 70Kms)
|
|
rcGbic1690Zx(83), -- (gigabit wavelength 1690-distance 70Kms)
|
|
rcGbic1310Bx(84), -- (gigabit wavelength 1310-distance 10Kms)
|
|
rcGbic1490Bx(85), -- (gigabit wavelength 1490-distance 10Kms)
|
|
rcGbicEx(86), -- (gigabit wavelength 1550-distance 120 Kms)
|
|
rcGbic850Sx(87), -- (gigabit short haul wavelength 850)
|
|
rcGbic1200Lx(88), -- (gigabit long haul wavelength 1200)
|
|
rcGbic1300Lx(89), -- (gigabit long haul wavelength 1300)
|
|
rcGbic1310Lx(90), -- (gigabit long haul wavelength 1310)
|
|
rcGbic1490Lx(91), -- (gigabit long haul wavelength 1490)
|
|
rcGbic1550Lx(92), -- (gigabit long haul wavelength 1550)
|
|
rcGbic1550Ex(93), -- (gigabit wavelength 1550-distance 120Kms)
|
|
rc1GbFD(94), -- (100/1000 Fiber Gbic)
|
|
rc10GbLRM(95), -- (10 Gig LRM)
|
|
rc10GbDWDMR(96), -- (10 Gig DWDM Ethernet)
|
|
rc10GbDWDMW(97), -- (10 Gig DWDM Sonet)
|
|
rc100BaseSX(98), -- (100 mbps fiber short haul wavelength)
|
|
rc100BaseLX(99), -- (100 mbps fiber long haul wavelength)
|
|
rc100BaseFX(100), -- (100 mbps fiber)
|
|
rc100BaseBX(101), -- (100 mbps fiber)
|
|
rc100BaseZX(102), -- (100 mbps fiber)
|
|
rcGbicMTRJ(103), -- (Mechanical Transfer - registered jack)
|
|
rcGbic1300SeFx(104),-- (1300SE-FX Gbic Ethernet)
|
|
rcGbicCx(105), -- (copper direct attach cable up to 15 meter)
|
|
rc10GbCX(106), -- (copper direct attach cable up to 15 meter)
|
|
rcSFPplus(107), -- (1000/10G SFP+ Gbic)
|
|
rc10GBaseT(108), -- (100/1000/10G base copper)
|
|
rc100BaseOther(109), -- (100 mbps Ethernet other)
|
|
rcUnknownSpeedOther(110), -- (Ethernet other of undetermined speed)
|
|
rc10GbERCWDM(111), -- (10G ER CWDM)
|
|
rc10GbZRCWDM(112), -- (10G ZR CWDM)
|
|
rc10GbER1470(113), -- (10G ER CWDM 1470NM 40KM)
|
|
rc10GbER1490(114), -- (10G ER CWDM 1490NM 40KM)
|
|
rc10GbER1510(115), -- (10G ER CWDM 1510NM 40KM)
|
|
rc10GbER1530(116), -- (10G ER CWDM 1530NM 40KM)
|
|
rc10GbER1550(117), -- (10G ER CWDM 1550NM 40KM)
|
|
rc10GbER1570(118), -- (10G ER CWDM 1570NM 40KM)
|
|
rc10GbER1590(119), -- (10G ER CWDM 1590NM 40KM)
|
|
rc10GbER1610(120), -- (10G ER CWDM 1610NM 40KM)
|
|
rc10GbZR1470(121), -- (10G ZR CWDM 1470NM 70KM)
|
|
rc10GbZR1490(122), -- (10G ZR CWDM 1490NM 70KM)
|
|
rc10GbZR1510(123), -- (10G ZR CWDM 1510NM 70KM)
|
|
rc10GbZR1530(124), -- (10G ZR CWDM 1530NM 70KM)
|
|
rc10GbZR1550(125), -- (10G ZR CWDM 1550NM 70KM)
|
|
rc10GbZR1570(126), -- (10G ZR CWDM 1570NM 70KM)
|
|
rc10GbZR1590(127), -- (10G ZR CWDM 1590NM 70KM)
|
|
rc10GbZR1610(128), -- (10G ZR CWDM 1610NM 70KM)
|
|
rc40GbNone(129), -- (40 Gig Feature)
|
|
rc40GbSR4(130), -- (40 Gig Short Reach Fiber)
|
|
rc40GbLR4(131), -- (40 Gig Long Reach Fiber)
|
|
rc40GbCR4(132), -- (40 Gig Copper)
|
|
rc40GbOther(133), -- (40 Gig Other)
|
|
rcGbicDWDM180km(134),-- (JDSU DWDM 180KM)
|
|
rc100BaseFxT1(135),-- (100BaseFx over TDM network)
|
|
rcUnsupported(136), -- unsupported type
|
|
rc40GbER(137), -- (40 Gig extended range)
|
|
rc40GbNoneChannelized(138), -- (40 Gig Feature channel)
|
|
rc40GbSR4Channelzied(139), -- (40 Gig Short Reach Fiber channel)
|
|
rc40GbLR4Channelized(140), -- (40 Gig Long Reach Fiber channelized)
|
|
rc40GbCR4Channelized(141), -- (40 Gig Copper channelized)
|
|
rc40GbERChannelized(142), -- (40 Gig ER channelized)
|
|
rc40GbOtherChannelized(143),-- (40 Gig Other channelized)
|
|
rc40GbER4(144), -- (40 Gig CWDM 1310NM 40KM)
|
|
rc40GbLM4(145), -- (40 Gig Long Reach multimode)
|
|
rc10GbBiDi(146), -- (10 Gig Bi-directional 10KM)
|
|
rc40GbCR4BoC(147), -- (40G DAC breakout cable)
|
|
rc40GbAOBoC(148), -- (40G Active optical breakout cable)
|
|
rc10GbCXBoC(149), -- (10Gb end of 40G DAC breakout cable)
|
|
rc10GbAOBoC(150), -- (10Gb end of 40G Active Optical breakout cable)
|
|
rc40GbER4Channelized(151), -- (40 Gig ER4 Channelized)
|
|
rc40GbLM4Channelized(152), -- (40 Gig LM4 channelized)
|
|
rc40GbCR4BoCChannelized(153), -- (40G DAC breakout cable in channelized mode)
|
|
rc40GbAOBoCChannelized(154), -- (40G Active optical breakout cable in channelized mode)
|
|
rc40GbAOC(155), -- (40G Active Optical Cable)
|
|
rc40GbAOCChannelized(156), -- (40G Active Optical Cable in channelzied mode)
|
|
rc100GbNone(157), -- (100 Gig Feature)
|
|
rc100GbCR4(158), -- (100 Gig Copper)
|
|
rc100GbSR4(159), -- (100 Gig Short Reach Fiber)
|
|
rc100GbLR4(160), -- (100 Gig Long Reach Fiber)
|
|
rc100GbAOC(161), -- (100G Active Optical Cable)
|
|
rc100GbAOBoC(162), -- (100G Active optical breakout cable)
|
|
rc100GbCR4BoC(163), -- (100G DAC breakout cable)
|
|
rc100GbOther(164), -- (100 Gig Other)
|
|
rc100GbER4(165), -- (100 Gig ERS4)
|
|
rc100GbNoneChannelized(166), -- (100 Gig Feature channel)
|
|
rc100GbCR4Channelized(167),
|
|
rc100GbSR4Channelized(168),
|
|
rc100GbLR4Channelized(169),
|
|
rc100GbER4Channelized(170),
|
|
rc100GbAOCChannelized(171),
|
|
rc100GbAOBoCChannelized(172),
|
|
rc100GbCR4BoCChannelized(173),
|
|
rc100GbOtherChannelized(174),
|
|
rcGbic10GbCu(175) -- (10 gigabit copper)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port type"
|
|
::= { rcPortEntry 2 }
|
|
|
|
rcPortConnectorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nonRedundant(1), -- non-redundant connector type
|
|
redundant(2) -- redundant connector type
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Type of connector installed on this port."
|
|
DEFVAL { nonRedundant }
|
|
::= { rcPortEntry 3 }
|
|
|
|
rcPortPerformRouting OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Indicate whether this port should perform
|
|
routing"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 4 }
|
|
|
|
rcPortHighPriority OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Indicate whether this port should be treated with
|
|
high priority"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 5 }
|
|
|
|
rcPortAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
flushMacFdb(2), -- flush MAC forwarding table
|
|
flushArp(3), -- flush ARP table
|
|
flushIp(4), -- flush IP route table
|
|
flushAll(5), -- flush all tables
|
|
triggerRipUpdate(6), -- manually trigger rip update
|
|
clearLoopDetectAlarm(7) -- manually enable the port on all the disabled vlans
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port related actions."
|
|
DEFVAL { none }
|
|
::= { rcPortEntry 6 }
|
|
|
|
rcPortResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
inProgress(2), -- in progress
|
|
success(3), -- success
|
|
fail(4) -- failure
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Result from the last Vlan action."
|
|
DEFVAL { none }
|
|
::= { rcPortEntry 7 }
|
|
|
|
rcPortPrimaryConnector OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
left(1), -- left side connector
|
|
right(2), -- right side connector
|
|
other(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "For ports configured with redundant connectors,
|
|
this value is used to indicate which connector
|
|
should be used as the 'active' connector on this
|
|
port the next time the port is placed into the
|
|
ifAdminStatus=Up."
|
|
DEFVAL { left }
|
|
::= { rcPortEntry 8 }
|
|
|
|
rcPortActiveConnector OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
left(1), -- left side connector
|
|
right(2), -- right side connector
|
|
other(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "For ports configured with redundant connectors,
|
|
this value is used to indicate which connector
|
|
is currently the active one. Only one connector
|
|
can be active an anytime."
|
|
DEFVAL { left }
|
|
::= { rcPortEntry 9 }
|
|
|
|
rcPortBackupConnectorStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- link Up
|
|
down(2), -- link Down
|
|
other(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the status of the link attached to the
|
|
back-up (non-active) connector."
|
|
::= { rcPortEntry 10 }
|
|
|
|
rcPortAutoNegotiate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether this port enabled for auto
|
|
negotiations or not."
|
|
DEFVAL { true }
|
|
::= { rcPortEntry 11 }
|
|
|
|
rcPortAdminDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
half(1), -- half duplex
|
|
full(2) -- full duplex
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the port duplex type "
|
|
DEFVAL { half }
|
|
::= { rcPortEntry 12 }
|
|
|
|
rcPortOperDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
half(1), -- half duplex
|
|
full(2) -- full duplex
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate this port's current duplex value."
|
|
::= { rcPortEntry 13 }
|
|
|
|
rcPortAdminSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
mbps10(1), -- 10Mb/s
|
|
mbps100(2), -- 100Mb/s
|
|
mbps1000(3), -- 1000Mb/s
|
|
mbps10000(4), -- 10Gb/s
|
|
mbps40000(5), -- 40Gb/s
|
|
mbps100000(6), -- 100Gb/s
|
|
mbps25000(7) -- 25Gb/s
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate this port's speed."
|
|
DEFVAL { mbps10 }
|
|
::= { rcPortEntry 14 }
|
|
|
|
rcPortOperSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate this port's current speed value."
|
|
::= { rcPortEntry 15 }
|
|
|
|
rcPortMltId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate which multi-link trunk (MLT) this port
|
|
is assigned to. If this port is not associated
|
|
with any MLT, this value will be set to zero(0)."
|
|
DEFVAL { 0 }
|
|
::= { rcPortEntry 16 }
|
|
|
|
rcPortLocked OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether this port is locked."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 17 }
|
|
|
|
rcPortAutoNegotiationSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether this port can support
|
|
auto-negotiation."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 18 }
|
|
|
|
rcPortSingleRoutablePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether this port is a single routable
|
|
port. If this value is true, the port functions
|
|
like a traditional router port."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 19 }
|
|
|
|
rcPortUnknownMacDiscard OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If rcUnknownMacDiscard is set to True,
|
|
then a packet with an unknown source MAC address
|
|
is dropped on that port, and other ports then
|
|
will discard any packets with this MAC address
|
|
in the destination field.
|
|
For example,
|
|
suppose 11:22:33:44:55:66 is an unknown source MAC,
|
|
packets with source MAC 11:22:33:44:55 coming from
|
|
this port is discarded, further more, packets with
|
|
destination MAC 11:22:33:44:55:66 coming from
|
|
other ports are also discarded, unless this address
|
|
is later learned on another port or the restriction
|
|
ages out."
|
|
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 20 }
|
|
|
|
rcPortNumStateTransition OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "# state transitions."
|
|
::= { rcPortEntry 21 }
|
|
|
|
rcPortUserPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "User priority level."
|
|
DEFVAL { level7 }
|
|
::= { rcPortEntry 22 }
|
|
|
|
rcPortAllowOversizeFrame OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to specify whether over-size frames should be
|
|
processed or dropped."
|
|
::= { rcPortEntry 23 }
|
|
|
|
rcPortQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the Qos level packets, carried on this
|
|
port, should be processed with."
|
|
DEFVAL { level1 }
|
|
::= { rcPortEntry 30 }
|
|
|
|
rcPortDiffServEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable the Differentiated Service
|
|
feature on this port."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 31 }
|
|
|
|
rcPortDiffServType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
access(1),
|
|
core(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the Differentiated Service type
|
|
for this port."
|
|
DEFVAL { access }
|
|
::= { rcPortEntry 32 }
|
|
|
|
rcPortDiffServIeee8021POverrideEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to enable/disable the Differentiated Service
|
|
IEEE 802.1P over-ride feature."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 33 }
|
|
|
|
rcPortVendorDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to show the name of the vendor of this port's
|
|
connector. Only applicable to ports on a GBIC cards."
|
|
::= { rcPortEntry 34 }
|
|
|
|
rcPortName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..42))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This port's name."
|
|
::= { rcPortEntry 35 }
|
|
|
|
rcPortOctapidId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The octapid id of the mirrored port."
|
|
::= { rcPortEntry 36 }
|
|
|
|
rcPortWan OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0), -- Not Applicable for non-10GE interface
|
|
wan(1),
|
|
lan(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicatie this port's current WAN/LAN mode. Valid for 10 GE only"
|
|
DEFVAL { wan }
|
|
::= { rcPortEntry 37 }
|
|
|
|
rcPortTransport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0), -- N/A for non-10GE WAN interface
|
|
sonet(1),
|
|
sdh(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicatie this port's current tranport layer. Valid for 10 GE only"
|
|
DEFVAL { sonet }
|
|
::= { rcPortEntry 38 }
|
|
|
|
rcPortMultimediaFilterEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable the Telephony device selected on this port"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 39 }
|
|
|
|
rcPortMultimediaDevSelection OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set/get the selected Multimedia &
|
|
Telephony Devices on this port. The String is
|
|
the name of the device in the
|
|
rcIpFilterMediaDevTable"
|
|
::= { rcPortEntry 40 }
|
|
|
|
rcPortServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
l2uni (1),
|
|
vpls (2),
|
|
ip (3),
|
|
serverl2uni (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the port functionality. 12uni is used to
|
|
configure the port to be part of Martini service,
|
|
tls is used to configure the port to be part of
|
|
Any2Any VPN service and ip is used to perform the IP
|
|
routing and mpls if enabled."
|
|
::= { rcPortEntry 41 }
|
|
|
|
rcPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
transparent (1),
|
|
switched (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The port mode for l2uni service type.If the port is
|
|
configured for l2uni service type, then the mode can
|
|
be transparent or switched."
|
|
DEFVAL { none }
|
|
::= { rcPortEntry 42 }
|
|
|
|
rcPortAdminRouting OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether the port is routable."
|
|
DEFVAL { enable }
|
|
::= { rcPortEntry 43 }
|
|
|
|
rcPortOperRouting OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of the port whether is routable."
|
|
::= { rcPortEntry 44 }
|
|
|
|
rcPortPid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The pid of the mirrored port."
|
|
::= { rcPortEntry 45 }
|
|
|
|
rcPortIeee8021POverrideEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable IEEE 802.1P override.
|
|
If it is enabled, 802.1p value from a tagged
|
|
frame may not be honored."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 46 }
|
|
|
|
rcPortShaperEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable shaper on the port."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 47 }
|
|
|
|
rcPortShaperMaxRate OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Shaping rate in mega bits per second. Note that
|
|
actual shaping rate might be different from the
|
|
configured rate due to the rate granularity
|
|
of the shaper."
|
|
DEFVAL { 10 }
|
|
::= { rcPortEntry 48 }
|
|
|
|
rcPortShaperBurstSize OBJECT-TYPE
|
|
SYNTAX Integer32(4..16000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Burst size in kilo bytes per second. Note
|
|
that actual burst size might be different
|
|
from the configured size due to the granularity
|
|
of the shaper."
|
|
DEFVAL { 4 }
|
|
::= { rcPortEntry 49 }
|
|
|
|
rcPortCpLimitShutDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A TRUE value indicates if CP Limit shut down
|
|
the interface."
|
|
::= { rcPortEntry 50 }
|
|
|
|
rcPortHighSecureEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable high secure feature."
|
|
::= { rcPortEntry 51 }
|
|
|
|
rcPortTlsPriorityOverride OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable tls port priority override feature."
|
|
DEFVAL { disable }
|
|
::= { rcPortEntry 52 }
|
|
|
|
rcPortVctAbility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vctNotCapable(1),
|
|
vctCapable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If this object is TRUE, then the specified port is
|
|
hardware-capable of doing the VCT test, if the
|
|
rcPortAdminStatus is also true. If this object is
|
|
FALSE, then the hardware cannot do the VCT test
|
|
regardless of the setting of the rcPortAdminStatus."
|
|
::= { rcPortEntry 53 }
|
|
|
|
rcPortVctAdminStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Admin status for port VCT test. If this object is
|
|
set to TRUE, then the VCT test can be performed. If
|
|
it is set to FALSE, then the test cannot be performed,
|
|
even if the port hardware is capable of doing it. If
|
|
this variable si read, then the value returned is
|
|
what was previously written."
|
|
::= { rcPortEntry 54 }
|
|
|
|
rcPortMrouteStrLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32768)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "maximum number of multicast streams that are
|
|
allowed to ingress to CPU through this port."
|
|
DEFVAL { 1984 }
|
|
::= { rcPortEntry 55 }
|
|
|
|
rcPortMrouteStrTimerCheck OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "sampling period to check number of multicast
|
|
streams that has ingressed CPU through this
|
|
port in seconds."
|
|
DEFVAL { 10 }
|
|
::= { rcPortEntry 56 }
|
|
|
|
rcPortMrouteStrLimitEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable or disable mroute stream limit on port."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 57 }
|
|
|
|
rcPortUpdateDynamicMacQosLevel OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "It is used to indicate whether to update qos
|
|
level for dynamic learned mac add resses
|
|
associated with a port-based vlan when port qos
|
|
level changes. If it is set to TRUE, qos level
|
|
for all dynamic learned mac addresses will be
|
|
changed upon changing port qos level. If it
|
|
is set to DISABLE, once a mac address is learned,
|
|
qos level will not updated when port qos level
|
|
changes."
|
|
DEFVAL { disable }
|
|
::= { rcPortEntry 58 }
|
|
|
|
rcPortVplsDualHoming OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (0),
|
|
firstNNI (1),
|
|
secondNNI (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VPLS dual homing is for VPLS service type only.
|
|
It can be disable, firstNNI or secondNNI."
|
|
DEFVAL { disable }
|
|
::= { rcPortEntry 59 }
|
|
|
|
rcPortVplsMgmtVlan OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Management Vlan is configured on this port"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 60 }
|
|
|
|
rcPortTlsManagedBySp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "True/False tls devices on port Managed By Service Provider."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 61 }
|
|
|
|
rcPortAutoNegAd OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
advertise10Half(0),
|
|
advertise10Full(1),
|
|
advertise100Half(2),
|
|
advertise100Full(3),
|
|
advertise1000Half(4),
|
|
advertise1000Full(5),
|
|
advertiseMacPause(6), -- Not supported in 8600
|
|
advertiseAsymPause(7), -- Not supported in 8600
|
|
advertiseNone(8),
|
|
advertise10000Full(9),
|
|
default(10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used to specify the port speed
|
|
and duplex abilities to be advertised during
|
|
link negotiation.
|
|
|
|
bit 0 - 10 half duplex advertised
|
|
bit 1 - 10 full duplex advertised
|
|
bit 2 - 100 half duplex advertised
|
|
bit 3 - 100 full duplex advertised
|
|
bit 4 - 1000 half duplex advertised
|
|
bit 5 - 1000 full duplex advertised
|
|
bit 6 - Mac PAUSE frame support advertised
|
|
bit 7 - Asymmetric PAUSE frame support advertised
|
|
bit 8 - No advertisements
|
|
bit 9 - 10G full duplex advertisement
|
|
bit 10 - Set advertise to default setting based on the
|
|
hardware capability.
|
|
|
|
The abilities specified in this object are only used
|
|
when auto-negotiation is enabled on the port. If all
|
|
bits in this object are disabled, and auto-negotiation
|
|
is enabled on the port, then the physical link process
|
|
on the port will be disabled (if hardware supports
|
|
this ability).
|
|
|
|
Any change in the value of this bit map will force the
|
|
PHY to restart the auto-negotiation process. This will
|
|
have the same effect as physically unplugging and
|
|
reattaching the cable plant attached to this port.
|
|
|
|
The capabilities being advertised are either all the
|
|
capabilities supported by the hardware or the user-
|
|
configured capabilities which is a subset of all the
|
|
capabilities supported by the hardware. Bit 10, default
|
|
allowed user to set advertise to default. 'default' will take
|
|
precedence if 'default' bit is combined with other bits.
|
|
|
|
The default value for this object will be all the
|
|
capabilities supported by the hardware.
|
|
|
|
Note that bit 6 and bit 7 are currently not supported
|
|
in ERS8600."
|
|
::= { rcPortEntry 62 }
|
|
|
|
rcPortAutoNegAdCapability OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
advertise10Half(0),
|
|
advertise10Full(1),
|
|
advertise100Half(2),
|
|
advertise100Full(3),
|
|
advertise1000Half(4),
|
|
advertise1000Full(5),
|
|
advertiseMacPause(6),
|
|
advertiseAsymPause(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the port speed and duplex
|
|
capabilities that hardware can actually support on a
|
|
port, and which may be advertised by the port
|
|
using auto-negotiation. Bit 7 tells if a port supports
|
|
pause frame capabilities (for full-duplex links) as a
|
|
part of the advertisement.
|
|
|
|
bit 0 - 10 half duplex advertisements
|
|
bit 1 - 10 full duplex advertisements
|
|
bit 2 - 100 half duplex advertisements
|
|
bit 3 - 100 full duplex advertisements
|
|
bit 4 - 1000 half duplex advertisements
|
|
bit 5 - 1000 full duplex advertisements
|
|
bit 6 - Mac PAUSE frame support advertisements
|
|
bit 7 - Asymmetric PAUSE frame support advertisements
|
|
|
|
If auto negotiation is not supported by the port
|
|
hardware, then all bits will reflect a value of zero."
|
|
::= { rcPortEntry 63 }
|
|
|
|
rcPortAutoRecoverPort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable or disable auto recovery of port from action
|
|
taken by cp-limit, link flap or loop detect features"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 64 }
|
|
|
|
rcPortExtCplimitConf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
softDown(2),
|
|
hardDown(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the port configuration for extended CP-LIMIT "
|
|
DEFVAL { none}
|
|
::= { rcPortEntry 65 }
|
|
|
|
rcPortExtCplimitUtilRate OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Threshold for Ingress traffic utilization rate of the
|
|
port for extended CP-LIMIT "
|
|
DEFVAL { 50 }
|
|
::= { rcPortEntry 66 }
|
|
|
|
rcPortEgressRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER(0 | 64..100000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Egress Rate Limit. Different platform has different valid range.
|
|
For VOSS product, Valid range is 1000..100000000, 0 means disabled.
|
|
The maximum value is based on the port capability.
|
|
Value of qos if-shaper"
|
|
::= { rcPortEntry 67 }
|
|
|
|
rcPortEgressRateLimitState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable shape/egress-rate-limit
|
|
functionality. WHen it is disabled, rcPortEgressRateLimit
|
|
will be set to 0"
|
|
DEFVAL { disable }
|
|
::= { rcPortEntry 68 }
|
|
|
|
rcPortBpduFilteringTimerCount OBJECT-TYPE
|
|
SYNTAX TimeInterval (0..6553500)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The remaining time the port will be disabled due
|
|
to a BPDU received when BPDU filtering is enabled."
|
|
::= { rcPortEntry 69 }
|
|
|
|
rcPortBpduFilteringTimeout OBJECT-TYPE
|
|
SYNTAX TimeInterval (0..6553500)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The time the port will be disabled when a BPDU is
|
|
received when BPDU filtering is enabled."
|
|
::= { rcPortEntry 70 }
|
|
|
|
rcPortBpduFilteringAdminEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to enable/disable BPDU filtering."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 71 }
|
|
|
|
rcPortBpduFilteringOperEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Indicates whether BPDU filtering is actually
|
|
enabled or disabled."
|
|
::= { rcPortEntry 72 }
|
|
|
|
rcPortQinqEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The qinq ether type value. It is hex value.
|
|
It should be displayed and input as Hex value. It is
|
|
only be used when port is associated with QnQ service
|
|
UNI. Otherwise, it would be ignored"
|
|
DEFVAL { '8020'h }
|
|
::= { rcPortEntry 73 }
|
|
|
|
rcPortTrustDscp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable the trusted DSCP feature.
|
|
If enabled, the internal qos-level and 802.1p value are derived
|
|
from the received packet's DSCP value. This MIB object is
|
|
applicable to ports in 8348GTX so that higher priority IP traffic
|
|
can bypass the oversubscribed cascading link."
|
|
DEFVAL {false}
|
|
::= {rcPortEntry 74}
|
|
|
|
rcPortCpLimitEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable the control packet rate limit.
|
|
Specifies whether or not rate limiting is currently in
|
|
operation for multicast and broadcast packets for the
|
|
specified port."
|
|
DEFVAL { enable }
|
|
::= { rcPortEntry 75 }
|
|
|
|
rcPortCpMulticastLimit OBJECT-TYPE
|
|
SYNTAX INTEGER(1000..100000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to limit Multicast traffic on the specified port.
|
|
Sets the limit in packets per second."
|
|
DEFVAL { 10000 }
|
|
::= { rcPortEntry 76 }
|
|
|
|
rcPortCpBroadcastLimit OBJECT-TYPE
|
|
SYNTAX INTEGER(1000..100000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to limit Broadcast traffic on the specified port.
|
|
Sets the limit in packets per second."
|
|
DEFVAL { 10000 }
|
|
::= { rcPortEntry 77 }
|
|
|
|
rcPortSmartAutoNegotiate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates whether 'smart' autonegotiation is
|
|
enabled on a port (smart autonegotiation indicates that the
|
|
port can sense whether its partner has autonegotiation
|
|
enabled). This object, when supported, works in conjunction
|
|
with rcPortAutoNegotiate. It is an inconsistentValue error
|
|
to set rcPortAutoNegotiate to false(2) and this object to
|
|
true(1) in the same Set request. Setting the object to
|
|
true(1) will automatically change rcPortAutoNegotiate to
|
|
true(1). Similarly, setting rcPortAutoNegotiate to false(2)
|
|
will automatically change this object to false(2)."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 78 }
|
|
|
|
rcPortMepList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..408))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "List of Meps assigned to this entry.
|
|
A mep is consist of <md>.<ma>.<mep_id>. Domain
|
|
Name, Association and Mep Id is separated by '.'
|
|
A list of mep is consist of
|
|
<md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,...
|
|
Each mep is separated by ','. Maximum up 8 meps"
|
|
::= { rcPortEntry 79 }
|
|
|
|
rcPortNumOfMep OBJECT-TYPE
|
|
SYNTAX Integer32(0..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Meps
|
|
is assigned to this entry"
|
|
::= { rcPortEntry 80 }
|
|
|
|
rcPortAdacStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If enabled, the Nortel IP phones connected to the port will be
|
|
configured in the voice VLAN."
|
|
::= { rcPortEntry 81 }
|
|
|
|
rcPortPvid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4093)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A port Vlan Id associates with ESM and RModule
|
|
port for OEL2/MIM traffic"
|
|
DEFVAL { 0 }
|
|
::= { rcPortEntry 82 }
|
|
|
|
rcPortTdp OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This attribute allows to Enable/Disable Transparent
|
|
Domain Protocol at the port level on the ESM and
|
|
Power Ranger Card. For the TDP packet to go out on
|
|
the port, topology should be enabled both at the port
|
|
and box level also."
|
|
DEFVAL { disable }
|
|
::= { rcPortEntry 83 }
|
|
|
|
rcPortClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
line (1),
|
|
internal (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates this port's current WAN clock source.
|
|
Valid for 10 GE WAN only"
|
|
DEFVAL { internal }
|
|
::= { rcPortEntry 84 }
|
|
|
|
|
|
rcPortIngressRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER(0 | 1000..100000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Limits the amount of traffic from this Ingress port.
|
|
Value of qos if-rate-limite setting"
|
|
::= { rcPortEntry 85 }
|
|
|
|
rcPortIngressRateLimitState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable police/ingress-rate-limit
|
|
functionality."
|
|
DEFVAL { disable }
|
|
::= { rcPortEntry 86 }
|
|
|
|
rcPortVrfIdList OBJECT-TYPE
|
|
SYNTAX IdList (SIZE (0..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of VRF ids to which this port belongs."
|
|
::= { rcPortEntry 87 }
|
|
|
|
rcPortCfmVid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "CFM default port vid"
|
|
DEFVAL { 0 }
|
|
::= { rcPortEntry 88 }
|
|
|
|
rcPortUserLabel1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..89))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User provided field. Used to give extra management information/data "
|
|
::= { rcPortEntry 89 }
|
|
|
|
rcPortUserLabel2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..89))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User provided additional field. Used to give extra management information/data "
|
|
::= { rcPortEntry 90 }
|
|
|
|
rcPortClearCfmStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To clear the port counter"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 91 }
|
|
|
|
rcPortInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
silent(2),
|
|
uni(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value indicates whether a port is of type <normal/si
|
|
lent/uni>. A port can be included in any EVPN service
|
|
only if this attribute is set to uni. If the port is not
|
|
part of any VLAN the interface-type is set to silent.
|
|
Before adding a port to a VLAN the interface type should
|
|
be changed to normal."
|
|
DEFVAL { silent }
|
|
::= { rcPortEntry 92 }
|
|
|
|
rcPortCfmControlMep OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..57))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MEP assigned for CFM Control.
|
|
A mep consists of <md>.<ma>.<mep_id>. Domain
|
|
Name, Association and Mep Id is separated by '.'"
|
|
::= { rcPortEntry 93 }
|
|
|
|
rcPortMtu OBJECT-TYPE
|
|
SYNTAX Integer32 (1518..9600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port Mtu"
|
|
DEFVAL { 1518 }
|
|
::= { rcPortEntry 94 }
|
|
|
|
rcPortMtuState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable Port Mtu
|
|
functionality."
|
|
DEFVAL { disable }
|
|
::= { rcPortEntry 95 }
|
|
|
|
rcPortVrfNameList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of VRF names to which this port belongs."
|
|
::= { rcPortEntry 96 }
|
|
|
|
rcPortBrouterVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Gives the VRF Id for this Brouter port. "
|
|
::= { rcPortEntry 97 }
|
|
|
|
rcPortBrouterVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Gives the VRF Name for this Brouter port. "
|
|
::= { rcPortEntry 98 }
|
|
|
|
rcPortVrfCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of VRFs this port is associated to."
|
|
::= { rcPortEntry 99 }
|
|
|
|
rcPortCtrlPktDropLimitEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable Control Packets Drop
|
|
Rate Limiter functionality."
|
|
DEFVAL { disable }
|
|
::= { rcPortEntry 100 }
|
|
|
|
rcPortCtrlPktDropLimit OBJECT-TYPE
|
|
SYNTAX Integer32(0 | 20..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Control Packet drop rate limit
|
|
value"
|
|
DEFVAL { 20 }
|
|
::= { rcPortEntry 101 }
|
|
|
|
rcPortCtrlPktShutdownLimitEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable Control Packets
|
|
Shutdown Rate Limiter functionality."
|
|
DEFVAL { disable }
|
|
::= { rcPortEntry 102 }
|
|
|
|
rcPortCtrlPktShutdownLimit OBJECT-TYPE
|
|
SYNTAX Integer32(0 | 20..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Control Packet shutdown rate
|
|
Limit value"
|
|
DEFVAL { 100 }
|
|
::= { rcPortEntry 103 }
|
|
|
|
rcPortCtrlPktShutdownRtExceeded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates if the Shutdown rate has been exceeded
|
|
on the port"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 104 }
|
|
|
|
rcPortCtrlPktDropRtExceeded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates if the Drop rate has been exceeded
|
|
on the port"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 105 }
|
|
|
|
rcPortDhcpOption82SubscriberId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the DHCP option 82 subscriber ID string to
|
|
be used in sub-option 6. If the value is an empty string, then
|
|
sub-option 6 is not included in option 82"
|
|
DEFVAL { ''h }
|
|
::= { rcPortEntry 106 }
|
|
|
|
rcPortServiceCardType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
esm8x1000Base(1),
|
|
pr48x1000BaseTX(2),
|
|
pr30x1000BaseSXBB(3),
|
|
pr3x10GBaseGbic(4),
|
|
pr3x10GBaseXZW(5),
|
|
prPR48x1000BaseGBRS(6),
|
|
prPR48x1000BaseGTRS(7),
|
|
prPR12X10GBaseXLRS(8),
|
|
prPR34xXGRS(9),
|
|
prPR48x1000BaseGXRS(10),
|
|
prPR30x1000BaseGBRS(11),
|
|
prPR6X10GBaseXLRS(12),
|
|
prPR26xXGRS(13),
|
|
other(14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Hardware type, which includes PowerRanger,
|
|
ESM port and other"
|
|
::= { rcPortEntry 107}
|
|
|
|
rcPortIngressRatePeak OBJECT-TYPE
|
|
SYNTAX INTEGER(0 | 64..40000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Peak rate limit for this port. 0 means disable"
|
|
DEFVAL { 0 }
|
|
::= { rcPortEntry 108 }
|
|
|
|
rcPortIngressRateSvc OBJECT-TYPE
|
|
SYNTAX INTEGER(0 | 64..40000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Service rate limit for this port. 0 mean disable"
|
|
DEFVAL { 0 }
|
|
::= { rcPortEntry 109 }
|
|
|
|
rcPortCpLimitPktRate OBJECT-TYPE
|
|
SYNTAX INTEGER(1000..20000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to limit Control packets on the
|
|
port to qos-levels 6 and 7.
|
|
Sets the limit in packets per second."
|
|
DEFVAL { 8000 }
|
|
::= { rcPortEntry 110 }
|
|
|
|
rcPortCpLimitShutDownEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate if the port should be shutdown
|
|
when the CpLimitPktRate is exceeded."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 111 }
|
|
|
|
rcPortRmonEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set Remote Monitoring enable/disable"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 112 }
|
|
|
|
rcPortIpsecEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Used to set IPSEC enable/disable.
|
|
at place of this value use RcIpConfEntry for IPV4
|
|
and use RcIpv6InterfaceEntry for IPV6. This field
|
|
changed to deprecated"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 113 }
|
|
|
|
rcPortShutdownReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- (State change is normal.)
|
|
cpLimit(2), -- (State Change due to CpLimit.)
|
|
macFlap(3), -- (State change due to Mac Flap.)
|
|
linkFlap(4), -- (State change due to link flap.)
|
|
telnet(5), -- (State change by TELNET.)
|
|
rLogin(6), -- (State change by RLOGIN .)
|
|
console(7), -- (State change by CONSOLE.)
|
|
ssh(8), -- (State change by SSH.)
|
|
modem(9), -- (State change by modem.)
|
|
snmp(10), -- (State change by SNMP.)
|
|
fdLimit(11), -- (State change by fd limit.)
|
|
vlacp(12), -- (State change by vlacp limit.)
|
|
slpp(13), -- (State change by SLPP.)
|
|
smlt(14), -- (State change by SMLT.)
|
|
lossless(15), -- (State change due to lossless.)
|
|
invalidLossCfg(16), -- (State change due to invalid lossless configuration.)
|
|
dpHeartBeat(17), -- (State change due to DP heartbeat failure.)
|
|
ddmStatus(18), -- (State change due to DDM status.)
|
|
dupQsfpSerNum(19), -- (State change due to duplicate QSFP serial num.)
|
|
bpduGuard(20) -- (State change due to BPDU Guard.)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port shutdown can happen due to many reason.
|
|
It indicates the reason for the port state change."
|
|
DEFVAL { none }
|
|
::= { rcPortEntry 114}
|
|
|
|
rcPortMdixMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1), -- (Enable auto-MDIX when autonegotiation is enabled.)
|
|
forceAuto(2), -- (Enable auto-MDIX always.)
|
|
normal(3), -- (Disable auto-MDIX.)
|
|
xover(4) -- (Disable auto-MDIX, and swap cable pairs.)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Defines the MDI crossover (MDIX) modes for the port"
|
|
-- DEFVAL { none }
|
|
::= { rcPortEntry 115}
|
|
|
|
rcPortFlexUniEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set FLEX UNI enable/disable on port"
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 116}
|
|
|
|
rcPortBpduGuardTimerCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The remaining time the port will be disabled due
|
|
to a BPDU received when BPDU guard is enabled."
|
|
::= { rcPortEntry 117 }
|
|
|
|
rcPortBpduGuardTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0|10..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time the port will be disabled when a BPDU is
|
|
received when BPDU Guard is enabled."
|
|
::= { rcPortEntry 118 }
|
|
|
|
rcPortBpduGuardAdminEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable BPDU guard."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 119 }
|
|
|
|
rcPortLicenseControlStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
locked(1),
|
|
unlocked(2),
|
|
notApplicable(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " This object show the license conrol status of a port.
|
|
It is only applicable to a port which reuqires PORT
|
|
license file to be adminstratively enabled (ifAdminStatus).
|
|
|
|
'locked' means the port requires PORT license file and
|
|
PORT license file is absent
|
|
|
|
'unlocked' means the port requires PORT license file and
|
|
PORT license file is present.
|
|
|
|
'notApplicable' means the port doesn't require PORT license
|
|
file"
|
|
::= { rcPortEntry 120 }
|
|
rcPortTxFlowControl OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable Tx flow control."
|
|
DEFVAL { false }
|
|
::= { rcPortEntry 121 }
|
|
|
|
rcPortTxFlowControlOperState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the Tx flow control operational state."
|
|
::= { rcPortEntry 122 }
|
|
|
|
-- Following between =begin =end is processed by mib_tools/extras.awk
|
|
-- =begin enum
|
|
-- rcPortEgressRateLimit min 10000
|
|
-- =end enum
|
|
|
|
-- Port Pcap Table
|
|
rcPortPcapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortPcapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port pcap Table"
|
|
::= { rcPort 2 }
|
|
|
|
rcPortPcapEntry OBJECT-TYPE
|
|
SYNTAX RcPortPcapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing pcap info. for a particular port"
|
|
INDEX { rcPortPcapIndex }
|
|
::= { rcPortPcapTable 1 }
|
|
|
|
RcPortPcapEntry ::= SEQUENCE {
|
|
rcPortPcapIndex InterfaceIndex,
|
|
rcPortPcapEnable TruthValue,
|
|
rcPortPcapMode INTEGER,
|
|
rcPortPcapFilterListSize INTEGER,
|
|
rcPortPcapFilterList OCTET STRING,
|
|
rcPortPcapAclFilterListSize INTEGER,
|
|
rcPortPcapAclFilterList OCTET STRING
|
|
}
|
|
|
|
|
|
rcPortPcapIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { rcPortPcapEntry 1 }
|
|
|
|
rcPortPcapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable pcap for the port"
|
|
DEFVAL { false }
|
|
::= { rcPortPcapEntry 2 }
|
|
|
|
rcPortPcapMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tx(1),
|
|
rx(2),
|
|
both(3),
|
|
rxFilter(4),
|
|
txFilter(5),
|
|
bothFilter(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Mode in which pcap is enabled"
|
|
DEFVAL { rx }
|
|
::= { rcPortPcapEntry 3 }
|
|
|
|
rcPortPcapFilterListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of filter list(s)
|
|
that are assigned to this port."
|
|
::= { rcPortPcapEntry 4 }
|
|
|
|
|
|
rcPortPcapFilterList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate zero or more filter lists that
|
|
are associated with this port for pcap. Each
|
|
filter list identifier is stored as two bytes
|
|
in this array starting from offset zero. Any
|
|
unused bytes should be set to zero."
|
|
::= { rcPortPcapEntry 5 }
|
|
|
|
rcPortPcapAclFilterListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of ACL filter(s)
|
|
that are assigned to this port which has mirror set
|
|
as global-action."
|
|
::= { rcPortPcapEntry 6 }
|
|
|
|
rcPortPcapAclFilterList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate zero or more ACL filter lists that
|
|
are associated with this port for pcap (has mirror
|
|
set as global-action). Each ACL filter list
|
|
identifier is stored as two bytes
|
|
in this array starting from offset zero. Any
|
|
unused bytes should be set to zero."
|
|
::= { rcPortPcapEntry 7 }
|
|
|
|
-- rcPortPoe IfIndex to Pse Index Table
|
|
|
|
rcPortPoe OBJECT IDENTIFIER ::= { rcPort 3 }
|
|
|
|
rcPortPoePseIndexTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortPoePseIndexEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port table"
|
|
::= { rcPortPoe 1 }
|
|
|
|
rcPortPoePseIndexEntry OBJECT-TYPE
|
|
SYNTAX RcPortPoePseIndexEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular port"
|
|
INDEX { rcPortPoePseIndexIfIndex }
|
|
::= { rcPortPoePseIndexTable 1 }
|
|
|
|
RcPortPoePseIndexEntry ::= SEQUENCE {
|
|
rcPortPoePseIndexIfIndex InterfaceIndex,
|
|
rcPortPoePseIndexGroupIndex Integer32,
|
|
rcPortPoePseIndexPortIndex Integer32
|
|
|
|
}
|
|
|
|
rcPortPoePseIndexIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies an interface
|
|
to a PSE port device. The interface identified by a
|
|
particular value of this index is the same interface
|
|
as identified by the same value of ifIndex."
|
|
::= { rcPortPoePseIndexEntry 1 }
|
|
|
|
rcPortPoePseIndexGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies the group
|
|
containing the port to which a power Etherenet PSE
|
|
is connected. Group means box in the stack, module
|
|
in a rack and the value 1 MUST be used for
|
|
non-modular devices."
|
|
::= { rcPortPoePseIndexEntry 2 }
|
|
|
|
rcPortPoePseIndexPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable uniquely identifies the power Ethernet
|
|
PSE port within group rcPoePseGroupIndex to which the
|
|
power Ethernet PSE entry is connected."
|
|
::= { rcPortPoePseIndexEntry 3 }
|
|
|
|
|
|
-- POE main Pse extn table
|
|
|
|
rcPortPoeMainPseExtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortPoeMainPseExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port table"
|
|
::= { rcPortPoe 2 }
|
|
|
|
rcPortPoeMainPseExtnEntry OBJECT-TYPE
|
|
SYNTAX RcPortPoeMainPseExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular port"
|
|
INDEX { rcPortPoeMainPseExtnGroupIndex }
|
|
::= { rcPortPoeMainPseExtnTable 1 }
|
|
|
|
RcPortPoeMainPseExtnEntry ::= SEQUENCE {
|
|
rcPortPoeMainPseExtnGroupIndex Integer32,
|
|
rcPortPoeMainPseExtnPwrAdmin EnableValue,
|
|
rcPortPoeMainPseExtnPwrPriority INTEGER,
|
|
rcPortPoeMainPseExtnDeviceDetectType INTEGER,
|
|
rcPortPoeMainPseExtnPwrLimit Integer32
|
|
}
|
|
|
|
rcPortPoeMainPseExtnGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies an interface
|
|
to a PSE port device. The interface identified by a
|
|
particular value of this index is the same interface
|
|
as identified by the same value of ifIndex."
|
|
::= { rcPortPoeMainPseExtnEntry 1 }
|
|
|
|
rcPortPoeMainPseExtnPwrAdmin OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies the group
|
|
containing the port to which a power Etherenet PSE
|
|
is connected. Group means box in the stack, module
|
|
in a rack and the value 1 MUST be used for
|
|
as identified by the same value of ifIndex."
|
|
DEFVAL { disable }
|
|
::= { rcPortPoeMainPseExtnEntry 2 }
|
|
|
|
rcPortPoeMainPseExtnPwrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
critical(1),
|
|
high(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies the group
|
|
containing the port to which a power Etherenet PSE
|
|
is connected. Group means box in the stack, module
|
|
in a rack and the value 1 MUST be used for
|
|
as identified by the same value of ifIndex."
|
|
DEFVAL { low }
|
|
::= { rcPortPoeMainPseExtnEntry 3 }
|
|
|
|
rcPortPoeMainPseExtnDeviceDetectType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
p802dot3af(1),
|
|
p802dot3afAndLegacy(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies the group
|
|
containing the port to which a power Etherenet PSE
|
|
is connected. Group means box in the stack, module
|
|
in a rack and the value 1 MUST be used for
|
|
as identified by the same value of ifIndex."
|
|
DEFVAL { p802dot3afAndLegacy }
|
|
::= { rcPortPoeMainPseExtnEntry 4 }
|
|
|
|
rcPortPoeMainPseExtnPwrLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (37..800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The maximum available PoE power of the main PSE
|
|
expressed in Watts."
|
|
DEFVAL { 200 }
|
|
::= { rcPortPoeMainPseExtnEntry 5 }
|
|
|
|
-- POE Pse Port extn table
|
|
|
|
rcPortPoePsePortExtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortPoePsePortExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port table"
|
|
::= { rcPortPoe 3 }
|
|
|
|
rcPortPoePsePortExtnEntry OBJECT-TYPE
|
|
SYNTAX RcPortPoePsePortExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular port"
|
|
INDEX { rcPortPoePsePortExtnGroupIndex,
|
|
rcPortPoePsePortExtnPortIndex }
|
|
::= { rcPortPoePsePortExtnTable 1 }
|
|
|
|
RcPortPoePsePortExtnEntry ::= SEQUENCE {
|
|
rcPortPoePsePortExtnGroupIndex Integer32,
|
|
rcPortPoePsePortExtnPortIndex Integer32,
|
|
rcPortPoePsePortExtnPwrLimit Integer32,
|
|
rcPortPoePsePortExtnMeasuredVolt Integer32,
|
|
rcPortPoePsePortExtnMeasuredCurrent Integer32,
|
|
rcPortPoePsePortExtnPwrConsumpt Integer32
|
|
|
|
}
|
|
|
|
rcPortPoePsePortExtnGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies an interface
|
|
to a PSE port device. The interface identified by a
|
|
particular value of this index is the same interface
|
|
as identified by the same value of ifIndex."
|
|
::= { rcPortPoePsePortExtnEntry 1 }
|
|
|
|
rcPortPoePsePortExtnPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies an interface
|
|
to a PSE port device. The interface identified by a
|
|
particular value of this index is the same interface
|
|
as identified by the same value of ifIndex."
|
|
::= { rcPortPoePsePortExtnEntry 2 }
|
|
|
|
rcPortPoePsePortExtnPwrLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (3..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies the group
|
|
containing the port to which a power Etherenet PSE
|
|
is connected. Group means box in the stack, module
|
|
in a rack and the value 1 MUST be used for
|
|
as identified by the same value of ifIndex."
|
|
DEFVAL { 16 }
|
|
::= { rcPortPoePsePortExtnEntry 3 }
|
|
|
|
rcPortPoePsePortExtnMeasuredVolt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies the group
|
|
containing the port to which a power Etherenet PSE
|
|
is connected. Group means box in the stack, module
|
|
in a rack and the value 1 MUST be used for
|
|
as identified by the same value of ifIndex."
|
|
::= { rcPortPoePsePortExtnEntry 4 }
|
|
|
|
rcPortPoePsePortExtnMeasuredCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies the group
|
|
containing the port to which a power Etherenet PSE
|
|
is connected. Group means box in the stack, module
|
|
in a rack and the value 1 MUST be used for
|
|
as identified by the same value of ifIndex."
|
|
::= { rcPortPoePsePortExtnEntry 5 }
|
|
|
|
rcPortPoePsePortExtnPwrConsumpt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies the group
|
|
containing the port to which a power Etherenet PSE
|
|
is connected. Group means box in the stack, module
|
|
in a rack and the value 1 MUST be used for
|
|
as identified by the same value of ifIndex."
|
|
::= { rcPortPoePsePortExtnEntry 6 }
|
|
|
|
|
|
-- Port Lock Group
|
|
|
|
rcPortLock OBJECT IDENTIFIER ::= { rcChassis 11 }
|
|
|
|
rcPortLockEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether the port lock feature is enabled."
|
|
DEFVAL { false }
|
|
::= { rcPortLock 1 }
|
|
|
|
rcPortLockLockedPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are administratively locked.
|
|
Locked ports cannot be modified in anyway until the
|
|
port is unlocked first."
|
|
::= { rcPortLock 2 }
|
|
|
|
-- PORT LACP
|
|
|
|
rcPortLacpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortLacpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port LACP table"
|
|
::= { rcPort 4 }
|
|
|
|
rcPortLacpEntry OBJECT-TYPE
|
|
SYNTAX RcPortLacpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular port"
|
|
INDEX { rcPortIndex }
|
|
::= { rcPortLacpTable 1 }
|
|
|
|
RcPortLacpEntry ::= SEQUENCE {
|
|
rcPortLacpAdminEnable TruthValue,
|
|
rcPortLacpOperEnable TruthValue,
|
|
rcPortLacpFastPeriodicTime INTEGER,
|
|
rcPortLacpSlowPeriodicTime INTEGER,
|
|
rcPortLacpTimeoutScale INTEGER,
|
|
rcPortLacpAggrWaitTime INTEGER,
|
|
rcPortLacpFastPeriodicTimeOper INTEGER,
|
|
rcPortLacpSlowPeriodicTimeOper INTEGER,
|
|
rcPortLacpTimeoutScaleOper INTEGER,
|
|
rcPortLacpAggrWaitTimeOper INTEGER,
|
|
rcPortLacpSuppressMisConfigLog TruthValue
|
|
}
|
|
|
|
rcPortLacpAdminEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administratively enable/disable LACP on a port"
|
|
DEFVAL { false }
|
|
::= { rcPortLacpEntry 1 }
|
|
|
|
rcPortLacpOperEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if LACP is operationally enabled or disabled
|
|
on a port"
|
|
::= { rcPortLacpEntry 2 }
|
|
|
|
rcPortLacpFastPeriodicTime OBJECT-TYPE
|
|
SYNTAX INTEGER (200..20000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of miliseconds between periodic transmissions
|
|
using Short Timeouts."
|
|
DEFVAL { 1000 }
|
|
::= { rcPortLacpEntry 3 }
|
|
|
|
rcPortLacpSlowPeriodicTime OBJECT-TYPE
|
|
SYNTAX INTEGER (10000..30000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of miliseconds between periodic transmissions
|
|
using LONG Timeouts."
|
|
DEFVAL { 30000 }
|
|
::= { rcPortLacpEntry 4 }
|
|
|
|
rcPortLacpTimeoutScale OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Scalar value used to calculate timeout time from
|
|
periodic time. Timeout = PeriodicTime * TimeoutScale"
|
|
DEFVAL { 3 }
|
|
::= { rcPortLacpEntry 5 }
|
|
|
|
rcPortLacpAggrWaitTime OBJECT-TYPE
|
|
SYNTAX INTEGER (200..2000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of mili seconds to delay aggregation to
|
|
allow multiple links to aggregate simultaneously."
|
|
DEFVAL { 2000 }
|
|
::= { rcPortLacpEntry 6 }
|
|
|
|
rcPortLacpFastPeriodicTimeOper OBJECT-TYPE
|
|
SYNTAX INTEGER (200..20000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operating value of fast periodic timer on the port."
|
|
::= { rcPortLacpEntry 7 }
|
|
|
|
rcPortLacpSlowPeriodicTimeOper OBJECT-TYPE
|
|
SYNTAX INTEGER (10000..30000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operating value of slow periodic timer on the port."
|
|
::= { rcPortLacpEntry 8 }
|
|
|
|
|
|
rcPortLacpTimeoutScaleOper OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operating value of timeout scale on the port."
|
|
::= { rcPortLacpEntry 9 }
|
|
|
|
rcPortLacpAggrWaitTimeOper OBJECT-TYPE
|
|
SYNTAX INTEGER (200..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operating value of aggreagate wait time on port."
|
|
::= { rcPortLacpEntry 10 }
|
|
|
|
rcPortLacpSuppressMisConfigLog OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Suppression of misconfiguration logs."
|
|
::= { rcPortLacpEntry 11 }
|
|
|
|
rcPortVLacpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortVLacpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Virtual LACP table"
|
|
::= { rcPort 5 }
|
|
|
|
rcPortVLacpEntry OBJECT-TYPE
|
|
SYNTAX RcPortVLacpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular port"
|
|
INDEX { rcPortIndex }
|
|
::= { rcPortVLacpTable 1 }
|
|
|
|
RcPortVLacpEntry ::= SEQUENCE {
|
|
rcPortVLacpAdminEnable TruthValue,
|
|
rcPortVLacpOperEnable TruthValue,
|
|
rcPortVLacpFastPeriodicTimer INTEGER,
|
|
rcPortVLacpSlowPeriodicTimer INTEGER,
|
|
rcPortVLacpTimeout INTEGER,
|
|
rcPortVLacpTimeoutScale INTEGER,
|
|
rcPortVLacpEtherType Integer32,
|
|
rcPortVLacpEtherMacAddress MacAddress,
|
|
rcPortVLacpPortState INTEGER,
|
|
rcPortVLacpDualHomingEnable TruthValue,
|
|
rcPortVLacpFlapDetectEnable TruthValue,
|
|
rcPortVLacpFlapFrequency Integer32,
|
|
rcPortVLacpFlapInterval Integer32,
|
|
rcPortVLacpTotalFlapCount Counter32,
|
|
rcPortVLacpFirstFlapTimeStamp DateAndTime,
|
|
rcPortVLacpLastFlapTimeStamp DateAndTime,
|
|
rcPortVLacpFlapClearStats TruthValue
|
|
}
|
|
|
|
rcPortVLacpAdminEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administratively enable/disable Virtual LACP on a port"
|
|
DEFVAL { false }
|
|
::= { rcPortVLacpEntry 1 }
|
|
|
|
rcPortVLacpOperEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if Virtual LACP is operationally enabled or
|
|
disabled on a port"
|
|
::= { rcPortVLacpEntry 2 }
|
|
|
|
rcPortVLacpFastPeriodicTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (10..20000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of miliseconds between periodic transmissions
|
|
using Short Timeouts"
|
|
DEFVAL { 200 }
|
|
::= { rcPortVLacpEntry 3 }
|
|
|
|
rcPortVLacpSlowPeriodicTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (10000..30000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of miliseconds between periodic transmissions
|
|
using LONG Timeouts."
|
|
DEFVAL { 30000 }
|
|
::= { rcPortVLacpEntry 4 }
|
|
|
|
rcPortVLacpTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
short(1),
|
|
long(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Timeout control value. Long or Short Timeout"
|
|
::= { rcPortVLacpEntry 5 }
|
|
|
|
rcPortVLacpTimeoutScale OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Scalar value used to calculate timeout time from
|
|
periodic time. Timeout = PeriodicTime * TimeoutScale"
|
|
DEFVAL { 3 }
|
|
::= { rcPortVLacpEntry 6 }
|
|
|
|
rcPortVLacpEtherType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "VLACP Protocol Identification. The id value is
|
|
in Hex. Range in hex (0x600..0xffff)"
|
|
DEFVAL { '8103'h }
|
|
::= { rcPortVLacpEntry 7 }
|
|
|
|
rcPortVLacpEtherMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Multicast Mac Address exclusively used for VLACPDU's"
|
|
::= { rcPortVLacpEntry 8 }
|
|
|
|
rcPortVLacpPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display the Vlacp Port State."
|
|
::= { rcPortVLacpEntry 9 }
|
|
|
|
rcPortVLacpDualHomingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Dual homing on Virtual LACP on a port"
|
|
DEFVAL { false }
|
|
::= { rcPortVLacpEntry 10 }
|
|
|
|
rcPortVLacpFlapDetectEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administratively enable/disable VLACP flap detection on a port"
|
|
DEFVAL { false }
|
|
::= { rcPortVLacpEntry 11 }
|
|
|
|
rcPortVLacpFlapFrequency OBJECT-TYPE
|
|
SYNTAX Integer32 (3..30)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of VLACP Flaps on a port, that if they occure within
|
|
rcPortVLacpFlapInterval seconds, the port is shutdown."
|
|
DEFVAL { 3 }
|
|
::= { rcPortVLacpEntry 12 }
|
|
|
|
rcPortVLacpFlapInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (10..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time inteval in seconds within which VLACP flaps on a port
|
|
are monitored."
|
|
DEFVAL { 60 }
|
|
::= { rcPortVLacpEntry 13 }
|
|
|
|
rcPortVLacpTotalFlapCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Number of VLACP flaps detected on this port
|
|
since either enabling VLACP or clearing the counter."
|
|
::= { rcPortVLacpEntry 14 }
|
|
|
|
rcPortVLacpFirstFlapTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the first VLACP flap detected on this port
|
|
since either enabling VLACP or clearing the timer."
|
|
::= { rcPortVLacpEntry 15 }
|
|
|
|
rcPortVLacpLastFlapTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the latest VLACP flap detected on this port
|
|
since either enabling VLACP or clearing the timer."
|
|
::= { rcPortVLacpEntry 16 }
|
|
|
|
rcPortVLacpFlapClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clears all VLACP flap counters and timers."
|
|
::= { rcPortVLacpEntry 17 }
|
|
|
|
-- Port Remote Mirroring Table
|
|
|
|
rcPortRemoteMirroringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortRemoteMirroringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Remote Mirroring Table"
|
|
::= { rcPort 6 }
|
|
|
|
rcPortRemoteMirroringEntry OBJECT-TYPE
|
|
SYNTAX RcPortRemoteMirroringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing remote mirroring info. for a
|
|
particular port"
|
|
INDEX { rcPortRemoteMirroringIndex }
|
|
::= { rcPortRemoteMirroringTable 1 }
|
|
|
|
RcPortRemoteMirroringEntry ::= SEQUENCE {
|
|
rcPortRemoteMirroringIndex InterfaceIndex,
|
|
rcPortRemoteMirroringEnable TruthValue,
|
|
rcPortRemoteMirroringMode INTEGER,
|
|
rcPortRemoteMirroringSrcMac MacAddress,
|
|
rcPortRemoteMirroringDstMac MacAddress,
|
|
rcPortRemoteMirroringEtherType INTEGER,
|
|
rcPortRemoteMirroringVlanIdListSize INTEGER,
|
|
rcPortRemoteMirroringVlanIdList OCTET STRING,
|
|
rcPortRemoteMirroringRowStatus RowStatus
|
|
}
|
|
|
|
|
|
rcPortRemoteMirroringIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { rcPortRemoteMirroringEntry 1 }
|
|
|
|
rcPortRemoteMirroringEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable remote Mirroring for the port"
|
|
DEFVAL { false }
|
|
::= { rcPortRemoteMirroringEntry 2 }
|
|
|
|
rcPortRemoteMirroringMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
source(1),
|
|
termination(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Mode in which remote mirroring is enabled"
|
|
DEFVAL { source }
|
|
::= { rcPortRemoteMirroringEntry 3 }
|
|
|
|
rcPortRemoteMirroringSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source Mac of the remote mirrored packet.
|
|
Remote mirroring packet will be send with
|
|
this source mac address"
|
|
::= { rcPortRemoteMirroringEntry 4 }
|
|
|
|
|
|
rcPortRemoteMirroringDstMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination Mac of the remote mirrored packet.
|
|
Packets will be bridged to this mac address.
|
|
Remote mirroring packet will be send to this
|
|
mac address"
|
|
::= { rcPortRemoteMirroringEntry 5 }
|
|
|
|
rcPortRemoteMirroringEtherType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ethertype of the remote mirrored packet. Packets
|
|
will be send with this ethertype"
|
|
DEFVAL { '8103'h }
|
|
::= { rcPortRemoteMirroringEntry 6 }
|
|
|
|
rcPortRemoteMirroringVlanIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of VLAN IDs
|
|
that are assigned to this port."
|
|
::= { rcPortRemoteMirroringEntry 7 }
|
|
|
|
rcPortRemoteMirroringVlanIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4096))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This field is used only if the port is assigned as
|
|
remote mirroring termination port. Represents zero
|
|
or more filter lists vlan in which the Destination
|
|
Mac address resides. Each VLAN ID is stored as
|
|
two bytes in this array starting from offset zero.
|
|
Any unused bytes should be set to zero."
|
|
::= { rcPortRemoteMirroringEntry 8 }
|
|
|
|
rcPortRemoteMirroringRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "RowStatus"
|
|
::= { rcPortRemoteMirroringEntry 9 }
|
|
|
|
|
|
-- Start of Vlacp session
|
|
rcPortVlacpSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortVlacpSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain Vlacp session values."
|
|
::= { rcPort 7 }
|
|
|
|
rcPortVlacpSessionEntry OBJECT-TYPE
|
|
SYNTAX RcPortVlacpSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing Vlacp Session information
|
|
regarding a particular port or mlt."
|
|
INDEX { rcPortVlacpSessionIfIndex,
|
|
rcPortVlacpSessionSesNumber }
|
|
::= { rcPortVlacpSessionTable 1 }
|
|
|
|
RcPortVlacpSessionEntry ::= SEQUENCE {
|
|
rcPortVlacpSessionIfIndex Integer32,
|
|
rcPortVlacpSessionSesNumber Integer32,
|
|
rcPortVlacpSessionSrcMacAddress MacAddress,
|
|
rcPortVlacpSessionRxTimer Integer32,
|
|
rcPortVlacpSessionValidbit INTEGER,
|
|
rcPortVlacpSessionInPktCount Integer32
|
|
}
|
|
|
|
rcPortVlacpSessionIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IfIndex of the port or Mlt"
|
|
::= { rcPortVlacpSessionEntry 1 }
|
|
|
|
rcPortVlacpSessionSesNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Session number of an IfIndex"
|
|
::= { rcPortVlacpSessionEntry 2 }
|
|
|
|
rcPortVlacpSessionSrcMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac Address for the session"
|
|
::= { rcPortVlacpSessionEntry 3 }
|
|
|
|
rcPortVlacpSessionRxTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Rx timer for the session"
|
|
::= { rcPortVlacpSessionEntry 4 }
|
|
|
|
rcPortVlacpSessionValidbit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inValidSession(0),
|
|
validSession(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The valid bit for the session"
|
|
::= { rcPortVlacpSessionEntry 5 }
|
|
|
|
rcPortVlacpSessionInPktCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The In packet count for the session"
|
|
::= { rcPortVlacpSessionEntry 6 }
|
|
|
|
-- End of Vlacp session
|
|
|
|
-- Management port details
|
|
|
|
rcPortMgmtLinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortMgmtLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port card mgmt port link table"
|
|
::= { rcPort 8 }
|
|
|
|
rcPortMgmtLinkEntry OBJECT-TYPE
|
|
SYNTAX RcPortMgmtLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular mgmt port in I/O
|
|
card"
|
|
INDEX { rcPortMgmtLinkIndex }
|
|
::= { rcPortMgmtLinkTable 1 }
|
|
|
|
RcPortMgmtLinkEntry ::= SEQUENCE {
|
|
rcPortMgmtLinkIndex InterfaceIndex,
|
|
rcPortMgmtLinkDescr DisplayString,
|
|
rcPortMgmtLinkOperStatus INTEGER,
|
|
rcPortMgmtLinkAutoNegotiate TruthValue,
|
|
rcPortMgmtLinkDuplex INTEGER,
|
|
rcPortMgmtLinkSpeed INTEGER
|
|
}
|
|
|
|
rcPortMgmtLinkIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IfIndex of the port."
|
|
::= { rcPortMgmtLinkEntry 1 }
|
|
|
|
rcPortMgmtLinkDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port description"
|
|
::= { rcPortMgmtLinkEntry 2 }
|
|
|
|
rcPortMgmtLinkOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "admin status of the mgmt port"
|
|
::= { rcPortMgmtLinkEntry 3 }
|
|
|
|
rcPortMgmtLinkAutoNegotiate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Auto-negotiation status of the port"
|
|
::= { rcPortMgmtLinkEntry 4 }
|
|
|
|
rcPortMgmtLinkDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
half(1),
|
|
full(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "duplex setting for the port"
|
|
::= { rcPortMgmtLinkEntry 5 }
|
|
|
|
rcPortMgmtLinkSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
mbps10(1), -- 10Mb/s
|
|
mbps100(2), -- 100Mb/s
|
|
mbps1000(3) -- 1000Mb/s
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "speed setting for this port."
|
|
::= { rcPortMgmtLinkEntry 6 }
|
|
|
|
-- PORT FlushFdbTable
|
|
|
|
rcPortFlushFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortFlushFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Flush Fdbtable"
|
|
::= { rcPort 9 }
|
|
|
|
rcPortFlushFdbEntry OBJECT-TYPE
|
|
SYNTAX RcPortFlushFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "port based deletion of mac addresses
|
|
learned or discarded on that port"
|
|
INDEX { rcPortIndex }
|
|
::= { rcPortFlushFdbTable 1 }
|
|
|
|
RcPortFlushFdbEntry ::= SEQUENCE {
|
|
rcPortFlushFdbAddress DisplayString,
|
|
rcPortFlushFdbVlanId Integer32
|
|
}
|
|
|
|
rcPortFlushFdbAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (17))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Mac Address to be deleted."
|
|
::= { rcPortFlushFdbEntry 1 }
|
|
|
|
rcPortFlushFdbVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "vlan Id associated with the Mac Address"
|
|
::= { rcPortFlushFdbEntry 2 }
|
|
|
|
-- ===========================================================================
|
|
-- Port Lock Group
|
|
-- ===========================================================================
|
|
|
|
rcPortRemotePortShutdownTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortRemotePortShutdownEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of RemotePortShutdown port info."
|
|
::= { rcPort 10 }
|
|
|
|
rcPortRemotePortShutdownEntry OBJECT-TYPE
|
|
SYNTAX RcPortRemotePortShutdownEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A RemotePortShutdown table entry."
|
|
INDEX { rcPortRemotePortShutdownIfIndex }
|
|
::= { rcPortRemotePortShutdownTable 1 }
|
|
|
|
RcPortRemotePortShutdownEntry ::=
|
|
SEQUENCE {
|
|
rcPortRemotePortShutdownIfIndex InterfaceIndex,
|
|
rcPortRemotePortShutdownEnabled TruthValue,
|
|
rcPortRemotePortShutdownHoldTimer Integer32,
|
|
rcPortRemotePortShutdownStatus INTEGER,
|
|
rcPortRemotePortShutdownLocalMacAddress MacAddress,
|
|
rcPortRemotePortShutdownRemoteMacAddress MacAddress
|
|
}
|
|
|
|
rcPortRemotePortShutdownIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value for a port."
|
|
::= { rcPortRemotePortShutdownEntry 1 }
|
|
|
|
rcPortRemotePortShutdownEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether the Remote-Port-Shutdown feature is
|
|
enabled or disabled on a port."
|
|
DEFVAL { false }
|
|
::= { rcPortRemotePortShutdownEntry 2 }
|
|
|
|
rcPortRemotePortShutdownHoldTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the time period after a port has been shutdown during which
|
|
it will remain down, regardless of any CCMs received during that time
|
|
period."
|
|
DEFVAL { 3 }
|
|
::= { rcPortRemotePortShutdownEntry 3 }
|
|
|
|
rcPortRemotePortShutdownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
down (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether a port is shutdown by the remote port
|
|
shutdown feature."
|
|
::= { rcPortRemotePortShutdownEntry 4 }
|
|
|
|
rcPortRemotePortShutdownLocalMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local MAC address."
|
|
::= { rcPortRemotePortShutdownEntry 5 }
|
|
|
|
rcPortRemotePortShutdownRemoteMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote MAC address."
|
|
::= { rcPortRemotePortShutdownEntry 6 }
|
|
|
|
-- Port Flush Mac Table
|
|
|
|
rcPortFlushMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortFlushMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Flush MAC entry on a port."
|
|
::= { rcPort 11 }
|
|
|
|
rcPortFlushMacEntry OBJECT-TYPE
|
|
SYNTAX RcPortFlushMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port mac flush table entry."
|
|
INDEX { rcPortFlushMacPortNum }
|
|
::= { rcPortFlushMacTable 1 }
|
|
|
|
RcPortFlushMacEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcPortFlushMacPortNum INTEGER,
|
|
rcPortFlushMacAddr OCTET STRING,
|
|
rcPortFlushMacVlanId INTEGER
|
|
}
|
|
|
|
rcPortFlushMacPortNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port number where the mac record exists."
|
|
::= { rcPortFlushMacEntry 1 }
|
|
|
|
rcPortFlushMacAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(17))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Mac Address that needs to be removed."
|
|
::= { rcPortFlushMacEntry 2 }
|
|
|
|
rcPortFlushMacVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id associated with the Mac Address."
|
|
::= { rcPortFlushMacEntry 3 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- LLDP-MED - Local Device Information
|
|
------------------------------------------------------------------------------
|
|
---
|
|
--- rcLldpXMedLocMediaPolicyTable: Local Media Policy
|
|
--- Information Table
|
|
---
|
|
---
|
|
rcLldpXMedLocMediaPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcLldpXMedLocMediaPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per policy type per port
|
|
of media policy information (as a part of the MED
|
|
organizational extension) on the local system known
|
|
to this agent."
|
|
::= { rcPort 12 }
|
|
|
|
rcLldpXMedLocMediaPolicyEntry OBJECT-TYPE
|
|
SYNTAX RcLldpXMedLocMediaPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular policy on a specific
|
|
port component."
|
|
INDEX { rcLldpXMedLocMediaPolicyPortNum, rcLldpXMedLocMediaPolicyAppType }
|
|
::= { rcLldpXMedLocMediaPolicyTable 1 }
|
|
|
|
RcLldpXMedLocMediaPolicyEntry ::=
|
|
SEQUENCE {
|
|
rcLldpXMedLocMediaPolicyPortNum InterfaceIndex,
|
|
rcLldpXMedLocMediaPolicyAppType PolicyAppType,
|
|
rcLldpXMedLocMediaPolicyVlanID Integer32,
|
|
rcLldpXMedLocMediaPolicyPriority Integer32,
|
|
rcLldpXMedLocMediaPolicyDscp Integer32,
|
|
rcLldpXMedLocMediaPolicyUnknown TruthValue,
|
|
rcLldpXMedLocMediaPolicyTagged TruthValue,
|
|
rcLldpXMedLocMediaPolicyRowStatus RowStatus
|
|
}
|
|
|
|
rcLldpXMedLocMediaPolicyPortNum OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { rcLldpXMedLocMediaPolicyEntry 1 }
|
|
|
|
rcLldpXMedLocMediaPolicyAppType OBJECT-TYPE
|
|
SYNTAX PolicyAppType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The media type that defines the primary function of the
|
|
application for the policy advertised by an endpoint."
|
|
REFERENCE
|
|
"ANSI/TIA-1057, Section 10.2.3.1"
|
|
::= { rcLldpXMedLocMediaPolicyEntry 2 }
|
|
|
|
rcLldpXMedLocMediaPolicyVlanID OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..4094|4095)
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An extension of the VLAN Identifier for the port,
|
|
as defined in IEEE 802.1P-1998.
|
|
|
|
|
|
A value of 1 through 4094 is used to define a valid PVID.
|
|
|
|
A value of 0 shall be used if the device is using priority tagged
|
|
frames, meaning that only the 802.1p priority level is significant
|
|
and the default VID of the ingress port is being used instead.
|
|
|
|
A value of 4095 is reserved for implementation use."
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.5"
|
|
::= { rcLldpXMedLocMediaPolicyEntry 3 }
|
|
|
|
rcLldpXMedLocMediaPolicyPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the 802.1p priority
|
|
which is associated with the given port on the
|
|
local system."
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.6 "
|
|
::= { rcLldpXMedLocMediaPolicyEntry 4 }
|
|
|
|
rcLldpXMedLocMediaPolicyDscp OBJECT-TYPE
|
|
SYNTAX Integer32(0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the Differentiated Service
|
|
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
|
|
which is associated with the given port on the local system."
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.7"
|
|
::= { rcLldpXMedLocMediaPolicyEntry 5 }
|
|
|
|
rcLldpXMedLocMediaPolicyUnknown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value of 'true' indicates that the
|
|
network policy for the specified application type is
|
|
currently unknown. In this case, the VLAN ID, the
|
|
layer 2 priority and the DSCP value fields are ignored.
|
|
A value of 'false' indicates that this network policy
|
|
is defined "
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.2"
|
|
::= { rcLldpXMedLocMediaPolicyEntry 6 }
|
|
|
|
rcLldpXMedLocMediaPolicyTagged OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value of 'true' indicates that the application is using a
|
|
|
|
tagged VLAN.
|
|
A value of 'false' indicates that for the specific application
|
|
the device either is using an untagged VLAN or does not
|
|
support port based VLAN operation. In this case, both the
|
|
VLAN ID and the Layer 2 priority fields are ignored and
|
|
only the DSCP value has relevance "
|
|
REFERENCE
|
|
" ANSI/TIA-1057, Section 10.2.3.3"
|
|
::= { rcLldpXMedLocMediaPolicyEntry 7 }
|
|
|
|
rcLldpXMedLocMediaPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to create/delete entries."
|
|
|
|
::= { rcLldpXMedLocMediaPolicyEntry 8 }
|
|
|
|
--
|
|
-- Lossless Ethernet Port Table
|
|
|
|
rcPortLosslessEnetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortLosslessEnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Lossless Ethernet Table"
|
|
::= { rcPort 13 }
|
|
|
|
rcPortLosslessEnetEntry OBJECT-TYPE
|
|
SYNTAX RcPortLosslessEnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing lossless Ethernet information
|
|
for a particular port."
|
|
INDEX { rcPortLosslessEnetIndex }
|
|
::= { rcPortLosslessEnetTable 1 }
|
|
|
|
RcPortLosslessEnetEntry ::= SEQUENCE {
|
|
rcPortLosslessEnetIndex InterfaceIndex,
|
|
rcPortLosslessEnetConfigured TruthValue,
|
|
rcPortLosslessEnetPauseType INTEGER,
|
|
rcPortLosslessEnetPfcBandwidth Integer32
|
|
}
|
|
|
|
rcPortLosslessEnetIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2.
|
|
Lossless Ethernet will be limited to 10Gig
|
|
ports."
|
|
::= { rcPortLosslessEnetEntry 1 }
|
|
|
|
rcPortLosslessEnetConfigured OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable lossless mode for the port"
|
|
DEFVAL { false }
|
|
::= { rcPortLosslessEnetEntry 2 }
|
|
|
|
rcPortLosslessEnetPauseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fc(1),
|
|
pfc(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Pause frame type. fc - Pause,
|
|
pfc - priority-based flow control."
|
|
DEFVAL { fc }
|
|
::= { rcPortLosslessEnetEntry 3 }
|
|
|
|
rcPortLosslessEnetPfcBandwidth OBJECT-TYPE
|
|
SYNTAX Integer32(2..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Guaranteed bandwidth in Gbps when
|
|
rcPortLosslessEnetPauseType is set to pfc(2)."
|
|
DEFVAL { 5 }
|
|
::= { rcPortLosslessEnetEntry 4 }
|
|
|
|
rcChannelizedPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcChannelizedPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port table for all channelized capable ports."
|
|
::= { rcPort 14 }
|
|
|
|
rcChannelizedPortEntry OBJECT-TYPE
|
|
SYNTAX RcChannelizedPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info for a key port of channelized
|
|
capable port."
|
|
INDEX { rcChannelizedPortIndex }
|
|
::= { rcChannelizedPortTable 1 }
|
|
|
|
RcChannelizedPortEntry ::= SEQUENCE {
|
|
rcChannelizedPortIndex InterfaceIndex,
|
|
rcChannelizedPortChannelType INTEGER,
|
|
rcChannelizedPortAdminMode TruthValue
|
|
}
|
|
|
|
rcChannelizedPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port which is
|
|
channelized capable."
|
|
::= { rcChannelizedPortEntry 1 }
|
|
|
|
rcChannelizedPortChannelType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fortyGig(1),
|
|
hundredGig(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port channelized type. Either 40G or 100G."
|
|
::= { rcChannelizedPortEntry 2 }
|
|
|
|
rcChannelizedPortAdminMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administratively enable/disable the port channelized mode."
|
|
DEFVAL {false}
|
|
::= { rcChannelizedPortEntry 3 }
|
|
|
|
rcPortExtendTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortExtendEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port extend table."
|
|
::= { rcPort 15 }
|
|
|
|
rcPortExtendEntry OBJECT-TYPE
|
|
SYNTAX RcPortExtendEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info for a key port."
|
|
AUGMENTS {
|
|
rcPortEntry
|
|
}
|
|
::= { rcPortExtendTable 1 }
|
|
|
|
RcPortExtendEntry ::= SEQUENCE {
|
|
rcPortExtendPortDisplayFormat DisplayString
|
|
}
|
|
|
|
rcPortExtendPortDisplayFormat OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..9))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port format to display."
|
|
::= { rcPortExtendEntry 1 }
|
|
|
|
-- VLACP Statistics Table
|
|
|
|
rcPortVlacpStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPortVlacpStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains VLACP information
|
|
about every port that is associated with this device.
|
|
A row appears in this table for each physical port."
|
|
::= { rcPort 16 }
|
|
|
|
rcPortVlacpStatsEntry OBJECT-TYPE
|
|
SYNTAX RcPortVlacpStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Virtual Link Aggregation Control Protocol statistics
|
|
for each port on this device."
|
|
INDEX { rcPortVlacpIndex }
|
|
::= { rcPortVlacpStatsTable 1 }
|
|
|
|
RcPortVlacpStatsEntry ::=
|
|
SEQUENCE {
|
|
rcPortVlacpIndex
|
|
InterfaceIndex,
|
|
rcPortVlacpStatsLACPDUsRx
|
|
Counter32,
|
|
rcPortVlacpStatsLACPDUsTx
|
|
Counter32,
|
|
rcPortVlacpStatsLACPDUsMismatch
|
|
Counter32
|
|
}
|
|
|
|
rcPortVlacpIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of VLACP ports"
|
|
::= { rcPortVlacpStatsEntry 1 }
|
|
|
|
rcPortVlacpStatsLACPDUsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid VLACPDUs received on this
|
|
Port. This value is read-only."
|
|
::= { rcPortVlacpStatsEntry 2 }
|
|
|
|
rcPortVlacpStatsLACPDUsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VLACPDUs transmitted on this
|
|
Port. This value is read-only."
|
|
::= { rcPortVlacpStatsEntry 3 }
|
|
|
|
rcPortVlacpStatsLACPDUsMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of mismatched VLACPDUs in terms of seq-num RX'ed
|
|
on this Port. This value is read-only."
|
|
::= { rcPortVlacpStatsEntry 4 }
|
|
|
|
-- Additional Chassis Group Variables
|
|
|
|
rcChasAruMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
aruOne(1),
|
|
aruTwo(2),
|
|
aruThree(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The ARU mode the chassis is operating in."
|
|
::= { rcChassis 12 }
|
|
|
|
rcChasQuidMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
quidMixed(1),
|
|
quidTwo(2),
|
|
quidThree(3),
|
|
quidFour(4),
|
|
quidFive(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Quid mode the chassis is operating in."
|
|
::= { rcChassis 13 }
|
|
|
|
rcChasEocModeAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
default(0),
|
|
aru1Quid4(1),
|
|
aru2Quid4(2),
|
|
aru2Quid5(3),
|
|
aru3Quid4(4),
|
|
aru3Quid5(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the Enforce Operational
|
|
Configuration Mode(EOC) of the system. When a
|
|
device is configured with hardware of different
|
|
revisions, the system will initialize in some
|
|
deterministic manner (e.g., the lowest common
|
|
denominator that makes sense based on the hardware
|
|
configuration). This is the 'default(0)' mode.
|
|
The user can override this behavior by manually
|
|
specifying the EOC Mode they would like."
|
|
::= { rcChassis 14 }
|
|
|
|
rcChasEocModeOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
default(0),
|
|
aru1Quid4(1),
|
|
aru2Quid4(2),
|
|
aru2Quid5(3),
|
|
aru3Quid4(4),
|
|
aru3Quid5(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the Enforce Operational
|
|
Configuration Mode(EOC) of the system."
|
|
::= { rcChassis 15 }
|
|
|
|
rcChasBrouterPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate which ports in the system are
|
|
configured as Brouter ports."
|
|
::= { rcChassis 17 }
|
|
|
|
rcChasGlobalFilterEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable global filters in the
|
|
system. This variable is currently not supported."
|
|
DEFVAL { false }
|
|
::= { rcChassis 18 }
|
|
|
|
rcChasVlanBySrcMacEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable source MAC based VLANs
|
|
in the system."
|
|
DEFVAL { false }
|
|
::= { rcChassis 19 }
|
|
|
|
rcChasDiffServEcnCompatibilityEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable the Explicit Congestion
|
|
Notification(ECN) compatibility feature.
|
|
When set to FALSE , the system will mask the ECN bits
|
|
in the DS field while re-marking DSCP and will not match
|
|
on ECN capable flows if filter is set on DSmatch.
|
|
When set to TRUE, it will preserve the ECN bits in the DS
|
|
field while re-marking and will match on full 8-bit DS field."
|
|
DEFVAL { false }
|
|
::= { rcChassis 20 }
|
|
|
|
|
|
rcChasNewEnhancedOperMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enhanced operational mode."
|
|
::= { rcChassis 21 }
|
|
|
|
rcChasNewEMMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This configuration is for enabling/disabling 128K
|
|
mode. The change will take effect upon reboot."
|
|
::= { rcChassis 22 }
|
|
|
|
rcChasEmModeError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
non128KCardOffLine(2),
|
|
checkSlaveConfigNResetForEmMMode(3),
|
|
mismatchResetForEmMode(4),
|
|
mismatchEmModeMasterSlave(5),
|
|
incompatMasterResetForEmMode(6),
|
|
putSlaveOffEmImcompat(7),
|
|
slave8690EmIncompatGoingOffline(8),
|
|
cpu8690DisableEm(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the Em-mode error status"
|
|
::= { rcChassis 23 }
|
|
|
|
rcChasEnhancedOperMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Enhanced Operational mode the switch currently has
|
|
booted and will remain the same until the next reboot."
|
|
::= { rcChassis 24 }
|
|
|
|
rcChasEMMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EM mode the switch currently has booted and
|
|
will remain the same until the next reboot."
|
|
::= { rcChassis 25 }
|
|
|
|
rcChasFtpDaemonInSecondaryCpu OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable FTP daemon in 2nd cpu."
|
|
DEFVAL { false }
|
|
::= { rcChassis 26 }
|
|
|
|
rcChasSmltOnSingleCpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable SMLT on single CP feature in the switch
|
|
Not supported in VSP 3.3"
|
|
::= { rcChassis 27 }
|
|
|
|
rcChasNewVlanOptmMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vlan Optimization mode."
|
|
::= { rcChassis 28 }
|
|
|
|
rcChasVlanOptmMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan Optimization mode the switch currently has
|
|
booted and will remain the same until the next
|
|
reboot."
|
|
::= { rcChassis 29 }
|
|
|
|
-- rcLaunchPad Table
|
|
|
|
rcLaunchPad OBJECT IDENTIFIER ::= { rcChassis 30 }
|
|
|
|
rcLaunchPadTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcLaunchPadEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Launch Pad in a chassis table"
|
|
::= { rcLaunchPad 1 }
|
|
|
|
rcLaunchPadEntry OBJECT-TYPE
|
|
SYNTAX RcLaunchPadEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing Launch pad card info"
|
|
INDEX { rcLaunchPadSlotId, rcLaunchPadMiniSlotId }
|
|
::= { rcLaunchPadTable 1 }
|
|
|
|
RcLaunchPadEntry ::= SEQUENCE {
|
|
rcLaunchPadSlotId Integer32,
|
|
rcLaunchPadMiniSlotId Integer32,
|
|
rcLaunchPadAppType INTEGER,
|
|
rcLaunchPadMiniSlotIp IpAddress,
|
|
rcLaunchPadNaapLpState EnableValue,
|
|
rcLaunchPadMiniSlotSwVersion DisplayString,
|
|
rcLaunchPadHWType INTEGER
|
|
}
|
|
|
|
rcLaunchPadSlotId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Launch Pad card id"
|
|
::= { rcLaunchPadEntry 1 }
|
|
|
|
rcLaunchPadMiniSlotId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Launch pad mini card id."
|
|
::= { rcLaunchPadEntry 2 }
|
|
|
|
rcLaunchPadAppType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
firewall(2),
|
|
ssl(3),
|
|
ids(4),
|
|
vpn(5),
|
|
tps(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Launch Pad application type."
|
|
::= { rcLaunchPadEntry 3 }
|
|
|
|
rcLaunchPadMiniSlotIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Launch Pad mini card's ip address."
|
|
::= { rcLaunchPadEntry 4 }
|
|
|
|
rcLaunchPadNaapLpState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable naap Ip state."
|
|
::= { rcLaunchPadEntry 5 }
|
|
|
|
rcLaunchPadMiniSlotSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Launch Pad mini card's SW version."
|
|
::= { rcLaunchPadEntry 6 }
|
|
|
|
rcLaunchPadHWType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fw(1),
|
|
tps(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "for identifying the ISD"
|
|
::= { rcLaunchPadEntry 7 }
|
|
|
|
-- rcLaunchPad Cluster Table
|
|
|
|
rcLaunchPadClusterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcLaunchPadClusterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Launch Pad Cluster Table"
|
|
::= { rcLaunchPad 2 }
|
|
|
|
rcLaunchPadClusterEntry OBJECT-TYPE
|
|
SYNTAX RcLaunchPadClusterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing Launch pad cluster info"
|
|
INDEX { rcLaunchPadClusterId }
|
|
::= { rcLaunchPadClusterTable 1 }
|
|
|
|
RcLaunchPadClusterEntry ::= SEQUENCE {
|
|
rcLaunchPadClusterId INTEGER,
|
|
rcLaunchPadClusterType INTEGER,
|
|
rcLaunchPadClusterSize INTEGER,
|
|
rcLaunchPadClusterMembers OCTET STRING,
|
|
rcLaunchPadClusterRowStatus RowStatus,
|
|
rcLaunchPadClusterMgmtVlan INTEGER,
|
|
rcLaunchPadClusterSyncVlan INTEGER,
|
|
rcLaunchPadClusterTpsSize INTEGER,
|
|
rcLaunchPadClusterTpsMembers OCTET STRING,
|
|
rcLaunchPadClusterPortMember PortSet
|
|
}
|
|
|
|
rcLaunchPadClusterId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Launch pad cluster id."
|
|
::= { rcLaunchPadClusterEntry 1 }
|
|
|
|
rcLaunchPadClusterType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
firewall(1),
|
|
ssl(2),
|
|
is(3),
|
|
vpn(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Launch Pad cluster type."
|
|
::= { rcLaunchPadClusterEntry 2 }
|
|
|
|
rcLaunchPadClusterSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Launch pad cluster size."
|
|
::= { rcLaunchPadClusterEntry 3 }
|
|
|
|
rcLaunchPadClusterMembers OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Launch pad cluster members"
|
|
::= { rcLaunchPadClusterEntry 4 }
|
|
|
|
rcLaunchPadClusterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Launch pad cluster Row Status"
|
|
::= { rcLaunchPadClusterEntry 5 }
|
|
|
|
rcLaunchPadClusterMgmtVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Launch pad cluster management vlan Id."
|
|
::= { rcLaunchPadClusterEntry 6 }
|
|
|
|
rcLaunchPadClusterSyncVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Launch pad cluster cp sync vlan Id."
|
|
::= { rcLaunchPadClusterEntry 7 }
|
|
|
|
rcLaunchPadClusterTpsSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Launch pad cluster TPS size."
|
|
::= { rcLaunchPadClusterEntry 8 }
|
|
|
|
|
|
rcLaunchPadClusterTpsMembers OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Launch pad cluster TPS members"
|
|
::= { rcLaunchPadClusterEntry 9 }
|
|
|
|
rcLaunchPadClusterPortMember OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IS cluster user port list that needs to be monitored"
|
|
::= { rcLaunchPadClusterEntry 10 }
|
|
|
|
|
|
rcChasNaapEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable/disbale to napp feature."
|
|
::= { rcChassis 31 }
|
|
|
|
rcChasGlobalFilterOrderingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global Filter ordering in the system."
|
|
DEFVAL { false }
|
|
::= { rcChassis 32 }
|
|
|
|
rcChasNewGlobalFilterOrderingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This configuration is for enabling/disabling
|
|
global filter ordering. The change will take
|
|
effect upon reboot."
|
|
DEFVAL { false }
|
|
::= { rcChassis 33 }
|
|
|
|
rcChasWsmDirectMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is for enabling/disabling configuration
|
|
of same community strings on the WSM and 8600/8800.
|
|
This is for allowing users to connect directly
|
|
via SNMP to the WSM blade."
|
|
DEFVAL { false }
|
|
::= { rcChassis 34 }
|
|
|
|
rcChasRspMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This configuration is for enabling/disabling 256K
|
|
mode. The change will take effect upon reboot."
|
|
::= { rcChassis 35 }
|
|
|
|
rcChasRspOperMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "R-mode the switch currently has booted and
|
|
will remain the same until the next reboot."
|
|
::= { rcChassis 36 }
|
|
|
|
rcChasRspModeError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
non256KCardOffLine(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the r-mode error status"
|
|
::= { rcChassis 37 }
|
|
|
|
rcChasPOE OBJECT IDENTIFIER ::= { rcChassis 38 }
|
|
|
|
rcChasPOEPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total PoE power which this chassis
|
|
supports (Unit in Watts)."
|
|
::= { rcChasPOE 1 }
|
|
|
|
rcChasPOEAllocatedPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total PoE power allocated for PoE modules
|
|
installed in this chassis (Unit in Watts)."
|
|
::= { rcChasPOE 2 }
|
|
|
|
rcChasPOEAvailablePower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total PoE power available for any
|
|
additional PoE power request or allocation
|
|
(Unit in Watts)."
|
|
::= { rcChasPOE 3 }
|
|
|
|
rcChasPOEBackUpPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total PoE power reserved for backup or
|
|
redundancy (Unit in Watts)."
|
|
::= { rcChasPOE 4 }
|
|
|
|
-- rcRepeater
|
|
|
|
rcRepeater OBJECT IDENTIFIER ::= { rcChassis 39 }
|
|
|
|
rcRepeaterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcRepeaterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port repeater table"
|
|
::= { rcRepeater 1 }
|
|
|
|
rcRepeaterEntry OBJECT-TYPE
|
|
SYNTAX RcRepeaterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular repeater"
|
|
INDEX { rcRepeaterId }
|
|
::= { rcRepeaterTable 1 }
|
|
|
|
RcRepeaterEntry ::= SEQUENCE {
|
|
rcRepeaterId Integer32,
|
|
rcRepeaterFirstPort InterfaceIndex,
|
|
rcRepeaterSecondPort InterfaceIndex,
|
|
rcRepeaterVlanId Integer32,
|
|
rcRepeaterName DisplayString,
|
|
rcRepeaterRowStatus RowStatus
|
|
}
|
|
|
|
rcRepeaterId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the repeater."
|
|
::= { rcRepeaterEntry 1 }
|
|
|
|
rcRepeaterFirstPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "First port member of the Repeater"
|
|
::= { rcRepeaterEntry 2 }
|
|
|
|
rcRepeaterSecondPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Second port member of the Repeater"
|
|
::= { rcRepeaterEntry 3 }
|
|
|
|
rcRepeaterVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual LAN
|
|
associated with first port"
|
|
::= { rcRepeaterEntry 4 }
|
|
|
|
rcRepeaterName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this repeater."
|
|
::= { rcRepeaterEntry 5 }
|
|
|
|
rcRepeaterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcRepeater."
|
|
::= { rcRepeaterEntry 6 }
|
|
|
|
rcChasMcastCheckPktEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable Multicast check packet in the
|
|
system. This change will take effect upon reboot."
|
|
DEFVAL { true }
|
|
::= { rcChassis 40 }
|
|
|
|
rcChasSystemMonitorEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable System monitoring in the switch"
|
|
DEFVAL { true }
|
|
::= { rcChassis 41 }
|
|
|
|
rcChasSysMonMonitoringEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Dyanamically Enable/Disable SystemMonitor monitoring
|
|
engine in the switch"
|
|
DEFVAL { true }
|
|
::= { rcChassis 42 }
|
|
|
|
rcChasSysMonDetectionTime OBJECT-TYPE
|
|
SYNTAX INTEGER (10..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "System Monitor Detection time in seconds"
|
|
DEFVAL { 30 }
|
|
::= { rcChassis 43 }
|
|
|
|
rcChasNewMulticastResourceReservation OBJECT-TYPE
|
|
SYNTAX Integer32 (64..4083)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to reserve MGIDs for IP Multicast.
|
|
The change will take effect upon reboot."
|
|
DEFVAL { 2048 }
|
|
::= { rcChassis 44 }
|
|
|
|
rcChasMulticastResourceReservation OBJECT-TYPE
|
|
SYNTAX Integer32 (64..4083)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MGIDs the switch currently has reserved for IP
|
|
Multicast; will remain the same until the next
|
|
reboot."
|
|
::= { rcChassis 45 }
|
|
|
|
rcChasNewMaxVlanResourceReservation OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A mode where all MGIDs are reserved for VLAN use
|
|
only; no IPMC. The change will take effect upon
|
|
reboot."
|
|
DEFVAL { disable }
|
|
::= { rcChassis 46 }
|
|
|
|
rcChasMaxVlanResourceReservation OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Tells if all MGIDs are reserved for VLAN use. Will
|
|
remain the same until the next reboot."
|
|
::= { rcChassis 47 }
|
|
|
|
rcChasMgidUsageVlanCurrent OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4084)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of MGIDs currently used for VLAN, including
|
|
SMLT"
|
|
::= { rcChassis 48 }
|
|
|
|
rcChasMgidUsageVlanRemaining OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4084)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of MGIDs remaining allocated for VLAN"
|
|
::= { rcChassis 49 }
|
|
|
|
rcChasMgidUsageMulticastCurrent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4083)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of MGIDs currently used for IPMC"
|
|
::= { rcChassis 50 }
|
|
|
|
rcChasMgidUsageMulticastRemaining OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4083)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of MGIDs remaining allocated for IPMC"
|
|
::= { rcChassis 51 }
|
|
|
|
rcChasPowerManagementEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Turn on or off Chassis Power Management. The
|
|
configuration will take effect upon reboot.
|
|
This object is not applicable to VSP"
|
|
DEFVAL { true }
|
|
::= { rcChassis 52 }
|
|
|
|
rcChasForceTopologyIpFlagEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable flag which is used to set the CLIP-ip as topology ip"
|
|
DEFVAL { false }
|
|
::= { rcChassis 53 }
|
|
|
|
-- This Parameter is defined for Network Topology.
|
|
-- ER:Q01654904.
|
|
|
|
rcChasCircuitlessIpId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..256)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Clip-Id set by the user to be used as Topology-ip.
|
|
0' means no circuitless IP id while '1..256' is valid
|
|
circuitless Id"
|
|
::= { rcChassis 54 }
|
|
|
|
rcChasPowerManagementOriginalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "On or off value of Chassis Power Management which the
|
|
switch has currently booted. It will remain the same
|
|
until the next reboot."
|
|
DEFVAL { true }
|
|
::= { rcChassis 55 }
|
|
|
|
rcChasPowerManagementFanCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Turn on or off the Fan Check functionility of Chassis
|
|
Power Management. The value takes effect only on reboot."
|
|
DEFVAL { true }
|
|
::= { rcChassis 56 }
|
|
|
|
rcChasPowerManagementFanCheckOriginalState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The on or off value of fan check which the switch has
|
|
booted with. The value does not take effect till the next
|
|
reboot."
|
|
DEFVAL { true }
|
|
::= { rcChassis 57 }
|
|
|
|
rcChasEsmHashIndex OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is for enabling/disabling hashing on the upper 24 bits of the UNI for ESM card"
|
|
DEFVAL { false }
|
|
::= { rcChassis 58 }
|
|
|
|
rcChasSwitchFabricRedundancy OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Turn on or off 2:1 Redundancy for 8011co Chassis"
|
|
DEFVAL { enable }
|
|
::= { rcChassis 59 }
|
|
|
|
rcChasSystemDefault OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to default the system"
|
|
DEFVAL { false }
|
|
::= { rcChassis 60 }
|
|
|
|
rcChasTakeIOCardOfflineEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable IO Card to go offline when
|
|
F2E sees excessive resets."
|
|
DEFVAL { true }
|
|
::= { rcChassis 61 }
|
|
|
|
rcChasAutoResetFabricEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable fabric to be reset automatically
|
|
on fab mem full error."
|
|
DEFVAL { false }
|
|
::= { rcChassis 62 }
|
|
|
|
rcChasSecurityConsoleFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable flag which is used for
|
|
Security Console.When it is enabled, the console
|
|
connection works only with the null modem cable"
|
|
DEFVAL { true }
|
|
::= { rcChassis 63 }
|
|
|
|
rcChasRcBridgeFdbOldQueryFlagEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable rcBridgeNewFdbTable for
|
|
fdb query "
|
|
DEFVAL { false }
|
|
::= { rcChassis 64 }
|
|
|
|
rcChasLed OBJECT IDENTIFIER ::= { rcChassis 65 }
|
|
|
|
rcChasLedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcChasLedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains information about LEDs of the chassis"
|
|
::= { rcChasLed 1 }
|
|
|
|
rcChasLedEntry OBJECT-TYPE
|
|
SYNTAX RcChasLedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding a LED Unit"
|
|
INDEX { rcChasLedId }
|
|
::= { rcChasLedTable 1 }
|
|
|
|
RcChasLedEntry ::=
|
|
SEQUENCE {
|
|
rcChasLedId Integer32,
|
|
rcChasLedLabel DisplayString,
|
|
rcChasLedStatus INTEGER
|
|
}
|
|
|
|
rcChasLedId OBJECT-TYPE
|
|
SYNTAX Integer32(1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The chassis LED Id."
|
|
::= { rcChasLedEntry 1 }
|
|
|
|
rcChasLedLabel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The LED's label name."
|
|
::= { rcChasLedEntry 2 }
|
|
|
|
rcChasLedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
greenSteady(2),
|
|
greenBlinking(3),
|
|
amberSteady(4),
|
|
amberBlinking(5),
|
|
off(6),
|
|
redSteady(7),
|
|
redBlinking(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Type of the Led:
|
|
- unknown(1) - type can not be determined.
|
|
- greenSteady(2),
|
|
- greenBlinking(3),
|
|
- amberSteady(4),
|
|
- amberBlinking(5),
|
|
- off(6),
|
|
- redSteady(7),
|
|
- redBlinking(8)
|
|
For different LED, the meaning of each status is different."
|
|
::= { rcChasLedEntry 3 }
|
|
|
|
rcChasPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Device part number or PEC code "
|
|
::= { rcChassis 66 }
|
|
|
|
rcChasModelName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Chassis model name. For APLS platform, it is model name
|
|
which is in teh seeprom"
|
|
::= { rcChassis 67 }
|
|
|
|
rcChasBrandName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Chassis brand name. For APLS platform, it is programmed
|
|
in the seeprom"
|
|
::= { rcChassis 68 }
|
|
|
|
-- Agent Table
|
|
|
|
rcAgentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcAgentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Agents in a chassis table"
|
|
::= { rcChassis 16 }
|
|
|
|
rcAgentEntry OBJECT-TYPE
|
|
SYNTAX RcAgentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular agent"
|
|
INDEX { rcAgentId }
|
|
::= { rcAgentTable 1 }
|
|
|
|
RcAgentEntry ::= SEQUENCE {
|
|
rcAgentId Integer32,
|
|
rcAgentSlot Integer32,
|
|
rcAgentIpAddr IpAddress
|
|
}
|
|
|
|
rcAgentId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "entry id"
|
|
::= { rcAgentEntry 1 }
|
|
|
|
rcAgentSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot agent is in."
|
|
::= { rcAgentEntry 2 }
|
|
|
|
rcAgentIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "agent's ip address."
|
|
::= { rcAgentEntry 3 }
|
|
|
|
|
|
-- Mirror Group
|
|
|
|
rcMirrorSaveConfig OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Control whether Mirror configuration information
|
|
should be saved to NVRAM so mirror settings can
|
|
be automatically reinstalled after a system
|
|
reboot.
|
|
|
|
Setting rcMirrorSaveConfig to true does not
|
|
immediately save the configuration information.
|
|
The save happens when the rcSysAction variable
|
|
is set to 'saveToNVRAM(4)'."
|
|
::= { rcMirror 1 }
|
|
|
|
rcMirrorByPort OBJECT IDENTIFIER ::= { rcMirror 2 }
|
|
|
|
rcMirrorByPortEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether the mirror by port
|
|
feature is active. The system can only support
|
|
mirroring on two ports. When this feature is
|
|
active, all packets received on the port(s)
|
|
specified by rcMirrorSrcPortOne and/or
|
|
rcMirrorSrcPortTwo are copied to rcMirrorDstPort.
|
|
The mirroring operation is non-intrusive."
|
|
DEFVAL { false }
|
|
::= { rcMirrorByPort 1 }
|
|
|
|
rcMirrorByPortMirrorPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The ifIndex of the port to forward mirrored frames to."
|
|
::= { rcMirrorByPort 2 }
|
|
|
|
rcMirrorByPortEnableMirroredPortOne OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether the port specified in
|
|
rcMirrorByPortMirroredPortOne should be mirrored."
|
|
DEFVAL { false }
|
|
::= { rcMirrorByPort 3 }
|
|
|
|
rcMirrorByPortMirroredPortOne OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The ifIndex of the port to be mirrored. That
|
|
is, traffic received on this port will be sent
|
|
to the mirror port."
|
|
::= { rcMirrorByPort 4 }
|
|
|
|
rcMirrorByPortEnableMirroredPortTwo OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether the port specified in
|
|
rcMirrorByPortMirroredPortTwo should be mirrored."
|
|
DEFVAL { false }
|
|
::= { rcMirrorByPort 5 }
|
|
|
|
rcMirrorByPortMirroredPortTwo OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The ifIndex of the port to be mirrored. That
|
|
is, traffic received on this port will be sent
|
|
to the mirror port."
|
|
::= { rcMirrorByPort 6 }
|
|
|
|
-- Dip-Switch Group
|
|
|
|
rcIsolateUnconfigPorts OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether ports that are unconfigured
|
|
should be assigned to the 'isolated' VLAN. Ports
|
|
assigned to the 'isolated' VLAN can only communicate
|
|
with the CP port. If this option is not specified,
|
|
unconfigured ports will be assigned to the 'default'
|
|
VLAN"
|
|
::= { rcDipSwitch 1 }
|
|
|
|
rcUseFactorySettings OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether the system should ignore
|
|
the configuration information stored in NVRAM when
|
|
the system is booted."
|
|
::= { rcDipSwitch 2 }
|
|
|
|
rcHighPriorityMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether the system is configured
|
|
to operate in a high priority mode. The switch can
|
|
operate in either a 'best effort' or 'high priority'
|
|
mode. In the 'best effort' setting, the maximum
|
|
queue thresholds for the QUIDs are set to 768/768
|
|
buffers. In the 'high priority' mode the setting
|
|
is 512/768. This means that in 'high priority' mode
|
|
the normal priority queue can't have more than 512
|
|
buffers, while the high priority queue can have up
|
|
to 768."
|
|
::= { rcDipSwitch 3 }
|
|
|
|
|
|
-- Table Size Group
|
|
|
|
rcTblRmonStatSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current size of the RMON
|
|
Statistic table."
|
|
::= { rcTblSize 1 }
|
|
|
|
rcTblRmonHistoryControlSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current size of the RMON
|
|
History Control table."
|
|
::= { rcTblSize 2 }
|
|
|
|
rcTblRmonHistoryEnetSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current size of the RMON
|
|
History Ethernet table."
|
|
::= { rcTblSize 3 }
|
|
|
|
rcTblRmonAlarmSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current size of the RMON
|
|
Alarm table."
|
|
::= { rcTblSize 4 }
|
|
|
|
rcTblRmonEventSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current size of the RMON
|
|
Event table."
|
|
::= { rcTblSize 5 }
|
|
|
|
rcTblRmonLogSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current size of the RMON
|
|
Log table."
|
|
::= { rcTblSize 6 }
|
|
|
|
rcTblArTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the size of the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 7 }
|
|
|
|
|
|
rcTblArFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of free
|
|
entries that are available in the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 8 }
|
|
|
|
rcTblArNoSpace OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries that could
|
|
not be added to the Address Translation (AR) table
|
|
due to lack of space."
|
|
::= { rcTblSize 9 }
|
|
|
|
rcTblArAdded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries added to
|
|
the Address Translation (AR) table."
|
|
::= { rcTblSize 10 }
|
|
|
|
rcTblArDeleted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries deleted to
|
|
the Address Translation (AR) table."
|
|
::= { rcTblSize 11 }
|
|
|
|
rcTblArMacAdded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of MAC entries added to
|
|
the Address Translation (AR) table."
|
|
::= { rcTblSize 12 }
|
|
|
|
rcTblArMacDeleted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of MAC entries deleted to
|
|
the Address Translation (AR) table."
|
|
::= { rcTblSize 13 }
|
|
|
|
rcTblArMacMoved OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of MAC entries moved in
|
|
the Address Translation (AR) table."
|
|
::= { rcTblSize 14 }
|
|
|
|
rcTblArIpAdded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of IP entries added to
|
|
the Address Translation (AR) table."
|
|
::= { rcTblSize 15 }
|
|
|
|
rcTblArIpDeleted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of IP entries deleted to
|
|
the Address Translation (AR) table."
|
|
::= { rcTblSize 16 }
|
|
|
|
rcTblArMcastTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the size of the Multicast
|
|
Address Translation (AR) table."
|
|
::= { rcTblSize 17 }
|
|
|
|
|
|
rcTblArFreeMcastGroups OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of free multicast
|
|
groups availabe in the Address Translation (AR)
|
|
table."
|
|
::= { rcTblSize 18 }
|
|
|
|
rcTblArIpMcastAdded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Ip multicast
|
|
entries that are added to the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 19 }
|
|
|
|
rcTblArIpMcastDeleted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Ip multicast
|
|
entries that are deleted from the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 20 }
|
|
|
|
rcTblArVlanByPortAdded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of VLAN by port
|
|
entries that are added to the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 21 }
|
|
|
|
rcTblArVlanByPortDeleted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of VLAN by port
|
|
entries that are deleted from the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 22 }
|
|
|
|
rcTblArVlanByProtocolAdded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Vlans by
|
|
Protocol Type entries that are added to
|
|
the Address Translation (AR) table."
|
|
::= { rcTblSize 23 }
|
|
|
|
rcTblArVlanByProtocolDeleted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Vlans by
|
|
Protocol Type entries that are deleted from
|
|
the Address Translation (AR) table."
|
|
::= { rcTblSize 24 }
|
|
|
|
rcTblArVlanByIpSubnetAdded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of VLAN by Ip
|
|
entries that are added to the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 25 }
|
|
|
|
rcTblArVlanByIpSubnetDeleted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of VLAN by Ip
|
|
entries that are deleted from the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 26 }
|
|
|
|
rcTblArIpSubnetsAdded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Ip subnet
|
|
entries that are added to the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 27 }
|
|
|
|
rcTblArIpSubnetsDeleted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Ip subnet
|
|
entries that are deleted from the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 28 }
|
|
|
|
rcTblArRsvpsAdded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of RSVP
|
|
entries that are added to the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 29 }
|
|
|
|
rcTblArRsvpsDeleted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of RSVP
|
|
entries that are deleted from the Address
|
|
Translation (AR) table."
|
|
::= { rcTblSize 30 }
|
|
|
|
|
|
rcTblBrdgFdbSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
dot1d forwarding database table."
|
|
::= { rcTblSize 31 }
|
|
|
|
rcTblBrdgStaticSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
dot1d Static Address Filtering table."
|
|
::= { rcTblSize 32 }
|
|
|
|
rcTblIpAddrSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
IP Address table."
|
|
::= { rcTblSize 33 }
|
|
|
|
rcTblIpForwardingSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
IP Forwarding/Best Route table."
|
|
::= { rcTblSize 34 }
|
|
|
|
rcTblIpNetToMediaSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
IP Net-to-media table."
|
|
::= { rcTblSize 35 }
|
|
|
|
rcTblIpBestPlusAltRouteSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcTblSize 36 }
|
|
|
|
rcTblIpBestPathSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcTblSize 37 }
|
|
|
|
rcTblIpBestPlusAltPathSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcTblSize 38 }
|
|
|
|
|
|
-- IP Group
|
|
|
|
rcIpConf OBJECT IDENTIFIER ::= { rcIp 1 }
|
|
|
|
-- IP Configuration Table
|
|
|
|
rcIpConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain IP routing information
|
|
for a particular interface."
|
|
::= { rcIpConf 1 }
|
|
|
|
rcIpConfEntry OBJECT-TYPE
|
|
SYNTAX RcIpConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing IP routing information. An entry
|
|
is automatically created in this table when routing
|
|
is enabled for an interface -or- when an ip address
|
|
is configured on an interface."
|
|
INDEX { rcIpConfIfIndex }
|
|
::= { rcIpConfTable 1 }
|
|
|
|
RcIpConfEntry ::= SEQUENCE {
|
|
rcIpConfIfIndex InterfaceIndexOrZero,
|
|
rcIpConfAdvertDefRte TruthValue,
|
|
rcIpConfAcceptDefRte TruthValue,
|
|
rcIpConfRowStatus RowStatus,
|
|
rcIpConfRipEnable TruthValue,
|
|
rcIpConfOspfEnable TruthValue,
|
|
rcIpConfIgmpEnable TruthValue,
|
|
rcIpConfAddrAssigned TruthValue,
|
|
rcIpConfDhcpEnable TruthValue,
|
|
rcIpConfTriggeredUpdateEnable TruthValue,
|
|
rcIpConfAutoAggrerateEnable TruthValue,
|
|
rcIpConfGenerateDefaultRoute TruthValue,
|
|
rcIpConfAdvertiseWhenDown TruthValue,
|
|
rcIpConfDirectBroadcastEnable TruthValue,
|
|
rcIpConfRipInPolicy DisplayString,
|
|
rcIpConfRipOutPolicy DisplayString,
|
|
rcIpConfOspfIfType INTEGER,
|
|
rcIpConfRipCost INTEGER,
|
|
rcIpConfRipHolddown INTEGER,
|
|
rcIpConfRipTimeout INTEGER,
|
|
rcIpConfRsmltEnable TruthValue,
|
|
rcIpConfReversePathCheckEnable TruthValue,
|
|
rcIpConfReversePathCheckMode INTEGER,
|
|
rcIpConfIsisEnable TruthValue,
|
|
rcIpConfBfdEnable TruthValue,
|
|
rcIpConfIpVpnLiteEnable TruthValue,
|
|
rcIpConfSpbMulticastEnable TruthValue,
|
|
rcIpConfSpbMulticastQuerierAddr IpAddress,
|
|
rcIpConfVrrpVersion INTEGER,
|
|
rcIpConfVrrpChkSumComputation INTEGER,
|
|
rcIpConfPimGatewayEnable TruthValue,
|
|
rcIpConfIpsecEnable TruthValue
|
|
}
|
|
|
|
rcIpConfIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero (0..6142)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical interface
|
|
or a logical interface (VLAN)."
|
|
::= { rcIpConfEntry 1 }
|
|
|
|
rcIpConfAdvertDefRte OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
advertize a RIP default route."
|
|
::= { rcIpConfEntry 2 }
|
|
|
|
rcIpConfAcceptDefRte OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
accept a RIP default route."
|
|
::= { rcIpConfEntry 3 }
|
|
|
|
rcIpConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status for this entry."
|
|
::= { rcIpConfEntry 4 }
|
|
|
|
rcIpConfRipEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable RIP routing on the specified
|
|
interface."
|
|
::= { rcIpConfEntry 5 }
|
|
|
|
rcIpConfOspfEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable OSPF routing on the specified
|
|
interface."
|
|
::= { rcIpConfEntry 6 }
|
|
|
|
rcIpConfIgmpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable IGMP on the specified
|
|
interface."
|
|
::= { rcIpConfEntry 7 }
|
|
|
|
rcIpConfAddrAssigned OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether IpAddress has been assigned
|
|
for this interface."
|
|
::= { rcIpConfEntry 8 }
|
|
|
|
rcIpConfDhcpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable DHCP on the specified
|
|
interface."
|
|
::= { rcIpConfEntry 9 }
|
|
|
|
rcIpConfTriggeredUpdateEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether the RIP triggered update
|
|
feature should be enabled on this interface."
|
|
::= { rcIpConfEntry 10 }
|
|
|
|
rcIpConfAutoAggrerateEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether the auto aggregation
|
|
feature should be enabled on this interface."
|
|
::= { rcIpConfEntry 11 }
|
|
|
|
rcIpConfGenerateDefaultRoute OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether to generate a default
|
|
RIP route on this interface."
|
|
::= { rcIpConfEntry 12 }
|
|
|
|
rcIpConfAdvertiseWhenDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value is used indicated whether vlan state change
|
|
should be notified to layer 3 or not, provided the vlan
|
|
is configured as routable interface. Also used for
|
|
single routable ports, in that case the criteria for
|
|
state is PortOperStatus.
|
|
Vlan is considered as UP if atleast one member of the
|
|
port based vlan has link up, or atleast one port member
|
|
of the policy based has an entry in the MGID or atleast
|
|
one static member of the policy based vlan has link up.
|
|
Otherwise, vlan is considered as DOWN.
|
|
If the value is 'true' then the interface state change
|
|
will not be notified to layer 3. (i.e., it always stays
|
|
up). If the value is 'false' then the vlan state change
|
|
will be notified to layer 3 so that IP related status
|
|
reflects routable interface state."
|
|
DEFVAL { false }
|
|
::= { rcIpConfEntry 13 }
|
|
|
|
rcIpConfDirectBroadcastEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
forward direct broadcast traffic"
|
|
DEFVAL { false }
|
|
::= { rcIpConfEntry 14 }
|
|
|
|
rcIpConfRipInPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
advertize a RIP default route."
|
|
::= { rcIpConfEntry 15 }
|
|
|
|
rcIpConfRipOutPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
accept a RIP default route."
|
|
::= { rcIpConfEntry 16 }
|
|
|
|
rcIpConfOspfIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast (1),
|
|
nbma (2),
|
|
pointToPoint (3),
|
|
pointToMultipoint (5),
|
|
passive (99)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "OSPF Interface Type."
|
|
::= { rcIpConfEntry 17 }
|
|
|
|
rcIpConfRipCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the rip cost for this interface."
|
|
DEFVAL { 1 }
|
|
::= { rcIpConfEntry 18 }
|
|
|
|
rcIpConfRipHolddown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..360)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the rip holddown timer for this
|
|
interface"
|
|
::= { rcIpConfEntry 19 }
|
|
|
|
rcIpConfRipTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (15..259200)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the rip timeout interval for this
|
|
interface"
|
|
::= { rcIpConfEntry 20 }
|
|
|
|
rcIpConfRsmltEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable Route Smlt feature."
|
|
DEFVAL { false }
|
|
::= { rcIpConfEntry 21 }
|
|
|
|
rcIpConfReversePathCheckEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
perform Reverse Path Check"
|
|
DEFVAL { false }
|
|
::= { rcIpConfEntry 22 }
|
|
|
|
rcIpConfReversePathCheckMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
exist-only (1),
|
|
strict (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Reverse Path Checking mode."
|
|
DEFVAL { exist-only }
|
|
::= { rcIpConfEntry 23 }
|
|
|
|
rcIpConfIsisEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable ISIS protocol for this IP entry"
|
|
::= { rcIpConfEntry 24 }
|
|
|
|
rcIpConfBfdEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable BFD on the specified
|
|
interface."
|
|
DEFVAL { false }
|
|
::= { rcIpConfEntry 25}
|
|
|
|
rcIpConfIpVpnLiteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable ipvpn-lite capability on the specified
|
|
circuitless ip interface."
|
|
::= { rcIpConfEntry 26 }
|
|
|
|
rcIpConfSpbMulticastEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable spb-multicast on this port"
|
|
DEFVAL { false }
|
|
::= { rcIpConfEntry 27 }
|
|
|
|
rcIpConfSpbMulticastQuerierAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "querier-addr for spb-multicast"
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcIpConfEntry 28 }
|
|
|
|
rcIpConfVrrpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unspecified(1),
|
|
v2(2),
|
|
v3(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Set the VRRP version for IPv4 on the specified
|
|
interface. It does not impact the use of IPv6 VRRPv3"
|
|
::= { rcIpConfEntry 29 }
|
|
|
|
rcIpConfPimGatewayEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable PIM Gateway on this port"
|
|
DEFVAL { false }
|
|
::= { rcIpConfEntry 30 }
|
|
|
|
rcIpConfVrrpChkSumComputation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
withPseudoHeader(1),
|
|
withoutPseudoHeader(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Set the IPv4 VRRPv3 checksum computation method on the specified
|
|
interface."
|
|
::= { rcIpConfEntry 31 }
|
|
|
|
rcIpConfIpsecEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable ipsec feature."
|
|
DEFVAL { false }
|
|
::= { rcIpConfEntry 32 }
|
|
|
|
-- Ospf Configuration Table
|
|
|
|
rcIpConfOspfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfOspfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain OSPF information
|
|
for a particular interface."
|
|
::= { rcIpConf 2 }
|
|
|
|
rcIpConfOspfEntry OBJECT-TYPE
|
|
SYNTAX RcIpConfOspfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing OSPF information. An entry is
|
|
automatically created in this table when routing
|
|
is enabled for an interface -or- when an ip address
|
|
is configured on an interface."
|
|
INDEX { rcIpConfOspfIfIndex }
|
|
::= { rcIpConfOspfTable 1 }
|
|
|
|
RcIpConfOspfEntry ::= SEQUENCE {
|
|
rcIpConfOspfIfIndex InterfaceIndexOrZero,
|
|
rcIpConfOspfRtrPriority INTEGER,
|
|
rcIpConfOspfMetric INTEGER,
|
|
rcIpConfOspfAuthKey DisplayString,
|
|
rcIpConfOspfRowStatus RowStatus,
|
|
rcIpConfOspfHelloInterval INTEGER,
|
|
rcIpConfOspfRtrDeadInterval INTEGER,
|
|
rcIpConfOspfIfAreaId IpAddress,
|
|
rcIpConfOspfAuthType INTEGER,
|
|
rcIpConfOspfPollInterval INTEGER,
|
|
rcIpConfOspfIfMtuIgnore INTEGER,
|
|
rcIpConfOspfBfdEnable EnableValue
|
|
}
|
|
|
|
rcIpConfOspfIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero (0..6142)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical interface
|
|
or a logical interface (VLAN)."
|
|
::= { rcIpConfOspfEntry 1 }
|
|
|
|
rcIpConfOspfRtrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'FF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The priority of this interface. Used in multi-
|
|
access networks, this field is used in the
|
|
designated router election algorithm. The value 0
|
|
signifies that the router is not eligible to become
|
|
the designated router on this particular network.
|
|
In the event of a tie in this value, routers will
|
|
use their router id as a tie breaker."
|
|
DEFVAL { 1 }
|
|
::= { rcIpConfOspfEntry 2 }
|
|
|
|
rcIpConfOspfMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The metric for this type of service (TOS) on this
|
|
interface. The default value of the TOS 0 Metric
|
|
is (10^9 / ifSpeed). The value FFFF means 'no route
|
|
via this TOS'. A value of 0 means the interface speed
|
|
(rcIpConfOspfDefaultMetric) will be used as metric
|
|
value, when the state of the interface is up."
|
|
DEFVAL { 0 }
|
|
::= { rcIpConfOspfEntry 3 }
|
|
|
|
rcIpConfOspfAuthKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Authentication Key. If the Area's
|
|
Authorization Type is simplePassword, and the key
|
|
length is shorter than 8 octets, the agent will
|
|
left adjust and zero fill to 8 octets.
|
|
|
|
Note that unauthenticated interfaces need no
|
|
authentication key, and simple password authen-
|
|
tication cannot use a key of more than 8 oc-
|
|
tets. Larger keys are useful only with authen-
|
|
tication mechanisms not specified in this docu-
|
|
ment.
|
|
|
|
When read, ospfIfAuthKey always returns an Octet
|
|
String of length zero."
|
|
REFERENCE "OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
::= { rcIpConfOspfEntry 4 }
|
|
|
|
rcIpConfOspfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status for this entry."
|
|
::= { rcIpConfOspfEntry 5 }
|
|
|
|
rcIpConfOspfHelloInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The length of time, in seconds, between the
|
|
Hello packets that the router sends on the
|
|
interface. This value must be the same for all
|
|
routers attached to a common network."
|
|
DEFVAL { 10 }
|
|
::= { rcIpConfOspfEntry 6 }
|
|
|
|
rcIpConfOspfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'7FFFFFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds that a router's Hello
|
|
packets have not been seen before it's
|
|
neighbors declare the router down. This should
|
|
be some multiple of the Hello interval. This
|
|
value must be the same for all routers attached
|
|
to a common network."
|
|
DEFVAL { 40 }
|
|
::= { rcIpConfOspfEntry 7 }
|
|
|
|
rcIpConfOspfIfAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A 32-bit integer uniquely identifying the area to
|
|
which the interface connects. Area ID 0.0.0.0 is used
|
|
for the OSPF backbone."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcIpConfOspfEntry 8 }
|
|
|
|
rcIpConfOspfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
simplePassword (1),
|
|
md5 (2),
|
|
sha1 (3),
|
|
sha2 (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The authentication type specified for an interface.
|
|
Additional authentication types may be assigned locally."
|
|
REFERENCE "OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { rcIpConfOspfEntry 9 }
|
|
|
|
rcIpConfOspfPollInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "OSPF NBMA Interface Poll Interval."
|
|
::= { rcIpConfOspfEntry 10 }
|
|
|
|
rcIpConfOspfIfMtuIgnore OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mtu-ignore flag is for ignoring the mtu checking in
|
|
ospf bdb"
|
|
DEFVAL { disable }
|
|
::= { rcIpConfOspfEntry 11 }
|
|
|
|
rcIpConfOspfBfdEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable BFD for OSPF."
|
|
DEFVAL { disable }
|
|
::= { rcIpConfOspfEntry 12}
|
|
|
|
-- Ospf Cost Grp
|
|
|
|
rcIpConfOspfDefaultMetric OBJECT IDENTIFIER ::= { rcIpConf 3 }
|
|
|
|
rcIpConfOspfDefaultMetric10MegPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
10Meg Interface(Port)."
|
|
DEFVAL { 100 }
|
|
::= { rcIpConfOspfDefaultMetric 1 }
|
|
|
|
rcIpConfOspfDefaultMetric100MegPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
100Meg Interface(Port)."
|
|
DEFVAL { 10 }
|
|
::= { rcIpConfOspfDefaultMetric 2 }
|
|
|
|
rcIpConfOspfDefaultMetric1000MegPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
1000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcIpConfOspfDefaultMetric 3 }
|
|
|
|
rcIpConfOspfDefaultMetric10000MegPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
10000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcIpConfOspfDefaultMetric 4 }
|
|
|
|
rcIpConfOspfDefaultMetric40000MegPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
40000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcIpConfOspfDefaultMetric 5 }
|
|
|
|
rcIpConfOspfDefaultMetricVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
Vlan Interface"
|
|
DEFVAL { 10 }
|
|
::= { rcIpConfOspfDefaultMetric 6 }
|
|
|
|
rcIpConfOspfDefaultMetric100000MegPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
100000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcIpConfOspfDefaultMetric 7 }
|
|
|
|
rcIpConfOspfDefaultMetric25000MegPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
25000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcIpConfOspfDefaultMetric 8 }
|
|
|
|
rcIpConfOspf OBJECT IDENTIFIER ::= { rcIpConf 4 }
|
|
|
|
|
|
rcIpConfOspfTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether Ospf Traps should be sent."
|
|
::= { rcIpConfOspf 1 }
|
|
|
|
rcIpConfOspfAutoVirtLinkEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether auto virtual link
|
|
creation is enabled or not. If set to true
|
|
OSPF will create virtual links between
|
|
ABRs whether it is needed or not, but adjacency
|
|
will established only when one of the ABR
|
|
losses connection to backbone area. If set to
|
|
false then it is user resposibity to create
|
|
virtual link whenever needed."
|
|
DEFVAL { false }
|
|
::= { rcIpConfOspf 2 }
|
|
|
|
rcIpConfOspfSpfHoldDownTime OBJECT-TYPE
|
|
SYNTAX INTEGER (3..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SPF Hold Down Timer value. The SPF will run
|
|
at most once per hold down timer value."
|
|
DEFVAL { 10 }
|
|
::= { rcIpConfOspf 3 }
|
|
|
|
rcIpConfOspfAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
runSpf(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpConfOspf 4 }
|
|
|
|
rcIpConfOspfRfc1583Compatibility OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Controls the preference rules used when choosing
|
|
among multiple AS-External-LSAs advertising the
|
|
same destination. When this is enabled, the
|
|
preference rule will be same as specified by
|
|
RFC1583. When disabled, the new preference rule
|
|
as described in RFC2328 will be applicable, which
|
|
potentially prevents the routing loops when
|
|
AS-External-LSAs for the same destination have
|
|
been originated from different areas."
|
|
DEFVAL { false }
|
|
::= { rcIpConfOspf 5 }
|
|
|
|
rcIpConfOspfHelperModeDisable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Disables Graceful Restart Helper Mode feature.
|
|
The feature is enabled by default (so this flag
|
|
is disabled by default)."
|
|
DEFVAL { false }
|
|
::= { rcIpConfOspf 6 }
|
|
|
|
rcIpConfGlobal OBJECT IDENTIFIER ::= { rcIpConf 6 }
|
|
|
|
rcIpConfGlobalRipHoldDownTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..360)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set the system-wide RIP hold down time
|
|
in seconds."
|
|
DEFVAL { 120 }
|
|
::= { rcIpConfGlobal 1 }
|
|
|
|
rcIpConfGlobalIcmpNetUnreach OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set the icmp net unreach feature
|
|
enable/disable."
|
|
DEFVAL { false }
|
|
::= { rcIpConfGlobal 2 }
|
|
|
|
rcIpConfGlobalEcmpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set the ecmp enable/disable."
|
|
DEFVAL { false }
|
|
::= { rcIpConfGlobal 3 }
|
|
|
|
rcIpConfGlobalEcmpMaxPath OBJECT-TYPE
|
|
SYNTAX INTEGER(1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally configure maximum ECMP paths number."
|
|
DEFVAL { 1 }
|
|
::= { rcIpConfGlobal 4 }
|
|
|
|
rcIpConfGlobalAlternativeEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally configure alternative enable."
|
|
DEFVAL { true }
|
|
::= { rcIpConfGlobal 5 }
|
|
|
|
rcIpConfGlobalRouteDiscoveryEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable ICMP Route Discovery feature"
|
|
DEFVAL { true }
|
|
::= { rcIpConfGlobal 6 }
|
|
|
|
rcIpConfGlobalRipTimeOutInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (15..259200)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Rip TimeOut Interval in seconds"
|
|
DEFVAL { 180 }
|
|
::= { rcIpConfGlobal 8 }
|
|
|
|
rcIpConfGlobalRipDefImportMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Rip def import metric"
|
|
DEFVAL { 8 }
|
|
::= { rcIpConfGlobal 9 }
|
|
|
|
rcIpConfGlobalEcmp1PathList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routes to networks specified in this prefix-list
|
|
can have upto 1 ECMP path, irrespective of
|
|
ecmp-max-path configuration"
|
|
::= { rcIpConfGlobal 10 }
|
|
|
|
rcIpConfGlobalEcmp2PathList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routes to networks specified in this prefix-list
|
|
can have upto 2 ECMP path, irrespective of
|
|
ecmp-max-path configuration."
|
|
::= { rcIpConfGlobal 11 }
|
|
|
|
rcIpConfGlobalEcmp3PathList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routes to networks specified in this prefix-list
|
|
can have upto 3 ECMP path, irrespective of
|
|
ecmp-max-path configuration."
|
|
::= { rcIpConfGlobal 12 }
|
|
|
|
rcIpConfGlobalEcmp4PathList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routes to networks specified in this prefix-list
|
|
can have upto 4 ECMP path, irrespective of
|
|
ecmp-max-path configuration."
|
|
::= { rcIpConfGlobal 13 }
|
|
|
|
rcIpConfGlobalEcmpPathListApply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is to apply any changes in ECMP path list
|
|
configuration or in the prefix-lists configured to
|
|
be used as path list"
|
|
::= { rcIpConfGlobal 14 }
|
|
|
|
rcIpConfGlobalIcmpRedirectMsg OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpConfGlobal 15 }
|
|
|
|
rcIpConfGlobalMulticastMacFloodingStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpConfGlobal 16 }
|
|
|
|
rcIpConfGlobalArpThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (50..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Defines the maximum number of outstanding arp request
|
|
a switch can generate."
|
|
DEFVAL { 500 }
|
|
::= { rcIpConfGlobal 17 }
|
|
|
|
rcIpConfGlobalAllowMoreSpecificNonLocalRouteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to determine whether more specific non local routes
|
|
will go into the routing table."
|
|
DEFVAL { false }
|
|
::= { rcIpConfGlobal 18 }
|
|
|
|
rcIpConfGlobalUdpCheckSumEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable UDP checksum calculation"
|
|
DEFVAL { true }
|
|
::= { rcIpConfGlobal 19 }
|
|
|
|
rcIpConfGlobalSuperNetEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally enable Supernetting/ CIDR
|
|
routing for IP"
|
|
DEFVAL { false }
|
|
::= { rcIpConfGlobal 20 }
|
|
|
|
rcIpConfGlobalEcmp5PathList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routes to networks specified in this prefix-list
|
|
can have upto 5 ECMP path, irrespective of
|
|
ecmp-max-path configuration."
|
|
::= { rcIpConfGlobal 21 }
|
|
|
|
rcIpConfGlobalEcmp6PathList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routes to networks specified in this prefix-list
|
|
can have upto 6 ECMP path, irrespective of
|
|
ecmp-max-path configuration."
|
|
::= { rcIpConfGlobal 22 }
|
|
|
|
rcIpConfGlobalEcmp7PathList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routes to networks specified in this prefix-list
|
|
can have upto 7 ECMP path, irrespective of
|
|
ecmp-max-path configuration."
|
|
::= { rcIpConfGlobal 23 }
|
|
|
|
rcIpConfGlobalEcmp8PathList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routes to networks specified in this prefix-list
|
|
can have upto 8 ECMP path, irrespective of
|
|
ecmp-max-path configuration."
|
|
::= { rcIpConfGlobal 24 }
|
|
|
|
rcIpConfGlobalGarpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set the gratuitous-arp enable/disable."
|
|
DEFVAL { true }
|
|
::= { rcIpConfGlobal 25 }
|
|
|
|
rcIpConfGlobalArpMcastMacFlooding OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Ip Arp Multicast Mac Flooding feature."
|
|
DEFVAL { false }
|
|
::= { rcIpConfGlobal 26 }
|
|
|
|
rcIpConfGlobalSourceRouteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally enable/disable ip source routing feature."
|
|
DEFVAL { false }
|
|
::= { rcIpConfGlobal 27 }
|
|
|
|
rcIpConfGlobalIcmpEchoBroadcastRequestEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally enable/disable ip icmp echo broadcast request feature."
|
|
DEFVAL { true }
|
|
::= { rcIpConfGlobal 28 }
|
|
|
|
-- Ospf Area Table
|
|
|
|
rcIpConfOspfAreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain OSPF information
|
|
for a particular Area."
|
|
::= { rcIpConf 7 }
|
|
|
|
rcIpConfOspfAreaEntry OBJECT-TYPE
|
|
SYNTAX RcIpConfOspfAreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing OSPF Area configuration
|
|
information. An entry is automatically created
|
|
in this table when an area is configured through
|
|
ospfAreaTable in (rfc1253rcc.mib)."
|
|
INDEX { rcIpConfOspfAreaId }
|
|
::= { rcIpConfOspfAreaTable 1 }
|
|
|
|
RcIpConfOspfAreaEntry ::= SEQUENCE {
|
|
rcIpConfOspfAreaId IpAddress,
|
|
rcIpConfOspfAreaImportSummary TruthValue,
|
|
rcIpConfOspfAreaActiveIfCount Integer32
|
|
}
|
|
|
|
rcIpConfOspfAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify an area. Area ID
|
|
0.0.0.0 is used for the OSPF backbone."
|
|
::= { rcIpConfOspfAreaEntry 1 }
|
|
|
|
rcIpConfOspfAreaImportSummary OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The area's support for importing Summary
|
|
advertisements into a stub area. This field
|
|
should be used only if ospfImportASExtern is
|
|
set to FALSE"
|
|
DEFVAL { true }
|
|
::= { rcIpConfOspfAreaEntry 2 }
|
|
|
|
rcIpConfOspfAreaActiveIfCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable displays the number of active
|
|
interfaces configured in this area. An area
|
|
cannot be deleted if this value is > 0."
|
|
::= { rcIpConfOspfAreaEntry 3 }
|
|
|
|
|
|
-- IP Configuration IP Interface Table
|
|
|
|
rcIpConfV2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to maintain IP routing information
|
|
for a particular interface."
|
|
::= { rcIpConf 8 }
|
|
|
|
rcIpConfV2Entry OBJECT-TYPE
|
|
SYNTAX RcIpConfV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing IP routing information. An entry
|
|
is automatically created in this table when routing
|
|
is enabled for an interface -or- when an ip address
|
|
is configured on an interface."
|
|
INDEX { rcIpConfV2Index, rcIpConfV2Addr }
|
|
::= { rcIpConfV2Table 1 }
|
|
|
|
RcIpConfV2Entry ::= SEQUENCE {
|
|
rcIpConfV2Index InterfaceIndexOrZero,
|
|
rcIpConfV2Addr IpAddress,
|
|
rcIpConfV2RowStatus RowStatus,
|
|
rcIpConfV2AdvertDefRte TruthValue,
|
|
rcIpConfV2AcceptDefRte TruthValue,
|
|
rcIpConfV2RipEnable TruthValue,
|
|
rcIpConfV2OspfEnable TruthValue,
|
|
rcIpConfV2IgmpEnable TruthValue,
|
|
rcIpConfV2AddrAssigned TruthValue,
|
|
rcIpConfV2TriggeredUpdateEnable TruthValue,
|
|
rcIpConfV2RipAutoAggrerateEnable TruthValue,
|
|
rcIpConfV2RipGenerateDefaultRoute TruthValue,
|
|
rcIpConfV2AdvertiseWhenDown TruthValue
|
|
}
|
|
|
|
rcIpConfV2Index OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero (0..6142)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "An unique value to identify a physical interface
|
|
or a logical interface (VLAN)."
|
|
::= { rcIpConfV2Entry 1 }
|
|
|
|
rcIpConfV2Addr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Ip interface address."
|
|
::= { rcIpConfV2Entry 2 }
|
|
|
|
rcIpConfV2RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status for this entry."
|
|
::= { rcIpConfV2Entry 3 }
|
|
|
|
rcIpConfV2AdvertDefRte OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
advertize a RIP default route."
|
|
::= { rcIpConfV2Entry 4 }
|
|
|
|
rcIpConfV2AcceptDefRte OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
accept a RIP default route."
|
|
::= { rcIpConfV2Entry 5 }
|
|
|
|
rcIpConfV2RipEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable RIP routing on the specified
|
|
interface."
|
|
::= { rcIpConfV2Entry 6 }
|
|
|
|
rcIpConfV2OspfEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable OSPF routing on the specified
|
|
interface."
|
|
::= { rcIpConfV2Entry 7 }
|
|
|
|
rcIpConfV2IgmpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable IGMP on the specified
|
|
interface."
|
|
::= { rcIpConfV2Entry 8 }
|
|
|
|
rcIpConfV2AddrAssigned OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Indicate whether IpAddress has been assigned
|
|
for this interface."
|
|
::= { rcIpConfV2Entry 9 }
|
|
|
|
rcIpConfV2TriggeredUpdateEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether the RIP triggered update
|
|
feature should be enabled on this interface."
|
|
::= { rcIpConfV2Entry 10 }
|
|
|
|
rcIpConfV2RipAutoAggrerateEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether the auto aggregation
|
|
feature should be enabled on this interface."
|
|
::= { rcIpConfV2Entry 11 }
|
|
|
|
rcIpConfV2RipGenerateDefaultRoute OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether to generate a default
|
|
RIP route on this interface."
|
|
::= { rcIpConfV2Entry 12 }
|
|
|
|
rcIpConfV2AdvertiseWhenDown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The value is used indicated whether vlan state change
|
|
should be notified to layer 3 or not, provided the vlan
|
|
is configured as routable interface. Also used for
|
|
single routable ports, in that case the criteria for
|
|
state is PortOperStatus.
|
|
Vlan is considered as UP if atleast one member of the
|
|
port based vlan has link up, or atleast one port member
|
|
of the policy based has an entry in the MGID or atleast
|
|
one static member of the policy based vlan has link up.
|
|
Otherwise, vlan is considered as DOWN.
|
|
If the value is 'true' then the interface state change
|
|
will not be notified to layer 3. (i.e., it always stays
|
|
up). If the value is 'false' then the vlan state change
|
|
will be notified to layer 3 so that IP related status
|
|
reflects routable interface state."
|
|
DEFVAL { false }
|
|
::= { rcIpConfV2Entry 13 }
|
|
|
|
-- Ospf Configuration Ip Interface Table
|
|
|
|
rcIpConfOspfV2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfOspfV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to maintain OSPF information
|
|
for a particular interface."
|
|
::= { rcIpConf 9 }
|
|
|
|
rcIpConfOspfV2Entry OBJECT-TYPE
|
|
SYNTAX RcIpConfOspfV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing OSPF information. An entry is
|
|
automatically created in this table when routing
|
|
is enabled for an interface -or- when an ip address
|
|
is configured on an interface."
|
|
INDEX { rcIpConfOspfV2IfIndex, rcIpConfOspfV2IpAddr }
|
|
::= { rcIpConfOspfV2Table 1 }
|
|
|
|
RcIpConfOspfV2Entry ::= SEQUENCE {
|
|
rcIpConfOspfV2IfIndex InterfaceIndexOrZero,
|
|
rcIpConfOspfV2IpAddr IpAddress,
|
|
rcIpConfOspfV2RtrPriority INTEGER,
|
|
rcIpConfOspfV2Metric INTEGER,
|
|
rcIpConfOspfV2AuthKey DisplayString,
|
|
rcIpConfOspfV2RowStatus RowStatus,
|
|
rcIpConfOspfV2HelloInterval INTEGER,
|
|
rcIpConfOspfV2RtrDeadInterval INTEGER,
|
|
rcIpConfOspfV2IfAreaId IpAddress,
|
|
rcIpConfOspfV2AuthType INTEGER
|
|
}
|
|
|
|
rcIpConfOspfV2IfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero (0..6142)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "An unique value to identify a physical interface
|
|
or a logical interface (VLAN)."
|
|
::= { rcIpConfOspfV2Entry 1 }
|
|
|
|
rcIpConfOspfV2IpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "IpAddress of the IP interface."
|
|
::= { rcIpConfOspfV2Entry 2 }
|
|
|
|
rcIpConfOspfV2RtrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'FF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The priority of this interface. Used in multi-
|
|
access networks, this field is used in the
|
|
designated router election algorithm. The value 0
|
|
signifies that the router is not eligible to become
|
|
the designated router on this particular network.
|
|
In the event of a tie in this value, routers will
|
|
use their router id as a tie breaker."
|
|
DEFVAL { 1 }
|
|
::= { rcIpConfOspfV2Entry 3 }
|
|
|
|
rcIpConfOspfV2Metric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The metric for this type of service (TOS) on this
|
|
interface. The default value of the TOS 0 Metric
|
|
is (10^9 / ifSpeed). The value FFFF means 'no route
|
|
via this TOS'. A value of 0 means the interface speed
|
|
(rcIpConfOspfV2DefaultMetric) will be used as metric
|
|
value, when the state of the interface is up."
|
|
DEFVAL { 0 }
|
|
::= { rcIpConfOspfV2Entry 4 }
|
|
|
|
rcIpConfOspfV2AuthKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(8))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The Authentication Key. If the Area's
|
|
Authorization Type is simplePassword, and the key
|
|
length is shorter than 8 octets, the agent will
|
|
left adjust and zero fill to 8 octets. When read,
|
|
ospfIfAuthKey always returns an Octet String of
|
|
length zero."
|
|
REFERENCE "OSPF Version 2, Section 9 The Interface Data
|
|
Structure"
|
|
::= { rcIpConfOspfV2Entry 5 }
|
|
|
|
rcIpConfOspfV2RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status for this entry."
|
|
::= { rcIpConfOspfV2Entry 6 }
|
|
|
|
rcIpConfOspfV2HelloInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The length of time, in seconds, between the
|
|
Hello packets that the router sends on the
|
|
interface. This value must be the same for all
|
|
routers attached to a common network."
|
|
DEFVAL { 10 }
|
|
::= { rcIpConfOspfV2Entry 7 }
|
|
|
|
rcIpConfOspfV2RtrDeadInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'7FFFFFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of seconds that a router's Hello
|
|
packets have not been seen before it's
|
|
neighbors declare the router down. This should
|
|
be some multiple of the Hello interval. This
|
|
value must be the same for all routers attached
|
|
to a common network."
|
|
DEFVAL { 40 }
|
|
::= { rcIpConfOspfV2Entry 8 }
|
|
|
|
rcIpConfOspfV2IfAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "A 32-bit integer uniquely identifying the area to
|
|
which the interface connects. Area ID 0.0.0.0 is used
|
|
for the OSPF backbone."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcIpConfOspfV2Entry 9 }
|
|
|
|
rcIpConfOspfV2AuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
simplePassword (1),
|
|
md5 (2)
|
|
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The authentication type specified for an interface.
|
|
Additional authentication types may be assigned locally."
|
|
REFERENCE "OSPF Version 2, Appendix E Authentication"
|
|
DEFVAL { 0 } -- no authentication, by default
|
|
::= { rcIpConfOspfV2Entry 10 }
|
|
|
|
|
|
-- Ospf Area Aggregate Table
|
|
|
|
rcIpConfOspfAreaAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfOspfAreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain OSPF summary route
|
|
metric parameter for a particular Area range. "
|
|
::= { rcIpConf 10 }
|
|
|
|
rcIpConfOspfAreaAggregateEntry OBJECT-TYPE
|
|
SYNTAX RcIpConfOspfAreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing OSPF summary route metric
|
|
parameter for a particular Area range.
|
|
An entry is automatically created in this
|
|
table when an area range is configured through
|
|
ospfAreaAggregateTable in rfc1850rcc.mib"
|
|
INDEX { rcIpConfOspfAreaAggregateAreaID,
|
|
rcIpConfOspfAreaAggregateLsdbType,
|
|
rcIpConfOspfAreaAggregateNet,
|
|
rcIpConfOspfAreaAggregateMask }
|
|
::= { rcIpConfOspfAreaAggregateTable 1 }
|
|
|
|
RcIpConfOspfAreaAggregateEntry ::= SEQUENCE {
|
|
rcIpConfOspfAreaAggregateAreaID
|
|
IpAddress,
|
|
rcIpConfOspfAreaAggregateLsdbType
|
|
INTEGER,
|
|
rcIpConfOspfAreaAggregateNet
|
|
IpAddress,
|
|
rcIpConfOspfAreaAggregateMask
|
|
IpAddress,
|
|
rcIpConfOspfAreaAggregateAdvertiseMetric
|
|
INTEGER,
|
|
rcIpConfOspfAreaAggregateEffect
|
|
INTEGER
|
|
}
|
|
|
|
rcIpConfOspfAreaAggregateAreaID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Area the Address Aggregate is to be found
|
|
within."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcIpConfOspfAreaAggregateEntry 1 }
|
|
|
|
|
|
rcIpConfOspfAreaAggregateLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
summaryLink (3),
|
|
nssaExternalLink (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the Address Aggregate. This field
|
|
specifies the Lsdb type that this Address Ag-
|
|
gregate applies to."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { rcIpConfOspfAreaAggregateEntry 2 }
|
|
|
|
|
|
rcIpConfOspfAreaAggregateNet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the Net or Subnet indicated
|
|
by the range."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcIpConfOspfAreaAggregateEntry 3 }
|
|
|
|
rcIpConfOspfAreaAggregateMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Subnet Mask that pertains to the Net or
|
|
Subnet."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcIpConfOspfAreaAggregateEntry 4 }
|
|
|
|
rcIpConfOspfAreaAggregateAdvertiseMetric OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify a metric for a Summary LSA (type
|
|
3) generated by OSPF through an area range.
|
|
If this metric is set to 0, OSPF uses the cost
|
|
to the farthest point in the networks being
|
|
summarized as the metric."
|
|
::= { rcIpConfOspfAreaAggregateEntry 5 }
|
|
|
|
rcIpConfOspfAreaAggregateEffect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
advertiseMatching (1),
|
|
doNotAdvertiseMatching (2),
|
|
advertiseDoNotAggregate (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnets subsumed by ranges either trigger the
|
|
advertisement of the indicated aggregate (ad-
|
|
vertiseMatching), or result in the subnet's not
|
|
being advertised at all outside the area."
|
|
DEFVAL { advertiseMatching }
|
|
::= { rcIpConfOspfAreaAggregateEntry 6 }
|
|
|
|
-- IP Route Smlt Table
|
|
|
|
rcIpConfRsmltTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfRsmltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain OSPF summary route
|
|
metric parameter for a particular Area range. "
|
|
::= { rcIpConf 11 }
|
|
|
|
rcIpConfRsmltEntry OBJECT-TYPE
|
|
SYNTAX RcIpConfRsmltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing OSPF summary route metric
|
|
parameter for a particular Area range.
|
|
An entry is automatically created in this
|
|
table when an area range is configured through
|
|
ospfAreaAggregateTable in rfc1850rcc.mib"
|
|
INDEX { rcIpConfRsmltIfIndex }
|
|
::= { rcIpConfRsmltTable 1 }
|
|
|
|
RcIpConfRsmltEntry ::= SEQUENCE {
|
|
rcIpConfRsmltIfIndex
|
|
InterfaceIndex,
|
|
rcIpConfRsmltHoldDownTimer
|
|
INTEGER,
|
|
rcIpConfRsmltHoldUpTimer
|
|
INTEGER,
|
|
rcIpConfRsmltRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
rcIpConfRsmltIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Interface Index, this is an index of the table."
|
|
::= { rcIpConfRsmltEntry 1 }
|
|
|
|
rcIpConfRsmltHoldDownTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Timer value, the range of value is from 0 to 3600."
|
|
::= { rcIpConfRsmltEntry 2 }
|
|
|
|
rcIpConfRsmltHoldUpTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600 | 9999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means
|
|
infinity."
|
|
::= { rcIpConfRsmltEntry 3 }
|
|
|
|
rcIpConfRsmltRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row Status."
|
|
::= { rcIpConfRsmltEntry 4 }
|
|
|
|
-- IP BFD Table
|
|
|
|
rcIpConfBfdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "BFD configuration table"
|
|
::= { rcIpConf 12 }
|
|
|
|
rcIpConfBfdEntry OBJECT-TYPE
|
|
SYNTAX RcIpConfBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to configure BFD on a particular interface. An
|
|
entry is created automatically when the variable
|
|
rcIpConfBfdEnable is set to TRUE.
|
|
Once created this entry will only be deleted if the
|
|
rcIpConfBfdRowStatus is set to 'destroy(6)'. In which
|
|
case, the rcIpConfBfdEnable is automatically reset to
|
|
the FALSE setting."
|
|
INDEX { rcIpConfBfdIfIndex }
|
|
::= { rcIpConfBfdTable 1 }
|
|
|
|
RcIpConfBfdEntry ::= SEQUENCE {
|
|
rcIpConfBfdIfIndex InterfaceIndex,
|
|
rcIpConfBfdMinRxInterval Integer32,
|
|
rcIpConfBfdTxInterval Integer32,
|
|
rcIpConfBfdMultiplier Integer32,
|
|
rcIpConfBfdRowStatus RowStatus,
|
|
rcIpConfBfdHoldOffInterval Unsigned32,
|
|
rcIpConfBfdStaticFlag EnableValue
|
|
}
|
|
|
|
rcIpConfBfdIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface number. The number can represent either
|
|
a physical or logical(VLAN) interface."
|
|
::= { rcIpConfBfdEntry 1 }
|
|
|
|
rcIpConfBfdMinRxInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (100..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "the min rx interval in milliseconds"
|
|
DEFVAL { 200 }
|
|
::= { rcIpConfBfdEntry 2 }
|
|
|
|
rcIpConfBfdTxInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (100..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "the desired tx interval in milliseconds"
|
|
DEFVAL { 200 }
|
|
::= { rcIpConfBfdEntry 3 }
|
|
|
|
rcIpConfBfdMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "the multiplier BFD wait before rx timeout"
|
|
DEFVAL { 3 }
|
|
::= { rcIpConfBfdEntry 4 }
|
|
|
|
rcIpConfBfdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcIpConfBfdEntry 5 }
|
|
|
|
rcIpConfBfdHoldOffInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the hold off timer interval, in
|
|
seconds. 0 means that hold off timer is disabled."
|
|
DEFVAL { 0 }
|
|
::= { rcIpConfBfdEntry 6 }
|
|
|
|
rcIpConfBfdStaticFlag OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the static-flag for bfd. When disabled,
|
|
the static route will go down, when bfd is disabled"
|
|
DEFVAL { enable }
|
|
::= { rcIpConfBfdEntry 7}
|
|
|
|
-- IP Address Table
|
|
|
|
rcIpAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of addressing information relevant to
|
|
this entity's IP addresses.
|
|
|
|
This table is identical to the ipAddrTable in
|
|
MIB2 except the columns rcIpAdEntIfIndex and
|
|
rcIpAdEntAddr are reversed. Also, the table
|
|
is indexed by both these variables."
|
|
::= { rcIp 2 }
|
|
|
|
rcIpAddrEntry OBJECT-TYPE
|
|
SYNTAX RcIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The addressing information for one of this
|
|
entity's IP addresses."
|
|
INDEX { rcIpAdEntIfIndex, rcIpAdEntAddr }
|
|
::= { rcIpAddrTable 1 }
|
|
|
|
RcIpAddrEntry ::=
|
|
SEQUENCE {
|
|
rcIpAdEntIfIndex InterfaceIndex,
|
|
rcIpAdEntAddr IpAddress,
|
|
rcIpAdEntNetMask IpAddress,
|
|
rcIpAdEntBcastAddrFormat INTEGER,
|
|
rcIpAdEntReasmMaxSize INTEGER,
|
|
rcIpAdEntRowStatus RowStatus,
|
|
rcIpAdEntVlanId INTEGER,
|
|
rcIpAdEntBrouterPort TruthValue,
|
|
rcIpAdEntMacOffset INTEGER,
|
|
rcIpAdEntIfType INTEGER,
|
|
rcIpAdEntSecondaryIf TruthValue,
|
|
rcIpAdEntVrfId VrfIdentifier
|
|
}
|
|
|
|
rcIpAdEntIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
same value of ifIndex."
|
|
::= { rcIpAddrEntry 1 }
|
|
|
|
rcIpAdEntAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address to which this entry's addressing
|
|
information pertains."
|
|
::= { rcIpAddrEntry 2 }
|
|
|
|
rcIpAdEntNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The subnet mask associated with the IP address of
|
|
this entry. The value of the mask is an IP
|
|
address with all the network bits set to 1 and all
|
|
the hosts bits set to 0."
|
|
::= { rcIpAddrEntry 3 }
|
|
|
|
rcIpAdEntBcastAddrFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
zeros(0), -- use zeros
|
|
ones(1) -- use ones
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP broadcast address format used on this
|
|
interface."
|
|
::= { rcIpAddrEntry 4 }
|
|
|
|
rcIpAdEntReasmMaxSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The size of the largest IP datagram which this
|
|
entity can re-assemble from incoming IP fragmented
|
|
datagrams received on this interface."
|
|
::= { rcIpAddrEntry 5 }
|
|
|
|
rcIpAdEntRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcIpAddrEntry 6 }
|
|
|
|
rcIpAdEntVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual LAN
|
|
associated with this entry. This value corresponds
|
|
to the lower 12 bits in the IEEE 802.1Q VLAN Tag."
|
|
::= { rcIpAddrEntry 7 }
|
|
|
|
rcIpAdEntBrouterPort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this entry correponds
|
|
to a brouter port (as oppose to a routable VLAN).
|
|
This value cannot be changed after the row is
|
|
created."
|
|
::= { rcIpAddrEntry 8 }
|
|
|
|
rcIpAdEntMacOffset OBJECT-TYPE
|
|
SYNTAX INTEGER (0..511)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to translate the ip address into mac address.
|
|
The system has 512 mac addresses of which 0-507 are reserved for
|
|
Boardwalk box. 508-511 is reserved for MG. One can either
|
|
mention a mac offset while configuring an ip on the
|
|
vlan or it can be alloted by the system within the above range."
|
|
::= { rcIpAddrEntry 9 }
|
|
|
|
rcIpAdEntIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
circuitLessIP(1),
|
|
brouterPort(2),
|
|
vlan(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address entry IfType indicates the type of the
|
|
interface. In the case of circuit-less-IP there is
|
|
no association with any ports. In other words, it can
|
|
be thought of as a virtual interface. The value
|
|
'brouter port' indicates this interface is associated
|
|
with a specific physical port. The value 'vlan'
|
|
indicates a logical port that contains one or physical
|
|
ports/MLT ports."
|
|
|
|
::= { rcIpAddrEntry 10 }
|
|
|
|
rcIpAdEntSecondaryIf OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this entry correponds
|
|
to a secondary interface (as oppose to a primary interface).
|
|
This value cannot be changed after the row is
|
|
created."
|
|
::= { rcIpAddrEntry 11 }
|
|
|
|
rcIpAdEntVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The VrfId used in this table is to associate VLANs
|
|
or Brouter ports to a VRF after the creation of VLANs
|
|
or Brouter ports.
|
|
VRFID 0 is reserved for the Administrative VRF."
|
|
|
|
::= { rcIpAddrEntry 12 }
|
|
|
|
-- FlowContorl Group
|
|
|
|
rcIpFlowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IpFlow Table. This table contain entries that
|
|
correspond to RSVP records in the switching
|
|
fabric Address Resolution table.
|
|
|
|
A connection that has a matching entry in this
|
|
table will be processed with a higher priority
|
|
than connections that do not have an entry."
|
|
::= { rcIp 3 }
|
|
|
|
rcIpFlowEntry OBJECT-TYPE
|
|
SYNTAX RcIpFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Proprietary flow control variables."
|
|
INDEX { rcIpFlowSrcIpAddress, rcIpFlowSrcIpPort,
|
|
rcIpFlowDstIpAddress, rcIpFlowDstIpPort,
|
|
rcIpFlowProtocol }
|
|
::= { rcIpFlowTable 1 }
|
|
|
|
RcIpFlowEntry ::=
|
|
SEQUENCE {
|
|
rcIpFlowSrcIpAddress IpAddress,
|
|
rcIpFlowSrcIpPort INTEGER,
|
|
rcIpFlowDstIpAddress IpAddress,
|
|
rcIpFlowDstIpPort INTEGER,
|
|
rcIpFlowProtocol INTEGER,
|
|
rcIpFlowRowStatus RowStatus
|
|
}
|
|
|
|
rcIpFlowSrcIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The source IP address of an IP packet."
|
|
::= { rcIpFlowEntry 1 }
|
|
|
|
rcIpFlowSrcIpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The source port of an IP packet. A zero value
|
|
in this field is used as a wildcard value."
|
|
DEFVAL { 0 }
|
|
::= { rcIpFlowEntry 2 }
|
|
|
|
rcIpFlowDstIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The destination IP address of an IP packet."
|
|
::= { rcIpFlowEntry 3 }
|
|
|
|
rcIpFlowDstIpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The destination port of an IP packet. A zero
|
|
value in this field is used as a wildcard value."
|
|
DEFVAL { 0 }
|
|
::= { rcIpFlowEntry 4 }
|
|
|
|
rcIpFlowProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ip(4), -- ip
|
|
tcp(6), -- tcp
|
|
udp(17) -- udp
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The protocol type of an IP packet. A zero value
|
|
in this field is used as a wildcard value."
|
|
DEFVAL { ip }
|
|
::= { rcIpFlowEntry 5 }
|
|
|
|
rcIpFlowRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Status of entry."
|
|
::= { rcIpFlowEntry 6 }
|
|
|
|
|
|
-- Routing group
|
|
|
|
rcIpRouting OBJECT IDENTIFIER ::= { rcIp 4 }
|
|
|
|
|
|
-- rcIpRouting/rcIpRoutingRedistributeRipToOspf Group
|
|
|
|
rcIpRoutingRedistributeRipToOspf OBJECT IDENTIFIER ::= {rcIpRouting 1}
|
|
|
|
rcIpRoutingRedistributeRipToOspfEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether or not to Redistribute
|
|
RIP routes to OSPF."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutingRedistributeRipToOspf 1 }
|
|
|
|
rcIpRoutingRedistributeRipToOspfExplicitMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Value of metric that is used to translate the
|
|
RIP route to OSPF."
|
|
DEFVAL { 1 }
|
|
::= { rcIpRoutingRedistributeRipToOspf 2 }
|
|
|
|
rcIpRoutingRedistributeRipToOspfUseExplicitMetric OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether or not to use the user
|
|
specified default metric for redistributing
|
|
RIP routes to OSPF."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutingRedistributeRipToOspf 3 }
|
|
|
|
rcIpRoutingRedistributeRipToOspfExternalMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1), -- extenal metric type1
|
|
type2(2) -- extenal metric type2
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to configure the metric type of the
|
|
distributed routes to OSPF domain.
|
|
type1 means the metric is comparable directly
|
|
to the link state metric
|
|
(cost = internal cost + external cost).
|
|
type2 means the metric is considered larger
|
|
than any link state metric (cost = external
|
|
cost)."
|
|
DEFVAL { type2 }
|
|
::= { rcIpRoutingRedistributeRipToOspf 4 }
|
|
|
|
|
|
-- rcIpRouting/rcIpRoutingRedistributeOspfToRip Group
|
|
|
|
rcIpRoutingRedistributeOspfToRip OBJECT IDENTIFIER ::= {rcIpRouting 2}
|
|
|
|
rcIpRoutingRedistributeOspfToRipEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether or not to redistribute
|
|
OSPF routes to RIP."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutingRedistributeOspfToRip 1 }
|
|
|
|
rcIpRoutingRedistributeOspfToRipExplicitMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Value of metric that is used to translate the
|
|
OSPF route to RIP."
|
|
DEFVAL { 1 }
|
|
::= { rcIpRoutingRedistributeOspfToRip 2 }
|
|
|
|
rcIpRoutingRedistributeOspfToRipUseExplicitMetric OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether or not to use the user
|
|
specified default metric for redistributing
|
|
OSPF routes to RIP."
|
|
DEFVAL { true }
|
|
::= { rcIpRoutingRedistributeOspfToRip 3 }
|
|
|
|
-- rcIpRouting/rcIpRoutingRedistributeDirectToOspf Group
|
|
|
|
rcIpRoutingRedistributeDirectToOspf OBJECT IDENTIFIER ::= {rcIpRouting 3}
|
|
|
|
rcIpRoutingRedistributeDirectToOspfEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether directly connected
|
|
networks through non-ospf interfaces are
|
|
distributed to OSPF database or not. If
|
|
set to true all the static routes
|
|
will be added as external routes to OSPF
|
|
routing domain, provided the router is
|
|
configured as AS Border router. Also originates
|
|
asExtern link LSA."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutingRedistributeDirectToOspf 1 }
|
|
|
|
rcIpRoutingRedistributeDirectToOspfMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
usePortSpeed(1),
|
|
useExplicitMetric(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether or not to use the user
|
|
specified default metric for redistributing
|
|
direct routes to OSPF."
|
|
DEFVAL { usePortSpeed }
|
|
::= { rcIpRoutingRedistributeDirectToOspf 2 }
|
|
|
|
rcIpRoutingRedistributeDirectToOspfExplicitMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Value of metric that is used to translate the
|
|
routes to directly connected networks to OSPF."
|
|
DEFVAL { 1 }
|
|
::= { rcIpRoutingRedistributeDirectToOspf 3 }
|
|
|
|
rcIpRoutingRedistributeDirectToOspfExternalMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1), -- extenal metric type1
|
|
type2(2) -- extenal metric type2
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to configure the metric type of the
|
|
distributed routes to OSPF domain.
|
|
type1 means the metric is comparable directly
|
|
to the link state metric
|
|
(cost = internal cost + external cost).
|
|
type2 means the metric is considered larger
|
|
than any link state metric (cost = external
|
|
cost)."
|
|
DEFVAL { type1 }
|
|
::= { rcIpRoutingRedistributeDirectToOspf 4 }
|
|
|
|
|
|
-- rcIpRouting/rcIpRoutingRedistributeStaticToOspf Group
|
|
|
|
rcIpRoutingRedistributeStaticToOspf OBJECT IDENTIFIER ::= {rcIpRouting 4}
|
|
|
|
rcIpRoutingRedistributeStaticToOspfEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether static routes (that
|
|
are configured locally through management
|
|
protocol) are distributed to OSPF database
|
|
or not. If set to true all the static routes
|
|
will be added as external routes to OSPF
|
|
routing domain, provided the router is
|
|
configured as AS Border router. Also originates
|
|
asExtern link LSA."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutingRedistributeStaticToOspf 1 }
|
|
|
|
rcIpRoutingRedistributeStaticToOspfExplicitMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Value of metric that is used to translate the
|
|
static routes to OSPF."
|
|
DEFVAL { 10 }
|
|
::= { rcIpRoutingRedistributeStaticToOspf 2 }
|
|
|
|
rcIpRoutingRedistributeStaticToOspfUseExplicitMetric OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether or not to use the user
|
|
specified default metric for redistributing
|
|
static routes to OSPF."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutingRedistributeStaticToOspf 3 }
|
|
|
|
rcIpRoutingRedistributeStaticToOspfExternalMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1), -- extenal metric type1
|
|
type2(2) -- extenal metric type2
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to configure the metric type of the
|
|
distributed routes to OSPF domain.
|
|
type1 means the metric is comparable directly
|
|
to the link state metric
|
|
(cost = internal cost + external cost).
|
|
type2 means the metric is considered larger
|
|
than any link state metric (cost = external
|
|
cost)."
|
|
DEFVAL { type2 }
|
|
::= { rcIpRoutingRedistributeStaticToOspf 4 }
|
|
|
|
rcIpRoutingRedistributeStaticToOspfAdvertDefRte OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether default route (that
|
|
are configured locally through management
|
|
protocol) should be distributed to OSPF database
|
|
or not. If set to true then the default route will
|
|
be added as external route to OSPF routing domain,
|
|
provided the router is configured as AS Border router.
|
|
Also originates asExtern link LSA."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutingRedistributeStaticToOspf 5 }
|
|
|
|
-- rcIpRouting/rcIpRoutingRedistributeDirectToRip Group
|
|
|
|
rcIpRoutingRedistributeDirectToRip OBJECT IDENTIFIER ::= {rcIpRouting 5}
|
|
|
|
rcIpRoutingRedistributeDirectToRipEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether directly connected
|
|
networks through non-rip interfaces are
|
|
distributed to RIP or not."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutingRedistributeDirectToRip 1 }
|
|
|
|
|
|
-- rcIpRouting/rcIpRoutingRedistributeStaticToRip Group
|
|
|
|
rcIpRoutingRedistributeStaticToRip OBJECT IDENTIFIER ::= {rcIpRouting 6}
|
|
|
|
rcIpRoutingRedistributeStaticToRipEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether static routes (that
|
|
are configured locally through management
|
|
protocol) are distributed to RIP database
|
|
or not. If set to true all the static routes
|
|
will be added as external routes to RIP
|
|
routing domain."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutingRedistributeStaticToRip 1 }
|
|
|
|
|
|
rcIpConfIgmpTable OBJECT-TYPE --excluded
|
|
SYNTAX SEQUENCE OF RcIpConfIgmpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to maintain IGMP information
|
|
for a particular interface."
|
|
::= { rcIp 5 }
|
|
|
|
rcIpConfIgmpEntry OBJECT-TYPE
|
|
SYNTAX RcIpConfIgmpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing IGMP information. An entry is
|
|
automatically created in this table when routing
|
|
is enabled for an interface -or- when an ip address
|
|
is configured on an interface."
|
|
INDEX { rcIpConfIgmpIfIndex }
|
|
::= { rcIpConfIgmpTable 1 }
|
|
|
|
RcIpConfIgmpEntry ::= SEQUENCE {
|
|
rcIpConfIgmpIfIndex INTEGER,
|
|
rcIpConfIgmpQueryInterval INTEGER,
|
|
rcIpConfIgmpVersion INTEGER,
|
|
rcIpConfIgmpQueryMaxResponseTime INTEGER,
|
|
rcIpConfIgmpQuerierPresentTimeout Integer32, --excluded
|
|
rcIpConfIgmpLeaveEnabled TruthValue, --excluded
|
|
rcIpConfIgmpRowStatus RowStatus,
|
|
rcIpConfIgmpRobustness INTEGER,
|
|
rcIpConfIgmpLastMemberQueryInterval INTEGER,
|
|
rcIpConfIgmpSnoopEnable TruthValue,
|
|
rcIpConfIgmpProxySnoopEnable TruthValue
|
|
}
|
|
|
|
rcIpConfIgmpIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN)."
|
|
::= { rcIpConfIgmpEntry 1 }
|
|
|
|
rcIpConfIgmpQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The frequency at which IGMP Host-Query packets are
|
|
transmitted on this interface."
|
|
DEFVAL { 125 }
|
|
::= { rcIpConfIgmpEntry 2 }
|
|
|
|
rcIpConfIgmpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER { version1(1), version2(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The version of IGMP which is running on this
|
|
interface. This object can be used to configure a
|
|
router capable of running either value. For IGMP
|
|
to function correctly, all routers on a LAN must
|
|
be configured to run the same version of IGMP on
|
|
that LAN."
|
|
DEFVAL { version2 }
|
|
::= { rcIpConfIgmpEntry 3 }
|
|
|
|
rcIpConfIgmpQueryMaxResponseTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The maximum query response time advertised in
|
|
IGMPv2 queries on this interface. Smaller values
|
|
allow a router to prune groups faster."
|
|
DEFVAL { 10 }
|
|
::= { rcIpConfIgmpEntry 4 }
|
|
|
|
rcIpConfIgmpQuerierPresentTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "A timeout interval. If no IGMPv2 queries are
|
|
heard on this interface within this timeout
|
|
interval, the local router will take over the
|
|
Querier on the IP subnet to which this interface
|
|
is attached."
|
|
DEFVAL { 255 }
|
|
|
|
::= { rcIpConfIgmpEntry 5 }
|
|
|
|
rcIpConfIgmpLeaveEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "An indication of whether the processing of IGMPv2
|
|
Leave messages is enabled on this interface."
|
|
DEFVAL { true }
|
|
::= { rcIpConfIgmpEntry 6 }
|
|
|
|
rcIpConfIgmpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Status of entry."
|
|
::= { rcIpConfIgmpEntry 7 }
|
|
|
|
rcIpConfIgmpRobustness OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "lossiness of network."
|
|
::= { rcIpConfIgmpEntry 8 }
|
|
|
|
rcIpConfIgmpLastMemberQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "max response in GrpSpec Query."
|
|
::= { rcIpConfIgmpEntry 9 }
|
|
|
|
rcIpConfIgmpSnoopEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable snoop."
|
|
DEFVAL { true }
|
|
::= { rcIpConfIgmpEntry 10 }
|
|
|
|
rcIpConfIgmpProxySnoopEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable proxy snoop."
|
|
DEFVAL { true }
|
|
::= { rcIpConfIgmpEntry 11 }
|
|
|
|
rcIgmpGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "The (conceptual) table listing the multicast
|
|
groups configured in the device."
|
|
::= { rcIp 6 }
|
|
|
|
rcIgmpGroupEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry (conceptual row) representing an
|
|
Igmp group."
|
|
INDEX { rcIgmpGroupIpAddress, rcIgmpGroupMembers }
|
|
::= { rcIgmpGroupTable 1 }
|
|
|
|
RcIgmpGroupEntry ::= SEQUENCE {
|
|
rcIgmpGroupIpAddress IpAddress,
|
|
rcIgmpGroupMembers IpAddress,
|
|
rcIgmpGroupInPort INTEGER,
|
|
rcIgmpGroupExpiration Integer32,
|
|
rcIgmpGroupIfIndex InterfaceIndex,
|
|
rcIgmpGroupUserId DisplayString,
|
|
rcIgmpGroupMemberState INTEGER,
|
|
rcIgmpGroupSessionTime Integer32
|
|
}
|
|
|
|
rcIgmpGroupIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Multicast group Address (Class D) that others
|
|
want to join. A group address can be the same
|
|
for many incoming ports."
|
|
::= { rcIgmpGroupEntry 1 }
|
|
|
|
rcIgmpGroupMembers OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "IP Address of a source that has sent group
|
|
report wishing to join this group."
|
|
::= { rcIgmpGroupEntry 2 }
|
|
|
|
rcIgmpGroupInPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcIgmpGroupEntry 3 }
|
|
|
|
rcIgmpGroupExpiration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Time left before the group report expired on this
|
|
port. Only one of this variable port. This
|
|
variable is updated upon receiving a group report."
|
|
::= { rcIgmpGroupEntry 4 }
|
|
|
|
rcIgmpGroupIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcIgmpGroupEntry 5 }
|
|
|
|
rcIgmpGroupUserId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "User-id sending this group"
|
|
::= { rcIgmpGroupEntry 6 }
|
|
|
|
rcIgmpGroupMemberState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noState(1),
|
|
auth(2),
|
|
accStart(3),
|
|
authAndAcctStart(4),
|
|
authAndAcctDisabled(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used for IGAP, to indicated member state."
|
|
::= { rcIgmpGroupEntry 7 }
|
|
|
|
rcIgmpGroupSessionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used for IGAP, to indicated the session time
|
|
in seconds for the member. Session time is
|
|
started after traffic is available to member.
|
|
It can be also called AccountingTime since its
|
|
values correspondes to the accounting duration of
|
|
IGAP user session."
|
|
::= { rcIgmpGroupEntry 8 }
|
|
|
|
-- IP Route Table
|
|
|
|
rcIpRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This entity's IP Routing table."
|
|
::= { rcIp 7 }
|
|
|
|
rcIpRouteEntry OBJECT-TYPE
|
|
SYNTAX RcIpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A route to a particular destination."
|
|
INDEX { rcIpRouteDest, rcIpRouteMask,
|
|
rcIpRouteNextHop, rcIpRouteAltSequence }
|
|
::= { rcIpRouteTable 1 }
|
|
|
|
RcIpRouteEntry ::=
|
|
SEQUENCE {
|
|
rcIpRouteDest IpAddress,
|
|
rcIpRouteMask IpAddress,
|
|
rcIpRouteNextHop IpAddress,
|
|
rcIpRouteMetric Integer32,
|
|
rcIpRouteIfIndex InterfaceIndex,
|
|
rcIpRouteType INTEGER,
|
|
rcIpRouteProto INTEGER,
|
|
rcIpRouteAge Integer32,
|
|
rcIpRouteRowStatus RowStatus,
|
|
rcIpRoutePref INTEGER,
|
|
rcIpRouteAltSequence Integer32,
|
|
rcIpRoutePathType INTEGER,
|
|
rcIpRouteSrcVrfId VrfIdentifier,
|
|
rcIpRouteNextHopId DisplayString,
|
|
rcIpRouteLayer3VirtualInterfaceType INTEGER,
|
|
rcIpRouteLayer3VirtualInterface Integer32
|
|
}
|
|
|
|
rcIpRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The destination IP address of this route. An
|
|
entry with a value of 0.0.0.0 is considered a
|
|
default route. Multiple routes to a single
|
|
destination can appear in the table, but access to
|
|
such multiple entries is dependent on the table-
|
|
access mechanisms defined by the network
|
|
management protocol in use."
|
|
::= { rcIpRouteEntry 1 }
|
|
|
|
rcIpRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the mask to be logical-ANDed with the
|
|
destination address before being compared to the
|
|
value in the rcIpRouteDest field. For those systems
|
|
that do not support arbitrary subnet masks, an
|
|
agent constructs the value of the rcIpRouteMask by
|
|
determining whether the value of the correspondent
|
|
rcIpRouteDest field belong to a class-A, B, or C
|
|
network, and then using one of:
|
|
|
|
mask network
|
|
255.0.0.0 class-A
|
|
255.255.0.0 class-B
|
|
255.255.255.0 class-C
|
|
|
|
If the value of the rcIpRouteDest is 0.0.0.0 (a
|
|
default route), then the mask value is also
|
|
0.0.0.0. It should be noted that all IP routing
|
|
subsystems implicitly use this mechanism."
|
|
::= { rcIpRouteEntry 2 }
|
|
|
|
rcIpRouteNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the next hop of this route.
|
|
(In the case of a route bound to an interface
|
|
which is realized via a broadcast media, the value
|
|
of this field is the agent's IP address on that
|
|
interface)."
|
|
::= { rcIpRouteEntry 3 }
|
|
|
|
rcIpRouteMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The primary routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
rcIpRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { rcIpRouteEntry 4 }
|
|
|
|
rcIpRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
local interface through which the next hop of this
|
|
route should be reached. The interface identified
|
|
by a particular value of this index is the same
|
|
interface as identified by the same value of
|
|
ifIndex."
|
|
::= { rcIpRouteEntry 5 }
|
|
|
|
rcIpRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
direct(3),
|
|
indirect(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of route."
|
|
::= { rcIpRouteEntry 6 }
|
|
|
|
rcIpRouteProto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
|
|
-- non-protocol information,
|
|
-- e.g., manually configured
|
|
local(2), -- entries
|
|
|
|
-- set via a network
|
|
netmgmt(3), -- management protocol
|
|
|
|
-- obtained via ICMP,
|
|
icmp(4), -- e.g., Redirect
|
|
|
|
-- the remaining values are
|
|
-- all gateway routing
|
|
-- protocols
|
|
egp(5),
|
|
ggp(6),
|
|
hello(7),
|
|
rip(8),
|
|
is-is(9),
|
|
es-is(10),
|
|
ciscoIgrp(11),
|
|
bbnSpfIgp(12),
|
|
ospf(13),
|
|
bgp(14),
|
|
vOspf(15), -- indicates inter-vrf routes added by OSPF
|
|
vBgp(16), -- indicates inter-vrf routes added by BGP
|
|
vRip(17) -- indicates inter-vrf routes added by RIP
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The routing mechanism via which this route was
|
|
learned. Inclusion of values for gateway routing
|
|
protocols is not intended to imply that hosts
|
|
should support those protocols."
|
|
::= { rcIpRouteEntry 7 }
|
|
|
|
rcIpRouteAge OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds since this route was last
|
|
updated or otherwise determined to be correct.
|
|
Note that no semantics of `too old' can be implied
|
|
except through knowledge of the routing protocol
|
|
by which the route was learned."
|
|
::= { rcIpRouteEntry 8 }
|
|
|
|
rcIpRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcIpRouteEntry 9 }
|
|
|
|
rcIpRoutePref OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRouteEntry 10 }
|
|
|
|
rcIpRouteAltSequence OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Alternative Route Sequence. 0 denotes Best Route."
|
|
::= { rcIpRouteEntry 11 }
|
|
|
|
rcIpRoutePathType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
iA(0), -- Indirect Alternative Route w/o ECMP path
|
|
iAE(1), -- Indirect Alternative ECMP path
|
|
iB(2), -- Indirect Best Route w/o ECMP path
|
|
iBE(3), -- Indirect Best ECMP path
|
|
dB(6), -- Direct Best Route
|
|
iAN(8), -- Indirect Alternative route not in HW
|
|
iAEN(9), -- Indirect Alternative ECMP route not in HW
|
|
iBN(10), -- Indirect Best route not in HW
|
|
iBEN(11), -- Indirect Best ECMP route not in HW
|
|
dBN(14), -- Direct Best route not in HW
|
|
iAU(16), -- Indirect Alternative Route Unresolved
|
|
iAEU(17), -- Indirect Alternative ECMP Unresolved
|
|
iBU(18), -- Indirect Best Route Unresolved
|
|
iBEU(19), -- Indirect Best ECMP Unresolved
|
|
dBU(22), -- Direct Best Route Unresolved
|
|
iBF(34), -- Indirect Best route replaced by FTN
|
|
iBEF(35), -- Indirect Best ECMP route replaced by FTN
|
|
iBV(66), -- Indirect best IPVPN route
|
|
iBEV(67), -- Indirect best ECMP IPVPN route
|
|
iBVN(74), -- Indirect best IPVPN route not in HW
|
|
iBEVN(75), -- Indirect best ECMP IPVPN route not in HW
|
|
iAS(128), -- Indirect alternate route type
|
|
iASE(129), -- Indirect alternate ECMP route type
|
|
iBS(130), -- Indirect Best SPBm Route
|
|
iBSE(131), -- Indirect Best SPBm Ecmp route
|
|
iBSN(138), -- SPBm will define this later
|
|
iBSEN(139), -- SPBm will define this later
|
|
iASV(192), -- Indirect alternate VPN route type
|
|
iASVE(193), -- Indirect alternate ECMP route type
|
|
iBSV(194), -- Indirect Best VPN Route over SPBm network
|
|
iBSVE(195) -- Indirect Best VPN ECMP Route over SPBm network
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of route. It is a combination of
|
|
direct, indirect, best, alternative and ECMP path."
|
|
::= { rcIpRouteEntry 12 }
|
|
|
|
rcIpRouteSrcVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "srcVrfId of the next-hop address"
|
|
::= { rcIpRouteEntry 13 }
|
|
|
|
rcIpRouteNextHopId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identifier of the next-hop, hostname or mac adress."
|
|
::= { rcIpRouteEntry 14 }
|
|
|
|
rcIpRouteLayer3VirtualInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- not applicable for route
|
|
spb(2) -- uses I-SID for rcIpRouteLayer3VirtualInterface
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identifies type for value specified in the
|
|
rcIpRouteLayer3VirtualInterface field."
|
|
::= { rcIpRouteEntry 15 }
|
|
|
|
rcIpRouteLayer3VirtualInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identifier of the Layer3 Virtual Interface.
|
|
When the value is an SPB I-SID, 0 denotes GlobalRouter
|
|
and -1 denotes not applicable to route."
|
|
::= { rcIpRouteEntry 16 }
|
|
|
|
-- Ip Config Dhcp Table
|
|
|
|
rcIpConfDhcpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfDhcpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DHCP configuration table"
|
|
::= { rcIp 8 }
|
|
|
|
rcIpConfDhcpEntry OBJECT-TYPE
|
|
SYNTAX RcIpConfDhcpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to configure DHCP on a particular port. An
|
|
entry is created automatically when the variable
|
|
rcIpConfDhcpEnable is set to TRUE.
|
|
|
|
Once created this entry will only be deleted if the
|
|
rcIpConfDhcpRowStatus is set to 'destroy(6)'. In
|
|
which case, the rcIpConfDhcpEnable is automatically
|
|
reset to the FALSE setting."
|
|
INDEX { rcIpConfDhcpIfIndex }
|
|
::= { rcIpConfDhcpTable 1 }
|
|
|
|
RcIpConfDhcpEntry ::=
|
|
SEQUENCE {
|
|
rcIpConfDhcpIfIndex InterfaceIndexOrZero,
|
|
rcIpConfDhcpMaxHop INTEGER,
|
|
rcIpConfDhcpMinSec INTEGER,
|
|
rcIpConfDhcpMode INTEGER,
|
|
rcIpConfDhcpRowStatus RowStatus,
|
|
rcIpConfDhcpNumRequests Counter32,
|
|
rcIpConfDhcpNumReplies Counter32,
|
|
rcIpConfDhcpAlwaysBroadcast TruthValue,
|
|
rcIpConfDhcpClearCounters INTEGER,
|
|
rcIpConfDhcpCounterClearTime TimeStamp,
|
|
rcIpConfDhcpCircuitId TruthValue,
|
|
rcIpConfDhcpRemoteId TruthValue,
|
|
rcIpConfDhcpTrusted TruthValue,
|
|
rcIpConfDhcpAgentAddr IpAddress
|
|
}
|
|
|
|
rcIpConfDhcpIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero (0..6142)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Interface number. The number can represent either
|
|
a physical or logical(VLAN) interface."
|
|
::= { rcIpConfDhcpEntry 1 }
|
|
|
|
rcIpConfDhcpMaxHop OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the maximum number of hops a
|
|
DHCP packet can take from the source device to
|
|
the destination device (i.e., DHCP client to
|
|
DHCP server)."
|
|
DEFVAL { 4 }
|
|
::= { rcIpConfDhcpEntry 2 }
|
|
|
|
rcIpConfDhcpMinSec OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the minimum number of seconds
|
|
to wait between receiving a DHCP packet and
|
|
actually forwarding the DHCP packet to the
|
|
destination device. A value of zero(0) indicates
|
|
forwarding should be done immediately without any
|
|
delay."
|
|
DEFVAL { 0 }
|
|
::= { rcIpConfDhcpEntry 3 }
|
|
|
|
rcIpConfDhcpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
bootp(2),
|
|
dhcp(3),
|
|
both(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate what type of DHCP packets this
|
|
interface should support. A value of none(1) will
|
|
result in all incoming DHCP and BOOTP packets to
|
|
be dropped."
|
|
DEFVAL { both }
|
|
::= { rcIpConfDhcpEntry 4 }
|
|
|
|
rcIpConfDhcpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An entry is created automatically when the variable
|
|
rcIpConfDhcpEnable is set to TRUE.
|
|
|
|
Once created this entry will only be deleted if the
|
|
rcIpConfDhcpRowStatus is set to 'destroy(6)'. In
|
|
which case, the rcIpConfDhcpEnable is automatically
|
|
reset to the FALSE setting."
|
|
::= { rcIpConfDhcpEntry 5 }
|
|
|
|
rcIpConfDhcpNumRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of DHCP requests seen on this interface."
|
|
::= { rcIpConfDhcpEntry 6 }
|
|
|
|
rcIpConfDhcpNumReplies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of DHCP replies seen on this interface."
|
|
::= { rcIpConfDhcpEntry 7 }
|
|
|
|
rcIpConfDhcpAlwaysBroadcast OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate if DHCP Reply packets should be
|
|
broadcast to the DHCP client on this interface."
|
|
DEFVAL { false }
|
|
::= { rcIpConfDhcpEntry 8 }
|
|
|
|
rcIpConfDhcpClearCounters OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1),
|
|
dummy(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used to clear the DHCP counters
|
|
in an entry. When set to clear(1), the values of
|
|
the counter objects in the entry will be reset to
|
|
0. When read, the value of this object is always
|
|
dummy(2)."
|
|
DEFVAL { dummy }
|
|
::= { rcIpConfDhcpEntry 9 }
|
|
|
|
rcIpConfDhcpCounterClearTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the time at which the counter
|
|
values in this entry were last reset to 0."
|
|
::= { rcIpConfDhcpEntry 10 }
|
|
|
|
rcIpConfDhcpCircuitId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate if DHCP packets should have
|
|
option82 circuitId info inserted before sent to
|
|
servers, for this interface."
|
|
DEFVAL { false }
|
|
::= { rcIpConfDhcpEntry 11 }
|
|
|
|
rcIpConfDhcpRemoteId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate if DHCP packets should have
|
|
option82 remoteId info inserted before sent to
|
|
servers, for this interface."
|
|
DEFVAL { false }
|
|
::= { rcIpConfDhcpEntry 12 }
|
|
|
|
rcIpConfDhcpTrusted OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate if DHCP packets come through a
|
|
trusted dhcp circuit. This means that packets with
|
|
giaddr set to 0 having option82 in it, will be forwarded
|
|
if the circuit is trusted."
|
|
DEFVAL { false }
|
|
::= { rcIpConfDhcpEntry 13 }
|
|
|
|
rcIpConfDhcpAgentAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address configured as relay on this interface; it is either the IP of the
|
|
physical interface or the IP of the VRRP address"
|
|
::= { rcIpConfDhcpEntry 14 }
|
|
|
|
|
|
|
|
-- Ip Dhcp Forward Table
|
|
|
|
rcIpDhcpForwardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpDhcpForwardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DHCP forwarding table."
|
|
::= { rcIp 9 }
|
|
|
|
rcIpDhcpForwardEntry OBJECT-TYPE
|
|
SYNTAX RcIpDhcpForwardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry used represents a DHCP forwarding directive."
|
|
INDEX { rcIpDhcpForwardAgentAddr, rcIpDhcpForwardServerAddr }
|
|
::= { rcIpDhcpForwardTable 1 }
|
|
|
|
RcIpDhcpForwardEntry ::=
|
|
SEQUENCE {
|
|
rcIpDhcpForwardAgentAddr IpAddress,
|
|
rcIpDhcpForwardServerAddr IpAddress,
|
|
rcIpDhcpForwardEnable TruthValue,
|
|
rcIpDhcpForwardMode INTEGER,
|
|
rcIpDhcpForwardRowStatus RowStatus
|
|
}
|
|
|
|
rcIpDhcpForwardAgentAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address configured on an interface
|
|
(i.e., a locally configured IP address)."
|
|
::= { rcIpDhcpForwardEntry 1 }
|
|
|
|
rcIpDhcpForwardServerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the DHCP server. If this
|
|
IP address corresponds to a locally configured
|
|
IP network, the DHCP packet is broadcasted out
|
|
the interface the IP address is assigned to.
|
|
This behavior is known as 'relay agent' mode.
|
|
|
|
If this IP address is a remote address, the DHCP
|
|
packet is sent via unicast to the remote device.
|
|
This behavior is known as 'preferred server' mode."
|
|
::= { rcIpDhcpForwardEntry 2 }
|
|
|
|
rcIpDhcpForwardEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this entry should be used."
|
|
DEFVAL { true }
|
|
::= { rcIpDhcpForwardEntry 3 }
|
|
|
|
rcIpDhcpForwardMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
bootp(2),
|
|
dhcp(3),
|
|
both(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this entry pertains to
|
|
BOOTP packets, DHCP packets, or both."
|
|
DEFVAL { both }
|
|
::= { rcIpDhcpForwardEntry 4 }
|
|
|
|
rcIpDhcpForwardRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpDhcpForwardEntry 5 }
|
|
|
|
-- ===========================================================================
|
|
-- DHCP forwarding scalar objects
|
|
-- ===========================================================================
|
|
|
|
rcIpDhcpForwardingScalars OBJECT IDENTIFIER ::= { rcIp 28 }
|
|
|
|
rcIpDhcpForwardingEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether DHCP forwarding is globally enabled."
|
|
::= { rcIpDhcpForwardingScalars 1 }
|
|
|
|
rcIpDhcpForwardingOption82Enabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the use of DHCP option 82 is enabled."
|
|
::= { rcIpDhcpForwardingScalars 2 }
|
|
|
|
rcIpDhcpForwardingMaxFrameLength OBJECT-TYPE
|
|
SYNTAX Integer32 (576..1536)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum DHCP frame length."
|
|
::= { rcIpDhcpForwardingScalars 3 }
|
|
|
|
rcIpDhcpForwardingOption82RemoteId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
macAddress(1),
|
|
ipAddress(2),
|
|
hostname(3),
|
|
customString(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to control what value will be used for the
|
|
DHCP option 82 remote-id suboption."
|
|
::= { rcIpDhcpForwardingScalars 4 }
|
|
|
|
rcIpDhcpForwardingOption82RemoteIdString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to set the string wich will be used for the
|
|
value of the DHCP option 82 remote-id when the value of
|
|
rcIpDhcpForwardingOption82RemoteId is set to customString(4)."
|
|
::= { rcIpDhcpForwardingScalars 5 }
|
|
|
|
|
|
-- Ip DHCP Relay Agent Information Option Statistics Table
|
|
|
|
|
|
rcIpDhcpOp82StatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpDhcpOp82StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DHCP statistics table for Relay Agent Information Option"
|
|
::= { rcIp 29 }
|
|
|
|
rcIpDhcpOp82StatsEntry OBJECT-TYPE
|
|
SYNTAX RcIpDhcpOp82StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to see current statistics on interfaces that have
|
|
DHCP Option 82 (Relay Agent Information) enabled.
|
|
This table is read-only."
|
|
INDEX { rcIpDhcpOp82StatsIfIndex }
|
|
::= { rcIpDhcpOp82StatsTable 1 }
|
|
|
|
RcIpDhcpOp82StatsEntry ::=
|
|
SEQUENCE {
|
|
rcIpDhcpOp82StatsIfIndex InterfaceIndexOrZero,
|
|
rcIpDhcpOp82StatsFoundOp82 Counter32,
|
|
rcIpDhcpOp82StatsDropped Counter32,
|
|
rcIpDhcpOp82StatsCircuitId INTEGER,
|
|
rcIpDhcpOp82StatsAddedCircuitId Counter32,
|
|
rcIpDhcpOp82StatsRemovedCircuitId Counter32,
|
|
rcIpDhcpOp82StatsRemoteId MacAddress,
|
|
rcIpDhcpOp82StatsAddedRemoteId Counter32,
|
|
rcIpDhcpOp82StatsRemovedRemoteId Counter32,
|
|
rcIpDhcpOp82StatsAgentAddr IpAddress
|
|
}
|
|
|
|
rcIpDhcpOp82StatsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero (0..6142)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface number. The number can represent either
|
|
a physical or logical(VLAN) interface."
|
|
::= { rcIpDhcpOp82StatsEntry 1 }
|
|
|
|
rcIpDhcpOp82StatsFoundOp82 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Represents the number of packets received on the interface
|
|
that already had Dhcp Option 82 inserted in them"
|
|
::= { rcIpDhcpOp82StatsEntry 2 }
|
|
|
|
rcIpDhcpOp82StatsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Represents the number of packets dropped because of reasons related
|
|
to Dhcp Option 82. These reasons could be that the packet was received
|
|
from an untrusted source or spoofing was detected."
|
|
::= { rcIpDhcpOp82StatsEntry 3 }
|
|
|
|
rcIpDhcpOp82StatsCircuitId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Represents the value of CircuitId inserted in the packets.
|
|
This is the Port number of the Dhcp Relay."
|
|
::= { rcIpDhcpOp82StatsEntry 4 }
|
|
|
|
rcIpDhcpOp82StatsAddedCircuitId OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Represents the number of packets which had CircuitId inserted on this interface"
|
|
::= { rcIpDhcpOp82StatsEntry 5 }
|
|
|
|
rcIpDhcpOp82StatsRemovedCircuitId OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Represents the number of packets which had CircuitId removed on this interface"
|
|
::= { rcIpDhcpOp82StatsEntry 6 }
|
|
|
|
rcIpDhcpOp82StatsRemoteId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Represents the value of RemoteId inserted in the packets.
|
|
This is the Mac address of the Dhcp Relay."
|
|
::= { rcIpDhcpOp82StatsEntry 7 }
|
|
|
|
rcIpDhcpOp82StatsAddedRemoteId OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Represents the number of packets which had RemoteId inserted on this interface"
|
|
::= { rcIpDhcpOp82StatsEntry 8 }
|
|
|
|
rcIpDhcpOp82StatsRemovedRemoteId OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Represents the number of packets which had RemoteId removed on this interface"
|
|
::= { rcIpDhcpOp82StatsEntry 9 }
|
|
|
|
rcIpDhcpOp82StatsAgentAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address configured as relay on this interface; it is either the IP of the
|
|
physical interface or the IP of the VRRP address"
|
|
::= { rcIpDhcpOp82StatsEntry 10 }
|
|
|
|
|
|
-- IP Filter Group
|
|
|
|
rcIpFilter OBJECT IDENTIFIER ::= { rcIp 10 }
|
|
|
|
rcIpFilterFilterTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpFilterTable."
|
|
::= { rcIpFilter 1 }
|
|
|
|
rcIpFilterGlobalListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpFilterGlobalListTable."
|
|
::= { rcIpFilter 2 }
|
|
|
|
rcIpFilterBaseListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpFilterBaseListTable."
|
|
::= { rcIpFilter 3 }
|
|
|
|
rcIpFilterPortTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpFilterPortTable."
|
|
::= { rcIpFilter 4 }
|
|
|
|
rcIpFilterNextAvailFilterId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "next available filter-id in the
|
|
rcIpFilterPortTable."
|
|
::= { rcIpFilter 5 }
|
|
|
|
|
|
-- IP Filter Table
|
|
|
|
rcIpFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing IP filters."
|
|
::= { rcIpFilter 20 }
|
|
|
|
rcIpFilterEntry OBJECT-TYPE
|
|
SYNTAX RcIpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP filter attributes.
|
|
|
|
The system supports a vast array of filter options.
|
|
Each of these options are supported in this entry.
|
|
If a particular option is not used, the column
|
|
should be set to zero."
|
|
INDEX { rcIpFilterType, rcIpFilterDstAddr,
|
|
rcIpFilterDstMask, rcIpFilterSrcAddr,
|
|
rcIpFilterSrcMask, rcIpFilterId }
|
|
::= { rcIpFilterTable 1 }
|
|
|
|
RcIpFilterEntry ::= SEQUENCE {
|
|
rcIpFilterType INTEGER,
|
|
rcIpFilterDstAddr IpAddress,
|
|
rcIpFilterDstMask IpAddress,
|
|
rcIpFilterSrcAddr IpAddress,
|
|
rcIpFilterSrcMask IpAddress,
|
|
rcIpFilterId INTEGER,
|
|
rcIpFilterName DisplayString,
|
|
rcIpFilterProtocolType INTEGER,
|
|
rcIpFilterSrcPort INTEGER,
|
|
rcIpFilterSrcOption INTEGER,
|
|
rcIpFilterDstPort INTEGER,
|
|
rcIpFilterDstOption INTEGER,
|
|
rcIpFilterCopyToCpu TruthValue, --excluded
|
|
rcIpFilterMirror TruthValue,
|
|
rcIpFilterHighPriority TruthValue, --excluded
|
|
rcIpFilterTcpConnect TruthValue,
|
|
rcIpFilterIeeeVlanPriority INTEGER,
|
|
rcIpFilterUsePktLimit TruthValue, --excluded
|
|
rcIpFilterPktLimit INTEGER, --excluded
|
|
rcIpFilterRowStatus RowStatus,
|
|
rcIpFilterMode INTEGER,
|
|
rcIpFilterIpTosRule INTEGER, --excluded
|
|
rcIpFilterStopOnMatch TruthValue,
|
|
rcIpFilterDiffServMatchIeee8021PEnable TruthValue,
|
|
rcIpFilterDiffServMatchIeee8021P INTEGER,
|
|
rcIpFilterDiffServMatchDscpEnable TruthValue,
|
|
rcIpFilterDiffServMatchDscp DisplayString,
|
|
rcIpFilterDiffServMatchDscpReserved DisplayString,
|
|
rcIpFilterDiffServModifyIeee8021PEnable TruthValue,
|
|
rcIpFilterDiffServModifyIeee8021P INTEGER,
|
|
rcIpFilterDiffServModifyDscpEnable TruthValue,
|
|
rcIpFilterDiffServModifyDscp DisplayString,
|
|
rcIpFilterDiffServModifyDscpReserved DisplayString,
|
|
rcIpFilterDiffServTrafficProfileId INTEGER,
|
|
rcIpFilterMatchIcmpRequest TruthValue,
|
|
rcIpFilterMatchIpFragment TruthValue,
|
|
rcIpFilterStatisticEnable TruthValue,
|
|
rcIpFilterInOctets Counter64,
|
|
rcIpFilterInPackets Counter64,
|
|
rcIpFilterRateLimitDiscardPackets Counter64,
|
|
rcIpFilterNextHopForwardIpAddr IpAddress,
|
|
rcIpFilterNextHopUnreachableDropEnable TruthValue,
|
|
rcIpFilterProtocolTypeUsrDefined INTEGER,
|
|
rcIpFilterIngressOctets Counter64,
|
|
rcIpFilterIngressPkts Counter64,
|
|
rcIpFilterRateLimitDiscardPkts Counter64
|
|
}
|
|
|
|
rcIpFilterType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
global(1),
|
|
destination(2),
|
|
source(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate a particular type of filter.
|
|
|
|
A 'global' filter is a filter that is applied to
|
|
all packets irregardless of the packet's source
|
|
or destination IP address.
|
|
|
|
A 'destination' filter is used to match the
|
|
destination IP address field of incoming packets.
|
|
When a match is found, this filter is applied to
|
|
the packet.
|
|
|
|
A 'source' filter is used to match the source
|
|
IP address field of incoming packets. When a
|
|
match is found, this filter is applied to the
|
|
packet."
|
|
::= { rcIpFilterEntry 1 }
|
|
|
|
rcIpFilterDstAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Destination IP address to filter on."
|
|
::= { rcIpFilterEntry 2 }
|
|
|
|
rcIpFilterDstMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Destination IP subnet mask to filter on."
|
|
::= { rcIpFilterEntry 3 }
|
|
|
|
rcIpFilterSrcAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Source IP address to filter on."
|
|
::= { rcIpFilterEntry 4 }
|
|
|
|
rcIpFilterSrcMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Source IP subnet mask to filter on."
|
|
::= { rcIpFilterEntry 5 }
|
|
|
|
rcIpFilterId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This filter's unique identifier(id). This id
|
|
is automatically generated by the system when
|
|
a filter is created. This id is used in the
|
|
'rcIpFilterGlobalListTable' and
|
|
'rcIpFilterBaseListTable' when grouping one
|
|
or more filters into a filter list."
|
|
::= { rcIpFilterEntry 6 }
|
|
|
|
rcIpFilterName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This filter's name."
|
|
::= { rcIpFilterEntry 7 }
|
|
|
|
rcIpFilterProtocolType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ignore(0),
|
|
icmp(1),
|
|
tcp(6),
|
|
udp(17),
|
|
ipsecesp(50),
|
|
ipsecah(51),
|
|
ospf(89),
|
|
vrrp(112),
|
|
usrDefined(256)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of protocol to filter on."
|
|
DEFVAL { ignore }
|
|
::= { rcIpFilterEntry 8 }
|
|
|
|
rcIpFilterSrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TCP/UDP source port to filter on."
|
|
DEFVAL { 0 }
|
|
::= { rcIpFilterEntry 9 }
|
|
|
|
rcIpFilterSrcOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
equal(0),
|
|
notEqual(1),
|
|
greater(2),
|
|
less(3),
|
|
ignore(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of matching to perform on the field
|
|
'rcIpFilterSrcPort'.
|
|
|
|
For 'source' and 'destination' filters, this
|
|
value can only be 'equal(1)'."
|
|
DEFVAL { ignore }
|
|
::= { rcIpFilterEntry 10 }
|
|
|
|
rcIpFilterDstPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TCP/UDP destination port to filter on."
|
|
DEFVAL { 0 }
|
|
::= { rcIpFilterEntry 11 }
|
|
|
|
rcIpFilterDstOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
equal(0),
|
|
notEqual(1),
|
|
greater(2),
|
|
less(3),
|
|
ignore(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of matching to perform on the field
|
|
'rcIpFilterDstPort'.
|
|
|
|
For 'source' and 'destination' filters, this
|
|
value can only be 'equal(1)'."
|
|
DEFVAL { ignore }
|
|
::= { rcIpFilterEntry 12 }
|
|
|
|
rcIpFilterCopyToCpu OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to specify whether a packet matching
|
|
this filter should be copied to the CPU."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 13 }
|
|
|
|
rcIpFilterMirror OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether a packet matching
|
|
this filter should be mirrored to the port
|
|
specified by 'rcMirrorByPortMirrorPort'."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 14 }
|
|
|
|
rcIpFilterHighPriority OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to specify whether a packet matching
|
|
this filter should be forwarded with high
|
|
priority."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 15 }
|
|
|
|
rcIpFilterTcpConnect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether a TCP packet matching
|
|
this filter should be accepted. Pass only
|
|
those matching TCP packets with either the
|
|
ACK bit or RST bit set. Apply only if the IP
|
|
Protocol is set to TCP."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 16 }
|
|
|
|
rcIpFilterIeeeVlanPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the priority bits for explicit
|
|
IEEE VLAN tag for a packet matching this filter.
|
|
If this priority bit field is greater than the
|
|
priority field currently in the IEEE tag in the
|
|
Packet Header, this priority field will be loaded
|
|
into the Packet Header."
|
|
DEFVAL { 0 }
|
|
::= { rcIpFilterEntry 17 }
|
|
|
|
rcIpFilterUsePktLimit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to specify whether the 'rcIpFilterPktLimit'
|
|
field in this entry should be used when applying
|
|
this filter."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 18 }
|
|
|
|
rcIpFilterPktLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The maximum packet size limit to filter against."
|
|
DEFVAL { 1500 }
|
|
::= { rcIpFilterEntry 19 }
|
|
|
|
rcIpFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpFilterEntry 20 }
|
|
|
|
rcIpFilterMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
useDefaultAction(1),
|
|
forward(2),
|
|
drop(3),
|
|
forwardToNextHop(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the operation mode for this entry.
|
|
'useDefaultAction' means use the setting specified
|
|
in the 'rcIpFilterPortDefaultAction' variable.
|
|
|
|
'forward' means forward the packet if the packet
|
|
satisfies this policy.
|
|
|
|
'drop' means drop the packet if the packet satisfies
|
|
this policy.
|
|
|
|
'forwardToNextHop' means forward the packet to the next hop
|
|
if the packet satisfies this policy.
|
|
|
|
This variable setting has higher precedence than the
|
|
setting in 'rcIpFilterPortDefaultAction'."
|
|
DEFVAL { useDefaultAction }
|
|
::= { rcIpFilterEntry 21 }
|
|
|
|
rcIpFilterIpTosRule OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
ipTosRule1(1),
|
|
ipTosRule2(2),
|
|
ipTosRule3(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to specify the operation mode for this entry.
|
|
'none' means do not manupulate the Ip ToS byte.
|
|
'ipTosRule1' means manipulate the Ip ToS byte
|
|
according to Quid/Gid Rule 1 which is defined in
|
|
rcIpTosRuleOrRule1.
|
|
'ipTosRule2' means manipulate the Ip ToS byte
|
|
according to Quid/Gid Rule 2 which is defined in
|
|
rcIpTosRuleOrRule2.
|
|
'ipTosRule3' means manipulate the Ip ToS byte
|
|
according to Quid/Gid Rule 3 which is defined in
|
|
rcIpTosRuleOrRule3."
|
|
DEFVAL { none }
|
|
::= { rcIpFilterEntry 22 }
|
|
|
|
rcIpFilterStopOnMatch OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to stop further filtering if this filter
|
|
is applied."
|
|
DEFVAL { true }
|
|
::= { rcIpFilterEntry 23 }
|
|
|
|
rcIpFilterDiffServMatchIeee8021PEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether the value stored in the
|
|
variable 'rcIpFilterDiffServMatchIeee8021P' should
|
|
be used in this filter."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 24 }
|
|
|
|
rcIpFilterDiffServMatchIeee8021P OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the match value for the 802.1P
|
|
field. If the 802.1P field in the incoming packet
|
|
matches this value, then this filter will be
|
|
applied to the packet."
|
|
DEFVAL { 0 }
|
|
::= { rcIpFilterEntry 25 }
|
|
|
|
rcIpFilterDiffServMatchDscpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether the values stored in the
|
|
variable 'rcIpFilterDiffServMatchDscp' and
|
|
'rcIpFilterDiffServMatchDscpReserved' should
|
|
be used in this filter."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 26 }
|
|
|
|
rcIpFilterDiffServMatchDscp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the match value for the DSCP.
|
|
If the DSCP in the incoming packet matches this
|
|
value, then this filter will be applied to the
|
|
packet.
|
|
|
|
The DSCP represents the high-order 6 bits of
|
|
the TOS byte (in network order)."
|
|
::= { rcIpFilterEntry 27 }
|
|
|
|
rcIpFilterDiffServMatchDscpReserved OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(2))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the match value of the low-order
|
|
2 bits of the TOS byte (in network order)."
|
|
DEFVAL { '00000000'B }
|
|
::= { rcIpFilterEntry 28 }
|
|
|
|
rcIpFilterDiffServModifyIeee8021PEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether the value stored in the
|
|
variable 'rcIpFilterDiffServModifyIeee8021P' should
|
|
be used in this filter."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 29 }
|
|
|
|
rcIpFilterDiffServModifyIeee8021P OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the value the 802.1P field
|
|
should be modified to if this filter is applied.
|
|
The modification is applied at the egress point."
|
|
DEFVAL { 0 }
|
|
::= { rcIpFilterEntry 30 }
|
|
|
|
rcIpFilterDiffServModifyDscpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether the value stored in the
|
|
variable 'rcIpFilterDiffServModifyDscp' should
|
|
be used in this filter."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 31 }
|
|
|
|
rcIpFilterDiffServModifyDscp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify what the value of the DSCP
|
|
should be modified to if this filter is applied.
|
|
The modification is applied at the egress point.
|
|
|
|
The DSCP represents the high-order 6 bits of
|
|
the TOS byte (in network order)."
|
|
::= { rcIpFilterEntry 32 }
|
|
|
|
rcIpFilterDiffServModifyDscpReserved OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(2))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the modify value of the low-order
|
|
2 bits of the TOS byte (in network order)."
|
|
DEFVAL { '00000000'B }
|
|
::= { rcIpFilterEntry 33 }
|
|
|
|
rcIpFilterDiffServTrafficProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify which traffic profile should
|
|
be applied to packets matching this filter.
|
|
Traffic profiles are specified in the
|
|
'rc2kQosTrafficProfileTable' table. A '0'
|
|
value means do not apply any traffic profile."
|
|
DEFVAL { 0 }
|
|
::= { rcIpFilterEntry 34 }
|
|
|
|
rcIpFilterMatchIcmpRequest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether matching on ICMP
|
|
Request packets should be performed."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 35 }
|
|
|
|
rcIpFilterMatchIpFragment OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether matching on fragmented
|
|
IP packets should be performed."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 36 }
|
|
|
|
rcIpFilterStatisticEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to turn on/off Counters for this filter."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterEntry 37 }
|
|
|
|
rcIpFilterInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of In-Octets for this filter."
|
|
::= { rcIpFilterEntry 38 }
|
|
|
|
rcIpFilterInPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of In-Packets for this filter."
|
|
::= { rcIpFilterEntry 39 }
|
|
|
|
rcIpFilterRateLimitDiscardPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of packets discarded due to rate
|
|
limiting."
|
|
::= { rcIpFilterEntry 40 }
|
|
|
|
rcIpFilterNextHopForwardIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Next hop forward Ip address."
|
|
::= { rcIpFilterEntry 41 }
|
|
|
|
rcIpFilterNextHopUnreachableDropEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If next hop is unreachalbe, enable/disable to drop the packet."
|
|
::= { rcIpFilterEntry 42 }
|
|
|
|
rcIpFilterProtocolTypeUsrDefined OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When rcIpFilterProtocolType is set to usrDefined(256)
|
|
in an IP Filter, this field represents the 8-bit user defined
|
|
protocol identifier."
|
|
DEFVAL { 0 }
|
|
::= { rcIpFilterEntry 43 }
|
|
|
|
rcIpFilterIngressOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of In-Octets for this filter."
|
|
::= { rcIpFilterEntry 44 }
|
|
|
|
rcIpFilterIngressPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of In-Packets for this filter."
|
|
::= { rcIpFilterEntry 45 }
|
|
|
|
rcIpFilterRateLimitDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets discarded due to rate
|
|
limiting."
|
|
::= { rcIpFilterEntry 46 }
|
|
|
|
|
|
|
|
-- IP Filter Global List Table
|
|
|
|
rcIpFilterGlobalListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpFilterGlobalListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store global filter list information.
|
|
Each row in the table contains a set of individual
|
|
filters that make up a particular filter list."
|
|
::= { rcIpFilter 21 }
|
|
|
|
rcIpFilterGlobalListEntry OBJECT-TYPE
|
|
SYNTAX RcIpFilterGlobalListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Global filter list attributes."
|
|
INDEX { rcIpFilterGlobalListId }
|
|
::= { rcIpFilterGlobalListTable 1 }
|
|
|
|
RcIpFilterGlobalListEntry ::= SEQUENCE {
|
|
rcIpFilterGlobalListId INTEGER,
|
|
rcIpFilterGlobalListName DisplayString,
|
|
rcIpFilterGlobalListFilterIdListSize INTEGER,
|
|
rcIpFilterGlobalListFilterIdList IdList,
|
|
rcIpFilterGlobalListRowStatus RowStatus,
|
|
rcIpFilterGlobalListMemberPorts PortSet
|
|
}
|
|
|
|
rcIpFilterGlobalListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a particular global
|
|
filter list."
|
|
::= { rcIpFilterGlobalListEntry 1 }
|
|
|
|
rcIpFilterGlobalListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of this filter list."
|
|
::= { rcIpFilterGlobalListEntry 2 }
|
|
|
|
rcIpFilterGlobalListFilterIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of filters are
|
|
associated with this filter list."
|
|
::= { rcIpFilterGlobalListEntry 3 }
|
|
|
|
rcIpFilterGlobalListFilterIdList OBJECT-TYPE
|
|
SYNTAX IdList (SIZE(16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate zero or more filters that are
|
|
associated with this filter list. Each filter
|
|
identifier is stored as two bytes in this array
|
|
starting from offset zero. Any unused bytes
|
|
should be set to zero."
|
|
::= { rcIpFilterGlobalListEntry 4 }
|
|
|
|
rcIpFilterGlobalListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpFilterGlobalListEntry 5 }
|
|
|
|
rcIpFilterGlobalListMemberPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ports filter is used on."
|
|
::= { rcIpFilterGlobalListEntry 6 }
|
|
|
|
|
|
-- IP Filter Base Table
|
|
|
|
rcIpFilterBaseListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpFilterBaseListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store base filter list information.
|
|
Each row in the table contains a set of individual
|
|
filters that make up a particular filter list."
|
|
::= { rcIpFilter 22 }
|
|
|
|
rcIpFilterBaseListEntry OBJECT-TYPE
|
|
SYNTAX RcIpFilterBaseListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Base filter list attributes."
|
|
INDEX { rcIpFilterBaseListId }
|
|
::= { rcIpFilterBaseListTable 1 }
|
|
|
|
RcIpFilterBaseListEntry ::= SEQUENCE {
|
|
rcIpFilterBaseListId INTEGER,
|
|
rcIpFilterBaseListName DisplayString,
|
|
rcIpFilterBaseListFilterIdListSize INTEGER,
|
|
rcIpFilterBaseListFilterIdList IdList,
|
|
rcIpFilterBaseListRowStatus RowStatus,
|
|
rcIpFilterBaseListMemberPorts PortSet
|
|
}
|
|
|
|
rcIpFilterBaseListId OBJECT-TYPE
|
|
SYNTAX INTEGER (300..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a particular base
|
|
filter list."
|
|
::= { rcIpFilterBaseListEntry 1 }
|
|
|
|
rcIpFilterBaseListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of this filter list."
|
|
::= { rcIpFilterBaseListEntry 2 }
|
|
|
|
rcIpFilterBaseListFilterIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of filters are
|
|
associated with this filter list."
|
|
::= { rcIpFilterBaseListEntry 3 }
|
|
|
|
rcIpFilterBaseListFilterIdList OBJECT-TYPE
|
|
SYNTAX IdList (SIZE(256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate zero or more filters that are
|
|
associated with this filter list. Each filter
|
|
identifier is stored as two bytes in this array
|
|
starting from offset zero. Any unused bytes
|
|
should be set to zero."
|
|
::= { rcIpFilterBaseListEntry 4 }
|
|
|
|
rcIpFilterBaseListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpFilterBaseListEntry 5 }
|
|
|
|
rcIpFilterBaseListMemberPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ports filter is used on."
|
|
::= { rcIpFilterBaseListEntry 6 }
|
|
|
|
|
|
-- IP Filter Port Table
|
|
|
|
rcIpFilterPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpFilterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store port filtering information."
|
|
::= { rcIpFilter 23 }
|
|
|
|
rcIpFilterPortEntry OBJECT-TYPE
|
|
SYNTAX RcIpFilterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port entry attributes."
|
|
INDEX { rcIpFilterPortIfIndex }
|
|
::= { rcIpFilterPortTable 1 }
|
|
|
|
RcIpFilterPortEntry ::= SEQUENCE {
|
|
rcIpFilterPortIfIndex InterfaceIndex,
|
|
rcIpFilterPortFilterListSize INTEGER,
|
|
rcIpFilterPortFilterList OCTET STRING,
|
|
rcIpFilterPortMode INTEGER,
|
|
rcIpFilterPortEnable TruthValue,
|
|
rcIpFilterPortRowStatus RowStatus,
|
|
rcIpFilterPortDefaultAction INTEGER,
|
|
rcIpFilterPortNumGlobalFilters Integer32,
|
|
rcIpFilterPortNumBaseFilters Integer32
|
|
}
|
|
|
|
rcIpFilterPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IfIndex value of a port where filtering is
|
|
applied."
|
|
::= { rcIpFilterPortEntry 1 }
|
|
|
|
rcIpFilterPortFilterListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of filter list(s)
|
|
that are assigned to this port."
|
|
::= { rcIpFilterPortEntry 2 }
|
|
|
|
rcIpFilterPortFilterList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate zero or more filter lists that
|
|
are associated with this port. Each filter list
|
|
identifier is stored as two bytes in this array
|
|
starting from offset zero. Any unused bytes
|
|
should be set to zero."
|
|
::= { rcIpFilterPortEntry 3 }
|
|
|
|
rcIpFilterPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate when filters applied to this
|
|
port should be treated as 'permit' or 'deny'
|
|
filters.
|
|
|
|
When filters are not enabled on the port the mode
|
|
is set to none. The port does not block any packet.
|
|
Mode None cannot be used when PortEnable is true.
|
|
|
|
On a port configured as 'permit', any packet
|
|
that satisfies a filter is allowed to be
|
|
forwarded.
|
|
|
|
On a port configured as 'deny', any packet that
|
|
satisfies a filter is dropped."
|
|
DEFVAL { none }
|
|
::= { rcIpFilterPortEntry 4 }
|
|
|
|
rcIpFilterPortEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether filtering is configured
|
|
on this port."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterPortEntry 5 }
|
|
|
|
rcIpFilterPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpFilterPortEntry 6 }
|
|
|
|
rcIpFilterPortDefaultAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forward(1),
|
|
drop(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the default action that should
|
|
be performed when an IP filter applies to a
|
|
particular port.
|
|
|
|
When filters are not enabled on the port the action
|
|
is set to 'none' which means the port does not block
|
|
any packet. 'none' cannot be used when PortEnable is
|
|
true.
|
|
|
|
On a port configured as 'forward', any packet
|
|
that satisfies a filter is allowed to be
|
|
forwarded.
|
|
|
|
On a port configured as 'drop', any packet that
|
|
satisfies a filter is dropped."
|
|
DEFVAL { none }
|
|
::= { rcIpFilterPortEntry 7 }
|
|
|
|
rcIpFilterPortNumGlobalFilters OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "# of global filters"
|
|
::= { rcIpFilterPortEntry 8 }
|
|
|
|
rcIpFilterPortNumBaseFilters OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "# of base filters"
|
|
::= { rcIpFilterPortEntry 9 }
|
|
|
|
-- IP Filter Media Device Table
|
|
|
|
rcIpFilterMediaDevTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpFilterMediaDevTable."
|
|
::= { rcIpFilter 24 }
|
|
|
|
rcIpFilterMediaDevTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpFilterMediaDevEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store media filter list information.
|
|
Each row in the table contains a set of individual
|
|
filters that make up a particular filter list for
|
|
a particular platform/device combination."
|
|
::= { rcIpFilter 25 }
|
|
|
|
rcIpFilterMediaDevEntry OBJECT-TYPE
|
|
SYNTAX RcIpFilterMediaDevEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Device attributes and the filters' attributes."
|
|
INDEX { rcIpFilterMediaDevId }
|
|
::= { rcIpFilterMediaDevTable 1 }
|
|
|
|
RcIpFilterMediaDevEntry ::= SEQUENCE {
|
|
rcIpFilterMediaDevId INTEGER,
|
|
rcIpFilterMediaDevName DisplayString,
|
|
rcIpFilterMediaDevPlatformType INTEGER,
|
|
rcIpFilterMediaDevDeviceType INTEGER,
|
|
rcIpFilterMediaDevIpAddress IpAddress,
|
|
rcIpFilterMediaDevStreamsIds IdList,
|
|
rcIpFilterMediaDevMemberPorts PortSet,
|
|
rcIpFilterMediaDevStatisticEnable TruthValue,
|
|
rcIpFilterMediaDevRowStatus RowStatus
|
|
}
|
|
|
|
rcIpFilterMediaDevId OBJECT-TYPE
|
|
SYNTAX INTEGER (3000..3127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Media Id in the rcIpFilterMediaDevTable."
|
|
::= { rcIpFilterMediaDevEntry 1 }
|
|
|
|
rcIpFilterMediaDevName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Media Device Name. This includes the platform
|
|
and the physical/soft device."
|
|
::= { rcIpFilterMediaDevEntry 2 }
|
|
|
|
rcIpFilterMediaDevPlatformType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
cse1k(1),
|
|
cse2k(2),
|
|
cse3k(3),
|
|
bcm(4),
|
|
meridianLineCard(5),
|
|
meridianTrunkCard(6),
|
|
msl100IP(7),
|
|
vcon(8),
|
|
minerva(9),
|
|
useDefined(10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Platform identifier or type. These are the
|
|
currently supported platforms."
|
|
DEFVAL { none }
|
|
::= { rcIpFilterMediaDevEntry 3 }
|
|
|
|
rcIpFilterMediaDevDeviceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
i2002(1),
|
|
i2004(2),
|
|
i2050(3),
|
|
tps(4),
|
|
gateway(5),
|
|
useDefined(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Device identifier or type. There are the currently
|
|
supported device types."
|
|
DEFVAL { none }
|
|
::= { rcIpFilterMediaDevEntry 4 }
|
|
|
|
rcIpFilterMediaDevIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Media Device IP Address."
|
|
::= { rcIpFilterMediaDevEntry 5 }
|
|
|
|
rcIpFilterMediaDevStreamsIds OBJECT-TYPE
|
|
SYNTAX IdList (SIZE(16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An array used to identify which streams are assigned
|
|
to MediaDevEntry. Each stream ID is stored as a two
|
|
octet value. The first octet in the pair holds bits
|
|
15-8 of the stream ID, while the second octet holds
|
|
bits 7-0 of the stream ID."
|
|
::= { rcIpFilterMediaDevEntry 6 }
|
|
|
|
rcIpFilterMediaDevMemberPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Media Device port port members. These are the system
|
|
physical ports."
|
|
::= { rcIpFilterMediaDevEntry 7 }
|
|
|
|
rcIpFilterMediaDevStatisticEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to turn on/off statistics' counters for all the filters for the device."
|
|
DEFVAL { false }
|
|
::= { rcIpFilterMediaDevEntry 8 }
|
|
|
|
rcIpFilterMediaDevRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row Status."
|
|
::= { rcIpFilterMediaDevEntry 9 }
|
|
|
|
|
|
-- IP Filter Media Stream Table
|
|
|
|
rcIpFilterMediaStreamTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpFilterMediaStreamTable."
|
|
::= { rcIpFilter 26 }
|
|
|
|
rcIpFilterMediaStreamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpFilterMediaStreamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store tcp/udp port information
|
|
for a set of filters that make up a particular
|
|
filter list for a particular platform/device
|
|
combination."
|
|
::= { rcIpFilter 27 }
|
|
|
|
rcIpFilterMediaStreamEntry OBJECT-TYPE
|
|
SYNTAX RcIpFilterMediaStreamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Layer 4 Port attributes and the filters' attributes."
|
|
INDEX { rcIpFilterMediaStreamMediaId,
|
|
rcIpFilterMediaStreamStreamId }
|
|
::= { rcIpFilterMediaStreamTable 1 }
|
|
|
|
RcIpFilterMediaStreamEntry ::= SEQUENCE {
|
|
rcIpFilterMediaStreamMediaId INTEGER,
|
|
rcIpFilterMediaStreamStreamId INTEGER,
|
|
rcIpFilterMediaStreamName DisplayString,
|
|
rcIpFilterMediaStreamProtocol INTEGER,
|
|
rcIpFilterMediaStreamPortMin INTEGER,
|
|
rcIpFilterMediaStreamPortMax INTEGER,
|
|
rcIpFilterMediaStreamPortOption INTEGER,
|
|
rcIpFilterMediaStreamType INTEGER,
|
|
rcIpFilterMediaStreamRemarkDscp DisplayString,
|
|
rcIpFilterMediaStreamMatchDscp DisplayString,
|
|
rcIpFilterMediaStreamRowStatus RowStatus
|
|
}
|
|
|
|
rcIpFilterMediaStreamMediaId OBJECT-TYPE
|
|
SYNTAX INTEGER (3000..3127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Media Id in the rcIpFilterMediaDevTable."
|
|
::= { rcIpFilterMediaStreamEntry 1 }
|
|
|
|
rcIpFilterMediaStreamStreamId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port range Id in the rcIpFilterMediaStreamTable."
|
|
::= { rcIpFilterMediaStreamEntry 2 }
|
|
|
|
rcIpFilterMediaStreamName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Media Stream Name."
|
|
::= { rcIpFilterMediaStreamEntry 3 }
|
|
|
|
rcIpFilterMediaStreamProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcp(6),
|
|
udp(17)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of transport protocol to filter on. Multimedia
|
|
applications often use UDP and some use TCP. Any
|
|
Layer 4 protocol number supported by IP can be added here
|
|
in future."
|
|
DEFVAL { udp }
|
|
::= { rcIpFilterMediaStreamEntry 4 }
|
|
|
|
rcIpFilterMediaStreamPortMin OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TCP/UDP source or destination port to filter on."
|
|
::= { rcIpFilterMediaStreamEntry 5 }
|
|
|
|
rcIpFilterMediaStreamPortMax OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TCP/UDP source or destination port to filter on."
|
|
::= { rcIpFilterMediaStreamEntry 6 }
|
|
|
|
rcIpFilterMediaStreamPortOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
src(1),
|
|
dest(2),
|
|
srcDest(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Src port or destination port of both."
|
|
DEFVAL { srcDest }
|
|
::= { rcIpFilterMediaStreamEntry 7 }
|
|
|
|
rcIpFilterMediaStreamType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
signal(1),
|
|
media(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of stream to filter on."
|
|
DEFVAL { media }
|
|
::= { rcIpFilterMediaStreamEntry 8 }
|
|
|
|
rcIpFilterMediaStreamRemarkDscp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to specify what the value of the DSCP should
|
|
be modified to if this stream is identified. The
|
|
modification is applied at the egress point. The
|
|
DSCP represents the high-order 6 bits of the TOS byte
|
|
(in network order)."
|
|
DEFVAL { '00000000'B }
|
|
::= { rcIpFilterMediaStreamEntry 9 }
|
|
|
|
rcIpFilterMediaStreamMatchDscp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify what the value of the DSCP should
|
|
be match with in the stream identification. DSCP
|
|
represents the high-order 6 bit of the TOS byte
|
|
(in network order)."
|
|
DEFVAL { '00000000'B }
|
|
::= { rcIpFilterMediaStreamEntry 10 }
|
|
|
|
rcIpFilterMediaStreamRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row Status."
|
|
::= { rcIpFilterMediaStreamEntry 11 }
|
|
|
|
|
|
-- IP Policy Address Table
|
|
|
|
rcIpPolicy OBJECT IDENTIFIER ::= { rcIp 11 }
|
|
|
|
rcIpPolicyAddrTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpPolicyAddrTable."
|
|
::= { rcIpPolicy 1 }
|
|
|
|
rcIpPolicyAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPolicyAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to store different types list entries.
|
|
Each row in the table contains a list entry that is
|
|
used by a set of announce policies."
|
|
::= { rcIpPolicy 2 }
|
|
|
|
rcIpPolicyAddrEntry OBJECT-TYPE
|
|
SYNTAX RcIpPolicyAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Route entry attributes."
|
|
INDEX {rcIpPolicyAddrIpAddr}
|
|
::= { rcIpPolicyAddrTable 1 }
|
|
|
|
RcIpPolicyAddrEntry ::= SEQUENCE {
|
|
rcIpPolicyAddrIpAddr IpAddress,
|
|
rcIpPolicyAddrId Integer32,
|
|
rcIpPolicyAddrAddrListIdListSize INTEGER,
|
|
rcIpPolicyAddrAddrListIdList OCTET STRING,
|
|
rcIpPolicyAddrRowStatus RowStatus
|
|
}
|
|
|
|
|
|
rcIpPolicyAddrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The network address for this type of list entry. This
|
|
value is required for all types of lists."
|
|
::= { rcIpPolicyAddrEntry 1 }
|
|
|
|
rcIpPolicyAddrId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Identifier of this entry. Used internally to identify
|
|
this entry."
|
|
::= { rcIpPolicyAddrEntry 2 }
|
|
|
|
rcIpPolicyAddrAddrListIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of id(s) in the
|
|
rcIpPolicyAddrListIdList variable."
|
|
::= { rcIpPolicyAddrEntry 3 }
|
|
|
|
rcIpPolicyAddrAddrListIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more rcIpPolicyAddrListEntry(s)
|
|
that are referring to this entry. Each list-id identifier
|
|
is stored as two bytes in this array starting from
|
|
offset zero. Any unused bytes should be set to zero."
|
|
::= { rcIpPolicyAddrEntry 4 }
|
|
|
|
rcIpPolicyAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpPolicyAddrEntry 5 }
|
|
|
|
|
|
-- Ip Policy Network Table
|
|
|
|
rcIpPolicyNetTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpPolicyNetTable."
|
|
::= { rcIpPolicy 3 }
|
|
|
|
rcIpPolicyNetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPolicyNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to store different types list entries.
|
|
Each row in the table contains a list entry that is
|
|
used by a set of announce policies."
|
|
::= { rcIpPolicy 4 }
|
|
|
|
rcIpPolicyNetEntry OBJECT-TYPE
|
|
SYNTAX RcIpPolicyNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Route entry attributes."
|
|
INDEX {rcIpPolicyNetAddr, rcIpPolicyNetMask }
|
|
::= { rcIpPolicyNetTable 1 }
|
|
|
|
RcIpPolicyNetEntry ::= SEQUENCE {
|
|
rcIpPolicyNetAddr IpAddress,
|
|
rcIpPolicyNetMask IpAddress,
|
|
rcIpPolicyNetId Integer32,
|
|
rcIpPolicyNetNetListIdListSize INTEGER,
|
|
rcIpPolicyNetNetListIdList OCTET STRING,
|
|
rcIpPolicyNetRowStatus RowStatus
|
|
}
|
|
|
|
rcIpPolicyNetAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The network address for this type of list entry. This
|
|
value is required for all types of lists."
|
|
::= { rcIpPolicyNetEntry 1 }
|
|
|
|
rcIpPolicyNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The route mask for this type of list entry. This
|
|
value is meaningful only if rcIpPolicyNetEntry
|
|
is equal to exactNet(1), rangeNet(2), advertiseNet(3).
|
|
For other types it should have the value 0.0.0.0."
|
|
::= { rcIpPolicyNetEntry 2 }
|
|
|
|
rcIpPolicyNetId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used internally to recognize this entry."
|
|
::= { rcIpPolicyNetEntry 3 }
|
|
|
|
rcIpPolicyNetNetListIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of id(s) in the
|
|
rcIpPolicyNetListIdList variable."
|
|
::= { rcIpPolicyNetEntry 4 }
|
|
|
|
rcIpPolicyNetNetListIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more rcIpPolicyNetListEntry(s)
|
|
that are referring to this entry. Each list-id identifier
|
|
is stored as two bytes in this array starting from
|
|
offset zero. Any unused bytes should be set to zero."
|
|
::= { rcIpPolicyNetEntry 5 }
|
|
|
|
rcIpPolicyNetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpPolicyNetEntry 6 }
|
|
|
|
|
|
-- IP Policy Address List Table
|
|
|
|
rcIpPolicyAddrListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpPolicyAddrListTable."
|
|
::= { rcIpPolicy 5 }
|
|
|
|
rcIpPolicyAddrListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPolicyAddrListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to group rcIpPolicyAddrEntry(s)
|
|
into a list."
|
|
::= { rcIpPolicy 6 }
|
|
|
|
rcIpPolicyAddrListEntry OBJECT-TYPE
|
|
SYNTAX RcIpPolicyAddrListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Route entry attributes."
|
|
INDEX { rcIpPolicyAddrListId }
|
|
::= { rcIpPolicyAddrListTable 1 }
|
|
|
|
RcIpPolicyAddrListEntry ::= SEQUENCE {
|
|
rcIpPolicyAddrListId INTEGER,
|
|
rcIpPolicyAddrListName DisplayString,
|
|
rcIpPolicyAddrListIdListSize INTEGER,
|
|
rcIpPolicyAddrListIdList OCTET STRING,
|
|
rcIpPolicyAddrListPolicyIdListSize INTEGER,
|
|
rcIpPolicyAddrListPolicyIdList OCTET STRING,
|
|
rcIpPolicyAddrListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpPolicyAddrListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "A value that uniquely identifies this list of
|
|
rcIpPolicyAddrListEntry."
|
|
::= { rcIpPolicyAddrListEntry 1 }
|
|
|
|
rcIpPolicyAddrListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "An administratively-assigned name for this list."
|
|
::= { rcIpPolicyAddrListEntry 3 }
|
|
|
|
rcIpPolicyAddrListIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of rcIpPolicyAddrNetEntry
|
|
id(s) in the rcIpPolicyAddrListIdList variable."
|
|
::= { rcIpPolicyAddrListEntry 4 }
|
|
|
|
rcIpPolicyAddrListIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more AddrListId that
|
|
are associated to this list. Each AddrList identifier
|
|
is stored as two bytes in this array starting from
|
|
offset zero. Any unused bytes should be set to zero."
|
|
::= { rcIpPolicyAddrListEntry 5 }
|
|
|
|
rcIpPolicyAddrListPolicyIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of policy id(s) in the
|
|
Policy Id list. That are referring to this list."
|
|
::= { rcIpPolicyAddrListEntry 6 }
|
|
|
|
rcIpPolicyAddrListPolicyIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more policies that
|
|
are referring to this entry. Each policy identifier
|
|
is stored as two bytes in this array starting from
|
|
offset zero. Any unused bytes should be set to zero."
|
|
::= { rcIpPolicyAddrListEntry 7 }
|
|
|
|
|
|
rcIpPolicyAddrListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpPolicyAddrListEntry 8 }
|
|
|
|
|
|
-- RIP Announce Policy Table
|
|
|
|
rcIpPolicyRipAnnounceTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpPolicyRipAnnounceTable."
|
|
::= { rcIpPolicy 7 }
|
|
|
|
rcIpPolicyRipAnnounceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPolicyRipAnnounceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to store set of announce policies
|
|
configured for RIP routing protocol. The Number
|
|
of entries is given by rcIpPolicyNumRipPolicies."
|
|
::= { rcIpPolicy 8 }
|
|
|
|
rcIpPolicyRipAnnounceEntry OBJECT-TYPE
|
|
SYNTAX RcIpPolicyRipAnnounceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular announce policy."
|
|
INDEX { rcIpPolicyRipAnnounceId }
|
|
::= { rcIpPolicyRipAnnounceTable 1 }
|
|
|
|
RcIpPolicyRipAnnounceEntry ::= SEQUENCE {
|
|
rcIpPolicyRipAnnounceId INTEGER,
|
|
rcIpPolicyRipAnnounceName DisplayString,
|
|
rcIpPolicyRipAnnounceEnable TruthValue,
|
|
rcIpPolicyRipAnnounceExactNetListId INTEGER,
|
|
rcIpPolicyRipAnnounceRangeNetListId INTEGER,
|
|
rcIpPolicyRipAnnounceRipGatewayListId INTEGER,
|
|
rcIpPolicyRipAnnounceRipInterfaceListId INTEGER,
|
|
rcIpPolicyRipAnnounceOspfRouterListId INTEGER,
|
|
rcIpPolicyRipAnnounceAnnounceInterfaceListId INTEGER,
|
|
rcIpPolicyRipAnnouncePrecedence INTEGER,
|
|
rcIpPolicyRipAnnounceRouteSource INTEGER,
|
|
rcIpPolicyRipAnnounceAdvertiseNetListId INTEGER,
|
|
rcIpPolicyRipAnnounceAction INTEGER,
|
|
rcIpPolicyRipAnnounceOspfRouteType INTEGER,
|
|
rcIpPolicyRipAnnounceRipMetric INTEGER,
|
|
rcIpPolicyRipAnnounceRowStatus RowStatus
|
|
}
|
|
|
|
rcIpPolicyRipAnnounceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "A value that uniquely identifies the policy
|
|
associated with this entry."
|
|
::= { rcIpPolicyRipAnnounceEntry 1 }
|
|
|
|
rcIpPolicyRipAnnounceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "An administratively-assigned name for this policy."
|
|
::= { rcIpPolicyRipAnnounceEntry 2 }
|
|
|
|
rcIpPolicyRipAnnounceEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "It indicates whether this policy is enabled or not.
|
|
The policy should be applied only if it is set to 'true'."
|
|
DEFVAL { true }
|
|
::= { rcIpPolicyRipAnnounceEntry 3 }
|
|
|
|
rcIpPolicyRipAnnounceExactNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of 'exact' type entries
|
|
that are configured for this policy.
|
|
|
|
An entry with type 'exactNet' or 'rangeNet' represents
|
|
the network list. This indicates which networks will
|
|
match a particular announce policy.
|
|
|
|
An entry with a 'exact' type means to only match the
|
|
specific network advertisement (netaddr & mask).
|
|
|
|
An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0
|
|
means 'match the default route'.
|
|
|
|
If set to '0', this policy applies to all the routes."
|
|
|
|
::= { rcIpPolicyRipAnnounceEntry 4 }
|
|
|
|
rcIpPolicyRipAnnounceRangeNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more 'range' network entries
|
|
that are associated with this policy.
|
|
|
|
An entry with a 'range' type means to match any network
|
|
number that falls in the range indicated by the addr &
|
|
mask.
|
|
|
|
A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0
|
|
means 'match any route'.
|
|
|
|
If set to '0', this policy applies to all the routes."
|
|
|
|
::= { rcIpPolicyRipAnnounceEntry 5 }
|
|
|
|
rcIpPolicyRipAnnounceRipGatewayListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to identify the RIP-gatewayList in the list
|
|
that are associated with this policy.
|
|
|
|
This field has meaning only for RIP sourced routes and
|
|
if RIP is included as a RouteSource.
|
|
The list contains one or more rip-routers (other side
|
|
of the interface) addresses that could send RIP updates
|
|
to this router. If a router
|
|
address is included in this list, this policy applies to
|
|
RIP advertisements from that router.
|
|
|
|
If set to '0', this policy applies to RIP updates
|
|
received from any rip routers/interfaces."
|
|
|
|
::= { rcIpPolicyRipAnnounceEntry 6 }
|
|
|
|
rcIpPolicyRipAnnounceRipInterfaceListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
ripInterfaceIdList that are configured for this policy.
|
|
|
|
This field has meaning only for RIP sourced routes and
|
|
if RIP is included as a RouteSource. The list contains
|
|
one or more rip-interface addresses on this router.
|
|
If an interface address is incuded in this list, this
|
|
policy applies to RIP advertisements received on that
|
|
interface.
|
|
|
|
A value of '0' indicates thtat this policy applies to
|
|
RIP updates received on any rip-interface."
|
|
|
|
::= { rcIpPolicyRipAnnounceEntry 7 }
|
|
|
|
rcIpPolicyRipAnnounceOspfRouterListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
OspfRouteIds that are configured for this policy.
|
|
|
|
This field has meaning only for OSPF sourced routes and
|
|
if OSPF is included as a RouteSource. The list contains
|
|
one or more router IDs of OSPF routers. If a routerId
|
|
is included in this list, this policy applies to
|
|
OSPF advertisements received from that router.
|
|
|
|
A value of '0' indicates that this policy applies to
|
|
any OPSF routes received from any router."
|
|
|
|
::= { rcIpPolicyRipAnnounceEntry 8 }
|
|
|
|
rcIpPolicyRipAnnounceAnnounceInterfaceListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
AnnounceInterfaceids that are configured for this policy.
|
|
|
|
The list contains one or more outbound interface
|
|
addresses. If the outbound interface address in this
|
|
list, the policy applies to RIP updates/advertisements
|
|
sent through this interface.
|
|
|
|
A value of '0' indicates that this policy applies to
|
|
any outbound RIP interface on this router."
|
|
|
|
::= { rcIpPolicyRipAnnounceEntry 9 }
|
|
|
|
rcIpPolicyRipAnnouncePrecedence OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Is used while comparing this policy rule with other
|
|
policy that a given route may match. A rule with a
|
|
higher precedence value will be chosen over one with
|
|
a smaller value. In the case of a tie, the PolicyId is
|
|
used (larger wins)."
|
|
::= { rcIpPolicyRipAnnounceEntry 10 }
|
|
|
|
rcIpPolicyRipAnnounceRouteSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
direct(1),
|
|
static(2),
|
|
rip(4),
|
|
ospf(8),
|
|
any(15)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Is represented as bitset to indicate route sources.
|
|
It can contain one or more route sources. If the route
|
|
source is in this bit map, then a route from that source
|
|
that meets the other criteria of this policy will match
|
|
the policy."
|
|
DEFVAL { any }
|
|
::= { rcIpPolicyRipAnnounceEntry 11 }
|
|
|
|
rcIpPolicyRipAnnounceAdvertiseNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
AdvertiseNetList that are configured for this policy.
|
|
|
|
This has meaning only if the Action is set to 'announce'.
|
|
It is useful to send or advertise networks that differ
|
|
from actual network in the routing table. Also allows
|
|
advertisement of an aggregate or default along with the
|
|
actual network. Aggregation is useful if a number of
|
|
routes in the table falls in a certain range. Can save
|
|
space by sending aggregate route instead of the individual
|
|
routes.
|
|
|
|
Actual network/route is included in the update
|
|
only if there is a match or there there is an entry
|
|
(address & mask pair) 255.255.255.255/255.255.255.255
|
|
in the list."
|
|
|
|
::= { rcIpPolicyRipAnnounceEntry 12 }
|
|
|
|
rcIpPolicyRipAnnounceAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
announce(1),
|
|
ignore(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "It indicates whether the route should be announced
|
|
or not."
|
|
DEFVAL { ignore }
|
|
::= { rcIpPolicyRipAnnounceEntry 13 }
|
|
|
|
rcIpPolicyRipAnnounceOspfRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1),
|
|
type2(2),
|
|
external(3),
|
|
internal(4),
|
|
any(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Ospf Route type. It applies to OSPF sourced routes only.
|
|
'type1' means to apply this policy to only type1 OSPF
|
|
external routes. 'type2' means to apply this policy to
|
|
only type2 OSPF external routes. 'internal' means 'match
|
|
ospf specfic routes'. 'any' means apply this policy to
|
|
all OSPF external routes."
|
|
DEFVAL { any }
|
|
::= { rcIpPolicyRipAnnounceEntry 14 }
|
|
|
|
rcIpPolicyRipAnnounceRipMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "RIP metric. The value is meaningful only if the action
|
|
is set to 'announce'. This is optional export metric
|
|
to use when advertising a route that matches this policy.
|
|
If set to zero, the routing table metric calculated for
|
|
RIP is is used."
|
|
DEFVAL {0}
|
|
::= { rcIpPolicyRipAnnounceEntry 15 }
|
|
|
|
rcIpPolicyRipAnnounceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpPolicyRipAnnounceEntry 16 }
|
|
|
|
-- OSPF Announce policy table.
|
|
|
|
rcIpPolicyOspfAnnounceTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpPolicyOspfAnnounceTable."
|
|
::= { rcIpPolicy 9 }
|
|
|
|
|
|
rcIpPolicyOspfAnnounceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPolicyOspfAnnounceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to store set of announce policies
|
|
configured for OSPF routing protocol. The Number
|
|
of entries is given by rcIpPolicyNumOspfPolicies."
|
|
::= { rcIpPolicy 10 }
|
|
|
|
rcIpPolicyOspfAnnounceEntry OBJECT-TYPE
|
|
SYNTAX RcIpPolicyOspfAnnounceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular announce policy."
|
|
INDEX { rcIpPolicyOspfAnnounceId }
|
|
::= { rcIpPolicyOspfAnnounceTable 1 }
|
|
|
|
RcIpPolicyOspfAnnounceEntry ::= SEQUENCE {
|
|
rcIpPolicyOspfAnnounceId INTEGER,
|
|
rcIpPolicyOspfAnnounceName DisplayString,
|
|
rcIpPolicyOspfAnnounceEnable TruthValue,
|
|
rcIpPolicyOspfAnnounceExactNetListId INTEGER,
|
|
rcIpPolicyOspfAnnounceRangeNetListId INTEGER,
|
|
rcIpPolicyOspfAnnounceRipGatewayListId INTEGER,
|
|
rcIpPolicyOspfAnnounceRipInterfaceListId INTEGER,
|
|
rcIpPolicyOspfAnnouncePrecedence INTEGER,
|
|
rcIpPolicyOspfAnnounceRouteSource INTEGER,
|
|
rcIpPolicyOspfAnnounceAdvertiseNetListId INTEGER,
|
|
rcIpPolicyOspfAnnounceAction INTEGER,
|
|
rcIpPolicyOspfAnnounceExtMetricType INTEGER,
|
|
rcIpPolicyOspfAnnounceExtMetric INTEGER,
|
|
rcIpPolicyOspfAnnounceRowStatus RowStatus
|
|
}
|
|
|
|
rcIpPolicyOspfAnnounceId OBJECT-TYPE
|
|
SYNTAX INTEGER (2001..3000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "A value that uniquely identifies the policy
|
|
associated with this entry."
|
|
::= { rcIpPolicyOspfAnnounceEntry 1 }
|
|
|
|
rcIpPolicyOspfAnnounceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "An administratively-assigned name for this policy."
|
|
::= { rcIpPolicyOspfAnnounceEntry 2 }
|
|
|
|
rcIpPolicyOspfAnnounceEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "It indicates whether this policy is enabled or not.
|
|
The policy should be applied only if it is set to
|
|
'true'."
|
|
DEFVAL { true }
|
|
::= { rcIpPolicyOspfAnnounceEntry 3 }
|
|
|
|
rcIpPolicyOspfAnnounceExactNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of 'exact' type entries
|
|
that are configured for this policy.
|
|
|
|
An entry with type 'exactNet' or 'rangeNet' represents
|
|
the network list. This indicates which networks will
|
|
match a particular announce policy.
|
|
|
|
An entry with a 'exact' type means to only match the
|
|
specific network advertisement (netaddr & mask).
|
|
|
|
An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0
|
|
means 'match the default route'.
|
|
|
|
If set to '0', this policy applies to all the routes."
|
|
|
|
::= { rcIpPolicyOspfAnnounceEntry 4 }
|
|
|
|
rcIpPolicyOspfAnnounceRangeNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more 'range' network entries
|
|
that are associated with this policy.
|
|
|
|
An entry with a 'range' type means to match any network
|
|
number that falls in the range indicated by the addr &
|
|
mask.
|
|
|
|
A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0
|
|
means 'match any route'.
|
|
|
|
If set to '0', this policy applies to all the routes."
|
|
|
|
::= { rcIpPolicyOspfAnnounceEntry 5 }
|
|
|
|
rcIpPolicyOspfAnnounceRipGatewayListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to identify the RIP-gatewayList in the list
|
|
that are associated with this policy.
|
|
|
|
This field has meaning only for RIP sourced routes and
|
|
if RIP is included as a RouteSource.
|
|
The list contains one or more rip-routers (other side
|
|
of the interface) addresses that could send RIP updates
|
|
to this router. If a router
|
|
address is included in this list, this policy applies to
|
|
RIP advertisements from that router.
|
|
|
|
If set to '0', this policy applies to RIP updates
|
|
received from any rip routers/interfaces."
|
|
|
|
::= { rcIpPolicyOspfAnnounceEntry 6 }
|
|
|
|
rcIpPolicyOspfAnnounceRipInterfaceListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
ripInterfaceIdList that are configured for this policy.
|
|
|
|
This field has meaning only for RIP sourced routes and
|
|
if RIP is included as a RouteSource. The list contains
|
|
one or more rip-interface addresses on this router.
|
|
If an interface address is incuded in this list, this
|
|
policy applies to RIP advertisements received on that
|
|
interface.
|
|
|
|
A value of '0' indicates thtat this policy applies to
|
|
RIP updates received on any rip-interface."
|
|
|
|
::= { rcIpPolicyOspfAnnounceEntry 7 }
|
|
|
|
|
|
rcIpPolicyOspfAnnouncePrecedence OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Is used while comparing this policy rule with other
|
|
policy that a given route may match. A rule with a
|
|
higher precedence value will be chosen over one with
|
|
a smaller value. In the case of a tie, the PolicyId is
|
|
used (larger wins)."
|
|
::= { rcIpPolicyOspfAnnounceEntry 8 }
|
|
|
|
rcIpPolicyOspfAnnounceRouteSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
direct(1),
|
|
static(2),
|
|
rip(4),
|
|
any(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Is represented as bit map to indicate route sources.
|
|
It can contain one or more route sources. If the route
|
|
source is in this bit map, then a route from that source
|
|
that meets the other criteria of this policy will match
|
|
the policy."
|
|
DEFVAL { any }
|
|
::= { rcIpPolicyOspfAnnounceEntry 9 }
|
|
|
|
rcIpPolicyOspfAnnounceAdvertiseNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
AdvertiseNetList that are configured for this policy.
|
|
|
|
This has meaning only if the Action is set to 'announce'.
|
|
It is useful to send or advertise networks that differ
|
|
from actual network in the routing table. Also allows
|
|
advertisement of an aggregate or default along with the
|
|
actual network. Aggregation is useful if a number of
|
|
routes in the table falls in a certain range. Can save
|
|
space by sending aggregate route instead of the individual
|
|
routes.
|
|
|
|
Actual network/route is included in the update
|
|
only if there is a match or there there is an entry
|
|
(address & mask pair) 255.255.255.255/255.255.255.255
|
|
in the list."
|
|
|
|
::= { rcIpPolicyOspfAnnounceEntry 10 }
|
|
|
|
rcIpPolicyOspfAnnounceAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
announce(1),
|
|
ignore(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "It indicates whether the route should be announced
|
|
or not."
|
|
DEFVAL { ignore }
|
|
::= { rcIpPolicyOspfAnnounceEntry 11 }
|
|
|
|
rcIpPolicyOspfAnnounceExtMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1),
|
|
type2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Ospf External metric type. It is used to indicate
|
|
what type of the external metric it is. 'type1' means to
|
|
the cost is 'internal ospf cost + ExtMetric'.
|
|
'type2' means the ospf-metric is equal to 'type2'."
|
|
DEFVAL { type2 }
|
|
::= { rcIpPolicyOspfAnnounceEntry 12 }
|
|
|
|
rcIpPolicyOspfAnnounceExtMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "OSPF External metric. The value is meaningful only if
|
|
the action is set to 'announce'. This is optional export
|
|
metric to use when advertising a route that matches this
|
|
policy. Value '0' is used to indicate that route's actual
|
|
cost is used to announce."
|
|
DEFVAL { 0 }
|
|
::= { rcIpPolicyOspfAnnounceEntry 13 }
|
|
|
|
rcIpPolicyOspfAnnounceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpPolicyOspfAnnounceEntry 14 }
|
|
|
|
-- IP Accept Policy Groups
|
|
|
|
-- RIP Accept policy table.
|
|
|
|
rcIpPolicyRipAcceptTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpPolicyRipAcceptTable."
|
|
::= { rcIpPolicy 11 }
|
|
|
|
rcIpPolicyRipAcceptTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPolicyRipAcceptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to store set of accept policies
|
|
configured for RIP routing protocol. The Number
|
|
of entries is given by rcIpPolicyNumRipPolicies."
|
|
::= { rcIpPolicy 12 }
|
|
|
|
rcIpPolicyRipAcceptEntry OBJECT-TYPE
|
|
SYNTAX RcIpPolicyRipAcceptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular accept policy."
|
|
INDEX { rcIpPolicyRipAcceptId }
|
|
::= { rcIpPolicyRipAcceptTable 1 }
|
|
|
|
RcIpPolicyRipAcceptEntry ::= SEQUENCE {
|
|
rcIpPolicyRipAcceptId INTEGER,
|
|
rcIpPolicyRipAcceptName DisplayString,
|
|
rcIpPolicyRipAcceptEnable TruthValue,
|
|
rcIpPolicyRipAcceptExactNetListId INTEGER,
|
|
rcIpPolicyRipAcceptRangeNetListId INTEGER,
|
|
rcIpPolicyRipAcceptRipGatewayListId INTEGER,
|
|
rcIpPolicyRipAcceptRipInterfaceListId INTEGER,
|
|
rcIpPolicyRipAcceptPrecedence INTEGER,
|
|
rcIpPolicyRipAcceptAction INTEGER,
|
|
rcIpPolicyRipAcceptInjectNetListId INTEGER,
|
|
rcIpPolicyRipAcceptApplyMask IpAddress,
|
|
rcIpPolicyRipAcceptRowStatus RowStatus
|
|
}
|
|
|
|
rcIpPolicyRipAcceptId OBJECT-TYPE
|
|
SYNTAX INTEGER (4001..5000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "A value that uniquely identifies the policy
|
|
associated with this entry."
|
|
::= { rcIpPolicyRipAcceptEntry 1 }
|
|
|
|
rcIpPolicyRipAcceptName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "An administratively-assigned name for this policy."
|
|
::= { rcIpPolicyRipAcceptEntry 2 }
|
|
|
|
rcIpPolicyRipAcceptEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "It indicates whether this policy is enabled or not.
|
|
The policy should be applied only if it is set to 'true'."
|
|
DEFVAL { true }
|
|
::= { rcIpPolicyRipAcceptEntry 3 }
|
|
|
|
rcIpPolicyRipAcceptExactNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of 'exact' type entries
|
|
that are configured for this policy.
|
|
|
|
An entry with type 'exactNet' or 'rangeNet' represents
|
|
the network list. This indicates which networks will
|
|
match a particular accept policy.
|
|
|
|
An entry with a 'exact' type means to only match the
|
|
specific network advertisement (netaddr & mask).
|
|
|
|
An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0
|
|
means 'match the default route'."
|
|
::= { rcIpPolicyRipAcceptEntry 4 }
|
|
|
|
rcIpPolicyRipAcceptRangeNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more 'range' network entries
|
|
that are associated with this policy.
|
|
|
|
An entry with a 'range' type means to match any network
|
|
number that falls in the range indicated by the addr &
|
|
mask.
|
|
|
|
A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0
|
|
means 'match any route'.
|
|
|
|
A null list means 'match any route'."
|
|
::= { rcIpPolicyRipAcceptEntry 5 }
|
|
|
|
rcIpPolicyRipAcceptRipGatewayListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to identify the RIP-gatewayList in the
|
|
PolicyListTable that iares associated with this
|
|
policy. The list contains the addresses of one or more
|
|
routers that could send RIP updates to this router.
|
|
If a router address is included in this list, this
|
|
policy applies to RIP advertisements from that router.
|
|
|
|
If set to '0', this policy applies to RIP updates
|
|
from any router."
|
|
|
|
::= { rcIpPolicyRipAcceptEntry 6 }
|
|
|
|
rcIpPolicyRipAcceptRipInterfaceListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate ListId defined for RipInterfaceList
|
|
in the rcIpPolicyListTable that is assiciated
|
|
with this policy.
|
|
The list contains the addresses of one or more interfaces
|
|
on this router. If an interface address is included in
|
|
the list, this policy applies to RIP advertisements
|
|
received on that interface.
|
|
|
|
If set to '0', this policy applies to RIP updates
|
|
received on any interface."
|
|
|
|
::= { rcIpPolicyRipAcceptEntry 7 }
|
|
|
|
rcIpPolicyRipAcceptPrecedence OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Is used while comparing this policy rule with other
|
|
policy that a given route may match. A rule with a
|
|
higher precedence value will be chosen over one with
|
|
a smaller value. In the case of a tie, the PolicyId is
|
|
used (larger wins)."
|
|
::= { rcIpPolicyRipAcceptEntry 8 }
|
|
|
|
rcIpPolicyRipAcceptAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
accept(1),
|
|
ignore(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "It indicates whether the route should be acceptd
|
|
or not."
|
|
DEFVAL { accept }
|
|
::= { rcIpPolicyRipAcceptEntry 9 }
|
|
|
|
rcIpPolicyRipAcceptInjectNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the ListId of the InjectNetList
|
|
in the rcIpPolicyListTable entry that is assiciated
|
|
with for this policy. If teh action is 'accept' and if it
|
|
is desired to insert networks into the routing table that
|
|
differ from the actual advertised network. For instance,
|
|
if a number of networks in a certain range are learned
|
|
and an aggregate advertisement could be inserted instead
|
|
of the individual networks.
|
|
|
|
Upon receiving a route that matches this policy, all
|
|
networks in this list will be considered for inclusion
|
|
in the routing table. If the list is empty or if the
|
|
value of the ListId is '0' then the actual received
|
|
network is considered.
|
|
|
|
An encoding of 255.255.255.255/255.255.255.255 means
|
|
'match the actual received network.'. This allows
|
|
insertion of an aggregate or default along with the
|
|
actual netowrk."
|
|
::= { rcIpPolicyRipAcceptEntry 10 }
|
|
|
|
rcIpPolicyRipAcceptApplyMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "If the 'action' is set to 'accept' and the actual
|
|
received network will be considered, this is an
|
|
optional IP address mask that will be applied to the
|
|
network number from the RIP update. This is used to
|
|
override the interface's subnet mask in the presence
|
|
of networks with variable length subnet masks."
|
|
::= { rcIpPolicyRipAcceptEntry 11 }
|
|
|
|
rcIpPolicyRipAcceptRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpPolicyRipAcceptEntry 12 }
|
|
|
|
-- OSPF Accept policy table.
|
|
|
|
rcIpPolicyOspfAcceptTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpPolicyOspfAcceptTable."
|
|
::= { rcIpPolicy 13 }
|
|
|
|
rcIpPolicyOspfAcceptTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPolicyOspfAcceptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to store set of accept policies
|
|
configured for RIP routing protocol. The Number
|
|
of entries is given by rcIpPolicyNumRipPolicies."
|
|
::= { rcIpPolicy 14 }
|
|
|
|
rcIpPolicyOspfAcceptEntry OBJECT-TYPE
|
|
SYNTAX RcIpPolicyOspfAcceptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular accept policy."
|
|
INDEX { rcIpPolicyOspfAcceptId }
|
|
::= { rcIpPolicyOspfAcceptTable 1 }
|
|
|
|
RcIpPolicyOspfAcceptEntry ::= SEQUENCE {
|
|
rcIpPolicyOspfAcceptId INTEGER,
|
|
rcIpPolicyOspfAcceptName DisplayString,
|
|
rcIpPolicyOspfAcceptEnable TruthValue,
|
|
rcIpPolicyOspfAcceptExactNetListId INTEGER,
|
|
rcIpPolicyOspfAcceptRangeNetListId INTEGER,
|
|
rcIpPolicyOspfAcceptPrecedence INTEGER,
|
|
rcIpPolicyOspfAcceptAction INTEGER,
|
|
rcIpPolicyOspfAcceptInjectNetListId INTEGER,
|
|
rcIpPolicyOspfAcceptExtType INTEGER,
|
|
rcIpPolicyOspfAcceptRowStatus RowStatus
|
|
}
|
|
|
|
rcIpPolicyOspfAcceptId OBJECT-TYPE
|
|
SYNTAX INTEGER (6001..7000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "A value that uniquely identifies the policy
|
|
associated with this entry."
|
|
::= { rcIpPolicyOspfAcceptEntry 1 }
|
|
|
|
rcIpPolicyOspfAcceptName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "An administratively-assigned name for this policy."
|
|
::= { rcIpPolicyOspfAcceptEntry 2 }
|
|
|
|
rcIpPolicyOspfAcceptEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "It indicates whether this policy is enabled or not.
|
|
The policy should be applied only if it is set to 'true'."
|
|
DEFVAL { true }
|
|
::= { rcIpPolicyOspfAcceptEntry 3 }
|
|
|
|
rcIpPolicyOspfAcceptExactNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of 'exact' type entries
|
|
that are configured for this policy.
|
|
|
|
An entry with type 'exactNet' or 'rangeNet' represents
|
|
the network list. This indicates which networks will
|
|
match a particular accept policy.
|
|
|
|
An entry with a 'exact' type means to only match the
|
|
specific network advertisement (netaddr & mask).
|
|
|
|
An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0
|
|
means 'match the default route'."
|
|
::= { rcIpPolicyOspfAcceptEntry 4 }
|
|
|
|
rcIpPolicyOspfAcceptRangeNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more 'range' network entries
|
|
that are associated with this policy.
|
|
|
|
An entry with a 'range' type means to match any network
|
|
number that falls in the range indicated by the addr &
|
|
mask.
|
|
|
|
A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0
|
|
means 'match any route'.
|
|
|
|
A null list means 'match any route'."
|
|
::= { rcIpPolicyOspfAcceptEntry 5 }
|
|
|
|
rcIpPolicyOspfAcceptPrecedence OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Is used while comparing this policy rule with other
|
|
policy that a given route may match. A rule with a
|
|
higher precedence value will be chosen over one with
|
|
a smaller value. In the case of a tie, the PolicyId is
|
|
used (larger wins)."
|
|
::= { rcIpPolicyOspfAcceptEntry 6 }
|
|
|
|
rcIpPolicyOspfAcceptAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
accept(1),
|
|
ignore(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "It indicates whether the route should be acceptd
|
|
or not."
|
|
DEFVAL { accept }
|
|
::= { rcIpPolicyOspfAcceptEntry 7 }
|
|
|
|
rcIpPolicyOspfAcceptInjectNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the ListId of the InjectNetList
|
|
in the rcIpPolicyListTable entry that is assiciated
|
|
with for this policy. If teh action is 'accept' and if it
|
|
is desired to insert networks into the routing table that
|
|
differ from the actual advertised network. For instance,
|
|
if a number of networks in a certain range are learned
|
|
and an aggregate advertisement could be inserted instead
|
|
of the individual networks.
|
|
|
|
Upon receiving a route that matches this policy, all
|
|
networks in this list will be considered for inclusion
|
|
in the routing table. If the list is empty or if the
|
|
value of the ListId is '0' then the actual received
|
|
network is considered.
|
|
|
|
An encoding of 255.255.255.255/255.255.255.255 means
|
|
'match the actual received network.'. This allows
|
|
insertion of an aggregate or default along with the
|
|
actual netowrk."
|
|
::= { rcIpPolicyOspfAcceptEntry 8 }
|
|
|
|
rcIpPolicyOspfAcceptExtType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1),
|
|
type2(2),
|
|
any(3)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the ospf external type. This
|
|
parameter describes which types of OSPF ASE routes
|
|
match this policy.
|
|
'any' means 'match either ASE type 1 or 2'.
|
|
'type1' means 'match any external type 1'.
|
|
'type2' means 'match any external type 2"
|
|
::= { rcIpPolicyOspfAcceptEntry 9 }
|
|
|
|
rcIpPolicyOspfAcceptRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpPolicyOspfAcceptEntry 10 }
|
|
|
|
|
|
-- IP Policy Network List Table
|
|
|
|
rcIpPolicyNetListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpPolicyNetListTable."
|
|
::= { rcIpPolicy 15 }
|
|
|
|
rcIpPolicyNetListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPolicyNetListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to group rcIpPolicyAddrEntry(s)
|
|
into a list."
|
|
::= { rcIpPolicy 16 }
|
|
|
|
rcIpPolicyNetListEntry OBJECT-TYPE
|
|
SYNTAX RcIpPolicyNetListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Route entry attributes."
|
|
INDEX { rcIpPolicyNetListId }
|
|
::= { rcIpPolicyNetListTable 1 }
|
|
|
|
RcIpPolicyNetListEntry ::= SEQUENCE {
|
|
rcIpPolicyNetListId INTEGER,
|
|
rcIpPolicyNetListName DisplayString,
|
|
rcIpPolicyNetListIdListSize INTEGER,
|
|
rcIpPolicyNetListIdList OCTET STRING,
|
|
rcIpPolicyNetListPolicyIdListSize INTEGER,
|
|
rcIpPolicyNetListPolicyIdList OCTET STRING,
|
|
rcIpPolicyNetListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpPolicyNetListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "A value that uniquely identifies this list of
|
|
rcIpPolicyNetListEntry."
|
|
::= { rcIpPolicyNetListEntry 1 }
|
|
|
|
rcIpPolicyNetListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "An administratively-assigned name for this list."
|
|
::= { rcIpPolicyNetListEntry 3 }
|
|
|
|
rcIpPolicyNetListIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of rcIpPolicyNetEntry
|
|
id(s) in the rcIpPolicyNetListIdList variable."
|
|
::= { rcIpPolicyNetListEntry 4 }
|
|
|
|
rcIpPolicyNetListIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more NetListId that
|
|
are associated to this list. Each NetList identifier
|
|
is stored as two bytes in this array starting from
|
|
offset zero. Any unused bytes should be set to zero."
|
|
::= { rcIpPolicyNetListEntry 5 }
|
|
|
|
rcIpPolicyNetListPolicyIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of policy id(s) in the
|
|
Policy Id list. That are referring to this list."
|
|
::= { rcIpPolicyNetListEntry 6 }
|
|
|
|
rcIpPolicyNetListPolicyIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate zero or more policies that
|
|
are referring to this entry. Each policy identifier
|
|
is stored as two bytes in this array starting from
|
|
offset zero. Any unused bytes should be set to zero."
|
|
::= { rcIpPolicyNetListEntry 7 }
|
|
|
|
rcIpPolicyNetListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpPolicyNetListEntry 8 }
|
|
|
|
|
|
-- DVMRP Group Extension
|
|
|
|
rcIpDvmrp OBJECT IDENTIFIER ::= { rcIp 12 }
|
|
|
|
rcIpDvmrpGlobal OBJECT IDENTIFIER ::= { rcIpDvmrp 1 }
|
|
|
|
rcIpDvmrpGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The enabled status of IP Multicast Dvmrp routing
|
|
on this router."
|
|
::= { rcIpDvmrpGlobal 1 }
|
|
|
|
rcIpDvmrpGlobalUpdateInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (10..2000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Route upd interval"
|
|
DEFVAL { 60 }
|
|
::= { rcIpDvmrpGlobal 2 }
|
|
|
|
rcIpDvmrpGlobalTriggeredUpdateInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (5..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Trigger upd interval"
|
|
DEFVAL { 5 }
|
|
::= { rcIpDvmrpGlobal 3 }
|
|
|
|
rcIpDvmrpGlobalLeafTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (25..4000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Hold down timer for leaf"
|
|
DEFVAL { 200 }
|
|
::= { rcIpDvmrpGlobal 4 }
|
|
|
|
rcIpDvmrpGlobalNbrTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (35..8000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time to age out nbr"
|
|
DEFVAL { 140 }
|
|
::= { rcIpDvmrpGlobal 5 }
|
|
|
|
rcIpDvmrpGlobalNbrProbeInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (5..30)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "How often to send probe"
|
|
DEFVAL { 10 }
|
|
::= { rcIpDvmrpGlobal 6 }
|
|
|
|
rcIpDvmrpGlobalRouteExpireTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (20..4000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This parameter defines the route expiration timeout in seconds."
|
|
DEFVAL { 140 }
|
|
::= { rcIpDvmrpGlobal 7 }
|
|
|
|
rcIpDvmrpGlobalFwdCacheTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (10..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is the Forward Cache Value in second.
|
|
This value is going to be used in aging prune entries in seconds."
|
|
DEFVAL { 300 }
|
|
::= { rcIpDvmrpGlobal 8 }
|
|
|
|
rcIpDvmrpGlobalRouteDiscardTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (25..8000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This parameter defines time to garbage collect route in seconds."
|
|
DEFVAL { 260 }
|
|
::= { rcIpDvmrpGlobal 9 }
|
|
|
|
rcIpDvmrpGlobalRouteSwitchTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (20..2000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This parameter defines the route discard timeout in seconds."
|
|
DEFVAL { 140 }
|
|
::= { rcIpDvmrpGlobal 10 }
|
|
|
|
rcIpDvmrpGlobalGenerateTrap OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling the dvmrp to generate trap."
|
|
DEFVAL { disable }
|
|
::= { rcIpDvmrpGlobal 12 }
|
|
|
|
rcIpDvmrpGlobalGenerateLog OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling the dvmrp to generate log."
|
|
DEFVAL { disable }
|
|
::= { rcIpDvmrpGlobal 13 }
|
|
|
|
-- rcIpDvmrpTable
|
|
|
|
rcIpDvmrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpDvmrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Dvmrp Interface extension table. This table
|
|
augments the standard dvmrpInterfaceTable defined
|
|
in <draft-thaler-dvmrp-mib-09.txt>."
|
|
::= { rcIpDvmrp 2 }
|
|
|
|
rcIpDvmrpTableEntry OBJECT-TYPE
|
|
SYNTAX RcIpDvmrpTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing Proprietary DVMRP interface
|
|
information. An entry is automatically created
|
|
in this table when an ip address is configured on
|
|
an interface."
|
|
INDEX { rcIpDvmrpTableIfIndex }
|
|
::= { rcIpDvmrpTable 1 }
|
|
|
|
RcIpDvmrpTableEntry ::=
|
|
SEQUENCE {
|
|
rcIpDvmrpTableIfIndex InterfaceIndex,
|
|
rcIpDvmrpTableEnable TruthValue,
|
|
rcIpDvmrpTableMetric INTEGER,
|
|
rcIpDvmrpTableAdvSelf TruthValue,
|
|
rcIpDvmrpTableLocalAddr IpAddress,
|
|
rcIpDvmrpTableInPolicyName DisplayString,
|
|
rcIpDvmrpTableOutPolicyName DisplayString,
|
|
rcIpDvmrpTableDefRtLis TruthValue,
|
|
rcIpDvmrpTableDefRtSup TruthValue,
|
|
rcIpDvmrpTableDefRtMet Integer32,
|
|
rcIpDvmrpTableInterfaceType INTEGER
|
|
}
|
|
|
|
rcIpDvmrpTableIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable.
|
|
The interface identified by a particular value
|
|
of this index is the same interface as
|
|
identified by the same value of ifIndex."
|
|
::= { rcIpDvmrpTableEntry 1 }
|
|
|
|
rcIpDvmrpTableEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of DVMRP in the router. The
|
|
value 'enabled' denotes that the DVMRP is enableed on
|
|
the interface; 'disabled' disables it on the interface."
|
|
::= { rcIpDvmrpTableEntry 2 }
|
|
|
|
rcIpDvmrpTableMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..31)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Dvmrp cost on this interface."
|
|
::= { rcIpDvmrpTableEntry 3 }
|
|
|
|
rcIpDvmrpTableAdvSelf OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether the switch can
|
|
advertise this local network"
|
|
::= { rcIpDvmrpTableEntry 4 }
|
|
|
|
rcIpDvmrpTableLocalAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of this interface."
|
|
::= { rcIpDvmrpTableEntry 5 }
|
|
|
|
rcIpDvmrpTableInPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Dvmrp Accept Policy name that is configured on this interface."
|
|
::= { rcIpDvmrpTableEntry 6 }
|
|
|
|
rcIpDvmrpTableOutPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Dvmrp Announce Policy name that is configured on this interface."
|
|
::= { rcIpDvmrpTableEntry 7 }
|
|
|
|
rcIpDvmrpTableDefRtLis OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether the switch can learn
|
|
DVMRP default route over this interface"
|
|
::= { rcIpDvmrpTableEntry 8 }
|
|
|
|
rcIpDvmrpTableDefRtSup OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether the switch should
|
|
supply DVMRP default route over this interface"
|
|
::= { rcIpDvmrpTableEntry 9 }
|
|
|
|
rcIpDvmrpTableDefRtMet OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the cost of the DVMRP default
|
|
route that this interface generates and
|
|
supplies when it is configured to supply default route"
|
|
::= { rcIpDvmrpTableEntry 10 }
|
|
|
|
rcIpDvmrpTableInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Dvmrp Interface type"
|
|
DEFVAL { active }
|
|
::= { rcIpDvmrpTableEntry 11 }
|
|
|
|
-- Ip UDP Protocol Table
|
|
|
|
rcIpUdp OBJECT IDENTIFIER ::= { rcIp 13 }
|
|
|
|
rcIpUdpProtocolTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpUdpProtocolTable."
|
|
::= { rcIpUdp 1 }
|
|
|
|
rcIpUdpProtocolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpUdpProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "list of UDP protocols. Used to determine whether to
|
|
forward the UDP broadcast packet or not."
|
|
::= { rcIpUdp 2 }
|
|
|
|
rcIpUdpProtocolEntry OBJECT-TYPE
|
|
SYNTAX RcIpUdpProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to include a particular UDP port in the table.
|
|
An entry in this table indicates that the box might do
|
|
forwarding of UDP broadcast packets if there is a
|
|
matching entry for this packet in the
|
|
rcIpUdpPortFwdTable."
|
|
INDEX { rcIpUdpProtocolPortNumber }
|
|
::= { rcIpUdpProtocolTable 1 }
|
|
|
|
RcIpUdpProtocolEntry ::=
|
|
SEQUENCE {
|
|
rcIpUdpProtocolPortNumber INTEGER,
|
|
rcIpUdpProtocolName DisplayString,
|
|
rcIpUdpProtocolRowStatus RowStatus
|
|
}
|
|
|
|
rcIpUdpProtocolPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "well-known UDP Port number. Pre-assigned port
|
|
number for this protocol. Port used by the
|
|
server process as its contact port. It cannot
|
|
be BOOTP/DHCP port#s 67, 68."
|
|
::= { rcIpUdpProtocolEntry 1 }
|
|
|
|
rcIpUdpProtocolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the name of the protocol
|
|
that is running on top of UDP protocol.
|
|
cannot change the name once created. This
|
|
should be set while creating the entry."
|
|
::= { rcIpUdpProtocolEntry 2 }
|
|
|
|
rcIpUdpProtocolRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Rowstatus of this entry."
|
|
::= { rcIpUdpProtocolEntry 3 }
|
|
|
|
|
|
-- Ip Udp Port Forward Table
|
|
|
|
rcIpUdpPortFwdTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpUdpPortFwdTable."
|
|
::= { rcIpUdp 3 }
|
|
|
|
rcIpUdpPortFwdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpUdpPortFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Udp forward entry table."
|
|
::= { rcIpUdp 4 }
|
|
|
|
rcIpUdpPortFwdEntry OBJECT-TYPE
|
|
SYNTAX RcIpUdpPortFwdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry is configured to specify forwarding policy
|
|
parameters."
|
|
INDEX { rcIpUdpPortFwdDestPort,
|
|
rcIpUdpPortFwdDestAddr}
|
|
::= { rcIpUdpPortFwdTable 1 }
|
|
|
|
RcIpUdpPortFwdEntry ::=
|
|
SEQUENCE {
|
|
rcIpUdpPortFwdDestPort INTEGER,
|
|
rcIpUdpPortFwdDestAddr IpAddress,
|
|
rcIpUdpPortFwdId Integer32,
|
|
rcIpUdpPortFwdFwdListIdListSize INTEGER,
|
|
rcIpUdpPortFwdFwdListIdList IdList,
|
|
rcIpUdpPortFwdNumFwdPackets Counter32,
|
|
rcIpUdpPortFwdNumDropPacketsTtlExpired Counter32,
|
|
rcIpUdpPortFwdNumDropPacketsDestUnreach Counter32,
|
|
rcIpUdpPortFwdRowStatus RowStatus
|
|
}
|
|
|
|
rcIpUdpPortFwdDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The well-known port number defined for UDP/TCP
|
|
depending on the value of IpProtoType field in this
|
|
entry. This port number has to be defined in the
|
|
rcIpUdpProtoTable. In order to select this policy the
|
|
destination port number has to match the DestPort
|
|
value."
|
|
::= { rcIpUdpPortFwdEntry 1 }
|
|
|
|
rcIpUdpPortFwdDestAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Destination IP address. The IP addres to which the
|
|
UDP/TCP broadcast should be forwarded. This IP address
|
|
can be any IP server address or subnet broadcast
|
|
address. If the IP address is one of the routable
|
|
interface's address on the router, the frame will be
|
|
rebroadcast out as a limited broadcast. If the Ip
|
|
address is that of a server then the received
|
|
broadcast packet will be sent as a unicast packet to
|
|
this address."
|
|
::= { rcIpUdpPortFwdEntry 2 }
|
|
|
|
rcIpUdpPortFwdId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identifier of this entry. Used internally to identify
|
|
this entry."
|
|
::= { rcIpUdpPortFwdEntry 3 }
|
|
|
|
rcIpUdpPortFwdFwdListIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of id(s) in the
|
|
rcIpUdpPortFwdListId variable."
|
|
::= { rcIpUdpPortFwdEntry 4 }
|
|
|
|
rcIpUdpPortFwdFwdListIdList OBJECT-TYPE
|
|
SYNTAX IdList(SIZE(64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate zero or more rcIpUdpPortFwdListEntry(s)
|
|
that are referring to this entry. Each list-id identifier
|
|
is stored as two bytes in this array starting from
|
|
offset zero. Any unused bytes should be set to zero."
|
|
::= { rcIpUdpPortFwdEntry 5 }
|
|
|
|
rcIpUdpPortFwdNumFwdPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of UDP/TCP broadcast packets forwarded
|
|
using this policy."
|
|
::= { rcIpUdpPortFwdEntry 6 }
|
|
|
|
rcIpUdpPortFwdNumDropPacketsTtlExpired OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of UDP/TCP broadcast packets dropped
|
|
because the TTL has expired."
|
|
::= { rcIpUdpPortFwdEntry 7 }
|
|
|
|
rcIpUdpPortFwdNumDropPacketsDestUnreach OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of UDP/TCP broadcast packets dropped
|
|
because the rcIpUdpPortFwdDestAddr specified in
|
|
this policy was unreachable."
|
|
::= { rcIpUdpPortFwdEntry 8 }
|
|
|
|
rcIpUdpPortFwdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpUdpPortFwdEntry 9 }
|
|
|
|
-- Udp Port Fwd List Table
|
|
|
|
rcIpUdpPortFwdListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpUdpPortFwdListTable."
|
|
::= { rcIpUdp 5 }
|
|
|
|
rcIpUdpPortFwdListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpUdpPortFwdListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to group rcIpUdpPortFwdEntry(s)
|
|
into a list."
|
|
::= { rcIpUdp 6 }
|
|
|
|
rcIpUdpPortFwdListEntry OBJECT-TYPE
|
|
SYNTAX RcIpUdpPortFwdListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route entry attributes."
|
|
INDEX { rcIpUdpPortFwdListId }
|
|
::= { rcIpUdpPortFwdListTable 1 }
|
|
|
|
RcIpUdpPortFwdListEntry ::= SEQUENCE {
|
|
rcIpUdpPortFwdListId INTEGER,
|
|
rcIpUdpPortFwdListName DisplayString,
|
|
rcIpUdpPortFwdListFwdIdListSize INTEGER,
|
|
rcIpUdpPortFwdListFwdIdList OCTET STRING,
|
|
rcIpUdpPortFwdListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpUdpPortFwdListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies this list of
|
|
rcIpUdpPortFwdListEntry."
|
|
::= { rcIpUdpPortFwdListEntry 1 }
|
|
|
|
rcIpUdpPortFwdListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this list."
|
|
::= { rcIpUdpPortFwdListEntry 3 }
|
|
|
|
rcIpUdpPortFwdListFwdIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of rcIpUdpPortFwdNetEntry
|
|
id(s) in the rcIpUdpPortFwdListIdList variable."
|
|
::= { rcIpUdpPortFwdListEntry 4 }
|
|
|
|
rcIpUdpPortFwdListFwdIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate zero or more UdpPortFwd entries
|
|
that are associated to this list. Each entry identifier
|
|
is stored as two bytes in this array starting from
|
|
offset zero. Any unused bytes should be set to zero."
|
|
::= { rcIpUdpPortFwdListEntry 5 }
|
|
|
|
rcIpUdpPortFwdListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpUdpPortFwdListEntry 6 }
|
|
|
|
|
|
-- Ip Config Broadcast Forwarding Table
|
|
|
|
rcIpUdpConfBroadcastIntfTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcIpUdpBroadcastIntfTable."
|
|
::= { rcIpUdp 7 }
|
|
|
|
rcIpUdpConfBroadcastIntfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpUdpConfBroadcastIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP broadcast forward configuration table"
|
|
::= { rcIpUdp 8 }
|
|
|
|
rcIpUdpConfBroadcastIntfEntry OBJECT-TYPE
|
|
SYNTAX RcIpUdpConfBroadcastIntfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to configure UDP broadcast forward on a
|
|
particular interface."
|
|
INDEX { rcIpUdpConfBroadcastIntfLocalIfAddr }
|
|
::= { rcIpUdpConfBroadcastIntfTable 1 }
|
|
|
|
RcIpUdpConfBroadcastIntfEntry ::=
|
|
SEQUENCE {
|
|
rcIpUdpConfBroadcastIntfLocalIfAddr IpAddress,
|
|
rcIpUdpConfBroadcastIntfUdpPortFwdListId INTEGER,
|
|
rcIpUdpConfBroadcastIntfMaxTtl INTEGER,
|
|
rcIpUdpConfBroadcastIntfNumRxPkts Counter32,
|
|
rcIpUdpConfBroadcastIntfNumFwdPkts Counter32,
|
|
rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired Counter32,
|
|
rcIpUdpConfBroadcastIntfNumDropPktsDestUnreach Counter32,
|
|
rcIpUdpConfBroadcastIntfNumDropPktsUnknownPort Counter32,
|
|
rcIpUdpConfBroadcastIntfRowStatus RowStatus,
|
|
rcIpUdpConfBroadcastIntfBroadCastMask IpAddress
|
|
|
|
}
|
|
|
|
rcIpUdpConfBroadcastIntfLocalIfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The ip address of the local interface that is
|
|
partipating in the forwarding UDP broadcast packets."
|
|
::= { rcIpUdpConfBroadcastIntfEntry 1 }
|
|
|
|
rcIpUdpConfBroadcastIntfUdpPortFwdListId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number UDP ports that this
|
|
interface is configured to forward.
|
|
|
|
A value of '0' indicates that this interface will not
|
|
forward any UDP broadcast packets. This is a required
|
|
field to create an entry."
|
|
::= { rcIpUdpConfBroadcastIntfEntry 2 }
|
|
|
|
rcIpUdpConfBroadcastIntfMaxTtl OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the maximum number of hops an
|
|
IP broadcast packet can take from the source
|
|
device to the destination device."
|
|
DEFVAL { 4 }
|
|
::= { rcIpUdpConfBroadcastIntfEntry 3 }
|
|
|
|
rcIpUdpConfBroadcastIntfNumRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of UDP/TCP broadcast packets
|
|
received by this local interface."
|
|
::= { rcIpUdpConfBroadcastIntfEntry 4 }
|
|
|
|
rcIpUdpConfBroadcastIntfNumFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of UDP/TCP broadcast packets
|
|
forwarded."
|
|
::= { rcIpUdpConfBroadcastIntfEntry 5 }
|
|
|
|
rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of UDP/TCP broadcast packets
|
|
dropped because the TTL has expired."
|
|
::= { rcIpUdpConfBroadcastIntfEntry 6 }
|
|
|
|
rcIpUdpConfBroadcastIntfNumDropPktsDestUnreach OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of UDP broadcast packets
|
|
dropped because the destination was unreachable."
|
|
::= { rcIpUdpConfBroadcastIntfEntry 7 }
|
|
|
|
rcIpUdpConfBroadcastIntfNumDropPktsUnknownPort OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of UDP/TCP broadcast packets
|
|
dropped because the destination port/protocol
|
|
specified has no matching forwarding policy."
|
|
::= { rcIpUdpConfBroadcastIntfEntry 8 }
|
|
|
|
rcIpUdpConfBroadcastIntfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Entry row status."
|
|
::= { rcIpUdpConfBroadcastIntfEntry 9 }
|
|
|
|
rcIpUdpConfBroadcastIntfBroadCastMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The subnet mask of the local interface that is
|
|
used for broadcasting the UDP broadcast packets."
|
|
::= { rcIpUdpConfBroadcastIntfEntry 10 }
|
|
|
|
--IP ToS Rule
|
|
rcIpTosRule OBJECT IDENTIFIER ::= { rcIp 14} --excluded
|
|
|
|
rcIpTosRuleAndMask OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "And Mask. The Ip ToS byte in the Ip header
|
|
is logically ANDed with this value, and then logically
|
|
ORed with the one of the OrRules below."
|
|
::= { rcIpTosRule 1 }
|
|
|
|
rcIpTosRuleOrRule1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Quid/Gid Or rule #1. The Ip ToS byte in the Ip header
|
|
is logically ORed with this value."
|
|
::= { rcIpTosRule 2 }
|
|
|
|
rcIpTosRuleOrRule2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Quid/Gid Or rule #2. The Ip ToS byte in the Ip header
|
|
is logically ORed with this value."
|
|
::= { rcIpTosRule 3 }
|
|
|
|
rcIpTosRuleOrRule3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Quid/Gid Or rule #3. The Ip ToS byte in the Ip header
|
|
is logically ORed with this value."
|
|
::= { rcIpTosRule 4 }
|
|
|
|
rcIpTosRuleTosPriorityEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable Tos priority."
|
|
::= { rcIpTosRule 5 }
|
|
|
|
rcIpTosRuleTosThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "tos threshold"
|
|
::= { rcIpTosRule 6 }
|
|
|
|
--IP Static Route (excluded)
|
|
rcIpStaticRoute OBJECT IDENTIFIER ::= { rcIp 15}
|
|
|
|
rcIpStaticRouteTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "size of Ip Static Route Table."
|
|
::= { rcIpStaticRoute 1 }
|
|
|
|
rcIpStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to add static IP routes to
|
|
the device. Routes added into this table will
|
|
automatically show-up in the 'rcIpRouteTable'
|
|
when the device is actively using the route
|
|
to forward IP traffic."
|
|
::= { rcIpStaticRoute 2 }
|
|
|
|
rcIpStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX RcIpStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A static route to a particular destination."
|
|
INDEX { rcIpStaticRouteDest,
|
|
rcIpStaticRouteMask,
|
|
rcIpStaticRouteNextHop }
|
|
::= { rcIpStaticRouteTable 1 }
|
|
|
|
RcIpStaticRouteEntry ::=
|
|
SEQUENCE {
|
|
rcIpStaticRouteDest IpAddress,
|
|
rcIpStaticRouteMask IpAddress,
|
|
rcIpStaticRouteNextHop IpAddress,
|
|
rcIpStaticRouteMetric INTEGER,
|
|
rcIpStaticRouteIfIndex InterfaceIndex,
|
|
rcIpStaticRoutePreference INTEGER,
|
|
rcIpStaticRouteEnable TruthValue,
|
|
rcIpStaticRouteStatus INTEGER,
|
|
rcIpStaticRouteRowStatus RowStatus,
|
|
rcIpStaticRouteLocalNextHop TruthValue
|
|
}
|
|
|
|
rcIpStaticRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The destination IP address of this route. An
|
|
entry with a value of 0.0.0.0 is considered a
|
|
default route. Multiple routes to a single
|
|
destination can appear in the table, but access to
|
|
such multiple entries is dependent on the table-
|
|
access mechanisms defined by the network
|
|
management protocol in use."
|
|
::= { rcIpStaticRouteEntry 1 }
|
|
|
|
rcIpStaticRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the mask to be logical-ANDed with the
|
|
destination address before being compared to the
|
|
value in the rcIpRouteDest field. For those systems
|
|
that do not support arbitrary subnet masks, an
|
|
agent constructs the value of the rcIpRouteMask by
|
|
determining whether the value of the correspondent
|
|
rcIpRouteDest field belong to a class-A, B, or C
|
|
network, and then using one of:
|
|
|
|
mask network
|
|
255.0.0.0 class-A
|
|
255.255.0.0 class-B
|
|
255.255.255.0 class-C
|
|
|
|
If the value of the rcIpRouteDest is 0.0.0.0 (a
|
|
default route), then the mask value is also
|
|
0.0.0.0. It should be noted that all IP routing
|
|
subsystems implicitly use this mechanism."
|
|
::= { rcIpStaticRouteEntry 2 }
|
|
|
|
rcIpStaticRouteNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the next hop of this route.
|
|
(In the case of a route bound to an interface
|
|
which is realized via a broadcast media, the value
|
|
of this field is the agent's IP address on that
|
|
interface)."
|
|
::= { rcIpStaticRouteEntry 3 }
|
|
|
|
rcIpStaticRouteMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The primary routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
rcIpRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
DEFVAL { 1 }
|
|
::= { rcIpStaticRouteEntry 4 }
|
|
|
|
rcIpStaticRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
local interface through which the next hop of this
|
|
route should be reached. The interface identified
|
|
by a particular value of this index is the same
|
|
interface as identified by the same value of
|
|
ifIndex."
|
|
::= { rcIpStaticRouteEntry 5 }
|
|
|
|
rcIpStaticRoutePreference OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the route preference of this
|
|
entry. If there are more than one route that can
|
|
be used to forward IP traffic, the route that has
|
|
a highest preference will be used instead of a
|
|
lower preference one. The higher the number, the higher the preference."
|
|
::= { rcIpStaticRouteEntry 6 }
|
|
|
|
rcIpStaticRouteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable this entry."
|
|
DEFVAL { true }
|
|
::= { rcIpStaticRouteEntry 7 }
|
|
|
|
rcIpStaticRouteStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(0),
|
|
active(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current status of
|
|
this entry."
|
|
DEFVAL { active }
|
|
::= { rcIpStaticRouteEntry 8 }
|
|
|
|
rcIpStaticRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcIpStaticRouteEntry 9 }
|
|
|
|
rcIpStaticRouteLocalNextHop OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable this entry. True indicate that the
|
|
static route becomes active only if switch has a local route
|
|
to the network. False indicates that the static route becomes
|
|
active if switch has a local route or dynamic route."
|
|
DEFVAL { true }
|
|
::= { rcIpStaticRouteEntry 10 }
|
|
|
|
rcIpStaticRouteBfdTableSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "size of IP static route BFD table."
|
|
::= { rcIpStaticRoute 3 }
|
|
|
|
rcIpStaticRouteBfdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpStaticRouteBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to hold next hop addresses on which BFD is enabled."
|
|
::= { rcIpStaticRoute 4 }
|
|
|
|
rcIpStaticRouteBfdEntry OBJECT-TYPE
|
|
SYNTAX RcIpStaticRouteBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An IP address of the next hop of the BFD session."
|
|
INDEX {rcIpStaticRouteBfdNextHop}
|
|
::= { rcIpStaticRouteBfdTable 1 }
|
|
|
|
RcIpStaticRouteBfdEntry ::=
|
|
SEQUENCE {
|
|
rcIpStaticRouteBfdNextHop IpAddress,
|
|
rcIpStaticRouteBfdRowStatus RowStatus
|
|
}
|
|
|
|
rcIpStaticRouteBfdNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the next hop of the BFD session."
|
|
::= { rcIpStaticRouteBfdEntry 1 }
|
|
|
|
rcIpStaticRouteBfdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcIpStaticRouteBfdEntry 2 }
|
|
|
|
|
|
--IP PIM
|
|
|
|
rcIpPim OBJECT IDENTIFIER ::= { rcIp 16 }
|
|
|
|
rcIpPimGlobal OBJECT IDENTIFIER ::= { rcIpPim 1}
|
|
|
|
rcIpPimGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable feature"
|
|
::= { rcIpPimGlobal 1 }
|
|
|
|
rcIpPimGlobalMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dm(1),
|
|
sm(2),
|
|
smdm(3),
|
|
ssm(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpPimGlobal 2 }
|
|
|
|
rcIpPimGlobalMbr OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable/disable pim multicast border router feature"
|
|
::= { rcIpPimGlobal 3 }
|
|
|
|
rcIpPimGlobalRegisterSuppTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (6..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Each source's DR maintains, per (S,G), a Register- Suppression-timer in seconds. The Register-
|
|
Suppression-timer is started by the Register-Stop message; upon expiration, the source's DR resumes sending data packets to the RP, encapsulated in
|
|
the Register message. Value must be between 10 and 65535."
|
|
DEFVAL { 60 }
|
|
::= { rcIpPimGlobal 4 }
|
|
|
|
rcIpPimGlobalInterfaceTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpPimGlobal 5 }
|
|
|
|
rcIpPimGlobalUniRouteChgTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (2..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This timer allows a better tuning on how fast the
|
|
routing information is going to get updated from
|
|
RTM (the frequency at which the RTM is polled for
|
|
routing information updates)."
|
|
DEFVAL { 5 }
|
|
::= { rcIpPimGlobal 6 }
|
|
|
|
rcIpPimGlobalDiscardDataTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (5..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This timer is used to discard data until the Join
|
|
is received from the RP. A ipmc discard record is
|
|
created and deleted once the timer expires and/or
|
|
when a Join is received."
|
|
DEFVAL { 60 }
|
|
::= { rcIpPimGlobal 7 }
|
|
|
|
rcIpPimGlobalCRPADVTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (5..26214)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Routers configured as candidate RPs use this timer
|
|
to periodically send C-RP-Adv messages. Upon expiry,
|
|
a C-RP-Adv message is sent to the elected BSR."
|
|
DEFVAL { 60 }
|
|
::= { rcIpPimGlobal 8 }
|
|
|
|
rcIpPimGlobalBootStrapPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (5..32757)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "At the elected BSR, this is the interval between
|
|
originating Bootstrap messages."
|
|
DEFVAL { 60 }
|
|
::= { rcIpPimGlobal 9 }
|
|
|
|
rcIpPimGlobalStaticRP OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Static RP feature."
|
|
DEFVAL { false }
|
|
::= { rcIpPimGlobal 10 }
|
|
|
|
rcIpPimGlobalActivityChkInterval OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
intv15(15),
|
|
intv30(30),
|
|
intv42(42),
|
|
intv70(70),
|
|
intv105(105),
|
|
intv210(210)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Activity check interval for polling PIM SG traffic
|
|
activity information."
|
|
DEFVAL { intv210 }
|
|
::= { rcIpPimGlobal 11 }
|
|
|
|
rcIpPimGlobalFwdCacheTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (10..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PIM forward cache expiry value in seconds.This
|
|
value is going to be used in aging PIM mroutes
|
|
in seconds."
|
|
DEFVAL { 210 }
|
|
::= { rcIpPimGlobal 12 }
|
|
|
|
rcIpPimGlobalFastJoinPrune OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Pim Fast Join Prune."
|
|
DEFVAL { disable }
|
|
::= { rcIpPimGlobal 13 }
|
|
|
|
rcIpPimGlobalStaticRPSpecificRt OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Static RP specific route feature."
|
|
DEFVAL { false }
|
|
::= { rcIpPimGlobal 14 }
|
|
|
|
rcIpPimGlobalOperEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether PIM is operationally enabled."
|
|
::= { rcIpPimGlobal 15 }
|
|
|
|
rcIpPimGlobalPruneDelayControl OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable prune-delay-control feature"
|
|
DEFVAL { false }
|
|
::= { rcIpPimGlobal 16 }
|
|
|
|
rcIpPimTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPimEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Pim table"
|
|
::= { rcIpPim 2 }
|
|
|
|
rcIpPimEntry OBJECT-TYPE
|
|
SYNTAX RcIpPimEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Pim Table."
|
|
INDEX { rcIpPimIfIndex }
|
|
::= { rcIpPimTable 1 }
|
|
|
|
RcIpPimEntry ::=
|
|
SEQUENCE {
|
|
rcIpPimIfIndex InterfaceIndex,
|
|
rcIpPimEnable TruthValue,
|
|
rcIpPimMode INTEGER,
|
|
rcIpPimHelloInterval INTEGER,
|
|
rcIpPimJoinPruneInterval INTEGER,
|
|
rcIpPimCBSRPreference INTEGER,
|
|
rcIpPimIntfType INTEGER,
|
|
rcIpPimPruneDelay Integer32
|
|
}
|
|
|
|
rcIpPimIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port"
|
|
::= { rcIpPimEntry 1 }
|
|
|
|
rcIpPimEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable interface"
|
|
::= { rcIpPimEntry 2 }
|
|
|
|
rcIpPimMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dense(1),
|
|
sparse(2),
|
|
sparseDense(3),
|
|
ssm(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpPimEntry 3 }
|
|
|
|
rcIpPimHelloInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(0..18724)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "frq. at which hello sent."
|
|
DEFVAL { 30 }
|
|
::= { rcIpPimEntry 4 }
|
|
|
|
rcIpPimJoinPruneInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(1..18724)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpPimEntry 5 }
|
|
|
|
rcIpPimCBSRPreference OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { -1 }
|
|
::= { rcIpPimEntry 6 }
|
|
|
|
rcIpPimIntfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Pim interface type."
|
|
DEFVAL { active }
|
|
::= { rcIpPimEntry 7 }
|
|
|
|
rcIpPimPruneDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Pim Prune Delay."
|
|
DEFVAL { 1 }
|
|
::= { rcIpPimEntry 8 }
|
|
|
|
-- Pim Interface Table Extension
|
|
|
|
rcIpPimInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Pim table"
|
|
::= { rcIpPim 3 }
|
|
|
|
rcIpPimInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpPimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Pim Interface Table."
|
|
INDEX { rcIpPimInterfaceIfIndex }
|
|
::= { rcIpPimInterfaceTable 1 }
|
|
|
|
RcIpPimInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpPimInterfaceIfIndex InterfaceIndex,
|
|
rcIpPimInterfaceOperState INTEGER,
|
|
rcIpPimInterfaceType INTEGER,
|
|
rcIpPimInterfaceCBSREnable TruthValue
|
|
}
|
|
|
|
rcIpPimInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port"
|
|
::= { rcIpPimInterfaceEntry 1 }
|
|
|
|
rcIpPimInterfaceOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational state of this PIM interface.
|
|
This object is deprecated in favor of ifOperStatus."
|
|
::= { rcIpPimInterfaceEntry 2 }
|
|
|
|
rcIpPimInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Pim interface type."
|
|
DEFVAL { active }
|
|
::= { rcIpPimInterfaceEntry 3 }
|
|
|
|
|
|
rcIpPimInterfaceCBSREnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable Candidate BSR on pim local interface."
|
|
DEFVAL { false }
|
|
::= { rcIpPimInterfaceEntry 4 }
|
|
|
|
rcIpPimStaticRPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPimStaticRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table lists all the RPs configured statically for
|
|
various IP multicast groups."
|
|
::= { rcIpPim 4 }
|
|
|
|
rcIpPimStaticRPEntry OBJECT-TYPE
|
|
SYNTAX RcIpPimStaticRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) in the rcIpPimStaticRPTable."
|
|
INDEX { rcIpPimStaticRPGroupAddress,
|
|
rcIpPimStaticRPGroupMask,
|
|
rcIpPimStaticRPAddress }
|
|
::= { rcIpPimStaticRPTable 1 }
|
|
|
|
RcIpPimStaticRPEntry ::= SEQUENCE {
|
|
rcIpPimStaticRPGroupAddress IpAddress,
|
|
rcIpPimStaticRPGroupMask IpAddress,
|
|
rcIpPimStaticRPAddress IpAddress,
|
|
rcIpPimStaticRPRowStatus RowStatus,
|
|
rcIpPimStaticRPStatus INTEGER
|
|
}
|
|
|
|
rcIpPimStaticRPGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP multicast group address which, when combined with
|
|
rcIpPimStaticRPGroupMask, identifies a group prefix for
|
|
which rcIpPimStaticRPAddress is a static-RP."
|
|
::= { rcIpPimStaticRPEntry 1 }
|
|
|
|
rcIpPimStaticRPGroupMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The multicast group address mask which, when combined
|
|
with rcIpPimStaticRPGroupAddress, identifies a group
|
|
prefix for which rcIpPimStaticRPAddress is a static-RP."
|
|
::= { rcIpPimStaticRPEntry 2 }
|
|
|
|
rcIpPimStaticRPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The (unicast) address of the static-RP."
|
|
::= { rcIpPimStaticRPEntry 3 }
|
|
|
|
rcIpPimStaticRPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { rcIpPimStaticRPEntry 4 }
|
|
|
|
rcIpPimStaticRPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of StaticRP."
|
|
::= { rcIpPimStaticRPEntry 5 }
|
|
|
|
rcIpPimCurrBsr OBJECT IDENTIFIER ::= { rcIpPim 5 }
|
|
|
|
rcIpPimCurrBsrAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current BSR address"
|
|
::= { rcIpPimCurrBsr 1 }
|
|
|
|
rcIpPimCurrBsrFragmentTag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current BSR Fragment Tag"
|
|
DEFVAL { -1 }
|
|
::= { rcIpPimCurrBsr 2 }
|
|
|
|
rcIpPimCurrBsrHashMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current BSR Hash Mask value"
|
|
::= { rcIpPimCurrBsr 3 }
|
|
|
|
rcIpPimCurrBsrPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current BSR Priority"
|
|
DEFVAL { 0 }
|
|
::= { rcIpPimCurrBsr 4 }
|
|
|
|
rcIpPimCurrBsrBootStrapTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current BSR Boot Strap Timer"
|
|
::= { rcIpPimCurrBsr 5 }
|
|
|
|
rcIpPimVirtualNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPimVirtualNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table listing the router's virtual PIM neighbors"
|
|
::= { rcIpPim 6 }
|
|
|
|
rcIpPimVirtualNbrEntry OBJECT-TYPE
|
|
SYNTAX RcIpPimVirtualNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the virtual PIM neighbors' table."
|
|
INDEX { rcIpPimVirtualNbrAddress }
|
|
::= { rcIpPimVirtualNbrTable 1 }
|
|
|
|
RcIpPimVirtualNbrEntry ::= SEQUENCE {
|
|
rcIpPimVirtualNbrAddress IpAddress,
|
|
rcIpPimVirtualNbrIfIndex InterfaceIndex,
|
|
rcIpPimVirtualNbrRowStatus RowStatus
|
|
}
|
|
|
|
rcIpPimVirtualNbrAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the virtual PIM neighbor for which this entry
|
|
contains information."
|
|
::= { rcIpPimVirtualNbrEntry 1 }
|
|
|
|
rcIpPimVirtualNbrIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the PIM interface in which this virtual
|
|
neighbor is created. This value is mandatory while trying to create
|
|
a virtual PIM neighbor."
|
|
::= { rcIpPimVirtualNbrEntry 2 }
|
|
|
|
rcIpPimVirtualNbrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create/delete an entry in the virtual PIM neighbors'
|
|
table."
|
|
::= { rcIpPimVirtualNbrEntry 3 }
|
|
|
|
rcIpPimActiveRPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPimActiveRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table lists the RPs being used for the active IP multicast groups."
|
|
::= { rcIpPim 7 }
|
|
|
|
rcIpPimActiveRPEntry OBJECT-TYPE
|
|
SYNTAX RcIpPimActiveRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the rcIpPimActiveRPTable."
|
|
INDEX { rcIpPimActiveRPGroupAddress }
|
|
::= { rcIpPimActiveRPTable 1 }
|
|
|
|
RcIpPimActiveRPEntry ::= SEQUENCE {
|
|
rcIpPimActiveRPGroupAddress IpAddress,
|
|
rcIpPimActiveRPAddress IpAddress,
|
|
rcIpPimActiveRPPriority INTEGER
|
|
}
|
|
|
|
rcIpPimActiveRPGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The active IP multicast group address"
|
|
::= { rcIpPimActiveRPEntry 1 }
|
|
|
|
rcIpPimActiveRPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address of the RP for the active multicast group"
|
|
::= { rcIpPimActiveRPEntry 2 }
|
|
|
|
rcIpPimActiveRPPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The priority of the RP."
|
|
::= { rcIpPimActiveRPEntry 3 }
|
|
|
|
--IP Multicast Arp table
|
|
|
|
rcIpMulticastArpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMulticastArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Multicast Arp table"
|
|
::= { rcIp 17 }
|
|
|
|
rcIpMulticastArpEntry OBJECT-TYPE
|
|
SYNTAX RcIpMulticastArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Multicast Arp Table."
|
|
INDEX { rcIpMulticastArpVlanId,
|
|
rcIpMulticastArpMacAddress,
|
|
rcIpMulticastArpIpAddress }
|
|
::= { rcIpMulticastArpTable 1 }
|
|
|
|
RcIpMulticastArpEntry ::=
|
|
SEQUENCE {
|
|
rcIpMulticastArpVlanId Integer32,
|
|
rcIpMulticastArpMacAddress MacAddress,
|
|
rcIpMulticastArpIpAddress IpAddress,
|
|
rcIpMulticastArpPorts PortSet,
|
|
rcIpMulticastArpNumMltIds Integer32,
|
|
rcIpMulticastArpMltIds IdList,
|
|
rcIpMulticastArpRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMulticastArpVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "vlan id"
|
|
::= { rcIpMulticastArpEntry 1 }
|
|
|
|
rcIpMulticastArpMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "multicast mac address"
|
|
::= { rcIpMulticastArpEntry 2 }
|
|
|
|
rcIpMulticastArpIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "multicast ip address"
|
|
::= { rcIpMulticastArpEntry 3 }
|
|
|
|
rcIpMulticastArpPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ports within a particular vlan"
|
|
::= { rcIpMulticastArpEntry 4 }
|
|
|
|
rcIpMulticastArpNumMltIds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of mlt ids"
|
|
::= { rcIpMulticastArpEntry 5 }
|
|
|
|
rcIpMulticastArpMltIds OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "mlt id"
|
|
::= { rcIpMulticastArpEntry 6 }
|
|
|
|
rcIpMulticastArpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rcIpMulticastArpEntry 7 }
|
|
|
|
--IP Multicast Table
|
|
|
|
rcIpMulticastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Ip multicast table."
|
|
::= { rcIp 18 }
|
|
|
|
rcIpMulticastEntry OBJECT-TYPE
|
|
SYNTAX RcIpMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing Proprietary Ip Multicast information."
|
|
INDEX { rcIpMulticastIfIndex }
|
|
::= { rcIpMulticastTable 1 }
|
|
|
|
RcIpMulticastEntry ::=
|
|
SEQUENCE {
|
|
rcIpMulticastIfIndex InterfaceIndex,
|
|
rcIpMulticastMulticastIp IpAddress
|
|
}
|
|
|
|
rcIpMulticastIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "IfIndex."
|
|
::= { rcIpMulticastEntry 1 }
|
|
|
|
rcIpMulticastMulticastIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "IP Address on this IfIndex
|
|
to be used for all Multicast
|
|
protocols running on this
|
|
interface."
|
|
::= { rcIpMulticastEntry 2 }
|
|
|
|
-- SPB PIM Gateway
|
|
|
|
rcIpSpbPimGw OBJECT IDENTIFIER ::= { rcIp 114 }
|
|
|
|
rcIpSpbPimGwGlobal OBJECT IDENTIFIER ::= { rcIpSpbPimGw 1}
|
|
|
|
rcIpSpbPimGwGlobalHelloInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..18724)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PIM Gateway Hello transmission interval in seconds.
|
|
The PI Gateway VLAN inherits this value. The Gateway VLAN
|
|
Level setting will override this."
|
|
DEFVAL { 30 }
|
|
::= { rcIpSpbPimGwGlobal 1 }
|
|
|
|
rcIpSpbPimGwGlobalJoinPruneInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..18724)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PIM Gateway Join/Prune transmission interval in seconds.
|
|
The PIM Gateway VLAN inherits this value. The Gateway
|
|
VLAN level setting will override this."
|
|
DEFVAL { 60 }
|
|
::= { rcIpSpbPimGwGlobal 2 }
|
|
|
|
-- PIM Gateway Interface Table
|
|
|
|
rcIpSpbPimGwInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpSpbPimGwInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP PIM Gateway table"
|
|
::= { rcIpSpbPimGw 2 }
|
|
|
|
rcIpSpbPimGwInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpSpbPimGwInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Pim Gateway Interface Table."
|
|
INDEX { rcIpSpbPimGwInterfaceIfIndex }
|
|
::= { rcIpSpbPimGwInterfaceTable 1 }
|
|
|
|
RcIpSpbPimGwInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpSpbPimGwInterfaceIfIndex InterfaceIndex,
|
|
rcIpSpbPimGwInterfaceOperState INTEGER,
|
|
rcIpSpbPimGwInterfaceAddressType InetAddressType,
|
|
rcIpSpbPimGwInterfaceAddress InetAddress,
|
|
rcIpSpbPimGwInterfaceAddressMask InetAddress,
|
|
rcIpSpbPimGwInterfaceHelloInterval Integer32,
|
|
rcIpSpbPimGwInterfaceJoinPruneInterval Integer32
|
|
}
|
|
|
|
rcIpSpbPimGwInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "port"
|
|
::= { rcIpSpbPimGwInterfaceEntry 1 }
|
|
|
|
rcIpSpbPimGwInterfaceOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational state of this PIM-gw
|
|
interface."
|
|
::= { rcIpSpbPimGwInterfaceEntry 2 }
|
|
|
|
rcIpSpbPimGwInterfaceAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of this PIM-gw interface."
|
|
::= { rcIpSpbPimGwInterfaceEntry 3 }
|
|
|
|
rcIpSpbPimGwInterfaceAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (0|4|8|16|20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary IP address of this router on this PIM-gw
|
|
interface. The InetAddressType is given by the
|
|
rcIpSpbPimGwInterfaceAddressType object."
|
|
::= { rcIpSpbPimGwInterfaceEntry 4 }
|
|
|
|
rcIpSpbPimGwInterfaceAddressMask OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (0|4|8|16|20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary IP address mask of this router on this PIM-gw
|
|
interface."
|
|
::= { rcIpSpbPimGwInterfaceEntry 5 }
|
|
|
|
rcIpSpbPimGwInterfaceHelloInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..18724)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PIM Hello transmission interval. This PIM Gateway
|
|
VLAN level interval setting overrides the inherited
|
|
Global PIM Gateway Hello Interval setting.
|
|
Setting the Hello interval to 0 will cause neighbors
|
|
to never expire its neighborship with this local PIM
|
|
gateway interface."
|
|
|
|
DEFVAL { 30 }
|
|
::= { rcIpSpbPimGwInterfaceEntry 6 }
|
|
|
|
rcIpSpbPimGwInterfaceJoinPruneInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..18724)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PIM Join/Prune transmission interval. This PIM Gateway
|
|
VLAN level interval setting overrides the inherited Global
|
|
level Join/Prune transmission interval setting."
|
|
|
|
DEFVAL { 60 }
|
|
::= { rcIpSpbPimGwInterfaceEntry 7 }
|
|
|
|
-- Pim-gw Neighbor Table
|
|
|
|
rcIpSpbPimGwNeighborTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpSpbPimGwNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PIM-gw neighbor Table"
|
|
::= { rcIpSpbPimGw 3 }
|
|
|
|
rcIpSpbPimGwNeighborEntry OBJECT-TYPE
|
|
SYNTAX RcIpSpbPimGwNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimNeighborTable."
|
|
INDEX { rcIpSpbPimGwNeighborIfIndex,
|
|
rcIpSpbPimGwNeighborAddressType,
|
|
rcIpSpbPimGwNeighborAddress }
|
|
::= { rcIpSpbPimGwNeighborTable 1 }
|
|
|
|
RcIpSpbPimGwNeighborEntry ::= SEQUENCE {
|
|
rcIpSpbPimGwNeighborIfIndex InterfaceIndex,
|
|
rcIpSpbPimGwNeighborAddressType InetAddressType,
|
|
rcIpSpbPimGwNeighborAddress InetAddress,
|
|
rcIpSpbPimGwNeighborUpTime TimeTicks,
|
|
rcIpSpbPimGwNeighborExpiryTime TimeTicks
|
|
}
|
|
|
|
rcIpSpbPimGwNeighborIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface used to reach this
|
|
PIM-gw neighbor."
|
|
::= { rcIpSpbPimGwNeighborEntry 1 }
|
|
|
|
rcIpSpbPimGwNeighborAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of this PIM-gw neighbor."
|
|
::= { rcIpSpbPimGwNeighborEntry 2 }
|
|
|
|
|
|
rcIpSpbPimGwNeighborAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (4|8|16|20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary IP address of this PIM-gw neighbor. The
|
|
InetAddressType is given by the rcIpSpbPimGwNeighborAddressType
|
|
object."
|
|
::= { rcIpSpbPimGwNeighborEntry 3 }
|
|
|
|
rcIpSpbPimGwNeighborUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since this PIM-gw neighbor (last) became a neighbor
|
|
of the local router."
|
|
::= { rcIpSpbPimGwNeighborEntry 4 }
|
|
|
|
rcIpSpbPimGwNeighborExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time remaining before this PIM-gw neighbor will
|
|
time out."
|
|
::= { rcIpSpbPimGwNeighborEntry 5 }
|
|
|
|
-- SPB PIM GW Controller foreign source table
|
|
|
|
rcIpSpbPimGwControllerForeignSrcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpSpbPimGwControllerForeignSrcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Multicast foreign source table from SPB PIM GW controller.
|
|
This is table of IP multicast sources from non-SPBM domain."
|
|
::= { rcIpSpbPimGw 4 }
|
|
|
|
rcIpSpbPimGwControllerForeignSrcEntry OBJECT-TYPE
|
|
SYNTAX RcIpSpbPimGwControllerForeignSrcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of IP multicast foreign source."
|
|
INDEX { rcIpSpbPimGwControllerForeignSrcSourceAddress,
|
|
rcIpSpbPimGwControllerForeignSrcGroupAddress }
|
|
::= { rcIpSpbPimGwControllerForeignSrcTable 1 }
|
|
|
|
RcIpSpbPimGwControllerForeignSrcEntry ::=
|
|
SEQUENCE {
|
|
rcIpSpbPimGwControllerForeignSrcSourceAddress IpAddress,
|
|
rcIpSpbPimGwControllerForeignSrcGroupAddress IpAddress,
|
|
rcIpSpbPimGwControllerForeignSrcRowStatus RowStatus,
|
|
rcIpSpbPimGwControllerForeignSrcGatewaySysId OCTET STRING,
|
|
rcIpSpbPimGwControllerForeignSrcGatewayHostName OCTET STRING,
|
|
rcIpSpbPimGwControllerForeignSrcType INTEGER,
|
|
rcIpSpbPimGwControllerForeignSrcOwner IpAddress
|
|
}
|
|
|
|
rcIpSpbPimGwControllerForeignSrcSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The source IP address from non-SPBM multicast
|
|
domain."
|
|
::= { rcIpSpbPimGwControllerForeignSrcEntry 1 }
|
|
|
|
rcIpSpbPimGwControllerForeignSrcGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Multicast group IP address associated with the
|
|
foreign source."
|
|
::= { rcIpSpbPimGwControllerForeignSrcEntry 2 }
|
|
|
|
rcIpSpbPimGwControllerForeignSrcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcIpSpbPimGwControllerForeignSrcEntry 3 }
|
|
|
|
rcIpSpbPimGwControllerForeignSrcGatewaySysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "System ID of the node selected as the gateway for this
|
|
foreing source. This object has valid value if the source
|
|
has a gateway assigned. If the source is not assigned a gateway,
|
|
this object will have all 0s."
|
|
::= { rcIpSpbPimGwControllerForeignSrcEntry 4 }
|
|
|
|
rcIpSpbPimGwControllerForeignSrcGatewayHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host name of the node selected as the gateway for this
|
|
foreign source. This object has valid value if the source
|
|
has a gateway assigned. If the source is not assigned a gateway,
|
|
this object will have NULL."
|
|
::= { rcIpSpbPimGwControllerForeignSrcEntry 5 }
|
|
|
|
rcIpSpbPimGwControllerForeignSrcType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
msdp(2),
|
|
static(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of the owner of this source."
|
|
::= { rcIpSpbPimGwControllerForeignSrcEntry 6 }
|
|
|
|
rcIpSpbPimGwControllerForeignSrcOwner OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the MSDP peer if the foreign source
|
|
type (rcIpSpbPimGwControllerForeignSrcType) is MSDP."
|
|
::= { rcIpSpbPimGwControllerForeignSrcEntry 7 }
|
|
|
|
-- SPB PIM GW Controller SPBMC source table
|
|
|
|
rcIpSpbPimGwControllerSpbmcSrcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpSpbPimGwControllerSpbmcSrcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SPB Multicast source table from SPB PIM GW controller.
|
|
This is table for all SPBM sources distributed to MSDP."
|
|
::= { rcIpSpbPimGw 5 }
|
|
|
|
rcIpSpbPimGwControllerSpbmcSrcEntry OBJECT-TYPE
|
|
SYNTAX RcIpSpbPimGwControllerSpbmcSrcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of SPBMC source sent to MSDP."
|
|
INDEX { rcIpSpbPimGwControllerSpbmcSrcSourceAddress,
|
|
rcIpSpbPimGwControllerSpbmcSrcGroupAddress }
|
|
::= { rcIpSpbPimGwControllerSpbmcSrcTable 1 }
|
|
|
|
RcIpSpbPimGwControllerSpbmcSrcEntry ::=
|
|
SEQUENCE {
|
|
rcIpSpbPimGwControllerSpbmcSrcSourceAddress IpAddress,
|
|
rcIpSpbPimGwControllerSpbmcSrcGroupAddress IpAddress,
|
|
rcIpSpbPimGwControllerSpbmcSrcOriginatorSysId OCTET STRING,
|
|
rcIpSpbPimGwControllerSpbmcSrcOriginatorHostName OCTET STRING
|
|
}
|
|
|
|
rcIpSpbPimGwControllerSpbmcSrcSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The source IP address from SPBM multicast
|
|
domain."
|
|
::= { rcIpSpbPimGwControllerSpbmcSrcEntry 1 }
|
|
|
|
rcIpSpbPimGwControllerSpbmcSrcGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Multicast group IP address associated with the
|
|
SPBMC source."
|
|
::= { rcIpSpbPimGwControllerSpbmcSrcEntry 2 }
|
|
|
|
rcIpSpbPimGwControllerSpbmcSrcOriginatorSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "System ID of the node to which the source is attached to."
|
|
::= { rcIpSpbPimGwControllerSpbmcSrcEntry 3 }
|
|
|
|
rcIpSpbPimGwControllerSpbmcSrcOriginatorHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host name of the node to which the source is attached to."
|
|
::= { rcIpSpbPimGwControllerSpbmcSrcEntry 4 }
|
|
|
|
-- SPB PIM GW Gateway foreign source table
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpSpbPimGwGatewayForeignSrcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Multicast foreign source table from SPB PIM GW gateway."
|
|
::= { rcIpSpbPimGw 6 }
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcEntry OBJECT-TYPE
|
|
SYNTAX RcIpSpbPimGwGatewayForeignSrcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of IP multicast foreign source."
|
|
INDEX { rcIpSpbPimGwGatewayForeignSrcSourceAddress,
|
|
rcIpSpbPimGwGatewayForeignSrcGroupAddress,
|
|
rcIpSpbPimGwGatewayForeignSrcControllerSysId }
|
|
::= { rcIpSpbPimGwGatewayForeignSrcTable 1 }
|
|
|
|
RcIpSpbPimGwGatewayForeignSrcEntry ::=
|
|
SEQUENCE {
|
|
rcIpSpbPimGwGatewayForeignSrcSourceAddress IpAddress,
|
|
rcIpSpbPimGwGatewayForeignSrcGroupAddress IpAddress,
|
|
rcIpSpbPimGwGatewayForeignSrcControllerSysId OCTET STRING,
|
|
rcIpSpbPimGwGatewayForeignSrcControllerHostName OCTET STRING,
|
|
rcIpSpbPimGwGatewayForeignSrcGatewaySysId OCTET STRING,
|
|
rcIpSpbPimGwGatewayForeignSrcGatewayHostName OCTET STRING,
|
|
rcIpSpbPimGwGatewayForeignSrcInVid INTEGER,
|
|
rcIpSpbPimGwGatewayForeignSrcInPort InterfaceIndex,
|
|
rcIpSpbPimGwGatewayForeignSrcOwnerType INTEGER
|
|
}
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The source IP address foreign source entry."
|
|
::= { rcIpSpbPimGwGatewayForeignSrcEntry 1 }
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Multicast group IP address associated with the
|
|
foreign source."
|
|
::= { rcIpSpbPimGwGatewayForeignSrcEntry 2 }
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcControllerSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "System ID of the controller node (preferred controller) that
|
|
sent this foreing source."
|
|
::= { rcIpSpbPimGwGatewayForeignSrcEntry 3 }
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcControllerHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host name of the controller node that sent this
|
|
foreign source."
|
|
::= { rcIpSpbPimGwGatewayForeignSrcEntry 4 }
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcGatewaySysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "System ID of the node selected as the gateway for this
|
|
foreing source."
|
|
::= { rcIpSpbPimGwGatewayForeignSrcEntry 5 }
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcGatewayHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host name of the node selected as the gateway for this
|
|
foreign source."
|
|
::= { rcIpSpbPimGwGatewayForeignSrcEntry 6 }
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcInVid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The VLAN id of the PimGw interface through which the source
|
|
of this source is reachable."
|
|
::= { rcIpSpbPimGwGatewayForeignSrcEntry 7 }
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcInPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface through which the source of this source is
|
|
reachable."
|
|
::= { rcIpSpbPimGwGatewayForeignSrcEntry 8 }
|
|
|
|
rcIpSpbPimGwGatewayForeignSrcOwnerType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
msdp(2),
|
|
static(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "msdp - if the owner is MSDP;
|
|
static - otherwise"
|
|
::= { rcIpSpbPimGwGatewayForeignSrcEntry 9 }
|
|
|
|
-- Pim-gw Node Table
|
|
|
|
rcIpSpbPimGwNodeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpSpbPimGwNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PIM-gw node Table"
|
|
::= { rcIpSpbPimGw 7 }
|
|
|
|
rcIpSpbPimGwNodeEntry OBJECT-TYPE
|
|
SYNTAX RcIpSpbPimGwNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimNodeTable."
|
|
INDEX { rcIpSpbPimGwNodeMacAddress }
|
|
::= { rcIpSpbPimGwNodeTable 1 }
|
|
|
|
RcIpSpbPimGwNodeEntry ::= SEQUENCE {
|
|
rcIpSpbPimGwNodeMacAddress MacAddress,
|
|
rcIpSpbPimGwNodeHostName OCTET STRING,
|
|
rcIpSpbPimGwNodeRoleType INTEGER
|
|
}
|
|
|
|
rcIpSpbPimGwNodeMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Max Address of the active node."
|
|
::= { rcIpSpbPimGwNodeEntry 1 }
|
|
|
|
rcIpSpbPimGwNodeHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Host name of the active node."
|
|
::= { rcIpSpbPimGwNodeEntry 2 }
|
|
|
|
rcIpSpbPimGwNodeRoleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
controller(1),
|
|
gateway(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The role type of the node. It is either Gateway, Controller or both."
|
|
::= { rcIpSpbPimGwNodeEntry 3 }
|
|
|
|
-- IP COPS Global
|
|
|
|
rcIpCops OBJECT IDENTIFIER ::= { rcIp 19 }
|
|
|
|
rcCopsGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Cops feature enable/disable"
|
|
::= { rcIpCops 1 }
|
|
|
|
|
|
-- IP Rip Interface Table
|
|
|
|
rcIpRipInterface OBJECT IDENTIFIER ::= { rcIp 20 }
|
|
|
|
rcIpRipInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRipInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Rip Interface table"
|
|
::= { rcIpRipInterface 1 }
|
|
|
|
rcIpRipInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpRipInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Rip Interface Table."
|
|
INDEX { rcIpRipInterfaceAddress }
|
|
::= { rcIpRipInterfaceTable 1 }
|
|
|
|
RcIpRipInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpRipInterfaceAddress IpAddress,
|
|
rcIpRipInterfaceIfIndex InterfaceIndex,
|
|
rcIpRipInterfaceRipEnable EnableValue,
|
|
rcIpRipInterfaceAccDefRte TruthValue,
|
|
rcIpRipInterfaceAdvDefRte TruthValue,
|
|
rcIpRipInterfaceAutoAggregate TruthValue,
|
|
rcIpRipInterfaceCost Integer32,
|
|
rcIpRipInterfaceListen TruthValue,
|
|
rcIpRipInterfacePoison TruthValue,
|
|
rcIpRipInterfaceSupply TruthValue,
|
|
rcIpRipInterfaceTriggeredUpdate TruthValue,
|
|
rcIpRipInterfaceInPolicy DisplayString,
|
|
rcIpRipInterfaceOutPolicy DisplayString,
|
|
rcIpRipInterfaceProxyAnnounceFlag TruthValue,
|
|
rcIpRipInterfaceHolddown INTEGER,
|
|
rcIpRipInterfaceTimeout INTEGER
|
|
}
|
|
|
|
rcIpRipInterfaceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Address"
|
|
::= { rcIpRipInterfaceEntry 1 }
|
|
|
|
rcIpRipInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rip Interface If Index."
|
|
::= { rcIpRipInterfaceEntry 2 }
|
|
|
|
rcIpRipInterfaceRipEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 3 }
|
|
|
|
rcIpRipInterfaceAccDefRte OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 4 }
|
|
|
|
rcIpRipInterfaceAdvDefRte OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 5 }
|
|
|
|
rcIpRipInterfaceAutoAggregate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 6 }
|
|
|
|
rcIpRipInterfaceCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 7 }
|
|
|
|
rcIpRipInterfaceListen OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 8 }
|
|
|
|
rcIpRipInterfacePoison OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 9 }
|
|
|
|
rcIpRipInterfaceSupply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 10 }
|
|
|
|
rcIpRipInterfaceTriggeredUpdate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 11 }
|
|
|
|
rcIpRipInterfaceInPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 12 }
|
|
|
|
rcIpRipInterfaceOutPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 13 }
|
|
|
|
rcIpRipInterfaceProxyAnnounceFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpRipInterfaceEntry 14 }
|
|
|
|
rcIpRipInterfaceHolddown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..360)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the rip holddown timer for this
|
|
interface"
|
|
::= { rcIpRipInterfaceEntry 15 }
|
|
|
|
rcIpRipInterfaceTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (15..259200)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the rip timeout interval for this
|
|
interface"
|
|
::= { rcIpRipInterfaceEntry 16 }
|
|
|
|
-- IP Timed Prune Table
|
|
|
|
rcIpMulticastTimedPruneTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMulticastTimedPruneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This feature provides the ability for the user to
|
|
create (S,G) Forwarding Entries that would not be
|
|
pruned until a configurable timer expires. This feature
|
|
is targeted for Passport 8600. Currently
|
|
the timer value is set to 0."
|
|
::= { rcIp 21 }
|
|
|
|
rcIpMulticastTimedPruneEntry OBJECT-TYPE
|
|
SYNTAX RcIpMulticastTimedPruneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Multicast Timed Prune Table."
|
|
INDEX { rcIpMulticastTimedPruneGroupAddress,
|
|
rcIpMulticastTimedPruneSourceAddress,
|
|
rcIpMulticastTimedPruneSrcSubnetMask }
|
|
::= { rcIpMulticastTimedPruneTable 1 }
|
|
|
|
RcIpMulticastTimedPruneEntry ::=
|
|
SEQUENCE {
|
|
rcIpMulticastTimedPruneGroupAddress IpAddress,
|
|
rcIpMulticastTimedPruneSourceAddress IpAddress,
|
|
rcIpMulticastTimedPruneSrcSubnetMask IpAddress,
|
|
rcIpMulticastTimedPruneAgingTimer Integer32,
|
|
rcIpMulticastTimedPruneTimeLeft Integer32,
|
|
rcIpMulticastTimedPruneLastActivity TimeTicks,
|
|
rcIpMulticastTimedPruneRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMulticastTimedPruneGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This field indicates the IP Multicast Group
|
|
Address associated with the IP multicast stream."
|
|
::= { rcIpMulticastTimedPruneEntry 1 }
|
|
|
|
rcIpMulticastTimedPruneSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is the Source Subnet IP address of the
|
|
sender of the IP multicast stream."
|
|
::= { rcIpMulticastTimedPruneEntry 2 }
|
|
|
|
rcIpMulticastTimedPruneSrcSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is the Source Subnet Mask IP address of
|
|
the sender of the IP multicast stream."
|
|
::= { rcIpMulticastTimedPruneEntry 3 }
|
|
|
|
rcIpMulticastTimedPruneAgingTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This field represents the amount of time
|
|
(in minutes) this timed prune entry will be
|
|
kept in the forwarding table when there are no
|
|
more receivers. After this timer expires, this
|
|
timed prune entry would be treated as a normal
|
|
DVMRP/PIM forwarding entry. Aging Timer value of
|
|
0 (infinite time) indicates this timed prune entry
|
|
will not be deleted even when there are no
|
|
more receivers."
|
|
DEFVAL { 5 }
|
|
::= { rcIpMulticastTimedPruneEntry 4 }
|
|
|
|
rcIpMulticastTimedPruneTimeLeft OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This read-only field represents the remaining time
|
|
for which this timed prune entry will be kept in
|
|
the forwarding table. After this timer expires,
|
|
this timed prune entry would be treated as a normal
|
|
DVMRP/PIM forwarding entry. 0 in this field indicates
|
|
that this entry would not be aged out."
|
|
::= { rcIpMulticastTimedPruneEntry 5 }
|
|
|
|
rcIpMulticastTimedPruneLastActivity OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This read-only field represents the actual time since
|
|
the traffic has come from this Source, Group pair."
|
|
::= { rcIpMulticastTimedPruneEntry 6 }
|
|
|
|
rcIpMulticastTimedPruneRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rcIpMulticastTimedPruneEntry 7 }
|
|
|
|
|
|
-- ICMP Route discovery parameters
|
|
|
|
rcIpConfIcmpRdiscTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpConfIcmpRdiscEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain ICMP Route discovery information
|
|
for a particular interface."
|
|
::= { rcIp 22 }
|
|
|
|
rcIpConfIcmpRdiscEntry OBJECT-TYPE
|
|
SYNTAX RcIpConfIcmpRdiscEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing ICMP Rdisc information. An entry is
|
|
automatically created in this table when routing
|
|
is enabled for an interface -or- when an ip address
|
|
is configured on an interface."
|
|
INDEX { rcIpConfIcmpRdiscIfIndex }
|
|
::= { rcIpConfIcmpRdiscTable 1 }
|
|
|
|
RcIpConfIcmpRdiscEntry ::= SEQUENCE {
|
|
rcIpConfIcmpRdiscIfIndex INTEGER,
|
|
rcIpConfIcmpRdiscAdvAddress IpAddress,
|
|
rcIpConfIcmpRdiscAdvFlag TruthValue,
|
|
rcIpConfIcmpRdiscAdvLifetime INTEGER,
|
|
rcIpConfIcmpRdiscMaxAdvInterval INTEGER,
|
|
rcIpConfIcmpRdiscMinAdvInterval INTEGER,
|
|
rcIpConfIcmpRdiscPreferenceLevel INTEGER
|
|
}
|
|
|
|
rcIpConfIcmpRdiscIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN)."
|
|
::= { rcIpConfIcmpRdiscEntry 1 }
|
|
|
|
rcIpConfIcmpRdiscAdvAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Advertisement address to which the route discovery
|
|
advertisements transmitted on this interface."
|
|
::= { rcIpConfIcmpRdiscEntry 2 }
|
|
|
|
rcIpConfIcmpRdiscAdvFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to indicate whether or not the address is to
|
|
be advertised on this interface."
|
|
::= { rcIpConfIcmpRdiscEntry 3 }
|
|
|
|
rcIpConfIcmpRdiscAdvLifetime OBJECT-TYPE
|
|
SYNTAX INTEGER (4..9000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value to be placed in the lifetime field of
|
|
Router Advertisements sent from the interface."
|
|
::= { rcIpConfIcmpRdiscEntry 4 }
|
|
|
|
rcIpConfIcmpRdiscMaxAdvInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (4..1800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The maximum time allowed between sending
|
|
Router Advertisements from this interface."
|
|
::= { rcIpConfIcmpRdiscEntry 5 }
|
|
|
|
rcIpConfIcmpRdiscMinAdvInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (3..1800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The minimum time allowed between sending
|
|
Router Advertisements from this interface."
|
|
::= { rcIpConfIcmpRdiscEntry 6 }
|
|
|
|
|
|
rcIpConfIcmpRdiscPreferenceLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (-2147483648..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Preferability of the router address as a default
|
|
Router "
|
|
::= { rcIpConfIcmpRdiscEntry 7 }
|
|
|
|
|
|
--IP Mcast Software Forwarding Group
|
|
|
|
rcIpMulticastSoftwareForwarding OBJECT IDENTIFIER ::= { rcIp 23 }
|
|
|
|
rcIpMulticastSoftwareForwardingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable multicast software
|
|
forwarding."
|
|
DEFVAL { false }
|
|
::= { rcIpMulticastSoftwareForwarding 1 }
|
|
|
|
rcIpMulticastSoftwareForwardingThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Threshold to switch from software forwarding to hardware forwarding. Unit = pkt per second"
|
|
DEFVAL { 5 }
|
|
::= { rcIpMulticastSoftwareForwarding 2 }
|
|
|
|
--IP Mroute-Hw
|
|
|
|
rcIpMrouteHw OBJECT IDENTIFIER ::= { rcIp 24 }
|
|
|
|
rcIpMrouteHwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMrouteHwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table containing hardware entries of
|
|
multicast routing information for all the Group Address."
|
|
::= { rcIpMrouteHw 1 }
|
|
|
|
rcIpMrouteHwEntry OBJECT-TYPE
|
|
SYNTAX RcIpMrouteHwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) containing hardware entries of
|
|
multicast routing information for a particular Group
|
|
Address."
|
|
INDEX { rcIpMrouteHwGroupAddress,
|
|
rcIpMrouteHwSubnet,
|
|
rcIpMrouteHwInvlan,
|
|
rcIpMrouteHwIndex }
|
|
::= { rcIpMrouteHwTable 1 }
|
|
|
|
RcIpMrouteHwEntry ::=
|
|
SEQUENCE {
|
|
rcIpMrouteHwGroupAddress IpAddress,
|
|
rcIpMrouteHwSubnet IpAddress,
|
|
rcIpMrouteHwInvlan RcVlanIdOrNone,
|
|
rcIpMrouteHwPruned TruthValue,
|
|
rcIpMrouteHwIndex Integer32
|
|
}
|
|
|
|
rcIpMrouteHwGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIpMrouteHwEntry 1 }
|
|
|
|
rcIpMrouteHwSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The network address from where the source is sending the
|
|
stream of traffic for which this entry contains multicast
|
|
routing information."
|
|
::= { rcIpMrouteHwEntry 2 }
|
|
|
|
rcIpMrouteHwInvlan OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Ingress vlan Id from where the traffic is coming for
|
|
which this entry contains multicast routing information."
|
|
::= { rcIpMrouteHwEntry 3 }
|
|
|
|
rcIpMrouteHwPruned OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is to show weather the entry containing multicast
|
|
routing information has received Prune message or not."
|
|
::= { rcIpMrouteHwEntry 4 }
|
|
|
|
rcIpMrouteHwIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This Index value keep tracks of the hardware record that
|
|
has been accessed for displaying the entry containing multicast routing information."
|
|
::= { rcIpMrouteHwEntry 5 }
|
|
|
|
rcIpMrouteHwPrunesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMrouteHwPrunesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table containing prune entries of
|
|
multicast routing information for the Group Address."
|
|
::= { rcIpMrouteHw 2 }
|
|
|
|
rcIpMrouteHwPrunesEntry OBJECT-TYPE
|
|
SYNTAX RcIpMrouteHwPrunesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) containing prune entries of
|
|
multicast routing information for a particular Group
|
|
Address."
|
|
INDEX { rcIpMrouteHwPrunesGroupAddress,
|
|
rcIpMrouteHwPrunesSubnet,
|
|
rcIpMrouteHwPrunesInvlan,
|
|
rcIpMrouteHwPrunesNeighbor }
|
|
::= { rcIpMrouteHwPrunesTable 1 }
|
|
|
|
RcIpMrouteHwPrunesEntry ::=
|
|
SEQUENCE {
|
|
rcIpMrouteHwPrunesGroupAddress IpAddress,
|
|
rcIpMrouteHwPrunesSubnet IpAddress,
|
|
rcIpMrouteHwPrunesInvlan RcVlanIdOrNone,
|
|
rcIpMrouteHwPrunesNeighbor IpAddress,
|
|
rcIpMrouteHwPrunesTimer Integer32
|
|
}
|
|
|
|
rcIpMrouteHwPrunesGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIpMrouteHwPrunesEntry 1 }
|
|
|
|
rcIpMrouteHwPrunesSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The network address from where the source is sending the
|
|
stream of traffic for which this entry contains
|
|
multicast routing information."
|
|
::= { rcIpMrouteHwPrunesEntry 2 }
|
|
|
|
rcIpMrouteHwPrunesInvlan OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Ingress vlan Id from where the traffic is coming for
|
|
which this entry contains multicast routing information."
|
|
::= { rcIpMrouteHwPrunesEntry 3 }
|
|
|
|
rcIpMrouteHwPrunesNeighbor OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IpAddress from where the Prune message has been
|
|
received."
|
|
::= { rcIpMrouteHwPrunesEntry 4 }
|
|
|
|
rcIpMrouteHwPrunesTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is to show how much time is left for this particular
|
|
entry containing multicast routing information during
|
|
which the graft message can be sent."
|
|
::= { rcIpMrouteHwPrunesEntry 5 }
|
|
|
|
rcIpMrouteHwSourcesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMrouteHwSourcesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table containing source entries of
|
|
multicast routing information for the Group Address."
|
|
::= { rcIpMrouteHw 3 }
|
|
|
|
rcIpMrouteHwSourcesEntry OBJECT-TYPE
|
|
SYNTAX RcIpMrouteHwSourcesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) containing source entries of
|
|
multicast routing information for a particular Group
|
|
Address."
|
|
INDEX { rcIpMrouteHwSourcesGroupAddress,
|
|
rcIpMrouteHwSourcesSubnet,
|
|
rcIpMrouteHwSourcesInvlan,
|
|
rcIpMrouteHwSourcesAddress }
|
|
::= { rcIpMrouteHwSourcesTable 1 }
|
|
|
|
RcIpMrouteHwSourcesEntry ::=
|
|
SEQUENCE {
|
|
rcIpMrouteHwSourcesGroupAddress IpAddress,
|
|
rcIpMrouteHwSourcesSubnet IpAddress,
|
|
rcIpMrouteHwSourcesInvlan RcVlanIdOrNone,
|
|
rcIpMrouteHwSourcesAddress IpAddress,
|
|
rcIpMrouteHwSourcesIngressPort PortSet
|
|
}
|
|
|
|
rcIpMrouteHwSourcesGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIpMrouteHwSourcesEntry 1 }
|
|
|
|
rcIpMrouteHwSourcesSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The network address from where the source is sending the
|
|
stream of traffic for which this entry contains
|
|
multicast routing information."
|
|
::= { rcIpMrouteHwSourcesEntry 2 }
|
|
|
|
rcIpMrouteHwSourcesInvlan OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Ingress vlan Id from where the traffic is coming for
|
|
which this entry contains multicast routing information."
|
|
::= { rcIpMrouteHwSourcesEntry 3 }
|
|
|
|
rcIpMrouteHwSourcesAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Source Address from where the stream of traffic is reaching the corresponding Group Address for which this
|
|
entry contains multicast routing information."
|
|
::= { rcIpMrouteHwSourcesEntry 4 }
|
|
|
|
rcIpMrouteHwSourcesIngressPort OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Ingress vlan ports from where the traffic is coming,
|
|
for which this entry contains multicast routing
|
|
information."
|
|
::= { rcIpMrouteHwSourcesEntry 5 }
|
|
|
|
rcIpMrouteHwEgressVlansTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMrouteHwEgressVlansEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table containing egress vlan entries of
|
|
multicast routing information for the Group Address."
|
|
::= { rcIpMrouteHw 4 }
|
|
|
|
rcIpMrouteHwEgressVlansEntry OBJECT-TYPE
|
|
SYNTAX RcIpMrouteHwEgressVlansEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) containing egress vlan entries
|
|
of multicast routing information for a particular Group
|
|
Address."
|
|
INDEX { rcIpMrouteHwEgressVlansGroupAddress,
|
|
rcIpMrouteHwEgressVlansSubnet,
|
|
rcIpMrouteHwEgressVlansInvlan,
|
|
rcIpMrouteHwEgressVlansId,
|
|
rcIpMrouteHwEgressVlansIndex }
|
|
::= { rcIpMrouteHwEgressVlansTable 1 }
|
|
|
|
RcIpMrouteHwEgressVlansEntry ::=
|
|
SEQUENCE {
|
|
rcIpMrouteHwEgressVlansGroupAddress IpAddress,
|
|
rcIpMrouteHwEgressVlansSubnet IpAddress,
|
|
rcIpMrouteHwEgressVlansInvlan RcVlanIdOrNone,
|
|
rcIpMrouteHwEgressVlansId RcVlanIdOrNone,
|
|
rcIpMrouteHwEgressVlansPorts PortSet,
|
|
rcIpMrouteHwEgressVlansIndex Integer32
|
|
}
|
|
|
|
rcIpMrouteHwEgressVlansGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIpMrouteHwEgressVlansEntry 1 }
|
|
|
|
rcIpMrouteHwEgressVlansSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The network address from where the source is sending the
|
|
stream of traffic for which this entry contains
|
|
multicast routing information."
|
|
::= { rcIpMrouteHwEgressVlansEntry 2 }
|
|
|
|
rcIpMrouteHwEgressVlansInvlan OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Ingress vlan Id from where the traffic is coming for
|
|
which this entry contains multicast routing information."
|
|
::= { rcIpMrouteHwEgressVlansEntry 3 }
|
|
|
|
rcIpMrouteHwEgressVlansId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Egress vlan Id from where the traffic is going out
|
|
for which this entry contains multicast routing
|
|
information"
|
|
::= { rcIpMrouteHwEgressVlansEntry 4 }
|
|
|
|
rcIpMrouteHwEgressVlansPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "he Egress vlan ports from where the traffic is going out
|
|
for which this entry contains multicast routing
|
|
information."
|
|
::= { rcIpMrouteHwEgressVlansEntry 5 }
|
|
|
|
rcIpMrouteHwEgressVlansIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This Index value keep tracks of the hardware record that
|
|
has been accessed for displaying the entry containing
|
|
multicast routing information."
|
|
::= { rcIpMrouteHwEgressVlansEntry 6 }
|
|
|
|
|
|
-- IP Resource Usage Global
|
|
|
|
rcIpResourceUsage OBJECT IDENTIFIER ::= { rcIp 25 }
|
|
|
|
rcIpResourceUsageGlobal OBJECT IDENTIFIER ::= { rcIpResourceUsage 1 }
|
|
|
|
rcIpResourceUsageGlobalIngressRecInUse OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32767)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to get the Ingress Record Usage in the switch.
|
|
(S-G usage)."
|
|
::= { rcIpResourceUsageGlobal 1 }
|
|
|
|
rcIpResourceUsageGlobalEgressRecInUse OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32767)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to get the Egress Record Usage in the switch
|
|
(pepstream count)."
|
|
::= { rcIpResourceUsageGlobal 2 }
|
|
|
|
rcIpResourceUsageGlobalIngressThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to get the threshold count for Ingress records."
|
|
DEFVAL { 0 }
|
|
::= { rcIpResourceUsageGlobal 3 }
|
|
|
|
rcIpResourceUsageGlobalEgressThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to get threshold count for egress records."
|
|
DEFVAL { 0 }
|
|
::= { rcIpResourceUsageGlobal 4 }
|
|
|
|
rcIpResourceUsageGlobalSendTrapAndLog OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A means of alerting the user. If this bool is set,
|
|
a message will be send to console and also a
|
|
duReport will be logged."
|
|
DEFVAL { disable }
|
|
::= { rcIpResourceUsageGlobal 5 }
|
|
|
|
rcIpResourceUsageGlobalSendTrapOnly OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A means of alerting the user. If this bool is set,
|
|
a message will be send to console."
|
|
DEFVAL { disable }
|
|
::= { rcIpResourceUsageGlobal 6 }
|
|
|
|
rcIpResourceUsageGlobalLogMsgOnly OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A means of alerting the user.If this bool is set,
|
|
a duReport will be logged."
|
|
DEFVAL { disable }
|
|
::= { rcIpResourceUsageGlobal 7 }
|
|
|
|
|
|
rcIpRsmlt OBJECT IDENTIFIER ::= { rcIp 26 }
|
|
|
|
rcIpRsmltGlobal OBJECT IDENTIFIER ::= { rcIpRsmlt 1 }
|
|
|
|
rcIpRsmltGlobalTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt table size."
|
|
::= { rcIpRsmltGlobal 1 }
|
|
|
|
rcIpRsmltEdgeSupportEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable RSMLT Edge Support feature"
|
|
DEFVAL { false }
|
|
::= { rcIpRsmltGlobal 2}
|
|
|
|
rcIpRsmltOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRsmltOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Table"
|
|
::= { rcIpRsmlt 2 }
|
|
|
|
rcIpRsmltOperEntry OBJECT-TYPE
|
|
SYNTAX RcIpRsmltOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip As Path Access List Table."
|
|
INDEX { rcIpRsmltOperIfIndex }
|
|
::= { rcIpRsmltOperTable 1 }
|
|
|
|
RcIpRsmltOperEntry ::=
|
|
SEQUENCE {
|
|
rcIpRsmltOperIfIndex InterfaceIndex,
|
|
rcIpRsmltOperAdminStatus TruthValue,
|
|
rcIpRsmltOperHoldDownTimer INTEGER,
|
|
rcIpRsmltOperHoldDownTimeRemaining INTEGER,
|
|
rcIpRsmltOperHoldUpTimer INTEGER,
|
|
rcIpRsmltOperHoldUpTimeRemaining INTEGER,
|
|
rcIpRsmltOperIpAddr IpAddress,
|
|
rcIpRsmltOperOperStatus INTEGER,
|
|
rcIpRsmltOperSmltId IdList,
|
|
rcIpRsmltOperSltId IdList,
|
|
rcIpRsmltOperVlanId INTEGER,
|
|
rcIpRsmltOperMacAddr MacAddress,
|
|
rcIpRsmltOperRowStatus RowStatus,
|
|
rcIpRsmltOperVrfId VrfIdentifier,
|
|
rcIpRsmltOperVrfName SnmpAdminString
|
|
}
|
|
|
|
rcIpRsmltOperIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Oper IfIndex."
|
|
::= { rcIpRsmltOperEntry 1 }
|
|
|
|
rcIpRsmltOperAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "is a enable/disable flag."
|
|
DEFVAL { false }
|
|
::= { rcIpRsmltOperEntry 2 }
|
|
|
|
rcIpRsmltOperHoldDownTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Timer value, the range of value is from 0 to 3600."
|
|
DEFVAL { 0 }
|
|
::= { rcIpRsmltOperEntry 3 }
|
|
|
|
rcIpRsmltOperHoldDownTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldDownTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpRsmltOperEntry 4 }
|
|
|
|
rcIpRsmltOperHoldUpTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600 | 9999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means
|
|
infinity."
|
|
DEFVAL { 0 }
|
|
::= { rcIpRsmltOperEntry 5 }
|
|
|
|
rcIpRsmltOperHoldUpTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600 | 9999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldUpTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpRsmltOperEntry 6 }
|
|
|
|
rcIpRsmltOperIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP Interface with RSMLT on."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcIpRsmltOperEntry 7 }
|
|
|
|
rcIpRsmltOperOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operation status of Rsmlt, up or down."
|
|
DEFVAL { down }
|
|
::= { rcIpRsmltOperEntry 8 }
|
|
|
|
rcIpRsmltOperSmltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SMLT is 1-32."
|
|
::= { rcIpRsmltOperEntry 9 }
|
|
|
|
rcIpRsmltOperSltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SLT is 1-512."
|
|
::= { rcIpRsmltOperEntry 10 }
|
|
|
|
rcIpRsmltOperVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4093)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan id."
|
|
::= { rcIpRsmltOperEntry 11 }
|
|
|
|
rcIpRsmltOperMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac Address."
|
|
::= { rcIpRsmltOperEntry 12 }
|
|
|
|
rcIpRsmltOperRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row Status."
|
|
::= { rcIpRsmltOperEntry 13 }
|
|
|
|
rcIpRsmltOperVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Virtual Router to which the RSMLT
|
|
Oper instance belongs."
|
|
::= { rcIpRsmltOperEntry 14 }
|
|
|
|
rcIpRsmltOperVrfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the Virtual Router to which the RSMLT Oper
|
|
instance belongs."
|
|
::= { rcIpRsmltOperEntry 15 }
|
|
|
|
-- Route Smlt Peer Table
|
|
|
|
rcIpRsmltPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRsmltPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Table"
|
|
::= { rcIpRsmlt 3 }
|
|
|
|
rcIpRsmltPeerEntry OBJECT-TYPE
|
|
SYNTAX RcIpRsmltPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip As Path Access List Table."
|
|
INDEX { rcIpRsmltPeerIfIndex }
|
|
::= { rcIpRsmltPeerTable 1 }
|
|
|
|
RcIpRsmltPeerEntry ::=
|
|
SEQUENCE {
|
|
rcIpRsmltPeerIfIndex InterfaceIndex,
|
|
rcIpRsmltPeerAdminStatus TruthValue,
|
|
rcIpRsmltPeerHoldDownTimer INTEGER,
|
|
rcIpRsmltPeerHoldDownTimeRemaining INTEGER,
|
|
rcIpRsmltPeerHoldUpTimer INTEGER,
|
|
rcIpRsmltPeerHoldUpTimeRemaining INTEGER,
|
|
rcIpRsmltPeerIpAddr IpAddress,
|
|
rcIpRsmltPeerOperStatus INTEGER,
|
|
rcIpRsmltPeerSmltId IdList,
|
|
rcIpRsmltPeerSltId IdList,
|
|
rcIpRsmltPeerVlanId INTEGER,
|
|
rcIpRsmltPeerMacAddr MacAddress,
|
|
rcIpRsmltPeerVrfId VrfIdentifier,
|
|
rcIpRsmltPeerVrfName SnmpAdminString
|
|
}
|
|
|
|
rcIpRsmltPeerIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Oper IfIndex."
|
|
::= { rcIpRsmltPeerEntry 1 }
|
|
|
|
rcIpRsmltPeerAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "is a enable/disable flag."
|
|
::= { rcIpRsmltPeerEntry 2 }
|
|
|
|
rcIpRsmltPeerHoldDownTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timer value, the range of value is from 0 to 3600."
|
|
DEFVAL { 0 }
|
|
::= { rcIpRsmltPeerEntry 3 }
|
|
|
|
rcIpRsmltPeerHoldDownTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldDownTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpRsmltPeerEntry 4 }
|
|
|
|
rcIpRsmltPeerHoldUpTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600 | 9999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means
|
|
infinity."
|
|
DEFVAL { 0 }
|
|
::= { rcIpRsmltPeerEntry 5 }
|
|
|
|
rcIpRsmltPeerHoldUpTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600 | 9999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldUpTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpRsmltPeerEntry 6 }
|
|
|
|
rcIpRsmltPeerIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP Interface with RSMLT on."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcIpRsmltPeerEntry 7 }
|
|
|
|
rcIpRsmltPeerOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operation status of Rsmlt, up or down."
|
|
DEFVAL { down }
|
|
::= { rcIpRsmltPeerEntry 8 }
|
|
|
|
rcIpRsmltPeerSmltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SMLT is 1-32."
|
|
::= { rcIpRsmltPeerEntry 9 }
|
|
|
|
rcIpRsmltPeerSltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SLT is 1-512."
|
|
::= { rcIpRsmltPeerEntry 10 }
|
|
|
|
rcIpRsmltPeerVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4093)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan id."
|
|
::= { rcIpRsmltPeerEntry 11 }
|
|
|
|
rcIpRsmltPeerMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac Address."
|
|
::= { rcIpRsmltPeerEntry 12 }
|
|
|
|
rcIpRsmltPeerVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Virtual Router to which the RSMLT Peer
|
|
instance belongs."
|
|
::= { rcIpRsmltPeerEntry 13 }
|
|
|
|
rcIpRsmltPeerVrfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the Virtual Router to which the RSMLT Peer
|
|
instance belongs."
|
|
::= { rcIpRsmltPeerEntry 14 }
|
|
|
|
rcIpRsmltEdgePeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRsmltEdgePeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RSMLT Edge Support Peer Info table. This
|
|
table consists of the RSMLT Peers for which
|
|
the switch will act as a PeerForwarder."
|
|
::= { rcIpRsmlt 4 }
|
|
|
|
rcIpRsmltEdgePeerEntry OBJECT-TYPE
|
|
SYNTAX RcIpRsmltEdgePeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RSMLT Edge Support Peer Info Entry"
|
|
INDEX { rcIpRsmltEdgeVlanId }
|
|
::= { rcIpRsmltEdgePeerTable 1 }
|
|
|
|
RcIpRsmltEdgePeerEntry ::=
|
|
SEQUENCE {
|
|
rcIpRsmltEdgeVlanId RcVlanIdOrNone,
|
|
rcIpRsmltEdgePeerIpAddress IpAddress,
|
|
rcIpRsmltEdgePeerMacAddress MacAddress,
|
|
rcIpRsmltEdgePeerVrfId VrfIdentifier,
|
|
rcIpRsmltEdgePeerVrfName SnmpAdminString
|
|
}
|
|
|
|
rcIpRsmltEdgeVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual LAN
|
|
associated with this entry."
|
|
::= { rcIpRsmltEdgePeerEntry 1}
|
|
|
|
rcIpRsmltEdgePeerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address of the Peer RSMLT Interface."
|
|
::= { rcIpRsmltEdgePeerEntry 2}
|
|
|
|
rcIpRsmltEdgePeerMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of the Peer RSMLT interface."
|
|
::= { rcIpRsmltEdgePeerEntry 3}
|
|
|
|
rcIpRsmltEdgePeerVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Virtual Router to which the RSMLT Edge Peer
|
|
instance belongs."
|
|
::= { rcIpRsmltEdgePeerEntry 4 }
|
|
|
|
rcIpRsmltEdgePeerVrfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the Virtual Router to which the RSMLT Edge Peer
|
|
instance belongs."
|
|
::= { rcIpRsmltEdgePeerEntry 5 }
|
|
|
|
-- IPv6 RSMLT
|
|
|
|
rcIpv6RsmltOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RsmltOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Table"
|
|
::= { rcIpRsmlt 5 }
|
|
|
|
rcIpv6RsmltOperEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RsmltOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A local IPv6 RSMLT entry"
|
|
INDEX { rcIpv6RsmltOperIfIndex,
|
|
rcIpv6RsmltOperIpv6Addr,
|
|
rcIpv6RsmltOperIpv6PrefixLength }
|
|
::= { rcIpv6RsmltOperTable 1 }
|
|
|
|
RcIpv6RsmltOperEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RsmltOperIfIndex InterfaceIndex,
|
|
rcIpv6RsmltOperIpv6Addr Ipv6Address,
|
|
rcIpv6RsmltOperIpv6PrefixLength Integer32,
|
|
rcIpv6RsmltOperAdminStatus TruthValue,
|
|
rcIpv6RsmltOperHoldDownTimer Integer32,
|
|
rcIpv6RsmltOperHoldDownTimeRemaining Integer32,
|
|
rcIpv6RsmltOperHoldUpTimer Integer32,
|
|
rcIpv6RsmltOperHoldUpTimeRemaining Integer32,
|
|
rcIpv6RsmltOperOperStatus INTEGER,
|
|
rcIpv6RsmltOperSmltId IdList,
|
|
rcIpv6RsmltOperSltId IdList,
|
|
rcIpv6RsmltOperVlanId Integer32,
|
|
rcIpv6RsmltOperMacAddr MacAddress,
|
|
rcIpv6RsmltOperVrfId VrfIdentifier,
|
|
rcIpv6RsmltOperVrfName SnmpAdminString
|
|
}
|
|
|
|
rcIpv6RsmltOperIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Oper IfIndex."
|
|
::= { rcIpv6RsmltOperEntry 1 }
|
|
|
|
rcIpv6RsmltOperIpv6Addr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 Interface with RSMLT on."
|
|
::= { rcIpv6RsmltOperEntry 2 }
|
|
|
|
rcIpv6RsmltOperIpv6PrefixLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 Prefix Length."
|
|
::= { rcIpv6RsmltOperEntry 3 }
|
|
|
|
rcIpv6RsmltOperAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "is a enable/disable flag."
|
|
DEFVAL { false }
|
|
::= { rcIpv6RsmltOperEntry 4 }
|
|
|
|
rcIpv6RsmltOperHoldDownTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Timer value, the range of value is from 0 to 3600."
|
|
DEFVAL { 0 }
|
|
::= { rcIpv6RsmltOperEntry 5 }
|
|
|
|
rcIpv6RsmltOperHoldDownTimeRemaining OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldDownTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpv6RsmltOperEntry 6 }
|
|
|
|
rcIpv6RsmltOperHoldUpTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600 | 9999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means
|
|
infinity."
|
|
DEFVAL { 0 }
|
|
::= { rcIpv6RsmltOperEntry 7 }
|
|
|
|
rcIpv6RsmltOperHoldUpTimeRemaining OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600 | 9999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldUpTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpv6RsmltOperEntry 8 }
|
|
|
|
rcIpv6RsmltOperOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operation status of Rsmlt, up or down."
|
|
DEFVAL { down }
|
|
::= { rcIpv6RsmltOperEntry 9 }
|
|
|
|
rcIpv6RsmltOperSmltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SMLT is 1-32."
|
|
::= { rcIpv6RsmltOperEntry 10 }
|
|
|
|
rcIpv6RsmltOperSltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SLT is 1-512."
|
|
::= { rcIpv6RsmltOperEntry 11 }
|
|
|
|
rcIpv6RsmltOperVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4093)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan id."
|
|
::= { rcIpv6RsmltOperEntry 12 }
|
|
|
|
rcIpv6RsmltOperMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac Address."
|
|
::= { rcIpv6RsmltOperEntry 13 }
|
|
|
|
rcIpv6RsmltOperVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Virtual Router to which the RSMLT
|
|
Oper instance belongs."
|
|
::= { rcIpv6RsmltOperEntry 14 }
|
|
|
|
rcIpv6RsmltOperVrfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the Virtual Router to which the RSMLT Oper
|
|
instance belongs."
|
|
::= { rcIpv6RsmltOperEntry 15 }
|
|
|
|
|
|
-- Route IPv6 Smlt Peer Table
|
|
|
|
rcIpv6RsmltPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RsmltPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Peer Table"
|
|
::= { rcIpRsmlt 6 }
|
|
|
|
rcIpv6RsmltPeerEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RsmltPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip As Path Access List Table."
|
|
INDEX { rcIpv6RsmltPeerIfIndex,
|
|
rcIpv6RsmltPeerIpv6Addr,
|
|
rcIpv6RsmltPeerIpv6PrefixLength }
|
|
::= { rcIpv6RsmltPeerTable 1 }
|
|
|
|
RcIpv6RsmltPeerEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RsmltPeerIfIndex InterfaceIndex,
|
|
rcIpv6RsmltPeerIpv6Addr Ipv6Address,
|
|
rcIpv6RsmltPeerIpv6PrefixLength Integer32,
|
|
rcIpv6RsmltPeerAdminStatus TruthValue,
|
|
rcIpv6RsmltPeerHoldDownTimer Integer32,
|
|
rcIpv6RsmltPeerHoldDownTimeRemaining Integer32,
|
|
rcIpv6RsmltPeerHoldUpTimer Integer32,
|
|
rcIpv6RsmltPeerHoldUpTimeRemaining Integer32,
|
|
rcIpv6RsmltPeerOperStatus INTEGER,
|
|
rcIpv6RsmltPeerSmltId IdList,
|
|
rcIpv6RsmltPeerSltId IdList,
|
|
rcIpv6RsmltPeerVlanId Integer32,
|
|
rcIpv6RsmltPeerMacAddr MacAddress,
|
|
rcIpv6RsmltPeerVrfId VrfIdentifier,
|
|
rcIpv6RsmltPeerVrfName SnmpAdminString
|
|
}
|
|
|
|
rcIpv6RsmltPeerIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Oper IfIndex."
|
|
::= { rcIpv6RsmltPeerEntry 1 }
|
|
|
|
rcIpv6RsmltPeerIpv6Addr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Interface with RSMLT on."
|
|
::= { rcIpv6RsmltPeerEntry 2 }
|
|
|
|
rcIpv6RsmltPeerIpv6PrefixLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 Prefix Length"
|
|
::= { rcIpv6RsmltPeerEntry 3 }
|
|
|
|
rcIpv6RsmltPeerAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "is a enable/disable flag."
|
|
::= { rcIpv6RsmltPeerEntry 4 }
|
|
|
|
rcIpv6RsmltPeerHoldDownTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timer value, the range of value is from 0 to 3600."
|
|
DEFVAL { 0 }
|
|
::= { rcIpv6RsmltPeerEntry 5 }
|
|
|
|
rcIpv6RsmltPeerHoldDownTimeRemaining OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldDownTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpv6RsmltPeerEntry 6 }
|
|
|
|
rcIpv6RsmltPeerHoldUpTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600 | 9999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means
|
|
infinity."
|
|
DEFVAL { 0 }
|
|
::= { rcIpv6RsmltPeerEntry 7 }
|
|
|
|
rcIpv6RsmltPeerHoldUpTimeRemaining OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600 | 9999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldUpTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpv6RsmltPeerEntry 8 }
|
|
|
|
rcIpv6RsmltPeerOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operation status of Rsmlt, up or down."
|
|
DEFVAL { down }
|
|
::= { rcIpv6RsmltPeerEntry 9 }
|
|
|
|
rcIpv6RsmltPeerSmltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SMLT is 1-32."
|
|
::= { rcIpv6RsmltPeerEntry 10 }
|
|
|
|
rcIpv6RsmltPeerSltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SLT is 1-512."
|
|
::= { rcIpv6RsmltPeerEntry 11 }
|
|
|
|
rcIpv6RsmltPeerVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4093)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan id."
|
|
::= { rcIpv6RsmltPeerEntry 12 }
|
|
|
|
rcIpv6RsmltPeerMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac Address."
|
|
::= { rcIpv6RsmltPeerEntry 13 }
|
|
|
|
rcIpv6RsmltPeerVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Virtual Router to which the RSMLT Peer
|
|
instance belongs."
|
|
::= { rcIpv6RsmltPeerEntry 14 }
|
|
|
|
rcIpv6RsmltPeerVrfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the Virtual Router to which the RSMLT Peer
|
|
instance belongs."
|
|
::= { rcIpv6RsmltPeerEntry 15 }
|
|
|
|
|
|
-- IPv6 RSMLT Edge Peer table
|
|
|
|
rcIpv6RsmltEdgePeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RsmltEdgePeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RSMLT Edge Support Peer Info table. This
|
|
table consists of the RSMLT Peers for which
|
|
the switch will act as a PeerForwarder."
|
|
::= { rcIpRsmlt 7 }
|
|
|
|
rcIpv6RsmltEdgePeerEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RsmltEdgePeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RSMLT Edge Support Peer Info Entry"
|
|
INDEX { rcIpv6RsmltEdgePeerVlanId,
|
|
rcIpv6RsmltEdgePeerIpv6Address,
|
|
rcIpv6RsmltEdgePeerIpv6PrefixLength }
|
|
::= { rcIpv6RsmltEdgePeerTable 1 }
|
|
|
|
RcIpv6RsmltEdgePeerEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RsmltEdgePeerVlanId Integer32,
|
|
rcIpv6RsmltEdgePeerIpv6Address Ipv6Address,
|
|
rcIpv6RsmltEdgePeerIpv6PrefixLength Integer32,
|
|
rcIpv6RsmltEdgePeerMacAddress MacAddress,
|
|
rcIpv6RsmltEdgePeerVrfId VrfIdentifier,
|
|
rcIpv6RsmltEdgePeerVrfName SnmpAdminString,
|
|
rcIpv6RsmltEdgePeerIsRaPrefix TruthValue,
|
|
rcIpv6RsmltEdgePeerConfType Integer32,
|
|
rcIpv6RsmltEdgePeerNoAdvertise TruthValue,
|
|
rcIpv6RsmltEdgePeerOspf6Advertise TruthValue,
|
|
rcIpv6RsmltEdgePeerPrefCandidate TruthValue,
|
|
rcIpv6RsmltEdgePeerPfxValidLife Integer32,
|
|
rcIpv6RsmltEdgePeerPfxPrefLife Integer32,
|
|
rcIpv6RsmltEdgePeerPfxOnLinkFlag TruthValue,
|
|
rcIpv6RsmltEdgePeerPfxAutoFlag TruthValue
|
|
}
|
|
|
|
rcIpv6RsmltEdgePeerVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual LAN
|
|
associated with this entry."
|
|
::= { rcIpv6RsmltEdgePeerEntry 1}
|
|
|
|
rcIpv6RsmltEdgePeerIpv6Address OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address of the Peer RSMLT Interface."
|
|
::= { rcIpv6RsmltEdgePeerEntry 2}
|
|
|
|
rcIpv6RsmltEdgePeerIpv6PrefixLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "If set then this prefix can be used
|
|
for address autoconfig,
|
|
passed opaquely to Infinity"
|
|
::= { rcIpv6RsmltEdgePeerEntry 3 }
|
|
|
|
rcIpv6RsmltEdgePeerMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of the Peer RSMLT interface."
|
|
::= { rcIpv6RsmltEdgePeerEntry 4 }
|
|
|
|
rcIpv6RsmltEdgePeerVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Virtual Router to which the RSMLT Edge Peer
|
|
instance belongs."
|
|
::= { rcIpv6RsmltEdgePeerEntry 5 }
|
|
|
|
rcIpv6RsmltEdgePeerVrfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the Virtual Router to which the RSMLT Edge Peer
|
|
instance belongs."
|
|
::= { rcIpv6RsmltEdgePeerEntry 6 }
|
|
|
|
rcIpv6RsmltEdgePeerIsRaPrefix OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "True if this is a Router Advertisement prefix, False if
|
|
this is a global address."
|
|
::= { rcIpv6RsmltEdgePeerEntry 7 }
|
|
|
|
rcIpv6RsmltEdgePeerConfType OBJECT-TYPE
|
|
SYNTAX Integer32 (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Type of configured address, passed opaquely to Infinity "
|
|
::= { rcIpv6RsmltEdgePeerEntry 8 }
|
|
|
|
rcIpv6RsmltEdgePeerNoAdvertise OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "True if advertisement of this prefix is disabled,
|
|
passed opaquely to Infinity"
|
|
::= { rcIpv6RsmltEdgePeerEntry 9 }
|
|
|
|
rcIpv6RsmltEdgePeerOspf6Advertise OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "True if OSPFv3 advertisement of this prefix is enabled,
|
|
passed opaquely to Infinity"
|
|
::= { rcIpv6RsmltEdgePeerEntry 10 }
|
|
|
|
rcIpv6RsmltEdgePeerPrefCandidate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "True if address is considered for preferred selection,
|
|
passed opaquely to Infinity"
|
|
::= { rcIpv6RsmltEdgePeerEntry 11 }
|
|
|
|
rcIpv6RsmltEdgePeerPfxValidLife OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Valid lifetime in seconds,
|
|
passed opaquely to Infinity"
|
|
::= { rcIpv6RsmltEdgePeerEntry 12 }
|
|
|
|
rcIpv6RsmltEdgePeerPfxPrefLife OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Preferred lifetime in seconds,
|
|
passed opaquely to Infinity"
|
|
::= { rcIpv6RsmltEdgePeerEntry 13 }
|
|
|
|
rcIpv6RsmltEdgePeerPfxOnLinkFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If set then this prefix can be used
|
|
for onlink determination,
|
|
passed opaquely to Infinity"
|
|
::= { rcIpv6RsmltEdgePeerEntry 14 }
|
|
|
|
rcIpv6RsmltEdgePeerPfxAutoFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If set then this prefix can be used
|
|
for address autoconfig,
|
|
passed opaquely to Infinity"
|
|
::= { rcIpv6RsmltEdgePeerEntry 15 }
|
|
|
|
--IP Net To Media
|
|
|
|
rcIpNetToMediaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpNetToMediaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address Translation table used for mapping
|
|
from IP addresses to physical addresses."
|
|
::= { rcIp 30 }
|
|
|
|
rcIpNetToMediaEntry OBJECT-TYPE
|
|
SYNTAX RcIpNetToMediaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one IpAddress to `physical'
|
|
address equivalence."
|
|
INDEX { rcIpNetToMediaNetAddress,
|
|
rcIpNetToMediaIfIndex }
|
|
::= { rcIpNetToMediaTable 1}
|
|
|
|
RcIpNetToMediaEntry ::=
|
|
SEQUENCE {
|
|
rcIpNetToMediaNetAddress IpAddress,
|
|
rcIpNetToMediaIfIndex InterfaceIndex,
|
|
rcIpNetToMediaPhysAddress PhysAddress,
|
|
rcIpNetToMediaType INTEGER,
|
|
rcIpNetToMediaTimeToLive Integer32,
|
|
rcIpNetToMediaRowStatus RowStatus,
|
|
rcIpNetToMediaDestIfIndex InterfaceIndex,
|
|
rcIpNetToMediaDestVlanId Integer32,
|
|
rcIpNetToMediaBMac MacAddress,
|
|
rcIpNetToMediaDestCvid Integer32
|
|
}
|
|
|
|
rcIpNetToMediaNetAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IpAddress corresponding to the media-
|
|
dependent `physical' address."
|
|
::= { rcIpNetToMediaEntry 1 }
|
|
|
|
rcIpNetToMediaIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface on which this entry's equivalence
|
|
is effective. The interface identified by a
|
|
particular value of this index is the same
|
|
interface as identified by the same value of
|
|
ifIndex."
|
|
::= { rcIpNetToMediaEntry 2 }
|
|
|
|
rcIpNetToMediaPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The media-dependent `physical' address."
|
|
::= { rcIpNetToMediaEntry 3 }
|
|
|
|
rcIpNetToMediaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
dynamic(2),
|
|
static(3),
|
|
local(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The is ARP entry type field."
|
|
::= { rcIpNetToMediaEntry 4 }
|
|
|
|
rcIpNetToMediaTimeToLive OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is TTL (time to live) field."
|
|
::= { rcIpNetToMediaEntry 5 }
|
|
|
|
rcIpNetToMediaRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Table row status."
|
|
::= { rcIpNetToMediaEntry 6 }
|
|
|
|
rcIpNetToMediaDestIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Destination IfIndex."
|
|
::= { rcIpNetToMediaEntry 7 }
|
|
|
|
rcIpNetToMediaDestVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4084)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Destination VlanId."
|
|
::= { rcIpNetToMediaEntry 8 }
|
|
|
|
rcIpNetToMediaBMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If the rcIpNetToMediaEntry is learned from a SPBM network,
|
|
instead of using port to track where the rcIpNetToMediaNetAddress
|
|
come from, the backbone MAC address is used to track that."
|
|
::= { rcIpNetToMediaEntry 9 }
|
|
|
|
rcIpNetToMediaDestCvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to identify customer vid of the switched uni port
|
|
of this entry is associated with. 4095 is not used. 4096
|
|
is reserved for untagged case."
|
|
::= { rcIpNetToMediaEntry 10}
|
|
|
|
--IP Gen Policy
|
|
|
|
rcIpGenPolicy OBJECT IDENTIFIER ::= { rcIp 100 }
|
|
|
|
-- Ip As Path Access List Table
|
|
|
|
rcIpAsPathAccessListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 1 }
|
|
|
|
rcIpAsPathAccessListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpAsPathAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP As Path Access List table"
|
|
::= { rcIpGenPolicy 2 }
|
|
|
|
rcIpAsPathAccessListEntry OBJECT-TYPE
|
|
SYNTAX RcIpAsPathAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip As Path Access List Table."
|
|
INDEX { rcIpAsPathAccessListId,
|
|
rcIpAsPathAccessListMemberId }
|
|
::= { rcIpAsPathAccessListTable 1 }
|
|
|
|
RcIpAsPathAccessListEntry ::=
|
|
SEQUENCE {
|
|
rcIpAsPathAccessListId INTEGER,
|
|
rcIpAsPathAccessListMemberId INTEGER,
|
|
rcIpAsPathAccessListMode INTEGER,
|
|
rcIpAsPathAccessListAsRegularExpression OCTET STRING,
|
|
rcIpAsPathAccessListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpAsPathAccessListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Path Access List entry Id."
|
|
::= { rcIpAsPathAccessListEntry 1 }
|
|
|
|
rcIpAsPathAccessListMemberId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "frq. at which hello sent."
|
|
::= { rcIpAsPathAccessListEntry 2 }
|
|
|
|
rcIpAsPathAccessListMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Path Access List Mode, permit or deny."
|
|
::= { rcIpAsPathAccessListEntry 3 }
|
|
|
|
rcIpAsPathAccessListAsRegularExpression OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP Path Access List Regular Expression"
|
|
::= { rcIpAsPathAccessListEntry 4 }
|
|
|
|
rcIpAsPathAccessListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Table row status."
|
|
::= { rcIpAsPathAccessListEntry 5 }
|
|
|
|
|
|
-- Ip Community Access List Table
|
|
|
|
rcIpCommunityAccessListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 3 }
|
|
|
|
rcIpCommunityAccessListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpCommunityAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP CommunityAccess List table"
|
|
::= { rcIpGenPolicy 4 }
|
|
|
|
rcIpCommunityAccessListEntry OBJECT-TYPE
|
|
SYNTAX RcIpCommunityAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip CommunityAccess List Table."
|
|
INDEX { rcIpCommunityAccessListId,
|
|
rcIpCommunityAccessListMemberId }
|
|
::= { rcIpCommunityAccessListTable 1 }
|
|
|
|
RcIpCommunityAccessListEntry ::=
|
|
SEQUENCE {
|
|
rcIpCommunityAccessListId INTEGER,
|
|
rcIpCommunityAccessListMemberId INTEGER,
|
|
rcIpCommunityAccessListMode INTEGER,
|
|
rcIpCommunityAccessListCommunity OCTET STRING,
|
|
rcIpCommunityAccessListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpCommunityAccessListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP CommunityAccess entry List Id"
|
|
::= { rcIpCommunityAccessListEntry 1 }
|
|
|
|
rcIpCommunityAccessListMemberId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "frq. at which hello sent."
|
|
::= { rcIpCommunityAccessListEntry 2 }
|
|
|
|
rcIpCommunityAccessListMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP Community Access List Mode, permit or deny."
|
|
::= { rcIpCommunityAccessListEntry 3 }
|
|
|
|
rcIpCommunityAccessListCommunity OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP Community Access List Community string."
|
|
::= { rcIpCommunityAccessListEntry 4 }
|
|
|
|
rcIpCommunityAccessListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP Community Access Table Row Status."
|
|
::= { rcIpCommunityAccessListEntry 5 }
|
|
|
|
-- Ip Access List Table
|
|
|
|
rcIpAccessListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 5 }
|
|
|
|
|
|
rcIpAccessListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Access List table"
|
|
::= { rcIpGenPolicy 6 }
|
|
|
|
rcIpAccessListEntry OBJECT-TYPE
|
|
SYNTAX RcIpAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Access List Table."
|
|
INDEX { rcIpAccessListId,
|
|
rcIpAccessListMode,
|
|
rcIpAccessListNetwork,
|
|
rcIpAccessListNetworkMask }
|
|
::= { rcIpAccessListTable 1 }
|
|
|
|
RcIpAccessListEntry ::=
|
|
SEQUENCE {
|
|
rcIpAccessListId INTEGER,
|
|
rcIpAccessListMode INTEGER,
|
|
rcIpAccessListNetwork IpAddress,
|
|
rcIpAccessListNetworkMask IpAddress,
|
|
rcIpAccessListName DisplayString,
|
|
rcIpAccessListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpAccessListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpAccessListEntry 1 }
|
|
|
|
rcIpAccessListMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpAccessListEntry 2 }
|
|
|
|
rcIpAccessListNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpAccessListEntry 3 }
|
|
|
|
rcIpAccessListNetworkMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpAccessListEntry 4 }
|
|
|
|
rcIpAccessListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpAccessListEntry 5 }
|
|
|
|
rcIpAccessListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpAccessListEntry 6 }
|
|
|
|
|
|
-- Ip Extended Access List Table
|
|
|
|
|
|
rcIpExtendedAccessListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 7 }
|
|
|
|
|
|
rcIpExtendedAccessListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpExtendedAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Extended Access List table"
|
|
::= { rcIpGenPolicy 8 }
|
|
|
|
rcIpExtendedAccessListEntry OBJECT-TYPE
|
|
SYNTAX RcIpExtendedAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Extended Access List Table."
|
|
INDEX { rcIpExtendedAccessListId,
|
|
rcIpExtendedAccessListMode,
|
|
rcIpExtendedAccessListNetwork,
|
|
rcIpExtendedAccessListNetworkWildCard,
|
|
rcIpExtendedAccessListNetworkMask,
|
|
rcIpExtendedAccessListNetworkMaskWildCard }
|
|
::= { rcIpExtendedAccessListTable 1 }
|
|
|
|
RcIpExtendedAccessListEntry ::=
|
|
SEQUENCE {
|
|
rcIpExtendedAccessListId INTEGER,
|
|
rcIpExtendedAccessListMode INTEGER,
|
|
rcIpExtendedAccessListNetwork IpAddress,
|
|
rcIpExtendedAccessListNetworkWildCard IpAddress,
|
|
rcIpExtendedAccessListNetworkMask IpAddress,
|
|
rcIpExtendedAccessListNetworkMaskWildCard IpAddress,
|
|
rcIpExtendedAccessListName DisplayString,
|
|
rcIpExtendedAccessListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpExtendedAccessListId OBJECT-TYPE
|
|
SYNTAX INTEGER (100..199)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpExtendedAccessListEntry 1 }
|
|
|
|
rcIpExtendedAccessListMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpExtendedAccessListEntry 2 }
|
|
|
|
rcIpExtendedAccessListNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpExtendedAccessListEntry 3 }
|
|
|
|
rcIpExtendedAccessListNetworkWildCard OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpExtendedAccessListEntry 4 }
|
|
|
|
rcIpExtendedAccessListNetworkMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpExtendedAccessListEntry 5 }
|
|
|
|
rcIpExtendedAccessListNetworkMaskWildCard OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpExtendedAccessListEntry 6 }
|
|
|
|
rcIpExtendedAccessListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpExtendedAccessListEntry 7 }
|
|
|
|
rcIpExtendedAccessListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpExtendedAccessListEntry 8 }
|
|
|
|
-- Ip Prefix List Table
|
|
|
|
rcIpPrefixListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 9 }
|
|
|
|
|
|
rcIpPrefixListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPrefixListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Prefix List table"
|
|
::= { rcIpGenPolicy 10 }
|
|
|
|
rcIpPrefixListEntry OBJECT-TYPE
|
|
SYNTAX RcIpPrefixListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Prefix List Table."
|
|
INDEX { rcIpPrefixListId,
|
|
rcIpPrefixListPrefix,
|
|
rcIpPrefixListPrefixMaskLen }
|
|
::= { rcIpPrefixListTable 1 }
|
|
|
|
RcIpPrefixListEntry ::=
|
|
SEQUENCE {
|
|
rcIpPrefixListId Integer32,
|
|
rcIpPrefixListPrefix IpAddress,
|
|
rcIpPrefixListPrefixMaskLen INTEGER,
|
|
rcIpPrefixListMaskLenFrom INTEGER,
|
|
rcIpPrefixListMaskLenUpto INTEGER,
|
|
rcIpPrefixListName DisplayString,
|
|
rcIpPrefixListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpPrefixListId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ListId"
|
|
::= { rcIpPrefixListEntry 1 }
|
|
|
|
rcIpPrefixListPrefix OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Is a member of a specific prefix list.
|
|
Adding the prefix to the given prefix list"
|
|
::= { rcIpPrefixListEntry 2 }
|
|
|
|
rcIpPrefixListPrefixMaskLen OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "prefix mask length"
|
|
::= { rcIpPrefixListEntry 3 }
|
|
|
|
rcIpPrefixListMaskLenFrom OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "used with mask len"
|
|
::= { rcIpPrefixListEntry 4 }
|
|
|
|
rcIpPrefixListMaskLenUpto OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "used with mask len"
|
|
::= { rcIpPrefixListEntry 5 }
|
|
|
|
rcIpPrefixListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "list name"
|
|
::= { rcIpPrefixListEntry 6 }
|
|
|
|
rcIpPrefixListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rcIpPrefixListEntry 7 }
|
|
|
|
|
|
-- Ip Prefix List Name Table
|
|
|
|
rcIpPrefixListNameTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 26 }
|
|
|
|
rcIpPrefixListNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpPrefixListNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Prefix List Name table"
|
|
::= { rcIpGenPolicy 27 }
|
|
|
|
rcIpPrefixListNameEntry OBJECT-TYPE
|
|
SYNTAX RcIpPrefixListNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Prefix List Name Table."
|
|
INDEX { rcIpPrefixListNameId }
|
|
::= { rcIpPrefixListNameTable 1 }
|
|
|
|
RcIpPrefixListNameEntry ::=
|
|
SEQUENCE {
|
|
rcIpPrefixListNameId Integer32,
|
|
rcIpPrefixListNameName DisplayString
|
|
}
|
|
|
|
rcIpPrefixListNameId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "list id"
|
|
::= { rcIpPrefixListNameEntry 1 }
|
|
|
|
rcIpPrefixListNameName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "list name"
|
|
::= { rcIpPrefixListNameEntry 2 }
|
|
|
|
|
|
-- Ip Route Policy Name Table
|
|
|
|
rcIpRoutePolicyNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRoutePolicyNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route Policy Name table for all VRFs"
|
|
::= { rcIpGenPolicy 28 }
|
|
|
|
rcIpRoutePolicyNameEntry OBJECT-TYPE
|
|
SYNTAX RcIpRoutePolicyNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Route Policy Name Table."
|
|
INDEX { rcIpRoutePolicyNameVrfId, rcIpRoutePolicyNameId }
|
|
::= { rcIpRoutePolicyNameTable 1 }
|
|
|
|
RcIpRoutePolicyNameEntry ::=
|
|
SEQUENCE {
|
|
rcIpRoutePolicyNameVrfId VrfIdentifier,
|
|
rcIpRoutePolicyNameId Integer32,
|
|
rcIpRoutePolicyNameName DisplayString
|
|
}
|
|
|
|
rcIpRoutePolicyNameVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "route policy vrfId"
|
|
::= { rcIpRoutePolicyNameEntry 1 }
|
|
|
|
rcIpRoutePolicyNameId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "route policy id"
|
|
::= { rcIpRoutePolicyNameEntry 2 }
|
|
|
|
rcIpRoutePolicyNameName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "route policy name"
|
|
::= { rcIpRoutePolicyNameEntry 3 }
|
|
|
|
|
|
-- Ip Route Policy Table
|
|
|
|
rcIpRoutePolicyTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 11 }
|
|
|
|
rcIpRoutePolicyApply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to apply Ip Route Policy"
|
|
::= { rcIpGenPolicy 12 }
|
|
|
|
rcIpRoutePolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRoutePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Route Map table"
|
|
::= { rcIpGenPolicy 13 }
|
|
|
|
rcIpRoutePolicyEntry OBJECT-TYPE
|
|
SYNTAX RcIpRoutePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Route Map Table."
|
|
INDEX { rcIpRoutePolicyId, rcIpRoutePolicySequenceNumber }
|
|
::= { rcIpRoutePolicyTable 1 }
|
|
|
|
RcIpRoutePolicyEntry ::=
|
|
SEQUENCE {
|
|
rcIpRoutePolicyId Integer32,
|
|
rcIpRoutePolicySequenceNumber Integer32,
|
|
rcIpRoutePolicyName DisplayString,
|
|
rcIpRoutePolicyEnable TruthValue,
|
|
rcIpRoutePolicyMode INTEGER,
|
|
rcIpRoutePolicyMatchProtocol INTEGER,
|
|
rcIpRoutePolicyMatchAsPath DisplayString,
|
|
rcIpRoutePolicyMatchCommunity DisplayString,
|
|
rcIpRoutePolicyMatchCommunityExact EnableValue,
|
|
rcIpRoutePolicyMatchNetwork RcLongDisplayString,
|
|
rcIpRoutePolicyMatchIpRouteSource RcLongDisplayString,
|
|
rcIpRoutePolicyMatchNextHop RcLongDisplayString,
|
|
rcIpRoutePolicyMatchInterface RcLongDisplayString,
|
|
rcIpRoutePolicyMatchRouteType INTEGER,
|
|
rcIpRoutePolicyMatchMetric INTEGER,
|
|
rcIpRoutePolicyMatchTag DisplayString,
|
|
rcIpRoutePolicySetRoutePreference INTEGER,
|
|
rcIpRoutePolicySetAsPath DisplayString,
|
|
rcIpRoutePolicySetAsPathMode INTEGER,
|
|
rcIpRoutePolicySetAutomaticTag EnableValue,
|
|
rcIpRoutePolicySetCommunityNumber DisplayString,
|
|
rcIpRoutePolicySetCommunityMode INTEGER,
|
|
rcIpRoutePolicySetMetricTypeInternal Integer32,
|
|
rcIpRoutePolicySetMetric INTEGER,
|
|
rcIpRoutePolicySetMetricType INTEGER,
|
|
rcIpRoutePolicySetNextHop IpAddress,
|
|
rcIpRoutePolicySetOrigin INTEGER,
|
|
rcIpRoutePolicySetLocalPref Integer32,
|
|
rcIpRoutePolicySetOriginEgpAs Integer32,
|
|
rcIpRoutePolicySetTag Integer32,
|
|
rcIpRoutePolicySetWeight Integer32,
|
|
rcIpRoutePolicySetInjectNetList DisplayString,
|
|
rcIpRoutePolicyRowStatus RowStatus,
|
|
rcIpRoutePolicySetMask IpAddress,
|
|
rcIpRoutePolicyNssaPbit EnableValue,
|
|
rcIpRoutePolicyMatchVrf IdList,
|
|
rcIpRoutePolicyMatchExtCommunity DisplayString,
|
|
rcIpRoutePolicySetExtCommunity DisplayString,
|
|
rcIpRoutePolicySetExtCommunityMode INTEGER,
|
|
rcIpRoutePolicyMatchLocalPref Integer32,
|
|
rcIpRoutePolicyMatchIpRouteDest RcLongDisplayString,
|
|
rcIpRoutePolicyMatchExtendedPref OCTET STRING,
|
|
rcIpRoutePolicyIpv6SetNextHop Ipv6Address,
|
|
rcIpRoutePolicyMatchMetricTypeIsis INTEGER,
|
|
rcIpRoutePolicySetMetricTypeIsis INTEGER,
|
|
rcIpRoutePolicySetMetricTypeBgp INTEGER
|
|
|
|
}
|
|
|
|
rcIpRoutePolicyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index used to identify a group of policies in
|
|
the route policy tableRoute map id"
|
|
::= { rcIpRoutePolicyEntry 1 }
|
|
|
|
rcIpRoutePolicySequenceNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "second index used to identify a specific policy
|
|
with in the route policy group (grouped by Id).
|
|
This field allows users to specify different
|
|
MATCH, SET parameters and an action."
|
|
::= { rcIpRoutePolicyEntry 2 }
|
|
|
|
rcIpRoutePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Is used to group a set of policies with different
|
|
sequence number. Id & Name have one-on-one
|
|
relationship. Different policy groups can
|
|
contain same sequence number, whereas with in
|
|
a group the sequence number must be different."
|
|
::= { rcIpRoutePolicyEntry 3 }
|
|
|
|
rcIpRoutePolicyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value specified here indicate whether
|
|
this policy is enabled or not. If
|
|
disabled policy sould not be used."
|
|
DEFVAL { false }
|
|
::= { rcIpRoutePolicyEntry 4 }
|
|
|
|
rcIpRoutePolicyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "specifies the action to be taken when this
|
|
policy is selected for a specific route.
|
|
This can be permit or deny or continue.
|
|
Permit indicates allow the route, deny indicates
|
|
ignore the route. Continue means continue
|
|
checking the next match criteria set in the
|
|
next policy seq, if none take the default action
|
|
in the given context."
|
|
DEFVAL { permit }
|
|
::= { rcIpRoutePolicyEntry 5 }
|
|
|
|
rcIpRoutePolicyMatchProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Match protocol. Used for RIP and DVMRP announce
|
|
policy only.
|
|
Value is one of multiple (logical 'OR)
|
|
of the following values:
|
|
direct(1),
|
|
static(2),
|
|
rip(4),
|
|
ospf(8),
|
|
ebgp(16),
|
|
dvmrp(32),
|
|
ibgp(64),
|
|
isis(128),
|
|
any(255)
|
|
direct(1): enables direct match-protocol
|
|
static(2): enables static match-protocol
|
|
rip(4): enables rip match-protocol
|
|
ospf(8): enables ospf match-protocol
|
|
ebgp(16): enables ebgp match-protocol
|
|
dvmrp(32): enables dvmrp match-protocol
|
|
ibgp(64): enables ibgp match-protocol
|
|
isis(128): enables isis match-protocol
|
|
any(255): enables all match-protocols"
|
|
DEFVAL {255}
|
|
::= { rcIpRoutePolicyEntry 6 }
|
|
|
|
-- Following between =begin =end is processed by mib_tools/extras.awk
|
|
-- =begin enum
|
|
-- rcIpRoutePolicyMatchProtocol direct 1
|
|
-- rcIpRoutePolicyMatchProtocol static 2
|
|
-- rcIpRoutePolicyMatchProtocol rip 4
|
|
-- rcIpRoutePolicyMatchProtocol ospf 8
|
|
-- rcIpRoutePolicyMatchProtocol ebgp 16
|
|
-- rcIpRoutePolicyMatchProtocol dvmrp 32
|
|
-- rcIpRoutePolicyMatchProtocol ibgp 64
|
|
-- rcIpRoutePolicyMatchProtocol isis 128
|
|
-- rcIpRoutePolicyMatchProtocol any 255
|
|
-- =end enum
|
|
|
|
rcIpRoutePolicyMatchAsPath OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Applicable to BGP protocol only. Match the BGP
|
|
autonomous system path. This will override the
|
|
BGP neighbor filter list info."
|
|
::= { rcIpRoutePolicyEntry 7 }
|
|
|
|
rcIpRoutePolicyMatchCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Applicable to BGP protocol only. Filter
|
|
incoming/outgoing updates based on communities."
|
|
::= { rcIpRoutePolicyEntry 8 }
|
|
|
|
rcIpRoutePolicyMatchCommunityExact OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If enabled indicates the match has be an exact
|
|
(i.e., all of the communities specified in the
|
|
path has to be matched)."
|
|
DEFVAL {disable}
|
|
::= { rcIpRoutePolicyEntry 9 }
|
|
|
|
rcIpRoutePolicyMatchNetwork OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..259))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "can specify one or more prefix list name or id(s)"
|
|
DEFVAL {""}
|
|
::= { rcIpRoutePolicyEntry 10 }
|
|
|
|
rcIpRoutePolicyMatchIpRouteSource OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..259))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "In case of Rip routes this is equivalent to
|
|
RipInterface. In case of DVMRP routes this is
|
|
equivalent to DVMRP gateway. Can specify one
|
|
or more prefix list name(s) or id(s) seperated by comma."
|
|
DEFVAL {""}
|
|
::= { rcIpRoutePolicyEntry 11 }
|
|
|
|
rcIpRoutePolicyMatchNextHop OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..259))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "In case of Rip routes this is equivalent to
|
|
RipInterface. In case of DVMRP routes this is
|
|
equivalent to DVMRP gateway. Can specify one
|
|
or more prefix list name(s) or id(s) seperated by comma."
|
|
DEFVAL {""}
|
|
::= { rcIpRoutePolicyEntry 12 }
|
|
|
|
rcIpRoutePolicyMatchInterface OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..259))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Match received interface. Only for rip routes.
|
|
Ignored in all other cases."
|
|
DEFVAL {""}
|
|
::= { rcIpRoutePolicyEntry 13 }
|
|
|
|
rcIpRoutePolicyMatchRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
any(0),
|
|
local(1),
|
|
internal(2),
|
|
external(3),
|
|
externaltype1(4),
|
|
externaltype2(5),
|
|
level1(6),
|
|
level2(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "For BGP this choice refers to locally generated
|
|
routes external routes learned via ebgp nbr. For
|
|
OSPF internal refers to intra and inter area
|
|
routes (belongs to local autonomous system).
|
|
External (type1|type2) refers to the routes
|
|
learned from other ASs and imported as either
|
|
type1 or type2. if type1/type2 is specified
|
|
then match only type1/type2."
|
|
DEFVAL {any}
|
|
::= { rcIpRoutePolicyEntry 14 }
|
|
|
|
rcIpRoutePolicyMatchMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Match mec field in the incoming advertisement."
|
|
DEFVAL { 0 }
|
|
::= { rcIpRoutePolicyEntry 15 }
|
|
|
|
rcIpRoutePolicyMatchTag OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "specifies a list of tag(s), that will be used
|
|
during the match criteria process.contains one
|
|
or more tag values.."
|
|
::= { rcIpRoutePolicyEntry 16 }
|
|
|
|
rcIpRoutePolicySetRoutePreference OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "if non-zero specifies the route preference
|
|
value to be assigned to the routes that applies
|
|
this policy.contains one or more tag values.."
|
|
::= { rcIpRoutePolicyEntry 17 }
|
|
|
|
rcIpRoutePolicySetAsPath OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The AS path vaule to be used whether the
|
|
SetAsPathMode is Tag or Prepend.as-path string.."
|
|
::= { rcIpRoutePolicyEntry 18 }
|
|
|
|
rcIpRoutePolicySetAsPathMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tag(1),
|
|
prepend(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "It can be either tag or prepend tag.
|
|
applicable only while redistributing routes to
|
|
BGP.Converts the tag of a route into AS path."
|
|
DEFVAL {prepend}
|
|
::= { rcIpRoutePolicyEntry 19 }
|
|
|
|
rcIpRoutePolicySetAutomaticTag OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL {disable}
|
|
::= { rcIpRoutePolicyEntry 20 }
|
|
|
|
rcIpRoutePolicySetCommunityNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "this value can be a number (1..42949672000)
|
|
or no-export or no-advertise. Applicable to
|
|
BGP advertisments.community number."
|
|
::= { rcIpRoutePolicyEntry 21 }
|
|
|
|
rcIpRoutePolicySetCommunityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unchanged(0),
|
|
none(1),
|
|
append(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "this value can be either append or none
|
|
unchanged - keep the community attribute in the
|
|
route path as it is.
|
|
none - remove the community in the route path
|
|
additive - adds the community-number specified
|
|
in SetCommunityNumber to the
|
|
community list attribute. Applicable
|
|
to BGP advertisments."
|
|
DEFVAL {unchanged}
|
|
::= { rcIpRoutePolicyEntry 22 }
|
|
|
|
rcIpRoutePolicySetMetricTypeInternal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates to set the MED value for routes
|
|
advertised to ebgp nbrs to the IGP metric value."
|
|
DEFVAL {0}
|
|
::= { rcIpRoutePolicyEntry 23 }
|
|
|
|
rcIpRoutePolicySetMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value of the metric to be used while sending an
|
|
update for the routes that match the matching
|
|
criteria in this route policy.
|
|
Default - 0 indicates the internal value defined
|
|
for protocol"
|
|
DEFVAL { 0 }
|
|
::= { rcIpRoutePolicyEntry 24 }
|
|
|
|
rcIpRoutePolicySetMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1),
|
|
type2(2),
|
|
internal(3),
|
|
external(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Metric type for the routes to be imported into
|
|
OSPF routing protocol, which passed the matching
|
|
criteria configured in this route policy."
|
|
DEFVAL { type2 }
|
|
::= { rcIpRoutePolicyEntry 25 }
|
|
|
|
rcIpRoutePolicySetNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IpAddress of the next hop router. Ignored for
|
|
DVMRP routes."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcIpRoutePolicyEntry 26 }
|
|
|
|
rcIpRoutePolicySetOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unchanged(0),
|
|
igp(1),
|
|
egp(2),
|
|
incomplete(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "igp/egp/incomplete Applicable to BGP protocol
|
|
only. If not set uses the route origin from
|
|
the Ip routing table (protocol)."
|
|
DEFVAL {unchanged}
|
|
::= { rcIpRoutePolicyEntry 27 }
|
|
|
|
rcIpRoutePolicySetLocalPref OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "this value will be used during route decision
|
|
process in the BGP protocol. Applicable to BGP
|
|
only."
|
|
DEFVAL {0}
|
|
::= { rcIpRoutePolicyEntry 28 }
|
|
|
|
rcIpRoutePolicySetOriginEgpAs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "indicates the Remote autonomous sys number.
|
|
Applicable to BGP only."
|
|
DEFVAL {0}
|
|
::= { rcIpRoutePolicyEntry 29 }
|
|
|
|
rcIpRoutePolicySetTag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value to be used for setting tag of the
|
|
destination routing protocol. If not specified
|
|
forward the tag value in the source routing
|
|
protocol. Value 0 indicates not set"
|
|
DEFVAL {0}
|
|
::= { rcIpRoutePolicyEntry 30 }
|
|
|
|
rcIpRoutePolicySetWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Should be using with match as-path condition.
|
|
Weight value for the routing table. For BGP
|
|
this value will override the weight configured
|
|
through NetworkTableEntry or FilterListWeight or
|
|
NeighborWeight. Used for BGP only.Value 0
|
|
indicates not set"
|
|
DEFVAL {0}
|
|
::= { rcIpRoutePolicyEntry 31 }
|
|
|
|
rcIpRoutePolicySetInjectNetList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "specifies the prefix list to be used either
|
|
for injecting the routes into the routing
|
|
table or to include the networks in the
|
|
advertisement. Ignored for DVMRP."
|
|
DEFVAL {""}
|
|
::= { rcIpRoutePolicyEntry 32 }
|
|
|
|
rcIpRoutePolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rcIpRoutePolicyEntry 33 }
|
|
|
|
rcIpRoutePolicySetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set Mask Ip Address"
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcIpRoutePolicyEntry 34 }
|
|
|
|
rcIpRoutePolicyNssaPbit OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set/Reset P bit in specified type 7 LSA.
|
|
By default P bit is always set in case user
|
|
set it to disable state for particular route
|
|
policy than all type 7 LSAs associated with
|
|
that route policy will have P bit cleared,
|
|
with this intact NSSA ABR will not perform
|
|
translation of these LSAs to type 5."
|
|
DEFVAL { enable }
|
|
::= { rcIpRoutePolicyEntry 35 }
|
|
|
|
rcIpRoutePolicyMatchVrf OBJECT-TYPE
|
|
SYNTAX IdList (SIZE (0..1024))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An array used to identify which source VRFs have leaked
|
|
routes to the local VRF"
|
|
::= { rcIpRoutePolicyEntry 36 }
|
|
|
|
rcIpRoutePolicyMatchExtCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Filter incoming/outgoing updates based on communities"
|
|
::= { rcIpRoutePolicyEntry 37 }
|
|
|
|
rcIpRoutePolicySetExtCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Set Extended-community string."
|
|
::= { rcIpRoutePolicyEntry 38 }
|
|
|
|
rcIpRoutePolicySetExtCommunityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
append(0),
|
|
unchanged(1),
|
|
overwrite(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This value can be either additive, unchanged or overwrite."
|
|
::= { rcIpRoutePolicyEntry 39}
|
|
|
|
rcIpRoutePolicyMatchLocalPref OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Match Local Prefix value."
|
|
::= { rcIpRoutePolicyEntry 40}
|
|
|
|
rcIpRoutePolicyMatchIpRouteDest OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..259))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "to match route destination, one can specify one
|
|
or more prefix list name(s) or id(s) separated by comma."
|
|
DEFVAL {""}
|
|
::= { rcIpRoutePolicyEntry 41 }
|
|
|
|
rcIpRoutePolicyMatchExtendedPref OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(1..1027))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To associate extended ACL(access control list) with the route policy.
|
|
User can associate one or multiple extended ACLs."
|
|
::= { rcIpRoutePolicyEntry 42}
|
|
|
|
rcIpRoutePolicyIpv6SetNextHop OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Address of the ipv6 next hop router. Ignored for
|
|
DVMRP routes."
|
|
::= { rcIpRoutePolicyEntry 43 }
|
|
|
|
rcIpRoutePolicyMatchMetricTypeIsis OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
any(1),
|
|
internal(2),
|
|
external(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Match metric type field in the incoming ISIS routes in accept policy."
|
|
DEFVAL { any }
|
|
::= { rcIpRoutePolicyEntry 44 }
|
|
|
|
rcIpRoutePolicySetMetricTypeIsis OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
internal(2),
|
|
external(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set Metric type ISIS."
|
|
DEFVAL { none }
|
|
::= { rcIpRoutePolicyEntry 45 }
|
|
|
|
rcIpRoutePolicySetMetricTypeBgp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
liveMetric(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set Metric type BGP."
|
|
DEFVAL { none }
|
|
::= { rcIpRoutePolicyEntry 46 }
|
|
|
|
-- Ip Redistribute Table
|
|
|
|
rcIpRedistributeTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 14 }
|
|
|
|
rcIpRedistributeApply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Apply Ip Redistribution"
|
|
DEFVAL { false }
|
|
::= { rcIpGenPolicy 15 }
|
|
|
|
rcIpRedistributeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRedistributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Redistribute table"
|
|
::= { rcIpGenPolicy 16 }
|
|
|
|
rcIpRedistributeEntry OBJECT-TYPE
|
|
SYNTAX RcIpRedistributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Redistribute Table."
|
|
INDEX { rcIpRedistributeProtocol,
|
|
rcIpRedistributeRouteSource }
|
|
::= { rcIpRedistributeTable 1 }
|
|
|
|
RcIpRedistributeEntry ::=
|
|
SEQUENCE {
|
|
rcIpRedistributeProtocol INTEGER,
|
|
rcIpRedistributeRouteSource INTEGER,
|
|
rcIpRedistributeEnable EnableValue,
|
|
rcIpRedistributeMetric INTEGER,
|
|
rcIpRedistributeMetricType INTEGER,
|
|
rcIpRedistributeMatchRouteType INTEGER,
|
|
rcIpRedistributeSetTag Integer32,
|
|
rcIpRedistributeSubnets INTEGER,
|
|
rcIpRedistributeRoutePolicy DisplayString,
|
|
rcIpRedistributeASNumber Integer32,
|
|
rcIpRedistributeWeight Integer32,
|
|
rcIpRedistributeDefaultOriginate Integer32,
|
|
rcIpRedistributeRowStatus RowStatus,
|
|
rcIpRedistributeLevel INTEGER
|
|
}
|
|
|
|
rcIpRedistributeProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ospf(1),
|
|
bgp(2),
|
|
isis(3),
|
|
ospfv3(4),
|
|
vrf-ext(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Protocol is any one of the dynamic routing
|
|
protocol, which is interested in receiving
|
|
the external routing info."
|
|
::= { rcIpRedistributeEntry 1 }
|
|
|
|
rcIpRedistributeRouteSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
direct(1),
|
|
static(2),
|
|
rip(3),
|
|
ospf(4),
|
|
bgp(5),
|
|
isis(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "equivalent to the owner field in the routing
|
|
table. This field indicates that the protocol
|
|
is interested in knowing/not-knowing the routes
|
|
learned from this source."
|
|
::= { rcIpRedistributeEntry 2 }
|
|
|
|
rcIpRedistributeEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable. By default this is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcIpRedistributeEntry 3 }
|
|
|
|
rcIpRedistributeMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "value of the metric to be announced in the
|
|
advertisment.
|
|
The Range specified is the range for ISIS
|
|
for other protocols range is (0 .. 65535)"
|
|
DEFVAL { 0 }
|
|
::= { rcIpRedistributeEntry 4 }
|
|
|
|
rcIpRedistributeMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1),
|
|
type2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "specifies the type of the metric type, useful
|
|
for OSPF and BGP only. In case of ISIS
|
|
type1 is treated as internal and type2 is
|
|
treated as external"
|
|
DEFVAL { type2 }
|
|
::= { rcIpRedistributeEntry 5 }
|
|
|
|
rcIpRedistributeMatchRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal(1),
|
|
external1(2),
|
|
external2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "used to filter a route based on the route type.
|
|
applicable to BGP."
|
|
::= { rcIpRedistributeEntry 6 }
|
|
|
|
rcIpRedistributeSetTag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Tag value to be set in the advertisment."
|
|
::= { rcIpRedistributeEntry 7 }
|
|
|
|
rcIpRedistributeSubnets OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allow(1),
|
|
supress(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "applicable to OSPF only. Indicates that all the
|
|
subnets need to be advertised individually."
|
|
DEFVAL { allow }
|
|
::= { rcIpRedistributeEntry 8 }
|
|
|
|
rcIpRedistributeRoutePolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "specify the route policy to achieve the final
|
|
granularity in filtering to determine whether
|
|
or not a specific route should be advertised
|
|
to the given protocol.Route map name"
|
|
::= { rcIpRedistributeEntry 9 }
|
|
|
|
rcIpRedistributeASNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Autonomous system number. Used only for the
|
|
BGP protocol."
|
|
::= { rcIpRedistributeEntry 10 }
|
|
|
|
rcIpRedistributeWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "used only for the BGP protocol."
|
|
::= { rcIpRedistributeEntry 11 }
|
|
|
|
rcIpRedistributeDefaultOriginate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "indicates the given protocol will
|
|
originate/advertise a default route."
|
|
::= { rcIpRedistributeEntry 12 }
|
|
|
|
rcIpRedistributeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rcIpRedistributeEntry 13 }
|
|
|
|
rcIpRedistributeLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is for ISIS only this sets the redistribute
|
|
level. Set this to level2 to distribute
|
|
the routes in L2 LSPs if the router is at level1
|
|
then setting redistribute at level2 does not have
|
|
any significance."
|
|
::= { rcIpRedistributeEntry 14 }
|
|
|
|
|
|
-- IP Ospf In Filter Table
|
|
|
|
rcIpOspfInFilterTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 17 }
|
|
|
|
rcIpOspfInFilterApply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to Apply Ip Ospf In Filter"
|
|
::= { rcIpGenPolicy 18 }
|
|
|
|
rcIpOspfInFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpOspfInFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Ospf In Filter table"
|
|
::= { rcIpGenPolicy 19 }
|
|
|
|
rcIpOspfInFilterEntry OBJECT-TYPE
|
|
SYNTAX RcIpOspfInFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Ospf In Filter Table."
|
|
INDEX { rcIpOspfInFilterAdvertisingRtr }
|
|
::= { rcIpOspfInFilterTable 1 }
|
|
|
|
RcIpOspfInFilterEntry ::=
|
|
SEQUENCE {
|
|
rcIpOspfInFilterAdvertisingRtr IpAddress,
|
|
rcIpOspfInFilterEnable EnableValue,
|
|
rcIpOspfInFilterMetricType INTEGER,
|
|
rcIpOspfInFilterPolicyName DisplayString,
|
|
rcIpOspfInFilterRowStatus RowStatus
|
|
}
|
|
|
|
rcIpOspfInFilterAdvertisingRtr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpOspfInFilterEntry 1 }
|
|
|
|
rcIpOspfInFilterEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IfIndex"
|
|
DEFVAL { disable }
|
|
::= { rcIpOspfInFilterEntry 2 }
|
|
|
|
rcIpOspfInFilterMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1),
|
|
type2(2),
|
|
any(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { any }
|
|
::= { rcIpOspfInFilterEntry 3 }
|
|
|
|
rcIpOspfInFilterPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpOspfInFilterEntry 4 }
|
|
|
|
rcIpOspfInFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIpOspfInFilterEntry 5 }
|
|
|
|
|
|
-- Ip Route Pref Table
|
|
|
|
|
|
rcIpRoutePrefTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 20 }
|
|
|
|
rcIpRoutePrefTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRoutePrefEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Route Pref table"
|
|
::= { rcIpGenPolicy 21 }
|
|
|
|
rcIpRoutePrefEntry OBJECT-TYPE
|
|
SYNTAX RcIpRoutePrefEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Route Pref Table."
|
|
INDEX { rcIpRoutePrefProtocol }
|
|
::= { rcIpRoutePrefTable 1 }
|
|
|
|
RcIpRoutePrefEntry ::=
|
|
SEQUENCE {
|
|
rcIpRoutePrefProtocol INTEGER,
|
|
rcIpRoutePrefDefault INTEGER,
|
|
rcIpRoutePrefConfigured INTEGER
|
|
}
|
|
|
|
rcIpRoutePrefProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
static(2),
|
|
mpls(3),
|
|
ospfIntra(4),
|
|
ospfInter(5),
|
|
isisLevel1(6),
|
|
isisLevel2(7),
|
|
ebgp(8),
|
|
rip(9),
|
|
ospfExternal1(10),
|
|
ospfExternal2(11),
|
|
ibgp(12),
|
|
staticv6(13),
|
|
ospfv3Intra(14),
|
|
ospfv3Inter(15),
|
|
ospfv3External1(16),
|
|
ospfv3External2(17),
|
|
spbmLevel1(18),
|
|
spbmv6Level1(19)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Protocol"
|
|
::= { rcIpRoutePrefEntry 1 }
|
|
|
|
rcIpRoutePrefDefault OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Shows the default preference value for the given
|
|
protocol."
|
|
::= { rcIpRoutePrefEntry 2 }
|
|
|
|
rcIpRoutePrefConfigured OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value is configurable by the user"
|
|
::= { rcIpRoutePrefEntry 3 }
|
|
|
|
-- Redistribute table
|
|
|
|
rcIpRedistributeInterVrfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpRedistributeInterVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Redistribute table for Inter-VRFs"
|
|
::= { rcIpGenPolicy 22 }
|
|
|
|
rcIpRedistributeInterVrfEntry OBJECT-TYPE
|
|
SYNTAX RcIpRedistributeInterVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Redistribute Table.(new) "
|
|
INDEX { rcIpRedistributeInterVrfDstVrfId,
|
|
rcIpRedistributeInterVrfProtocol,
|
|
rcIpRedistributeInterVrfSrcVrfId,
|
|
rcIpRedistributeInterVrfRouteSource }
|
|
::= { rcIpRedistributeInterVrfTable 1 }
|
|
|
|
RcIpRedistributeInterVrfEntry ::=
|
|
SEQUENCE {
|
|
rcIpRedistributeInterVrfDstVrfId VrfIdentifier,
|
|
rcIpRedistributeInterVrfProtocol INTEGER,
|
|
rcIpRedistributeInterVrfSrcVrfId VrfIdentifier,
|
|
rcIpRedistributeInterVrfRouteSource INTEGER,
|
|
rcIpRedistributeInterVrfEnable EnableValue,
|
|
rcIpRedistributeInterVrfMetric INTEGER,
|
|
rcIpRedistributeInterVrfMetricType INTEGER,
|
|
rcIpRedistributeInterVrfMatchRouteType INTEGER,
|
|
rcIpRedistributeInterVrfSetTag Integer32,
|
|
rcIpRedistributeInterVrfSubnets INTEGER,
|
|
rcIpRedistributeInterVrfRoutePolicy DisplayString,
|
|
rcIpRedistributeInterVrfASNumber Integer32,
|
|
rcIpRedistributeInterVrfWeight Integer32,
|
|
rcIpRedistributeInterVrfDefaultOriginate Integer32,
|
|
rcIpRedistributeInterVrfRowStatus RowStatus
|
|
}
|
|
|
|
rcIpRedistributeInterVrfDstVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "dst VRF id used in the redistribution"
|
|
::= { rcIpRedistributeInterVrfEntry 1 }
|
|
|
|
rcIpRedistributeInterVrfProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ospf(1),
|
|
bgp(2),
|
|
isis(3),
|
|
vrf-ext(4),
|
|
extranet(5),
|
|
rip(6),
|
|
ospfv3(10),
|
|
bgpv6(11),
|
|
isisv6(12),
|
|
ripng(13),
|
|
dvr(14)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Protocol is any one of the dynamic routing
|
|
protocol, which is interested in receiving
|
|
the external routing info."
|
|
::= { rcIpRedistributeInterVrfEntry 2 }
|
|
|
|
rcIpRedistributeInterVrfSrcVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "src VRF id used in the redistribution"
|
|
::= { rcIpRedistributeInterVrfEntry 3 }
|
|
|
|
rcIpRedistributeInterVrfRouteSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
direct(1),
|
|
static(2),
|
|
rip(3),
|
|
ospf(4),
|
|
bgp(5),
|
|
extranet(6),
|
|
v6direct(10),
|
|
v6static(11),
|
|
ospfv3(12),
|
|
isis(13),
|
|
v6isis(14),
|
|
v6bgp(15),
|
|
ripng(16),
|
|
dvr(17)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "equivalent to the owner field in the routing
|
|
table. This field indicates that the protocol
|
|
is interested in knowing/not-knowing the routes
|
|
learned from this source."
|
|
::= { rcIpRedistributeInterVrfEntry 4 }
|
|
|
|
rcIpRedistributeInterVrfEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable. By default this is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcIpRedistributeInterVrfEntry 5 }
|
|
|
|
|
|
rcIpRedistributeInterVrfMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "value of the metric to be announced in the
|
|
advertisment"
|
|
DEFVAL { 0 }
|
|
::= { rcIpRedistributeInterVrfEntry 6 }
|
|
|
|
rcIpRedistributeInterVrfMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1(1),
|
|
type2(2),
|
|
live(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "specifies the type of the metric type, useful
|
|
for OSPF and BGP only."
|
|
DEFVAL { type2 }
|
|
::= { rcIpRedistributeInterVrfEntry 7 }
|
|
|
|
rcIpRedistributeInterVrfMatchRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal(1),
|
|
external1(2),
|
|
external2(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "used to filter a route based on the route type.
|
|
applicable to BGP."
|
|
::= { rcIpRedistributeInterVrfEntry 8 }
|
|
|
|
|
|
rcIpRedistributeInterVrfSetTag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Tag value to be set in the advertisment."
|
|
::= { rcIpRedistributeInterVrfEntry 9 }
|
|
|
|
rcIpRedistributeInterVrfSubnets OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allow(1),
|
|
suppress(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "applicable to OSPF only. Indicates that all the
|
|
subnets need to be advertised individually."
|
|
DEFVAL { allow }
|
|
::= { rcIpRedistributeInterVrfEntry 10 }
|
|
|
|
rcIpRedistributeInterVrfRoutePolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "specify the route policy to achieve the final
|
|
granularity in filtering to determine whether
|
|
or not a specific route should be advertised
|
|
to the given protocol.Route map name"
|
|
::= { rcIpRedistributeInterVrfEntry 11 }
|
|
|
|
rcIpRedistributeInterVrfASNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Autonomous system number. Used only for the
|
|
BGP protocol."
|
|
::= { rcIpRedistributeInterVrfEntry 12 }
|
|
|
|
rcIpRedistributeInterVrfWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "used only for the BGP protocol."
|
|
::= { rcIpRedistributeInterVrfEntry 13 }
|
|
|
|
rcIpRedistributeInterVrfDefaultOriginate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "indicates the given protocol will
|
|
originate/advertise a default route."
|
|
::= { rcIpRedistributeInterVrfEntry 14 }
|
|
|
|
--IpExtCommunityList Table
|
|
|
|
rcIpExtCommunityAccessListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP Extended Community Access List table size."
|
|
::= {rcIpGenPolicy 23 }
|
|
|
|
rcIpExtCommunityAccessListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpExtCommunityAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Extended Community Access List table."
|
|
::= {rcIpGenPolicy 24 }
|
|
|
|
rcIpExtCommunityAccessListEntry OBJECT-TYPE
|
|
SYNTAX RcIpExtCommunityAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Extended Community Access List Table."
|
|
INDEX { rcIpExtCommunityAccessListId,
|
|
rcIpExtCommunityAccessListMemberId }
|
|
::= { rcIpExtCommunityAccessListTable 1 }
|
|
|
|
RcIpExtCommunityAccessListEntry ::=
|
|
SEQUENCE {
|
|
rcIpExtCommunityAccessListId INTEGER,
|
|
rcIpExtCommunityAccessListMemberId INTEGER,
|
|
rcIpExtCommunityAccessListRTType INTEGER,
|
|
rcIpExtCommunityAccessListRTAddress IpAddress,
|
|
rcIpExtCommunityAccessListRTAsNumber INTEGER,
|
|
rcIpExtCommunityAccessListRTAssignedNum Unsigned32,
|
|
rcIpExtCommunityAccessListSooType INTEGER,
|
|
rcIpExtCommunityAccessListSooAddress IpAddress,
|
|
rcIpExtCommunityAccessListSooAsNumber INTEGER,
|
|
rcIpExtCommunityAccessListSooAssignedNum Unsigned32,
|
|
rcIpExtCommunityAccessListVrfId VrfIdentifier,
|
|
rcIpExtCommunityAccessListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpExtCommunityAccessListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP extended Community Access List Id"
|
|
::= { rcIpExtCommunityAccessListEntry 1 }
|
|
|
|
rcIpExtCommunityAccessListMemberId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Member Id for the extended-community list to be added"
|
|
::= { rcIpExtCommunityAccessListEntry 2 }
|
|
|
|
rcIpExtCommunityAccessListRTType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
asnum(1),
|
|
ipaddr(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The route target Type for IP Extended Community rule in the list"
|
|
DEFVAL {asnum}
|
|
::= { rcIpExtCommunityAccessListEntry 3 }
|
|
|
|
rcIpExtCommunityAccessListRTAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Extended community Ip address for the route-target type entry."
|
|
::= { rcIpExtCommunityAccessListEntry 4 }
|
|
|
|
rcIpExtCommunityAccessListRTAsNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Extended community Asnumber for the route-target type entry."
|
|
::= { rcIpExtCommunityAccessListEntry 5 }
|
|
|
|
rcIpExtCommunityAccessListRTAssignedNum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Extended community assigned number for the route-target type entry."
|
|
::= { rcIpExtCommunityAccessListEntry 6 }
|
|
|
|
rcIpExtCommunityAccessListSooType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
asnum(1),
|
|
ipaddr(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The site of origin Type for IP Extended Community Access List"
|
|
DEFVAL {asnum}
|
|
::= { rcIpExtCommunityAccessListEntry 7 }
|
|
|
|
rcIpExtCommunityAccessListSooAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " Extended community Ip address for the site-of-origin type of entry."
|
|
::= { rcIpExtCommunityAccessListEntry 8 }
|
|
|
|
rcIpExtCommunityAccessListSooAsNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " Extended community AsNumber for the site-of-origin type of entry."
|
|
::= { rcIpExtCommunityAccessListEntry 9 }
|
|
|
|
rcIpExtCommunityAccessListSooAssignedNum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " Extended community assigned number for the site-of-origin type of entry."
|
|
::= { rcIpExtCommunityAccessListEntry 10 }
|
|
|
|
|
|
rcIpExtCommunityAccessListVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "VrfId for the extended-community Access list."
|
|
::= { rcIpExtCommunityAccessListEntry 11 }
|
|
|
|
rcIpExtCommunityAccessListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP Ext Community Table Row Status."
|
|
::= { rcIpExtCommunityAccessListEntry 12 }
|
|
|
|
rcIpRedistributeInterVrfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rcIpRedistributeInterVrfEntry 15 }
|
|
|
|
--
|
|
-- The IP Extended ACL Table (Added by PanBin 5088423)
|
|
--
|
|
|
|
rcIpExtACLTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpExtACLEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains list of extended ACL (access control list) configuration.
|
|
The extended ACL is used to filter SA (Source-Active) messages by matching
|
|
both the source and destination address fields of a given packet."
|
|
::= { rcIpGenPolicy 25 }
|
|
|
|
-- New Ipv4 Route Pref Table
|
|
|
|
rcIpNewRoutePrefTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpGenPolicy 29 }
|
|
|
|
rcIpNewRoutePrefTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpNewRoutePrefEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "New IPv4 Route Pref table. This table and
|
|
rcIpv6RoutePrefTable are designed
|
|
to obsolete the rcIpRoutePrefTable"
|
|
::= { rcIpGenPolicy 30 }
|
|
|
|
rcIpNewRoutePrefEntry OBJECT-TYPE
|
|
SYNTAX RcIpNewRoutePrefEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of New Ipv4 Route Pref Table."
|
|
INDEX { rcIpNewRoutePrefDefaultValue}
|
|
::= { rcIpNewRoutePrefTable 1 }
|
|
|
|
RcIpNewRoutePrefEntry ::=
|
|
SEQUENCE {
|
|
rcIpNewRoutePrefDefaultValue Integer32,
|
|
rcIpNewRoutePrefProtocol INTEGER,
|
|
rcIpNewRoutePrefConfiguredValue Integer32
|
|
}
|
|
|
|
rcIpNewRoutePrefDefaultValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Shows the default preference value for the given
|
|
protocol."
|
|
::= { rcIpNewRoutePrefEntry 1 }
|
|
|
|
rcIpNewRoutePrefProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
static(2),
|
|
mpls(3),
|
|
ospfIntra(4),
|
|
ospfInter(5),
|
|
isisLevel1(6),
|
|
isisLevel2(7),
|
|
ebgp(8),
|
|
rip(9),
|
|
ospfExternal1(10),
|
|
ospfExternal2(11),
|
|
ibgp(12),
|
|
spbmLevel1(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Protocol name"
|
|
::= { rcIpNewRoutePrefEntry 2 }
|
|
|
|
rcIpNewRoutePrefConfiguredValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value is configurable by the user"
|
|
::= { rcIpNewRoutePrefEntry 3 }
|
|
|
|
rcIpExtACLEntry OBJECT-TYPE
|
|
SYNTAX RcIpExtACLEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing a prefix of an ACL list.
|
|
The ACL list is identified by the ACL name. User can add one
|
|
or multiple prefixes to an ACL list. Empty ACL list is not allowed."
|
|
INDEX { rcIpExtACLPrefixSourceAddr, rcIpExtACLPrefixSourceMask,
|
|
rcIpExtACLPrefixDestinationAddr, rcIpExtACLPrefixDestinationMask,
|
|
rcIpExtACLPrefixName}
|
|
::= { rcIpExtACLTable 1 }
|
|
|
|
RcIpExtACLEntry ::= SEQUENCE {
|
|
rcIpExtACLPrefixSourceAddr IpAddress,
|
|
rcIpExtACLPrefixSourceMask IpAddress,
|
|
rcIpExtACLPrefixDestinationAddr IpAddress,
|
|
rcIpExtACLPrefixDestinationMask IpAddress,
|
|
rcIpExtACLPrefixName SnmpAdminString,
|
|
rcIpExtACLPrefixRowStatus RowStatus
|
|
}
|
|
|
|
rcIpExtACLPrefixSourceAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the source address of the prefix."
|
|
::= { rcIpExtACLEntry 1 }
|
|
|
|
rcIpExtACLPrefixSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the source mask of the prefix."
|
|
::= { rcIpExtACLEntry 2 }
|
|
|
|
rcIpExtACLPrefixDestinationAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the destination address of the prefix."
|
|
::= { rcIpExtACLEntry 3 }
|
|
|
|
rcIpExtACLPrefixDestinationMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a destination mask of the prefix."
|
|
::= { rcIpExtACLEntry 4 }
|
|
|
|
rcIpExtACLPrefixName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the extended ACL list to which the prefixes belongs.
|
|
An extended ACL list must have one prefix at least."
|
|
::= { rcIpExtACLEntry 5 }
|
|
|
|
rcIpExtACLPrefixRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to create/delete prefixes from ACL list."
|
|
::= { rcIpExtACLEntry 6 }
|
|
|
|
|
|
-- Ip BGP
|
|
|
|
|
|
rcIpBgp OBJECT IDENTIFIER ::= { rcIp 101 }
|
|
|
|
rcIpBgpGeneralGroup OBJECT IDENTIFIER ::= { rcIpBgp 1 }
|
|
|
|
rcIpBgpGeneralGroupLocalAs OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Local Autonomous system number"
|
|
::= { rcIpBgpGeneralGroup 1 }
|
|
|
|
rcIpBgpGeneralGroupAdminStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Disable or Enable group administrative"
|
|
DEFVAL { enable }
|
|
::= { rcIpBgpGeneralGroup 2 }
|
|
|
|
rcIpBgpGeneralGroupDefaultMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The default-metric is used in conjunction with
|
|
the redistribute router configuration command to cause
|
|
the bgp routing protocol to use this metric as MED"
|
|
DEFVAL { -1 }
|
|
::= { rcIpBgpGeneralGroup 3 }
|
|
|
|
rcIpBgpGeneralGroupDefaultLocalPreference OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Default local preference attribute value to be used "
|
|
DEFVAL {100}
|
|
::= { rcIpBgpGeneralGroup 4 }
|
|
|
|
rcIpBgpGeneralGroupDefaultInformationOriginate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "allows the redistribution of network 0.0.0.0 into BGP"
|
|
DEFVAL {false}
|
|
::= { rcIpBgpGeneralGroup 5 }
|
|
|
|
rcIpBgpGeneralGroupBestPathMissingAsWorst OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable to consider a missing MED attribute in a path
|
|
as having a value of infinity, making the path without a
|
|
MED value the least desirable path. To return the router
|
|
to the default (assign a value of 0 to the missing MED),
|
|
set the value to disable."
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpGeneralGroup 6 }
|
|
|
|
rcIpBgpGeneralGroupBestPathMedConfed OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable MED comparison among paths learned from
|
|
confederation peers. Disable to prevent considering
|
|
the MED attribute in comparing paths"
|
|
DEFVAL {disable}
|
|
::= { rcIpBgpGeneralGroup 7 }
|
|
|
|
rcIpBgpGeneralGroupIgnoreIllegalRouterId OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configures BGP to overlook an illegal router ID.
|
|
Enables or disable accepting a connection from a peer
|
|
that sends its open message with a router ID of 0."
|
|
DEFVAL {disable}
|
|
::= { rcIpBgpGeneralGroup 8 }
|
|
|
|
rcIpBgpGeneralGroupAlwaysCompareMed OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable to allow the comparison of the Multi Exit
|
|
Discriminator (MED) for paths from neighbors in
|
|
different autonomous systems."
|
|
DEFVAL {disable}
|
|
::= { rcIpBgpGeneralGroup 9 }
|
|
|
|
rcIpBgpGeneralGroupAutoPeerRestart OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable the feature that automatically restarts the
|
|
connection to a BGP peer when the connection goes down."
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpGeneralGroup 10 }
|
|
|
|
rcIpBgpGeneralGroupAutoSummary OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable BGP to summarize networks based on class limlts
|
|
(Class A,B,C networks)."
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpGeneralGroup 11 }
|
|
|
|
rcIpBgpGeneralGroupSynchronization OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables and disables the router from accepting routes
|
|
from BGP peers without waiting for an update from the
|
|
IBGP."
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpGeneralGroup 12 }
|
|
|
|
rcIpBgpGeneralGroupMaxEqualcostRoutes OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Sets the number of maximum number of equal-cost routes
|
|
that can be stored in the routing table."
|
|
DEFVAL {1}
|
|
::= { rcIpBgpGeneralGroup 13 }
|
|
|
|
rcIpBgpGeneralGroupIbgpReportImportRoute OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configure BGP to report imported routes to an interior
|
|
BGP peer."
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpGeneralGroup 14 }
|
|
|
|
rcIpBgpGeneralGroupAggregate OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpGeneralGroup 15 }
|
|
|
|
rcIpBgpGeneralGroupFlapDampEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabled or Disabled"
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpGeneralGroup 16 }
|
|
|
|
rcIpBgpGeneralGroupDebugMask OBJECT-TYPE
|
|
SYNTAX Integer32 (0..511)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " value is one of multiple (logically by 'OR' of
|
|
following value:
|
|
none (0),
|
|
error(1),
|
|
packet(2),
|
|
event(4),
|
|
trace(8),
|
|
warning(16),
|
|
state(32),
|
|
init(64),
|
|
filter(128),
|
|
update(256),
|
|
all(511)
|
|
all(511): Enables all debugging messages.
|
|
none(0): Disables all debugging messages.
|
|
error(1): Enables disolay of debug error messages.
|
|
packet(2): Enables display of debug packet messages.
|
|
event(4): Enables display of debug event messages.
|
|
trace(8): Enables display debug trace messages.
|
|
warning(16): Enables display debug warning messages.
|
|
state(32): Enables display of debug state transtion
|
|
messages.
|
|
init(64): Enables display of debug initialization
|
|
messages.
|
|
filter(128): Enables display of debug messages related
|
|
to filtering.
|
|
update(256): Enables display of debug messages related
|
|
to sending and receiving updates."
|
|
DEFVAL { 0 }
|
|
::= { rcIpBgpGeneralGroup 17 }
|
|
|
|
|
|
-- Following between =begin =end is processed by mib_tools/extras.awk
|
|
|
|
|
|
-- =begin enum
|
|
-- rcIpBgpGeneralGroupDebugMask none 0
|
|
-- rcIpBgpGeneralGroupDebugMask error 1
|
|
-- rcIpBgpGeneralGroupDebugMask packet 2
|
|
-- rcIpBgpGeneralGroupDebugMask event 4
|
|
-- rcIpBgpGeneralGroupDebugMask trace 8
|
|
-- rcIpBgpGeneralGroupDebugMask warning 16
|
|
-- rcIpBgpGeneralGroupDebugMask state 32
|
|
-- rcIpBgpGeneralGroupDebugMask init 64
|
|
-- rcIpBgpGeneralGroupDebugMask filter 128
|
|
-- rcIpBgpGeneralGroupDebugMask update 256
|
|
-- rcIpBgpGeneralGroupDebugMask all 511
|
|
-- =end enum
|
|
|
|
rcIpBgpGeneralGroupTrapEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpGeneralGroup 18 }
|
|
|
|
rcIpBgpGeneralGroupQuickStart OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable the flag to avoid flap penalty and trigger
|
|
the peer start event quickly"
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpGeneralGroup 19 }
|
|
|
|
rcIpBgpGeneralGroupDeterministicMed OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable to allow the comparison of the Multi Exit
|
|
Discriminator (MED) for paths from neighbors in
|
|
same autonomous system."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpGeneralGroup 20 }
|
|
|
|
rcIpBgpGeneralGroupRouteRefresh OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Route Refresh for Bgp."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpGeneralGroup 21 }
|
|
|
|
rcIpBgpGeneralGroupRoutePolicyIn OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Route Policy Name that will be applied to all
|
|
routes which enter the VRF table."
|
|
::= { rcIpBgpGeneralGroup 22 }
|
|
|
|
rcIpBgpGeneralGroupRoutePolicyOut OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Route policy name that will be applied to all routes which are sent out of this VRF instance."
|
|
::= { rcIpBgpGeneralGroup 23 }
|
|
|
|
rcIpBgpGeneralGroupDefaultInformationOriginateIpv6 OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "allows the redistribution of default ipv6
|
|
network into BGP"
|
|
DEFVAL {false}
|
|
::= { rcIpBgpGeneralGroup 24 }
|
|
|
|
rcIpBgpGeneralGroupNewLocalAs OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Local Autonomous system number"
|
|
::= { rcIpBgpGeneralGroup 25 }
|
|
|
|
rcIpBgpGeneralGroup4ByteAs OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "4 Byte As number enable"
|
|
::= { rcIpBgpGeneralGroup 26 }
|
|
|
|
rcIpBgpGeneralGroupAsDot OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "As number in Dot format"
|
|
::= { rcIpBgpGeneralGroup 27 }
|
|
|
|
rcIpBgpGeneralGroupIdentifier OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The BGP Identifier of local system."
|
|
::= { rcIpBgpGeneralGroup 28 }
|
|
|
|
rcIpBgpAggregateTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Size of Aggregate Table"
|
|
::= { rcIpBgp 2 }
|
|
|
|
rcIpBgpAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "To specify the list of aggregate prefixes to be
|
|
created by the BGP routing process and the options
|
|
to be used while aggregating."
|
|
::= { rcIpBgp 3 }
|
|
|
|
rcIpBgpAggregateEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpBgp Aggregate Address In Table."
|
|
INDEX { rcIpBgpAggregateAddress,
|
|
rcIpBgpAggregateMask }
|
|
::= { rcIpBgpAggregateTable 1 }
|
|
|
|
RcIpBgpAggregateEntry ::=
|
|
SEQUENCE {
|
|
rcIpBgpAggregateAddress IpAddress,
|
|
rcIpBgpAggregateMask IpAddress,
|
|
rcIpBgpAggregateAsSetGenerate EnableValue,
|
|
rcIpBgpAggregateSummaryOnly EnableValue,
|
|
rcIpBgpAggregateSuppressPolicy DisplayString,
|
|
rcIpBgpAggregateAdvertisePolicy DisplayString,
|
|
rcIpBgpAggregateAttributePolicy DisplayString,
|
|
rcIpBgpAggregateRowStatus RowStatus
|
|
}
|
|
|
|
rcIpBgpAggregateAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Prefix to create an aggregate address in BGP routing table."
|
|
::= { rcIpBgpAggregateEntry 1 }
|
|
|
|
rcIpBgpAggregateMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mask for the aggregrate"
|
|
::= { rcIpBgpAggregateEntry 2 }
|
|
|
|
rcIpBgpAggregateAsSetGenerate OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable Generates autonomous system set path
|
|
information."
|
|
DEFVAL {disable}
|
|
::= { rcIpBgpAggregateEntry 3 }
|
|
|
|
rcIpBgpAggregateSummaryOnly OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Filters all more specific routes from updates."
|
|
DEFVAL {disable}
|
|
::= { rcIpBgpAggregateEntry 4 }
|
|
|
|
rcIpBgpAggregateSuppressPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of route policy used to select the
|
|
routes to be suppressed."
|
|
::= { rcIpBgpAggregateEntry 5 }
|
|
|
|
rcIpBgpAggregateAdvertisePolicy OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of route policy used to select the
|
|
routes to create AS-SET origin communities."
|
|
::= { rcIpBgpAggregateEntry 6 }
|
|
|
|
rcIpBgpAggregateAttributePolicy OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of route policy used to set the
|
|
attribute of the aggregate route."
|
|
::= { rcIpBgpAggregateEntry 7 }
|
|
|
|
rcIpBgpAggregateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete."
|
|
::= { rcIpBgpAggregateEntry 8 }
|
|
|
|
rcIpBgpConfederationGroup OBJECT IDENTIFIER ::= { rcIpBgp 4 }
|
|
|
|
rcIpBgpConfederationIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Deprecated. Use rcIpBgpConfederationASIdentifier instead."
|
|
::= { rcIpBgpConfederationGroup 1 }
|
|
|
|
rcIpBgpConfederationPeers OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The string represents ConfederatoinPeers as <length,
|
|
value>. Maximum size 255,if any, will not be recorded
|
|
by this object.
|
|
The length is a 1-octet field containing the numbner
|
|
of peers in the value field.
|
|
The value field contains one or more peers (AS numbers
|
|
which are part of the confederation).
|
|
Each AS is represented in the octet
|
|
string as a pair of octets according to the
|
|
following algorithm:
|
|
first-byte-of-pair = (ASNumber & 0xff000000)>>24;
|
|
second-byte-of-pair = (ASNumber & 0x00ff0000)>>16;
|
|
third-byte-of-pair = (ASNumber & 0x0000ff00)>>8;
|
|
fourth-byte-of-pair = (ASNumber & 0x000000ff);"
|
|
::= { rcIpBgpConfederationGroup 2 }
|
|
|
|
rcIpBgpConfederationASIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Confederation AS identifier"
|
|
::= { rcIpBgpConfederationGroup 3 }
|
|
|
|
rcIpBgpRouteReflectorGroup OBJECT IDENTIFIER ::= { rcIpBgp 5 }
|
|
|
|
rcIpBgpRouteReflectionEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable Route Reflection on this router"
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpRouteReflectorGroup 1 }
|
|
|
|
rcIpBgpRouteReflectorClusterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Cluster ID of this router acting as a route reflector"
|
|
::= { rcIpBgpRouteReflectorGroup 2 }
|
|
|
|
rcIpBgpRouteReflectorClientToClientReflection OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this router is configured as a route reflector, and
|
|
the clients are fully meshed, a Disable value disables
|
|
reflection of routes from one client to another."
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpRouteReflectorGroup 3 }
|
|
|
|
rcIpBgpRouteReflectionOperState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays the current route reflection operational state"
|
|
::= { rcIpBgpRouteReflectorGroup 4 }
|
|
|
|
|
|
rcIpBgpNetworkTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Network Prefix table size"
|
|
::= { rcIpBgp 6 }
|
|
|
|
rcIpBgpNetworkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpNetworkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "The networks in this table are either static/directly
|
|
connected or learned routes. Bgp advertises these
|
|
network provided they are reachable and are in the IP
|
|
routing table"
|
|
::= { rcIpBgp 7 }
|
|
|
|
rcIpBgpNetworkEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpNetworkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry In NetworkTable."
|
|
INDEX { rcIpBgpNetworkAddr,
|
|
rcIpBgpNetworkMask }
|
|
::= { rcIpBgpNetworkTable 1 }
|
|
|
|
RcIpBgpNetworkEntry ::=
|
|
SEQUENCE {
|
|
rcIpBgpNetworkAddr IpAddress,
|
|
rcIpBgpNetworkMask IpAddress,
|
|
rcIpBgpNetworkRowStatus RowStatus,
|
|
rcIpBgpNetworkMetric INTEGER
|
|
}
|
|
|
|
rcIpBgpNetworkAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Network prefix that BGP will advertise."
|
|
::= { rcIpBgpNetworkEntry 1 }
|
|
|
|
rcIpBgpNetworkMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Network mask"
|
|
::= { rcIpBgpNetworkEntry 2 }
|
|
|
|
rcIpBgpNetworkRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete."
|
|
::= { rcIpBgpNetworkEntry 3 }
|
|
|
|
rcIpBgpNetworkMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value of the metric to be used while sending
|
|
an update for the routes from the network table.
|
|
Indicates to set the MED value for the routes
|
|
advertised to ebgp peers."
|
|
DEFVAL { 0 }
|
|
::= { rcIpBgpNetworkEntry 4 }
|
|
|
|
|
|
-- Bgp Peer Table
|
|
|
|
rcIpBgpPeerTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "BGP peer table size"
|
|
::= { rcIpBgp 8 }
|
|
|
|
rcIpBgpPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "IP BGP Peer table"
|
|
::= { rcIpBgp 9 }
|
|
|
|
rcIpBgpPeerEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip rcIpBgp Peer Table."
|
|
INDEX { rcIpBgpPeerIpAddress }
|
|
::= { rcIpBgpPeerTable 1 }
|
|
|
|
RcIpBgpPeerEntry ::=
|
|
SEQUENCE {
|
|
rcIpBgpPeerEnable INTEGER,
|
|
rcIpBgpPeerIpAddress IpAddress,
|
|
rcIpBgpPeerRemoteAs INTEGER,
|
|
rcIpBgpPeerGroupName DisplayString,
|
|
rcIpBgpPeerDefaultOriginate EnableValue,
|
|
rcIpBgpPeerEbgpMultiHop EnableValue,
|
|
rcIpBgpPeerAdvertisementInterval INTEGER,
|
|
rcIpBgpPeerPassword DisplayString,
|
|
rcIpBgpPeerWeight INTEGER,
|
|
rcIpBgpPeerMaxPrefix INTEGER,
|
|
rcIpBgpPeerNextHopSelf TruthValue,
|
|
rcIpBgpPeerRoutePolicyIn DisplayString,
|
|
rcIpBgpPeerRoutePolicyOut DisplayString,
|
|
rcIpBgpPeerRouteReflectorClient TruthValue,
|
|
rcIpBgpPeerSoftReconfigurationIn EnableValue,
|
|
rcIpBgpPeerSoftReconfiguration INTEGER,
|
|
rcIpBgpPeerRemovePrivateAs EnableValue,
|
|
rcIpBgpPeerRowStatus RowStatus,
|
|
rcIpBgpPeerMD5Authentication EnableValue,
|
|
rcIpBgpPeerDebugMask INTEGER,
|
|
rcIpBgpPeerSendCommunity EnableValue,
|
|
rcIpBgpPeerUpdateSourceInterface IpAddress,
|
|
-- OM 2.0 place holder
|
|
rcIpBgpPeerBgpMplsCutThroughType INTEGER,
|
|
rcIpBgpPeerBgpMplsCutThroughId INTEGER,
|
|
rcIpBgpPeerState INTEGER,
|
|
rcIpBgpPeerLastError OCTET STRING,
|
|
rcIpBgpPeerVpnv4Address EnableValue,
|
|
rcIpBgpPeerIpvpnLiteCap EnableValue,
|
|
rcIpBgpPeerSooAddress IpAddress,
|
|
rcIpBgpPeerSooAsNumber INTEGER,
|
|
rcIpBgpPeerSooAssignedNum Unsigned32,
|
|
rcIpBgpPeerSooType INTEGER,
|
|
rcIpBgpPeerRouteRefresh EnableValue,
|
|
rcIpBgpPeerAsOverride EnableValue,
|
|
rcIpBgpPeerAllowAsIn INTEGER,
|
|
rcIpBgpPeerBfdEnable EnableValue
|
|
}
|
|
|
|
rcIpBgpPeerEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable: controls whether the peer connection is enabled
|
|
or disabled"
|
|
DEFVAL { disabled }
|
|
::= { rcIpBgpPeerEntry 1 }
|
|
|
|
rcIpBgpPeerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Ip address of this peer"
|
|
::= { rcIpBgpPeerEntry 2 }
|
|
|
|
rcIpBgpPeerRemoteAs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Remote Autonomous system number of this peer"
|
|
::= { rcIpBgpPeerEntry 3 }
|
|
|
|
rcIpBgpPeerGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Peer group name to which this peer belongs (optional)"
|
|
::= { rcIpBgpPeerEntry 4 }
|
|
|
|
rcIpBgpPeerDefaultOriginate OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To allow a BGP speaker (the local router) to send
|
|
the default route 0.0.0.0 to a neighbor for use as
|
|
a default route"
|
|
DEFVAL {disable}
|
|
::= { rcIpBgpPeerEntry 5 }
|
|
|
|
rcIpBgpPeerEbgpMultiHop OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To accept and attempt BGP connections to external
|
|
peers residing on networks that are not directly
|
|
connected"
|
|
DEFVAL {disable}
|
|
::= { rcIpBgpPeerEntry 6 }
|
|
|
|
rcIpBgpPeerAdvertisementInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (5..120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set the minimum interval between the sending of
|
|
BGP routing updates Time in seconds. Integer from 5
|
|
to 120."
|
|
DEFVAL { 30 }
|
|
::= { rcIpBgpPeerEntry 7 }
|
|
|
|
rcIpBgpPeerPassword OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable MD5 authentication on a TCP connection
|
|
between two BGP peers Case-sensitive password of
|
|
up to 80 character"
|
|
::= { rcIpBgpPeerEntry 8 }
|
|
|
|
rcIpBgpPeerWeight OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To assign an absolute weight to a BGP network.
|
|
It can be an integer from 0 to 65535."
|
|
DEFVAL { 100 }
|
|
::= { rcIpBgpPeerEntry 9 }
|
|
|
|
rcIpBgpPeerMaxPrefix OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Sets a limit on the number of routes that will be
|
|
accepted from a neighbor. A value of zero indicates no
|
|
limit"
|
|
DEFVAL {12000}
|
|
::= { rcIpBgpPeerEntry 10 }
|
|
|
|
rcIpBgpPeerNextHopSelf OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set NextHop Attribute to local router address before
|
|
sending updates to remote peer"
|
|
DEFVAL { false }
|
|
::= { rcIpBgpPeerEntry 11 }
|
|
|
|
rcIpBgpPeerRoutePolicyIn OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Route Policy Name that will be applied to all networks
|
|
learned from this peer"
|
|
::= { rcIpBgpPeerEntry 12 }
|
|
|
|
rcIpBgpPeerRoutePolicyOut OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Route policy name that will be applied to all outgoing
|
|
updates"
|
|
::= { rcIpBgpPeerEntry 13 }
|
|
|
|
rcIpBgpPeerRouteReflectorClient OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether this peer is a route reflector client."
|
|
DEFVAL {false}
|
|
::= { rcIpBgpPeerEntry 14 }
|
|
|
|
rcIpBgpPeerSoftReconfigurationIn OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If Peer soft reconfiguration is enabled in the in-bound
|
|
direction, policy can be changed and routes can
|
|
re-learned without having to reset the bgp connection.
|
|
Enabling soft reconfig-in causes all bgp routes to be
|
|
stored in local memory (even non-best routes)"
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpPeerEntry 15 }
|
|
|
|
rcIpBgpPeerSoftReconfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
in (1),
|
|
out(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If rcIpBgpPeerSoftReconfigurationIn is enabled in the
|
|
in-bound direction, policy can be changed and routes can
|
|
re-learned without having to reset the bgp connection by
|
|
setting rcIpBgpPeerSoftReconfiguration to in(1). Setting
|
|
the value to out (2) forces the neighbor to send out all
|
|
the updates to the remote neighbor without resetting the
|
|
connection."
|
|
DEFVAL {none}
|
|
::= { rcIpBgpPeerEntry 16 }
|
|
|
|
rcIpBgpPeerRemovePrivateAs OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable and disable private AS number from being
|
|
stripped when sending an update"
|
|
DEFVAL { enable }
|
|
::= { rcIpBgpPeerEntry 17 }
|
|
|
|
rcIpBgpPeerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the Table."
|
|
::= { rcIpBgpPeerEntry 18 }
|
|
|
|
rcIpBgpPeerMD5Authentication OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable and Disable MD5 authentication"
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerEntry 19 }
|
|
|
|
rcIpBgpPeerDebugMask OBJECT-TYPE
|
|
SYNTAX INTEGER (0..511)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " value is one of multiple (logically by 'OR' of
|
|
following value:
|
|
none (0),
|
|
error(1),
|
|
packet(2),
|
|
event(4),
|
|
trace(8),
|
|
warning(16),
|
|
state(32),
|
|
init(64),
|
|
filter(128),
|
|
update(256),
|
|
all(511)
|
|
all(511): Enables all debugging messages.
|
|
none(0): Disables all debugging messages.
|
|
error(1): Enables disolay of debug error messages.
|
|
packet(2): Enables display of debug packet messages.
|
|
event(4): Enables display of debug event messages.
|
|
trace(8): Enables display debug trace messages.
|
|
warning(16): Enables display debug warning messages.
|
|
state(32): Enables display of debug state transtion
|
|
messages.
|
|
init(64): Enables display of debug initialization
|
|
messages.
|
|
filter(128): Enables display of debug messages related
|
|
to filtering.
|
|
update(256): Enables display of debug messages related
|
|
to sending and receiving updates."
|
|
DEFVAL { 0 }
|
|
::= { rcIpBgpPeerEntry 20 }
|
|
|
|
-- Following between =begin =end is processed by mib_tools/extras.awk
|
|
-- =begin enum
|
|
-- rcIpBgpPeerDebugMask none 0
|
|
-- rcIpBgpPeerDebugMask error 1
|
|
-- rcIpBgpPeerDebugMask packet 2
|
|
-- rcIpBgpPeerDebugMask event 4
|
|
-- rcIpBgpPeerDebugMask trace 8
|
|
-- rcIpBgpPeerDebugMask warning 16
|
|
-- rcIpBgpPeerDebugMask state 32
|
|
-- rcIpBgpPeerDebugMask init 64
|
|
-- rcIpBgpPeerDebugMask filter 128
|
|
-- rcIpBgpPeerDebugMask update 256
|
|
-- rcIpBgpPeerDebugMask all 511
|
|
-- =end enum
|
|
|
|
rcIpBgpPeerSendCommunity OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerEntry 21 }
|
|
|
|
rcIpBgpPeerUpdateSourceInterface OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address to be used for Circuitless IP."
|
|
::= { rcIpBgpPeerEntry 22 }
|
|
|
|
rcIpBgpPeerBgpMplsCutThroughType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
lsp(1),
|
|
lspgroup(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies whether the BGP to MPLS cut through being
|
|
used is an LSP or an LSP group."
|
|
::= { rcIpBgpPeerEntry 23 }
|
|
|
|
rcIpBgpPeerBgpMplsCutThroughId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The ID of LSP or LSP group being used for BGP to MPLS
|
|
cut through."
|
|
::= { rcIpBgpPeerEntry 24 }
|
|
|
|
rcIpBgpPeerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
connect(2),
|
|
active(3),
|
|
opensent(4),
|
|
openconfirm(5),
|
|
established(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGP peer connection state."
|
|
::= { rcIpBgpPeerEntry 25 }
|
|
|
|
rcIpBgpPeerLastError OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last error code and subcode seen by this
|
|
peer on this connection. If no error has
|
|
occurred, this field is zero. Otherwise, the
|
|
first byte of this two byte OCTET STRING
|
|
contains the error code, and the second byte
|
|
contains the subcode."
|
|
::= { rcIpBgpPeerEntry 26 }
|
|
|
|
rcIpBgpPeerVpnv4Address OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " The vpnv4 routes specified."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerEntry 27 }
|
|
|
|
rcIpBgpPeerIpvpnLiteCap OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The IPVPN-lite capability can be enabled or disabled on
|
|
the bgp neighbor peer."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerEntry 28 }
|
|
|
|
rcIpBgpPeerSooAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " The site-of-origin ip address."
|
|
::= { rcIpBgpPeerEntry 29 }
|
|
|
|
rcIpBgpPeerSooAsNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The asnum for the site-of-origin for bgp peer."
|
|
::= { rcIpBgpPeerEntry 30}
|
|
|
|
rcIpBgpPeerSooAssignedNum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Assigned number required along with asnum or
|
|
address to configure the site-of-origin for bgp peer."
|
|
::= { rcIpBgpPeerEntry 31}
|
|
|
|
rcIpBgpPeerSooType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
asnum(1),
|
|
ipaddr(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " The soo type can be asnum or ipaddress."
|
|
::= { rcIpBgpPeerEntry 32}
|
|
|
|
rcIpBgpPeerRouteRefresh OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route refresh for bgp peer."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerEntry 33 }
|
|
|
|
|
|
rcIpBgpPeerAsOverride OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The AS Override value can be enabled or disabled for bgp peer."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerEntry 34}
|
|
|
|
rcIpBgpPeerAllowAsIn OBJECT-TYPE
|
|
SYNTAX INTEGER(0..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The number of as-in allowed for bgp peer "
|
|
::= { rcIpBgpPeerEntry 35}
|
|
|
|
rcIpBgpPeerBfdEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "BFD Admin state flag."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerEntry 36 }
|
|
|
|
-- IP rcIpBgp Peer Group Table
|
|
|
|
rcIpBgpPeerGroupTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BGP Peer Group table size"
|
|
::= { rcIpBgp 10 }
|
|
|
|
rcIpBgpPeerGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpPeerGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP rcIpBgp Peer Group table. This table contains rows
|
|
which are template configuration parameters which are
|
|
shared by a group of peers. Peers belonging to the
|
|
same group will refer to the same row in this table
|
|
using a peer group name"
|
|
::= { rcIpBgp 11 }
|
|
|
|
rcIpBgpPeerGroupEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpPeerGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip rcIpBgp Peer Group Table."
|
|
INDEX { rcIpBgpPeerGroupIndex }
|
|
::= { rcIpBgpPeerGroupTable 1 }
|
|
|
|
RcIpBgpPeerGroupEntry ::=
|
|
SEQUENCE {
|
|
rcIpBgpPeerGroupEnable EnableValue,
|
|
rcIpBgpPeerGroupIndex Integer32,
|
|
rcIpBgpPeerGroupGroupName DisplayString,
|
|
rcIpBgpPeerGroupRemoteAs Integer32,
|
|
rcIpBgpPeerGroupDefaultOriginate INTEGER,
|
|
rcIpBgpPeerGroupEbgpMultiHop INTEGER,
|
|
rcIpBgpPeerGroupAdvertisementInterval Integer32,
|
|
rcIpBgpPeerGroupKeepAlive Integer32,
|
|
rcIpBgpPeerGroupHoldTime Integer32,
|
|
rcIpBgpPeerGroupWeight Integer32,
|
|
rcIpBgpPeerGroupMaxPrefix Integer32,
|
|
rcIpBgpPeerGroupNextHopSelf TruthValue,
|
|
rcIpBgpPeerGroupRoutePolicyIn DisplayString,
|
|
rcIpBgpPeerGroupRoutePolicyOut DisplayString,
|
|
rcIpBgpPeerGroupRouteReflectorClient TruthValue,
|
|
rcIpBgpPeerGroupSoftReconfigurationIn EnableValue,
|
|
rcIpBgpPeerGroupSoftReconfiguration INTEGER,
|
|
rcIpBgpPeerGroupPassword DisplayString,
|
|
rcIpBgpPeerGroupRemovePrivateAs EnableValue,
|
|
rcIpBgpPeerGroupRowStatus RowStatus,
|
|
rcIpBgpPeerGroupMD5Authentication EnableValue,
|
|
rcIpBgpPeerGroupSendCommunity EnableValue,
|
|
rcIpBgpPeerGroupUpdateSourceInterface IpAddress,
|
|
rcIpBgpPeerGroupVpnv4Address EnableValue,
|
|
rcIpBgpPeerGroupIpvpnLiteCap EnableValue,
|
|
rcIpBgpPeerGroupSooAddress IpAddress,
|
|
rcIpBgpPeerGroupSooAsNumber Integer32,
|
|
rcIpBgpPeerGroupSooAssignedNum Unsigned32,
|
|
rcIpBgpPeerGroupSooType INTEGER,
|
|
rcIpBgpPeerGroupRouteRefresh EnableValue,
|
|
rcIpBgpPeerGroupAsOverride EnableValue,
|
|
rcIpBgpPeerGroupAllowAsIn Integer32,
|
|
rcIpBgpPeerGroupDefaultOriginateIpv6 TruthValue,
|
|
rcIpBgpPeerGroupAfUpdateSourceInterfaceType InetAddressType,
|
|
rcIpBgpPeerGroupAfUpdateSourceInterface InetAddress,
|
|
rcIpBgpPeerGroupIpv6Cap EnableValue,
|
|
rcIpBgpPeerGroupIpv6RoutePolicyIn DisplayString,
|
|
rcIpBgpPeerGroupIpv6RoutePolicyOut DisplayString,
|
|
rcIpBgpPeerGroupBfdEnable TruthValue,
|
|
rcIpBgpPeerGroupDebugMask INTEGER,
|
|
rcIpBgpPeerGroupIpv6MaxPrefix Integer32
|
|
}
|
|
|
|
rcIpBgpPeerGroupEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Allows disabling a group of peers"
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 1 }
|
|
|
|
rcIpBgpPeerGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1024)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index in to the Peer Group Table"
|
|
DEFVAL {1}
|
|
::= { rcIpBgpPeerGroupEntry 2 }
|
|
|
|
rcIpBgpPeerGroupGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Name of the BGP peer group to which this neighbor belong"
|
|
::= { rcIpBgpPeerGroupEntry 3 }
|
|
|
|
rcIpBgpPeerGroupRemoteAs OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Remote Autonomous system number of this peer group
|
|
(optional)"
|
|
::= { rcIpBgpPeerGroupEntry 4 }
|
|
|
|
rcIpBgpPeerGroupDefaultOriginate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enabling this attribute allows a BGP speaker
|
|
(the local router) to send the default route 0.0.0.0 to
|
|
the group of neighbors for use as a default route."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 5 }
|
|
|
|
rcIpBgpPeerGroupEbgpMultiHop OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To accept and attempt BGP connections to external
|
|
peers residing on networks that are not directly
|
|
connected"
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 6 }
|
|
|
|
rcIpBgpPeerGroupAdvertisementInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (5..120)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To set the minimum interval between the sending of
|
|
BGP routing updates Time in seconds. Integer from 1
|
|
to 120."
|
|
DEFVAL {30}
|
|
::= { rcIpBgpPeerGroupEntry 7 }
|
|
|
|
rcIpBgpPeerGroupKeepAlive OBJECT-TYPE
|
|
SYNTAX Integer32 (0..21845)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To set the time interval in seconds between the sending
|
|
of BGP keep alive messages to remote peers."
|
|
DEFVAL {60}
|
|
::= { rcIpBgpPeerGroupEntry 8 }
|
|
|
|
rcIpBgpPeerGroupHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To configure the hold time for the group of peers in
|
|
seconds. Usually set to three times the value of the
|
|
Keepalive time"
|
|
DEFVAL {180}
|
|
::= { rcIpBgpPeerGroupEntry 9 }
|
|
|
|
rcIpBgpPeerGroupWeight OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To assign an absolute weight to a BGP network.
|
|
Absolute weight, or importance.
|
|
It can be an integer from 0 to 65535."
|
|
DEFVAL {100}
|
|
::= { rcIpBgpPeerGroupEntry 10 }
|
|
|
|
rcIpBgpPeerGroupMaxPrefix OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Sets a limit on the number of routes that will be
|
|
accepted from this group of neighbors. A value of zero
|
|
indicates no limit"
|
|
DEFVAL {12000}
|
|
::= { rcIpBgpPeerGroupEntry 11 }
|
|
|
|
rcIpBgpPeerGroupNextHopSelf OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Set NextHop Attribute to local router address before
|
|
sending updates to remote peers"
|
|
DEFVAL { false }
|
|
::= { rcIpBgpPeerGroupEntry 12 }
|
|
|
|
rcIpBgpPeerGroupRoutePolicyIn OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route Policy Name that will be applied to all networks
|
|
learned from this group of peers"
|
|
::= { rcIpBgpPeerGroupEntry 13 }
|
|
|
|
rcIpBgpPeerGroupRoutePolicyOut OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route policy name that will be applied to all
|
|
outgoing updates to this group of peers"
|
|
::= { rcIpBgpPeerGroupEntry 14 }
|
|
|
|
rcIpBgpPeerGroupRouteReflectorClient OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether this group of peers is a route reflector client."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpPeerGroupEntry 15 }
|
|
|
|
rcIpBgpPeerGroupSoftReconfigurationIn OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "If Peer soft reconfiguration is enabled in the in bound
|
|
direction, policy can be changed and routes can
|
|
re-learned without having to reset the bgp connection.
|
|
Enabling soft reconfig-in causes all bgp routes to be
|
|
stored in local memory (even non-best routes)"
|
|
DEFVAL {enable}
|
|
::= { rcIpBgpPeerGroupEntry 16 }
|
|
|
|
rcIpBgpPeerGroupSoftReconfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
in (1),
|
|
out(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If Peer soft reconfiguration-in is enabled in the in
|
|
bound direction, policy can be changed and routes can
|
|
re-learned without having to reset the bgp connection by
|
|
setting rcIpBgpPeerGroupSoftReconfiguration to in(1).
|
|
Setting the value to out (2) forces the neighbor to send
|
|
out all the updates to the remote neighbor without
|
|
resetting the connection."
|
|
::= { rcIpBgpPeerGroupEntry 17 }
|
|
|
|
rcIpBgpPeerGroupPassword OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To enable MD5 authentication on TCP connections
|
|
between this local speaker and this group of BGP peers.
|
|
Case-sensitive password of up to 80 character"
|
|
::= { rcIpBgpPeerGroupEntry 18 }
|
|
|
|
rcIpBgpPeerGroupRemovePrivateAs OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable and disable private AS number from being
|
|
stripped when sending an update"
|
|
DEFVAL { enable }
|
|
::= { rcIpBgpPeerGroupEntry 19 }
|
|
|
|
rcIpBgpPeerGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rcIpBgpPeerGroupEntry 20 }
|
|
|
|
rcIpBgpPeerGroupMD5Authentication OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable and Disable MD5 authentication"
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 21 }
|
|
|
|
rcIpBgpPeerGroupSendCommunity OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enables or disables sending the update
|
|
message community attribute to the specified
|
|
peer."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 22 }
|
|
|
|
rcIpBgpPeerGroupUpdateSourceInterface OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The IP address to used for circuitless IP for this peer group."
|
|
::= { rcIpBgpPeerGroupEntry 23 }
|
|
|
|
rcIpBgpPeerGroupVpnv4Address OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The vpnv4 routes specified."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 24 }
|
|
|
|
rcIpBgpPeerGroupIpvpnLiteCap OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer group."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 25 }
|
|
|
|
rcIpBgpPeerGroupSooAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The site-of-origin ipaddress."
|
|
::= { rcIpBgpPeerGroupEntry 26 }
|
|
|
|
rcIpBgpPeerGroupSooAsNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The asnum for site-of-origin for bgp peer group."
|
|
::= { rcIpBgpPeerGroupEntry 27}
|
|
|
|
rcIpBgpPeerGroupSooAssignedNum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Assigned number required along with asnum or
|
|
address to configure the site-of-origin for bgp
|
|
peer group."
|
|
::= { rcIpBgpPeerGroupEntry 28}
|
|
|
|
rcIpBgpPeerGroupSooType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
asnum(1),
|
|
ipaddr(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The soo type can be asnum or ipaddress."
|
|
::= { rcIpBgpPeerGroupEntry 29}
|
|
|
|
rcIpBgpPeerGroupRouteRefresh OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route refresh for bgp peer group."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 30 }
|
|
|
|
rcIpBgpPeerGroupAsOverride OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The AS Override value can be enabled or disabled for bgp peer group."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 31}
|
|
|
|
rcIpBgpPeerGroupAllowAsIn OBJECT-TYPE
|
|
SYNTAX Integer32(0..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The number of as-in allowed for bgp peer group."
|
|
::= { rcIpBgpPeerGroupEntry 32}
|
|
|
|
rcIpBgpPeerGroupDefaultOriginateIpv6 OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enabling this attribute allows a BGP speaker
|
|
(the local router) to send the default route to
|
|
the group of neighbors for use as a default
|
|
route."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpPeerGroupEntry 33 }
|
|
|
|
rcIpBgpPeerGroupAfUpdateSourceInterfaceType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Inet address type used for circuitless IP
|
|
for this peer group."
|
|
::= { rcIpBgpPeerGroupEntry 34 }
|
|
|
|
rcIpBgpPeerGroupAfUpdateSourceInterface OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Inet address to used for circuitless IP for
|
|
this peer group."
|
|
::= { rcIpBgpPeerGroupEntry 35 }
|
|
|
|
rcIpBgpPeerGroupIpv6Cap OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The ipv6 capability can be enabled or disabled
|
|
on the bgp neighbor peer group."
|
|
DEFVAL { disable }
|
|
::= { rcIpBgpPeerGroupEntry 36 }
|
|
|
|
rcIpBgpPeerGroupIpv6RoutePolicyIn OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 Route Policy Name that will be applied to all
|
|
networks learned from this group of peers"
|
|
::= { rcIpBgpPeerGroupEntry 37 }
|
|
|
|
rcIpBgpPeerGroupIpv6RoutePolicyOut OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 Route policy name that will be applied to all
|
|
outgoing updates to this group of peers"
|
|
::= { rcIpBgpPeerGroupEntry 38 }
|
|
|
|
rcIpBgpPeerGroupBfdEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Bfd can be enabled or disabled for bgp peer group."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpPeerGroupEntry 39}
|
|
|
|
rcIpBgpPeerGroupDebugMask OBJECT-TYPE
|
|
SYNTAX INTEGER (0..511)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " value is one of multiple (logically by 'OR' of
|
|
following value:
|
|
none (0),
|
|
error(1),
|
|
packet(2),
|
|
event(4),
|
|
trace(8),
|
|
warning(16),
|
|
state(32),
|
|
init(64),
|
|
filter(128),
|
|
update(256),
|
|
all(511)
|
|
all(511): Enables all debugging messages.
|
|
none(0): Disables all debugging messages.
|
|
error(1): Enables disolay of debug error messages.
|
|
packet(2): Enables display of debug packet messages.
|
|
event(4): Enables display of debug event messages.
|
|
trace(8): Enables display debug trace messages.
|
|
warning(16): Enables display debug warning messages.
|
|
state(32): Enables display of debug state transtion
|
|
messages.
|
|
init(64): Enables display of debug initialization
|
|
messages.
|
|
filter(128): Enables display of debug messages related
|
|
to filtering.
|
|
update(256): Enables display of debug messages related
|
|
to sending and receiving updates."
|
|
DEFVAL { 0 }
|
|
::= { rcIpBgpPeerGroupEntry 40 }
|
|
|
|
rcIpBgpPeerGroupIpv6MaxPrefix OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Sets a limit on the number of IPv6 routes that will be
|
|
accepted from this group of neighbors. A value of zero
|
|
indicates no limit"
|
|
DEFVAL {8000}
|
|
::= { rcIpBgpPeerGroupEntry 41 }
|
|
|
|
rcIpBgpRcvdDampenedPathAttrTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpBgp 12 }
|
|
|
|
rcIpBgpRcvdDampenedPathAttrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpDampenedPathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains info about paths to destination
|
|
networks received from all BGP-4 peers"
|
|
::= { rcIpBgp 13 }
|
|
|
|
rcIpBgpDampenedPathAttrEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpDampenedPathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a path to a networks"
|
|
INDEX { rcIpBgpPathAttrIpAddrPrefix,
|
|
rcIpBgpPathAttrIpAddrPrefixLen,
|
|
rcIpBgpPathAttrPeer
|
|
}
|
|
::= { rcIpBgpRcvdDampenedPathAttrTable 1 }
|
|
|
|
RcIpBgpDampenedPathAttrEntry ::=
|
|
SEQUENCE {
|
|
|
|
rcIpBgpPathAttrPeer IpAddress,
|
|
rcIpBgpPathAttrIpAddrPrefixLen INTEGER,
|
|
rcIpBgpPathAttrIpAddrPrefix IpAddress,
|
|
rcIpBgpPathAttrFlapPenalty Integer32,
|
|
rcIpBgpPathAttrFlapCount Integer32,
|
|
rcIpBgpPathAttrRouteDampened INTEGER,
|
|
rcIpBgpPathAttrReuseTime Integer32,
|
|
rcIpBgpPathAttrReuseTimeRemain Integer32
|
|
}
|
|
|
|
rcIpBgpPathAttrPeer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the peer where the path info was
|
|
learned"
|
|
::= { rcIpBgpDampenedPathAttrEntry 1 }
|
|
|
|
rcIpBgpPathAttrIpAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Length in bits of the IP address prefix in the network
|
|
Layer Reachablity Information field."
|
|
::= { rcIpBgpDampenedPathAttrEntry 2 }
|
|
|
|
rcIpBgpPathAttrIpAddrPrefix OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An Ip address prefix in the NLRI Information field.
|
|
This object is an IP address containing the prefix
|
|
with length specified by rcIpBgpPathAttrIpAddrPrefixLen
|
|
are zeroed."
|
|
::= { rcIpBgpDampenedPathAttrEntry 3 }
|
|
|
|
rcIpBgpPathAttrFlapPenalty OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Penalty value based on number of route flaps"
|
|
::= { rcIpBgpDampenedPathAttrEntry 4 }
|
|
|
|
rcIpBgpPathAttrFlapCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times a route flapped since the last time the
|
|
penalty was reset to zero"
|
|
::= { rcIpBgpDampenedPathAttrEntry 5 }
|
|
|
|
rcIpBgpPathAttrRouteDampened OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
announced(1),
|
|
suppressed(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Shows whether this route is currently suppressed from
|
|
being announced"
|
|
::= { rcIpBgpDampenedPathAttrEntry 6 }
|
|
|
|
rcIpBgpPathAttrReuseTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Re use time is the system configured time for
|
|
route reuse"
|
|
::= { rcIpBgpDampenedPathAttrEntry 7 }
|
|
|
|
rcIpBgpPathAttrReuseTimeRemain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Re use time Remain is the number of seconds before the route will be reused"
|
|
::= { rcIpBgpDampenedPathAttrEntry 8 }
|
|
|
|
rcIpBgp4PathAttrTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size"
|
|
::= { rcIpBgp 14 }
|
|
|
|
rcIpBgp4PathAttrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgp4PathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains info about paths to destination
|
|
networks received from all BGP-4 peers"
|
|
::= { rcIpBgp 15 }
|
|
|
|
rcIpBgp4PathAttrEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgp4PathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIpBgp4PathAttrIpAddrPrefix,
|
|
rcIpBgp4PathAttrIpAddrPrefixLen,
|
|
rcIpBgp4PathAttrPeer
|
|
}
|
|
::= { rcIpBgp4PathAttrTable 1 }
|
|
|
|
RcIpBgp4PathAttrEntry ::=
|
|
SEQUENCE {
|
|
rcIpBgp4PathAttrPeer IpAddress,
|
|
rcIpBgp4PathAttrIpAddrPrefixLen INTEGER,
|
|
rcIpBgp4PathAttrIpAddrPrefix IpAddress,
|
|
rcIpBgp4PathAttrCommunities OCTET STRING,
|
|
rcIpBgp4PathAttrOriginateId IpAddress,
|
|
rcIpBgp4PathAttrClusterId OCTET STRING
|
|
}
|
|
|
|
rcIpBgp4PathAttrPeer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the peer where the path info was
|
|
learned"
|
|
::= { rcIpBgp4PathAttrEntry 1 }
|
|
|
|
rcIpBgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Length in bits of the IP address prefix in the network
|
|
Layer Reachablity Information field."
|
|
::= { rcIpBgp4PathAttrEntry 2 }
|
|
|
|
rcIpBgp4PathAttrIpAddrPrefix OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An Ip address prefix in the NLRI Information field.
|
|
This object is an IP address containing the prefix
|
|
with length specified by rcIpBgpPathAttrIpAddrPrefixLen
|
|
are zeroed."
|
|
::= { rcIpBgp4PathAttrEntry 3 }
|
|
|
|
rcIpBgp4PathAttrCommunities OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The string represents community path attributes as <length,value>
|
|
The length is a 1-octet field containing the numbner of community
|
|
numbers in the value field.The value field contains one or more
|
|
Community numbers,each community is represented in the octet
|
|
string as 4 octets.The community numbers in the string beyond
|
|
maximum size 255,if any, will not be recorded by this object."
|
|
::= { rcIpBgp4PathAttrEntry 4 }
|
|
|
|
rcIpBgp4PathAttrOriginateId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the route who originates the routes"
|
|
::= { rcIpBgp4PathAttrEntry 5 }
|
|
|
|
rcIpBgp4PathAttrClusterId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The string represents Cluster Id path attributes as <length,value>
|
|
The length is a 1-octet field containing the number of Cluster Id
|
|
numbers in the value field.The value field contains one or more
|
|
Cluster Id numbers,each Cluster Id is represented in the octet
|
|
string as 4 octets,each four octets is the IpAddress of the
|
|
router acting as a route reflector.The Cluster Id numbers in the
|
|
string beyond maximum size 255,if any, will not be recorded by
|
|
this object."
|
|
::= { rcIpBgp4PathAttrEntry 6 }
|
|
|
|
rcIpBgpExt OBJECT IDENTIFIER ::= { rcIpBgp 16 }
|
|
|
|
rcIpBgpExtAggregateAfTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of address family independent bgp aggregate table"
|
|
::= { rcIpBgpExt 1 }
|
|
|
|
rcIpBgpExtAggregateAfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpExtAggregateAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Replaces rcIpBgpAggregateTable.
|
|
To specify the list of ipv4 and ipv6 aggregate
|
|
prefixes to be created by the BGP routing process
|
|
and the options to be used while aggregating."
|
|
::= { rcIpBgpExt 2 }
|
|
|
|
rcIpBgpExtAggregateAfEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpExtAggregateAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of v4/v6 aggregate prefix to be created by
|
|
BGP routing process and the options to be used
|
|
while aggregating."
|
|
INDEX { rcIpBgpExtAggregateAfAddressType,
|
|
rcIpBgpExtAggregateAfAddress,
|
|
rcIpBgpExtAggregateAfPrefixLen }
|
|
::= { rcIpBgpExtAggregateAfTable 1 }
|
|
|
|
RcIpBgpExtAggregateAfEntry ::= SEQUENCE {
|
|
rcIpBgpExtAggregateAfAddressType InetAddressType,
|
|
rcIpBgpExtAggregateAfAddress InetAddress,
|
|
rcIpBgpExtAggregateAfPrefixLen InetAddressPrefixLength,
|
|
rcIpBgpExtAggregateAfAsSetGenerate TruthValue,
|
|
rcIpBgpExtAggregateAfSummaryOnly TruthValue,
|
|
rcIpBgpExtAggregateAfSuppressPolicy SnmpAdminString,
|
|
rcIpBgpExtAggregateAfAdvertisePolicy SnmpAdminString,
|
|
rcIpBgpExtAggregateAfAttributePolicy SnmpAdminString,
|
|
rcIpBgpExtAggregateAfRowStatus RowStatus
|
|
}
|
|
|
|
rcIpBgpExtAggregateAfAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inet Address Type of aggregate address."
|
|
::= { rcIpBgpExtAggregateAfEntry 1 }
|
|
|
|
rcIpBgpExtAggregateAfAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "V4 or V6 Prefix to create an aggregate address in BGP
|
|
routing table."
|
|
::= { rcIpBgpExtAggregateAfEntry 2 }
|
|
|
|
rcIpBgpExtAggregateAfPrefixLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Prefix length of the aggregate inet address"
|
|
::= { rcIpBgpExtAggregateAfEntry 3 }
|
|
|
|
rcIpBgpExtAggregateAfAsSetGenerate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable Generates autonomous system set path
|
|
information."
|
|
DEFVAL {false}
|
|
::= { rcIpBgpExtAggregateAfEntry 4 }
|
|
|
|
rcIpBgpExtAggregateAfSummaryOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Filters all more specific routes from updates."
|
|
DEFVAL {false}
|
|
::= { rcIpBgpExtAggregateAfEntry 5 }
|
|
|
|
rcIpBgpExtAggregateAfSuppressPolicy OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Name of route policy used to select the
|
|
routes to be suppressed."
|
|
::= { rcIpBgpExtAggregateAfEntry 6 }
|
|
|
|
rcIpBgpExtAggregateAfAdvertisePolicy OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Name of route policy used to select the
|
|
routes to create AS-SET origin communities."
|
|
::= { rcIpBgpExtAggregateAfEntry 7 }
|
|
|
|
rcIpBgpExtAggregateAfAttributePolicy OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Name of route policy used to set the
|
|
attribute of the aggregate route."
|
|
::= { rcIpBgpExtAggregateAfEntry 8 }
|
|
|
|
rcIpBgpExtAggregateAfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete."
|
|
::= { rcIpBgpExtAggregateAfEntry 9 }
|
|
|
|
rcIpBgpExtNetworkAfTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Address family independent bgp Network Prefix table size"
|
|
::= { rcIpBgpExt 3 }
|
|
|
|
rcIpBgpExtNetworkAfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpExtNetworkAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table replaces rcIpBgpNetworkTable.
|
|
This table supports V4 and V6 BGP networks.
|
|
The networks in this table are either
|
|
static/directly connected or learned routes.
|
|
Bgp advertises these network provided they are
|
|
reachable and are in the IP routing table"
|
|
::= { rcIpBgpExt 4 }
|
|
|
|
rcIpBgpExtNetworkAfEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpExtNetworkAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in bgp NetworkTable."
|
|
INDEX { rcIpBgpExtNetworkAfAddrType,
|
|
rcIpBgpExtNetworkAfAddr,
|
|
rcIpBgpExtNetworkAfPrefixLen }
|
|
::= { rcIpBgpExtNetworkAfTable 1 }
|
|
|
|
RcIpBgpExtNetworkAfEntry ::=
|
|
SEQUENCE {
|
|
rcIpBgpExtNetworkAfAddrType InetAddressType,
|
|
rcIpBgpExtNetworkAfAddr InetAddress,
|
|
rcIpBgpExtNetworkAfPrefixLen InetAddressPrefixLength,
|
|
rcIpBgpExtNetworkAfMetric Integer32,
|
|
rcIpBgpExtNetworkAfRowStatus RowStatus
|
|
}
|
|
|
|
rcIpBgpExtNetworkAfAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inet address type of the Network prefix that BGP will
|
|
advertise."
|
|
::= { rcIpBgpExtNetworkAfEntry 1 }
|
|
|
|
rcIpBgpExtNetworkAfAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "v4/v6 Network prefix that BGP will advertise."
|
|
::= { rcIpBgpExtNetworkAfEntry 2 }
|
|
|
|
rcIpBgpExtNetworkAfPrefixLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Prefix length of the v4/v6 bgp network address"
|
|
::= { rcIpBgpExtNetworkAfEntry 3 }
|
|
|
|
rcIpBgpExtNetworkAfMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Value of the metric to be used while sending
|
|
an update for the routes from the network table.
|
|
Indicates to set the MED value for the routes
|
|
advertised to ebgp Peers."
|
|
DEFVAL { 0 }
|
|
::= { rcIpBgpExtNetworkAfEntry 4 }
|
|
|
|
rcIpBgpExtNetworkAfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete."
|
|
::= { rcIpBgpExtNetworkAfEntry 5 }
|
|
|
|
rcIpBgpExtPeerAfTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of Address family independent BGP
|
|
Peer Table"
|
|
::= { rcIpBgpExt 5 }
|
|
|
|
rcIpBgpExtPeerAfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpExtPeerAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Extension to the BGP peer table. This table contains,
|
|
one entry per BGP peer, information about the connections
|
|
with BGP Peers, which is not supported by the standard
|
|
MIB draft. This table replaces rcIpBgpPeerTable."
|
|
::= { rcIpBgpExt 6 }
|
|
|
|
rcIpBgpExtPeerAfEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpExtPeerAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry containing miscelleneous information (info not
|
|
present in the standard BGP peer table) about the
|
|
connection with a remote BGP peer ."
|
|
AUGMENTS {
|
|
rcIpBgpTmpPeerAfEntry
|
|
}
|
|
::= { rcIpBgpExtPeerAfTable 1 }
|
|
|
|
RcIpBgpExtPeerAfEntry ::= SEQUENCE {
|
|
rcIpBgpExtPeerAfGroupName SnmpAdminString,
|
|
rcIpBgpExtPeerAfDefaultOriginate TruthValue,
|
|
rcIpBgpExtPeerAfDefaultOriginateIpv6 TruthValue,
|
|
rcIpBgpExtPeerAfEbgpMultiHop TruthValue,
|
|
rcIpBgpExtPeerAfAdvertisementInterval Integer32,
|
|
rcIpBgpExtPeerAfPassword SnmpAdminString,
|
|
rcIpBgpExtPeerAfWeight Integer32,
|
|
rcIpBgpExtPeerAfMaxPrefix Integer32,
|
|
rcIpBgpExtPeerAfNextHopSelf TruthValue,
|
|
rcIpBgpExtPeerAfRoutePolicyIn SnmpAdminString,
|
|
rcIpBgpExtPeerAfRoutePolicyOut SnmpAdminString,
|
|
rcIpBgpExtPeerAfRouteReflectorClient TruthValue,
|
|
rcIpBgpExtPeerAfSoftReconfigurationIn TruthValue,
|
|
rcIpBgpExtPeerAfSoftReconfiguration INTEGER,
|
|
rcIpBgpExtPeerAfRemovePrivateAs TruthValue,
|
|
rcIpBgpExtPeerAfMD5Authentication TruthValue,
|
|
rcIpBgpExtPeerAfDebugMask Integer32,
|
|
rcIpBgpExtPeerAfSendCommunity TruthValue,
|
|
rcIpBgpExtPeerAfUpdateSourceInterface InetAddress,
|
|
rcIpBgpExtPeerAfVpnv4Address TruthValue,
|
|
rcIpBgpExtPeerAfIpv6Cap TruthValue,
|
|
rcIpBgpExtPeerAfIpvpnLiteCap TruthValue,
|
|
rcIpBgpExtPeerAfSooAddress IpAddress,
|
|
rcIpBgpExtPeerAfSooAsNumber Integer32,
|
|
rcIpBgpExtPeerAfSooAssignedNum Unsigned32,
|
|
rcIpBgpExtPeerAfSooType INTEGER,
|
|
rcIpBgpExtPeerAfRouteRefresh TruthValue,
|
|
rcIpBgpExtPeerAfAsOverride TruthValue,
|
|
rcIpBgpExtPeerAfAllowAsIn Integer32,
|
|
rcIpBgpExtPeerAfIpv6RoutePolicyIn SnmpAdminString,
|
|
rcIpBgpExtPeerAfIpv6RoutePolicyOut SnmpAdminString,
|
|
rcIpBgpExtPeerAfEnable TruthValue,
|
|
rcIpBgpExtPeerAfRemoteAs InetAutonomousSystemNumber,
|
|
rcIpBgpExtPeerAfConnectRetryInterval Unsigned32,
|
|
rcIpBgpExtPeerAfHoldTimeConfigured Unsigned32,
|
|
rcIpBgpExtPeerAfKeepAliveConfigured Unsigned32,
|
|
rcIpBgpExtPeerAfRowStatus RowStatus,
|
|
rcIpBgpExtPeerAfNewRemoteAs OCTET STRING,
|
|
rcIpBgpExtPeerAfBfdEnable TruthValue,
|
|
rcIpBgpExtPeerAfIpv6MaxPrefix Integer32
|
|
}
|
|
|
|
rcIpBgpExtPeerAfGroupName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Peer group name to which this peer belongs (optional)"
|
|
::= { rcIpBgpExtPeerAfEntry 1 }
|
|
|
|
rcIpBgpExtPeerAfDefaultOriginate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To allow a BGP speaker (the local router) to
|
|
send the default route 0.0.0.0 to a neighbor for
|
|
use as a default route"
|
|
DEFVAL {false}
|
|
::= { rcIpBgpExtPeerAfEntry 2 }
|
|
|
|
rcIpBgpExtPeerAfDefaultOriginateIpv6 OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To allow a BGP speaker (the local router) to
|
|
Send the default ipv6 route to a neighbor for
|
|
use as a default route"
|
|
DEFVAL {false}
|
|
::= { rcIpBgpExtPeerAfEntry 3 }
|
|
|
|
rcIpBgpExtPeerAfEbgpMultiHop OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To accept and attempt BGP connections to
|
|
external peers residing on networks that are not
|
|
directly connected"
|
|
DEFVAL {false}
|
|
::= { rcIpBgpExtPeerAfEntry 4 }
|
|
|
|
rcIpBgpExtPeerAfAdvertisementInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (5..120)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To set the minimum interval between the sending
|
|
Of BGP routing updates Time in seconds. Integer
|
|
from 5 to 120."
|
|
DEFVAL { 30 }
|
|
::= { rcIpBgpExtPeerAfEntry 5 }
|
|
|
|
rcIpBgpExtPeerAfPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..80))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To enable MD5 authentication on a TCP connection
|
|
between two BGP Peers Case-sensitive password of
|
|
up to 80 character"
|
|
::= { rcIpBgpExtPeerAfEntry 6 }
|
|
|
|
rcIpBgpExtPeerAfWeight OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To assign an absolute weight to a BGP network.
|
|
It can be an integer from 0 to 65535."
|
|
DEFVAL { 100 }
|
|
::= { rcIpBgpExtPeerAfEntry 7 }
|
|
|
|
rcIpBgpExtPeerAfMaxPrefix OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Sets a limit on the number of routes that will
|
|
be accepted from a neighbor. A value of zero
|
|
indicates no limit"
|
|
DEFVAL {12000}
|
|
::= { rcIpBgpExtPeerAfEntry 8 }
|
|
|
|
rcIpBgpExtPeerAfNextHopSelf OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Set NextHop Attribute to local router address
|
|
Before sending updates to remote peer"
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 9 }
|
|
|
|
rcIpBgpExtPeerAfRoutePolicyIn OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route Policy Name that will be applied to all
|
|
Networks learned from this peer"
|
|
::= { rcIpBgpExtPeerAfEntry 10 }
|
|
|
|
rcIpBgpExtPeerAfRoutePolicyOut OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route policy name that will be applied to all
|
|
outgoing updates"
|
|
::= { rcIpBgpExtPeerAfEntry 11 }
|
|
|
|
rcIpBgpExtPeerAfRouteReflectorClient OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether this peer is a route reflector
|
|
client."
|
|
DEFVAL {false}
|
|
::= { rcIpBgpExtPeerAfEntry 12 }
|
|
|
|
rcIpBgpExtPeerAfSoftReconfigurationIn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "If Peer soft reconfiguration is enabled in the
|
|
in-bound direction, policy can be changed and
|
|
routes can re-learned without having to reset
|
|
the bgp connection. Enabling soft reconfig-in
|
|
causes all bgp routes to be stored in local
|
|
memory (even non-best routes)"
|
|
DEFVAL {true}
|
|
::= { rcIpBgpExtPeerAfEntry 13 }
|
|
|
|
rcIpBgpExtPeerAfSoftReconfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
in (1),
|
|
out(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "If rcIpBgpExtPeerAfSoftReconfigurationIn is enabled
|
|
in the in-bound direction, policy can be changed
|
|
and routes can re-learned without having to
|
|
reset the bgp connection by setting
|
|
rcIpBgpExtPeerAfSoftReconfiguration to in(1).
|
|
Setting the value to out (2) forces the neighbor
|
|
to send out all the updates to the remote
|
|
neighbor without resetting the connection."
|
|
DEFVAL {none}
|
|
::= { rcIpBgpExtPeerAfEntry 14 }
|
|
|
|
rcIpBgpExtPeerAfRemovePrivateAs OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable and disable private AS number from being
|
|
stripped when sending an update"
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 15 }
|
|
|
|
rcIpBgpExtPeerAfMD5Authentication OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable and Disable MD5 authentication"
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 16 }
|
|
|
|
rcIpBgpExtPeerAfDebugMask OBJECT-TYPE
|
|
SYNTAX Integer32 (0..511)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " value is one of multiple (logically by 'OR' of
|
|
following value:
|
|
none (0),
|
|
error(1),
|
|
packet(2),
|
|
event(4),
|
|
trace(8),
|
|
warning(16),
|
|
state(32),
|
|
init(64),
|
|
filter(128),
|
|
update(256),
|
|
all(511)
|
|
all(511): Enables all debugging messages.
|
|
none(0): Disables all debugging messages.
|
|
error(1): Enables display of debug error
|
|
messages.
|
|
packet(2): Enables display of debug packet
|
|
messages.
|
|
event(4): Enables display of debug event
|
|
messages.
|
|
trace(8): Enables display debug trace messages.
|
|
warning(16): Enables display debug warning
|
|
messages.
|
|
state(32): Enables display of debug state
|
|
transition messages.
|
|
init(64): Enables display of debug
|
|
initialization messages.
|
|
filter(128): Enables display of debug messages
|
|
related to filtering.
|
|
update(256): Enables display of debug messages
|
|
related to sending and receiving
|
|
updates."
|
|
DEFVAL { 0 }
|
|
::= { rcIpBgpExtPeerAfEntry 17 }
|
|
|
|
-- Following between =begin =end is processed by mib_tools/extras.awk
|
|
-- =begin enum
|
|
-- rcIpBgpExtPeerAfDebugMask none 0
|
|
-- rcIpBgpExtPeerAfDebugMask error 1
|
|
-- rcIpBgpExtPeerAfDebugMask packet 2
|
|
-- rcIpBgpExtPeerAfDebugMask event 4
|
|
-- rcIpBgpExtPeerAfDebugMask trace 8
|
|
-- rcIpBgpExtPeerAfDebugMask warning 16
|
|
-- rcIpBgpExtPeerAfDebugMask state 32
|
|
-- rcIpBgpExtPeerAfDebugMask init 64
|
|
-- rcIpBgpExtPeerAfDebugMask filter 128
|
|
-- rcIpBgpExtPeerAfDebugMask update 256
|
|
-- rcIpBgpExtPeerAfDebugMask all 511
|
|
-- =end enum
|
|
|
|
rcIpBgpExtPeerAfSendCommunity OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enables or disables sending the update message
|
|
community attribute to the specified peer."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 18 }
|
|
|
|
rcIpBgpExtPeerAfUpdateSourceInterface OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Inet address to be used for Circuitless IP."
|
|
::= { rcIpBgpExtPeerAfEntry 19 }
|
|
|
|
rcIpBgpExtPeerAfVpnv4Address OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " The vpnv4 routes specified."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 20 }
|
|
|
|
rcIpBgpExtPeerAfIpv6Cap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " The ipv6 capability can be enabled or
|
|
disabled on the bgp neighbor peer."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 21 }
|
|
|
|
rcIpBgpExtPeerAfIpvpnLiteCap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The IPVPN-lite capability can be enabled or
|
|
disabled on the bgp neighbor peer."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 22 }
|
|
|
|
rcIpBgpExtPeerAfSooAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " The site-of-origin ip address."
|
|
::= { rcIpBgpExtPeerAfEntry 23 }
|
|
|
|
rcIpBgpExtPeerAfSooAsNumber OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The asnum for the site-of-origin for bgp peer."
|
|
::= { rcIpBgpExtPeerAfEntry 24}
|
|
|
|
rcIpBgpExtPeerAfSooAssignedNum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Assigned number required along with asnum or
|
|
address to configure the site-of-origin for bgp
|
|
peer."
|
|
::= { rcIpBgpExtPeerAfEntry 25}
|
|
|
|
rcIpBgpExtPeerAfSooType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
asnum(1),
|
|
ipaddr(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " The soo type can be asnum or ipaddress."
|
|
DEFVAL { none }
|
|
::= { rcIpBgpExtPeerAfEntry 26}
|
|
|
|
rcIpBgpExtPeerAfRouteRefresh OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route refresh for bgp peer."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 27 }
|
|
|
|
rcIpBgpExtPeerAfAsOverride OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The AS Override value can be enabled or disabled
|
|
for bgp peer."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 28}
|
|
|
|
rcIpBgpExtPeerAfAllowAsIn OBJECT-TYPE
|
|
SYNTAX Integer32(0..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The number of as-in allowed for bgp peer."
|
|
::= { rcIpBgpExtPeerAfEntry 29}
|
|
|
|
rcIpBgpExtPeerAfIpv6RoutePolicyIn OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 Route Policy Name that will be applied to all
|
|
Networks learned from this peer"
|
|
::= { rcIpBgpExtPeerAfEntry 30 }
|
|
|
|
rcIpBgpExtPeerAfIpv6RoutePolicyOut OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 Route policy name that will be applied to all
|
|
outgoing updates"
|
|
::= { rcIpBgpExtPeerAfEntry 31 }
|
|
|
|
rcIpBgpExtPeerAfEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable bgp+ peer"
|
|
::= { rcIpBgpExtPeerAfEntry 32 }
|
|
|
|
rcIpBgpExtPeerAfRemoteAs OBJECT-TYPE
|
|
SYNTAX InetAutonomousSystemNumber
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to manually configure the remote as of the bgp+
|
|
peer."
|
|
::= { rcIpBgpExtPeerAfEntry 33 }
|
|
|
|
rcIpBgpExtPeerAfConnectRetryInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the ConnectRetry timer for the
|
|
BGP+ peer."
|
|
::= { rcIpBgpExtPeerAfEntry 34 }
|
|
|
|
rcIpBgpExtPeerAfHoldTimeConfigured OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0 | 3..65535 )
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the Hold Timer for the BGP+ peer."
|
|
::= { rcIpBgpExtPeerAfEntry 35 }
|
|
|
|
rcIpBgpExtPeerAfKeepAliveConfigured OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0 | 1..21845 )
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the KeepAlive Timer for the BGP+ peer."
|
|
::= { rcIpBgpExtPeerAfEntry 36 }
|
|
|
|
rcIpBgpExtPeerAfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the Table."
|
|
::= { rcIpBgpExtPeerAfEntry 37 }
|
|
|
|
rcIpBgpExtPeerAfNewRemoteAs OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..4))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Remote Autonomous system number of this peer"
|
|
::= { rcIpBgpExtPeerAfEntry 38 }
|
|
|
|
rcIpBgpExtPeerAfIpv6MaxPrefix OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Sets a limit on the number of ipv6 routes that will
|
|
be accepted from a neighbor. A value of zero
|
|
indicates no limit"
|
|
DEFVAL {8000}
|
|
::= { rcIpBgpExtPeerAfEntry 40 }
|
|
|
|
rcIpBgpExtPeerAfBfdEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "BFD Admin state flag."
|
|
DEFVAL { false }
|
|
::= { rcIpBgpExtPeerAfEntry 39 }
|
|
|
|
rcIpBgpExtAfPathAttrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpExtAfPathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Extension to rcIpBgpTmpAfPathAttrTable. This table contains
|
|
info about additional BGP path attributes not covered in
|
|
rcIpBgpTmpAfPathAttrTable."
|
|
::= { rcIpBgpExt 7 }
|
|
|
|
rcIpBgpExtAfPathAttrEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpExtAfPathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains data about additional path attributes
|
|
associated with a given prefix in the rcIpBgpTmpNlriTable."
|
|
AUGMENTS {
|
|
rcIpBgpTmpAfPathAttrEntry
|
|
}
|
|
::= { rcIpBgpExtAfPathAttrTable 1 }
|
|
|
|
RcIpBgpExtAfPathAttrEntry ::= SEQUENCE {
|
|
rcIpBgpExtAfPathAttrUnknown OCTET STRING,
|
|
rcIpBgpExtAfPathAttrCommunities OCTET STRING,
|
|
rcIpBgpExtAfPathAttrOriginateId IpAddress,
|
|
rcIpBgpExtAfPathAttrClusterId OCTET STRING
|
|
}
|
|
|
|
rcIpBgpExtAfPathAttrUnknown OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Replaces bgp4PathAttrUnknown.
|
|
One or more path attributes not understood
|
|
by this BGP4 speaker. Size zero (0)
|
|
indicates the absence of such
|
|
attribute(s). Octets beyond the maximum
|
|
size, if any, are not recorded by this
|
|
object."
|
|
::= { rcIpBgpExtAfPathAttrEntry 1 }
|
|
|
|
rcIpBgpExtAfPathAttrCommunities OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string represents BGP+ community path attributes as
|
|
<length ,value>. The length is a 1-octet field containing the
|
|
numbner of community numbers in the value field.The value field
|
|
contains one or more Community numbers,each community is
|
|
represented in the octet string as 4 octets.The community numbers
|
|
in the string beyond maximum size 255,if any, will not be recorded
|
|
by this object."
|
|
::= { rcIpBgpExtAfPathAttrEntry 2 }
|
|
|
|
rcIpBgpExtAfPathAttrOriginateId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "In a BGP+ context, the IP address of the router which
|
|
originates the routes."
|
|
::= { rcIpBgpExtAfPathAttrEntry 3 }
|
|
|
|
rcIpBgpExtAfPathAttrClusterId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The string represents BGP+ Cluster Id path attributes as
|
|
<length,value>. The length is a 1-octet field containing
|
|
the number of Cluster Id numbers in the value field. The
|
|
value field contains one or more Cluster Id numbers, each Cluster Id is represented in the octet string as 4
|
|
octets, each four octets is the IpAddress of the router
|
|
acting as a route reflector.The Cluster Id numbers in the
|
|
string beyond maximum size 255,if any, will not be
|
|
recorded by this object."
|
|
::= { rcIpBgpExtAfPathAttrEntry 4 }
|
|
|
|
|
|
rcIpBgpTmp OBJECT IDENTIFIER ::= { rcIpBgp 17 }
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
|
|
|
|
RcIpBgpTmpIdentifierTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1d."
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The representation of a BGP Identifier. BGP Identifiers
|
|
are presented in the received network byte order.
|
|
The BGP Identifier is displayed as if it is an IP address,
|
|
even if it would be an illegal one."
|
|
REFERENCE
|
|
"RFC 4273, Section 4.2"
|
|
SYNTAX OCTET STRING(SIZE (4))
|
|
|
|
|
|
RcIpBgpTmpAddressFamilyIdentifierTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The representation of a BGP AFI"
|
|
REFERENCE
|
|
"RFC 4760, Section 3"
|
|
SYNTAX Unsigned32(0..65535)
|
|
|
|
|
|
RcIpBgpTmpSubsequentAddressFamilyIdentifierTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The representation of a BGP SAFI"
|
|
REFERENCE
|
|
"RFC 4760, Section 3"
|
|
SYNTAX Unsigned32(0..255)
|
|
|
|
--
|
|
-- Top level scalars for this MIB
|
|
--
|
|
|
|
rcIpBgpTmpLocalAsNew OBJECT-TYPE
|
|
SYNTAX InetAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local autonomous system number.
|
|
|
|
This object supports 4 byte ASes and replaces
|
|
bgpLocalAs."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.2, 'My Autonomous System'.
|
|
|
|
RFC 4893, BGP Support for Four-octet AS Number
|
|
Space."
|
|
::= { rcIpBgpTmp 9 }
|
|
|
|
--
|
|
-- Address Family (Af) independent per-peer management information.
|
|
--
|
|
|
|
rcIpBgpTmpPeerAf
|
|
OBJECT IDENTIFIER ::= { rcIpBgpTmp 10 }
|
|
|
|
--
|
|
-- Address Family (Af) independent per-peer session management
|
|
-- information.
|
|
--
|
|
|
|
rcIpBgpTmpPeerAfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpTmpPeerAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BGP peer table. This table contains, one entry per BGP
|
|
peer, information about the connections with BGP peers.
|
|
|
|
This table replaces bgpPeerTable."
|
|
::= { rcIpBgpTmpPeerAf 1 }
|
|
|
|
rcIpBgpTmpPeerAfEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpPeerAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry containing information about the connection with
|
|
a remote BGP peer."
|
|
INDEX {
|
|
rcIpBgpTmpPeerAfInstance,
|
|
rcIpBgpTmpPeerAfLocalAddrType,
|
|
rcIpBgpTmpPeerAfLocalAddr,
|
|
rcIpBgpTmpPeerAfRemoteAddrType,
|
|
rcIpBgpTmpPeerAfRemoteAddr
|
|
}
|
|
::= { rcIpBgpTmpPeerAfTable 1 }
|
|
|
|
RcIpBgpTmpPeerAfEntry ::= SEQUENCE {
|
|
-- INDEX information
|
|
rcIpBgpTmpPeerAfInstance
|
|
Unsigned32,
|
|
rcIpBgpTmpPeerAfLocalAddrType
|
|
InetAddressType,
|
|
rcIpBgpTmpPeerAfLocalAddr
|
|
InetAddress,
|
|
rcIpBgpTmpPeerAfRemoteAddrType
|
|
InetAddressType,
|
|
rcIpBgpTmpPeerAfRemoteAddr
|
|
InetAddress,
|
|
|
|
-- Local
|
|
rcIpBgpTmpPeerAfLocalPort
|
|
InetPortNumber,
|
|
rcIpBgpTmpPeerAfLocalAs
|
|
InetAutonomousSystemNumber,
|
|
|
|
-- Remote
|
|
rcIpBgpTmpPeerAfRemotePort
|
|
InetPortNumber,
|
|
rcIpBgpTmpPeerAfRemoteAs
|
|
InetAutonomousSystemNumber,
|
|
rcIpBgpTmpPeerAfIdentifier
|
|
RcIpBgpTmpIdentifierTC,
|
|
|
|
-- Session status
|
|
rcIpBgpTmpPeerAfAdminStatus
|
|
INTEGER,
|
|
rcIpBgpTmpPeerAfPeerState
|
|
INTEGER,
|
|
rcIpBgpTmpPeerAfConfiguredVersion
|
|
Unsigned32,
|
|
rcIpBgpTmpPeerAfNegotiatedVersion
|
|
Unsigned32
|
|
}
|
|
|
|
rcIpBgpTmpPeerAfInstance OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing instance index.
|
|
|
|
Some BGP implementations permit the creation of
|
|
multiple instances of a BGP routing process. An
|
|
example includes routers running BGP/MPLS IP Virtual
|
|
Private Networks.
|
|
|
|
Implementations that do not support multiple
|
|
routing instances should return 1 for this object."
|
|
::= { rcIpBgpTmpPeerAfEntry 1 }
|
|
|
|
rcIpBgpTmpPeerAfLocalAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address family of the local end of the peering
|
|
session."
|
|
::= { rcIpBgpTmpPeerAfEntry 2 }
|
|
|
|
rcIpBgpTmpPeerAfLocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local IP address of this entry's BGP connection."
|
|
::= { rcIpBgpTmpPeerAfEntry 3 }
|
|
|
|
rcIpBgpTmpPeerAfRemoteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address family of the remote end of the peering
|
|
session."
|
|
::= { rcIpBgpTmpPeerAfEntry 4 }
|
|
|
|
rcIpBgpTmpPeerAfRemoteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote IP address of this entry's BGP peer."
|
|
::= { rcIpBgpTmpPeerAfEntry 5 }
|
|
|
|
rcIpBgpTmpPeerAfLocalPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local port for the TCP connection between the BGP
|
|
peers."
|
|
::= { rcIpBgpTmpPeerAfEntry 6 }
|
|
|
|
rcIpBgpTmpPeerAfLocalAs OBJECT-TYPE
|
|
SYNTAX InetAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Some implementations of BGP can represent themselves
|
|
as multiple ASes. This is the AS that this peering
|
|
session is representing itself as to the remote peer."
|
|
::= { rcIpBgpTmpPeerAfEntry 7 }
|
|
|
|
rcIpBgpTmpPeerAfRemotePort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote port for the TCP connection between the BGP
|
|
peers.
|
|
|
|
Note that the objects rcIpBgpTmpPeerAfLocalAddr,
|
|
rcIpBgpTmpPeerAfLocalPort, rcIpBgpTmpPeerAfRemoteAddr and
|
|
rcIpBgpTmpPeerAfRemotePort provide the appropriate reference to
|
|
the standard MIB TCP connection table, or even the ipv6
|
|
TCP MIB as in RFC 4022."
|
|
REFERENCE
|
|
"RFC 2012 - SNMPv2 Management Information Base for the
|
|
Transmission Control Protocol using SMIv2.
|
|
RFC 4022 - IP Version 6 Management Information Base
|
|
for the Transmission Control Protocol."
|
|
::= { rcIpBgpTmpPeerAfEntry 8 }
|
|
|
|
rcIpBgpTmpPeerAfRemoteAs OBJECT-TYPE
|
|
SYNTAX InetAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote autonomous system number received in the BGP
|
|
OPEN message."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.2."
|
|
::= { rcIpBgpTmpPeerAfEntry 9 }
|
|
|
|
rcIpBgpTmpPeerAfIdentifier OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpIdentifierTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGP Identifier of this entry's remote BGP peer.
|
|
|
|
This entry should be 0.0.0.0 unless the
|
|
rcIpBgpTmpPeerAfPeerState is in the openconfirm or the
|
|
established state."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.2, 'BGP Identifier'."
|
|
::= { rcIpBgpTmpPeerAfEntry 10 }
|
|
|
|
rcIpBgpTmpPeerAfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
halted(1),
|
|
running(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether or not the BGP FSM for this remote peer is
|
|
halted or running. The BGP FSM for a remote peer is
|
|
halted after processing a Stop event. Likewise, it is
|
|
in the running state after a Start event.
|
|
|
|
The rcIpBgpTmpPeerAfState will generally be in the idle state
|
|
when the FSM is halted, although some extensions such
|
|
as Graceful Restart will leave the peer in the Idle
|
|
state but with the FSM running."
|
|
REFERENCE
|
|
"RFC 4271, Section 8.1.2."
|
|
::= { rcIpBgpTmpPeerAfEntry 11 }
|
|
|
|
rcIpBgpTmpPeerAfPeerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
connect(2),
|
|
active(3),
|
|
opensent(4),
|
|
openconfirm(5),
|
|
established(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGP peer connection state."
|
|
REFERENCE
|
|
"RFC 4271, Section 8.2.2."
|
|
::= { rcIpBgpTmpPeerAfEntry 12 }
|
|
|
|
rcIpBgpTmpPeerAfConfiguredVersion OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured version to originally start with this
|
|
remote peer. The BGP speaker may permit negotiation to a
|
|
lower version number of the protocol."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.2.
|
|
RFC 4271, Section 7."
|
|
::= { rcIpBgpTmpPeerAfEntry 13 }
|
|
|
|
rcIpBgpTmpPeerAfNegotiatedVersion OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The negotiated version of BGP running between
|
|
the two peers.
|
|
|
|
This entry MUST be zero (0) unless the
|
|
rcIpBgpTmpPeerAfState is in the openconfirm or the
|
|
established state.
|
|
|
|
Note that legal values for this object are
|
|
between 0 and 255."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.2.
|
|
RFC 4271, Section 7."
|
|
::= { rcIpBgpTmpPeerAfEntry 14 }
|
|
|
|
|
|
--
|
|
-- Address Family (Af) independent per-peer error management
|
|
-- information.
|
|
--
|
|
|
|
rcIpBgpTmpPeerAfErrors
|
|
OBJECT IDENTIFIER ::= { rcIpBgpTmpPeerAf 2 }
|
|
|
|
rcIpBgpTmpPeerAfErrorsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpTmpPeerAfErrorsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"On a per-peer basis, this table reflects the last
|
|
protocol-defined error encountered and reported on
|
|
the peer session. If no entry for a given peer
|
|
exists in this table, then no such errors have been
|
|
observed, reported, and recorded on the session."
|
|
::= { rcIpBgpTmpPeerAfErrors 1 }
|
|
|
|
rcIpBgpTmpPeerAfErrorsEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpPeerAfErrorsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information about errors sent
|
|
and received for a particular BGP peer."
|
|
AUGMENTS {
|
|
rcIpBgpTmpPeerAfEntry
|
|
}
|
|
::= { rcIpBgpTmpPeerAfErrorsTable 1 }
|
|
|
|
RcIpBgpTmpPeerAfErrorsEntry ::= SEQUENCE {
|
|
rcIpBgpTmpPeerAfLastErrorCodeReceived
|
|
OCTET STRING,
|
|
rcIpBgpTmpPeerAfLastErrorSubCodeReceived
|
|
OCTET STRING,
|
|
rcIpBgpTmpPeerAfLastErrorReceivedTime
|
|
TimeStamp,
|
|
rcIpBgpTmpPeerAfLastErrorReceivedText
|
|
SnmpAdminString,
|
|
rcIpBgpTmpPeerAfLastErrorReceivedData
|
|
OCTET STRING,
|
|
rcIpBgpTmpPeerAfLastErrorCodeSent
|
|
OCTET STRING,
|
|
rcIpBgpTmpPeerAfLastErrorSubCodeSent
|
|
OCTET STRING,
|
|
rcIpBgpTmpPeerAfLastErrorSentTime
|
|
TimeStamp,
|
|
rcIpBgpTmpPeerAfLastErrorSentText
|
|
SnmpAdminString,
|
|
rcIpBgpTmpPeerAfLastErrorSentData
|
|
OCTET STRING
|
|
}
|
|
|
|
rcIpBgpTmpPeerAfLastErrorCodeReceived OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last error code received from this peer via NOTIFICATION
|
|
message on this connection. If no error has occurred, this
|
|
field is zero."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.5.
|
|
RFC 4486 optionally supported.
|
|
RFC 3362, Section 5 optionally supported."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 1 }
|
|
|
|
rcIpBgpTmpPeerAfLastErrorSubCodeReceived OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last subcode received from this peer via NOTIFICATION
|
|
message on this connection. If no error has occurred, this
|
|
field is zero."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.5.
|
|
RFC 4486 optionally supported.
|
|
RFC 3362, Section 5 optionally supported."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 2 }
|
|
|
|
rcIpBgpTmpPeerAfLastErrorReceivedTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timestamp that the last NOTIFICATION was received from
|
|
this peer."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.5."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 3 }
|
|
|
|
rcIpBgpTmpPeerAfLastErrorReceivedText OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an implementation specific
|
|
explanation of the error that was reported."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 4 }
|
|
|
|
rcIpBgpTmpPeerAfLastErrorReceivedData OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..4075))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last error code's data seen by this peer.
|
|
|
|
Per RFC 2578, some implementations may have limitations
|
|
dealing with OCTET STRINGS larger than 255. Thus, this
|
|
data may be truncated."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.5,
|
|
RFC 2578, Section 7.1.2,
|
|
RFC 4486 optionaly supported.
|
|
RFC 3362, Section 5 optionally supported."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 5 }
|
|
|
|
rcIpBgpTmpPeerAfLastErrorCodeSent OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last error code sent to this peer via NOTIFICATION
|
|
message on this connection. If no error has occurred, this
|
|
field is zero."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.5.
|
|
RFC 4486 optionally supported.
|
|
RFC 3362, Section 5 optionally supported."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 6 }
|
|
|
|
rcIpBgpTmpPeerAfLastErrorSubCodeSent OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last subcode sent to this peer via NOTIFICATION
|
|
message on this connection. If no error has occurred, this
|
|
field is zero."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.5.
|
|
RFC 4486 optionally supported.
|
|
RFC 3362, Section 5 optionally supported."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 7 }
|
|
|
|
rcIpBgpTmpPeerAfLastErrorSentTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timestamp that the last NOTIFICATION was sent to
|
|
this peer."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.5."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 8 }
|
|
|
|
rcIpBgpTmpPeerAfLastErrorSentText OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an implementation specific
|
|
explanation of the error that is being reported."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 9 }
|
|
|
|
rcIpBgpTmpPeerAfLastErrorSentData OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..4075))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last error code's data sent to this peer.
|
|
|
|
Per RFC 2578, some implementations may have limitations
|
|
dealing with OCTET STRINGS larger than 255. Thus, this
|
|
data may be truncated."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.5,
|
|
RFC 2578, Section 7.1.2
|
|
RFC 4486 optionaly supported.
|
|
RFC 3362, Section 5 optionally supported."
|
|
::= { rcIpBgpTmpPeerAfErrorsEntry 10 }
|
|
|
|
--
|
|
-- Address Family (Af) independent per-peer timer information
|
|
--
|
|
|
|
rcIpBgpTmpPeerAfTimers
|
|
OBJECT IDENTIFIER ::= { rcIpBgpTmpPeerAf 3 }
|
|
|
|
--
|
|
-- Per-peer Event Times
|
|
--
|
|
|
|
rcIpBgpTmpPeerAfEventTimesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpTmpPeerAfEventTimesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table reporting the per-peering session amount
|
|
of time elapsed and update events since the peering
|
|
session advanced into the established state."
|
|
::= { rcIpBgpTmpPeerAfTimers 1 }
|
|
|
|
rcIpBgpTmpPeerAfEventTimesEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpPeerAfEventTimesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row contains a set of statistics about time
|
|
spent and events encountered in the peer session
|
|
established state."
|
|
AUGMENTS {
|
|
rcIpBgpTmpPeerAfEntry
|
|
}
|
|
::= { rcIpBgpTmpPeerAfEventTimesTable 1 }
|
|
|
|
RcIpBgpTmpPeerAfEventTimesEntry ::= SEQUENCE {
|
|
rcIpBgpTmpPeerAfFsmEstablishedTime
|
|
Gauge32,
|
|
rcIpBgpTmpPeerAfInUpdatesElapsedTime
|
|
Gauge32
|
|
}
|
|
|
|
rcIpBgpTmpPeerAfFsmEstablishedTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This timer indicates how long (in seconds) this peer
|
|
has been in the established state or how long since this
|
|
peer was last in the established state. It is set to
|
|
zero when a new peer is configured or when the router is
|
|
booted. If the peer has never reached the established
|
|
state, the value remains zero."
|
|
REFERENCE
|
|
"RFC 4271, Section 8."
|
|
::= { rcIpBgpTmpPeerAfEventTimesEntry 1 }
|
|
|
|
rcIpBgpTmpPeerAfInUpdatesElapsedTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Elapsed time (in seconds) since the last BGP UPDATE
|
|
message was received from the peer. Each time
|
|
bgpPeerInUpdates is incremented, the value of this
|
|
object is set to zero (0)."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.3.
|
|
RFC 4271, Section 8.2.2, Established state."
|
|
::= { rcIpBgpTmpPeerAfEventTimesEntry 2 }
|
|
|
|
--
|
|
-- Per-Peer Configured Timers
|
|
--
|
|
|
|
rcIpBgpTmpPeerAfConfiguredTimersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpTmpPeerAfConfiguredTimersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Per peer management data on BGP session timers."
|
|
::= { rcIpBgpTmpPeerAfTimers 2 }
|
|
|
|
rcIpBgpTmpPeerAfConfiguredTimersEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpPeerAfConfiguredTimersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry corresponds to the current state of
|
|
BGP timers on a given peering session."
|
|
AUGMENTS {
|
|
rcIpBgpTmpPeerAfEntry
|
|
}
|
|
::= { rcIpBgpTmpPeerAfConfiguredTimersTable 1 }
|
|
|
|
RcIpBgpTmpPeerAfConfiguredTimersEntry ::= SEQUENCE {
|
|
rcIpBgpTmpPeerAfConnectRetryInterval
|
|
Unsigned32,
|
|
rcIpBgpTmpPeerAfHoldTimeConfigured
|
|
Unsigned32,
|
|
rcIpBgpTmpPeerAfKeepAliveConfigured
|
|
Unsigned32,
|
|
rcIpBgpTmpPeerAfMinASOrigInterval
|
|
Unsigned32,
|
|
rcIpBgpTmpPeerAfMinRouteAdverInterval
|
|
Unsigned32
|
|
}
|
|
|
|
rcIpBgpTmpPeerAfConnectRetryInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval (in seconds) for the ConnectRetry timer.
|
|
The suggested value for this timer is 120 seconds."
|
|
REFERENCE
|
|
"RFC 4271, Section 8.2.2. This is the value used
|
|
to initialize the 'ConnectRetryTimer'."
|
|
::= { rcIpBgpTmpPeerAfConfiguredTimersEntry 1 }
|
|
|
|
rcIpBgpTmpPeerAfHoldTimeConfigured OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0 | 3..65535 )
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval (in seconds) for the Hold Timer
|
|
established with the peer. The value of this object is
|
|
calculated by this BGP speaker, using the smaller of the
|
|
values in bgpPeerHoldTimeConfigured and the Hold Time
|
|
received in the OPEN message.
|
|
|
|
This value must be at least three seconds if it is not
|
|
zero (0).
|
|
|
|
If the Hold Timer has not been established with the
|
|
peer this object MUST have a value of zero (0).
|
|
|
|
If the bgpPeerHoldTimeConfigured object has a value of
|
|
(0), then this object MUST have a value of (0)."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.2."
|
|
::= { rcIpBgpTmpPeerAfConfiguredTimersEntry 2 }
|
|
|
|
rcIpBgpTmpPeerAfKeepAliveConfigured OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0 | 1..21845 )
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval (in seconds) for the KeepAlive timer
|
|
configured for this BGP speaker with this peer. The
|
|
value of this object will only determine the KEEPALIVE
|
|
messages' frequency relative to the value specified in
|
|
bgpPeerHoldTimeConfigured; the actual time interval for
|
|
the KEEPALIVE messages is indicated by bgpPeerKeepAlive.
|
|
|
|
A reasonable maximum value for this timer would be one
|
|
third of that of bgpPeerHoldTimeConfigured.
|
|
|
|
If the value of this object is zero (0), no periodic
|
|
KEEPALIVE messages are sent to the peer after the BGP
|
|
connection has been established. The suggested value
|
|
for this timer is 30 seconds."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.4.
|
|
RFC 4271, Section 10."
|
|
::= { rcIpBgpTmpPeerAfConfiguredTimersEntry 3 }
|
|
|
|
rcIpBgpTmpPeerAfMinASOrigInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval (in seconds) for the
|
|
MinASOriginationInterval timer.
|
|
|
|
The suggested value for this timer is 15 seconds."
|
|
REFERENCE
|
|
"RFC 4271, Section 9.2.1.2.
|
|
RFC 4271, Section 10."
|
|
::= { rcIpBgpTmpPeerAfConfiguredTimersEntry 4 }
|
|
|
|
rcIpBgpTmpPeerAfMinRouteAdverInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval (in seconds) for the
|
|
MinRouteAdvertisementInterval timer.
|
|
|
|
The suggested value for this timer is 30 seconds for
|
|
EBGP connections and 5 seconds for IBGP connections."
|
|
REFERENCE
|
|
"RFC 4271, Section 9.2.1.1.
|
|
RFC 4271, Section 10."
|
|
::= { rcIpBgpTmpPeerAfConfiguredTimersEntry 5 }
|
|
|
|
--
|
|
-- Per-Peer Negotiated Timers
|
|
--
|
|
|
|
rcIpBgpTmpPeerAfNegotiatedTimersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpTmpPeerAfNegotiatedTimersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured values of per-peer timers are seen
|
|
in the rcIpBgpTmpPeerAfConfiguredTimersTable.
|
|
Values in this table reflect the current
|
|
operational values, after negotiation from values
|
|
derived from initial configuration."
|
|
::= { rcIpBgpTmpPeerAfTimers 3 }
|
|
|
|
rcIpBgpTmpPeerAfNegotiatedTimersEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpPeerAfNegotiatedTimersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry reflects a value of the currently
|
|
operational, negotiated timer as reflected in the
|
|
rcIpBgpTmpPeerAfNegotiatedTimersEntry."
|
|
AUGMENTS {
|
|
rcIpBgpTmpPeerAfEntry
|
|
}
|
|
::= { rcIpBgpTmpPeerAfNegotiatedTimersTable 1 }
|
|
|
|
RcIpBgpTmpPeerAfNegotiatedTimersEntry ::= SEQUENCE {
|
|
rcIpBgpTmpPeerAfHoldTime
|
|
Unsigned32,
|
|
rcIpBgpTmpPeerAfKeepAlive
|
|
Unsigned32
|
|
}
|
|
|
|
rcIpBgpTmpPeerAfHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0 | 3..65535 )
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is calculated by this BGP
|
|
Speaker as being;
|
|
|
|
zero (0) - if this was the value sent by the peer and
|
|
this value is permitted by this BGP Speaker. In this
|
|
case, no keepalive messages are sent and the Hold Timer
|
|
is not set.
|
|
|
|
At least three (3). This value is the smaller of
|
|
the value sent by this peer in the OPEN message and
|
|
rcIpBgpTmpPeerAfHoldTimeConfigured for this peer.
|
|
|
|
This value is only defined when the peering session is
|
|
in the Established state."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.2."
|
|
::= { rcIpBgpTmpPeerAfNegotiatedTimersEntry 1 }
|
|
|
|
rcIpBgpTmpPeerAfKeepAlive OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0 | 1..21845 )
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval in seconds for the KeepAlive timer
|
|
established with the peer. The value of this object
|
|
is calculated by this BGP speaker such that, when
|
|
compared with rcIpBgpTmpPeerAfHoldTime, it has the same
|
|
proportion as what rcIpBgpTmpPeerAfKeepAliveConfigured has
|
|
when compared with rcIpBgpTmpPeerAfHoldTimeConfigured. If
|
|
the value of this object is zero (0), it indicates
|
|
that the KeepAlive timer has not been established
|
|
with the peer, or, the value of
|
|
rcIpBgpTmpPeerAfKeepAliveConfigured is zero (0).
|
|
|
|
This value is only defined when the peering session is
|
|
in the Established state."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.4."
|
|
::= { rcIpBgpTmpPeerAfNegotiatedTimersEntry 2 }
|
|
|
|
--
|
|
-- Per-peer counters
|
|
--
|
|
|
|
rcIpBgpTmpPeerAfCounters
|
|
OBJECT IDENTIFIER ::= { rcIpBgpTmpPeerAf 4 }
|
|
|
|
rcIpBgpTmpPeerAfCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpTmpPeerAfCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counters associated with a BGP Peer."
|
|
::= { rcIpBgpTmpPeerAfCounters 1 }
|
|
|
|
rcIpBgpTmpPeerAfCountersEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpPeerAfCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains counters of message transmissions
|
|
and FSM transitions for a given BGP Peering session."
|
|
AUGMENTS {
|
|
rcIpBgpTmpPeerAfEntry
|
|
}
|
|
::= { rcIpBgpTmpPeerAfCountersTable 1 }
|
|
|
|
RcIpBgpTmpPeerAfCountersEntry ::= SEQUENCE {
|
|
rcIpBgpTmpPeerAfInUpdates
|
|
Counter32,
|
|
rcIpBgpTmpPeerAfOutUpdates
|
|
Counter32,
|
|
rcIpBgpTmpPeerAfInTotalMessages
|
|
Counter32,
|
|
rcIpBgpTmpPeerAfOutTotalMessages
|
|
Counter32,
|
|
rcIpBgpTmpPeerAfFsmEstablishedTransitions
|
|
Counter32
|
|
}
|
|
|
|
rcIpBgpTmpPeerAfInUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of BGP UPDATE messages received on this
|
|
connection."
|
|
::= { rcIpBgpTmpPeerAfCountersEntry 1 }
|
|
|
|
rcIpBgpTmpPeerAfOutUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of BGP UPDATE messages transmitted on this
|
|
connection."
|
|
::= { rcIpBgpTmpPeerAfCountersEntry 2 }
|
|
|
|
rcIpBgpTmpPeerAfInTotalMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of messages received from the remote
|
|
peer on this connection."
|
|
::= { rcIpBgpTmpPeerAfCountersEntry 3 }
|
|
|
|
rcIpBgpTmpPeerAfOutTotalMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of messages transmitted to the remote
|
|
peer on this connection."
|
|
::= { rcIpBgpTmpPeerAfCountersEntry 4 }
|
|
|
|
rcIpBgpTmpPeerAfFsmEstablishedTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the BGP FSM transitioned into
|
|
the established state for this peer."
|
|
::= { rcIpBgpTmpPeerAfCountersEntry 5 }
|
|
|
|
--
|
|
-- BGP NLRI Data
|
|
--
|
|
|
|
rcIpBgpTmpRib
|
|
OBJECT IDENTIFIER ::= { rcIpBgpTmp 11 }
|
|
|
|
--
|
|
-- NLRI Table
|
|
--
|
|
|
|
rcIpBgpTmpNlriTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpTmpNlriEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGP-4 Received Path Attribute Table contains
|
|
information about paths to destination networks
|
|
received from all BGP4 peers. Collectively, this
|
|
represents the Adj-Ribs-In. The route where
|
|
rcIpBgpTmpNlriBest is true represents, for this NLRI,
|
|
the route that is installed in the LocRib from the
|
|
Adj-Ribs-In."
|
|
REFERENCE
|
|
"RFC 4271, Sections 3.2 and 9."
|
|
::= { rcIpBgpTmpRib 1 }
|
|
|
|
rcIpBgpTmpNlriEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpNlriEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a path to a network."
|
|
INDEX {
|
|
rcIpBgpTmpNlriAfi,
|
|
rcIpBgpTmpNlriSafi,
|
|
rcIpBgpTmpNlriPrefix,
|
|
rcIpBgpTmpNlriPrefixLen,
|
|
rcIpBgpTmpNlriIndex,
|
|
rcIpBgpTmpPeerAfInstance,
|
|
rcIpBgpTmpPeerAfLocalAddrType,
|
|
rcIpBgpTmpPeerAfLocalAddr,
|
|
rcIpBgpTmpPeerAfRemoteAddrType,
|
|
rcIpBgpTmpPeerAfRemoteAddr
|
|
}
|
|
::= { rcIpBgpTmpNlriTable 1 }
|
|
|
|
RcIpBgpTmpNlriEntry ::= SEQUENCE {
|
|
rcIpBgpTmpNlriIndex
|
|
Unsigned32,
|
|
rcIpBgpTmpNlriAfi
|
|
RcIpBgpTmpAddressFamilyIdentifierTC,
|
|
rcIpBgpTmpNlriSafi
|
|
RcIpBgpTmpSubsequentAddressFamilyIdentifierTC,
|
|
rcIpBgpTmpNlriPrefixType
|
|
InetAddressType,
|
|
rcIpBgpTmpNlriPrefix
|
|
InetAddress,
|
|
rcIpBgpTmpNlriPrefixLen
|
|
InetAddressPrefixLength,
|
|
rcIpBgpTmpNlriBest
|
|
TruthValue,
|
|
rcIpBgpTmpNlriCalcLocalPref
|
|
Unsigned32,
|
|
rcIpBgpTmpAfPathAttrIndex
|
|
Unsigned32,
|
|
rcIpBgpTmpAfPathAttrUnknownIndex -- not supported
|
|
Unsigned32
|
|
}
|
|
|
|
rcIpBgpTmpNlriIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index allows for multiple instances of a base
|
|
prefix for a certain AFI-SAFI from a given peer.
|
|
This is currently useful for two things:
|
|
1. Allowing for a peer in future implementations to
|
|
send more than a single route instance.
|
|
2. Allow for extensions which extend the NLRI field
|
|
to send the same prefix while utilizing other
|
|
extension specific information. An example of
|
|
this is RFC 3107 - Carrying MPLS labels in BGP."
|
|
REFERENCE
|
|
"RFC 3107 - Carrying Label Information in BGP-4."
|
|
::= { rcIpBgpTmpNlriEntry 1 }
|
|
|
|
rcIpBgpTmpNlriAfi OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpAddressFamilyIdentifierTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address family of the prefix for this NLRI.
|
|
|
|
Note that the AFI is not necessarily equivalent to
|
|
the an InetAddressType."
|
|
REFERENCE
|
|
"RFC 4760 - Multiprotocol Extensions for BGP-4"
|
|
::= { rcIpBgpTmpNlriEntry 2 }
|
|
|
|
rcIpBgpTmpNlriSafi OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpSubsequentAddressFamilyIdentifierTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subsequent address family of the prefix for
|
|
this NLRI"
|
|
REFERENCE
|
|
"RFC 4760 - Multiprotocol Extensions for BGP-4"
|
|
::= { rcIpBgpTmpNlriEntry 3 }
|
|
|
|
rcIpBgpTmpNlriPrefixType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the IP address prefix in the
|
|
Network Layer Reachability Information field.
|
|
The value of this object is derived from the
|
|
appropriate value from the rcIpBgpTmpNlriAfi field.
|
|
Where an appropriate InetAddressType is not
|
|
available, the value of the object must be
|
|
unknown(0)."
|
|
::= { rcIpBgpTmpNlriEntry 4 }
|
|
|
|
rcIpBgpTmpNlriPrefix OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An IP address prefix in the Network Layer
|
|
Reachability Information field. This object
|
|
is an IP address containing the prefix with
|
|
length specified by
|
|
rcIpBgpTmpAfPathAttrAddrPrefixLen.
|
|
Any bits beyond the length specified by
|
|
rcIpBgpTmpAfPathAttrAddrPrefixLen are zeroed."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.3."
|
|
::= { rcIpBgpTmpNlriEntry 5 }
|
|
|
|
rcIpBgpTmpNlriPrefixLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length in bits of the address prefix in
|
|
the Network Layer Reachability Information field."
|
|
::= { rcIpBgpTmpNlriEntry 6 }
|
|
|
|
rcIpBgpTmpNlriBest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether or not this route
|
|
was chosen as the best BGP4 route for this
|
|
destination."
|
|
REFERENCE
|
|
"RFC 4271, Section 9.1.2."
|
|
::= { rcIpBgpTmpNlriEntry 7 }
|
|
|
|
rcIpBgpTmpNlriCalcLocalPref OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The degree of preference calculated by the
|
|
receiving BGP4 speaker for an advertised
|
|
route.
|
|
|
|
In the case where this prefix is ineligible, this
|
|
object will be absent."
|
|
REFERENCE
|
|
"RFC 4271, Section 9.1.1"
|
|
::= { rcIpBgpTmpNlriEntry 8 }
|
|
|
|
rcIpBgpTmpAfPathAttrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is a unique index for entries in the
|
|
rcIpBgpTmpAfPathAttrTable. It is assigned by the agent at the
|
|
point of creation of the rcIpBgpTmpAfPathAttrTable row entry.
|
|
While its value is guaranteed to be unique at any time,
|
|
it is otherwise opaque to the management application
|
|
with respect to its value or the contiguity of
|
|
rcIpBgpTmpAfPathAttrIndex row instance values across rows of the
|
|
rcIpBgpTmpAfPathAttrTable.
|
|
|
|
Note well that this index is used to distinguish unique
|
|
sets of Path Attributes sent as part of BGP NLRI. The
|
|
implementor is thus encouraged to make this index unique
|
|
per set of all received path attributes. This value may
|
|
be used to index tables in extension MIBs that share the
|
|
property of belonging to the same received Path Attribute
|
|
tuple."
|
|
::= { rcIpBgpTmpNlriEntry 9 }
|
|
|
|
rcIpBgpTmpAfPathAttrUnknownIndex OBJECT-TYPE -- not supported
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is a unique index for entries in the
|
|
rcIpBgpTmpAfPathAttrUnknownTable. It is assigned by the agent at
|
|
the point of creation of the rcIpBgpTmpAfPathAttrUnknownTable row
|
|
entry. While its value is guaranteed to be unique at
|
|
any time, it is otherwise opaque to the management
|
|
application with respect to its value or the contiguity
|
|
of rcIpBgpTmpAfPathAttrUnknownIndex row instance values across
|
|
rows of the rcIpBgpTmpAfPathAttrUnknownTable."
|
|
::= { rcIpBgpTmpNlriEntry 10 }
|
|
|
|
--
|
|
-- Path Attribute Counter
|
|
--
|
|
|
|
rcIpBgpTmpAfPathAttrCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of entries in the rcIpBgpTmpAfPathAttrTable."
|
|
::= { rcIpBgpTmpRib 3 }
|
|
|
|
--
|
|
-- Path Attributes Table
|
|
--
|
|
|
|
rcIpBgpTmpAfPathAttrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpBgpTmpAfPathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides per advertised network-prefix attribute data,
|
|
as advertised over a peering session."
|
|
::= { rcIpBgpTmpRib 4 }
|
|
|
|
rcIpBgpTmpAfPathAttrEntry OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpAfPathAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains data about path attributes
|
|
associated with a given prefix in the rcIpBgpTmpNlriTable."
|
|
REFERENCE
|
|
"RFC 4271, Section 5."
|
|
INDEX {
|
|
rcIpBgpTmpAfPathAttrIndex
|
|
}
|
|
::= { rcIpBgpTmpAfPathAttrTable 1 }
|
|
|
|
RcIpBgpTmpAfPathAttrEntry ::= SEQUENCE {
|
|
rcIpBgpTmpAfPathAttrOrigin
|
|
INTEGER,
|
|
rcIpBgpTmpAfPathAttrNextHopAddrType
|
|
InetAddressType,
|
|
rcIpBgpTmpAfPathAttrNextHopAddr
|
|
InetAddress,
|
|
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddrType
|
|
InetAddressType,
|
|
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddr
|
|
InetAddress,
|
|
rcIpBgpTmpAfPathAttrMedPresent
|
|
TruthValue,
|
|
rcIpBgpTmpAfPathAttrMed
|
|
Unsigned32,
|
|
rcIpBgpTmpAfPathAttrLocalPref
|
|
Unsigned32,
|
|
rcIpBgpTmpAfPathAttrAtomicAggregate
|
|
INTEGER,
|
|
rcIpBgpTmpAfPathAttrAggregatorAS
|
|
InetAutonomousSystemNumber,
|
|
rcIpBgpTmpAfPathAttrAggregatorAddr
|
|
RcIpBgpTmpIdentifierTC,
|
|
rcIpBgpTmpAsPathCalcLength
|
|
Unsigned32,
|
|
rcIpBgpTmpAsPathIndex -- not supported
|
|
Unsigned32,
|
|
rcIpBgpTmpAsPathString
|
|
SnmpAdminString
|
|
}
|
|
|
|
rcIpBgpTmpAfPathAttrOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
igp(1),-- networks are interior
|
|
egp(2),-- networks learned via the EGP protocol
|
|
incomplete(3) -- networks that
|
|
-- are learned by some other
|
|
-- means
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ultimate origin of the path information."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.3.
|
|
RFC 4271, Section 5.1.1."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 1 }
|
|
|
|
rcIpBgpTmpAfPathAttrNextHopAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address family of the address for
|
|
the border router that should be used
|
|
to access the destination network."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 2 }
|
|
|
|
rcIpBgpTmpAfPathAttrNextHopAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the border router that
|
|
should be used to access the destination
|
|
network. This address is the nexthop
|
|
address received in the UPDATE packet associated with
|
|
this prefix.
|
|
|
|
Note that for RFC2545 style double nexthops,
|
|
this object will always contain the global scope
|
|
nexthop. bgpPathAttrLinkLocalNextHop will contain
|
|
the linklocal scope nexthop, if it is present.
|
|
|
|
In the case a mechanism is developed to use only a link
|
|
local nexthop, rcIpBgpTmpAfPathAttrNextHopAddr will contain the
|
|
link local nexthop."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.3,
|
|
RFC 4271, Section 5.1.3,
|
|
RFC 2545, Section 3."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 3 }
|
|
|
|
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type for IPv6 link local addresses.
|
|
This is present only when receiving RFC 2545
|
|
style double nexthops.
|
|
|
|
This object is optionally present in BGP
|
|
implementations that do not support IPv6."
|
|
REFERENCE
|
|
"RFC 2545, Section 3."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 4 }
|
|
|
|
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value contains an IPv6 link local address
|
|
and is present only when receiving RFC 2545 style
|
|
double nexthops.
|
|
|
|
This object is optionally present in BGP
|
|
implementations that do not support IPv6."
|
|
REFERENCE
|
|
"RFC 2545, Section 3."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 5 }
|
|
|
|
rcIpBgpTmpAfPathAttrMedPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is true when the MED value was sent in
|
|
the UPDATE message."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 6 }
|
|
|
|
rcIpBgpTmpAfPathAttrMed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This metric is used to discriminate between multiple
|
|
exit points to an adjacent autonomous system. When the MED
|
|
value is absent but has a calculated default value, this
|
|
object will contain the calculated value."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.3.
|
|
RFC 4271, Section 5.1.4."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 7 }
|
|
|
|
rcIpBgpTmpAfPathAttrLocalPref OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The originating BGP4 speakers degree of preference for an
|
|
advertised route. If the route was not sent with a LOCAL_PREF
|
|
value, this object will be absent."
|
|
REFERENCE
|
|
"RFC 4271, Section 4.3.
|
|
RFC 4271, Section 5.1.5."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 8 }
|
|
|
|
rcIpBgpTmpAfPathAttrAtomicAggregate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
atomicAggregatePresent(1),
|
|
atomicAggregateMissing(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this object is set to atomicAggregatePresent,
|
|
the ATOMIC_AGGREGATE Path Attribute is present and
|
|
indicates that the NLRI MUST NOT be made more
|
|
specific."
|
|
REFERENCE
|
|
"RFC 4271, Sections 5.1.6 and 9.1.4."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 9 }
|
|
|
|
rcIpBgpTmpAfPathAttrAggregatorAS OBJECT-TYPE
|
|
SYNTAX InetAutonomousSystemNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AS number of the last BGP4 speaker that performed route
|
|
aggregation. If the AGGREGATOR path attribute is absent, this
|
|
object will not be present in the conceptual row."
|
|
REFERENCE
|
|
"RFC 4271, Section 5.1.7.
|
|
RFC 4271, Section 9.2.2.2."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 10 }
|
|
|
|
rcIpBgpTmpAfPathAttrAggregatorAddr OBJECT-TYPE
|
|
SYNTAX RcIpBgpTmpIdentifierTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the last BGP4 speaker that performed route
|
|
aggregation. If the AGGREGATOR path attribute is absent, this
|
|
object will not be present in the conceptual row."
|
|
REFERENCE
|
|
"RFC 4271, Section 5.1.7.
|
|
RFC 4271, Section 9.2.2.2."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 11 }
|
|
|
|
rcIpBgpTmpAsPathCalcLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the calculated length of the
|
|
AS Path according to the rules of the BGP
|
|
specification. This value is used in route selection."
|
|
REFERENCE
|
|
"RFC 4271, Section 9.1.2.2.a"
|
|
::= { rcIpBgpTmpAfPathAttrEntry 12 }
|
|
|
|
rcIpBgpTmpAsPathIndex OBJECT-TYPE -- not supported
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is a unique index for the decomposed AS Path
|
|
in the rcIpBgpTmpAsPathTable. It is assigned by the
|
|
agent at the point of creation of the rcIpBgpTmpAsPathTable
|
|
row entry. While its value is guaranteed to be unique
|
|
at any time, it is otherwise opaque to the management
|
|
application with respect to its value or the contiguity
|
|
of rcIpBgpTmpAsPathIndex row instance values across rows
|
|
of the rcIpBgpTmpAsPathTable."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 13 }
|
|
|
|
rcIpBgpTmpAsPathString OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string depicting the autonomous system
|
|
path to this network which was received from the
|
|
peer which advertised it. The format of the string
|
|
is implementation-dependent, and should be designed
|
|
for operator readability.
|
|
|
|
Note that SnmpAdminString is only capable of
|
|
representing a maximum of 255 characters. This may
|
|
lead to the string being truncated in the presence of
|
|
a large AS Path. The rcIpBgpTmpAsPathTable will give access
|
|
to the full AS Path."
|
|
::= { rcIpBgpTmpAfPathAttrEntry 14 }
|
|
|
|
--
|
|
-- Mount point for extensions
|
|
--
|
|
|
|
rcIpBgpTmpExtensions OBJECT IDENTIFIER ::= { rcIpBgpTmp 12 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
|
|
rcIpBgpTmpNotification OBJECT IDENTIFIER ::= { rcIpBgpTmp 0 }
|
|
|
|
rcIpBgpTmpEstablishedNotification NOTIFICATION-TYPE
|
|
OBJECTS { bgpPeerRemoteAddr,
|
|
bgpPeerLastError,
|
|
bgpPeerState }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The rcIpBgpTmpEstablishedNotification event is generated
|
|
when the BGP FSM enters the established state.
|
|
|
|
This Notification replaces the bgpEstablished
|
|
Notification and has been replaced by
|
|
rcIpBgpTmpAfEstablishedNotification."
|
|
::= { rcIpBgpTmpNotification 1 }
|
|
|
|
rcIpBgpTmpBackwardTransNotification NOTIFICATION-TYPE
|
|
OBJECTS { bgpPeerRemoteAddr,
|
|
bgpPeerLastError,
|
|
bgpPeerState }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The rcIpBgpBackwardTransNotification event is
|
|
generated when the BGP FSM moves from a higher
|
|
numbered state to a lower numbered state.
|
|
|
|
This Notification replaces the
|
|
bgpBackwardsTransition Notification and has
|
|
been replaced by rcIpBgpTmpAfBackwardsNotification."
|
|
::= { rcIpBgpTmpNotification 2 }
|
|
|
|
rcIpBgpTmpAfEstablishedNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
rcIpBgpTmpPeerAfPeerState,
|
|
rcIpBgpTmpPeerAfLocalPort,
|
|
rcIpBgpTmpPeerAfRemotePort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGP Established event is generated when
|
|
the BGP FSM enters the established state."
|
|
::= { rcIpBgpTmpNotification 3 }
|
|
|
|
rcIpBgpTmpAfBackwardTransitionNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
rcIpBgpTmpPeerAfPeerState,
|
|
rcIpBgpTmpPeerAfLocalPort,
|
|
rcIpBgpTmpPeerAfRemotePort,
|
|
rcIpBgpTmpPeerAfLastErrorCodeReceived,
|
|
rcIpBgpTmpPeerAfLastErrorSubCodeReceived,
|
|
rcIpBgpTmpPeerAfLastErrorReceivedText
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGPBackwardTransition Event is generated
|
|
when the BGP FSM moves from a higher numbered
|
|
state to a lower numbered state.
|
|
|
|
Due to the nature of the BGP state machine, an implementation MAY
|
|
rate limit the generation of this event. An implementation MAY
|
|
also generate this notification ONLY when the state machine moves
|
|
out of the established state. An implementation should document
|
|
its specific behavior."
|
|
::= { rcIpBgpTmpNotification 4 }
|
|
|
|
-- Mpls Configuration Table
|
|
|
|
rcIpMpls OBJECT IDENTIFIER ::= { rcIp 102 }
|
|
|
|
-- MPLS Group
|
|
|
|
rcIpMplsGlobalGroup OBJECT IDENTIFIER ::= { rcIpMpls 1 }
|
|
|
|
rcIpMplsGlobalAdminStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Disable or Enable MPLS globally"
|
|
DEFVAL { disable }
|
|
::= { rcIpMplsGlobalGroup 1 }
|
|
|
|
rcIpMplsGlobalRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP address of the interface to be used as router-id"
|
|
::= { rcIpMplsGlobalGroup 2 }
|
|
|
|
rcIpMplsGlobalAutomaticBeLsp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to control automatic generation of next hop LSP."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsGlobalGroup 3 }
|
|
|
|
rcIpMplsGlobalLspMerge OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsGlobalGroup 4 }
|
|
|
|
rcIpMplsGlobalDiffServDef OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsGlobalGroup 5 }
|
|
|
|
rcIpMplsGlobalTtl OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set the time to live in hops when IP packets
|
|
are being encapsulated in MPLS"
|
|
::= { rcIpMplsGlobalGroup 6 }
|
|
|
|
rcIpMplsGlobalLabelMgmtFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set the time to live in hops when IP packets
|
|
are being encapsulated in MPLS"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsGlobalGroup 7 }
|
|
|
|
rcIpMplsGlobalSessionMgmtFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set the time to live in hops when IP packets
|
|
are being encapsulated in MPLS"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsGlobalGroup 8 }
|
|
|
|
rcIpMplsGlobalLspMgmtFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set the time to live in hops when IP packets
|
|
are being encapsulated in MPLS"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsGlobalGroup 9 }
|
|
|
|
rcIpMplsGlobalTrafficControlFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To set the time to live in hops when IP packets
|
|
are being encapsulated in MPLS"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsGlobalGroup 10 }
|
|
|
|
rcIpMplsGlobalInactiveLspRestartTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Timer to initiate setting up a tunnel that previously failed."
|
|
DEFVAL { 30 }
|
|
::= { rcIpMplsGlobalGroup 11 }
|
|
|
|
rcIpMplsGlobalInactiveLspRestartCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This parameter - if set to
|
|
some non-zero (1-255) value, after that many failed trial of
|
|
initiating a tunnel it will stop re-trying. But if set to 0(zero)
|
|
it will keep on trying as before. The default value is 0(zero)
|
|
for backward compatability."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsGlobalGroup 12 }
|
|
|
|
rcIpMplsInterfaceTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of Mpls Interface Table"
|
|
::= { rcIpMpls 2 }
|
|
|
|
rcIpMplsInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of configured Mpls Interfaces."
|
|
::= { rcIpMpls 3 }
|
|
|
|
rcIpMplsInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpMpls Interfaces In Table."
|
|
INDEX { rcIpMplsInterfaceLay3Addr, rcIpMplsInterfaceLay3Mask }
|
|
::= { rcIpMplsInterfaceTable 1 }
|
|
|
|
RcIpMplsInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpMplsInterfaceLay3Addr IpAddress,
|
|
rcIpMplsInterfaceLay3Mask IpAddress,
|
|
rcIpMplsInterfaceIndex Integer32,
|
|
rcIpMplsInterfaceAdminStatus EnableValue,
|
|
rcIpMplsInterfaceIndLblDistMode INTEGER,
|
|
rcIpMplsInterfaceConsLblRetenMode INTEGER,
|
|
rcIpMplsInterfaceImdLblUseMode INTEGER,
|
|
rcIpMplsInterfaceNoRouteReqRetryMode TruthValue,
|
|
rcIpMplsInterfacePenultimatePopRequest TruthValue,
|
|
rcIpMplsInterfacePropogateLabelReleaseRequest TruthValue,
|
|
rcIpMplsInterfaceOnDemandAdvMode INTEGER,
|
|
rcIpMplsInterfaceLabelRequestMode INTEGER,
|
|
rcIpMplsInterfaceMtu INTEGER,
|
|
rcIpMplsInterfaceLabelProtocol INTEGER,
|
|
rcIpMplsInterfaceTraceFlag TruthValue,
|
|
rcIpMplsInterfaceRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMplsInterfaceLay3Addr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Layer 3 address for the MPLS interface."
|
|
::= { rcIpMplsInterfaceEntry 1 }
|
|
|
|
rcIpMplsInterfaceLay3Mask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Layer 3 mask for the MPLS interface."
|
|
::= { rcIpMplsInterfaceEntry 2 }
|
|
|
|
rcIpMplsInterfaceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Interface index for the IP interface."
|
|
::= { rcIpMplsInterfaceEntry 3 }
|
|
|
|
rcIpMplsInterfaceAdminStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether the MPLS interface is enabled or not."
|
|
DEFVAL { disable }
|
|
::= { rcIpMplsInterfaceEntry 4 }
|
|
|
|
rcIpMplsInterfaceIndLblDistMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
independent(1),
|
|
ordered(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " Indicates if the label distribution mode is independent or ordered."
|
|
DEFVAL { independent }
|
|
::= { rcIpMplsInterfaceEntry 5 }
|
|
|
|
rcIpMplsInterfaceConsLblRetenMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
conservative(1),
|
|
liberal(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates if conservative or liberal retention mode is used for the MPLS interface."
|
|
DEFVAL { liberal }
|
|
::= { rcIpMplsInterfaceEntry 6 }
|
|
|
|
rcIpMplsInterfaceImdLblUseMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
immediate(1),
|
|
notImmediate(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates what label-use-mode is used by the MPLS interface."
|
|
DEFVAL { immediate }
|
|
::= { rcIpMplsInterfaceEntry 7 }
|
|
|
|
rcIpMplsInterfaceNoRouteReqRetryMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsInterfaceEntry 8 }
|
|
|
|
rcIpMplsInterfacePenultimatePopRequest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Flag to indicate whether to give implicit
|
|
NULL labels for local networks."
|
|
DEFVAL { true }
|
|
::= { rcIpMplsInterfaceEntry 9 }
|
|
|
|
rcIpMplsInterfacePropogateLabelReleaseRequest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsInterfaceEntry 10 }
|
|
|
|
rcIpMplsInterfaceLabelRequestMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
requestNever(1),
|
|
requestWhenNeeded(2),
|
|
requestOnRequest(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates the label requiest mode used by the MPLS interface."
|
|
DEFVAL { requestNever }
|
|
::= { rcIpMplsInterfaceEntry 11 }
|
|
|
|
rcIpMplsInterfaceOnDemandAdvMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
downstreamOnDemand(1),
|
|
downstreamUnsolicited(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates the label advertise mode used by the MPLS interface."
|
|
DEFVAL { downstreamUnsolicited }
|
|
::= { rcIpMplsInterfaceEntry 12 }
|
|
|
|
rcIpMplsInterfaceMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (64..1518)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
::= { rcIpMplsInterfaceEntry 13 }
|
|
|
|
rcIpMplsInterfaceLabelProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ldp(1),
|
|
rsvp(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates the label protocol used by the interface."
|
|
DEFVAL { ldp }
|
|
::= { rcIpMplsInterfaceEntry 14 }
|
|
|
|
rcIpMplsInterfaceTraceFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Flag used for tracing."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsInterfaceEntry 15 }
|
|
|
|
rcIpMplsInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row Status for create/delete"
|
|
::= { rcIpMplsInterfaceEntry 16 }
|
|
|
|
|
|
rcIpMplsRsvpGroup OBJECT IDENTIFIER ::= { rcIpMpls 4 }
|
|
|
|
rcIpMplsRsvpAdminStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "State of global RSVP - enabled or disabled"
|
|
DEFVAL { disable }
|
|
::= { rcIpMplsRsvpGroup 1 }
|
|
|
|
rcIpMplsRsvpPathUpdateTime OBJECT-TYPE
|
|
SYNTAX INTEGER (2..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds to update
|
|
PATH soft states"
|
|
DEFVAL { 30 }
|
|
::= { rcIpMplsRsvpGroup 2 }
|
|
|
|
rcIpMplsRsvpResvUpdateTime OBJECT-TYPE
|
|
SYNTAX INTEGER (2..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in seconds to update
|
|
RESV soft states"
|
|
DEFVAL { 30 }
|
|
::= { rcIpMplsRsvpGroup 3 }
|
|
|
|
rcIpMplsRsvpHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER (2..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in milli-seconds to send hello message"
|
|
DEFVAL { 3 }
|
|
::= { rcIpMplsRsvpGroup 4 }
|
|
|
|
rcIpMplsRsvpBlockStateAgingTime OBJECT-TYPE
|
|
SYNTAX INTEGER (2..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PSB blockade state aging time in seconds"
|
|
DEFVAL { 60 }
|
|
::= { rcIpMplsRsvpGroup 5 }
|
|
|
|
rcIpMplsRsvpMaxBundleMsgSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum BUNDLE message size"
|
|
DEFVAL { 1500 }
|
|
::= { rcIpMplsRsvpGroup 6 }
|
|
|
|
rcIpMplsRsvpMaxBundleMsgTime OBJECT-TYPE
|
|
SYNTAX INTEGER (2..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum time in milli-seconds for an outgoing
|
|
RSVP message to wait before being sent in the outgoing
|
|
BUNDLE message"
|
|
DEFVAL { 200 }
|
|
::= { rcIpMplsRsvpGroup 7 }
|
|
|
|
rcIpMplsRsvpMaxAckMsgTime OBJECT-TYPE
|
|
SYNTAX INTEGER (2..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum time in milli-seconds for an outgoing
|
|
RSVP MESSAGE_ID_ACK/ RSVP MESSAGE_ID_NACK
|
|
object to wait before being sent as a piggy-back
|
|
in an unrelated RSVP message or in a separate ACK message"
|
|
DEFVAL { 200 }
|
|
::= { rcIpMplsRsvpGroup 8 }
|
|
|
|
rcIpMplsRsvpMaxAckMsgs OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of RSVP MESSAGE_ID_ACK/ RSVP MESSAGE_ID_NACK
|
|
objects to be sent in a single RSVP ACK message"
|
|
DEFVAL { 24 }
|
|
::= { rcIpMplsRsvpGroup 9 }
|
|
|
|
rcIpMplsRsvpMaxMsgIdListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum size of MESSAGE_ID_LIST object in MESSAGE_IDs"
|
|
DEFVAL { 32 }
|
|
::= { rcIpMplsRsvpGroup 10 }
|
|
|
|
rcIpMplsRsvpMaxMsgIdListTime OBJECT-TYPE
|
|
SYNTAX INTEGER (2..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum time in milli-seconds for an outgoing
|
|
RSVP refresh message to wait before being sent out"
|
|
DEFVAL { 200 }
|
|
::= { rcIpMplsRsvpGroup 11 }
|
|
|
|
rcIpMplsRsvpMaxPiggyBackMsgAcks OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of RSVP MESSAGE_ID_ACK/
|
|
RSVP MESSAGE_ID_NACK objects to be piggy-backed on a
|
|
single RSVP non-ACK message"
|
|
DEFVAL { 4 }
|
|
::= { rcIpMplsRsvpGroup 12 }
|
|
|
|
rcIpMplsRsvpPathAgingTimeMult OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PATH soft state aging time multiplier - how many times
|
|
to miss PATH refresh before considering PSB aged out"
|
|
DEFVAL { 3 }
|
|
::= { rcIpMplsRsvpGroup 13 }
|
|
|
|
rcIpMplsRsvpResvAgingTimeMult OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "RESV soft state aging time multiplier - how many times
|
|
to miss RESV refresh before considering RSB filterspec aged out"
|
|
DEFVAL { 3 }
|
|
::= { rcIpMplsRsvpGroup 14 }
|
|
|
|
rcIpMplsRsvpHelloAgingTimeMult OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Hello aging time multiplier - how many times
|
|
to miss Hello/HelloAck message before considering link down"
|
|
DEFVAL { 3 }
|
|
::= { rcIpMplsRsvpGroup 15 }
|
|
|
|
rcIpMplsRsvpPathVectorLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Path vector limit"
|
|
DEFVAL { 32 }
|
|
::= { rcIpMplsRsvpGroup 16 }
|
|
|
|
rcIpMplsRsvpHopCountLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum hop count"
|
|
DEFVAL { 32 }
|
|
::= { rcIpMplsRsvpGroup 17 }
|
|
|
|
rcIpMplsRsvpRapidRetransTime OBJECT-TYPE
|
|
SYNTAX INTEGER (2..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Initial rapid re-transmission time in milli-seconds"
|
|
DEFVAL { 1000 }
|
|
::= { rcIpMplsRsvpGroup 18 }
|
|
|
|
rcIpMplsRsvpRapidRetransIncrement OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Rapid re-transmission increment "
|
|
DEFVAL { 2 }
|
|
::= { rcIpMplsRsvpGroup 19 }
|
|
|
|
rcIpMplsRsvpRapidRetransLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of attempts to re-transmit message"
|
|
DEFVAL { 3 }
|
|
::= { rcIpMplsRsvpGroup 20 }
|
|
|
|
rcIpMplsRsvpReqResvConfFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Require RSVP ResvConf message on successful reservations"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpGroup 21 }
|
|
|
|
rcIpMplsRsvpPathRemoveFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable Path_State_Removed flag using in ERROR_SPEC object
|
|
of PATH_ERR message"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpGroup 22 }
|
|
|
|
rcIpMplsRsvpProtectDomainFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Protection Domain support"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpGroup 23 }
|
|
|
|
rcIpMplsRsvpPathTraceFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable PATH direction tracing"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpGroup 24 }
|
|
|
|
rcIpMplsRsvpResvTraceFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable RESV direction tracing"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpGroup 25 }
|
|
|
|
rcIpMplsRsvpTrafficControlTraceFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable traffic control tracing"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpGroup 26 }
|
|
|
|
rcIpMplsRsvpSessionTraceFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable session management tracing"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpGroup 27 }
|
|
|
|
rcIpMplsLdpGroup OBJECT IDENTIFIER ::= { rcIpMpls 5 }
|
|
|
|
rcIpMplsLdpAdminStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates qhetehr global LDP is enabled or disabled."
|
|
DEFVAL { disable }
|
|
::= { rcIpMplsLdpGroup 1 }
|
|
|
|
rcIpMplsLdpHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER (15..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Keep alive time for LDP peers."
|
|
DEFVAL { 60 }
|
|
::= { rcIpMplsLdpGroup 2 }
|
|
|
|
rcIpMplsLdpHelloHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER (15..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time for receiving link hello messages from peer."
|
|
DEFVAL { 15 }
|
|
::= { rcIpMplsLdpGroup 3 }
|
|
|
|
rcIpMplsLdpHelloInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Frequency of sending hello messages to peer."
|
|
DEFVAL { 5 }
|
|
::= { rcIpMplsLdpGroup 4 }
|
|
|
|
rcIpMplsLdpMaxHops OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of LSP hops for setting up an LSP."
|
|
DEFVAL { 32 }
|
|
::= { rcIpMplsLdpGroup 5 }
|
|
|
|
rcIpMplsLdpPathVectorLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Max hop count for loop detection."
|
|
DEFVAL { 32 }
|
|
::= { rcIpMplsLdpGroup 6 }
|
|
|
|
rcIpMplsLdpTgtHelloHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER (15..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time for receiving targetted link hello messages."
|
|
DEFVAL { 45 }
|
|
::= { rcIpMplsLdpGroup 7 }
|
|
|
|
|
|
rcIpMplsLdpLoopDetFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to set loop detection capability."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsLdpGroup 8 }
|
|
|
|
rcIpMplsLdpLblMergeFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsLdpGroup 9 }
|
|
|
|
rcIpMplsLdpAuthFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsLdpGroup 10 }
|
|
|
|
rcIpMplsLdpInterfaceTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of Mpls LDP Interface Table"
|
|
::= { rcIpMpls 6 }
|
|
|
|
rcIpMplsLdpInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsLdpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of configured Mpls LDP Interfaces."
|
|
::= { rcIpMpls 7 }
|
|
|
|
rcIpMplsLdpInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsLdpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpMpls LDP Interfaces In Table."
|
|
INDEX { rcIpMplsLdpInterfaceLay3Addr, rcIpMplsLdpInterfaceLay3Mask }
|
|
::= { rcIpMplsLdpInterfaceTable 1 }
|
|
|
|
RcIpMplsLdpInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpMplsLdpInterfaceLay3Addr IpAddress,
|
|
rcIpMplsLdpInterfaceLay3Mask IpAddress,
|
|
rcIpMplsLdpInterfaceIndex Integer32,
|
|
rcIpMplsLdpInterfaceTargetHelloFlag TruthValue,
|
|
rcIpMplsLdpInterfaceTargetResponseFlag TruthValue,
|
|
rcIpMplsLdpInterfaceNonTtlLspFlag TruthValue,
|
|
rcIpMplsLdpInterfaceRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMplsLdpInterfaceLay3Addr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Layer 3 address of LDP interface."
|
|
::= { rcIpMplsLdpInterfaceEntry 1 }
|
|
|
|
rcIpMplsLdpInterfaceLay3Mask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Layer3 mask for LDP interface."
|
|
::= { rcIpMplsLdpInterfaceEntry 2 }
|
|
|
|
rcIpMplsLdpInterfaceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Interface index for LDP interface."
|
|
::= { rcIpMplsLdpInterfaceEntry 3 }
|
|
|
|
rcIpMplsLdpInterfaceTargetHelloFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Flag for enabling target hellos."
|
|
DEFVAL { true }
|
|
::= { rcIpMplsLdpInterfaceEntry 4 }
|
|
|
|
rcIpMplsLdpInterfaceTargetResponseFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Flag to enable target response messgaes."
|
|
DEFVAL { true }
|
|
::= { rcIpMplsLdpInterfaceEntry 5 }
|
|
|
|
rcIpMplsLdpInterfaceNonTtlLspFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
::= { rcIpMplsLdpInterfaceEntry 6 }
|
|
|
|
rcIpMplsLdpInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for the LDP interface."
|
|
::= { rcIpMplsLdpInterfaceEntry 7 }
|
|
|
|
rcIpMplsRsvpInterfaceTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of Mpls RSVP Interface Table"
|
|
::= { rcIpMpls 8 }
|
|
|
|
rcIpMplsRsvpInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsRsvpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of configured Mpls RSVP Interfaces."
|
|
::= { rcIpMpls 9 }
|
|
|
|
rcIpMplsRsvpInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsRsvpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpMpls RSVP Interfaces In Table."
|
|
INDEX { rcIpMplsRsvpInterfaceLay3Addr, rcIpMplsRsvpInterfaceLay3Mask }
|
|
::= { rcIpMplsRsvpInterfaceTable 1 }
|
|
|
|
RcIpMplsRsvpInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpMplsRsvpInterfaceLay3Addr IpAddress,
|
|
rcIpMplsRsvpInterfaceLay3Mask IpAddress,
|
|
rcIpMplsRsvpInterfaceIndex Integer32,
|
|
rcIpMplsRsvpInterfaceAuthFlag TruthValue,
|
|
rcIpMplsRsvpInterfaceHelloFlag TruthValue,
|
|
rcIpMplsRsvpInterfaceRefreshReductionFlag TruthValue,
|
|
rcIpMplsRsvpInterfaceMemoryReductionFlag TruthValue,
|
|
rcIpMplsRsvpInterfaceReliableFlag TruthValue,
|
|
rcIpMplsRsvpInterfaceEPolicingFlag TruthValue,
|
|
rcIpMplsRsvpInterfaceRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMplsRsvpInterfaceLay3Addr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Layer 3 address for RSVP interface."
|
|
::= { rcIpMplsRsvpInterfaceEntry 1 }
|
|
|
|
rcIpMplsRsvpInterfaceLay3Mask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Layer 3 mask for RSVP interface."
|
|
::= { rcIpMplsRsvpInterfaceEntry 2 }
|
|
|
|
rcIpMplsRsvpInterfaceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index for RSVP interface table."
|
|
::= { rcIpMplsRsvpInterfaceEntry 3 }
|
|
|
|
rcIpMplsRsvpInterfaceAuthFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpInterfaceEntry 4 }
|
|
|
|
rcIpMplsRsvpInterfaceHelloFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Flag to enable RSVP interface hello."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpInterfaceEntry 5 }
|
|
|
|
rcIpMplsRsvpInterfaceRefreshReductionFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpInterfaceEntry 6 }
|
|
|
|
rcIpMplsRsvpInterfaceMemoryReductionFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpInterfaceEntry 7 }
|
|
|
|
rcIpMplsRsvpInterfaceReliableFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpInterfaceEntry 8 }
|
|
|
|
rcIpMplsRsvpInterfaceEPolicingFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Not used in this release."
|
|
DEFVAL { false }
|
|
::= { rcIpMplsRsvpInterfaceEntry 9 }
|
|
|
|
rcIpMplsRsvpInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for RSVP interface."
|
|
::= { rcIpMplsRsvpInterfaceEntry 10 }
|
|
|
|
rcIpMplsLdpTargetAddrTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of Mpls LDP target address Table"
|
|
::= { rcIpMpls 10 }
|
|
|
|
rcIpMplsLdpTargetAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsLdpTargetAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of configured Mpls LDP target addresses."
|
|
::= { rcIpMpls 11 }
|
|
|
|
rcIpMplsLdpTargetAddrEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsLdpTargetAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpMpls LDP target addresses In Table."
|
|
INDEX { rcIpMplsLdpTargetAddrBaseAddr, rcIpMplsLdpTargetAddrTgtAddr }
|
|
::= { rcIpMplsLdpTargetAddrTable 1 }
|
|
|
|
RcIpMplsLdpTargetAddrEntry ::=
|
|
SEQUENCE {
|
|
rcIpMplsLdpTargetAddrBaseAddr IpAddress,
|
|
rcIpMplsLdpTargetAddrTgtAddr IpAddress,
|
|
rcIpMplsLdpTargetAddrRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMplsLdpTargetAddrBaseAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The LDP interface IP address for which target address should
|
|
be configured"
|
|
::= { rcIpMplsLdpTargetAddrEntry 1 }
|
|
|
|
rcIpMplsLdpTargetAddrTgtAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP address configured to be the LDP target address"
|
|
::= { rcIpMplsLdpTargetAddrEntry 2 }
|
|
|
|
rcIpMplsLdpTargetAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row Status for LDP target address table."
|
|
::= { rcIpMplsLdpTargetAddrEntry 3 }
|
|
|
|
rcIpMplsTunnelGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsTunnelGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of Tunnel Groups."
|
|
::= { rcIpMpls 12 }
|
|
|
|
rcIpMplsTunnelGroupEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsTunnelGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpMpls tunnel group In Table."
|
|
INDEX { rcIpMplsTunnelGroupId }
|
|
::= { rcIpMplsTunnelGroupTable 1 }
|
|
|
|
RcIpMplsTunnelGroupEntry ::=
|
|
SEQUENCE {
|
|
rcIpMplsTunnelGroupId INTEGER,
|
|
rcIpMplsTunnelGroupDestAddr IpAddress,
|
|
rcIpMplsTunnelGroupPrimaryTunnel DisplayString,
|
|
rcIpMplsTunnelGroupActiveTunnel INTEGER,
|
|
rcIpMplsTunnelGroupPersistentFlag TruthValue,
|
|
rcIpMplsTunnelGroupOperation INTEGER,
|
|
rcIpMplsTunnelGroupTunnelList DisplayString,
|
|
rcIpMplsTunnelGroupFtnList DisplayString,
|
|
rcIpMplsTunnelGroupBgpNeighbor Integer32,
|
|
rcIpMplsTunnelGroupRowStatus RowStatus,
|
|
rcIpMplsTunnelGroupBackupTunnel DisplayString
|
|
}
|
|
|
|
|
|
rcIpMplsTunnelGroupId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Tunnel Group Identifier"
|
|
::= { rcIpMplsTunnelGroupEntry 1 }
|
|
|
|
|
|
rcIpMplsTunnelGroupDestAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Group the tunnels with same destination IP address into the
|
|
tunnel group"
|
|
::= { rcIpMplsTunnelGroupEntry 2 }
|
|
|
|
rcIpMplsTunnelGroupPrimaryTunnel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "List of primary tunnels contained in the tunnel group, diplayed
|
|
in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>]"
|
|
::= { rcIpMplsTunnelGroupEntry 3 }
|
|
|
|
rcIpMplsTunnelGroupActiveTunnel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Active tunnel id in the Tunnel Group"
|
|
::= { rcIpMplsTunnelGroupEntry 4 }
|
|
|
|
rcIpMplsTunnelGroupPersistentFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Tunnel Group Persistent Flag"
|
|
DEFVAL { true }
|
|
::= { rcIpMplsTunnelGroupEntry 5 }
|
|
|
|
rcIpMplsTunnelGroupOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
addTunnel(1),
|
|
remTunnel(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Add tunnel to the Tunnel Group or remove tunnel from the
|
|
tunnel group"
|
|
::= { rcIpMplsTunnelGroupEntry 6 }
|
|
|
|
rcIpMplsTunnelGroupTunnelList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "List of Tunnels contained in the tunnel group, diplayed
|
|
in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>], such as string
|
|
2,4,5 indicated the tunnel group contains tunnel 2, tunnel 4,
|
|
and tunnel 5"
|
|
::= { rcIpMplsTunnelGroupEntry 7 }
|
|
|
|
rcIpMplsTunnelGroupFtnList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of fecs bineded to the tunnel group, the display
|
|
format is same as rcIpMplsTunnelGroupTunnelList"
|
|
::= { rcIpMplsTunnelGroupEntry 8 }
|
|
|
|
rcIpMplsTunnelGroupBgpNeighbor OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BGP neigbors associated with the tunnel group"
|
|
::= { rcIpMplsTunnelGroupEntry 9 }
|
|
|
|
rcIpMplsTunnelGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete the tunnel group."
|
|
::= { rcIpMplsTunnelGroupEntry 10 }
|
|
|
|
rcIpMplsTunnelGroupBackupTunnel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Backup tunnel id in the Tunnel Group displayed
|
|
in the format <tunnelId/priority>"
|
|
::= { rcIpMplsTunnelGroupEntry 11 }
|
|
|
|
-- Mpls TE Group
|
|
|
|
rcIpMplsTeGroup OBJECT IDENTIFIER ::= { rcIpMpls 13 }
|
|
|
|
rcIpMplsTeFloodThresholdStart OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "First TE flooding threshold for significant bandwidth
|
|
change in percent."
|
|
DEFVAL { 70 }
|
|
::= { rcIpMplsTeGroup 1 }
|
|
|
|
rcIpMplsTeFloodThresholdDelta OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Delta TE flooding threshold for significant
|
|
Bandwidth change in percent. After start
|
|
threshold is hit every delta change in link
|
|
bandwidth results in flooding link's TE
|
|
information."
|
|
DEFVAL { 5}
|
|
::= { rcIpMplsTeGroup 2 }
|
|
|
|
-- Mpls TE Interface table
|
|
|
|
rcIpMplsTeInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsTeInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "rcIpMplsInterface Traffic-Eng table. This table
|
|
contains rows which are traffic-eng configuration
|
|
parameters for the link."
|
|
::= { rcIpMpls 14 }
|
|
|
|
rcIpMplsTeInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsTeInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpMplsInterface Te Table."
|
|
INDEX { rcIpMplsTeInterfaceLay3Addr}
|
|
::= { rcIpMplsTeInterfaceTable 1 }
|
|
|
|
RcIpMplsTeInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpMplsTeInterfaceLay3Addr IpAddress,
|
|
rcIpMplsTeInterfaceLay3Mask IpAddress,
|
|
rcIpMplsTeInterfaceIndex Integer32,
|
|
rcIpMplsTeInterfaceIgp INTEGER,
|
|
rcIpMplsTeInterfaceMetric INTEGER,
|
|
rcIpMplsTeInterfaceMaxBandwidth INTEGER,
|
|
rcIpMplsTeInterfaceMaxReservableBandwidth INTEGER,
|
|
rcIpMplsTeInterfaceResourceColor OCTET STRING
|
|
}
|
|
|
|
rcIpMplsTeInterfaceLay3Addr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Layer 3 address for the MPLS interface."
|
|
::= { rcIpMplsTeInterfaceEntry 1 }
|
|
|
|
rcIpMplsTeInterfaceLay3Mask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Layer 3 mask for the MPLS interface."
|
|
::= { rcIpMplsTeInterfaceEntry 2 }
|
|
|
|
rcIpMplsTeInterfaceIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Interface index for the IP interface."
|
|
::= { rcIpMplsTeInterfaceEntry 3 }
|
|
|
|
rcIpMplsTeInterfaceIgp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
ospf(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Traffic-eng IGP protocol to use on link."
|
|
DEFVAL { none }
|
|
::= { rcIpMplsTeInterfaceEntry 4 }
|
|
|
|
rcIpMplsTeInterfaceMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Traffic-eng metric to assign to the link."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsTeInterfaceEntry 5}
|
|
|
|
rcIpMplsTeInterfaceMaxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum bandwidth on the link in bits/sec in the
|
|
direction outwards from the local system."
|
|
DEFVAL { 1000000000 }
|
|
::= { rcIpMplsTeInterfaceEntry 6}
|
|
|
|
rcIpMplsTeInterfaceMaxReservableBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum reservable bandwidth on the link in bits/sec in
|
|
the direction outwards from the local system."
|
|
DEFVAL { 1000000000}
|
|
::= { rcIpMplsTeInterfaceEntry 7 }
|
|
|
|
rcIpMplsTeInterfaceResourceColor OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Resource class/color which represents administrative group
|
|
membership for the link. The integer value represents the
|
|
format of a hexadecimal 32-bit mask. A link that is a member
|
|
of more than one administrative group will have multiple
|
|
mask bits set."
|
|
::= { rcIpMplsTeInterfaceEntry 8 }
|
|
|
|
rcIpMplsTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of Tunnels with label record info ."
|
|
::= { rcIpMpls 15 }
|
|
|
|
rcIpMplsTunnelEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpMpls tunnel In Table."
|
|
INDEX { rcIpMplsTunnelId }
|
|
::= { rcIpMplsTunnelTable 1 }
|
|
|
|
RcIpMplsTunnelEntry ::=
|
|
SEQUENCE {
|
|
rcIpMplsTunnelId INTEGER,
|
|
rcIpMplsTunnelLabelRecordFlag TruthValue,
|
|
rcIpMplsTunnelRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMplsTunnelId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Tunnel Identifier"
|
|
::= { rcIpMplsTunnelEntry 1 }
|
|
|
|
rcIpMplsTunnelLabelRecordFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Tunnel Identifier"
|
|
DEFVAL { false }
|
|
::= { rcIpMplsTunnelEntry 2 }
|
|
|
|
rcIpMplsTunnelRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Creation or deletion of row"
|
|
::= { rcIpMplsTunnelEntry 3 }
|
|
|
|
-- MPLS tunnel Enterprise Extensions table.
|
|
|
|
rcIpMplsTunnelExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsTunnelExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The mplsTunnelExtTable provides enterprise
|
|
extension options for a mplsTunnelEntry that has
|
|
be created for a MPLS tunnel. The mplsTunnelEntry
|
|
must be created apriori."
|
|
::= { rcIpMpls 16 }
|
|
|
|
rcIpMplsTunnelExtEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsTunnelExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpMpls Tunnel Ext Table."
|
|
INDEX {rcIpMplsTunnelExtIndex, rcIpMplsTunnelExtInstance,
|
|
rcIpMplsTunnelExtIngressLSRId, rcIpMplsTunnelExtEgressLSRId
|
|
}
|
|
::= { rcIpMplsTunnelExtTable 1 }
|
|
|
|
RcIpMplsTunnelExtEntry ::=
|
|
SEQUENCE {
|
|
rcIpMplsTunnelExtIndex MplsTunnelIndex,
|
|
rcIpMplsTunnelExtInstance MplsTunnelInstanceIndex,
|
|
rcIpMplsTunnelExtIngressLSRId MplsLsrId,
|
|
rcIpMplsTunnelExtEgressLSRId MplsLsrId,
|
|
rcIpMplsTunnelExtFrrTableIndex Unsigned32,
|
|
rcIpMplsTunnelExtRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMplsTunnelExtIndex OBJECT-TYPE
|
|
SYNTAX MplsTunnelIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Uniquely identifies this row.
|
|
This an index object for the mplsTunnelExtTable entry that
|
|
in part also specifies the mpls tunnel entry with which this
|
|
|
|
tunnel extension entry is associated. The value of this
|
|
object should mimic the value of mplsTunnelIndex of the
|
|
MplsTunnelEntry of the mpls tunnel for which this extended
|
|
tunnel table entry row is to be applied."
|
|
::= { rcIpMplsTunnelExtEntry 1 }
|
|
|
|
rcIpMplsTunnelExtInstance OBJECT-TYPE
|
|
SYNTAX MplsTunnelInstanceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Uniquely identifies an instance of a tunnel's extended
|
|
entry. This an index object for the mplsTunnelExtTable entry
|
|
that
|
|
in part specifies the mpls tunnel with which this tunnel
|
|
extension entry is associated. Uniquely The value of this
|
|
object should be equal to the value of MplsTunnelInstance
|
|
of the MplsTunnelEntry of the mpls tunnel for which this
|
|
extended tunnel table row is to be applied."
|
|
::= { rcIpMplsTunnelExtEntry 2 }
|
|
|
|
rcIpMplsTunnelExtEgressLSRId OBJECT-TYPE
|
|
SYNTAX MplsLsrId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The purpose of this object is to uniquely identity a
|
|
tunnel within a network to which this extended tunnel
|
|
table entry should apply. This an index object for the
|
|
mplsTunnelExtTable entry that in part specifies the mpls
|
|
tunnel with which this tunnel extension entry is associated.
|
|
The value of this object should mimic the value of
|
|
mplsTunnelIngressLSRId of the MplsTunnelEntry of the mpls
|
|
tunnel for which this extended tunnel table row is to be
|
|
applied. Please reference mplsTunnelIngressLSRId for
|
|
additional information on it which is mimiced here."
|
|
::= { rcIpMplsTunnelExtEntry 3 }
|
|
|
|
rcIpMplsTunnelExtIngressLSRId OBJECT-TYPE
|
|
SYNTAX MplsLsrId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Specifies the egress LSR id for which this extended tunnel
|
|
table entry should apply. This is an index object for the
|
|
mplsTunnelExtTable entry that in part specifies the mpls
|
|
tunnel with which this tunnel extension entry is associated.
|
|
The value of this object should mimic the value of
|
|
mplsTunnelEngressLSRId of the MplsTunnelEntry of the mpls
|
|
tunnel for which this extended tunnel table row is to be
|
|
applied."
|
|
::= { rcIpMplsTunnelExtEntry 4 }
|
|
|
|
rcIpMplsTunnelExtFrrTableIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Index into the mplsTunnelFrrTable entry that
|
|
specifies the frr path to use for the tunnel that implied
|
|
by the index objects of this row entry.
|
|
Specifying a frr path to use is optional."
|
|
::= { rcIpMplsTunnelExtEntry 5 }
|
|
|
|
rcIpMplsTunnelExtRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { rcIpMplsTunnelExtEntry 6 }
|
|
|
|
|
|
-- MPLS tunnel Frr Path table
|
|
|
|
rcIpMplsTunnelFrrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsTunnelFrrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The rcIpMplsTunnelFrrTable is used to indicate the
|
|
frr constraints for a frr detour LSP for a tunnel
|
|
specified as row entry in the mplsTunnelTable.The
|
|
frr constraints are established viasignaling, for
|
|
the outgoing direction of the tunnel. Each row in
|
|
this table is indexed by rcIpMplsTunnelFrrListIndex.
|
|
In this implementation it is intended that one row
|
|
entry may used as a frr template for multiple tunnels.
|
|
Conversely a row entry may be created for each tunnel,
|
|
or there may be a combination of both styles, one to one,
|
|
and one to many in the relationship between a row
|
|
entry of this table and tunnel(s)."
|
|
::= { rcIpMpls 17 }
|
|
|
|
rcIpMplsTunnelFrrEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsTunnelFrrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in this table represents a tunnel frr path. An
|
|
entry is created by a network administrator for
|
|
signaled LSP with frr path set up by an MPLS signaling proto
|
|
col."
|
|
INDEX { rcIpMplsTunnelFrrListIndex }
|
|
::= { rcIpMplsTunnelFrrTable 1 }
|
|
|
|
RcIpMplsTunnelFrrEntry ::= SEQUENCE {
|
|
rcIpMplsTunnelFrrListIndex Unsigned32,
|
|
rcIpMplsTunnelFrrSetupPrio INTEGER,
|
|
rcIpMplsTunnelFrrHoldingPrio INTEGER,
|
|
rcIpMplsTunnelFrrHopLimit INTEGER,
|
|
rcIpMplsTunnelFrrBandwidth INTEGER,
|
|
rcIpMplsTunnelFrrProtectionType INTEGER,
|
|
rcIpMplsTunnelFrrExclAnyAffinity OCTET STRING,
|
|
rcIpMplsTunnelFrrInclAnyAffinity OCTET STRING,
|
|
rcIpMplsTunnelFrrInclAllAffinity OCTET STRING,
|
|
rcIpMplsTunnelFrrLegacyFlag TruthValue,
|
|
rcIpMplsTunnelFrrRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMplsTunnelFrrListIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Primary index into this table identifying a particular
|
|
row entry of frr detour LSP contraints."
|
|
::= { rcIpMplsTunnelFrrEntry 1 }
|
|
|
|
rcIpMplsTunnelFrrSetupPrio OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Setup priority for frr detour LSP."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsTunnelFrrEntry 2 }
|
|
|
|
rcIpMplsTunnelFrrHoldingPrio OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Holding priority for frr detour LSP."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsTunnelFrrEntry 3 }
|
|
|
|
rcIpMplsTunnelFrrHopLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of hops a frr detour LSP is allowed
|
|
to traverse."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsTunnelFrrEntry 4 }
|
|
|
|
rcIpMplsTunnelFrrBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Bandwidth estimate with which to set up the frr detour LSPs
|
|
in units of a million bits per second (Mbps)."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsTunnelFrrEntry 5 }
|
|
|
|
rcIpMplsTunnelFrrProtectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
oneToOneBackup(0),
|
|
facilityBackup(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Frr backup or resource protection type to be used."
|
|
|
|
DEFVAL { oneToOneBackup }
|
|
::= { rcIpMplsTunnelFrrEntry 6 }
|
|
|
|
rcIpMplsTunnelFrrExclAnyAffinity OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Exclude any link in detour LSP setup which is represented by
|
|
administratively defined attributes associated with the bit
|
|
pattern of this object. The value represents the format of
|
|
a hexadecimal 32-bit vector or mask."
|
|
::= { rcIpMplsTunnelFrrEntry 7 }
|
|
|
|
rcIpMplsTunnelFrrInclAnyAffinity OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Allow detour LSP setup on any link which is represented by
|
|
administratively defined attributes associated with the bit
|
|
pattern of this object. The value represents the format of a
|
|
|
|
hexadecimal 32-bit vector or mask. A value of zero allows a
|
|
detour LSP to be setup on any link per the constraint of thi
|
|
s
|
|
object."
|
|
::= { rcIpMplsTunnelFrrEntry 8 }
|
|
|
|
rcIpMplsTunnelFrrInclAllAffinity OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Only allow detour LSP setup on links which contain at a
|
|
minimum the administratively defined attributes represented
|
|
by this bit pattern. The value represents the format of a
|
|
hexadecimal 32-bit vector or mask. A value of zero allows a
|
|
detour LSP to be setup on any link per the constraint of thi
|
|
s
|
|
object."
|
|
::= { rcIpMplsTunnelFrrEntry 9 }
|
|
|
|
rcIpMplsTunnelFrrLegacyFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Flag to control the format of the frr object used. When
|
|
set to true, the legacy format is used which is a
|
|
class type of 7. When set to false the frr format used
|
|
is for class type of 1."
|
|
DEFVAL { true }
|
|
::= { rcIpMplsTunnelFrrEntry 10 }
|
|
|
|
rcIpMplsTunnelFrrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { rcIpMplsTunnelFrrEntry 11 }
|
|
|
|
-- End of rcIpMplsTunnelFrrTable
|
|
-- Begin of rcIpMplsTunnelHopToIpAddrMapTable
|
|
|
|
rcIpMplsTunnelHopToIpAddrMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsTunnelHopToIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rcIpMplsTunnelHopToIpAddrMapTable is used to maintain
|
|
mapping between Hop name and IP Address."
|
|
::= { rcIpMpls 18 }
|
|
|
|
rcIpMplsTunnelHopToIpAddrMapEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsTunnelHopToIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents a mapping between
|
|
Hop name and the IP Address."
|
|
INDEX { rcIpMplsTunnelHopToIpAddrMapHopName }
|
|
::= { rcIpMplsTunnelHopToIpAddrMapTable 1 }
|
|
|
|
RcIpMplsTunnelHopToIpAddrEntry ::= SEQUENCE {
|
|
rcIpMplsTunnelHopToIpAddrMapHopName DisplayString,
|
|
rcIpMplsTunnelHopToIpAddrMapIPAddr IpAddress,
|
|
rcIpMplsTunnelHopToIpAddrMapIPAddrPrefixLen INTEGER,
|
|
rcIpMplsTunnelHopToIpAddrMapRowStatus RowStatus
|
|
}
|
|
|
|
rcIpMplsTunnelHopToIpAddrMapHopName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Primary index into this table identifying a hop name."
|
|
::= { rcIpMplsTunnelHopToIpAddrMapEntry 1 }
|
|
|
|
rcIpMplsTunnelHopToIpAddrMapIPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table column, identifying an IP Address."
|
|
::= { rcIpMplsTunnelHopToIpAddrMapEntry 2 }
|
|
|
|
rcIpMplsTunnelHopToIpAddrMapIPAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table column identifying IP Address prefix length."
|
|
::= { rcIpMplsTunnelHopToIpAddrMapEntry 3 }
|
|
|
|
rcIpMplsTunnelHopToIpAddrMapRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status."
|
|
::= { rcIpMplsTunnelHopToIpAddrMapEntry 4 }
|
|
|
|
-- End of mplsTunnelHopToIpAddrMapTable
|
|
-- Begin of ircIpMplsLspTable
|
|
rcIpMplsLspTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsLspEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of originated, terminated and transit operational LSPs
|
|
with all cross connect information"
|
|
::= { rcIpMpls 19 }
|
|
|
|
rcIpMplsLspEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsLspEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpMpls Lsp in Table."
|
|
INDEX { rcIpMplsLspTunnelIndex,
|
|
rcIpMplsLspId,
|
|
rcIpMplsLspIngressLsrId,
|
|
rcIpMplsLspEgressLsrId }
|
|
::= { rcIpMplsLspTable 1 }
|
|
|
|
RcIpMplsLspEntry ::=
|
|
SEQUENCE {
|
|
rcIpMplsLspTunnelIndex INTEGER,
|
|
rcIpMplsLspId INTEGER,
|
|
rcIpMplsLspIngressLsrId MplsLsrId,
|
|
rcIpMplsLspEgressLsrId MplsLsrId,
|
|
rcIpMplsLspName DisplayString,
|
|
rcIpMplsLspType INTEGER,
|
|
rcIpMplsLspDetour TruthValue,
|
|
rcIpMplsLspIncomingInterface InterfaceIndex,
|
|
rcIpMplsLspIncomingLabel Integer32,
|
|
rcIpMplsLspOutgoingInterface InterfaceIndex,
|
|
rcIpMplsLspOutgoingLabel Integer32
|
|
}
|
|
|
|
rcIpMplsLspTunnelIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Tunnel Index"
|
|
::= { rcIpMplsLspEntry 1 }
|
|
|
|
rcIpMplsLspId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "LSP ID"
|
|
::= { rcIpMplsLspEntry 2 }
|
|
|
|
rcIpMplsLspIngressLsrId OBJECT-TYPE
|
|
SYNTAX MplsLsrId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Specifies the Ingress LSR Id"
|
|
::= { rcIpMplsLspEntry 3 }
|
|
|
|
rcIpMplsLspEgressLsrId OBJECT-TYPE
|
|
SYNTAX MplsLsrId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Specifies the Egress LSR Id"
|
|
::= { rcIpMplsLspEntry 4 }
|
|
|
|
rcIpMplsLspName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LSP Name"
|
|
::= { rcIpMplsLspEntry 5 }
|
|
|
|
rcIpMplsLspType OBJECT-TYPE
|
|
SYNTAX INTEGER { head(1), transit(2), tail(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value signifies the role that this tunnel
|
|
entry/instance represents. This value MUST be set
|
|
to head(1) at the originating point of the tunnel.
|
|
This value MUST be set to transit(2) at transit
|
|
points along the tunnel, if transit points are
|
|
supported. This value MUST be set to tail(3) at the
|
|
terminating point of the tunnel if tunnel tails are
|
|
supported."
|
|
::= { rcIpMplsLspEntry 6 }
|
|
|
|
rcIpMplsLspDetour OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The tunnel is a detour tunnel or not"
|
|
::= { rcIpMplsLspEntry 7 }
|
|
|
|
rcIpMplsLspIncomingInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LSR-assigned ifIndex"
|
|
::= { rcIpMplsLspEntry 8 }
|
|
|
|
rcIpMplsLspIncomingLabel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Incoming Label value"
|
|
::= { rcIpMplsLspEntry 9 }
|
|
|
|
rcIpMplsLspOutgoingInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LSR-assigned ifIndex"
|
|
::= { rcIpMplsLspEntry 10 }
|
|
|
|
rcIpMplsLspOutgoingLabel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Outgoing Label value"
|
|
::= { rcIpMplsLspEntry 11 }
|
|
|
|
-- End of rcIpMplsLspTable
|
|
|
|
-- Mpls Configuration Table
|
|
|
|
rcIpMplsIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMplsIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to maintain MPLS information
|
|
for a particular interface."
|
|
::= { rcIpMpls 20 }
|
|
|
|
rcIpMplsIfEntry OBJECT-TYPE
|
|
SYNTAX RcIpMplsIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing MPLS information. An entry is
|
|
automatically created in this table when MPLS
|
|
is enabled for an interface -or- when an ip address
|
|
is configured on an interface."
|
|
INDEX { rcIpMplsIfIfIndex }
|
|
::= { rcIpMplsIfTable 1 }
|
|
|
|
RcIpMplsIfEntry ::= SEQUENCE {
|
|
rcIpMplsIfIfIndex InterfaceIndexOrZero,
|
|
rcIpMplsIfLdpAdminState EnableValue,
|
|
rcIpMplsIfLdpSessionKeepAlive Unsigned32,
|
|
rcIpMplsIfLdpHelloHoldTime Unsigned32,
|
|
rcIpMplsIfLdpTransportAddr INTEGER,
|
|
rcIpMplsIfLdpImportPolicy INTEGER,
|
|
rcIpMplsIfRsvpAdminState EnableValue,
|
|
rcIpMplsIfRefreshReduction INTEGER,
|
|
rcIpMplsIfRefreshInterval Unsigned32,
|
|
rcIpMplsIfRefreshMultiplier Unsigned32,
|
|
rcIpMplsIfRsvpHelloInterval Unsigned32,
|
|
rcIpMplsIfMessageBundling INTEGER,
|
|
rcIpMplsIfMtu Unsigned32,
|
|
rcIpMplsIfRowStatus RowStatus,
|
|
rcIpMplsIfAuthentication EnableValue,
|
|
rcIpMplsIfAuthenticationKey DisplayString,
|
|
rcIpMplsIfAdminGroupList Unsigned32,
|
|
rcIpMplsIfBandwidth Unsigned32
|
|
}
|
|
|
|
rcIpMplsIfIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero (0..6142)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical interface
|
|
or a logical interface (VLAN)."
|
|
::= { rcIpMplsIfEntry 1 }
|
|
|
|
rcIpMplsIfLdpAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether LDP is enabled on the interface."
|
|
DEFVAL { disable }
|
|
::= { rcIpMplsIfEntry 2 }
|
|
|
|
rcIpMplsIfLdpSessionKeepAlive OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 15..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Configures the LDP Session keep alive on the interface.
|
|
The value 0 is used to indicate a global value.
|
|
If 0 the interface will use the LDP global value.
|
|
If greater than 0 this value will override the
|
|
LDP global value."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsIfEntry 3 }
|
|
|
|
rcIpMplsIfLdpHelloHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 5..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Configures the LDP hello hold time on the interface.
|
|
If 0 the interface will use the LDP global value.
|
|
If greater than 0 this value will override the
|
|
LDP global value."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsIfEntry 4 }
|
|
|
|
rcIpMplsIfLdpTransportAddr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
interface(1),
|
|
router-id(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Configures the transport address of the LDP lsp.
|
|
If not set then transport address will be the MPLS
|
|
router id."
|
|
DEFVAL { router-id }
|
|
::= { rcIpMplsIfEntry 5 }
|
|
|
|
rcIpMplsIfLdpImportPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(1),
|
|
host-only(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Configures the LDP import policy behavior.
|
|
If set to host-only then only host will import policies.
|
|
If set to all then all interfaces will import policies."
|
|
DEFVAL { all }
|
|
::= { rcIpMplsIfEntry 6 }
|
|
|
|
rcIpMplsIfRsvpAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether RSVP is enabled on the interface."
|
|
DEFVAL { disable }
|
|
::= { rcIpMplsIfEntry 7 }
|
|
|
|
rcIpMplsIfRefreshReduction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
global(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether RSVP refresh reduction is enabled or not.
|
|
If set to global, refresh reduction will take the global
|
|
RSVP refresh reduction value."
|
|
DEFVAL { global }
|
|
::= { rcIpMplsIfEntry 8 }
|
|
|
|
rcIpMplsIfRefreshInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Configures the RSVP refresh interval on the interface.
|
|
If set to zero, the refresh interval will default to
|
|
the global rsvp refresh interval."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsIfEntry 9 }
|
|
|
|
rcIpMplsIfRefreshMultiplier OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Configures the RSVP refresh multiplier for the interface.
|
|
If set to zero, the refresh interval will default to
|
|
to global rsvp refresh multiplier."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsIfEntry 10 }
|
|
|
|
rcIpMplsIfRsvpHelloInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Configures the RSVP hello interval on the interface.
|
|
If 0 the interface will use the RSVP global value.
|
|
If greater than 0 this value will override the
|
|
RSVP global value."
|
|
DEFVAL { 0 }
|
|
::= { rcIpMplsIfEntry 11 }
|
|
|
|
rcIpMplsIfMessageBundling OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
global(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether RSVP message bundling is enabled or not.
|
|
If set to global, message bundling will take the global
|
|
RSVP message bundling value."
|
|
DEFVAL { global }
|
|
::= { rcIpMplsIfEntry 12 }
|
|
|
|
rcIpMplsIfMtu OBJECT-TYPE
|
|
SYNTAX Unsigned32 (64..9600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Configures the mtu of the mpls interface.
|
|
The value cannot exceed that of the system mtu size."
|
|
DEFVAL { 1500 }
|
|
::= { rcIpMplsIfEntry 13 }
|
|
|
|
rcIpMplsIfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcIpMplsIfEntry 14 }
|
|
|
|
rcIpMplsIfAuthentication OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable RSVP MD5 authentication."
|
|
DEFVAL { disable }
|
|
::= { rcIpMplsIfEntry 15 }
|
|
|
|
rcIpMplsIfAuthenticationKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (8..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "RSVP MD5 authentication key."
|
|
::= { rcIpMplsIfEntry 16 }
|
|
|
|
rcIpMplsIfAdminGroupList OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Bitmap of admin group ids. The LSB is the
|
|
lowest numbered admin group."
|
|
::= { rcIpMplsIfEntry 17 }
|
|
|
|
rcIpMplsIfBandwidth OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Maximum reservable bandwidth in kbps."
|
|
::= { rcIpMplsIfEntry 18 }
|
|
|
|
--IP Static Route (new)
|
|
|
|
rcIpInterVrfStaticRoute OBJECT IDENTIFIER ::= { rcIp 103}
|
|
|
|
rcIpInterVrfStaticRouteTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "size of Ip Static Route Table."
|
|
::= { rcIpInterVrfStaticRoute 1 }
|
|
|
|
rcIpInterVrfStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpInterVrfStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to add static IP routes to
|
|
the device. Routes added into this table will
|
|
automatically show-up in the 'rcIpRouteTable'
|
|
when the device is actively using the route
|
|
to forward IP traffic."
|
|
::= { rcIpInterVrfStaticRoute 2 }
|
|
|
|
rcIpInterVrfStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX RcIpInterVrfStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A static route to a particular destination."
|
|
INDEX { rcIpInterVrfStaticRouteOwnerVrfId,
|
|
rcIpInterVrfStaticRouteDest,
|
|
rcIpInterVrfStaticRouteMask,
|
|
rcIpInterVrfStaticRouteNextHop }
|
|
::= { rcIpInterVrfStaticRouteTable 1 }
|
|
|
|
RcIpInterVrfStaticRouteEntry ::=
|
|
SEQUENCE {
|
|
rcIpInterVrfStaticRouteOwnerVrfId VrfIdentifier,
|
|
rcIpInterVrfStaticRouteDest IpAddress,
|
|
rcIpInterVrfStaticRouteMask IpAddress,
|
|
rcIpInterVrfStaticRouteNextHop IpAddress,
|
|
rcIpInterVrfStaticRouteMetric INTEGER,
|
|
rcIpInterVrfStaticRouteIfIndex InterfaceIndex,
|
|
rcIpInterVrfStaticRoutePreference INTEGER,
|
|
rcIpInterVrfStaticRouteEnable TruthValue,
|
|
rcIpInterVrfStaticRouteStatus INTEGER,
|
|
rcIpInterVrfStaticRouteRowStatus RowStatus,
|
|
rcIpInterVrfStaticRouteLocalNextHop TruthValue,
|
|
rcIpInterVrfStaticRouteNextHopVrfId VrfIdentifier
|
|
|
|
}
|
|
|
|
rcIpInterVrfStaticRouteOwnerVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Owner VRF id of the static route"
|
|
::= { rcIpInterVrfStaticRouteEntry 1 }
|
|
|
|
rcIpInterVrfStaticRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The destination IP address of this route. An
|
|
entry with a value of 0.0.0.0 is considered a
|
|
default route. Multiple routes to a single
|
|
destination can appear in the table, but access to
|
|
such multiple entries is dependent on the table-
|
|
access mechanisms defined by the network
|
|
management protocol in use."
|
|
::= { rcIpInterVrfStaticRouteEntry 2 }
|
|
|
|
rcIpInterVrfStaticRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Indicate the mask to be logical-ANDed with the
|
|
destination address before being compared to the
|
|
value in the rcIpRouteDest field. For those systems
|
|
that do not support arbitrary subnet masks, an
|
|
agent constructs the value of the rcIpRouteMask by
|
|
determining whether the value of the correspondent
|
|
rcIpRouteDest field belong to a class-A, B, or C
|
|
network, and then using one of:
|
|
|
|
mask network
|
|
255.0.0.0 class-A
|
|
255.255.0.0 class-B
|
|
255.255.255.0 class-C
|
|
|
|
If the value of the rcIpRouteDest is 0.0.0.0 (a
|
|
default route), then the mask value is also
|
|
0.0.0.0. It should be noted that all IP routing
|
|
subsystems implicitly use this mechanism."
|
|
::= { rcIpInterVrfStaticRouteEntry 3 }
|
|
|
|
rcIpInterVrfStaticRouteNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the next hop of this route.
|
|
(In the case of a route bound to an interface
|
|
which is realized via a broadcast media, the value
|
|
of this field is the agent's IP address on that
|
|
interface)."
|
|
::= { rcIpInterVrfStaticRouteEntry 4 }
|
|
|
|
|
|
rcIpInterVrfStaticRouteMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The primary routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
rcIpRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
DEFVAL { 1 }
|
|
::= { rcIpInterVrfStaticRouteEntry 5 }
|
|
|
|
rcIpInterVrfStaticRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
local interface through which the next hop of this
|
|
route should be reached. The interface identified
|
|
by a particular value of this index is the same
|
|
interface as identified by the same value of
|
|
ifIndex."
|
|
::= { rcIpInterVrfStaticRouteEntry 6 }
|
|
|
|
rcIpInterVrfStaticRoutePreference OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the route preference of this
|
|
entry. If there are more than one route that can
|
|
be used to forward IP traffic, the route that has
|
|
a highest preference will be used instead of a
|
|
lower preference one. The higher the number, the higher the preference."
|
|
::= { rcIpInterVrfStaticRouteEntry 7 }
|
|
|
|
rcIpInterVrfStaticRouteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable this entry."
|
|
DEFVAL { true }
|
|
::= { rcIpInterVrfStaticRouteEntry 8 }
|
|
|
|
rcIpInterVrfStaticRouteStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(0),
|
|
active(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current status of
|
|
this entry."
|
|
DEFVAL { active }
|
|
::= { rcIpInterVrfStaticRouteEntry 9 }
|
|
|
|
|
|
rcIpInterVrfStaticRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcIpInterVrfStaticRouteEntry 10 }
|
|
|
|
rcIpInterVrfStaticRouteLocalNextHop OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable this entry. True indicate that the
|
|
static route becomes active only if switch has a local route
|
|
to the network. False indicates that the static route becomes
|
|
active if switch has a local route or dynamic route."
|
|
DEFVAL { true }
|
|
::= { rcIpInterVrfStaticRouteEntry 11 }
|
|
|
|
rcIpInterVrfStaticRouteNextHopVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate nhVrfId in inter-VRF static-route configuration"
|
|
::= { rcIpInterVrfStaticRouteEntry 12 }
|
|
|
|
-- rcIpRouting/rcIpRoutingRedistributeRipToOspf Group
|
|
|
|
rcIpRoutingNumRoutesScalars OBJECT IDENTIFIER ::= { rcIpRouting 7 }
|
|
|
|
rcIpRoutingNumRoutesMaximumTotal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The maximum total number of routes allowed."
|
|
::= { rcIpRoutingNumRoutesScalars 1 }
|
|
|
|
rcIpRoutingNumRoutesMaximumLocal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The maximum number of local routes allowed."
|
|
::= { rcIpRoutingNumRoutesScalars 2 }
|
|
|
|
rcIpRoutingNumRoutesMaximumStatic OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The maximum number of static routes allowed."
|
|
::= { rcIpRoutingNumRoutesScalars 3 }
|
|
|
|
rcIpRoutingNumRoutesCurrentTotal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The current total number of routes."
|
|
::= { rcIpRoutingNumRoutesScalars 4 }
|
|
|
|
rcIpRoutingNumRoutesCurrentLocal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The current number of local routes."
|
|
::= { rcIpRoutingNumRoutesScalars 5 }
|
|
|
|
rcIpRoutingNumRoutesCurrentStatic OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The current number of static routes."
|
|
::= { rcIpRoutingNumRoutesScalars 6 }
|
|
|
|
-- rcIpSourceInterfaceTable for Circuitless IP
|
|
|
|
rcIpSourceInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpSourceInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table used to maintain source address information."
|
|
::= { rcIpRouting 8 }
|
|
|
|
rcIpSourceInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpSourceInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Source Interface Table."
|
|
INDEX { rcIpSourceInterfaceAppId }
|
|
::= { rcIpSourceInterfaceTable 1 }
|
|
|
|
RcIpSourceInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpSourceInterfaceAppId INTEGER,
|
|
rcIpSourceInterfaceType INTEGER,
|
|
rcIpSourceInterfaceId Integer32
|
|
}
|
|
|
|
rcIpSourceInterfaceAppId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
radius(1),
|
|
syslog(2),
|
|
tacacs(3),
|
|
snmp(4),
|
|
ssh(5),
|
|
telnet(6)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The application which can be set to use a specific interface
|
|
as source IP address in packets sent from the switch."
|
|
::= { rcIpSourceInterfaceEntry 1 }
|
|
|
|
rcIpSourceInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
loopback(2),
|
|
vlan(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of source address used."
|
|
DEFVAL { none }
|
|
::= { rcIpSourceInterfaceEntry 2 }
|
|
|
|
rcIpSourceInterfaceId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The ID of the interface used as source address.
|
|
An ID of 0 means no interface is currently set for this entry."
|
|
DEFVAL { 0 }
|
|
::= { rcIpSourceInterfaceEntry 3 }
|
|
|
|
-- IP BFD
|
|
|
|
rcIpBfd OBJECT IDENTIFIER ::= { rcIp 104 }
|
|
|
|
rcIpBfdTrapEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to indicate whether BFD traps should be sent or not"
|
|
DEFVAL { false }
|
|
::= { rcIpBfd 1 }
|
|
|
|
rcIpBfdHoldOffTimerInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the hold off timer interval, in
|
|
seconds. 0 means that hold off timer is disabled."
|
|
::= { rcIpBfd 2 }
|
|
|
|
-- BFD
|
|
|
|
rcBfdTmpMib OBJECT IDENTIFIER ::= { rcBfd 1 }
|
|
|
|
--
|
|
-- Top level components of this MIB module.
|
|
--
|
|
rcBfdTmpNotifications OBJECT IDENTIFIER ::= { rcBfdTmpMib 0 }
|
|
rcBfdTmpObjects OBJECT IDENTIFIER ::= { rcBfdTmpMib 1 }
|
|
|
|
--
|
|
-- Scalar objects
|
|
--
|
|
rcBfdTmpScalarObjects OBJECT IDENTIFIER ::= { rcBfdTmpObjects 1 }
|
|
|
|
-- Textual Conventions
|
|
|
|
RcBfdTmpSessIndexTC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index used to uniquely identify BFD sessions."
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
|
|
RcBfdTmpInterval ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BFD interval delay in microseconds."
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
|
|
RcBfdTmpDiag ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A common BFD diagnostic code."
|
|
SYNTAX INTEGER { noDiagnostic(1),
|
|
controlDetectionTimeExpired(2),
|
|
echoFunctionFailed(3),
|
|
neighborSignaledSessionDown(4),
|
|
forwardingPlaneReset(5),
|
|
pathDown(6),
|
|
concatenatedPathDown(7),
|
|
administrativelyDown(8),
|
|
reverseConcatenatedPathDown (9)
|
|
}
|
|
|
|
-- BFD General Variables
|
|
-- These parameters apply globally to the Router's
|
|
-- BFD Process.
|
|
|
|
rcBfdTmpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global administrative status of BFD in this router.
|
|
The value 'enabled' denotes that the BFD Process is
|
|
active on at least one interface; 'disabled' disables
|
|
it on all interfaces."
|
|
DEFVAL { enabled }
|
|
::= { rcBfdTmpScalarObjects 1 }
|
|
|
|
rcBfdTmpVersionNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current version number of the BFD protocol."
|
|
REFERENCE
|
|
" BFD Version 0 (draft-katz-ward-bfd-02.txt)"
|
|
DEFVAL { 0 }
|
|
::= { rcBfdTmpScalarObjects 3 }
|
|
|
|
-- BFD Session Table
|
|
-- The BFD Session Table specifies BFD session specific
|
|
-- information.
|
|
|
|
rcBfdTmpSessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBfdTmpSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BFD Session Table describes the BFD sessions."
|
|
REFERENCE
|
|
"BFD Version 0 (draft-katz-ward-bfd-02.txt)"
|
|
::= { rcBfdTmpObjects 2 }
|
|
|
|
rcBfdTmpSessEntry OBJECT-TYPE
|
|
SYNTAX RcBfdTmpSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BFD Session Entry describes BFD session."
|
|
INDEX { rcBfdTmpSessIndex }
|
|
::= { rcBfdTmpSessTable 1 }
|
|
|
|
RcBfdTmpSessEntry ::= SEQUENCE {
|
|
rcBfdTmpSessIndex RcBfdTmpSessIndexTC,
|
|
rcBfdTmpSessApplicationId Unsigned32,
|
|
rcBfdTmpSessDiscriminator Unsigned32,
|
|
rcBfdTmpSessRemoteDiscr Unsigned32,
|
|
rcBfdTmpSessUdpPort InetPortNumber,
|
|
rcBfdTmpSessState INTEGER,
|
|
rcBfdTmpSessRemoteHeardFlag TruthValue,
|
|
rcBfdTmpSessDiag Unsigned32,
|
|
rcBfdTmpSessOperMode INTEGER,
|
|
rcBfdTmpSessDemandModeDesiredFlag TruthValue,
|
|
rcBfdTmpSessEchoFuncModeDesiredFlag TruthValue,
|
|
rcBfdTmpSessControlPlanIndepFlag TruthValue,
|
|
rcBfdTmpSessAddrType InetAddressType,
|
|
rcBfdTmpSessAddr InetAddress,
|
|
rcBfdTmpSessDesiredMinTxInterval RcBfdTmpInterval,
|
|
rcBfdTmpSessReqMinRxInterval RcBfdTmpInterval,
|
|
rcBfdTmpSessReqMinEchoRxInterval RcBfdTmpInterval,
|
|
rcBfdTmpSessDetectMult Unsigned32,
|
|
rcBfdTmpSessStorType StorageType,
|
|
rcBfdTmpSessRowStatus RowStatus,
|
|
rcBfdTmpSessAuthPresFlag TruthValue,
|
|
rcBfdTmpSessAuthenticationType INTEGER,
|
|
rcBfdTmpSessDestAddr InetAddress,
|
|
rcBfdTmpSessOldState INTEGER
|
|
}
|
|
|
|
rcBfdTmpSessIndex OBJECT-TYPE
|
|
SYNTAX RcBfdTmpSessIndexTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an index used to represent a
|
|
unique BFD session on this device."
|
|
::= { rcBfdTmpSessEntry 1 }
|
|
|
|
rcBfdTmpSessApplicationId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an index used to indicate
|
|
a local application which owns or maintains this
|
|
BFD session. For instance, the MPLS VPN process may
|
|
maintain a subset of the total number of BFD
|
|
sessions. This application ID provides a convenient
|
|
way to segregate sessions by the applications which
|
|
maintain them."
|
|
::= { rcBfdTmpSessEntry 2 }
|
|
|
|
rcBfdTmpSessDiscriminator OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the local discriminator for this BFD
|
|
session, used to uniquely identify it."
|
|
::= { rcBfdTmpSessEntry 3 }
|
|
|
|
rcBfdTmpSessRemoteDiscr OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the session discriminator chosen
|
|
by the remote system for this BFD session."
|
|
::= { rcBfdTmpSessEntry 4 }
|
|
|
|
rcBfdTmpSessUdpPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP Port for BFD. The default value is the
|
|
well-known value for this port."
|
|
REFERENCE
|
|
"draft-katz-ward-bfd-02.txt and
|
|
draft-raggarwa-mpls-bfd-00.txt"
|
|
DEFVAL { 0 }
|
|
::= { rcBfdTmpSessEntry 5 }
|
|
|
|
rcBfdTmpSessState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
adminDown(1),
|
|
down(2),
|
|
init(3),
|
|
up(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The perceived state of the BFD session."
|
|
::= { rcBfdTmpSessEntry 6 }
|
|
|
|
rcBfdTmpSessRemoteHeardFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies status of BFD packet reception from
|
|
the remote system. Specifically, it is set to true(1) if
|
|
the local system is actively receiving BFD packets from the
|
|
remote system, and is set to false(0) if the local system
|
|
has not received BFD packets recently (within the detection
|
|
time) or if the local system is attempting to tear down
|
|
the BFD session."
|
|
::= { rcBfdTmpSessEntry 7 }
|
|
|
|
rcBfdTmpSessDiag OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A diagnostic code specifying the local system's reason
|
|
for the last transition of the session from up(1)
|
|
to some other state."
|
|
::= { rcBfdTmpSessEntry 8 }
|
|
|
|
rcBfdTmpSessOperMode OBJECT-TYPE
|
|
SYNTAX INTEGER { asyncModeWEchoFun(1),
|
|
asynchModeWOEchoFun(2),
|
|
demandModeWEchoFunction(3),
|
|
demandModeWOEchoFunction(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies current operating mode that BFD
|
|
session is operating in.
|
|
|
|
A value of AsyncModeWEchoFun(1) ...
|
|
A value of AsynchModeWOEchoFun(2) ...
|
|
A value of DemandModeWEchoFunction(3) ...
|
|
A value of DemandModeWOEchoFunction(4) ...
|
|
"
|
|
::= { rcBfdTmpSessEntry 9 }
|
|
|
|
rcBfdTmpSessDemandModeDesiredFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that the local system's
|
|
desire to use Demand mode. Specifically, it is set
|
|
to true(1) if the local system wishes to use
|
|
Demand mode or false(0) if not"
|
|
DEFVAL { false }
|
|
::= { rcBfdTmpSessEntry 10 }
|
|
|
|
rcBfdTmpSessEchoFuncModeDesiredFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that the local system's
|
|
desire to use Echo mode. Specifically, it is set
|
|
to true(1) if the local system wishes to use
|
|
Echo mode or false(0) if not"
|
|
DEFVAL { false }
|
|
::= { rcBfdTmpSessEntry 11 }
|
|
|
|
rcBfdTmpSessControlPlanIndepFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that the local system's
|
|
ability to continue to function through a disruption of
|
|
the control plane. Specifically, it is set
|
|
to true(1) if the local system BFD implementation is
|
|
independent of the control plane. Otherwise, the
|
|
value is set to false(0)"
|
|
DEFVAL { false }
|
|
::= { rcBfdTmpSessEntry 12 }
|
|
|
|
rcBfdTmpSessAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies IP address of the interface
|
|
associated with this BFD session.
|
|
|
|
Only values unknown(0), ipv4(1) or ipv6(2)
|
|
have to be supported.
|
|
|
|
A value of unknown(0) is allowed only when
|
|
the outgoing interface is of type point-to-point, or
|
|
when the BFD session is not associated with a specific
|
|
interface.
|
|
|
|
If any other unsupported values are attempted in a set
|
|
operation, the agent MUST return an inconsistentValue
|
|
error."
|
|
::= { rcBfdTmpSessEntry 13 }
|
|
|
|
rcBfdTmpSessAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies IP address of the interface
|
|
associated with this BFD session.
|
|
It can also be used to enabled BFD on a specific
|
|
interface. The value is set to zero when BFD session is not
|
|
associated with a specific interface."
|
|
::= { rcBfdTmpSessEntry 14 }
|
|
|
|
rcBfdTmpSessDesiredMinTxInterval OBJECT-TYPE
|
|
SYNTAX RcBfdTmpInterval
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum interval, in
|
|
microseconds, that the local system would like to use when
|
|
transmitting BFD Control packets."
|
|
::= { rcBfdTmpSessEntry 15 }
|
|
|
|
rcBfdTmpSessReqMinRxInterval OBJECT-TYPE
|
|
SYNTAX RcBfdTmpInterval
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum interval, in
|
|
microseconds, between received BFD Control packets the
|
|
local system is capable of supporting."
|
|
::= { rcBfdTmpSessEntry 16 }
|
|
|
|
rcBfdTmpSessReqMinEchoRxInterval OBJECT-TYPE
|
|
SYNTAX RcBfdTmpInterval
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum interval, in
|
|
microseconds, between received BFD Echo packets that this
|
|
system is capable of supporting."
|
|
::= { rcBfdTmpSessEntry 17 }
|
|
|
|
rcBfdTmpSessDetectMult OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Detect time multiplier."
|
|
::= { rcBfdTmpSessEntry 18 }
|
|
|
|
rcBfdTmpSessStorType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this
|
|
object. Conceptual rows having the value
|
|
'permanent' need not allow write-access to any
|
|
columnar objects in the row."
|
|
::= { rcBfdTmpSessEntry 19 }
|
|
|
|
rcBfdTmpSessRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. When a row in this
|
|
table has a row in the active(1) state, no
|
|
objects in this row can be modified except the
|
|
bfdSessRowStatus and bfdSessStorageType."
|
|
::= { rcBfdTmpSessEntry 20 }
|
|
|
|
rcBfdTmpSessAuthPresFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that the local system's
|
|
desire to use Authentication. Specifically, it is set
|
|
to true(1) if the local system wishes the session
|
|
to be authenticated or false(0) if not"
|
|
DEFVAL { false }
|
|
::= { rcBfdTmpSessEntry 21 }
|
|
|
|
rcBfdTmpSessAuthenticationType OBJECT-TYPE
|
|
SYNTAX INTEGER { simplePassword(1),
|
|
keyedMD5(2),
|
|
meticulousKeyedMD5(3),
|
|
keyedSHA1(4),
|
|
meticulousKeyedSHA1(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Authentication Type used for this BFD session. This
|
|
field is valid only when the Authentication Present bit is set"
|
|
::= { rcBfdTmpSessEntry 22 }
|
|
|
|
rcBfdTmpSessDestAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies destination IP address of the interface
|
|
associated with this BFD session."
|
|
::= { rcBfdTmpSessEntry 23 }
|
|
|
|
rcBfdTmpSessOldState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
adminDown(1),
|
|
down(2),
|
|
init(3),
|
|
up(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The old state of the BFD session."
|
|
::= { rcBfdTmpSessEntry 24 }
|
|
|
|
|
|
-- BFD Session Performance Table
|
|
|
|
rcBfdTmpSessPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBfdTmpSessPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies BFD Session performance counters."
|
|
::= { rcBfdTmpObjects 3 }
|
|
|
|
rcBfdTmpSessPerfEntry OBJECT-TYPE
|
|
SYNTAX RcBfdTmpSessPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by a BFD-enabled node for
|
|
every BFD Session. bfdCounterDiscontinuityTime is used to
|
|
indicate potential discontinuity for all counter objects
|
|
in this table."
|
|
AUGMENTS { rcBfdTmpSessEntry }
|
|
::= { rcBfdTmpSessPerfTable 1 }
|
|
|
|
RcBfdTmpSessPerfEntry ::= SEQUENCE {
|
|
rcBfdTmpSessPerfPktIn Counter32,
|
|
rcBfdTmpSessPerfPktOut Counter32,
|
|
rcBfdTmpSessUpTime TimeStamp,
|
|
rcBfdTmpSessPerfLastSessDownTime TimeStamp,
|
|
rcBfdTmpSessPerfLastCommLostDiag RcBfdTmpDiag,
|
|
rcBfdTmpSessPerfSessUpCount Counter32,
|
|
rcBfdTmpSessPerfDiscTime TimeStamp,
|
|
-- High Capacity Counters
|
|
rcBfdTmpSessPerfPktInHC Counter64,
|
|
rcBfdTmpSessPerfPktOutHC Counter64
|
|
}
|
|
|
|
-- Ed Note: should we add per-diag code counts here
|
|
|
|
rcBfdTmpSessPerfPktIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of BFD messages received for this BFD
|
|
session."
|
|
::= { rcBfdTmpSessPerfEntry 1 }
|
|
|
|
rcBfdTmpSessPerfPktOut OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of BFD messages sent for this BFD session."
|
|
::= { rcBfdTmpSessPerfEntry 2 }
|
|
|
|
rcBfdTmpSessUpTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime on the most recent occasion at which
|
|
the session came up. If no such up event exists this object
|
|
contains a zero value."
|
|
::= { rcBfdTmpSessPerfEntry 3 }
|
|
|
|
rcBfdTmpSessPerfLastSessDownTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime on the most recent occasion at which
|
|
the last time communication was lost with the neighbor. If
|
|
no such down event exist this object contains a zero value."
|
|
::= { rcBfdTmpSessPerfEntry 4 }
|
|
|
|
rcBfdTmpSessPerfLastCommLostDiag OBJECT-TYPE
|
|
SYNTAX RcBfdTmpDiag
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BFD diag code for the last time communication was lost
|
|
with the neighbor. If no such down event exists this object
|
|
contains a zero value."
|
|
::= { rcBfdTmpSessPerfEntry 5 }
|
|
|
|
rcBfdTmpSessPerfSessUpCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this session has gone into the Up
|
|
state since the router last rebooted."
|
|
::= { rcBfdTmpSessPerfEntry 6 }
|
|
|
|
rcBfdTmpSessPerfDiscTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime on the most recent occasion at
|
|
which any one or more of the session counters suffered
|
|
a discontinuity.
|
|
The relevant counters are the specific instances associated
|
|
with this BFD session of any Counter32 object contained in
|
|
the BfdSessPerfTable. If no such discontinuities have occurred
|
|
since the last re-initialization of the local management
|
|
subsystem, then this object contains a zero value."
|
|
::= { rcBfdTmpSessPerfEntry 7 }
|
|
|
|
rcBfdTmpSessPerfPktInHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the total number of BFD messages
|
|
received for this BFD session. It MUST be equal to the
|
|
least significant 32 bits of bfdSessPerfPktIn
|
|
if bfdSessPerfPktInHC is supported according to
|
|
the rules spelled out in RFC2863."
|
|
::= { rcBfdTmpSessPerfEntry 8 }
|
|
|
|
rcBfdTmpSessPerfPktOutHC OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the total number of
|
|
total number of BFD messages transmitted for this
|
|
BFD session. It MUST be equal to the
|
|
least significant 32 bits of bfdSessPerfPktIn
|
|
if bfdSessPerfPktOutHC is supported according to
|
|
the rules spelled out in RFC2863."
|
|
::= { rcBfdTmpSessPerfEntry 9 }
|
|
|
|
-- BFD Session Mapping Table
|
|
|
|
rcBfdTmpSessMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBfdTmpSessMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BFD Session Mapping Table maps the complex
|
|
indexing of the BFD sessions to the flat
|
|
BFDIndex used in the BfdSessionTable.
|
|
|
|
Implementors need to be aware that if the value of
|
|
the bfdSessAddr (an OID) has more
|
|
that 111 sub-identifiers, then OIDs of column
|
|
instances in this table will have more than 128
|
|
sub-identifiers and cannot be accessed using SNMPv1,
|
|
SNMPv2c, or SNMPv3."
|
|
REFERENCE
|
|
"BFD Version 0 (draft-katz-ward-bfd-02.txt)"
|
|
::= { rcBfdTmpObjects 4 }
|
|
|
|
rcBfdTmpSessMapEntry OBJECT-TYPE
|
|
SYNTAX RcBfdTmpSessMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BFD Session Entry describes BFD session
|
|
that is mapped to this index.
|
|
|
|
Implementors need to be aware that if the value of
|
|
the mplsInSegmentMapLabelPtrIndex (an OID) has more
|
|
that 111 sub-identifiers, then OIDs of column
|
|
instances in this table will have more than 128
|
|
sub-identifiers and cannot be accessed using SNMPv1,
|
|
SNMPv2c, or SNMPv3."
|
|
INDEX { rcBfdTmpSessApplicationId,
|
|
rcBfdTmpSessDiscriminator,
|
|
rcBfdTmpSessAddrType,
|
|
rcBfdTmpSessAddr
|
|
}
|
|
::= { rcBfdTmpSessMapTable 1 }
|
|
|
|
RcBfdTmpSessMapEntry ::= SEQUENCE {
|
|
rcBfdTmpSessMapBfdIndex RcBfdTmpSessIndexTC
|
|
}
|
|
|
|
rcBfdTmpSessMapBfdIndex OBJECT-TYPE
|
|
SYNTAX RcBfdTmpSessIndexTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the BfdIndex referred to by
|
|
the indexes of this row. In essence, a mapping is
|
|
provided between these indexes and the BfdSessTable."
|
|
::= { rcBfdTmpSessMapEntry 1 }
|
|
|
|
-- Notification Configuration
|
|
|
|
rcBfdTmpSessNotificationsEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this object is set to true(1), then it enables
|
|
the emission of bfdSessUp and bfdSessDown
|
|
notifications; otherwise these notifications are not
|
|
emitted."
|
|
REFERENCE
|
|
"See also RFC3413 for explanation that
|
|
notifications are under the ultimate control of the
|
|
MIB modules in this document."
|
|
DEFVAL { false }
|
|
::= { rcBfdTmpScalarObjects 4 }
|
|
|
|
rcBfdTmpSessUp NOTIFICATION-TYPE
|
|
OBJECTS { rcBfdTmpSessDiag, -- low range value
|
|
rcBfdTmpSessDiag -- high range value
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the
|
|
bfdSessState object for one or more contiguous
|
|
entries in bfdSessTable are about to enter the up(2)
|
|
state from some other state. The included values of
|
|
bfdSessDiag MUST both be set equal to this
|
|
new state (i.e: up(1)). The two instances of
|
|
bfdSessDiag in this notification indicate the range
|
|
of indexes that are affected. Note that all the indexes
|
|
of the two ends of the range can be derived from the
|
|
instance identifiers of these two objects. For the
|
|
cases where a contiguous range of sessions
|
|
have transitioned into the up(1) state at roughly
|
|
the same time, the device SHOULD issue a single
|
|
notification for each range of contiguous indexes in
|
|
an effort to minimize the emission of a large number
|
|
of notifications. If a notification has to be
|
|
issued for just a single bfdSessEntry, then
|
|
the instance identifier (and values) of the two
|
|
bfdSessDiag objects MUST be the identical."
|
|
::= { rcBfdTmpNotifications 1 }
|
|
|
|
rcBfdTmpSessDown NOTIFICATION-TYPE
|
|
OBJECTS { rcBfdTmpSessDiag, -- low range value
|
|
rcBfdTmpSessDiag -- high range value
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the
|
|
bfdSessState object for one or more contiguous
|
|
entries in bfdSessTable are about to enter the down(4)
|
|
or adminDown(5) states from some other state. The included
|
|
values of bfdSessDiag MUST both be set equal to this
|
|
new state (i.e: down(4) or adminDown(5)). The two instances
|
|
of bfdSessDiag in this notification indicate the range
|
|
of indexes that are affected. Note that all the indexes
|
|
of the two ends of the range can be derived from the
|
|
instance identifiers of these two objects. For
|
|
cases where a contiguous range of sessions
|
|
have transitioned into the down(4) or adminDown(5) states
|
|
at roughly the same time, the device SHOULD issue a single
|
|
notification for each range of contiguous indexes in
|
|
an effort to minimize the emission of a large number
|
|
of notifications. If a notification has to be
|
|
issued for just a single bfdSessEntry, then
|
|
the instance identifier (and values) of the two
|
|
bfdSessDiag objects MUST be the identical."
|
|
::= { rcBfdTmpNotifications 2 }
|
|
|
|
-- BFD EXT MIB
|
|
rcBfdExtMib OBJECT IDENTIFIER ::= { rcBfd 2 }
|
|
|
|
rcBfdExtObjects OBJECT IDENTIFIER ::= { rcBfdExtMib 1 }
|
|
|
|
rcBfdExtSessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBfdExtSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BFD Session Extension Table describes the BFD sessions."
|
|
::= { rcBfdExtObjects 1 }
|
|
|
|
rcBfdExtSessEntry OBJECT-TYPE
|
|
SYNTAX RcBfdExtSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BFD Session Extension Entry describes BFD session."
|
|
AUGMENTS { rcBfdTmpSessEntry }
|
|
::= { rcBfdExtSessTable 1 }
|
|
|
|
RcBfdExtSessEntry ::= SEQUENCE {
|
|
rcBfdExtSessPeerState INTEGER,
|
|
rcBfdExtSessPeerAddrType InetAddressType,
|
|
rcBfdExtSessPeerAddr InetAddress,
|
|
rcBfdExtSessApp SnmpAdminString,
|
|
rcBfdExtSessAppRun SnmpAdminString
|
|
}
|
|
|
|
rcBfdExtSessPeerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
adminDown(1),
|
|
down(2),
|
|
init(3),
|
|
up(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The perceived peer state of the BFD session."
|
|
::= { rcBfdExtSessEntry 1 }
|
|
|
|
rcBfdExtSessPeerAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inet Address Type of peer IP address
|
|
associated with this BFD session."
|
|
|
|
::= { rcBfdExtSessEntry 2 }
|
|
|
|
rcBfdExtSessPeerAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies peer IP address
|
|
associated with this BFD session."
|
|
::= { rcBfdExtSessEntry 3 }
|
|
|
|
rcBfdExtSessApp OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the applications
|
|
configured on this BFD session."
|
|
::= { rcBfdExtSessEntry 4 }
|
|
|
|
rcBfdExtSessAppRun OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the applications
|
|
running on this BFD session."
|
|
::= { rcBfdExtSessEntry 5 }
|
|
|
|
|
|
-- IP Static MRoute
|
|
rcIpStaticMRoute OBJECT IDENTIFIER ::= { rcIp 105 }
|
|
|
|
rcIpStaticMRouteMib OBJECT IDENTIFIER ::= { rcIpStaticMRoute 1 }
|
|
|
|
rcIpStaticMRouteNotifications OBJECT IDENTIFIER ::= { rcIpStaticMRouteMib 0 }
|
|
rcIpStaticMRouteObjects OBJECT IDENTIFIER ::= { rcIpStaticMRouteMib 1 }
|
|
|
|
--
|
|
-- Object groups within the IP Static MRoute MIB
|
|
--
|
|
|
|
rcIpStaticMRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpStaticMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used by multicast routing protocols, i.e
|
|
PIM-SM, PIM-SSM, MSDP and is not visible to any other L2/L3
|
|
Protocols. It provides the flexibility of separating the
|
|
paths for unicast and multicast streams. Any route addition
|
|
to this table will not affect the switching and/or routing of
|
|
IP unicast packets."
|
|
::= { rcIpStaticMRouteObjects 1 }
|
|
|
|
|
|
rcIpStaticMRouteEntry OBJECT-TYPE
|
|
SYNTAX RcIpStaticMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A static MRoute to a particular destination."
|
|
INDEX { rcIpStaticMRouteIpAddressType,
|
|
rcIpStaticMRouteIpAddress,
|
|
rcIpStaticMRouteMask,
|
|
rcIpStaticMRouteRpfAddressType,
|
|
rcIpStaticMRouteRpfAddress
|
|
}
|
|
::= { rcIpStaticMRouteTable 1 }
|
|
|
|
|
|
RcIpStaticMRouteEntry ::= SEQUENCE {
|
|
rcIpStaticMRouteIpAddressType InetAddressType,
|
|
rcIpStaticMRouteIpAddress InetAddress,
|
|
rcIpStaticMRouteMask InetAddressPrefixLength,
|
|
rcIpStaticMRouteRpfAddressType InetAddressType,
|
|
rcIpStaticMRouteRpfAddress InetAddress,
|
|
rcIpStaticMRoutePreference Unsigned32,
|
|
rcIpStaticMRouteEnable TruthValue,
|
|
rcIpStaticMRouteRowStatus RowStatus
|
|
}
|
|
|
|
rcIpStaticMRouteIpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address type of Static MRoute IP address."
|
|
::= { rcIpStaticMRouteEntry 1 }
|
|
|
|
rcIpStaticMRouteIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Static MRoute IP address denotes the destination
|
|
network for which the route is being added."
|
|
::= { rcIpStaticMRouteEntry 2 }
|
|
|
|
rcIpStaticMRouteMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Denotes the IP subnet mask of the Static MRoute."
|
|
::= { rcIpStaticMRouteEntry 3 }
|
|
|
|
rcIpStaticMRouteRpfAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address type of Static MRoute Rpf address."
|
|
::= { rcIpStaticMRouteEntry 4 }
|
|
|
|
rcIpStaticMRouteRpfAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RPF address is the same as the nexthop in unicast
|
|
Static IP route table. The RPF address denotes the
|
|
RPF neighbor towards RP/Source."
|
|
::= { rcIpStaticMRouteEntry 5 }
|
|
|
|
rcIpStaticMRoutePreference OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Static MRoute Preference is the administrative
|
|
distance for the given route. When unicast routing
|
|
table and the multicast-static IP route table
|
|
have different routes for the same destination
|
|
network, then this administrative distance is compared
|
|
with that of the protocol that contributed the route
|
|
in unicast routing table. By providing administrative
|
|
distance for every route, we are giving flexibility to
|
|
the administrator to choose different distances for
|
|
different networks."
|
|
::= { rcIpStaticMRouteEntry 6 }
|
|
|
|
rcIpStaticMRouteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This denotes the status of the route in this table.
|
|
It can either be enabled/disabled."
|
|
DEFVAL { true }
|
|
::= { rcIpStaticMRouteEntry 7 }
|
|
|
|
rcIpStaticMRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Creation and deletion of the row entry."
|
|
::= { rcIpStaticMRouteEntry 8 }
|
|
|
|
rcIpEcmp OBJECT IDENTIFIER ::= { rcIp 106 }
|
|
|
|
rcIpEcmpMib OBJECT IDENTIFIER ::= { rcIpEcmp 1 }
|
|
|
|
rcIpEcmpObjects OBJECT IDENTIFIER ::= { rcIpEcmpMib 1 }
|
|
|
|
rcIpEcmpRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpEcmpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is used to get the ECMP route
|
|
for a given pair of source IP and
|
|
destination IP addresses."
|
|
::= { rcIpEcmpObjects 1 }
|
|
|
|
rcIpEcmpRouteEntry OBJECT-TYPE
|
|
SYNTAX RcIpEcmpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIpEcmpRouteTable."
|
|
INDEX { rcIpEcmpRouteSrcIp,
|
|
rcIpEcmpRouteDstIp,
|
|
rcIpEcmpRouteDstMask }
|
|
::= { rcIpEcmpRouteTable 1 }
|
|
|
|
RcIpEcmpRouteEntry ::= SEQUENCE {
|
|
rcIpEcmpRouteSrcIp IpAddress,
|
|
rcIpEcmpRouteDstIp IpAddress,
|
|
rcIpEcmpRouteDstMask IpAddress,
|
|
rcIpEcmpRouteNextHopLegacy IpAddress,
|
|
rcIpEcmpRouteNextHopRMod IpAddress
|
|
}
|
|
|
|
rcIpEcmpRouteSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Source IP"
|
|
::= { rcIpEcmpRouteEntry 1 }
|
|
|
|
rcIpEcmpRouteDstIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP"
|
|
::= { rcIpEcmpRouteEntry 2 }
|
|
|
|
rcIpEcmpRouteDstMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP mask"
|
|
::= { rcIpEcmpRouteEntry 3 }
|
|
|
|
rcIpEcmpRouteNextHopLegacy OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next-hop address if the ingress port is on a legacy card."
|
|
::= { rcIpEcmpRouteEntry 4 }
|
|
|
|
rcIpEcmpRouteNextHopRMod OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next-hop address if the ingress port is on a R-Mod card."
|
|
::= { rcIpEcmpRouteEntry 5 }
|
|
|
|
|
|
-- IP MC Record Delete
|
|
|
|
rcIPClearIPMCRecordTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIPClearIPMCRecordEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table used to clear an IP MC Record."
|
|
::= { rcIp 108 }
|
|
|
|
rcIPClearIPMCRecordEntry OBJECT-TYPE
|
|
SYNTAX RcIPClearIPMCRecordEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Clear IP MC Record Table Entry"
|
|
INDEX { rcIPClearIPMCRecordGroup,
|
|
rcIPClearIPMCRecordVlanId }
|
|
::= { rcIPClearIPMCRecordTable 1 }
|
|
|
|
RcIPClearIPMCRecordEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIPClearIPMCRecordGroup IpAddress,
|
|
rcIPClearIPMCRecordVlanId INTEGER,
|
|
rcIPClearIPMCRecordSource IpAddress,
|
|
rcIPClearIPMCRecordLCForceDelete TruthValue
|
|
}
|
|
|
|
rcIPClearIPMCRecordGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP Multicast Group Address."
|
|
::= { rcIPClearIPMCRecordEntry 1 }
|
|
|
|
rcIPClearIPMCRecordVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id where the IP MC record
|
|
has to be cleared."
|
|
::= { rcIPClearIPMCRecordEntry 2 }
|
|
|
|
rcIPClearIPMCRecordSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Source IP Address."
|
|
::= { rcIPClearIPMCRecordEntry 3 }
|
|
|
|
rcIPClearIPMCRecordLCForceDelete OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "By default, when LCForceDelete (Line Card
|
|
Force Delete) is set to false, if the IP
|
|
MC record is not found on the CP, then no
|
|
message will be sent to the line-card. When
|
|
LCForceDelete is set to true, a message
|
|
will be sent to the line-card even when the
|
|
IP MC record is not found on the CP."
|
|
DEFVAL { false }
|
|
::= { rcIPClearIPMCRecordEntry 4 }
|
|
|
|
|
|
|
|
-- IP ARP Record Delete
|
|
|
|
rcIPClearArpRecordTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIPClearArpRecordEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table used to clear an IP ARP Record."
|
|
::= { rcIp 107 }
|
|
|
|
rcIPClearArpRecordEntry OBJECT-TYPE
|
|
SYNTAX RcIPClearArpRecordEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Clear ARP Record Table Entry"
|
|
INDEX { rcIPClearArpRecordIpAddr,
|
|
rcIPClearArpRecordVlanId }
|
|
::= { rcIPClearArpRecordTable 1 }
|
|
|
|
RcIPClearArpRecordEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIPClearArpRecordIpAddr IpAddress,
|
|
rcIPClearArpRecordVlanId INTEGER,
|
|
rcIPClearArpRecordLCForceDelete TruthValue
|
|
}
|
|
|
|
rcIPClearArpRecordIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Address that needs to be cleared."
|
|
::= { rcIPClearArpRecordEntry 1 }
|
|
|
|
rcIPClearArpRecordVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id where the ARP record has to be cleared."
|
|
::= { rcIPClearArpRecordEntry 2 }
|
|
|
|
rcIPClearArpRecordLCForceDelete OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "By default, when LCForceDelete (Line Card Force
|
|
Delete) is set to false, if the ARP record is not
|
|
found on the CP, then no message will be sent to
|
|
the line-card. When LCForceDelete is set to true,
|
|
a message will be sent to the line-card even when
|
|
the ARP record is not found on the CP."
|
|
DEFVAL { false }
|
|
::= { rcIPClearArpRecordEntry 3 }
|
|
|
|
|
|
-- IP Mcast Square Smlt
|
|
|
|
rcIpMulticastSquareSmlt OBJECT IDENTIFIER ::= { rcIp 109 }
|
|
|
|
rcIpMulticastSquareSmltEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable multicast Square Smlt."
|
|
DEFVAL { false }
|
|
::= { rcIpMulticastSquareSmlt 1 }
|
|
|
|
-- IP Isis
|
|
rcIpIsis OBJECT IDENTIFIER ::= { rcIp 110 }
|
|
|
|
rcIpIsisGenInFilter OBJECT IDENTIFIER ::= {rcIpIsis 1}
|
|
|
|
rcIpIsisInFilterNickNameTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Nick Name table size"
|
|
::= { rcIpIsisGenInFilter 1 }
|
|
|
|
rcIpIsisInFilterIsidTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Isid table size"
|
|
::= { rcIpIsisGenInFilter 2 }
|
|
|
|
rcIpIsisInFilterNickNameIsidTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Nick Name Isid table size"
|
|
::= { rcIpIsisGenInFilter 3 }
|
|
|
|
rcIpIsisInFilterIsidListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Isid List table size"
|
|
::= { rcIpIsisGenInFilter 4 }
|
|
|
|
rcIpIsisInFilterNickNameIsidListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Nick Name Isid List table size"
|
|
::= { rcIpIsisGenInFilter 5 }
|
|
|
|
rcIpIsisInFilterApply OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(1),
|
|
apply(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to Apply the Ip Isis Accept filters.
|
|
When the value is set to apply, all the elements in
|
|
the in the various Ip Isis In Filter Tables will be
|
|
applied as well as rcIpIsisInFilterDefault. This may
|
|
be a disruptive operation to traffic.
|
|
The get will always return noAction."
|
|
DEFVAL { noAction }
|
|
::= { rcIpIsisGenInFilter 6 }
|
|
|
|
rcIpIsisInFilter OBJECT IDENTIFIER ::= {rcIpIsis 2}
|
|
|
|
-- IP Isis In Filter Nick Name Table
|
|
rcIpIsisInFilterNickNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpIsisInFilterNickNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Isis In Filter Nick Name table"
|
|
::= { rcIpIsisInFilter 1}
|
|
|
|
rcIpIsisInFilterNickNameEntry OBJECT-TYPE
|
|
SYNTAX RcIpIsisInFilterNickNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Isis In Filter Nick Name Table."
|
|
INDEX { rcIpIsisInFilterNickNameAdvertisingRtr }
|
|
::= { rcIpIsisInFilterNickNameTable 1 }
|
|
|
|
RcIpIsisInFilterNickNameEntry ::=
|
|
SEQUENCE {
|
|
rcIpIsisInFilterNickNameAdvertisingRtr IpIsisPlsbNodeNickName,
|
|
rcIpIsisInFilterNickNameEnable EnableValue,
|
|
rcIpIsisInFilterNickNamePolicyName DisplayString,
|
|
rcIpIsisInFilterNickNameRowStatus RowStatus,
|
|
rcIpIsisInFilterNickNameBackBonePolicyName DisplayString
|
|
}
|
|
|
|
rcIpIsisInFilterNickNameAdvertisingRtr OBJECT-TYPE
|
|
SYNTAX IpIsisPlsbNodeNickName
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "NickName used to filter by"
|
|
::= { rcIpIsisInFilterNickNameEntry 1 }
|
|
|
|
rcIpIsisInFilterNickNameEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enables or disables the NickName entry. The value
|
|
must be enabled to filter."
|
|
DEFVAL { disable }
|
|
::= { rcIpIsisInFilterNickNameEntry 2 }
|
|
|
|
rcIpIsisInFilterNickNamePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route Map name used"
|
|
::= { rcIpIsisInFilterNickNameEntry 3 }
|
|
|
|
rcIpIsisInFilterNickNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Nick Name Table Row Status"
|
|
::= { rcIpIsisInFilterNickNameEntry 4 }
|
|
|
|
rcIpIsisInFilterNickNameBackBonePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Backbone Route Map name"
|
|
::= { rcIpIsisInFilterNickNameEntry 5 }
|
|
|
|
-- IP Isis In Filter ISID Table
|
|
rcIpIsisInFilterIsidTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpIsisInFilterIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Isis In Filter Isid Isid table"
|
|
::= { rcIpIsisInFilter 2 }
|
|
|
|
rcIpIsisInFilterIsidEntry OBJECT-TYPE
|
|
SYNTAX RcIpIsisInFilterIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Isis In Filter Table."
|
|
INDEX { rcIpIsisInFilterIsid }
|
|
::= { rcIpIsisInFilterIsidTable 1 }
|
|
|
|
RcIpIsisInFilterIsidEntry ::=
|
|
SEQUENCE {
|
|
rcIpIsisInFilterIsid Integer32,
|
|
rcIpIsisInFilterIsidEnable EnableValue,
|
|
rcIpIsisInFilterIsidPolicyName DisplayString,
|
|
rcIpIsisInFilterIsidRowStatus RowStatus,
|
|
rcIpIsisInFilterIsidBackbonePolicyName DisplayString
|
|
}
|
|
|
|
rcIpIsisInFilterIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Isid value used to filter by.
|
|
The value 0 is used for Global Router."
|
|
::= { rcIpIsisInFilterIsidEntry 1 }
|
|
|
|
rcIpIsisInFilterIsidEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enables or disables the Isid entry. The value
|
|
must be enabled to filter."
|
|
DEFVAL { disable }
|
|
::= { rcIpIsisInFilterIsidEntry 2 }
|
|
|
|
rcIpIsisInFilterIsidPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route Map name used"
|
|
::= { rcIpIsisInFilterIsidEntry 3 }
|
|
|
|
rcIpIsisInFilterIsidRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Isid Table Row Status"
|
|
::= { rcIpIsisInFilterIsidEntry 4 }
|
|
|
|
rcIpIsisInFilterIsidBackbonePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Backbone Route Map name"
|
|
::= { rcIpIsisInFilterIsidEntry 5 }
|
|
|
|
-- IP Isis In Filter NickName ISID Table
|
|
rcIpIsisInFilterNickNameIsidTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpIsisInFilterNickNameIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Isis In Filter Nick Name Isid table"
|
|
::= { rcIpIsisInFilter 3 }
|
|
|
|
rcIpIsisInFilterNickNameIsidEntry OBJECT-TYPE
|
|
SYNTAX RcIpIsisInFilterNickNameIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Isis In Filter Nick Name Isid Table."
|
|
INDEX { rcIpIsisInFilterNickNameIsidAdvertisingRtr,
|
|
rcIpIsisInFilterNickNameIsid }
|
|
::= { rcIpIsisInFilterNickNameIsidTable 1 }
|
|
|
|
RcIpIsisInFilterNickNameIsidEntry ::=
|
|
SEQUENCE {
|
|
rcIpIsisInFilterNickNameIsidAdvertisingRtr IpIsisPlsbNodeNickName,
|
|
rcIpIsisInFilterNickNameIsid Integer32,
|
|
rcIpIsisInFilterNickNameIsidEnable EnableValue,
|
|
rcIpIsisInFilterNickNameIsidPolicyName DisplayString,
|
|
rcIpIsisInFilterNickNameIsidRowStatus RowStatus,
|
|
rcIpIsisInFilterNickNameIsidBackBonePolicyName DisplayString
|
|
}
|
|
|
|
rcIpIsisInFilterNickNameIsidAdvertisingRtr OBJECT-TYPE
|
|
SYNTAX IpIsisPlsbNodeNickName
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "NickName used to filter by"
|
|
::= { rcIpIsisInFilterNickNameIsidEntry 1 }
|
|
|
|
rcIpIsisInFilterNickNameIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Isid used to filter by.
|
|
The value 0 is used for Global Router."
|
|
::= { rcIpIsisInFilterNickNameIsidEntry 2 }
|
|
|
|
rcIpIsisInFilterNickNameIsidEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { disable }
|
|
::= { rcIpIsisInFilterNickNameIsidEntry 3 }
|
|
|
|
rcIpIsisInFilterNickNameIsidPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route Map name used"
|
|
::= { rcIpIsisInFilterNickNameIsidEntry 4 }
|
|
|
|
rcIpIsisInFilterNickNameIsidRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Nick Name Isid Table Row Status"
|
|
::= { rcIpIsisInFilterNickNameIsidEntry 5 }
|
|
|
|
rcIpIsisInFilterNickNameIsidBackBonePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Backbone Route Map name"
|
|
::= { rcIpIsisInFilterNickNameIsidEntry 6 }
|
|
|
|
-- IP Isis ISID List Table
|
|
|
|
rcIpIsisIsidListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpIsisIsidListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Isis Isid List table"
|
|
::= { rcIpIsisInFilter 4 }
|
|
|
|
rcIpIsisIsidListEntry OBJECT-TYPE
|
|
SYNTAX RcIpIsisIsidListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Isis Isid List Table."
|
|
INDEX { rcIpIsisIsidListName,
|
|
rcIpIsisIsidListIsid }
|
|
::= { rcIpIsisIsidListTable 1 }
|
|
|
|
RcIpIsisIsidListEntry ::=
|
|
SEQUENCE {
|
|
rcIpIsisIsidListName DisplayString,
|
|
rcIpIsisIsidListIsid Integer32,
|
|
rcIpIsisIsidListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpIsisIsidListName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Name of Isid List"
|
|
::= { rcIpIsisIsidListEntry 1 }
|
|
|
|
rcIpIsisIsidListIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Is a member of the specified isid list.
|
|
The value is the i-sid integer value or
|
|
the value 0 is used for Global Router."
|
|
::= { rcIpIsisIsidListEntry 2 }
|
|
|
|
rcIpIsisIsidListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row Status"
|
|
::= { rcIpIsisIsidListEntry 3 }
|
|
|
|
-- IP Isis In Filter ISID List Table
|
|
rcIpIsisInFilterIsidListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpIsisInFilterIsidListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Isis In Filter Isid List table"
|
|
::= { rcIpIsisInFilter 5 }
|
|
|
|
rcIpIsisInFilterIsidListEntry OBJECT-TYPE
|
|
SYNTAX RcIpIsisInFilterIsidListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Isis In Filter Table."
|
|
INDEX { rcIpIsisInFilterIsidListName }
|
|
::= { rcIpIsisInFilterIsidListTable 1 }
|
|
|
|
RcIpIsisInFilterIsidListEntry ::=
|
|
SEQUENCE {
|
|
rcIpIsisInFilterIsidListName DisplayString,
|
|
rcIpIsisInFilterIsidListEnable EnableValue,
|
|
rcIpIsisInFilterIsidListPolicyName DisplayString,
|
|
rcIpIsisInFilterIsidListRowStatus RowStatus,
|
|
rcIpIsisInFilterIsidListBackBonePolicyName DisplayString
|
|
}
|
|
|
|
rcIpIsisInFilterIsidListName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Name of Isid List"
|
|
::= { rcIpIsisInFilterIsidListEntry 1 }
|
|
|
|
rcIpIsisInFilterIsidListEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enables or disables the Isid List entry. The value
|
|
must be enabled to filter."
|
|
DEFVAL { disable }
|
|
::= { rcIpIsisInFilterIsidListEntry 2 }
|
|
|
|
rcIpIsisInFilterIsidListPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route Map name"
|
|
::= { rcIpIsisInFilterIsidListEntry 3 }
|
|
|
|
rcIpIsisInFilterIsidListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Isid List Table Row Status"
|
|
::= { rcIpIsisInFilterIsidListEntry 4 }
|
|
|
|
rcIpIsisInFilterIsidListBackBonePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Backbone Route Map name"
|
|
::= { rcIpIsisInFilterIsidListEntry 5 }
|
|
|
|
-- IP Isis In Filter Nick Name ISID List Table
|
|
rcIpIsisInFilterNickNameIsidListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpIsisInFilterNickNameIsidListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Isis In Filter Nick Name Isid List table"
|
|
::= { rcIpIsisInFilter 6}
|
|
|
|
rcIpIsisInFilterNickNameIsidListEntry OBJECT-TYPE
|
|
SYNTAX RcIpIsisInFilterNickNameIsidListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip Isis In Filter Nick Name Isid ListTable"
|
|
INDEX { rcIpIsisInFilterNickNameIsidListAdvertisingRtr,
|
|
rcIpIsisInFilterNickNameIsidListName }
|
|
::= { rcIpIsisInFilterNickNameIsidListTable 1 }
|
|
|
|
RcIpIsisInFilterNickNameIsidListEntry ::=
|
|
SEQUENCE {
|
|
rcIpIsisInFilterNickNameIsidListAdvertisingRtr IpIsisPlsbNodeNickName,
|
|
rcIpIsisInFilterNickNameIsidListName DisplayString,
|
|
rcIpIsisInFilterNickNameIsidListEnable EnableValue,
|
|
rcIpIsisInFilterNickNameIsidListPolicyName DisplayString,
|
|
rcIpIsisInFilterNickNameIsidListRowStatus RowStatus,
|
|
rcIpIsisInFilterNickNameIsidListBackBonePolicyName DisplayString
|
|
}
|
|
|
|
rcIpIsisInFilterNickNameIsidListAdvertisingRtr OBJECT-TYPE
|
|
SYNTAX IpIsisPlsbNodeNickName
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "NickName used to filter by"
|
|
::= { rcIpIsisInFilterNickNameIsidListEntry 1 }
|
|
|
|
rcIpIsisInFilterNickNameIsidListName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Name of Isid List used to filter"
|
|
::= { rcIpIsisInFilterNickNameIsidListEntry 2 }
|
|
|
|
rcIpIsisInFilterNickNameIsidListEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enables or disables the NickName IsidList entry.
|
|
The value must be enabled to filter."
|
|
DEFVAL { disable }
|
|
::= { rcIpIsisInFilterNickNameIsidListEntry 3 }
|
|
|
|
rcIpIsisInFilterNickNameIsidListPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route Map name"
|
|
::= { rcIpIsisInFilterNickNameIsidListEntry 4 }
|
|
|
|
rcIpIsisInFilterNickNameIsidListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ip Isis In Filter Nick Name Isid List Table Row Status"
|
|
::= { rcIpIsisInFilterNickNameIsidListEntry 5 }
|
|
|
|
rcIpIsisInFilterNickNameIsidListBackBonePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Backbone Route Map name"
|
|
::= { rcIpIsisInFilterNickNameIsidListEntry 6 }
|
|
|
|
rcIpIsisInFilterDefault OBJECT IDENTIFIER ::= { rcIpIsisInFilter 7 }
|
|
|
|
rcIpIsisInFilterDefaultPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Route Map name for the default filter"
|
|
::= { rcIpIsisInFilterDefault 1 }
|
|
|
|
rcIpIsisInFilterDefaultBackbonePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Backbone Route Map name for the default filter"
|
|
::= { rcIpIsisInFilterDefault 2 }
|
|
|
|
rcIpIpmcPimStaleSessionDelete OBJECT IDENTIFIER ::= { rcIp 111 }
|
|
|
|
rcIpIpmcPimStaleSessionDeleteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable PIM ipmc stale session delete feature"
|
|
DEFVAL { false }
|
|
::= { rcIpIpmcPimStaleSessionDelete 1 }
|
|
|
|
-- ARP Group
|
|
|
|
rcArpExtLifeTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The lifetime in minutues of an ARP entry within the
|
|
system."
|
|
::= { rcArp 1 }
|
|
|
|
rcArpExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcArpExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ARP extension table. This table augments the
|
|
standard ipNetToMediaTable defined in RFC1213."
|
|
::= { rcArp 2 }
|
|
|
|
rcArpExtEntry OBJECT-TYPE
|
|
SYNTAX RcArpExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing Proprietary ARP information.
|
|
An entry is automatically created in this table
|
|
when an ip address is configured on an interface."
|
|
INDEX { rcArpExtEntIfIndex }
|
|
::= { rcArpExtTable 1 }
|
|
|
|
RcArpExtEntry ::=
|
|
SEQUENCE {
|
|
rcArpExtEntIfIndex InterfaceIndex,
|
|
rcArpExtEntDoProxy INTEGER,
|
|
rcArpExtEntDoResp INTEGER,
|
|
rcArpExtEntDoFlood INTEGER,
|
|
rcArpExtEntForcedRearp TruthValue
|
|
}
|
|
|
|
rcArpExtEntIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable.
|
|
The interface identified by a particular value
|
|
of this index is the same interface as
|
|
identified by the same value of ifIndex."
|
|
::= { rcArpExtEntry 1 }
|
|
|
|
rcArpExtEntDoProxy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable ARP proxy responses on the
|
|
specified interface."
|
|
DEFVAL { disable }
|
|
::= { rcArpExtEntry 2 }
|
|
|
|
rcArpExtEntDoResp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable the sending of ARP responses
|
|
on the specified interface."
|
|
DEFVAL { enable }
|
|
::= { rcArpExtEntry 3 }
|
|
|
|
rcArpExtEntDoFlood OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable flooding of ARP responses for
|
|
NLBS Virtual Mac on the specified interface."
|
|
DEFVAL { disable }
|
|
::= { rcArpExtEntry 4 }
|
|
|
|
rcArpExtEntForcedRearp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable the activity check on ARP entries
|
|
with respect to aging on the specified interface.
|
|
When enabled and the timer expires, the ARP entry is
|
|
removed from the active list and placed in the list
|
|
for re-arping, regardless of whether the ARP entry
|
|
was being active at the time or not."
|
|
DEFVAL { false }
|
|
::= { rcArpExtEntry 5 }
|
|
|
|
-- rcArpExtV2Table
|
|
|
|
rcArpExtV2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcArpExtV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "ARP extension table. This table augments the
|
|
standard ipNetToMediaTable defined in RFC1213."
|
|
::= { rcArp 3 }
|
|
|
|
rcArpExtV2Entry OBJECT-TYPE
|
|
SYNTAX RcArpExtV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing Proprietary ARP information.
|
|
An entry is automatically created in this table
|
|
when an ip address is configured on an interface."
|
|
INDEX { rcArpExtV2EntIfIndex, rcArpExtV2EntIpIfAddr }
|
|
::= { rcArpExtV2Table 1 }
|
|
|
|
RcArpExtV2Entry ::=
|
|
SEQUENCE {
|
|
rcArpExtV2EntIfIndex InterfaceIndex,
|
|
rcArpExtV2EntIpIfAddr IpAddress,
|
|
rcArpExtV2EntDoProxy INTEGER,
|
|
rcArpExtV2EntDoResp INTEGER
|
|
}
|
|
|
|
rcArpExtV2EntIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable.
|
|
The interface identified by a particular value
|
|
of this index is the same interface as
|
|
identified by the same value of ifIndex."
|
|
::= { rcArpExtV2Entry 1 }
|
|
|
|
rcArpExtV2EntIpIfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Ip Address"
|
|
::= { rcArpExtV2Entry 2 }
|
|
|
|
rcArpExtV2EntDoProxy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable ARP proxy responses on the
|
|
specified interface."
|
|
DEFVAL { disable }
|
|
::= { rcArpExtV2Entry 3 }
|
|
|
|
rcArpExtV2EntDoResp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable the sending of ARP responses
|
|
on the specified interface."
|
|
DEFVAL { enable }
|
|
::= { rcArpExtV2Entry 4 }
|
|
|
|
rcArpExtMulticastMacFlooding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Multicast Mac Flooding Mode"
|
|
DEFVAL { disable }
|
|
::= { rcArp 4 }
|
|
|
|
|
|
-- RIP Group
|
|
|
|
rcRipExtOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable the operation of RIP on all
|
|
Interfaces."
|
|
::= { rcRip 1 }
|
|
|
|
rcRipExtUpdateTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time between transmission of RIP updates
|
|
on all interfaces."
|
|
::= { rcRip 2 }
|
|
|
|
rcRipExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcRipExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RIP extension table. This table augments the
|
|
standard IfConfTable table in RFC1389."
|
|
::= { rcRip 3 }
|
|
|
|
rcRipExtEntry OBJECT-TYPE
|
|
SYNTAX RcRipExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing Proprietary RIP information.
|
|
An entry is automatically created in this table
|
|
when an ip address is configured on an interface."
|
|
INDEX { rcRipExtEntIfIndex }
|
|
::= { rcRipExtTable 1 }
|
|
|
|
RcRipExtEntry ::=
|
|
SEQUENCE {
|
|
rcRipExtEntIfIndex InterfaceIndex,
|
|
rcRipExtEntTalk INTEGER,
|
|
rcRipExtEntListen INTEGER,
|
|
rcRipExtEntPoison INTEGER
|
|
}
|
|
|
|
rcRipExtEntIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable.
|
|
The interface identified by a particular value
|
|
of this index is the same interface as
|
|
identified by the same value of ifIndex."
|
|
::= { rcRipExtEntry 1 }
|
|
|
|
rcRipExtEntTalk OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable RIP transmission on the
|
|
specified interface."
|
|
DEFVAL { enable }
|
|
::= { rcRipExtEntry 2 }
|
|
|
|
rcRipExtEntListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable RIP reception on the specified
|
|
interface."
|
|
DEFVAL { enable }
|
|
::= { rcRipExtEntry 3 }
|
|
|
|
rcRipExtEntPoison OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable operation of poison reverse
|
|
on the specified interface. If poison is
|
|
disabled, split-horizon operation is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcRipExtEntry 4 }
|
|
|
|
-- rcRipExtV2Table
|
|
|
|
rcRipExtV2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcRipExtV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "RIP extension table. This table augments the
|
|
standard IfConfTable table in RFC1389."
|
|
::= { rcRip 4 }
|
|
|
|
rcRipExtV2Entry OBJECT-TYPE
|
|
SYNTAX RcRipExtV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing Proprietary RIP information.
|
|
An entry is automatically created in this table
|
|
when an ip address is configured on an interface."
|
|
INDEX { rcRipExtV2EntIfIndex, rcRipExtV2EntIpIfAddr }
|
|
::= { rcRipExtV2Table 1 }
|
|
|
|
RcRipExtV2Entry ::=
|
|
SEQUENCE {
|
|
rcRipExtV2EntIfIndex InterfaceIndex,
|
|
rcRipExtV2EntIpIfAddr IpAddress,
|
|
rcRipExtV2EntTalk INTEGER,
|
|
rcRipExtV2EntListen INTEGER,
|
|
rcRipExtV2EntPoison INTEGER
|
|
}
|
|
|
|
rcRipExtV2EntIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable.
|
|
The interface identified by a particular value
|
|
of this index is the same interface as
|
|
identified by the same value of ifIndex."
|
|
::= { rcRipExtV2Entry 1 }
|
|
|
|
rcRipExtV2EntIpIfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Ip Address."
|
|
::= { rcRipExtV2Entry 2 }
|
|
|
|
rcRipExtV2EntTalk OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable RIP transmission on the
|
|
specified interface."
|
|
DEFVAL { enable }
|
|
::= { rcRipExtV2Entry 3 }
|
|
|
|
rcRipExtV2EntListen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable RIP reception on the specified
|
|
interface."
|
|
DEFVAL { enable }
|
|
::= { rcRipExtV2Entry 4 }
|
|
|
|
rcRipExtV2EntPoison OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable operation of poison reverse
|
|
on the specified interface. If poison is
|
|
disabled, split-horizon operation is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcRipExtV2Entry 5 }
|
|
-- Mroute Table
|
|
|
|
rcMRouteExt OBJECT IDENTIFIER ::= { rcIp 115 }
|
|
|
|
rcMRouteExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMRouteExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing multicast routing
|
|
information for IP datagrams sent by particular sources to
|
|
the IP multicast groups known to this router."
|
|
::= { rcMRouteExt 1 }
|
|
|
|
rcMRouteExtEntry OBJECT-TYPE
|
|
SYNTAX RcMRouteExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the multicast routing
|
|
information for IP datagrams from a particular source and
|
|
addressed to a particular IP multicast group address."
|
|
AUGMENTS {
|
|
ipMRouteEntry
|
|
}
|
|
::= { rcMRouteExtTable 1 }
|
|
|
|
RcMRouteExtEntry ::= SEQUENCE {
|
|
rcMRouteExtProtocol INTEGER
|
|
}
|
|
|
|
rcMRouteExtProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
local(2), -- e.g., manually configured
|
|
netmgmt(3), -- set via net.mgmt protocol
|
|
dvmrp(4),
|
|
mospf(5),
|
|
pimSparseDense(6), -- PIMv1, both DM and SM
|
|
cbt(7),
|
|
pimSparseMode(8), -- PIM-SMv2
|
|
pimDenseMode(9), -- PIM-DMv2
|
|
igmpOnly(10),
|
|
pimSsmMode(11),
|
|
spb(12),
|
|
spbpimgw(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this route was learned."
|
|
::= { rcMRouteExtEntry 1 }
|
|
|
|
--
|
|
-- The IP Multicast Routing Next Hop Table
|
|
--
|
|
|
|
rcMRouteExtNextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMRouteExtNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing information on the next
|
|
hops on outgoing interfaces for routing IP multicast
|
|
datagrams. Each entry is one of a list of next hops on
|
|
outgoing interfaces for particular sources sending to a
|
|
particular multicast group address."
|
|
::= { rcMRouteExt 2 }
|
|
|
|
rcMRouteExtNextHopEntry OBJECT-TYPE
|
|
SYNTAX RcMRouteExtNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the list of next hops on
|
|
outgoing interfaces to which IP multicast datagrams from
|
|
particular sources to a IP multicast group address are
|
|
routed."
|
|
|
|
AUGMENTS {
|
|
ipMRouteNextHopEntry
|
|
}
|
|
|
|
::= { rcMRouteExtNextHopTable 1 }
|
|
|
|
RcMRouteExtNextHopEntry ::= SEQUENCE {
|
|
rcMRouteExtNextHopProtocol INTEGER,
|
|
rcMRouteExtNextHopL2Isid Integer32
|
|
}
|
|
|
|
rcMRouteExtNextHopProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
local(2), -- e.g., manually configured
|
|
netmgmt(3), -- set via net.mgmt protocol
|
|
dvmrp(4),
|
|
mospf(5),
|
|
pimSparseDense(6), -- PIMv1, both DM and SM
|
|
cbt(7),
|
|
pimSparseMode(8), -- PIM-SMv2
|
|
pimDenseMode(9), -- PIM-DMv2
|
|
igmpOnly(10),
|
|
pimSsmMode(11),
|
|
spb(12),
|
|
spbpimgw(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this next-hop was learned."
|
|
::= { rcMRouteExtNextHopEntry 1 }
|
|
|
|
rcMRouteExtNextHopL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2 ISID of the cvlan."
|
|
::= { rcMRouteExtNextHopEntry 2 }
|
|
|
|
--
|
|
-- The Multicast Routing Interface Table
|
|
--
|
|
|
|
rcMRouteExtInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMRouteExtInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containg multicast routing
|
|
information specific to interfaces."
|
|
::= { rcMRouteExt 3 }
|
|
|
|
rcMRouteExtInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcMRouteExtInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the multicast routing
|
|
information for a particular interface."
|
|
AUGMENTS {
|
|
ipMRouteInterfaceEntry
|
|
}
|
|
|
|
::= { rcMRouteExtInterfaceTable 1 }
|
|
|
|
RcMRouteExtInterfaceEntry ::= SEQUENCE {
|
|
rcMRouteExtInterfaceProtocol INTEGER
|
|
}
|
|
|
|
rcMRouteExtInterfaceProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
local(2), -- e.g., static routing
|
|
netmgmt(3), -- set via net.mgmt protocol
|
|
dvmrp(4),
|
|
mospf(5),
|
|
pimSparseDense(6), -- PIMv1, both DM and SM
|
|
cbt(7),
|
|
pimSparseMode(8), -- PIM-SMv2
|
|
pimDenseMode(9), -- PIM-DMv2
|
|
igmpOnly(10),
|
|
pimSsmMode(11),
|
|
spb(12),
|
|
spbpimgw(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing protocol running on this interface."
|
|
::= { rcMRouteExtInterfaceEntry 1 }
|
|
|
|
rcMRouteExtNextHopPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMRouteExtNextHopPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing information on the next
|
|
hops on outgoing interfaces for routing IP multicast
|
|
datagrams. Each entry is one of a list of next hops on
|
|
outgoing interfaces for particular sources sending to a
|
|
particular multicast group address"
|
|
::= { rcMRouteExt 4 }
|
|
|
|
rcMRouteExtNextHopPortEntry OBJECT-TYPE
|
|
SYNTAX RcMRouteExtNextHopPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the list of next hops on
|
|
outgoing interfaces to which IP multicast datagrams from
|
|
particular sources to a IP multicast group address are
|
|
routed."
|
|
INDEX { rcMRouteExtNextHopPortGroup, rcMRouteExtNextHopPortSource,
|
|
rcMRouteExtNextHopPortSourceMask, rcMRouteExtNextHopPortIfIndex,
|
|
rcMRouteExtNextHopPortReceiverPort, rcMRouteExtNextHopPortAddress }
|
|
::= { rcMRouteExtNextHopPortTable 1 }
|
|
|
|
RcMRouteExtNextHopPortEntry ::= SEQUENCE {
|
|
rcMRouteExtNextHopPortGroup IpAddress,
|
|
rcMRouteExtNextHopPortSource IpAddress,
|
|
rcMRouteExtNextHopPortSourceMask IpAddress,
|
|
rcMRouteExtNextHopPortIfIndex InterfaceIndex,
|
|
rcMRouteExtNextHopPortReceiverPort InterfaceIndex,
|
|
rcMRouteExtNextHopPortAddress IpAddress,
|
|
rcMRouteExtNextHopPortState INTEGER,
|
|
rcMRouteExtNextHopPortUpTime TimeTicks,
|
|
rcMRouteExtNextHopPortExpiryTime TimeTicks,
|
|
rcMRouteExtNextHopPortClosestMemberHops Integer32,
|
|
rcMRouteExtNextHopPortProtocol INTEGER,
|
|
rcMRouteExtNextHopPortPkts Counter32
|
|
}
|
|
|
|
rcMRouteExtNextHopPortGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group for which this entry specifies a
|
|
next hop on an outgoing interface."
|
|
::= { rcMRouteExtNextHopPortEntry 1 }
|
|
|
|
rcMRouteExtNextHopPortSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network address which when combined with the
|
|
corresponding value of ipMRouteNextHopSourceMask identifies
|
|
the sources for which this entry specifies a next hop on an
|
|
outgoing interface."
|
|
::= { rcMRouteExtNextHopPortEntry 2 }
|
|
|
|
rcMRouteExtNextHopPortSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask which when combined with the corresponding
|
|
value of ipMRouteNextHopSource identifies the sources for
|
|
which this entry specifies a next hop on an outgoing
|
|
interface."
|
|
::= { rcMRouteExtNextHopPortEntry 3 }
|
|
|
|
rcMRouteExtNextHopPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface for the outgoing
|
|
interface for this next hop."
|
|
::= { rcMRouteExtNextHopPortEntry 4 }
|
|
|
|
rcMRouteExtNextHopPortReceiverPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number where the receiver exists for this next hop."
|
|
::= { rcMRouteExtNextHopPortEntry 5 }
|
|
|
|
rcMRouteExtNextHopPortAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the next hop specific to this entry. For
|
|
most interfaces, this is identical to ipMRouteNextHopGroup.
|
|
NBMA interfaces, however, may have multiple next hop
|
|
addresses out a single outgoing interface."
|
|
::= { rcMRouteExtNextHopPortEntry 6 }
|
|
|
|
rcMRouteExtNextHopPortState OBJECT-TYPE
|
|
SYNTAX INTEGER { pruned(1), forwarding(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether the outgoing interface and next
|
|
hop represented by this entry is currently being used to
|
|
forward IP datagrams. The value 'forwarding' indicates it
|
|
is currently being used; the value 'pruned' indicates it is
|
|
not."
|
|
::= { rcMRouteExtNextHopPortEntry 7 }
|
|
|
|
rcMRouteExtNextHopPortUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since the multicast routing information
|
|
represented by this entry was learned by the router."
|
|
::= { rcMRouteExtNextHopPortEntry 8 }
|
|
|
|
rcMRouteExtNextHopPortExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum amount of time remaining before this entry will
|
|
be aged out. The value 0 indicates that the entry is not
|
|
subject to aging."
|
|
::= { rcMRouteExtNextHopPortEntry 9 }
|
|
|
|
rcMRouteExtNextHopPortClosestMemberHops OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of hops between this router and any
|
|
member of this IP multicast group reached via this next hop
|
|
on this outgoing interface. Any IP multicast datagrams for
|
|
the group which have a TTL less than this number of hops
|
|
will not be forwarded to this next hop."
|
|
::= { rcMRouteExtNextHopPortEntry 10 }
|
|
|
|
rcMRouteExtNextHopPortProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
local(2), -- e.g., manually configured
|
|
netmgmt(3), -- set via net.mgmt protocol
|
|
dvmrp(4),
|
|
mospf(5),
|
|
pimSparseDense(6), -- PIMv1, both DM and SM
|
|
cbt(7),
|
|
pimSparseMode(8), -- PIM-SMv2
|
|
pimDenseMode(9), -- PIM-DMv2
|
|
igmpOnly(10),
|
|
pimSsmMode(11),
|
|
spb(12),
|
|
spbpimgw(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this next-hop was learned."
|
|
::= { rcMRouteExtNextHopPortEntry 11 }
|
|
|
|
rcMRouteExtNextHopPortPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets which have been forwarded using this
|
|
route."
|
|
::= { rcMRouteExtNextHopPortEntry 12 }
|
|
|
|
-- IPv6 RIPng MIBs
|
|
--
|
|
rcRipng OBJECT IDENTIFIER ::= { rcRip 5 }
|
|
|
|
rcRipngObjects OBJECT IDENTIFIER ::= { rcRipng 1 }
|
|
|
|
rcIpv6RipngGeneralGroup OBJECT IDENTIFIER ::= { rcRipngObjects 1 }
|
|
|
|
rcIpv6RipngAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable RIPng globally"
|
|
::= { rcIpv6RipngGeneralGroup 1 }
|
|
|
|
rcIpv6RipngUpdateTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..360)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time between transmission of RIPng updates."
|
|
DEFVAL { 30 }
|
|
::= { rcIpv6RipngGeneralGroup 2 }
|
|
|
|
rcIpv6RipngGlobalHoldDownTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..360)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set the system-wide RIPng hold down time
|
|
in seconds."
|
|
DEFVAL { 120 }
|
|
::= { rcIpv6RipngGeneralGroup 3 }
|
|
|
|
rcIpv6RipngGlobalTimeOutInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (15..259200)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ripng TimeOut Interval in seconds"
|
|
DEFVAL { 180 }
|
|
::= { rcIpv6RipngGeneralGroup 4}
|
|
|
|
rcIpv6RipngDefaultInfoMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ripng default-information metric"
|
|
DEFVAL { 1 }
|
|
::= { rcIpv6RipngGeneralGroup 5 }
|
|
|
|
rcIpv6RipngDefaultInfoState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Default-information enable/disable at global level"
|
|
::= { rcIpv6RipngGeneralGroup 6 }
|
|
|
|
rcIpv6RipngDefaultImportMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ripng default import metric"
|
|
DEFVAL { 1 }
|
|
::= { rcIpv6RipngGeneralGroup 7 }
|
|
|
|
rcIpv6RipngInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RipngInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 Ripng Interface table"
|
|
::= { rcRipngObjects 2 }
|
|
|
|
rcIpv6RipngInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RipngInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of IPv6 Ripng Interface Table."
|
|
INDEX { rcIpv6RipngInterfaceIfIndex }
|
|
::= { rcIpv6RipngInterfaceTable 1 }
|
|
|
|
RcIpv6RipngInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RipngInterfaceIfIndex InterfaceIndex,
|
|
rcIpv6RipngInterfaceRipAdminStatus EnableValue,
|
|
rcIpv6RipngInterfaceDefaultInfoState EnableValue,
|
|
rcIpv6RipngInterfaceCost Integer32,
|
|
rcIpv6RipngInterfacePoison EnableValue,
|
|
rcIpv6RipngInterfaceRipOperStatus EnableValue,
|
|
rcIpv6RipngInterfaceRowStatus RowStatus
|
|
}
|
|
|
|
rcIpv6RipngInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ripng Interface Index."
|
|
::= { rcIpv6RipngInterfaceEntry 1 }
|
|
|
|
rcIpv6RipngInterfaceRipAdminStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable RIPng on interface"
|
|
::= { rcIpv6RipngInterfaceEntry 2 }
|
|
|
|
rcIpv6RipngInterfaceDefaultInfoState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Origante default route under the particular interface"
|
|
::= { rcIpv6RipngInterfaceEntry 3 }
|
|
|
|
rcIpv6RipngInterfaceCost OBJECT-TYPE
|
|
SYNTAX Integer32(1..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the cost of RIPng metric"
|
|
::= { rcIpv6RipngInterfaceEntry 4 }
|
|
|
|
rcIpv6RipngInterfacePoison OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable poison reverse on Ripng interface "
|
|
::= { rcIpv6RipngInterfaceEntry 5 }
|
|
|
|
rcIpv6RipngInterfaceRipOperStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable RIPng Operational state on interface"
|
|
::= { rcIpv6RipngInterfaceEntry 6 }
|
|
|
|
rcIpv6RipngInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable controls the status of the en-
|
|
try."
|
|
::= { rcIpv6RipngInterfaceEntry 7 }
|
|
|
|
rcIpv6RipngIfStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RipngIfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of subnets which require separate
|
|
status monitoring in RIPng."
|
|
::= { rcRipngObjects 3 }
|
|
|
|
rcIpv6RipngIfStatsEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RipngIfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Single Routing Domain in a single Subnet."
|
|
INDEX { rcIpv6RipngIfStatsIfIndex }
|
|
::= { rcIpv6RipngIfStatsTable 1 }
|
|
|
|
RcIpv6RipngIfStatsEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RipngIfStatsIfIndex InterfaceIndex,
|
|
rcIpv6RipngIfStatsRcvBadPackets Counter32,
|
|
rcIpv6RipngIfStatsRcvBadRoutes Counter32,
|
|
rcIpv6RipngIfStatsSentUpdates Counter32,
|
|
rcIpv6RipngIfStatsRcvUpdates Counter32,
|
|
rcIpv6RipngIfStatsClearStats TruthValue
|
|
}
|
|
|
|
rcIpv6RipngIfStatsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the RIPng interface."
|
|
::= { rcIpv6RipngIfStatsEntry 1 }
|
|
|
|
|
|
rcIpv6RipngIfStatsRcvBadPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RIPng response packets received by
|
|
the RIPng process which were subsequently dis-
|
|
carded for any reason (e.g. a version 0 packet,
|
|
or an unknown command type)."
|
|
::= { rcIpv6RipngIfStatsEntry 2 }
|
|
|
|
|
|
rcIpv6RipngIfStatsRcvBadRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes, in valid RIPng packets,
|
|
which were ignored for any reason (e.g. unknown
|
|
address family, or invalid metric)."
|
|
::= { rcIpv6RipngIfStatsEntry 3 }
|
|
|
|
rcIpv6RipngIfStatsSentUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of triggered RIPng updates actually
|
|
sent on this interface. This explicitly does
|
|
NOT include full updates sent containing new
|
|
information."
|
|
::= { rcIpv6RipngIfStatsEntry 4 }
|
|
|
|
rcIpv6RipngIfStatsRcvUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of triggered RIPng updates actually
|
|
receive on this interface. This explicitly does
|
|
NOT include full updates received containing new
|
|
information."
|
|
::= { rcIpv6RipngIfStatsEntry 5 }
|
|
|
|
rcIpv6RipngIfStatsClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear stats for RIpng interface"
|
|
DEFVAL { false }
|
|
::= { rcIpv6RipngIfStatsEntry 6 }
|
|
|
|
-- Test Group
|
|
|
|
rcTestExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Test extension table. This table augments the
|
|
standard ifTestTable table in RFC1573."
|
|
::= { rcTest 1 }
|
|
|
|
rcTestEntry OBJECT-TYPE
|
|
SYNTAX RcTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Proprietary test variables."
|
|
INDEX { rcTestExtIfIndex }
|
|
::= { rcTestExtTable 1 }
|
|
|
|
RcTestEntry ::=
|
|
SEQUENCE {
|
|
rcTestExtIfIndex InterfaceIndex,
|
|
rcTestExtPassCount Integer32,
|
|
rcTestExtFailCount Integer32
|
|
}
|
|
|
|
rcTestExtIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable.
|
|
The interface identified by a particular value
|
|
of this index is the same interface as
|
|
identified by the same value of ifIndex."
|
|
::= { rcTestEntry 1 }
|
|
|
|
rcTestExtPassCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of iterations of the test case that
|
|
completed successfully."
|
|
::= { rcTestEntry 2}
|
|
|
|
rcTestExtFailCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of iterations of the test case that
|
|
failed."
|
|
::= { rcTestEntry 3}
|
|
|
|
|
|
rcTestTypes OBJECT IDENTIFIER ::= { rcTest 2}
|
|
rcTestTypesFabric OBJECT IDENTIFIER ::= { rcTestTypes 1 }
|
|
rcTestTypesArTable OBJECT IDENTIFIER ::= { rcTestTypes 2 }
|
|
rcTestTypesExtLoopBack OBJECT IDENTIFIER ::= { rcTestTypes 3 }
|
|
|
|
|
|
rcTestCodes OBJECT IDENTIFIER ::= { rcTest 3 }
|
|
rcTestCodesNoReceive OBJECT IDENTIFIER ::= { rcTestCodes 1 }
|
|
rcTestCodesBadSeq OBJECT IDENTIFIER ::= { rcTestCodes 2 }
|
|
rcTestCodesBadLen OBJECT IDENTIFIER ::= { rcTestCodes 3 }
|
|
rcTestCodesBadData OBJECT IDENTIFIER ::= { rcTestCodes 4 }
|
|
|
|
|
|
-- Statistics
|
|
|
|
rcStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store port statistics."
|
|
::= { rcStat 1 }
|
|
|
|
rcStatEntry OBJECT-TYPE
|
|
SYNTAX RcStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "interface counters"
|
|
INDEX { rcStatPortIndex }
|
|
::= { rcStatTable 1 }
|
|
|
|
RcStatEntry ::= SEQUENCE {
|
|
rcStatPortIndex InterfaceIndex,
|
|
rcStatFrameTooShorts Counter32,
|
|
rcStatBridgeInUnicastFrames Counter32,
|
|
rcStatBridgeInMulticastFrames Counter32,
|
|
rcStatBridgeInBroadcastFrames Counter32,
|
|
rcStatBridgeInDiscards Counter32,
|
|
rcStatBridgeOutUnicastFrames Counter32,
|
|
rcStatBridgeOutMulticastFrames Counter32,
|
|
rcStatBridgeOutBroadcastFrames Counter32,
|
|
rcStatRouteInUnicastFrames Counter32,
|
|
rcStatRouteInMulticastFrames Counter32,
|
|
rcStatRouteInDiscards Counter32,
|
|
rcStatRouteOutUnicastFrames Counter32,
|
|
rcStatRouteOutMulticastFrames Counter32,
|
|
rcStatStgForwardTransitions Counter32,
|
|
rcStatStgInConfigBpdus Counter32,
|
|
rcStatStgInTcnBpdus Counter32,
|
|
rcStatStgInBadBpdus Counter32,
|
|
rcStatStgOutConfigBpdus Counter32,
|
|
rcStatStgOutTcnBpdus Counter32,
|
|
rcStatBridgeOutFrames Counter32,
|
|
rcStatPbtUnknownDropCount Counter64,
|
|
rcStatCtrlPktRtLimitTotalCnt Counter64,
|
|
rcStatCtrlPktRtLimitDropCnt Counter64,
|
|
rcStatPolicerTotalBytes Counter64,
|
|
rcStatPolicerTotalPkts Counter64,
|
|
rcStatPolicerGreenBytes Counter64,
|
|
rcStatPolicerYellowBytes Counter64,
|
|
rcStatPolicerRedBytes Counter64,
|
|
rcStatRateLimitDropPktRate Counter64,
|
|
rcStatRateLimitDropByteRate Counter64,
|
|
rcStatRateLimitDropTotalBytes Counter64,
|
|
rcStatRateLimitDropTotalPkts Counter64
|
|
}
|
|
|
|
rcStatPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { rcStatEntry 1 }
|
|
|
|
rcStatFrameTooShorts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames that are too short
|
|
that were encountered on this interface."
|
|
::= { rcStatEntry 2 }
|
|
|
|
rcStatBridgeInUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming unicast frames that
|
|
were bridged."
|
|
::= { rcStatEntry 3 }
|
|
|
|
rcStatBridgeInMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming multicast frames that
|
|
were bridged."
|
|
::= { rcStatEntry 4 }
|
|
|
|
rcStatBridgeInBroadcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming broadcast frames that
|
|
were bridged."
|
|
::= { rcStatEntry 5 }
|
|
|
|
rcStatBridgeInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames that were discarded by
|
|
the bridging entity."
|
|
::= { rcStatEntry 6 }
|
|
|
|
rcStatBridgeOutUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing unicast frames that
|
|
were bridged."
|
|
::= { rcStatEntry 7 }
|
|
|
|
rcStatBridgeOutMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing multicast frames that
|
|
were bridged."
|
|
::= { rcStatEntry 8 }
|
|
|
|
rcStatBridgeOutBroadcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing broadcast frames that
|
|
were bridged."
|
|
::= { rcStatEntry 9 }
|
|
|
|
rcStatRouteInUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming unicast frames that
|
|
were routed."
|
|
::= { rcStatEntry 10 }
|
|
|
|
rcStatRouteInMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming multicast frames that
|
|
were routed."
|
|
::= { rcStatEntry 11 }
|
|
|
|
rcStatRouteInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames that were discarded by
|
|
the routing entity."
|
|
::= { rcStatEntry 12 }
|
|
|
|
rcStatRouteOutUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing unicast frames that
|
|
were routed."
|
|
::= { rcStatEntry 13 }
|
|
|
|
rcStatRouteOutMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing multicast frames that
|
|
were routed."
|
|
::= { rcStatEntry 14 }
|
|
|
|
rcStatStgForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { rcStatEntry 15 }
|
|
|
|
rcStatStgInConfigBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcStatEntry 16 }
|
|
|
|
rcStatStgInTcnBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcStatEntry 17 }
|
|
|
|
rcStatStgInBadBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcStatEntry 18 }
|
|
|
|
rcStatStgOutConfigBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcStatEntry 19 }
|
|
|
|
rcStatStgOutTcnBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcStatEntry 20 }
|
|
|
|
rcStatBridgeOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used by the Accelar 8000 product family to account
|
|
for all transmitted bridge unicast, broadcast, and
|
|
multicast packets. The individual counters are not
|
|
supported."
|
|
::= { rcStatEntry 21 }
|
|
|
|
rcStatPbtUnknownDropCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Count of PBT packets dropped due to unknown
|
|
destination MAC"
|
|
::= { rcStatEntry 22 }
|
|
|
|
rcStatCtrlPktRtLimitTotalCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total count of control packets that is passed for rate limiting"
|
|
::= { rcStatEntry 23 }
|
|
|
|
rcStatCtrlPktRtLimitDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Count of control packets dropped after rate limiting"
|
|
::= { rcStatEntry 24 }
|
|
|
|
rcStatPolicerTotalBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bytes received on the
|
|
interface."
|
|
::= { rcStatEntry 25 }
|
|
|
|
rcStatPolicerTotalPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets received on the
|
|
interface."
|
|
::= { rcStatEntry 26 }
|
|
|
|
rcStatPolicerGreenBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bytes received on the
|
|
interface that were below the committed rate."
|
|
::= { rcStatEntry 27 }
|
|
|
|
rcStatPolicerYellowBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bytes received on the
|
|
interface that were above the committed rate
|
|
but below the peak rate."
|
|
::= { rcStatEntry 28 }
|
|
|
|
rcStatPolicerRedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bytes received on the
|
|
interface that were above the peak rate."
|
|
::= { rcStatEntry 29 }
|
|
|
|
rcStatRateLimitDropPktRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets dropped per second on the
|
|
interface."
|
|
::= { rcStatEntry 30 }
|
|
|
|
rcStatRateLimitDropByteRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bytes dropped per second on the
|
|
interface."
|
|
::= { rcStatEntry 31 }
|
|
|
|
rcStatRateLimitDropTotalBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bytes dropped on the
|
|
interface."
|
|
::= { rcStatEntry 32 }
|
|
|
|
rcStatRateLimitDropTotalPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets dropped on the
|
|
interface."
|
|
::= { rcStatEntry 33 }
|
|
|
|
|
|
-- rcStatGigTable
|
|
|
|
rcStatGigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatGigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store Gigport error statistics."
|
|
::= { rcStat 2 }
|
|
|
|
rcStatGigEntry OBJECT-TYPE
|
|
SYNTAX RcStatGigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Gigabit interface error counters"
|
|
INDEX { rcStatGigPortIndex }
|
|
::= { rcStatGigTable 1 }
|
|
|
|
RcStatGigEntry ::= SEQUENCE {
|
|
rcStatGigPortIndex InterfaceIndex,
|
|
rcStatGigLinkFailures Counter32,
|
|
rcStatGigPacketErrors Counter32,
|
|
rcStatGigCarrierErrors Counter32,
|
|
rcStatGigLinkInactiveErrors Counter32,
|
|
rcStatGigInFlowCtrlPkts Counter32,
|
|
rcStatGigOutFlowCtrlPkts Counter32,
|
|
rcStatGigFramesBad Counter64,
|
|
rcStatGigFragmentErrors Counter64,
|
|
rcStatGigLongJabberErrors Counter64,
|
|
rcStatGigDefaultDrops Counter64,
|
|
rcStatGigIllegalLenError Counter64,
|
|
rcStatGigMismatchError Counter64,
|
|
rcStatGigOutOfRangeError Counter64,
|
|
rcStatGigOversize Counter64,
|
|
rcStatGigDataErrors Counter64,
|
|
rcStatGigJabberErrors Counter64,
|
|
rcStatGigHCInPfcPkts Counter64,
|
|
rcStatGigHCOutPfcPkts Counter64,
|
|
rcStatGigHCInFlowCtrlPkts Counter64,
|
|
rcStatGigHCOutFlowCtrlPkts Counter64
|
|
}
|
|
|
|
rcStatGigPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { rcStatGigEntry 1 }
|
|
|
|
rcStatGigLinkFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of link failures encountered on
|
|
this interface."
|
|
::= { rcStatGigEntry 2 }
|
|
|
|
rcStatGigPacketErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packet errors encountered on
|
|
this interface."
|
|
::= { rcStatGigEntry 3 }
|
|
|
|
rcStatGigCarrierErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of carrier errors encountered on
|
|
this interface."
|
|
::= { rcStatGigEntry 4 }
|
|
|
|
rcStatGigLinkInactiveErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of link inactive errors encountered
|
|
on this interface."
|
|
::= { rcStatGigEntry 5 }
|
|
|
|
rcStatGigInFlowCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The total number of flow control packets received
|
|
by this interface."
|
|
::= { rcStatGigEntry 6 }
|
|
|
|
rcStatGigOutFlowCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The total number of flow control packets transmitted
|
|
by this interface."
|
|
::= { rcStatGigEntry 7 }
|
|
|
|
rcStatGigHCInPfcPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of Priority Flow Control (PFC)
|
|
packets received by this interface."
|
|
::= { rcStatGigEntry 8 }
|
|
|
|
rcStatGigHCOutPfcPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of Priority Flow Control (PFC)
|
|
packets transmitted by this interface."
|
|
::= { rcStatGigEntry 9 }
|
|
|
|
rcStatGigHCInFlowCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of flow control packets received
|
|
by this interface."
|
|
::= { rcStatGigEntry 10 }
|
|
|
|
rcStatGigHCOutFlowCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of flow control packets transmitted
|
|
by this interface."
|
|
::= { rcStatGigEntry 11 }
|
|
|
|
rcStatGigFramesBad OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bad frames"
|
|
::= { rcStatGigEntry 12 }
|
|
|
|
rcStatGigFragmentErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of fragment errors"
|
|
::= { rcStatGigEntry 13 }
|
|
|
|
rcStatGigLongJabberErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of long jabber errors"
|
|
::= { rcStatGigEntry 14 }
|
|
|
|
rcStatGigDefaultDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of default drops"
|
|
::= { rcStatGigEntry 15 }
|
|
|
|
rcStatGigIllegalLenError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of illegal length error"
|
|
::= { rcStatGigEntry 16 }
|
|
|
|
rcStatGigMismatchError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of mismatch error"
|
|
::= { rcStatGigEntry 17 }
|
|
|
|
rcStatGigOutOfRangeError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of out of range error"
|
|
::= { rcStatGigEntry 18 }
|
|
|
|
rcStatGigOversize OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of oversize "
|
|
::= { rcStatGigEntry 19 }
|
|
|
|
rcStatGigDataErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of data errors"
|
|
::= { rcStatGigEntry 20 }
|
|
|
|
rcStatGigJabberErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of jabbber errors"
|
|
::= { rcStatGigEntry 21 }
|
|
|
|
|
|
rcStatOspf OBJECT IDENTIFIER ::= { rcStat 3}
|
|
|
|
rcStatOspfBuffersAllocated OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of buffers
|
|
allocated for OSPF."
|
|
::= { rcStatOspf 1 }
|
|
|
|
rcStatOspfBuffersFreed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of buffers
|
|
that are freed by the OSPF."
|
|
::= { rcStatOspf 2 }
|
|
|
|
rcStatOspfBufferAllocFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of times
|
|
that OSPF has failed to allocate buffers."
|
|
::= { rcStatOspf 3 }
|
|
|
|
rcStatOspfBufferFreeFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of times
|
|
that OSPF has failed to free buffers."
|
|
::= { rcStatOspf 4 }
|
|
|
|
rcStatOspfTxPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
transmitted by OSPF."
|
|
::= { rcStatOspf 5 }
|
|
|
|
rcStatOspfRxPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
received by OSPF."
|
|
::= { rcStatOspf 6 }
|
|
|
|
rcStatOspfTxDropPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
dropped before transmitted by OSPF."
|
|
::= { rcStatOspf 7 }
|
|
|
|
rcStatOspfRxDropPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
dropped before received by OSPF."
|
|
::= { rcStatOspf 8 }
|
|
|
|
rcStatOspfRxBadPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
received by OSPF that are bad."
|
|
::= { rcStatOspf 9 }
|
|
|
|
rcStatOspfSpfRuns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the total number of SPF
|
|
calculatations performed by OSPF, which
|
|
also includes the number of partial route
|
|
table calculation for Incremental Updates."
|
|
::= { rcStatOspf 10 }
|
|
|
|
rcStatOspfLastSpfRun OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the time(SysUpTime) since
|
|
the last spf calculated by OSPF."
|
|
::= { rcStatOspf 11 }
|
|
|
|
rcStatOspfLsdbTblSize OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in
|
|
the linkstate database table."
|
|
::= { rcStatOspf 12 }
|
|
|
|
rcStatOspfRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of OSPF routes
|
|
added to RTM."
|
|
::= { rcStatOspf 13 }
|
|
|
|
rcStatOspfAdjacencies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of adjacencies
|
|
existing."
|
|
::= { rcStatOspf 14 }
|
|
|
|
rcStatOspfAreas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of areas configured"
|
|
::= { rcStatOspf 15 }
|
|
|
|
rcStatOspfNbrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of ospf neighbors"
|
|
::= { rcStatOspf 16 }
|
|
|
|
rcStatOspfBadLsReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of bad ls requests."
|
|
::= { rcStatOspf 17 }
|
|
|
|
rcStatOspfSeqMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of sequence
|
|
mismatched packets."
|
|
::= { rcStatOspf 18 }
|
|
|
|
rcStatOspfNumAllocDDP OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of DD packet buffers
|
|
allocated for OSPF."
|
|
::= { rcStatOspf 19 }
|
|
|
|
rcStatOspfNumFreeDDP OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of DD packet buffers
|
|
that are freed by the OSPF."
|
|
::= { rcStatOspf 20 }
|
|
|
|
rcStatOspfReset OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "reset Ospf global stats"
|
|
DEFVAL { false }
|
|
::= { rcStatOspf 21 }
|
|
|
|
rcStatIgmp OBJECT IDENTIFIER ::= { rcStat 4}
|
|
|
|
rcStatIgmpInMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Igmp packets
|
|
received by the device."
|
|
::= { rcStatIgmp 1 }
|
|
|
|
rcStatIgmpInErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Igmp packets
|
|
received that are with checksum errors."
|
|
::= { rcStatIgmp 2 }
|
|
|
|
rcStatIgmpInQueries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Igmp queries
|
|
received by the device."
|
|
::= { rcStatIgmp 3 }
|
|
|
|
rcStatIgmpInReports OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Igmp reports
|
|
received by the device."
|
|
::= { rcStatIgmp 4 }
|
|
|
|
|
|
rcStatIgmpInLeaves OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Igmp Leaves
|
|
received by the device."
|
|
::= { rcStatIgmp 5 }
|
|
|
|
rcStatIgmpInvalid OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Igmp packets
|
|
received by the device that contained invalid
|
|
type."
|
|
::= { rcStatIgmp 6 }
|
|
|
|
rcStatIgmpOutMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Igmp queries
|
|
sent by the device."
|
|
::= { rcStatIgmp 7 }
|
|
|
|
rcStatOspfIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store OSPF interface
|
|
statistics."
|
|
::= { rcStat 5 }
|
|
|
|
rcStatOspfIfEntry OBJECT-TYPE
|
|
SYNTAX RcStatOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ospf interface statistics"
|
|
INDEX { rcStatOspfIfIndex }
|
|
::= { rcStatOspfIfTable 1 }
|
|
|
|
RcStatOspfIfEntry ::= SEQUENCE {
|
|
rcStatOspfIfIndex InterfaceIndexOrZero,
|
|
rcStatOspfIfRxHellos Counter32,
|
|
rcStatOspfIfRxDBDescrs Counter32,
|
|
rcStatOspfIfRxLSUpdates Counter32,
|
|
rcStatOspfIfRxLSReqs Counter32,
|
|
rcStatOspfIfRxLSAcks Counter32,
|
|
rcStatOspfIfTxHellos Counter32,
|
|
rcStatOspfIfTxDBDescrs Counter32,
|
|
rcStatOspfIfTxLSUpdates Counter32,
|
|
rcStatOspfIfTxLSReqs Counter32,
|
|
rcStatOspfIfTxLSAcks Counter32,
|
|
rcStatOspfIfVersionMismatches Counter32,
|
|
rcStatOspfIfAreaMismatches Counter32,
|
|
rcStatOspfIfAuthTypeMismatches Counter32,
|
|
rcStatOspfIfAuthFailures Counter32,
|
|
rcStatOspfIfNetMaskMismatches Counter32,
|
|
rcStatOspfIfHelloIntervalMismatches Counter32,
|
|
rcStatOspfIfDeadIntervalMismatches Counter32,
|
|
rcStatOspfIfOptionMismatches Counter32
|
|
}
|
|
|
|
rcStatOspfIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero (0..6142)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value that is used to identify a
|
|
physical interface."
|
|
::= { rcStatOspfIfEntry 1 }
|
|
|
|
rcStatOspfIfRxHellos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number hello packets
|
|
received by this interface."
|
|
::= { rcStatOspfIfEntry 2 }
|
|
|
|
rcStatOspfIfRxDBDescrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number database descriptor
|
|
packets received by this interface."
|
|
::= { rcStatOspfIfEntry 3 }
|
|
|
|
rcStatOspfIfRxLSUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number Link state update
|
|
packets received by this interface."
|
|
::= { rcStatOspfIfEntry 4 }
|
|
|
|
rcStatOspfIfRxLSReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number Link state request
|
|
packets received by this interface."
|
|
::= { rcStatOspfIfEntry 5 }
|
|
|
|
rcStatOspfIfRxLSAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number Link state acknowlege
|
|
packets received by this interface."
|
|
::= { rcStatOspfIfEntry 6 }
|
|
|
|
rcStatOspfIfTxHellos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number hello packets
|
|
transmitted by this interface."
|
|
::= { rcStatOspfIfEntry 7 }
|
|
|
|
rcStatOspfIfTxDBDescrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number database descriptor
|
|
packets transmitted by this interface."
|
|
::= { rcStatOspfIfEntry 8 }
|
|
|
|
rcStatOspfIfTxLSUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number Link state update
|
|
packets transmitted by this interface."
|
|
::= { rcStatOspfIfEntry 9 }
|
|
|
|
rcStatOspfIfTxLSReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number Link state request
|
|
packets transmitted by this interface."
|
|
::= { rcStatOspfIfEntry 10 }
|
|
|
|
rcStatOspfIfTxLSAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number Link state acknowlege
|
|
packets transmitted by this interface."
|
|
::= { rcStatOspfIfEntry 11 }
|
|
|
|
rcStatOspfIfVersionMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number version
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfEntry 12 }
|
|
|
|
rcStatOspfIfAreaMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number area
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfEntry 13 }
|
|
|
|
rcStatOspfIfAuthTypeMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number AuthType
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfEntry 14 }
|
|
|
|
rcStatOspfIfAuthFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number Authentication
|
|
failures."
|
|
::= { rcStatOspfIfEntry 15 }
|
|
|
|
rcStatOspfIfNetMaskMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number net mask
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfEntry 16 }
|
|
|
|
rcStatOspfIfHelloIntervalMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number hello interval
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfEntry 17 }
|
|
|
|
rcStatOspfIfDeadIntervalMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number dead interval
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfEntry 18 }
|
|
|
|
rcStatOspfIfOptionMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number options
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfEntry 19 }
|
|
|
|
-- rcStatMlt Group
|
|
|
|
rcStatMlt OBJECT IDENTIFIER ::= { rcStat 6 }
|
|
|
|
rcStatMltIfExtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatMltIfExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store Mlt interface
|
|
statistics."
|
|
::= { rcStatMlt 1 }
|
|
|
|
rcStatMltIfExtnEntry OBJECT-TYPE
|
|
SYNTAX RcStatMltIfExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mlt interface statistics"
|
|
INDEX { rcStatMltIfExtnMltId }
|
|
::= { rcStatMltIfExtnTable 1 }
|
|
|
|
RcStatMltIfExtnEntry ::= SEQUENCE {
|
|
rcStatMltIfExtnMltId INTEGER,
|
|
rcStatMltIfExtnIfInMulticastPkts Counter32,
|
|
rcStatMltIfExtnIfInBroadcastPkts Counter32,
|
|
rcStatMltIfExtnIfOutMulticastPkts Counter32,
|
|
rcStatMltIfExtnIfOutBroadcastPkts Counter32,
|
|
rcStatMltIfExtnIfHCInOctets Counter64,
|
|
rcStatMltIfExtnIfHCInUcastPkts Counter64,
|
|
rcStatMltIfExtnIfHCInMulticastPkt Counter64,
|
|
rcStatMltIfExtnIfHCInBroadcastPkt Counter64,
|
|
rcStatMltIfExtnIfHCOutOctets Counter64,
|
|
rcStatMltIfExtnIfHCOutUcastPkts Counter64,
|
|
rcStatMltIfExtnIfHCOutMulticast Counter64,
|
|
rcStatMltIfExtnIfHCOutBroadcast Counter64,
|
|
rcStatMltIfExtnIfHCInLsmPkts Counter64,
|
|
rcStatMltIfExtnIfHCOutLsmPkts Counter64
|
|
}
|
|
|
|
rcStatMltIfExtnMltId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..512)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mlt Id"
|
|
::= { rcStatMltIfExtnEntry 1 }
|
|
|
|
rcStatMltIfExtnIfInMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "multi-pkts to upper"
|
|
::= { rcStatMltIfExtnEntry 2 }
|
|
|
|
rcStatMltIfExtnIfInBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "broad-pkts to upper"
|
|
::= { rcStatMltIfExtnEntry 3 }
|
|
|
|
rcStatMltIfExtnIfOutMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "multi-pkts from upper"
|
|
::= { rcStatMltIfExtnEntry 4 }
|
|
|
|
rcStatMltIfExtnIfOutBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "broad-pkts from upper"
|
|
::= { rcStatMltIfExtnEntry 5 }
|
|
|
|
rcStatMltIfExtnIfHCInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets received
|
|
on the MLT interface, including framing
|
|
characters."
|
|
::= { rcStatMltIfExtnEntry 6 }
|
|
|
|
rcStatMltIfExtnIfHCInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets delivered by this
|
|
MLT to a higher MLT that were not addressed
|
|
to a nulticast or broadcase address at this
|
|
sublayer."
|
|
::= { rcStatMltIfExtnEntry 7 }
|
|
|
|
rcStatMltIfExtnIfHCInMulticastPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets delivered to this MLT that
|
|
were addressed to a nulticast address at this
|
|
sublayer. For a MAC layer protocol, this number
|
|
includes both Group and Functional addresses."
|
|
::= { rcStatMltIfExtnEntry 8 }
|
|
|
|
rcStatMltIfExtnIfHCInBroadcastPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets delivered to this MLT that
|
|
were addressed to a broadcast address at this
|
|
sublayer."
|
|
::= { rcStatMltIfExtnEntry 9 }
|
|
|
|
rcStatMltIfExtnIfHCOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets transmitted
|
|
out of the MLT interface, including
|
|
framing characters."
|
|
::= { rcStatMltIfExtnEntry 10 }
|
|
|
|
rcStatMltIfExtnIfHCOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets that hight-level protocols
|
|
requested be transmitted that were not addressed
|
|
to a multicast address at this MLT. This total
|
|
number includes those packets discarded or unsent."
|
|
::= { rcStatMltIfExtnEntry 11 }
|
|
|
|
rcStatMltIfExtnIfHCOutMulticast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets that hight-level
|
|
protocols requested be transmitted, and that
|
|
were addressed to a multicast address at this
|
|
MLT, including those that were discarded or
|
|
not sent. For a MAC layer protocol, this
|
|
number includes both Group and Functional
|
|
addresses."
|
|
::= { rcStatMltIfExtnEntry 12 }
|
|
|
|
rcStatMltIfExtnIfHCOutBroadcast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets that hight-level
|
|
protocols requested be transmitted, and that
|
|
were addressed to a broadcase address at this
|
|
MLT, including those that were discarded or
|
|
not sent."
|
|
::= { rcStatMltIfExtnEntry 13 }
|
|
|
|
rcStatMltIfExtnIfHCInLsmPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of Link State Messaging (LSM)
|
|
packets delivered to this MLT."
|
|
|
|
::= { rcStatMltIfExtnEntry 14 }
|
|
|
|
rcStatMltIfExtnIfHCOutLsmPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of Link State Messaging (LSM)
|
|
packets trasmitted on this MLT."
|
|
|
|
::= { rcStatMltIfExtnEntry 15 }
|
|
|
|
-- Mlt Ether table
|
|
|
|
rcStatMltEtherTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatMltEtherEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store Mlt Ethernet
|
|
statistics."
|
|
::= { rcStatMlt 2 }
|
|
|
|
rcStatMltEtherEntry OBJECT-TYPE
|
|
SYNTAX RcStatMltEtherEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mlt enternet statistics"
|
|
INDEX { rcStatMltEtherMltId }
|
|
::= { rcStatMltEtherTable 1 }
|
|
|
|
RcStatMltEtherEntry ::= SEQUENCE {
|
|
rcStatMltEtherMltId INTEGER,
|
|
rcStatMltEtherAlignmentErrors Counter32,
|
|
rcStatMltEtherFCSErrors Counter32,
|
|
rcStatMltEtherSingleCollFrames Counter32,
|
|
rcStatMltEtherMultipleCollFrames Counter32,
|
|
rcStatMltEtherSQETestError Counter32,
|
|
rcStatMltEtherDeferredTransmiss Counter32,
|
|
rcStatMltEtherLateCollisions Counter32,
|
|
rcStatMltEtherExcessiveCollis Counter32,
|
|
rcStatMltEtherIMacTransmitError Counter32,
|
|
rcStatMltEtherCarrierSenseError Counter32,
|
|
rcStatMltEtherFrameTooLong Counter32,
|
|
rcStatMltEtherIMacReceiveError Counter32
|
|
}
|
|
|
|
rcStatMltEtherMltId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..512)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Multi-Link
|
|
Trunk associated with this entry."
|
|
::= { rcStatMltEtherEntry 1 }
|
|
|
|
rcStatMltEtherAlignmentErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames received on a particular MLT
|
|
that are not an integral number of octets in
|
|
length and do not pass the FCS check. The count
|
|
represented by an instance of this object is
|
|
incremented when the alignmentError status is
|
|
returned by the MAC service to the LLC (or other
|
|
MAC user). Received frames for which multiple
|
|
error conditions occur are, according to the
|
|
conventions of IEEE 802.3 Layer Management,
|
|
counted exclusively according to the error status
|
|
presented to the LLC."
|
|
::= { rcStatMltEtherEntry 2 }
|
|
|
|
rcStatMltEtherFCSErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames received on an MLT that are an
|
|
integral number of octets in length but do not pass
|
|
the FCS check. The count represented by an instance
|
|
of this object is incremented when the frameCheckError
|
|
status is returned by the MAC service to the LLC
|
|
(or other MAC user). Received frames for which
|
|
multiple error conditions occur are, according to
|
|
the conventions of IEEE 802.3 Layer Management,
|
|
counted exclusively according to the error status
|
|
presented to the LLC."
|
|
::= { rcStatMltEtherEntry 3 }
|
|
|
|
rcStatMltEtherSingleCollFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of successfully transmitted frames on
|
|
a particular MLT for which transmission is
|
|
inhibited by exactly one collision. A frame
|
|
that is counted by an instance of this objects
|
|
is also counted by the corresponding instance
|
|
of either the ifOutUcastPkts, ifOutMulticastPkts,
|
|
or ifOutBroadcastPkts, and it not counted by the
|
|
corresponding instance of the MultipleCollisionFrames
|
|
object."
|
|
::= { rcStatMltEtherEntry 4 }
|
|
|
|
rcStatMltEtherMultipleCollFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of successfully transmitted frames on
|
|
a particular MLT for which transmission is
|
|
inhibited by more than one collision. A frame
|
|
that is counted by an instance of this object
|
|
is also counted by the corresponding instance
|
|
of either the ifOutUcastPkts, ifOutMulticastPkts,
|
|
or ifOutBroadcastPkts, and is not counted by the
|
|
corresponding instance of the SingleCollisionFrames
|
|
objects."
|
|
::= { rcStatMltEtherEntry 5 }
|
|
|
|
rcStatMltEtherSQETestError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of times that the SQE TEST ERROR message
|
|
is generated by the PLS sublayer for a particular
|
|
MLT. SQE stands for Signal Quality Error."
|
|
::= { rcStatMltEtherEntry 6 }
|
|
|
|
rcStatMltEtherDeferredTransmiss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which the first transmission
|
|
attempt on a particular MLT is delayed because the
|
|
medium is busy. The count represented by an
|
|
instance of this object does not include frames
|
|
involved in collisions."
|
|
::= { rcStatMltEtherEntry 7 }
|
|
|
|
rcStatMltEtherLateCollisions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times that a collision is detected
|
|
on a particular MLT later than 512 bit-times
|
|
(64 octets) into the transmission of a packet.
|
|
Five hundred and twelve bit-times corresponds to
|
|
51.2 microseconds on a 10 mb/s system. A (late)
|
|
collision included in a count represented by an
|
|
instance of this object is also considered as a
|
|
(generic) collision for purposes of other
|
|
collision-related statistics."
|
|
::= { rcStatMltEtherEntry 8 }
|
|
|
|
rcStatMltEtherExcessiveCollis OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which transmission on a
|
|
particular MLT fails due to excessive collisions."
|
|
::= { rcStatMltEtherEntry 9 }
|
|
|
|
rcStatMltEtherIMacTransmitError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which transmission on a
|
|
particular MLT fails due to an internal MAC
|
|
sublayer transmit error. A frame is only counted
|
|
by an instance of this object if it is not counted
|
|
by the corresponding instance of either the
|
|
LateCollisions object, the ExcessiveCollisions
|
|
object, or the CarrierSenseError object."
|
|
::= { rcStatMltEtherEntry 10 }
|
|
|
|
rcStatMltEtherCarrierSenseError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times that the carrier sense
|
|
condition was lost or never asserted when
|
|
attempting to transmit a frame on a particular
|
|
MLT. The count represented by an instance of
|
|
this object is incremented at most once per
|
|
transmission attempt, even if the carrier
|
|
sense condition fluctuates during a
|
|
transmission attempt."
|
|
::= { rcStatMltEtherEntry 11 }
|
|
|
|
rcStatMltEtherFrameTooLong OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames received on a particular MLT
|
|
that exceed the maximum permitted size (1518
|
|
octets). The count represented by an instance
|
|
os this object is incremented when the frame
|
|
TooLong status is returned by the MAC service
|
|
to the LLC (or other MAC user). Received frames
|
|
for which multiple error conditions occur are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
::= { rcStatMltEtherEntry 12 }
|
|
|
|
rcStatMltEtherIMacReceiveError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which reception on a
|
|
particular MLT fails due to an internal MAC
|
|
sublayer receive error. A frame is only
|
|
counted by an instance of this object if it
|
|
is not counted by the corresponding instance
|
|
of either the FrameTooLongs object, the
|
|
AlignmentErrors object, of the FCSErrors
|
|
objects.
|
|
The precise meaning of the count represented
|
|
by an instance of this object is implementation
|
|
specific. In particular, an instance of this
|
|
object may represent a count of receive errors
|
|
on a particular interface that are not otherwise
|
|
counted."
|
|
::= { rcStatMltEtherEntry 13 }
|
|
|
|
|
|
-- Mlt Ip table
|
|
|
|
rcStatMltIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatMltIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to store Mlt Ip statistics."
|
|
::= { rcStatMlt 3 }
|
|
|
|
rcStatMltIpEntry OBJECT-TYPE
|
|
SYNTAX RcStatMltIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Mlt enternet statistics"
|
|
INDEX { rcStatMltIpMltId }
|
|
::= { rcStatMltIpTable 1 }
|
|
|
|
RcStatMltIpEntry ::= SEQUENCE {
|
|
rcStatMltIpMltId INTEGER,
|
|
rcStatMltIpInReceives Counter32,
|
|
rcStatMltIpInHdrErrors Counter32,
|
|
rcStatMltIpInAddrErrors Counter32,
|
|
rcStatMltIpForwDatagrams Counter32,
|
|
rcStatMltIpInUnknownProtos Counter32,
|
|
rcStatMltIpInDiscards Counter32,
|
|
rcStatMltIpInDelivers Counter32,
|
|
rcStatMltIpOutRequest Counter32,
|
|
rcStatMltIpOutDiscards Counter32,
|
|
rcStatMltIpOutNoRoutes Counter32,
|
|
rcStatMltIpReasmReqds Counter32,
|
|
rcStatMltIpReasmOKs Counter32,
|
|
rcStatMltIpReasmFails Counter32,
|
|
rcStatMltIpFragOKs Counter32,
|
|
rcStatMltIpFragFails Counter32,
|
|
rcStatMltIpFragCreates Counter32,
|
|
rcStatMltIpRoutingDiscards Counter32
|
|
}
|
|
|
|
rcStatMltIpMltId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Mlt Id"
|
|
::= { rcStatMltIpEntry 1 }
|
|
|
|
rcStatMltIpInReceives OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "all incoming packets"
|
|
::= { rcStatMltIpEntry 2 }
|
|
|
|
rcStatMltIpInHdrErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "hdr errors detected"
|
|
::= { rcStatMltIpEntry 3 }
|
|
|
|
rcStatMltIpInAddrErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "bad dest. ip addr"
|
|
::= { rcStatMltIpEntry 4 }
|
|
|
|
rcStatMltIpForwDatagrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "packets forwarded"
|
|
::= { rcStatMltIpEntry 5 }
|
|
|
|
rcStatMltIpInUnknownProtos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "unsupported protocol"
|
|
::= { rcStatMltIpEntry 6 }
|
|
|
|
rcStatMltIpInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "good, but no buffer"
|
|
::= { rcStatMltIpEntry 7 }
|
|
|
|
rcStatMltIpInDelivers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "pkts delivered to upper"
|
|
::= { rcStatMltIpEntry 8 }
|
|
|
|
rcStatMltIpOutRequest OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "pkts received from upper"
|
|
::= { rcStatMltIpEntry 9 }
|
|
|
|
rcStatMltIpOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "good, but no buffer"
|
|
::= { rcStatMltIpEntry 10 }
|
|
|
|
rcStatMltIpOutNoRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "no route to destination"
|
|
::= { rcStatMltIpEntry 11 }
|
|
|
|
rcStatMltIpReasmReqds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "fragments to reassem"
|
|
::= { rcStatMltIpEntry 12 }
|
|
|
|
rcStatMltIpReasmOKs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "reassembled successfully"
|
|
::= { rcStatMltIpEntry 13 }
|
|
|
|
rcStatMltIpReasmFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "reassembly failures"
|
|
::= { rcStatMltIpEntry 14 }
|
|
|
|
rcStatMltIpFragOKs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "fragment successfully"
|
|
::= { rcStatMltIpEntry 15 }
|
|
|
|
rcStatMltIpFragFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "fragment failure"
|
|
::= { rcStatMltIpEntry 16 }
|
|
|
|
rcStatMltIpFragCreates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "pkts due to fragmenting"
|
|
::= { rcStatMltIpEntry 17 }
|
|
|
|
rcStatMltIpRoutingDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Route entries removed"
|
|
::= { rcStatMltIpEntry 18 }
|
|
|
|
rcStatSmltIstDownCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts how the session between the
|
|
two peering switches has done down since last boot."
|
|
::= { rcStatMlt 4 }
|
|
|
|
rcStatSmltHelloTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx hello msg."
|
|
::= { rcStatMlt 5 }
|
|
|
|
rcStatSmltHelloRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx hello msg."
|
|
::= { rcStatMlt 6 }
|
|
|
|
rcStatSmltLearnMacAddrTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx learn Mac Address msg."
|
|
::= { rcStatMlt 7 }
|
|
|
|
rcStatSmltLearnMacAddrRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx learn Mac Address msg."
|
|
::= { rcStatMlt 8 }
|
|
|
|
rcStatSmltMacAddrAgeOutTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx Mac Address Aging Out msg."
|
|
::= { rcStatMlt 9 }
|
|
|
|
rcStatSmltMacAddrAgeOutRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx Mac Address Aging Out msg."
|
|
::= { rcStatMlt 10 }
|
|
|
|
rcStatSmltMacAddrAgeExpTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx Mac Address age expired msg."
|
|
::= { rcStatMlt 11 }
|
|
|
|
rcStatSmltMacAddrAgeExpRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx Mac Address age expired msg."
|
|
::= { rcStatMlt 12 }
|
|
|
|
rcStatSmltStgInfoTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx Stg information msg."
|
|
::= { rcStatMlt 13 }
|
|
|
|
rcStatSmltStgInfoRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx Stg information msg."
|
|
::= { rcStatMlt 14 }
|
|
|
|
rcStatSmltDelMacAddrTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx deleted MAC address msg."
|
|
::= { rcStatMlt 15 }
|
|
|
|
rcStatSmltDelMacAddrRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx deleted MAC address msg."
|
|
::= { rcStatMlt 16 }
|
|
|
|
rcStatSmltSmltDownTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx Smlt Down msg."
|
|
::= { rcStatMlt 17 }
|
|
|
|
rcStatSmltSmltDownRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx Smlt Down msg."
|
|
::= { rcStatMlt 18 }
|
|
|
|
rcStatSmltSmltUpTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx Smlt Up msg."
|
|
::= { rcStatMlt 19 }
|
|
|
|
rcStatSmltSmltUpRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx Smlt Up msg."
|
|
::= { rcStatMlt 20 }
|
|
|
|
rcStatSmltSendMacTblTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx Send Mac Table msg."
|
|
::= { rcStatMlt 21 }
|
|
|
|
rcStatSmltSendMacTblRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx Send Mac Table msg."
|
|
::= { rcStatMlt 22 }
|
|
|
|
rcStatSmltIgmpTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx Igmp msg."
|
|
::= { rcStatMlt 23 }
|
|
|
|
rcStatSmltIgmpRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx Igmp msg."
|
|
::= { rcStatMlt 24 }
|
|
|
|
rcStatSmltPortDownTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx port down msg."
|
|
::= { rcStatMlt 25 }
|
|
|
|
rcStatSmltPortDownRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx port down msg."
|
|
::= { rcStatMlt 26 }
|
|
|
|
rcStatSmltReqMacTblTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the tx request Mac table msg."
|
|
::= { rcStatMlt 27 }
|
|
|
|
rcStatSmltReqMacTblRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx request Mac table msg."
|
|
::= { rcStatMlt 28 }
|
|
|
|
rcStatSmltRxUnknownMsgTypeCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counters that counts the rx unknown msg type."
|
|
::= { rcStatMlt 29 }
|
|
|
|
rcStatMltIfUtilTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatMltIfUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store Mlt interface utilization."
|
|
::= { rcStatMlt 30 }
|
|
|
|
rcStatMltIfUtilEntry OBJECT-TYPE
|
|
SYNTAX RcStatMltIfUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mlt interface utilization"
|
|
INDEX { rcStatMltIfUtilMltId }
|
|
::= { rcStatMltIfUtilTable 1 }
|
|
|
|
RcStatMltIfUtilEntry ::= SEQUENCE {
|
|
rcStatMltIfUtilMltId Integer32,
|
|
rcStatMltIfUtilIfHCInOctets Counter64,
|
|
rcStatMltIfUtilIfHCInUtil Gauge32,
|
|
rcStatMltIfUtilIfHCOutOctets Counter64,
|
|
rcStatMltIfUtilIfHCOutUtil Gauge32
|
|
}
|
|
|
|
rcStatMltIfUtilMltId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "To assign an Id within the range specified to the
|
|
Mlt created "
|
|
::= { rcStatMltIfUtilEntry 1 }
|
|
|
|
rcStatMltIfUtilIfHCInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets received
|
|
on the MLT interface, including framing characters."
|
|
::= { rcStatMltIfUtilEntry 2 }
|
|
|
|
rcStatMltIfUtilIfHCInUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The best estimate of the mean physical layer network
|
|
utilization on this interface during this interval,
|
|
in percent."
|
|
::= { rcStatMltIfUtilEntry 3}
|
|
|
|
rcStatMltIfUtilIfHCOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets transmitted out of the
|
|
MLT interface, including framing characters."
|
|
::= { rcStatMltIfUtilEntry 4 }
|
|
|
|
|
|
rcStatMltIfUtilIfHCOutUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The best estimate of the mean physical layer network
|
|
utilization on this interface during this interval,
|
|
in percent."
|
|
::= { rcStatMltIfUtilEntry 5 }
|
|
|
|
rcStatSmltLacpInfoRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LACP info msgs received."
|
|
::= { rcStatMlt 31 }
|
|
|
|
rcStatSmltLacpInfoTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LACP info msgs transmitted."
|
|
::= { rcStatMlt 32 }
|
|
|
|
-- MLT utilization statistics per port
|
|
|
|
rcStatMltUtilTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatMltUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table used to store statistics for MLT members utilization."
|
|
::= { rcStatMlt 33 }
|
|
|
|
rcStatMltUtilEntry OBJECT-TYPE
|
|
SYNTAX RcStatMltUtilEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry for MLT members utilization statistics table."
|
|
INDEX { rcMltId,
|
|
rcStatMltUtilPortIfIndex,
|
|
rcStatMltUtilTrafficType }
|
|
::= { rcStatMltUtilTable 1 }
|
|
|
|
RcStatMltUtilEntry ::= SEQUENCE {
|
|
rcStatMltUtilPortIfIndex InterfaceIndex,
|
|
rcStatMltUtilTrafficType INTEGER,
|
|
rcStatMltUtilTrafficLast5Min Gauge32,
|
|
rcStatMltUtilTrafficLast30Min Gauge32,
|
|
rcStatMltUtilTrafficLast1Hour Gauge32
|
|
}
|
|
|
|
rcStatMltUtilPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port ifIndex, member of rcMltId."
|
|
::= { rcStatMltUtilEntry 1 }
|
|
|
|
rcStatMltUtilTrafficType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rx(1),
|
|
tx(2),
|
|
rxTx(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Type of traffic for one MLT port interface."
|
|
::= { rcStatMltUtilEntry 2 }
|
|
|
|
rcStatMltUtilTrafficLast5Min OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the percentage of traffic on one MLT port interface for the last 5 minutes."
|
|
::= { rcStatMltUtilEntry 3 }
|
|
|
|
rcStatMltUtilTrafficLast30Min OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the percentage of traffic on one MLT port interface for the last 30 minutes."
|
|
::= { rcStatMltUtilEntry 4 }
|
|
|
|
rcStatMltUtilTrafficLast1Hour OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the percentage of traffic on one MLT port interface for the last hour."
|
|
::= { rcStatMltUtilEntry 5 }
|
|
|
|
rcStatSmltSpbmInfoTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM information tx messages."
|
|
::= { rcStatMlt 34 }
|
|
|
|
rcStatSmltSpbmInfoFailTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM information Fail tx messages."
|
|
::= { rcStatMlt 35 }
|
|
|
|
rcStatSmltSpbmInfoRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM information rx messages."
|
|
::= { rcStatMlt 36 }
|
|
|
|
rcStatSmltSpbmLearnMacRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM learn Mac rx messages."
|
|
::= { rcStatMlt 37 }
|
|
|
|
rcStatSmltSpbmLearnMacTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM learn Mac tx messages."
|
|
::= { rcStatMlt 38 }
|
|
|
|
rcStatSmltSpbmDelMacRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM delete Mac rx messages."
|
|
::= { rcStatMlt 39 }
|
|
|
|
rcStatSmltSpbmDelMacTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM delete Mac tx messages."
|
|
::= { rcStatMlt 40 }
|
|
|
|
rcStatSmltSpbmMacAgeOutRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM Mac Aging Out rx messages."
|
|
::= { rcStatMlt 41 }
|
|
|
|
rcStatSmltSpbmMacAgeOutTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM Mac Aging Out tx messages."
|
|
::= { rcStatMlt 42 }
|
|
|
|
rcStatSmltSpbmMacTblRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object returns the number of SPBM Mac Table rx messages."
|
|
::= { rcStatMlt 43 }
|
|
|
|
rcStatSmltPortTblSyncReqTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt table sync request tx msg counter"
|
|
::= { rcStatMlt 44 }
|
|
|
|
rcStatSmltPortTblSyncReqRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt table sync request rx msg counter"
|
|
::= { rcStatMlt 45 }
|
|
|
|
rcStatSmltPortTblSyncTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt table sync tx msg counter"
|
|
::= { rcStatMlt 46}
|
|
|
|
rcStatSmltPortTblSyncRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt table sync rx msg counter"
|
|
::= { rcStatMlt 47 }
|
|
|
|
rcStatSmltPortUpdateTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt port update tx msg counter"
|
|
::= { rcStatMlt 48 }
|
|
|
|
rcStatSmltPortUpdateRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt port update rx msg counter"
|
|
::= { rcStatMlt 49 }
|
|
|
|
rcStatSmltEntryUpdateTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt Entry update tx msg counter"
|
|
::= { rcStatMlt 50 }
|
|
|
|
rcStatSmltEntryUpdateRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt Entry update rx msg counter"
|
|
::= { rcStatMlt 51 }
|
|
|
|
rcStatSmltDialectNegotiateTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt protocol ID tx msg counter"
|
|
::= { rcStatMlt 52 }
|
|
|
|
rcStatSmltDialectNegotiateRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt protocol ID rx msg counter"
|
|
::= { rcStatMlt 53 }
|
|
|
|
rcStatSmltUpdateRespTxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt update response tx msg counter"
|
|
::= { rcStatMlt 54 }
|
|
|
|
rcStatSmltUpdateRespRxMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt update response rx msg counter"
|
|
::= { rcStatMlt 55 }
|
|
|
|
rcStatSmltTransQHighWaterMarkMsgCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt transaction Queue high watermark msg count"
|
|
::= { rcStatMlt 56 }
|
|
|
|
rcStatSmltPollCountHighWaterMarkCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Smlt poll count high watermark count"
|
|
::= { rcStatMlt 57 }
|
|
|
|
-- Stat Ospf Ip Interface Table
|
|
-- replaces Stat Ospf Interface Table
|
|
|
|
rcStatOspfIfV2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatOspfIfV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A table used to store OSPF interface
|
|
statistics."
|
|
::= { rcStat 7 }
|
|
|
|
rcStatOspfIfV2Entry OBJECT-TYPE
|
|
SYNTAX RcStatOspfIfV2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Ospf interface statistics"
|
|
INDEX { rcStatOspfIfV2Index, rcStatOspfIfV2Addr }
|
|
::= { rcStatOspfIfV2Table 1 }
|
|
|
|
RcStatOspfIfV2Entry ::= SEQUENCE {
|
|
rcStatOspfIfV2Index InterfaceIndexOrZero,
|
|
rcStatOspfIfV2Addr IpAddress,
|
|
rcStatOspfIfV2RxHellos Counter32,
|
|
rcStatOspfIfV2RxDBDescrs Counter32,
|
|
rcStatOspfIfV2RxLSUpdates Counter32,
|
|
rcStatOspfIfV2RxLSReqs Counter32,
|
|
rcStatOspfIfV2RxLSAcks Counter32,
|
|
rcStatOspfIfV2TxHellos Counter32,
|
|
rcStatOspfIfV2TxDBDescrs Counter32,
|
|
rcStatOspfIfV2TxLSUpdates Counter32,
|
|
rcStatOspfIfV2TxLSReqs Counter32,
|
|
rcStatOspfIfV2TxLSAcks Counter32,
|
|
rcStatOspfIfV2VersionMismatches Counter32,
|
|
rcStatOspfIfV2AreaMismatches Counter32,
|
|
rcStatOspfIfV2AuthTypeMismatches Counter32,
|
|
rcStatOspfIfV2AuthFailures Counter32,
|
|
rcStatOspfIfV2NetMaskMismatches Counter32,
|
|
rcStatOspfIfV2HelloIntervalMismatches Counter32,
|
|
rcStatOspfIfV2DeadIntervalMismatches Counter32,
|
|
rcStatOspfIfV2OptionMismatches Counter32
|
|
}
|
|
|
|
rcStatOspfIfV2Index OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero (0..6142)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "An unique value that is used to identify a
|
|
physical interface."
|
|
::= { rcStatOspfIfV2Entry 1 }
|
|
|
|
rcStatOspfIfV2Addr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Ip Address"
|
|
::= { rcStatOspfIfV2Entry 2 }
|
|
|
|
rcStatOspfIfV2RxHellos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number hello packets
|
|
received by this interface."
|
|
::= { rcStatOspfIfV2Entry 3 }
|
|
|
|
rcStatOspfIfV2RxDBDescrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number database descriptor
|
|
packets received by this interface."
|
|
::= { rcStatOspfIfV2Entry 4 }
|
|
|
|
rcStatOspfIfV2RxLSUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number Link state update
|
|
packets received by this interface."
|
|
::= { rcStatOspfIfV2Entry 5 }
|
|
|
|
rcStatOspfIfV2RxLSReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number Link state request
|
|
packets received by this interface."
|
|
::= { rcStatOspfIfV2Entry 6 }
|
|
|
|
rcStatOspfIfV2RxLSAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number Link state acknowlege
|
|
packets received by this interface."
|
|
::= { rcStatOspfIfV2Entry 7 }
|
|
|
|
rcStatOspfIfV2TxHellos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number hello packets
|
|
transmitted by this interface."
|
|
::= { rcStatOspfIfV2Entry 8 }
|
|
|
|
rcStatOspfIfV2TxDBDescrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number database descriptor
|
|
packets transmitted by this interface."
|
|
::= { rcStatOspfIfV2Entry 9 }
|
|
|
|
rcStatOspfIfV2TxLSUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number Link state update
|
|
packets transmitted by this interface."
|
|
::= { rcStatOspfIfV2Entry 10 }
|
|
|
|
rcStatOspfIfV2TxLSReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number Link state request
|
|
packets transmitted by this interface."
|
|
::= { rcStatOspfIfV2Entry 11 }
|
|
|
|
rcStatOspfIfV2TxLSAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number Link state acknowlege
|
|
packets transmitted by this interface."
|
|
::= { rcStatOspfIfV2Entry 12 }
|
|
|
|
rcStatOspfIfV2VersionMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number version
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfV2Entry 13 }
|
|
|
|
rcStatOspfIfV2AreaMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number area
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfV2Entry 14 }
|
|
|
|
rcStatOspfIfV2AuthTypeMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number AuthType
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfV2Entry 15 }
|
|
|
|
rcStatOspfIfV2AuthFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number Authentication
|
|
failures."
|
|
::= { rcStatOspfIfV2Entry 16 }
|
|
|
|
rcStatOspfIfV2NetMaskMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number net mask
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfV2Entry 17 }
|
|
|
|
rcStatOspfIfV2HelloIntervalMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number hello interval
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfV2Entry 18 }
|
|
|
|
rcStatOspfIfV2DeadIntervalMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number dead interval
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfV2Entry 19 }
|
|
|
|
rcStatOspfIfV2OptionMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number options
|
|
mismatches received by this interface."
|
|
::= { rcStatOspfIfV2Entry 20 }
|
|
|
|
|
|
-- rcStatPos Group
|
|
|
|
rcStatPos OBJECT IDENTIFIER ::= { rcStat 8 }
|
|
|
|
-- the Statistics Pos Control table
|
|
|
|
rcStatPosControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatPosControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcStatPos 1 }
|
|
|
|
rcStatPosControlEntry OBJECT-TYPE
|
|
SYNTAX RcStatPosControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcStatPosControlPortIndex }
|
|
::= { rcStatPosControlTable 1 }
|
|
|
|
RcStatPosControlEntry ::=
|
|
SEQUENCE {
|
|
rcStatPosControlPortIndex InterfaceIndex,
|
|
rcStatPosControlInErrors Counter32,
|
|
rcStatPosControlInUnknownProtos Counter32,
|
|
rcStatPosControlOutErrors Counter32,
|
|
rcStatPosControlHCInOctets Counter64,
|
|
rcStatPosControlHCInUcastPkts Counter64,
|
|
rcStatPosControlHCInMulticastPkts Counter64,
|
|
rcStatPosControlHCInBroadcastPkts Counter64,
|
|
rcStatPosControlHCInDiscards Counter64,
|
|
rcStatPosControlHCOutOctets Counter64,
|
|
rcStatPosControlHCOutUcastPkts Counter64,
|
|
rcStatPosControlHCOutMulticastPkts Counter64,
|
|
rcStatPosControlHCOutBroadcastPkts Counter64,
|
|
rcStatPosControlHCOutDiscards Counter64
|
|
}
|
|
|
|
rcStatPosControlPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A unique value for each port."
|
|
::= { rcStatPosControlEntry 1 }
|
|
|
|
rcStatPosControlInErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of error pkts received
|
|
on the interface."
|
|
::= { rcStatPosControlEntry 2 }
|
|
|
|
rcStatPosControlInUnknownProtos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets received via the interface
|
|
which were discarded because of an unknown or
|
|
unsupported protocol."
|
|
::= { rcStatPosControlEntry 3 }
|
|
|
|
rcStatPosControlOutErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of outbound packets that could not be
|
|
transmitted because of errors."
|
|
::= { rcStatPosControlEntry 4 }
|
|
|
|
rcStatPosControlHCInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets received of the
|
|
interface, including framing characters."
|
|
::= { rcStatPosControlEntry 5 }
|
|
|
|
rcStatPosControlHCInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of subnetwork-unicast packets
|
|
received from a higher-layer protocol."
|
|
::= { rcStatPosControlEntry 6 }
|
|
|
|
rcStatPosControlHCInMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of multicast packets
|
|
received from a higher-layer protocol."
|
|
::= { rcStatPosControlEntry 7 }
|
|
|
|
rcStatPosControlHCInBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of broadcast packets
|
|
received from a higher-layer protocol."
|
|
::= { rcStatPosControlEntry 8 }
|
|
|
|
rcStatPosControlHCInDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of inbound packets which were chosen to be
|
|
discarded even though no errors had been detected to
|
|
prevent their being deliverable to a higher-layer
|
|
protocol."
|
|
::= { rcStatPosControlEntry 9 }
|
|
|
|
rcStatPosControlHCOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets trasmitted out of the
|
|
interface, including framing characters."
|
|
::= { rcStatPosControlEntry 10 }
|
|
|
|
rcStatPosControlHCOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets that higher-level
|
|
protocols requested be transmitted to a
|
|
subnetwork-unicast address, including those that
|
|
were discarded or not sent."
|
|
::= { rcStatPosControlEntry 11 }
|
|
|
|
rcStatPosControlHCOutMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of multicast packets
|
|
delivered to a higher-layer protocol."
|
|
::= { rcStatPosControlEntry 12 }
|
|
|
|
rcStatPosControlHCOutBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of broadcast packets
|
|
delivered to a higher-layer protocol."
|
|
::= { rcStatPosControlEntry 13 }
|
|
|
|
rcStatPosControlHCOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of outbound packets which were chosen to
|
|
be discarded even though no errors had been detected
|
|
to prevent their being transmitted."
|
|
::= { rcStatPosControlEntry 14 }
|
|
|
|
|
|
-- Common resource threshold exceeded counter for all multicast protocols
|
|
-- active on the chassis
|
|
|
|
rcStatMulticast OBJECT IDENTIFIER ::= { rcStat 9 }
|
|
|
|
rcStatMulticastSourceGroupThresholdExceeded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of number of times the threshold of
|
|
available IP Multicast (Source,Group) Records was
|
|
reached. When this threshold is reached, a new IP
|
|
Multicast stream ingressing the switch cannot be
|
|
forwarded."
|
|
::= { rcStatMulticast 1 }
|
|
|
|
rcStatMulticastEgressStreamThresholdExceeded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of number of times the threshold of
|
|
available IP Multicast Egress Forwarding Records was
|
|
reached. When this threshold is reached, a new IP
|
|
Multicast Receiver that needs new Egress Forwarding
|
|
Record (PepStrem Record) will not be programmed to
|
|
receive the subscribing multicast stream."
|
|
::= { rcStatMulticast 2 }
|
|
|
|
rcStatBgp OBJECT IDENTIFIER ::= { rcStat 10 }
|
|
|
|
rcStatBgpStarts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times BGP connection started"
|
|
::= { rcStatBgp 1 }
|
|
|
|
rcStatBgpStops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times BGP connection stopped"
|
|
::= { rcStatBgp 2 }
|
|
|
|
rcStatBgpOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times BGP opens TCP"
|
|
::= { rcStatBgp 3 }
|
|
|
|
rcStatBgpCloses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times BGP closes TCP"
|
|
::= { rcStatBgp 4 }
|
|
|
|
rcStatBgpFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times TCP attempts failed"
|
|
::= { rcStatBgp 5 }
|
|
|
|
rcStatBgpFatals OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times TCP crashes due to fatal error"
|
|
::= { rcStatBgp 6 }
|
|
|
|
rcStatBgpConnExps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times TCP retry timer expired"
|
|
::= { rcStatBgp 7 }
|
|
|
|
rcStatBgpHoldExps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times hold timer expired"
|
|
::= { rcStatBgp 8 }
|
|
|
|
rcStatBgpKeepExps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times keepalive timer expired"
|
|
::= { rcStatBgp 9 }
|
|
|
|
rcStatBgpRxOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of OPENs BGP receives"
|
|
::= { rcStatBgp 10 }
|
|
|
|
rcStatBgpRxKeeps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of KEEPALIVEs BGP recieves"
|
|
::= { rcStatBgp 11 }
|
|
|
|
rcStatBgpRxUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of UPDATEs BGP recieves "
|
|
::= { rcStatBgp 12 }
|
|
|
|
rcStatBgpRxNotifys OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number NOTIFICATIONs BGP recieves "
|
|
::= { rcStatBgp 13 }
|
|
|
|
rcStatBgpTxOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of OPENs BGP transmitted"
|
|
::= { rcStatBgp 14 }
|
|
|
|
rcStatBgpTxKeeps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of KEEPALIVEs BGP transmitted"
|
|
::= { rcStatBgp 15 }
|
|
|
|
rcStatBgpTxUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of UPDATEs BGP transmits"
|
|
::= { rcStatBgp 16 }
|
|
|
|
rcStatBgpTxNotifys OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of NOTIFICATIONs BGP transmits"
|
|
::= { rcStatBgp 17 }
|
|
|
|
rcStatBgpBadEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of invalid events FSM received"
|
|
::= { rcStatBgp 18 }
|
|
|
|
rcStatBgpSyncFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times FDB sync failed"
|
|
::= { rcStatBgp 19 }
|
|
|
|
rcStatBgpTrEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Trace event"
|
|
::= { rcStatBgp 20 }
|
|
|
|
-- Rx
|
|
rcStatBgpRxECodeHeader OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Header errors received"
|
|
::= { rcStatBgp 21 }
|
|
|
|
rcStatBgpRxECodeOpen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Open errors received"
|
|
::= { rcStatBgp 22 }
|
|
|
|
rcStatBgpRxECodeUpdate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Update errors received"
|
|
::= { rcStatBgp 23 }
|
|
|
|
rcStatBgpRxECodeHoldtimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Holdtimer errors received"
|
|
::= { rcStatBgp 24 }
|
|
|
|
rcStatBgpRxECodeFSM OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total FSM errors received"
|
|
::= { rcStatBgp 25 }
|
|
|
|
rcStatBgpRxECodeCease OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Cease errors received"
|
|
::= { rcStatBgp 26 }
|
|
|
|
-- Header
|
|
rcStatBgpRxHdrCodeNoSync OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header Not Synchronized errors received"
|
|
::= { rcStatBgp 27 }
|
|
|
|
rcStatBgpRxHdrCodeInvalidMsgLen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header Invalid msg len errors received"
|
|
::= { rcStatBgp 28 }
|
|
|
|
rcStatBgpRxHdrCodeInvalidMsgType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header Invalid msg type errors received"
|
|
::= { rcStatBgp 29 }
|
|
|
|
|
|
-- Open
|
|
rcStatBgpRxOpCodeBadVer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors received: Bad Version"
|
|
::= { rcStatBgp 30 }
|
|
|
|
rcStatBgpRxOpCodeBadAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors received: Bad AS Number"
|
|
::= { rcStatBgp 31 }
|
|
|
|
rcStatBgpRxOpCodeBadRtID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors received: Bad BGP Rtr ID"
|
|
::= { rcStatBgp 32 }
|
|
|
|
rcStatBgpRxOpCodeUnsuppOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors received: Unsupported Option"
|
|
::= { rcStatBgp 33 }
|
|
|
|
rcStatBgpRxOpCodeAuthFail OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors received: Auth Failures"
|
|
::= { rcStatBgp 34 }
|
|
|
|
rcStatBgpRxOpCodeBadHold OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors received: Bad Hold Value"
|
|
::= { rcStatBgp 35 }
|
|
|
|
-- Update
|
|
|
|
rcStatBgpRxUpdCodeMalformedAttrList OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received:Malformed Attr List"
|
|
::= { rcStatBgp 36 }
|
|
|
|
rcStatBgpRxUpdCodeWelknownAttrUnrecog OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: Welknown Attr Unrecog"
|
|
::= { rcStatBgp 37 }
|
|
|
|
rcStatBgpRxUpdCodeWelknownAttrMiss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: Welknown Attr Missing"
|
|
::= { rcStatBgp 38 }
|
|
|
|
rcStatBgpRxUpdCodeAttrFlagError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: Attr Flag Error"
|
|
::= { rcStatBgp 39 }
|
|
|
|
rcStatBgpRxUpdCodeAttrLenError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: Attr Len Error"
|
|
::= { rcStatBgp 40 }
|
|
|
|
rcStatBgpRxUpdCodeBadORIGINAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: Bad ORIGIN Attr"
|
|
::= { rcStatBgp 41 }
|
|
|
|
rcStatBgpRxUpdCodeASRoutingLoop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: AS Routing Loop"
|
|
::= { rcStatBgp 42 }
|
|
|
|
rcStatBgpRxUpdCodeBadNHAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: Bad NEXT-HOP Attr"
|
|
::= { rcStatBgp 43 }
|
|
|
|
rcStatBgpRxUpdCodeOptionalAttrError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: Optional Attr Error"
|
|
::= { rcStatBgp 44 }
|
|
|
|
rcStatBgpRxUpdCodeBadNetworkField OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: Bad Network Field"
|
|
::= { rcStatBgp 45 }
|
|
|
|
rcStatBgpRxUpdCodeMalformedASPath OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors received: Malformed AS Path"
|
|
::= { rcStatBgp 46 }
|
|
|
|
-- Tx
|
|
rcStatBgpTxECodeHeader OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Header errors transmitted"
|
|
::= { rcStatBgp 47 }
|
|
|
|
rcStatBgpTxECodeOpen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Open errors transmitted"
|
|
::= { rcStatBgp 48 }
|
|
|
|
rcStatBgpTxECodeUpdate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Update errors transmitted"
|
|
::= { rcStatBgp 49 }
|
|
|
|
rcStatBgpTxECodeHoldtimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Holdtimer errors transmitted"
|
|
::= { rcStatBgp 50 }
|
|
|
|
rcStatBgpTxECodeFSM OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total FSM errors transmitted"
|
|
::= { rcStatBgp 51 }
|
|
|
|
rcStatBgpTxECodeCease OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Cease errors transmitted"
|
|
::= { rcStatBgp 52 }
|
|
|
|
-- Header
|
|
rcStatBgpTxHdrCodeNoSync OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header Not Synchronized errors transmitted"
|
|
::= { rcStatBgp 53 }
|
|
|
|
rcStatBgpTxHdrCodeInvalidMsgLen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header Invalid msg len errors transmitted"
|
|
::= { rcStatBgp 54 }
|
|
|
|
rcStatBgpTxHdrCodeInvalidMsgType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header Invalid msg type errors transmitted"
|
|
::= { rcStatBgp 55 }
|
|
|
|
|
|
-- Open
|
|
rcStatBgpTxOpCodeBadVer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors transmitted: Bad Version"
|
|
::= { rcStatBgp 56 }
|
|
|
|
rcStatBgpTxOpCodeBadAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors transmitted: Bad AS Number"
|
|
::= { rcStatBgp 57 }
|
|
|
|
rcStatBgpTxOpCodeBadRtID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors transmitted: Bad BGP Rtr ID"
|
|
::= { rcStatBgp 58 }
|
|
|
|
rcStatBgpTxOpCodeUnsuppOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors transmitted: Unsupported Option"
|
|
::= { rcStatBgp 59 }
|
|
|
|
rcStatBgpTxOpCodeAuthFail OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors transmitted: Auth Failures"
|
|
::= { rcStatBgp 60 }
|
|
|
|
rcStatBgpTxOpCodeBadHold OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors transmitted: Bad Hold Value"
|
|
::= { rcStatBgp 61 }
|
|
|
|
-- Update
|
|
|
|
rcStatBgpTxUpdCodeMalformedAttrList OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted:Malformed Attr List"
|
|
::= { rcStatBgp 62 }
|
|
|
|
rcStatBgpTxUpdCodeWelknownAttrUnrecog OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: Welknown Attr Unrecog"
|
|
::= { rcStatBgp 63 }
|
|
|
|
rcStatBgpTxUpdCodeWelknownAttrMiss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: Welknown Attr Missing"
|
|
::= { rcStatBgp 64 }
|
|
|
|
rcStatBgpTxUpdCodeAttrFlagError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: Attr Flag Error"
|
|
::= { rcStatBgp 65 }
|
|
|
|
rcStatBgpTxUpdCodeAttrLenError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: Attr Len Error"
|
|
::= { rcStatBgp 66 }
|
|
|
|
rcStatBgpTxUpdCodeBadORIGINAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: Bad ORIGIN Attr"
|
|
::= { rcStatBgp 67 }
|
|
|
|
rcStatBgpTxUpdCodeASRoutingLoop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: AS Routing Loop"
|
|
::= { rcStatBgp 68 }
|
|
|
|
rcStatBgpTxUpdCodeBadNHAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: Bad NEXT-HOP Attr"
|
|
::= { rcStatBgp 69 }
|
|
|
|
rcStatBgpTxUpdCodeOptionalAttrError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: Optional Attr Error"
|
|
::= { rcStatBgp 70 }
|
|
|
|
rcStatBgpTxUpdCodeBadNetworkField OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: Bad Network Field"
|
|
::= { rcStatBgp 71 }
|
|
|
|
rcStatBgpTxUpdCodeMalformedASPath OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors transmitted: Malformed AS Path"
|
|
::= { rcStatBgp 72 }
|
|
|
|
rcStatBgpReset OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "reset Bgp global stats"
|
|
DEFVAL {disable}
|
|
::= { rcStatBgp 73 }
|
|
|
|
-- BGP Peer Stats
|
|
|
|
rcStatBgpPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatBgpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store Bgp Peer statistics."
|
|
::= { rcStat 11 }
|
|
|
|
rcStatBgpPeerEntry OBJECT-TYPE
|
|
SYNTAX RcStatBgpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Bgp Peer statistics"
|
|
INDEX { rcStatBgpPeerAddr }
|
|
::= { rcStatBgpPeerTable 1 }
|
|
|
|
RcStatBgpPeerEntry ::= SEQUENCE {
|
|
rcStatBgpPeerAddr IpAddress,
|
|
rcStatBgpPeerStarts Counter32,
|
|
rcStatBgpPeerStops Counter32,
|
|
rcStatBgpPeerOpens Counter32,
|
|
rcStatBgpPeerCloses Counter32,
|
|
rcStatBgpPeerFails Counter32,
|
|
rcStatBgpPeerFatals Counter32,
|
|
rcStatBgpPeerConnExps Counter32,
|
|
rcStatBgpPeerHoldExps Counter32,
|
|
rcStatBgpPeerKeepExps Counter32,
|
|
rcStatBgpPeerTxMsgs Counter32,
|
|
rcStatBgpPeerTxOpens Counter32,
|
|
rcStatBgpPeerTxKeeps Counter32,
|
|
rcStatBgpPeerTxUpdates Counter32,
|
|
rcStatBgpPeerTxNotifys Counter32,
|
|
rcStatBgpPeerRxMsgs Counter32,
|
|
rcStatBgpPeerRxInCompPkts Counter32,
|
|
rcStatBgpPeerRxOpens Counter32,
|
|
rcStatBgpPeerRxKeeps Counter32,
|
|
rcStatBgpPeerRxUpdates Counter32,
|
|
rcStatBgpPeerRxNotifys Counter32,
|
|
rcStatBgpPeerBadEvents Counter32,
|
|
rcStatBgpPeerSyncFails Counter32,
|
|
rcStatBgpPeerRcvdTooShort Counter32,
|
|
rcStatBgpPeerNoMarker Counter32,
|
|
rcStatBgpPeerDropped Counter32,
|
|
rcStatBgpPeerBadMsgTypes Counter32,
|
|
rcStatBgpPeerTrEvent Counter32,
|
|
rcStatBgpPeerTxRoutes Counter32,
|
|
rcStatBgpPeerRxRoutesAdded Counter32,
|
|
rcStatBgpPeerRxRoutesReplaced Counter32,
|
|
rcStatBgpPeerRxNlri Counter32,
|
|
rcStatBgpPeerRxValidUpdates Counter32,
|
|
-- Rx
|
|
rcStatBgpPeerRxECodeHeader Counter32,
|
|
rcStatBgpPeerRxECodeOpen Counter32,
|
|
rcStatBgpPeerRxECodeUpdate Counter32,
|
|
rcStatBgpPeerRxECodeHoldtimer Counter32,
|
|
rcStatBgpPeerRxECodeFSM Counter32,
|
|
rcStatBgpPeerRxECodeCease Counter32,
|
|
rcStatBgpPeerRxHdrCodeNoSync Counter32,
|
|
rcStatBgpPeerRxHdrCodeInvalidMsgLen Counter32,
|
|
rcStatBgpPeerRxHdrCodeInvalidMsgType Counter32,
|
|
rcStatBgpPeerRxOpCodeBadVer Counter32,
|
|
rcStatBgpPeerRxOpCodeBadAs Counter32,
|
|
rcStatBgpPeerRxOpCodeBadRtID Counter32,
|
|
rcStatBgpPeerRxOpCodeUnsuppOption Counter32,
|
|
rcStatBgpPeerRxOpCodeAuthFail Counter32,
|
|
rcStatBgpPeerRxOpCodeBadHold Counter32,
|
|
rcStatBgpPeerRxUpdCodeMalformedAttrList Counter32,
|
|
rcStatBgpPeerRxUpdCodeWelknownAttrUnrecog Counter32,
|
|
rcStatBgpPeerRxUpdCodeWelknownAttrMiss Counter32,
|
|
rcStatBgpPeerRxUpdCodeAttrFlagError Counter32,
|
|
rcStatBgpPeerRxUpdCodeAttrLenError Counter32,
|
|
rcStatBgpPeerRxUpdCodeBadORIGINAttr Counter32,
|
|
rcStatBgpPeerRxUpdCodeASRoutingLoop Counter32,
|
|
rcStatBgpPeerRxUpdCodeBadNHAttr Counter32,
|
|
rcStatBgpPeerRxUpdCodeOptionalAttrError Counter32,
|
|
rcStatBgpPeerRxUpdCodeBadNetworkField Counter32,
|
|
rcStatBgpPeerRxUpdCodeMalformedASPath Counter32,
|
|
-- Tx
|
|
rcStatBgpPeerTxECodeHeader Counter32,
|
|
rcStatBgpPeerTxECodeOpen Counter32,
|
|
rcStatBgpPeerTxECodeUpdate Counter32,
|
|
rcStatBgpPeerTxECodeHoldtimer Counter32,
|
|
rcStatBgpPeerTxECodeFSM Counter32,
|
|
rcStatBgpPeerTxECodeCease Counter32,
|
|
rcStatBgpPeerTxHdrCodeNoSync Counter32,
|
|
rcStatBgpPeerTxHdrCodeInvalidMsgLen Counter32,
|
|
rcStatBgpPeerTxHdrCodeInvalidMsgType Counter32,
|
|
rcStatBgpPeerTxOpCodeBadVer Counter32,
|
|
rcStatBgpPeerTxOpCodeBadAs Counter32,
|
|
rcStatBgpPeerTxOpCodeBadRtID Counter32,
|
|
rcStatBgpPeerTxOpCodeUnsuppOption Counter32,
|
|
rcStatBgpPeerTxOpCodeAuthFail Counter32,
|
|
rcStatBgpPeerTxOpCodeBadHold Counter32,
|
|
rcStatBgpPeerTxUpdCodeMalformedAttrList Counter32,
|
|
rcStatBgpPeerTxUpdCodeWelknownAttrUnrecog Counter32,
|
|
rcStatBgpPeerTxUpdCodeWelknownAttrMiss Counter32,
|
|
rcStatBgpPeerTxUpdCodeAttrFlagError Counter32,
|
|
rcStatBgpPeerTxUpdCodeAttrLenError Counter32,
|
|
rcStatBgpPeerTxUpdCodeBadORIGINAttr Counter32,
|
|
rcStatBgpPeerTxUpdCodeASRoutingLoop Counter32,
|
|
rcStatBgpPeerTxUpdCodeBadNHAttr Counter32,
|
|
rcStatBgpPeerTxUpdCodeOptionalAttrError Counter32,
|
|
rcStatBgpPeerTxUpdCodeBadNetworkField Counter32,
|
|
rcStatBgpPeerTxUpdCodeMalformedASPath Counter32,
|
|
rcStatBgpPeerReset EnableValue
|
|
|
|
}
|
|
|
|
rcStatBgpPeerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcStatBgpPeerEntry 1 }
|
|
|
|
rcStatBgpPeerStarts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer BGP connection started"
|
|
::= { rcStatBgpPeerEntry 2 }
|
|
|
|
rcStatBgpPeerStops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer BGP connection stopped"
|
|
::= { rcStatBgpPeerEntry 3 }
|
|
|
|
rcStatBgpPeerOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer opens TCP"
|
|
::= { rcStatBgpPeerEntry 4 }
|
|
|
|
rcStatBgpPeerCloses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer closes TCP"
|
|
::= { rcStatBgpPeerEntry 5 }
|
|
|
|
rcStatBgpPeerFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer TCP attempts failed"
|
|
::= { rcStatBgpPeerEntry 6 }
|
|
|
|
rcStatBgpPeerFatals OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer TCP crashes due to fatal error"
|
|
::= { rcStatBgpPeerEntry 7 }
|
|
|
|
rcStatBgpPeerConnExps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer TCP retry timer expired"
|
|
::= { rcStatBgpPeerEntry 8 }
|
|
|
|
rcStatBgpPeerHoldExps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer hold timer expired"
|
|
::= { rcStatBgpPeerEntry 9 }
|
|
|
|
rcStatBgpPeerKeepExps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer keepalive timer expired"
|
|
::= { rcStatBgpPeerEntry 10 }
|
|
|
|
rcStatBgpPeerTxMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total messages send by the peer"
|
|
::= { rcStatBgpPeerEntry 11 }
|
|
|
|
rcStatBgpPeerTxOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Opens sent by the peer"
|
|
::= { rcStatBgpPeerEntry 12 }
|
|
|
|
rcStatBgpPeerTxKeeps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Keepalives sent by the peer"
|
|
::= { rcStatBgpPeerEntry 13 }
|
|
|
|
rcStatBgpPeerTxUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Updates sent by the peer"
|
|
::= { rcStatBgpPeerEntry 14 }
|
|
|
|
rcStatBgpPeerTxNotifys OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Notifications sent by the peer"
|
|
::= { rcStatBgpPeerEntry 15 }
|
|
|
|
rcStatBgpPeerRxMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total messages received by the peer"
|
|
::= { rcStatBgpPeerEntry 16 }
|
|
|
|
rcStatBgpPeerRxInCompPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Incomplete message received by the peer"
|
|
::= { rcStatBgpPeerEntry 17 }
|
|
|
|
rcStatBgpPeerRxOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Opens received by the peer"
|
|
::= { rcStatBgpPeerEntry 18 }
|
|
|
|
rcStatBgpPeerRxKeeps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Keepalives received by the peer"
|
|
::= { rcStatBgpPeerEntry 19 }
|
|
|
|
rcStatBgpPeerRxUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Updates received by the peer"
|
|
::= { rcStatBgpPeerEntry 20 }
|
|
|
|
rcStatBgpPeerRxNotifys OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Notifications received by the peer"
|
|
::= { rcStatBgpPeerEntry 21 }
|
|
|
|
rcStatBgpPeerBadEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of invalid events received by the peer"
|
|
::= { rcStatBgpPeerEntry 22 }
|
|
|
|
rcStatBgpPeerSyncFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times FDB sync failed of the peer"
|
|
::= { rcStatBgpPeerEntry 23 }
|
|
|
|
rcStatBgpPeerRcvdTooShort OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of messages recieved by the peer that is too sho
|
|
rt"
|
|
::= { rcStatBgpPeerEntry 24 }
|
|
|
|
rcStatBgpPeerNoMarker OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of messages without marker recieved by the peer"
|
|
::= { rcStatBgpPeerEntry 25 }
|
|
|
|
rcStatBgpPeerDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of messages the peer has dropped"
|
|
::= { rcStatBgpPeerEntry 26 }
|
|
|
|
rcStatBgpPeerBadMsgTypes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of messages with invalid message type"
|
|
::= { rcStatBgpPeerEntry 27 }
|
|
|
|
rcStatBgpPeerTrEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Peer trace event"
|
|
::= { rcStatBgpPeerEntry 28 }
|
|
|
|
rcStatBgpPeerTxRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of NLRI sent by peer"
|
|
::= { rcStatBgpPeerEntry 29 }
|
|
|
|
rcStatBgpPeerRxRoutesAdded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of routes added into loc_rib by this peer"
|
|
::= { rcStatBgpPeerEntry 30 }
|
|
|
|
rcStatBgpPeerRxRoutesReplaced OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of routes replaced by the routes received by the
|
|
peer"
|
|
::= { rcStatBgpPeerEntry 31 }
|
|
|
|
rcStatBgpPeerRxNlri OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of NLRI received by the peer"
|
|
::= { rcStatBgpPeerEntry 32 }
|
|
|
|
rcStatBgpPeerRxValidUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of valid UPDATEs received by the peer"
|
|
::= { rcStatBgpPeerEntry 33 }
|
|
|
|
rcStatBgpPeerRxECodeHeader OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Header"
|
|
::= { rcStatBgpPeerEntry 34 }
|
|
|
|
rcStatBgpPeerRxECodeOpen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Open"
|
|
::= { rcStatBgpPeerEntry 35 }
|
|
|
|
rcStatBgpPeerRxECodeUpdate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Update"
|
|
::= { rcStatBgpPeerEntry 36 }
|
|
|
|
rcStatBgpPeerRxECodeHoldtimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Hold"
|
|
::= { rcStatBgpPeerEntry 37 }
|
|
|
|
rcStatBgpPeerRxECodeFSM OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Fsm"
|
|
::= { rcStatBgpPeerEntry 38 }
|
|
|
|
rcStatBgpPeerRxECodeCease OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Cease"
|
|
::= { rcStatBgpPeerEntry 39 }
|
|
|
|
rcStatBgpPeerRxHdrCodeNoSync OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Not Synchronized"
|
|
::= { rcStatBgpPeerEntry 40 }
|
|
|
|
rcStatBgpPeerRxHdrCodeInvalidMsgLen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Invalid message length"
|
|
::= { rcStatBgpPeerEntry 41 }
|
|
|
|
rcStatBgpPeerRxHdrCodeInvalidMsgType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Invalid message type"
|
|
::= { rcStatBgpPeerEntry 42 }
|
|
|
|
rcStatBgpPeerRxOpCodeBadVer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad Version"
|
|
::= { rcStatBgpPeerEntry 43 }
|
|
|
|
rcStatBgpPeerRxOpCodeBadAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad AS number"
|
|
::= { rcStatBgpPeerEntry 44 }
|
|
|
|
rcStatBgpPeerRxOpCodeBadRtID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad BGP ID"
|
|
::= { rcStatBgpPeerEntry 45 }
|
|
|
|
rcStatBgpPeerRxOpCodeUnsuppOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Unsupported Options"
|
|
::= { rcStatBgpPeerEntry 46 }
|
|
|
|
rcStatBgpPeerRxOpCodeAuthFail OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Authorization failures"
|
|
::= { rcStatBgpPeerEntry 47 }
|
|
|
|
rcStatBgpPeerRxOpCodeBadHold OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad Hold value"
|
|
::= { rcStatBgpPeerEntry 48 }
|
|
|
|
rcStatBgpPeerRxUpdCodeMalformedAttrList OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 49 }
|
|
|
|
rcStatBgpPeerRxUpdCodeWelknownAttrUnrecog OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 50 }
|
|
|
|
rcStatBgpPeerRxUpdCodeWelknownAttrMiss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 51 }
|
|
|
|
rcStatBgpPeerRxUpdCodeAttrFlagError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 52 }
|
|
|
|
rcStatBgpPeerRxUpdCodeAttrLenError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 53 }
|
|
|
|
rcStatBgpPeerRxUpdCodeBadORIGINAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 54 }
|
|
|
|
rcStatBgpPeerRxUpdCodeASRoutingLoop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 55 }
|
|
|
|
rcStatBgpPeerRxUpdCodeBadNHAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 56 }
|
|
|
|
rcStatBgpPeerRxUpdCodeOptionalAttrError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 57 }
|
|
|
|
rcStatBgpPeerRxUpdCodeBadNetworkField OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 58 }
|
|
|
|
rcStatBgpPeerRxUpdCodeMalformedASPath OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 59 }
|
|
|
|
rcStatBgpPeerTxECodeHeader OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Header"
|
|
::= { rcStatBgpPeerEntry 60 }
|
|
|
|
rcStatBgpPeerTxECodeOpen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Open"
|
|
::= { rcStatBgpPeerEntry 61 }
|
|
|
|
rcStatBgpPeerTxECodeUpdate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Update"
|
|
::= { rcStatBgpPeerEntry 62 }
|
|
|
|
rcStatBgpPeerTxECodeHoldtimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Hold"
|
|
::= { rcStatBgpPeerEntry 63 }
|
|
|
|
rcStatBgpPeerTxECodeFSM OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Fsm"
|
|
::= { rcStatBgpPeerEntry 64 }
|
|
|
|
rcStatBgpPeerTxECodeCease OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Cease"
|
|
::= { rcStatBgpPeerEntry 65 }
|
|
|
|
rcStatBgpPeerTxHdrCodeNoSync OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Not Synchronized"
|
|
::= { rcStatBgpPeerEntry 66 }
|
|
|
|
rcStatBgpPeerTxHdrCodeInvalidMsgLen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Invalid message length"
|
|
::= { rcStatBgpPeerEntry 67 }
|
|
|
|
rcStatBgpPeerTxHdrCodeInvalidMsgType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Invalid message type"
|
|
::= { rcStatBgpPeerEntry 68 }
|
|
|
|
rcStatBgpPeerTxOpCodeBadVer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad Version"
|
|
::= { rcStatBgpPeerEntry 69 }
|
|
|
|
rcStatBgpPeerTxOpCodeBadAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad AS number"
|
|
::= { rcStatBgpPeerEntry 70 }
|
|
|
|
rcStatBgpPeerTxOpCodeBadRtID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad BGP ID"
|
|
::= { rcStatBgpPeerEntry 71 }
|
|
|
|
rcStatBgpPeerTxOpCodeUnsuppOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Unsupported Options"
|
|
::= { rcStatBgpPeerEntry 72 }
|
|
|
|
rcStatBgpPeerTxOpCodeAuthFail OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Authorization failures"
|
|
::= { rcStatBgpPeerEntry 73 }
|
|
|
|
rcStatBgpPeerTxOpCodeBadHold OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad Hold value"
|
|
::= { rcStatBgpPeerEntry 74 }
|
|
|
|
rcStatBgpPeerTxUpdCodeMalformedAttrList OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 75 }
|
|
|
|
rcStatBgpPeerTxUpdCodeWelknownAttrUnrecog OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 76 }
|
|
|
|
rcStatBgpPeerTxUpdCodeWelknownAttrMiss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 77 }
|
|
|
|
rcStatBgpPeerTxUpdCodeAttrFlagError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 78 }
|
|
|
|
rcStatBgpPeerTxUpdCodeAttrLenError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 79 }
|
|
|
|
rcStatBgpPeerTxUpdCodeBadORIGINAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 80 }
|
|
|
|
rcStatBgpPeerTxUpdCodeASRoutingLoop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 81 }
|
|
|
|
rcStatBgpPeerTxUpdCodeBadNHAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 82 }
|
|
|
|
rcStatBgpPeerTxUpdCodeOptionalAttrError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 83 }
|
|
|
|
rcStatBgpPeerTxUpdCodeBadNetworkField OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 84 }
|
|
|
|
rcStatBgpPeerTxUpdCodeMalformedASPath OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerEntry 85 }
|
|
|
|
rcStatBgpPeerReset OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "reset peer stats"
|
|
DEFVAL {disable}
|
|
::= { rcStatBgpPeerEntry 86 }
|
|
|
|
-- Address Family Independent BGP Peer Stats
|
|
|
|
rcStatBgpPeerAfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStatBgpPeerAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store v4/v6 Bgp Peer statistics."
|
|
::= { rcStat 13 }
|
|
|
|
rcStatBgpPeerAfEntry OBJECT-TYPE
|
|
SYNTAX RcStatBgpPeerAfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "AF independent Bgp Peer statistics"
|
|
INDEX { rcStatBgpPeerAfAddrType,
|
|
rcStatBgpPeerAfAddr }
|
|
::= { rcStatBgpPeerAfTable 1 }
|
|
|
|
RcStatBgpPeerAfEntry ::= SEQUENCE {
|
|
rcStatBgpPeerAfAddrType InetAddressType,
|
|
rcStatBgpPeerAfAddr InetAddress,
|
|
rcStatBgpPeerAfStarts Counter32,
|
|
rcStatBgpPeerAfStops Counter32,
|
|
rcStatBgpPeerAfOpens Counter32,
|
|
rcStatBgpPeerAfCloses Counter32,
|
|
rcStatBgpPeerAfFails Counter32,
|
|
rcStatBgpPeerAfFatals Counter32,
|
|
rcStatBgpPeerAfConnExps Counter32,
|
|
rcStatBgpPeerAfHoldExps Counter32,
|
|
rcStatBgpPeerAfKeepExps Counter32,
|
|
rcStatBgpPeerAfTxMsgs Counter32,
|
|
rcStatBgpPeerAfTxOpens Counter32,
|
|
rcStatBgpPeerAfTxKeeps Counter32,
|
|
rcStatBgpPeerAfTxUpdates Counter32,
|
|
rcStatBgpPeerAfTxNotifys Counter32,
|
|
rcStatBgpPeerAfRxMsgs Counter32,
|
|
rcStatBgpPeerAfRxInCompPkts Counter32,
|
|
rcStatBgpPeerAfRxOpens Counter32,
|
|
rcStatBgpPeerAfRxKeeps Counter32,
|
|
rcStatBgpPeerAfRxUpdates Counter32,
|
|
rcStatBgpPeerAfRxNotifys Counter32,
|
|
rcStatBgpPeerAfBadEvents Counter32,
|
|
rcStatBgpPeerAfSyncFails Counter32,
|
|
rcStatBgpPeerAfRcvdTooShort Counter32,
|
|
rcStatBgpPeerAfNoMarker Counter32,
|
|
rcStatBgpPeerAfDropped Counter32,
|
|
rcStatBgpPeerAfBadMsgTypes Counter32,
|
|
rcStatBgpPeerAfTrEvent Counter32,
|
|
rcStatBgpPeerAfTxRoutes Counter32,
|
|
rcStatBgpPeerAfRxRoutesAdded Counter32,
|
|
rcStatBgpPeerAfRxRoutesReplaced Counter32,
|
|
rcStatBgpPeerAfRxNlri Counter32,
|
|
rcStatBgpPeerAfRxValidUpdates Counter32,
|
|
-- Rx
|
|
rcStatBgpPeerAfRxECodeHeader Counter32,
|
|
rcStatBgpPeerAfRxECodeOpen Counter32,
|
|
rcStatBgpPeerAfRxECodeUpdate Counter32,
|
|
rcStatBgpPeerAfRxECodeHoldtimer Counter32,
|
|
rcStatBgpPeerAfRxECodeFSM Counter32,
|
|
rcStatBgpPeerAfRxECodeCease Counter32,
|
|
rcStatBgpPeerAfRxHdrCodeNoSync Counter32,
|
|
rcStatBgpPeerAfRxHdrCodeInvalidMsgLen Counter32,
|
|
rcStatBgpPeerAfRxHdrCodeInvalidMsgType Counter32,
|
|
rcStatBgpPeerAfRxOpCodeBadVer Counter32,
|
|
rcStatBgpPeerAfRxOpCodeBadAs Counter32,
|
|
rcStatBgpPeerAfRxOpCodeBadRtID Counter32,
|
|
rcStatBgpPeerAfRxOpCodeUnsuppOption Counter32,
|
|
rcStatBgpPeerAfRxOpCodeAuthFail Counter32,
|
|
rcStatBgpPeerAfRxOpCodeBadHold Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeMalformedAttrList Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeWelknownAttrUnrecog Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeWelknownAttrMiss Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeAttrFlagError Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeAttrLenError Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeBadORIGINAttr Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeASRoutingLoop Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeBadNHAttr Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeOptionalAttrError Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeBadNetworkField Counter32,
|
|
rcStatBgpPeerAfRxUpdCodeMalformedASPath Counter32,
|
|
-- Tx
|
|
rcStatBgpPeerAfTxECodeHeader Counter32,
|
|
rcStatBgpPeerAfTxECodeOpen Counter32,
|
|
rcStatBgpPeerAfTxECodeUpdate Counter32,
|
|
rcStatBgpPeerAfTxECodeHoldtimer Counter32,
|
|
rcStatBgpPeerAfTxECodeFSM Counter32,
|
|
rcStatBgpPeerAfTxECodeCease Counter32,
|
|
rcStatBgpPeerAfTxHdrCodeNoSync Counter32,
|
|
rcStatBgpPeerAfTxHdrCodeInvalidMsgLen Counter32,
|
|
rcStatBgpPeerAfTxHdrCodeInvalidMsgType Counter32,
|
|
rcStatBgpPeerAfTxOpCodeBadVer Counter32,
|
|
rcStatBgpPeerAfTxOpCodeBadAs Counter32,
|
|
rcStatBgpPeerAfTxOpCodeBadRtID Counter32,
|
|
rcStatBgpPeerAfTxOpCodeUnsuppOption Counter32,
|
|
rcStatBgpPeerAfTxOpCodeAuthFail Counter32,
|
|
rcStatBgpPeerAfTxOpCodeBadHold Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeMalformedAttrList Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeWelknownAttrUnrecog Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeWelknownAttrMiss Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeAttrFlagError Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeAttrLenError Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeBadORIGINAttr Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeASRoutingLoop Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeBadNHAttr Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeOptionalAttrError Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeBadNetworkField Counter32,
|
|
rcStatBgpPeerAfTxUpdCodeMalformedASPath Counter32,
|
|
rcStatBgpPeerAfReset TruthValue
|
|
|
|
}
|
|
|
|
rcStatBgpPeerAfAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inet address type of the AF independent peer"
|
|
::= { rcStatBgpPeerAfEntry 1 }
|
|
|
|
rcStatBgpPeerAfAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inet address of the AF independent peer"
|
|
::= { rcStatBgpPeerAfEntry 2 }
|
|
|
|
rcStatBgpPeerAfStarts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer BGP connection started"
|
|
::= { rcStatBgpPeerAfEntry 3 }
|
|
|
|
rcStatBgpPeerAfStops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer BGP connection stopped"
|
|
::= { rcStatBgpPeerAfEntry 4 }
|
|
|
|
rcStatBgpPeerAfOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer opens TCP"
|
|
::= { rcStatBgpPeerAfEntry 5 }
|
|
|
|
rcStatBgpPeerAfCloses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer closes TCP"
|
|
::= { rcStatBgpPeerAfEntry 6 }
|
|
|
|
rcStatBgpPeerAfFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer TCP attempts failed"
|
|
::= { rcStatBgpPeerAfEntry 7 }
|
|
|
|
rcStatBgpPeerAfFatals OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer TCP crashes due to fatal error"
|
|
::= { rcStatBgpPeerAfEntry 8 }
|
|
|
|
rcStatBgpPeerAfConnExps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer TCP retry timer expired"
|
|
::= { rcStatBgpPeerAfEntry 9 }
|
|
|
|
rcStatBgpPeerAfHoldExps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer hold timer expired"
|
|
::= { rcStatBgpPeerAfEntry 10 }
|
|
|
|
rcStatBgpPeerAfKeepExps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times peer keepalive timer expired"
|
|
::= { rcStatBgpPeerAfEntry 11 }
|
|
rcStatBgpPeerAfTxMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total messages send by the peer"
|
|
::= { rcStatBgpPeerAfEntry 12 }
|
|
|
|
rcStatBgpPeerAfTxOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Opens sent by the peer"
|
|
::= { rcStatBgpPeerAfEntry 13 }
|
|
|
|
rcStatBgpPeerAfTxKeeps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Keepalives sent by the peer"
|
|
::= { rcStatBgpPeerAfEntry 14 }
|
|
|
|
rcStatBgpPeerAfTxUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Updates sent by the peer"
|
|
::= { rcStatBgpPeerAfEntry 15 }
|
|
|
|
rcStatBgpPeerAfTxNotifys OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Notifications sent by the peer"
|
|
::= { rcStatBgpPeerAfEntry 16 }
|
|
|
|
rcStatBgpPeerAfRxMsgs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total messages received by the peer"
|
|
::= { rcStatBgpPeerAfEntry 17 }
|
|
|
|
rcStatBgpPeerAfRxInCompPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Incomplete message received by the peer"
|
|
::= { rcStatBgpPeerAfEntry 18 }
|
|
|
|
rcStatBgpPeerAfRxOpens OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Opens received by the peer"
|
|
::= { rcStatBgpPeerAfEntry 19 }
|
|
|
|
rcStatBgpPeerAfRxKeeps OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Keepalives received by the peer"
|
|
::= { rcStatBgpPeerAfEntry 20 }
|
|
|
|
rcStatBgpPeerAfRxUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Updates received by the peer"
|
|
::= { rcStatBgpPeerAfEntry 21 }
|
|
|
|
rcStatBgpPeerAfRxNotifys OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Notifications received by the peer"
|
|
::= { rcStatBgpPeerAfEntry 22 }
|
|
|
|
rcStatBgpPeerAfBadEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of invalid events received by the peer"
|
|
::= { rcStatBgpPeerAfEntry 23 }
|
|
|
|
rcStatBgpPeerAfSyncFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of times FDB sync failed of the peer"
|
|
::= { rcStatBgpPeerAfEntry 24 }
|
|
|
|
rcStatBgpPeerAfRcvdTooShort OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of messages recieved by the peer that is too sho
|
|
rt"
|
|
::= { rcStatBgpPeerAfEntry 25 }
|
|
|
|
rcStatBgpPeerAfNoMarker OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of messages without marker recieved by the peer"
|
|
::= { rcStatBgpPeerAfEntry 26 }
|
|
|
|
rcStatBgpPeerAfDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of messages the peer has dropped"
|
|
::= { rcStatBgpPeerAfEntry 27 }
|
|
|
|
rcStatBgpPeerAfBadMsgTypes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of messages with invalid message type"
|
|
::= { rcStatBgpPeerAfEntry 28 }
|
|
|
|
rcStatBgpPeerAfTrEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Peer trace event"
|
|
::= { rcStatBgpPeerAfEntry 29 }
|
|
|
|
rcStatBgpPeerAfTxRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of NLRI sent by peer"
|
|
::= { rcStatBgpPeerAfEntry 30 }
|
|
|
|
rcStatBgpPeerAfRxRoutesAdded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of routes added into loc_rib by this peer"
|
|
::= { rcStatBgpPeerAfEntry 31 }
|
|
|
|
rcStatBgpPeerAfRxRoutesReplaced OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of routes replaced by the routes received by the
|
|
peer"
|
|
::= { rcStatBgpPeerAfEntry 32 }
|
|
|
|
rcStatBgpPeerAfRxNlri OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of NLRI received by the peer"
|
|
::= { rcStatBgpPeerAfEntry 33 }
|
|
|
|
rcStatBgpPeerAfRxValidUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of valid UPDATEs received by the peer"
|
|
::= { rcStatBgpPeerAfEntry 34 }
|
|
|
|
rcStatBgpPeerAfRxECodeHeader OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Header"
|
|
::= { rcStatBgpPeerAfEntry 35 }
|
|
|
|
rcStatBgpPeerAfRxECodeOpen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Open"
|
|
::= { rcStatBgpPeerAfEntry 36 }
|
|
|
|
rcStatBgpPeerAfRxECodeUpdate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Update"
|
|
::= { rcStatBgpPeerAfEntry 37 }
|
|
|
|
rcStatBgpPeerAfRxECodeHoldtimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Hold"
|
|
::= { rcStatBgpPeerAfEntry 38 }
|
|
|
|
rcStatBgpPeerAfRxECodeFSM OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Fsm"
|
|
::= { rcStatBgpPeerAfEntry 39 }
|
|
|
|
rcStatBgpPeerAfRxECodeCease OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Cease"
|
|
::= { rcStatBgpPeerAfEntry 40 }
|
|
|
|
rcStatBgpPeerAfRxHdrCodeNoSync OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Not Synchronized"
|
|
::= { rcStatBgpPeerAfEntry 41 }
|
|
|
|
rcStatBgpPeerAfRxHdrCodeInvalidMsgLen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Invalid message length"
|
|
::= { rcStatBgpPeerAfEntry 42 }
|
|
|
|
rcStatBgpPeerAfRxHdrCodeInvalidMsgType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Invalid message type"
|
|
::= { rcStatBgpPeerAfEntry 43 }
|
|
|
|
rcStatBgpPeerAfRxOpCodeBadVer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad Version"
|
|
::= { rcStatBgpPeerAfEntry 44 }
|
|
|
|
rcStatBgpPeerAfRxOpCodeBadAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad AS number"
|
|
::= { rcStatBgpPeerAfEntry 45 }
|
|
|
|
rcStatBgpPeerAfRxOpCodeBadRtID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad BGP ID"
|
|
::= { rcStatBgpPeerAfEntry 46 }
|
|
|
|
rcStatBgpPeerAfRxOpCodeUnsuppOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Unsupported Options"
|
|
::= { rcStatBgpPeerAfEntry 47 }
|
|
|
|
rcStatBgpPeerAfRxOpCodeAuthFail OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Authorization failures"
|
|
::= { rcStatBgpPeerAfEntry 48 }
|
|
|
|
rcStatBgpPeerAfRxOpCodeBadHold OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad Hold value"
|
|
::= { rcStatBgpPeerAfEntry 49 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeMalformedAttrList OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 50 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeWelknownAttrUnrecog OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 51 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeWelknownAttrMiss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 52 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeAttrFlagError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 53 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeAttrLenError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 54 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeBadORIGINAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 55 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeASRoutingLoop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 56 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeBadNHAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 57 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeOptionalAttrError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 58 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeBadNetworkField OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 59 }
|
|
|
|
rcStatBgpPeerAfRxUpdCodeMalformedASPath OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 60 }
|
|
|
|
rcStatBgpPeerAfTxECodeHeader OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Header"
|
|
::= { rcStatBgpPeerAfEntry 61 }
|
|
|
|
rcStatBgpPeerAfTxECodeOpen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Open"
|
|
::= { rcStatBgpPeerAfEntry 62 }
|
|
|
|
rcStatBgpPeerAfTxECodeUpdate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Update"
|
|
::= { rcStatBgpPeerAfEntry 63 }
|
|
|
|
rcStatBgpPeerAfTxECodeHoldtimer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Hold"
|
|
::= { rcStatBgpPeerAfEntry 64 }
|
|
|
|
rcStatBgpPeerAfTxECodeFSM OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Fsm"
|
|
::= { rcStatBgpPeerAfEntry 65 }
|
|
|
|
rcStatBgpPeerAfTxECodeCease OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total errors peer received: Cease"
|
|
::= { rcStatBgpPeerAfEntry 66 }
|
|
|
|
rcStatBgpPeerAfTxHdrCodeNoSync OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Not Synchronized"
|
|
::= { rcStatBgpPeerAfEntry 67 }
|
|
|
|
rcStatBgpPeerAfTxHdrCodeInvalidMsgLen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Invalid message length"
|
|
::= { rcStatBgpPeerAfEntry 68 }
|
|
|
|
rcStatBgpPeerAfTxHdrCodeInvalidMsgType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Header errors peer received: Invalid message type"
|
|
::= { rcStatBgpPeerAfEntry 69 }
|
|
|
|
rcStatBgpPeerAfTxOpCodeBadVer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad Version"
|
|
::= { rcStatBgpPeerAfEntry 70 }
|
|
|
|
rcStatBgpPeerAfTxOpCodeBadAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad AS number"
|
|
::= { rcStatBgpPeerAfEntry 71 }
|
|
|
|
rcStatBgpPeerAfTxOpCodeBadRtID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad BGP ID"
|
|
::= { rcStatBgpPeerAfEntry 72 }
|
|
|
|
rcStatBgpPeerAfTxOpCodeUnsuppOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Unsupported Options"
|
|
::= { rcStatBgpPeerAfEntry 73 }
|
|
|
|
rcStatBgpPeerAfTxOpCodeAuthFail OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Authorization failures"
|
|
::= { rcStatBgpPeerAfEntry 74 }
|
|
|
|
rcStatBgpPeerAfTxOpCodeBadHold OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Open errors peer received: Bad Hold value"
|
|
::= { rcStatBgpPeerAfEntry 75 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeMalformedAttrList OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 76 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeWelknownAttrUnrecog OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 77 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeWelknownAttrMiss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 78 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeAttrFlagError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 79 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeAttrLenError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 80 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeBadORIGINAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 81 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeASRoutingLoop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 82 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeBadNHAttr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 83 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeOptionalAttrError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 84 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeBadNetworkField OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 85 }
|
|
|
|
rcStatBgpPeerAfTxUpdCodeMalformedASPath OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update errors peer received: Malformed Attr List"
|
|
::= { rcStatBgpPeerAfEntry 86 }
|
|
|
|
rcStatBgpPeerAfReset OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "reset peer stats"
|
|
DEFVAL {false}
|
|
::= { rcStatBgpPeerAfEntry 87 }
|
|
|
|
-- end of Statistics
|
|
|
|
-- Spanning Tree Group (STG)
|
|
|
|
rcStgMaxStgs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The maximum number of spanning tree groups this
|
|
device can support concurrently."
|
|
::= { rcStg 1 }
|
|
|
|
rcStgNumStgs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of spanning tree groups that are
|
|
currently defined."
|
|
::= { rcStg 2 }
|
|
|
|
rcStgUnassignedPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A bitfield used to identify which ports in
|
|
the system currently not assigned to any STG.
|
|
|
|
The bitfield is 32 octets long representing
|
|
ports 0 to 255 (inclusive)."
|
|
::= { rcStg 3 }
|
|
|
|
|
|
-- STG Table
|
|
|
|
rcStgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store Spanning Tree Group (STG)
|
|
information. Each row in the table specifies
|
|
a different STG in the device."
|
|
::= { rcStg 4 }
|
|
|
|
rcStgEntry OBJECT-TYPE
|
|
SYNTAX RcStgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "STG attributes"
|
|
INDEX { rcStgId }
|
|
::= { rcStgTable 1 }
|
|
|
|
RcStgEntry ::= SEQUENCE {
|
|
rcStgId INTEGER,
|
|
rcStgTaggedBpduAddress MacAddress,
|
|
rcStgTaggedBpduVlanId Integer32,
|
|
rcStgBridgeAddress MacAddress,
|
|
rcStgNumPorts Integer32,
|
|
rcStgProtocolSpecification INTEGER,
|
|
rcStgPriority INTEGER,
|
|
rcStgTimeSinceTopologyChange TimeTicks,
|
|
rcStgTopChanges Counter32,
|
|
rcStgDesignatedRoot BridgeId,
|
|
rcStgRootCost Integer32,
|
|
rcStgRootPort InterfaceIndex,
|
|
rcStgMaxAge Timeout,
|
|
rcStgHelloTime Timeout,
|
|
rcStgHoldTime Integer32,
|
|
rcStgForwardDelay Timeout,
|
|
rcStgBridgeMaxAge Timeout,
|
|
rcStgBridgeHelloTime Timeout,
|
|
rcStgBridgeForwardDelay Timeout,
|
|
rcStgEnableStp TruthValue,
|
|
rcStgStpTrapEnable TruthValue,
|
|
rcStgPortMembers OCTET STRING,
|
|
rcStgRowStatus RowStatus,
|
|
rcStgPortStpState OCTET STRING,
|
|
rcStgType INTEGER,
|
|
rcStgNtStgEnable TruthValue,
|
|
rcStgLPortMembers LPortSet
|
|
}
|
|
|
|
rcStgId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An identifier used to identify a STG in the device."
|
|
::= { rcStgEntry 1 }
|
|
|
|
rcStgTaggedBpduAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The MAC address to be assigned to the destination
|
|
mac address field in tagged BPDUs.
|
|
|
|
The default address is the well known multicast
|
|
group address 01-80-c2-00-00-00."
|
|
DEFVAL { "01:80:c2:00:00:00" }
|
|
::= { rcStgEntry 2 }
|
|
|
|
rcStgTaggedBpduVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VLAN ID to be used for tagging BPDUs."
|
|
::= { rcStgEntry 3 }
|
|
|
|
rcStgBridgeAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address used by this bridge when it must
|
|
be referred to in a unique fashion. It is
|
|
recommended that this be the numerically smallest
|
|
MAC address of all ports that belong to this
|
|
bridge. However it is only required to be unique.
|
|
When concatenated with rcStgPriority a unique
|
|
BridgeIdentifier is formed which is used in the
|
|
Spanning Tree Protocol."
|
|
REFERENCE "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5"
|
|
::= { rcStgEntry 4 }
|
|
|
|
rcStgNumPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of ports controlled by this bridging entity."
|
|
REFERENCE "IEEE 802.1D-1990: Section 6.4.1.1.3"
|
|
::= { rcStgEntry 5 }
|
|
|
|
rcStgProtocolSpecification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
decLb100(2),
|
|
ieee8021d(3),
|
|
pvst(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An indication of what version of the Spanning
|
|
Tree Protocol is being run. The value
|
|
'decLb100(2)' indicates the DEC LANbridge 100
|
|
Spanning Tree protocol. IEEE 802.1d
|
|
implementations will return 'ieee8021d(3)'. If
|
|
future versions of the IEEE Spanning Tree Protocol
|
|
are released that are incompatible with the
|
|
current version a new value will be defined."
|
|
::= { rcStgEntry 6 }
|
|
|
|
rcStgPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value of the write-able portion of the Bridge
|
|
ID, i.e., the first two octets of the (8 octet
|
|
long) Bridge ID. The other (last) 6 octets of the
|
|
Bridge ID are given by the value of rcStgBridgeAddress."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.7"
|
|
DEFVAL { 32768 }
|
|
::= { rcStgEntry 7 }
|
|
|
|
rcStgTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time (in hundredths of a second) since the
|
|
last time a topology change was detected by the
|
|
bridge entity."
|
|
REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { rcStgEntry 8 }
|
|
|
|
rcStgTopChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of topology changes detected by
|
|
this bridge since the management entity was last
|
|
reset or initialized."
|
|
REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { rcStgEntry 9 }
|
|
|
|
rcStgDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bridge identifier of the root of the spanning
|
|
tree as determined by the Spanning Tree Protocol
|
|
as executed by this node. This value is used as
|
|
the Root Identifier parameter in all Configuration
|
|
Bridge PDUs originated by this node."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.1"
|
|
::= { rcStgEntry 10 }
|
|
|
|
rcStgRootCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The cost of the path to the root as seen from
|
|
this bridge."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.2"
|
|
::= { rcStgEntry 11 }
|
|
|
|
rcStgRootPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port number of the port which offers the
|
|
lowest cost path from this bridge to the root
|
|
bridge."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.3"
|
|
::= { rcStgEntry 12 }
|
|
|
|
rcStgMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum age of Spanning Tree Protocol
|
|
information learned from the network on any port
|
|
before it is discarded, in units of hundredths of
|
|
a second. This is the actual value that this
|
|
bridge is currently using."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.4"
|
|
::= { rcStgEntry 13 }
|
|
|
|
rcStgHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The amount of time between the transmission of
|
|
Configuration bridge PDUs by this node on any port
|
|
when it is the root of the spanning tree or trying
|
|
to become so, in units of hundredths of a second.
|
|
This is the actual value that this bridge is
|
|
currently using."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5"
|
|
::= { rcStgEntry 14 }
|
|
|
|
rcStgHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This time value determines the interval length
|
|
during which no more than two Configuration bridge
|
|
PDUs shall be transmitted by this node, in units
|
|
of hundredths of a second."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.14"
|
|
::= { rcStgEntry 15 }
|
|
|
|
rcStgForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This time value, measured in units of hundredths
|
|
of a second, controls how fast a port changes its
|
|
spanning state when moving towards the Forwarding
|
|
state. The value determines how long the port
|
|
stays in each of the Listening and Learning
|
|
states, which precede the Forwarding state. This
|
|
value is also used, when a topology change has
|
|
been detected and is underway, to age all dynamic
|
|
entries in the Forwarding Database. [Note that
|
|
this value is the one that this bridge is
|
|
currently using, in contrast to
|
|
rcStgBridgeForwardDelay which is the value that
|
|
this bridge and all others would start using
|
|
if/when this bridge were to become the root.]"
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6"
|
|
::= { rcStgEntry 16 }
|
|
|
|
rcStgBridgeMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout (600..4000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value that all bridges use for MaxAge when
|
|
this bridge is acting as the root. Note that
|
|
802.1D-1990 specifies that the range for this
|
|
parameter is related to the value of
|
|
rcStgBridgeHelloTime. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.8"
|
|
DEFVAL { 2000 }
|
|
::= { rcStgEntry 17 }
|
|
|
|
rcStgBridgeHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout (100..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value that all bridges use for HelloTime when
|
|
this bridge is acting as the root. The
|
|
granularity of this timer is specified by 802.1D-
|
|
1990 to be 1 second. An agent may return a
|
|
badValue error if a set is attempted to a value
|
|
which is not a whole number of seconds."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.9"
|
|
DEFVAL { 200 }
|
|
::= { rcStgEntry 18 }
|
|
|
|
rcStgBridgeForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout (400..3000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value that all bridges use for ForwardDelay
|
|
when this bridge is acting as the root. Note that
|
|
802.1D-1990 specifies that the range for this
|
|
parameter is related to the value of
|
|
rcStgBridgeMaxAge. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10"
|
|
DEFVAL { 1500 }
|
|
::= { rcStgEntry 19 }
|
|
|
|
rcStgEnableStp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether the spanning tree protocol
|
|
should be active in this STG."
|
|
DEFVAL { true }
|
|
::= { rcStgEntry 20 }
|
|
|
|
rcStgStpTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether traps relating to the spanning
|
|
tree protocol should be sent for this STG."
|
|
DEFVAL { true }
|
|
::= { rcStgEntry 21 }
|
|
|
|
rcStgPortMembers OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..104))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A bitfield used to identify which ports in
|
|
the system are members this STG.
|
|
|
|
The bitfield is 104 octets long representing
|
|
ports 64 (1/1) to 831 (12/68) (inclusive)."
|
|
::= { rcStgEntry 22 }
|
|
|
|
rcStgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status."
|
|
::= { rcStgEntry 23 }
|
|
|
|
rcStgPortStpState OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(208))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Every 2 bitfields used to identify a port state
|
|
in this STG. Port state is cataloged as non-stp(0),
|
|
blocking(1), learning(2), and forwarding(3)."
|
|
::= { rcStgEntry 24 }
|
|
|
|
rcStgType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
svlan(2),
|
|
pbt(3),
|
|
plsb(6),
|
|
spbm(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of Stg."
|
|
DEFVAL { normal }
|
|
::= { rcStgEntry 25 }
|
|
|
|
rcStgNtStgEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether this STG is Operating in
|
|
Nortel Mode or in Cisco Mode.
|
|
true = Nortel Mode
|
|
false = Cisco Mode."
|
|
DEFVAL { true }
|
|
::= { rcStgEntry 26 }
|
|
|
|
rcStgLPortMembers OBJECT-TYPE
|
|
SYNTAX LPortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A bitfield used to identify which logical ports
|
|
(for example, WLAN tunnels) in the system are members
|
|
of this STG. The bitfield is 256 octets long
|
|
representing ports 704 to 2752 (inclusive)."
|
|
::= { rcStgEntry 27 }
|
|
|
|
|
|
-- STG Port Table
|
|
|
|
rcStgPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcStgPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store Spanning Tree Group (STG)
|
|
port related information. If a port is
|
|
associated with more than one STGs, the port
|
|
will have one entry in this table for each STG
|
|
it assigned to."
|
|
::= { rcStg 5 }
|
|
|
|
rcStgPortEntry OBJECT-TYPE
|
|
SYNTAX RcStgPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "STG Port attributes"
|
|
INDEX { rcStgPort, rcStgPortStgId }
|
|
::= { rcStgPortTable 1 }
|
|
|
|
RcStgPortEntry ::= SEQUENCE {
|
|
rcStgPort InterfaceIndex,
|
|
rcStgPortStgId INTEGER,
|
|
rcStgPortPriority INTEGER,
|
|
rcStgPortState INTEGER,
|
|
rcStgPortEnableStp TruthValue,
|
|
rcStgPortFastStart TruthValue,
|
|
rcStgPortPathCost INTEGER,
|
|
rcStgPortDesignatedRoot BridgeId,
|
|
rcStgPortDesignatedCost Integer32,
|
|
rcStgPortDesignatedBridge BridgeId,
|
|
rcStgPortDesignatedPort OCTET STRING,
|
|
rcStgPortForwardTransitions Counter32,
|
|
rcStgPortInConfigBpdus Counter32,
|
|
rcStgPortInTcnBpdus Counter32,
|
|
rcStgPortInBadBpdus Counter32,
|
|
rcStgPortOutConfigBpdus Counter32,
|
|
rcStgPortOutTcnBpdus Counter32,
|
|
rcStgPortRowStatus RowStatus,
|
|
rcStgPortChangeDetection TruthValue,
|
|
rcStgPortPathCost32 Integer32,
|
|
rcStgPortAdminPathCost INTEGER,
|
|
rcStgPortAdminPathCost32 Integer32
|
|
}
|
|
|
|
rcStgPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE "IEEE 802.1D-1990: Section 6.8.2.1.2"
|
|
::= { rcStgPortEntry 1 }
|
|
|
|
rcStgPortStgId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The STG identifier this port is assigned to."
|
|
::= { rcStgPortEntry 2 }
|
|
|
|
rcStgPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value of the priority field which is
|
|
contained in the first (in network byte order)
|
|
octet of the (2 octet long) Port ID. The other
|
|
octet of the Port ID is given by the value of
|
|
rcStgPort."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.1"
|
|
DEFVAL { 128 }
|
|
::= { rcStgPortEntry 3 }
|
|
|
|
rcStgPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port's current state as defined by
|
|
application of the Spanning Tree Protocol. This
|
|
state controls what action a port takes on
|
|
reception of a frame. If the bridge has detected
|
|
a port that is malfunctioning it will place that
|
|
port into the broken(6) state. For ports which
|
|
are disabled (see rcStgPortEnable), this object
|
|
will have a value of disabled(1)."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2"
|
|
::= { rcStgPortEntry 4 }
|
|
|
|
|
|
rcStgPortEnableStp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The enabled/disabled status of the port."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2"
|
|
DEFVAL { true }
|
|
::= { rcStgPortEntry 5 }
|
|
|
|
rcStgPortFastStart OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this flag is set, the port is moved
|
|
straight to the forwarding(5) state upon
|
|
being enabled."
|
|
DEFVAL { false }
|
|
::= { rcStgPortEntry 6 }
|
|
|
|
rcStgPortPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1990 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.3"
|
|
::= { rcStgPortEntry 7 }
|
|
|
|
rcStgPortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.4"
|
|
::= { rcStgPortEntry 8 }
|
|
|
|
rcStgPortDesignatedCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The path cost of the Designated Port of the
|
|
segment connected to this port. This value is
|
|
compared to the Root Path Cost field in received
|
|
bridge PDUs."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.5"
|
|
::= { rcStgPortEntry 9 }
|
|
|
|
rcStgPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Bridge Identifier of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.6"
|
|
::= { rcStgPortEntry 10 }
|
|
|
|
rcStgPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
REFERENCE "IEEE 802.1D-1990: Section 4.5.5.7"
|
|
::= { rcStgPortEntry 11 }
|
|
|
|
rcStgPortForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { rcStgPortEntry 12 }
|
|
|
|
rcStgPortInConfigBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Config BPUDs received by
|
|
this port."
|
|
::= { rcStgPortEntry 13 }
|
|
|
|
rcStgPortInTcnBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Topology Change Notification
|
|
BPUDs received by this port."
|
|
::= { rcStgPortEntry 14 }
|
|
|
|
rcStgPortInBadBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Bad BPUDs received by this port."
|
|
::= { rcStgPortEntry 15 }
|
|
|
|
rcStgPortOutConfigBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Config BPUDs transmitted by this port."
|
|
::= { rcStgPortEntry 16 }
|
|
|
|
rcStgPortOutTcnBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Topology Change Notification
|
|
BPUDs transmitted by this port."
|
|
::= { rcStgPortEntry 17 }
|
|
|
|
rcStgPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status."
|
|
::= { rcStgPortEntry 18 }
|
|
|
|
rcStgPortChangeDetection OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If disabled, topology change notifications
|
|
are not sent for the port."
|
|
DEFVAL { true }
|
|
::= { rcStgPortEntry 19 }
|
|
|
|
rcStgPortPathCost32 OBJECT-TYPE
|
|
SYNTAX Integer32 (1..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1998 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN.
|
|
Replacement for deprecated object dot1dStpPortPathCost."
|
|
::= { rcStgPortEntry 20 }
|
|
|
|
rcStgPortAdminPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative value of rcStgPortPathCost. This is
|
|
the value that has been configured by the user, or 0 if
|
|
there is no user-configured value. Note that a Set
|
|
request on rcStgPortPathCost will also modify the
|
|
corresponding value of this object."
|
|
DEFVAL { 0 }
|
|
::= { rcStgPortEntry 21 }
|
|
|
|
rcStgPortAdminPathCost32 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative value of rcStgPortPathCost32. This
|
|
is the value that has been configured by the user, or 0
|
|
if there is no user-configured value. Note that a Set
|
|
request on rcStgPortPathCost32 will also modify the
|
|
corresponding value of this object."
|
|
DEFVAL { 0 }
|
|
::= { rcStgPortEntry 22 }
|
|
|
|
rcStgNotAllowedPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A bitfield used to identify which ports in
|
|
the system that cannot be assigned to any STG
|
|
(i.e., which ports are single routable ports).
|
|
The bitfield is 32 octets long representing
|
|
ports 0 to 255 (inclusive)."
|
|
::= { rcStg 6 }
|
|
|
|
|
|
-- rcBridge Group
|
|
-- Forwarding Database for Transparent Bridges
|
|
|
|
rcBridgeFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "This table is an replacement to the standard
|
|
dot1dTpFdbTable in rfc1493."
|
|
::= { rcBridge 1 }
|
|
|
|
rcBridgeFdbEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Information about a specific unicast MAC address
|
|
for which the bridge has some forwarding information."
|
|
INDEX { rcBridgeFdbStatus, rcBridgeFdbAddress, rcBridgeFdbVlanId }
|
|
::= { rcBridgeFdbTable 1 }
|
|
|
|
RcBridgeFdbEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeFdbStatus INTEGER,
|
|
rcBridgeFdbAddress MacAddress,
|
|
rcBridgeFdbPort InterfaceIndex,
|
|
rcBridgeFdbMonitor TruthValue,
|
|
rcBridgeFdbPriority INTEGER, --excluded
|
|
rcBridgeFdbQosLevel INTEGER,
|
|
rcBridgeFdbSmltRemote TruthValue,
|
|
rcBridgeFdbVlanId RcVlanIdOrNone
|
|
}
|
|
|
|
rcBridgeFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5),
|
|
discard(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "This object indicates the status of this entry."
|
|
::= { rcBridgeFdbEntry 1 }
|
|
|
|
rcBridgeFdbAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "A unicast MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
REFERENCE "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
|
|
::= { rcBridgeFdbEntry 2 }
|
|
|
|
rcBridgeFdbPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Either the value '0', or the port number of the
|
|
port on which a frame having a source address
|
|
equal to the value of the corresponding instance
|
|
of rcBridgeFdbAddress has been seen. A value of
|
|
'0' indicates that the port number has not been
|
|
learned but that the bridge does have some
|
|
forwarding/filtering information about this
|
|
address (e.g. in the dot1dStaticTable).
|
|
Implementors are encouraged to assign the port
|
|
value to this object whenever it is learned even
|
|
for addresses for which the corresponding value of
|
|
rcBridgeFdbStatus is not learned(3)."
|
|
::= { rcBridgeFdbEntry 3 }
|
|
|
|
rcBridgeFdbMonitor OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate whether monitoring should be
|
|
performed on this unicast MAC address. If
|
|
monitoring is enabled, any packet received
|
|
with a matching destination MAC address
|
|
will be forwarded to the port configured to
|
|
receive monitor traffic."
|
|
::= { rcBridgeFdbEntry 4 }
|
|
|
|
rcBridgeFdbPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(0),
|
|
high(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the priority of the incoming
|
|
frames with this destination Mac Address."
|
|
DEFVAL { low }
|
|
::= { rcBridgeFdbEntry 5 }
|
|
|
|
rcBridgeFdbQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the qos level of the incoming
|
|
frames with this destination Mac Address."
|
|
DEFVAL { level1 }
|
|
::= { rcBridgeFdbEntry 6 }
|
|
|
|
rcBridgeFdbSmltRemote OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "A MAC address indicate for remote learnt,
|
|
either local or remote."
|
|
::= { rcBridgeFdbEntry 7 }
|
|
|
|
rcBridgeFdbVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcBridgeFdbEntry 8 }
|
|
|
|
rcBridgeFdbTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in
|
|
the bridge forwarding database table."
|
|
::= { rcBridge 2 }
|
|
|
|
|
|
-- The Static (Destination-Address) Database
|
|
|
|
rcBridgeStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is a proprietary replacement to the
|
|
standard dot1dStaticTable in rfc1493."
|
|
::= { rcBridge 3 }
|
|
|
|
rcBridgeStaticEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing forwarding information about
|
|
unicast entries configured into the bridge by
|
|
management. This information is used by the
|
|
transparent bridging function in determining how
|
|
to propagate a received frame."
|
|
INDEX { rcBridgeStaticAddress,
|
|
rcBridgeStaticPort,
|
|
rcBridgeStaticVlanId }
|
|
::= { rcBridgeStaticTable 1 }
|
|
|
|
RcBridgeStaticEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeStaticAddress MacAddress,
|
|
rcBridgeStaticPort InterfaceIndex,
|
|
rcBridgeStaticMonitor TruthValue,
|
|
rcBridgeStaticPriority INTEGER, --excluded
|
|
rcBridgeStaticStatus INTEGER,
|
|
rcBridgeStaticQosLevel INTEGER,
|
|
rcBridgeStaticVlanId RcVlanIdOrNone
|
|
}
|
|
|
|
rcBridgeStaticAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of this entry."
|
|
::= { rcBridgeStaticEntry 1 }
|
|
|
|
rcBridgeStaticPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port on which the MAC address is found."
|
|
::= { rcBridgeStaticEntry 2 }
|
|
|
|
rcBridgeStaticMonitor OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether monitoring should be
|
|
performed on incoming packets that match this
|
|
entry."
|
|
::= { rcBridgeStaticEntry 3 }
|
|
|
|
rcBridgeStaticPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(0),
|
|
high(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate forwarding priority of incoming
|
|
packets that match this entry."
|
|
DEFVAL { low }
|
|
::= { rcBridgeStaticEntry 4 }
|
|
|
|
rcBridgeStaticStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permanent(3),
|
|
deleteOnReset(4),
|
|
deleteOnTimeout(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this
|
|
entry. The default value is permanent(3)."
|
|
::= { rcBridgeStaticEntry 5 }
|
|
|
|
rcBridgeStaticQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the qos level."
|
|
DEFVAL { level1 }
|
|
::= { rcBridgeStaticEntry 6 }
|
|
|
|
rcBridgeStaticVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcBridgeStaticEntry 7 }
|
|
|
|
rcBridgeStaticTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in
|
|
the bridge static table."
|
|
::= { rcBridge 4 }
|
|
|
|
-- The filtering (Destination-Address) Database
|
|
|
|
rcBridgeFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is a proprietary replacement to the
|
|
standard dot1dStaticTable (Filtering information)
|
|
in rfc1493."
|
|
::= { rcBridge 5 }
|
|
|
|
rcBridgeFilterEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing filtering information configured
|
|
into the bridge by management specifying a dest-
|
|
ination address on a specific port and a set of
|
|
incoming ports. Frames received from one of the
|
|
incoming ports and containing the specific
|
|
destination addresses are not allowed to be
|
|
forwarded."
|
|
INDEX { rcBridgeFilterAddress,
|
|
rcBridgeFilterPort,
|
|
rcBridgeFilterVlanId }
|
|
::= { rcBridgeFilterTable 1 }
|
|
|
|
RcBridgeFilterEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeFilterAddress MacAddress,
|
|
rcBridgeFilterPort InterfaceIndex,
|
|
rcBridgeFilterNotAllowedFrom OCTET STRING,
|
|
rcBridgeFilterStatus INTEGER,
|
|
rcBridgeFilterVlanId RcVlanIdOrNone,
|
|
rcBridgeFilterPcap TruthValue,
|
|
rcBridgeFilterDestDiscard OCTET STRING,
|
|
rcBridgeFilterSrcDiscard OCTET STRING
|
|
}
|
|
|
|
rcBridgeFilterAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of this entry. This address is used
|
|
to match the destination address of incoming packets."
|
|
::= { rcBridgeFilterEntry 1 }
|
|
|
|
rcBridgeFilterPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port on which this MAC address is found."
|
|
::= { rcBridgeFilterEntry 2 }
|
|
|
|
rcBridgeFilterNotAllowedFrom OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(88))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate a set of ports. Traffic arriving
|
|
on any of the specified ports is not forwarded to this
|
|
MAC address."
|
|
::= { rcBridgeFilterEntry 3 }
|
|
|
|
rcBridgeFilterStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permanent(3),
|
|
deleteOnReset(4),
|
|
deleteOnTimeout(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this
|
|
entry. The default value is permanent(3)."
|
|
::= { rcBridgeFilterEntry 4 }
|
|
|
|
rcBridgeFilterVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcBridgeFilterEntry 5 }
|
|
|
|
rcBridgeFilterPcap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable pcap for the fdb-filter"
|
|
DEFVAL { false }
|
|
::= { rcBridgeFilterEntry 6 }
|
|
|
|
rcBridgeFilterDestDiscard OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(88))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate a set of ports. Traffic arriving
|
|
on any of the specified ports from this MAC address."
|
|
::= { rcBridgeFilterEntry 7 }
|
|
|
|
rcBridgeFilterSrcDiscard OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(88))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate a set of ports. Traffic arriving
|
|
on any of the specified ports is not forwarded to
|
|
this MAC address."
|
|
::= { rcBridgeFilterEntry 8 }
|
|
|
|
|
|
rcBridgeFilterTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in
|
|
the bridge filter table."
|
|
::= { rcBridge 6 }
|
|
|
|
-- The unknown mac discard config table
|
|
|
|
rcBridgeUnknownMacDiscardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeUnknownMacDiscardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to configure the 'unknown mac discard' feature.
|
|
This feature applies to layer 2 and layer 3 packets coming from
|
|
or going out to a specific physical port."
|
|
::= { rcBridge 7 }
|
|
|
|
rcBridgeUnknownMacDiscardEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeUnknownMacDiscardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information configuring
|
|
the 'unknown mac discard' feature."
|
|
INDEX { rcBridgeUnknownMacDiscardIfIndex }
|
|
::= { rcBridgeUnknownMacDiscardTable 1 }
|
|
|
|
RcBridgeUnknownMacDiscardEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeUnknownMacDiscardIfIndex InterfaceIndex,
|
|
rcBridgeUnknownMacDiscardAutoLearnEnable TruthValue,
|
|
rcBridgeUnknownMacDiscardAutoLearnMode INTEGER,
|
|
rcBridgeUnknownMacDiscardAutoLearnTableMode INTEGER,
|
|
rcBridgeUnknownMacDiscardLogViolations INTEGER,
|
|
rcBridgeUnknownMacDiscardSendTrap INTEGER,
|
|
rcBridgeUnknownMacDiscardDisablePort INTEGER,
|
|
rcBridgeUnknownMacDiscardDefaultAutoLearnMonitor INTEGER,
|
|
rcBridgeUnknownMacDiscardDefaultAutoLearnPriority INTEGER,
|
|
rcBridgeUnknownMacDiscardMacCountMax INTEGER,
|
|
rcBridgeUnknownMacDiscardMacCountCur INTEGER
|
|
}
|
|
|
|
rcBridgeUnknownMacDiscardIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port on which this 'unknown mac discard' configuration applied to."
|
|
::= { rcBridgeUnknownMacDiscardEntry 1 }
|
|
|
|
rcBridgeUnknownMacDiscardAutoLearnEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable is used to enable/disable the auto-learn capability
|
|
of a specific port. The default value is auto-learn disabled."
|
|
::= { rcBridgeUnknownMacDiscardEntry 2 }
|
|
|
|
rcBridgeUnknownMacDiscardAutoLearnMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
oneShot(1),
|
|
continuous(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable is used to control the auto-learn mode to either
|
|
one-shot or continuous. In one-shot mode, the first n MAC addresses
|
|
will be learned. The number n is dependents on the system's
|
|
available resource. In continuous mode, MAC address is continuous
|
|
learned until the resource limit is reached. After that the
|
|
subsequent MAC will be disallowed until one of the original
|
|
learned MAC is aged out. The default value is one-shot mode."
|
|
::= { rcBridgeUnknownMacDiscardEntry 3 }
|
|
|
|
rcBridgeUnknownMacDiscardAutoLearnTableMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unlock(1),
|
|
lock(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This MIB variable is used to lock or unlock the auto-learn MAC
|
|
table. When the auto-learn table is lock neither new MAC will be
|
|
learned nor the original learned MAC will be aged out. User needs
|
|
to lock the auto-learn table before MAC addresses can be save to
|
|
the NVRAM. The whole auto-learn table will be flushed when the
|
|
setting change from lock to unlock mode. The default value is
|
|
unlock mode."
|
|
::= { rcBridgeUnknownMacDiscardEntry 4 }
|
|
|
|
rcBridgeUnknownMacDiscardLogViolations OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable controls the logging action that the system will
|
|
take when a MAC address violation event was detected. The
|
|
value 'enable' means a log record will be written to the system
|
|
log file when a violation event was detected. The default value
|
|
is enable."
|
|
::= { rcBridgeUnknownMacDiscardEntry 5 }
|
|
|
|
rcBridgeUnknownMacDiscardSendTrap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable controls the send trap action that system will take
|
|
when a MAC address violation event was detected. The value 'enable'
|
|
means a SNMP trap packet will be send to the management station
|
|
when a violation event was detected. The default value is disable."
|
|
::= { rcBridgeUnknownMacDiscardEntry 6 }
|
|
|
|
rcBridgeUnknownMacDiscardDisablePort OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable controls the 'disable-port' action that system
|
|
will take when a MAC address violation event was detected. The
|
|
value 'enable' means the specific port will be disabled when the
|
|
violation event was detected. It needs user manually to bring
|
|
the port back once it was disabled. The default value is disable."
|
|
::= { rcBridgeUnknownMacDiscardEntry 7 }
|
|
|
|
rcBridgeUnknownMacDiscardDefaultAutoLearnMonitor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
monitor(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "This variable controls the default monitor setting of an auto-learn
|
|
MAC address. The value 'monitor' means a copy of packet that send
|
|
from or to the auto-learned MAC address will be forwarded to the
|
|
designated monitoring port on the system. The default value is none."
|
|
::= { rcBridgeUnknownMacDiscardEntry 8 }
|
|
|
|
rcBridgeUnknownMacDiscardDefaultAutoLearnPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
high(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "This variable controls the default priority setting of an
|
|
auto-learn MAC address. The value 'low' means packets send from
|
|
the MAC address is forwarded at low priority. The value 'high'
|
|
means packets send from the MAC address is forwarded at high
|
|
priority. The default value is low."
|
|
::= { rcBridgeUnknownMacDiscardEntry 9 }
|
|
|
|
rcBridgeUnknownMacDiscardMacCountMax OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2048)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable represents the maxium number of MACc that
|
|
can be added to some port."
|
|
DEFVAL { 2048 }
|
|
::= { rcBridgeUnknownMacDiscardEntry 10 }
|
|
|
|
rcBridgeUnknownMacDiscardMacCountCur OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable represents the current number of MACs that have
|
|
been added to some port."
|
|
DEFVAL { 0 }
|
|
::= { rcBridgeUnknownMacDiscardEntry 11 }
|
|
|
|
-- The Manual Edit table
|
|
|
|
rcBridgeManualEditTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeManualEditEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify what MAC addresses can be learned
|
|
on each port."
|
|
::= { rcBridge 8 }
|
|
|
|
rcBridgeManualEditEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeManualEditEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information of
|
|
MAC addresses that can be learned."
|
|
INDEX { rcBridgeManualEditAddress }
|
|
::= { rcBridgeManualEditTable 1 }
|
|
|
|
RcBridgeManualEditEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeManualEditAddress MacAddress,
|
|
rcBridgeManualEditPorts PortSet,
|
|
rcBridgeManualEditMonitor TruthValue,
|
|
rcBridgeManualEditPriority INTEGER,
|
|
rcBridgeManualEditStatus INTEGER
|
|
}
|
|
|
|
rcBridgeManualEditAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable contains the source MAC address of an entry."
|
|
::= { rcBridgeManualEditEntry 1 }
|
|
|
|
rcBridgeManualEditPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable contains the allowed ports on which the MAC
|
|
address of this entry can be learned."
|
|
::= { rcBridgeManualEditEntry 2 }
|
|
|
|
rcBridgeManualEditMonitor OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable specifies the monitoring setting of the MAC
|
|
address. The value 'true' means a copy of packet frame that
|
|
send from or to the MAC address is forwarded to the designated
|
|
monitoring port on the system. The default value is false."
|
|
::= { rcBridgeManualEditEntry 3 }
|
|
|
|
rcBridgeManualEditPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
high(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable specifies the priority setting of the MAC address.
|
|
The value 'low' means packet frames send from the MAC address
|
|
is forwarded at low priority. The default value is low."
|
|
::= { rcBridgeManualEditEntry 4 }
|
|
|
|
rcBridgeManualEditStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
active(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The variable controls the status of a MAC address in the table.
|
|
The value 'active' is used to add the MAC address entry into the
|
|
table. The value 'invalid' is used to delete the MAC address from
|
|
the table."
|
|
::= { rcBridgeManualEditEntry 5 }
|
|
|
|
rcBridgeManualEditTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in
|
|
the manual edit table."
|
|
::= { rcBridge 9 }
|
|
|
|
-- The Auto Learn table
|
|
|
|
rcBridgeAutoLearnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeAutoLearnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains information of auto-learned MAC address when
|
|
the 'unknow MAC discard' table's auto-learn is enabled. User must
|
|
explicitly lock and save the table into NVRAM in order to have
|
|
this table has the same configuration cross the system reset."
|
|
::= { rcBridge 10 }
|
|
|
|
rcBridgeAutoLearnEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeAutoLearnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entries in this table are created automatically
|
|
when the user explicitly does a lock operation on
|
|
the auto-learn-table (i.e., when 'AutoLearnTableMode'
|
|
is set to lock(2))."
|
|
INDEX { rcBridgeAutoLearnAddress }
|
|
::= { rcBridgeAutoLearnTable 1 }
|
|
|
|
RcBridgeAutoLearnEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeAutoLearnAddress MacAddress,
|
|
rcBridgeAutoLearnPort PortSet,
|
|
rcBridgeAutoLearnMonitor TruthValue,
|
|
rcBridgeAutoLearnPriority INTEGER,
|
|
rcBridgeAutoLearnAction INTEGER
|
|
}
|
|
|
|
rcBridgeAutoLearnAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable contains the source MAC address of the entries."
|
|
::= { rcBridgeAutoLearnEntry 1 }
|
|
|
|
rcBridgeAutoLearnPort OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable contains the port where the MAC address was learned."
|
|
::= { rcBridgeAutoLearnEntry 2 }
|
|
|
|
rcBridgeAutoLearnMonitor OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable contains the monitor setting of the MAC address.
|
|
The value 'true' means a copy of packet frame that send from or
|
|
to the MAC address is forwarded to the designated monitoring port
|
|
on the system. This value should be synchronized with the setting
|
|
of 'unknow MAC discard' table's 'Default AutoLearnMonitor' setting
|
|
when the MAC address was learned."
|
|
::= { rcBridgeAutoLearnEntry 3 }
|
|
|
|
rcBridgeAutoLearnPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
high(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable contains the priority setting of the MAC address.
|
|
The value 'low' means packet frames send from the MAC address is
|
|
forwarded at low priority. The value 'high' means packet frames
|
|
send from the MAC address is forwarded at high priority. This
|
|
value should be synchronized with the setting of 'unknow MAC
|
|
discard' table's 'DefaultAutoLearnPriority' setting when the MAC
|
|
address was learned."
|
|
::= { rcBridgeAutoLearnEntry 4 }
|
|
|
|
rcBridgeAutoLearnAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
convertToManualEdit(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This variable is for converting an auto-learned MAC address entry
|
|
to a manual edit MAC address entry. This variable provides a mechanism
|
|
for user to move a MAC address entry from auto-learn table to manual
|
|
edit table."
|
|
::= { rcBridgeAutoLearnEntry 5 }
|
|
|
|
|
|
rcBridgeAutoLearnTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in
|
|
the auto learn table."
|
|
::= { rcBridge 11 }
|
|
|
|
|
|
-- The Statis Multicast table
|
|
|
|
rcBridgeStaticMulticastTable OBJECT-TYPE --excluded
|
|
SYNTAX SEQUENCE OF RcBridgeStaticMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcBridge 12 }
|
|
|
|
rcBridgeStaticMulticastEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeStaticMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
INDEX { rcBridgeStaticMulticastAddress, rcBridgeStaticMulticastVlanId }
|
|
::= { rcBridgeStaticMulticastTable 1 }
|
|
|
|
RcBridgeStaticMulticastEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeStaticMulticastAddress MacAddress,
|
|
rcBridgeStaticMulticastForwardingPorts PortSet,
|
|
rcBridgeStaticMulticastMltIds IdList,
|
|
rcBridgeStaticMulticastRowStatus RowStatus,
|
|
rcBridgeStaticMulticastVlanId INTEGER,
|
|
rcBridgeStaticMulticastNumMltIds Integer32
|
|
}
|
|
|
|
rcBridgeStaticMulticastAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "src mac addr."
|
|
::= { rcBridgeStaticMulticastEntry 1 }
|
|
|
|
rcBridgeStaticMulticastForwardingPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "ports for forward this mac"
|
|
::= { rcBridgeStaticMulticastEntry 2 }
|
|
|
|
rcBridgeStaticMulticastMltIds OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "list of mlts this mac will be forwarded on"
|
|
::= { rcBridgeStaticMulticastEntry 3 }
|
|
|
|
rcBridgeStaticMulticastRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "row status"
|
|
::= { rcBridgeStaticMulticastEntry 4 }
|
|
|
|
rcBridgeStaticMulticastVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Vlan Id"
|
|
::= { rcBridgeStaticMulticastEntry 5 }
|
|
|
|
rcBridgeStaticMulticastNumMltIds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "number of mlts Ids"
|
|
::= { rcBridgeStaticMulticastEntry 6 }
|
|
|
|
rcBridgeStaticMulticastTblSize OBJECT-TYPE --excluded
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of entries in
|
|
the static multicast table."
|
|
::= { rcBridge 13 }
|
|
|
|
rcRateLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcRateLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcBridge 14 }
|
|
|
|
rcRateLimitEntry OBJECT-TYPE
|
|
SYNTAX RcRateLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcRateLimitIfIndex, rcRateLimitIfTrafficType }
|
|
::= { rcRateLimitTable 1 }
|
|
|
|
RcRateLimitEntry ::=
|
|
SEQUENCE {
|
|
rcRateLimitIfIndex InterfaceIndex,
|
|
rcRateLimitIfTrafficType INTEGER,
|
|
rcRateLimitIfAllowedRate INTEGER,
|
|
rcRateLimitIfEnable TruthValue,
|
|
rcRateLimitIfAllowedRatePps Integer32,
|
|
rcRateLimitIfAllowedRateKbps INTEGER,
|
|
rcRateLimitEgressRateLimit Integer32,
|
|
rcRateLimitEgressRateLimitState EnableValue
|
|
}
|
|
|
|
rcRateLimitIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port ifindex."
|
|
::= { rcRateLimitEntry 1 }
|
|
|
|
rcRateLimitIfTrafficType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
multicast(1),
|
|
broadcast(2),
|
|
broadcast-multicast(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Type of traffic allowed."
|
|
DEFVAL { broadcast }
|
|
::= { rcRateLimitEntry 2 }
|
|
|
|
rcRateLimitIfAllowedRate OBJECT-TYPE
|
|
SYNTAX INTEGER (1..25)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allowed traffic rate. If chassis type is 8100."
|
|
DEFVAL { 25 }
|
|
::= { rcRateLimitEntry 3 }
|
|
|
|
rcRateLimitIfEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Turn on/off rate limiting on this interface."
|
|
DEFVAL { false }
|
|
::= { rcRateLimitEntry 4 }
|
|
|
|
rcRateLimitIfAllowedRatePps OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allowed traffic rate packets per second.
|
|
If chassis type is 8600."
|
|
::= { rcRateLimitEntry 5 }
|
|
|
|
rcRateLimitIfAllowedRateKbps OBJECT-TYPE
|
|
SYNTAX INTEGER (250..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allowed traffic rate Kbits per second.
|
|
If chassis type is R-module."
|
|
::= { rcRateLimitEntry 6 }
|
|
|
|
rcRateLimitEgressRateLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Egress Rate Limit."
|
|
::= { rcRateLimitEntry 7 }
|
|
|
|
rcRateLimitEgressRateLimitState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable shape/egress-rate-limit
|
|
functionality."
|
|
::= { rcRateLimitEntry 8 }
|
|
|
|
-- The Static Multicast table
|
|
|
|
rcBridgeStaticMcastTable OBJECT-TYPE --excluded
|
|
SYNTAX SEQUENCE OF RcBridgeStaticMcastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcBridge 15 }
|
|
|
|
rcBridgeStaticMcastEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeStaticMcastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcBridgeStaticMcastVlanId, rcBridgeStaticMcastAddress }
|
|
::= { rcBridgeStaticMcastTable 1 }
|
|
|
|
RcBridgeStaticMcastEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeStaticMcastVlanId INTEGER,
|
|
rcBridgeStaticMcastAddress MacAddress,
|
|
rcBridgeStaticMcastForwardingPorts PortSet,
|
|
rcBridgeStaticMcastMltIds IdList,
|
|
rcBridgeStaticMcastNumMltIds Integer32,
|
|
rcBridgeStaticMcastRowStatus RowStatus
|
|
}
|
|
|
|
rcBridgeStaticMcastVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id"
|
|
::= { rcBridgeStaticMcastEntry 1 }
|
|
|
|
rcBridgeStaticMcastAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "src mac addr."
|
|
::= { rcBridgeStaticMcastEntry 2 }
|
|
|
|
rcBridgeStaticMcastForwardingPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ports for forward this mac"
|
|
::= { rcBridgeStaticMcastEntry 3 }
|
|
|
|
rcBridgeStaticMcastMltIds OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "list of mlts this mac will be forwarded on"
|
|
::= { rcBridgeStaticMcastEntry 4 }
|
|
|
|
rcBridgeStaticMcastNumMltIds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of mlts Ids"
|
|
::= { rcBridgeStaticMcastEntry 5 }
|
|
|
|
rcBridgeStaticMcastRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rcBridgeStaticMcastEntry 6 }
|
|
|
|
|
|
-- The filtering (Destination-Address) Database for PP8300
|
|
|
|
rcBridgePP8300FilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgePP8300FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is a proprietary replacement to the
|
|
standard dot1dStaticTable (Filtering information)
|
|
in rfc1493. This table is specific for PP8300."
|
|
::= { rcBridge 16 }
|
|
|
|
rcBridgePP8300FilterEntry OBJECT-TYPE
|
|
SYNTAX RcBridgePP8300FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcBridgePP8300FilterAddress,
|
|
rcBridgePP8300FilterVlanId }
|
|
::= { rcBridgePP8300FilterTable 1 }
|
|
|
|
RcBridgePP8300FilterEntry ::=
|
|
SEQUENCE {
|
|
rcBridgePP8300FilterAddress MacAddress,
|
|
rcBridgePP8300FilterVlanId INTEGER,
|
|
rcBridgePP8300FilterDropCommand INTEGER,
|
|
rcBridgePP8300FilterQosLevel INTEGER,
|
|
rcBridgePP8300FilterPort Integer32,
|
|
rcBridgePP8300FilterStatus INTEGER
|
|
}
|
|
|
|
rcBridgePP8300FilterAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of this entry. This address is used
|
|
to match the destination address of incoming packets."
|
|
::= { rcBridgePP8300FilterEntry 1 }
|
|
|
|
rcBridgePP8300FilterVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcBridgePP8300FilterEntry 2 }
|
|
|
|
rcBridgePP8300FilterDropCommand OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
srcDrop(2),
|
|
dstDrop(3),
|
|
bothDrop(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcBridgePP8300FilterEntry 3 }
|
|
|
|
rcBridgePP8300FilterQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the qos level."
|
|
DEFVAL { level1 }
|
|
::= { rcBridgePP8300FilterEntry 4 }
|
|
|
|
rcBridgePP8300FilterPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Mac filter needs the device Id and port Id programmed
|
|
properly to make the SA drop working properly"
|
|
::= { rcBridgePP8300FilterEntry 5 }
|
|
|
|
rcBridgePP8300FilterStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permanent(3),
|
|
deleteOnReset(4),
|
|
deleteOnTimeout(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this
|
|
entry. The default value is permanent(3)."
|
|
::= { rcBridgePP8300FilterEntry 6 }
|
|
|
|
|
|
-- rcBridge Fdb Protect Table
|
|
|
|
|
|
rcBridgeFdbProtectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeFdbProtectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table gives information about the mac learning
|
|
limits on a particular port."
|
|
::= { rcBridge 17 }
|
|
|
|
rcBridgeFdbProtectEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeFdbProtectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a specific MAC address learning
|
|
limits of a specific port."
|
|
INDEX { rcBridgeFdbProtectPortNum }
|
|
::= { rcBridgeFdbProtectTable 1 }
|
|
|
|
RcBridgeFdbProtectEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeFdbProtectPortNum InterfaceIndex,
|
|
rcBridgeFdbProtectMaxMacCount Integer32,
|
|
rcBridgeFdbProtectMinMacCount Integer32,
|
|
rcBridgeFdbProtectEnable EnableValue,
|
|
rcBridgeFdbProtectCurrentMacCount Integer32,
|
|
rcBridgeFdbProtectMacLearning TruthValue,
|
|
rcBridgeFdbProtectViolationLogTrap EnableValue,
|
|
rcBridgeFdbProtectViolationDownPort EnableValue
|
|
}
|
|
|
|
rcBridgeFdbProtectPortNum OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object is the interface on which MAC address
|
|
learning limit is applied."
|
|
::= { rcBridgeFdbProtectEntry 1 }
|
|
|
|
rcBridgeFdbProtectMaxMacCount OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate maximum number of MAC address
|
|
that can be learnt on the port."
|
|
DEFVAL { 1024 }
|
|
::= { rcBridgeFdbProtectEntry 2 }
|
|
|
|
rcBridgeFdbProtectMinMacCount OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate minimum number of MAC address
|
|
learnt which mac address learning will be re-enabled
|
|
on the port."
|
|
DEFVAL { 512 }
|
|
::= { rcBridgeFdbProtectEntry 3 }
|
|
|
|
rcBridgeFdbProtectEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable or disable MAC learning limit
|
|
feature on the port."
|
|
::= { rcBridgeFdbProtectEntry 4 }
|
|
|
|
rcBridgeFdbProtectCurrentMacCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the current number of
|
|
MAC address learnt on the port."
|
|
::= { rcBridgeFdbProtectEntry 5 }
|
|
|
|
rcBridgeFdbProtectMacLearning OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates whether the port can
|
|
currrently learn new MAC addresses or not."
|
|
::= { rcBridgeFdbProtectEntry 6 }
|
|
|
|
rcBridgeFdbProtectViolationLogTrap OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable or disable logging and sending
|
|
of snmp trap, once MAC learning limit is reached
|
|
for the port."
|
|
::= { rcBridgeFdbProtectEntry 7 }
|
|
|
|
rcBridgeFdbProtectViolationDownPort OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable or disable the action of disabling
|
|
the port, once MAC learning limit is reached
|
|
for the port."
|
|
::= { rcBridgeFdbProtectEntry 8 }
|
|
|
|
-- Following between =begin =end is processed by mib_tools/extras.awk
|
|
-- =begin enum
|
|
-- rcBridgeFdbProtectMaxMacCountMax 64000 64000
|
|
-- rcBridgeFdbProtectMinMacCountMax 64000 64000
|
|
-- =end enum
|
|
|
|
|
|
-- Forwarding Database for Transparent Bridges
|
|
|
|
rcBridgeNewFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeNewFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is an replacement to the standard
|
|
dot1dTpFdbTable in rfc1493."
|
|
::= { rcBridge 18 }
|
|
|
|
rcBridgeNewFdbEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeNewFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a specific unicast MAC address
|
|
for which the bridge has some forwarding information."
|
|
INDEX { rcBridgeNewFdbAddress, rcBridgeNewFdbVlanId }
|
|
::= { rcBridgeNewFdbTable 1 }
|
|
|
|
RcBridgeNewFdbEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeNewFdbStatus INTEGER,
|
|
rcBridgeNewFdbAddress MacAddress,
|
|
rcBridgeNewFdbPort InterfaceIndex,
|
|
rcBridgeNewFdbMonitor TruthValue,
|
|
rcBridgeNewFdbQosLevel INTEGER,
|
|
rcBridgeNewFdbSmltRemote TruthValue,
|
|
rcBridgeNewFdbVlanId RcVlanIdOrNone
|
|
}
|
|
|
|
rcBridgeNewFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5),
|
|
discard(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this entry."
|
|
::= { rcBridgeNewFdbEntry 1 }
|
|
|
|
rcBridgeNewFdbAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A unicast MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
REFERENCE "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
|
|
::= { rcBridgeNewFdbEntry 2 }
|
|
|
|
rcBridgeNewFdbPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Either the value '0', or the port number of the
|
|
port on which a frame having a source address
|
|
equal to the value of the corresponding instance
|
|
of rcBridgeNewFdbAddress has been seen. A value of
|
|
'0' indicates that the port number has not been
|
|
learned but that the bridge does have some
|
|
forwarding/filtering information about this
|
|
address (e.g. in the dot1dStaticTable).
|
|
Implementors are encouraged to assign the port
|
|
value to this object whenever it is learned even
|
|
for addresses for which the corresponding value of
|
|
rcBridgeNewFdbStatus is not learned(3)."
|
|
::= { rcBridgeNewFdbEntry 3 }
|
|
|
|
rcBridgeNewFdbMonitor OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether monitoring should be
|
|
performed on this unicast MAC address. If
|
|
monitoring is enabled, any packet received
|
|
with a matching destination MAC address
|
|
will be forwarded to the port configured to
|
|
receive monitor traffic."
|
|
::= { rcBridgeNewFdbEntry 4 }
|
|
|
|
rcBridgeNewFdbQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the qos level of the incoming
|
|
frames with this destination Mac Address."
|
|
DEFVAL { level1 }
|
|
::= { rcBridgeNewFdbEntry 5 }
|
|
|
|
rcBridgeNewFdbSmltRemote OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A MAC address indicate for remote learnt,
|
|
either local or remote."
|
|
::= { rcBridgeNewFdbEntry 6 }
|
|
|
|
rcBridgeNewFdbVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the Vlan ID for this
|
|
MAC address."
|
|
::= { rcBridgeNewFdbEntry 7 }
|
|
|
|
-- rcBridgeMmrpGrpFdb
|
|
|
|
rcBridgeMmrpGrpFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeMmrpGrpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is for multicast group fdb entries"
|
|
::= { rcBridge 19 }
|
|
|
|
rcBridgeMmrpGrpFdbEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeMmrpGrpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a specific multicast group MAC
|
|
address for which the bridge has some forwarding
|
|
information."
|
|
INDEX { rcBridgeMmrpGrpFdbVlanId, rcBridgeMmrpGrpFdbAddr}
|
|
::= { rcBridgeMmrpGrpFdbTable 1 }
|
|
|
|
RcBridgeMmrpGrpFdbEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeMmrpGrpFdbVlanId Integer32,
|
|
rcBridgeMmrpGrpFdbAddr MacAddress,
|
|
rcBridgeMmrpGrpFdbPortList PortSet
|
|
}
|
|
|
|
rcBridgeMmrpGrpFdbVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the Vlan ID for this
|
|
MAC address."
|
|
::= { rcBridgeMmrpGrpFdbEntry 1 }
|
|
|
|
rcBridgeMmrpGrpFdbAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A multicast group MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
REFERENCE ""
|
|
::= { rcBridgeMmrpGrpFdbEntry 2 }
|
|
|
|
|
|
rcBridgeMmrpGrpFdbPortList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of ports"
|
|
::= { rcBridgeMmrpGrpFdbEntry 3 }
|
|
|
|
-- Forwarding Database for Transparent(TP) Bridges
|
|
|
|
rcBridgeTpFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is an replacement to the standard
|
|
dot1dTpFdbTable in rfc1493."
|
|
::= { rcBridge 20 }
|
|
|
|
rcBridgeTpFdbEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a specific unicast MAC address
|
|
for which the bridge has some forwarding information."
|
|
INDEX { rcBridgeTpFdbVlanId, rcBridgeTpFdbAddress}
|
|
::= { rcBridgeTpFdbTable 1 }
|
|
|
|
RcBridgeTpFdbEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeTpFdbVlanId RcVlanIdOrNone,
|
|
rcBridgeTpFdbAddress MacAddress,
|
|
rcBridgeTpFdbStatus INTEGER,
|
|
rcBridgeTpFdbPort InterfaceIndex,
|
|
rcBridgeTpFdbSmltRemote TruthValue,
|
|
rcBridgeTpFdbBMac MacAddress,
|
|
rcBridgeTpFdbMonitor TruthValue,
|
|
rcBridgeTpFdbQosLevel INTEGER,
|
|
rcBridgeTpFdbCvid Integer32
|
|
}
|
|
|
|
rcBridgeTpFdbVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the Vlan ID for this
|
|
MAC address."
|
|
::= { rcBridgeTpFdbEntry 1 }
|
|
|
|
|
|
rcBridgeTpFdbAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unicast MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
REFERENCE "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
|
|
::= { rcBridgeTpFdbEntry 2 }
|
|
|
|
rcBridgeTpFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this entry."
|
|
::= { rcBridgeTpFdbEntry 3 }
|
|
|
|
rcBridgeTpFdbPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Either the value '0', or the port number of the
|
|
port on which a frame having a source address
|
|
equal to the value of the corresponding instance
|
|
of rcBridgeTpFdbAddress has been seen. A value of
|
|
'0' indicates that the port number has not been
|
|
learned but that the bridge does have some
|
|
forwarding/filtering information about this
|
|
address (e.g. in the dot1dStaticTable).
|
|
Implementors are encouraged to assign the port
|
|
value to this object whenever it is learned even
|
|
for addresses for which the corresponding value of
|
|
rcBridgeTpFdbStatus is not learned(3)."
|
|
::= { rcBridgeTpFdbEntry 4 }
|
|
|
|
rcBridgeTpFdbSmltRemote OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A MAC address indicate for remote learnt,
|
|
either local or remote."
|
|
::= { rcBridgeTpFdbEntry 5 }
|
|
|
|
rcBridgeTpFdbBMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If the rcBridgeTpFdbEntry is learned from a SPBM network,
|
|
instead of using port to track where the rcBridgeTpFdbAddress
|
|
come from, the backbone MAC address is used to track that."
|
|
::= { rcBridgeTpFdbEntry 6 }
|
|
|
|
rcBridgeTpFdbMonitor OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether monitoring should be
|
|
performed on this unicast MAC address. If
|
|
monitoring is enabled, any packet received
|
|
with a matching destination MAC address
|
|
will be forwarded to the port configured to
|
|
receive monitor traffic."
|
|
DEFVAL { false }
|
|
::= { rcBridgeTpFdbEntry 7 }
|
|
|
|
rcBridgeTpFdbQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level0(1),
|
|
level1(2),
|
|
level2(3),
|
|
level3(4),
|
|
level4(5),
|
|
level5(6),
|
|
level6(7),
|
|
level7(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the qos level of the incoming
|
|
frames with this destination Mac Address."
|
|
DEFVAL { level1 }
|
|
::= { rcBridgeTpFdbEntry 8 }
|
|
|
|
rcBridgeTpFdbCvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to identify customer vid of the switched uni port
|
|
of this entry is associated with. 4095 is not used. 4096
|
|
is reserved for untagged case."
|
|
::= { rcBridgeTpFdbEntry 9 }
|
|
|
|
-- rcBridgeRemoteMacTable
|
|
|
|
rcBridgeRemoteMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeRemoteMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is for PLSB cvlan UNI remote mac entries"
|
|
::= { rcBridge 21 }
|
|
|
|
rcBridgeRemoteMacEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeRemoteMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a specific cvlan UNI remote MAC
|
|
address for which the bridge has the forwarding
|
|
information."
|
|
INDEX { rcBridgeRemoteMacVlanId, rcBridgeRemoteMacAddr}
|
|
::= { rcBridgeRemoteMacTable 1 }
|
|
|
|
RcBridgeRemoteMacEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeRemoteMacVlanId Integer32,
|
|
rcBridgeRemoteMacAddr MacAddress,
|
|
rcBridgeRemoteMacStatus INTEGER,
|
|
rcBridgeRemoteMacDestAddr MacAddress,
|
|
rcBridgeRemoteMacPrimaryBVlanId Integer32,
|
|
rcBridgeRemoteMacPrimaryDestSysName OCTET STRING,
|
|
rcBridgeRemoteMacPrimaryPort InterfaceIndex,
|
|
rcBridgeRemoteMacSecondaryBVlanId Integer32,
|
|
rcBridgeRemoteMacSecondaryDestSysName OCTET STRING,
|
|
rcBridgeRemoteMacSecondaryPort InterfaceIndex,
|
|
rcBridgeRemoteMacSmltRemote TruthValue
|
|
}
|
|
|
|
rcBridgeRemoteMacVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the Vlan ID for this
|
|
MAC address."
|
|
::= { rcBridgeRemoteMacEntry 1 }
|
|
|
|
rcBridgeRemoteMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A customer MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
REFERENCE ""
|
|
::= { rcBridgeRemoteMacEntry 2 }
|
|
|
|
rcBridgeRemoteMacStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this entry."
|
|
::= { rcBridgeRemoteMacEntry 3 }
|
|
|
|
rcBridgeRemoteMacDestAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A provider MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
REFERENCE ""
|
|
::= { rcBridgeRemoteMacEntry 4 }
|
|
|
|
rcBridgeRemoteMacPrimaryBVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the BVlan ID for this
|
|
MAC address."
|
|
::= { rcBridgeRemoteMacEntry 5 }
|
|
|
|
rcBridgeRemoteMacPrimaryDestSysName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Primary System name of the node where MAC address entry
|
|
come from."
|
|
::= { rcBridgeRemoteMacEntry 6 }
|
|
|
|
rcBridgeRemoteMacPrimaryPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Either the value '0', or the primary
|
|
port on which a frame came from."
|
|
::= { rcBridgeRemoteMacEntry 7 }
|
|
|
|
rcBridgeRemoteMacSecondaryBVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the BVlan ID for this
|
|
MAC address."
|
|
::= { rcBridgeRemoteMacEntry 8 }
|
|
|
|
rcBridgeRemoteMacSecondaryDestSysName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Secondary System name of the node where MAC address entry
|
|
come from."
|
|
::= { rcBridgeRemoteMacEntry 9 }
|
|
|
|
rcBridgeRemoteMacSecondaryPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Either the value '0', or the secondary
|
|
port on which a frame came from."
|
|
::= { rcBridgeRemoteMacEntry 10 }
|
|
|
|
rcBridgeRemoteMacSmltRemote OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A MAC address indicate for remote learnt from ist peer"
|
|
::= { rcBridgeRemoteMacEntry 11 }
|
|
|
|
-- rcBridgeSpbmMacTable
|
|
|
|
rcBridgeSpbmMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeSpbmMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is for SPBM UNI MAC entries, local and remote"
|
|
::= { rcBridge 22 }
|
|
|
|
rcBridgeSpbmMacEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeSpbmMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a specific SPBM UNI MAC
|
|
address for which the bridge has the forwarding
|
|
information. MAC address can belong any SPBM UNI type,
|
|
local or remote"
|
|
INDEX { rcBridgeSpbmMacIsid, rcBridgeSpbmMacAddr }
|
|
::= { rcBridgeSpbmMacTable 1 }
|
|
|
|
RcBridgeSpbmMacEntry ::=
|
|
SEQUENCE {
|
|
rcBridgeSpbmMacIsid Integer32,
|
|
rcBridgeSpbmMacAddr MacAddress,
|
|
rcBridgeSpbmMacStatus INTEGER,
|
|
rcBridgeSpbmMacType INTEGER,
|
|
rcBridgeSpbmMacCVlanId Integer32,
|
|
rcBridgeSpbmMacCPort InterfaceIndex,
|
|
rcBridgeSpbmMacBDestAddr MacAddress,
|
|
rcBridgeSpbmMacBVlanId Integer32
|
|
}
|
|
|
|
rcBridgeSpbmMacIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the ISID for this
|
|
MAC address."
|
|
::= { rcBridgeSpbmMacEntry 1 }
|
|
|
|
rcBridgeSpbmMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A customer MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
REFERENCE ""
|
|
::= { rcBridgeSpbmMacEntry 2 }
|
|
|
|
rcBridgeSpbmMacStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this entry."
|
|
::= { rcBridgeSpbmMacEntry 3 }
|
|
|
|
rcBridgeSpbmMacType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
remote(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the type of this entry,
|
|
local or remote."
|
|
::= { rcBridgeSpbmMacEntry 4 }
|
|
|
|
rcBridgeSpbmMacCVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the CVlan ID for this
|
|
local MAC address."
|
|
::= { rcBridgeSpbmMacEntry 5 }
|
|
|
|
rcBridgeSpbmMacCPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the ifIndex for this
|
|
local MAC address."
|
|
::= { rcBridgeSpbmMacEntry 6 }
|
|
|
|
rcBridgeSpbmMacBDestAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A provider MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
REFERENCE ""
|
|
::= { rcBridgeSpbmMacEntry 7 }
|
|
|
|
rcBridgeSpbmMacBVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the BVlan ID for this
|
|
remote MAC address."
|
|
::= { rcBridgeSpbmMacEntry 8 }
|
|
|
|
-- ISID based FDB table
|
|
|
|
rcBridgeIsidFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeIsidFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is for all the mac entries that are learned
|
|
on the per i-sid basis.This gives both the locally learnt
|
|
and remote mac entries. "
|
|
::= { rcBridge 23 }
|
|
|
|
rcBridgeIsidFdbEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeIsidFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a UNI MAC address for
|
|
which the bridge has the forwarding information."
|
|
INDEX { rcBridgeIsidFdbIsidId, rcBridgeIsidFdbAddress}
|
|
::= { rcBridgeIsidFdbTable 1 }
|
|
|
|
RcBridgeIsidFdbEntry ::= SEQUENCE {
|
|
rcBridgeIsidFdbIsidId Integer32,
|
|
rcBridgeIsidFdbAddress MacAddress,
|
|
rcBridgeIsidFdbStatus INTEGER,
|
|
rcBridgeIsidFdbPort InterfaceIndex,
|
|
rcBridgeIsidFdbPortType INTEGER,
|
|
rcBridgeIsidFdbRemoteMacDestAddr MacAddress,
|
|
rcBridgeIsidFdbRemoteMacBVlanId Integer32,
|
|
rcBridgeIsidFdbRemoteMacDestSysName OCTET STRING,
|
|
rcBridgeIsidFdbCvid Integer32
|
|
}
|
|
|
|
rcBridgeIsidFdbIsidId OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the i-sid for this
|
|
MAC address."
|
|
::= { rcBridgeIsidFdbEntry 1 }
|
|
|
|
rcBridgeIsidFdbAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unicast MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
|
|
::= { rcBridgeIsidFdbEntry 2 }
|
|
|
|
rcBridgeIsidFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this entry."
|
|
::= { rcBridgeIsidFdbEntry 3 }
|
|
|
|
rcBridgeIsidFdbPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Either the value '0', or the port number of the
|
|
port on which a frame having a source address
|
|
equal to the value of the corresponding instance
|
|
of rcBridgeIsidFdbAddress has been seen."
|
|
::= { rcBridgeIsidFdbEntry 4 }
|
|
|
|
rcBridgeIsidFdbPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
remote(2),
|
|
ist-peer(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the whether the
|
|
rcBridgeIsidFdbAddress is learnt locally or
|
|
learnt on NNI port from a remote destination."
|
|
DEFVAL { 1 }
|
|
::= { rcBridgeIsidFdbEntry 5 }
|
|
|
|
rcBridgeIsidFdbRemoteMacDestAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A provider MAC address for which the bridge
|
|
has forwarding and/or filtering information.
|
|
This value is displayed only if the PortType
|
|
is remote otherwise a value of zero is displayed."
|
|
DEFVAL { "00-00-00-00-00-00" }
|
|
::= { rcBridgeIsidFdbEntry 6 }
|
|
|
|
rcBridgeIsidFdbRemoteMacBVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the BVlan ID for this
|
|
MAC address if it is learnt remotely
|
|
Otherwise a value of 0 is displayed."
|
|
DEFVAL { 0 }
|
|
::= { rcBridgeIsidFdbEntry 7 }
|
|
|
|
rcBridgeIsidFdbRemoteMacDestSysName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Primary System name of the node where MAC
|
|
address entry in case of remote otherwise
|
|
NULL is shown."
|
|
DEFVAL {""}
|
|
::= { rcBridgeIsidFdbEntry 8 }
|
|
|
|
rcBridgeIsidFdbCvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to identify customer vid of the switched uni port
|
|
of this entry is associated with. 4095 is not used. 4096
|
|
is reserved for untagged case "
|
|
::= { rcBridgeIsidFdbEntry 9}
|
|
|
|
--rcBridgeVnidFdbTable
|
|
rcBridgeVnidFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcBridgeVnidFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to store all the mac entries that are learned
|
|
on the given vnid.This gives both the locally learnt
|
|
and remote mac entries. "
|
|
::= { rcBridge 24 }
|
|
|
|
rcBridgeVnidFdbEntry OBJECT-TYPE
|
|
SYNTAX RcBridgeVnidFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about a MAC address for
|
|
which the bridge has the forwarding information."
|
|
INDEX { rcBridgeVnidFdbVnid, rcBridgeVnidFdbAddress}
|
|
::= { rcBridgeVnidFdbTable 1 }
|
|
|
|
RcBridgeVnidFdbEntry ::= SEQUENCE {
|
|
rcBridgeVnidFdbVnid Integer32,
|
|
rcBridgeVnidFdbAddress MacAddress,
|
|
rcBridgeVnidFdbStatus INTEGER,
|
|
rcBridgeVnidFdbInterfaceIndex InterfaceIndex,
|
|
rcBridgeVnidFdbType INTEGER
|
|
}
|
|
|
|
rcBridgeVnidFdbVnid OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to identify the vnid value uniquely for the
|
|
MAC address."
|
|
::= { rcBridgeVnidFdbEntry 1 }
|
|
|
|
rcBridgeVnidFdbAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unicast MAC address for which the bridge
|
|
has forwarding and/or filtering information."
|
|
::= { rcBridgeVnidFdbEntry 2 }
|
|
|
|
rcBridgeVnidFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the status of this entry."
|
|
::= { rcBridgeVnidFdbEntry 3 }
|
|
|
|
rcBridgeVnidFdbInterfaceIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IfIndex of the interface
|
|
on which a frame having a source address
|
|
equal to the value of the corresponding instance
|
|
of rcBridgeVnidFdbAddress has been learnt."
|
|
::= { rcBridgeVnidFdbEntry 4 }
|
|
|
|
rcBridgeVnidFdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
remote(2),
|
|
ist-peer(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the whether the
|
|
rcBridgeVnidFdbAddress is learnt locally or
|
|
learnt on NNI from a remote destination."
|
|
::= { rcBridgeVnidFdbEntry 5 }
|
|
|
|
-- rcBoot Group
|
|
|
|
rcBootFlashSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "BootFlashSwVersion indicates the software
|
|
version in the Flash."
|
|
::= { rcBoot 1 }
|
|
|
|
rcBootPcmciaSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "BootPcmciaSwVersion indicate the software
|
|
version in the Pcmcia card."
|
|
::= { rcBoot 2 }
|
|
|
|
|
|
rcBootLastBootSource OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Indicates the boot source of the last
|
|
the system boot."
|
|
::= { rcBoot 3 }
|
|
|
|
rcBootPrimary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1),
|
|
pcmcia(2),
|
|
net(3),
|
|
skip(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "BootPrimary is indicator for the
|
|
primary source to boot the system."
|
|
DEFVAL { flash }
|
|
::= { rcBoot 4 }
|
|
|
|
rcBootSecondary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1),
|
|
pcmcia(2),
|
|
net(3),
|
|
skip(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "BootSecondary indicates the second choice
|
|
of the boot source."
|
|
DEFVAL { pcmcia }
|
|
::= { rcBoot 5 }
|
|
|
|
rcBootTertiary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1),
|
|
pcmcia(2),
|
|
net(3),
|
|
skip(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "BootTertiary indicates the third choice
|
|
of boot source."
|
|
DEFVAL { net }
|
|
::= { rcBoot 6 }
|
|
|
|
|
|
-- rcDevice Group
|
|
rcDeviceLastBootSource OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the source of the software
|
|
image the system was last booted with."
|
|
::= { rcDevice 1 }
|
|
|
|
rcDevicePrimarySource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1),
|
|
pcmcia(2),
|
|
net(3),
|
|
skip(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the primary choice to get
|
|
a system software image."
|
|
::= { rcDevice 2 }
|
|
|
|
rcDevicePrimarySourceFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate a file number, if applicable."
|
|
::= { rcDevice 3 }
|
|
|
|
rcDeviceSecondarySource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1),
|
|
pcmcia(2),
|
|
net(3),
|
|
skip(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the secondary choice to get
|
|
a system software image."
|
|
::= { rcDevice 4 }
|
|
|
|
rcDeviceSecondarySourceFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate a file name, if applicable."
|
|
::= { rcDevice 5 }
|
|
|
|
rcDeviceTertiarySource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1),
|
|
pcmcia(2),
|
|
net(3),
|
|
skip(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the tertiary choice to get
|
|
a system software image."
|
|
::= { rcDevice 6 }
|
|
|
|
rcDeviceTertiarySourceFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate a file name, if applicable."
|
|
::= { rcDevice 7 }
|
|
|
|
rcDeviceConfigSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1),
|
|
pcmcia(2),
|
|
nvram(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the location to get a system
|
|
configuration file during system boot."
|
|
::= { rcDevice 8 }
|
|
|
|
rcDeviceConfigSourceFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate a file name, if applicable."
|
|
::= { rcDevice 9 }
|
|
|
|
rcDeviceFlashBytesUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of bytes used in the
|
|
system's configuration flash device."
|
|
::= { rcDevice 10 }
|
|
|
|
rcDeviceFlashBytesFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of bytes available in
|
|
the system's configuration flash device."
|
|
::= { rcDevice 11 }
|
|
|
|
rcDevicePcmciaBytesUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of bytes used in the
|
|
system's PCMCIA device."
|
|
::= { rcDevice 12 }
|
|
|
|
rcDevicePcmciaBytesFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of bytes available in
|
|
the system's PCMCIA device."
|
|
::= { rcDevice 13 }
|
|
|
|
rcDeviceAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
squeezeFlash(2),
|
|
squeezePcmcia(3),
|
|
formatFlash(4),
|
|
formatPcmcia(5),
|
|
recoverFlash(6),
|
|
recoverPcmcia(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to specify a particular action to perform on
|
|
one of the system's device."
|
|
::= { rcDevice 14 }
|
|
|
|
rcDeviceResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
inProgress(2),
|
|
success(3),
|
|
fail(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the result of the last action
|
|
performed on one of the system's device."
|
|
::= { rcDevice 15 }
|
|
|
|
rcDeviceFlashNumFiles OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of files available in
|
|
the system's configuration flash device."
|
|
::= { rcDevice 16 }
|
|
|
|
rcDevicePcmciaNumFiles OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the number of files available in
|
|
the system's PCMCIA device."
|
|
::= { rcDevice 17 }
|
|
|
|
|
|
-- The Device Flash Table
|
|
|
|
rcDeviceFlashTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDeviceFlashEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Flash table."
|
|
::= { rcDevice 25 }
|
|
|
|
rcDeviceFlashEntry OBJECT-TYPE
|
|
SYNTAX RcDeviceFlashEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry in the system's flash table."
|
|
INDEX { rcDeviceFlashFileNum }
|
|
::= { rcDeviceFlashTable 1 }
|
|
|
|
RcDeviceFlashEntry ::=
|
|
SEQUENCE {
|
|
rcDeviceFlashFileNum INTEGER,
|
|
rcDeviceFlashFileName DisplayString,
|
|
rcDeviceFlashFileVersion DisplayString,
|
|
rcDeviceFlashFileType INTEGER,
|
|
rcDeviceFlashFileMode INTEGER,
|
|
rcDeviceFlashFileSize Integer32,
|
|
rcDeviceFlashFileCrc Integer32,
|
|
rcDeviceFlashFileStatus INTEGER,
|
|
rcDeviceFlashRowStatus RowStatus
|
|
}
|
|
|
|
rcDeviceFlashFileNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate a particular file in flash."
|
|
::= { rcDeviceFlashEntry 1 }
|
|
|
|
rcDeviceFlashFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate a flash file's name."
|
|
::= { rcDeviceFlashEntry 2 }
|
|
|
|
rcDeviceFlashFileVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the flash file's version."
|
|
::= { rcDeviceFlashEntry 3 }
|
|
|
|
rcDeviceFlashFileType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(1),
|
|
log(2),
|
|
trace(3),
|
|
executable(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the flash file's type."
|
|
::= { rcDeviceFlashEntry 4 }
|
|
|
|
rcDeviceFlashFileMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
compressed(1),
|
|
uncompressed(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the flash file's mode."
|
|
::= { rcDeviceFlashEntry 5 }
|
|
|
|
rcDeviceFlashFileSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the flash file's size."
|
|
::= { rcDeviceFlashEntry 6 }
|
|
|
|
rcDeviceFlashFileCrc OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the flash file's CRC."
|
|
::= { rcDeviceFlashEntry 7 }
|
|
|
|
rcDeviceFlashFileStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
deleted(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the flash file's status.
|
|
A file that has been marked for deletion, but
|
|
who's space has not been reclaimed yet is marked
|
|
as 'deleted'."
|
|
::= { rcDeviceFlashEntry 8 }
|
|
|
|
rcDeviceFlashRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status."
|
|
::= { rcDeviceFlashEntry 9 }
|
|
|
|
|
|
-- The Device Pcmcia Table
|
|
|
|
rcDevicePcmciaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDevicePcmciaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "PCMCIA table."
|
|
::= { rcDevice 26 }
|
|
|
|
rcDevicePcmciaEntry OBJECT-TYPE
|
|
SYNTAX RcDevicePcmciaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry in the system's PCMCIA table."
|
|
INDEX { rcDevicePcmciaFileNum }
|
|
::= { rcDevicePcmciaTable 1 }
|
|
|
|
RcDevicePcmciaEntry ::=
|
|
SEQUENCE {
|
|
rcDevicePcmciaFileNum INTEGER,
|
|
rcDevicePcmciaFileName DisplayString,
|
|
rcDevicePcmciaFileVersion DisplayString,
|
|
rcDevicePcmciaFileType INTEGER,
|
|
rcDevicePcmciaFileMode INTEGER,
|
|
rcDevicePcmciaFileSize Integer32,
|
|
rcDevicePcmciaFileCrc Integer32,
|
|
rcDevicePcmciaFileStatus INTEGER,
|
|
rcDevicePcmciaRowStatus RowStatus
|
|
}
|
|
|
|
rcDevicePcmciaFileNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate a particular file in PCMCIA."
|
|
::= { rcDevicePcmciaEntry 1 }
|
|
|
|
rcDevicePcmciaFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the PCMCIA file's name."
|
|
::= { rcDevicePcmciaEntry 2 }
|
|
|
|
rcDevicePcmciaFileVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the PCMCIA file's version."
|
|
::= { rcDevicePcmciaEntry 3 }
|
|
|
|
rcDevicePcmciaFileType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(1),
|
|
log(2),
|
|
trace(3),
|
|
executable(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the PCMCIA file's type."
|
|
::= { rcDevicePcmciaEntry 4 }
|
|
|
|
rcDevicePcmciaFileMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
compressed(1),
|
|
uncompressed(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate a particular file in mode."
|
|
::= { rcDevicePcmciaEntry 5 }
|
|
|
|
rcDevicePcmciaFileSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the PCMCIA file's size."
|
|
::= { rcDevicePcmciaEntry 6 }
|
|
|
|
rcDevicePcmciaFileCrc OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the PCMCIA file's CRC."
|
|
::= { rcDevicePcmciaEntry 7 }
|
|
|
|
rcDevicePcmciaFileStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
deleted(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the PCMCIA file's status.
|
|
A file that has been marked for deletion, but
|
|
who's space has not been reclaimed yet is marked
|
|
as 'deleted'."
|
|
::= { rcDevicePcmciaEntry 8 }
|
|
|
|
rcDevicePcmciaRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Row status."
|
|
::= { rcDevicePcmciaEntry 9 }
|
|
|
|
|
|
-- Multi-Link Trunking Table
|
|
|
|
rcMltNumMlts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of MLTs currently defined in the switch."
|
|
::= { rcMlt 1 }
|
|
|
|
rcMltPotentialMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are not members of any MLT."
|
|
::= { rcMlt 2 }
|
|
|
|
rcMltIstSessionEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable mlt functionality."
|
|
::= { rcMlt 3 }
|
|
|
|
rcMltIstSessionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable mlt functionality."
|
|
::= { rcMlt 4 }
|
|
|
|
rcMltIstPeerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IST mlt Peer Ip address."
|
|
::= { rcMlt 5 }
|
|
|
|
rcMltIstVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IST mlt Vlan Id. 0 is default when it
|
|
is not set, VSP supports 0 to 4084"
|
|
::= { rcMlt 6 }
|
|
|
|
rcMltDisablePortsOnShutdown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When true(1), the port members of an MLT will be
|
|
automatically shutdown when the MLT becomes disabled."
|
|
::= { rcMlt 7 }
|
|
|
|
|
|
rcMltTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of Multi-Link Trunk entries. The number of
|
|
entries is given by rcMltNumMlts."
|
|
::= { rcMlt 10 }
|
|
|
|
rcMltEntry OBJECT-TYPE
|
|
SYNTAX RcMltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular Multi-Link Trunk."
|
|
INDEX { rcMltId }
|
|
::= { rcMltTable 1 }
|
|
|
|
RcMltEntry ::= SEQUENCE {
|
|
rcMltId INTEGER,
|
|
rcMltName DisplayString,
|
|
rcMltPortMembers PortSet,
|
|
rcMltPortType INTEGER,
|
|
rcMltNumVlanIds Integer32,
|
|
rcMltVlanIds IdList,
|
|
rcMltRowStatus RowStatus,
|
|
rcMltEnable TruthValue,
|
|
rcMltLoadBalance TruthValue,
|
|
rcMltDistributionAlgorithm INTEGER,
|
|
rcMltIfIndex InterfaceIndex,
|
|
rcMltMltType INTEGER,
|
|
rcMltSmltId INTEGER,
|
|
rcMltRunningType INTEGER,
|
|
rcMltSvlanPortType INTEGER,
|
|
rcMltMulticastDistribution EnableValue,
|
|
rcMltLacp10gBackup EnableValue,
|
|
rcMltAggregatable EnableValue,
|
|
rcMltClearLinkAggregate INTEGER,
|
|
rcMltNtStgEnable TruthValue,
|
|
rcMltDesignatedPort InterfaceIndex,
|
|
rcMltAggOperState EnableValue,
|
|
rcMltAggTimeOfLastOperChange TimeTicks,
|
|
rcMltVplsMgmtVlan EnableValue,
|
|
rcMltLoadDistributionOption INTEGER,
|
|
rcMltUniAggrMacIdx Integer32,
|
|
rcMltUniAggrMacAddress MacAddress,
|
|
rcMltQinqEtherType Integer32,
|
|
rcMltEgressCosProfileName DisplayString,
|
|
rcMltEgressPolicerAdminState EnableValue,
|
|
rcMltAggrEgressBandwidth EnableValue,
|
|
rcMltAggrIngressBandwidth EnableValue,
|
|
rcMltAggrMacAlloc EnableValue,
|
|
rcMltAggMinLink Integer32,
|
|
rcMltMtu Integer32,
|
|
rcMltInterfaceType INTEGER,
|
|
rcMltConfiguredMembers PortSet,
|
|
rcMltMtuAdminState EnableValue,
|
|
rcMltPeerPortMembers PortSet,
|
|
rcMltCpLimitPktRate INTEGER,
|
|
rcMltCpLimitShutDownEnable TruthValue,
|
|
rcMltVlanIdList OCTET STRING,
|
|
rcMltEntryOwner INTEGER,
|
|
rcMltDatapathProgrammingState INTEGER,
|
|
rcMltL4Hash EnableValue,
|
|
rcMltPrivateVlanType INTEGER,
|
|
rcMltBpduMode INTEGER,
|
|
rcMltPeerPortMembersList DisplayString,
|
|
rcMltFlexUniEnable TruthValue
|
|
}
|
|
|
|
rcMltId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..512)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Multi-Link
|
|
Trunk associated with this entry."
|
|
::= { rcMltEntry 1 }
|
|
|
|
rcMltName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this MLT."
|
|
::= { rcMltEntry 2 }
|
|
|
|
rcMltPortMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are members of this MLT."
|
|
::= { rcMltEntry 3 }
|
|
|
|
rcMltPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
access(1), -- access port type
|
|
trunk(2) -- trunk port type
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of MLT port: access(1) or trunk(2)."
|
|
DEFVAL { access }
|
|
::= { rcMltEntry 4 }
|
|
|
|
rcMltNumVlanIds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of VLAN IDs that
|
|
are stored in the rcMltVlanIds variable."
|
|
::= { rcMltEntry 5 }
|
|
|
|
rcMltVlanIds OBJECT-TYPE
|
|
SYNTAX IdList (SIZE (8192))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An array used to identify which VLANs this MLT
|
|
is associated with. Each VLAN ID is stored as a
|
|
two octet value. The first octet in the pair holds
|
|
bits 15-8 of the VLAN ID, while the second octet
|
|
holds bits 7-0 of the VLAN ID.
|
|
This object is now replaced by rcMltVlanIdList."
|
|
::= { rcMltEntry 6 }
|
|
|
|
rcMltRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcMltTable."
|
|
::= { rcMltEntry 7 }
|
|
|
|
rcMltEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Enable the entry."
|
|
DEFVAL { true }
|
|
::= { rcMltEntry 8 }
|
|
|
|
rcMltLoadBalance OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Perform load balance?"
|
|
DEFVAL { false }
|
|
::= { rcMltEntry 9 }
|
|
|
|
rcMltDistributionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
basic(2),
|
|
advanced(3),
|
|
enhanced(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "none(1), ... It will be fill later"
|
|
DEFVAL { none }
|
|
::= { rcMltEntry 10 }
|
|
|
|
rcMltIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the 'logical' ifIndex assigned to
|
|
this MLT."
|
|
::= { rcMltEntry 11 }
|
|
|
|
rcMltMltType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normalMLT(1),
|
|
istMLT(2),
|
|
splitMLT(3),
|
|
virtualIstMLT(4) --Used only when spbm-config-mode flag disabled
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MLT type."
|
|
::= { rcMltEntry 12 }
|
|
|
|
rcMltSmltId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..512)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Split MLT id."
|
|
::= { rcMltEntry 13 }
|
|
|
|
rcMltRunningType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normalMLT(1),
|
|
istMLT(2),
|
|
splitMLT(3),
|
|
virtualIstMLT(4) --Used only when spbm-config-mode flag disabled
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Split MLT running type."
|
|
::= { rcMltEntry 14 }
|
|
|
|
rcMltSvlanPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
uni(2),
|
|
nni(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set MLT port type."
|
|
DEFVAL { normal }
|
|
::= { rcMltEntry 15 }
|
|
|
|
rcMltMulticastDistribution OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable multicast distribution per mlt."
|
|
DEFVAL { disable }
|
|
::= { rcMltEntry 16 }
|
|
|
|
rcMltLacp10gBackup OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable 10G Mlt reliance backup mode."
|
|
DEFVAL { disable }
|
|
::= { rcMltEntry 17 }
|
|
|
|
rcMltAggregatable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable link aggregation on a MLT."
|
|
DEFVAL { disable }
|
|
::= { rcMltEntry 18 }
|
|
|
|
rcMltClearLinkAggregate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1),
|
|
none(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "clear link aggregate, equivalent to disable and
|
|
re-enable aggregatable on the MLT."
|
|
::= { rcMltEntry 19 }
|
|
|
|
rcMltNtStgEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether this MLT is operating in
|
|
Nortel Mode or in Cisco Mode.
|
|
true = Nortel Mode
|
|
false = Cisco Mode."
|
|
DEFVAL { true }
|
|
::= { rcMltEntry 20 }
|
|
|
|
rcMltDesignatedPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Designated port for the MLT."
|
|
::= { rcMltEntry 21 }
|
|
|
|
rcMltAggOperState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Link aggregation state on a MLT."
|
|
::= { rcMltEntry 22 }
|
|
|
|
rcMltAggTimeOfLastOperChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value since the interface entered its
|
|
current operational state."
|
|
::= { rcMltEntry 23 }
|
|
|
|
rcMltVplsMgmtVlan OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Management Vlan is configured on this mlt"
|
|
DEFVAL { disable }
|
|
::= { rcMltEntry 24 }
|
|
|
|
rcMltLoadDistributionOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bmac(1),
|
|
cmac(2),
|
|
bvid(3),
|
|
isid(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the Load Balancing option for MLT in UNI"
|
|
DEFVAL { bmac }
|
|
::= { rcMltEntry 25 }
|
|
|
|
rcMltUniAggrMacIdx OBJECT-TYPE
|
|
SYNTAX Integer32 (0..448)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the index of the mac address pool reserved for MLT uni"
|
|
DEFVAL { 0 }
|
|
::= { rcMltEntry 26 }
|
|
|
|
rcMltUniAggrMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to display the mac address reserved for this MLT"
|
|
::= { rcMltEntry 27 }
|
|
|
|
rcMltQinqEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The qinq ether type value. It should be displayed
|
|
and input as Hex value. It would only be used when
|
|
MLT is associated with QnQ service UNI. Otherwise,
|
|
it would be ignored"
|
|
DEFVAL { '8020'h }
|
|
::= { rcMltEntry 28 }
|
|
rcMltEgressCosProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Mlt Egress COS Profile Name, which is defined by
|
|
rcCosProfileTable"
|
|
DEFVAL { "DEFAULT_PORT_PROFILE" }
|
|
::= { rcMltEntry 29 }
|
|
|
|
rcMltEgressPolicerAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Mlt Egress Policer"
|
|
DEFVAL { disable }
|
|
::= { rcMltEntry 30 }
|
|
|
|
rcMltAggrEgressBandwidth OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Aggregated Egress Bandwidth Policer is used."
|
|
DEFVAL { enable }
|
|
::= { rcMltEntry 31 }
|
|
|
|
rcMltAggrIngressBandwidth OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Aggregated Ingress Bandwidth Policer is used."
|
|
DEFVAL { enable }
|
|
::= { rcMltEntry 32 }
|
|
|
|
rcMltAggrMacAlloc OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Aggregated Mac Allocation is used"
|
|
DEFVAL { disable }
|
|
::= { rcMltEntry 33 }
|
|
|
|
rcMltAggMinLink OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "If number of active links goes below configured
|
|
minimum-link number, the entire LAG is declared
|
|
down."
|
|
::= { rcMltEntry 34 }
|
|
|
|
rcMltMtu OBJECT-TYPE
|
|
SYNTAX Integer32 (1518..9600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "MTU for ports in Mlt"
|
|
DEFVAL { 1518 }
|
|
::= { rcMltEntry 35 }
|
|
|
|
rcMltInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
silent(2),
|
|
uni(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This value indicates whether ports in the mlt are of type
|
|
<normal/silent/uni>. A port can be included in any EVPN
|
|
service only if this attribute is set to uni. If the port
|
|
is not part of any VLAN the interface-type is set to silent.
|
|
Before adding a port to a VLAN the interface type should
|
|
be changed to normal."
|
|
DEFVAL { silent }
|
|
::= { rcMltEntry 36 }
|
|
|
|
rcMltConfiguredMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are configured members of this MLT.
|
|
Toronto release allows us to add a port to a LACP enabled
|
|
MLT. These port get added as ConfiguredMembers"
|
|
::= { rcMltEntry 37 }
|
|
|
|
rcMltMtuAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Set Mlt MTU enable or disable"
|
|
DEFVAL { disable }
|
|
::= { rcMltEntry 38 }
|
|
|
|
rcMltPeerPortMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The set of Peer ports which are connected to local ports
|
|
(rcMltPortMember) of this MLT.
|
|
This object has been deprecated/obsolete by object rcMltPeerPortMembersList"
|
|
::= { rcMltEntry 39 }
|
|
|
|
rcMltCpLimitPktRate OBJECT-TYPE
|
|
SYNTAX INTEGER(1000..20000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to limit Control packets on the
|
|
port to qos-levels 6 and 7.
|
|
Sets the limit in packets per second."
|
|
DEFVAL { 8000 }
|
|
::= { rcMltEntry 40 }
|
|
|
|
rcMltCpLimitShutDownEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate if the mlt-ports should be
|
|
shutdown when the CpLimitPktRate is exceeded."
|
|
DEFVAL { false }
|
|
::= { rcMltEntry 41 }
|
|
|
|
rcMltVlanIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..512))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This bitfield is used to identify which VLANs this MLT
|
|
is associated with. Each VLAN ID is stored as a bit.
|
|
The most-significant (left-most) bit represents Vlan Id 1."
|
|
::= { rcMltEntry 42 }
|
|
|
|
rcMltEntryOwner OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
local(2),
|
|
remote(3),
|
|
localAndRemote(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Defines the owner of the MLT."
|
|
::= { rcMltEntry 43 }
|
|
|
|
rcMltDatapathProgrammingState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
local(2),
|
|
remote(3),
|
|
localAndRemote(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Defines the datapath programming state of
|
|
the MLT."
|
|
::= { rcMltEntry 44 }
|
|
|
|
rcMltL4Hash OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "If enabled all the non fragmented L4 packets will
|
|
take L4 hashing and all the fragmented L4 packets
|
|
and L3 packets will take L3 hashing. If disabled
|
|
then both L3 and L4 packets will take L3 hashing.
|
|
It is introduce by release 5.1.6.0"
|
|
DEFVAL { disable }
|
|
::= { rcMltEntry 45 }
|
|
|
|
rcMltPrivateVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
trunk(1),
|
|
isolated(2),
|
|
promiscuous(3),
|
|
none(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The mode used when private VLAN is associated with MLT.
|
|
If the VLAN is not private then this is ignored.
|
|
If the VLAN is private then the value must be
|
|
either trunk, isolated, or promiscuous. Setting
|
|
the value to trunk will enable tagging. Setting
|
|
the value to isolated or promiscuous will remove
|
|
non-private VLANs from the mlt."
|
|
DEFVAL { none }
|
|
::= { rcMltEntry 46 }
|
|
|
|
rcMltBpduMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all-ports(1),
|
|
single-port(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the BPDU send/receive mode:
|
|
send/receive BPDUs on all trunk ports (1) or
|
|
on a single trunk port (2)."
|
|
DEFVAL { all-ports }
|
|
::= { rcMltEntry 47 }
|
|
|
|
rcMltPeerPortMembersList OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A list of peer ports in the display format slot/port,slot/port/sub-port.
|
|
A port display format cannot be always hardcoded as slot/port. It depends
|
|
on the dynamic setting of the port, such as channelized.
|
|
This object is used to deprecate/obsolete the object of rcMltPeerPortMembers."
|
|
::= { rcMltEntry 48}
|
|
|
|
rcMltFlexUniEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to set FLEX UNI enable/disable on mlt"
|
|
DEFVAL { false }
|
|
::= { rcMltEntry 49 }
|
|
|
|
rcMltMcastDistribution OBJECT IDENTIFIER ::= { rcMlt 11 }
|
|
|
|
rcMltMcastDistributionEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable this feature to
|
|
distribute multicast traffic on MLT ports. All
|
|
the cards in the system must be E-Tickets.
|
|
Cannot perform distribution in a mixed mode."
|
|
::= { rcMltMcastDistribution 1 }
|
|
|
|
rcMltMcastDistributionGrpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Group Mask. Create a MLT abstraction layer to
|
|
distribute traffic basd on (source, group) information
|
|
of the multicast packet. The algorithm to pick
|
|
the actual port nedds to generate a fairly random
|
|
number for different combinations but a lways generate
|
|
the same number for a given (source, group) pair. By
|
|
default, the number of active ports of the MLT is used
|
|
to MOD the pseudo-random number generated by the XOR
|
|
of each byte of the masked group address with the
|
|
masked source address."
|
|
::= { rcMltMcastDistribution 2 }
|
|
|
|
rcMltMcastDistributionSrcMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source Mask."
|
|
::= { rcMltMcastDistribution 3 }
|
|
|
|
rcMltMcastDistributionRedistributionEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable redistribution."
|
|
::= { rcMltMcastDistribution 4 }
|
|
|
|
-- Single Link Trunk Port Table
|
|
|
|
rcSltPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSltPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcMlt 12 }
|
|
|
|
rcSltPortEntry OBJECT-TYPE
|
|
SYNTAX RcSltPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular Multi-Link Trunk."
|
|
INDEX { rcSltPortIfIndex }
|
|
::= { rcSltPortTable 1 }
|
|
|
|
RcSltPortEntry ::= SEQUENCE {
|
|
rcSltPortIfIndex InterfaceIndex,
|
|
rcSltPortSmltId INTEGER,
|
|
rcSltPortOperType INTEGER,
|
|
rcSltPortRowStatus RowStatus
|
|
}
|
|
|
|
rcSltPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An interface for this SLT."
|
|
::= { rcSltPortEntry 1 }
|
|
|
|
rcSltPortSmltId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..512)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A uniquely identifies the Single-Link
|
|
Trunk associated with this entry."
|
|
::= { rcSltPortEntry 2 }
|
|
|
|
rcSltPortOperType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
smlt(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operate type of the port normal
|
|
or smlt."
|
|
::= { rcSltPortEntry 3 }
|
|
|
|
rcSltPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries of the Table."
|
|
::= { rcSltPortEntry 4 }
|
|
|
|
-- rcMltVlacpTable
|
|
|
|
rcMltVlacpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMltVlacpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mlt Virtual LACP table"
|
|
::= { rcMlt 13 }
|
|
|
|
rcMltVlacpEntry OBJECT-TYPE
|
|
SYNTAX RcMltVlacpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular port"
|
|
INDEX { rcMltId }
|
|
::= { rcMltVlacpTable 1 }
|
|
|
|
RcMltVlacpEntry ::= SEQUENCE {
|
|
rcMltVlacpAdminEnable TruthValue,
|
|
rcMltVlacpFastPeriodicTimer Integer32,
|
|
rcMltVlacpTimeoutScale Integer32,
|
|
rcMltVlacpEtherMacAddress MacAddress,
|
|
rcMltVlacpDualHomingEnable TruthValue
|
|
}
|
|
|
|
rcMltVlacpAdminEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administratively enable/disable Virtual LACP on a MLT"
|
|
DEFVAL { false }
|
|
::= { rcMltVlacpEntry 1 }
|
|
|
|
rcMltVlacpFastPeriodicTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of miliseconds between periodic transmissions
|
|
using Short Timeouts"
|
|
DEFVAL { 250 }
|
|
::= { rcMltVlacpEntry 2 }
|
|
|
|
rcMltVlacpTimeoutScale OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Scalar value used to calculate timeout time from
|
|
periodic time. Timeout = PeriodicTime * TimeoutScale"
|
|
DEFVAL { 3 }
|
|
::= { rcMltVlacpEntry 3 }
|
|
|
|
rcMltVlacpEtherMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Multicast Mac Address exclusively used for VLACPDU's"
|
|
::= { rcMltVlacpEntry 4 }
|
|
|
|
rcMltVlacpDualHomingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Dual homing on Virtual LACP on a MLT"
|
|
DEFVAL { false }
|
|
::= { rcMltVlacpEntry 5 }
|
|
|
|
-- rcMltBvidPortTable related information starts here
|
|
|
|
rcMltBvidPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMltBvidPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table contains Bridge Vlan configured information for
|
|
Primary and Secondary ports for MLT-UNI"
|
|
::= { rcMlt 14 }
|
|
|
|
rcMltBvidPortEntry OBJECT-TYPE
|
|
SYNTAX RcMltBvidPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry with Info about VLAN with its Primary and secondary ports for MLT-UNI"
|
|
INDEX { rcMltBvidMltId, rcMltBvidVlanId}
|
|
::= { rcMltBvidPortTable 1 }
|
|
|
|
RcMltBvidPortEntry ::= SEQUENCE {
|
|
rcMltBvidMltId Integer32,
|
|
rcMltBvidVlanId Integer32,
|
|
rcMltBvidPrimaryPort InterfaceIndex,
|
|
rcMltBvidSecondaryPort InterfaceIndex,
|
|
rcMltBvidRowStatus RowStatus
|
|
}
|
|
|
|
rcMltBvidMltId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..256)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "VLAN ID of the Port List"
|
|
::= { rcMltBvidPortEntry 1 }
|
|
|
|
rcMltBvidVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "VLAN ID of the Port List"
|
|
::= { rcMltBvidPortEntry 2 }
|
|
|
|
rcMltBvidPrimaryPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Primary port of the MLT for the VLAN when load distribution option is b-vid"
|
|
::= { rcMltBvidPortEntry 3 }
|
|
|
|
rcMltBvidSecondaryPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Secondary port of the MLT for the VLAN when load distribution option is b-vid "
|
|
::= { rcMltBvidPortEntry 4 }
|
|
|
|
rcMltBvidRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to Add/delete entries in the table"
|
|
::= { rcMltBvidPortEntry 5 }
|
|
|
|
-- rcMltBvidPortTable related information ends here
|
|
|
|
rcMltNotificationObjects OBJECT IDENTIFIER ::= { rcMlt 15 }
|
|
|
|
rcMltAggTrapEvent OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
localdown(1),
|
|
remotedown(2),
|
|
up(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "It indicates three trap events: local down(1),
|
|
remote down(2), up(3)."
|
|
::= { rcMltNotificationObjects 1 }
|
|
|
|
rcMltIstStpEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable mlt ist stp functionality."
|
|
DEFVAL { disable }
|
|
::= { rcMlt 16 }
|
|
|
|
-- rcWeb related information
|
|
|
|
rcWebEnableServer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Control whether the web server should be enabled.
|
|
Setting this variable to true will make the server
|
|
operational. Setting this variable to false will
|
|
disable server."
|
|
DEFVAL { false }
|
|
::= { rcWeb 1 }
|
|
|
|
rcWebRWAUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the read-write-all web-server account."
|
|
::= { rcWeb 2 }
|
|
|
|
rcWebRWAPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the read-write-all web-server account."
|
|
::= { rcWeb 3 }
|
|
|
|
rcWebRWUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the read-write web-server account."
|
|
::= { rcWeb 4 }
|
|
|
|
rcWebRWPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the read-write web-server account."
|
|
::= { rcWeb 5 }
|
|
|
|
rcWebROUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the read-only web-server account."
|
|
::= { rcWeb 6 }
|
|
|
|
rcWebROPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the read-only web-server account."
|
|
::= { rcWeb 7 }
|
|
|
|
rcWebLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Last web-browser initiated configuration
|
|
change since sysUpTime."
|
|
::= { rcWeb 8 }
|
|
|
|
rcWebNumHits OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of hits to the web-server"
|
|
::= { rcWeb 9 }
|
|
|
|
rcWebNumAccessChecks OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of access checks performed by the web-server"
|
|
::= { rcWeb 10 }
|
|
|
|
rcWebNumAccessBlocks OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of accesses blocked by the web-server"
|
|
::= { rcWeb 11 }
|
|
|
|
rcWebNumRxErrors OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of receive errors encountered by the web-server"
|
|
::= { rcWeb 12 }
|
|
|
|
rcWebNumTxErrors OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of transmit errors encountered by the web-server"
|
|
::= { rcWeb 13 }
|
|
|
|
rcWebNumSetRequest OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of set-request to the web-server"
|
|
::= { rcWeb 14 }
|
|
|
|
rcWebPrimaryHtmlSourceDir OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "primary html source directory"
|
|
DEFVAL { "local" }
|
|
::= { rcWeb 15 }
|
|
|
|
rcWebSecondaryHtmlSourceDir OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "secondary html source directory"
|
|
DEFVAL { "pcmcia" }
|
|
::= { rcWeb 16 }
|
|
|
|
rcWebTertiaryHtmlSourceDir OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "tertiary html source directory"
|
|
::= { rcWeb 17 }
|
|
|
|
rcWebRWL3UserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "user name for the L3 web server account"
|
|
::= { rcWeb 18 }
|
|
|
|
rcWebRWL3Password OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "password for the L3 web server account"
|
|
::= { rcWeb 19 }
|
|
|
|
rcWebRWL2UserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "user name for the L2 web server account"
|
|
::= { rcWeb 20 }
|
|
|
|
rcWebRWL2Password OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "password for the L2 web server account"
|
|
::= { rcWeb 21 }
|
|
|
|
rcWebDefaultDisplayRows OBJECT-TYPE
|
|
SYNTAX INTEGER (10..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "default display rows in html page."
|
|
DEFVAL { 48 }
|
|
::= { rcWeb 22 }
|
|
|
|
rcWebLastHostAccessBlocked OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "last host access blocked"
|
|
::= { rcWeb 23 }
|
|
|
|
rcWebHelpTftpSourceDir OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "tftp source directory for help files"
|
|
::= { rcWeb 24 }
|
|
|
|
rcWebHttpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..49151)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "the HTTP port for web access"
|
|
DEFVAL { 80 }
|
|
::= { rcWeb 25 }
|
|
|
|
rcWebSecureOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Control whether the secure only should be enabled.
|
|
Setting this variable to true will make the server support HTTPS only.
|
|
Setting this variable to false will make the server support both HTTP & HTTPS"
|
|
DEFVAL { true }
|
|
::= { rcWeb 26 }
|
|
|
|
rcWebHttpsPort OBJECT-TYPE
|
|
SYNTAX Integer32 (443 | 1024..49151)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "the HTTPs port for web access"
|
|
DEFVAL { 443 }
|
|
::= { rcWeb 27 }
|
|
|
|
rcWebLastHostAccessBlockedAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Address type (IPv4/IPv6) of last host access blocked"
|
|
::= { rcWeb 28 }
|
|
|
|
rcWebLastHostAccessBlockedAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "last host access blocked"
|
|
::= { rcWeb 29 }
|
|
|
|
rcWebInactivityTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32(30..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the amount of idle time, in
|
|
seconds towait before timing out EDM login
|
|
sessions."
|
|
DEFVAL { 900 }
|
|
::= { rcWeb 30 }
|
|
|
|
rcWebTlsMinimumVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tlsv10(1),
|
|
tlsv11(2),
|
|
tlsv12(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the minimum version of TLS protocol supported by the Web Server.
|
|
tlsv10 sets the version to 1.0.
|
|
tlsv11 sets the version to 1.1.
|
|
tlsv12 sets the version to 1.2."
|
|
DEFVAL { tlsv12 }
|
|
::= { rcWeb 31 }
|
|
|
|
rcWebMinimumPasswordLength OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Minimum length password for web user"
|
|
::= { rcWeb 32 }
|
|
|
|
-- rcCli related information
|
|
|
|
rcCliRWAUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the read-write-all CLI account."
|
|
::= { rcCli 1 }
|
|
|
|
rcCliRWAPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the read-write-all CLI account."
|
|
::= { rcCli 2 }
|
|
|
|
rcCliRWUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the read-write CLI account."
|
|
::= { rcCli 3 }
|
|
|
|
rcCliRWPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the read-write CLI account."
|
|
::= { rcCli 4 }
|
|
|
|
rcCliRWL3UserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the read-write layer-3 CLI account."
|
|
::= { rcCli 5 }
|
|
|
|
rcCliRWL3Password OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the read-write layer-3 CLI account."
|
|
::= { rcCli 6 }
|
|
|
|
rcCliRWL2UserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the read-write layer-2 CLI account."
|
|
::= { rcCli 7 }
|
|
|
|
rcCliRWL2Password OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the read-write layer-2 CLI account."
|
|
::= { rcCli 8 }
|
|
|
|
rcCliROUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the read-only CLI account."
|
|
::= { rcCli 9 }
|
|
|
|
rcCliROPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the read-only CLI account."
|
|
::= { rcCli 10 }
|
|
|
|
rcCliMaxTelnetSessions OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the maximum number of telnet
|
|
sessions the system will support."
|
|
DEFVAL { 8 }
|
|
::= { rcCli 11 }
|
|
|
|
rcCliMaxRloginSessions OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the maximum number of rlogin
|
|
sessions the system will support."
|
|
DEFVAL { 8 }
|
|
::= { rcCli 12 }
|
|
|
|
rcCliTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (30..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the amount of idle time, in
|
|
seconds to wait before timing out telnet and
|
|
rlogin sessions."
|
|
DEFVAL { 900 }
|
|
::= { rcCli 13 }
|
|
|
|
rcCliNumAccessViolations OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of CLI access
|
|
violations detected by the system."
|
|
::= { rcCli 14 }
|
|
|
|
rcCliRWL1UserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the read-write layer-1 CLI account."
|
|
::= { rcCli 15 }
|
|
|
|
rcCliRWL1Password OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the read-write layer-1 CLI account."
|
|
::= { rcCli 16 }
|
|
|
|
rcCliPasswordChange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ro(1),
|
|
l1(2),
|
|
l2(3),
|
|
l3(4),
|
|
rw(5),
|
|
rwa(6),
|
|
slboper(7),
|
|
l4oper(8),
|
|
oper(9),
|
|
slbadmin(10),
|
|
l4admin(11),
|
|
ssladmin(12),
|
|
commStrRo(13),
|
|
commStrRw(14),
|
|
commStrl3(15),
|
|
commStrl2(16),
|
|
commStrl1(17),
|
|
webPassWdRo(18),
|
|
webPassWdRwa(19),
|
|
auditor(20),
|
|
security(21),
|
|
operator(22),
|
|
privilege(23),
|
|
administrator(24)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indication which password is changed when
|
|
sending a rcCliPasswordChange trap."
|
|
::= { rcCli 17 }
|
|
|
|
rcCliPassChangeResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
success(1),
|
|
fail(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indication the result of changing password when
|
|
sending a rcPasswordChange trap."
|
|
::= { rcCli 18 }
|
|
|
|
rcCliRWEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable for the read-write CLI account."
|
|
DEFVAL { true }
|
|
::= { rcCli 19 }
|
|
|
|
rcCliRWL1Enable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable for the read-write-layer1 CLI
|
|
account."
|
|
DEFVAL { true }
|
|
::= { rcCli 20 }
|
|
|
|
rcCliRWL2Enable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable for the read-write-layer2 CLI
|
|
account."
|
|
DEFVAL { true }
|
|
::= { rcCli 21 }
|
|
|
|
rcCliRWL3Enable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable for the read-write-layer3 CLI
|
|
account."
|
|
DEFVAL { true }
|
|
::= { rcCli 22 }
|
|
|
|
rcCliROEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable for the read-only CLI account."
|
|
DEFVAL { true }
|
|
::= { rcCli 23 }
|
|
|
|
rcCliRWAEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable for the Admin CLI account."
|
|
DEFVAL { true }
|
|
::= { rcCli 24 }
|
|
|
|
rcCliOperatorUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the Operator CLI account."
|
|
::= { rcCli 25 }
|
|
|
|
rcCliOperatorPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (8..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the Operator CLI account."
|
|
::= { rcCli 26 }
|
|
|
|
rcCliOperatorEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable for the Operator CLI account."
|
|
DEFVAL { false }
|
|
::= { rcCli 27 }
|
|
|
|
rcCliSecurityUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the Security CLI account."
|
|
::= { rcCli 28 }
|
|
|
|
rcCliSecurityPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (8..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the Security CLI account."
|
|
::= { rcCli 29 }
|
|
|
|
rcCliSecurityEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable for the Security CLI account."
|
|
DEFVAL { false }
|
|
::= { rcCli 30 }
|
|
|
|
rcCliAuditorUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for the Auditor CLI account."
|
|
::= { rcCli 31 }
|
|
|
|
rcCliAuditorPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (8..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Password for the Auditor CLI account."
|
|
::= { rcCli 32 }
|
|
|
|
rcCliAuditorEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable for the Auditor CLI account."
|
|
DEFVAL { false }
|
|
::= { rcCli 33 }
|
|
|
|
rcCliPasswordUpperCase OBJECT-TYPE
|
|
SYNTAX Integer32 (1..9)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of mandatory upper case characters
|
|
to be included as part of user password,
|
|
failing which password creation will
|
|
not succeed"
|
|
::= { rcCli 34 }
|
|
|
|
rcCliPasswordLowerCase OBJECT-TYPE
|
|
SYNTAX Integer32 (1..9)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of mandatory lower case characters
|
|
to be included as part of user password,
|
|
failing which password creation will
|
|
not succeed"
|
|
::= { rcCli 35 }
|
|
|
|
rcCliPasswordNumericCase OBJECT-TYPE
|
|
SYNTAX Integer32 (1..9)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of mandatory numeric characters
|
|
to be included as part of user password,
|
|
failing which password creation will
|
|
not succeed"
|
|
::= { rcCli 36 }
|
|
|
|
rcCliPasswordSpecialCase OBJECT-TYPE
|
|
SYNTAX Integer32 (1..9)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of mandatory special characters
|
|
to be included as part of user password,
|
|
failing which password creation will
|
|
not succeed"
|
|
::= { rcCli 37 }
|
|
|
|
rcCliPasswordChangeInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time interval in which user cannot
|
|
change his password from the last password
|
|
change"
|
|
::= { rcCli 38 }
|
|
|
|
rcCliPasswordPreNotificationInterval1 OBJECT-TYPE
|
|
SYNTAX Integer32 (1..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time for first notificateion to be sent to
|
|
the user before the expiry of user password"
|
|
::= { rcCli 39 }
|
|
|
|
rcCliPasswordPreNotificationInterval2 OBJECT-TYPE
|
|
SYNTAX Integer32 (1..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time for second notificateion to be sent to
|
|
the user before the expiry of user password."
|
|
::= { rcCli 40 }
|
|
|
|
rcCliPasswordPreNotificationInterval3 OBJECT-TYPE
|
|
SYNTAX Integer32 (1..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time for third notificateion to be sent to
|
|
the user before the expiry of user password."
|
|
::= { rcCli 41 }
|
|
|
|
rcCliPasswordPostNotificationInterval1 OBJECT-TYPE
|
|
SYNTAX Integer32 (1..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time for first notificateion to be sent to
|
|
the user after the expiry of user password."
|
|
::= { rcCli 42 }
|
|
|
|
rcCliPasswordPostNotificationInterval2 OBJECT-TYPE
|
|
SYNTAX Integer32 (1..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time for second notificateion to be sent to
|
|
the user after the expiry of user password."
|
|
::= { rcCli 43 }
|
|
|
|
rcCliPasswordPostNotificationInterval3 OBJECT-TYPE
|
|
SYNTAX Integer32 (1..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time for third notificateion to be sent to
|
|
the user after the expiry of user password."
|
|
::= { rcCli 44 }
|
|
|
|
rcCliPasswordAccountIdleTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..365)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies time duration, in days, within which if a
|
|
user is not logged in, the account gets disabled."
|
|
DEFVAL { 90 }
|
|
::= { rcCli 45 }
|
|
|
|
rcCliPasswordAccountUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Object to be used for ecnUserAccountIdleTimeExpireTrap |
|
|
rcnAuthenticationFailureLoginAttemptsTrap to indicate
|
|
that idle time has expired for user account or crossed
|
|
max-sessions"
|
|
::= { rcCli 46 }
|
|
|
|
rcCliPasswordUserAccessLevel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..20))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Object to be used for ecnUserAccountIdleTimeExpireTrap |
|
|
rcnAuthenticationFailureLoginAttemptsTrap to indicate
|
|
that idle time has expired for user account or crossed
|
|
max-sessions"
|
|
::= { rcCli 47 }
|
|
|
|
rcCliPasswordPostExpiryLogins OBJECT-TYPE
|
|
SYNTAX Integer32 (1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of allowed logins for a user post the password expiry."
|
|
DEFVAL { 2 }
|
|
::= { rcCli 48 }
|
|
|
|
rcCliLoginAttemptErrorTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether to send trap upon receiving a login
|
|
attempt error in the system."
|
|
DEFVAL { true }
|
|
::= { rcCli 49 }
|
|
|
|
-- rcCoreDumpGlobals
|
|
rcCoreDumpGlobal OBJECT IDENTIFIER ::= { rcCoreDump 1 }
|
|
|
|
rcCoreDumpGlobalCoreDumpEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable the Core dump functionality"
|
|
DEFVAL { enable }
|
|
::= { rcCoreDumpGlobal 1 }
|
|
|
|
rcCoreDumpGlobalCoreDumpDirectory OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Core dump create directory. This specifies
|
|
the directory in which the core dump files is created.
|
|
The core dump is created in PCMCIA, the path should contain
|
|
/pcmcia, if the specified path does not start with /pcmcia
|
|
the specified directory is created in PCMCIA."
|
|
DEFVAL {"/pcmcia/cv/"}
|
|
::= { rcCoreDumpGlobal 2 }
|
|
|
|
-- rcCsuGlobals
|
|
|
|
rcCsuGlobal OBJECT IDENTIFIER ::= { rcCsu 1 }
|
|
|
|
rcCsuGlobalStartUpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
manual(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mode of CSU StartUp(Manual/Auto/None). None may not be used"
|
|
::= { rcCsuGlobal 1 }
|
|
|
|
|
|
-- rcCsuInfo
|
|
rcCsuInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCsuInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of CSU Info Entries."
|
|
::= { rcCsu 2 }
|
|
|
|
rcCsuInfoEntry OBJECT-TYPE
|
|
SYNTAX RcCsuInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CSU Info Table Entry."
|
|
INDEX { rcCsuInfoSlotNumber }
|
|
::= { rcCsuInfoTable 1 }
|
|
|
|
RcCsuInfoEntry ::=
|
|
SEQUENCE {
|
|
rcCsuInfoSlotNumber Integer32,
|
|
rcCsuInfoTypeOfCard INTEGER,
|
|
rcCsuInfoTypeOfCardDesc DisplayString,
|
|
rcCsuInfoUpgradeStatus INTEGER,
|
|
rcCsuInfoUpgradeStartTime DateAndTime,
|
|
rcCsuInfoUpgradeEndTime DateAndTime
|
|
}
|
|
|
|
rcCsuInfoSlotNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Value of the slot number."
|
|
::= { rcCsuInfoEntry 1 }
|
|
|
|
rcCsuInfoTypeOfCard OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
atm(2),
|
|
pos(3),
|
|
wsm(4),
|
|
ssl(5),
|
|
rmod(6),
|
|
esm(7),
|
|
cpu(8),
|
|
others(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Integer holding the card type."
|
|
::= { rcCsuInfoEntry 2 }
|
|
|
|
rcCsuInfoTypeOfCardDesc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of card present in the current slot."
|
|
::= { rcCsuInfoEntry 3 }
|
|
|
|
rcCsuInfoUpgradeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
required(2),
|
|
inProgress(3),
|
|
complete(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Upgrade Status of the card."
|
|
::= { rcCsuInfoEntry 4 }
|
|
|
|
rcCsuInfoUpgradeStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the upgrade start time."
|
|
::= { rcCsuInfoEntry 5 }
|
|
|
|
rcCsuInfoUpgradeEndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the upgrade end time."
|
|
::= { rcCsuInfoEntry 6 }
|
|
|
|
-- CSU Info Table end
|
|
|
|
|
|
-- Error Group
|
|
|
|
rcErrorLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Error level indicator for the last error
|
|
reported in the system. The meaning of
|
|
this value are :
|
|
|
|
0 = Informative Information
|
|
1 = Warning Condition
|
|
2 = Error Condition
|
|
3 = Manufacturing Information
|
|
4 = Fatal Condition
|
|
"
|
|
::= { rcError 1 }
|
|
|
|
rcErrorCode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Error code indicator for the last error
|
|
reported in the system. This is an encoded
|
|
value that identifies the software module
|
|
that generated the error message as well as
|
|
a specific error condition within that module.
|
|
This value is transparent to the user. This
|
|
value is intended to help Accelar support and
|
|
development staff to isolate system problems."
|
|
::= { rcError 2 }
|
|
|
|
rcErrorText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Error string of the last error reported
|
|
in the system."
|
|
::= { rcError 3 }
|
|
|
|
-- rcIpv6 mib
|
|
|
|
--
|
|
-- Textual convention from ietf-draft-2011-update-11
|
|
--
|
|
|
|
IpAddressOriginTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The origin of the address.
|
|
|
|
manual(2) indicates that the address was manually configured
|
|
to a specified address, e.g. by user configuration.
|
|
|
|
dhcp(4) indicates an address that was assigned to this
|
|
system by a DHCP server.
|
|
|
|
linklayer(5) indicates an address created by IPv6 stateless
|
|
auto-configuration.
|
|
|
|
random(6) indicates an address chosen by the system at
|
|
random, e.g. an IPv4 address within 169.254/16, or an RFC
|
|
3041 privacy address."
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
manual(2),
|
|
dhcp(4),
|
|
linklayer(5),
|
|
random(6)
|
|
}
|
|
|
|
|
|
IpAddressStatusTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of an address. Most of the states correspond to
|
|
states from the IPv6 Stateless Address Autoconfiguration
|
|
protocol [5].
|
|
|
|
The preferred(1) state indicates that this is a valid
|
|
address that can appear as the destination or source address
|
|
of a packet.
|
|
|
|
The deprecated(2) state indicates that this is a valid but
|
|
deprecated address that should no longer be used as a source
|
|
address in new communications, but packets addressed to such
|
|
an address are processed as expected.
|
|
|
|
The invalid(3) state indicates that this isn't a valid
|
|
address and it shouldn't appear as the destination or source
|
|
address of a packet.
|
|
|
|
The inaccessible(4) state indicates that the address is not
|
|
accessible because the interface to which this address is
|
|
assigned is not operational.
|
|
|
|
The unknown(5) state indicates that the status can not be
|
|
determined for some reason.
|
|
|
|
|
|
The tentative(6) state indicates the uniqueness of the
|
|
address on the link is being verified. Addresses in this
|
|
state should not be used for general communication and
|
|
should only be used to determine the uniqueness of the
|
|
address.
|
|
|
|
The duplicate(7) state indicates the address has been
|
|
determined to be non-unique on the link and so must not be
|
|
used.
|
|
|
|
In the absence of other information, an IPv4 address is
|
|
always preferred(1)."
|
|
REFERENCE "RFC 2462"
|
|
SYNTAX INTEGER {
|
|
preferred(1),
|
|
deprecated(2),
|
|
invalid(3),
|
|
inaccessible(4),
|
|
unknown(5),
|
|
tentative(6),
|
|
duplicate(7)
|
|
}
|
|
|
|
-- Textual convention from ietf-draft-2011-update-11
|
|
|
|
rcIpv6Mib OBJECT IDENTIFIER ::= { rcIpv6 1 }
|
|
|
|
rcIpv6Notifications OBJECT IDENTIFIER ::= { rcIpv6Mib 0 }
|
|
rcIpv6Objects OBJECT IDENTIFIER ::= { rcIpv6Mib 1 }
|
|
|
|
rcIpv6Scalars OBJECT IDENTIFIER ::= { rcIpv6Objects 1 }
|
|
|
|
-- IPv6 ICMP rate limiting
|
|
rcIpv6IcmpErrorInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The rate (in milliseconds) at which
|
|
ICMP error messages can be sent out.
|
|
A value of zero means not be send any."
|
|
DEFVAL { 1000 }
|
|
::= { rcIpv6Scalars 1 }
|
|
|
|
-- IPv6 Multicast Admin Status
|
|
rcIpv6MulticastAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This indicates the global admin status for
|
|
multicast."
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 2 }
|
|
|
|
-- IPv6 Unreach Admin Status
|
|
rcIpv6IcmpNetUnreach OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set icmp net unreach feature enable/
|
|
disable."
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 3 }
|
|
|
|
-- IPv6 RedirectMsg Admin Status
|
|
rcIpv6IcmpRedirectMsg OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set icmp redirect feature enable/
|
|
disable."
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 4 }
|
|
|
|
-- IPv6 ICMP rate limiting
|
|
rcIpv6IcmpErrorQuota OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of icmp error messages that
|
|
can be sent during the icmp error interval.
|
|
A value of zero means not be send any."
|
|
DEFVAL { 50 }
|
|
::= { rcIpv6Scalars 5 }
|
|
|
|
rcIpv6GlobalAdminEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether IPv6 has been administratively
|
|
enabled."
|
|
DEFVAL { true }
|
|
::= { rcIpv6Scalars 6 }
|
|
|
|
rcIpv6GlobalOperEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether IPv6 is currently enabled."
|
|
DEFVAL { true }
|
|
::= { rcIpv6Scalars 7 }
|
|
|
|
rcIpv6PrefixListTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of Ipv6 Prefix List Table"
|
|
::= { rcIpv6Scalars 8 }
|
|
|
|
rcIpv6ClearDhcpCounters OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object will clear IPv6 DHCP counters."
|
|
::= { rcIpv6Scalars 9 }
|
|
|
|
-- IPv6 Clear Static Routes
|
|
rcIpv6RouteStaticClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear all IPv6 static routes."
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 10 }
|
|
|
|
-- IPv6 Static Routes Global Admin Status
|
|
rcIpv6RouteStaticGlobalAdminEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally enable/disable all IPv6 static routes."
|
|
DEFVAL { true }
|
|
::= { rcIpv6Scalars 11 }
|
|
|
|
rcIpv6IcmpAnycastEchoReply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable icmp echo reply msg
|
|
for anycast addresses."
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 12 }
|
|
|
|
rcIpv6IcmpMulticastEchoReply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable icmp echo reply msg
|
|
for multicast addresses."
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 13 }
|
|
|
|
rcIpv6Autoconfig OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable / disable IPv6 autoconfiguration
|
|
from router advertisements"
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 14 }
|
|
|
|
rcIpv6IcmpAddrUnreach OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable / disable address unreachable message"
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 15 }
|
|
|
|
rcIpv6IcmpPortUnreach OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable / disable port unreachable message"
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 16 }
|
|
|
|
rcIpv6SlowPathToCpu OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable / disable slow-path-to-cpu"
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 17 }
|
|
|
|
rcIpv6ClearGlobalIcmpStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object will clear global IPv6 ICMP statistics"
|
|
::= { rcIpv6Scalars 18 }
|
|
|
|
rcIpv6EcmpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally enable/disable equal-cost
|
|
multi-path feature."
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 19 }
|
|
|
|
rcIpv6EcmpMaxPath OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally set the maximum number of
|
|
paths that can be equal cost."
|
|
::= { rcIpv6Scalars 20 }
|
|
|
|
rcIpv6RoutePrefTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "table size of the rcIpv6RoutePrefTable"
|
|
::= { rcIpv6Scalars 21 }
|
|
|
|
rcIpv6AlternativeRouteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally enable/disable alternative-route."
|
|
DEFVAL { true }
|
|
::= { rcIpv6Scalars 22 }
|
|
|
|
rcIpv6SourceRouteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally enable/disable
|
|
ipv6 source routing feature."
|
|
DEFVAL { false }
|
|
::= { rcIpv6Scalars 23 }
|
|
|
|
rcIpv6IcmpMulticastRequestEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to globally enable/disable
|
|
ipv6 icmp echo multicast request feature."
|
|
DEFVAL { true }
|
|
::= { rcIpv6Scalars 24 }
|
|
|
|
-- IPv6 Interface Table
|
|
rcIpv6InterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains list of IPv6 interfaces and
|
|
per-interface IPv6-specific information."
|
|
::= { rcIpv6Objects 2 }
|
|
|
|
rcIpv6InterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of ipv6 interface In Table containing
|
|
per-interface information."
|
|
INDEX { rcIpv6InterfaceIfIndex }
|
|
::= { rcIpv6InterfaceTable 1 }
|
|
|
|
RcIpv6InterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6InterfaceIfIndex InterfaceIndex,
|
|
rcIpv6InterfaceIdentifier Ipv6AddressIfIdentifier,
|
|
rcIpv6InterfaceIdentifierLength INTEGER,
|
|
rcIpv6InterfaceDescr DisplayString,
|
|
rcIpv6InterfaceVlanId RcVlanIdOrNone,
|
|
rcIpv6InterfaceType INTEGER,
|
|
rcIpv6InterfaceReasmMaxSize INTEGER,
|
|
rcIpv6InterfacePhysAddress PhysAddress,
|
|
rcIpv6InterfaceAdminStatus TruthValue,
|
|
rcIpv6InterfaceOperStatus INTEGER,
|
|
rcIpv6InterfaceReachableTime INTEGER,
|
|
rcIpv6InterfaceRetransmitTime INTEGER,
|
|
rcIpv6InterfaceMulticastAdminStatus TruthValue,
|
|
rcIpv6InterfaceRowStatus RowStatus,
|
|
rcIpv6InterfaceDhcpEnabled TruthValue,
|
|
rcIpv6InterfaceMacOffset INTEGER,
|
|
rcIpv6InterfaceRetransmitTimer Unsigned32,
|
|
rcIpv6InterfaceCurHopLimit Integer32,
|
|
rcIpv6InterfaceClearIcmpStats TruthValue,
|
|
rcIpv6InterfaceClearGeneralStats TruthValue,
|
|
rcIpv6InterfaceClearNeighborCache TruthValue,
|
|
rcIpv6InterfaceClearDestinationCache TruthValue,
|
|
rcIpv6InterfaceReversePathCheckEnable TruthValue,
|
|
rcIpv6InterfaceReversePathCheckMode INTEGER,
|
|
rcIpv6InterfaceForwardingEnabled TruthValue,
|
|
rcIpv6InterfaceRsmltEnable TruthValue,
|
|
rcIpv6InterfaceBfdEnable TruthValue,
|
|
rcIpv6InterfaceIpsecEnable TruthValue,
|
|
rcIpv6InterfaceProcessRedirect TruthValue
|
|
}
|
|
|
|
rcIpv6InterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical interface
|
|
or a logical interface (VLAN).
|
|
For the brouter port it is the ifindex of the
|
|
port and in the case of the vlan it is the
|
|
ifindex of the vlan."
|
|
::= { rcIpv6InterfaceEntry 1 }
|
|
|
|
rcIpv6InterfaceIdentifier OBJECT-TYPE
|
|
SYNTAX Ipv6AddressIfIdentifier
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IPv6 address
|
|
interface identifiers. This is a binary string
|
|
of up to 8 octets in network byte-order."
|
|
::= { rcIpv6InterfaceEntry 2 }
|
|
|
|
rcIpv6InterfaceIdentifierLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
UNITS "bits"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the Interface Identifier in bits."
|
|
::= { rcIpv6InterfaceEntry 3 }
|
|
rcIpv6InterfaceDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "A textual string containing information about the
|
|
interface. This string may be set by network management system."
|
|
::= { rcIpv6InterfaceEntry 4 }
|
|
|
|
rcIpv6InterfaceVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual LAN
|
|
associated with this entry. This value corresponds
|
|
to the lower 12 bits in the IEEE 802.1Q VLAN Tag."
|
|
::= { rcIpv6InterfaceEntry 5 }
|
|
|
|
rcIpv6InterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ethernet(1),
|
|
pointToPoint(2),
|
|
pointToMultipoint(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interface type."
|
|
::= { rcIpv6InterfaceEntry 6 }
|
|
|
|
rcIpv6InterfaceReasmMaxSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1280..1500 | 9600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "MTU for this IPv6 interface, this value should
|
|
be same for all the ip addresses defined on
|
|
this interface.
|
|
In VSP9000, Supported range for IO interface,
|
|
supported range is(1280..1500 | 1850 | 9500).
|
|
For Mgmt interface, Supporyed Range is (1280..1500)"
|
|
DEFVAL { 1500 }
|
|
::= { rcIpv6InterfaceEntry 7 }
|
|
|
|
rcIpv6InterfacePhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The media-dependent `physical' address, for the
|
|
ethernet media it is the MAC address"
|
|
::= { rcIpv6InterfaceEntry 8 }
|
|
|
|
|
|
rcIpv6InterfaceAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The indication of whether IPv6 is enabled (up)
|
|
or disabled (down) on this interface. This object does not
|
|
affect the state of the interface itself, only its
|
|
connection to an IPv6 stack."
|
|
DEFVAL { false }
|
|
::= { rcIpv6InterfaceEntry 9 }
|
|
|
|
rcIpv6InterfaceOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operating status of the interface."
|
|
::= { rcIpv6InterfaceEntry 10 }
|
|
|
|
rcIpv6InterfaceReachableTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3600000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in milliseconds) a neighbor is considered
|
|
reachable after receiving a reachability confirmation.
|
|
REFERENCE RFC2461, Section 6.3.2"
|
|
DEFVAL { 30000 }
|
|
::= { rcIpv6InterfaceEntry 11 }
|
|
|
|
rcIpv6InterfaceRetransmitTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600000)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated. Use rcIpv6InterfaceRetransmitTimer instead."
|
|
DEFVAL { 1000 }
|
|
::= { rcIpv6InterfaceEntry 12 }
|
|
|
|
rcIpv6InterfaceMulticastAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This indicates the admin status for multicast
|
|
for this interface."
|
|
DEFVAL { false }
|
|
::= { rcIpv6InterfaceEntry 13 }
|
|
|
|
rcIpv6InterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete."
|
|
::= { rcIpv6InterfaceEntry 14 }
|
|
|
|
rcIpv6InterfaceDhcpEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable DHCP on the specified
|
|
interface."
|
|
DEFVAL {false}
|
|
::= { rcIpv6InterfaceEntry 15 }
|
|
|
|
rcIpv6InterfaceMacOffset OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to request a particular MAC for an IPv6 VLAN.
|
|
The system has 1536 mac addresses, last 4 are
|
|
reserved for MG.
|
|
One can either mention a mac offset while
|
|
configuring IPv6 on a vlan or it can be alloted
|
|
by the system within the above range."
|
|
::= { rcIpv6InterfaceEntry 16 }
|
|
|
|
rcIpv6InterfaceRetransmitTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The time (in milliseconds) between retransmissions of
|
|
Neighbor Solicitation messages to a neighbor when
|
|
resolving the address or when probing the reachability
|
|
of a neighbor. REFERENCE RFC2461, Section 6.3.2"
|
|
DEFVAL { 1000 }
|
|
::= { rcIpv6InterfaceEntry 17 }
|
|
|
|
rcIpv6InterfaceCurHopLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default value to be placed in the current hop limit
|
|
field in router advertisements sent from this interface.
|
|
The value should be set to the current diameter of the
|
|
Internet.
|
|
|
|
The default should be set to the value specified in the IANA
|
|
web pages (www.iana.org) at the time of implementation.
|
|
REFERENCE RFC2461 Section 6.2.1"
|
|
|
|
DEFVAL { 64 }
|
|
::= { rcIpv6InterfaceEntry 18 }
|
|
|
|
rcIpv6InterfaceClearIcmpStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Clear ICMP statistics for an interface"
|
|
DEFVAL {false}
|
|
::= { rcIpv6InterfaceEntry 20 }
|
|
|
|
rcIpv6InterfaceClearGeneralStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Clear general statistics for an interface"
|
|
DEFVAL {false}
|
|
::= { rcIpv6InterfaceEntry 21 }
|
|
|
|
rcIpv6InterfaceClearNeighborCache OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Clear Neighbor Cache for an interface"
|
|
DEFVAL {false}
|
|
::= { rcIpv6InterfaceEntry 22 }
|
|
|
|
rcIpv6InterfaceClearDestinationCache OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Clear Destination Cache for an interface"
|
|
DEFVAL {false}
|
|
::= { rcIpv6InterfaceEntry 23 }
|
|
|
|
rcIpv6InterfaceReversePathCheckEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
perform Reverse Path Check"
|
|
DEFVAL { false }
|
|
::= { rcIpv6InterfaceEntry 24 }
|
|
|
|
rcIpv6InterfaceReversePathCheckMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
existonly (1),
|
|
strict (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Reverse Path Checking mode."
|
|
DEFVAL { existonly }
|
|
::= { rcIpv6InterfaceEntry 25 }
|
|
|
|
rcIpv6InterfaceForwardingEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface should
|
|
perform forwarding"
|
|
DEFVAL { true }
|
|
::= { rcIpv6InterfaceEntry 26 }
|
|
|
|
rcIpv6InterfaceRsmltEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface has
|
|
rsmlt enabled or not"
|
|
DEFVAL { false }
|
|
::= { rcIpv6InterfaceEntry 27 }
|
|
|
|
rcIpv6InterfaceBfdEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface has
|
|
BFD enabled or not"
|
|
DEFVAL { false }
|
|
::= { rcIpv6InterfaceEntry 28 }
|
|
|
|
rcIpv6InterfaceProcessRedirect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface has
|
|
ProcessRedirect enabled or not"
|
|
DEFVAL { false }
|
|
::= { rcIpv6InterfaceEntry 29 }
|
|
|
|
rcIpv6InterfaceIpsecEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether this interface has
|
|
Ipsec enabled or not"
|
|
DEFVAL { false }
|
|
::= { rcIpv6InterfaceEntry 30 }
|
|
|
|
-- End of IPv6 Interface Table
|
|
-- IPv6 Address Table
|
|
|
|
rcIpv6AddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6AddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains addressing information relevant
|
|
to the entity's interfaces.
|
|
|
|
This table does not contain multicast address
|
|
information. Tables for such information should be
|
|
contained in multicast specific MIBs such as RFC3019.
|
|
|
|
While this table is writable the user will note that several
|
|
objects, such as rcIpv6AddressOrigin, are not. The
|
|
intention in allowing a user to write to this table is to
|
|
allow them to add or remove any entry that isn't permanent.
|
|
The user should be allowed to modify objects and entries
|
|
when that would not cause inconsistencies within the table.
|
|
Allowing write access to objects such as rcIpv6AddressOrigin
|
|
could allow a user to insert an entry and then label it
|
|
incorrectly."
|
|
::= { rcIpv6Objects 3 }
|
|
|
|
|
|
rcIpv6AddressEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6AddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An address mapping for a particular interface. Note that
|
|
when an address is added to an interface the resulted
|
|
prefix is added to that interface."
|
|
INDEX { rcIpv6AddressIfIndex, rcIpv6AddressAddr }
|
|
::= { rcIpv6AddressTable 1 }
|
|
|
|
RcIpv6AddressEntry ::= SEQUENCE {
|
|
rcIpv6AddressIfIndex InterfaceIndex,
|
|
rcIpv6AddressAddr Ipv6Address,
|
|
rcIpv6AddressType INTEGER,
|
|
rcIpv6AddressPrefixLength INTEGER,
|
|
rcIpv6AddressPrefix RowPointer,
|
|
rcIpv6AddressOrigin IpAddressOriginTC,
|
|
rcIpv6AddressStatus IpAddressStatusTC,
|
|
rcIpv6AddressCreated TimeStamp,
|
|
rcIpv6AddressLastChanged TimeStamp,
|
|
rcIpv6AddressRowStatus RowStatus,
|
|
rcIpv6AddressValidLifetime Unsigned32,
|
|
rcIpv6AddressPrefLifetime Unsigned32
|
|
}
|
|
|
|
rcIpv6AddressIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the interface to
|
|
which this entry is applicable. The interface identified by
|
|
a particular value of this index is the same interface as
|
|
identified by the same value of the IfIndex field in the
|
|
rcIpv6InterfaceIfIndex."
|
|
::= { rcIpv6AddressEntry 1 }
|
|
|
|
rcIpv6AddressAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address to which this entry's addressing
|
|
information pertains. This is one of the ipv6 addresses that
|
|
this interface(identified by the rcIpv6AddressIfIndex) has.
|
|
|
|
Implementors need to be aware that if the size of
|
|
ipAddressAddr exceeds 116 octets then OIDS of instances of
|
|
columns in this row will have more than 128 sub-identifiers
|
|
and cannot be accessed using SNMPv1, SNMPv2c or SNMPv3."
|
|
::= { rcIpv6AddressEntry 2 }
|
|
|
|
rcIpv6AddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unicast(1),
|
|
anycast(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of address. It is either unicast or anycast
|
|
IPv6 addresses (RFC3513). "
|
|
DEFVAL { unicast }
|
|
::= { rcIpv6AddressEntry 3 }
|
|
|
|
rcIpv6AddressPrefixLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Prefix Length value for this address. Cannot be changed
|
|
after the creation. This field MUST be provided in order
|
|
to create an entry in this table."
|
|
::= { rcIpv6AddressEntry 4 }
|
|
|
|
rcIpv6AddressPrefix OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A pointer to the row in the prefix table to which this
|
|
address belongs. May be { 0 0 } if there is no such row."
|
|
::= { rcIpv6AddressEntry 5 }
|
|
|
|
rcIpv6AddressOrigin OBJECT-TYPE
|
|
SYNTAX IpAddressOriginTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The origin of the address. The origin of the address, one
|
|
of: other(1),manual(2), dhcp(4),linklayer(5), random(6)"
|
|
::= { rcIpv6AddressEntry 6 }
|
|
|
|
rcIpv6AddressStatus OBJECT-TYPE
|
|
SYNTAX IpAddressStatusTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the address, describing if the address can be
|
|
used for communication. It will One of: preferred(1),
|
|
deprecated(2),invalid(3),inaccessible(4),unknown(5),
|
|
tentative(6), duplicate(7)"
|
|
DEFVAL { preferred }
|
|
::= { rcIpv6AddressEntry 7 }
|
|
|
|
rcIpv6AddressCreated OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of sysUpTime at the time this entry was
|
|
created. If this entry was created prior to the last re-
|
|
initialization of the local network management subsystem,
|
|
then this object contains a zero value."
|
|
::= { rcIpv6AddressEntry 8 }
|
|
|
|
rcIpv6AddressLastChanged OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time this entry was last
|
|
updated. If this entry was updated prior to the last re-
|
|
initialization of the local network management subsystem,
|
|
then this object contains a zero value."
|
|
::= { rcIpv6AddressEntry 9 }
|
|
|
|
rcIpv6AddressRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of this conceptual row.
|
|
The RowStatus TC requires that this DESCRIPTION clause
|
|
states under which circumstances other objects in this row
|
|
can be modified. The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified.
|
|
A conceptual row can not be made active until the
|
|
rcIpv6AddressIfIndex has been set to a valid index. Only
|
|
createAndGo and Delete vlaues are supported. "
|
|
::= { rcIpv6AddressEntry 10 }
|
|
|
|
rcIpv6AddressValidLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Valid lifetime in seconds, indicates
|
|
how long this address is valid.
|
|
A result of 4294967295 means infinite"
|
|
::= { rcIpv6AddressEntry 11 }
|
|
|
|
rcIpv6AddressPrefLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Preferred lifetime in seconds, indicates
|
|
how long this address is in use and not deprecated.
|
|
A result of 4294967295 means infinite"
|
|
::= { rcIpv6AddressEntry 12 }
|
|
|
|
-- Neighbor Discovery Prefix Table
|
|
|
|
rcIpv6PrefixTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6PrefixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table allows the user to
|
|
determine the source of an IP address or set of
|
|
IP addresses and allows other tables to
|
|
share the information via pointer rather than by copying.
|
|
|
|
For example when the node configures both a unicast and
|
|
anycast address for a prefix the ipAddressPrefix objects for
|
|
those addresses will point to a single row in this table.
|
|
|
|
|
|
This table primarily provides support for IPv6 prefixes and
|
|
several of the objects are less meaningful for IPv4. The
|
|
table continues to allow IPv4 addresses to allow future
|
|
flexibility. In order to promote a common configuration
|
|
this document includes suggestions for default values for
|
|
IPv4 prefixes. Each of these values may be overridden if an
|
|
object is meaningful to the node.
|
|
|
|
|
|
All prefixes used by this entity should be included in this
|
|
table independent of how the entity learned the prefix.
|
|
(This table isn't limited to prefixes learned from router
|
|
advertisements.) "
|
|
::= { rcIpv6Objects 4 }
|
|
|
|
rcIpv6PrefixEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6PrefixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of ipv6 prefix In the Table."
|
|
INDEX { rcIpv6PrefixIfIndex,
|
|
rcIpv6PrefixAddr,
|
|
rcIpv6PrefixLength }
|
|
::= { rcIpv6PrefixTable 1 }
|
|
|
|
RcIpv6PrefixEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6PrefixIfIndex InterfaceIndex,
|
|
rcIpv6PrefixAddr Ipv6Address,
|
|
rcIpv6PrefixLength INTEGER,
|
|
rcIpv6PrefixVlanId RcVlanIdOrNone,
|
|
rcIpv6PrefixUseDefaultVal INTEGER,
|
|
rcIpv6PrefixValidLife Integer32,
|
|
rcIpv6PrefixPreferredLife Integer32,
|
|
rcIpv6PrefixAtValidLife DateAndTime,
|
|
rcIpv6PrefixAtPreferredLife DateAndTime,
|
|
rcIpv6PrefixInfinite TruthValue,
|
|
rcIpv6PrefixOnLinkFlag TruthValue,
|
|
rcIpv6PrefixAutoFlag TruthValue,
|
|
rcIpv6PrefixAddressEui INTEGER,
|
|
rcIpv6PrefixNoAdvertise TruthValue,
|
|
rcIpv6PrefixRowStatus RowStatus,
|
|
rcIpv6PrefixValidLifetime Unsigned32,
|
|
rcIpv6PrefixPreferredLifetime Unsigned32
|
|
}
|
|
|
|
rcIpv6PrefixIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify an ipv6 interface.
|
|
For the brouter port it is the ifindex of the
|
|
port and in the case of the vlan it is the
|
|
ifindex of the vlan."
|
|
::= { rcIpv6PrefixEntry 1 }
|
|
|
|
rcIpv6PrefixAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Prefix to create an ipv6 address in ipv6 interface
|
|
table."
|
|
::= { rcIpv6PrefixEntry 2 }
|
|
|
|
rcIpv6PrefixLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mask to create an ipv6 prefix entry
|
|
either will be advertised or suppressed"
|
|
::= { rcIpv6PrefixEntry 3 }
|
|
|
|
rcIpv6PrefixVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual LAN
|
|
associated with this entry. This value corresponds
|
|
to the lower 12 bits in the IEEE 802.1Q VLAN Tag."
|
|
::= { rcIpv6PrefixEntry 4 }
|
|
|
|
|
|
rcIpv6PrefixUseDefaultVal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
valid-life(2),
|
|
preferred-life(3),
|
|
infinite(4),
|
|
no-advertise(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select one of the value to set/use it's value
|
|
to default value. This is a bitmask field,
|
|
setting all the bits means that all the options
|
|
will be reverted to default values."
|
|
::= { rcIpv6PrefixEntry 5 }
|
|
|
|
rcIpv6PrefixValidLife OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Valid lifetime in seconds, indicates
|
|
how long this prefix advertised in
|
|
the nbr advertisement is valid."
|
|
DEFVAL { 2592000 }
|
|
::= { rcIpv6PrefixEntry 6 }
|
|
|
|
rcIpv6PrefixPreferredLife OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600000)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Preferred lifetime in seconds, indicates
|
|
how long this prefix advertised in
|
|
advertisemt for this prefix."
|
|
DEFVAL { 604800 }
|
|
::= { rcIpv6PrefixEntry 7 }
|
|
|
|
rcIpv6PrefixAtValidLife OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Is the date and time, upon reaching this
|
|
value the prefix will be expired,
|
|
if configured this option will
|
|
be included in the neighbor advertisement
|
|
for this prefix."
|
|
::= { rcIpv6PrefixEntry 8 }
|
|
|
|
rcIpv6PrefixAtPreferredLife OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Is the date and time, upon reaching this
|
|
value the prefix will be expired,
|
|
if configured this option will be
|
|
included in the neighbor advertisement
|
|
for this prefix."
|
|
::= { rcIpv6PrefixEntry 9 }
|
|
|
|
rcIpv6PrefixInfinite OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "if set the prefix's valid lifetime will
|
|
not exprie."
|
|
DEFVAL { false }
|
|
::= { rcIpv6PrefixEntry 10 }
|
|
|
|
rcIpv6PrefixOnLinkFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "if set then this prefix can be used
|
|
for onlink determination. This value
|
|
be placed in the L-bit field in the prefix
|
|
information option. It is a 1 bit flag. "
|
|
DEFVAL { true }
|
|
::= { rcIpv6PrefixEntry 11 }
|
|
|
|
rcIpv6PrefixAutoFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "if set then this prefix can be used
|
|
for autonomous address config. This value
|
|
be placed in the auto-flag field in the prefix
|
|
information option. It is a 1 bit flag. "
|
|
DEFVAL { true }
|
|
::= { rcIpv6PrefixEntry 12 }
|
|
|
|
rcIpv6PrefixAddressEui OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eui-not-used(1),
|
|
eui-used-with-ul-complement(2),
|
|
eui-used-without-ul-complement(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Use an EUI-64 interface ID in the low-order
|
|
64bits of the address when not specified in the address field.
|
|
If enabled use EUI, otherwise use EUI-64 and complement U/L
|
|
(Universal/Local bit). This operation should
|
|
be allowed for both global and link local
|
|
addresses. Once the entry is create cannot modify this field.
|
|
This will be valid to use only when the PrefixLength is 64 or less"
|
|
DEFVAL { eui-not-used }
|
|
::= { rcIpv6PrefixEntry 13 }
|
|
|
|
rcIpv6PrefixNoAdvertise OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "if set then this prefix can not be included
|
|
in the neighbor advertisement."
|
|
DEFVAL { false }
|
|
::= { rcIpv6PrefixEntry 14 }
|
|
|
|
rcIpv6PrefixRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete."
|
|
::= { rcIpv6PrefixEntry 15 }
|
|
|
|
rcIpv6PrefixValidLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Valid lifetime in seconds, indicates
|
|
how long this prefix advertised in
|
|
the nbr advertisement is valid.
|
|
Value of 4294967295 represents infinity."
|
|
DEFVAL { 2592000 }
|
|
::= { rcIpv6PrefixEntry 16 }
|
|
|
|
rcIpv6PrefixPreferredLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Preferred lifetime in seconds, indicates
|
|
how long this prefix advertised in
|
|
advertisemt for this prefix.
|
|
Value of 4294967295 represents infinity."
|
|
DEFVAL { 604800 }
|
|
::= { rcIpv6PrefixEntry 17 }
|
|
|
|
-- IPV6 Neighbor Discovery Route Advertisement Table
|
|
|
|
rcIpv6RouterAdvertTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RouterAdvertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table containing information
|
|
used to construct router advertisements."
|
|
::= { rcIpv6Objects 5 }
|
|
|
|
rcIpv6RouterAdvertEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RouterAdvertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing information used to construct
|
|
router advertisements."
|
|
INDEX { rcIpv6RouterAdvertIfIndex }
|
|
::= { rcIpv6RouterAdvertTable 1 }
|
|
|
|
RcIpv6RouterAdvertEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RouterAdvertIfIndex InterfaceIndex,
|
|
rcIpv6RouterAdvertSendAdverts TruthValue,
|
|
rcIpv6RouterAdvertUseDefaultVal INTEGER,
|
|
rcIpv6RouterAdvertMaxInterval INTEGER,
|
|
rcIpv6RouterAdvertMinInterval INTEGER,
|
|
rcIpv6RouterAdvertReachableTime INTEGER,
|
|
rcIpv6RouterAdvertRetransmitTimer INTEGER,
|
|
rcIpv6RouterAdvertDefaultLifeTime INTEGER,
|
|
rcIpv6RouterAdvertCurHopLimit INTEGER,
|
|
rcIpv6RouterAdvertManagedFlag TruthValue,
|
|
rcIpv6RouterAdvertOtherConfigFlag TruthValue,
|
|
rcIpv6RouterAdvertDadNsNum INTEGER,
|
|
rcIpv6RouterAdvertLinkMTU Unsigned32,
|
|
rcIpv6RouterAdvertRetransmitTime Unsigned32
|
|
}
|
|
|
|
rcIpv6RouterAdvertIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify an ipv6 interface.
|
|
For the brouter port it is the ifindex of the
|
|
port and in the case of the vlan it is the
|
|
ifindex of the vlan."
|
|
::= { rcIpv6RouterAdvertEntry 1 }
|
|
|
|
rcIpv6RouterAdvertSendAdverts OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag indicating whether or not the router sends periodic
|
|
router advertisements and responds to router solicitations
|
|
on this interface. REFERENCE RFC2461 Section 6.2.1"
|
|
DEFVAL { false }
|
|
::= { rcIpv6RouterAdvertEntry 2 }
|
|
|
|
rcIpv6RouterAdvertUseDefaultVal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
send-advertisement(2),
|
|
max-interval(3),
|
|
min-interval(4),
|
|
default-life-time(5),
|
|
hop-limit(6),
|
|
managed-flag(7),
|
|
other-config-flag(8),
|
|
dad-ns-num(9),
|
|
linkMtu(10),
|
|
reachableTime(11),
|
|
retransmitTime(12)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select one of the value to set/use it's
|
|
value to default value, or set all the bits
|
|
to indicate all the options will be set to
|
|
their default value."
|
|
::= { rcIpv6RouterAdvertEntry 3 }
|
|
|
|
rcIpv6RouterAdvertMaxInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (4..1800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configure the max interval (in seconds)
|
|
at which the transmission of route
|
|
advertisments can occur on this interface.
|
|
This must be no less than 4 seconds and
|
|
no greater than 1800."
|
|
DEFVAL { 600 }
|
|
::= { rcIpv6RouterAdvertEntry 4 }
|
|
|
|
rcIpv6RouterAdvertMinInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (3..1350)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configure the min interval (in seconds)
|
|
at which the transmission of route
|
|
advertisments can occur on this interface.
|
|
This must be no less than 3 seconds and
|
|
no greater than .75* max-interval."
|
|
DEFVAL { 200 }
|
|
::= { rcIpv6RouterAdvertEntry 5 }
|
|
|
|
rcIpv6RouterAdvertReachableTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value (in milliseconds) to be placed in the router advertisement message
|
|
sent by the router. The value zero means
|
|
unspecified (by this router). Used to
|
|
configure the amount of time that a remote
|
|
IPv6 node is considered reachable after
|
|
some reachability confirmation event has
|
|
occured.
|
|
REFERENCE RFC2461 Section 6.2.1"
|
|
::= { rcIpv6RouterAdvertEntry 6 }
|
|
|
|
rcIpv6RouterAdvertRetransmitTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..36000000)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The value (in milliseconds) to be placed in the retransmit timer field in router
|
|
advertisement message sent from this
|
|
interface. The value zero means
|
|
unspecified (by this router). Used to
|
|
configure the amount of time that router
|
|
should wait for the transmit to occur.
|
|
REFERENCE RFC2461 Section 6.2.1.
|
|
Deprecated by rcIpv6RouterAdvertRetransmitTime"
|
|
::= { rcIpv6RouterAdvertEntry 7 }
|
|
|
|
rcIpv6RouterAdvertDefaultLifeTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0|4..9000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be placed in the router lifetime field of
|
|
router advertisements sent from this interface. This value
|
|
MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and
|
|
9000 seconds.
|
|
|
|
|
|
A value of zero indicates that the router is not to be used
|
|
as a default router.
|
|
|
|
The default is 3 * rcIpv6RouterAdvertMaxInterval.
|
|
REFERENCE RFC2461 Section 6.2.1"
|
|
DEFVAL { 1800 }
|
|
::= { rcIpv6RouterAdvertEntry 8 }
|
|
|
|
rcIpv6RouterAdvertCurHopLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default value to be placed in the current hop limit
|
|
field in router advertisements sent from this interface.
|
|
The value should be set to the current diameter of the
|
|
Internet.
|
|
|
|
A value of zero in the router advertisement indicates that
|
|
the advertisement isn't specifying a value for curHopLimit.
|
|
|
|
The default should be set to the value specified in the IANA
|
|
web pages (www.iana.org) at the time of implementation.
|
|
REFERENCE RFC2461 Section 6.2.1"
|
|
|
|
DEFVAL { 64 }
|
|
::= { rcIpv6RouterAdvertEntry 9 }
|
|
|
|
rcIpv6RouterAdvertManagedFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "if true then the M-bit(Managed address
|
|
configureation) in the router
|
|
adverisement will be set.
|
|
REFERENCE RFC2461 Section 6.2.1"
|
|
DEFVAL { false }
|
|
::= { rcIpv6RouterAdvertEntry 10 }
|
|
|
|
rcIpv6RouterAdvertOtherConfigFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "if true then the O-bit (Other stateful
|
|
Configuration) in the router
|
|
adverisement will be set. REFERENCE
|
|
RFC2461 Section 6.2.1"
|
|
DEFVAL { false }
|
|
::= { rcIpv6RouterAdvertEntry 11 }
|
|
|
|
rcIpv6RouterAdvertDadNsNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of neighbor solicitation
|
|
messages for DAD (Duplicate address
|
|
detection). A value 0 is used to disable
|
|
DAD process on this interface. A value 1
|
|
is used to send one advertisment without
|
|
any retransmissions."
|
|
::= { rcIpv6RouterAdvertEntry 12 }
|
|
|
|
rcIpv6RouterAdvertLinkMTU OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 1280..1500 | 1850 | 9500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be placed in MTU options sent by the
|
|
router on this interface. A value of zero
|
|
indicates that no MTU options are sent. REFERENCE
|
|
RFC2461 Section 6.2.1"
|
|
::= { rcIpv6RouterAdvertEntry 13 }
|
|
|
|
rcIpv6RouterAdvertRetransmitTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value (in milliseconds) to be placed in the retransmit timer field in router
|
|
advertisement message sent from this
|
|
interface. The value zero means
|
|
unspecified (by this router). Used to
|
|
configure the amount of time that router
|
|
should wait for the transmit to occur.
|
|
REFERENCE RFC2461 Section 6.2.1.
|
|
Use this object to replace
|
|
rcIpv6RouterAdvertRetransmitTimer"
|
|
::= { rcIpv6RouterAdvertEntry 14 }
|
|
|
|
-- IPV6 Static Route Table
|
|
|
|
rcIpv6StaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6StaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains list of routes that are
|
|
created by the user to destination networks."
|
|
::= { rcIpv6Objects 6 }
|
|
|
|
rcIpv6StaticRouteEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6StaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the static route table for IPv6
|
|
can be created for a destination with a specific
|
|
prefix length; multiple entries to the same
|
|
destination are created either by specifying the
|
|
next-hop or interfaceIndex or both to reach the destination.
|
|
However if the nexthop Ipv6 address is a link-local
|
|
address then IfIndex must be supplied."
|
|
INDEX { rcIpv6StaticRouteDest,
|
|
rcIpv6StaticRoutePrefixLength,
|
|
rcIpv6StaticRouteNextHop,
|
|
rcIpv6StaticRouteIfIndex }
|
|
::= { rcIpv6StaticRouteTable 1 }
|
|
|
|
RcIpv6StaticRouteEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6StaticRouteDest Ipv6Address,
|
|
rcIpv6StaticRoutePrefixLength INTEGER,
|
|
rcIpv6StaticRouteNextHop Ipv6Address,
|
|
rcIpv6StaticRouteIfIndex InterfaceIndex,
|
|
rcIpv6StaticRouteDistance INTEGER,
|
|
rcIpv6StaticRouteEnable TruthValue,
|
|
rcIpv6StaticRouteStatus INTEGER,
|
|
rcIpv6StaticRoutePreference INTEGER,
|
|
rcIpv6StaticRouteRowStatus RowStatus
|
|
}
|
|
|
|
rcIpv6StaticRouteDest OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The destination IPv6 address of this route.
|
|
The values for the index objects rcIpv6StaticRouteDest and
|
|
rcIpv6StaticRoutePrefixLength must be consistent. When
|
|
the value of rcIpv6StaticRouteDest (excluding the zone
|
|
index, if one is present) is x, then the bitwise
|
|
logical-AND of x with the value of the mask formed from
|
|
the corresponding index object
|
|
rcIpv6StaticRoutePrefixLength MUST be equal to x. If
|
|
not, then the index pair is not consistent and an
|
|
inconsistentName error must be returned on SET or
|
|
CREATE requests."
|
|
|
|
::= { rcIpv6StaticRouteEntry 1 }
|
|
|
|
rcIpv6StaticRoutePrefixLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Indicates the number of leading one bits which
|
|
form the mask to be logical-ANDed with the destination
|
|
address before being compared to the value in the
|
|
rcIpv6StaticRouteDestAddr field."
|
|
::= { rcIpv6StaticRouteEntry 2 }
|
|
|
|
rcIpv6StaticRouteNextHop OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Next hop IPv6 address for this destination.
|
|
On remote routes, the address of the next system en
|
|
route. For non-remote routes, a zero length string. "
|
|
::= { rcIpv6StaticRouteEntry 3 }
|
|
|
|
rcIpv6StaticRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The ifIndex value which identifies the local
|
|
interface through which the next hop of this route
|
|
should be reached. A value of 0 is valid and
|
|
represents the scenario where no interface is specified."
|
|
::= { rcIpv6StaticRouteEntry 4 }
|
|
|
|
rcIpv6StaticRouteDistance OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "cost/distance to reach the destination for this
|
|
node."
|
|
DEFVAL { 1 }
|
|
::= { rcIpv6StaticRouteEntry 5 }
|
|
|
|
rcIpv6StaticRouteStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notReachable(1),
|
|
tryToResolve(2),
|
|
reachableNotInRtm(3),
|
|
reachableInRtm(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "(1)notReachable means the route is not reachable and no
|
|
neighbor request entry is built to resolved the next-hop.
|
|
It happens when there is no route or neighbor to reach
|
|
the static route's next-hop.
|
|
(2)tryToResolve means the route is not reachable but a
|
|
neighbor request entry is built to resolved the next-hop.
|
|
It happens when there is a local equivelent route in system to
|
|
reach the next-hop but the neighor is not learnt yet
|
|
(3)reachableNotInRtm means the static route is
|
|
reachable but it is not in RTM. It happens when the static
|
|
route is reachable, but it is not the best among alternative
|
|
static route.
|
|
(4)reachableInRtm means the static route is reachable
|
|
and it is in RTM. It happens when the static
|
|
route is reachable, and it is the best among alternative
|
|
static route to be added into RTM. "
|
|
::= { rcIpv6StaticRouteEntry 6 }
|
|
|
|
rcIpv6StaticRoutePreference OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the route preference of this
|
|
entry. If there are more than one route that can
|
|
be used to forward IP traffic, the route that has
|
|
a highest preference will be used instead of a
|
|
lower preference one. The higher the number,
|
|
the higher the preference."
|
|
DEFVAL { 5 }
|
|
::= { rcIpv6StaticRouteEntry 7 }
|
|
|
|
rcIpv6StaticRouteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable this entry."
|
|
DEFVAL { true }
|
|
::= { rcIpv6StaticRouteEntry 8 }
|
|
|
|
|
|
rcIpv6StaticRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete."
|
|
::= { rcIpv6StaticRouteEntry 9 }
|
|
|
|
-- IPV6 Management Port Static Route Table
|
|
|
|
rcIpv6MgmtPortStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6MgmtPortStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains list of routes that are
|
|
created by the user to destination networks
|
|
on the management port."
|
|
::= { rcIpv6Objects 12 }
|
|
|
|
rcIpv6MgmtPortStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6MgmtPortStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the static route table for IPv6
|
|
can be created for a destination with a specific
|
|
prefix length; multiple entries to the same
|
|
destination are created either by specifying the
|
|
next-hop or interfaceIndex or both to reach the destination.
|
|
However if the nexthop Ipv6 address is a link-local
|
|
address then IfIndex must be supplied."
|
|
INDEX { rcIpv6MgmtPortStaticRouteIfIndex,
|
|
rcIpv6MgmtPortStaticRouteDest,
|
|
rcIpv6MgmtPortStaticRoutePrefixLength,
|
|
rcIpv6MgmtPortStaticRouteNextHop }
|
|
::= { rcIpv6MgmtPortStaticRouteTable 1 }
|
|
|
|
RcIpv6MgmtPortStaticRouteEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6MgmtPortStaticRouteIfIndex InterfaceIndex,
|
|
rcIpv6MgmtPortStaticRouteDest Ipv6Address,
|
|
rcIpv6MgmtPortStaticRoutePrefixLength INTEGER,
|
|
rcIpv6MgmtPortStaticRouteNextHop Ipv6Address,
|
|
rcIpv6MgmtPortStaticRouteDistance INTEGER,
|
|
rcIpv6MgmtPortStaticRouteEnable TruthValue,
|
|
rcIpv6MgmtPortStaticRouteStatus INTEGER,
|
|
rcIpv6MgmtPortStaticRoutePreference INTEGER,
|
|
rcIpv6MgmtPortStaticRouteRowStatus RowStatus
|
|
}
|
|
|
|
rcIpv6MgmtPortStaticRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The ifIndex value which identifies the local
|
|
interface through which the next hop of this route
|
|
should be reached. A value of 0 is valid and
|
|
represents the scenario where no interface is specified."
|
|
::= { rcIpv6MgmtPortStaticRouteEntry 1 }
|
|
|
|
rcIpv6MgmtPortStaticRouteDest OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The destination IPv6 address of this route.
|
|
The values for the index objects rcIpv6StaticRouteDest and
|
|
rcIpv6StaticRoutePrefixLength must be consistent. When
|
|
the value of rcIpv6StaticRouteDest (excluding the zone
|
|
index, if one is present) is x, then the bitwise
|
|
logical-AND of x with the value of the mask formed from
|
|
the corresponding index object
|
|
rcIpv6StaticRoutePrefixLength MUST be equal to x. If
|
|
not, then the index pair is not consistent and an
|
|
inconsistentName error must be returned on SET or
|
|
CREATE requests."
|
|
|
|
::= { rcIpv6MgmtPortStaticRouteEntry 2 }
|
|
|
|
rcIpv6MgmtPortStaticRoutePrefixLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Indicates the number of leading one bits which
|
|
form the mask to be logical-ANDed with the destination
|
|
address before being compared to the value in the
|
|
rcIpv6MgmtPortStaticRouteDestAddr field."
|
|
::= { rcIpv6MgmtPortStaticRouteEntry 3 }
|
|
|
|
rcIpv6MgmtPortStaticRouteNextHop OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Next hop IPv6 address for this destination.
|
|
On remote routes, the address of the next system en
|
|
route. For non-remote routes, a zero length string. "
|
|
::= { rcIpv6MgmtPortStaticRouteEntry 4 }
|
|
|
|
rcIpv6MgmtPortStaticRouteDistance OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535 )
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "cost/distance to reach the destination for this
|
|
node."
|
|
DEFVAL { 1 }
|
|
::= { rcIpv6MgmtPortStaticRouteEntry 5 }
|
|
|
|
rcIpv6MgmtPortStaticRouteStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notReachable(1),
|
|
tryToResolve(2),
|
|
reachableNotInRtm(3),
|
|
reachableInRtm(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "(1)notReachable means the route is not reachable and no
|
|
neighbor request entry is built to resolved the next-hop.
|
|
It happens when there is no route or neighbor to reach
|
|
the static route's next-hop.
|
|
(2)tryToResolve means the route is not reachable but a
|
|
neighbor request entry is built to resolved the next-hop.
|
|
It happens when there is a local equivelent route in system to
|
|
reach the next-hop but the neighor is not learnt yet
|
|
(3)reachableNotInRtm means the static route is
|
|
reachable but it is not in RTM. It happens when the static
|
|
route is reachable, but it is not the best among alternative
|
|
static route.
|
|
(4)reachableInRtm means the static route is reachable
|
|
and it is in RTM. It happens when the static
|
|
route is reachable, and it is the best among alternative
|
|
static route to be added into RTM. "
|
|
::= { rcIpv6MgmtPortStaticRouteEntry 6 }
|
|
|
|
rcIpv6MgmtPortStaticRoutePreference OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the route preference of this
|
|
entry. If there are more than one route that can
|
|
be used to forward IP traffic, the route that has
|
|
a highest preference will be used instead of a
|
|
lower preference one. The higher the number,
|
|
the higher the preference."
|
|
DEFVAL { 5 }
|
|
::= { rcIpv6MgmtPortStaticRouteEntry 7 }
|
|
|
|
rcIpv6MgmtPortStaticRouteEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable this entry."
|
|
DEFVAL { true }
|
|
::= { rcIpv6MgmtPortStaticRouteEntry 8 }
|
|
|
|
|
|
rcIpv6MgmtPortStaticRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete."
|
|
::= { rcIpv6MgmtPortStaticRouteEntry 9 }
|
|
|
|
-- the Internet Address Translation table
|
|
--
|
|
|
|
rcIpv6NetToPhysicalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6NetToPhysicalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address Translation table used for mapping from IP
|
|
addresses to physical addresses.
|
|
|
|
The Address Translation tables contain the IP address to
|
|
'physical' address equivalences. Some interfaces do not use
|
|
translation tables for determining address equivalences
|
|
(e.g., DDN-X.25 has an algorithmic method); if all
|
|
interfaces are of this type, then the Address Translation
|
|
table is empty, i.e., has zero entries.
|
|
|
|
While many protocols may be used to populate this table, ARP
|
|
[10] and Neighbor Discovery [4] are the most likely
|
|
options."
|
|
REFERENCE "RFC0826 and RFC2461"
|
|
::= { rcIpv6Objects 7 }
|
|
|
|
rcIpv6NetToPhysicalEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6NetToPhysicalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one IP address to `physical' address
|
|
equivalence."
|
|
INDEX { rcIpv6NetToPhysicalIfIndex,
|
|
rcIpv6NetToPhysicalNetAddress }
|
|
::= { rcIpv6NetToPhysicalTable 1 }
|
|
|
|
RcIpv6NetToPhysicalEntry ::= SEQUENCE {
|
|
rcIpv6NetToPhysicalIfIndex InterfaceIndex,
|
|
rcIpv6NetToPhysicalNetAddress Ipv6Address,
|
|
rcIpv6NetToPhysicalPhysAddress PhysAddress,
|
|
rcIpv6NetToPhysicalInterface Integer32,
|
|
rcIpv6NetToPhysicalLastUpdated TimeStamp,
|
|
rcIpv6NetToPhysicalType INTEGER,
|
|
rcIpv6NetToPhysicalState INTEGER,
|
|
rcIpv6NetToPhysicalRowStatus RowStatus,
|
|
rcIpv6NetToPhysicalBMac MacAddress,
|
|
rcIpv6NetToPhysicalCvid Integer32
|
|
}
|
|
|
|
rcIpv6NetToPhysicalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the interface to
|
|
which this entry is applicable. The interface identified by
|
|
a particular value of this index is the same interface as
|
|
identified by the same value of the IfIndex field in the
|
|
rcIpv6InterfaceIfIndex."
|
|
::= { rcIpv6NetToPhysicalEntry 1 }
|
|
|
|
rcIpv6NetToPhysicalNetAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address corresponding to the media-dependent
|
|
`physical' address. The address type of this object is
|
|
specified in rcIpv6NetToPhysicalAddressType.
|
|
|
|
|
|
Implementors need to be aware that if the size of
|
|
rcIpv6NetToPhysicalNetAddress exceeds 115 octets then OIDS of
|
|
instances of columns in this row will have more than 128
|
|
sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c
|
|
or SNMPv3."
|
|
::= { rcIpv6NetToPhysicalEntry 2 }
|
|
|
|
rcIpv6NetToPhysicalPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress (SIZE(0..65535))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The media-dependent `physical' address.
|
|
|
|
As the entries in this table are typically not persistent
|
|
when this object is written the entity SHOULD NOT save the
|
|
change to non-volatile storage. In the ethernet case
|
|
it is a MAC address."
|
|
::= { rcIpv6NetToPhysicalEntry 3 }
|
|
|
|
rcIpv6NetToPhysicalInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field represents either a physical port id or the MLT
|
|
port id. This entry is associated either with
|
|
a port or with a MLT in a VLAN/Brouter port. If the value is
|
|
0 then the interface is CP port."
|
|
::= { rcIpv6NetToPhysicalEntry 4 }
|
|
|
|
rcIpv6NetToPhysicalLastUpdated OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time this entry was last
|
|
updated. If this entry was updated prior to the last re-
|
|
initialization of the local network management subsystem,
|
|
then this object contains a zero value."
|
|
::= { rcIpv6NetToPhysicalEntry 5 }
|
|
|
|
rcIpv6NetToPhysicalType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
dynamic(2),
|
|
static(3),
|
|
local(4) -- local interface
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of mapping.
|
|
|
|
The 'dynamic(2)' type indicates that the IP address to
|
|
physical addresses mapping has been dynamically resolved
|
|
using e.g. IPv4 ARP or the IPv6 Neighbor Discovery protocol.
|
|
|
|
The 'static(3)' type indicates that the mapping has been
|
|
statically configured. Both of these refer to entries that
|
|
provide mappings for other entities addresses.
|
|
|
|
The 'local(4)' type indicates that the mapping is provided
|
|
for an entity's own interface address.
|
|
|
|
As the entries in this table are typically not persistent
|
|
when this object is written the entity SHOULD NOT save the
|
|
change to non-volatile storage."
|
|
DEFVAL { static }
|
|
::= { rcIpv6NetToPhysicalEntry 6 }
|
|
|
|
rcIpv6NetToPhysicalState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reachable(1), -- confirmed reachability
|
|
|
|
stale(2), -- unconfirmed reachability
|
|
|
|
delay(3), -- waiting for reachability
|
|
-- confirmation before entering
|
|
-- the probe state
|
|
|
|
probe(4), -- actively probing
|
|
|
|
invalid(5), -- an invalidated mapping
|
|
|
|
unknown(6), -- state can not be determined
|
|
-- for some reason.
|
|
|
|
incomplete(7) -- address resolution is being performed.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Neighbor Unreachability Detection [4] state for the
|
|
interface when the address mapping in this entry is used.
|
|
If Neighbor Unreachability Detection is not in use (eg. for
|
|
IPv4), this object is always unknown(6).
|
|
REFERENCE RFC2461"
|
|
::= { rcIpv6NetToPhysicalEntry 8 }
|
|
|
|
rcIpv6NetToPhysicalRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
The RowStatus TC requires that this DESCRIPTION clause
|
|
states under which circumstances other objects in this row
|
|
can be modified. The value of this object has no effect on
|
|
whether other objects in this conceptual row can be
|
|
modified.
|
|
|
|
A conceptual row can not be made active until the
|
|
rcIpv6NetToPhysicalPhysAddress object has been set.
|
|
Note that if the rcIpv6NetToPhysicalType is set to
|
|
'invalid' the
|
|
managed node may delete the entry independent of the state
|
|
of this object. Only createandGo and Delete operations are
|
|
supported"
|
|
::= { rcIpv6NetToPhysicalEntry 9 }
|
|
|
|
rcIpv6NetToPhysicalBMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the rcIpv6NetToPhysicalEntry is learned from a
|
|
SPBM network, instead of using port to track where the
|
|
rcIpv6NetToPhysicalNetAddress come from, the backbone
|
|
MAC address is used to track that."
|
|
::= { rcIpv6NetToPhysicalEntry 10 }
|
|
|
|
rcIpv6NetToPhysicalCvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to identify customer vid of the switched uni port
|
|
of this entry is associated with. 4095 is not used. 4096
|
|
is reserved for untagged case."
|
|
::= { rcIpv6NetToPhysicalEntry 11 }
|
|
|
|
rcIpv6PrefixListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6PrefixListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 Prefix List table"
|
|
::= { rcIpv6Objects 8 }
|
|
|
|
rcIpv6PrefixListEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6PrefixListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ipv6 Prefix List Table."
|
|
INDEX { rcIpv6PrefixListId,
|
|
rcIpv6PrefixListPrefix,
|
|
rcIpv6PrefixListPrefixMaskLen }
|
|
::= { rcIpv6PrefixListTable 1 }
|
|
|
|
RcIpv6PrefixListEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6PrefixListId Unsigned32,
|
|
rcIpv6PrefixListPrefix Ipv6Address,
|
|
rcIpv6PrefixListPrefixMaskLen Unsigned32,
|
|
rcIpv6PrefixListMaskLenFrom Unsigned32,
|
|
rcIpv6PrefixListMaskLenUpto Unsigned32,
|
|
rcIpv6PrefixListName SnmpAdminString,
|
|
rcIpv6PrefixListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpv6PrefixListId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Id of an IPv6 Prefix List"
|
|
::= { rcIpv6PrefixListEntry 1 }
|
|
|
|
rcIpv6PrefixListPrefix OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Is a member of a specific ipv6 prefix list.
|
|
Adding the prefix to the given ipv6 prefix list"
|
|
::= { rcIpv6PrefixListEntry 2 }
|
|
|
|
rcIpv6PrefixListPrefixMaskLen OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mask length of the ipv6 prefix added to the prefix list"
|
|
::= { rcIpv6PrefixListEntry 3 }
|
|
|
|
rcIpv6PrefixListMaskLenFrom OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Lower bound of mask length of the ipv6 prefix added to
|
|
the prefix list"
|
|
::= { rcIpv6PrefixListEntry 4 }
|
|
|
|
rcIpv6PrefixListMaskLenUpto OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Higher bound of mask length of the ipv6 prefix added to
|
|
the prefix list"
|
|
::= { rcIpv6PrefixListEntry 5 }
|
|
|
|
rcIpv6PrefixListName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Name of the Ipv6 prefix list"
|
|
::= { rcIpv6PrefixListEntry 6 }
|
|
|
|
rcIpv6PrefixListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the ipv6 prefix list
|
|
table"
|
|
::= { rcIpv6PrefixListEntry 7 }
|
|
|
|
--
|
|
-- IPv6 OSPF MIB draft-ietf-ospf-ospfv3-mib-08.txt
|
|
--
|
|
|
|
-- IPv6 OSPF Texual conventions
|
|
|
|
UpToRefreshInterval ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The values one might be able to configure for
|
|
variables bounded by the Refresh Interval"
|
|
SYNTAX Integer32 (1..1800)
|
|
|
|
RouterDeadRange ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The range of intervals in seconds that a routers hello
|
|
must have not been seen before a neighbor declares the
|
|
router down"
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
|
|
|
|
-- Ospfv3
|
|
rcOspfv3Mib OBJECT IDENTIFIER ::= { rcOspfv3 1 }
|
|
|
|
rcOspfv3Objects OBJECT IDENTIFIER ::= { rcOspfv3Mib 1 }
|
|
rcOspfv3Conformance OBJECT IDENTIFIER ::= { rcOspfv3Mib 2 }
|
|
|
|
-- OSPFv3 General Variables
|
|
rcOspfv3GeneralGroup OBJECT IDENTIFIER ::= { rcOspfv3Objects 1 }
|
|
|
|
-- These parameters apply globally to the Router's OSPFv3 Process
|
|
rcOspfv3RouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
router in the Autonomous System.
|
|
To ensure uniqueness, this may
|
|
default to the value of one of the
|
|
router's IPv4 interface addresses if IPv4 is
|
|
configured on the router."
|
|
::= { rcOspfv3GeneralGroup 1 }
|
|
|
|
rcOspfv3AdminStat OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled (1), disabled (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of OSPFv3 in the
|
|
router. The value 'enabled' denotes that the
|
|
OSPFv3 Process is active on at least one inter-
|
|
face; 'disabled' disables it on all inter-
|
|
faces."
|
|
::= { rcOspfv3GeneralGroup 2 }
|
|
|
|
rcOspfv3VersionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER { version3(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of OSPF for IPv6 is 3."
|
|
::= { rcOspfv3GeneralGroup 3 }
|
|
|
|
rcOspfv3AreaBdrRtrStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether this router is an area
|
|
border router."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 3 Splitting the AS into
|
|
Areas"
|
|
::= { rcOspfv3GeneralGroup 4 }
|
|
|
|
rcOspfv3ASBdrRtrStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to note whether this router is config-
|
|
ured as an Autonomous System border router."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 3.3 Classification of
|
|
routers"
|
|
::= { rcOspfv3GeneralGroup 5 }
|
|
|
|
rcOspfv3AsScopeLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of AS-Scope (e.g. AS-External) link-state
|
|
advertisements in the link-state database."
|
|
::= { rcOspfv3GeneralGroup 6 }
|
|
|
|
rcOspfv3AsScopeLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the LS checksums of
|
|
the AS-scoped link-state advertisements con-
|
|
tained in the link-state database. This sum
|
|
can be used to determine if there has been a
|
|
change in a router's link state database, and
|
|
to compare the link-state database of two
|
|
routers."
|
|
::= { rcOspfv3GeneralGroup 7 }
|
|
|
|
rcOspfv3OriginateNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of new link-state advertisements
|
|
that have been originated. This number is in-
|
|
cremented each time the router originates a new
|
|
LSA."
|
|
::= { rcOspfv3GeneralGroup 8 }
|
|
|
|
rcOspfv3RxNewLsas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of link-state advertisements re-
|
|
ceived determined to be new instantiations.
|
|
This number does not include newer instantia-
|
|
tions of self-originated link-state advertise-
|
|
ments."
|
|
::= { rcOspfv3GeneralGroup 9 }
|
|
|
|
rcOspfv3ExtLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of External(LS type 0x4005) in the link-
|
|
state database"
|
|
::= { rcOspfv3GeneralGroup 10 }
|
|
|
|
|
|
rcOspfv3ExtAreaLsdbLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..'7FFFFFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of non-default AS-
|
|
external-LSAs entries that can be stored in the
|
|
link-state database. If the value is -1, then
|
|
there is no limit.
|
|
|
|
When the number of non-default AS-external-LSAs
|
|
in a router's link-state database reaches
|
|
rcOspfv3ExtAreaLsdbLimit, the router enters Overflow-
|
|
State. The router never holds more than
|
|
rcOspfv3ExtAreaLsdbLimit non-default AS-external-LSAs
|
|
in its database. OspfExtAreaLsdbLimit MUST be set
|
|
identically in all routers attached to the OSPFv3
|
|
backbone and/or any regular OSPFv3 area. (i.e.,
|
|
OSPFv3 stub areas and NSSAs are excluded)."
|
|
::= { rcOspfv3GeneralGroup 11 }
|
|
|
|
rcOspfv3MulticastExtensions OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
intraAreaMulticast(0),
|
|
interAreaMulticast(1),
|
|
interAsMulticast(2)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A Bit Mask indicating whether the router is
|
|
forwarding IPv6 multicast datagrams
|
|
based on the algorithms defined in the Multi-
|
|
cast Extensions to OSPF.
|
|
|
|
If intraAreaMulticast set, indicates that the router
|
|
can forward IPv6 multicast datagrams in the router's
|
|
directly attached areas (called intra-area mul-
|
|
ticast routing).
|
|
|
|
If interAreaMulticast set, indicates that the router
|
|
can forward IPv6 multicast datagrams between OSPFv3
|
|
areas (called inter-area multicast routing).
|
|
|
|
If interAsMulticast set, indicates that the router can
|
|
forward IPv6 multicast datagrams between Auto-
|
|
nomous Systems (called inter-AS multicast rout-
|
|
ing).
|
|
|
|
Only certain combinations of bit settings are
|
|
allowed, namely:
|
|
- All bits cleared (no multicasting)
|
|
- intraAreaMulticast only,
|
|
- intraAreaMulticast and interAreaMulticast,
|
|
- intraAreaMulticast and interAsMulticast
|
|
- intraAreaMulticast, interAreaMulticast and
|
|
interAsMulticast
|
|
By default, all bits are cleared."
|
|
::= { rcOspfv3GeneralGroup 12 }
|
|
|
|
rcOspfv3ExitOverflowInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that, after entering
|
|
OverflowState, a router will attempt to leave
|
|
OverflowState. This allows the router to again
|
|
originate non-default AS-External-LSAs. When
|
|
set to 0, the router will not leave Overflow-
|
|
State until restarted."
|
|
::= { rcOspfv3GeneralGroup 13 }
|
|
|
|
rcOspfv3DemandExtensions OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for demand routing."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix on Demand Routing"
|
|
::= { rcOspfv3GeneralGroup 14 }
|
|
|
|
rcOspfv3TrafficEngineeringSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for traffic engineering
|
|
extensions."
|
|
::= { rcOspfv3GeneralGroup 15 }
|
|
|
|
rcOspfv3ReferenceBandwidth OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reference bandwidth in kilobits/second for
|
|
calculating default interface metrics. The
|
|
default value is 100,000 KBPS (100 MBPS)"
|
|
::= { rcOspfv3GeneralGroup 16 }
|
|
|
|
rcOspfv3RestartSupport OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1),
|
|
plannedOnly (2),
|
|
plannedAndUnplanned (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's support for OSPF hitless restart.
|
|
Options include: no restart support, only planned
|
|
restarts or both planned and unplanned restarts."
|
|
::= { rcOspfv3GeneralGroup 17 }
|
|
|
|
rcOspfv3RestartInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1800)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured OSPF hitless restart timeout interval."
|
|
::= { rcOspfv3GeneralGroup 18 }
|
|
|
|
rcOspfv3RestartStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { notRestarting (1),
|
|
plannedRestart (2),
|
|
unplannedRestart (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current status of OSPF hitless restart."
|
|
::= { rcOspfv3GeneralGroup 19 }
|
|
|
|
rcOspfv3RestartAge OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1800)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remaining time in current OSPF hitless restart
|
|
interval."
|
|
::= { rcOspfv3GeneralGroup 20 }
|
|
|
|
rcOspfv3RestartExitReason OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1), -- none attempted
|
|
inProgress (2), -- restart in
|
|
-- progress
|
|
completed (3), -- successfully
|
|
-- completed
|
|
timedOut (4), -- timed out
|
|
topologyChanged (5) -- aborted due to
|
|
-- topologychange.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the outcome of the last attempt at a
|
|
hitless restart. If the value is 'none', no restart
|
|
has yet been attempted. If the value is 'inProgress',
|
|
a restart attempt is currently underway."
|
|
::= { rcOspfv3GeneralGroup 21 }
|
|
|
|
rcOspfv3BadLsaIgnore OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled (1), disabled (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of OSPFv3 in the
|
|
router. The value 'enabled' denotes that the
|
|
OSPFv3 Process is active on at least one inter-
|
|
face; 'disabled' disables it on all inter-
|
|
faces."
|
|
::= { rcOspfv3GeneralGroup 22}
|
|
|
|
rcOspfv3HelperModeDisable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Disables Graceful Restart Helper Mode feature.
|
|
The feature is enabled by default (so this flag
|
|
is disabled by default)."
|
|
DEFVAL { false }
|
|
::= { rcOspfv3GeneralGroup 23 }
|
|
|
|
|
|
rcOspfv3DefaultMetric OBJECT IDENTIFIER ::= { rcOspfv3GeneralGroup 24 }
|
|
|
|
rcOspfv3DefaultMetric10MegPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
10Meg Interface(Port)."
|
|
DEFVAL { 100 }
|
|
::= { rcOspfv3DefaultMetric 1 }
|
|
|
|
rcOspfv3DefaultMetric100MegPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
100Meg Interface(Port)."
|
|
DEFVAL { 10 }
|
|
::= { rcOspfv3DefaultMetric 2 }
|
|
|
|
rcOspfv3DefaultMetric1000MegPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
1000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcOspfv3DefaultMetric 3 }
|
|
|
|
rcOspfv3DefaultMetric10000MegPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
10000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcOspfv3DefaultMetric 4 }
|
|
|
|
rcOspfv3DefaultMetric40000MegPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
40000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcOspfv3DefaultMetric 5 }
|
|
|
|
rcOspfv3DefaultMetricVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
Vlan Interface"
|
|
DEFVAL { 10 }
|
|
::= { rcOspfv3DefaultMetric 6 }
|
|
|
|
rcOspfv3DefaultMetric100000MegPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
100000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcOspfv3DefaultMetric 7 }
|
|
|
|
rcOspfv3DefaultMetric25000MegPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cost associated with
|
|
25000Meg Interface(Port)."
|
|
DEFVAL { 1 }
|
|
::= { rcOspfv3DefaultMetric 8 }
|
|
|
|
-- The OSPFv3 Area Data Structure contains information
|
|
-- regarding the various areas. The interfaces and
|
|
-- virtual links are configured as part of these areas.
|
|
-- Area 0.0.0.0, by definition, is the Backbone Area
|
|
|
|
rcOspfv3AreaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3AreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parame-
|
|
ters and cumulative statistics of the router's
|
|
attached areas."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 6 The Area Data Struc-
|
|
ture"
|
|
::= { rcOspfv3Objects 2 }
|
|
|
|
rcOspfv3AreaEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3AreaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configured parame-
|
|
ters and cumulative statistics of one of the
|
|
router's attached areas."
|
|
INDEX { rcOspfv3AreaId }
|
|
::= { rcOspfv3AreaTable 1 }
|
|
|
|
RcOspfv3AreaEntry ::= SEQUENCE {
|
|
rcOspfv3AreaId
|
|
IpAddress,
|
|
rcOspfv3ImportAsExtern
|
|
INTEGER,
|
|
rcOspfv3AreaSpfRuns
|
|
Counter32,
|
|
rcOspfv3AreaBdrRtrCount
|
|
Gauge32,
|
|
rcOspfv3AreaAsBdrRtrCount
|
|
Gauge32,
|
|
rcOspfv3AreaScopeLsaCount
|
|
Gauge32,
|
|
rcOspfv3AreaScopeLsaCksumSum
|
|
Integer32,
|
|
rcOspfv3AreaSummary
|
|
INTEGER,
|
|
rcOspfv3AreaStatus
|
|
RowStatus,
|
|
rcOspfv3StubMetric
|
|
Integer32,
|
|
rcOspfv3AreaNssaTranslatorRole
|
|
INTEGER,
|
|
rcOspfv3AreaNssaTranslatorState
|
|
INTEGER,
|
|
rcOspfv3AreaNssaTranslatorStabilityInterval
|
|
Unsigned32,
|
|
rcOspfv3AreaNssaTranslatorEvents
|
|
Counter32,
|
|
rcOspfv3AreaStubMetricType
|
|
INTEGER
|
|
}
|
|
|
|
rcOspfv3AreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying an area.
|
|
Area ID 0.0.0.0 is used for the OSPFv3 backbone."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcOspfv3AreaEntry 1 }
|
|
|
|
rcOspfv3ImportAsExtern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
importExternal(1), -- normal area
|
|
importNoExternal(2), -- stub area
|
|
importNssa(3) -- not-so-stubby-area
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether an area is a Stub area, NSSA, or
|
|
standard area. AS-scope LSAs are not imported into Stub
|
|
Areas or NSSAs. NSSAs import AS-External data as Type-7
|
|
LSAs which have Area-scope"
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
DEFVAL { importExternal }
|
|
::= { rcOspfv3AreaEntry 2 }
|
|
|
|
rcOspfv3AreaSpfRuns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that the intra-area route
|
|
table has been calculated using this area's
|
|
link-state database. This is typically done
|
|
using Dijkstra's algorithm."
|
|
::= { rcOspfv3AreaEntry 3 }
|
|
|
|
rcOspfv3AreaBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of area border routers reach-
|
|
able within this area. This is initially zero,
|
|
and is calculated in each SPF Pass."
|
|
::= { rcOspfv3AreaEntry 4 }
|
|
|
|
rcOspfv3AreaAsBdrRtrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Autonomous System border
|
|
routers reachable within this area. This is
|
|
initially zero, and is calculated in each SPF
|
|
Pass."
|
|
::= { rcOspfv3AreaEntry 5 }
|
|
|
|
rcOspfv3AreaScopeLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Area-Scope link-state
|
|
advertisements in this area's link-state
|
|
database."
|
|
::= { rcOspfv3AreaEntry 6 }
|
|
|
|
rcOspfv3AreaScopeLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the Area-Scope link-state
|
|
advertisements' LS checksums contained in this
|
|
area's link-state database. The sum can be used
|
|
to determine if there has been a change in a
|
|
router's link state database, and to compare the
|
|
link-state database of two routers."
|
|
::= { rcOspfv3AreaEntry 7 }
|
|
|
|
rcOspfv3AreaSummary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAreaSummary(1),
|
|
sendAreaSummary(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable rcOspfv3AreaSummary controls the im-
|
|
port of Inter-Area LSAs into stub areas. It has
|
|
no effect on other areas.
|
|
|
|
If it is noAreaSummary, the router will neither
|
|
originate nor propagate Inter-Area LSAs into the
|
|
stub area. It will rely entirely on its de-
|
|
fault route.
|
|
|
|
If it is sendAreaSummary, the router will both
|
|
summarize and propagate Inter-Area LSAs."
|
|
DEFVAL { sendAreaSummary }
|
|
::= { rcOspfv3AreaEntry 8 }
|
|
|
|
rcOspfv3AreaStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable controls the status of the en-
|
|
try. The use of RowStatus is covered in more detail
|
|
in [6]."
|
|
::= { rcOspfv3AreaEntry 9 }
|
|
|
|
rcOspfv3StubMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'FFFFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value advertised for the default route
|
|
into Stub and NSSA areas."
|
|
::= { rcOspfv3AreaEntry 10 }
|
|
|
|
rcOspfv3AreaNssaTranslatorRole OBJECT-TYPE
|
|
SYNTAX INTEGER { always(1), candidate(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates an NSSA Border router's ability to
|
|
perform NSSA translation of type-7 LSAs into
|
|
type-5 LSAs."
|
|
DEFVAL { candidate }
|
|
::= { rcOspfv3AreaEntry 11 }
|
|
|
|
rcOspfv3AreaNssaTranslatorState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
elected(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if and how an NSSA Border router is
|
|
performing NSSA translation of type-7 LSAs into type-5
|
|
LSAs. When this object is set to enabled, the NSSA
|
|
Border router's rcOspfv3AreaNssTranslatorRole
|
|
has been set to always. When this object is set to
|
|
elected, a candidate NSSA Border router is translating
|
|
type-7 LSAs into type-5. When this object is set to
|
|
disabled, a candidate NSSA Border router is NOT
|
|
translating type-7 LSAs into type-5."
|
|
::= { rcOspfv3AreaEntry 12 }
|
|
|
|
rcOspfv3AreaNssaTranslatorStabilityInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds after an elected translator
|
|
determines its services are no longer required, that
|
|
it should continue to perform its translation duties."
|
|
DEFVAL { 40 }
|
|
::= { rcOspfv3AreaEntry 13 }
|
|
|
|
rcOspfv3AreaNssaTranslatorEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of Translator State changes
|
|
that have occurred since the last boot-up."
|
|
::= { rcOspfv3AreaEntry 14 }
|
|
|
|
rcOspfv3AreaStubMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ospfv3Metric (1), -- OSPF Metric
|
|
comparableCost (2), -- external type 1
|
|
nonComparable (3) -- external type 2
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the type of metric ad-
|
|
vertised as a default route."
|
|
DEFVAL { ospfv3Metric }
|
|
::= { rcOspfv3AreaEntry 15 }
|
|
|
|
-- OSPFv3 AS-Scope Link State Database
|
|
|
|
-- The Link State Database contains the AS-Scope Link State
|
|
-- Advertisements from throughout the areas that the
|
|
-- device is attached to.
|
|
|
|
rcOspfv3AsLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3AsLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Process's AS-Scope Link State Database."
|
|
::= { rcOspfv3Objects 3 }
|
|
|
|
rcOspfv3AsLsdbEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3AsLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single AS-Scope Link State Advertisement."
|
|
INDEX { rcOspfv3AsLsdbType,
|
|
rcOspfv3AsLsdbRouterId,
|
|
rcOspfv3AsLsdbLsid }
|
|
::= { rcOspfv3AsLsdbTable 1 }
|
|
|
|
RcOspfv3AsLsdbEntry ::= SEQUENCE {
|
|
rcOspfv3AsLsdbType
|
|
INTEGER,
|
|
rcOspfv3AsLsdbRouterId
|
|
IpAddress,
|
|
rcOspfv3AsLsdbLsid
|
|
Unsigned32,
|
|
rcOspfv3AsLsdbSequence
|
|
Integer32,
|
|
rcOspfv3AsLsdbAge
|
|
Integer32,
|
|
rcOspfv3AsLsdbChecksum
|
|
Integer32,
|
|
rcOspfv3AsLsdbAdvertisement
|
|
OCTET STRING,
|
|
rcOspfv3AsLsdbTypeKnown
|
|
TruthValue
|
|
}
|
|
|
|
rcOspfv3AsLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
linkLsa (8),
|
|
routerLink (8193),
|
|
networkLink (8194),
|
|
interAreaPrefix (8195),
|
|
interAreaRouter (8196),
|
|
type7 (8199),
|
|
intraAreaPrefix (8201),
|
|
asExternal (16389)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertise-
|
|
ment format. AS-Scope LSAs not recognized by
|
|
the router may be stored in the database."
|
|
::= { rcOspfv3AsLsdbEntry 1 }
|
|
|
|
rcOspfv3AsLsdbRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rcOspfv3AsLsdbEntry 2 }
|
|
|
|
rcOspfv3AsLsdbLsid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing a unique identifier;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement.
|
|
In contrast to OSPFv2, the LSID has no
|
|
addressing semantics."
|
|
::= { rcOspfv3AsLsdbEntry 3 }
|
|
|
|
-- Note that the OSPF Sequence Number is a 32 bit signed
|
|
-- integer. It starts with the value '80000001'h,
|
|
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
|
|
-- Thus, a typical sequence number will be very negative.
|
|
|
|
rcOspfv3AsLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and dupli-
|
|
cate link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { rcOspfv3AsLsdbEntry 4 }
|
|
|
|
rcOspfv3AsLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
-- unless DoNotAge bit is set
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state adver-
|
|
tisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rcOspfv3AsLsdbEntry 5 }
|
|
|
|
rcOspfv3AsLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO connec-
|
|
tionless datagrams; it is commonly referred to
|
|
as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rcOspfv3AsLsdbEntry 6 }
|
|
|
|
rcOspfv3AsLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..65535))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including
|
|
its header."
|
|
::= { rcOspfv3AsLsdbEntry 7 }
|
|
|
|
rcOspfv3AsLsdbTypeKnown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is the LSA type recognized by this Router?"
|
|
::= { rcOspfv3AsLsdbEntry 8 }
|
|
|
|
|
|
-- OSPFv3 Area-Scope Link State Database
|
|
|
|
-- The Link State Database contains the Area-Scope Link State
|
|
-- Advertisements from throughout the area that the
|
|
-- device is attached to.
|
|
|
|
rcOspfv3AreaLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3AreaLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Process's Area-Scope Link State Database."
|
|
::= { rcOspfv3Objects 4 }
|
|
|
|
rcOspfv3AreaLsdbEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3AreaLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single Area-Scope Link State Advertisement."
|
|
INDEX { rcOspfv3AreaLsdbAreaId,
|
|
rcOspfv3AreaLsdbType,
|
|
rcOspfv3AreaLsdbRouterId,
|
|
rcOspfv3AreaLsdbLsid }
|
|
::= { rcOspfv3AreaLsdbTable 1 }
|
|
|
|
RcOspfv3AreaLsdbEntry ::= SEQUENCE {
|
|
rcOspfv3AreaLsdbAreaId
|
|
IpAddress,
|
|
rcOspfv3AreaLsdbType
|
|
INTEGER,
|
|
rcOspfv3AreaLsdbRouterId
|
|
IpAddress,
|
|
rcOspfv3AreaLsdbLsid
|
|
Unsigned32,
|
|
rcOspfv3AreaLsdbSequence
|
|
Integer32,
|
|
rcOspfv3AreaLsdbAge
|
|
Integer32,
|
|
rcOspfv3AreaLsdbChecksum
|
|
Integer32,
|
|
rcOspfv3AreaLsdbAdvertisement
|
|
OCTET STRING,
|
|
rcOspfv3AreaLsdbTypeKnown
|
|
TruthValue
|
|
}
|
|
|
|
rcOspfv3AreaLsdbAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Area from which the
|
|
LSA was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcOspfv3AreaLsdbEntry 1 }
|
|
|
|
rcOspfv3AreaLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
linkLsa (8),
|
|
routerLink (8193),
|
|
networkLink (8194),
|
|
interAreaPrefix (8195),
|
|
interAreaRouter (8196),
|
|
type7 (8199),
|
|
intraAreaPrefix (8201),
|
|
asExternal (16389)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertise-
|
|
ment format. Area-Scope LSAs unrecognized by the
|
|
router are also stored in this database."
|
|
::= { rcOspfv3AreaLsdbEntry 2 }
|
|
|
|
rcOspfv3AreaLsdbRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rcOspfv3AreaLsdbEntry 3 }
|
|
|
|
rcOspfv3AreaLsdbLsid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing a unique identifier;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement.
|
|
In contrast to OSPFv2, the LSID has no
|
|
addressing semantics."
|
|
::= { rcOspfv3AreaLsdbEntry 4 }
|
|
|
|
-- Note that the OSPF Sequence Number is a 32 bit signed
|
|
-- integer. It starts with the value '80000001'h,
|
|
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
|
|
-- Thus, a typical sequence number will be very negative.
|
|
|
|
rcOspfv3AreaLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and dupli-
|
|
cate link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { rcOspfv3AreaLsdbEntry 5 }
|
|
|
|
rcOspfv3AreaLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
-- unless DoNotAge bit is set
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state adver-
|
|
tisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rcOspfv3AreaLsdbEntry 6 }
|
|
|
|
rcOspfv3AreaLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO connec-
|
|
tionless datagrams; it is commonly referred to
|
|
as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rcOspfv3AreaLsdbEntry 7 }
|
|
|
|
rcOspfv3AreaLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..65535))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including
|
|
its header."
|
|
::= { rcOspfv3AreaLsdbEntry 8 }
|
|
|
|
rcOspfv3AreaLsdbTypeKnown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is the LSA type recognized by this Router?"
|
|
::= { rcOspfv3AreaLsdbEntry 9 }
|
|
|
|
-- OSPFv3 Link-Scope Link State Database
|
|
|
|
-- The Link State Database contains the Link-Scope Link State
|
|
-- Advertisements from the links that the
|
|
-- device is attached to.
|
|
|
|
rcOspfv3LinkLsdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3LinkLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Process's Link-Scope Link State Database."
|
|
::= { rcOspfv3Objects 5 }
|
|
|
|
rcOspfv3LinkLsdbEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3LinkLsdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single Link-Scope Link State Advertisement."
|
|
INDEX { rcOspfv3LinkLsdbIfIndex,
|
|
rcOspfv3LinkLsdbType,
|
|
rcOspfv3LinkLsdbRouterId,
|
|
rcOspfv3LinkLsdbLsid }
|
|
::= { rcOspfv3LinkLsdbTable 1 }
|
|
|
|
RcOspfv3LinkLsdbEntry ::= SEQUENCE {
|
|
rcOspfv3LinkLsdbIfIndex
|
|
InterfaceIndex,
|
|
rcOspfv3LinkLsdbType
|
|
INTEGER,
|
|
rcOspfv3LinkLsdbRouterId
|
|
IpAddress,
|
|
rcOspfv3LinkLsdbLsid
|
|
Unsigned32,
|
|
rcOspfv3LinkLsdbSequence
|
|
Integer32,
|
|
rcOspfv3LinkLsdbAge
|
|
Integer32,
|
|
rcOspfv3LinkLsdbChecksum
|
|
Integer32,
|
|
rcOspfv3LinkLsdbAdvertisement
|
|
OCTET STRING,
|
|
rcOspfv3LinkLsdbTypeKnown
|
|
TruthValue
|
|
}
|
|
|
|
rcOspfv3LinkLsdbIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier of the link from which the LSA
|
|
was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcOspfv3LinkLsdbEntry 1 }
|
|
|
|
rcOspfv3LinkLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
linkLsa (8),
|
|
routerLink (8193),
|
|
networkLink (8194),
|
|
interAreaPrefix (8195),
|
|
interAreaRouter (8196),
|
|
type7 (8199),
|
|
intraAreaPrefix (8201),
|
|
asExternal (16389)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the link state advertisement.
|
|
Each link state type has a separate advertise-
|
|
ment format. Link-Scope LSAs unrecognized by the
|
|
router are also stored in this database."
|
|
::= { rcOspfv3LinkLsdbEntry 2 }
|
|
|
|
rcOspfv3LinkLsdbRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rcOspfv3LinkLsdbEntry 3 }
|
|
|
|
rcOspfv3LinkLsdbLsid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing a unique identifier;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement.
|
|
In contrast to OSPFv2, the LSID has no
|
|
addressing semantics."
|
|
::= { rcOspfv3LinkLsdbEntry 4 }
|
|
|
|
-- Note that the OSPF Sequence Number is a 32 bit signed
|
|
-- integer. It starts with the value '80000001'h,
|
|
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
|
|
-- Thus, a typical sequence number will be very negative.
|
|
|
|
rcOspfv3LinkLsdbSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and dupli-
|
|
cate link state advertisements. The space of
|
|
sequence numbers is linearly ordered. The
|
|
larger the sequence number the more recent the
|
|
advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence
|
|
number"
|
|
::= { rcOspfv3LinkLsdbEntry 5 }
|
|
|
|
rcOspfv3LinkLsdbAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
-- unless DoNotAge bit is set
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rcOspfv3LinkLsdbEntry 6 }
|
|
|
|
rcOspfv3LinkLsdbChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete
|
|
contents of the advertisement, excepting the
|
|
age field. The age field is excepted so that
|
|
an advertisement's age can be incremented
|
|
without updating the checksum. The checksum
|
|
used is the same that is used for ISO connec-
|
|
tionless datagrams; it is commonly referred to
|
|
as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rcOspfv3LinkLsdbEntry 7 }
|
|
|
|
rcOspfv3LinkLsdbAdvertisement OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..65535))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entire Link State Advertisement, including
|
|
its header."
|
|
::= { rcOspfv3LinkLsdbEntry 8 }
|
|
|
|
rcOspfv3LinkLsdbTypeKnown OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the LSA type is recognized by this
|
|
Router."
|
|
::= { rcOspfv3LinkLsdbEntry 9 }
|
|
|
|
|
|
-- OSPF Host Table
|
|
|
|
-- The Host/Metric Table indicates what hosts are directly
|
|
-- attached to the Router, and what metrics and types of
|
|
-- service should be advertised for them.
|
|
|
|
rcOspfv3HostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3HostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of Hosts, and their metrics, that the
|
|
router will advertise as host routes."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route param-
|
|
eters"
|
|
::= { rcOspfv3Objects 6 }
|
|
|
|
rcOspfv3HostEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3HostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A metric to be advertised when a given host is
|
|
reachable."
|
|
INDEX { rcOspfv3HostAddressType,
|
|
rcOspfv3HostAddress }
|
|
::= { rcOspfv3HostTable 1 }
|
|
|
|
RcOspfv3HostEntry ::= SEQUENCE {
|
|
rcOspfv3HostAddressType
|
|
INTEGER,
|
|
rcOspfv3HostAddress
|
|
OCTET STRING,
|
|
rcOspfv3HostMetric
|
|
Integer32,
|
|
rcOspfv3HostStatus
|
|
RowStatus,
|
|
rcOspfv3HostAreaID
|
|
IpAddress
|
|
}
|
|
|
|
rcOspfv3HostAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
ipv4(1),
|
|
ipv6(2),
|
|
ipv4z(3),
|
|
ipv6z(4),
|
|
dns(16)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of rcOspfv3HostAddress. Only IPv6
|
|
addresses without zone index are expected."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route parame-
|
|
ters"
|
|
::= { rcOspfv3HostEntry 1 }
|
|
|
|
|
|
rcOspfv3HostAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 Address of the Host. Must be a Global
|
|
or Site-local address."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route parame-
|
|
ters"
|
|
::= { rcOspfv3HostEntry 2 }
|
|
|
|
rcOspfv3HostMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Metric to be advertised."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.6 Host route parame-
|
|
ters"
|
|
::= { rcOspfv3HostEntry 3 }
|
|
|
|
rcOspfv3HostStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable controls the status of the en-
|
|
try. The use of RowStatus is covered in more detail
|
|
in [6]."
|
|
::= { rcOspfv3HostEntry 4 }
|
|
|
|
rcOspfv3HostAreaID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Area the Host Entry is to be found within.
|
|
By default, the area that a subsuming OSPFv3 in-
|
|
terface is in, or 0.0.0.0"
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcOspfv3HostEntry 5 }
|
|
|
|
-- OSPFv3 Interface Table
|
|
|
|
rcOspfv3IfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface Table describes the inter-
|
|
faces from the viewpoint of OSPFv3."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters"
|
|
::= { rcOspfv3Objects 7 }
|
|
|
|
rcOspfv3IfEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface Entry describes one inter-
|
|
face from the viewpoint of OSPFv3."
|
|
INDEX { rcOspfv3IfIndex }
|
|
::= { rcOspfv3IfTable 1 }
|
|
|
|
|
|
RcOspfv3IfEntry ::= SEQUENCE {
|
|
rcOspfv3IfIndex
|
|
InterfaceIndex,
|
|
rcOspfv3IfAreaId
|
|
IpAddress,
|
|
rcOspfv3IfType
|
|
INTEGER,
|
|
rcOspfv3IfAdminStat
|
|
INTEGER,
|
|
rcOspfv3IfRtrPriority
|
|
Integer32,
|
|
rcOspfv3IfTransitDelay
|
|
Integer32,
|
|
rcOspfv3IfRetransInterval
|
|
Integer32,
|
|
rcOspfv3IfHelloInterval
|
|
Integer32,
|
|
rcOspfv3IfRtrDeadInterval
|
|
Integer32,
|
|
rcOspfv3IfPollInterval
|
|
Unsigned32,
|
|
rcOspfv3IfState
|
|
INTEGER,
|
|
rcOspfv3IfDesignatedRouter
|
|
IpAddress,
|
|
rcOspfv3IfBackupDesignatedRouter
|
|
IpAddress,
|
|
rcOspfv3IfEvents
|
|
Counter32,
|
|
rcOspfv3IfStatus
|
|
RowStatus,
|
|
rcOspfv3IfMulticastForwarding
|
|
INTEGER,
|
|
rcOspfv3IfDemand
|
|
TruthValue,
|
|
rcOspfv3IfMetricValue
|
|
Integer32,
|
|
rcOspfv3IfLinkScopeLsaCount
|
|
Gauge32,
|
|
rcOspfv3IfLinkLsaCksumSum
|
|
Integer32,
|
|
rcOspfv3IfInstId
|
|
Integer32,
|
|
rcOspfv3IfDemandNbrProbe
|
|
TruthValue,
|
|
rcOspfv3IfDemandNbrProbeRetxLimit
|
|
Unsigned32,
|
|
rcOspfv3IfDemandNbrProbeInterval
|
|
Unsigned32,
|
|
rcOspfv3IfBfdEnable
|
|
EnableValue,
|
|
rcOspfv3IfLinkLsaSuppression
|
|
EnableValue
|
|
}
|
|
|
|
rcOspfv3IfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of this OSPFv3 interface.
|
|
It corresponds to the interface index of the
|
|
IPv6 interface on which OSPFv3 is configured."
|
|
::= { rcOspfv3IfEntry 1 }
|
|
|
|
rcOspfv3IfAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the area
|
|
to which the interface connects. Area ID
|
|
0.0.0.0 is used for the OSPFv3 backbone."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcOspfv3IfEntry 2 }
|
|
|
|
rcOspfv3IfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast(1),
|
|
nbma(2),
|
|
pointToPoint(3),
|
|
pointToMultipoint(5),
|
|
passive(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface type."
|
|
::= { rcOspfv3IfEntry 3 }
|
|
|
|
rcOspfv3IfAdminStat OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled (1), disabled (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 interface's administrative status.
|
|
The value formed on the interface, and the in-
|
|
terface will be advertised as an internal route
|
|
to some area. The value 'disabled' denotes
|
|
that the interface is external to OSPFv3."
|
|
DEFVAL { enabled }
|
|
::= { rcOspfv3IfEntry 4 }
|
|
|
|
rcOspfv3IfRtrPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'FF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this interface. Used in
|
|
multi-access networks, this field is used in
|
|
the designated router election algorithm. The
|
|
value 0 signifies that the router is not eligi-
|
|
ble to become the designated router on this
|
|
particular network. In the event of a tie in
|
|
this value, routers will use their Router ID as
|
|
a tie breaker."
|
|
DEFVAL { 1 }
|
|
::= { rcOspfv3IfEntry 5 }
|
|
|
|
rcOspfv3IfTransitDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1800)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to
|
|
transmit a link state update packet over this
|
|
interface."
|
|
DEFVAL { 1 }
|
|
::= { rcOspfv3IfEntry 6 }
|
|
|
|
rcOspfv3IfRetransInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1800)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link-state ad-
|
|
vertisement retransmissions, for adjacencies
|
|
belonging to this interface. This value is
|
|
also used when retransmitting database descrip-
|
|
tion and link-state request packets."
|
|
DEFVAL { 5 }
|
|
::= { rcOspfv3IfEntry 7 }
|
|
|
|
rcOspfv3IfHelloInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the
|
|
Hello packets that the router sends on the in-
|
|
terface. This value must be the same for all
|
|
routers attached to a common network."
|
|
DEFVAL { 10 }
|
|
::= { rcOspfv3IfEntry 8 }
|
|
|
|
rcOspfv3IfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello
|
|
packets have not been seen before it's neigh-
|
|
bors declare the router down. This should be
|
|
some multiple of the Hello interval. This
|
|
value must be the same for all routers attached
|
|
to a common network."
|
|
DEFVAL { 40 }
|
|
::= { rcOspfv3IfEntry 9 }
|
|
|
|
rcOspfv3IfPollInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The larger time interval, in seconds, between
|
|
the Hello packets sent to an inactive non-
|
|
broadcast multi- access neighbor."
|
|
DEFVAL { 120 }
|
|
::= { rcOspfv3IfEntry 10 }
|
|
|
|
rcOspfv3IfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
loopback(2),
|
|
waiting(3),
|
|
pointToPoint(4),
|
|
designatedRouter(5),
|
|
backupDesignatedRouter(6),
|
|
otherDesignatedRouter(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface State."
|
|
::= { rcOspfv3IfEntry 11 }
|
|
|
|
rcOspfv3IfDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the Designated Router."
|
|
::= { rcOspfv3IfEntry 12 }
|
|
|
|
rcOspfv3IfBackupDesignatedRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the Backup Designated
|
|
Router."
|
|
::= { rcOspfv3IfEntry 14 }
|
|
|
|
rcOspfv3IfEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this OSPF interface has
|
|
changed its state, or an error has occurred."
|
|
::= { rcOspfv3IfEntry 15 }
|
|
|
|
rcOspfv3IfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable controls the status of the en-
|
|
try. The use of RowStatus is covered in more detail in
|
|
[6]."
|
|
::= { rcOspfv3IfEntry 17 }
|
|
|
|
rcOspfv3IfMulticastForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blocked(1), -- no multicast forwarding
|
|
multicast(2), -- using multicast address
|
|
unicast(3) -- to each OSPFv3 neighbor
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The way multicasts should forwarded on this
|
|
interface; not forwarded, forwarded as data
|
|
link multicasts, or forwarded as data link uni-
|
|
casts. Data link multicasting is not meaning-
|
|
ful on point to point and NBMA interfaces, and
|
|
setting rcOspfv3MulticastForwarding to 0 effective-
|
|
ly disables all multicast forwarding."
|
|
DEFVAL { blocked }
|
|
::= { rcOspfv3IfEntry 18 }
|
|
|
|
rcOspfv3IfDemand OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Demand OSPFv3 procedures (hel-
|
|
lo suppression to FULL neighbors and setting the
|
|
DoNotAge flag on propagated LSAs) should be per-
|
|
formed on this interface."
|
|
DEFVAL { false }
|
|
::= { rcOspfv3IfEntry 19 }
|
|
|
|
rcOspfv3IfMetricValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric assigned to this interface.
|
|
The default value of the Metric is
|
|
Reference Bandwidth / ifSpeed. The value of the
|
|
reference bandwidth is configured by the
|
|
rcOspfv3ReferenceBandwidth object. A value of '0' means
|
|
the metric value of this interface will depend on the speed
|
|
of the interface, when the state of the interface is up.
|
|
The default (0) metric for Vlan and Tunnel is 10."
|
|
|
|
::= { rcOspfv3IfEntry 20 }
|
|
|
|
rcOspfv3IfLinkScopeLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link-Scope link-state
|
|
advertisements in this link's link-state database."
|
|
::= { rcOspfv3IfEntry 21 }
|
|
|
|
rcOspfv3IfLinkLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the Link-Scope link-state
|
|
advertisements' LS checksums contained in this
|
|
link's link-state database. The sum can be used
|
|
to determine if there has been a change in a
|
|
router's link state database, and to compare the
|
|
link-state database of two routers."
|
|
::= { rcOspfv3IfEntry 22 }
|
|
|
|
rcOspfv3IfInstId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables multiple instances of OSPFv3 to be run over
|
|
a single link. Each protocol instance would be assigned
|
|
a separate ID. This ID has local link significance
|
|
only."
|
|
DEFVAL { 0 }
|
|
::= { rcOspfv3IfEntry 23 }
|
|
|
|
rcOspfv3IfDemandNbrProbe OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Indicates whether or not neighbor probing is
|
|
enabled to determine whether or not the neighbor
|
|
is inactive. Neighbor probing is disabled by
|
|
default."
|
|
DEFVAL { false }
|
|
::= { rcOspfv3IfEntry 24 }
|
|
|
|
rcOspfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The number of consecutive LSA retransmissions before
|
|
the neighbor is deemed inactive and the neighbor
|
|
adjacency is brought down."
|
|
DEFVAL { 10 }
|
|
::= { rcOspfv3IfEntry 25 }
|
|
|
|
rcOspfv3IfDemandNbrProbeInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Defines how often the neighbor will be probed."
|
|
DEFVAL { 120 }
|
|
::= { rcOspfv3IfEntry 26 }
|
|
|
|
rcOspfv3IfBfdEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Used to enable/disable BFD for OSPFv3."
|
|
DEFVAL { disable }
|
|
::= { rcOspfv3IfEntry 27 }
|
|
|
|
rcOspfv3IfLinkLsaSuppression OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Used to enable/disable link lsa suppression for OSPFv3."
|
|
DEFVAL { disable }
|
|
::= { rcOspfv3IfEntry 28 }
|
|
|
|
-- OSPFv3 Virtual Interface Table
|
|
|
|
-- The Virtual Interface Table describes the virtual
|
|
-- links that the OSPFv3 Process is configured to
|
|
-- carry on.
|
|
|
|
rcOspfv3VirtIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3VirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about this router's virtual inter-
|
|
faces."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.4 Virtual link
|
|
parameters"
|
|
::= { rcOspfv3Objects 8 }
|
|
|
|
rcOspfv3VirtIfEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3VirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single Virtual Interface."
|
|
INDEX { rcOspfv3VirtIfAreaId,
|
|
rcOspfv3VirtIfNeighbor }
|
|
::= { rcOspfv3VirtIfTable 1 }
|
|
|
|
RcOspfv3VirtIfEntry ::= SEQUENCE {
|
|
rcOspfv3VirtIfAreaId
|
|
IpAddress,
|
|
rcOspfv3VirtIfNeighbor
|
|
IpAddress,
|
|
rcOspfv3VirtIfIndex
|
|
Integer32,
|
|
rcOspfv3VirtIfTransitDelay
|
|
Integer32,
|
|
rcOspfv3VirtIfRetransInterval
|
|
Integer32,
|
|
rcOspfv3VirtIfHelloInterval
|
|
Integer32,
|
|
rcOspfv3VirtIfRtrDeadInterval
|
|
Integer32,
|
|
rcOspfv3VirtIfState
|
|
INTEGER,
|
|
rcOspfv3VirtIfEvents
|
|
Counter32,
|
|
rcOspfv3VirtIfStatus
|
|
RowStatus,
|
|
rcOspfv3VirtIfLinkScopeLsaCount
|
|
Gauge32,
|
|
rcOspfv3VirtIfLinkLsaCksumSum
|
|
Integer32
|
|
}
|
|
|
|
rcOspfv3VirtIfAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area that the Virtual Link
|
|
traverses. By definition, this is not 0.0.0.0"
|
|
::= { rcOspfv3VirtIfEntry 1 }
|
|
|
|
rcOspfv3VirtIfNeighbor OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID of the Virtual Neighbor."
|
|
::= { rcOspfv3VirtIfEntry 2 }
|
|
|
|
rcOspfv3VirtIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface ID assigned to this OSPFv3 virtual
|
|
interface. It is advertised in Hello's sent over
|
|
the virtal link and in the router's router-LSAs."
|
|
::= { rcOspfv3VirtIfEntry 3 }
|
|
|
|
rcOspfv3VirtIfTransitDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1800)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimated number of seconds it takes to
|
|
transmit a link- state update packet over this
|
|
interface."
|
|
DEFVAL { 1 }
|
|
::= { rcOspfv3VirtIfEntry 4 }
|
|
|
|
rcOspfv3VirtIfRetransInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1800)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds between link-state ad-
|
|
vertisement retransmissions, for adjacencies
|
|
belonging to this interface. This value is
|
|
also used when retransmitting database descrip-
|
|
tion and link-state request packets. This
|
|
value should be well over the expected round-
|
|
trip time."
|
|
DEFVAL { 5 }
|
|
::= { rcOspfv3VirtIfEntry 5 }
|
|
|
|
rcOspfv3VirtIfHelloInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time, in seconds, between the
|
|
Hello packets that the router sends on the in-
|
|
terface. This value must be the same for the
|
|
virtual neighbor."
|
|
DEFVAL { 10 }
|
|
::= { rcOspfv3VirtIfEntry 6 }
|
|
|
|
rcOspfv3VirtIfRtrDeadInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that a router's Hello
|
|
packets have not been seen before it's neigh-
|
|
bors declare the router down. This should be
|
|
some multiple of the Hello interval. This
|
|
value must be the same for the virtual neigh-
|
|
bor."
|
|
DEFVAL { 60 }
|
|
::= { rcOspfv3VirtIfEntry 7 }
|
|
|
|
rcOspfv3VirtIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1), -- these use the same encoding
|
|
pointToPoint(4) -- as the rcOspfv3IfTable
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSPF virtual interface states."
|
|
::= { rcOspfv3VirtIfEntry 8 }
|
|
|
|
rcOspfv3VirtIfEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of state changes or error events on
|
|
this Virtual Link"
|
|
::= { rcOspfv3VirtIfEntry 9 }
|
|
|
|
rcOspfv3VirtIfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable controls the status of the en-
|
|
try. The use of RowStatus is covered in more detail
|
|
in [6]."
|
|
::= { rcOspfv3VirtIfEntry 10 }
|
|
|
|
rcOspfv3VirtIfLinkScopeLsaCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Link-Scope link-state
|
|
advertisements in this virtual link's link-state
|
|
database."
|
|
::= { rcOspfv3VirtIfEntry 11 }
|
|
|
|
rcOspfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32-bit unsigned sum of the Link-Scope link-state
|
|
advertisements' LS checksums contained in this
|
|
virtual link's link-state database. The sum can be used
|
|
to determine if there has been a change in a
|
|
router's link state database, and to compare the
|
|
link-state database of two routers."
|
|
::= { rcOspfv3VirtIfEntry 12 }
|
|
|
|
|
|
-- OSPFv3 Neighbor Table
|
|
|
|
-- The OSPFv3 Neighbor Table describes all neighbors in
|
|
-- the locality of the subject router.
|
|
|
|
rcOspfv3NbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3NbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of non-virtual neighbor information."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
::= { rcOspfv3Objects 9 }
|
|
|
|
rcOspfv3NbrEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3NbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single neighbor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
INDEX { rcOspfv3NbrIfIndex,
|
|
rcOspfv3NbrRtrId }
|
|
::= { rcOspfv3NbrTable 1 }
|
|
|
|
RcOspfv3NbrEntry ::= SEQUENCE {
|
|
rcOspfv3NbrIfIndex
|
|
InterfaceIndex,
|
|
rcOspfv3NbrRtrId
|
|
IpAddress,
|
|
rcOspfv3NbrAddressType
|
|
INTEGER,
|
|
rcOspfv3NbrAddress
|
|
OCTET STRING,
|
|
rcOspfv3NbrOptions
|
|
Integer32,
|
|
rcOspfv3NbrPriority
|
|
INTEGER,
|
|
rcOspfv3NbrState
|
|
INTEGER,
|
|
rcOspfv3NbrEvents
|
|
Counter32,
|
|
rcOspfv3NbrLsRetransQLen
|
|
Gauge32,
|
|
rcOspfv3NbrHelloSuppressed
|
|
TruthValue,
|
|
rcOspfv3NbrIfId
|
|
Integer32,
|
|
rcOspfv3NbrRestartHelperStatus
|
|
INTEGER,
|
|
rcOspfv3NbrRestartHelperAge
|
|
Integer32,
|
|
rcOspfv3NbrRestartHelperExitReason
|
|
INTEGER,
|
|
rcOspfv3NbrDeadIntCnt
|
|
Integer32
|
|
}
|
|
|
|
rcOspfv3NbrIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local link ID of the link over which the
|
|
neighbor can be reached."
|
|
::= { rcOspfv3NbrEntry 1 }
|
|
|
|
rcOspfv3NbrRtrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer (represented as a type IpAd-
|
|
dress) uniquely identifying the neighboring
|
|
router in the Autonomous System."
|
|
::= { rcOspfv3NbrEntry 2 }
|
|
|
|
rcOspfv3NbrAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
ipv4(1),
|
|
ipv6(2),
|
|
ipv4z(3),
|
|
ipv6z(4),
|
|
dns(16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of rcOspfv3NbrAddress. Only IPv6
|
|
addresses without zone index are expected."
|
|
::= { rcOspfv3NbrEntry 3 }
|
|
|
|
rcOspfv3NbrAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the neighbor associated with
|
|
the local link."
|
|
::= { rcOspfv3NbrEntry 4 }
|
|
|
|
rcOspfv3NbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Bit Mask corresponding to the neighbor's op-
|
|
tions field."
|
|
REFERENCE
|
|
"OSPF Version 3, Appendix A.2 the Options field"
|
|
::= { rcOspfv3NbrEntry 5 }
|
|
|
|
rcOspfv3NbrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'FF'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this neighbor in the designat-
|
|
ed router election algorithm. The value 0 sig-
|
|
nifies that the neighbor is not eligible to be-
|
|
come the designated router on this particular
|
|
network."
|
|
::= { rcOspfv3NbrEntry 6 }
|
|
|
|
rcOspfv3NbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
attempt(2),
|
|
init(3),
|
|
twoWay(4),
|
|
exchangeStart(5),
|
|
exchange(6),
|
|
loading(7),
|
|
full(8),
|
|
restart(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The State of the relationship with this Neigh-
|
|
bor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10.1 Neighbor States"
|
|
::= { rcOspfv3NbrEntry 7 }
|
|
|
|
rcOspfv3NbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this neighbor relationship
|
|
has changed state, or an error has occurred."
|
|
::= { rcOspfv3NbrEntry 8 }
|
|
|
|
rcOspfv3NbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current length of the retransmission
|
|
queue."
|
|
::= { rcOspfv3NbrEntry 9 }
|
|
|
|
rcOspfv3NbrHelloSuppressed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Hellos are being suppressed
|
|
to the neighbor"
|
|
::= { rcOspfv3NbrEntry 10 }
|
|
|
|
rcOspfv3NbrIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface ID that the neighbor advertises
|
|
in its Hello Packets on this link, that is, the
|
|
neighbor's local interface index."
|
|
::= { rcOspfv3NbrEntry 11 }
|
|
|
|
rcOspfv3NbrRestartHelperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { notHelping (1),
|
|
helping (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the router is acting
|
|
as a hitless restart helper for the neighbor."
|
|
::= { rcOspfv3NbrEntry 12 }
|
|
|
|
rcOspfv3NbrRestartHelperAge OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1800)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remaining time in current OSPF hitless restart
|
|
interval, if the router is acting as a restart
|
|
helper for the neighbor."
|
|
::= { rcOspfv3NbrEntry 13 }
|
|
|
|
rcOspfv3NbrRestartHelperExitReason OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1), -- not attempted
|
|
inProgress (2), -- restart in
|
|
-- progress
|
|
completed (3), -- successfully
|
|
-- completed
|
|
timedOut (4), -- timed out
|
|
topologyChanged (5) -- aborted due to
|
|
-- topology
|
|
-- change.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the outcome of the last attempt at acting
|
|
as a hitless restart helper for the neighbor."
|
|
::= { rcOspfv3NbrEntry 14 }
|
|
|
|
rcOspfv3NbrDeadIntCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a Dead interval Count or TTL (time to live) field that
|
|
indicates how many seconds are left before the Neighbor is
|
|
declared down. The starting value is set to the Router Dead
|
|
Interval value and it decrements to 0 if there is no Hello
|
|
received for that neighbor (then the neighbor is declared down).
|
|
When a hello is received, the value is reset to the Router Dead
|
|
Interval value again."
|
|
::= { rcOspfv3NbrEntry 15 }
|
|
|
|
-- OSPFv3 NBMA Neighbor Table
|
|
|
|
-- The OSPFv3 NBMA Neighbor Table describes all configured
|
|
-- NBMA neighbors and neighbors dynamically discovered by
|
|
-- lower-level protocols such as Inverse Neighbor Discovery.
|
|
|
|
rcOspfv3NbmaNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3NbmaNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of configured non-virtual neighbor
|
|
information and neighbors dynamically discovered
|
|
by lower-level protocols such as Inverse Neighbor
|
|
Discovery."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
::= { rcOspfv3Objects 10 }
|
|
|
|
rcOspfv3NbmaNbrEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3NbmaNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single configured
|
|
neighbor or neighbor discovered by lower-level
|
|
protocols such as Inverse Neighbor Discovery."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10 The Neighbor Data
|
|
Structure"
|
|
INDEX { rcOspfv3NbmaNbrIfIndex,
|
|
rcOspfv3NbmaNbrAddress }
|
|
::= { rcOspfv3NbmaNbrTable 1 }
|
|
|
|
RcOspfv3NbmaNbrEntry ::= SEQUENCE {
|
|
rcOspfv3NbmaNbrIfIndex
|
|
InterfaceIndex,
|
|
rcOspfv3NbmaNbrAddress
|
|
Ipv6Address,
|
|
rcOspfv3NbmaNbrPriority
|
|
INTEGER,
|
|
rcOspfv3NbmaNbrRtrId
|
|
IpAddress,
|
|
rcOspfv3NbmaNbrState
|
|
INTEGER,
|
|
rcOspfv3NbmaNbrStorageType
|
|
StorageType,
|
|
rcOspfv3NbmaNbrStatus
|
|
RowStatus
|
|
}
|
|
|
|
rcOspfv3NbmaNbrIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local link ID of the link over which the
|
|
neighbor can be reached."
|
|
::= { rcOspfv3NbmaNbrEntry 1 }
|
|
|
|
rcOspfv3NbmaNbrAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the neighbor associated with
|
|
the local link."
|
|
::= { rcOspfv3NbmaNbrEntry 2 }
|
|
|
|
rcOspfv3NbmaNbrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'FF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of this neighbor in the designat-
|
|
ed router election algorithm. The value 0 sig-
|
|
nifies that the neighbor is not eligible to be-
|
|
come the designated router on this particular
|
|
network."
|
|
DEFVAL { 1 }
|
|
::= { rcOspfv3NbmaNbrEntry 3 }
|
|
|
|
rcOspfv3NbmaNbrRtrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer (represented as a type IpAd-
|
|
dress) uniquely identifying the neighboring
|
|
router in the Autonomous System. A value of
|
|
0.0.0.0 is returned until a Hello is received
|
|
from the configured neighbor."
|
|
::= { rcOspfv3NbmaNbrEntry 4 }
|
|
|
|
rcOspfv3NbmaNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
attempt(2),
|
|
init(3),
|
|
twoWay(4),
|
|
exchangeStart(5),
|
|
exchange(6),
|
|
loading(7),
|
|
full(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The State of the relationship with this Neigh-
|
|
bor."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 10.1 Neighbor States"
|
|
::= { rcOspfv3NbmaNbrEntry 5 }
|
|
|
|
rcOspfv3NbmaNbrStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Conceptual rows having the value 'permanent' need not
|
|
allow write-access to any columnar objects in the row.
|
|
Manually configured entries will have a storage type
|
|
of nonVolatile while entries dynamically created as a
|
|
result of a lower-level protocol such as Inverse
|
|
Neighbor Discovery will have a storage type of
|
|
volatile."
|
|
DEFVAL { nonVolatile }
|
|
::= { rcOspfv3NbmaNbrEntry 6 }
|
|
|
|
rcOspfv3NbmaNbrStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable controls the status of the en-
|
|
try. The use of RowStatus is covered in more detail
|
|
in [6]."
|
|
::= { rcOspfv3NbmaNbrEntry 7 }
|
|
|
|
-- OSPFv3 Virtual Neighbor Table
|
|
|
|
-- This table describes all virtual neighbors.
|
|
-- Since Virtual Links are configured in the
|
|
-- virtual interface table, this table is read-only.
|
|
|
|
rcOspfv3VirtNbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3VirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of virtual neighbor information."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 15 Virtual Links"
|
|
::= { rcOspfv3Objects 11 }
|
|
|
|
rcOspfv3VirtNbrEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3VirtNbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual neighbor information."
|
|
INDEX { rcOspfv3VirtNbrArea,
|
|
rcOspfv3VirtNbrRtrId }
|
|
::= { rcOspfv3VirtNbrTable 1 }
|
|
|
|
RcOspfv3VirtNbrEntry ::= SEQUENCE {
|
|
rcOspfv3VirtNbrArea
|
|
IpAddress,
|
|
rcOspfv3VirtNbrRtrId
|
|
IpAddress,
|
|
rcOspfv3VirtNbrIfIndex
|
|
Integer32,
|
|
rcOspfv3VirtNbrAddressType
|
|
INTEGER,
|
|
rcOspfv3VirtNbrAddress
|
|
OCTET STRING,
|
|
rcOspfv3VirtNbrOptions
|
|
Integer32,
|
|
rcOspfv3VirtNbrState
|
|
INTEGER,
|
|
rcOspfv3VirtNbrEvents
|
|
Counter32,
|
|
rcOspfv3VirtNbrLsRetransQLen
|
|
Gauge32,
|
|
rcOspfv3VirtNbrHelloSuppressed
|
|
TruthValue,
|
|
rcOspfv3VirtNbrIfId
|
|
Integer32,
|
|
rcOspfv3VirtNbrRestartHelperStatus
|
|
INTEGER,
|
|
rcOspfv3VirtNbrRestartHelperAge
|
|
Integer32,
|
|
rcOspfv3VirtNbrRestartHelperExitReason
|
|
INTEGER
|
|
}
|
|
|
|
rcOspfv3VirtNbrArea OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area Identifier."
|
|
::= { rcOspfv3VirtNbrEntry 1 }
|
|
|
|
rcOspfv3VirtNbrRtrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
neighboring router in the Autonomous System."
|
|
::= { rcOspfv3VirtNbrEntry 2 }
|
|
|
|
rcOspfv3VirtNbrIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local interface ID for the virtual link over
|
|
which the neighbor can be reached."
|
|
::= { rcOspfv3VirtNbrEntry 3 }
|
|
|
|
rcOspfv3VirtNbrAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
ipv4(1),
|
|
ipv6(2),
|
|
ipv4z(3),
|
|
ipv6z(4),
|
|
dns(16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of rcOspfv3VirtNbrAddress. Only IPv6
|
|
addresses without zone index are expected."
|
|
::= { rcOspfv3VirtNbrEntry 4 }
|
|
|
|
rcOspfv3VirtNbrAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address advertised by this Virtual Neighbor.
|
|
It must be a Site-Local or Global scope address."
|
|
::= { rcOspfv3VirtNbrEntry 5 }
|
|
|
|
rcOspfv3VirtNbrOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Bit Mask corresponding to the neighbor's op-
|
|
tions field."
|
|
REFERENCE
|
|
"OSPF Version 3, Appendix A.2 the Options field"
|
|
::= { rcOspfv3VirtNbrEntry 6 }
|
|
|
|
rcOspfv3VirtNbrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
attempt(2),
|
|
init(3),
|
|
twoWay(4),
|
|
exchangeStart(5),
|
|
exchange(6),
|
|
loading(7),
|
|
full(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the Virtual Neighbor Relation-
|
|
ship."
|
|
::= { rcOspfv3VirtNbrEntry 7 }
|
|
|
|
rcOspfv3VirtNbrEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this virtual link has
|
|
changed its state, or an error has occurred."
|
|
::= { rcOspfv3VirtNbrEntry 8 }
|
|
|
|
rcOspfv3VirtNbrLsRetransQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current length of the retransmission
|
|
queue."
|
|
::= { rcOspfv3VirtNbrEntry 9 }
|
|
|
|
rcOspfv3VirtNbrHelloSuppressed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Hellos are being suppressed
|
|
to the neighbor"
|
|
::= { rcOspfv3VirtNbrEntry 10 }
|
|
|
|
rcOspfv3VirtNbrIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface ID that the neighbor advertises
|
|
in its Hello Packets on this virtual link, that is,
|
|
the neighbor's local interface ID."
|
|
::= { rcOspfv3VirtNbrEntry 11 }
|
|
|
|
rcOspfv3VirtNbrRestartHelperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { notHelping (1),
|
|
helping (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the router is acting
|
|
as a hitless restart helper for the neighbor."
|
|
::= { rcOspfv3VirtNbrEntry 12 }
|
|
|
|
rcOspfv3VirtNbrRestartHelperAge OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1800)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remaining time in current OSPF hitless restart
|
|
interval, if the router is acting as a restart
|
|
helper for the neighbor."
|
|
::= { rcOspfv3VirtNbrEntry 13 }
|
|
|
|
rcOspfv3VirtNbrRestartHelperExitReason OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1), -- not attempted
|
|
inProgress (2), -- restart in
|
|
-- progress
|
|
completed (3), -- successfully
|
|
-- completed
|
|
timedOut (4), -- timed out
|
|
topologyChanged (5) -- aborted due to
|
|
-- topology
|
|
-- change.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the outcome of the last attempt at acting
|
|
as a hitless restart helper for the neighbor."
|
|
::= { rcOspfv3VirtNbrEntry 14 }
|
|
|
|
|
|
--
|
|
-- The OSPFv3 Area Aggregate Table
|
|
--
|
|
|
|
rcOspfv3AreaAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcOspfv3AreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A range of IPv6 prefixes specified by a
|
|
prefix/prefix length pair. Note that if
|
|
ranges are configured such that one range sub-
|
|
sumes another range the most specific match is
|
|
the preferred one."
|
|
::= { rcOspfv3Objects 12 }
|
|
|
|
rcOspfv3AreaAggregateEntry OBJECT-TYPE
|
|
SYNTAX RcOspfv3AreaAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A range of IPv6 prefixes specified by a
|
|
prefix/prefix length pair. Note that if
|
|
ranges are configured such that one range sub-
|
|
sumes another range the most specific match is
|
|
the preferred one."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
INDEX { rcOspfv3AreaAggregateAreaID,
|
|
rcOspfv3AreaAggregateAreaLsdbType,
|
|
rcOspfv3AreaAggregatePrefix,
|
|
rcOspfv3AreaAggregatePrefixLength }
|
|
::= { rcOspfv3AreaAggregateTable 1 }
|
|
|
|
RcOspfv3AreaAggregateEntry ::= SEQUENCE {
|
|
rcOspfv3AreaAggregateAreaID
|
|
IpAddress,
|
|
rcOspfv3AreaAggregateAreaLsdbType
|
|
INTEGER,
|
|
rcOspfv3AreaAggregatePrefix
|
|
Ipv6Address,
|
|
rcOspfv3AreaAggregatePrefixLength
|
|
Unsigned32,
|
|
rcOspfv3AreaAggregateStatus
|
|
RowStatus,
|
|
rcOspfv3AreaAggregateEffect
|
|
INTEGER,
|
|
rcOspfv3AreaAggregateRouteTag
|
|
Integer32,
|
|
rcOspfv3AreaAggregateAdvertiseMetric
|
|
INTEGER
|
|
}
|
|
|
|
rcOspfv3AreaAggregateAreaID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Area the Address Aggregate is to be found
|
|
within."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcOspfv3AreaAggregateEntry 1 }
|
|
|
|
rcOspfv3AreaAggregateAreaLsdbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
interAreaPrefixLsa(8195), -- 0x2003
|
|
nssaExternalLsa(8199) -- 0x2007
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the Address Aggregate. This field
|
|
specifies the Area Lsdb type that this Address Ag-
|
|
gregate applies to."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix A.4.1 The Link State
|
|
Advertisement header"
|
|
::= { rcOspfv3AreaAggregateEntry 2 }
|
|
|
|
rcOspfv3AreaAggregatePrefix OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 Prefix."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcOspfv3AreaAggregateEntry 3 }
|
|
|
|
rcOspfv3AreaAggregatePrefixLength OBJECT-TYPE
|
|
SYNTAX Unsigned32 (3..128)
|
|
UNITS "bits"
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the prefix (in bits). A prefix can
|
|
not be shorter than 3 bits."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rcOspfv3AreaAggregateEntry 4 }
|
|
|
|
rcOspfv3AreaAggregateStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable controls the status of the en-
|
|
try. The use of RowStatus is covered in more detail
|
|
in [6]."
|
|
::= { rcOspfv3AreaAggregateEntry 5 }
|
|
|
|
rcOspfv3AreaAggregateEffect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
advertiseMatching(1),
|
|
doNotAdvertiseMatching(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Prefixes subsumed by ranges either trigger the
|
|
advertisement of the indicated aggregate (ad-
|
|
vertiseMatching), or result in the prefix not
|
|
being advertised at all outside the area."
|
|
DEFVAL { advertiseMatching }
|
|
::= { rcOspfv3AreaAggregateEntry 6 }
|
|
|
|
rcOspfv3AreaAggregateRouteTag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This tag is advertised only in the summarized
|
|
As-External LSA when summarizing from type-7 to
|
|
type-5."
|
|
DEFVAL { 0 }
|
|
::= { rcOspfv3AreaAggregateEntry 7 }
|
|
|
|
rcOspfv3AreaAggregateAdvertiseMetric OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to specify a metric for a Summary LSA (type 3)
|
|
generated by OSPF through an area range.
|
|
If this metric is set to 0, OSPF uses the cost
|
|
to the farthest point in the networks being
|
|
summarized as the metric."
|
|
::= { rcOspfv3AreaAggregateEntry 8 }
|
|
|
|
-- Ospfv3 Stats group
|
|
|
|
rcOspfv3Stats OBJECT IDENTIFIER ::= { rcOspfv3Objects 13 }
|
|
|
|
rcOspfv3StatsTxPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
transmitted by OSPF."
|
|
::= { rcOspfv3Stats 1 }
|
|
|
|
rcOspfv3StatsRxPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
received by OSPF."
|
|
::= { rcOspfv3Stats 2 }
|
|
|
|
rcOspfv3StatsTxDropPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
dropped before transmitted by OSPF."
|
|
::= { rcOspfv3Stats 3 }
|
|
|
|
|
|
rcOspfv3StatsRxDropPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
dropped before received by OSPF."
|
|
::= { rcOspfv3Stats 4 }
|
|
|
|
rcOspfv3StatsRxBadPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of packets
|
|
received by OSPF that are bad."
|
|
::= { rcOspfv3Stats 5 }
|
|
|
|
rcOspfv3StatsSpfRuns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the total number of SPF
|
|
calculations performed by OSPF, which
|
|
also includes the number of partial route
|
|
table calculation for Incremental Updates."
|
|
::= { rcOspfv3Stats 6 }
|
|
|
|
rcOspfv3StatsLastSpfRun OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the time(SysUpTime) since
|
|
the last spf calculated by OSPF."
|
|
::= { rcOspfv3Stats 7 }
|
|
|
|
rcOspfv3StatsLsdbTblSize OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in
|
|
the linkstate database table."
|
|
::= { rcOspfv3Stats 8 }
|
|
|
|
rcOspfv3StatsBadLsReqs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of bad ls requests."
|
|
::= { rcOspfv3Stats 9 }
|
|
|
|
rcOspfv3StatsSeqMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of sequence
|
|
mismatched packets."
|
|
::= { rcOspfv3Stats 10 }
|
|
|
|
rcOspfv3StatsRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of OSPF routes
|
|
added to RTM."
|
|
::= { rcOspfv3Stats 11 }
|
|
|
|
rcOspfv3StatsAdjacencies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of adjacencies
|
|
existing."
|
|
::= { rcOspfv3Stats 12 }
|
|
|
|
rcOspfv3StatsAreas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of areas configured"
|
|
::= { rcOspfv3Stats 13 }
|
|
|
|
rcOspfv3StatsNbrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of ospf neighbors"
|
|
::= { rcOspfv3Stats 14 }
|
|
|
|
rcOspfv3StatsReset OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "reset Ospfv3 global stats"
|
|
DEFVAL { false }
|
|
::= { rcOspfv3Stats 15 }
|
|
|
|
-- conformance information
|
|
|
|
rcOspfv3Groups OBJECT IDENTIFIER ::= { rcOspfv3Conformance 1 }
|
|
rcOspfv3Compliances OBJECT IDENTIFIER ::= { rcOspfv3Conformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
rcOspfv3Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement "
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
rcOspfv3BasicGroup,
|
|
rcOspfv3AreaGroup,
|
|
rcOspfv3IfGroup,
|
|
rcOspfv3VirtIfGroup,
|
|
rcOspfv3NbrGroup,
|
|
rcOspfv3NbmaNbrGroup,
|
|
rcOspfv3VirtNbrGroup,
|
|
rcOspfv3AreaAggregateGroup
|
|
}
|
|
|
|
GROUP rcOspfv3AsLsdbGroup
|
|
DESCRIPTION
|
|
"This group is required for OSPFv3 systems that
|
|
display their AS-scope link state database."
|
|
|
|
GROUP rcOspfv3AreaLsdbGroup
|
|
DESCRIPTION
|
|
"This group is required for OSPFv3 systems that
|
|
display their Area-scope link state database."
|
|
|
|
GROUP rcOspfv3LinkLsdbGroup
|
|
DESCRIPTION
|
|
"This group is required for OSPFv3 systems that
|
|
display their Link-scope link state database."
|
|
|
|
GROUP rcOspfv3HostGroup
|
|
DESCRIPTION
|
|
"This group is required for OSPFv3 systems that
|
|
support attached hosts."
|
|
|
|
-- OBJECT rcOspfv3NbrAddressType
|
|
-- SYNTAX InetAddressType { ipv6(2) }
|
|
-- DESCRIPTION
|
|
-- "An implementation is only required to support IPv6
|
|
-- address without zone index."
|
|
|
|
-- OBJECT rcOspfv3VirtNbrAddressType
|
|
-- SYNTAX InetAddressType { ipv6(2) }
|
|
-- DESCRIPTION
|
|
-- "An implementation is only required to support IPv6
|
|
-- address without zone index."
|
|
|
|
::= { rcOspfv3Compliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
rcOspfv3BasicGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3RouterId,
|
|
rcOspfv3AdminStat,
|
|
rcOspfv3VersionNumber,
|
|
rcOspfv3AreaBdrRtrStatus,
|
|
rcOspfv3ASBdrRtrStatus,
|
|
rcOspfv3AsScopeLsaCount,
|
|
rcOspfv3AsScopeLsaCksumSum,
|
|
rcOspfv3OriginateNewLsas,
|
|
rcOspfv3RxNewLsas,
|
|
rcOspfv3ExtLsaCount,
|
|
rcOspfv3ExtAreaLsdbLimit,
|
|
rcOspfv3MulticastExtensions, -- obsolete
|
|
rcOspfv3ExitOverflowInterval,
|
|
rcOspfv3DemandExtensions,
|
|
rcOspfv3TrafficEngineeringSupport,
|
|
rcOspfv3ReferenceBandwidth,
|
|
rcOspfv3RestartSupport,
|
|
rcOspfv3RestartInterval,
|
|
rcOspfv3RestartStatus,
|
|
rcOspfv3RestartAge,
|
|
rcOspfv3RestartExitReason,
|
|
rcOspfv3HelperModeDisable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required for OSPFv3 systems."
|
|
::= { rcOspfv3Groups 1 }
|
|
|
|
|
|
rcOspfv3AreaGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3ImportAsExtern,
|
|
rcOspfv3AreaSpfRuns,
|
|
rcOspfv3AreaBdrRtrCount,
|
|
rcOspfv3AreaAsBdrRtrCount,
|
|
rcOspfv3AreaScopeLsaCount,
|
|
rcOspfv3AreaScopeLsaCksumSum,
|
|
rcOspfv3AreaSummary,
|
|
rcOspfv3AreaStatus,
|
|
rcOspfv3StubMetric,
|
|
rcOspfv3AreaNssaTranslatorRole,
|
|
rcOspfv3AreaNssaTranslatorState,
|
|
rcOspfv3AreaNssaTranslatorStabilityInterval,
|
|
rcOspfv3AreaNssaTranslatorEvents,
|
|
rcOspfv3AreaStubMetricType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required for OSPFv3 systems
|
|
supporting areas."
|
|
::= { rcOspfv3Groups 2 }
|
|
|
|
rcOspfv3AsLsdbGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3AsLsdbSequence,
|
|
rcOspfv3AsLsdbAge,
|
|
rcOspfv3AsLsdbChecksum,
|
|
rcOspfv3AsLsdbAdvertisement,
|
|
rcOspfv3AsLsdbTypeKnown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required for OSPFv3 systems
|
|
that display their AS-scope link state database."
|
|
::= { rcOspfv3Groups 3 }
|
|
|
|
rcOspfv3AreaLsdbGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3AreaLsdbSequence,
|
|
rcOspfv3AreaLsdbAge,
|
|
rcOspfv3AreaLsdbChecksum,
|
|
rcOspfv3AreaLsdbAdvertisement,
|
|
rcOspfv3AreaLsdbTypeKnown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required for OSPFv3 systems
|
|
that display their Area-scope link state database."
|
|
::= { rcOspfv3Groups 4 }
|
|
|
|
rcOspfv3LinkLsdbGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3LinkLsdbSequence,
|
|
rcOspfv3LinkLsdbAge,
|
|
rcOspfv3LinkLsdbChecksum,
|
|
rcOspfv3LinkLsdbAdvertisement,
|
|
rcOspfv3LinkLsdbTypeKnown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required for OSPFv3 systems
|
|
that display their Link-scope link state database."
|
|
::= { rcOspfv3Groups 5 }
|
|
|
|
rcOspfv3HostGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3HostMetric,
|
|
rcOspfv3HostStatus,
|
|
rcOspfv3HostAreaID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required for OSPFv3 systems
|
|
that support attached hosts."
|
|
::= { rcOspfv3Groups 6 }
|
|
|
|
rcOspfv3IfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3IfAreaId,
|
|
rcOspfv3IfType,
|
|
rcOspfv3IfAdminStat,
|
|
rcOspfv3IfRtrPriority,
|
|
rcOspfv3IfTransitDelay,
|
|
rcOspfv3IfRetransInterval,
|
|
rcOspfv3IfHelloInterval,
|
|
rcOspfv3IfRtrDeadInterval,
|
|
rcOspfv3IfPollInterval,
|
|
rcOspfv3IfState,
|
|
rcOspfv3IfDesignatedRouter,
|
|
rcOspfv3IfBackupDesignatedRouter,
|
|
rcOspfv3IfEvents,
|
|
rcOspfv3IfStatus,
|
|
rcOspfv3IfMulticastForwarding,
|
|
rcOspfv3IfDemand,
|
|
rcOspfv3IfMetricValue,
|
|
rcOspfv3IfLinkScopeLsaCount,
|
|
rcOspfv3IfLinkLsaCksumSum,
|
|
rcOspfv3IfInstId,
|
|
rcOspfv3IfDemandNbrProbe,
|
|
rcOspfv3IfDemandNbrProbeRetxLimit,
|
|
rcOspfv3IfDemandNbrProbeInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These interface objects are required for
|
|
OSPFv3 systems."
|
|
::= { rcOspfv3Groups 7 }
|
|
|
|
rcOspfv3VirtIfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3VirtIfIndex,
|
|
rcOspfv3VirtIfTransitDelay,
|
|
rcOspfv3VirtIfRetransInterval,
|
|
rcOspfv3VirtIfHelloInterval,
|
|
rcOspfv3VirtIfRtrDeadInterval,
|
|
rcOspfv3VirtIfState,
|
|
rcOspfv3VirtIfEvents,
|
|
rcOspfv3VirtIfStatus,
|
|
rcOspfv3VirtIfLinkScopeLsaCount,
|
|
rcOspfv3VirtIfLinkLsaCksumSum
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These virtual interface objects are required for
|
|
OSPFv3 systems."
|
|
::= { rcOspfv3Groups 8 }
|
|
|
|
rcOspfv3NbrGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3NbrAddressType,
|
|
rcOspfv3NbrAddress,
|
|
rcOspfv3NbrOptions,
|
|
rcOspfv3NbrPriority,
|
|
rcOspfv3NbrState,
|
|
rcOspfv3NbrEvents,
|
|
rcOspfv3NbrLsRetransQLen,
|
|
rcOspfv3NbrHelloSuppressed,
|
|
rcOspfv3NbrIfId,
|
|
rcOspfv3NbrRestartHelperStatus,
|
|
rcOspfv3NbrRestartHelperAge,
|
|
rcOspfv3NbrRestartHelperExitReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These neighbor objects are required for
|
|
OSPFv3 systems."
|
|
::= { rcOspfv3Groups 9 }
|
|
|
|
rcOspfv3NbmaNbrGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3NbmaNbrPriority,
|
|
rcOspfv3NbmaNbrRtrId,
|
|
rcOspfv3NbmaNbrState,
|
|
rcOspfv3NbmaNbrStorageType,
|
|
rcOspfv3NbmaNbrStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These NBMA neighbor objects are required for
|
|
OSPFv3 systems."
|
|
::= { rcOspfv3Groups 10 }
|
|
|
|
rcOspfv3VirtNbrGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3VirtNbrIfIndex,
|
|
rcOspfv3VirtNbrAddressType,
|
|
rcOspfv3VirtNbrAddress,
|
|
rcOspfv3VirtNbrOptions,
|
|
rcOspfv3VirtNbrState,
|
|
rcOspfv3VirtNbrEvents,
|
|
rcOspfv3VirtNbrLsRetransQLen,
|
|
rcOspfv3VirtNbrHelloSuppressed,
|
|
rcOspfv3VirtNbrIfId,
|
|
rcOspfv3VirtNbrRestartHelperStatus,
|
|
rcOspfv3VirtNbrRestartHelperAge,
|
|
rcOspfv3VirtNbrRestartHelperExitReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These virtual neighbor objects are required for
|
|
OSPFv3 systems."
|
|
::= { rcOspfv3Groups 11 }
|
|
|
|
rcOspfv3AreaAggregateGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rcOspfv3AreaAggregateStatus,
|
|
rcOspfv3AreaAggregateEffect,
|
|
rcOspfv3AreaAggregateRouteTag,
|
|
rcOspfv3AreaAggregateAdvertiseMetric
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These area aggregate objects are required for
|
|
OSPFv3 systems."
|
|
::= { rcOspfv3Groups 12 }
|
|
|
|
|
|
-- END of OSPF v3 MIB
|
|
|
|
--BEGIN OF DHCP RELAY FOR IPV6
|
|
|
|
rcIpv6ConfDhcpRelayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6ConfDhcpRelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DHCP Relay for Ipv6 configuration table"
|
|
::= { rcIpv6Objects 9 }
|
|
|
|
rcIpv6ConfDhcpRelayEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6ConfDhcpRelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to configure DHCP on a particular L3 interface. An
|
|
entry is created automatically when the variable
|
|
rcIpv6InterfaceDhcpEnabled is set to TRUE.
|
|
Once created this entry will only be deleted if the
|
|
rcIpv6ConfDhcpRowStatus is set to 'destroy(6)'. In
|
|
which case, the rcIpv6InterfaceDhcpEnabled is automatically
|
|
reset to the FALSE setting."
|
|
INDEX { rcIpv6ConfDhcpIfIndex }
|
|
::= { rcIpv6ConfDhcpRelayTable 1 }
|
|
|
|
RcIpv6ConfDhcpRelayEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6ConfDhcpIfIndex InterfaceIndex,
|
|
rcIpv6ConfDhcpMaxHop Unsigned32,
|
|
rcIpv6ConfDhcpRemoteIdEnabled TruthValue,
|
|
rcIpv6ConfDhcpNumRequests Counter32,
|
|
rcIpv6ConfDhcpNumReplies Counter32,
|
|
rcIpv6ConfDhcpRowStatus RowStatus
|
|
}
|
|
|
|
rcIpv6ConfDhcpIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex(1..6142)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface number. The number can represent either
|
|
a physical or logical(VLAN) interface."
|
|
::= { rcIpv6ConfDhcpRelayEntry 1 }
|
|
|
|
rcIpv6ConfDhcpMaxHop OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the maximum number of hops a
|
|
DHCP packet can take from the source device to
|
|
the destination device (i.e., DHCP client to
|
|
DHCP server)."
|
|
DEFVAL { 32 }
|
|
::= { rcIpv6ConfDhcpRelayEntry 2 }
|
|
|
|
rcIpv6ConfDhcpRemoteIdEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate if remote-id option is enabled."
|
|
DEFVAL { false }
|
|
::= { rcIpv6ConfDhcpRelayEntry 3 }
|
|
|
|
rcIpv6ConfDhcpNumRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of DHCP requests seen on this interface."
|
|
::= { rcIpv6ConfDhcpRelayEntry 4 }
|
|
|
|
rcIpv6ConfDhcpNumReplies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of DHCP replies seen on this interface."
|
|
::= { rcIpv6ConfDhcpRelayEntry 5 }
|
|
|
|
rcIpv6ConfDhcpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An entry is created automatically when the variable
|
|
rcIpv6InterfaceDhcpEnabled is set to TRUE.
|
|
Once created this entry will only be deleted if the
|
|
rcIpv6ConfDhcpRowStatus is set to 'destroy(6)'. In
|
|
which case, the rcIpv6InterfaceDhcpEnabled is automatically
|
|
reset to the FALSE setting."
|
|
::= { rcIpv6ConfDhcpRelayEntry 6 }
|
|
|
|
|
|
|
|
rcIpv6DhcpForwardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6DhcpForwardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DHCP Relay forwarding table."
|
|
::= { rcIpv6Objects 10 }
|
|
|
|
rcIpv6DhcpForwardEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6DhcpForwardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry used represents a DHCP Relayed message forwarding directive."
|
|
INDEX { rcIpv6DhcpForwardAgentAddr, rcIpv6DhcpForwardServerAddr }
|
|
::= { rcIpv6DhcpForwardTable 1 }
|
|
|
|
RcIpv6DhcpForwardEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6DhcpForwardAgentAddr Ipv6Address,
|
|
rcIpv6DhcpForwardServerAddr Ipv6Address,
|
|
rcIpv6DhcpForwardEnabled TruthValue,
|
|
rcIpv6DhcpForwardRowStatus RowStatus
|
|
}
|
|
|
|
rcIpv6DhcpForwardAgentAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP address configured on an interface
|
|
(i.e., a locally configured IP address)."
|
|
::= { rcIpv6DhcpForwardEntry 1 }
|
|
|
|
rcIpv6DhcpForwardServerAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the DHCP server. If this
|
|
IP address corresponds to a local interface address, the DHCP packet is multicast out
|
|
the interface the IP address is assigned to.otherwise,the DHCP packet is sent via unicast to the remote device."
|
|
::= { rcIpv6DhcpForwardEntry 2 }
|
|
|
|
rcIpv6DhcpForwardEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether the entry should be used."
|
|
DEFVAL { true }
|
|
::= { rcIpv6DhcpForwardEntry 3 }
|
|
|
|
rcIpv6DhcpForwardRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcIpv6DhcpForwardEntry 4 }
|
|
|
|
--END OF DHCP RELAY FOR IPV6
|
|
|
|
-- IPv6 Radius Serv Table
|
|
|
|
rcIpv6RadiusServTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RadiusServEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The RADIUS table (0 to 10 entries). This
|
|
table lists the information of the RADIUS server."
|
|
::= { rcIpv6Objects 11}
|
|
|
|
rcIpv6RadiusServEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RadiusServEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A RADIUS server table entry."
|
|
INDEX { rcIpv6RadiusServAddress,
|
|
rcIpv6RadiusServUsedBy }
|
|
::= { rcIpv6RadiusServTable 1 }
|
|
|
|
RcIpv6RadiusServEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RadiusServAddress Ipv6Address,
|
|
rcIpv6RadiusServUsedBy INTEGER,
|
|
rcIpv6RadiusServPriority Unsigned32,
|
|
rcIpv6RadiusServTimeOut Unsigned32,
|
|
rcIpv6RadiusServEnable TruthValue,
|
|
rcIpv6RadiusServMaxRetries Unsigned32,
|
|
rcIpv6RadiusServUdpPort Unsigned32,
|
|
rcIpv6RadiusServSecretKey SnmpAdminString,
|
|
rcIpv6RadiusServAccessRequests Counter32,
|
|
rcIpv6RadiusServAccessAccepts Counter32,
|
|
rcIpv6RadiusServAccessRejects Counter32,
|
|
rcIpv6RadiusServBadResponses Counter32,
|
|
rcIpv6RadiusServPendingRequests Counter32,
|
|
rcIpv6RadiusServClientRetries Counter32,
|
|
rcIpv6RadiusServAcctEnable TruthValue,
|
|
rcIpv6RadiusServAcctUdpPort Unsigned32,
|
|
rcIpv6RadiusServAcctOnRequests Counter32,
|
|
rcIpv6RadiusServAcctOffRequests Counter32,
|
|
rcIpv6RadiusServAcctStartRequests Counter32,
|
|
rcIpv6RadiusServAcctStopRequests Counter32,
|
|
rcIpv6RadiusServAcctInterimRequests Counter32,
|
|
rcIpv6RadiusServAcctBadResponses Counter32,
|
|
rcIpv6RadiusServAcctPendingRequests Counter32,
|
|
rcIpv6RadiusServAcctClientRetries Counter32,
|
|
rcIpv6RadiusServNasIpAddress Ipv6Address,
|
|
rcIpv6RadiusServRoundTripTime SnmpAdminString,
|
|
rcIpv6RadiusServAccessChallanges Counter32,
|
|
rcIpv6RadiusServSourceIpAddr Ipv6Address,
|
|
rcIpv6RadiusServRowStatus RowStatus
|
|
}
|
|
|
|
rcIpv6RadiusServAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Server IP address of the RADIUS authentication server
|
|
referred to in this table entry."
|
|
::= { rcIpv6RadiusServEntry 1 }
|
|
|
|
rcIpv6RadiusServUsedBy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cli(1),
|
|
igap(2),
|
|
snmp(3),
|
|
eap(4),
|
|
web(5)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "cli(1): for cli login, igap(2): for igap,snmp(3):
|
|
for snmp login, eap(4) for EAP PAE Authenticator,web(5) for EDM."
|
|
::= { rcIpv6RadiusServEntry 2 }
|
|
|
|
rcIpv6RadiusServPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Server priority, used to control which server to choose
|
|
first to send authentication."
|
|
DEFVAL { 10 }
|
|
::= { rcIpv6RadiusServEntry 3 }
|
|
|
|
rcIpv6RadiusServTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..20)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The time interval in seconds before the client
|
|
retransmit the packet."
|
|
DEFVAL { 3 }
|
|
::= { rcIpv6RadiusServEntry 4 }
|
|
|
|
rcIpv6RadiusServEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable this server."
|
|
DEFVAL { true }
|
|
::= { rcIpv6RadiusServEntry 5 }
|
|
|
|
rcIpv6RadiusServMaxRetries OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..6)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of retransmissions."
|
|
DEFVAL { 1 }
|
|
::= { rcIpv6RadiusServEntry 6 }
|
|
|
|
rcIpv6RadiusServUdpPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65536)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The UDP port the client is using to send requests
|
|
to this server."
|
|
DEFVAL { 1812 }
|
|
::= { rcIpv6RadiusServEntry 7 }
|
|
|
|
rcIpv6RadiusServSecretKey OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The identifier of the RADIUS authentication client."
|
|
::= { rcIpv6RadiusServEntry 8 }
|
|
|
|
rcIpv6RadiusServAccessRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-response packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcIpv6RadiusServEntry 9 }
|
|
|
|
rcIpv6RadiusServAccessAccepts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-accept packets (valid or
|
|
invalid) received from this server."
|
|
::= { rcIpv6RadiusServEntry 10 }
|
|
|
|
rcIpv6RadiusServAccessRejects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-reject packets (valid or
|
|
invalid) received from this server."
|
|
::= { rcIpv6RadiusServEntry 11 }
|
|
|
|
rcIpv6RadiusServBadResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS invalid access-response packets
|
|
received from this server."
|
|
::= { rcIpv6RadiusServEntry 12 }
|
|
|
|
rcIpv6RadiusServPendingRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-request packets destined
|
|
for this server that have not yet timed out or
|
|
received a response. This variable is incremented
|
|
when an access-request is sent and decremented due
|
|
to receipt of an access-accept, access-reject, a
|
|
timeout or retransmission."
|
|
::= { rcIpv6RadiusServEntry 13 }
|
|
|
|
rcIpv6RadiusServClientRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of authentication retransmission to
|
|
this server."
|
|
::= { rcIpv6RadiusServEntry 14}
|
|
|
|
rcIpv6RadiusServAcctEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Radius Accounting on this server."
|
|
DEFVAL { true }
|
|
::= { rcIpv6RadiusServEntry 15 }
|
|
|
|
rcIpv6RadiusServAcctUdpPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65536)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The UDP port the client used to send accounting
|
|
requests to this server."
|
|
DEFVAL { 1813 }
|
|
::= { rcIpv6RadiusServEntry 16 }
|
|
|
|
rcIpv6RadiusServAcctOnRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-on packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcIpv6RadiusServEntry 17 }
|
|
|
|
rcIpv6RadiusServAcctOffRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-off packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcIpv6RadiusServEntry 18 }
|
|
|
|
rcIpv6RadiusServAcctStartRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-start packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcIpv6RadiusServEntry 19 }
|
|
|
|
rcIpv6RadiusServAcctStopRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-stop packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcIpv6RadiusServEntry 20 }
|
|
|
|
rcIpv6RadiusServAcctInterimRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-interim packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcIpv6RadiusServEntry 21 }
|
|
|
|
rcIpv6RadiusServAcctBadResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Invalid responses received from this
|
|
server."
|
|
::= { rcIpv6RadiusServEntry 22 }
|
|
|
|
rcIpv6RadiusServAcctPendingRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting packets that are waiting
|
|
be sent to this server. This variable is incremented
|
|
whenever any accounting-request is sent to this server and
|
|
decremented when an acknowledgement is received or timeout
|
|
occurs."
|
|
::= { rcIpv6RadiusServEntry 23 }
|
|
|
|
rcIpv6RadiusServAcctClientRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting packets retransmitted
|
|
to this server."
|
|
::= { rcIpv6RadiusServEntry 24 }
|
|
|
|
rcIpv6RadiusServNasIpAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RADIUS Client NAS Identifier for this server."
|
|
::= { rcIpv6RadiusServEntry 25 }
|
|
|
|
rcIpv6RadiusServRoundTripTime OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time different between the instance when
|
|
a RADIUS request is sent and the
|
|
corresponding response is received."
|
|
::= { rcIpv6RadiusServEntry 26 }
|
|
|
|
rcIpv6RadiusServAccessChallanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-challanges packets
|
|
sent to this server. This does not include
|
|
retransmission."
|
|
::= { rcIpv6RadiusServEntry 27 }
|
|
|
|
rcIpv6RadiusServSourceIpAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "source IP address RADIUS packets."
|
|
::= { rcIpv6RadiusServEntry 28 }
|
|
|
|
rcIpv6RadiusServRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcIpv6RadiusServEntry 29 }
|
|
|
|
-- BEGIN OF IPV6 DESTINATION CACHE SECTION
|
|
|
|
rcIpv6DestinationCacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6DestinationCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 Destination Cache table"
|
|
::= { rcIpv6Objects 13 }
|
|
|
|
rcIpv6DestinationCacheEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6DestinationCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to display Destination Cache"
|
|
INDEX { rcIpv6DCacheDestAddr, rcIpv6DCacheIfIndex }
|
|
::= { rcIpv6DestinationCacheTable 1 }
|
|
|
|
RcIpv6DestinationCacheEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6DCacheDestAddr Ipv6Address,
|
|
rcIpv6DCacheIfIndex Unsigned32,
|
|
rcIpv6DCacheNextHop Ipv6Address,
|
|
rcIpv6DCacheIfType INTEGER,
|
|
rcIpv6DCacheIfData DisplayString,
|
|
rcIpv6DCachePmtu Integer32,
|
|
rcIpv6DCachePmtuAge Counter32
|
|
}
|
|
|
|
rcIpv6DCacheDestAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 Destination Address from the
|
|
Destination Cache."
|
|
::= { rcIpv6DestinationCacheEntry 1 }
|
|
|
|
rcIpv6DCacheIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The last 16 bits of this object's value are interpreted as InterfaceIndex
|
|
(it can represent either a physical, or a VLAN, or a tunnel interface);
|
|
the first 16 bits are ignored when the object's value is interpreted."
|
|
::= { rcIpv6DestinationCacheEntry 2 }
|
|
|
|
rcIpv6DCacheNextHop OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 Next Hop for a Destination Cache entry."
|
|
::= { rcIpv6DestinationCacheEntry 3 }
|
|
|
|
rcIpv6DCacheIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {real(1), virtual(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Interface type; it can be a real (i.e. VLAN, brouter, tunnel)
|
|
or a virtual circuit (i.e. VRRP, RSMLT)."
|
|
::= { rcIpv6DestinationCacheEntry 4 }
|
|
|
|
rcIpv6DCacheIfData OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to display additional information about virtual
|
|
circuits (i.e. if it is a VRRP or RSMLT circuit, the vrId
|
|
if it is a VRRP circuit); no information is displayed for
|
|
real circuits."
|
|
::= { rcIpv6DestinationCacheEntry 5 }
|
|
|
|
rcIpv6DCachePmtu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Path MTU for the entry."
|
|
::= { rcIpv6DestinationCacheEntry 6 }
|
|
|
|
rcIpv6DCachePmtuAge OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates how much time (in seconds) has passed since the PMTU
|
|
was updated the last time."
|
|
::= { rcIpv6DestinationCacheEntry 7 }
|
|
|
|
--END OF IPv6 DESTINATION CACHE SECTION
|
|
|
|
-- IPv6 BFD Table
|
|
|
|
rcIpv6InterfaceBfdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6InterfaceBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "BFD configuration table"
|
|
::= { rcIpv6Objects 14 }
|
|
|
|
rcIpv6InterfaceBfdEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6InterfaceBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to configure BFD on a particular interface. An
|
|
entry is created automatically when the variable
|
|
rcIpv6InterfaceBfdEnable is set to TRUE and deleted when
|
|
rcIpv6InterfaceBfdEnable is set to FALSE."
|
|
INDEX { rcIpv6InterfaceBfdIfIndex }
|
|
::= { rcIpv6InterfaceBfdTable 1 }
|
|
|
|
RcIpv6InterfaceBfdEntry ::= SEQUENCE {
|
|
rcIpv6InterfaceBfdIfIndex InterfaceIndex,
|
|
rcIpv6InterfaceBfdMinRxInterval Integer32,
|
|
rcIpv6InterfaceBfdTxInterval Integer32,
|
|
rcIpv6InterfaceBfdMultiplier Integer32,
|
|
rcIpv6InterfaceBfdHoldOffInterval Unsigned32,
|
|
rcIpv6InterfaceBfdStaticFlag EnableValue
|
|
}
|
|
|
|
rcIpv6InterfaceBfdIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface number. The number can represent either
|
|
a physical or logical(VLAN) interface."
|
|
::= { rcIpv6InterfaceBfdEntry 1 }
|
|
|
|
rcIpv6InterfaceBfdMinRxInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (100..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "the min rx interval in milliseconds"
|
|
DEFVAL { 200 }
|
|
::= { rcIpv6InterfaceBfdEntry 2 }
|
|
|
|
rcIpv6InterfaceBfdTxInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (100..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "the desired tx interval in milliseconds"
|
|
DEFVAL { 200 }
|
|
::= { rcIpv6InterfaceBfdEntry 3 }
|
|
|
|
rcIpv6InterfaceBfdMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "the multiplier BFD wait before rx timeout"
|
|
DEFVAL { 3 }
|
|
::= { rcIpv6InterfaceBfdEntry 4 }
|
|
|
|
rcIpv6InterfaceBfdHoldOffInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the hold off timer interval, in
|
|
seconds. 0 means that hold off timer is disabled."
|
|
DEFVAL { 0 }
|
|
::= { rcIpv6InterfaceBfdEntry 6 }
|
|
|
|
rcIpv6InterfaceBfdStaticFlag OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the static-flag for bfd. When
|
|
disabled, the static route will go down, when bfd is
|
|
disabled."
|
|
DEFVAL { enable }
|
|
::= { rcIpv6InterfaceBfdEntry 7}
|
|
|
|
-- End of IPv6 BFD Table
|
|
|
|
|
|
-- IPv6 Route Table
|
|
|
|
rcIpv6RouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This entity's IPV6 Routing table."
|
|
::= { rcIpv6Objects 15 }
|
|
|
|
rcIpv6RouteEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A route to a particular destination."
|
|
INDEX { rcIpv6RouteDest,
|
|
rcIpv6RoutePfxLength,
|
|
rcIpv6RouteIndex }
|
|
::= { rcIpv6RouteTable 1 }
|
|
|
|
RcIpv6RouteEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RouteDest Ipv6Address,
|
|
rcIpv6RoutePfxLength INTEGER,
|
|
rcIpv6RouteIndex Unsigned32,
|
|
rcIpv6RouteNextHopId DisplayString
|
|
}
|
|
|
|
rcIpv6RouteDest OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IPv6 address of this route.
|
|
This object may not take a Multicast address
|
|
value."
|
|
::= { rcIpv6RouteEntry 1 }
|
|
|
|
rcIpv6RoutePfxLength OBJECT-TYPE
|
|
SYNTAX INTEGER(0..128)
|
|
UNITS "bits"
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the prefix length of the destination
|
|
address."
|
|
::= { rcIpv6RouteEntry 2 }
|
|
|
|
rcIpv6RouteIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value which uniquely identifies the route
|
|
among the routes to the same network layer
|
|
destination. The way this value is chosen is
|
|
implementation specific but it must be unique for
|
|
rcIpv6RouteDest/rcIpv6RoutePfxLength pair and remain
|
|
constant for the life of the route."
|
|
::= { rcIpv6RouteEntry 3 }
|
|
|
|
rcIpv6RouteNextHopId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identifier of the next-hop, hostname or mac adress."
|
|
::= { rcIpv6RouteEntry 4 }
|
|
|
|
-- End of IPv6 Route Table
|
|
|
|
-- IPv6 Default Routers Table
|
|
|
|
rcIpv6DefaultRoutersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6DefaultRoutersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 Default Routers Table."
|
|
::= { rcIpv6Objects 16 }
|
|
|
|
rcIpv6DefaultRoutersEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6DefaultRoutersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The entry for the IPv6 Default Routers Table."
|
|
INDEX { rcIpv6DefaultRoutersAddress, rcIpv6DefaultRoutersIfIndex }
|
|
::= { rcIpv6DefaultRoutersTable 1 }
|
|
|
|
RcIpv6DefaultRoutersEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6DefaultRoutersAddress Ipv6Address,
|
|
rcIpv6DefaultRoutersIfIndex Unsigned32,
|
|
rcIpv6DefaultRoutersLifetime Integer32,
|
|
rcIpv6DefaultRoutersActive TruthValue
|
|
}
|
|
|
|
rcIpv6DefaultRoutersAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Learned Router Address for an IPv6 Default Routers Entry."
|
|
::= { rcIpv6DefaultRoutersEntry 1 }
|
|
|
|
rcIpv6DefaultRoutersIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface number for an IPv6 Default Routers Entry."
|
|
::= { rcIpv6DefaultRoutersEntry 2 }
|
|
|
|
rcIpv6DefaultRoutersLifetime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Remaining Router Lifetime for an IPv6 Default Routers Entry."
|
|
::= { rcIpv6DefaultRoutersEntry 3 }
|
|
|
|
rcIpv6DefaultRoutersActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "See if a default router is active for an IPv6 Default Routers Entry."
|
|
::= { rcIpv6DefaultRoutersEntry 4 }
|
|
|
|
-- End of IPv6 Default Router Table
|
|
|
|
-- IPv6 MLD Host Cache Table
|
|
|
|
rcIpv6MLDHostCacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6MLDHostCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 MLD Host Cache Table."
|
|
::= { rcIpv6Objects 17 }
|
|
|
|
rcIpv6MLDHostCacheEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6MLDHostCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The entry for the IPv6 MLD Host Cache Table."
|
|
INDEX { rcIpv6MLDHostCacheIfIndex, rcIpv6MLDHostCacheGrpAddress }
|
|
::= { rcIpv6MLDHostCacheTable 1 }
|
|
|
|
RcIpv6MLDHostCacheEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6MLDHostCacheIfIndex Unsigned32,
|
|
rcIpv6MLDHostCacheGrpAddress Ipv6Address,
|
|
rcIpv6MLDHostCacheGrpLocallyRegistered Integer32,
|
|
rcIpv6MLDHostCacheGrpLastReporter Ipv6Address,
|
|
rcIpv6MLDHostCacheGrpUpTime Unsigned32,
|
|
rcIpv6MLDHostCacheGrpExpiryTime Unsigned32,
|
|
rcIpv6MLDHostCacheGrpFilterMode Unsigned32
|
|
}
|
|
|
|
rcIpv6MLDHostCacheIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface number for an IPv6 MLD Host Cache Entry."
|
|
::= { rcIpv6MLDHostCacheEntry 1 }
|
|
|
|
rcIpv6MLDHostCacheGrpAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Group Address for an IPv6 MLD Host Cache Entry."
|
|
::= { rcIpv6MLDHostCacheEntry 2 }
|
|
|
|
rcIpv6MLDHostCacheGrpLocallyRegistered OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Group Locally Registered for an IPv6 MLD Host Cache Entry."
|
|
::= { rcIpv6MLDHostCacheEntry 3 }
|
|
|
|
rcIpv6MLDHostCacheGrpLastReporter OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Group Last Reporter Address for an IPv6 MLD Host Cache Entry."
|
|
::= { rcIpv6MLDHostCacheEntry 4 }
|
|
|
|
rcIpv6MLDHostCacheGrpUpTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Group Uptime for an IPv6 MLD Host Cache Entry."
|
|
::= { rcIpv6MLDHostCacheEntry 5 }
|
|
|
|
rcIpv6MLDHostCacheGrpExpiryTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Group Expiry Time for an IPv6 MLD Host Cache Entry."
|
|
::= { rcIpv6MLDHostCacheEntry 6 }
|
|
|
|
rcIpv6MLDHostCacheGrpFilterMode OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Group Filter Mode for an IPv6 MLD Host Cache Entry."
|
|
::= { rcIpv6MLDHostCacheEntry 7 }
|
|
|
|
-- End of IPv6 MLD Host Cache Table
|
|
|
|
--------------------------------------------------------------
|
|
--
|
|
-- rcTunnelXInetConfigTable
|
|
--
|
|
--------------------------------------------------------------
|
|
|
|
rcTunnelXInetConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcTunnelXInetConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that containing information on configured tunnels."
|
|
::= { rcIpv6Objects 18 }
|
|
|
|
rcTunnelXInetConfigEntry OBJECT-TYPE
|
|
SYNTAX RcTunnelXInetConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing additional tunnel information. This
|
|
object augments tunnelInetConfigEntry."
|
|
AUGMENTS { tunnelInetConfigEntry }
|
|
::= { rcTunnelXInetConfigTable 1 }
|
|
|
|
RcTunnelXInetConfigEntry ::=
|
|
SEQUENCE {
|
|
rcTunnelXInetConfigStatus INTEGER,
|
|
rcTunnelXInetConfigMode INTEGER
|
|
}
|
|
|
|
rcTunnelXInetConfigStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the tunnel status"
|
|
DEFVAL { inactive }
|
|
::= { rcTunnelXInetConfigEntry 1 }
|
|
|
|
rcTunnelXInetConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
management(1),
|
|
data(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the tunnel mode"
|
|
DEFVAL { management }
|
|
::= { rcTunnelXInetConfigEntry 2 }
|
|
|
|
rcIpv6RouteExtensionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RouteExtensionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This entity's IPV6 Routing table."
|
|
::= { rcIpv6Objects 19 }
|
|
|
|
rcIpv6RouteExtensionEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RouteExtensionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A route to a particular destination."
|
|
AUGMENTS {
|
|
ipv6RouteEntry
|
|
}
|
|
::= { rcIpv6RouteExtensionTable 1 }
|
|
|
|
RcIpv6RouteExtensionEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RouteExtensionNextHopId DisplayString,
|
|
rcIpv6RouteExtensionProtocol INTEGER,
|
|
rcIpv6RouteExtensionPathType INTEGER
|
|
}
|
|
|
|
rcIpv6RouteExtensionNextHopId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Identifier of the next-hop, hostname or mac adress."
|
|
::= { rcIpv6RouteExtensionEntry 1 }
|
|
|
|
rcIpv6RouteExtensionProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
-- non-protocol information,
|
|
-- e.g., manually configured
|
|
local(2), -- entries
|
|
|
|
netmgmt(3), -- static route
|
|
|
|
-- obtained via Neighbor
|
|
-- Discovery protocol,
|
|
ndisc(4), -- e.g., result of Redirect
|
|
|
|
-- the following are all
|
|
-- dynamic routing protocols
|
|
rip(5), -- RIPng
|
|
ospf(6), -- Open Shortest Path First
|
|
bgp(7), -- Border Gateway Protocol
|
|
idrp(8), -- InterDomain Routing Protocol
|
|
igrp(9), -- InterGateway Routing Protocol
|
|
isis(10) -- ISIS Protocol
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The routing mechanism via which this route was learned."
|
|
::= { rcIpv6RouteExtensionEntry 2 }
|
|
|
|
rcIpv6RouteExtensionPathType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b(1), -- Best non-ECMP path
|
|
be(2), -- Best ECMP path
|
|
a(3), -- Alternate non-ECMP path
|
|
ae(4) -- Alternate ECMP path
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates IPv6 route path type: best, alternative, ECMP."
|
|
::= { rcIpv6RouteExtensionEntry 3 }
|
|
|
|
-- Ipv6 Route Pref Table
|
|
|
|
rcIpv6RoutePrefTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6RoutePrefEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 Route Pref table. This table and
|
|
rcIpNewRoutePrefTable is designed
|
|
to obsolete the rcIpRoutePrefTable"
|
|
::= { rcIpv6Objects 20 }
|
|
|
|
rcIpv6RoutePrefEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6RoutePrefEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ipv6 Route Pref Table."
|
|
INDEX { rcIpv6RoutePrefDefaultValue }
|
|
::= { rcIpv6RoutePrefTable 1 }
|
|
|
|
RcIpv6RoutePrefEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6RoutePrefDefaultValue Integer32,
|
|
rcIpv6RoutePrefProtocol INTEGER,
|
|
rcIpv6RoutePrefConfiguredValue Integer32
|
|
}
|
|
|
|
rcIpv6RoutePrefDefaultValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Shows the default preference value for the given
|
|
protocol."
|
|
::= { rcIpv6RoutePrefEntry 1 }
|
|
|
|
rcIpv6RoutePrefProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
static(2),
|
|
ospfv3Intra(3),
|
|
ospfv3Inter(4),
|
|
ospfv3External1(5),
|
|
ospfv3External2(6),
|
|
spbmLevel1(7),
|
|
ebgp(8),
|
|
ibgp(9),
|
|
ripng(10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Protocol name"
|
|
::= { rcIpv6RoutePrefEntry 2 }
|
|
|
|
rcIpv6RoutePrefConfiguredValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value is configurable by the user"
|
|
::= { rcIpv6RoutePrefEntry 3 }
|
|
|
|
--
|
|
-- IPSEC
|
|
--
|
|
|
|
--
|
|
-- Ipsec policy table
|
|
--
|
|
|
|
rcIpsecPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpsecPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The policy table is used to store all the
|
|
attribute values under the policy. An IPSec
|
|
policy typically consists of a policy name,
|
|
raddr and laddr to which the policy is associated
|
|
to, the protocol to which policy is applied,and
|
|
the associated action whether to permit or drop
|
|
the packets"
|
|
::= { rcIpsec 1 }
|
|
|
|
rcIpsecPolicyEntry OBJECT-TYPE
|
|
SYNTAX RcIpsecPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Ipsec Policy table entry."
|
|
INDEX {
|
|
rcIpsecPolicyName
|
|
}
|
|
::= { rcIpsecPolicyTable 1 }
|
|
|
|
RcIpsecPolicyEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIpsecPolicyName DisplayString,
|
|
rcIpsecPolicyDstAddressType InetAddressType,
|
|
rcIpsecPolicyDstAddress InetAddress,
|
|
rcIpsecPolicySrcAddressType InetAddressType,
|
|
rcIpsecPolicySrcAddress InetAddress,
|
|
rcIpsecPolicySrcPort INTEGER,
|
|
rcIpsecPolicyDstPort INTEGER,
|
|
rcIpsecPolicyAdminFlag TruthValue,
|
|
rcIpsecPolicyL4Protocol INTEGER,
|
|
rcIpsecPolicyAction INTEGER,
|
|
rcIpsecPolicyRowStatus RowStatus
|
|
}
|
|
|
|
rcIpsecPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains name of the Ipsec
|
|
policy."
|
|
::= { rcIpsecPolicyEntry 1 }
|
|
|
|
rcIpsecPolicyDstAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIpsecPolicyDstAddress.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIpsecPolicyEntry 2 }
|
|
|
|
rcIpsecPolicyDstAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The destination interface address to which
|
|
the policy is added."
|
|
::= { rcIpsecPolicyEntry 3 }
|
|
|
|
rcIpsecPolicySrcAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in the rcIpsecPolicySrcAddress.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIpsecPolicyEntry 4 }
|
|
|
|
rcIpsecPolicySrcAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The source interface address of the router
|
|
to which the policy is added."
|
|
::= { rcIpsecPolicyEntry 5 }
|
|
|
|
rcIpsecPolicySrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The TCP/UDP source port number for which the
|
|
policy is added."
|
|
::= { rcIpsecPolicyEntry 6 }
|
|
|
|
rcIpsecPolicyDstPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The TCP/UDP destination port number for which
|
|
the policy is added."
|
|
::= { rcIpsecPolicyEntry 7 }
|
|
|
|
rcIpsecPolicyAdminFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The flag is used to enable the policy created."
|
|
::= { rcIpsecPolicyEntry 8 }
|
|
|
|
rcIpsecPolicyL4Protocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
tcp(6),
|
|
udp(17),
|
|
icmpv6(58),
|
|
ospfv3(89),
|
|
icmp(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the IP protocol number
|
|
for the l4 protocol to which this particular
|
|
policy is added."
|
|
DEFVAL { tcp }
|
|
::= { rcIpsecPolicyEntry 9 }
|
|
|
|
rcIpsecPolicyAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
permit(1),
|
|
drop(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The object contains a value that set the
|
|
action for the IPSec policy, either to permit
|
|
or drop the packet."
|
|
DEFVAL { permit }
|
|
::= { rcIpsecPolicyEntry 10 }
|
|
|
|
rcIpsecPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the
|
|
rcIpsecPolicyTable."
|
|
::= { rcIpsecPolicyEntry 11 }
|
|
|
|
--
|
|
-- Ipsec SA struct table
|
|
--
|
|
|
|
rcIpsecSATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpsecSAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Security Association(SA) table is used to
|
|
store all the attribute values under the security
|
|
association. An IPSec SA typically consists of SA
|
|
name, security parameter index, encapsulation
|
|
protocol, authentication algorithm, encryption
|
|
algorithm, mode of SA, key mode used and SA lifetime."
|
|
::= { rcIpsec 2 }
|
|
|
|
rcIpsecSAEntry OBJECT-TYPE
|
|
SYNTAX RcIpsecSAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A Security Association structure table
|
|
entry."
|
|
INDEX {
|
|
rcIpsecSAName
|
|
}
|
|
::= { rcIpsecSATable 1 }
|
|
|
|
RcIpsecSAEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIpsecSAName DisplayString,
|
|
rcIpsecSASpi Unsigned32,
|
|
rcIpsecSAHashAlgorithm INTEGER,
|
|
rcIpsecSAEncryptAlgorithm INTEGER,
|
|
rcIpsecSAAuthMethod INTEGER,
|
|
rcIpsecSAMode INTEGER,
|
|
rcIpsecSAKeyMode INTEGER,
|
|
rcIpsecSAEncryptKeyName DisplayString,
|
|
rcIpsecSAHashKeyName DisplayString,
|
|
rcIpsecSAHashKeyLength Integer32,
|
|
rcIpsecSAEncryptKeyLength Integer32,
|
|
rcIpsecSALifetimeSeconds Unsigned32,
|
|
rcIpsecSALifetimeKbytes Unsigned32,
|
|
rcIpsecSARowStatus RowStatus
|
|
}
|
|
|
|
rcIpsecSAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains name of the security
|
|
association."
|
|
::= { rcIpsecSAEntry 1 }
|
|
|
|
rcIpsecSASpi OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object contains, Security Parameter Index
|
|
(SPI), which is an identification tag added to
|
|
the header. This along with protocol value and
|
|
destination are used to identify a SA"
|
|
::= { rcIpsecSAEntry 2 }
|
|
|
|
rcIpsecSAHashAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sha1(1),
|
|
aesXcbc(2),
|
|
md5(3),
|
|
null(4),
|
|
sha2(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object contains the hash algorithm
|
|
used in this SA. The algorithms used are
|
|
SHA1, AES_CBC, MD5 and SHA2"
|
|
DEFVAL { sha2 }
|
|
::= { rcIpsecSAEntry 3 }
|
|
|
|
rcIpsecSAEncryptAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
des3Cbc(1),
|
|
aes128Cbc(2),
|
|
aesCtr(3),
|
|
null(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object contains the encryption
|
|
algorithm used in this SA. The algorithms
|
|
used are 3DES_CBC, AES128_CBC and AES_CTR"
|
|
DEFVAL { aes128Cbc }
|
|
::= { rcIpsecSAEntry 4 }
|
|
|
|
rcIpsecSAAuthMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ah(1),
|
|
es(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object specifies authentication Method
|
|
of the SA. It can be AH (Authentication Header)
|
|
or ES (Encapsulated Security Payload)."
|
|
DEFVAL { es }
|
|
::= { rcIpsecSAEntry 5 }
|
|
|
|
rcIpsecSAMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transport(1),
|
|
tunnel(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This flag is used to switch between transport
|
|
and tunnel mode. Transport mode is used to
|
|
protect the upper layer protocols whereas tunnel
|
|
mode is used to protect the whole IP packet."
|
|
DEFVAL { transport }
|
|
::= { rcIpsecSAEntry 6 }
|
|
|
|
rcIpsecSAKeyMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
manual(1),
|
|
auto(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This flag selects configuration mode of shared
|
|
keys, manual or automatic."
|
|
DEFVAL { manual }
|
|
::= { rcIpsecSAEntry 7 }
|
|
|
|
rcIpsecSAEncryptKeyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Key Value for the Encryption Key. Maximum
|
|
size is 64"
|
|
::= { rcIpsecSAEntry 8 }
|
|
|
|
rcIpsecSAHashKeyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Key value for the Hash Key. Maximum size
|
|
is 64."
|
|
::= { rcIpsecSAEntry 9 }
|
|
|
|
rcIpsecSAHashKeyLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..64)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Number of bits used in the Hash key.
|
|
The values are as follows:
|
|
AES-XCBC-MAC - 32
|
|
MD5 - 32
|
|
SHA1 - 40
|
|
SHA2 - 64"
|
|
::= { rcIpsecSAEntry 10 }
|
|
|
|
rcIpsecSAEncryptKeyLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..64)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Number of bits used in the Encryption key.
|
|
The values are as follows:
|
|
3DES - 48
|
|
AES-CBC - 32, 48, 64
|
|
AES-CTR - 32"
|
|
::= { rcIpsecSAEntry 11 }
|
|
|
|
rcIpsecSALifetimeSeconds OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The life time in seconds for a security
|
|
association."
|
|
::= { rcIpsecSAEntry 12 }
|
|
|
|
rcIpsecSALifetimeKbytes OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The traffic, in kilobytes, that can pass
|
|
between IPSec peers using a given security
|
|
association before that security association
|
|
expires."
|
|
::= { rcIpsecSAEntry 13 }
|
|
|
|
rcIpsecSARowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the
|
|
rcIpsecSATable."
|
|
::= { rcIpsecSAEntry 14 }
|
|
|
|
--
|
|
-- Ipsec Interface Policy Table
|
|
--
|
|
|
|
rcIpsecInterfacePolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpsecInterfacePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to store the policy and
|
|
interface details while linking the policy
|
|
to an interface. This table contains the
|
|
policy name, ifindex, direction on which
|
|
the policy is applied and the enable flag to
|
|
enable/disable ipsec on the interface."
|
|
::= { rcIpsec 3 }
|
|
|
|
rcIpsecInterfacePolicyEntry OBJECT-TYPE
|
|
SYNTAX RcIpsecInterfacePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A Policy interface link table entry."
|
|
INDEX {
|
|
rcIpsecInterfacePolicyName,
|
|
rcIpsecInterfacePolicyIfIndex
|
|
}
|
|
::= { rcIpsecInterfacePolicyTable 1 }
|
|
|
|
RcIpsecInterfacePolicyEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIpsecInterfacePolicyName DisplayString,
|
|
rcIpsecInterfacePolicyIfIndex InterfaceIndex,
|
|
rcIpsecInterfacePolicyIfEnabled TruthValue,
|
|
rcIpsecInterfacePolicyIfDirection INTEGER,
|
|
rcIpsecInterfacePolicyRowStatus RowStatus
|
|
}
|
|
|
|
rcIpsecInterfacePolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains name of the Ipsec
|
|
policy that is to be linked with the
|
|
interface."
|
|
::= { rcIpsecInterfacePolicyEntry 1 }
|
|
|
|
rcIpsecInterfacePolicyIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "If index to which the policy is applied."
|
|
::= { rcIpsecInterfacePolicyEntry 2 }
|
|
|
|
rcIpsecInterfacePolicyIfEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value for this attribute is set when
|
|
Ipsec is enabled on the interface and admin
|
|
state of the policy is in enabled state"
|
|
::= { rcIpsecInterfacePolicyEntry 3 }
|
|
|
|
rcIpsecInterfacePolicyIfDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inBound(1),
|
|
outBound(2),
|
|
bothDirections(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object contains the direction of
|
|
traffic in the interface, where security
|
|
needs to be applied. Whether its inBound,
|
|
outBound or both Directions"
|
|
::= { rcIpsecInterfacePolicyEntry 4 }
|
|
|
|
rcIpsecInterfacePolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the
|
|
rcIpsecInterfacePolicyTable."
|
|
::= { rcIpsecInterfacePolicyEntry 5 }
|
|
|
|
--
|
|
-- Ipsec Ospf6 Virtual Link Policy table
|
|
--
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpsecOspf6VirtualLinkPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to store all the
|
|
attribute values under Ospf virtual
|
|
link policy. This table contains the
|
|
virtual link area id, neighbour id, SA name
|
|
policy action, policy direction, admin status
|
|
of the policy, source address, destination
|
|
address, virtual link id, interface index
|
|
and operation status of the virtual link."
|
|
::= { rcIpsec 4 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyEntry OBJECT-TYPE
|
|
SYNTAX RcIpsecOspf6VirtualLinkPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An OSPF virtual link Policy table entry."
|
|
INDEX {
|
|
rcIpsecOspf6VirtualLinkPolicyAreaId,
|
|
rcIpsecOspf6VirtualLinkPolicyNeighbor
|
|
}
|
|
::= { rcIpsecOspf6VirtualLinkPolicyTable 1 }
|
|
|
|
RcIpsecOspf6VirtualLinkPolicyEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIpsecOspf6VirtualLinkPolicyAreaId IpAddress,
|
|
rcIpsecOspf6VirtualLinkPolicyNeighbor IpAddress,
|
|
rcIpsecOspf6VirtualLinkPolicySAName DisplayString,
|
|
rcIpsecOspf6VirtualLinkPolicyAdminStatus TruthValue,
|
|
rcIpsecOspf6VirtualLinkPolicyAction INTEGER,
|
|
rcIpsecOspf6VirtualLinkPolicyDirection INTEGER,
|
|
rcIpsecOspf6VirtualLinkPolicySrcAddressType InetAddressType,
|
|
rcIpsecOspf6VirtualLinkPolicySrcAddress InetAddress,
|
|
rcIpsecOspf6VirtualLinkPolicyDstAddressType InetAddressType,
|
|
rcIpsecOspf6VirtualLinkPolicyDstAddress InetAddress,
|
|
rcIpsecOspf6VirtualLinkPolicyLinkID INTEGER,
|
|
rcIpsecOspf6VirtualLinkPolicyIfIndex InterfaceIndex,
|
|
rcIpsecOspf6VirtualLinkPolicyOperStatus INTEGER,
|
|
rcIpsecOspf6VirtualLinkPolicyRowStatus RowStatus
|
|
}
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A 32-bit integer uniquely identifying
|
|
the Ospf virtual link area."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 1 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyNeighbor OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A 32-bit integer uniquely identifying
|
|
the Ospf virtual link neighbour."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 2 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicySAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This object contains the security
|
|
association linked to the virtual link."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 3 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The flag is used to enable the policy
|
|
created."
|
|
DEFVAL { false }
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 4 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
permit(1),
|
|
drop(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The object contains a value that set the
|
|
action of the IPSec Ospf virtual link policy,
|
|
either to permit or drop."
|
|
DEFVAL { permit }
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 5 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inBound(1),
|
|
outBound(2),
|
|
bothDirections(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The object indicates the policy direction
|
|
for the virtual link."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 6 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicySrcAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in thercIpsecOspf6VirtualLinkSrcAddress.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 7 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicySrcAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The source interface address to which the
|
|
policy is added."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 8 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyDstAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the type of address
|
|
field in thercIpsecOspf6VirtualLinkDstAddress.
|
|
Only IPv6 address types are supported for
|
|
this release."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 9 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyDstAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The destination interface address to which
|
|
the policy is added."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 10 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyLinkID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object contains unique id for an ospf
|
|
virtual link."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 11 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interface If index to which Ospf
|
|
virtual link the policy is added."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 12 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operation status of the link, up or down."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 13 }
|
|
|
|
rcIpsecOspf6VirtualLinkPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the
|
|
rcIpsecOspf6VirtualLinkPolicyTable."
|
|
::= { rcIpsecOspf6VirtualLinkPolicyEntry 14 }
|
|
|
|
--
|
|
-- Ipsec Policy SA Table
|
|
--
|
|
|
|
rcIpsecPolicySALinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpsecPolicySALinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to store the policy and
|
|
security association details while linking
|
|
the policy to a SA. This table contains the
|
|
policy name, and the SA name to which the
|
|
policy is linked."
|
|
::= { rcIpsec 5 }
|
|
|
|
rcIpsecPolicySALinkEntry OBJECT-TYPE
|
|
SYNTAX RcIpsecPolicySALinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A Policy interface link table entry."
|
|
INDEX {
|
|
rcIpsecPolicySALinkPolicyName,
|
|
rcIpsecPolicySALinkSAName
|
|
}
|
|
::= { rcIpsecPolicySALinkTable 1 }
|
|
|
|
RcIpsecPolicySALinkEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIpsecPolicySALinkPolicyName DisplayString,
|
|
rcIpsecPolicySALinkSAName DisplayString,
|
|
rcIpsecPolicySALinkRowStatus RowStatus
|
|
}
|
|
|
|
rcIpsecPolicySALinkPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains name of the Ipsec
|
|
policy."
|
|
::= { rcIpsecPolicySALinkEntry 1 }
|
|
|
|
rcIpsecPolicySALinkSAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This object contains name of the Security
|
|
Association."
|
|
::= { rcIpsecPolicySALinkEntry 2 }
|
|
|
|
rcIpsecPolicySALinkRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the
|
|
rcIpsecPolicySALinkTable."
|
|
::= { rcIpsecPolicySALinkEntry 3 }
|
|
|
|
--
|
|
-- Ipsec Stats table
|
|
--
|
|
|
|
rcIpsecStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpsecStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This contains the IPSec statistics / counter
|
|
values on the switch level for all the IPSec
|
|
enabled interfaces."
|
|
::= { rcIpsec 6 }
|
|
|
|
rcIpsecStatisticsEntry OBJECT-TYPE
|
|
SYNTAX RcIpsecStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Ipsec stats table entry."
|
|
INDEX { rcIpsecStatisticsIfIndex }
|
|
::= { rcIpsecStatisticsTable 1 }
|
|
|
|
RcIpsecStatisticsEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcIpsecStatisticsIfIndex InterfaceIndex,
|
|
rcIpsecStatisticsInSuccesses Counter64,
|
|
rcIpsecStatisticsInSPViolations Counter64,
|
|
rcIpsecStatisticsInNotEnoughMemories Counter64,
|
|
rcIpsecStatisticsInAHESPReplays Counter64,
|
|
rcIpsecStatisticsInESPReplays Counter64,
|
|
rcIpsecStatisticsInAHFailures Counter64,
|
|
rcIpsecStatisticsInESPFailures Counter64,
|
|
rcIpsecStatisticsOutSuccesses Counter64,
|
|
rcIpsecStatisticsOutSPViolations Counter64,
|
|
rcIpsecStatisticsOutNotEnoughMemories Counter64,
|
|
rcIpsecStatisticsgeneralError Counter64,
|
|
rcIpsecStatisticsInAHSuccesses Counter64,
|
|
rcIpsecStatisticsOutAHSuccesses Counter64,
|
|
rcIpsecStatisticsInESPSuccesses Counter64,
|
|
rcIpsecStatisticsOutESPSuccesses Counter64,
|
|
rcIpsecStatisticsOutKBytes Counter64,
|
|
rcIpsecStatisticsOutBytes Counter64,
|
|
rcIpsecStatisticsInKBytes Counter64,
|
|
rcIpsecStatisticsInBytes Counter64,
|
|
rcIpsecStatisticsTotalPacketsProcessed Counter64,
|
|
rcIpsecStatisticsTotalPacketsByPassed Counter64,
|
|
rcIpsecStatisticsOutAHFailures Counter64,
|
|
rcIpsecStatisticsOutESPFailures Counter64,
|
|
rcIpsecStatisticsInMD5Hmacs Counter64,
|
|
rcIpsecStatisticsInSHA1Hmacs Counter64,
|
|
rcIpsecStatisticsInAESXCBCs Counter64,
|
|
rcIpsecStatisticsInAnyNullAuth Counter64,
|
|
rcIpsecStatisticsIn3DESCBCs Counter64,
|
|
rcIpsecStatisticsInAESCBCs Counter64,
|
|
rcIpsecStatisticsInAESCTRs Counter64,
|
|
rcIpsecStatisticsInAnyNullEncrypt Counter64,
|
|
rcIpsecStatisticsOutMD5Hmacs Counter64,
|
|
rcIpsecStatisticsOutSHA1Hmacs Counter64,
|
|
rcIpsecStatisticsOutAESXCBCs Counter64,
|
|
rcIpsecStatisticsOutInAnyNullAuth Counter64,
|
|
rcIpsecStatisticsOut3DESCBCs Counter64,
|
|
rcIpsecStatisticsOutAESCBCs Counter64,
|
|
rcIpsecStatisticsOutAESCTRs Counter64,
|
|
rcIpsecStatisticsOutInAnyNullEncrypt Counter64
|
|
}
|
|
|
|
rcIpsecStatisticsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface If index for which the statistics is
|
|
captured for this interface."
|
|
::= { rcIpsecStatisticsEntry 1 }
|
|
|
|
rcIpsecStatisticsInSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of ingress packets successfully
|
|
carried on IPSec for this interface."
|
|
::= { rcIpsecStatisticsEntry 2 }
|
|
|
|
rcIpsecStatisticsInSPViolations OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of ingress packets discarded
|
|
by IPSec if security policy violation since boot
|
|
time for this interface."
|
|
::= { rcIpsecStatisticsEntry 3 }
|
|
|
|
rcIpsecStatisticsInNotEnoughMemories OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded
|
|
by IPSec if not enough memory available since
|
|
boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 4 }
|
|
|
|
rcIpsecStatisticsInAHESPReplays OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded
|
|
by IPSec if AH replay check failed since boot
|
|
time for this interface."
|
|
::= { rcIpsecStatisticsEntry 5 }
|
|
|
|
rcIpsecStatisticsInESPReplays OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded
|
|
by IPSec if ESP replay check failed since boot
|
|
time for this interface."
|
|
::= { rcIpsecStatisticsEntry 6 }
|
|
|
|
rcIpsecStatisticsInAHFailures OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded
|
|
by IPSec if AH authentication check failed since
|
|
boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 7 }
|
|
|
|
rcIpsecStatisticsInESPFailures OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded by
|
|
IPSec if ESP authentication check failed since boot
|
|
time for this interface."
|
|
::= { rcIpsecStatisticsEntry 8 }
|
|
|
|
rcIpsecStatisticsOutSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets successfully
|
|
carried on IPSec since boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 9 }
|
|
|
|
rcIpsecStatisticsOutSPViolations OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets discarded by
|
|
IPSec if security policy violation since boot time
|
|
for this interface."
|
|
::= { rcIpsecStatisticsEntry 10 }
|
|
|
|
rcIpsecStatisticsOutNotEnoughMemories OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets discarded by
|
|
IPSec if not enough memory available since boot time
|
|
for this interface."
|
|
::= { rcIpsecStatisticsEntry 11 }
|
|
|
|
rcIpsecStatisticsgeneralError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of general occurs since boot time
|
|
for this interface."
|
|
::= { rcIpsecStatisticsEntry 12 }
|
|
|
|
rcIpsecStatisticsInAHSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets carried by IPSec
|
|
if AH authentication succeeded since boot time
|
|
for this interface."
|
|
::= { rcIpsecStatisticsEntry 13 }
|
|
|
|
rcIpsecStatisticsOutAHSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets carried by IPSec
|
|
if AH authentication succeeded since boot time for this
|
|
interface."
|
|
::= { rcIpsecStatisticsEntry 14 }
|
|
|
|
rcIpsecStatisticsInESPSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets carried by IPSec
|
|
if ESP authentication succeeded since boot time for
|
|
this interface."
|
|
::= { rcIpsecStatisticsEntry 15 }
|
|
|
|
rcIpsecStatisticsOutESPSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets carried by IPSec
|
|
if ESP authentication succeeded since boot time for this
|
|
interface."
|
|
::= { rcIpsecStatisticsEntry 16 }
|
|
|
|
rcIpsecStatisticsOutKBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets greater than
|
|
1 KB for this interface."
|
|
::= { rcIpsecStatisticsEntry 17 }
|
|
|
|
rcIpsecStatisticsOutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound byte sized packets for
|
|
this interface"
|
|
::= { rcIpsecStatisticsEntry 18 }
|
|
|
|
rcIpsecStatisticsInKBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets greater than
|
|
1 KB for this interface."
|
|
::= { rcIpsecStatisticsEntry 19 }
|
|
|
|
rcIpsecStatisticsInBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound byte sized packets
|
|
for this interface."
|
|
::= { rcIpsecStatisticsEntry 20 }
|
|
|
|
rcIpsecStatisticsTotalPacketsProcessed OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets processed since boot
|
|
time for this interface."
|
|
::= { rcIpsecStatisticsEntry 21 }
|
|
|
|
rcIpsecStatisticsTotalPacketsByPassed OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets bypassed since boot
|
|
time for this interface."
|
|
::= { rcIpsecStatisticsEntry 22 }
|
|
|
|
rcIpsecStatisticsOutAHFailures OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets discarded by
|
|
IPSec if AH authentication check failed since boot
|
|
time for this interface."
|
|
::= { rcIpsecStatisticsEntry 23 }
|
|
|
|
rcIpsecStatisticsOutESPFailures OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets discarded by
|
|
IPSec if ESP authentication check failed since boot
|
|
time for this interface."
|
|
::= { rcIpsecStatisticsEntry 24 }
|
|
|
|
rcIpsecStatisticsInMD5Hmacs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound HMAC MD5 occurrences
|
|
since boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 25 }
|
|
|
|
rcIpsecStatisticsInSHA1Hmacs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound HMAC SHA1 occurrences
|
|
since boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 26 }
|
|
|
|
rcIpsecStatisticsInAESXCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound AES XCBC MAC occurrences
|
|
since boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 27 }
|
|
|
|
rcIpsecStatisticsInAnyNullAuth OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of inbound packets without any Authentication
|
|
algorithm for this interface."
|
|
::= { rcIpsecStatisticsEntry 28 }
|
|
|
|
rcIpsecStatisticsIn3DESCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound Triple DES CBC occurrences
|
|
since boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 29 }
|
|
|
|
rcIpsecStatisticsInAESCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound AES CBC occurrences since
|
|
boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 30 }
|
|
|
|
rcIpsecStatisticsInAESCTRs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound DES CBC occurrences since
|
|
boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 31 }
|
|
|
|
rcIpsecStatisticsInAnyNullEncrypt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of inbound packets without any Encryption
|
|
algorithm for this interface."
|
|
::= { rcIpsecStatisticsEntry 32 }
|
|
|
|
rcIpsecStatisticsOutMD5Hmacs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound HMAC MD5 occurrences since
|
|
boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 33 }
|
|
|
|
rcIpsecStatisticsOutSHA1Hmacs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound HMAC SHA1 occurrences since
|
|
boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 34 }
|
|
|
|
rcIpsecStatisticsOutAESXCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound AES XCBC MAC occurrences
|
|
since boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 35 }
|
|
|
|
rcIpsecStatisticsOutInAnyNullAuth OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of packets without any Authentication
|
|
algorithm for this interface."
|
|
::= { rcIpsecStatisticsEntry 36 }
|
|
|
|
rcIpsecStatisticsOut3DESCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound Triple DES CBC occurrences
|
|
since boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 37 }
|
|
|
|
rcIpsecStatisticsOutAESCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound AES CBC occurrences since
|
|
boot time for this interface."
|
|
::= { rcIpsecStatisticsEntry 38 }
|
|
|
|
rcIpsecStatisticsOutAESCTRs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound DES CBC occurrence since boot
|
|
time for this interface."
|
|
::= { rcIpsecStatisticsEntry 39 }
|
|
|
|
rcIpsecStatisticsOutInAnyNullEncrypt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of packets without any Encryption algorithm
|
|
for this interface."
|
|
::= { rcIpsecStatisticsEntry 40 }
|
|
|
|
--
|
|
-- Ipsec Global Statistics Scalars
|
|
--
|
|
|
|
rcIpsecGlobalStatisticsScalars OBJECT IDENTIFIER ::= { rcIpsec 7 }
|
|
|
|
rcIpsecGlobalStatisticsInSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of ingress packets successfully
|
|
carried on IPSec."
|
|
::= { rcIpsecGlobalStatisticsScalars 1 }
|
|
|
|
rcIpsecGlobalStatisticsInSPViolations OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of ingress packets discarded
|
|
by IPSec if security policy violation since boot
|
|
time."
|
|
::= { rcIpsecGlobalStatisticsScalars 2 }
|
|
|
|
rcIpsecGlobalStatisticsInNotEnoughMemories OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded
|
|
by IPSec if not enough memory available since
|
|
boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 3 }
|
|
|
|
rcIpsecGlobalStatisticsInAHESPReplays OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded
|
|
by IPSec if AH replay check failed since boot
|
|
time."
|
|
::= { rcIpsecGlobalStatisticsScalars 4 }
|
|
|
|
rcIpsecGlobalStatisticsInESPReplays OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded
|
|
by IPSec if ESP replay check failed since boot
|
|
time."
|
|
::= { rcIpsecGlobalStatisticsScalars 5 }
|
|
|
|
rcIpsecGlobalStatisticsInAHFailures OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded
|
|
by IPSec if AH authentication check failed since
|
|
boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 6 }
|
|
|
|
rcIpsecGlobalStatisticsInESPFailures OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets discarded by
|
|
IPSec if ESP authentication check failed since boot
|
|
time."
|
|
::= { rcIpsecGlobalStatisticsScalars 7 }
|
|
|
|
rcIpsecGlobalStatisticsOutSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets successfully
|
|
carried on IPSec since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 8 }
|
|
|
|
rcIpsecGlobalStatisticsOutSPViolations OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets discarded by
|
|
IPSec if security policy violation since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 9 }
|
|
|
|
rcIpsecGlobalStatisticsOutNotEnoughMemories OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets discarded by
|
|
IPSec if not enough memory available since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 10 }
|
|
|
|
rcIpsecGlobalStatisticsgeneralError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of general occurs since boot time"
|
|
::= { rcIpsecGlobalStatisticsScalars 11 }
|
|
|
|
rcIpsecGlobalStatisticsInAHSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets carried by IPSec
|
|
if AH authentication succeeded since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 12 }
|
|
|
|
rcIpsecGlobalStatisticsOutAHSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets carried by IPSec
|
|
if AH authentication succeeded since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 13 }
|
|
|
|
rcIpsecGlobalStatisticsInESPSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets carried by IPSec
|
|
if ESP authentication succeeded since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 14 }
|
|
|
|
rcIpsecGlobalStatisticsOutESPSuccesses OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets carried by IPSec
|
|
if ESP authentication succeeded since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 15 }
|
|
|
|
rcIpsecGlobalStatisticsOutKBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets greater than
|
|
1 KB."
|
|
::= { rcIpsecGlobalStatisticsScalars 16 }
|
|
|
|
rcIpsecGlobalStatisticsOutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound byte sized packets"
|
|
::= { rcIpsecGlobalStatisticsScalars 17 }
|
|
|
|
rcIpsecGlobalStatisticsInKBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound packets greater than
|
|
1 KB."
|
|
::= { rcIpsecGlobalStatisticsScalars 18 }
|
|
|
|
rcIpsecGlobalStatisticsInBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound byte sized packets."
|
|
::= { rcIpsecGlobalStatisticsScalars 19 }
|
|
|
|
rcIpsecGlobalStatisticsTotalPacketsProcessed OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets processed since boot
|
|
time."
|
|
::= { rcIpsecGlobalStatisticsScalars 20 }
|
|
|
|
rcIpsecGlobalStatisticsTotalPacketsByPassed OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets bypassed since boot
|
|
time."
|
|
::= { rcIpsecGlobalStatisticsScalars 21 }
|
|
|
|
rcIpsecGlobalStatisticsOutAHFailures OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets discarded by
|
|
IPSec if AH authentication check failed since boot
|
|
time."
|
|
::= { rcIpsecGlobalStatisticsScalars 22 }
|
|
|
|
rcIpsecGlobalStatisticsOutESPFailures OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound packets discarded by
|
|
IPSec if ESP authentication check failed since boot
|
|
time."
|
|
::= { rcIpsecGlobalStatisticsScalars 23 }
|
|
|
|
rcIpsecGlobalStatisticsInMD5Hmacs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound HMAC MD5 occurrences
|
|
since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 24 }
|
|
|
|
rcIpsecGlobalStatisticsInSHA1Hmacs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound HMAC SHA1 occurrences
|
|
since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 25 }
|
|
|
|
rcIpsecGlobalStatisticsInAESXCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound AES XCBC MAC occurrences
|
|
since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 26 }
|
|
|
|
rcIpsecGlobalStatisticsInAnyNullAuth OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of inbound packets without any Authentication
|
|
algorithm."
|
|
::= { rcIpsecGlobalStatisticsScalars 27 }
|
|
|
|
rcIpsecGlobalStatisticsIn3DESCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound Triple DES CBC occurrences
|
|
since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 28 }
|
|
|
|
rcIpsecGlobalStatisticsInAESCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of inbound AES CBC occurrences since
|
|
boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 29 }
|
|
|
|
rcIpsecGlobalStatisticsInAESCTRs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound DES CBC occurrences since
|
|
boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 30 }
|
|
|
|
rcIpsecGlobalStatisticsInAnyNullEncrypt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of inbound packets without any Encryption
|
|
algorithm"
|
|
::= { rcIpsecGlobalStatisticsScalars 31 }
|
|
|
|
rcIpsecGlobalStatisticsOutMD5Hmacs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound HMAC MD5 occurrences since
|
|
boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 32 }
|
|
|
|
rcIpsecGlobalStatisticsOutSHA1Hmacs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound HMAC SHA1 occurrences since
|
|
boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 33 }
|
|
|
|
rcIpsecGlobalStatisticsOutAESXCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound AES XCBC MAC occurrences
|
|
since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 34 }
|
|
|
|
rcIpsecGlobalStatisticsOutInAnyNullAuth OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of outbound packets without any Authentication
|
|
algorithm"
|
|
::= { rcIpsecGlobalStatisticsScalars 35 }
|
|
|
|
rcIpsecGlobalStatisticsOut3DESCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound Triple DES CBC occurrences
|
|
since boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 36 }
|
|
|
|
rcIpsecGlobalStatisticsOutAESCBCs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound AES CBC occurrences since
|
|
boot time."
|
|
::= { rcIpsecGlobalStatisticsScalars 37 }
|
|
|
|
rcIpsecGlobalStatisticsOutAESCTRs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outbound DES CBC occurrence since boot
|
|
time."
|
|
::= { rcIpsecGlobalStatisticsScalars 38 }
|
|
|
|
rcIpsecGlobalStatisticsOutInAnyNullEncrypt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of inbound packets without any Encryption
|
|
algorithm"
|
|
::= { rcIpsecGlobalStatisticsScalars 39 }
|
|
|
|
-- Ipsec END
|
|
|
|
--
|
|
--IPv6 FHS Snooping Table
|
|
--
|
|
|
|
rcIpv6FhsSnoopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6FhsSnoopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains the entries which are snooped by different methods."
|
|
::= { rcIpv6Objects 21 }
|
|
|
|
rcIpv6FhsSnoopEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6FhsSnoopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing a learned DHCPv6 binding."
|
|
INDEX { rcIpv6FhsSnoopVlanId, rcIpv6FhsSnoopIpv6Address }
|
|
::= { rcIpv6FhsSnoopTable 1 }
|
|
|
|
RcIpv6FhsSnoopEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6FhsSnoopVlanId RcVlanIdOrNone,
|
|
rcIpv6FhsSnoopIpv6Address Ipv6Address,
|
|
rcIpv6FhsSnoopMacAddress MacAddress,
|
|
rcIpv6FhsSnoopInterfaceIndex InterfaceIndex,
|
|
rcIpv6FhsSnoopEntryType INTEGER,
|
|
rcIpv6FhsSnoopEntrySource INTEGER,
|
|
rcIpv6FhsSnoopValidTime Unsigned32,
|
|
rcIpv6FhsSnoopTimeToExpiry Unsigned32,
|
|
rcIpv6FhsSnoopRowStatus RowStatus
|
|
}
|
|
|
|
rcIpv6FhsSnoopVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The VLAN to which the snooped entry belongs."
|
|
::= { rcIpv6FhsSnoopEntry 1 }
|
|
|
|
rcIpv6FhsSnoopIpv6Address OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IPv6 address assigned to this IPv6 host."
|
|
::= { rcIpv6FhsSnoopEntry 2 }
|
|
|
|
rcIpv6FhsSnoopMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of the snooped entry."
|
|
::= { rcIpv6FhsSnoopEntry 3 }
|
|
|
|
rcIpv6FhsSnoopInterfaceIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The interface to which the entry is learnt."
|
|
::= { rcIpv6FhsSnoopEntry 4 }
|
|
|
|
rcIpv6FhsSnoopEntryType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dynamic(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the type of entry - static (1) or dynamic (2). "
|
|
::= { rcIpv6FhsSnoopEntry 5 }
|
|
|
|
rcIpv6FhsSnoopEntrySource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dhcp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the method entry was learnt from - static (1) or dhcp (2). "
|
|
::= { rcIpv6FhsSnoopEntry 6 }
|
|
|
|
rcIpv6FhsSnoopValidTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The valid time for the snooped entry."
|
|
::= { rcIpv6FhsSnoopEntry 7 }
|
|
|
|
rcIpv6FhsSnoopTimeToExpiry OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time to expiry of the snooped entry."
|
|
::= { rcIpv6FhsSnoopEntry 8 }
|
|
|
|
|
|
rcIpv6FhsSnoopRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status to create/delete snooped entries."
|
|
::= { rcIpv6FhsSnoopEntry 9}
|
|
|
|
--
|
|
-- Notifications objects
|
|
--
|
|
rcIpv6FhsSnoopNotificationObjects OBJECT IDENTIFIER ::= { rcIpv6Objects 22 }
|
|
|
|
rcIpv6FhsSnoopNotificationEntryType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static (1),
|
|
dynamic (2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This value indicates type of binding entry. static (1)
|
|
entries are created by administrator manually whereas
|
|
dynamic (2) entries are learnt through snooping."
|
|
::= { rcIpv6FhsSnoopNotificationObjects 1 }
|
|
|
|
rcIpv6FhsSnoopNotificationEntryCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This value indicates current number of binding entries of type
|
|
rcIpv6FhsSnoopingNotificationEntryType"
|
|
::= { rcIpv6FhsSnoopNotificationObjects 2 }
|
|
|
|
--
|
|
-- Vxlan objects
|
|
--
|
|
rcVxlanVtepSourceIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vxlan tunnel end point source IP address."
|
|
::= { rcVxlan 1}
|
|
|
|
rcVxlanVtepVrf OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Vrf associated with vtep source IP"
|
|
::= {rcVxlan 2}
|
|
|
|
rcVxlanVtepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVxlanVtepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table for vxlan tunnel end point."
|
|
::= { rcVxlan 3 }
|
|
|
|
rcVxlanVtepEntry OBJECT-TYPE
|
|
SYNTAX RcVxlanVtepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry contains the configuration information about the vxlan tunnel end point"
|
|
INDEX { rcVxlanVtepId }
|
|
::= { rcVxlanVtepTable 1 }
|
|
|
|
RcVxlanVtepEntry ::= SEQUENCE {
|
|
rcVxlanVtepId Integer32,
|
|
rcVxlanVtepIpAddr IpAddress,
|
|
rcVxlanVtepName DisplayString,
|
|
rcVxlanVtepRowStatus RowStatus,
|
|
rcVxlanVtepNextHopVrfName SnmpAdminString
|
|
}
|
|
rcVxlanVtepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..500)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index used to uniquely identify this vxlan tunnel end point."
|
|
::= { rcVxlanVtepEntry 1 }
|
|
|
|
rcVxlanVtepIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the destination
|
|
IP address of vtep tunnel"
|
|
::= { rcVxlanVtepEntry 2}
|
|
|
|
rcVxlanVtepName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this vxlan tunnel end point.
|
|
By default name will be VTEP-<#ID>-<IP address> "
|
|
::= { rcVxlanVtepEntry 3 }
|
|
|
|
rcVxlanVtepRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete vxlan tunnel end point"
|
|
::= { rcVxlanVtepEntry 4}
|
|
|
|
rcVxlanVtepNextHopVrfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop vrf name to reach remote vtep"
|
|
::= { rcVxlanVtepEntry 5 }
|
|
|
|
rcVxlanVnidTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVxlanVnidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A Vxlan vnid table."
|
|
::= { rcVxlan 4}
|
|
|
|
rcVxlanVnidEntry OBJECT-TYPE
|
|
SYNTAX RcVxlanVnidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing vnid and i-sid information for a
|
|
particular vxlan tunnel end point."
|
|
INDEX { rcVxlanVnidIdentifier }
|
|
::= { rcVxlanVnidTable 1 }
|
|
|
|
RcVxlanVnidEntry ::= SEQUENCE {
|
|
rcVxlanVnidIdentifier Integer32,
|
|
rcVxlanVnidIsid Integer32,
|
|
rcVxlanVnidRowStatus RowStatus,
|
|
rcVxlanVnidAction INTEGER
|
|
}
|
|
|
|
rcVxlanVnidIdentifier OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the vnid
|
|
of this vxlan tunnel end point."
|
|
::= { rcVxlanVnidEntry 1 }
|
|
|
|
rcVxlanVnidIsid OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the i-sid
|
|
of this Vxlan end point."
|
|
::= { rcVxlanVnidEntry 2 }
|
|
|
|
rcVxlanVnidRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete. "
|
|
::= { rcVxlanVnidEntry 3}
|
|
|
|
rcVxlanVnidAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
flushMacFdb(2), -- flush MAC forwarding table
|
|
syncMacFdb(3) -- sync MAC forwarding table
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Vnid related actions."
|
|
DEFVAL { none }
|
|
::= { rcVxlanVnidEntry 4}
|
|
|
|
rcVxlanVnidEndPointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVxlanVnidEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Attributes of vnid table at vxlan tunnel end point."
|
|
::= { rcVxlan 5 }
|
|
|
|
rcVxlanVnidEndPointEntry OBJECT-TYPE
|
|
SYNTAX RcVxlanVnidEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular vnid at vxlan tunnel end point."
|
|
INDEX { rcVxlanVnidEndPointVnid,
|
|
rcVxlanVnidEndPointVtepId
|
|
}
|
|
::= { rcVxlanVnidEndPointTable 1 }
|
|
|
|
RcVxlanVnidEndPointEntry ::= SEQUENCE {
|
|
rcVxlanVnidEndPointVnid Integer32,
|
|
rcVxlanVnidEndPointVtepId Integer32,
|
|
rcVxlanVnidEndPointIsid Integer32,
|
|
rcVxlanVnidEndPointRowStatus RowStatus
|
|
}
|
|
|
|
rcVxlanVnidEndPointVnid OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the vnid
|
|
of this vxlan tunnel end point."
|
|
::= { rcVxlanVnidEndPointEntry 1 }
|
|
|
|
rcVxlanVnidEndPointVtepId OBJECT-TYPE
|
|
SYNTAX Integer32(1..500)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "vxlan tunnel end point id associated with given vnid "
|
|
::= { rcVxlanVnidEndPointEntry 2}
|
|
|
|
rcVxlanVnidEndPointIsid OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the i-sid
|
|
of this vxlan tunnel end point."
|
|
::= { rcVxlanVnidEndPointEntry 3 }
|
|
|
|
rcVxlanVnidEndPointRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete. "
|
|
::= { rcVxlanVnidEndPointEntry 4}
|
|
|
|
rcVxlanVnidElanEndPointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVxlanVnidElanEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of elan end point entries."
|
|
::= { rcVxlan 7 }
|
|
|
|
rcVxlanVnidElanEndPointEntry OBJECT-TYPE
|
|
SYNTAX RcVxlanVnidElanEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular elan end point."
|
|
INDEX { rcVxlanVnidElanEndPointVnid,
|
|
rcVxlanVnidElanEndPointCvid,
|
|
rcVxlanVnidElanEndPointIfIndex}
|
|
::= { rcVxlanVnidElanEndPointTable 1 }
|
|
|
|
RcVxlanVnidElanEndPointEntry ::= SEQUENCE {
|
|
rcVxlanVnidElanEndPointVnid Integer32,
|
|
rcVxlanVnidElanEndPointCvid Integer32,
|
|
rcVxlanVnidElanEndPointIfIndex InterfaceIndex,
|
|
rcVxlanVnidElanEndPointIsid Integer32,
|
|
rcVxlanVnidElanEndPointRowStatus RowStatus
|
|
}
|
|
|
|
rcVxlanVnidElanEndPointVnid OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the vnid
|
|
of this elan end point."
|
|
::= { rcVxlanVnidElanEndPointEntry 1 }
|
|
|
|
rcVxlanVnidElanEndPointCvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the customer vid
|
|
of this elan end point. 4095 is not used. 4096 is reserved for
|
|
untagged case"
|
|
::= { rcVxlanVnidElanEndPointEntry 2 }
|
|
|
|
rcVxlanVnidElanEndPointIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface index for mlt or port of this elan end point."
|
|
::= { rcVxlanVnidElanEndPointEntry 3 }
|
|
|
|
rcVxlanVnidElanEndPointIsid OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A i-sid value associated with vnid"
|
|
::= { rcVxlanVnidElanEndPointEntry 4 }
|
|
|
|
|
|
rcVxlanVnidElanEndPointRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete elan end point under vnid "
|
|
::= { rcVxlanVnidElanEndPointEntry 5}
|
|
|
|
rcVxlanVtepNextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVxlanVtepNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table to store nexthop information for the remote vtep"
|
|
::= { rcVxlan 6 }
|
|
|
|
rcVxlanVtepNextHopEntry OBJECT-TYPE
|
|
SYNTAX RcVxlanVtepNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry contains the nexthop information for the remote vtep"
|
|
INDEX { rcVxlanVtepNextHopVtepId,
|
|
rcVxlanVtepNextHopIp
|
|
}
|
|
::= { rcVxlanVtepNextHopTable 1 }
|
|
|
|
RcVxlanVtepNextHopEntry ::= SEQUENCE {
|
|
rcVxlanVtepNextHopVtepId Integer32,
|
|
rcVxlanVtepNextHopIp IpAddress,
|
|
rcVxlanVtepNextHopIfIndex InterfaceIndex,
|
|
rcVxlanVtepNextHopVid Integer32
|
|
}
|
|
rcVxlanVtepNextHopVtepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..500)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index used to uniquely identify the remote vtep.This value is same as the vtep identifier in the rcVxlanVtepTable"
|
|
::= { rcVxlanVtepNextHopEntry 1 }
|
|
|
|
|
|
rcVxlanVtepNextHopIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index that uniquely identifies the next hop
|
|
IP address of the remote vtep"
|
|
::= { rcVxlanVtepNextHopEntry 2}
|
|
|
|
|
|
rcVxlanVtepNextHopIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop destination ifindex to reach the remote vtep"
|
|
::= { rcVxlanVtepNextHopEntry 3 }
|
|
|
|
rcVxlanVtepNextHopVid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop vlan id to reach the remote vtep"
|
|
::= { rcVxlanVtepNextHopEntry 4}
|
|
|
|
|
|
|
|
--
|
|
-- SFLOW
|
|
--
|
|
rcSflowMib OBJECT IDENTIFIER ::= { rcSflow 1 }
|
|
rcSflowObjects OBJECT IDENTIFIER ::= { rcSflowMib 1 }
|
|
|
|
rcSflowScalars OBJECT IDENTIFIER ::= { rcSflowObjects 1 }
|
|
|
|
rcSflowAdminEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Globally enables or disables sflow."
|
|
::= { rcSflowScalars 1 }
|
|
|
|
rcSflowAgentAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The address type of the address associated with sflow agent."
|
|
::= { rcSflowScalars 2 }
|
|
|
|
rcSflowAgentAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address associated with sflow agent."
|
|
::= { rcSflowScalars 3 }
|
|
|
|
rcSflowStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSflowStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to show/clear sflow statistics."
|
|
::= { rcSflowObjects 2 }
|
|
|
|
rcSflowStatsEntry OBJECT-TYPE
|
|
SYNTAX RcSflowStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing sflow stats information."
|
|
INDEX { rcSflowStatsIndex }
|
|
::= { rcSflowStatsTable 1 }
|
|
|
|
RcSflowStatsEntry ::=
|
|
SEQUENCE {
|
|
rcSflowStatsIndex Integer32,
|
|
rcSflowStatsDatagramCount Counter64,
|
|
rcSflowStatsClearStats TruthValue
|
|
}
|
|
|
|
rcSflowStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "sflow Collector id."
|
|
::= { rcSflowStatsEntry 1 }
|
|
|
|
rcSflowStatsDatagramCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of datagrams sent to collector."
|
|
::= { rcSflowStatsEntry 2 }
|
|
|
|
rcSflowStatsClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to clear the sflow statistics."
|
|
DEFVAL { false }
|
|
::= { rcSflowStatsEntry 3 }
|
|
|
|
-- LLDP enable config
|
|
rcLldpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the LLDP protocols.
|
|
It is used to enable/disable LLDP protocol."
|
|
DEFVAL { false }
|
|
::= { rcLldp 1 }
|
|
|
|
-- End of LLDP enable config
|
|
|
|
|
|
--
|
|
-- *** THIS SECTION IS GENERATED FROM ../mib_tools/error.mib ***
|
|
|
|
-- This is generated by str2c.py -mib
|
|
-- Do not edit this file
|
|
-- Instead, edit $(TOPDIR)/mib/mib_tools/error_input.txt
|
|
|
|
rcErrorReturnCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
|
|
none(100),
|
|
resourceNotAvailable(101),
|
|
operationNotAllowed(102),
|
|
operationInProgress(103),
|
|
invalidPortNumber(104),
|
|
invalidSubnetAddress(105),
|
|
invalidSubnetMask(106),
|
|
invalidVlanId(107),
|
|
invalidVlanName(108),
|
|
invalidVlanType(109),
|
|
invalidStgId(110),
|
|
invalidProtocolId(111),
|
|
invalidPortMembers(112),
|
|
invalidStaticMembers(113),
|
|
invalidNotAllowedMembers(114),
|
|
destinationNotReachable(115),
|
|
tableIsFull(116),
|
|
nondualConnectorGigPort(117),
|
|
testIdNotPresent(118),
|
|
invalidTestId(119),
|
|
invalidStatusChange(120),
|
|
invalidCpuCard(121),
|
|
invalidSrcPortChoice(122),
|
|
dstPortUnspecified(123),
|
|
srcPortOneUnspecified(124),
|
|
srcPortTwoUnspecified(125),
|
|
notSupported(126),
|
|
userNameIsNonUnique(127),
|
|
invalidName(128),
|
|
unknownErrorCode1(129),
|
|
cannotModifyThisField(130),
|
|
invalidUserPasswordLength(131),
|
|
thisUsernameExists(132),
|
|
invalidIpAddress(133),
|
|
invalidMacAddress(134),
|
|
nosuchEntry(135),
|
|
anotherLoopBackTestAlreadyRunning(136),
|
|
protocolIdNotRoutable(137),
|
|
autoNegotiateIsOn(138),
|
|
noActionSpecified(139),
|
|
invalidActionSpecified(140),
|
|
cannotModifyAutoNegotiateIsOn(141),
|
|
cannotModifyAutoPortIsFiber(142),
|
|
autoNegotiationNotSupported(143),
|
|
cannotSetAdminSpeed(144),
|
|
cannotSetAdminDuplex(145),
|
|
ospfRtrDeadIntIsnotMultOfHelloInt(146),
|
|
ospfRtrDeadIntLessThan4TimesHelloInt(147),
|
|
notUsed1(148),
|
|
ospfBadAuthValue(149),
|
|
ospfEnabled(150),
|
|
ospfAreaNotFound(151),
|
|
ospfBackboneArea(152),
|
|
notInTestMode(153),
|
|
ospfInvalidAreaRangeMask(154),
|
|
ospfDuplicateEntry(155),
|
|
ospfRangeNotAllocated(156),
|
|
ospfAreaRangeNotFound(157),
|
|
testRunning(158),
|
|
nvramLimitExceeded(159),
|
|
flowAlreadyExist(160),
|
|
flowNotFound(161),
|
|
invalidOspfAreaRangeNet(162),
|
|
duplicateIpAddress(163),
|
|
conflictingIpAddress(164),
|
|
invalidRouteCost(165),
|
|
invalidNextHop(166),
|
|
duplicateRoute(167),
|
|
cannotFindRoute(168),
|
|
cannotDeleteLocalRoute(169),
|
|
badDhcpMinSec(170),
|
|
badDhcpMaxHop(171),
|
|
badDhcpMode(172),
|
|
badAgentAddress(173),
|
|
dhcpNotEnabled(174),
|
|
dhcpForwardNotFound(175),
|
|
dhcpDuplicateForward(176),
|
|
dhcpMaxForward(177),
|
|
dhcpBadEnable(178),
|
|
invalidDeviceFileNumber(179),
|
|
notExecutableDeviceFile(180),
|
|
deletedDeviceFile(181),
|
|
pcmciaNotPresent(182),
|
|
pcmciaWriteProtected(183),
|
|
discontiguousSubnetMask(184),
|
|
invalidOspfMetric(185),
|
|
ospfHostRouteNotFound(186),
|
|
invalidMltId(187),
|
|
invalidMltName(188),
|
|
onlyOnePortInMlt(189),
|
|
moreThan4PortsInMlt(190),
|
|
portsInDifferentQuid(191),
|
|
portAlreadyInAnotherMlt(192),
|
|
invalidVlan(193),
|
|
nonExistIpMcastAddriess(194),
|
|
invalidIpMulticastAddress(195),
|
|
portIsLocked(196),
|
|
accessRestriction(197),
|
|
invalidDeviceFileLength(198),
|
|
duplicateAccessPolicyId(199),
|
|
noDesiredAccessPolicyItem(200),
|
|
ipfFilterNonExist(201),
|
|
ipfInvalidVlanPriority(202),
|
|
ipfInvalidDestinationAddress(203),
|
|
ipfInvalidSourceAddress(204),
|
|
ipfFilterDuplicate(205),
|
|
ipfGlobalListDuplicate(206),
|
|
ipfGlobalListNonExist(207),
|
|
ipfBaseListDuplicate(208),
|
|
ipfBaseListNonExist(209),
|
|
ipfPortDuplicate(210),
|
|
ipfPortNonExist(211),
|
|
ipfListNonExist(212),
|
|
snmpSnoopDisabled(213),
|
|
invalidHostIpAddress(214),
|
|
snoopStaticGroupExist(215),
|
|
ripAnnouncePolicyNotFound(216),
|
|
duplicateRipAnnouncePolicy(217),
|
|
ospfAnnouncePolicyNotFound(218),
|
|
duplicateOspfAnnouncePolicy(219),
|
|
policyMatchNetEntryNotFound(220),
|
|
duplicatePolicyNetEntry(221),
|
|
policyAddrListEntryNotFound(222),
|
|
duplicatePolicyAddrListEntry(223),
|
|
policyAddrListIdNotFound(224),
|
|
policyExactNetListNotFound(225),
|
|
policyRangeNetListNotFound(226),
|
|
policyRipGatewayListNotFound(227),
|
|
policyRipInterfaceListNotFound(228),
|
|
policyOspfRtrIdListNotFound(229),
|
|
policyAnnounceInterfaceListNotFound(230),
|
|
policyAdvertiseNetListNotFound(231),
|
|
policyInjectNetListNotFound(232),
|
|
invalidPolicyListIdListSize(233),
|
|
policyAddrEntryNotFound(234),
|
|
duplicatePolicyAddrEntry(235),
|
|
disableThisPortFirst(236),
|
|
mutinettingNotSupported(237),
|
|
addingGlobalFilterToNonGlobalList(238),
|
|
addingNonGlobalFilterToGlobalList(239),
|
|
setFilteredPortMode(240),
|
|
setFilteredPortEnableValue(241),
|
|
invalidModeType(242),
|
|
duplicateRipAcceptPolicy(243),
|
|
ripAccepPolicyNotFound(244),
|
|
duplicateOspfAcceptPolicy(245),
|
|
ospfAccepPolicyNotFound(246),
|
|
invalidAccessPolicyName(247),
|
|
invalidAccessPolicyPolicyEnable(248),
|
|
invalidAccessPolicyMode(249),
|
|
invalidAccessPolicyService(250),
|
|
invalidAccessPolicyPrecedence(251),
|
|
invalidAccessPolicyNetAddress(252),
|
|
invalidAccessPolicyTrustedHostAddress(253),
|
|
invalidAccessPolicyTrustedHostUserName(254),
|
|
invalidAccessPolicyAccessLevel(255),
|
|
invalidAccessPolicyLogSetting(256),
|
|
invalidAccessPolicyPolicyId(257),
|
|
invalidAreaOptions(258),
|
|
cannotDeleteAreaIfCountIsNotZero(259),
|
|
ospfInterfaceNotFound(260),
|
|
ospfIfAreaIdConflictsWithConfiguredAreaRange(261),
|
|
applyingDuplicateGlobalFilterToPort(262),
|
|
differentMltPortTypes(263),
|
|
addPortToMltFailed(264),
|
|
removePortFromMltFailed(265),
|
|
mirrorPortInMlt(266),
|
|
invalidDhcpAlwaysBroadcast(267),
|
|
interfaceIsSetToTransmitRipV1(268),
|
|
ripInterfaceDoesnotExist(269),
|
|
interfaceIsNotRunningRip(270),
|
|
cannotCreateVirtLinksThroughStubArea(271),
|
|
invalidSyslogEnableSetting(272),
|
|
invalidSyslogMaxHostsSettings(273),
|
|
invalidSyslogHostIpAddr(274),
|
|
invalidSyslogHostUdpPort(275),
|
|
invalidSyslogHostFacility(276),
|
|
invalidSyslogModuleId(277),
|
|
invalidSyslogSeverity(278),
|
|
invalidSyslogMapInfoSeverity(279),
|
|
invalidSyslogMapWarningSeverity(280),
|
|
invalidSyslogMapErrorSeverity(281),
|
|
invalidSyslogMapMfgSeverity(282),
|
|
invalidSyslogMapFatalSeverity(283),
|
|
invalidSyslogMapTraceMsgSetting(284),
|
|
invalidSyslogMapTrapMsgSetting(285),
|
|
invalidSyslogLogTraceMsgSetting(286),
|
|
invalidSyslogLogTrapMsgSetting(287),
|
|
invalidSyslogEntryEnableSetting(288),
|
|
invalidSyslogMaxHostSetting(289),
|
|
invalidSyslogHostId(290),
|
|
duplicateSyslogEntry(291),
|
|
syslogHostTableIsFull(292),
|
|
noDesiredSyslogHostEntryFound(293),
|
|
invalidHoldDownTime(294),
|
|
incompatibleAruHardware(295),
|
|
invalidVrid(296),
|
|
duplicateVrrpEntry(297),
|
|
noVrrpIpAddressSpecified(298),
|
|
invalidVrrpControlValue(299),
|
|
invalidVrrpPriority(300),
|
|
invalidVrrpAdvertisementInterval(301),
|
|
maxNumOfVrrpsEntriesExceeded(302),
|
|
policyNetListEntryNotFound(303),
|
|
duplicatePolicyNetListEntry(304),
|
|
policyNetListIdNotFound(305),
|
|
filterOnAnEnabledPort(306),
|
|
listOnAnEnabledPort(307),
|
|
invalidIpFilterSrcOption(308),
|
|
invalidIpFilterDstOption(309),
|
|
invalidOspfAreaImportextOption(310),
|
|
invalidOspfInterfaceMd5KeyIdLength(311),
|
|
invalidOspfInterfaceMd5KeyLength(312),
|
|
invalidIPXNetworkNumber(313),
|
|
ipxCircuitAlreadyExists(314),
|
|
ipxCircuitDoesNotExist(315),
|
|
encapsulationIsNotAllowedOnSameSegment(316),
|
|
encapsulationDoesNotMatchProtocolBasedVLAN(317),
|
|
invalidDvmrpIfTblEnableValue(318),
|
|
invalidDvmrpIfTblMetricValue(319),
|
|
ipHostPartForSubnetAddrIsNonZero(320),
|
|
globalMulticastNotEnabled(321),
|
|
metricFieldIsCreatedButModified(322),
|
|
invalidIpMRouteInterfaceTblTtlValue(323),
|
|
invalidUdpPortNumber(324),
|
|
invalidUdpProtocolNameLength(325),
|
|
cannotModifyUdpProtocolName(326),
|
|
udpProtocolEntryDoesnotexists(327),
|
|
duplicateUdpProtocolEntry(328),
|
|
cannotDelUdpProtocolEntryFwdEntriesExists(329),
|
|
udpBroadcastIntfEntryDoesnotExists(330),
|
|
duplicateUdpBroadcastIntfEntry(331),
|
|
invalidUdpConfBroacastInterface(332),
|
|
updConfIntfEntryNotEnabledForUdpBcastForwarding(333),
|
|
udpPortFwdEntryDoesnotExists(334),
|
|
duplicateUdpPortFwdEntryDoesnotExists(335),
|
|
udpPortFwdEntryUdpPortInterfaceDoesnotExists(336),
|
|
udpPortFwdListEntryDoesnotExists(337),
|
|
duplicateUdpPortFwdListEntryDoesnotExists(338),
|
|
udpPortFwdListEntryPortFwdIdDoesnotExists(339),
|
|
udpPortFwdListEntryinvalidFwdIdListSize(340),
|
|
cannotDeleteUdpPortFwdListEntryInterfaceUsingThisList(341),
|
|
invalidIgmpSnoopDestAddress(342),
|
|
invalidIgmpSnoopHostAddress(343),
|
|
cannotDeleteDefaultUdpProtocolTblEntry(344),
|
|
nextHopRouteIsStaticRoute(345),
|
|
invalidUpdateIntervalValueInDVMRPGlobalTable(346),
|
|
invalidTriggeredUpdateIntervalValueInDVMRPGlobalTable(347),
|
|
invalidLeafTimeoutValueInDVMRPGlobalTable(348),
|
|
invalidNbrTimeoutValueInDVMRPGlobalTable(349),
|
|
invalidNbrProbeIntervalValueInDVMRPGlobalTable(350),
|
|
invalidQueryIntervalValueInIgmpInterfaceTable(351),
|
|
invalidVersionValueInIgmpInterfaceTable(352),
|
|
invalidQueryMaxResponseTimeValueInIgmpInterfaceTable(353),
|
|
invalidRobustnessValueInIgmpInterfaceTable(354),
|
|
invalidLastMembQueryIntvlValueInIgmpInterfaceTable(355),
|
|
invalidANDMaskInRcIpTosRuleGroup(356),
|
|
invalidORRule1InRcIpTosRuleGroup(357),
|
|
invalidORRule2InRcIpTosRuleGroup(358),
|
|
invalidORRule3InRcIpTosRuleGroup(359),
|
|
deleteStaticPortNotValid(360),
|
|
maxEntriesForIgmpAccTbl(361),
|
|
maxMaskNumberOfHostIgmpAccTbl(362),
|
|
dvmrpIgmpExclusive(363),
|
|
theSpecifiedAreaRangeMaskIsInvalid(364),
|
|
invalidLengthOf2kBootConfigImageSource(365),
|
|
invalidLengthOf2kBootConfigSource(366),
|
|
preferenceOfStaticRouteIsInvalid(367),
|
|
copyFileOutOfSpace(368),
|
|
copyFileFileNotFound(369),
|
|
copyFileInvalidDestination(370),
|
|
copyFileInvalidSource(371),
|
|
copyFileFail(372),
|
|
invalidLinkFlapDetectAutoPortDown(373),
|
|
invalidLinkFlapDetectFrequency(374),
|
|
invalidLinkFlapDetectInterval(375),
|
|
invalidLinkFlapDetectSendTrap(376),
|
|
invalidQosLevel(377),
|
|
invalidQosWeight(378),
|
|
invalidQosThreshold(379),
|
|
invalidTagToQosTableIeee1pValue(380),
|
|
invalidTagToQosTableQosLevel(381),
|
|
invalidDsFieldToQosTableDsField(382),
|
|
invalidDsFieldToQosTableQosLevel(383),
|
|
invalidQosToTagTableQosLevel(384),
|
|
invalidQosToTagTableIeee1pValue(385),
|
|
invalidQosLevelValue(386),
|
|
invalidQosToDsFieldTableDsFieldValue(387),
|
|
invalidQosToDsFieldTableQosLevel(388),
|
|
invalidDiffServEnable(389),
|
|
invalidDiffServType(390),
|
|
invalidIeeeOverride(391),
|
|
invalidVlanQosValue(392),
|
|
invalidVlanTosValue(393),
|
|
operationNotAllowedOnAccessPort(394),
|
|
operationNotAllowedOnTaggingPort(395),
|
|
invalidFileName(396),
|
|
invalidDiaglogueDuplicateMirroredPort(397),
|
|
invalidDiaglogueEnableValue(398),
|
|
invalidDiaglogueEnableSetting(399),
|
|
invalidDiaglogueModeSetting(400),
|
|
invalidDiaglogueEntryId(401),
|
|
srcMacVlanIsNotYetEnabled(402),
|
|
srcMacVlanIsNotYetDisabled(403),
|
|
invalidDiaglogueOperation(404),
|
|
invalidMacAddressSpecied(405),
|
|
maxResponseTimeGreaterThanQueryInterval(406),
|
|
noModifyDsFltrAllowedOnDiffSrvCorePort(407),
|
|
mltMoreThan4PortsInMgMlt(408),
|
|
protocolRulesForThePortHasExceeded16(409),
|
|
routeDoesNotExistsInTheRroutingTable(410),
|
|
diagMirrorByPortTableAccessError(411),
|
|
diagMirrorByPortInvalidMirroringPortSetting(412),
|
|
igmpAdminVersionConfiguredLessThanOperatingVersion(413),
|
|
canOnlyConfigureViaMltTable(414),
|
|
dvmrpInterfaceTableIsFull(415),
|
|
invalidDscpField(416),
|
|
invalidDscpReservedField(417),
|
|
disablePortPriorToChangingDiffServPortType(418),
|
|
ipFilterInvalidId(419),
|
|
rateLimitingExceeded(420),
|
|
diagEntryMaxExceeded(421),
|
|
onlyOneMirroringPortAllow(422),
|
|
radiusServerExist(423),
|
|
radiusServerNotExist(424),
|
|
radiusServerInUse(425),
|
|
radiusMaxServerNumExceeded(426),
|
|
radiusInvalidAttribute(427),
|
|
canNotChangeLocking(428),
|
|
activationDisabled(429),
|
|
zeroMac(430),
|
|
atmBadVpi(431),
|
|
atmBadVci(432),
|
|
atmBadFramingMode(433),
|
|
atmDestroyPvcFailed(434),
|
|
atmBadName(435),
|
|
atmBadEnable(436),
|
|
atmBadpvcEncapsulation(437),
|
|
atmBadPvdServiceType(438),
|
|
atmBadPeakCellRate(439),
|
|
atmBadSustainedCellRate(440),
|
|
atmBadMaxBurstSize(441),
|
|
atmBadMaxMtuSize(442),
|
|
atmBadElanId(443),
|
|
atmUnknownOperation(444),
|
|
atmDestroy1483ElanFailed(445),
|
|
atmBadPerformTagging(446),
|
|
atmIlleagalElanDefinition(447),
|
|
atmCreate1483ElanFailed(448),
|
|
atmBadSnmpMessage(449),
|
|
atmBadScrambleEnable(450),
|
|
atmBadSignalingEnable(451),
|
|
atmBadClockSource(452),
|
|
atmBadLoopback(453),
|
|
badRowStatus(454),
|
|
atmBadLaneConfigMode(455),
|
|
atmLecCreationFailed(456),
|
|
atmBad1438Inarp(457),
|
|
atmF5StartFailed(458),
|
|
atmBadPvcId(459),
|
|
atmBadConnectType(460),
|
|
atmBadIpxEncapMethod(461),
|
|
atmBadUniVersion(462),
|
|
atmCreatePvcFailed(463),
|
|
invalidLoginPromptLength(464),
|
|
invalidPasswordPromptLength(465),
|
|
invalidCliBannerLength(466),
|
|
invalidCliBannerSize(467),
|
|
invalidCliMotdLength(468),
|
|
invalidCliMotdSize(469),
|
|
invalidPortNameLength(470),
|
|
invalidPortName(471),
|
|
invalidMaxAdvertiseInterval(472),
|
|
invalidMinAdvertiseInterval(473),
|
|
invalidMaxInitialAdvertiseInterval(474),
|
|
invalidMaxInitalAdvertments(475),
|
|
invalidNeigborDeadInterval(476),
|
|
invalidUserSetTimeYearValue(477),
|
|
invalidUserSetTimeMonthValue(478),
|
|
invalidUserSetTimeDateValue(479),
|
|
invalidUserSetTimeHourValue(480),
|
|
invalidUserSetTimeMinuteValue(481),
|
|
invalidUserSetTimeSecondValue(482),
|
|
rtcIsNotPresent(483),
|
|
rtcIsNotRunning(484),
|
|
maxMacCount(485),
|
|
maxAdvertiseIntLessThanMinAdvertiseInt(486),
|
|
minAdvertiseIntGreaterThanMaxAdvertiseInt(487),
|
|
dvmrpNotEnabledGlobally(488),
|
|
vrrpCriticalIpAddrNotEnable(489),
|
|
vrrpInvalidCriticalIpAddr(490),
|
|
metricConfigNotAllowed(491),
|
|
posActiveNonBcpEnabledPort(492),
|
|
posVlanNoMorePorts(493),
|
|
posPortCanBeAdded(494),
|
|
posNonBcpCanNotBeEnabled(495),
|
|
posImageFilenameTooLong(496),
|
|
posNoIpcpEnableOnMltPorts(497),
|
|
posNoIpcpEnableOnTagPort(498),
|
|
posNoIpxcpEnableOnMltPort(499),
|
|
posNoIpxcpEnableOnTagPort(500),
|
|
posDisableTagBeforeBcpDisable(501),
|
|
posAssignIpBeforeIpcpEnable(502),
|
|
posAssignIpxBeforeIpxcpEnable(503),
|
|
posAssignIpBeforeRemoteIp(504),
|
|
posKeepRemoteIpInSameSubnet(505),
|
|
staticRouteEnabled(506),
|
|
cannotChangeAutoLearnState(507),
|
|
invalidVirtualIpAddr(508),
|
|
virtualAndPhysicalIpNotInSameSubnet(509),
|
|
vidNotAvailable(510),
|
|
mgidNotAvailable(511),
|
|
posNoIpcpEnableOnPolicyVlanPort(512),
|
|
posNoIpxcpEnableOnPolicyVlanPort(513),
|
|
posVrrpNotAllowed(514),
|
|
webInvalidHttpPort(515),
|
|
cannotAddMulticastStaticMac(516),
|
|
posNoStpEnableWithBCPClosed(517),
|
|
posAtmNoRip1(518),
|
|
ipfFilterNumOverFilterSetLimit(519),
|
|
ipfQosTrafficAverageRateOverLimit(520),
|
|
ipfQosTrafficProfileNotExist(521),
|
|
atmNoIpIpxConfigOnVlan(522),
|
|
atmPvcIsInUse(523),
|
|
globalFilterNotDisabled(524),
|
|
dhcpNotOnByIpSubnetVlan(525),
|
|
cannotConfigureDefaultGateway(526),
|
|
routeExists(527),
|
|
gatewayNotOnMgmtInterfaceSubnet(528),
|
|
mgmtRouteTableFull(529),
|
|
routeNotExists(530),
|
|
invalidMacOffsetRangeForBW(531),
|
|
invalidMacOffsetRangeForMG(532),
|
|
atmPvcBadPeakCellRate(533),
|
|
atmPvcBadSustainedCellRate(534),
|
|
qosReservedQosLevel(535),
|
|
dvmrpGlobInvalidFwdCacheTimeOut(536),
|
|
dvmrpGlobInvalidRouteExpireTimeOut(537),
|
|
dvmrpGlobInvalidRouteDiscardTimeOut(538),
|
|
dvmrpGlobInvalidRouteSwitchTimeOut(539),
|
|
pimCondRPGroupExists(540),
|
|
pimCandRPAddressInvalid(541),
|
|
pimGroupAddressInvalid(542),
|
|
pimNotEnabled(543),
|
|
pimInvalidJPInterval(544),
|
|
pimInvalidMode(545),
|
|
pimInvalidHelloInt(546),
|
|
pimInvalidCBSRPRef(547),
|
|
pimInvalidEnable(548),
|
|
pimAlreadyEnabled(549),
|
|
ipDvmrpAlreadyEnabled(550),
|
|
ospfIntfChangeNotAllowedWhenEnabled(551),
|
|
ospfIntfChangeFromNBMANotAllowed(552),
|
|
ospfPollIntIsnotMultOfHelloInt(553),
|
|
ospfNeigNoCircuit(554),
|
|
ospfNeigSameIp(555),
|
|
ospfCircNotNBMA(556),
|
|
ospfCircPriZero(557),
|
|
ospfNBMANeigExist(558),
|
|
ospfNBMANeigNotFound(559),
|
|
ospfDynNeigExist(560),
|
|
pgmInvalidSessionLifetime(561),
|
|
pgmInvalidMaxRetxStates(562),
|
|
pgmInvalidMaxSessions(563),
|
|
pgmInvalidIfNakRetxInterval(564),
|
|
pgmInvalidIfMaxNakRetxCnt(565),
|
|
pgmInvalidIfNakRdataInt(566),
|
|
pgmInvalidIfNakElimInt(567),
|
|
maxOfMirroringPortAllowedExceed(568),
|
|
duplicatedRoutePolicyEntry(569),
|
|
specifiedRoutePolicyEntryNotFound(570),
|
|
specifiedPrefixListNotFound(571),
|
|
routePolicyListNotSpecify(572),
|
|
routePolicyPrefixListOverLimit(573),
|
|
ipPrefixListDuplicate(574),
|
|
ipPrefixListDuplicateEntry(575),
|
|
ipPrefixListEntryNotFound(576),
|
|
ipPrefixListInvalidName(577),
|
|
ipRedistributeDuplicateEntry(578),
|
|
ipRedistributeEntryNotFound(579),
|
|
ipOspfInFilterDuplicateEntry(580),
|
|
ipOspfInFilterEntryNotFound(581),
|
|
ipEcmpNotDisabled(582),
|
|
ipEcmpMaxExceeded(583),
|
|
ipfQosTrafficAvgRateZeroProfileEnable(584),
|
|
ipmTimePruneEntryInvalidGroup(585),
|
|
ipmTimePruneEntryDuplicate(586),
|
|
ipmTimePruneEntryNotExist(587),
|
|
ipmTimePruneEntryInvalidExpireTime(588),
|
|
smltIstExist(589),
|
|
smltSmltIdExist(590),
|
|
smltIstNotExist(591),
|
|
smltSmltIsEnabled(592),
|
|
smltSmltLocalIpNotExist(593),
|
|
smltInvalidPortTypeForIstMlt(594),
|
|
ntpServerAlreadyExist(595),
|
|
ntpServerDoesNotExist(596),
|
|
ntpKeyAlreadyExists(597),
|
|
ntpKeyDoesNotExist(598),
|
|
ntpMaxKeyExceeded(599),
|
|
ntpServerAlreadyEnabled(600),
|
|
ntpServerAlreadyDisabled(601),
|
|
ntpNoServerConfigured(602),
|
|
ntpMaxServerNumExceeded(603),
|
|
ntpInvalidIntervalValue(604),
|
|
ecmpNotEnabled(605),
|
|
ipfInvalidProtocolType(606),
|
|
assignIpToPortInRouteVlan(607),
|
|
assignIpToVlanWithRoutePortMember(608),
|
|
ipfIstPort(609),
|
|
smltMltIpfExist(610),
|
|
smltMltPortIpfExist(611),
|
|
smltL2fIstPort(612),
|
|
smltMltL2fExist(613),
|
|
smltMltPortL2fExist(614),
|
|
portMirroringEgressNotSupportFullDuplexMode(615),
|
|
pimGlobInvalidRegSupprTimeOut(616),
|
|
smltNotAvailableIn8100(617),
|
|
mltNoPort(618),
|
|
mltInvalidPortType(619),
|
|
inUsedByATM1483Elan(620),
|
|
smltIstStpEnableNotAllowed(621),
|
|
invalidHighestVrrpPrio(622),
|
|
dynamicPortMemberIn8100IsNotAllowed(623),
|
|
ipfGlobalNextHopModeNotSupported(624),
|
|
smltPeerIpNotExist(625),
|
|
smltMltNoThisVlan(626),
|
|
smltNotANormalMlt(627),
|
|
validStaticRtExist(628),
|
|
validBlkHolRtExist(629),
|
|
pimOrIgmpAlreadyEnabled(630),
|
|
routePolicyOverSystemLimit(631),
|
|
routePolicyOverVrfLimit(632),
|
|
ipInterfaceNotExist(635),
|
|
eapolEnabledPortsCannotBeAddedToMlt(8005),
|
|
eapolNotAllowedOnMltPorts(8006),
|
|
cannotConfigureLacpOnEapolEnabledPorts(8007),
|
|
nonEapolPasswordFormatCannotBeEmpty(8008),
|
|
multiHostMacMaxCannotBeChangedOnEapolEnabledPorts(8009),
|
|
eapolNotAllowedOnVlacpEnabledPorts(8010),
|
|
vlacpCannotBeEnabledOnEapolPorts(8011),
|
|
macsecNotAllowedOnEapolPorts(8012),
|
|
eapolNotAllowedOnMacsecPorts(8013),
|
|
eapolCannotBeConfiguredOnIsisInterface(8014),
|
|
isisConfigurationNotAllowedOnEapolEnabledPorts(8015),
|
|
eapolNotAllowedOnFlexuniFaInterface(8016),
|
|
eapolNotAllowedOnPrivateVlanInterface(8017),
|
|
eapolInvalidMaxClientsValue(8018),
|
|
eapolInvalidEapMaxClientsValue(8019),
|
|
eapolInvalidNonEapMaxClientsValue(8020),
|
|
eapolGuestVlanNotAllowedAsPrivateVlan(8021),
|
|
eapolFailOpenVlanNotAllowedAsPrivateVlan(8022),
|
|
eapolGuestVlanNotAllowedAsSpbmBVlan(8023),
|
|
eapolFailOpenVlanNotAllowedAsSpbmBVlan(8024),
|
|
eapolMhsaNotAllowedOnFOVEnabledPorts(8025),
|
|
eapolFOVNotAllowedOnMhsaEnabledPorts(8026),
|
|
eapolNotAllowedOnIpSourceGuardEnabledPorts(8027),
|
|
eapolOperModeCannotBeChangedOnEapolEnabledPorts(8028),
|
|
eapolGuestVlanNotAllowedOnDhcpsnVlan(8029),
|
|
eapolFailOpenVlanNotAllowedOnDhcpsnVlan(8030),
|
|
eapolPortCannotBeEnabledIfVlanIsDhcpsn(8031),
|
|
communityAlreadyExists(9101),
|
|
communityDoesnotExist(9102),
|
|
communityStorageTypePermanent(9103),
|
|
defaultEntryNotDeletable(9104),
|
|
invalidAccessPolicyStrict(9105),
|
|
targetAddressNotExist(9106),
|
|
cannotChangeCurrentAndDeprecatedMib(9107),
|
|
invalidPath(9108),
|
|
duplicateTargetAddress(9110),
|
|
notifyTagIsOnlyAllowedUpTo32Chars(9112),
|
|
authenticationFailureTrapMustBeEnabledFirst(9113),
|
|
macFlapLimitTimeNotValid(9114),
|
|
udpSrcByVipCannotBeEnabledWithoutVip(9115),
|
|
configFileNameIsRequiredForSaveToSlave(9116),
|
|
noSpaceAllowedInFilename(9117),
|
|
noSpaceAllowedInPathname(9118),
|
|
cannotDeleteAllMgmtVirtualIpWhenUdpSrcByVipEnabled(9119),
|
|
invalidSaveConfigFilename(9120),
|
|
notAllowToCreateOrDeleteNotifyEntry(9121),
|
|
entityIsNotPresentOnDevice(9122),
|
|
rmonMemFail(9201),
|
|
rmonEnableMustCreateIpHostFirst(9202),
|
|
deleteIpHostMustDisableRmonFirst(9203),
|
|
rmonMaxHostReached(9204),
|
|
rmonInvalidOwnerValue(9205),
|
|
cannotChangeInterfaceRmonWhenGlobalRmonDisabled(9206),
|
|
rmonIsDisabled(9207),
|
|
rmonAlarmInvalid(9208),
|
|
rmonUnwritable(9209),
|
|
rmonEventInvalid(9210),
|
|
rmonOidNotFound(9211),
|
|
rmonOidInvalid(9212),
|
|
rmonEventInUse(9213),
|
|
rmonIncompleteRequest(9214),
|
|
rmonInvalidCharInDescription(9215),
|
|
rmonInvalidCharInCommunity(9216),
|
|
rmonMaxStatsReached(9217),
|
|
rmonMaxHistoryControlReached(9218),
|
|
rmonMaxHistoryEthernetReached(9219),
|
|
rmonMaxAlarmsReached(9220),
|
|
rmonMaxEventsReached(9221),
|
|
rmonAlarmThresholdNeeded(9222),
|
|
rmonHistoryIntervalCannotBeModifiedAfterCreation(9223),
|
|
portMirroringTxNotSupportForThisHardwareRevision(9301),
|
|
cannotSetMode(9302),
|
|
cannotSetFraming(9303),
|
|
cannotModifyInLaneMode(9304),
|
|
stpIsNotAllowedToBeEnabledOnIstPort(9305),
|
|
mirroredPortSupportRXModeOnly(9306),
|
|
secondaryCpuNotActive(9307),
|
|
commandNotAllowedInPrimaryCpu(9308),
|
|
pcapUserDefinedDataInConsistency(9309),
|
|
pcapFilterTblEntryNotFound(9310),
|
|
pcapFilterTblDuplicateEntry(9311),
|
|
pcapBufferSizeExceedsMaximumRamLimit(9312),
|
|
portPcapIsActive(9313),
|
|
pcapCommandNotAllowedWhenPcapIsEnabled(9314),
|
|
invalidNumberOfHexDigits(9315),
|
|
commandNotAllowedInHaCpuMode(9316),
|
|
pcapCommandNotAllowedIn3SlotChassis(9317),
|
|
pcapNoMemoryAllocatedForPcap(9318),
|
|
pcapCannotBeEnabledWhenAutosaveInProgress(9319),
|
|
pcapInvalidTimerRangeValue(9320),
|
|
cannotSetPortAdminRouting(9322),
|
|
smltNotAllowedObBrouterPort(9323),
|
|
pcapOctapidNotInitialized(9324),
|
|
pcapNoPackets(9325),
|
|
pcapInsufficientDiskSpace(9326),
|
|
pcapAutoSaveOrCopyCommandInProgress(9327),
|
|
rmCommandNotAllowedWhenRemoteMirroringIsEnabled(9328),
|
|
rmVlanNotPortBasedVlan(9329),
|
|
rmPortNotMemberOfVlan(9330),
|
|
rmSrcMacAddressNotSet(9331),
|
|
rmRemoteMirroringActiveInOctapd(9332),
|
|
rmRmtExceedsMaxLimit(9333),
|
|
rmVlanIdNotSetForRmtPort(9334),
|
|
rmDstMacNotSet(9335),
|
|
rmPortDuplicateEntry(9336),
|
|
rmPortEntryNotCreated(9337),
|
|
rmRemoteMirroringActiveInRspLane(9382),
|
|
portEapAuthorized(9345),
|
|
portEapEnabled(9362),
|
|
rateLimitingrmodPort(9363),
|
|
bandwidthLimitingNonrmodPort(9364),
|
|
egressRateLimitingNotAppToNonRModPort(9365),
|
|
featureNotApplyToMixedMlt(9368),
|
|
rateLimitingExistsForMlt(9369),
|
|
differentPortConfigurationForMlt(9370),
|
|
rModuleOnlyOneMirroredPortPerLane(9371),
|
|
ieee8021pOverrideNotAppToNonRModPort(9372),
|
|
portMirroringTxFilterNotSupportForThisHardwareRevision(9373),
|
|
portIsDownOperationNotAllowed(9374),
|
|
portSffdEnableError(9375),
|
|
portTxFlowControlNotSupportedForThisHW(9376),
|
|
portFcPause0NotSupportedForThisHW(9377),
|
|
portFcPauseTimeNotSupportedForThisHW(9378),
|
|
slppInvalidTxInterval(9380),
|
|
slppInvalidRxThreshold(9381),
|
|
cannotSetClockSource(9394),
|
|
ingressPoliceNonRsPort(9395),
|
|
customAutoNegAdvertNotSupported(9396),
|
|
autoNegotiateIsDisable(9397),
|
|
slppInvalidEtherType(9398),
|
|
recordReserveTypeInvalid(9401),
|
|
recordReserveOutOfRange(9402),
|
|
recordReserveExceedPhyLim(9403),
|
|
cannotUpNonEticketCard(9404),
|
|
cannotUpNon128KCard(9405),
|
|
naapVlanNotConfigured(9406),
|
|
lpMiniSlotNotPresent(9407),
|
|
lpSlotDisabled(9408),
|
|
lpSlotEnabled(9409),
|
|
cannotUpNonEmmodeCard(9410),
|
|
cannotUpNonRmodeCard(9411),
|
|
cannotUpNonRspCard(9412),
|
|
dnsDuplicateEntry(9413),
|
|
dnsEntryNotFound(9414),
|
|
dnsEntryNotCreated(9415),
|
|
smartCpldNotSupported(9416),
|
|
slotNotPresent(9418),
|
|
rmodeRequired(9419),
|
|
maxVlanDisallow(9420),
|
|
softwareLicenseViolation(9425),
|
|
cpuActionNotAllowed(9426),
|
|
resetOperNotAllowed(9427),
|
|
cpuActionNotAllowedPwrPrio(9428),
|
|
ntpIncorrectKeyValue(9435),
|
|
accessPolicyGroupNameInvalid(9436),
|
|
yearAllowedToBeSetExceeds(9438),
|
|
adminStatusCannotBeModifiedOnMasterCP(9439),
|
|
resetOnlyAllowedOnStandbyCPOrIOCardOrSFCard(9440),
|
|
cardIsNotPoweredOn(9441),
|
|
adminEnableOrDisableIsOnlyAllowedOnIOCard(9442),
|
|
powerPriorityOfCPCannotBeModified(9443),
|
|
powerPriorityCannotBeModifiedOnSF1andSF4(9444),
|
|
powerPriorityCannotBeModifedOnThisSlot(9445),
|
|
poweringDownOfMasterCPIsNotAllowed(9446),
|
|
powerDownOnlyAllowedOnIOAndSFSlot(9447),
|
|
powerIsAlreadyOn(9448),
|
|
powerIsAlreadyDown(9449),
|
|
dnsEntryCannotBeCreatedWithoutAddress(9450),
|
|
dnsServerIpv6AddressNotSupported(9451),
|
|
powerPriorityCannotBeSetToCritical(9452),
|
|
fabStatsCaptureCannotBeEnabledWithoutPort(9453),
|
|
resetOnlyAllowedOnOneManagementSFCard(9454),
|
|
onlyOneManagementSFCardPowerDown(9455),
|
|
sysTakeIOCardOfflineMustBeEnabledFirst(9456),
|
|
sysAutoResetFabricMustBeDisabledFirst(9457),
|
|
cannotModifyTheAdminStatusOfMasterFabric(9458),
|
|
slotResetNotAllowedOnVsp4000(9459),
|
|
invalidSlotNumber(9460),
|
|
advancedSoftwareLicenseViolation(9461),
|
|
premierSoftwareLicenseViolation(9462),
|
|
fabStatsCaptureCantBeEnabledWhenAddingNewPort(9463),
|
|
fabStatsCaptureEnableForOnePortOnly(9464),
|
|
fabStatsCaptureAlreadyEnabled(9465),
|
|
cannotPowerGen1CardWhenSwitchIsRunningInGen2Mode(9466),
|
|
cannotEnableOrResetGen1CardWhenSwitchIsRunningInGen2Mode(9467),
|
|
slotResetNotAllowed(9470),
|
|
slotShutdownNotAllowedOnThisPlatform(9471),
|
|
chassisOnlySupportBaudRate(9472),
|
|
tenGEMltPortCannotBeAddedToStgWithSMLT(9501),
|
|
tenGEPortCannotBeAddedToStgWithSMLT(9502),
|
|
rstpInvalidVal(9504),
|
|
mstpInvalidVal(9505),
|
|
mstpOperationNotAllowed(9542),
|
|
priorityValueMustBeAMultipleOf4096(9510),
|
|
switchIsNotInRstpMode(9514),
|
|
switchIsNotInMstpMode(9515),
|
|
maxAgeMustEqualOrGreatThan2XPortHelloTimePlus1Second(9520),
|
|
pbtStgCannotEnableStp(9521),
|
|
maxAgeMustEqualOrLessThan2XForwardDelayMinus1Second(9529),
|
|
mappingExistsForInstanceUnmapVlansFirst(9535),
|
|
plsbMstpInstanceAllowedOnlyInMstpMode(9536),
|
|
plsbStgInstanceCannotBeRemovedWhenPlsbVlanExists(9537),
|
|
stgInstanceCannotBeSetToPlsbType(9538),
|
|
plsbMstiCannotEnableForcePortState(9539),
|
|
protocolMigrationCannotBeSetIfForceportstateIsDisabled(9540),
|
|
protocolMigrationCanBeSetOnlyForForceVersionRstpOrMstp(9541),
|
|
pcapDumpCommandInProgress(9555),
|
|
ospfOverlappingSummarizedRange(9601),
|
|
ospfHelloIntNotGreatDeadInt(9605),
|
|
invalidOperation(9608),
|
|
ospfInterfaceLimitExceeded(9609),
|
|
ospfAreaLimitExceeded(9610),
|
|
ospfEnableNotAllowedOnDvrVlan(9611),
|
|
cluserInvalidId(9901),
|
|
clusterDoesNotExist(9902),
|
|
clusterAlreadyExists(9903),
|
|
clusterSizeExceeded(9904),
|
|
invalidMiniSlot(9905),
|
|
brouterOpNotAllowedOnIsdPort(9907),
|
|
clusterIdMandatory(9906),
|
|
removeVlanBeforeDeletingCluster(9908),
|
|
vlanWithIPXEnabledCannotAdd10GEPortOrMlt(1101),
|
|
addRemDsapSsapNotAllowed(1102),
|
|
maxDsapSsapExceeded(1103),
|
|
vlanInvalidEncap(1104),
|
|
vlanEnforcementNotAllowed(1109),
|
|
vlanNaapVlanPortMustBeTagged(1110),
|
|
vlanRegPortNotAllowedInNaapVlan(1111),
|
|
vlanFwPortNotAllowedInRegVlan(1112),
|
|
invalidVlanIdSpecified(1113),
|
|
retrieve10GEInfoFailure(1115),
|
|
minMacGreaterThanMaxMac(1116),
|
|
maxMacLessThanMinMac(1117),
|
|
prPortNotForStackedVlan(1121),
|
|
prPortNotForIPXVlan(1122),
|
|
vlanAgingTimeNotAppToStaticVlan(1123),
|
|
naapInvalidVlanId(1126),
|
|
clusterIsdAlreadyUsed(1129),
|
|
regularPortsNotAllowedInPeeringVlan(1130),
|
|
regularPortsNotAllowedInClusterSyncVlan(1131),
|
|
mltSdmPortNotAllowed(1132),
|
|
clusterIdNotAllowedForNormalVlan(1133),
|
|
clusterTypeNotSupported(1134),
|
|
clusterMgmtSyncVlanCannotBeSame(1135),
|
|
nsnaPortNotConfigurable(1138),
|
|
nsnaUplinkOperationNotAllowed(1139),
|
|
clusterTpsSizeExceeded(1145),
|
|
clusterNotFwIsd(1148),
|
|
clusterNotTpsIsd(1149),
|
|
vlanFwPortDelNotAllowedInRegVlan(1151),
|
|
fwPortNotAlwdForClusterTypeIs(1152),
|
|
syncVlanNotAlwdForClusterTypeIs(1153),
|
|
portMemberNotAlwdForNonIsCluster(1154),
|
|
portMemberOfIsClusterCannotBeSdmPort(1155),
|
|
portHasPcapEnabled(1156),
|
|
portInSameOctapidAsIsCluster(1157),
|
|
pcapInvalidTypeForAclFilter(1160),
|
|
rmodOnlyOnePcapPortPerLane(1161),
|
|
fdbEntryNotFound(1172),
|
|
fdbStatusMismatch(1173),
|
|
rstpOnlyDefaultInstanceAllowed(1174),
|
|
vlanMacRecordDoesNotExist(1182),
|
|
vlanMacRecordIsNotALearnedMac(1183),
|
|
vlanFdbMandatoryParametersMissing(1184),
|
|
maxSubnetVlanReached(1185),
|
|
maxProtocolVlanReached(1186),
|
|
cannotCreateFilterEntryForTdpMac(1187),
|
|
entryAlreadyExists(1188),
|
|
macIsConfiguredAsStaticMacInVlan(1189),
|
|
macHasBeenLearntConfiguredInVlan(1190),
|
|
macIsBeingUsedAsLoopDetectMac(1191),
|
|
cannotCreateFilterEntryForLocalMac(1192),
|
|
cannotCreateFilterEntryForBpudMac(1193),
|
|
cannotCreateFilterEntryForLacpMac(1194),
|
|
cannotCreateFilterEntryForVlacpMac(1195),
|
|
cannotUntagPort(1196),
|
|
duplicateProtocolIdRecord(1197),
|
|
cannotAddPortsToPlsbBVlan(1198),
|
|
unsupportedVlanType(1199),
|
|
dynModMaxModule(1201),
|
|
dynModUnknown(1202),
|
|
dynModAlreadyLoaded(1203),
|
|
dynModCantOpenFile(1204),
|
|
dynModNotEnoughSpace(1205),
|
|
promptCanNotHaveWhiteSpaces(1239),
|
|
circuitlestInvalidIpInterfaceId(1501),
|
|
circuitlessMaxNumberIpInterfacesReached(1502),
|
|
circuitDoesNotExist(1503),
|
|
circuitAlreadyExists(1504),
|
|
circuitlessIpInterfacesOperationNotAllowed(1505),
|
|
priority255SpecialForPhyIpSameAsVrIp(1506),
|
|
icmpRdiscInvalidPreferenceLevel(1507),
|
|
icmpRdiscAdvAddrIsNotBroadcastOrMulticastAddr(1508),
|
|
icmpRdiscInvalidMaxAdvInt(1509),
|
|
icmpRdiscMinAdvIntvGreaterThanMaxAdvIntvOrLessThan3Secs(1510),
|
|
icmpRdiscLifeTimeLessThanMaxAdvIntvOrGreaterThan9000Secs(1511),
|
|
vrrpInvalidFasterAdvertInterval(1512),
|
|
vrrpFasterAdvEnabled(1513),
|
|
vrrpFasterAdvDisabled(1514),
|
|
vrrpInvalidFastAdvEnableValue(1515),
|
|
globalFiltersNotSupportFwdingNextHopMode(1516),
|
|
vrrpPreemptActionNotAllowed(1517),
|
|
rcPimModeIgmpVersionIncompatible(1518),
|
|
invalidOrInconsistentBroadCastMaskValue(1519),
|
|
invalidRipTimeoutInterval(1520),
|
|
rsmltNoCirc(1521),
|
|
rsmltInvalidHoldUpTimer(1522),
|
|
rsmltNoBrouter(1523),
|
|
rsmltNoIst(1524),
|
|
vrrpSetWithRsmltEnable(1527),
|
|
rsmltSetWithVrrpEnable(1528),
|
|
ipEcmpMaxPathExceeded(1530),
|
|
ipEcmpPathListNotAllowedInRmode(1531),
|
|
featureAppliesToRmodulePortsOnly(1532),
|
|
invalidVrrpEntry(1533),
|
|
invalidIpOwnerVrrpPrio(1534),
|
|
circuitlessIpUsedByIpvpnRD(1537),
|
|
ipAddressNotAssociatedWithVlan(1540),
|
|
arpEntryNotFound(1541),
|
|
arpDeleteSupportedOnlyForDynamicArps(1542),
|
|
arpDeleteCannotDeleteArpWithRoutes(1543),
|
|
arpMulticastMacAddressNotAllowed(1544),
|
|
arpBroadcastMacAddressNotAllowed(1545),
|
|
arpNoIpAddrAssociatedWithPort(1546),
|
|
arpIncorrectIpAddress(1547),
|
|
ipCircuitShouldExistForDhcpEnable(1548),
|
|
arpEntryCreateionRequiresMacAddress(1549),
|
|
arpEntryMofifcationNotAllowed(1550),
|
|
interfaceDoesNotHaveIpAddressAssigned(1551),
|
|
cannotConfigSameAddrWithDiffPrefixLength(1552),
|
|
cannotConfigureAddrWhichIsSiteLocal(1553),
|
|
portEnteredNotAssociateWithVRF(1554),
|
|
cannotDeleteLocalArpEntry(1555),
|
|
invalidArpType(1556),
|
|
arpEntryDoesNotExist(1557),
|
|
vlanEnteredNotAssociateWithVRF(1558),
|
|
cannotAddLocalArpEntry(1559),
|
|
ipEcmpMaxPathIs4ForVsp4000(1560),
|
|
ipPrefixListMaskLenGeValueGreaterThanLeValue(1561),
|
|
systemRequiresAdvancedLicenseToCreateMoreThanOneIpAddress(1562),
|
|
vrrpCriticalIpAddrEnabled(1563),
|
|
vrrpDefaultNonCriticalIpAddress(1564),
|
|
ipCreateInsufficientResource(1567),
|
|
rsmltEnableInsufficientResource(1568),
|
|
vrrpEnableInsufficientResource(1569),
|
|
vrrpIpAddressAlreadyUsedForAnotherVrrpId(1570),
|
|
broadcastIpAddressNotSupported(1571),
|
|
vrrpAuthTypeChangeNotAllowed(1572),
|
|
vrrpAuthKeyChangeNotAllowed(1573),
|
|
vrrpHmacMD5KeyChangeNotAllowed(1574),
|
|
vrrpPreemptModeChangeNotAllowed(1575),
|
|
localRoutePreferenceChangeNotAllowed(1576),
|
|
systemRequiresLicenseInstalledToCreateMoreThanOneIpAddr(1577),
|
|
circuitlessIpUsedByMsdp(1578),
|
|
maxInterfaceCreated(1579),
|
|
invalidHelpSourcePathname(1601),
|
|
invalidHelpSourceRemotePathname(1602),
|
|
webInvalidHttpsPort(1603),
|
|
identicalHttpPortHttpsPortNotSupported(1604),
|
|
tcpPortIsReservedForOtherFeature(1605),
|
|
tcpPortIsBeingUsedByHttps(1606),
|
|
tcpPortIsBeingUsedByHttp(1607),
|
|
helpSourcePathnameShouldBeLocalOrRemoteOrUsb(1608),
|
|
helpSourcePathnameShouldBeLocalOrRemote(1609),
|
|
webPasswordLenInvalid(1610),
|
|
invalidDdmMonitorInterval(1801),
|
|
invalidDdmMonitor(1802),
|
|
invalidDdmTrapsSend(1803),
|
|
invalidDdmAlarmPortdown(1804),
|
|
ddmMonitorConfigurationNotSupported(1805),
|
|
ddmAlarmPortdownConfigurationNotSupported(1806),
|
|
igmpOutOfSsmRange(2301),
|
|
igmpDuplicateSsmTblEntry(2302),
|
|
igmpSsmEntryDoesNotExist(2303),
|
|
igmpSsmTblNotEmpty(2304),
|
|
igmpRpSetExistsInSsmRange(2305),
|
|
igmpCandidateRpExistsInSsmRange(2306),
|
|
igmpIfInvalidQIntervalMrt(2307),
|
|
igmpAlreadyEnabled(2308),
|
|
igmpMaxStreamExceeded(2309),
|
|
igmpStreamLimitAlreadyEnabled(2310),
|
|
igmpStreamLimitNotEnabled(2311),
|
|
igmpPimEnabledInSSMMode(2312),
|
|
igmpDisableV3First(2313),
|
|
igmpSSmConflictsWithSsgEntry(2314),
|
|
igmpSsmCanNotDisableDynamicEntry(2315),
|
|
invalidIpMulticastRange(2316),
|
|
igmpStaticGroupCountExceeded(2317),
|
|
igmpOverlappingStaticRangeNotAllowed(2319),
|
|
igmpCannotEditStaticRecMcastDisabledGloballyOrOnVlan(2320),
|
|
igmpMulticastRoutingEnabled(2321),
|
|
igmpMVREnabled(2322),
|
|
igmpMVRVlanIsMvrVlan(2323),
|
|
igmpMVRVlanIsReceiverVlan(2324),
|
|
igmpMVRVlanCanNotBeDeleted(2325),
|
|
igmpMVRVlanReachMaximum(2326),
|
|
igmpPortMaxStreamExceedsIntfMaxStream(2327),
|
|
igmpQueryMaxResponseUnsupportedOnV1(2328),
|
|
igmpMvrVlanIstSmlt(2331),
|
|
igmpMvrVlanMlt(2332),
|
|
igmpExplicitHostTrackingRequired(2333),
|
|
igmpExplicitHostTrackingUnsupportedOnV1V2(2334),
|
|
igmpCannotDeleteLastPortStaticGroup(2335),
|
|
igmpUnspecifiedPortStaticGroup(2336),
|
|
igmpNotVersion3(2337),
|
|
igmpDisableSsmSnoop(2338),
|
|
portIsRequiredForIgmpStaticEntryCreation(2339),
|
|
snoopCannotBeEnabledWithPim(2340),
|
|
snoopCannotBeEnabledWithDvmrp(2341),
|
|
dvmrpCannotBeEnabledWithSnoop(2342),
|
|
pimCannotBeEnabledWithSnoop(2343),
|
|
igmpFlushActionNotAllowedWhenIgmpSnoopingIsDisabled(2344),
|
|
igmpCannotModifyToGrpAddr(2345),
|
|
igmpImmediateLeaveUnsupportedOnV1(2346),
|
|
igmpStreamLimitCanBeEnabledOnlyOnBrouterOrVlan(2348),
|
|
igmpAccessListIpHostAddressNotConfigured(2349),
|
|
ipfStreamAlreadyExists(2401),
|
|
ipfStreamDoesNotExists(2402),
|
|
ipfStreamInvalidStreamType(2403),
|
|
ipfStreamInvalidPortOption(2404),
|
|
ipfStreamNameTooLong(2405),
|
|
ipfStreamInvalidProtocol(2406),
|
|
ipfStreamInvalidDscp(2407),
|
|
ipfDeviceAlreadyExists(2408),
|
|
ipfDeviceUnknownPlatform(2409),
|
|
ipfDeviceUnknownDevice(2410),
|
|
ipfDeviceDoesNotExists(2411),
|
|
ipfDeviceNameTooLong(2412),
|
|
ipfOneZeroIpDestFilterIsAllowed(2413),
|
|
ipfGlobalFilterMaxPerOctapid(2414),
|
|
ipfDeviceMaxPerPort(2415),
|
|
ipfDeviceMaxPerBox(2416),
|
|
ipfDeviceMaxFilterList(2417),
|
|
ipfInvalidRmodPort(2418),
|
|
ipfSourceNextHopModeNotSupported(2419),
|
|
aclErrIdInvalid(2428),
|
|
aclErrNameInvalid(2429),
|
|
aclErrTypeInvalid(2430),
|
|
aclErrNotExist(2431),
|
|
aclErrInUse(2432),
|
|
aclErrExists(2433),
|
|
aceErrAceNotExist(2438),
|
|
aceInvalidMode(2482),
|
|
aceEgressqEgressqnnscInvalid(2483),
|
|
aceMaskOperCannotHaveList(2494),
|
|
aclErrTypeOutVlanInvalidForVsp4k(2495),
|
|
aclErrTypeOutVlanInvalid(2496),
|
|
cannotDeleteIntMltId(2501),
|
|
mltNoThisVlan(2502),
|
|
mltPortsDifferentFramingMode(2503),
|
|
moreThan2PortsInMlt(2504),
|
|
portCannotBeAddedToDefualtVLANWithIPXEnabled(2505),
|
|
portMemberNotSupportSMLT(2506),
|
|
tenGEMltPortOrMltCannotBeAddedToVlanWithSmltMember(2507),
|
|
tenGEMltPortCannotRunTogetherWithSMLT(2508),
|
|
portCannotBeAddedToDefualtVLANWithSMLT(2509),
|
|
tenGEPortOrMltCannotBeAddedToVlanWithSmltMember(2510),
|
|
tenGEPortOrMltCannotRunTogetherWithSMLT(2511),
|
|
tenGEPortNotSupportMcastDistribution(2512),
|
|
tenGEPortNotSupportMLT(2513),
|
|
mltSmltIdAlreadyExists(2514),
|
|
mltInvalidSmltId(2515),
|
|
mltSmltNotConfigured(2516),
|
|
mltSmltAlreadyConfigured(2517),
|
|
mltPortIsMemberOfMlt(2518),
|
|
mltPortIsMemberOfSmlt(2519),
|
|
mltSmltIpAddrNotAllowedOnSltPort(2520),
|
|
mltUsedForLacp(2521),
|
|
mltPortUsedForLacp(2522),
|
|
mltUsedForMlt(2523),
|
|
operationNotAllowedOnMltPort(2529),
|
|
mltNsnaUplinkMismatch(2538),
|
|
mltIdInvalidInNonRmode(2539),
|
|
mltNaapVlanCannotBeAddedToIst(2540),
|
|
mltIstCannotBeCreatedOverMltWithNaapVlan(2541),
|
|
mltNaapCannotBeAddedToMltWithActiveIst(2542),
|
|
mltVrfVlanAndLegacyPortCannotBeMembers(2563),
|
|
cannotUntagMlt(2567),
|
|
mltNameIsReservedAsDefautNameForAnotherMlt(2568),
|
|
quotesNotAllowedInsideTheNameString(2569),
|
|
mltNameIsBeingUsedByAnotherMlt(2570),
|
|
mltCpLimitShutdownOnIstMltNotAllowed(2571),
|
|
peerIpAndIstVlanNotInSameSubnet(2572),
|
|
peerIpAndLocalIpCannotBeSame(2573),
|
|
numOfMltAllowedToBeCreatedExceeds(2574),
|
|
moreThan16PortsInMlt(2575),
|
|
moreThan8PortsInMlt(2576),
|
|
istAndSplitMltTypeNotSuuported(2577),
|
|
mltIstIsNotSupported(2578),
|
|
virtualIstCanBeEnabledOnOnlyOneMlt(2579),
|
|
virtualIstPeerIpMustBeConfiguredBeforeMltVistEnable(2580),
|
|
virtualIstOnMltMustBeDisabled(2581),
|
|
virtualIstAllowedOnlyWhenSpanningTreeModeSetToMstp(2582),
|
|
virtualIstMltCannotBeMemberOfVlan(2583),
|
|
smltAlreadyConfiguredOnMlt(2584),
|
|
istAlreadyConfiguredOnMlt(2585),
|
|
virtIstAlreadyConfiguredOnMlt(2586),
|
|
numOfMltAllowedToBeCreatedExceeds64(2587),
|
|
numOfMltAllowedToBeCreatedExceeds50(2588),
|
|
mltBelongToOnePortBasedVlanForAccessPort(2589),
|
|
virtualIstAllowedOnlyWhenAdvancedFeatureEnabled(2590),
|
|
asListOverLimit(2601),
|
|
communityListOverLimit(2602),
|
|
mltSmltLacpInvalidKey(2603),
|
|
extCommunityListOverLimit(2606),
|
|
extCommunityInvalidListId(2607),
|
|
extCommunityListIdExceedsRange(2608),
|
|
mcastMltNotEnabled(2701),
|
|
mcastMltInvalidSrcMask(2702),
|
|
mcastMltInvalidGrpMask(2703),
|
|
mcastMltRedistrNotEnabled(2704),
|
|
mcastMltDiscontiguousSrcMaskValue(2705),
|
|
mcastMltDiscontiguousGrpMaskValue(2706),
|
|
mcastMltNotEnabledOnMlt(2707),
|
|
mcastMltPortOnNonEtkt(2708),
|
|
mcastMltConfMaskDisableMcastMlt(2709),
|
|
ipmcTimePruneConflictsWithSsmEntry(2710),
|
|
mcastMltCannotBeDisabled(2712),
|
|
mcastRoutingNotEnabledGlobally(2713),
|
|
rcSnmpSyslogDisableSyslogFirst(2801),
|
|
rcSnmpInvalidSyslogHeader(2802),
|
|
configSyslogHostAddrBeforeEnabling(2803),
|
|
syslogInvalidTcpPort(2804),
|
|
syslogHostEnabledCannotModifyIpAddr(2805),
|
|
syslogTcpPortMustBeUniqueAcrossHosts(2806),
|
|
syslogHostEnabledCannotModifyTcpPort(2807),
|
|
syslogHostEnabledCannotDeleteHost(2808),
|
|
syslogSecureEnabledHostsExceedMaxSshSessions(2809),
|
|
syslogOnlyUninstallActionAllowedWhileDeletingRootCert(2810),
|
|
syslogOnlyInstallActionAllowedWhileCreatingRootCert(2811),
|
|
syslogRootCertFileAlreadyInstalled(2812),
|
|
syslogRootCertFileNotFound(2813),
|
|
syslogRootCertFileNotInstalled(2814),
|
|
syslogHostEnabledCannotModifyMode(2815),
|
|
syslogHostEnabledCannotModifyServerCertName(2816),
|
|
syslogHostUnsupportedModeSsh(2817),
|
|
dvmrpMBRNotAllowed(2901),
|
|
dvmrpInvalidIntfTypeChange(2902),
|
|
ipxPolicyNetEntryNotFound(3101),
|
|
ipxPolicyNetDuplicateEntry(3102),
|
|
ipxPolicyNetListEntryNotFound(3103),
|
|
ipxPolicyNetListDuplicateEntry(3104),
|
|
ipxPolicyServEntryNotFound(3105),
|
|
ipxPolicyServDuplicateEntry(3106),
|
|
ipxPolicyServeListEntryNotFound(3107),
|
|
ipxPolicyServListDuplicateEntry(3108),
|
|
ipxPolicyPolicyEntryNotFound(3109),
|
|
ipxPlicyPolicyDuplicateEntry(3110),
|
|
ipxRoutePolicyNetListOverLimit(3111),
|
|
ipxRoutePolicyServListOverLimit(3112),
|
|
ipxPolicyRipOutFilterEntryNotFound(3113),
|
|
ipxPolicySapOutFilterEntryNotFound(3114),
|
|
ipxPolicyRipInFilterEntryNotFound(3115),
|
|
ipxPolicySapInFilterEntryNotFound(3116),
|
|
ipxPolicyIpxNetEntryInvalidName(3117),
|
|
ipxPolicyIpxServEntryInvalidName(3118),
|
|
ipxPolicyPolicyEntryInvalidName(3119),
|
|
vlanHas10GEMemberWhichNotSupportIPX(3120),
|
|
vlanContainUnSupportedPrPort(3121),
|
|
invalidLengthOf2kBootConfigLicenseSource(3401),
|
|
licenseFileDoesNotExist(3402),
|
|
licenseFileIsAlreadyLoaded(3405),
|
|
linecardCompatibilityModeConfigAllowedOnlyOnMasterSlot(3406),
|
|
noValidLicenseFileFound(3407),
|
|
systemSupportsAdvancedFeatureReservationHighOnly(3408),
|
|
systemSupportsAdvancedFeatureReservationLowOnly(3409),
|
|
badTftpTimeout(3411),
|
|
badHostUser(3412),
|
|
badHostPassword(3413),
|
|
badTftpRetransmit(3414),
|
|
qosRateLimitEnableAllowedOnlyForConsecutiveQueues(3628),
|
|
invalidModeForAtmMDAType(3901),
|
|
atmInvalidPVCEncapTypeForElan(3902),
|
|
atmInvalidPVCPCRRange(3903),
|
|
unsupportedVPI(3904),
|
|
radiusAuthAcctAttrSame(4101),
|
|
radiusAuthAcctPortSame(4102),
|
|
radiusAuthAcctNoServerConfig(4103),
|
|
radiusReAuthTimerFailed(4104),
|
|
radiusAbortSesionTimerFailed(4105),
|
|
radiusInvalidSnmpUserLength(4106),
|
|
radiusInvalidCliCommandCount(4107),
|
|
radiusAuthAcctNoServerButSnmpConfig(4112),
|
|
radiusDisableAcctBeforeDeletingLastServer(4113),
|
|
radiusEnableRadiusBeforeEnablingAccounting(4114),
|
|
disableAccountingBeforeDisablingRadius(4115),
|
|
rtmMaxRouteLicensedLimitReached(4501),
|
|
ripEnableExceedsMaxLimit(4701),
|
|
ripEnableExceedsMaxLimitOn4k(4702),
|
|
ripEnableExceedsMaxLimit200(4703),
|
|
ripEnableNotAllowedOnDvrVlan(4704),
|
|
pimGlobInvalidUniRouteChangeTimeOut(4801),
|
|
pimGlobInvalidDiscDataTimeOut(4802),
|
|
pimGlobInvalidCRPADVTimeOut(4803),
|
|
pimGlobInvalidBootStrapPeriod(4804),
|
|
pimStaticRpEnabled(4805),
|
|
pimStaticRpNotEnabled(4806),
|
|
pimStaticRpEntryExists(4807),
|
|
pimStaticRpNoRoute(4808),
|
|
pimAddressInSsmRange(4809),
|
|
pimInvalidModeChange(4810),
|
|
pimStaticRpNotAllowed(4811),
|
|
pimMBRNotAllowed(4812),
|
|
pimGlobInvalidActChkInterval(4813),
|
|
pimGlobActChkIntervalNotAllowed(4814),
|
|
pimGlobNotSuppActChkInterval(4817),
|
|
pimVirtualNbrInvalidIfIndex(4818),
|
|
pimIntfChangeNotAllowedWhenEnabled(4819),
|
|
pimNotSupportedForMulticastVrf(4820),
|
|
pimFeatureNotSupported(4822),
|
|
pimCandidateRpTableMaxSizeReached(4823),
|
|
pimCandidateRpAdddressAlreadyConfigured(4824),
|
|
rpsMcastMaskLenToNotAllowed(4901),
|
|
rpsExtendedAclListNameInvalid(4902),
|
|
rpsExtendedAclDuplicateEntry(4903),
|
|
rpsExtendedAclListNotFound(4904),
|
|
rpsExtendedAclEntryNotFound(4905),
|
|
rpsExtendedAclDuplicateListFound(4906),
|
|
rpsIpPrefixListIdAlreadyExists(4907),
|
|
rpsIpPrefixListNameAlreadyExists(4908),
|
|
ntpSourceIpDoesNotExist(5002),
|
|
brouterIpIsBeingUsedByNtpAsSourceIp(5003),
|
|
clipIpIsBeingUsedByNtpAsSourceIp(5004),
|
|
vlanIpIsbeingUsedByNtpAsSourceIp(5005),
|
|
mgmtPortIsBeingUsedByNtpAsSourceIp(5006),
|
|
mgmtVirtualIpIsBeingUsedByNtpAsSourceIp(5007),
|
|
ntpKeyIncorrectType(5008),
|
|
ntpKeySecretNotConfigured(5009),
|
|
cannotCreateNtpServerUsingAForbiddenIpAddress(5010),
|
|
onlyAlphanumCharsForNtpKey(5011),
|
|
tcpConnectionNotFound(5101),
|
|
tcpInvalidState(5102),
|
|
tcpSessionsInUse(5103),
|
|
bgpPeerNotFound(5201),
|
|
bgpInvalidPeerEnable(5202),
|
|
bgpInvalidPeerRemoteas(5203),
|
|
bgpInvalidPeerGroupName(5204),
|
|
bgpInvalidPeerDefaultOriginate(5205),
|
|
bgpInvalidPeerEbgpMultiNop(5206),
|
|
bgpInvalidPeerAdvertisementInterval(5207),
|
|
bgpInvalidPeerPassword(5208),
|
|
bgpInvalidPeerWeight(5209),
|
|
bgpInvalidPeerNextHopSelf(5210),
|
|
bgpInvalidPeerRoutePolicyIn(5211),
|
|
bgpInvalidPeerRoutePolicyOut(5212),
|
|
bgpInvalidPeerRouteReflectorClient(5213),
|
|
bgpInvalidPeerSoftReconfigurationIn(5214),
|
|
bgpInvalidPeerSoftReconfiguration(5215),
|
|
bgpInvalidPeerRemovePrivateAs(5216),
|
|
bgpInvalidPeerRowStatus(5217),
|
|
bgpNetworkNotFound(5218),
|
|
bgpPeerGroupNotFound(5219),
|
|
bgpInvalidPeerGroupEnable(5220),
|
|
bgpInvalidPeerGroupRemoteAs(5221),
|
|
bgpInvalidPeerGroupDefaultOriginate(5222),
|
|
bgpInvalidPeerGroupUpdateSource(5223),
|
|
bgpInvalidPeerGroupEbgpMultiHop(5224),
|
|
bgpInvalidPeerGroupAdvertisementInterval(5225),
|
|
bgpInvalidPeerGroupPassword(5226),
|
|
bgpInvalidPeerGroupWeight(5227),
|
|
bgpInvalidPeerGroupNextHopSelf(5228),
|
|
bgpInvalidPeerGroupRoutePolicyIn(5229),
|
|
bgpInvalidPeerGroupRoutePolicyOut(5230),
|
|
bgpInvalidPeerGroupRouteReflectorClient(5231),
|
|
bgpInvalidPeerGroupSoftReconfigurationIn(5232),
|
|
bgpInvalidPeerGroupSoftReconfiguration(5233),
|
|
bgpInvalidPeerGroupRemovePrivateAs(5234),
|
|
bgpInvalidPeerGroupHoldTime(5235),
|
|
bgpInvalidPeerGroupKeepAlive(5236),
|
|
bgpInvalidPeerGroupRowStatus(5237),
|
|
bgpInvalidPeerGroupGroupName(5238),
|
|
bgpAggregateNotFound(5239),
|
|
bgpInvalidAggregateAsSetGenerate(5240),
|
|
bgpInvalidAggregateSummaryOnly(5241),
|
|
bgpInvalidAggregateSuppressPolicy(5242),
|
|
bgpInvalidAggregateAdvertisePolicy(5243),
|
|
bgpInvalidAggregateAttributePolicy(5244),
|
|
bgpOperationNotAllowedWhenBgpIsEnabled(5245),
|
|
bgpInvalidPeerHoldTime(5246),
|
|
bgpInvalidPeerKeepAlive(5247),
|
|
bgpInvalidPeerMaxPrefix(5248),
|
|
bgpInvalidPeerGroupMaxPrefix(5249),
|
|
bgpInvalidPeerMD5Authentication(5250),
|
|
bgpInvalidPeerGroupMD5Authentication(5251),
|
|
bgpInvalidPeerGroupIndex(5252),
|
|
bgpInvalidConfederationIdentifier(5253),
|
|
bgpInvalidConfederationPeerAsNumber(5254),
|
|
bgpInvalidConfederationPeerNotFound(5255),
|
|
bgpInvalidConfederationPeerAlreadyExist(5256),
|
|
bgpOperationNotAllowedWhenSoftReconfigInIsDisabled(5257),
|
|
bgpNotAllowedSoftRecfgInIsDisabledForTheGrpOrAnyPeerInGrp(5258),
|
|
bgpCanNotEnablePeerWithoutCfgRemoteAsForThePeer(5259),
|
|
bgpCanNotEnablePeerGrpWoCfgRemoteASPeerGrpOrAnyPeerInGrp(5260),
|
|
bgpOperationNotAllowedWhenPeerIsBGPON(5261),
|
|
bgpOperationNotAllowedWhenPeerGrpOrAnyPeerInGrpIsBGPON(5262),
|
|
bgpOperationNotAllowedExternalPeer(5263),
|
|
bgpOperationNotAllowedInternalPeer(5264),
|
|
asListNotFound(5265),
|
|
asListDuplicate(5266),
|
|
asListAsPathEntryNotFound(5267),
|
|
asListAsPathEntryDuplicate(5268),
|
|
asListInvalidModeOfAsPathEntry(5269),
|
|
asListInvalidAsRegularExpressionOfAsPathEntry(5270),
|
|
asListInvalidRowStatusOfAsPathEntry(5271),
|
|
communityListNotFound(5272),
|
|
communityListDuplicate(5273),
|
|
communityListCommunityPathEntryNotFound(5274),
|
|
communityListCommunityPathEntryDuplicate(5275),
|
|
communityListInvalidModeOfCommunityPathEntry(5276),
|
|
communityListInvalidValueOfCommunityEntry(5277),
|
|
communityListInvalidRowStatusOfCommunityEntry(5278),
|
|
bgpFeatureNotSupport(5279),
|
|
bgpMd5EnabledWithoutPasswd(5280),
|
|
bgpEnabledWithoutLocalAs(5281),
|
|
bgpAggregateAdvertisePolicyWithoutAsSet(5282),
|
|
bgpPeerHoldTimeLessThanKeepAliveTime(5283),
|
|
bgpCommListCommunityStringUsed(5284),
|
|
communityListModificationNotAllowed(5288),
|
|
bgpInvalidPeerGroupAsOverride(5289),
|
|
bgpInvalidPeerGroupAllowAsIn(5290),
|
|
bgpInvalidPeerAllowAsIn(5291),
|
|
bgpInvalidPeerAsOverride(5292),
|
|
extCommunityListNotFound(5293),
|
|
extCommunityListModificationNotAllowed(5294),
|
|
extCommunityListInvalidEntry(5295),
|
|
extCommunityListDuplicateMemberId(5296),
|
|
extCommunityListInfoAlreadyExists(5297),
|
|
extCommunityMemberNotFound(5298),
|
|
bgpPeerLimitExceeded(5299),
|
|
bgpPeerIpv6NotSupport(5301),
|
|
extComListCannotCreateWithoutRtOrSooConfig(5302),
|
|
extComListRtAssignedNumMustBeConfigured(5303),
|
|
extComListSooAssignedNumMustBeConfigured(5304),
|
|
sshEnableTrue(5501),
|
|
rsaKeyNotExist(5502),
|
|
dsaKeyNotExist(5503),
|
|
rsaKeyGenMiss(5504),
|
|
dsaKeyGenMiss(5505),
|
|
sshShutDownInProcess(5506),
|
|
sshInvalidPort(5507),
|
|
sshPortAlreadyInUse(5508),
|
|
sshPortReserved(5509),
|
|
sshAuthenticationNotEnabled(5510),
|
|
sshUnableToRetrieveGlobalData(5511),
|
|
sshDisabledRekeyCannotEnable(5512),
|
|
sshRsaKeySizeInvalid(5513),
|
|
sshDsaKeySizeInvalid(5514),
|
|
sshSpecifyAuthEncKexToEnableSsh(5515),
|
|
sshHostKeyGenInProgress(5517),
|
|
sshDisabledSshClientCannotEnable(5516),
|
|
invalidOperationOnWsmOrSamStg(5601),
|
|
invalidOperationOnWsmOrSamVlan(5602),
|
|
invalidOperationOnWsmOrSamPort(5603),
|
|
invalidOperationOnSamPort(5604),
|
|
commandValidOnlyIfMezzCardIsPresent(5703),
|
|
mplsInvalidRouterId(6109),
|
|
lacpInvalidAggrsysPrio(6501),
|
|
lacpInvalidAggrActorAdminKey(6502),
|
|
lacpInvalidAggrColMaxDelay(6503),
|
|
lacpInconsistentKey(6504),
|
|
lacpInvalidVal(6505),
|
|
lacpOutOfRangeKey(6506),
|
|
lacpPortNotAggregatable(6507),
|
|
lacpKeyModificationNotAllowedOnSltPort(6508),
|
|
vlacpTimeoutScaleRangeBetween3To10(6509),
|
|
lacpOtherPortsWithSameKey(6510),
|
|
vlacpOneofPortorMLTIdIsRequired(6511),
|
|
vlacpDuplicatePeerMacAddress(6512),
|
|
vlacpOutOfRangeMac(6513),
|
|
lacpSmltSysIdSyncIncomplete(6514),
|
|
vlacpOperationReqPortVlacpDis(6515),
|
|
lacpNotAllowedForSmlt(6516),
|
|
lacpCantCreateSmlt(6517),
|
|
macAddrHasBeenAddedToGlobalFilter(6526),
|
|
vlacpEtherTypeIsInvalid(6527),
|
|
lacpPortsWithSameKeyHaveLosslessMismatch(6528),
|
|
lacpAggregationMustBeDisabledToSetKeyToDefault(6529),
|
|
mirrorByPortNonExistingEntry(6711),
|
|
mirrorEntryNotExist(6712),
|
|
mirrorEntryExists(6713),
|
|
mirrorOneDestAllowed(6714),
|
|
mirrorPortInUse(6715),
|
|
miirorIpNotSupportRemoteVlanId(6716),
|
|
mirrorPortSameAsMirroringPort(6717),
|
|
mirrorPortInConflictWithVlanPort(6718),
|
|
mirrorPortInConflictWithMltPort(6719),
|
|
mirrorPortExistsInAnotherEntry(6720),
|
|
mirroringPortExistsInAnotherEntry(6721),
|
|
mirroredPortsNotConfigured(6722),
|
|
mirroringAndRemoteVlanMustMatch(6723),
|
|
mirroringPortMustExistOnRemoteVlan(6724),
|
|
mirroringMltIsNotPartOfRemoteVlan(6725),
|
|
mirroringVlanShouldHavePortsAssigned(6726),
|
|
mirroringVlanCannotBeRoutable(6727),
|
|
mirroringPortCannotBeBrouter(6728),
|
|
diagEntryWithRemoteMirrorExistsCannotAddIp(6729),
|
|
diagMonitorIpInSameSubnetAsLocalInterface(6730),
|
|
diagEntryWithMonitorIpInSameSubnetExists(6731),
|
|
diagVlanConfigNotAllowedForScopeSliceEntry(6732),
|
|
diagMltConfigNotAllowedForScopeSliceEntry(6733),
|
|
diagIpConfigNotAllowedForScopeSliceEntry(6734),
|
|
diagScopeCannotBeModifiedAfterCreation(6735),
|
|
diagMultipleInOrOutPortsNotAllowedForScopeSliceEntry(6736),
|
|
diagInAndOutPortsShouldBeOnSameSliceForScopeSliceEntry(6737),
|
|
diagOnly4ScopeSliceEntriesAllowedPerSlice(6738),
|
|
diagScopeSliceNotAllowedOnThisCard(6739),
|
|
diagMax2BothOrTxModeSliceEntriesForMultipleMirroringPorts(6740),
|
|
diagEntryMandatoryParmsNotEntered(6741),
|
|
diagEntryCannotModifyMonitorIsidOffset(6742),
|
|
diagEntryMaxMonitorIsidsReached(6743),
|
|
diagQosNotApplicableForRegularMirroring(6744),
|
|
diagCannotEnableEgressMirroringOnMoreThanOneIsid(6745),
|
|
diagMonitorIsidOffsetAlreadyInUse(6746),
|
|
diagMonitorByIsidTblAccessError(6747),
|
|
diagCantConfigNniFeAssociatedPortsAsIsidMirroringAndViceVersa(6748),
|
|
diagMirroringAndMonitoringSessionsCannotHaveSameIsidOffset(6749),
|
|
diagMirroringAndMonitoringSessionsCannotHaveSamePorts(6750),
|
|
diagCannotRemoveEntryMustHaveEitherEgressPortsOrMltConfigured(6751),
|
|
diagCannotConfigSamePortMltAndVlanForDifferentIsidOffsets(6752),
|
|
diagMltAssociatedWithMonitoringIsidCannotBeDeleted(6753),
|
|
diagEgressPortCannotBeMemberOfEgressMltAndViceVersa(6754),
|
|
diagCantConfigOnaDeviceNetworkPortAsIsidMirroringAndViceVersa(6755),
|
|
diagMonitoringEgressPortCannotBeMemberOfMltAndViceVersa(6756),
|
|
diagCannotConfigurePortMirroringWhenFlowMirroringIsConfigured(6757),
|
|
targetAddressMissing(6801),
|
|
testAlreadyRunning(6802),
|
|
invalidTargetAddress(6803),
|
|
invalidSourceAddress(6804),
|
|
controlEntryAlreadyExists(6805),
|
|
invalidIpAddressFormat(6806),
|
|
invalidDataRange(6807),
|
|
invalidIndex(6808),
|
|
entryDoesNotExist(6809),
|
|
controlEntryMaxLimitReached(6810),
|
|
maxRowOutOfRange(6811),
|
|
ipv6VlanDoesnotExist(7401),
|
|
ipv6InvalidInstance(7402),
|
|
ipv6InvalidParameter(7403),
|
|
ipv6AttrNotImplemented(7404),
|
|
ipv6EntryDuplicate(7405),
|
|
ipv6EntryNotExist(7406),
|
|
ipv6InvalidIdentifierLength(7407),
|
|
ipv6CircuitDoesNotExist(7408),
|
|
ipv6PortNotPowerRanger(7409),
|
|
ipv6InvalidInterfaceIdentifier(7410),
|
|
ipv6CannotChangeWhenAdminEnable(7411),
|
|
ipv6InvalidReasmMaxSize(7412),
|
|
ipv6InvalidReachableTime(7413),
|
|
ipv6InvalidPrefixLength(7414),
|
|
ipv6InvalidSendAdverts(7415),
|
|
ipv6InvalidMaxInterval(7416),
|
|
ipv6InvalidMinInterval(7417),
|
|
ipv6InvalidRetransmitTimer(7418),
|
|
ipv6InvalidDefaultLifeTime(7419),
|
|
ipv6InvalidCurHopLimit(7420),
|
|
ipv6InvalidManagedFlag(7421),
|
|
ipv6InvalidOtherConfigFlag(7422),
|
|
ipv6InvalidDadNsNum(7423),
|
|
ipv6InvalidPhysicalAddress(7424),
|
|
ipv6InvalidNetToPhysicalType(7425),
|
|
ipv6NeighborDuplicate(7426),
|
|
ipv6NeighborDoesNotExist(7427),
|
|
ipv6InvalidInvalidIpv6Addr(7428),
|
|
ipv6PrefixDuplicate(7429),
|
|
ipv6InvalidPrefix(7430),
|
|
ipv6InvalidInterfaceType(7431),
|
|
ipv6NexthopOrIndexReq(7432),
|
|
ipv6NexthopIsLinklocBothIndexHopReq(7433),
|
|
ipv6StaticRouteDistanceReq(7434),
|
|
ipv6StaticRouteDuplicate(7435),
|
|
ipv6StaticRouteInvalid(7436),
|
|
ipv6OspfInvalidRouterId(7437),
|
|
ipv6OspfNotSupported(7438),
|
|
ipv6OspfAreaDoesNotExist(7439),
|
|
ipv6OspfAlreadyExist(7440),
|
|
ipv6OspfInterfaceInvalid(7441),
|
|
ipv6OspfInterfaceExists(7442),
|
|
ipv6OspfInterfaceNotExists(7443),
|
|
ipv6OspfAreaAggregateEntryExists(7444),
|
|
ipv6OspfAreaAggregateEntryDoesNotExist(7445),
|
|
ipv6OspfInvalidAreaRangeMask(7446),
|
|
ipv6OspfAreaCannotModifyBackbone(7447),
|
|
tcpConnectTblPermittedStateIsDelete(7448),
|
|
ipv6InterfaceVlanNotFound(7449),
|
|
ipv6TunnelInterfaceDoesnotExist(7450),
|
|
ipv6TunnelNotImplemented(7451),
|
|
ipv6TunnelInvalidOperation(7452),
|
|
ipv6TunnelInvalidType(7453),
|
|
ipv6TunnelInterfaceAlreadyExist(7454),
|
|
ipv6TunnelRemAddrShldBeZero(7455),
|
|
ipv6VlanDoesNotMatchPreviousVlanid(7456),
|
|
ipv6UvifDoesNotExist(7457),
|
|
ipv6MldNotEnabled(7458),
|
|
ipv6MldInterfaceExists(7459),
|
|
ipv6MldInterfaceDoesNotExist(7460),
|
|
ipv6MldInvalidQueryInterval(7461),
|
|
ipv6MldInvalidVersion(7462),
|
|
ipv6MldInvalidMaxRespdelay(7463),
|
|
ipv6MldInvalidRobvar(7464),
|
|
ipv6MldInvalidLlqi(7465),
|
|
ipv6RedistributionInvalidOperation(7466),
|
|
ipv6InvalidMaxRouterAdvertInterval(7467),
|
|
ipv6InvalidMinRouterAdvertInterval(7468),
|
|
ipv6CannotSetSummaryAsFalseIfNotStubArea(7469),
|
|
ipv6CannotModifyStubMetricIfNotStubArea(7470),
|
|
ipv6GatewayMustBeOnMgmtInterface(7471),
|
|
ipv6OspfNbmaNbrAlreadyExist(7472),
|
|
ipv6OspfInterfaceNotNbma(7473),
|
|
ipv6OspfNbmaTunnelNot624(7474),
|
|
ipv6OspfNbmaNbrNotExist(7475),
|
|
cannotConfigureAddrWhichIsLinkLocal(7476),
|
|
addrEntryDoesNotExist(7477),
|
|
ipv6TunnelCannotHaveMoreThanOneAddr(7478),
|
|
cannotChangeAddressType(7479),
|
|
cannotConfigureNetAddr(7480),
|
|
invalidInetNetworkAndMask(7481),
|
|
cannotConfigureHostAddr(7482),
|
|
ipv6InterfaceIdCannotBeChanged(7483),
|
|
ipv6TunnelLocalAndRemoteIpAddressCannotBeSame(7484),
|
|
ipv6StaticRouteWrongNexthop(7485),
|
|
ipv6EuiInterfacePrefixCannotBeGreaterThan64(7486),
|
|
ipv6CircuitMcastFlagNotSet(7487),
|
|
ipv6MldProxyUnsupported(7488),
|
|
ipv6MtuChangeWhenIntfDisable(7489),
|
|
ipv6OspfNbmaNbrInvalidAddress(7490),
|
|
ipv6AddressAndPrefixSame(7491),
|
|
ipv6IncompatibleAddressTypeAndAddress(7492),
|
|
ipv6DadInProgressTryLater(7493),
|
|
ipv6InterfaceMismatch(7494),
|
|
ipv6StaticNeighborInterfaceNotPresent(7495),
|
|
ipv6RequiresSuperMezz(7496),
|
|
ipv6StaticRouteOnlyIfindexCannotConfigPref(7497),
|
|
ipv6StaticRouteRecursiveRouteNotSupported(7498),
|
|
ipv6TunnelLocalRemoteAddrPairAlreadyExists(7499),
|
|
ipv6DefaultRouteIncorrectMask(7500),
|
|
idInvalid(7501),
|
|
notExist(7502),
|
|
duplicate(7503),
|
|
nameInvalid(7504),
|
|
notenablemixedmlt(7505),
|
|
portconflictmixedmlt(7506),
|
|
cannotConfigureBothNetAndHostAddr(7510),
|
|
actInUse(7601),
|
|
actFieldTooMany(7602),
|
|
actPatternNotExist(7603),
|
|
actErrApplyStateTrue(7604),
|
|
actMaxPatternExceeded(7605),
|
|
aclActNotExist(7606),
|
|
aclTypeInvalid(7607),
|
|
aclDefActionInvalid(7608),
|
|
aclGlobActionInvalid(7609),
|
|
vlanInvalid(7610),
|
|
portInvalid(7611),
|
|
aclMltInvalid(7612),
|
|
aclInUse(7613),
|
|
aclInvalidState(7614),
|
|
aclActNotApplied(7615),
|
|
aclActVlanAttrSpecified(7616),
|
|
aclActPortAttrSpecified(7617),
|
|
aclPortBased(7618),
|
|
aclVlanBased(7619),
|
|
actNoAttributesConfigured(7620),
|
|
aclErrPortAlreadyInAcl(7621),
|
|
aclErrVlanAlreadyInAcl(7622),
|
|
aceAclIdInvalid(7623),
|
|
aceAclNotExist(7624),
|
|
aceInUse(7625),
|
|
aceMax(7626),
|
|
aceModeIllegal(7627),
|
|
aceDscpIllegal(7628),
|
|
aceDot1pIllegal(7629),
|
|
aceUnreachIllegal(7630),
|
|
acePoliceIllegal(7631),
|
|
aceAclInvlanPoliceNotAllLanes(7632),
|
|
aceInvalidAdminState(7633),
|
|
aceEgressQueueInvalid(7634),
|
|
aceEgressQueue1gInvalid(7635),
|
|
aceEgressQueue10gInvalid(7636),
|
|
aceEgressNNSCInvalid(7637),
|
|
acePoliceInvalidMode(7638),
|
|
aceAttrNotExistInAct(7639),
|
|
aceInsuffActionAttr(7640),
|
|
maxAceForSystem(7641),
|
|
aceValMoreThanActPatternLen(7642),
|
|
aceMltIndexIllegal(7643),
|
|
aceModeNotPermit(7644),
|
|
aceNotPermitIngress(7645),
|
|
aceParmNotDefault(7646),
|
|
aceAttrConflict(7647),
|
|
defaultIdnoCreate(7648),
|
|
defaultIdnoDelete(7649),
|
|
defaultIdnoModify(7650),
|
|
mltPortAclConflict(7651),
|
|
aceNoModeModify(7652),
|
|
aclNoAccept(7653),
|
|
aceDebugMirrorDisableToRemoveDest(7658),
|
|
aclDefActionControl(7659),
|
|
aclStateEnable(7660),
|
|
aclStateDisable(7661),
|
|
aceRedirectMaxLimit(7662),
|
|
aceRedirectNotConfigure(7663),
|
|
aceQosAction(7664),
|
|
aceSecurityAction(7665),
|
|
aceActionMaxCount(7666),
|
|
aceCountActionInvalid(7667),
|
|
aceLogActionInvalid(7668),
|
|
aceInoutPortAction(7669),
|
|
aceInoutVlanAction(7670),
|
|
aceAttListRange(7671),
|
|
acenoIpProtoAttr(7672),
|
|
aceEthVlanList(7673),
|
|
aceMask(7674),
|
|
aceL3L4Config(7675),
|
|
noFreeFilterMirrorIdAvail(7676),
|
|
etherTypeAttribFirst(7677),
|
|
actPatternWrongIpVersion(7678),
|
|
aclTypeCannotBeModified(7679),
|
|
aceInvalidOperMask(7680),
|
|
qosAceCannotHaveDenyMode(7681),
|
|
aceSrcMacInvalidAddr(7682),
|
|
aceNotAllowRemoveAllPortsAfterCreation(7683),
|
|
acePortEntryRequiresOnePortForCreation(7684),
|
|
acePortEntryAllowsOnlyOnePort(7685),
|
|
actIpAddressRangeNotSupported(7688),
|
|
aceEthVlanIdEntryCreationRequiresOperaiotnAndVlanId(7689),
|
|
aceEthVlanTagPrioEntryCreationRequiresOperAndTagPrio(7690),
|
|
aceInvalidOperMacMask(7691),
|
|
aceEthMacEntryCreationRequiresOperaiotnAndMacAddr(7692),
|
|
aceIpEntryCreationRequiresOperaiotnAndIpAddr(7693),
|
|
aclNoMultipleMirrorDest(7694),
|
|
aceProtoPortEntryCreationRequiresOperAndPort(7695),
|
|
entryOnlyAllowOnePortToBeSet(7696),
|
|
portInputFormatIsInvalid(7697),
|
|
operationMaskMustBeZeroWhenOperationIsNotMask(7698),
|
|
aceTcpFlagEntryCreationRequiresOperaiotnAndTcpFlag(7699),
|
|
qosPolicyLaneExist(7701),
|
|
qosPolicyLaneNotExist(7702),
|
|
qosPolicyPkRateInvalid(7703),
|
|
qosPolicySvcRateInvalid(7704),
|
|
qosPolicyLaneInvalid(7705),
|
|
qosPolicyValidAcesPresent(7706),
|
|
qosTxQSetQmaxInvalid(7707),
|
|
qosTxQSetQmaxChangeNotAllowed(7708),
|
|
qosTxQSetBalQInvalid(7709),
|
|
qosTxQSetHipriQInvalid(7710),
|
|
qosTxQSetLopriQInvalid(7711),
|
|
qosTxQSetMaxQExceed(7712),
|
|
qosTxQSetPortNotRMod(7713),
|
|
qosTxQSetQInvalid(7714),
|
|
qosTxQSetQNotAssign(7715),
|
|
qosTxQSetMinRateGtMaxrate(7716),
|
|
qosTxQSetQMaxAfter8Adjust(7717),
|
|
qosTxQSetPortFeIncompatibleQset64(7718),
|
|
qosTxQSetPortGbIncompatibleQset8(7719),
|
|
qosTxQSetModificationNotAllowed(7720),
|
|
qosTxQSetQLengthWredModNotAllowed(7721),
|
|
qosSvcRateInvalid(7765),
|
|
qosTxQSetQLengthWredModNotAllowed2(7766),
|
|
qosTxQSetQLengthZeroNotAllowed(7768),
|
|
qosTxQSetQLengthLessThanDefaultNotAllowed(7769),
|
|
qosTxQSetQCannotBeCreated(7770),
|
|
qosTxQSetQCannotBeDeleted(7771),
|
|
qosTxQSetWlanModificationNotAllowed(7772),
|
|
qosTxQSetDeleteNotAllowed(7773),
|
|
qosPolMinPeakSvcRate64M(7774),
|
|
qosShaperCannotExceedMaxShapeRateFor10GInterface(7775),
|
|
qosPolicerCannotExceedMaxPoliceRateFor10GInterface(7776),
|
|
ipv6InterfaceAdminDisabled(7802),
|
|
ipv6ForwadingDisabled(7803),
|
|
noVrrpLinkLocalAddressSpecified(7804),
|
|
vrrpLinkLocalAddressCannotBeChanged(7805),
|
|
vrrpInvalidGlobalAddress(7806),
|
|
invalidLinkLocalAddress(7807),
|
|
addressExistsOnVrrp(7808),
|
|
invalidVrrpAddressOwnerPriority(7809),
|
|
ipv6ValidLifeCanOnlyBeInfinityForInfinite(7810),
|
|
invalidVrrpPrefixEntry(7811),
|
|
vrrpPrefixExists(7812),
|
|
ipsecSpAlreadyExist(7813),
|
|
ipsecSpDoesNotExist(7814),
|
|
ipsecSaConfigChangeNotAllowedWhenPolicyIsEnabled(7815),
|
|
ipsecSaHashAndEncryptAlgorithmsCannotBeNull(7816),
|
|
ikeProfileAlreadyExists(7817),
|
|
ikeReachedMaxProfilesCannotCreateNewProfile(7818),
|
|
ikeProfileDoesNotExist(7819),
|
|
ikeCannotDeleteDefaultProfile(7820),
|
|
ikeCannotDeleteProfileInUse(7821),
|
|
ikePolicyAlreadyExists(7822),
|
|
ikePolicyNameShouldBeConfigured(7823),
|
|
ikePolicyExistWithSameName(7824),
|
|
ikePolicyLAddrIsNotConfigured(7825),
|
|
ikePolicyDoesNotExist(7826),
|
|
ikePolicyNameCannotBeChanged(7827),
|
|
ikePolicyCannotChangeAddrType(7828),
|
|
ikePolicyCannotChangeAuthMethod(7829),
|
|
ikePolicyPSKNotConfigured(7830),
|
|
ikeProfileInvalidEncryptKeyLen(7831),
|
|
ipsecSaAlreadyExist(7832),
|
|
ipsecSaDoesNotExist(7833),
|
|
ipsecSpSaLinkExist(7834),
|
|
ipsecSpSaLinkDoesNotExist(7835),
|
|
ipsecManualKeyingAlgoDetailMustBeConfigured(7836),
|
|
ipsecSpiValueShouldBeUnique(7837),
|
|
ipsecEncryptKeyInfoMustBeConfiguredWithAlgo(7838),
|
|
ipsecAuthKeyInfoMustBeConfiguredWithAlgo(7839),
|
|
ipsecSaRaddrEntryNotFound(7840),
|
|
ipsecSpAndInterfaceDoesNotExist(7841),
|
|
ipsecCannotModifySp(7842),
|
|
ipsecCannotModifySa(7843),
|
|
ipsecMismatchInterfaceAddrAndLaddrOrRaddr(7844),
|
|
ikeProfileAggressiveModeIsNotSupported(7845),
|
|
ikePolicyLAddrNotFoundOnInterface(7846),
|
|
ikePolicyLAddrAndRAddrCannotBeTheSame(7847),
|
|
ipsecInvalidEncKey(7848),
|
|
ipsecInvalidAuthKey(7849),
|
|
ipsecCannotSetEncryptAlgoAndKeyDetailWithAuthHeader(7850),
|
|
ipsecCannotLinkSaWithNullSpi(7851),
|
|
ipv6AddressCannotBeDeletedDueToUsageOfIpsecPolicyLaddrOrRaddr(7852),
|
|
ipsecMaxCountPolicyLinkedToInterfaceReached(7853),
|
|
ipsecMaxCountPolicyLinkedToSaReached(7854),
|
|
ipv6InvalidMask(7855),
|
|
ipv6InterfaceForwardingAlreadyEnabled(7856),
|
|
ipv6InterfaceForwardingAlreadyDisabled(7857),
|
|
ipv6Ospfv3VirtualLinkIpsecPolicyEnabledCannotModify(7859),
|
|
ipv6OspfV3VirtualLinkIpsecPolicyAttached(7860),
|
|
ipv6IpsecInvalidKeyString(7861),
|
|
ipv6ClipAddrPrefixNot128(7864),
|
|
ipv6ClipInterfaceExists(7865),
|
|
ipv6MaxNumberOfClipInterfacesReached(7866),
|
|
plsbInvalidIpv6SourceAddress(7867),
|
|
ipv6SourceAddressMustBeDeletedBeforeIpv6ClipDeletion(7868),
|
|
ipv6RedistributeEntryNotFound(7869),
|
|
virtualIstConfigNotAllowedOnIpv6Interface(7870),
|
|
ipv6PreferredLifeCannotBeGreaterThanValidLife(7871),
|
|
ipv6CannotDeleteVlanWithIpsecEnabled(7872),
|
|
ipv6CannotDeleteBrouterPortWithIpsecEnabled(7873),
|
|
insufficientResourcesIpv6IntfEnable(7874),
|
|
ipsecCannotLinkPolicyToSaWithPolicyDisable(7875),
|
|
ipsecCannotRemovePolicyInterfaceWithWrongDirection(7876),
|
|
ipsecCannotModifyDirectionOnIpsecEnabledInterface(7877),
|
|
ipsecCannotSetSrcPortDstPortForIcmpv6AndOspf(7878),
|
|
ipsecPolicyAndSaNameShouldBeAlphanumeric(7879),
|
|
ipsecInvalidPortNumber(7880),
|
|
ipsecUnsupportedAddressType(7881),
|
|
ipsecCannotDeletePolicyIfPolicySaLinkExist(7882),
|
|
ipsecPolicyAlreadyLinkedToOtherSa(7883),
|
|
ipsecCannotUnlinkPolicySaPairWithInterfaceLinked(7884),
|
|
ipsecCannotDeletePolicyAttachedToInterface(7885),
|
|
noIpv6AddrAssociatedWithPortOrNoVlanProvided(7886),
|
|
invalidVrrpVersion(7887),
|
|
cannotConfigureIpv4MappedIpv6AddrWithDotedDecimalFormat(7888),
|
|
ipv6MrouteHwUsageUseDefault(7889),
|
|
ipv6OspfAreaHasIpsecVirtualLinkAttached(7890),
|
|
configurationOfIpv4CompatibleIpv6AddrIsDeprecated(7891),
|
|
notAllowedtoChangeVrrpChecksumMethodForVrrpV2(7892),
|
|
ipsecMismatchBetweenPolicyLaddrAndRaddrType(7893),
|
|
ipsecCannotSetIpv4RaddrAndLaddrForIcmpv6AndOspfv3(7894),
|
|
ikePolicyLaddrAndRaddrTypeMismatch(7895),
|
|
ikePolicyLocalIpv4AddressNotConfigured(7896),
|
|
ipsecCannotSetIpv6RaddrAndLaddrForIcmp(7939),
|
|
ipsecCannotDeletePolicyWhenAdminEnable(7897),
|
|
ipsecCannotDeleteClipWhenIpsecPolicyAssociated(7898),
|
|
ipsecAuthAlgoNullNotSupported(14803),
|
|
ikeCannotChangeAuthMethodForEnabledPolicy(7899),
|
|
ikeUnsupportedAddressType(7900),
|
|
ikeCannotChangePeerNameForEnabledPolicy(7938),
|
|
ipfixStateAlreadyEnabled(8101),
|
|
ipfixStateAlreadyDisabled(8102),
|
|
ipfixInvalidSlotNumber(8103),
|
|
ipfixNotADPMSlot(8104),
|
|
ipfixInvalidActiveTimeout(8105),
|
|
ipfixInvalidAgingInterval(8106),
|
|
ipfixInvalidExportInterval(8107),
|
|
ipfixInvalidTemplateRefIntervalSec(8108),
|
|
ipfixInvalidTemplateRefIntervalPkts(8109),
|
|
ipfixCollectorNotConfigured(8110),
|
|
ipfixTwoCollectorAlreadyConfigured(8111),
|
|
ipfixOnlyUdpProtocolSupported(8112),
|
|
ipfixInvalidCollectorDestPort(8113),
|
|
ipfixInvalidHashPolynomialCoeff(8114),
|
|
ipfixInvalidHashPolynomialSeed(8115),
|
|
ipfixInvalidHashKeyId(8116),
|
|
ipfixInvalidSamplingRate(8117),
|
|
aceIpfixStateIllegal(8118),
|
|
tacacsIllegalIpAddress(8201),
|
|
tacacsIllegalPriority(8202),
|
|
tacacsMaxServersReached(8203),
|
|
tacacsRadiusEnabled(8204),
|
|
tacacsNoKeyGiven(8205),
|
|
tacacsSourceIpDisabled(8207),
|
|
tacacsServerNotConfigured(8209),
|
|
tacacsPrimaryServerAlreadyExists(8210),
|
|
tacacsBackupServerAlreadyExists(8211),
|
|
tacacsPrimaryServerIsConfiguredWithTheSameIp(8212),
|
|
tacacsBackupServerIsConfiguredWithTheSameIp(8213),
|
|
tacacsPppAuthNotSupported(8214),
|
|
tacacsPppAccountingNotSupported(8215),
|
|
tacacsInvalidSession(8216),
|
|
tacacsCannotConfigureMoreThanOneServer(8217),
|
|
isisPwdInvalid(8301),
|
|
isisKeyIdInvalid(8302),
|
|
isisPwdExists(8303),
|
|
isisNoKeyId(8304),
|
|
isisInvalidAuthType(8305),
|
|
isisCsnpIntInvalid(8306),
|
|
isisRxmtLspIntInvalid(8307),
|
|
isisRtrTypeInvalid(8308),
|
|
isisNetLenInvalid(8309),
|
|
isisSysidError(8310),
|
|
isisManAreaAddrToomany(8311),
|
|
isisManAreaError(8312),
|
|
isisNetEntryExists(8313),
|
|
isisSummAddrExists(8314),
|
|
isisSummAddrError(8315),
|
|
isisInvalidSubnetMask(8316),
|
|
isisEnabledOnInterface(8317),
|
|
isisCannotChangeMetricTypeFromWideToNarrow(8318),
|
|
isisInvalidCircType(8319),
|
|
isisSysIdInvalid(8320),
|
|
isisSysIdRuntimeChange(8321),
|
|
isisInvalidCircuitId(8322),
|
|
isisCircuitAlreadyExists(8323),
|
|
isisCircuitDoesNotExist(8324),
|
|
isisInvalidIntfIndex(8325),
|
|
isisLevelRouterDoesNotSupp(8326),
|
|
isisManAreaNotConfigured(8327),
|
|
isisL2OnlyNotSupported(8328),
|
|
isisPriorityOnlyForBcastType(8329),
|
|
isisMetricValueInvalidForNarrowType(8330),
|
|
isisL2onlyCircuitExists(8331),
|
|
isisMinLspIntGreaterThanMaxLspInt(8332),
|
|
isisMaxLspIntLessThanMinLspInt(8333),
|
|
isisPlsbNodeNicknameInvalid(8334),
|
|
isisPlsbInstanceAlreadyExists(8335),
|
|
isisOnePlsbInstanceAllowed(8336),
|
|
isisPlsbInstanceDoesNotExist(8337),
|
|
isisCannotDeletePlsbInstanceWithIsid(8338),
|
|
isisCannotDeletePlsbInstanceWithIsisInterface(8339),
|
|
isisOneVlanPerPlsbInstance(8340),
|
|
isisVlanDoesNotExist(8341),
|
|
isisVlanIsNotPlsb(8342),
|
|
isisInterfaceCannotConfigPlsb(8343),
|
|
isisPlsbInstanceNotExistOnInterface(8344),
|
|
isisPlsbInstancePt2ptOnly(8345),
|
|
isisPlsbL1Only(8346),
|
|
isisCannotDeleteVlanWithPlsb(8347),
|
|
isisPlsbNniPortCannotBeAccess(8348),
|
|
isisCannotEnableInterfaceWithoutPlsbInstance(8349),
|
|
isisSystemIdIsnotBasemac(8350),
|
|
isisPlsbInstanceNotConfigured(8351),
|
|
isisNicknameNotConfiguredForPlsbInstance(8352),
|
|
isisBvidNotConfiguredForPlsbInstance(8353),
|
|
isisSpfDelayInvalid(8354),
|
|
isisControlVlanDoesNotExist(8355),
|
|
cannotAddPortToMltWithIsisInterfaceOnBothPortAndMlt(8356),
|
|
cannotCreateIsisIntfOnPortWhichIsMemberOfMltWithIsisIntf(8357),
|
|
cannotCreateIsisIntfOnMltWhichHasPortMemberWithIsisIntf(8358),
|
|
isisSysidCannotBeMulticastAddress(8359),
|
|
deleteIsisInterfaceBeforeDeleteMlt(8360),
|
|
onlyFirst10PortOfLaneCanBeIsisInterface(8361),
|
|
narrowMetricNotSupportedInPlsbMode(8362),
|
|
isisCannotChangeSysIdDueToIsidEpIsEnable(8363),
|
|
isisCannotChangeNickNameDueToIsidEpIsEnable(8364),
|
|
isisCannotChangePlsbVlanDueToIsidEpIsEnable(8365),
|
|
isisBcastNotSupportedOverMlt(8366),
|
|
isisPortIsNotMemberOfPlsbVlan(8367),
|
|
isisMltIsNotMemberOfPlsbVlan(8368),
|
|
isisPlsbVlanDifferentFromDataVlan(8369),
|
|
isisOverloadOnStartUpOutOfRange(8370),
|
|
isisCannotChangeSysIdWhenNodalMepMipAssociatedToPlsbVlan(8371),
|
|
enablePerformTaggingBefPlsbIsisInterfAssociation(8372),
|
|
isisPlsbPrimaryVlanNotAdded(8373),
|
|
isisPlsbPrimaryVlanNotMatch(8374),
|
|
isisCannotUseMulticastAddress(8375),
|
|
isisCannotEnableIpIsis(8376),
|
|
isisPlsbPortConflictWithCvlan(8377),
|
|
isisPlsbMLTConflictWithCvlan(8378),
|
|
isisPlsbMLTISTConflictWithCvlan(8379),
|
|
isisSpbmBvlanNotAllowToRunSlpp(8380),
|
|
isisSpbmInvalidEtherType(8381),
|
|
isisMaxLspGenIntCannotBeLessThan30(8382),
|
|
cannotConfigureIsisRedistributionWhenSpbmDisabled(8385),
|
|
logicalIsisIntfCannotBeDeletedBeforeDeletingIsisIntf(8386),
|
|
logicalIsisIntfDestIpCannotBeModified(8387),
|
|
logicalIsisIntfDestIpCannotBeLocal(8388),
|
|
logicalIsisIntfDuplicateVids(8389),
|
|
logicalIsisIntfVidsCannotBeModified(8390),
|
|
logicalIsisIntfDoesNotExist(8391),
|
|
isisCircuitAlreadyExistsOnIsisLogicalTunnelIntfPort(8392),
|
|
isisCircuitAlreadyExistsOnIsisLogicalTunnelIntfMlt(8393),
|
|
isisCannotDeleteSpbmInstanceWithFaSmlt(8394),
|
|
isisNickNameConflictWithIpv6(8396),
|
|
nsnaNoRedVlan(8401),
|
|
nsnaRedVlanExists(8402),
|
|
nsnaGlobalEnabled(8403),
|
|
nsnaNoVlanColor(8404),
|
|
nsnaVlanHasColor(8405),
|
|
nsnaVlanNonEmpty(8406),
|
|
nsnaNoFilterForNsnaVlan(8407),
|
|
nsnaPortHasFilter(8408),
|
|
nsnaNoUplinkDhcpFilter(8409),
|
|
nsnaYellowSubnetNotSpecified(8410),
|
|
nsnaNoNsnasSubnet(8411),
|
|
nsnaMaxNsnasSubnet(8412),
|
|
nsnaNoSshDaemon(8413),
|
|
nsnaIncorrectGreenVlan(8414),
|
|
nsnaIncorrectUplinkVlan(8415),
|
|
nsnaIncorrectVoipVlan(8416),
|
|
nsnaPortIsEap(8417),
|
|
nsnaPortOperationNotAllowed(8418),
|
|
nsnaUnknownMac(8419),
|
|
nsnaExceedMaxNumEntry(8420),
|
|
nsnaStaticEntryExists(8421),
|
|
nsnaOperationNotAllowedOnMirroredPort(8422),
|
|
nsnaInvalidHelloInact(8423),
|
|
nsnaVlanFlushNotAllowed(8424),
|
|
nsnaNoUplinkVlans(8425),
|
|
nsnaVlanFilterRemapInProgress(8426),
|
|
nsnaVlansCannotBeDeleted(8427),
|
|
nsnaVlanCannotBeMadeGuestVlan(8428),
|
|
nsnaPortCannotBeConfiguredOnNonPrPorts(8429),
|
|
nsnaNotAllowedOnSmltPort(8431),
|
|
nsnaNotAllowedOnDhcpSnoopEnabledVlan(8442),
|
|
filterNotAllowedOnDhcpSnoopEnabledVlan(8443),
|
|
cfmNoParamChange(8501),
|
|
cfmDomainExists(8502),
|
|
cfmDomainDoesNotExists(8503),
|
|
cfmMaintenanceAssociationExists(8504),
|
|
cfmMaintenanceAssociationDoesNotExists(8505),
|
|
cfmChangeNotAllowedWhenEnabled(8506),
|
|
cfmMepExists(8507),
|
|
cfmMepDoesNotExists(8508),
|
|
cfmOperationNotAllowedWhenMepsExist(8511),
|
|
cfmMepInUse(8531),
|
|
cfmMaDomainNameFieldCannotBeEmptyForCreation(8535),
|
|
indexIsBeingUsedByOtherDomain(8536),
|
|
cfmAssnIndexCantBeZeroForCreation(8537),
|
|
indexIsBeingUsedByOtherMaAssn(8538),
|
|
cfmOperationNotAllowedWhenMasExistUnderMd(8539),
|
|
cfmDomainIndexCantBeZeroForCreation(8540),
|
|
cfmAssnDoesNotExist(8541),
|
|
cfmMepIdCannotBeNullForCreation(8542),
|
|
cfmMaAssnNameFieldCannotBeEmptyForCreation(8543),
|
|
pbtVlanCannotReassign(8552),
|
|
cfmMepCanNotEnableWhenCfmEtherTypeIsNotSet(8554),
|
|
invalidMepListInputFormat(8562),
|
|
invalidDmOrMaNameLength(8563),
|
|
mepIdMustBeANumber(8564),
|
|
maxNumOfMepEntriesExceeded(8565),
|
|
domainAlreadyAssociatedWithOtherTypeOfService(8567),
|
|
cfmCannotDeleteBeforeRemoveAssociation(8574),
|
|
cfmOperationNotAllowedWhenMipsExistUnderMd(8577),
|
|
invalidMipListInputFormat(8582),
|
|
invalidDmNameLength(8583),
|
|
cannotDeleteVlanWithMepAssociation(8586),
|
|
cfmLbmExceedMaxDataSizeLimit(8642),
|
|
plsbVlanMustUsePlsbStg(8646),
|
|
normalVlanCannotUsePlsbStg(8647),
|
|
cfmPlsbCanHaveOnlyOneStg(8648),
|
|
cfmInvalidName(8649),
|
|
sameLevelMepAlreadyAssignedToVlanOnSamePort(8670),
|
|
sameLevelMipAlreadyAssignedToVlanOnSamePort(8671),
|
|
cfmNodalMepOnPbtVlanNotAllowed(8687),
|
|
cfmCannotAddOrRemoveNodalMepsWhenMepListIsEmptyOrInvalid(8688),
|
|
cfmExceedMinCcmIntervalForNodalVlan(8689),
|
|
cfmMepAlreadyInUseWithOtherNodalVlan(8690),
|
|
cfmMepAlreadyInUseWithOtherServiceType(8691),
|
|
cfmNodalMipLevelOnPbtVlanNotAllowed(8692),
|
|
cfmCannotAddOrRemoveNodalMipsWhenMipListIsEmptyOrInvalid(8693),
|
|
cfmLbmCannotSpecifyBothDataAndFrameSize(8697),
|
|
cfmFrameSizeTooLargeForRmod(8698),
|
|
cfmFrameSizeTooLargeForRCmod(8699),
|
|
cfmNoServiceAssociatedWithMepOrMip(8720),
|
|
cfmMepNotReadyToSetLbm(8721),
|
|
cfmMepNotOkToSetReady(8722),
|
|
cfmMepNotReadyToSetLtm(8723),
|
|
cfmLbmExceedMaxMessagesLimit(8726),
|
|
cfmLbmTestPatternSizeError(8748),
|
|
mepListCannotHaveTwoMepsWithSameMdLevel(8754),
|
|
mipListCannotHaveTwoMipsWithSameMdLevel(8755),
|
|
vrfDoesNotExist(8901),
|
|
vrfAlreadyExists(8902),
|
|
vrfMaxRoutesCouldNotBeSet(8903),
|
|
vrfPortDoesNotBelongToSpecifiedVrf(8904),
|
|
vrfVlanDoesNotBelongToSpecifiedVrf(8905),
|
|
vrfLegacyPortCannotBeAddedToVlanAssociatedWithVrf(8906),
|
|
vrfInvalidVrfId(8908),
|
|
vrfOperationProhibitedForGrt(8909),
|
|
vrfOspfLimitExceeded(8910),
|
|
vrfRipLimitExceeded(8911),
|
|
vrfDhcpLimitExceeded(8912),
|
|
vrfVrrpLimitExceeded(8913),
|
|
vrfRipDoesNotExist(8914),
|
|
vrfOspfDoesNotExist(8915),
|
|
vrfNameInvalid(8916),
|
|
vrfNameDuplicate(8917),
|
|
vrfRipAlreadyExists(8918),
|
|
vrfOspfAlreadyExists(8919),
|
|
vrfCannotChangeAssociationInterfaceExists(8907),
|
|
vrfCannotAssociatePortInVlan(8920),
|
|
vrfCannotAddAssociatedPortToVlan(8921),
|
|
vrfCannotAssociateToVlanWithLegacyPorts(8922),
|
|
vrfCannotAssociateToLegacyPortForBrouter(8923),
|
|
vrfBgpDoesNotExist(8924),
|
|
vrfBgpAlreadyExists(8925),
|
|
vrfBgpLimitExceeded(8926),
|
|
vrfConfigNeedsMezz(8927),
|
|
invalidNextHopVrfName(8928),
|
|
vrfOperationNotAllowed(8931),
|
|
vrfPimLimitExceeded(8932),
|
|
vrfPimDoesNotExist(8933),
|
|
igapCannotBeEnabledOnNonGRTVlan(8934),
|
|
igapAuthCannotBeEnabledOnNonGRTVlan(8935),
|
|
igapAccntCannotBeEnabledOnNonGRTVlan(8936),
|
|
igapIsNotEnabled(8937),
|
|
vrfOperProhForMgmt(8938),
|
|
ripSrcAndDstProtoCannotBeSameWithinOneVrf(8939),
|
|
vrfMaxReached(8942),
|
|
vrfNameIsReserved(8943),
|
|
ipv4AndIpv6AddressOnSameInterfaceMustBelongToSameVrf(8944),
|
|
premierLicenseRequiredForMoreThan24VrfsConfiguration(8945),
|
|
vrfMsdpLimitExceeded(8946),
|
|
vrfMsdpDoesNotExist(8947),
|
|
vrfIsUsedAsNextHopVrfForRouteInAnotherVrf(8948),
|
|
khiInvalidMonitoringThresholdValue(9468),
|
|
slotNotROrRsModule(9469),
|
|
mplsRouterIdLdpRsvpEnabled(10001),
|
|
mplsInvalidDeleteOperation(10002),
|
|
mplsInvalidInterfaceState(10003),
|
|
mplsInterfaceNotExist(10004),
|
|
mplsInvalidInterfaceMtu(10005),
|
|
mplsExplicitPathInUse(10006),
|
|
mplsTunnelInUse(10007),
|
|
mplsTunnelNoDest(10008),
|
|
mplsTunnelResourceInUse(10009),
|
|
mplsMezzCardAbsent(10010),
|
|
mplsLdpNotReady(10011),
|
|
mplsRsvpNotReady(10012),
|
|
mplsRouterIdSetToZero(10013),
|
|
mplsInterfaceVlanNotFound(10014),
|
|
mplsPortNotRModule(10015),
|
|
mplsIpAddrInUse(10016),
|
|
mplsTunnelNotFound(10017),
|
|
mplsTunnelNotAllLspUp(10018),
|
|
mplsInvalidIndex(10019),
|
|
mplsExplicitPathExists(10020),
|
|
mplsExplicitPathHopExists(10021),
|
|
mplsExplicitPathIndexExists(10022),
|
|
mplsMaxIndex(10023),
|
|
mplsInvalidPathOptionIndex(10024),
|
|
mplsLspExists(10025),
|
|
mplsInvalidLspInstance(10026),
|
|
mplsLspNoName(10027),
|
|
mplsLspNoEPName(10028),
|
|
mplsLspEPNotFound(10029),
|
|
mplsConfigNeedsMezz(10030),
|
|
mplsExpPathIpv4AddrTypeOnly(10031),
|
|
mplsExpPathNoNameChange(10032),
|
|
mplsLspNoNameChange(10033),
|
|
mplsSrcIpNonLocal(10034),
|
|
mplsLspIndexUsed(10035),
|
|
mplsLspNameUsed(10036),
|
|
mplsLspNotActive(10037),
|
|
mplsTunnelSameSrcDest(10038),
|
|
mplsLspNotSameSrc(10039),
|
|
mplsLspNotSameDest(10040),
|
|
mplsTunnelNoALtPath(10041),
|
|
mplsTunnelCfgIngressOnly(10042),
|
|
mplsTunnelInvalidIndex(10043),
|
|
mplsEPInvalidIndex(10044),
|
|
mplsEPHopInvalidIndex(10045),
|
|
mplsResInvalidIndex(10046),
|
|
mplsInvalidLdpKeepAliveRange(10047),
|
|
mplsInvalidLdpHelloHoldTimeRange(10048),
|
|
ipInterfaceMustExistsBeforeEnablingMpls(10058),
|
|
ipvpnCreateFailed(10201),
|
|
ipvpnDeleteFailed(10202),
|
|
ipvpnAlreadyEnabled(10203),
|
|
ipvpnNotEnabled(10204),
|
|
ipvpnNotSupportedOnDefVRF(10205),
|
|
ipvpnSameRDConf(10206),
|
|
ipvpnInvRDConfOnDefVRF(10207),
|
|
ipvpnInvRDTypeNotSupported(10208),
|
|
ipvpnInvRTConfOnDefVRF(10209),
|
|
ipvpnInvRTTypeNotSupported(10210),
|
|
ipvpnSVCAllocFailed(10211),
|
|
ipvpnSVCILMAddFailed(10212),
|
|
ipvpnLiteSupportOnlyType1(10213),
|
|
ipvpnRDTypeNotSupportedWithLite(10214),
|
|
ipvpnSvcLblChngIfIpvpnDisabledInVRF(10215),
|
|
ipvpnSvcLblOptionAlreadySetInIpvpnVRF(10216),
|
|
ipvpnPeerRRLiteModeConflict(10217),
|
|
ipvpnPeerGroupRRLiteModeConflict(10218),
|
|
ipvpnImplicitReflectInMixedLiteMode(10219),
|
|
ipvpnInvalidPeerSetForAccessPeer(10220),
|
|
ipvpnRouterInNonLiteRRMode(10221),
|
|
ipvpnRouteTargetNotFound(10222),
|
|
bgpOperationNotAllowedWhenDefaultBgpIsEnabled(10223),
|
|
bgpOperationNotAllowedWhenVrfBgpIsEnabled(10224),
|
|
bgpInvalidLocalAsWhenVrfPeerRemoteAs(10225),
|
|
bgpInvalidVrfPeerRemoteAs(10226),
|
|
bgpInvalidVrfPeerGroupRemoteAs(10227),
|
|
ipvpnLiteRequiresVpnv4(10228),
|
|
ipvpnVpnv4DisableRequiresLiteDisable(10229),
|
|
ipvpnEnabledWithoutLocalAs(10230),
|
|
ipvpnInterVrfRedistEnable(10231),
|
|
bgpOperationNotAllowedWhenIpvpnIsEnabled(10232),
|
|
ipvpnInvalidAssignedNumber(10233),
|
|
ipvpnInvalidAsNumber(10234),
|
|
ipvpnInvalidPeerSetForExternalPeer(10235),
|
|
ipvpnInvalidPeerGroupSetForExternalPeer(10236),
|
|
ipvpnMaxRtPerVrfExceeded(10237),
|
|
ipvpnRdOverlapOperNotAllowed(10238),
|
|
ipvpnNotCreated(10239),
|
|
ipvpnAlreadyCreated(10240),
|
|
ipvpnLiteRequiresValidIpAddressInRd(10241),
|
|
ipvpnLiteOperationNotAllowedSameIpConfiguredAsRdInAnotherVrf(10242),
|
|
ipvpnRDInvalidCircuitlessIP(10243),
|
|
ipvpnRDIpNotLiteEnabled(10244),
|
|
ipvpnLiteSupportRDWithClipIp(10245),
|
|
ipvpnLiteSupportOnlyLiteEnabledRDIP(10246),
|
|
ipvpnEnableDisallowedWithoutValidRD(10247),
|
|
ipvpnLiteRDIpConfiguredInMultipleVrf(10248),
|
|
ipvpnIsidAlreadyExist(10249),
|
|
ipvpnBgpBasedOrTaggedPeerNotConfigured(10250),
|
|
ipvpnBothTypeOfIpvpnCreated(10251),
|
|
ipvpnBgpBasedAlreadyCreated(10252),
|
|
ipvpnTaggedPeerAlreadyCreated(10253),
|
|
ipvpnTaggedPeerIsidNotConfigured(10254),
|
|
ipvpnTaggedPeerIsidRuntimeChangeNotAllowed(10255),
|
|
ipvpnMvpnIsidRuntimeChangeNotAllowed(10256),
|
|
insufficientResourcesIpvpnEnable(10257),
|
|
customAutoNegAdvMacPauseNotSupported(10301),
|
|
customAutoNegAdvAsymPauseNotSupported(10302),
|
|
mirrorDestinationNotEntered(10306),
|
|
mirrorLegacyCannotSupportPortList(10307),
|
|
mirrorMltShouldHavePortsAssigned(10308),
|
|
mirrorDestinationNotAttached(10309),
|
|
mirrorDisableEntry(10310),
|
|
mirrorDestinationAlreadyAttached(10311),
|
|
lldpMedCapabilityTlvMandatory(10312),
|
|
mirrorLegacyCannotSupportVlanOrMlt(10313),
|
|
mirrorDestAlreadyAttachedOrDestSpecifiedNotAttached(10314),
|
|
noAdminSettingForSpeed1000(10330),
|
|
portAlwaysRunAt10GSpeed(10331),
|
|
rmodOnlyOneMirroredPortPerLaneForEgress(10332),
|
|
mirrorTxFilterModeNotAllowedOnRsmod(10333),
|
|
mirrorModeNotValidForRmodRSmod(10334),
|
|
portMirroringTxNotSupportForDiffservPort(10335),
|
|
invalidDiffServEnableDueToMirroring(10336),
|
|
invalidDiffServTypeDueToMirroring(10337),
|
|
cannotSetAdminSpeed1000AsPerIEEE(10338),
|
|
portMirroringNoMgidsAvailable(10363),
|
|
loopDetectNotAllowedOnIstPorts(10364),
|
|
loopDetectNotAllowedAlreadyEnabled(10365),
|
|
portPcapModeNotSupported(10366),
|
|
svcRateNeedsToBeSetToZeroWhenPeakIsSetToZero(10367),
|
|
peakRateNeedsToBeSetToZeroWhenSvcRateIsSetToZero(10368),
|
|
portCpLimitShutdownOnIstPortNotAllowed(10369),
|
|
portCustomAutoNegAdv1000HalfInvalid(10370),
|
|
cannotSetDuplexWhenSpeedIs1000(10371),
|
|
invalidAdminSpeedCannotDisableAutoneg(10372),
|
|
portOnly10GEPortsCanBeLossless(10374),
|
|
portIsConfiguredAsLossless(10375),
|
|
portIsConfiguredAsLosslessPfc(10376),
|
|
portIsL2Untrusted(10377),
|
|
portIsConfiguredAsIfPolicer(10378),
|
|
portLaneHasLosslessPort(10379),
|
|
portSliceHasLosslessPort(10380),
|
|
portAllMltPortsCannotBeMadeLossless(10381),
|
|
portConfigNotAllowedLacpKeyInMltIdRange(10383),
|
|
rmVlanIdNotSetForRMSPort(10384),
|
|
rmVlanListNotAllowedForRMS(10385),
|
|
slppTimeToClrPktRxCountNotConfigurable(10386),
|
|
portCannotBeConfiguredAsLosslessPfc(10387),
|
|
portMltListViolatesLosslessLaneLimit(10388),
|
|
portQosInvalidForLosslessPfc(10389),
|
|
portL3TrustedInvalidForLossless(10390),
|
|
portL2UntrustedInvalidForLossless(10391),
|
|
portNoLosslessChangeIfLacpEnabled(10392),
|
|
portMltOnly10GEPortsCanBeLossless(10393),
|
|
portAddOnly10GEPortsCanBeLossless(10394),
|
|
portMltIsConfiguredAsIfPolicer(10395),
|
|
portAddIsConfiguredAsIfPolicer(10396),
|
|
forcedRearpNotAllowedOnPortInterface(10397),
|
|
sharedPortConfigurationNotSupportedInThisRelease(10398),
|
|
brouterCannotBeAddedToIpSubnetOrIpProtocolVlan(10399),
|
|
cannotConfigPortTxFlowControlWhenFlowControlModeFlagDisabled(10400),
|
|
cfmCannotAbortWhenNoLtmInProgress(10442),
|
|
esmMltCannotBeNonUni(10443),
|
|
cfmCannotAbortWhenNoLbmInProgress(10446),
|
|
plsbVlanIsidNotAllowed(10459),
|
|
plsbVlanIsidAlreadyExist(10460),
|
|
plsbVlanIsidWithSingleBvlan(10461),
|
|
plsbSysidCannotBeSameAsIstPeerSysid(10462),
|
|
bgpInvalidPeerSetWhenVpnv4Enabled(10501),
|
|
bgpInvalidPeerGroupSetWhenVpnv4Enabled(10502),
|
|
bgpOverlappingAggregateAddress(10503),
|
|
bgpInvalidLocalAsWhenPeerRemovePrivateAsEnabled(10504),
|
|
bgpInvalidPeerRemovePrivateAsEnableWithoutRemoteAs(10505),
|
|
bgpInvalidPeerGroupRemovePrivateAsEnableWithoutRemoteAs(10506),
|
|
bgpDuplicatePeerNotAllowed(10507),
|
|
bgpPeerDoesNotBelongToPeerGroup(10508),
|
|
bgpOperationNotAllowedWhenRouteReflectorClientIsEnabled(10509),
|
|
bgpInvalidAggregateAdvertisePolicyWithoutAsSetGenerate(10510),
|
|
bgpInvalidPeerDefaultOriginateIpv6(10512),
|
|
bgpInvalidPeerGroupDefaultOriginateIpv6(10513),
|
|
bgpInvalidPeerIpv6Capability(10514),
|
|
bgpOperationNotAllowedForIpv6Peer(10515),
|
|
bgpOperationNotAllowedForIpv6PeerGroup(10516),
|
|
bgpOperationNotAllowedWhenOutboundMapsAreDifferent(10517),
|
|
bgpOperationNotAllowedWhenInboundMapsAreDifferent(10518),
|
|
maxPeerEntriesInPeerGroup(10519),
|
|
bgpOperationNotAllowedWhenNexthopSelfAreDifferent(10520),
|
|
bgpOperationNotAllowedWhenUpdateSourceAreDifferent(10521),
|
|
bgpOperationNotAllowedWhenRemovePrivateAsAreDifferent(10522),
|
|
bgpTransAsValueCannotBeUsed(10523),
|
|
bgpVrfPeerIpv6CapabilityNotSupported(10524),
|
|
bgpVrfDefaultOriginateIpv6NotSupported(10525),
|
|
plsbDeleteIntfBeforeSetPlsbFlag(10701),
|
|
plsbDeletePlsbInstanceBeforeSetPlsbFlag(10702),
|
|
plsbDeleteManualAreaBeforeSetPlsbFlag(10703),
|
|
plsbDeleteSummaryAddrBeforeSetPlsbFlag(10704),
|
|
plsbDisableIsisBeforeSetPlsbFlag(10705),
|
|
plsbDeletePlsbVlanBeforeSetPlsbFlag(10706),
|
|
plsbCannotConfigPlsbInNonplsbMode(10707),
|
|
commandValidOnlyIfInRmode(10708),
|
|
cannotAssociateMoreThan5000IsidToPlsbInstance(10709),
|
|
cannotEnablePlsbWithMmrpConfiguration(10711),
|
|
cannotHaveSameBvlanAsSpIpVlanRCModPort(10712),
|
|
cannotAddRcModPortsToMltWhenSpIpVlanSameAsBvlan(10713),
|
|
cannotConfigPlsbIsisSmltistIntfOnSameIntf(10714),
|
|
plsbDisableAllIsisEndpointsBeforeTogglePlsbState(10715),
|
|
cannotConfigPortInSmltOrIstForPlsbVlan(10716),
|
|
deleteStg63BeforeCreatingPlsbBvlan(10717),
|
|
only2PlsbBvlanSupported(10718),
|
|
plsbInvalidIpSourceAddress(10719),
|
|
plsbMustChangeNicknameAfterChangeSysid(10720),
|
|
plsbWhenEnableIstMustConfigSmltPeerBmac(10721),
|
|
cannotConfigPlsbIsisIntfOnSmlt(10722),
|
|
cannotConfigPlsbIsisIntfOnIstPort(10723),
|
|
plsbZeroSmltPeerBmacMustHaveZeroVirtualBmac(10724),
|
|
plsbZeroSmltPeerBmacMustHavePrimSplitBeb(10725),
|
|
plsbWhenSetVirtualBmacToZeroPeerBmacMustBeZero(10726),
|
|
plsbDeleteIsidFromVlanBeforeSetPlsbFlag(10727),
|
|
plsbIsidNotAllowedForVlanSpbmDisabled(10728),
|
|
plsb16777215IsWellKnownIsid(10729),
|
|
plsbConfigIpSourceAddrBeforeEnableIpSc(10730),
|
|
inUsedAsIsisIpSourceAddr(10731),
|
|
plsbCannotSetIpSourceAddrToZeroWhenIpScEnabled(10732),
|
|
spbMcConflictingCVlanIsid(10733),
|
|
spbMcConflictingVrfIsid(10734),
|
|
spbMcIsidInDynRange(10735),
|
|
spbmVlanSpbMcastCannotBeEnabledWithPim(10736),
|
|
spbmVlanSpbMcastCannotBeEnabledWithSnoop(10737),
|
|
vlanPimCannotBeEnabledWithSpbMcast(10738),
|
|
vlanSnoopCannotBeEnabledWithSpbMcast(10739),
|
|
spbmIntfCanBeConfiguredOn10gigPort(10740),
|
|
spbmIntfCanBeConfiguredOnMltWith10gigPort(10741),
|
|
spbMcastCannotBeEnabledWithPim(10742),
|
|
pimCannotBeEnabledWithSpbMcast(10743),
|
|
spbMcastCannotBeEnabledWithDvmrp(10744),
|
|
dvmrpCannotBeEnabledWithSpbMcast(10745),
|
|
spbmVlanSpbMcastCannotBeEnabledWithDvmrp(10746),
|
|
spbmVlanDvmrpCannotBeEnabledWithSpbMcast(10747),
|
|
spbmMltMemberAlreadyInSpbmBvlan(10748),
|
|
vlanSpbMcastCannotBeEnabledWithoutIpAddr(10749),
|
|
portSpbMcastCannotBeEnabledWithoutIpAddr(10750),
|
|
cmdNotAllowedInNonSpbmMode(10751),
|
|
spbmDeleteRedistributeBeforeResetSpbmFlag(10752),
|
|
spbmSmltVirtBmacCannotBeInChassisBmacRange(10753),
|
|
spbmSmltVirtBmacMustBeSetWhenPeerBmacIsNotZero(10754),
|
|
spbmAssociateVlanToSpbmInstBefCreation(10755),
|
|
spbmDeleteVlanBefDeassociateFromSpbmInst(10756),
|
|
spbmDeassociateVlanToSpbmInstBefCreation(10757),
|
|
cannotConfigSpbmIsisIntfOnMltPort(10758),
|
|
cannotConfigSpbmIsisIntfOnLacpPort(10759),
|
|
mustConfigTwoBvlanForSpbmSmlt(10760),
|
|
plsbWhenConfigIstMustConfigSmltPeerSysId(10761),
|
|
ipIsisInFilterIsidDuplicateEntry(10762),
|
|
ipIsisInFilterNickNameIsidDuplicateEntry(10763),
|
|
ipIsisInFilterIsidListDuplicateEntry(10764),
|
|
ipIsisInFilterNickNameIsidListDuplicateEntry(10765),
|
|
ipIsisInFilterNickNameEntryNotFound(10766),
|
|
ipIsisInFilterIsidEntryNotFound(10767),
|
|
ipIsisInFilterNickNameIsidEntryNotFound(10768),
|
|
ipIsisInFilterIsidListEntryNotFound(10769),
|
|
ipIsisInFilterNickNameIsidListEntryNotFound(10770),
|
|
ipIsisInFilterInvalidIsidListName(10771),
|
|
ipIsisInFilterIsidListNameNotFound(10772),
|
|
ipIsisInFilterCannotUseTransparentUniIsid(10773),
|
|
vrfIsisInstanceDoesNotExist(10774),
|
|
ipIsisInFilterNickNameDuplicateEntry(10775),
|
|
ipIsisIsidListDuplicateEntry(10776),
|
|
ipIsisIsidListEntryNotFound(10777),
|
|
ipIsisInvalidIsidListName(10778),
|
|
cannotRedistributeIfIsisEnabledForVrf(10779),
|
|
cannotAcceptForIsisIfRedistributeEnabledForVrf(10780),
|
|
ipIsisIsidListIsidCannotBeOwnIsid(10781),
|
|
ipIsisIsidUsedByIsidList(10782),
|
|
spbmBvlanOutOfRange(10783),
|
|
spbmNoVistNoSmltPeerSysId(10784),
|
|
spbmSetSmltPeerSysIdToZeroBeforeDeleteVist(10785),
|
|
ipIsisIsidUsedByAcceptPolicy(10786),
|
|
ipIsisCannotUseOwnNickNameAsAdvRtr(10787),
|
|
ipIsisCannotUseOwnIsidInAcceptPolicy(10788),
|
|
ipIsisCannotApplyForVrfWithIpvpnDisabled(10789),
|
|
spbmMaxNumOfIsisInterfReached(10790),
|
|
ipIsisIsidListCannotBeRemovedWhileInUse(10791),
|
|
ipIsisIsidListInternalError(10792),
|
|
ipIsisIsidNotFoundInIsidList(10793),
|
|
ipIsisIsidListCannotRemoveLastIsid(10794),
|
|
spbmDeleteBvlanBeforeSpbmInstDeletion(10795),
|
|
isisCircuitKeyTooLong(10796),
|
|
ipIsisInFilterRouteMapAlreadyAssigned(10797),
|
|
pimConfigsNotAllowedInSpbmConfigModeEnabled(10798),
|
|
spbmConfigsNotAllowedInSpbmConfigModeDisabled(10799),
|
|
ipIsisInFilterCannotUseSwitchedUniIsid(10800),
|
|
msdpInconsistentRowStatus(10801),
|
|
msdpInvalidRPAddress(10802),
|
|
msdpRPAddressNotLocalAddress(10803),
|
|
msdpPeerTableInvalidLocalAddress(10804),
|
|
msdpNotLocalAddress(10805),
|
|
msdpLocalAddressPeerEstablished(10806),
|
|
msdpPeerCreated(10807),
|
|
msdpInconsistentPeerRowStatus(10808),
|
|
msdpPeerNotFound(10809),
|
|
msdpInvalidConnectRetryPeriod(10810),
|
|
msdpHoldTimePeerEstablished(10811),
|
|
msdpInvalidHoldtimePeriod(10812),
|
|
msdpKeepAliveTimePeerEstablished(10813),
|
|
msdpPeerKeepAliveInvalid(10814),
|
|
msdpDataTTLInvalid(10815),
|
|
msdpEncapsulationTypeNotSupported(10816),
|
|
msdpPeerSARouteMapNameLenInvalid(10817),
|
|
msdpPeerSAFilterPolicyNotFound(10818),
|
|
msdpInvalidDescriptionLength(10819),
|
|
msdpInvalidSALimit(10820),
|
|
msdpInvalidMD5AuthStatus(10821),
|
|
msdpInvalidPeerSetWhenPeerIsEnabled(10822),
|
|
msdpInvalidPeerAddress(10823),
|
|
msdpInvalidMD5AuthPasswordLength(10824),
|
|
msdpInvalidASnumber(10825),
|
|
msdpPeerNotConfigured(10826),
|
|
msdpInvalidDefaultPeerRouteMapNameLength(10827),
|
|
msdpDefaultPeerRoutePolicyNotFound(10828),
|
|
msdpInvalidRedistributeRouteMapNameLength(10829),
|
|
msdpRedistributeRoutePolicyNotFound(10830),
|
|
msdpInvalidMeshGroupNameLength(10831),
|
|
msdpPeerAlreadyConfiguredInMeshGroup(10832),
|
|
msdpPeerNotFoundInMeshGroup(10833),
|
|
msdpInconsistentPeerAdminStatus(10834),
|
|
msdpInconsistentDefaultPeerStatus(10835),
|
|
msdpInconsistentRedistributeRowStatus(10836),
|
|
msdpInconsistentMeshGroupRowStatus(10837),
|
|
msdpInvalidPeerAddressInMeshGroup(10838),
|
|
msdpDefaultPeerAlreadyCreated(10839),
|
|
msdpPeerSAFilterNotFound(10840),
|
|
msdpGlobalGrpRedistributeNotFound(10841),
|
|
msdpPeerSAFilterAlreadyCreated(10842),
|
|
msdpGlobalGrpRedistributeAlreadyCreated(10843),
|
|
msdpInterfaceNotUp(10844),
|
|
msdpPeerConfigurePassword(10845),
|
|
msdpPeerControlCharNotAllowed(10846),
|
|
msdpPeerCannotDeleteNonExistingPasswd(10847),
|
|
msdpInvalidOrigIdAddress(10848),
|
|
msdpClipAddressNotLocalAddress(10849),
|
|
msdpOriginatorIdIsNotConfigured(10850),
|
|
msdpOriginatorIdCannotBeDelIfMsdpEnabled(10851),
|
|
msdpFeatureNotSupported(10852),
|
|
msdpOriginatorIdIsNotUniqueOnAllVrfs(10853),
|
|
msdpPeerNotUniqueOnAllVrfs(10854),
|
|
msdpPeerAddrIsLocalAddress(10855),
|
|
dhcpDhcpSnGlobalDisabled(11101),
|
|
dhcpPortBelongToDhcpSnDisabledVlan(11102),
|
|
dhcpPortBelongToDaiDsabledVlan(11103),
|
|
dhcpPortIsDhcpSnTrusted(11104),
|
|
dhcpPortIsDaiTrusted(11105),
|
|
dhcpIpsgEnabledOnDaiVlanMember(11106),
|
|
dhcpIpsgEnabledOnDaiUntrustedPort(11107),
|
|
dhcpMltPortDifferentDhcpSnType(11108),
|
|
dhcpMltPortDifferentDaiType(11109),
|
|
dhcpMltPortDifferentIpSourceGuardType(11110),
|
|
dhcpMltPortDifferentDhcpSnDaiType(11111),
|
|
dhcpIpsgEnabledOnSomePorts(11112),
|
|
dhcpIpsgEnabledOnDhcpSnVlanMember(11113),
|
|
dhcpIpsgEnabledOnDhcpSnUntrustedPort(11114),
|
|
dhcpSnoopingStaticBindingEntryExist(11120),
|
|
dhcpSnoopingStaticBindingEntryDoesNotExist(11121),
|
|
cannotChangeDhcpSnoopingDynamicBindingEntryIp(11122),
|
|
cannotChangeDhcpSnoopingDynamicBindingEntryInterface(11123),
|
|
dhcpSnoopingBindingCannotOnDhcpSnoopDisabledVlan(11124),
|
|
dhcpSameServerAgentAddress(11226),
|
|
dhcpDiffAgentAddress(11227),
|
|
cfmLbmFrameTooSmall(11401),
|
|
cfmLbmExceedsChassisMtu(11402),
|
|
cfmLbmExceedsUniPortMtu(11403),
|
|
cfmNodalMepIsNotSupportedOnESM(11408),
|
|
cfmNodalMipLevelIsNotSupportedOnESM(11409),
|
|
cfmLbmFrameSizeExceedMaxForNodalMep(11414),
|
|
cannotDeleteVlanWithNodalMipLevelAssociation(11416),
|
|
sameLevelNodalMepAlreadyAssignedToVlan(11417),
|
|
cfmMulticastCcmOnNodalPlsbMepNotAllowed(11422),
|
|
cfmNodalMepOnlyOnPlsbVlan(11424),
|
|
cfmNodalMipOnlyOnPlsbVlan(11425),
|
|
cfmNodalMpOnlyOnePerVlan(11426),
|
|
cfmCannotL2PingWhenLbmInProgress(11427),
|
|
cfmCannotLBMWhenL2PingInProgress(11428),
|
|
cfmCannotAbortWhenNoL2PingInProgress(11429),
|
|
cfmL2PingMepNotOkToSetReady(11430),
|
|
cfmVlanNotReadyToSetL2Ping(11431),
|
|
cfmL2PingExceedMaxMessagesLimit(11432),
|
|
cfmL2PingExceedMaxDataSizeLimit(11433),
|
|
cfmL2PingTestPatternSizeError(11434),
|
|
cfmL2PingFrameTooSmall(11435),
|
|
cfmL2PingFrameSizeExceedMaxForNodalMep(11436),
|
|
cfmCannotLTMWhenL2TraceInProgress(11437),
|
|
cfmCannotL2TraceWhenLTMInProgress(11438),
|
|
cfmCannotAbortWhenNoL2TraceInProgress(11439),
|
|
cfmL2TraceMepNotOkToSetReady(11440),
|
|
cfmVlanNotReadyToSetL2Trace(11441),
|
|
cfmL2CmdVlanNotFound(11442),
|
|
cfmL2TraceInvalidIsid(11443),
|
|
cfmNodalMipOnlyOnePerVlan(11447),
|
|
cfmNodalMepOnlyOnePerVlan(11448),
|
|
cfmMepMustBeEnabledForCmd(11449),
|
|
cfmSpbmVirtualNotSet(11450),
|
|
cfmSpbmVirtualNotPrimary(11451),
|
|
cfmL2IpPingIsNotOkToSetReady(11452),
|
|
cfmNotReadyToSetL2IpPing(11453),
|
|
cfmNotMemoryAllocatedForL2(11454),
|
|
cfmL2IpTraceIsNotOkToSetReady(11455),
|
|
cfmNotReadyToSetL2IpTrace(11456),
|
|
cfmIpLookupRouteFailed(11457),
|
|
invalidIpAddrType(11458),
|
|
cfmL2IpPingEntryMustCreatedFirst(11459),
|
|
cfmL2IpTraceEntryMustCreatedFirst(11460),
|
|
cfmCannotAbortWhenNoL2IpPingInProgress(11464),
|
|
cfmCannotSetTtlTo0(11465),
|
|
cfmTaskMsgQueueMemoryInsufficient(11467),
|
|
cfmRouterNameNotAllowedOnNonSpbmVlan(11468),
|
|
bfdMultiplierInvalidValue(11501),
|
|
bpduFilterTimerInvalidRange(11502),
|
|
bfdIsOnlySupportedOnGRTBgpPeer(11503),
|
|
bpduGuardTimerInvalidRange(11504),
|
|
multinetVlanDoesNotExist(11701),
|
|
multinetVlanPortMustBeTagged(11702),
|
|
multinetVlanHasIpSubnetVlanAssociated(11703),
|
|
multinetVlanAssignPortToMultipleIpMultinetVlan(11704),
|
|
multinetVlanCannotHaveLegacyPort(11705),
|
|
multinetVlanHasMltMember(11706),
|
|
multinetVlanCannotHaveBrouterPort(11707),
|
|
multinetVlanCannotBeModified(11708),
|
|
multinetAssoVlanCannotBeModified(11709),
|
|
multinetVlanOnPortBasedVlanOnly(11710),
|
|
multinetAssoVlanOnIpsubnetVlanOnly(11711),
|
|
qosMapExists(12501),
|
|
qosMapNotExist(12502),
|
|
qosMapDeleteUsedByFilter(12503),
|
|
qosMapDeleteDefaultMap(12504),
|
|
qosInvalidTagToQosTableQosLevel(12505),
|
|
qosInvalidDsFieldToQosTableQosLevel(12506),
|
|
qosInvalidQosToTagTableQosLevel(12507),
|
|
qosInvalidQosLevelValue(12508),
|
|
qosMapInvalidForLosslessPfc(12509),
|
|
qosMapPortQosInvalidForLosslessPfc(12510),
|
|
qosPortNoChangeAsEapIsEnabled(12517),
|
|
standbyIpSubnetNotSameAsMaster(12601),
|
|
standbyIpSubnetNotSameAsVirtual(12602),
|
|
standbyIpSameAsVirtual(12603),
|
|
masterIpSubnetNotSameAsStandby(12604),
|
|
masterIpSubnetNotSameAsVirtual(12605),
|
|
masterIpSameAsVirtual(12606),
|
|
cannotReadConfigSourceFile(12607),
|
|
cannotWriteConfigSourceFile(12608),
|
|
configFileInvalidPrefix(12609),
|
|
cpuSerialPortCommandNotAllowedOnSlave(12610),
|
|
ipv6InvalidInvalidIpv6AddrInterfaceId(12701),
|
|
ipv6ReasmMaxSizeExceedSysMtu(12702),
|
|
ipv6InvalidDescriptionLength(12703),
|
|
ipv6InvalidReasmSizeForMgmtPort(12704),
|
|
ipv6AddrCreatedByVirtualManagment(12705),
|
|
ipv6AndRelatedFeaturesNotSupported(12713),
|
|
ipv6RsmltTempDefRtDeleteModify(12706),
|
|
ipv6OspfAreaCannotModifyAreaType(12707),
|
|
ipv6OspfAreaSetToNssaForTransRole(12708),
|
|
ipv6OspfAreaHasActiveInterface(12709),
|
|
ipv6InterfaceMacOffsetCannotReset(12710),
|
|
ipv6InterfaceMacOffsetDiffSameVlan(12711),
|
|
ipv6InterfaceCannotModifyTunnelEntry(12712),
|
|
cantConfigIpv6AddressOfPrefixMoreThan64WhenIpv6ModeFlagDisable(12714),
|
|
conflictingIpv6PrefixPresent(12715),
|
|
linkLsaSuppressionOnlyForP2P(12716),
|
|
ipv6RipInterfaceDoesNotExist(12717),
|
|
ipv6InterfaceIsNotRunningRipng(12718),
|
|
ipv6RipExceedsMaxLimit256(12719),
|
|
ipv6RipExceedsMaxLimit4000(12720),
|
|
ipv6RipExceedsMaxLimit200(12721),
|
|
ipv6RipInterfaceAlreadyExists(12722),
|
|
ipv6RipInvalidHoldDownTimerValue(12723),
|
|
ipv6RipTimeoutIntervalMustBeGreaterThanUpdateTime(12724),
|
|
unsupportedConfigWithUrpfModeFlagDisabled(12725),
|
|
ipv6RipExceedsMaxLimit48(12726),
|
|
ipv6ZeroPrefixNotAllowed(12727),
|
|
ipv6PimSmltNotSupported(12728),
|
|
ipv6StaticRouteTunnelWithNonZeroNextHopNotSupported(12730),
|
|
unsupportedVlanId(12801),
|
|
invalidVlanIdError(12802),
|
|
vlanAdminStatusConfigNotAllowed(12803),
|
|
configNotAllowedOnVlanInterfaces(12804),
|
|
macSrcMacVlanReached(12805),
|
|
vlanCannotBeDeletedDueToEapAuthorizedPortMember(12806),
|
|
configNotAllowedMdNameUsed(12807),
|
|
configNotAllowedMaNameUsed(12808),
|
|
configNotAllowedCfmInUseOnVlan(12809),
|
|
configNotAllowedMdNameUsedByGlobalCfm(12810),
|
|
configNotAllowedMaNameUsedByGlobalCfm(12811),
|
|
configNotAllowedMepUsedByGlobalCfm(12812),
|
|
configCfmInternalOnVlan(12813),
|
|
configCfmGlobalEnabled(12814),
|
|
configCfmTracetreeNotAllowed(12815),
|
|
configCfmSmltNotAllowed(12816),
|
|
cfmSrcModeCannotBeNoVlanMacOnSpbmVlans(12817),
|
|
cfmL2McastTraceEntryMustBeCreatedFirst(12818),
|
|
cfmNotReadyToSetL2McastTrace(12819),
|
|
cfmMcastLookupRouteFailed(12820),
|
|
cfmCannotDeleteVlanWithCfmMsgInProgress(12821),
|
|
cfmCannotChangeMepWithCfmMsgInProgress(12822),
|
|
onlyGlobalCfmSupportForNonSpbmVlan(12823),
|
|
cfmInvalidMacToL2Trace(12824),
|
|
cfmInvalidNodalMipLevel(12825),
|
|
cannotModifyCfmEthertype(12826),
|
|
l2McastRequiresServiceType(12827),
|
|
needIsidAndIgmpSnoopVlanToL2Mcast(12828),
|
|
mustSpecifyMvpnEnabledVrfToL2Mcast(12829),
|
|
l2McastVlanDoesNotExist(12830),
|
|
l2TraceOnlyIpv4AddrTypeSupported(12831),
|
|
vlan4060To4084UsedInternally(12832),
|
|
l3VsnMaxReached(12833),
|
|
vlanInvalidSecondaryPrivateVlanId(12834),
|
|
vlanSecondaryVlanIdCannotEqualPrimaryPrivateVlanId(12835),
|
|
vlanSecondaryVlanAlreadyInUse(12836),
|
|
vlanPrimaryVlanAlreadyInUse(12837),
|
|
portMustBeTaggedIfPrivateTypeTrunk(12842),
|
|
portPrivateVlanTypeCannotBeNone(12844),
|
|
portCannotBeUntaggedIfPrivateTypeIsTrunk(12845),
|
|
mltPrivateVlanTypeCannotBeNone(12846),
|
|
mltCannotBeUntaggedIfPrivateTypeIsTrunk(12847),
|
|
onlyPrivateVlansAllowedOnThisInterface(12848),
|
|
privateIsolatedInterfaceMayOnlyBelongToOnePrivateVlan(12849),
|
|
vlanSecondaryVlanCannotBeChanged(12850),
|
|
privateVlanCannotChangeWhileInterfaceExists(12851),
|
|
cannotMakeInterfaceWithPrivateType(12852),
|
|
noIpEcmpForVrf(12853),
|
|
mltCannotSetDefaultPrivateTypeIfAssociatedWithPrivateVlan(12854),
|
|
cannotSetPrivateTypeIfLacpActive(12855),
|
|
cannotSetPrivateTypeIfPortIsSpbmNni(12857),
|
|
cannotSetEncapsulationIfLacpActive(12858),
|
|
portCannotSetDefaultPrivateTypeIfAssociatedWithPrivateVlan(12859),
|
|
cannotHavePortInVirtualIstVlan(12860),
|
|
virtualIstVlanMustHaveIsid(12864),
|
|
virtualIstVlanMustBelongToGlobalRouter(12865),
|
|
cannotDeleteVirtualIstVlan(12866),
|
|
cannotChangeIsidOnVirtualIstVlan(12867),
|
|
cannotChangeIpAddrOnVirtualIstVlan(12868),
|
|
virtualIstExists(12869),
|
|
smltVlanMustHaveIsid(12870),
|
|
cannotAddMltToVirtualIstVlan(12871),
|
|
nlbModeMulticastNotSupported(12872),
|
|
vlan4061To4084UsedInternally(12873),
|
|
privateVlanIsNotSupported(12874),
|
|
vlanNameHasBeenUsed(12875),
|
|
vlan4060To4084IsReservedForInternalUse(12876),
|
|
istLocalIpNotExist(12877),
|
|
cannotEnableMefUniFaOnPrivateVlanType(12878),
|
|
cannotSetPrivateVlanTypeForSwitchedUniFaPortOrMlt(12879),
|
|
cannotConfigStaticMacAddrOnFlexUniFaPortOrMlt(12880),
|
|
systemRequiresLicenseInstalledToCreateVlan(12881),
|
|
vlanCannotBeDeletedDueToEapFOVEnabledPort(12884),
|
|
vlanCannotBeDeletedDueToEapGVEnabledPort(12885),
|
|
vlanNlbNeedsToBeDisabledBeforeChangingNlbModeToUnicast(12886),
|
|
vlanNlbNeedsToBeDisabledBeforeChangingNlbModeToMulticast(12887),
|
|
trafficClassesAreAlwaysEnabledAndDisbaleIsNotAllowed(12888),
|
|
featureGmrpIsNotSupported(12889),
|
|
aceIpDscpInvalidSetting(12901),
|
|
aceIpDscpEntryCreationRequiresOperationAndDscpSetting(12902),
|
|
aceEthPortEntryCreationRequiresOperAndPort(12903),
|
|
aceEthTypeEntryCreationRequiresOperAndEtherType(12904),
|
|
aceEtherType8100NotAllowed(12905),
|
|
filterEntryWithMonitorIpInSameSubnetExists(12906),
|
|
filterCannotHaveCommaSeparatedValues(12907),
|
|
filterAceTooManyArguments(12908),
|
|
filterAceInvalidToAndFromArguments(12909),
|
|
filterAceTooManyVlanIds(12910),
|
|
filterCannotModifyAclPktType(12911),
|
|
filterAclPktTypeInvalid(12912),
|
|
filterCannotConfigureMonitorIpForIpv6pkt(12913),
|
|
filterCannotConfigureIpForIpv6Pkt(12914),
|
|
filterCannotConfigureArpForIpv6Pkt(12915),
|
|
filterCannotConfigureIpv6ForNonipv6Pkt(12916),
|
|
ipv6NextHdrIsNotSetForAce(12917),
|
|
aceEntryCreateRequiresOperAndIpv6Addr(12918),
|
|
aceEntryCreateRequiresOperAndNextHdrVal(12919),
|
|
aceEntryCreateRequiresOperAndTrafficClassVal(12920),
|
|
filterInvalidEtherTypeForIpv6Pkt(12921),
|
|
filterOperatorNotSupported(12922),
|
|
filterProtocolAttrConfiguredCannotModifyIpAttr(12923),
|
|
filterCannotConfigureIpfixForIpv6pkt(12924),
|
|
aceEtherTypeIpv6NotAllowed(12925),
|
|
filterCannotConfigureIcmpAttributeOnEgressTrafficIn4k(12926),
|
|
filterInvalidAceId(12927),
|
|
filterAclIpv6PacketTypeNotSupported(12928),
|
|
monitorDestVlanNotAllowedInOutPortTypeAclFilter(12929),
|
|
monitorDestPortNotAllowedInOutPortTypeAclFilter(12930),
|
|
monitorDestMltNotAllowedInOutPortTypeAclFilter(12931),
|
|
filterRemoveTagNotSupportedForPermitOption(12932),
|
|
monitorDstIsidNotAllowedInOutportTypeAcl(12933),
|
|
onlyOneMonitorDstIsidSupportedInDevice(12934),
|
|
filterQosAndRemoveTagCanBeSetOnlyForMonitorIsidAction(12935),
|
|
removeTagConfigMustBeSameForGivenIsidOffsetAcrossAclAceConfig(12936),
|
|
cannotConfigureFlowMirroringWhenPortMirroringIsConfigured(12937),
|
|
lldpVlanDoesNotExist(13001),
|
|
lldpPortNotVlanMember(13002),
|
|
lldpMstpProtocolAllowedOnlyInMstpMode(13009),
|
|
lldpRstpProtocolAllowedOnlyInRstpMode(13010),
|
|
lldpInvalidProtocol(13011),
|
|
lldpOneSpanningTreeProtocolAllowed(13012),
|
|
lldpPortNotOperatingInMstpMode(13013),
|
|
lldpPortNotOperatingInRstpMode(13014),
|
|
lldpPortNotOperatingInStpCompatibleMode(13015),
|
|
lldpCannotSetReinitDelay(13016),
|
|
lldpCannotSetNotificationInterval(13017),
|
|
lldpCannotSetTxDelay(13018),
|
|
lldpCannotSetPortConfigAdminState(13019),
|
|
lldpCannotSetPortConfigNotification(13020),
|
|
lldpCannotSetPortConfigTlvsTxExplicitly(13021),
|
|
lldpOnlySupportsTxAndRxMode(13022),
|
|
cannotEnableCDPOnFAEnabledPort(13023),
|
|
cannotDisableLLDPOnFAEnabledPort(13024),
|
|
faZeroTouchClientTypeNotSupported(13025),
|
|
faZeroTouchClientEntryAlreadyExists(13026),
|
|
faZeroTouchClientEachTypeMayOneHaveOneIsid(13027),
|
|
faZeroTouchClientIsisAlreadyUsedOrReserved(13028),
|
|
faZeroTouchClientOnlySupportsUntagged(13029),
|
|
faCannotCreateFaOnSmltWithoutSpbmInstance(13039),
|
|
faCannotExistFaOnSmltWithoutSpbmInstance(13040),
|
|
wlanVlanUsedByRemoteVlan(13101),
|
|
wlanCannotReserveVlanIdUsedByLocalVlan(13102),
|
|
wlanCannotRemoveUsedVlanFromReservationPool(13103),
|
|
wlanInvalidMtTunnelHoldUpTime(13104),
|
|
stgInUseByWlan(13105),
|
|
wlanCannotChangeRemoteVlanStgWhenRvlanCreated(13106),
|
|
wlanInterfaceIpMustBeCircuitlessIp(13107),
|
|
wlanOnlySupportIpv4(13108),
|
|
wlanCannotChangeInterfaceIpWhenWlanEnabled(13109),
|
|
wlanCannotChangeTcpUdpBasePortWhenWlanEnabled(13110),
|
|
wlanAlreadyEnabled(13111),
|
|
wlanAlreadyDisabled(13112),
|
|
wlanCannotEnableWithoutMaInitialized(13113),
|
|
wlanCannotEnableWithoutSettingInterfaceIp(13114),
|
|
wlanCannotEnableWithoutSettingTcpUdpBasePort(13115),
|
|
wlanCannotEnableWithoutSettingRemoteVlanStg(13116),
|
|
wlanInterfaceIpAlreadySetToTheSame(13117),
|
|
wlanVlanReserved(13118),
|
|
wlanControllerIpAlreadyExists(13119),
|
|
wlanControllerIpUpperLimitReached(13120),
|
|
wlanCannotDeleteActiveController(13121),
|
|
wlanControllerIpDoesNotExists(13122),
|
|
wlanMobilityVlanMappingAlreadyExists(13123),
|
|
wlanLocalVidUsedByAnotherMobilityVlanMapping(13124),
|
|
wlanLocalVidUsedByAnotherRemoteVlan(13125),
|
|
wlanCannotUseLocalVidAlreadyAllocated(13126),
|
|
wlanMobilityVlanMappingDoesNotExists(13127),
|
|
wlanCannotEnableSmltWithoutSettingSmltDataIp(13128),
|
|
wlanCannotEnableSmltWithoutSettingSmltTcpUdpBasePort(13129),
|
|
wlanSmltAlreadyEnabled(13130),
|
|
wlanSmltAlreadyDisabled(13131),
|
|
wlanSmltCannotEnableWhenSmltDisabled(13132),
|
|
wlanSmltCannotEnableWhenWlanDisabled(13133),
|
|
wlanCannotDisableWhenWlanSmltEnabled(13134),
|
|
cannotDisableSmltWhenWlanSmltEnabled(13135),
|
|
wlanVlanUsedByLocalVlanId(13136),
|
|
wlanControllerIdIsAlreadyInUse(13137),
|
|
wlanControllerIdDoesNotMatch(13138),
|
|
wlanCannotEnableWlanWithSpbmEnabled(13139),
|
|
plsbCannotEnableSpbmWithWlanEnabled(13140),
|
|
wlanCannotEnableInRstpMode(13141),
|
|
inUseAsWlanInterfaceIpAddr(13142),
|
|
wlanVlanMappingNameIsInvalid(13143),
|
|
invalidMstiInstance(13144),
|
|
wlanMgmtInterfaceAlreadySetToTheSame(13145),
|
|
wlanMgmtInterfaceMustBeOneOfTheIpInterface(13146),
|
|
wlanInvalidRemoteVlanStg(13147),
|
|
wlanLvidCannotBeZero(13148),
|
|
rcBridgeNewFdbTableHasBeenDeprecated(13149),
|
|
wlanCannotCreateVlanMappingWithoutL3mobilityAndLvid(13150),
|
|
wlanCannotDeleteOrChangeLearnedVlanMappingEntry(13151),
|
|
wlanCannotChangeVlanMappingL3mobility(13152),
|
|
wlanWeightCannotBeZero(13153),
|
|
wlanOnlyCanEnableBothWlanAndSpbmInPrivMode(13154),
|
|
wlanCannotSetWlanAndNlbOnVlan(13155),
|
|
wlanCannotSetL3MobilityToClient(13156),
|
|
wlanCannotDeleteLastController(13157),
|
|
wlanCannotEnableWlanWithoutController(13158),
|
|
wlanCannotReserveVlanWithoutSettingRemoteVlanStg(13159),
|
|
wlanCannotDeleteCLientVlanMap(13160),
|
|
wlanCannotClearRemoteVlanStgWhenReservedVlan(13161),
|
|
wlanCannotEnabledWithoutControlWlanEnable(13162),
|
|
wlanCannotModifyLearnedVlanMappingEntry(13163),
|
|
wlanCannotModifyWeightOfClientVlanMappingEntry(13164),
|
|
vspTalkIpInterfaceNotFound(13201),
|
|
vspTalkDnsNotConfigured(13202),
|
|
vspTalkInvalidMessageGroup(13203),
|
|
vspTalkNotEnabled(13204),
|
|
vspTalkMessageGroupNotExist(13205),
|
|
vspTalkMessageGroupAlreadyEnabled(13206),
|
|
vspTalkUsernameRequiredForPassword(13207),
|
|
vspTalkMessageGroupAlreadyExists(13208),
|
|
vspTalkCannotDeleteEnabledMessageGroup(13209),
|
|
vspTalkPasswordCannotBeAllNumeric(13210),
|
|
vspTalkIpAddressMustBeDeletedFirst(13211),
|
|
incorrectPoeGroupIndex(13305),
|
|
interfaceIsNotPoePort(13306),
|
|
deviceIsNotPoeDevice(13307),
|
|
loopDetectMustBeEnabledBeforeEnableArpDetect(13308),
|
|
untagPortCannotHaveMoreThanOneInterface(13309),
|
|
noPluggableOpticalModule(13310),
|
|
noPluggableOpticalModuleFortyG(13311),
|
|
notChannelizablePort(13312),
|
|
notChannelizableBasePort(13313),
|
|
adminSpeedOnlyCanBeSetTo100Mbps(13315),
|
|
autoNegotiationAdvertisement10GbFullNotSupported(13316),
|
|
autoNegotiationAdvertisement10MbNotSupported(13317),
|
|
autoNegAdvNoneCannotBeCombinedWithOtherOptions(13318),
|
|
portNotPresent(13319),
|
|
autoNegAdvertisement100MbHalfNotSupported(13320),
|
|
autoNegAdvert100MbFullNotSupportedWithMacsecEnabled(13321),
|
|
qosIngressRateLimitingCanNotExceedPortCapability(13322),
|
|
qosEgressShaperRateCanNotExceedPortCapability(13323),
|
|
autoNegAdvertisement10MbHalfNotSupported(13324),
|
|
autoNegAdvertisement10MbFullNotSupported(13325),
|
|
autoNegAdvertisement1000MbHalfNotSupported(13326),
|
|
portLicenseRequiredToEnableThisPort(13327),
|
|
duplicateSflowCollectorIp(13328),
|
|
sflowAgentIpDoesNotExistInMgmtRouterOrGlobalRouterVrf(13329),
|
|
sflowCollectorIpCannotBeLocal(13330),
|
|
cannotRemoveAgentIpWhenSflowIsEnabled(13331),
|
|
cannotEnableSflowWhenAgentIpIsZero(13332),
|
|
agentIpAddrMandatory(13401),
|
|
slamonInvalidAgentStatusValue(13402),
|
|
slamonInvalidTimeoutValue(13403),
|
|
slamonInvalidUdpPort(13404),
|
|
slamonInvalidServerPort(13405),
|
|
slamonAgentSupportedAddrTypeIsOnlyIpv4(13406),
|
|
slamonServerSupportedAddrTypeIsOnlyIpv4(13407),
|
|
slamonInvalidAgentIpAddr(13408),
|
|
slamonInvalidAgentCliAvailableStatusValue(13409),
|
|
slamonInvalidAgentCliTimeoutModeValue(13410),
|
|
slamonAltServerSupportedAddrTypeIsOnlyIpv4(13411),
|
|
slamonInvalidServerIpAddr(13412),
|
|
slamonInvalidAltServerIpAddr(13413),
|
|
slamonAgentDisableAgentStatus(13414),
|
|
slamonAgentPortAlreadyInUse(13415),
|
|
slamonAgentIpAlreadyInUse(13416),
|
|
slamonInstallCertRequiresCertFile(13417),
|
|
slamonCantOpenCertFile(13418),
|
|
slamonCantSyncCertFile(13419),
|
|
slamonCantInstallCertFile(13420),
|
|
slamonAgentAddressRequired(13421),
|
|
slamonInvalidCertFile(13422),
|
|
slamonAgentPortCollision(13424),
|
|
slamonAgentAddressNotChangeable(13425),
|
|
slamonAgentAlreadyEnabled(13426),
|
|
slamonAgentIpAddressMustBeDeletedFirst(13427),
|
|
slamoncertfilenotfound(13423),
|
|
isidAlreadyExists(13501),
|
|
isidDoesNotExist(13502),
|
|
operationNotAllowedOnTransparentUniInterface(13503),
|
|
transparentUniOperationNotAllowedOnCvlanIsid(13504),
|
|
transparentUniPortsCannotBeAddedToMlt(13505),
|
|
transparentUniInterfaceCannotBeCofiiguredOnBrouter(13506),
|
|
transparentUniCannotBeConfiguredOnIsisInterface(13507),
|
|
portsPartOfMltCannotBeAddedToTransparentUni(13508),
|
|
portOperationsNotAllowedOnTransparentUniInterface(13509),
|
|
vrfConfigurationNotAllowedOnTransparentUniInterface(13510),
|
|
stpOperationNotAllowedOnTransparentUniInterface(13511),
|
|
vlanCannotAddTransparentUniMembers(13512),
|
|
ipConfigurationNotAllowedOnTransparentUniInterface(13513),
|
|
vrrpConfigurationNotAllowedOnTransparentUniInterface(13514),
|
|
isisConfigurationNotAllowedOnTransparentUniInterface(13515),
|
|
isidAlreadyExistsForTransparentUniInterface(13516),
|
|
eapolNotAllowedOnTransparentUniInterface(13517),
|
|
eapolEnabledPortsCannotBeTransparentUniPort(13518),
|
|
slppEnabledPortsCannotBeTransparentUniPort(13519),
|
|
portPartOfVrfCannotBeTransparentUniPort(13520),
|
|
privateVlanConfigNotAllowedOnTransparentUniInterface(13521),
|
|
transparentUniOperationNotAllowedOnIpVpnIsid(13523),
|
|
transparentUniMltCannotBeDeleted(13522),
|
|
lacpEnabledPortsCannotBeTransparentUni(13524),
|
|
cannotConfigureLacpOnTransparentUniInterface(13525),
|
|
removeVlanFromPortsBeforeAddingToTransparentUni(13526),
|
|
ipSpoofDetectNotAllowedOnTransparentUniInterface(13527),
|
|
invalidIsidMacLimitLearningValue(13528),
|
|
cannotConfigTransparentUniPortForSwitchedUniPort(13529),
|
|
cannotEnableMefUniOnFaEnabledPort(13530),
|
|
cannotAddMltPortToSwitchedUniPort(13531),
|
|
switchedUniPortsCannotBePartOfAnyVlan(13532),
|
|
brouterPortsNotAllowedOnSwitchedUniInterface(13533),
|
|
cannotEnableSpanningTreeOnMefUniEnabledOrFaPorts(13534),
|
|
cannotDisabeEncapsulationOnSwuniOrFaMlt(13535),
|
|
cannotDeleteMefUniEnabledMlt(13536),
|
|
cannotAddSwitchedUniPortToMlt(13537),
|
|
switchedUniMltCannotBePartOfAnyVlan(13538),
|
|
cannotConfigTuniMltForSwuniMlt(13539),
|
|
cannotConfigSwuniMltIfFaEnableOnMlt(13540),
|
|
cannotDisableMefUniIfEndpointAlreadyCreated(13541),
|
|
cannotDisabeEncapsulationOnSwuniOrFaPort(13542),
|
|
cannotConfigSwitchedUniInOtherMode(13543),
|
|
cannotConfigSwitchedUniMltInOtherMode(13544),
|
|
slppAllowedOnSuniPortOnlyPlatformVlanAssociateIsid(13545),
|
|
cannotEnableFaOnMefUniPort(13546),
|
|
cannotEnableFaOnMefUniMlt(13547),
|
|
mefUniMustBeEnabledBeforeCreatingEndpoint(13548),
|
|
endPointAlreadyExists(13549),
|
|
onlyPortBasedVlanToSwitchedUniIsid(13550),
|
|
endPointDoesNotExist(13551),
|
|
notAllowToDeleteEndPointForDiscoverIsidOriginType(13552),
|
|
notAllowToDeleteDiscoverEndpointsForConfigIsidOriginType(13553),
|
|
cannotDeleteDiscoverTypeIsid(13554),
|
|
cannotSetBpduIfEndpointNotExist(13555),
|
|
cannotConfigSwitchedUniPortForDiffCvidSameIsid(13556),
|
|
cannotConfigSwitchedUniMltForDiffCvidSameIsid(13557),
|
|
cannotConfigSameEndpointInMoreThanOneIsid(13558),
|
|
cannotConfigDefaultVlanForSwuniMltPort(13559),
|
|
cannotConfigDefaultVlanForSwuniPort(13560),
|
|
cannotConfigFaEnabledPortToTuniPort(13561),
|
|
cannotConfigFaEnabledMltToTuniMlt(13562),
|
|
faServerOnly(13563),
|
|
faCannotChangeMgmtIsid(13564),
|
|
mustSetFaMgmtCvidAndMgmtIsidTogether(13565),
|
|
cannotRemoveSwitchedUniPortFromVlan(13566),
|
|
cannotRemoveSwitchedUniMltFromVlan(13567),
|
|
cannotRemoveVlanFromSwitchedUniFaMlt(13568),
|
|
cannotEnableSwuniFaOnSpbmNniPort(13569),
|
|
cannotEnableSwuniFaOnSpbmNniMlt(13570),
|
|
cannotEnableBpduOnSwuniIsidWithPlatformVlan(13571),
|
|
bpduCanOnlyBeEnabledForUntaggedTraffic(13572),
|
|
cannotConfigFaOnMltFaIntfPort(13573),
|
|
faMgmtIsidCvidSetToDefTogether(13574),
|
|
cannotEnableStpOnMefUniOrFaEnabledMltPorts(13575),
|
|
faInterfaceDoesNotExist(13576),
|
|
cvid4095isNotSupported(13577),
|
|
cannotEnableSpbMulticastIsidInDynRange(13578),
|
|
cannotCreateFaIntfOnMltPort(13579),
|
|
cannotDisableFaOnFeOnaPort(13580),
|
|
cannotAssociateSwuniIsidWithBpduEnabledEndptToVlan(13581),
|
|
cannotEnableMefUniFaOnEapolEnabledPort(13582),
|
|
mustSetTypeWhenCreateIsid(13583),
|
|
ipv6BrouterPortsNotAllowedOnSwitchedUniInterface(13584),
|
|
elanIsidCannotAssociateWithVistVlan(13585),
|
|
virtualIstVlanCannotAssociateWithElanIsid(13586),
|
|
faCanOnlyBeConfiguredOnPortAndMltIntf(13587),
|
|
cannotEnableFlexUniFaWhenSpbmIsDisabled(13588),
|
|
deleteIsidBeforeDisableSpbm(13589),
|
|
disableFlexUniFaBeforeDisableSpbm(13590),
|
|
cannotCreateIsidWhenSpbmIsDisabled(13591),
|
|
cannotEnableFlexUniFaWhenVlacpIsEnabledOnPort(13592),
|
|
cannotEnableVlacpWhenFlexUniFaIsEnabledOnPort(13593),
|
|
cannotConfigIgmpStaticOnFlexUniFaEnabledPortMltPort(13594),
|
|
cannotConfigStaticArpOnFlexUniFaEnabledPortMltPort(13595),
|
|
disableLacpBeforeChangingLacpKeyForFlexUniFaEnabledMlt(13596),
|
|
cannotEnableBpduOnDiscMgmtEndpoint(13597),
|
|
cannotAddFeOnaPortToFaMlt(13598),
|
|
cannotConfigFaOnFeOnaPortOrMltWithFeOnaPort(13599),
|
|
portNotMACSecCapable(13601),
|
|
portNotAssociatedToAConnectivityAssociation(13602),
|
|
macSecEnabledOnPort(13603),
|
|
macSecConnectivityAssociationDoesNotExist(13604),
|
|
macSecPortAlreadyAssociatedToConnectivityAssociation(13605),
|
|
macSecEncryptionNotEnabledOnPort(13606),
|
|
macSecCAAssociatedToPort(13607),
|
|
macSecMaximumConnectivityAssociationConfigured(13608),
|
|
macSecConnectivityAssociationAlreadyExists(13609),
|
|
macSecConnectivityAssociationKeyInvalidValue(13610),
|
|
macSecConnectivityAssociationNameInvalidValue(13611),
|
|
premierMACSecSoftwareLicenseViolation(13612),
|
|
cannotDisableAutoNegotiationWhenMacsecAssociated(13613),
|
|
portCannotAssociateToMacsecWhenAutoNegIsDisabled(13614),
|
|
macSecNotSupportedWith100MbFullAutoNegAdvert(13615),
|
|
macSecReplayProtectIsNotSupportedInThisRelease(13616),
|
|
filterDeleteArpOrIp(13701),
|
|
conflictingAceAttrArp(13702),
|
|
ipv6FiltersNotSupported(13703),
|
|
ipv6OutPortTypeAclNotSupported(13704),
|
|
ipv6AclCtrlPktActionNotSupported(13705),
|
|
ipv6QosAceNotSupported(13706),
|
|
isisAcceptIsidAlreadyExist(13801),
|
|
igmpConfigsNotAllowedInSpbmConfigMode(13802),
|
|
virtualIstNotAllowedOnMltInSpbmConfigMode(13803),
|
|
plsbEnableIp4ScBeforeEnableIp6Sc(13804),
|
|
plsbConfigIp6SourceAddrBeforeEnableIp6Sc(13805),
|
|
plsbDisableIp6ShortcutsBeforeDisableIp4Shortcuts(13806),
|
|
spbmMaxNumOfIsisInterfReached128(13807),
|
|
plsbCannotSetIp6SourceAddrToZeroWhenIp6ScEnabled(13808),
|
|
plsbCannotRemoveTunnelSrcIpWhenIsisLogicalIntfEnabled(13809),
|
|
plsbCannotModifyTunnelSrcIpWhenIsisLogicalIntfEnabled(13810),
|
|
plsbCannotDeleteVrfAssociatedWithTunnelSourceIp(13811),
|
|
plsbTunnelSourceIpNotConfigured(13812),
|
|
plsbTunnelSourceIpInvalid(13813),
|
|
plsbTunnelSourceIpDoesNotExistInGrt(13814),
|
|
plsbTunnelSourceIpDoesNotExistInVrf(13815),
|
|
ipInUseAsIsisIpTunnelSourceAddr(13816),
|
|
isisCannotDeletePlsbInstanceWithIpTunnelSourceAddress(13817),
|
|
plsbIsidCannotBeAssignedToTunnelVrf(13818),
|
|
plsbLogicalInterfaceNameAlreadyExists(13819),
|
|
plsbCannotModifyIpTunnelMtuWhenIsisLogicalIntfExists(13820),
|
|
plsbIsisLogicalInterfaceOfTypeL2AndL3CoreCannotExistTogether(13821),
|
|
plsbL2CoreIsisLogicalInterfaceConfiguredPortCantBeAddedToVlan(13822),
|
|
plsbL2CoreIsisLogicalIntfConfiguredMltCantBeAddedToVlan(13823),
|
|
plsbL2CoreIsisLogicalIntfConfiguredPortCantBeAddedToMlt(13824),
|
|
plsbMaxNumOfLogicalIsisIntfConfigured(13825),
|
|
plsbMltIsConfiguredAsIsisLogicalTunnelIntfMlt(13826),
|
|
plsbPortIsConfiguredAsIsisLogicalTunnelIntfPort(13827),
|
|
spbmMaxNumOfIsisInterfReached255(13828),
|
|
plsbIsisLogicalIntfDestIfIndexCannotBeModified(13829),
|
|
plsbCannotConfigureSameIsisLogicalInterfaceVidAndSpbmBvlanId(13830),
|
|
plsbIsisLogicalIntfVidsOutOfRange(13831),
|
|
plsbIsisLogicalIntfExistsWithSameDestIp(13832),
|
|
plscIsisLogcalIntfCannotConfigOnMefUniFaPortMlt(13833),
|
|
cannotEnableMefUniFaOnLogicalIntf(13834),
|
|
cannotConfigPlsbIsisIntfOnMefUniFaEnabledPortMlt(13835),
|
|
isisLogicalInterfaceIdDoesNotExist(13836),
|
|
isisLogicalInterfacePortCannotBeBrouter(13837),
|
|
invalidIsisLogicalInterfaceDestPort(13838),
|
|
cannotConfigFeOnaOnFaPortMltPort(13839),
|
|
spbmConfigsNotAllowedInAdvancedFeatureModeDisabled(13840),
|
|
cannotAddSpbmNniToNonSpbmBvlan(13842),
|
|
noBrouterAndSpbmNniOnSamePort(13843),
|
|
bootConfigFlagNniMstpConflictWithSpbmNni(13844),
|
|
spbmSysidCannotBeSameAsSmltVirtBmac(13845),
|
|
spbmSmltPeerSysidCannotBeSameAsSmltVirtBmac(13846),
|
|
cannotEnableMstpOnSpbmNniPort(13848),
|
|
isisLogicalInterfaceRequireTwoVlansPerPlsbInstance(13850),
|
|
vrfPim6LimitExceeded(14001),
|
|
pim6FeatureNotSupported(14002),
|
|
vrfPim6DoesNotExist(14003),
|
|
pim6GlobNotSuppActChkInterval(14004),
|
|
pim6ConfigsNotAllowedInSpbmConfigModeEnabled(14005),
|
|
pim6InvalidMode(14006),
|
|
pim6GlobInvalidUniRouteChangeTimeOut(14007),
|
|
pim6GlobInvalidDiscDataTimeOut(14008),
|
|
pim6GlobInvalidCRPADVTimeOut(14009),
|
|
pim6GlobInvalidBootstrapPeriod(14010),
|
|
pim6ActChkIntervalNotAllowed(14011),
|
|
pim6GlobInvalidActChkInterval(14012),
|
|
pim6InvalidHelloInterval(14013),
|
|
pim6InvalidJPInterval(14014),
|
|
pim6GlobInvalidRegSupprTimeOut(14015),
|
|
pim6NotEnabled(14016),
|
|
pim6StaticRpNotEnabled(14017),
|
|
pim6GlobInvalidFwdCacheTimeOut(14018),
|
|
pim6InvalidModeChg(14019),
|
|
pim6GlobInvalidFastJP(14020),
|
|
pim6InvalidEnable(14021),
|
|
pim6OrMldAlreadyEnabled(14022),
|
|
pim6StaticRPEnabled(14023),
|
|
pim6GroupAddressInvalid(14024),
|
|
pim6StaticRPEntryExists(14025),
|
|
fhsMaxIpv6AclReached(14101),
|
|
fhsMaxEntriesPerAclReached(14102),
|
|
fhsAclInUse(14103),
|
|
fhsAclNotExist(14104),
|
|
fhsIpv6AclMaskMismatch(14105),
|
|
fhsMaxMacAclReached(14106),
|
|
fhsMaxRagPoliciesReached(14107),
|
|
fhsRagHopLimitMismatch(14108),
|
|
fhsRagPolicyInUse(14109),
|
|
fhsRagPolicyNotExist(14110),
|
|
fhsDhcpgPoliciesReached(14111),
|
|
fhsDhcpgPolicyInUse(14112),
|
|
fhsDhcpgPolicyNotExist(14113),
|
|
fhsDhcpgPreferenceLimitMismatch(14114),
|
|
fhsInvalidDeviceRole(14115),
|
|
fhsCantAttachRagPolicyWhenDeviceRoleIsNotRouter(14116),
|
|
fhsCantAttachDhcpgPolicyWhenDeviceRoleIsNotServer(14117),
|
|
fhsCantConfigDeviceRoleToNonRouterWhenPolicyAttached(14118),
|
|
fhsCantConfigDeviceRoleToNonServerWhenPolicyAttached(14119),
|
|
fhsIpv6AclMaskMinValue(14120),
|
|
fhsMaxStaticBindingEntriesReached(14121),
|
|
fhsCantCreateBindingEntryWithMulticastMacAddr(14122),
|
|
fhsCantCreateBindingEntryWithMulticastIpAddr(14123),
|
|
fhsCantCreateBindingEntryWithLinkLocalAddr(14124),
|
|
fhsCantDeleteDynamicBindingEntry(14125),
|
|
fhsStaticBindingEntryNotExist(14126),
|
|
fhsCantCreateBindingEntryWithUnspecIpAddr(14127),
|
|
fhsCantCreateBindingEntryWithInternalLoopbackIpAddr(14128),
|
|
fhsCantCreateBindingEntryWithAllZeroMacAddr(14129),
|
|
fhsCantCreateBindingEntryWithBroadcastMacAddr(14130),
|
|
fhsIpv6SgPortEnabled(14131),
|
|
fhsIpv6SgFhsNotEnabled(14132),
|
|
fhsIpv6SgNdiNotEnabled(14133),
|
|
fhsIpv6SgNdiVlanNotEnabled(14134),
|
|
fhsIpv6SgNdiPortNotEnabled(14135),
|
|
fhsIpv6SgNoResourcesAvailable(14136),
|
|
fhsIpv6SgNotAvailableOnMlt(14137),
|
|
fhsNotAllowedOnSpbmBvlan(14138),
|
|
unprintableCharacterIsNotAllowedInEmailAddress(14201),
|
|
emailAddressLengthExceedsMaxLimitOf254Chars(14202),
|
|
numOfEmailAddressExceedsMaxSupportedLimit(14203),
|
|
lengthOFEmailAddressListTooLong(14204),
|
|
smtpServerAddrOnlySupportsIpv4AndHostname(14205),
|
|
portCannotBeModifiedWhileSmtpIsEnabled(14206),
|
|
invalidSmtpServerPortNumber(14207),
|
|
invalidStatusSendTimer(14208),
|
|
smtpReceiverEmailCannotBeEmptyWhileSmtpIsEnabled(14209),
|
|
smtpServerAddrCannotBeModifiedWhileSmtpIsEnabled(14210),
|
|
smtpCannotBeEnabledWithoutServerAddr(14211),
|
|
smtpCannotBeEnabledWhileReceiverEmailAddrIsEmpty(14212),
|
|
doubleQuotationMarkIsNotAllowedInEmailAddress(14213),
|
|
commaIsNotAllowedInEmailAddress(14214),
|
|
invalidEventIdsListInputFormat(14215),
|
|
nonExistIpv6McastAddress(14301),
|
|
invalidIpv6MulticastAddress(14302),
|
|
invalidQueryIntervalMldIntfTbl(14303),
|
|
invalidMldIntfTblVersion(14304),
|
|
invalidQueryMaxResponseTime(14305),
|
|
invalidRobustnessValue(14306),
|
|
invalidLastMembQueryInterval(14307),
|
|
mldAdminVerConfiguredLessThanOperatingVer(14308),
|
|
mldPimOrMldAlreadyEnabled(14309),
|
|
mldPimModeMldVersionIncompatible(14310),
|
|
mldQueryIntervalGreaterThanMaxResTime(14311),
|
|
mldAlreadyEnabled(14312),
|
|
mldPimEnabledInSSMMode(14313),
|
|
mldDisableV2First(14314),
|
|
mldNotVersion2(14315),
|
|
mldDisableSsmSnooping(14316),
|
|
mldFlushActionNotAllowedWhenMldSnoopingIsDisabled(14317),
|
|
ikeCACertificateNotInstalled(14801),
|
|
ikeIdentityCertificateNotInstalled(14802),
|
|
ikeCannotChangeRevocationCheckMethodForEnabledPolicy(14804),
|
|
ikeCrlFileNotPresent(14805),
|
|
ipv6CannotDeleteInterfaceOnMgmtPortWithIpsecEnabled(14806),
|
|
cannotLinkIpsecPolicyForOspfv3ToSaWithKeymodeAuto(14807),
|
|
ikeEncKeylenSetOnlyForAesCbc(14808),
|
|
ipsecEncKeylenMustBeLessOrEqualToIkeEncKeylen(14809),
|
|
ikeCannotChangeParametersProfileInUse(14810),
|
|
ikeDhHashEncryptIntegrityAlgoNullCannotBeAttached(14811),
|
|
vxlanCannotDeleteVtepSrcIpWhenRemoteVtepIsConfigured(14401),
|
|
maxNumOfVtepsAreConfigured(14402),
|
|
vxlanVtepSourceIpNotConfigured(14403),
|
|
vxlanVtepRemoteIpCannotBeLocalIp(14404),
|
|
vxlanVtepExistsWithSameRemoteIp(14405),
|
|
vxlanVtepRemoteIpCannotBeModified(14406),
|
|
vxlanVtepNameAlreadyExists(14407),
|
|
vxlanVtepDoesNotExist(14408),
|
|
vxlanVnidCannotBeSameAsIsid(14409),
|
|
vxlanInvalidVtepId(14410),
|
|
vxlanCannotModifyIsidAssociationdWithVnid(14411),
|
|
vxlanVnidDoesNotExist(14412),
|
|
vxlanVtepIsNotAssociatedWithVnid(14413),
|
|
vxlanMaxVtepsAssociatedWithVnid(14414),
|
|
vxlanSameEndPointCannotBePresentInBothVnidAndIsid(14415),
|
|
vxlanBaseModeIsidValueCannotBeSameAsVnid(14416),
|
|
vxlanCannotDeleteIsidAssociatedWithVnid(14417),
|
|
vxlanCannotConfigureSwuniEndpointsUnderVnidInInterworkingMode(14418),
|
|
vxlanIsidAssociatedWithVnid(14419),
|
|
vxlanCannotDeleteVlanConfiguredWithIsidAssociatedWithVnid(14420),
|
|
vxlanCannotAssociateTransparentUniIsidToVnid(14421),
|
|
vxlanIsidCannotBeAssociatedWithMoreThanOneVnid(14422),
|
|
vxlanIsidCannotBeAssignedToVtepSrcIpVrf(14423),
|
|
vxlanCannotDeleteVrfAssociatedWithVtepSourceIp(14424),
|
|
vxlanConfigHasVnidSameAsIsid(14425),
|
|
vxlanVirtualIstConfigured(14426),
|
|
vxlanSmltExist(14427),
|
|
vxlanIpInUseAsVtepSrcIpAddr(14428),
|
|
vxlanBaseSmltMltCannotBeVnidEndPoint(14429),
|
|
vxlanBaseModeSmltVistConfigNotAllowed(14430),
|
|
vxlanIpInUseAsIpSrcAddr(14431),
|
|
vxlanIpInUseAsIpTunnelSrcAddr(14432),
|
|
vxlanCannotDeleteVtepSrcIpWhenVnidConfigured(14433),
|
|
vxlan16777215IsWellKnownVnid(14434),
|
|
vxlanConfigsNotAllowedWhenAdvancedFeatureModeDisabled(14436),
|
|
vxlanBaseModeVnidValueCannotBeSameAsIsid(14437),
|
|
vxlanGwFullInterworkingModeEnabled(14438),
|
|
vxlanConfigsNotAllowedInSpbmConfigModeDisabled(14439),
|
|
vxlanVtepIsAlreadyAssociatedWithVnid(14440),
|
|
vxlanFaIsidShouldBeConfigured(14441),
|
|
vxlanInvalidIsid(14442),
|
|
vxlanVtepSrcIpCannotBeSameAsVtepRemoteIp(14443),
|
|
vxlanInvalidVtepName(14444),
|
|
vxlanVnidCannotBeSameAsPlsbBvlanViceVersa(14445),
|
|
vxlanGwInterworkingCannotBeEnabledInNonAdvFeatureMode(14446),
|
|
chefClientCertFileNotSpecified(14901),
|
|
chefClientCannotOpenCertFile(14902),
|
|
chefClientAddressRequired(14903),
|
|
chefClientInvalidCertFile(14904),
|
|
chefClientAddressNotChangeable(14905),
|
|
chefClientCannotChangeConfigurationWhenEnabled(14906),
|
|
chefClientServerAddressRequired(14907),
|
|
chefClientActivateSoftwareToEnable(14908),
|
|
invalidUserPasswordRule(1233),
|
|
invalidUserPasswordRulePostNotification(1234),
|
|
invalidUserPasswordRulePreNotification(1235),
|
|
invalidUserPasswordRuleAgeOut(1236),
|
|
invalidUserLogonAttenmpts(1237),
|
|
invalidUserPasswordRuleChangeInterval(1238),
|
|
pimgwConfigsNotAllowedInSpbmConfigModeDisabled(13901),
|
|
pimgwNotSupportedOnPlatform(13902),
|
|
spbMcastCannotBeEnabledWithPimgw(13903),
|
|
pimgwCannotBeEnabledWithSpbMcast(13904),
|
|
spbMcastCannotBeDisabledWithPimgwEnabled(13905),
|
|
spbMcastCannotBeEnabledWithPimgwEnabled(13906),
|
|
pimgwCannotBeDisabledWithSpbMcastEnabled(13907),
|
|
pimgwCannotBeEnabledWithSpbMcastEnabled(13908),
|
|
pimgwCannotBeEnabledWithoutIpAddr(13909),
|
|
pimgwCannotBeEnabledWithSnoop(13910),
|
|
pimgwCannotBeEnabledWithSnoopSpb(13911),
|
|
pimgwCannotBeEnabledWithPim(13912),
|
|
pimgwCannotBeEnabledWithDvmrp(13913),
|
|
vlanPimCannotBeEnabledWithPimGateway(13914),
|
|
pimgwAgentNotEnabled(13915),
|
|
pimgwControllerNotEnabled(13916),
|
|
pimgwInterfaceInvalidHelloInterval(13917),
|
|
pimgwInterfaceInvalidJoinPruneInterval(13918),
|
|
pimgwCannotSetHelloJoinPruneIntervalWithoutIpAddress(13919),
|
|
vlanPimCannotBeConfiguredWithPimGateway(13920),
|
|
vlanIgmpCannotBeConfiguredWithPimGateway(13921),
|
|
pimgwCannotBeEnabledWithClipIf(13922),
|
|
pimgwCannotBeEnabledWithMgmtIf(13923),
|
|
pimgwAgentIsAlreadyEnabled(13924),
|
|
pimgwControllerIsAlreadyEnabled(13925),
|
|
smltOrIstCannotBeAddedToPimGatewayVlan(13926),
|
|
pimgwCannotBeEnabledOnSmltOrIstPort(13927),
|
|
pimgwCannotBeEnabledOnSmltVlan(13928),
|
|
pimgwVlanPortCannotBeAddedToSmlt(13929),
|
|
smltCannotBeEnabledOnPimGatewayVlanPort(13930),
|
|
pimgwCannotBeEnabledWithoutIpCirc(13931),
|
|
pimgwCannotBeEnabledOnIsidConfiguredVlan(13932),
|
|
isidCannotBeSetOnPimGatewayVlan(13933),
|
|
pimgwCannotBeEnabledOnVistVlan(13934),
|
|
pimgwCannotBeEnabledIfDvrEnabled(13935),
|
|
pimgwCannotAddForeignSrcWhenControllerIsDisabled(13936),
|
|
pimgwCannotDeleteForeignSrcWhenControllerIsDisabled(13937),
|
|
pimgwCannotConfigHelloIntervalWithoutPimgwInterface(13938),
|
|
pimgwCannotConfigJoinPruneIntervalWithoutPimgwInterface(13939),
|
|
pimgwCannotDeleteForeignSrcWhenForeignSourceEntryDoesNotExist(13940),
|
|
pimgwCannotAddForeignSrcWhenForeignSourceEntryAlreadyExist(13941),
|
|
pimgwCannotEnableSpbPimGwOnBvlan(13943),
|
|
dvrNotSupported(14501),
|
|
disableDvrBeforeChangingDomainId(14502),
|
|
dvrIsNotEnabledForDomainId(14503),
|
|
disableDvrBeforeChangingRole(14504),
|
|
ipCommandsNotSupportedOnDvrLeaf(14505),
|
|
cannotEnableDvrLeafIpConfigured(14506),
|
|
vistAlreadyExistRemoveFirst(14507),
|
|
vistAlreadyExist(14508),
|
|
cannotConfigDvrVistIfGlobalVistConfigured(14509),
|
|
vistDoesNotExist(14510),
|
|
configGwIpAddrBeforeEnablingDvr(14511),
|
|
dvrCantBeEnabledIfPimgwEnabled(14512),
|
|
dvrCantBeEnabledIfSnoopEnabled(14513),
|
|
vlanSnoopCantBeEnabledInDvrNode(14514),
|
|
configIpInterfaceBeforeEnablingDvr(14515),
|
|
disableDvrBeforeChangingGwIpAddr(14516),
|
|
enableControllerBeforeEnablingDvrOnVlan(14517),
|
|
enableControllerBeforeConfiguringGwIpv4(14518),
|
|
platformVlanNotAllowedOnLeaf(14519),
|
|
removePlatformVlanBeforeEnableLeaf(14520),
|
|
notAllowPortsInDefaultVlanOnDvrLeaf(14521),
|
|
cannotEnableDvrLeafIfPortsInDefaultVlan(14522),
|
|
cannotConfigPlatformVlanOnDvrLeaf(14523),
|
|
notAllowToConfigVlanBasedAclRules(14524),
|
|
cannotEnableDvrLeafVlanBasedAclExists(14525),
|
|
notAllowToConfigPortBasedAclRules(14526),
|
|
cannotEnableDvrLeafPortBasedAclExists(14527),
|
|
notAllowToConfigTuniOnDvrLeaf(14528),
|
|
cannotEnableDvrLeafWhenTuniExists(14529),
|
|
cannotEnableDvrLeafWhenLogicalIntfExist(14530),
|
|
notAllowToConfigLogicalIntfOnDvrLeaf(14531),
|
|
cannotConfigGlobalVistIfDvrVistConfigured(14532),
|
|
cannotConfigPimgwOnDvrLeaf(14533),
|
|
cannotEnableDvrLeafWhenPimgwEnabled(14534),
|
|
cannotConfitVrfOnDvrLeaf(14535),
|
|
cannotEnableDvrLeafWhenVrfExists(14536),
|
|
disableDvrBeforeRemovingGwIpAddr(14537),
|
|
dvrConfigsNotAllowedInSpbmConfigModeDisabled(14538),
|
|
cannotEnableDvrWhenSpbmIsDisabled(14539),
|
|
removeIpInterfaceBeforeEnablingDvr(14540),
|
|
enableBootConfigFlagDvrLeafMode(14541),
|
|
dvrIsNotEnabled(14542),
|
|
disableBootConfigFlagDvrLeafMode(14543),
|
|
configIsidForVlanFirst(14544),
|
|
vistNotAllowedOnDvrLeaf(14545),
|
|
cannotEnableMoreSpecificNonLocalWhenDvrEnabled(14546),
|
|
cannotEnableDvrWhenMoreSpecificNonLocalEnabled(14547),
|
|
vlanIpAddAndDvrGwipAreNotInSameSubnet(14548),
|
|
cannotConfigPimgwOnDvrVlan(14549),
|
|
cannotEnableDvrVlanWhenPimgwIsConfigured(14550),
|
|
cannotEnableDvrVlanWhenRsmltIsEnabled(14551),
|
|
cannotEnableRsmltOnDvrVlan(14552),
|
|
cannotConfigVrrpOnDvrVlan(14553),
|
|
cannotEnableDvrVlanWhenVrrpIsConfigured(14554),
|
|
cannotEnableDvrWhenBackboneIsEnabled(14555),
|
|
cannotEnableBackboneWhenDvrIsEnabled(14556),
|
|
disableDvrBeforeChangingOrDeletingIsid(14557),
|
|
cannotConfigureInbandMgmtIpForDvrController(14558),
|
|
cannotEnableControllerwhenInbandMgmtIpConfigured(14559),
|
|
dvrSpbmMcastCommandsNotSupportedOnDvrLeaf(14560),
|
|
dvrControllerDoesNotExist(14561),
|
|
dvrLeafDoesNotExist(14562),
|
|
cannotConfigLoopbackIpOnDvrLeaf(14563),
|
|
sameGwIpv4AndVlanIpIsNotAllowed(14564),
|
|
isidReservedForDvrUse(14565),
|
|
dvrVistNotAllowedOnDvrController(14566),
|
|
injectDefaultRouteNotAllowedOnDvrLeaf(14567),
|
|
cannotConfigBrouterIpOnDvrLeaf(14568),
|
|
macOffSetNotAllowedOnDvrEnabledVlan(14571),
|
|
disableDvrForVlanBeforeDeletingIpAddress(14572),
|
|
cannotEnableBackboneWhenDvrLeafModeIsTrue(14574),
|
|
cannotConfigDvrGwIpOnSpbmBvlan(14575),
|
|
createDvrGloballyBeforeConfiguringIpOnDvrVlan(14576),
|
|
dvrConfigNotAllowedOnLeaf(14569),
|
|
dvrIpvpnOrIsidNotConfiguredInVrf(14570),
|
|
dvrRedistributionConfigAllowedOnlyOnController(14573),
|
|
cannotEnableDvrVlanWhenIpv6IsConfigured(14577),
|
|
cannotEnableBackboneWhenDvrCtrlConfigPresent(14578),
|
|
configurationNotAllowedWhenBackboneIsEnabled(14580),
|
|
slppCommandsAreNotSupportedOnDvrLeaf(14581),
|
|
dvrGwMacCreateInsufficientResources(14583),
|
|
clearDvrHostEntryCanBeExecutedOnlyOnController(14584),
|
|
dvrInstanceDoesNotExist(14585),
|
|
removeSmltConfigBeforeDisablingDvrLeaf(14586),
|
|
dvrEnableNotAllowedOnOspfEnabledVlan(14589),
|
|
dvrEnableNotAllowedOnRipEnabledVlan(14590),
|
|
dvrVistInvalidClusterId(14591),
|
|
invalidDvrVistConfiguration(14592),
|
|
dvrLeafBrouterAlreadyConfigured(14593),
|
|
dvrLeafDeleteInternalVlanNotAllowed(14594),
|
|
isidRangeReservedForInternalUse(14595),
|
|
dvrNotEnoughDataToModifyInstance(14596),
|
|
maxVrfReachedWithoutScaling(14601),
|
|
vrfScalingCannotBeEnabledWhenVlanInExistInRange(14602),
|
|
vrfScalingCannotBeDisabledWhenVrfCountMoreThanDefaultValue(14603),
|
|
vlanInternallyUsedForVrfScaling(14604),
|
|
configHasPlatformVlanConfiguredInReservedRange(14605),
|
|
dhcpsnNotAllowedOnPvlan(11126),
|
|
dhcpsnNotAllowedOnSpbmBvlan(11127),
|
|
dhcpsnMaxNumberOfEntriesAlreadyReached(11128),
|
|
dhcpsnGloballyDisabled(11129),
|
|
dhcpsnDisabledOnVlan(11130),
|
|
dhcpsnBindingDoesNotContainMacAddr(11131),
|
|
dhcpsnBindingInvalidMacVlanidPair(11132),
|
|
daiNotAllowedOnPvlan(11133),
|
|
daiDisabledOnVlan(11134),
|
|
daiNotAllowedOnSpbmBvlan(11135),
|
|
dhcpIpsgEnabledOnPort(11136),
|
|
dhcpIpsgPortNotInDhcpsnVlan(11137),
|
|
dhcpIpsgPortNotDhcpsnUntrusted(11138),
|
|
dhcpIpsgPortNotInDaiVlan(11139),
|
|
dhcpIpsgPortNotDaiUntrusted(11140),
|
|
dhcpIpsgNoResourcesAvailable(11141),
|
|
dhcpIpsgNotAvailableOnMlt(11142),
|
|
dhcpsnPortIsPartOfMlt(11143),
|
|
daiPortIsPartOfMlt(11144),
|
|
dhcpsnBindingLearnedEntriesCannotBeModified(11145),
|
|
daiSmltPortsMustBeTrusted(11146),
|
|
dhcpsnSmltPortsMustBeTrusted(11147),
|
|
daiDifferentPortConfigurationsForMlt(11148),
|
|
dhcpsnDifferentPortConfigurationsForMlt(11149),
|
|
dhcpIpsgNotAvailableOnBrouter(11150),
|
|
dhcpsnAndRelayNotAllowedOnSameVlan(11151),
|
|
dhcpsnNotAllowedOnGuestVlan(11152),
|
|
dhcpsnNotAllowedOnFailOpenVlan(11153),
|
|
dhcpsnNotAllowedOnEnabledEapolPorts(11154),
|
|
daiCannotAddIpsgPortsOnDaiDisabledVlan(11155),
|
|
dhcpsnCannotAddIpsgPortsOnDhcpsnDisabledVlan(11156),
|
|
ipsgPortsCannotBeRemovedFromVlan(11157),
|
|
noKeyFound(14701),
|
|
allCommandsParamtersNotFound(14702),
|
|
invalidAction(14703),
|
|
cannotModifyCaEntryForValidCa(14704),
|
|
lastActionAlreadyInProgress(14705),
|
|
revokeReasonOnlyRevokeAction(14706),
|
|
caAlreadyAuthenticated(14707),
|
|
noActiveCertificateFound(14708),
|
|
revocationReasonNotFound(14709),
|
|
certificateAlreadyInstalled(14710),
|
|
keyAssociatedWithActiveCert(14711),
|
|
subjectScalarAssociatedWithCert(14712),
|
|
recordNotFound(14713),
|
|
strToDateConversionFailed(14714),
|
|
couldNotOpenDirectory(14715),
|
|
fileNameNotFound(14716),
|
|
caNotAuthenticated(14717),
|
|
validCertificateAlreadyPresent(14718),
|
|
cannotDeleteTrustPoints(14719),
|
|
caEntryAlreadyExits(14720),
|
|
maxTrustpointsReached(14721),
|
|
invalidRowStatus(14722),
|
|
allSubjectScalarsNotFound(14723),
|
|
caOfflineCertNotInstalled(14724),
|
|
noKeyPairConfigured(14725),
|
|
certificateNotEnrolled(14726),
|
|
noOfflineSubjectCertificateInstalled(14727),
|
|
offlineCertificateInstalled(14728),
|
|
validityDaysValidOnlyForRenewAndEnroll(14729),
|
|
invalidSubjectOrKey(14730),
|
|
caEntryPresent(14731),
|
|
subjectAndInstallFileCannotBeConfiguredTogether(14732),
|
|
invalidKeySize(14733),
|
|
noCaFound(14734),
|
|
digiCertChallengePasswordValidOnlyWithRenewAndEnroll(14735),
|
|
digiCertCertificateExpired(14736),
|
|
digiCertReadCertificateFileFailed(14737),
|
|
digiCertReadCertificateFileValidityFailed(14738),
|
|
digiCertSubjectCertificateAlreadyInstalled(14739),
|
|
digiCertNotRootCaCertificate(14740),
|
|
digiCertKeyAlreadyPresent(14741),
|
|
digiCertKeyAssociatedWithCaEntry(14742),
|
|
digiCertSubjectCertificateInstalled(14743),
|
|
digiCertInvalidFileFormat(14744),
|
|
digiCertCdpUrlNotConfigured(14745),
|
|
digiCertSubjectCertificateNotInstalled(14746),
|
|
digiCertFileNameNotFoundInOfflineCertDir(14747),
|
|
digiCertFileNameNotFoundInOfflineCaCertDir(14748),
|
|
digiCertFileNameNotFoundInOfflineRootCaCertDir(14749),
|
|
digiCertNoKeyFound(14750),
|
|
digiCertNoOfflineCACertificateInstalled(14751),
|
|
digiCertNoOfflineRootCACertificateInstalled(14752),
|
|
digiCertNoOfflineCRLFileInstalled(14753),
|
|
digiCertFileNameNotFoundInOfflineCrlDir(14754),
|
|
digiCertInvalidValueToGenerateCsr(14755),
|
|
digiCertNotCACertificate(14756),
|
|
digiCertNotRootCertificate(14757),
|
|
digiCertRootCaOfflineCertNotInstalled(14758),
|
|
digiCertRootCertFileAlreadyInstalled(14759),
|
|
digiCertCaCertFileAlreadyInstalled(14760),
|
|
digiCertOnlineCAEntryExists(14761),
|
|
digiCertKeyPairGenInProgress(14762),
|
|
digiCertNotInterCaCertificate(14763),
|
|
digiCertOfflineCannotUseRootCertAssociatedWithOnlineCa(14764),
|
|
digiCertOnlineCaCannotUseRootCertAssociatedWithOffline(14765),
|
|
readWriteAccessReadOnly(900),
|
|
readWriteAccessLevelOne(901),
|
|
readWriteAccessLevelTwo(902),
|
|
readWriteAccessLevelThree(903),
|
|
readWriteAccessReadWrite(904),
|
|
readWriteAccessReadWriteAll(905),
|
|
readWriteAccessUnknownLevel(906)
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable is used primarily as an enumeration
|
|
to list the proprietary return codes that this
|
|
device can send to a management station in
|
|
response to a failed SNMP operation."
|
|
DEFVAL { none }
|
|
::= { rcError 4 }
|
|
|
|
-- *** ABOVE SECTION IS GENERATED FROM ../mib_tools/error.mib ***
|
|
|
|
rcErrorSendTrap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether to send trap upon receiving an
|
|
error in the system."
|
|
DEFVAL { true }
|
|
::= { rcError 5 }
|
|
|
|
-- TRAPS
|
|
|
|
rcTrapsMib OBJECT IDENTIFIER ::= { rcTraps 0 }
|
|
|
|
rcnCardDown NOTIFICATION-TYPE
|
|
OBJECTS { rcCardIndex, rcCardAdminStatus, rcCardOperStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardDown trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the down state."
|
|
::= { rcTrapsMib 1 }
|
|
|
|
rcnCardUp NOTIFICATION-TYPE
|
|
OBJECTS { rcCardIndex, rcCardAdminStatus, rcCardOperStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardUp trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the up state."
|
|
::= { rcTrapsMib 2 }
|
|
|
|
rcnErrorNotification NOTIFICATION-TYPE
|
|
OBJECTS { rcErrorLevel, rcErrorCode, rcErrorText }
|
|
STATUS current
|
|
DESCRIPTION "A rcErrorNotification trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that an error condition has occured."
|
|
::= { rcTrapsMib 3 }
|
|
|
|
rcnStpNewRoot NOTIFICATION-TYPE
|
|
OBJECTS { rcStgId }
|
|
STATUS current
|
|
DESCRIPTION "A rcStpNewRoot trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Spanning Tree Protocol has declared
|
|
the device to be the new root of the spanning
|
|
tree."
|
|
::= { rcTrapsMib 4 }
|
|
|
|
rcnStpTopologyChange NOTIFICATION-TYPE
|
|
OBJECTS { rcStgId, rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcStpTopologyChange trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Spanning Tree Protocol has gone due
|
|
a topology change event."
|
|
::= { rcTrapsMib 5 }
|
|
|
|
rcnChasPowerSupplyDown NOTIFICATION-TYPE
|
|
OBJECTS { rcChasPowerSupplyId, rcChasPowerSupplyOperStatus}
|
|
STATUS current
|
|
DESCRIPTION "A rcChasPowerSupplyDown trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the rcChasPowerSupplyOperStatus
|
|
object for one of its power supply unit is
|
|
about to transition into the down state."
|
|
::= { rcTrapsMib 6 }
|
|
|
|
rcnChasFanDown NOTIFICATION-TYPE
|
|
OBJECTS { rcChasFanId, rcChasFanOperStatus}
|
|
STATUS current
|
|
DESCRIPTION "A rcChasFanDown trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the rcChasFanOperStatus object
|
|
for one of its power supply unit is about to
|
|
transition into the down state."
|
|
::= { rcTrapsMib 7 }
|
|
|
|
rcnLinkOscillation NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcLinkOscillation trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected an excessive number of link state
|
|
transitions on the specified port."
|
|
::= { rcTrapsMib 8 }
|
|
|
|
rcnMacViolation NOTIFICATION-TYPE
|
|
OBJECTS { rcErrorText, rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcMacViolation trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
received a PDU with an invalid source MAC
|
|
address."
|
|
::= { rcTrapsMib 9 }
|
|
|
|
rcnSonetTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcPosSonetTrapType, rcPosSonetTrapIndication }
|
|
STATUS current
|
|
DESCRIPTION "A rcSonetTrap trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected a change of status on a Sonet port."
|
|
::= { rcTrapsMib 10 }
|
|
|
|
rcn2kCardDown NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex,
|
|
rc2kCardFrontAdminStatus,
|
|
rc2kCardFrontOperStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardDown trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the down state."
|
|
::= { rcTrapsMib 11 }
|
|
|
|
rcn2kCardUp NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex,
|
|
rc2kCardFrontAdminStatus,
|
|
rc2kCardFrontOperStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardUp trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the up state."
|
|
::= { rcTrapsMib 12 }
|
|
|
|
rcn2kTemperature NOTIFICATION-TYPE
|
|
OBJECTS { rc2kChassisTemperature }
|
|
STATUS current
|
|
DESCRIPTION "A rc2kTemperature trap signifies that the SNMPv2
|
|
entity, acting in an agent role, has detected the
|
|
chassis is over-heating."
|
|
::= { rcTrapsMib 13 }
|
|
|
|
rcnChasPowerSupplyUp NOTIFICATION-TYPE
|
|
OBJECTS { rcChasPowerSupplyId, rcChasPowerSupplyOperStatus}
|
|
STATUS current
|
|
DESCRIPTION "A rcChasPowerSupplyUp trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the rcChasPowerSupplyOperStatus
|
|
object for one of its power supply unit is
|
|
about to transition into the up state."
|
|
::= { rcTrapsMib 14 }
|
|
|
|
rcn2kAtmPvcLinkStateChange NOTIFICATION-TYPE
|
|
OBJECTS { rc2kAtmPvcIfIndex,
|
|
rc2kAtmPvcVpi,
|
|
rc2kAtmPvcVci,
|
|
rc2kAtmPvcOamVcStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rc2kAtmPvcLinkStateChange trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has detected
|
|
that the rc2kAtmPvcOamVcStatus object for one of PVC is
|
|
about to transition into different state, either from
|
|
up to down or from down to up."
|
|
::= { rcTrapsMib 15 }
|
|
|
|
rcnStpTCN NOTIFICATION-TYPE
|
|
OBJECTS { rcStgId, rcPortIndex, rcStgBridgeAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcStpTopologyChange trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Spanning Tree Protocol has gone due
|
|
a topology change event."
|
|
::= { rcTrapsMib 16 }
|
|
|
|
rcnSmltIstLinkUp NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcSmltIstLinkUp trap signifies that the split
|
|
MLT link is from down to up."
|
|
::= { rcTrapsMib 17 }
|
|
|
|
rcnSmltIstLinkDown NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcSmltIstLinkDown trap signifies that the
|
|
split MLT link is from up to down."
|
|
::= { rcTrapsMib 18 }
|
|
|
|
rcnSmltLinkUp NOTIFICATION-TYPE
|
|
OBJECTS { rcMltSmltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcMltSmltId trap signifies that the split
|
|
SMLT link is up."
|
|
::= { rcTrapsMib 19 }
|
|
|
|
rcnSmltLinkDown NOTIFICATION-TYPE
|
|
OBJECTS { rcMltSmltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcMltSmltId trap signifies that the split
|
|
SMLT link is down."
|
|
::= { rcTrapsMib 20 }
|
|
|
|
rcnChasFanUp NOTIFICATION-TYPE
|
|
OBJECTS { rcChasFanId, rcChasFanOperStatus}
|
|
STATUS current
|
|
DESCRIPTION "A rcChasFanUp trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the rcChasFanOperStatus object
|
|
for one of its power supply unit is about to
|
|
transition into the up state."
|
|
::= { rcTrapsMib 21 }
|
|
|
|
rcnPasswordChange NOTIFICATION-TYPE
|
|
OBJECTS { rcCliPasswordChange, rcCliPassChangeResult}
|
|
STATUS current
|
|
DESCRIPTION "A rcPasswordChange trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the one of the cli password is
|
|
changed."
|
|
::= { rcTrapsMib 22 }
|
|
|
|
rcnEmError NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcChasEmModeError}
|
|
STATUS current
|
|
DESCRIPTION "A rcEmError trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected Em error."
|
|
::= { rcTrapsMib 23 }
|
|
|
|
rcnPcmciaCardRemoved NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcPcmciaRemoved trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the PCMCIA card is being removed."
|
|
::= { rcTrapsMib 25 }
|
|
|
|
rcnSmartCpldTimerFired NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcSmartCpldTimerFired trap signifies that the
|
|
cpld timer fired."
|
|
::= { rcTrapsMib 26 }
|
|
|
|
rcnCardCpldNotUpDate NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardCpldNotUpDate trap signifies that the
|
|
cpld is not up to date."
|
|
::= { rcTrapsMib 27 }
|
|
|
|
rcnIgapLogFileFull NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcIgapLogFileFull trap signifies that the
|
|
Igap accounting time-out Log File reach the
|
|
maximum."
|
|
::= { rcTrapsMib 28 }
|
|
|
|
rcnCpLimitShutDown NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
ifAdminStatus,
|
|
ifOperStatus,
|
|
rcPortCpLimitShutDown }
|
|
STATUS current
|
|
DESCRIPTION "A rcCpLimitShutDown trap signifies that the
|
|
cp limit for the port is shutting down."
|
|
::= { rcTrapsMib 29 }
|
|
|
|
rcnSshServerEnabled NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalPort }
|
|
STATUS current
|
|
DESCRIPTION "A rcSshServerEnabled trap signifies that the
|
|
SSH server is enabled."
|
|
::= { rcTrapsMib 30 }
|
|
|
|
rcnSshServerDisabled NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalPort }
|
|
STATUS current
|
|
DESCRIPTION "A rcSshServerDisabled trap signifies that the
|
|
SSH server is disabled."
|
|
::= { rcTrapsMib 31 }
|
|
|
|
rcnSshSessionLogin NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalHostIpAddr }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcSshSessionLogin trap signifies that there
|
|
is a SSH session login.
|
|
It's deprecated by rcnaSshSessionLogin."
|
|
::= { rcTrapsMib 32 }
|
|
|
|
rcnSshSessionLogout NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalHostIpAddr }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcSshSessionLogout trap signifies that there
|
|
is a SSH session logout.
|
|
It's deprecated by rcnaSshSessionLogout."
|
|
::= { rcTrapsMib 33 }
|
|
|
|
rcnSshUnauthorizedAccess NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalHostIpAddr }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcSshUnauthorizedAccess trap signifies that
|
|
an unauthorized access has occured.
|
|
It's deprecated by rcnaSshUnauthorizedAccess"
|
|
::= { rcTrapsMib 34 }
|
|
|
|
rcnHaCpuState NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcL2RedundancyHaCpuState }
|
|
STATUS current
|
|
DESCRIPTION "A rcHaCpuState trap signifies that the
|
|
state of the HA-CPU."
|
|
::= { rcTrapsMib 35 }
|
|
|
|
rcnInsufficientMemory NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcInsufficientMemory trap indicates insufficient memory on
|
|
CPU blade for proper operation. Recommended memory = 256 MB
|
|
available through Nortel Networks upgrade kit"
|
|
::= { rcTrapsMib 36 }
|
|
|
|
-- This is obsolete. Use rcnSaveConfigFile (rcTrapsMib 61)
|
|
rcnSaveConfigAction NOTIFICATION-TYPE
|
|
OBJECTS { rcSysActionL1 }
|
|
STATUS current
|
|
DESCRIPTION "A rcSaveConfigAction trap indicates the switch run
|
|
time or boot configuration is being saved"
|
|
::= { rcTrapsMib 37 }
|
|
|
|
rcnLoopDetectOnPort NOTIFICATION-TYPE
|
|
OBJECTS { rcVlanId, rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcLoopDetectOnPort trap indicates that a loop has
|
|
been detected on a port. The vlan on that port will
|
|
be disabled."
|
|
::= { rcTrapsMib 38 }
|
|
|
|
rcnbgpEstablished NOTIFICATION-TYPE
|
|
OBJECTS { rcIpBgpPeerIpAddress,
|
|
rcIpBgpPeerLastError,
|
|
rcIpBgpPeerState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGP Established event is generated when
|
|
the BGP FSM enters the ESTABLISHED state."
|
|
::= { rcTrapsMib 39 }
|
|
|
|
rcnbgpBackwardTransition NOTIFICATION-TYPE
|
|
OBJECTS { rcIpBgpPeerIpAddress,
|
|
rcIpBgpPeerLastError,
|
|
rcIpBgpPeerState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BGPBackwardTransition Event is generated
|
|
when the BGP FSM moves from a higher numbered
|
|
state to a lower numbered state."
|
|
::= { rcTrapsMib 40 }
|
|
|
|
rcnAggLinkUp NOTIFICATION-TYPE
|
|
OBJECTS { rcMltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcAggLinkUp trap is generated when the operational
|
|
state of the aggregator changes from down to up."
|
|
::= { rcTrapsMib 41 }
|
|
|
|
rcnAggLinkDown NOTIFICATION-TYPE
|
|
OBJECTS { rcMltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcAggLinkDown trap is generated when the operational
|
|
state of the aggregator changes from up to down."
|
|
::= { rcTrapsMib 42 }
|
|
|
|
rcnIgmpNewGroupMember NOTIFICATION-TYPE
|
|
OBJECTS { rcIgmpGroupIfIndex,
|
|
rcIgmpGroupIpAddress,
|
|
rcIgmpGroupInPort,
|
|
rcIgmpGroupMembers }
|
|
STATUS current
|
|
DESCRIPTION "An IgmpNewGroupMember trap signifies that a
|
|
new member has come on an interface."
|
|
::= { rcTrapsMib 43 }
|
|
|
|
rcnIgmpLossGroupMember NOTIFICATION-TYPE
|
|
OBJECTS { rcIgmpGroupMembers,
|
|
rcIgmpGroupIpAddress,
|
|
rcIgmpGroupInPort,
|
|
rcIgmpGroupIfIndex }
|
|
STATUS current
|
|
DESCRIPTION "An IgmpLossGroupMember trap signifies that a
|
|
group member has been lost on an interface."
|
|
::= { rcTrapsMib 44 }
|
|
|
|
rcnIgmpNewQuerier NOTIFICATION-TYPE
|
|
-- cannot include igmpInterfaceIfIndex in the OBJECTS clause because it
|
|
-- is not-accessible
|
|
-- OBJECTS { igmpInterfaceIfIndex, igmpInterfaceQuerier }
|
|
STATUS current
|
|
DESCRIPTION "An igmpNewQuerier trap signifies that a new
|
|
querier has come up on an interface."
|
|
::= { rcTrapsMib 45 }
|
|
|
|
|
|
rcnIgmpQuerierChange NOTIFICATION-TYPE
|
|
-- cannot include igmpInterfaceIfIndex in the OBJECTS clause because it
|
|
-- is not-accessible
|
|
-- OBJECTS { igmpInterfaceIfIndex,
|
|
-- rcIgmpInterfaceExtnNewQuerier,
|
|
-- igmpInterfaceQuerier }
|
|
STATUS current
|
|
DESCRIPTION "An rcIgmpQuerierChange trap signifies that
|
|
the querier has changed."
|
|
::= { rcTrapsMib 46 }
|
|
|
|
rcnDvmrpIfStateChange NOTIFICATION-TYPE
|
|
-- Cannot use these, as they are either not-accessible, or no longer exist
|
|
-- in the current draft of the DVMRP-STD-MIB
|
|
-- OBJECTS { dvmrpInterfaceIfIndex, dvmrpInterfaceOperState }
|
|
STATUS current
|
|
DESCRIPTION "A rcDvmrpIfStateChange trap signifies that there
|
|
has been a change in the state of a DVMRP
|
|
interface."
|
|
::= { rcTrapsMib 47 }
|
|
|
|
rcnDvmrpNewNbrChange NOTIFICATION-TYPE
|
|
-- Cannot use these, as they are either not-accessible, or no longer exist
|
|
-- in the current draft of the DVMRP-STD-MIB
|
|
-- OBJECTS { dvmrpNeighborIfIndex, dvmrpNeighborAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcDvmrpNewNbrChange trap signifies that a new
|
|
neighbor has come up on a DVMRP interface."
|
|
::= { rcTrapsMib 48 }
|
|
|
|
rcnDvmrpNbrLossChange NOTIFICATION-TYPE
|
|
-- Cannot use these, as they are either not-accessible, or no longer exist
|
|
-- in the current draft of the DVMRP-STD-MIB
|
|
-- OBJECTS { dvmrpNeighborIfIndex,
|
|
-- dvmrpNeighborAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcDvmrpNbrLossChange trap signifies that a new
|
|
neighbor has gone down on a DVMRP interface."
|
|
::= { rcTrapsMib 49 }
|
|
|
|
rcnPsePortOnOff NOTIFICATION-TYPE
|
|
-- Cannot include pethPsePortGroupIndex or pethPsePortIndex in OBJECTS
|
|
-- clause because they are not-accessible
|
|
-- OBJECTS { pethPsePortGroupIndex,
|
|
-- pethPsePortIndex,
|
|
-- pethPsePortDetectionStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcPsePortOnOff trap signifies that if
|
|
Pse Port is delivering or not power to the
|
|
This Notification SHOULD be sent on every
|
|
status change except in the searching mode."
|
|
::= { rcTrapsMib 50 }
|
|
|
|
rcnPsePortPowerMaintenanceStatus NOTIFICATION-TYPE
|
|
-- pethPsePortPowerMaintenanceStatus no longer exists, cannot use it here
|
|
-- Also, cannot include pethPsePortGroupIndex or pethPsePortIndex in OBJECTS
|
|
-- clause because they are not-accessible
|
|
-- OBJECTS { pethPsePortGroupIndex,
|
|
-- pethPsePortIndex,
|
|
-- pethPsePortPowerMaintenanceStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcPsePortPowerMaintenanceStatus trap
|
|
signifies that a Port change Status and
|
|
it SHOULD be sent on every status change."
|
|
::= { rcTrapsMib 51 }
|
|
|
|
rcnMainPseBackupActivate NOTIFICATION-TYPE
|
|
-- Cannot include pethPsePortGroupIndex or pethPsePortIndex in OBJECTS
|
|
-- clause because they are not-accessible
|
|
-- OBJECTS { pethPsePortGroupIndex,
|
|
-- pethPsePortIndex,
|
|
-- pethMainPseBackupActivated }
|
|
STATUS current
|
|
DESCRIPTION "A rcMainPseBackupActivate trap signifies that
|
|
a Backup is Activated or BackUp is released
|
|
on a Pse Port Group."
|
|
::= { rcTrapsMib 52 }
|
|
|
|
rcnMainPowerUsageOn NOTIFICATION-TYPE
|
|
-- Cannot include pethPsePortGroupIndex or pethPsePortIndex in OBJECTS
|
|
-- clause because they are not-accessible
|
|
-- OBJECTS { pethPsePortGroupIndex,
|
|
-- pethMainPseConsumptionPower }
|
|
STATUS current
|
|
DESCRIPTION "A rcMainPowerUsageOn trap signifies that
|
|
PSE Threshold Usage indication of a PSE
|
|
Port Group is on, the usage power is above
|
|
the threshold."
|
|
::= { rcTrapsMib 53 }
|
|
|
|
rcnMainPowerUsageOff NOTIFICATION-TYPE
|
|
-- Cannot include pethPsePortGroupIndex or pethPsePortIndex in OBJECTS
|
|
-- clause because they are not-accessible
|
|
-- OBJECTS { pethPsePortGroupIndex,
|
|
-- pethMainPseConsumptionPower }
|
|
STATUS current
|
|
DESCRIPTION "A rcMainPowerUsageOn trap signifies that
|
|
PSE Threshold Usage indication of a PSE
|
|
Port Group is off, the usage power is above
|
|
the threshold."
|
|
::= { rcTrapsMib 54 }
|
|
|
|
rcnPseCardOnOff NOTIFICATION-TYPE
|
|
OBJECTS { rcPortPoeMainPseExtnPwrAdmin }
|
|
STATUS current
|
|
DESCRIPTION "A rcPoeMainPwrFailure trap signifies that the
|
|
main power admin status is up."
|
|
::= { rcTrapsMib 55 }
|
|
|
|
rcnFdbProtectViolation NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
rcVlanId }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rcFdbProtectViolation trap signifies that the
|
|
has violated the user configured limit for total
|
|
number of fdb-entries learned on that port."
|
|
::= { rcTrapsMib 59 }
|
|
|
|
|
|
rcnLogMsgControl NOTIFICATION-TYPE
|
|
OBJECTS { rcSysMsgLogFrequency, rcSysMsgLogText }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A rcMsgControl trap signifies whether the number of times of
|
|
repeatation of the particular Log message has exceeded
|
|
the particular frequency/count or not."
|
|
::= { rcTrapsMib 60 }
|
|
|
|
|
|
-- New trap for save config. Q00826011
|
|
rcnSaveConfigFile NOTIFICATION-TYPE
|
|
OBJECTS { rcSysActionL1, rcSysConfigFileName }
|
|
STATUS current
|
|
DESCRIPTION "A rcSaveConfig trap signifies that either the
|
|
runtime config or the boot config has been saved
|
|
on the switch"
|
|
::= { rcTrapsMib 61 }
|
|
|
|
rcnDNSRequestResponse NOTIFICATION-TYPE
|
|
OBJECTS { rcSysDnsServerListIpAddr, rcSysDnsRequestType }
|
|
STATUS current
|
|
DESCRIPTION "A rcDnsRequestResponse trap signifies that the
|
|
switch had sent a query to the DNS server or it had
|
|
received a successful response from the DNS Server"
|
|
::= { rcTrapsMib 62 }
|
|
|
|
rcnDuplicateIpAddress NOTIFICATION-TYPE
|
|
OBJECTS { ipNetToMediaNetAddress,ipNetToMediaPhysAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A rcDuplicateIpAddress trap signifies that a duplicate IP
|
|
address is detected on the subnet."
|
|
::= { rcTrapsMib 63 }
|
|
|
|
rcnLoopDetectPortDown NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,ifAdminStatus,ifOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A rcLoopDetectPortDown trap signifies that a loop has been
|
|
detected on a port and the port is going to shut down."
|
|
::= { rcTrapsMib 64 }
|
|
|
|
rcnUnauthorizedAccessToStandByCPU NOTIFICATION-TYPE
|
|
OBJECTS { rcSysIpAddr }
|
|
STATUS current
|
|
DESCRIPTION "A rcnUnauthorizedAccessToStandByCPU trap
|
|
signifies that the user attempt to access
|
|
standby CPU."
|
|
::= { rcTrapsMib 65 }
|
|
|
|
|
|
rcnLoopDetectMacDiscard NOTIFICATION-TYPE
|
|
OBJECTS { rcBridgeNewFdbAddress, rcPortIndex, rcPortIndex, rcSysMacFlapLimitTime,
|
|
rcSysMacFlapLimitCount}
|
|
STATUS current
|
|
DESCRIPTION "A rcLoopDetectMacDiscard trap signifies that a loop
|
|
has been Detected on a port and the mac address will
|
|
be discarded on all ports in that vlan"
|
|
::= { rcTrapsMib 67}
|
|
|
|
rcnAutoRecoverPort NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnAutoRecoverPort trap signifies that autorecover
|
|
has re-enabled a port disabled by link flap or cp limit"
|
|
::= {rcTrapsMib 68 }
|
|
|
|
rcnAutoRecoverLoopDetectedPort NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcVlanNewLoopDetectedAction }
|
|
STATUS current
|
|
DESCRIPTION "A rcnAutoRecoverPort trap signifies that autorecover
|
|
has cleared the action taken on a port by loop detect"
|
|
::= {rcTrapsMib 69 }
|
|
|
|
rcnExtCpLimitShutDown NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
ifAdminStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A rcnExtCpLimitShutDown trap signifies that
|
|
port is shut down due to Extended CP-Limit."
|
|
::= { rcTrapsMib 70 }
|
|
|
|
rcnExtCpLimitSopCongestion NOTIFICATION-TYPE
|
|
OBJECTS { rcSysExtCplimitSysOctapidCongested,
|
|
rcSysExtCplimitPortsMonitored
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A rcnExtCpLimitSopCongestion signifies that system octapid
|
|
polling finds that system octapid is congested or not.
|
|
rcSysExtCplimitSysOctapidCongested signifies whether
|
|
system octapid is congested or not.
|
|
rcSysExtCplimitPortsMonitored signifies whether ports are
|
|
selected for monitoring the ingress traffic utilization."
|
|
::= {rcTrapsMib 71 }
|
|
|
|
rcnNonEapIntrusion NOTIFICATION-TYPE
|
|
OBJECTS { rcErrorText, rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcNonEapIntrusion trap signifies that the
|
|
an intrusion has occurred in the port. This occurs when
|
|
the number of non-eap clients exceed the maximum allowed
|
|
non-eap clients on the port "
|
|
::= { rcTrapsMib 72 }
|
|
|
|
--TACACS+
|
|
|
|
rcnTacacsAuthFailure NOTIFICATION-TYPE
|
|
OBJECTS { rcTacacsGlobalLastUserName }
|
|
STATUS current
|
|
DESCRIPTION "TACACS+ authentication failed for user"
|
|
::= { rcTrapsMib 74 }
|
|
|
|
rcnTacacsNoServers NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "Unable to use any TACACS+ servers for authentication"
|
|
::= { rcTrapsMib 75 }
|
|
|
|
rcnTacacsRxUnsupportedFrame NOTIFICATION-TYPE
|
|
OBJECTS { rcTacacsGlobalLastAddressType, rcTacacsGlobalLastAddress }
|
|
STATUS current
|
|
DESCRIPTION "Received unsupported frame from TACACS+ server"
|
|
::= { rcTrapsMib 76 }
|
|
|
|
rcnTacacsExceededMaxLogins NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "Attempted to exceed the maximum number of allowed TACACS+ logins"
|
|
::= { rcTrapsMib 77 }
|
|
|
|
rcnTacacsClientFailure NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "TACACS+ Client application is down"
|
|
::= { rcTrapsMib 78 }
|
|
|
|
rcnBpduReceived NOTIFICATION-TYPE
|
|
OBJECTS { rcPortBpduFilteringTimeout }
|
|
STATUS current
|
|
DESCRIPTION "This notification will be generated when a BPDU is
|
|
received on a port which has BPDU filtering enabled."
|
|
::= { rcTrapsMib 79 }
|
|
|
|
rcnVlacpPortDown NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex}
|
|
STATUS current
|
|
DESCRIPTION "A rcnVlacpPortDown trap signifies that
|
|
Vlacp is down on the port specified."
|
|
::= { rcTrapsMib 80 }
|
|
|
|
rcnVlacpPortUp NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex}
|
|
STATUS current
|
|
DESCRIPTION "A rcnVlacpPortUp trap signifies that
|
|
Vlacp is Up on the port specified."
|
|
::= { rcTrapsMib 81 }
|
|
|
|
rcnExtCpLimitShutDownNormal NOTIFICATION-TYPE
|
|
|
|
STATUS current
|
|
DESCRIPTION "An rcnExtCpLimitShutDownNormal trap signifies that
|
|
Ports are shut down due to Extended CP-Limit in Normal
|
|
mode."
|
|
::= { rcTrapsMib 82 }
|
|
|
|
rcnEapMacIntrusion NOTIFICATION-TYPE
|
|
OBJECTS {rcSysIpAddr, rcRadiusPaePortNumber,
|
|
rcRadiusEapLastAuthMac, rcRadiusEapLastRejMac}
|
|
STATUS current
|
|
DESCRIPTION "A rcnEapMacIntrusion trap signifies that
|
|
an EAP MAC intrusion has occured on this Port."
|
|
::= { rcTrapsMib 83 }
|
|
|
|
rcnInterCpuCommStatus NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcCardOperStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcnInterCpuCommStatus trap signifies the
|
|
current communication status between primary
|
|
and secondary CPU."
|
|
::= { rcTrapsMib 84 }
|
|
|
|
-- The following are traps that will notify the network management of changes
|
|
-- in the status (normal,warning,alarm) of DDI variables
|
|
|
|
rcPlugOptModTemperatureStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcPlugOptModTemperatureStatus }
|
|
STATUS current
|
|
DESCRIPTION "Used to trap changes in the temperature status"
|
|
::= { rcTrapsMib 89}
|
|
|
|
rcPlugOptModVoltageStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcPlugOptModVoltageStatus }
|
|
STATUS current
|
|
DESCRIPTION "Used to trap changes in the voltage level"
|
|
::= { rcTrapsMib 90 }
|
|
|
|
rcPlugOptModBiasStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcPlugOptModBiasStatus }
|
|
STATUS current
|
|
DESCRIPTION "Used to trap changes in the laser bias status"
|
|
::= { rcTrapsMib 91 }
|
|
|
|
rcPlugOptModTxPowerStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcPlugOptModTxPowerStatus }
|
|
STATUS current
|
|
DESCRIPTION "Used to trap changes in the transmit power status"
|
|
::= { rcTrapsMib 92 }
|
|
|
|
rcPlugOptModRxPowerStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcPlugOptModRxPowerStatus}
|
|
STATUS current
|
|
DESCRIPTION "Used to trap changes in the received power status"
|
|
::= { rcTrapsMib 93 }
|
|
|
|
rcPlugOptModAux1StatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
rcPlugOptModAux1Monitoring,
|
|
rcPlugOptModAux1Status }
|
|
STATUS current
|
|
DESCRIPTION "Used to trap changes in the Aux1 status"
|
|
::= { rcTrapsMib 94 }
|
|
|
|
rcPlugOptModAux2StatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
rcPlugOptModAux2Monitoring,
|
|
rcPlugOptModAux2Status }
|
|
STATUS current
|
|
DESCRIPTION "Used to trap changes in the Aux2 status"
|
|
::= { rcTrapsMib 95 }
|
|
|
|
rcnMaxRouteWarnClear NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnMaxRouteWarnClear trap signifies that
|
|
the number of routes in the routing table of
|
|
the Virtual Router has droped below its
|
|
warning threshold."
|
|
::= { rcTrapsMib 110 }
|
|
|
|
rcnMaxRouteWarnSet NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnMaxRouteWarnSet trap signifies that
|
|
the given Virtual Routers routing table is
|
|
reaching its maximum size. Action should be
|
|
taken to prevent this"
|
|
::= { rcTrapsMib 111 }
|
|
|
|
rcnMaxRouteDropClear NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnMaxRouteDropClear signifies that
|
|
the given Virtual Routers routing table is
|
|
no longer dropping new routes as it is below
|
|
its maximum size."
|
|
::= { rcTrapsMib 112 }
|
|
|
|
rcnMaxRouteDropSet NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnMaxRouteDropSet trap signifies that
|
|
the given Virtual Routers routing table has
|
|
reached its maximum size, and is now dropping
|
|
all new non static routes."
|
|
::= { rcTrapsMib 113 }
|
|
|
|
rcnTrialPeriodExpired NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "Trial period expired."
|
|
::= { rcTrapsMib 114 }
|
|
|
|
rcnVrfForwardingEnabled NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnVrfForwardingEnable trap signifies that
|
|
the given Virtual Router's route forwarding
|
|
is enabled. The VRF is functioning normally."
|
|
::= { rcTrapsMib 115 }
|
|
|
|
rcnVrfForwardingDisabled NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnVrfForwardingDisabletrap signifies that
|
|
the given Virtual Router's route forwarding
|
|
is disabled. The VRF is no longer forwarding
|
|
routes."
|
|
::= { rcTrapsMib 116 }
|
|
|
|
rcnMstpNewCistRoot NOTIFICATION-TYPE
|
|
OBJECTS { rcStgBridgeAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcMstpNewCistRoottrap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Multiple Spanning Tree Protocol has
|
|
declared the device to be the new root of the common
|
|
internal spanning tree."
|
|
::= { rcTrapsMib 117 }
|
|
|
|
|
|
rcnMstpNewMstiRoot NOTIFICATION-TYPE
|
|
OBJECTS { rcStgBridgeAddress, rcStgId }
|
|
STATUS current
|
|
DESCRIPTION "A rcMstpNewMstiRoot signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Multiple Spanning Tree Protocol has
|
|
declared the device to be the new root of the
|
|
spanning tree instance."
|
|
::= { rcTrapsMib 118 }
|
|
|
|
rcnMstpNewCistRegionalRoot NOTIFICATION-TYPE
|
|
OBJECTS { rcStgBridgeAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcMstpNewCistRegionalRoottrap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Multiple Spanning Tree Protocol has
|
|
declared the device to be the new regional root of
|
|
the common internal spanning tree."
|
|
::= { rcTrapsMib 119 }
|
|
|
|
rcnRstpNewRoot NOTIFICATION-TYPE
|
|
OBJECTS { rcStgBridgeAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcRstpNewRoot signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Rapid Spanning Tree Protocol has
|
|
declared the device to be the new root of the
|
|
spanning tree."
|
|
::= { rcTrapsMib 120 }
|
|
|
|
rcnIgmpNewQuerierOnIf NOTIFICATION-TYPE
|
|
OBJECTS { rcIgmpInterfaceIfIndex,
|
|
rcIgmpInterfaceQuerier }
|
|
STATUS current
|
|
DESCRIPTION "An igmpNewQuerier trap signifies that a new
|
|
querier has come up on an interface."
|
|
::= { rcTrapsMib 121 }
|
|
|
|
rcnIgmpQuerierChanged NOTIFICATION-TYPE
|
|
OBJECTS { rcIgmpInterfaceIfIndex,
|
|
rcIgmpInterfaceExtnNewQuerier,
|
|
rcIgmpInterfaceQuerier }
|
|
STATUS current
|
|
DESCRIPTION "An rcIgmpQuerierChange trap signifies that
|
|
the querier has changed."
|
|
::= { rcTrapsMib 122 }
|
|
|
|
rcnDuplexMismatch NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,lldpRemPortIdSubtype,lldpRemPortId }
|
|
STATUS current
|
|
DESCRIPTION "A rcnDuplexMismatch trap signifies that
|
|
a LLDP Neighbor Port's Duplex/Speed mismatchs
|
|
with local port"
|
|
::= { rcTrapsMib 123 }
|
|
|
|
rcnRsmltEdgePeerModified NOTIFICATION-TYPE
|
|
OBJECTS { rcVlanName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnRsmltEdgePeerModified signifies that
|
|
the RSMLT Peer address is different from
|
|
that of the stored address. Save config is
|
|
necessary if EdgeSupport has to use this info
|
|
on next reboot."
|
|
::= { rcTrapsMib 124 }
|
|
|
|
rcn2kLinkDownTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
ifAdminStatus,
|
|
ifOperStatus,
|
|
rcPortUserLabel1,
|
|
rcPortUserLabel2 }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A linkDown trap signifies that the SNMP entity, acting in
|
|
an agent role, has detected that the ifOperStatus object for
|
|
one of its communication links is about to enter the down
|
|
state from some other state (but not from the notPresent
|
|
state). This other state is indicated by the included value
|
|
of ifOperStatus."
|
|
::= { rcTrapsMib 125 }
|
|
|
|
rcn2kLinkUpTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
ifAdminStatus,
|
|
ifOperStatus,
|
|
rcPortUserLabel1,
|
|
rcPortUserLabel2 }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A linkUp trap signifies that the SNMP entity, acting in an
|
|
agent role, has detected that the ifOperStatus object for
|
|
one of its communication links left the down state and
|
|
transitioned into some other state (but not into the
|
|
notPresent state). This other state is indicated by the
|
|
included value of ifOperStatus."
|
|
::= { rcTrapsMib 126 }
|
|
|
|
rcnPbtUnknownDiscardTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kChassisBaseMacAddr,
|
|
rcCfmRemoteMacAddr,
|
|
rcCfmTrunkSourceMac,
|
|
rcVlanId,
|
|
rcPortIndex,
|
|
rc2kChassisUserLabel1 }
|
|
STATUS current
|
|
DESCRIPTION "The number of UnknownMac Discard exceeded the threshold.
|
|
Make sure that the FDB entry exists for specified vlan
|
|
and that the port is a member of the vlan.
|
|
The chassis Mac address is given in
|
|
rc2kChassisBaseMacAddr which identifies the chassis "
|
|
::= { rcTrapsMib 130 }
|
|
|
|
|
|
rcnPbtUnknownDiscardClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kChassisBaseMacAddr,
|
|
rc2kChassisUserLabel1 }
|
|
STATUS current
|
|
DESCRIPTION "The number of UnknownMac Discard exceeded the threshold.
|
|
Make sure that the FDB entry exists for specified vlan
|
|
and that the port is a member of the vlan.
|
|
The chassis Mac address is given in
|
|
rc2kChassisBaseMacAddr which identifies the chassis "
|
|
::= { rcTrapsMib 131 }
|
|
|
|
rcn2kQosDropTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kChassisBaseMacAddr,
|
|
rc2kQosQosRow,
|
|
rcPortIndex,
|
|
rc2kQosQosDropThresholdPercentage,
|
|
rc2kQosQosDropActualPercentage,
|
|
rc2kChassisUserLabel1}
|
|
STATUS current
|
|
DESCRIPTION "Drop count of packets for a specific QoS level has exceeded the
|
|
configured threshold "
|
|
::= { rcTrapsMib 132}
|
|
|
|
rcn2kQosDropClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kChassisBaseMacAddr,
|
|
rc2kQosQosRow,
|
|
rcPortIndex,
|
|
rc2kQosQosDropThresholdPercentage,
|
|
rc2kQosQosDropActualPercentage,
|
|
rc2kChassisUserLabel1}
|
|
STATUS current
|
|
DESCRIPTION "Drop count of packets for a specific QoS level is with in the limits. Clears
|
|
rcTrapsMib 132."
|
|
::= { rcTrapsMib 133}
|
|
|
|
rcn2kGbicRemovedTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex,
|
|
rcPortIndex,
|
|
rcPortUserLabel1,
|
|
rcPortUserLabel2,
|
|
rc2kChassisUserLabel1 }
|
|
STATUS current
|
|
DESCRIPTION "A rcGbicRemoved trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
an Xfp/Sfp is removed from the specified slot and port."
|
|
::= { rcTrapsMib 143 }
|
|
|
|
rcn2kGbicInsertedTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex,
|
|
rcPortIndex,
|
|
rcPortUserLabel1,
|
|
rcPortUserLabel2,
|
|
rc2kChassisUserLabel1 }
|
|
STATUS current
|
|
DESCRIPTION "A rcGbicInserted trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
an Xfp/Sfp is inserted to the specified slot and port. "
|
|
::= { rcTrapsMib 144 }
|
|
|
|
rcn2kCardDownExpandedTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex,
|
|
rc2kCardFrontAdminStatus,
|
|
rc2kCardFrontOperStatus,
|
|
rc2kChassisUserLabel1 }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardDown trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the down state."
|
|
::= { rcTrapsMib 145 }
|
|
|
|
|
|
rcn2kCardUpExpandedTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex,
|
|
rc2kCardFrontAdminStatus,
|
|
rc2kCardFrontOperStatus,
|
|
rc2kChassisUserLabel1 }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardUp trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the up state.
|
|
Clears rcn2kCardDownExpanded."
|
|
::= { rcTrapsMib 146 }
|
|
|
|
rcnCSUStartTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcCsuGlobalStartUpMode }
|
|
STATUS current
|
|
DESCRIPTION "A rcCSUStartTrap trap signifies that
|
|
the controlled software upgrade has started
|
|
in the specified mode"
|
|
|
|
::= { rcTrapsMib 147 }
|
|
|
|
rcnCSUEndTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcCsuGlobalStartUpMode }
|
|
STATUS current
|
|
DESCRIPTION "A rcCSUEndTrap trap signifies that the
|
|
controlled software upgrade has ended in
|
|
the specified mode"
|
|
|
|
::= { rcTrapsMib 148 }
|
|
|
|
rcnCSUCardResetStartTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcCsuInfoTypeOfCardDesc, rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcCSUCardResetStartTrap trap signifies that
|
|
the card in the specified slot reset process
|
|
has started as part of the CSU"
|
|
|
|
::= { rcTrapsMib 149 }
|
|
|
|
rcnCSUCardResetEndTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcCsuInfoTypeOfCardDesc, rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcCSUCardResetEndTrap trap signifies that
|
|
the card in the specified slot reset process
|
|
has ended as part of the CSU"
|
|
|
|
::= { rcTrapsMib 150 }
|
|
|
|
rcnCSUInProgressTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcCSUInProgressTrap signifies that the CSU
|
|
in progress and some cards need to be upgraded"
|
|
|
|
::= { rcTrapsMib 151 }
|
|
|
|
rcnMltLinkUp NOTIFICATION-TYPE
|
|
OBJECTS { rcMltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcMltLinkUp trap signifies that the
|
|
MLT link is up."
|
|
::= { rcTrapsMib 160 }
|
|
|
|
rcnMltLinkDown NOTIFICATION-TYPE
|
|
OBJECTS { rcMltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcMltLinkDown trap signifies that the
|
|
MLT link is down."
|
|
::= { rcTrapsMib 161 }
|
|
|
|
rcnLinkBadConnection NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnLinkBadConnection trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected a bad fiber connection to the receiver
|
|
on the specified port."
|
|
::= { rcTrapsMib 162 }
|
|
|
|
rcnMcInRecMoreThanThreshold NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "An rcnMcInRecMoreThanThreshold signifies that
|
|
number of MC Ingress records has exceeded the
|
|
configured ingress-threshold."
|
|
::= { rcTrapsMib 163 }
|
|
|
|
rcnMcEgRecMoreThanThreshold NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "An rcnMcEgRecMoreThanThreshold signifies that
|
|
number of MC Egress records has exceeded the
|
|
configured Egress-threshold."
|
|
::= { rcTrapsMib 164 }
|
|
|
|
rcnTmuxParityError NOTIFICATION-TYPE
|
|
OBJECTS {rc2kDeviceGlobalSlot}
|
|
STATUS current
|
|
DESCRIPTION "A rcnTmuxParityError trap identifies a problem in the FAD
|
|
/SWIP based on the number of parity errors."
|
|
::= { rcTrapsMib 165 }
|
|
|
|
rcnChasPowerSupplyNoRedundancy NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnChasPowerSupplyNoRedundancy signifies that
|
|
the chassis is running on power supply without
|
|
redundancy."
|
|
::= { rcTrapsMib 167 }
|
|
|
|
rcnChasPowerSupplyRedundancy NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnChasPowerSupplyRedundancy signifies that
|
|
the chassis is running on power supply with
|
|
redundancy."
|
|
::= { rcTrapsMib 168 }
|
|
|
|
rcnPortAdminStatusChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
ifAdminStatus }
|
|
STATUS current
|
|
DESCRIPTION "In an event of admin status change from enable
|
|
to disable or vice-versa, this trap is sent
|
|
to notify change in admin status"
|
|
::= { rcTrapsMib 169 }
|
|
|
|
rcnSaveConfigFailTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcSysConfigFileName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnSaveConfigFail trap signifies that the
|
|
runtime config save is unsuccessful on the
|
|
switch"
|
|
::= { rcTrapsMib 170 }
|
|
|
|
rcnLicenseTrialPeriodExpired NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnLicenseTrialPeriodExpired signifies that
|
|
Trial Period License has expired."
|
|
::= { rcTrapsMib 171 }
|
|
|
|
rcnLicenseTrialPeriodExpiry NOTIFICATION-TYPE
|
|
OBJECTS { rcSysLicenseTrialDaysLeft }
|
|
STATUS current
|
|
DESCRIPTION "A rcnLicenseTrialPeriodExpiry signifies
|
|
the time remaining before License Trial Period
|
|
expires in days."
|
|
::= { rcTrapsMib 172 }
|
|
|
|
rcnVrfUp NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName, rcVrfOperStatus }
|
|
STATUS current
|
|
DESCRIPTION "This notification is generated when the specified
|
|
VRF's operational status is toggled from down to up."
|
|
::= { rcTrapsMib 173 }
|
|
|
|
rcnVrfDown NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName, rcVrfOperStatus }
|
|
STATUS current
|
|
DESCRIPTION "This notification is generated when the specified
|
|
VRF's operational status is toggled from up to down."
|
|
::= { rcTrapsMib 174 }
|
|
|
|
-- CR Q01741872 : Added the mibs rcnMrouteIngressThresholdExceeded and
|
|
-- rcnMrouteEgressThresholdExceeded
|
|
|
|
rcnMrouteIngressThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS { rcIpResourceUsageGlobalIngressRecInUse,
|
|
rcIpResourceUsageGlobalIngressThreshold }
|
|
STATUS current
|
|
DESCRIPTION "This notification is generated when the number of
|
|
mroute ingress records exceeds the ingress threshold."
|
|
::= { rcTrapsMib 175 }
|
|
|
|
rcnMrouteEgressThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS { rcIpResourceUsageGlobalEgressRecInUse,
|
|
rcIpResourceUsageGlobalEgressThreshold }
|
|
STATUS current
|
|
DESCRIPTION "This notification is generated when the number of
|
|
mroute egress records exceeds the egress threshold."
|
|
::= { rcTrapsMib 176 }
|
|
|
|
rcnRemoteMirroringStatus NOTIFICATION-TYPE
|
|
OBJECTS { rcPortRemoteMirroringIndex,
|
|
rcPortRemoteMirroringEnable,
|
|
rcPortRemoteMirroringMode }
|
|
STATUS current
|
|
DESCRIPTION " A rcRemoteMirroringStatus trap signifies whether
|
|
the remote mirroring is enabled
|
|
or disabled on a particular port"
|
|
::= { rcTrapsMib 177 }
|
|
|
|
rcnMaxMrouteWarnSet NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnMaxMrouteWarnSet trap signifies that
|
|
the given Virtual Routers multicast routing table is
|
|
reaching its maximum size. Action should be
|
|
taken to prevent this"
|
|
::= { rcTrapsMib 178 }
|
|
|
|
rcnMaxMrouteDropSet NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnMaxMrouteDropSet trap signifies that
|
|
the given Virtual Routers multicast routing table has
|
|
reached its maximum size, and is now dropping all
|
|
new non static routes"
|
|
::= { rcTrapsMib 179 }
|
|
|
|
rcnMaxMrouteWarnClear NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnMaxMrouteWarnClear trap signifies that
|
|
the number of routes in the multicast routing table of
|
|
the Virtual Router has dropped below its
|
|
warning threshold."
|
|
::= { rcTrapsMib 180 }
|
|
|
|
rcnMaxMrouteDropClear NOTIFICATION-TYPE
|
|
OBJECTS { rcVrfName }
|
|
STATUS current
|
|
DESCRIPTION "A rcnMaxMrouteDropClear trap signifies that
|
|
the given Virtual Routers multicast routing table is
|
|
no longer dropping new routes as it is below
|
|
its maximum size."
|
|
::= { rcTrapsMib 181 }
|
|
|
|
rcnAggLinkStateChange NOTIFICATION-TYPE
|
|
OBJECTS {rcMltId, rcMltAggTrapEvent}
|
|
STATUS current
|
|
DESCRIPTION "The trap is generated when the operational state
|
|
of the LAG changes; it identifies three events:
|
|
local down, remote down, up."
|
|
::= { rcTrapsMib 182 }
|
|
|
|
rcnBfdSessExceedThreshold NOTIFICATION-TYPE
|
|
OBJECTS { rcBfdTmpSessDiscriminator,rcBfdTmpSessAddr }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcnBfdSessExceedThreshold signifies that
|
|
the BFD session have exceed system limit and hence
|
|
creation of new session failed.Deprecated by rcnaBfdSessExceedThreshold."
|
|
::= { rcTrapsMib 183 }
|
|
|
|
rcnBfdStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { rcBfdTmpSessDiscriminator, rcBfdTmpSessRemoteDiscr, rcBfdTmpSessAddr,
|
|
rcBfdTmpSessState, rcBfdTmpSessState }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcnBfdSessChange signifies that the status
|
|
of BFD session changed.Deprecated by rcnaBfdNewStatusChange"
|
|
::= { rcTrapsMib 184 }
|
|
|
|
rcnChasPowerSupplyRunningLow NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnChasPowerSupplyRunningLow signifies that
|
|
the chassis is running on low power supply."
|
|
::= { rcTrapsMib 185 }
|
|
|
|
rcnTosBufferLimitTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcErrorText }
|
|
STATUS current
|
|
DESCRIPTION "A TOS Buffer limit trap signifies that the
|
|
TOS Buffer value does not fall within the
|
|
permissible limit"
|
|
::= { rcTrapsMib 188 }
|
|
|
|
rcnTosBufferClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcErrorText }
|
|
STATUS current
|
|
DESCRIPTION "A TOS Buffer clear trap signifies that the
|
|
TOS Buffer corruption is now cleared"
|
|
::= { rcTrapsMib 189 }
|
|
|
|
rcnChasCoolingInsufficientTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnChasCoolingInsufficientTrap trap signifies
|
|
that the fan tray(s) is not providing sufficient
|
|
cooling power for the chassis configuration and
|
|
that a fan tray upgrade is recommended. This
|
|
trap is cleared by rcnChasCoolingSufficientTrap."
|
|
::= { rcTrapsMib 190}
|
|
|
|
rcnChasCoolingSufficientTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "rcnChasCoolingSufficientTrap trap signifies
|
|
that the fan tray(s) is now providing sufficient
|
|
cooling power for the chassis. Clears
|
|
rcnChasCoolingInsufficientTrap."
|
|
::= { rcTrapsMib 191}
|
|
|
|
rcnIsisPlsbMetricMismatchTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisLocalLspId,
|
|
rcIsisLocall1Metric,
|
|
rcIsisNgbLspId,
|
|
rcIsisNgbl1Metric,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator,
|
|
rcIsisLocalHostName,
|
|
rcIsisNgbHostName}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that a LSP with a different
|
|
value of l1-metric is received"
|
|
::= { rcTrapsMib 192 }
|
|
|
|
rcnIsisPlsbDuplicateSysidTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisLocalSysId,
|
|
rcIsisLocalInterface,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that a Hello packet with a
|
|
duplicate system-id is received"
|
|
::= { rcTrapsMib 193 }
|
|
rcnIsisPlsbLsdbUpdateTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisPlsbTrapType}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that LSDB information has
|
|
changed"
|
|
::= { rcTrapsMib 194 }
|
|
|
|
rcnIsisPlsbDuplicateNicknameTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisLocalNickname,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisNgbNickname,
|
|
rcIsisTrapIndicator,
|
|
rcIsisNgbSysId}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that a LSP with duplicate
|
|
nickname is received"
|
|
::= { rcTrapsMib 195 }
|
|
|
|
rcnChasFanCoolingLow NOTIFICATION-TYPE
|
|
OBJECTS { rcChasFanOperStatus, rcChasFanType,
|
|
rcErrorLevel, rcErrorText } -- Q01859608
|
|
STATUS current
|
|
DESCRIPTION "A rcnChasFanCoolingLow signifies that
|
|
the chassis is running on low fan cooling."
|
|
::= { rcTrapsMib 196 }
|
|
|
|
rcnRSlotFabricActiveTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnTripodSlotRStateActiveTrap signifies that Slot R mapped
|
|
to Slot 5 or Slot 6."
|
|
::= { rcTrapsMib 199 }
|
|
|
|
rcnRSlotFabricInactiveTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnTripodSlotRStateInactiveTrap signifies that Slot R unmapped
|
|
from Slot 5 or Slot 6."
|
|
::= { rcTrapsMib 200 }
|
|
|
|
rcnLockupDetected NOTIFICATION-TYPE
|
|
OBJECTS {rc2kDeviceGlobalSlot}
|
|
STATUS current
|
|
DESCRIPTION "A rcnLockupDetected trap identifies a lock-up in the specified
|
|
module and requests the user to take corrective action"
|
|
::= { rcTrapsMib 201 }
|
|
|
|
rcnMacResetForLockup NOTIFICATION-TYPE
|
|
OBJECTS {rc2kDeviceGlobalSlot}
|
|
STATUS current
|
|
DESCRIPTION "A rcnMacResetForLockup trap is sent when lock-up was detected in
|
|
a slot and a mac reset has been done as a corrective action."
|
|
::= { rcTrapsMib 202 }
|
|
|
|
rcnModuleResetForLockup NOTIFICATION-TYPE
|
|
OBJECTS {rc2kDeviceGlobalSlot}
|
|
STATUS current
|
|
DESCRIPTION "A rcnModuleResetForLockup trap is sent when lock-up was detected in
|
|
a slot and a module has been reset as a corrective action."
|
|
::= { rcTrapsMib 203 }
|
|
|
|
rcnModuleFatalError NOTIFICATION-TYPE
|
|
OBJECTS {rc2kDeviceGlobalSlot}
|
|
STATUS current
|
|
DESCRIPTION "A rcnModuleFatalError trap is sent when a fatal error is detected in
|
|
a module and the user has to take corrective action."
|
|
::= { rcTrapsMib 204 }
|
|
|
|
rcnSmpFtpFail NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnSmpFtpFail trap signifies that Ftp/Tftp of a logfile
|
|
has failed in SMP (System Messagin Platform). Ftp of a
|
|
logfile fails when configured remote server is not
|
|
reachable or remote server is not configured."
|
|
::= { rcTrapsMib 205 }
|
|
|
|
rcnSmpLogFileDeleted NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnSmpLogFileDeleted trap signifies that a logfile
|
|
has been deleted from PCMCIA. Deletion of a logfile happens
|
|
when either FTP of the logfile is successful or PCMCIA has
|
|
no space to create another logfile."
|
|
::= { rcTrapsMib 206 }
|
|
|
|
rcnUpgradeSuccessful NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnUpgradeSuccessful signifies that
|
|
The switch upgraded successfully."
|
|
::= { rcTrapsMib 207 }
|
|
|
|
rcnUpgradeFailure NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnUpgradeFailure signifies that
|
|
The switch upgrade failed."
|
|
::= { rcTrapsMib 208 }
|
|
|
|
rcnVersionMisMatch NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnVersionMisMatch signifies that
|
|
The switch has CPUs on different software versions."
|
|
::= { rcTrapsMib 209 }
|
|
|
|
rcnHighCopUtil NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex,
|
|
rc2kCardPerfCPUUtilization }
|
|
STATUS current
|
|
DESCRIPTION "A rcnHighCopUtil signifies that the COP utilization has
|
|
exceeded for a given slot above the defined thereshold
|
|
limits"
|
|
::= { rcTrapsMib 210 }
|
|
|
|
rcnUpgradeSuccessfulAckRequired NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnUpgradeSuccessful signifies that
|
|
The switch upgraded successfully and acknowlwedgement is required."
|
|
::= { rcTrapsMib 228 }
|
|
|
|
rcnLacpNegotiated NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnLacpNegotiation signifies if Lacp
|
|
negotiation successful between link on both ends"
|
|
::= { rcTrapsMib 231 }
|
|
|
|
rcnLacpNotNegotiated NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnLacpNotNegotiation signifies if LACP not negotiated"
|
|
::= { rcTrapsMib 232 }
|
|
|
|
rcnCtrlPktRateLimitDropTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
rcPortCtrlPktDropLimit }
|
|
STATUS current
|
|
DESCRIPTION "This trap indicates that the number of control packets on the
|
|
port has exceeded the configured drop limit."
|
|
::= { rcTrapsMib 233 }
|
|
|
|
rcnCtrlPktRateLimitDropClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
rcPortCtrlPktDropLimit }
|
|
STATUS current
|
|
DESCRIPTION "This trap indicates that the count of Control Packets on the
|
|
port had exceeded the configured drop limit and is currently
|
|
within the configured limits. Clears rcnCtrlPktRateLimitDropTrap."
|
|
::= { rcTrapsMib 234 }
|
|
|
|
rcnCtrlPktRateLimitShutdownTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
rcPortCtrlPktShutdownLimit }
|
|
STATUS current
|
|
DESCRIPTION "This trap indicates that the count of Control Packets on the
|
|
port has exceeded the configured shutdown limit."
|
|
::= { rcTrapsMib 235 }
|
|
|
|
rcnCtrlPktRateLimitShutdownClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
rcPortCtrlPktShutdownLimit }
|
|
STATUS current
|
|
DESCRIPTION "This trap indicates that the count of Control Packets on the
|
|
port had exceeded the configured shutdown limit and is currently
|
|
within the configured limits. Clears rcnCtrlPktRateLimitShutdownTrap."
|
|
::= { rcTrapsMib 236 }
|
|
|
|
rcnAutoSaveFailed NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcnAutoSaveFailed signifies that Autosave of the configurations on the switch failed because of the lack of storage space."
|
|
::= { rcTrapsMib 258 }
|
|
|
|
|
|
rcnLegacyCardDetected NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnLegacyCardDetected trap signifies that a legacy card has
|
|
been detected on the cahssis, rc2kCardIndex indicates the slot
|
|
number of legacy card."
|
|
::= { rcTrapsMib 265 }
|
|
|
|
rcnPrFilterRspMemoryFull NOTIFICATION-TYPE
|
|
OBJECTS { rcPrFilterAclId,
|
|
rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnPrFilterRspMemoryFull trap signifies that RSP memory is
|
|
full for Power Ranger filter configuration. rcPrFilterAclId
|
|
indicates the ACL, on which ACL RSP memory full occurs.
|
|
rc2kCardIndex indicates the slot number, on which RSP memory
|
|
full event occurs."
|
|
::= { rcTrapsMib 266 }
|
|
|
|
rcnPrFilterStatsCntExst NOTIFICATION-TYPE
|
|
OBJECTS { rcPrFilterAclId,
|
|
rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnPrFilterStatsCntExst trap signifies that RSP filter stats
|
|
counters have been run out. When this happens, affected filters
|
|
won't get their counter updated by filter forwarding engine.
|
|
rcPrFilterAclId indicates the ACL, on which filter stats counter
|
|
exhaust occurs. rc2kCardIndex indicates the slot number, on which
|
|
filter stats counter exhaust occurs."
|
|
::= { rcTrapsMib 267 }
|
|
|
|
rcnAuthenticationSuccess NOTIFICATION-TYPE
|
|
OBJECTS { rcLoginUserName, rcLoginHostIpAddress }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcnAuthenticationSuccess trap signifies that a login
|
|
is success. Trap includes login username and host ip
|
|
It's deprecated by rcnaAuthenticationSuccess."
|
|
::= { rcTrapsMib 268 }
|
|
|
|
rcnCardInsert NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType }
|
|
STATUS current
|
|
DESCRIPTION "A rcnCardInsert trap signifies that a card/module
|
|
is inserted into the chassis"
|
|
::= { rcTrapsMib 269 }
|
|
|
|
rcnCardRemove NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType }
|
|
STATUS current
|
|
DESCRIPTION "A rcnCardRemove trap signifies that a card/module
|
|
is removed from the chassis"
|
|
::= { rcTrapsMib 270 }
|
|
|
|
rcnChasFanFail NOTIFICATION-TYPE
|
|
OBJECTS { rcFanZoneType, rcFanTrayId, rcFanUnitId }
|
|
STATUS current
|
|
DESCRIPTION "A rcnChasFanFail trap indicates that a fan unit
|
|
of a fan tray in a fan zone has fault."
|
|
::= { rcTrapsMib 271 }
|
|
|
|
rcnChasFanOk NOTIFICATION-TYPE
|
|
OBJECTS { rcFanZoneType, rcFanTrayId, rcFanUnitId }
|
|
STATUS current
|
|
DESCRIPTION "A rcnChasFanOk trap indicates that a fan unit
|
|
of a fan tray in a fan zone has recovered from
|
|
previously detected fan fault."
|
|
::= { rcTrapsMib 272 }
|
|
|
|
rcnCardOverheat NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rcCardTemp }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcnCardOverheat trap indicates that a card temperature
|
|
has exceeded the alarm threshold temperature.
|
|
Starting from VSP9K 4.0 release, a new rcn2kCardOverheat
|
|
trap has been created that should be used instead of this trap.
|
|
This trap will become obsolete after a few releases."
|
|
::= { rcTrapsMib 273 }
|
|
|
|
rcnCardNormalTemp NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rcCardTemp }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcnCardNormalTemp trap indicates that a card
|
|
temperature has been cool down from previously detected
|
|
overheat condition.
|
|
Starting from VSP9K 4.0 release, a new rcn2kCardNormalTemp
|
|
trap has been created that should be used instead of this trap.
|
|
This trap will become obsolete after a few releases."
|
|
::= { rcTrapsMib 274 }
|
|
|
|
rcnCardOverheatShutDown NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rcCardTemp }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcnCardOverheatShutDown trap indicates that a card
|
|
has been shut down due to persistent temperature overheat
|
|
for 15 minutes or temperature has exceeded the shut down
|
|
threshold temperature.
|
|
Starting from VSP9K 4.0 release, a new rcn2kCardOverheatShutDown
|
|
trap has been created that should be used instead of this trap.
|
|
This trap will become obsolete after a few releases."
|
|
::= { rcTrapsMib 275 }
|
|
|
|
rcnCardCpuUtilizationHigh NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rcCpuUtilization }
|
|
STATUS current
|
|
DESCRIPTION "A rcnCardCpuUtilizationHigh trap indicates that 5-minute
|
|
CPU utilization average on this slot is above 90%."
|
|
::= { rcTrapsMib 276 }
|
|
|
|
rcnCardCpuUtilizationNormal NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rcCpuUtilization }
|
|
STATUS current
|
|
DESCRIPTION "A rcnCardCpuUtilizationNormal trap indicates that 5-minute
|
|
CPU utilization average on this slot is below 75%."
|
|
::= { rcTrapsMib 277 }
|
|
|
|
rcnIsisPlsbBvidMismatchTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisLocalSysId,
|
|
rcIsisLocalPrimaryBvid,
|
|
rcIsisLocalPrimaryTieBrkAlg,
|
|
rcIsisLocalSecondaryBvid,
|
|
rcIsisLocalSecondaryTieBrkAlg,
|
|
rcIsisNgbSysId,
|
|
rcIsisNgbPrimaryBvid,
|
|
rcIsisNgbPrimaryTieBrkAlg,
|
|
rcIsisNgbSecondaryBvid,
|
|
rcIsisNgbSecondaryTieBrkAlg,
|
|
rcIsisLocalBvidCounter,
|
|
rcIsisNgbBvidCounter,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator,
|
|
rcIsisNgbHostName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that a Hello packet with mismatched
|
|
B-VIDs is received"
|
|
::= { rcTrapsMib 278 }
|
|
|
|
rcnIsisPlsbSmltVirtBmacMismatchTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisLocalVirtualBmac,
|
|
rcIsisPeerVirtualBmac,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that Virtual BMAC configured in the switch
|
|
is different from virtual BMAC configured in the IST peer"
|
|
::= { rcTrapsMib 279 }
|
|
|
|
rcnIsisPlsbSmltPeerBmacMismatchTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisSysId,
|
|
rcIsisSmltPeerSysId,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that either the Smlt Peer BMAC configured
|
|
in the IST peer is different from the ISIS SystemId of the local switch OR
|
|
The Smlt peer BMAC configured in the local switch is different from
|
|
the ISIS systemId of the IST peer"
|
|
|
|
::= { rcTrapsMib 280 }
|
|
|
|
rcnIsisPlsbAdjStateTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisNgbSysId,
|
|
rcIsisLocalInterface,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisAdjState,
|
|
rcIsisNgbHostName}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies ISIS adjacency state change."
|
|
::= { rcTrapsMib 281 }
|
|
|
|
rcnIsisPlsbDuplicateNnameTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisNgbNickname,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator,
|
|
rcIsisNgbSysId,
|
|
rcIsisDuplicateNnameCounter,
|
|
rcIsisNgbHostName}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that a LSP with duplicate
|
|
nickname is received, this trap should be generated
|
|
by all the switches in the network."
|
|
::= { rcTrapsMib 282 }
|
|
|
|
rcnIsisPlsbSmltSplitBebMismatchTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisLocalSmltSplitBeb,
|
|
rcIsisPeerSmltSplitBeb,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that the Smlt Split-Beb configured in the local
|
|
switch and IST peer are same. One IST switch shoule be configured as
|
|
Split-Beb primary and the IST peer should be configured as Split-Beb
|
|
secondary."
|
|
|
|
::= { rcTrapsMib 283 }
|
|
|
|
rcnIsisPlsbMultiLinkAdjTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisNgbSysId,
|
|
rcIsisLocalInterface,
|
|
rcIsisPrevInterface,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisNgbHostName,
|
|
rcIsisTrapIndicator}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that multiple ISIS adjacencies are formed with
|
|
the same ISIS node."
|
|
|
|
::= { rcTrapsMib 284 }
|
|
|
|
|
|
rcnaSshSessionLogout NOTIFICATION-TYPE
|
|
OBJECTS { rcLoginHostAddressType, rcLoginHostInetAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcnaSshSessionLogout trap signifies that there
|
|
is a SSH session logout. This trap deprecates the
|
|
rcnSshSessionLogout trap."
|
|
::= { rcTrapsMib 285 }
|
|
|
|
rcnaSshUnauthorizedAccess NOTIFICATION-TYPE
|
|
OBJECTS { rcLoginHostAddressType, rcLoginHostInetAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcnaSshUnauthorizedAccess trap signifies that
|
|
an unauthorized access has occured. This trap
|
|
deprecates the rcnSshUnauthorizedAccess trap."
|
|
::= { rcTrapsMib 286 }
|
|
|
|
rcnaAuthenticationSuccess NOTIFICATION-TYPE
|
|
OBJECTS { rcLoginUserName, rcLoginHostAddressType, rcLoginHostInetAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcnaAuthenticationSuccess trap signifies that a login
|
|
is success. Trap includes login username and address
|
|
type and inet address. This trap deprecates the
|
|
rcnAuthenticationSuccess trap."
|
|
::= { rcTrapsMib 287 }
|
|
|
|
rcnaSshSessionLogin NOTIFICATION-TYPE
|
|
OBJECTS { rcLoginHostAddressType, rcLoginHostInetAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcnaSshSessionLogin trap signifies that there
|
|
is a SSH session login. This trap deprecates the
|
|
rcnSshSessionLogin trap."
|
|
::= { rcTrapsMib 288 }
|
|
|
|
rcnVLacpFlapDetectShutDown NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcVlacpFlapDetectShutDown trap signifies that the
|
|
port is shut down because rcPortVLacpFlapFrequency number of
|
|
VLACP flaps were detected within rcPortVLacpFlapInterval seconds
|
|
on this port.The port can be brought UP by toggling the port
|
|
admin state manually."
|
|
::= { rcTrapsMib 289 }
|
|
|
|
rcnAuthenticationFailureLoginAttemptsTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcCliPasswordAccountUserName,
|
|
rcCliPasswordUserAccessLevel }
|
|
STATUS current
|
|
DESCRIPTION "An rcnAuthenticationFailureLoginAttemptsTrap signifies
|
|
an unsuccessful login attempt by a user beyond the
|
|
maximum number of allowed login attempts."
|
|
::= { rcTrapsMib 291 }
|
|
|
|
rcnUserAccountIdleTimeExpireTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcCliPasswordAccountUserName,
|
|
rcCliPasswordUserAccessLevel }
|
|
STATUS current
|
|
DESCRIPTION "An rcnUserAccountIdleTimeExpireTrap signifies that
|
|
a user did not login within the idle time configured
|
|
and the account will not be disable."
|
|
::= { rcTrapsMib 292 }
|
|
|
|
rcnBfdNewStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { rcBfdTmpSessDiscriminator,
|
|
rcBfdTmpSessRemoteDiscr,
|
|
rcBfdTmpSessAddr,
|
|
rcBfdTmpSessState,
|
|
rcBfdTmpSessDestAddr,
|
|
rcBfdTmpSessOldState }
|
|
STATUS deprecated
|
|
DESCRIPTION "A rcnBfdNewStatusChange signifies that the status
|
|
of BFD session changed.Deprecated by rcnaBfdNewStatusChange."
|
|
::= { rcTrapsMib 293 }
|
|
|
|
rcnLacpMisconfig NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
rcLacpMisconfigType }
|
|
STATUS current
|
|
DESCRIPTION "A link aggregation misconfiguration trap signifies that,
|
|
this port is receiving LACP PDU without LACP being
|
|
configured completely."
|
|
::= { rcTrapsMib 294}
|
|
|
|
rcnaBfdStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { rcBfdTmpSessDiscriminator,
|
|
rcBfdTmpSessRemoteDiscr,
|
|
rcBfdTmpSessAddrType,
|
|
rcBfdTmpSessAddr,
|
|
rcBfdTmpSessState,
|
|
rcBfdTmpSessDestAddr,
|
|
rcBfdTmpSessOldState }
|
|
STATUS current
|
|
DESCRIPTION "A rcnaBfdNewStatusChange signifies that the status
|
|
of BFD session changed. rcBfdTmpSessAddrType
|
|
indicates the address type for rcBfdTmpSessAddr
|
|
and rcBfdTmpSessDestAddr.
|
|
This trap deprecates rcnBfdNewStatusChange."
|
|
::= { rcTrapsMib 296 }
|
|
|
|
|
|
rcnaBfdSessExceedThreshold NOTIFICATION-TYPE
|
|
OBJECTS { rcBfdTmpSessDiscriminator, rcBfdTmpSessAddrType,rcBfdTmpSessAddr }
|
|
STATUS current
|
|
DESCRIPTION "A rcnaBfdSessExceedThreshold signifies that
|
|
the BFD session has exceeded system limit and hence
|
|
creation of new session failed.This trap deprecates rcnBfdSessExceedThreshold."
|
|
::= { rcTrapsMib 297 }
|
|
|
|
rcMaxMacEntriesTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcMaxMacEntries trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the maximum number of supported Mac
|
|
Entries(64000) has been reached."
|
|
::= { rcTrapsMib 299 }
|
|
|
|
rcnSlotPowerAvailableTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rcSlotPowerStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcnSlotPowerAvailable trap signifies whether
|
|
there are enough power to boot up card in slot."
|
|
::= { rcTrapsMib 295 }
|
|
|
|
rcn2kCardShutDownTrap NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rc2kCardShutDownReason }
|
|
STATUS current
|
|
DESCRIPTION "A rcn2kCardShutDown trap signifies card shutting down
|
|
reason."
|
|
::= { rcTrapsMib 298 }
|
|
|
|
rcn2kCardOverheat NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType }
|
|
STATUS current
|
|
DESCRIPTION "A rcn2kCardOverheat trap indicates that the card temperature
|
|
has exceeded the alarm threshold temperature. This trap will
|
|
be followed by the rcn2kCardZoneOverheat trap that specifies
|
|
which zone's temperature has crossed the alarm threshold.
|
|
This trap is created in VSP9K 4.0 release and is intended
|
|
to replace the existing rcnCardOverheat."
|
|
::= { rcTrapsMib 300 }
|
|
|
|
rcn2kCardZoneOverheat NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rc2kCardZoneTemperature, rc2kCardTemperatureZoneInfo }
|
|
STATUS current
|
|
DESCRIPTION "A rcn2kCardZoneOverheat trap indicates which zone on the card
|
|
has exceeded the alarm threshold temperature."
|
|
::= { rcTrapsMib 301 }
|
|
|
|
rcn2kCardZoneNormalTemp NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rc2kCardZoneTemperature, rc2kCardTemperatureZoneInfo }
|
|
STATUS current
|
|
DESCRIPTION "A rcn2kCardZoneNormalTemp trap indicates that a zone
|
|
temperature on the card has cooled down from a previously
|
|
detected overheat condition."
|
|
::= { rcTrapsMib 302 }
|
|
|
|
rcn2kCardNormalTemp NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType }
|
|
STATUS current
|
|
DESCRIPTION "A rcn2kCardNormalTemp trap indicates that the card
|
|
temperature has cooled down from a previously detected
|
|
overheat condition. This trap is generated only after the
|
|
temperature on all the zones on the card have dropped below
|
|
the alarm thresholds.
|
|
This trap is created in VSP9K 4.0 release and is intended
|
|
to replace the existing rcnCardNormalTemp."
|
|
::= { rcTrapsMib 303 }
|
|
|
|
rcn2kCardOverheatShutDown NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcSlotType, rc2kCardZoneTemperature, rc2kCardTemperatureZoneInfo }
|
|
STATUS current
|
|
DESCRIPTION "A rcn2kCardOverheatShutDown trap indicates that a card
|
|
has been shut down because the temperature has exceeded
|
|
the shut down threshold temperature.
|
|
This trap is created in VSP9K 4.0 release and is intended
|
|
to replace the existing rcnCardOverheatShutDown."
|
|
::= { rcTrapsMib 304 }
|
|
|
|
rcnIsisSpbmSmltVirtBmacMisconfigTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisSmltVirtBmacMisconfigNodeSysId,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisSmltVirtBmacMisconfigNodeHostName,
|
|
rcIsisTrapIndicator}
|
|
STATUS current
|
|
DESCRIPTION "A SPBM ISIS trap signifies that SMLT virtual BMAC has been used by nodes other
|
|
than the SMLT boxes as system-id or MAC."
|
|
::= { rcTrapsMib 305 }
|
|
|
|
rcnPortChannelizedStateChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,rcChannelizedPortAdminMode}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A rcnPortChannelizedStateChangeTrap trap signifies that a port
|
|
channelized state has changed by enabling/disabling from admin."
|
|
::= { rcTrapsMib 306 }
|
|
|
|
rcnDNSv6RequestResponseTrap NOTIFICATION-TYPE
|
|
OBJECTS {rcSysDnsServerIpv6Addr, rcSysDnsRequestType }
|
|
STATUS current
|
|
DESCRIPTION "A rcDnsv6RequestResponseTrap trap signifies that the
|
|
switch had sent a query to the DNS server or it had
|
|
received a successful response from the DNS Server"
|
|
::= { rcTrapsMib 307 }
|
|
rcnMldNewGroupMemberTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMldNewGroupIfIndex,
|
|
rcMldNotificationNewGroupIpv6Address,
|
|
rcMldNotificationNewGroupInPort,
|
|
rcMldNotificationNewGroupMembers }
|
|
STATUS current
|
|
DESCRIPTION "An MldNewGroupMember trap signifies that a
|
|
new member has come on an interface."
|
|
::= { rcTrapsMib 308 }
|
|
|
|
rcnMldLossGroupMemberTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMldNotificationNewGroupMembers,
|
|
rcMldNotificationNewGroupIpv6Address,
|
|
rcMldNotificationNewGroupInPort,
|
|
rcMldNewGroupIfIndex }
|
|
STATUS current
|
|
DESCRIPTION "An MldLossGroupMember trap signifies that a
|
|
group member has been lost on an interface."
|
|
::= { rcTrapsMib 309 }
|
|
|
|
rcnMldNewQuerierTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMldNotificationInterfaceIfIndex,
|
|
mldInterfaceQuerier }
|
|
STATUS current
|
|
DESCRIPTION "An mldNewQuerier trap signifies that a new
|
|
querier has come up on an interface."
|
|
::= { rcTrapsMib 310 }
|
|
|
|
rcnMldQuerierChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMldNotificationInterfaceIfIndex,
|
|
rcMldInterfaceExtnNewQuerier,
|
|
mldInterfaceQuerier }
|
|
STATUS current
|
|
DESCRIPTION "An rcMldQuerierChange trap signifies that
|
|
the querier has changed."
|
|
::= { rcTrapsMib 311 }
|
|
|
|
rcnIsisPlsbGlobalDuplicateSysidTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisLocalSysId,
|
|
rcIsisLocalHostName,
|
|
rcIsisLocalChassisMac,
|
|
rcIsisRemoteHostName,
|
|
rcIsisRemoteChassisMac,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that a remote node is detected with same system-id as the local node. ISIS disabled globally."
|
|
::= { rcTrapsMib 312 }
|
|
|
|
rcnMRouteIpv6IngressThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS { rcMRouteIpv6IngressRecInUse,
|
|
rcMRouteIpv6IngressThreshold }
|
|
STATUS current
|
|
DESCRIPTION "This notification is generated when the number of
|
|
mroute6 ingress records exceeds the ingress threshold."
|
|
::= { rcTrapsMib 313 }
|
|
|
|
rcnMRouteIpv6EgressThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS { rcMRouteIpv6EgressRecInUse,
|
|
rcMRouteIpv6EgressThreshold }
|
|
STATUS current
|
|
DESCRIPTION "This notification is generated when the number of
|
|
mroute6 egress records exceeds the egress threshold."
|
|
::= { rcTrapsMib 314 }
|
|
|
|
|
|
rcnIsisPlsbLocalDuplicateNnameTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisLocalNickname,
|
|
rcIsisLocalSysId,
|
|
rcIsisPreviousSysId,
|
|
rcIsisLocalHostName,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that our old incarnation of the LSP with different Sys-Id with the same nickname has not timed out yet. ISIS disabled globally."
|
|
::= { rcTrapsMib 315 }
|
|
|
|
rcnIsisPlsbGlobalDuplicateNnameTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisLocalNickname,
|
|
rcIsisLocalHostName,
|
|
rcIsisLocalChassisMac,
|
|
rcIsisRemoteHostName,
|
|
rcIsisRemoteChassisMac,
|
|
rcIsisPlsbTrapType,
|
|
rcIsisTrapIndicator}
|
|
STATUS current
|
|
DESCRIPTION "A PLSB ISIS trap signifies that a remote node is detected with same nickname as the local node. ISIS disabled globally."
|
|
::= { rcTrapsMib 316 }
|
|
|
|
rcnPlugModInsertedInNotRecommendedPortTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
rcPluggableModuleDescription
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A rcnPlugModInsertedInNotRecommendedPortTrap signifies that the LR4 QSFP+
|
|
is inserted in to a not recommended port. It set alaem which will be cleared
|
|
by rcnPlugModRemovedFromRecommendedPortTrap"
|
|
::= { rcTrapsMib 317 }
|
|
|
|
rcnPlugModRemovedFromNotRecommendedPortTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcnPlugModRemovedFromNotRecommendedPortTrap signifies that the LR4 QSFP+
|
|
is removed from a not recommened port. It clears the alarm which is set
|
|
by rcnPlugModInsertedInNotRecommendedPortTrap"
|
|
::= { rcTrapsMib 318 }
|
|
|
|
|
|
rcnBpduGuardPortShutdown NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcPortBpduGuardTimeout }
|
|
STATUS current
|
|
DESCRIPTION "This notification will be generated when a port,
|
|
which has BPDU guard enabled, is shutdown. It is cleared
|
|
by rcnBpduGuardPortShutdownTimerExpired"
|
|
::= { rcTrapsMib 319 }
|
|
|
|
rcnBpduGuardPortShutdownTimerExpired NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex}
|
|
STATUS current
|
|
DESCRIPTION "This notification will be generated when a port,
|
|
which has BPDU guard enabled and is under shutdown timer,
|
|
and the timer expires. It clears the alarm rcnBpduGuardPortShutdown"
|
|
::= { rcTrapsMib 320 }
|
|
|
|
rcnIpv6FhsSnoopTableFullTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
rcIpv6FhsSnoopNotificationEntryType,
|
|
rcIpv6FhsSnoopNotificationEntryCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This trap is generated whenever static or dynamic binding entry count
|
|
has reached their max number. rcDhcpv6SnoopingNotificationBindingEntryType
|
|
indicates the type of entries reached the max number"
|
|
::= { rcTrapsMib 321 }
|
|
|
|
rcnLicenseWillExpire NOTIFICATION-TYPE
|
|
OBJECTS {rcLicenseFileName, rcLicenseDaysLeftBeforeExpiration}
|
|
STATUS current
|
|
DESCRIPTION "This notification signifies the time remaining before
|
|
Time Based License expires in days."
|
|
::= { rcTrapsMib 323 }
|
|
|
|
rcnLicenseExpired NOTIFICATION-TYPE
|
|
OBJECTS {rcLicenseFileName,rcLicenseDaysAfterExpiration}
|
|
STATUS current
|
|
DESCRIPTION "A rcnLicenseTrialPeriodExpired signifies that
|
|
has expired in days."
|
|
::= { rcTrapsMib 324 }
|
|
|
|
|
|
rcnMsdpMaxSACacheWarnSetTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpSACacheType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries in the cache database
|
|
exceeds 85 % of maximum value (6K) in local cache or in foreign cache."
|
|
::= {rcTrapsMib 325}
|
|
|
|
rcnMsdpMaxSACacheWarnClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpSACacheType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the Sa entries in the cache database
|
|
drops to 80 % of the maximum value (6K)."
|
|
::= {rcTrapsMib 326}
|
|
|
|
rcnMsdpMaxSACacheErrorSetTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpSACacheType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries in the cache database
|
|
hits 100 % of the maximum value (6K)."
|
|
::= {rcTrapsMib 327}
|
|
|
|
rcnMsdpMaxSACacheErrorClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpSACacheType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries in the cache database
|
|
drops to 95% of the maximum value."
|
|
::= {rcTrapsMib 328}
|
|
|
|
rcnMsdpMaxPeerSACacheWarnSetTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpPeerSALimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries for this peer exceeds
|
|
85 % of maximum value configured for this peer."
|
|
::= {rcTrapsMib 329}
|
|
|
|
rcnMsdpMaxPeerSACacheWarnClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpPeerSALimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries for this peer drops to
|
|
80 % of the maximum value configured for this peer."
|
|
::= {rcTrapsMib 330}
|
|
|
|
rcnMsdpMaxPeerSACacheErrorSetTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpPeerSALimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries for this peer hits 100 %
|
|
of the peer SA limit."
|
|
::= {rcTrapsMib 331}
|
|
|
|
rcnMsdpMaxPeerSACacheErrorClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpPeerSALimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries for this peer drops to 95%
|
|
of the peer SA limit."
|
|
::= {rcTrapsMib 332}
|
|
|
|
rcnMsdpEstablishedTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
msdpPeerFsmEstablishedTransitions
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The MSDP Established event is generated when the MSDP FSM
|
|
enters the ESTABLISHED state."
|
|
::= { rcTrapsMib 333 }
|
|
|
|
rcnMsdpBackwardTransitionTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
msdpPeerState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The MSDPBackwardTransition Event is generated when the
|
|
MSDP FSM moves from a higher-numbered state to a
|
|
lower-numbered state."
|
|
::= { rcTrapsMib 334 }
|
|
|
|
rcnSystemUsbInternalAccessErrorTrap NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "This trap is generated whenever system usb encounters an internal ccess errors "
|
|
::= { rcTrapsMib 335 }
|
|
|
|
|
|
rcnDigitalCertStatusTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcDigitalCertStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcDigitalCertStatusTrap signifies the status of
|
|
Subject Certificate has changed"
|
|
::= { rcTrapsMib 336 }
|
|
|
|
|
|
rcnDvrVistPeerDomainMismatchErrorTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisPeerVirtualBmac }
|
|
STATUS current
|
|
DESCRIPTION "This trap is generated whenever V-IST link comes up between two DVR peers
|
|
that are in different DVR domains"
|
|
::= { rcTrapsMib 341 }
|
|
|
|
rcnDvrVistPeerDomainMismatchErrorClearTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcIsisPeerVirtualBmac }
|
|
STATUS current
|
|
DESCRIPTION "This trap is generated whenever the erroneous condition of having a V-IST link
|
|
up between two DVR peers from different DVR domains is cleared"
|
|
::= { rcTrapsMib 342 }
|
|
|
|
-- Notifications objects
|
|
|
|
rcRadiusNotifications OBJECT IDENTIFIER ::= { rcRadius 8 }
|
|
rcRadiusNotificationObjects OBJECT IDENTIFIER ::= { rcRadiusNotifications 1 }
|
|
|
|
rcRadiusEapRAVErrorMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address that was authorized on a port which could not be
|
|
moved to the Radius-Assigned VLAN."
|
|
::= { rcRadiusNotificationObjects 1 }
|
|
|
|
rcRadiusEapRAVErrorPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the port that could not be moved to the Radius-Assigned
|
|
VLAN."
|
|
::= { rcRadiusNotificationObjects 2 }
|
|
|
|
rcnRadiusEapRAVError NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
rcRadiusEapRAVErrorMacAddress,
|
|
rcRadiusEapRAVErrorPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates that an Eap/Neap client MAC address was
|
|
authorized on a port, but the port could not be moved to the
|
|
Radius-Assigned VLAN."
|
|
::= { rcTrapsMib 344 }
|
|
|
|
rcRadiusEapServAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Address type of a EAP Radius server. To be used with rcRadiusEapServAddress."
|
|
::= { rcRadiusNotificationObjects 3 }
|
|
|
|
rcRadiusEapServAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Address of a EAP Radius server. To be used with rcRadiusEapServAddressType."
|
|
::= { rcRadiusNotificationObjects 4 }
|
|
|
|
rcnRadiusEapServersDown NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when all EAP Radius servers become unreachable."
|
|
::= { rcTrapsMib 345 }
|
|
|
|
rcnRadiusEapServerUp NOTIFICATION-TYPE
|
|
OBJECTS { rcRadiusEapServAddressType,
|
|
rcRadiusEapServAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when at least one EAP Radius server becomes reachable."
|
|
::= { rcTrapsMib 346 }
|
|
|
|
--
|
|
-- IMPORTANT NOTE: The following section contains older definitions of
|
|
-- notifications that do not follow the standard format
|
|
-- for OIDs for notifications. New notifications should
|
|
-- *NOT* be added to this section. Instead, they should
|
|
-- be added above, under the snmpTrapsMib branch.
|
|
--
|
|
|
|
rcCardDown NOTIFICATION-TYPE
|
|
OBJECTS { rcCardIndex, rcCardAdminStatus, rcCardOperStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardDown trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the down state."
|
|
::= { rcTraps 1 }
|
|
|
|
rcCardUp NOTIFICATION-TYPE
|
|
OBJECTS { rcCardIndex, rcCardAdminStatus, rcCardOperStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardUp trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the up state."
|
|
::= { rcTraps 2 }
|
|
|
|
rcErrorNotification NOTIFICATION-TYPE
|
|
OBJECTS { rcErrorLevel, rcErrorCode, rcErrorText }
|
|
STATUS current
|
|
DESCRIPTION "A rcErrorNotification trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that an error condition has occured."
|
|
::= { rcTraps 3 }
|
|
|
|
rcStpNewRoot NOTIFICATION-TYPE
|
|
OBJECTS { rcStgId }
|
|
STATUS current
|
|
DESCRIPTION "A rcStpNewRoot trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Spanning Tree Protocol has declared
|
|
the device to be the new root of the spanning
|
|
tree."
|
|
::= { rcTraps 4 }
|
|
|
|
rcStpTopologyChange NOTIFICATION-TYPE
|
|
OBJECTS { rcStgId, rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcStpTopologyChange trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Spanning Tree Protocol has gone due
|
|
a topology change event."
|
|
::= { rcTraps 5 }
|
|
|
|
rcChasPowerSupplyDown NOTIFICATION-TYPE
|
|
OBJECTS { rcChasPowerSupplyId, rcChasPowerSupplyOperStatus}
|
|
STATUS current
|
|
DESCRIPTION "A rcChasPowerSupplyDown trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the rcChasPowerSupplyOperStatus
|
|
object for one of its power supply unit is
|
|
about to transition into the down state."
|
|
::= { rcTraps 6 }
|
|
|
|
rcChasFanDown NOTIFICATION-TYPE
|
|
OBJECTS { rcChasFanId, rcChasFanOperStatus}
|
|
STATUS current
|
|
DESCRIPTION "A rcChasFanDown trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the rcChasFanOperStatus object
|
|
for one of its power supply unit is about to
|
|
transition into the down state."
|
|
::= { rcTraps 7 }
|
|
|
|
rcLinkOscillation NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcLinkOscillation trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected an excessive number of link state
|
|
transitions on the specified port."
|
|
::= { rcTraps 8 }
|
|
|
|
rcMacViolation NOTIFICATION-TYPE
|
|
OBJECTS { rcErrorText, rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcMacViolation trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
received a PDU with an invalid source MAC
|
|
address."
|
|
::= { rcTraps 9 }
|
|
|
|
rcSonetTrap NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex, rcPosSonetTrapType, rcPosSonetTrapIndication }
|
|
STATUS current
|
|
DESCRIPTION "A rcSonetTrap trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected a change of status on a Sonet port."
|
|
::= { rcTraps 10 }
|
|
|
|
rc2kCardDown NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex,
|
|
rc2kCardFrontAdminStatus,
|
|
rc2kCardFrontOperStatus }
|
|
STATUS obsolete
|
|
DESCRIPTION "A rcCardDown trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the down state."
|
|
::= { rcTraps 11 }
|
|
|
|
rc2kCardUp NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex,
|
|
rc2kCardFrontAdminStatus,
|
|
rc2kCardFrontOperStatus }
|
|
STATUS obsolete
|
|
DESCRIPTION "A rcCardUp trap signifies that the SNMPv2 entity,
|
|
acting in an agent role, has detected that the
|
|
rcCardOperStatus object for one of its cards
|
|
is about to transition into the up state."
|
|
::= { rcTraps 12 }
|
|
|
|
rc2kTemperature NOTIFICATION-TYPE
|
|
OBJECTS { rc2kChassisTemperature }
|
|
STATUS current
|
|
DESCRIPTION "A rc2kTemperature trap signifies that the SNMPv2
|
|
entity, acting in an agent role, has detected the
|
|
chassis is over-heating."
|
|
::= { rcTraps 13 }
|
|
|
|
rcChasPowerSupplyUp NOTIFICATION-TYPE
|
|
OBJECTS { rcChasPowerSupplyId, rcChasPowerSupplyOperStatus}
|
|
STATUS current
|
|
DESCRIPTION "A rcChasPowerSupplyUp trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the rcChasPowerSupplyOperStatus
|
|
object for one of its power supply unit is
|
|
about to transition into the up state."
|
|
::= { rcTraps 14 }
|
|
|
|
rc2kAtmPvcLinkStateChange NOTIFICATION-TYPE
|
|
OBJECTS { rc2kAtmPvcIfIndex,
|
|
rc2kAtmPvcVpi,
|
|
rc2kAtmPvcVci,
|
|
rc2kAtmPvcOamVcStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rc2kAtmPvcLinkStateChange trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has detected
|
|
that the rc2kAtmPvcOamVcStatus object for one of PVC is
|
|
about to transition into different state, either from
|
|
up to down or from down to up."
|
|
::= { rcTraps 15 }
|
|
|
|
rcStpTCN NOTIFICATION-TYPE
|
|
OBJECTS { rcStgId, rcPortIndex, rcStgBridgeAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcStpTopologyChange trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected the Spanning Tree Protocol has gone due
|
|
a topology change event."
|
|
::= { rcTraps 16 }
|
|
|
|
rcSmltIstLinkUp NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcSmltIstLinkUp trap signifies that the split
|
|
MLT link is from down to up."
|
|
::= { rcTraps 17 }
|
|
|
|
rcSmltIstLinkDown NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcSmltIstLinkDown trap signifies that the
|
|
split MLT link is from up to down."
|
|
::= { rcTraps 18 }
|
|
|
|
rcSmltLinkUp NOTIFICATION-TYPE
|
|
OBJECTS { rcMltSmltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcMltSmltId trap signifies that the split
|
|
SMLT link is up."
|
|
::= { rcTraps 19 }
|
|
|
|
rcSmltLinkDown NOTIFICATION-TYPE
|
|
OBJECTS { rcMltSmltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcMltSmltId trap signifies that the split
|
|
SMLT link is down."
|
|
::= { rcTraps 20 }
|
|
|
|
rcChasFanUp NOTIFICATION-TYPE
|
|
OBJECTS { rcChasFanId, rcChasFanOperStatus}
|
|
STATUS current
|
|
DESCRIPTION "A rcChasFanUp trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the rcChasFanOperStatus object
|
|
for one of its power supply unit is about to
|
|
transition into the up state."
|
|
::= { rcTraps 21 }
|
|
|
|
rcPasswordChange NOTIFICATION-TYPE
|
|
OBJECTS { rcCliPasswordChange, rcCliPassChangeResult}
|
|
STATUS current
|
|
DESCRIPTION "A rcPasswordChange trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the one of the cli password is
|
|
changed."
|
|
::= { rcTraps 22 }
|
|
|
|
rcEmError NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcChasEmModeError}
|
|
STATUS current
|
|
DESCRIPTION "A rcEmError trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected Em error."
|
|
::= { rcTraps 23 }
|
|
|
|
rcPcmciaCardRemoved NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcPcmciaRemoved trap signifies that the
|
|
SNMPv2 entity, acting in an agent role, has
|
|
detected that the PCMCIA card is being removed."
|
|
::= { rcTraps 25 }
|
|
|
|
rcSmartCpldTimerFired NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcSmartCpldTimerFired trap signifies that the
|
|
cpld timer fired."
|
|
::= { rcTraps 26 }
|
|
|
|
rcCardCpldNotUpDate NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcCardCpldNotUpDate trap signifies that the
|
|
cpld is not up to date."
|
|
::= { rcTraps 27 }
|
|
|
|
rcIgapLogFileFull NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "A rcIgapLogFileFull trap signifies that the
|
|
Igap accounting time-out Log File reach the
|
|
maximum."
|
|
::= { rcTraps 28 }
|
|
|
|
rcCpLimitShutDown NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,
|
|
ifAdminStatus,
|
|
ifOperStatus,
|
|
rcPortCpLimitShutDown }
|
|
STATUS current
|
|
DESCRIPTION "A rcCpLimitShutDown trap signifies that the
|
|
cp limit for the port is shutting down."
|
|
::= { rcTraps 29 }
|
|
|
|
rcSshServerEnabled NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalPort }
|
|
STATUS current
|
|
DESCRIPTION "A rcSshServerEnabled trap signifies that the
|
|
SSH server is enabled."
|
|
::= { rcTraps 30 }
|
|
|
|
rcSshServerDisabled NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalPort }
|
|
STATUS current
|
|
DESCRIPTION "A rcSshServerDisabled trap signifies that the
|
|
SSH server is disabled."
|
|
::= { rcTraps 31 }
|
|
|
|
rcSshSessionLogin NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalHostIpAddr }
|
|
STATUS current
|
|
DESCRIPTION "A rcSshSessionLogin trap signifies that there
|
|
is a SSH session login."
|
|
::= { rcTraps 32 }
|
|
|
|
rcSshSessionLogout NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalHostIpAddr }
|
|
STATUS current
|
|
DESCRIPTION "A rcSshSessionLogout trap signifies that there
|
|
is a SSH session logout."
|
|
::= { rcTraps 33 }
|
|
|
|
rcSshUnauthorizedAccess NOTIFICATION-TYPE
|
|
OBJECTS { rcSshGlobalHostIpAddr }
|
|
STATUS current
|
|
DESCRIPTION "A rcSshUnauthorizedAccess trap signifies that
|
|
an unauthorized access has occured."
|
|
::= { rcTraps 34 }
|
|
|
|
rcHaCpuState NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex, rcL2RedundancyHaCpuState }
|
|
STATUS current
|
|
DESCRIPTION "A rcHaCpuState trap signifies that the
|
|
state of the HA-CPU."
|
|
::= { rcTraps 35 }
|
|
|
|
rcInsufficientMemory NOTIFICATION-TYPE
|
|
OBJECTS { rc2kCardIndex}
|
|
STATUS current
|
|
DESCRIPTION "A rcInsufficientMemory trap indicates insufficient memory on
|
|
CPU blade for proper operation. Recommended memory = 256 MB
|
|
available through Nortel Networks upgrade kit"
|
|
::= { rcTraps 36 }
|
|
|
|
rcSaveConfigAction NOTIFICATION-TYPE
|
|
OBJECTS { rcSysAction }
|
|
STATUS current
|
|
DESCRIPTION "A rcSaveConfigAction trap indicates the switch run
|
|
time or boot configuration is being saved"
|
|
::= { rcTraps 37 }
|
|
|
|
rcLoopDetectOnPort NOTIFICATION-TYPE
|
|
OBJECTS { rcVlanId, rcPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcSaveConfigAction trap indicates that a loop has
|
|
been detected on a port. The vlan on that port will
|
|
be disabled."
|
|
::= { rcTraps 38 }
|
|
|
|
rcbgpEstablished NOTIFICATION-TYPE
|
|
OBJECTS { rcIpBgpPeerIpAddress, rcIpBgpPeerLastError, rcIpBgpPeerState }
|
|
STATUS current
|
|
DESCRIPTION "The BGP Established event is generated when
|
|
the BGP FSM enters the ESTABLISHED state."
|
|
::= { rcTraps 39 }
|
|
|
|
rcbgpBackwardTransition NOTIFICATION-TYPE
|
|
OBJECTS { rcIpBgpPeerIpAddress, rcIpBgpPeerLastError, rcIpBgpPeerState }
|
|
STATUS current
|
|
DESCRIPTION "The BGPBackwardTransition Event is generated
|
|
when the BGP FSM moves from a higher numbered
|
|
state to a lower numbered state."
|
|
::= { rcTraps 40 }
|
|
|
|
rcAggLinkUp NOTIFICATION-TYPE
|
|
OBJECTS { rcMltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcAggLinkUp trap is generated when the operational
|
|
state of the aggregator changes from down to up."
|
|
::= { rcTraps 41 }
|
|
|
|
rcAggLinkDown NOTIFICATION-TYPE
|
|
OBJECTS { rcMltId }
|
|
STATUS current
|
|
DESCRIPTION "A rcAggLinkDown trap is generated when the operational
|
|
state of the aggregator changes from up to down."
|
|
::= { rcTraps 42 }
|
|
|
|
rcIgmpNewGroupMember NOTIFICATION-TYPE
|
|
OBJECTS { rcIgmpGroupIfIndex, rcIgmpGroupIpAddress, rcIgmpGroupInPort,
|
|
rcIgmpGroupMembers }
|
|
STATUS current
|
|
DESCRIPTION "An IgmpNewGroupMember trap signifies that a
|
|
new member has come on an interface."
|
|
::= { rcTraps 43 }
|
|
|
|
rcIgmpLossGroupMember NOTIFICATION-TYPE
|
|
OBJECTS { rcIgmpGroupMembers, rcIgmpGroupIpAddress, rcIgmpGroupInPort,
|
|
rcIgmpGroupIfIndex }
|
|
STATUS current
|
|
DESCRIPTION "An IgmpLossGroupMember trap signifies that a
|
|
group member has been lost on an interface."
|
|
::= { rcTraps 44 }
|
|
|
|
rcIgmpNewQuerier NOTIFICATION-TYPE
|
|
-- cannot include igmpInterfaceIfIndex in the OBJECTS clause because it
|
|
-- is not-accessible
|
|
-- OBJECTS { igmpInterfaceIfIndex, igmpInterfaceQuerier }
|
|
STATUS obsolete
|
|
DESCRIPTION "An igmpNewQuerier trap signifies that a new
|
|
querier has come up on an interface."
|
|
::= { rcTraps 45 }
|
|
|
|
rcIgmpQuerierChange NOTIFICATION-TYPE
|
|
-- cannot include igmpInterfaceIfIndex in the OBJECTS clause because it
|
|
-- is not-accessible
|
|
-- OBJECTS { igmpInterfaceIfIndex,
|
|
-- rcIgmpInterfaceExtnNewQuerier,
|
|
-- igmpInterfaceQuerier }
|
|
STATUS obsolete
|
|
DESCRIPTION "An rcIgmpQuerierChange trap signifies that
|
|
the querier has changed."
|
|
::= { rcTraps 46 }
|
|
|
|
rcDvmrpIfStateChange NOTIFICATION-TYPE
|
|
-- Cannot use these, as they are either not-accessible, or no longer exist
|
|
-- in the current draft of the DVMRP-STD-MIB
|
|
-- OBJECTS { dvmrpInterfaceIfIndex, dvmrpInterfaceOperState }
|
|
STATUS current
|
|
DESCRIPTION "A rcDvmrpIfStateChange trap signifies that there
|
|
has been a change in the state of a DVMRP
|
|
interface."
|
|
::= { rcTraps 47 }
|
|
|
|
rcDvmrpNewNbrChange NOTIFICATION-TYPE
|
|
-- Cannot use these, as they are either not-accessible, or no longer exist
|
|
-- in the current draft of the DVMRP-STD-MIB
|
|
-- OBJECTS { dvmrpNeighborIfIndex, dvmrpNeighborAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcDvmrpNewNbrChange trap signifies that a new
|
|
neighbor has come up on a DVMRP interface."
|
|
::= { rcTraps 48 }
|
|
|
|
rcDvmrpNbrLossChange NOTIFICATION-TYPE
|
|
-- Cannot use these, as they are either not-accessible, or no longer exist
|
|
-- in the current draft of the DVMRP-STD-MIB
|
|
-- OBJECTS { dvmrpNeighborIfIndex, dvmrpNeighborAddress }
|
|
STATUS current
|
|
DESCRIPTION "A rcDvmrpNbrLossChange trap signifies that a new
|
|
neighbor has gone down on a DVMRP interface."
|
|
::= { rcTraps 49 }
|
|
|
|
rcPsePortOnOff NOTIFICATION-TYPE
|
|
OBJECTS { rcPortPoePseIndexGroupIndex,
|
|
rcPortPoePseIndexPortIndex,
|
|
pethPsePortDetectionStatus }
|
|
STATUS current
|
|
DESCRIPTION "A rcPsePortOnOff trap signifies that if Pse Port is delivering or not power to the
|
|
This Notification SHOULD be sent on every status change except in the searching mode."
|
|
::= { rcTraps 50 }
|
|
|
|
rcPsePortPowerMaintenanceStatus NOTIFICATION-TYPE
|
|
-- pethPsePortPowerMaintenanceStatus no longer exists, cannot use it here
|
|
-- OBJECTS { rcPortPoePseIndexGroupIndex,
|
|
-- rcPortPoePseIndexPortIndex,
|
|
-- pethPsePortPowerMaintenanceStatus }
|
|
OBJECTS { rcPortPoePseIndexGroupIndex,
|
|
rcPortPoePseIndexPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcPsePortPowerMaintenanceStatus trap signifies that a Port change Status
|
|
and it SHOULD be sent on every status change."
|
|
::= { rcTraps 51 }
|
|
|
|
rcMainPseBackupActivate NOTIFICATION-TYPE
|
|
-- pethMainPseBackupActivated no longer exists, cannot use it here
|
|
-- OBJECTS { rcPortPoePseIndexGroupIndex,
|
|
-- rcPortPoePseIndexPortIndex,
|
|
-- pethMainPseBackupActivated }
|
|
OBJECTS { rcPortPoePseIndexGroupIndex,
|
|
rcPortPoePseIndexPortIndex }
|
|
STATUS current
|
|
DESCRIPTION "A rcMainPseBackupActivate trap signifies that
|
|
a Backup is Activated or BackUp is released on a Pse Port Group."
|
|
::= { rcTraps 52 }
|
|
|
|
rcMainPowerUsageOn NOTIFICATION-TYPE
|
|
OBJECTS { rcPortPoePseIndexGroupIndex, pethMainPseConsumptionPower }
|
|
STATUS current
|
|
DESCRIPTION "A rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication
|
|
of a PSE Port Group is on, the usage power is above the threshold."
|
|
::= { rcTraps 53 }
|
|
|
|
rcMainPowerUsageOff NOTIFICATION-TYPE
|
|
OBJECTS { rcPortPoePseIndexGroupIndex, pethMainPseConsumptionPower }
|
|
STATUS current
|
|
DESCRIPTION "A rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication
|
|
of a PSE Port Group is off, the usage power is above the threshold."
|
|
::= { rcTraps 54 }
|
|
|
|
rcPseCardOnOff NOTIFICATION-TYPE
|
|
OBJECTS { rcPortPoeMainPseExtnPwrAdmin }
|
|
STATUS current
|
|
DESCRIPTION "A rcPoeMainPwrFailure trap signifies that the main power admin status is up."
|
|
::= { rcTraps 55 }
|
|
|
|
rcIgmpNewQuerierOnIf NOTIFICATION-TYPE
|
|
OBJECTS { rcIgmpInterfaceIfIndex, rcIgmpInterfaceQuerier }
|
|
STATUS current
|
|
DESCRIPTION "An igmpNewQuerier trap signifies that a new
|
|
querier has come up on an interface."
|
|
::= { rcTraps 121 }
|
|
|
|
rcIgmpQuerierChanged NOTIFICATION-TYPE
|
|
OBJECTS { rcIgmpInterfaceIfIndex,
|
|
rcIgmpInterfaceExtnNewQuerier,
|
|
rcIgmpInterfaceQuerier }
|
|
STATUS current
|
|
DESCRIPTION "An rcIgmpQuerierChange trap signifies that
|
|
the querier has changed."
|
|
::= { rcTraps 122 }
|
|
|
|
rcDuplexMismatch NOTIFICATION-TYPE
|
|
OBJECTS { rcPortIndex,lldpRemPortIdSubtype,lldpRemPortId }
|
|
STATUS current
|
|
DESCRIPTION "A rcDuplexMismatch trap signifies that
|
|
a LLDP Neighbor Port's Duplex/Speed mismatches
|
|
with local port"
|
|
::= { rcTraps 123 }
|
|
|
|
-- Syslog Group
|
|
|
|
rcSyslogGlobal OBJECT IDENTIFIER ::= { rcSyslog 1 }
|
|
|
|
rcSyslogGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable the SysLog feature. When
|
|
enabled this feature will send a message to a server
|
|
on a network that this configured to receive and
|
|
store diagnostic messages from this device. The
|
|
type of messages sent is user configurable."
|
|
DEFVAL { true }
|
|
::= { rcSyslogGlobal 1 }
|
|
|
|
rcSyslogGlobalMaxHosts OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximun number of remote hosts considered 'active'
|
|
and able to receive messages from the Syslog service
|
|
on the router."
|
|
DEFVAL { 5 }
|
|
::= { rcSyslogGlobal 2 }
|
|
|
|
rcSyslogGlobalOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
inactive(2),
|
|
emptyHostTbl(3),
|
|
allHostDisabled(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operational state of the syslog service
|
|
on the router."
|
|
DEFVAL { active }
|
|
::= { rcSyslogGlobal 3 }
|
|
|
|
rcSyslogGlobalHeader OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(1),
|
|
managementVIP(2),
|
|
circuitlessIP(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP Header Type for the Syslog Packet."
|
|
DEFVAL { 1 }
|
|
::= { rcSyslogGlobal 4 }
|
|
|
|
rcSyslogHostTbl OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSyslogHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of remote host destinations for syslog."
|
|
::= { rcSyslog 2 }
|
|
|
|
rcSyslogHostEntry OBJECT-TYPE
|
|
SYNTAX RcSyslogHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information for a particular
|
|
entry in rcSyslogHostTable."
|
|
INDEX { rcSyslogHostId }
|
|
::= { rcSyslogHostTbl 1 }
|
|
|
|
RcSyslogHostEntry ::= SEQUENCE {
|
|
rcSyslogHostId INTEGER,
|
|
rcSyslogHostIpAddr IpAddress,
|
|
rcSyslogHostUdpPort INTEGER,
|
|
rcSyslogHostFacility INTEGER,
|
|
rcSyslogHostModuleId INTEGER,
|
|
rcSyslogHostModuleId2 Integer32,
|
|
rcSyslogHostSeverity INTEGER,
|
|
rcSyslogHostMapInfoSeverity INTEGER,
|
|
rcSyslogHostMapWarningSeverity INTEGER,
|
|
rcSyslogHostMapErrorSeverity INTEGER,
|
|
rcSyslogHostMapMfgSeverity INTEGER,
|
|
rcSyslogHostMapFatalSeverity INTEGER,
|
|
rcSyslogHostMapTraceMsg INTEGER,
|
|
rcSyslogHostMapTrapMsg INTEGER,
|
|
rcSyslogHostLogTraceMsgs TruthValue,
|
|
rcSyslogHostLogTrapMsgs TruthValue,
|
|
rcSyslogHostEnable TruthValue,
|
|
rcSyslogHostRowStatus RowStatus,
|
|
rcSyslogHostAddressType InetAddressType,
|
|
rcSyslogHostAddress InetAddress,
|
|
rcSyslogHostSecureForwardingEnable TruthValue,
|
|
rcSyslogHostSecureForwardingSshProtect TruthValue,
|
|
rcSyslogHostSecureForwardingTcpPort Integer32,
|
|
rcSyslogHostSecureForwardingMode INTEGER,
|
|
rcSyslogHostSecureForwardingServerCertName DisplayString
|
|
}
|
|
|
|
rcSyslogHostId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host Id."
|
|
::= { rcSyslogHostEntry 1 }
|
|
|
|
rcSyslogHostIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Host Ip Address"
|
|
::= { rcSyslogHostEntry 2 }
|
|
|
|
rcSyslogHostUdpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (514..530)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the UDP port to use to send syslog
|
|
messages to the host."
|
|
DEFVAL { 514 }
|
|
::= { rcSyslogHostEntry 3 }
|
|
|
|
rcSyslogHostFacility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local0(128),
|
|
local1(136),
|
|
local2(144),
|
|
local3(152),
|
|
local4(160),
|
|
local5(168),
|
|
local6(176),
|
|
local7(184)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the UNIX facility used in messages
|
|
to the syslog host. Default is LOCAL7."
|
|
DEFVAL { local7 }
|
|
::= { rcSyslogHostEntry 4 }
|
|
|
|
rcSyslogHostModuleId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
common (1), -- '00000001'H
|
|
snmp (2), -- '00000002'H
|
|
rmon (4), -- '00000004'H
|
|
portmgr (8), -- '00000008'H
|
|
chasmgr (16), -- '00000010'H
|
|
bridge (32), -- '00000020'H
|
|
ospf (64), -- '00000040'H
|
|
hwif (128), -- '00000080'H
|
|
sim (256), -- '00000100'H
|
|
cpp (512), -- '00000200'H
|
|
netdrv (1024), -- '00000400'H
|
|
vlanmgr (2048), -- '00000800'H
|
|
cli (4096), -- '00001000'H
|
|
main (8192), -- '00002000'H
|
|
p2ip (16384), -- '00004000'H
|
|
rcip (32768), -- '00008000'H
|
|
rompager (65536), -- '00010000'H
|
|
acif (131072), -- '00020000'H
|
|
gbip (262144), -- '00040000'H
|
|
wdt (524288), -- '00080000'H
|
|
tdp (1048576), -- '00100000'H
|
|
mandiag (2097152), -- '00200000'H
|
|
mantest (4194304), -- '00400000'H
|
|
igmp (8388608), -- '00800000'H
|
|
ipfil (16777216), -- '01000000'H
|
|
mlt (33554432), -- '02000000'H
|
|
ippolicy(67108864), -- '04000000'H
|
|
ipmc (134217728), -- '08000000'H
|
|
syslog (268435456) -- '10000000'H
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies for which modules/tasks syslog messages
|
|
should be sent. Default is all modules/tasks."
|
|
::= { rcSyslogHostEntry 5 }
|
|
|
|
rcSyslogHostModuleId2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies for which modules/tasks syslog messages
|
|
should be sent. Default is all modules/tasks."
|
|
::= { rcSyslogHostEntry 6 }
|
|
|
|
rcSyslogHostSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER (1..31)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the severity level for which syslog messages
|
|
should be sent for the modules specifies in
|
|
'SyslogHostModule'.
|
|
Value is one of multiple (logical 'OR') of the following:
|
|
info(1),
|
|
warning(2),
|
|
error(4),
|
|
mfg(8),
|
|
fatal(16)."
|
|
DEFVAL { 1 }
|
|
::= { rcSyslogHostEntry 7 }
|
|
|
|
-- Following between =begin =end is processed by mib_tools/extras.awk
|
|
-- =begin enum
|
|
-- rcSyslogHostSeverity info 1
|
|
-- rcSyslogHostSeverity warning 2
|
|
-- rcSyslogHostSeverity error 4
|
|
-- rcSyslogHostSeverity mfg 8
|
|
-- rcSyslogHostSeverity fatal 16
|
|
-- rcSyslogHostSeverity all 31
|
|
-- =end enum
|
|
|
|
rcSyslogHostMapInfoSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergency(1),
|
|
alert(2),
|
|
critical(3),
|
|
error(4),
|
|
warning(5),
|
|
notice(6),
|
|
info(7),
|
|
debug(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the syslog severity to use for Accelar
|
|
INFO messages. Default is INFO."
|
|
DEFVAL { info }
|
|
::= { rcSyslogHostEntry 8 }
|
|
|
|
rcSyslogHostMapWarningSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergency(1),
|
|
alert(2),
|
|
critical(3),
|
|
error(4),
|
|
warning(5),
|
|
notice(6),
|
|
info(7),
|
|
debug(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the syslog severity to use for Accelar
|
|
WARNING messages. Default is WARNING. Should be
|
|
<= INFO."
|
|
DEFVAL { warning }
|
|
::= { rcSyslogHostEntry 9 }
|
|
|
|
rcSyslogHostMapErrorSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergency(1),
|
|
alert(2),
|
|
critical(3),
|
|
error(4),
|
|
warning(5),
|
|
notice(6),
|
|
info(7),
|
|
debug(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the syslog severity to use for Accelar
|
|
ERROR messages. Default is ERROR. Should be
|
|
<= WARNING."
|
|
DEFVAL { error }
|
|
::= { rcSyslogHostEntry 10 }
|
|
|
|
rcSyslogHostMapMfgSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergency(1),
|
|
alert(2),
|
|
critical(3),
|
|
error(4),
|
|
warning(5),
|
|
notice(6),
|
|
info(7),
|
|
debug(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the syslog severity to use for Accelar
|
|
Manufactoring messages. Dafault is ERROR."
|
|
DEFVAL { error }
|
|
::= { rcSyslogHostEntry 11 }
|
|
|
|
rcSyslogHostMapFatalSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergency(1),
|
|
alert(2),
|
|
critical(3),
|
|
error(4),
|
|
warning(5),
|
|
notice(6),
|
|
info(7),
|
|
debug(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the syslog severity to use for Accelar
|
|
FATAL messages. Default is EMERGENCY. Should be
|
|
<= ERROR."
|
|
DEFVAL { emergency }
|
|
::= { rcSyslogHostEntry 12 }
|
|
|
|
rcSyslogHostMapTraceMsg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergency(1),
|
|
alert(2),
|
|
critical(3),
|
|
error(4),
|
|
warning(5),
|
|
notice(6),
|
|
info(7),
|
|
debug(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the syslog severity to use for syslog
|
|
trace messages. Default is DEBUG."
|
|
::= { rcSyslogHostEntry 13 }
|
|
|
|
rcSyslogHostMapTrapMsg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergency(1),
|
|
alert(2),
|
|
critical(3),
|
|
error(4),
|
|
warning(5),
|
|
notice(6),
|
|
info(7),
|
|
debug(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the UNIX severity code to use for syslog
|
|
messages for SNMP traps sent to the syslog host.
|
|
Default is INFO."
|
|
::= { rcSyslogHostEntry 14 }
|
|
|
|
rcSyslogHostLogTraceMsgs OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether to activate the host to log the
|
|
syslog trace messages."
|
|
::= { rcSyslogHostEntry 15 }
|
|
|
|
rcSyslogHostLogTrapMsgs OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether to activate the host to log the
|
|
syslog messages for SNMP traps."
|
|
::= { rcSyslogHostEntry 16 }
|
|
|
|
rcSyslogHostEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable messages to be sent to syslog host."
|
|
DEFVAL { false }
|
|
::= { rcSyslogHostEntry 17 }
|
|
|
|
rcSyslogHostRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcSyslogTable."
|
|
::= { rcSyslogHostEntry 18 }
|
|
|
|
rcSyslogHostAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Address Type of the Host."
|
|
::= {rcSyslogHostEntry 19 }
|
|
|
|
rcSyslogHostAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Address of the Host."
|
|
::= {rcSyslogHostEntry 20 }
|
|
|
|
rcSyslogHostSecureForwardingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Secure forwarding of Syslog for a particular host."
|
|
DEFVAL { true }
|
|
::= { rcSyslogHostEntry 21 }
|
|
|
|
rcSyslogHostSecureForwardingSshProtect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Secure forwarding of Syslog over SSH remote port forwarding for particular host."
|
|
DEFVAL { true }
|
|
::= { rcSyslogHostEntry 22 }
|
|
|
|
rcSyslogHostSecureForwardingTcpPort OBJECT-TYPE
|
|
SYNTAX Integer32(1025..49151)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the tcp port to use for Secure forwarding of for particular host."
|
|
DEFVAL { 1025 }
|
|
::= { rcSyslogHostEntry 23 }
|
|
|
|
rcSyslogHostSecureForwardingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
ssh (2),
|
|
tls (3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Secure forwarding of Syslog over remote port forwarding
|
|
for particular host.This object is used to obsolete the
|
|
rcSyslogHostSecureForwardingEnable and
|
|
rcSyslogHostSecureForwardingSshProtect.
|
|
|
|
none - Set Secure forwarding mode none for particular Syslog host
|
|
ssh - Set Secure forwarding mode for particular Syslog host over SSH tunnel
|
|
- SSH is no longer supported starting with release VOSS 6.1.0.0 for VSP4K and VSP8K
|
|
tls - Set Secure forwarding mode for particular Syslog host over "
|
|
|
|
DEFVAL { none }
|
|
::= { rcSyslogHostEntry 24 }
|
|
|
|
rcSyslogHostSecureForwardingServerCertName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies the identity name of server certificate. It is used
|
|
to match the subject name of the server certificate received during
|
|
negotiation with this configured server cert name to allow negotiation"
|
|
::= { rcSyslogHostEntry 25 }
|
|
|
|
|
|
-- logging msg control
|
|
rcLogMsgControl OBJECT IDENTIFIER ::= { rcSyslog 3 }
|
|
|
|
rcLogMsgControlAction OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
suppressMsg(1) ,
|
|
sendTrap(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " This value indicates the type of message control action"
|
|
DEFVAL { suppressMsg }
|
|
::= { rcLogMsgControl 1 }
|
|
|
|
|
|
rcLogMsgControlInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..30)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the message control interval value in minutes"
|
|
DEFVAL { 5 }
|
|
::= { rcLogMsgControl 2}
|
|
|
|
rcLogMsgControlMaxMsgNum OBJECT-TYPE
|
|
SYNTAX INTEGER (2..500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the maximum frequency/count
|
|
of the occurence of the Log Message."
|
|
DEFVAL { 5 }
|
|
::= { rcLogMsgControl 3 }
|
|
|
|
rcLogMsgControlEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the status of the system message control"
|
|
DEFVAL { false }
|
|
::={ rcLogMsgControl 4}
|
|
|
|
-- logging config
|
|
|
|
rcLogLoggingGlobal OBJECT IDENTIFIER ::= { rcSyslog 4 }
|
|
|
|
rcLogLoggingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the status of the logging operational status"
|
|
::={ rcLogLoggingGlobal 1}
|
|
|
|
rcLogLoggingLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
info(1),
|
|
warning(2),
|
|
error(3),
|
|
mfg(4),
|
|
fatal(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Use to set the logging msg level.
|
|
'info(1)' logs any message level 1 and above.
|
|
'warning(2)' logs any message level 2 and above.
|
|
'error(3)' logs any message level 3 and above.
|
|
'mfg(4)' logs any message level 4 and above.
|
|
'fatal(5)' logs message level 5 only"
|
|
|
|
DEFVAL { info }
|
|
::= { rcLogLoggingGlobal 2 }
|
|
|
|
|
|
--SyslogRootCertificate Tbl
|
|
|
|
rcSyslogRootCertificateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSyslogRootCertificateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing file-name and actio to be performed on the
|
|
serever root certificate"
|
|
::= { rcSyslog 5 }
|
|
|
|
|
|
rcSyslogRootCertificateEntry OBJECT-TYPE
|
|
SYNTAX RcSyslogRootCertificateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing name of the server root certificate and
|
|
the action to be performed on it"
|
|
|
|
INDEX { rcSyslogRootCertificateFilename }
|
|
::= { rcSyslogRootCertificateTable 1 }
|
|
|
|
RcSyslogRootCertificateEntry ::= SEQUENCE {
|
|
rcSyslogRootCertificateFilename DisplayString,
|
|
rcSyslogRootCertificateAction INTEGER,
|
|
rcSyslogRootCertificateRowStatus RowStatus
|
|
}
|
|
|
|
rcSyslogRootCertificateFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..128))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Root certificate file of a Syslog Server to be installed or
|
|
uninstalled. It requires object rcSyslogRootCertificate to be install or uninstall or none"
|
|
::= { rcSyslogRootCertificateEntry 1 }
|
|
|
|
rcSyslogRootCertificateAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(1),
|
|
install(2),
|
|
uninstall(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To install/uninstall Root certificate file of a Syslog Server. It requires the
|
|
object rcSyslogGlobalSecureForwadingCertFilename with a valid certification file.
|
|
it always return noAction for query"
|
|
|
|
DEFVAL { noAction }
|
|
::= { rcSyslogRootCertificateEntry 2 }
|
|
|
|
|
|
rcSyslogRootCertificateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcSyslogRootCertificateTable."
|
|
::= { rcSyslogRootCertificateEntry 3 }
|
|
|
|
|
|
-- Diag Mirror by port Table
|
|
|
|
rcDiagMirrorByPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDiagMirrorByPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to configure the Mirror By
|
|
Port feature. This feature allows the device
|
|
to forward a copy of each packet seen on a
|
|
particular port to a different port."
|
|
::= { rcDiag 1 }
|
|
|
|
rcDiagMirrorByPortEntry OBJECT-TYPE
|
|
SYNTAX RcDiagMirrorByPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing mirror by port information."
|
|
INDEX { rcDiagMirrorByPortId }
|
|
::= { rcDiagMirrorByPortTable 1 }
|
|
|
|
RcDiagMirrorByPortEntry ::= SEQUENCE {
|
|
rcDiagMirrorByPortId INTEGER,
|
|
rcDiagMirrorByPortMirroredPort InterfaceIndex,
|
|
rcDiagMirrorByPortMirroringPort InterfaceIndex,
|
|
rcDiagMirrorByPortMode INTEGER,
|
|
rcDiagMirrorByPortEnable TruthValue,
|
|
rcDiagMirrorByPortRowStatus RowStatus,
|
|
rcDiagMirrorByPortOctapidId Integer32, -- obsolete
|
|
rcDiagMirrorByPortPid Integer32, -- obsolete
|
|
rcDiagMirrorRemoteMirrorVlanId INTEGER,
|
|
rcDiagMirrorByPortSpEncap TruthValue,
|
|
rcDiagMirrorByPortGranularity INTEGER,
|
|
rcDiagMirrorByPortMirroredPortList PortSet,
|
|
rcDiagMirrorByPortMirroringPortList PortSet,
|
|
rcDiagMirrorMirroringVlanId Integer32,
|
|
rcDiagMirrorMirroringMltId Integer32,
|
|
rcDiagMirrorMirroringMgId Integer32,
|
|
rcDiagMirrorMirroringIpAddr IpAddress,
|
|
rcDiagMirrorMirroringIpTtl Integer32,
|
|
rcDiagMirrorMirroringIpDscp Integer32,
|
|
rcDiagMirrorByPortScope INTEGER,
|
|
rcDiagMirrorMonitoringIsidOffset Integer32,
|
|
rcDiagMirrorMonitoringIsid Integer32,
|
|
rcDiagMirrorMirroringQos Integer32
|
|
}
|
|
|
|
rcDiagMirrorByPortId OBJECT-TYPE
|
|
SYNTAX INTEGER(1..479)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Entry id."
|
|
::= { rcDiagMirrorByPortEntry 1 }
|
|
|
|
rcDiagMirrorByPortMirroredPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Used to configure the 'mirrored' port. The port
|
|
where packets are copied from."
|
|
::= { rcDiagMirrorByPortEntry 2 }
|
|
|
|
rcDiagMirrorByPortMirroringPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Used to configure the 'mirroring' port. The port
|
|
where packets are copied to."
|
|
::= { rcDiagMirrorByPortEntry 3 }
|
|
|
|
rcDiagMirrorByPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tx(1),
|
|
rx(2),
|
|
both(3),
|
|
rxFilter(4),
|
|
txFilter(5),
|
|
bothFilter(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the 'mode' of the mirror operation.
|
|
'tx' means packets being transmitted on the 'mirrored'
|
|
port will be copied. 'rx' means packets received on
|
|
the 'mirrored' port will be copied. 'both' means
|
|
all traffic on the 'mirrored' port will be copied.
|
|
'rxFilter' means packets received on the 'mirrored'
|
|
port is copied only if it macthes filter criteria.
|
|
'txFilter' means packets being transmitted on the
|
|
'mirrorred' port is copied only if it matches filter
|
|
criteria. 'bothFilter' means both ingress and egress
|
|
traffic will be copied if it matches either ingress or
|
|
egress filter on the 'mirrored' port."
|
|
DEFVAL { rx }
|
|
::= { rcDiagMirrorByPortEntry 4 }
|
|
|
|
rcDiagMirrorByPortEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable this entry."
|
|
DEFVAL { true }
|
|
::= { rcDiagMirrorByPortEntry 5 }
|
|
|
|
rcDiagMirrorByPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcDiagMirrorByPortEntry 6 }
|
|
|
|
rcDiagMirrorByPortOctapidId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Octapid Id for a port."
|
|
::= { rcDiagMirrorByPortEntry 7 }
|
|
|
|
rcDiagMirrorByPortPid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Pid for a port."
|
|
::= { rcDiagMirrorByPortEntry 8 }
|
|
|
|
rcDiagMirrorRemoteMirrorVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER(0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "vlan-id to which mirrored packets needs to
|
|
be send for remote mirroring. If set, this
|
|
vlan id is used in mirror tag of the remote
|
|
mirrored packet"
|
|
::= { rcDiagMirrorByPortEntry 9 }
|
|
|
|
rcDiagMirrorByPortSpEncap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"disable/enable service provide encapsulation. If this
|
|
attribute is true the mirrored packets contains the service provider
|
|
encapsulation, OEL2 and Mac-in-Mac encapsulation are supported."
|
|
DEFVAL { false }
|
|
::= { rcDiagMirrorByPortEntry 10 }
|
|
|
|
rcDiagMirrorByPortGranularity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
physicalPortLevel(1),
|
|
serviceLevel(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to configure the 'granularity' of the mirror
|
|
operation physicalPort means all traffic ingressing or egressing out of
|
|
the mirrored port shall be copied to the mirroring port.
|
|
services means all traffic ingressing or egressing out of the
|
|
end-point/cust-ip-vlan shall be copied to the mirroring port."
|
|
DEFVAL { physicalPortLevel }
|
|
::= { rcDiagMirrorByPortEntry 11 }
|
|
|
|
rcDiagMirrorByPortMirroredPortList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the 'mirrored' port. The port
|
|
where packets are copied from."
|
|
::= { rcDiagMirrorByPortEntry 12 }
|
|
|
|
rcDiagMirrorByPortMirroringPortList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the 'mirroring' port. The port
|
|
where packets are copied from."
|
|
::= { rcDiagMirrorByPortEntry 13 }
|
|
|
|
rcDiagMirrorMirroringVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Destination is a VLAN."
|
|
::= { rcDiagMirrorByPortEntry 14 }
|
|
|
|
rcDiagMirrorMirroringMltId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Destination is an MLT."
|
|
::= { rcDiagMirrorByPortEntry 15 }
|
|
|
|
rcDiagMirrorMirroringMgId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Contains information about the MGID allocated."
|
|
::= { rcDiagMirrorByPortEntry 16 }
|
|
|
|
rcDiagMirrorMirroringIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination IP address."
|
|
::= { rcDiagMirrorByPortEntry 17 }
|
|
|
|
rcDiagMirrorMirroringIpTtl OBJECT-TYPE
|
|
SYNTAX Integer32 (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ttl value for the mirrored packet when mirror
|
|
destination is IP. If other than default,
|
|
the encapsulated packet will have the given ttl."
|
|
DEFVAL { 64 }
|
|
::= { rcDiagMirrorByPortEntry 18 }
|
|
|
|
rcDiagMirrorMirroringIpDscp OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Dscp value for mirrored packets when mirror
|
|
destination is IP. If other than default,
|
|
the encapsulated packet will have the given
|
|
Dscp value."
|
|
DEFVAL { 0 }
|
|
::= { rcDiagMirrorByPortEntry 19 }
|
|
|
|
rcDiagMirrorByPortScope OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
chassis(1),
|
|
slice(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the port mirroring scope.
|
|
Chassis is the default option which allows
|
|
mirroring among ports from different slots.
|
|
Slice option requires both mirroring and
|
|
mirrored ports to be within the same slice.
|
|
Scope configuration only allowed in creation
|
|
but cannot be changed unless recreate."
|
|
DEFVAL { chassis }
|
|
::= { rcDiagMirrorByPortEntry 20 }
|
|
|
|
rcDiagMirrorMonitoringIsidOffset OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the monitoring ISID offset value.
|
|
The offset id value is mapped to actual monitor I-SID value
|
|
in which packets are mirrored to."
|
|
::= { rcDiagMirrorByPortEntry 21 }
|
|
|
|
rcDiagMirrorMonitoringIsid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Actual monitor I-SID value in which packets are mirrored to."
|
|
::= { rcDiagMirrorByPortEntry 22 }
|
|
|
|
rcDiagMirrorMirroringQos OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to define the Quality of Service (QoS) profiles for
|
|
the mirrored packet into monitoring ISID."
|
|
DEFVAL { 1 }
|
|
::= { rcDiagMirrorByPortEntry 23 }
|
|
|
|
|
|
-- Diag Port Conv Steering Table
|
|
|
|
rcDiagPortConvSteeringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDiagPortConvSteeringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Diag Port Conv Steering Table"
|
|
::= { rcDiag 2 }
|
|
|
|
rcDiagPortConvSteeringEntry OBJECT-TYPE
|
|
SYNTAX RcDiagPortConvSteeringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Diag Port Conv Steering."
|
|
INDEX { rcDiagPortConvSteeringId }
|
|
::= { rcDiagPortConvSteeringTable 1 }
|
|
|
|
RcDiagPortConvSteeringEntry ::= SEQUENCE {
|
|
rcDiagPortConvSteeringId Integer32,
|
|
rcDiagPortConvSteeringPortOne Integer32,
|
|
rcDiagPortConvSteeringPortTwo Integer32,
|
|
rcDiagPortConvSteeringMode INTEGER,
|
|
rcDiagPortConvSteeringForwardPort Integer32,
|
|
rcDiagPortConvSteeringEnable TruthValue,
|
|
rcDiagPortConvSteeringRowStatus RowStatus
|
|
}
|
|
|
|
rcDiagPortConvSteeringId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Entry id."
|
|
::= { rcDiagPortConvSteeringEntry 1 }
|
|
|
|
rcDiagPortConvSteeringPortOne OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IfIndex for port one"
|
|
::= { rcDiagPortConvSteeringEntry 2 }
|
|
|
|
rcDiagPortConvSteeringPortTwo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IfIndex for port two"
|
|
::= { rcDiagPortConvSteeringEntry 3 }
|
|
|
|
rcDiagPortConvSteeringMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
oneToTwo(1),
|
|
twoToOne(2),
|
|
both(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the traffic flow that should be
|
|
captured between ports one and two."
|
|
::= { rcDiagPortConvSteeringEntry 4 }
|
|
|
|
rcDiagPortConvSteeringForwardPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IfIndex of the port where captured traffic should
|
|
be forwarded to."
|
|
::= { rcDiagPortConvSteeringEntry 5 }
|
|
|
|
rcDiagPortConvSteeringEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable this entry."
|
|
DEFVAL { true }
|
|
::= { rcDiagPortConvSteeringEntry 6 }
|
|
|
|
rcDiagPortConvSteeringRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcDiagMirrorByPortTable."
|
|
::= { rcDiagPortConvSteeringEntry 7 }
|
|
|
|
|
|
-- Diag Mac Conv Steering Table
|
|
|
|
rcDiagMacConvSteeringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDiagMacConvSteeringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Diag Mac Conv Steering Table"
|
|
::= { rcDiag 3 }
|
|
|
|
rcDiagMacConvSteeringEntry OBJECT-TYPE
|
|
SYNTAX RcDiagMacConvSteeringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Diag Mac Conv Steering."
|
|
INDEX { rcDiagMacConvSteeringId }
|
|
::= { rcDiagMacConvSteeringTable 1 }
|
|
|
|
RcDiagMacConvSteeringEntry ::= SEQUENCE {
|
|
rcDiagMacConvSteeringId Integer32,
|
|
rcDiagMacConvSteeringSrcMac MacAddress,
|
|
rcDiagMacConvSteeringDstMac MacAddress,
|
|
rcDiagMacConvSteeringInPort Integer32,
|
|
rcDiagMacConvSteeringForwardPort Integer32,
|
|
rcDiagMacConvSteeringEnable TruthValue,
|
|
rcDiagMacConvSteeringRowStatus RowStatus
|
|
}
|
|
|
|
rcDiagMacConvSteeringId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Entry id."
|
|
::= { rcDiagMacConvSteeringEntry 1 }
|
|
|
|
rcDiagMacConvSteeringSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source MAC address"
|
|
::= { rcDiagMacConvSteeringEntry 2 }
|
|
|
|
rcDiagMacConvSteeringDstMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination MAC address"
|
|
::= { rcDiagMacConvSteeringEntry 3 }
|
|
|
|
rcDiagMacConvSteeringInPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IfIndex of ingress port."
|
|
::= { rcDiagMacConvSteeringEntry 4 }
|
|
|
|
rcDiagMacConvSteeringForwardPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IfIndex of the port where captured traffic should
|
|
be forwarded to."
|
|
::= { rcDiagMacConvSteeringEntry 5 }
|
|
|
|
rcDiagMacConvSteeringEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable this entry."
|
|
DEFVAL { true }
|
|
::= { rcDiagMacConvSteeringEntry 6 }
|
|
|
|
rcDiagMacConvSteeringRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcDiagMirrorByPortTable."
|
|
::= { rcDiagMacConvSteeringEntry 7 }
|
|
|
|
-- Diag Vct Table
|
|
|
|
rcDiagVctTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDiagVctEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Diag Vct Table"
|
|
::= { rcDiag 4 }
|
|
|
|
rcDiagVctEntry OBJECT-TYPE
|
|
SYNTAX RcDiagVctEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing cable infomation and test result."
|
|
INDEX { rcDiagVctIfIndex }
|
|
::= { rcDiagVctTable 1 }
|
|
|
|
RcDiagVctEntry ::=
|
|
SEQUENCE {
|
|
rcDiagVctIfIndex InterfaceIndex,
|
|
rcDiagVctNormalCableLength INTEGER,
|
|
rcDiagVctPhyType INTEGER,
|
|
rcDiagVctCableStatus INTEGER,
|
|
rcDiagVctPair1Status INTEGER,
|
|
rcDiagVctPair1ErrLength Integer32,
|
|
rcDiagVctPair2Status INTEGER,
|
|
rcDiagVctPair2ErrLength Integer32,
|
|
rcDiagVctPair3Status INTEGER,
|
|
rcDiagVctPair3ErrLength Integer32,
|
|
rcDiagVctPair4Status INTEGER,
|
|
rcDiagVctPair4ErrLength Integer32,
|
|
rcDiagVctStartTest TruthValue,
|
|
rcDiagVctTestDone TruthValue,
|
|
rcDiagVctCableCategory INTEGER,
|
|
rcDiagVctCableLength Integer32,
|
|
rcDiagVctPair1Polarity INTEGER,
|
|
rcDiagVctPair1Swap INTEGER,
|
|
rcDiagVctPair1Skew Integer32,
|
|
rcDiagVctPair2Polarity INTEGER,
|
|
rcDiagVctPair2Swap INTEGER,
|
|
rcDiagVctPair2Skew Integer32,
|
|
rcDiagVctPair3Polarity INTEGER,
|
|
rcDiagVctPair3Swap INTEGER,
|
|
rcDiagVctPair3Skew Integer32,
|
|
rcDiagVctPair4Polarity INTEGER,
|
|
rcDiagVctPair4Swap INTEGER,
|
|
rcDiagVctPair4Skew Integer32
|
|
}
|
|
|
|
rcDiagVctIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port IfIndex."
|
|
::= { rcDiagVctEntry 1 }
|
|
|
|
rcDiagVctNormalCableLength OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cableLT50M(1),
|
|
cable50M80M(2),
|
|
cable80M110M(3),
|
|
cable110M140M(4),
|
|
cableGT140M(5),
|
|
cableUnknown(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cable length, this indicates a range in which the
|
|
actual length falls."
|
|
::= { rcDiagVctEntry 2 }
|
|
|
|
rcDiagVctPhyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
phy100M(1),
|
|
phy1000M(2),
|
|
phy10000M(3),
|
|
phy100000M(4),
|
|
phyUnknown(5),
|
|
bcm5464(6),
|
|
bcm5464s(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Phy type, 100MHz throught 1 GHz, or broadcom phy."
|
|
::= { rcDiagVctEntry 3 }
|
|
|
|
rcDiagVctCableStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cableFail(1),
|
|
cableNormal(2),
|
|
cableOpen(3),
|
|
cableShorted(4),
|
|
cableNotApplicable(5),
|
|
cableUntested(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the cable as a whole. The status of a
|
|
cable is in a sense, a summation of the status of its
|
|
pairs. If all the pairs are normal, then the cable is
|
|
normal. If the cable consists of zero or more normal
|
|
pairs and one or more open pairs, then the cable is
|
|
considered open. If it consists of shorted pairs and
|
|
normal pairs, then the cable is considered shorted.
|
|
Any combination of open and shorted pairs is
|
|
considered simply FAILED."
|
|
::= { rcDiagVctEntry 4 }
|
|
|
|
rcDiagVctPair1Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pairFail(1),
|
|
pairNormal(2),
|
|
pairOpen(3),
|
|
pairShorted(4),
|
|
pairNotApplicable(5),
|
|
pairNotTested(6),
|
|
pairForce(7),
|
|
pinShort(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of a single pair in the cable"
|
|
::= { rcDiagVctEntry 5 }
|
|
|
|
rcDiagVctPair1ErrLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Error Pair Length, in meters, measured by Time
|
|
Domain Reflectometry."
|
|
::= { rcDiagVctEntry 6 }
|
|
|
|
rcDiagVctPair2Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pairFail(1),
|
|
pairNormal(2),
|
|
pairOpen(3),
|
|
pairShorted(4),
|
|
pairNotApplicable(5),
|
|
pairNotTested(6),
|
|
pairForce(7),
|
|
pinShort(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of a single pair in the cable"
|
|
::= { rcDiagVctEntry 7 }
|
|
|
|
rcDiagVctPair2ErrLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Error Pair Length, in meters, measured by Time
|
|
Domain Reflectometry."
|
|
::= { rcDiagVctEntry 8 }
|
|
|
|
rcDiagVctPair3Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pairFail(1),
|
|
pairNormal(2),
|
|
pairOpen(3),
|
|
pairShorted(4),
|
|
pairNotApplicable(5),
|
|
pairNotTested(6),
|
|
pairForce(7),
|
|
pinShort(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of a single pair in the cable"
|
|
::= { rcDiagVctEntry 9 }
|
|
|
|
rcDiagVctPair3ErrLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Error Pair Length, in meters, measured by Time
|
|
Domain Reflectometry."
|
|
::= { rcDiagVctEntry 10 }
|
|
|
|
rcDiagVctPair4Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pairFail(1),
|
|
pairNormal(2),
|
|
pairOpen(3),
|
|
pairShorted(4),
|
|
pairNotApplicable(5),
|
|
pairNotTested(6),
|
|
pairForce(7),
|
|
pinShort(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of a single pair in the cable"
|
|
::= { rcDiagVctEntry 11 }
|
|
|
|
rcDiagVctPair4ErrLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Error Pair Length, in meters, measured by Time
|
|
Domain Reflectometry."
|
|
::= { rcDiagVctEntry 12 }
|
|
|
|
rcDiagVctStartTest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start VCT test, Set this object to TRUE to perform
|
|
a VCT test on the current port. A get on this
|
|
object produces an undefines value."
|
|
::= { rcDiagVctEntry 13 }
|
|
|
|
rcDiagVctTestDone OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When a VCT test is started setting rcDiagVctStartTest,
|
|
this object is immediately set to FALSE by the switch
|
|
software. It remain FALSE until the test is completed,
|
|
when it is set to TRUE. When this object is TRUE,
|
|
then the management station can immediately perform
|
|
a GET on the test result for this port."
|
|
::= { rcDiagVctEntry 14 }
|
|
|
|
rcDiagVctCableCategory OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cat3(1),
|
|
cat5(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Cable type: CAT3 or CAT5."
|
|
::= { rcDiagVctEntry 15 }
|
|
|
|
rcDiagVctCableLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "Meters"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length of cable in meters based on average electrical
|
|
length of 4 pairs. Measurement can be done when
|
|
traffic is live or not."
|
|
::= { rcDiagVctEntry 16 }
|
|
|
|
rcDiagVctPair1Polarity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inversed(1),
|
|
normal(2),
|
|
invalid(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The polarity of a single pair in the cable."
|
|
::= { rcDiagVctEntry 17 }
|
|
|
|
rcDiagVctPair1Swap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
swapped(2),
|
|
invalid(3),
|
|
error(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The pair swap in the cable."
|
|
::= { rcDiagVctEntry 18 }
|
|
|
|
rcDiagVctPair1Skew OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Differential cable pair length in meters.
|
|
Skew measurement can only be performed when cable
|
|
gigabit link is up regardless of traffic activity.
|
|
A value of -1 means an error occured when trying
|
|
to get the length."
|
|
::= { rcDiagVctEntry 19 }
|
|
|
|
rcDiagVctPair2Polarity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inversed(1),
|
|
normal(2),
|
|
invalid(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The polarity of a single pair in the cable."
|
|
::= { rcDiagVctEntry 20 }
|
|
|
|
rcDiagVctPair2Swap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
swapped(2),
|
|
invalid(3),
|
|
error(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The pair swap in the cable."
|
|
::= { rcDiagVctEntry 21 }
|
|
|
|
rcDiagVctPair2Skew OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Differential cable pair length in meters.
|
|
Skew measurement can only be performed when cable
|
|
gigabit link is up regardless of traffic activity.
|
|
A value of -1 means an error occured when trying
|
|
to get the length."
|
|
::= { rcDiagVctEntry 22 }
|
|
|
|
rcDiagVctPair3Polarity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inversed(1),
|
|
normal(2),
|
|
invalid(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The polarity of a single pair in the cable."
|
|
::= { rcDiagVctEntry 23 }
|
|
|
|
rcDiagVctPair3Swap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
swapped(2),
|
|
invalid(3),
|
|
error(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The pair swap in the cable."
|
|
::= { rcDiagVctEntry 24 }
|
|
|
|
rcDiagVctPair3Skew OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Differential cable pair length in meters.
|
|
Skew measurement can only be performed when cable
|
|
gigabit link is up regardless of traffic activity.
|
|
A value of -1 means an error occured when trying
|
|
to get the length."
|
|
::= { rcDiagVctEntry 25 }
|
|
|
|
rcDiagVctPair4Polarity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inversed(1),
|
|
normal(2),
|
|
invalid(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The polarity of a single pair in the cable."
|
|
::= { rcDiagVctEntry 26 }
|
|
|
|
rcDiagVctPair4Swap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
swapped(2),
|
|
invalid(3),
|
|
error(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The pair swap in the cable."
|
|
::= { rcDiagVctEntry 27 }
|
|
|
|
rcDiagVctPair4Skew OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Differential cable pair length in meters.
|
|
Skew measurement can only be performed when cable
|
|
gigabit link is up regardless of traffic activity.
|
|
A value of -1 means an error occured when trying
|
|
to get the length."
|
|
::= { rcDiagVctEntry 28 }
|
|
|
|
|
|
rcDiagSaveConfig OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to configure whether the various mirror feature
|
|
settings should be saved and restored across system
|
|
reboot."
|
|
::= { rcDiag 10 }
|
|
|
|
rcDiagMirrorByPortTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate table size."
|
|
::= { rcDiag 11 }
|
|
|
|
rcDiagPortConvSteeringTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate table size."
|
|
::= { rcDiag 12 }
|
|
|
|
rcDiagMacConvSteeringTblSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate table size."
|
|
::= { rcDiag 13 }
|
|
|
|
rcDiagDiagnosticsEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to enable/disable the mirroring feature
|
|
for the entire device. This setting overrides
|
|
any setting in the various mirroring tables."
|
|
DEFVAL { false }
|
|
::= { rcDiag 14 }
|
|
|
|
|
|
-- rcDiagPcap Group
|
|
|
|
rcDiagPcap OBJECT IDENTIFIER ::= { rcDiag 15 }
|
|
|
|
rcDiagPcapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable pcap in secondary CPU"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcap 1 }
|
|
|
|
rcDiagPcapBufferWrap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable buffer wrap-around when buffer is full.
|
|
If set, pcap will continue to capture pkts, otherwise
|
|
stops pkt storing"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcap 2 }
|
|
|
|
rcDiagPcapPcmciaWrap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To wrap around the PCMCIA when saving data in PCMCIA.
|
|
In Vsp,the name has been changed to wrap-auto-save-file.
|
|
When this parameter is true it overwrites the file present on extflash/network during autosave.
|
|
If this parameter is set to false the file present is not overwritten."
|
|
DEFVAL { false }
|
|
::= { rcDiagPcap 3 }
|
|
|
|
rcDiagPcapFrameSize OBJECT-TYPE
|
|
SYNTAX INTEGER (64..9600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of bytes of pkts needs to be stored"
|
|
DEFVAL { 64 }
|
|
::= { rcDiagPcap 4 }
|
|
|
|
rcDiagPcapBufferSize OBJECT-TYPE
|
|
SYNTAX INTEGER (2..420)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "memory to be allocated for capturing the pkt"
|
|
DEFVAL { 32 }
|
|
::= { rcDiagPcap 5 }
|
|
|
|
rcDiagPcapAutoSave OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To save data automatically when buffer is full"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcap 6 }
|
|
|
|
rcDiagPcapAutoSaveFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of the file in which the pkt is to be stored"
|
|
::= { rcDiagPcap 7 }
|
|
|
|
rcDiagPcapAutoSaveDevice OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pcmcia(0),
|
|
network(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Where to store the captured pkts. If the option is
|
|
network, the user need to enter an IP address also"
|
|
::= { rcDiagPcap 8 }
|
|
|
|
rcDiagPcapAutoSaveNetworkIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ip address of the remote host where the data
|
|
needs to be stored. This field is valid only
|
|
if the device is network"
|
|
::= { rcDiagPcap 9 }
|
|
|
|
|
|
rcDiagPcapFilterTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
Filter table"
|
|
::= { rcDiagPcap 10 }
|
|
|
|
|
|
-- rcDiagPcapFilterTable
|
|
|
|
rcDiagPcapFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDiagPcapFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store pcap secondary filters"
|
|
::= { rcDiagPcap 11 }
|
|
|
|
rcDiagPcapFilterEntry OBJECT-TYPE
|
|
SYNTAX RcDiagPcapFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pcap secondary filter desc"
|
|
INDEX {rcDiagPcapFilterId }
|
|
::= { rcDiagPcapFilterTable 1 }
|
|
|
|
RcDiagPcapFilterEntry ::= SEQUENCE {
|
|
rcDiagPcapFilterId INTEGER,
|
|
rcDiagPcapFilterEnable EnableValue,
|
|
rcDiagPcapFilterAction INTEGER,
|
|
rcDiagPcapFilterSrcMac MacAddress,
|
|
rcDiagPcapFilterSrcMask INTEGER,
|
|
rcDiagPcapFilterIsInverseSrcMac TruthValue,
|
|
rcDiagPcapFilterDstMac MacAddress,
|
|
rcDiagPcapFilterDstMask INTEGER,
|
|
rcDiagPcapFilterIsInverseDstMac TruthValue,
|
|
rcDiagPcapFilterVlanId INTEGER,
|
|
rcDiagPcapFilterToVlanId INTEGER,
|
|
rcDiagPcapFilterIsInverseVlanId TruthValue,
|
|
rcDiagPcapFilterPbit INTEGER,
|
|
rcDiagPcapFilterToPbit INTEGER,
|
|
rcDiagPcapFilterIsInversePbit TruthValue,
|
|
rcDiagPcapFilterEtherType INTEGER,
|
|
rcDiagPcapFilterToEtherType INTEGER,
|
|
rcDiagPcapFilterIsInverseEtherType TruthValue,
|
|
rcDiagPcapFilterProtocolType INTEGER,
|
|
rcDiagPcapFilterToProtocolType INTEGER,
|
|
rcDiagPcapFilterIsInverseProtocolType TruthValue,
|
|
rcDiagPcapFilterSrcIp IpAddress,
|
|
rcDiagPcapFilterToSrcIp IpAddress,
|
|
rcDiagPcapFilterIsInverseSrcIp TruthValue,
|
|
rcDiagPcapFilterDstIp IpAddress,
|
|
rcDiagPcapFilterToDstIp IpAddress,
|
|
rcDiagPcapFilterIsInverseDstIp TruthValue,
|
|
rcDiagPcapFilterDscp INTEGER,
|
|
rcDiagPcapFilterToDscp INTEGER,
|
|
rcDiagPcapFilterIsInverseDscp TruthValue,
|
|
rcDiagPcapFilterRowStatus RowStatus,
|
|
rcDiagPcapFilterDscpMatchZero TruthValue,
|
|
rcDiagPcapFilterPbitMatchZero TruthValue
|
|
}
|
|
|
|
rcDiagPcapFilterId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Unique ID that represents the filter"
|
|
::= { rcDiagPcapFilterEntry 1 }
|
|
|
|
rcDiagPcapFilterEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Filter is enabled or not"
|
|
DEFVAL { disable }
|
|
::= { rcDiagPcapFilterEntry 2 }
|
|
|
|
rcDiagPcapFilterAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
drop(0),
|
|
capture(1),
|
|
trigger-on(2),
|
|
trigger-off(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Action to be takesn when policy is matched"
|
|
DEFVAL { capture }
|
|
::= { rcDiagPcapFilterEntry 3 }
|
|
|
|
rcDiagPcapFilterSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Soruce mac address to match"
|
|
::= { rcDiagPcapFilterEntry 4 }
|
|
|
|
rcDiagPcapFilterSrcMask OBJECT-TYPE
|
|
SYNTAX INTEGER (1..6)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Soruce mac address mask. Used to specify a range"
|
|
DEFVAL { 6 }
|
|
::= { rcDiagPcapFilterEntry 5 }
|
|
|
|
rcDiagPcapFilterIsInverseSrcMac OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Soruce mac address Inverse. when set the mac
|
|
addresses otherthan specified is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 6 }
|
|
|
|
rcDiagPcapFilterDstMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination mac address"
|
|
::= { rcDiagPcapFilterEntry 7 }
|
|
|
|
rcDiagPcapFilterDstMask OBJECT-TYPE
|
|
SYNTAX INTEGER (1..6)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination mac address mask. Used to specify a range"
|
|
DEFVAL { 6 }
|
|
::= { rcDiagPcapFilterEntry 8 }
|
|
|
|
rcDiagPcapFilterIsInverseDstMac OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination mac address Inverse. when set the mac
|
|
addresses otherthan specified is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 9 }
|
|
|
|
rcDiagPcapFilterVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4092)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vlan-id of the packet to be matched"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 10 }
|
|
|
|
rcDiagPcapFilterToVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4092)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To Vlan-id. Used to specify a range"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 11 }
|
|
|
|
rcDiagPcapFilterIsInverseVlanId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vlan-Id Inverse. when set the Vlan-Id
|
|
otherthan specified range is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 12 }
|
|
rcDiagPcapFilterPbit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "pBit of the packet to be matched"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 13 }
|
|
|
|
rcDiagPcapFilterToPbit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To pBit. Used to specify a range"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 14 }
|
|
|
|
rcDiagPcapFilterIsInversePbit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "pBit Inverse. when set the pBit
|
|
otherthan specified range is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 15 }
|
|
|
|
rcDiagPcapFilterEtherType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "EtherType of the packet to be matched"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 16 }
|
|
|
|
rcDiagPcapFilterToEtherType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To EtherType. Used to specify a range"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 17 }
|
|
|
|
rcDiagPcapFilterIsInverseEtherType OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "EtherType Inverse. when set the EtherType
|
|
otherthan specified range is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 18 }
|
|
|
|
rcDiagPcapFilterProtocolType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ProtocolType of the packet to be matched"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 19 }
|
|
|
|
rcDiagPcapFilterToProtocolType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To ProtocolType. Used to specify a range"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 20 }
|
|
|
|
rcDiagPcapFilterIsInverseProtocolType OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ProtocolType Inverse. when set the ProtocolType
|
|
otherthan specified range is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 21 }
|
|
|
|
rcDiagPcapFilterSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source IP address of the packet to be matched"
|
|
::= { rcDiagPcapFilterEntry 22 }
|
|
|
|
rcDiagPcapFilterToSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To Source IP address. Used to specify a range"
|
|
::= { rcDiagPcapFilterEntry 23 }
|
|
|
|
rcDiagPcapFilterIsInverseSrcIp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source IP address Inverse. when set the source IP
|
|
otherthan specified range is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 24 }
|
|
|
|
rcDiagPcapFilterDstIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination IP address of the packet to be matched"
|
|
::= { rcDiagPcapFilterEntry 25 }
|
|
|
|
rcDiagPcapFilterToDstIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To Destination IP address. Used to specify a range"
|
|
::= { rcDiagPcapFilterEntry 26 }
|
|
|
|
rcDiagPcapFilterIsInverseDstIp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination IP address Inverse. when set the
|
|
Destination IP otherthan specified is range
|
|
matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 27 }
|
|
|
|
rcDiagPcapFilterDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "DSCP value of the packet to be matched"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 28 }
|
|
|
|
rcDiagPcapFilterToDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To DSCP. Used to specify a range"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapFilterEntry 29 }
|
|
|
|
rcDiagPcapFilterIsInverseDscp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "DSCP Inverse. when set the DSCP
|
|
otherthan specified range is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 30 }
|
|
|
|
rcDiagPcapFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row Status"
|
|
::= { rcDiagPcapFilterEntry 31 }
|
|
|
|
rcDiagPcapFilterDscpMatchZero OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this value is set to true, then 0 value of
|
|
Pbit is not taken as disable value. The user will
|
|
be allowed to capture packets with Pbit value of
|
|
0 also. Be default it would be set to FALSE"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 32 }
|
|
|
|
rcDiagPcapFilterPbitMatchZero OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this value is set to true, then 0 value of
|
|
Pbit is not taken as disable value. The user will
|
|
be allowed to capture packets with Pbit value of
|
|
0 also. Be default it would be set to FALSE"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapFilterEntry 33 }
|
|
|
|
|
|
-- rcDiagPcapAdvancedFilterTable
|
|
|
|
|
|
rcDiagPcapAdvancedFilterTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
Filter table advanced parameter"
|
|
::= { rcDiagPcap 12 }
|
|
|
|
rcDiagPcapAdvancedFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDiagPcapAdvancedFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store pcap secondary filters"
|
|
::= { rcDiagPcap 13 }
|
|
|
|
rcDiagPcapAdvancedFilterEntry OBJECT-TYPE
|
|
SYNTAX RcDiagPcapAdvancedFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pcap secondary Advanced filter desc"
|
|
INDEX {rcDiagPcapAdvancedFilterId }
|
|
::= { rcDiagPcapAdvancedFilterTable 1 }
|
|
|
|
RcDiagPcapAdvancedFilterEntry ::= SEQUENCE {
|
|
rcDiagPcapAdvancedFilterId INTEGER,
|
|
rcDiagPcapAdvancedFilterUdpPort INTEGER,
|
|
rcDiagPcapAdvancedFilterToUdpPort INTEGER,
|
|
rcDiagPcapAdvancedFilterIsInverseUdpPort TruthValue,
|
|
rcDiagPcapAdvancedFilterTcpPort INTEGER,
|
|
rcDiagPcapAdvancedFilterToTcpPort INTEGER,
|
|
rcDiagPcapAdvancedFilterIsInverseTcpPort TruthValue,
|
|
rcDiagPcapAdvancedFilterUserDefinedData DisplayString,
|
|
rcDiagPcapAdvancedFilterUserDefinedDataSize INTEGER,
|
|
rcDiagPcapAdvancedFilterUserDefinedOffset INTEGER,
|
|
rcDiagPcapAdvancedFilterIsInverseUserDefined TruthValue,
|
|
rcDiagPcapAdvancedFilterTimer INTEGER,
|
|
rcDiagPcapAdvancedFilterPacketCount INTEGER,
|
|
rcDiagPcapAdvancedFilterRefreshTimer INTEGER,
|
|
rcDiagPcapAdvancedFilterRowStatus RowStatus
|
|
}
|
|
|
|
|
|
rcDiagPcapAdvancedFilterId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Unique ID that represents the filter"
|
|
::= { rcDiagPcapAdvancedFilterEntry 1 }
|
|
|
|
rcDiagPcapAdvancedFilterUdpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "UdpPort of the packet to be matched"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapAdvancedFilterEntry 2 }
|
|
|
|
rcDiagPcapAdvancedFilterToUdpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To UdpPort. Used to specify a range"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapAdvancedFilterEntry 3 }
|
|
|
|
rcDiagPcapAdvancedFilterIsInverseUdpPort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "UdpPort Inverse. when set the UdpPort
|
|
otherthan specified range is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapAdvancedFilterEntry 4 }
|
|
|
|
rcDiagPcapAdvancedFilterTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TcpPort of the packet to be matched"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapAdvancedFilterEntry 5 }
|
|
|
|
rcDiagPcapAdvancedFilterToTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To TcpPort. Used to specify a range"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapAdvancedFilterEntry 6 }
|
|
|
|
rcDiagPcapAdvancedFilterIsInverseTcpPort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TcpPort Inverse. when set the TcpPort
|
|
otherthan specified range is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapAdvancedFilterEntry 7 }
|
|
|
|
rcDiagPcapAdvancedFilterUserDefinedData OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User defined data to match with the packets received"
|
|
DEFVAL { "\0" }
|
|
::= { rcDiagPcapAdvancedFilterEntry 8 }
|
|
|
|
rcDiagPcapAdvancedFilterUserDefinedDataSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..50)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Length of user defined data"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapAdvancedFilterEntry 9 }
|
|
|
|
rcDiagPcapAdvancedFilterUserDefinedOffset OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Offset from which match has to start"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapAdvancedFilterEntry 10 }
|
|
|
|
|
|
rcDiagPcapAdvancedFilterIsInverseUserDefined OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TcpPort Inverse. when set the Userdata
|
|
otherthan specified is matched"
|
|
DEFVAL { false }
|
|
::= { rcDiagPcapAdvancedFilterEntry 11 }
|
|
|
|
rcDiagPcapAdvancedFilterTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Timer to start the pcap capture window in ms"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapAdvancedFilterEntry 12 }
|
|
|
|
rcDiagPcapAdvancedFilterPacketCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of packets to be captured before disabling pcap"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapAdvancedFilterEntry 13 }
|
|
|
|
rcDiagPcapAdvancedFilterRefreshTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Refresh timer in ms"
|
|
DEFVAL { 0 }
|
|
::= { rcDiagPcapAdvancedFilterEntry 14 }
|
|
|
|
rcDiagPcapAdvancedFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "RowStatus"
|
|
::= { rcDiagPcapAdvancedFilterEntry 15 }
|
|
|
|
rcDiagPcapCopyFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the file name. When set, the PCAP
|
|
data from PCAP engine RAM is stored into this file
|
|
in PCAP engine"
|
|
::= { rcDiagPcap 14 }
|
|
|
|
rcDiagPcapResetStat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
resetStat(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To Reset PCAP statistics"
|
|
::= { rcDiagPcap 15 }
|
|
|
|
rcDiagPcapStatPacketCapacityCount OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Packet Capacity Count"
|
|
::= { rcDiagPcap 16 }
|
|
|
|
rcDiagPcapStatNumberOfPacketsReceived OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets received in PCAP engine"
|
|
::= { rcDiagPcap 17 }
|
|
|
|
rcDiagPcapStatNumberOfPacketsAccumulated OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets captured in PCAP engine"
|
|
::= { rcDiagPcap 18 }
|
|
|
|
rcDiagPcapStatNumberOfPacketsDroppedInPcapEngine OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets dropped in PCAP engine by filters"
|
|
::= { rcDiagPcap 19 }
|
|
|
|
rcDiagPcapStatNumberOfPacketsDroppedInHardware OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets dropped in Hardware"
|
|
::= { rcDiagPcap 20 }
|
|
|
|
rcDiagPcapDataValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A true/false value that indicate the return
|
|
data whether is valid."
|
|
::= { rcDiagPcap 21 }
|
|
|
|
rcDiagPcapEtherTypeForSvlanLevel OBJECT-TYPE
|
|
SYNTAX INTEGER ('05dd'h..'ffff'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "EtherType of svlan level."
|
|
::= { rcDiagPcap 22 }
|
|
|
|
rcDiagLockupDiagnosticEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used as a flag to enable/disable the lockup diagnostic feature
|
|
for the R-Modules"
|
|
DEFVAL { true }
|
|
::= { rcDiag 16 }
|
|
|
|
rcDiagLockupActionEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used as a flag to determine if action is to be taken
|
|
when lockup is detected for r-modules"
|
|
DEFVAL { false }
|
|
::= { rcDiag 17 }
|
|
|
|
-- Diag Monitor by isid Table
|
|
|
|
rcDiagMonitorByIsidTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDiagMonitorByIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure the Monitor By
|
|
Isid feature. This feature allows the device
|
|
to analyze the packets which got mirrored into isid."
|
|
::= { rcDiag 18 }
|
|
|
|
rcDiagMonitorByIsidEntry OBJECT-TYPE
|
|
SYNTAX RcDiagMonitorByIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing monitor by isid information."
|
|
INDEX { rcDiagMonitorByIsidIndex }
|
|
::= { rcDiagMonitorByIsidTable 1 }
|
|
|
|
RcDiagMonitorByIsidEntry ::=
|
|
SEQUENCE {
|
|
rcDiagMonitorByIsidIndex Integer32,
|
|
rcDiagMonitorByIsidMonitorIsidOffset Integer32,
|
|
rcDiagMonitorByIsidMonitorIsid Integer32,
|
|
rcDiagMonitorByIsidEgressPortList PortSet,
|
|
rcDiagMonitorByIsidEgressMltId Integer32,
|
|
rcDiagMonitorByIsidMapToVlanId Integer32,
|
|
rcDiagMonitorByIsidNickname IsisPlsbNodeNickName,
|
|
rcDiagMonitorByIsidEnable TruthValue,
|
|
rcDiagMonitorByIsidRowStatus RowStatus
|
|
}
|
|
|
|
rcDiagMonitorByIsidIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry id."
|
|
::= { rcDiagMonitorByIsidEntry 1 }
|
|
|
|
rcDiagMonitorByIsidMonitorIsidOffset OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the monitoring ISID offset value.
|
|
The offset id value is mapped to actual monitor I-SID value
|
|
in which packets are mirrored to."
|
|
::= { rcDiagMonitorByIsidEntry 2 }
|
|
|
|
rcDiagMonitorByIsidMonitorIsid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Actual monitor I-SID value in which packets are mirrored to."
|
|
::= { rcDiagMonitorByIsidEntry 3 }
|
|
|
|
rcDiagMonitorByIsidEgressPortList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Egress ports to which traffic analyzers are connected."
|
|
::= { rcDiagMonitorByIsidEntry 4 }
|
|
|
|
rcDiagMonitorByIsidEgressMltId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Egress MLT id to which traffic analyzers are connected."
|
|
::= { rcDiagMonitorByIsidEntry 5 }
|
|
|
|
rcDiagMonitorByIsidMapToVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(0..4093)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "VLAN id to map with mirrored traffic on the monitoring node."
|
|
::= { rcDiagMonitorByIsidEntry 6 }
|
|
|
|
rcDiagMonitorByIsidNickname OBJECT-TYPE
|
|
SYNTAX IsisPlsbNodeNickName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Nickname of the BEB from which user wants to analyze the traffic."
|
|
::= { rcDiagMonitorByIsidEntry 7}
|
|
|
|
rcDiagMonitorByIsidEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable this entry."
|
|
DEFVAL { true }
|
|
::= { rcDiagMonitorByIsidEntry 8 }
|
|
|
|
rcDiagMonitorByIsidRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status of this entry."
|
|
::= { rcDiagMonitorByIsidEntry 9 }
|
|
|
|
-- Diag Isid Mirroring Stats Table
|
|
|
|
rcDiagIsidMirroringStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDiagIsidMirroringStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to show/clear
|
|
number of packets which got mirrored into isid."
|
|
::= { rcDiag 19 }
|
|
|
|
rcDiagIsidMirroringStatsEntry OBJECT-TYPE
|
|
SYNTAX RcDiagIsidMirroringStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing isid mirroring stats information."
|
|
INDEX { rcDiagIsidMirroringStatsIndex }
|
|
::= { rcDiagIsidMirroringStatsTable 1 }
|
|
|
|
RcDiagIsidMirroringStatsEntry ::=
|
|
SEQUENCE {
|
|
rcDiagIsidMirroringStatsIndex Integer32,
|
|
rcDiagIsidMirroringStatsMonitorIsid Integer32,
|
|
rcDiagIsidMirroringStatsMirroredPackets Counter32,
|
|
rcDiagIsidMirroringStatsClearStats TruthValue
|
|
}
|
|
|
|
rcDiagIsidMirroringStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Offset id value which is mapped to actual monitor I-SID value."
|
|
::= { rcDiagIsidMirroringStatsEntry 1 }
|
|
|
|
rcDiagIsidMirroringStatsMonitorIsid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Actual monitor I-SID value in which packets are mirrored to."
|
|
::= { rcDiagIsidMirroringStatsEntry 2 }
|
|
|
|
rcDiagIsidMirroringStatsMirroredPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets mirrored into ISID on the mirroring BEB."
|
|
::= { rcDiagIsidMirroringStatsEntry 3 }
|
|
|
|
rcDiagIsidMirroringStatsClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to clear the ISID mirroring statistics."
|
|
DEFVAL { false }
|
|
::= { rcDiagIsidMirroringStatsEntry 4 }
|
|
|
|
-- RCIPX
|
|
-- IPX
|
|
-- IPX Routing Enable
|
|
|
|
rcIpxRoutingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Global Ipx Routing control variable"
|
|
DEFVAL { false }
|
|
::= { rcIpx 1 }
|
|
|
|
-- IPX Address Table
|
|
|
|
rcIpxAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of addressing information relevant to
|
|
this entity's IPX addresses. This table is used
|
|
for associating IfIndex and IPX network number."
|
|
::= { rcIpx 2 }
|
|
|
|
rcIpxAddrEntry OBJECT-TYPE
|
|
SYNTAX RcIpxAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The addressing information for one of this
|
|
entity's IP addresses."
|
|
INDEX { rcIpxAddrVlanId, rcIpxAddrNetAddr, rcIpxAddrEncap }
|
|
::= { rcIpxAddrTable 1 }
|
|
|
|
RcIpxAddrEntry ::=
|
|
SEQUENCE {
|
|
rcIpxAddrVlanId RcVlanIdOrNone,
|
|
rcIpxAddrNetAddr OCTET STRING,
|
|
rcIpxAddrEncap INTEGER,
|
|
rcIpxAddrEntryStatus RowStatus,
|
|
rcIpxAddrTicks INTEGER
|
|
}
|
|
|
|
rcIpxAddrVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
same value of ifIndex."
|
|
::= { rcIpxAddrEntry 1 }
|
|
|
|
rcIpxAddrNetAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address."
|
|
::= { rcIpxAddrEntry 2 }
|
|
|
|
rcIpxAddrEncap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
ethernetii(1),
|
|
snap(2),
|
|
llc(3),
|
|
raw(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specify IPX encapsulation format. It is relevent
|
|
if the VLAN is port based. But it's always nice to have it."
|
|
DEFVAL { none }
|
|
::= { rcIpxAddrEntry 3 }
|
|
|
|
rcIpxAddrEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcIpxAddrEntry."
|
|
::= { rcIpxAddrEntry 4 }
|
|
|
|
rcIpxAddrTicks OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The tick value gets updated to the routing
|
|
table when an ipx address is being assigned
|
|
to a vlan."
|
|
DEFVAL { 1 }
|
|
::= { rcIpxAddrEntry 5 }
|
|
|
|
|
|
-- IPX Policy Net Table
|
|
|
|
rcIpxPolicyNetTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the table."
|
|
::= { rcIpx 3 }
|
|
|
|
rcIpxPolicyNetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxPolicyNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Net Table is used to store the IPX
|
|
network address range. This entry is
|
|
used for Net List Table."
|
|
::= { rcIpx 4 }
|
|
|
|
rcIpxPolicyNetEntry OBJECT-TYPE
|
|
SYNTAX RcIpxPolicyNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcIpxPolicyNetId, rcIpxPolicyNetFromNet, rcIpxPolicyNetToNet}
|
|
::= { rcIpxPolicyNetTable 1 }
|
|
|
|
RcIpxPolicyNetEntry ::=
|
|
SEQUENCE {
|
|
rcIpxPolicyNetId Integer32,
|
|
rcIpxPolicyNetFromNet OCTET STRING,
|
|
rcIpxPolicyNetToNet OCTET STRING,
|
|
rcIpxPolicyNetName DisplayString,
|
|
rcIpxPolicyNetRowStatus RowStatus
|
|
}
|
|
|
|
rcIpxPolicyNetId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Unique ID to represent the entry in the table."
|
|
::= { rcIpxPolicyNetEntry 1 }
|
|
|
|
rcIpxPolicyNetFromNet OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IPX Network Address."
|
|
::= { rcIpxPolicyNetEntry 2 }
|
|
|
|
rcIpxPolicyNetToNet OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is used to specify a range of IPX network addresses.
|
|
This is an optional parameter. The default value is
|
|
NetAddr. In that case the entry refers to a single
|
|
IPX network."
|
|
::= { rcIpxPolicyNetEntry 3 }
|
|
|
|
rcIpxPolicyNetName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Unique Name to represent the entry in the table.
|
|
Id & Name have one-to-one relationship."
|
|
::= { rcIpxPolicyNetEntry 4 }
|
|
|
|
rcIpxPolicyNetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { rcIpxPolicyNetEntry 5 }
|
|
|
|
-- IPX Policy Service Table
|
|
|
|
rcIpxPolicyServTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the table."
|
|
::= { rcIpx 5 }
|
|
|
|
rcIpxPolicyServTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxPolicyServEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Service Table is used to store Service Type
|
|
and Service Name. This is used only for SAP Updates."
|
|
::= { rcIpx 6 }
|
|
|
|
rcIpxPolicyServEntry OBJECT-TYPE
|
|
SYNTAX RcIpxPolicyServEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcIpxPolicyServId, rcIpxPolicyServServiceType, rcIpxPolicyServServiceName}
|
|
::= { rcIpxPolicyServTable 1 }
|
|
|
|
RcIpxPolicyServEntry ::=
|
|
SEQUENCE {
|
|
rcIpxPolicyServId Integer32,
|
|
rcIpxPolicyServServiceType INTEGER,
|
|
rcIpxPolicyServServiceName DisplayString,
|
|
rcIpxPolicyServName DisplayString,
|
|
rcIpxPolicyServRowStatus RowStatus
|
|
}
|
|
|
|
rcIpxPolicyServId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to store the service Id."
|
|
::= { rcIpxPolicyServEntry 1 }
|
|
|
|
rcIpxPolicyServServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to store the service type."
|
|
::= { rcIpxPolicyServEntry 2 }
|
|
|
|
rcIpxPolicyServServiceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..47))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to store the service Name. This is an optional parameter.
|
|
If not entered, '*' is taken as default value. This is
|
|
matched to any service name. Also, '*' can be used to
|
|
match wildcard characters. This is supported only
|
|
at the end of the service name.
|
|
For Eg: Printer* will be matched to Printer1, Printer2,
|
|
Printer123 etc. Service Name matching is CASE SENSITIVE"
|
|
::= { rcIpxPolicyServEntry 3 }
|
|
|
|
rcIpxPolicyServName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to store the entry name. Id & Name have
|
|
one-to-one relationship."
|
|
::= { rcIpxPolicyServEntry 4 }
|
|
|
|
rcIpxPolicyServRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { rcIpxPolicyServEntry 5 }
|
|
|
|
|
|
-- IPX Policy Table
|
|
|
|
rcIpxPolicyListTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the table."
|
|
::= { rcIpx 7 }
|
|
|
|
rcIpxPolicyListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxPolicyListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PolicyList Table is used to store generic policies
|
|
that can be used by both RIP and SAP as their in/out policies."
|
|
::= { rcIpx 8 }
|
|
|
|
rcIpxPolicyListEntry OBJECT-TYPE
|
|
SYNTAX RcIpxPolicyListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcIpxPolicyListId, rcIpxPolicyListSeqnum}
|
|
::= { rcIpxPolicyListTable 1 }
|
|
|
|
RcIpxPolicyListEntry ::=
|
|
SEQUENCE {
|
|
rcIpxPolicyListId INTEGER,
|
|
rcIpxPolicyListSeqnum INTEGER,
|
|
rcIpxPolicyListName DisplayString,
|
|
rcIpxPolicyListEnable TruthValue,
|
|
rcIpxPolicyListAction INTEGER,
|
|
rcIpxPolicyListRouteSource INTEGER,
|
|
rcIpxPolicyListMatchNetList DisplayString,
|
|
rcIpxPolicyListMatchServList DisplayString,
|
|
rcIpxPolicyListHops INTEGER,
|
|
rcIpxPolicyListTicks INTEGER,
|
|
rcIpxPolicyListRowStatus RowStatus
|
|
}
|
|
|
|
rcIpxPolicyListId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index used to uniquely Identify a group of policies
|
|
in the route policy table."
|
|
::= { rcIpxPolicyListEntry 1 }
|
|
|
|
rcIpxPolicyListSeqnum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Second Index used to identify a specific policy
|
|
with in the route policy group (grouped by Id).
|
|
This field allows users to specify different
|
|
MATCH, SET parameters and an action. Also
|
|
used to resolve the tie between 2 matching policies.
|
|
The policy with lower sequence number is used."
|
|
::= { rcIpxPolicyListEntry 2 }
|
|
|
|
rcIpxPolicyListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Is used to group a set of policies with different
|
|
sequence number. Id & Name have one-to-one relationship
|
|
Different policy groups can have same sequence
|
|
number, whereas with in a group the sequence
|
|
must be different."
|
|
::= { rcIpxPolicyListEntry 3 }
|
|
|
|
rcIpxPolicyListEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "value specified here indicates whether the policy is
|
|
enabled or not. If disabled, the policy should not be
|
|
used."
|
|
DEFVAL { false }
|
|
::= { rcIpxPolicyListEntry 4 }
|
|
|
|
rcIpxPolicyListAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This determines what to do with the RIP/SAP packet. If
|
|
the value is 'permit', then only in or out the packet.
|
|
Otherwise, drop the packet."
|
|
DEFVAL { permit }
|
|
::= { rcIpxPolicyListEntry 5 }
|
|
|
|
rcIpxPolicyListRouteSource OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the Route Source of the route Packet.
|
|
This field is used only for announce policies.
|
|
For accept policies, this field is ignored.
|
|
Value is one of multiple (logical 'OR') of following
|
|
values:
|
|
direct(1),
|
|
nlsp(2),
|
|
rip(4),
|
|
static(8),
|
|
any(15)"
|
|
DEFVAL { 15 }
|
|
::= { rcIpxPolicyListEntry 6 }
|
|
|
|
-- Following between =begin =end is processed by mib_tools/extras.awk
|
|
-- =begin enum
|
|
-- rcIpxPolicyListRouteSource direct 1
|
|
-- rcIpxPolicyListRouteSource nlsp 2
|
|
-- rcIpxPolicyListRouteSource rip 4
|
|
-- rcIpxPolicyListRouteSource static 8
|
|
-- rcIpxPolicyListRouteSource any 15
|
|
-- =end enum
|
|
|
|
rcIpxPolicyListMatchNetList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "List of networks to which this policy is applied.
|
|
The Network List Name is entered. When this is not referring to
|
|
any list or the Net List Table to which it is pointing to is empty,
|
|
then THIS POLICY MATCHES ALL NETWORK ADDRESSES."
|
|
::= { rcIpxPolicyListEntry 7 }
|
|
|
|
rcIpxPolicyListMatchServList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "List of service types and Service Names to
|
|
which this policy is applied. The
|
|
Service List name is entered. This field is
|
|
used only for SAP out/in policies. For, RIP
|
|
policies, this field is discarded.
|
|
When this is not referring to any list
|
|
or the Service List Table
|
|
to which it is pointing to is empty, then this
|
|
POLICY MATCHES ALL SERVICE TYPE AND SERVICE NAME."
|
|
::= { rcIpxPolicyListEntry 8 }
|
|
|
|
rcIpxPolicyListHops OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value is used as Hop count for out policies.
|
|
If this field is 0, then Hop count is not modified.
|
|
The default value is '0'. This field is also
|
|
applicable only for Out Policies."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxPolicyListEntry 9 }
|
|
|
|
rcIpxPolicyListTicks OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The tick value which will be updated for RIP when
|
|
the routing method is tick."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxPolicyListEntry 10 }
|
|
|
|
rcIpxPolicyListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { rcIpxPolicyListEntry 11 }
|
|
|
|
-- IPX Rip Out Filter Table
|
|
|
|
rcIpxRipOutFilterTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the table."
|
|
::= { rcIpx 9 }
|
|
|
|
rcIpxRipOutFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxRipOutFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RipOutFilter Table is used to store generic policies
|
|
that can be used by both RIP and SAP as their in/out policies."
|
|
::= { rcIpx 10 }
|
|
|
|
rcIpxRipOutFilterEntry OBJECT-TYPE
|
|
SYNTAX RcIpxRipOutFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcIpxRipOutFilterInterface}
|
|
::= { rcIpxRipOutFilterTable 1 }
|
|
|
|
RcIpxRipOutFilterEntry ::=
|
|
SEQUENCE {
|
|
rcIpxRipOutFilterInterface OCTET STRING,
|
|
rcIpxRipOutFilterPolicyName DisplayString,
|
|
rcIpxRipOutFilterRowStatus RowStatus
|
|
}
|
|
|
|
rcIpxRipOutFilterInterface OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address. The interface to
|
|
which the policy is applied."
|
|
::= { rcIpxRipOutFilterEntry 1 }
|
|
|
|
rcIpxRipOutFilterPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the policy group to which this
|
|
entry refers."
|
|
::= { rcIpxRipOutFilterEntry 2 }
|
|
|
|
rcIpxRipOutFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { rcIpxRipOutFilterEntry 3 }
|
|
|
|
-- IPX Sap Out Filter Table
|
|
|
|
rcIpxSapOutFilterTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the table."
|
|
::= { rcIpx 11 }
|
|
|
|
rcIpxSapOutFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxSapOutFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SapOutFilter Table is used to store generic policies
|
|
that can be used by both RIP and SAP as their in/out policies."
|
|
::= { rcIpx 12 }
|
|
|
|
rcIpxSapOutFilterEntry OBJECT-TYPE
|
|
SYNTAX RcIpxSapOutFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcIpxSapOutFilterInterface}
|
|
::= { rcIpxSapOutFilterTable 1 }
|
|
|
|
RcIpxSapOutFilterEntry ::=
|
|
SEQUENCE {
|
|
rcIpxSapOutFilterInterface OCTET STRING,
|
|
rcIpxSapOutFilterPolicyName DisplayString,
|
|
rcIpxSapOutFilterRowStatus RowStatus
|
|
}
|
|
|
|
rcIpxSapOutFilterInterface OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address. The interface to
|
|
which the policy is applied."
|
|
::= { rcIpxSapOutFilterEntry 1 }
|
|
|
|
rcIpxSapOutFilterPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the policy group to which this
|
|
entry refers."
|
|
::= { rcIpxSapOutFilterEntry 2 }
|
|
|
|
rcIpxSapOutFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { rcIpxSapOutFilterEntry 3 }
|
|
|
|
-- IPX Rip In Filter Table
|
|
|
|
rcIpxRipInFilterTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the table."
|
|
::= { rcIpx 13 }
|
|
|
|
rcIpxRipInFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxRipInFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RipInFilter Table is used to store generic policies
|
|
that can be used by both RIP and SAP as their in/out policies."
|
|
::= { rcIpx 14 }
|
|
|
|
rcIpxRipInFilterEntry OBJECT-TYPE
|
|
SYNTAX RcIpxRipInFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcIpxRipInFilterInterface}
|
|
::= { rcIpxRipInFilterTable 1 }
|
|
|
|
RcIpxRipInFilterEntry ::=
|
|
SEQUENCE {
|
|
rcIpxRipInFilterInterface OCTET STRING,
|
|
rcIpxRipInFilterPolicyName DisplayString,
|
|
rcIpxRipInFilterRowStatus RowStatus
|
|
}
|
|
|
|
rcIpxRipInFilterInterface OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address. The interface to
|
|
which the policy is applied."
|
|
::= { rcIpxRipInFilterEntry 1 }
|
|
|
|
rcIpxRipInFilterPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the policy group to which this
|
|
entry refers."
|
|
::= { rcIpxRipInFilterEntry 2 }
|
|
|
|
rcIpxRipInFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { rcIpxRipInFilterEntry 3 }
|
|
|
|
-- IPX Sap In Filter Table
|
|
|
|
rcIpxSapInFilterTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the table."
|
|
::= { rcIpx 15 }
|
|
|
|
rcIpxSapInFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxSapInFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SapInFilter Table is used to store generic policies
|
|
that can be used by both RIP and SAP as their in/out policies."
|
|
::= { rcIpx 16 }
|
|
|
|
rcIpxSapInFilterEntry OBJECT-TYPE
|
|
SYNTAX RcIpxSapInFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcIpxSapInFilterInterface}
|
|
::= { rcIpxSapInFilterTable 1 }
|
|
|
|
RcIpxSapInFilterEntry ::=
|
|
SEQUENCE {
|
|
rcIpxSapInFilterInterface OCTET STRING,
|
|
rcIpxSapInFilterPolicyName DisplayString,
|
|
rcIpxSapInFilterRowStatus RowStatus
|
|
}
|
|
|
|
rcIpxSapInFilterInterface OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address. The interface to
|
|
which the policy is applied."
|
|
::= { rcIpxSapInFilterEntry 1 }
|
|
|
|
rcIpxSapInFilterPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the policy group to which this
|
|
entry refers."
|
|
::= { rcIpxSapInFilterEntry 2 }
|
|
|
|
rcIpxSapInFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { rcIpxSapInFilterEntry 3 }
|
|
|
|
rcIpxRoutingMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ticks(1),
|
|
hops(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This global variable is referenced each time a decision has to be taken"
|
|
::= { rcIpx 17 }
|
|
|
|
rcIpxSapInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxSapInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SapInterface Table is used to store generic policies
|
|
that can be used by SAP as their in/out policies."
|
|
::= { rcIpx 18 }
|
|
|
|
rcIpxSapInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpxSapInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcIpxSapInterfaceNetNum}
|
|
::= { rcIpxSapInterfaceTable 1 }
|
|
|
|
RcIpxSapInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpxSapInterfaceNetNum OCTET STRING,
|
|
rcIpxSapInterfaceInPolicy DisplayString,
|
|
rcIpxSapInterfaceOutPolicy DisplayString
|
|
}
|
|
|
|
rcIpxSapInterfaceNetNum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address. The interface to
|
|
which the policy is applied."
|
|
::= { rcIpxSapInterfaceEntry 1 }
|
|
|
|
rcIpxSapInterfaceInPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the in filter group to which this
|
|
entry refers."
|
|
::= { rcIpxSapInterfaceEntry 2 }
|
|
|
|
rcIpxSapInterfaceOutPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the out filter to which this
|
|
entry refers."
|
|
::= { rcIpxSapInterfaceEntry 3 }
|
|
|
|
rcIpxRipInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxRipInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RipInterface Table is used to store generic policies
|
|
that can be used by RIP as their in/out policies."
|
|
::= { rcIpx 19 }
|
|
|
|
rcIpxRipInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpxRipInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table entry."
|
|
INDEX { rcIpxRipInterfaceNetNum}
|
|
::= { rcIpxRipInterfaceTable 1 }
|
|
|
|
RcIpxRipInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpxRipInterfaceNetNum OCTET STRING,
|
|
rcIpxRipInterfaceInPolicy DisplayString,
|
|
rcIpxRipInterfaceOutPolicy DisplayString
|
|
}
|
|
|
|
rcIpxRipInterfaceNetNum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address. The interface to
|
|
which the policy is applied."
|
|
::= { rcIpxRipInterfaceEntry 1 }
|
|
|
|
rcIpxRipInterfaceInPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the in filter group to which this
|
|
entry refers."
|
|
::= { rcIpxRipInterfaceEntry 2 }
|
|
|
|
rcIpxRipInterfaceOutPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the out filter to which this
|
|
entry refers."
|
|
::= { rcIpxRipInterfaceEntry 3 }
|
|
|
|
|
|
rcIpxBrouterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxBrouterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of addressing information relevant to
|
|
this entity's IPX addresses. This table is used
|
|
for associating IfIndex and IPX network number."
|
|
::= { rcIpx 20 }
|
|
|
|
rcIpxBrouterEntry OBJECT-TYPE
|
|
SYNTAX RcIpxBrouterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The addressing information for one of this
|
|
entity's IP addresses."
|
|
INDEX { rcIpxBrouterPortIndex, rcIpxBrouterNetAddr,
|
|
rcIpxBrouterVlanId, rcIpxBrouterEncap }
|
|
::= { rcIpxBrouterTable 1 }
|
|
|
|
RcIpxBrouterEntry ::=
|
|
SEQUENCE {
|
|
rcIpxBrouterPortIndex Integer32,
|
|
rcIpxBrouterVlanId RcVlanIdOrNone,
|
|
rcIpxBrouterNetAddr OCTET STRING,
|
|
rcIpxBrouterEncap INTEGER,
|
|
rcIpxBrouterMacOffset INTEGER,
|
|
rcIpxBrouterTicks INTEGER,
|
|
rcIpxBrouterRowStatus RowStatus
|
|
}
|
|
|
|
rcIpxBrouterPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
same value of ifIndex."
|
|
::= { rcIpxBrouterEntry 1 }
|
|
|
|
rcIpxBrouterVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
sam2 value of ifIndex."
|
|
::= { rcIpxBrouterEntry 2 }
|
|
|
|
rcIpxBrouterNetAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address."
|
|
::= { rcIpxBrouterEntry 3 }
|
|
|
|
rcIpxBrouterEncap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
ethernetii(1),
|
|
snap(2),
|
|
llc(3),
|
|
raw(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Specify IPX encapsulation format. It is relevent
|
|
if the VLAN is port based. But it's always nice to have it."
|
|
DEFVAL { none }
|
|
::= { rcIpxBrouterEntry 4 }
|
|
|
|
rcIpxBrouterMacOffset OBJECT-TYPE
|
|
SYNTAX INTEGER (0..507)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address."
|
|
::= { rcIpxBrouterEntry 5 }
|
|
|
|
rcIpxBrouterTicks OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The tick value gets updated to the routing
|
|
table when an ipx address is being assigned
|
|
to a vlan."
|
|
DEFVAL { 1 }
|
|
::= { rcIpxBrouterEntry 6 }
|
|
|
|
rcIpxBrouterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcIpxBrouterEntry."
|
|
::= { rcIpxBrouterEntry 7 }
|
|
|
|
|
|
rcIpxRsmlt OBJECT IDENTIFIER ::= { rcIpx 21 }
|
|
|
|
rcIpxRsmltGlobal OBJECT IDENTIFIER ::= { rcIpxRsmlt 1 }
|
|
|
|
rcIpxRsmltGlobalTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt table size."
|
|
::= { rcIpxRsmltGlobal 1 }
|
|
|
|
rcIpxRsmltOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxRsmltOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Table"
|
|
::= { rcIpxRsmlt 2 }
|
|
|
|
rcIpxRsmltOperEntry OBJECT-TYPE
|
|
SYNTAX RcIpxRsmltOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip As Path Access List Table."
|
|
INDEX { rcIpxRsmltOperVlanId }
|
|
::= { rcIpxRsmltOperTable 1 }
|
|
|
|
RcIpxRsmltOperEntry ::=
|
|
SEQUENCE {
|
|
rcIpxRsmltOperVlanId INTEGER,
|
|
rcIpxRsmltOperIfIndex InterfaceIndex,
|
|
rcIpxRsmltOperAdminStatus TruthValue,
|
|
rcIpxRsmltOperHoldDownTimer INTEGER,
|
|
rcIpxRsmltOperHoldDownTimeRemaining INTEGER,
|
|
rcIpxRsmltOperHoldUpTimer INTEGER,
|
|
rcIpxRsmltOperHoldUpTimeRemaining INTEGER,
|
|
rcIpxRsmltOperOperStatus INTEGER,
|
|
rcIpxRsmltOperSmltId IdList,
|
|
rcIpxRsmltOperSltId IdList,
|
|
rcIpxRsmltOperMacAddr MacAddress,
|
|
rcIpxRsmltOperRowStatus RowStatus
|
|
}
|
|
|
|
rcIpxRsmltOperVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4093)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan id."
|
|
::= { rcIpxRsmltOperEntry 1 }
|
|
|
|
rcIpxRsmltOperIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Oper IfIndex."
|
|
::= { rcIpxRsmltOperEntry 2 }
|
|
|
|
rcIpxRsmltOperAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "is a enable/disable flag."
|
|
DEFVAL { false }
|
|
::= { rcIpxRsmltOperEntry 3 }
|
|
|
|
rcIpxRsmltOperHoldDownTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Timer value, the range of value is from 0 to 3600."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxRsmltOperEntry 4 }
|
|
|
|
rcIpxRsmltOperHoldDownTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldDownTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxRsmltOperEntry 5 }
|
|
|
|
rcIpxRsmltOperHoldUpTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600 | 9999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means
|
|
infinity."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxRsmltOperEntry 6 }
|
|
|
|
rcIpxRsmltOperHoldUpTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600 | 9999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldUpTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxRsmltOperEntry 7 }
|
|
|
|
rcIpxRsmltOperOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operation status of Rsmlt, up or down."
|
|
DEFVAL { down }
|
|
::= { rcIpxRsmltOperEntry 8 }
|
|
|
|
rcIpxRsmltOperSmltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SMLT is 1-32."
|
|
::= { rcIpxRsmltOperEntry 9 }
|
|
|
|
rcIpxRsmltOperSltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SLT is 1-512."
|
|
::= { rcIpxRsmltOperEntry 10 }
|
|
|
|
rcIpxRsmltOperRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row Status."
|
|
::= { rcIpxRsmltOperEntry 11 }
|
|
|
|
rcIpxRsmltOperMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac Address."
|
|
::= { rcIpxRsmltOperEntry 12 }
|
|
|
|
|
|
-- Route Smlt Peer Table
|
|
|
|
rcIpxRsmltPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpxRsmltPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Table"
|
|
::= { rcIpxRsmlt 3 }
|
|
|
|
rcIpxRsmltPeerEntry OBJECT-TYPE
|
|
SYNTAX RcIpxRsmltPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of Ip As Path Access List Table."
|
|
INDEX { rcIpxRsmltPeerVlanId }
|
|
::= { rcIpxRsmltPeerTable 1 }
|
|
|
|
RcIpxRsmltPeerEntry ::=
|
|
SEQUENCE {
|
|
rcIpxRsmltPeerVlanId INTEGER,
|
|
rcIpxRsmltPeerIfIndex InterfaceIndex,
|
|
rcIpxRsmltPeerAdminStatus TruthValue,
|
|
rcIpxRsmltPeerHoldDownTimer INTEGER,
|
|
rcIpxRsmltPeerHoldDownTimeRemaining INTEGER,
|
|
rcIpxRsmltPeerHoldUpTimer INTEGER,
|
|
rcIpxRsmltPeerHoldUpTimeRemaining INTEGER,
|
|
rcIpxRsmltPeerOperStatus INTEGER,
|
|
rcIpxRsmltPeerSmltId IdList,
|
|
rcIpxRsmltPeerSltId IdList,
|
|
rcIpxRsmltPeerMacAddr MacAddress
|
|
}
|
|
|
|
rcIpxRsmltPeerVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4093)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan id."
|
|
::= { rcIpxRsmltPeerEntry 1 }
|
|
|
|
rcIpxRsmltPeerIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Route Smlt Oper IfIndex."
|
|
::= { rcIpxRsmltPeerEntry 2 }
|
|
|
|
rcIpxRsmltPeerAdminStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "is a enable/disable flag."
|
|
::= { rcIpxRsmltPeerEntry 3 }
|
|
|
|
rcIpxRsmltPeerHoldDownTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timer value, the range of value is from 0 to 3600."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxRsmltPeerEntry 4 }
|
|
|
|
rcIpxRsmltPeerHoldDownTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldDownTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxRsmltPeerEntry 5 }
|
|
|
|
rcIpxRsmltPeerHoldUpTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600 | 9999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means
|
|
infinity."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxRsmltPeerEntry 6 }
|
|
|
|
rcIpxRsmltPeerHoldUpTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3600 | 9999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time value that indicate how much time
|
|
remaining of HoldUpTimer."
|
|
DEFVAL { 0 }
|
|
::= { rcIpxRsmltPeerEntry 7 }
|
|
|
|
rcIpxRsmltPeerOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operation status of Rsmlt, up or down."
|
|
DEFVAL { down }
|
|
::= { rcIpxRsmltPeerEntry 8 }
|
|
|
|
rcIpxRsmltPeerSmltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SMLT is 1-32."
|
|
::= { rcIpxRsmltPeerEntry 9 }
|
|
|
|
rcIpxRsmltPeerSltId OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The id range for SLT is 1-512."
|
|
::= { rcIpxRsmltPeerEntry 10 }
|
|
|
|
rcIpxRsmltPeerMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac Address."
|
|
::= { rcIpxRsmltPeerEntry 11 }
|
|
|
|
|
|
rcIpxRipGlobal OBJECT IDENTIFIER ::= { rcIpx 22 }
|
|
|
|
rcIpxRipGlobalPace OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The maximum pace, in packets per second, at
|
|
which RIP packets may be sent on this circuit."
|
|
::= { rcIpxRipGlobal 1 }
|
|
|
|
rcIpxRipGlobalUpdate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The RIP periodic update interval, in seconds."
|
|
DEFVAL { 60 }
|
|
::= { rcIpxRipGlobal 2 }
|
|
|
|
rcIpxRipGlobalAgeMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The holding multiplier for information received
|
|
in RIP periodic updates."
|
|
DEFVAL { 3 }
|
|
::= { rcIpxRipGlobal 3 }
|
|
|
|
|
|
-- RCIPX
|
|
|
|
|
|
-- POS PPP IPX Table
|
|
|
|
rcPosPppIpxTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPosPppIpxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPos 1 }
|
|
|
|
rcPosPppIpxEntry OBJECT-TYPE
|
|
SYNTAX RcPosPppIpxEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcPosPppIpxIfIndex }
|
|
::= { rcPosPppIpxTable 1 }
|
|
|
|
RcPosPppIpxEntry ::=
|
|
SEQUENCE {
|
|
rcPosPppIpxIfIndex InterfaceIndex,
|
|
rcPosPppIpxIpxcpAdminStatus INTEGER,
|
|
rcPosPppIpxOperStatus INTEGER,
|
|
rcPosPppIpxNetAddr OCTET STRING,
|
|
rcPosPppIpxRoutingProtocol INTEGER
|
|
}
|
|
|
|
rcPosPppIpxIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port number."
|
|
::= { rcPosPppIpxEntry 1 }
|
|
|
|
rcPosPppIpxIpxcpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open(1),
|
|
close(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { close }
|
|
::= { rcPosPppIpxEntry 2 }
|
|
|
|
rcPosPppIpxOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosPppIpxEntry 3 }
|
|
|
|
rcPosPppIpxNetAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IPX Network address."
|
|
::= { rcPosPppIpxEntry 4 }
|
|
|
|
rcPosPppIpxRoutingProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
rip(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { none }
|
|
::= { rcPosPppIpxEntry 5 }
|
|
|
|
-- POS SONET Table
|
|
|
|
rcPosSonetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPosSonetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPos 2 }
|
|
|
|
rcPosSonetEntry OBJECT-TYPE
|
|
SYNTAX RcPosSonetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcPosSonetIndex }
|
|
::= { rcPosSonetTable 1 }
|
|
|
|
RcPosSonetEntry ::=
|
|
SEQUENCE {
|
|
rcPosSonetIndex InterfaceIndex,
|
|
rcPosSonetFraming INTEGER,
|
|
rcPosSonetSectionTrace INTEGER,
|
|
rcPosSonetSectionGrowth INTEGER,
|
|
rcPosSonetSyncronization INTEGER,
|
|
rcPosSonetStsPathTrace OCTET STRING,
|
|
rcPosSonetPathSignalLabel INTEGER,
|
|
rcPosSonetClockSource INTEGER,
|
|
rcPosSonetScramble EnableValue,
|
|
rcPosSonetOperStatusFraming Integer32,
|
|
rcPosSonetOperStatusClockSource Integer32,
|
|
rcPosSonetOperStatusScramble EnableValue,
|
|
rcPosSonetOperStatusSectionTrace Integer32,
|
|
rcPosSonetOperStatusPathSignalLabel Integer32
|
|
|
|
}
|
|
|
|
rcPosSonetIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pos ifIndex."
|
|
::= { rcPosSonetEntry 1 }
|
|
|
|
rcPosSonetFraming OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonet(1),
|
|
sdh(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSonetEntry 2 }
|
|
|
|
rcPosSonetSectionTrace OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config. J0 byte"
|
|
::= { rcPosSonetEntry 3 }
|
|
|
|
rcPosSonetSectionGrowth OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config. Z0 byte"
|
|
::= { rcPosSonetEntry 4 }
|
|
|
|
rcPosSonetSyncronization OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config. S1 byte"
|
|
::= { rcPosSonetEntry 5 }
|
|
|
|
rcPosSonetStsPathTrace OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config. 64/16 byte."
|
|
::= { rcPosSonetEntry 6 }
|
|
|
|
rcPosSonetPathSignalLabel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config. C2 byte"
|
|
::= { rcPosSonetEntry 7 }
|
|
|
|
rcPosSonetClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
line(1),
|
|
internal(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSonetEntry 8 }
|
|
|
|
rcPosSonetScramble OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSonetEntry 9 }
|
|
|
|
rcPosSonetOperStatusFraming OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSonetEntry 10 }
|
|
|
|
rcPosSonetOperStatusClockSource OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSonetEntry 11 }
|
|
|
|
|
|
rcPosSonetOperStatusScramble OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSonetEntry 12 }
|
|
|
|
rcPosSonetOperStatusSectionTrace OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSonetEntry 13 }
|
|
|
|
rcPosSonetOperStatusPathSignalLabel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSonetEntry 14 }
|
|
|
|
|
|
|
|
-- Pos Line Status Table
|
|
|
|
rcPosLineStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPosLineStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pos Line Status Table"
|
|
::= { rcPos 3 }
|
|
|
|
rcPosLineStatusEntry OBJECT-TYPE
|
|
SYNTAX RcPosLineStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Pos Line Status."
|
|
INDEX { rcPosLineStatusIndex }
|
|
::= { rcPosLineStatusTable 1 }
|
|
|
|
RcPosLineStatusEntry ::= SEQUENCE {
|
|
rcPosLineStatusIndex InterfaceIndex,
|
|
rcPosLineStatusLocalMACAddress MacAddress,
|
|
rcPosLineStatusRemoteMACAddress MacAddress,
|
|
rcPosLineStatusLocalIpAddr IpAddress,
|
|
rcPosLineStatusRemoteIpAddr IpAddress,
|
|
rcPosLineStatusOutQuality Integer32,
|
|
rcPosLineStatusLocalPeriod Integer32,
|
|
rcPosLineStatusDeviceType Integer32,
|
|
rcPosLineStatusDeviceRev Integer32,
|
|
rcPosLineStatusIpxRoutingProtocol Integer32
|
|
}
|
|
|
|
rcPosLineStatusIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pos ifIndex, same as rcPosPppIpxIfIndex."
|
|
::= { rcPosLineStatusEntry 1 }
|
|
|
|
rcPosLineStatusLocalMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "current local MAC address"
|
|
::= { rcPosLineStatusEntry 2 }
|
|
|
|
rcPosLineStatusRemoteMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "current remote MAC address"
|
|
::= { rcPosLineStatusEntry 3 }
|
|
|
|
rcPosLineStatusLocalIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "current local ip addr"
|
|
::= { rcPosLineStatusEntry 4 }
|
|
|
|
rcPosLineStatusRemoteIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "current remote ip addr"
|
|
::= { rcPosLineStatusEntry 5 }
|
|
|
|
rcPosLineStatusOutQuality OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "current output quality."
|
|
::= { rcPosLineStatusEntry 6 }
|
|
|
|
rcPosLineStatusLocalPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosLineStatusEntry 7 }
|
|
|
|
rcPosLineStatusDeviceType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosLineStatusEntry 8 }
|
|
|
|
rcPosLineStatusDeviceRev OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosLineStatusEntry 9 }
|
|
|
|
rcPosLineStatusIpxRoutingProtocol OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosLineStatusEntry 10 }
|
|
|
|
|
|
-- Pos Line Config Table
|
|
|
|
rcPosLineConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPosLineConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pos Line Config Table"
|
|
::= { rcPos 4 }
|
|
|
|
rcPosLineConfigEntry OBJECT-TYPE
|
|
SYNTAX RcPosLineConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Pos Line Config."
|
|
INDEX { rcPosLineConfigIndex }
|
|
::= { rcPosLineConfigTable 1 }
|
|
|
|
RcPosLineConfigEntry ::= SEQUENCE {
|
|
rcPosLineConfigIndex InterfaceIndex,
|
|
rcPosLineConfigLocalMACAddress MacAddress,
|
|
rcPosLineConfigRemoteMACAddress MacAddress,
|
|
rcPosLineConfigLocalIpAddr IpAddress,
|
|
rcPosLineConfigRemoteIpAddr IpAddress,
|
|
rcPosLineConfigRemoteReportPeriod INTEGER,
|
|
rcPosLineConfigLqrThreshold INTEGER,
|
|
rcPosLineConfigOutQuality Integer32,
|
|
rcPosLineConfigPppStp EnableValue,
|
|
rcPosLineConfigLoopBack TruthValue,
|
|
rcPosLineConfigIpxVlanMacAddress MacAddress,
|
|
rcPosLineConfigIpxRemoteMacAddress MacAddress
|
|
}
|
|
|
|
rcPosLineConfigIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pos ifIndex, same as rcPosPppIpxIfIndex."
|
|
::= { rcPosLineConfigEntry 1 }
|
|
|
|
rcPosLineConfigLocalMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "current local MAC address"
|
|
::= { rcPosLineConfigEntry 2 }
|
|
|
|
rcPosLineConfigRemoteMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "current remote MAC address"
|
|
::= { rcPosLineConfigEntry 3 }
|
|
|
|
rcPosLineConfigLocalIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "current local ip addr"
|
|
::= { rcPosLineConfigEntry 4 }
|
|
|
|
rcPosLineConfigRemoteIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "current remote ip addr"
|
|
::= { rcPosLineConfigEntry 5 }
|
|
|
|
rcPosLineConfigRemoteReportPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config. remote report period."
|
|
::= { rcPosLineConfigEntry 6 }
|
|
|
|
rcPosLineConfigLqrThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config. input quality."
|
|
::= { rcPosLineConfigEntry 7 }
|
|
|
|
rcPosLineConfigOutQuality OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config. output quality."
|
|
::= { rcPosLineConfigEntry 8 }
|
|
|
|
rcPosLineConfigPppStp OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "STP PPP encoding enable T/F"
|
|
::= { rcPosLineConfigEntry 9 }
|
|
|
|
rcPosLineConfigLoopBack OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "perform loop-back."
|
|
::= { rcPosLineConfigEntry 10 }
|
|
|
|
rcPosLineConfigIpxVlanMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosLineConfigEntry 11 }
|
|
|
|
rcPosLineConfigIpxRemoteMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosLineConfigEntry 12 }
|
|
|
|
|
|
-- POS Sonet traps --
|
|
|
|
rcPosSonetTrap OBJECT IDENTIFIER ::= { rcPos 5 }
|
|
|
|
rcPosSonetTrapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sectionAlarm(1),
|
|
lineAlarm(2),
|
|
pathAlarm(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate a particular type of Sonet
|
|
trap."
|
|
::= { rcPosSonetTrap 1 }
|
|
|
|
rcPosSonetTrapIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noDefect(1),
|
|
sectionLossOfSignal(2),
|
|
sectionLossOfFrame(3),
|
|
lineAlarmIndication(4),
|
|
lineRemoteDefectIndication(5),
|
|
pathLossOfPointer(6),
|
|
pathAlarmIndication(7),
|
|
pathRemoteDefectIndication(8),
|
|
pathUnequipped(9),
|
|
pathSignalLabelMismatch(10),
|
|
pathTraceMismatch(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate an indication for a Sonet trap."
|
|
::= { rcPosSonetTrap 2 }
|
|
|
|
-- Pos Sio Card Config Table
|
|
|
|
rcPosSioCardConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPosSioCardConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pos Sio Card Config Table"
|
|
::= { rcPos 6 }
|
|
|
|
rcPosSioCardConfigEntry OBJECT-TYPE
|
|
SYNTAX RcPosSioCardConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Pos Sio Card Config."
|
|
INDEX { rcPosSioCardConfigSlotIndex }
|
|
::= { rcPosSioCardConfigTable 1 }
|
|
|
|
RcPosSioCardConfigEntry ::= SEQUENCE {
|
|
rcPosSioCardConfigSlotIndex Integer32,
|
|
rcPosSioCardConfigAction INTEGER,
|
|
rcPosSioCardConfigTraceMode INTEGER,
|
|
rcPosSioCardConfigImageFileName DisplayString
|
|
}
|
|
|
|
rcPosSioCardConfigSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot Index."
|
|
::= { rcPosSioCardConfigEntry 1 }
|
|
|
|
rcPosSioCardConfigAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
reset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSioCardConfigEntry 2 }
|
|
|
|
rcPosSioCardConfigTraceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
traceOn(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosSioCardConfigEntry 3 }
|
|
|
|
rcPosSioCardConfigImageFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "POS Image file name."
|
|
::= { rcPosSioCardConfigEntry 4 }
|
|
|
|
|
|
|
|
-- POS Operation Status Table
|
|
|
|
rcPosOperStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPosOperStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPos 7 }
|
|
|
|
rcPosOperStatusEntry OBJECT-TYPE
|
|
SYNTAX RcPosOperStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcPosOperStatusIndex }
|
|
::= { rcPosOperStatusTable 1 }
|
|
|
|
RcPosOperStatusEntry ::=
|
|
SEQUENCE {
|
|
rcPosOperStatusIndex InterfaceIndex,
|
|
rcPosOperStatusLqrStatus Integer32,
|
|
rcPosOperStatusLineLqrThreshold Integer32,
|
|
rcPosOperStatusLinkMagicNumber Integer32,
|
|
rcPosOperStatusLinePppStp EnableValue
|
|
}
|
|
|
|
rcPosOperStatusIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pos ifIndex."
|
|
::= { rcPosOperStatusEntry 1 }
|
|
|
|
rcPosOperStatusLqrStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status of pppLqrConfigStatus."
|
|
::= { rcPosOperStatusEntry 2 }
|
|
|
|
rcPosOperStatusLineLqrThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { rcPosOperStatusEntry 3 }
|
|
|
|
rcPosOperStatusLinkMagicNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { rcPosOperStatusEntry 4 }
|
|
|
|
rcPosOperStatusLinePppStp OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcPosOperStatusEntry 5 }
|
|
|
|
|
|
-- Link Flap Detect Group
|
|
|
|
rcLinkFlapDetectAutoPortDownEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable the Link Flap Detect
|
|
feature. When enabled this feature will monitor
|
|
the number of times a port goes down during a
|
|
certain interval. If the number exceeds a given
|
|
bound the port will be forced out-of-service."
|
|
::= { rcLinkFlapDetect 1 }
|
|
|
|
rcLinkFlapDetectSendTrap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure whether a trap should be
|
|
sent if the port is forced out-of-service."
|
|
::= { rcLinkFlapDetect 2 }
|
|
|
|
rcLinkFlapDetectFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER (1..9999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the number of times the port
|
|
can go down."
|
|
::= { rcLinkFlapDetect 3 }
|
|
|
|
rcLinkFlapDetectInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (2..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the interval (in minutes)."
|
|
::= { rcLinkFlapDetect 4 }
|
|
|
|
|
|
-- Radius Group
|
|
-- Radius Global Infomation
|
|
|
|
rcRadiusGlobal OBJECT IDENTIFIER ::= { rcRadius 1 }
|
|
|
|
rcRadiusGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable this feature."
|
|
DEFVAL { false }
|
|
::= { rcRadiusGlobal 1 }
|
|
|
|
rcRadiusGlobalMaxNumberServer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of RADIUS servers."
|
|
DEFVAL { 10 }
|
|
::= { rcRadiusGlobal 2 }
|
|
|
|
rcRadiusGlobalAttributeValue OBJECT-TYPE
|
|
SYNTAX INTEGER (192..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value for Access-Priority attribute."
|
|
DEFVAL { 192 }
|
|
::= { rcRadiusGlobal 3 }
|
|
|
|
rcRadiusGlobalServerTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of entries in the
|
|
rcRadiusServerTable."
|
|
::= { rcRadiusGlobal 4 }
|
|
|
|
rcRadiusGlobalAcctEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Radius Accounting feature."
|
|
DEFVAL { false }
|
|
::= { rcRadiusGlobal 5 }
|
|
|
|
rcRadiusGlobalAcctAttributeValue OBJECT-TYPE
|
|
SYNTAX INTEGER (192..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value for User-Command attribute."
|
|
DEFVAL { 193 }
|
|
::= { rcRadiusGlobal 6 }
|
|
|
|
rcRadiusGlobalAcctIncludeCli OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Include/Exclude cli-commands in radius
|
|
acccounting updates."
|
|
DEFVAL { false }
|
|
::= { rcRadiusGlobal 7 }
|
|
|
|
rcRadiusGlobalClearStat OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear Radius Statistic for all servers
|
|
configured."
|
|
DEFVAL { false }
|
|
::= { rcRadiusGlobal 8 }
|
|
|
|
rcRadiusGlobalMcastAttributeValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value for multicast address vendor
|
|
specific attribute."
|
|
DEFVAL { 90 }
|
|
::= { rcRadiusGlobal 9 }
|
|
|
|
rcRadiusGlobalAuthInfoAttributeValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value for Auth-Info vendor specific attribute."
|
|
DEFVAL { 91 }
|
|
::= { rcRadiusGlobal 10 }
|
|
|
|
rcRadiusGlobalCommandAccess OBJECT-TYPE
|
|
SYNTAX INTEGER (192..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value for Command-Access attribute."
|
|
DEFVAL { 194 }
|
|
::= { rcRadiusGlobal 11 }
|
|
|
|
rcRadiusGlobalCliCommands OBJECT-TYPE
|
|
SYNTAX INTEGER (192..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value for Cli-Command attribute."
|
|
DEFVAL { 195 }
|
|
::= { rcRadiusGlobal 12 }
|
|
|
|
rcRadiusGlobalIgapLogFSize OBJECT-TYPE
|
|
SYNTAX INTEGER (50..8192)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum size for the IGAP accounting time-out
|
|
log file in KB."
|
|
DEFVAL { 512 }
|
|
::= { rcRadiusGlobal 13 }
|
|
|
|
rcRadiusGlobalCliProfEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Radius CLI Profiling."
|
|
DEFVAL { false }
|
|
::= { rcRadiusGlobal 14 }
|
|
|
|
rcRadiusGlobalAuthInvalidServerAddress OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Access Responses from unknown or
|
|
invalid Radius servers."
|
|
::= { rcRadiusGlobal 15 }
|
|
|
|
rcRadiusGlobalSourceIpFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to include configured IP address as source
|
|
address in RADIUS packets."
|
|
DEFVAL { false }
|
|
::= { rcRadiusGlobal 16 }
|
|
|
|
rcRadiusGlobalIgapPasswdAttr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
standard(1),
|
|
authinfo(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this variable is set to standard(1), password in
|
|
IGAP join request is sent in standard RADIUS password
|
|
attribute. When set to authinfo(2), the password is
|
|
encoded in Auth-Info attribute."
|
|
DEFVAL { standard }
|
|
::= { rcRadiusGlobal 17 }
|
|
|
|
rcRadiusGlobalCliCmdCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..40)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value for Cli-Command-count."
|
|
DEFVAL { 40 }
|
|
::= { rcRadiusGlobal 18 }
|
|
rcRadiusReachabilityUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The username used for the RADIUS server reachability useDummyRadiusRequests option."
|
|
DEFVAL { "avaya" }
|
|
::= { rcRadiusGlobal 21 }
|
|
|
|
rcRadiusReachabilityPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The password used for the RADIUS server reachability useDummyRadiusRequests option."
|
|
DEFVAL { "avaya" }
|
|
::= { rcRadiusGlobal 22 }
|
|
|
|
rcRadiusReachabilityUnreachableTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (30..600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the interval between checks when the RADIUS server is unreachable."
|
|
DEFVAL { 60 }
|
|
::= { rcRadiusGlobal 23 }
|
|
|
|
rcRadiusReachabilityKeepAliveTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (30..600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the interval between checks when the RADIUS server is reachable."
|
|
DEFVAL { 180 }
|
|
::= { rcRadiusGlobal 24 }
|
|
|
|
rcRadiusSupportedVendorIds OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the supported radius vendor ids."
|
|
DEFVAL { "562,1584" }
|
|
::= { rcRadiusGlobal 25 }
|
|
|
|
-- Radius Server Table Infomation
|
|
|
|
rcRadiusServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcRadiusServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "The RADIUS table (0 to 10 entries). This
|
|
table lists the information of the RADIUS server."
|
|
::= { rcRadius 2 }
|
|
|
|
rcRadiusServerEntry OBJECT-TYPE
|
|
SYNTAX RcRadiusServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "A RADIUS server table entry."
|
|
INDEX { rcRadiusServerAddress}
|
|
::= { rcRadiusServerTable 1 }
|
|
|
|
RcRadiusServerEntry ::=
|
|
SEQUENCE {
|
|
rcRadiusServerPriority INTEGER,
|
|
rcRadiusServerAddress IpAddress,
|
|
rcRadiusServerTimeOut INTEGER,
|
|
rcRadiusServerEnable TruthValue,
|
|
rcRadiusServerMaxRetries INTEGER,
|
|
rcRadiusServerUdpPort INTEGER,
|
|
rcRadiusServerSecretKey DisplayString,
|
|
rcRadiusServerAccessRequests Counter32,
|
|
rcRadiusServerAccessAccepts Counter32,
|
|
rcRadiusServerAccessRejects Counter32,
|
|
rcRadiusServerBadResponses Counter32,
|
|
rcRadiusServerPendingRequests Counter32,
|
|
rcRadiusServerClientRetries Counter32,
|
|
rcRadiusServerRowStatus RowStatus,
|
|
rcRadiusServerAcctEnable TruthValue,
|
|
rcRadiusServerAcctUdpPort INTEGER,
|
|
rcRadiusServerAcctOnRequests Counter32,
|
|
rcRadiusServerAcctOffRequests Counter32,
|
|
rcRadiusServerAcctStartRequests Counter32,
|
|
rcRadiusServerAcctStopRequests Counter32,
|
|
rcRadiusServerAcctInterimRequests Counter32,
|
|
rcRadiusServerAcctBadResponses Counter32,
|
|
rcRadiusServerAcctPendingRequests Counter32,
|
|
rcRadiusServerAcctClientRetries Counter32
|
|
|
|
}
|
|
|
|
rcRadiusServerPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Server priority, used to control which server to choose
|
|
first to send authentication."
|
|
DEFVAL { 10 }
|
|
::= { rcRadiusServerEntry 1 }
|
|
|
|
rcRadiusServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Server IP address of the RADIUS authentication server
|
|
referred to in this table entry."
|
|
::= { rcRadiusServerEntry 2 }
|
|
|
|
rcRadiusServerTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The time interval in seconds before the client
|
|
retransmit the packet."
|
|
DEFVAL { 3 }
|
|
::= { rcRadiusServerEntry 3 }
|
|
|
|
rcRadiusServerEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable this server."
|
|
DEFVAL { true }
|
|
::= { rcRadiusServerEntry 4 }
|
|
|
|
rcRadiusServerMaxRetries OBJECT-TYPE
|
|
SYNTAX INTEGER (1..6)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Maximum number of retransmissions."
|
|
DEFVAL { 3 }
|
|
::= { rcRadiusServerEntry 5 }
|
|
|
|
rcRadiusServerUdpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65536)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The UDP port the client is using to send requests
|
|
to this server."
|
|
DEFVAL { 1812 }
|
|
::= { rcRadiusServerEntry 6 }
|
|
|
|
rcRadiusServerSecretKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The identifier of the RADIUS authentication client."
|
|
::= { rcRadiusServerEntry 7 }
|
|
|
|
rcRadiusServerAccessRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS access-response packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServerEntry 8 }
|
|
|
|
rcRadiusServerAccessAccepts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS access-accept packets (valid or
|
|
invalid) received from this server."
|
|
::= { rcRadiusServerEntry 9 }
|
|
|
|
rcRadiusServerAccessRejects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS access-reject packets (valid or
|
|
invalid) received from this server."
|
|
::= { rcRadiusServerEntry 10 }
|
|
|
|
rcRadiusServerBadResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS invalid access-response packets
|
|
received from this server."
|
|
::= { rcRadiusServerEntry 11 }
|
|
|
|
rcRadiusServerPendingRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS access-request packets destined
|
|
for this server that have not yet timed out or
|
|
received a response. This variable is incremented
|
|
when an access-request is sent and decremented due
|
|
to receipt of an access-accept, access-reject, a
|
|
timeout or retransmission."
|
|
::= { rcRadiusServerEntry 12 }
|
|
|
|
rcRadiusServerClientRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of authentication retransmission to
|
|
this server."
|
|
::= { rcRadiusServerEntry 13 }
|
|
|
|
rcRadiusServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcRadiusServerEntry 14 }
|
|
|
|
rcRadiusServerAcctEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable or disable Radius Accounting on this server."
|
|
DEFVAL { true }
|
|
::= { rcRadiusServerEntry 15 }
|
|
|
|
rcRadiusServerAcctUdpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65536)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "The UDP port the client used to send accounting
|
|
requests to this server."
|
|
DEFVAL { 1813 }
|
|
::= { rcRadiusServerEntry 16 }
|
|
|
|
rcRadiusServerAcctOnRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS accounting-on packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServerEntry 17 }
|
|
|
|
rcRadiusServerAcctOffRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS accounting-off packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServerEntry 18 }
|
|
|
|
rcRadiusServerAcctStartRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS accounting-start packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServerEntry 19 }
|
|
|
|
|
|
rcRadiusServerAcctStopRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS accounting-stop packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServerEntry 20 }
|
|
|
|
rcRadiusServerAcctInterimRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS accounting-interim packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServerEntry 21 }
|
|
|
|
rcRadiusServerAcctBadResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of Invalid responses received from this
|
|
server."
|
|
::= { rcRadiusServerEntry 22 }
|
|
|
|
rcRadiusServerAcctPendingRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS accounting packets that are waiting
|
|
be sent to this server. This variable is incremented
|
|
whenever any accounting-request is sent to this server and
|
|
decremented when an acknowledgement is received or timeout
|
|
occurs."
|
|
::= { rcRadiusServerEntry 23 }
|
|
|
|
rcRadiusServerAcctClientRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of RADIUS accounting packets retransmitted
|
|
to this server."
|
|
::= { rcRadiusServerEntry 24 }
|
|
|
|
|
|
-- Radius Serv Table
|
|
|
|
rcRadiusServTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcRadiusServEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "The RADIUS table (0 to 10 entries). This
|
|
table lists the information of the RADIUS server."
|
|
::= { rcRadius 3 }
|
|
|
|
rcRadiusServEntry OBJECT-TYPE
|
|
SYNTAX RcRadiusServEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "A RADIUS server table entry."
|
|
INDEX { rcRadiusServAddress, rcRadiusServUsedBy }
|
|
::= { rcRadiusServTable 1 }
|
|
|
|
RcRadiusServEntry ::=
|
|
SEQUENCE {
|
|
rcRadiusServPriority INTEGER,
|
|
rcRadiusServAddress IpAddress,
|
|
rcRadiusServTimeOut INTEGER,
|
|
rcRadiusServEnable TruthValue,
|
|
rcRadiusServMaxRetries INTEGER,
|
|
rcRadiusServUdpPort INTEGER,
|
|
rcRadiusServSecretKey DisplayString,
|
|
rcRadiusServAccessRequests Counter32,
|
|
rcRadiusServAccessAccepts Counter32,
|
|
rcRadiusServAccessRejects Counter32,
|
|
rcRadiusServBadResponses Counter32,
|
|
rcRadiusServPendingRequests Counter32,
|
|
rcRadiusServClientRetries Counter32,
|
|
rcRadiusServRowStatus RowStatus,
|
|
rcRadiusServAcctEnable TruthValue,
|
|
rcRadiusServAcctUdpPort INTEGER,
|
|
rcRadiusServAcctOnRequests Counter32,
|
|
rcRadiusServAcctOffRequests Counter32,
|
|
rcRadiusServAcctStartRequests Counter32,
|
|
rcRadiusServAcctStopRequests Counter32,
|
|
rcRadiusServAcctInterimRequests Counter32,
|
|
rcRadiusServAcctBadResponses Counter32,
|
|
rcRadiusServAcctPendingRequests Counter32,
|
|
rcRadiusServAcctClientRetries Counter32,
|
|
rcRadiusServUsedBy INTEGER,
|
|
rcRadiusServNasIpAddress IpAddress,
|
|
rcRadiusServRoundTripTime DisplayString,
|
|
rcRadiusServAccessChallanges Counter32,
|
|
rcRadiusServSourceIpAddr IpAddress
|
|
|
|
}
|
|
|
|
rcRadiusServPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Server priority, used to control which server to choose
|
|
first to send authentication."
|
|
DEFVAL { 10 }
|
|
::= { rcRadiusServEntry 1 }
|
|
|
|
rcRadiusServAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Server IP address of the RADIUS authentication server
|
|
referred to in this table entry."
|
|
::= { rcRadiusServEntry 2 }
|
|
|
|
rcRadiusServTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (1..20)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "The time interval in seconds before the client
|
|
retransmit the packet."
|
|
DEFVAL { 3 }
|
|
::= { rcRadiusServEntry 3 }
|
|
|
|
rcRadiusServEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Enable or disable this server."
|
|
DEFVAL { true }
|
|
::= { rcRadiusServEntry 4 }
|
|
|
|
rcRadiusServMaxRetries OBJECT-TYPE
|
|
SYNTAX INTEGER (0..6)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Maximum number of retransmissions."
|
|
DEFVAL { 1 }
|
|
::= { rcRadiusServEntry 5 }
|
|
|
|
rcRadiusServUdpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65536)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "The UDP port the client is using to send requests
|
|
to this server."
|
|
DEFVAL { 1812 }
|
|
::= { rcRadiusServEntry 6 }
|
|
|
|
rcRadiusServSecretKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "The identifier of the RADIUS authentication client."
|
|
::= { rcRadiusServEntry 7 }
|
|
|
|
rcRadiusServAccessRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS access-response packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServEntry 8 }
|
|
|
|
rcRadiusServAccessAccepts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS access-accept packets (valid or
|
|
invalid) received from this server."
|
|
::= { rcRadiusServEntry 9 }
|
|
|
|
rcRadiusServAccessRejects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS access-reject packets (valid or
|
|
invalid) received from this server."
|
|
::= { rcRadiusServEntry 10 }
|
|
|
|
rcRadiusServBadResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS invalid access-response packets
|
|
received from this server."
|
|
::= { rcRadiusServEntry 11 }
|
|
|
|
rcRadiusServPendingRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS access-request packets destined
|
|
for this server that have not yet timed out or
|
|
received a response. This variable is incremented
|
|
when an access-request is sent and decremented due
|
|
to receipt of an access-accept, access-reject, a
|
|
timeout or retransmission."
|
|
::= { rcRadiusServEntry 12 }
|
|
|
|
rcRadiusServClientRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of authentication retransmission to
|
|
this server."
|
|
::= { rcRadiusServEntry 13 }
|
|
|
|
rcRadiusServRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcRadiusServEntry 14 }
|
|
|
|
rcRadiusServAcctEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Enable or disable Radius Accounting on this server."
|
|
DEFVAL { true }
|
|
::= { rcRadiusServEntry 15 }
|
|
|
|
rcRadiusServAcctUdpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65536)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "The UDP port the client used to send accounting
|
|
requests to this server."
|
|
DEFVAL { 1813 }
|
|
::= { rcRadiusServEntry 16 }
|
|
|
|
rcRadiusServAcctOnRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS accounting-on packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServEntry 17 }
|
|
|
|
rcRadiusServAcctOffRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS accounting-off packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServEntry 18 }
|
|
|
|
rcRadiusServAcctStartRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS accounting-start packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServEntry 19 }
|
|
|
|
|
|
rcRadiusServAcctStopRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS accounting-stop packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServEntry 20 }
|
|
|
|
rcRadiusServAcctInterimRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS accounting-interim packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServEntry 21 }
|
|
|
|
rcRadiusServAcctBadResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of Invalid responses received from this
|
|
server."
|
|
::= { rcRadiusServEntry 22 }
|
|
|
|
rcRadiusServAcctPendingRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS accounting packets that are waiting
|
|
be sent to this server. This variable is incremented
|
|
whenever any accounting-request is sent to this server and
|
|
decremented when an acknowledgement is received or timeout
|
|
occurs."
|
|
::= { rcRadiusServEntry 23 }
|
|
|
|
rcRadiusServAcctClientRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS accounting packets retransmitted
|
|
to this server."
|
|
::= { rcRadiusServEntry 24 }
|
|
|
|
rcRadiusServUsedBy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cli(1),
|
|
igap(2),
|
|
snmp(3),
|
|
eap(4),
|
|
web(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "cli(1): for cli login, igap(2): for igap,snmp(3):
|
|
for snmp login, eap(4) for EAP PAE Authenticator
|
|
web(5) for web-server(http/https) login."
|
|
::= { rcRadiusServEntry 25 }
|
|
|
|
rcRadiusServNasIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "RADIUS Client NAS Identifier for this server."
|
|
::= { rcRadiusServEntry 26 }
|
|
|
|
rcRadiusServRoundTripTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Time different between the instance when
|
|
a RADIUS request is sent and the
|
|
corresponding response is received."
|
|
::= { rcRadiusServEntry 27 }
|
|
|
|
rcRadiusServAccessChallanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "The number of RADIUS access-challanges packets
|
|
sent to this server. This does not include
|
|
retransmission."
|
|
::= { rcRadiusServEntry 28 }
|
|
|
|
rcRadiusServSourceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "source IP address RADIUS packets."
|
|
::= { rcRadiusServEntry 29 }
|
|
|
|
|
|
rcRadiusGlobalSnmp OBJECT IDENTIFIER ::= { rcRadius 4 }
|
|
|
|
rcRadiusGlobalSnmpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable snmp radius authentication."
|
|
DEFVAL { false }
|
|
::= { rcRadiusGlobalSnmp 1 }
|
|
|
|
rcRadiusGlobalSnmpAcctEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Radius Accounting for SNMP."
|
|
DEFVAL { false }
|
|
::= { rcRadiusGlobalSnmp 2 }
|
|
|
|
rcRadiusGlobalSnmpReAuthenticateTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (30..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value representing Re-Authenticate
|
|
Timer in seconds. Timer to be used to Re-
|
|
Authenticate a SNMP Session."
|
|
DEFVAL { 180 }
|
|
::= { rcRadiusGlobalSnmp 3 }
|
|
|
|
rcRadiusGlobalSnmpAbortSessionTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (30..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value representing the time in seconds
|
|
after which the snmp session is considered
|
|
expired and Radius Accounting Stop message
|
|
is sent."
|
|
DEFVAL { 180 }
|
|
::= { rcRadiusGlobalSnmp 4 }
|
|
|
|
rcRadiusGlobalSnmpUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name for Radius SNMP Accounting."
|
|
::= { rcRadiusGlobalSnmp 5 }
|
|
|
|
rcRadiusEapLastRejMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to store the Last Rejected MAC
|
|
address on an EAP enabled port."
|
|
::= { rcRadiusGlobalSnmp 6 }
|
|
|
|
rcRadiusPaePortNumber OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to store the Port Number on which
|
|
the Mac Intrusion happened."
|
|
::= { rcRadiusGlobalSnmp 7 }
|
|
|
|
rcRadiusEapLastAuthMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to store the Last Authenticated MAC
|
|
address on an EAP enabled port."
|
|
::= { rcRadiusGlobalSnmp 8 }
|
|
|
|
|
|
-- EAP properietary group
|
|
-- EAP Global Info
|
|
|
|
|
|
rcEapGlobal OBJECT IDENTIFIER ::= { rcEap 1 }
|
|
|
|
rcEapGlobalRadAcctEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether EAP Sessions need to be
|
|
Accounted with a RADIUS server. When this
|
|
value is TRUE, device attempts to send
|
|
RADIUS Accounting-Start and Accounting-Stop
|
|
requests upon 802.1x user login and logoff
|
|
respectively."
|
|
::= { rcEapGlobal 1 }
|
|
|
|
rcEapGlobalClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When the value of this variable is set to
|
|
TRUE, all the EAPOL (8021x) related statistics
|
|
will be reset."
|
|
::= { rcEapGlobal 2 }
|
|
|
|
rcEapGlobalGuestVlanEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this variable is set to TRUE, EAPoL Guest Vlan
|
|
feature will be enabled globally"
|
|
DEFVAL { false }
|
|
::= { rcEapGlobal 3 }
|
|
|
|
rcEapGlobalGuestVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value representing the VLAN to be used as a Global Guest
|
|
VLAN. When corresponding value is not specified at the
|
|
port level, supplicants are granted access to the network
|
|
through this VLAN before they are authenticated."
|
|
::= { rcEapGlobal 4 }
|
|
|
|
rcEapGlobalRadAuthNonEapClients OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this variable is set to TRUE, Radius Mac
|
|
Centralization feature will be enabled globally"
|
|
DEFVAL { false }
|
|
::= { rcEapGlobal 5 }
|
|
|
|
rcEapGlobalRadDiscardFilterAgeout OBJECT-TYPE
|
|
SYNTAX Integer32 (5..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Age out period for pending non-eap-macs due to server timeout or unreachable"
|
|
DEFVAL { 10 }
|
|
::= { rcEapGlobal 6 }
|
|
|
|
rcEapGlobalNonEapRadiusPwdAttrFmt OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
ipAddr(0),
|
|
macAddr(1),
|
|
portNumber(2),
|
|
padding(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the format of the RADIUS password attribute
|
|
that is included in requests to the RADIUS server for authenticating
|
|
non-EAP clients (MAC addresses).
|
|
|
|
If the ipAddr(0) bit is set, the password attribute will contain
|
|
the switch's IP address encoded as a string of four 3-digit 0-padded
|
|
integers. For example, the encoding for the IP address 47.80.225.1
|
|
would be '047080225001'.
|
|
|
|
If the macAddr(1) bit is set, the password attribute will contain
|
|
the MAC address to be authenticated as a string of six 2-digit hex
|
|
numbers. For example, the MAC address 00:08:01:0a:33:34 would be
|
|
encoded as '0008010a3334'.
|
|
|
|
If the portNumber(2) bit is set, the password attribute will contain
|
|
the port number on which the MAC address was seen, encoded as a string
|
|
of two 2-digit 0-padded integers. The first integer is the unit/slot
|
|
number, and the second number is the port number on that unit/slot.
|
|
For a standalone unit, the unit/slot number will be 0. For
|
|
example, the encoding for unit/port 1/23 would be '0123', and the
|
|
encoding for port 7 on a standalone stackable unit would be '0007'.
|
|
|
|
If the padding(3) bit is set, then the fields in the password attribute
|
|
will be separated by a . character.
|
|
|
|
By default, all the fields bit values will be set."
|
|
::= { rcEapGlobal 10 }
|
|
|
|
rcEapGlobalNonEapRadiusPwdAttrKeyString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key string used in the password format for Non-Eap RADIUS authentication. If the key string is configured, the password attribute will be <ipaddress>.<mac-address>.<port>.<key-string>.
|
|
If No key string is configured, then the password attribute will not contain key string."
|
|
::= { rcEapGlobal 11 }
|
|
|
|
rcEapGlobalClearNonEap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When the value of this variable is set to
|
|
TRUE, all the Non-EAPOL MAC sessions on port
|
|
will be cleared. This will alawys return False."
|
|
::= { rcEapGlobal 12 }
|
|
|
|
rcEapPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcEapPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "EAP properietery table for port level commands"
|
|
::= { rcEap 2 }
|
|
|
|
rcEapPortEntry OBJECT-TYPE
|
|
SYNTAX RcEapPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing the EAP properietry configuration
|
|
information at the port level."
|
|
INDEX { rcEapPortIndex }
|
|
::= { rcEapPortTable 1 }
|
|
|
|
RcEapPortEntry ::= SEQUENCE {
|
|
rcEapPortIndex InterfaceIndex,
|
|
rcEapPortGuestVlanId INTEGER,
|
|
rcEapPortMultiHostMaxClients Integer32,
|
|
rcEapPortAllowNonEapHost TruthValue,
|
|
rcEapPortNonEapMaxClients INTEGER,
|
|
rcEapPortStatus INTEGER,
|
|
rcEapPortEapMaxClients Integer32,
|
|
rcEapPortMultiHostSingleAuthEnabled TruthValue,
|
|
rcEapPortFailOpenVlanId Integer32
|
|
}
|
|
|
|
rcEapPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { rcEapPortEntry 1 }
|
|
|
|
rcEapPortGuestVlanEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this variable is set to TRUE, EAPoL Guest Vlan
|
|
feature will be enabled on the port"
|
|
DEFVAL { false }
|
|
::= { rcEapPortEntry 2 }
|
|
|
|
rcEapPortGuestVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value representing the VLAN to be used as a Guest
|
|
VLAN. Access for unautheticated host/s connected to this port
|
|
is provided through this VLAN. A value of 0 indicates
|
|
that guest VLAN functionality is not enabled for this port."
|
|
DEFVAL { 0 }
|
|
::= { rcEapPortEntry 3 }
|
|
|
|
rcEapPortMultiHostEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this variable is set to TRUE, the system is enabled to
|
|
have multiple 802.1X supplicants authenticated from the same
|
|
port"
|
|
DEFVAL { false }
|
|
::= { rcEapPortEntry 4 }
|
|
|
|
rcEapPortMultiHostMaxClients OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Integer value representing the maximum number of supplicants
|
|
that are allowed to get authenticated on the port. This is
|
|
applicable in MHMV mode."
|
|
DEFVAL { 1 }
|
|
::= { rcEapPortEntry 5 }
|
|
|
|
rcEapPortMultiHostMaxClients OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value representing the maximum number of supplicants
|
|
that are allowed to get authenticated on the port. This is
|
|
applicable rcEapPortMultiHostEnable is set to TRUE."
|
|
DEFVAL { 1 }
|
|
::= { rcEapPortEntry 5 }
|
|
|
|
rcEapPortAllowNonEapHost OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this variable is set to TRUE, the system is enabled to
|
|
allow hosts that do not participate in 802.1X authentication
|
|
to get network access."
|
|
DEFVAL { false }
|
|
::= { rcEapPortEntry 6 }
|
|
|
|
rcEapPortNonEapMaxClients OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Integer value representing the maximum number of non-802.1X
|
|
hosts that are allowed to connect to the port. A value of 0
|
|
indicates that non-802.1X authentication is disabled
|
|
on this port"
|
|
DEFVAL { 1 }
|
|
::= { rcEapPortEntry 7 }
|
|
|
|
rcEapPortRadAuthNonEapClients OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this variable is set to TRUE, the system is enabled to
|
|
allow Non-Eap hosts on the port to get network access through radius
|
|
based Mac authorization."
|
|
DEFVAL { false }
|
|
::= { rcEapPortEntry 8 }
|
|
|
|
rcEapPortShutDownOnIntrusion OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When this variable is set to TRUE, the port is
|
|
shutdown on encountering [max + 1st] non-eap client
|
|
on the port"
|
|
DEFVAL { false }
|
|
::= { rcEapPortEntry 9 }
|
|
|
|
rcEapPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(2),
|
|
forceAuthorized(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows enabling EAPoL on the port.
|
|
If status is auto(2), EAPoL is enabled and based on the 802.1x
|
|
authentication, traffic is allowed.
|
|
If status is forceAuthorized(3), EAPoL is disabled on the port and
|
|
the port allows all traffic irrespective of 802.1x authentication."
|
|
::= { rcEapPortEntry 10 }
|
|
|
|
rcEapPortEapMaxClients OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the maximum number of EAP-authentication
|
|
MAC addresses allowed on this port. A value of 0 indicates that
|
|
802.1X authentication is disabled on this port."
|
|
DEFVAL { 1 }
|
|
::= { rcEapPortEntry 11 }
|
|
|
|
rcEapPortMultiHostSingleAuthEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object controls whether non-EAP clients (MAC addresses) may
|
|
be automatically authenticated on the port after one client
|
|
has been authenticated (known as MHSA). "
|
|
DEFVAL { false }
|
|
::= { rcEapPortEntry 12 }
|
|
|
|
rcEapPortFailOpenVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object specifies the ID of the Fail-Open VLAN for this port.
|
|
Authenticated devices are moved into the configured Fail Open VLAN
|
|
when the switch declares the RADIUS servers unreachable.
|
|
A value of 0 indicates Fail Open VLAN functionality
|
|
is not enabled for this port."
|
|
DEFVAL { 0 }
|
|
::= { rcEapPortEntry 16 }
|
|
|
|
rcEapPortAllowedMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcEapPortAllowedMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "EAP properietery table for allowed mac addresses of non
|
|
EAP clients"
|
|
::= { rcEap 3 }
|
|
|
|
rcEapPortAllowedMacEntry OBJECT-TYPE
|
|
SYNTAX RcEapPortAllowedMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing MAC addresses for Non EAP hosts allowed
|
|
on the port"
|
|
INDEX { rcEapPortAllowedMacPort, rcEapPortAllowedMacAddr }
|
|
::= { rcEapPortAllowedMacTable 1 }
|
|
|
|
RcEapPortAllowedMacEntry ::= SEQUENCE {
|
|
rcEapPortAllowedMacPort InterfaceIndex,
|
|
rcEapPortAllowedMacAddr MacAddress,
|
|
rcEapPortAllowedMacRowStatus RowStatus
|
|
}
|
|
|
|
rcEapPortAllowedMacPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { rcEapPortAllowedMacEntry 1 }
|
|
|
|
rcEapPortAllowedMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "MAC address of a non EAP host that is granted access
|
|
on the port."
|
|
::= { rcEapPortAllowedMacEntry 2 }
|
|
|
|
rcEapPortAllowedMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in rcEapPortAllowedMacTable."
|
|
::= { rcEapPortAllowedMacEntry 3 }
|
|
|
|
rcEapMultiHostStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcEapMultiHostStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to control the EAP multihost configuration
|
|
for each port in the system."
|
|
::= { rcEap 4 }
|
|
|
|
rcEapMultiHostStatusEntry OBJECT-TYPE
|
|
SYNTAX RcEapMultiHostStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The EAP multihost configuration for a port."
|
|
INDEX { rcEapMultiHostStatusPortNumber,
|
|
rcEapMultiHostStatusClientMACAddr }
|
|
::= { rcEapMultiHostStatusTable 1 }
|
|
|
|
RcEapMultiHostStatusEntry ::= SEQUENCE {
|
|
rcEapMultiHostStatusPortNumber InterfaceIndex,
|
|
rcEapMultiHostStatusClientMACAddr MacAddress,
|
|
rcEapMultiHostStatusPaeState INTEGER,
|
|
rcEapMultiHostStatusBackendAuthState INTEGER,
|
|
rcEapMultiHostStatusVlanId INTEGER
|
|
}
|
|
|
|
rcEapMultiHostStatusPortNumber OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Port number associated with this client."
|
|
::= { rcEapMultiHostStatusEntry 1 }
|
|
|
|
rcEapMultiHostStatusClientMACAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of the client."
|
|
::= { rcEapMultiHostStatusEntry 2 }
|
|
|
|
rcEapMultiHostStatusPaeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initialize(1),
|
|
disconnected(2),
|
|
connecting(3),
|
|
authenticating(4),
|
|
authenticated(5),
|
|
aborting(6),
|
|
held(7),
|
|
forceAuth(8),
|
|
forceUnauth(9),
|
|
unauthenticated(10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current value of the Authenticator PAE state machine."
|
|
::= { rcEapMultiHostStatusEntry 3 }
|
|
|
|
rcEapMultiHostStatusBackendAuthState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
request(1),
|
|
response(2),
|
|
success(3),
|
|
fail(4),
|
|
timeout(5),
|
|
idle(6),
|
|
initialize(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current state of the Backend Authentication state
|
|
machine."
|
|
::= { rcEapMultiHostStatusEntry 4 }
|
|
|
|
rcEapMultiHostStatusVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan-Id associated with this client MAC. This Vlan
|
|
could be port-based Vlan or Radius assigned Vlan."
|
|
::= { rcEapMultiHostStatusEntry 5 }
|
|
|
|
rcEapMultiHostSessionStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcEapMultiHostSessionStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table that contains the session statistics objects for the
|
|
Authenticator PAE associated with each EAP client on each
|
|
Port.An entry appears in this table for each client MAC address
|
|
on each port that may authenticate access to itself."
|
|
::= { rcEap 5 }
|
|
|
|
rcEapMultiHostSessionStatsEntry OBJECT-TYPE
|
|
SYNTAX RcEapMultiHostSessionStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The session statistics information for an Authenticator
|
|
PAE. This shows the current values being collected for
|
|
each session that is still in progress, or the final
|
|
values for the last valid session for each client where
|
|
there is no session currently active."
|
|
INDEX { rcEapMultiHostSessionStatsPortNumber,
|
|
rcEapMultiHostSessionStatsClientMACAddr }
|
|
::= { rcEapMultiHostSessionStatsTable 1 }
|
|
|
|
RcEapMultiHostSessionStatsEntry ::= SEQUENCE {
|
|
rcEapMultiHostSessionStatsPortNumber InterfaceIndex,
|
|
rcEapMultiHostSessionStatsClientMACAddr MacAddress,
|
|
rcEapMultiHostSessionId SnmpAdminString,
|
|
rcEapMultiHostSessionAuthenticMethod INTEGER,
|
|
rcEapMultiHostSessionTime TimeTicks,
|
|
rcEapMultiHostSessionTerminateCause INTEGER,
|
|
rcEapMultiHostSessionUserName SnmpAdminString
|
|
}
|
|
|
|
rcEapMultiHostSessionStatsPortNumber OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Port number associated with this client."
|
|
::= { rcEapMultiHostSessionStatsEntry 1 }
|
|
|
|
rcEapMultiHostSessionStatsClientMACAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of this client."
|
|
::= { rcEapMultiHostSessionStatsEntry 2 }
|
|
|
|
rcEapMultiHostSessionId OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A unique identifier for the session, in the
|
|
form of a printable ASCII string of at least
|
|
three characters."
|
|
::= { rcEapMultiHostSessionStatsEntry 3 }
|
|
|
|
rcEapMultiHostSessionAuthenticMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
remoteAuthServer(1),
|
|
localAuthServer(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The authentication method used to establish the session."
|
|
::= { rcEapMultiHostSessionStatsEntry 4 }
|
|
|
|
rcEapMultiHostSessionTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The duration of the session in seconds."
|
|
::= { rcEapMultiHostSessionStatsEntry 5 }
|
|
|
|
rcEapMultiHostSessionTerminateCause OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supplicantLogoff(1),
|
|
portFailure(2),
|
|
supplicantRestart(3),
|
|
reauthFailed(4),
|
|
authControlForceUnauth(5),
|
|
portReInit(6),
|
|
portAdminDisabled(7),
|
|
notTerminatedYet(999)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The reason for the session termination."
|
|
::= { rcEapMultiHostSessionStatsEntry 6 }
|
|
|
|
rcEapMultiHostSessionUserName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The User-Name representing the identity of the Supplicant
|
|
PAE."
|
|
::= { rcEapMultiHostSessionStatsEntry 7 }
|
|
|
|
rcEapPortRadiusMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcEapPortRadiusMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "EAP proprietary table for non-EAP hosts
|
|
authenticated using radius server."
|
|
::= { rcEap 6 }
|
|
|
|
rcEapPortRadiusMacEntry OBJECT-TYPE
|
|
SYNTAX RcEapPortRadiusMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing MAC addresses for Non EAP hosts
|
|
authenticated using radius server."
|
|
INDEX { rcEapPortRadiusMacPort, rcEapPortRadiusMacAddr }
|
|
::= { rcEapPortRadiusMacTable 1 }
|
|
|
|
RcEapPortRadiusMacEntry ::= SEQUENCE {
|
|
rcEapPortRadiusMacPort InterfaceIndex,
|
|
rcEapPortRadiusMacAddr MacAddress,
|
|
rcEapPortRadiusMacStatus INTEGER,
|
|
rcEapPortRadiusVlanId INTEGER,
|
|
rcEapPortRadiusMacClear TruthValue
|
|
}
|
|
rcEapPortRadiusMacPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port."
|
|
::= { rcEapPortRadiusMacEntry 1 }
|
|
|
|
rcEapPortRadiusMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "MAC address of a non EAP host that is authenticated
|
|
using radius server."
|
|
::= { rcEapPortRadiusMacEntry 2 }
|
|
|
|
rcEapPortRadiusMacStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
authenticated(1),
|
|
rejected(2),
|
|
pending(3),
|
|
radius-request-dropped(4),
|
|
radius-server-not-reachable(5),
|
|
held(6),
|
|
authenticating(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Authentication status of the non EAP host that is
|
|
authenticated using radius server."
|
|
::= {rcEapPortRadiusMacEntry 3 }
|
|
|
|
rcEapPortRadiusVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan-Id associated with this Non-EAP client MAC. This Vlan
|
|
could be port-based Vlan or Radius assigned vlan."
|
|
::= { rcEapPortRadiusMacEntry 4 }
|
|
|
|
rcEapPortRadiusMacClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clears the Non-EAP MAC entry associated with this Index.
|
|
The value should be set to true to clear the Non-EAP MAC entry.
|
|
This MIB always return false."
|
|
DEFVAL { false }
|
|
::= { rcEapPortRadiusMacEntry 5 }
|
|
|
|
-- Radius Serv Host Table
|
|
|
|
rcRadiusServHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcRadiusServHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The RADIUS Server Host table (0 to 10 entries). This
|
|
table lists the information of the RADIUS server."
|
|
::= { rcRadius 5 }
|
|
|
|
rcRadiusServHostEntry OBJECT-TYPE
|
|
SYNTAX RcRadiusServHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A RADIUS server table entry."
|
|
INDEX { rcRadiusServHostAddressType, rcRadiusServHostAddress, rcRadiusServHostUsedBy }
|
|
::= { rcRadiusServHostTable 1 }
|
|
|
|
RcRadiusServHostEntry ::=
|
|
SEQUENCE {
|
|
rcRadiusServHostAddressType InetAddressType,
|
|
rcRadiusServHostAddress InetAddress,
|
|
rcRadiusServHostUsedBy INTEGER,
|
|
rcRadiusServHostPriority Integer32,
|
|
rcRadiusServHostTimeOut Integer32,
|
|
rcRadiusServHostEnable TruthValue,
|
|
rcRadiusServHostMaxRetries Integer32,
|
|
rcRadiusServHostUdpPort Integer32,
|
|
rcRadiusServHostSecretKey DisplayString,
|
|
rcRadiusServHostAccessRequests Counter32,
|
|
rcRadiusServHostAccessAccepts Counter32,
|
|
rcRadiusServHostAccessRejects Counter32,
|
|
rcRadiusServHostBadResponses Counter32,
|
|
rcRadiusServHostPendingRequests Counter32,
|
|
rcRadiusServHostClientRetries Counter32,
|
|
rcRadiusServHostRowStatus RowStatus,
|
|
rcRadiusServHostAcctEnable TruthValue,
|
|
rcRadiusServHostAcctUdpPort Integer32,
|
|
rcRadiusServHostAcctOnRequests Counter32,
|
|
rcRadiusServHostAcctOffRequests Counter32,
|
|
rcRadiusServHostAcctStartRequests Counter32,
|
|
rcRadiusServHostAcctStopRequests Counter32,
|
|
rcRadiusServHostAcctInterimRequests Counter32,
|
|
rcRadiusServHostAcctBadResponses Counter32,
|
|
rcRadiusServHostAcctPendingRequests Counter32,
|
|
rcRadiusServHostAcctClientRetries Counter32,
|
|
rcRadiusServHostNasIpAddress InetAddress,
|
|
rcRadiusServHostRoundTripTime DisplayString,
|
|
rcRadiusServHostAccessChallanges Counter32,
|
|
rcRadiusServHostSourceIpAddr InetAddress
|
|
}
|
|
|
|
rcRadiusServHostAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Inet Address Type of radius server host address."
|
|
::= { rcRadiusServHostEntry 1 }
|
|
|
|
rcRadiusServHostAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Server IP address of the RADIUS authentication server
|
|
referred to in this table entry."
|
|
::= { rcRadiusServHostEntry 2 }
|
|
|
|
rcRadiusServHostUsedBy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cli(1),
|
|
snmp(3),
|
|
eap(4),
|
|
web(5)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "cli(1): for cli login, igap(2): for igap,snmp(3):
|
|
for snmp login, eap(4) for EAP PAE Authenticator
|
|
web(5) for web-server(http/https) login.
|
|
IGAP is not supported on the VSP 9000."
|
|
::= { rcRadiusServHostEntry 3 }
|
|
|
|
rcRadiusServHostPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Server priority, used to control which server to choose
|
|
first to send authentication."
|
|
DEFVAL { 10 }
|
|
::= { rcRadiusServHostEntry 4 }
|
|
|
|
rcRadiusServHostTimeOut OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The time interval in seconds before the client
|
|
retransmit the packet."
|
|
DEFVAL { 3 }
|
|
::= { rcRadiusServHostEntry 5 }
|
|
|
|
rcRadiusServHostEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable this server."
|
|
DEFVAL { true }
|
|
::= { rcRadiusServHostEntry 6 }
|
|
|
|
rcRadiusServHostMaxRetries OBJECT-TYPE
|
|
SYNTAX Integer32 (0..6)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of retransmissions."
|
|
DEFVAL { 1 }
|
|
::= { rcRadiusServHostEntry 7 }
|
|
|
|
rcRadiusServHostUdpPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65536)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The UDP port the client is using to send requests
|
|
to this server."
|
|
DEFVAL { 1812 }
|
|
::= { rcRadiusServHostEntry 8 }
|
|
|
|
rcRadiusServHostSecretKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The identifier of the RADIUS authentication client."
|
|
::= { rcRadiusServHostEntry 9 }
|
|
|
|
rcRadiusServHostAccessRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-response packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServHostEntry 10 }
|
|
|
|
rcRadiusServHostAccessAccepts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-accept packets (valid or
|
|
invalid) received from this server."
|
|
::= { rcRadiusServHostEntry 11 }
|
|
|
|
rcRadiusServHostAccessRejects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-reject packets (valid or
|
|
invalid) received from this server."
|
|
::= { rcRadiusServHostEntry 12 }
|
|
|
|
rcRadiusServHostBadResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS invalid access-response packets
|
|
received from this server."
|
|
::= { rcRadiusServHostEntry 13 }
|
|
|
|
rcRadiusServHostPendingRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-request packets destined
|
|
for this server that have not yet timed out or
|
|
received a response. This variable is incremented
|
|
when an access-request is sent and decremented due
|
|
to receipt of an access-accept, access-reject, a
|
|
timeout or retransmission."
|
|
::= { rcRadiusServHostEntry 14 }
|
|
|
|
rcRadiusServHostClientRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of authentication retransmission to
|
|
this server."
|
|
::= { rcRadiusServHostEntry 15 }
|
|
|
|
rcRadiusServHostRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcRadiusServHostEntry 16 }
|
|
|
|
rcRadiusServHostAcctEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Radius Accounting on this server."
|
|
DEFVAL { true }
|
|
::= { rcRadiusServHostEntry 17 }
|
|
|
|
rcRadiusServHostAcctUdpPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65536)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The UDP port the client used to send accounting
|
|
requests to this server."
|
|
DEFVAL { 1813 }
|
|
::= { rcRadiusServHostEntry 18 }
|
|
|
|
rcRadiusServHostAcctOnRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-on packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServHostEntry 19 }
|
|
|
|
rcRadiusServHostAcctOffRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-off packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServHostEntry 20 }
|
|
|
|
rcRadiusServHostAcctStartRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-start packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServHostEntry 21 }
|
|
|
|
|
|
rcRadiusServHostAcctStopRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-stop packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServHostEntry 22 }
|
|
|
|
rcRadiusServHostAcctInterimRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting-interim packets sent to
|
|
this server. This does not include retransmissions."
|
|
::= { rcRadiusServHostEntry 23 }
|
|
|
|
rcRadiusServHostAcctBadResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Invalid responses received from this
|
|
server."
|
|
::= { rcRadiusServHostEntry 24 }
|
|
|
|
rcRadiusServHostAcctPendingRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting packets that are waiting
|
|
be sent to this server. This variable is incremented
|
|
whenever any accounting-request is sent to this server and
|
|
decremented when an acknowledgement is received or timeout
|
|
occurs."
|
|
::= { rcRadiusServHostEntry 25 }
|
|
|
|
rcRadiusServHostAcctClientRetries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS accounting packets retransmitted
|
|
to this server."
|
|
::= { rcRadiusServHostEntry 26 }
|
|
|
|
rcRadiusServHostNasIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RADIUS Client NAS Identifier for this server."
|
|
::= { rcRadiusServHostEntry 27 }
|
|
|
|
rcRadiusServHostRoundTripTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time different between the instance when
|
|
a RADIUS request is sent and the
|
|
corresponding response is received."
|
|
::= { rcRadiusServHostEntry 28 }
|
|
|
|
rcRadiusServHostAccessChallanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of RADIUS access-challanges packets
|
|
sent to this server. This does not include
|
|
retransmission."
|
|
::= { rcRadiusServHostEntry 29 }
|
|
|
|
rcRadiusServHostSourceIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "source IP address RADIUS packets."
|
|
::= { rcRadiusServHostEntry 30 }
|
|
|
|
|
|
-- --------------------------------------------------
|
|
-- rcTacacsGlobal Group
|
|
-- --------------------------------------------------
|
|
|
|
rcTacacsGlobal OBJECT IDENTIFIER ::= { rcTacacs 1 }
|
|
|
|
rcTacacsGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable this feature."
|
|
DEFVAL { false }
|
|
::= { rcTacacsGlobal 1 }
|
|
|
|
rcTacacsGlobalLastUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The last user for which authentication was attempted using TACACS+."
|
|
::= { rcTacacsGlobal 2 }
|
|
|
|
rcTacacsGlobalLastAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of address for the TACACS+ server that was most recently accessed"
|
|
::= { rcTacacsGlobal 3 }
|
|
|
|
rcTacacsGlobalLastAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address of the TACACS+ server that was most recently accessed"
|
|
::= { rcTacacsGlobal 4 }
|
|
|
|
rcTacacsAccounting OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
cli(0),
|
|
ppp(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Determines which application will be accounted by tacacs+."
|
|
DEFVAL { {} }
|
|
::= { rcTacacsGlobal 5 }
|
|
|
|
rcTacacsAuthentication OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
cli(0),
|
|
ppp(1),
|
|
web(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Determines which application will be authenticated by tacacs+."
|
|
DEFVAL { {cli} }
|
|
::= { rcTacacsGlobal 6 }
|
|
|
|
rcTacacsNncliCommandAuthorizationEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object controls whether TACACS+ will be used for
|
|
authorization of individual NNCLI commands."
|
|
DEFVAL { false }
|
|
::= { rcTacacsGlobal 7 }
|
|
|
|
rcTacacsNncliCommandAuthorizationLevels OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
level0(0),
|
|
level1(1),
|
|
level2(2),
|
|
level3(3),
|
|
level4(4),
|
|
level5(5),
|
|
level6(6),
|
|
level7(7),
|
|
level8(8),
|
|
level9(9),
|
|
level10(10),
|
|
level11(11),
|
|
level12(12),
|
|
level13(13),
|
|
level14(14),
|
|
level15(15)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object controls which NNCLI command privilege levels
|
|
will be authorized by TACACS+."
|
|
DEFVAL { { } }
|
|
::= { rcTacacsGlobal 8 }
|
|
|
|
-- --------------------------------------------------
|
|
-- rcTacacsServerTable
|
|
-- --------------------------------------------------
|
|
|
|
rcTacacsServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcTacacsServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table listing the TACACS+ servers with
|
|
which the client shares a secret."
|
|
::= { rcTacacs 2 }
|
|
|
|
rcTacacsServerEntry OBJECT-TYPE
|
|
SYNTAX RcTacacsServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) representing a TACACS+ server
|
|
with which the client shares a secret."
|
|
INDEX { rcTacacsServerAddressType, rcTacacsServerAddress }
|
|
::= { rcTacacsServerTable 1 }
|
|
|
|
RcTacacsServerEntry ::= SEQUENCE {
|
|
rcTacacsServerAddressType InetAddressType,
|
|
rcTacacsServerAddress InetAddress,
|
|
rcTacacsServerPortNumber InetPortNumber,
|
|
rcTacacsServerConnectionType INTEGER,
|
|
rcTacacsServerConnectionStatus INTEGER,
|
|
rcTacacsServerTimeout Integer32,
|
|
rcTacacsServerKey OCTET STRING,
|
|
rcTacacsServerSourceIpInterfaceEnabled TruthValue,
|
|
rcTacacsServerSourceIpInterfaceType InetAddressType,
|
|
rcTacacsServerSourceIpInterface InetAddress,
|
|
rcTacacsServerPriority Integer32,
|
|
rcTacacsServerRowStatus RowStatus
|
|
}
|
|
|
|
rcTacacsServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Specifies the type of IP address used on the Tacacs+ server."
|
|
::= { rcTacacsServerEntry 1 }
|
|
|
|
rcTacacsServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the TACACS+ server referred to in this table entry."
|
|
::= { rcTacacsServerEntry 2 }
|
|
|
|
rcTacacsServerPortNumber OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The TCP port on which the client establishes a connection to the server.
|
|
A value of 0 indicates that the system specified default value is used."
|
|
DEFVAL { 49 }
|
|
::= { rcTacacsServerEntry 3 }
|
|
|
|
rcTacacsServerConnectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
singleConnection(1),
|
|
perSessionConnection(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Specifies TCP connection type between device and TACACS+ server.
|
|
Either a single open connection between a device and server
|
|
(SingleConnection), or open/close connection per communication
|
|
session (PerSessionConnection)."
|
|
DEFVAL { perSessionConnection }
|
|
::= { rcTacacsServerEntry 4 }
|
|
|
|
rcTacacsServerConnectionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
connected(1),
|
|
notConnected(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Specifies status TCP connection type between device and TACACS+
|
|
server."
|
|
::= { rcTacacsServerEntry 5 }
|
|
|
|
rcTacacsServerTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (10..30)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The maximum time (in seconds) to wait for this TACACS+ server to reply."
|
|
DEFVAL { 10 }
|
|
::= { rcTacacsServerEntry 6 }
|
|
|
|
rcTacacsServerKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Secret key to be shared with this TACACS+ server.
|
|
If the key length is zero that indicates no encryption is being used."
|
|
DEFVAL { ''H }
|
|
::= { rcTacacsServerEntry 7 }
|
|
|
|
rcTacacsServerSourceIpInterfaceEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Specifies whether source address specification is enabled."
|
|
DEFVAL { false }
|
|
::= { rcTacacsServerEntry 8 }
|
|
|
|
rcTacacsServerSourceIpInterfaceType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Specifies the type of IP address used on the interface that
|
|
connects to the Tacacs+ server. If this value is unknown(0),
|
|
then a system-wide default value will be used."
|
|
DEFVAL { unknown }
|
|
::= { rcTacacsServerEntry 9 }
|
|
|
|
rcTacacsServerSourceIpInterface OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address of the interface to use with this server."
|
|
DEFVAL { ''H }
|
|
::= { rcTacacsServerEntry 10 }
|
|
|
|
rcTacacsServerPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Determines the order in which the TACACS+ servers will be used,
|
|
when 1 is the highest priority. If more than one server share
|
|
the same priority - they will be used in lexicographic order
|
|
(the order of entries in this table)."
|
|
DEFVAL { 1 }
|
|
::= { rcTacacsServerEntry 11 }
|
|
|
|
rcTacacsServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The row status variable, can be set to destroy or createAndGo."
|
|
::= { rcTacacsServerEntry 12 }
|
|
|
|
--------------------------------------------------------------------
|
|
-- rcASGGlobal Group
|
|
--------------------------------------------------------------------
|
|
|
|
rcASGGlobal OBJECT IDENTIFIER ::= { rcASG 1 }
|
|
|
|
rcASGGlobalEnableStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display ASG enable/disable status"
|
|
::= { rcASGGlobal 1 }
|
|
|
|
rcASGGlobalAccountsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcASGGlobalAccountsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Display ASG supported service login usernames and their permission levels"
|
|
::= { rcASGGlobal 2 }
|
|
|
|
rcASGGlobalAccountsEntry OBJECT-TYPE
|
|
SYNTAX RcASGGlobalAccountsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains an entry of rcASGGlobalAccountsEntry which has username and persmission levels"
|
|
INDEX { rcASGGlobalAccountsAccessLevel }
|
|
::= { rcASGGlobalAccountsTable 1 }
|
|
|
|
RcASGGlobalAccountsEntry ::= SEQUENCE {
|
|
rcASGGlobalAccountsUsername DisplayString,
|
|
rcASGGlobalAccountsAccessLevel INTEGER
|
|
}
|
|
|
|
rcASGGlobalAccountsUsername OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ASG supported username"
|
|
::= { rcASGGlobalAccountsEntry 1 }
|
|
|
|
rcASGGlobalAccountsAccessLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rwa(1),
|
|
rw(2),
|
|
l1(3),
|
|
l2(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "permission level of the username"
|
|
::= { rcASGGlobalAccountsEntry 2 }
|
|
|
|
rcASGGlobalAFHeader OBJECT IDENTIFIER ::= { rcASG 2 }
|
|
|
|
rcASGGlobalAFHeaderAFID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display lacfile/AF AF_ID"
|
|
::= { rcASGGlobalAFHeader 1 }
|
|
|
|
rcASGGlobalAFHeaderProduct OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display lacfile/AF product name"
|
|
::= { rcASGGlobalAFHeader 2 }
|
|
|
|
rcASGGlobalAFHeaderDateAndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display lacfile/AF generated date and time"
|
|
::= { rcASGGlobalAFHeader 3 }
|
|
|
|
rcASGGlobalAFHeaderRelease OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display lacfile/AF release version"
|
|
::= { rcASGGlobalAFHeader 4 }
|
|
|
|
-- IGMP
|
|
|
|
rcIgmpInterfaceExtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpInterfaceExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 1 }
|
|
|
|
rcIgmpInterfaceExtnEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpInterfaceExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpInterfaceExtnIfIndex }
|
|
::= { rcIgmpInterfaceExtnTable 1 }
|
|
|
|
RcIgmpInterfaceExtnEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpInterfaceExtnIfIndex InterfaceIndex,
|
|
rcIgmpInterfaceExtnSnoopEnable TruthValue,
|
|
rcIgmpInterfaceExtnProxySnoopEnable TruthValue,
|
|
rcIgmpInterfaceExtnMaxAdvertiseInterval INTEGER,
|
|
rcIgmpInterfaceExtnMinAdvertiseInterval INTEGER,
|
|
rcIgmpInterfaceExtnMaxInitialAdvertiseInterval Integer32,
|
|
rcIgmpInterfaceExtnMaxInitialAdvertments Integer32,
|
|
rcIgmpInterfaceExtnNeighborDeadInterval Integer32,
|
|
rcIgmpInterfaceExtnFastLeaveEnable TruthValue,
|
|
rcIgmpInterfaceExtnFastLeavePortMembers PortSet,
|
|
rcIgmpInterfaceExtnMrdiscEnable TruthValue,
|
|
rcIgmpInterfaceExtnDiscoveredRouterPorts PortSet,
|
|
rcIgmpInterfaceExtnSnoopMRouterPorts PortSet,
|
|
rcIgmpInterfaceExtnSnoopActiveMRouterPorts PortSet,
|
|
rcIgmpInterfaceExtnSnoopMRouterExpiration Integer32,
|
|
rcIgmpInterfaceExtnFlushAction INTEGER,
|
|
rcIgmpInterfaceExtnRouterAlertEnable EnableValue,
|
|
rcIgmpInterfaceExtnSsmEnable TruthValue,
|
|
rcIgmpInterfaceExtnIgapEnable EnableValue,
|
|
rcIgmpInterfaceExtnAccntEnable EnableValue,
|
|
rcIgmpInterfaceExtnAuthEnable EnableValue,
|
|
rcIgmpInterfaceExtnStreamLimitEnable EnableValue,
|
|
rcIgmpInterfaceExtnMaxStreams Integer32,
|
|
rcIgmpInterfaceExtnNumStreams Integer32,
|
|
rcIgmpInterfaceExtnNewQuerier IpAddress,
|
|
rcIgmpInterfaceExtnSnoopQuerierEnable TruthValue,
|
|
rcIgmpInterfaceExtnSnoopQuerierAddr IpAddress,
|
|
rcIgmpInterfaceExtnMvrEnable TruthValue,
|
|
rcIgmpInterfaceExtnMvrProxyEnable TruthValue,
|
|
rcIgmpInterfaceExtnDynamicDowngradeEnable TruthValue,
|
|
rcIgmpInterfaceExtnCompatibilityModeEnable TruthValue,
|
|
rcIgmpInterfaceExtnOperVersion INTEGER,
|
|
rcIgmpInterfaceExtnExplicitHostTrackingEnable TruthValue,
|
|
rcIgmpInterfaceExtnMcastMode INTEGER,
|
|
rcIgmpInterfaceExtnSnoopMRouterLPorts LPortSet,
|
|
rcIgmpInterfaceExtnSnoopActiveMRouterLPorts LPortSet,
|
|
rcIgmpInterfaceExtnL2Isid Integer32
|
|
}
|
|
|
|
rcIgmpInterfaceExtnIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ifindex."
|
|
::= { rcIgmpInterfaceExtnEntry 1 }
|
|
|
|
rcIgmpInterfaceExtnSnoopEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable snoop."
|
|
::= { rcIgmpInterfaceExtnEntry 2 }
|
|
|
|
rcIgmpInterfaceExtnProxySnoopEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable proxy snoop."
|
|
::= { rcIgmpInterfaceExtnEntry 3 }
|
|
|
|
rcIgmpInterfaceExtnMaxAdvertiseInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(2..180)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { 20 }
|
|
::= { rcIgmpInterfaceExtnEntry 4 }
|
|
|
|
rcIgmpInterfaceExtnMinAdvertiseInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(3..180)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { 15 }
|
|
::= { rcIgmpInterfaceExtnEntry 5 }
|
|
|
|
rcIgmpInterfaceExtnMaxInitialAdvertiseInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { 2 }
|
|
::= { rcIgmpInterfaceExtnEntry 6 }
|
|
|
|
rcIgmpInterfaceExtnMaxInitialAdvertments OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { 3 }
|
|
::= { rcIgmpInterfaceExtnEntry 7 }
|
|
|
|
rcIgmpInterfaceExtnNeighborDeadInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
DEFVAL { 60 }
|
|
::= { rcIgmpInterfaceExtnEntry 8 }
|
|
|
|
rcIgmpInterfaceExtnFastLeaveEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable fast leave on this interface."
|
|
DEFVAL { false }
|
|
::= { rcIgmpInterfaceExtnEntry 9 }
|
|
|
|
rcIgmpInterfaceExtnFastLeavePortMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are enabled for fast leave."
|
|
::= { rcIgmpInterfaceExtnEntry 10 }
|
|
|
|
rcIgmpInterfaceExtnMrdiscEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable multicast router discovery."
|
|
::= { rcIgmpInterfaceExtnEntry 11 }
|
|
|
|
rcIgmpInterfaceExtnDiscoveredRouterPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "list of ports that discovered by
|
|
IGMP Multicast router discovery
|
|
(MRDISC) protocol."
|
|
::= { rcIgmpInterfaceExtnEntry 12 }
|
|
|
|
rcIgmpInterfaceExtnSnoopMRouterPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of ports in this interface that provide
|
|
connectivity to an IP Multicast router."
|
|
::= { rcIgmpInterfaceExtnEntry 13 }
|
|
|
|
rcIgmpInterfaceExtnSnoopActiveMRouterPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Active ports."
|
|
::= { rcIgmpInterfaceExtnEntry 14 }
|
|
|
|
rcIgmpInterfaceExtnSnoopMRouterExpiration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Multicast querier router aging time out."
|
|
::= { rcIgmpInterfaceExtnEntry 15 }
|
|
|
|
rcIgmpInterfaceExtnFlushAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
flushGrpMember(2),
|
|
flushMrouter(3),
|
|
flushSender(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IGMP flush action."
|
|
::= { rcIgmpInterfaceExtnEntry 16 }
|
|
|
|
rcIgmpInterfaceExtnRouterAlertEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable Router Alert Check."
|
|
::= { rcIgmpInterfaceExtnEntry 17 }
|
|
|
|
rcIgmpInterfaceExtnSsmEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable SSM."
|
|
::= { rcIgmpInterfaceExtnEntry 18 }
|
|
|
|
rcIgmpInterfaceExtnIgapEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable/disable IGAP."
|
|
DEFVAL { enable }
|
|
::= { rcIgmpInterfaceExtnEntry 19 }
|
|
|
|
rcIgmpInterfaceExtnAccntEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable/disable accounting."
|
|
DEFVAL { enable }
|
|
::= { rcIgmpInterfaceExtnEntry 20 }
|
|
|
|
rcIgmpInterfaceExtnAuthEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable/disable authentication."
|
|
DEFVAL { enable }
|
|
::= { rcIgmpInterfaceExtnEntry 21 }
|
|
|
|
rcIgmpInterfaceExtnStreamLimitEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Stream Limitation enable/disable."
|
|
DEFVAL { enable }
|
|
::= { rcIgmpInterfaceExtnEntry 22 }
|
|
|
|
rcIgmpInterfaceExtnMaxStreams OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of stream."
|
|
DEFVAL { 4 }
|
|
::= { rcIgmpInterfaceExtnEntry 23 }
|
|
|
|
rcIgmpInterfaceExtnNumStreams OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current number of streams."
|
|
::= { rcIgmpInterfaceExtnEntry 24 }
|
|
|
|
rcIgmpInterfaceExtnNewQuerier OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address of the New IGMP Querier on
|
|
the IP subnet to which this interface is
|
|
attached."
|
|
::= { rcIgmpInterfaceExtnEntry 25 }
|
|
|
|
rcIgmpInterfaceExtnSnoopQuerierEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable snoop querier."
|
|
::= { rcIgmpInterfaceExtnEntry 26 }
|
|
|
|
rcIgmpInterfaceExtnSnoopQuerierAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The pseudo address of the IGMP Snoop Querier."
|
|
::= { rcIgmpInterfaceExtnEntry 27 }
|
|
|
|
rcIgmpInterfaceExtnMvrEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable mcast-vlan-registration on a vlan, it
|
|
is used to specified a vlan works as a mcast-vlan,
|
|
maximum 16 mcast-vlan is supported."
|
|
::= { rcIgmpInterfaceExtnEntry 28 }
|
|
|
|
rcIgmpInterfaceExtnMvrProxyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable or disable mcast-vlan-registration proxy on a vlan,
|
|
you must enable mcast-vlan-registration at first."
|
|
::= { rcIgmpInterfaceExtnEntry 29 }
|
|
|
|
rcIgmpInterfaceExtnDynamicDowngradeEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable dynamic downgrade the IGMP version when older version query message was received."
|
|
DEFVAL { true }
|
|
::= { rcIgmpInterfaceExtnEntry 30 }
|
|
|
|
rcIgmpInterfaceExtnCompatibilityModeEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable v2 v3 compatible mode, which will handle the IGMP v2 message in v3 interface"
|
|
DEFVAL { false }
|
|
::= { rcIgmpInterfaceExtnEntry 31 }
|
|
|
|
rcIgmpInterfaceExtnOperVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
version1(1),
|
|
version2(2),
|
|
version3(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operational version of IGMP which is running on this interface."
|
|
::= { rcIgmpInterfaceExtnEntry 32 }
|
|
|
|
rcIgmpInterfaceExtnExplicitHostTrackingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable the IGMP protocol running in version 3 to track hosts per channels/groups."
|
|
DEFVAL { false }
|
|
::= { rcIgmpInterfaceExtnEntry 33 }
|
|
|
|
rcIgmpInterfaceExtnMcastMode OBJECT-TYPE
|
|
SYNTAX INTEGER { snoop(1), pim(2), snoopSpb(3), routedSpb(4), dvmrp(5), none(6), pimgwSpb(7)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IGMP interface mode"
|
|
DEFVAL { none }
|
|
::= { rcIgmpInterfaceExtnEntry 34 }
|
|
|
|
rcIgmpInterfaceExtnSnoopMRouterLPorts OBJECT-TYPE
|
|
SYNTAX LPortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of logical ports (for example, WLAN tunnels)
|
|
in this interface that provide connectivity to an IP
|
|
Multicast router."
|
|
::= { rcIgmpInterfaceExtnEntry 35 }
|
|
|
|
rcIgmpInterfaceExtnSnoopActiveMRouterLPorts OBJECT-TYPE
|
|
SYNTAX LPortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Active logical ports (for example, WLAN tunnels)."
|
|
::= { rcIgmpInterfaceExtnEntry 36 }
|
|
|
|
rcIgmpInterfaceExtnL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2 ISID of the cvlan."
|
|
::= { rcIgmpInterfaceExtnEntry 37 }
|
|
|
|
-- IGMP Static
|
|
|
|
rcIgmpStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 2 }
|
|
|
|
rcIgmpStaticEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpStaticIfIndex, rcIgmpStaticGrpAddr }
|
|
::= { rcIgmpStaticTable 1 }
|
|
|
|
RcIgmpStaticEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpStaticIfIndex InterfaceIndex,
|
|
rcIgmpStaticGrpAddr IpAddress,
|
|
rcIgmpStaticMemberPorts PortSet,
|
|
rcIgmpStaticNotAllowedToJoin PortSet,
|
|
rcIgmpStaticRowStatus RowStatus,
|
|
rcIgmpStaticToGrpAddr IpAddress
|
|
}
|
|
|
|
rcIgmpStaticIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ifindex"
|
|
::= { rcIgmpStaticEntry 1 }
|
|
|
|
rcIgmpStaticGrpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip multicast address. The GrpAddress holds the starting
|
|
range for the address range. If the ToGrpAddress is not
|
|
entered, the it is as good as entering a single address."
|
|
::= { rcIgmpStaticEntry 2 }
|
|
|
|
rcIgmpStaticMemberPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "egressing ports."
|
|
::= { rcIgmpStaticEntry 3 }
|
|
|
|
rcIgmpStaticNotAllowedToJoin OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "not allowed to join."
|
|
::= { rcIgmpStaticEntry 4 }
|
|
|
|
rcIgmpStaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcIgmpStaticEntry."
|
|
::= { rcIgmpStaticEntry 5 }
|
|
|
|
rcIgmpStaticToGrpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To hold the range for the GrpAddress."
|
|
::= { rcIgmpStaticEntry 6 }
|
|
|
|
-- IGMP Access
|
|
|
|
rcIgmpAccessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 3 }
|
|
|
|
rcIgmpAccessEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpAccessIfIndex, rcIgmpAccessGrpAddr,
|
|
rcIgmpAccessHostAddr, rcIgmpAccessHostMask }
|
|
::= { rcIgmpAccessTable 1 }
|
|
|
|
RcIgmpAccessEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpAccessIfIndex InterfaceIndex,
|
|
rcIgmpAccessGrpAddr IpAddress,
|
|
rcIgmpAccessHostAddr IpAddress,
|
|
rcIgmpAccessMode INTEGER,
|
|
rcIgmpAccessRowStatus RowStatus,
|
|
rcIgmpAccessHostMask IpAddress
|
|
}
|
|
|
|
rcIgmpAccessIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ifindex"
|
|
::= { rcIgmpAccessEntry 1 }
|
|
|
|
rcIgmpAccessGrpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ip multicast addr."
|
|
::= { rcIgmpAccessEntry 2 }
|
|
|
|
rcIgmpAccessHostAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "host addr."
|
|
::= { rcIgmpAccessEntry 3 }
|
|
|
|
rcIgmpAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
denyTX(1),
|
|
denyRX(2),
|
|
denyBOTH(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "denyTX(1), denyRX(2), denyBOTH(3)."
|
|
DEFVAL { denyBOTH }
|
|
::= { rcIgmpAccessEntry 4 }
|
|
|
|
rcIgmpAccessRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcIgmpAccessEntry."
|
|
::= { rcIgmpAccessEntry 5 }
|
|
|
|
rcIgmpAccessHostMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "host mask."
|
|
::= { rcIgmpAccessEntry 6 }
|
|
|
|
-- IGMP Sender
|
|
|
|
rcIgmpSenderTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpSenderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 4 }
|
|
|
|
rcIgmpSenderEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpSenderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpSenderGrpAddr, rcIgmpSenderIfIndex,
|
|
rcIgmpSenderMemberAddr }
|
|
::= { rcIgmpSenderTable 1 }
|
|
|
|
RcIgmpSenderEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpSenderGrpAddr IpAddress,
|
|
rcIgmpSenderIfIndex InterfaceIndex,
|
|
rcIgmpSenderMemberAddr IpAddress,
|
|
rcIgmpSenderAction INTEGER,
|
|
rcIgmpSenderTPort Integer32,
|
|
rcIgmpSenderState INTEGER
|
|
}
|
|
|
|
rcIgmpSenderGrpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ip multicast addr."
|
|
::= { rcIgmpSenderEntry 1 }
|
|
|
|
rcIgmpSenderIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ifindex"
|
|
::= { rcIgmpSenderEntry 2 }
|
|
|
|
rcIgmpSenderMemberAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "host addr."
|
|
::= { rcIgmpSenderEntry 3 }
|
|
|
|
rcIgmpSenderAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
flushEntry(1),
|
|
flushGrp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "none(0), flushEntry(1), flushGrp(2)."
|
|
::= { rcIgmpSenderEntry 4 }
|
|
|
|
rcIgmpSenderTPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Igmp Sender Tport."
|
|
::= { rcIgmpSenderEntry 5 }
|
|
|
|
rcIgmpSenderState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filtered(1),
|
|
notfiltered(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if a sender exists because of an
|
|
IGMP access filter or not."
|
|
::= { rcIgmpSenderEntry 6 }
|
|
|
|
-- IGMP SSM
|
|
|
|
rcIgmpSsmGlobal OBJECT IDENTIFIER ::= { rcIgmp 5 }
|
|
|
|
rcIgmpSsmGlobalDynamicLearning OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable dynamic learning
|
|
or source/group pair from IGMPv3 report."
|
|
::= { rcIgmpSsmGlobal 1 }
|
|
|
|
rcIgmpSsmGlobalAdminAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
enableAll(2), -- enable all Ssm entries
|
|
disableAll(3) -- disable all Ssm entries
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the admin status of all the Ssm entries to
|
|
enable/disable at once."
|
|
::= { rcIgmpSsmGlobal 2 }
|
|
|
|
rcIgmpSsmGlobalRangeGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If multicast group address & RangeMask == RangeGroup,
|
|
then RangeGroup is in Ssm Range. Else it is not in
|
|
the range."
|
|
::= { rcIgmpSsmGlobal 3 }
|
|
|
|
rcIgmpSsmGlobalRangeMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used with RangeGroup."
|
|
::= { rcIgmpSsmGlobal 4 }
|
|
|
|
-- IGMP SSM Mapping Table - supported by VSP pre-3.2 releases
|
|
|
|
rcIgmpSsmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpSsmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 6 }
|
|
|
|
rcIgmpSsmEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpSsmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpSsmIpMulticastGrp }
|
|
::= { rcIgmpSsmTable 1 }
|
|
|
|
RcIgmpSsmEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpSsmIpMulticastGrp IpAddress,
|
|
rcIgmpSsmIpSource IpAddress,
|
|
rcIgmpSsmLearningMode INTEGER,
|
|
rcIgmpSsmActivity TruthValue,
|
|
rcIgmpSsmAdminState EnableValue,
|
|
rcIgmpSsmRowStatus RowStatus
|
|
}
|
|
|
|
rcIgmpSsmIpMulticastGrp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "This is the IP multicast group address
|
|
that has default range of 232/8.
|
|
This parameter should be configured by the user."
|
|
::= { rcIgmpSsmEntry 1 }
|
|
|
|
rcIgmpSsmIpSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "This is the Source's IP address that will
|
|
be sending traffic to the group source.
|
|
This parameter should be configured by the user."
|
|
::= { rcIgmpSsmEntry 2 }
|
|
|
|
rcIgmpSsmLearningMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "This is a read only field that provides
|
|
information if the entry is statically
|
|
configured entry (Static) or a dynamically
|
|
learned entry from IGMPv3 (Dynamic). Note
|
|
that Dynamic may not be used in the first
|
|
step of the implementation."
|
|
::= { rcIgmpSsmEntry 3 }
|
|
|
|
rcIgmpSsmActivity OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "This is a read only field. It provides
|
|
the activity on the corresponding (S,G). If
|
|
the source is active and traffic is flowing
|
|
to the switch, this field value should be
|
|
Active, otherwise it should say non-active.
|
|
This information is useful in knowing if the
|
|
group has an active source or not when the group
|
|
is joined by a member on the switch."
|
|
::= { rcIgmpSsmEntry 4 }
|
|
|
|
rcIgmpSsmAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "The admin state provides information on
|
|
whether the entry is to be used or not. If the
|
|
value of this field is Enabled (default), then
|
|
the entry can be used. If the state is Disabled,
|
|
then the entry will not be used, but will be
|
|
saved for future use."
|
|
::= { rcIgmpSsmEntry 5 }
|
|
|
|
rcIgmpSsmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcIgmpSsmEntry 6 }
|
|
|
|
-- IGMP New Access
|
|
|
|
rcIgmpNewAccessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpNewAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 7 }
|
|
|
|
rcIgmpNewAccessEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpNewAccessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpNewAccessIfIndex, rcIgmpNewAccessPrefixListId,
|
|
rcIgmpNewAccessHostAddr, rcIgmpNewAccessHostMask }
|
|
::= { rcIgmpNewAccessTable 1 }
|
|
|
|
RcIgmpNewAccessEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpNewAccessIfIndex InterfaceIndex,
|
|
rcIgmpNewAccessPrefixListId Integer32,
|
|
rcIgmpNewAccessPrefixListName DisplayString,
|
|
rcIgmpNewAccessHostAddr IpAddress,
|
|
rcIgmpNewAccessHostMask IpAddress,
|
|
rcIgmpNewAccessActionMode INTEGER,
|
|
rcIgmpNewAccessRowStatus RowStatus
|
|
}
|
|
|
|
rcIgmpNewAccessIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ifindex"
|
|
::= { rcIgmpNewAccessEntry 1 }
|
|
|
|
rcIgmpNewAccessPrefixListId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Prefix List ID."
|
|
::= { rcIgmpNewAccessEntry 2 }
|
|
|
|
rcIgmpNewAccessPrefixListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Prefix List name."
|
|
::= { rcIgmpNewAccessEntry 3 }
|
|
|
|
rcIgmpNewAccessHostAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "host addr."
|
|
::= { rcIgmpNewAccessEntry 4 }
|
|
|
|
rcIgmpNewAccessHostMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "host mask."
|
|
::= { rcIgmpNewAccessEntry 5 }
|
|
|
|
rcIgmpNewAccessActionMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
denyTX(1),
|
|
denyRX(2),
|
|
denyBOTH(3),
|
|
allowTX(4),
|
|
allowRX(5),
|
|
allowBOTH(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "action mode."
|
|
DEFVAL { denyBOTH }
|
|
::= { rcIgmpNewAccessEntry 6 }
|
|
|
|
rcIgmpNewAccessRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the rcIgmpNewAccessEntry."
|
|
::= { rcIgmpNewAccessEntry 7 }
|
|
|
|
-- rcIgmpChannelLimit Table
|
|
|
|
rcIgmpChannelLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpChannelLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 8 }
|
|
|
|
rcIgmpChannelLimitEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpChannelLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpChannelLimitIfIndex,
|
|
rcIgmpChannelLimitPort }
|
|
::= { rcIgmpChannelLimitTable 1 }
|
|
|
|
RcIgmpChannelLimitEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpChannelLimitIfIndex InterfaceIndex,
|
|
rcIgmpChannelLimitPort Integer32,
|
|
rcIgmpChannelLimitMaxStreams Integer32,
|
|
rcIgmpChannelLimitNumStreams Integer32,
|
|
rcIgmpChannelLimitRowStatus RowStatus
|
|
}
|
|
|
|
rcIgmpChannelLimitIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ifindex"
|
|
::= { rcIgmpChannelLimitEntry 1 }
|
|
|
|
rcIgmpChannelLimitPort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port belong to this vlan."
|
|
::= { rcIgmpChannelLimitEntry 2 }
|
|
|
|
rcIgmpChannelLimitMaxStreams OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of stream."
|
|
DEFVAL { 4 }
|
|
::= { rcIgmpChannelLimitEntry 3 }
|
|
|
|
rcIgmpChannelLimitNumStreams OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current number of streams."
|
|
::= { rcIgmpChannelLimitEntry 4 }
|
|
|
|
rcIgmpChannelLimitRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Row Status."
|
|
::= { rcIgmpChannelLimitEntry 5 }
|
|
|
|
|
|
-- rcIgmpIgapServiceAbilityCounter32 Table
|
|
|
|
rcIgmpIgapServiceAbilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpIgapServiceAbilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 9 }
|
|
|
|
rcIgmpIgapServiceAbilityEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpIgapServiceAbilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpIgapServiceAbilityIfIndex }
|
|
::= { rcIgmpIgapServiceAbilityTable 1 }
|
|
|
|
RcIgmpIgapServiceAbilityEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpIgapServiceAbilityIfIndex InterfaceIndex,
|
|
rcIgmpIgapServiceAbilityAuthSuccess Counter64,
|
|
rcIgmpIgapServiceAbilityAuthReject Counter64,
|
|
rcIgmpIgapServiceAbilityRespTimeout Counter64,
|
|
rcIgmpIgapServiceAbilityPapJoinReq Counter64,
|
|
rcIgmpIgapServiceAbilityBasicQuery Counter64,
|
|
rcIgmpIgapServiceAbilityBasicLeave Counter64,
|
|
rcIgmpIgapServiceAbilityClearStat TruthValue
|
|
}
|
|
|
|
rcIgmpIgapServiceAbilityIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ifindex"
|
|
::= { rcIgmpIgapServiceAbilityEntry 1 }
|
|
|
|
rcIgmpIgapServiceAbilityAuthSuccess OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port belong to this vlan."
|
|
::= { rcIgmpIgapServiceAbilityEntry 2 }
|
|
|
|
rcIgmpIgapServiceAbilityAuthReject OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of stream."
|
|
::= { rcIgmpIgapServiceAbilityEntry 3 }
|
|
|
|
rcIgmpIgapServiceAbilityRespTimeout OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current number of streams."
|
|
::= { rcIgmpIgapServiceAbilityEntry 4 }
|
|
|
|
rcIgmpIgapServiceAbilityPapJoinReq OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Row Status."
|
|
::= { rcIgmpIgapServiceAbilityEntry 5 }
|
|
|
|
rcIgmpIgapServiceAbilityBasicQuery OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current number of streams."
|
|
::= { rcIgmpIgapServiceAbilityEntry 6 }
|
|
|
|
rcIgmpIgapServiceAbilityBasicLeave OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Row Status."
|
|
::= { rcIgmpIgapServiceAbilityEntry 7 }
|
|
|
|
rcIgmpIgapServiceAbilityClearStat OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear Counter."
|
|
::= { rcIgmpIgapServiceAbilityEntry 8 }
|
|
|
|
|
|
rcIgmpIgapGlobal OBJECT IDENTIFIER ::= { rcIgmp 10 }
|
|
|
|
rcIgmpIgapGlobalClearAllStat OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear All IGAP Counters."
|
|
::= { rcIgmpIgapGlobal 1 }
|
|
|
|
-- IGMP Global attributes
|
|
|
|
rcIgmpGlobalParams OBJECT IDENTIFIER ::= { rcIgmp 11 }
|
|
|
|
rcIgmpFastLeaveMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0), -- none of the following
|
|
multipleUser(1), -- remove leaving member, stop traffic if no more member
|
|
oneUser(2) -- first leave stops traffic
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the fast-leave mode to be used by for all
|
|
fast-leave enabled IGMP interfaces."
|
|
DEFVAL { multipleUser }
|
|
::= { rcIgmpGlobalParams 1 }
|
|
|
|
|
|
-- IGMP Cache Extern Table
|
|
|
|
rcIgmpCacheExtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpCacheExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 12 }
|
|
|
|
rcIgmpCacheExtnEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpCacheExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { igmpCacheAddress, igmpCacheIfIndex }
|
|
::= { rcIgmpCacheExtnTable 1 }
|
|
|
|
RcIgmpCacheExtnEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpCacheExtnType INTEGER,
|
|
rcIgmpCacheExtnStaticPorts PortSet,
|
|
rcIgmpCacheExtnL2Isid Integer32
|
|
}
|
|
|
|
rcIgmpCacheExtnType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "It takes up either of the two values, dynamic
|
|
or static depending upon whether the entry is
|
|
learnt Dynamic or is added statically."
|
|
::= { rcIgmpCacheExtnEntry 1 }
|
|
|
|
rcIgmpCacheExtnStaticPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "It displays the static ports for the static joins,
|
|
this would be null for the dynamic entry."
|
|
::= { rcIgmpCacheExtnEntry 2 }
|
|
|
|
rcIgmpCacheExtnL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2 ISID of the cvlan."
|
|
::= { rcIgmpCacheExtnEntry 3 }
|
|
|
|
-- rcIgmpSnoopTrace
|
|
|
|
rcIgmpSnoopTraceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpSnoopTraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table listing the multicast groups
|
|
traversing the snoop enabled router"
|
|
::= { rcIgmp 13 }
|
|
|
|
rcIgmpSnoopTraceEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpSnoopTraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The entry listing the multicast groups
|
|
traversing the snoop enabled router"
|
|
INDEX { rcIgmpSnoopGrpAddr, rcIgmpSnoopSrcAddr, rcIgmpSnoopOutVlan}
|
|
|
|
::= { rcIgmpSnoopTraceTable 1 }
|
|
|
|
RcIgmpSnoopTraceEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpSnoopGrpAddr IpAddress,
|
|
rcIgmpSnoopSrcAddr IpAddress,
|
|
rcIgmpSnoopOutVlan InterfaceIndex,
|
|
rcIgmpSnoopInPort InterfaceIndex,
|
|
rcIgmpSnoopInVlan InterfaceIndex,
|
|
rcIgmpSnoopOutPort PortSet,
|
|
rcIgmpSnoopType INTEGER,
|
|
rcIgmpSnoopOutLPort LPortSet
|
|
}
|
|
|
|
rcIgmpSnoopGrpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ip mcast addr of grp traversing the router"
|
|
::= { rcIgmpSnoopTraceEntry 1 }
|
|
|
|
rcIgmpSnoopSrcAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip src addr of the mcast grp address"
|
|
::= { rcIgmpSnoopTraceEntry 2 }
|
|
|
|
rcIgmpSnoopOutVlan OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Egress vlan id for the mcast group"
|
|
::= { rcIgmpSnoopTraceEntry 3 }
|
|
|
|
rcIgmpSnoopInPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ingress port for the mcast grp"
|
|
::= { rcIgmpSnoopTraceEntry 4 }
|
|
|
|
rcIgmpSnoopInVlan OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ingress vlan id for the mcast source"
|
|
::= { rcIgmpSnoopTraceEntry 5 }
|
|
|
|
rcIgmpSnoopOutPort OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Egress port of the mcast grp"
|
|
::= { rcIgmpSnoopTraceEntry 6 }
|
|
|
|
rcIgmpSnoopType OBJECT-TYPE
|
|
SYNTAX INTEGER{ network(1), access(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port type on which the snoop entry is learnt"
|
|
::= { rcIgmpSnoopTraceEntry 7}
|
|
|
|
rcIgmpSnoopOutLPort OBJECT-TYPE
|
|
SYNTAX LPortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Egress logical port (for example, WLAN tunnel)
|
|
list of the mcast grp"
|
|
::= { rcIgmpSnoopTraceEntry 8 }
|
|
|
|
--New IGMP Group Table.
|
|
|
|
rcIgmpNewGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpNewGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table listing the multicast
|
|
groups configured in the device."
|
|
::= { rcIgmp 14 }
|
|
|
|
rcIgmpNewGroupEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpNewGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) representing an
|
|
Igmp group."
|
|
INDEX {rcIgmpNewGroupIpAddress, rcIgmpNewGroupMembers, rcIgmpNewGroupInPort}
|
|
::= { rcIgmpNewGroupTable 1 }
|
|
|
|
RcIgmpNewGroupEntry ::= SEQUENCE {
|
|
rcIgmpNewGroupIpAddress IpAddress,
|
|
rcIgmpNewGroupMembers IpAddress,
|
|
rcIgmpNewGroupInPort INTEGER,
|
|
rcIgmpNewGroupExpiration Integer32,
|
|
rcIgmpNewGroupIfIndex InterfaceIndex,
|
|
rcIgmpNewGroupUserId DisplayString,
|
|
rcIgmpNewGroupMemberState INTEGER,
|
|
rcIgmpNewGroupSessionTime Integer32,
|
|
rcIgmpNewGroupActualInPort InterfaceIndex,
|
|
rcIgmpNewGroupL2Isid Integer32
|
|
}
|
|
|
|
rcIgmpNewGroupIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Multicast group Address (Class D) that others
|
|
want to join. A group address can be the same
|
|
for many incoming ports."
|
|
::= { rcIgmpNewGroupEntry 1 }
|
|
|
|
rcIgmpNewGroupMembers OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Address of a source that has sent group
|
|
report wishing to join this group."
|
|
::= { rcIgmpNewGroupEntry 2 }
|
|
|
|
rcIgmpNewGroupInPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcIgmpNewGroupEntry 3 }
|
|
|
|
rcIgmpNewGroupExpiration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time left before the group report expired on this
|
|
port. Only one of this variable port. This
|
|
variable is updated upon receiving a group report."
|
|
::= { rcIgmpNewGroupEntry 4 }
|
|
|
|
rcIgmpNewGroupIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcIgmpNewGroupEntry 5 }
|
|
|
|
rcIgmpNewGroupUserId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "User-id sending this group"
|
|
::= { rcIgmpNewGroupEntry 6 }
|
|
|
|
rcIgmpNewGroupMemberState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noState(1),
|
|
auth(2),
|
|
accStart(3),
|
|
authAndAcctStart(4),
|
|
authAndAcctDisabled(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used for IGAP, to indicated member state."
|
|
::= { rcIgmpNewGroupEntry 7 }
|
|
|
|
rcIgmpNewGroupSessionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used for IGAP, to indicated the session time
|
|
in seconds for the member. Session time is
|
|
started after traffic is available to member.
|
|
It can be also called AccountingTime since its
|
|
values correspondes to the accounting duration of
|
|
IGAP user session."
|
|
::= { rcIgmpNewGroupEntry 8 }
|
|
|
|
rcIgmpNewGroupActualInPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources. The value of object is same as
|
|
rcIgmpNewGroupInPort except when rcIgmpNewGroupInPort
|
|
is the value of TX-NNI, rcIgmpNewGroupActualInPort will be
|
|
first active port on MLT. It should used for display to
|
|
sync up output with CLI (Introduced by VOSS 4.2.0.0).
|
|
Not applicable to VSP9000"
|
|
::= { rcIgmpNewGroupEntry 9 }
|
|
|
|
rcIgmpNewGroupL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2 ISID of the cvlan."
|
|
::= { rcIgmpNewGroupEntry 10 }
|
|
|
|
--
|
|
-- The IGMP Interface Table
|
|
--
|
|
|
|
rcIgmpInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the interfaces on which IGMP
|
|
is enabled."
|
|
::= { rcIgmp 15 }
|
|
|
|
rcIgmpInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing an interface on
|
|
which IGMP is enabled."
|
|
INDEX { rcIgmpInterfaceIfIndex }
|
|
::= { rcIgmpInterfaceTable 1 }
|
|
|
|
RcIgmpInterfaceEntry ::= SEQUENCE {
|
|
rcIgmpInterfaceIfIndex InterfaceIndexOrZero,
|
|
rcIgmpInterfaceQueryInterval Integer32,
|
|
rcIgmpInterfaceStatus RowStatus,
|
|
rcIgmpInterfaceVersion INTEGER,
|
|
rcIgmpInterfaceQuerier IpAddress,
|
|
rcIgmpInterfaceQueryMaxResponseTime Integer32,
|
|
rcIgmpInterfaceWrongVersionQueries Counter32,
|
|
rcIgmpInterfaceJoins Counter32,
|
|
rcIgmpInterfaceRobustness Integer32,
|
|
rcIgmpInterfaceLastMembQueryIntvl Integer32,
|
|
rcIgmpInterfaceOperVersion INTEGER,
|
|
rcIgmpInterfaceOtherQuerierPresentTimeout Integer32,
|
|
rcIgmpInterfaceSendQuery TruthValue
|
|
}
|
|
|
|
rcIgmpInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface for which IGMP is enabled."
|
|
::= { rcIgmpInterfaceEntry 1 }
|
|
|
|
rcIgmpInterfaceQueryInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency at which IGMP Host-Query packets are
|
|
transmitted on this interface."
|
|
DEFVAL { 125 }
|
|
::= { rcIgmpInterfaceEntry 2 }
|
|
|
|
rcIgmpInterfaceStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The activation of a row enables IGMP on the interface. The
|
|
destruction of a row disables IGMP on the interface."
|
|
::= { rcIgmpInterfaceEntry 3 }
|
|
|
|
rcIgmpInterfaceVersion OBJECT-TYPE
|
|
SYNTAX INTEGER { version1(1), version2(2), version3(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of IGMP which is running on this interface.
|
|
This object can be used to configure a router capable of
|
|
running either value. For IGMP to function correctly, all
|
|
routers on a LAN must be configured to run the same version
|
|
of IGMP on that LAN."
|
|
DEFVAL { version2 }
|
|
::= { rcIgmpInterfaceEntry 4 }
|
|
|
|
rcIgmpInterfaceQuerier OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the IGMP Querier on the IP subnet to which
|
|
this interface is attached."
|
|
::= { rcIgmpInterfaceEntry 5 }
|
|
|
|
rcIgmpInterfaceQueryMaxResponseTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "tenth of seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum query response time advertised in IGMPv2
|
|
queries on this interface."
|
|
DEFVAL { 100 }
|
|
::= { rcIgmpInterfaceEntry 6 }
|
|
|
|
rcIgmpInterfaceWrongVersionQueries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of queries received whose IGMP version does not
|
|
match rcIgmpInterfaceVersion. IGMP requires that all routers
|
|
on a LAN be configured to run the same version of IGMP.
|
|
Thus, if any queries are received with the wrong version,
|
|
this indicates a configuration error."
|
|
::= { rcIgmpInterfaceEntry 10 }
|
|
|
|
|
|
rcIgmpInterfaceJoins OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a group membership has been added on
|
|
this interface; that is, the number of times an entry for
|
|
this interface has been added to the Cache Table. This
|
|
object gives an indication of the amount of IGMP activity
|
|
over time."
|
|
::= { rcIgmpInterfaceEntry 11 }
|
|
|
|
rcIgmpInterfaceRobustness OBJECT-TYPE
|
|
SYNTAX Integer32 (2..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The robustness variable allows tuning for the expected packet
|
|
loss on a subnet. If a subnet is expected to be lossy, the
|
|
robustness Variable may be increased. IGMP is robust to
|
|
(Robustness Variable-1) packet losses."
|
|
DEFVAL { 2 }
|
|
::= { rcIgmpInterfaceEntry 14 }
|
|
|
|
rcIgmpInterfaceLastMembQueryIntvl OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "tenths of seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Last Member Query Interval is the Max Response Time
|
|
inserted into Group-Specific Queries sent in response to
|
|
Leave Group messages, and is also the amount of time between
|
|
Group-Specific Query messages. This value may be tuned to
|
|
modify the leave latency of the network. A reduced value
|
|
results in reduced time to detect the loss of the last
|
|
member of a group. The value of this object is irrelevant
|
|
if rcIgmpInterfaceVersion is 1."
|
|
DEFVAL { 1 }
|
|
::= { rcIgmpInterfaceEntry 15 }
|
|
|
|
rcIgmpInterfaceOperVersion OBJECT-TYPE
|
|
SYNTAX INTEGER { version1(1), version2(2), version3(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational version of IGMP which is running on
|
|
this interface."
|
|
::= { rcIgmpInterfaceEntry 16 }
|
|
|
|
rcIgmpInterfaceOtherQuerierPresentTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A timeout interval."
|
|
::= { rcIgmpInterfaceEntry 17 }
|
|
|
|
rcIgmpInterfaceSendQuery OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP send query flag."
|
|
::= { rcIgmpInterfaceEntry 18 }
|
|
|
|
|
|
--
|
|
-- The IGMP Cache Table
|
|
--
|
|
|
|
rcIgmpCacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the IP multicast groups for
|
|
which there are members on a particular interface."
|
|
::= { rcIgmp 16 }
|
|
|
|
rcIgmpCacheEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcIgmpCacheTable."
|
|
INDEX { rcIgmpCacheAddress, rcIgmpCacheIfIndex }
|
|
::= { rcIgmpCacheTable 1 }
|
|
|
|
|
|
RcIgmpCacheEntry ::= SEQUENCE {
|
|
rcIgmpCacheAddress IpAddress,
|
|
rcIgmpCacheIfIndex InterfaceIndexOrZero,
|
|
rcIgmpCacheLastReporter IpAddress,
|
|
rcIgmpCacheExpiryTime TimeTicks,
|
|
rcIgmpCacheVersion1HostTimer Integer32
|
|
}
|
|
|
|
rcIgmpCacheAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address for which this entry
|
|
contains information."
|
|
::= { rcIgmpCacheEntry 1 }
|
|
|
|
rcIgmpCacheIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface for which this entry contains information for
|
|
an IP multicast group address."
|
|
::= { rcIgmpCacheEntry 2 }
|
|
|
|
rcIgmpCacheLastReporter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the source of the last membership report
|
|
received for this IP Multicast group address on this
|
|
interface. If no membership report has been received, this
|
|
object has the value 0.0.0.0."
|
|
::= { rcIgmpCacheEntry 4 }
|
|
|
|
rcIgmpCacheExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum amount of time remaining before this entry will
|
|
be aged out."
|
|
::= { rcIgmpCacheEntry 6 }
|
|
|
|
|
|
rcIgmpCacheVersion1HostTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time remaining until the local router will assume that
|
|
there are no longer any IGMP version 1 members on the IP
|
|
subnet attached to this interface. Upon hearing any IGMPv1
|
|
Membership Report, this value is reset to the group
|
|
membership timer. While this time remaining is non-zero,
|
|
the local router ignores any IGMPv2 Leave messages for this
|
|
group that it receives on this interface."
|
|
::= { rcIgmpCacheEntry 8 }
|
|
|
|
--
|
|
-- The IGMP MVR Group Table
|
|
--
|
|
|
|
rcIgmpMvrGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpMvrGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the mcast-vlan-registration groups."
|
|
::= { rcIgmp 17 }
|
|
|
|
rcIgmpMvrGroupEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpMvrGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcIgmpMvrGroupTable."
|
|
INDEX { rcIgmpMvrGroupGroupAddress, rcIgmpMvrGroupVlanId }
|
|
::= { rcIgmpMvrGroupTable 1 }
|
|
|
|
|
|
RcIgmpMvrGroupEntry ::= SEQUENCE {
|
|
rcIgmpMvrGroupGroupAddress IpAddress,
|
|
rcIgmpMvrGroupVlanId RcVlanIdOrNone,
|
|
rcIgmpMvrGroupIgmpVersion Integer32,
|
|
rcIgmpMvrGroupLivingTime Integer32
|
|
}
|
|
|
|
rcIgmpMvrGroupGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group's multicast ip address."
|
|
::= { rcIgmpMvrGroupEntry 1 }
|
|
|
|
rcIgmpMvrGroupVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The igmp snoop enabled vlan this group belongs to."
|
|
::= { rcIgmpMvrGroupEntry 2 }
|
|
|
|
rcIgmpMvrGroupIgmpVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Version of this group."
|
|
::= { rcIgmpMvrGroupEntry 3 }
|
|
|
|
rcIgmpMvrGroupLivingTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Living time of this group."
|
|
::= { rcIgmpMvrGroupEntry 4 }
|
|
|
|
|
|
rcIgmpMvrVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpMvrVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the mcast vlans
|
|
in mcast-vlan-registration."
|
|
::= { rcIgmp 18 }
|
|
|
|
rcIgmpMvrVlanEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpMvrVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcIgmpMvrVlanTable."
|
|
INDEX { rcIgmpMvrVlanMvrVlanId }
|
|
::= { rcIgmpMvrVlanTable 1 }
|
|
|
|
RcIgmpMvrVlanEntry ::= SEQUENCE {
|
|
rcIgmpMvrVlanMvrVlanId RcVlanIdOrNone,
|
|
rcIgmpMvrVlanMvrVlanProxy TruthValue,
|
|
rcIgmpMvrVlanSourcePort Integer32,
|
|
rcIgmpMvrVlanSourceAddress IpAddress
|
|
}
|
|
|
|
rcIgmpMvrVlanMvrVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The id of mcast-vlan."
|
|
::= { rcIgmpMvrVlanEntry 1 }
|
|
|
|
rcIgmpMvrVlanMvrVlanProxy OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"working mode of this mcast-vlan, proxy or not."
|
|
DEFVAL { false }
|
|
::= { rcIgmpMvrVlanEntry 2 }
|
|
|
|
rcIgmpMvrVlanSourcePort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"source port for this mcast-vlan."
|
|
::= { rcIgmpMvrVlanEntry 3 }
|
|
|
|
rcIgmpMvrVlanSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"querier address for the source in this mcast-vlan."
|
|
::= { rcIgmpMvrVlanEntry 4 }
|
|
|
|
rcIgmpMvrReceiverTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpMvrReceiverEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the mcast vlans and receiver vlans
|
|
in mcast-vlan-registration."
|
|
::= { rcIgmp 19 }
|
|
|
|
rcIgmpMvrReceiverEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpMvrReceiverEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcIgmpMvrGroupTable."
|
|
INDEX { rcIgmpMvrReceiverVlanId }
|
|
::= { rcIgmpMvrReceiverTable 1 }
|
|
|
|
|
|
RcIgmpMvrReceiverEntry ::= SEQUENCE {
|
|
rcIgmpMvrReceiverVlanId RcVlanIdOrNone,
|
|
rcIgmpMvrReceiverRowStatus RowStatus
|
|
}
|
|
|
|
rcIgmpMvrReceiverVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The id of receiver vlan that bound to mcast-vlan."
|
|
::= { rcIgmpMvrReceiverEntry 1 }
|
|
|
|
rcIgmpMvrReceiverRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcIgmpMvrReceiverEntry 2 }
|
|
|
|
--
|
|
-- The IGMP Access Control List Info Table
|
|
--
|
|
|
|
rcIgmpAccessControlListInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpAccessControlListInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the Name and the Port List
|
|
for a specific IGMP Access Control List."
|
|
::= { rcIgmp 20 }
|
|
|
|
rcIgmpAccessControlListInfoEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpAccessControlListInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcIgmpAccessControlListInfoTable."
|
|
INDEX { rcIgmpAccessControlListInfoACLIndex }
|
|
::= { rcIgmpAccessControlListInfoTable 1 }
|
|
|
|
|
|
RcIgmpAccessControlListInfoEntry ::= SEQUENCE {
|
|
rcIgmpAccessControlListInfoACLIndex Integer32,
|
|
rcIgmpAccessControlListInfoName SnmpAdminString,
|
|
rcIgmpAccessControlListInfoPortList PortSet,
|
|
rcIgmpAccessControlListInfoRowStatus RowStatus
|
|
}
|
|
|
|
rcIgmpAccessControlListInfoACLIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index value that uniquely identifies an IGMP Access Control List."
|
|
::= { rcIgmpAccessControlListInfoEntry 1 }
|
|
|
|
rcIgmpAccessControlListInfoName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Name of the IGMP Access Control List."
|
|
::= { rcIgmpAccessControlListInfoEntry 2 }
|
|
|
|
rcIgmpAccessControlListInfoPortList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "List of ports that use this IGMP Access Control List."
|
|
::= { rcIgmpAccessControlListInfoEntry 3 }
|
|
|
|
rcIgmpAccessControlListInfoRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for this entry."
|
|
::= { rcIgmpAccessControlListInfoEntry 4 }
|
|
|
|
--
|
|
-- The IGMP Access Control List Conditions Table
|
|
--
|
|
|
|
rcIgmpAccessControlListConditionsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpAccessControlListConditionsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the conditions (IP ranges,
|
|
subnets) for each IGMP Access Control List."
|
|
::= { rcIgmp 21 }
|
|
|
|
rcIgmpAccessControlListConditionsEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpAccessControlListConditionsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the
|
|
rcIgmpAccessControlListConditionsTable."
|
|
INDEX { rcIgmpAccessControlListConditionsACLIndex,
|
|
rcIgmpAccessControlListConditionsIpAddrStart,
|
|
rcIgmpAccessControlListConditionsIpAddrEndOrMask }
|
|
::= { rcIgmpAccessControlListConditionsTable 1 }
|
|
|
|
RcIgmpAccessControlListConditionsEntry ::= SEQUENCE {
|
|
rcIgmpAccessControlListConditionsACLIndex Integer32,
|
|
rcIgmpAccessControlListConditionsIpAddrStart IpAddress,
|
|
rcIgmpAccessControlListConditionsIpAddrEndOrMask IpAddress,
|
|
rcIgmpAccessControlListConditionsType INTEGER,
|
|
rcIgmpAccessControlListConditionsRowStatus RowStatus
|
|
}
|
|
|
|
rcIgmpAccessControlListConditionsACLIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index value that uniquely identifies an IGMP Access Control List."
|
|
::= { rcIgmpAccessControlListConditionsEntry 1 }
|
|
|
|
rcIgmpAccessControlListConditionsIpAddrStart OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the IP address of the subnet or the Start
|
|
address of the IP range."
|
|
::= { rcIgmpAccessControlListConditionsEntry 2 }
|
|
|
|
rcIgmpAccessControlListConditionsIpAddrEndOrMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the mask of the subnet or the End address of the IP range."
|
|
::= { rcIgmpAccessControlListConditionsEntry 3 }
|
|
|
|
rcIgmpAccessControlListConditionsType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
range(1),
|
|
mask(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value specifies if the stored entry is a subnet or an IP range."
|
|
::= { rcIgmpAccessControlListConditionsEntry 4 }
|
|
|
|
rcIgmpAccessControlListConditionsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for this entry."
|
|
::= { rcIgmpAccessControlListConditionsEntry 5 }
|
|
|
|
--
|
|
-- The IGMP Static Entries Table
|
|
--
|
|
rcIgmpStaticEntriesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpStaticEntriesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the IGMP static entries installed for each vlan"
|
|
::= { rcIgmp 22 }
|
|
|
|
rcIgmpStaticEntriesEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpStaticEntriesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the
|
|
rcIgmpStaticEntriesTable."
|
|
INDEX { rcIgmpStaticEntriesVlanId,
|
|
rcIgmpStaticEntriesGroupAddress }
|
|
::= { rcIgmpStaticEntriesTable 1 }
|
|
|
|
RcIgmpStaticEntriesEntry ::= SEQUENCE {
|
|
rcIgmpStaticEntriesVlanId Integer32,
|
|
rcIgmpStaticEntriesGroupAddress IpAddress,
|
|
rcIgmpStaticEntriesPortList PortSet,
|
|
rcIgmpStaticEntriesRowStatus RowStatus
|
|
}
|
|
|
|
rcIgmpStaticEntriesVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VlanId where this entry is installed."
|
|
::= { rcIgmpStaticEntriesEntry 1 }
|
|
|
|
rcIgmpStaticEntriesGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the IP address of the IGMP group that is statically allowed on this vlan and port list."
|
|
::= { rcIgmpStaticEntriesEntry 2 }
|
|
|
|
rcIgmpStaticEntriesPortList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "List of ports where this IGMP Static Entry is installed."
|
|
::= { rcIgmpStaticEntriesEntry 3 }
|
|
|
|
rcIgmpStaticEntriesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for this entry."
|
|
::= { rcIgmpStaticEntriesEntry 4 }
|
|
|
|
--
|
|
-- The IGMP Group Ext Table
|
|
--
|
|
|
|
rcIgmpGroupExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpGroupExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the multicast groups configured in
|
|
the device."
|
|
::= { rcIgmp 23 }
|
|
|
|
rcIgmpGroupExtEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpGroupExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing an Igmp group."
|
|
INDEX { rcIgmpGroupExtIpAddress,
|
|
rcIgmpGroupExtSourceAddress,
|
|
rcIgmpGroupExtMembers }
|
|
::= { rcIgmpGroupExtTable 1 }
|
|
|
|
RcIgmpGroupExtEntry ::= SEQUENCE {
|
|
rcIgmpGroupExtIpAddress IpAddress,
|
|
rcIgmpGroupExtSourceAddress IpAddress,
|
|
rcIgmpGroupExtMembers IpAddress,
|
|
rcIgmpGroupExtInPort Integer32,
|
|
rcIgmpGroupExtExpiration Integer32,
|
|
rcIgmpGroupExtIfIndex InterfaceIndex,
|
|
rcIgmpGroupExtUserId DisplayString,
|
|
rcIgmpGroupExtMemberState INTEGER,
|
|
rcIgmpGroupExtSessionTime Integer32,
|
|
rcIgmpGroupExtMode INTEGER
|
|
}
|
|
|
|
rcIgmpGroupExtIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast group Address (Class D) that others want to join. A group
|
|
address can be the same for many incoming ports."
|
|
::= { rcIgmpGroupExtEntry 1 }
|
|
|
|
rcIgmpGroupExtSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of the source."
|
|
::= { rcIgmpGroupExtEntry 2 }
|
|
|
|
rcIgmpGroupExtMembers OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of a source that has sent group report wishing to join
|
|
this group."
|
|
::= { rcIgmpGroupExtEntry 3 }
|
|
|
|
rcIgmpGroupExtInPort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An unique value to identify a physical interface or a logical
|
|
interface (VLAN), which has received Group reports from various
|
|
sources."
|
|
::= { rcIgmpGroupExtEntry 4 }
|
|
|
|
rcIgmpGroupExtExpiration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time left before the group report expired on this port. Only one
|
|
of this variable port. This variable is updated upon receiving
|
|
a group report."
|
|
::= { rcIgmpGroupExtEntry 5 }
|
|
|
|
rcIgmpGroupExtIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An unique value to identify a physical interface or a logical
|
|
interface (VLAN), which has received Group reports from various
|
|
sources."
|
|
::= { rcIgmpGroupExtEntry 6 }
|
|
|
|
rcIgmpGroupExtUserId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User-id sending this group"
|
|
::= { rcIgmpGroupExtEntry 7 }
|
|
|
|
rcIgmpGroupExtMemberState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noState(1),
|
|
auth(2),
|
|
accStart(3),
|
|
authAndAcctStart(4),
|
|
authAndAcctDisabled(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used for IGAP, to indicated member state."
|
|
::= { rcIgmpGroupExtEntry 8 }
|
|
|
|
rcIgmpGroupExtSessionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used for IGAP, to indicated the session time in seconds for the
|
|
member. Session time is started after traffic is available to
|
|
member. It can be also called AccountingTime since its value
|
|
corresponds to the accounting duration of IGAP user session."
|
|
::= { rcIgmpGroupExtEntry 9 }
|
|
|
|
rcIgmpGroupExtMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include(1),
|
|
exclude(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address mode."
|
|
::= { rcIgmpGroupExtEntry 10 }
|
|
|
|
rcIgmpGenerateTrap OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling the IGMP to generate trap."
|
|
DEFVAL { disable }
|
|
::= { rcIgmpGlobalParams 2 }
|
|
|
|
rcIgmpGenerateLog OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling the IGMP to generate log."
|
|
DEFVAL { disable }
|
|
::= { rcIgmpGlobalParams 3 }
|
|
|
|
rcIgmpMvr OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling mcast-vlan-registration globally."
|
|
DEFVAL { disable }
|
|
::= { rcIgmpGlobalParams 4 }
|
|
|
|
rcIgmpMulticastFilterMode OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling the IGMP to filter on unknown multicast streams."
|
|
DEFVAL { disable }
|
|
::= { rcIgmpGlobalParams 5 }
|
|
|
|
--The IGMPv3 Router Cache Table
|
|
|
|
rcIgmpv3CacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpv3CacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table listing the Igmpv3 specific data
|
|
corresponding to each interface, port and multicast group pair on
|
|
a Router."
|
|
::= { rcIgmp 24 }
|
|
|
|
rcIgmpv3CacheEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpv3CacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) representing an Igmpv3 Group."
|
|
INDEX { rcIgmpv3CacheEntryGroupAddress,
|
|
rcIgmpv3CacheEntryIfIndex,
|
|
rcIgmpv3CacheEntryInPort
|
|
}
|
|
::= { rcIgmpv3CacheTable 1 }
|
|
|
|
RcIgmpv3CacheEntry ::= SEQUENCE {
|
|
rcIgmpv3CacheEntryGroupAddress IpAddress,
|
|
rcIgmpv3CacheEntryIfIndex InterfaceIndex,
|
|
rcIgmpv3CacheEntryInPort INTEGER,
|
|
rcIgmpv3CacheEntryModeExpiryTimer Integer32,
|
|
rcIgmpv3CacheEntryVersion1HostTimer Integer32,
|
|
rcIgmpv3CacheEntryVersion2HostTimer Integer32,
|
|
rcIgmpv3CacheEntrySourceFilterMode INTEGER
|
|
}
|
|
|
|
rcIgmpv3CacheEntryGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Multicast group Address (Class D) that others
|
|
want to join. A group address can be the same
|
|
for many incoming ports."
|
|
::= { rcIgmpv3CacheEntry 1 }
|
|
|
|
rcIgmpv3CacheEntryIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcIgmpv3CacheEntry 2 }
|
|
|
|
rcIgmpv3CacheEntryInPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcIgmpv3CacheEntry 3 }
|
|
|
|
rcIgmpv3CacheEntryModeExpiryTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value is applicable only to IGMPv3-compatible nodes
|
|
and represents the time remaining before the interface
|
|
EXCLUDE state expires and the interface state transitions
|
|
to INCLUDE mode. This value can never be greater than
|
|
rcIgmpNewGroupExpiration."
|
|
::= { rcIgmpv3CacheEntry 4 }
|
|
|
|
rcIgmpv3CacheEntryVersion1HostTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time remaining until the local router will assume that
|
|
there are no longer any IGMP version 1 members on the IP
|
|
subnet attached to this interface. This entry only applies
|
|
to IGMPv1 hosts. Upon hearing any IGMPv1 Report, this
|
|
value is reset to the group membership timer. While this
|
|
time remaining is non-zero, the local router ignores any
|
|
IGMPv2 Leave messages for this group that it receives
|
|
on this interface."
|
|
::= { rcIgmpv3CacheEntry 5 }
|
|
|
|
rcIgmpv3CacheEntryVersion2HostTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time remaining until the local router will assume that
|
|
there are no longer any IGMP version 2 members on the IP
|
|
subnet attached to this interface. Upon hearing any IGMPv2 Membership
|
|
Report, this value is reset to the group membership timer.
|
|
Assuming no IGMPv1 hosts have been detected, the local
|
|
router does not ignore any IGMPv2 Leave messages for this
|
|
group that it receives on this interface."
|
|
::= { rcIgmpv3CacheEntry 6 }
|
|
|
|
rcIgmpv3CacheEntrySourceFilterMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include (1),
|
|
exclude (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current group state, applicable to IGMPv3-compatible
|
|
nodes. The value indicates whether the state is INCLUDE or
|
|
EXCLUDE."
|
|
::= { rcIgmpv3CacheEntry 7 }
|
|
|
|
|
|
--The IGMPv3 Router Source list Table
|
|
|
|
--
|
|
-- This information helps to interpret the content of the rcIgmpRouterSrcListTable.
|
|
-- 1. rcIgmpRouterSrcListHostAddress is not zero; rcIgmpRouterSrcListMemberAddress is zero.
|
|
-- This is the case when we have a source in the include list and no receiver asked it
|
|
-- explicitly (conflict source).
|
|
-- Ex: Two receivers present; one receiver is in EXLCUDE{S1} and the other one is in
|
|
-- EXLCUDE{S2}. The group state is EXCLUDE("S2","NULL").
|
|
-- 2. rcIgmpRouterSrcListHostAddress is not zero, rcIgmpRouterSrcListMemberAddress is not zero.
|
|
-- This is the case when a receiver asked to receive traffic for a specific source.
|
|
-- Ex: One receiver present in INCLUDE{S1}
|
|
-- 3. rcIgmpRouterSrcListHostAddress is not zero, rcIgmpRouterSrcListMemberAddress is zero.
|
|
-- This represent a source that needs to be blocked.
|
|
-- 4. rcIgmpRouterSrcListHostAddres is zero rcIgmpRouterSrcListMemberAddress is not zero.
|
|
-- The source zero is used to track the members that are in exclude mode
|
|
-- Ex: One receiver R1 in EXCLUDE(S1). Two entries are present in this table.
|
|
-- 4.1. rcIgmpRouterSrcListHostAddres = S1, rcIgmpRouterSrcListMemberAddress = 0 - blocked source.
|
|
-- 4.2. rcIgmpRouterSrcListHostAddres = 0, rcIgmpRouterSrcListMemberAddress = R1 - tracked member in exlcude mode.
|
|
--
|
|
-- If the explicit host tracking is not enabled the only the last reporter for a specific source or group
|
|
-- will be present in this table.
|
|
--
|
|
|
|
rcIgmpRouterSrcListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpRouterSrcListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table listing the Source List entries
|
|
corresponding to each interface and multicast group pair on
|
|
a Router."
|
|
::= { rcIgmp 25 }
|
|
|
|
rcIgmpRouterSrcListEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpRouterSrcListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) representing an
|
|
Igmp Source."
|
|
INDEX { rcIgmpRouterSrcListGroupAddress,
|
|
rcIgmpRouterSrcListIfIndex,
|
|
rcIgmpRouterSrcListInPort,
|
|
rcIgmpRouterSrcListHostAddress,
|
|
rcIgmpRouterSrcListMemberAddress
|
|
}
|
|
::= { rcIgmpRouterSrcListTable 1 }
|
|
|
|
RcIgmpRouterSrcListEntry ::= SEQUENCE {
|
|
rcIgmpRouterSrcListGroupAddress IpAddress,
|
|
rcIgmpRouterSrcListIfIndex InterfaceIndex,
|
|
rcIgmpRouterSrcListInPort INTEGER,
|
|
rcIgmpRouterSrcListHostAddress IpAddress,
|
|
rcIgmpRouterSrcListMemberAddress IpAddress,
|
|
rcIgmpRouterSrcListExpire Integer32,
|
|
rcIgmpRouterSrcListMode INTEGER,
|
|
rcIgmpRouterSrcListMemberExpire Integer32
|
|
}
|
|
|
|
rcIgmpRouterSrcListGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP multicast group address for which this entry
|
|
contains information."
|
|
::= { rcIgmpRouterSrcListEntry 1 }
|
|
|
|
rcIgmpRouterSrcListIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface for which this entry contains information
|
|
for an IP multicast group address."
|
|
::= { rcIgmpRouterSrcListEntry 2 }
|
|
|
|
rcIgmpRouterSrcListInPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports for this
|
|
source."
|
|
::= { rcIgmpRouterSrcListEntry 3 }
|
|
|
|
rcIgmpRouterSrcListHostAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The host address to which this entry corresponds."
|
|
::= { rcIgmpRouterSrcListEntry 4 }
|
|
|
|
rcIgmpRouterSrcListMemberAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Address of a member that has sent source specific
|
|
report wishing to join this source."
|
|
::= { rcIgmpRouterSrcListEntry 5 }
|
|
|
|
rcIgmpRouterSrcListExpire OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value indicates the relevance of the SrcList entry,
|
|
whereby a non-zero value indicates this is an INCLUDE state
|
|
value, and a zero value indicates this to be an EXCLUDE
|
|
state value."
|
|
::= { rcIgmpRouterSrcListEntry 6 }
|
|
|
|
rcIgmpRouterSrcListMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include (1),
|
|
exclude (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current member state, applicable to IGMPv3-compatible
|
|
nodes. The value indicates whether the state is INCLUDE or
|
|
EXCLUDE."
|
|
::= { rcIgmpRouterSrcListEntry 7 }
|
|
|
|
rcIgmpRouterSrcListMemberExpire OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value indicates the time until the member for this source
|
|
will expire"
|
|
::= { rcIgmpRouterSrcListEntry 8 }
|
|
|
|
-- IGMP SSM Mapping Table - supported by VSP 3.2 release
|
|
|
|
rcIgmpNewSsmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpNewSsmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcIgmp 26 }
|
|
|
|
rcIgmpNewSsmEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpNewSsmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpNewSsmIpMulticastGrp,
|
|
rcIgmpNewSsmIpSource }
|
|
::= { rcIgmpNewSsmTable 1 }
|
|
|
|
RcIgmpNewSsmEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpNewSsmIpMulticastGrp IpAddress,
|
|
rcIgmpNewSsmIpSource IpAddress,
|
|
rcIgmpNewSsmLearningMode INTEGER,
|
|
rcIgmpNewSsmActivity TruthValue,
|
|
rcIgmpNewSsmAdminState EnableValue,
|
|
rcIgmpNewSsmRowStatus RowStatus
|
|
}
|
|
|
|
rcIgmpNewSsmIpMulticastGrp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the IP multicast group address
|
|
that has default range of 232/8.
|
|
This parameter should be configured by the user."
|
|
::= { rcIgmpNewSsmEntry 1 }
|
|
|
|
rcIgmpNewSsmIpSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the Source's IP address that will
|
|
be sending traffic to the group source.
|
|
This parameter should be configured by the user."
|
|
::= { rcIgmpNewSsmEntry 2 }
|
|
|
|
rcIgmpNewSsmLearningMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a read only field that provides
|
|
information if the entry is statically
|
|
configured entry (Static) or a dynamically
|
|
learned entry from IGMPv3 (Dynamic). Note
|
|
that Dynamic may not be used in the first
|
|
step of the implementation."
|
|
::= { rcIgmpNewSsmEntry 3 }
|
|
|
|
rcIgmpNewSsmActivity OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a read only field. It provides
|
|
the activity on the corresponding (S,G). If
|
|
the source is active and traffic is flowing
|
|
to the switch, this field value should be
|
|
Active, otherwise it should say non-active.
|
|
This information is useful in knowing if the
|
|
group has an active source or not when the group
|
|
is joined by a member on the switch."
|
|
::= { rcIgmpNewSsmEntry 4 }
|
|
|
|
rcIgmpNewSsmAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The admin state provides information on
|
|
whether the entry is to be used or not. If the
|
|
value of this field is Enabled (default), then
|
|
the entry can be used. If the state is Disabled,
|
|
then the entry will not be used, but will be
|
|
saved for future use."
|
|
::= { rcIgmpNewSsmEntry 5 }
|
|
|
|
rcIgmpNewSsmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcIgmpNewSsmEntry 6 }
|
|
|
|
|
|
|
|
-- IGMP Correct Sender
|
|
|
|
rcIgmpSendersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpSendersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table obsoletes rcIgmpSenderTable"
|
|
::= { rcIgmp 28 }
|
|
|
|
rcIgmpSendersEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpSendersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcIgmpSendersIfIndex, rcIgmpSendersGrpAddr,
|
|
rcIgmpSendersMemberAddr }
|
|
::= { rcIgmpSendersTable 1 }
|
|
|
|
RcIgmpSendersEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpSendersIfIndex InterfaceIndex,
|
|
rcIgmpSendersGrpAddr IpAddress,
|
|
rcIgmpSendersMemberAddr IpAddress,
|
|
rcIgmpSendersAction INTEGER,
|
|
rcIgmpSendersTPort Integer32,
|
|
rcIgmpSendersState INTEGER,
|
|
rcIgmpSendersL2Isid Integer32
|
|
}
|
|
|
|
rcIgmpSendersIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ifindex - Uniquely identifies entries in the table"
|
|
::= { rcIgmpSendersEntry 1 }
|
|
|
|
rcIgmpSendersGrpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip multicast address of a group"
|
|
::= { rcIgmpSendersEntry 2 }
|
|
|
|
rcIgmpSendersMemberAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ip address of a host."
|
|
::= { rcIgmpSendersEntry 3 }
|
|
|
|
rcIgmpSendersAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
flushEntry(2),
|
|
flushGrp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "none(1), flushEntry(2), flushGrp(3).
|
|
It describes the IGMP Sender action."
|
|
::= { rcIgmpSendersEntry 4 }
|
|
|
|
rcIgmpSendersTPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Igmp Sender Tport."
|
|
::= { rcIgmpSendersEntry 5 }
|
|
|
|
rcIgmpSendersState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filtered(1),
|
|
notfiltered(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if a sender exists because of an
|
|
IGMP access filter or not."
|
|
::= { rcIgmpSendersEntry 6 }
|
|
|
|
rcIgmpSendersL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2 ISID of the cvlan"
|
|
::= { rcIgmpSendersEntry 7 }
|
|
|
|
|
|
-- VRRP
|
|
|
|
rcVrrpMib OBJECT IDENTIFIER ::= { rcVrrp 1 }
|
|
rcVrrpObjects OBJECT IDENTIFIER ::= { rcVrrpMib 1 }
|
|
rcVrrpNotifications OBJECT IDENTIFIER ::= { rcVrrpMib 2 }
|
|
|
|
|
|
-- ---------------------------------------------------------
|
|
-- Scalar Objects
|
|
-- ---------------------------------------------------------
|
|
rcVrrpScalars OBJECT IDENTIFIER ::= { rcVrrpObjects 1 }
|
|
|
|
rcVrrpPingVirtualAddrEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to configure whether this device should respond to
|
|
pings directed to a virtual router's IP address."
|
|
DEFVAL { true }
|
|
::= { rcVrrpScalars 1 }
|
|
|
|
rcVrrpTrapStateTransitionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
masterToBackup(2),
|
|
backupToMaster(3),
|
|
initializeToMaster(4),
|
|
masterToInitialize(5),
|
|
initializeToBackup(6),
|
|
backupToInitialize(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Potential types of state transitions.
|
|
Used by rcVrrpTrapStateTransition trap."
|
|
::= { rcVrrpScalars 2 }
|
|
|
|
rcVrrpTrapStateTransitionCause OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
higherPriorityAdvertizeReceived(2),
|
|
shutdownReceived(3),
|
|
rcVrrpAddrAndPhysicalAddrMatch(4),
|
|
masterDownInterval(5),
|
|
preempted(6),
|
|
lowerPriorityAdvertizeReceived(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Potential types of causes that will
|
|
generate a rcVrrpTrapStateTransition trap."
|
|
::= { rcVrrpScalars 3 }
|
|
|
|
|
|
-- VRRP Operations Table
|
|
rcVrrpOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrrpOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operations table for a VRRP router which consists of a
|
|
sequence (i.e., one or more conceptual rows) of
|
|
'rcVrrpOperEntry' items."
|
|
::= { rcVrrpObjects 2 }
|
|
|
|
rcVrrpOperEntry OBJECT-TYPE
|
|
SYNTAX RcVrrpOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the rcVrrpOperTable containing the operational
|
|
characteristics of a virtual router. On a VRRP router,
|
|
a given virtual router is identified by a combination
|
|
of the IF index and VRID."
|
|
INDEX { rcVrrpOperIfIndex, rcVrrpOperVrId }
|
|
::= { rcVrrpOperTable 1 }
|
|
|
|
RcVrrpOperEntry ::=
|
|
SEQUENCE {
|
|
rcVrrpOperIfIndex
|
|
InterfaceIndexOrZero,
|
|
rcVrrpOperVrId
|
|
VrId,
|
|
rcVrrpOperIpAddr
|
|
IpAddress,
|
|
rcVrrpOperVirtualMacAddr
|
|
MacAddress,
|
|
rcVrrpOperState
|
|
INTEGER,
|
|
rcVrrpOperControl
|
|
INTEGER,
|
|
rcVrrpOperPriority
|
|
Integer32,
|
|
rcVrrpOperIpAddrCount
|
|
Integer32,
|
|
rcVrrpOperMasterIpAddr
|
|
IpAddress,
|
|
rcVrrpOperAuthType
|
|
INTEGER,
|
|
rcVrrpOperHMACMD5Key
|
|
OCTET STRING,
|
|
rcVrrpOperAuthKey
|
|
OCTET STRING,
|
|
rcVrrpOperAdvertisementInterval
|
|
Integer32,
|
|
rcVrrpOperPreemptMode
|
|
INTEGER,
|
|
rcVrrpOperVirtualRouterUpTime
|
|
TimeTicks,
|
|
rcVrrpOperRowStatus
|
|
RowStatus,
|
|
rcVrrpOperCriticalIpAddr
|
|
IpAddress,
|
|
rcVrrpOperHoldDownTimer
|
|
INTEGER,
|
|
rcVrrpOperHoldDownState
|
|
INTEGER,
|
|
rcVrrpOperHoldDownTimeRemaining
|
|
INTEGER,
|
|
rcVrrpOperAction
|
|
INTEGER,
|
|
rcVrrpOperCriticalIpAddrEnable
|
|
TruthValue,
|
|
rcVrrpOperBackUpMaster
|
|
INTEGER,
|
|
rcVrrpOperBackUpMasterState
|
|
INTEGER,
|
|
rcVrrpOperFasterAdvInterval
|
|
Integer32,
|
|
rcVrrpOperFasterAdvIntervalEnable
|
|
INTEGER
|
|
}
|
|
|
|
rcVrrpOperIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "port interface index."
|
|
::= { rcVrrpOperEntry 1 }
|
|
|
|
rcVrrpOperVrId OBJECT-TYPE
|
|
SYNTAX VrId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the Virtual Router Identifier (VRID)."
|
|
::= { rcVrrpOperEntry 2 }
|
|
|
|
rcVrrpOperIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The assigned IP addresses that a virtual router is responsible
|
|
for backing up."
|
|
::= { rcVrrpOperEntry 3 }
|
|
|
|
rcVrrpOperVirtualMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The virtual MAC address of the virtual router. This is derived
|
|
as follows: 00-00-5E-00-01-<VRID>.
|
|
|
|
Where the first three octets consist of the IANA's OUI; The
|
|
next two octets indicate the address block of the VRRP protocol;
|
|
and the remaining octets consist of the VRID.
|
|
|
|
Although this object can be derived from the 'rcVrrpOperVrId'
|
|
object, it is included here, for completeness, so that it
|
|
is easily obtainable by a management application and can be
|
|
included in VRRP-related SNMP traps."
|
|
REFERENCE
|
|
"rfc1903 - MacAddress"
|
|
::= { rcVrrpOperEntry 4 }
|
|
|
|
rcVrrpOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initialize(1), -- Waiting for a startup event
|
|
backup(2), -- Monitoring the state/availability of
|
|
-- master router
|
|
master(3) -- Forwarding IP addresses associated with
|
|
-- this virtual router.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the virtual router."
|
|
::= { rcVrrpOperEntry 5 }
|
|
|
|
rcVrrpOperControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will enable/disable the virtual router
|
|
function. Setting the value to 'enabled', will transition
|
|
the state of the router from 'initialize to 'backup';
|
|
Setting the value to 'disabled', will tranisition the
|
|
router from 'master' or 'backup' to 'initialize'."
|
|
DEFVAL { enabled }
|
|
::= { rcVrrpOperEntry 6 }
|
|
|
|
rcVrrpOperPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the priority for the virtual
|
|
router (e.g., master election) with respect to other
|
|
virtual routers that are backing up a one or more
|
|
associated IP addresses. Higher values imply higher
|
|
priority.
|
|
|
|
A priority of '0', although not settable, is used
|
|
to indicate that this router has ceased to particpate
|
|
in VRRP and a backup virtual router should transition \
|
|
to become a new master.
|
|
|
|
A priority of 255 is used for the router that owns the
|
|
associated IP address(es)."
|
|
DEFVAL { 100 }
|
|
::= { rcVrrpOperEntry 7 }
|
|
|
|
rcVrrpOperIpAddrCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IP addresses that are associated with this
|
|
virtual router. This number is equal to the number of rows
|
|
in the vrrpAssoIpAddrTable that correspond to a given IF
|
|
index/VRID pair."
|
|
::= { rcVrrpOperEntry 8 }
|
|
|
|
rcVrrpOperMasterIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The master router's real (primary) IP address. This is
|
|
the IP address listed as the source in VRRP advertisement
|
|
last received by this virtual router"
|
|
::= { rcVrrpOperEntry 9 }
|
|
|
|
rcVrrpOperAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuthentication(1), -- VRRP protocol exchanges are not
|
|
-- authenticated.
|
|
simpleTextPassword(2), -- Exchanges are authenticated by a
|
|
-- clear text password.
|
|
ipAuthenticationHeader(3) -- Exchanges are authenticated using
|
|
-- the IP authentication header [x].
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication type used for VRRP protocol exchanges between
|
|
virtual routers."
|
|
DEFVAL { noAuthentication }
|
|
::= { rcVrrpOperEntry 10 }
|
|
|
|
rcVrrpOperAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Authentication Key. If the virtual router's Authorization
|
|
Type is 'simpleTextPassword', and the key length is shorter
|
|
than 8 octets, the agent will left adjust and zero fill
|
|
to 8 octets.
|
|
|
|
When read, rcVrrpOperAuthKey always returns an Octet String
|
|
of length zero."
|
|
DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
|
|
::= { rcVrrpOperEntry 11 }
|
|
|
|
rcVrrpOperHMACMD5Key OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Authentication Key. If the virtual router's 'Authorization
|
|
Type' is 'ipAuthenticationHeader', and the key length is shorter
|
|
than 16 octets, the agent will left adjust and zero fill
|
|
to 16 octets.
|
|
|
|
When read, rcVrrpOperHMACMD5Key always returns an Octet String
|
|
of length zero."
|
|
DEFVAL { '00000000000000000000000000000000'H }
|
|
-- 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
|
|
::= { rcVrrpOperEntry 12 }
|
|
|
|
rcVrrpOperAdvertisementInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time interval, in seconds, between sending
|
|
advertisement messages. Only the master router sends
|
|
VRRP advertisements."
|
|
DEFVAL { 1 }
|
|
::= { rcVrrpOperEntry 13 }
|
|
|
|
rcVrrpOperPreemptMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1), -- Preempt
|
|
false(2) -- Do not preempt
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether a higher priority virtual router will
|
|
preempt a lower priority master."
|
|
DEFVAL { true }
|
|
::= { rcVrrpOperEntry 14 }
|
|
|
|
rcVrrpOperVirtualRouterUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time interval (in hundredths of a second)
|
|
since this virtual router was initialized."
|
|
::= { rcVrrpOperEntry 15 }
|
|
|
|
rcVrrpOperRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used according to installation
|
|
and removal conventions for conceptual rows. Setting this
|
|
object to 'createAndGo' results in enabling the VRRP
|
|
protocol for this virtual router. The information required
|
|
to actually create the conceptual row may be included in
|
|
the SET primitive or may be initialized by the agent on
|
|
the virtual router. Destroying the entry or setting it to
|
|
'notInService' disables VRRP on this virtual router."
|
|
::= { rcVrrpOperEntry 16 }
|
|
|
|
rcVrrpOperCriticalIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP address of the interface that will cause a
|
|
shutdown event."
|
|
::= { rcVrrpOperEntry 17 }
|
|
|
|
rcVrrpOperHoldDownTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..21600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to configure the amount of time (in seconds)
|
|
to wait before preempting the current vrrp master."
|
|
::= { rcVrrpOperEntry 18 }
|
|
|
|
rcVrrpOperHoldDownState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dormant(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to indicate the hold-down state of this vrrp
|
|
interface. If the hold-down timer is operational
|
|
this variable will be set to 'active'. 'dormant'
|
|
otherwise."
|
|
::= { rcVrrpOperEntry 19 }
|
|
|
|
rcVrrpOperHoldDownTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER (0..21600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to indicate the amount of time (in seconds)
|
|
left before the rcVrrpOperHoldDownTimer will expire."
|
|
::= { rcVrrpOperEntry 20 }
|
|
|
|
rcVrrpOperAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
preemptHoldDownTimer(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to trigger an action on this vrrp interface."
|
|
::= { rcVrrpOperEntry 21 }
|
|
|
|
rcVrrpOperCriticalIpAddrEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate if an user-defined critical IP address should be
|
|
enabled. 'NO' = use the default IP address (0.0.0.0).
|
|
No effect if an user-defined IP address does not exist."
|
|
DEFVAL { false }
|
|
::= { rcVrrpOperEntry 22 }
|
|
|
|
rcVrrpOperBackUpMaster OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable the backup VRRP switch traffic forwarding.
|
|
This will reduce the traffic in IST link in the time of SMLT."
|
|
DEFVAL { disabled }
|
|
::= { rcVrrpOperEntry 23 }
|
|
|
|
rcVrrpOperBackUpMasterState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether backup VRRP switch traffic forwarding is enabled or not."
|
|
DEFVAL { down }
|
|
::= { rcVrrpOperEntry 24 }
|
|
|
|
rcVrrpOperFasterAdvInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (200..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is the faster advertisement interval, in
|
|
milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead of the regular advertisement interval"
|
|
DEFVAL { 200 }
|
|
::= { rcVrrpOperEntry 25 }
|
|
|
|
rcVrrpOperFasterAdvIntervalEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval."
|
|
DEFVAL { disabled }
|
|
::= { rcVrrpOperEntry 26 }
|
|
|
|
-- Trap Definitions
|
|
|
|
rcVrrpTrapStateTransition NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex,
|
|
rcVrrpTrapStateTransitionType,
|
|
rcVrrpTrapStateTransitionCause,
|
|
rcVrrpOperVrId,
|
|
rcVrrpOperIpAddr,
|
|
rcVrrpOperMasterIpAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A rcVrrpTrapStateTransition trap signifies a state
|
|
transition has occurred on a particular vrrp interface.
|
|
Implementation of this trap is optional."
|
|
::= { rcVrrpNotifications 1 }
|
|
|
|
-- VRRP Router Stats Table
|
|
|
|
rcVrrpRouterStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrrpRouterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of virtual router statistics."
|
|
::= { rcVrrpObjects 3 }
|
|
|
|
rcVrrpRouterStatsEntry OBJECT-TYPE
|
|
SYNTAX RcVrrpRouterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table, containing statistics information
|
|
about a given virtual router."
|
|
AUGMENTS {
|
|
rcVrrpOperEntry
|
|
}
|
|
::= { rcVrrpRouterStatsTable 1 }
|
|
|
|
RcVrrpRouterStatsEntry ::= SEQUENCE {
|
|
rcVrrpStatsIfIndex
|
|
Integer32,
|
|
rcVrrpStatsVrId
|
|
VrId,
|
|
rcVrrpStatsBecomeMaster
|
|
Counter32,
|
|
rcVrrpStatsAdvertiseRcvd
|
|
Counter32,
|
|
rcVrrpStatsAdvertiseIntervalErrors
|
|
Counter32,
|
|
rcVrrpStatsPasswdSecurityViolations
|
|
Counter32,
|
|
rcVrrpStatsHmacSecurityViolations
|
|
Counter32,
|
|
rcVrrpStatsIpTtlErrors
|
|
Counter32,
|
|
rcVrrpStatsPriorityZeroPktsRcvd
|
|
Counter32,
|
|
rcVrrpStatsPriorityZeroPktsSent
|
|
Counter32,
|
|
rcVrrpStatsInvalidTypePktsRcvd
|
|
Counter32,
|
|
rcVrrpStatsAddressListErrors
|
|
Counter32,
|
|
rcVrrpStatsUnknownAuthType
|
|
Counter32,
|
|
rcVrrpStatsAuthTypeErrors
|
|
Counter32
|
|
}
|
|
|
|
rcVrrpStatsIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port interface index."
|
|
::= { rcVrrpRouterStatsEntry 1 }
|
|
|
|
rcVrrpStatsVrId OBJECT-TYPE
|
|
SYNTAX VrId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the Virtual Router Identifier (VRID)."
|
|
::= { rcVrrpRouterStatsEntry 2 }
|
|
|
|
rcVrrpStatsBecomeMaster OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times that this virtual router's state
|
|
has transitioned from BACKUP to MASTER."
|
|
::= { rcVrrpRouterStatsEntry 3 }
|
|
|
|
rcVrrpStatsAdvertiseRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP advertisements received by this
|
|
virtual router."
|
|
::= { rcVrrpRouterStatsEntry 4 }
|
|
|
|
rcVrrpStatsAdvertiseIntervalErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP advertisement packets received
|
|
for which the advertisement interval is different than the
|
|
one configured for the local virtual router."
|
|
::= { rcVrrpRouterStatsEntry 5 }
|
|
|
|
rcVrrpStatsPasswdSecurityViolations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received that do not pass
|
|
the simple text password authentification check."
|
|
::= { rcVrrpRouterStatsEntry 6 }
|
|
|
|
rcVrrpStatsHmacSecurityViolations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received that do not pass
|
|
the HMAC-MD5-96 authentification check."
|
|
::= { rcVrrpRouterStatsEntry 7 }
|
|
|
|
rcVrrpStatsIpTtlErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received by the virtual
|
|
router with IP TTL (Time-To-Live) not equal to 255."
|
|
::= { rcVrrpRouterStatsEntry 8 }
|
|
|
|
rcVrrpStatsPriorityZeroPktsRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received by the virtual
|
|
router with a priority of '0'."
|
|
::= { rcVrrpRouterStatsEntry 9 }
|
|
|
|
rcVrrpStatsPriorityZeroPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets sent by the virtual router
|
|
with a priority of '0'."
|
|
::= { rcVrrpRouterStatsEntry 10 }
|
|
|
|
rcVrrpStatsInvalidTypePktsRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRRP packets received by the virtual router
|
|
with an invalid value in the 'type' field."
|
|
::= { rcVrrpRouterStatsEntry 11 }
|
|
|
|
rcVrrpStatsAddressListErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packets received address list the address list does not
|
|
match the locally configured list for the virtual router."
|
|
::= { rcVrrpRouterStatsEntry 12 }
|
|
|
|
rcVrrpStatsUnknownAuthType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packets received with an unknown authentication type."
|
|
::= { rcVrrpRouterStatsEntry 13 }
|
|
|
|
rcVrrpStatsAuthTypeErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packets received with 'Auth Type' not equal to the locally
|
|
configured authentication method ('vrrpOperAuthType')."
|
|
::= { rcVrrpRouterStatsEntry 14 }
|
|
|
|
-- System Time Grp
|
|
|
|
rcUserSetTimeYear OBJECT-TYPE
|
|
SYNTAX INTEGER (1998..2097)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Year of the time."
|
|
DEFVAL {1998}
|
|
::= { rcUserSetTime 1 }
|
|
|
|
rcUserSetTimeMonth OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Month of the time."
|
|
DEFVAL {1}
|
|
::= { rcUserSetTime 2 }
|
|
|
|
rcUserSetTimeDate OBJECT-TYPE
|
|
SYNTAX INTEGER (1..31)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Date of the time."
|
|
DEFVAL {1}
|
|
::= { rcUserSetTime 3 }
|
|
|
|
rcUserSetTimeHour OBJECT-TYPE
|
|
SYNTAX INTEGER (0..23)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Hour of the time."
|
|
DEFVAL {0}
|
|
::= { rcUserSetTime 4 }
|
|
|
|
rcUserSetTimeMinute OBJECT-TYPE
|
|
SYNTAX INTEGER (0..59)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Minute of the time."
|
|
DEFVAL {0}
|
|
::= { rcUserSetTime 5 }
|
|
|
|
rcUserSetTimeSecond OBJECT-TYPE
|
|
SYNTAX INTEGER (0..59)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Second of the time."
|
|
DEFVAL {0}
|
|
::= { rcUserSetTime 6 }
|
|
|
|
rcUserSetTimeTimezone OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cet(1),
|
|
cst6Cdt(2),
|
|
cuba(3),
|
|
eet(4),
|
|
est(5),
|
|
est5Edt(6),
|
|
egypt(7),
|
|
eire(8),
|
|
factory(9),
|
|
gb(10),
|
|
gbEire(11),
|
|
gmt(12),
|
|
gmtE0(13),
|
|
gmtW0(14),
|
|
gmt0(15),
|
|
greenwich(16),
|
|
hst(17),
|
|
hongkong(18),
|
|
iceland(19),
|
|
iran(20),
|
|
israel(21),
|
|
jamaica(22),
|
|
japan(23),
|
|
kwajalein(24),
|
|
libya(25),
|
|
met(26),
|
|
mst(27),
|
|
mst7MDT(28),
|
|
nz(29),
|
|
nzCHAT(30),
|
|
navajo(31),
|
|
prc(32),
|
|
pst8PDT(33),
|
|
poland(34),
|
|
portugal(35),
|
|
roc(36),
|
|
rok(37),
|
|
singapore(38),
|
|
turkey(39),
|
|
uct(40),
|
|
utc(41),
|
|
universal(42),
|
|
wSU(43),
|
|
wet(44),
|
|
zulu(45),
|
|
africa-Abidjan(46),
|
|
africa-Accra(47),
|
|
africa-AddisAbaba(48),
|
|
africa-Algiers(49),
|
|
africa-Asmera(50),
|
|
africa-Bamako(51),
|
|
africa-Bangui(52),
|
|
africa-Banjul(53),
|
|
africa-Bissau(54),
|
|
africa-Blantyre(55),
|
|
africa-Brazzaville(56),
|
|
africa-Bujumbura(57),
|
|
africa-Cairo(58),
|
|
africa-Casablanca(59),
|
|
africa-Ceuta(60),
|
|
africa-Conakry(61),
|
|
africa-Dakar(62),
|
|
africa-DarEsSalaam(63),
|
|
africa-Djibouti(64),
|
|
africa-Douala(65),
|
|
africa-ElAaiun(66),
|
|
africa-Freetown(67),
|
|
africa-Gaborone(68),
|
|
africa-Harare(69),
|
|
africa-Johannesburg(70),
|
|
africa-Kampala(71),
|
|
africa-Khartoum(72),
|
|
africa-Kigali(73),
|
|
africa-Kinshasa(74),
|
|
africa-Lagos(75),
|
|
africa-Libreville(76),
|
|
africa-Lome(77),
|
|
africa-Luanda(78),
|
|
africa-Lubumbashi(79),
|
|
africa-Lusaka(80),
|
|
africa-Malabo(81),
|
|
africa-Maputo(82),
|
|
africa-Maseru(83),
|
|
africa-Mbabane(84),
|
|
africa-Mogadishu(85),
|
|
africa-Monrovia(86),
|
|
africa-Nairobi(87),
|
|
africa-Ndjamena(88),
|
|
africa-Niamey(89),
|
|
africa-Nouakchott(90),
|
|
africa-Ouagadougou(91),
|
|
africa-PortoNovo(92),
|
|
africa-SaoTome(93),
|
|
africa-Timbuktu(94),
|
|
africa-Tripoli(95),
|
|
africa-Tunis(96),
|
|
africa-Windhoek(97),
|
|
america-Adak(98),
|
|
america-Anchorage(99),
|
|
america-Anguilla(100),
|
|
america-Antigua(101),
|
|
america-Araguaina(102),
|
|
america-Aruba(103),
|
|
america-Asuncion(104),
|
|
america-Atikokan(105),
|
|
america-Atka(106),
|
|
america-Bahia(107),
|
|
america-Barbados(108),
|
|
america-Belem(109),
|
|
america-Belize(110),
|
|
america-BlancSablon(111),
|
|
america-BoaVista(112),
|
|
america-Bogota(113),
|
|
america-Boise(114),
|
|
america-BuenosAires(115),
|
|
america-CambridgeBay(116),
|
|
america-CampoGrande(117),
|
|
america-Cancun(118),
|
|
america-Caracas(119),
|
|
america-Catamarca(120),
|
|
america-Cayenne(121),
|
|
america-Cayman(122),
|
|
america-Chicago(123),
|
|
america-Chihuahua(124),
|
|
america-CoralHarbour(125),
|
|
america-Cordoba(126),
|
|
america-CostaRica(127),
|
|
america-Cuiaba(128),
|
|
america-Curacao(129),
|
|
america-Danmarkshavn(130),
|
|
america-Dawson(131),
|
|
america-DawsonCreek(132),
|
|
america-Denver(133),
|
|
america-Detroit(134),
|
|
america-Dominica(135),
|
|
america-Edmonton(136),
|
|
america-Eirunepe(137),
|
|
america-ElSalvador(138),
|
|
america-Ensenada(139),
|
|
america-FortWayne(140),
|
|
america-Fortaleza(141),
|
|
america-GlaceBay(142),
|
|
america-Godthab(143),
|
|
america-GooseBay(144),
|
|
america-GrandTurk(145),
|
|
america-Grenada(146),
|
|
america-Guadeloupe(147),
|
|
america-Guatemala(148),
|
|
america-Guayaquil(149),
|
|
america-Guyana(150),
|
|
america-Halifax(151),
|
|
america-Havana(152),
|
|
america-Hermosillo(153),
|
|
america-Indianapolis(154),
|
|
america-Inuvik(155),
|
|
america-Iqaluit(156),
|
|
america-Jamaica(157),
|
|
america-Jujuy(158),
|
|
america-Juneau(159),
|
|
america-KnoxIN(160),
|
|
america-LaPaz(161),
|
|
america-Lima(162),
|
|
america-LosAngeles(163),
|
|
america-Louisville(164),
|
|
america-Maceio(165),
|
|
america-Managua(166),
|
|
america-Manaus(167),
|
|
america-Martinique(168),
|
|
america-Mazatlan(169),
|
|
america-Mendoza(170),
|
|
america-Menominee(171),
|
|
america-Merida(172),
|
|
america-MexicoCity(173),
|
|
america-Miquelon(174),
|
|
america-Moncton(175),
|
|
america-Monterrey(176),
|
|
america-Montevideo(177),
|
|
america-Montreal(178),
|
|
america-Montserrat(179),
|
|
america-Nassau(180),
|
|
america-NewYork(181),
|
|
america-Nipigon(182),
|
|
america-Nome(183),
|
|
america-Noronha(184),
|
|
america-Panama(185),
|
|
america-Pangnirtung(186),
|
|
america-Paramaribo(187),
|
|
america-Phoenix(188),
|
|
america-PortAuPrince(189),
|
|
america-PortOfSpain(190),
|
|
america-PortoAcre(191),
|
|
america-PortoVelho(192),
|
|
america-PuertoRico(193),
|
|
america-RainyRiver(194),
|
|
america-RankinInlet(195),
|
|
america-Recife(196),
|
|
america-Regina(197),
|
|
america-RioBranco(198),
|
|
america-Rosario(199),
|
|
america-Santiago(200),
|
|
america-SantoDomingo(201),
|
|
america-SaoPaulo(202),
|
|
america-Scoresbysund(203),
|
|
america-Shiprock(204),
|
|
america-StJohns(205),
|
|
america-StKitts(206),
|
|
america-StLucia(207),
|
|
america-StThomas(208),
|
|
america-StVincent(209),
|
|
america-SwiftCurrent(210),
|
|
america-Tegucigalpa(211),
|
|
america-Thule(212),
|
|
america-ThunderBay(213),
|
|
america-Tijuana(214),
|
|
america-Toronto(215),
|
|
america-Tortola(216),
|
|
america-Vancouver(217),
|
|
america-Virgin(218),
|
|
america-Whitehorse(219),
|
|
america-Winnipeg(220),
|
|
america-Yakutat(221),
|
|
america-Yellowknife(222),
|
|
antarctica-Casey(223),
|
|
antarctica-Davis(224),
|
|
antarctica-DumontDUrville(225),
|
|
antarctica-Mawson(226),
|
|
antarctica-McMurdo(227),
|
|
antarctica-Palmer(228),
|
|
antarctica-Rothera(229),
|
|
antarctica-SouthPole(230),
|
|
antarctica-Syowa(231),
|
|
antarctica-Vostok(232),
|
|
arctic-Longyearbyen(233),
|
|
asia-Aden(234),
|
|
asia-Almaty(235),
|
|
asia-Amman(236),
|
|
asia-Anadyr(237),
|
|
asia-Aqtau(238),
|
|
asia-Aqtobe(239),
|
|
asia-Ashgabat(240),
|
|
asia-Ashkhabad(241),
|
|
asia-Baghdad(242),
|
|
asia-Bahrain(243),
|
|
asia-Baku(244),
|
|
asia-Bangkok(245),
|
|
asia-Beirut(246),
|
|
asia-Bishkek(247),
|
|
asia-Brunei(248),
|
|
asia-Calcutta(249),
|
|
asia-Choibalsan(250),
|
|
asia-Chongqing(251),
|
|
asia-Chungking(252),
|
|
asia-Colombo(253),
|
|
asia-Dacca(254),
|
|
asia-Damascus(255),
|
|
asia-Dhaka(256),
|
|
asia-Dili(257),
|
|
asia-Dubai(258),
|
|
asia-Dushanbe(259),
|
|
asia-Gaza(260),
|
|
asia-Harbin(261),
|
|
asia-HongKong(262),
|
|
asia-Hovd(263),
|
|
asia-Irkutsk(264),
|
|
asia-Istanbul(265),
|
|
asia-Jakarta(266),
|
|
asia-Jayapura(267),
|
|
asia-Jerusalem(268),
|
|
asia-Kabul(269),
|
|
asia-Kamchatka(270),
|
|
asia-Karachi(271),
|
|
asia-Kashgar(272),
|
|
asia-Katmandu(273),
|
|
asia-Krasnoyarsk(274),
|
|
asia-KualaLumpur(275),
|
|
asia-Kuching(276),
|
|
asia-Kuwait(277),
|
|
asia-Macao(278),
|
|
asia-Macau(279),
|
|
asia-Magadan(280),
|
|
asia-Makassar(281),
|
|
asia-Manila(282),
|
|
asia-Muscat(283),
|
|
asia-Nicosia(284),
|
|
asia-Novosibirsk(285),
|
|
asia-Omsk(286),
|
|
asia-Oral(287),
|
|
asia-PhnomPenh(288),
|
|
asia-Pontianak(289),
|
|
asia-Pyongyang(290),
|
|
asia-Qatar(291),
|
|
asia-Qyzylorda(292),
|
|
asia-Rangoon(293),
|
|
asia-Riyadh(294),
|
|
asia-Riyadh87(295),
|
|
asia-Riyadh88(296),
|
|
asia-Riyadh89(297),
|
|
asia-Saigon(298),
|
|
asia-Sakhalin(299),
|
|
asia-Samarkand(300),
|
|
asia-Seoul(301),
|
|
asia-Shanghai(302),
|
|
asia-Singapore(303),
|
|
asia-Taipei(304),
|
|
asia-Tashkent(305),
|
|
asia-Tbilisi(306),
|
|
asia-Tehran(307),
|
|
asia-TelAviv(308),
|
|
asia-Thimbu(309),
|
|
asia-Thimphu(310),
|
|
asia-Tokyo(311),
|
|
asia-UjungPandang(312),
|
|
asia-Ulaanbaatar(313),
|
|
asia-UlanBator(314),
|
|
asia-Urumqi(315),
|
|
asia-Vientiane(316),
|
|
asia-Vladivostok(317),
|
|
asia-Yakutsk(318),
|
|
asia-Yekaterinburg(319),
|
|
asia-Yerevan(320),
|
|
atlantic-Azores(321),
|
|
atlantic-Bermuda(322),
|
|
atlantic-Canary(323),
|
|
atlantic-CapeVerde(324),
|
|
atlantic-Faeroe(325),
|
|
atlantic-JanMayen(326),
|
|
atlantic-Madeira(327),
|
|
atlantic-Reykjavik(328),
|
|
atlantic-SouthGeorgia(329),
|
|
atlantic-StHelena(330),
|
|
atlantic-Stanley(331),
|
|
australia-ACT(332),
|
|
australia-Adelaide(333),
|
|
australia-Brisbane(334),
|
|
australia-BrokenHill(335),
|
|
australia-Canberra(336),
|
|
australia-Currie(337),
|
|
australia-Darwin(338),
|
|
australia-Hobart(339),
|
|
australia-LHI(340),
|
|
australia-Lindeman(341),
|
|
australia-LordHowe(342),
|
|
australia-Melbourne(343),
|
|
australia-NSW(344),
|
|
australia-North(345),
|
|
australia-Perth(346),
|
|
australia-Queensland(347),
|
|
australia-South(348),
|
|
australia-Sydney(349),
|
|
australia-Tasmania(350),
|
|
australia-Victoria(351),
|
|
australia-West(352),
|
|
australia-Yancowinna(353),
|
|
brazil-Acre(354),
|
|
brazil-DeNoronha(355),
|
|
brazil-East(356),
|
|
brazil-West(357),
|
|
canada-Atlantic(358),
|
|
canada-Central(359),
|
|
canada-EastSaskatchewan(360),
|
|
canada-Eastern(361),
|
|
canada-Mountain(362),
|
|
canada-Newfoundland(363),
|
|
canada-Pacific(364),
|
|
canada-Saskatchewan(365),
|
|
canada-Yukon(366),
|
|
chile-Continental(367),
|
|
chile-EasterIsland(368),
|
|
etc-GMT(369),
|
|
etc-GMTE0(370),
|
|
etc-GMTE1(371),
|
|
etc-GMTE10(372),
|
|
etc-GMTE11(373),
|
|
etc-GMTE12(374),
|
|
etc-GMTE2(375),
|
|
etc-GMTE3(376),
|
|
etc-GMTE4(377),
|
|
etc-GMTE5(378),
|
|
etc-GMTE6(379),
|
|
etc-GMTE7(380),
|
|
etc-GMTE8(381),
|
|
etc-GMTE9(382),
|
|
etc-GMTW0(383),
|
|
etc-GMTW1(384),
|
|
etc-GMTW10(385),
|
|
etc-GMTW11(386),
|
|
etc-GMTW12(387),
|
|
etc-GMTW13(388),
|
|
etc-GMTW14(389),
|
|
etc-GMTW2(390),
|
|
etc-GMTW3(391),
|
|
etc-GMTW4(392),
|
|
etc-GMTW5(393),
|
|
etc-GMTW6(394),
|
|
etc-GMTW7(395),
|
|
etc-GMTW8(396),
|
|
etc-GMTW9(397),
|
|
etc-GMT0(398),
|
|
etc-Greenwich(399),
|
|
etc-UCT(400),
|
|
etc-UTC(401),
|
|
etc-Universal(402),
|
|
etc-Zulu(403),
|
|
europe-Amsterdam(404),
|
|
europe-Andorra(405),
|
|
europe-Athens(406),
|
|
europe-Belfast(407),
|
|
europe-Belgrade(408),
|
|
europe-Berlin(409),
|
|
europe-Bratislava(410),
|
|
europe-Brussels(411),
|
|
europe-Bucharest(412),
|
|
europe-Budapest(413),
|
|
europe-Chisinau(414),
|
|
europe-Copenhagen(415),
|
|
europe-Dublin(416),
|
|
europe-Gibraltar(417),
|
|
europe-Guernsey(418),
|
|
europe-Helsinki(419),
|
|
europe-IsleOfMan(420),
|
|
europe-Istanbul(421),
|
|
europe-Jersey(422),
|
|
europe-Kaliningrad(423),
|
|
europe-Kiev(424),
|
|
europe-Lisbon(425),
|
|
europe-Ljubljana(426),
|
|
europe-London(427),
|
|
europe-Luxembourg(428),
|
|
europe-Madrid(429),
|
|
europe-Malta(430),
|
|
europe-Mariehamn(431),
|
|
europe-Minsk(432),
|
|
europe-Monaco(433),
|
|
europe-Moscow(434),
|
|
europe-Nicosia(435),
|
|
europe-Oslo(436),
|
|
europe-Paris(437),
|
|
europe-Prague(438),
|
|
europe-Riga(439),
|
|
europe-Rome(440),
|
|
europe-Samara(441),
|
|
europe-SanMarino(442),
|
|
europe-Sarajevo(443),
|
|
europe-Simferopol(444),
|
|
europe-Skopje(445),
|
|
europe-Sofia(446),
|
|
europe-Stockholm(447),
|
|
europe-Tallinn(448),
|
|
europe-Tirane(449),
|
|
europe-Tiraspol(450),
|
|
europe-Uzhgorod(451),
|
|
europe-Vaduz(452),
|
|
europe-Vatican(453),
|
|
europe-Vienna(454),
|
|
europe-Vilnius(455),
|
|
europe-Volgograd(456),
|
|
europe-Warsaw(457),
|
|
europe-Zagreb(458),
|
|
europe-Zaporozhye(459),
|
|
europe-Zurich(460),
|
|
indian-Antananarivo(461),
|
|
indian-Chagos(462),
|
|
indian-Christmas(463),
|
|
indian-Cocos(464),
|
|
indian-Comoro(465),
|
|
indian-Kerguelen(466),
|
|
indian-Mahe(467),
|
|
indian-Maldives(468),
|
|
indian-Mauritius(469),
|
|
indian-Mayotte(470),
|
|
indian-Reunion(471),
|
|
mexico-BajaNorte(472),
|
|
mexico-BajaSur(473),
|
|
mexico-General(474),
|
|
mideast-Riyadh87(475),
|
|
mideast-Riyadh88(476),
|
|
mideast-Riyadh89(477),
|
|
pacific-Apia(478),
|
|
pacific-Auckland(479),
|
|
pacific-Chatham(480),
|
|
pacific-Easter(481),
|
|
pacific-Efate(482),
|
|
pacific-Enderbury(483),
|
|
pacific-Fakaofo(484),
|
|
pacific-Fiji(485),
|
|
pacific-Funafuti(486),
|
|
pacific-Galapagos(487),
|
|
pacific-Gambier(488),
|
|
pacific-Guadalcanal(489),
|
|
pacific-Guam(490),
|
|
pacific-Honolulu(491),
|
|
pacific-Johnston(492),
|
|
pacific-Kiritimati(493),
|
|
pacific-Kosrae(494),
|
|
pacific-Kwajalein(495),
|
|
pacific-Majuro(496),
|
|
pacific-Marquesas(497),
|
|
pacific-Midway(498),
|
|
pacific-Nauru(499),
|
|
pacific-Niue(500),
|
|
pacific-Norfolk(501),
|
|
pacific-Noumea(502),
|
|
pacific-PagoPago(503),
|
|
pacific-Palau(504),
|
|
pacific-Pitcairn(505),
|
|
pacific-Ponape(506),
|
|
pacific-PortMoresby(507),
|
|
pacific-Rarotonga(508),
|
|
pacific-Saipan(509),
|
|
pacific-Samoa(510),
|
|
pacific-Tahiti(511),
|
|
pacific-Tarawa(512),
|
|
pacific-Tongatapu(513),
|
|
pacific-Truk(514),
|
|
pacific-Wake(515),
|
|
pacific-Wallis(516),
|
|
pacific-Yap(517),
|
|
us-Alaska(518),
|
|
us-Aleutian(519),
|
|
us-Arizona(520),
|
|
us-Central(521),
|
|
us-EastIndiana(522),
|
|
us-Eastern(523),
|
|
us-Hawaii(524),
|
|
us-IndianaStarke(525),
|
|
us-Michigan(526),
|
|
us-Mountain(527),
|
|
us-Pacific(528),
|
|
us-PacificNew(529),
|
|
us-Samoa(530),
|
|
america-Argentina-BuenosAires(531),
|
|
america-Argentina-Catamarca(532),
|
|
america-Argentina-ComodRivadavia(533),
|
|
america-Argentina-Cordoba(534),
|
|
america-Argentina-Jujuy(535),
|
|
america-Argentina-LaRioja(536),
|
|
america-Argentina-Mendoza(537),
|
|
america-Argentina-RioGallegos(538),
|
|
america-Argentina-SanJuan(539),
|
|
america-Argentina-Tucuman(540),
|
|
america-Argentina-Ushuaia(541),
|
|
america-Indiana-Indianapolis(542),
|
|
america-Indiana-Knox(543),
|
|
america-Indiana-Marengo(544),
|
|
america-Indiana-Petersburg(545),
|
|
america-Indiana-Vevay(546),
|
|
america-Indiana-Vincennes(547),
|
|
america-Kentucky-Louisville(548),
|
|
america-Kentucky-Monticello(549),
|
|
america-NorthDakota-Center(550),
|
|
america-NorthDakota-NewSalem(551)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Timezone values. Since + is not a valid character inside enum
|
|
declaration, E(ast) and W(est) are used to indicate + and -
|
|
respectively. For example, etc-GMTE1 indicates Etc-GMT+1 and
|
|
etc-GMTW1 indicates Etc-GMT-1."
|
|
::= { rcUserSetTime 7 }
|
|
|
|
-- rcL2Redundancy Group
|
|
|
|
rcL2RedundancyHaCpuState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
initialization(0),
|
|
oneWayActive(1),
|
|
twoWayActive(2),
|
|
synchronized(3),
|
|
remoteIncompatible(4),
|
|
error(5),
|
|
disabled(6),
|
|
peerNotConnected(7),
|
|
peerConnected(8),
|
|
lostPeerConnection(9),
|
|
notSynchronized(10),
|
|
synchronizeInProgress(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the Ha-CPU state.
|
|
initialization - indicate the CPU is in this state.
|
|
oneWayActive - Modules that need to be
|
|
synchronized have registered with the framework (either
|
|
locally or a message was received from remote CPU (1).
|
|
twoWayActive - Modules that need to be synchronized have
|
|
registered with the framework (either locally or a message
|
|
was received from remote CPU (2).
|
|
synchronized - Table based synchroniztion was completed
|
|
on the current CPU (3).
|
|
remoteIncompatible - CPUs framework version is incompatible
|
|
with the remote CPU (4).
|
|
error - If an invalid event is generated in a given state the
|
|
CPU enters Error state (5).
|
|
disabled - High Availability is not enabled (6).
|
|
peerNotConnected - no peer connection is established (7).
|
|
peerConnected - peer connection is established (8).
|
|
lostPeerConnection - lost connection to peer/Standby CPU (9).
|
|
notSynchronized - Table Sync is not complete (10).
|
|
synchronizeInProgress - Table Sync is in progress (11)."
|
|
::= { rcL2Redundancy 1 }
|
|
|
|
rcL2RedundancyHaEvent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
restart(0),
|
|
systemRegistrationDone(1),
|
|
tableSynchronizationDone(2),
|
|
versionIncompatible(3),
|
|
noEvent(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the Ha event status.
|
|
restart (0) - Causes the state machine to restart
|
|
systemRegistrationDone (1)- Causes the CPU to transfer to
|
|
One Way or Two Way Active state. Locally or message received
|
|
from remote CPU.
|
|
tableSynchronizationDone (2) - Causes the CPU to
|
|
transfer to Synchronized state.
|
|
versionIncompatible (3) - Causes the CPU to go to Remote
|
|
Incompatible state
|
|
noEvent (4) - Means no event has occured uptill now. "
|
|
::= { rcL2Redundancy 2 }
|
|
|
|
rcL2RedundancyEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate the feature enable/disable."
|
|
::= { rcL2Redundancy 3 }
|
|
|
|
rcL2RedundancyStandbyCpu OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hotStandbyCPU(1),
|
|
warmStandbyCPU(2),
|
|
standbyCPUNotPresent(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate if the L2 Redundancy is enabled on the standby CPU."
|
|
::= { rcL2Redundancy 4 }
|
|
|
|
|
|
-- Ntp Group
|
|
-- Ntp Global Information
|
|
|
|
rcNtpGlobal OBJECT IDENTIFIER ::= { rcNtp 1 }
|
|
|
|
rcNtpGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable NTP feature"
|
|
DEFVAL { false }
|
|
::= { rcNtpGlobal 1 }
|
|
|
|
rcNtpGlobalInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (10..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval between successive NTP updates in minutes."
|
|
DEFVAL { 15 }
|
|
::= { rcNtpGlobal 2 }
|
|
|
|
rcNtpGlobalManualSyncRequest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
requestSync(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to force the device to immediately attempt to
|
|
synchronize with the NTP servers. The value returned on a get is
|
|
always requestSync(1)."
|
|
::= { rcNtpGlobal 3 }
|
|
|
|
-- Ntp Server Table Information
|
|
|
|
rcNtpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcNtpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The NTP server table. This table lists the information
|
|
of a NTP server"
|
|
::= { rcNtp 2 }
|
|
|
|
rcNtpServerEntry OBJECT-TYPE
|
|
SYNTAX RcNtpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A NTP server table entry."
|
|
INDEX { rcNtpServerAddress }
|
|
::= { rcNtpServerTable 1 }
|
|
|
|
RcNtpServerEntry ::=
|
|
SEQUENCE {
|
|
rcNtpServerAddress IpAddress,
|
|
rcNtpServerEnable TruthValue,
|
|
rcNtpServerAuthentication TruthValue,
|
|
rcNtpServerKeyId INTEGER,
|
|
rcNtpServerAccessAttempts Counter32,
|
|
rcNtpServerAccessSuccess Counter32,
|
|
rcNtpServerAccessFailure Counter32,
|
|
rcNtpServerRowStatus RowStatus,
|
|
rcNtpServerStratum DisplayString,
|
|
rcNtpServerVersion DisplayString,
|
|
rcNtpServerRootDelay DisplayString,
|
|
rcNtpServerPrecision DisplayString,
|
|
rcNtpServerReachable DisplayString,
|
|
rcNtpServerSynchronized DisplayString,
|
|
rcNtpServerSourceIpAddr IpAddress
|
|
}
|
|
|
|
rcNtpServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Server IP address of NTP time source referred to in
|
|
this table entry."
|
|
::= { rcNtpServerEntry 1 }
|
|
|
|
rcNtpServerEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable this server for participation in
|
|
time update."
|
|
DEFVAL { true }
|
|
::= { rcNtpServerEntry 2 }
|
|
|
|
rcNtpServerAuthentication OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable the MD5 Authentication on this
|
|
serve."
|
|
DEFVAL { false }
|
|
::= { rcNtpServerEntry 3 }
|
|
|
|
rcNtpServerKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Public Key used to generate MD5 digest for this
|
|
server."
|
|
DEFVAL { 0 }
|
|
::= { rcNtpServerEntry 4 }
|
|
|
|
rcNtpServerAccessAttempts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of NTP requests sent to this server"
|
|
::= { rcNtpServerEntry 5 }
|
|
|
|
rcNtpServerAccessSuccess OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times this server was selected to
|
|
update the time"
|
|
::= { rcNtpServerEntry 6 }
|
|
|
|
rcNtpServerAccessFailure OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times this server was rejected from
|
|
updating the time"
|
|
::= { rcNtpServerEntry 7 }
|
|
|
|
rcNtpServerRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcNtpServerEntry 8 }
|
|
|
|
rcNtpServerStratum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Stratum of this server"
|
|
::= { rcNtpServerEntry 9 }
|
|
|
|
rcNtpServerVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NTP version of this server"
|
|
::= { rcNtpServerEntry 10 }
|
|
|
|
rcNtpServerRootDelay OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Root Delay of this server"
|
|
::= { rcNtpServerEntry 11 }
|
|
|
|
rcNtpServerPrecision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NTP precision of this server in seconds"
|
|
::= { rcNtpServerEntry 12 }
|
|
|
|
rcNtpServerReachable OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "NTP Reachability of this server"
|
|
::= { rcNtpServerEntry 13 }
|
|
|
|
rcNtpServerSynchronized OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Status of synchronization with this server"
|
|
::= { rcNtpServerEntry 14 }
|
|
|
|
rcNtpServerSourceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "source IP address for NTP packets."
|
|
::= { rcNtpServerEntry 15 }
|
|
|
|
-- Ntp Key Table Information
|
|
|
|
rcNtpKeyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcNtpKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The NTP key table. This table lists the private key
|
|
of the public key Id"
|
|
::= {rcNtp 3 }
|
|
|
|
rcNtpKeyEntry OBJECT-TYPE
|
|
SYNTAX RcNtpKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A NTP key table entry."
|
|
INDEX { rcNtpKeyId }
|
|
::= { rcNtpKeyTable 1 }
|
|
|
|
RcNtpKeyEntry ::=
|
|
SEQUENCE {
|
|
rcNtpKeyId INTEGER,
|
|
rcNtpKeySecret DisplayString,
|
|
rcNtpKeyRowStatus RowStatus,
|
|
rcNtpKeyType INTEGER
|
|
}
|
|
|
|
rcNtpKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Public Key used to generate MD5/SHA1 digest"
|
|
::= { rcNtpKeyEntry 1 }
|
|
|
|
rcNtpKeySecret OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Private Key used to generate MD5/SHA1 Digest"
|
|
::= { rcNtpKeyEntry 2 }
|
|
|
|
rcNtpKeyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcNtpKeyEntry 3 }
|
|
|
|
rcNtpKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
md5(1),
|
|
sha1(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key type: MD5 or SHA1"
|
|
DEFVAL { 1 }
|
|
::= { rcNtpKeyEntry 4 }
|
|
|
|
-- Stack Vlan Group Information
|
|
|
|
rcSvlanGlobal OBJECT IDENTIFIER ::= { rcSvlan 1 }
|
|
|
|
rcSvlanActiveLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Stacked Vlan active level."
|
|
DEFVAL { 0 }
|
|
::= { rcSvlanGlobal 1 }
|
|
|
|
|
|
-- Stacked Vlan Table Information
|
|
|
|
rcSvlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of possible levels and their corresponding ether type.
|
|
The number of entries is eight."
|
|
::= { rcSvlan 2 }
|
|
|
|
rcSvlanEntry OBJECT-TYPE
|
|
SYNTAX RcSvlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A Stacked Vlan table entry."
|
|
INDEX { rcSvlanId }
|
|
::= { rcSvlanTable 1 }
|
|
|
|
RcSvlanEntry ::=
|
|
SEQUENCE {
|
|
rcSvlanId INTEGER,
|
|
rcSvlanLevel Integer32,
|
|
rcSvlanEtherType Integer32
|
|
}
|
|
|
|
rcSvlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Row Index."
|
|
::= { rcSvlanEntry 1 }
|
|
|
|
rcSvlanLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that identifies the switch level associated
|
|
with this entry."
|
|
::= { rcSvlanEntry 2 }
|
|
|
|
rcSvlanEtherType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The ether type value is used for svlan tagging."
|
|
::= { rcSvlanEntry 3 }
|
|
|
|
-- Spoof Detect Table
|
|
|
|
rcVlanPortSpoofDetectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlanPortSpoofDetectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing spoof-detect block entries."
|
|
::= { rcVlan 16 }
|
|
|
|
rcVlanPortSpoofDetectEntry OBJECT-TYPE
|
|
SYNTAX RcVlanPortSpoofDetectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This entry, which contains port index, VLAN ID, IP address and
|
|
MAC address, is used to indicate which MAC address is starting IP-Spoof
|
|
attack and which gateway IP address is under attack."
|
|
INDEX { rcVlanPortSpoofDetectIndex }
|
|
::= { rcVlanPortSpoofDetectTable 1 }
|
|
|
|
RcVlanPortSpoofDetectEntry ::=
|
|
SEQUENCE{
|
|
rcVlanPortSpoofDetectIndex Unsigned32,
|
|
rcVlanPortSpoofDetectSpoofedIpAddressType InetAddressType,
|
|
rcVlanPortSpoofDetectSpoofedIpAddress InetAddress,
|
|
rcVlanPortSpoofDetectSpoofedMacAddress MacAddress,
|
|
rcVlanPortSpoofDetectPort Unsigned32,
|
|
rcVlanPortSpoofDetectVlanId Unsigned32
|
|
}
|
|
|
|
rcVlanPortSpoofDetectIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The auxiliary variable for identifying instances of
|
|
the columnar objects in the spoof detect table."
|
|
::= { rcVlanPortSpoofDetectEntry 1 }
|
|
|
|
rcVlanPortSpoofDetectSpoofedIpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address type of address under spoof attack."
|
|
::= { rcVlanPortSpoofDetectEntry 2 }
|
|
|
|
rcVlanPortSpoofDetectSpoofedIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address that has been detected under spoof attack."
|
|
::= { rcVlanPortSpoofDetectEntry 3 }
|
|
|
|
rcVlanPortSpoofDetectSpoofedMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAC address that has sent out spoofing ARP."
|
|
::= { rcVlanPortSpoofDetectEntry 4 }
|
|
|
|
rcVlanPortSpoofDetectPort OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port index that has enabled spoof-detect."
|
|
::= { rcVlanPortSpoofDetectEntry 5 }
|
|
|
|
rcVlanPortSpoofDetectVlanId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VLAN ID that has been detected under spoof attack."
|
|
::= { rcVlanPortSpoofDetectEntry 6}
|
|
|
|
|
|
-- rc2k Group
|
|
|
|
rc2kChassis OBJECT IDENTIFIER ::= { rc2k 1 }
|
|
|
|
rc2kChassisPortOperStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A bit array that contains the oper-status
|
|
of the ports in the device. 2 bits are used
|
|
for each port. The high order 2 bits of the
|
|
first octet represent port #0, the next two
|
|
bits are used for port #1, etc. The status
|
|
is encoded with the following scheme :
|
|
|
|
value meaning
|
|
----- -------
|
|
0 no-link (admin=up, oper=down)
|
|
1 up (admin=up, oper=up)
|
|
2 down (admin=down, oper=down)
|
|
3 testing (admin=test, oper=test)
|
|
"
|
|
::= { rc2kChassis 1 }
|
|
|
|
rc2kChassisTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the core operating temperature
|
|
of the chassis. This value represents the degree
|
|
in celsius of the air inside the chassis."
|
|
::= { rc2kChassis 2 }
|
|
|
|
rc2kChassisAmbientLowerTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the temperature of the air
|
|
entering the fan at the lower half of the chassis."
|
|
::= { rc2kChassis 3 }
|
|
|
|
rc2kChassisAmbientUpperTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to indicate the temperature of the air
|
|
entering the fan at the upper half of the chassis."
|
|
::= { rc2kChassis 4 }
|
|
|
|
rc2kChassisBaseMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "base mac addr"
|
|
::= { rc2kChassis 5 }
|
|
|
|
rc2kChassisMacAddrCapacity OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac Address Capacity"
|
|
::= { rc2kChassis 6 }
|
|
|
|
rc2kChassisPbtMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pbt mac addr"
|
|
::= { rc2kChassis 7 }
|
|
|
|
rc2kChassisUserLabel1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..89))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "user defined management information. This can be used to
|
|
provide extra information about the chassis. Syntax can be
|
|
as expected by the management system "
|
|
::= { rc2kChassis 8 }
|
|
|
|
rc2kChassisPbtMacAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..48))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of 8 Pbt Mac addresses. The first Pbt Mac Address
|
|
is rc2kChassisPbtMacAddr. The other 7 Pbt Mac Addresses
|
|
are derived by increment 1 to the previous mac sequencially
|
|
start from rc2kChassisPbtMacAddr"
|
|
::= { rc2kChassis 9}
|
|
|
|
rc2kChassisSystemTempLedColor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
green(1),
|
|
red(2),
|
|
amber(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the led color of the system temperature
|
|
which is under or above the threshold. The threshold is 60 degree
|
|
in celsius.
|
|
'green' menas normal. And temperature under threshold.
|
|
'red' means one of the zone temperature is above the threshold.
|
|
'amber' is the initial state, means device have not start to
|
|
chekc the temperature yet."
|
|
|
|
::= { rc2kChassis 10 }
|
|
|
|
rc2kChassisPortLedStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is applicable only for VSP4K.
|
|
A bit array that contains the value of port
|
|
LED status. One octet is used for each port.
|
|
Each octet contains two nibbles (two 4 bits).
|
|
From left to right, the first nibble (high order
|
|
4 bits) of the octet represent the Speed/InUse
|
|
LED, and the second nibble (lower order 4 bits) of
|
|
the octet represent the Link/Activity LED. Use the
|
|
ifIndex position. Start from 192th octet. Such 192th
|
|
octet for 1/1, 193 for 1/2, so on so forth.
|
|
The following shows the meaning for each bit (bit 0
|
|
is most significant bit):
|
|
|
|
bit meaning for Speed.
|
|
----- ------------------
|
|
0 reserved
|
|
1 blinking (POE delievring power)
|
|
2 amber (100 Mbps)
|
|
3 green (1000 Mbps)
|
|
-- No bit set (OFF) means 10 Mbps when activity led
|
|
is green.
|
|
bit meaning for activity
|
|
---- --------------------
|
|
4 reserved
|
|
5 blink (Green blink fast, Data activity.
|
|
Green blick slow, port disabled)
|
|
6 amber
|
|
7 green (link Up. No Data activity)
|
|
"
|
|
::= { rc2kChassis 11 }
|
|
|
|
rc2kChassisPortLed2Status OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is applicable only for VSP8200 & VSP8400.
|
|
Each octet string contains the value of a port LED status. One octet
|
|
is used for each port. Each octet contains two nibbles (two 4 bits).
|
|
From left to right, the first nibble (higher order 4 bits) of the
|
|
octet represents the Link/Activity LED (The left one of the two for
|
|
fiber port. Each copper port has only one LED). The second nibble
|
|
(lower order 4 bits) of the octet represents the Speed/InUse LED (The
|
|
right one of the two for fiber port). And use the ifIndex as the position
|
|
starting from 192th octet. Such 192th octet for 1/1, 193 for 1/2, so on
|
|
so forth.
|
|
|
|
The following shows the meaning for each nibbles:
|
|
|
|
first 4 bits value meaning for activity
|
|
-------------------- ------------------------------------------------------------
|
|
0 : port not valid or not present
|
|
1 Light Off : admin enabled & no link & no fault
|
|
on all channels
|
|
2 Slow Blinking Green : admin disable
|
|
or one or more channelized ports admin disable
|
|
3 Blinking Amber : remote fault on 10G/40G fiber port
|
|
4 Solid Amber : local fault on one or more
|
|
channels on 10G/40G/100G fiber port
|
|
5 Solid Green : link up & no activity on one or more
|
|
channels on 10G/40G/100G fiber port
|
|
: link up with 1G speed on 10G copper port
|
|
6 Solid Amber : link up with 100M speed on 10G copper port
|
|
7 Solid Blue : link up with 10G speed on 10G copper port
|
|
8 Random Blinking Green : link up & activity on one or more
|
|
channels on 10G/40G/100G fiber port
|
|
: activity with 1G speed on 10G copper port
|
|
9 Random Blinking Amber : activity with 100 speed on 10G copper port
|
|
10 Random Blinking Blue : activity with 10G speed on 10G copper port
|
|
|
|
second 4 bits value meaning for Speed.
|
|
------------------- ------------------------------------------------------------
|
|
0 : port not valid or not present
|
|
1 Blinking Green : 1G speed on 10G fiber port(SFP+)
|
|
2 Solid Green : 10G speed on 10G fiber port
|
|
: channelized on on 40G fiber port
|
|
: 1G speed on 1G port
|
|
3 Light Off : channelized off on 40G fiber port
|
|
: 10M speed on 1G port
|
|
4 Solid Amber : 100M speed on 1G port
|
|
|
|
"
|
|
::= { rc2kChassis 12 }
|
|
|
|
rc2kChassisPortLicenseStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(56))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is applicable only for VSP7K. The string is 56 octets long,
|
|
for a total of 448 bits. Each bit corresponds to a port, as represented
|
|
by its ifIndex value. When a bit is set (value 1), the corresponding
|
|
port is disabled by license and the port is not allowed to be enabled.
|
|
The encoding is such that the most significant bit of octet #1 corresponds
|
|
to ifIndex 0, while the least significant bit of octet #56 corresponds
|
|
to ifIndex 448."
|
|
|
|
::= { rc2kChassis 13 }
|
|
|
|
rc2kChassisPortLed3Status OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is applicable only for DSG9032 and DSG8064. For DSG9032, each 100G port
|
|
can operate with 100G pluggable module or channelized to 4 25G sub-ports,
|
|
or operate with 40G pluggable module or channelized to 4 10G sub-ports.
|
|
For DSG8064, no channelized and 40G x 64 ports.
|
|
Each octet string contains the value of a sub-port LED status. And use the
|
|
ifIndex as the position starting from 192th octet. Such 192th octet for 1/1/1,
|
|
193 for 1/1/2, 196 for 1/2/1, so on so forth.
|
|
|
|
The following shows the meaning for each byte:
|
|
|
|
byte value DSG9032 meaning for activity
|
|
---------- -------------------------------------------------------------------------
|
|
0 : port not valid or not present
|
|
1 Light Off : admin enabled without pluggable module
|
|
2 Slow Blinking Green : admin disable wtih/without 100G pluggable
|
|
3 Slow Blinking Amber : admin disable wtih 40G pluggable
|
|
4 Slow Blinking Blue : admin disable wtih 100G pluggable and channelized
|
|
5 Slow Blinking Pruple : admin disable wtih 40G pluggable and channelized
|
|
6 Solid Green : link up with 100G pluggable
|
|
7 Solid Amber : link up with 40G pluggable
|
|
8 Solid Blue : link up with 25G (channelized of 100G pluggable)
|
|
9 Solid Pruple : link up with 10G (channelized of 40G pluggable)
|
|
10 Random Blinking Green : link up & activity with 100G speed
|
|
11 Random Blinking Amber : link up & activity with 40G speed
|
|
12 Random Blinking Blue : link up & activity with 25G speed(channelized
|
|
of 100G pluggable)
|
|
13 Random Blinking Pruple : link up & activity with 10G speed(channelized
|
|
of 40G pluggable)
|
|
|
|
byte value DSG8064 meaning for activity
|
|
---------- -------------------------------------------------------------------------
|
|
0 : port not valid or not present
|
|
1 Light Off : admin enabled without pluggable module
|
|
2 Slow Blinking Green : admin disable wtih/without 40G pluggable
|
|
6 Solid Green : link up with 40G pluggable
|
|
7 Solid Amber : local fault
|
|
10 Random Blinking Green : link up & activity with 40G speed
|
|
11 Random Blinking Amber : remote fault
|
|
"
|
|
::= { rc2kChassis 14 }
|
|
|
|
-- 2k CPU Ethernet Port table
|
|
|
|
rc2kCpuEthernetPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kCpuEthernetPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k CPU Ethernet Port table"
|
|
::= { rc2k 2 }
|
|
|
|
rc2kCpuEthernetPortEntry OBJECT-TYPE
|
|
SYNTAX Rc2kCpuEthernetPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 2k CPU Ethernet Port"
|
|
INDEX { rc2kCpuEthernetPortIfIndex }
|
|
::= { rc2kCpuEthernetPortTable 1 }
|
|
|
|
Rc2kCpuEthernetPortEntry ::= SEQUENCE {
|
|
rc2kCpuEthernetPortIfIndex InterfaceIndex,
|
|
rc2kCpuEthernetPortDescr DisplayString,
|
|
rc2kCpuEthernetPortAdminStatus INTEGER,
|
|
rc2kCpuEthernetPortOperStatus INTEGER,
|
|
rc2kCpuEthernetPortAddr IpAddress,
|
|
rc2kCpuEthernetPortMask IpAddress,
|
|
rc2kCpuEthernetPortGateway IpAddress,
|
|
rc2kCpuEthernetPortNetwork IpAddress,
|
|
rc2kCpuEthernetPortAutoNegotiate TruthValue,
|
|
rc2kCpuEthernetPortAdminDuplex INTEGER,
|
|
rc2kCpuEthernetPortOperDuplex INTEGER,
|
|
rc2kCpuEthernetPortAdminSpeed INTEGER,
|
|
rc2kCpuEthernetPortOperSpeed INTEGER,
|
|
rc2kCpuEthernetPortEnableBootp TruthValue,
|
|
rc2kCpuEthernetPortMgmtMacAddr MacAddress
|
|
}
|
|
|
|
rc2kCpuEthernetPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IfIndex of the port."
|
|
::= { rc2kCpuEthernetPortEntry 1 }
|
|
|
|
rc2kCpuEthernetPortDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port description"
|
|
::= { rc2kCpuEthernetPortEntry 2 }
|
|
|
|
rc2kCpuEthernetPortAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the admininstrative status
|
|
of the port."
|
|
::= { rc2kCpuEthernetPortEntry 3 }
|
|
|
|
rc2kCpuEthernetPortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the administrative status
|
|
of the port."
|
|
::= { rc2kCpuEthernetPortEntry 4 }
|
|
|
|
rc2kCpuEthernetPortAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the port's IP address"
|
|
::= { rc2kCpuEthernetPortEntry 5 }
|
|
|
|
rc2kCpuEthernetPortMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the port's net mask"
|
|
::= { rc2kCpuEthernetPortEntry 6 }
|
|
|
|
rc2kCpuEthernetPortGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the the IP address of the
|
|
gateway that should be used to forward IP
|
|
traffic."
|
|
::= { rc2kCpuEthernetPortEntry 7 }
|
|
|
|
rc2kCpuEthernetPortNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the network that can be
|
|
used to remotely manage this device."
|
|
::= { rc2kCpuEthernetPortEntry 8 }
|
|
|
|
rc2kCpuEthernetPortAutoNegotiate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure auto-negotiation on this
|
|
port."
|
|
DEFVAL { true }
|
|
::= { rc2kCpuEthernetPortEntry 9 }
|
|
|
|
rc2kCpuEthernetPortAdminDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
half(1),
|
|
full(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the administrative duplex
|
|
setting for this port."
|
|
::= { rc2kCpuEthernetPortEntry 10 }
|
|
|
|
rc2kCpuEthernetPortOperDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
half(1),
|
|
full(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the operational duplex
|
|
setting for this port."
|
|
::= { rc2kCpuEthernetPortEntry 11 }
|
|
|
|
rc2kCpuEthernetPortAdminSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
mbps10(1), -- 10Mb/s
|
|
mbps100(2) -- 100Mb/s
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the administrative speed
|
|
setting for this port."
|
|
::= { rc2kCpuEthernetPortEntry 12 }
|
|
|
|
rc2kCpuEthernetPortOperSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
mbps10(1), -- 10Mb/s
|
|
mbps100(2), -- 100Mb/s
|
|
mbps1000(3) -- 1000Mb/s
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the operational duplex
|
|
setting for this port."
|
|
::= { rc2kCpuEthernetPortEntry 13 }
|
|
|
|
rc2kCpuEthernetPortEnableBootp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable the Bootp feature
|
|
on this port."
|
|
DEFVAL { false }
|
|
::= { rc2kCpuEthernetPortEntry 14 }
|
|
|
|
rc2kCpuEthernetPortMgmtMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the mac addr for this port."
|
|
::= { rc2kCpuEthernetPortEntry 15 }
|
|
|
|
-- 2k CPU Serial Port table
|
|
|
|
rc2kCpuSerialPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kCpuSerialPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k CPU Serial Port table"
|
|
::= { rc2k 3 }
|
|
|
|
rc2kCpuSerialPortEntry OBJECT-TYPE
|
|
SYNTAX Rc2kCpuSerialPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 2k CPU Serial Port"
|
|
INDEX { rc2kCpuSerialPortIfIndex }
|
|
::= { rc2kCpuSerialPortTable 1 }
|
|
|
|
Rc2kCpuSerialPortEntry ::= SEQUENCE {
|
|
rc2kCpuSerialPortIfIndex InterfaceIndex,
|
|
rc2kCpuSerialPortDescr DisplayString,
|
|
rc2kCpuSerialPortMode INTEGER,
|
|
rc2kCpuSerialPortAdminStatus INTEGER,
|
|
rc2kCpuSerialPortOperStatus INTEGER,
|
|
rc2kCpuSerialPortBaudRate INTEGER,
|
|
rc2kCpuSerialPortDataBits INTEGER,
|
|
rc2kCpuSerialPortMyAddr IpAddress,
|
|
rc2kCpuSerialPortPeerAddr IpAddress,
|
|
rc2kCpuSerialPortSlipMtu INTEGER,
|
|
rc2kCpuSerialPortSlipTxRxCompress TruthValue,
|
|
rc2kCpuSerialPortSlipRxCompress TruthValue,
|
|
rc2kCpuSerialPortPppConfigFile OCTET STRING
|
|
}
|
|
|
|
rc2kCpuSerialPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IfIndex for this port."
|
|
::= { rc2kCpuSerialPortEntry 1 }
|
|
|
|
rc2kCpuSerialPortDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port description."
|
|
::= { rc2kCpuSerialPortEntry 2 }
|
|
|
|
rc2kCpuSerialPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
cli(1),
|
|
slip(2),
|
|
ppp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the mode this port should
|
|
operate in."
|
|
::= { rc2kCpuSerialPortEntry 3 }
|
|
|
|
rc2kCpuSerialPortAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the administrative status
|
|
setting for this port."
|
|
::= { rc2kCpuSerialPortEntry 4 }
|
|
|
|
rc2kCpuSerialPortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the operational status
|
|
setting for this port."
|
|
::= { rc2kCpuSerialPortEntry 5 }
|
|
|
|
rc2kCpuSerialPortBaudRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
baud2400(2400),
|
|
baud4800(4800),
|
|
baud9600(9600),
|
|
baud19200(19200),
|
|
baud38400(38400),
|
|
baud57600(57600),
|
|
baud115200(115200)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the baud rate of this port."
|
|
::= { rc2kCpuSerialPortEntry 6 }
|
|
|
|
rc2kCpuSerialPortDataBits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
seven(1),
|
|
eight(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the number of data bits, per
|
|
byte of data, this port should send/receive."
|
|
::= { rc2kCpuSerialPortEntry 7 }
|
|
|
|
rc2kCpuSerialPortMyAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure this port's IP address.
|
|
Used for both 'slip' and 'ppp' modes."
|
|
::= { rc2kCpuSerialPortEntry 8 }
|
|
|
|
rc2kCpuSerialPortPeerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the peer's IP address.
|
|
Used for both 'slip' and 'ppp' modes."
|
|
::= { rc2kCpuSerialPortEntry 9 }
|
|
|
|
rc2kCpuSerialPortSlipMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (0..224)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the MTU for this port.
|
|
Used for slip only."
|
|
::= { rc2kCpuSerialPortEntry 10 }
|
|
|
|
rc2kCpuSerialPortSlipTxRxCompress OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable compression of TCP/IP
|
|
packet headers on this port. Used for slip only."
|
|
DEFVAL { true }
|
|
::= { rc2kCpuSerialPortEntry 11 }
|
|
|
|
rc2kCpuSerialPortSlipRxCompress OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable compression for receiving
|
|
packets on this port. Used for slip only."
|
|
DEFVAL { true }
|
|
::= { rc2kCpuSerialPortEntry 12 }
|
|
|
|
rc2kCpuSerialPortPppConfigFile OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the configuration file to use
|
|
for PPP."
|
|
::= { rc2kCpuSerialPortEntry 13 }
|
|
|
|
|
|
-- 2k Device Group
|
|
|
|
rc2kDevice OBJECT IDENTIFIER ::= { rc2k 4 }
|
|
|
|
rc2kDeviceGlobalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kDeviceGlobalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k CPU Ethernet Port table"
|
|
::= { rc2kDevice 1 }
|
|
|
|
rc2kDeviceGlobalEntry OBJECT-TYPE
|
|
SYNTAX Rc2kDeviceGlobalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 2k CPU Ethernet Port"
|
|
INDEX { rc2kDeviceGlobalSlot }
|
|
::= { rc2kDeviceGlobalTable 1 }
|
|
|
|
Rc2kDeviceGlobalEntry ::= SEQUENCE {
|
|
rc2kDeviceGlobalSlot INTEGER,
|
|
rc2kDeviceGlobalFlashBytesUsed Integer32,
|
|
rc2kDeviceGlobalFlashBytesFree Integer32,
|
|
rc2kDeviceGlobalFlashNumFiles Integer32,
|
|
rc2kDeviceGlobalPcmciaBytesUsed Integer32,
|
|
rc2kDeviceGlobalPcmciaBytesFree Integer32,
|
|
rc2kDeviceGlobalPcmciaNumFiles Integer32,
|
|
rc2kDeviceGlobalAction INTEGER,
|
|
rc2kDeviceGlobalResult INTEGER,
|
|
rc2kDeviceGlobalFlash1BytesUsed Integer32,
|
|
rc2kDeviceGlobalFlash1BytesFree Integer32,
|
|
rc2kDeviceGlobalFlash1NumFiles Integer32,
|
|
rc2kDeviceGlobalUsbBytesUsed Counter64,
|
|
rc2kDeviceGlobalUsbBytesFree Counter64,
|
|
rc2kDeviceGlobalUsbNumFiles Integer32,
|
|
rc2kDeviceGlobalExtflashBytesUsed Counter64,
|
|
rc2kDeviceGlobalExtflashBytesFree Counter64,
|
|
rc2kDeviceGlobalExtflashNumFiles Integer32,
|
|
rc2kDeviceGlobalIntflashBytesUsed Counter64,
|
|
rc2kDeviceGlobalIntflashBytesFree Counter64
|
|
}
|
|
|
|
rc2kDeviceGlobalSlot OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3 | 5..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot number"
|
|
::= { rc2kDeviceGlobalEntry 1 }
|
|
|
|
rc2kDeviceGlobalFlashBytesUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes used"
|
|
::= { rc2kDeviceGlobalEntry 2 }
|
|
|
|
rc2kDeviceGlobalFlashBytesFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes free"
|
|
::= { rc2kDeviceGlobalEntry 3 }
|
|
|
|
rc2kDeviceGlobalFlashNumFiles OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "# files in flash"
|
|
::= { rc2kDeviceGlobalEntry 4 }
|
|
|
|
rc2kDeviceGlobalPcmciaBytesUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes used"
|
|
::= { rc2kDeviceGlobalEntry 5 }
|
|
|
|
rc2kDeviceGlobalPcmciaBytesFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes free"
|
|
::= { rc2kDeviceGlobalEntry 6 }
|
|
|
|
rc2kDeviceGlobalPcmciaNumFiles OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "# files in pcmcia"
|
|
::= { rc2kDeviceGlobalEntry 7 }
|
|
|
|
rc2kDeviceGlobalAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
resetPcmcia(2),
|
|
pcmciaStop(3),
|
|
pcmciaStart(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "none(1), resetPcmcia(2), .."
|
|
::= { rc2kDeviceGlobalEntry 8 }
|
|
|
|
rc2kDeviceGlobalResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
inProgress(2),
|
|
success(3),
|
|
fail(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the result of the last action
|
|
performed on one of the system's device."
|
|
::= { rc2kDeviceGlobalEntry 9 }
|
|
|
|
rc2kDeviceGlobalFlash1BytesUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes used"
|
|
::= { rc2kDeviceGlobalEntry 10 }
|
|
|
|
rc2kDeviceGlobalFlash1BytesFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes free"
|
|
::= { rc2kDeviceGlobalEntry 11 }
|
|
|
|
rc2kDeviceGlobalFlash1NumFiles OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "# files in flash"
|
|
::= { rc2kDeviceGlobalEntry 12 }
|
|
|
|
rc2kDeviceGlobalUsbBytesUsed OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes used in USB"
|
|
::= { rc2kDeviceGlobalEntry 13 }
|
|
|
|
rc2kDeviceGlobalUsbBytesFree OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes free in USB"
|
|
::= { rc2kDeviceGlobalEntry 14 }
|
|
|
|
rc2kDeviceGlobalUsbNumFiles OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "# files in USB"
|
|
::= { rc2kDeviceGlobalEntry 15 }
|
|
|
|
rc2kDeviceGlobalExtflashBytesUsed OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes used in Extflash"
|
|
::= { rc2kDeviceGlobalEntry 16 }
|
|
|
|
rc2kDeviceGlobalExtflashBytesFree OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes free in Extflash"
|
|
::= { rc2kDeviceGlobalEntry 17 }
|
|
|
|
rc2kDeviceGlobalExtflashNumFiles OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "# files in Extflash"
|
|
::= { rc2kDeviceGlobalEntry 18 }
|
|
|
|
rc2kDeviceGlobalIntflashBytesUsed OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes used in intflash. It is used to
|
|
replace rc2kDeviceGlobalFlashBytesUsed"
|
|
::= { rc2kDeviceGlobalEntry 19 }
|
|
|
|
rc2kDeviceGlobalIntflashBytesFree OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bytes free in intflash. It is used to
|
|
replace rc2kDeviceGlobalFlashByteFree"
|
|
::= { rc2kDeviceGlobalEntry 20 }
|
|
|
|
-- 2k Device Separator1
|
|
|
|
rc2kDeviceSeparator1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This leaf is used to provide a separation between
|
|
tables. No meaningful information is stored in this
|
|
variable."
|
|
::= { rc2kDevice 2 }
|
|
|
|
|
|
-- 2k Device Intflash File table
|
|
|
|
rc2kDeviceFlashFileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kDeviceFlashFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k Flash table"
|
|
::= { rc2kDevice 3 }
|
|
|
|
rc2kDeviceFlashFileEntry OBJECT-TYPE
|
|
SYNTAX Rc2kDeviceFlashFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 2k CPU Serial Port"
|
|
INDEX { rc2kDeviceFlashFileSlot,
|
|
IMPLIED rc2kDeviceFlashFileName }
|
|
::= { rc2kDeviceFlashFileTable 1 }
|
|
|
|
Rc2kDeviceFlashFileEntry ::= SEQUENCE {
|
|
rc2kDeviceFlashFileSlot INTEGER,
|
|
rc2kDeviceFlashFileName DisplayString,
|
|
rc2kDeviceFlashFileDate DisplayString,
|
|
rc2kDeviceFlashFileSize Integer32
|
|
}
|
|
|
|
rc2kDeviceFlashFileSlot OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot number"
|
|
::= { rc2kDeviceFlashFileEntry 1 }
|
|
|
|
rc2kDeviceFlashFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..114))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "name of file"
|
|
::= { rc2kDeviceFlashFileEntry 2 }
|
|
|
|
rc2kDeviceFlashFileDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "date"
|
|
::= { rc2kDeviceFlashFileEntry 3 }
|
|
|
|
rc2kDeviceFlashFileSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "size in bytes"
|
|
::= { rc2kDeviceFlashFileEntry 4 }
|
|
|
|
-- 2k Device Pcmcia present
|
|
|
|
rc2kDevicePcmciaPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pcmcia is a slower device. This leaf is used to
|
|
stop the access into pcmcia file table when it
|
|
got the end of flash file table."
|
|
::= { rc2kDevice 4 }
|
|
|
|
-- 2k Device Pcmcia File table
|
|
|
|
rc2kDevicePcmciaFileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kDevicePcmciaFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k PCMCIA table"
|
|
::= { rc2kDevice 5 }
|
|
|
|
rc2kDevicePcmciaFileEntry OBJECT-TYPE
|
|
SYNTAX Rc2kDevicePcmciaFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 2k CPU Serial Port"
|
|
INDEX { rc2kDevicePcmciaFileSlot,
|
|
IMPLIED rc2kDevicePcmciaFileName }
|
|
::= { rc2kDevicePcmciaFileTable 1 }
|
|
|
|
Rc2kDevicePcmciaFileEntry ::= SEQUENCE {
|
|
rc2kDevicePcmciaFileSlot INTEGER,
|
|
rc2kDevicePcmciaFileName DisplayString,
|
|
rc2kDevicePcmciaFileDate DisplayString,
|
|
rc2kDevicePcmciaFileSize Integer32
|
|
}
|
|
|
|
rc2kDevicePcmciaFileSlot OBJECT-TYPE
|
|
SYNTAX INTEGER (3 | 5..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot number"
|
|
::= { rc2kDevicePcmciaFileEntry 1 }
|
|
|
|
rc2kDevicePcmciaFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..114))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "name of file"
|
|
::= { rc2kDevicePcmciaFileEntry 2 }
|
|
|
|
rc2kDevicePcmciaFileDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "date"
|
|
::= { rc2kDevicePcmciaFileEntry 3 }
|
|
|
|
rc2kDevicePcmciaFileSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "size in bytes"
|
|
::= { rc2kDevicePcmciaFileEntry 4 }
|
|
|
|
-- 2k Device Separator2
|
|
|
|
rc2kDeviceSeparator2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This leaf is used to provide a separation between
|
|
tables. No meaningful information is stored in this
|
|
variable."
|
|
::= { rc2kDevice 6 }
|
|
|
|
-- 2k Device Flash1 present
|
|
|
|
rc2kDeviceFlash1Present OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This leaf is used to stop the access into Flash1
|
|
file table."
|
|
::= { rc2kDevice 7 }
|
|
|
|
-- 2k Device Flash1 File table
|
|
|
|
rc2kDeviceFlash1FileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kDeviceFlash1FileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k Flash1 table"
|
|
::= { rc2kDevice 8 }
|
|
|
|
rc2kDeviceFlash1FileEntry OBJECT-TYPE
|
|
SYNTAX Rc2kDeviceFlash1FileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing infomation of 2k Flash1 Files"
|
|
INDEX { rc2kDeviceFlash1FileSlot, rc2kDeviceFlash1FileName }
|
|
::= { rc2kDeviceFlash1FileTable 1 }
|
|
|
|
Rc2kDeviceFlash1FileEntry ::= SEQUENCE {
|
|
rc2kDeviceFlash1FileSlot INTEGER,
|
|
rc2kDeviceFlash1FileName DisplayString,
|
|
rc2kDeviceFlash1FileDate DisplayString,
|
|
rc2kDeviceFlash1FileSize Integer32
|
|
}
|
|
|
|
rc2kDeviceFlash1FileSlot OBJECT-TYPE
|
|
SYNTAX INTEGER (5..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot number"
|
|
::= { rc2kDeviceFlash1FileEntry 1 }
|
|
|
|
rc2kDeviceFlash1FileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "name of file"
|
|
::= { rc2kDeviceFlash1FileEntry 2 }
|
|
|
|
rc2kDeviceFlash1FileDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "date"
|
|
::= { rc2kDeviceFlash1FileEntry 3 }
|
|
|
|
rc2kDeviceFlash1FileSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "size in bytes"
|
|
::= { rc2kDeviceFlash1FileEntry 4 }
|
|
|
|
-- 2k Device Extflash File table
|
|
|
|
rc2kDeviceExtflashFileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kDeviceExtflashFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k Flash table"
|
|
::= { rc2kDevice 9}
|
|
|
|
rc2kDeviceExtflashFileEntry OBJECT-TYPE
|
|
SYNTAX Rc2kDeviceExtflashFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of extflash files"
|
|
INDEX { rc2kDeviceExtflashFileSlot,
|
|
IMPLIED rc2kDeviceExtflashFileName }
|
|
::= { rc2kDeviceExtflashFileTable 1 }
|
|
|
|
Rc2kDeviceExtflashFileEntry ::= SEQUENCE {
|
|
rc2kDeviceExtflashFileSlot Integer32,
|
|
rc2kDeviceExtflashFileName DisplayString,
|
|
rc2kDeviceExtflashFileDate DisplayString,
|
|
rc2kDeviceExtflashFileSize Unsigned32
|
|
}
|
|
|
|
rc2kDeviceExtflashFileSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "slot number"
|
|
::= { rc2kDeviceExtflashFileEntry 1 }
|
|
|
|
rc2kDeviceExtflashFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..114))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "name of file"
|
|
::= { rc2kDeviceExtflashFileEntry 2 }
|
|
|
|
rc2kDeviceExtflashFileDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "date"
|
|
::= { rc2kDeviceExtflashFileEntry 3 }
|
|
|
|
rc2kDeviceExtflashFileSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "size in bytes"
|
|
::= { rc2kDeviceExtflashFileEntry 4 }
|
|
|
|
-- 2k Device USB File table
|
|
|
|
rc2kDeviceUsbFileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kDeviceUsbFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k Usb table"
|
|
::= { rc2kDevice 10 }
|
|
|
|
rc2kDeviceUsbFileEntry OBJECT-TYPE
|
|
SYNTAX Rc2kDeviceUsbFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of USB files"
|
|
INDEX { rc2kDeviceUsbFileSlot,
|
|
IMPLIED rc2kDeviceUsbFileName }
|
|
::= { rc2kDeviceUsbFileTable 1 }
|
|
|
|
Rc2kDeviceUsbFileEntry ::= SEQUENCE {
|
|
rc2kDeviceUsbFileSlot Integer32,
|
|
rc2kDeviceUsbFileName DisplayString,
|
|
rc2kDeviceUsbFileDate DisplayString,
|
|
rc2kDeviceUsbFileSize Unsigned32
|
|
}
|
|
|
|
rc2kDeviceUsbFileSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "slot number"
|
|
::= { rc2kDeviceUsbFileEntry 1 }
|
|
|
|
rc2kDeviceUsbFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..114))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "name of file"
|
|
::= { rc2kDeviceUsbFileEntry 2 }
|
|
|
|
rc2kDeviceUsbFileDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "date"
|
|
::= { rc2kDeviceUsbFileEntry 3 }
|
|
|
|
rc2kDeviceUsbFileSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "size in bytes"
|
|
::= { rc2kDeviceUsbFileEntry 4 }
|
|
|
|
|
|
-- 2k Boot Config Table
|
|
|
|
rc2kBootConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kBootConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k Boot Configuration table"
|
|
::= { rc2k 5 }
|
|
|
|
rc2kBootConfigEntry OBJECT-TYPE
|
|
SYNTAX Rc2kBootConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing boot configuration information."
|
|
INDEX { rc2kBootConfigSlot }
|
|
::= { rc2kBootConfigTable 1 }
|
|
|
|
Rc2kBootConfigEntry ::= SEQUENCE {
|
|
rc2kBootConfigSlot INTEGER,
|
|
rc2kBootConfigLastBootConfigSource DisplayString,
|
|
rc2kBootConfigLastRuntimeImageSource DisplayString,
|
|
rc2kBootConfigLastRuntimeConfigSource DisplayString,
|
|
rc2kBootConfigPrimaryImageSource DisplayString,
|
|
rc2kBootConfigPrimaryConfigSource DisplayString,
|
|
rc2kBootConfigSecondaryImageSource DisplayString,
|
|
rc2kBootConfigSecondaryConfigSource DisplayString,
|
|
rc2kBootConfigTertiaryImageSource DisplayString,
|
|
rc2kBootConfigTertiaryConfigSource DisplayString,
|
|
rc2kBootConfigEnableAutoBoot TruthValue,
|
|
rc2kBootConfigEnableFactoryDefaults TruthValue,
|
|
rc2kBootConfigEnableDebugMode TruthValue,
|
|
rc2kBootConfigEnableHwWatchDogTimer TruthValue,
|
|
rc2kBootConfigEnableRebootOnError TruthValue,
|
|
rc2kBootConfigEnableTelnetServer TruthValue,
|
|
rc2kBootConfigEnableRloginServer TruthValue,
|
|
rc2kBootConfigEnableFtpServer TruthValue,
|
|
rc2kBootConfigEnableTftpServer TruthValue,
|
|
rc2kBootConfigSwVersion DisplayString,
|
|
rc2kBootConfigMulticastConfigProfile INTEGER,
|
|
rc2kBootConfigEnableSshServer TruthValue,
|
|
rc2kBootConfigEnableAltLed TruthValue,
|
|
rc2kBootConfigPrimaryBackupConfigSource DisplayString,
|
|
rc2kBootConfigSecondaryBackupConfigSource DisplayString,
|
|
rc2kBootConfigTertiaryBackupConfigSource DisplayString,
|
|
rc2kBootConfigEnable8616ReAutoneg TruthValue,
|
|
rc2kBootConfigMezzImageSource DisplayString,
|
|
rc2kBootConfigEnableMezz TruthValue,
|
|
rc2kBootConfigPrimaryLicenseSource DisplayString,
|
|
rc2kBootConfigSecondaryLicenseSource DisplayString,
|
|
rc2kBootConfigTertiaryLicenseSource DisplayString,
|
|
rc2kBootConfigUnknownDstMacDiscard TruthValue, --obsolete
|
|
rc2kBootConfigUnknownDstMacDiscardOperStatus INTEGER, --obsolete
|
|
rc2kBootConfigEnableAutoAssignIp TruthValue,
|
|
rc2kBootConfigUpgradeBootImageSource DisplayString,
|
|
rc2kBootConfigUpgradeRuntimeImageSource DisplayString,
|
|
rc2kBootConfigUpgradeMezzImageSource DisplayString,
|
|
rc2kBootConfigUpgradeConfigSource DisplayString,
|
|
rc2kBootConfigUpgradeRModImageSource DisplayString,
|
|
rc2kBootConfigUpgradeRCModImageSource DisplayString,
|
|
rc2kBootConfigUpgradeESMImageSource DisplayString,
|
|
rc2kBootConfigFallBackBootImageSource DisplayString,
|
|
rc2kBootConfigEnableCfPcCompat TruthValue,
|
|
rc2kBootConfigLinecardCompatibilityMode INTEGER,
|
|
rc2kBootConfigEnableSpbmConfigMode TruthValue,
|
|
rc2kBootConfigEnableIpv6Mode TruthValue,
|
|
rc2kBootConfigEnableEnhancedsecureMode TruthValue,
|
|
rc2kBootConfigEnableUrpfMode TruthValue,
|
|
rc2kBootConfigEnableFlowControlMode TruthValue,
|
|
rc2kBootConfigAdvancedFeatureBwReservation INTEGER,
|
|
rc2kBootConfigEnableVxlanGwFullInterworkingMode TruthValue,
|
|
rc2kBootConfigNniMstp TruthValue,
|
|
rc2kBootConfigEnableDvrLeafMode TruthValue,
|
|
rc2kBootConfigLinerateDirectedBroadcast TruthValue,
|
|
rc2kBootConfigEnablevrfScaling TruthValue,
|
|
rc2kBootConfigEnableSyslogRfc5424Format TruthValue
|
|
}
|
|
|
|
rc2kBootConfigSlot OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot number, VSP uses 1,2"
|
|
::= { rc2kBootConfigEntry 1 }
|
|
|
|
rc2kBootConfigLastBootConfigSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "boot config source"
|
|
::= { rc2kBootConfigEntry 2 }
|
|
|
|
rc2kBootConfigLastRuntimeImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "runtime image source"
|
|
::= { rc2kBootConfigEntry 3 }
|
|
|
|
rc2kBootConfigLastRuntimeConfigSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "runtime config source"
|
|
::= { rc2kBootConfigEntry 4 }
|
|
|
|
rc2kBootConfigPrimaryImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "image source"
|
|
::= { rc2kBootConfigEntry 5 }
|
|
|
|
rc2kBootConfigPrimaryConfigSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config source"
|
|
::= { rc2kBootConfigEntry 6 }
|
|
|
|
rc2kBootConfigSecondaryImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "image source"
|
|
::= { rc2kBootConfigEntry 7 }
|
|
|
|
rc2kBootConfigSecondaryConfigSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config source"
|
|
::= { rc2kBootConfigEntry 8 }
|
|
|
|
rc2kBootConfigTertiaryImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "image source"
|
|
::= { rc2kBootConfigEntry 9 }
|
|
|
|
rc2kBootConfigTertiaryConfigSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "config source"
|
|
::= { rc2kBootConfigEntry 10 }
|
|
|
|
rc2kBootConfigEnableAutoBoot OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "auto boot mode"
|
|
::= { rc2kBootConfigEntry 11 }
|
|
|
|
rc2kBootConfigEnableFactoryDefaults OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "use factory default"
|
|
::= { rc2kBootConfigEntry 12 }
|
|
|
|
rc2kBootConfigEnableDebugMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "debug mode"
|
|
::= { rc2kBootConfigEntry 13 }
|
|
|
|
rc2kBootConfigEnableHwWatchDogTimer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "hw watch dog timer"
|
|
::= { rc2kBootConfigEntry 14 }
|
|
|
|
rc2kBootConfigEnableRebootOnError OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "reboot on error"
|
|
::= { rc2kBootConfigEntry 15 }
|
|
|
|
rc2kBootConfigEnableTelnetServer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "telnet server"
|
|
::= { rc2kBootConfigEntry 16 }
|
|
|
|
rc2kBootConfigEnableRloginServer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "rlogin server"
|
|
::= { rc2kBootConfigEntry 17 }
|
|
|
|
rc2kBootConfigEnableFtpServer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ftp server"
|
|
::= { rc2kBootConfigEntry 18 }
|
|
|
|
rc2kBootConfigEnableTftpServer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "tftp server"
|
|
::= { rc2kBootConfigEntry 19 }
|
|
|
|
rc2kBootConfigSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "current sw version"
|
|
::= { rc2kBootConfigEntry 20 }
|
|
|
|
rc2kBootConfigMulticastConfigProfile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "multicast config"
|
|
DEFVAL { 1 }
|
|
::= { rc2kBootConfigEntry 21 }
|
|
|
|
rc2kBootConfigEnableSshServer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ssh server"
|
|
::= { rc2kBootConfigEntry 22 }
|
|
|
|
rc2kBootConfigEnableAltLed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Boot flag for enableing Alternate LED"
|
|
::= { rc2kBootConfigEntry 23 }
|
|
|
|
rc2kBootConfigPrimaryBackupConfigSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "primary backup config source (safeconfig)"
|
|
::= { rc2kBootConfigEntry 24 }
|
|
|
|
rc2kBootConfigSecondaryBackupConfigSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "secondary backup config source (safeconfig)"
|
|
::= { rc2kBootConfigEntry 25 }
|
|
|
|
rc2kBootConfigTertiaryBackupConfigSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "tertiary backup config source (safeconfig)"
|
|
::= { rc2kBootConfigEntry 26 }
|
|
|
|
rc2kBootConfigEnable8616ReAutoneg OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable re-autoneg for 8616SX Cards (Intel GMAC fix)"
|
|
::= { rc2kBootConfigEntry 27 }
|
|
|
|
rc2kBootConfigMezzImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Mezz image source"
|
|
::= { rc2kBootConfigEntry 28 }
|
|
|
|
rc2kBootConfigEnableMezz OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Mezz Flag"
|
|
::= { rc2kBootConfigEntry 29 }
|
|
|
|
rc2kBootConfigPrimaryLicenseSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "primary license file name"
|
|
::= { rc2kBootConfigEntry 30 }
|
|
|
|
rc2kBootConfigSecondaryLicenseSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "secondary license file name"
|
|
::= { rc2kBootConfigEntry 31 }
|
|
|
|
rc2kBootConfigTertiaryLicenseSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "tertiary license file name"
|
|
::= { rc2kBootConfigEntry 32 }
|
|
|
|
rc2kBootConfigUnknownDstMacDiscard OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Enable/disable to discard the unknown destination
|
|
mac address. A device reboot is required for the
|
|
change to take effect."
|
|
::= { rc2kBootConfigEntry 33 }
|
|
|
|
rc2kBootConfigUnknownDstMacDiscardOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Indicates the device operational status of unknown
|
|
destination mac discard."
|
|
::= { rc2kBootConfigEntry 34 }
|
|
|
|
rc2kBootConfigEnableAutoAssignIp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable auto-assign-ip feature"
|
|
::= { rc2kBootConfigEntry 35}
|
|
|
|
rc2kBootConfigUpgradeBootImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Upgrade boot image source"
|
|
::= { rc2kBootConfigEntry 36 }
|
|
|
|
rc2kBootConfigUpgradeRuntimeImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Upgrade runtime image source"
|
|
::= { rc2kBootConfigEntry 37 }
|
|
|
|
rc2kBootConfigUpgradeMezzImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Upgrade mezz image source"
|
|
::= { rc2kBootConfigEntry 38 }
|
|
|
|
rc2kBootConfigUpgradeConfigSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Upgrade config source"
|
|
::= { rc2kBootConfigEntry 39 }
|
|
|
|
rc2kBootConfigUpgradeRModImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "upgrade RMod image source"
|
|
::= { rc2kBootConfigEntry 40 }
|
|
|
|
rc2kBootConfigUpgradeRCModImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "upgrade RCMod image source"
|
|
::= { rc2kBootConfigEntry 41 }
|
|
|
|
rc2kBootConfigUpgradeESMImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "upgrade ESM image source"
|
|
::= { rc2kBootConfigEntry 42 }
|
|
|
|
rc2kBootConfigFallBackBootImageSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "upgrade fall-back boot monitor source"
|
|
::= { rc2kBootConfigEntry 43 }
|
|
|
|
rc2kBootConfigEnableCfPcCompat OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable CF PC compatibility flag"
|
|
::= { rc2kBootConfigEntry 44 }
|
|
|
|
rc2kBootConfigLinecardCompatibilityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gen1(1),
|
|
gen2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This indicates the admin compatibility mode of the
|
|
IO cards on the Chassis.
|
|
In gen1 mode, both the generation 1 cards and
|
|
generation 2 (ROF) cards will be supported and the
|
|
max number of FIB records will be set to 500K.
|
|
In gen2 mode, only the generation 2 (ROF) card will be
|
|
supported and the gen 1 cards will be powered down.
|
|
The max number of FIB records in this mode will be
|
|
set to 1 million.
|
|
For this configuration to take effect, the config
|
|
should be saved and the switch should be reset"
|
|
DEFVAL { gen1 }
|
|
::= { rc2kBootConfigEntry 45 }
|
|
|
|
rc2kBootConfigEnableSpbmConfigMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables spbm-config-mode"
|
|
DEFVAL { true }
|
|
::= { rc2kBootConfigEntry 46}
|
|
|
|
rc2kBootConfigEnableIpv6Mode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "In VSP8200 IPv6 routes with prefix-length
|
|
greater than 64 bits can be supported only
|
|
when this flag is enabled."
|
|
::= { rc2kBootConfigEntry 47 }
|
|
|
|
rc2kBootConfigEnableEnhancedsecureMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
jitc(1),
|
|
disable(2),
|
|
non-jitc(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Enhancedsecure Mode Flag"
|
|
::= { rc2kBootConfigEntry 48 }
|
|
|
|
rc2kBootConfigEnableUrpfMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "From VOSS5.x onwards, unicast reverse path feature will be
|
|
supported on small system platforms only if this flag is enabled.
|
|
Configuring the Urpf Mode will result in config save and a reboot."
|
|
DEFVAL { false }
|
|
::= { rc2kBootConfigEntry 49 }
|
|
|
|
rc2kBootConfigEnableFlowControlMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable Flow Control Mode Flag."
|
|
::= { rc2kBootConfigEntry 50 }
|
|
|
|
rc2kBootConfigAdvancedFeatureBwReservation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
high(2), -- DSG7032 Olny
|
|
low(3) -- DSG9032 DSG8064 only
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allow to enable the port forwarding bandwidth working
|
|
as loopback ports to support advanced feature mode,
|
|
or disable the reservation for full port mode. Enable can be
|
|
in levels of high and low. In level of high, the system
|
|
reserves the maximum bandwidth allowance for the advanced
|
|
features. In level of low, the bandwidth is lesser then maximum
|
|
allowance.
|
|
Platform DSG8032 supports 'high' only
|
|
Platfrom DSG9032 and DSG8064 support 'low' only.
|
|
Other platforms are not applicable.
|
|
Only disable and high are supported in the initial release VOSS 4.3.
|
|
Low will be supported in the VOSS 4.4 release."
|
|
::= { rc2kBootConfigEntry 51 }
|
|
|
|
rc2kBootConfigEnableVxlanGwFullInterworkingMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables vxlan gateway full interworking mode."
|
|
DEFVAL { false }
|
|
::= { rc2kBootConfigEntry 52}
|
|
|
|
rc2kBootConfigNniMstp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to decide whether configuration of mstp and other vlans on the NNI is allowed, default is not allowed."
|
|
DEFVAL { false }
|
|
::= { rc2kBootConfigEntry 53}
|
|
|
|
rc2kBootConfigEnableDvrLeafMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "DVR can be configured as controller or leaf. IP
|
|
related configuration and show commands are not
|
|
allowed on leaf. dvr-leaf-mode flag has to be
|
|
enabled first before user can configure as DVR leaf.
|
|
When boot up with this flag enabled, IP related
|
|
configuration and show commands are hidden. All
|
|
non DVR leaf configurations will not be saved."
|
|
DEFVAL { false }
|
|
::= { rc2kBootConfigEntry 54 }
|
|
|
|
rc2kBootConfigEnablevrfScaling OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to Enable or Disable vrf scaling."
|
|
DEFVAL { false }
|
|
::= { rc2kBootConfigEntry 55}
|
|
|
|
rc2kBootConfigLinerateDirectedBroadcast OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to Enable or Disable Linerate Directed Broadcast.
|
|
With this flag set, IP directed broadcast will operate
|
|
at linerate. Without this flag, all IP directed broadcast
|
|
is handled in legacy mode by the CP and is limited to
|
|
a few hundred pps. When booted with the flag set,
|
|
faceplate port 1/46 is removed from service and
|
|
recommissioned as a loopback port to which all directed
|
|
broadcast traffic is sent. The traffic can then reenter
|
|
the pipeline and flooded over the VLAN at linerate."
|
|
DEFVAL { false }
|
|
::= { rc2kBootConfigEntry 56 }
|
|
|
|
rc2kBootConfigEnableSyslogRfc5424Format OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to enable or disable the syslog output format.
|
|
Enable will align syslog format with RFC 5424."
|
|
DEFVAL { true }
|
|
::= { rc2kBootConfigEntry 59}
|
|
|
|
-- 2k Card table
|
|
|
|
rc2kCardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kCardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k Card table"
|
|
::= { rc2k 6 }
|
|
|
|
rc2kCardEntry OBJECT-TYPE
|
|
SYNTAX Rc2kCardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 2k Card"
|
|
INDEX { rc2kCardIndex }
|
|
::= { rc2kCardTable 1 }
|
|
|
|
Rc2kCardEntry ::= SEQUENCE {
|
|
rc2kCardIndex INTEGER,
|
|
rc2kCardFrontType INTEGER,
|
|
rc2kCardFrontDescription DisplayString,
|
|
rc2kCardFrontAdminStatus INTEGER,
|
|
rc2kCardFrontOperStatus INTEGER,
|
|
rc2kCardFrontSerialNum DisplayString,
|
|
rc2kCardFrontHwVersion DisplayString,
|
|
rc2kCardFrontPartNumber DisplayString,
|
|
rc2kCardFrontDateCode DisplayString,
|
|
rc2kCardFrontDeviations DisplayString,
|
|
rc2kCardFrontMacAddr MacAddress, --excluded
|
|
rc2kCardBackType INTEGER,
|
|
rc2kCardBackDescription DisplayString,
|
|
rc2kCardBackSerialNum DisplayString,
|
|
rc2kCardBackHwVersion DisplayString,
|
|
rc2kCardBackPartNumber DisplayString,
|
|
rc2kCardBackDateCode DisplayString,
|
|
rc2kCardBackDeviations DisplayString,
|
|
rc2kCardPCMCIAType INTEGER,
|
|
rc2kCardPCMCIADescr DisplayString,
|
|
rc2kCardASICDescr DisplayString,
|
|
rc2kCardFrontMasterIO TruthValue,
|
|
rc2kCardSmltOnSingleCpSupported TruthValue,
|
|
rc2kCardMezzCard INTEGER,
|
|
rc2kCardFrontPoeOperStatus INTEGER,
|
|
rc2kCardMezzSerialNum OCTET STRING,
|
|
rc2kCardMezzHwVersion INTEGER,
|
|
rc2kCardMezzPartNum INTEGER,
|
|
rc2kCardSlotPriority INTEGER,
|
|
rc2kCardSlotOriginalPriority INTEGER,
|
|
rc2kCardMode INTEGER,
|
|
rc2kCardModuleSerialNum DisplayString,
|
|
rc2kCardModulePartNumber DisplayString,
|
|
rc2kCardModuleAssemblyDate DisplayString,
|
|
rc2kCardSlotPower INTEGER
|
|
}
|
|
|
|
rc2kCardIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot number."
|
|
::= { rc2kCardEntry 1 }
|
|
|
|
rc2kCardFrontType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1), -- no card installed
|
|
rc2kCPU(537788672), -- 0010 0000 0000 1110 0000 0001 0000 0000
|
|
rc2k48x100BaseTX(539033904), -- 0010 0000 0010 0001 0000 0001 0011 0000
|
|
rc2k24x100BaseTX(539033880), -- 0010 0000 0010 0001 0000 0001 0001 1000
|
|
rc2k32x100BaseTX(539033888), -- 0010 0000 0010 0001 0000 0001 0010 0000
|
|
rc2k8x1000BaseT(539099400), -- 0010 0000 0010 0010 0000 0001 0000 1000
|
|
rc2k16x1000BaseT(539099408), -- 0010 0000 0010 0010 0000 0001 0001 0000
|
|
rc2k24x100BaseFX(540082456), -- 0010 0000 0011 0001 0000 0001 0001 1000
|
|
rc2k8x1000BaseSXBB(540147976), -- 0010 0000 0011 0010 0000 0001 0000 1000
|
|
rc2k16x1000BaseSXBB(540147984), -- 0010 0000 0011 0010 0000 0001 0001 0000
|
|
rc2k8x1000BaseLXBB(540156168), -- 0010 0000 0011 0010 0010 0001 0000 1000
|
|
rc2k8x1000BaseXDBB(540164360), -- 0010 0000 0011 0010 0100 0001 0000 1000
|
|
rc2k4x1000BaseOPM(540168452), -- 0010 0000 0011 0010 0101 0001 0000 0100
|
|
-- OM 2.0 place holder
|
|
-- rc2k8x1000BaseOPM(40168456), 0000 0010 0110 0100 1110 1100 0000 1000
|
|
rc2k8x1000BaseIC(540168456), -- 0010 0000 0011 0010 0101 0001 0000 1000
|
|
rc2k16x1000BaseIC(540168464), -- 0010 0000 0011 0010 0101 0001 0001 0000
|
|
rc2k8x1000BaseSXRBB(540180744), -- 0010 0000 0011 0010 1000 0001 0000 1000
|
|
rc2k8x1000BaseLXRBB(540188936), -- 0010 0000 0011 0010 1010 0001 0000 1000
|
|
rc2k8xOC3(541327624), -- 0010 0000 0100 0100 0000 0001 0000 1000
|
|
rc2k2xOC12(541393154), -- 0010 0000 0100 0101 0000 0001 0000 0010
|
|
rc2k6xPOS(541401350), -- 0010 0000 0100 0101 0010 0001 0000 0110
|
|
rc2k4xATM(542441732), -- 0010 0000 0101 0101 0000 0001 0000 0100
|
|
rc2k8xATM(542441736), -- 0010 0000 0101 0101 0000 0001 0000 1000
|
|
rc2kRMON(545128704), -- 0010 0000 0111 1110 0000 0001 0000 0000
|
|
rc2k1x10GBaseLW(573767937), -- 0010 0000 0011 0011 0000 0001 0000 0001
|
|
rc2k1x10GBaseLR(573784321), -- 0010 0000 0011 0011 0100 0001 0000 0001
|
|
rc2k32x100BaseTXM(572588320), -- 0010 0010 0010 0001 0000 0001 0010 0000
|
|
rc2k48x100BaseTXM(572588336), -- 0010 0010 0010 0001 0000 0001 0011 0000
|
|
rc2k8x1000BaseTM(572653832), -- 0010 0010 0010 0010 0000 0001 0000 1000
|
|
rc2k8x1000BaseSXBBM(573702408), -- 0010 0010 0011 0010 0000 0001 0000 1000
|
|
rc2k8x1000BaseICM(573722888), -- 0010 0010 0011 0010 0101 0001 0000 1000
|
|
rc2k6xPOSM(574955782), -- 0010 0010 0100 0101 0010 0001 0000 0110
|
|
rc2k8xATMM(575996168), -- 0010 0010 0101 0101 0000 0001 0000 1000
|
|
rc2kMg48x100BaseTX(807469360), -- 0011 0000 0010 0001 0000 0001 0011 0000
|
|
rc2kMg32x100BaseTX(807473440), -- 0011 0000 0010 0001 0001 0001 0010 0000
|
|
rc2kMg16x100BaseFX(808522000), -- 0011 0000 0011 0001 0001 0001 0001 0000
|
|
rc2kMg8x1000BaseTX(808583432), -- 0011 0000 0011 0010 0000 0001 0000 1000
|
|
rc2kMg8x1000BaseIC(808603912), -- 0011 0000 0011 0010 0101 0001 0000 1000
|
|
rc2kMg48x100BaseTC(817955120), -- 0011 0000 1100 0001 0000 0001 0011 0000
|
|
-- Alteon
|
|
rc2kAlteonLP(1893859592), -- 0111 0000 1110 0010 0000 0001 0000 1000
|
|
rc2kAlteonWSM(1899102468), -- 0111 0001 0011 0010 0000 0001 0000 0100
|
|
rc2kAlteonASFM(1899106564), -- 0111 0001 0011 0010 0001 0001 0000 0100
|
|
rc2k61AlteonSAM(1926365441), -- 0111 0010 1101 0010 0000 0001 0000 0001
|
|
rc2k62AlteonSAM(1926369537), -- 0111 0010 1101 0010 0001 0001 0000 0001
|
|
-- Cobra card types --
|
|
rc2kCobra48x100BaseT(1073807408), -- 0100 0000 0000 0001 0000 0000 0011 0000
|
|
rc2kCobra24x1000BaseG(1073872920), -- 0100 0000 0000 0010 0000 0000 0001 1000
|
|
rc2kCobra12x1000BaseG(1073872908), -- 0100 0000 0000 0010 0000 0000 0000 1100
|
|
-- ESM card type
|
|
rc2k8x1000BaseOPM(1077039368), -- 0100 0000 0011 0010 0101 0001 0000 1000
|
|
-- 8300
|
|
rc2kPP8300-CPU8x1000BaseSFP(1342316808), -- 0101 0000 0000 0010 0010 0001 0000 1000 0x50022108
|
|
rc2kPP8300-CPU8x1000BaseSFP256(1360142600), -- 0101 0001 0001 0010 0010 0001 0000 1000 0x51122108
|
|
rc2kPP8300-24x1000BaseTX(1344405784), -- 0101 0000 0010 0010 0000 0001 0001 1000 0x50220118
|
|
rc2kPP8300-48x100BaseTX(1344340272), -- 0101 0000 0010 0001 0000 0001 0011 0000 0x50210130
|
|
rc2kPP8300-48x100BaseTXPOE(1344344368), -- 0101 0000 0010 0001 0001 0001 0011 0000 0x50211130
|
|
rc2kPP8300-24x100BaseFX(1345388824), -- 0101 0000 0011 0001 0000 0001 0001 1000 0x50310118
|
|
rc2kPP8300-48x1000BaseTX-4B(1344422192), -- 0101 0000 0010 0010 0100 0001 0011 0000 0x50224130
|
|
rc2kPP8300-48x1000BaseTXPOE-4B(1344426288), -- 0101 0000 0010 0010 0101 0001 0011 0000 0x50225130
|
|
rc2kPP8300-48x1000BaseSFP-2B(1345454384), -- 0101 0000 0011 0010 0000 0001 0011 0000 0x50320130
|
|
rc2kPP8300-CPU2x10GBaseXFP(1342390530), -- 0101 0000 0000 0011 0100 0001 0000 0010 0x50034102
|
|
rc2kPP8300-8x10GBaseXFP-4B(1345519880), -- 0101 0000 0011 0011 0000 0001 0000 1000 0x50330108
|
|
-- Power Ranger
|
|
rc2kPR48X1000BaseTX(606208304), -- 0010 0100 0010 0010 0000 0001 0011 0000
|
|
rc2kPR30X1000BaseSXBB(607277342), -- 0010 0100 0011 0010 0101 0001 0001 1110
|
|
rc2kPR3X10GBaseGbic(607338755), -- 0010 0100 0011 0011 0100 0001 0000 0011
|
|
rc2kPR3X10GBaseXZW(607346947), -- 0010 0100 0011 0011 0110 0001 0000 0011
|
|
rc2kPR48x1000BaseGBRS(607277360), -- 0010 0100 0011 0010 0101 0001 0011 0000 0x24325130
|
|
rc2kPR48x1000BaseGTRS(606241072), -- 0010 0100 0010 0010 1000 0001 0011 0000 0x24228130
|
|
rc2kPR12X10GBaseXLRS(607338764), -- 0010 0100 0011 0011 0100 0001 0000 1100 0x2433410C
|
|
rc2kPR34xXGRS(607277346), -- 0010 0100 0011 0010 0101 0001 0010 0010 0x24325122
|
|
-- OE RC-Module Front types
|
|
rc2kPR48x1000BaseGXRS(607310128), -- 0010 0100 0011 0010 1101 0001 0011 0000 0x2432D130
|
|
rc2kPR30x1000BaseGBRS(607310110), -- 0010 0100 0011 0010 1101 0001 0001 1110 0x2432D11E
|
|
rc2kPR6X10GBaseXLRS(607338758), -- 0010 0100 0011 0011 0100 0001 0000 0110 0x24334106
|
|
rc2kPR26xXGRS(607277338), -- 0010 0100 0011 0010 0101 0001 0001 1010 0x2432511A
|
|
-- 8895 CP (RED == REDesign)
|
|
rc2kCPURed(537792768), -- 0010 0000 0000 1110 0001 0001 0000 0000 0x200E1100
|
|
-- 88xx IO modules
|
|
rc2kPRE48x1000BaseGB(632443184), -- 0010 0101 1011 0010 0101 0001 0011 0000 0x25B25130
|
|
rc2kPRE48x1000BaseGT(631406896), -- 0010 0101 1010 0010 1000 0001 0011 0000 0x25A28130
|
|
rc2kPRE12X10GBaseXL(632504588), -- 0010 0101 1011 0011 0100 0001 0000 1100 0x25B3410C
|
|
rc2kPRE34xXG(632443170), -- 0010 0101 1011 0010 0101 0001 0010 0010 0x25B25122
|
|
-- Cobalt Blue: if you change here, you MUST update rcCardType in rcCardTable
|
|
cbMidplane-28(1090388736), -- 0100 0000 1111 1110 0000 0011 0000 0000 0x40FE0300
|
|
cbMidplaneSapphire(1090396928), -- 0100 0000 1111 1110 0010 0011 0000 0000 0x40FE2300
|
|
cbACPowerSupply(1084097280), -- 0100 0000 1001 1110 0000 0011 0000 0000 0x409E0300
|
|
cbACPowerPlusSupply(1084130048), -- 0100 0000 1001 1110 1000 0011 0000 0000 0x409E8300
|
|
cbCPFanTray(1085145856), -- 0100 0000 1010 1110 0000 0011 0000 0000 0x40AE0300
|
|
cbIOFanTray(1085149952), -- 0100 0000 1010 1110 0001 0011 0000 0000 0x40AE1300
|
|
cbFanTray(1085154048), -- 0100 0000 1010 1110 0010 0011 0000 0000 0x40AE2300
|
|
cbHSFanTray(1085158144), -- 0100 0000 1010 1110 0011 0011 0000 0000 0x40AE3300
|
|
cbAUX(1091437312), -- 0100 0001 0000 1110 0000 0011 0000 0000 0x410E0300
|
|
cbSF3200(1075708672), -- 0100 0000 0001 1110 0000 0011 0000 0000 0x401E0300
|
|
cbSF9600(1075712768), -- 0100 0000 0001 1110 0001 0011 0000 0000 0x401E1300
|
|
cbSF9610(1075716864), -- 0100 0000 0001 1110 0010 0011 0000 0000 0x401E2300
|
|
cbCP-CSC(1073873665), -- 0100 0000 0000 0010 0000 0011 0000 0001 0x40020301
|
|
cb48x1000BaseTX(1075970864), -- 0100 0000 0010 0010 0000 0011 0011 0000 0x40220330
|
|
cb48x1000BaseTXPOE(1075974960), -- 0100 0000 0010 0010 0001 0011 0011 0000 0x40221330
|
|
cb48x1000SFP(1077044016), -- 0100 0000 0011 0010 0110 0011 0011 0000 0x40326330
|
|
cb24x10GBaseSFP(1077109528), -- 0100 0000 0011 0011 0110 0011 0001 1000 0x40336318
|
|
cb48x10GBaseSFP(1077109552), -- 0100 0000 0011 0011 0110 0011 0011 0000 0x40336330
|
|
-- Future CB Cards
|
|
-- cbOPM(1087243008) 0x40CE0300
|
|
-- cbSAS(1087247104) 0x40CE1300
|
|
-- cbIPFIX(1087251200) 0x40CE2300
|
|
-- VSP4K card definitions
|
|
vsp4k4850GTS(1232273458), -- 0100 1001 0111 0011 0000 0000 0011 0010 0x49730032
|
|
vsp4k4850GTSPWRPLUS(1232277554), -- 0100 1001 0111 0011 0001 0000 0011 0010 0x49731032
|
|
vsp4k4450GSXPWRPLUS(1231228978), -- 0100 1001 0110 0011 0001 0000 0011 0010 0x49731032
|
|
vsp4k4450GTXHTPWRPLUS(1232279602), -- 0100 1001 0111 0011 0001 1000 0011 0010 0x49731832
|
|
-- VSP8200
|
|
vsp8k8242XSQ(1298407466), -- 0100 1101 0110 0100 0010 0000 0010 1010 0x4d64202a
|
|
-- VSP8400
|
|
vsp8k8404(1331823105), -- 0100 1111 0110 0010 0000 0010 0000 0001 0x4f620201 (CP and Midplane)
|
|
vsp8k8404C(1331839489), -- 0100 1111 0110 0010 0100 0010 0000 0001 0x4f624201 (CP and Midplane)
|
|
vsp8k8424XS(1298379288), -- 0100 1101 0110 0011 1011 0010 0001 1000 0x4d63b218 (24x1/10G Fiber)
|
|
vsp8k8424XT(1293136408), -- 0100 1101 0001 0011 1011 0010 0001 1000 0x4d13b218 (24x1/10G Copper)
|
|
vsp8k8408QQ(1298432544), -- 0100 1101 0110 0100 1000 0010 0010 0000 0x4d648220 (8x40G QSFP+)
|
|
vsp8k8418XSQ(1298461208), -- 0100 1101 0110 0100 1111 0010 0001 1000 0x4d64f218 (16x1/10G SFP & 2x40G QSFP+)
|
|
vsp8k8418XTQ(1299509784), -- 0100 1101 0111 0100 1111 0010 0001 1000 0x4d74f218 (16x1/10G COPPER & 2x40G QSFP+)
|
|
vsp8k8424GS(1298326040), -- 0100 1101 0110 0010 1110 0010 0001 1000 0x4d62e218 (24x100/1000 SFP)
|
|
vsp8k8424GT(1294107160), -- 0100 1101 0010 0010 1000 0010 0001 1000 0x4d228218 (24x10/100/1000 Copper)
|
|
vsp8k8402CQ(1298498050), -- 0100 1101 0110 0101 1000 0010 0000 0010 0x4d658202 (2x100G QSPF28)
|
|
|
|
-- Tsunami
|
|
vsp8608(1458700545), -- 0101 0110 1111 0010 0000 0001 0000 0001 (0x56f20101) (CP)
|
|
vsp8624XS(1446215960), -- 0101 0110 0011 0011 1000 0001 0001 1000 (0x56338118) (24x10G Fiber)
|
|
vsp8624XT(1445167384), -- 0101 0110 0010 0011 1000 0001 0001 1000 (0x56238118) (24x10G Copper)
|
|
vsp8616QQ(1446281500), -- 0101 0110 0011 0100 1000 0001 0001 1100 (0x5634811c) (16x40G QSFP+)
|
|
vsp8606CQ(1446347032), -- 0101 0110 0011 0101 1000 0001 0001 1000 (0x56358118) (6x100G XQSPF+)
|
|
vsp8600SF(1411293440), -- 0101 0100 0001 1110 1010 0001 0000 0000 (0x541EA100) (SF Card)
|
|
|
|
-- VSP7254
|
|
vsp7k7248XS(1298378800), -- 0100 1101 0110 0011 1011 0000 0011 0000 0x4d63b030 (48x10G SFP+)
|
|
vsp7k7206QQ(1298432024), -- 0100 1101 0110 0100 1000 0000 0001 1000 0x4d648018 (6x40G channelized QSFP+)
|
|
vsp7k7248XT(1294184496), -- 0100 1101 0010 0011 1011 0000 0011 0000 0x4d23b030 (48x10G Copper)
|
|
vsp4k4450GSX(1231224882), -- 0100 1001 0110 0011 0000 0000 0011 0010 0x49630032
|
|
|
|
|
|
-- CB generation 2 (ROF) linecards
|
|
rof48x1000SFP(1144152880), -- 0100 0100 0011 0010 0110 0011 0011 0000 0x44326330
|
|
rofLoadBoard(1144152832), -- 0100 0100 0011 0010 0110 0011 0000 0000 0x44326300
|
|
rof16x10GBaseSFP(1144218384), -- 0100 0100 0011 0011 0110 0011 0001 0000 0x44336310
|
|
rof48x10GBaseSFP(1144218416), -- 0100 0100 0011 0011 0110 0011 0011 0000 0x44336330
|
|
rof4x40GBaseSFP(1144283920), -- 0100 0100 0011 0100 0110 0011 0001 0000 0x44346310
|
|
rof12x40GBaseSFP(1144283952), -- 0100 0100 0011 0100 0110 0011 0011 0000 0x44346330
|
|
|
|
--APLS
|
|
dsg6248GTS(1232274482), -- 0100 1001 0111 0011 0000 0100 0011 0010 (0x49730432)
|
|
dsg6248GTSPWRPLUS(1232278578), -- 0100 1001 0111 0011 0001 0100 0011 0010 (0x49731432)
|
|
dsg8016QQ(895779892), -- 0011 0101 0110 0100 1000 0100 0011 0100 (0x35648434) (16x40G QSFP+)
|
|
dsg7006QQ(1298433048), -- 0100 1101 0110 0100 1000 0100 0001 1000 (0x4d648418) (6x40G channelized QSFP+)
|
|
dsg7048XS(1298379824), -- 0100 1101 0110 0011 1011 0100 0011 0000 (0x4d63b430) (48x10G SFP+)
|
|
dsg7048XT(1294185520), -- 0100 1101 0010 0011 1011 0100 0011 0000 (0x4d23b430) (48x10G Copper)
|
|
dsg7240XSQ(1298408490), -- 0100 1101 0110 0100 0010 0100 0010 1010 (0x4d64242a) (40x10G + 2x40G)
|
|
dsg6248GSX(1231225906), -- 0100 1001 0110 0011 0000 0100 0011 0010 (0x49630432) (48x1G + 2x10G)
|
|
dsg9016CQ(1030067264), -- 0011 1101 0110 0101 1001 0100 0100 0000 (0x3d659440) (32x100G CQ)
|
|
dsg8032QQ(1029997600) -- 0011 1101 0110 0100 1000 0100 0010 0000 (0x3d648420) (32x40G QQ)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate card types in the Accelar
|
|
8000 product families.
|
|
|
|
For Accelar 8000 devices, all cards use
|
|
an encoded value according to the following rule:
|
|
|
|
| 6 | 1 | 5 | 4 | 1 | 3 | 4 | 8 |
|
|
+------+-------+-------+-------+------------+------+------+------+
|
|
bits : |31-26 | 25 | 24-20 | 19-16 | 15 | 14-12 | 11-8 | 7-0 |
|
|
+------+-------+-------+-------+----+-------+------+------+------+
|
|
field : | a | b | c | d | e | f | g | h |
|
|
+------+-------+-------+-------+----+-------+------+------+------+
|
|
|
|
a : Family type/Product line (6 bits (5 bits usuable) (was 4 bits))
|
|
MSB bit31 should not be used (MIB compiler fails)
|
|
|
|
0x0-00 = 0000-00 = Reserved
|
|
0x1-00 = 0001-00 = Monoploy non specific (e.g backplane, psu, fans)
|
|
0x2-00 = 0010-00 = Boardwalk
|
|
0x2-01 = 0010-01 = Power Ranger
|
|
0x3-00 = 0011-00 = Marvin Gardens
|
|
0x3-01 = 0011-01 = DSG8032
|
|
0x3-11 = 0011-11 = i86 Family (DSG9032, DSG8064)
|
|
0x4-00 = 0100-00 = Cobalt Blue (was Thunderbolt and Pacific before that - both are obsolete)
|
|
0x4-01 = 0100-01 = Ring Of Fire
|
|
0x4-10 = 0100-10 = VSP4K
|
|
0x4-11 = 0100-11 = VSP8k, VSP7k
|
|
0x5-00 = 0101-00 = PP8300 (was ParkPlace)
|
|
0x6-00 = 0110-00 = Central Office (only used in chassis)
|
|
0x7-00 = 0111-00 = Alteon WebSystems
|
|
|
|
b : Interface / Device type variation: (Were 3 bits, 2 bits taken by family)
|
|
0x1 = 0 = Non M-Module
|
|
0x1 = 1 = M-module (128K RARU records)
|
|
0x0 = 0 = VSP4k No Mgmt port
|
|
0x1 = 1 = VSP8K with Mgmt Port
|
|
|
|
c : Interface / device type: (5 bits)
|
|
0x0 = 00000 = CPU
|
|
0x1 = 00001 = Switch fabric
|
|
0x2 = 00010 = Copper Ethernet
|
|
0x3 = 00011 = Fiber Ethernet
|
|
0x4 = 00100 = Sonet (Packets)
|
|
0x5 = 00101 = ATM
|
|
0x6 = 00110 = Token Ring
|
|
0x7 = 00111 = RMON
|
|
0x8 = 01000 = BFM (Frame or cells indicated by field 'a' above)
|
|
0x9 = 01001 = PSU
|
|
0xa = 01010 = Fan Tray
|
|
0xb = 01011 = Chassis/Backplane
|
|
0xc = 01100 = CPU Mezz
|
|
0xd = 01101 = SSL
|
|
0xe = 01110 = LaunchPad
|
|
0xf = 01111 = Chassis/Midplane
|
|
0x10 = 10000 = Auxillary Card
|
|
0x11 = 10001 = reserved for future
|
|
0x12 = 10010 = reserved for future
|
|
0x13 = 10011 = WSM Fiber Ethernet
|
|
|
|
d : Maximum speed (highest negotiable speed) (4 bits)
|
|
0x0 = 0000 = 10 Mbit
|
|
0x1 = 0001 = 100 Mbit
|
|
0x2 = 0010 = 1 Gbit
|
|
0x3 = 0011 = 10 Gbit
|
|
0x4 = 0100 = OC-3
|
|
0x4 = 0100 = 40 Gbit for VSP
|
|
0x5 = 0101 = OC-12
|
|
0x5 = 0101 = 100 Gbit for VSP
|
|
0x6 = 0110 = OC-48
|
|
0x7 = 0111 = OC-92
|
|
0x8 = 1000 = OC-192
|
|
0x9 = 1001 = 4 Mbit (TR)
|
|
0xa = 1010 = 16 Mbit (TR)
|
|
0xb = 1011 = E3
|
|
0xc = 1100 = DS1
|
|
0xd = 1101 = DS3
|
|
0xe = 1110 = none (no PHY interfaces on board)
|
|
0xf = 1111 = Max speed indicated implicitly in field (c) (for expansion)
|
|
|
|
|
|
e : AM&OM-06/28/2006: This bit was originally used to indicate port redundancy.
|
|
For PR it is used as a differentiator between Boomslang (0) and Copperhead (1).
|
|
0=non-redundant, 1=redundant; (1 bit)
|
|
For Lind card or MDA
|
|
0 = prototype 1 = Product
|
|
|
|
f : Card specific info. (3 bits)
|
|
For Gigabit used as follows:
|
|
000=short-haul (SX)
|
|
010=long-haul (LX)
|
|
100=extra-distance (DX)
|
|
101=GBIC
|
|
110=SFP
|
|
For 10 Gigabit used as follws
|
|
000 = 10GE WAN serial 1310nm (XLW)
|
|
001 = 10GE WAN serial 1550nm (XEW)
|
|
100 = 10GE LAN serial 1310nm (XLR)
|
|
101 = 10GE LAN serial 1550nm (XER)
|
|
011 = 10GE LAN/WAN (XZW)
|
|
For ATM/Sonet used as follows
|
|
000 = multi mode
|
|
001 = single mode
|
|
010 = single or multimode
|
|
011 = not applicable (e.g., copper has no mode)
|
|
For Marvin Gardens, indicates number of MDA slots
|
|
000 = none
|
|
001 = one option slots
|
|
010 = two option slots
|
|
011 = three option slots
|
|
For Power Supplies:
|
|
000 = AC PSU
|
|
001 = DC PSU
|
|
For SSL:
|
|
000 = server offloading
|
|
001 = end to end encryption
|
|
For WSM:
|
|
000 = WSM mode
|
|
001 = ASFM mode
|
|
For SF:
|
|
000 = 3200 card
|
|
001 = 9600 card
|
|
For Copper Ethernet:
|
|
000: no POE
|
|
001: POE
|
|
For FAN Tray:
|
|
000: CP
|
|
001: IO
|
|
For Objects with no options:
|
|
000: CPU, Mezz, OPM, SAS, IPFIX
|
|
For Chassis :
|
|
000: Non-Trident2+
|
|
100: Trident2 +
|
|
|
|
g : Chassis type (4 bits, possibly MSB 2 bits are extension of field b)
|
|
0x0 = 00-00 = work-group (single card switches, etc)
|
|
0x1 = 00-01 = back-bone (chassis based products)
|
|
0x2 = 00-10 = MDA (option modules)
|
|
0x3 = 00-11 = mid-plane (chassis based products)
|
|
0x4 = x1xx = Use this bit for APLS device
|
|
|
|
h : Number of ports (binary representation obmited) (8 bits)
|
|
(for ACIM/BFM cards, this is number of octapids/blackbirds/dea)
|
|
0x00 = no ports (CPs, SFs, PS's, etc)
|
|
0x01 = 1-port,
|
|
0x02 = 2-port,
|
|
0x04 = 4-port,
|
|
0x06 = 6-port,
|
|
0x08 = 8-port,
|
|
0x0c = 12-port,
|
|
0x10 = 16-port,
|
|
0x18 = 24-port,
|
|
0x22 = 36-port,
|
|
0x30 = 48-port,
|
|
0x40 = 64-port.
|
|
0x80 = 128-port.
|
|
"
|
|
::= { rc2kCardEntry 2 }
|
|
|
|
rc2kCardFrontDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "description"
|
|
::= { rc2kCardEntry 3 }
|
|
|
|
rc2kCardFrontAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
testing(3),
|
|
reset(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the administrative status of this
|
|
card"
|
|
::= { rc2kCardEntry 4 }
|
|
|
|
rc2kCardFrontOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
testing(3),
|
|
unknown(4),
|
|
dormant(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the operational status of this card."
|
|
::= { rc2kCardEntry 5 }
|
|
|
|
rc2kCardFrontSerialNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "manufacturer serial number of card"
|
|
::= { rc2kCardEntry 6 }
|
|
|
|
rc2kCardFrontHwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "hardware version"
|
|
::= { rc2kCardEntry 7 }
|
|
|
|
rc2kCardFrontPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "manufacturer part number of card"
|
|
::= { rc2kCardEntry 8 }
|
|
|
|
rc2kCardFrontDateCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "manufacturer date code"
|
|
::= { rc2kCardEntry 9 }
|
|
|
|
rc2kCardFrontDeviations OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "deviations"
|
|
::= { rc2kCardEntry 10 }
|
|
|
|
rc2kCardFrontMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "base mac address"
|
|
::= { rc2kCardEntry 11 }
|
|
|
|
rc2kCardBackType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
other(1), -- no card installed
|
|
rc2kBackplane(536969472), -- 0010 0000 0000 0001 1000 0001 0000 0000
|
|
rc2kSFM(538837248), -- 0010 0000 0001 1110 0000 0001 0000 0000
|
|
rc2kBFM0(546177280), -- 0010 0000 1000 1111 0000 0001 0000 0000
|
|
rc2kBFM2(546177282), -- 0010 0000 1000 1111 0000 0001 0000 0010
|
|
rc2kBFM3(546177283), -- 0010 0000 1000 1111 0000 0001 0000 0011
|
|
rc2kBFM4(1888354564), -- 0111 0000 1000 1110 0000 0001 0000 0100
|
|
rc2kBFM6(546177286), -- 0010 0000 1000 1111 0000 0001 0000 0100
|
|
rc2kBFM8(546177288), -- 0010 0000 1000 1111 0000 0001 0000 1000
|
|
rc2kMGSFM(807272704), -- 0011 0000 0001 1110 0000 0001 0000 0000
|
|
rc2kFSFM(605946112), -- 0010 0100 0001 1110 0000 0001 0000 0000
|
|
rc2kDPM1(613351861), -- 0010 0100 1000 1111 0000 0001 1011 0101
|
|
rc2kDPM2(613351682), -- 0010 0100 1000 1111 0000 0001 0000 0010
|
|
rc2kDPM3(613351863), -- 0010 0100 1000 1111 0000 0001 1011 0111
|
|
rc2kEDPM2(613351690), -- 0010 0100 1000 1111 0000 0001 0000 1010 0x248F010A
|
|
rc2kEDPM3(613351871), -- 0010 0100 1000 1111 0000 0001 1011 1111 0x248F01BF
|
|
-- EDPM w/RSP2.7
|
|
rc2kEEDPM2(630128906), -- 0010 0101 1000 1111 0000 0001 0000 1010 0x258F010A
|
|
rc2kEEDPM3(630129087) -- 0010 0101 1000 1111 0000 0001 1011 1111 0x258F01BF
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Refer to rc2kCardFrontType for the encoding scheme"
|
|
::= { rc2kCardEntry 12 }
|
|
|
|
rc2kCardBackDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "customer card description"
|
|
::= { rc2kCardEntry 13 }
|
|
|
|
rc2kCardBackSerialNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "customer serial number of card"
|
|
::= { rc2kCardEntry 14 }
|
|
|
|
rc2kCardBackHwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "hardware version"
|
|
::= { rc2kCardEntry 15 }
|
|
|
|
rc2kCardBackPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "customer part number"
|
|
::= { rc2kCardEntry 16 }
|
|
|
|
rc2kCardBackDateCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "customer date code"
|
|
::= { rc2kCardEntry 17 }
|
|
|
|
rc2kCardBackDeviations OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "customer deviations"
|
|
::= { rc2kCardEntry 18 }
|
|
|
|
rc2kCardPCMCIAType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
modemCard(2),
|
|
ethernetCard(3),
|
|
ataDisk(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the type of PCMCIA card currently
|
|
installed in this CPU card, if any.
|
|
|
|
For non-CPU cards, this variable has no meaning and
|
|
will always be set to none(1)."
|
|
DEFVAL { none }
|
|
::= { rc2kCardEntry 19 }
|
|
|
|
rc2kCardPCMCIADescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PCMCIA descriptor"
|
|
::= { rc2kCardEntry 20 }
|
|
|
|
rc2kCardASICDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ASIC descriptor"
|
|
::= { rc2kCardEntry 21 }
|
|
|
|
rc2kCardFrontMasterIO OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether an IO card in a 8100 device
|
|
is operating in the 'master' mode.
|
|
|
|
This variable is not meaningful for non-IO cards and
|
|
non-8100 devices."
|
|
DEFVAL { false }
|
|
::= { rc2kCardEntry 22 }
|
|
|
|
rc2kCardSmltOnSingleCpSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate whether an IO card is updated to
|
|
support SMLT on single Cp feature or not."
|
|
DEFVAL { false }
|
|
::= { rc2kCardEntry 23 }
|
|
|
|
rc2kCardMezzCard OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unsupported(1),
|
|
notpresent(2),
|
|
present(3),
|
|
running(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the CPU Mezz card"
|
|
::= { rc2kCardEntry 24 }
|
|
|
|
rc2kCardFrontPoeOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
testing(3),
|
|
unknown(4),
|
|
dormant(5),
|
|
failure(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the operational status of this card."
|
|
::= { rc2kCardEntry 25 }
|
|
|
|
rc2kCardMezzSerialNum OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to get the serial number of the mezz"
|
|
::= { rc2kCardEntry 26 }
|
|
|
|
rc2kCardMezzHwVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(0),
|
|
e0(1),
|
|
e1(2),
|
|
e2(3),
|
|
e3(4),
|
|
e4(5),
|
|
e5(6),
|
|
e6(7),
|
|
e7(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to get the HW version of the mezz. The
|
|
value of HW Version corresponds to the value of
|
|
part number."
|
|
::= { rc2kCardEntry 27 }
|
|
|
|
rc2kCardMezzPartNum OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(0),
|
|
p120616(1),
|
|
p120618(2),
|
|
p120617(3),
|
|
p120615(4),
|
|
p120724(5),
|
|
p120672(6),
|
|
p120851(7),
|
|
p120939(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to get the part number of the mezz. The
|
|
value of part number corresponds to the value of
|
|
HW Version."
|
|
::= { rc2kCardEntry 28 }
|
|
|
|
rc2kCardSlotPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
critical(1),
|
|
high(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the priority of the slot for power
|
|
management. It will take effect only after reboot."
|
|
::= { rc2kCardEntry 29 }
|
|
|
|
rc2kCardSlotOriginalPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
critical(1),
|
|
high(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Priority of the slot for power management which the
|
|
swtich has currently booted with. It will remain the
|
|
same until the next reboot."
|
|
::= { rc2kCardEntry 30 }
|
|
|
|
rc2kCardMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
singleport(1),
|
|
dualport(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the single port or dual port is
|
|
using"
|
|
::= { rc2kCardEntry 31 }
|
|
|
|
rc2kCardSlotPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administrately turn on or off power on this slot.
|
|
it only applicable on Standby CP & IO and SF Card"
|
|
::= { rc2kCardEntry 32 }
|
|
|
|
rc2kCardModuleSerialNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Module serial number.
|
|
It is only applicable to the RS module. And it is not
|
|
applicable to old version of the R module and CP"
|
|
::= { rc2kCardEntry 33 }
|
|
|
|
rc2kCardModulePartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Module part number.
|
|
It is only applicable to the RS module. And it is not
|
|
applicable to old version of the R module and CP"
|
|
::= { rc2kCardEntry 34 }
|
|
|
|
rc2kCardModuleAssemblyDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Module assemly date.
|
|
It is only applicable to the RS module. And it is not
|
|
applicable to old version of the R module and CP"
|
|
::= { rc2kCardEntry 35 }
|
|
|
|
-- 2k copy file
|
|
|
|
rc2kCopyFile OBJECT IDENTIFIER ::= { rc2k 7 }
|
|
|
|
rc2kCopyFileSource OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "source file"
|
|
::= { rc2kCopyFile 1 }
|
|
|
|
rc2kCopyFileDestination OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "dest file"
|
|
::= { rc2kCopyFile 2 }
|
|
|
|
rc2kCopyFileAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
start(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "start or cancell"
|
|
::= { rc2kCopyFile 3 }
|
|
|
|
rc2kCopyFileResult OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
inProgress(2),
|
|
success(3),
|
|
fail(4),
|
|
invalidSource(5),
|
|
invalidDestination(6),
|
|
outOfMemory(7),
|
|
outOfSpace(8),
|
|
fileNotFound(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "result"
|
|
::= { rc2kCopyFile 4 }
|
|
|
|
-- 2k Qos
|
|
|
|
rc2kQos OBJECT IDENTIFIER ::= { rc2k 8 }
|
|
|
|
rc2kQosQosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to define the Quality Of
|
|
Service(QOS) profiles for the system. The system
|
|
can support eight different QOS levels. Each QOS
|
|
level can be individually configured."
|
|
::= { rc2kQos 1 }
|
|
|
|
rc2kQosQosEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "QOS profile entry."
|
|
INDEX { rc2kQosQosRow }
|
|
::= { rc2kQosQosTable 1 }
|
|
|
|
Rc2kQosQosEntry ::= SEQUENCE {
|
|
rc2kQosQosRow INTEGER,
|
|
rc2kQosQosLevel INTEGER,
|
|
rc2kQosQosName DisplayString,
|
|
rc2kQosQosAdminWeight Integer32,
|
|
rc2kQosQosOperWeight Integer32,
|
|
rc2kQosOctapidMode INTEGER, --excluded
|
|
rc2kQosQosAdminThreshold INTEGER,
|
|
rc2kQosQosOperThreshold INTEGER,
|
|
rc2kQosPidMode INTEGER,
|
|
rc2kQosQosDropThresholdPercentage INTEGER,
|
|
rc2kQosQosDropActualPercentage INTEGER,
|
|
rc2kQosQosDropTrapState EnableValue
|
|
}
|
|
|
|
rc2kQosQosRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosQosEntry 1 }
|
|
|
|
rc2kQosQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "QOS level"
|
|
::= { rc2kQosQosEntry 2 }
|
|
|
|
rc2kQosQosName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Qos level name"
|
|
::= { rc2kQosQosEntry 3 }
|
|
|
|
rc2kQosQosAdminWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administrative transmit opportunity percentage"
|
|
::= { rc2kQosQosEntry 4 }
|
|
|
|
rc2kQosQosOperWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operational transmit opportunity percentage"
|
|
::= { rc2kQosQosEntry 5 }
|
|
|
|
rc2kQosOctapidMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
modeSingle(1),
|
|
mode100(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Octapid mode"
|
|
::= { rc2kQosQosEntry 6 }
|
|
|
|
rc2kQosQosAdminThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
oneEight(1),
|
|
oneQuarter(2),
|
|
threeEight(3),
|
|
halfSdram(4),
|
|
fiveEight(5),
|
|
threeQuarter(6),
|
|
sevenEights(7),
|
|
allSdram(8),
|
|
notpresent(9)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administrative queue threshold"
|
|
::= { rc2kQosQosEntry 7 }
|
|
|
|
rc2kQosQosOperThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
oneEight(1),
|
|
oneQuarter(2),
|
|
threeEight(3),
|
|
halfSdram(4),
|
|
fiveEight(5),
|
|
threeQuarter(6),
|
|
sevenEights(7),
|
|
allSdram(8),
|
|
notpresent(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operational queue threshold"
|
|
::= { rc2kQosQosEntry 8 }
|
|
|
|
rc2kQosPidMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
modeSingle(1),
|
|
mode100(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Pid mode"
|
|
::= { rc2kQosQosEntry 9 }
|
|
|
|
rc2kQosQosDropThresholdPercentage OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The threshold percentage for QoS trap timer
|
|
for a particular queuing class"
|
|
DEFVAL { 0 }
|
|
::= { rc2kQosQosEntry 10 }
|
|
|
|
rc2kQosQosDropActualPercentage OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The actual page drop percentage on a queue"
|
|
DEFVAL { 0 }
|
|
::= { rc2kQosQosEntry 11 }
|
|
|
|
rc2kQosQosDropTrapState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Disable/enable page drop traps
|
|
for a particular queuing class"
|
|
DEFVAL { enable }
|
|
::= { rc2kQosQosEntry 12 }
|
|
|
|
-- 2k Qos Ingress Tag To Qos Table
|
|
|
|
rc2kQosIngressTagToQosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosIngressTagToQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the 802.1P
|
|
to QOS (802.1P->QOS) mapping on packet
|
|
ingress."
|
|
::= { rc2kQos 2 }
|
|
|
|
rc2kQosIngressTagToQosEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosIngressTagToQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 8021P->Qos mapping"
|
|
INDEX { rc2kQosIngressTagToQosRow }
|
|
::= { rc2kQosIngressTagToQosTable 1 }
|
|
|
|
Rc2kQosIngressTagToQosEntry ::= SEQUENCE {
|
|
rc2kQosIngressTagToQosRow INTEGER,
|
|
rc2kQosIngressTagToQosInIeee8021P INTEGER,
|
|
rc2kQosIngressTagToQosQosLevel INTEGER
|
|
}
|
|
|
|
rc2kQosIngressTagToQosRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosIngressTagToQosEntry 1 }
|
|
|
|
rc2kQosIngressTagToQosInIeee8021P OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "802.1P"
|
|
::= { rc2kQosIngressTagToQosEntry 2 }
|
|
|
|
rc2kQosIngressTagToQosQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Qos level"
|
|
::= { rc2kQosIngressTagToQosEntry 3 }
|
|
|
|
-- 2k Ingress DsField To Qos Table
|
|
|
|
rc2kQosIngressDsFieldToQosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosIngressDsFieldToQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "This table is used to specify the DSCP
|
|
field to QOS (DsField->QOS) mapping on
|
|
packet ingress."
|
|
::= { rc2kQos 3 }
|
|
|
|
rc2kQosIngressDsFieldToQosEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosIngressDsFieldToQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing information of DsField->Qos mapping"
|
|
INDEX { rc2kQosIngressDsFieldToQosRow }
|
|
::= { rc2kQosIngressDsFieldToQosTable 1 }
|
|
|
|
Rc2kQosIngressDsFieldToQosEntry ::= SEQUENCE {
|
|
rc2kQosIngressDsFieldToQosRow INTEGER,
|
|
rc2kQosIngressDsFieldToQosInDsField INTEGER,
|
|
rc2kQosIngressDsFieldToQosQosLevel INTEGER
|
|
}
|
|
|
|
rc2kQosIngressDsFieldToQosRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosIngressDsFieldToQosEntry 1 }
|
|
|
|
rc2kQosIngressDsFieldToQosInDsField OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "diffserv dsField"
|
|
::= { rc2kQosIngressDsFieldToQosEntry 2 }
|
|
|
|
rc2kQosIngressDsFieldToQosQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "qos level"
|
|
::= { rc2kQosIngressDsFieldToQosEntry 3 }
|
|
|
|
-- 2k Egress Qos To Tag Table
|
|
|
|
rc2kQosEgressQosToTagTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosEgressQosToTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the QOS to
|
|
802.1P (QOS->802.1P) mapping on packet
|
|
egress."
|
|
::= { rc2kQos 4 }
|
|
|
|
rc2kQosEgressQosToTagEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosEgressQosToTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Qos->Qos mapping"
|
|
INDEX { rc2kQosEgressQosToTagRow }
|
|
::= { rc2kQosEgressQosToTagTable 1 }
|
|
|
|
Rc2kQosEgressQosToTagEntry ::= SEQUENCE {
|
|
rc2kQosEgressQosToTagRow INTEGER,
|
|
rc2kQosEgressQosToTagQosLevel INTEGER,
|
|
rc2kQosEgressQosToTagOutIeee8021P INTEGER
|
|
}
|
|
|
|
rc2kQosEgressQosToTagRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosEgressQosToTagEntry 1 }
|
|
|
|
rc2kQosEgressQosToTagQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "qos level"
|
|
::= { rc2kQosEgressQosToTagEntry 2 }
|
|
|
|
rc2kQosEgressQosToTagOutIeee8021P OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "802.1P"
|
|
::= { rc2kQosEgressQosToTagEntry 3 }
|
|
|
|
-- 2k Egress Qos To DsField Table
|
|
|
|
rc2kQosEgressQosToDsFieldTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosEgressQosToDsFieldEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "This table is used to specify the QOS to
|
|
DSCP field (QOS->DsField) mapping on packet
|
|
egress."
|
|
::= { rc2kQos 5 }
|
|
|
|
rc2kQosEgressQosToDsFieldEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosEgressQosToDsFieldEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Entry containing information of Qos->Qos mapping"
|
|
INDEX { rc2kQosEgressQosToDsFieldRow }
|
|
::= { rc2kQosEgressQosToDsFieldTable 1 }
|
|
|
|
Rc2kQosEgressQosToDsFieldEntry ::= SEQUENCE {
|
|
rc2kQosEgressQosToDsFieldRow INTEGER,
|
|
rc2kQosEgressQosToDsFieldQosLevel INTEGER,
|
|
rc2kQosEgressQosToDsFieldOutDsField INTEGER
|
|
}
|
|
|
|
rc2kQosEgressQosToDsFieldRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosEgressQosToDsFieldEntry 1 }
|
|
|
|
rc2kQosEgressQosToDsFieldQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "qos level"
|
|
::= { rc2kQosEgressQosToDsFieldEntry 2 }
|
|
|
|
rc2kQosEgressQosToDsFieldOutDsField OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "diffserv dsField"
|
|
::= { rc2kQosEgressQosToDsFieldEntry 3 }
|
|
|
|
-- 2k Traffic Profile Table
|
|
|
|
rc2kQosTrafficProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosTrafficProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify traffic profiles
|
|
for the system. These traffic profiles are
|
|
used for policying purposes to guarantee streams
|
|
of traffic do not egress the system above a
|
|
certain rate. These traffic profiles are applied
|
|
in the 'rcIpFilterTable'."
|
|
::= { rc2kQos 6 }
|
|
|
|
rc2kQosTrafficProfileEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosTrafficProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Qos->Qos mapping"
|
|
INDEX { rc2kQosTrafficProfileId }
|
|
::= { rc2kQosTrafficProfileTable 1 }
|
|
|
|
Rc2kQosTrafficProfileEntry ::= SEQUENCE {
|
|
rc2kQosTrafficProfileId INTEGER,
|
|
rc2kQosTrafficProfileName DisplayString,
|
|
rc2kQosTrafficProfileEnable TruthValue,
|
|
rc2kQosTrafficProfileTranslateDscpEnable TruthValue,
|
|
rc2kQosTrafficProfileInProfileDscp DisplayString,
|
|
rc2kQosTrafficProfileOutProfileDscp DisplayString,
|
|
rc2kQosTrafficProfileDiscardEnable TruthValue,
|
|
rc2kQosTrafficProfileAverageRate Integer32,
|
|
rc2kQosTrafficProfilePeakRate Integer32,
|
|
rc2kQosTrafficProfileRowStatus RowStatus
|
|
}
|
|
|
|
rc2kQosTrafficProfileId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Profile id"
|
|
::= { rc2kQosTrafficProfileEntry 1 }
|
|
|
|
rc2kQosTrafficProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Profile name"
|
|
::= { rc2kQosTrafficProfileEntry 2 }
|
|
|
|
rc2kQosTrafficProfileEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable this entry"
|
|
DEFVAL { false }
|
|
::= { rc2kQosTrafficProfileEntry 3 }
|
|
|
|
rc2kQosTrafficProfileTranslateDscpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether translation of the DSCP
|
|
field should be performed. If enabled, the value
|
|
in the DSCP field for packets that fall within
|
|
the traffic profile will get translated to
|
|
'rc2kQosTrafficProfileInProfileDscp'. Packets
|
|
that fall outside the traffic profile will get
|
|
translated to 'rc2kQosTrafficProfileOutProfileDscp'.
|
|
If disabled, no translation is performed."
|
|
DEFVAL { false }
|
|
::= { rc2kQosTrafficProfileEntry 4 }
|
|
|
|
rc2kQosTrafficProfileInProfileDscp OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the DSCP value for 'good' packets."
|
|
::= { rc2kQosTrafficProfileEntry 5 }
|
|
|
|
rc2kQosTrafficProfileOutProfileDscp OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify the DSCP value for 'violation'
|
|
packets."
|
|
::= { rc2kQosTrafficProfileEntry 6 }
|
|
|
|
rc2kQosTrafficProfileDiscardEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to specify whether packets that fall outside
|
|
the traffic profile should be discarded."
|
|
DEFVAL { true }
|
|
::= { rc2kQosTrafficProfileEntry 7 }
|
|
|
|
rc2kQosTrafficProfileAverageRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Average rate in packets per second."
|
|
::= { rc2kQosTrafficProfileEntry 8 }
|
|
|
|
rc2kQosTrafficProfilePeakRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Peak rate in packets per second."
|
|
::= { rc2kQosTrafficProfileEntry 9 }
|
|
|
|
rc2kQosTrafficProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rc2kQosTrafficProfileEntry 10 }
|
|
|
|
-- 2k Ingress Dscp To Qos Table
|
|
|
|
rc2kQosIngressDscpToQosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosIngressDscpToQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the DSCP to
|
|
QOS (Dscp->QOS) mapping on packet ingress."
|
|
::= { rc2kQos 7 }
|
|
|
|
rc2kQosIngressDscpToQosEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosIngressDscpToQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Dscp->Qos mapping"
|
|
INDEX { rc2kQosIngressDscpToQosRow }
|
|
::= { rc2kQosIngressDscpToQosTable 1 }
|
|
|
|
Rc2kQosIngressDscpToQosEntry ::= SEQUENCE {
|
|
rc2kQosIngressDscpToQosRow INTEGER,
|
|
rc2kQosIngressDscpToQosInDscp INTEGER,
|
|
rc2kQosIngressDscpToQosInDscpBinaryFormat DisplayString,
|
|
rc2kQosIngressDscpToQosQosLevel INTEGER
|
|
}
|
|
|
|
rc2kQosIngressDscpToQosRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosIngressDscpToQosEntry 1 }
|
|
|
|
rc2kQosIngressDscpToQosInDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A 6-bit value used to define the Differentiated
|
|
Service Code Point(DSCP)."
|
|
::= { rc2kQosIngressDscpToQosEntry 2 }
|
|
|
|
rc2kQosIngressDscpToQosInDscpBinaryFormat OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The 'rc2kQosIngressDscpToQosInDscp' value shown
|
|
in a binary format (network order)."
|
|
::= { rc2kQosIngressDscpToQosEntry 3 }
|
|
|
|
rc2kQosIngressDscpToQosQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "qos level"
|
|
::= { rc2kQosIngressDscpToQosEntry 4 }
|
|
|
|
|
|
-- 2k Egress Qos To Dscp Table
|
|
|
|
rc2kQosEgressQosToDscpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosEgressQosToDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the QOS to
|
|
DSCP field (QOS->DsField) mapping on packet
|
|
egress."
|
|
::= { rc2kQos 8 }
|
|
|
|
rc2kQosEgressQosToDscpEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosEgressQosToDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Qos->Qos mapping"
|
|
INDEX { rc2kQosEgressQosToDscpRow }
|
|
::= { rc2kQosEgressQosToDscpTable 1 }
|
|
|
|
Rc2kQosEgressQosToDscpEntry ::= SEQUENCE {
|
|
rc2kQosEgressQosToDscpRow INTEGER,
|
|
rc2kQosEgressQosToDscpQosLevel INTEGER,
|
|
rc2kQosEgressQosToDscpOutDscp INTEGER,
|
|
rc2kQosEgressQosToDscpOutDscpBinaryFormat DisplayString
|
|
}
|
|
|
|
rc2kQosEgressQosToDscpRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosEgressQosToDscpEntry 1 }
|
|
|
|
rc2kQosEgressQosToDscpQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "qos level"
|
|
::= { rc2kQosEgressQosToDscpEntry 2 }
|
|
|
|
rc2kQosEgressQosToDscpOutDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A 6-bit value used to define the Differentiated
|
|
Service Code Point(DSCP)."
|
|
::= { rc2kQosEgressQosToDscpEntry 3 }
|
|
|
|
rc2kQosEgressQosToDscpOutDscpBinaryFormat OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The 'rc2kQosEgressQosToDscpOutDscp' value show
|
|
in a binary format (network order)."
|
|
::= { rc2kQosEgressQosToDscpEntry 4 }
|
|
|
|
-- 2k Egress Qos (For Green Color Packets ) To Tag Table
|
|
|
|
rc2kQosEgressGreenColorQosToTagTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosEgressGreenColorQosToTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the green color
|
|
QOS to 802.1P (QOS -> 802.1P) mapping on packet
|
|
egress."
|
|
::= { rc2kQos 9 }
|
|
|
|
rc2kQosEgressGreenColorQosToTagEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosEgressGreenColorQosToTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing infomation of Qos -> Qos mapping
|
|
for green colored packets."
|
|
INDEX { rc2kQosEgressGreenColorQosToTagRow }
|
|
::= { rc2kQosEgressGreenColorQosToTagTable 1 }
|
|
|
|
Rc2kQosEgressGreenColorQosToTagEntry ::= SEQUENCE {
|
|
rc2kQosEgressGreenColorQosToTagRow INTEGER,
|
|
rc2kQosEgressGreenColorQosToTagQosLevel INTEGER,
|
|
rc2kQosEgressGreenColorQosToTagOutIeee8021P INTEGER
|
|
}
|
|
|
|
rc2kQosEgressGreenColorQosToTagRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosEgressGreenColorQosToTagEntry 1 }
|
|
|
|
rc2kQosEgressGreenColorQosToTagQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Qos level"
|
|
::= { rc2kQosEgressGreenColorQosToTagEntry 2 }
|
|
|
|
rc2kQosEgressGreenColorQosToTagOutIeee8021P OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "802.1P. This value shows the Pbit mapping with Qos
|
|
level on the egress packet "
|
|
::= { rc2kQosEgressGreenColorQosToTagEntry 3 }
|
|
|
|
-- 2k Egress Qos (For Yellow Color Packets ) To Tag Table
|
|
|
|
rc2kQosEgressYellowColorQosToTagTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosEgressYellowColorQosToTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the yellow color
|
|
QOS to 802.1P (QOS -> 802.1P) mapping on packet
|
|
egress."
|
|
::= { rc2kQos 10 }
|
|
|
|
rc2kQosEgressYellowColorQosToTagEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosEgressYellowColorQosToTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing infomation of Qos -> Qos mapping
|
|
for Yellow colored packets."
|
|
INDEX { rc2kQosEgressYellowColorQosToTagRow }
|
|
::= { rc2kQosEgressYellowColorQosToTagTable 1 }
|
|
|
|
Rc2kQosEgressYellowColorQosToTagEntry ::= SEQUENCE {
|
|
rc2kQosEgressYellowColorQosToTagRow INTEGER,
|
|
rc2kQosEgressYellowColorQosToTagQosLevel INTEGER,
|
|
rc2kQosEgressYellowColorQosToTagOutIeee8021P INTEGER
|
|
}
|
|
|
|
rc2kQosEgressYellowColorQosToTagRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosEgressYellowColorQosToTagEntry 1 }
|
|
|
|
rc2kQosEgressYellowColorQosToTagQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Qos level"
|
|
::= { rc2kQosEgressYellowColorQosToTagEntry 2 }
|
|
|
|
rc2kQosEgressYellowColorQosToTagOutIeee8021P OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "802.1P, The value shows the Pbit Mapping with the Qos
|
|
level on Egress packet"
|
|
::= { rc2kQosEgressYellowColorQosToTagEntry 3 }
|
|
|
|
-- 2k Egress Qos (For Red Color Packets ) To Tag Table
|
|
|
|
rc2kQosEgressRedColorQosToTagTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosEgressRedColorQosToTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the red color
|
|
QOS to 802.1P (QOS -> 802.1P) mapping on packet
|
|
egress."
|
|
::= { rc2kQos 11 }
|
|
|
|
rc2kQosEgressRedColorQosToTagEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosEgressRedColorQosToTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing infomation of Qos -> Qos mapping
|
|
for red colored packets."
|
|
INDEX { rc2kQosEgressRedColorQosToTagRow }
|
|
::= { rc2kQosEgressRedColorQosToTagTable 1 }
|
|
|
|
Rc2kQosEgressRedColorQosToTagEntry ::= SEQUENCE {
|
|
rc2kQosEgressRedColorQosToTagRow INTEGER,
|
|
rc2kQosEgressRedColorQosToTagQosLevel INTEGER,
|
|
rc2kQosEgressRedColorQosToTagOutIeee8021P INTEGER
|
|
}
|
|
|
|
rc2kQosEgressRedColorQosToTagRow OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosEgressRedColorQosToTagEntry 1 }
|
|
|
|
rc2kQosEgressRedColorQosToTagQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Qos level"
|
|
::= { rc2kQosEgressRedColorQosToTagEntry 2 }
|
|
|
|
rc2kQosEgressRedColorQosToTagOutIeee8021P OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "802.1P. The value shows the Pbit mapping with the Qos
|
|
level of Egress packet"
|
|
::= { rc2kQosEgressRedColorQosToTagEntry 3 }
|
|
|
|
-- WRED THRESHOLD TABLE
|
|
rc2kQosWredThreshold OBJECT IDENTIFIER ::= { rc2kQos 12 }
|
|
|
|
-- WRED THRESHOLD HIGH DROP TABLE
|
|
rc2kQosWredThresholdHighDropTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosWredThresholdHighDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the WRED drop
|
|
thresholds for High Drop Curve Set"
|
|
::= { rc2kQosWredThreshold 1 }
|
|
|
|
rc2kQosWredThresholdHighDropEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosWredThresholdHighDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information for different Qmin
|
|
and Qmax for High Drop Curve Set"
|
|
INDEX { rc2kQosWredThresholdHighDropColor }
|
|
::= { rc2kQosWredThresholdHighDropTable 1 }
|
|
|
|
Rc2kQosWredThresholdHighDropEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rc2kQosWredThresholdHighDropColor INTEGER,
|
|
rc2kQosWredThresholdHighDropQmin INTEGER,
|
|
rc2kQosWredThresholdHighDropQmax INTEGER
|
|
}
|
|
|
|
rc2kQosWredThresholdHighDropColor OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
green(1),
|
|
yellow(2),
|
|
red(3),
|
|
uncolored(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Colored Queue for WRED Threshold High Drop Curve Set."
|
|
::= { rc2kQosWredThresholdHighDropEntry 1 }
|
|
|
|
rc2kQosWredThresholdHighDropQmin OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Minimum drop threshold."
|
|
::= { rc2kQosWredThresholdHighDropEntry 2 }
|
|
|
|
rc2kQosWredThresholdHighDropQmax OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum drop threshold."
|
|
::= { rc2kQosWredThresholdHighDropEntry 3 }
|
|
|
|
-- WRED THRESHOLD MEDIUM DROP TABLE
|
|
rc2kQosWredThresholdMediumDropTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosWredThresholdMediumDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the WRED drop
|
|
thresholds for Medium Drop Curve Set"
|
|
::= { rc2kQosWredThreshold 2 }
|
|
|
|
rc2kQosWredThresholdMediumDropEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosWredThresholdMediumDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information for different Qmin
|
|
and Qmax for Medium Drop Curve Set"
|
|
INDEX { rc2kQosWredThresholdMediumDropColor }
|
|
::= { rc2kQosWredThresholdMediumDropTable 1 }
|
|
|
|
Rc2kQosWredThresholdMediumDropEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rc2kQosWredThresholdMediumDropColor INTEGER,
|
|
rc2kQosWredThresholdMediumDropQmin INTEGER,
|
|
rc2kQosWredThresholdMediumDropQmax INTEGER
|
|
}
|
|
|
|
rc2kQosWredThresholdMediumDropColor OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
green(1),
|
|
yellow(2),
|
|
red(3),
|
|
uncolored(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Colored Queue for WRED Threshold Medium Drop Curve Set."
|
|
::= { rc2kQosWredThresholdMediumDropEntry 1 }
|
|
|
|
rc2kQosWredThresholdMediumDropQmin OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Minimum drop threshold."
|
|
::= { rc2kQosWredThresholdMediumDropEntry 2 }
|
|
|
|
rc2kQosWredThresholdMediumDropQmax OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum drop threshold."
|
|
::= { rc2kQosWredThresholdMediumDropEntry 3 }
|
|
|
|
-- WRED THRESHOLD LOW DROP TABLE
|
|
rc2kQosWredThresholdLowDropTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosWredThresholdLowDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the WRED drop
|
|
thresholds for Low Drop Curve Set"
|
|
::= { rc2kQosWredThreshold 3 }
|
|
|
|
rc2kQosWredThresholdLowDropEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosWredThresholdLowDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information for different
|
|
Qmin and Qmax for Low Drop Curve Set"
|
|
INDEX { rc2kQosWredThresholdLowDropColor }
|
|
::= { rc2kQosWredThresholdLowDropTable 1 }
|
|
|
|
Rc2kQosWredThresholdLowDropEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rc2kQosWredThresholdLowDropColor INTEGER,
|
|
rc2kQosWredThresholdLowDropQmin INTEGER,
|
|
rc2kQosWredThresholdLowDropQmax INTEGER
|
|
}
|
|
|
|
rc2kQosWredThresholdLowDropColor OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
green(1),
|
|
yellow(2),
|
|
red(3),
|
|
uncolored(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Colored Queue for WRED Threshold Low Drop Curve Set."
|
|
::= { rc2kQosWredThresholdLowDropEntry 1 }
|
|
|
|
rc2kQosWredThresholdLowDropQmin OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Minimum drop threshold."
|
|
::= { rc2kQosWredThresholdLowDropEntry 2 }
|
|
|
|
rc2kQosWredThresholdLowDropQmax OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum drop threshold."
|
|
::= { rc2kQosWredThresholdLowDropEntry 3 }
|
|
|
|
-- 2k Qos Traps due to page drop
|
|
rc2kQosDropTrapTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The timer settings for traps being sent
|
|
on discard of packets on QoS queues"
|
|
DEFVAL { 900 }
|
|
::= { rc2kQos 13 }
|
|
|
|
-- 2k QoS Egress Queue Stats
|
|
rc2kQosStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains Qos statistic of the for all interface.
|
|
Which includes Pbit Tx and drop by pages in 8 Qos level"
|
|
::= { rc2kQos 14 }
|
|
|
|
|
|
rc2kQosStatsEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Qos Statistics table entry contain the pbit Tx and dorp of a interface"
|
|
INDEX {rc2kQosStatsIfIndex}
|
|
::= { rc2kQosStatsTable 1 }
|
|
|
|
Rc2kQosStatsEntry ::=
|
|
SEQUENCE {
|
|
rc2kQosStatsIfIndex InterfaceIndex,
|
|
rc2kQosStatsTxPbit0Pages Counter64,
|
|
rc2kQosStatsDrPbit0Pages Counter64,
|
|
rc2kQosStatsTxPbit1Pages Counter64,
|
|
rc2kQosStatsDrPbit1Pages Counter64,
|
|
rc2kQosStatsTxPbit2Pages Counter64,
|
|
rc2kQosStatsDrPbit2Pages Counter64,
|
|
rc2kQosStatsTxPbit3Pages Counter64,
|
|
rc2kQosStatsDrPbit3Pages Counter64,
|
|
rc2kQosStatsTxPbit4Pages Counter64,
|
|
rc2kQosStatsDrPbit4Pages Counter64,
|
|
rc2kQosStatsTxPbit5Pages Counter64,
|
|
rc2kQosStatsDrPbit5Pages Counter64,
|
|
rc2kQosStatsTxPbit6Pages Counter64,
|
|
rc2kQosStatsDrPbit6Pages Counter64,
|
|
rc2kQosStatsTxPbit7Pages Counter64,
|
|
rc2kQosStatsDrPbit7Pages Counter64
|
|
}
|
|
|
|
rc2kQosStatsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "port number"
|
|
::= { rc2kQosStatsEntry 1 }
|
|
|
|
rc2kQosStatsTxPbit0Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Transmitted for p-bit 0"
|
|
::= { rc2kQosStatsEntry 2 }
|
|
|
|
rc2kQosStatsDrPbit0Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Dropped for p-bit 0"
|
|
::= { rc2kQosStatsEntry 3 }
|
|
|
|
rc2kQosStatsTxPbit1Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Transmitted for p-bit 1"
|
|
::= { rc2kQosStatsEntry 4 }
|
|
|
|
rc2kQosStatsDrPbit1Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Dropped for p-bit 1"
|
|
::= { rc2kQosStatsEntry 5 }
|
|
|
|
rc2kQosStatsTxPbit2Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Transmitted for p-bit 2"
|
|
::= { rc2kQosStatsEntry 6 }
|
|
|
|
rc2kQosStatsDrPbit2Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Dropped for p-bit 2"
|
|
::= { rc2kQosStatsEntry 7 }
|
|
|
|
rc2kQosStatsTxPbit3Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Transmitted for p-bit 3"
|
|
::= { rc2kQosStatsEntry 8 }
|
|
|
|
rc2kQosStatsDrPbit3Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Dropped for p-bit 3"
|
|
::= { rc2kQosStatsEntry 9 }
|
|
|
|
rc2kQosStatsTxPbit4Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Transmitted for p-bit 4"
|
|
::= { rc2kQosStatsEntry 10 }
|
|
|
|
rc2kQosStatsDrPbit4Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Dropped for p-bit 4"
|
|
::= { rc2kQosStatsEntry 11 }
|
|
|
|
rc2kQosStatsTxPbit5Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Transmitted for p-bit 5"
|
|
::= { rc2kQosStatsEntry 12 }
|
|
|
|
rc2kQosStatsDrPbit5Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Dropped for p-bit 5"
|
|
::= { rc2kQosStatsEntry 13 }
|
|
|
|
rc2kQosStatsTxPbit6Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Transmitted for p-bit 6"
|
|
::= { rc2kQosStatsEntry 14 }
|
|
|
|
rc2kQosStatsDrPbit6Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Dropped for p-bit 6"
|
|
::= { rc2kQosStatsEntry 15 }
|
|
|
|
rc2kQosStatsTxPbit7Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Transmitted for p-bit 7"
|
|
::= { rc2kQosStatsEntry 16 }
|
|
|
|
rc2kQosStatsDrPbit7Pages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Pages Dropped for p-bit 7"
|
|
::= { rc2kQosStatsEntry 17 }
|
|
|
|
-- 2k Qos PCP Table
|
|
rc2kQosDECoding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ad8p0d(1),
|
|
ad7p1d(2),
|
|
ad6p2d(3),
|
|
m7p1d(4),
|
|
m6p2d(5),
|
|
m5p3d(6),
|
|
dei(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This indicates the DE Coding
|
|
that should be used"
|
|
DEFVAL { ad8p0d }
|
|
::= { rc2kQos 15 }
|
|
|
|
|
|
-- 2k Qos Combine Pass Drop (PnD) Queue Bandwidth
|
|
rc2kQosCombinePassDropQueueBW OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Combine Pass-Drop queue bandwidth"
|
|
DEFVAL { false }
|
|
::= { rc2kQos 16 }
|
|
|
|
|
|
-- 2k Qos Split Pass Drop (PnD) Queue Bandwidth
|
|
rc2kQosSplitPassDropQueueBW OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Split Pass-Drop queue bandwidth"
|
|
DEFVAL { false }
|
|
::= { rc2kQos 17 }
|
|
|
|
|
|
-- 2k Egress Qos PCP Table
|
|
rc2kQosEgressQosPCPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosEgressQosPCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify
|
|
the Priority Code Point table."
|
|
::= { rc2kQos 18 }
|
|
|
|
rc2kQosEgressQosPCPEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosEgressQosPCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of PCP Table"
|
|
INDEX { rc2kQosEgressQosPCPRow }
|
|
::= { rc2kQosEgressQosPCPTable 1 }
|
|
|
|
Rc2kQosEgressQosPCPEntry ::= SEQUENCE {
|
|
rc2kQosEgressQosPCPRow Integer32,
|
|
rc2kQosEgressQosPCPLevel Integer32,
|
|
rc2kQosEgressQosPCPInProfileIeee8021P Integer32,
|
|
rc2kQosEgressQosPCPOutOfProfileIeee8021P Integer32
|
|
}
|
|
|
|
rc2kQosEgressQosPCPRow OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rc2kQosEgressQosPCPEntry 1 }
|
|
|
|
rc2kQosEgressQosPCPLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Qos level"
|
|
::= { rc2kQosEgressQosPCPEntry 2 }
|
|
|
|
rc2kQosEgressQosPCPInProfileIeee8021P OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "In Profile 802.1P"
|
|
::= { rc2kQosEgressQosPCPEntry 3 }
|
|
|
|
rc2kQosEgressQosPCPOutOfProfileIeee8021P OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Out Of Profile 802.1P"
|
|
::= { rc2kQosEgressQosPCPEntry 4 }
|
|
|
|
-- 2k Qos Use-CFI-As-DEI
|
|
rc2kQosUseCfiAsDei OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This indicates whether to use
|
|
CFI bit (for non 88a8 packets)
|
|
as DEI bit or not."
|
|
DEFVAL { false }
|
|
::= { rc2kQos 19 }
|
|
|
|
rc2kQosFOQDropTrapInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time interval indicating how often FOQ drop traps
|
|
should be sent. An interval of 0 disables the traps."
|
|
DEFVAL { 15 }
|
|
::= { rc2kQos 20 }
|
|
|
|
rc2kQosFabricDropTrapInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time interval indicating how often Fabric drop traps
|
|
should be sent. An interval of 0 disables the traps."
|
|
DEFVAL { 15 }
|
|
::= { rc2kQos 21 }
|
|
|
|
rc2kQosTotalDropReadings OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total count of drop samples. This is
|
|
used when sending FOQ/Fabric Drop Traps"
|
|
DEFVAL { 0 }
|
|
::= { rc2kQos 22 }
|
|
|
|
rc2kQosDropReadings OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of drop samples
|
|
within the drop trap time interval.
|
|
This is used when sending FOQ/Fabric
|
|
Drop Traps."
|
|
DEFVAL { 0 }
|
|
::= { rc2kQos 23 }
|
|
|
|
-- 2k QoS Fabric Interface Drop Stats
|
|
|
|
rc2kQosFabricInterfaceStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosFabricInterfaceStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rc2kQos 24 }
|
|
|
|
rc2kQosFabricInterfaceStatsEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosFabricInterfaceStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A Fabric Interface Drop Statistics table entry."
|
|
INDEX { rc2kQosFabricInterfaceStatsSlotNumber,
|
|
rc2kQosFabricInterfaceStatsLaneNumber }
|
|
::= { rc2kQosFabricInterfaceStatsTable 1 }
|
|
|
|
Rc2kQosFabricInterfaceStatsEntry ::=
|
|
SEQUENCE {
|
|
rc2kQosFabricInterfaceStatsSlotNumber Integer32,
|
|
rc2kQosFabricInterfaceStatsLaneNumber Integer32,
|
|
rc2kQosFabricInterfaceStatsFOQDropEvents Counter64,
|
|
rc2kQosFabricInterfaceStatsFOQTotalDropEvents Counter64,
|
|
rc2kQosFabricInterfaceStatsFabricDropEvents Counter64,
|
|
rc2kQosFabricInterfaceStatsFabricTotalDropEvents Counter64
|
|
}
|
|
|
|
rc2kQosFabricInterfaceStatsSlotNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rc2kQosFabricInterfaceStatsEntry 1 }
|
|
|
|
rc2kQosFabricInterfaceStatsLaneNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane number. 0 - Left, 1 - Middle, 2 - Right."
|
|
::= { rc2kQosFabricInterfaceStatsEntry 2 }
|
|
|
|
rc2kQosFabricInterfaceStatsFOQDropEvents OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Count of FOQ drop events occurred
|
|
in this drop-trap time period."
|
|
::= { rc2kQosFabricInterfaceStatsEntry 3 }
|
|
|
|
rc2kQosFabricInterfaceStatsFOQTotalDropEvents OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total count of FOQ drop events"
|
|
::= { rc2kQosFabricInterfaceStatsEntry 4 }
|
|
|
|
rc2kQosFabricInterfaceStatsFabricDropEvents OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Count of Fabric drop events occurred
|
|
in this drop-trap time period."
|
|
::= { rc2kQosFabricInterfaceStatsEntry 5 }
|
|
|
|
rc2kQosFabricInterfaceStatsFabricTotalDropEvents OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total count of Fabric drop events"
|
|
::= { rc2kQosFabricInterfaceStatsEntry 6 }
|
|
|
|
-- 2k Qos Queue Profile Table
|
|
rc2kQosQueueProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosQueueProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify queue profiles
|
|
for the ports to which the profiles will be linked to.
|
|
These queue profiles are used for shaping the egress
|
|
queues of the port by specifying the transmit opportunity
|
|
percentages and rate-limit percentages for each of Tx queues."
|
|
::= { rc2kQos 25 }
|
|
|
|
rc2kQosQueueProfileEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosQueueProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of port egress queue shaping"
|
|
INDEX { rc2kQosQueueProfileId }
|
|
::= { rc2kQosQueueProfileTable 1 }
|
|
|
|
Rc2kQosQueueProfileEntry ::= SEQUENCE {
|
|
rc2kQosQueueProfileId Integer32,
|
|
rc2kQosQueueProfileName DisplayString,
|
|
rc2kQosQueueProfileApply TruthValue,
|
|
rc2kQosQueueProfileRowStatus RowStatus
|
|
}
|
|
rc2kQosQueueProfileId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..5)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies Queue Profile."
|
|
::= { rc2kQosQueueProfileEntry 1 }
|
|
|
|
rc2kQosQueueProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this Queue Profile."
|
|
::= { rc2kQosQueueProfileEntry 2 }
|
|
|
|
rc2kQosQueueProfileApply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "When apply is issued by the administrator,
|
|
the Queue Profile attributes are committed."
|
|
DEFVAL { false }
|
|
::= { rc2kQosQueueProfileEntry 3 }
|
|
|
|
rc2kQosQueueProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rc2kQosQueueProfileEntry 4}
|
|
|
|
-- 2k Qos Queue Table
|
|
rc2kQosQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kQosQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify egress queue
|
|
Weight values and rate-limit enabled/disabled status
|
|
for a particular Tx queue under a specific Queue Profile."
|
|
::= { rc2kQos 26 }
|
|
|
|
rc2kQosQueueEntry OBJECT-TYPE
|
|
SYNTAX Rc2kQosQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of egress queue shaping parameters"
|
|
INDEX { rc2kQosQueuePId,
|
|
rc2kQosQueueId }
|
|
::= { rc2kQosQueueTable 1 }
|
|
|
|
Rc2kQosQueueEntry ::= SEQUENCE {
|
|
rc2kQosQueuePId Integer32,
|
|
rc2kQosQueueId Integer32,
|
|
rc2kQosQueueAdminWeight Integer32,
|
|
rc2kQosQueueOperWeight Integer32,
|
|
rc2kQosQueueAdminRateLimitStatus TruthValue,
|
|
rc2kQosQueueOperRateLimitStatus TruthValue
|
|
}
|
|
rc2kQosQueuePId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..5)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Queue Profile ID under which this queue parameters are set."
|
|
::= { rc2kQosQueueEntry 1 }
|
|
|
|
rc2kQosQueueId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Tx Queue id for which the qos queue parameters are set."
|
|
::= { rc2kQosQueueEntry 2 }
|
|
|
|
rc2kQosQueueAdminWeight OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administrative transmit opportunity percentage for this queue"
|
|
::= { rc2kQosQueueEntry 3 }
|
|
|
|
rc2kQosQueueOperWeight OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operational transmit opportunity percentage for this queue"
|
|
::= { rc2kQosQueueEntry 4}
|
|
|
|
rc2kQosQueueAdminRateLimitStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Administrative rate limit status for this queue"
|
|
DEFVAL { false }
|
|
::= { rc2kQosQueueEntry 5 }
|
|
|
|
rc2kQosQueueOperRateLimitStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operational rate limit staus for this queue"
|
|
DEFVAL { false }
|
|
::= { rc2kQosQueueEntry 6}
|
|
|
|
-- rc2kAtm Group
|
|
|
|
rc2kAtm OBJECT IDENTIFIER ::= { rc2k 9 }
|
|
|
|
rc2kAtmGlobal OBJECT IDENTIFIER ::= { rc2kAtm 1 }
|
|
|
|
|
|
-- Atm Port Table
|
|
|
|
rc2kAtmPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kAtmPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ATM port table"
|
|
::= { rc2kAtm 2 }
|
|
|
|
rc2kAtmPortEntry OBJECT-TYPE
|
|
SYNTAX Rc2kAtmPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of ATM port"
|
|
INDEX { rc2kAtmPortIfIndex }
|
|
::= { rc2kAtmPortTable 1 }
|
|
|
|
Rc2kAtmPortEntry ::= SEQUENCE {
|
|
rc2kAtmPortIfIndex InterfaceIndex,
|
|
rc2kAtmPortNumVpiBits INTEGER,
|
|
rc2kAtmPortNumVciBits INTEGER,
|
|
rc2kAtmPortMediaType INTEGER,
|
|
rc2kAtmPortScrambleEnable TruthValue,
|
|
rc2kAtmPortFramingMode INTEGER,
|
|
rc2kAtmPortClockSource INTEGER,
|
|
rc2kAtmPortLineSpeed INTEGER,
|
|
rc2kAtmPortLoopBackMode INTEGER,
|
|
rc2kAtmPortMacAddress MacAddress
|
|
}
|
|
|
|
rc2kAtmPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port number"
|
|
::= { rc2kAtmPortEntry 1 }
|
|
|
|
rc2kAtmPortNumVpiBits OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "# of vpi bits. For OC3, the max number of vpibits is 6.
|
|
However, for OC12, it is 8. Both media types share
|
|
the same MIB object. "
|
|
::= { rc2kAtmPortEntry 2 }
|
|
|
|
rc2kAtmPortNumVciBits OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "# of vci bits"
|
|
::= { rc2kAtmPortEntry 3 }
|
|
|
|
rc2kAtmPortMediaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
smf(1), -- single mode fiber
|
|
mmf(2), -- mixed mode fiber
|
|
ds3(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "media type"
|
|
::= { rc2kAtmPortEntry 4 }
|
|
|
|
rc2kAtmPortScrambleEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable scramble"
|
|
DEFVAL { false }
|
|
::= { rc2kAtmPortEntry 5 }
|
|
|
|
rc2kAtmPortFramingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonet(1),
|
|
sdh(2),
|
|
ds3CbitAdm(3),
|
|
ds3CbitPlcp(4),
|
|
ds3M23Adm(5),
|
|
ds3M23Plcp(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "port framing mode"
|
|
DEFVAL { sonet }
|
|
::= { rc2kAtmPortEntry 6 }
|
|
|
|
rc2kAtmPortClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
loopTimed(1),
|
|
freeRunning(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "clock source"
|
|
::= { rc2kAtmPortEntry 7 }
|
|
|
|
rc2kAtmPortLineSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
oc3c(1),
|
|
oc12c(2),
|
|
ds3(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "line speed"
|
|
::= { rc2kAtmPortEntry 8 }
|
|
|
|
rc2kAtmPortLoopBackMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
internal(2),
|
|
external(3),
|
|
ds3PayloadLoop(4),
|
|
ds3DiagLoop(5),
|
|
ds3LineLoop(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "loop back mode"
|
|
DEFVAL { off }
|
|
::= { rc2kAtmPortEntry 9 }
|
|
|
|
rc2kAtmPortMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "XLR assigned MAC addr"
|
|
::= { rc2kAtmPortEntry 10 }
|
|
|
|
-- Atm Pvc Table
|
|
|
|
rc2kAtmPvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kAtmPvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ATM Pvc table"
|
|
::= { rc2kAtm 3 }
|
|
|
|
rc2kAtmPvcEntry OBJECT-TYPE
|
|
SYNTAX Rc2kAtmPvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of ATM Pvc"
|
|
INDEX { rc2kAtmPvcIfIndex, rc2kAtmPvcVpi, rc2kAtmPvcVci }
|
|
::= { rc2kAtmPvcTable 1 }
|
|
|
|
Rc2kAtmPvcEntry ::= SEQUENCE {
|
|
rc2kAtmPvcIfIndex InterfaceIndex,
|
|
rc2kAtmPvcVpi INTEGER,
|
|
rc2kAtmPvcVci INTEGER,
|
|
rc2kAtmPvcPvcId Integer32,
|
|
rc2kAtmPvcName DisplayString,
|
|
rc2kAtmPvcEncapsulation INTEGER,
|
|
rc2kAtmPvcServiceType INTEGER,
|
|
rc2kAtmPvcPeakCellRate INTEGER,
|
|
rc2kAtmPvcSustainedCellRate INTEGER,
|
|
rc2kAtmPvcMaxBurstSize INTEGER,
|
|
rc2kAtmPvcRowStatus RowStatus,
|
|
rc2kAtmPvcOamLbMgmtEnable TruthValue,
|
|
rc2kAtmPvcOamLbSendFrequency INTEGER,
|
|
rc2kAtmPvcOamLbRetryFrequency INTEGER,
|
|
rc2kAtmPvcOamLbUpCount INTEGER,
|
|
rc2kAtmPvcOamLbDownCount INTEGER,
|
|
rc2kAtmPvcOamTrapEnable TruthValue,
|
|
rc2kAtmPvcOamVcStatus INTEGER,
|
|
rc2kAtmPvcOamLbRequestSent Counter32,
|
|
rc2kAtmPvcOamLbReplySent Counter32,
|
|
rc2kAtmPvcOamLbReplyReceived Counter32
|
|
}
|
|
|
|
rc2kAtmPvcIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port number"
|
|
::= { rc2kAtmPvcEntry 1 }
|
|
|
|
rc2kAtmPvcVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "vpi of this pvc"
|
|
::= { rc2kAtmPvcEntry 2 }
|
|
|
|
rc2kAtmPvcVci OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "vci of this pvc"
|
|
::= { rc2kAtmPvcEntry 3 }
|
|
|
|
rc2kAtmPvcPvcId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "internal pvc id"
|
|
::= { rc2kAtmPvcEntry 4 }
|
|
|
|
rc2kAtmPvcName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "name of pvc"
|
|
::= { rc2kAtmPvcEntry 5 }
|
|
|
|
rc2kAtmPvcEncapsulation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
null(1),
|
|
llcSnap(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "encapsulation"
|
|
DEFVAL { llcSnap }
|
|
::= { rc2kAtmPvcEntry 6 }
|
|
|
|
rc2kAtmPvcServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ubr(1),
|
|
vbr(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "service type"
|
|
DEFVAL { ubr }
|
|
::= { rc2kAtmPvcEntry 7 }
|
|
|
|
rc2kAtmPvcPeakCellRate OBJECT-TYPE
|
|
SYNTAX INTEGER (86..733490)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Peak cell rate in cells per second. The maximum
|
|
peak cell rate is half of the line rate. The peak
|
|
cell rate for MDA type OC12 must be less than 733491.
|
|
However, for OC3, it is less than 182783."
|
|
DEFVAL { 23584 }
|
|
::= { rc2kAtmPvcEntry 8 }
|
|
|
|
rc2kAtmPvcSustainedCellRate OBJECT-TYPE
|
|
SYNTAX INTEGER (86..733490)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Sustained cell rate in cells per second. The maximum
|
|
peak cell rate is half of the line rate. The peak
|
|
cell rate for MDA type OC12 must be less than 733491.
|
|
However, for OC3, it is less than 182783."
|
|
DEFVAL { 23584 }
|
|
::= { rc2kAtmPvcEntry 9 }
|
|
|
|
rc2kAtmPvcMaxBurstSize OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "max burst size"
|
|
DEFVAL { 255 }
|
|
::= { rc2kAtmPvcEntry 10 }
|
|
|
|
rc2kAtmPvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rc2kAtmPvcEntry 11 }
|
|
|
|
rc2kAtmPvcOamLbMgmtEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether end-to-end F5 OAM loopback is enabled.
|
|
When it is enabled, OAM loopback request is sent
|
|
periodically"
|
|
DEFVAL { true }
|
|
::= { rc2kAtmPvcEntry 12 }
|
|
|
|
rc2kAtmPvcOamLbSendFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of seconds between transmitting OAM loopback
|
|
request"
|
|
DEFVAL { 5 }
|
|
::= { rc2kAtmPvcEntry 13 }
|
|
|
|
rc2kAtmPvcOamLbRetryFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of seconds between retry"
|
|
DEFVAL { 1 }
|
|
::= { rc2kAtmPvcEntry 14 }
|
|
|
|
rc2kAtmPvcOamLbUpCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of consecutive end-to-end F5 OAM loopback cell
|
|
responses that must be received in order to change a
|
|
PVC connection state to up"
|
|
DEFVAL { 3 }
|
|
::= { rc2kAtmPvcEntry 15 }
|
|
|
|
rc2kAtmPvcOamLbDownCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of consecutive end-to-end F5 OAM loopback cell
|
|
responses that are not received in order to change a
|
|
PVC state to down."
|
|
DEFVAL { 5 }
|
|
::= { rc2kAtmPvcEntry 16 }
|
|
|
|
rc2kAtmPvcOamTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate whether OAM trap is enabled. When it is enabled,
|
|
a trap is sent to the management station when
|
|
rc2kAtmPvcOamVcStatus is going up or down."
|
|
DEFVAL { false }
|
|
::= { rc2kAtmPvcEntry 17 }
|
|
|
|
rc2kAtmPvcOamVcStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notManaged(1),
|
|
downVerify(2),
|
|
down(3),
|
|
upVerify(4),
|
|
up(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the status of PVC link.
|
|
Not Managed--VC is not being managed by OAM.
|
|
Down Verify --An OAM loopback failed. End-to-end F5 OAM
|
|
loopback cells are sent at retry frequency to verify
|
|
the VC is really down. After down-count unsuccessful
|
|
retries, the VC goes to the down state (see definition
|
|
of rc2kAtmPvcOamLoopbackDownCount).
|
|
Down --VC has not received responses to by end-to-end
|
|
F5 OAM loopback cells.
|
|
Up Verify -- An OAM loopback was successful.
|
|
End-to-end F5 OAM loopback cells are sent at retry
|
|
frequency to verify the VC is really up. After up-count
|
|
successive and successful loopback retries, the VC
|
|
goes to the Up state (see definition of
|
|
rc2kAtmPvcOamLoopbackUpCount).
|
|
Up - End-to-end loopbacks are successful. "
|
|
::= { rc2kAtmPvcEntry 18 }
|
|
|
|
|
|
rc2kAtmPvcOamLbRequestSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of OAM loopback request sent"
|
|
::= { rc2kAtmPvcEntry 19 }
|
|
|
|
rc2kAtmPvcOamLbReplySent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of OAM loopback reply sent"
|
|
::= { rc2kAtmPvcEntry 20 }
|
|
|
|
rc2kAtmPvcOamLbReplyReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of OAM loopback reply received"
|
|
::= { rc2kAtmPvcEntry 21 }
|
|
|
|
-- Atm 1483Elan Table
|
|
|
|
rc2kAtm1483ElanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kAtm1483ElanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ATM 1483Elan table"
|
|
::= { rc2kAtm 5 }
|
|
|
|
rc2kAtm1483ElanEntry OBJECT-TYPE
|
|
SYNTAX Rc2kAtm1483ElanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of ATM 1483Elan"
|
|
INDEX { rc2kAtm1483ElanIfIndex, rc2kAtm1483ElanVlanId }
|
|
::= { rc2kAtm1483ElanTable 1 }
|
|
|
|
Rc2kAtm1483ElanEntry ::= SEQUENCE {
|
|
rc2kAtm1483ElanIfIndex InterfaceIndex,
|
|
rc2kAtm1483ElanElanId Integer32,
|
|
rc2kAtm1483ElanNumPvcIds INTEGER,
|
|
rc2kAtm1483ElanPvcIds IdList,
|
|
rc2kAtm1483ElanVlanId Integer32,
|
|
rc2kAtm1483ElanRowStatus RowStatus,
|
|
rc2kAtm1483ElanConnectType INTEGER,
|
|
rc2kAtm1483ElanVlanMacAddress MacAddress,
|
|
rc2kAtm1483ElanDummyMacAddress MacAddress,
|
|
rc2kAtm1483ElanLocalIpAddress IpAddress,
|
|
rc2kAtm1483ElanRemoteIpAddress IpAddress,
|
|
rc2kAtm1483ElanInArpSendEnable TruthValue,
|
|
rc2kAtm1483ElanInArpSendInterval INTEGER,
|
|
rc2kAtm1483ElanIpxVlanEncapMethod INTEGER,
|
|
rc2kAtm1483ElanIpxNetworkNum INTEGER,
|
|
rc2kAtm1483ElanStgId Integer32,
|
|
rc2kAtm1483ElanrcStgTaggedBpduVlanId Integer32,
|
|
rc2kAtm1483ElanIpxNetworkAddr OCTET STRING
|
|
}
|
|
|
|
rc2kAtm1483ElanIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port number"
|
|
::= { rc2kAtm1483ElanEntry 1 }
|
|
|
|
rc2kAtm1483ElanElanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Elan Id"
|
|
::= { rc2kAtm1483ElanEntry 2 }
|
|
|
|
rc2kAtm1483ElanNumPvcIds OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "# pvc-ids in list"
|
|
::= { rc2kAtm1483ElanEntry 3 }
|
|
|
|
rc2kAtm1483ElanPvcIds OBJECT-TYPE
|
|
SYNTAX IdList (SIZE (256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "list of pvc-ids. each pvc-id is represented by a
|
|
32 bit value this field can contain a maximum of
|
|
64 pvc-ids."
|
|
::= { rc2kAtm1483ElanEntry 4 }
|
|
|
|
rc2kAtm1483ElanVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "vlan tag for this 1483"
|
|
::= { rc2kAtm1483ElanEntry 5 }
|
|
|
|
rc2kAtm1483ElanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rc2kAtm1483ElanEntry 6 }
|
|
|
|
rc2kAtm1483ElanConnectType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bridged(1),
|
|
ip(2),
|
|
ipx(3),
|
|
muxIpIpx(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "connection type"
|
|
::= { rc2kAtm1483ElanEntry 7 }
|
|
|
|
rc2kAtm1483ElanVlanMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "mac for vlan"
|
|
::= { rc2kAtm1483ElanEntry 8 }
|
|
|
|
rc2kAtm1483ElanDummyMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "dummy mac for the other router"
|
|
::= { rc2kAtm1483ElanEntry 9 }
|
|
|
|
rc2kAtm1483ElanLocalIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "local ip, if ConnectType is ip(2)"
|
|
::= { rc2kAtm1483ElanEntry 10 }
|
|
|
|
rc2kAtm1483ElanRemoteIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "remote ip, if ConnectType is ip(2)"
|
|
::= { rc2kAtm1483ElanEntry 11 }
|
|
|
|
rc2kAtm1483ElanInArpSendEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable arp sending on the port, if
|
|
ConnectType is ip(2)"
|
|
DEFVAL { false }
|
|
::= { rc2kAtm1483ElanEntry 12 }
|
|
|
|
rc2kAtm1483ElanInArpSendInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "interval of arp sending on the port, if
|
|
ConnectType is ip(2)"
|
|
::= { rc2kAtm1483ElanEntry 13 }
|
|
|
|
rc2kAtm1483ElanIpxVlanEncapMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
llc(1),
|
|
snap(2),
|
|
ether-ii(3),
|
|
raw(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "vlan encapsulation method, if ConnectType
|
|
is ipx(3)"
|
|
::= { rc2kAtm1483ElanEntry 14 }
|
|
|
|
rc2kAtm1483ElanIpxNetworkNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "network number, if ConnectType is ipx(3)"
|
|
::= { rc2kAtm1483ElanEntry 15 }
|
|
|
|
rc2kAtm1483ElanStgId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An identifier used to identify a STG in the device,
|
|
only in bridge mode"
|
|
::= { rc2kAtm1483ElanEntry 16 }
|
|
|
|
rc2kAtm1483ElanrcStgTaggedBpduVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The VLAN ID to be used for tagging BPDUs,
|
|
only in bridge mode."
|
|
::= { rc2kAtm1483ElanEntry 17 }
|
|
|
|
rc2kAtm1483ElanIpxNetworkAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "network number, instead of rc2kAtm1483ElanIpxNetworkNum"
|
|
::= { rc2kAtm1483ElanEntry 18 }
|
|
|
|
|
|
-- 2kAtm Sio Card Config Table
|
|
|
|
rc2kAtmSioCardConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kAtmSioCardConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2kAtm Sio Card Config Table"
|
|
::= { rc2kAtm 8 }
|
|
|
|
rc2kAtmSioCardConfigEntry OBJECT-TYPE
|
|
SYNTAX Rc2kAtmSioCardConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 2kAtm Sio Card Config."
|
|
INDEX { rc2kAtmSioCardConfigSlotIndex }
|
|
::= { rc2kAtmSioCardConfigTable 1 }
|
|
|
|
Rc2kAtmSioCardConfigEntry ::= SEQUENCE {
|
|
rc2kAtmSioCardConfigSlotIndex Integer32,
|
|
rc2kAtmSioCardConfigAction INTEGER,
|
|
rc2kAtmSioCardConfigTraceMode INTEGER,
|
|
rc2kAtmSioCardConfigImageFileName DisplayString,
|
|
rc2kAtmSioCardConfigElanStatsEnable INTEGER,
|
|
rc2kAtmSioCardConfigStatsPollPeriod INTEGER
|
|
}
|
|
|
|
rc2kAtmSioCardConfigSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot Index."
|
|
::= { rc2kAtmSioCardConfigEntry 1 }
|
|
|
|
rc2kAtmSioCardConfigAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
reset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rc2kAtmSioCardConfigEntry 2 }
|
|
|
|
rc2kAtmSioCardConfigTraceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
traceOn(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rc2kAtmSioCardConfigEntry 3 }
|
|
|
|
rc2kAtmSioCardConfigImageFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ATM Image file name."
|
|
::= { rc2kAtmSioCardConfigEntry 4 }
|
|
|
|
rc2kAtmSioCardConfigElanStatsEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Elan Statistics collection"
|
|
DEFVAL { 1 }
|
|
::= { rc2kAtmSioCardConfigEntry 5 }
|
|
|
|
rc2kAtmSioCardConfigStatsPollPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER(3..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval after which Elan statistics would
|
|
be polled"
|
|
DEFVAL { 5 }
|
|
::= { rc2kAtmSioCardConfigEntry 6 }
|
|
|
|
|
|
--- ATM global
|
|
|
|
rc2kAtmElanStatsClearAll OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear all Elan Statistics"
|
|
::= { rc2kAtmGlobal 1}
|
|
|
|
|
|
--- ATM port stats
|
|
|
|
rc2kAtmPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kAtmPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ATM port statistics table"
|
|
::= { rc2kAtm 10 }
|
|
|
|
rc2kAtmPortStatsEntry OBJECT-TYPE
|
|
SYNTAX Rc2kAtmPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of ATM port statistics"
|
|
INDEX { rc2kAtmPortStatsIfIndex }
|
|
::= { rc2kAtmPortStatsTable 1 }
|
|
|
|
Rc2kAtmPortStatsEntry ::= SEQUENCE {
|
|
rc2kAtmPortStatsIfIndex InterfaceIndex,
|
|
rc2kAtmPortStatsInCells Counter64,
|
|
rc2kAtmPortStatsOutCells Counter64,
|
|
rc2kAtmPortStatsOutIdleCells Counter64,
|
|
rc2kAtmPortStatsInHecCorrected Counter32,
|
|
rc2kAtmPortStatsInHecUncorrected Counter32,
|
|
rc2kAtmPortStatsInUnknownProtos Counter32,
|
|
rc2kAtmPortStatsInPkts Counter32,
|
|
rc2kAtmPortStatsOutPkts Counter32,
|
|
rc2kAtmPortStatsInDroppedPkts Counter32,
|
|
rc2kAtmPortStatsOutDroppedPkts Counter32
|
|
}
|
|
|
|
rc2kAtmPortStatsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port number"
|
|
::= { rc2kAtmPortStatsEntry 1 }
|
|
|
|
rc2kAtmPortStatsInCells OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Cells received from ATM interface"
|
|
::= { rc2kAtmPortStatsEntry 2 }
|
|
|
|
rc2kAtmPortStatsOutCells OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Cells transmitted by ATM interface"
|
|
::= { rc2kAtmPortStatsEntry 3 }
|
|
|
|
rc2kAtmPortStatsOutIdleCells OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Idle Cells transmitted"
|
|
::= { rc2kAtmPortStatsEntry 4 }
|
|
|
|
rc2kAtmPortStatsInHecCorrected OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received cells in which HCS
|
|
was corrected"
|
|
::= { rc2kAtmPortStatsEntry 5 }
|
|
|
|
rc2kAtmPortStatsInHecUncorrected OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received cells dropped because HCS
|
|
couldn't be corrected"
|
|
::= { rc2kAtmPortStatsEntry 6 }
|
|
|
|
rc2kAtmPortStatsInUnknownProtos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received cells dropped with wrong VPI/VCI"
|
|
::= { rc2kAtmPortStatsEntry 7 }
|
|
|
|
rc2kAtmPortStatsInPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of AAL5 CPCS PDUs received"
|
|
::= { rc2kAtmPortStatsEntry 8 }
|
|
|
|
rc2kAtmPortStatsOutPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of AAL5 CPCS PDUs transmitted"
|
|
::= { rc2kAtmPortStatsEntry 9 }
|
|
|
|
rc2kAtmPortStatsInDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of AAL5 CPCS PDUs dropped due to
|
|
resource exhaustion"
|
|
::= { rc2kAtmPortStatsEntry 10 }
|
|
|
|
rc2kAtmPortStatsOutDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of AAL5 CPCS PDUs dropped because the
|
|
transmitter closed the channel"
|
|
::= { rc2kAtmPortStatsEntry 11 }
|
|
|
|
-- ATM vPort Stats
|
|
|
|
rc2kAtmVPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kAtmVPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ATM Elan statistics table"
|
|
::= { rc2kAtm 11 }
|
|
|
|
rc2kAtmVPortStatsEntry OBJECT-TYPE
|
|
SYNTAX Rc2kAtmVPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of ATM Elan statistics"
|
|
INDEX { rc2kAtmVPortStatsIfIndex , rc2kAtmVPortStatsVlanId }
|
|
::= { rc2kAtmVPortStatsTable 1 }
|
|
|
|
Rc2kAtmVPortStatsEntry ::= SEQUENCE {
|
|
rc2kAtmVPortStatsIfIndex InterfaceIndex,
|
|
rc2kAtmVPortStatsVlanId Integer32,
|
|
rc2kAtmVPortStatsClear INTEGER,
|
|
rc2kAtmVPortStatsInOctets Counter64,
|
|
rc2kAtmVPortStatsOutOctets Counter64,
|
|
rc2kAtmVPortStatsInErrors Counter32,
|
|
rc2kAtmVPortStatsOutErrors Counter32,
|
|
rc2kAtmVPortStatsInDiscards Counter32,
|
|
rc2kAtmVPortStatsOutDiscards Counter32,
|
|
rc2kAtmVPortStatsInUcastPkts Counter32,
|
|
rc2kAtmVPortStatsOutUcastPkts Counter32,
|
|
rc2kAtmVPortStatsInMulticastPkts Counter32,
|
|
rc2kAtmVPortStatsOutMulticastPkts Counter32,
|
|
rc2kAtmVPortStatsInBroadcastPkts Counter32,
|
|
rc2kAtmVPortStatsOutBroadcastPkts Counter32
|
|
}
|
|
|
|
rc2kAtmVPortStatsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port number"
|
|
::= { rc2kAtmVPortStatsEntry 1 }
|
|
|
|
rc2kAtmVPortStatsVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id"
|
|
::= { rc2kAtmVPortStatsEntry 2 }
|
|
|
|
rc2kAtmVPortStatsClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other (0),
|
|
clear (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear Elan Stats"
|
|
DEFVAL { 0 }
|
|
::= { rc2kAtmVPortStatsEntry 3 }
|
|
|
|
rc2kAtmVPortStatsInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AAL5 CPCS PDU octects received from ATM interface"
|
|
::= { rc2kAtmVPortStatsEntry 4 }
|
|
|
|
rc2kAtmVPortStatsOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AAL5 CPCS PDU octects transmitted out of ATM interface"
|
|
::= { rc2kAtmVPortStatsEntry 5 }
|
|
|
|
rc2kAtmVPortStatsInErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AAL5 CPCS PDUs received with errors from ATM interface.
|
|
These errors include CRC-32 errors,SAR time-out errors
|
|
And oversized SDU errors"
|
|
::= { rc2kAtmVPortStatsEntry 6 }
|
|
|
|
rc2kAtmVPortStatsOutErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of AAL5 CPCS PDUs that couldn't be transmitted
|
|
due to errors"
|
|
::= { rc2kAtmVPortStatsEntry 7 }
|
|
|
|
rc2kAtmVPortStatsInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of received AAL5 CPCS PDUs discarded "
|
|
::= { rc2kAtmVPortStatsEntry 8 }
|
|
|
|
rc2kAtmVPortStatsOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of AAL5 CPCS PDUs which are to be transmitted
|
|
but discarded"
|
|
::= { rc2kAtmVPortStatsEntry 9 }
|
|
|
|
rc2kAtmVPortStatsInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Received ethernet/IP/IPX packets whose destination
|
|
address is neither a multicast nor a broadcast
|
|
address"
|
|
::= { rc2kAtmVPortStatsEntry 10 }
|
|
|
|
rc2kAtmVPortStatsOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Forwarded ethernet/IP/IPX packets whose destination
|
|
address is neither a multicast nor a broadcast
|
|
address"
|
|
::= { rc2kAtmVPortStatsEntry 11 }
|
|
|
|
rc2kAtmVPortStatsInMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Received ethernet/IP/IPX packets whose destination
|
|
MAC address(or IP address in case of IP ELAN type)
|
|
is multicast MAC address or class D IP address
|
|
(in case of IP ELAN type) "
|
|
::= { rc2kAtmVPortStatsEntry 12 }
|
|
|
|
rc2kAtmVPortStatsOutMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Forwarded ethernet/IP/IPX packets whose destination
|
|
MAC address(or IP address in case of IP ELAN type)
|
|
is multicast MAC address or class D IP address
|
|
(in case of IP ELAN type) "
|
|
::= { rc2kAtmVPortStatsEntry 13 }
|
|
|
|
rc2kAtmVPortStatsInBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Received ethernet/IP/IPX packets whose destination
|
|
address in broadcast address"
|
|
::= { rc2kAtmVPortStatsEntry 14 }
|
|
|
|
rc2kAtmVPortStatsOutBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Forwarded ethernet/IP/IPX packets whose destination
|
|
address in broadcast address"
|
|
::= { rc2kAtmVPortStatsEntry 15 }
|
|
|
|
|
|
-- 2k Mda
|
|
|
|
rc2kMdaCardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kMdaCardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mda card table"
|
|
::= { rc2k 10 }
|
|
|
|
rc2kMdaCardEntry OBJECT-TYPE
|
|
SYNTAX Rc2kMdaCardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Mda card"
|
|
INDEX { rc2kMdaCardSlotNum, rc2kMdaCardMdaNum }
|
|
::= { rc2kMdaCardTable 1 }
|
|
|
|
Rc2kMdaCardEntry ::= SEQUENCE {
|
|
rc2kMdaCardSlotNum INTEGER,
|
|
rc2kMdaCardMdaNum INTEGER,
|
|
rc2kMdaCardType INTEGER,
|
|
rc2kMdaCardDescription DisplayString,
|
|
rc2kMdaCardAdminStatus INTEGER,
|
|
rc2kMdaCardOperStatus INTEGER,
|
|
rc2kMdaCardSerialNum DisplayString,
|
|
rc2kMdaCardHwVersion DisplayString,
|
|
rc2kMdaCardPartNumber DisplayString,
|
|
rc2kMdaCardDateCode DisplayString,
|
|
rc2kMdaCardDeviations DisplayString,
|
|
rc2kMdaCardMacAddr MacAddress,
|
|
rc2kMdaCardNumPorts Integer32,
|
|
rc2kMdaCardFirstIfIndex InterfaceIndex,
|
|
rc2kMdaCardLastIfIndex InterfaceIndex
|
|
}
|
|
|
|
rc2kMdaCardSlotNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Slot number"
|
|
::= { rc2kMdaCardEntry 1 }
|
|
|
|
rc2kMdaCardMdaNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MDA number within slot. MDAs are numbered
|
|
from left to right."
|
|
::= { rc2kMdaCardEntry 2 }
|
|
|
|
rc2kMdaCardType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1), -- no card installed
|
|
rc2k4x100BaseTX(807469572), -- 0011 0000 0010 0001 0000 0010 0000 0100
|
|
rc2k2x100BaseFX(808518146), -- 0011 0000 0011 0001 0000 0010 0000 0010
|
|
rc2k4x100BaseFX(808518148), -- 0011 0000 0011 0001 0000 0010 0000 0100
|
|
rc2k1x1000BaseSXBB(808583681), -- 0011 0000 0011 0010 0000 0010 0000 0001
|
|
rc2k1x1000BaseSXRBB(808616449), -- 0011 0000 0011 0010 1000 0010 0000 0001
|
|
rc2k1x1000BaseLXBB(808591873), -- 0011 0000 0011 0010 0010 0010 0000 0001
|
|
rc2k1x1000BaseLXRBB(808624641), -- 0011 0000 0011 0010 1010 0010 0000 0001
|
|
rc2k4xOc3cBaseSM(542380548), -- 0010 0000 0101 0100 0001 0010 0000 0100
|
|
rc2k4xOc3cBaseMM(542376452), -- 0010 0000 0101 0100 0000 0010 0000 0100
|
|
rc2k4xOc3cBaseCOPPER(542388740), -- 0010 0000 0101 0100 0011 0010 0000 0100
|
|
rc2k1x0c12cBaseSM(542446081), -- 0010 0000 0101 0101 0001 0010 0000 0001
|
|
rc2k1x0c12cBaseMM(542441985), -- 0010 0000 0101 0101 0000 0010 0000 0001
|
|
rc2k2xDs3(542970370), -- 0010 0000 0101 1101 0001 0010 0000 0010
|
|
rc2k2xE3(542839298), -- 0010 0000 0101 1011 0001 0010 0000 0010
|
|
rc2k2xOc3PosBaseMMF(541327874), -- 0010 0000 0100 0100 0000 0010 0000 0010
|
|
rc2k2xOc3PosBaseSMF(541331970), -- 0010 0000 0100 0100 0001 0010 0000 0010
|
|
rc2k1xOc12PosBaseMMF(541393409), -- 0010 0000 0100 0101 0000 0010 0000 0001
|
|
rc2k1xOc12PosBaseSMF(541397505) -- 0010 0000 0100 0101 0001 0010 0000 0001
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Refer to rc2kCardFrontType for the encoding scheme"
|
|
::= { rc2kMdaCardEntry 3 }
|
|
|
|
rc2kMdaCardDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "description of mda card"
|
|
::= { rc2kMdaCardEntry 4 }
|
|
|
|
rc2kMdaCardAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(0),
|
|
down(1),
|
|
testing(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "administration status of mda card"
|
|
::= { rc2kMdaCardEntry 5 }
|
|
|
|
rc2kMdaCardOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(0),
|
|
down(1),
|
|
testing(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "operation status of mda card."
|
|
::= { rc2kMdaCardEntry 6 }
|
|
|
|
rc2kMdaCardSerialNum OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "serial number of mad card"
|
|
::= { rc2kMdaCardEntry 7 }
|
|
|
|
rc2kMdaCardHwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "hardware version of mda card"
|
|
::= { rc2kMdaCardEntry 8 }
|
|
|
|
rc2kMdaCardPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "part number of mda card"
|
|
::= { rc2kMdaCardEntry 9 }
|
|
|
|
rc2kMdaCardDateCode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "date code of mda card"
|
|
::= { rc2kMdaCardEntry 10 }
|
|
|
|
rc2kMdaCardDeviations OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "hardware deviation information of mda card"
|
|
::= { rc2kMdaCardEntry 11 }
|
|
|
|
rc2kMdaCardMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "base mac address of mda card"
|
|
::= { rc2kMdaCardEntry 12 }
|
|
|
|
rc2kMdaCardNumPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of ports on mda card"
|
|
::= { rc2kMdaCardEntry 13 }
|
|
|
|
rc2kMdaCardFirstIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "first ifindex number on mda card"
|
|
::= { rc2kMdaCardEntry 14 }
|
|
|
|
rc2kMdaCardLastIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "last ifindex number on mda card"
|
|
::= { rc2kMdaCardEntry 15 }
|
|
|
|
-- 2k CPU Ethernet Port Route table
|
|
|
|
rc2kCpuEthernetPortRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kCpuEthernetPortRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k CPU Ethernet Port Route table"
|
|
::= { rc2k 11 }
|
|
|
|
rc2kCpuEthernetPortRouteEntry OBJECT-TYPE
|
|
SYNTAX Rc2kCpuEthernetPortRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 2k CPU Ethernet Port"
|
|
INDEX { rc2kCpuEthernetPortRouteNetwork, rc2kCpuEthernetPortRouteGateway}
|
|
::= { rc2kCpuEthernetPortRouteTable 1 }
|
|
|
|
Rc2kCpuEthernetPortRouteEntry ::= SEQUENCE {
|
|
rc2kCpuEthernetPortRouteNetwork IpAddress,
|
|
rc2kCpuEthernetPortRouteGateway IpAddress,
|
|
rc2kCpuEthernetPortRouteRowStatus RowStatus
|
|
}
|
|
|
|
rc2kCpuEthernetPortRouteNetwork OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the network that can be
|
|
used to remotely manage this device."
|
|
::= { rc2kCpuEthernetPortRouteEntry 1 }
|
|
|
|
rc2kCpuEthernetPortRouteGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the the IP address of the
|
|
gateway that should be used to forward IP
|
|
traffic."
|
|
::= { rc2kCpuEthernetPortRouteEntry 2 }
|
|
|
|
rc2kCpuEthernetPortRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rc2kCpuEthernetPortRouteEntry 3 }
|
|
|
|
rc2kCPUTypeGeneralGroup OBJECT IDENTIFIER ::= { rc2k 12 }
|
|
|
|
rc2kCPUTypePrimary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cpu8690Default(1),
|
|
cpu8690Upgrade(2),
|
|
cpu8691Default(3),
|
|
cpu8691Upgrade(4),
|
|
cpu8692Default(5),
|
|
cpu8692SuperMezz(6),
|
|
cpu8695Default(7),
|
|
cpu8895Default(8),
|
|
undefined(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to identify the type of primary CPU"
|
|
::= { rc2kCPUTypeGeneralGroup 1 }
|
|
|
|
rc2kCPUTypeSecondary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cpu8690Default(1),
|
|
cpu8690Upgrade(2),
|
|
cpu8691Default(3),
|
|
cpu8691Upgrade(4),
|
|
cpu8692Default(5),
|
|
cpu8692SuperMezz(6),
|
|
cpu8695Default(7),
|
|
cpu8895Default(8),
|
|
undefined(255)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to identify the type of secondary CPU"
|
|
::= { rc2kCPUTypeGeneralGroup 2 }
|
|
|
|
rc2kCPUTypePrimaryMemory OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mem64MB(1),
|
|
mem128MB(2),
|
|
mem256MB(3),
|
|
mem512MB(4),
|
|
mem1024MB(5),
|
|
undefined(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to get the memory size of Primary CPU"
|
|
::= { rc2kCPUTypeGeneralGroup 3 }
|
|
|
|
rc2kCPUTypeSecondaryMemory OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mem64MB(1),
|
|
mem128MB(2),
|
|
mem256MB(3),
|
|
mem512MB(4),
|
|
mem1024MB(5),
|
|
undefined(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to get the memory size of Secondary CPU"
|
|
::= { rc2kCPUTypeGeneralGroup 4 }
|
|
|
|
-- 2k CPU Ethernet Port Route table for Ipv6
|
|
|
|
rc2kCpuEthernetPortIpv6RouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kCpuEthernetPortIpv6RouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "2k CPU Ethernet Port Route table for Ipv6"
|
|
::= { rc2k 13 }
|
|
|
|
rc2kCpuEthernetPortIpv6RouteEntry OBJECT-TYPE
|
|
SYNTAX Rc2kCpuEthernetPortIpv6RouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of 2k CPU Ethernet Port Ipv6"
|
|
INDEX { rc2kCpuEthernetPortIpv6RouteNetwork,
|
|
rc2kCpuEthernetPortIpv6RoutePrefixLength,
|
|
rc2kCpuEthernetPortIpv6RouteGateway}
|
|
::= { rc2kCpuEthernetPortIpv6RouteTable 1 }
|
|
|
|
Rc2kCpuEthernetPortIpv6RouteEntry ::= SEQUENCE {
|
|
rc2kCpuEthernetPortIpv6RouteNetwork Ipv6Address,
|
|
rc2kCpuEthernetPortIpv6RoutePrefixLength INTEGER,
|
|
rc2kCpuEthernetPortIpv6RouteGateway Ipv6Address,
|
|
rc2kCpuEthernetPortIpv6RouteRowStatus RowStatus
|
|
}
|
|
|
|
rc2kCpuEthernetPortIpv6RouteNetwork OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the ipv6 network that can be
|
|
used to remotely manage this device."
|
|
::= { rc2kCpuEthernetPortIpv6RouteEntry 1 }
|
|
|
|
rc2kCpuEthernetPortIpv6RoutePrefixLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The length of the prefix (in bits)."
|
|
::= { rc2kCpuEthernetPortIpv6RouteEntry 2 }
|
|
|
|
rc2kCpuEthernetPortIpv6RouteGateway OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the the IPv6 address of the
|
|
gateway that should be used to forward IPv6
|
|
traffic."
|
|
::= { rc2kCpuEthernetPortIpv6RouteEntry 3 }
|
|
|
|
rc2kCpuEthernetPortIpv6RouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "row status"
|
|
::= { rc2kCpuEthernetPortIpv6RouteEntry 4 }
|
|
|
|
--
|
|
-- RTM Info for 8011co (Tripod) chassis
|
|
--
|
|
rc2kCardModTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kCardModEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "RTM info table"
|
|
::= { rc2k 14 }
|
|
|
|
rc2kCardModEntry OBJECT-TYPE
|
|
SYNTAX Rc2kCardModEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing RTM information"
|
|
INDEX { rc2kCardModIndex }
|
|
::= { rc2kCardModTable 1 }
|
|
|
|
Rc2kCardModEntry ::= SEQUENCE {
|
|
rc2kCardModIndex Integer32,
|
|
rc2kCardModPresent TruthValue,
|
|
rc2kCardModType INTEGER,
|
|
rc2kCardModDescription DisplayString,
|
|
rc2kCardModSerialNum DisplayString,
|
|
rc2kCardModHwVersion DisplayString,
|
|
rc2kCardModPartNumber DisplayString,
|
|
rc2kCardModDateCode DisplayString,
|
|
rc2kCardModDeviations DisplayString,
|
|
rc2kCardModCpldId Integer32,
|
|
rc2kCardModCpldRev Integer32
|
|
}
|
|
|
|
rc2kCardModIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..11)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "slot number."
|
|
::= { rc2kCardModEntry 1 }
|
|
|
|
rc2kCardModPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates if the RTM in this slot is present"
|
|
DEFVAL { false }
|
|
::= { rc2kCardModEntry 2 }
|
|
|
|
rc2kCardModType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
lc(1627267328), -- 0x60FE2100
|
|
cpu56(1627259136), -- 0x60FE0100
|
|
cpur(1627263232) -- 0x60FE1100
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTM type"
|
|
::= { rc2kCardModEntry 3 }
|
|
|
|
rc2kCardModDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTM description"
|
|
::= { rc2kCardModEntry 4 }
|
|
|
|
rc2kCardModSerialNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTM serial number"
|
|
::= { rc2kCardModEntry 5 }
|
|
|
|
rc2kCardModHwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTM hardware version"
|
|
::= { rc2kCardModEntry 6 }
|
|
|
|
rc2kCardModPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTM part number"
|
|
::= { rc2kCardModEntry 7 }
|
|
|
|
rc2kCardModDateCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTM date code"
|
|
::= { rc2kCardModEntry 8 }
|
|
|
|
rc2kCardModDeviations OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTM deviations"
|
|
::= { rc2kCardModEntry 9 }
|
|
|
|
rc2kCardModCpldId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTM CPLD ID value"
|
|
::= { rc2kCardModEntry 10 }
|
|
|
|
rc2kCardModCpldRev OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RTM CPLD revision value"
|
|
::= { rc2kCardModEntry 11 }
|
|
|
|
--
|
|
-- COP Utilization
|
|
--
|
|
rc2kCardPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kCardPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table represents the Card/Slot level DRAM
|
|
size, DRAM Used, DRAM Free and CPU Utilization
|
|
for the R Module and RC Module cards"
|
|
::= { rc2k 15 }
|
|
|
|
rc2kCardPerfEntry OBJECT-TYPE
|
|
SYNTAX Rc2kCardPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Card performance"
|
|
INDEX { rc2kCardPerfId }
|
|
::= { rc2kCardPerfTable 1 }
|
|
|
|
Rc2kCardPerfEntry ::= SEQUENCE {
|
|
rc2kCardPerfId INTEGER,
|
|
rc2kCardPerfDramSize Integer32,
|
|
rc2kCardPerfDramUsed Integer32,
|
|
rc2kCardPerfDramFree Integer32,
|
|
rc2kCardPerfCPUUtilization Integer32
|
|
}
|
|
|
|
rc2kCardPerfId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This represents the slot number.
|
|
This is only for line cards, slot 5 and 6 should not be used."
|
|
::= { rc2kCardPerfEntry 1 }
|
|
|
|
rc2kCardPerfDramSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This represents DRAM Size in Mega bytes"
|
|
::= { rc2kCardPerfEntry 2 }
|
|
|
|
rc2kCardPerfDramUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This represents the amount of DRAM used in kilo bytes"
|
|
::= { rc2kCardPerfEntry 3 }
|
|
|
|
rc2kCardPerfDramFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This represents the amount of DRAM Free in kilo bytes"
|
|
::= { rc2kCardPerfEntry 4 }
|
|
|
|
rc2kCardPerfCPUUtilization OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This represents the percentage of CPU utilization"
|
|
::= { rc2kCardPerfEntry 5 }
|
|
|
|
rc2kSysAggrRateLimiterStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kSysAggrRateLimiterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table represents the Card/Slot level Aggregate rate limiter stats for power ranger cards."
|
|
::= { rc2k 16 }
|
|
|
|
rc2kSysAggrRateLimiterStatsEntry OBJECT-TYPE
|
|
SYNTAX Rc2kSysAggrRateLimiterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Card/Slot level Aggregate rate limiter stats for power ranger cards indexed by slot number"
|
|
INDEX { rc2kSysAggrRateLimiterStatsId }
|
|
::= { rc2kSysAggrRateLimiterStatsTable 1 }
|
|
|
|
Rc2kSysAggrRateLimiterStatsEntry ::= SEQUENCE {
|
|
rc2kSysAggrRateLimiterStatsId INTEGER,
|
|
rc2kSysAggrRateLimiterIngGreenLane0 Integer32,
|
|
rc2kSysAggrRateLimiterIngRedLane0 Integer32,
|
|
rc2kSysAggrRateLimiterEgrGreenLane0 Integer32,
|
|
rc2kSysAggrRateLimiterEgrRedLane0 Integer32,
|
|
rc2kSysAggrRateLimiterIngGreenLane1 Integer32,
|
|
rc2kSysAggrRateLimiterIngRedLane1 Integer32,
|
|
rc2kSysAggrRateLimiterEgrGreenLane1 Integer32,
|
|
rc2kSysAggrRateLimiterEgrRedLane1 Integer32,
|
|
rc2kSysAggrRateLimiterIngGreenLane2 Integer32,
|
|
rc2kSysAggrRateLimiterIngRedLane2 Integer32,
|
|
rc2kSysAggrRateLimiterEgrGreenLane2 Integer32,
|
|
rc2kSysAggrRateLimiterEgrRedLane2 Integer32,
|
|
rc2kSysAggrRateLimiterStatsClear Integer32
|
|
}
|
|
|
|
rc2kSysAggrRateLimiterStatsId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This represents the slot number. This is only for line cards, slot 5 and 6 should not be used."
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 1 }
|
|
|
|
rc2kSysAggrRateLimiterIngGreenLane0 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets passed or marked green by the Ingress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 2 }
|
|
|
|
rc2kSysAggrRateLimiterIngRedLane0 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets dropped or marked red by the Ingress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 3 }
|
|
|
|
rc2kSysAggrRateLimiterEgrGreenLane0 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets passed or marked green by the Egress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 4 }
|
|
|
|
rc2kSysAggrRateLimiterEgrRedLane0 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets dropped or marked red by the Egress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 5 }
|
|
|
|
|
|
rc2kSysAggrRateLimiterIngGreenLane1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets passed or marked green by the Ingress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 6 }
|
|
|
|
rc2kSysAggrRateLimiterIngRedLane1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets dropped or marked red by the Ingress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 7 }
|
|
|
|
rc2kSysAggrRateLimiterEgrGreenLane1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets passed or marked green by the Egress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 8 }
|
|
|
|
rc2kSysAggrRateLimiterEgrRedLane1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets dropped or marked red by the Egress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 9 }
|
|
|
|
|
|
rc2kSysAggrRateLimiterIngGreenLane2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets passed or marked green by the Ingress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 10 }
|
|
|
|
rc2kSysAggrRateLimiterIngRedLane2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets dropped or marked red by the Ingress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 11 }
|
|
|
|
rc2kSysAggrRateLimiterEgrGreenLane2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets passed or marked green by the Egress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 12 }
|
|
|
|
rc2kSysAggrRateLimiterEgrRedLane2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets dropped or marked red by the Egress Aggregate rate limiter"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 13 }
|
|
|
|
rc2kSysAggrRateLimiterStatsClear OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear the Aggregate Rate limiter Stats"
|
|
::= { rc2kSysAggrRateLimiterStatsEntry 14 }
|
|
|
|
-- slot power usage info
|
|
|
|
rc2kPowerConsumptionInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kPowerConsumptionInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Power consumption info table for all slots"
|
|
::= { rc2k 17 }
|
|
|
|
rc2kPowerConsumptionInfoEntry OBJECT-TYPE
|
|
SYNTAX Rc2kPowerConsumptionInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing power consumption information of
|
|
the slot"
|
|
INDEX { rc2kPowerConsumptionInfoIndex}
|
|
::= { rc2kPowerConsumptionInfoTable 1 }
|
|
|
|
Rc2kPowerConsumptionInfoEntry ::= SEQUENCE {
|
|
rc2kPowerConsumptionInfoIndex Integer32,
|
|
rc2kPowerConsumptionInfoPowerStatus INTEGER,
|
|
rc2kPowerConsumptionInfoBasePower Integer32,
|
|
rc2kPowerConsumptionInfoConsumedPower Integer32,
|
|
rc2kPowerConsumptionInfoPowerPriority INTEGER,
|
|
rc2kPowerConsumptionInfoSlotDescription DisplayString,
|
|
rc2kPowerConsumptionInfoCardDescription DisplayString
|
|
}
|
|
|
|
rc2kPowerConsumptionInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot number."
|
|
::= { rc2kPowerConsumptionInfoEntry 1 }
|
|
|
|
rc2kPowerConsumptionInfoPowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Power operation status of this slot"
|
|
::= { rc2kPowerConsumptionInfoEntry 2 }
|
|
|
|
rc2kPowerConsumptionInfoBasePower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The base power required for this slot"
|
|
::= { rc2kPowerConsumptionInfoEntry 3 }
|
|
|
|
rc2kPowerConsumptionInfoConsumedPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The actual consumed power of this slot.
|
|
Value will be set zero when Power status is 'off'
|
|
rc2kPowerConsumptionInfoPowerStatus"
|
|
::= { rc2kPowerConsumptionInfoEntry 4 }
|
|
|
|
rc2kPowerConsumptionInfoPowerPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
critical(1),
|
|
high(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the priority of the slot for power
|
|
management"
|
|
::= { rc2kPowerConsumptionInfoEntry 5 }
|
|
|
|
rc2kPowerConsumptionInfoSlotDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "User to indicate the slot type information.
|
|
Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc"
|
|
::= { rc2kPowerConsumptionInfoEntry 6 }
|
|
|
|
rc2kPowerConsumptionInfoCardDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Hardware description of this card"
|
|
::= { rc2kPowerConsumptionInfoEntry 7 }
|
|
|
|
--
|
|
-- Card Temperature MIB Table
|
|
--
|
|
|
|
rc2kTemperatureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for retrieving the temperatures
|
|
of each card (CP, IO, SF) on the chassis"
|
|
::= { rc2k 18 }
|
|
|
|
rc2kTemperatureEntry OBJECT-TYPE
|
|
SYNTAX Rc2kTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding the temperature of
|
|
each slot (CP, IO and SF) on the chassis."
|
|
INDEX { rc2kTemperatureSlotIndex }
|
|
::= { rc2kTemperatureTable 1 }
|
|
|
|
Rc2kTemperatureEntry ::=
|
|
SEQUENCE {
|
|
rc2kTemperatureSlotIndex Integer32,
|
|
rc2kTemperatureSlotDescription DisplayString,
|
|
rc2kTemperatureZone1Temperature Gauge32,
|
|
rc2kTemperatureZone2Temperature Gauge32,
|
|
rc2kTemperatureZone3Temperature Gauge32,
|
|
rc2kTemperatureZone4Temperature Gauge32,
|
|
rc2kTemperatureZone5Temperature Gauge32,
|
|
rc2kTemperatureHighTemperature Gauge32,
|
|
rc2kTemperatureLowTemperature Gauge32,
|
|
rc2kTemperatureAlarmThreshold Gauge32,
|
|
rc2kTemperatureShutdownThreshold Gauge32
|
|
}
|
|
|
|
rc2kTemperatureSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..12 | 21..26)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot number of either a CP (1,2) or IO (3-12)
|
|
or SF (21-26)."
|
|
::= { rc2kTemperatureEntry 1 }
|
|
|
|
rc2kTemperatureSlotDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the slot type information.
|
|
Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc."
|
|
::= { rc2kTemperatureEntry 2 }
|
|
|
|
rc2kTemperatureZone1Temperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Zone 1 temperature measured in celsius degree"
|
|
::= { rc2kTemperatureEntry 3 }
|
|
|
|
rc2kTemperatureZone2Temperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Zone 2 temperature measured in celsius degree.
|
|
A value of 0 for this mib object indicates that
|
|
Zone 2 is not available on this slot."
|
|
::= { rc2kTemperatureEntry 4 }
|
|
|
|
rc2kTemperatureZone3Temperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Zone 3 temperature measured in celsius degree.
|
|
A value of 0 for this mib object indicates that
|
|
Zone 3 is not available on this slot."
|
|
::= { rc2kTemperatureEntry 5 }
|
|
|
|
rc2kTemperatureZone4Temperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Zone 4 temperature measured in celsius degree"
|
|
::= { rc2kTemperatureEntry 6 }
|
|
|
|
rc2kTemperatureZone5Temperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Zone 5 temperature measured in celsius degree.
|
|
A value of 0 for this mib object indicates that
|
|
Zone 5 is not available on this slot."
|
|
::= { rc2kTemperatureEntry 7 }
|
|
|
|
rc2kTemperatureHighTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Highest temperature measured in celsius degree"
|
|
::= { rc2kTemperatureEntry 8 }
|
|
|
|
rc2kTemperatureLowTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Lowest temperature measured in celsius degree"
|
|
::= { rc2kTemperatureEntry 9 }
|
|
|
|
rc2kTemperatureAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When the card temperature crosses this
|
|
threshold, an alarm will be set."
|
|
::= { rc2kTemperatureEntry 10 }
|
|
|
|
rc2kTemperatureShutdownThreshold OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When the card temperature crosses this
|
|
threshold, the card will be shutdown."
|
|
::= { rc2kTemperatureEntry 11 }
|
|
|
|
--
|
|
-- USB MIB Table
|
|
--
|
|
|
|
rc2kUsbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kUsbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for retrieving the data for
|
|
the USBs inserted on the chassis"
|
|
::= { rc2k 19 }
|
|
|
|
rc2kUsbEntry OBJECT-TYPE
|
|
SYNTAX Rc2kUsbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding the data for
|
|
USBs inserted on the chassis"
|
|
INDEX { rc2kUsbSlotIndex }
|
|
::= { rc2kUsbTable 1 }
|
|
|
|
Rc2kUsbEntry ::=
|
|
SEQUENCE {
|
|
rc2kUsbSlotIndex Integer32,
|
|
rc2kUsbSlotDescription DisplayString,
|
|
rc2kUsbVendorId DisplayString,
|
|
rc2kUsbManufacturer DisplayString,
|
|
rc2kUsbProductId DisplayString,
|
|
rc2kUsbProductName DisplayString,
|
|
rc2kUsbSerialNumber DisplayString,
|
|
rc2kUsbRevision DisplayString,
|
|
rc2kUsbMaxCurrent Integer32
|
|
}
|
|
|
|
rc2kUsbSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot number of CP in which USB is inserted."
|
|
::= { rc2kUsbEntry 1 }
|
|
|
|
rc2kUsbSlotDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the slot type information.
|
|
Such as, 'Slot1'..'Slot2."
|
|
::= { rc2kUsbEntry 2 }
|
|
|
|
rc2kUsbVendorId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Vendor Id for the inserted USB.
|
|
Value is assigned by USB-IF."
|
|
::= { rc2kUsbEntry 3 }
|
|
|
|
rc2kUsbManufacturer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Manufacturer for the inserted USB."
|
|
::= { rc2kUsbEntry 4 }
|
|
|
|
rc2kUsbProductId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Product Id for the inserted USB.
|
|
Value is assigned by manufacturer."
|
|
::= { rc2kUsbEntry 5 }
|
|
|
|
rc2kUsbProductName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Product Name for the inserted USB."
|
|
::= { rc2kUsbEntry 6 }
|
|
|
|
rc2kUsbSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Serial Number for the inserted USB."
|
|
::= { rc2kUsbEntry 7 }
|
|
|
|
rc2kUsbRevision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the release number for the inserted USB."
|
|
::= { rc2kUsbEntry 8 }
|
|
|
|
rc2kUsbMaxCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliamps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Returns the Max Power as defined by specification
|
|
for the inserted USB. The units are milliamps."
|
|
::= { rc2kUsbEntry 9 }
|
|
|
|
|
|
-- Forwarding Slice specific Asic Info Table.
|
|
|
|
rc2kCardAsicInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kCardAsicInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table that contains asic information that
|
|
is specific to a forwarding slice on a
|
|
second generation IO module."
|
|
::= { rc2k 20 }
|
|
|
|
rc2kCardAsicInfoEntry OBJECT-TYPE
|
|
SYNTAX Rc2kCardAsicInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Second Generation Card attributes"
|
|
INDEX { rc2kCardAsicInfoIndex,
|
|
rc2kCardAsicInfoForwardingSlice }
|
|
::= { rc2kCardAsicInfoTable 1 }
|
|
|
|
Rc2kCardAsicInfoEntry ::=
|
|
SEQUENCE {
|
|
rc2kCardAsicInfoIndex Integer32,
|
|
rc2kCardAsicInfoForwardingSlice Integer32,
|
|
rc2kCardAsicInfoQE DisplayString,
|
|
rc2kCardAsicInfoZagrosFpga DisplayString,
|
|
rc2kCardAsicInfoRsp DisplayString,
|
|
rc2kCardAsicInfoPhyRev DisplayString
|
|
}
|
|
|
|
rc2kCardAsicInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique value for each module within the chassis.
|
|
This value is determined by the chassis slot number
|
|
where the module is inserted. Valid entries are 3
|
|
to the value of rcChasNumSlots"
|
|
::= { rc2kCardAsicInfoEntry 1 }
|
|
|
|
rc2kCardAsicInfoForwardingSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique value for each forwarding slice on the card."
|
|
::= { rc2kCardAsicInfoEntry 2 }
|
|
|
|
rc2kCardAsicInfoQE OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "QE version for the forwarding slice on IO card"
|
|
::= { rc2kCardAsicInfoEntry 3 }
|
|
|
|
rc2kCardAsicInfoZagrosFpga OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Zagros FPGA for the forwarding slice on IO card"
|
|
::= { rc2kCardAsicInfoEntry 4 }
|
|
|
|
rc2kCardAsicInfoRsp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RSP for the forwarding slice on IO card"
|
|
::= { rc2kCardAsicInfoEntry 5 }
|
|
|
|
rc2kCardAsicInfoPhyRev OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PHY revision for the forwarding slice on IO card"
|
|
::= { rc2kCardAsicInfoEntry 6 }
|
|
|
|
|
|
-- IO Card (Generation 2) Temperature Table.
|
|
|
|
rc2kIoCardTemperatureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kIoCardTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for retrieving the temperatures the sensors
|
|
located on the FPGA's and FA's on the generation 2
|
|
IO cards."
|
|
::= { rc2k 21 }
|
|
|
|
rc2kIoCardTemperatureEntry OBJECT-TYPE
|
|
SYNTAX Rc2kIoCardTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding the temperatures of
|
|
FPGA's and FA's on the generation 2 IO cards."
|
|
INDEX { rc2kIoCardTemperatureSlotIndex }
|
|
::= { rc2kIoCardTemperatureTable 1 }
|
|
|
|
Rc2kIoCardTemperatureEntry ::=
|
|
SEQUENCE {
|
|
rc2kIoCardTemperatureSlotIndex Integer32,
|
|
rc2kIoCardTemperatureFPGASensor1Temperature Integer32,
|
|
rc2kIoCardTemperatureFPGASensor2Temperature Integer32,
|
|
rc2kIoCardTemperatureFPGASensor3Temperature Integer32,
|
|
rc2kIoCardTemperatureFPGASensor4Temperature Integer32,
|
|
rc2kIoCardTemperatureFPGASensor5Temperature Integer32,
|
|
rc2kIoCardTemperatureFPGASensor6Temperature Integer32,
|
|
rc2kIoCardTemperatureFPGASensor7Temperature Integer32,
|
|
rc2kIoCardTemperatureFPGASensor8Temperature Integer32,
|
|
rc2kIoCardTemperatureFPGASensor9Temperature Integer32,
|
|
rc2kIoCardTemperatureFPGAZoneHighTemperature Integer32,
|
|
rc2kIoCardTemperatureFPGAZoneLowTemperature Integer32,
|
|
rc2kIoCardTemperatureFPGAZoneAlarmThreshold Integer32,
|
|
rc2kIoCardTemperatureFPGAZoneShutdownThreshold Integer32,
|
|
rc2kIoCardTemperatureFASensor1Temperature Integer32,
|
|
rc2kIoCardTemperatureFASensor2Temperature Integer32,
|
|
rc2kIoCardTemperatureFASensor3Temperature Integer32,
|
|
rc2kIoCardTemperatureFAZoneHighTemperature Integer32,
|
|
rc2kIoCardTemperatureFAZoneLowTemperature Integer32,
|
|
rc2kIoCardTemperatureFAZoneAlarmThreshold Integer32,
|
|
rc2kIoCardTemperatureFAZoneShutdownThreshold Integer32
|
|
}
|
|
|
|
rc2kIoCardTemperatureSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32(3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot number of the IO card"
|
|
::= { rc2kIoCardTemperatureEntry 1 }
|
|
|
|
rc2kIoCardTemperatureFPGASensor1Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FPGA Sensor 1, located on the
|
|
Zagros on the first slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 2 }
|
|
|
|
rc2kIoCardTemperatureFPGASensor2Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FPGA Sensor 2, located on the
|
|
Zagros on the first slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 3 }
|
|
|
|
rc2kIoCardTemperatureFPGASensor3Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FPGA Sensor 3, located on the
|
|
RSP on the first slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 4 }
|
|
|
|
rc2kIoCardTemperatureFPGASensor4Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FPGA Sensor 4, located on the
|
|
Zagros on the second slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 5 }
|
|
|
|
rc2kIoCardTemperatureFPGASensor5Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FPGA Sensor 5, located on the
|
|
Zagros on the second slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 6 }
|
|
|
|
rc2kIoCardTemperatureFPGASensor6Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FPGA Sensor 6, located on the
|
|
RSP on the second slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 7 }
|
|
|
|
rc2kIoCardTemperatureFPGASensor7Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FPGA Sensor 7, located on the
|
|
Zagros on the third slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 8 }
|
|
|
|
rc2kIoCardTemperatureFPGASensor8Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FPGA Sensor 8, located on the
|
|
Zagros on the third slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 9 }
|
|
|
|
rc2kIoCardTemperatureFPGASensor9Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FPGA Sensor 9, located on the
|
|
RSP on the third slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 10 }
|
|
|
|
rc2kIoCardTemperatureFPGAZoneHighTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Highest temperature of all the FPGA sensors located
|
|
on this IO card, measured in celsius degrees."
|
|
::= { rc2kIoCardTemperatureEntry 11 }
|
|
|
|
rc2kIoCardTemperatureFPGAZoneLowTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Lowest temperature of all the FPGA sensors located
|
|
on this IO card, measured in celsius degrees."
|
|
::= { rc2kIoCardTemperatureEntry 12 }
|
|
|
|
rc2kIoCardTemperatureFPGAZoneAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When the FPGA temperature crosses this threshold
|
|
on this IO card, an alarm will be set."
|
|
::= { rc2kIoCardTemperatureEntry 13 }
|
|
|
|
rc2kIoCardTemperatureFPGAZoneShutdownThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When the FPGA temperature crosses this threshold
|
|
on this IO card, the card will be shutdown."
|
|
::= { rc2kIoCardTemperatureEntry 14 }
|
|
|
|
rc2kIoCardTemperatureFASensor1Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FA Sensor 1, located on the
|
|
first slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 15 }
|
|
|
|
rc2kIoCardTemperatureFASensor2Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FA Sensor 2, located on the
|
|
second slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 16 }
|
|
|
|
rc2kIoCardTemperatureFASensor3Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature of the FA Sensor 3, located on the
|
|
third slice, measured in celsius degrees.
|
|
A value of 0 for this mib object indicates that this
|
|
sensor is not available on this slot."
|
|
::= { rc2kIoCardTemperatureEntry 17 }
|
|
|
|
rc2kIoCardTemperatureFAZoneHighTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Highest temperature of all the FA sensors located
|
|
on this IO card, measured in celsius degrees."
|
|
::= { rc2kIoCardTemperatureEntry 18 }
|
|
|
|
rc2kIoCardTemperatureFAZoneLowTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Lowest temperature of all the FA sensors located
|
|
on this IO card, measured in celsius degrees."
|
|
::= { rc2kIoCardTemperatureEntry 19 }
|
|
|
|
rc2kIoCardTemperatureFAZoneAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When the FA temperature crosses this threshold
|
|
on this IO card, an alarm will be set."
|
|
::= { rc2kIoCardTemperatureEntry 20 }
|
|
|
|
rc2kIoCardTemperatureFAZoneShutdownThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When the FA temperature crosses this threshold
|
|
on this IO card, the card will be shutdown."
|
|
::= { rc2kIoCardTemperatureEntry 21 }
|
|
|
|
-- rc2kBootConfigHostTable
|
|
|
|
rc2kBootConfigHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rc2kBootConfigHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for the bootconfig host info on the device"
|
|
::= { rc2k 22 }
|
|
|
|
rc2kBootConfigHostEntry OBJECT-TYPE
|
|
SYNTAX Rc2kBootConfigHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing boot config host information."
|
|
INDEX { rc2kBootConfigHostSlot }
|
|
::= { rc2kBootConfigHostTable 1 }
|
|
|
|
Rc2kBootConfigHostEntry ::=
|
|
SEQUENCE {
|
|
rc2kBootConfigHostSlot Integer32,
|
|
rc2kBootConfigHostTftpHash TruthValue,
|
|
rc2kBootConfigHostTftpRetransmit Integer32,
|
|
rc2kBootConfigHostTftpTimeout Integer32,
|
|
rc2kBootConfigHostUser DisplayString,
|
|
rc2kBootConfigHostPassword DisplayString
|
|
}
|
|
|
|
rc2kBootConfigHostSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "slot number, VSP uses 1,2"
|
|
::= { rc2kBootConfigHostEntry 1 }
|
|
|
|
rc2kBootConfigHostTftpHash OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables tftp hashing"
|
|
DEFVAL { false }
|
|
::= { rc2kBootConfigHostEntry 2 }
|
|
|
|
rc2kBootConfigHostTftpRetransmit OBJECT-TYPE
|
|
SYNTAX Integer32(1..120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set tftp retransmit timeout counter"
|
|
DEFVAL { 2 }
|
|
::= { rc2kBootConfigHostEntry 3 }
|
|
|
|
rc2kBootConfigHostTftpTimeout OBJECT-TYPE
|
|
SYNTAX Integer32(1..120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set tftp timeout counter"
|
|
DEFVAL { 6 }
|
|
::= { rc2kBootConfigHostEntry 4 }
|
|
|
|
rc2kBootConfigHostUser OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configure host user"
|
|
::= { rc2kBootConfigHostEntry 5 }
|
|
|
|
rc2kBootConfigHostPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configure host password"
|
|
::= { rc2kBootConfigHostEntry 6 }
|
|
|
|
|
|
-- rcVossSystem
|
|
-- Virtual Services Platform Operating System Software
|
|
|
|
rcVossSystemMib OBJECT IDENTIFIER ::= { rcVossSystem 1 }
|
|
rcVossSystemObjects OBJECT IDENTIFIER ::= { rcVossSystemMib 1 }
|
|
rcVossSystemScalars OBJECT IDENTIFIER ::= { rcVossSystemObjects 1 }
|
|
|
|
rcVossSystemTemperatureTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVossSystemTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for retrieving the temperatures
|
|
of each temperature sensor for Single CP
|
|
system"
|
|
::= { rcVossSystemObjects 2}
|
|
|
|
rcVossSystemTemperatureEntry OBJECT-TYPE
|
|
SYNTAX RcVossSystemTemperatureEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding the temperature of
|
|
each sensor on the device."
|
|
INDEX { rcVossSystemTemperatureSensorIndex }
|
|
::= { rcVossSystemTemperatureTable 1 }
|
|
|
|
RcVossSystemTemperatureEntry ::=
|
|
SEQUENCE {
|
|
rcVossSystemTemperatureSensorIndex Integer32,
|
|
rcVossSystemTemperatureSensorDescription DisplayString,
|
|
rcVossSystemTemperatureTemperature Gauge32,
|
|
rcVossSystemTemperatureWarningThreshold Integer32,
|
|
rcVossSystemTemperatureCriticalThreshold Integer32,
|
|
rcVossSystemTemperatureStatus INTEGER
|
|
}
|
|
rcVossSystemTemperatureSensorIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Temperature Sensor Index. The range depends on the
|
|
number of sensors on the device.
|
|
For CN3240 device, there are 4 temperature sensors"
|
|
::= { rcVossSystemTemperatureEntry 1 }
|
|
|
|
rcVossSystemTemperatureSensorDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to describle the name of the sensor"
|
|
::= { rcVossSystemTemperatureEntry 2 }
|
|
|
|
rcVossSystemTemperatureTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sensor temperature measured in celsius degree"
|
|
::= { rcVossSystemTemperatureEntry 3 }
|
|
|
|
rcVossSystemTemperatureWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature value of Warning threshold of this sensor.
|
|
When the temperature crosses this threshold, a warning
|
|
message will be generated"
|
|
::= { rcVossSystemTemperatureEntry 4 }
|
|
|
|
rcVossSystemTemperatureCriticalThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Temperature value of Critical threshold of this sensor.
|
|
When the temperature crosses this threshold, whether
|
|
the system is being shutdown or a critical message is
|
|
generated depends on the hardware capability"
|
|
::= { rcVossSystemTemperatureEntry 5 }
|
|
|
|
rcVossSystemTemperatureStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highCritial(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the current temperature status based on the.
|
|
Warning and critical Threshold"
|
|
::= { rcVossSystemTemperatureEntry 6 }
|
|
|
|
-- Fan Tray
|
|
|
|
rcVossSystemFanTrayInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVossSystemFanTrayInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for the fan tray module info on the device"
|
|
::= { rcVossSystemObjects 3 }
|
|
|
|
rcVossSystemFanTrayInfoEntry OBJECT-TYPE
|
|
SYNTAX RcVossSystemFanTrayInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding a fan tray unit"
|
|
INDEX { rcVossSystemFanTrayInfoTrayId }
|
|
::= { rcVossSystemFanTrayInfoTable 1 }
|
|
|
|
RcVossSystemFanTrayInfoEntry ::=
|
|
SEQUENCE {
|
|
rcVossSystemFanTrayInfoTrayId Integer32,
|
|
rcVossSystemFanTrayInfoDescription DisplayString,
|
|
rcVossSystemFanTrayInfoSerialNumber DisplayString,
|
|
rcVossSystemFanTrayInfoPartNumber DisplayString,
|
|
rcVossSystemFanTrayInfoFlowType INTEGER
|
|
}
|
|
|
|
rcVossSystemFanTrayInfoTrayId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Fan tray ID.
|
|
3 trays on the device DSG8032,
|
|
3 trays on the device DSG9032
|
|
4 trays on the device DSG8064"
|
|
::= { rcVossSystemFanTrayInfoEntry 1 }
|
|
|
|
rcVossSystemFanTrayInfoDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Description of the fan tray"
|
|
::= { rcVossSystemFanTrayInfoEntry 2 }
|
|
|
|
rcVossSystemFanTrayInfoSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The fan tray serial number."
|
|
::= { rcVossSystemFanTrayInfoEntry 3 }
|
|
|
|
rcVossSystemFanTrayInfoPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The fan tray part number."
|
|
::= { rcVossSystemFanTrayInfoEntry 4 }
|
|
|
|
rcVossSystemFanTrayInfoFlowType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
frontToBack(2),
|
|
backToFront(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Direction of the Fan Flow:
|
|
- unknown(1) - Flow can not be determined.
|
|
- fronttoback(2) - Front to back flow.
|
|
- backtofront(3) - Back to front flow."
|
|
::= { rcVossSystemFanTrayInfoEntry 5 }
|
|
|
|
-- VOSS system Fan
|
|
|
|
rcVossSystemFanInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVossSystemFanInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for the fan info on each fan tray on
|
|
device this "
|
|
::= { rcVossSystemObjects 4 }
|
|
|
|
rcVossSystemFanInfoEntry OBJECT-TYPE
|
|
SYNTAX RcVossSystemFanInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding a fan tray unit"
|
|
INDEX { rcVossSystemFanInfoTrayId, rcVossSystemFanInfoFanId }
|
|
::= { rcVossSystemFanInfoTable 1 }
|
|
|
|
RcVossSystemFanInfoEntry ::=
|
|
SEQUENCE {
|
|
rcVossSystemFanInfoTrayId Integer32,
|
|
rcVossSystemFanInfoFanId Integer32,
|
|
rcVossSystemFanInfoDescription DisplayString,
|
|
rcVossSystemFanInfoOperStatus INTEGER,
|
|
rcVossSystemFanInfoOperSpeed INTEGER
|
|
}
|
|
rcVossSystemFanInfoTrayId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "FanInfo tray ID.
|
|
3 trays on the device CN3240"
|
|
::= { rcVossSystemFanInfoEntry 1 }
|
|
|
|
rcVossSystemFanInfoFanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "FanInfo unit ID on a fan tray.
|
|
Each FanInfo tray has 2 fans on the device CN3240"
|
|
::= { rcVossSystemFanInfoEntry 2 }
|
|
|
|
rcVossSystemFanInfoDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Description of the fan tray"
|
|
::= { rcVossSystemFanInfoEntry 3 }
|
|
|
|
rcVossSystemFanInfoOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
up(2),
|
|
down(3),
|
|
notpresent(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Actual status of the FanInfo:
|
|
- unknown(1) - status can not be determined.
|
|
- up(2) - present and supplying power.
|
|
- down(3) - present, but failure indicated."
|
|
::= { rcVossSystemFanInfoEntry 4 }
|
|
|
|
rcVossSystemFanInfoOperSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
medium(2),
|
|
high(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the cuurent operational speed of the fan"
|
|
::= { rcVossSystemFanInfoEntry 5 }
|
|
|
|
-- rcVossUsbTable
|
|
|
|
rcVossUsbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVossUsbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table for the USB module info on the device"
|
|
::= { rcVossSystemObjects 7 }
|
|
|
|
rcVossUsbEntry OBJECT-TYPE
|
|
SYNTAX RcVossUsbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains information regarding a USB module"
|
|
INDEX { rcVossUsbTrayId }
|
|
::= { rcVossUsbTable 1 }
|
|
|
|
RcVossUsbEntry ::=
|
|
SEQUENCE {
|
|
rcVossUsbTrayId Integer32,
|
|
rcVossUsbStatus INTEGER,
|
|
rcVossUsbDescription DisplayString
|
|
}
|
|
|
|
rcVossUsbTrayId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Index of USB"
|
|
::= { rcVossUsbEntry 1 }
|
|
rcVossUsbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
present(1),
|
|
notPresent(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The present status of the USB storage"
|
|
::= { rcVossUsbEntry 2 }
|
|
|
|
rcVossUsbDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Description of USB"
|
|
::= { rcVossUsbEntry 3 }
|
|
|
|
|
|
|
|
|
|
-- rcCLiCustom
|
|
rcCliSystemMib OBJECT IDENTIFIER ::= { rcCliSystem 1 }
|
|
rcCliSystemObjects OBJECT IDENTIFIER ::= { rcCliSystemMib 1 }
|
|
rcCliCustom OBJECT IDENTIFIER ::= { rcCliSystemObjects 1 }
|
|
|
|
rcCliCustomBannerText OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..1896))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CLI customer banner. if object rcCliCustomBannerEnable
|
|
is not true, the customer banner will not be shown on
|
|
CLI session"
|
|
::= { rcCliCustom 1 }
|
|
|
|
rcCliCustomBannerEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates wthether the customer banner rcCliCustomBannerText is
|
|
shown on the CLI session"
|
|
::= { rcCliCustom 2 }
|
|
|
|
rcSmtpMib OBJECT IDENTIFIER ::= { rcSmtp 1 }
|
|
rcSmtpObjects OBJECT IDENTIFIER ::= { rcSmtpMib 1 }
|
|
rcSmtpGlobal OBJECT IDENTIFIER ::= { rcSmtpObjects 1 }
|
|
|
|
rcSmtpGlobalServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The address type of Server (rcSmtpGlobalServerAddress)"
|
|
::= { rcSmtpGlobal 1 }
|
|
|
|
rcSmtpGlobalServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SMTP server address. It is associated with rcSmtpGlobalServerAddressType "
|
|
::= { rcSmtpGlobal 2 }
|
|
|
|
rcSmtpGlobalReceiverEmailsList OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..1274))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A list of email addresses which separated by comma.
|
|
Maximum length of each email address cannot exceeds 254
|
|
characters. 1274 can support up 5 email addresses and include
|
|
seperators"
|
|
::= { rcSmtpGlobal 3 }
|
|
|
|
rcSmtpGlobalNumOfEmails OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of email address in object rcSmtpGlobalReceiverEmails"
|
|
::= { rcSmtpGlobal 4 }
|
|
|
|
rcSmtpGlobalSenderEmail OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..254))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Sender email addresses which is used as from field to
|
|
send to the receiver email (rcSmtpGlobalReceiverEmailsList)"
|
|
::= { rcSmtpGlobal 5 }
|
|
|
|
rcSmtpGlobalPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The TCP port of the Email server in object rcSmtpGlobalServerAddress.
|
|
The default SMTP port is 25"
|
|
DEFVAL { 25 }
|
|
::= { rcSmtpGlobal 6 }
|
|
|
|
rcSmtpGlobalSystemStatusSendTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 30..43200)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The system informatin email period, in seconds.
|
|
This timer is for emailing system information. It is not for
|
|
sending the logging event information.
|
|
0 means not to send the system infomration"
|
|
DEFVAL { 0 }
|
|
::= { rcSmtpGlobal 7 }
|
|
|
|
rcSmtpGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Adminstratively Enable/disable this SMTP protocol"
|
|
::= { rcSmtpGlobal 8 }
|
|
|
|
rcSmtpGlobalLogEventIds OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..2200))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A list of active event IDs whicd are currently sending by emial. It
|
|
includes the default event IDs also (rcSmtpGlobalDefaultLogEventIds).
|
|
This object can be used to added a new event ID of and removed a
|
|
event IDs that is no longer need to be send.
|
|
|
|
The Event Ids is in the hex format (such as 0x12345678) and separated by
|
|
comma (0x001234,0x123456ab). Each event Ids is up to 10 digits with
|
|
the prefix 0x or 8 digits without prefix. Plus a comma as a separator.
|
|
2200 can hold up to 200 Event IDs"
|
|
::= { rcSmtpGlobal 9 }
|
|
|
|
rcSmtpGlobalNumOfEventIds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of event ID in object rcSmtpGlobalLogEventIds"
|
|
::= { rcSmtpGlobal 10 }
|
|
|
|
rcSmtpGlobalDefaultLogEventIds OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..2200))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a default list of event IDs which the email will send by
|
|
default. They will be added to Logging list (rcSmtpGlobalLogEventIds)
|
|
when device boot up. If a event ID from this list i sno longer need to
|
|
be send, it can be de-registed from the active logging list by using
|
|
removing from object rcSmtpGlobalLogEventIds.
|
|
|
|
The Event Ids is in the hex format (such as 0x12345678) and separated
|
|
by comma. Each event Ids is up to 10 digits. Plus a comma as a separator.
|
|
2200 can hold up to 200 Event IDs"
|
|
::= { rcSmtpGlobal 11 }
|
|
|
|
rcSmtpGlobalNumOfDefaultEventIds OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of event ID in the default list object
|
|
rcSmtpGlobalDefaultLogEventIds"
|
|
::= { rcSmtpGlobal 12 }
|
|
|
|
rcSmtpGlobalDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..254))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "smtp domain name"
|
|
::= { rcSmtpGlobal 13 }
|
|
|
|
-- 10Gb Ethernet MIB table begin
|
|
|
|
rcTengEnetStats OBJECT IDENTIFIER ::= { rcTengEnet 1 }
|
|
|
|
-- Wis Sonet traps --
|
|
|
|
rcWisTrap OBJECT IDENTIFIER ::= { rcTengEnet 2 }
|
|
|
|
rcWisSonetTrapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sectionAlarm(1),
|
|
lineAlarm(2),
|
|
pathAlarm(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate a particular type of 10GE Sonet
|
|
trap."
|
|
::= { rcWisTrap 1 }
|
|
|
|
rcWisSonetTrapIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noDefect(1),
|
|
sectionLossOfSignal(2),
|
|
sectionLossOfFrame(3),
|
|
lineAlarmIndication(4),
|
|
lineRemoteDefectIndication(5),
|
|
pathLossOfPointer(6),
|
|
pathAlarmIndication(7),
|
|
pathRemoteDefectIndication(8),
|
|
pathUnequipped(9),
|
|
pathSignalLabelMismatch(10),
|
|
pathTraceMismatch(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate an indication for a 10GE Sonet trap."
|
|
::= { rcWisTrap 2 }
|
|
|
|
-- the 10Gb Ethernet-like Statistics group
|
|
|
|
rcTengDot3StatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcTengDot3StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Statistics for a collection of ethernet-like
|
|
interfaces attached to a particular system."
|
|
::= { rcTengEnetStats 1 }
|
|
|
|
rcTengDot3StatsEntry OBJECT-TYPE
|
|
SYNTAX RcTengDot3StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Statistics for a particular interface to an
|
|
ethernet-like medium."
|
|
INDEX { rcTengDot3StatsIndex }
|
|
::= { rcTengDot3StatsTable 1 }
|
|
|
|
RcTengDot3StatsEntry ::=
|
|
SEQUENCE {
|
|
rcTengDot3StatsIndex Integer32,
|
|
rcTengDot3StatsAlignmentErrors Counter64,
|
|
rcTengDot3StatsFCSErrors Counter64,
|
|
rcTengDot3StatsSingleCollisionFrames Counter64,
|
|
rcTengDot3StatsMultipleCollisionFrames Counter64,
|
|
rcTengDot3StatsSQETestErrors Counter64,
|
|
rcTengDot3StatsDeferredTransmissions Counter64,
|
|
rcTengDot3StatsLateCollisions Counter64,
|
|
rcTengDot3StatsExcessiveCollisions Counter64,
|
|
rcTengDot3StatsInternalMacTransmitErrors Counter64,
|
|
rcTengDot3StatsCarrierSenseErrors Counter64,
|
|
rcTengDot3StatsFrameTooLongs Counter64,
|
|
rcTengDot3StatsInternalMacReceiveErrors Counter64,
|
|
rcTengDot3StatsEtherChipSet OBJECT IDENTIFIER,
|
|
-- copy & combine from rcStatGigTable
|
|
rcTengDot3StatsLinkFailures Counter32,
|
|
rcTengDot3StatsPacketErrors Counter32,
|
|
rcTengDot3StatsCarrierErrors Counter32,
|
|
rcTengDot3StatsLinkInactiveErrors Counter32,
|
|
rcTengDot3StatsInFlowCtrlPkts Counter64,
|
|
rcTengDot3StatsOutFlowCtrlPkts Counter64,
|
|
-- copy & cobmine this atrribute from rcTengStatEntry
|
|
rcTengDot3StatsFrameTooShorts Counter64,
|
|
rcTengDot3StatsFramesBad Counter64,
|
|
rcTengDot3StatsFragmentErrors Counter64,
|
|
rcTengDot3StatsLongJabberErrors Counter64,
|
|
rcTengDot3StatsDefaultDrops Counter64,
|
|
rcTengDot3StatsIllegalLenError Counter64,
|
|
rcTengDot3StatsMismatchError Counter64,
|
|
rcTengDot3StatsOutOfRangeError Counter64,
|
|
rcTengDot3StatsOversize Counter64,
|
|
rcTengDot3StatsDataErrors Counter64,
|
|
rcTengDot3StatsJabberErrors Counter64,
|
|
-- from rcStatGigTable
|
|
rcTengDot3StatsInPfcPkts Counter64,
|
|
rcTengDot3StatsOutPfcPkts Counter64
|
|
}
|
|
|
|
rcTengDot3StatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies an
|
|
interface to an ethernet-like medium. The
|
|
interface identified by a particular value of
|
|
this index is the same interface as identified
|
|
by the same value of ifIndex."
|
|
::= { rcTengDot3StatsEntry 1 }
|
|
|
|
rcTengDot3StatsAlignmentErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames received on a particular
|
|
interface that are not an integral number of
|
|
octets in length and do not pass the FCS check.
|
|
The count represented by an instance of this
|
|
object is incremented when the alignmentError
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 2 }
|
|
|
|
rcTengDot3StatsFCSErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames received on a particular
|
|
interface that are an integral number of octets
|
|
in length but do not pass the FCS check.
|
|
The count represented by an instance of this
|
|
object is incremented when the frameCheckError
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 3 }
|
|
|
|
rcTengDot3StatsSingleCollisionFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of successfully transmitted frames on
|
|
a particular interface for which transmission
|
|
is inhibited by exactly one collision.
|
|
A frame that is counted by an instance of this
|
|
object is also counted by the corresponding
|
|
instance of either the ifOutUcastPkts,
|
|
ifOutMulticastPkts, or ifOutBroadcastPkts,
|
|
and is not counted by the corresponding
|
|
instance of the dot3StatsMultipleCollisionFrames
|
|
object."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 4 }
|
|
|
|
rcTengDot3StatsMultipleCollisionFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of successfully transmitted frames on
|
|
a particular interface for which transmission
|
|
is inhibited by more than one collision.
|
|
A frame that is counted by an instance of this
|
|
object is also counted by the corresponding
|
|
instance of either the ifOutUcastPkts,
|
|
ifOutMulticastPkts, or ifOutBroadcastPkts,
|
|
and is not counted by the corresponding
|
|
instance of the dot3StatsSingleCollisionFrames
|
|
object."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 5 }
|
|
|
|
rcTengDot3StatsSQETestErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of times that the SQE TEST ERROR
|
|
message is generated by the PLS sublayer for a
|
|
particular interface. The SQE TEST ERROR
|
|
message is defined in section 7.2.2.2.4 of
|
|
ANSI/IEEE 802.3-1985 and its generation is
|
|
described in section 7.2.4.6 of the same
|
|
document."
|
|
REFERENCE "ANSI/IEEE Std 802.3-1985 Carrier Sense
|
|
Multiple Access with Collision Detection Access
|
|
Method and Physical Layer Specifications"
|
|
::= { rcTengDot3StatsEntry 6 }
|
|
|
|
rcTengDot3StatsDeferredTransmissions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which the first
|
|
transmission attempt on a particular interface
|
|
is delayed because the medium is busy.
|
|
The count represented by an instance of this
|
|
object does not include frames involved in
|
|
collisions."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 7 }
|
|
|
|
rcTengDot3StatsLateCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times that a collision is
|
|
detected on a particular interface later than
|
|
512 bit-times into the transmission of a
|
|
packet.
|
|
Five hundred and twelve bit-times corresponds
|
|
to 51.2 microseconds on a 10 Mbit/s system. A
|
|
(late) collision included in a count
|
|
represented by an instance of this object is
|
|
also considered as a (generic) collision for
|
|
purposes of other collision-related
|
|
statistics."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 8 }
|
|
|
|
rcTengDot3StatsExcessiveCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which transmission on a
|
|
particular interface fails due to excessive
|
|
collisions."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 9 }
|
|
|
|
rcTengDot3StatsInternalMacTransmitErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which transmission on a
|
|
particular interface fails due to an internal
|
|
MAC sublayer transmit error. A frame is only
|
|
counted by an instance of this object if it is
|
|
not counted by the corresponding instance of
|
|
either the rcTengDot3StatsLateCollisions object, the
|
|
rcTengDot3StatsExcessiveCollisions object, or the
|
|
rcTengDot3StatsCarrierSenseErrors object.
|
|
|
|
The precise meaning of the count represented by
|
|
an instance of this object is implementation-
|
|
specific. In particular, an instance of this
|
|
object may represent a count of transmission
|
|
errors on a particular interface that are not
|
|
otherwise counted."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 10 }
|
|
|
|
rcTengDot3StatsCarrierSenseErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times that the carrier sense
|
|
condition was lost or never asserted when
|
|
attempting to transmit a frame on a particular
|
|
interface.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented at most once per
|
|
transmission attempt, even if the carrier sense
|
|
condition fluctuates during a transmission
|
|
attempt."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 11 }
|
|
|
|
-- { rcTengDot3StatsEntry 12 } is not assigned
|
|
|
|
rcTengDot3StatsFrameTooLongs OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames received on a particular
|
|
interface that exceed the maximum permitted
|
|
frame size.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the frameTooLong
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 13 }
|
|
|
|
-- { rcTengDot3StatsEntry 14 } is not assigned
|
|
|
|
-- { rcTengDot3StatsEntry 15 } is not assigned
|
|
|
|
rcTengDot3StatsInternalMacReceiveErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which reception on a
|
|
particular interface fails due to an internal
|
|
MAC sublayer receive error. A frame is only
|
|
counted by an instance of this object if it is
|
|
not counted by the corresponding instance of
|
|
either the rcTengDot3StatsFrameTooLongs object, the
|
|
rcTengDot3StatsAlignmentErrors object, or the
|
|
rcTengDot3StatsFCSErrors object.
|
|
|
|
The precise meaning of the count represented by
|
|
an instance of this object is implementation-
|
|
specific. In particular, an instance of this
|
|
object may represent a count of receive errors
|
|
on a particular interface that are not
|
|
otherwise counted."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { rcTengDot3StatsEntry 16 }
|
|
|
|
rcTengDot3StatsEtherChipSet OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object contains an OBJECT IDENTIFIER
|
|
which identifies the chipset used to
|
|
realize the interface. Ethernet-like
|
|
interfaces are typically built out of
|
|
several different chips. The MIB implementor
|
|
is presented with a decision of which chip
|
|
to identify via this object. The implementor
|
|
should identify the chip which is usually
|
|
called the Medium Access Control chip.
|
|
If no such chip is easily identifiable,
|
|
the implementor should identify the chip
|
|
which actually gathers the transmit
|
|
and receive statistics and error
|
|
indications. This would allow a
|
|
manager station to correlate the
|
|
statistics and the chip generating
|
|
them, giving it the ability to take
|
|
into account any known anomalies
|
|
in the chip."
|
|
::= { rcTengDot3StatsEntry 17 }
|
|
|
|
rcTengDot3StatsLinkFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of link failures enCounter32ed on
|
|
this interface."
|
|
::= { rcTengDot3StatsEntry 18 }
|
|
|
|
rcTengDot3StatsPacketErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packet errors enCounter32ed on
|
|
this interface."
|
|
::= { rcTengDot3StatsEntry 19 }
|
|
|
|
rcTengDot3StatsCarrierErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of carrier errors enCounter32ed on
|
|
this interface."
|
|
::= { rcTengDot3StatsEntry 20 }
|
|
|
|
rcTengDot3StatsLinkInactiveErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of link inactive errors enCounter32ed
|
|
on this interface."
|
|
::= {rcTengDot3StatsEntry 21 }
|
|
|
|
rcTengDot3StatsInFlowCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of flow control packets received
|
|
by this interface."
|
|
::= { rcTengDot3StatsEntry 22 }
|
|
|
|
rcTengDot3StatsOutFlowCtrlPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of flow control packets transmitted
|
|
by this interface."
|
|
::= { rcTengDot3StatsEntry 23 }
|
|
|
|
rcTengDot3StatsFrameTooShorts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames that are too short
|
|
that were enCounter32ed on this interface."
|
|
::= { rcTengDot3StatsEntry 24 }
|
|
|
|
rcTengDot3StatsInPfcPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of Priority Flow Control (PFC)
|
|
packets received by this interface."
|
|
::= { rcTengDot3StatsEntry 26 }
|
|
|
|
rcTengDot3StatsOutPfcPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of Priority Flow Control (PFC)
|
|
packets transmitted by this interface."
|
|
::= { rcTengDot3StatsEntry 27 }
|
|
|
|
rcTengDot3StatsFramesBad OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bad frames"
|
|
::= { rcTengDot3StatsEntry 28 }
|
|
|
|
rcTengDot3StatsFragmentErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of fragment errors"
|
|
::= { rcTengDot3StatsEntry 29 }
|
|
|
|
rcTengDot3StatsLongJabberErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of long jabber errors"
|
|
::= { rcTengDot3StatsEntry 30 }
|
|
|
|
rcTengDot3StatsDefaultDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of default drops"
|
|
::= { rcTengDot3StatsEntry 31 }
|
|
|
|
rcTengDot3StatsIllegalLenError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of illegal length error"
|
|
::= { rcTengDot3StatsEntry 32 }
|
|
|
|
rcTengDot3StatsMismatchError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of mismatch error"
|
|
::= { rcTengDot3StatsEntry 33 }
|
|
|
|
rcTengDot3StatsOutOfRangeError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of out of range error"
|
|
::= { rcTengDot3StatsEntry 34 }
|
|
|
|
rcTengDot3StatsOversize OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of oversize "
|
|
::= { rcTengDot3StatsEntry 35 }
|
|
|
|
rcTengDot3StatsDataErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of data errors"
|
|
::= { rcTengDot3StatsEntry 36 }
|
|
|
|
rcTengDot3StatsJabberErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of jabbber errors"
|
|
::= { rcTengDot3StatsEntry 37 }
|
|
|
|
-- 10Gb ethernet Stat Tbale
|
|
|
|
rcTengStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcTengStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store port statistics."
|
|
::= { rcTengEnetStats 2 }
|
|
|
|
rcTengStatEntry OBJECT-TYPE
|
|
SYNTAX RcTengStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "interface Counter32s"
|
|
INDEX { rcTengStatIndex }
|
|
::= { rcTengStatTable 1 }
|
|
|
|
RcTengStatEntry ::= SEQUENCE {
|
|
rcTengStatIndex Integer32,
|
|
rcTengStatBridgeInUnicastFrames Counter32,
|
|
rcTengStatBridgeInMulticastFrames Counter32,
|
|
rcTengStatBridgeInBroadcastFrames Counter32,
|
|
rcTengStatBridgeInDiscards Counter32,
|
|
rcTengStatBridgeOutUnicastFrames Counter32,
|
|
rcTengStatBridgeOutMulticastFrames Counter32,
|
|
rcTengStatBridgeOutBroadcastFrames Counter32,
|
|
rcTengStatRouteInUnicastFrames Counter32,
|
|
rcTengStatRouteInMulticastFrames Counter32,
|
|
rcTengStatRouteInDiscards Counter32,
|
|
rcTengStatRouteOutUnicastFrames Counter32,
|
|
rcTengStatRouteOutMulticastFrames Counter32,
|
|
rcTengStatStgForwardTransitions Counter32,
|
|
rcTengStatStgInConfigBpdus Counter32,
|
|
rcTengStatStgInTcnBpdus Counter32,
|
|
rcTengStatStgInBadBpdus Counter32,
|
|
rcTengStatStgOutConfigBpdus Counter32,
|
|
rcTengStatStgOutTcnBpdus Counter32,
|
|
rcTengStatBridgeOutFrames Counter32
|
|
}
|
|
|
|
rcTengStatIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { rcTengStatEntry 1 }
|
|
|
|
rcTengStatBridgeInUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming unicast frames that
|
|
were bridged."
|
|
::= { rcTengStatEntry 2 }
|
|
|
|
rcTengStatBridgeInMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming multicast frames that
|
|
were bridged."
|
|
::= { rcTengStatEntry 3 }
|
|
|
|
rcTengStatBridgeInBroadcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming broadcast frames that
|
|
were bridged."
|
|
::= { rcTengStatEntry 4 }
|
|
|
|
rcTengStatBridgeInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames that were discarded by
|
|
the bridging entity."
|
|
::= { rcTengStatEntry 5 }
|
|
|
|
rcTengStatBridgeOutUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing unicast frames that
|
|
were bridged."
|
|
::= { rcTengStatEntry 6 }
|
|
|
|
rcTengStatBridgeOutMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing multicast frames that
|
|
were bridged."
|
|
::= { rcTengStatEntry 7 }
|
|
|
|
rcTengStatBridgeOutBroadcastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing broadcast frames that
|
|
were bridged."
|
|
::= { rcTengStatEntry 8 }
|
|
|
|
rcTengStatRouteInUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming unicast frames that
|
|
were routed."
|
|
::= { rcTengStatEntry 9 }
|
|
|
|
rcTengStatRouteInMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming multicast frames that
|
|
were routed."
|
|
::= { rcTengStatEntry 10 }
|
|
|
|
rcTengStatRouteInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames that were discarded by
|
|
the routing entity."
|
|
::= { rcTengStatEntry 11 }
|
|
|
|
rcTengStatRouteOutUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing unicast frames that
|
|
were routed."
|
|
::= { rcTengStatEntry 12 }
|
|
|
|
rcTengStatRouteOutMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing multicast frames that
|
|
were routed."
|
|
::= { rcTengStatEntry 13 }
|
|
|
|
rcTengStatStgForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { rcTengStatEntry 14 }
|
|
|
|
rcTengStatStgInConfigBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcTengStatEntry 15 }
|
|
|
|
rcTengStatStgInTcnBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcTengStatEntry 16 }
|
|
|
|
rcTengStatStgInBadBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcTengStatEntry 17 }
|
|
|
|
rcTengStatStgOutConfigBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcTengStatEntry 18 }
|
|
|
|
rcTengStatStgOutTcnBpdus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcTengStatEntry 19 }
|
|
|
|
rcTengStatBridgeOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used by the Accelar 8000 product family to account
|
|
for all transmitted bridge unicast, broadcast, and
|
|
multicast packets. The individual Counter32s are not
|
|
supported."
|
|
|
|
::= { rcTengStatEntry 20 }
|
|
|
|
-- From rfc1573rcc.mib
|
|
-- the Interfaces table
|
|
-- The Interfaces table contains information on the entity's
|
|
-- interfaces. Each sub-layer below the internetwork-layer
|
|
-- of a network interface is considered to be an interface.
|
|
|
|
rcTengIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcTengIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of interface entries. The number of entries
|
|
is given by the value of engIfNumber."
|
|
::= { rcTengEnetStats 3 }
|
|
|
|
rcTengIfEntry OBJECT-TYPE
|
|
SYNTAX RcTengIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing management information applicable
|
|
to a particular interface."
|
|
INDEX { rcTengIfIndex }
|
|
::= { rcTengIfTable 1 }
|
|
|
|
RcTengIfEntry ::= SEQUENCE {
|
|
rcTengIfIndex InterfaceIndex,
|
|
rcTengIfDescr DisplayString,
|
|
rcTengIfType INTEGER,
|
|
rcTengIfMtu Integer32,
|
|
rcTengIfSpeed Gauge32,
|
|
rcTengIfPhysAddress PhysAddress,
|
|
rcTengIfAdminStatus INTEGER,
|
|
rcTengIfOperStatus INTEGER,
|
|
rcTengIfLastChange TimeTicks,
|
|
rcTengIfInOctets Counter64,
|
|
rcTengIfInUcastPkts Counter64,
|
|
rcTengIfInNUcastPkts Counter64, -- obsolete
|
|
rcTengIfInDiscards Counter64,
|
|
rcTengIfInErrors Counter64,
|
|
rcTengIfInUnknownProtos Counter64,
|
|
rcTengIfOutOctets Counter64,
|
|
rcTengIfOutUcastPkts Counter64,
|
|
rcTengIfOutNUcastPkts Counter64, -- obsolete
|
|
rcTengIfOutDiscards Counter64,
|
|
rcTengIfOutErrors Counter64,
|
|
rcTengIfOutQLen Gauge32, -- obsolete
|
|
rcTengIfSpecific OBJECT IDENTIFIER -- obsolete
|
|
}
|
|
|
|
rcTengIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A unique value, greater than zero, for each
|
|
interface. It is recommended that values are assigned
|
|
contiguously starting from 1. The value for each
|
|
interface sub-layer must remain constant at least from
|
|
one re-initialization of the entity's network
|
|
management system to the next re-initialization."
|
|
::= { rcTengIfEntry 1 }
|
|
|
|
rcTengIfDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A textual string containing information about the
|
|
interface. This string should include the name of the
|
|
manufacturer, the product name and the version of the
|
|
interface hardware/software."
|
|
::= { rcTengIfEntry 2 }
|
|
|
|
rcTengIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
regular1822(2),
|
|
hdh1822(3),
|
|
ddnX25(4),
|
|
rfc877x25(5),
|
|
ethernetCsmacd(6),
|
|
iso88023Csmacd(7),
|
|
iso88024TokenBus(8),
|
|
iso88025TokenRing(9),
|
|
iso88026Man(10),
|
|
starLan(11),
|
|
proteon10Mbit(12),
|
|
proteon80Mbit(13),
|
|
hyperchannel(14),
|
|
fddi(15),
|
|
lapb(16),
|
|
sdlc(17),
|
|
ds1(18), -- DS1/E1 (RFC 1406)
|
|
e1(19), -- obsolete
|
|
basicISDN(20),
|
|
primaryISDN(21),
|
|
propPointToPointSerial(22), -- proprietary serial
|
|
ppp(23),
|
|
softwareLoopback(24),
|
|
eon(25), -- CLNP over IP (RFC 1070)
|
|
ethernet3Mbit(26),
|
|
nsip(27), -- XNS over IP
|
|
slip(28), -- generic SLIP
|
|
ultra(29), -- ULTRA technologies
|
|
ds3(30), -- T-3
|
|
sip(31), -- SMDS
|
|
frameRelay(32), -- DTE only
|
|
rs232(33),
|
|
para(34), -- parallel-port
|
|
arcnet(35), -- arcnet
|
|
arcnetPlus(36), -- arcnet plus
|
|
atm(37), -- ATM cells
|
|
miox25(38),
|
|
sonet(39), -- SONET or SDH
|
|
x25ple(40),
|
|
iso88022llc(41),
|
|
localTalk(42),
|
|
smdsDxi(43),
|
|
frameRelayService(44), -- Frame relay DCE
|
|
v35(45),
|
|
hssi(46),
|
|
hippi(47),
|
|
modem(48), -- Generic modem
|
|
aal5(49), -- AAL5 over ATM
|
|
sonetPath(50),
|
|
sonetVT(51),
|
|
smdsIcip(52), -- SMDS InterCarrier Interface
|
|
propVirtual(53), -- proprietary virtual/internal
|
|
propMultiplexor(54) -- proprietary multiplexing
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The type of interface. Additional values for IfType
|
|
are assigned by the Internet Assigned Numbers
|
|
Authority (IANA), through updating the syntax of the
|
|
IANAifType textual convention."
|
|
::= { rcTengIfEntry 3 }
|
|
|
|
rcTengIfMtu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The size of the largest packet which can be
|
|
sent/received on the interface, specified in octets.
|
|
For interfaces that are used for transmitting network
|
|
datagrams, this is the size of the largest network
|
|
datagram that can be sent on the interface."
|
|
::= { rcTengIfEntry 4 }
|
|
|
|
rcTengIfSpeed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An estimate of the interface's current bandwidth in
|
|
bits per second. For interfaces which do not vary in
|
|
bandwidth or for those where no accurate estimation
|
|
can be made, this object should contain the nominal
|
|
bandwidth. If the bandwidth of the interface is
|
|
greater than the maximum value reportable by this
|
|
object then this object should report its maximum
|
|
value (4,294,967,295) and ifHighSpeed must be used to
|
|
report the interace's speed. For a sub-layer which
|
|
has no concept of bandwidth, this object should be
|
|
zero."
|
|
::= { rcTengIfEntry 5 }
|
|
|
|
rcTengIfPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interface's address at its protocol sub-layer.
|
|
The interface's media-specific MIB must define the bit
|
|
and byte ordering and format of the value contained by
|
|
this object. For interfaces which do not have such an
|
|
address (e.g., a serial line), this object should
|
|
contain an octet string of zero length."
|
|
::= { rcTengIfEntry 6 }
|
|
|
|
rcTengIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The desired state of the interface. The testing(3)
|
|
state indicates that no operational packets can be
|
|
passed. When a managed system initializes, all
|
|
interfaces start with IfAdminStatus in the down(2)
|
|
state. As a result of either explicit management
|
|
action or per configuration information retained by
|
|
the managed system, IfAdminStatus is then changed to
|
|
either the up(1) or testing(3) states (or remains in
|
|
the down(2) state)."
|
|
::= { rcTengIfEntry 7 }
|
|
|
|
rcTengIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2),
|
|
testing(3), -- in some test mode
|
|
unknown(4), -- status can not be determined
|
|
-- for some reason.
|
|
dormant(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational state of the interface. The
|
|
testing(3) state indicates that no operational packets
|
|
can be passed. If IfAdminStatus is down(2) then
|
|
IfOperStatus should be down(2). If IfAdminStatus is
|
|
changed to up(1) then ifOperStatus should change to
|
|
up(1) if the interface is ready to transmit and
|
|
receive network traffic; it should change to
|
|
dormant(5) if the interface is waiting for external
|
|
actions (such as a serial line waiting for an
|
|
incomming connection); it should remain in the down(2)
|
|
state if and only if there is a fault that prevents if
|
|
from going to the up(1) state."
|
|
::= { rcTengIfEntry 8 }
|
|
|
|
rcTengIfLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of sysUpTime at the time the interface
|
|
entered its current operational state. If the current
|
|
state was entered prior to the last re-initialization
|
|
of the local network management subsystem, then this
|
|
object contains a zero value."
|
|
::= { rcTengIfEntry 9 }
|
|
|
|
rcTengIfInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets received on the interface,
|
|
including framing characters."
|
|
::= { rcTengIfEntry 10 }
|
|
|
|
rcTengIfInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets, delivered by this sub-layer to
|
|
a higher (sub-)layer, which were not addressed to a
|
|
multicast or broadcast address at this sub-layer."
|
|
::= { rcTengIfEntry 11 }
|
|
|
|
rcTengIfInNUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The number of packets, delivered by this sub-layer to
|
|
a higher (sub-)layer, which were addressed to a
|
|
multicast or broadcast address at this sub-layer.
|
|
This object is deprecated in favour of
|
|
IfInMulticastPkts and IfInBroadcastPkts."
|
|
::= { rcTengIfEntry 12 }
|
|
|
|
rcTengIfInDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of inbound packets which were chosen to be
|
|
discarded even though no errors had been detected to
|
|
prevent their being deliverable to a higher-layer
|
|
protocol. One possible reason for discarding such a
|
|
packet could be to free up buffer space."
|
|
::= { rcTengIfEntry 13 }
|
|
|
|
rcTengIfInErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "For packet-oriented interfaces, the number of inbound
|
|
packets that contained errors preventing them from
|
|
being deliverable to a higher-layer protocol. For
|
|
character-oriented or fixed-length interfaces, the
|
|
number of inbound transmission units that contained
|
|
errors preventing them from being deliverable to a
|
|
higher-layer protocol."
|
|
::= { rcTengIfEntry 14 }
|
|
|
|
rcTengIfInUnknownProtos OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "For packet-oriented interfaces, the number of packets
|
|
received via the interface which were discarded
|
|
because of an unknown or unsupported protocol. For
|
|
character-oriented or fixed-length interfaces which
|
|
support protocol multiplexing the number of
|
|
transmission units received via the interface which
|
|
were discarded because of an unknown or unsupported
|
|
protocol. For any interface which does not support
|
|
protocol multiplexing, this counter will always be 0."
|
|
::= { rcTengIfEntry 15 }
|
|
|
|
rcTengIfOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets transmitted out of the
|
|
interface, including framing characters."
|
|
::= { rcTengIfEntry 16 }
|
|
|
|
rcTengIfOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets that higher-level
|
|
protocols requested be transmitted, and which were not
|
|
addressed to a multicast or broadcast address at this
|
|
sub-layer, including those that were discarded or not
|
|
sent."
|
|
::= { rcTengIfEntry 17 }
|
|
|
|
rcTengIfOutNUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The total number of packets that higher-level
|
|
protocols requested be transmitted, and which were
|
|
addressed to a multicast or broadcast address at this
|
|
sub-layer, including those that were discarded or not
|
|
sent.
|
|
|
|
This object is deprecated in favour of
|
|
IfOutMulticastPkts and IfOutBroadcastPkts."
|
|
::= { rcTengIfEntry 18 }
|
|
|
|
rcTengIfOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of outbound packets which were chosen to
|
|
be discarded even though no errors had been detected
|
|
to prevent their being transmitted. One possible
|
|
reason for discarding such a packet could be to free
|
|
up buffer space."
|
|
::= { rcTengIfEntry 19 }
|
|
|
|
rcTengIfOutErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "For packet-oriented interfaces, the number of
|
|
outbound packets that could not be transmitted because
|
|
of errors. For character-oriented or fixed-length
|
|
interfaces, the number of outbound transmission units
|
|
that could not be transmitted because of errors."
|
|
::= { rcTengIfEntry 20 }
|
|
|
|
rcTengIfOutQLen OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The length of the output packet queue (in packets)."
|
|
::= { rcTengIfEntry 21 }
|
|
|
|
rcTengIfSpecific OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "A reference to MIB definitions specific to the
|
|
particular media being used to realize the interface.
|
|
It is recommended that this value point to an instance
|
|
of a MIB object in the media-specific MIB, i.e., that
|
|
this object have the semantics associated with the
|
|
InstancePointer textual convention defined in RFC
|
|
1443. In fact, it is recommended that the media-
|
|
specific MIB specify what value ifSpecific should/can
|
|
take for values of ifType. If no MIB definitions
|
|
specific to the particular media are available, the
|
|
value should be set to the OBJECT IDENTIFIER { 0 0 }."
|
|
::= { rcTengIfEntry 22 }
|
|
|
|
|
|
--
|
|
-- Extension to the interface table
|
|
--
|
|
-- This table replaces the ifExtnsTable table.
|
|
--
|
|
|
|
rcTengIfXTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcTengIfXEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of interface entries. The number of entries
|
|
is given by the value of ifNumber. This table
|
|
contains additional objects for the interface table."
|
|
::= { rcTengEnetStats 4 }
|
|
|
|
rcTengIfXEntry OBJECT-TYPE
|
|
SYNTAX RcTengIfXEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing additional management information
|
|
applicable to a particular interface."
|
|
INDEX { rcTengIfXIndex }
|
|
::= { rcTengIfXTable 1 }
|
|
|
|
RcTengIfXEntry ::= SEQUENCE {
|
|
rcTengIfXIndex InterfaceIndex,
|
|
rcTengIfName DisplayString,
|
|
rcTengIfInMulticastPkts Counter64,
|
|
rcTengIfInBroadcastPkts Counter64,
|
|
rcTengIfOutMulticastPkts Counter64,
|
|
rcTengIfOutBroadcastPkts Counter64,
|
|
rcTengIfHCInOctets Counter64,
|
|
rcTengIfHCInUcastPkts Counter64,
|
|
rcTengIfHCInMulticastPkts Counter64,
|
|
rcTengIfHCInBroadcastPkts Counter64,
|
|
rcTengIfHCOutOctets Counter64,
|
|
rcTengIfHCOutUcastPkts Counter64,
|
|
rcTengIfHCOutMulticastPkts Counter64,
|
|
rcTengIfHCOutBroadcastPkts Counter64,
|
|
rcTengIfLinkUpDownTrapEnable INTEGER,
|
|
rcTengIfHighSpeed Gauge32,
|
|
rcTengIfPromiscuousMode TruthValue,
|
|
rcTengIfConnectorPresent TruthValue
|
|
}
|
|
|
|
rcTengIfXIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A unique value, greater than zero, for each
|
|
interface. It is recommended that values are assigned
|
|
contiguously starting from 1. The value for each
|
|
interface sub-layer must remain constant at least from
|
|
one re-initialization of the entity's network
|
|
management system to the next re-initialization."
|
|
::= { rcTengIfXEntry 1 }
|
|
|
|
rcTengIfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The textual name of the interface. The value of this
|
|
object should be the name of the interface as assigned
|
|
by the local device and should be suitable for use in
|
|
commands entered at the device's `console'. This
|
|
might be a text name, such as `le0' or a simple port
|
|
number, such as `1', depending on the interface naming
|
|
syntax of the device. If several entries in the
|
|
rcTengIfTable together represent a single interface as
|
|
named by the device, then each will have the same
|
|
value of rcTengIfName. If there is no local name, or
|
|
this object is otherwise not applicable, then this
|
|
object contains a 0-length string."
|
|
::= { rcTengIfXEntry 2 }
|
|
|
|
rcTengIfInMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets, delivered by this sub-layer to
|
|
a higher (sub-)layer, which were addressed to a
|
|
multicast address at this sub-layer. For a MAC layer
|
|
protocol, this includes both Group and Functional
|
|
addresses."
|
|
::= { rcTengIfXEntry 3 }
|
|
|
|
rcTengIfInBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets, delivered by this sub-layer to
|
|
a higher (sub-)layer, which were addressed to a
|
|
broadcast address at this sub-layer."
|
|
::= { rcTengIfXEntry 4 }
|
|
|
|
rcTengIfOutMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets that higher-level
|
|
protocols requested be transmitted, and which were
|
|
addressed to a multicast address at this sub-layer,
|
|
including those that were discarded or not sent. For
|
|
a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { rcTengIfXEntry 5 }
|
|
|
|
rcTengIfOutBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets that higher-level
|
|
protocols requested be transmitted, and which were
|
|
addressed to a broadcast address at this sub-layer,
|
|
including those that were discarded or not sent."
|
|
::= { rcTengIfXEntry 6 }
|
|
|
|
rcTengIfHCInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets received on the interface,
|
|
including framing characters. This object is a 64-bit
|
|
version of rcTengIfInOctets."
|
|
::= { rcTengIfXEntry 7 }
|
|
|
|
rcTengIfHCInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets, delivered by this sub-layer to
|
|
a higher (sub-)layer, which were not addressed to a
|
|
multicast or broadcast address at this sub-layer.
|
|
This object is a 64-bit version of rcTengIfInUcastPkts."
|
|
::= { rcTengIfXEntry 8 }
|
|
|
|
rcTengIfHCInMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets, delivered by this sub-layer to
|
|
a higher (sub-)layer, which were addressed to a
|
|
multicast address at this sub-layer. For a MAC layer
|
|
protocol, this includes both Group and Functional
|
|
addresses. This object is a 64-bit version of
|
|
rcTengIfInMulticastPkts."
|
|
::= { rcTengIfXEntry 9 }
|
|
|
|
rcTengIfHCInBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of packets, delivered by this sub-layer to
|
|
a higher (sub-)layer, which were addressed to a
|
|
broadcast address at this sub-layer. This object is a
|
|
64-bit version of IfInBroadcastPkts."
|
|
::= { rcTengIfXEntry 10 }
|
|
|
|
rcTengIfHCOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of octets transmitted out of the
|
|
interface, including framing characters. This object
|
|
is a 64-bit version of rcTengIfOutOctets."
|
|
::= { rcTengIfXEntry 11 }
|
|
|
|
rcTengIfHCOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets that higher-level
|
|
protocols requested be transmitted, and which were not
|
|
addressed to a multicast or broadcast address at this
|
|
sub-layer, including those that were discarded or not
|
|
sent. This object is a 64-bit version of
|
|
rcTengIfOutUcastPkts."
|
|
::= { rcTengIfXEntry 12 }
|
|
|
|
rcTengIfHCOutMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets that higher-level
|
|
protocols requested be transmitted, and which were
|
|
addressed to a multicast address at this sub-layer,
|
|
including those that were discarded or not sent. For
|
|
a MAC layer protocol, this includes both Group and
|
|
Functional addresses. This object is a 64-bit version
|
|
of rcTengIfOutMulticastPkts."
|
|
::= { rcTengIfXEntry 13 }
|
|
|
|
rcTengIfHCOutBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets that higher-level
|
|
protocols requested be transmitted, and which were
|
|
addressed to a broadcast address at this sub-layer,
|
|
including those that were discarded or not sent. This
|
|
object is a 64-bit version of rcTengIfOutBroadcastPkts."
|
|
::= { rcTengIfXEntry 14 }
|
|
|
|
rcTengIfLinkUpDownTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether linkUp/linkDown traps should be
|
|
generated for this interface.
|
|
By default, this object should have the value
|
|
enabled(1) for interfaces which do not operate on
|
|
'top' of any other interface (as defined in the
|
|
rcTengIfStackTable), and disabled(2) otherwise."
|
|
::= { rcTengIfXEntry 15 }
|
|
|
|
rcTengIfHighSpeed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An estimate of the interface's current bandwidth in
|
|
units of 1,000,000 bits per second. If this object
|
|
reports a value of `n' then the speed of the interface
|
|
is somewhere in the range of `n-500,000' to
|
|
`n+499,999'. For interfaces which do not vary in
|
|
bandwidth or for those where no accurate estimation
|
|
can be made, this object should contain the nominal
|
|
bandwidth. For a sub-layer which has no concept of
|
|
bandwidth, this object should be zero."
|
|
::= { rcTengIfXEntry 16 }
|
|
|
|
rcTengIfPromiscuousMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object has a value of false(2) If this interface
|
|
only accepts packets/frames that are addressed to this
|
|
station. This object has a value of true(1) when the
|
|
station accepts all packets/frames transmitted on the
|
|
media. The value true(1) is only legal on certain
|
|
types of media. If legal, setting this object to a
|
|
value of true(1) may require the interface to be reset
|
|
before becoming effective.
|
|
|
|
The value of rcTengIfPromiscuousMode does not affect the
|
|
reception of broadcast and multicast packets/frames by
|
|
the interface."
|
|
::= { rcTengIfXEntry 17 }
|
|
|
|
rcTengIfConnectorPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object has the value 'true(1)' if the interface
|
|
sublayer has a physical connector and the value
|
|
'false(2)' otherwise."
|
|
::= { rcTengIfXEntry 18 }
|
|
|
|
-- RecRecord
|
|
|
|
rcRecReservTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcRecReservEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table would display the statistics of several HW
|
|
record type used. This will also let the user reserve
|
|
certain number of records for each type."
|
|
::= { rcRec 1 }
|
|
|
|
rcRecReservTablEntry OBJECT-TYPE
|
|
SYNTAX RcRecReservEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcRecReservRecordType }
|
|
::= { rcRecReservTable 1 }
|
|
|
|
RcRecReservEntry ::=
|
|
SEQUENCE {
|
|
rcRecReservRecordType INTEGER,
|
|
rcRecReservUsed Integer32,
|
|
rcRecReservReserved Integer32,
|
|
rcRecReservNewReserved Integer32,
|
|
rcRecReservDefReserved Integer32
|
|
}
|
|
|
|
rcRecReservRecordType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filter(1),
|
|
ipmc(2),
|
|
local(3),
|
|
mac(4),
|
|
static(5),
|
|
vrrp(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { rcRecReservTablEntry 1 }
|
|
|
|
rcRecReservUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displayes the number of HW records actually usee
|
|
by the recordType."
|
|
::= { rcRecReservTablEntry 2 }
|
|
|
|
rcRecReservReserved OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displayes the number of HW records reserved for
|
|
the recordType."
|
|
::= { rcRecReservTablEntry 3 }
|
|
|
|
rcRecReservNewReserved OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Displayes the number of HW records that w ill
|
|
be reserved for this recordType after reset if the
|
|
configuration is saved."
|
|
::= { rcRecReservTablEntry 4 }
|
|
|
|
rcRecReservDefReserved OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of records reserved for this recordType
|
|
if loaded with factory default."
|
|
::= { rcRecReservTablEntry 5 }
|
|
|
|
-- SSH Group
|
|
-- SSH Global Information. All requires RWA access.
|
|
|
|
rcSshGlobal OBJECT IDENTIFIER ::= { rcSsh 1 }
|
|
|
|
rcSshGlobalVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v2only(1),
|
|
both(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SSH version"
|
|
DEFVAL { v2only }
|
|
::= { rcSshGlobal 1 }
|
|
|
|
rcSshGlobalPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..49151)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SSH connection port."
|
|
DEFVAL { 22 }
|
|
::= { rcSshGlobal 2 }
|
|
|
|
rcSshGlobalMaxSession OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of session allowed."
|
|
DEFVAL { 4 }
|
|
::= { rcSshGlobal 3 }
|
|
|
|
rcSshGlobalTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SSH connection timeout in seconds."
|
|
DEFVAL { 60 }
|
|
::= { rcSshGlobal 4 }
|
|
|
|
rcSshGlobalRsaKeySize OBJECT-TYPE
|
|
SYNTAX INTEGER (512..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SSH Rsa key size."
|
|
DEFVAL { 1024 }
|
|
::= { rcSshGlobal 5 }
|
|
|
|
rcSshGlobalDsaKeySize OBJECT-TYPE
|
|
SYNTAX INTEGER (1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SSH Dsa key size."
|
|
DEFVAL { 1024 }
|
|
::= { rcSshGlobal 6 }
|
|
|
|
rcSshGlobalRsaAuth OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable SSH RSA authentication"
|
|
DEFVAL { true }
|
|
::= { rcSshGlobal 7 }
|
|
|
|
rcSshGlobalDsaAuth OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable SSH DSA authentication"
|
|
DEFVAL { true }
|
|
::= { rcSshGlobal 8 }
|
|
|
|
rcSshGlobalPassAuth OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable SSH RSA authentication"
|
|
DEFVAL { true }
|
|
::= { rcSshGlobal 9 }
|
|
|
|
rcSshGlobalKeyAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
generateDsa(1),
|
|
generateRsa(2),
|
|
deleteDsa(3),
|
|
deleteRsa(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SSH key action."
|
|
::= { rcSshGlobal 10 }
|
|
|
|
rcSshGlobalEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1),
|
|
secure(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable, or securely enable SSH. Securely enable
|
|
turns off other daemon flag, and it takes ffect afte reboot"
|
|
DEFVAL { false }
|
|
::= { rcSshGlobal 11 }
|
|
|
|
rcSshGlobalHostIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "current remote ip addr"
|
|
::= { rcSshGlobal 12 }
|
|
|
|
rcSshGlobalRetries OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Number of SSH retries allowed."
|
|
DEFVAL { 3 }
|
|
::= { rcSshGlobal 13 }
|
|
|
|
rcSshGlobalDsaAuthKeyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the DSA Auth Key. When not used, the value is a zero
|
|
length string."
|
|
::= { rcSshGlobal 14 }
|
|
|
|
rcSshGlobalRsaAuthKeyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the RSA Auth Key. When not used, the value is a zero
|
|
length string."
|
|
::= { rcSshGlobal 15 }
|
|
|
|
rcSshGlobalRekeyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable SSH Rekey. This needs global SSH flag to be
|
|
enabled"
|
|
DEFVAL { false }
|
|
::= { rcSshGlobal 16 }
|
|
|
|
rcSshGlobalRekeyTimeInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..6)
|
|
UNITS "hours"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval in hours after which active SSH sessions
|
|
should start the rekey process."
|
|
DEFVAL { 1 }
|
|
::= { rcSshGlobal 17 }
|
|
|
|
rcSshGlobalRekeyDataLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (1..6)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Total data(in GB) Tx and Rx in active SSH sessions
|
|
after which sessions should start the rekey process."
|
|
DEFVAL { 1 }
|
|
::= { rcSshGlobal 18 }
|
|
|
|
rcSshGlobalSftpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable SSH Sftp."
|
|
DEFVAL { true }
|
|
::= { rcSshGlobal 19 }
|
|
|
|
rcSshGlobalKeyboardInteractiveAuth OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable SSH keyboard-interactive mode authentication"
|
|
DEFVAL { false }
|
|
::= { rcSshGlobal 20 }
|
|
rcSshAuthType OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
hmacSha1(0),
|
|
aeadAes128GcmSsh(1),
|
|
aeadAes256GcmSsh(2),
|
|
hmacSha2256(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "value is one of multiple (logically by 'OR' of
|
|
following value:
|
|
bit 0 - hmac_sha1
|
|
bit 1 - aead_aes_128_gcm_ssh
|
|
bit 2 - aead_aes_256_gcm_ssh
|
|
bit 3 - hmac_sha2_256
|
|
hmac_sha1 : Enables hmac-sha1 auth type
|
|
aead_aes_128_gcm_ssh : Enables aead-aes-128-gcm-ssh auth
|
|
type
|
|
aead_aes_256_gcm_ssh : Enables aead-aes-256-gcm-ssh auth
|
|
type
|
|
hmac_sha2_256 : Enables hmac-sha2-256 auth type"
|
|
::= { rcSshGlobal 21 }
|
|
|
|
rcSshEncryptionType OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
aes128Cbc(0),
|
|
aes256Cbc(1),
|
|
threeDesCbc(2),
|
|
aeadAes128GcmSsh(3),
|
|
aeadAes256GcmSsh(4),
|
|
aes128Ctr(5),
|
|
rijndael128Cbc(6),
|
|
aes256Ctr(7),
|
|
aes192Ctr(8),
|
|
aes192Cbc(9),
|
|
rijndael192Cbc(10),
|
|
blowfishCbc(11)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "value is one of multiple (logically by 'OR' of
|
|
following value:
|
|
bit 0 - aes128_cbc
|
|
bit 1 - aes256_cbc
|
|
bit 2 - threedes_cbc
|
|
bit 3 - aead_aes_128_gcm_ssh
|
|
bit 4 - aead_aes_256_gcm_ssh
|
|
bit 5 - aes128_ctr
|
|
bit 6 - rijndael128_cbc
|
|
bit 7 - aes256_ctr
|
|
bit 8 - aes192_ctr
|
|
bit 9 - aes192_cbc
|
|
bit 10 - rijndael192_cbc
|
|
bit 11 - blowfish_cbc
|
|
aes128_cbc : Enables hmac-sha1 encryption type
|
|
aes256_cbc : Enables aes256-cbc encrytption
|
|
type
|
|
threedes_cbc : Enables 3des-cbc type encryption
|
|
type
|
|
aead_aes_128_gcm_ssh : Enables aead-aes-128-gcm-ssh
|
|
encryption type
|
|
aead_aes_256_gcm_ssh : Enables aead-aes-256-gcm-ssh
|
|
encryption type
|
|
aes128_ctr : Enables aes128-ctr encryption type
|
|
rijndael128_cbc : Enables rijndael128-cbc
|
|
encryption type
|
|
aes256_ctr : Enables aes256-ctr encryption type
|
|
type
|
|
aes192_ctr : Enables aes198-ctr encryption
|
|
type
|
|
aes192_cbc : Enables aes192-cbc encryption type
|
|
rijndael192_cbc : Enables rijndael192-cbc
|
|
encryption type
|
|
blowfish_cbc : Enables blowfish-cbc encryption type"
|
|
::= { rcSshGlobal 22 }
|
|
|
|
rcSshKeyExchangeMethod OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
diffieHellmanGroup14Sha1(0),
|
|
diffieHellmanGroup1Sha1(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "value is one of multiple (logically by 'OR'
|
|
of following value:
|
|
bit 0 - diffie_hellman_group14_sha1
|
|
bit 1 - diffie_hellman_group1_sha1
|
|
diffie_hellman_group14_sha1 : Enables
|
|
diffie-hellman-group14_sha1 method
|
|
diffie_hellman_group1_sha1 : Enables
|
|
diffie_hellman_group1_sha1 method"
|
|
::= { rcSshGlobal 23 }
|
|
|
|
|
|
rcSshGlobalClientEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable SSH Client."
|
|
DEFVAL { true }
|
|
::= { rcSshGlobal 24 }
|
|
|
|
-- License scheme
|
|
|
|
rcLicenseNumber OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bit8600BASE(0),
|
|
-- Thunderbolt definitions no longer exist. This entry (1) is free now
|
|
-- bitthunderboltBASE(1),
|
|
bitPP8300BASE(2),
|
|
bitdellBASE(3),
|
|
bit8xx4BASE(4),
|
|
bit8xx5BASE(5),
|
|
bit8xx6BASE(6),
|
|
bit8xx7BASE(7),
|
|
bit8xx8BASE(8),
|
|
bit8xx9BASE(9),
|
|
bit8x10BASE(10),
|
|
bit8x11BASE(11),
|
|
bit8x12BASE(12),
|
|
bit8x13BASE(13),
|
|
bit8x14BASE(14),
|
|
bit8x15BASE(15),
|
|
bit8x16BASE(16),
|
|
bit8x17BASE(17),
|
|
bit8x18BASE(18),
|
|
bit8x19BASE(19),
|
|
bit8x20BASE(20),
|
|
bit8x21BASE(21),
|
|
bit8x22BASE(22),
|
|
bit8x23BASE(23),
|
|
bit8x24BASE(24),
|
|
bit8x25BASE(25),
|
|
bit8x26BASE(26),
|
|
bit8x27BASE(27),
|
|
bit8x28BASE(28),
|
|
bit8x29BASE(29),
|
|
bit8x30BASE(30),
|
|
bit8x31BASE(31),
|
|
-- /* Reserve 32 bits for base */
|
|
|
|
-- /* Start package license */
|
|
bitpackageStart(32),
|
|
|
|
bitBASIC(33),
|
|
bitUNICAST(34),
|
|
bitMULTICAST(35),
|
|
bitTOOL(36),
|
|
bitADVANCED(37),
|
|
bitPREMIER(39),
|
|
bitMACSEC(40),
|
|
|
|
bitpackageEnd(255),
|
|
-- /* End package license */
|
|
|
|
-- /* Feature bit start from bit 256 */
|
|
-- /* These bits are from xxxConsistencyCheck */
|
|
bitfeature(256),
|
|
bitrc2kCopyFileGrp(257),
|
|
bitrc2kDeviceGlobalTbl(258),
|
|
bitrcCliCustomGrp(259),
|
|
bitrcCliGrp(260),
|
|
bitrcCliGrpWsm(261),
|
|
bitrcDiagMacConvSteeringTbl(262),
|
|
bitrcDiagMirrorByPortTbl(263),
|
|
bitrcDiagPortConvSteeringTbl(264),
|
|
bitrcSysAccPolicyTbl(265),
|
|
bitrcSysGrp(266),
|
|
bitrcSysTrapTbl(267),
|
|
bitrcUserSetTimeGrp(268),
|
|
bitrcPortLock(269),
|
|
bitrcSyslogGlobalGrp(270),
|
|
bitrcSyslogHostTbl(271),
|
|
bitrcWebGrp(272),
|
|
bitdot1dStaticEntry(273),
|
|
bitsnmpCommunityTbl(274),
|
|
bitrcLoadModule(275),
|
|
bitrcMltGrp(276),
|
|
bitrcMltTbl(277),
|
|
bitsmltMacTblSend(278),
|
|
bitrc2kQosEgressQosToDscpTbl(279),
|
|
bitrc2kQosEgressQosToTagTbl(280),
|
|
bitrc2kQosIngressDscpToQosTbl(281),
|
|
bitrc2kQosIngressTagToQosTbl(282),
|
|
bitrc2kQosQosTbl(283),
|
|
bitrcBridgeAutoLearnTbl(284),
|
|
bitrcBridgeManualEditTbl(285),
|
|
bitrcBridgeUnknownMacDiscardTbl(286),
|
|
bitrcBridgeStaticMulticastTbl(287),
|
|
bitrcSvlanGlobalGrp(288),
|
|
bitrcSvlanTbl(289),
|
|
bitrcVlanMacTbl(290),
|
|
bitrcVlanPortTbl(291),
|
|
bitrcVlanTbl(292),
|
|
bitvlanTbl(293),
|
|
bitrc2kBootConfigTbl(294),
|
|
bitrc2kCpuEthernetPortRouteTbl(295),
|
|
bitrc2kCpuEthernetPortTbl(296),
|
|
bitrc2kCpuSerialPortTbl(297),
|
|
bitrc2kCardTbl(298),
|
|
bitrc2kMdaCardTbl(299),
|
|
bitrcChassisGrp(300),
|
|
bitrcL2RedundancyGrp(301),
|
|
bitrcRecReservTbl(302),
|
|
bitrcTftpGrp(303),
|
|
bitrcFdbTbl(304),
|
|
bitrcFilterTbl(305),
|
|
bitrcStaticTbl(306),
|
|
bitmgMirror(307),
|
|
bitifTbl(308),
|
|
bitifTestTbl(309),
|
|
bitrcChassisPort(310),
|
|
bitrcRateLimitTbl(311),
|
|
bitrcTengIfTbl(312),
|
|
bitrcLinkFlapDetectGrp(313),
|
|
bitifTblMlt(314),
|
|
bitposIfTbl(315),
|
|
bitpppBridgeConfigTbl(316),
|
|
bitpppIpConfigTbl(317),
|
|
bitpppLinkConfigTbl(318),
|
|
bitpppLqrConfigTbl(319),
|
|
bitrcPosLineConfigTbl(320),
|
|
bitrcPosPppIpxTbl(321),
|
|
bitrcPosSioCardConfigTbl(322),
|
|
bitrcPosSonetTbl(323),
|
|
bitatm1483ElanTbl(324),
|
|
bitatmPortTbl(325),
|
|
bitatmPvcTbl(326),
|
|
bitrc2kAtm1483ElanTbl(327),
|
|
bitrc2kAtmPortTbl(328),
|
|
bitrc2kAtmPvcTbl(329),
|
|
bitrc2kAtmSioCardConfigTbl(330),
|
|
bitbrdgStp(331),
|
|
bitbrdgStpPortTbl(332),
|
|
bitrcStg(333),
|
|
bitrcStgPortTbl(334),
|
|
bitrcStgTbl(335),
|
|
bitigmpInterfaceTbl(336),
|
|
bitrcIgmpAccessTbl(337),
|
|
bitrcIgmpInterfaceExtnTbl(338),
|
|
bitrcIgmpSendersTbl(339),
|
|
bitrcIgmpStaticTbl(340),
|
|
bitipfFilterModifyDs(341),
|
|
bitrc2kQosTrafficProfileTbl(342),
|
|
bitrcIpFilterBaseListTbl(343),
|
|
bitrcIpFilterGlobalListTbl(344),
|
|
bitrcIpFilterMediaDevTbl(345),
|
|
bitrcIpFilterMediaStreamTbl(346),
|
|
bitrcIpFilterPortTbl(347),
|
|
bitrcIpFilterTbl(348),
|
|
bitrcIpMulticastSoftwareForwardingGrp(349),
|
|
bitrcIpMulticastTimedPruneTbl(350),
|
|
bitrcMltMcastDistributionGrp(351),
|
|
bitipMRouteInterfaceTbl(352),
|
|
bitdvmrpInterfaceTbl(353),
|
|
bitpimCandidateRPTbl(354),
|
|
bitpimGrp(355),
|
|
bitpimInterfaceTbl(356),
|
|
bitrcNtpGlobalGrp(357),
|
|
bitrcNtpKeyTbl(358),
|
|
bitrcNtpServerTbl(359),
|
|
bitospfAreaAggregateTbl(360),
|
|
bitospfAreaTbl(361),
|
|
bitospfGeneralGrp(362),
|
|
bitospfHostTbl(363),
|
|
bitospfIfMetricTbl(364),
|
|
bitospfIfTbl(365),
|
|
bitospfNbrTbl(366),
|
|
bitospfStubAreaTbl(367),
|
|
bitospfVirtIfTbl(368),
|
|
bitwfPgmGrp(369),
|
|
bitwfPgmIfTbl(370),
|
|
bitwfPgmSessionTbl(371),
|
|
bitrcRadiusGlobalGrp(372),
|
|
bitrcRadiusServerTbl(373),
|
|
bitrcIpFlowTbl(374),
|
|
bitrcIpConfDhcpTbl(375),
|
|
bitrcIpDhcpForwardTbl(376),
|
|
bitrcIpConfDvmrpTbl(377),
|
|
bitrcIpDvmrpGrp(378),
|
|
bitrcArpExtTbl(379),
|
|
bitrcIpAddrTbl(380),
|
|
bitrcIpConfGlobalGrp(381),
|
|
bitrcIpConfIcmpRdiscTbl(382),
|
|
bitrcIpConfTbl(383),
|
|
bitrcIpMulticastArpTbl(384),
|
|
bitrcIpRoutePrefTbl(385),
|
|
bitrcRipExtTbl(386),
|
|
bitrcIpConfOspfAreaAggregateTbl(387),
|
|
bitrcIpConfOspfAreaTbl(388),
|
|
bitrcIpConfOspfTbl(389),
|
|
bitrcIpPimGlobalGrp(390),
|
|
bitrcIpPimStaticRPTbl(391),
|
|
bitrcIpPimTbl(392),
|
|
bitrcIpRipInterfaceTbl(393),
|
|
bitrcIpRouteTbl(394),
|
|
bitrcIpStaticRouteTbl(395),
|
|
bittcpConnTbl(396),
|
|
bitrcIpUdpConfBroadcastIntfTbl(397),
|
|
bitrcIpUdpPortFwdListTbl(398),
|
|
bitrcIpUdpPortFwdTbl(399),
|
|
bitrcIpUdpProtocolTbl(400),
|
|
bitvrrpAssoIpAddrTbl(401),
|
|
bitvrrpOperTbl(402),
|
|
bitvrrpOperationsGrp(403),
|
|
bitvrrpRouterStatsTbl(404),
|
|
bitrcIpxAddrTbl(405),
|
|
bitrcIpxBrouterTbl(406),
|
|
bitrcIpxGrp(407),
|
|
bitrcIpxPolicyListTbl(408),
|
|
bitrcIpxPolicyNetTbl(409),
|
|
bitrcIpxPolicyServTbl(410),
|
|
bitrcIpxRipInFilterTbl(411),
|
|
bitrcIpxRipInterfaceTbl(412),
|
|
bitrcIpxRipOutFilterTbl(413),
|
|
bitrcIpxSapInFilterTbl(414),
|
|
bitrcIpxSapInterfaceTbl(415),
|
|
bitrcIpxSapOutFilterTbl(416),
|
|
bitvlanEncap(417),
|
|
bitrcIpAsPathAccessListTbl(418),
|
|
bitrcIpCommunityAccessListTbl(419),
|
|
bitrcIpGenPolicyGrp(420),
|
|
bitrcIpOspfInFilterTbl(421),
|
|
bitrcIpPrefixListTbl(422),
|
|
bitrcIpRedistributeTbl(423),
|
|
bitrcIpRoutePolicyStrEnt(424),
|
|
bitrcIpRoutePolicyTbl(425),
|
|
bits5EnMsTopInfoGrp(426),
|
|
bitbgpPeerTbl(427),
|
|
bitrcIpBgpAggregateTbl(428),
|
|
bitrcIpBgpConfederationGrp(429),
|
|
bitrcIpBgpGeneralGrp(430),
|
|
bitrcIpBgpNetworkTbl(431),
|
|
bitrcIpBgpPeerGroupTbl(432),
|
|
bitrcIpBgpPeerTbl(433),
|
|
bitrcIpBgpRouteReflectorGrp(434),
|
|
bitrcStatBgpGrp(435),
|
|
bitrcStatBgpPeerTbl(436),
|
|
bitrcSshGlobalGrp(437),
|
|
bitrcDiagPcapAdvancedFilterTbl(438),
|
|
bitrcDiagPcapFilterTbl(439),
|
|
bitrcDiagPcapGrp(440),
|
|
bitrcPortPcapTbl(441),
|
|
bitrcArpExtEntDoProxy(442),
|
|
bitrcIpConfGlobalRouteDiscovery(443),
|
|
bitSuperNetEnable(444),
|
|
bitospfCli(445),
|
|
|
|
-- start: import from Yiyu's CLI changes
|
|
bitTreeCli(446),
|
|
bitShowCmdCli(447),
|
|
bitInfoCmdCli(448),
|
|
bitrcIgmpChannelLimitTbl(449),
|
|
bitrcIgmpSsmTbl(450),
|
|
bitrcIgmpSsmGlobalGrp(451),
|
|
bitrcIgmpIgapGlobalGrp(452),
|
|
bitrcIgmpGlobalParamsGrp(453),
|
|
bitrcRadiusGlobalSnmpGrp(454),
|
|
bitrcSltPortTbl(455),
|
|
bitrcErrorGrp(456),
|
|
bitrcIgmpIgapServiceAbilityTbl(457),
|
|
bitrcVlanDsapSsapTbl(458),
|
|
bitrcIpArpCliClearPortCli(459),
|
|
bitrcIpArpCliClearVlanCli(460),
|
|
bitrcIpArpCliAddCli(461),
|
|
bitrcIpArpCliDeleteCli(462),
|
|
bitrcIpMulticastMacFloodingCliEnableCli(463),
|
|
bitcliMacFlapTimeLimitSetCli(464),
|
|
bitcliWriteRtcCli(465),
|
|
bitipfCliClearStatsCli(466),
|
|
bitipxCliDisableGnsCli(467),
|
|
bitipxCliDisableRipCli(468),
|
|
bitipxCliDisableRouteCli(469),
|
|
bitipxCliDisableSapCli(470),
|
|
bitipxCliRipSetDefDelayTimerCli(471),
|
|
bitipxCliRipSetHoldMultiplierCli(472),
|
|
bitipxCliRipSetDefIntervalTimerCli(473),
|
|
bitipxCliEnableGnsCli(474),
|
|
bitipxCliEnableRipCli(475),
|
|
bitipxCliEnableSapCli(476),
|
|
bitipxCliDisableRoute(477),
|
|
bitipxCliEnableRouteCli(478),
|
|
bitipxCliRipStateCli(479),
|
|
bitipxCliRipSetDelayTimerCli(480),
|
|
bitipxCliRipSetIntervalTimerCli(481),
|
|
bitipxCliSapAddStaticEntryCli(482),
|
|
bitipxCliSapDeleteStaticEntryCli(483),
|
|
bitipxCliSapSetDefDelayTimerCli(484),
|
|
bitipxCliSapSetDefHoldMultiplierCli(485),
|
|
bitipxCliSapSetDefIntervalTimerCli(486),
|
|
bitipxCliSapSetHoldMultiplierCli(487),
|
|
bitipxCliSapSetGnsTieBreakerCli(488),
|
|
bitipxCliSapStateCli(489),
|
|
bitipxCliSapSetDelayTimerCli(490),
|
|
bitipxCliSapSetIntervalTimerCli(491),
|
|
bitipxCliAddRouteEntryCli(492),
|
|
bitipxCliDeleteRouteEntryCli(493),
|
|
bitipxCliSetMaxRouteCli(494),
|
|
bitipxCliSetMaxSapCli(495),
|
|
bitipxCliSetMaxStaticRouteCli(496),
|
|
bitipxCliSetMaxStaticSapCli(497),
|
|
bitipxCliSetNetBiosEnableDisableCli(498),
|
|
bitipxCliSetLearnAfterIncrementEnableDisableCli(499),
|
|
bitcliPasswordROCli(500),
|
|
bitcliPasswordRWL1Cli(501),
|
|
bitcliPasswordRWL2Cli(502),
|
|
bitcliPasswordRWL3Cli(503),
|
|
bitcliPasswordRWCli(504),
|
|
bitcliPasswordRWACli(505),
|
|
bitcliPasswordSLBOPERCli(506),
|
|
bitcliPasswordL4OPERCli(507),
|
|
bitcliPasswordOPERCli(508),
|
|
bitcliPasswordSLBADMINCli(509),
|
|
bitcliPasswordL4ADMINCli(510),
|
|
bitcliPasswordSSLADMINCli(511),
|
|
bitcliMonitorDurationCli(512),
|
|
bitcliMonitorIntervalCli(513),
|
|
bitcliDefaultBannerCli(514),
|
|
bitcliDisplayMotdCli(515),
|
|
bitcliDefaultLoginCli(516),
|
|
bitcliDefaultPasswordCli(517),
|
|
bitcliMoreCli(518),
|
|
bitcliRloginLimitCli(519),
|
|
bitcliScrsizeCli(520),
|
|
bitcliTelnetLimitCli(521),
|
|
bitcliTimeoutCli(522),
|
|
bitlogCliHostCreateCli(523),
|
|
bitlogCliSetTransferFileNameCli(524),
|
|
bitlogCliHostDeleteCli(525),
|
|
bitlogcliLevelCli(526),
|
|
bitlogcliScreenCli(527),
|
|
bitlogCliMsgOnPcmciaCli(528),
|
|
bitcliAddTraceModuleCli(529),
|
|
bitsetAutoTraceStatusCli(530),
|
|
bitsetAutoTraceHighTrackDurationCli(531),
|
|
bitsetAutoTraceLowPercentageCli(532),
|
|
bitsetAutoTraceLowTrackDurationCli(533),
|
|
bitcliRemTraceModuleCli(534),
|
|
bitrcIpxCliPolicyTraceRipOutFilterAddCli(535),
|
|
bitrcIpxCliPolicyTraceRipOutFilterDeleteCli(536),
|
|
bitrcIpxCliPolicyTraceRipInFilterAddCli(537),
|
|
bitrcIpxCliPolicyTraceRipInFilterDeleteCli(538),
|
|
bitrcIpxCliPolicyTraceSapOutFilterAddCli(539),
|
|
bitrcIpxCliPolicyTraceSapOutFilterDelete(540),
|
|
bitrcIpxCliPolicyTraceSapInFilterAddCli(541),
|
|
bitrcIpxCliPolicyTraceSapInFilterDeleteCli(542),
|
|
bittracecliClearCli(543),
|
|
bittracecliLevelCli(544),
|
|
bittracecliOffCli(545),
|
|
bittracecliFilterCli(546),
|
|
bittracecliGrepStringCli(547),
|
|
bittraceCliPolicyCli(548),
|
|
bitdebugcliSlotXCli(549),
|
|
bitripCliSetDefImportMetCli(550),
|
|
bitripCliDisableCli(551),
|
|
bitripCliDomainCli(552),
|
|
bitripCliEnableCli(553),
|
|
bitripCliSetIfDomainCli(554),
|
|
bitripCliSetIfRxModeCli(555),
|
|
bitripCliSetIfTxModeCli(556),
|
|
bitripCliSetHoldDownCli(557),
|
|
bitripCliReceiveCli(558),
|
|
bitripCliSendCli(559),
|
|
bitsysCliSetRmonAlarmCreateCli(560),
|
|
bitsysCliSetRmonAlarmDeleteCli(561),
|
|
bitsysCliSetRmonEventCreateCli(562),
|
|
bitsysCliSetRmonEventDeleteCli(563),
|
|
bitsysCliSetRmonHistoryCreateCli(564),
|
|
bitsysCliSetRmonHistoryDeleteCli(565),
|
|
bitsysCliSetRmonEtherCreateCli(566),
|
|
bitsysCliSetRmonEtherDeleteCli(567),
|
|
bitsysCliSetRmonEtherOwnerCli(568),
|
|
bitcliStartAtmConsoleCli(569),
|
|
bitrebootcliCli(570),
|
|
bittoptreeCli(571),
|
|
bitconvert11configCli(572),
|
|
bitcopyimageCli(573),
|
|
bitcwccliCli(574),
|
|
bitshowdateCli(575),
|
|
bitdirectoryCli(576),
|
|
bitshowDumpAsicAddrCli(577),
|
|
bitshowHwDumpAllCli(578),
|
|
bitshowIcmpStatCli(579),
|
|
bitshowInetStatCli(580),
|
|
bitshowInspectCli(581),
|
|
bitcliinstallCli(582),
|
|
bitreloginCli(583),
|
|
bitshowopDumpErrorRegsCli(584),
|
|
bitshowOspfDumpAllCli(585),
|
|
bitshowOspfDumpSpfInfoCli(586),
|
|
bitpeercliCli(587),
|
|
bitpingcliCli(588),
|
|
bitipxCliPingCli(589),
|
|
bitpwccliCli(590),
|
|
bitshowrarDumpRegsCli(591),
|
|
bitshowRarCheckStatsCli(592),
|
|
bitshowRarErrorCountCli(593),
|
|
bitshowrcDumpIfIndexCli(594),
|
|
bitdeleteimageCli(595),
|
|
bitresetcliCli(596),
|
|
bitrlogincliCli(597),
|
|
bitrshcliCli(598),
|
|
bitsavecliCli(599),
|
|
bitVxshellCli(600),
|
|
bitclisourceCli(601),
|
|
bitshowSpyReportCli(602),
|
|
bitshowSwipDumpCli(603),
|
|
bittelnetcliCli(604),
|
|
bittracerouteCli(605),
|
|
bitshowTaskTraceCli(606),
|
|
bitrcIpRouteCliClearPortCli(607),
|
|
bitrcIpRouteCliClearVlanCli(608),
|
|
bitdumpcliArCli(609),
|
|
bitmltCliClearIstStatsCli(610),
|
|
bitportCliClearStatsCli(611),
|
|
bitcliResetConsoleShellCli(612),
|
|
bitcliKillTelnetSessionCli(613),
|
|
bitatmCliClearVPortStatsCli(614),
|
|
bitatmCliClearF5StatsCli(615),
|
|
bitatmCliClearPortStatsCli(616),
|
|
bitatmCliCardResetCli(617),
|
|
bitatmCliEnableVPortStatsCli(618),
|
|
bitatmCliSetDebugCli(619),
|
|
bitatmCliVPortStatsIntervalCli(620),
|
|
bitatmCliLaneCreateCli(621),
|
|
bitatmCliLaneDeleteCli(622),
|
|
bitatmCliStateCli(623),
|
|
bitigmpOldCliDelAccessListCli(624),
|
|
bitigmpOldCliSetAccessModeCli(625),
|
|
bitposCliCardResetCli(626),
|
|
bitposCliSetDebugCli(627),
|
|
bitposCliSetPosConsoleCli(628),
|
|
bitportCliSetLinktrapCli(629),
|
|
bitportCliFlushIgmpCli(630),
|
|
bitsysCliAccessEnableCli(631),
|
|
bitvlanCliIeeeDiscardRecordAgingCli(632),
|
|
bitvlanCliIeeeAgingDisableCli(633),
|
|
bitvlanCliIeeeAgingEnableCli(634),
|
|
bitsysCliSetSnmpForceTrapSenderCli(635),
|
|
bitsysResetWebPasswdCli(636),
|
|
bitsysResetSnmpCommStringsCli(637),
|
|
bitsysCliSetMgmtVirtualIpCli(638),
|
|
bitsysCliSetContactCli(639),
|
|
bitsysCliSetHighPerformanceCli(640),
|
|
bitsysCliSetLocationCli(641),
|
|
bitsysCliSetMessageControlCli(642),
|
|
bitsysCliSetChassisMTUCli(643),
|
|
bitcliPromptCli(644),
|
|
bitsysCliSetOctapidResetThresholdCli(645),
|
|
bitsysCliSetSmltPortUnlockTimeoutCli(646),
|
|
bitsysCliSetUdpSourceCli(647),
|
|
bitvlanCliFlushIeeeVlanDiscardRecordsCli(648),
|
|
bitposCliSetLEDCli(649),
|
|
bitvlanCliRipManualTrigCli(650),
|
|
bitvlanCliChangeIpxEncapCli(651),
|
|
bitvlanCliSetFdbTimeOutCli(652),
|
|
bitvlanCliSyncFdbCli(653),
|
|
bitportCliRipManualTrigCli(654),
|
|
bitportCliSetCpLimitCli(655),
|
|
bitportCliSetClockSourceCli(656),
|
|
bitportCliSetFlowControlCli(657),
|
|
bitportCliSetFlowControlPause0Cli(658),
|
|
bitportCliSetFlowControlPauseTimeCli(659),
|
|
bitportCliSetSffdCli(660),
|
|
bitsetMgmtIpCli(661),
|
|
bitsetWsmAutoResetCli(662),
|
|
bitreadWSMCommunityCli(663),
|
|
bitwriteWSMCommunityCli(664),
|
|
bittrapWSMCommunityCli(665),
|
|
bitauthTrapWSMCli(666),
|
|
bitlinkTrapWSMCli(667),
|
|
bittelnetWsmCli(668),
|
|
bitsyslogFacilityCli(669),
|
|
bitwsmResetCli(670),
|
|
bitwsmSaveCli(671),
|
|
bitwsmBootChoiceCli(672),
|
|
bitwsmDumpCardDBCli(673),
|
|
bitwsmDumpIPTableCli(674),
|
|
bitwsmDumpTableCli(675),
|
|
bithiddenModeCli(676),
|
|
bitresetSamCli(677),
|
|
bitsamBootBackupCli(678),
|
|
bitsamShowClusterCli(679),
|
|
bitoldieCli(680),
|
|
bitipCliSetBgpRedistApplyCli(681),
|
|
bitrcBgpPeerCli(682),
|
|
bitCliConfigIpBgpMaxInitPeersCli(683),
|
|
bitCliConfigIpBgpMaxTxQueueLenCli(684),
|
|
bitCliConfigIpBgpDebugScreenCli(685),
|
|
bitpolicySetOspfAcceptPrecedenceCli(686),
|
|
bitpolicySetOspfAnnouncePrecedenceCli(687),
|
|
bitpolicySetRipAcceptPrecedenceCli(688),
|
|
bitpolicySetRipAcceptRipIfListCli(689),
|
|
bitpolicySetRipAnnounceOutIfListCli(690),
|
|
bitpolicySetRipAnnouncePrecedenceCli(691),
|
|
bitpolicyRipAnnounceRemoveFromRtSrcCli(692),
|
|
bitospfCliModRangeEffectCli(693),
|
|
bitospfCliModRangeMetricCli(694),
|
|
bitospfCliSetVirtIfMd5KeyTxCli(695),
|
|
bitospfCliSetIfMd5KeyCli(696),
|
|
bitospfCliSetMd5KeyTxCli(697),
|
|
bitospfCliDelIfMd5KeyCli(698),
|
|
bitipCliSetOspfAcceptApplyCli(699),
|
|
bitospfCliSetDefMetricGrpCli(700),
|
|
bitospfCliSetSpfHoldDownTimeCli(701),
|
|
bitospfCliSetSpfRunCli(702),
|
|
bitospfCliSetTrapCli(703),
|
|
bitrcIpVrrpCliClearPortCli(704),
|
|
bitrcIpVrrpCliClearVlanCli(705),
|
|
bitrcIpResourceUsageGlobalGrp(706),
|
|
bitrcIpPimInterfaceTbl(707),
|
|
bitipmcCliSetDvmGlobDisCli(708),
|
|
bitipmcCliSetDvmGlobEnlCli(709),
|
|
bitipmcCliSetDvmGlobLeafTimeoutCli(710),
|
|
bitipmcCliSetDvmGlobNbrTimeoutCli(711),
|
|
bitipmcCliSetDvmGlobNbrProbeIntCli(712),
|
|
bitipmcCliSetDvmGlobTrigUpdateIntervalCli(713),
|
|
bitipmcCliSetDvmGlobUpdateIntervalCli(714),
|
|
bitipmcCliSetDvmGlobFwdCacheTimeoutCli(715),
|
|
bitipmcCliSetDvmGlobRouteExpireTimeoutCli(716),
|
|
bitipmcCliSetDvmGlobRouteDiscTimeoutCli(717),
|
|
bitipmcCliSetDvmGlobRouteSwitchTimeoutCli(718),
|
|
bitipmcCliSetDvmGlobShowNextHopTableCli(719),
|
|
bitipCliSetPimdebugAssertCli(720),
|
|
bitipCliSetPimdebugBootstrapCli(721),
|
|
bitipCliSetPimdebugGroupCli(722),
|
|
bitipCliSetPimdebugHelloCli(723),
|
|
bitipCliSetPimdebugJoinpruneCli(724),
|
|
bitipCliSetPimDbgTraceCli(725),
|
|
bitipCliSetPimDbgLogCli(726),
|
|
bitipCliSetPimdebugRegisterCli(727),
|
|
bitipCliSetPimdebugRegStopCli(728),
|
|
bitipCliSetPimdebugRpadvCli(729),
|
|
bitipCliSetPimdebugSendCli(730),
|
|
bitipCliSetPimdebugRcvCli(731),
|
|
bitipClienabletraceforSGentryCli(732),
|
|
bitipClidisabletraceforSGentryCli(733),
|
|
bitipCliSetPimGlobBrDisCli(734),
|
|
bitipCliSetPimGlobBrEnlCli(735),
|
|
bitportCliSetPimIfCreateCli(736),
|
|
bitportCliSetPimIfTypeCli(737),
|
|
bitdiagCliPingSnoopAddPortsCli(738),
|
|
bitdiagCliPingSnoopCreateCli(739),
|
|
bitdiagCliPingSnoopDeleteCli(740),
|
|
bitdiagCliPingSnoopEnaDisCli(741),
|
|
bitdiagCliPingSnoopRemPortsCli(742),
|
|
bitrcIpBgpPeerCli(743),
|
|
bitospfCliSetVirtIfMd5KeyCli(744),
|
|
bitospfCliDelVirtIfMd5KeyCli(745),
|
|
bitipSetOspfRedistApplyCli(746),
|
|
bitospfSetAutoVlinkCli(747),
|
|
bitospfSetTrapCli(748),
|
|
bitipSetPimdebugSourceCli(749),
|
|
bitportCliSetLoopDetectCli(750),
|
|
bitlogcliClearCli(751),
|
|
bitlogcliWriteCli(752),
|
|
bitsetAutoTraceHighPercentageCli(753),
|
|
bittracecliScreenCli(754),
|
|
bitripCliCliSetIfRxModeCli(755),
|
|
bitripSetIfTxModeCli(756),
|
|
bitripUpdateCli(757),
|
|
bitsysCliSetSendTrapConfigCli(758),
|
|
bitclilsCli(759),
|
|
bitclimkdirCli(760),
|
|
bittelnetSamCli(761),
|
|
bitsysCliV3UserSetCli(762),
|
|
bitsysCliV3GrpSetCli(763),
|
|
bitsysCliV3AccessSetCli(764),
|
|
bitsysCliV3NotifySetCli(765),
|
|
bitsysCliV3ViewSetCli(766),
|
|
bitsysCliV3TargetSetCli(767),
|
|
bitsysCliV3TargetParamsSetCli(768),
|
|
bitsnmpCliViewSetCli(769),
|
|
bitBcli8100Cli(770),
|
|
bitBcliAgentHacpuCli(771),
|
|
bitBcliAttribCli(772),
|
|
bitBcliAutobootCli(773),
|
|
bitBcliAutonegotiateCli(774),
|
|
bitBcliBaudCli(775),
|
|
bitBcliBootCli(776),
|
|
bitBcliBootpCli(777),
|
|
bitBcliCdCli(778),
|
|
bitBcliCfgfileCli(779),
|
|
bitBcliCopyCli(780),
|
|
bitBcliCpCli(781),
|
|
bitBcliCwcCli(782),
|
|
bitBcliDatabitsCli(783),
|
|
bitBcliDcdebugCli(784),
|
|
bitBcliDebugcfgCli(785),
|
|
bitBcliDebugmodeCli(786),
|
|
bitBcliDelayCli(787),
|
|
bitBcliWlandesiredssidCli(788),
|
|
bitBcliDirCli(789),
|
|
bitBcliDosChkdskCli(790),
|
|
bitBcliDosFormatCli(791),
|
|
bitBcliDstCli(792),
|
|
bitBcliDstendCli(793),
|
|
bitBcliDstnameCli(794),
|
|
bitBcliDstoffCli(795),
|
|
bitBcliDststartCli(796),
|
|
bitBcliDumpspromCli(797),
|
|
bitBcliEditCli(798),
|
|
bitBcliEgressloopCli(799),
|
|
bitBcliFactorydefaultsCli(800),
|
|
bitBcliFmmdebugCli(801),
|
|
bitBcliFmmFormatCli(802),
|
|
bitBcliFtpdCli(803),
|
|
bitBcliFtpdebugCli(804),
|
|
bitBcliFullduplexCli(805),
|
|
bitBcliGrepCli(806),
|
|
bitBcliHacpuCli(807),
|
|
bitBcliI2cdebugCli(808),
|
|
bitBcliImagefileCli(809),
|
|
bitBcliLsCli(810),
|
|
bitBcliMasterCli(811),
|
|
bitBcliMcpCli(812),
|
|
bitBcliMfgburninCli(813),
|
|
bitBcliMfgdCli(814),
|
|
bitBcliMfgledCli(815),
|
|
bitBcliMfgmCli(816),
|
|
bitBcliMgmtrouteCli(817),
|
|
bitBcliMkdirCli(818),
|
|
bitBcliMnetipCli(819),
|
|
bitBcliMoreCli(820),
|
|
bitBcliMoreflagCli(821),
|
|
bitBcliMulticastCli(822),
|
|
bitBcliMvCli(823),
|
|
bitBcliNetenableCli(824),
|
|
bitBcliNetipCli(825),
|
|
bitBcliNetrestartCli(826),
|
|
bitBcliNetspeedCli(827),
|
|
bitBcliPcdebugCli(828),
|
|
bitBcliPclogCli(829),
|
|
bitBcliPctraceCli(830),
|
|
bitBcliPeerCli(831),
|
|
bitBcliPingCli(832),
|
|
bitBcliProgrambootCli(833),
|
|
bitBcliPromptCli(834),
|
|
bitBcliPwcCli(835),
|
|
bitBcliPwdCli(836),
|
|
bitBcliRarudipsvCli(837),
|
|
bitBcliRarudrecCli(838),
|
|
bitBcliReadspromCli(839),
|
|
bitBcliRebootonerrorCli(840),
|
|
bitBcliResetCli(841),
|
|
bitBcliResetPasswordCli(842),
|
|
bitBcliRloginCli(843),
|
|
bitBcliRlogindCli(844),
|
|
bitBcliRloginlimitCli(845),
|
|
bitBcliRmCli(846),
|
|
bitBcliRshCli(847),
|
|
bitBcliSaveCli(848),
|
|
bitBcliSavetostandbyCli(849),
|
|
bitBcliScrsizeCli(850),
|
|
-- 851 is a duplicate and should not be used
|
|
bitBcliSetbootpimagenameCli(851),
|
|
bitBcliSioenableCli(852),
|
|
bitBcliSiomodeCli(853),
|
|
bitBcliSiomtuCli(854),
|
|
bitBcliSiomyipCli(855),
|
|
bitBcliSiopeeripCli(856),
|
|
bitBcliSiopppfileCli(857),
|
|
bitBcliSiorestartCli(858),
|
|
bitBcliSioslipcomCli(859),
|
|
bitBcliSiosliprxcomCli(860),
|
|
bitBcliSnmpdCli(861),
|
|
bitBcliSourceCli(862),
|
|
bitBcliSshdCli(863),
|
|
bitBcliTelnetCli(864),
|
|
bitBcliTelnetdCli(865),
|
|
bitBcliTelnetlimitCli(866),
|
|
bitBcliTestCli(867),
|
|
bitBcliTestspromCli(868),
|
|
bitBcliTftpdCli(869),
|
|
bitBcliTftpdebugCli(870),
|
|
bitBcliTftphashCli(871),
|
|
bitBcliTftphostCli(872),
|
|
bitBcliTftprexmitCli(873),
|
|
bitBcliTftptimeoutCli(874),
|
|
bitBcliTimeoutCli(875),
|
|
bitBcliTupleCli(876),
|
|
bitBcliTzCli(877),
|
|
bitBcliTzoffCli(878),
|
|
bitBcliUpdatebootCli(879),
|
|
bitBcliVerifycfgCli(880),
|
|
bitBcliVxataCli(881),
|
|
bitBcliVxdcCli(882),
|
|
bitBcliVxdosCli(883),
|
|
bitBcliVxinetCli(884),
|
|
bitBcliVxiosCli(885),
|
|
bitBcliVxmemCli(886),
|
|
bitBcliVxpasswordCli(887),
|
|
bitBcliVxpppCli(888),
|
|
bitBcliVxtiCli(889),
|
|
bitBcliVxuserCli(890),
|
|
bitBcliWdtCli(891),
|
|
bitBcliWlanCli(892),
|
|
bitBcliWlanconfigureCli(893),
|
|
bitBcliWriteRtcCli(894),
|
|
bitBcliWritespromCli(895),
|
|
-- 896 is a duplicate and should not be used
|
|
bitBootPCliSetImageNameCli(896),
|
|
bitBootPCliSettingCli(897),
|
|
bitExitTreeCli(898),
|
|
bitMacUpgradeCli(899),
|
|
bitPcmciaStopCli(900),
|
|
bitBcliPrivilegeCli(901),
|
|
bitBcliReadRtcCli(902),
|
|
bitShowHelpCli(903),
|
|
bitShowHistoryCli(904),
|
|
bitOpTreeCli(905),
|
|
bitUpOneTreeCli(906),
|
|
bitBcliHiSecureFlagCli(907),
|
|
bitBoxCli(908),
|
|
bitBcliBlockSwitchOverCli(909),
|
|
bitBcliCtrlRecOptimizeCli(910),
|
|
bitBcliLogParmsCli(911),
|
|
bitPasswordAgeCli(912),
|
|
bitLicenseLoadCli(913),
|
|
bitportCliUnknownMacDiscAddAllowMacCli(914),
|
|
-- 915 is a duplicate and should not be used
|
|
bitBootpCliSetImageNameCli(915),
|
|
bitdot3adAggTbl(916),
|
|
bitdot3adAggPortTbl(917),
|
|
bitrcLacpGlobalGrp(918),
|
|
bitrcPortLacpTbl(919),
|
|
bitrcPortVLacpTbl(920),
|
|
bitdot1xPaeSystemGrp(921),
|
|
bitdot1xAuthConfigTbl(922),
|
|
bitdot1xPaePortTbl(923),
|
|
bitdot3adrcPortLacpTbl(924),
|
|
bitrcPortRemoteMirroringTbl(925),
|
|
bitrcIpRsmltCli(926),
|
|
bitsysCliV3NotifyFilterSetCli(927),
|
|
bitsysCliV3NotifyProfileSetCli(928),
|
|
bitsysCliSetSnmpServerCli(929),
|
|
bitrcIpConfRsmltTbl(930),
|
|
bitrcIpxRsmltOperTbl(931),
|
|
bitcliLogCli(932),
|
|
bitipmcCliSetDvmGlobTrapEnlCli(933),
|
|
bitipmcCliSetDvmGlobLogEnlCli(934),
|
|
bitDismanPingTraceroute (935),
|
|
bitBcliSpbmConfigModeFlagCli(936),
|
|
|
|
bitNaapCli(974),
|
|
bitBcliAltLedEnableCli(975),
|
|
bitBcliBackupCfgfileCli(976),
|
|
bitrcBridgeFdbProtectTbl(977),
|
|
bitrcSysDnsServer(978),
|
|
bitBcli8616ReAutonegCli(979),
|
|
bitBcliBootpImageNameSetCli(980),
|
|
bitBcliMezzImageNameSetCli(981),
|
|
bitBcliMacUpgradeCli(982),
|
|
bitLoadConfigCli(983),
|
|
bitBcliBootpImageNameInfo(984),
|
|
bitospfCliSetRfc1583CompatibilityCli(985),
|
|
bitShExecuteCli(986),
|
|
bitsysCliSetHighThroughputModeCli(987),
|
|
bitsysCliSetUdpChecksumCli(988),
|
|
bitBcliMaintCommand(989),
|
|
bitExtCpLimit(990),
|
|
bitDumpCircuitcli(991),
|
|
bitcppStatscli(992),
|
|
bitfbuffDumpcli(993),
|
|
bitmemShowcli(994),
|
|
bitcheckStackcli(995),
|
|
bitrcDumpSnmpcli(996),
|
|
bitppeGetPortIsLinkUpcli(997),
|
|
bitshowPpcli(998),
|
|
bitdumpFacli(999),
|
|
bitsfDumpcli(1000),
|
|
bitpimVirtualNbrTbl(1012),
|
|
bitcliPasswordLockoutCli(1015),
|
|
bitcliPasswordHistoryCli(1016),
|
|
bitcliPasswordDefLockoutCli(1017),
|
|
bitAutoRecoverSet(1019),
|
|
bitAccessLevelEnDisCli(1020),
|
|
|
|
--TACACS+
|
|
bitrcTacacsGlobalGrp(1021),
|
|
bitrcTacacsServerTbl(1022),
|
|
|
|
bitPortCliSetSpoofDetectCli(1023),
|
|
bitBcliMd5Cli(1024),
|
|
bitBcliDumpfhCli(1025),
|
|
bitBcliMezzCardBootEnableCli(1027),
|
|
bitPasswordLenCli(1029),
|
|
bitBcliCheckSrcRouteCli(1030),
|
|
bitrcCfmGlobalsGrp(1053),
|
|
bitrcIsisCircuitTbl(1055),
|
|
bitisisCircTbl(1056),
|
|
bitisisCircLevelTbl(1057),
|
|
bitisisManAreaAddrTbl(1058),
|
|
bitisisSummAddrTbl(1059),
|
|
bitrcIsisGlobalGrp(1060),
|
|
bitisisSysObjectGrp(1061),
|
|
bitisisSysLevelTbl(1062),
|
|
bitipCliSetIsisRedistApply(1063),
|
|
bitisisCliClearStatsCli(1076),
|
|
bitLbmCmdCli(1091),
|
|
bitLtmCmdCli(1092),
|
|
bitrcCfmMaintenanceDomainTbl(1125),
|
|
bitrcCfmMaintenanceAssociationTbl(1126),
|
|
bitrcCfmMaintenanceEndPointTbl(1127),
|
|
|
|
bitBcliLicensefileCli(1129),
|
|
bitBcliBootpSecImageNameSetCli(1148),
|
|
|
|
bitrcMplsNotificationObjectsGrp(1149),
|
|
bitmplsLsrObjectsGrp(1150),
|
|
bitmplsTeObjectsGrp(1151),
|
|
bitmplsTunnelHopTbl(1152),
|
|
bitmplsTunnelTbl(1153),
|
|
bitmplsTunnelResourceTbl(1154),
|
|
bitrcMplsIpStaticFecTbl(1155),
|
|
bitmplsClearLspLdpRsvpStats(1156),
|
|
bitrcIpVpnRouteDistTbl(1157),
|
|
bitrcIpVpnRouteTargetTbl(1158),
|
|
bitrcVrfIpVpnTbl(1159),
|
|
bitrcIpBgpPeerTblIpvpnLiteCap(1160),
|
|
bitrcIpBgpPeerTblVpnv4Address(1161),
|
|
bitmplspingcli(1162),
|
|
bitrcPlsbGlobalGrp(1164),
|
|
bitrcIsisPlsbTbl(1165),
|
|
bitrcIsisCircuitPlsbTbl(1166),
|
|
bitrcIsidEndptCvidClientMipTbl(1168),
|
|
bitisisCliClearLsdbCli(1169),
|
|
bitL2PingCmdCli(1175),
|
|
bitL2TraceCmdCli(1176),
|
|
bitL2TraceReplyCmdCli(1177),
|
|
bitDebugL2vpnCmdCli(1178),
|
|
bitDebugIsisCmdCli(1179),
|
|
bitrcCfmTransmitL2TraceTbl(1180),
|
|
bitrcCfmTransmitL2McastTraceTbl(1181),
|
|
bitrcCfmTransmitLbmTbl(1182),
|
|
bitrcCfmTransmitLtmTbl(1183),
|
|
bitrcMACSecIfConfigTbl(1184),
|
|
bitrcMACSecCATbl(1185),
|
|
bitsecyIfTbl(1186),
|
|
bitrcIsisGlobalIpTunnelSrcAddr(1187),
|
|
bitrcIsisLogicalInterfaceTbl(1188),
|
|
bitrcDvrGlobalGrp(1189),
|
|
bitrcVxlanVtepSourceIp (1190),
|
|
bitrcVrfScalingGlobalGrp (1191),
|
|
bitrcChefClient (1192),
|
|
|
|
-- CardType bit numbers start here
|
|
bitcardType(1536),
|
|
bitrc2kCPU(1537),
|
|
bitrc2k48x100BaseTX(1538),
|
|
bitrc2k24x100BaseTX(1539),
|
|
bitrc2k24x100BaseFX(1540),
|
|
bitrc2k2xOC12(1541),
|
|
bitrc2k8xATM(1542),
|
|
bitrc2kRMON(1543),
|
|
bitrc2k8x1000BaseSXBB(1544),
|
|
bitrc2k8x1000BaseLXBB(1545),
|
|
bitrc2k8x1000BaseSXRBB(1546),
|
|
bitrc2k8x1000BaseLXRBB(1547),
|
|
bitrc2k8x1000BaseXDBB(1548),
|
|
bitrc2k8xOC3(1549),
|
|
bitrc2kMg32x100BaseTX(1550),
|
|
bitrc2kMg48x100BaseTX(1551),
|
|
bitrc2kMg16x100BaseFX(1552),
|
|
bitrc2kMg8x1000BaseIC(1553),
|
|
bitrc2k8x1000BaseIC(1554),
|
|
bitrc2kMg48x100BaseTC(1555),
|
|
bitrc2k6xPOS(1556),
|
|
bitrc2k16x1000BaseSXBB(1557),
|
|
bitrc2k8x1000BaseT(1558),
|
|
bitrc2k32x100BaseTX(1559),
|
|
bitrc2k1x10GBaseLW(1560),
|
|
bitrc2k16x1000BaseT(1561),
|
|
bitrc2k1x10GBaseLR(1562),
|
|
bitrc2kAlteonWSM(1563),
|
|
bitrc2k48x100BaseTXM(1564),
|
|
bitrc2k32x100BaseTXM(1565),
|
|
bitrc2k8x1000BaseICM(1566),
|
|
bitrc2k8x1000BaseSXBBM(1567),
|
|
bitrc2k8x1000BaseTM(1568),
|
|
bitrc2k8xATMM(1569),
|
|
bitrc2k6xPOSM(1570),
|
|
-- Thunderbolt: 1571 - 1578 have been removed
|
|
bitrc2kPP8300-CPU8x1000BaseSFP(1579),
|
|
bitrc2kPP8300-24x1000BaseTX(1580),
|
|
bitrc2kPP8300-48x100BaseTX(1581),
|
|
bitrc2kPP8300-48x100BaseTXPOE(1582),
|
|
bitrc2kAlteonLP(1583),
|
|
bitrc2kAlteonASFM(1584),
|
|
bitrc2k61AlteonSAM(1585),
|
|
bitrc2k62AlteonSAM(1586),
|
|
bitrcMplsGlobalGrp(1603),
|
|
bitrcIpMplsInterfaceTbl(1604),
|
|
bitrcVrfConfigTbl(1605),
|
|
bitrcVrfIfConfigTbl(1606),
|
|
bitrcIpv6InterfaceTbl(1607),
|
|
bitrcIpv6AddrTbl(1608),
|
|
bitrcIpv6PrefixTbl(1609),
|
|
bitrcIpv6RouterAdvertTbl(1610),
|
|
bitrcIpv6StaticRouteTbl(1611),
|
|
bitrcIpv6NetToPhysicalTbl(1612),
|
|
bitrcIpv6Scalars(1613),
|
|
bitrcPrFilterAceIpv6SrcAddrTbl(1614),
|
|
bitrcPrFilterAceIpv6DstAddrTbl(1615),
|
|
bitrcPrFilterAceIpv6NextHdr(1616),
|
|
bitrc2kCpuEthernetPortIpv6RouteTbl(1617),
|
|
bitrcIpv6PimGlobalGrp(1618),
|
|
bitrcIpv6PimTbl(1619),
|
|
bitrcIpv6PimStaticRPTbl(1620),
|
|
bitrcIpv6pimVirtualNbrTbl(1621),
|
|
bitrcIpv6MulticastTimedPruneTbl(1622),
|
|
bitrcIpv6MulticastSoftwareForwarding(1623),
|
|
bitrcIpv6PimInterfaceTbl(1624),
|
|
bitrcIpv6MltMcastDistributionGrp(1625),
|
|
bitrcIpv6ResourceUsageGlobalGrp(1626),
|
|
bitIpv6InterfaceTbl(1627),
|
|
bitIpv6RouteTbl(1628),
|
|
bitIpv6NetToMediaTbl(1629),
|
|
bitIpv6MIBObjects(1630),
|
|
bittunnelIfTbl(1631),
|
|
bittunnelInetConfigTbl(1632),
|
|
bitmldInterfaceTbl(1633),
|
|
bitmldCacheTbl(1634),
|
|
bitrcIpv6Ospfv3NbmaNbrTbl(1635),
|
|
bitrcIpv6Ospfv3IfTbl(1636),
|
|
bitrcIpv6Ospfv3VirtIf(1637),
|
|
bitrcIpv6Ospfv3AreaAggregateTbl(1638),
|
|
bitrcIpv6Ospfv3AreaTbl(1639),
|
|
bitrcIpv6Ospfv3GeneralGrp(1640),
|
|
bitrc2kPR48X1000BaseTX(1641),
|
|
bitrc2kPR30X1000BaseSXBB(1642),
|
|
bitrc2kPR3X10GBaseXZW(1643),
|
|
bitrc2kPR3X10GBaseGbic(1644),
|
|
bitrcIpfixConfGlobalGrp(1645),
|
|
bitrcIpfixConfSlotTbl(1646),
|
|
bitrcIpfixCollectorTbl(1647),
|
|
bitrcIpfixConfPortTbl(1648),
|
|
bitrcIpfixHashStatsTbl(1649),
|
|
bitrcIpfixExporterStatsTbl(1650),
|
|
bitTreeSnmp(1654),
|
|
bitInfoCmdSnmp(1655),
|
|
bitShowCmdSnmp(1656),
|
|
bitsnmpLogSnmp(1657),
|
|
bitrc2kPR48x1000BaseGBRS(1658),
|
|
bitrc2kPR48x1000BaseGTRS(1659),
|
|
bitrc2kPR12X10GBaseXLRS(1660),
|
|
bitrc2kPR34xXGRS(1661),
|
|
bitrcPrQosEgressQosToExpTbl(1662),
|
|
bitrcPrQosIngressExpToQosTbl(1663),
|
|
bitrcPomConfGlobalGrp(1664),
|
|
bitrcIpv6DhcpForwardTbl(1672),
|
|
bitrcIpv6ConfDhcpTbl(1673),
|
|
bitrcIpv6VrrpOperTbl(1674),
|
|
bitrcVrrpExtScalarsGrp(1675),
|
|
bitrcVrrpTmpOperationsGrp(1676),
|
|
bitrcIpMulticastSquareSmltGrp(1677),
|
|
bitrcPortLosslessEnetTbl(1684),
|
|
bitrcPrFilterAceIpv6TrafficClsTbl(1685),
|
|
bitrcIsisPlsbIpShortcut(1686),
|
|
bitrcIpIsisInFilter(1687),
|
|
bitcbAUX(1700),
|
|
bitcbSF3200(1701),
|
|
bitcbSF9600(1702),
|
|
bitcbCP-CSC(1703),
|
|
bitcb48x1000BaseTX(1704),
|
|
bitcb48x1000BaseTXPOE(1705),
|
|
bitcb48x1000SFP(1706),
|
|
bitcb24x10GBaseSFP(1707),
|
|
bitcb48x10GBaseSFP(1708),
|
|
bitrcIpRedistributeTblIsis(1721),
|
|
bitrofLoadBoard(1729),
|
|
bitvsp4k4850GTS(1730),
|
|
bitvsp4k4850GTSPWRPLUS(1731),
|
|
bitcbSF9610(1732),
|
|
bitvsp8k8242XSQ(1739),
|
|
bitvsp4k4450GTXHTPWRPLUS(1740),
|
|
bitvsp8k8424XS(1741),
|
|
bitvsp8k8408QQ(1742),
|
|
bitvsp8k8418XSQ(1743),
|
|
bitvsp8k8418XTQ(1744),
|
|
bitvsp8k8424GS(1745),
|
|
bitvsp8k8424GT(1746),
|
|
bitvsp8k8424XT(1747),
|
|
bitvsp7k7248XS(1748),
|
|
bitvsp7k7248XT(1749),
|
|
bitvsp4k4450GSX(1750),
|
|
bitvsp7k7206QQ(1751),
|
|
bitvsp8624XS(1752),
|
|
bitvsp8624XT(1753),
|
|
bitvsp8616QQ(1754),
|
|
bitvsp8606CQ(1755),
|
|
bitvsp8600SF(1756),
|
|
bitdsg8016QQ(1757),
|
|
bitvsp8k8402CQ(1758),
|
|
bitdsg9016CQ(1759),
|
|
bitdsg8032QQ(1760),
|
|
bitlastbitnum(2047)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bit position number of license bitmap"
|
|
::= { rcLicense 1 }
|
|
|
|
rcLicenseBitMap OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "License bit map. Bitmap number is defined in rcLicenseNumber"
|
|
::= { rcLicense 2 }
|
|
rcLicenseFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current running license file name.
|
|
Empty mean no license running. Empty means
|
|
there is no license file installed"
|
|
::= { rcLicense 3 }
|
|
|
|
rcLicenseLicenseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
base(2),
|
|
advance(3),
|
|
premier(4),
|
|
premierPlusMacsec(5),
|
|
port(6),
|
|
premierWithPort(7),
|
|
premierPlusMacsecWithPort(8),
|
|
unknown(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This indicates the current running license
|
|
level type"
|
|
::= { rcLicense 4 }
|
|
|
|
rcLicenseDurationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
trialFactoryDefault(2),
|
|
trialLicense(3),
|
|
timeBased(4),
|
|
perpetual(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This indicates the current running license duration type"
|
|
::= { rcLicense 5}
|
|
|
|
rcLicenseFactoryTrialPeriodRemainingDays OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This indicates days left before the factory default
|
|
trial period expired. Only applicable to the
|
|
type trialFactoryDefault(2) iin object rcLicenseDurationType.
|
|
Otherwise, it will be always set to 0"
|
|
::= { rcLicense 6}
|
|
|
|
rcLicenseDaysLeftBeforeExpiration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This indicates days left before time based
|
|
license expire. Only applicable to Time
|
|
Based license and trial period."
|
|
::= { rcLicense 7}
|
|
rcLicenseDaysAfterExpiration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Number of days the license has been expired.
|
|
It is only applicable to non permanet type"
|
|
::= { rcLicense 8}
|
|
|
|
rcLicenseGenerationTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Date of the license file is generated. It
|
|
there is no license file, value '0000000000000000'H
|
|
will be returned"
|
|
::= { rcLicense 9}
|
|
|
|
rcLicenseExpirationTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Date of the license file is expired. If there is
|
|
no license file or license file has no expiration date
|
|
date (perpetual license), value '0000000000000000'H
|
|
will be returned"
|
|
::= { rcLicense 10}
|
|
|
|
|
|
-- end of rcLicense
|
|
|
|
rcSslMipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSslMipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table would display the MIP of the SSL blade
|
|
according to the slot number."
|
|
::= { rcSsh 2 }
|
|
|
|
rcSslMipTableEntry OBJECT-TYPE
|
|
SYNTAX RcSslMipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table get the MIP of the SSL blade on which
|
|
the blade is in different cluster."
|
|
INDEX { rcSslMipSlot }
|
|
::= { rcSslMipTable 1 }
|
|
|
|
RcSslMipEntry ::=
|
|
SEQUENCE {
|
|
rcSslMipSlot Integer32,
|
|
rcSslMipMip DisplayString
|
|
}
|
|
|
|
rcSslMipSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used as an index to find out the MIP of SSL blade."
|
|
::= { rcSslMipTableEntry 1 }
|
|
|
|
rcSslMipMip OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Master IP of the SSL blade."
|
|
::= { rcSslMipTableEntry 2 }
|
|
|
|
-- SSHC Group
|
|
-- SSHC Global Information.
|
|
|
|
rcSshcGlobal OBJECT IDENTIFIER ::= { rcSsh 3 }
|
|
|
|
rcSshcGlobalActiveSessions OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Number of SSHC active sessions"
|
|
DEFVAL { 0 }
|
|
::= { rcSshcGlobal 1 }
|
|
|
|
rcSshcGlobalPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SSHC connection port."
|
|
DEFVAL { 22 }
|
|
::= { rcSshcGlobal 2 }
|
|
|
|
rcSshcGlobalAuthenticationTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..120)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Authentication timeout in seconds."
|
|
DEFVAL { 30 }
|
|
::= { rcSshcGlobal 3 }
|
|
|
|
rcSshcGlobalDsaAuthentication OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication using DSA."
|
|
DEFVAL { true }
|
|
::= { rcSshcGlobal 4 }
|
|
|
|
rcSshcGlobalPasswordAuthentication OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication using password."
|
|
DEFVAL { false }
|
|
::= { rcSshcGlobal 5 }
|
|
|
|
rcSshcGlobalUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User name."
|
|
::= { rcSshcGlobal 6 }
|
|
|
|
rcSshcGlobalSftpServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "SFTP server IPv4 address."
|
|
::= { rcSshcGlobal 7 }
|
|
|
|
rcSshcGlobalDsaKeySize OBJECT-TYPE
|
|
SYNTAX Integer32 (0|512..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Size of the SSH Client DSA key. Must be a multiple of 64."
|
|
DEFVAL { 512 }
|
|
::= { rcSshcGlobal 8 }
|
|
|
|
rcSshcGlobalRsaKeySize OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1024..2048)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SSH Client RSA key size. Must be a multiple of 128."
|
|
DEFVAL { 1024 }
|
|
::= { rcSshcGlobal 9 }
|
|
|
|
rcSshcGlobalRsaAuth OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Enable/disable SSH Client RSA authentication"
|
|
DEFVAL { true }
|
|
::= { rcSshcGlobal 10 }
|
|
|
|
rcSshcGlobalDsaAuth OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Enable/disable SSH Client DSA authentication"
|
|
DEFVAL { true }
|
|
::= { rcSshcGlobal 11 }
|
|
|
|
rcSshcGlobalPassAuth OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "Enable/disable SSH Client password authentication"
|
|
DEFVAL { true }
|
|
::= { rcSshcGlobal 12 }
|
|
|
|
rcSshcGlobalKeyAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
generateDsa(1),
|
|
generateRsa(2),
|
|
deleteDsa(3),
|
|
deleteRsa(4),
|
|
generateDsaForce(5),
|
|
generateRsaForce(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SSH Client key action. The actions generateDsa(1) and
|
|
generateRsa(2) initiate the generation of the DSA key
|
|
or RSA key if the key is not already generated. deleteDsa(3)
|
|
and deleteRsa(4) actions delete the respective DSA or RSA key
|
|
if one was generated.
|
|
To generate a new key overwriting an existing key
|
|
generateDsaForce(5) or generateRsaForce(6) must be used."
|
|
::= { rcSshcGlobal 13 }
|
|
|
|
rcSshcGlobalDsaHostKeyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notGenerated(1),
|
|
generated(2),
|
|
generating(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the current status of the SSH
|
|
DSA host key. If the DSA host key has not yet been
|
|
generated, the value will be notGenerated(1). If it
|
|
has already been generated, the value will be
|
|
generated(2). If it is currently being generated,
|
|
the value will be generating(3)."
|
|
::= { rcSshcGlobal 14 }
|
|
|
|
rcSshcGlobalRsaHostKeyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notGenerated(1),
|
|
generated(2),
|
|
generating(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the current status of the SSH
|
|
RSA host key. If the RSA host key has not yet been
|
|
generated, the value will be notGenerated(1). If it
|
|
has already been generated, the value will be
|
|
generated(2). If it is currently being generated,
|
|
the value will be generating(3)."
|
|
::= { rcSshcGlobal 15 }
|
|
|
|
rcSshcGlobalTftpAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
uploadSshcDsaAuthKey(2),
|
|
uploadSshcRsaAuthKey(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object may be set to initiate a TFTP upload of
|
|
SSH Client public keys. When retrieved, the value will alwa
|
|
ys
|
|
be none(1)."
|
|
::= { rcSshcGlobal 16 }
|
|
|
|
rcSshcGlobalUsbAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
uploadSshcDsaAuthKey(2),
|
|
uploadSshcRsaAuthKey(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object may be set to initiate a USB upload of
|
|
SSH Client public keys. When retrieved, the value will alwa
|
|
ys
|
|
be none(1)."
|
|
::= { rcSshcGlobal 17 }
|
|
|
|
rcSshcGlobalKeyFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of the key file on the TFTP server or USB where the key is uploaded"
|
|
::= { rcSshcGlobal 18 }
|
|
|
|
rcSshcGlobalRsaAuthenthication OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set to true to use RSA authentication to the SFTP server. When toggling the
|
|
value from true to false the default authentication method (DSA key) will
|
|
be activated"
|
|
DEFVAL { false }
|
|
::= { rcSshcGlobal 19 }
|
|
|
|
rcSshcGlobalSftpServerPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The password used for SFTP authentication"
|
|
::= { rcSshcGlobal 20 }
|
|
|
|
rcSshcGlobalSftpServerInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SFTP server IP address type."
|
|
::= { rcSshcGlobal 21 }
|
|
|
|
rcSshcGlobalSftpServerInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SFTP server IP address."
|
|
::= { rcSshcGlobal 22 }
|
|
|
|
-- LACP Group
|
|
-- LACP Global Information.
|
|
|
|
-- =begin enum
|
|
-- rcLacpGlobalFastPeriodicTime min 200
|
|
-- =end enum
|
|
|
|
rcLacpGlobal OBJECT IDENTIFIER ::= { rcLacp 1 }
|
|
|
|
rcLacpGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "globally enable/disable LACP"
|
|
DEFVAL { false }
|
|
::= { rcLacpGlobal 1 }
|
|
|
|
rcLacpGlobalSystemPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "set system priority to all the LACP enabled aggregators
|
|
and prots"
|
|
DEFVAL { 32768 }
|
|
::= { rcLacpGlobal 2 }
|
|
|
|
rcLacpGlobalFastPeriodicTime OBJECT-TYPE
|
|
SYNTAX INTEGER (100..20000) -- user (200..20000) in VSP
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of miliseconds between periodic transmissions
|
|
using Short Timeouts. Set this value to all LACP enabled ports."
|
|
DEFVAL { 1000 }
|
|
::= { rcLacpGlobal 3 }
|
|
|
|
rcLacpGlobalSlowPeriodicTime OBJECT-TYPE
|
|
SYNTAX INTEGER (10000..30000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of miliseconds between periodic transmissions
|
|
using LONG Timeouts. Set this value to all LACP enabled ports."
|
|
DEFVAL { 30000 }
|
|
::= { rcLacpGlobal 4 }
|
|
|
|
rcLacpGlobalTimeoutScale OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Scalar value used to calculate timeout time from
|
|
periodic time. Set this value to all LACP enabled ports."
|
|
DEFVAL { 3 }
|
|
::= { rcLacpGlobal 5 }
|
|
|
|
rcLacpGlobalAggrWaitTime OBJECT-TYPE
|
|
SYNTAX INTEGER (200..2000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of mili seconds to delay aggregation to
|
|
allow multiple links to aggregate simultaneously."
|
|
DEFVAL { 2000 }
|
|
::= { rcLacpGlobal 6 }
|
|
|
|
rcLacpGlobalVlacpEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "globally enable/disable Virtual LACP"
|
|
DEFVAL { false }
|
|
::= { rcLacpGlobal 7 }
|
|
|
|
rcLacpGlobalVlacpMulticastMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Virtual LACP multicast MAC address"
|
|
::= { rcLacpGlobal 8 }
|
|
|
|
rcLacpGlobalFastPeriodicTimeOper OBJECT-TYPE
|
|
SYNTAX INTEGER (200..20000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operating value of global fast periodic timer."
|
|
::= { rcLacpGlobal 9 }
|
|
|
|
rcLacpGlobalSlowPeriodicTimeOper OBJECT-TYPE
|
|
SYNTAX INTEGER (10000..30000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operating value of global show periodic time."
|
|
::= { rcLacpGlobal 10 }
|
|
|
|
rcLacpGlobalTimeoutScaleOper OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operating value of global timeout scale."
|
|
::= { rcLacpGlobal 11 }
|
|
|
|
rcLacpGlobalAggrWaitTimeOper OBJECT-TYPE
|
|
SYNTAX INTEGER (200..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operating value of global aggregate wait time."
|
|
::= { rcLacpGlobal 12 }
|
|
|
|
rcLacpGlobalSmltSysId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "LACP system ID for SMLT"
|
|
::= { rcLacpGlobal 13 }
|
|
|
|
rcLacpGlobalSystemMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "LACP system MAC."
|
|
::= { rcLacpGlobal 14 }
|
|
|
|
rcLacpGlobalVlacpHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of seconds to hold down all vlacp enabled links"
|
|
::= { rcLacpGlobal 15 }
|
|
|
|
rcLacpGlobalVlacpSeqNumEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "globally enable/disable Virtual LACP Sequence Number"
|
|
DEFVAL { true }
|
|
::= { rcLacpGlobal 16 }
|
|
|
|
-- rcVlacpPeerMacAddressTable
|
|
|
|
rcVlacpPeerMacAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVlacpPeerMacAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " Virtual LACP Peer Mac Address table"
|
|
::= { rcLacp 2 }
|
|
|
|
rcVlacpPeerMacAddressEntry OBJECT-TYPE
|
|
SYNTAX RcVlacpPeerMacAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular peer"
|
|
INDEX { rcVlacpPeerMacAddressMAC }
|
|
::= { rcVlacpPeerMacAddressTable 1 }
|
|
|
|
RcVlacpPeerMacAddressEntry ::= SEQUENCE {
|
|
rcVlacpPeerMacAddressMAC MacAddress,
|
|
rcVlacpPeerMacAddressMltId Integer32,
|
|
rcVlacpPeerMacAddressPort InterfaceIndex,
|
|
rcVlacpPeerMacAddressIpAddr IpAddress,
|
|
rcVlacpPeerMacAddressRowStatus RowStatus
|
|
}
|
|
|
|
rcVlacpPeerMacAddressMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Virtual LACP peer mac address on a port/MLT"
|
|
::= { rcVlacpPeerMacAddressEntry 1 }
|
|
|
|
rcVlacpPeerMacAddressMltId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "MLT Id on which Virtual LACP peer mac address is
|
|
directly or indirectly connected"
|
|
::= { rcVlacpPeerMacAddressEntry 2 }
|
|
|
|
rcVlacpPeerMacAddressPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ports on which Virtual LACP peer mac address is
|
|
directly or indirectly connected"
|
|
::= { rcVlacpPeerMacAddressEntry 3 }
|
|
|
|
rcVlacpPeerMacAddressIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Virtual LACP peer Ip Address on port/MLT"
|
|
::= { rcVlacpPeerMacAddressEntry 4 }
|
|
|
|
rcVlacpPeerMacAddressRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the peer address table"
|
|
::= { rcVlacpPeerMacAddressEntry 5 }
|
|
|
|
rcVlacpGlobal OBJECT IDENTIFIER ::= { rcLacp 3 }
|
|
|
|
rcVlacpGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Globally enable/disable VLACP. This MIB object is replacing
|
|
rcLacpGlobalVlacpEnable for 8600."
|
|
DEFVAL { false }
|
|
::= { rcVlacpGlobal 1 }
|
|
|
|
rcVlacpGlobalFastPeriodicTime OBJECT-TYPE
|
|
SYNTAX Integer32 (10..20000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of milliseconds between periodic transmissions
|
|
using Short Timeouts."
|
|
DEFVAL { 200 }
|
|
::= { rcVlacpGlobal 2 }
|
|
|
|
rcVlacpGlobalSlowPeriodicTime OBJECT-TYPE
|
|
SYNTAX Integer32 (10000..30000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of milliseconds between periodic transmissions
|
|
using LONG Timeouts."
|
|
DEFVAL { 30000 }
|
|
::= { rcVlacpGlobal 3 }
|
|
|
|
rcVlacpGlobalTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
short(1),
|
|
long(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Sets the VLACP Global timeout value."
|
|
DEFVAL { long }
|
|
::= { rcVlacpGlobal 4 }
|
|
|
|
rcVlacpGlobalTimeoutScale OBJECT-TYPE
|
|
SYNTAX Integer32 (2..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Scalar value used to calculate timeout time from
|
|
periodic time."
|
|
DEFVAL { 3 }
|
|
::= { rcVlacpGlobal 5 }
|
|
|
|
rcVlacpGlobalMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Multicast Mac Address exclusively used for VLACP Pdus."
|
|
::= { rcVlacpGlobal 6 }
|
|
|
|
rcVlacpApplyGlobalToPort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Applies Global values to port parameters when true."
|
|
DEFVAL { false }
|
|
::= { rcVlacpGlobal 7 }
|
|
|
|
-- rcLacpKeyTable
|
|
|
|
rcLacpKeyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcLacpKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of settings associated with specific LACP keys."
|
|
::= { rcLacp 4 }
|
|
|
|
rcLacpKeyEntry OBJECT-TYPE
|
|
SYNTAX RcLacpKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing data associated with a specific LACP key."
|
|
INDEX { rcLacpKeyValue }
|
|
::= { rcLacpKeyTable 1 }
|
|
|
|
RcLacpKeyEntry ::= SEQUENCE {
|
|
rcLacpKeyValue Unsigned32,
|
|
rcLacpKeyRowStatus RowStatus,
|
|
rcLacpKeyMltId Unsigned32,
|
|
rcLacpKeySmltId Unsigned32
|
|
}
|
|
|
|
rcLacpKeyValue OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LACP key value to which settings are associated."
|
|
::= { rcLacpKeyEntry 1 }
|
|
|
|
rcLacpKeyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to create/delete entries in the lacp key table"
|
|
::= { rcLacpKeyEntry 2 }
|
|
|
|
rcLacpKeyMltId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MLT Id associated with this key value."
|
|
::= { rcLacpKeyEntry 3 }
|
|
|
|
rcLacpKeySmltId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SMLT Id associated with this key value."
|
|
::= { rcLacpKeyEntry 4 }
|
|
|
|
-- LacpMismatch Information.
|
|
|
|
rcLacpNotificationObjects OBJECT IDENTIFIER ::= { rcLacp 5 }
|
|
|
|
rcLacpMisconfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
globalLacpDisable(1),
|
|
portLevelLacpDisable(2),
|
|
globalAndPortLacpDisable(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This indicates the reason for Lacp Misconfig trap.
|
|
Used by rcnLacpMisconfigTrap trap."
|
|
::= { rcLacpNotificationObjects 1 }
|
|
|
|
-- End of LacpMismatch Information.
|
|
|
|
-- GlobalMacFilter Changes
|
|
|
|
rcGlobalMacFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcGlobalMacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of Global Mac filter entries."
|
|
::= { rcFdb 1 }
|
|
|
|
rcGlobalMacFilterEntry OBJECT-TYPE
|
|
SYNTAX RcGlobalMacFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "this entry is used for global mac filtering.Any Mac
|
|
address configured here will be discarded globally
|
|
by the switch."
|
|
INDEX { rcGlobalMacFilterAddress }
|
|
::= { rcGlobalMacFilterTable 1 }
|
|
|
|
RcGlobalMacFilterEntry ::=
|
|
SEQUENCE {
|
|
rcGlobalMacFilterAddress MacAddress,
|
|
rcGlobalMacFilterRowStatus RowStatus
|
|
}
|
|
|
|
rcGlobalMacFilterAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A MAC address which will be discarded globally by
|
|
the switch"
|
|
::= { rcGlobalMacFilterEntry 1 }
|
|
|
|
rcGlobalMacFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in rcGlobalMacFilterTable."
|
|
::= { rcGlobalMacFilterEntry 2 }
|
|
|
|
rcPowerRangerMib OBJECT IDENTIFIER ::= { rcPowerRanger 1 }
|
|
rcPowerRangerNotifications OBJECT IDENTIFIER ::= { rcPowerRangerMib 0 }
|
|
rcPowerRangerObjects OBJECT IDENTIFIER ::= { rcPowerRangerMib 1 }
|
|
|
|
--
|
|
-- Object groups within the Power Ranger MIB
|
|
--
|
|
|
|
rcPrQos OBJECT IDENTIFIER ::= { rcPowerRangerObjects 1 }
|
|
rcPrFilter OBJECT IDENTIFIER ::= { rcPowerRangerObjects 2 }
|
|
|
|
--
|
|
-- The rcPrQos group
|
|
--
|
|
|
|
rcPrQosScalars OBJECT IDENTIFIER ::= { rcPrQos 1 }
|
|
|
|
LaneSet ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of lanes that are members of this Global
|
|
Policer. The string is 4 octets long, for a total
|
|
of 32 bits. Each bit corresponds to a laneId.
|
|
Each I/O slot has 4 laneIds. When a bit has the
|
|
value one(1), the corresponding laneId is a member
|
|
of the set. When a bit has the value zero(0), the
|
|
corresponding laneId is not a member of the set.
|
|
The encoding is such that the most significant bit
|
|
of octet #1 corresponds to laneId 0, while the
|
|
least significant bit of octet #4 corresponds to
|
|
laneId 31."
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
|
|
IsisSystemID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A system ID."
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
|
|
rcPrQosPolicyNumPolicies OBJECT-TYPE
|
|
SYNTAX INTEGER (0..12288)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A list of Global Policer (GPID) entries.
|
|
The number of entries is given by
|
|
rcPrQosPolicyNumPolicies."
|
|
::= { rcPrQosScalars 1 }
|
|
|
|
rcPrQosTxQueueNumTemplates OBJECT-TYPE
|
|
SYNTAX INTEGER (0..383)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of egress queue templates currently
|
|
defined in the switch."
|
|
::= { rcPrQosScalars 2 }
|
|
|
|
rcPrQosFlowPolicerStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear all box-wide policer statistics."
|
|
::= { rcPrQosScalars 3 }
|
|
|
|
rcPrQosLossless8021p OBJECT-TYPE
|
|
SYNTAX Integer32 (0..6)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value used to map Ingress IEEE 1p to lossless
|
|
internal Qos when lossless Ethernet mode is enabled."
|
|
::= { rcPrQosScalars 4 }
|
|
|
|
rcPrQosLosslessPfcEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If true then at least one lossless port in the
|
|
switch has been configured with the value of
|
|
rcPortLosslessEnetPauseType set to pfc(2).
|
|
If false then either all lossless ports are currently
|
|
in fc(1) mode, or no ports are configured in
|
|
lossless mode."
|
|
::= { rcPrQosScalars 5 }
|
|
|
|
rcPrQosLosslessPortsEnablePending OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used to inform the system which ports
|
|
are pending lossless enable and is for internal use."
|
|
::= { rcPrQosScalars 6 }
|
|
|
|
rcPrQosLosslessPortsOperPending OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates which ports which would be brought down
|
|
operationally if the set of ports indicated in
|
|
rcPrQosLosslessPortsEnablePending are configured
|
|
for lossless operation."
|
|
::= { rcPrQosScalars 7 }
|
|
|
|
-- Power Ranger Qos Policy Policers Table
|
|
rcPrQosPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of GPID entries. The number of entries is
|
|
given by rcPrQosPolicyNumPolicies."
|
|
::= { rcPrQos 2 }
|
|
|
|
rcPrQosPolicyEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular global policer."
|
|
INDEX { rcPrQosPolicyGpId }
|
|
::= { rcPrQosPolicyTable 1 }
|
|
|
|
RcPrQosPolicyEntry ::= SEQUENCE {
|
|
rcPrQosPolicyGpId INTEGER,
|
|
rcPrQosPolicyName DisplayString,
|
|
rcPrQosPolicyPeakRate INTEGER,
|
|
rcPrQosPolicySvcRate INTEGER,
|
|
rcPrQosPolicyLaneMembers LaneSet,
|
|
rcPrQosPolicyRowStatus RowStatus
|
|
}
|
|
|
|
rcPrQosPolicyGpId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies Global Policer
|
|
associated with this entry."
|
|
::= { rcPrQosPolicyEntry 1 }
|
|
|
|
rcPrQosPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this Global
|
|
Policer."
|
|
::= { rcPrQosPolicyEntry 2 }
|
|
|
|
rcPrQosPolicyPeakRate OBJECT-TYPE
|
|
SYNTAX INTEGER (64..5000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Global Policer Peak Rate in Kilobit/sec."
|
|
::= { rcPrQosPolicyEntry 3 }
|
|
|
|
rcPrQosPolicySvcRate OBJECT-TYPE
|
|
SYNTAX INTEGER (64..5000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Global Policer Service Rate in Kilobit/sec."
|
|
::= { rcPrQosPolicyEntry 4 }
|
|
|
|
rcPrQosPolicyLaneMembers OBJECT-TYPE
|
|
SYNTAX LaneSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of lanes that are members of this Global
|
|
Policer. The string is 4 octets long, for a total
|
|
of 32 bits. Each bit corresponds to a laneId.
|
|
Each I/O slot has 4 laneIds. When a bit has the
|
|
value one(1), the corresponding laneId is a member
|
|
of the set. When a bit has the value zero(0), the
|
|
corresponding laneId is not a member of the set.
|
|
The encoding is such that the most significant bit
|
|
of octet #1 corresponds to laneId 0, while the
|
|
least significant bit of octet #4 corresponds to
|
|
laneId 31."
|
|
::= { rcPrQosPolicyEntry 5 }
|
|
|
|
rcPrQosPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrQosPolicyEntry 6}
|
|
|
|
|
|
-- Power Ranger Qos Local Policer Table
|
|
|
|
-- For CB the rcPrQosLocalPolicyTable will be used to collect statistics
|
|
-- on a per-policy basis. The upper range is 16000.
|
|
|
|
rcPrQosLocalPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosLocalPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of policer entries."
|
|
::= { rcPrQos 3 }
|
|
|
|
rcPrQosLocalPolicyEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosLocalPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing configuration information for
|
|
a particular local policer. This field will
|
|
return 0 for CB as tap.lane.lpid is not used."
|
|
INDEX { rcPrQosLocalPolicyGpId,
|
|
rcPrQosLocalPolicyIndex }
|
|
::= { rcPrQosLocalPolicyTable 1 }
|
|
|
|
RcPrQosLocalPolicyEntry ::= SEQUENCE {
|
|
rcPrQosLocalPolicyGpId INTEGER,
|
|
rcPrQosLocalPolicyIndex Integer32,
|
|
rcPrQosLocalPolicyPeakRate INTEGER,
|
|
rcPrQosLocalPolicySvcRate INTEGER,
|
|
rcPrQosLocalPolicyTotalPkts Counter64,
|
|
rcPrQosLocalPolicyTotalBytes Counter64,
|
|
rcPrQosLocalPolicyBytesOverPeak Counter64,
|
|
rcPrQosLocalPolicyBytesOverSvc Counter64,
|
|
rcPrQosLocalPolicyTotalPktsDropped Counter64,
|
|
rcPrQosLocalPolicyLaneMember OCTET STRING,
|
|
rcPrQosLocalPolicyGreenPackets Counter64,
|
|
rcPrQosLocalPolicyGreenBytes Counter64,
|
|
rcPrQosLocalPolicyYellowPackets Counter64,
|
|
rcPrQosLocalPolicyYellowBytes Counter64,
|
|
rcPrQosLocalPolicyRedPackets Counter64,
|
|
rcPrQosLocalPolicyRedBytes Counter64,
|
|
rcPrQosLocalPolicyStatsClear TruthValue
|
|
}
|
|
|
|
rcPrQosLocalPolicyGpId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value of Global Policer ID corresponding to this
|
|
local policer."
|
|
::= { rcPrQosLocalPolicyEntry 1 }
|
|
|
|
rcPrQosLocalPolicyIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slot number of the VSP chassis on which
|
|
stats are collected. Valid slots are IO slots
|
|
which are in slots 3 to 12."
|
|
::= { rcPrQosLocalPolicyEntry 2 }
|
|
|
|
rcPrQosLocalPolicyPeakRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global Peak Rate in Kilobit/sec."
|
|
::= { rcPrQosLocalPolicyEntry 3 }
|
|
|
|
rcPrQosLocalPolicySvcRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global Policer Service Rate in Kilobit/sec."
|
|
::= { rcPrQosLocalPolicyEntry 4 }
|
|
|
|
rcPrQosLocalPolicyTotalPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global Policer Total Packets Count."
|
|
::= { rcPrQosLocalPolicyEntry 5 }
|
|
|
|
rcPrQosLocalPolicyTotalBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global Policer Total Bytes Count."
|
|
::= { rcPrQosLocalPolicyEntry 6 }
|
|
|
|
rcPrQosLocalPolicyBytesOverPeak OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global Policer Bytes over Peak Rate Count."
|
|
::= { rcPrQosLocalPolicyEntry 7 }
|
|
|
|
rcPrQosLocalPolicyBytesOverSvc OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global Policer Bytes over Service Rate Count."
|
|
::= { rcPrQosLocalPolicyEntry 8 }
|
|
|
|
rcPrQosLocalPolicyTotalPktsDropped OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of Global Policer Total Packets dropped
|
|
due to reasons other than policing, e.g. congestion."
|
|
::= { rcPrQosLocalPolicyEntry 9 }
|
|
|
|
rcPrQosLocalPolicyLaneMember OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The lane that this Gpid has a local policing
|
|
account on "
|
|
::= { rcPrQosLocalPolicyEntry 10 }
|
|
|
|
rcPrQosLocalPolicyGreenPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets received
|
|
that were below committed rate."
|
|
::= { rcPrQosLocalPolicyEntry 11 }
|
|
|
|
rcPrQosLocalPolicyGreenBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bytes received
|
|
that were below the committed rate."
|
|
::= { rcPrQosLocalPolicyEntry 12 }
|
|
|
|
rcPrQosLocalPolicyYellowPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets received
|
|
that were above the committed rate but
|
|
below the peak rate."
|
|
::= { rcPrQosLocalPolicyEntry 13 }
|
|
|
|
rcPrQosLocalPolicyYellowBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bytes received
|
|
that were above the committed rate but
|
|
below the peak rate."
|
|
::= { rcPrQosLocalPolicyEntry 14 }
|
|
|
|
rcPrQosLocalPolicyRedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets received
|
|
that were above the peak rate."
|
|
::= { rcPrQosLocalPolicyEntry 15 }
|
|
|
|
rcPrQosLocalPolicyRedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of bytes received
|
|
that were above the peak rate."
|
|
::= { rcPrQosLocalPolicyEntry 16 }
|
|
|
|
rcPrQosLocalPolicyStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear Qos Policy statistics."
|
|
::= { rcPrQosLocalPolicyEntry 17 }
|
|
|
|
|
|
|
|
-- Power Ranger Qos Egress Queue Template Table
|
|
rcPrQosTxQueueTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosTxQueueTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of egress queue templates. The number of
|
|
templates is given by rcPrQosTxQueueNumTemplates."
|
|
::= { rcPrQos 4 }
|
|
|
|
rcPrQosTxQueueTemplateEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosTxQueueTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular egress queue template. Queue is a set of
|
|
egress queues."
|
|
INDEX { rcPrQosTxQueueTemplateId }
|
|
::= { rcPrQosTxQueueTemplateTable 1 }
|
|
|
|
RcPrQosTxQueueTemplateEntry ::= SEQUENCE {
|
|
rcPrQosTxQueueTemplateId INTEGER,
|
|
rcPrQosTxQueueTemplateName DisplayString,
|
|
rcPrQosTxQueueTemplateMaxQueues INTEGER,
|
|
rcPrQosTxQueueTemplateBalancedQueues INTEGER,
|
|
rcPrQosTxQueueTemplateHiPriQueues INTEGER,
|
|
rcPrQosTxQueueTemplateLoPriQueues INTEGER,
|
|
rcPrQosTxQueueTemplateTotalQueues Integer32,
|
|
rcPrQosTxQueueTemplateBalancedQList OCTET STRING,
|
|
rcPrQosTxQueueTemplateHiPriQList OCTET STRING,
|
|
rcPrQosTxQueueTemplateLoPriQList OCTET STRING,
|
|
rcPrQosTxQueueTemplateTotalQLists OCTET STRING,
|
|
rcPrQosTxQueueTemplateMinRateTotal INTEGER,
|
|
rcPrQosTxQueueTemplateMaxRateHiPri INTEGER,
|
|
rcPrQosTxQueueTemplatePortMembers PortSet,
|
|
rcPrQosTxQueueTemplateFlags INTEGER,
|
|
rcPrQosTxQueueTemplateApply TruthValue,
|
|
rcPrQosTxQueueTemplateRowStatus RowStatus
|
|
}
|
|
|
|
rcPrQosTxQueueTemplateId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..386)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies Egress Queue
|
|
Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 1 }
|
|
|
|
rcPrQosTxQueueTemplateName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this egress
|
|
Queue Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 2 }
|
|
|
|
rcPrQosTxQueueTemplateMaxQueues OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eight(8),
|
|
sixtyfour(64)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Maximum number of queues in this Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 3 }
|
|
|
|
rcPrQosTxQueueTemplateBalancedQueues OBJECT-TYPE
|
|
SYNTAX INTEGER (0..48)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Total number of Balanced Queues in this Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 4 }
|
|
|
|
rcPrQosTxQueueTemplateHiPriQueues OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Total number of High Priority Queues in this
|
|
Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 5 }
|
|
|
|
rcPrQosTxQueueTemplateLoPriQueues OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Total number of Low Priority Queues in this Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 6 }
|
|
|
|
rcPrQosTxQueueTemplateTotalQueues OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of queues in this Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 7 }
|
|
|
|
rcPrQosTxQueueTemplateBalancedQList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..200))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of Balanced Queues in this Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 8 }
|
|
|
|
rcPrQosTxQueueTemplateHiPriQList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..200))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of High Priority Queues in this Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 9 }
|
|
|
|
rcPrQosTxQueueTemplateLoPriQList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..200))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of Low Priority Queues in this Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 10 }
|
|
|
|
rcPrQosTxQueueTemplateTotalQLists OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..600))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of Total Physical Queues in this Template."
|
|
::= { rcPrQosTxQueueTemplateEntry 11 }
|
|
|
|
rcPrQosTxQueueTemplateMinRateTotal OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sum of minimum rate guarantees for this template."
|
|
::= { rcPrQosTxQueueTemplateEntry 12 }
|
|
|
|
rcPrQosTxQueueTemplateMaxRateHiPri OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sum of maximum rate guarantees for high priority
|
|
queues of this template."
|
|
::= { rcPrQosTxQueueTemplateEntry 13 }
|
|
|
|
rcPrQosTxQueueTemplatePortMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port members of this template."
|
|
::= { rcPrQosTxQueueTemplateEntry 14 }
|
|
|
|
rcPrQosTxQueueTemplateFlags OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
created(1),
|
|
committed(2),
|
|
modified(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Bitset indicated template state."
|
|
DEFVAL { created }
|
|
::= { rcPrQosTxQueueTemplateEntry 15 }
|
|
|
|
rcPrQosTxQueueTemplateApply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When apply is issued by the administrator,
|
|
the Egress Queue Set attributes are committed."
|
|
DEFVAL { false }
|
|
::= { rcPrQosTxQueueTemplateEntry 16 }
|
|
|
|
rcPrQosTxQueueTemplateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrQosTxQueueTemplateEntry 17 }
|
|
|
|
-- Power Ranger Qos Egress Queue Table
|
|
rcPrQosTxQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosTxQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of elementary Egress queue entries."
|
|
::= { rcPrQos 5 }
|
|
|
|
rcPrQosTxQueueEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosTxQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular elementary egress queue."
|
|
INDEX { rcPrQosTxQueueTid,
|
|
rcPrQosTxQueueQid }
|
|
::= { rcPrQosTxQueueTable 1 }
|
|
|
|
RcPrQosTxQueueEntry ::= SEQUENCE {
|
|
rcPrQosTxQueueTid INTEGER,
|
|
rcPrQosTxQueueQid INTEGER,
|
|
rcPrQosTxQueueName DisplayString,
|
|
rcPrQosTxQueueStyle INTEGER,
|
|
rcPrQosTxQueueWeight Integer32,
|
|
rcPrQosTxQueueMaxRate Integer32,
|
|
rcPrQosTxQueueMinRate Integer32,
|
|
rcPrQosTxQueueBquantum Integer32,
|
|
rcPrQosTxQueueMaxLength Integer32,
|
|
rcPrQosTxQueueWredCurveSet INTEGER,
|
|
rcPrQosTxQueueRowStatus RowStatus
|
|
}
|
|
|
|
rcPrQosTxQueueTid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..386)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Template ID of the template this queue belongs to."
|
|
::= { rcPrQosTxQueueEntry 1 }
|
|
|
|
rcPrQosTxQueueQid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Queue Offset from the base queue for this port."
|
|
::= { rcPrQosTxQueueEntry 2 }
|
|
|
|
rcPrQosTxQueueName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An NNSC name for this egress queue. Allowed only
|
|
for 8 NNSC queues."
|
|
::= { rcPrQosTxQueueEntry 3 }
|
|
|
|
rcPrQosTxQueueStyle OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hipri(1),
|
|
balanced(2),
|
|
lopri(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Egress queue style."
|
|
::= { rcPrQosTxQueueEntry 4 }
|
|
|
|
rcPrQosTxQueueWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Egress queue weight.
|
|
Applicable for balanced queues and lo-pri queues only."
|
|
::= { rcPrQosTxQueueEntry 5 }
|
|
|
|
rcPrQosTxQueueMaxRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Egress queue maximum rate, Kbs"
|
|
::= { rcPrQosTxQueueEntry 6 }
|
|
|
|
rcPrQosTxQueueMinRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Egress queue minimun rate guarantee, Kbs.
|
|
Applicable for balanced queues and lo-pri queues only."
|
|
::= { rcPrQosTxQueueEntry 7 }
|
|
|
|
rcPrQosTxQueueBquantum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bandwidth allocation unit.
|
|
Applicable for balanced queues and lo-pri queues only."
|
|
::= { rcPrQosTxQueueEntry 8 }
|
|
|
|
rcPrQosTxQueueMaxLength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum queue length."
|
|
::= { rcPrQosTxQueueEntry 9 }
|
|
|
|
rcPrQosTxQueueWredCurveSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tailDrop(1),
|
|
lowDrop(2),
|
|
mediumDrop(3),
|
|
highDrop(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Random Early Detection Number."
|
|
DEFVAL { tailDrop }
|
|
::= { rcPrQosTxQueueEntry 10 }
|
|
|
|
rcPrQosTxQueueRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrQosTxQueueEntry 11 }
|
|
|
|
-- Power Ranger Qos Egress Queue Stats Table
|
|
rcPrQosTxQueueStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosTxQueueStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of elementary Egress queue stats entries."
|
|
::= { rcPrQos 6 }
|
|
|
|
rcPrQosTxQueueStatsEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosTxQueueStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing statistics information for a
|
|
particular elementary egress queue."
|
|
INDEX { rcPrQosTxQueueStatsPort,
|
|
rcPrQosTxQueueStatsQid }
|
|
::= { rcPrQosTxQueueStatsTable 1 }
|
|
|
|
RcPrQosTxQueueStatsEntry ::= SEQUENCE {
|
|
rcPrQosTxQueueStatsPort InterfaceIndex,
|
|
rcPrQosTxQueueStatsQid INTEGER,
|
|
rcPrQosTxQueueStatsTotalPages Counter64,
|
|
rcPrQosTxQueueStatsDroppedPages Counter64,
|
|
rcPrQosTxQueueStatsUtilization INTEGER
|
|
}
|
|
|
|
rcPrQosTxQueueStatsPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port index of the stats table."
|
|
::= { rcPrQosTxQueueStatsEntry 1 }
|
|
|
|
rcPrQosTxQueueStatsQid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Queue Offset from the base queue for this port."
|
|
::= { rcPrQosTxQueueStatsEntry 2 }
|
|
|
|
rcPrQosTxQueueStatsTotalPages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total pages offered to the queue."
|
|
::= { rcPrQosTxQueueStatsEntry 3 }
|
|
|
|
rcPrQosTxQueueStatsDroppedPages OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total pages dropped by the queue."
|
|
::= { rcPrQosTxQueueStatsEntry 4 }
|
|
|
|
rcPrQosTxQueueStatsUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Utilization percentage of the queue."
|
|
::= { rcPrQosTxQueueStatsEntry 5 }
|
|
|
|
-- Power Ranger Ingress Exp Bit To Qos Level Table
|
|
rcPrQosIngressExpToQosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosIngressExpToQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the Mpls EXP to
|
|
QOS (Exp bit->QOS) mapping on packet ingress."
|
|
::= { rcPrQos 7 }
|
|
|
|
rcPrQosIngressExpToQosEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosIngressExpToQosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Exp bit->Qos mapping"
|
|
INDEX { rcPrQosIngressExpToQosIndex }
|
|
::= { rcPrQosIngressExpToQosTable 1 }
|
|
|
|
RcPrQosIngressExpToQosEntry ::= SEQUENCE {
|
|
rcPrQosIngressExpToQosIndex INTEGER,
|
|
rcPrQosIngressExpToQosMplsExp INTEGER,
|
|
rcPrQosIngressExpToQosLevel INTEGER,
|
|
rcPrQosIngressExpToQosRowStatus RowStatus
|
|
}
|
|
|
|
rcPrQosIngressExpToQosIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rcPrQosIngressExpToQosEntry 1 }
|
|
|
|
rcPrQosIngressExpToQosMplsExp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Mpls Exp bit level."
|
|
::= { rcPrQosIngressExpToQosEntry 2 }
|
|
|
|
rcPrQosIngressExpToQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "qos level"
|
|
::= { rcPrQosIngressExpToQosEntry 3 }
|
|
|
|
rcPrQosIngressExpToQosRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrQosIngressExpToQosEntry 4}
|
|
|
|
|
|
-- Power Ranger Egress Qos Level to Exp Bit Table
|
|
rcPrQosEgressQosToExpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosEgressQosToExpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to specify the QOS to
|
|
Mpls EXP bit field (QOS->Exp bit) mapping on packet
|
|
egress."
|
|
::= { rcPrQos 8 }
|
|
|
|
rcPrQosEgressQosToExpEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosEgressQosToExpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of Qos->Exp bit mapping"
|
|
INDEX { rcPrQosEgressQosToExpIndex }
|
|
::= { rcPrQosEgressQosToExpTable 1 }
|
|
|
|
RcPrQosEgressQosToExpEntry ::= SEQUENCE {
|
|
rcPrQosEgressQosToExpIndex INTEGER,
|
|
rcPrQosEgressQosToExpQosLevel INTEGER,
|
|
rcPrQosEgressQosToExpMplsExp INTEGER,
|
|
rcPrQosEgressQosToExpRowStatus RowStatus
|
|
}
|
|
|
|
rcPrQosEgressQosToExpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to uniquely identify a row in this table."
|
|
::= { rcPrQosEgressQosToExpEntry 1 }
|
|
|
|
rcPrQosEgressQosToExpQosLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "qos level"
|
|
::= { rcPrQosEgressQosToExpEntry 2 }
|
|
|
|
rcPrQosEgressQosToExpMplsExp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Mpls EXP bit level."
|
|
::= { rcPrQosEgressQosToExpEntry 3 }
|
|
|
|
rcPrQosEgressQosToExpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrQosEgressQosToExpEntry 4}
|
|
|
|
--
|
|
-- POWER RANGER QOS SUBPORT QUEUE SET TABLE
|
|
--
|
|
|
|
rcPrQosSubportQueueSetTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosSubportQueueSetTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of elementary egress queue templates."
|
|
::= { rcPrQos 9 }
|
|
|
|
rcPrQosSubportQueueSetTemplateEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosSubportQueueSetTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for
|
|
a particular egress queue template. Queue is a
|
|
set of egress queues"
|
|
INDEX { rcPrQosSubportQueueSetTemplatePortIndex,
|
|
rcPrQosSubportQueueSetTemplateIndex }
|
|
::= { rcPrQosSubportQueueSetTemplateTable 1 }
|
|
|
|
RcPrQosSubportQueueSetTemplateEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcPrQosSubportQueueSetTemplatePortIndex INTEGER,
|
|
rcPrQosSubportQueueSetTemplateIndex INTEGER,
|
|
rcPrQosSubportQueueSetTemplatePort InterfaceIndex,
|
|
rcPrQosSubportQueueSetTemplateApply TruthValue,
|
|
rcPrQosSubportQueueSetTemplateSubportProfileName DisplayString,
|
|
rcPrQosSubportQueueSetTemplateAssignment DisplayString,
|
|
rcPrQosSubportQueueSetTemplateRowStatus RowStatus,
|
|
rcPrQosSubportQueueSetTemplateMinRate INTEGER,
|
|
rcPrQosSubportQueueSetTemplateMaxRate INTEGER,
|
|
rcPrQosSubportQueueSetTemplateMaxRateState EnableValue,
|
|
rcPrQosSubportQueueSetTemplateStatus INTEGER
|
|
}
|
|
|
|
rcPrQosSubportQueueSetTemplatePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Index."
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 1 }
|
|
|
|
rcPrQosSubportQueueSetTemplateIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..80)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A name assigned for this Subport Queue Set."
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 2 }
|
|
|
|
rcPrQosSubportQueueSetTemplatePort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Port assigned for this Subport Queue Set."
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 3 }
|
|
|
|
rcPrQosSubportQueueSetTemplateApply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "When apply is issued by the administrators,
|
|
the subport queue set attributes are committed."
|
|
DEFVAL { false }
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 4 }
|
|
|
|
rcPrQosSubportQueueSetTemplateSubportProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Name of the subport queue profile to be
|
|
applied for this template."
|
|
DEFVAL {"DFLT_SUBPORT_PROFILE"}
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 5 }
|
|
|
|
rcPrQosSubportQueueSetTemplateAssignment OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the trunk to this queue set is assigned."
|
|
DEFVAL {"Unassigned"}
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 6 }
|
|
|
|
rcPrQosSubportQueueSetTemplateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 7 }
|
|
|
|
rcPrQosSubportQueueSetTemplateMinRate OBJECT-TYPE
|
|
SYNTAX INTEGER (2000..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Minimum Rate. Minimum Rate of less than 10000 is
|
|
valid only on 48 Port RC Modules. On all other modules
|
|
the minimum value Min Rate can be configured is 10000."
|
|
DEFVAL { 50000 }
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 8 }
|
|
|
|
rcPrQosSubportQueueSetTemplateMaxRate OBJECT-TYPE
|
|
SYNTAX INTEGER (2000..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Maximum Rate. Maximum Rate of less than 10000 is
|
|
valid only on 48 Port RC Modules. On all other modules
|
|
the minimum value Max Rate can be configured is 10000."
|
|
DEFVAL { 1000000 }
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 9 }
|
|
|
|
rcPrQosSubportQueueSetTemplateMaxRateState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable the maximum rate."
|
|
DEFVAL { disable }
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 10 }
|
|
|
|
rcPrQosSubportQueueSetTemplateStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
created(1),
|
|
applied(2),
|
|
modified(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bitset indicating Subport Queue Set status."
|
|
DEFVAL { created }
|
|
::= { rcPrQosSubportQueueSetTemplateEntry 11 }
|
|
|
|
--
|
|
-- RATE LIMITER TABLE (FOR I-SID'S)
|
|
--
|
|
|
|
rcPrQosIsidRateLimitsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosIsidRateLimitsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Isid Rate Limits Tables are
|
|
for R-Module cards only"
|
|
::= { rcPrQos 10 }
|
|
|
|
rcPrQosIsidRateLimitsEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosIsidRateLimitsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Isid Rate Limits Table"
|
|
INDEX { rcPrQosIsidRateLimitsSlotNumber,
|
|
rcPrQosIsidRateLimitsLaneNumber }
|
|
::= { rcPrQosIsidRateLimitsTable 1 }
|
|
|
|
RcPrQosIsidRateLimitsEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcPrQosIsidRateLimitsSlotNumber INTEGER,
|
|
rcPrQosIsidRateLimitsLaneNumber INTEGER,
|
|
rcPrQosIsidRateLimitsAdminState EnableValue
|
|
}
|
|
|
|
rcPrQosIsidRateLimitsSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot number."
|
|
::= { rcPrQosIsidRateLimitsEntry 1 }
|
|
|
|
rcPrQosIsidRateLimitsLaneNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane number. On a 30 Port 1G card (8630GBR),
|
|
Ports 1 to 10 are grouped under Lane 1, Ports
|
|
11 to 20 are grouped under Lane 2 and Ports 21
|
|
to 30 are grouped under Lane 3. For a 3 Port
|
|
10G card (8683XLR), Port 1 comes under Lane 1,
|
|
Port 2 comes under Lane 2 and Port 3 comes
|
|
under Lane 3. For a 48 Port 1G card (8648GTR),
|
|
Ports 1 to 24 are grouped under Lane 1 and Ports
|
|
25 to 48 are grouped under Lane 2."
|
|
::= { rcPrQosIsidRateLimitsEntry 2 }
|
|
|
|
rcPrQosIsidRateLimitsAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Admin control for the Rate Limiter Table."
|
|
DEFVAL { disable }
|
|
::= { rcPrQosIsidRateLimitsEntry 3 }
|
|
|
|
--
|
|
-- RATE LIMITER I-SID TABLE
|
|
--
|
|
|
|
rcPrQosIsidRateLimitsIsidTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosIsidRateLimitsIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table contain rate limit for all Power Range card (R module).
|
|
Based on Slot and lane number and Isid ID"
|
|
::= { rcPrQos 11 }
|
|
|
|
rcPrQosIsidRateLimitsIsidEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosIsidRateLimitsIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry of Rate limit per slot and lane and Isid ID"
|
|
INDEX { rcPrQosIsidRateLimitsIsidSlotNumber,
|
|
rcPrQosIsidRateLimitsIsidLaneNumber,
|
|
rcPrQosIsidRateLimitsIsidIsidId }
|
|
::= { rcPrQosIsidRateLimitsIsidTable 1 }
|
|
|
|
RcPrQosIsidRateLimitsIsidEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcPrQosIsidRateLimitsIsidSlotNumber INTEGER,
|
|
rcPrQosIsidRateLimitsIsidLaneNumber INTEGER,
|
|
rcPrQosIsidRateLimitsIsidIsidId INTEGER,
|
|
rcPrQosIsidRateLimitsIsidRateLimit INTEGER
|
|
}
|
|
|
|
rcPrQosIsidRateLimitsIsidSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot number."
|
|
::= { rcPrQosIsidRateLimitsIsidEntry 1 }
|
|
|
|
rcPrQosIsidRateLimitsIsidLaneNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane number. On a 30 Port 1G card (8630GBR),
|
|
Ports 1 to 10 are grouped under Lane 1, Ports
|
|
11 to 20 are grouped under Lane 2 and Ports 21
|
|
to 30 are grouped under Lane 3. For a 3 Port
|
|
10G card (8683XLR), Port 1 comes under Lane 1,
|
|
Port 2 comes under Lane 2 and Port 3 comes
|
|
under Lane 3. For a 48 Port 1G card (8648GTR),
|
|
Ports 1 to 24 are grouped under Lane 1 and Ports
|
|
25 to 48 are grouped under Lane 2."
|
|
::= { rcPrQosIsidRateLimitsIsidEntry 2 }
|
|
|
|
rcPrQosIsidRateLimitsIsidIsidId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Isid Id."
|
|
::= { rcPrQosIsidRateLimitsIsidEntry 3 }
|
|
|
|
rcPrQosIsidRateLimitsIsidRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rate Limit in Mbps."
|
|
DEFVAL { 1 }
|
|
::= { rcPrQosIsidRateLimitsIsidEntry 4 }
|
|
--
|
|
-- SUBPORT PROFILE TABLE
|
|
--
|
|
|
|
rcPrQosSubportProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosSubportProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table contain Subport Queue Profile information"
|
|
::= { rcPrQos 12 }
|
|
|
|
rcPrQosSubportProfileEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosSubportProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Subport Queue Profile Table entry"
|
|
INDEX { rcPrQosSubportProfileIndex }
|
|
::= { rcPrQosSubportProfileTable 1 }
|
|
|
|
RcPrQosSubportProfileEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcPrQosSubportProfileIndex INTEGER,
|
|
rcPrQosSubportProfileName DisplayString,
|
|
rcPrQosSubportProfileBalancedQueues INTEGER,
|
|
rcPrQosSubportProfileHighPriQueues INTEGER,
|
|
rcPrQosSubportProfileLowPriQueues INTEGER,
|
|
rcPrQosSubportProfileBalancedQList OCTET STRING,
|
|
rcPrQosSubportProfileHighPriQList OCTET STRING,
|
|
rcPrQosSubportProfileLowPriQList OCTET STRING,
|
|
rcPrQosSubportProfileRowStatus RowStatus
|
|
}
|
|
|
|
rcPrQosSubportProfileIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Subport Queue Profile."
|
|
::= { rcPrQosSubportProfileEntry 1 }
|
|
|
|
rcPrQosSubportProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Subport Queue Profile table name to be used."
|
|
::= { rcPrQosSubportProfileEntry 2 }
|
|
|
|
rcPrQosSubportProfileBalancedQueues OBJECT-TYPE
|
|
SYNTAX INTEGER (0..6)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Total number of Balanced Queues in this profile."
|
|
DEFVAL { 5 }
|
|
::= { rcPrQosSubportProfileEntry 3 }
|
|
|
|
rcPrQosSubportProfileHighPriQueues OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Total number of High Priority Queues in this profile."
|
|
DEFVAL { 2 }
|
|
::= { rcPrQosSubportProfileEntry 4 }
|
|
|
|
rcPrQosSubportProfileLowPriQueues OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Total number of Low Priority Queues in this profile."
|
|
DEFVAL { 1 }
|
|
::= { rcPrQosSubportProfileEntry 5 }
|
|
|
|
rcPrQosSubportProfileBalancedQList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of Balanced Queues in this profile."
|
|
::= { rcPrQosSubportProfileEntry 6 }
|
|
|
|
rcPrQosSubportProfileHighPriQList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of High Priority Queues in this profile."
|
|
::= { rcPrQosSubportProfileEntry 7 }
|
|
|
|
rcPrQosSubportProfileLowPriQList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of Low Priority Queues in this profile."
|
|
::= { rcPrQosSubportProfileEntry 8 }
|
|
|
|
rcPrQosSubportProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrQosSubportProfileEntry 9 }
|
|
|
|
--
|
|
-- SUBPORT PROFILE QUEUE TABLE
|
|
--
|
|
rcPrQosSubportProfileQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosSubportProfileQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of elementary subport queue entries."
|
|
::= { rcPrQos 13 }
|
|
|
|
rcPrQosSubportProfileQueueEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosSubportProfileQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for
|
|
a particular subport egress queue."
|
|
INDEX { rcPrQosSubportProfileQueueProfileIndex,
|
|
rcPrQosSubportProfileQueueQIndex }
|
|
::= { rcPrQosSubportProfileQueueTable 1 }
|
|
|
|
RcPrQosSubportProfileQueueEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcPrQosSubportProfileQueueProfileIndex INTEGER,
|
|
rcPrQosSubportProfileQueueQIndex INTEGER,
|
|
rcPrQosSubportProfileQueueQStyle INTEGER,
|
|
rcPrQosSubportProfileQueueMaxRate INTEGER,
|
|
rcPrQosSubportProfileQueueMinRate INTEGER,
|
|
rcPrQosSubportProfileQueueMaxLength INTEGER,
|
|
rcPrQosSubportProfileQueueWredCurveSet INTEGER,
|
|
rcPrQosSubportProfileQueueQPriority INTEGER
|
|
}
|
|
|
|
rcPrQosSubportProfileQueueProfileIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Profile index of the profie this queue belongs to."
|
|
::= { rcPrQosSubportProfileQueueEntry 1 }
|
|
|
|
rcPrQosSubportProfileQueueQIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Queue offset from the base queue."
|
|
::= { rcPrQosSubportProfileQueueEntry 2 }
|
|
|
|
rcPrQosSubportProfileQueueQStyle OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
highPri(1),
|
|
balanced(2),
|
|
lowPri(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Queue style."
|
|
::= { rcPrQosSubportProfileQueueEntry 3 }
|
|
|
|
rcPrQosSubportProfileQueueMaxRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Queue maximum rate in percentage."
|
|
::= { rcPrQosSubportProfileQueueEntry 4 }
|
|
|
|
rcPrQosSubportProfileQueueMinRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Queue minimum rate in percentage."
|
|
::= { rcPrQosSubportProfileQueueEntry 5 }
|
|
|
|
rcPrQosSubportProfileQueueMaxLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum queue length."
|
|
::= { rcPrQosSubportProfileQueueEntry 6 }
|
|
|
|
rcPrQosSubportProfileQueueWredCurveSet OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
tailDrop(1),
|
|
lowDrop(2),
|
|
mediumDrop(3),
|
|
highDrop(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Weighted Random Early Detection setting."
|
|
DEFVAL { tailDrop }
|
|
::= { rcPrQosSubportProfileQueueEntry 7 }
|
|
|
|
rcPrQosSubportProfileQueueQPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Q Priority."
|
|
::= { rcPrQosSubportProfileQueueEntry 8 }
|
|
|
|
--
|
|
-- SUBPORT QUEUE SET - INTERNAL QOS TO EGRESS QUEUE MAPPING TABLE
|
|
--
|
|
|
|
rcPrQosSubportQueueSetEqmapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosSubportQueueSetEqmapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Internal QoS to Egress Queue mapping table."
|
|
::= { rcPrQos 14 }
|
|
|
|
rcPrQosSubportQueueSetEqmapEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosSubportQueueSetEqmapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing egress queue id for an
|
|
internal QoS level on a subport q set."
|
|
INDEX { rcPrQosSubportQueueSetEqmapPortIndex,
|
|
rcPrQosSubportQueueSetEqmapIndex,
|
|
rcPrQosSubportQueueSetEqmapInternalQos }
|
|
::= { rcPrQosSubportQueueSetEqmapTable 1 }
|
|
|
|
RcPrQosSubportQueueSetEqmapEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcPrQosSubportQueueSetEqmapPortIndex INTEGER,
|
|
rcPrQosSubportQueueSetEqmapIndex INTEGER,
|
|
rcPrQosSubportQueueSetEqmapInternalQos INTEGER,
|
|
rcPrQosSubportQueueSetEqmapPort InterfaceIndex,
|
|
rcPrQosSubportQueueSetEqmapEgressQueue INTEGER
|
|
}
|
|
|
|
rcPrQosSubportQueueSetEqmapPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Index."
|
|
::= { rcPrQosSubportQueueSetEqmapEntry 1 }
|
|
|
|
rcPrQosSubportQueueSetEqmapIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..80)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Subport Queue Set Index."
|
|
::= { rcPrQosSubportQueueSetEqmapEntry 2 }
|
|
|
|
rcPrQosSubportQueueSetEqmapInternalQos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Internal QoS."
|
|
::= { rcPrQosSubportQueueSetEqmapEntry 3 }
|
|
|
|
rcPrQosSubportQueueSetEqmapPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port assigned for this Subport Queue Set."
|
|
::= { rcPrQosSubportQueueSetEqmapEntry 4 }
|
|
|
|
rcPrQosSubportQueueSetEqmapEgressQueue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Egress Queue Id assigned for the
|
|
specified Internal QoS Lvl."
|
|
::= { rcPrQosSubportQueueSetEqmapEntry 5 }
|
|
|
|
-- Power Ranger Egress Qos Cos Queue stats Table
|
|
rcPrQosCosQuePortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosCosQuePortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to get the qos cos queue port stats."
|
|
::= { rcPrQos 15 }
|
|
|
|
rcPrQosCosQuePortStatsEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosCosQuePortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of port Qos cosq stats"
|
|
INDEX { rcPrQosCosQuePortStatsIndex }
|
|
::= { rcPrQosCosQuePortStatsTable 1 }
|
|
|
|
RcPrQosCosQuePortStatsEntry ::= SEQUENCE {
|
|
rcPrQosCosQuePortStatsIndex INTEGER,
|
|
rcPrQosCosQuePortStatsQue0OutPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue0OutBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue0DropPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue0DropBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue1OutPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue1OutBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue1DropPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue1DropBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue2OutPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue2OutBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue2DropPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue2DropBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue3OutPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue3OutBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue3DropPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue3DropBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue4OutPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue4OutBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue4DropPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue4DropBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue5OutPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue5OutBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue5DropPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue5DropBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue6OutPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue6OutBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue6DropPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue6DropBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue7OutPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue7OutBytes Counter64,
|
|
rcPrQosCosQuePortStatsQue7DropPackets Counter64,
|
|
rcPrQosCosQuePortStatsQue7DropBytes Counter64,
|
|
rcPrQosCosQuePortStatsClearStat TruthValue
|
|
}
|
|
rcPrQosCosQuePortStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (192..297)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the loopback port number from 192(1/1) to 297(2/42)."
|
|
::= { rcPrQosCosQuePortStatsEntry 1 }
|
|
|
|
rcPrQosCosQuePortStatsQue0OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 0."
|
|
::= { rcPrQosCosQuePortStatsEntry 2 }
|
|
|
|
rcPrQosCosQuePortStatsQue0OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 0."
|
|
::= { rcPrQosCosQuePortStatsEntry 3 }
|
|
|
|
rcPrQosCosQuePortStatsQue0DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 0."
|
|
::= { rcPrQosCosQuePortStatsEntry 4 }
|
|
|
|
rcPrQosCosQuePortStatsQue0DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 0."
|
|
::= { rcPrQosCosQuePortStatsEntry 5 }
|
|
|
|
rcPrQosCosQuePortStatsQue1OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 1."
|
|
::= { rcPrQosCosQuePortStatsEntry 6 }
|
|
|
|
rcPrQosCosQuePortStatsQue1OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 1."
|
|
::= { rcPrQosCosQuePortStatsEntry 7 }
|
|
|
|
rcPrQosCosQuePortStatsQue1DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 1."
|
|
::= { rcPrQosCosQuePortStatsEntry 8 }
|
|
|
|
rcPrQosCosQuePortStatsQue1DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 1."
|
|
::= { rcPrQosCosQuePortStatsEntry 9 }
|
|
|
|
rcPrQosCosQuePortStatsQue2OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 2."
|
|
::= { rcPrQosCosQuePortStatsEntry 10 }
|
|
|
|
rcPrQosCosQuePortStatsQue2OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 2."
|
|
::= { rcPrQosCosQuePortStatsEntry 11 }
|
|
|
|
rcPrQosCosQuePortStatsQue2DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 2."
|
|
::= { rcPrQosCosQuePortStatsEntry 12 }
|
|
|
|
rcPrQosCosQuePortStatsQue2DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 2."
|
|
::= { rcPrQosCosQuePortStatsEntry 13 }
|
|
|
|
rcPrQosCosQuePortStatsQue3OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 3."
|
|
::= { rcPrQosCosQuePortStatsEntry 14 }
|
|
|
|
rcPrQosCosQuePortStatsQue3OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 3."
|
|
::= { rcPrQosCosQuePortStatsEntry 15 }
|
|
|
|
rcPrQosCosQuePortStatsQue3DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 3."
|
|
::= { rcPrQosCosQuePortStatsEntry 16 }
|
|
|
|
rcPrQosCosQuePortStatsQue3DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 3."
|
|
::= { rcPrQosCosQuePortStatsEntry 17 }
|
|
|
|
rcPrQosCosQuePortStatsQue4OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 4."
|
|
::= { rcPrQosCosQuePortStatsEntry 18 }
|
|
|
|
rcPrQosCosQuePortStatsQue4OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 4."
|
|
::= { rcPrQosCosQuePortStatsEntry 19 }
|
|
|
|
rcPrQosCosQuePortStatsQue4DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 4."
|
|
::= { rcPrQosCosQuePortStatsEntry 20 }
|
|
|
|
rcPrQosCosQuePortStatsQue4DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 4."
|
|
::= { rcPrQosCosQuePortStatsEntry 21 }
|
|
|
|
rcPrQosCosQuePortStatsQue5OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 5."
|
|
::= { rcPrQosCosQuePortStatsEntry 22 }
|
|
|
|
rcPrQosCosQuePortStatsQue5OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 5."
|
|
::= { rcPrQosCosQuePortStatsEntry 23 }
|
|
|
|
rcPrQosCosQuePortStatsQue5DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 5."
|
|
::= { rcPrQosCosQuePortStatsEntry 24 }
|
|
|
|
rcPrQosCosQuePortStatsQue5DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 5."
|
|
::= { rcPrQosCosQuePortStatsEntry 25 }
|
|
|
|
rcPrQosCosQuePortStatsQue6OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 6."
|
|
::= { rcPrQosCosQuePortStatsEntry 26 }
|
|
|
|
rcPrQosCosQuePortStatsQue6OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 6."
|
|
::= { rcPrQosCosQuePortStatsEntry 27 }
|
|
|
|
rcPrQosCosQuePortStatsQue6DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 6."
|
|
::= { rcPrQosCosQuePortStatsEntry 28 }
|
|
|
|
rcPrQosCosQuePortStatsQue6DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 6."
|
|
::= { rcPrQosCosQuePortStatsEntry 29 }
|
|
|
|
rcPrQosCosQuePortStatsQue7OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 7."
|
|
::= { rcPrQosCosQuePortStatsEntry 30 }
|
|
|
|
rcPrQosCosQuePortStatsQue7OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 7."
|
|
::= { rcPrQosCosQuePortStatsEntry 31 }
|
|
|
|
rcPrQosCosQuePortStatsQue7DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 7."
|
|
::= { rcPrQosCosQuePortStatsEntry 32 }
|
|
|
|
rcPrQosCosQuePortStatsQue7DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 7."
|
|
::= { rcPrQosCosQuePortStatsEntry 33 }
|
|
|
|
rcPrQosCosQuePortStatsClearStat OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear Stats."
|
|
::= { rcPrQosCosQuePortStatsEntry 34 }
|
|
|
|
|
|
rcPrQosCosQueLoopbackPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosCosQueLoopbackPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to get the qos cos queue port stats."
|
|
::= { rcPrQos 16 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosCosQueLoopbackPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of port Qos cosq stats"
|
|
INDEX { rcPrQosCosQueLoopbackPortStatsIndex }
|
|
::= { rcPrQosCosQueLoopbackPortStatsTable 1 }
|
|
|
|
RcPrQosCosQueLoopbackPortStatsEntry ::= SEQUENCE {
|
|
rcPrQosCosQueLoopbackPortStatsIndex INTEGER,
|
|
rcPrQosCosQueLoopbackPortStatsQue0OutPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue0OutBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue0DropPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue0DropBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue1OutPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue1OutBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue1DropPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue1DropBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue2OutPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue2OutBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue2DropPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue2DropBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue3OutPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue3OutBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue3DropPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue3DropBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue4OutPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue4OutBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue4DropPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue4DropBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue5OutPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue5OutBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue5DropPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue5DropBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue6OutPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue6OutBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue6DropPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue6DropBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue7OutPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue7OutBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue7DropPackets Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsQue7DropBytes Counter64,
|
|
rcPrQosCosQueLoopbackPortStatsClearStat TruthValue
|
|
}
|
|
rcPrQosCosQueLoopbackPortStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the port number from 1 to 2."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 1 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue0OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 0."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 2 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue0OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 0."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 3 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue0DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 0."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 4 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue0DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 0."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 5 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue1OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 1."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 6 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue1OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 1."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 7 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue1DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 1."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 8 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue1DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 1."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 9 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue2OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 2."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 10 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue2OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 2."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 11 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue2DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 2."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 12 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue2DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 2."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 13 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue3OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 3."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 14 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue3OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 3."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 15 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue3DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 3."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 16 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue3DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 3."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 17 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue4OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 4."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 18 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue4OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 4."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 19 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue4DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 4."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 20 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue4DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 4."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 21 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue5OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 5."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 22 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue5OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 5."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 23 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue5DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 5."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 24 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue5DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 5."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 25 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue6OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 6."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 26 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue6OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 6."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 27 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue6DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 6."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 28 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue6DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 6."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 29 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue7OutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for Cos queue 7."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 30 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue7OutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for Cos queue 7."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 31 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue7DropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for Cos queue 7."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 32 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsQue7DropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for Cos queue 7."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 33 }
|
|
|
|
rcPrQosCosQueLoopbackPortStatsClearStat OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear stats."
|
|
::= { rcPrQosCosQueLoopbackPortStatsEntry 34 }
|
|
|
|
rcPrQosCosQueCppPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrQosCosQueCppPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is used to get the qos cos queue port stats."
|
|
::= { rcPrQos 17 }
|
|
|
|
rcPrQosCosQueCppPortStatsEntry OBJECT-TYPE
|
|
SYNTAX RcPrQosCosQueCppPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information of port Qos cosq stats"
|
|
INDEX { rcPrQosCosQueCppPortStatsIndex }
|
|
::= { rcPrQosCosQueCppPortStatsTable 1 }
|
|
|
|
RcPrQosCosQueCppPortStatsEntry ::= SEQUENCE {
|
|
rcPrQosCosQueCppPortStatsIndex INTEGER,
|
|
rcPrQosCosQueCppPortStatsOutPackets Counter64,
|
|
rcPrQosCosQueCppPortStatsOutBytes Counter64,
|
|
rcPrQosCosQueCppPortStatsDropPackets Counter64,
|
|
rcPrQosCosQueCppPortStatsDropBytes Counter64
|
|
}
|
|
|
|
rcPrQosCosQueCppPortStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the cos queue number from 0 to 15."
|
|
::= { rcPrQosCosQueCppPortStatsEntry 1 }
|
|
|
|
rcPrQosCosQueCppPortStatsOutPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out packets for cpp port."
|
|
::= { rcPrQosCosQueCppPortStatsEntry 2 }
|
|
|
|
rcPrQosCosQueCppPortStatsOutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the out bytes for cpp port."
|
|
::= { rcPrQosCosQueCppPortStatsEntry 3 }
|
|
|
|
rcPrQosCosQueCppPortStatsDropPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop packets for cpp port."
|
|
::= { rcPrQosCosQueCppPortStatsEntry 4 }
|
|
|
|
rcPrQosCosQueCppPortStatsDropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the drop bytes for cpp port."
|
|
::= { rcPrQosCosQueCppPortStatsEntry 5 }
|
|
|
|
rcPrQosCosQue OBJECT IDENTIFIER ::= { rcPrQos 18 }
|
|
|
|
rcPrQosCosQueCpuStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear cpu qos cos queue statistics."
|
|
::= {rcPrQosCosQue 1 }
|
|
|
|
--
|
|
-- The rcPrFilter group
|
|
--
|
|
|
|
rcPrFilterScalars OBJECT IDENTIFIER ::= { rcPrFilter 1 }
|
|
|
|
rcPrFilterActTableSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Act entries in the
|
|
rcPrFilterActTable. Default table size is 0 until the
|
|
administrator configures any Act entries."
|
|
::= { rcPrFilterScalars 1 }
|
|
|
|
rcPrFilterAclTableSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Acl entries
|
|
in the rcPrFilterAclTable. Default table size is 0
|
|
until the administrator configures any Acl entries."
|
|
::= { rcPrFilterScalars 2 }
|
|
|
|
rcPrFilterAceTableSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16384)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Ace entries in the
|
|
rcPrFilterAceTable. Default table size is 0 until the
|
|
administrator configures any Ace entries. The maximum
|
|
size is # of Acls multiplied by # of Aces."
|
|
::= { rcPrFilterScalars 3 }
|
|
|
|
rcPrFilterAclBufferWrap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to enable or disable buffer wrapping for
|
|
filters log."
|
|
::= { rcPrFilterScalars 4 }
|
|
|
|
rcPrFilterAclClearLog OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to clear the filter Logs collected."
|
|
::= { rcPrFilterScalars 5 }
|
|
|
|
--
|
|
-- Power Ranger (PR) Acl MIB specification
|
|
--
|
|
-- o The Access Control List (Acl) mib defines management objects for
|
|
-- configuration information of the hardware-assisted filtering feature.
|
|
--
|
|
-- o Acl is a group of filtering rules organized in an ordered list.
|
|
--
|
|
-- o A filtering rule in the Acl is called an Access Control Entry (Ace).
|
|
--
|
|
-- o Max of 2k ACLs.
|
|
-- Each ACL can have a maximum of 2k ACEs. Ports are assigned
|
|
-- from 1-500 and VLANs are assigned from 501-1000.
|
|
--
|
|
-- o Max of 10k ACEs; each ACE belongs to a single ACL. Precedence
|
|
-- is determined by the Ace-Id (lower Ace-Id means higher precedence).
|
|
--
|
|
|
|
rcPrFilterAct OBJECT IDENTIFIER ::= { rcPrFilter 2 }
|
|
|
|
-- ACT Table
|
|
|
|
rcPrFilterActTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterActEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Acts to store information of each Act
|
|
entry. This table is indexed by the Act Id."
|
|
::= { rcPrFilterAct 1 }
|
|
|
|
rcPrFilterActEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterActEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Act Entry holding Act information."
|
|
INDEX { rcPrFilterActId }
|
|
::= { rcPrFilterActTable 1 }
|
|
|
|
RcPrFilterActEntry ::= SEQUENCE {
|
|
rcPrFilterActId INTEGER,
|
|
rcPrFilterActName DisplayString,
|
|
rcPrFilterActArpAttrs INTEGER,
|
|
rcPrFilterActEthernetAttrs INTEGER,
|
|
rcPrFilterActIpAttrs INTEGER,
|
|
rcPrFilterActProtocolAttrs INTEGER,
|
|
rcPrFilterActApply TruthValue,
|
|
rcPrFilterActRowStatus RowStatus,
|
|
rcPrFilterActIpv6Attrs INTEGER
|
|
}
|
|
|
|
rcPrFilterActId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A table of Acts to store information of each
|
|
Act. This table is indexed by the Act Id."
|
|
::= { rcPrFilterActEntry 1 }
|
|
|
|
rcPrFilterActName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator
|
|
for the Act Entry."
|
|
::= { rcPrFilterActEntry 2 }
|
|
|
|
rcPrFilterActArpAttrs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value is one or multiple (logical 'OR' of the
|
|
following):
|
|
none(0),
|
|
operation(1)
|
|
none: No Arp Attrs are selected or to clear
|
|
other choices.
|
|
operation: Only valid option for Arp attributes."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterActEntry 3 }
|
|
|
|
rcPrFilterActEthernetAttrs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value is one or multiple of the following:
|
|
none(0),
|
|
srcMac(1),
|
|
dstMac(2),
|
|
etherType(4),
|
|
port(8),
|
|
vlan(16),
|
|
vlanTagPrio(32)
|
|
none: If selected then unselect all other selections."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterActEntry 4 }
|
|
|
|
rcPrFilterActIpAttrs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value is one or multiple of the following:
|
|
none(0),
|
|
srcIp(1),
|
|
dstIp(2),
|
|
ipFragFlag(4),
|
|
ipOptions(8),
|
|
ipProtoType(16),
|
|
dscp(32)
|
|
none: If selected then unselect all other selections."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterActEntry 5 }
|
|
|
|
rcPrFilterActProtocolAttrs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value is one or multiple of the following:
|
|
none(0),
|
|
tcpSrcPort(1),
|
|
udpSrcPort(2),
|
|
tcpDstPort(4),
|
|
udpDstPort(8),
|
|
tcpFlags(16),
|
|
icmpMsgType(32),
|
|
icmpv6MsgType(64)
|
|
none: If selected then unselect all other selections."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterActEntry 6 }
|
|
|
|
rcPrFilterActApply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When apply is issued by the administrator,
|
|
the ACT attributes cannot be modified."
|
|
DEFVAL { false }
|
|
::= { rcPrFilterActEntry 7 }
|
|
|
|
rcPrFilterActRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry. The
|
|
entry cannot be modified or deleted while there
|
|
are Acls configured with this Act entry."
|
|
::= { rcPrFilterActEntry 8}
|
|
|
|
rcPrFilterActIpv6Attrs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value is one or multiple of the following:
|
|
none(0),
|
|
srcIpv6(1),
|
|
dstIpv6(4),
|
|
nextHdr(16),
|
|
none: If selected then unselect all other selections."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterActEntry 9 }
|
|
|
|
-- Act Pattern Table to store the template
|
|
|
|
rcPrFilterActPatternTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterActPatternEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of user-defined parameters of Acls to
|
|
store information of each Acl. This table is indexed
|
|
by the Act Id and PatternIndex."
|
|
::= { rcPrFilterAct 2 }
|
|
|
|
rcPrFilterActPatternEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterActPatternEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing Configuration information for a
|
|
particular Act."
|
|
INDEX { rcPrFilterActPatternActId,
|
|
rcPrFilterActPatternIndex }
|
|
::= { rcPrFilterActPatternTable 1 }
|
|
|
|
RcPrFilterActPatternEntry ::= SEQUENCE {
|
|
rcPrFilterActPatternActId INTEGER,
|
|
rcPrFilterActPatternIndex INTEGER,
|
|
rcPrFilterActPatternName DisplayString,
|
|
rcPrFilterActPatternBase INTEGER,
|
|
rcPrFilterActPatternOffset INTEGER,
|
|
rcPrFilterActPatternLength INTEGER,
|
|
rcPrFilterActPatternRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterActPatternActId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the ActPatternEntry, a unique
|
|
identifier for Act entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterActPatternEntry 1 }
|
|
|
|
rcPrFilterActPatternIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indexes each user defined field pattern in an
|
|
Acl entry. In this release only 3 patterns are
|
|
allowed per ACT but we can have multiple
|
|
patterns per ACL."
|
|
::= { rcPrFilterActPatternEntry 2 }
|
|
|
|
rcPrFilterActPatternName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator for
|
|
the Acl Pattern Entry."
|
|
::= { rcPrFilterActPatternEntry 3 }
|
|
|
|
rcPrFilterActPatternBase OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
etherBegin(1),
|
|
macDstBegin(2),
|
|
macSrcBegin(3),
|
|
ethTypeLenBegin(4),
|
|
arpBegin(5),
|
|
ipHdrBegin(6),
|
|
ipOptionsBegin(7),
|
|
ipPayloadBegin(8),
|
|
ipTosBegin(9),
|
|
ipProtoBegin(10),
|
|
ipSrcBegin(11),
|
|
ipDstBegin(12),
|
|
tcpBegin(13),
|
|
tcpSrcportBegin(14),
|
|
tcpDstportBegin(15),
|
|
tcpFlagsEnd(16),
|
|
udpBegin(17),
|
|
udpSrcportBegin(18),
|
|
udpDstportBegin(19),
|
|
etherEnd(20),
|
|
ipHdrEnd(21),
|
|
icmpMsgBegin(22),
|
|
tcpEnd(23),
|
|
udpEnd(24),
|
|
ipv6HdrBegin(25)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User defined fields from headers to be used in
|
|
the Aces of the Acl."
|
|
DEFVAL { none }
|
|
::= { rcPrFilterActPatternEntry 4 }
|
|
|
|
rcPrFilterActPatternOffset OBJECT-TYPE -- MA/DZ to confirm maximum
|
|
SYNTAX INTEGER (0..25)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set Offset in bytes to the beginning offset of the user
|
|
defined field with selected header option as base."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterActPatternEntry 5 }
|
|
|
|
rcPrFilterActPatternLength OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of bytes to extract beginning from the
|
|
offset is set in rcPrFilterActPatternLength.
|
|
Only 1-15 are valid."
|
|
DEFVAL { 1 }
|
|
::= { rcPrFilterActPatternEntry 6 }
|
|
|
|
rcPrFilterActPatternRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterActPatternEntry 7 }
|
|
|
|
rcPrFilterAcl OBJECT IDENTIFIER ::= { rcPrFilter 3 }
|
|
|
|
-- ACL Table
|
|
|
|
rcPrFilterAclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Acls to store information of each Acl.
|
|
This table is indexed by the Acl Id."
|
|
::= { rcPrFilterAcl 1 }
|
|
|
|
rcPrFilterAclEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing Configuration information for
|
|
a particular Acl."
|
|
INDEX { rcPrFilterAclId }
|
|
::= { rcPrFilterAclTable 1 }
|
|
|
|
RcPrFilterAclEntry ::= SEQUENCE {
|
|
rcPrFilterAclId INTEGER,
|
|
rcPrFilterAclActId INTEGER,
|
|
rcPrFilterAclName DisplayString,
|
|
rcPrFilterAclType INTEGER,
|
|
rcPrFilterAclAceListSize INTEGER,
|
|
rcPrFilterAclDefaultAction INTEGER,
|
|
rcPrFilterAclGlobalAction INTEGER,
|
|
rcPrFilterAclState EnableValue,
|
|
rcPrFilterAclVlanList IdList,
|
|
rcPrFilterAclPortList PortSet,
|
|
rcPrFilterAclRowStatus RowStatus,
|
|
rcPrFilterAclNumVlanIds INTEGER,
|
|
rcPrFilterAclPktType INTEGER,
|
|
rcPrFilterAclControlPktRule INTEGER,
|
|
rcPrFilterAclVlanId Integer32,
|
|
rcPrFilterAclMltId Integer32,
|
|
rcPrFilterAclDstPortList PortSet,
|
|
rcPrFilterAclIpfixState EnableValue
|
|
}
|
|
|
|
rcPrFilterAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A unique identifier for Acl entry in the range
|
|
of Table Size."
|
|
::= { rcPrFilterAclEntry 1 }
|
|
|
|
rcPrFilterAclActId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A unique identifier for Act entry in the range
|
|
of Table Size."
|
|
::= { rcPrFilterAclEntry 2 }
|
|
|
|
rcPrFilterAclName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator for
|
|
the Acl Entry."
|
|
::= { rcPrFilterAclEntry 3 }
|
|
|
|
rcPrFilterAclType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inVlan(1),
|
|
outVlan(2),
|
|
inPort(3),
|
|
outPort(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An Acl can be vlan-based or port-based. An Ace
|
|
has a capability to match packets classified as
|
|
'ingress' and 'egress'. An ingress packet is
|
|
assigned a value 'in' and an egress packet is
|
|
assigned a value 'out'."
|
|
::= { rcPrFilterAclEntry 4 }
|
|
|
|
rcPrFilterAclAceListSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the number of Aces in a particular Acl."
|
|
::= { rcPrFilterAclEntry 5 }
|
|
|
|
rcPrFilterAclDefaultAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deny(1),
|
|
permit(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates action to be taken when none of the
|
|
Aces in the Acl match."
|
|
DEFVAL { permit }
|
|
::= { rcPrFilterAclEntry 6 }
|
|
|
|
rcPrFilterAclGlobalAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
mirror(2),
|
|
count(3),
|
|
mirror-count (4),
|
|
ipfix(5),
|
|
mirror-ipfix(6),
|
|
count-ipfix(7),
|
|
mirror-count-ipfix(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates action is applied to all Aces that
|
|
match in an Acl."
|
|
DEFVAL { none }
|
|
::= { rcPrFilterAclEntry 7 }
|
|
|
|
rcPrFilterAclState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables/Disables the state of all Aces in the Acl"
|
|
DEFVAL { enable }
|
|
::= { rcPrFilterAclEntry 8 }
|
|
|
|
rcPrFilterAclVlanList OBJECT-TYPE
|
|
SYNTAX IdList(SIZE(0..4096))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An array used to indicate all the VLANs to be
|
|
associated with this Acl Entry. At present, only 4k
|
|
Vlans are supported."
|
|
::= { rcPrFilterAclEntry 9 }
|
|
|
|
rcPrFilterAclPortList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the ports to be added to this Acl Entry."
|
|
::= { rcPrFilterAclEntry 10 }
|
|
|
|
rcPrFilterAclRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for the entry. Deleting
|
|
a non-empty Acl results in deletion of member Aces
|
|
and then the Acl."
|
|
::= { rcPrFilterAclEntry 11 }
|
|
|
|
rcPrFilterAclNumVlanIds OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to Indicate the number of VLAN ID's that
|
|
are stored in the rcPrFilterAclVlanList."
|
|
::= { rcPrFilterAclEntry 12 }
|
|
|
|
rcPrFilterAclPktType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4(1),
|
|
ipv6(2),
|
|
nonipv6(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the packet type that this ACL is
|
|
applicable to."
|
|
DEFVAL { nonipv6 }
|
|
::= { rcPrFilterAclEntry 13 }
|
|
|
|
rcPrFilterAclControlPktRule OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deny(1),
|
|
permit(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When the rcPrFilterAclDefaultAction object is set
|
|
to deny then control packets follow this rule.
|
|
Otherwise, the object value can be ignored."
|
|
DEFVAL { permit }
|
|
::= { rcPrFilterAclEntry 14 }
|
|
|
|
rcPrFilterAclVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination Vlan Id for mirroring the packets.
|
|
The value 0 means no vlan is being mirrored.
|
|
When the value of rcPrFilterAclVlanId is non-zero,
|
|
the values of rcPrFilterAclMltId and
|
|
rcPrFilterAclDstPortList must be 0."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterAclEntry 15 }
|
|
|
|
rcPrFilterAclMltId OBJECT-TYPE
|
|
SYNTAX Integer32(0..512)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination Mlt Id for mirroring the packets.
|
|
The value 0 means no mlt is being mirrored.
|
|
When the value of rcPrFilterAclMltId is non-zero,
|
|
the values of rcPrFilterAclVlanId and
|
|
rcPrFilterAclDstPortList must be 0."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterAclEntry 16 }
|
|
|
|
rcPrFilterAclDstPortList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination Port List for mirroring the packets.
|
|
The value 0 means no port(s) is being mirrored.
|
|
When the value of rcPrFilterAclDstPortList is non-zero,
|
|
the values of rcPrFilterAclVlanId and
|
|
rcPrFilterAclMltId must be 0."
|
|
::= { rcPrFilterAclEntry 17 }
|
|
|
|
rcPrFilterAclIpfixState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value indicating whether ipfix option on the
|
|
Acl is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcPrFilterAclEntry 18 }
|
|
|
|
-- Acl Stats Table
|
|
|
|
rcPrFilterAclStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAclStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Acls Statistics entries to store the
|
|
Default Acl statistics for each Acl.
|
|
This table is indexed by the Acl Id."
|
|
::= { rcPrFilterAcl 2 }
|
|
|
|
rcPrFilterAclStatsEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAclStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing default statistics information for
|
|
a particular Acl."
|
|
INDEX { rcPrFilterAclStatsAclId }
|
|
::= { rcPrFilterAclStatsTable 1 }
|
|
|
|
RcPrFilterAclStatsEntry ::= SEQUENCE {
|
|
rcPrFilterAclStatsAclId INTEGER,
|
|
rcPrFilterAclStatsMatchDefaultCounterPkts Counter64,
|
|
rcPrFilterAclStatsMatchDefaultOctets Counter64,
|
|
rcPrFilterAclStatsClear TruthValue,
|
|
rcPrFilterAclStatsMatchDefaultSecurityPkts Counter64,
|
|
rcPrFilterAclStatsMatchDefaultSecurityOctets Counter64,
|
|
rcPrFilterAclStatsMatchDefaultQosPkts Counter64,
|
|
rcPrFilterAclStatsMatchDefaultQosOctets Counter64,
|
|
rcPrFilterAclStatsMatchGlobalSecurityPkts Counter64,
|
|
rcPrFilterAclStatsMatchGlobalSecurityOctets Counter64,
|
|
rcPrFilterAclStatsMatchGlobalQosPkts Counter64,
|
|
rcPrFilterAclStatsMatchGlobalQosOctets Counter64
|
|
}
|
|
|
|
|
|
rcPrFilterAclStatsAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A unique identifier for Acl entry in the range
|
|
of Table Size."
|
|
::= { rcPrFilterAclStatsEntry 1 }
|
|
|
|
rcPrFilterAclStatsMatchDefaultCounterPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Packet count of traffic not matching any of the
|
|
Ace rules or hit the Default Action that have the
|
|
count bit turned on in Acl Global Action."
|
|
::= { rcPrFilterAclStatsEntry 2 }
|
|
|
|
rcPrFilterAclStatsMatchDefaultOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Byte count of traffic not matching any of the Ace
|
|
rules or hit the Default Action that have the
|
|
count bit turned on in Acl Global Action."
|
|
::= { rcPrFilterAclStatsEntry 3 }
|
|
|
|
rcPrFilterAclStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear default statistics for ACL Filters."
|
|
::= { rcPrFilterAclStatsEntry 4 }
|
|
|
|
rcPrFilterAclStatsMatchDefaultSecurityPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Security packet count of traffic not matching any of the
|
|
ACE rules or hits on Default Action where the count bit
|
|
is turned on in ACL Global Action."
|
|
::= { rcPrFilterAclStatsEntry 5 }
|
|
|
|
rcPrFilterAclStatsMatchDefaultSecurityOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Security octet count of traffic not matching any of the
|
|
ACE rules or hits on Default Action where the count bit
|
|
is turned on in ACL Global Action."
|
|
::= { rcPrFilterAclStatsEntry 6 }
|
|
|
|
rcPrFilterAclStatsMatchDefaultQosPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "QOS packet count of traffic not matching any of the
|
|
ACE rules or hits on Default Action where the count bit
|
|
is turned on in ACL Global Action."
|
|
::= { rcPrFilterAclStatsEntry 7 }
|
|
|
|
rcPrFilterAclStatsMatchDefaultQosOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "QOS octet count of traffic not matching any of the
|
|
ACE rules or hits on Default Action where the count bit
|
|
is turned on in ACL Global Action."
|
|
::= { rcPrFilterAclStatsEntry 8 }
|
|
|
|
rcPrFilterAclStatsMatchGlobalSecurityPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Security packet count of traffic matching any of the
|
|
ACE rules or hits on Default Action where the count bit
|
|
is turned on in ACL Global Action."
|
|
::= { rcPrFilterAclStatsEntry 9 }
|
|
|
|
rcPrFilterAclStatsMatchGlobalSecurityOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Security octet count of traffic matching any of the
|
|
ACE rules or hits on Default Action where the count bit
|
|
is turned on in ACL Global Action."
|
|
::= { rcPrFilterAclStatsEntry 10 }
|
|
|
|
rcPrFilterAclStatsMatchGlobalQosPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "QOS packet count of traffic matching any of the
|
|
ACE rules or hits on Default Action where the count bit
|
|
is turned on in ACL Global Action."
|
|
::= { rcPrFilterAclStatsEntry 11 }
|
|
|
|
rcPrFilterAclStatsMatchGlobalQosOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "QOS octet count of traffic matching any of the
|
|
ACE rules or hits on Default Action where the count bit
|
|
is turned on in ACL Global Action."
|
|
::= { rcPrFilterAclStatsEntry 12 }
|
|
|
|
|
|
|
|
-- Ace Table
|
|
|
|
rcPrFilterAce OBJECT IDENTIFIER ::= { rcPrFilter 4 }
|
|
|
|
-- Ace information is organized in 28 entries:
|
|
-- rcPrFilterAceEntry
|
|
-- rcPrFilterAceEthSrcAddrEntry
|
|
-- rcPrFilterAceEthDstAddrEntry
|
|
-- rcPrFilterAceEthEtherEntry
|
|
-- rcPrFilterAceEthVlanTagPrioEntry
|
|
-- rcPrFilterAceEthPortEntry
|
|
-- rcPrFilterAceEthVlanIdEntry
|
|
-- rcPrFilterAceArpEntry
|
|
-- rcPrFilterAceIpSrcAddrEntry
|
|
-- rcPrFilterAceIpDstAddrEntry
|
|
-- rcPrFilterAceIpDscpEntry
|
|
-- rcPrFilterAceIpProtoEntry
|
|
-- rcPrFilterAceIpOptionsEntry
|
|
-- rcPrFilterAceIpFragEntry
|
|
-- rcPrFilterAceProtoIcmpMsgTypeEntry
|
|
-- rcPrFilterAceProtoTcpFlagsEntry
|
|
-- rcPrFilterAceStatsEntry
|
|
-- rcPrFilterAceEthShowEntry
|
|
-- rcPrFilterAceIpShowEntry
|
|
-- rcPrFilterAceProtoShowEntry
|
|
-- rcPrFilterAceProtoSrcPortEntry
|
|
-- rcPrFilterAceProtoDstPortEntry
|
|
-- rcPrFilterAceProtoTcpOptionEntry
|
|
|
|
rcPrFilterAceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store information of each Ace
|
|
in context of its parent Acl. This is indexed by
|
|
AclId and AceId."
|
|
::= { rcPrFilterAce 1 }
|
|
|
|
rcPrFilterAceEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace information. Ace is a
|
|
member of one Acl."
|
|
INDEX { rcPrFilterAceAclId,
|
|
rcPrFilterAceId }
|
|
::= {rcPrFilterAceTable 1}
|
|
|
|
RcPrFilterAceEntry ::= SEQUENCE {
|
|
rcPrFilterAceAclId INTEGER,
|
|
rcPrFilterAceId INTEGER,
|
|
rcPrFilterAceName DisplayString,
|
|
rcPrFilterAceMode INTEGER,
|
|
rcPrFilterAceRemarkDscp INTEGER,
|
|
rcPrFilterAceRemarkDot1Priority INTEGER,
|
|
rcPrFilterAceRedirectNextHop IpAddress,
|
|
rcPrFilterAceRedirectUnreach INTEGER,
|
|
rcPrFilterAcePolice INTEGER,
|
|
rcPrFilterAceAdminState EnableValue,
|
|
rcPrFilterAceOperState INTEGER,
|
|
rcPrFilterAceEgressQueue INTEGER,
|
|
rcPrFilterAceEgressQueue1g INTEGER,
|
|
rcPrFilterAceEgressQueue10g INTEGER,
|
|
rcPrFilterAceEgressQueueNNSC INTEGER,
|
|
rcPrFilterAceFlags INTEGER,
|
|
rcPrFilterAceStopOnMatch EnableValue,
|
|
rcPrFilterAceMltIndex INTEGER,
|
|
rcPrFilterAceRowStatus RowStatus,
|
|
rcPrFilterAceIpfixState EnableValue,
|
|
rcPrFilterAceRedirectNextHopIpv6 Ipv6Address,
|
|
rcPrFilterAceDstPortList PortSet,
|
|
rcPrFilterAceDstVlanId Integer32,
|
|
rcPrFilterAceDstMltId Integer32,
|
|
rcPrFilterAceInternalQos Integer32,
|
|
rcPrFilterAceCount EnableValue,
|
|
rcPrFilterAceLog EnableValue,
|
|
rcPrFilterAceCopytoPcap EnableValue,
|
|
rcPrFilterAceDstIp IpAddress,
|
|
rcPrFilterAceDstIpTtl Integer32,
|
|
rcPrFilterAceDstIpDscp INTEGER,
|
|
rcPrFilterAceMonitoringIsidOffset Integer32,
|
|
rcPrFilterAceMonitoringIsid Integer32,
|
|
rcPrFilterAceMirroringQos Integer32,
|
|
rcPrFilterAceRemoveTag TruthValue,
|
|
rcPrFilterAceRedirectNextHopVrfName DisplayString
|
|
}
|
|
|
|
rcPrFilterAceAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEntry 1 }
|
|
|
|
rcPrFilterAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AceId uniquely identifies one Ace entry."
|
|
::= { rcPrFilterAceEntry 2 }
|
|
|
|
rcPrFilterAceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator.
|
|
System automatically assigns a name if the user
|
|
has not assigned one."
|
|
::= { rcPrFilterAceEntry 3 }
|
|
|
|
rcPrFilterAceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
deny(1),
|
|
permit(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operating Mode associated with the Ace is effective
|
|
on the packets matching this Ace."
|
|
DEFVAL { none }
|
|
::= { rcPrFilterAceEntry 4 }
|
|
|
|
rcPrFilterAceRemarkDscp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
phbcs0(0),
|
|
phbcs1(8),
|
|
phbaf11(10),
|
|
phbaf12(12),
|
|
phbaf13(14),
|
|
phbcs2(16),
|
|
phbaf21(18),
|
|
phbaf22(20),
|
|
phbaf23(22),
|
|
phbcs3(24),
|
|
phbaf31(26),
|
|
phbaf32(28),
|
|
phbaf33(30),
|
|
phbcs4(32),
|
|
phbaf41(34),
|
|
phbaf42(36),
|
|
phbaf43(38),
|
|
phbcs5(40),
|
|
phbef(46),
|
|
phbcs6(48),
|
|
phbcs7(56),
|
|
disable(256) -- Invalid ToS/Dscp value
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The 6-bit DSCP field from the ToS byte in Ipv4 header
|
|
encodes the PHB information per DiffServ standards
|
|
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
|
|
(like EF) or PHB-class(like AF1 which includes AF11,
|
|
AF12,AF13) to mark specific diffserv class traffic.
|
|
Set the field value to desired integer dscp code for
|
|
rcPrFilterAceRemarkDscp field to mark non-standard
|
|
traffic classes and local use PHBs."
|
|
DEFVAL { 256 }
|
|
::= { rcPrFilterAceEntry 5 }
|
|
|
|
rcPrFilterAceRemarkDot1Priority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
zero(0),
|
|
one(1),
|
|
two(2),
|
|
three(3),
|
|
four(4),
|
|
five(5),
|
|
six(6),
|
|
seven(7),
|
|
disable(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Dot1 Priority as described by Layer 2 standards,
|
|
802.1Q, 802.1P."
|
|
DEFVAL { disable }
|
|
::= { rcPrFilterAceEntry 6 }
|
|
|
|
rcPrFilterAceRedirectNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Redirect matching IP traffic to the next hop."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcPrFilterAceEntry 7 }
|
|
|
|
rcPrFilterAceRedirectUnreach OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deny(1),
|
|
permit(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the desired behavior for redirected traffic in
|
|
case the specified next-hop is not reachable."
|
|
DEFVAL { deny }
|
|
::= { rcPrFilterAceEntry 8 }
|
|
|
|
rcPrFilterAcePolice OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Policing profile Identifier. Set the desired policing
|
|
profile identifier. Set the value to 0 when policing
|
|
is not desired."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterAceEntry 9 }
|
|
|
|
rcPrFilterAceAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value indicating whether the Ace is enabled.
|
|
An Ace can only be modified if it is disabled."
|
|
DEFVAL { disable }
|
|
::= { rcPrFilterAceEntry 10 }
|
|
|
|
rcPrFilterAceOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
down (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational state of the Ace."
|
|
::= { rcPrFilterAceEntry 11 }
|
|
|
|
rcPrFilterAceEgressQueue OBJECT-TYPE
|
|
SYNTAX INTEGER(0..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Egress Queue for 10/100 card. If only 1
|
|
value is specified then this value is applied to
|
|
Queue1g and Queue10g as well. If 2 values are
|
|
specified then the first value is applied to 10/100
|
|
card and the second value is applied to 1gig and 10gig
|
|
cards. If all three values are specified, then all
|
|
three values are applied respectively to the appropriate
|
|
Egress Queue.
|
|
|
|
If value is greater than 8, it will not be applied to
|
|
the 10/100 card as it only has 8 queues. However, the
|
|
value will be applied to the 1gig and 10gig card types."
|
|
DEFVAL { 64 }
|
|
::= { rcPrFilterAceEntry 12 }
|
|
|
|
rcPrFilterAceEgressQueue1g OBJECT-TYPE
|
|
SYNTAX INTEGER(0..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Egress Queue for 1gig card."
|
|
DEFVAL { 64 }
|
|
::= { rcPrFilterAceEntry 13 }
|
|
|
|
rcPrFilterAceEgressQueue10g OBJECT-TYPE
|
|
SYNTAX INTEGER(0..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Egress Queue for 10gig card."
|
|
DEFVAL { 64 }
|
|
::= { rcPrFilterAceEntry 14 }
|
|
|
|
rcPrFilterAceEgressQueueNNSC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
platinum(0),
|
|
gold(1),
|
|
silver(2),
|
|
bronze(3),
|
|
standard(4),
|
|
custom(5),
|
|
premium(6),
|
|
critical(7),
|
|
disable(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ace Egress Queue NNSC."
|
|
DEFVAL { disable }
|
|
::= { rcPrFilterAceEntry 15 }
|
|
|
|
rcPrFilterAceFlags OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Bitmask for the flags:
|
|
|
|
none(0): Default value for the flags.
|
|
|
|
stopOnMatch(1): set desired behavior for flag
|
|
whether to stop or continue in case an Ace
|
|
matching the packet is found. When this Ace is hit,
|
|
match on other Aces with a lower priority is not
|
|
attempted.
|
|
|
|
count(2): set desired behavior for flag i.e.
|
|
to enable/disable counting in case a packet matching
|
|
the ace is found.
|
|
|
|
copyToPrimaryCp(4): set to enable/disable copying of
|
|
matching packets to primary CP.
|
|
|
|
copyToSecondaryCp(8): set to enable/disable copying of
|
|
matching packets to secondary CP.
|
|
|
|
mirror(16): set to enable/disable mirroring the
|
|
matching packets to an interface. System can mirror
|
|
one port or mirror to 1 port."
|
|
|
|
::= { rcPrFilterAceEntry 16 }
|
|
|
|
rcPrFilterAceStopOnMatch OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value indicating whether stop-on-match option on the
|
|
Ace is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcPrFilterAceEntry 17 }
|
|
|
|
rcPrFilterAceMltIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If this action is specified, it will
|
|
basically override the mlt-index picked
|
|
by the mlt algorithm, when a packet is
|
|
being sent out on MLT ports."
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterAceEntry 18 }
|
|
|
|
rcPrFilterAceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceEntry 19 }
|
|
|
|
rcPrFilterAceIpfixState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value indicating whether ipfix option on the
|
|
Ace is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcPrFilterAceEntry 20 }
|
|
|
|
rcPrFilterAceRedirectNextHopIpv6 OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Redirect matching IPv6 traffic to the next hop."
|
|
::= { rcPrFilterAceEntry 21 }
|
|
|
|
rcPrFilterAceDstPortList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Destination Port List for mirroring the packets."
|
|
::= { rcPrFilterAceEntry 22 }
|
|
|
|
rcPrFilterAceDstVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Destination Vlan to mirror the packets."
|
|
::= { rcPrFilterAceEntry 23 }
|
|
|
|
rcPrFilterAceDstMltId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Destination Mlt to mirror the packets."
|
|
::= { rcPrFilterAceEntry 24 }
|
|
|
|
rcPrFilterAceInternalQos OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Internal QOS Level assigned to the packet flow. DefVal = 8 is Disable"
|
|
DEFVAL { 8 }
|
|
::= { rcPrFilterAceEntry 25 }
|
|
|
|
rcPrFilterAceCount OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value indicating whether Count option on the
|
|
Ace is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcPrFilterAceEntry 26 }
|
|
|
|
rcPrFilterAceLog OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value indicating whether log option on the
|
|
Ace is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcPrFilterAceEntry 27 }
|
|
|
|
rcPrFilterAceCopytoPcap OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Value indicating whether copy to pcap option
|
|
on the Ace is enabled."
|
|
DEFVAL { disable }
|
|
::= { rcPrFilterAceEntry 28 }
|
|
|
|
rcPrFilterAceDstIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Destination IP address to mirror the packets."
|
|
::= { rcPrFilterAceEntry 29 }
|
|
|
|
rcPrFilterAceDstIpTtl OBJECT-TYPE
|
|
SYNTAX Integer32 (2..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ttl value for the mirrored packet when mirror
|
|
destination is IP. If other than default,
|
|
the encapsulated packet will have the given ttl."
|
|
DEFVAL { 64 }
|
|
::= { rcPrFilterAceEntry 30 }
|
|
|
|
rcPrFilterAceDstIpDscp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
phbcs0(0),
|
|
phbcs1(8),
|
|
phbaf11(10),
|
|
phbaf12(12),
|
|
phbaf13(14),
|
|
phbcs2(16),
|
|
phbaf21(18),
|
|
phbaf22(20),
|
|
phbaf23(22),
|
|
phbcs3(24),
|
|
phbaf31(26),
|
|
phbaf32(28),
|
|
phbaf33(30),
|
|
phbcs4(32),
|
|
phbaf41(34),
|
|
phbaf42(36),
|
|
phbaf43(38),
|
|
phbcs5(40),
|
|
phbef(46),
|
|
phbcs6(48),
|
|
phbcs7(56),
|
|
disable(256) -- Invalid ToS/Dscp value
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Dscp value for the mirrored packet when mirror
|
|
destination is IP. The 6-bit DSCP field from the
|
|
ToS byte in Ipv4 header encodes the PHB information
|
|
per DiffServ standards (Refer to DiffServ RFCs 2474).
|
|
Set the Dscp to PHB (like EF) or PHB-class(like AF1 which
|
|
includes AF11, AF12,AF13) to mark specific diffserv class traffic.
|
|
Set the field value to desired integer dscp code for
|
|
rcPrFilterAceIpDscp field to mark non-standard
|
|
traffic classes and local use PHBs."
|
|
DEFVAL { 256 }
|
|
::= { rcPrFilterAceEntry 31 }
|
|
|
|
rcPrFilterAceMonitoringIsidOffset OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the monitoring ISID offset value.
|
|
The offset id value is mapped to actual monitor I-SID value
|
|
in which packets are mirrored to."
|
|
::= { rcPrFilterAceEntry 32 }
|
|
|
|
rcPrFilterAceMonitoringIsid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Actual monitor I-SID value in which packets are mirrored to."
|
|
::= { rcPrFilterAceEntry 33 }
|
|
|
|
rcPrFilterAceMirroringQos OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to define the Quality of Service (QoS) profiles for the mirrored
|
|
packet into monitoring ISID."
|
|
DEFVAL { 1 }
|
|
::= { rcPrFilterAceEntry 34 }
|
|
|
|
rcPrFilterAceRemoveTag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to remove inner vlan tag of the
|
|
mirrored packet into the SPB network.
|
|
By default it is set to false and
|
|
vlan tag will not be removed."
|
|
DEFVAL { false }
|
|
::= { rcPrFilterAceEntry 35 }
|
|
|
|
rcPrFilterAceRedirectNextHopVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "VRF Name associated with IP/IPv6 redirect next hop."
|
|
::= { rcPrFilterAceEntry 36 }
|
|
|
|
|
|
-- ACE Ethernet Source MAC Address Table
|
|
|
|
rcPrFilterAceEthSrcAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceEthSrcAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Ethernet Source MAC
|
|
Address Header information of each Ace in context
|
|
of its parent Acl."
|
|
::= { rcPrFilterAce 2 }
|
|
|
|
rcPrFilterAceEthSrcAddrEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceEthSrcAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Ethernet Source MAC Address
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceEthSrcAddrAclId,
|
|
rcPrFilterAceEthSrcAddrAceId }
|
|
::= { rcPrFilterAceEthSrcAddrTable 1 }
|
|
|
|
RcPrFilterAceEthSrcAddrEntry ::= SEQUENCE {
|
|
rcPrFilterAceEthSrcAddrAclId INTEGER,
|
|
rcPrFilterAceEthSrcAddrAceId INTEGER,
|
|
rcPrFilterAceEthSrcAddrList OCTET STRING,
|
|
rcPrFilterAceEthSrcAddrListCount INTEGER,
|
|
rcPrFilterAceEthSrcAddrOper INTEGER,
|
|
rcPrFilterAceEthSrcAddrRowStatus RowStatus,
|
|
rcPrFilterAceEthSrcAddrOperMask DisplayString
|
|
}
|
|
|
|
rcPrFilterAceEthSrcAddrAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthernetEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthSrcAddrEntry 1 }
|
|
|
|
rcPrFilterAceEthSrcAddrAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthernetEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthSrcAddrEntry 2 }
|
|
|
|
rcPrFilterAceEthSrcAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The list of ethernet source address to match."
|
|
::= { rcPrFilterAceEthSrcAddrEntry 3 }
|
|
|
|
rcPrFilterAceEthSrcAddrListCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the ethernet src address."
|
|
::= { rcPrFilterAceEthSrcAddrEntry 4 }
|
|
|
|
rcPrFilterAceEthSrcAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
mask(8) -- mask
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ethernet Source MAC Address."
|
|
::= { rcPrFilterAceEthSrcAddrEntry 5 }
|
|
|
|
rcPrFilterAceEthSrcAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceEthSrcAddrEntry 6 }
|
|
|
|
rcPrFilterAceEthSrcAddrOperMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Mac Address mask value in hex which can
|
|
be set for the rcPrFilterAceEthSrcAddrOper when
|
|
the option selected is mask. It will be empty or
|
|
set to 000000000000 whenrcPrFilterAceEthSrcAddrOper
|
|
is set to 'eq'. In case of the prefix '0x' is
|
|
specified, 14 charaters is max length"
|
|
::= { rcPrFilterAceEthSrcAddrEntry 7 }
|
|
|
|
-- ACE Ethernet Destination MAC Address Table
|
|
|
|
rcPrFilterAceEthDstAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceEthDstAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Ethernet Destination MAC
|
|
Address Header information of each Ace in context
|
|
of its parent Acl."
|
|
::= { rcPrFilterAce 3 }
|
|
|
|
rcPrFilterAceEthDstAddrEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceEthDstAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Ethernet Destination
|
|
MAC Address information. An Ace is a member of one
|
|
Acl."
|
|
INDEX { rcPrFilterAceEthDstAddrAclId,
|
|
rcPrFilterAceEthDstAddrAceId }
|
|
::= { rcPrFilterAceEthDstAddrTable 1 }
|
|
|
|
RcPrFilterAceEthDstAddrEntry ::= SEQUENCE {
|
|
rcPrFilterAceEthDstAddrAclId INTEGER,
|
|
rcPrFilterAceEthDstAddrAceId INTEGER,
|
|
rcPrFilterAceEthDstAddrList OCTET STRING,
|
|
rcPrFilterAceEthDstAddrListCount INTEGER,
|
|
rcPrFilterAceEthDstAddrOper INTEGER,
|
|
rcPrFilterAceEthDstAddrRowStatus RowStatus,
|
|
rcPrFilterAceEthDstAddrOperMask DisplayString
|
|
}
|
|
|
|
rcPrFilterAceEthDstAddrAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthDstAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthDstAddrEntry 1 }
|
|
|
|
rcPrFilterAceEthDstAddrAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthDstAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthDstAddrEntry 2 }
|
|
|
|
rcPrFilterAceEthDstAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "List of ethernet destination address to
|
|
match."
|
|
::= { rcPrFilterAceEthDstAddrEntry 3 }
|
|
|
|
rcPrFilterAceEthDstAddrListCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the ethernet dst address."
|
|
::= { rcPrFilterAceEthDstAddrEntry 4 }
|
|
|
|
rcPrFilterAceEthDstAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
mask(8) -- mask
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ethernet Destination MAC Address."
|
|
::= { rcPrFilterAceEthDstAddrEntry 5 }
|
|
|
|
rcPrFilterAceEthDstAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceEthDstAddrEntry 6 }
|
|
|
|
rcPrFilterAceEthDstAddrOperMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Mac Address mask value in hex which can
|
|
be set for the rcPrFilterAceEthDstAddrOper when
|
|
the option selected is mask. It will be empty or
|
|
set to 000000000000 whenrcPrFilterAceEthDstAddrOper
|
|
is set to 'eq'. In case of the prefix '0x' is
|
|
specified, 14 charaters is max length"
|
|
::= { rcPrFilterAceEthDstAddrEntry 7 }
|
|
|
|
-- ACE Ethernet Ether Table
|
|
|
|
rcPrFilterAceEthEtherTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceEthEtherEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Ethernet Ether Header
|
|
information of each Ace in context of its parent
|
|
Acl."
|
|
::= { rcPrFilterAce 4 }
|
|
|
|
rcPrFilterAceEthEtherEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceEthEtherEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Ethernet Ether
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceEthEtherAclId,
|
|
rcPrFilterAceEthEtherAceId }
|
|
::= { rcPrFilterAceEthEtherTable 1 }
|
|
|
|
RcPrFilterAceEthEtherEntry ::= SEQUENCE {
|
|
rcPrFilterAceEthEtherAclId INTEGER,
|
|
rcPrFilterAceEthEtherAceId INTEGER,
|
|
rcPrFilterAceEthEtherTypeList OCTET STRING,
|
|
rcPrFilterAceEthEtherTypeListCount INTEGER,
|
|
rcPrFilterAceEthEtherTypeOper INTEGER,
|
|
rcPrFilterAceEthEtherRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceEthEtherAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthEtherEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthEtherEntry 1 }
|
|
|
|
rcPrFilterAceEthEtherAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthEtherEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthEtherEntry 2 }
|
|
|
|
rcPrFilterAceEthEtherTypeList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "EtherType value from ethernet header. For example ARP
|
|
uses 0x0806, IP uses 0x0800. The platform support
|
|
determines the behavior for 802.1Q/p tagged packets.
|
|
The EtherType for 802.1Q tagged frames is 0x8100.
|
|
|
|
Valid range for the 16-bit Ether-type is 0..65535
|
|
and the attribute supports lists/ranges of values.
|
|
Invalid ether-type value 65536 is interpreted as
|
|
field is not desired in match criteria."
|
|
::= { rcPrFilterAceEthEtherEntry 3 }
|
|
|
|
rcPrFilterAceEthEtherTypeListCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the ethernet types."
|
|
::= { rcPrFilterAceEthEtherEntry 4 }
|
|
|
|
rcPrFilterAceEthEtherTypeOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2) -- not equal
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ethernet Type Operators."
|
|
::= { rcPrFilterAceEthEtherEntry 5 }
|
|
|
|
rcPrFilterAceEthEtherRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceEthEtherEntry 6 }
|
|
|
|
-- ACE Ethernet Vlan Tag Priority Table
|
|
|
|
rcPrFilterAceEthVlanTagPrioTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceEthVlanTagPrioEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Ethernet Vlan Tag
|
|
Priority Header information of each Ace in context
|
|
of its parent Acl."
|
|
::= { rcPrFilterAce 5 }
|
|
|
|
rcPrFilterAceEthVlanTagPrioEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceEthVlanTagPrioEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Ethernet Vlan Tag Priority
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceEthVlanTagPrioAclId,
|
|
rcPrFilterAceEthVlanTagPrioAceId }
|
|
::= { rcPrFilterAceEthVlanTagPrioTable 1 }
|
|
|
|
RcPrFilterAceEthVlanTagPrioEntry ::= SEQUENCE {
|
|
rcPrFilterAceEthVlanTagPrioAclId INTEGER,
|
|
rcPrFilterAceEthVlanTagPrioAceId INTEGER,
|
|
rcPrFilterAceEthVlanTagPrioVlanTagPrio INTEGER,
|
|
rcPrFilterAceEthVlanTagPrioOper INTEGER,
|
|
rcPrFilterAceEthVlanTagPrioRowStatus RowStatus,
|
|
rcPrFilterAceEthVlanTagPrioOperMask Integer32
|
|
}
|
|
|
|
rcPrFilterAceEthVlanTagPrioAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthVlanTagPrioEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthVlanTagPrioEntry 1 }
|
|
|
|
rcPrFilterAceEthVlanTagPrioAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthVlanTagPrioEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthVlanTagPrioEntry 2 }
|
|
|
|
rcPrFilterAceEthVlanTagPrioVlanTagPrio OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
zero(0),
|
|
one(1),
|
|
two(2),
|
|
three(3),
|
|
four(4),
|
|
five(5),
|
|
six(6),
|
|
seven(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Priority bits (3-bit field) from the 802.1Q/p tag."
|
|
::= { rcPrFilterAceEthVlanTagPrioEntry 3 }
|
|
|
|
rcPrFilterAceEthVlanTagPrioOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(8) -- mask
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ethernet Vlan Tag Priority."
|
|
::= { rcPrFilterAceEthVlanTagPrioEntry 4 }
|
|
|
|
rcPrFilterAceEthVlanTagPrioRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceEthVlanTagPrioEntry 5 }
|
|
|
|
rcPrFilterAceEthVlanTagPrioOperMask OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'07'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceEthVlanTagPrioOper when the option
|
|
selected is masked. This object is applicable for
|
|
VSP9000. Not for ERS8600"
|
|
::= { rcPrFilterAceEthVlanTagPrioEntry 6 }
|
|
|
|
-- ACE Ethernet Port Table
|
|
|
|
rcPrFilterAceEthPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceEthPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Ethernet Port
|
|
Header information of each Ace in context
|
|
of its parent Acl."
|
|
::= { rcPrFilterAce 6 }
|
|
|
|
rcPrFilterAceEthPortEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceEthPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Ethernet Port
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceEthPortAclId,
|
|
rcPrFilterAceEthPortAceId }
|
|
::= { rcPrFilterAceEthPortTable 1 }
|
|
|
|
RcPrFilterAceEthPortEntry ::= SEQUENCE {
|
|
rcPrFilterAceEthPortAclId INTEGER,
|
|
rcPrFilterAceEthPortAceId INTEGER,
|
|
rcPrFilterAceEthPortPort PortSet,
|
|
rcPrFilterAceEthPortOper INTEGER,
|
|
rcPrFilterAceEthPortRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceEthPortAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthPortEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthPortEntry 1 }
|
|
|
|
rcPrFilterAceEthPortAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthPortEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthPortEntry 2 }
|
|
|
|
rcPrFilterAceEthPortPort OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceEthPortEntry 3 }
|
|
|
|
rcPrFilterAceEthPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2) -- not equal
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Ethernet Port."
|
|
::= { rcPrFilterAceEthPortEntry 4 }
|
|
|
|
rcPrFilterAceEthPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceEthPortEntry 5 }
|
|
|
|
-- ACE Ethernet Vlan Id Table
|
|
|
|
rcPrFilterAceEthVlanIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceEthVlanIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Ethernet Vlan Id
|
|
Header information of each Ace in context
|
|
of its parent Acl."
|
|
::= { rcPrFilterAce 7 }
|
|
|
|
rcPrFilterAceEthVlanIdEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceEthVlanIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Ethernet Vlan Id
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceEthVlanIdAclId,
|
|
rcPrFilterAceEthVlanIdAceId }
|
|
::= { rcPrFilterAceEthVlanIdTable 1 }
|
|
|
|
RcPrFilterAceEthVlanIdEntry ::= SEQUENCE {
|
|
rcPrFilterAceEthVlanIdAclId INTEGER,
|
|
rcPrFilterAceEthVlanIdAceId INTEGER,
|
|
rcPrFilterAceEthVlanIdVlanIdList IdList,
|
|
rcPrFilterAceEthVlanIdOper INTEGER,
|
|
rcPrFilterAceEthVlanIdRowStatus RowStatus,
|
|
rcPrFilterAceEthVlanIdOperMask Integer32,
|
|
rcPrFilterAceEthVlanIdVlanId INTEGER
|
|
}
|
|
|
|
rcPrFilterAceEthVlanIdAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthVlanIdEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthVlanIdEntry 1 }
|
|
|
|
rcPrFilterAceEthVlanIdAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthVlanIdEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthVlanIdEntry 2 }
|
|
|
|
rcPrFilterAceEthVlanIdVlanIdList OBJECT-TYPE
|
|
SYNTAX IdList(SIZE(4096))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id to match on. This is a ERS 8600 supported object.
|
|
VSP9000 uses rcPrFilterAceEthVlanIdVlanId instead"
|
|
::= { rcPrFilterAceEthVlanIdEntry 3 }
|
|
|
|
rcPrFilterAceEthVlanIdOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(8) -- mask
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Ethernet VlanId."
|
|
::= { rcPrFilterAceEthVlanIdEntry 4 }
|
|
|
|
rcPrFilterAceEthVlanIdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceEthVlanIdEntry 5 }
|
|
|
|
rcPrFilterAceEthVlanIdOperMask OBJECT-TYPE
|
|
SYNTAX Integer32(0..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceEthVlanIdOper when the option
|
|
selected is mask. This object is used with
|
|
rcPrFilterAceEthVlanIdVlanId in VSP 9000 to
|
|
replace rcPrFilterAceEthVlanIdVlanIdList "
|
|
::= { rcPrFilterAceEthVlanIdEntry 6 }
|
|
|
|
rcPrFilterAceEthVlanIdVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4084)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id to match on. VSP9000 use this object with
|
|
object rcPrFilterAceEthVlanIdOperMask to replace the
|
|
rcPrFilterAceEthVlanIdVlanIdList"
|
|
::= { rcPrFilterAceEthVlanIdEntry 7 }
|
|
|
|
|
|
-- ACE Arp Table
|
|
|
|
rcPrFilterAceArpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Arp Header information
|
|
of each Ace in context of its parent Acl. "
|
|
::= { rcPrFilterAce 8 }
|
|
|
|
rcPrFilterAceArpEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Arp Header information.
|
|
Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceArpAclId,
|
|
rcPrFilterAceArpAceId }
|
|
::= { rcPrFilterAceArpTable 1 }
|
|
|
|
RcPrFilterAceArpEntry ::= SEQUENCE {
|
|
rcPrFilterAceArpAclId INTEGER,
|
|
rcPrFilterAceArpAceId INTEGER,
|
|
rcPrFilterAceArpType INTEGER,
|
|
rcPrFilterAceArpOper INTEGER,
|
|
rcPrFilterAceArpValue INTEGER,
|
|
rcPrFilterAceArpRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceArpAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceArpEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceArpEntry 1 }
|
|
|
|
rcPrFilterAceArpAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceArpEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceArpEntry 2 }
|
|
|
|
rcPrFilterAceArpType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
operation(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ace Arp Operation."
|
|
DEFVAL { operation }
|
|
::= { rcPrFilterAceArpEntry 3 }
|
|
|
|
rcPrFilterAceArpOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1) -- exact match
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Arp Operation."
|
|
::= { rcPrFilterAceArpEntry 4 }
|
|
|
|
rcPrFilterAceArpValue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
arpRequest(1),
|
|
arpResponse(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ace Arp can be a request or a response."
|
|
::= { rcPrFilterAceArpEntry 5 }
|
|
|
|
rcPrFilterAceArpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceArpEntry 6 }
|
|
|
|
-- ACE Ip Source Address Table
|
|
|
|
rcPrFilterAceIpSrcAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpSrcAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IP Source Address Header
|
|
information of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 9 }
|
|
|
|
rcPrFilterAceIpSrcAddrEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpSrcAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IP Source Address Header
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpSrcAddrAclId,
|
|
rcPrFilterAceIpSrcAddrAceId }
|
|
::= { rcPrFilterAceIpSrcAddrTable 1 }
|
|
|
|
RcPrFilterAceIpSrcAddrEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpSrcAddrAclId INTEGER,
|
|
rcPrFilterAceIpSrcAddrAceId INTEGER,
|
|
rcPrFilterAceIpSrcAddrList OCTET STRING,
|
|
rcPrFilterAceIpSrcAddrListCount INTEGER,
|
|
rcPrFilterAceIpSrcAddrOper INTEGER,
|
|
rcPrFilterAceIpSrcAddrRowStatus RowStatus,
|
|
rcPrFilterAceIpSrcAddrIpAddr IpAddress,
|
|
rcPrFilterAceIpSrcAddrOperMaskRange IpAddress
|
|
}
|
|
|
|
rcPrFilterAceIpSrcAddrAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpSrcAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpSrcAddrEntry 1 }
|
|
|
|
rcPrFilterAceIpSrcAddrAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpSrcAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpSrcAddrEntry 2 }
|
|
|
|
rcPrFilterAceIpSrcAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The list of ip source address to match from IP
|
|
header. Not applicable to VSP9000"
|
|
::= { rcPrFilterAceIpSrcAddrEntry 3 }
|
|
|
|
rcPrFilterAceIpSrcAddrListCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the ip src address. Not applicable
|
|
to VSP9000"
|
|
::= { rcPrFilterAceIpSrcAddrEntry 4 }
|
|
|
|
rcPrFilterAceIpSrcAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
prefix(8), -- prefix list
|
|
mask(9),
|
|
range(10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ip Source Address."
|
|
::= { rcPrFilterAceIpSrcAddrEntry 5 }
|
|
|
|
rcPrFilterAceIpSrcAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpSrcAddrEntry 6 }
|
|
|
|
rcPrFilterAceIpSrcAddrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP Source Address to match from IP header.
|
|
This object is defined and used to replace
|
|
the rcPrFilterAceIpSrcAddrList by VSP 9000"
|
|
::= { rcPrFilterAceIpSrcAddrEntry 7 }
|
|
|
|
rcPrFilterAceIpSrcAddrOperMaskRange OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP Mask value or High IP address based on
|
|
object rcPrFilterAceIpSrcAddrOper mask/range
|
|
option is selected."
|
|
::= { rcPrFilterAceIpSrcAddrEntry 8 }
|
|
|
|
-- ACE Ip Destination Address Table
|
|
|
|
rcPrFilterAceIpDstAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpDstAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IP Destination Address
|
|
Header information of each Ace in context of its
|
|
parent Acl."
|
|
::= { rcPrFilterAce 10 }
|
|
|
|
rcPrFilterAceIpDstAddrEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpDstAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IP Destination Address
|
|
Header information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpDstAddrAclId,
|
|
rcPrFilterAceIpDstAddrAceId }
|
|
::= { rcPrFilterAceIpDstAddrTable 1 }
|
|
|
|
RcPrFilterAceIpDstAddrEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpDstAddrAclId INTEGER,
|
|
rcPrFilterAceIpDstAddrAceId INTEGER,
|
|
rcPrFilterAceIpDstAddrList OCTET STRING,
|
|
rcPrFilterAceIpDstAddrListCount INTEGER,
|
|
rcPrFilterAceIpDstAddrOper INTEGER,
|
|
rcPrFilterAceIpDstAddrRowStatus RowStatus,
|
|
rcPrFilterAceIpDstAddrIpAddr IpAddress,
|
|
rcPrFilterAceIpDstAddrOperMaskRange IpAddress
|
|
}
|
|
|
|
rcPrFilterAceIpDstAddrAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpDstAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpDstAddrEntry 1 }
|
|
|
|
rcPrFilterAceIpDstAddrAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpDstAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpDstAddrEntry 2 }
|
|
|
|
rcPrFilterAceIpDstAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The list of ip dst address to match from IP header.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceIpDstAddrEntry 3 }
|
|
|
|
rcPrFilterAceIpDstAddrListCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the IP Destination Address. Not
|
|
applicable to VSP9000"
|
|
::= { rcPrFilterAceIpDstAddrEntry 4 }
|
|
|
|
rcPrFilterAceIpDstAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
prefix(8), -- prefix list
|
|
mask(9),
|
|
range(10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace IP Destination Address."
|
|
::= { rcPrFilterAceIpDstAddrEntry 5 }
|
|
|
|
rcPrFilterAceIpDstAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpDstAddrEntry 6 }
|
|
|
|
rcPrFilterAceIpDstAddrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP Source Address to match from IP header.
|
|
This object is defined and used to replace
|
|
the rcPrFilterAceIpSrcAddrList by VSP 9000"
|
|
::= { rcPrFilterAceIpDstAddrEntry 7 }
|
|
|
|
rcPrFilterAceIpDstAddrOperMaskRange OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP mask value or Hi Ip address based on
|
|
object rcPrFilterAceIpDstAddrOper mask/range
|
|
option is selected."
|
|
::= { rcPrFilterAceIpDstAddrEntry 8 }
|
|
|
|
-- ACE Ip Dscp Table
|
|
|
|
rcPrFilterAceIpDscpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IP Dscp Header information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 11 }
|
|
|
|
rcPrFilterAceIpDscpEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IP Dscp Header information.
|
|
An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpDscpAclId,
|
|
rcPrFilterAceIpDscpAceId }
|
|
::= { rcPrFilterAceIpDscpTable 1 }
|
|
|
|
RcPrFilterAceIpDscpEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpDscpAclId INTEGER,
|
|
rcPrFilterAceIpDscpAceId INTEGER,
|
|
rcPrFilterAceIpDscpList OCTET STRING,
|
|
rcPrFilterAceIpDscpListCount INTEGER,
|
|
rcPrFilterAceIpDscpOper INTEGER,
|
|
rcPrFilterAceIpDscpRowStatus RowStatus,
|
|
rcPrFilterAceIpDscpOperMask Integer32
|
|
}
|
|
|
|
rcPrFilterAceIpDscpAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpDscpEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpDscpEntry 1 }
|
|
|
|
rcPrFilterAceIpDscpAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpDscpEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpDscpEntry 2 }
|
|
|
|
rcPrFilterAceIpDscpList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The 6-bit DSCP field from the ToS byte in Ipv4 header
|
|
encodes the PHB information per DiffServ standards
|
|
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
|
|
(like EF) or PHB-class(like AF1 which includes AF11,
|
|
AF12,AF13) to match specific diffserv class traffic.
|
|
Set the field value to desired dscp code for
|
|
'rcPrFilterAceIpDscp' field to match non-standard
|
|
traffic classes and local use PHBs."
|
|
DEFVAL { "disable" }
|
|
::= { rcPrFilterAceIpDscpEntry 3 }
|
|
|
|
rcPrFilterAceIpDscpListCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the dscp values."
|
|
::= { rcPrFilterAceIpDscpEntry 4 }
|
|
|
|
rcPrFilterAceIpDscpOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ip Dscp."
|
|
::= { rcPrFilterAceIpDscpEntry 5 }
|
|
|
|
rcPrFilterAceIpDscpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpDscpEntry 6 }
|
|
|
|
rcPrFilterAceIpDscpOperMask OBJECT-TYPE
|
|
SYNTAX Integer32(0..'40'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceIpDscpOper when the option
|
|
selected is mask. It will be set to 0 or be used
|
|
when rcPrFilterAceIpDscpOper is set ro eq"
|
|
::= { rcPrFilterAceIpDscpEntry 7 }
|
|
|
|
-- ACE Ip Proto Table
|
|
|
|
rcPrFilterAceIpProtoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpProtoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IP Proto Header information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 12 }
|
|
|
|
rcPrFilterAceIpProtoEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpProtoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IP Proto Header information.
|
|
An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpProtoAclId,
|
|
rcPrFilterAceIpProtoAceId }
|
|
::= { rcPrFilterAceIpProtoTable 1 }
|
|
|
|
RcPrFilterAceIpProtoEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpProtoAclId INTEGER,
|
|
rcPrFilterAceIpProtoAceId INTEGER,
|
|
rcPrFilterAceIpProtoList OCTET STRING,
|
|
rcPrFilterAceIpProtoListCount INTEGER,
|
|
rcPrFilterAceIpProtoOper INTEGER,
|
|
rcPrFilterAceIpProtoRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceIpProtoAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpProtoEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpProtoEntry 1 }
|
|
|
|
rcPrFilterAceIpProtoAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpProtoEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpProtoEntry 2 }
|
|
|
|
rcPrFilterAceIpProtoList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ip protocol Type from the ip header to be matched.
|
|
Valid Ip protocol range is 0..255. Few of the Protocol
|
|
Types are enumerated above. In case the desired
|
|
protocol number is not available in the enumerated
|
|
list set protocol to desired integer value"
|
|
::= { rcPrFilterAceIpProtoEntry 3 }
|
|
|
|
rcPrFilterAceIpProtoListCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the ethernet protocol ids."
|
|
::= { rcPrFilterAceIpProtoEntry 4 }
|
|
|
|
rcPrFilterAceIpProtoOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2) -- not equal
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ip Protocols."
|
|
::= { rcPrFilterAceIpProtoEntry 5 }
|
|
|
|
rcPrFilterAceIpProtoRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpProtoEntry 6 }
|
|
|
|
-- ACE Ip Options Table
|
|
|
|
rcPrFilterAceIpOptionsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpOptionsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IP Options Header
|
|
information of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 13 }
|
|
|
|
rcPrFilterAceIpOptionsEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpOptionsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IP Options Header
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpOptionsAclId,
|
|
rcPrFilterAceIpOptionsAceId }
|
|
::= { rcPrFilterAceIpOptionsTable 1 }
|
|
|
|
RcPrFilterAceIpOptionsEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpOptionsAclId INTEGER,
|
|
rcPrFilterAceIpOptionsAceId INTEGER,
|
|
rcPrFilterAceIpOptionsOptions INTEGER,
|
|
rcPrFilterAceIpOptionsOper INTEGER,
|
|
rcPrFilterAceIpOptionsRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceIpOptionsAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpOptionsEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpOptionsEntry 1 }
|
|
|
|
rcPrFilterAceIpOptionsAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpOptionsEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpOptionsEntry 2 }
|
|
|
|
rcPrFilterAceIpOptionsOptions OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noOperation(1),
|
|
recordRoute(7),
|
|
experimentalMeasurement(10),
|
|
mtuProbe(11),
|
|
mtuReply(12),
|
|
encode(15),
|
|
timestamp(68),
|
|
traceroute(82),
|
|
baseSecurity(130),
|
|
looseSourceRoute(131),
|
|
extendedSecurity(133),
|
|
commercialSecurity(134),
|
|
streamID(136),
|
|
strictSourceRouting(137),
|
|
experimentalAccessControl(142),
|
|
imiTrafficDescriptor(144),
|
|
extendedIP(145),
|
|
addressExtension(147),
|
|
routeAlert(148),
|
|
selectiveDirectedBroadcast(149),
|
|
nsapAddresses(150),
|
|
dynamicPacketState(151),
|
|
upstreamMulticastPacket(152),
|
|
experimentalFlowControl(205)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ip options to be matched from the IP Header."
|
|
::= { rcPrFilterAceIpOptionsEntry 3 }
|
|
|
|
rcPrFilterAceIpOptionsOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
any(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Logical Operator - only 'any' is valid at present."
|
|
DEFVAL { any }
|
|
::= { rcPrFilterAceIpOptionsEntry 4 }
|
|
|
|
rcPrFilterAceIpOptionsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpOptionsEntry 5 }
|
|
|
|
-- ACE Ip Fragmentation Table
|
|
|
|
rcPrFilterAceIpFragTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpFragEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IP Fragmentation Header
|
|
information of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 14 }
|
|
|
|
rcPrFilterAceIpFragEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpFragEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IP Fragmentation Header
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpFragAclId,
|
|
rcPrFilterAceIpFragAceId }
|
|
::= { rcPrFilterAceIpFragTable 1 }
|
|
|
|
RcPrFilterAceIpFragEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpFragAclId INTEGER,
|
|
rcPrFilterAceIpFragAceId INTEGER,
|
|
rcPrFilterAceIpFragFragmentation INTEGER,
|
|
rcPrFilterAceIpFragOper INTEGER,
|
|
rcPrFilterAceIpFragRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceIpFragAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpFragEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpFragEntry 1 }
|
|
|
|
rcPrFilterAceIpFragAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpFragEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpFragEntry 2 }
|
|
|
|
rcPrFilterAceIpFragFragmentation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noFragment(0),
|
|
anyFragment(1),
|
|
moreFragment(2),
|
|
unused3(3),
|
|
lastFragment(4),
|
|
unused5(5),
|
|
unused6(6),
|
|
unused7(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ip Fragmentation bits to be matched from the IP
|
|
Header."
|
|
DEFVAL { noFragment }
|
|
::= { rcPrFilterAceIpFragEntry 3 }
|
|
|
|
rcPrFilterAceIpFragOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1) -- exact match
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ip fragmentation."
|
|
::= { rcPrFilterAceIpFragEntry 4 }
|
|
|
|
rcPrFilterAceIpFragRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpFragEntry 5 }
|
|
|
|
-- ACE Protocol TcpSrcPort table
|
|
|
|
rcPrFilterAceProtoTcpSrcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoTcpSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store TCP Source Port information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 15 }
|
|
|
|
rcPrFilterAceProtoTcpSrcPortEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoTcpSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace Protocol TCP Source Port
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoTcpSrcPortAclId,
|
|
rcPrFilterAceProtoTcpSrcPortAceId }
|
|
::= { rcPrFilterAceProtoTcpSrcPortTable 1 }
|
|
|
|
|
|
RcPrFilterAceProtoTcpSrcPortEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoTcpSrcPortAclId INTEGER,
|
|
rcPrFilterAceProtoTcpSrcPortAceId INTEGER,
|
|
rcPrFilterAceProtoTcpSrcPortPort OCTET STRING,
|
|
rcPrFilterAceProtoTcpSrcPortCount INTEGER,
|
|
rcPrFilterAceProtoTcpSrcPortOper INTEGER,
|
|
rcPrFilterAceProtoTcpSrcPortRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceProtoTcpSrcPortAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoTcpSrcPortEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoTcpSrcPortEntry 1 }
|
|
|
|
rcPrFilterAceProtoTcpSrcPortAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoTcpSrcPortEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoTcpSrcPortEntry 2 }
|
|
|
|
rcPrFilterAceProtoTcpSrcPortPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceProtoTcpSrcPortEntry 3 }
|
|
|
|
rcPrFilterAceProtoTcpSrcPortCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the TCP source port."
|
|
::= { rcPrFilterAceProtoTcpSrcPortEntry 4 }
|
|
|
|
rcPrFilterAceProtoTcpSrcPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4) -- greater than or equal to
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol TcpSrcPort."
|
|
::= { rcPrFilterAceProtoTcpSrcPortEntry 5 }
|
|
|
|
rcPrFilterAceProtoTcpSrcPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoTcpSrcPortEntry 6 }
|
|
|
|
-- ACE Protocol UdpSrcPort table
|
|
|
|
rcPrFilterAceProtoUdpSrcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoUdpSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store UDP Source Port information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 16 }
|
|
|
|
rcPrFilterAceProtoUdpSrcPortEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoUdpSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace Protocol UDP Source Port
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoUdpSrcPortAclId,
|
|
rcPrFilterAceProtoUdpSrcPortAceId }
|
|
::= { rcPrFilterAceProtoUdpSrcPortTable 1 }
|
|
|
|
|
|
RcPrFilterAceProtoUdpSrcPortEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoUdpSrcPortAclId INTEGER,
|
|
rcPrFilterAceProtoUdpSrcPortAceId INTEGER,
|
|
rcPrFilterAceProtoUdpSrcPortPort OCTET STRING,
|
|
rcPrFilterAceProtoUdpSrcPortCount INTEGER,
|
|
rcPrFilterAceProtoUdpSrcPortOper INTEGER,
|
|
rcPrFilterAceProtoUdpSrcPortRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceProtoUdpSrcPortAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoUdpSrcPortEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoUdpSrcPortEntry 1 }
|
|
|
|
rcPrFilterAceProtoUdpSrcPortAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoUdpSrcPortEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoUdpSrcPortEntry 2 }
|
|
|
|
rcPrFilterAceProtoUdpSrcPortPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceProtoUdpSrcPortEntry 3 }
|
|
|
|
rcPrFilterAceProtoUdpSrcPortCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the UDP source port."
|
|
::= { rcPrFilterAceProtoUdpSrcPortEntry 4 }
|
|
|
|
rcPrFilterAceProtoUdpSrcPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4) -- greater than or equal to
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol UdpSrcPort."
|
|
::= { rcPrFilterAceProtoUdpSrcPortEntry 5 }
|
|
|
|
rcPrFilterAceProtoUdpSrcPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoUdpSrcPortEntry 6 }
|
|
|
|
-- ACE Protocol TcpDstPort table
|
|
|
|
rcPrFilterAceProtoTcpDstPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoTcpDstPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store TCP Dest Port information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 17 }
|
|
|
|
rcPrFilterAceProtoTcpDstPortEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoTcpDstPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace Protocol TCP Dest Port
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoTcpDstPortAclId,
|
|
rcPrFilterAceProtoTcpDstPortAceId }
|
|
::= { rcPrFilterAceProtoTcpDstPortTable 1 }
|
|
|
|
|
|
RcPrFilterAceProtoTcpDstPortEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoTcpDstPortAclId INTEGER,
|
|
rcPrFilterAceProtoTcpDstPortAceId INTEGER,
|
|
rcPrFilterAceProtoTcpDstPortPort OCTET STRING,
|
|
rcPrFilterAceProtoTcpDstPortCount INTEGER,
|
|
rcPrFilterAceProtoTcpDstPortOper INTEGER,
|
|
rcPrFilterAceProtoTcpDstPortRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceProtoTcpDstPortAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoTcpDstPortEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoTcpDstPortEntry 1 }
|
|
|
|
rcPrFilterAceProtoTcpDstPortAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoTcpDstPortEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoTcpDstPortEntry 2 }
|
|
|
|
rcPrFilterAceProtoTcpDstPortPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceProtoTcpDstPortEntry 3 }
|
|
|
|
rcPrFilterAceProtoTcpDstPortCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the TCP dest port."
|
|
::= { rcPrFilterAceProtoTcpDstPortEntry 4 }
|
|
|
|
rcPrFilterAceProtoTcpDstPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4) -- greater than or equal to
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol TcpDstPort."
|
|
::= { rcPrFilterAceProtoTcpDstPortEntry 5 }
|
|
|
|
rcPrFilterAceProtoTcpDstPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoTcpDstPortEntry 6 }
|
|
|
|
-- ACE Protocol UdpDstPort table
|
|
|
|
rcPrFilterAceProtoUdpDstPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoUdpDstPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store UDP Dest Port information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 18 }
|
|
|
|
rcPrFilterAceProtoUdpDstPortEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoUdpDstPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace Protocol UDP Dest Port
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoUdpDstPortAclId,
|
|
rcPrFilterAceProtoUdpDstPortAceId }
|
|
::= { rcPrFilterAceProtoUdpDstPortTable 1 }
|
|
|
|
|
|
RcPrFilterAceProtoUdpDstPortEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoUdpDstPortAclId INTEGER,
|
|
rcPrFilterAceProtoUdpDstPortAceId INTEGER,
|
|
rcPrFilterAceProtoUdpDstPortPort OCTET STRING,
|
|
rcPrFilterAceProtoUdpDstPortCount INTEGER,
|
|
rcPrFilterAceProtoUdpDstPortOper INTEGER,
|
|
rcPrFilterAceProtoUdpDstPortRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceProtoUdpDstPortAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoUdpDstPortEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoUdpDstPortEntry 1 }
|
|
|
|
rcPrFilterAceProtoUdpDstPortAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoUdpDstPortEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoUdpDstPortEntry 2 }
|
|
|
|
rcPrFilterAceProtoUdpDstPortPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceProtoUdpDstPortEntry 3 }
|
|
|
|
rcPrFilterAceProtoUdpDstPortCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the UDP dest port."
|
|
::= { rcPrFilterAceProtoUdpDstPortEntry 4 }
|
|
|
|
rcPrFilterAceProtoUdpDstPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4) -- greater than or equal to
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol UdpDstPort."
|
|
::= { rcPrFilterAceProtoUdpDstPortEntry 5 }
|
|
|
|
rcPrFilterAceProtoUdpDstPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoUdpDstPortEntry 6 }
|
|
|
|
-- ACE Protocol IcmpMsgType table
|
|
|
|
rcPrFilterAceProtoIcmpMsgTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoIcmpMsgTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store ICMP message type information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 19 }
|
|
|
|
rcPrFilterAceProtoIcmpMsgTypeEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoIcmpMsgTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace ICMP message type
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoIcmpMsgTypeAclId,
|
|
rcPrFilterAceProtoIcmpMsgTypeAceId }
|
|
::= { rcPrFilterAceProtoIcmpMsgTypeTable 1 }
|
|
|
|
|
|
RcPrFilterAceProtoIcmpMsgTypeEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoIcmpMsgTypeAclId INTEGER,
|
|
rcPrFilterAceProtoIcmpMsgTypeAceId INTEGER,
|
|
rcPrFilterAceProtoIcmpMsgTypeList OCTET STRING,
|
|
rcPrFilterAceProtoIcmpMsgTypeCount INTEGER,
|
|
rcPrFilterAceProtoIcmpMsgTypeOper INTEGER,
|
|
rcPrFilterAceProtoIcmpMsgTypeRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceProtoIcmpMsgTypeAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoIcmpMsgTypeEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoIcmpMsgTypeEntry 1 }
|
|
|
|
rcPrFilterAceProtoIcmpMsgTypeAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoIcmpMsgTypeEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoIcmpMsgTypeEntry 2 }
|
|
|
|
rcPrFilterAceProtoIcmpMsgTypeList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "One or a list of Icmp messages to be matched.
|
|
Need to provide strings, number of protocol header
|
|
types (pre-defined values plus user-defined headers).
|
|
Valid range is 0 to 255 (reserved)."
|
|
::= { rcPrFilterAceProtoIcmpMsgTypeEntry 3 }
|
|
|
|
rcPrFilterAceProtoIcmpMsgTypeCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the ICMP message types."
|
|
::= { rcPrFilterAceProtoIcmpMsgTypeEntry 4 }
|
|
|
|
rcPrFilterAceProtoIcmpMsgTypeOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2) -- not equal
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol IcmpMsgTypes."
|
|
::= { rcPrFilterAceProtoIcmpMsgTypeEntry 5 }
|
|
|
|
rcPrFilterAceProtoIcmpMsgTypeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoIcmpMsgTypeEntry 6 }
|
|
|
|
-- ACE Protocol Tcp-flags table
|
|
|
|
rcPrFilterAceProtoTcpFlagsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoTcpFlagsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store TCP Flags information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 20 }
|
|
|
|
rcPrFilterAceProtoTcpFlagsEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoTcpFlagsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace Protocol TCP flags
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoTcpFlagsAclId,
|
|
rcPrFilterAceProtoTcpFlagsAceId }
|
|
::= { rcPrFilterAceProtoTcpFlagsTable 1 }
|
|
|
|
|
|
RcPrFilterAceProtoTcpFlagsEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoTcpFlagsAclId INTEGER,
|
|
rcPrFilterAceProtoTcpFlagsAceId INTEGER,
|
|
rcPrFilterAceProtoTcpFlagsList OCTET STRING,
|
|
rcPrFilterAceProtoTcpFlagsCount INTEGER,
|
|
rcPrFilterAceProtoTcpFlagsOper INTEGER,
|
|
rcPrFilterAceProtoTcpFlagsRowStatus RowStatus,
|
|
rcPrFilterAceProtoTcpFlagsOperMask Integer32
|
|
}
|
|
|
|
rcPrFilterAceProtoTcpFlagsAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the rcPrFilterAceProtoTcpFlagsEntry,
|
|
a unique identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoTcpFlagsEntry 1 }
|
|
|
|
rcPrFilterAceProtoTcpFlagsAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the rcPrFilterAceProtoTcpFlagsEntry,
|
|
a unique identifier for Ace entry in the
|
|
range of Table Size."
|
|
::= { rcPrFilterAceProtoTcpFlagsEntry 2 }
|
|
|
|
rcPrFilterAceProtoTcpFlagsList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "One or a list of Tcp flags to be matched.
|
|
Need to provide strings, number of protocol header
|
|
types (pre-defined values plus user-defined headers).
|
|
Valid range is 0 to 63"
|
|
::= { rcPrFilterAceProtoTcpFlagsEntry 3 }
|
|
|
|
rcPrFilterAceProtoTcpFlagsCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the TCP flags."
|
|
::= { rcPrFilterAceProtoTcpFlagsEntry 4 }
|
|
|
|
rcPrFilterAceProtoTcpFlagsOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1),
|
|
matchAny(6),
|
|
matchAll(7),
|
|
mask(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol TcpFlags."
|
|
::= { rcPrFilterAceProtoTcpFlagsEntry 5 }
|
|
|
|
rcPrFilterAceProtoTcpFlagsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoTcpFlagsEntry 6 }
|
|
|
|
rcPrFilterAceProtoTcpFlagsOperMask OBJECT-TYPE
|
|
SYNTAX Integer32(0..'3F'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceProtoTcpFlagsOper when the option
|
|
selected is mask. It will be set 0x0 when object
|
|
rcPrFilterAceProtoTcpFlagsOper is set to eq"
|
|
::= { rcPrFilterAceProtoTcpFlagsEntry 7 }
|
|
|
|
-- ACE Pattern Table
|
|
|
|
-- Ace Pattern 1
|
|
rcPrFilterAcePattern1Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAcePattern1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of pattern fields for Aces to manage the
|
|
settings for each user defined field. "
|
|
::= { rcPrFilterAce 21 }
|
|
|
|
rcPrFilterAcePattern1Entry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAcePattern1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace User Defined Pattern
|
|
information. Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAcePattern1AclId,
|
|
rcPrFilterAcePattern1AceId }
|
|
::= { rcPrFilterAcePattern1Table 1 }
|
|
|
|
RcPrFilterAcePattern1Entry ::= SEQUENCE {
|
|
rcPrFilterAcePattern1AclId INTEGER,
|
|
rcPrFilterAcePattern1AceId INTEGER,
|
|
rcPrFilterAcePattern1Name DisplayString,
|
|
rcPrFilterAcePattern1Value OCTET STRING,
|
|
rcPrFilterAcePattern1Oper INTEGER,
|
|
rcPrFilterAcePattern1RowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAcePattern1AclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AcePatternEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAcePattern1Entry 1 }
|
|
|
|
rcPrFilterAcePattern1AceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AcePatternEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAcePattern1Entry 2 }
|
|
|
|
rcPrFilterAcePattern1Name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator for
|
|
the Ace Pattern Entry."
|
|
::= { rcPrFilterAcePattern1Entry 3 }
|
|
|
|
rcPrFilterAcePattern1Value OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the pattern value as numeric string. The numeric
|
|
value of each byte is encoded in one octet of the
|
|
string. Unused bytes are left at the trailing end of
|
|
string. The number of bytes to extract from this string
|
|
is set in rcPrFilterActPatternLength."
|
|
DEFVAL { "" }
|
|
::= { rcPrFilterAcePattern1Entry 4 }
|
|
|
|
rcPrFilterAcePattern1Oper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
le(3), -- less than or equal to
|
|
ge(4) -- greater than or equal to
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Pattern."
|
|
::= { rcPrFilterAcePattern1Entry 5 }
|
|
|
|
rcPrFilterAcePattern1RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAcePattern1Entry 6 }
|
|
|
|
|
|
-- Ace Pattern 2
|
|
rcPrFilterAcePattern2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAcePattern2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of pattern fields for Aces to manage the
|
|
settings for each user defined field. "
|
|
::= { rcPrFilterAce 22 }
|
|
|
|
rcPrFilterAcePattern2Entry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAcePattern2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace User Defined Pattern
|
|
information. Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAcePattern2AclId,
|
|
rcPrFilterAcePattern2AceId }
|
|
::= { rcPrFilterAcePattern2Table 1 }
|
|
|
|
RcPrFilterAcePattern2Entry ::= SEQUENCE {
|
|
rcPrFilterAcePattern2AclId INTEGER,
|
|
rcPrFilterAcePattern2AceId INTEGER,
|
|
rcPrFilterAcePattern2Name DisplayString,
|
|
rcPrFilterAcePattern2Value OCTET STRING,
|
|
rcPrFilterAcePattern2Oper INTEGER,
|
|
rcPrFilterAcePattern2RowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAcePattern2AclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AcePatternEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAcePattern2Entry 1 }
|
|
|
|
rcPrFilterAcePattern2AceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AcePatternEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAcePattern2Entry 2 }
|
|
|
|
rcPrFilterAcePattern2Name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator for
|
|
the Ace Pattern Entry."
|
|
::= { rcPrFilterAcePattern2Entry 3 }
|
|
|
|
rcPrFilterAcePattern2Value OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the pattern value as numeric string. The numeric
|
|
value of each byte is encoded in one octet of the
|
|
string. Unused bytes are left at the trailing end of
|
|
string. The number of bytes to extract from this string
|
|
is set in rcPrFilterActPatternLength."
|
|
DEFVAL { "" }
|
|
::= { rcPrFilterAcePattern2Entry 4 }
|
|
|
|
rcPrFilterAcePattern2Oper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
le(3), -- less than or equal to
|
|
ge(4) -- greater than or equal to
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Pattern."
|
|
::= { rcPrFilterAcePattern2Entry 5 }
|
|
|
|
rcPrFilterAcePattern2RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAcePattern2Entry 6 }
|
|
|
|
-- Ace Pattern 3
|
|
rcPrFilterAcePattern3Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAcePattern3Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of pattern fields for Aces to manage the
|
|
settings for each user defined field. "
|
|
::= { rcPrFilterAce 23 }
|
|
|
|
rcPrFilterAcePattern3Entry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAcePattern3Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace User Defined Pattern
|
|
information. Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAcePattern3AclId,
|
|
rcPrFilterAcePattern3AceId }
|
|
::= { rcPrFilterAcePattern3Table 1 }
|
|
|
|
RcPrFilterAcePattern3Entry ::= SEQUENCE {
|
|
rcPrFilterAcePattern3AclId INTEGER,
|
|
rcPrFilterAcePattern3AceId INTEGER,
|
|
rcPrFilterAcePattern3Name DisplayString,
|
|
rcPrFilterAcePattern3Value OCTET STRING,
|
|
rcPrFilterAcePattern3Oper INTEGER,
|
|
rcPrFilterAcePattern3RowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAcePattern3AclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AcePatternEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAcePattern3Entry 1 }
|
|
|
|
rcPrFilterAcePattern3AceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AcePatternEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAcePattern3Entry 2 }
|
|
|
|
rcPrFilterAcePattern3Name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator for
|
|
the Ace Pattern Entry."
|
|
::= { rcPrFilterAcePattern3Entry 3 }
|
|
|
|
rcPrFilterAcePattern3Value OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the pattern value as numeric string. The numeric
|
|
value of each byte is encoded in one octet of the
|
|
string. Unused bytes are left at the trailing end of
|
|
string. The number of bytes to extract from this string
|
|
is set in rcPrFilterActPatternLength."
|
|
DEFVAL { "" }
|
|
::= { rcPrFilterAcePattern3Entry 4 }
|
|
|
|
rcPrFilterAcePattern3Oper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
le(3), -- less than or equal to
|
|
ge(4) -- greater than or equal to
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Pattern."
|
|
::= { rcPrFilterAcePattern3Entry 5 }
|
|
|
|
rcPrFilterAcePattern3RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAcePattern3Entry 6 }
|
|
|
|
-- Per-ACE-Per-Port Statistics
|
|
|
|
rcPrFilterAceStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of ACE Statistics Entries to store per-ACE-per-Port
|
|
Statistics"
|
|
::= { rcPrFilterAce 24 }
|
|
|
|
rcPrFilterAceStatsEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ace Statistics entry holding per-ACE-per-port Statistics"
|
|
INDEX { rcPrFilterAceStatsAclId,
|
|
rcPrFilterAceStatsAceId,
|
|
rcPrFilterAceStatsPortId }
|
|
::= { rcPrFilterAceStatsTable 1 }
|
|
|
|
RcPrFilterAceStatsEntry ::= SEQUENCE {
|
|
rcPrFilterAceStatsAclId INTEGER,
|
|
rcPrFilterAceStatsAceId INTEGER,
|
|
rcPrFilterAceStatsPortId INTEGER,
|
|
rcPrFilterAceStatsMatchCountPkts Counter64,
|
|
rcPrFilterAceStatsMatchCountOctets Counter64,
|
|
rcPrFilterAceStatsClear TruthValue
|
|
}
|
|
|
|
rcPrFilterAceStatsAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceStatsEntry, a unique
|
|
identifier for Acl entry in the range of Table Size."
|
|
::= { rcPrFilterAceStatsEntry 1 }
|
|
|
|
rcPrFilterAceStatsAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceStatsEntry, a unique identifier
|
|
for ACE entry in the range of Table Size."
|
|
::= { rcPrFilterAceStatsEntry 2 }
|
|
|
|
rcPrFilterAceStatsPortId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..703)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceStatsEntry, a unique identifier
|
|
of the portId. This object is not being used in
|
|
VSP 9000. It should be alway in VVSP 9000"
|
|
::= { rcPrFilterAceStatsEntry 3 }
|
|
|
|
rcPrFilterAceStatsMatchCountPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Count of packets that match this particular Ace on this
|
|
particular port."
|
|
::= { rcPrFilterAceStatsEntry 4 }
|
|
|
|
rcPrFilterAceStatsMatchCountOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Byte count of traffic that match this particular Ace on
|
|
this particular port"
|
|
::= { rcPrFilterAceStatsEntry 5 }
|
|
|
|
rcPrFilterAceStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear Per-ACE-Per-Port statistics."
|
|
::= { rcPrFilterAceStatsEntry 6 }
|
|
|
|
-- ACE Ethernet Show Table
|
|
|
|
rcPrFilterAceEthShowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceEthShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Ethernet Header
|
|
information of each Ace in context of
|
|
its parent Acl. "
|
|
::= { rcPrFilterAce 25 }
|
|
|
|
rcPrFilterAceEthShowEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceEthShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Ethernet information.
|
|
Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceEthShowAclId,
|
|
rcPrFilterAceEthShowAceId}
|
|
::= { rcPrFilterAceEthShowTable 1 }
|
|
|
|
RcPrFilterAceEthShowEntry ::= SEQUENCE {
|
|
rcPrFilterAceEthShowAclId INTEGER,
|
|
rcPrFilterAceEthShowAceId INTEGER,
|
|
rcPrFilterAceEthShowSrcAddrList OCTET STRING,
|
|
rcPrFilterAceEthShowSrcAddrOper INTEGER,
|
|
rcPrFilterAceEthShowDstAddrList OCTET STRING,
|
|
rcPrFilterAceEthShowDstAddrOper INTEGER,
|
|
rcPrFilterAceEthShowEtherTypeList OCTET STRING,
|
|
rcPrFilterAceEthShowEtherTypeOper INTEGER,
|
|
rcPrFilterAceEthShowVlanTagPrio INTEGER,
|
|
rcPrFilterAceEthShowVlanTagPrioOper INTEGER,
|
|
rcPrFilterAceEthShowPort PortSet,
|
|
rcPrFilterAceEthShowPortOper INTEGER,
|
|
rcPrFilterAceEthShowVlanIdList IdList,
|
|
rcPrFilterAceEthShowVlanIdOper INTEGER,
|
|
rcPrFilterAceEthShowSrcAddrOperMask DisplayString,
|
|
rcPrFilterAceEthShowDstAddrOperMask DisplayString,
|
|
rcPrFilterAceEthShowVlanTagPrioOperMask Integer32,
|
|
rcPrFilterAceEthShowVlanIdOperMask Integer32,
|
|
rcPrFilterAceEthShowVlanId INTEGER
|
|
}
|
|
|
|
rcPrFilterAceEthShowAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthernetEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthShowEntry 1 }
|
|
|
|
rcPrFilterAceEthShowAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceEthernetEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceEthShowEntry 2 }
|
|
|
|
rcPrFilterAceEthShowSrcAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The list of ethernet source address to match."
|
|
::= { rcPrFilterAceEthShowEntry 3 }
|
|
|
|
rcPrFilterAceEthShowSrcAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
mask(8), -- mask
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ethernet Source MAC Address."
|
|
::= { rcPrFilterAceEthShowEntry 4 }
|
|
|
|
rcPrFilterAceEthShowDstAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of ethernet destination address to
|
|
match."
|
|
::= { rcPrFilterAceEthShowEntry 5 }
|
|
|
|
rcPrFilterAceEthShowDstAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
mask(8), -- mask
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ethernet Destination MAC Address."
|
|
::= { rcPrFilterAceEthShowEntry 6 }
|
|
|
|
rcPrFilterAceEthShowEtherTypeList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EtherType value from ethernet header. For example ARP
|
|
uses 0x0806, IP uses 0x0800. The platform support
|
|
determines the behavior for 802.1Q/p tagged packets.
|
|
The EtherType for 802.1Q tagged frames is 0x8100.
|
|
|
|
Valid range for the 16-bit Ether-type is 0..65535
|
|
and the attribute supports lists/ranges of values.
|
|
Invalid ether-type value 65536 is interpreted as
|
|
field is not desired in match criteria."
|
|
::= { rcPrFilterAceEthShowEntry 7 }
|
|
|
|
rcPrFilterAceEthShowEtherTypeOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ethernet Type Operators."
|
|
::= { rcPrFilterAceEthShowEntry 8 }
|
|
|
|
rcPrFilterAceEthShowVlanTagPrio OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
zero(0),
|
|
one(1),
|
|
two(2),
|
|
three(3),
|
|
four(4),
|
|
five(5),
|
|
six(6),
|
|
seven(7),
|
|
notConfigured(254)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Priority bits (3-bit field) from the 802.1Q/p tag."
|
|
::= { rcPrFilterAceEthShowEntry 9 }
|
|
|
|
rcPrFilterAceEthShowVlanTagPrioOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(8), -- mask
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ethernet Vlan Tag Priority."
|
|
::= { rcPrFilterAceEthShowEntry 10 }
|
|
|
|
rcPrFilterAceEthShowPort OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceEthShowEntry 11 }
|
|
|
|
rcPrFilterAceEthShowPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Ethernet Port."
|
|
::= { rcPrFilterAceEthShowEntry 12 }
|
|
|
|
rcPrFilterAceEthShowVlanIdList OBJECT-TYPE
|
|
SYNTAX IdList(SIZE(0..4096))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id to match on. This is a ERS 8600 supported object.
|
|
VSP9000 uses rcPrFilterAceEthShowVlanId instead"
|
|
::= { rcPrFilterAceEthShowEntry 13 }
|
|
|
|
rcPrFilterAceEthShowVlanIdOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(8), -- mask
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Ethernet VlanId."
|
|
::= { rcPrFilterAceEthShowEntry 14 }
|
|
|
|
rcPrFilterAceEthShowSrcAddrOperMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..14))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceEthSrcAddrOper when the option
|
|
selected is mask. It will be empty or
|
|
set to 000000000000 whenrcPrFilterAceEthSrcAddrOper
|
|
is set to 'eq'. In case of the prefix '0x' is
|
|
specified, 14 charaters is max length"
|
|
::= { rcPrFilterAceEthShowEntry 15 }
|
|
|
|
rcPrFilterAceEthShowDstAddrOperMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..14))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceEthDstAddrOper when the option
|
|
selected is mask. It will be empty or
|
|
set to 000000000000 whenrcPrFilterAceEthDstAddrOper
|
|
is set to 'eq'. In case of the prefix '0x' is
|
|
specified, 14 charaters is max length"
|
|
::= { rcPrFilterAceEthShowEntry 16 }
|
|
|
|
rcPrFilterAceEthShowVlanTagPrioOperMask OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'07'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceEthVlanTagPrioOper when the option
|
|
selected is masked. This object is applicable for
|
|
VSP9000. Not for ERS8600"
|
|
::= { rcPrFilterAceEthShowEntry 17 }
|
|
|
|
rcPrFilterAceEthShowVlanIdOperMask OBJECT-TYPE
|
|
SYNTAX Integer32(0..'FFFF'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceEthVlanIdOper when the option
|
|
selected is mask. This object is used with
|
|
rcPrFilterAceEthVlanIdVlanId in VSP 9000 to
|
|
replace rcPrFilterAceEthVlanIdVlanIdList "
|
|
::= { rcPrFilterAceEthShowEntry 18 }
|
|
|
|
rcPrFilterAceEthShowVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4084)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id to match on. VSP9000 use this object with
|
|
object rcPrFilterAceEthVlanIdOperMask to replace the
|
|
rcPrFilterAceEthVlanIdVlanIdList"
|
|
::= { rcPrFilterAceEthShowEntry 19 }
|
|
|
|
-- ACE IP Show Table
|
|
|
|
rcPrFilterAceIpShowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IP Header
|
|
information of each Ace in context of
|
|
its parent Acl. "
|
|
::= { rcPrFilterAce 26 }
|
|
|
|
rcPrFilterAceIpShowEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IP information.
|
|
Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpShowAclId,
|
|
rcPrFilterAceIpShowAceId}
|
|
::= { rcPrFilterAceIpShowTable 1 }
|
|
|
|
RcPrFilterAceIpShowEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpShowAclId INTEGER,
|
|
rcPrFilterAceIpShowAceId INTEGER,
|
|
rcPrFilterAceIpShowSrcAddrList OCTET STRING,
|
|
rcPrFilterAceIpShowSrcAddrOper INTEGER,
|
|
rcPrFilterAceIpShowDstAddrList OCTET STRING,
|
|
rcPrFilterAceIpShowDstAddrOper INTEGER,
|
|
rcPrFilterAceIpShowDscpList OCTET STRING,
|
|
rcPrFilterAceIpShowDscpOper INTEGER,
|
|
rcPrFilterAceIpShowProtoList OCTET STRING,
|
|
rcPrFilterAceIpShowProtoOper INTEGER,
|
|
rcPrFilterAceIpShowOptions INTEGER,
|
|
rcPrFilterAceIpShowOptionsOper INTEGER,
|
|
rcPrFilterAceIpShowFragmentation INTEGER,
|
|
rcPrFilterAceIpShowFragOper INTEGER,
|
|
rcPrFilterAceIpShowSrcAddrIpAddr IpAddress,
|
|
rcPrFilterAceIpShowSrcAddrOperMaskRange IpAddress,
|
|
rcPrFilterAceIpShowDstAddrIpAddr IpAddress,
|
|
rcPrFilterAceIpShowDstAddrOperMaskRange IpAddress,
|
|
rcPrFilterAceIpShowDscpOperMask Integer32
|
|
}
|
|
|
|
rcPrFilterAceIpShowAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpShowEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpShowEntry 1 }
|
|
|
|
rcPrFilterAceIpShowAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpShowEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpShowEntry 2 }
|
|
|
|
rcPrFilterAceIpShowSrcAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The list of ip source address to match from IP
|
|
header. Not applicable to VSP9000"
|
|
::= { rcPrFilterAceIpShowEntry 3 }
|
|
|
|
rcPrFilterAceIpShowSrcAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
prefix(8), -- prefix list
|
|
mask(9), -- mask
|
|
range(10), -- range
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ip Source Address."
|
|
::= { rcPrFilterAceIpShowEntry 4 }
|
|
|
|
rcPrFilterAceIpShowDstAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The list of ip dst address to match from IP header.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceIpShowEntry 5 }
|
|
|
|
rcPrFilterAceIpShowDstAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
prefix(8), -- prefix list
|
|
mask(9), -- mask
|
|
range(10), -- range
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ip Destination Address."
|
|
::= { rcPrFilterAceIpShowEntry 6 }
|
|
|
|
rcPrFilterAceIpShowDscpList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The 6-bit DSCP field from the ToS byte in Ipv4 header
|
|
encodes the PHB information per DiffServ standards
|
|
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
|
|
(like EF) or PHB-class(like AF1 which includes AF11,
|
|
AF12,AF13) to match specific diffserv class traffic.
|
|
Set the field value to desired dscp code for
|
|
'rcPrFilterAceIpDscp' field to match non-standard
|
|
traffic classes and local use PHBs."
|
|
DEFVAL { "disable" }
|
|
::= { rcPrFilterAceIpShowEntry 7 }
|
|
|
|
rcPrFilterAceIpShowDscpOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(8), -- mask
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ip Dscp."
|
|
::= { rcPrFilterAceIpShowEntry 8 }
|
|
|
|
rcPrFilterAceIpShowProtoList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip protocol Type from the ip header to be matched.
|
|
Valid Ip protocol range is 0..255. Few of the Protocol
|
|
Types are enumerated above. In case the desired
|
|
protocol number is not available in the enumerated
|
|
list set protocol to desired integer value"
|
|
::= { rcPrFilterAceIpShowEntry 9 }
|
|
|
|
rcPrFilterAceIpShowProtoOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ip Protocols."
|
|
::= { rcPrFilterAceIpShowEntry 10 }
|
|
|
|
rcPrFilterAceIpShowOptions OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noOperation(1),
|
|
recordRoute(7),
|
|
experimentalMeasurement(10),
|
|
mtuProbe(11),
|
|
mtuReply(12),
|
|
encode(15),
|
|
timestamp(68),
|
|
traceroute(82),
|
|
baseSecurity(130),
|
|
looseSourceRoute(131),
|
|
extendedSecurity(133),
|
|
commercialSecurity(134),
|
|
streamID(136),
|
|
strictSourceRouting(137),
|
|
experimentalAccessControl(142),
|
|
imiTrafficDescriptor(144),
|
|
extendedIP(145),
|
|
addressExtension(147),
|
|
routeAlert(148),
|
|
selectiveDirectedBroadcast(149),
|
|
nsapAddresses(150),
|
|
dynamicPacketState(151),
|
|
upstreamMulticastPacket(152),
|
|
experimentalFlowControl(205)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip options to be matched from the IP Header."
|
|
::= { rcPrFilterAceIpShowEntry 11 }
|
|
|
|
rcPrFilterAceIpShowOptionsOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
any(5),
|
|
notConfigured(254) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Logical Operator - only 'any' is valid at present."
|
|
DEFVAL { any }
|
|
::= { rcPrFilterAceIpShowEntry 12 }
|
|
|
|
rcPrFilterAceIpShowFragmentation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noFragment(0),
|
|
anyFragment(1),
|
|
moreFragment(2),
|
|
unused3(3),
|
|
lastFragment(4),
|
|
unused5(5),
|
|
unused6(6),
|
|
unused7(7),
|
|
notConfigured(254)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ip Fragmentation bits to be matched from the IP
|
|
Header."
|
|
DEFVAL { noFragment }
|
|
::= { rcPrFilterAceIpShowEntry 13 }
|
|
|
|
rcPrFilterAceIpShowFragOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ip fragmentation."
|
|
::= { rcPrFilterAceIpShowEntry 14 }
|
|
|
|
rcPrFilterAceIpShowSrcAddrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP Source Address to match from IP header.
|
|
This object is defined and used to replace
|
|
the rcPrFilterAceIpSrcAddrList by VSP 9000"
|
|
::= { rcPrFilterAceIpShowEntry 15 }
|
|
|
|
rcPrFilterAceIpShowSrcAddrOperMaskRange OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP Mask value or High IP address based on
|
|
object rcPrFilterAceIpSrcAddrOper mask/range
|
|
option is selected."
|
|
::= { rcPrFilterAceIpShowEntry 16 }
|
|
|
|
rcPrFilterAceIpShowDstAddrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP Source Address to match from IP header.
|
|
This object is defined and used to replace
|
|
the rcPrFilterAceIpSrcAddrList by VSP 9000"
|
|
::= { rcPrFilterAceIpShowEntry 17 }
|
|
|
|
rcPrFilterAceIpShowDstAddrOperMaskRange OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The IP mask value or Hi Ip address based on
|
|
object rcPrFilterAceIpDstAddrOper mask/range
|
|
option is selected."
|
|
::= { rcPrFilterAceIpShowEntry 18 }
|
|
|
|
rcPrFilterAceIpShowDscpOperMask OBJECT-TYPE
|
|
SYNTAX Integer32(0..'40'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceIpDscpOper when the option
|
|
selected is mask. It will be set to 0 or be used
|
|
when rcPrFilterAceIpDscpOper is set ro eq"
|
|
::= { rcPrFilterAceIpShowEntry 19 }
|
|
|
|
|
|
-- ACE Proto Show Table
|
|
|
|
rcPrFilterAceProtoShowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Protocol Header
|
|
information of each Ace in context of
|
|
its parent Acl. "
|
|
::= { rcPrFilterAce 27 }
|
|
|
|
rcPrFilterAceProtoShowEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Ethernet information.
|
|
Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoShowAclId,
|
|
rcPrFilterAceProtoShowAceId}
|
|
::= { rcPrFilterAceProtoShowTable 1 }
|
|
|
|
RcPrFilterAceProtoShowEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoShowAclId INTEGER,
|
|
rcPrFilterAceProtoShowAceId INTEGER,
|
|
rcPrFilterAceProtoShowTcpSrcPort OCTET STRING,
|
|
rcPrFilterAceProtoShowTcpSrcPortOper INTEGER,
|
|
rcPrFilterAceProtoShowUdpSrcPort OCTET STRING,
|
|
rcPrFilterAceProtoShowUdpSrcPortOper INTEGER,
|
|
rcPrFilterAceProtoShowTcpDstPort OCTET STRING,
|
|
rcPrFilterAceProtoShowTcpDstPortOper INTEGER,
|
|
rcPrFilterAceProtoShowUdpDstPort OCTET STRING,
|
|
rcPrFilterAceProtoShowUdpDstPortOper INTEGER,
|
|
rcPrFilterAceProtoShowIcmpMsgTypeList OCTET STRING,
|
|
rcPrFilterAceProtoShowIcmpMsgTypeOper INTEGER,
|
|
rcPrFilterAceProtoShowTcpFlagsList OCTET STRING,
|
|
rcPrFilterAceProtoShowTcpFlagsOper INTEGER,
|
|
rcPrFilterAceProtoShowSrcPort OCTET STRING,
|
|
rcPrFilterAceProtoShowSrcPortOper INTEGER,
|
|
rcPrFilterAceProtoShowSrcPortOperMaskRange Integer32,
|
|
rcPrFilterAceProtoShowDstPort OCTET STRING,
|
|
rcPrFilterAceProtoShowDstPortOper INTEGER,
|
|
rcPrFilterAceProtoShowDstPortOperMaskRange Integer32,
|
|
rcPrFilterAceProtoShowTcpFlagsOperMask Integer32,
|
|
rcPrFilterAceProtoShowRoutingTypeType Integer32,
|
|
rcPrFilterAceProtoShowRoutingTypeOper INTEGER,
|
|
rcPrFilterAceProtoShowIcmpv6MsgTypeList OCTET STRING,
|
|
rcPrFilterAceProtoShowIcmpv6MsgTypeOper INTEGER
|
|
}
|
|
|
|
rcPrFilterAceProtoShowAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoShowEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoShowEntry 1 }
|
|
|
|
rcPrFilterAceProtoShowAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoShowEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoShowEntry 2 }
|
|
|
|
rcPrFilterAceProtoShowTcpSrcPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceProtoShowEntry 3 }
|
|
|
|
rcPrFilterAceProtoShowTcpSrcPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol TcpSrcPort.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceProtoShowEntry 4 }
|
|
|
|
rcPrFilterAceProtoShowUdpSrcPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceProtoShowEntry 5 }
|
|
|
|
rcPrFilterAceProtoShowUdpSrcPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol UdpSrcPort.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceProtoShowEntry 6 }
|
|
|
|
rcPrFilterAceProtoShowTcpDstPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceProtoShowEntry 7 }
|
|
|
|
rcPrFilterAceProtoShowTcpDstPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol TcpDstPort.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceProtoShowEntry 8 }
|
|
|
|
rcPrFilterAceProtoShowUdpDstPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceProtoShowEntry 9 }
|
|
|
|
rcPrFilterAceProtoShowUdpDstPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol UdpDstPort.
|
|
Not applicable to VSP9000"
|
|
::= { rcPrFilterAceProtoShowEntry 10 }
|
|
|
|
rcPrFilterAceProtoShowIcmpMsgTypeList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "One or a list of Icmp messages to be matched.
|
|
Need to provide strings, number of protocol header
|
|
types (pre-defined values plus user-defined headers).
|
|
Valid range is 0 to 255 (reserved)."
|
|
::= { rcPrFilterAceProtoShowEntry 11 }
|
|
|
|
rcPrFilterAceProtoShowIcmpMsgTypeOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol IcmpMsgTypes."
|
|
::= { rcPrFilterAceProtoShowEntry 12 }
|
|
|
|
rcPrFilterAceProtoShowTcpFlagsList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "One or a list of Tcp flags to be matched.
|
|
Need to provide strings, number of protocol header
|
|
types (pre-defined values plus user-defined headers).
|
|
Valid range is 0 to 63"
|
|
::= { rcPrFilterAceProtoShowEntry 13 }
|
|
|
|
rcPrFilterAceProtoShowTcpFlagsOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1),
|
|
matchAny(6),
|
|
matchAll(7),
|
|
mask(8),
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol TcpFlags."
|
|
::= { rcPrFilterAceProtoShowEntry 14 }
|
|
|
|
rcPrFilterAceProtoShowSrcPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceProtoShowEntry 15 }
|
|
|
|
rcPrFilterAceProtoShowSrcPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
mask(8),
|
|
range(9),
|
|
notConfigured(254)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol SrcPort."
|
|
::= { rcPrFilterAceProtoShowEntry 16 }
|
|
|
|
rcPrFilterAceProtoShowSrcPortOperMaskRange OBJECT-TYPE
|
|
SYNTAX Integer32(0..'FFFF'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value should be displayed in hex when
|
|
rcPrFilterAceProtoSrcPortOper is set to 'mask'.
|
|
This object will be used as a Range high value when
|
|
rcPrFilterAceProtoSrcPortOper is set to 'range'.
|
|
('range' is not supported in this 3.0 release).
|
|
If it is used as range high value, it should be
|
|
displayed in decimal formtat.
|
|
This object will be set to 0 when
|
|
rcPrFilterAceProtoSrcPortOper is set to 'eq'"
|
|
::= { rcPrFilterAceProtoShowEntry 17 }
|
|
|
|
rcPrFilterAceProtoShowDstPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceProtoShowEntry 18 }
|
|
|
|
rcPrFilterAceProtoShowDstPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
mask(8),
|
|
range(9),
|
|
notConfigured(254)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol DstPort."
|
|
::= { rcPrFilterAceProtoShowEntry 19 }
|
|
|
|
rcPrFilterAceProtoShowDstPortOperMaskRange OBJECT-TYPE
|
|
SYNTAX Integer32(0..'FFFF'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value should be displayed in hex when
|
|
rcPrFilterAceProtoDstPortOper is set to 'mask'.
|
|
This object will be used as a Range high value when
|
|
rcPrFilterAceProtoDstPortOper is set to 'range'.
|
|
('range' is not supported in this 3.0 release).
|
|
If it is used as range high value, it should be
|
|
displayed in decimal formtat.
|
|
This object will be set to 0 when
|
|
rcPrFilterAceProtoDstPortOper is set to 'eq'"
|
|
::= { rcPrFilterAceProtoShowEntry 20 }
|
|
|
|
rcPrFilterAceProtoShowTcpFlagsOperMask OBJECT-TYPE
|
|
SYNTAX Integer32(0..'3F'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mask value in hex which can be set for the
|
|
rcPrFilterAceProtoTcpFlagsOper when the option
|
|
selected is mask. It will be set 0x0 when object
|
|
rcPrFilterAceProtoTcpFlagsOper is set to eq"
|
|
::= { rcPrFilterAceProtoShowEntry 21 }
|
|
|
|
rcPrFilterAceProtoShowRoutingTypeType OBJECT-TYPE
|
|
SYNTAX Integer32(0..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Value of Protocol routing-type."
|
|
::= { rcPrFilterAceProtoShowEntry 22 }
|
|
|
|
rcPrFilterAceProtoShowRoutingTypeOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol RoutingType."
|
|
::= { rcPrFilterAceProtoShowEntry 23 }
|
|
|
|
rcPrFilterAceProtoShowIcmpv6MsgTypeList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "One or a list of ICMPv6 messages to be matched.
|
|
Need to provide strings, number of protocol header
|
|
types (pre-defined values plus user-defined headers).
|
|
Valid range is 0 to 255 (reserved)."
|
|
::= { rcPrFilterAceProtoShowEntry 24 }
|
|
|
|
rcPrFilterAceProtoShowIcmpv6MsgTypeOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
notConfigured(254), -- not provisioned
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol Icmpv6MsgTypes."
|
|
::= { rcPrFilterAceProtoShowEntry 25 }
|
|
|
|
-- ACE Pattern Show Table
|
|
|
|
rcPrFilterAcePatternShowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAcePatternShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store Pattern 1, 2, 3
|
|
Header information of each Ace in context of
|
|
its parent Acl. "
|
|
::= { rcPrFilterAce 28 }
|
|
|
|
rcPrFilterAcePatternShowEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAcePatternShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace Pattern 1, 2, 3
|
|
information. Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAcePatternShowAclId,
|
|
rcPrFilterAcePatternShowAceId}
|
|
::= { rcPrFilterAcePatternShowTable 1 }
|
|
|
|
RcPrFilterAcePatternShowEntry ::= SEQUENCE {
|
|
rcPrFilterAcePatternShowAclId INTEGER,
|
|
rcPrFilterAcePatternShowAceId INTEGER,
|
|
rcPrFilterAcePatternShowPattern1Name DisplayString,
|
|
rcPrFilterAcePatternShowPattern1Value OCTET STRING,
|
|
rcPrFilterAcePatternShowPattern1Oper INTEGER,
|
|
rcPrFilterAcePatternShowPattern2Name DisplayString,
|
|
rcPrFilterAcePatternShowPattern2Value OCTET STRING,
|
|
rcPrFilterAcePatternShowPattern2Oper INTEGER,
|
|
rcPrFilterAcePatternShowPattern3Name DisplayString,
|
|
rcPrFilterAcePatternShowPattern3Value OCTET STRING,
|
|
rcPrFilterAcePatternShowPattern3Oper INTEGER
|
|
}
|
|
|
|
rcPrFilterAcePatternShowAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AcePatternEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAcePatternShowEntry 1 }
|
|
|
|
rcPrFilterAcePatternShowAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AcePatternEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAcePatternShowEntry 2 }
|
|
|
|
rcPrFilterAcePatternShowPattern1Name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator for
|
|
the Ace Pattern Entry."
|
|
::= { rcPrFilterAcePatternShowEntry 3 }
|
|
|
|
rcPrFilterAcePatternShowPattern1Value OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Set the pattern value as numeric string. The numeric
|
|
value of each byte is encoded in one octet of the
|
|
string. Unused bytes are left at the trailing end of
|
|
string. The number of bytes to extract from this string
|
|
is set in rcPrFilterActPatternLength."
|
|
DEFVAL { "" }
|
|
::= { rcPrFilterAcePatternShowEntry 4 }
|
|
|
|
rcPrFilterAcePatternShowPattern1Oper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Pattern."
|
|
::= { rcPrFilterAcePatternShowEntry 5 }
|
|
|
|
rcPrFilterAcePatternShowPattern2Name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator for
|
|
the Ace Pattern Entry."
|
|
::= { rcPrFilterAcePatternShowEntry 6 }
|
|
|
|
rcPrFilterAcePatternShowPattern2Value OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Set the pattern value as numeric string. The numeric
|
|
value of each byte is encoded in one octet of the
|
|
string. Unused bytes are left at the trailing end of
|
|
string. The number of bytes to extract from this string
|
|
is set in rcPrFilterActPatternLength."
|
|
DEFVAL { "" }
|
|
::= { rcPrFilterAcePatternShowEntry 7 }
|
|
|
|
rcPrFilterAcePatternShowPattern2Oper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Pattern."
|
|
::= { rcPrFilterAcePatternShowEntry 8 }
|
|
|
|
rcPrFilterAcePatternShowPattern3Name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A descriptive name chosen by the administrator for
|
|
the Ace Pattern Entry."
|
|
::= { rcPrFilterAcePatternShowEntry 9 }
|
|
|
|
rcPrFilterAcePatternShowPattern3Value OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Set the pattern value as numeric string. The numeric
|
|
value of each byte is encoded in one octet of the
|
|
string. Unused bytes are left at the trailing end of
|
|
string. The number of bytes to extract from this string
|
|
is set in rcPrFilterActPatternLength."
|
|
DEFVAL { "" }
|
|
::= { rcPrFilterAcePatternShowEntry 10 }
|
|
|
|
rcPrFilterAcePatternShowPattern3Oper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
le(3), -- less than or equal to
|
|
ge(4), -- greater than or equal to
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Pattern."
|
|
::= { rcPrFilterAcePatternShowEntry 11 }
|
|
|
|
-- ACE Ipv6 Source Address Table
|
|
|
|
rcPrFilterAceIpv6SrcAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpv6SrcAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IPv6 Source Address Header
|
|
information of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 29 }
|
|
|
|
rcPrFilterAceIpv6SrcAddrEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpv6SrcAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IPv6 Source Address Header
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpv6SrcAddrAclId,
|
|
rcPrFilterAceIpv6SrcAddrAceId }
|
|
::= { rcPrFilterAceIpv6SrcAddrTable 1 }
|
|
|
|
RcPrFilterAceIpv6SrcAddrEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpv6SrcAddrAclId INTEGER,
|
|
rcPrFilterAceIpv6SrcAddrAceId INTEGER,
|
|
rcPrFilterAceIpv6SrcAddrList OCTET STRING,
|
|
rcPrFilterAceIpv6SrcAddrListCount INTEGER,
|
|
rcPrFilterAceIpv6SrcAddrOper INTEGER,
|
|
rcPrFilterAceIpv6SrcAddrRowStatus RowStatus,
|
|
rcPrFilterAceIpv6SrcAddrOperMask OCTET STRING
|
|
}
|
|
|
|
rcPrFilterAceIpv6SrcAddrAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6SrcAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6SrcAddrEntry 1 }
|
|
|
|
rcPrFilterAceIpv6SrcAddrAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6SrcAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6SrcAddrEntry 2 }
|
|
|
|
rcPrFilterAceIpv6SrcAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The list of ipv6 source address to match from IPv6
|
|
header."
|
|
::= { rcPrFilterAceIpv6SrcAddrEntry 3 }
|
|
|
|
rcPrFilterAceIpv6SrcAddrListCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the ipv6 src address."
|
|
::= { rcPrFilterAceIpv6SrcAddrEntry 4 }
|
|
|
|
rcPrFilterAceIpv6SrcAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ipv6 Source Address."
|
|
::= { rcPrFilterAceIpv6SrcAddrEntry 5 }
|
|
|
|
rcPrFilterAceIpv6SrcAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpv6SrcAddrEntry 6 }
|
|
|
|
rcPrFilterAceIpv6SrcAddrOperMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The ipv6 mask value when rcPrFilterAceIpv6SrcAddrOper mask is selected."
|
|
::= { rcPrFilterAceIpv6SrcAddrEntry 7 }
|
|
|
|
-- ACE Ipv6 Destination Address Table
|
|
|
|
rcPrFilterAceIpv6DstAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpv6DstAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IPv6 Destination Address
|
|
Header information of each Ace in context of its
|
|
parent Acl."
|
|
::= { rcPrFilterAce 30 }
|
|
|
|
rcPrFilterAceIpv6DstAddrEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpv6DstAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IPv6 Destination Address
|
|
Header information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpv6DstAddrAclId,
|
|
rcPrFilterAceIpv6DstAddrAceId }
|
|
::= { rcPrFilterAceIpv6DstAddrTable 1 }
|
|
|
|
RcPrFilterAceIpv6DstAddrEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpv6DstAddrAclId INTEGER,
|
|
rcPrFilterAceIpv6DstAddrAceId INTEGER,
|
|
rcPrFilterAceIpv6DstAddrList OCTET STRING,
|
|
rcPrFilterAceIpv6DstAddrListCount INTEGER,
|
|
rcPrFilterAceIpv6DstAddrOper INTEGER,
|
|
rcPrFilterAceIpv6DstAddrRowStatus RowStatus,
|
|
rcPrFilterAceIpv6DstAddrOperMask OCTET STRING
|
|
}
|
|
|
|
rcPrFilterAceIpv6DstAddrAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6DstAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6DstAddrEntry 1 }
|
|
|
|
rcPrFilterAceIpv6DstAddrAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6DstAddrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6DstAddrEntry 2 }
|
|
|
|
rcPrFilterAceIpv6DstAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The list of ipv6 dst address to match from IPv6 header."
|
|
::= { rcPrFilterAceIpv6DstAddrEntry 3 }
|
|
|
|
rcPrFilterAceIpv6DstAddrListCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the IPv6 Destination Address."
|
|
::= { rcPrFilterAceIpv6DstAddrEntry 4 }
|
|
|
|
rcPrFilterAceIpv6DstAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace IPv6 Destination Address."
|
|
::= { rcPrFilterAceIpv6DstAddrEntry 5 }
|
|
|
|
rcPrFilterAceIpv6DstAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpv6DstAddrEntry 6 }
|
|
|
|
rcPrFilterAceIpv6DstAddrOperMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The ipv6 mask value when rcPrFilterAceIpv6DstAddrOper mask is selected."
|
|
::= { rcPrFilterAceIpv6DstAddrEntry 7 }
|
|
|
|
-- ACE Ipv6 Next header Table
|
|
|
|
rcPrFilterAceIpv6NextHdrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpv6NextHdrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IPv6 Next header
|
|
Header information of each Ace in context of its
|
|
parent Acl."
|
|
::= { rcPrFilterAce 31 }
|
|
|
|
rcPrFilterAceIpv6NextHdrEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpv6NextHdrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IPv6 Next header
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpv6NextHdrAclId,
|
|
rcPrFilterAceIpv6NextHdrAceId }
|
|
::= { rcPrFilterAceIpv6NextHdrTable 1 }
|
|
|
|
RcPrFilterAceIpv6NextHdrEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpv6NextHdrAclId INTEGER,
|
|
rcPrFilterAceIpv6NextHdrAceId INTEGER,
|
|
rcPrFilterAceIpv6NextHdrNextHdr Ipv6NextHdr,
|
|
rcPrFilterAceIpv6NextHdrOper INTEGER,
|
|
rcPrFilterAceIpv6NextHdrRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceIpv6NextHdrAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6NextHdrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6NextHdrEntry 1 }
|
|
|
|
rcPrFilterAceIpv6NextHdrAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6NextHdrEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6NextHdrEntry 2 }
|
|
|
|
rcPrFilterAceIpv6NextHdrNextHdr OBJECT-TYPE
|
|
SYNTAX Ipv6NextHdr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The ipv6 next header to look for."
|
|
::= { rcPrFilterAceIpv6NextHdrEntry 3 }
|
|
|
|
rcPrFilterAceIpv6NextHdrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2) -- not equal
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace IPv6 Next header."
|
|
::= { rcPrFilterAceIpv6NextHdrEntry 4 }
|
|
|
|
rcPrFilterAceIpv6NextHdrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpv6NextHdrEntry 5 }
|
|
|
|
-- ACE IPv6 Show Table
|
|
|
|
rcPrFilterAceIpv6ShowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpv6ShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to display ipv6
|
|
information of each Ace in context of
|
|
its parent Acl. "
|
|
::= { rcPrFilterAce 32 }
|
|
|
|
rcPrFilterAceIpv6ShowEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpv6ShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace ipv6 information.
|
|
Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpv6ShowAclId,
|
|
rcPrFilterAceIpv6ShowAceId}
|
|
::= { rcPrFilterAceIpv6ShowTable 1 }
|
|
|
|
RcPrFilterAceIpv6ShowEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpv6ShowAclId INTEGER,
|
|
rcPrFilterAceIpv6ShowAceId INTEGER,
|
|
rcPrFilterAceIpv6ShowSrcAddrList OCTET STRING,
|
|
rcPrFilterAceIpv6ShowSrcAddrOper INTEGER,
|
|
rcPrFilterAceIpv6ShowDstAddrList OCTET STRING,
|
|
rcPrFilterAceIpv6ShowDstAddrOper INTEGER,
|
|
rcPrFilterAceIpv6ShowNxtHdrNxtHdr Ipv6NextHdr,
|
|
rcPrFilterAceIpv6ShowNxtHdrOper INTEGER,
|
|
rcPrFilterAceIpv6ShowTrafficClsOper INTEGER,
|
|
rcPrFilterAceIpv6ShowTrafficCls INTEGER,
|
|
rcPrFilterAceIpv6ShowSrcAddrMask OCTET STRING,
|
|
rcPrFilterAceIpv6ShowDstAddrMask OCTET STRING
|
|
}
|
|
|
|
rcPrFilterAceIpv6ShowAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6Entry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6ShowEntry 1 }
|
|
|
|
rcPrFilterAceIpv6ShowAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6Entry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6ShowEntry 2 }
|
|
|
|
rcPrFilterAceIpv6ShowSrcAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The list of Ipv6 source address to display."
|
|
::= { rcPrFilterAceIpv6ShowEntry 3 }
|
|
|
|
rcPrFilterAceIpv6ShowSrcAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(3),
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ipv6 Source Address."
|
|
::= { rcPrFilterAceIpv6ShowEntry 4 }
|
|
|
|
rcPrFilterAceIpv6ShowDstAddrList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of Ipv6 destination address to display."
|
|
::= { rcPrFilterAceIpv6ShowEntry 5 }
|
|
|
|
rcPrFilterAceIpv6ShowDstAddrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
mask(3),
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace Ipv6 Destination Address."
|
|
::= { rcPrFilterAceIpv6ShowEntry 6 }
|
|
|
|
rcPrFilterAceIpv6ShowNxtHdrNxtHdr OBJECT-TYPE
|
|
SYNTAX Ipv6NextHdr
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 next hdr to display."
|
|
::= { rcPrFilterAceIpv6ShowEntry 7 }
|
|
|
|
rcPrFilterAceIpv6ShowNxtHdrOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
ne(2), -- not equal
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Ipv6 next hdr."
|
|
::= { rcPrFilterAceIpv6ShowEntry 8 }
|
|
|
|
rcPrFilterAceIpv6ShowTrafficClsOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
any(255) -- not provisioned
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Ipv6 Traffic Class"
|
|
::= { rcPrFilterAceIpv6ShowEntry 9 }
|
|
|
|
rcPrFilterAceIpv6ShowTrafficCls OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 traffic class value to display."
|
|
::= { rcPrFilterAceIpv6ShowEntry 10 }
|
|
|
|
rcPrFilterAceIpv6ShowSrcAddrMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ipv6 SrcAddr Mask value to display."
|
|
::= { rcPrFilterAceIpv6ShowEntry 11 }
|
|
|
|
rcPrFilterAceIpv6ShowDstAddrMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ipv6 DstAddr Mask value to display."
|
|
::= { rcPrFilterAceIpv6ShowEntry 12 }
|
|
|
|
|
|
-- ACE Protocol TCP/UDP Src Port Table
|
|
|
|
rcPrFilterAceProtoSrcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store TCP/UDP Source Port information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 33 }
|
|
|
|
rcPrFilterAceProtoSrcPortEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace Protocol TCP/UDP Source Port
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoSrcPortAclId,
|
|
rcPrFilterAceProtoSrcPortAceId }
|
|
::= { rcPrFilterAceProtoSrcPortTable 1 }
|
|
|
|
RcPrFilterAceProtoSrcPortEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoSrcPortAclId INTEGER,
|
|
rcPrFilterAceProtoSrcPortAceId INTEGER,
|
|
rcPrFilterAceProtoSrcPortPort OCTET STRING,
|
|
rcPrFilterAceProtoSrcPortCount INTEGER,
|
|
rcPrFilterAceProtoSrcPortOper INTEGER,
|
|
rcPrFilterAceProtoSrcPortRowStatus RowStatus,
|
|
rcPrFilterAceProtoSrcPortOperMaskRange Integer32
|
|
}
|
|
|
|
rcPrFilterAceProtoSrcPortAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoSrcPortEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoSrcPortEntry 1 }
|
|
|
|
rcPrFilterAceProtoSrcPortAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoSrcPortEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoSrcPortEntry 2 }
|
|
|
|
rcPrFilterAceProtoSrcPortPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceProtoSrcPortEntry 3 }
|
|
|
|
rcPrFilterAceProtoSrcPortCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the TCP source port."
|
|
::= { rcPrFilterAceProtoSrcPortEntry 4 }
|
|
|
|
rcPrFilterAceProtoSrcPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
mask(8),
|
|
range(9)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol SrcPort."
|
|
::= { rcPrFilterAceProtoSrcPortEntry 5 }
|
|
|
|
rcPrFilterAceProtoSrcPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoSrcPortEntry 6 }
|
|
|
|
rcPrFilterAceProtoSrcPortOperMaskRange OBJECT-TYPE
|
|
SYNTAX Integer32(0..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value should be displayed in hex when
|
|
rcPrFilterAceProtoSrcPortOper is set to 'mask'.
|
|
This object will be used as a Range high value when
|
|
rcPrFilterAceProtoSrcPortOper is set to 'range'.
|
|
('range' is not supported in this 3.0 release).
|
|
If it is used as range high value, it should be
|
|
displayed in decimal formtat.
|
|
This object will be set to 0 when
|
|
rcPrFilterAceProtoSrcPortOper is set to 'eq'"
|
|
::= { rcPrFilterAceProtoSrcPortEntry 7 }
|
|
|
|
-- ACE Protocol TCP/UDP DstPort Table
|
|
|
|
rcPrFilterAceProtoDstPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoDstPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store TCP Dest Port information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 34 }
|
|
|
|
rcPrFilterAceProtoDstPortEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoDstPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace Protocol TCP Dest Port
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoDstPortAclId,
|
|
rcPrFilterAceProtoDstPortAceId }
|
|
::= { rcPrFilterAceProtoDstPortTable 1 }
|
|
|
|
RcPrFilterAceProtoDstPortEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoDstPortAclId INTEGER,
|
|
rcPrFilterAceProtoDstPortAceId INTEGER,
|
|
rcPrFilterAceProtoDstPortPort OCTET STRING,
|
|
rcPrFilterAceProtoDstPortCount INTEGER,
|
|
rcPrFilterAceProtoDstPortOper INTEGER,
|
|
rcPrFilterAceProtoDstPortRowStatus RowStatus,
|
|
rcPrFilterAceProtoDstPortOperMaskRange Integer32
|
|
}
|
|
|
|
rcPrFilterAceProtoDstPortAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoDstPortEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoDstPortEntry 1 }
|
|
|
|
rcPrFilterAceProtoDstPortAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoDstPortEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoDstPortEntry 2 }
|
|
|
|
rcPrFilterAceProtoDstPortPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port Number or Port List to match on."
|
|
::= { rcPrFilterAceProtoDstPortEntry 3 }
|
|
|
|
rcPrFilterAceProtoDstPortCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the TCP dest port."
|
|
::= { rcPrFilterAceProtoDstPortEntry 4 }
|
|
|
|
rcPrFilterAceProtoDstPortOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1), -- exact match
|
|
mask(8),
|
|
range(9)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol DstPort."
|
|
::= { rcPrFilterAceProtoDstPortEntry 5 }
|
|
|
|
rcPrFilterAceProtoDstPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoDstPortEntry 6 }
|
|
|
|
rcPrFilterAceProtoDstPortOperMaskRange OBJECT-TYPE
|
|
SYNTAX Integer32(0..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value should be displayed in hex when
|
|
rcPrFilterAceProtoDstPortOper is set to 'mask'.
|
|
This object will be used as a Range high value when
|
|
rcPrFilterAceProtoDstPortOper is set to 'range'.
|
|
('range' is not supported in this 3.0 release).
|
|
If it is used as range high value, it should be
|
|
displayed in decimal formtat.
|
|
This object will be set to 0 when
|
|
rcPrFilterAceProtoDstPortOper is set to 'eq'"
|
|
::= { rcPrFilterAceProtoDstPortEntry 7 }
|
|
|
|
|
|
-- ACE Protocol Tcp-Option table
|
|
|
|
rcPrFilterAceProtoTcpOptionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoTcpOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store TCP Option information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 35 }
|
|
|
|
rcPrFilterAceProtoTcpOptionEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoTcpOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace Protocol TCP option
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoTcpOptionAclId,
|
|
rcPrFilterAceProtoTcpOptionAceId }
|
|
::= { rcPrFilterAceProtoTcpOptionTable 1 }
|
|
|
|
|
|
RcPrFilterAceProtoTcpOptionEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoTcpOptionAclId INTEGER,
|
|
rcPrFilterAceProtoTcpOptionAceId INTEGER,
|
|
rcPrFilterAceProtoTcpOptionHeader INTEGER,
|
|
rcPrFilterAceProtoTcpOptionOper INTEGER,
|
|
rcPrFilterAceProtoTcpOptionRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceProtoTcpOptionAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the rcPrFilterAceProtoTcpOptionEntry,
|
|
a unique identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoTcpOptionEntry 1 }
|
|
|
|
rcPrFilterAceProtoTcpOptionAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index to the rcPrFilterAceProtoTcpOptionEntry,
|
|
a unique identifier for Ace entry in the
|
|
range of Table Size."
|
|
::= { rcPrFilterAceProtoTcpOptionEntry 2 }
|
|
|
|
rcPrFilterAceProtoTcpOptionHeader OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no-operation(1),
|
|
max-segment-size(2),
|
|
wsopt(3),
|
|
sack-permitted(4),
|
|
sack(5),
|
|
tsopt(8),
|
|
partial-order-conn-perm(9),
|
|
partial-order-service-profile(10),
|
|
cc(11),
|
|
cc-new(12),
|
|
cc-echo(13),
|
|
tcp-alt-checksum-req(14),
|
|
tcp-alt-checksum-data(15),
|
|
md5(19),
|
|
quick-start-resp(27),
|
|
user-timeout-opt(28)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TCP options to be matched from the TCP Header.
|
|
1 No-Operation
|
|
2 MaximumSegmentSize
|
|
3 WSOPT - Window Scale
|
|
4 SACK Permitted
|
|
5 SACK
|
|
8 TSOPT - Time Stamp Option
|
|
9 Partial Order Connection Permitted
|
|
10 Partial Order Service Profile
|
|
11 CC
|
|
12 CC.NEW
|
|
13 CC.ECHO
|
|
14 TCP Alternate Checksum Request
|
|
15 TCP Alternate Checksum Data
|
|
19 MD5 Signature Option
|
|
27 Quick-Start Response
|
|
28 User Timeout Option "
|
|
::= {rcPrFilterAceProtoTcpOptionEntry 3 }
|
|
|
|
rcPrFilterAceProtoTcpOptionOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
any(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Logical Operator - only 'any' is valid at present."
|
|
DEFVAL { any }
|
|
::= {rcPrFilterAceProtoTcpOptionEntry 4 }
|
|
|
|
rcPrFilterAceProtoTcpOptionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoTcpOptionEntry 5 }
|
|
|
|
-- ACE Ipv6 Traffic class Table
|
|
|
|
rcPrFilterAceIpv6TrafficClsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceIpv6TrafficClsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store IPv6 Traffic Class
|
|
Header information of each Ace in context of its
|
|
parent Acl."
|
|
::= { rcPrFilterAce 36 }
|
|
|
|
rcPrFilterAceIpv6TrafficClsEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceIpv6TrafficClsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IPv6 Traffic Class
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceIpv6TrafficClsAclId,
|
|
rcPrFilterAceIpv6TrafficClsAceId }
|
|
::= { rcPrFilterAceIpv6TrafficClsTable 1 }
|
|
|
|
RcPrFilterAceIpv6TrafficClsEntry ::= SEQUENCE {
|
|
rcPrFilterAceIpv6TrafficClsAclId INTEGER,
|
|
rcPrFilterAceIpv6TrafficClsAceId INTEGER,
|
|
rcPrFilterAceIpv6TrafficClsRowStatus RowStatus,
|
|
rcPrFilterAceIpv6TrafficClsOper INTEGER,
|
|
rcPrFilterAceIpv6TrafficClsTrafficCls INTEGER
|
|
}
|
|
rcPrFilterAceIpv6TrafficClsAclId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2048)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6TrafficClsEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6TrafficClsEntry 1 }
|
|
|
|
rcPrFilterAceIpv6TrafficClsAceId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceIpv6TrafficClsEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceIpv6TrafficClsEntry 2 }
|
|
|
|
rcPrFilterAceIpv6TrafficClsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceIpv6TrafficClsEntry 3 }
|
|
|
|
rcPrFilterAceIpv6TrafficClsOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1) -- exact match
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace IPv6 Traffic Class"
|
|
::= { rcPrFilterAceIpv6TrafficClsEntry 4 }
|
|
|
|
rcPrFilterAceIpv6TrafficClsTrafficCls OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 Traffic Class value"
|
|
DEFVAL { 0 }
|
|
::= { rcPrFilterAceIpv6TrafficClsEntry 5 }
|
|
|
|
-- ACE Protocol RoutingType table
|
|
|
|
rcPrFilterAceProtoRoutingTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoRoutingTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Ace's to store IPv6 Routing header type
|
|
information of each Ace in context of its
|
|
parent Acl."
|
|
::= { rcPrFilterAce 37 }
|
|
|
|
rcPrFilterAceProtoRoutingTypeEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoRoutingTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Ace entry holding Ace IPv6 routing header type
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoRoutingTypeAclId,
|
|
rcPrFilterAceProtoRoutingTypeAceId }
|
|
::= { rcPrFilterAceProtoRoutingTypeTable 1 }
|
|
|
|
RcPrFilterAceProtoRoutingTypeEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoRoutingTypeAclId Integer32,
|
|
rcPrFilterAceProtoRoutingTypeAceId Integer32,
|
|
rcPrFilterAceProtoRoutingTypeType Integer32,
|
|
rcPrFilterAceProtoRoutingTypeOper INTEGER,
|
|
rcPrFilterAceProtoRoutingTypeRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceProtoRoutingTypeAclId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2048)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoRoutingTypeEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoRoutingTypeEntry 1 }
|
|
|
|
rcPrFilterAceProtoRoutingTypeAceId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoRoutingTypeEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoRoutingTypeEntry 2 }
|
|
|
|
rcPrFilterAceProtoRoutingTypeType OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The ipv6 routing header type to look for."
|
|
::= { rcPrFilterAceProtoRoutingTypeEntry 3 }
|
|
|
|
rcPrFilterAceProtoRoutingTypeOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1) -- exact match
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Operators for Ace IPv6 routing header type."
|
|
::= { rcPrFilterAceProtoRoutingTypeEntry 4 }
|
|
|
|
rcPrFilterAceProtoRoutingTypeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoRoutingTypeEntry 5 }
|
|
|
|
-- ACE Protocol Icmpv6MsgType table
|
|
|
|
rcPrFilterAceProtoIcmpv6MsgTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPrFilterAceProtoIcmpv6MsgTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Aces to store ICMPv6 message type information
|
|
of each Ace in context of its parent Acl."
|
|
::= { rcPrFilterAce 38 }
|
|
|
|
rcPrFilterAceProtoIcmpv6MsgTypeEntry OBJECT-TYPE
|
|
SYNTAX RcPrFilterAceProtoIcmpv6MsgTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holding Ace ICMPv6 message type
|
|
information. An Ace is a member of one Acl."
|
|
INDEX { rcPrFilterAceProtoIcmpv6MsgTypeAclId,
|
|
rcPrFilterAceProtoIcmpv6MsgTypeAceId }
|
|
::= { rcPrFilterAceProtoIcmpv6MsgTypeTable 1 }
|
|
|
|
RcPrFilterAceProtoIcmpv6MsgTypeEntry ::= SEQUENCE {
|
|
rcPrFilterAceProtoIcmpv6MsgTypeAclId Integer32,
|
|
rcPrFilterAceProtoIcmpv6MsgTypeAceId Integer32,
|
|
rcPrFilterAceProtoIcmpv6MsgTypeList OCTET STRING,
|
|
rcPrFilterAceProtoIcmpv6MsgTypeCount Integer32,
|
|
rcPrFilterAceProtoIcmpv6MsgTypeOper INTEGER,
|
|
rcPrFilterAceProtoIcmpv6MsgTypeRowStatus RowStatus
|
|
}
|
|
|
|
rcPrFilterAceProtoIcmpv6MsgTypeAclId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2048)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoIcmpv6MsgTypeEntry, a unique
|
|
identifier for Acl entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoIcmpv6MsgTypeEntry 1 }
|
|
|
|
rcPrFilterAceProtoIcmpv6MsgTypeAceId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index to the AceProtoIcmpv6MsgTypeEntry, a unique
|
|
identifier for Ace entry in the range of Table
|
|
Size."
|
|
::= { rcPrFilterAceProtoIcmpv6MsgTypeEntry 2 }
|
|
|
|
rcPrFilterAceProtoIcmpv6MsgTypeList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "One or a list of ICMPv6 messages to be matched.
|
|
Need to provide strings, number of protocol header
|
|
types (pre-defined values plus user-defined headers).
|
|
Valid range is 0 to 255 (reserved)."
|
|
::= { rcPrFilterAceProtoIcmpv6MsgTypeEntry 3 }
|
|
|
|
rcPrFilterAceProtoIcmpv6MsgTypeCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Count to store the number of discrete ranges
|
|
entered for the ICMP message types."
|
|
::= { rcPrFilterAceProtoIcmpv6MsgTypeEntry 4 }
|
|
|
|
rcPrFilterAceProtoIcmpv6MsgTypeOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eq(1) -- exact match
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Operator for Ace Protocol Icmpv6MsgTypes."
|
|
::= { rcPrFilterAceProtoIcmpv6MsgTypeEntry 5 }
|
|
|
|
rcPrFilterAceProtoIcmpv6MsgTypeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Create/delete operations for this entry."
|
|
::= { rcPrFilterAceProtoIcmpv6MsgTypeEntry 6 }
|
|
|
|
--
|
|
-- The MIB module is the definition of the managed objects for the Virtual Router.
|
|
-- These are virtual router mibs extracted from draft-ietf-l3vpn-vr-mib-04.txt
|
|
--
|
|
|
|
--
|
|
-- Textual conventions
|
|
--
|
|
|
|
|
|
VPNId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The purpose of a VPN-ID is to uniquely identify a VPN.
|
|
The Global VPN Identifier format is:
|
|
3 octet VPN Authority, Organizationally Unique Identifier
|
|
followed by 4 octet VPN index identifying VPN according
|
|
to OUI"
|
|
REFERENCE
|
|
"Fox, B. and Gleeson, B., 'Virtual Private Networks
|
|
Identifier', RFC 2685, September 1999."
|
|
SYNTAX OCTET STRING (SIZE (7))
|
|
|
|
VrfRpTriggerBitCode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Routing Protocol (RP)
|
|
Triggers on a Virtual Router. The BITS
|
|
represent an Action-code that specifies the
|
|
action on the Routing Protocols.
|
|
|
|
The actions are: initiate or shutdown.
|
|
|
|
When encoding the RP using the BITS construct,
|
|
the value is encoded as an OCTET STRING where
|
|
the first bit (bit 0) is the highest bit of the
|
|
octet.
|
|
|
|
Bits 0-3 may be specified in any combination to
|
|
allow multiple Routing Protocols to be acted on
|
|
simultaneously or individually.
|
|
"
|
|
SYNTAX BITS {
|
|
rip (0),
|
|
ospf(1),
|
|
bgp (2),
|
|
isis(3), -- not supported on 8600
|
|
pim (4),
|
|
mvr (5),
|
|
pim6 (6),
|
|
msdp (7)
|
|
}
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
rcVrfMib OBJECT IDENTIFIER ::= { rcVrf 1 }
|
|
rcVrfNotifications OBJECT IDENTIFIER ::= { rcVrfMib 0 }
|
|
rcVrfObjects OBJECT IDENTIFIER ::= { rcVrfMib 1 }
|
|
rcVrfNotificationObjects OBJECT IDENTIFIER ::= { rcVrfMib 2 }
|
|
|
|
rcVrfConfig OBJECT IDENTIFIER ::= { rcVrfObjects 1 }
|
|
|
|
rcVrfConfigScalars OBJECT IDENTIFIER ::= { rcVrfConfig 1 }
|
|
|
|
rcVrfConfigNextAvailableVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next available Virtual Router Id (index).
|
|
This object provides a hint for the rcVrfId value
|
|
to use when administratively creating a new
|
|
rcVrfConfigEntry.
|
|
|
|
A GET of this object returns the next available rcVrfId
|
|
value to be used to create an entry in the associated
|
|
rcVrfConfigTable; or zero, if no valid rcVrfId
|
|
value is available. A value of zero(0) indicates that
|
|
it is not possible to create a new rcVrfConfigEntry.
|
|
This object also returns a value of zero when it is the
|
|
lexicographic successor of a varbind presented in an
|
|
SNMP GETNEXT or GETBULK request, for which circumstance
|
|
it is assumed that ifIndex allocation is unintended.
|
|
|
|
Successive GETs will typically return different
|
|
values, thus avoiding collisions among cooperating
|
|
management clients seeking to create table entries
|
|
simultaneously.
|
|
|
|
Unless specified otherwise by its MAX-ACCESS and
|
|
DESCRIPTION clauses, an object of this type is read-only,
|
|
and a SET of such an object returns a notWritable error."
|
|
::= { rcVrfConfigScalars 1 }
|
|
|
|
rcVrfConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrfConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is for creating the new Virtual Routers."
|
|
::= { rcVrfConfig 2 }
|
|
|
|
rcVrfConfigEntry OBJECT-TYPE
|
|
SYNTAX RcVrfConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entries in this table can be added/deleted
|
|
using the rcVrfRowStatus."
|
|
INDEX { rcVrfId }
|
|
::= { rcVrfConfigTable 1 }
|
|
|
|
RcVrfConfigEntry ::=
|
|
SEQUENCE {
|
|
rcVrfId
|
|
VrfIdentifier,
|
|
rcVrfRowStatus
|
|
RowStatus,
|
|
rcVrfName
|
|
DisplayString,
|
|
rcVrfContextName
|
|
SnmpAdminString,
|
|
rcVrfTrapEnable
|
|
TruthValue,
|
|
rcVrfMaxRoutes
|
|
Unsigned32,
|
|
rcVrfAdminStatus
|
|
INTEGER,
|
|
rcVrfVpnId
|
|
VPNId,
|
|
rcVrfRpTrigger
|
|
VrfRpTriggerBitCode,
|
|
rcVrfMaxRoutesTrapEnable
|
|
TruthValue
|
|
}
|
|
|
|
rcVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique id of this virtual router instance. A Virtual
|
|
Router cannot not be created with rcVrfId = 0.
|
|
VRFID 0 is reserved for the Administrative VRF.
|
|
"
|
|
::= { rcVrfConfigEntry 1 }
|
|
|
|
rcVrfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status column has three defined values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device;
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device;
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row."
|
|
::= { rcVrfConfigEntry 2 }
|
|
|
|
rcVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Name of the Virtual Router."
|
|
::= { rcVrfConfigEntry 3 }
|
|
|
|
rcVrfContextName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv2 Community String or SNMPv3 contextName
|
|
denotes the VRF 'context' and is used to logically
|
|
separate the MIB module management."
|
|
::= { rcVrfConfigEntry 4 }
|
|
|
|
rcVrfTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects is used to enable the generation
|
|
of the VrfUp and VrfDown traps.
|
|
true(1) - VRF Traps Enabled
|
|
false(2) - VRF Traps Disabled"
|
|
DEFVAL { true }
|
|
::= { rcVrfConfigEntry 5 }
|
|
|
|
rcVrfMaxRoutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the maximum number of routes that
|
|
this VRF can support. The default value is 10000."
|
|
DEFVAL { 10000 }
|
|
::= { rcVrfConfigEntry 6 }
|
|
|
|
rcVrfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
testing(3),
|
|
unknown(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the Virtual Router."
|
|
DEFVAL { down }
|
|
::= { rcVrfConfigEntry 7 }
|
|
|
|
rcVrfVpnId OBJECT-TYPE
|
|
SYNTAX VPNId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Virtual Private Network Identifier of the Virtual
|
|
Router."
|
|
::= { rcVrfConfigEntry 8 }
|
|
|
|
rcVrfRpTrigger OBJECT-TYPE
|
|
SYNTAX VrfRpTriggerBitCode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Routing Protocol (RP)
|
|
Triggers on a Virtual Router and it meant to
|
|
be used to initiate or shutdown routing
|
|
protocols on a VRF. Multiple RPs can be acted
|
|
on simultaneously. Also, individual RPs can
|
|
be brought up in steps, which should not
|
|
affect the RPs that were running. The BITS
|
|
represent an Action-code that specifies what
|
|
action is to be performed for the RPs.
|
|
The actions are: initiate(1) or shutdown(0).
|
|
|
|
The running status of an RP shall be available
|
|
in the VRF stats table's rcVrfRpStatus, which has
|
|
a similar format, but represents the status.
|
|
|
|
Bits 0-3 may be specified in any combination.
|
|
Individual routing protocols may be enabled
|
|
and disabled independently. Protocols are
|
|
enabled by setting the respective BIT and are
|
|
disabled by resetting the BIT.
|
|
|
|
So, for example, to enable RIP and BGP protocols
|
|
the rcVrfRpTrigger bits 0 and 2 need to be set, and
|
|
as encoded as 10100000.
|
|
All zeros should be interpreted as all protocols
|
|
disable.
|
|
"
|
|
DEFVAL {{ rip, ospf }}
|
|
::= { rcVrfConfigEntry 9 }
|
|
|
|
rcVrfMaxRoutesTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects is used to enable the generation
|
|
of the VRF Max Routes Exceeded traps.
|
|
true(1) - VRF Max Routes Exceeded Traps Enabled
|
|
false(2) - VRF Max Routes Exceeded Traps Disabled"
|
|
DEFVAL { true }
|
|
::= { rcVrfConfigEntry 10 }
|
|
|
|
rcVrfStat OBJECT IDENTIFIER ::= { rcVrfObjects 2 }
|
|
|
|
rcVrfStatScalars OBJECT IDENTIFIER ::= { rcVrfStat 1 }
|
|
|
|
rcVrfConfiguredVRFs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRFs configured on this network element."
|
|
::= { rcVrfStatScalars 1 }
|
|
|
|
rcVrfActiveVRFs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRFs that are active on the network element.
|
|
These are VRFs for which the
|
|
rcVrfStatOperStatus = up(1)"
|
|
::= { rcVrfStatScalars 2 }
|
|
|
|
rcVrfStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrfStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains statistics for the Virtual Router."
|
|
::= { rcVrfStat 2 }
|
|
|
|
rcVrfStatEntry OBJECT-TYPE
|
|
SYNTAX RcVrfStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries in this table are per rcVrfId."
|
|
INDEX { rcVrfId }
|
|
::= { rcVrfStatTable 1 }
|
|
|
|
RcVrfStatEntry ::=
|
|
SEQUENCE {
|
|
rcVrfStatRouteEntries
|
|
Unsigned32,
|
|
rcVrfStatFIBEntries
|
|
Unsigned32,
|
|
rcVrfStatUpTime
|
|
TimeTicks,
|
|
rcVrfOperStatus
|
|
INTEGER,
|
|
rcVrfRpStatus
|
|
VrfRpTriggerBitCode,
|
|
rcVrfRouterAddressType
|
|
InetAddressType,
|
|
rcVrfRouterAddress
|
|
InetAddress
|
|
}
|
|
|
|
rcVrfStatRouteEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of routes for this VRF."
|
|
::= { rcVrfStatEntry 1 }
|
|
|
|
rcVrfStatFIBEntries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of FIB Entries for this VRF."
|
|
::= { rcVrfStatEntry 2 }
|
|
|
|
rcVrfStatUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time in (in hundredths of a second) since
|
|
this VRF entry has been operational."
|
|
::= { rcVrfStatEntry 3 }
|
|
|
|
rcVrfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of the Virtual Router."
|
|
::= { rcVrfStatEntry 4 }
|
|
|
|
rcVrfRpStatus OBJECT-TYPE
|
|
SYNTAX VrfRpTriggerBitCode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the status of Routing
|
|
Protocols on this VRF corresponding to the list
|
|
of RP specified in rcVrfRpTrigger.
|
|
|
|
The BITS represent an Action-code that specifies
|
|
the status of the RPs.
|
|
The status are: initiated (1) or shutdown (0).
|
|
Initiated status is indicated when the respective
|
|
BIT value is 1 and indicates shutdown when the
|
|
respective BIT value is 0.
|
|
|
|
Bits 0-3 may appear in any combination to
|
|
indicate that RPs may be enabled and disabled
|
|
independently or that multiple RP are acted on
|
|
simultaneously.
|
|
"
|
|
::= { rcVrfStatEntry 5 }
|
|
|
|
rcVrfRouterAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Router Address Type of this VRF."
|
|
::= { rcVrfStatEntry 6 }
|
|
|
|
rcVrfRouterAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Router Address of this VRF. It is derived from one of the
|
|
interfaces. If loopback interface is present, the loopback
|
|
interface address can be used. However, loopback interface
|
|
is optional."
|
|
::= { rcVrfStatEntry 7 }
|
|
|
|
-- rcIpfix
|
|
|
|
rcIpfixMib OBJECT IDENTIFIER ::= { rcIpfix 1 }
|
|
|
|
rcIpfixConfGlobal OBJECT IDENTIFIER ::= { rcIpfixMib 1 }
|
|
rcIpfixTable OBJECT IDENTIFIER ::= { rcIpfixMib 2 }
|
|
|
|
-- ------------------------------------------
|
|
-- rcIpfixConfGlobal Group
|
|
-- ------------------------------------------
|
|
|
|
rcIpfixConfState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enables/Disables the state of ipfix on the box."
|
|
DEFVAL { disable }
|
|
::= { rcIpfixConfGlobal 1 }
|
|
|
|
rcIpfixRunningState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show Enable/Disable running state of ipfix on the box."
|
|
DEFVAL { disable }
|
|
::= { rcIpfixConfGlobal 2 }
|
|
|
|
-- ------------------------------------------
|
|
-- IPFIX Table (per slot)
|
|
-- ------------------------------------------
|
|
|
|
rcIpfixConfSlotTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpfixConfSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table to store the configuration details for IPFIX for each
|
|
slot. This table is indexed by slot number."
|
|
::= { rcIpfixTable 1 }
|
|
|
|
rcIpfixConfSlotEntry OBJECT-TYPE
|
|
SYNTAX RcIpfixConfSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One Entry holding IPFIX config information on slot basis."
|
|
INDEX { rcIpfixConfSlotNum }
|
|
::= { rcIpfixConfSlotTable 1 }
|
|
|
|
RcIpfixConfSlotEntry ::= SEQUENCE {
|
|
rcIpfixConfSlotNum Integer32,
|
|
rcIpfixConfSlotAgingIntv Integer32,
|
|
rcIpfixConfSlotActiveTimeout Integer32,
|
|
rcIpfixConfSlotExportIntv Integer32,
|
|
rcIpfixConfSlotExportState EnableValue,
|
|
rcIpfixConfSlotTempRefIntvSec Integer32,
|
|
rcIpfixConfSlotTempRefIntvPkts Integer32
|
|
}
|
|
|
|
rcIpfixConfSlotNum OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot number"
|
|
::= { rcIpfixConfSlotEntry 1 }
|
|
|
|
rcIpfixConfSlotAgingIntv OBJECT-TYPE
|
|
SYNTAX Integer32 (10..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flow record aging interval (Value in seconds)."
|
|
DEFVAL { 15 }
|
|
::= { rcIpfixConfSlotEntry 2 }
|
|
|
|
rcIpfixConfSlotActiveTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (1..60)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flow record active timeout value (Value in mins)."
|
|
DEFVAL { 30 }
|
|
::= { rcIpfixConfSlotEntry 3 }
|
|
|
|
rcIpfixConfSlotExportIntv OBJECT-TYPE
|
|
SYNTAX Integer32 (10..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Frequency of flow export to collector (Value in sec)."
|
|
DEFVAL { 50 }
|
|
::= { rcIpfixConfSlotEntry 4 }
|
|
|
|
rcIpfixConfSlotExportState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "State of exporter."
|
|
DEFVAL { enable }
|
|
::= { rcIpfixConfSlotEntry 5 }
|
|
|
|
rcIpfixConfSlotTempRefIntvSec OBJECT-TYPE
|
|
SYNTAX Integer32 (60..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Template refresh timeout. Template is sent out to the
|
|
collector at least every x seconds or every y exported
|
|
packets, whichever occurs first."
|
|
DEFVAL { 60 }
|
|
::= { rcIpfixConfSlotEntry 6 }
|
|
|
|
rcIpfixConfSlotTempRefIntvPkts OBJECT-TYPE
|
|
SYNTAX Integer32 (1..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Template refresh timeout. Template is sent out to the
|
|
collector at least every x seconds or every y exported
|
|
packets, whichever occurs first."
|
|
DEFVAL { 20 }
|
|
::= { rcIpfixConfSlotEntry 7 }
|
|
|
|
-- ------------------------------------------
|
|
-- IPFIX Collector Table (per slot)
|
|
-- ------------------------------------------
|
|
|
|
rcIpfixCollectorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpfixCollectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table to store the configuration details for IPFIX collector
|
|
for each slot. This table is indexed by slot number and ip
|
|
address."
|
|
::= { rcIpfixTable 2 }
|
|
|
|
rcIpfixCollectorEntry OBJECT-TYPE
|
|
SYNTAX RcIpfixCollectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "One entry holds IPFIX collector config information based on
|
|
slot info and collector ip address."
|
|
INDEX { rcIpfixCollectorSlotNum,
|
|
rcIpfixCollectorAddressType,
|
|
rcIpfixCollectorAddress }
|
|
::= { rcIpfixCollectorTable 1 }
|
|
|
|
RcIpfixCollectorEntry ::= SEQUENCE {
|
|
rcIpfixCollectorSlotNum Integer32,
|
|
rcIpfixCollectorAddressType InetAddressType,
|
|
rcIpfixCollectorAddress InetAddress,
|
|
rcIpfixCollectorProtocol INTEGER,
|
|
rcIpfixCollectorDestPort InetPortNumber,
|
|
rcIpfixCollectorExporterIpType InetAddressType,
|
|
rcIpfixCollectorExporterIp InetAddress,
|
|
rcIpfixCollectorProtoVer INTEGER,
|
|
rcIpfixCollectorState TruthValue,
|
|
rcIpfixCollectorRowStatus RowStatus
|
|
}
|
|
|
|
rcIpfixCollectorSlotNum OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot number. An index to the CollectorEntry."
|
|
::= { rcIpfixCollectorEntry 1 }
|
|
|
|
rcIpfixCollectorAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address type of the collector. An index to the
|
|
CollectorEntry."
|
|
::= { rcIpfixCollectorEntry 2 }
|
|
|
|
rcIpfixCollectorAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address of the collector. An index to the CollectorEntry."
|
|
::= { rcIpfixCollectorEntry 3 }
|
|
|
|
rcIpfixCollectorProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
udp(1),
|
|
tcp(2),
|
|
sctp(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Protocol for export data from exporter to collector ."
|
|
DEFVAL { 1 }
|
|
::= { rcIpfixCollectorEntry 4 }
|
|
|
|
rcIpfixCollectorDestPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Dest port to send the requests."
|
|
DEFVAL { 9995 }
|
|
::= { rcIpfixCollectorEntry 5 }
|
|
|
|
rcIpfixCollectorExporterIpType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ip address type of the exporter for collector."
|
|
::= { rcIpfixCollectorEntry 6 }
|
|
|
|
rcIpfixCollectorExporterIp OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ip address of the exporter for collector."
|
|
::= { rcIpfixCollectorEntry 7 }
|
|
|
|
rcIpfixCollectorProtoVer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipfix(1),
|
|
preipfixv9(2),
|
|
preipfixv5(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This specifies the protocol version for ipfix."
|
|
DEFVAL { 2 }
|
|
::= { rcIpfixCollectorEntry 8 }
|
|
|
|
rcIpfixCollectorState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "State of the particular collector. Enable is true by
|
|
default."
|
|
DEFVAL { true }
|
|
::= { rcIpfixCollectorEntry 9 }
|
|
|
|
rcIpfixCollectorRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcIpfixCollectorEntry 10 }
|
|
|
|
-- ------------------------------------------
|
|
-- IPFIX Table (per port)
|
|
-- ------------------------------------------
|
|
|
|
rcIpfixConfPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpfixConfPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table to store the configuration details for IPFIX for each
|
|
port. This table is indexed by port number."
|
|
::= { rcIpfixTable 3 }
|
|
|
|
rcIpfixConfPortEntry OBJECT-TYPE
|
|
SYNTAX RcIpfixConfPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry holding IPFIX config information per port."
|
|
INDEX { rcIpfixConfPortId }
|
|
::= { rcIpfixConfPortTable 1 }
|
|
|
|
RcIpfixConfPortEntry ::= SEQUENCE {
|
|
rcIpfixConfPortId InterfaceIndex,
|
|
rcIpfixConfPortSampleRate Integer32,
|
|
rcIpfixConfPortHashPolyCoeffs Integer32,
|
|
rcIpfixConfPortHashPolySeed Integer32,
|
|
rcIpfixConfPortFlush INTEGER,
|
|
rcIpfixConfPortAllTraffic EnableValue,
|
|
rcIpfixConfPortHashKeyId INTEGER,
|
|
rcIpfixConfPortDynamicSampRate Integer32
|
|
}
|
|
|
|
rcIpfixConfPortId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index to the IpfixConfPortEntry, a unique identifier of
|
|
the portId"
|
|
::= { rcIpfixConfPortEntry 1 }
|
|
|
|
rcIpfixConfPortSampleRate OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to configure the sampling rate. Sample one in every N
|
|
packets."
|
|
DEFVAL { 1 }
|
|
::= { rcIpfixConfPortEntry 2 }
|
|
|
|
rcIpfixConfPortHashPolyCoeffs OBJECT-TYPE
|
|
SYNTAX Integer32 ('000401'h..'FFFFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Command to set hash polynomial coeffs."
|
|
DEFVAL { '0007CC'h }
|
|
::= { rcIpfixConfPortEntry 3 }
|
|
|
|
rcIpfixConfPortHashPolySeed OBJECT-TYPE
|
|
SYNTAX Integer32 ('000000'h..'FFFFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Command to set hash polynomial seed."
|
|
DEFVAL { 0 }
|
|
::= { rcIpfixConfPortEntry 4 }
|
|
|
|
rcIpfixConfPortFlush OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
flush(2),
|
|
exportAndFlush(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is used to delete all records stored in COP, or to
|
|
initiate an export of all records and delete data base after
|
|
the export is finished."
|
|
DEFVAL { none }
|
|
::= { rcIpfixConfPortEntry 5 }
|
|
|
|
rcIpfixConfPortAllTraffic OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is used to enable/disable ipfix on all trafiic, for the
|
|
specified port."
|
|
DEFVAL { disable }
|
|
::= { rcIpfixConfPortEntry 6 }
|
|
|
|
rcIpfixConfPortHashKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hashKeyOne(1),
|
|
hashKeyTwo(2),
|
|
hashKeyThree(3),
|
|
hashKeyFour(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "hash key id."
|
|
DEFVAL { 1 }
|
|
::= { rcIpfixConfPortEntry 7 }
|
|
|
|
rcIpfixConfPortDynamicSampRate OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the dynamic sampling rate."
|
|
::= { rcIpfixConfPortEntry 8 }
|
|
|
|
-- ------------------------------------------
|
|
-- Hash Stats Table( per slot)
|
|
-- ------------------------------------------
|
|
|
|
rcIpfixHashStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpfixHashStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of hash Statistics entries to store the statistics
|
|
for each slot. This table is indexed by the slot number."
|
|
::= { rcIpfixTable 4 }
|
|
|
|
rcIpfixHashStatsEntry OBJECT-TYPE
|
|
SYNTAX RcIpfixHashStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing hash statistics information for a particular
|
|
slot."
|
|
INDEX { rcIpfixHashStatsSlotNum }
|
|
::= { rcIpfixHashStatsTable 1 }
|
|
|
|
RcIpfixHashStatsEntry ::= SEQUENCE {
|
|
rcIpfixHashStatsSlotNum Integer32,
|
|
rcIpfixHashStatsHashOverflows Counter64,
|
|
rcIpfixHashStatsHashDrops Counter64,
|
|
rcIpfixHashStatsClear INTEGER,
|
|
rcIpfixHashStatsClearTime TimeStamp
|
|
}
|
|
|
|
rcIpfixHashStatsSlotNum OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique identifier for the table."
|
|
::= { rcIpfixHashStatsEntry 1 }
|
|
|
|
rcIpfixHashStatsHashOverflows OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Count of hash overflows per slot."
|
|
::= { rcIpfixHashStatsEntry 2 }
|
|
|
|
rcIpfixHashStatsHashDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Count of hash drops per slot."
|
|
::= { rcIpfixHashStatsEntry 3 }
|
|
|
|
rcIpfixHashStatsClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object will clear hash statistics for a slot."
|
|
::= { rcIpfixHashStatsEntry 4 }
|
|
|
|
rcIpfixHashStatsClearTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of sysUpTime when the hash statistics were last
|
|
cleared."
|
|
::= { rcIpfixHashStatsEntry 5 }
|
|
|
|
-- ------------------------------------------
|
|
-- Exporter Stats Table( per slot, per collector)
|
|
-- ------------------------------------------
|
|
|
|
rcIpfixExporterStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpfixExporterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of Exporter Statistics entries to store the statistics
|
|
for each slot, each collector. This table is indexed by the
|
|
slot number and collector address."
|
|
::= { rcIpfixTable 5 }
|
|
|
|
rcIpfixExporterStatsEntry OBJECT-TYPE
|
|
SYNTAX RcIpfixExporterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing Exporter statistics information for a
|
|
particular slot and particular collector."
|
|
INDEX { rcIpfixExporterStatsSlotNum,
|
|
rcIpfixExporterStatsCollectorType,
|
|
rcIpfixExporterStatsCollector }
|
|
::= { rcIpfixExporterStatsTable 1 }
|
|
|
|
RcIpfixExporterStatsEntry ::= SEQUENCE {
|
|
rcIpfixExporterStatsSlotNum Integer32,
|
|
rcIpfixExporterStatsCollectorType InetAddressType,
|
|
rcIpfixExporterStatsCollector InetAddress,
|
|
rcIpfixExporterStatsOutPkts Counter64,
|
|
rcIpfixExporterStatsOutOctets Counter64,
|
|
rcIpfixExporterStatsPktsLoss Counter64,
|
|
rcIpfixExporterStatsClear INTEGER,
|
|
rcIpfixExporterStatsClearTime TimeStamp
|
|
}
|
|
|
|
rcIpfixExporterStatsSlotNum OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for the table, slot number."
|
|
::= { rcIpfixExporterStatsEntry 1 }
|
|
|
|
rcIpfixExporterStatsCollectorType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Collector IP address type. This is an index for the table."
|
|
::= { rcIpfixExporterStatsEntry 2 }
|
|
|
|
rcIpfixExporterStatsCollector OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for the table, collector address."
|
|
::= { rcIpfixExporterStatsEntry 3 }
|
|
|
|
rcIpfixExporterStatsOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Packets sent."
|
|
::= { rcIpfixExporterStatsEntry 4 }
|
|
|
|
rcIpfixExporterStatsOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Bytes sent."
|
|
::= { rcIpfixExporterStatsEntry 5 }
|
|
|
|
rcIpfixExporterStatsPktsLoss OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Records lost."
|
|
::= { rcIpfixExporterStatsEntry 6 }
|
|
|
|
rcIpfixExporterStatsClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object will clear exporter statistics."
|
|
::= { rcIpfixExporterStatsEntry 7 }
|
|
|
|
rcIpfixExporterStatsClearTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of sysUpTime when exporter statistics were last
|
|
cleared."
|
|
::= { rcIpfixExporterStatsEntry 8 }
|
|
|
|
--
|
|
-- IPVPN Mib
|
|
--
|
|
|
|
rcIpVpn OBJECT IDENTIFIER ::= { rcIp 27 }
|
|
|
|
rcIpVpnRouteDistinguisherTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of Route Distinguisher Table"
|
|
::= { rcIpVpn 1 }
|
|
|
|
rcIpVpnRouteDistinguisherTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpVpnRouteDistinguisherEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Route Distinguisher Table is a table of entries."
|
|
::= { rcIpVpn 2 }
|
|
|
|
rcIpVpnRouteDistinguisherEntry OBJECT-TYPE
|
|
SYNTAX RcIpVpnRouteDistinguisherEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table contains route distinguisher entry for ipvpn. A route distinguisher entry can be of two types: Type 0 and Type 1. Each type is comprised as follows: Type 0 is made of the 2-byte Autonomous System Number (globally unique) as administrator field followed by a 4-byte locally assigned number field.Type 1 is made of a 4 byte IP address globally unique followed by a 2-byte locally assigned number."
|
|
INDEX { rcIpVpnVrfId }
|
|
::= { rcIpVpnRouteDistinguisherTable 1 }
|
|
|
|
RcIpVpnRouteDistinguisherEntry ::= SEQUENCE {
|
|
rcIpVpnVrfId VrfIdentifier,
|
|
rcIpVpnRouteDistinguisherType INTEGER,
|
|
rcIpVpnRouteDistinguisherAddress IpAddress,
|
|
rcIpVpnRouteDistinguisherAsNumber INTEGER,
|
|
rcIpVpnRouteDistinguisherAssignedNum Unsigned32,
|
|
rcIpVpnRouteDistinguisherRowStatus RowStatus
|
|
}
|
|
|
|
rcIpVpnVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The VrfId is the unique identifier of the
|
|
rcIpVpnRouteDistinguisherTable. It is unique because
|
|
there is only one Route-Distinguisher per Vrf i.e. there
|
|
is a one-to-one mapping between the route-distinguisher
|
|
and the Vrf."
|
|
::= { rcIpVpnRouteDistinguisherEntry 1 }
|
|
|
|
rcIpVpnRouteDistinguisherType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
asnum(1),
|
|
ipaddr(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The route distinguisher can be of the type Ipaddress or
|
|
AS number (Autonomous System) number."
|
|
DEFVAL {asnum}
|
|
::= { rcIpVpnRouteDistinguisherEntry 2 }
|
|
|
|
rcIpVpnRouteDistinguisherAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The IpAddress is required along with the Assigned number
|
|
to create a route-distinguisher entry."
|
|
::= { rcIpVpnRouteDistinguisherEntry 3 }
|
|
|
|
rcIpVpnRouteDistinguisherAsNumber OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The AS (Autonomous System) number is required along with
|
|
the Assigned number to create a route-distinguisher entry."
|
|
::= { rcIpVpnRouteDistinguisherEntry 4 }
|
|
|
|
rcIpVpnRouteDistinguisherAssignedNum OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The assigned number is used in combination with the
|
|
IpAddress or the AS number to create an entry for the
|
|
route-distinguisher."
|
|
::= { rcIpVpnRouteDistinguisherEntry 5 }
|
|
|
|
rcIpVpnRouteDistinguisherRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row Status for the Route Distinguisher Table."
|
|
::= { rcIpVpnRouteDistinguisherEntry 6 }
|
|
|
|
rcIpVpnRouteTargetTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of Route Target Table"
|
|
::= { rcIpVpn 3 }
|
|
|
|
rcIpVpnRouteTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpVpnRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table specifies per-VRF route target association."
|
|
::= { rcIpVpn 4 }
|
|
|
|
rcIpVpnRouteTargetEntry OBJECT-TYPE
|
|
SYNTAX RcIpVpnRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in this table is created for each route target
|
|
configured for a VRF supporting a MPLS/BGP VPN instance."
|
|
INDEX { rcIpVpnRouteTargetIndex }
|
|
::= { rcIpVpnRouteTargetTable 1 }
|
|
|
|
RcIpVpnRouteTargetEntry ::=
|
|
SEQUENCE {
|
|
rcIpVpnRouteTargetIndex INTEGER,
|
|
rcIpVpnRouteTargetType INTEGER,
|
|
rcIpVpnRouteTargetIpAddress IpAddress,
|
|
rcIpVpnRouteTargetAsNumber INTEGER,
|
|
rcIpVpnRouteTargetAssignedNum Unsigned32,
|
|
rcIpVpnRouteTargetRowStatus RowStatus
|
|
}
|
|
|
|
rcIpVpnRouteTargetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Route Target Index is a unique value for the
|
|
rcIpVpnRouteTargetTable. It is an incremental integer value."
|
|
::= { rcIpVpnRouteTargetEntry 1 }
|
|
|
|
rcIpVpnRouteTargetType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
asnum(1),
|
|
ipaddr(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The route target entry is identified on the basis of ipaddress for Autonomous System number."
|
|
DEFVAL {asnum}
|
|
::= { rcIpVpnRouteTargetEntry 2 }
|
|
|
|
rcIpVpnRouteTargetIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The IpAddress is required along with the Assigned number
|
|
to create a route-target entry."
|
|
::= { rcIpVpnRouteTargetEntry 3 }
|
|
|
|
rcIpVpnRouteTargetAsNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The AS (Autonomous System) number is required along with
|
|
the Assigned number to create a route-target entry."
|
|
::= { rcIpVpnRouteTargetEntry 4 }
|
|
|
|
rcIpVpnRouteTargetAssignedNum OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The assigned number is used in combination with the IpAddress
|
|
or the AS number to create an entry for the route-target
|
|
table."
|
|
::= { rcIpVpnRouteTargetEntry 5 }
|
|
|
|
rcIpVpnRouteTargetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Table Row Status."
|
|
::= { rcIpVpnRouteTargetEntry 6 }
|
|
|
|
rcVrfIpVpnTableSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Size of Vrf IpVpn Table"
|
|
::= { rcVrfObjects 3 }
|
|
|
|
rcVrfIpVpnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrfIpVpnTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table required to configure vpn under ip."
|
|
::= { rcVrfObjects 4 }
|
|
|
|
rcVrfIpVpnTableEntry OBJECT-TYPE
|
|
SYNTAX RcVrfIpVpnTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entries in this table are per rcVrfId."
|
|
INDEX { rcVrfIpVpnVrfId }
|
|
::= { rcVrfIpVpnTable 1 }
|
|
|
|
RcVrfIpVpnTableEntry ::=
|
|
SEQUENCE {
|
|
rcVrfIpVpnVrfId VrfIdentifier,
|
|
rcVrfIpVpnStatus EnableValue,
|
|
rcVrfIpVpnImportRTList IdList,
|
|
rcVrfIpVpnExportRTList IdList,
|
|
rcVrfIpVpnSvcLblAllocOpt INTEGER,
|
|
rcVrfIpVpnRowStatus RowStatus,
|
|
rcVrfIpVpnIsidNumber Integer32
|
|
}
|
|
|
|
rcVrfIpVpnVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The VrfId serves as the Index for the rcIpVpnVrfTable and
|
|
also for the rcIpVpnRouteDistinguisherTable. It allows to
|
|
connect to the vrf table to obtain other attributes like the
|
|
vrf name, rcVrfMaxRoutesTrapEnable etc."
|
|
::= { rcVrfIpVpnTableEntry 1 }
|
|
|
|
rcVrfIpVpnStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of IpVpn."
|
|
DEFVAL { disable }
|
|
::= { rcVrfIpVpnTableEntry 2 }
|
|
|
|
rcVrfIpVpnImportRTList OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Import RT list is a list of all the route-targets
|
|
attached to a particular vrf behaving in the import mode."
|
|
::= { rcVrfIpVpnTableEntry 3 }
|
|
|
|
rcVrfIpVpnExportRTList OBJECT-TYPE
|
|
SYNTAX IdList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Export RT list is a list of all the route-targets
|
|
attached to a particular vrf in the export mode."
|
|
::= { rcVrfIpVpnTableEntry 4 }
|
|
|
|
rcVrfIpVpnSvcLblAllocOpt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perVrfperNexthop(1),
|
|
perVrf(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The service label allocation option for the ipvpn"
|
|
::= { rcVrfIpVpnTableEntry 5 }
|
|
|
|
rcVrfIpVpnRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "RowStatus for the Vpn Entry."
|
|
::= { rcVrfIpVpnTableEntry 6 }
|
|
|
|
rcVrfIpVpnIsidNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP VPN I-SID number.Default 0 value indicates
|
|
that no i-sid has been assinged."
|
|
DEFVAL { 0 }
|
|
::= { rcVrfIpVpnTableEntry 7 }
|
|
|
|
rcVrfNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrfNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is for EDM and SNMP agent to get source vrf name
|
|
for inter-vrf route redistribute."
|
|
::= { rcVrfObjects 5 }
|
|
|
|
rcVrfNameEntry OBJECT-TYPE
|
|
SYNTAX RcVrfNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry has the vrfid and name for source vrf needed by
|
|
inter-vrf route redistribute."
|
|
INDEX { rcVrfNameVrfId }
|
|
::= { rcVrfNameTable 1 }
|
|
|
|
RcVrfNameEntry ::=
|
|
SEQUENCE {
|
|
rcVrfNameVrfId
|
|
VrfIdentifier,
|
|
rcVrfNameVrfName
|
|
DisplayString
|
|
}
|
|
|
|
rcVrfNameVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique id of this virtual router instance."
|
|
::= { rcVrfNameEntry 1 }
|
|
|
|
rcVrfNameVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Name of the Virtual Router."
|
|
::= { rcVrfNameEntry 2 }
|
|
|
|
rcIpMvpnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMvpnTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table required to configure mvpn"
|
|
::= { rcIp 31 }
|
|
|
|
rcIpMvpnTableEntry OBJECT-TYPE
|
|
SYNTAX RcIpMvpnTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entries in this table are per rcVrfId."
|
|
INDEX { rcIpMvpnVrfId }
|
|
::= { rcIpMvpnTable 1 }
|
|
|
|
RcIpMvpnTableEntry ::=
|
|
SEQUENCE {
|
|
rcIpMvpnVrfId VrfIdentifier,
|
|
rcIpMvpnEnable EnableValue,
|
|
rcIpMvpnFwdCacheTimeout Integer32
|
|
}
|
|
|
|
rcIpMvpnVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The VrfId serves as the Index for rcVrfIpMvpnTableEntry"
|
|
::= { rcIpMvpnTableEntry 1 }
|
|
|
|
rcIpMvpnEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The status of mvpn on a vrf."
|
|
DEFVAL { disable }
|
|
::= { rcIpMvpnTableEntry 2 }
|
|
|
|
rcIpMvpnFwdCacheTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (10..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Mvpn Fwd Cache Timeout in seconds"
|
|
DEFVAL { 210 }
|
|
::= { rcIpMvpnTableEntry 3 }
|
|
|
|
|
|
|
|
rcSlppMib OBJECT IDENTIFIER ::= { rcSlpp 1 }
|
|
|
|
rcSlppNotifications OBJECT IDENTIFIER ::= { rcSlppMib 0 }
|
|
rcSlppObjects OBJECT IDENTIFIER ::= { rcSlppMib 1 }
|
|
rcSlppNotificationObjects OBJECT IDENTIFIER ::= { rcSlppMib 2 }
|
|
|
|
rcSlppScalars OBJECT IDENTIFIER ::= { rcSlppObjects 1 }
|
|
|
|
rcSlppGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Global enable/disable for the simple loop prevention protocol."
|
|
DEFVAL { false }
|
|
::= { rcSlppScalars 1 }
|
|
|
|
rcSlppTransmissionInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (500..5000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interval (in seconds) for which loop detection occurs."
|
|
DEFVAL { 500 }
|
|
::= { rcSlppScalars 2 }
|
|
|
|
rcSlppEtherType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SLPP Protocol Identification. The value is normally in Hex."
|
|
DEFVAL { '8104'h }
|
|
::= { rcSlppScalars 3 }
|
|
|
|
rcSlppTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This value specifies the time period for which a port
|
|
will remain disabled. When SLPP disables a port, after
|
|
this time period expires, the port will become
|
|
re-enabled. A value of 0 means ports will never
|
|
be re-enabled."
|
|
DEFVAL { 0 }
|
|
::= { rcSlppScalars 4 }
|
|
|
|
rcSlppUniPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Contains UNI ports added under SLPP global config"
|
|
::= { rcSlppScalars 5 }
|
|
|
|
rcSlppGuardEtherType OBJECT-TYPE
|
|
SYNTAX Integer32(1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SLPP Guard ether type."
|
|
DEFVAL { '8102'h }
|
|
::= { rcSlppScalars 6 }
|
|
|
|
rcSlppSopCongestionDetectionEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Global enable/disable for SLPP SOP congestion detection."
|
|
DEFVAL { false }
|
|
::= { rcSlppScalars 7 }
|
|
|
|
rcSlppPortdownWaitInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..50000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The portdown wait interval(in milli seconds) during sop congestion."
|
|
DEFVAL { 0 }
|
|
::= { rcSlppScalars 8 }
|
|
|
|
|
|
rcSlppVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSlppVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of VLANs for which simple loop detection occur on."
|
|
::= { rcSlppObjects 2 }
|
|
|
|
rcSlppVlanEntry OBJECT-TYPE
|
|
SYNTAX RcSlppVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SLPP VLAN entry. "
|
|
INDEX { rcSlppVlanVlanId }
|
|
::= { rcSlppVlanTable 1 }
|
|
|
|
RcSlppVlanEntry ::= SEQUENCE {
|
|
rcSlppVlanVlanId RcVlanIdOrNone,
|
|
rcSlppVlanSlppEnable TruthValue,
|
|
rcSlppVlanRowStatus RowStatus
|
|
}
|
|
|
|
rcSlppVlanVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan id for which simple loop detection occurs on."
|
|
::= { rcSlppVlanEntry 1 }
|
|
|
|
rcSlppVlanSlppEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to indicate whether the VLAN entry is active or not for SLPP."
|
|
::= { rcSlppVlanEntry 2 }
|
|
|
|
rcSlppVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcSlppVlanEntry 3 }
|
|
|
|
rcSlppPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcSlppPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of ports for which simple loop detection occurs on."
|
|
::= { rcSlppObjects 3 }
|
|
|
|
rcSlppPortEntry OBJECT-TYPE
|
|
SYNTAX RcSlppPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SLPP Port entry. "
|
|
INDEX { rcSlppPortIfIndex }
|
|
::= { rcSlppPortTable 1 }
|
|
|
|
RcSlppPortEntry ::= SEQUENCE {
|
|
rcSlppPortIfIndex InterfaceIndex,
|
|
rcSlppPortPktRxThreshold Integer32,
|
|
rcSlppPortSlppEnable TruthValue,
|
|
rcSlppPortRowStatus RowStatus,
|
|
rcSlppPortIncomingVlanId RcVlanIdOrNone,
|
|
rcSlppPortSrcNodeType INTEGER,
|
|
rcSlppPortPktRxCount Integer32,
|
|
rcSlppPortGuardEnable TruthValue,
|
|
rcSlppPortGuardTimeout Integer32,
|
|
rcSlppPortGuardStatus INTEGER,
|
|
rcSlppPortGuardTimerCount Integer32,
|
|
rcSlppPortTimeToClrPktRxCount Unsigned32,
|
|
rcSlppPortRemainingTimeToClrPktRxCount Unsigned32,
|
|
rcSlppPortClearPktRxCount TruthValue
|
|
}
|
|
|
|
rcSlppPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port on which simple loop detection occurs on."
|
|
::= { rcSlppPortEntry 1 }
|
|
|
|
rcSlppPortPktRxThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (1..500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Once the number of SLPP packets received on this port reaches this threshold action will be taken.Normally, the port will be shutdown."
|
|
DEFVAL { 1 }
|
|
::= { rcSlppPortEntry 2 }
|
|
|
|
rcSlppPortSlppEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flag to indicate whether the port entry is active or not for SLPP."
|
|
DEFVAL { false }
|
|
::= { rcSlppPortEntry 3 }
|
|
|
|
rcSlppPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries."
|
|
::= { rcSlppPortEntry 4 }
|
|
|
|
rcSlppPortIncomingVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan id of the classified packet on the port brought down by SLPP."
|
|
::= { rcSlppPortEntry 5 }
|
|
|
|
rcSlppPortSrcNodeType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
local(1),
|
|
peer(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The src node type of the received slpp Pkt."
|
|
::= { rcSlppPortEntry 6 }
|
|
|
|
rcSlppPortPktRxCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..500)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SLPP packets received on the port."
|
|
::= { rcSlppPortEntry 7}
|
|
|
|
rcSlppPortGuardEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to indicate if SLPP-guard is enabled on the port."
|
|
::= { rcSlppPortEntry 8 }
|
|
|
|
rcSlppPortGuardTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0|10..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value specifies the time period for which a port will remain
|
|
disabled. When SLPP-guard disables a port, after this time period
|
|
expires, the port will become re-enabled. A value of 0 means ports
|
|
will never be re-enabled."
|
|
::= { rcSlppPortEntry 9 }
|
|
|
|
rcSlppPortGuardStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
monitoring(2),
|
|
blocking(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the SLPP-guard status of a port."
|
|
::= { rcSlppPortEntry 10 }
|
|
|
|
rcSlppPortGuardTimerCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value specifies the time period that has passed since
|
|
a port was operationally disabled by SLPP-guard. When this
|
|
object reaches the timeout value (rcSlppPortGuardTimeout),
|
|
the port will become re-enabled."
|
|
::= { rcSlppPortEntry 11 }
|
|
|
|
rcSlppPortTimeToClrPktRxCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..21600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time to clear the SLPP Rx PDU counter. This has a default
|
|
value of 21600 seconds. Once SLPP is enabled and port
|
|
starts receiving SLPP PDUs, a timer is started and once
|
|
the timer exceeds this configured value, rcSlppPortPktRxCount
|
|
is reset to zero."
|
|
::= {rcSlppPortEntry 12}
|
|
|
|
rcSlppPortRemainingTimeToClrPktRxCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..21600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Remaining time to clear the SLPP Rx PDU counter. It is
|
|
calculated using rcSlppPortTimeToClrPktRxCount and has
|
|
a granularity of 5 seconds."
|
|
::= { rcSlppPortEntry 13}
|
|
|
|
rcSlppPortClearPktRxCount OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear the SLPP Rx PDU counter."
|
|
::= { rcSlppPortEntry 14}
|
|
|
|
|
|
rcSlppIncomingVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Vlan id of the classified packet on the port brought down by SLPP."
|
|
::= { rcSlppNotificationObjects 1 }
|
|
|
|
rcSlppSrcMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Source MAC address in the classified packet on the port
|
|
brought down by SLPP."
|
|
::= { rcSlppNotificationObjects 2 }
|
|
|
|
rcSlppRxPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Port on which the SLPP packet is received."
|
|
::= { rcSlppNotificationObjects 3 }
|
|
|
|
rcSlppRxVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Vlan on which the SLPP packet is received."
|
|
::= { rcSlppNotificationObjects 4 }
|
|
|
|
rcSlppTxVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Vlan on which the SLPP packet is sent."
|
|
::= { rcSlppNotificationObjects 5 }
|
|
|
|
rcSlppGuardPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Port on which the SLPP-guard packet is received."
|
|
::= { rcSlppNotificationObjects 6 }
|
|
|
|
rcnSlppPortDownEvent NOTIFICATION-TYPE
|
|
OBJECTS { rcSlppPortSlppEnable, rcSlppVlanSlppEnable,
|
|
rcSlppIncomingVlanId, rcSlppSrcMacAddress }
|
|
STATUS obsolete
|
|
DESCRIPTION "A port down event that has occurred due to SLPP. The user is notified of the expected Vlan ID along with the Vlan ID and source MAC
|
|
address of the packet coming in on the port identified. The first two
|
|
objects can be used to lookup instance info for port id and vlan id."
|
|
::= { rcSlppNotifications 1 }
|
|
|
|
rcnSlppPortDownEventNew NOTIFICATION-TYPE
|
|
OBJECTS { rcSlppRxPortIndex, rcSlppRxVlanId, rcSlppIncomingVlanId,
|
|
rcSlppSrcMacAddress }
|
|
STATUS current
|
|
DESCRIPTION "A port down event that has occurred due to SLPP. The trap
|
|
includes the port and its Vlan which receives the packet, and
|
|
along with the Vlan ID and source MAC address of the packet coming in
|
|
on the port identified."
|
|
::= { rcSlppNotifications 2 }
|
|
|
|
rcnSlppLoopOnDiffVlan NOTIFICATION-TYPE
|
|
OBJECTS { rcSlppRxPortIndex,
|
|
rcSlppRxVlanId,
|
|
rcSlppTxVlanId,
|
|
rcSlppSrcMacAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates SLPP received its own packet but with the TX VLAN not
|
|
equal to the RX VLAN."
|
|
::= { rcSlppNotifications 3 }
|
|
|
|
rcnSlppGuardHoldDownExpired NOTIFICATION-TYPE
|
|
OBJECTS { rcSlppGuardPortIfIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the SLPP-guard hold-down timer has expired on a port
|
|
on which SLPP-guard is enabled, and the port has been re-enabled."
|
|
::= { rcSlppNotifications 4 }
|
|
|
|
rcnSlppGuardPacketReceived NOTIFICATION-TYPE
|
|
OBJECTS { rcSlppGuardPortIfIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates an SLPP packet has been received on a port on which
|
|
SLPP-guard is enabled. The port has been disabled."
|
|
::= { rcSlppNotifications 5 }
|
|
|
|
-- MPLS
|
|
|
|
rcMplsMib OBJECT IDENTIFIER ::= { rcMpls 1 }
|
|
rcMplsNotifications OBJECT IDENTIFIER ::= { rcMplsMib 0 }
|
|
rcMplsObjects OBJECT IDENTIFIER ::= { rcMplsMib 1 }
|
|
rcMplsNotificationObjects OBJECT IDENTIFIER ::= { rcMplsMib 2 }
|
|
|
|
-- Object groups within the MPLS MIB
|
|
--
|
|
rcMplsGlobalGroup OBJECT IDENTIFIER ::= { rcMplsObjects 1 }
|
|
|
|
rcMplsGlobalScalars OBJECT IDENTIFIER ::= { rcMplsGlobalGroup 1 }
|
|
|
|
-- MPLS Global Variables
|
|
|
|
rcMplsRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP address of the circuitless interface to be used as router-id"
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { rcMplsGlobalScalars 1 }
|
|
|
|
-- MPLS LDP Global
|
|
|
|
rcMplsLdpAdminStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "State of global LDP - enabled or disabled"
|
|
DEFVAL { disable }
|
|
::= { rcMplsGlobalScalars 2 }
|
|
|
|
rcMplsLdpPenultimateHopPop OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
implicit-null(1),
|
|
explicit-null(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "State of global LDP Penultimate Hop Popping."
|
|
DEFVAL { implicit-null }
|
|
::= { rcMplsGlobalScalars 3 }
|
|
|
|
rcMplsLdpHelloHoldTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (5..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global Hello Hold Time in seconds."
|
|
DEFVAL { 15 }
|
|
::= { rcMplsGlobalScalars 4 }
|
|
|
|
rcMplsLdpSessionKeepAlive OBJECT-TYPE
|
|
SYNTAX Unsigned32 (15..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global Session Keep alive in seconds."
|
|
DEFVAL { 40 }
|
|
::= { rcMplsGlobalScalars 5 }
|
|
|
|
rcMplsLdpPathVectorLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global path vector limit."
|
|
DEFVAL { 0 }
|
|
::= { rcMplsGlobalScalars 6 }
|
|
|
|
rcMplsLdpHopCountLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global loop detect hop count limit."
|
|
DEFVAL { 0 }
|
|
::= { rcMplsGlobalScalars 7 }
|
|
|
|
rcMplsLdpEgressPolicyStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "State of LDP Egress-policy enabled or disabled"
|
|
DEFVAL { disable }
|
|
::= {rcMplsGlobalScalars 8 }
|
|
|
|
-- MPLS RSVP Global
|
|
|
|
rcMplsRsvpAdminStatus OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "State of global RSVP - enabled or disabled"
|
|
DEFVAL { disable }
|
|
::= { rcMplsGlobalScalars 9 }
|
|
|
|
rcMplsRsvpPenultimateHopPop OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
implicit-null(1),
|
|
explicit-null(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "State of global RSVP Penultimate Hop Popping."
|
|
DEFVAL { implicit-null }
|
|
::= { rcMplsGlobalScalars 10 }
|
|
|
|
rcMplsRsvpHelloInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global RSVP hello interval."
|
|
DEFVAL { 10 }
|
|
::= { rcMplsGlobalScalars 11 }
|
|
|
|
rcMplsRsvpRefreshReduction OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "State of global RSVP refresh reduction - enabled or disabled"
|
|
DEFVAL { enable }
|
|
::= { rcMplsGlobalScalars 12 }
|
|
|
|
rcMplsRsvpRefreshInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global value for RSVP refresh interval."
|
|
DEFVAL { 30 }
|
|
::= { rcMplsGlobalScalars 13 }
|
|
|
|
rcMplsRsvpRefreshMultiplier OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global value for RSVP refresh multiplier."
|
|
DEFVAL { 3 }
|
|
::= { rcMplsGlobalScalars 14 }
|
|
rcMplsRsvpMessageBundling OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "State of global RSVP message bundling - enabled or disabled"
|
|
DEFVAL { enable }
|
|
::= { rcMplsGlobalScalars 15}
|
|
|
|
-- MPLS STATISTICS
|
|
rcMplsLspIngressStartLabel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1048576)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global ingress rsp start label."
|
|
DEFVAL { 0 }
|
|
::= { rcMplsGlobalScalars 16 }
|
|
|
|
rcMplsLspEgressStartLabel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1048576)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global egress rsp start label."
|
|
DEFVAL { 0 }
|
|
::= { rcMplsGlobalScalars 17 }
|
|
|
|
rcMplsLspIngressPktEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable ingress rsp pkt lsp stats"
|
|
DEFVAL { false }
|
|
::= { rcMplsGlobalScalars 18}
|
|
|
|
rcMplsLspEgressPktEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable egress rsp pkt lsp stats"
|
|
DEFVAL { false }
|
|
::= { rcMplsGlobalScalars 19}
|
|
|
|
rcMplsLdpClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear global LDP Statistics."
|
|
DEFVAL { false }
|
|
::= { rcMplsGlobalScalars 20}
|
|
|
|
rcMplsRsvpClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear global RSVP Statistics."
|
|
DEFVAL { false }
|
|
::= { rcMplsGlobalScalars 21}
|
|
|
|
rcMplsLspClearStats OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
transmit(1),
|
|
receive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear 'transmit' or 'receive' lsp statistics."
|
|
::= { rcMplsGlobalScalars 22 }
|
|
|
|
|
|
-- IP-Static FEC Mapping Table
|
|
|
|
rcMplsIpStaticFecTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsIpStaticFecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of ip-static fec mappings for both
|
|
RSVP and LDP ."
|
|
::= { rcMplsGlobalGroup 2 }
|
|
|
|
rcMplsIpStaticFecEntry OBJECT-TYPE
|
|
SYNTAX RcMplsIpStaticFecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A static fec mapping to an rsvp lsp or ldp egress IP address."
|
|
INDEX { rcMplsIpStaticFecDest,
|
|
rcMplsIpStaticFecMask }
|
|
::= { rcMplsIpStaticFecTable 1 }
|
|
|
|
RcMplsIpStaticFecEntry ::=
|
|
SEQUENCE {
|
|
rcMplsIpStaticFecDest IpAddress,
|
|
rcMplsIpStaticFecMask IpAddress,
|
|
rcMplsIpStaticFecTunnelName DisplayString,
|
|
rcMplsIpStaticFecTunnelId MplsTunnelIndex,
|
|
rcMplsIpStaticFecEgressAddr IpAddress,
|
|
rcMplsIpStaticFecEgressMask IpAddress,
|
|
rcMplsIpStaticFecState INTEGER,
|
|
rcMplsIpStaticFecRowStatus RowStatus
|
|
}
|
|
|
|
rcMplsIpStaticFecDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The statically-configured destination IP address."
|
|
::= { rcMplsIpStaticFecEntry 1 }
|
|
|
|
rcMplsIpStaticFecMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The statically-configured destination IP mask."
|
|
::= { rcMplsIpStaticFecEntry 2 }
|
|
|
|
rcMplsIpStaticFecTunnelName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..33))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The rsvp lsp tunnel name associated with
|
|
rcMplsIpStaticFecTunnelId. This field will be
|
|
null if the value of rcMplsIpStaticFecTunnelId is 0."
|
|
::= { rcMplsIpStaticFecEntry 3 }
|
|
|
|
rcMplsIpStaticFecTunnelId OBJECT-TYPE
|
|
SYNTAX MplsTunnelIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The rsvp lsp tunnel index (from mplsTunnelTable
|
|
defined in rfc3812) if this is an rsvp Ip statically
|
|
mapped address. This field will be 0 if this is an
|
|
LDP Egress Address mapping."
|
|
::= { rcMplsIpStaticFecEntry 4 }
|
|
|
|
rcMplsIpStaticFecEgressAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The LDP Egress IP Address.
|
|
This field will be 0 if this is an rsvp
|
|
tunnel fec mapping."
|
|
::= { rcMplsIpStaticFecEntry 5 }
|
|
|
|
rcMplsIpStaticFecEgressMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The LDP Egress IP Mask.
|
|
This field will be 0 if this is an rsvp
|
|
tunnel fec mapping."
|
|
::= { rcMplsIpStaticFecEntry 6 }
|
|
|
|
rcMplsIpStaticFecState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the actual operational status of this
|
|
static fec."
|
|
::= { rcMplsIpStaticFecEntry 7 }
|
|
|
|
rcMplsIpStaticFecRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { rcMplsIpStaticFecEntry 8 }
|
|
|
|
-- Mpls FTN Table
|
|
|
|
rcMplsIpFtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsIpFtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls Ip FTN."
|
|
::= { rcMplsGlobalGroup 3 }
|
|
|
|
rcMplsIpFtnEntry OBJECT-TYPE
|
|
SYNTAX RcMplsIpFtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An mpls FTN entry ."
|
|
INDEX { rcMplsIpFtnDest,
|
|
rcMplsIpFtnMask }
|
|
::= { rcMplsIpFtnTable 1 }
|
|
|
|
RcMplsIpFtnEntry ::=
|
|
SEQUENCE {
|
|
rcMplsIpFtnDest IpAddress,
|
|
rcMplsIpFtnMask IpAddress,
|
|
rcMplsIpFtnType INTEGER,
|
|
rcMplsIpFtnOutLabel MplsLabel,
|
|
rcMplsIpFtnOutIfIndex InterfaceIndex,
|
|
rcMplsIpFtnNextHop IpAddress
|
|
}
|
|
|
|
rcMplsIpFtnDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The FTN destination IP address."
|
|
::= { rcMplsIpFtnEntry 1 }
|
|
|
|
rcMplsIpFtnMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The FTN destination IP mask."
|
|
::= { rcMplsIpFtnEntry 2 }
|
|
|
|
rcMplsIpFtnType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rsvp-static(1),
|
|
ldp-static(2),
|
|
ldp-dynamic(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The FTN next hop label type."
|
|
::= { rcMplsIpFtnEntry 3 }
|
|
|
|
rcMplsIpFtnOutLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The FTN outgoing label."
|
|
::= { rcMplsIpFtnEntry 4 }
|
|
|
|
rcMplsIpFtnOutIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
same value of ifIndex."
|
|
::= { rcMplsIpFtnEntry 5 }
|
|
|
|
rcMplsIpFtnNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The FTN next hop Ip Address."
|
|
::= { rcMplsIpFtnEntry 6 }
|
|
|
|
|
|
-- Mpls Ilm Table (Incoming Label Map)
|
|
|
|
rcMplsIpIlmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsIpIlmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls Incoming Label Mapping."
|
|
::= { rcMplsGlobalGroup 4 }
|
|
|
|
rcMplsIpIlmEntry OBJECT-TYPE
|
|
SYNTAX RcMplsIpIlmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An mpls Incoming Label Map entry ."
|
|
INDEX { rcMplsIpIlmInLabel }
|
|
::= { rcMplsIpIlmTable 1 }
|
|
|
|
RcMplsIpIlmEntry ::=
|
|
SEQUENCE {
|
|
rcMplsIpIlmInLabel MplsLabel,
|
|
rcMplsIpIlmInIfIndex InterfaceIndex,
|
|
rcMplsIpIlmOutLabel MplsLabel,
|
|
rcMplsIpIlmOutIfIndex InterfaceIndex,
|
|
rcMplsIpIlmNextHop IpAddress
|
|
}
|
|
|
|
rcMplsIpIlmInLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Incoming Label."
|
|
::= { rcMplsIpIlmEntry 1 }
|
|
|
|
rcMplsIpIlmInIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
incoming interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
same value of ifIndex."
|
|
::= { rcMplsIpIlmEntry 2 }
|
|
|
|
rcMplsIpIlmOutLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Outgoing Label."
|
|
::= { rcMplsIpIlmEntry 3 }
|
|
|
|
rcMplsIpIlmOutIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The index value which uniquely identifies the
|
|
outgoing interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
same value of ifIndex."
|
|
::= { rcMplsIpIlmEntry 4 }
|
|
|
|
rcMplsIpIlmNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The next hop Ip Address."
|
|
::= { rcMplsIpIlmEntry 5 }
|
|
|
|
|
|
-- Mpls Ingress Lsp Statistics Table
|
|
|
|
rcMplsIngressLspStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsIngressLspStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls Incoming Label Stats."
|
|
::= { rcMplsGlobalGroup 5 }
|
|
|
|
rcMplsIngressLspStatEntry OBJECT-TYPE
|
|
SYNTAX RcMplsIngressLspStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An mpls Incoming Label Stat entry ."
|
|
INDEX { rcMplsIngressLspPort,
|
|
rcMplsIngressLspLabel}
|
|
::= { rcMplsIngressLspStatTable 1 }
|
|
|
|
RcMplsIngressLspStatEntry ::=
|
|
SEQUENCE {
|
|
rcMplsIngressLspPort INTEGER,
|
|
rcMplsIngressLspLabel MplsLabel,
|
|
rcMplsIngressLspPkts Counter64
|
|
}
|
|
|
|
rcMplsIngressLspPort OBJECT-TYPE
|
|
SYNTAX INTEGER (64..687)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The incoming port for the lsp."
|
|
::= { rcMplsIngressLspStatEntry 1 }
|
|
|
|
|
|
rcMplsIngressLspLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Incoming Lsp Label."
|
|
::= { rcMplsIngressLspStatEntry 2 }
|
|
|
|
rcMplsIngressLspPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Count of incoming packets for the corresponding lsp and port."
|
|
::= { rcMplsIngressLspStatEntry 3 }
|
|
|
|
-- Mpls Egress Lsp Statistics Table
|
|
|
|
rcMplsEgressLspStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsEgressLspStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls OutGoing Label Stats."
|
|
::= { rcMplsGlobalGroup 6 }
|
|
|
|
rcMplsEgressLspStatEntry OBJECT-TYPE
|
|
SYNTAX RcMplsEgressLspStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An mpls OutGoing Label Stat entry ."
|
|
INDEX { rcMplsEgressLspPort,
|
|
rcMplsEgressLspLabel}
|
|
::= { rcMplsEgressLspStatTable 1 }
|
|
|
|
RcMplsEgressLspStatEntry ::=
|
|
SEQUENCE {
|
|
rcMplsEgressLspPort INTEGER,
|
|
rcMplsEgressLspLabel MplsLabel,
|
|
rcMplsEgressLspPkts Counter64
|
|
}
|
|
|
|
rcMplsEgressLspPort OBJECT-TYPE
|
|
SYNTAX INTEGER (64..687)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The OutGoing port for the lsp."
|
|
::= { rcMplsEgressLspStatEntry 1 }
|
|
|
|
|
|
rcMplsEgressLspLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The OutGoing Lsp Label."
|
|
::= { rcMplsEgressLspStatEntry 2 }
|
|
|
|
|
|
rcMplsEgressLspPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Count of outgoing packets for the corresponding lsp and port."
|
|
::= { rcMplsEgressLspStatEntry 3 }
|
|
|
|
|
|
-- Mpls Rsvp Information
|
|
|
|
rcMplsRsvpGroup OBJECT IDENTIFIER ::= { rcMplsObjects 2 }
|
|
|
|
-- For 'show mpls rsvp summary' command
|
|
rcMplsRsvpSummaryGroup OBJECT IDENTIFIER ::= { rcMplsRsvpGroup 1 }
|
|
|
|
rcMplsRsvpSummaryVersion OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the RSVP version number."
|
|
::= { rcMplsRsvpSummaryGroup 1 }
|
|
|
|
rcMplsRsvpSummaryState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the RSVP protocol state."
|
|
::= { rcMplsRsvpSummaryGroup 2 }
|
|
|
|
rcMplsRsvpSummaryLSPRetryTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the retry timer (secs) for the LSPs
|
|
starting from this node, in case of failure.
|
|
A value of zero means no retry on LSPs."
|
|
::= { rcMplsRsvpSummaryGroup 3 }
|
|
|
|
rcMplsRsvpSummaryLSPRetryLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the retry limit for the LSPs starting
|
|
from this node. It indicates how many times
|
|
an LSP is retried before giving up.
|
|
A value of zero means try infinitely."
|
|
::= { rcMplsRsvpSummaryGroup 4 }
|
|
|
|
rcMplsRsvpSummaryLSPDecayRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the decay rate (percent) for LSPs
|
|
starting on this node."
|
|
::= { rcMplsRsvpSummaryGroup 5 }
|
|
|
|
rcMplsRsvpSummaryPHP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
implicit-null(1),
|
|
explicit-null(2),
|
|
disabled(3)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the configured RSVP PHP support on
|
|
this node. Possible values are implicit-null,
|
|
explicit-null, or disabled."
|
|
::= { rcMplsRsvpSummaryGroup 6 }
|
|
|
|
|
|
-- Mpls Tunnel Extension Table
|
|
|
|
-- Rapid city extensions to mplsTunnelTable (rfc3812)
|
|
rcMplsRsvpTunnelExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsRsvpTunnelExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls rsvp tunnels. This table
|
|
supplements the mplsTunnelTable from rfc3812."
|
|
::= { rcMplsRsvpGroup 2 }
|
|
|
|
rcMplsRsvpTunnelExtEntry OBJECT-TYPE
|
|
SYNTAX RcMplsRsvpTunnelExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls tunnel table."
|
|
INDEX { rcMplsRsvpTunnelExtIndex,
|
|
rcMplsRsvpTunnelExtInstance,
|
|
rcMplsRsvpTunnelExtIngressLSRId,
|
|
rcMplsRsvpTunnelExtEgressLSRId }
|
|
::= { rcMplsRsvpTunnelExtTable 1 }
|
|
|
|
RcMplsRsvpTunnelExtEntry ::=
|
|
SEQUENCE {
|
|
rcMplsRsvpTunnelExtIndex MplsTunnelIndex,
|
|
rcMplsRsvpTunnelExtInstance MplsTunnelInstanceIndex,
|
|
rcMplsRsvpTunnelExtIngressLSRId MplsExtendedTunnelId,
|
|
rcMplsRsvpTunnelExtEgressLSRId MplsExtendedTunnelId,
|
|
rcMplsRsvpTunnelExtName SnmpAdminString,
|
|
rcMplsRsvpTunnelExtSwitchover TruthValue,
|
|
rcMplsRsvpTunnelExtActiveStatus TruthValue,
|
|
rcMplsRsvpTunnelExtResStyle SnmpAdminString,
|
|
rcMplsRsvpTunnelExtLspId MplsLSPID,
|
|
rcMplsRsvpTunnelExtERO SnmpAdminString,
|
|
rcMplsRsvpTunnelExtRRO SnmpAdminString,
|
|
rcMplsRsvpTunnelExtInIfIndex InterfaceIndex,
|
|
rcMplsRsvpTunnelExtInLabel MplsLabel,
|
|
rcMplsRsvpTunnelExtInNeighbor IpAddress,
|
|
rcMplsRsvpTunnelExtOutIfIndex InterfaceIndex,
|
|
rcMplsRsvpTunnelExtOutLabel MplsLabel,
|
|
rcMplsRsvpTunnelExtOutNeighbor IpAddress,
|
|
rcMplsRsvpTunnelExtTSpecRate Unsigned32,
|
|
rcMplsRsvpTunnelExtTSpecSize Unsigned32,
|
|
rcMplsRsvpTunnelExtTSpecPeak Unsigned32,
|
|
rcMplsRsvpTunnelExtTSpecMin Unsigned32,
|
|
rcMplsRsvpTunnelExtTSpecMax Unsigned32,
|
|
rcMplsRsvpTunnelExtInstanceUpTime TimeTicks,
|
|
rcMplsRsvpTunnelExtLSPUpTime TimeTicks
|
|
}
|
|
|
|
rcMplsRsvpTunnelExtIndex OBJECT-TYPE
|
|
SYNTAX MplsTunnelIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Tunnel Index. The value of this object
|
|
should mimic the value of mplsTunnelIndex of the
|
|
MplsTunnelEntry of the mpls tunnel for which
|
|
this extended tunnel table entry row applies."
|
|
::= { rcMplsRsvpTunnelExtEntry 1 }
|
|
|
|
rcMplsRsvpTunnelExtInstance OBJECT-TYPE
|
|
SYNTAX MplsTunnelInstanceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Tunnel Instance. The value of this object
|
|
should mimic the value of mplsTunnelInstance of the
|
|
MplsTunnelEntry of the mpls tunnel for which
|
|
this extended tunnel table entry row applies."
|
|
::= { rcMplsRsvpTunnelExtEntry 2 }
|
|
|
|
rcMplsRsvpTunnelExtIngressLSRId OBJECT-TYPE
|
|
SYNTAX MplsExtendedTunnelId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Rsvp Tunnel Ingress LSR Id. The value of
|
|
this object should mimic the value of the
|
|
mplsTunnelIngressLSRId of the
|
|
MplsTunnelEntry of the mpls tunnel for which
|
|
this extended tunnel table entry row applies."
|
|
::= { rcMplsRsvpTunnelExtEntry 3 }
|
|
|
|
rcMplsRsvpTunnelExtEgressLSRId OBJECT-TYPE
|
|
SYNTAX MplsExtendedTunnelId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Rsvp Tunnel Egress LSR Id. The value of
|
|
this object should mimic the value of the
|
|
mplsTunnelEgressLSRId of the
|
|
MplsTunnelEntry of the mpls tunnel for which
|
|
this extended tunnel table entry row applies."
|
|
::= { rcMplsRsvpTunnelExtEntry 4 }
|
|
|
|
rcMplsRsvpTunnelExtName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Name of the tunnel associated with this LSP."
|
|
::= { rcMplsRsvpTunnelExtEntry 5 }
|
|
|
|
rcMplsRsvpTunnelExtSwitchover OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Switch this LSP from active status to inactive
|
|
status or vice versa."
|
|
DEFVAL { false }
|
|
::= { rcMplsRsvpTunnelExtEntry 6 }
|
|
|
|
rcMplsRsvpTunnelExtActiveStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is 'true' if this is the active LSP of the tunnel."
|
|
::= { rcMplsRsvpTunnelExtEntry 7 }
|
|
|
|
rcMplsRsvpTunnelExtResStyle OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the reservation style of the tunnel."
|
|
::= { rcMplsRsvpTunnelExtEntry 8 }
|
|
|
|
rcMplsRsvpTunnelExtLspId OBJECT-TYPE
|
|
SYNTAX MplsLSPID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LSP Id of this LSP."
|
|
::= { rcMplsRsvpTunnelExtEntry 9 }
|
|
|
|
rcMplsRsvpTunnelExtERO OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (100))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the Explicit Route associated with this LSP."
|
|
::= { rcMplsRsvpTunnelExtEntry 10 }
|
|
|
|
rcMplsRsvpTunnelExtRRO OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (100))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the Recorded Route associated with this LSP."
|
|
::= { rcMplsRsvpTunnelExtEntry 11 }
|
|
|
|
rcMplsRsvpTunnelExtInIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the incoming interface for the LSP. This
|
|
applies to rows with mplsTunnelRole set to
|
|
transit(2) or tail(3)."
|
|
::= { rcMplsRsvpTunnelExtEntry 12 }
|
|
|
|
rcMplsRsvpTunnelExtInLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the incoming Mpls Label. This
|
|
applies to rows with mplsTunnelRole set to
|
|
transit(2) or tail(3)."
|
|
::= { rcMplsRsvpTunnelExtEntry 13 }
|
|
|
|
rcMplsRsvpTunnelExtInNeighbor OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This address of the previous-hop (upstream)
|
|
router. This applies to rows with mplsTunnelRole
|
|
set to transit(2) or tail(3)."
|
|
::= { rcMplsRsvpTunnelExtEntry 14 }
|
|
|
|
rcMplsRsvpTunnelExtOutIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the outgoing interface for the LSP. This
|
|
applies to rows with mplsTunnelRole set to
|
|
head(1) or transit(2)."
|
|
::= { rcMplsRsvpTunnelExtEntry 15 }
|
|
|
|
rcMplsRsvpTunnelExtOutLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the outgoing Mpls Label. This
|
|
applies to rows with mplsTunnelRole set to
|
|
head(1) or transit(2)."
|
|
::= { rcMplsRsvpTunnelExtEntry 16 }
|
|
|
|
rcMplsRsvpTunnelExtOutNeighbor OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This address of the next-hop (downstream)
|
|
router. This applies to rows with
|
|
applies to rows with mplsTunnelRole set to
|
|
head(1) or transit(2)."
|
|
::= { rcMplsRsvpTunnelExtEntry 17 }
|
|
|
|
rcMplsRsvpTunnelExtTSpecRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the primary LSP TSpec Rate.
|
|
This applies to rows with mplsTunnelRole set to
|
|
transit(2) or tail(3)."
|
|
::= { rcMplsRsvpTunnelExtEntry 18 }
|
|
|
|
rcMplsRsvpTunnelExtTSpecSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the primary LSP TSpec Size.
|
|
This applies to rows with mplsTunnelRole set to
|
|
transit(2) or tail(3)."
|
|
::= { rcMplsRsvpTunnelExtEntry 19 }
|
|
|
|
rcMplsRsvpTunnelExtTSpecPeak OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the primary LSP TSpec Peak.
|
|
This applies to rows with mplsTunnelRole set to
|
|
transit(2) or tail(3)."
|
|
::= { rcMplsRsvpTunnelExtEntry 20 }
|
|
|
|
rcMplsRsvpTunnelExtTSpecMin OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the primary LSP TSpec Min.
|
|
This applies to rows with mplsTunnelRole set to
|
|
transit(2) or tail(3)."
|
|
::= { rcMplsRsvpTunnelExtEntry 21 }
|
|
|
|
rcMplsRsvpTunnelExtTSpecMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the primary lsp TSpec Max.
|
|
This applies to rows with mplsTunnelRole set to
|
|
transit(2) or tail(3)."
|
|
::= { rcMplsRsvpTunnelExtEntry 22 }
|
|
|
|
rcMplsRsvpTunnelExtInstanceUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the time (in 100ths of a second)
|
|
that this instance has been in the Oper 'Up'
|
|
state. When the instance transitions out of
|
|
the Oper 'Up' state the time is reset to
|
|
zero."
|
|
::= { rcMplsRsvpTunnelExtEntry 23 }
|
|
|
|
rcMplsRsvpTunnelExtLSPUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the time (in 100ths of a second)
|
|
that all instances of this LSP have been in
|
|
the Oper Up state. The time is calculated
|
|
based on the create time of the first instance
|
|
of the LSP to go to the Oper 'Up' state. When
|
|
all instances of this LSP have transitioned
|
|
out of the Oper 'Up' state the time is reset
|
|
to zero."
|
|
::= { rcMplsRsvpTunnelExtEntry 24 }
|
|
|
|
|
|
rcMplsRsvpNeighborTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsRsvpNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls rsvp neighbors."
|
|
::= { rcMplsRsvpGroup 3 }
|
|
|
|
rcMplsRsvpNeighborEntry OBJECT-TYPE
|
|
SYNTAX RcMplsRsvpNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls rsvp tunnel table."
|
|
INDEX { rcMplsRsvpNeighborAddress }
|
|
::= { rcMplsRsvpNeighborTable 1 }
|
|
|
|
RcMplsRsvpNeighborEntry ::=
|
|
SEQUENCE {
|
|
rcMplsRsvpNeighborAddress IpAddress,
|
|
rcMplsRsvpNeighborHelloState SnmpAdminString,
|
|
rcMplsRsvpNeighborIfIndex InterfaceIndex,
|
|
rcMplsRsvpNeighborTime Integer32,
|
|
rcMplsRsvpNeighborPeriod Integer32,
|
|
rcMplsRsvpNeighborSendCnt Integer32,
|
|
rcMplsRsvpNeighborRcvCnt Integer32,
|
|
rcMplsRsvpNeighborLocalInstance Integer32,
|
|
rcMplsRsvpNeighborRemoteInstance Integer32,
|
|
rcMplsRsvpNeighborCreationTime Integer32,
|
|
rcMplsRsvpNeighborLastPktRxTime Integer32,
|
|
rcMplsRsvpNeighborRefReduction SnmpAdminString
|
|
}
|
|
|
|
rcMplsRsvpNeighborAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the address of a learned neighbor."
|
|
::= { rcMplsRsvpNeighborEntry 1 }
|
|
|
|
rcMplsRsvpNeighborHelloState OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the state of hello exchange with
|
|
the neighbor."
|
|
::= { rcMplsRsvpNeighborEntry 2 }
|
|
|
|
rcMplsRsvpNeighborIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the interface index of the neighbor."
|
|
::= { rcMplsRsvpNeighborEntry 3 }
|
|
|
|
rcMplsRsvpNeighborTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the time the neighbor was learned."
|
|
::= { rcMplsRsvpNeighborEntry 4 }
|
|
|
|
rcMplsRsvpNeighborPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the RSVP Hello Interval."
|
|
::= { rcMplsRsvpNeighborEntry 5 }
|
|
|
|
rcMplsRsvpNeighborSendCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the number of Hello packets sent
|
|
to the neighbor."
|
|
::= { rcMplsRsvpNeighborEntry 6 }
|
|
|
|
rcMplsRsvpNeighborRcvCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the number of Hellp packets received
|
|
from the neighbor."
|
|
::= { rcMplsRsvpNeighborEntry 7 }
|
|
|
|
rcMplsRsvpNeighborLocalInstance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the identification sent to the remote
|
|
router during Hello message exchange."
|
|
::= { rcMplsRsvpNeighborEntry 8 }
|
|
|
|
rcMplsRsvpNeighborRemoteInstance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the identification provided by the
|
|
remote router during Hello message exchange."
|
|
::= { rcMplsRsvpNeighborEntry 9 }
|
|
|
|
rcMplsRsvpNeighborCreationTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the time the neighbor instance was created."
|
|
::= { rcMplsRsvpNeighborEntry 10 }
|
|
|
|
rcMplsRsvpNeighborLastPktRxTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the time that the last Hello message
|
|
was received from the remote router."
|
|
::= { rcMplsRsvpNeighborEntry 11 }
|
|
|
|
rcMplsRsvpNeighborRefReduction OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the refresh-reduction status between the
|
|
local router and the neighbor."
|
|
::= { rcMplsRsvpNeighborEntry 12 }
|
|
|
|
|
|
-- For 'show mpls rsvp interface' command
|
|
rcMplsRsvpInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsRsvpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls rsvp interfaces."
|
|
::= { rcMplsRsvpGroup 4 }
|
|
|
|
rcMplsRsvpInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcMplsRsvpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls rsvp interface table."
|
|
INDEX { rcMplsRsvpInterfaceIfIndex }
|
|
::= { rcMplsRsvpInterfaceTable 1 }
|
|
|
|
RcMplsRsvpInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcMplsRsvpInterfaceIfIndex InterfaceIndex,
|
|
rcMplsRsvpInterfaceAddress IpAddress,
|
|
rcMplsRsvpInterfaceRefreshInterval Unsigned32,
|
|
rcMplsRsvpInterfaceRefreshMult Unsigned32,
|
|
rcMplsRsvpInterfaceHelloInterval Unsigned32,
|
|
rcMplsRsvpInterfaceRefreshReduction Unsigned32,
|
|
rcMplsRsvpInterfaceMessageBundling Unsigned32
|
|
}
|
|
|
|
rcMplsRsvpInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the interface index."
|
|
::= { rcMplsRsvpInterfaceEntry 1 }
|
|
|
|
rcMplsRsvpInterfaceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the address of the interface."
|
|
::= { rcMplsRsvpInterfaceEntry 2 }
|
|
|
|
rcMplsRsvpInterfaceRefreshInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the RSVP refresh interval for the
|
|
interface(seconds)."
|
|
::= { rcMplsRsvpInterfaceEntry 3 }
|
|
|
|
rcMplsRsvpInterfaceRefreshMult OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the configured RSVP refresh
|
|
multiplier for the interface(seconds)."
|
|
::= { rcMplsRsvpInterfaceEntry 4 }
|
|
|
|
rcMplsRsvpInterfaceHelloInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the configured RSVP Hello Interval
|
|
of the interface (seconds)."
|
|
::= { rcMplsRsvpInterfaceEntry 5 }
|
|
|
|
rcMplsRsvpInterfaceRefreshReduction OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the configured RSVP refresh reduction
|
|
support on the interface."
|
|
::= { rcMplsRsvpInterfaceEntry 6 }
|
|
|
|
rcMplsRsvpInterfaceMessageBundling OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This indicates state of message bundling on the interface."
|
|
::= { rcMplsRsvpInterfaceEntry 7 }
|
|
|
|
|
|
-- For 'show mpls rsvp statistics' command
|
|
rcMplsRsvpStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsRsvpStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls rsvp statistics."
|
|
::= { rcMplsRsvpGroup 5 }
|
|
|
|
rcMplsRsvpStatsEntry OBJECT-TYPE
|
|
SYNTAX RcMplsRsvpStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls rsvp statistics table."
|
|
INDEX { rcMplsRsvpStatsIfIndex }
|
|
::= { rcMplsRsvpStatsTable 1 }
|
|
|
|
RcMplsRsvpStatsEntry ::=
|
|
SEQUENCE {
|
|
rcMplsRsvpStatsIfIndex InterfaceIndex,
|
|
rcMplsRsvpStatsPathRcv Counter32,
|
|
rcMplsRsvpStatsPathSent Counter32,
|
|
rcMplsRsvpStatsPathErrRcv Counter32,
|
|
rcMplsRsvpStatsPathErrSent Counter32,
|
|
rcMplsRsvpStatsPathTearRcv Counter32,
|
|
rcMplsRsvpStatsPathTearSent Counter32,
|
|
rcMplsRsvpStatsResvRcv Counter32,
|
|
rcMplsRsvpStatsResvSent Counter32,
|
|
rcMplsRsvpStatsResvErrRcv Counter32,
|
|
rcMplsRsvpStatsResvErrSent Counter32,
|
|
rcMplsRsvpStatsResvTearRcv Counter32,
|
|
rcMplsRsvpStatsResvTearSent Counter32,
|
|
rcMplsRsvpStatsConfTearRcv Counter32,
|
|
rcMplsRsvpStatsConfTearSent Counter32,
|
|
rcMplsRsvpStatsAckRcv Counter32,
|
|
rcMplsRsvpStatsAckSent Counter32,
|
|
rcMplsRsvpStatsSRefreshRcv Counter32,
|
|
rcMplsRsvpStatsSRefreshSent Counter32,
|
|
rcMplsRsvpStatsHelloReqRcv Counter32,
|
|
rcMplsRsvpStatsHelloReqSent Counter32,
|
|
rcMplsRsvpStatsHelloAckRcv Counter32,
|
|
rcMplsRsvpStatsHelloAckSent Counter32,
|
|
rcMplsRsvpStatsBadIpHdr Counter32,
|
|
rcMplsRsvpStatsBadVersion Counter32,
|
|
rcMplsRsvpStatsBadRsvpLen Counter32,
|
|
rcMplsRsvpStatsBadCksum Counter32,
|
|
rcMplsRsvpStatsBadMsgType Counter32,
|
|
rcMplsRsvpStatsBadMsgForm Counter32,
|
|
rcMplsRsvpStatsBadIntf Counter32,
|
|
rcMplsRsvpStatsClear TruthValue
|
|
}
|
|
|
|
rcMplsRsvpStatsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the interface index. This value can be 0 or
|
|
a valid interface index. When 0 the global rsvp
|
|
statistics are retrieved."
|
|
::= { rcMplsRsvpStatsEntry 1 }
|
|
|
|
rcMplsRsvpStatsPathRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the path received count."
|
|
::= { rcMplsRsvpStatsEntry 2 }
|
|
|
|
rcMplsRsvpStatsPathSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the path sent count."
|
|
::= { rcMplsRsvpStatsEntry 3 }
|
|
|
|
rcMplsRsvpStatsPathErrRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the path error receives count."
|
|
::= { rcMplsRsvpStatsEntry 4 }
|
|
|
|
rcMplsRsvpStatsPathErrSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the path error sent count."
|
|
::= { rcMplsRsvpStatsEntry 5 }
|
|
|
|
rcMplsRsvpStatsPathTearRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the path tear receives count."
|
|
::= { rcMplsRsvpStatsEntry 6 }
|
|
|
|
rcMplsRsvpStatsPathTearSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the path tear sent count."
|
|
::= { rcMplsRsvpStatsEntry 7 }
|
|
|
|
rcMplsRsvpStatsResvRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the reservation received count."
|
|
::= { rcMplsRsvpStatsEntry 8 }
|
|
|
|
rcMplsRsvpStatsResvSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the reservation sent count."
|
|
::= { rcMplsRsvpStatsEntry 9 }
|
|
|
|
rcMplsRsvpStatsResvErrRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the reservation error receives count."
|
|
::= { rcMplsRsvpStatsEntry 10 }
|
|
|
|
rcMplsRsvpStatsResvErrSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the reservation error sent count."
|
|
::= { rcMplsRsvpStatsEntry 11 }
|
|
|
|
rcMplsRsvpStatsResvTearRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the resv tear receives count."
|
|
::= { rcMplsRsvpStatsEntry 12 }
|
|
|
|
rcMplsRsvpStatsResvTearSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the resv tear sent count."
|
|
::= { rcMplsRsvpStatsEntry 13 }
|
|
|
|
rcMplsRsvpStatsConfTearRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the conf tear receives count."
|
|
::= { rcMplsRsvpStatsEntry 14 }
|
|
|
|
rcMplsRsvpStatsConfTearSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the conf tear sent count."
|
|
::= { rcMplsRsvpStatsEntry 15 }
|
|
|
|
rcMplsRsvpStatsAckRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the acks receives count."
|
|
::= { rcMplsRsvpStatsEntry 16 }
|
|
|
|
rcMplsRsvpStatsAckSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the acks sent count."
|
|
::= { rcMplsRsvpStatsEntry 17 }
|
|
|
|
rcMplsRsvpStatsSRefreshRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the summary refresh receives count."
|
|
::= { rcMplsRsvpStatsEntry 18 }
|
|
|
|
rcMplsRsvpStatsSRefreshSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the summary refresh sent count."
|
|
::= { rcMplsRsvpStatsEntry 19 }
|
|
|
|
rcMplsRsvpStatsHelloReqRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the hello request receives count."
|
|
::= { rcMplsRsvpStatsEntry 20 }
|
|
|
|
rcMplsRsvpStatsHelloReqSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the hello request sent count."
|
|
::= { rcMplsRsvpStatsEntry 21 }
|
|
|
|
rcMplsRsvpStatsHelloAckRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the hello ack receives count."
|
|
::= { rcMplsRsvpStatsEntry 22 }
|
|
|
|
rcMplsRsvpStatsHelloAckSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the hello ack sent count."
|
|
::= { rcMplsRsvpStatsEntry 23 }
|
|
|
|
rcMplsRsvpStatsBadIpHdr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of pkts with bad IP Header."
|
|
::= { rcMplsRsvpStatsEntry 24}
|
|
|
|
rcMplsRsvpStatsBadVersion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of pkts with Bad Version."
|
|
::= { rcMplsRsvpStatsEntry 25}
|
|
|
|
rcMplsRsvpStatsBadRsvpLen OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of pkts with Bad Rsvp length."
|
|
::= { rcMplsRsvpStatsEntry 26}
|
|
|
|
rcMplsRsvpStatsBadCksum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of pkts with Bad Checksum."
|
|
::= { rcMplsRsvpStatsEntry 27}
|
|
|
|
rcMplsRsvpStatsBadMsgType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of pkts with Bad Message type."
|
|
::= { rcMplsRsvpStatsEntry 28}
|
|
|
|
rcMplsRsvpStatsBadMsgForm OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of pkts with Bad Message Form."
|
|
::= { rcMplsRsvpStatsEntry 29}
|
|
|
|
rcMplsRsvpStatsBadIntf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of pkts received on a
|
|
Bad Interface."
|
|
::= { rcMplsRsvpStatsEntry 30}
|
|
|
|
rcMplsRsvpStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear RSVP Statistics for the interface."
|
|
DEFVAL { false }
|
|
::= { rcMplsRsvpStatsEntry 31 }
|
|
|
|
|
|
-- Mpls Ldp Information
|
|
|
|
rcMplsLdpGroup OBJECT IDENTIFIER ::= { rcMplsObjects 3 }
|
|
|
|
-- For 'show mpls ldp summary' command
|
|
rcMplsLdpSummaryGroup OBJECT IDENTIFIER ::= { rcMplsLdpGroup 1 }
|
|
|
|
rcMplsLdpSummaryIntAdjCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP summary index."
|
|
::= { rcMplsLdpSummaryGroup 1 }
|
|
|
|
rcMplsLdpSummaryExtAdjCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP summary index."
|
|
::= { rcMplsLdpSummaryGroup 2 }
|
|
|
|
rcMplsLdpSummarySessionCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP summary session count."
|
|
::= { rcMplsLdpSummaryGroup 3 }
|
|
|
|
rcMplsLdpSummaryRouteCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP summary route count."
|
|
::= { rcMplsLdpSummaryGroup 4 }
|
|
|
|
rcMplsLdpSummaryLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP summary Local LDP Id."
|
|
::= { rcMplsLdpSummaryGroup 5 }
|
|
|
|
rcMplsLdpSummaryLspCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP summary LSP count."
|
|
::= { rcMplsLdpSummaryGroup 6 }
|
|
|
|
rcMplsLdpSummaryInSegCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP summary in segment count."
|
|
::= { rcMplsLdpSummaryGroup 7 }
|
|
|
|
rcMplsLdpSummaryOutSegCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP summary out segment count."
|
|
::= { rcMplsLdpSummaryGroup 8 }
|
|
|
|
rcMplsLdpSummaryRedistConn OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP policy redist enable flag."
|
|
::= { rcMplsLdpSummaryGroup 9 }
|
|
|
|
-- For 'show mpls ldp discovery' command
|
|
rcMplsLdpDiscoveryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsLdpDiscoveryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls ldp discoveries."
|
|
::= { rcMplsLdpGroup 2 }
|
|
|
|
rcMplsLdpDiscoveryEntry OBJECT-TYPE
|
|
SYNTAX RcMplsLdpDiscoveryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls ldp discovery table."
|
|
INDEX { rcMplsLdpDiscoveryIfIndex,
|
|
rcMplsLdpDiscoveryPeerLdpId }
|
|
::= { rcMplsLdpDiscoveryTable 1 }
|
|
|
|
RcMplsLdpDiscoveryEntry ::=
|
|
SEQUENCE {
|
|
rcMplsLdpDiscoveryIfIndex InterfaceIndex,
|
|
rcMplsLdpDiscoveryPeerLdpId MplsLdpIdentifier,
|
|
rcMplsLdpDiscoveryPeerTransportAddr IpAddress,
|
|
rcMplsLdpDiscoveryNegotiatedHoldTime Unsigned32,
|
|
rcMplsLdpDiscoveryConfSeqNum Unsigned32,
|
|
rcMplsLdpDiscoveryExtendedDiscovery Unsigned32
|
|
}
|
|
|
|
rcMplsLdpDiscoveryIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the interface index."
|
|
::= { rcMplsLdpDiscoveryEntry 1 }
|
|
|
|
rcMplsLdpDiscoveryPeerLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the peer ldp id."
|
|
::= { rcMplsLdpDiscoveryEntry 2 }
|
|
|
|
rcMplsLdpDiscoveryPeerTransportAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the peer transport address to which
|
|
an LDP session has been provisioned."
|
|
::= { rcMplsLdpDiscoveryEntry 3 }
|
|
|
|
rcMplsLdpDiscoveryNegotiatedHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the hold time negotiated between peers."
|
|
::= { rcMplsLdpDiscoveryEntry 4 }
|
|
|
|
rcMplsLdpDiscoveryConfSeqNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the configured sequence number sent
|
|
by the peer."
|
|
::= { rcMplsLdpDiscoveryEntry 5 }
|
|
|
|
rcMplsLdpDiscoveryExtendedDiscovery OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If set to 1, extended discovery is enabled.
|
|
If set to 0, basic discovery is enabled."
|
|
::= { rcMplsLdpDiscoveryEntry 6 }
|
|
|
|
|
|
-- For 'show mpls ldp path' command
|
|
rcMplsLdpPathTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsLdpPathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls LDP Paths between
|
|
a local peer and a remote peer ."
|
|
::= { rcMplsLdpGroup 3 }
|
|
|
|
rcMplsLdpPathEntry OBJECT-TYPE
|
|
SYNTAX RcMplsLdpPathEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls ldp path table."
|
|
INDEX { rcMplsLdpPathType,
|
|
rcMplsLdpPathAddrType,
|
|
rcMplsLdpPathAddrPrefixLength,
|
|
rcMplsLdpPathAddr }
|
|
::= { rcMplsLdpPathTable 1 }
|
|
|
|
RcMplsLdpPathEntry ::=
|
|
SEQUENCE {
|
|
rcMplsLdpPathType INTEGER,
|
|
rcMplsLdpPathAddrType InetAddressType,
|
|
rcMplsLdpPathAddrPrefixLength InetAddressPrefixLength,
|
|
rcMplsLdpPathAddr InetAddress,
|
|
rcMplsLdpPathInLabel MplsLabel
|
|
}
|
|
|
|
rcMplsLdpPathType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
host(1),
|
|
prefix(2),
|
|
vc(3),
|
|
vcgenid(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the path type.
|
|
ATG_NHR_LDP_FEC_TYPE_NONE 0
|
|
ATG_NHR_LDP_FEC_TYPE_HOST 1
|
|
ATG_NHR_LDP_FEC_TYPE_PREFIX 2
|
|
ATG_NHR_LDP_FEC_TYPE_VC 3
|
|
ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4."
|
|
::= { rcMplsLdpPathEntry 1 }
|
|
|
|
rcMplsLdpPathAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the path address type."
|
|
::= { rcMplsLdpPathEntry 2 }
|
|
|
|
rcMplsLdpPathAddrPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the path address prefix length."
|
|
::= { rcMplsLdpPathEntry 3 }
|
|
|
|
rcMplsLdpPathAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the path address."
|
|
::= { rcMplsLdpPathEntry 4 }
|
|
|
|
rcMplsLdpPathInLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the path address prefix length."
|
|
::= { rcMplsLdpPathEntry 5 }
|
|
|
|
-- For 'show mpls ldp path' command
|
|
rcMplsLdpPathRemotePeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsLdpPathRemotePeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of LDP paths to a given
|
|
remote peer."
|
|
::= { rcMplsLdpGroup 4 }
|
|
|
|
rcMplsLdpPathRemotePeerEntry OBJECT-TYPE
|
|
SYNTAX RcMplsLdpPathRemotePeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls ldp path remote
|
|
peer table."
|
|
INDEX { rcMplsLdpPathRemotePeerType,
|
|
rcMplsLdpPathRemotePeerAddrType,
|
|
rcMplsLdpPathRemotePeerAddrPrefixLength,
|
|
rcMplsLdpPathRemotePeerAddr,
|
|
rcMplsLdpPathRemotePeerId }
|
|
::= { rcMplsLdpPathRemotePeerTable 1 }
|
|
|
|
RcMplsLdpPathRemotePeerEntry ::=
|
|
SEQUENCE {
|
|
rcMplsLdpPathRemotePeerType INTEGER,
|
|
rcMplsLdpPathRemotePeerAddrType InetAddressType,
|
|
rcMplsLdpPathRemotePeerAddrPrefixLength InetAddressPrefixLength,
|
|
rcMplsLdpPathRemotePeerAddr InetAddress,
|
|
rcMplsLdpPathRemotePeerId INTEGER,
|
|
rcMplsLdpPathRemotePeerLdpId MplsLdpIdentifier,
|
|
rcMplsLdpPathRemotePeerOutLabel MplsLabel,
|
|
rcMplsLdpPathRemotePeerState INTEGER
|
|
}
|
|
|
|
rcMplsLdpPathRemotePeerType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
host(1),
|
|
prefix(2),
|
|
vc(3),
|
|
vcgenid(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the path type.
|
|
ATG_NHR_LDP_FEC_TYPE_NONE 0
|
|
ATG_NHR_LDP_FEC_TYPE_HOST 1
|
|
ATG_NHR_LDP_FEC_TYPE_PREFIX 2
|
|
ATG_NHR_LDP_FEC_TYPE_VC 3
|
|
ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4."
|
|
::= { rcMplsLdpPathRemotePeerEntry 1 }
|
|
|
|
rcMplsLdpPathRemotePeerAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the type of the path address."
|
|
::= { rcMplsLdpPathRemotePeerEntry 2 }
|
|
|
|
rcMplsLdpPathRemotePeerAddrPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the path address prefix length."
|
|
::= { rcMplsLdpPathRemotePeerEntry 3 }
|
|
|
|
rcMplsLdpPathRemotePeerAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the path address."
|
|
::= { rcMplsLdpPathRemotePeerEntry 4 }
|
|
|
|
rcMplsLdpPathRemotePeerId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the Id of the remote peer of the path."
|
|
::= { rcMplsLdpPathRemotePeerEntry 5 }
|
|
|
|
rcMplsLdpPathRemotePeerLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP Id of the remote peer of the path."
|
|
::= { rcMplsLdpPathRemotePeerEntry 6 }
|
|
|
|
rcMplsLdpPathRemotePeerOutLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the Out Label for this instance
|
|
of the Remote Peer Id."
|
|
::= { rcMplsLdpPathRemotePeerEntry 7 }
|
|
|
|
rcMplsLdpPathRemotePeerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
inactive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the state of the remote peer."
|
|
::= { rcMplsLdpPathRemotePeerEntry 8 }
|
|
|
|
|
|
-- For 'show mpls ldp route' command
|
|
rcMplsLdpRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsLdpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls ldp routes."
|
|
::= { rcMplsLdpGroup 5 }
|
|
|
|
rcMplsLdpRouteEntry OBJECT-TYPE
|
|
SYNTAX RcMplsLdpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls ldp route table."
|
|
INDEX { rcMplsLdpRouteType,
|
|
rcMplsLdpRouteAddrType,
|
|
rcMplsLdpRouteAddrPrefixLength,
|
|
rcMplsLdpRouteAddr }
|
|
::= { rcMplsLdpRouteTable 1 }
|
|
|
|
RcMplsLdpRouteEntry ::=
|
|
SEQUENCE {
|
|
rcMplsLdpRouteType INTEGER,
|
|
rcMplsLdpRouteAddrType InetAddressType,
|
|
rcMplsLdpRouteAddrPrefixLength InetAddressPrefixLength,
|
|
rcMplsLdpRouteAddr InetAddress,
|
|
rcMplsLdpRouteIfIndex InterfaceIndex,
|
|
rcMplsLdpRouteNextHopAddrType InetAddressType,
|
|
rcMplsLdpRouteNextHopAddr InetAddress
|
|
}
|
|
|
|
|
|
rcMplsLdpRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
host(1),
|
|
prefix(2),
|
|
vc(3),
|
|
vcgenid(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the route type.
|
|
ATG_NHR_LDP_FEC_TYPE_NONE 0
|
|
ATG_NHR_LDP_FEC_TYPE_HOST 1
|
|
ATG_NHR_LDP_FEC_TYPE_PREFIX 2
|
|
ATG_NHR_LDP_FEC_TYPE_VC 3
|
|
ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4."
|
|
::= { rcMplsLdpRouteEntry 1 }
|
|
|
|
rcMplsLdpRouteAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the route address prefix length."
|
|
::= { rcMplsLdpRouteEntry 2 }
|
|
|
|
rcMplsLdpRouteAddrPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the route address prefix length."
|
|
::= { rcMplsLdpRouteEntry 3 }
|
|
|
|
rcMplsLdpRouteAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the route address."
|
|
::= { rcMplsLdpRouteEntry 4 }
|
|
|
|
rcMplsLdpRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the interface index of the route entry."
|
|
::= { rcMplsLdpRouteEntry 5 }
|
|
|
|
rcMplsLdpRouteNextHopAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the address type of the next hop."
|
|
::= { rcMplsLdpRouteEntry 6 }
|
|
|
|
rcMplsLdpRouteNextHopAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the address of the next hop."
|
|
::= { rcMplsLdpRouteEntry 7 }
|
|
|
|
|
|
-- For 'show mpls ldp session' command
|
|
rcMplsLdpSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsLdpSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls ldp sessions."
|
|
::= { rcMplsLdpGroup 6 }
|
|
|
|
rcMplsLdpSessionEntry OBJECT-TYPE
|
|
SYNTAX RcMplsLdpSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls ldp session table."
|
|
INDEX { rcMplsLdpSessionEntityLdpId,
|
|
rcMplsLdpSessionEntityIndex,
|
|
rcMplsLdpSessionPeerLdpId }
|
|
::= { rcMplsLdpSessionTable 1 }
|
|
|
|
RcMplsLdpSessionEntry ::=
|
|
SEQUENCE {
|
|
rcMplsLdpSessionEntityLdpId MplsLdpIdentifier,
|
|
rcMplsLdpSessionEntityIndex IndexInteger,
|
|
rcMplsLdpSessionPeerLdpId MplsLdpIdentifier,
|
|
rcMplsLdpSessionStateLastChange Unsigned32,
|
|
rcMplsLdpSessionState INTEGER,
|
|
rcMplsLdpSessionRole INTEGER,
|
|
rcMplsLdpSessionProtocolVersion Unsigned32,
|
|
rcMplsLdpSessionKeepAliveHoldTimeRem Integer32,
|
|
rcMplsLdpSessionKeepAliveTime Unsigned32,
|
|
rcMplsLdpSessionMaxPduLength Unsigned32,
|
|
rcMplsLdpSessionDiscontinuityTime Integer32,
|
|
rcMplsLdpSessionHoldTime Unsigned32,
|
|
rcMplsLdpSessionUpTime Integer32,
|
|
rcMplsLdpSessionMessagesSent Counter32,
|
|
rcMplsLdpSessionMessagesRecv Counter32
|
|
}
|
|
|
|
rcMplsLdpSessionEntityLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the entity LDP ID for the session."
|
|
::= { rcMplsLdpSessionEntry 1 }
|
|
|
|
rcMplsLdpSessionEntityIndex OBJECT-TYPE
|
|
SYNTAX IndexInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the entity LDP ID for the session."
|
|
::= { rcMplsLdpSessionEntry 2 }
|
|
|
|
rcMplsLdpSessionPeerLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the peer LDP ID for the session."
|
|
::= { rcMplsLdpSessionEntry 3 }
|
|
|
|
rcMplsLdpSessionStateLastChange OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time this Session entered its current state
|
|
as denoted by the rcMplsLdpSessionState object."
|
|
::= { rcMplsLdpSessionEntry 4 }
|
|
|
|
rcMplsLdpSessionState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nonexistent(1),
|
|
initialized(2),
|
|
openrec(3),
|
|
opensent(4),
|
|
operational(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current state of the session, all of the
|
|
states 1 to 5 are based on the state machine
|
|
for session negotiation behavior
|
|
1- nonexistent, 2- initialized, 3- openrec, 4- opensent, 5- operational. "
|
|
REFERENCE
|
|
"RFC3036, LDP Specification, Section 2.5.4,
|
|
Initialization State Machine."
|
|
::= { rcMplsLdpSessionEntry 5 }
|
|
|
|
rcMplsLdpSessionRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
active(2),
|
|
passive(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "During session establishment the LSR/LER takes either
|
|
the active role or the passive role based on address
|
|
comparisons. This object indicates whether this LSR/LER
|
|
was behaving in an active role or passive role during
|
|
this session's establishment, 1- unknown, 2- active, 3- passive.
|
|
The value of unknown(1), indicates that the role is not
|
|
able to be determined at the present time."
|
|
REFERENCE
|
|
"RFC3036, LDP Specification, Section 2.5.3.,
|
|
Session Initialization."
|
|
::= { rcMplsLdpSessionEntry 6 }
|
|
|
|
rcMplsLdpSessionProtocolVersion OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the protocol version."
|
|
::= { rcMplsLdpSessionEntry 7 }
|
|
|
|
rcMplsLdpSessionKeepAliveHoldTimeRem OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the session keep alive hold time remaining."
|
|
::= { rcMplsLdpSessionEntry 8 }
|
|
|
|
rcMplsLdpSessionKeepAliveTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the session keep alive time."
|
|
::= { rcMplsLdpSessionEntry 9 }
|
|
|
|
rcMplsLdpSessionMaxPduLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the session's max pdu length."
|
|
::= { rcMplsLdpSessionEntry 10 }
|
|
|
|
rcMplsLdpSessionDiscontinuityTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the session's discontinuity time."
|
|
::= { rcMplsLdpSessionEntry 11 }
|
|
|
|
rcMplsLdpSessionHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the session's hold time."
|
|
::= { rcMplsLdpSessionEntry 12 }
|
|
|
|
rcMplsLdpSessionUpTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the session's up time."
|
|
::= { rcMplsLdpSessionEntry 13 }
|
|
|
|
rcMplsLdpSessionMessagesSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the session total messages sent."
|
|
::= { rcMplsLdpSessionEntry 14 }
|
|
|
|
rcMplsLdpSessionMessagesRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the session total messages received."
|
|
::= { rcMplsLdpSessionEntry 15 }
|
|
|
|
-- For 'show mpls ldp interface' command
|
|
rcMplsLdpInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsLdpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls ldp interface."
|
|
::= { rcMplsLdpGroup 7 }
|
|
|
|
rcMplsLdpInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcMplsLdpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls ldp interface table."
|
|
INDEX { rcMplsLdpInterfaceIfIndex }
|
|
::= { rcMplsLdpInterfaceTable 1 }
|
|
|
|
RcMplsLdpInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcMplsLdpInterfaceIfIndex InterfaceIndex,
|
|
rcMplsLdpInterfaceNbrCount Unsigned32,
|
|
rcMplsLdpInterfaceNextHello Unsigned32,
|
|
rcMplsLdpInterfaceConfHoldTime Unsigned32,
|
|
rcMplsLdpInterfaceNegHoldTime Unsigned32,
|
|
rcMplsLdpInterfaceHelloInterval Unsigned32
|
|
}
|
|
|
|
rcMplsLdpInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP interface if index."
|
|
::= { rcMplsLdpInterfaceEntry 1 }
|
|
|
|
rcMplsLdpInterfaceNbrCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the number of neighbors."
|
|
::= { rcMplsLdpInterfaceEntry 2 }
|
|
|
|
rcMplsLdpInterfaceNextHello OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the next hello time."
|
|
::= { rcMplsLdpInterfaceEntry 3 }
|
|
|
|
rcMplsLdpInterfaceConfHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the configured hello hold time."
|
|
::= { rcMplsLdpInterfaceEntry 4 }
|
|
|
|
rcMplsLdpInterfaceNegHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the negotiated hello hold time."
|
|
::= { rcMplsLdpInterfaceEntry 5 }
|
|
|
|
rcMplsLdpInterfaceHelloInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is one third of the negotiated hello hold time."
|
|
::= { rcMplsLdpInterfaceEntry 6 }
|
|
|
|
-- For 'show mpls ldp statistics' command
|
|
rcMplsLdpStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMplsLdpStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the table of mpls ldp statistics."
|
|
::= { rcMplsLdpGroup 8 }
|
|
|
|
rcMplsLdpStatsEntry OBJECT-TYPE
|
|
SYNTAX RcMplsLdpStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the mpls ldp statistics table."
|
|
INDEX { rcMplsLdpStatsPeerAddress }
|
|
::= { rcMplsLdpStatsTable 1 }
|
|
|
|
RcMplsLdpStatsEntry ::=
|
|
SEQUENCE {
|
|
rcMplsLdpStatsPeerAddress IpAddress,
|
|
rcMplsLdpStatsNotifyRecv Counter32,
|
|
rcMplsLdpStatsNotifySent Counter32,
|
|
rcMplsLdpStatsHelloRecv Counter32,
|
|
rcMplsLdpStatsHelloSent Counter32,
|
|
rcMplsLdpStatsInitRecv Counter32,
|
|
rcMplsLdpStatsInitSent Counter32,
|
|
rcMplsLdpStatsKeepRecv Counter32,
|
|
rcMplsLdpStatsKeepSent Counter32,
|
|
rcMplsLdpStatsAddrRecv Counter32,
|
|
rcMplsLdpStatsAddrSent Counter32,
|
|
rcMplsLdpStatsAddrWdrRecv Counter32,
|
|
rcMplsLdpStatsAddrWdrSent Counter32,
|
|
rcMplsLdpStatsLabelMapRecv Counter32,
|
|
rcMplsLdpStatsLabelMapSent Counter32,
|
|
rcMplsLdpStatsLabelReqRecv Counter32,
|
|
rcMplsLdpStatsLabelReqSent Counter32,
|
|
rcMplsLdpStatsLabelWdrRecv Counter32,
|
|
rcMplsLdpStatsLabelWdrSent Counter32,
|
|
rcMplsLdpStatsLabelRelRecv Counter32,
|
|
rcMplsLdpStatsLabelRelSent Counter32,
|
|
rcMplsLdpStatsLabelAbrRecv Counter32,
|
|
rcMplsLdpStatsLabelAbrSent Counter32,
|
|
rcMplsLdpStatsSessionUp Counter32,
|
|
rcMplsLdpStatsSessionDown Counter32,
|
|
rcMplsLdpStatsBadLdpIdentifierErrors Counter32,
|
|
rcMplsLdpStatsBadPduLengthErrors Counter32,
|
|
rcMplsLdpStatsBadMessageLengthErrors Counter32,
|
|
rcMplsLdpStatsUnknownMessageErrors Counter32,
|
|
rcMplsLdpStatsUnknownTlvErrors Counter32,
|
|
rcMplsLdpStatsBadTlvLengthErrors Counter32,
|
|
rcMplsLdpStatsMalformedTlvValueErrors Counter32,
|
|
rcMplsLdpStatsHoldTimerExpErrors Counter32,
|
|
rcMplsLdpStatsSessionRejectedNoHelloErrors Counter32,
|
|
rcMplsLdpStatsSessionRejectedBadParmAdvErrors Counter32,
|
|
rcMplsLdpStatsSessionRejectedMaxPduErrors Counter32,
|
|
rcMplsLdpStatsSessionRejectedBadLabelRangeErrors Counter32,
|
|
rcMplsLdpStatsSessionRejectedSetupAbortErrors Counter32,
|
|
rcMplsLdpStatsSessionRejectedBadKeepaliveErrors Counter32,
|
|
rcMplsLdpStatsSessionOtherErrors Counter32,
|
|
rcMplsLdpStatsClear TruthValue
|
|
}
|
|
|
|
rcMplsLdpStatsPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This is the LDP Peer Address key for search. This value
|
|
can be a valid peer address or 0.0.0.0. If 0.0.0.0
|
|
then global LDP statistics are retrieved."
|
|
::= { rcMplsLdpStatsEntry 1 }
|
|
|
|
rcMplsLdpStatsNotifyRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of notifications received."
|
|
::= { rcMplsLdpStatsEntry 2 }
|
|
|
|
rcMplsLdpStatsNotifySent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of notifications sent."
|
|
::= { rcMplsLdpStatsEntry 3 }
|
|
|
|
rcMplsLdpStatsHelloRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of hellos received."
|
|
::= { rcMplsLdpStatsEntry 4 }
|
|
|
|
rcMplsLdpStatsHelloSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of hellos sent."
|
|
::= { rcMplsLdpStatsEntry 5 }
|
|
|
|
rcMplsLdpStatsInitRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of initializations received."
|
|
::= { rcMplsLdpStatsEntry 6 }
|
|
|
|
rcMplsLdpStatsInitSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of initializations sent."
|
|
::= { rcMplsLdpStatsEntry 7 }
|
|
|
|
rcMplsLdpStatsKeepRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of keep alives received."
|
|
::= { rcMplsLdpStatsEntry 8 }
|
|
|
|
rcMplsLdpStatsKeepSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of keep alives sent."
|
|
::= { rcMplsLdpStatsEntry 9 }
|
|
|
|
rcMplsLdpStatsAddrRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of addrs received."
|
|
::= { rcMplsLdpStatsEntry 10 }
|
|
|
|
rcMplsLdpStatsAddrSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of addrs sent."
|
|
::= { rcMplsLdpStatsEntry 11 }
|
|
|
|
rcMplsLdpStatsAddrWdrRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of addr withdraws received."
|
|
::= { rcMplsLdpStatsEntry 12 }
|
|
|
|
rcMplsLdpStatsAddrWdrSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of addr withdraws sent."
|
|
::= { rcMplsLdpStatsEntry 13 }
|
|
|
|
rcMplsLdpStatsLabelMapRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label maps received."
|
|
::= { rcMplsLdpStatsEntry 14 }
|
|
|
|
rcMplsLdpStatsLabelMapSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label maps sent."
|
|
::= { rcMplsLdpStatsEntry 15 }
|
|
|
|
rcMplsLdpStatsLabelReqRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label reqs received."
|
|
::= { rcMplsLdpStatsEntry 16 }
|
|
|
|
rcMplsLdpStatsLabelReqSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label reqs sent."
|
|
::= { rcMplsLdpStatsEntry 17 }
|
|
|
|
rcMplsLdpStatsLabelWdrRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label withdraws received."
|
|
::= { rcMplsLdpStatsEntry 18 }
|
|
|
|
rcMplsLdpStatsLabelWdrSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label withdraws sent."
|
|
::= { rcMplsLdpStatsEntry 19 }
|
|
|
|
rcMplsLdpStatsLabelRelRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label withdraws received."
|
|
::= { rcMplsLdpStatsEntry 20 }
|
|
|
|
rcMplsLdpStatsLabelRelSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label withdraws sent."
|
|
::= { rcMplsLdpStatsEntry 21 }
|
|
|
|
rcMplsLdpStatsLabelAbrRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label aborts received."
|
|
::= { rcMplsLdpStatsEntry 22 }
|
|
|
|
rcMplsLdpStatsLabelAbrSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of label aborts sent."
|
|
::= { rcMplsLdpStatsEntry 23 }
|
|
|
|
rcMplsLdpStatsSessionUp OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of session up."
|
|
::= { rcMplsLdpStatsEntry 24 }
|
|
|
|
rcMplsLdpStatsSessionDown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of session down."
|
|
::= { rcMplsLdpStatsEntry 25 }
|
|
|
|
rcMplsLdpStatsBadLdpIdentifierErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of bad LDP ID errors."
|
|
::= { rcMplsLdpStatsEntry 26 }
|
|
|
|
rcMplsLdpStatsBadPduLengthErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of Bad PDU length
|
|
errors."
|
|
::= { rcMplsLdpStatsEntry 27 }
|
|
|
|
rcMplsLdpStatsBadMessageLengthErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of bad message length
|
|
errors."
|
|
::= { rcMplsLdpStatsEntry 28 }
|
|
|
|
rcMplsLdpStatsUnknownMessageErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of unknown message
|
|
errors."
|
|
::= { rcMplsLdpStatsEntry 29 }
|
|
|
|
rcMplsLdpStatsUnknownTlvErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of unknown TLV errors."
|
|
::= { rcMplsLdpStatsEntry 30 }
|
|
|
|
rcMplsLdpStatsBadTlvLengthErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of bad TLV Length errors."
|
|
::= { rcMplsLdpStatsEntry 31 }
|
|
|
|
rcMplsLdpStatsMalformedTlvValueErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of Malinformed TLV
|
|
value errors."
|
|
::= { rcMplsLdpStatsEntry 32 }
|
|
|
|
rcMplsLdpStatsHoldTimerExpErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of hold time
|
|
expired errors."
|
|
::= { rcMplsLdpStatsEntry 33 }
|
|
|
|
rcMplsLdpStatsSessionRejectedNoHelloErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of session reject -
|
|
no hello errors."
|
|
::= { rcMplsLdpStatsEntry 34 }
|
|
|
|
rcMplsLdpStatsSessionRejectedBadParmAdvErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of session reject -
|
|
bad parameter advertisement errors."
|
|
::= { rcMplsLdpStatsEntry 35 }
|
|
|
|
rcMplsLdpStatsSessionRejectedMaxPduErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of session reject -
|
|
Max PDU Errors."
|
|
::= { rcMplsLdpStatsEntry 36 }
|
|
|
|
rcMplsLdpStatsSessionRejectedBadLabelRangeErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of session reject -
|
|
Bad Label Range errors."
|
|
::= { rcMplsLdpStatsEntry 37 }
|
|
|
|
rcMplsLdpStatsSessionRejectedSetupAbortErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of session reject -
|
|
Setup Abort errors."
|
|
::= { rcMplsLdpStatsEntry 38 }
|
|
|
|
rcMplsLdpStatsSessionRejectedBadKeepaliveErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of session reject -
|
|
Bad Keepalive Errors."
|
|
::= { rcMplsLdpStatsEntry 39 }
|
|
|
|
rcMplsLdpStatsSessionOtherErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is the count of other errors."
|
|
::= { rcMplsLdpStatsEntry 40 }
|
|
|
|
rcMplsLdpStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear LDP Statistics for the Peer."
|
|
DEFVAL { false }
|
|
::= { rcMplsLdpStatsEntry 41 }
|
|
|
|
-- Notification Objects group within the MPLS MIB
|
|
--
|
|
-- MPLS LDP Trap Enable/Disable Flags
|
|
--
|
|
rcMplsLdpStatusNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If this object is true, then it enables the
|
|
generation of LDP Session Up or Down Traps,
|
|
otherwise these traps are not emitted."
|
|
DEFVAL { false }
|
|
::= { rcMplsNotificationObjects 1 }
|
|
|
|
rcMplsLdpSessionThresholdNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If this object is true, then it enables the
|
|
generation of LDP Session Threshold Exceeded Traps,
|
|
otherwise these traps are not emitted."
|
|
DEFVAL { false }
|
|
::= { rcMplsNotificationObjects 2 }
|
|
|
|
rcMplsLdpPathVectorLimitNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If this object is true, then it enables the
|
|
generation of LDP Path Vector Limit Exceeded Traps,
|
|
otherwise these traps are not emitted."
|
|
DEFVAL { false }
|
|
::= { rcMplsNotificationObjects 3 }
|
|
|
|
--
|
|
-- MSDP Module
|
|
--
|
|
rcMsdpMib OBJECT IDENTIFIER ::= { rcMsdp 1 }
|
|
|
|
--
|
|
-- MSDP Node definitions
|
|
--
|
|
rcMsdpNotifications OBJECT IDENTIFIER ::= {rcMsdpMib 0}
|
|
rcMsdpObjects OBJECT IDENTIFIER ::= {rcMsdpMib 1}
|
|
rcMsdpNotificationObjects OBJECT IDENTIFIER ::= {rcMsdpMib 2}
|
|
|
|
--
|
|
-- Scalar objects
|
|
--
|
|
|
|
rcMsdpScalars OBJECT IDENTIFIER ::= {rcMsdpObjects 1}
|
|
|
|
rcMsdpRouteMapName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Route map name.
|
|
Transmit only the SA messages that meet the
|
|
match criteria in the route map name with a permit keyword.
|
|
It is used as the policy of the redistribute filter.
|
|
It can not be set when redistribute filter is disabled."
|
|
::= { rcMsdpScalars 1 }
|
|
|
|
rcMsdpRedistributeFilterEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable or disable the redistribute filter.
|
|
This filter is used to filter the
|
|
(S,G,RP) entries provided by PIM to MSDP."
|
|
DEFVAL { false }
|
|
::= { rcMsdpScalars 2 }
|
|
|
|
rcMsdpRedistributeFilterApply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Each time when making changes to the redistribute filter, it
|
|
will not take effect until it is applied."
|
|
DEFVAL { false }
|
|
::= { rcMsdpScalars 3 }
|
|
|
|
rcMsdpImplicitDefaultPeerEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable or disable the implicit default peer of MSDP.
|
|
If enabled,it will accept SA messages even if the Peer
|
|
RPF(Reverse Path Forwarding) rules fails, condition is
|
|
that there should be only one peer configured."
|
|
DEFVAL { false }
|
|
::= { rcMsdpScalars 4 }
|
|
|
|
rcMsdpSACacheStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Clear foreign SA-Cache entries."
|
|
DEFVAL {false}
|
|
::= { rcMsdpScalars 5 }
|
|
|
|
rcMsdpSACacheClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear foreign SA-Cache entries."
|
|
DEFVAL {false}
|
|
::= { rcMsdpScalars 6 }
|
|
|
|
|
|
rcMsdpStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear msdp statistics."
|
|
DEFVAL {false}
|
|
::= { rcMsdpScalars 7 }
|
|
|
|
|
|
|
|
--
|
|
-- The MSDP Peer table
|
|
--
|
|
|
|
rcMsdpPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMsdpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table that augments the management information in the
|
|
standard IETF msdpPeerTable."
|
|
::= { rcMsdpObjects 2 }
|
|
|
|
rcMsdpPeerEntry OBJECT-TYPE
|
|
SYNTAX RcMsdpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A set of additional management information augmenting that of
|
|
the standard IETF msdpPeerEntry."
|
|
AUGMENTS { msdpPeerEntry }
|
|
::= { rcMsdpPeerTable 1 }
|
|
|
|
RcMsdpPeerEntry ::= SEQUENCE {
|
|
rcMsdpPeerAsNumber Integer32,
|
|
rcMsdpPeerTooShortMessages Counter32,
|
|
rcMsdpPeerInBadMessages Counter32,
|
|
rcMsdpPeerInKeepAliveMessages Counter32,
|
|
rcMsdpPeerOutKeepAliveMessages Counter32,
|
|
rcMsdpPeerInSAFilterEnabled TruthValue,
|
|
rcMsdpPeerInSAFilterRouteMapName SnmpAdminString,
|
|
rcMsdpPeerOutSAFilterEnabled TruthValue,
|
|
rcMsdpPeerOutSAFilterRouteMapName SnmpAdminString,
|
|
rcMsdpPeerDescription SnmpAdminString,
|
|
rcMsdpPeerSALimit Unsigned32,
|
|
rcMsdpPeerMd5AuthEnabled TruthValue,
|
|
rcMsdpPeerMd5AuthPassword SnmpAdminString,
|
|
rcMsdpPeerSAsLearnedFromThisPeer Counter32,
|
|
rcMsdpPeerSAsAdvertisedToThisPeer Counter32,
|
|
rcMsdpPeerUpOrDownTime TimeTicks,
|
|
rcMsdpPeerConnAndStatsClearedTime TimeTicks,
|
|
rcMsdpPeerRouteMapName SnmpAdminString,
|
|
rcMsdpPeerAdminEnabled TruthValue,
|
|
rcMsdpPeerOperEnabled TruthValue,
|
|
rcMsdpPeerDefaultPeerState INTEGER,
|
|
rcMsdpPeerDefaultPeer TruthValue,
|
|
rcMsdpPeerClearPeer TruthValue,
|
|
rcMsdpPeer4ByteAsNumber InetAutonomousSystemNumber
|
|
}
|
|
|
|
rcMsdpPeerAsNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION "The AS number of the remote Peer.
|
|
Value -1 indicates that AS number is not configured.
|
|
This is deprecated by rcMsdpPeer4ByteAsNumber."
|
|
::= { rcMsdpPeerEntry 1 }
|
|
|
|
rcMsdpPeerTooShortMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Short messages received from this peer."
|
|
::= { rcMsdpPeerEntry 2 }
|
|
|
|
rcMsdpPeerInBadMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Bad MSDP messages received from this peer."
|
|
::= { rcMsdpPeerEntry 3 }
|
|
|
|
rcMsdpPeerInKeepAliveMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of keep alive messages received from this peer."
|
|
::= { rcMsdpPeerEntry 4 }
|
|
|
|
rcMsdpPeerOutKeepAliveMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of keep alive messages transmitted to this peer."
|
|
::= { rcMsdpPeerEntry 5 }
|
|
|
|
rcMsdpPeerInSAFilterEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable or disable the in SA filter of a peer."
|
|
DEFVAL { false }
|
|
::= { rcMsdpPeerEntry 6 }
|
|
|
|
rcMsdpPeerInSAFilterRouteMapName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The route Map name of IN SA Filter.
|
|
If route map name is configured,
|
|
it Accepts only the SA messages that meet the match criteria in the route
|
|
map map-name with a permit keyword.
|
|
If access route map name is not configured,
|
|
all inbound SA messages from this peer will be blocked."
|
|
::= { rcMsdpPeerEntry 7 }
|
|
|
|
rcMsdpPeerOutSAFilterEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To enable or disable the out SA filter of a peer."
|
|
DEFVAL { false }
|
|
::= { rcMsdpPeerEntry 8 }
|
|
|
|
rcMsdpPeerOutSAFilterRouteMapName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The route Map name of OUT SA Filter.
|
|
If route map name is configured,
|
|
it sends only the SA messages that meet the match criteria
|
|
in the route map map-name with a permit keyword.
|
|
If access route map name is not configured,
|
|
all outbound SA messages sent to this peer will be blocked"
|
|
::= { rcMsdpPeerEntry 9 }
|
|
|
|
rcMsdpPeerDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Peer specific description. It is used to make the peer
|
|
easier to be identified."
|
|
::= { rcMsdpPeerEntry 10 }
|
|
|
|
rcMsdpPeerSALimit OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..6144)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SA Cache limit for this peer."
|
|
::= { rcMsdpPeerEntry 11 }
|
|
|
|
rcMsdpPeerMd5AuthEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The MD5 Authentication status of this peer."
|
|
DEFVAL { false }
|
|
::= { rcMsdpPeerEntry 12 }
|
|
|
|
rcMsdpPeerMd5AuthPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The MD5 Authentication password of this peer."
|
|
::= { rcMsdpPeerEntry 13 }
|
|
|
|
rcMsdpPeerSAsLearnedFromThisPeer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SAs learned from this peer."
|
|
::= { rcMsdpPeerEntry 14 }
|
|
|
|
rcMsdpPeerSAsAdvertisedToThisPeer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SAs advertised to this peer."
|
|
::= { rcMsdpPeerEntry 15 }
|
|
|
|
rcMsdpPeerUpOrDownTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MSDP Peer Up or Down duration."
|
|
::= { rcMsdpPeerEntry 16 }
|
|
|
|
rcMsdpPeerConnAndStatsClearedTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The duration of connection and statistics cleared ago."
|
|
::= { rcMsdpPeerEntry 17 }
|
|
|
|
rcMsdpPeerRouteMapName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Route map name for default peer."
|
|
::= { rcMsdpPeerEntry 18 }
|
|
|
|
rcMsdpPeerAdminEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The admin status of this peer."
|
|
DEFVAL { false }
|
|
::= { rcMsdpPeerEntry 19 }
|
|
|
|
rcMsdpPeerOperEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operational status of this peer."
|
|
::= { rcMsdpPeerEntry 20 }
|
|
|
|
rcMsdpPeerDefaultPeerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
configured(1),
|
|
operational(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The default peer has two state: Configured and Operational.
|
|
MSDP node only accept SA messages from the Operational default peer.
|
|
These is only one default peer can become Operational, all the Configured
|
|
default peers are for redundancy."
|
|
::= { rcMsdpPeerEntry 21 }
|
|
|
|
rcMsdpPeerDefaultPeer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "It is used to indicate whether a peer is a default peer or not."
|
|
DEFVAL { false }
|
|
::= { rcMsdpPeerEntry 22 }
|
|
|
|
rcMsdpPeerClearPeer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "It is an operational object. It is used to determine whether
|
|
the TCP connection for the specified peer will be cleared or not. The
|
|
returned value will be always `false` for query."
|
|
DEFVAL { false }
|
|
::= { rcMsdpPeerEntry 23 }
|
|
|
|
rcMsdpPeer4ByteAsNumber OBJECT-TYPE
|
|
SYNTAX InetAutonomousSystemNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The AS number of the remote Peer.
|
|
The value of the default AS number is 0.
|
|
This object replaces rcMsdpPeerAsNumber."
|
|
::= { rcMsdpPeerEntry 24 }
|
|
|
|
rcMsdpSACacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMsdpSACacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SA (Source Active) - Cache Table. This table contains
|
|
foreign as well as local SA Cache entries. Foreign SA Cache
|
|
entries from this table will have corresponding entries in
|
|
the standard table msdpSACacheTable"
|
|
::= { rcMsdpObjects 3 }
|
|
|
|
rcMsdpSACacheEntry OBJECT-TYPE
|
|
SYNTAX RcMsdpSACacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SA Cache Entry."
|
|
INDEX { rcMsdpSACacheGroupAddr, rcMsdpSACacheSourceAddr,
|
|
rcMsdpSACacheOriginRP, rcMsdpSACacheTypeInformation}
|
|
|
|
::= { rcMsdpSACacheTable 1 }
|
|
|
|
RcMsdpSACacheEntry ::= SEQUENCE {
|
|
rcMsdpSACacheGroupAddr IpAddress,
|
|
rcMsdpSACacheSourceAddr IpAddress,
|
|
rcMsdpSACacheOriginRP IpAddress,
|
|
rcMsdpSACacheTypeInformation INTEGER,
|
|
rcMsdpSACacheOriginatorAsNumber Unsigned32,
|
|
rcMsdpSACacheRouteType INTEGER
|
|
}
|
|
|
|
rcMsdpSACacheGroupAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of the SA Cache entry."
|
|
::= { rcMsdpSACacheEntry 1 }
|
|
|
|
rcMsdpSACacheSourceAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of the SA Cache entry."
|
|
::= { rcMsdpSACacheEntry 2 }
|
|
|
|
rcMsdpSACacheOriginRP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP of the SA Cache entry. This field is in the INDEX
|
|
in order to catch multiple RP's advertising the same
|
|
source and group."
|
|
::= { rcMsdpSACacheEntry 3 }
|
|
|
|
rcMsdpSACacheTypeInformation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
foreign(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the SA cache type.
|
|
It can be either local cache or foreign cache."
|
|
::= { rcMsdpSACacheEntry 4 }
|
|
|
|
rcMsdpSACacheOriginatorAsNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The AS number of the originator."
|
|
::= { rcMsdpSACacheEntry 5 }
|
|
|
|
rcMsdpSACacheRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rip(1),
|
|
ospf(2),
|
|
static(3),
|
|
bgp(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The owner of the route that is used for rpf checking."
|
|
::= { rcMsdpSACacheEntry 6 }
|
|
|
|
--
|
|
-- The MSDP Source-Active Cache Records table
|
|
--
|
|
|
|
rcMsdpSACacheRecordsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMsdpSACacheRecordsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SA (Source Active) - Cache Records Table. This table contains
|
|
foreign as well as local SA Cache entries. Foreign SA Cache
|
|
entries from this table will have corresponding entries in
|
|
the standard table msdpSACacheTable"
|
|
::= { rcMsdpObjects 4 }
|
|
|
|
rcMsdpSACacheRecordsEntry OBJECT-TYPE
|
|
SYNTAX RcMsdpSACacheRecordsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SA Cache Entry."
|
|
|
|
INDEX { rcMsdpSACacheRecordsTypeInformation, rcMsdpSACacheRecordsGroupAddr,
|
|
rcMsdpSACacheRecordsSourceAddr, rcMsdpSACacheRecordsOriginRP }
|
|
::= { rcMsdpSACacheRecordsTable 1 }
|
|
|
|
RcMsdpSACacheRecordsEntry ::= SEQUENCE {
|
|
rcMsdpSACacheRecordsTypeInformation INTEGER,
|
|
rcMsdpSACacheRecordsGroupAddr IpAddress,
|
|
rcMsdpSACacheRecordsSourceAddr IpAddress,
|
|
rcMsdpSACacheRecordsOriginRP IpAddress,
|
|
rcMsdpSACacheRecordsOriginatorAsNumber Unsigned32,
|
|
rcMsdpSACacheRecordsRouteType INTEGER,
|
|
rcMsdpSACacheRecordsOriginatorAsNum Integer32
|
|
}
|
|
|
|
rcMsdpSACacheRecordsTypeInformation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
foreign(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the SA cache type.
|
|
It can be either local cache or foreign cache."
|
|
::= { rcMsdpSACacheRecordsEntry 1 }
|
|
|
|
|
|
rcMsdpSACacheRecordsGroupAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address of the SA Cache entry."
|
|
::= { rcMsdpSACacheRecordsEntry 2 }
|
|
|
|
rcMsdpSACacheRecordsSourceAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of the SA Cache entry."
|
|
::= { rcMsdpSACacheRecordsEntry 3 }
|
|
|
|
rcMsdpSACacheRecordsOriginRP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP of the SA Cache entry. This field is in the INDEX
|
|
in order to catch multiple RP's advertising the same
|
|
source and group."
|
|
::= { rcMsdpSACacheRecordsEntry 4 }
|
|
|
|
rcMsdpSACacheRecordsOriginatorAsNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "The AS number of the originator. This attribute is
|
|
obsoleted."
|
|
::= { rcMsdpSACacheRecordsEntry 5 }
|
|
|
|
rcMsdpSACacheRecordsRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rip(1),
|
|
ospf(2),
|
|
static(3),
|
|
bgp(4),
|
|
isis(5),
|
|
none(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The owner of the route that is used for rpf checking."
|
|
::= { rcMsdpSACacheRecordsEntry 6 }
|
|
|
|
rcMsdpSACacheRecordsOriginatorAsNum OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The AS number of the originator. This object is used to
|
|
obsolete rcMsdpSACacheRecordsOriginatorAsNumber.
|
|
Value -1 indicates that AS number is not configured."
|
|
::= { rcMsdpSACacheRecordsEntry 7 }
|
|
|
|
--
|
|
-- Notification Objects
|
|
--
|
|
|
|
rcMsdpSACacheType OBJECT-TYPE
|
|
SYNTAX INTEGER { local(1),
|
|
foreign(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This object describes the SA cache type."
|
|
::= { rcMsdpNotificationObjects 1 }
|
|
|
|
rcMsdpVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "VRF ID for the MSDP."
|
|
::= { rcMsdpNotificationObjects 2 }
|
|
|
|
rcnMsdpMaxSACacheWarnSet NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpSACacheType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries in the cache database
|
|
exceeds 85 % of maximum value (6K) in local cache or in foreign cache."
|
|
::= {rcMsdpNotifications 1}
|
|
|
|
rcnMsdpMaxSACacheWarnClear NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpSACacheType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the Sa entries in the cache database
|
|
drops to 80 % of the maximum value (6K)."
|
|
::= {rcMsdpNotifications 2}
|
|
|
|
rcnMsdpMaxSACacheErrorSet NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpSACacheType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries in the cache database
|
|
hits 100 % of the maximum value (6K)."
|
|
::= {rcMsdpNotifications 3}
|
|
|
|
rcnMsdpMaxSACacheErrorClear NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpSACacheType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries in the cache database
|
|
drops to 95% of the maximum value."
|
|
::= {rcMsdpNotifications 4}
|
|
|
|
rcnMsdpMaxPeerSACacheWarnSet NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpPeerSALimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries for this peer exceeds
|
|
85 % of maximum value configured for this peer."
|
|
::= {rcMsdpNotifications 5}
|
|
|
|
rcnMsdpMaxPeerSACacheWarnClear NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpPeerSALimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries for this peer drops to
|
|
80 % of the maximum value configured for this peer."
|
|
::= {rcMsdpNotifications 6}
|
|
|
|
rcnMsdpMaxPeerSACacheErrorSet NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpPeerSALimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries for this peer hits 100 %
|
|
of the peer SA limit."
|
|
::= {rcMsdpNotifications 7}
|
|
|
|
rcnMsdpMaxPeerSACacheErrorClear NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
rcMsdpPeerSALimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "This event is generated when the SA entries for this peer drops to 95%
|
|
of the peer SA limit."
|
|
::= {rcMsdpNotifications 8}
|
|
|
|
rcnMsdpEstablished NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
msdpPeerFsmEstablishedTransitions
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The MSDP Established event is generated when the MSDP FSM
|
|
enters the ESTABLISHED state."
|
|
::= { rcMsdpNotifications 9 }
|
|
|
|
rcnMsdpBackwardTransition NOTIFICATION-TYPE
|
|
OBJECTS { rcMsdpVrfId,
|
|
msdpPeerState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The MSDPBackwardTransition Event is generated when the
|
|
MSDP FSM moves from a higher-numbered state to a
|
|
lower-numbered state."
|
|
::= { rcMsdpNotifications 10 }
|
|
|
|
--
|
|
-- Notification Objects
|
|
--
|
|
|
|
rcMsdpSACacheType OBJECT-TYPE
|
|
SYNTAX INTEGER { local(1),
|
|
foreign(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This object describes the SA cache type."
|
|
::= { rcMsdpNotificationObjects 1 }
|
|
|
|
rcMsdpVrfId OBJECT-TYPE
|
|
SYNTAX VrfIdentifier
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "VRF ID for the MSDP."
|
|
::= { rcMsdpNotificationObjects 2 }
|
|
|
|
-- This MIB defines the serial information that can be read from
|
|
-- SFPs and SFPs including the vendor specific Nortel supplied data.
|
|
-- The INF-8074i SFP MSA and the SFF-8053 SFP specifications defined
|
|
-- the first 256 bytes of serial ID information. The SFF-8472
|
|
-- standard adds new options to those previously defined and adds
|
|
-- new transceiver types. The SFF-8472 standard also defines an
|
|
-- enhanced digital diagnostic monitoring interface for optical
|
|
-- devices which allows real-time access to device operating
|
|
-- parameters.
|
|
--
|
|
-- If the target device supports the SFF-8472 standard, there is an
|
|
-- extra 256 bit address space. Pertinant information from that
|
|
-- space is also described here.
|
|
-- TXT about XFPs
|
|
|
|
|
|
rcPlugOptModTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPlugOptModEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Gbic SFF diagnostic info table"
|
|
::= { rcPlugOptMod 1 }
|
|
|
|
rcPlugOptModEntry OBJECT-TYPE
|
|
SYNTAX RcPlugOptModEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular port"
|
|
INDEX { rcPlugOptModPortIndex }
|
|
::= { rcPlugOptModTable 1 }
|
|
|
|
RcPlugOptModEntry ::= SEQUENCE {
|
|
rcPlugOptModPortIndex InterfaceIndex, -- 1
|
|
|
|
-- Control information:
|
|
|
|
rcPlugOptModDdmStatusMask BITS, -- 2
|
|
rcPlugOptModCalibration INTEGER, -- 3
|
|
rcPlugOptModPowerMeasure INTEGER, -- 4
|
|
rcPlugOptModConnectorType DisplayString, -- 5 ; 16+1
|
|
rcPlugOptModVendorName DisplayString, -- 6 ; 16+1
|
|
rcPlugOptModVendorPartNumber DisplayString, -- 7 ; 16+1
|
|
rcPlugOptModVendorRevNumber DisplayString, -- 8 ; 4+1
|
|
rcPlugOptModVendorSN DisplayString, -- 9 ; 16+1
|
|
rcPlugOptModVendorDateCode DisplayString, -- 10; 8+1
|
|
|
|
-- Vendor information:
|
|
|
|
rcPlugOptModPEC DisplayString, -- 11 ;16+1
|
|
rcPlugOptModCLEI DisplayString, -- 12 ;10+1
|
|
rcPlugOptModSupportsDDM TruthValue, -- 13
|
|
rcPlugOptModAux1Monitoring INTEGER, -- 14
|
|
rcPlugOptModAux2Monitoring INTEGER, -- 15
|
|
rcPlugOptModWaveLength Integer32, -- 16
|
|
|
|
-- The DDM information:
|
|
|
|
rcPlugOptModTemperature INTEGER, -- 17
|
|
rcPlugOptModTemperatureHighAlarmThreshold INTEGER, -- 18
|
|
rcPlugOptModTemperatureLowAlarmThreshold INTEGER, -- 19
|
|
rcPlugOptModTemperatureHighWarningThreshold INTEGER, -- 20
|
|
rcPlugOptModTemperatureLowWarningThreshold INTEGER, -- 21
|
|
rcPlugOptModVoltage INTEGER, -- 22
|
|
rcPlugOptModVoltageHighAlarmThreshold INTEGER, -- 23
|
|
rcPlugOptModVoltageLowAlarmThreshold INTEGER, -- 24
|
|
rcPlugOptModVoltageHighWarningThreshold INTEGER, -- 25
|
|
rcPlugOptModVoltageLowWarningThreshold INTEGER, -- 26
|
|
rcPlugOptModBias INTEGER, -- 27
|
|
rcPlugOptModBiasHighAlarmThreshold INTEGER, -- 28
|
|
rcPlugOptModBiasLowAlarmThreshold INTEGER, -- 29
|
|
rcPlugOptModBiasHighWarningThreshold INTEGER, -- 30
|
|
rcPlugOptModBiasLowWarningThreshold INTEGER, -- 31
|
|
rcPlugOptModTxPower INTEGER, -- 32
|
|
rcPlugOptModTxPowerHighAlarmThreshold INTEGER, -- 33
|
|
rcPlugOptModTxPowerLowAlarmThreshold INTEGER, -- 34
|
|
rcPlugOptModTxPowerHighWarningThreshold INTEGER, -- 35
|
|
rcPlugOptModTxPowerLowWarningThreshold INTEGER, -- 36
|
|
rcPlugOptModRxPower INTEGER, -- 37
|
|
rcPlugOptModRxPowerHighAlarmThreshold INTEGER, -- 38
|
|
rcPlugOptModRxPowerLowAlarmThreshold INTEGER, -- 39
|
|
rcPlugOptModRxPowerHighWarningThreshold INTEGER, -- 40
|
|
rcPlugOptModRxPowerLowWarningThreshold INTEGER, -- 41
|
|
rcPlugOptModAux1 INTEGER, -- 42
|
|
rcPlugOptModAux1HighAlarmThreshold INTEGER, -- 43
|
|
rcPlugOptModAux1LowAlarmThreshold INTEGER, -- 44
|
|
rcPlugOptModAux1HighWarningThreshold INTEGER, -- 45
|
|
rcPlugOptModAux1LowWarningThreshold INTEGER, -- 46
|
|
rcPlugOptModAux2 INTEGER, -- 47
|
|
rcPlugOptModAux2HighAlarmThreshold INTEGER, -- 48
|
|
rcPlugOptModAux2LowAlarmThreshold INTEGER, -- 49
|
|
rcPlugOptModAux2HighWarningThreshold INTEGER, -- 50
|
|
rcPlugOptModAux2LowWarningThreshold INTEGER, -- 51
|
|
|
|
rcPlugOptModTemperatureStatus INTEGER, -- 52
|
|
rcPlugOptModVoltageStatus INTEGER, -- 53
|
|
rcPlugOptModBiasStatus INTEGER, -- 54
|
|
rcPlugOptModTxPowerStatus INTEGER, -- 55
|
|
rcPlugOptModRxPowerStatus INTEGER, -- 56
|
|
rcPlugOptModAux1Status INTEGER, -- 57
|
|
rcPlugOptModAux2Status INTEGER, -- 58
|
|
|
|
-- The DDM information for 40G(QSFPs):
|
|
rcPlugOptModQSFPTx1Bias Integer32, -- 59
|
|
rcPlugOptModQSFPTx2Bias Integer32, -- 60
|
|
rcPlugOptModQSFPTx3Bias Integer32, -- 61
|
|
rcPlugOptModQSFPTx4Bias Integer32, -- 62
|
|
rcPlugOptModQSFPTx1Power Integer32, -- 63
|
|
rcPlugOptModQSFPTx2Power Integer32, -- 64
|
|
rcPlugOptModQSFPTx3Power Integer32, -- 65
|
|
rcPlugOptModQSFPTx4Power Integer32, -- 76
|
|
rcPlugOptModQSFPRx1Power Integer32, -- 67
|
|
rcPlugOptModQSFPRx2Power Integer32, -- 68
|
|
rcPlugOptModQSFPRx3Power Integer32, -- 69
|
|
rcPlugOptModQSFPRx4Power Integer32, -- 70
|
|
rcPlugOptModQSFPTx1BiasStatus INTEGER, -- 71
|
|
rcPlugOptModQSFPTx2BiasStatus INTEGER, -- 72
|
|
rcPlugOptModQSFPTx3BiasStatus INTEGER, -- 73
|
|
rcPlugOptModQSFPTx4BiasStatus INTEGER, -- 74
|
|
rcPlugOptModQSFPTx1PowerStatus INTEGER, -- 75
|
|
rcPlugOptModQSFPTx2PowerStatus INTEGER, -- 76
|
|
rcPlugOptModQSFPTx3PowerStatus INTEGER, -- 77
|
|
rcPlugOptModQSFPTx4PowerStatus INTEGER, -- 78
|
|
rcPlugOptModQSFPRx1PowerStatus INTEGER, -- 79
|
|
rcPlugOptModQSFPRx2PowerStatus INTEGER, -- 80
|
|
rcPlugOptModQSFPRx3PowerStatus INTEGER, -- 81
|
|
rcPlugOptModQSFPRx4PowerStatus INTEGER -- 82
|
|
}
|
|
|
|
rcPlugOptModPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port on a
|
|
blade or line-card."
|
|
::= { rcPlugOptModEntry 1 }
|
|
|
|
rcPlugOptModDdmStatusMask OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
ddm-ok(0),
|
|
ddm-checksum-error(1),
|
|
ddm-i2c-read-error(2),
|
|
ddm-threshold-error(3),
|
|
ddm-calibration-error(4),
|
|
ddm-avaya-checksum-error(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Each bit other than ddm-ok represents a specific error.
|
|
Any combination of error bits is allowed."
|
|
::= { rcPlugOptModEntry 2}
|
|
|
|
rcPlugOptModCalibration OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal (1),
|
|
external (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The identifier value indicates type of calibration."
|
|
::= { rcPlugOptModEntry 3}
|
|
|
|
rcPlugOptModPowerMeasure OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
omi (1),
|
|
average (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The identifier value indicates type of external power."
|
|
::= { rcPlugOptModEntry 4}
|
|
|
|
rcPlugOptModConnectorType OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The connector type is a 16 character field that
|
|
contains ASCII characters, left-aligned and padded
|
|
on the right with ASCII spaces. This is an assigned
|
|
name that indicates some characteristic of the
|
|
layer-1 interface."
|
|
::= { rcPlugOptModEntry 5 }
|
|
|
|
rcPlugOptModVendorName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The vendor name is a 16 character field that
|
|
contains ASCII characters, left-aligned and padded
|
|
on the right with ASCII spaces. The vendor name
|
|
shall be the full name of the corporation, a
|
|
commonly accepted abbreviation of the name, the
|
|
SCSI company code, or the stock exchange code for
|
|
the corporation."
|
|
::= { rcPlugOptModEntry 6 }
|
|
|
|
rcPlugOptModVendorPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The vendor part number is a 16 byte field that
|
|
contains ASCII characters, left-aligned and padded
|
|
on the right with ASCII spaces, defining the vendor
|
|
part number or product name."
|
|
::= { rcPlugOptModEntry 7 }
|
|
|
|
rcPlugOptModVendorRevNumber OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(5))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The vendor revision number is a 4-byte field that
|
|
contains ASCII characters, left-aligned and padded
|
|
on the right with ASCII spaces, defining the
|
|
vendor product revision number."
|
|
::= { rcPlugOptModEntry 8 }
|
|
|
|
rcPlugOptModVendorSN OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The vendor serial number is a 16 character field
|
|
that contains ASCII characters, left-aligned and
|
|
padded on the right with ASCII spaces, defining
|
|
the vendor serial number for the transceiver."
|
|
::= { rcPlugOptModEntry 9 }
|
|
|
|
rcPlugOptModVendorDateCode OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(9))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date code is an 8-byte field that contains the
|
|
vendor's date code in ASCII. This field is
|
|
mandatory and takes the form: YYMMDDLC where
|
|
YY is the 2 low order digits of the year (00=2000),
|
|
MM is the month, 01 thru 12,
|
|
DD is the day, 01 thru 31, and
|
|
LC is an optional vendor specific lot code."
|
|
::= { rcPlugOptModEntry 10 }
|
|
|
|
rcPlugOptModPEC OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a 16 byte left-justified ASCII field that
|
|
records the Nortel Product Equipment Code order
|
|
number for the module. Nortel part numbers are 9
|
|
bytes long, so the 10th through 16th byte should
|
|
be NULL."
|
|
::= { rcPlugOptModEntry 11 }
|
|
|
|
rcPlugOptModCLEI OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is a 10 byte left-justified ASCII field that
|
|
records the Nortel supplied Common Language
|
|
Equipment Identifier code for the device. The CLEI
|
|
code is a Telcordia human-readable representation
|
|
of the 1D barcode."
|
|
::= { rcPlugOptModEntry 12 }
|
|
|
|
rcPlugOptModSupportsDDM OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This boolean indicates whether or not the device
|
|
supports the DDM capability."
|
|
::= { rcPlugOptModEntry 13 }
|
|
|
|
rcPlugOptModAux1Monitoring OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value tells what Aux1 is measuring.The values are
|
|
as follows:
|
|
|
|
0 Auxiliary monitoring not implemented
|
|
1 APD Bias Voltage mV (units of 10 mV)
|
|
2 Reserved
|
|
3 TEC Current (mA)
|
|
4 Laser Temperature
|
|
5 Laser Wavelength
|
|
6 +5V Supply Voltage
|
|
7 +3.3V Supply Voltage
|
|
8 +1.8V Supply Voltage
|
|
9 -5.2V Supply Voltage
|
|
10 +5.0V Supply Current (unit of 100 uA)
|
|
13 +3.3V Supply Current (unit of 100 uA)
|
|
14 +1.8V Supply Current (unit of 100 uA)
|
|
15 -5.2V Supply Current (unit of 100 uA)
|
|
"
|
|
::= { rcPlugOptModEntry 14 }
|
|
|
|
rcPlugOptModAux2Monitoring OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value tells you what AUX2 is measuring.The values are
|
|
as follows:
|
|
|
|
0 Auxiliary monitoring not implemented
|
|
1 APD Bias Voltage mV (units of 10 mV)
|
|
2 Reserved
|
|
3 TEC Current (mA)
|
|
4 Laser Temperature
|
|
5 Laser Wavelength
|
|
6 +5V Supply Voltage
|
|
7 +3.3V Supply Voltage
|
|
8 +1.8V Supply Voltage
|
|
9 -5.2V Supply Voltage
|
|
10 +5.0V Supply Current (unit of 100 uA)
|
|
13 +3.3V Supply Current (unit of 100 uA)
|
|
14 +1.8V Supply Current (unit of 100 uA)
|
|
15 -5.2V Supply Current (unit of 100 uA)
|
|
"
|
|
::= { rcPlugOptModEntry 15 }
|
|
|
|
rcPlugOptModWaveLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Nominal transmitter output wavelength at room
|
|
temperature. It is expressed in nano-meters."
|
|
::= {rcPlugOptModEntry 16 }
|
|
|
|
|
|
-- These next variables represent either measured values or fixed
|
|
-- threshold values. Sometimes they involve an integer and a fractional
|
|
-- component and sometimes we may want to convert from mW to dBm.
|
|
-- So maybe what we have in the MIB definition is not the raw numeric
|
|
-- data but rather the ASCII representation of that data including a
|
|
-- minus sign, if necessary, and a decimal point in the right place.
|
|
-- In all cases, we need to display the calibrated data if external
|
|
-- calibration is being used. For temperature, voltage, bias current
|
|
-- and transmitter power, this involves multiplying the raw value by
|
|
-- a vendor specified slope constant (contained in the device EEPROM)
|
|
-- then adding a vendor specified offset (also contained in the device
|
|
-- EEPROM). For received power, it involves running the raw value
|
|
-- through a polynomial. The vendor specified coefficients for that
|
|
-- polynomial are contained in the device in IEEE 754 floating-point
|
|
-- format.
|
|
|
|
rcPlugOptModTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured
|
|
module temperature. It is expressed in units of
|
|
1/256 of a degree Celsius and can range from -40C
|
|
to +125C with 0.0001 accuracy.The most significant byte is
|
|
the signed integer part of the number and the
|
|
least significant byte is the fraction."
|
|
::= { rcPlugOptModEntry 17 }
|
|
|
|
rcPlugOptModTemperatureHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
temperature threshold. If the device
|
|
temperature exceeds this value, a temperature high
|
|
is asserted. It is expressed in the same
|
|
units as the measured temperature."
|
|
::= { rcPlugOptModEntry 18 }
|
|
|
|
rcPlugOptModTemperatureLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
temperature threshold. If the device
|
|
temperature falls below this value, a temperature
|
|
low is asserted. It is expressed in the same
|
|
units as the measured temperature."
|
|
::= { rcPlugOptModEntry 19 }
|
|
|
|
rcPlugOptModTemperatureHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
temperature warning threshold. If the device
|
|
temperature exceeds this value, a temperature high
|
|
warning is asserted. It is expressed in the same
|
|
units as the measured temperature."
|
|
::= { rcPlugOptModEntry 20 }
|
|
|
|
rcPlugOptModTemperatureLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
temperature warning threshold. If the device
|
|
temperature falls below this value, a temperature
|
|
low warning is asserted. It is expressed in the
|
|
same units as the measured temperature."
|
|
::= { rcPlugOptModEntry 21 }
|
|
|
|
rcPlugOptModVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured
|
|
supply voltage. It is a positive number expressed
|
|
in microvolts and can range from 0 to 65535 mV."
|
|
::= { rcPlugOptModEntry 22 }
|
|
|
|
rcPlugOptModVoltageHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
voltage threshold. If the measured voltage exceeds
|
|
this value, a high voltage is asserted. It
|
|
is a positive number expressed in microvolts."
|
|
::= { rcPlugOptModEntry 23 }
|
|
|
|
rcPlugOptModVoltageLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
voltage threshold. If the measured voltage falls
|
|
below this value, a low voltage is asserted.
|
|
It is a positive number expressed in microvolts."
|
|
::= { rcPlugOptModEntry 24 }
|
|
|
|
rcPlugOptModVoltageHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
voltage warning threshold. If the measured voltage
|
|
exceeds this value, a high voltage warning is
|
|
asserted. It is a positive number expressed in
|
|
microvolts."
|
|
::= { rcPlugOptModEntry 25 }
|
|
|
|
rcPlugOptModVoltageLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
voltage warning threshold. If the measured voltage
|
|
falls below this value, a low voltage warning is
|
|
asserted. It is a positive number expressed in
|
|
microvolts."
|
|
::= { rcPlugOptModEntry 26 }
|
|
|
|
rcPlugOptModBias OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured
|
|
transmitter laser bias current. It is a positive
|
|
number expressed in units of 0.1 microamp and can
|
|
range from 0 to 131 mA with +/-10% accuracy."
|
|
::= { rcPlugOptModEntry 27 }
|
|
|
|
rcPlugOptModBiasHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
current threshold. If the measured bias
|
|
current exceeds this value, a high current alarm
|
|
is asserted. It is a positive number expressed
|
|
in units of 0.1 microamp."
|
|
::= { rcPlugOptModEntry 28 }
|
|
|
|
rcPlugOptModBiasLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
current threshold. If the measured bias
|
|
current falls below this value, a low current
|
|
is asserted. It is a positive number
|
|
in units of 0.1 microamp."
|
|
::= { rcPlugOptModEntry 29 }
|
|
|
|
rcPlugOptModBiasHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
current warning threshold. If the measured bias
|
|
current exceeds this value, a high current warning
|
|
is asserted. It is a positive number expressed in
|
|
in units of 0.1 microamp."
|
|
::= { rcPlugOptModEntry 30 }
|
|
|
|
rcPlugOptModBiasLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
current warning threshold. If the measured bias
|
|
current falls below this value, a low current
|
|
warning is asserted. It is a positive number
|
|
in units of 0.1 microamp."
|
|
::= { rcPlugOptModEntry 31 }
|
|
|
|
-- For power readings, we should really display these values in dBm
|
|
-- CP code can convert from mW to dBm.
|
|
|
|
rcPlugOptModTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured
|
|
coupled TX output power. It is a positive number
|
|
expressed in units of micro watts and can range
|
|
from 0 to 65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 32 }
|
|
|
|
rcPlugOptModTxPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
transmit power threshold. If the measured
|
|
transmitter power exceeds this value, a
|
|
transmitter power high is asserted. It is
|
|
a positive number expressed in units of micro
|
|
watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 33 }
|
|
|
|
rcPlugOptModTxPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
transmit power threshold. If the measured
|
|
transmitter power falls below this value, a
|
|
transmitter power low is asserted. It is a
|
|
positive number expressed in units of micro watts
|
|
and can range from 0 to 65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 34 }
|
|
|
|
rcPlugOptModTxPowerHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
transmit power warning threshold. If the measured
|
|
transmitter power exceeds this value, a
|
|
transmitter power high warning is asserted. It is
|
|
a positive number expressed in units of
|
|
micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 35 }
|
|
|
|
rcPlugOptModTxPowerLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
transmit power warning threshold. If the measured
|
|
transmitter power falls below this value, a
|
|
transmitter power low warning is asserted. It is
|
|
a positive number expressed in units of micro
|
|
watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 36 }
|
|
|
|
rcPlugOptModRxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured
|
|
received power. It is a positive number expressed
|
|
in units of micro watts and can range from 0 to
|
|
65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 37 }
|
|
|
|
rcPlugOptModRxPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
receiver power threshold. If the measured
|
|
received power exceeds this value, a receiver
|
|
power high is asserted. It is a positive
|
|
number expressed in units of micro watts and can
|
|
range from 0 to 65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 38 }
|
|
|
|
rcPlugOptModRxPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
receiver power threshold. If the measured
|
|
received power falls below this value, a receiver
|
|
power low is asserted. It is a positive
|
|
number expressed in units of micro watts and can
|
|
range from 0 to 65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 39 }
|
|
|
|
rcPlugOptModRxPowerHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
receiver power warning threshold. If the measured
|
|
received power exceeds this value, a receiver
|
|
power high warning is asserted. It is a positive
|
|
number expressed in units of micro watts
|
|
and can range from 0 to 65.535 uW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 40 }
|
|
|
|
rcPlugOptModRxPowerLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
receiver power warning threshold. If the measured
|
|
received power falls below this value, a receiver
|
|
power low warning is asserted. It is a positive
|
|
number expressed in units of micro watts
|
|
and can range from 0 to 65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 41 }
|
|
|
|
rcPlugOptModAux1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This represents the internally measured A/D
|
|
value specified."
|
|
::= { rcPlugOptModEntry 42 }
|
|
|
|
rcPlugOptModAux1HighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
Aux1 threshold."
|
|
::= { rcPlugOptModEntry 43 }
|
|
|
|
rcPlugOptModAux1LowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
Aux1 threshold."
|
|
::= { rcPlugOptModEntry 44 }
|
|
|
|
rcPlugOptModAux1HighWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
Aux1 warning threshold."
|
|
::= { rcPlugOptModEntry 45 }
|
|
|
|
rcPlugOptModAux1LowWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
Aux1 warning threshold."
|
|
::= { rcPlugOptModEntry 46 }
|
|
|
|
rcPlugOptModAux2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This represents the internally measured A/D
|
|
value specified."
|
|
::= { rcPlugOptModEntry 47 }
|
|
|
|
rcPlugOptModAux2HighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
Aux1 threshold."
|
|
::= { rcPlugOptModEntry 48 }
|
|
|
|
rcPlugOptModAux2LowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
Aux1 threshold."
|
|
::= { rcPlugOptModEntry 49 }
|
|
|
|
rcPlugOptModAux2HighWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified high
|
|
Aux1 warning threshold."
|
|
::= { rcPlugOptModEntry 50 }
|
|
|
|
rcPlugOptModAux2LowWarningThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the vendor specified low
|
|
Aux1 warning threshold."
|
|
::= { rcPlugOptModEntry 51 }
|
|
|
|
|
|
|
|
-- These next entries represent the defined and warning bits
|
|
-- contained in DDI bytes at offsets 112 thru 117.
|
|
|
|
rcPlugOptModTemperatureStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current temperature status"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 52 }
|
|
|
|
rcPlugOptModVoltageStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current voltage status"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 53 }
|
|
|
|
|
|
rcPlugOptModBiasStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current laser bias status"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 54 }
|
|
|
|
rcPlugOptModTxPowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current transmitter power
|
|
status"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 55 }
|
|
|
|
rcPlugOptModRxPowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current receiver power status"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 56 }
|
|
|
|
rcPlugOptModAux1Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current Aux1 status"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 57 }
|
|
|
|
rcPlugOptModAux2Status OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current Aux2 status"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 58 }
|
|
|
|
rcPlugOptModQSFPTx1Bias OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured transmitter
|
|
laser bias current in channel 1 of QSFP.. It is a positive
|
|
number expressed in units of 0.1 microamp and can range
|
|
from 0 to 131 mA with +/-10% accuracy."
|
|
::= { rcPlugOptModEntry 59 }
|
|
|
|
rcPlugOptModQSFPTx2Bias OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured transmitter
|
|
laser bias current in channel 2 of QSFP.. It is a positive
|
|
number expressed in units of 0.1 microamp and can range
|
|
from 0 to 131 mA with +/-10% accuracy."
|
|
::= { rcPlugOptModEntry 60 }
|
|
|
|
rcPlugOptModQSFPTx3Bias OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured transmitter
|
|
laser bias current in channel 3 of QSFP.. It is a positive
|
|
number expressed in units of 0.1 microamp and can range
|
|
from 0 to 131 mA with +/-10% accuracy."
|
|
::= { rcPlugOptModEntry 61 }
|
|
|
|
rcPlugOptModQSFPTx4Bias OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured transmitter
|
|
laser bias current in channel 4 of QSFP.. It is a positive
|
|
number expressed in units of 0.1 microamps and can range
|
|
from 0 to 131 mA with +/-10% accuracy."
|
|
::= { rcPlugOptModEntry 62 }
|
|
|
|
rcPlugOptModQSFPTx1Power OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured TX output power
|
|
in channel 1 of QSFP. It is a positive number expressed in
|
|
units of micro watts and can range from 0 to 65.535 mW
|
|
(-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 63 }
|
|
|
|
rcPlugOptModQSFPTx2Power OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured TX output power
|
|
in channel 2 of QSFP. It is a positive number expressed in
|
|
units of micro watts and can range from 0 to 65.535 mW
|
|
(-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 64 }
|
|
|
|
rcPlugOptModQSFPTx3Power OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured TX output power
|
|
in channel 3 of QSFP. It is a positive number expressed in
|
|
units of micro watts and can range from 0 to 65.535 mW
|
|
(-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 65 }
|
|
|
|
rcPlugOptModQSFPTx4Power OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured TX output power
|
|
in channel 4 of QSFP. It is a positive number expressed in
|
|
units of micro watts and can range from 0 to 65.535 mW
|
|
(-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 66 }
|
|
|
|
rcPlugOptModQSFPRx1Power OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured received
|
|
power in channel 1 of QSFP. It is a positive number
|
|
expressed in units of micro watts and can range from 0 to
|
|
65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 67 }
|
|
|
|
rcPlugOptModQSFPRx2Power OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured received
|
|
power in channel 2 of QSFP. It is a positive number
|
|
expressed in units of micro watts and can range from 0 to
|
|
65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 68 }
|
|
|
|
rcPlugOptModQSFPRx3Power OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured received
|
|
power in channel 3 of QSFP. It is a positive number
|
|
expressed in units of micro watts and can range from 0 to
|
|
65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 69 }
|
|
|
|
rcPlugOptModQSFPRx4Power OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value represents the internally measured received
|
|
power in channel 1 of QSFP. It is a positive number
|
|
expressed in units of micro watts and can range from 0 to
|
|
65.535 mW (-40 to 18.16 dBm)."
|
|
::= { rcPlugOptModEntry 70 }
|
|
|
|
rcPlugOptModQSFPTx1BiasStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current laser bias status in channel 1
|
|
for QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 71 }
|
|
|
|
rcPlugOptModQSFPTx2BiasStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current laser bias status in channel 2
|
|
for QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 72 }
|
|
|
|
rcPlugOptModQSFPTx3BiasStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current laser bias status in channel 3
|
|
for QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 73 }
|
|
|
|
rcPlugOptModQSFPTx4BiasStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current laser bias status in channel 4
|
|
for QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 74 }
|
|
|
|
rcPlugOptModQSFPTx1PowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current transmitter power
|
|
status in channel 1 of QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 75 }
|
|
|
|
rcPlugOptModQSFPTx2PowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current transmitter power
|
|
status in channel 2 of QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 76 }
|
|
|
|
rcPlugOptModQSFPTx3PowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current transmitter power
|
|
status in channel 3 of QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 77 }
|
|
|
|
rcPlugOptModQSFPTx4PowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current transmitter power
|
|
status in channel 4 of QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 78 }
|
|
|
|
rcPlugOptModQSFPRx1PowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current receiver power status in channel 1
|
|
for QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 79 }
|
|
|
|
rcPlugOptModQSFPRx2PowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current receiver power status in channel 2
|
|
for QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 80 }
|
|
|
|
rcPlugOptModQSFPRx3PowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current receiver power status in channel 3
|
|
for QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 81 }
|
|
|
|
rcPlugOptModQSFPRx4PowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
highWarning(2),
|
|
highAlarm(3),
|
|
lowWarning(4),
|
|
lowAlarm(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the current receiver power status in channel 4
|
|
for QSFP"
|
|
DEFVAL { normal }
|
|
::= { rcPlugOptModEntry 82 }
|
|
|
|
|
|
-- ----------------------------------------------------------
|
|
--Global configuration of DDI
|
|
-- ----------------------------------------------------------
|
|
|
|
rcPlugOptModScalars OBJECT IDENTIFIER ::= { rcPlugOptMod 2 }
|
|
|
|
rcPlugOptModDdmMonitor OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable the global polling monitor for DDM"
|
|
DEFVAL { disable }
|
|
::= { rcPlugOptModScalars 1 }
|
|
|
|
rcPlugOptModDdmMonitorInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (5..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicate the interval in which the DDM alert registers is polled"
|
|
DEFVAL { 5 }
|
|
::= { rcPlugOptModScalars 2 }
|
|
|
|
rcPlugOptModDdmTrapSend OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Enable/disable the global ddm trap send to SNMP manager "
|
|
DEFVAL { enable }
|
|
::= { rcPlugOptModScalars 3 }
|
|
|
|
rcPlugOptModDdmAlarmPortdown OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Enable/disable the global portdown option when ddm alarm occurs "
|
|
DEFVAL { enable }
|
|
::= { rcPlugOptModScalars 4 }
|
|
|
|
|
|
rcPlugOptModOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPlugOptModOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Gbic QSFP table"
|
|
::= { rcPlugOptMod 3 }
|
|
|
|
rcPlugOptModOperEntry OBJECT-TYPE
|
|
SYNTAX RcPlugOptModOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing info. for a particular port"
|
|
INDEX { rcPlugOptModOperPortIndex }
|
|
::= { rcPlugOptModOperTable 1 }
|
|
|
|
RcPlugOptModOperEntry ::= SEQUENCE {
|
|
rcPlugOptModOperPortIndex InterfaceIndex,
|
|
rcPlugOptModOperReset TruthValue
|
|
}
|
|
|
|
rcPlugOptModOperPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port on a
|
|
blade or line-card."
|
|
::= { rcPlugOptModOperEntry 1 }
|
|
|
|
rcPlugOptModOperReset OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This operational object is used to reset the QSFP
|
|
on the port. It always return FALSE"
|
|
DEFVAL {false}
|
|
::= { rcPlugOptModOperEntry 2 }
|
|
|
|
rcPlugNotificationObjects OBJECT IDENTIFIER ::= { rcPlugOptMod 4 }
|
|
|
|
rcPluggableModuleDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Name or description of the Pluggable module. It is used to by the
|
|
notification object rcnPluggableModuleInsertedInNotRecommendedPortTrap
|
|
and rcnPluggableModuleRemovedFromRecommendedPortTrap"
|
|
::= { rcPlugNotificationObjects 1 }
|
|
|
|
-- COBALT BLUE MIBs
|
|
|
|
rcCobaltBlueMib OBJECT IDENTIFIER ::= { rcCobaltBlue 1 }
|
|
|
|
DeviceStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Standard card states for slotted chassis based products"
|
|
SYNTAX INTEGER {
|
|
invalid(1),
|
|
down(2),
|
|
up(3),
|
|
disabled(4)
|
|
}
|
|
|
|
DscpValueSet ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "DSCP Values"
|
|
SYNTAX INTEGER {
|
|
phbcs0(0),
|
|
val1(1),
|
|
val2(2),
|
|
val3(3),
|
|
val4(4),
|
|
val5(5),
|
|
val6(6),
|
|
val7(7),
|
|
phbcs1(8),
|
|
val9(9),
|
|
phbaf11(10),
|
|
val11(11),
|
|
phbaf12(12),
|
|
val13(13),
|
|
phbaf13(14),
|
|
val15(15),
|
|
phbcs2(16),
|
|
val17(17),
|
|
phbaf21(18),
|
|
val19(19),
|
|
phbaf22(20),
|
|
val21(21),
|
|
phbaf23(22),
|
|
val23(23),
|
|
phbcs3(24),
|
|
val25(25),
|
|
phbaf31(26),
|
|
val27(27),
|
|
phbaf32(28),
|
|
val29(29),
|
|
phbaf33(30),
|
|
val31(31),
|
|
phbcs4(32),
|
|
val33(33),
|
|
phbaf41(34),
|
|
val35(35),
|
|
phbaf42(36),
|
|
val37(37),
|
|
phbaf43(38),
|
|
val39(39),
|
|
phbcs5(40),
|
|
val41(41),
|
|
val42(42),
|
|
val43(43),
|
|
val44(44),
|
|
val45(45),
|
|
phbef(46),
|
|
val47(47),
|
|
phbcs6(48),
|
|
val49(49),
|
|
val50(50),
|
|
val51(51),
|
|
val52(52),
|
|
val53(53),
|
|
val54(54),
|
|
val55(55),
|
|
phbcs7(56),
|
|
val57(57),
|
|
val58(58),
|
|
val59(59),
|
|
val60(60),
|
|
val61(61),
|
|
val62(62),
|
|
val63(63),
|
|
disableOrInvalid(64)
|
|
}
|
|
|
|
DropPrecedence ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "QOS Drop Precedence"
|
|
SYNTAX INTEGER {
|
|
low(0),
|
|
medium(1),
|
|
high(2)
|
|
}
|
|
|
|
LaneList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The string is 8 octets long, for a total
|
|
of 64 bits. Each bit corresponds to a lane.
|
|
Each I/O slot can have 4 or 6 lanes based on the
|
|
card type. When a bit has the value one(1),
|
|
the corresponding lane is a member of the set.
|
|
When a bit has the value zero(0), the corresponding
|
|
lane is not a member of the set.
|
|
The encoding is such that the most significant bit
|
|
of octet #1 corresponds to laneId 0, while the
|
|
least significant bit of octet #8 corresponds to
|
|
laneId 63. LaneIds 60, 61, 62, and 63 are not used
|
|
for CB release 1."
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
|
|
QosLevelValueSet ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "QOS Levels"
|
|
SYNTAX INTEGER {
|
|
zero(0),
|
|
one(1),
|
|
two(2),
|
|
three(3),
|
|
four(4),
|
|
five(5),
|
|
six(6),
|
|
seven(7),
|
|
disable(8)
|
|
}
|
|
|
|
Dot1pValueSet ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "802.1p Values"
|
|
SYNTAX INTEGER {
|
|
zero(0),
|
|
one(1),
|
|
two(2),
|
|
three(3),
|
|
four(4),
|
|
five(5),
|
|
six(6),
|
|
seven(7),
|
|
disable(8)
|
|
}
|
|
|
|
MplsExpValueSet ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Mpls Exp Values"
|
|
SYNTAX INTEGER {
|
|
zero(0),
|
|
one(1),
|
|
two(2),
|
|
three(3),
|
|
four(4),
|
|
five(5),
|
|
six(6),
|
|
seven(7),
|
|
disable(8)
|
|
}
|
|
|
|
|
|
SfDeviceMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Mode of given Fast SE Device either BME or SE"
|
|
SYNTAX INTEGER {
|
|
other (1),
|
|
bme(2),
|
|
se(3)
|
|
}
|
|
|
|
--
|
|
-- Object groups within the Cobalt Blue MIB
|
|
--
|
|
|
|
rcCbNotifications OBJECT IDENTIFIER ::= { rcCobaltBlueMib 0 }
|
|
rcCbObjects OBJECT IDENTIFIER ::= { rcCobaltBlueMib 1 }
|
|
|
|
rcCbSwitchFabric OBJECT IDENTIFIER ::= { rcCbObjects 1 }
|
|
|
|
rcCbSwitchFabricScalars OBJECT IDENTIFIER ::= { rcCbSwitchFabric 1 }
|
|
rcCbSwitchFabricStats OBJECT IDENTIFIER ::= { rcCbSwitchFabricScalars 1 }
|
|
|
|
rcCbSwitchFabricDropPrec1AcceptedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Accepted number of packets from drop precedence 1. The drop precedence is a function of the front end policer."
|
|
::= { rcCbSwitchFabricStats 1 }
|
|
|
|
rcCbSwitchFabricDropPrec1AcceptedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Accepted number of bytes from drop precedence 1"
|
|
::= { rcCbSwitchFabricStats 2 }
|
|
|
|
rcCbSwitchFabricDropPrec1CongestionMarkedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Congestion marked number of packets from drop precedence 1."
|
|
::= { rcCbSwitchFabricStats 3 }
|
|
|
|
rcCbSwitchFabricDropPrec1CongestionMarkedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Congestion marked number of bytes from drop precedence 1."
|
|
::= { rcCbSwitchFabricStats 4 }
|
|
|
|
rcCbSwitchFabricDropPrec1DiscardDroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "WRED dropped number of packets from drop precedence 1."
|
|
::= { rcCbSwitchFabricStats 5 }
|
|
|
|
rcCbSwitchFabricDropPrec1DiscardDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "WRED dropped number of bytes from drop precedence 1."
|
|
::= { rcCbSwitchFabricStats 6 }
|
|
|
|
rcCbSwitchFabricDropPrec2AcceptedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Accepted number of packets from drop precedence 2"
|
|
::= { rcCbSwitchFabricStats 7 }
|
|
|
|
rcCbSwitchFabricDropPrec2AcceptedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Accepted number of bytes from drop precedence 2"
|
|
::= { rcCbSwitchFabricStats 8 }
|
|
|
|
rcCbSwitchFabricDropPrec2CongestionMarkedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Congestion marked number of packets from drop precedence 2."
|
|
::= { rcCbSwitchFabricStats 9 }
|
|
|
|
rcCbSwitchFabricDropPrec2CongestionMarkedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Congestion marked number of bytes from drop precedence 2."
|
|
::= { rcCbSwitchFabricStats 10 }
|
|
|
|
rcCbSwitchFabricDropPrec2DiscardDroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "WRED dropped number of packets from drop precedence 2."
|
|
::= { rcCbSwitchFabricStats 11 }
|
|
|
|
rcCbSwitchFabricDropPrec2DiscardDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "WRED dropped number of bytes from drop precedence 2."
|
|
::= { rcCbSwitchFabricStats 12 }
|
|
|
|
rcCbSwitchFabricDropPrec3AcceptedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Accepted number of packets from drop precedence 3"
|
|
::= { rcCbSwitchFabricStats 13 }
|
|
|
|
rcCbSwitchFabricDropPrec3AcceptedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Accepted number of bytes from drop precedence 3"
|
|
::= { rcCbSwitchFabricStats 14 }
|
|
|
|
rcCbSwitchFabricDropPrec3CongestionMarkedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Congestion marked number of packets from drop precedence 3."
|
|
::= { rcCbSwitchFabricStats 15 }
|
|
|
|
rcCbSwitchFabricDropPrec3CongestionMarkedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Congestion marked number of bytes from drop precedence 3."
|
|
::= { rcCbSwitchFabricStats 16 }
|
|
|
|
rcCbSwitchFabricDropPrec3DiscardDroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "WRED dropped number of packets from drop precedence 3."
|
|
::= { rcCbSwitchFabricStats 17 }
|
|
|
|
rcCbSwitchFabricDropPrec3DiscardDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "WRED dropped number of bytes from drop precedence 3."
|
|
::= { rcCbSwitchFabricStats 18 }
|
|
|
|
rcCbSwitchFabricDropPrec4AcceptedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Accepted number of packets from drop precedence 4"
|
|
::= { rcCbSwitchFabricStats 19 }
|
|
|
|
rcCbSwitchFabricDropPrec4AcceptedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Accepted number of bytes from drop precedence 4"
|
|
::= { rcCbSwitchFabricStats 20 }
|
|
|
|
rcCbSwitchFabricNonWredDroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dropped packets due to non Random Early Detection"
|
|
::= { rcCbSwitchFabricStats 21 }
|
|
|
|
rcCbSwitchFabricNonWredDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dropped packets bytes due to non Random Early Detection"
|
|
::= { rcCbSwitchFabricStats 22 }
|
|
|
|
rcCbSwitchFabricDequeuedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Packets dequeued once inside the switch fabric"
|
|
::= { rcCbSwitchFabricStats 23 }
|
|
|
|
rcCbSwitchFabricDequeuedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Packets bytes dequeued once inside the switch fabric"
|
|
::= { rcCbSwitchFabricStats 24 }
|
|
|
|
rcCbSwitchFabricDropPrec1DroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "non-WRED dropped number of packets from drop precedence 1."
|
|
::= { rcCbSwitchFabricStats 25 }
|
|
|
|
rcCbSwitchFabricDropPrec1DroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "non-WRED dropped number of bytes from drop precedence 1."
|
|
::= { rcCbSwitchFabricStats 26 }
|
|
|
|
rcCbSwitchFabricDropPrec2DroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "non-WRED dropped number of packets from drop precedence 2."
|
|
::= { rcCbSwitchFabricStats 27 }
|
|
|
|
rcCbSwitchFabricDropPrec2DroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "non-WRED dropped number of bytes from drop precedence 2."
|
|
::= { rcCbSwitchFabricStats 28 }
|
|
|
|
rcCbSwitchFabricDropPrec3DroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "non-WRED dropped number of packets from drop precedence 3."
|
|
::= { rcCbSwitchFabricStats 29 }
|
|
|
|
rcCbSwitchFabricDropPrec3DroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "non-WRED dropped number of bytes from drop precedence 3."
|
|
::= { rcCbSwitchFabricStats 30 }
|
|
|
|
rcCbSwitchFabricDropPrec4CongestionMarkedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Congestion marked number of packets from drop precedence 4."
|
|
::= { rcCbSwitchFabricStats 31 }
|
|
|
|
rcCbSwitchFabricDropPrec4CongestionMarkedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Congestion marked number of bytes from drop precedence 4."
|
|
::= { rcCbSwitchFabricStats 32 }
|
|
|
|
rcCbSwitchFabricDropPrec4DiscardDroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "WRED dropped number of packets from drop precedence 4."
|
|
::= { rcCbSwitchFabricStats 33 }
|
|
|
|
rcCbSwitchFabricDropPrec4DiscardDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "WRED dropped number of bytes from drop precedence 4."
|
|
::= { rcCbSwitchFabricStats 34 }
|
|
|
|
rcCbSwitchFabricDropPrec4DroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "non-WRED dropped number of packets from drop precedence 4."
|
|
::= { rcCbSwitchFabricStats 35 }
|
|
|
|
rcCbSwitchFabricDropPrec4DroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "non-WRED dropped number of bytes from drop precedence 4."
|
|
::= { rcCbSwitchFabricStats 36 }
|
|
|
|
rcCbSwitchFabricOverSubscribeTotalDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dropped number of packets due to free list underflow."
|
|
::= { rcCbSwitchFabricStats 37 }
|
|
|
|
rcCbSwitchFabricOverSubscribeTotalDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dropped number of bytes due to free list underflow."
|
|
::= { rcCbSwitchFabricStats 38 }
|
|
|
|
rcCbSwitchFabricOverSubscribeGuaranteeDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dropped number of packets Gbl buf thres guarantee."
|
|
::= { rcCbSwitchFabricStats 39 }
|
|
|
|
rcCbSwitchFabricOverSubscribeGuaranteeDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dropped number of bytes Gbl buf thres guarantee."
|
|
::= { rcCbSwitchFabricStats 40 }
|
|
|
|
rcCbSwitchFabricOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of packets out from egress interface."
|
|
::= { rcCbSwitchFabricStats 41 }
|
|
|
|
rcCbSwitchFabricOutBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of bytes out from egress interface."
|
|
::= { rcCbSwitchFabricStats 42 }
|
|
|
|
rcCbSwitchFabricStatsCapture OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Control to turn stats collection on or off"
|
|
::= { rcCbSwitchFabricScalars 2 }
|
|
|
|
rcCbSwitchFabricStatsPortId OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The port on which stats is to be collected on.
|
|
Must select a data port."
|
|
::= { rcCbSwitchFabricScalars 3}
|
|
|
|
rcCbSwitchFabricStatsCosId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The CoS or VOQ to collect Stats on"
|
|
::= { rcCbSwitchFabricScalars 4}
|
|
|
|
rcCbBmeActiveBme OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
activeArbitorId0(1), -- slot 24
|
|
activeArbitorId1(2) -- slot 21
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The location of the active BME in the system.
|
|
BME stands for Bandwidth Manager Engine."
|
|
::= { rcCbSwitchFabricScalars 5}
|
|
|
|
rcCbBmeRedundancyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual(1),
|
|
onePlusOneControlAndData(2),
|
|
onePlusOneControlOnly(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Redundancy mode for BMEs."
|
|
::= { rcCbSwitchFabricScalars 6}
|
|
|
|
rcCbProfileType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
balanced(1),
|
|
unicastOptimized(2),
|
|
multicastOptimized(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Switch fabric profile type."
|
|
DEFVAL { balanced }
|
|
::= { rcCbSwitchFabricScalars 7}
|
|
|
|
rcCbSwitchFabricDeviceRead OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If turned on statistics for switch fabric counters
|
|
are collected directly from devices. Otherwise,
|
|
a cached copy is returned."
|
|
DEFVAL { true }
|
|
::= { rcCbSwitchFabricScalars 8}
|
|
|
|
rcCbQueuingEngine2kTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCBQueuingEngine2kEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the 2k based queuing engine
|
|
entries for the system."
|
|
::= { rcCbSwitchFabric 2 }
|
|
|
|
rcCbQueuingEngine2kEntry OBJECT-TYPE
|
|
SYNTAX RcCBQueuingEngine2kEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for the QE Table"
|
|
INDEX { rcCbQueuingEngine2kId }
|
|
::= { rcCbQueuingEngine2kTable 1 }
|
|
|
|
RcCBQueuingEngine2kEntry ::= SEQUENCE {
|
|
rcCbQueuingEngine2kId Integer32,
|
|
rcCbQueuingEngine2kStatus DeviceStatus
|
|
}
|
|
|
|
rcCbQueuingEngine2kId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for an entry in the QE Table. Here is the layout
|
|
of the IDs in relation to the system:
|
|
|
|
Location ID(s)
|
|
---------------------
|
|
IO on slot 3: 1..3
|
|
IO on slot 4: 4..6
|
|
CP on slot 1: 7
|
|
CP on slot 2: 8
|
|
IO on slot 5: 9..11
|
|
IO on slot 6: 12..14
|
|
...
|
|
IO on slot 12: 30..32
|
|
"
|
|
::= { rcCbQueuingEngine2kEntry 1 }
|
|
|
|
rcCbQueuingEngine2kStatus OBJECT-TYPE
|
|
SYNTAX DeviceStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Status of a given QE interface."
|
|
::= { rcCbQueuingEngine2kEntry 2 }
|
|
|
|
rcCbSwitchingEngine4kTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCBSwitchingEngine4kEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the 4k based switching
|
|
engine entries for the system."
|
|
::= { rcCbSwitchFabric 3 }
|
|
|
|
rcCbSwitchingEngine4kEntry OBJECT-TYPE
|
|
SYNTAX RcCBSwitchingEngine4kEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for the SE Table."
|
|
INDEX { rcCbSwitchingEngine4kId }
|
|
::= { rcCbSwitchingEngine4kTable 1 }
|
|
|
|
RcCBSwitchingEngine4kEntry ::= SEQUENCE {
|
|
rcCbSwitchingEngine4kId Integer32,
|
|
rcCbSwitchingEngine4kStatus DeviceStatus
|
|
}
|
|
|
|
rcCbSwitchingEngine4kId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..18)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for the SE Table. Here is the layout
|
|
of the IDs in relation to the system:
|
|
|
|
Location ID(s)
|
|
---------------------
|
|
SF on slot 13: 1..3
|
|
SF on slot 14: 4..6
|
|
...
|
|
SF on slot 18: 16..18
|
|
"
|
|
::= { rcCbSwitchingEngine4kEntry 1 }
|
|
|
|
rcCbSwitchingEngine4kStatus OBJECT-TYPE
|
|
SYNTAX DeviceStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Status of a given SE Device."
|
|
::= { rcCbSwitchingEngine4kEntry 2 }
|
|
|
|
rcCbSwitchingEngine9600Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCBSwitchingEngine9600Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the 9600 based switching
|
|
engine entries for the system."
|
|
::= { rcCbSwitchFabric 4 }
|
|
|
|
rcCbSwitchingEngine9600Entry OBJECT-TYPE
|
|
SYNTAX RcCBSwitchingEngine9600Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for the SE 9600 Table."
|
|
INDEX { rcCbSwitchingEngine9600Id }
|
|
::= { rcCbSwitchingEngine9600Table 1 }
|
|
|
|
RcCBSwitchingEngine9600Entry ::= SEQUENCE {
|
|
rcCbSwitchingEngine9600Id Integer32,
|
|
rcCbSwitchingEngine9600Status DeviceStatus,
|
|
rcCbSwitchingEngine9600Mode SfDeviceMode
|
|
}
|
|
|
|
rcCbSwitchingEngine9600Id OBJECT-TYPE
|
|
SYNTAX Integer32 (1..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for the SE Table. Here is the layout
|
|
of the IDs in relation to the system:
|
|
|
|
Location ID(s)
|
|
---------------------
|
|
SF on slot 21: 1..2
|
|
SF on slot 22: 3..4
|
|
...
|
|
SF on slot 26: 11..12
|
|
"
|
|
::= { rcCbSwitchingEngine9600Entry 1 }
|
|
|
|
rcCbSwitchingEngine9600Status OBJECT-TYPE
|
|
SYNTAX DeviceStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Status of a given Fast SE Device."
|
|
::= { rcCbSwitchingEngine9600Entry 2 }
|
|
|
|
rcCbSwitchingEngine9600Mode OBJECT-TYPE
|
|
SYNTAX SfDeviceMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mode of given Fast SE Device either BME or SE."
|
|
::= { rcCbSwitchingEngine9600Entry 3 }
|
|
|
|
rcCbQe2kSerdesLinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCbQe2kSerdesLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the Serdes Link Information
|
|
for the system."
|
|
::= { rcCbSwitchFabric 5 }
|
|
|
|
rcCbQe2kSerdesLinkEntry OBJECT-TYPE
|
|
SYNTAX RcCbQe2kSerdesLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for a QE based Serdes Link Interface.
|
|
The combination of the QE ID and Serdes Link ID
|
|
uniquely identifies a link."
|
|
INDEX { rcCbQe2kSerdesLinkId}
|
|
::= { rcCbQe2kSerdesLinkTable 1 }
|
|
|
|
RcCbQe2kSerdesLinkEntry ::= SEQUENCE {
|
|
rcCbQe2kSerdesLinkId Integer32,
|
|
rcCbQe2kSerdesLinkType INTEGER,
|
|
rcCbQe2kSerdesLinkStatus DeviceStatus,
|
|
rcCbQe2kSerdesLinkConnectedToDevice Integer32,
|
|
rcCbQe2kSerdesLinkConnectedToSlot Integer32
|
|
}
|
|
|
|
rcCbQe2kSerdesLinkId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..640)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This ID maps to a particular serdes port number
|
|
for the identified device. Here's the mapping:
|
|
|
|
rcCbQe2kSerdesLinkId 1 = port 0; Slot 3; QE Device 1
|
|
...
|
|
rcCbQe2kSerdesLinkId 20 = port 19; Slot 3; QE Device 1
|
|
rcCbQe2kSerdesLinkId 21 = port 0; Slot 3; QE Device 2
|
|
rcCbQe2kSerdesLinkId 41 = port 0; Slot 3; QE Device 3
|
|
rcCbQe2kSerdesLinkId 61 = port 0; Slot 4; QE Device 1
|
|
rcCbQe2kSerdesLinkId 121 = port 0; Slot 1; QE Device 1
|
|
rcCbQe2kSerdesLinkId 141 = port 0; Slot 1; QE Device 1
|
|
rcCbQe2kSerdesLinkId 161 = port 0; Slot 5; QE Device 1
|
|
rcCbQe2kSerdesLinkId 221 = port 0; Slot 6; QE Device 1
|
|
... with slots 6-12 in order ...
|
|
rcCbQe2kSerdesLinkId 640 = port 19; Slot 12; QE Device 3
|
|
Note link 15 & 17 are used when QE2k is connected to SF96."
|
|
::= { rcCbQe2kSerdesLinkEntry 1 }
|
|
|
|
rcCbQe2kSerdesLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sci(1),
|
|
sfi(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Link type of the serdes interface"
|
|
::= { rcCbQe2kSerdesLinkEntry 2 }
|
|
|
|
rcCbQe2kSerdesLinkStatus OBJECT-TYPE
|
|
SYNTAX DeviceStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Interface Status"
|
|
::= { rcCbQe2kSerdesLinkEntry 3 }
|
|
|
|
rcCbQe2kSerdesLinkConnectedToDevice OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The SE/BME ID to which the QE2k ID is attached
|
|
to. Note that IDs 16 & 18 are unused."
|
|
::= { rcCbQe2kSerdesLinkEntry 4 }
|
|
|
|
rcCbQe2kSerdesLinkConnectedToSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (21..26)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slot number of the switch fabric card to which the QE2k ID is attached to."
|
|
::= { rcCbQe2kSerdesLinkEntry 5 }
|
|
|
|
rcCbSESerdesLinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCBSESerdesLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the Serdes Link Information
|
|
for the system."
|
|
::= { rcCbSwitchFabric 6 }
|
|
|
|
rcCbSESerdesLinkEntry OBJECT-TYPE
|
|
SYNTAX RcCBSESerdesLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for an SE based Serdes Link Interface.
|
|
The combination of the QE ID and Serdes Link ID
|
|
uniquely identifies a link."
|
|
INDEX { rcCbSESerdesLinkId}
|
|
::= { rcCbSESerdesLinkTable 1 }
|
|
|
|
RcCBSESerdesLinkEntry ::= SEQUENCE {
|
|
rcCbSESerdesLinkId Integer32,
|
|
rcCbSESerdesLinkType INTEGER,
|
|
rcCbSESerdesLinkStatus DeviceStatus,
|
|
rcCbSESerdesLinkConnectedToDevice Integer32,
|
|
rcCbSESerdesLinkConnectedToSlot Integer32
|
|
}
|
|
|
|
rcCbSESerdesLinkId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..640)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This ID maps to a particular serdes port number
|
|
for the identified device. Here's the mapping:
|
|
|
|
SESerdesLinkId 1 = port 0; Slot 21; Device 1
|
|
SESerdesLinkId 33 = port 0; Slot 21; Device 2
|
|
SESerdesLinkId 65 = port 0; Slot 21; Device 3
|
|
SESerdesLinkId 97 = port 0; Slot 22; Device 1
|
|
...
|
|
SESerdesLinkId 640 = port 31; Slot 26; Device 3"
|
|
::= { rcCbSESerdesLinkEntry 1 }
|
|
|
|
rcCbSESerdesLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sci(1),
|
|
sfi(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Link Type of the Serdes interface. Switch control
|
|
interface is sci. Switch forwarding interface is sfi."
|
|
::= { rcCbSESerdesLinkEntry 2 }
|
|
|
|
rcCbSESerdesLinkStatus OBJECT-TYPE
|
|
SYNTAX DeviceStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Interface Status"
|
|
::= { rcCbSESerdesLinkEntry 3 }
|
|
|
|
rcCbSESerdesLinkConnectedToDevice OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The QE2k ID to which the SE/BME ID is attached to."
|
|
::= { rcCbSESerdesLinkEntry 4 }
|
|
|
|
rcCbSESerdesLinkConnectedToSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slot number of the switch fabric card to which the QE2k ID is attached to."
|
|
::= { rcCbSESerdesLinkEntry 5 }
|
|
|
|
rcCbSE9600SerdesLinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCBSE9600SerdesLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing the Fast Serdes Link Information
|
|
for the system."
|
|
::= { rcCbSwitchFabric 7 }
|
|
|
|
rcCbSE9600SerdesLinkEntry OBJECT-TYPE
|
|
SYNTAX RcCBSE9600SerdesLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for an SE based Serdes Link Interface.
|
|
The combination of the QE ID and Serdes Link ID
|
|
uniquely identifies a link."
|
|
INDEX { rcCbSE9600SerdesLinkId}
|
|
::= { rcCbSE9600SerdesLinkTable 1 }
|
|
|
|
RcCBSE9600SerdesLinkEntry ::= SEQUENCE {
|
|
rcCbSE9600SerdesLinkId Integer32,
|
|
rcCbSE9600SerdesLinkType INTEGER,
|
|
rcCbSE9600SerdesLinkStatus DeviceStatus,
|
|
rcCbSE9600SerdesLinkConnectedToDevice Integer32,
|
|
rcCbSE9600SerdesLinkConnectedToSlot Integer32
|
|
}
|
|
|
|
rcCbSE9600SerdesLinkId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1152)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This ID maps to a particular serdes port number
|
|
for the identified device. Here's the mapping:
|
|
|
|
SESerdesLinkId 1 = port 0; Slot 21; Device 1
|
|
SESerdesLinkId 97 = port 0; Slot 21; Device 2
|
|
SESerdesLinkId 193 = port 0; Slot 22; Device 1
|
|
SESerdesLinkId 289 = port 0; Slot 22; Device 2
|
|
...
|
|
SESerdesLinkId 1152 = port 96; Slot 26; Device 2"
|
|
::= { rcCbSE9600SerdesLinkEntry 1 }
|
|
|
|
rcCbSE9600SerdesLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sci(1),
|
|
sfi(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Link Type of the Serdes interface. Switch control
|
|
interface is sci. Switch forwarding interface is sfi."
|
|
::= { rcCbSE9600SerdesLinkEntry 2 }
|
|
|
|
rcCbSE9600SerdesLinkStatus OBJECT-TYPE
|
|
SYNTAX DeviceStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Interface Status"
|
|
::= { rcCbSE9600SerdesLinkEntry 3 }
|
|
|
|
rcCbSE9600SerdesLinkConnectedToDevice OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The QE2k ID to which the SE/BME ID is attached to."
|
|
::= { rcCbSE9600SerdesLinkEntry 4 }
|
|
|
|
rcCbSE9600SerdesLinkConnectedToSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (1..12)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The slot number of the switch fabric card to which the QE2k ID is attached to."
|
|
::= { rcCbSE9600SerdesLinkEntry 5 }
|
|
|
|
rcCbSPITable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCBSPIEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Table containing the system peripheral interface info."
|
|
::= { rcCbSwitchFabric 8 }
|
|
|
|
rcCbSPIEntry OBJECT-TYPE
|
|
SYNTAX RcCBSPIEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "SPI table entry"
|
|
INDEX { rcCbSPIId }
|
|
::= { rcCbSPITable 1 }
|
|
|
|
RcCBSPIEntry ::= SEQUENCE {
|
|
rcCbSPIId Integer32,
|
|
rcCbSPIStatus DeviceStatus
|
|
}
|
|
|
|
rcCbSPIId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..72)
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "The Index for the SPI Table. Here is the layout
|
|
of the IDs in relation to the system:
|
|
|
|
Location ID(s)
|
|
---------------------
|
|
Slot 1: 1..6
|
|
Slot 2: 7..12
|
|
...
|
|
Slot 12: 57..72
|
|
|
|
Current implementation uses the first 6 IDs for each slot.
|
|
"
|
|
::= { rcCbSPIEntry 1 }
|
|
|
|
rcCbSPIStatus OBJECT-TYPE
|
|
SYNTAX DeviceStatus
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "SPI Status"
|
|
::= { rcCbSPIEntry 2 }
|
|
|
|
-- Notification
|
|
|
|
rcLoginUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Used to inidcation the login user name for notification"
|
|
::= { rcCbNotifications 1 }
|
|
|
|
rcSlotType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
slot1(1),
|
|
slot2(2),
|
|
slot3(3),
|
|
slot4(4),
|
|
slot5(5),
|
|
slot6(6),
|
|
slot7(7),
|
|
slot8(8),
|
|
slot9(9),
|
|
slot10(10),
|
|
slot11(11),
|
|
slot12(12),
|
|
ps1(13),
|
|
ps2(14),
|
|
ps3(15),
|
|
ps4(16),
|
|
ps5(17),
|
|
ps6(18),
|
|
mid1(19),
|
|
mid2(20),
|
|
sf1(21),
|
|
sf2(22),
|
|
sf3(23),
|
|
sf4(24),
|
|
sf5(25),
|
|
sf6(26),
|
|
aux1(27),
|
|
aux2(28),
|
|
iofan1(29),
|
|
iofan2(30),
|
|
sffan1(31),
|
|
sffan2(32)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Used to inidcate the slot type"
|
|
::= { rcCbNotifications 3 }
|
|
|
|
rcFanZoneType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
front(1),
|
|
rear(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Type of the fan zone."
|
|
::= { rcCbNotifications 4 }
|
|
|
|
rcFanTrayId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Fan tray number in the fan zone"
|
|
::= { rcCbNotifications 5 }
|
|
|
|
rcFanUnitId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Fan unit number in the fan tray"
|
|
::= { rcCbNotifications 6 }
|
|
|
|
rcCardTemp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Used to inidcate the card temperature"
|
|
::= { rcCbNotifications 7 }
|
|
|
|
rcCpuUtilization OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Used to inidcate the CPU utilization"
|
|
::= { rcCbNotifications 8 }
|
|
|
|
rcLoginHostAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Used to inidcation the login host address type for
|
|
notification"
|
|
::= {rcCbNotifications 9 }
|
|
|
|
rcLoginHostInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Used to inidcation the login host inet address for
|
|
notification"
|
|
::= {rcCbNotifications 10 }
|
|
|
|
rcSlotPowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notAvailable(1),
|
|
available(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Whethere power is available to boot up the card in
|
|
the slot."
|
|
::= { rcCbNotifications 11 }
|
|
|
|
rcLoginHostIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Used to inidcation the login host ip address for
|
|
notification"
|
|
::= {rcCbNotifications 2 }
|
|
|
|
rc2kCardShutDownReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highSpeedFanNeeded(1)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "The reason can not boot up the card in the slot."
|
|
::= { rcCbNotifications 12 }
|
|
|
|
rc2kCardZoneTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the card zone temperature"
|
|
::= { rcCbNotifications 13 }
|
|
|
|
rc2kCardTemperatureZoneInfo OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inletOutletZone(1),
|
|
fpgaZone(2),
|
|
faZone(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "rc2kCardTemperatureZoneInfo indicates the zone for which the
|
|
card temperature trap (rcn2kCardZoneOverheat, rcn2kCardZoneNormalTemp
|
|
and rcn2kCardOverheatShutDown) is raised."
|
|
::= { rcCbNotifications 14 }
|
|
|
|
-- Khi Mibs
|
|
-- rcKhi MIB: Key Health Indication MIB
|
|
|
|
rcKhiConfig OBJECT IDENTIFIER ::= { rcKhi 1 }
|
|
|
|
rcKhiConfigKhiAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key Health Inidaction, this object is used turn off the KHI
|
|
feature administratively. true(1) means On, false(2) means
|
|
off. By default, it is always set to true(1)."
|
|
DEFVAL { true }
|
|
::= { rcKhiConfig 1 }
|
|
|
|
rcKhiConfigKhiBootDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..60)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Time interval from system up and running to
|
|
start the KHI feature. Set to 0 to disable
|
|
to the time interval."
|
|
DEFVAL { 5 }
|
|
::= { rcKhiConfig 2 }
|
|
|
|
rcKhiConfigClearAction OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
chassis(0),
|
|
performance(1),
|
|
port(2),
|
|
forwarding(3),
|
|
ip(4),
|
|
protocol(5),
|
|
mgmt(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear action with bits set. 0 Bit means from left
|
|
(most sinificant) bit to right (less sinificnt) bit"
|
|
::= { rcKhiConfig 3 }
|
|
|
|
rcKhiConfigPortKhiAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key Health Inidcation, this object is used
|
|
turn off the Port KHI feature administratively.
|
|
true(1) means On, false(2) means off. By
|
|
default, it is always set to true(1)."
|
|
DEFVAL { true }
|
|
::= { rcKhiConfig 4 }
|
|
|
|
rcKhiConfigPerfKhiAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key Health Inidcation, this object is used
|
|
turn off the Performance KHI feature administratively.
|
|
true(1) means On, false(2) means off. By
|
|
default, it is always set to true(1)."
|
|
DEFVAL { true }
|
|
::= { rcKhiConfig 5 }
|
|
|
|
rcKhiConfigChasKhiAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key Health Inidcation, this object is used
|
|
turn off the Chassis KHI feature administratively.
|
|
true(1) means On, false(2) means off. By
|
|
default, it is always set to true(1)."
|
|
DEFVAL { true }
|
|
::= { rcKhiConfig 6 }
|
|
|
|
rcKhiConfigForwardingKhiAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key Health Inidcation, this object is used
|
|
turn off the Forwarding KHI feature
|
|
administratively. true(1) means On, false(2)
|
|
means off. By default, it is always set to
|
|
true(1)."
|
|
DEFVAL { true }
|
|
::= { rcKhiConfig 7 }
|
|
|
|
rcKhiConfigMgmtKhiAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key Health Inidcation, this object is used
|
|
turn off the Management KHI feature
|
|
administratively. true(1) means On, false(2)
|
|
means off. By default, it is always set to
|
|
true(1)."
|
|
DEFVAL { true }
|
|
::= { rcKhiConfig 8 }
|
|
|
|
rcKhiConfigForwardingClearSlot OBJECT-TYPE
|
|
SYNTAX INTEGER (3..12)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear KHI Forwarding stats for a particular Slot"
|
|
::= { rcKhiConfig 9}
|
|
|
|
rcKhiConfigMonitoringKhiAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key Health Inidcation, this object is used
|
|
turn off the Monitoring KHI feature
|
|
administratively. true(1) means On, false(2)
|
|
means off. By default, it is always set to
|
|
false(2)."
|
|
DEFVAL { false }
|
|
::= { rcKhiConfig 10 }
|
|
|
|
rcKhiHighLevel OBJECT IDENTIFIER ::= { rcKhi 2 }
|
|
|
|
rcKhiHighLevelKhiOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
running(1),
|
|
off(2),
|
|
wait(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate if the KHI feature is on(1), off(2) or wait(3).
|
|
running (1) means KHI is enabled and running.
|
|
off(2) means KHI is disabled
|
|
wait(3) means KHI is enabled but it is not running yet. At
|
|
beginning of system boot up, KHI can be set to wait for
|
|
start time (rcKhiHighLevelKhiStartTime) to experied then
|
|
start the KHI monitor the system. This allows the system
|
|
fully up and start the KHI info.
|
|
When Operation Status is off or wait, all KHI status will
|
|
not be valid"
|
|
::= { rcKhiHighLevel 1 }
|
|
|
|
rcKhiHighLevelChassisCurrentStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Chassis current status. Include:
|
|
Chassis Temperature, Fan Temperature and operational status,
|
|
Line card operational status, Mezz operational status, HA status.
|
|
This object show GREEN when all of above are GREEN. Otherwise, it
|
|
will show the highest alert in ther order of Red, Yellow, or Green
|
|
green(1): All Chassis parameters are normal.
|
|
yellow(2): One of chassis parameter in alert state
|
|
red(3): One or more Chassis parameters are in critical state."
|
|
::= { rcKhiHighLevel 2 }
|
|
|
|
rcKhiHighLevelChassisFirstHighestEvent OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The first highest alert changing of chassis status since
|
|
last boot or last clear (rcKhiConfigClearAction).
|
|
green(1): All Chassis parameters were normal.
|
|
yellow(2): One or more Chassis parameter has changed.
|
|
red(3): One or more Chassis parameters were in critical state."
|
|
::= { rcKhiHighLevel 3 }
|
|
|
|
rcKhiHighLevelChassisFirstHighestEventTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of first highest alert of chassis status
|
|
indication (rcKhiHighLevelChassisChangeStatus)"
|
|
::= { rcKhiHighLevel 4 }
|
|
|
|
rcKhiHighLevelChassisRefStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Chassis reference status before the first the first change
|
|
and since last boot or last clear (rcKhiConfigClearAction).
|
|
green(1): All Chassis parameters were normal.
|
|
yellow(2): One or more Chassis parameter has changed.
|
|
red(3): One or more Chassis parameters were in critical state."
|
|
::= { rcKhiHighLevel 5 }
|
|
|
|
rcKhiHighLevelChassisStatusLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "chassis status last clear time stamp"
|
|
::= { rcKhiHighLevel 6 }
|
|
|
|
rcKhiHighLevelCpuPerfCurrentStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current CPU Performance Status. Inlcudes: CPU utilization,
|
|
Fabric utilization, Buffer utilization, Dram Size, Suspended
|
|
task, CPU control status.
|
|
green(1): All chassis parameter are normal
|
|
yellow(2): One or more Chassis parameters have changed.
|
|
red(3): One or more Chassis parameters are in critical state."
|
|
::= { rcKhiHighLevel 7 }
|
|
|
|
rcKhiHighLevelCpuPerfFirstHighestEvent OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The first highest alert change of CPU performance status
|
|
since last boot or last clear (rcKhiConfigClearAction).
|
|
green(1): All Chassis parameters were normal.
|
|
yellow(2): One or more Chassis parameter has changed.
|
|
red(3): One or more Chassis parameters are in critical state."
|
|
::= { rcKhiHighLevel 8 }
|
|
|
|
rcKhiHighLevelCpuPerfFirstHighestEventTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of first highest alert change of CPU Performance status
|
|
(rcKhiHighLevelCpuPerfChangeStatus)"
|
|
::= { rcKhiHighLevel 9 }
|
|
|
|
rcKhiHighLevelCpuPerfRefStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CPU performance reference status before the first change
|
|
since last boot or last clear (rcKhiConfigClearAction).
|
|
green(1): All Chassis parameters were normal.
|
|
yellow(2): One or more Chassis parameter has changed.
|
|
red(3): One or more Chassis parameters are in critical state."
|
|
::= { rcKhiHighLevel 10 }
|
|
|
|
rcKhiHighLevelCpuPerfStatusLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CPU Performance last clear time stamp"
|
|
::= { rcKhiHighLevel 11 }
|
|
|
|
rcKhiHighLevelPortCurrentStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ports current status.
|
|
green(1): Port link state has no change.
|
|
yellow(2): Port link state is changed by admin.
|
|
red(3): Port link state is in critical state."
|
|
::= { rcKhiHighLevel 12 }
|
|
|
|
rcKhiHighLevelPortFirstHighestEvent OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The first highest change indication of ports status since
|
|
last boot or last clear (rcKhiConfigClearAction).
|
|
green(1): Port link state had no change.
|
|
yellow(2): Port link state was changed by admin.
|
|
red(3): Port link state was in critical state."
|
|
::= { rcKhiHighLevel 13 }
|
|
|
|
rcKhiHighLevelPortFirstHighestEventTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of first highest inidcation of Ports status
|
|
status indication (rcKhiHighLevelPortChangeStatus)"
|
|
::= { rcKhiHighLevel 14 }
|
|
|
|
rcKhiHighLevelPortRefStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ports reference status before first change since
|
|
last boot or last clear (rcKhiConfigClearAction).
|
|
green(1): Port link state had no change.
|
|
yellow(2): Port link state was changed by admin.
|
|
red(3): Port link state was in critical state."
|
|
::= { rcKhiHighLevel 15 }
|
|
|
|
rcKhiHighLevelPortStatusLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ports status last clear time stamp"
|
|
::= { rcKhiHighLevel 16 }
|
|
|
|
rcKhiHighLevelForwardingCurrentStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Forwarding current status.
|
|
green(1): Port link state has no change.
|
|
yellow(2): Port link state is changed by admin.
|
|
red(3): Port link state is in critical state."
|
|
::= { rcKhiHighLevel 17 }
|
|
|
|
rcKhiHighLevelForwardingFirstHighestEvent OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The frist highest changing inidcation of Forwarding status
|
|
since last boot or clear.
|
|
green(1): Port link state had no change.
|
|
yellow(2): Port link state was changed by admin.
|
|
red(3): Port link state was in critical state."
|
|
::= { rcKhiHighLevel 18 }
|
|
|
|
rcKhiHighLevelForwardingFirstHighestEventTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of first highest inidcation of Forwarding status
|
|
status indication (rcKhiHighLevelForwardingChangeStatus)"
|
|
::= { rcKhiHighLevel 19 }
|
|
|
|
rcKhiHighLevelForwardingRefStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Forwarding reference status before the first change
|
|
since last boot or clear.
|
|
green(1): Port link state had no change.
|
|
yellow(2): Port link state was changed by admin.
|
|
red(3): Port link state was in critical state."
|
|
::= { rcKhiHighLevel 20 }
|
|
|
|
rcKhiHighLevelForwardingStatusLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Forwarding status last clear time stamp"
|
|
::= { rcKhiHighLevel 21 }
|
|
|
|
rcKhiHighLevelTotalConfigVlanCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Number of Vlan configured in device"
|
|
::= { rcKhiHighLevel 22 }
|
|
|
|
rcKhiHighLevelTotalConfigIpIfCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total Configured IP Interface count"
|
|
::= { rcKhiHighLevel 23 }
|
|
|
|
rcKhiHighLevelTotalOperIpIfCurrentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current total operational IP Interface count"
|
|
::= { rcKhiHighLevel 24 }
|
|
|
|
rcKhiHighLevelIpIfFirstChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of first change of IP interface"
|
|
::= { rcKhiHighLevel 25 }
|
|
|
|
rcKhiHighLevelTotalOperIpIfReferenceCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Reference count of total operational IP berfore the
|
|
first change since last boot or last clear"
|
|
::= { rcKhiHighLevel 26 }
|
|
|
|
rcKhiHighLevelIpIfLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP interface last clear time stamp"
|
|
::= { rcKhiHighLevel 27 }
|
|
|
|
rcKhiHighLevelGlobalRouterTotalRouteCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of route count in VRF 0,
|
|
which is default VRF"
|
|
::= { rcKhiHighLevel 28 }
|
|
|
|
rcKhiHighLevelGlobalRouterTotalRouteRefCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of route reference count in VRF 0,
|
|
which is default VRF"
|
|
::= { rcKhiHighLevel 29 }
|
|
|
|
rcKhiHighLevelGlobalRouterLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global router total routes last clear time stamp"
|
|
::= { rcKhiHighLevel 30 }
|
|
|
|
rcKhiHighLevelGlobalRouterTotalBestRouteCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "total number of best route count
|
|
in VRF 0 (default VRF)"
|
|
::= { rcKhiHighLevel 31 }
|
|
|
|
rcKhiHighLevelGlobalRouterBestRouteRefCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of best route reference count in VRF 0,
|
|
which is default VRF"
|
|
::= { rcKhiHighLevel 32 }
|
|
|
|
rcKhiHighLevelGlobalRouterBestRouteLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global router total best routes last clear time stamp"
|
|
::= { rcKhiHighLevel 33 }
|
|
|
|
rcKhiHighLevelNonZeroVrfsTotalRouteCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of route count in Non Zero
|
|
Vrfs"
|
|
::= { rcKhiHighLevel 34 }
|
|
|
|
rcKhiHighLevelNonZeroVrfsTotalRouteRefCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of route reference count in non zero VRF"
|
|
::= { rcKhiHighLevel 35 }
|
|
|
|
rcKhiHighLevelNonZeroVrfsRouteLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Non zero vrf total routes last clear time stamp"
|
|
::= { rcKhiHighLevel 36 }
|
|
|
|
rcKhiHighLevelNonZeroVrfsTotalBestRouteCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "total number of best route count in Non Zero
|
|
Vrfs"
|
|
::= { rcKhiHighLevel 37 }
|
|
|
|
rcKhiHighLevelNonZeroVrfsBestRouteRefCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of best route reference count in non zero VRF"
|
|
::= { rcKhiHighLevel 38 }
|
|
|
|
rcKhiHighLevelNonZeroVrfsBestRouteLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Non zero vrf total best routes last clear time stamp"
|
|
::= { rcKhiHighLevel 39 }
|
|
|
|
rcKhiHighLevelFdbRecordCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This count includes the number of FDB entries in the CP (Control card) database, it includes the local and remote learnt MACs via IST/SMLT, it is not the actual record count on the line card."
|
|
::= { rcKhiHighLevel 40 }
|
|
|
|
rcKhiHighLevelFdbRecordRefCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of fdb record reference count "
|
|
::= { rcKhiHighLevel 41 }
|
|
|
|
rcKhiHighLevelFdbRecordLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FDB Records Last clear time"
|
|
::= { rcKhiHighLevel 42 }
|
|
|
|
rcKhiHighLevelGlobalRouterProtocolState OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Global Router Protocol State"
|
|
::= { rcKhiHighLevel 43 }
|
|
|
|
rcKhiHighLevelGlobalRouterProtocolStateLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GR Protocol State last clear time"
|
|
::= { rcKhiHighLevel 44 }
|
|
|
|
rcKhiHighLevelNonZeroVrfsProtocolState OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Non zero VRF Protocol State"
|
|
::= { rcKhiHighLevel 45 }
|
|
|
|
rcKhiHighLevelNonZeroVrfsProtocolStateLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Nonzero vrf Protocol State last clear time"
|
|
::= { rcKhiHighLevel 46 }
|
|
|
|
rcKhiHighLevelIstCurrentStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Key Health Indicction, IST current status"
|
|
::= { rcKhiHighLevel 47 }
|
|
|
|
rcKhiHighLevelIstFirstHighestEvent OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Key Health Indicction, IST changing status since last
|
|
boot or clear "
|
|
::= { rcKhiHighLevel 48 }
|
|
|
|
rcKhiHighLevelIstFirstHighestEventTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of first change Ist Status"
|
|
::= { rcKhiHighLevel 49 }
|
|
|
|
rcKhiHighLevelIstStatusLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ist Status last Clear timestamp"
|
|
::= { rcKhiHighLevel 50 }
|
|
|
|
rcKhiHighLevelSmltOperPortsCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current total numbers of SMLT operational ports"
|
|
::= { rcKhiHighLevel 51 }
|
|
|
|
rcKhiHighLevelSmltOperPortsChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of first change Smlt operational ports"
|
|
::= { rcKhiHighLevel 52 }
|
|
|
|
rcKhiHighLevelSmltOperPortsReferenceCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Reference count of SMLT operational ports before
|
|
the first chaneg since last boot or clear"
|
|
::= { rcKhiHighLevel 53 }
|
|
|
|
rcKhiHighLevelSmltOperPortsLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SMLT operational ports count last Clear timestamp"
|
|
::= { rcKhiHighLevel 54 }
|
|
|
|
rcKhiHighLevelTotalSmltConfigPorts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT configured ports"
|
|
::= { rcKhiHighLevel 55 }
|
|
|
|
rcKhiHighLevelLogCurrentStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Logging task current status"
|
|
::= { rcKhiHighLevel 56 }
|
|
|
|
rcKhiHighLevelLogFirstHighestEvent OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The highest inidcation of the first change of logging
|
|
task status since last boot or clear "
|
|
::= { rcKhiHighLevel 57 }
|
|
|
|
rcKhiHighLevelLogFirstHighestEventTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of first change logging task Status"
|
|
::= { rcKhiHighLevel 58 }
|
|
|
|
rcKhiHighLevelLogRefStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "log referemce status before the first change
|
|
since last boot or clear "
|
|
::= { rcKhiHighLevel 59 }
|
|
|
|
rcKhiHighLevelLogStatusLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ist Status last Clear timestamp"
|
|
::= { rcKhiHighLevel 60 }
|
|
|
|
rcKhiHighLevelNumOfTcpConnection OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of TCP connections"
|
|
::= { rcKhiHighLevel 61 }
|
|
|
|
rcKhiHighLevelNumOfActiveTcpConnection OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of TCP connections which is establish"
|
|
::= { rcKhiHighLevel 62 }
|
|
|
|
rcKhiHighLevelNumOfCliUsers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of CLI sesssion"
|
|
::= { rcKhiHighLevel 63 }
|
|
|
|
|
|
rcKhiChassis OBJECT IDENTIFIER ::= { rcKhi 3 }
|
|
|
|
rcKhiChassisChasTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the core operating temperature
|
|
of the chassis. This value represents the degree
|
|
in celsius of the air inside the chassis."
|
|
::= { rcKhiChassis 1 }
|
|
|
|
rcKhiChassisTemperatureFirstHigherAlert OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the the first higher temperature
|
|
alert of the chassis since last boot or clear. The
|
|
value is the degree in celsius."
|
|
::= { rcKhiChassis 2 }
|
|
|
|
rcKhiChassisTemperatureFirstHigherAlertTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time at which the first higher temperature alert
|
|
occur."
|
|
::= { rcKhiChassis 3 }
|
|
|
|
rcKhiChassisChasTemperatureStatusIndication OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "KHI Status indication"
|
|
::= { rcKhiChassis 4 }
|
|
|
|
rcKhiChassisMasterCpuMezzOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unsupported(1),
|
|
notPresent(2),
|
|
present(3),
|
|
running(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the CPU Mezz card"
|
|
::= { rcKhiChassis 5 }
|
|
|
|
rcKhiChassisMasterCpuMezzStatusIndication OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the CPU Mezz card status indication"
|
|
::= { rcKhiChassis 6 }
|
|
|
|
rcKhiChassisStandbyCpuMezzOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unsupported(1),
|
|
notPresent(2),
|
|
present(3),
|
|
running(4),
|
|
notapplicable(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the CPU Mezz card"
|
|
::= { rcKhiChassis 7 }
|
|
|
|
rcKhiChassisStandbyCpuMezzStatusIndication OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the CPU Mezz card"
|
|
::= { rcKhiChassis 8 }
|
|
|
|
rcKhiChassisStandbyCpuState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initialization(1),
|
|
oneWayActive(2),
|
|
twoWayActive(3),
|
|
synchronized(4),
|
|
remoteIncompatible(5),
|
|
error(6),
|
|
disabled(7),
|
|
peerNotConnected(8),
|
|
peerConnected(9),
|
|
lostPeerConnection(10),
|
|
notSynchronized(11),
|
|
notapplicable(12)
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the standby-CPU state.
|
|
initialization - indicate the CPU is in this state (1).
|
|
oneWayActive - Modules that need to be synchronized
|
|
have registered with the framework (either
|
|
locally or a message was received from
|
|
remote CPU (2).
|
|
twoWayActive - Modules that need to be synchronized have
|
|
registered with the framework (either
|
|
locally or a message was received from
|
|
remote CPU (3).
|
|
synchronized - Table based synchroniztion was completed
|
|
on the current CPU (4).
|
|
remoteIncompatible - CPUs framework version is incompatible
|
|
with the remote CPU (5).
|
|
error - If an invalid event is generated in a given state the
|
|
CPU enters Error state (6).
|
|
disabled - High Availability is not enabled (7).
|
|
peerNotConnected - no peer connection is established (8).
|
|
peerConnected - peer connection is established (9).
|
|
lostPeerConnection - lost connection to peer/Standby CPU (10).
|
|
notSynchronized - Table Sync is not complete (11)."
|
|
::= { rcKhiChassis 9 }
|
|
|
|
rcKhiChassisStandbyCpuStatusIndication OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the Ha-CPU status indicaton"
|
|
::= { rcKhiChassis 10 }
|
|
|
|
-- KHI Chassis History MIB
|
|
|
|
rcKhiChassisHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiChassisHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Chassis table include chassis history info"
|
|
::= { rcKhiChassis 11 }
|
|
|
|
rcKhiChassisHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiChassisHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A chassis history table entry."
|
|
INDEX { rcKhiChassisHistoryIndex }
|
|
::= { rcKhiChassisHistoryTable 1 }
|
|
|
|
RcKhiChassisHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiChassisHistoryIndex Integer32,
|
|
rcKhiChassisHistoryTemperatureStateChange KhiStatusValue,
|
|
rcKhiChassisHistoryTemperatureStateChangeTime DateAndTime
|
|
}
|
|
|
|
rcKhiChassisHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "history index for chassis"
|
|
::= { rcKhiChassisHistoryEntry 1 }
|
|
|
|
rcKhiChassisHistoryTemperatureStateChange OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Chassis temperature state change. Green if
|
|
temperature <=40, Yellow if temperature >=41
|
|
and <50 and Red if temperature >=50"
|
|
::= { rcKhiChassisHistoryEntry 2 }
|
|
|
|
rcKhiChassisHistoryTemperatureStateChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time at which the temperature state change occur."
|
|
::= { rcKhiChassisHistoryEntry 3 }
|
|
|
|
-- KHI Chassis Power Supply MIB
|
|
|
|
-- KHI Chassis Fan MIB
|
|
|
|
rcKhiChassisFanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiChassisFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Fan table include Fan statistics"
|
|
::= { rcKhiChassis 12 }
|
|
|
|
rcKhiChassisFanEntry OBJECT-TYPE
|
|
SYNTAX RcKhiChassisFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A chassis fan table entry."
|
|
INDEX { rcKhiChassisFanId }
|
|
::= { rcKhiChassisFanTable 1 }
|
|
RcKhiChassisFanEntry ::=
|
|
SEQUENCE {
|
|
rcKhiChassisFanId Integer32,
|
|
rcKhiChassisFanOperState INTEGER,
|
|
rcKhiChassisFanFirstStateChange INTEGER,
|
|
rcKhiChassisFanFirstStateChangeTime DateAndTime,
|
|
rcKhiChassisFanOperStatusIndication KhiStatusValue,
|
|
rcKhiChassisFanTemperature Gauge32,
|
|
rcKhiChassisFanTempFirstHigherAlert Gauge32,
|
|
rcKhiChassisFanTempFirstHigherAlertTime DateAndTime,
|
|
rcKhiChassisFanTempStatusIndication KhiStatusValue
|
|
}
|
|
|
|
rcKhiChassisFanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiChassisFanEntry 1 }
|
|
|
|
rcKhiChassisFanOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
up(2),
|
|
down(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fan operational state"
|
|
::= { rcKhiChassisFanEntry 2 }
|
|
|
|
rcKhiChassisFanFirstStateChange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
up(2),
|
|
down(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fan operational state first change after boot or clear."
|
|
::= { rcKhiChassisFanEntry 3 }
|
|
|
|
rcKhiChassisFanFirstStateChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time at which the fan operational state first change occur."
|
|
::= { rcKhiChassisFanEntry 4 }
|
|
|
|
rcKhiChassisFanOperStatusIndication OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fan oper state status indication"
|
|
::= { rcKhiChassisFanEntry 5 }
|
|
|
|
rcKhiChassisFanTemperature OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fan 1 temperature"
|
|
::= { rcKhiChassisFanEntry 6 }
|
|
|
|
rcKhiChassisFanTempFirstHigherAlert OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fan temperature first higher alert"
|
|
::= { rcKhiChassisFanEntry 7 }
|
|
|
|
rcKhiChassisFanTempFirstHigherAlertTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time at which the fan temperature first higher alert occur"
|
|
::= { rcKhiChassisFanEntry 8 }
|
|
|
|
rcKhiChassisFanTempStatusIndication OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fan status indication"
|
|
::= { rcKhiChassisFanEntry 9 }
|
|
|
|
-- KHI Chassis Fan Oper State History MIB
|
|
|
|
rcKhiChassisFanOperHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiChassisFanOperHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Fan table include Fan operational state history info"
|
|
::= { rcKhiChassis 13 }
|
|
|
|
rcKhiChassisFanOperHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiChassisFanOperHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A chassis fan oper state history table entry."
|
|
INDEX { rcKhiChassisFanOperHistoryFanId, rcKhiChassisFanOperHistoryIndex }
|
|
::= { rcKhiChassisFanOperHistoryTable 1 }
|
|
|
|
RcKhiChassisFanOperHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiChassisFanOperHistoryFanId Integer32,
|
|
rcKhiChassisFanOperHistoryIndex Integer32,
|
|
rcKhiChassisFanOperHistoryStateChange KhiStatusValue,
|
|
rcKhiChassisFanOperHistoryStateChangeTime DateAndTime
|
|
}
|
|
|
|
rcKhiChassisFanOperHistoryFanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiChassisFanOperHistoryEntry 1 }
|
|
|
|
rcKhiChassisFanOperHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "history index for a particular fan"
|
|
::= { rcKhiChassisFanOperHistoryEntry 2 }
|
|
|
|
rcKhiChassisFanOperHistoryStateChange OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fan operational state change.
|
|
Up - Green and Down - Red"
|
|
::= { rcKhiChassisFanOperHistoryEntry 3 }
|
|
|
|
rcKhiChassisFanOperHistoryStateChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time at which the fan operational state change occur."
|
|
::= { rcKhiChassisFanOperHistoryEntry 4 }
|
|
|
|
-- KHI Chassis Fan Temperature History MIB
|
|
|
|
rcKhiChassisFanTempHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiChassisFanTempHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Fan table include Fan temperature history info"
|
|
::= { rcKhiChassis 14 }
|
|
|
|
rcKhiChassisFanTempHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiChassisFanTempHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A chassis fan Temperature history table entry."
|
|
INDEX { rcKhiChassisFanTempHistoryFanId, rcKhiChassisFanTempHistoryIndex }
|
|
::= { rcKhiChassisFanTempHistoryTable 1 }
|
|
|
|
RcKhiChassisFanTempHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiChassisFanTempHistoryFanId Integer32,
|
|
rcKhiChassisFanTempHistoryIndex Integer32,
|
|
rcKhiChassisFanTempHistoryTempStateChange KhiStatusValue,
|
|
rcKhiChassisFanTempHistoryTempStateChangeTime DateAndTime
|
|
}
|
|
|
|
rcKhiChassisFanTempHistoryFanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiChassisFanTempHistoryEntry 1 }
|
|
|
|
rcKhiChassisFanTempHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "history index for a particular fan"
|
|
::= { rcKhiChassisFanTempHistoryEntry 2 }
|
|
|
|
rcKhiChassisFanTempHistoryTempStateChange OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fan temperature state change. Green if
|
|
temperature <=40, Yellow if temperature >=41
|
|
and <50 and Red if temperature >=50"
|
|
::= { rcKhiChassisFanTempHistoryEntry 3 }
|
|
|
|
rcKhiChassisFanTempHistoryTempStateChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time at which the fan temperature state change occur."
|
|
::= { rcKhiChassisFanTempHistoryEntry 4 }
|
|
|
|
-- KHI Chassis Power Supply MIB
|
|
|
|
rcKhiChassisPowerSupplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiChassisPowerSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Power Supply table include Power Supply statistics"
|
|
::= { rcKhiChassis 15 }
|
|
|
|
rcKhiChassisPowerSupplyEntry OBJECT-TYPE
|
|
SYNTAX RcKhiChassisPowerSupplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A chassis fan table entry."
|
|
INDEX { rcKhiChassisPowerSupplyId }
|
|
::= { rcKhiChassisPowerSupplyTable 1 }
|
|
RcKhiChassisPowerSupplyEntry ::=
|
|
SEQUENCE {
|
|
rcKhiChassisPowerSupplyId Integer32,
|
|
rcKhiChassisPowerSupplyOperState INTEGER,
|
|
rcKhiChassisPowerSupplyFirstStateChange INTEGER,
|
|
rcKhiChassisPowerSupplyFirstStateChangeTime DateAndTime,
|
|
rcKhiChassisPowerSupplyStatusIndication KhiStatusValue
|
|
}
|
|
rcKhiChassisPowerSupplyId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
Power Supply in the system."
|
|
::= { rcKhiChassisPowerSupplyEntry 1 }
|
|
|
|
rcKhiChassisPowerSupplyOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
empty(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Power Supply operational state"
|
|
::= { rcKhiChassisPowerSupplyEntry 2 }
|
|
|
|
rcKhiChassisPowerSupplyFirstStateChange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
empty(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Power Supply operational state First change after boot or clear."
|
|
::= { rcKhiChassisPowerSupplyEntry 3 }
|
|
|
|
rcKhiChassisPowerSupplyFirstStateChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time at which Power Supply State first change occur."
|
|
::= { rcKhiChassisPowerSupplyEntry 4 }
|
|
|
|
rcKhiChassisPowerSupplyStatusIndication OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Power Supply status indication"
|
|
::= { rcKhiChassisPowerSupplyEntry 5 }
|
|
|
|
-- KHI Chassis PowerSupply History MIB
|
|
|
|
rcKhiChassisPowerSupplyHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiChassisPowerSupplyHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Power Supply table include power supply history info"
|
|
::= { rcKhiChassis 16 }
|
|
|
|
rcKhiChassisPowerSupplyHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiChassisPowerSupplyHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A chassis power supply history table entry."
|
|
INDEX { rcKhiChassisPowerSupplyHistoryPSId, rcKhiChassisPowerSupplyHistoryIndex }
|
|
::= { rcKhiChassisPowerSupplyHistoryTable 1 }
|
|
|
|
RcKhiChassisPowerSupplyHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiChassisPowerSupplyHistoryPSId Integer32,
|
|
rcKhiChassisPowerSupplyHistoryIndex Integer32,
|
|
rcKhiChassisPowerSupplyHistoryOperStateChange KhiStatusValue,
|
|
rcKhiChassisPowerSupplyHistoryOperStateChangeTime DateAndTime
|
|
}
|
|
|
|
rcKhiChassisPowerSupplyHistoryPSId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
PowerSupply in the system."
|
|
::= { rcKhiChassisPowerSupplyHistoryEntry 1 }
|
|
|
|
rcKhiChassisPowerSupplyHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "history index for a particular power supply"
|
|
::= { rcKhiChassisPowerSupplyHistoryEntry 2 }
|
|
|
|
rcKhiChassisPowerSupplyHistoryOperStateChange OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Power supply operational state change. Green if
|
|
power supply comes up and Red if it goes down"
|
|
::= { rcKhiChassisPowerSupplyHistoryEntry 3 }
|
|
|
|
rcKhiChassisPowerSupplyHistoryOperStateChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time at which the power supply operational state change occur."
|
|
::= { rcKhiChassisPowerSupplyHistoryEntry 4 }
|
|
|
|
-- KHI Line card table
|
|
|
|
rcKhiChassisLineCardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiChassisLineCardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table include line card statistics"
|
|
::= { rcKhiChassis 17 }
|
|
|
|
rcKhiChassisLineCardEntry OBJECT-TYPE
|
|
SYNTAX RcKhiChassisLineCardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A chassis line card table entry."
|
|
INDEX { rcKhiChassisLineCardSlot }
|
|
::= { rcKhiChassisLineCardTable 1 }
|
|
RcKhiChassisLineCardEntry ::=
|
|
SEQUENCE {
|
|
rcKhiChassisLineCardSlot Integer32,
|
|
rcKhiChassisLineCardOperState INTEGER,
|
|
rcKhiChassisLineCardAdminState EnableValue,
|
|
rcKhiChassisLineCardFirstStateChange KhiStatusValue,
|
|
rcKhiChassisLineCardFirstStateChangeTime DateAndTime,
|
|
rcKhiChassisLineCardStatusIndication KhiStatusValue
|
|
}
|
|
|
|
rcKhiChassisLineCardSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
slot of line card in the system."
|
|
::= { rcKhiChassisLineCardEntry 1 }
|
|
|
|
rcKhiChassisLineCardOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
testing(3),
|
|
unknown(4),
|
|
dormant(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Line card operational state"
|
|
::= { rcKhiChassisLineCardEntry 2 }
|
|
|
|
rcKhiChassisLineCardAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Line card administrative state"
|
|
::= { rcKhiChassisLineCardEntry 3 }
|
|
|
|
rcKhiChassisLineCardFirstStateChange OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Line card first operational state change after boot or clear."
|
|
::= { rcKhiChassisLineCardEntry 4 }
|
|
|
|
rcKhiChassisLineCardFirstStateChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time at which line card first operational state change occur."
|
|
::= { rcKhiChassisLineCardEntry 5 }
|
|
|
|
rcKhiChassisLineCardStatusIndication OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Line card Status indication"
|
|
::= { rcKhiChassisLineCardEntry 6 }
|
|
|
|
-- KHI Chassis Line Card History MIB
|
|
|
|
rcKhiChassisLineCardHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiChassisLineCardHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Line card table include line card history info"
|
|
::= { rcKhiChassis 18 }
|
|
|
|
rcKhiChassisLineCardHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiChassisLineCardHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A chassis line card history table entry."
|
|
INDEX { rcKhiChassisLineCardHistoryLCId, rcKhiChassisLineCardHistoryIndex }
|
|
::= { rcKhiChassisLineCardHistoryTable 1 }
|
|
|
|
RcKhiChassisLineCardHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiChassisLineCardHistoryLCId Integer32,
|
|
rcKhiChassisLineCardHistoryIndex Integer32,
|
|
rcKhiChassisLineCardHistoryOperStateChange KhiStatusValue,
|
|
rcKhiChassisLineCardHistoryOperStateChangeTime DateAndTime
|
|
}
|
|
|
|
rcKhiChassisLineCardHistoryLCId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
LineCard in the system."
|
|
::= { rcKhiChassisLineCardHistoryEntry 1 }
|
|
|
|
rcKhiChassisLineCardHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "history index for a particular line card"
|
|
::= { rcKhiChassisLineCardHistoryEntry 2 }
|
|
|
|
rcKhiChassisLineCardHistoryOperStateChange OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Line card operational state change. Green
|
|
if operationally up. Yellow if operationally
|
|
down and adminstratively disabled. Red if
|
|
operationally down and adminstratively enabled"
|
|
::= { rcKhiChassisLineCardHistoryEntry 3 }
|
|
|
|
rcKhiChassisLineCardHistoryOperStateChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time at which the line card operational state change occur."
|
|
::= { rcKhiChassisLineCardHistoryEntry 4 }
|
|
|
|
rcKhiPerformance OBJECT IDENTIFIER ::= { rcKhi 4 }
|
|
|
|
rcKhiPerformanceCurrentCpuUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current Percentage of CPU utilization in 5 minutes
|
|
sampling. Status: Yellow: above 75 Green: below 75"
|
|
::= { rcKhiPerformance 1 }
|
|
|
|
rcKhiPerformanceFirstHigherCpuUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FirstHigher Percentage of CPU utilization in 5 minutes
|
|
sampling. Status: Yellow: above 75 Green: below 75"
|
|
::= { rcKhiPerformance 2 }
|
|
|
|
rcKhiPerformanceCpuUtilFirstHigherAlertTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the high cpu utilization"
|
|
::= { rcKhiPerformance 3 }
|
|
|
|
rcKhiPerformanceCpuUtilStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the high cpu utilization status"
|
|
::= { rcKhiPerformance 4}
|
|
|
|
rcKhiPerformanceCurrentSwitchFabricUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current Percentage of Switching Fabric utilization"
|
|
::= { rcKhiPerformance 5}
|
|
|
|
rcKhiPerformanceFirstHigherSwitchFabricUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FirstHigher Percentage of Switching Fabric utilization"
|
|
::= { rcKhiPerformance 6}
|
|
|
|
rcKhiPerformanceSwitchFabricUtilFirstHigherAlertTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of ciritcal Percentage of Switching
|
|
Fabric utilization"
|
|
::= { rcKhiPerformance 7}
|
|
|
|
rcKhiPerformanceSwitchFabricUtilStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Switch Fabric Utilization Status"
|
|
::= { rcKhiPerformance 8}
|
|
|
|
rcKhiPerformanceCurrentOtherSwitchFabricUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current Percentage of Other Switching Fabric utilization"
|
|
::= { rcKhiPerformance 9}
|
|
|
|
rcKhiPerformanceFirstHigherOtherSwitchFabricUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FirstHigher Percentage of Other Switching Fabric utilization"
|
|
::= { rcKhiPerformance 10}
|
|
|
|
rcKhiPerformanceOtherSwitchFabricUtilFirstHigherAlertTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of ciritcal percentage of other Switching
|
|
Fabric utilization"
|
|
::= { rcKhiPerformance 11}
|
|
|
|
rcKhiPerformanceOtherSwitchFabricUtilStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Other Switch Fabric Utilization Status"
|
|
::= { rcKhiPerformance 12}
|
|
|
|
rcKhiPerformanceCurrentBufferUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current Percentage of buffer utilization"
|
|
::= { rcKhiPerformance 13}
|
|
|
|
rcKhiPerformanceFirstHigherBufferUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FirstHigher Percentage of buffer utilization"
|
|
::= { rcKhiPerformance 14 }
|
|
|
|
rcKhiPerformanceBufferUtilFirstHigherAlertTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of critical Percentage of
|
|
buffer utilization"
|
|
::= { rcKhiPerformance 15 }
|
|
|
|
rcKhiPerformanceBufferUtilStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Buffer Utilization Status"
|
|
::= { rcKhiPerformance 16 }
|
|
|
|
rcKhiPerformanceCurrentDRamUsed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current Percentage of used DRAM in Kbytes"
|
|
::= { rcKhiPerformance 17 }
|
|
|
|
rcKhiPerformanceFirstHigherDRamUsed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FirstHigher Percentage of used DRAM in Kbytes"
|
|
::= { rcKhiPerformance 18 }
|
|
|
|
rcKhiPerformanceDRamUsedFirstHigherAlertTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of ciritcal percentage of used DRAM in Kbytes "
|
|
::= { rcKhiPerformance 19 }
|
|
|
|
rcKhiPerformanceDRamUsedStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dynamic Random Access Memory Utilization Status"
|
|
::= { rcKhiPerformance 20 }
|
|
|
|
rcKhiPerformanceSuspendedTaskStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Suspended Tasks Status"
|
|
::= { rcKhiPerformance 21 }
|
|
|
|
rcKhiPerformanceCPUControlFirstHigherAlertTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of First Higher Alert for CPU Control"
|
|
::= { rcKhiPerformance 22 }
|
|
|
|
rcKhiPerformanceCPUControlStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CPU Control Status"
|
|
::= { rcKhiPerformance 23 }
|
|
|
|
rcKhiPerformanceCurrentNoFBuf OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current Number of None free buffer"
|
|
::= { rcKhiPerformance 24 }
|
|
|
|
rcKhiPerformanceFirstHigherNoFBuf OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FirstHigher Number of None free buffer"
|
|
::= { rcKhiPerformance 25 }
|
|
|
|
rcKhiPerformanceCurrentTxPacketsDropped OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current Tx packet dropped"
|
|
::= { rcKhiPerformance 26 }
|
|
|
|
rcKhiPerformanceFirstHigherTxPacketsDropped OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FirstHigher Tx packet dropped"
|
|
::= { rcKhiPerformance 27 }
|
|
|
|
rcKhiPerformanceCurrentOutError OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current Out errors"
|
|
::= { rcKhiPerformance 28 }
|
|
|
|
rcKhiPerformanceFirstHigherOutError OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FirstHigher Out errors"
|
|
::= { rcKhiPerformance 29 }
|
|
|
|
rcKhiPerformanceSuspendedTaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiPerformanceSuspendedTaskEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Suspended tasks table"
|
|
::= { rcKhiPerformance 30 }
|
|
|
|
rcKhiPerformanceSuspendedTaskEntry OBJECT-TYPE
|
|
SYNTAX RcKhiPerformanceSuspendedTaskEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Suspeded task table entry."
|
|
INDEX { rcKhiPerformanceSuspendedTaskIndex }
|
|
::= { rcKhiPerformanceSuspendedTaskTable 1 }
|
|
|
|
RcKhiPerformanceSuspendedTaskEntry ::=
|
|
SEQUENCE {
|
|
rcKhiPerformanceSuspendedTaskIndex Integer32,
|
|
rcKhiPerformanceSuspendedTaskId Integer32,
|
|
rcKhiPerformanceSuspendedTaskName DisplayString,
|
|
rcKhiPerformanceSuspendedTaskSuspendedTime DateAndTime
|
|
}
|
|
|
|
rcKhiPerformanceSuspendedTaskIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
supended task index"
|
|
::= { rcKhiPerformanceSuspendedTaskEntry 1 }
|
|
|
|
rcKhiPerformanceSuspendedTaskId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique task id of suspeded task"
|
|
::= { rcKhiPerformanceSuspendedTaskEntry 2 }
|
|
|
|
rcKhiPerformanceSuspendedTaskName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique task id of suspeded task"
|
|
::= { rcKhiPerformanceSuspendedTaskEntry 3 }
|
|
|
|
rcKhiPerformanceSuspendedTaskSuspendedTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Suspeded task time"
|
|
::= { rcKhiPerformanceSuspendedTaskEntry 4 }
|
|
|
|
rcKhiPerformanceHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiPerformanceHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Performance History table"
|
|
::= { rcKhiPerformance 31 }
|
|
|
|
rcKhiPerformanceHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiPerformanceHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History Performance table entry."
|
|
INDEX { rcKhiPerformanceHistoryIndex }
|
|
::= { rcKhiPerformanceHistoryTable 1 }
|
|
|
|
RcKhiPerformanceHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiPerformanceHistoryIndex Integer32,
|
|
rcKhiPerformanceHistoryCpuUtil Gauge32,
|
|
rcKhiPerformanceHistoryCpuUtilTimeStamp DateAndTime,
|
|
rcKhiPerformanceHistorySwitchFabricUtil Gauge32,
|
|
rcKhiPerformanceHistorySwitchFabricUtilTimeStamp DateAndTime,
|
|
rcKhiPerformanceHistoryOtherSwitchFabricUtil Gauge32,
|
|
rcKhiPerformanceHistoryOtherSwitchFabricUtilTimeStamp DateAndTime,
|
|
rcKhiPerformanceHistoryBufferUtil Gauge32,
|
|
rcKhiPerformanceHistoryBufferUtilTimeStamp DateAndTime,
|
|
rcKhiPerformanceHistoryDRamUsed Gauge32,
|
|
rcKhiPerformanceHistoryDRamUsedTimeStamp DateAndTime,
|
|
rcKhiPerformanceHistoryCPUControlTimeStamp DateAndTime,
|
|
rcKhiPerformanceHistoryNoFBuf Gauge32,
|
|
rcKhiPerformanceHistoryTxPacketsDropped Gauge32,
|
|
rcKhiPerformanceHistoryOutError Gauge32
|
|
}
|
|
|
|
rcKhiPerformanceHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
performance history record"
|
|
::= { rcKhiPerformanceHistoryEntry 1 }
|
|
|
|
rcKhiPerformanceHistoryCpuUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History record for CPU utilization"
|
|
::= { rcKhiPerformanceHistoryEntry 2 }
|
|
|
|
rcKhiPerformanceHistoryCpuUtilTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the historical cpu utilization"
|
|
::= { rcKhiPerformanceHistoryEntry 3 }
|
|
|
|
rcKhiPerformanceHistorySwitchFabricUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Percentage of Switching Fabric utilization"
|
|
::= { rcKhiPerformanceHistoryEntry 4 }
|
|
|
|
rcKhiPerformanceHistorySwitchFabricUtilTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the historical switch fabric Utilization"
|
|
::= { rcKhiPerformanceHistoryEntry 5 }
|
|
|
|
rcKhiPerformanceHistoryOtherSwitchFabricUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Percentage of Other Switching Fabric utilization"
|
|
::= { rcKhiPerformanceHistoryEntry 6 }
|
|
|
|
rcKhiPerformanceHistoryOtherSwitchFabricUtilTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the historical other switch fabric Utilization"
|
|
::= { rcKhiPerformanceHistoryEntry 7 }
|
|
|
|
rcKhiPerformanceHistoryBufferUtil OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Percentage of Buffer utilization"
|
|
::= { rcKhiPerformanceHistoryEntry 8 }
|
|
|
|
rcKhiPerformanceHistoryBufferUtilTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the historical Buffer Utilization"
|
|
::= { rcKhiPerformanceHistoryEntry 9 }
|
|
|
|
rcKhiPerformanceHistoryDRamUsed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History DRAM Used"
|
|
::= { rcKhiPerformanceHistoryEntry 10 }
|
|
|
|
rcKhiPerformanceHistoryDRamUsedTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the historical DRAM Used"
|
|
::= { rcKhiPerformanceHistoryEntry 11 }
|
|
|
|
rcKhiPerformanceHistoryCPUControlTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the historical CPU Control"
|
|
::= { rcKhiPerformanceHistoryEntry 12 }
|
|
|
|
rcKhiPerformanceHistoryNoFBuf OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Number of None Free Buffer"
|
|
::= { rcKhiPerformanceHistoryEntry 13 }
|
|
|
|
rcKhiPerformanceHistoryTxPacketsDropped OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Tx Packets Dropped"
|
|
::= { rcKhiPerformanceHistoryEntry 14 }
|
|
|
|
rcKhiPerformanceHistoryOutError OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Out Errors"
|
|
::= { rcKhiPerformanceHistoryEntry 15 }
|
|
|
|
|
|
-- DFO PORT KHI - Packet Stats Table
|
|
|
|
rcKhiPort OBJECT IDENTIFIER ::= { rcKhi 5 }
|
|
|
|
rcKhiPortSystemStats OBJECT IDENTIFIER ::= { rcKhiPort 1 }
|
|
|
|
rcKhiPortSystemStatsTotalUnicastRxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of received Unicast packets
|
|
within the past 2 minutes."
|
|
::= { rcKhiPortSystemStats 1 }
|
|
|
|
rcKhiPortSystemStatsTotalUnicastTxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of transmitted Unicast packets
|
|
within the past 2 minutes."
|
|
::= { rcKhiPortSystemStats 2 }
|
|
|
|
rcKhiPortSystemStatsUnicastPktsTxRxRatio OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Tx/Rx Ratio for Total Unicast Packets
|
|
within the past 2 minutes."
|
|
::= { rcKhiPortSystemStats 3 }
|
|
|
|
rcKhiPortSystemStatsUnicastPktsTxRxRatioHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Unicast Packets Tx/Rx
|
|
ratio. Green if the ratio is less than 5%.
|
|
Yellow if it is between 5% and 50%. Red if it
|
|
is greater than 50%."
|
|
::= { rcKhiPortSystemStats 4 }
|
|
|
|
rcKhiPortSystemStatsTotalMulticastRxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of received Multicast packets
|
|
within the past 2 minutes."
|
|
::= { rcKhiPortSystemStats 5 }
|
|
|
|
rcKhiPortSystemStatsTotalMulticastTxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of transmitted Multicast packets
|
|
within the past 2 minutes."
|
|
::= { rcKhiPortSystemStats 6 }
|
|
|
|
rcKhiPortSystemStatsTotalBroadcastRxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of received Broadcast packets
|
|
within the past 2 minutes."
|
|
::= { rcKhiPortSystemStats 7 }
|
|
|
|
rcKhiPortSystemStatsTotalBroadcastTxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of transmitted Broadcast packets
|
|
within the past 2 minutes."
|
|
::= { rcKhiPortSystemStats 8 }
|
|
|
|
rcKhiPortState OBJECT IDENTIFIER ::= { rcKhiPort 2 }
|
|
|
|
rcKhiPortStateTotalPortsUp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of ports that are administratively
|
|
enabled and operationally up."
|
|
::= { rcKhiPortState 1 }
|
|
|
|
rcKhiPortStatePortsUpList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of ports that are administratively enabled
|
|
and operationally up."
|
|
::= { rcKhiPortState 2 }
|
|
|
|
rcKhiPortStatePortsUpReferenceList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Reference list of ports that are administratively enabled
|
|
and operationally up."
|
|
::= { rcKhiPortState 3 }
|
|
|
|
rcKhiPortStatePortsUpHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Ports Up list. When a clear operation
|
|
is issued, rcKhiPortStatePortsUpList is copied into
|
|
rcKhiPortStatePortsUpReferenceList and will be used as a
|
|
reference to indicate health. From that point onwards,
|
|
if rcKhiPortStatePortsUpList does not match
|
|
rcKhiPortStatePortsUpReferenceList, the health would be
|
|
indicated as Yellow. If it matches, it would be Green."
|
|
::= { rcKhiPortState 4 }
|
|
|
|
rcKhiPortStateTotalPortsDown OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of ports that are administratively
|
|
enabled and operationally down."
|
|
::= { rcKhiPortState 5 }
|
|
|
|
rcKhiPortStatePortsDownList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of ports that are administratively
|
|
enabled and operationally down."
|
|
::= { rcKhiPortState 6 }
|
|
|
|
rcKhiPortStateTotalSmltPortsUp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT ports that are
|
|
administratively enabled and operationally up."
|
|
::= { rcKhiPortState 7 }
|
|
|
|
rcKhiPortStateSmltPortsUpList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of SMLT ports that are administratively
|
|
enabled and operationally up."
|
|
::= { rcKhiPortState 8 }
|
|
|
|
rcKhiPortStateSmltPortsUpReferenceList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Reference list of SMLT ports that are administratively
|
|
enabled and operationally up."
|
|
::= { rcKhiPortState 9 }
|
|
|
|
rcKhiPortStateSmltPortsUpHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Ports Up list. When a clear operation
|
|
is issued, rcKhiPortStateSmltPortsUpList is copied into
|
|
rcKhiPortStateSmltPortsUpReferenceList and will be used as a
|
|
reference to indicate health. From that point onwards,
|
|
if rcKhiPortStatSmltePortsUpList does not match
|
|
rcKhiPortStateSmltPortsUpReferenceList, the health would be
|
|
indicated as Yellow. If it matches, it would be Green."
|
|
::= { rcKhiPortState 10 }
|
|
|
|
rcKhiPortStateTotalSmltPortsDown OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT ports that are
|
|
administratively enabled and operationally down."
|
|
::= { rcKhiPortState 11 }
|
|
|
|
rcKhiPortStateSmltPortsDownList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of SMLT ports that are administratively
|
|
enabled and operationally down."
|
|
::= { rcKhiPortState 12 }
|
|
|
|
rcKhiPortStateTotalIstPortsUp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of IST ports that are
|
|
administratively enabled and operationally up."
|
|
::= { rcKhiPortState 13 }
|
|
|
|
rcKhiPortStateIstPortsUpList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of IST ports that are administratively
|
|
enabled and operationally up."
|
|
::= { rcKhiPortState 14 }
|
|
|
|
rcKhiPortStateIstPortsUpReferenceList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Reference list of IST ports that are administratively
|
|
enabled and operationally up."
|
|
::= { rcKhiPortState 15 }
|
|
|
|
rcKhiPortStateIstPortsUpHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Ports Up list. When a clear operation
|
|
is issued, rcKhiPortStateIstPortsUpList is copied into
|
|
rcKhiPortStateIstPortsUpReferenceList and will be used as a
|
|
reference to indicate health. From that point onwards,
|
|
if rcKhiPortStateIstPortsUpList does not match
|
|
rcKhiPortStateIstPortsUpReferenceList, the health would be
|
|
indicated as Yellow. If it matches, it would be Green."
|
|
::= { rcKhiPortState 16 }
|
|
|
|
rcKhiPortStateTotalIstPortsDown OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of IST ports that are administratively
|
|
enabled and operationally down."
|
|
::= { rcKhiPortState 17 }
|
|
|
|
rcKhiPortStateIstPortsDownList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of IST ports that are administratively
|
|
enabled and operationally down."
|
|
::= { rcKhiPortState 18 }
|
|
|
|
rcKhiPortStateTotalPortUpEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of port up events."
|
|
::= { rcKhiPortState 19 }
|
|
|
|
rcKhiPortStatePortUpEventList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of ports that became operationally up."
|
|
::= { rcKhiPortState 20 }
|
|
|
|
rcKhiPortStatePortUpEventsHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Up Events Health Indication."
|
|
::= { rcKhiPortState 21 }
|
|
|
|
rcKhiPortStatePortUpEventFirstEventTs OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the first occurence of a
|
|
port up event after reboot or clear."
|
|
::= { rcKhiPortState 22 }
|
|
|
|
rcKhiPortStateTotalPortDownEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of port down events."
|
|
::= { rcKhiPortState 23 }
|
|
|
|
rcKhiPortStatePortDownEventList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of ports that became operationally down."
|
|
::= { rcKhiPortState 24 }
|
|
|
|
rcKhiPortStatePortDownEventsHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port Down Events Health Indication."
|
|
::= { rcKhiPortState 25 }
|
|
|
|
rcKhiPortStatePortDownEventFirstEventTs OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the first occurence of a
|
|
port down event after reboot or clear."
|
|
::= { rcKhiPortState 26 }
|
|
|
|
rcKhiPortStateTotalSmltPortUpEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT port up events."
|
|
::= { rcKhiPortState 27 }
|
|
|
|
rcKhiPortStateSmltPortUpEventList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of SMLT ports that became operationally up."
|
|
::= { rcKhiPortState 28 }
|
|
|
|
rcKhiPortStateSmltPortUpEventsHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SMLT Port Up Events Health Indication."
|
|
::= { rcKhiPortState 29 }
|
|
|
|
rcKhiPortStateSmltPortUpEventFirstEventTs OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the first occurence of a
|
|
SMLT port up event after reboot or clear."
|
|
::= { rcKhiPortState 30 }
|
|
|
|
rcKhiPortStateTotalSmltPortDownEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT port down events."
|
|
::= { rcKhiPortState 31 }
|
|
|
|
rcKhiPortStateSmltPortDownEventList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of SMLT ports that became operationally down."
|
|
::= { rcKhiPortState 32 }
|
|
|
|
rcKhiPortStateSmltPortDownEventsHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SMLT Port Down Events Health Indication."
|
|
::= { rcKhiPortState 33 }
|
|
|
|
rcKhiPortStateSmltPortDownEventFirstEventTs OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the first occurence of an
|
|
SMLT port down event after reboot or clear."
|
|
::= { rcKhiPortState 34 }
|
|
|
|
rcKhiPortStateTotalIstPortUpEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT port up events."
|
|
::= { rcKhiPortState 35 }
|
|
|
|
rcKhiPortStateIstPortUpEventList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of SMLT ports that became operationally up."
|
|
::= { rcKhiPortState 36 }
|
|
|
|
rcKhiPortStateIstPortUpEventsHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IST Port Up Events Health Indication."
|
|
::= { rcKhiPortState 37 }
|
|
|
|
rcKhiPortStateIstPortUpEventFirstEventTs OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the first occurence of a
|
|
IST port up event after reboot or clear."
|
|
::= { rcKhiPortState 38 }
|
|
|
|
rcKhiPortStateTotalIstPortDownEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT port down events."
|
|
::= { rcKhiPortState 39 }
|
|
|
|
rcKhiPortStateIstPortDownEventList OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "List of SMLT ports that became operationally down."
|
|
::= { rcKhiPortState 40 }
|
|
|
|
rcKhiPortStateIstPortDownEventsHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IST Port Down Events Health Indication."
|
|
::= { rcKhiPortState 41 }
|
|
|
|
rcKhiPortStateIstPortDownEventFirstEventTs OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp of the first occurence of an
|
|
IST port down event after reboot or clear."
|
|
::= { rcKhiPortState 42 }
|
|
|
|
-- DFO PORT KHI - Port State Events Historical Data
|
|
|
|
rcKhiPortStateEventsHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiPortStateEventsHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port State Events Historical Data."
|
|
::= { rcKhiPortState 43 }
|
|
|
|
rcKhiPortStateEventsHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiPortStateEventsHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port State Events history table entry."
|
|
INDEX { rcKhiPortStateEventsHistoryIndex }
|
|
::= { rcKhiPortStateEventsHistoryTable 1 }
|
|
|
|
RcKhiPortStateEventsHistoryEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiPortStateEventsHistoryIndex INTEGER,
|
|
rcKhiPortStateEventsHistoryTimestamp DateAndTime,
|
|
rcKhiPortStateEventsHistoryPort INTEGER,
|
|
rcKhiPortStateEventsHistoryEvent INTEGER
|
|
}
|
|
|
|
rcKhiPortStateEventsHistoryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Historical data index number."
|
|
::= { rcKhiPortStateEventsHistoryEntry 1 }
|
|
|
|
rcKhiPortStateEventsHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp indicating when the event occurred."
|
|
::= { rcKhiPortStateEventsHistoryEntry 2 }
|
|
|
|
rcKhiPortStateEventsHistoryPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port number where the event occurred."
|
|
::= { rcKhiPortStateEventsHistoryEntry 3 }
|
|
|
|
rcKhiPortStateEventsHistoryEvent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
portUp(1),
|
|
portDown(2),
|
|
smltPortUp(3),
|
|
smltPortDown(4),
|
|
istPortUp(5),
|
|
istPortDown(6),
|
|
ucastPktTxRxRatioYellow(7),
|
|
ucastPktTxRxRatioRed(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indication about the event-type."
|
|
::= { rcKhiPortStateEventsHistoryEntry 4 }
|
|
|
|
rcKhiPortErrors OBJECT IDENTIFIER ::= { rcKhiPort 3 }
|
|
|
|
rcKhiPortErrorsEventsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiPortErrorsEventsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Error Events Data."
|
|
::= { rcKhiPortErrors 1 }
|
|
|
|
rcKhiPortErrorsEventsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiPortErrorsEventsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port error events table entry."
|
|
INDEX { rcKhiPortErrorsEventsPortNum }
|
|
::= { rcKhiPortErrorsEventsTable 1 }
|
|
|
|
RcKhiPortErrorsEventsEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiPortErrorsEventsPortNum INTEGER,
|
|
rcKhiPortErrorsEventsSingleCollisionErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsMultipleCollisionErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsLateCollisionErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsExcessiveCollisionErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsMacRxErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsMacTxErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsDeferTxErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsPacketErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsLinkInactiveErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsUnknownProtoErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsInFlwctrlErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsOutFlwctrlErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsAlignErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsFCSErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsFramesLongErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsTooShortErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsLinkFailureErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsCarrierSenseErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsCarrierErr KhiStatusValue,
|
|
rcKhiPortErrorsEventsSQETestErr KhiStatusValue
|
|
}
|
|
|
|
rcKhiPortErrorsEventsPortNum OBJECT-TYPE
|
|
SYNTAX INTEGER(1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port number where the event occurred."
|
|
::= { rcKhiPortErrorsEventsEntry 1 }
|
|
|
|
rcKhiPortErrorsEventsSingleCollisionErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Single Collisions
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 2 }
|
|
|
|
rcKhiPortErrorsEventsMultipleCollisionErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Multiple Collisions
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 3 }
|
|
|
|
rcKhiPortErrorsEventsLateCollisionErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Late Collisions
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 4 }
|
|
|
|
rcKhiPortErrorsEventsExcessiveCollisionErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Excessive Collisions
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 5 }
|
|
|
|
rcKhiPortErrorsEventsMacRxErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Mac Rx errors
|
|
on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 6 }
|
|
|
|
rcKhiPortErrorsEventsMacTxErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Mac Tx errors
|
|
on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 7 }
|
|
|
|
rcKhiPortErrorsEventsDeferTxErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Defer Tx errors
|
|
on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 8 }
|
|
|
|
rcKhiPortErrorsEventsPacketErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Packet errors
|
|
on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 9 }
|
|
|
|
rcKhiPortErrorsEventsLinkInactiveErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Link Inactive
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 10 }
|
|
|
|
rcKhiPortErrorsEventsUnknownProtoErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Unknown Proto
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 11 }
|
|
|
|
rcKhiPortErrorsEventsInFlwctrlErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for In Flwctrl
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 12 }
|
|
|
|
rcKhiPortErrorsEventsOutFlwctrlErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Out Flwctrl
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 13 }
|
|
|
|
rcKhiPortErrorsEventsAlignErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Align errors
|
|
on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 14 }
|
|
|
|
rcKhiPortErrorsEventsFCSErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for FCS errors
|
|
on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 15 }
|
|
|
|
rcKhiPortErrorsEventsFramesLongErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Frames Long
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 16 }
|
|
|
|
rcKhiPortErrorsEventsTooShortErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Too Short
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 17 }
|
|
|
|
rcKhiPortErrorsEventsLinkFailureErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Link Failure
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 18 }
|
|
|
|
rcKhiPortErrorsEventsCarrierSenseErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Carrier Sense
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 19 }
|
|
|
|
rcKhiPortErrorsEventsCarrierErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for Carrier errors
|
|
on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 20 }
|
|
|
|
rcKhiPortErrorsEventsSQETestErr OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Health Indication for SQE Test
|
|
errors on the port."
|
|
::= { rcKhiPortErrorsEventsEntry 21 }
|
|
|
|
-- DFO PORT KHI - Port Error Events Historical Data
|
|
|
|
rcKhiPortErrorsHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiPortErrorsHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Errors Historical Data."
|
|
::= { rcKhiPortErrors 2 }
|
|
|
|
rcKhiPortErrorsHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiPortErrorsHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port errors history table entry."
|
|
INDEX { rcKhiPortErrorsHistoryIndex }
|
|
::= { rcKhiPortErrorsHistoryTable 1 }
|
|
|
|
RcKhiPortErrorsHistoryEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiPortErrorsHistoryIndex INTEGER,
|
|
rcKhiPortErrorsHistoryTimestamp DateAndTime,
|
|
rcKhiPortErrorsHistoryPort INTEGER,
|
|
rcKhiPortErrorsHistoryErrorEvents BITS
|
|
}
|
|
|
|
rcKhiPortErrorsHistoryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index number."
|
|
::= { rcKhiPortErrorsHistoryEntry 1 }
|
|
|
|
rcKhiPortErrorsHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp indicating when the event occurred."
|
|
::= { rcKhiPortErrorsHistoryEntry 2 }
|
|
|
|
rcKhiPortErrorsHistoryPort OBJECT-TYPE
|
|
SYNTAX INTEGER(1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port number where the event occurred."
|
|
::= { rcKhiPortErrorsHistoryEntry 3 }
|
|
|
|
rcKhiPortErrorsHistoryErrorEvents OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
singleCollisionErrors(0),
|
|
multipleCollisionErrors(1),
|
|
lateCollisionErrors(2),
|
|
excessiveCollisionErrors(3),
|
|
macRxErrors(4),
|
|
macTxErrors(5),
|
|
deferTxErrors(6),
|
|
packetErrors(7),
|
|
linkInactiveErrors(8),
|
|
unknownProtoErrors(9),
|
|
inFlwctrlErrors(10),
|
|
outFlwctrlErrors(11),
|
|
alignErrors(12),
|
|
fcsErrors(13),
|
|
framesLongErrors(14),
|
|
tooShortErrors(15),
|
|
linkFailureErrors(16),
|
|
carrierSenseErrors(17),
|
|
carrierErrors(18),
|
|
sqeTestErrors(19)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is used to specify the port error information.
|
|
bit 0 - Single Collision Errors
|
|
bit 1 - Multiple Collision Errors
|
|
bit 2 - Late Collision Errors
|
|
bit 3 - Excessive Collision Errors
|
|
bit 4 - Mac Rx Errors
|
|
bit 5 - Mac Tx Errors
|
|
bit 6 - Defer Tx Errors
|
|
bit 7 - Packet Errors
|
|
bit 8 - Link Inactive Errors
|
|
bit 9 - Unknown Proto Errors
|
|
bit 10 - In Flwctrl Errors
|
|
bit 11 - Out Flwctrl Errors
|
|
bit 12 - Align Errors
|
|
bit 13 - FCS Errors
|
|
bit 14 - Frames Long Errors
|
|
bit 15 - Too Short Errors
|
|
bit 16 - Link Failure Errors
|
|
bit 17 - Carrier Sense Errors
|
|
bit 18 - Carrier Errors
|
|
bit 19 - SQE Test Errors"
|
|
::= { rcKhiPortErrorsHistoryEntry 4 }
|
|
|
|
|
|
-- DFO FORWARDING KHI Asic Health
|
|
|
|
rcKhiForwarding OBJECT IDENTIFIER ::= { rcKhi 6 }
|
|
|
|
rcKhiForwardingAsicHealthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingAsicHealthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Asic Key Health Indicator MIB."
|
|
::= { rcKhiForwarding 1 }
|
|
|
|
rcKhiForwardingAsicHealthEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingAsicHealthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding KHI - Asic Health table entry."
|
|
INDEX { rcKhiForwardingAsicHealthSlotNumber }
|
|
::= { rcKhiForwardingAsicHealthTable 1 }
|
|
|
|
RcKhiForwardingAsicHealthEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiForwardingAsicHealthSlotNumber INTEGER,
|
|
rcKhiForwardingAsicHealthLeftLnIngBkPrsureRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthMidLnIngBkPrsureRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthRightLnIngBkPrsureRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthLeftLnIngBkPrsureRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthMidLnIngBkPrsureRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthRightLnIngBkPrsureRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthLeftLnIngSPIProtoRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthMidLnIngSPIProtoRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthRightLnIngSPIProtoRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthLeftLnIngSPIProtoRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthMidLnIngSPIProtoRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthRightLnIngSPIProtoRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthLeftLnIngSPIDefragCnt Integer32,
|
|
rcKhiForwardingAsicHealthMidLnIngSPIDefragCnt Integer32,
|
|
rcKhiForwardingAsicHealthRightLnIngSPIDefragCnt Integer32,
|
|
rcKhiForwardingAsicHealthLeftLnIngSPIDefragStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthMidLnIngSPIDefragStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthRightLnIngSPIDefragStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthMidLnEgrMcastQFullRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthRightLnEgrMcastQFullRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthMidLnEgrMcastQFullRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthRightLnEgrMcastQFullRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthMidLnEgrFreePgErrRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthRightLnEgrFreePgErrRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthMidLnEgrFreePgErrRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthRightLnEgrFreePgErrRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthMidLnEgrUcastQFullRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthRightLnEgrUcastQFullRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthMidLnEgrUcastQFullRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthRightLnEgrUcastQFullRstStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthMidLnEgrRepIDMismatchRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthRightLnEgrRepIDMismatchRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthMidLnEgrRepIDMismatchStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthRightLnEgrRepIDMismatchStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthMidLnEgrNoBeepBeepRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthRightLnEgrNoBeepBeepRstCnt Integer32,
|
|
rcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthMidLnEgrNoBeepBeepStatus KhiStatusValue,
|
|
rcKhiForwardingAsicHealthRightLnEgrNoBeepBeepStatus KhiStatusValue
|
|
}
|
|
|
|
rcKhiForwardingAsicHealthSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number."
|
|
::= { rcKhiForwardingAsicHealthEntry 1 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnIngBkPrsureRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Ingress
|
|
RSP Combined Back Pressure Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 2 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnIngBkPrsureRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Ingress
|
|
RSP Combined Back Pressure Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 3 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnIngBkPrsureRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Ingress
|
|
RSP Combined Back Pressure Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 4 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnIngBkPrsureRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Ingress RSP Back Pressure
|
|
Resets Health Indication. A zero count
|
|
would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 5 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnIngBkPrsureRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane ngress RSP Back Pressure Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 6 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnIngBkPrsureRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane Ingress RSP Back Pressure Resets Health
|
|
Indication. A zero count would indicate a Health
|
|
Status of Green and a non-zero count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 7 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnIngSPIProtoRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Ingress RSP
|
|
SPI Protocol Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 8 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnIngSPIProtoRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Ingress RSP
|
|
SPI Protocol Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 9 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnIngSPIProtoRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Ingress RSP
|
|
SPI Protocol Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 10 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnIngSPIProtoRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Ingress RSP SPI Protocol Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 11 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnIngSPIProtoRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane Ingress RSP SPI Protocol Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 12 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnIngSPIProtoRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane Ingress RSP SPI Protocol Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 13 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnIngSPIDefragCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Ingress RSP
|
|
SPI Defrag Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 14 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnIngSPIDefragCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Ingress RSP
|
|
SPI Defrag Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 15 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnIngSPIDefragCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Ingress RSP
|
|
SPI Defrag Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 16 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnIngSPIDefragStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Ingress RSP SPI Defrag Health
|
|
Indication. A zero count would indicate a
|
|
Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 17 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnIngSPIDefragStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane Ingress RSP SPI Defrag Health
|
|
Indication. A zero count would indicate a
|
|
Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 18 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnIngSPIDefragStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane Ingress RSP SPI Defrag Health
|
|
Indication. A zero count would indicate a
|
|
Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 19 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Egress RSP
|
|
Multicast Queue Full Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 20 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrMcastQFullRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Egress RSP
|
|
Multicast Queue Full Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 21 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrMcastQFullRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Egress RSP
|
|
Multicast Queue Full Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 22 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Egress RSP Multicast Queue Full
|
|
Resets Health Indication. A zero count would
|
|
indicate a Health Status of Green and a non-zero
|
|
count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 23 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrMcastQFullRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane Egress RSP Multicast Queue Full
|
|
Resets Health Indication. A zero count would
|
|
indicate a Health Status of Green and a non-zero
|
|
count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 24 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrMcastQFullRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane Egress RSP Multicast Queue Full
|
|
Resets Health Indication. A zero count would
|
|
indicate a Health Status of Green and a non-zero
|
|
count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 25 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Egress RSP Free
|
|
Page Error Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 26 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrFreePgErrRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Egress RSP Free
|
|
Page Error Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 27 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrFreePgErrRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Egress RSP Free
|
|
Page Error Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 28 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Egress RSP Free Page Error Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 29 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrFreePgErrRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane Egress RSP Free Page Error Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 30 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrFreePgErrRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Egress RSP Free Page Error Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 31 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Egress RSP Unicast
|
|
Queue Full Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 32 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrUcastQFullRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Egress RSP Unicast
|
|
Queue Full Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 33 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrUcastQFullRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Egress RSP Unicast
|
|
Queue Full Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 34 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Egress RSP Unicast Queue Full Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 35 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrUcastQFullRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane Egress RSP Unicast Queue Full Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 36 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrUcastQFullRstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane Egress RSP Unicast Queue Full Resets
|
|
Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 37 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Egress RSP Free Pages
|
|
at Lower Limit Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 39 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Egress RSP Free Pages
|
|
at Lower Limit Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 40 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Egress RSP Free Pages
|
|
at Lower Limit Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 41 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Egress RSP Free Pages at Lower Limit
|
|
Resets Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 42 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane Egress RSP Free Pages at Lower Limit
|
|
Resets Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 43 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane Egress RSP Free Pages at Lower Limit
|
|
Resets Health Indication. A zero count would indicate
|
|
a Health Status of Green and a non-zero count
|
|
would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 44 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Egress RSP Replication
|
|
ID Mismatch Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 45 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrRepIDMismatchRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Egress RSP Replication
|
|
ID Mismatch Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 46 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrRepIDMismatchRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Egress RSP Replication
|
|
ID Mismatch Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 47 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Egress RSP Replication ID Mismatch
|
|
Resets Health Indication. A zero count would
|
|
indicate a Health Status of Green and a non-zero
|
|
count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 48 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrRepIDMismatchStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane Egress RSP Replication ID Mismatch
|
|
Resets Health Indication. A zero count would
|
|
indicate a Health Status of Green and a non-zero
|
|
count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 49 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrRepIDMismatchStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane Egress RSP Replication ID Mismatch
|
|
Resets Health Indication. A zero count would
|
|
indicate a Health Status of Green and a non-zero
|
|
count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 50 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Egress RSP No Beep-Beep Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 51 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrNoBeepBeepRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Egress RSP No Beep-Beep Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 52 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrNoBeepBeepRstCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Egress RSP No Beep-Beep Resets."
|
|
::= { rcKhiForwardingAsicHealthEntry 53 }
|
|
|
|
rcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Egress RSP No Beep-Beep
|
|
Resets Health Indication. A zero count would
|
|
indicate a Health Status of Green and a non-zero
|
|
count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 54 }
|
|
|
|
rcKhiForwardingAsicHealthMidLnEgrNoBeepBeepStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane Egress RSP No Beep-Beep
|
|
Resets Health Indication. A zero count would
|
|
indicate a Health Status of Green and a non-zero
|
|
count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 55 }
|
|
|
|
rcKhiForwardingAsicHealthRightLnEgrNoBeepBeepStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane Egress RSP No Beep-Beep
|
|
Resets Health Indication. A zero count would
|
|
indicate a Health Status of Green and a non-zero
|
|
count would indicate a Red."
|
|
::= { rcKhiForwardingAsicHealthEntry 56 }
|
|
|
|
|
|
-- DFO FORWARDING KHI Ingress/Egress RSP State
|
|
|
|
rcKhiForwardingRSPStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRSPStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Key Health Indicator MIB - RSP Stats."
|
|
::= { rcKhiForwarding 2 }
|
|
|
|
rcKhiForwardingRSPStateEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRSPStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding KHI - RSP State table entry."
|
|
INDEX { rcKhiForwardingRSPStateSlotNumber,
|
|
rcKhiForwardingRSPStateDirection }
|
|
::= { rcKhiForwardingRSPStateTable 1 }
|
|
|
|
RcKhiForwardingRSPStateEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiForwardingRSPStateSlotNumber INTEGER,
|
|
rcKhiForwardingRSPStateDirection INTEGER,
|
|
rcKhiForwardingRSPStateLeftLnErrMask BITS,
|
|
rcKhiForwardingRSPStateMidLnErrMask BITS,
|
|
rcKhiForwardingRSPStateRightLnErrMask BITS,
|
|
rcKhiForwardingRSPStateLeftLnHealthStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStateMidLnHealthStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStateRightLnHealthStatus KhiStatusValue
|
|
}
|
|
|
|
rcKhiForwardingRSPStateSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number."
|
|
::= { rcKhiForwardingRSPStateEntry 1 }
|
|
|
|
rcKhiForwardingRSPStateDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ingress(1),
|
|
egress(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Direction - Ingress or Egress."
|
|
::= { rcKhiForwardingRSPStateEntry 2 }
|
|
|
|
rcKhiForwardingRSPStateLeftLnErrMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
cifParityError(0),
|
|
cifProtocolError(1),
|
|
eme0ParityError(2),
|
|
eme1ParityError(3),
|
|
bapHostReadError(4),
|
|
bapHostWriteError(5),
|
|
bapClockPLLNotLocked(6),
|
|
bapTxClockPLLNotLocked(7),
|
|
bapMemoryClockPLLNotLocked(8),
|
|
gabError(9),
|
|
bapIntfTimeout(10),
|
|
bapIntfError(11),
|
|
bapDecoderError(12),
|
|
bapDecoderSpecialAccessError(13),
|
|
bapControllerWriteError(14),
|
|
bapControllerReadError(15),
|
|
bapGABError(16),
|
|
ime0Disabled(17),
|
|
ime1Disabled(18),
|
|
hashEngineDisabled(19),
|
|
multiplicationEngineDisabled(20),
|
|
fdibEmptyPktWrongPTMAccess(21),
|
|
fdibPastEndOfPktError(22),
|
|
fdibFifoEmptyWrongPMAccess(23),
|
|
fdibInvalidPage(24),
|
|
fifoFull(25),
|
|
fdibMixedAccess(26),
|
|
fdobPMError(27),
|
|
fdobIsFull(28),
|
|
fdobIsEmpty(29),
|
|
ptmBusError(30),
|
|
pmProgramCounterError(31),
|
|
pmStatsBUSError(32),
|
|
pmFDIBHPIBUSError(33),
|
|
pmEME1ParityError(34),
|
|
pmEME0ParityError(35),
|
|
pmMulticastError(36),
|
|
pmFrameError(37),
|
|
pmPopRollover(38),
|
|
pmReleaseError(39),
|
|
amUnsupportedOptypeForRegionOrDeviceException(40),
|
|
amIllegalRegionOrSubregionException(41),
|
|
amSearchRunOnException(42),
|
|
amSearchBusErrorException(43),
|
|
amParityErrorException(44),
|
|
amProtocolErrorException(45),
|
|
amIllegalArgumentException(46),
|
|
amNonAllignedAddressException(47),
|
|
amPacketMemoryBusErrorException(48),
|
|
amPacketHeaderAddressErrorException(49),
|
|
amLookupContinueZeroException(50),
|
|
amUnsupportedRSVD8Exception(51),
|
|
amUnsupportedRSVD10Exception(52),
|
|
amUnsupportedRSVD1Exception(53),
|
|
amUnsupportedRSVD2Exception(54),
|
|
amUnsupportedRSVD3Exception(55),
|
|
amUnsupportedRSVD4Exception(56),
|
|
amUnsupportedRSVD5Exception(57),
|
|
amUnsupportedUnknownHWFailureException(58),
|
|
amSoftwareInterrupt(59),
|
|
missingRSPHeartbeats(60)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP State Error Bit Mask. Each bit in the mask
|
|
represents a specific error.
|
|
Bit 0 - CIF Parity Error.
|
|
Bit 1 - CIF Protocol Error.
|
|
Bit 2 - EME0 Parity Error.
|
|
Bit 3 - EME1 Parity Error.
|
|
Bit 4 - BAP Host Read Error.
|
|
Bit 5 - BAP Host Write Error.
|
|
Bit 6 - BAP Clock PLL is not locked.
|
|
Bit 7 - BAP Tx Clock PLL is not locked.
|
|
Bit 8 - BAP Memory Clock PLL is not locked.
|
|
Bit 9 - GAB Error.
|
|
Bit 10 - BAP Intf Timeout.
|
|
Bit 11 - BAP Intf Error.
|
|
Bit 12 - BAP Decoder Error.
|
|
Bit 13 - BAP Decoder Special Access Error.
|
|
Bit 14 - BAP Controller Write Error.
|
|
Bit 15 - BAP Controller Read Error.
|
|
Bit 16 - BAP GAB Error.
|
|
Bit 17 - IME0 is disabled.
|
|
Bit 18 - IME1 is disabled.
|
|
Bit 19 - Hash engine is disabled.
|
|
Bit 20 - Multiplication Engine is disabled.
|
|
Bit 21 - FDIB Empty Pkt. Wrong PTM access.
|
|
Bit 22 - FDIB Past End of Pkt Error.
|
|
Bit 23 - FDIB Fifo empty. Wrong PM access.
|
|
Bit 24 - FDIB Invalid Page.
|
|
Bit 25 - Fifo Full.
|
|
Bit 26 - FDIB Mixed access.
|
|
Bit 27 - FDOB PM Error.
|
|
Bit 28 - FDOB is Full.
|
|
Bit 29 - FDOB is empty.
|
|
Bit 30 - PTM Bus Error.
|
|
Bit 31 - PM Program Counter Error.
|
|
Bit 32 - PM Stats BUS Error.
|
|
Bit 33 - PM FDIB HPI BUS Error.
|
|
Bit 34 - PM EME1 Parity Error.
|
|
Bit 35 - PM EME0 Parity Error.
|
|
Bit 36 - PM Multicast Error.
|
|
Bit 37 - PM Frame Error.
|
|
Bit 38 - PM Pop rollover.
|
|
Bit 39 - PM Release Error.
|
|
Bit 40 - AM Unsupported optype for region/device exception.
|
|
Bit 41 - AM Illegal region/subregion exception.
|
|
Bit 42 - AM Search run on exception.
|
|
Bit 43 - AM Search bus error exception.
|
|
Bit 44 - AM Parity error exception.
|
|
Bit 45 - AM Protocol error exception.
|
|
Bit 46 - AM Illegal Argument exception.
|
|
Bit 47 - AM Non-alligned address exception.
|
|
Bit 48 - AM Packet memory bus error exception.
|
|
Bit 49 - AM Packet header address error exception.
|
|
Bit 50 - AM Lookup Continue Zero exception.
|
|
Bit 51 - AM Unsupported RSVD8 exception.
|
|
Bit 52 - AM Unsupported RSVD10 exception.
|
|
Bit 53 - AM Unsupported RSVD1 exception.
|
|
Bit 54 - AM Unsupported RSVD2 exception.
|
|
Bit 55 - AM Unsupported RSVD3 exception.
|
|
Bit 56 - AM Unsupported RSVD4 exception.
|
|
Bit 57 - AM Unsupported RSVD5 exception.
|
|
Bit 58 - AM Unsupported Unknown h/w failure exception.
|
|
Bit 59 - AM Software Interrupt.
|
|
Bit 60 - Missing RSP Heartbeats."
|
|
::= { rcKhiForwardingRSPStateEntry 3 }
|
|
|
|
rcKhiForwardingRSPStateMidLnErrMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
cifParityError(0),
|
|
cifProtocolError(1),
|
|
eme0ParityError(2),
|
|
eme1ParityError(3),
|
|
bapHostReadError(4),
|
|
bapHostWriteError(5),
|
|
bapClockPLLNotLocked(6),
|
|
bapTxClockPLLNotLocked(7),
|
|
bapMemoryClockPLLNotLocked(8),
|
|
gabError(9),
|
|
bapIntfTimeout(10),
|
|
bapIntfError(11),
|
|
bapDecoderError(12),
|
|
bapDecoderSpecialAccessError(13),
|
|
bapControllerWriteError(14),
|
|
bapControllerReadError(15),
|
|
bapGABError(16),
|
|
ime0Disabled(17),
|
|
ime1Disabled(18),
|
|
hashEngineDisabled(19),
|
|
multiplicationEngineDisabled(20),
|
|
fdibEmptyPktWrongPTMAccess(21),
|
|
fdibPastEndOfPktError(22),
|
|
fdibFifoEmptyWrongPMAccess(23),
|
|
fdibInvalidPage(24),
|
|
fifoFull(25),
|
|
fdibMixedAccess(26),
|
|
fdobPMError(27),
|
|
fdobIsFull(28),
|
|
fdobIsEmpty(29),
|
|
ptmBusError(30),
|
|
pmProgramCounterError(31),
|
|
pmStatsBUSError(32),
|
|
pmFDIBHPIBUSError(33),
|
|
pmEME1ParityError(34),
|
|
pmEME0ParityError(35),
|
|
pmMulticastError(36),
|
|
pmFrameError(37),
|
|
pmPopRollover(38),
|
|
pmReleaseError(39),
|
|
amUnsupportedOptypeForRegionOrDeviceException(40),
|
|
amIllegalRegionOrSubregionException(41),
|
|
amSearchRunOnException(42),
|
|
amSearchBusErrorException(43),
|
|
amParityErrorException(44),
|
|
amProtocolErrorException(45),
|
|
amIllegalArgumentException(46),
|
|
amNonAllignedAddressException(47),
|
|
amPacketMemoryBusErrorException(48),
|
|
amPacketHeaderAddressErrorException(49),
|
|
amLookupContinueZeroException(50),
|
|
amUnsupportedRSVD8Exception(51),
|
|
amUnsupportedRSVD10Exception(52),
|
|
amUnsupportedRSVD1Exception(53),
|
|
amUnsupportedRSVD2Exception(54),
|
|
amUnsupportedRSVD3Exception(55),
|
|
amUnsupportedRSVD4Exception(56),
|
|
amUnsupportedRSVD5Exception(57),
|
|
amUnsupportedUnknownHWFailureException(58),
|
|
amSoftwareInterrupt(59),
|
|
missingRSPHeartbeats(60)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP State Error Bit Mask. Each bit in the mask
|
|
represents a specific error.
|
|
Bit 0 - CIF Parity Error.
|
|
Bit 1 - CIF Protocol Error.
|
|
Bit 2 - EME0 Parity Error.
|
|
Bit 3 - EME1 Parity Error.
|
|
Bit 4 - BAP Host Read Error.
|
|
Bit 5 - BAP Host Write Error.
|
|
Bit 6 - BAP Clock PLL is not locked.
|
|
Bit 7 - BAP Tx Clock PLL is not locked.
|
|
Bit 8 - BAP Memory Clock PLL is not locked.
|
|
Bit 9 - GAB Error.
|
|
Bit 10 - BAP Intf Timeout.
|
|
Bit 11 - BAP Intf Error.
|
|
Bit 12 - BAP Decoder Error.
|
|
Bit 13 - BAP Decoder Special Access Error.
|
|
Bit 14 - BAP Controller Write Error.
|
|
Bit 15 - BAP Controller Read Error.
|
|
Bit 16 - BAP GAB Error.
|
|
Bit 17 - IME0 is disabled.
|
|
Bit 18 - IME1 is disabled.
|
|
Bit 19 - Hash engine is disabled.
|
|
Bit 20 - Multiplication Engine is disabled.
|
|
Bit 21 - FDIB Empty Pkt. Wrong PTM access.
|
|
Bit 22 - FDIB Past End of Pkt Error.
|
|
Bit 23 - FDIB Fifo empty. Wrong PM access.
|
|
Bit 24 - FDIB Invalid Page.
|
|
Bit 25 - Fifo Full.
|
|
Bit 26 - FDIB Mixed access.
|
|
Bit 27 - FDOB PM Error.
|
|
Bit 28 - FDOB is Full.
|
|
Bit 29 - FDOB is empty.
|
|
Bit 30 - PTM Bus Error.
|
|
Bit 31 - PM Program Counter Error.
|
|
Bit 32 - PM Stats BUS Error.
|
|
Bit 33 - PM FDIB HPI BUS Error.
|
|
Bit 34 - PM EME1 Parity Error.
|
|
Bit 35 - PM EME0 Parity Error.
|
|
Bit 36 - PM Multicast Error.
|
|
Bit 37 - PM Frame Error.
|
|
Bit 38 - PM Pop rollover.
|
|
Bit 39 - PM Release Error.
|
|
Bit 40 - AM Unsupported optype for region/device exception.
|
|
Bit 41 - AM Illegal region/subregion exception.
|
|
Bit 42 - AM Search run on exception.
|
|
Bit 43 - AM Search bus error exception.
|
|
Bit 44 - AM Parity error exception.
|
|
Bit 45 - AM Protocol error exception.
|
|
Bit 46 - AM Illegal Argument exception.
|
|
Bit 47 - AM Non-alligned address exception.
|
|
Bit 48 - AM Packet memory bus error exception.
|
|
Bit 49 - AM Packet header address error exception.
|
|
Bit 50 - AM Lookup Continue Zero exception.
|
|
Bit 51 - AM Unsupported RSVD8 exception.
|
|
Bit 52 - AM Unsupported RSVD10 exception.
|
|
Bit 53 - AM Unsupported RSVD1 exception.
|
|
Bit 54 - AM Unsupported RSVD2 exception.
|
|
Bit 55 - AM Unsupported RSVD3 exception.
|
|
Bit 56 - AM Unsupported RSVD4 exception.
|
|
Bit 57 - AM Unsupported RSVD5 exception.
|
|
Bit 58 - AM Unsupported Unknown h/w failure exception.
|
|
Bit 59 - AM Software Interrupt.
|
|
Bit 60 - Missing RSP Heartbeats."
|
|
::= { rcKhiForwardingRSPStateEntry 4 }
|
|
|
|
rcKhiForwardingRSPStateRightLnErrMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
cifParityError(0),
|
|
cifProtocolError(1),
|
|
eme0ParityError(2),
|
|
eme1ParityError(3),
|
|
bapHostReadError(4),
|
|
bapHostWriteError(5),
|
|
bapClockPLLNotLocked(6),
|
|
bapTxClockPLLNotLocked(7),
|
|
bapMemoryClockPLLNotLocked(8),
|
|
gabError(9),
|
|
bapIntfTimeout(10),
|
|
bapIntfError(11),
|
|
bapDecoderError(12),
|
|
bapDecoderSpecialAccessError(13),
|
|
bapControllerWriteError(14),
|
|
bapControllerReadError(15),
|
|
bapGABError(16),
|
|
ime0Disabled(17),
|
|
ime1Disabled(18),
|
|
hashEngineDisabled(19),
|
|
multiplicationEngineDisabled(20),
|
|
fdibEmptyPktWrongPTMAccess(21),
|
|
fdibPastEndOfPktError(22),
|
|
fdibFifoEmptyWrongPMAccess(23),
|
|
fdibInvalidPage(24),
|
|
fifoFull(25),
|
|
fdibMixedAccess(26),
|
|
fdobPMError(27),
|
|
fdobIsFull(28),
|
|
fdobIsEmpty(29),
|
|
ptmBusError(30),
|
|
pmProgramCounterError(31),
|
|
pmStatsBUSError(32),
|
|
pmFDIBHPIBUSError(33),
|
|
pmEME1ParityError(34),
|
|
pmEME0ParityError(35),
|
|
pmMulticastError(36),
|
|
pmFrameError(37),
|
|
pmPopRollover(38),
|
|
pmReleaseError(39),
|
|
amUnsupportedOptypeForRegionOrDeviceException(40),
|
|
amIllegalRegionOrSubregionException(41),
|
|
amSearchRunOnException(42),
|
|
amSearchBusErrorException(43),
|
|
amParityErrorException(44),
|
|
amProtocolErrorException(45),
|
|
amIllegalArgumentException(46),
|
|
amNonAllignedAddressException(47),
|
|
amPacketMemoryBusErrorException(48),
|
|
amPacketHeaderAddressErrorException(49),
|
|
amLookupContinueZeroException(50),
|
|
amUnsupportedRSVD8Exception(51),
|
|
amUnsupportedRSVD10Exception(52),
|
|
amUnsupportedRSVD1Exception(53),
|
|
amUnsupportedRSVD2Exception(54),
|
|
amUnsupportedRSVD3Exception(55),
|
|
amUnsupportedRSVD4Exception(56),
|
|
amUnsupportedRSVD5Exception(57),
|
|
amUnsupportedUnknownHWFailureException(58),
|
|
amSoftwareInterrupt(59),
|
|
missingRSPHeartbeats(60)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP State Error Bit Mask. Each bit in the mask
|
|
represents a specific error.
|
|
Bit 0 - CIF Parity Error.
|
|
Bit 1 - CIF Protocol Error.
|
|
Bit 2 - EME0 Parity Error.
|
|
Bit 3 - EME1 Parity Error.
|
|
Bit 4 - BAP Host Read Error.
|
|
Bit 5 - BAP Host Write Error.
|
|
Bit 6 - BAP Clock PLL is not locked.
|
|
Bit 7 - BAP Tx Clock PLL is not locked.
|
|
Bit 8 - BAP Memory Clock PLL is not locked.
|
|
Bit 9 - GAB Error.
|
|
Bit 10 - BAP Intf Timeout.
|
|
Bit 11 - BAP Intf Error.
|
|
Bit 12 - BAP Decoder Error.
|
|
Bit 13 - BAP Decoder Special Access Error.
|
|
Bit 14 - BAP Controller Write Error.
|
|
Bit 15 - BAP Controller Read Error.
|
|
Bit 16 - BAP GAB Error.
|
|
Bit 17 - IME0 is disabled.
|
|
Bit 18 - IME1 is disabled.
|
|
Bit 19 - Hash engine is disabled.
|
|
Bit 20 - Multiplication Engine is disabled.
|
|
Bit 21 - FDIB Empty Pkt. Wrong PTM access.
|
|
Bit 22 - FDIB Past End of Pkt Error.
|
|
Bit 23 - FDIB Fifo empty. Wrong PM access.
|
|
Bit 24 - FDIB Invalid Page.
|
|
Bit 25 - Fifo Full.
|
|
Bit 26 - FDIB Mixed access.
|
|
Bit 27 - FDOB PM Error.
|
|
Bit 28 - FDOB is Full.
|
|
Bit 29 - FDOB is empty.
|
|
Bit 30 - PTM Bus Error.
|
|
Bit 31 - PM Program Counter Error.
|
|
Bit 32 - PM Stats BUS Error.
|
|
Bit 33 - PM FDIB HPI BUS Error.
|
|
Bit 34 - PM EME1 Parity Error.
|
|
Bit 35 - PM EME0 Parity Error.
|
|
Bit 36 - PM Multicast Error.
|
|
Bit 37 - PM Frame Error.
|
|
Bit 38 - PM Pop rollover.
|
|
Bit 39 - PM Release Error.
|
|
Bit 40 - AM Unsupported optype for region/device exception.
|
|
Bit 41 - AM Illegal region/subregion exception.
|
|
Bit 42 - AM Search run on exception.
|
|
Bit 43 - AM Search bus error exception.
|
|
Bit 44 - AM Parity error exception.
|
|
Bit 45 - AM Protocol error exception.
|
|
Bit 46 - AM Illegal Argument exception.
|
|
Bit 47 - AM Non-alligned address exception.
|
|
Bit 48 - AM Packet memory bus error exception.
|
|
Bit 49 - AM Packet header address error exception.
|
|
Bit 50 - AM Lookup Continue Zero exception.
|
|
Bit 51 - AM Unsupported RSVD8 exception.
|
|
Bit 52 - AM Unsupported RSVD10 exception.
|
|
Bit 53 - AM Unsupported RSVD1 exception.
|
|
Bit 54 - AM Unsupported RSVD2 exception.
|
|
Bit 55 - AM Unsupported RSVD3 exception.
|
|
Bit 56 - AM Unsupported RSVD4 exception.
|
|
Bit 57 - AM Unsupported RSVD5 exception.
|
|
Bit 58 - AM Unsupported Unknown h/w failure exception.
|
|
Bit 59 - AM Software Interrupt.
|
|
Bit 60 - Missing RSP Heartbeats."
|
|
::= { rcKhiForwardingRSPStateEntry 5 }
|
|
|
|
rcKhiForwardingRSPStateLeftLnHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Left Lane RSP-State Health as Green/Yellow/Red.
|
|
If multiple events with different health status occurs at the
|
|
same time, the highest health status of all the events is reported."
|
|
::= { rcKhiForwardingRSPStateEntry 6 }
|
|
|
|
rcKhiForwardingRSPStateMidLnHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Middle Lane RSP-State Health as Green/Yellow/Red.
|
|
If multiple events with different health status occurs at the same
|
|
time, the highest health status of all the events is reported."
|
|
::= { rcKhiForwardingRSPStateEntry 7 }
|
|
|
|
rcKhiForwardingRSPStateRightLnHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Right Lane RSP-State Health as Green/Yellow/Red.
|
|
If multiple events with different health status occurs at the same
|
|
time, the highest health status of all the events is reported."
|
|
::= { rcKhiForwardingRSPStateEntry 8 }
|
|
|
|
|
|
-- DFO FORWARDING KHI Ingress/Egress RSP Stats
|
|
|
|
rcKhiForwardingRSPStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRSPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Key Health Indicator MIB - RSP Stats."
|
|
::= { rcKhiForwarding 3 }
|
|
|
|
rcKhiForwardingRSPStatsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRSPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding KHI - RSP Stats table entry."
|
|
INDEX { rcKhiForwardingRSPStatsSlotNumber,
|
|
rcKhiForwardingRSPStatsDirection }
|
|
::= { rcKhiForwardingRSPStatsTable 1 }
|
|
|
|
RcKhiForwardingRSPStatsEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiForwardingRSPStatsSlotNumber INTEGER,
|
|
rcKhiForwardingRSPStatsDirection INTEGER,
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMPkts Counter64,
|
|
rcKhiForwardingRSPStatsMidLnTotalAMPkts Counter64,
|
|
rcKhiForwardingRSPStatsRightLnTotalAMPkts Counter64,
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMRxErrPkts Counter64,
|
|
rcKhiForwardingRSPStatsMidLnTotalAMRxErrPkts Counter64,
|
|
rcKhiForwardingRSPStatsRightLnTotalAMRxErrPkts Counter64,
|
|
rcKhiForwardingRSPStatsLeftLnAMRxErrPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsMidLnAMRxErrPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsRightLnAMRxErrPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMShortPkts Counter64,
|
|
rcKhiForwardingRSPStatsMidLnTotalAMShortPkts Counter64,
|
|
rcKhiForwardingRSPStatsRightLnTotalAMShortPkts Counter64,
|
|
rcKhiForwardingRSPStatsLeftLnAMShortPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsMidLnAMShortPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsRightLnAMShortPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMCongestionDrops Counter64,
|
|
rcKhiForwardingRSPStatsMidLnTotalAMCongestionDrops Counter64,
|
|
rcKhiForwardingRSPStatsRightLnTotalAMCongestionDrops Counter64,
|
|
rcKhiForwardingRSPStatsLeftLnAMCongestionDropStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsMidLnAMCongestionDropStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsRightLnAMCongestionDropStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMProcErrPkts Counter64,
|
|
rcKhiForwardingRSPStatsMidLnTotalAMProcErrPkts Counter64,
|
|
rcKhiForwardingRSPStatsRightLnTotalAMProcErrPkts Counter64,
|
|
rcKhiForwardingRSPStatsLeftLnAMProcErrPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsMidLnAMProcErrPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsRightLnAMProcErrPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMExpPkts Counter64,
|
|
rcKhiForwardingRSPStatsMidLnTotalAMExpPkts Counter64,
|
|
rcKhiForwardingRSPStatsRightLnTotalAMExpPkts Counter64,
|
|
rcKhiForwardingRSPStatsLeftLnAMExpPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsMidLnAMExpPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsRightLnAMExpPktsStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsLeftLnTotalPMFwdPkts Counter64,
|
|
rcKhiForwardingRSPStatsMidLnTotalPMFwdPkts Counter64,
|
|
rcKhiForwardingRSPStatsRightLnTotalPMFwdPkts Counter64,
|
|
rcKhiForwardingRSPStatsLeftLnTotalPMDropErrPkts Counter64,
|
|
rcKhiForwardingRSPStatsMidLnTotalPMDropErrPkts Counter64,
|
|
rcKhiForwardingRSPStatsRightLnTotalPMDropErrPkts Counter64,
|
|
rcKhiForwardingRSPStatsLeftLnPMDropErrStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsMidLnPMDropErrStatus KhiStatusValue,
|
|
rcKhiForwardingRSPStatsRightLnPMDropErrStatus KhiStatusValue
|
|
}
|
|
|
|
rcKhiForwardingRSPStatsSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number."
|
|
::= { rcKhiForwardingRSPStatsEntry 1 }
|
|
|
|
rcKhiForwardingRSPStatsDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ingress(1),
|
|
egress(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Direction - Ingress or Egress."
|
|
::= { rcKhiForwardingRSPStatsEntry 2 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Packets."
|
|
::= { rcKhiForwardingRSPStatsEntry 3 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnTotalAMPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Packets."
|
|
::= { rcKhiForwardingRSPStatsEntry 4 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnTotalAMPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Packets."
|
|
::= { rcKhiForwardingRSPStatsEntry 5 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMRxErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Rx Error Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 6 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnTotalAMRxErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Rx Error Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 7 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnTotalAMRxErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Rx Error Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 8 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnAMRxErrPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Rx Error Packets Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Red."
|
|
::= { rcKhiForwardingRSPStatsEntry 9 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnAMRxErrPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Rx Error Packets Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Red."
|
|
::= { rcKhiForwardingRSPStatsEntry 10 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnAMRxErrPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Rx Error Packets Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Red."
|
|
::= { rcKhiForwardingRSPStatsEntry 11 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMShortPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Short Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 12 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnTotalAMShortPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Short Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 13 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnTotalAMShortPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Short Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 14 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnAMShortPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Short Packets Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Red."
|
|
::= { rcKhiForwardingRSPStatsEntry 15 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnAMShortPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Short Packets Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Red."
|
|
::= { rcKhiForwardingRSPStatsEntry 16 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnAMShortPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Short Packets Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Red."
|
|
::= { rcKhiForwardingRSPStatsEntry 17 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMCongestionDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Congestion Drop Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 18 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnTotalAMCongestionDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Congestion Drop Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 19 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnTotalAMCongestionDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Congestion Drop Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 20 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnAMCongestionDropStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Congestion Drop Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 21 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnAMCongestionDropStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Congestion Drop Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 22 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnAMCongestionDropStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Congestion Drop Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 23 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMProcErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Proc Error Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 24 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnTotalAMProcErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Proc Error Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 25 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnTotalAMProcErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Proc Error Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 26 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnAMProcErrPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Proc Error Packets Health Status.
|
|
A zero count would indicate a Health Status of Green and
|
|
a non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 27 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnAMProcErrPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Proc Error Packets Health Status.
|
|
A zero count would indicate a Health Status of Green and
|
|
a non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 28 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnAMProcErrPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Proc Error Packets Health Status.
|
|
A zero count would indicate a Health Status of Green and
|
|
a non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 29 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnTotalAMExpPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Exp Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 30 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnTotalAMExpPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Exp Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 31 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnTotalAMExpPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Exp Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 32 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnAMExpPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total AM Exp Packets Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 33 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnAMExpPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total AM Exp Packets Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 34 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnAMExpPktsStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total AM Exp Packets Health Status.
|
|
A zero count would indicate a Health Status of Green
|
|
and a non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 35 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnTotalPMFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total PM Forwarded Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 36 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnTotalPMFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total PM Forwarded Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 37 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnTotalPMFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total PM Forwarded Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 38 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnTotalPMDropErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total PM Dropped Error Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 39 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnTotalPMDropErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total PM Dropped Error Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 40 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnTotalPMDropErrPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total PM Dropped Error Packets Count."
|
|
::= { rcKhiForwardingRSPStatsEntry 41 }
|
|
|
|
rcKhiForwardingRSPStatsLeftLnPMDropErrStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane RSP Total PM Dropped Error Packets Health Status.
|
|
A zero count would indicate a Health Status of Green and a
|
|
non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 42 }
|
|
|
|
rcKhiForwardingRSPStatsMidLnPMDropErrStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane RSP Total PM Dropped Error Packets Health Status.
|
|
A zero count would indicate a Health Status of Green and a
|
|
non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 43 }
|
|
|
|
rcKhiForwardingRSPStatsRightLnPMDropErrStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane RSP Total PM Dropped Error Packets Health Status.
|
|
A zero count would indicate a Health Status of Green and a
|
|
non-zero count would indicate a Yellow."
|
|
::= { rcKhiForwardingRSPStatsEntry 44 }
|
|
|
|
|
|
-- DFO FORWARDING KHI F2X Health
|
|
|
|
rcKhiForwardingF2XHealthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingF2XHealthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Key Health Indicator MIB - F2X (F2I and F2E) Health."
|
|
::= { rcKhiForwarding 4 }
|
|
|
|
rcKhiForwardingF2XHealthEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingF2XHealthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding KHI - F2X Health table entry."
|
|
INDEX { rcKhiForwardingF2XHealthSlotNumber }
|
|
::= { rcKhiForwardingF2XHealthTable 1 }
|
|
|
|
RcKhiForwardingF2XHealthEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiForwardingF2XHealthSlotNumber INTEGER,
|
|
rcKhiForwardingF2XHealthLeftLnErrMask BITS,
|
|
rcKhiForwardingF2XHealthMidLnErrMask BITS,
|
|
rcKhiForwardingF2XHealthRightLnErrMask BITS,
|
|
rcKhiForwardingF2XHealthLeftLnHealthStatus KhiStatusValue,
|
|
rcKhiForwardingF2XHealthMidLnHealthStatus KhiStatusValue,
|
|
rcKhiForwardingF2XHealthRightLnHealthStatus KhiStatusValue
|
|
}
|
|
|
|
rcKhiForwardingF2XHealthSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number."
|
|
::= { rcKhiForwardingF2XHealthEntry 1 }
|
|
|
|
rcKhiForwardingF2XHealthLeftLnErrMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
policeDrops(0),
|
|
foqDrops(1),
|
|
fabricDrops(2),
|
|
legacyDrops(3),
|
|
f2eCombinedPktMemoryThresholdExceeded(4),
|
|
f2eHABMasterFIFOParityErr(5),
|
|
f2eEgressSPI42SyncErr(6),
|
|
f2eLoopSPI42SyncErr(7),
|
|
f2eCIFIllegalOperation(8),
|
|
f2eCIFProtocolErr(9),
|
|
f2eCIFErroredData(10),
|
|
f2eCIFIllegalAddress(11),
|
|
f2eCIFReadErrInTargetData(12),
|
|
f2eEgressQueueDrops(13),
|
|
f2iIngressSPI42ProtocolErr(14),
|
|
f2iIngressSPI42OverflowErr(15),
|
|
f2iIngressSPI42AbortReceived(16),
|
|
f2iIngressSPI42DataDIP4ErrDetected(17),
|
|
f2iIngressSPI42SyncErr(18),
|
|
f2iLoopSPI42ProtocolErr(19),
|
|
f2iLoopSPI42OverflowErr(20),
|
|
f2iLoopSPI42AbortReceived(21),
|
|
f2iLoopSPI42DataDIP4ErrDetected(22),
|
|
f2iLoopSPI42SyncErr(23),
|
|
f2iHABSlaveFIFOParityErr(24),
|
|
f2iHABSlaveFIFOOverflow(25),
|
|
f2iHABSlaveDataParityErr(26),
|
|
f2iHABSlaveProtocolErr(27),
|
|
f2iHABSlaveDataErr(28),
|
|
f2iFOQMProtocolErr(29),
|
|
f2iFOQMOverflow(30),
|
|
f2ePacketParityErrDetected(31),
|
|
f2eParityErrInPktMemoryData(32),
|
|
f2eParityErrInPktMemoryControl(33),
|
|
f2ePktMemoryParityErr(34)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane F2X Health Bit Mask. Each bit in the mask represents
|
|
a specific F2X event. The following are the events -
|
|
Bit 0 - Police Drops. Indicates a Status of Yellow.
|
|
Bit 1 - FOQ Drops. Indicates a Status of Yellow.
|
|
Bit 2 - Fabric Drops. Indicates a Status of Yellow.
|
|
Bit 3 - Legacy Drops. Indicates a Status of Yellow.
|
|
Bit 4 - F2E Combined Packet Memory Threshold Exceeded. Indicates a Status of Yellow.
|
|
Bit 5 - F2E HAB Master - FIFO Parity Error. Indicates a Status of Yellow.
|
|
Bit 6 - F2E Egress SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 7 - F2E Loop SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 8 - F2E CIF Illegal Operation. Indicates a Status of Yellow.
|
|
Bit 9 - F2E CIF Protocol Error. Indicates a Status of Yellow.
|
|
Bit 10 - F2E CIF Errored Data. Indicates a Status of Yellow.
|
|
Bit 11 - F2E CIF Illegal Address. Indicates a Status of Yellow.
|
|
Bit 12 - F2E CIF Read Error in Target Data. Indicates a Status of Yellow.
|
|
Bit 13 - F2E Egress Queue Drops. Indicates a Status of Red.
|
|
Bit 14 - F2I Ingress SPI-4.2 Protocol Error. Indicates a Status of Yellow.
|
|
Bit 15 - F2I Ingress SPI-4.2 Overflow Error. Indicates a Status of Red.
|
|
Bit 16 - F2I Ingress SPI-4.2 Abort Received. Indicates a Status of Yellow.
|
|
Bit 17 - F2I Ingress SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow.
|
|
Bit 18 - F2I Ingress SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 19 - F2I Loop SPI-4.2 Protocol Error. Indicates a Status of Yellow.
|
|
Bit 20 - F2I Loop SPI-4.2 Overflow Error. Indicates a Status of Yellow.
|
|
Bit 21 - F2I Loop SPI-4.2 Abort Received. Indicates a Status of Yellow.
|
|
Bit 22 - F2I Loop SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow.
|
|
Bit 23 - F2I Loop SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 24 - F2I HAB Slave FIFO Parity Error. Indicates a Status of Yellow.
|
|
Bit 25 - F2I HAB Slave FIFO Overflow. Indicates a Status of Red.
|
|
Bit 26 - F2I HAB Slave Data Parity Error. Indicates a Status of Yellow.
|
|
Bit 27 - F2I HAB Slave Protocol Error. Indicates a Status of Yellow.
|
|
Bit 28 - F2I HAB Slave Data Error. Indicates a Status of Yellow.
|
|
Bit 29 - F2I FOQM Protocol Error. Indicates a Status of Red.
|
|
Bit 30 - F2I FOQM Overflow. Indicates a Status of Red.
|
|
Bit 31 - F2E Packet Parity Error. Indicates a status of Red.
|
|
Bit 32 - F2E Parity Error in Packet Memory Data (QDR). Indicates a status of Red.
|
|
Bit 33 - F2E Parity Error in Packet Memory Control (QDR). Indicates a status of Red.
|
|
Bit 34 - F2E Packet Memory Parity Error (QDR). Indicates a status of Red."
|
|
::= { rcKhiForwardingF2XHealthEntry 2 }
|
|
|
|
rcKhiForwardingF2XHealthMidLnErrMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
policeDrops(0),
|
|
foqDrops(1),
|
|
fabricDrops(2),
|
|
legacyDrops(3),
|
|
f2eCombinedPktMemoryThresholdExceeded(4),
|
|
f2eHABMasterFIFOParityErr(5),
|
|
f2eEgressSPI42SyncErr(6),
|
|
f2eLoopSPI42SyncErr(7),
|
|
f2eCIFIllegalOperation(8),
|
|
f2eCIFProtocolErr(9),
|
|
f2eCIFErroredData(10),
|
|
f2eCIFIllegalAddress(11),
|
|
f2eCIFReadErrInTargetData(12),
|
|
f2eEgressQueueDrops(13),
|
|
f2iIngressSPI42ProtocolErr(14),
|
|
f2iIngressSPI42OverflowErr(15),
|
|
f2iIngressSPI42AbortReceived(16),
|
|
f2iIngressSPI42DataDIP4ErrDetected(17),
|
|
f2iIngressSPI42SyncErr(18),
|
|
f2iLoopSPI42ProtocolErr(19),
|
|
f2iLoopSPI42OverflowErr(20),
|
|
f2iLoopSPI42AbortReceived(21),
|
|
f2iLoopSPI42DataDIP4ErrDetected(22),
|
|
f2iLoopSPI42SyncErr(23),
|
|
f2iHABSlaveFIFOParityErr(24),
|
|
f2iHABSlaveFIFOOverflow(25),
|
|
f2iHABSlaveDataParityErr(26),
|
|
f2iHABSlaveProtocolErr(27),
|
|
f2iHABSlaveDataErr(28),
|
|
f2iFOQMProtocolErr(29),
|
|
f2iFOQMOverflow(30),
|
|
f2ePacketParityErrDetected(31),
|
|
f2eParityErrInPktMemoryData(32),
|
|
f2eParityErrInPktMemoryControl(33),
|
|
f2ePktMemoryParityErr(34)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane F2X Health Bit Mask. Each bit in the mask represents
|
|
a specific F2X event. The following are the events -
|
|
Bit 0 - Police Drops. Indicates a Status of Yellow.
|
|
Bit 1 - FOQ Drops. Indicates a Status of Yellow.
|
|
Bit 2 - Fabric Drops. Indicates a Status of Yellow.
|
|
Bit 3 - Legacy Drops. Indicates a Status of Yellow.
|
|
Bit 4 - F2E Combined Packet Memory Threshold Exceeded. Indicates a Status of Yellow.
|
|
Bit 5 - F2E HAB Master - FIFO Parity Error. Indicates a Status of Yellow.
|
|
Bit 6 - F2E Egress SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 7 - F2E Loop SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 8 - F2E CIF Illegal Operation. Indicates a Status of Yellow.
|
|
Bit 9 - F2E CIF Protocol Error. Indicates a Status of Yellow.
|
|
Bit 10 - F2E CIF Errored Data. Indicates a Status of Yellow.
|
|
Bit 11 - F2E CIF Illegal Address. Indicates a Status of Yellow.
|
|
Bit 12 - F2E CIF Read Error in Target Data. Indicates a Status of Yellow.
|
|
Bit 13 - F2E Egress Queue Drops. Indicates a Status of Red.
|
|
Bit 14 - F2I Ingress SPI-4.2 Protocol Error. Indicates a Status of Yellow.
|
|
Bit 15 - F2I Ingress SPI-4.2 Overflow Error. Indicates a Status of Red.
|
|
Bit 16 - F2I Ingress SPI-4.2 Abort Received. Indicates a Status of Yellow.
|
|
Bit 17 - F2I Ingress SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow.
|
|
Bit 18 - F2I Ingress SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 19 - F2I Loop SPI-4.2 Protocol Error. Indicates a Status of Yellow.
|
|
Bit 20 - F2I Loop SPI-4.2 Overflow Error. Indicates a Status of Yellow.
|
|
Bit 21 - F2I Loop SPI-4.2 Abort Received. Indicates a Status of Yellow.
|
|
Bit 22 - F2I Loop SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow.
|
|
Bit 23 - F2I Loop SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 24 - F2I HAB Slave FIFO Parity Error. Indicates a Status of Yellow.
|
|
Bit 25 - F2I HAB Slave FIFO Overflow. Indicates a Status of Red.
|
|
Bit 26 - F2I HAB Slave Data Parity Error. Indicates a Status of Yellow.
|
|
Bit 27 - F2I HAB Slave Protocol Error. Indicates a Status of Yellow.
|
|
Bit 28 - F2I HAB Slave Data Error. Indicates a Status of Yellow.
|
|
Bit 29 - F2I FOQM Protocol Error. Indicates a Status of Red.
|
|
Bit 30 - F2I FOQM Overflow. Indicates a Status of Red.
|
|
Bit 31 - F2E Packet Parity Error. Indicates a status of Red.
|
|
Bit 32 - F2E Parity Error in Packet Memory Data (QDR). Indicates a status of Red.
|
|
Bit 33 - F2E Parity Error in Packet Memory Control (QDR). Indicates a status of Red.
|
|
Bit 34 - F2E Packet Memory Parity Error (QDR). Indicates a status of Red."
|
|
::= { rcKhiForwardingF2XHealthEntry 3 }
|
|
|
|
rcKhiForwardingF2XHealthRightLnErrMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
policeDrops(0),
|
|
foqDrops(1),
|
|
fabricDrops(2),
|
|
legacyDrops(3),
|
|
f2eCombinedPktMemoryThresholdExceeded(4),
|
|
f2eHABMasterFIFOParityErr(5),
|
|
f2eEgressSPI42SyncErr(6),
|
|
f2eLoopSPI42SyncErr(7),
|
|
f2eCIFIllegalOperation(8),
|
|
f2eCIFProtocolErr(9),
|
|
f2eCIFErroredData(10),
|
|
f2eCIFIllegalAddress(11),
|
|
f2eCIFReadErrInTargetData(12),
|
|
f2eEgressQueueDrops(13),
|
|
f2iIngressSPI42ProtocolErr(14),
|
|
f2iIngressSPI42OverflowErr(15),
|
|
f2iIngressSPI42AbortReceived(16),
|
|
f2iIngressSPI42DataDIP4ErrDetected(17),
|
|
f2iIngressSPI42SyncErr(18),
|
|
f2iLoopSPI42ProtocolErr(19),
|
|
f2iLoopSPI42OverflowErr(20),
|
|
f2iLoopSPI42AbortReceived(21),
|
|
f2iLoopSPI42DataDIP4ErrDetected(22),
|
|
f2iLoopSPI42SyncErr(23),
|
|
f2iHABSlaveFIFOParityErr(24),
|
|
f2iHABSlaveFIFOOverflow(25),
|
|
f2iHABSlaveDataParityErr(26),
|
|
f2iHABSlaveProtocolErr(27),
|
|
f2iHABSlaveDataErr(28),
|
|
f2iFOQMProtocolErr(29),
|
|
f2iFOQMOverflow(30),
|
|
f2ePacketParityErrDetected(31),
|
|
f2eParityErrInPktMemoryData(32),
|
|
f2eParityErrInPktMemoryControl(33),
|
|
f2ePktMemoryParityErr(34)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane F2X Health Bit Mask. Each bit in the mask
|
|
represents a specific F2X event. The following are the events -
|
|
Bit 0 - Police Drops. Indicates a Status of Yellow.
|
|
Bit 1 - FOQ Drops. Indicates a Status of Yellow.
|
|
Bit 2 - Fabric Drops. Indicates a Status of Yellow.
|
|
Bit 3 - Legacy Drops. Indicates a Status of Yellow.
|
|
Bit 4 - F2E Combined Packet Memory Threshold Exceeded. Indicates a Status of Yellow.
|
|
Bit 5 - F2E HAB Master - FIFO Parity Error. Indicates a Status of Yellow.
|
|
Bit 6 - F2E Egress SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 7 - F2E Loop SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 8 - F2E CIF Illegal Operation. Indicates a Status of Yellow.
|
|
Bit 9 - F2E CIF Protocol Error. Indicates a Status of Yellow.
|
|
Bit 10 - F2E CIF Errored Data. Indicates a Status of Yellow.
|
|
Bit 11 - F2E CIF Illegal Address. Indicates a Status of Yellow.
|
|
Bit 12 - F2E CIF Read Error in Target Data. Indicates a Status of Yellow.
|
|
Bit 13 - F2E Egress Queue Drops. Indicates a Status of Red.
|
|
Bit 14 - F2I Ingress SPI-4.2 Protocol Error. Indicates a Status of Yellow.
|
|
Bit 15 - F2I Ingress SPI-4.2 Overflow Error. Indicates a Status of Red.
|
|
Bit 16 - F2I Ingress SPI-4.2 Abort Received. Indicates a Status of Yellow.
|
|
Bit 17 - F2I Ingress SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow.
|
|
Bit 18 - F2I Ingress SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 19 - F2I Loop SPI-4.2 Protocol Error. Indicates a Status of Yellow.
|
|
Bit 20 - F2I Loop SPI-4.2 Overflow Error. Indicates a Status of Yellow.
|
|
Bit 21 - F2I Loop SPI-4.2 Abort Received. Indicates a Status of Yellow.
|
|
Bit 22 - F2I Loop SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow.
|
|
Bit 23 - F2I Loop SPI-4.2 Sync Error. Indicates a Status of Red.
|
|
Bit 24 - F2I HAB Slave FIFO Parity Error. Indicates a Status of Yellow.
|
|
Bit 25 - F2I HAB Slave FIFO Overflow. Indicates a Status of Red.
|
|
Bit 26 - F2I HAB Slave Data Parity Error. Indicates a Status of Yellow.
|
|
Bit 27 - F2I HAB Slave Protocol Error. Indicates a Status of Yellow.
|
|
Bit 28 - F2I HAB Slave Data Error. Indicates a Status of Yellow.
|
|
Bit 29 - F2I FOQM Protocol Error. Indicates a Status of Red.
|
|
Bit 30 - F2I FOQM Overflow. Indicates a Status of Red.
|
|
Bit 31 - F2E Packet Parity Error. Indicates a status of Red.
|
|
Bit 32 - F2E Parity Error in Packet Memory Data (QDR). Indicates a status of Red.
|
|
Bit 33 - F2E Parity Error in Packet Memory Control (QDR). Indicates a status of Red.
|
|
Bit 34 - F2E Packet Memory Parity Error (QDR). Indicates a status of Red."
|
|
::= { rcKhiForwardingF2XHealthEntry 4 }
|
|
|
|
rcKhiForwardingF2XHealthLeftLnHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Left Lane F2X Health as Green/Yellow/Red.
|
|
If multiple events with different health status occurs
|
|
at the same time, the highest health status of all the
|
|
events is reported."
|
|
::= { rcKhiForwardingF2XHealthEntry 5 }
|
|
|
|
rcKhiForwardingF2XHealthMidLnHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Middle Lane F2X Health as Green/Yellow/Red.
|
|
If multiple events with different health status occurs at
|
|
the same time, the highest health status of all the events
|
|
is reported."
|
|
::= { rcKhiForwardingF2XHealthEntry 6 }
|
|
|
|
rcKhiForwardingF2XHealthRightLnHealthStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Right Lane F2X Health as Green/Yellow/Red.
|
|
If multiple events with different health status occurs at
|
|
the same time, the highest health status of all the events
|
|
is reported."
|
|
::= { rcKhiForwardingF2XHealthEntry 7 }
|
|
|
|
-- DFO FORWARDING KHI - History Table
|
|
|
|
rcKhiForwardingHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Key Health Indicator MIB - Historical Data."
|
|
::= { rcKhiForwarding 5 }
|
|
|
|
rcKhiForwardingHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding KHI - History table entry."
|
|
INDEX { rcKhiForwardingHistoryIndex }
|
|
::= { rcKhiForwardingHistoryTable 1 }
|
|
|
|
RcKhiForwardingHistoryEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiForwardingHistoryIndex INTEGER,
|
|
rcKhiForwardingHistoryTimeStamp DateAndTime,
|
|
rcKhiForwardingHistorySlotNumber INTEGER,
|
|
rcKhiForwardingHistoryLane INTEGER,
|
|
rcKhiForwardingHistoryEvent DisplayString
|
|
}
|
|
|
|
rcKhiForwardingHistoryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for Forwarding Health historical data."
|
|
::= { rcKhiForwardingHistoryEntry 1 }
|
|
|
|
rcKhiForwardingHistoryTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp indicating when a particular event occurred."
|
|
::= { rcKhiForwardingHistoryEntry 2 }
|
|
|
|
rcKhiForwardingHistorySlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Slot Number."
|
|
::= { rcKhiForwardingHistoryEntry 3 }
|
|
|
|
rcKhiForwardingHistoryLane OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
leftLane(1),
|
|
middleLane(2),
|
|
rightLane(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Lane where the event occurred."
|
|
::= { rcKhiForwardingHistoryEntry 4 }
|
|
|
|
rcKhiForwardingHistoryEvent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the event"
|
|
::= { rcKhiForwardingHistoryEntry 5 }
|
|
|
|
|
|
-- DFO FORWARDING KHI - Slot Current Health Info
|
|
|
|
rcKhiForwardingCurrentStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingCurrentStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Key Health Indicator MIB -
|
|
Current Status Info."
|
|
::= { rcKhiForwarding 6 }
|
|
|
|
rcKhiForwardingCurrentStatusEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingCurrentStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding KHI - Current Status table entry."
|
|
INDEX { rcKhiForwardingCurrentStatusSlotNumber }
|
|
::= { rcKhiForwardingCurrentStatusTable 1 }
|
|
|
|
RcKhiForwardingCurrentStatusEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiForwardingCurrentStatusSlotNumber INTEGER,
|
|
rcKhiForwardingCurrentStatusLeftLnHealth KhiStatusValue,
|
|
rcKhiForwardingCurrentStatusLeftLnErrMask BITS,
|
|
rcKhiForwardingCurrentStatusMidLnHealth KhiStatusValue,
|
|
rcKhiForwardingCurrentStatusMidLnErrMask BITS,
|
|
rcKhiForwardingCurrentStatusRightLnHealth KhiStatusValue,
|
|
rcKhiForwardingCurrentStatusRightLnErrMask BITS
|
|
}
|
|
|
|
rcKhiForwardingCurrentStatusSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number."
|
|
::= { rcKhiForwardingCurrentStatusEntry 1 }
|
|
|
|
rcKhiForwardingCurrentStatusLeftLnHealth OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Left Lane Current Health as Green/Yellow/Red.
|
|
If multiple events with different health status occurs at
|
|
the same time, the highest health status of all the events
|
|
is reported.Slot Number."
|
|
::= { rcKhiForwardingCurrentStatusEntry 2 }
|
|
|
|
rcKhiForwardingCurrentStatusLeftLnErrMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
asicResets(0),
|
|
rspStateErrors(1),
|
|
rspStatsErrors(2),
|
|
f2xErrors(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Left Lane Current Status Health Bit Mask. Each bit in the
|
|
mask represents what kind of errors the lane is currently
|
|
experiencing. The following are the events -
|
|
Bit 0 - Asic Resets.
|
|
Bit 1 - RSP State Errors.
|
|
Bit 2 - RSP Stats Errors.
|
|
Bit 3 - F2X Errors."
|
|
::= { rcKhiForwardingCurrentStatusEntry 3 }
|
|
|
|
rcKhiForwardingCurrentStatusMidLnHealth OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Middle Lane Current Health as Green/Yellow/Red.
|
|
If multiple events with different health status occurs at
|
|
the same time, the highest health status of all the events
|
|
is reported.Slot Number."
|
|
::= { rcKhiForwardingCurrentStatusEntry 4 }
|
|
|
|
rcKhiForwardingCurrentStatusMidLnErrMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
asicResets(0),
|
|
rspStateErrors(1),
|
|
rspStatsErrors(2),
|
|
f2xErrors(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Middle Lane Current Status Health Bit Mask. Each bit in the
|
|
mask represents what kind of errors the lane is currently
|
|
experiencing. The following are the events -
|
|
Bit 0 - Asic Resets.
|
|
Bit 1 - RSP State Errors.
|
|
Bit 2 - RSP Stats Errors.
|
|
Bit 3 - F2X Errors."
|
|
::= { rcKhiForwardingCurrentStatusEntry 5 }
|
|
|
|
rcKhiForwardingCurrentStatusRightLnHealth OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the Right Lane Current Health as Green/Yellow/Red.
|
|
If multiple events with different health status occurs at
|
|
the same time, the highest health status of all the events
|
|
is reported.Slot Number."
|
|
::= { rcKhiForwardingCurrentStatusEntry 6 }
|
|
|
|
rcKhiForwardingCurrentStatusRightLnErrMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
asicResets(0),
|
|
rspStateErrors(1),
|
|
rspStatsErrors(2),
|
|
f2xErrors(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Right Lane Current Status Health Bit Mask. Each bit in the
|
|
mask represents what kind of errors the lane is currently
|
|
experiencing. The following are the events -
|
|
Bit 0 - Asic Resets.
|
|
Bit 1 - RSP State Errors.
|
|
Bit 2 - RSP Stats Errors.
|
|
Bit 3 - F2X Errors."
|
|
::= { rcKhiForwardingCurrentStatusEntry 7 }
|
|
|
|
-- DFO FORWARDING KHI Monitoring Counters
|
|
|
|
rcKhiForwardingMonitoringCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingMonitoringCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Monitoring Counters MIB."
|
|
::= { rcKhiForwarding 7 }
|
|
|
|
rcKhiForwardingMonitoringCountersEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingMonitoringCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding KHI - Monitoring Counters table entry."
|
|
INDEX { rcKhiForwardingMonitoringCountersSlotNumber }
|
|
::= { rcKhiForwardingMonitoringCountersTable 1 }
|
|
|
|
RcKhiForwardingMonitoringCountersEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiForwardingMonitoringCountersSlotNumber INTEGER,
|
|
rcKhiForwardingMonitoringCountersLeftLnPassPacketsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersMidLnPassPacketsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersRightLnPassPacketsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersLeftLnFabricDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersMidLnFabricDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersRightLnFabricDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersLeftLnPoliceDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersMidLnPoliceDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersRightLnPoliceDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersLeftLnFoqDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersMidLnFoqDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersRightLnFoqDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersLeftLnLegacyDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersMidLnLegacyDropsCnt Counter64,
|
|
rcKhiForwardingMonitoringCountersRightLnLegacyDropsCnt Counter64
|
|
}
|
|
|
|
rcKhiForwardingMonitoringCountersSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number."
|
|
::= { rcKhiForwardingMonitoringCountersEntry 1 }
|
|
|
|
rcKhiForwardingMonitoringCountersLeftLnPassPacketsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Pass Packets Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 2 }
|
|
|
|
rcKhiForwardingMonitoringCountersMidLnPassPacketsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Pass Packets Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 3 }
|
|
|
|
rcKhiForwardingMonitoringCountersRightLnPassPacketsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Pass Packets Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 4 }
|
|
|
|
rcKhiForwardingMonitoringCountersLeftLnFabricDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Fabric Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 5 }
|
|
|
|
rcKhiForwardingMonitoringCountersMidLnFabricDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Fabric Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 6 }
|
|
|
|
rcKhiForwardingMonitoringCountersRightLnFabricDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Fabric Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 7 }
|
|
|
|
rcKhiForwardingMonitoringCountersLeftLnPoliceDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Police Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 8 }
|
|
|
|
rcKhiForwardingMonitoringCountersMidLnPoliceDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Police Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 9 }
|
|
|
|
rcKhiForwardingMonitoringCountersRightLnPoliceDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Police Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 10 }
|
|
|
|
rcKhiForwardingMonitoringCountersLeftLnFoqDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Foq Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 11 }
|
|
|
|
rcKhiForwardingMonitoringCountersMidLnFoqDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Foq Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 12 }
|
|
|
|
rcKhiForwardingMonitoringCountersRightLnFoqDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Foq Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 13 }
|
|
|
|
rcKhiForwardingMonitoringCountersLeftLnLegacyDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Left Lane Legacy Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 14 }
|
|
|
|
rcKhiForwardingMonitoringCountersMidLnLegacyDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Middle Lane Legacy Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 15 }
|
|
|
|
rcKhiForwardingMonitoringCountersRightLnLegacyDropsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of Right Lane Legacy Drops Count"
|
|
::= { rcKhiForwardingMonitoringCountersEntry 16 }
|
|
|
|
-- KHI protocol MIB
|
|
|
|
rcKhiProtocol OBJECT IDENTIFIER ::= { rcKhi 7 }
|
|
|
|
-- KHI OSPF summary table
|
|
|
|
rcKhiOspfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiOspfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ospf protcol KHI summary"
|
|
::= { rcKhiProtocol 1 }
|
|
|
|
rcKhiOspfEntry OBJECT-TYPE
|
|
SYNTAX RcKhiOspfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ospf protcol KHI summary entry"
|
|
INDEX { rcKhiOspfVrfId}
|
|
::= { rcKhiOspfTable 1 }
|
|
RcKhiOspfEntry ::=
|
|
SEQUENCE {
|
|
rcKhiOspfVrfId Integer32,
|
|
rcKhiOspfRouteTableSize Counter32,
|
|
rcKhiOspfRefRouteTableSize Counter32,
|
|
rcKhiOspfLsdbTableSize Counter32,
|
|
rcKhiOspfNumOfInterfaces Counter32,
|
|
rcKhiOspfNumOfAdjacency Counter32,
|
|
rcKhiOspfRefNumOfAdjacency Counter32,
|
|
rcKhiOspfLastClearTimestamp DateAndTime,
|
|
rcKhiOspfFirstEventTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiOspfVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiOspfEntry 1 }
|
|
|
|
rcKhiOspfRouteTableSize OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfEntry 2 }
|
|
|
|
rcKhiOspfRefRouteTableSize OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfEntry 3 }
|
|
|
|
rcKhiOspfLsdbTableSize OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfEntry 4 }
|
|
|
|
rcKhiOspfNumOfInterfaces OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfEntry 5 }
|
|
|
|
rcKhiOspfNumOfAdjacency OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfEntry 6 }
|
|
|
|
rcKhiOspfRefNumOfAdjacency OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfEntry 7 }
|
|
|
|
rcKhiOspfLastClearTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfEntry 8 }
|
|
|
|
rcKhiOspfFirstEventTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfEntry 9 }
|
|
|
|
-- KHI OSPF history table
|
|
|
|
rcKhiOspfHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiOspfHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ospf protcol KHI summary"
|
|
::= { rcKhiProtocol 2 }
|
|
|
|
rcKhiOspfHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiOspfHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ospf protcol KHI summary entry"
|
|
INDEX { rcKhiOspfHistoryVrfId,rcKhiOspfHistoryIndex}
|
|
::= { rcKhiOspfHistoryTable 1 }
|
|
|
|
RcKhiOspfHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiOspfHistoryVrfId Integer32,
|
|
rcKhiOspfHistoryIndex Integer32,
|
|
rcKhiOspfHistoryLsdbTableSize Counter32,
|
|
rcKhiOspfHistoryNumOfAdjacency Counter32,
|
|
rcKhiOspfHistoryTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiOspfHistoryVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiOspfHistoryEntry 1 }
|
|
|
|
rcKhiOspfHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History index for a particular VRF OSPF"
|
|
::= { rcKhiOspfHistoryEntry 2 }
|
|
|
|
rcKhiOspfHistoryLsdbTableSize OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfHistoryEntry 3 }
|
|
|
|
rcKhiOspfHistoryNumOfAdjacency OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfHistoryEntry 4}
|
|
|
|
rcKhiOspfHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiOspfHistoryEntry 5}
|
|
|
|
-- KHI BGP summary table
|
|
|
|
rcKhiBgpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiBgpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Bgp protcol KHI summary"
|
|
::= { rcKhiProtocol 3 }
|
|
|
|
rcKhiBgpEntry OBJECT-TYPE
|
|
SYNTAX RcKhiBgpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Bgp protcol KHI summary entry"
|
|
INDEX { rcKhiBgpVrfId}
|
|
::= { rcKhiBgpTable 1 }
|
|
RcKhiBgpEntry ::=
|
|
SEQUENCE {
|
|
rcKhiBgpVrfId Integer32,
|
|
rcKhiBgpUpdateSent Counter32,
|
|
rcKhiBgpUpdateRecvd Counter32,
|
|
rcKhiBgpNotifySent Counter32,
|
|
rcKhiBgpNotifyRecvd Counter32,
|
|
rcKhiBgpBadEvents Counter32,
|
|
rcKhiBgpRouteTableSize Counter32,
|
|
rcKhiBgpRefRouteTableSize Counter32,
|
|
rcKhiBgpEstablishedNbrs Counter32,
|
|
rcKhiBgpRefEstablishedNbrs Counter32,
|
|
rcKhiBgpNumOfAggregates Counter32,
|
|
rcKhiBgpNumOfImportedRoutes Counter32,
|
|
rcKhiBgpLastClearTimestamp DateAndTime,
|
|
rcKhiBgpFirstEventTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiBgpVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiBgpEntry 1 }
|
|
|
|
rcKhiBgpUpdateSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiBgpEntry 2 }
|
|
|
|
rcKhiBgpUpdateRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Update received"
|
|
::= { rcKhiBgpEntry 3 }
|
|
|
|
rcKhiBgpNotifySent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Notify sent"
|
|
::= { rcKhiBgpEntry 4 }
|
|
|
|
rcKhiBgpNotifyRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BGP Notify received"
|
|
::= { rcKhiBgpEntry 5 }
|
|
|
|
rcKhiBgpBadEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BGP bad event count"
|
|
::= { rcKhiBgpEntry 6 }
|
|
|
|
rcKhiBgpRouteTableSize OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BGP route table size"
|
|
::= { rcKhiBgpEntry 7 }
|
|
|
|
rcKhiBgpRefRouteTableSize OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BGP reference route table size"
|
|
::= { rcKhiBgpEntry 8 }
|
|
|
|
rcKhiBgpEstablishedNbrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BGP established neighbor"
|
|
::= { rcKhiBgpEntry 9 }
|
|
|
|
rcKhiBgpRefEstablishedNbrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BGP established neighbor"
|
|
::= { rcKhiBgpEntry 10 }
|
|
|
|
rcKhiBgpNumOfAggregates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of aggregates"
|
|
::= { rcKhiBgpEntry 11 }
|
|
|
|
rcKhiBgpNumOfImportedRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of imported routes"
|
|
::= { rcKhiBgpEntry 12 }
|
|
|
|
rcKhiBgpLastClearTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiBgpEntry 13 }
|
|
|
|
rcKhiBgpFirstEventTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiBgpEntry 14 }
|
|
|
|
|
|
-- KHI BGP history table
|
|
|
|
rcKhiBgpHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiBgpHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Bgp protcol KHI summary"
|
|
::= { rcKhiProtocol 4 }
|
|
|
|
rcKhiBgpHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiBgpHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Bgp protcol KHI summary entry"
|
|
INDEX { rcKhiBgpHistoryVrfId,rcKhiBgpHistoryIndex}
|
|
::= { rcKhiBgpHistoryTable 1 }
|
|
|
|
RcKhiBgpHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiBgpHistoryVrfId Integer32,
|
|
rcKhiBgpHistoryIndex Integer32,
|
|
rcKhiBgpHistoryRibCount Counter32,
|
|
rcKhiBgpHistoryNumOfPeers Counter32,
|
|
rcKhiBgpHistoryTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiBgpHistoryVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiBgpHistoryEntry 1 }
|
|
|
|
rcKhiBgpHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History index for a particular VRF OSPF"
|
|
::= { rcKhiBgpHistoryEntry 2 }
|
|
|
|
rcKhiBgpHistoryRibCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of BGP Rib"
|
|
::= { rcKhiBgpHistoryEntry 3 }
|
|
|
|
rcKhiBgpHistoryNumOfPeers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of BGP peers"
|
|
::= { rcKhiBgpHistoryEntry 4}
|
|
|
|
rcKhiBgpHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BGP history timestamp"
|
|
::= { rcKhiBgpHistoryEntry 5}
|
|
|
|
-- KHI PIM table
|
|
|
|
rcKhiPimTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiPimEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pim protcol KHI summary"
|
|
::= { rcKhiProtocol 5 }
|
|
|
|
rcKhiPimEntry OBJECT-TYPE
|
|
SYNTAX RcKhiPimEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pim protcol KHI summary entry"
|
|
INDEX { rcKhiPimVrfId}
|
|
::= { rcKhiPimTable 1 }
|
|
RcKhiPimEntry ::=
|
|
SEQUENCE {
|
|
rcKhiPimVrfId Integer32,
|
|
rcKhiPimRoutes Counter32,
|
|
rcKhiPimRefRoutes Counter32,
|
|
rcKhiPimAdjacencies Counter32,
|
|
rcKhiPimRefAdjacencies Counter32,
|
|
rcKhiPimLastClearTimestamp DateAndTime,
|
|
rcKhiPimFirstEventTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiPimVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiPimEntry 1 }
|
|
|
|
rcKhiPimRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiPimEntry 2 }
|
|
|
|
rcKhiPimRefRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiPimEntry 3 }
|
|
|
|
rcKhiPimAdjacencies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiPimEntry 4 }
|
|
|
|
rcKhiPimRefAdjacencies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiPimEntry 5 }
|
|
|
|
rcKhiPimLastClearTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiPimEntry 6 }
|
|
|
|
rcKhiPimFirstEventTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiPimEntry 7 }
|
|
|
|
|
|
-- KHI PIM history table
|
|
|
|
rcKhiPimHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiPimHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pim protcol KHI summary"
|
|
::= { rcKhiProtocol 6 }
|
|
|
|
rcKhiPimHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiPimHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Pim protcol KHI summary entry"
|
|
INDEX { rcKhiPimHistoryVrfId,rcKhiPimHistoryIndex}
|
|
::= { rcKhiPimHistoryTable 1 }
|
|
|
|
RcKhiPimHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiPimHistoryVrfId Integer32,
|
|
rcKhiPimHistoryIndex Integer32,
|
|
rcKhiPimHistoryRouteCount Counter32,
|
|
rcKhiPimHistoryAdjacencies Counter32,
|
|
rcKhiPimHistoryTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiPimHistoryVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiPimHistoryEntry 1 }
|
|
|
|
rcKhiPimHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History index for a particular VRF PIM"
|
|
::= { rcKhiPimHistoryEntry 2 }
|
|
|
|
rcKhiPimHistoryRouteCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiPimHistoryEntry 3 }
|
|
|
|
rcKhiPimHistoryAdjacencies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiPimHistoryEntry 4 }
|
|
|
|
rcKhiPimHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiPimHistoryEntry 5 }
|
|
|
|
-- KHI IGMP history table
|
|
|
|
rcKhiIgmpHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiIgmpHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Igmp protcol KHI summary"
|
|
::= { rcKhiProtocol 7 }
|
|
|
|
rcKhiIgmpHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiIgmpHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Igmp protcol KHI summary entry"
|
|
INDEX { rcKhiIgmpHistoryVrfId,rcKhiIgmpHistoryIndex}
|
|
::= { rcKhiIgmpHistoryTable 1 }
|
|
|
|
RcKhiIgmpHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiIgmpHistoryVrfId Integer32,
|
|
rcKhiIgmpHistoryIndex Integer32,
|
|
rcKhiIgmpHistoryGroupCount Counter32,
|
|
rcKhiIgmpHistorySenderCount Counter32,
|
|
rcKhiIgmpHistoryTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiIgmpHistoryVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiIgmpHistoryEntry 1 }
|
|
|
|
rcKhiIgmpHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History index for a particular VRF PIM"
|
|
::= { rcKhiIgmpHistoryEntry 2 }
|
|
|
|
rcKhiIgmpHistoryGroupCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiIgmpHistoryEntry 3 }
|
|
|
|
rcKhiIgmpHistorySenderCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiIgmpHistoryEntry 4 }
|
|
|
|
rcKhiIgmpHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiIgmpHistoryEntry 5 }
|
|
|
|
-- KHI IgmpSnoop history table
|
|
|
|
rcKhiIgmpSnoopHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiIgmpSnoopHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IgmpSnoop protcol KHI summary"
|
|
::= { rcKhiProtocol 8 }
|
|
|
|
rcKhiIgmpSnoopHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiIgmpSnoopHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IgmpSnoop protcol KHI summary entry"
|
|
INDEX { rcKhiIgmpSnoopHistoryVrfId,rcKhiIgmpSnoopHistoryIndex}
|
|
::= { rcKhiIgmpSnoopHistoryTable 1 }
|
|
|
|
RcKhiIgmpSnoopHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiIgmpSnoopHistoryVrfId Integer32,
|
|
rcKhiIgmpSnoopHistoryIndex Integer32,
|
|
rcKhiIgmpSnoopHistoryStreamCount Counter32,
|
|
rcKhiIgmpSnoopHistoryHostCount Counter32,
|
|
rcKhiIgmpSnoopHistoryTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiIgmpSnoopHistoryVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
fan in the system."
|
|
::= { rcKhiIgmpSnoopHistoryEntry 1 }
|
|
|
|
rcKhiIgmpSnoopHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History index for a particular VRF PIM"
|
|
::= { rcKhiIgmpSnoopHistoryEntry 2 }
|
|
|
|
rcKhiIgmpSnoopHistoryStreamCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IGMP Snoop stream count"
|
|
::= { rcKhiIgmpSnoopHistoryEntry 3 }
|
|
|
|
rcKhiIgmpSnoopHistoryHostCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IgmpSnoop hots count"
|
|
::= { rcKhiIgmpSnoopHistoryEntry 4 }
|
|
|
|
rcKhiIgmpSnoopHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Igmp Snoop timestamp"
|
|
::= { rcKhiIgmpSnoopHistoryEntry 5 }
|
|
|
|
rcKhiVlacpTotalPortCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VLACP port count, where VLACP is enabled"
|
|
::= { rcKhiProtocol 9 }
|
|
|
|
rcKhiVlacpPortUpCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of ports where VLACP is up"
|
|
::= { rcKhiProtocol 10 }
|
|
|
|
rcKhiIstState OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current IST State for KHI"
|
|
::= { rcKhiProtocol 11 }
|
|
|
|
rcKhiFirstIstSyncTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the first IST Sync"
|
|
::= { rcKhiProtocol 12 }
|
|
|
|
rcKhiLastIstSyncTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the last IST Sync"
|
|
::= { rcKhiProtocol 13 }
|
|
|
|
rcKhiNumIstUpEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of IST up events"
|
|
::= { rcKhiProtocol 14 }
|
|
|
|
rcKhiNumIstDownEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of IST down events"
|
|
::= { rcKhiProtocol 15 }
|
|
|
|
rcKhiNumSmltDownEventsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT down events sent"
|
|
::= { rcKhiProtocol 16 }
|
|
|
|
rcKhiLastSmltDownEventSentTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the last SMLT down event sent"
|
|
::= { rcKhiProtocol 17 }
|
|
|
|
rcKhiNumSmltDownEventsRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT down events received"
|
|
::= { rcKhiProtocol 18 }
|
|
|
|
rcKhiLastSmltDownEventRecvTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the last SMLT down event received"
|
|
::= { rcKhiProtocol 19 }
|
|
|
|
rcKhiNumSmltUpEventsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT up events sent"
|
|
::= { rcKhiProtocol 20 }
|
|
|
|
rcKhiLastSmltUpEventSentTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the last SMLT up event sent"
|
|
::= { rcKhiProtocol 21 }
|
|
|
|
rcKhiNumSmltUpEventsRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT Up events received"
|
|
::= { rcKhiProtocol 22 }
|
|
|
|
rcKhiLastSmltUpEventRecvTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the last SMLT up event received"
|
|
::= { rcKhiProtocol 23 }
|
|
|
|
rcKhiNumSendMacAddrSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT send mac addr events sent"
|
|
::= { rcKhiProtocol 24 }
|
|
|
|
rcKhiLastSendMacAddrSentTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the last SMLT send MAC addr event sent"
|
|
::= { rcKhiProtocol 25 }
|
|
|
|
rcKhiNumSendMacAddrRecv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Total number of SMLT send mac addr events recv"
|
|
::= { rcKhiProtocol 26 }
|
|
|
|
rcKhiLastSendMacAddrRecvTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp for the last SMLT send MAC addr event received"
|
|
::= { rcKhiProtocol 27 }
|
|
|
|
rcKhiIstHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiIstHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ist protcol KHI history"
|
|
::= { rcKhiProtocol 28 }
|
|
|
|
rcKhiIstHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiIstHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ist protcol KHI history entry"
|
|
INDEX { rcKhiIstHistoryIndex}
|
|
::= { rcKhiIstHistoryTable 1 }
|
|
|
|
RcKhiIstHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiIstHistoryIndex Integer32,
|
|
rcKhiIstHistoryIstStatus KhiStatusValue,
|
|
rcKhiIstHistoryTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiIstHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History index for a particular IST history entry"
|
|
::= { rcKhiIstHistoryEntry 1 }
|
|
|
|
rcKhiIstHistoryIstStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Status of the IST"
|
|
::= { rcKhiIstHistoryEntry 2 }
|
|
|
|
rcKhiIstHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Timestamp associated with IST history entry"
|
|
::= { rcKhiIstHistoryEntry 3 }
|
|
|
|
rcKhiSmltHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiSmltHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Smlt protocol KHI history"
|
|
::= { rcKhiProtocol 29 }
|
|
|
|
rcKhiSmltHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiSmltHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Smlt protcol KHI history entry"
|
|
INDEX { rcKhiSmltHistoryIndex}
|
|
::= { rcKhiSmltHistoryTable 1 }
|
|
|
|
RcKhiSmltHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiSmltHistoryIndex Integer32,
|
|
rcKhiSmltHistorySmltId Integer32,
|
|
rcKhiSmltHistorySmltStatus KhiStatusValue,
|
|
rcKhiSmltHistoryTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiSmltHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History index for a particular SMLT history entry"
|
|
::= { rcKhiSmltHistoryEntry 1 }
|
|
|
|
rcKhiSmltHistorySmltId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " SMLTID of the SMLT history entry"
|
|
::= { rcKhiSmltHistoryEntry 2 }
|
|
|
|
rcKhiSmltHistorySmltStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Status of the SMLT"
|
|
::= { rcKhiSmltHistoryEntry 3 }
|
|
|
|
rcKhiSmltHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Timestamp associated with IST history entry"
|
|
::= { rcKhiSmltHistoryEntry 4 }
|
|
|
|
rcKhiSmltTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiSmltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Smlt protocol KHI "
|
|
::= { rcKhiProtocol 30 }
|
|
|
|
rcKhiSmltEntry OBJECT-TYPE
|
|
SYNTAX RcKhiSmltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Smlt protcol KHI entry"
|
|
INDEX { rcKhiSmltId}
|
|
::= { rcKhiSmltTable 1 }
|
|
|
|
RcKhiSmltEntry ::=
|
|
SEQUENCE {
|
|
rcKhiSmltId Integer32,
|
|
rcKhiSmltStatus KhiStatusValue,
|
|
rcKhiSmltUpEvents Counter32,
|
|
rcKhiSmltDownEvents Counter32
|
|
}
|
|
|
|
rcKhiSmltId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..512)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " SMLTID of the SMLT entry, also used as index"
|
|
::= { rcKhiSmltEntry 1 }
|
|
|
|
rcKhiSmltStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Status of the SMLT"
|
|
::= { rcKhiSmltEntry 2 }
|
|
|
|
rcKhiSmltUpEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of SMLT Up Events"
|
|
::= { rcKhiSmltEntry 3 }
|
|
|
|
rcKhiSmltDownEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of SMLT Down Events"
|
|
::= { rcKhiSmltEntry 4 }
|
|
|
|
|
|
rcKhiMgmt OBJECT IDENTIFIER ::= { rcKhi 8 }
|
|
|
|
rcKhiMgmtCurrentLogStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current status of logging task"
|
|
::= { rcKhiMgmt 1 }
|
|
|
|
rcKhiMgmtLogFirstHighestEvent OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The first change status of the log since last
|
|
boot or clear.
|
|
'green (1)' means log OK.
|
|
'red (4)' means log fail"
|
|
::= { rcKhiMgmt 2 }
|
|
|
|
rcKhiMgmtLogFirstHighestEventTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Record the first log task change time
|
|
The display format in mmddyyhhmmss.
|
|
If all are zero, it means no change "
|
|
::= { rcKhiMgmt 3 }
|
|
|
|
rcKhiMgmtLogRefStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Reference status before change since last
|
|
boot or clear.
|
|
'green (1)' means log OK.
|
|
'red (4)' means log fail"
|
|
::= { rcKhiMgmt 4 }
|
|
|
|
rcKhiMgmtLogStatusLastClearTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Record the first log task change time
|
|
The display format in mmddyyhhmmss.
|
|
If all are zero, it means no change "
|
|
::= { rcKhiMgmt 5 }
|
|
|
|
rcKhiMgmtLogHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiMgmtLogHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Log history KHI summary"
|
|
::= { rcKhiMgmt 6 }
|
|
|
|
rcKhiMgmtLogHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiMgmtLogHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Log sttaus KHI summary entry"
|
|
INDEX { rcKhiMgmtLogHistoryIndex}
|
|
::= { rcKhiMgmtLogHistoryTable 1 }
|
|
|
|
RcKhiMgmtLogHistoryEntry ::=
|
|
SEQUENCE {
|
|
rcKhiMgmtLogHistoryIndex Integer32,
|
|
rcKhiMgmtLogHistoryStatus KhiStatusValue,
|
|
rcKhiMgmtLogHistoryTimestamp DateAndTime
|
|
}
|
|
|
|
rcKhiMgmtLogHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique history index used to identify a particular
|
|
entry in log history."
|
|
::= { rcKhiMgmtLogHistoryEntry 1 }
|
|
|
|
rcKhiMgmtLogHistoryStatus OBJECT-TYPE
|
|
SYNTAX KhiStatusValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Changing Status"
|
|
::= { rcKhiMgmtLogHistoryEntry 2 }
|
|
|
|
rcKhiMgmtLogHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Status change timestamp."
|
|
::= { rcKhiMgmtLogHistoryEntry 3 }
|
|
|
|
|
|
-- DFO IP Interface KHI Historical Data
|
|
|
|
rcKhiIpInterface OBJECT IDENTIFIER ::= { rcKhi 9 }
|
|
|
|
rcKhiIpInterfaceHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiIpInterfaceHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip Interface Historical Data"
|
|
::= { rcKhiIpInterface 1 }
|
|
|
|
rcKhiIpInterfaceHistoryEntry OBJECT-TYPE
|
|
SYNTAX RcKhiIpInterfaceHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip Interface history table entry."
|
|
INDEX { rcKhiIpInterfaceHistoryIndex }
|
|
::= { rcKhiIpInterfaceHistoryTable 1 }
|
|
|
|
RcKhiIpInterfaceHistoryEntry ::=
|
|
SEQUENCE
|
|
{
|
|
rcKhiIpInterfaceHistoryIndex INTEGER,
|
|
rcKhiIpInterfaceHistoryTimestamp DateAndTime,
|
|
rcKhiIpInterfaceHistoryIpAddr IpAddress,
|
|
rcKhiIpInterfaceHistoryVlanId INTEGER,
|
|
rcKhiIpInterfaceHistoryEvent INTEGER
|
|
}
|
|
|
|
rcKhiIpInterfaceHistoryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Historical data index number."
|
|
::= { rcKhiIpInterfaceHistoryEntry 1 }
|
|
|
|
rcKhiIpInterfaceHistoryTimestamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Timestamp indicating when the event occurred."
|
|
::= { rcKhiIpInterfaceHistoryEntry 2 }
|
|
|
|
rcKhiIpInterfaceHistoryIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address of the interface."
|
|
::= { rcKhiIpInterfaceHistoryEntry 3 }
|
|
|
|
rcKhiIpInterfaceHistoryVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan id of the IP interface."
|
|
::= { rcKhiIpInterfaceHistoryEntry 4 }
|
|
|
|
rcKhiIpInterfaceHistoryEvent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether the interface went up or down."
|
|
::= { rcKhiIpInterfaceHistoryEntry 5 }
|
|
|
|
|
|
rcKhiSlot OBJECT IDENTIFIER ::= { rcKhi 10 }
|
|
|
|
-- Slot Performance Table
|
|
rcKhiSlotPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiSlotPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Performance Information"
|
|
::= { rcKhiSlot 1 }
|
|
|
|
rcKhiSlotPerfEntry OBJECT-TYPE
|
|
SYNTAX RcKhiSlotPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Performance Entry"
|
|
INDEX { rcKhiSlotIndex }
|
|
::= { rcKhiSlotPerfTable 1 }
|
|
|
|
RcKhiSlotPerfEntry ::=
|
|
SEQUENCE {
|
|
rcKhiSlotIndex Integer32,
|
|
rcKhiSlotCpuCurrentUtil Integer32,
|
|
rcKhiSlotCpu5MinAve INTEGER,
|
|
rcKhiSlotCpu5MinHi INTEGER,
|
|
rcKhiSlotCpu5MinHiTime DateAndTime,
|
|
rcKhiSlotMemUsed Integer32,
|
|
rcKhiSlotMemFree Integer32,
|
|
rcKhiSlotMemUtil Integer32,
|
|
rcKhiSlotMem5MinAve Integer32,
|
|
rcKhiSlotMem5MinHi Integer32,
|
|
rcKhiSlotMem5MinHiTime DateAndTime,
|
|
rcKhiSlotUsedFbuf Integer32,
|
|
rcKhiSlotFreeFbuf Integer32,
|
|
rcKhiSlotNoFbuf Integer32,
|
|
rcKhiSlotNetStackSysFreeMbuf Integer32,
|
|
rcKhiSlotNetStackDataFreeMbuf Integer32,
|
|
rcKhiSlotNetStackSysUsedMbuf Integer32,
|
|
rcKhiSlotNetStackDataUsedMbuf Integer32,
|
|
rcKhiSlotNetStackSysSocketMbuf Integer32,
|
|
rcKhiSlotQHigh Integer32,
|
|
rcKhiSlotQNormal Integer32,
|
|
rcKhiSlotFreeQEntries Integer32,
|
|
rcKhiSlotCpu1MinAve Integer32,
|
|
rcKhiSlotCpu1MinHi Integer32,
|
|
rcKhiSlotCpu1MinHiTime DateAndTime
|
|
}
|
|
|
|
rcKhiSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..12 | 21..26)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify the slot"
|
|
::= { rcKhiSlotPerfEntry 1 }
|
|
|
|
rcKhiSlotCpuCurrentUtil OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Percentage CPU utilization under current
|
|
operating conditions."
|
|
::= { rcKhiSlotPerfEntry 2 }
|
|
|
|
rcKhiSlotCpu5MinAve OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Average percentage CPU utilization over
|
|
the past 5 minutes."
|
|
::= { rcKhiSlotPerfEntry 3 }
|
|
|
|
rcKhiSlotCpu5MinHi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Hi watermark for percentage CPU utilization
|
|
over the past 5 minutes."
|
|
::= { rcKhiSlotPerfEntry 4 }
|
|
|
|
rcKhiSlotCpu5MinHiTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Last time of at which rcKhiSlotCpu5MinHi sampling occured."
|
|
::= { rcKhiSlotPerfEntry 5 }
|
|
|
|
rcKhiSlotMemUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The amount of DRAM memory consumed in KB."
|
|
::= { rcKhiSlotPerfEntry 6 }
|
|
|
|
rcKhiSlotMemFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The amount of DRAM memory available in KB."
|
|
::= { rcKhiSlotPerfEntry 7 }
|
|
|
|
rcKhiSlotMemUtil OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Current percentage of memory utilization."
|
|
::= { rcKhiSlotPerfEntry 8 }
|
|
|
|
rcKhiSlotMem5MinAve OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Average percentage of memory utilization over the
|
|
past 5 minutes."
|
|
::= { rcKhiSlotPerfEntry 9 }
|
|
|
|
rcKhiSlotMem5MinHi OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "High watermark for percentage memory
|
|
utilization over the past 5 minutes."
|
|
::= { rcKhiSlotPerfEntry 10 }
|
|
|
|
rcKhiSlotMem5MinHiTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The last time memory information was registered."
|
|
::= { rcKhiSlotPerfEntry 11 }
|
|
|
|
rcKhiSlotUsedFbuf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Fbufs in use."
|
|
::= { rcKhiSlotPerfEntry 12 }
|
|
|
|
rcKhiSlotFreeFbuf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of Fbufs available."
|
|
::= { rcKhiSlotPerfEntry 13 }
|
|
|
|
rcKhiSlotNoFbuf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times when running out of Fbuff"
|
|
::= { rcKhiSlotPerfEntry 14 }
|
|
|
|
rcKhiSlotNetStackSysFreeMbuf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of network stack system Mbufs available."
|
|
::= { rcKhiSlotPerfEntry 15 }
|
|
|
|
rcKhiSlotNetStackDataFreeMbuf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of network stack data Mbufs available."
|
|
::= { rcKhiSlotPerfEntry 16 }
|
|
|
|
rcKhiSlotNetStackSysUsedMbuf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of network stack system Mbufs in use."
|
|
::= { rcKhiSlotPerfEntry 17 }
|
|
|
|
rcKhiSlotNetStackDataUsedMbuf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of network stack data Mbufs in use."
|
|
::= { rcKhiSlotPerfEntry 18 }
|
|
|
|
rcKhiSlotNetStackSysSocketMbuf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of network stack system sockets."
|
|
::= { rcKhiSlotPerfEntry 19 }
|
|
|
|
rcKhiSlotQHigh OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The highest number of queue entries consumed
|
|
for system messaging."
|
|
::= { rcKhiSlotPerfEntry 20 }
|
|
|
|
rcKhiSlotQNormal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current number of queue entries consumed
|
|
for system messaging."
|
|
::= { rcKhiSlotPerfEntry 21 }
|
|
|
|
rcKhiSlotFreeQEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current available number of queue entries
|
|
for system messaging."
|
|
::= { rcKhiSlotPerfEntry 22 }
|
|
|
|
rcKhiSlotCpu1MinAve OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Average percentage CPU utilization over
|
|
the past 1 minute."
|
|
::= { rcKhiSlotPerfEntry 23 }
|
|
|
|
rcKhiSlotCpu1MinHi OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Hi watermark for percentage CPU utilization
|
|
over the past 1 minute."
|
|
::= { rcKhiSlotPerfEntry 24 }
|
|
|
|
rcKhiSlotCpu1MinHiTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Last time at which rcKhiSlotCpu1MinHi sampling occured."
|
|
::= { rcKhiSlotPerfEntry 25 }
|
|
|
|
-- Slot Process Table
|
|
rcKhiSlotProcessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiSlotProcessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CP Process Information"
|
|
::= { rcKhiSlot 2 }
|
|
|
|
rcKhiSlotProcessEntry OBJECT-TYPE
|
|
SYNTAX RcKhiSlotProcessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Process Entry"
|
|
INDEX { rcKhiSlotIndex,
|
|
rcKhiSlotProcessId }
|
|
::= { rcKhiSlotProcessTable 1 }
|
|
|
|
RcKhiSlotProcessEntry ::=
|
|
SEQUENCE {
|
|
rcKhiSlotProcessId Integer32,
|
|
rcKhiSlotProcessParentId Integer32,
|
|
rcKhiSlotProcessName DisplayString,
|
|
rcKhiSlotProcessVmSize Integer32,
|
|
rcKhiSlotProcessVmLck Integer32,
|
|
rcKhiSlotProcessVmRss Integer32,
|
|
rcKhiSlotProcessVmData Integer32,
|
|
rcKhiSlotProcessVmStk Integer32,
|
|
rcKhiSlotProcessVmExe Integer32,
|
|
rcKhiSlotProcessVmLib Integer32
|
|
}
|
|
|
|
rcKhiSlotProcessId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Process ID"
|
|
::= { rcKhiSlotProcessEntry 1}
|
|
|
|
rcKhiSlotProcessParentId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Parent Process ID"
|
|
::= { rcKhiSlotProcessEntry 2 }
|
|
|
|
|
|
rcKhiSlotProcessName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the process running"
|
|
::= { rcKhiSlotProcessEntry 3 }
|
|
|
|
rcKhiSlotProcessVmSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The size of the virtual memory allocated to the process"
|
|
::= { rcKhiSlotProcessEntry 4 }
|
|
|
|
rcKhiSlotProcessVmLck OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The amount of locked memory"
|
|
::= { rcKhiSlotProcessEntry 5 }
|
|
|
|
rcKhiSlotProcessVmRss OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The amount of memory mapped in RAM ( instead of swapped out) "
|
|
::= { rcKhiSlotProcessEntry 6 }
|
|
|
|
rcKhiSlotProcessVmData OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The size of the Data segment"
|
|
::= { rcKhiSlotProcessEntry 7 }
|
|
|
|
rcKhiSlotProcessVmStk OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The stack size"
|
|
::= { rcKhiSlotProcessEntry 8 }
|
|
|
|
rcKhiSlotProcessVmExe OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The size of the executable segment"
|
|
::= { rcKhiSlotProcessEntry 9 }
|
|
|
|
rcKhiSlotProcessVmLib OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The size of the library code"
|
|
::= { rcKhiSlotProcessEntry 10 }
|
|
|
|
|
|
-- Slot Task Info
|
|
|
|
rcKhiSlotPThreadTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiSlotPThreadEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot pthread information"
|
|
::= { rcKhiSlot 3 }
|
|
|
|
rcKhiSlotPThreadEntry OBJECT-TYPE
|
|
SYNTAX RcKhiSlotPThreadEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot pthread entry"
|
|
INDEX { rcKhiSlotIndex,
|
|
rcKhiSlotProcessId,
|
|
rcKhiSlotPThreadTaskId }
|
|
::= { rcKhiSlotPThreadTable 1 }
|
|
|
|
RcKhiSlotPThreadEntry ::=
|
|
SEQUENCE {
|
|
rcKhiSlotPThreadTaskId Integer32,
|
|
rcKhiSlotPThreadName DisplayString,
|
|
rcKhiSlotPThreadCpuCurrentUtil Integer32,
|
|
rcKhiSlotPThreadCpu5MinAve Integer32,
|
|
rcKhiSlotPThreadCpu5MinHi Integer32,
|
|
rcKhiSlotPthread5MinHiTime DateAndTime
|
|
}
|
|
rcKhiSlotPThreadTaskId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Task ID"
|
|
::= { rcKhiSlotPThreadEntry 1 }
|
|
|
|
rcKhiSlotPThreadName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the process running"
|
|
::= { rcKhiSlotPThreadEntry 2 }
|
|
|
|
rcKhiSlotPThreadCpuCurrentUtil OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Percentage CPU utilization under current
|
|
operating conditions. Value is in tenth's
|
|
of a percent."
|
|
::= { rcKhiSlotPThreadEntry 3 }
|
|
|
|
rcKhiSlotPThreadCpu5MinAve OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Average percentage CPU utilization over
|
|
the past 5 minutes. Value is in tenth's
|
|
of a percent."
|
|
::= { rcKhiSlotPThreadEntry 4 }
|
|
|
|
rcKhiSlotPThreadCpu5MinHi OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Hi watermark for percentage CPU utilization
|
|
over the past 5 minutes. Value is in tenth's
|
|
of a percent."
|
|
::= { rcKhiSlotPThreadEntry 5 }
|
|
|
|
rcKhiSlotPthread5MinHiTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Last time at which sampling occured."
|
|
::= { rcKhiSlotPThreadEntry 6 }
|
|
|
|
rcKhiForwardingCb OBJECT IDENTIFIER ::= { rcKhi 11 }
|
|
|
|
|
|
-- KHI Forwarding Interface Table
|
|
|
|
rcKhiForwardingCbIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingCbIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Interface Key Health Indicator MIB - All Cobalt Blue Data."
|
|
::= { rcKhiForwardingCb 1 }
|
|
|
|
rcKhiForwardingCbIfEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingCbIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Interface KHI - Cobalt Blue table entry."
|
|
INDEX { rcKhiForwardingCbIfIndex }
|
|
::= { rcKhiForwardingCbIfTable 1 }
|
|
|
|
RcKhiForwardingCbIfEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingCbIfIndex InterfaceIndex,
|
|
rcKhiForwardingCbIfRxOk Counter64,
|
|
rcKhiForwardingCbIfTxOk Counter64,
|
|
rcKhiForwardingCbIfRxErr Counter64,
|
|
rcKhiForwardingCbIfTxErr Counter64,
|
|
rcKhiForwardingCbIfRdbgc0 Counter64,
|
|
rcKhiForwardingCbIfRdbgc0Mask Counter64,
|
|
rcKhiForwardingCbIfTdbgc0 Counter64,
|
|
rcKhiForwardingCbIfTdbgc0Mask Counter64,
|
|
rcKhiForwardingCbIfK2IpmcDrops Counter64
|
|
}
|
|
|
|
rcKhiForwardingCbIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface index for CB's KHI Forwarding data.
|
|
Indicies are essentially port based."
|
|
::= { rcKhiForwardingCbIfEntry 1 }
|
|
|
|
rcKhiForwardingCbIfRxOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Receieve OK Packets"
|
|
::= { rcKhiForwardingCbIfEntry 2 }
|
|
|
|
rcKhiForwardingCbIfTxOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Transmit OK Packets"
|
|
::= { rcKhiForwardingCbIfEntry 3 }
|
|
|
|
rcKhiForwardingCbIfRxErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Receive Error Packets"
|
|
::= { rcKhiForwardingCbIfEntry 4 }
|
|
|
|
rcKhiForwardingCbIfTxErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Transmit Error Packets"
|
|
::= { rcKhiForwardingCbIfEntry 5 }
|
|
|
|
rcKhiForwardingCbIfRdbgc0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RDBGC0 Packets"
|
|
::= { rcKhiForwardingCbIfEntry 6 }
|
|
|
|
rcKhiForwardingCbIfRdbgc0Mask OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RDBGC0 Mask"
|
|
::= { rcKhiForwardingCbIfEntry 7 }
|
|
|
|
rcKhiForwardingCbIfTdbgc0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TDBGC0 Packets"
|
|
::= { rcKhiForwardingCbIfEntry 8 }
|
|
|
|
rcKhiForwardingCbIfTdbgc0Mask OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TDBGC0 Mask"
|
|
::= { rcKhiForwardingCbIfEntry 9 }
|
|
|
|
rcKhiForwardingCbIfK2IpmcDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP Multicast Drops"
|
|
::= { rcKhiForwardingCbIfEntry 10 }
|
|
|
|
|
|
-- KHI Forwarding Mac-Higig table
|
|
|
|
rcKhiForwardingCbMachigigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingCbMachigigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Mac-Higig Key Health Indicator MIB - All Cobalt Blue Data."
|
|
::= { rcKhiForwardingCb 2}
|
|
|
|
rcKhiForwardingCbMachigigEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingCbMachigigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Mac-Higig KHI - Cobalt Blue table entry."
|
|
INDEX { rcKhiForwardingCbMachigigIndex }
|
|
::= { rcKhiForwardingCbMachigigTable 1 }
|
|
|
|
RcKhiForwardingCbMachigigEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingCbMachigigIndex INTEGER,
|
|
rcKhiForwardingCbMachigigMacK2 Counter64,
|
|
rcKhiForwardingCbMachigigMacK2Mac Counter64,
|
|
rcKhiForwardingCbMachigigRDGBC0 Counter64,
|
|
rcKhiForwardingCbMachigigRDGBC0mask Counter64,
|
|
rcKhiForwardingCbMachigigTDGBC0 Counter64,
|
|
rcKhiForwardingCbMachigigTDGBC0mask Counter64,
|
|
rcKhiForwardingCbMachigigIFPDOSDrops Counter64
|
|
}
|
|
|
|
rcKhiForwardingCbMachigigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for CB's Forwarding MAc-Higig Health data. There are 6
|
|
indicies reserved on a per slot basis. Depending on
|
|
the card present and the data being requested not all
|
|
indicies may be used."
|
|
::= { rcKhiForwardingCbMachigigEntry 1 }
|
|
|
|
rcKhiForwardingCbMachigigMacK2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbMachigigEntry 2 }
|
|
|
|
rcKhiForwardingCbMachigigMacK2Mac OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbMachigigEntry 3 }
|
|
|
|
rcKhiForwardingCbMachigigRDGBC0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbMachigigEntry 4 }
|
|
|
|
rcKhiForwardingCbMachigigRDGBC0mask OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbMachigigEntry 5 }
|
|
|
|
rcKhiForwardingCbMachigigTDGBC0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbMachigigEntry 6 }
|
|
|
|
rcKhiForwardingCbMachigigTDGBC0mask OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbMachigigEntry 7 }
|
|
|
|
rcKhiForwardingCbMachigigIFPDOSDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbMachigigEntry 8 }
|
|
|
|
|
|
-- KHI Forwarding K2 table
|
|
|
|
rcKhiForwardingCbK2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingCbK2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding K2 Key Health Indicator MIB - All Cobalt Blue Data."
|
|
::= { rcKhiForwardingCb 3}
|
|
|
|
rcKhiForwardingCbK2Entry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingCbK2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding K2 KHI - Cobalt Blue table entry."
|
|
INDEX { rcKhiForwardingCbK2Index }
|
|
::= { rcKhiForwardingCbK2Table 1 }
|
|
|
|
RcKhiForwardingCbK2Entry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingCbK2Index INTEGER,
|
|
rcKhiForwardingCbK2MacK2 Counter64,
|
|
rcKhiForwardingCbK2Zagros Counter64,
|
|
rcKhiForwardingCbK2ZagrosK2 Counter64,
|
|
rcKhiForwardingCbK2Mac Counter64,
|
|
rcKhiForwardingCbK2MacK2Err Counter64,
|
|
rcKhiForwardingCbK2ZagrosErr Counter64,
|
|
rcKhiForwardingCbK2ZagrosK2Err Counter64,
|
|
rcKhiForwardingCbK2MacErr Counter64
|
|
}
|
|
|
|
rcKhiForwardingCbK2Index OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for CB's Forwarding K2 Health data. There are 6
|
|
indicies reserved on a per slot basis. Depending on
|
|
the card present and the data being requested not all
|
|
indicies may be used."
|
|
::= { rcKhiForwardingCbK2Entry 1 }
|
|
|
|
rcKhiForwardingCbK2MacK2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbK2Entry 2 }
|
|
|
|
rcKhiForwardingCbK2Zagros OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbK2Entry 3 }
|
|
|
|
rcKhiForwardingCbK2ZagrosK2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbK2Entry 4 }
|
|
|
|
rcKhiForwardingCbK2Mac OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbK2Entry 5 }
|
|
|
|
rcKhiForwardingCbK2MacK2Err OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbK2Entry 6 }
|
|
|
|
rcKhiForwardingCbK2ZagrosErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbK2Entry 7 }
|
|
|
|
rcKhiForwardingCbK2ZagrosK2Err OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbK2Entry 8 }
|
|
|
|
rcKhiForwardingCbK2MacErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbK2Entry 9 }
|
|
|
|
|
|
-- KHI Forwarding Zagros table
|
|
|
|
rcKhiForwardingCbZagrosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingCbZagrosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Zagros Forwarding Zagros Key Health Indicator MIB - All Cobalt Blue Data."
|
|
::= { rcKhiForwardingCb 4 }
|
|
|
|
rcKhiForwardingCbZagrosEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingCbZagrosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Zagros Forwarding KHI - Cobalt Blue table entry."
|
|
INDEX { rcKhiForwardingCbZagrosIndex }
|
|
::= { rcKhiForwardingCbZagrosTable 1 }
|
|
|
|
RcKhiForwardingCbZagrosEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingCbZagrosIndex INTEGER,
|
|
rcKhiForwardingCbZagrosK2Zagros Counter64,
|
|
rcKhiForwardingCbZagrosRsp Counter64,
|
|
rcKhiForwardingCbZagrosQe Counter64,
|
|
rcKhiForwardingCbZagrosQeZagros Counter64,
|
|
rcKhiForwardingCbZagrosK2 Counter64,
|
|
rcKhiForwardingCbZagrosPmmPoolLo Counter64,
|
|
rcKhiForwardingCbZagrosPmmPoolHigh Counter64,
|
|
rcKhiForwardingCbZagrosPmmRspDropCounters Counter64,
|
|
rcKhiForwardingCbZagrosPmmoutputDropCount Counter64,
|
|
rcKhiForwardingCbZagrosPmmAdmissionRspDropCount Counter64,
|
|
rcKhiForwardingCbZagrosPmmAdmissionErrDropCount Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool1Drop Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool2Drop Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool3Drop Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool4Drop Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool5Drop Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool6Drop Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool7Drop Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool8Drop Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool9Drop Counter64,
|
|
rcKhiForwardingCbZagrosPmmPool10Drop Counter64,
|
|
rcKhiForwardingCbZagrosHbeCommandDrops Counter64,
|
|
rcKhiForwardingCbZagrosTcamSearchError Counter64,
|
|
rcKhiForwardingCbZagrosEhpAllPortDownIstCounter Counter64,
|
|
rcKhiForwardingCbZagrosEhpAllPortDownMltCounter Counter64,
|
|
rcKhiForwardingCbZagrosEhpErrorDropCounter Counter64,
|
|
rcKhiForwardingCbZagrosIgrFilterDropCount Counter64,
|
|
rcKhiForwardingCbZagrosZapTxCtl Counter64,
|
|
rcKhiForwardingCbZagrosZapTxDat Counter64,
|
|
rcKhiForwardingCbZagrosZapRxCtl Counter64,
|
|
rcKhiForwardingCbZagrosZapRxDat Counter64,
|
|
rcKhiForwardingCbZagrosZapTxHbe Counter64,
|
|
rcKhiForwardingCbZagrosTcamSearchVal Counter64,
|
|
rcKhiForwardingCbZagrosEmbDropCount Counter64,
|
|
rcKhiForwardingCbZagrosEhpFilterDropCount Counter64,
|
|
rcKhiForwardingCbZagrosEgrIpmcDropCount Counter64,
|
|
rcKhiForwardingCbZagrosEgressEsb1Count Counter64,
|
|
rcKhiForwardingCbZagrosEgressEsb2Count Counter64,
|
|
rcKhiForwardingCbZagrosEgressEsb3Count Counter64,
|
|
rcKhiForwardingCbZagrosEgressEsb4Count Counter64,
|
|
rcKhiForwardingCbZagrosEgressEsb5Count Counter64,
|
|
rcKhiForwardingCbZagrosEgressEsb6Count Counter64,
|
|
rcKhiForwardingCbZagrosRspRx Counter64,
|
|
rcKhiForwardingCbZagrosOpTx Counter64,
|
|
rcKhiForwardingCbZagrosRspTx Counter64,
|
|
rcKhiForwardingCbZagrosCifRqCount Counter64,
|
|
rcKhiForwardingCbZagrosCifRsCounter Counter64,
|
|
rcKhiForwardingCbZagrosPage1Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosPage2Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosPage3Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosPage4Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosPage5Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosPage6Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosPage7Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosPage8Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosPage9Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosPage10Count Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosShPp Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosFpCounts Counter64, --obsolete
|
|
rcKhiForwardingCbZagrosRspPlcThresholdReg Counter64,
|
|
rcKhiForwardingCbZagrosRePlc Counter64,
|
|
rcKhiForwardingCbZagrosNumPools Counter64,
|
|
rcKhiForwardingCbZagrosFpCntOPA Counter32,
|
|
rcKhiForwardingCbZagrosFpCntRPA Counter32,
|
|
rcKhiForwardingCbZagrosFpCntFPM Counter32,
|
|
rcKhiForwardingCbZagrosRspPlcPktCntPeak Counter32,
|
|
rcKhiForwardingCbZagrosRspPlcPktCntCurr Counter32,
|
|
rcKhiForwardingCbZagrosRePlcPktCntPeak Counter32,
|
|
rcKhiForwardingCbZagrosRePlcPktCntCurr Counter32,
|
|
rcKhiForwardingCbZagrosShPpPeak Counter32,
|
|
rcKhiForwardingCbZagrosShPpCurr Counter32,
|
|
rcKhiForwardingCbZagrosEgressMultiCastPeak Counter32,
|
|
rcKhiForwardingCbZagrosEgressMultiCastCurr Counter32,
|
|
rcKhiForwardingCbZagrosEgressOOBPeak Counter32,
|
|
rcKhiForwardingCbZagrosEgressOOBCurr Counter32,
|
|
rcKhiForwardingCbZagrosIngressHeartbeatPeak Counter32,
|
|
rcKhiForwardingCbZagrosIngressHeartbeatCurr Counter32,
|
|
rcKhiForwardingCbZagrosIngressCOPInsertPeak Counter32,
|
|
rcKhiForwardingCbZagrosIngressCOPInsertCurr Counter32,
|
|
rcKhiForwardingCbZagrosIngressEfCtlPeak Counter32,
|
|
rcKhiForwardingCbZagrosIngressEfCtlCurr Counter32,
|
|
rcKhiForwardingCbZagrosIngressAfBePeak Counter32,
|
|
rcKhiForwardingCbZagrosIngressAfBeCurr Counter32,
|
|
rcKhiForwardingCbZagrosEgressL2BcUcPeak Counter32,
|
|
rcKhiForwardingCbZagrosEgressL2BcUcCurr Counter32,
|
|
rcKhiForwardingCbZagrosEgressMirrorPeak Counter32,
|
|
rcKhiForwardingCbZagrosEgressMirrorCurr Counter32,
|
|
rcKhiForwardingCbZagrosPool9Peak Counter32,
|
|
rcKhiForwardingCbZagrosPool9Curr Counter32,
|
|
rcKhiForwardingCbZagrosPmmFpPlenErr Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError0 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError1 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError2 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError3 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError4 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError5 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError6 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError7 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError8 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError9 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError10 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError11 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError12 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError13 Counter32,
|
|
rcKhiForwardingCbZagrosEFSInternalError14 Counter32
|
|
|
|
}
|
|
|
|
rcKhiForwardingCbZagrosIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for CB's Forwarding Zagros Health data. There are 6
|
|
indicies reserved on a per slot basis. Depending on
|
|
the card present and the data being requested not all
|
|
indicies may be used."
|
|
::= { rcKhiForwardingCbZagrosEntry 1 }
|
|
|
|
rcKhiForwardingCbZagrosK2Zagros OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 2 }
|
|
|
|
rcKhiForwardingCbZagrosRsp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 3 }
|
|
|
|
rcKhiForwardingCbZagrosQe OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 4 }
|
|
|
|
rcKhiForwardingCbZagrosQeZagros OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 5 }
|
|
|
|
rcKhiForwardingCbZagrosK2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 6 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPoolLo OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 7 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPoolHigh OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 8 }
|
|
|
|
rcKhiForwardingCbZagrosPmmRspDropCounters OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 9 }
|
|
|
|
rcKhiForwardingCbZagrosPmmoutputDropCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 10 }
|
|
|
|
rcKhiForwardingCbZagrosPmmAdmissionRspDropCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 11 }
|
|
|
|
rcKhiForwardingCbZagrosPmmAdmissionErrDropCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 12 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool1Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 13 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool2Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 14 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool3Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 15 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool4Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 16 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool5Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 17 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool6Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 18 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool7Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 19 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool8Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 20 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool9Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 21 }
|
|
|
|
rcKhiForwardingCbZagrosPmmPool10Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 22 }
|
|
|
|
rcKhiForwardingCbZagrosHbeCommandDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 23 }
|
|
|
|
rcKhiForwardingCbZagrosTcamSearchError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 24 }
|
|
|
|
rcKhiForwardingCbZagrosEhpAllPortDownIstCounter OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 25 }
|
|
|
|
rcKhiForwardingCbZagrosEhpAllPortDownMltCounter OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 26 }
|
|
|
|
rcKhiForwardingCbZagrosEhpErrorDropCounter OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 27 }
|
|
|
|
rcKhiForwardingCbZagrosIgrFilterDropCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 28 }
|
|
|
|
rcKhiForwardingCbZagrosZapTxCtl OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 29 }
|
|
|
|
rcKhiForwardingCbZagrosZapTxDat OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 30 }
|
|
|
|
rcKhiForwardingCbZagrosZapRxCtl OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 31 }
|
|
|
|
rcKhiForwardingCbZagrosZapRxDat OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 32 }
|
|
|
|
rcKhiForwardingCbZagrosZapTxHbe OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 33 }
|
|
|
|
rcKhiForwardingCbZagrosTcamSearchVal OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 34 }
|
|
|
|
rcKhiForwardingCbZagrosEmbDropCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 35 }
|
|
|
|
rcKhiForwardingCbZagrosEhpFilterDropCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 36 }
|
|
|
|
rcKhiForwardingCbZagrosEgrIpmcDropCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 37 }
|
|
|
|
rcKhiForwardingCbZagrosEgressEsb1Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 38 }
|
|
|
|
rcKhiForwardingCbZagrosEgressEsb2Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 39 }
|
|
|
|
rcKhiForwardingCbZagrosEgressEsb3Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 40 }
|
|
|
|
rcKhiForwardingCbZagrosEgressEsb4Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 41 }
|
|
|
|
rcKhiForwardingCbZagrosEgressEsb5Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 42 }
|
|
|
|
rcKhiForwardingCbZagrosEgressEsb6Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 43 }
|
|
|
|
rcKhiForwardingCbZagrosRspRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 44 }
|
|
|
|
rcKhiForwardingCbZagrosOpTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 45 }
|
|
|
|
rcKhiForwardingCbZagrosRspTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 46 }
|
|
|
|
rcKhiForwardingCbZagrosCifRqCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 47 }
|
|
|
|
rcKhiForwardingCbZagrosCifRsCounter OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 48 }
|
|
|
|
|
|
rcKhiForwardingCbZagrosPage1Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 49 }
|
|
|
|
|
|
rcKhiForwardingCbZagrosPage2Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 50 }
|
|
|
|
|
|
rcKhiForwardingCbZagrosPage3Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 51 }
|
|
|
|
|
|
rcKhiForwardingCbZagrosPage4Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 52 }
|
|
|
|
rcKhiForwardingCbZagrosPage5Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 53 }
|
|
|
|
rcKhiForwardingCbZagrosPage6Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 54 }
|
|
|
|
rcKhiForwardingCbZagrosPage7Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 55 }
|
|
|
|
rcKhiForwardingCbZagrosPage8Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 56 }
|
|
|
|
rcKhiForwardingCbZagrosPage9Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 57 }
|
|
|
|
rcKhiForwardingCbZagrosPage10Count OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 58 }
|
|
|
|
rcKhiForwardingCbZagrosShPp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 59 }
|
|
|
|
rcKhiForwardingCbZagrosFpCounts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 60 }
|
|
|
|
rcKhiForwardingCbZagrosRspPlcThresholdReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 61 }
|
|
|
|
rcKhiForwardingCbZagrosRePlc OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 62 }
|
|
|
|
rcKhiForwardingCbZagrosNumPools OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbZagrosEntry 63 }
|
|
|
|
rcKhiForwardingCbZagrosFpCntOPA OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Free page counter for OPA(Output Packet Assembler)"
|
|
::= { rcKhiForwardingCbZagrosEntry 64 }
|
|
|
|
rcKhiForwardingCbZagrosFpCntRPA OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Free page counter for RPA(RSP Packet Assembler)"
|
|
::= { rcKhiForwardingCbZagrosEntry 65 }
|
|
|
|
rcKhiForwardingCbZagrosFpCntFPM OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Free page counter for FPM(Free Page Manager)"
|
|
::= { rcKhiForwardingCbZagrosEntry 66 }
|
|
|
|
rcKhiForwardingCbZagrosRspPlcPktCntPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RSP PLC Peak Packet Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 67 }
|
|
|
|
rcKhiForwardingCbZagrosRspPlcPktCntCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RSP PLC Current Packet Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 68 }
|
|
|
|
rcKhiForwardingCbZagrosRePlcPktCntPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RE PLC(Replica Engine Packet Limit Count)Peak Packet Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 69 }
|
|
|
|
rcKhiForwardingCbZagrosRePlcPktCntCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RE PLC Current Packet Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 70 }
|
|
|
|
rcKhiForwardingCbZagrosShPpPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM shared pool Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 71 }
|
|
|
|
rcKhiForwardingCbZagrosShPpCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM shared pool Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 72 }
|
|
|
|
rcKhiForwardingCbZagrosEgressMultiCastPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM EgressMultiCast Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 73 }
|
|
|
|
rcKhiForwardingCbZagrosEgressMultiCastCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM EgressMultiCast Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 74 }
|
|
|
|
rcKhiForwardingCbZagrosEgressOOBPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM EgressOOB(Out Of Band) Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 75 }
|
|
|
|
rcKhiForwardingCbZagrosEgressOOBCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM EgressOOB Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 76 }
|
|
|
|
rcKhiForwardingCbZagrosIngressHeartbeatPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM IngressHeartbeat Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 77 }
|
|
|
|
rcKhiForwardingCbZagrosIngressHeartbeatCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM IngressHeartbeat Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 78 }
|
|
|
|
rcKhiForwardingCbZagrosIngressCOPInsertPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM IngressCOPInsert Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 79 }
|
|
|
|
rcKhiForwardingCbZagrosIngressCOPInsertCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM IngressCOPInsert Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 80 }
|
|
|
|
rcKhiForwardingCbZagrosIngressEfCtlPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Ingress EF/CTL(Expedited Forward/Control)Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 81 }
|
|
|
|
rcKhiForwardingCbZagrosIngressEfCtlCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Ingress EF/CTL Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 82 }
|
|
|
|
rcKhiForwardingCbZagrosIngressAfBePeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Ingress AF/BE(Assured Forwarding/Best Effort)Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 83 }
|
|
|
|
rcKhiForwardingCbZagrosIngressAfBeCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Ingress AF/BE Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 84 }
|
|
|
|
rcKhiForwardingCbZagrosEgressL2BcUcPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Egress L2BC/UC(Layer 2 Broadcast/Unicast)Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 85 }
|
|
|
|
rcKhiForwardingCbZagrosEgressL2BcUcCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Egress L2BC/UC Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 86 }
|
|
|
|
rcKhiForwardingCbZagrosEgressMirrorPeak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Egress Mirror Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 87 }
|
|
|
|
rcKhiForwardingCbZagrosEgressMirrorCurr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Egress Mirror Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 88 }
|
|
|
|
rcKhiForwardingCbZagrosPool9Peak OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Pool9 Peak Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 89 }
|
|
|
|
rcKhiForwardingCbZagrosPool9Curr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM Pool9 Current Value"
|
|
::= { rcKhiForwardingCbZagrosEntry 90 }
|
|
|
|
rcKhiForwardingCbZagrosPmmFpPlenErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM FP PLEN Error Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 91 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 0 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 92 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 1 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 93 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 2 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 94 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 3 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 95 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 4 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 96 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 5 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 97 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 6 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 98 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 7 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 99 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError8 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 8 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 100 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError9 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 9 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 101 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError10 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 10 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 102 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError11 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 11 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 103 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError12 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 12 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 104 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError13 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 13 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 105 }
|
|
|
|
rcKhiForwardingCbZagrosEFSInternalError14 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EFS Internal Error 14 Count"
|
|
::= { rcKhiForwardingCbZagrosEntry 106 }
|
|
|
|
-- KHI Forwarding Rsp table
|
|
|
|
rcKhiForwardingCbRspTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingCbRspEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Rsp Key Health Indicator MIB - All Cobalt Blue Data."
|
|
::= { rcKhiForwardingCb 5}
|
|
|
|
rcKhiForwardingCbRspEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingCbRspEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Rsp KHI - Cobalt Blue table entry."
|
|
INDEX { rcKhiForwardingCbRspIndex }
|
|
::= { rcKhiForwardingCbRspTable 1 }
|
|
|
|
RcKhiForwardingCbRspEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingCbRspIndex INTEGER,
|
|
rcKhiForwardingCbRspLsmDrops Counter64,
|
|
rcKhiForwardingCbRspExceptionDrops Counter64,
|
|
rcKhiForwardingCbRspFrameErrorDrops Counter64,
|
|
rcKhiForwardingCbRspFdibFullDrops Counter64,
|
|
rcKhiForwardingCbRspIngrMltAllPortDown Counter64,
|
|
rcKhiForwardingCbRspEgressMltAllPortDownDrops Counter64,
|
|
rcKhiForwardingCbRspEgressIpMcastRecordsNotFound Counter64,
|
|
rcKhiForwardingCbRspEgressIpMcastMltWrongPort Counter64,
|
|
rcKhiForwardingCbRspEgressIpMcastSourceKnockout Counter64,
|
|
rcKhiForwardingCbRspIngressDaNotFoundDrops Counter64,
|
|
rcKhiForwardingCbRspIngressUnknown Counter64,
|
|
rcKhiForwardingCbRspIngressDiscardDestIdDrops Counter64,
|
|
rcKhiForwardingCbRspMacLearningPacketDrops Counter64,
|
|
rcKhiForwardingCbRspIngrMltAllPortsDown Counter64,
|
|
rcKhiForwardingCbRspIngressIpmcSupressionDrops Counter64,
|
|
rcKhiForwardingCbRspUnsupportedFeatureDrops Counter64,
|
|
rcKhiForwardingCbRspAclDiscards Counter64,
|
|
rcKhiForwardingCbRspIngressIpmcLookupFails Counter64,
|
|
rcKhiForwardingCbRspIpv4DestIpLookupFails Counter64,
|
|
rcKhiForwardingCbRspIpv4SourceIpLookupFails Counter64,
|
|
rcKhiForwardingCbRspL3MirrorDrops Counter64,
|
|
rcKhiForwardingCbRspIpV6LookupFails Counter64,
|
|
rcKhiForwardingCbRspIpV6TunnelLookupV4Fails Counter64
|
|
}
|
|
|
|
rcKhiForwardingCbRspIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for CB's Forwarding Rsp Health data. There are 6
|
|
indicies reserved on a per slot basis. Depending on
|
|
the card present and the data being requested not all
|
|
indicies may be used."
|
|
::= { rcKhiForwardingCbRspEntry 1 }
|
|
|
|
rcKhiForwardingCbRspLsmDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 2 }
|
|
|
|
rcKhiForwardingCbRspExceptionDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 3 }
|
|
|
|
rcKhiForwardingCbRspFrameErrorDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 4 }
|
|
|
|
rcKhiForwardingCbRspFdibFullDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 5 }
|
|
|
|
rcKhiForwardingCbRspIngrMltAllPortDown OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 6 }
|
|
|
|
rcKhiForwardingCbRspEgressMltAllPortDownDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 7 }
|
|
|
|
rcKhiForwardingCbRspEgressIpMcastRecordsNotFound OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 8 }
|
|
|
|
rcKhiForwardingCbRspEgressIpMcastMltWrongPort OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 9 }
|
|
|
|
rcKhiForwardingCbRspEgressIpMcastSourceKnockout OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 10 }
|
|
|
|
rcKhiForwardingCbRspIngressDaNotFoundDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 11 }
|
|
|
|
rcKhiForwardingCbRspIngressUnknown OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 12 }
|
|
|
|
rcKhiForwardingCbRspIngressDiscardDestIdDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 13 }
|
|
|
|
rcKhiForwardingCbRspMacLearningPacketDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 14 }
|
|
|
|
rcKhiForwardingCbRspIngrMltAllPortsDown OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 15 }
|
|
|
|
rcKhiForwardingCbRspIngressIpmcSupressionDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 16 }
|
|
|
|
rcKhiForwardingCbRspUnsupportedFeatureDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 17 }
|
|
|
|
rcKhiForwardingCbRspAclDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 18 }
|
|
|
|
rcKhiForwardingCbRspIngressIpmcLookupFails OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 19 }
|
|
|
|
rcKhiForwardingCbRspIpv4DestIpLookupFails OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 20 }
|
|
|
|
rcKhiForwardingCbRspIpv4SourceIpLookupFails OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 21 }
|
|
|
|
rcKhiForwardingCbRspL3MirrorDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 22 }
|
|
|
|
rcKhiForwardingCbRspIpV6LookupFails OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 23 }
|
|
|
|
rcKhiForwardingCbRspIpV6TunnelLookupV4Fails OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbRspEntry 24 }
|
|
|
|
|
|
-- KHI Forwarding qe table
|
|
|
|
rcKhiForwardingCbQeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingCbQeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Qe Key Health Indicator MIB - All Cobalt Blue Data."
|
|
::= { rcKhiForwardingCb 6 }
|
|
|
|
rcKhiForwardingCbQeEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingCbQeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Qe KHI - Cobalt Blue table entry."
|
|
INDEX { rcKhiForwardingCbQeIndex }
|
|
::= { rcKhiForwardingCbQeTable 1 }
|
|
|
|
RcKhiForwardingCbQeEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingCbQeIndex INTEGER,
|
|
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt0 Counter64,
|
|
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt0 Counter64,
|
|
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt1 Counter64,
|
|
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt1 Counter64,
|
|
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt2 Counter64,
|
|
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt2 Counter64,
|
|
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt3 Counter64,
|
|
rcKhiForwardingCbQeIngressQmAgrDequeuedPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressPmSwitchPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressPmLocalPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressPmSwitchTestPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressPmLocalTestPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP0PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP0PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP1PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP1PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP2PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP2PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP3PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP3PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP4PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP4PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP5PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP5PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP6PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP6PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP7PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP7PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP8PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP8PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP9PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP9PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP10PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP10PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP11PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP11PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP12PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP12PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP13PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP13PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP14PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP14PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxP15PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxP15PktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr0RxTestPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressSr1RxTestPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressRbIdp0RequestPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressRbIdp1RequestPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressRbIdp2RequestPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressRbIdp3RequestPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressRbIdp4RequestPktCnt Counter64,
|
|
rcKhiForwardingCbQeIngressRbEnqrespPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSvPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P0TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P0TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P1TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P1TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P2TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P2TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P3TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P3TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P4TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P4TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P5TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P5TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P6TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P6TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P7TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P7TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P8TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P8TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P9TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P9TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P10TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P10TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P11TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P11TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P12TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P12TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P13TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P13TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P14TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P14TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0P15TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1P15TxPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt0TxTestPktCnt Counter64,
|
|
rcKhiForwardingCbQeEgressSt1TxTestPktCnt Counter64,
|
|
rcKhiForwardingCbQeSvPartialPktCnt Counter64,
|
|
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt0 Counter64,
|
|
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt1 Counter64,
|
|
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt2 Counter64,
|
|
rcKhiForwardingCbQeQmAgrPolicedDroppedPktCnt Counter64,
|
|
rcKhiForwardingCbQeQmAgrNonWredDroppedPktCnt Counter64,
|
|
rcKhiForwardingCbQeQmError1 Counter64
|
|
}
|
|
|
|
rcKhiForwardingCbQeIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index for CB's Forwarding Qe Health data. There are 6
|
|
indicies reserved on a per slot basis. Depending on
|
|
the card present and the data being requested not all
|
|
indicies may be used."
|
|
::= { rcKhiForwardingCbQeEntry 1 }
|
|
|
|
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 2 }
|
|
|
|
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 3 }
|
|
|
|
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 4 }
|
|
|
|
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 5 }
|
|
|
|
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 6 }
|
|
|
|
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 7 }
|
|
|
|
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 8 }
|
|
|
|
rcKhiForwardingCbQeIngressQmAgrDequeuedPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 9 }
|
|
|
|
rcKhiForwardingCbQeIngressPmSwitchPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 10 }
|
|
|
|
rcKhiForwardingCbQeIngressPmLocalPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 11 }
|
|
|
|
rcKhiForwardingCbQeIngressPmSwitchTestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 12 }
|
|
|
|
rcKhiForwardingCbQeIngressPmLocalTestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 13 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP0PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 14 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP0PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 15 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP1PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 16 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP1PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 17 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP2PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 18 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP2PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 19 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP3PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 20 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP3PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 21 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP4PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 22 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP4PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 23 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP5PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 24 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP5PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 25 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP6PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 26 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP6PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 27 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP7PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 28 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP7PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 29 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP8PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 30 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP8PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 31 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP9PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 32 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP9PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 33 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP10PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 34 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP10PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 35 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP11PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 36 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP11PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 37 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP12PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 38 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP12PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 39 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP13PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 40 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP13PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 41 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP14PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 42 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP14PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 43 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxP15PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 44 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxP15PktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 45 }
|
|
|
|
rcKhiForwardingCbQeIngressSr0RxTestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 46 }
|
|
|
|
rcKhiForwardingCbQeIngressSr1RxTestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 47 }
|
|
|
|
rcKhiForwardingCbQeIngressRbIdp0RequestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 48 }
|
|
|
|
rcKhiForwardingCbQeIngressRbIdp1RequestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 49 }
|
|
|
|
rcKhiForwardingCbQeIngressRbIdp2RequestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 50 }
|
|
|
|
rcKhiForwardingCbQeIngressRbIdp3RequestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 51 }
|
|
|
|
rcKhiForwardingCbQeIngressRbIdp4RequestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 52}
|
|
|
|
rcKhiForwardingCbQeIngressRbEnqrespPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 53 }
|
|
|
|
rcKhiForwardingCbQeEgressSvPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 54 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P0TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 55 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P0TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 56 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P1TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 57 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P1TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 58 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P2TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 59 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P2TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 60 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P3TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 61 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P3TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 62 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P4TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 63 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P4TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 64 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P5TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 65 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P5TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 66 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P6TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 67 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P6TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 68 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P7TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 69 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P7TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 70 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P8TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 71 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P8TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 72 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P9TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 73 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P9TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 74 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P10TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 75 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P10TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 76 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P11TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 77 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P11TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 78 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P12TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 79 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P12TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 80 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P13TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 81 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P13TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 82 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P14TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 83 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P14TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 84 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0P15TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 85 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1P15TxPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 86 }
|
|
|
|
rcKhiForwardingCbQeEgressSt0TxTestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 87 }
|
|
|
|
rcKhiForwardingCbQeEgressSt1TxTestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 88 }
|
|
|
|
rcKhiForwardingCbQeSvPartialPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 89 }
|
|
|
|
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 90 }
|
|
|
|
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 91 }
|
|
|
|
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 92 }
|
|
|
|
rcKhiForwardingCbQeQmAgrPolicedDroppedPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 93 }
|
|
|
|
rcKhiForwardingCbQeQmAgrNonWredDroppedPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 94 }
|
|
|
|
rcKhiForwardingCbQeQmError1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcKhiForwardingCbQeEntry 95 }
|
|
|
|
-- KHI Forwarding IFP Table
|
|
|
|
rcKhiForwardingIfpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingIfpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "Forwarding Ifp Key Health Indicator MIB - All VSP Data."
|
|
::= { rcKhiForwardingCb 7 }
|
|
|
|
rcKhiForwardingIfpEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingIfpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "Forwarding Ifp KHI - VSP table entry."
|
|
INDEX { rcKhiForwardingIfpSlot,
|
|
rcKhiForwardingIfpIndex }
|
|
::= { rcKhiForwardingIfpTable 1 }
|
|
|
|
RcKhiForwardingIfpEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingIfpSlot Integer32,
|
|
rcKhiForwardingIfpIndex Integer32,
|
|
rcKhiForwardingIfpName DisplayString,
|
|
rcKhiForwardingIfpSlice0Ports DisplayString,
|
|
rcKhiForwardingIfpSlice0Cnt Counter32,
|
|
rcKhiForwardingIfpSlice1Ports DisplayString,
|
|
rcKhiForwardingIfpSlice1Cnt Counter32,
|
|
rcKhiForwardingIfpSlice2Ports DisplayString,
|
|
rcKhiForwardingIfpSlice2Cnt Counter32
|
|
}
|
|
|
|
rcKhiForwardingIfpSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingIfpEntry 1 }
|
|
|
|
rcKhiForwardingIfpIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (3..500)
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "Index of the IFP Rule"
|
|
::= { rcKhiForwardingIfpEntry 2 }
|
|
|
|
rcKhiForwardingIfpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Name of the IFP Rule"
|
|
::= { rcKhiForwardingIfpEntry 3 }
|
|
|
|
rcKhiForwardingIfpSlice0Ports OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Range of Ports in slice0 of the slot.
|
|
Display format will have Ports 1-24 or 1-8
|
|
based on the card type"
|
|
::= { rcKhiForwardingIfpEntry 4 }
|
|
|
|
rcKhiForwardingIfpSlice0Cnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Counter for slice 0"
|
|
::= { rcKhiForwardingIfpEntry 5 }
|
|
|
|
rcKhiForwardingIfpSlice1Ports OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Range of Ports in slice1 of the slot.
|
|
Display format will have Ports 25-48 or 9-16
|
|
based on the card type"
|
|
::= { rcKhiForwardingIfpEntry 6 }
|
|
|
|
rcKhiForwardingIfpSlice1Cnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Counter for slice 1"
|
|
::= { rcKhiForwardingIfpEntry 7 }
|
|
|
|
rcKhiForwardingIfpSlice2Ports OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Range of Ports in slice2 of the slot.
|
|
Display format will have Ports 0 or 17-24
|
|
based on the card type"
|
|
::= { rcKhiForwardingIfpEntry 8 }
|
|
|
|
rcKhiForwardingIfpSlice2Cnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Counter for slice 2"
|
|
::= { rcKhiForwardingIfpEntry 9 }
|
|
|
|
-- KHI Forwarding IFP New Table
|
|
|
|
rcKhiForwardingIfpNewTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingIfpNewEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Ifp New Key Health Indicator MIB.
|
|
This table replaces the old table
|
|
rcKhiForwardingIfpTable"
|
|
::= { rcKhiForwardingCb 8 }
|
|
|
|
rcKhiForwardingIfpNewEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingIfpNewEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Ifp KHI - VSP table entry."
|
|
INDEX { rcKhiForwardingIfpNewSlot,
|
|
rcKhiForwardingIfpNewTblType,
|
|
rcKhiForwardingIfpNewIndex }
|
|
::= { rcKhiForwardingIfpNewTable 1 }
|
|
|
|
RcKhiForwardingIfpNewEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingIfpNewSlot Integer32,
|
|
rcKhiForwardingIfpNewTblType INTEGER,
|
|
rcKhiForwardingIfpNewIndex Integer32,
|
|
rcKhiForwardingIfpNewName DisplayString,
|
|
rcKhiForwardingIfpNewSlice0Ports DisplayString,
|
|
rcKhiForwardingIfpNewSlice0Cnt Counter32,
|
|
rcKhiForwardingIfpNewSlice1Ports DisplayString,
|
|
rcKhiForwardingIfpNewSlice1Cnt Counter32,
|
|
rcKhiForwardingIfpNewSlice2Ports DisplayString,
|
|
rcKhiForwardingIfpNewSlice2Cnt Counter32
|
|
}
|
|
|
|
rcKhiForwardingIfpNewSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingIfpNewEntry 1 }
|
|
|
|
rcKhiForwardingIfpNewTblType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ifpPcv(1),
|
|
ifpPcvMacInMacTagged(2),
|
|
ifpPcvMacInMacUntagged(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Type of table IFP PCV for both 1G and 10G cards.
|
|
IFP PCV MAC-in-MAC Tagged and Untagged are for 10G card"
|
|
::= { rcKhiForwardingIfpNewEntry 2 }
|
|
|
|
rcKhiForwardingIfpNewIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (3..500)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of the IFP Rule"
|
|
::= { rcKhiForwardingIfpNewEntry 3 }
|
|
|
|
rcKhiForwardingIfpNewName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the IFP Rule"
|
|
::= { rcKhiForwardingIfpNewEntry 4 }
|
|
|
|
rcKhiForwardingIfpNewSlice0Ports OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Range of Ports in slice0 of the slot.
|
|
Display format will have Ports 1-24 or 1-8
|
|
based on the card type"
|
|
::= { rcKhiForwardingIfpNewEntry 5 }
|
|
|
|
rcKhiForwardingIfpNewSlice0Cnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counter for slice 0"
|
|
::= { rcKhiForwardingIfpNewEntry 6 }
|
|
|
|
rcKhiForwardingIfpNewSlice1Ports OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Range of Ports in slice1 of the slot.
|
|
Display format will have Ports 25-48 or 9-16
|
|
based on the card type"
|
|
::= { rcKhiForwardingIfpNewEntry 7 }
|
|
|
|
rcKhiForwardingIfpNewSlice1Cnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counter for slice 1"
|
|
::= { rcKhiForwardingIfpNewEntry 8 }
|
|
|
|
rcKhiForwardingIfpNewSlice2Ports OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Range of Ports in slice2 of the slot.
|
|
Display format will have Ports 0 or 17-24
|
|
based on the card type"
|
|
::= { rcKhiForwardingIfpNewEntry 9 }
|
|
|
|
rcKhiForwardingIfpNewSlice2Cnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counter for slice 2"
|
|
::= { rcKhiForwardingIfpNewEntry 10 }
|
|
|
|
|
|
-- KHI Forwarding qe table for Rof
|
|
|
|
rcKhiForwardingRofQeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofQeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Qe Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 9 }
|
|
|
|
rcKhiForwardingRofQeEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofQeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Qe KHI - RoF."
|
|
INDEX { rcKhiForwardingRofQeSlot,
|
|
rcKhiForwardingRofQeSlice }
|
|
::= { rcKhiForwardingRofQeTable 1 }
|
|
|
|
RcKhiForwardingRofQeEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofQeSlot Integer32,
|
|
rcKhiForwardingRofQeSlice Integer32,
|
|
rcKhiForwardingRofHg0RxPkts Counter64,
|
|
rcKhiForwardingRofHg1RxPkts Counter64,
|
|
rcKhiForwardingRofHg2RxPkts Counter64,
|
|
rcKhiForwardingRofHg3RxPkts Counter64,
|
|
rcKhiForwardingRofHg0TxPkts Counter64,
|
|
rcKhiForwardingRofHg1TxPkts Counter64,
|
|
rcKhiForwardingRofHg2TxPkts Counter64,
|
|
rcKhiForwardingRofHg3TxPkts Counter64,
|
|
rcKhiForwardingRofRbIF1DropCnt Counter64,
|
|
rcKhiForwardingRofRbIF2DropCnt Counter64,
|
|
rcKhiForwardingRofRbIF3DropCnt Counter64,
|
|
rcKhiForwardingRofRbIF4DropCnt Counter64,
|
|
rcKhiForwardingRofFdPktDropCount Counter64,
|
|
rcKhiForwardingRofFrRxPktschannelA Counter64,
|
|
rcKhiForwardingRofFrRxPktschannelB Counter64,
|
|
rcKhiForwardingRofNumDP0PktsAccepted Counter64,
|
|
rcKhiForwardingRofNumDP1PktsAccepted Counter64,
|
|
rcKhiForwardingRofNumDP2PktsAccepted Counter64,
|
|
rcKhiForwardingRofNumDP3PktsAccepted Counter64,
|
|
rcKhiForwardingRofNumDP0PktsDroppedDueToWRED Counter64,
|
|
rcKhiForwardingRofNumDP1PktsDroppedDueToWRED Counter64,
|
|
rcKhiForwardingRofNumDP2PktsDroppedDueToWRED Counter64,
|
|
rcKhiForwardingRofNumDP3PktsDroppedDueToWRED Counter64,
|
|
rcKhiForwardingRofNumDP0PktsMarkedDueToWRED Counter64,
|
|
rcKhiForwardingRofNumDP1PktsMarkedDueToWRED Counter64,
|
|
rcKhiForwardingRofNumDP2PktsMarkedDueToWRED Counter64,
|
|
rcKhiForwardingRofNumDP3PktsMarkedDueToWRED Counter64,
|
|
rcKhiForwardingRofNumDP0PktsDroppedNonWRED Counter64,
|
|
rcKhiForwardingRofNumDP1PktsDroppedNonWRED Counter64,
|
|
rcKhiForwardingRofNumDP2PktsDroppedNonWRED Counter64,
|
|
rcKhiForwardingRofNumDP3PktsDroppedNonWRED Counter64,
|
|
rcKhiForwardingRofNumPktsDiscardedForBadQueNum Counter64,
|
|
rcKhiForwardingRofNumQueuesAgedOut Counter64,
|
|
rcKhiForwardingRofNumPktsDequeuedFromQM Counter64,
|
|
rcKhiForwardingRofNumHcfcMsgsDroppedDueToCRCerror Counter64
|
|
}
|
|
|
|
rcKhiForwardingRofQeSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofQeEntry 1 }
|
|
|
|
rcKhiForwardingRofQeSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofQeEntry 2 }
|
|
|
|
rcKhiForwardingRofHg0RxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts received via HiGig0"
|
|
::= { rcKhiForwardingRofQeEntry 3 }
|
|
|
|
rcKhiForwardingRofHg1RxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts received via HiGig1"
|
|
::= { rcKhiForwardingRofQeEntry 4 }
|
|
|
|
rcKhiForwardingRofHg2RxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts received via HiGig2"
|
|
::= { rcKhiForwardingRofQeEntry 5 }
|
|
|
|
rcKhiForwardingRofHg3RxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts received via HiGig3"
|
|
::= { rcKhiForwardingRofQeEntry 6 }
|
|
|
|
rcKhiForwardingRofHg0TxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts transmitted via HiGig0"
|
|
::= { rcKhiForwardingRofQeEntry 7 }
|
|
|
|
rcKhiForwardingRofHg1TxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts transmitted via HiGig1"
|
|
::= { rcKhiForwardingRofQeEntry 8 }
|
|
|
|
rcKhiForwardingRofHg2TxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts transmitted via HiGig2"
|
|
::= { rcKhiForwardingRofQeEntry 9 }
|
|
|
|
rcKhiForwardingRofHg3TxPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts transmitted via HiGig3"
|
|
::= { rcKhiForwardingRofQeEntry 10 }
|
|
|
|
rcKhiForwardingRofRbIF1DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts dropped on IF1 (HG0)"
|
|
::= { rcKhiForwardingRofQeEntry 11 }
|
|
|
|
rcKhiForwardingRofRbIF2DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts dropped on IF1 (HG1)"
|
|
::= { rcKhiForwardingRofQeEntry 12 }
|
|
|
|
rcKhiForwardingRofRbIF3DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts dropped on IF1 (HG2)"
|
|
::= { rcKhiForwardingRofQeEntry 13 }
|
|
|
|
rcKhiForwardingRofRbIF4DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts dropped on IF1 (HG3)"
|
|
::= { rcKhiForwardingRofQeEntry 14 }
|
|
|
|
rcKhiForwardingRofFdPktDropCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts dropped in FDM block"
|
|
::= { rcKhiForwardingRofQeEntry 15 }
|
|
|
|
rcKhiForwardingRofFrRxPktschannelA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts received from fabric via channel A"
|
|
::= { rcKhiForwardingRofQeEntry 16 }
|
|
|
|
rcKhiForwardingRofFrRxPktschannelB OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts received from fabric via channel B"
|
|
::= { rcKhiForwardingRofQeEntry 17 }
|
|
|
|
rcKhiForwardingRofNumDP0PktsAccepted OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP0 pkts accepted"
|
|
::= { rcKhiForwardingRofQeEntry 18 }
|
|
|
|
rcKhiForwardingRofNumDP1PktsAccepted OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP1 pkts accepted"
|
|
::= { rcKhiForwardingRofQeEntry 19 }
|
|
|
|
rcKhiForwardingRofNumDP2PktsAccepted OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP2 pkts accepted"
|
|
::= { rcKhiForwardingRofQeEntry 20 }
|
|
|
|
rcKhiForwardingRofNumDP3PktsAccepted OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP3 pkts accepted"
|
|
::= { rcKhiForwardingRofQeEntry 21 }
|
|
|
|
rcKhiForwardingRofNumDP0PktsDroppedDueToWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP0 pkts dropped due to WRED"
|
|
::= { rcKhiForwardingRofQeEntry 22 }
|
|
|
|
rcKhiForwardingRofNumDP1PktsDroppedDueToWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP1 pkts dropped due to WRED"
|
|
::= { rcKhiForwardingRofQeEntry 23 }
|
|
|
|
rcKhiForwardingRofNumDP2PktsDroppedDueToWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP2 pkts dropped due to WRED"
|
|
::= { rcKhiForwardingRofQeEntry 24 }
|
|
|
|
rcKhiForwardingRofNumDP3PktsDroppedDueToWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP3 pkts dropped due to WRED"
|
|
::= { rcKhiForwardingRofQeEntry 25 }
|
|
|
|
rcKhiForwardingRofNumDP0PktsMarkedDueToWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP0 pkts marked due to WRED"
|
|
::= { rcKhiForwardingRofQeEntry 26 }
|
|
|
|
rcKhiForwardingRofNumDP1PktsMarkedDueToWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP1 pkts marked due to WRED"
|
|
::= { rcKhiForwardingRofQeEntry 27 }
|
|
|
|
rcKhiForwardingRofNumDP2PktsMarkedDueToWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP2 pkts marked due to WRED"
|
|
::= { rcKhiForwardingRofQeEntry 28 }
|
|
|
|
rcKhiForwardingRofNumDP3PktsMarkedDueToWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP3 pkts marked due to WRED"
|
|
::= { rcKhiForwardingRofQeEntry 29 }
|
|
|
|
rcKhiForwardingRofNumDP0PktsDroppedNonWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP0 pkts dropped non-WRED"
|
|
::= { rcKhiForwardingRofQeEntry 30 }
|
|
|
|
rcKhiForwardingRofNumDP1PktsDroppedNonWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP1 pkts dropped non-WRED"
|
|
::= { rcKhiForwardingRofQeEntry 31 }
|
|
|
|
rcKhiForwardingRofNumDP2PktsDroppedNonWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP2 pkts dropped non-WRED"
|
|
::= { rcKhiForwardingRofQeEntry 32 }
|
|
|
|
rcKhiForwardingRofNumDP3PktsDroppedNonWRED OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP3 pkts dropped non-WRED"
|
|
::= { rcKhiForwardingRofQeEntry 33 }
|
|
|
|
rcKhiForwardingRofNumPktsDiscardedForBadQueNum OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts dropped due to bad queue num"
|
|
::= { rcKhiForwardingRofQeEntry 34 }
|
|
|
|
rcKhiForwardingRofNumQueuesAgedOut OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "queues deleted due age"
|
|
::= { rcKhiForwardingRofQeEntry 35 }
|
|
|
|
rcKhiForwardingRofNumPktsDequeuedFromQM OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts QM dequeued"
|
|
::= { rcKhiForwardingRofQeEntry 36 }
|
|
|
|
rcKhiForwardingRofNumHcfcMsgsDroppedDueToCRCerror OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "msgs dropped due to CRC error"
|
|
::= { rcKhiForwardingRofQeEntry 37 }
|
|
|
|
|
|
-- KHI Forwarding table for Rof RSP Forw stats
|
|
|
|
rcKhiForwardingRofRspForwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofRspForwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding RSP Stats Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 21 }
|
|
|
|
rcKhiForwardingRofRspForwEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofRspForwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding RSP Stats KHI - RoF."
|
|
INDEX { rcKhiForwardingRofRspForwSlot,
|
|
rcKhiForwardingRofRspForwSlice,
|
|
rcKhiForwardingRofRspForwReg }
|
|
::= { rcKhiForwardingRofRspForwTable 1 }
|
|
|
|
RcKhiForwardingRofRspForwEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofRspForwSlot Integer32,
|
|
rcKhiForwardingRofRspForwSlice Integer32,
|
|
rcKhiForwardingRofRspForwReg Integer32,
|
|
rcKhiForwardingRofRspForwHab0RxPktCounterReg Counter64,
|
|
rcKhiForwardingRofRspForwHab0TxPktCounterReg Counter64,
|
|
rcKhiForwardingRofRspForwHab1RxPktCounterReg Counter64,
|
|
rcKhiForwardingRofRspForwHab1TxPktCounterReg Counter64,
|
|
rcKhiForwardingRofRspForwCif0RxPktCntReg Counter64,
|
|
rcKhiForwardingRofRspForwCif0TxPktCntReg Counter64,
|
|
rcKhiForwardingRofRspForwCif1RxPktCntReg Counter64,
|
|
rcKhiForwardingRofRspForwCif1TxPktCntReg Counter64,
|
|
rcKhiForwardingRofRspForwPbmHab0RxPktCntReg Counter64,
|
|
rcKhiForwardingRofRspForwPbmHab0TxPktCntReg Counter64,
|
|
rcKhiForwardingRofRspForwPbmHab1RxPktCntReg Counter64,
|
|
rcKhiForwardingRofRspForwPbmHab1TxPktCntReg Counter64,
|
|
rcKhiForwardingRofRspForwPbmHab0Hab1SopEopCntReg Counter64,
|
|
rcKhiForwardingRofRspForwSamPackletInCntReg Counter64,
|
|
rcKhiForwardingRofRspForwSamPackletOutCntReg Counter64,
|
|
rcKhiForwardingRofRspForwAmPaGabPackletInReg Counter64,
|
|
rcKhiForwardingRofRspForwAmPrGabPacketOutReg Counter64,
|
|
rcKhiForwardingRofRspForwSamAe0GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamAe0GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamAe1GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamAe1GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamAe2GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamAe2GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamAe3GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamAe3GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamR6Le0GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamR6Le0GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamR6Le1GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamR6Le1GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamR6Le2GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamR6Le2GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamR6Le3GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamR6Le3GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamR5LeGabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamR5LeGabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamCifGabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamCifGabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSanHle0GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSanHle0GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwSamAlseGabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwSamAlseGabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmAe0GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmAe0GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmAe1GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmAe1GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmAe2GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmAe2GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmAe3GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmAe3GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmR6Le0GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmR6Le0GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmR6Le1GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmR6Le1GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmR6Le2GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmR6Le2GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmR6Le3GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmR6Le3GabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmR5LeGabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmR5LeGabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmCifGabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmCifGabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmAlseGabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmAlseGabTransRegRx Counter64,
|
|
rcKhiForwardingRofRspForwAmHle0GabTransRegTx Counter64,
|
|
rcKhiForwardingRofRspForwAmHle0GabTransRegRx Counter64
|
|
}
|
|
|
|
|
|
rcKhiForwardingRofRspForwSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofRspForwEntry 1 }
|
|
|
|
rcKhiForwardingRofRspForwSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofRspForwEntry 2 }
|
|
|
|
rcKhiForwardingRofRspForwReg OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Reg"
|
|
::= { rcKhiForwardingRofRspForwEntry 3 }
|
|
|
|
rcKhiForwardingRofRspForwHab0RxPktCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB0_RX_PACKET_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 4 }
|
|
|
|
rcKhiForwardingRofRspForwHab0TxPktCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB0_TX_PACKET_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 5 }
|
|
|
|
rcKhiForwardingRofRspForwHab1RxPktCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB1_RX_PACKET_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 6 }
|
|
|
|
rcKhiForwardingRofRspForwHab1TxPktCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB1_TX_PACKET_COUNTER_RE"
|
|
::= { rcKhiForwardingRofRspForwEntry 7 }
|
|
|
|
rcKhiForwardingRofRspForwCif0RxPktCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF0_RX_PACKET_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 8 }
|
|
|
|
rcKhiForwardingRofRspForwCif0TxPktCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF0_TX_PACKET_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 9 }
|
|
|
|
rcKhiForwardingRofRspForwCif1RxPktCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF1_RX_PACKET_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 10 }
|
|
|
|
rcKhiForwardingRofRspForwCif1TxPktCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF1_TX_PACKET_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 11 }
|
|
|
|
rcKhiForwardingRofRspForwPbmHab0RxPktCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBM_HAB0_RX_PACKLET_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 12 }
|
|
|
|
rcKhiForwardingRofRspForwPbmHab0TxPktCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBM_HAB0_TX_PACKLET_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 13 }
|
|
|
|
rcKhiForwardingRofRspForwPbmHab1RxPktCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBM_HAB1_RX_PACKLET_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 14 }
|
|
|
|
rcKhiForwardingRofRspForwPbmHab1TxPktCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBM_HAB1_TX_PACKLET_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 15 }
|
|
|
|
rcKhiForwardingRofRspForwPbmHab0Hab1SopEopCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " PBM_HAB0_HAB1_SOP_EOP_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 16 }
|
|
|
|
rcKhiForwardingRofRspForwSamPackletInCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_PACKLET_IN_COUNTS_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 17 }
|
|
|
|
rcKhiForwardingRofRspForwSamPackletOutCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_PACKLET_OUT_COUNTS_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 18 }
|
|
|
|
rcKhiForwardingRofRspForwSamAe0GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_AE0GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 19 }
|
|
|
|
rcKhiForwardingRofRspForwSamAe0GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_AE0GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 20 }
|
|
|
|
rcKhiForwardingRofRspForwSamAe1GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_AE1GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 21 }
|
|
|
|
rcKhiForwardingRofRspForwSamAe1GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_AE1GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 22 }
|
|
|
|
rcKhiForwardingRofRspForwSamAe2GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_AE2GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 23 }
|
|
|
|
rcKhiForwardingRofRspForwSamAe2GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_AE2GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 24 }
|
|
|
|
rcKhiForwardingRofRspForwSamAe3GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_AE3GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 25 }
|
|
|
|
rcKhiForwardingRofRspForwSamAe3GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_AE3GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 26 }
|
|
|
|
rcKhiForwardingRofRspForwSamR6Le0GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R6LE0GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 27 }
|
|
|
|
rcKhiForwardingRofRspForwSamR6Le0GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R6LE0GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 28 }
|
|
|
|
rcKhiForwardingRofRspForwSamR6Le1GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R6LE1GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 29 }
|
|
|
|
rcKhiForwardingRofRspForwSamR6Le1GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R6LE1GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 30 }
|
|
|
|
rcKhiForwardingRofRspForwSamR6Le2GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R6LE2GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 31 }
|
|
|
|
rcKhiForwardingRofRspForwSamR6Le2GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R6LE2GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 32 }
|
|
|
|
rcKhiForwardingRofRspForwSamR6Le3GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R6LE3GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 33 }
|
|
|
|
rcKhiForwardingRofRspForwSamR6Le3GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R6LE3GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 34 }
|
|
|
|
rcKhiForwardingRofRspForwSamR5LeGabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R5LEGAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 35 }
|
|
|
|
rcKhiForwardingRofRspForwSamR5LeGabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_R5LEGAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 36 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwSamCifGabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_CIFGAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 37 }
|
|
|
|
rcKhiForwardingRofRspForwSamCifGabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_CIFGAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 38 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwSanHle0GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_HLE0GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 39 }
|
|
|
|
rcKhiForwardingRofRspForwSanHle0GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_HLE0GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 40 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwSamAlseGabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_ALSEGAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 41 }
|
|
|
|
rcKhiForwardingRofRspForwSamAlseGabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_ALSEGAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 42 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwAmPaGabPackletInReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_PAGAB_PACKLET_IN_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 43 }
|
|
|
|
rcKhiForwardingRofRspForwAmPrGabPacketOutReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_PRGAB_PACKLET_OUT_REG"
|
|
::= { rcKhiForwardingRofRspForwEntry 44 }
|
|
|
|
rcKhiForwardingRofRspForwAmAe0GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_AE0GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 45 }
|
|
|
|
rcKhiForwardingRofRspForwAmAe0GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_AE0GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 46 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwAmAe1GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_AE1GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 47 }
|
|
|
|
rcKhiForwardingRofRspForwAmAe1GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_AE1GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 48 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwAmAe2GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_AE2GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 49 }
|
|
|
|
rcKhiForwardingRofRspForwAmAe2GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_AE2GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 50 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwAmAe3GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_AE3GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 51 }
|
|
|
|
rcKhiForwardingRofRspForwAmAe3GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_AE3GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 52 }
|
|
|
|
rcKhiForwardingRofRspForwAmR6Le0GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R6LE0GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 53 }
|
|
|
|
rcKhiForwardingRofRspForwAmR6Le0GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R6LE0GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 54 }
|
|
|
|
rcKhiForwardingRofRspForwAmR6Le1GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R6LE1GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 55 }
|
|
|
|
rcKhiForwardingRofRspForwAmR6Le1GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R6LE1GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 56 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwAmR6Le2GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R6LE2GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 57 }
|
|
|
|
rcKhiForwardingRofRspForwAmR6Le2GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R6LE2GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 58 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwAmR6Le3GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R6LE3GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 59 }
|
|
|
|
rcKhiForwardingRofRspForwAmR6Le3GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R6LE3GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 60 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwAmR5LeGabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R5LEGAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 61 }
|
|
|
|
rcKhiForwardingRofRspForwAmR5LeGabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_R5LEGAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 62 }
|
|
|
|
rcKhiForwardingRofRspForwAmCifGabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_CIFGAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 63 }
|
|
|
|
rcKhiForwardingRofRspForwAmCifGabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_CIFGAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 64 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwAmAlseGabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_ALSEGAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 65 }
|
|
|
|
rcKhiForwardingRofRspForwAmAlseGabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_ALSEGAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 66 }
|
|
|
|
|
|
rcKhiForwardingRofRspForwAmHle0GabTransRegTx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_HLE0GAB_TRANSACTIONS_REG_TX"
|
|
::= { rcKhiForwardingRofRspForwEntry 67 }
|
|
|
|
rcKhiForwardingRofRspForwAmHle0GabTransRegRx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_HLE0GAB_TRANSACTIONS_REG_RX"
|
|
::= { rcKhiForwardingRofRspForwEntry 68 }
|
|
|
|
|
|
-- KHI Forwarding table for Rof RSP Drop stats
|
|
|
|
rcKhiForwardingRofRspDropTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofRspDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Drop RSP Stats Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 22 }
|
|
|
|
rcKhiForwardingRofRspDropEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofRspDropEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding RSP Stats KHI - RoF."
|
|
INDEX { rcKhiForwardingRofRspDropSlot,
|
|
rcKhiForwardingRofRspDropSlice,
|
|
rcKhiForwardingRofRspDropReg }
|
|
::= { rcKhiForwardingRofRspDropTable 1 }
|
|
|
|
RcKhiForwardingRofRspDropEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofRspDropSlot Integer32,
|
|
rcKhiForwardingRofRspDropSlice Integer32,
|
|
rcKhiForwardingRofRspDropReg Integer32,
|
|
rcKhiForwardingRofRspDropHab0RxErrCounterReg Counter64,
|
|
rcKhiForwardingRofRspDropHab1RxErrCounterReg Counter64,
|
|
rcKhiForwardingRofRspDropCif0RxErrCounterReg Counter64,
|
|
rcKhiForwardingRofRspDropCif1RxErrCounterReg Counter64,
|
|
rcKhiForwardingRofRspDropGsFloodingMeterRead Counter64,
|
|
rcKhiForwardingRofRspDropGsMacLkupErrDA Counter64,
|
|
rcKhiForwardingRofRspDropGsFilterActDeny Counter64,
|
|
rcKhiForwardingRofRspDropGsIstDstNni Counter64,
|
|
rcKhiForwardingRofRspDropGsSrcMacLkup Counter64,
|
|
rcKhiForwardingRofRspDropGsUnknownSA Counter64,
|
|
rcKhiForwardingRofRspDropGsDstMacLkup Counter64,
|
|
rcKhiForwardingRofRspDropGsSrcKnockOut Counter64,
|
|
rcKhiForwardingRofRspDropGsNoUniNniMem Counter64,
|
|
rcKhiForwardingRofRspDropGsIstNoUniMem Counter64,
|
|
rcKhiForwardingRofRspDropGsCidDiscard Counter64,
|
|
rcKhiForwardingRofRspDropGsLrnDisableUnkwnSA Counter64,
|
|
rcKhiForwardingRofRspDropGsInstMemParityExp Counter64,
|
|
rcKhiForwardingRofRspDropGsPcOver4095Exp Counter64,
|
|
rcKhiForwardingRofRspDropGsPackletActiveExp Counter64,
|
|
rcKhiForwardingRofRspDropGsNonAlignedAddrExp Counter64,
|
|
rcKhiForwardingRofRspDropGsIllegalRegionExp Counter64,
|
|
rcKhiForwardingRofRspDropGsSplitOperActiveExp Counter64,
|
|
rcKhiForwardingRofRspDropGsSplitOperNotDoneExp Counter64,
|
|
rcKhiForwardingRofRspDropGsGabTimeoutExp Counter64,
|
|
rcKhiForwardingRofRspDropGsInvalidOptypeExp Counter64,
|
|
rcKhiForwardingRofRspDropGsIllegalArgExp Counter64,
|
|
rcKhiForwardingRofRspDropGsEccErrorExp Counter64,
|
|
rcKhiForwardingRofRspDropGsSearchError Counter64,
|
|
rcKhiForwardingRofRspDropGsRadixSearchRunOnExp Counter64,
|
|
rcKhiForwardingRofRspDropGsSearchMgmtError Counter64,
|
|
rcKhiForwardingRofRspDropGsHwFailureExp Counter64,
|
|
rcKhiForwardingRofRspDropGsDontKnowExp Counter64,
|
|
rcKhiForwardingRofRspDropGsMacLkupErrSA Counter64,
|
|
rcKhiForwardingRofRspDropGsIpv4OcsErr Counter64,
|
|
rcKhiForwardingRofRspDropGsIsidLkupFail Counter64,
|
|
rcKhiForwardingRofRspDropGsNniDstSpbDrop Counter64,
|
|
rcKhiForwardingRofRspDropGsNniIstExtraUniCpy Counter64,
|
|
rcKhiForwardingRofRspDropGsNniUnkwNBDA Counter64,
|
|
rcKhiForwardingRofRspDropGsNNiIstDown Counter64,
|
|
rcKhiForwardingRofRspDropGsPackletErr Counter64,
|
|
rcKhiForwardingRofRspDropGsIsidLkupMiss Counter64,
|
|
rcKhiForwardingRofRspDropGsNniIstPeerUpBvid2Drop Counter64,
|
|
rcKhiForwardingRofRspDropGsUnknownMcastBda Counter64,
|
|
rcKhiForwardingRofRspDropGsNniCfmDrop Counter64,
|
|
rcKhiForwardingRofRspDropGsIpNotEnDrop Counter64,
|
|
rcKhiForwardingRofRspDropGsIpv6LkupFail Counter64,
|
|
rcKhiForwardingRofRspDropGsIpv6OcsErr Counter64,
|
|
rcKhiForwardingRofRspDropGsIpmcV4Drop Counter64,
|
|
rcKhiForwardingRofRspDropGsV4LkupDrop Counter64
|
|
}
|
|
|
|
rcKhiForwardingRofRspDropSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofRspDropEntry 1 }
|
|
|
|
rcKhiForwardingRofRspDropSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofRspDropEntry 2 }
|
|
|
|
rcKhiForwardingRofRspDropReg OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Reg"
|
|
::= { rcKhiForwardingRofRspDropEntry 3 }
|
|
|
|
rcKhiForwardingRofRspDropHab0RxErrCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB0_RX_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspDropEntry 4 }
|
|
|
|
rcKhiForwardingRofRspDropHab1RxErrCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB1_RX_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspDropEntry 5 }
|
|
|
|
rcKhiForwardingRofRspDropCif0RxErrCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF0_RX_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspDropEntry 6 }
|
|
|
|
rcKhiForwardingRofRspDropCif1RxErrCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF1_RX_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspDropEntry 7 }
|
|
|
|
rcKhiForwardingRofRspDropGsFloodingMeterRead OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_FLOODING_METER_RED"
|
|
::= { rcKhiForwardingRofRspDropEntry 8 }
|
|
|
|
rcKhiForwardingRofRspDropGsMacLkupErrDA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_MAC_LKUP_ERR_DA"
|
|
::= { rcKhiForwardingRofRspDropEntry 9 }
|
|
|
|
rcKhiForwardingRofRspDropGsFilterActDeny OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_FILTER_ACT_DENY"
|
|
::= { rcKhiForwardingRofRspDropEntry 10 }
|
|
|
|
rcKhiForwardingRofRspDropGsIstDstNni OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_IST_DST_NNI"
|
|
::= { rcKhiForwardingRofRspDropEntry 11 }
|
|
|
|
rcKhiForwardingRofRspDropGsSrcMacLkup OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_SRC_MAC_LKUP"
|
|
::= { rcKhiForwardingRofRspDropEntry 12 }
|
|
|
|
rcKhiForwardingRofRspDropGsUnknownSA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_UNKNOWN_SA"
|
|
::= { rcKhiForwardingRofRspDropEntry 13 }
|
|
|
|
rcKhiForwardingRofRspDropGsDstMacLkup OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_DST_MAC_LKUP"
|
|
::= { rcKhiForwardingRofRspDropEntry 14 }
|
|
|
|
rcKhiForwardingRofRspDropGsSrcKnockOut OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_SRC_KNOCK_OUT"
|
|
::= { rcKhiForwardingRofRspDropEntry 15 }
|
|
|
|
rcKhiForwardingRofRspDropGsNoUniNniMem OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_NO_UNI_NNI_MEM"
|
|
::= { rcKhiForwardingRofRspDropEntry 16 }
|
|
|
|
rcKhiForwardingRofRspDropGsIstNoUniMem OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_IST_NO_UNI_MEM"
|
|
::= { rcKhiForwardingRofRspDropEntry 17 }
|
|
|
|
rcKhiForwardingRofRspDropGsCidDiscard OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_CID_DISCARD"
|
|
::= { rcKhiForwardingRofRspDropEntry 18 }
|
|
|
|
rcKhiForwardingRofRspDropGsLrnDisableUnkwnSA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_LRN_DISABLE_UNKWN_SA"
|
|
::= { rcKhiForwardingRofRspDropEntry 19 }
|
|
|
|
rcKhiForwardingRofRspDropGsInstMemParityExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_INST_MEM_PARITY_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 20 }
|
|
|
|
rcKhiForwardingRofRspDropGsPcOver4095Exp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_PC_OVER_4095_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 21 }
|
|
|
|
rcKhiForwardingRofRspDropGsPackletActiveExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_PACKLET_ACTIVE_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 22 }
|
|
|
|
rcKhiForwardingRofRspDropGsNonAlignedAddrExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_NON_ALIGNED_ADDR_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 23 }
|
|
|
|
rcKhiForwardingRofRspDropGsIllegalRegionExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_ILLEGAL_REGION_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 24 }
|
|
|
|
rcKhiForwardingRofRspDropGsSplitOperActiveExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_SPLIT_OPER_ACTIVE_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 25 }
|
|
|
|
rcKhiForwardingRofRspDropGsSplitOperNotDoneExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_SPLIT_OPER_NOT_DONE_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 26 }
|
|
|
|
rcKhiForwardingRofRspDropGsGabTimeoutExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_GAB_TIMEOUT_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 27 }
|
|
|
|
rcKhiForwardingRofRspDropGsInvalidOptypeExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_INVALID_OPTYPE_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 28 }
|
|
|
|
rcKhiForwardingRofRspDropGsIllegalArgExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_ILLEGAL_ARG_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 29 }
|
|
|
|
rcKhiForwardingRofRspDropGsEccErrorExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_ECC_ERROR_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 30 }
|
|
|
|
rcKhiForwardingRofRspDropGsSearchError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_SERCH_ERROR"
|
|
::= { rcKhiForwardingRofRspDropEntry 31 }
|
|
|
|
rcKhiForwardingRofRspDropGsRadixSearchRunOnExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_RADIX_SEARCH_RUN_ON_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 32 }
|
|
|
|
rcKhiForwardingRofRspDropGsSearchMgmtError OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_SEARCH_MGMT_ERROR"
|
|
::= { rcKhiForwardingRofRspDropEntry 33}
|
|
|
|
rcKhiForwardingRofRspDropGsHwFailureExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_HW_FAILURE_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 34}
|
|
|
|
rcKhiForwardingRofRspDropGsDontKnowExp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_DONT_KNOW_EXP"
|
|
::= { rcKhiForwardingRofRspDropEntry 35}
|
|
|
|
rcKhiForwardingRofRspDropGsMacLkupErrSA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_MAC_LKUP_ERR_SA"
|
|
::= { rcKhiForwardingRofRspDropEntry 36}
|
|
|
|
rcKhiForwardingRofRspDropGsIpv4OcsErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_IPV4_OCS_ERR"
|
|
::= { rcKhiForwardingRofRspDropEntry 37}
|
|
|
|
rcKhiForwardingRofRspDropGsIsidLkupFail OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_ISID_LKUP_FAIL"
|
|
::= { rcKhiForwardingRofRspDropEntry 38}
|
|
|
|
rcKhiForwardingRofRspDropGsNniDstSpbDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_NNI_DST_SPB_DROP"
|
|
::= { rcKhiForwardingRofRspDropEntry 39}
|
|
|
|
rcKhiForwardingRofRspDropGsNniIstExtraUniCpy OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_NNI_IST_EXTRA_UNI_CPY"
|
|
::= { rcKhiForwardingRofRspDropEntry 40}
|
|
|
|
rcKhiForwardingRofRspDropGsNniUnkwNBDA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_NNI_UNKNOWN_BDA"
|
|
::= { rcKhiForwardingRofRspDropEntry 41}
|
|
|
|
rcKhiForwardingRofRspDropGsNNiIstDown OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_NNI_IST_DOWN"
|
|
::= { rcKhiForwardingRofRspDropEntry 42}
|
|
|
|
rcKhiForwardingRofRspDropGsPackletErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_PACKLET_ERR"
|
|
::= { rcKhiForwardingRofRspDropEntry 43}
|
|
|
|
rcKhiForwardingRofRspDropGsIsidLkupMiss OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_ISID_LKUP_MISS"
|
|
::= { rcKhiForwardingRofRspDropEntry 44}
|
|
|
|
rcKhiForwardingRofRspDropGsNniIstPeerUpBvid2Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_NNI_IST_PEER_UP_BVID2_DROP"
|
|
::= { rcKhiForwardingRofRspDropEntry 45}
|
|
|
|
rcKhiForwardingRofRspDropGsUnknownMcastBda OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_UNKNOWN_MCAST_BDA"
|
|
::= { rcKhiForwardingRofRspDropEntry 46}
|
|
|
|
rcKhiForwardingRofRspDropGsNniCfmDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_NNI_CFM_DROP"
|
|
::= { rcKhiForwardingRofRspDropEntry 47}
|
|
|
|
rcKhiForwardingRofRspDropGsIpNotEnDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_IP_NOT_EN_DROP"
|
|
::= { rcKhiForwardingRofRspDropEntry 48}
|
|
|
|
rcKhiForwardingRofRspDropGsIpv6LkupFail OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_IPV6_LKUP_FAIL"
|
|
::= { rcKhiForwardingRofRspDropEntry 49}
|
|
|
|
rcKhiForwardingRofRspDropGsIpv6OcsErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_IPV6_OCS_ERR"
|
|
::= { rcKhiForwardingRofRspDropEntry 50}
|
|
|
|
rcKhiForwardingRofRspDropGsIpmcV4Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_IPMC_V4_DROP"
|
|
::= { rcKhiForwardingRofRspDropEntry 51}
|
|
|
|
rcKhiForwardingRofRspDropGsV4LkupDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "GS_V4_LKUP_DROP"
|
|
::= { rcKhiForwardingRofRspDropEntry 52}
|
|
|
|
|
|
-- KHI Forwarding table for Rof RSP Status stats
|
|
|
|
rcKhiForwardingRofRspStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofRspStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Status RSP Stats Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 23 }
|
|
|
|
rcKhiForwardingRofRspStatusEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofRspStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding RSP Stats KHI - RoF."
|
|
INDEX { rcKhiForwardingRofRspStatusSlot,
|
|
rcKhiForwardingRofRspStatusSlice,
|
|
rcKhiForwardingRofRspStatusReg }
|
|
::= { rcKhiForwardingRofRspStatusTable 1 }
|
|
|
|
RcKhiForwardingRofRspStatusEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofRspStatusSlot Integer32,
|
|
rcKhiForwardingRofRspStatusSlice Integer32,
|
|
rcKhiForwardingRofRspStatusReg Integer32,
|
|
rcKhiForwardingRofRspStatusDeviceIdReg Counter64,
|
|
rcKhiForwardingRofRspStatusPllStatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusEdi0StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusEdi1StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusEdi2StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusEdi3StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusEdi4StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusEdi5StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusAeStatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusAlse0StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusHab0StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusHab1StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusCif0StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusCif1StatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusHleStatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusPbmStatusReg Counter64,
|
|
rcKhiForwardingRofRspStatusSamThreadActive0Reg Counter64,
|
|
rcKhiForwardingRofRspStatusSamThreadActive1Reg Counter64,
|
|
rcKhiForwardingRofRspStatusSamThreadActive2Reg Counter64,
|
|
rcKhiForwardingRofRspStatusSamThreadActive3Reg Counter64,
|
|
rcKhiForwardingRofRspStatusSamThreadActive4Reg Counter64,
|
|
rcKhiForwardingRofRspStatusSamThreadActive5Reg Counter64,
|
|
rcKhiForwardingRofRspStatusSamThreadActive6Reg Counter64,
|
|
rcKhiForwardingRofRspStatusSamThreadActive7Reg Counter64,
|
|
rcKhiForwardingRofRspStatusSamThreadCountReg Counter64,
|
|
rcKhiForwardingRofRspStatusAmPcGabPbmThreadStartsReg Counter64,
|
|
rcKhiForwardingRofRspStatusAmPcGabBkgrdThreadReg Counter64,
|
|
rcKhiForwardingRofRspStatusAmThreadActiveReg Counter64,
|
|
rcKhiForwardingRofRspStatusAmThreadCountReg Counter64
|
|
}
|
|
|
|
rcKhiForwardingRofRspStatusSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofRspStatusEntry 1 }
|
|
|
|
rcKhiForwardingRofRspStatusSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofRspStatusEntry 2 }
|
|
|
|
rcKhiForwardingRofRspStatusReg OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Reg"
|
|
::= { rcKhiForwardingRofRspStatusEntry 3 }
|
|
|
|
rcKhiForwardingRofRspStatusDeviceIdReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DEVICE_ID_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 4}
|
|
|
|
rcKhiForwardingRofRspStatusPllStatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PLL_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 5}
|
|
|
|
rcKhiForwardingRofRspStatusEdi0StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EDI0_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 6}
|
|
|
|
rcKhiForwardingRofRspStatusEdi1StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EDI1_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 7}
|
|
|
|
rcKhiForwardingRofRspStatusEdi2StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EDI2_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 8}
|
|
|
|
rcKhiForwardingRofRspStatusEdi3StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EDI3_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 9}
|
|
|
|
rcKhiForwardingRofRspStatusEdi4StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EDI4_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 10 }
|
|
|
|
rcKhiForwardingRofRspStatusEdi5StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EDI5_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 11 }
|
|
|
|
rcKhiForwardingRofRspStatusAeStatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AE_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 12 }
|
|
|
|
rcKhiForwardingRofRspStatusAlse0StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ALSE0_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 13 }
|
|
|
|
rcKhiForwardingRofRspStatusHab0StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB0_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 14 }
|
|
|
|
rcKhiForwardingRofRspStatusHab1StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB1_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 15 }
|
|
|
|
rcKhiForwardingRofRspStatusCif0StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF0_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 16 }
|
|
|
|
rcKhiForwardingRofRspStatusCif1StatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF1_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 17 }
|
|
|
|
rcKhiForwardingRofRspStatusHleStatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HLE_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 18 }
|
|
|
|
rcKhiForwardingRofRspStatusPbmStatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBM_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 19 }
|
|
|
|
rcKhiForwardingRofRspStatusSamThreadActive0Reg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_THREAD_ACTIVE0_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 20 }
|
|
|
|
rcKhiForwardingRofRspStatusSamThreadActive1Reg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_THREAD_ACTIVE1_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 21 }
|
|
|
|
rcKhiForwardingRofRspStatusSamThreadActive2Reg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_THREAD_ACTIVE2_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 22 }
|
|
|
|
rcKhiForwardingRofRspStatusSamThreadActive3Reg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_THREAD_ACTIVE3_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 23 }
|
|
|
|
rcKhiForwardingRofRspStatusSamThreadActive4Reg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_THREAD_ACTIVE4_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 24 }
|
|
|
|
rcKhiForwardingRofRspStatusSamThreadActive5Reg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_THREAD_ACTIVE5_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 25 }
|
|
|
|
rcKhiForwardingRofRspStatusSamThreadActive6Reg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_THREAD_ACTIVE6_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 26 }
|
|
|
|
rcKhiForwardingRofRspStatusSamThreadActive7Reg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_THREAD_ACTIVE7_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 27 }
|
|
|
|
rcKhiForwardingRofRspStatusSamThreadCountReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SAM_THREAD_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 28 }
|
|
|
|
rcKhiForwardingRofRspStatusAmPcGabPbmThreadStartsReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_PCGAB_PBM_THREAD_STARTS_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 29 }
|
|
|
|
rcKhiForwardingRofRspStatusAmPcGabBkgrdThreadReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_PCGAB_BACKGROUND_THREAD_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 30 }
|
|
|
|
rcKhiForwardingRofRspStatusAmThreadActiveReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_THREAD_ACTIVE_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 31 }
|
|
|
|
rcKhiForwardingRofRspStatusAmThreadCountReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "AM_THREAD_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspStatusEntry 32 }
|
|
|
|
|
|
|
|
-- KHI Forwarding table for Rof RSP Error stats
|
|
|
|
rcKhiForwardingRofRspErrorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofRspErrorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Status RSP Stats Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 24 }
|
|
|
|
rcKhiForwardingRofRspErrorEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofRspErrorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding RSP Stats KHI - RoF."
|
|
INDEX { rcKhiForwardingRofRspErrorSlot,
|
|
rcKhiForwardingRofRspErrorSlice,
|
|
rcKhiForwardingRofRspErrorReg }
|
|
::= { rcKhiForwardingRofRspErrorTable 1 }
|
|
|
|
RcKhiForwardingRofRspErrorEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofRspErrorSlot Integer32,
|
|
rcKhiForwardingRofRspErrorSlice Integer32,
|
|
rcKhiForwardingRofRspErrorReg Integer32,
|
|
rcKhiForwardingRofRspErrorHifErrorStatusReg Counter64,
|
|
rcKhiForwardingRofRspErrorHab0ErrorStatusReg Counter64,
|
|
rcKhiForwardingRofRspErrorHab1ErrorStatusReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi0EccSoftErrorCntReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi1EccSoftErrorCntReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi2EccSoftErrorCntReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi3EccSoftErrorCntReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi4EccSoftErrorCntReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi5EccSoftErrorCntReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi0EccErrorCounterReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi1EccErrorCounterReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi2EccErrorCounterReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi3EccErrorCounterReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi4EccErrorCounterReg Counter64,
|
|
rcKhiForwardingRofRspErrorErdi5EccErrorCounterReg Counter64,
|
|
rcKhiForwardingRofRspErrorCif0DropInfoReg Counter64,
|
|
rcKhiForwardingRofRspErrorCif1DropInfoReg Counter64,
|
|
rcKhiForwardingRofRspErrorHab0DropInfoReg Counter64,
|
|
rcKhiForwardingRofRspErrorHab1DropInfoReg Counter64
|
|
}
|
|
|
|
|
|
rcKhiForwardingRofRspErrorSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofRspErrorEntry 1 }
|
|
|
|
rcKhiForwardingRofRspErrorSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofRspErrorEntry 2 }
|
|
|
|
rcKhiForwardingRofRspErrorReg OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Reg"
|
|
::= { rcKhiForwardingRofRspErrorEntry 3 }
|
|
|
|
rcKhiForwardingRofRspErrorHifErrorStatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HIF_ERROR_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 4 }
|
|
|
|
rcKhiForwardingRofRspErrorHab0ErrorStatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB0_ERROR_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 5 }
|
|
|
|
rcKhiForwardingRofRspErrorHab1ErrorStatusReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB1_ERROR_STATUS_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 6 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi0EccSoftErrorCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI0_ECC_SOFT_ERROR_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 7 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi1EccSoftErrorCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI1_ECC_SOFT_ERROR_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 8 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi2EccSoftErrorCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI2_ECC_SOFT_ERROR_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 9 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi3EccSoftErrorCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI3_ECC_SOFT_ERROR_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 10 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi4EccSoftErrorCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI4_ECC_SOFT_ERROR_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 11 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi5EccSoftErrorCntReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI4_ECC_SOFT_ERROR_COUNT_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 12 }
|
|
|
|
|
|
rcKhiForwardingRofRspErrorErdi0EccErrorCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI0_ECC_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 13 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi1EccErrorCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI1_ECC_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 14 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi2EccErrorCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI2_ECC_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 15 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi3EccErrorCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI3_ECC_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 16 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi4EccErrorCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI4_ECC_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 17 }
|
|
|
|
rcKhiForwardingRofRspErrorErdi5EccErrorCounterReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ERDI5_ECC_ERROR_COUNTER_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 18 }
|
|
|
|
rcKhiForwardingRofRspErrorCif0DropInfoReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF0_DROP_INFO_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 19 }
|
|
|
|
rcKhiForwardingRofRspErrorCif1DropInfoReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF1_DROP_INFO_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 20 }
|
|
|
|
rcKhiForwardingRofRspErrorHab0DropInfoReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB0_DROP_INFO_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 21 }
|
|
|
|
rcKhiForwardingRofRspErrorHab1DropInfoReg OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB1_DROP_INFO_REG"
|
|
::= { rcKhiForwardingRofRspErrorEntry 22 }
|
|
|
|
|
|
-- KHI Forwarding table for Rof IFP drop stats
|
|
|
|
rcKhiForwardingRofIfpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofIfpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "KHI Forwarding IFP Drop Stats for RoF"
|
|
::= { rcKhiForwardingCb 10 }
|
|
|
|
rcKhiForwardingRofIfpEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofIfpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "KHI Forwarding IFP Drop Stats for RoF"
|
|
INDEX { rcKhiForwardingRofIfpSlot,
|
|
rcKhiForwardingRofIfpSlice,
|
|
rcKhiForwardingRofIfpLane }
|
|
::= { rcKhiForwardingRofIfpTable 1 }
|
|
|
|
RcKhiForwardingRofIfpEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofIfpSlot Integer32,
|
|
rcKhiForwardingRofIfpSlice Integer32,
|
|
rcKhiForwardingRofIfpLane Integer32,
|
|
rcKhiForwardingRofIfpMcRateLimitDrop Counter64,
|
|
rcKhiForwardingRofIfpBcRateLimitDrop Counter64,
|
|
rcKhiForwardingRofIfpIpv6TcpMcDrop Counter64,
|
|
rcKhiForwardingRofIfpIpv4TcpMcDrop Counter64,
|
|
rcKhiForwardingRofIfpIfpDrop Counter64,
|
|
rcKhiForwardingRofIfpVlanMemDrop Counter64,
|
|
rcKhiForwardingRofIfpBlacklistDrop Counter64,
|
|
rcKhiForwardingRofIfpIpv6SipLoopbackDrop Counter64,
|
|
rcKhiForwardingRofIfpBadIpv4AddrDrop Counter64,
|
|
rcKhiForwardingRofIfpMacLoopbackDrop Counter64,
|
|
rcKhiForwardingRofIfp1dotPDrop Counter64,
|
|
rcKhiForwardingRofIfpCfiDrop Counter64,
|
|
rcKhiForwardingRofIfpUntagDrop Counter64,
|
|
rcKhiForwardingRofIfpTagDrop Counter64,
|
|
rcKhiForwardingRofIfpIstFilterDrop Counter64,
|
|
rcKhiForwardingRofIfpIpVerDrop Counter64,
|
|
rcKhiForwardingRofIfpVid0Drop Counter64,
|
|
rcKhiForwardingRofIfpUnsupportFrameDrop Counter64,
|
|
rcKhiForwardingRofIfpIpv4MacTtl0Drop Counter64
|
|
}
|
|
|
|
|
|
rcKhiForwardingRofIfpSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofIfpEntry 1 }
|
|
|
|
rcKhiForwardingRofIfpSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofIfpEntry 2 }
|
|
|
|
rcKhiForwardingRofIfpLane OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane"
|
|
::= { rcKhiForwardingRofIfpEntry 3 }
|
|
|
|
rcKhiForwardingRofIfpMcRateLimitDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAC_RATE_LIMIT_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 4 }
|
|
|
|
rcKhiForwardingRofIfpBcRateLimitDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BC_RATE_LIMIT_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 5 }
|
|
|
|
rcKhiForwardingRofIfpIpv6TcpMcDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPV6_TCP_MC_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 6 }
|
|
|
|
rcKhiForwardingRofIfpIpv4TcpMcDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPV4_TCP_MC_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 7 }
|
|
|
|
rcKhiForwardingRofIfpIfpDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IFP_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 8 }
|
|
|
|
rcKhiForwardingRofIfpVlanMemDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VLAN_MEM_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 9 }
|
|
|
|
rcKhiForwardingRofIfpBlacklistDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BLACKLIST_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 10 }
|
|
|
|
rcKhiForwardingRofIfpIpv6SipLoopbackDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPV6_SIP_LOOPBACK_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 11 }
|
|
|
|
rcKhiForwardingRofIfpBadIpv4AddrDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "BAD_IPV4_ADDR_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 12 }
|
|
|
|
rcKhiForwardingRofIfpMacLoopbackDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAC_LOOPBACK_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 13 }
|
|
|
|
rcKhiForwardingRofIfp1dotPDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "1DOTP_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 14 }
|
|
|
|
rcKhiForwardingRofIfpCfiDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CFI_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 15 }
|
|
|
|
rcKhiForwardingRofIfpUntagDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "UNTAG_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 16 }
|
|
|
|
rcKhiForwardingRofIfpTagDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TAG_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 17 }
|
|
|
|
rcKhiForwardingRofIfpIstFilterDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IST_FILTER_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 18 }
|
|
|
|
rcKhiForwardingRofIfpIpVerDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP_VER_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 19 }
|
|
|
|
rcKhiForwardingRofIfpVid0Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VID_0_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 20 }
|
|
|
|
rcKhiForwardingRofIfpUnsupportFrameDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "UNSUPPORTED_FRAME_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 21 }
|
|
|
|
rcKhiForwardingRofIfpIpv4MacTtl0Drop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IPV4_MC_TTL0_DROP"
|
|
::= { rcKhiForwardingRofIfpEntry 22 }
|
|
|
|
|
|
-- KHI Forwarding table for Rof IFP forw stats
|
|
|
|
rcKhiForwardingRofIfpForwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofIfpForwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "KHI Forwarding IFP Forwading Stats for RoF"
|
|
::= { rcKhiForwardingCb 11 }
|
|
|
|
rcKhiForwardingRofIfpForwEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofIfpForwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "KHI Forwarding IFP Forw Stats for RoF"
|
|
INDEX { rcKhiForwardingRofIfpForwSlot,
|
|
rcKhiForwardingRofIfpForwSlice,
|
|
rcKhiForwardingRofIfpForwLane,
|
|
rcKhiForwardingRofIfpForwTblType,
|
|
rcKhiForwardingRofIfpForwIndex }
|
|
::= { rcKhiForwardingRofIfpForwTable 1 }
|
|
|
|
RcKhiForwardingRofIfpForwEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofIfpForwSlot Integer32,
|
|
rcKhiForwardingRofIfpForwSlice Integer32,
|
|
rcKhiForwardingRofIfpForwLane Integer32,
|
|
rcKhiForwardingRofIfpForwTblType INTEGER,
|
|
rcKhiForwardingRofIfpForwIndex Integer32,
|
|
rcKhiForwardingRofIfpForwName DisplayString,
|
|
rcKhiForwardingRofIfpForwStatsPorts DisplayString,
|
|
rcKhiForwardingRofIfpForwStatsCnt Counter64
|
|
}
|
|
|
|
|
|
rcKhiForwardingRofIfpForwSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofIfpForwEntry 1 }
|
|
|
|
rcKhiForwardingRofIfpForwSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofIfpForwEntry 2 }
|
|
|
|
rcKhiForwardingRofIfpForwLane OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane Number"
|
|
::= { rcKhiForwardingRofIfpForwEntry 3 }
|
|
|
|
|
|
rcKhiForwardingRofIfpForwTblType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ifpPt(1),
|
|
ifpPcv(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Type of table IFP PT and IFP PCV for ROF cards"
|
|
::= { rcKhiForwardingRofIfpForwEntry 4 }
|
|
|
|
rcKhiForwardingRofIfpForwIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..256)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of the IFP Rule"
|
|
::= { rcKhiForwardingRofIfpForwEntry 5 }
|
|
|
|
rcKhiForwardingRofIfpForwName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the IFP Rule"
|
|
::= { rcKhiForwardingRofIfpForwEntry 6 }
|
|
|
|
rcKhiForwardingRofIfpForwStatsPorts OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Range of Ports in slice of the slot.
|
|
Display format will have Ports 0 or 1-8 /9-16/17-24
|
|
based on the card type"
|
|
::= { rcKhiForwardingRofIfpForwEntry 7 }
|
|
|
|
rcKhiForwardingRofIfpForwStatsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Counter for slice 0"
|
|
::= { rcKhiForwardingRofIfpForwEntry 8 }
|
|
|
|
-- KHI Forwarding table for Rof Zagros Forwarding stats
|
|
|
|
rcKhiForwardingRofZagForwStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofZagForwStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Forwarding Stats Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 12 }
|
|
|
|
rcKhiForwardingRofZagForwStatsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofZagForwStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Stats KHI - RoF."
|
|
INDEX { rcKhiForwardingRofZagForwStatsSlot,
|
|
rcKhiForwardingRofZagForwStatsSlice,
|
|
rcKhiForwardingRofZagForwStatsLane }
|
|
::= { rcKhiForwardingRofZagForwStatsTable 1 }
|
|
|
|
RcKhiForwardingRofZagForwStatsEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofZagForwStatsSlot Integer32,
|
|
rcKhiForwardingRofZagForwStatsSlice Integer32,
|
|
rcKhiForwardingRofZagForwStatsLane Integer32,
|
|
rcKhiForwardingRofZagForwPmmDpRxCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmDpTxCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmRspRxCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmRspTxCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmFp0RxCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmFp0TxCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmFp1RxCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmFp1TxCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmFlopTxCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmIngDataAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmIngScAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmIngLsmAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmIngCopAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmIngExpAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmEgrUcAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmEgrScAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmEgrMcRootAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmEgrOobAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmEgrExpandAdmitCnt Counter64,
|
|
rcKhiForwardingRofZagForwFpRxPacketcount0 Counter64,
|
|
rcKhiForwardingRofZagForwFpRxPacketcount1 Counter64,
|
|
rcKhiForwardingRofZagForwFpTxPacketCnt0 Counter64,
|
|
rcKhiForwardingRofZagForwFpTxPacketCnt1 Counter64,
|
|
rcKhiForwardingRofZagForwHabRxPackletCnt Counter64,
|
|
rcKhiForwardingRofZagForwHabTxPackletCnt Counter64,
|
|
rcKhiForwardingRofZagForwCifRxOperationCnt Counter64,
|
|
rcKhiForwardingRofZagForwCifTxOperationCnt Counter64,
|
|
rcKhiForwardingRofZagForwZpktRxOkCnt Counter64,
|
|
rcKhiForwardingRofZagForwZpktTxOkCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipTxfragDatCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipTxfragRspCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipTxfragPcieCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipTxfragSephCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipTxfragSeplCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipRxfragDatOkCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipRxfragRspOkCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipRxfragPcieOkCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipRxfragSephOkCnt Counter64,
|
|
rcKhiForwardingRofZagForwZipRxfragSeplOkCnt Counter64,
|
|
rcKhiForwardingRofZagForwPmmRspRxTestCount Counter64,
|
|
rcKhiForwardingRofZagForwPmmRspTxTestCount Counter64,
|
|
rcKhiForwardingRofZagForwPmmDPRxTestCount Counter64,
|
|
rcKhiForwardingRofZagForwPmmDPTxTestCount Counter64,
|
|
rcKhiForwardingRofZagForwPmmFP0RxTestCount Counter64,
|
|
rcKhiForwardingRofZagForwPmmFP0TxTestCount Counter64,
|
|
rcKhiForwardingRofZagForwPmmFP1RxTestCount Counter64,
|
|
rcKhiForwardingRofZagForwPmmFP1TxTestCount Counter64,
|
|
rcKhiForwardingRofZagForwPmmFlopTxTestCount Counter64,
|
|
rcKhiForwardingRofZagForwIhpPcCount Counter64
|
|
|
|
}
|
|
|
|
rcKhiForwardingRofZagForwStatsSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 1 }
|
|
|
|
rcKhiForwardingRofZagForwStatsSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 2 }
|
|
|
|
rcKhiForwardingRofZagForwStatsLane OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 3 }
|
|
|
|
rcKhiForwardingRofZagForwPmmDpRxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_DP_RX_COUN"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 4 }
|
|
|
|
rcKhiForwardingRofZagForwPmmDpTxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_DP_TX_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 5 }
|
|
|
|
rcKhiForwardingRofZagForwPmmRspRxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_RSP_RX_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 6 }
|
|
|
|
rcKhiForwardingRofZagForwPmmRspTxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_RSP_TX_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 7 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFp0RxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FP0_RX_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 8 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFp0TxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FP0_TX_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 9 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFp1RxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FP1_RX_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 10 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFp1TxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FP1_TX_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 11 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFlopTxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FLOP_TX_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 12 }
|
|
|
|
rcKhiForwardingRofZagForwPmmIngDataAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_ADMIT_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 13 }
|
|
|
|
rcKhiForwardingRofZagForwPmmIngScAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_SC_ADMIT_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 14 }
|
|
|
|
rcKhiForwardingRofZagForwPmmIngLsmAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_LSM_ADMIT_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 15 }
|
|
|
|
rcKhiForwardingRofZagForwPmmIngCopAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_COP_ADMIT_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 16 }
|
|
|
|
rcKhiForwardingRofZagForwPmmIngExpAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_EXPAND_ADMIT_COUN"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 17 }
|
|
|
|
rcKhiForwardingRofZagForwPmmEgrUcAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_UC_ADMIT_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 18 }
|
|
|
|
rcKhiForwardingRofZagForwPmmEgrScAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_SC_ADMIT_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 19 }
|
|
|
|
rcKhiForwardingRofZagForwPmmEgrMcRootAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_ROOT_ADMIT_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 20 }
|
|
|
|
rcKhiForwardingRofZagForwPmmEgrOobAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_OOB_ADMIT_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 21 }
|
|
|
|
rcKhiForwardingRofZagForwPmmEgrExpandAdmitCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_EXPAND_ADMIT_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 22 }
|
|
|
|
rcKhiForwardingRofZagForwFpRxPacketcount0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_RX_PACKET_COUNT0"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 23 }
|
|
|
|
rcKhiForwardingRofZagForwFpRxPacketcount1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_RX_PACKET_COUNT1"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 24 }
|
|
|
|
rcKhiForwardingRofZagForwFpTxPacketCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_TX_PACKET_COUNT0"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 25 }
|
|
|
|
rcKhiForwardingRofZagForwFpTxPacketCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_TX_PACKET_COUNT1"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 26 }
|
|
|
|
rcKhiForwardingRofZagForwHabRxPackletCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB_RX_PACKLET_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 27 }
|
|
|
|
rcKhiForwardingRofZagForwHabTxPackletCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB_TX_PACKLET_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 28 }
|
|
|
|
rcKhiForwardingRofZagForwCifRxOperationCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF_RX_OPERATION_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 29 }
|
|
|
|
rcKhiForwardingRofZagForwCifTxOperationCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF_TX_OPERATION_COUNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 30 }
|
|
|
|
rcKhiForwardingRofZagForwZpktRxOkCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZPKT_RX_OK_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 31 }
|
|
|
|
rcKhiForwardingRofZagForwZpktTxOkCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZPKT_TX_OK_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 32 }
|
|
|
|
rcKhiForwardingRofZagForwZipTxfragDatCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_TXFRAG_DAT_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 33 }
|
|
|
|
rcKhiForwardingRofZagForwZipTxfragRspCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_TXFRAG_RSP_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 34 }
|
|
|
|
rcKhiForwardingRofZagForwZipTxfragPcieCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_TXFRAG_PCIE_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 35 }
|
|
|
|
rcKhiForwardingRofZagForwZipTxfragSephCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_TXFRAG_SEPH_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 36 }
|
|
|
|
rcKhiForwardingRofZagForwZipTxfragSeplCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_TXFRAG_SEPL_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 37 }
|
|
|
|
rcKhiForwardingRofZagForwZipRxfragDatOkCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_DAT_OK_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 38 }
|
|
|
|
rcKhiForwardingRofZagForwZipRxfragRspOkCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_RSP_OK_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 39 }
|
|
|
|
rcKhiForwardingRofZagForwZipRxfragPcieOkCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_PCIE_OK_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 40 }
|
|
|
|
rcKhiForwardingRofZagForwZipRxfragSephOkCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_SEPH_OK_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 41 }
|
|
|
|
rcKhiForwardingRofZagForwZipRxfragSeplOkCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_SEPL_OK_CNT"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 42 }
|
|
|
|
rcKhiForwardingRofZagForwPmmRspRxTestCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_RSP_Rx_Test_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 43 }
|
|
|
|
rcKhiForwardingRofZagForwPmmRspTxTestCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_RSP_Tx_Test_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 44 }
|
|
|
|
rcKhiForwardingRofZagForwPmmDPRxTestCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_DP_Rx_Test_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 45 }
|
|
|
|
rcKhiForwardingRofZagForwPmmDPTxTestCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_DP_Tx_Test_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 46 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFP0RxTestCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FP0_Rx_Test_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 47 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFP0TxTestCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FP0_Tx_Test_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 48 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFP1RxTestCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FP1_Rx_Test_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 49 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFP1TxTestCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FP1_Tx_Test_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 50 }
|
|
|
|
rcKhiForwardingRofZagForwPmmFlopTxTestCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FLOP_Tx_Test_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 51 }
|
|
|
|
rcKhiForwardingRofZagForwIhpPcCount OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IHP_PC_Count"
|
|
::= { rcKhiForwardingRofZagForwStatsEntry 52 }
|
|
|
|
-- KHI Forwarding table for Rof Zagros Drop stats
|
|
|
|
rcKhiForwardingRofZagDropStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofZagDropStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Drop Stats - 1 Instance Registers - Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 13 }
|
|
|
|
rcKhiForwardingRofZagDropStatsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofZagDropStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Stats KHI - RoF."
|
|
INDEX { rcKhiForwardingRofZagDropStatsSlot,
|
|
rcKhiForwardingRofZagDropStatsSlice,
|
|
rcKhiForwardingRofZagDropStatsLane }
|
|
::= { rcKhiForwardingRofZagDropStatsTable 1 }
|
|
|
|
RcKhiForwardingRofZagDropStatsEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofZagDropStatsSlot Integer32,
|
|
rcKhiForwardingRofZagDropStatsSlice Integer32,
|
|
rcKhiForwardingRofZagDropStatsLane Integer32,
|
|
rcKhiForwardingRofZagDropPmmRspCmdDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmFabricPort0FfeDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmFabricPort1FfeDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmPmCmdDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmDpRxDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataCtlDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort0DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort1DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort2DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort3DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort4DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort5DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort6DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort7DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort8DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort9DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort10DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort11DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort12DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort13DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort14DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngDataPort15DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngCopDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmIngExpandDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrUcDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrScDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT0DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT1DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT2DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT3DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT4DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT5DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT6DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT7DropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrOobDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmEgrExpandDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropPmmMpvMpidDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropZfaInvalidGpidDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropCifRxOperErrCnt Counter64,
|
|
rcKhiForwardingRofZagDropEhpStgDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropEhpNoRcvrDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropHcfcRxErrCnt Counter64,
|
|
rcKhiForwardingRofZagDropZipRxfragDatErrCnt Counter64,
|
|
rcKhiForwardingRofZagDropZiPRxfragRspErrCnt Counter64,
|
|
rcKhiForwardingRofZagDropZipRxfragPcieErrCnt Counter64,
|
|
rcKhiForwardingRofZagDropZipRxfragSephErrCnt Counter64,
|
|
rcKhiForwardingRofZagDropZipRxfragSeplErrCnt Counter64,
|
|
rcKhiForwardingRofZagDropZipRxfragDropCnt Counter64,
|
|
rcKhiForwardingRofZagDropZipRxfragInvctlCnt Counter64,
|
|
rcKhiForwardingRofZagDropZpktRxErrCnt Counter64,
|
|
rcKhiForwardingRofZagDropZpktTxErrCnt Counter64
|
|
}
|
|
|
|
|
|
|
|
rcKhiForwardingRofZagDropStatsSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 1 }
|
|
|
|
rcKhiForwardingRofZagDropStatsSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 2 }
|
|
|
|
rcKhiForwardingRofZagDropStatsLane OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 3 }
|
|
|
|
rcKhiForwardingRofZagDropPmmRspCmdDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_RSP_CMD_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 4 }
|
|
|
|
rcKhiForwardingRofZagDropPmmFabricPort0FfeDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FABRIC_PORT0_FFE_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 5 }
|
|
|
|
rcKhiForwardingRofZagDropPmmFabricPort1FfeDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FABRIC_PORT1_FFE_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 6 }
|
|
|
|
rcKhiForwardingRofZagDropPmmPmCmdDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_PM_CMD_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 7 }
|
|
|
|
rcKhiForwardingRofZagDropPmmDpRxDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_DP_RX_DRP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 8 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataCtlDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_CTL_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 9 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort0DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT0_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 10 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort1DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT1_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 11 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort2DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT2_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 12 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort3DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT3_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 13 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort4DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT4_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 14 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort5DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT5_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 15 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort6DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT6_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 16 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort7DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT7_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 17 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort8DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT8_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 18 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort9DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT9_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 19 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort10DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT10_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 20 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort11DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT11_DROP_COUN"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 21 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort12DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT12_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 22 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort13DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT13_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 23 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort14DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT14_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 24 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngDataPort15DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PORT15_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 25 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngCopDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_COP_DROP_COUN"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 26 }
|
|
|
|
rcKhiForwardingRofZagDropPmmIngExpandDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_EXPAND_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 27 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrUcDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_UC_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 28 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrScDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_SC_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 29 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT0DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_ROOT_T0_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 30 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT1DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_ROOT_T1_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 31 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT2DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_ROOT_T2_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 32 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT3DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_ROOT_T3_DROP_COUN"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 33 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT4DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_ROOT_T4_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 34 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT5DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_ROOT_T5_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 35 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT6DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_ROOT_T6_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 36 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrMcRootT7DropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_ROOT_T7_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 37 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrOobDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_OOB_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 38 }
|
|
|
|
rcKhiForwardingRofZagDropPmmEgrExpandDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_EXPAND_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 39 }
|
|
|
|
rcKhiForwardingRofZagDropPmmMpvMpidDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_MPID_DROP_COUN"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 40 }
|
|
|
|
rcKhiForwardingRofZagDropZfaInvalidGpidDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZFA_INVALID_GPID_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 41 }
|
|
|
|
rcKhiForwardingRofZagDropCifRxOperErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF_RX_OPERATION_ERROR_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 42 }
|
|
|
|
rcKhiForwardingRofZagDropEhpStgDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EHP_STG_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 43 }
|
|
|
|
rcKhiForwardingRofZagDropEhpNoRcvrDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EHP_NO_RCVR_DROP_COUNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 44 }
|
|
|
|
|
|
rcKhiForwardingRofZagDropHcfcRxErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HCFC_RX_ERR_CNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 45 }
|
|
|
|
rcKhiForwardingRofZagDropZipRxfragDatErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_DAT_ERR_CNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 46 }
|
|
|
|
rcKhiForwardingRofZagDropZiPRxfragRspErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_RSP_ERR_CNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 47 }
|
|
|
|
rcKhiForwardingRofZagDropZipRxfragPcieErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_PCIE_ERR_CNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 48 }
|
|
|
|
rcKhiForwardingRofZagDropZipRxfragSephErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_SEPH_ERR_CNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 49 }
|
|
|
|
rcKhiForwardingRofZagDropZipRxfragSeplErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_SEPL_ERR_CN"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 50 }
|
|
|
|
rcKhiForwardingRofZagDropZipRxfragDropCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_DROP_CNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 51 }
|
|
|
|
rcKhiForwardingRofZagDropZipRxfragInvctlCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_RXFRAG_INVCTL_CN"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 52 }
|
|
|
|
rcKhiForwardingRofZagDropZpktRxErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZPKT_RX_ERR_CNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 53 }
|
|
|
|
rcKhiForwardingRofZagDropZpktTxErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZPKT_TX_ERR_CNT"
|
|
::= { rcKhiForwardingRofZagDropStatsEntry 54 }
|
|
|
|
|
|
|
|
-- KHI Forwarding table for Rof Zagros Drop Extended stats
|
|
|
|
rcKhiForwardingRofZagDropExtendedStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofZagDropExtendedStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Drop Stats - Multiple Instance Registers - Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 14 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedStatsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofZagDropExtendedStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Drop Extended Stats KHI - RoF."
|
|
INDEX { rcKhiForwardingRofZagDropExtendedStatsSlot,
|
|
rcKhiForwardingRofZagDropExtendedStatsSlice,
|
|
rcKhiForwardingRofZagDropExtendedStatsLane }
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsTable 1 }
|
|
|
|
RcKhiForwardingRofZagDropExtendedStatsEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofZagDropExtendedStatsSlot Integer32,
|
|
rcKhiForwardingRofZagDropExtendedStatsSlice Integer32,
|
|
rcKhiForwardingRofZagDropExtendedStatsLane Integer32,
|
|
rcKhiForwardingRofZagDropExtendedFpRxPacketErrCnt0 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedFpRxPacketErrCnt1 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedFpTxPacketErrCnt0 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedFpTxPacketErrCnt1 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedFpRxJunkErrCnt0 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedFpRxJunkErrCnt1 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt0 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt1 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt2 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt3 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt4 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt5 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt6 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt7 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt0 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt1 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt2 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt3 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt4 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt5 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt6 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt7 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt0 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt1 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt2 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt3 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt4 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt5 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt6 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt7 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt0 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt1 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt2 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt3 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt4 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt5 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt6 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt7 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt0 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt1 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt2 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt3 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt4 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt5 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt6 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt7 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt0 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt1 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt2 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt3 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt4 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt5 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt6 Counter64,
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt7 Counter64
|
|
}
|
|
|
|
rcKhiForwardingRofZagDropExtendedStatsSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 1 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedStatsSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 2 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedStatsLane OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 3 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedFpRxPacketErrCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_RX_PACKET_ERROR_COUNT0"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 4 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedFpRxPacketErrCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_RX_PACKET_ERROR_COUNT1"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 5 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedFpTxPacketErrCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_TX_PACKET_ERROR_COUNT0"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 6 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedFpTxPacketErrCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_TX_PACKET_ERROR_COUNT1"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 7 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedFpRxJunkErrCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_RX_JUNK_ERROR_COUNT0"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 8 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedFpRxJunkErrCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_RX_JUNK_ERROR_COUNT1"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 9 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_SKO_DROP_COUNT0"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 10 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_SKO_DROP_COUNT1"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 11 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_SKO_DROP_COUNT2"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 12 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_SKO_DROP_COUNT3"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 13 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_SKO_DROP_COUNT4"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 14 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_SKO_DROP_COUNT5"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 15 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt6 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_SKO_DROP_COUNT6"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 16 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt7 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_SKO_DROP_COUNT7"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 17 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_MLT_DROP_COUNT0"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 18 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_MLT_DROP_COUNT1"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 19 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_MLT_DROP_COUNT2"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 20 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_MLT_DROP_COUNT3"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 21 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_MLT_DROP_COUNT4"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 22 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_MLT_DROP_COUNT5"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 23 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt6 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_MLT_DROP_COUNT6"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 24 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt7 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_MLT_DROP_COUNT7"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 25 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT0"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 26 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT1"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 27 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT2"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 28 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT3"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 29 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT4"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 30 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT5"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 31 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt6 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT6"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 32 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt7 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT7"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 33 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT0"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 34 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT1"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 35 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT2"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 36 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT3"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 37 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT4"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 38 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT5"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 39 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt6 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT6"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 40 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt7 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_MPV_FFE_DROP_COUNT7"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 41 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DROP_CNT0"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 42 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DROP_CNT1"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 43 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DROP_CNT2"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 44 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DROP_CNT3"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 45 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DROP_CNT4"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 46 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DROP_CNT5"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 47 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt6 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DROP_CNT6"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 48 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDropCnt7 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DROP_CNT7"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 49 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DISCARD_COUNT0"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 50 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DISCARD_COUNT1"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 51 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DISCARD_COUNT2"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 52 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DISCARD_COUNT3"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 53 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DISCARD_COUNT4"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 54 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DISCARD_COUNT5"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 55 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt6 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DISCARD_COUNT6"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 56 }
|
|
|
|
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt7 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DISCARD_COUNT7"
|
|
::= { rcKhiForwardingRofZagDropExtendedStatsEntry 57 }
|
|
|
|
|
|
|
|
-- KHI Forwarding table for Rof Zagros status
|
|
|
|
rcKhiForwardingRofZagStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofZagStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Status Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 15 }
|
|
|
|
rcKhiForwardingRofZagStatusEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofZagStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Status KHI - RoF."
|
|
INDEX { rcKhiForwardingRofZagStatusSlot,
|
|
rcKhiForwardingRofZagStatusSlice,
|
|
rcKhiForwardingRofZagStatusLane }
|
|
::= { rcKhiForwardingRofZagStatusTable 1 }
|
|
|
|
RcKhiForwardingRofZagStatusEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofZagStatusSlot Integer32,
|
|
rcKhiForwardingRofZagStatusSlice Integer32,
|
|
rcKhiForwardingRofZagStatusLane Integer32,
|
|
rcKhiForwardingRofZagZag2DeviceIdBuild Counter32,
|
|
rcKhiForwardingRofZagZag2Build Counter32,
|
|
rcKhiForwardingRofZagZag2Status Counter32,
|
|
rcKhiForwardingRofZagZag2Interrupt Counter32,
|
|
rcKhiForwardingRofZagZipStatus Counter32,
|
|
rcKhiForwardingRofZagZipSbmStatus Counter32,
|
|
rcKhiForwardingRofZagCifStatus Counter32,
|
|
rcKhiForwardingRofZagDpStatus0 Counter32,
|
|
rcKhiForwardingRofZagDpStatus1 Counter32,
|
|
rcKhiForwardingRofZagDpStatus2 Counter32,
|
|
rcKhiForwardingRofZagDpStatus3 Counter32,
|
|
rcKhiForwardingRofZagDpStatus4 Counter32,
|
|
rcKhiForwardingRofZagDpStatus5 Counter32,
|
|
rcKhiForwardingRofZagDpStatus6 Counter32,
|
|
rcKhiForwardingRofZagDpStatus7 Counter32,
|
|
rcKhiForwardingRofZagDpInterrupt0 Counter32,
|
|
rcKhiForwardingRofZagDpInterrupt1 Counter32,
|
|
rcKhiForwardingRofZagDpInterrupt2 Counter32,
|
|
rcKhiForwardingRofZagDpInterrupt3 Counter32,
|
|
rcKhiForwardingRofZagDpInterrupt4 Counter32,
|
|
rcKhiForwardingRofZagDpInterrupt5 Counter32,
|
|
rcKhiForwardingRofZagDpInterrupt6 Counter32,
|
|
rcKhiForwardingRofZagDpInterrupt7 Counter32,
|
|
rcKhiForwardingRofZagFpStatus0 Counter32,
|
|
rcKhiForwardingRofZagFpStatus1 Counter32,
|
|
rcKhiForwardingRofZagHabStatus Counter32,
|
|
rcKhiForwardingRofZagPmmInterrupt Counter32,
|
|
rcKhiForwardingRofZagPmmIngDataPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmIngDataPeakPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmIngScPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmIngScOrdinaryLmt Counter32,
|
|
rcKhiForwardingRofZagPmmIngScMaxLmt Counter32,
|
|
rcKhiForwardingRofZagPmmIngLsmPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmIngLsmMaxLmt Counter32,
|
|
rcKhiForwardingRofZagPmmIngCopPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmIngCopMaxLmt Counter32,
|
|
rcKhiForwardingRofZagPmmIngExpandPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmIngExpandMaxLmt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrUcPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrUcPeakPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrUcMaxLmt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrScPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrScMaxLmt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrMcPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrMcPeakPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrMcMpvRootLmt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrMcMaxLmt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrOobPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrOobMaxLmt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrExpandPageCnt Counter32,
|
|
rcKhiForwardingRofZagPmmEgrExpandMaxLmt Counter32,
|
|
rcKhiForwardingRofZagIdpStatus0 Counter32,
|
|
rcKhiForwardingRofZagIdpStatus1 Counter32,
|
|
rcKhiForwardingRofZagEhpStatus Counter32,
|
|
rcKhiForwardingRofZagEhpFifoStatus Counter32,
|
|
rcKhiForwardingRofZagIhpCtlReg0 Counter32,
|
|
rcKhiForwardingRofZagIhpStatReg0 Counter32,
|
|
rcKhiForwardingRofZagIhpStatus1 Counter32,
|
|
rcKhiForwardingRofZagIhpCtlReg1 Counter32,
|
|
rcKhiForwardingRofZagIhpGenCfgReg Counter32,
|
|
rcKhiForwardingRofZagZfaFifoStatusReg Counter32,
|
|
rcKhiForwardingRofZagHbmEvents Counter32,
|
|
rcKhiForwardingRofZagHbmCreditCnt Counter32,
|
|
rcKhiForwardingRofZagLsmLinkState Counter32,
|
|
rcKhiForwardingRofZagLsmHwLinkState Counter32,
|
|
rcKhiForwardingRofZagTxbDebug0 Counter32,
|
|
rcKhiForwardingRofZagTxbDebug1 Counter32,
|
|
rcKhiForwardingRofZagTxbDebug2 Counter32,
|
|
rcKhiForwardingRofZagTxbDebug3 Counter32,
|
|
rcKhiForwardingRofZagTxbEvent Counter32,
|
|
rcKhiForwardingRofZagTxbUcfifoFull Counter32,
|
|
rcKhiForwardingRofZagDpExtStatus0 Counter32,
|
|
rcKhiForwardingRofZagDpExtStatus1 Counter32,
|
|
rcKhiForwardingRofZagDpExtStatus2 Counter32,
|
|
rcKhiForwardingRofZagDpExtStatus3 Counter32,
|
|
rcKhiForwardingRofZagDpExtStatus4 Counter32,
|
|
rcKhiForwardingRofZagDpExtStatus5 Counter32,
|
|
rcKhiForwardingRofZagDpExtStatus6 Counter32,
|
|
rcKhiForwardingRofZagDpExtStatus7 Counter32,
|
|
rcKhiForwardingRofZagPmmEgrMcMccRootLmt Counter32,
|
|
rcKhiForwardingRofZagTxbMcfifoFull Counter32
|
|
}
|
|
|
|
rcKhiForwardingRofZagStatusSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofZagStatusEntry 1 }
|
|
|
|
rcKhiForwardingRofZagStatusSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofZagStatusEntry 2 }
|
|
|
|
rcKhiForwardingRofZagStatusLane OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane"
|
|
::= { rcKhiForwardingRofZagStatusEntry 3 }
|
|
|
|
rcKhiForwardingRofZagZag2DeviceIdBuild OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZAG2_DEVICE_ID_BUILD"
|
|
::= { rcKhiForwardingRofZagStatusEntry 4 }
|
|
|
|
rcKhiForwardingRofZagZag2Build OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZAG2_BUILD"
|
|
::= { rcKhiForwardingRofZagStatusEntry 5 }
|
|
|
|
rcKhiForwardingRofZagZag2Status OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZAG2_STATUS"
|
|
::= { rcKhiForwardingRofZagStatusEntry 6 }
|
|
|
|
rcKhiForwardingRofZagZag2Interrupt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZAG2_INTERRUPT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 7 }
|
|
|
|
rcKhiForwardingRofZagZipStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_STATUS"
|
|
::= { rcKhiForwardingRofZagStatusEntry 8 }
|
|
|
|
rcKhiForwardingRofZagZipSbmStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZIP_SBM_STATUS"
|
|
::= { rcKhiForwardingRofZagStatusEntry 9 }
|
|
|
|
rcKhiForwardingRofZagCifStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF_STATUS"
|
|
::= { rcKhiForwardingRofZagStatusEntry 10 }
|
|
|
|
rcKhiForwardingRofZagDpStatus0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_STATUS0"
|
|
::= { rcKhiForwardingRofZagStatusEntry 11 }
|
|
|
|
rcKhiForwardingRofZagDpStatus1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_STATUS1"
|
|
::= { rcKhiForwardingRofZagStatusEntry 12 }
|
|
|
|
rcKhiForwardingRofZagDpStatus2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_STATUS2"
|
|
::= { rcKhiForwardingRofZagStatusEntry 13 }
|
|
|
|
rcKhiForwardingRofZagDpStatus3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_STATUS3"
|
|
::= { rcKhiForwardingRofZagStatusEntry 14 }
|
|
|
|
rcKhiForwardingRofZagDpStatus4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_STATUS4"
|
|
::= { rcKhiForwardingRofZagStatusEntry 15 }
|
|
|
|
rcKhiForwardingRofZagDpStatus5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_STATUS5"
|
|
::= { rcKhiForwardingRofZagStatusEntry 16 }
|
|
|
|
rcKhiForwardingRofZagDpStatus6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_STATUS6"
|
|
::= { rcKhiForwardingRofZagStatusEntry 17 }
|
|
|
|
rcKhiForwardingRofZagDpStatus7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_STATUS7"
|
|
::= { rcKhiForwardingRofZagStatusEntry 18 }
|
|
|
|
rcKhiForwardingRofZagDpInterrupt0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT0"
|
|
::= { rcKhiForwardingRofZagStatusEntry 19 }
|
|
|
|
rcKhiForwardingRofZagDpInterrupt1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT1"
|
|
::= { rcKhiForwardingRofZagStatusEntry 20 }
|
|
|
|
rcKhiForwardingRofZagDpInterrupt2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT2"
|
|
::= { rcKhiForwardingRofZagStatusEntry 21 }
|
|
|
|
rcKhiForwardingRofZagDpInterrupt3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT3"
|
|
::= { rcKhiForwardingRofZagStatusEntry 22 }
|
|
|
|
rcKhiForwardingRofZagDpInterrupt4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT4"
|
|
::= { rcKhiForwardingRofZagStatusEntry 23 }
|
|
|
|
rcKhiForwardingRofZagDpInterrupt5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT5"
|
|
::= { rcKhiForwardingRofZagStatusEntry 24 }
|
|
|
|
rcKhiForwardingRofZagDpInterrupt6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT6"
|
|
::= { rcKhiForwardingRofZagStatusEntry 25 }
|
|
|
|
rcKhiForwardingRofZagDpInterrupt7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT7"
|
|
::= { rcKhiForwardingRofZagStatusEntry 26 }
|
|
|
|
rcKhiForwardingRofZagFpStatus0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_STATUS0"
|
|
::= { rcKhiForwardingRofZagStatusEntry 27 }
|
|
|
|
rcKhiForwardingRofZagFpStatus1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_STATUS1"
|
|
::= { rcKhiForwardingRofZagStatusEntry 28 }
|
|
|
|
rcKhiForwardingRofZagHabStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB_STATUS"
|
|
::= { rcKhiForwardingRofZagStatusEntry 29 }
|
|
|
|
rcKhiForwardingRofZagPmmInterrupt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INTERRUPT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 30 }
|
|
|
|
rcKhiForwardingRofZagPmmIngDataPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 31 }
|
|
|
|
rcKhiForwardingRofZagPmmIngDataPeakPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_DATA_PEAK_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 32 }
|
|
|
|
rcKhiForwardingRofZagPmmIngScPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_SC_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 33 }
|
|
|
|
rcKhiForwardingRofZagPmmIngScOrdinaryLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_SC_ORDINARY_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 34 }
|
|
|
|
rcKhiForwardingRofZagPmmIngScMaxLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_SC_MAX_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 35 }
|
|
|
|
rcKhiForwardingRofZagPmmIngLsmPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_LSM_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 36 }
|
|
|
|
rcKhiForwardingRofZagPmmIngLsmMaxLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_LSM_MAX_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 37 }
|
|
|
|
rcKhiForwardingRofZagPmmIngCopPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_COP_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 38 }
|
|
|
|
rcKhiForwardingRofZagPmmIngCopMaxLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_COP_MAX_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 39 }
|
|
|
|
rcKhiForwardingRofZagPmmIngExpandPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_EXPAND_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 40 }
|
|
|
|
rcKhiForwardingRofZagPmmIngExpandMaxLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_INGRESS_EXPAND_MAX_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 41 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrUcPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_UC_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 42 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrUcPeakPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_UC_PEAK_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 43 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrUcMaxLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_UC_MAX_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 44 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrScPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_SC_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 45 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrScMaxLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_SC_MAX_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 46 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrMcPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 47 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrMcPeakPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_PEAK_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 48 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrMcMpvRootLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_MPV_ROOT_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 49 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrMcMaxLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_MAX_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 50 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrOobPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_OOB_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 51 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrOobMaxLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_OOB_MAX_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 52 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrExpandPageCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_EXPAND_PAGE_COUNT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 53 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrExpandMaxLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_EXPAND_MAX_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 54 }
|
|
|
|
rcKhiForwardingRofZagIdpStatus0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IDP_STATUS_0"
|
|
::= { rcKhiForwardingRofZagStatusEntry 55 }
|
|
|
|
rcKhiForwardingRofZagIdpStatus1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IDP_STATUS_1"
|
|
::= { rcKhiForwardingRofZagStatusEntry 56 }
|
|
|
|
rcKhiForwardingRofZagEhpStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EHP_STATUS"
|
|
::= { rcKhiForwardingRofZagStatusEntry 57 }
|
|
|
|
rcKhiForwardingRofZagEhpFifoStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "EHP_FIFO_STATUS"
|
|
::= { rcKhiForwardingRofZagStatusEntry 58 }
|
|
|
|
rcKhiForwardingRofZagIhpCtlReg0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IHP_CTL_REG0"
|
|
::= { rcKhiForwardingRofZagStatusEntry 59 }
|
|
|
|
rcKhiForwardingRofZagIhpStatReg0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IHP_STAT_REG0"
|
|
::= { rcKhiForwardingRofZagStatusEntry 60 }
|
|
|
|
rcKhiForwardingRofZagIhpStatus1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IHP_STATUS_1"
|
|
::= { rcKhiForwardingRofZagStatusEntry 61 }
|
|
|
|
rcKhiForwardingRofZagIhpCtlReg1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IHP_CTL_REG1"
|
|
::= { rcKhiForwardingRofZagStatusEntry 62 }
|
|
|
|
rcKhiForwardingRofZagIhpGenCfgReg OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IHP_GEN_CFG_REG"
|
|
::= { rcKhiForwardingRofZagStatusEntry 63 }
|
|
|
|
rcKhiForwardingRofZagZfaFifoStatusReg OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZFA_FIFO_STATUS_REG"
|
|
::= { rcKhiForwardingRofZagStatusEntry 64 }
|
|
|
|
rcKhiForwardingRofZagHbmEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HBM_EVENTS"
|
|
::= { rcKhiForwardingRofZagStatusEntry 65 }
|
|
|
|
rcKhiForwardingRofZagHbmCreditCnt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HBM_CREDIT_COUNTER"
|
|
::= { rcKhiForwardingRofZagStatusEntry 66 }
|
|
|
|
rcKhiForwardingRofZagLsmLinkState OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LSM_LINK_STATE"
|
|
::= { rcKhiForwardingRofZagStatusEntry 67 }
|
|
|
|
rcKhiForwardingRofZagLsmHwLinkState OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LSM_HW_LINK_STATE"
|
|
::= { rcKhiForwardingRofZagStatusEntry 68}
|
|
|
|
rcKhiForwardingRofZagTxbDebug0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DEBUG0"
|
|
::= { rcKhiForwardingRofZagStatusEntry 69 }
|
|
|
|
rcKhiForwardingRofZagTxbDebug1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DEBUG1"
|
|
::= { rcKhiForwardingRofZagStatusEntry 70 }
|
|
|
|
rcKhiForwardingRofZagTxbDebug2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DEBUG2"
|
|
::= { rcKhiForwardingRofZagStatusEntry 71 }
|
|
|
|
rcKhiForwardingRofZagTxbDebug3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_DEBUG3"
|
|
::= { rcKhiForwardingRofZagStatusEntry 72 }
|
|
|
|
rcKhiForwardingRofZagTxbEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_EVENT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 73 }
|
|
|
|
rcKhiForwardingRofZagTxbUcfifoFull OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_UC_FIFO_FULL "
|
|
::= { rcKhiForwardingRofZagStatusEntry 74 }
|
|
|
|
rcKhiForwardingRofZagDpExtStatus0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT0"
|
|
::= { rcKhiForwardingRofZagStatusEntry 75 }
|
|
|
|
rcKhiForwardingRofZagDpExtStatus1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT1"
|
|
::= { rcKhiForwardingRofZagStatusEntry 76 }
|
|
|
|
rcKhiForwardingRofZagDpExtStatus2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT2"
|
|
::= { rcKhiForwardingRofZagStatusEntry 77 }
|
|
|
|
rcKhiForwardingRofZagDpExtStatus3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT3"
|
|
::= { rcKhiForwardingRofZagStatusEntry 78 }
|
|
|
|
rcKhiForwardingRofZagDpExtStatus4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT4"
|
|
::= { rcKhiForwardingRofZagStatusEntry 79 }
|
|
|
|
rcKhiForwardingRofZagDpExtStatus5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT5"
|
|
::= { rcKhiForwardingRofZagStatusEntry 80 }
|
|
|
|
rcKhiForwardingRofZagDpExtStatus6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT6"
|
|
::= { rcKhiForwardingRofZagStatusEntry 81 }
|
|
|
|
rcKhiForwardingRofZagDpExtStatus7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_INTERRUPT7"
|
|
::= { rcKhiForwardingRofZagStatusEntry 82 }
|
|
|
|
rcKhiForwardingRofZagPmmEgrMcMccRootLmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_EGRESS_MC_MCC_ROOT_LIMIT"
|
|
::= { rcKhiForwardingRofZagStatusEntry 83 }
|
|
|
|
rcKhiForwardingRofZagTxbMcfifoFull OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "TXB_MC_FIFO_FULL"
|
|
::= { rcKhiForwardingRofZagStatusEntry 84 }
|
|
|
|
|
|
-- KHI Forwarding table for Rof Zagros error
|
|
|
|
rcKhiForwardingRofZagErrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofZagErrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Error Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 16 }
|
|
|
|
rcKhiForwardingRofZagErrEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofZagErrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Zagros Error KHI - RoF."
|
|
INDEX { rcKhiForwardingRofZagErrSlot,
|
|
rcKhiForwardingRofZagErrSlice,
|
|
rcKhiForwardingRofZagErrLane }
|
|
::= { rcKhiForwardingRofZagErrTable 1 }
|
|
|
|
RcKhiForwardingRofZagErrEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofZagErrSlot Integer32,
|
|
rcKhiForwardingRofZagErrSlice Integer32,
|
|
rcKhiForwardingRofZagErrLane Integer32,
|
|
rcKhiForwardingRofZagPmmRspErr Counter32,
|
|
rcKhiForwardingRofZagPmmDpErr Counter32,
|
|
rcKhiForwardingRofZagPmmFpErr Counter32,
|
|
rcKhiForwardingRofZagPmmPmErr Counter32,
|
|
rcKhiForwardingRofZagFpErr0 Counter32,
|
|
rcKhiForwardingRofZagFpErr1 Counter32,
|
|
rcKhiForwardingRofZagDpPortErr0 Counter32,
|
|
rcKhiForwardingRofZagDpPortErr1 Counter32,
|
|
rcKhiForwardingRofZagDpPortErr2 Counter32,
|
|
rcKhiForwardingRofZagDpPortErr3 Counter32,
|
|
rcKhiForwardingRofZagDpPortErr4 Counter32,
|
|
rcKhiForwardingRofZagDpPortErr5 Counter32,
|
|
rcKhiForwardingRofZagDpPortErr6 Counter32,
|
|
rcKhiForwardingRofZagDpPortErr7 Counter32,
|
|
rcKhiForwardingRofZagZag2HapErr Counter32,
|
|
rcKhiForwardingRofZagEtpEgrFifoErr Counter32,
|
|
rcKhiForwardingRofZagCifErrEvent Counter32,
|
|
rcKhiForwardingRofZagHabErrEvent Counter32,
|
|
rcKhiForwardingRofZagCifRxDropInfo Counter32,
|
|
rcKhiForwardingRofZagHabRxDropInfo Counter32,
|
|
rcKhiForwardingRofZagDpExtErr0 Counter32,
|
|
rcKhiForwardingRofZagDpExtErr1 Counter32,
|
|
rcKhiForwardingRofZagDpExtErr2 Counter32,
|
|
rcKhiForwardingRofZagDpExtErr3 Counter32,
|
|
rcKhiForwardingRofZagDpExtErr4 Counter32,
|
|
rcKhiForwardingRofZagDpExtErr5 Counter32,
|
|
rcKhiForwardingRofZagDpExtErr6 Counter32,
|
|
rcKhiForwardingRofZagDpExtErr7 Counter32
|
|
}
|
|
|
|
rcKhiForwardingRofZagErrSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofZagErrEntry 1 }
|
|
|
|
rcKhiForwardingRofZagErrSlice OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slice Number"
|
|
::= { rcKhiForwardingRofZagErrEntry 2 }
|
|
|
|
rcKhiForwardingRofZagErrLane OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Lane"
|
|
::= { rcKhiForwardingRofZagErrEntry 3 }
|
|
|
|
rcKhiForwardingRofZagPmmRspErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_RSP_ERROR"
|
|
::= { rcKhiForwardingRofZagErrEntry 4}
|
|
|
|
rcKhiForwardingRofZagPmmDpErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_DP_ERROR"
|
|
::= { rcKhiForwardingRofZagErrEntry 5}
|
|
|
|
rcKhiForwardingRofZagPmmFpErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_FP_ERROR"
|
|
::= { rcKhiForwardingRofZagErrEntry 6}
|
|
|
|
rcKhiForwardingRofZagPmmPmErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PMM_PM_ERROR"
|
|
::= { rcKhiForwardingRofZagErrEntry 7}
|
|
|
|
rcKhiForwardingRofZagFpErr0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_ERROR0"
|
|
::= { rcKhiForwardingRofZagErrEntry 8}
|
|
|
|
rcKhiForwardingRofZagFpErr1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FP_ERROR1"
|
|
::= { rcKhiForwardingRofZagErrEntry 9}
|
|
|
|
rcKhiForwardingRofZagDpPortErr0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR0"
|
|
::= { rcKhiForwardingRofZagErrEntry 10}
|
|
|
|
rcKhiForwardingRofZagDpPortErr1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR1"
|
|
::= { rcKhiForwardingRofZagErrEntry 11}
|
|
|
|
rcKhiForwardingRofZagDpPortErr2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR2"
|
|
::= { rcKhiForwardingRofZagErrEntry 12}
|
|
|
|
rcKhiForwardingRofZagDpPortErr3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR3"
|
|
::= { rcKhiForwardingRofZagErrEntry 13}
|
|
|
|
rcKhiForwardingRofZagDpPortErr4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR4"
|
|
::= { rcKhiForwardingRofZagErrEntry 14}
|
|
|
|
rcKhiForwardingRofZagDpPortErr5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR5"
|
|
::= { rcKhiForwardingRofZagErrEntry 15}
|
|
|
|
rcKhiForwardingRofZagDpPortErr6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR6"
|
|
::= { rcKhiForwardingRofZagErrEntry 16}
|
|
|
|
rcKhiForwardingRofZagDpPortErr7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR7"
|
|
::= { rcKhiForwardingRofZagErrEntry 17}
|
|
|
|
rcKhiForwardingRofZagZag2HapErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ZAG2_HAP_ERROR"
|
|
::= { rcKhiForwardingRofZagErrEntry 18}
|
|
|
|
rcKhiForwardingRofZagEtpEgrFifoErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ETP_EGR_FIFO_ERR"
|
|
::= { rcKhiForwardingRofZagErrEntry 19}
|
|
|
|
rcKhiForwardingRofZagCifErrEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF_ERROR_EVENT"
|
|
::= { rcKhiForwardingRofZagErrEntry 20}
|
|
|
|
rcKhiForwardingRofZagHabErrEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB_ERROR_EVENT"
|
|
::= { rcKhiForwardingRofZagErrEntry 21}
|
|
|
|
rcKhiForwardingRofZagCifRxDropInfo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CIF RX DROP INFO"
|
|
::= { rcKhiForwardingRofZagErrEntry 22}
|
|
|
|
rcKhiForwardingRofZagHabRxDropInfo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "HAB_RX_DROP_INFO"
|
|
::= { rcKhiForwardingRofZagErrEntry 23}
|
|
|
|
rcKhiForwardingRofZagDpExtErr0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR0"
|
|
::= { rcKhiForwardingRofZagErrEntry 24}
|
|
|
|
rcKhiForwardingRofZagDpExtErr1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR1"
|
|
::= { rcKhiForwardingRofZagErrEntry 25}
|
|
|
|
rcKhiForwardingRofZagDpExtErr2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR2"
|
|
::= { rcKhiForwardingRofZagErrEntry 26}
|
|
|
|
rcKhiForwardingRofZagDpExtErr3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR3"
|
|
::= { rcKhiForwardingRofZagErrEntry 27}
|
|
|
|
rcKhiForwardingRofZagDpExtErr4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR4"
|
|
::= { rcKhiForwardingRofZagErrEntry 28}
|
|
|
|
rcKhiForwardingRofZagDpExtErr5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR5"
|
|
::= { rcKhiForwardingRofZagErrEntry 29}
|
|
|
|
rcKhiForwardingRofZagDpExtErr6 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR6"
|
|
::= { rcKhiForwardingRofZagErrEntry 30}
|
|
|
|
rcKhiForwardingRofZagDpExtErr7 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DP_PORT_ERROR7"
|
|
::= { rcKhiForwardingRofZagErrEntry 31}
|
|
|
|
|
|
-- KHI Forwarding SIERRA Status table for Rof
|
|
|
|
rcKhiForwardingRofSierraStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofSierraStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Sierra State Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 17 }
|
|
|
|
rcKhiForwardingRofSierraStatusEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofSierraStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Sierra State KHI - RoF."
|
|
INDEX { rcKhiForwardingRofSierraStatusSlot }
|
|
::= { rcKhiForwardingRofSierraStatusTable 1 }
|
|
|
|
RcKhiForwardingRofSierraStatusEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofSierraStatusSlot Integer32,
|
|
rcKhiForwardingRofSierraDevId Counter32,
|
|
rcKhiForwardingRofSierraBuild Counter32,
|
|
rcKhiForwardingRofSierraBadData Counter32,
|
|
rcKhiForwardingRofSierraSbRexEvent Counter32,
|
|
rcKhiForwardingRofSierraRexStatus Counter32,
|
|
rcKhiForwardingRofSierraSbStatus Counter32,
|
|
rcKhiForwardingRofSierraSliceXWindowEvent Counter32,
|
|
rcKhiForwardingRofSierraPcieCoreStatus Counter32,
|
|
rcKhiForwardingRofSierraPcieEvent Counter32,
|
|
rcKhiForwardingRofSierraPSI1Status Counter32,
|
|
rcKhiForwardingRofSierraPSI0Status Counter32,
|
|
rcKhiForwardingRofSierraPSIEvent Counter32,
|
|
rcKhiForwardingRofSierraPSI1LinkStatus Counter32,
|
|
rcKhiForwardingRofSierraPSI0LinkStatus Counter32,
|
|
rcKhiForwardingRofSierraGeStatus Counter32,
|
|
rcKhiForwardingRofSierraGeEvent Counter32,
|
|
rcKhiForwardingRofSierraPktEvent Counter32,
|
|
rcKhiForwardingRofSierraZipStatus0 Counter32,
|
|
rcKhiForwardingRofSierraZipStatus1 Counter32,
|
|
rcKhiForwardingRofSierraZipStatus2 Counter32,
|
|
rcKhiForwardingRofSierraZipStatus3 Counter32,
|
|
rcKhiForwardingRofSierraZipStatus4 Counter32,
|
|
rcKhiForwardingRofSierraZipStatus5 Counter32,
|
|
rcKhiForwardingRofSierraZipEvent0 Counter32,
|
|
rcKhiForwardingRofSierraZipEvent1 Counter32,
|
|
rcKhiForwardingRofSierraZipEvent2 Counter32,
|
|
rcKhiForwardingRofSierraZipEvent3 Counter32,
|
|
rcKhiForwardingRofSierraZipEvent4 Counter32,
|
|
rcKhiForwardingRofSierraZipEvent5 Counter32,
|
|
rcKhiForwardingRofSierraSbmStatus0 Counter32,
|
|
rcKhiForwardingRofSierraSbmStatus1 Counter32,
|
|
rcKhiForwardingRofSierraSbmStatus2 Counter32,
|
|
rcKhiForwardingRofSierraSbmStatus3 Counter32,
|
|
rcKhiForwardingRofSierraSbmStatus4 Counter32,
|
|
rcKhiForwardingRofSierraSbmStatus5 Counter32,
|
|
rcKhiForwardingRofSierraSbmEvent0 Counter32,
|
|
rcKhiForwardingRofSierraSbmEvent1 Counter32,
|
|
rcKhiForwardingRofSierraSbmEvent2 Counter32,
|
|
rcKhiForwardingRofSierraSbmEvent3 Counter32,
|
|
rcKhiForwardingRofSierraSbmEvent4 Counter32,
|
|
rcKhiForwardingRofSierraSbmEvent5 Counter32,
|
|
rcKhiForwardingRofSierraSepEvent Counter32
|
|
}
|
|
|
|
|
|
rcKhiForwardingRofSierraStatusSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 1 }
|
|
|
|
rcKhiForwardingRofSierraDevId OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VSP assigned DEV_ID for this programmable device"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 2 }
|
|
|
|
rcKhiForwardingRofSierraBuild OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "contains the build date of this device"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 3 }
|
|
|
|
rcKhiForwardingRofSierraBadData OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "pkts received via HiGig0"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 4 }
|
|
|
|
rcKhiForwardingRofSierraSbRexEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "indicates various events have occurred related to the SBus and RexBus interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 5 }
|
|
|
|
rcKhiForwardingRofSierraRexStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "contained information to determin ehat type of error occured during SB_REX_EVENT"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 6 }
|
|
|
|
rcKhiForwardingRofSierraSbStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows which one of the RSPng or Zagros2 devices are ready to receive SB accesses"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 7 }
|
|
|
|
rcKhiForwardingRofSierraSliceXWindowEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "captures error information on failed accesses to/from the Slice Window "
|
|
::= { rcKhiForwardingRofSierraStatusEntry 8 }
|
|
|
|
rcKhiForwardingRofSierraPcieCoreStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "show 32 of the 512 available status signals from the Altera PCIe core"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 9 }
|
|
|
|
rcKhiForwardingRofSierraPcieEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "indicates when various PCIe related events have occurred"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 10 }
|
|
|
|
rcKhiForwardingRofSierraPSI1Status OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PSI1_STATUS Register related"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 11 }
|
|
|
|
rcKhiForwardingRofSierraPSI0Status OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PSI0_STATUS Register related"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 12 }
|
|
|
|
rcKhiForwardingRofSierraPSIEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PSI_EVENT Register related"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 13 }
|
|
|
|
rcKhiForwardingRofSierraPSI1LinkStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "contents of a LINK_STATUS message received by PSI 1"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 14 }
|
|
|
|
rcKhiForwardingRofSierraPSI0LinkStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "contents of a LINK_STATUS message received by PSI 0"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 15 }
|
|
|
|
rcKhiForwardingRofSierraGeStatus OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows status for the GE RGMII Interface"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 16 }
|
|
|
|
rcKhiForwardingRofSierraGeEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "indicates which GE related events have occurred since last cleared"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 17 }
|
|
|
|
rcKhiForwardingRofSierraPktEvent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "indicates which packet switching related events have occurred since last cleared"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 18 }
|
|
|
|
rcKhiForwardingRofSierraZipStatus0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows status for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 19 }
|
|
|
|
rcKhiForwardingRofSierraZipStatus1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows status for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 20 }
|
|
|
|
rcKhiForwardingRofSierraZipStatus2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows status for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 21 }
|
|
|
|
rcKhiForwardingRofSierraZipStatus3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows status for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 22 }
|
|
|
|
rcKhiForwardingRofSierraZipStatus4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows status for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 23 }
|
|
|
|
rcKhiForwardingRofSierraZipStatus5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows status for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 24 }
|
|
|
|
rcKhiForwardingRofSierraZipEvent0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows which events occurred for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 25 }
|
|
|
|
rcKhiForwardingRofSierraZipEvent1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows which events occurred for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 26 }
|
|
|
|
rcKhiForwardingRofSierraZipEvent2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows which events occurred for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 27 }
|
|
|
|
rcKhiForwardingRofSierraZipEvent3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows which events occurred for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 28 }
|
|
|
|
rcKhiForwardingRofSierraZipEvent4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows which events occurred for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 29 }
|
|
|
|
rcKhiForwardingRofSierraZipEvent5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "shows which events occurred for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 30 }
|
|
|
|
rcKhiForwardingRofSierraSbmStatus0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_STATUS Register related for ZIP interfaces "
|
|
::= { rcKhiForwardingRofSierraStatusEntry 31 }
|
|
|
|
rcKhiForwardingRofSierraSbmStatus1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_STATUS Register related for ZIP interfaces "
|
|
::= { rcKhiForwardingRofSierraStatusEntry 32 }
|
|
|
|
rcKhiForwardingRofSierraSbmStatus2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_STATUS Register related for ZIP interfaces "
|
|
::= { rcKhiForwardingRofSierraStatusEntry 33 }
|
|
|
|
rcKhiForwardingRofSierraSbmStatus3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_STATUS Register related for ZIP interfaces "
|
|
::= { rcKhiForwardingRofSierraStatusEntry 34 }
|
|
|
|
rcKhiForwardingRofSierraSbmStatus4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_STATUS Register related for ZIP interfaces "
|
|
::= { rcKhiForwardingRofSierraStatusEntry 35 }
|
|
|
|
rcKhiForwardingRofSierraSbmStatus5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_STATUS Register related for ZIP interfaces "
|
|
::= { rcKhiForwardingRofSierraStatusEntry 36 }
|
|
|
|
|
|
rcKhiForwardingRofSierraSbmEvent0 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_EVENT Register related for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 37 }
|
|
|
|
rcKhiForwardingRofSierraSbmEvent1 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_EVENT Register related for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 38 }
|
|
|
|
rcKhiForwardingRofSierraSbmEvent2 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_EVENT Register related for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 39 }
|
|
|
|
rcKhiForwardingRofSierraSbmEvent3 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_EVENT Register related for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 40 }
|
|
|
|
rcKhiForwardingRofSierraSbmEvent4 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_EVENT Register related for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 41 }
|
|
|
|
|
|
rcKhiForwardingRofSierraSbmEvent5 OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SBM_EVENT Register related for ZIP interfaces"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 42 }
|
|
|
|
rcKhiForwardingRofSierraSepEvent
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "various events(good/bad) that occur in the Script Engine Parsing logic section"
|
|
::= { rcKhiForwardingRofSierraStatusEntry 43 }
|
|
|
|
|
|
|
|
|
|
-- KHI Forwarding SIERRA Forw Stats table for Rof
|
|
|
|
rcKhiForwardingRofSierraForwStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofSierraForwStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Sierra Forw Stats Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 18 }
|
|
|
|
rcKhiForwardingRofSierraForwStatsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofSierraForwStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Sierra Forw Stats KHI - RoF."
|
|
INDEX { rcKhiForwardingRofSierraForwStatsSlot }
|
|
::= { rcKhiForwardingRofSierraForwStatsTable 1 }
|
|
|
|
|
|
RcKhiForwardingRofSierraForwStatsEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofSierraForwStatsSlot Integer32,
|
|
rcKhiForwardingRofSierraGeCntRxOk Counter64,
|
|
rcKhiForwardingRofSierraGeCntTxOk Counter64,
|
|
rcKhiForwardingRofSierraGeCntRxPause Counter64,
|
|
rcKhiForwardingRofSierraPktCntGeGe Counter64,
|
|
rcKhiForwardingRofSierraPktCntGeZ0 Counter64,
|
|
rcKhiForwardingRofSierraPktCntGeZ1 Counter64,
|
|
rcKhiForwardingRofSierraPktCntGeZ2 Counter64,
|
|
rcKhiForwardingRofSierraPktCntGeZ3 Counter64,
|
|
rcKhiForwardingRofSierraPktCntGeZ4 Counter64,
|
|
rcKhiForwardingRofSierraPktCntGeZ5 Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ0GeOk Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ1GeOk Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ2GeOk Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ3GeOk Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ4GeOk Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ5GeOk Counter64,
|
|
rcKhiForwardingRofSierraSepPcieCnt0 Counter64,
|
|
rcKhiForwardingRofSierraSepPcieCnt1 Counter64,
|
|
rcKhiForwardingRofSierraSepPcieCnt2 Counter64,
|
|
rcKhiForwardingRofSierraSepPcieCnt3 Counter64,
|
|
rcKhiForwardingRofSierraSepPcieCnt4 Counter64,
|
|
rcKhiForwardingRofSierraSepPcieCnt5 Counter64,
|
|
rcKhiForwardingRofSierraSepPcieCnt6 Counter64
|
|
}
|
|
|
|
|
|
rcKhiForwardingRofSierraForwStatsSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 1 }
|
|
|
|
rcKhiForwardingRofSierraGeCntRxOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of non-errored data packets received by the RX RGMII "
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 2 }
|
|
|
|
rcKhiForwardingRofSierraGeCntTxOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets transmitted by the RX RGMII logic that were not marked as errored beforehand"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 3 }
|
|
|
|
rcKhiForwardingRofSierraGeCntRxPause OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of dropped non-data and pause packets received by the RX RGMII "
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 4 }
|
|
|
|
rcKhiForwardingRofSierraPktCntGeGe OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets received by the GE interface and looped back out the GE interface"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 5 }
|
|
|
|
rcKhiForwardingRofSierraPktCntGeZ0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets of GE packets sent to ZIP 0"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 6 }
|
|
|
|
rcKhiForwardingRofSierraPktCntGeZ1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets of GE packets sent to ZIP 1"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 7 }
|
|
|
|
rcKhiForwardingRofSierraPktCntGeZ2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets of GE packets sent to ZIP 2"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 8 }
|
|
|
|
rcKhiForwardingRofSierraPktCntGeZ3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets of GE packets sent to ZIP 3"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 9 }
|
|
|
|
rcKhiForwardingRofSierraPktCntGeZ4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets of GE packets sent to ZIP 4"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 10 }
|
|
|
|
rcKhiForwardingRofSierraPktCntGeZ5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets of GE packets sent to ZIP 5"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 11 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ0GeOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of non-errored packets sent to GE from the ZIP 0 interface"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 12 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ1GeOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of non-errored packets sent to GE from the ZIP 1 interface"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 13 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ2GeOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of non-errored packets sent to GE from the ZIP 2 interface"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 14 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ3GeOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of non-errored packets sent to GE from the ZIP 3 interface"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 15 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ4GeOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of non-errored packets sent to GE from the ZIP 4 interface"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 16 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ5GeOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of non-errored packets sent to GE from the ZIP 5 interface"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 17 }
|
|
|
|
rcKhiForwardingRofSierraSepPcieCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of PCIe transactions"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 18 }
|
|
|
|
rcKhiForwardingRofSierraSepPcieCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of PCIe transactions"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 19 }
|
|
|
|
rcKhiForwardingRofSierraSepPcieCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of PCIe transactions"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 20 }
|
|
|
|
rcKhiForwardingRofSierraSepPcieCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of PCIe transactions"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 21 }
|
|
|
|
rcKhiForwardingRofSierraSepPcieCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of PCIe transactions"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 22 }
|
|
|
|
rcKhiForwardingRofSierraSepPcieCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of PCIe transactions"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 23 }
|
|
|
|
rcKhiForwardingRofSierraSepPcieCnt6 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "number of PCIe transactions"
|
|
::= { rcKhiForwardingRofSierraForwStatsEntry 24 }
|
|
|
|
|
|
|
|
-- KHI Forwarding SIERRA Extended Forw Stats table for Rof
|
|
|
|
rcKhiForwardingRofSierraExtendedForwStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofSierraExtendedForwStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Sierra Extended Forw Stats Key Health Indicator MIB for RoF. -- multiple instance counters"
|
|
::= { rcKhiForwardingCb 19 }
|
|
|
|
rcKhiForwardingRofSierraExtendedForwStatsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofSierraExtendedForwStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Sierra Extended Forw Stats KHI - RoF. -- multiple instance counters"
|
|
INDEX { rcKhiForwardingRofSierraExtendedForwStatsSlot }
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsTable 1 }
|
|
|
|
|
|
RcKhiForwardingRofSierraExtendedForwStatsEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofSierraExtendedForwStatsSlot Integer32,
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt5 Counter64
|
|
}
|
|
|
|
|
|
rcKhiForwardingRofSierraExtendedForwStatsSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 1 }
|
|
|
|
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of data fragments across the ZIP interface"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 2 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of data fragments across the ZIP interface"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 3 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of data fragments across the ZIP interface"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 4 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of data fragments across the ZIP interface"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 5 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of data fragments across the ZIP interface"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 6 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragDatCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of data fragments across the ZIP interface"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 7 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 8 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 9 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 10 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 11 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 12 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU0Cnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 13 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of RSP SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 14 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of RSP SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 15 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of RSP SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 16 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of RSP SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 17 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of RSP SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 18 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRspCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of RSP SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 19 }
|
|
|
|
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SB/PCIe SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 20 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SB/PCIe SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 21 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SB/PCIe SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 22 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SB/PCIe SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 23 }
|
|
|
|
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SB/PCIe SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 24 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragPcieCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SB/PCIe SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 25 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Hi Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 26 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Hi Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 27 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Hi Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 28 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Hi Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 29 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Hi Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 30 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSephCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Hi Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 31 }
|
|
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Lo Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 32 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Lo Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 33 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Lo Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 34 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Lo Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 35 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Lo Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 36 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragSeplCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of SEP Lo Pri SubCmd fragments transmitted"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 37 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 38 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 39 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 40 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 41 }
|
|
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 42 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU1Cnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 43 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 44 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 45 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 46 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 47 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 48 }
|
|
|
|
rcKhiForwardingRofSierraZipTxFragRFU2Cnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "reserved for future use"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 49 }
|
|
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 50 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 51 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 52 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 53 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 54 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatOkCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 55 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 56 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 57 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 58 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 59 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 60 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspOkCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 61 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 62 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 63 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 64 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 65 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 66 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieOkCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 67 }
|
|
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 68 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 69 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 70 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 71 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 72 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephOkCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 73 }
|
|
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 74 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 75 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 76 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 77 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 78 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplOkCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of ok SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraExtendedForwStatsEntry 79 }
|
|
|
|
|
|
|
|
|
|
|
|
-- KHI Forwarding SIERRA Drop Stats table for Rof
|
|
|
|
rcKhiForwardingRofSierraDropStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiForwardingRofSierraDropStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Sierra Drop Stats Key Health Indicator MIB for RoF."
|
|
::= { rcKhiForwardingCb 20 }
|
|
|
|
rcKhiForwardingRofSierraDropStatsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiForwardingRofSierraDropStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Forwarding Sierra Drop Stats KHI - RoF."
|
|
INDEX { rcKhiForwardingRofSierraDropStatsSlot }
|
|
::= { rcKhiForwardingRofSierraDropStatsTable 1 }
|
|
|
|
RcKhiForwardingRofSierraDropStatsEntry ::=
|
|
SEQUENCE {
|
|
rcKhiForwardingRofSierraDropStatsSlot Integer32,
|
|
rcKhiForwardingRofSierraGeCntRxErr Counter64,
|
|
rcKhiForwardingRofSierraGeCntTxErr Counter64,
|
|
rcKhiForwardingRofSierraPktCntGeDrop Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ0GeErr Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ1GeErr Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ2GeErr Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ3GeErr Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ4GeErr Counter64,
|
|
rcKhiForwardingRofSierraPktCntZ5GeErr Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt5 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt0 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt1 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt2 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt3 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt4 Counter64,
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt5 Counter64
|
|
}
|
|
|
|
|
|
rcKhiForwardingRofSierraDropStatsSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 1 }
|
|
|
|
rcKhiForwardingRofSierraGeCntRxErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of errored packets received by the RX RGMII logic"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 2 }
|
|
|
|
rcKhiForwardingRofSierraGeCntTxErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets transmitted by the GE RGMII logic that were marked as errored before hand"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 3 }
|
|
|
|
rcKhiForwardingRofSierraPktCntGeDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of packets received by the GE interface and then dropped"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 4 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ0GeErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of errored packets sent to GE from the ZIP 0 interface"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 5 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ1GeErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of errored packets sent to GE from the ZIP 1 interface"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 6 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ2GeErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of errored packets sent to GE from the ZIP 2"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 7 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ3GeErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of errored packets sent to GE from the ZIP 3"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 8 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ4GeErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of errored packets sent to GE from the ZIP 4"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 9 }
|
|
|
|
rcKhiForwardingRofSierraPktCntZ5GeErr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "counts the number of errored packets sent to GE from the ZIP 5"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 10 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 11 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 12 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 13 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 14 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 15 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDatErrCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored data frags received via the ZIP"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 16 }
|
|
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 17 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 18 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 19 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 20 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 21 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragRspErrCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored RSP SubCmd fragments received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 22 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 23 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 24 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 25 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 26 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 27 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragPcieErrCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SB/PCIe SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 28 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 29 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 30 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 31 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 32 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 33 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSephErrCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Hi Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 34 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 35 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 36 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 37 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 38 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 39 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragSeplErrCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of errored SEP Lo Pri SubCmd frags received"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 40 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 41 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 42 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 43 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 44 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 45 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragDropCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 46 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 47 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 48 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 49 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 50 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 51 }
|
|
|
|
rcKhiForwardingRofSierraZipRxFragInvctlCnt5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "count of frags dropped(usually due to bad headers)"
|
|
::= { rcKhiForwardingRofSierraDropStatsEntry 52 }
|
|
|
|
rcKhiCpp OBJECT IDENTIFIER ::= { rcKhi 12 }
|
|
|
|
rcKhiCppPortStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear Khi Cpp Port Statistics MIB - All VSP Data."
|
|
::= { rcKhiCpp 1 }
|
|
|
|
rcKhiCppIoCopStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear Khi Cpp Slot Statistics MIB - All VSP Data."
|
|
::= { rcKhiCpp 2 }
|
|
|
|
-- KHI Cpp Port Statistics Table
|
|
|
|
rcKhiCppPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiCppPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Khi Cpp Port Statistics MIB - All VSP Data."
|
|
::= { rcKhiCpp 3 }
|
|
|
|
rcKhiCppPortStatsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiCppPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Khi Cpp Port Statistics - VSP table entry."
|
|
INDEX { rcKhiCppPortStatsPort,
|
|
rcKhiCppPortStatsPacket }
|
|
::= { rcKhiCppPortStatsTable 1 }
|
|
|
|
RcKhiCppPortStatsEntry ::=
|
|
SEQUENCE {
|
|
rcKhiCppPortStatsPort InterfaceIndex,
|
|
rcKhiCppPortStatsPacket Integer32,
|
|
rcKhiCppPortStatsPacketName DisplayString,
|
|
rcKhiCppPortStatsRxPackets Counter64,
|
|
rcKhiCppPortStatsTxPackets Counter64
|
|
}
|
|
|
|
rcKhiCppPortStatsPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port Number-this entry contains information
|
|
about packet type, count of Rx and Tx packet"
|
|
::= { rcKhiCppPortStatsEntry 1 }
|
|
|
|
rcKhiCppPortStatsPacket OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1023)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Packet Type"
|
|
::= { rcKhiCppPortStatsEntry 2 }
|
|
|
|
rcKhiCppPortStatsPacketName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Name of the Packet"
|
|
::= { rcKhiCppPortStatsEntry 3 }
|
|
|
|
rcKhiCppPortStatsRxPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rx count for a particular Packet Type"
|
|
::= { rcKhiCppPortStatsEntry 4 }
|
|
|
|
rcKhiCppPortStatsTxPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Tx count for a particular Packet Type"
|
|
::= { rcKhiCppPortStatsEntry 5 }
|
|
|
|
-- KHI Cpp IoCop Statistics Table
|
|
|
|
rcKhiCppIoCopStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiCppIoCopStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Khi Cpp IoCop Statistics MIB - All VSP Data."
|
|
::= { rcKhiCpp 4 }
|
|
|
|
rcKhiCppIoCopStatsEntry OBJECT-TYPE
|
|
SYNTAX RcKhiCppIoCopStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Khi Cpp IoCop Statistics - VSP table entry."
|
|
INDEX { rcKhiCppIoCopStatsSlot }
|
|
::= { rcKhiCppIoCopStatsTable 1 }
|
|
|
|
RcKhiCppIoCopStatsEntry ::=
|
|
SEQUENCE {
|
|
rcKhiCppIoCopStatsSlot Integer32,
|
|
rcKhiCppIoCopStatsMacMgmtRxPackets Counter64,
|
|
rcKhiCppIoCopStatsIpFixRxPackets Counter64
|
|
}
|
|
|
|
rcKhiCppIoCopStatsSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (3..12)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot Number"
|
|
::= { rcKhiCppIoCopStatsEntry 1 }
|
|
|
|
rcKhiCppIoCopStatsMacMgmtRxPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MacMgmt Rx Packets"
|
|
::= { rcKhiCppIoCopStatsEntry 2 }
|
|
|
|
rcKhiCppIoCopStatsIpFixRxPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IpFix Rx Packets"
|
|
::= { rcKhiCppIoCopStatsEntry 3 }
|
|
|
|
rcKhiCppProtocolDrops OBJECT IDENTIFIER ::= { rcKhiCpp 5 }
|
|
|
|
rcKhiCppProtocolDropsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear all protocol drop counters"
|
|
::= { rcKhiCppProtocolDrops 1 }
|
|
|
|
rcKhiCppProtocolDropsDataExpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Data Exp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 2 }
|
|
|
|
rcKhiCppProtocolDropsTtlExpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ttl Exp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 3 }
|
|
|
|
rcKhiCppProtocolDropsIpmcDataCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ipmc Data Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 4 }
|
|
|
|
rcKhiCppProtocolDropsMacLearningCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac learning Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 5 }
|
|
|
|
rcKhiCppProtocolDropsIsIsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IsIs Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 6 }
|
|
|
|
rcKhiCppProtocolDropsBgpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bgp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 7 }
|
|
|
|
rcKhiCppProtocolDropsRipV1Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RipV1 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 8 }
|
|
|
|
rcKhiCppProtocolDropsRipV2Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RipV2 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 9 }
|
|
|
|
rcKhiCppProtocolDropsOspfMcCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ospf Mc Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 10 }
|
|
|
|
rcKhiCppProtocolDropsFtpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ftp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 11 }
|
|
|
|
rcKhiCppProtocolDropsTftpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Tftp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 12 }
|
|
|
|
rcKhiCppProtocolDropsSnmpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Snmp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 13 }
|
|
|
|
rcKhiCppProtocolDropsTelnetCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Telnet Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 14 }
|
|
|
|
rcKhiCppProtocolDropsSshCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ssh Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 15 }
|
|
|
|
rcKhiCppProtocolDropsRshCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rsh Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 16 }
|
|
|
|
rcKhiCppProtocolDropsIstCtlCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IstCtl Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 17 }
|
|
|
|
rcKhiCppProtocolDropsRadiusCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Radius Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 18 }
|
|
|
|
rcKhiCppProtocolDropsNtpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ntp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 19 }
|
|
|
|
rcKhiCppProtocolDropsDhcpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dhcp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 20 }
|
|
|
|
rcKhiCppProtocolDropsIcmpV4Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IcmpV4 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 21 }
|
|
|
|
rcKhiCppProtocolDropsIcmpV6Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "IcmpV6 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 22 }
|
|
|
|
rcKhiCppProtocolDropsIgmpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Igmp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 23 }
|
|
|
|
rcKhiCppProtocolDropsPimMcCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Pim Mc Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 24 }
|
|
|
|
rcKhiCppProtocolDropsVrrpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vrrp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 25 }
|
|
|
|
rcKhiCppProtocolDropsArpReqCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Arp Req Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 26 }
|
|
|
|
rcKhiCppProtocolDropsArpOtherCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Arp Other Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 27 }
|
|
|
|
rcKhiCppProtocolDropsRarpReqCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rarp Req Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 28 }
|
|
|
|
rcKhiCppProtocolDropsRarpOtherCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rarp Other Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 29 }
|
|
|
|
rcKhiCppProtocolDropsSlppCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Slpp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 30 }
|
|
|
|
rcKhiCppProtocolDropsBpduCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bpdu Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 31 }
|
|
|
|
rcKhiCppProtocolDropsTdpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Tdp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 32 }
|
|
|
|
rcKhiCppProtocolDropsEapCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Eap Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 33 }
|
|
|
|
rcKhiCppProtocolDropsLacpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Lacp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 34 }
|
|
|
|
rcKhiCppProtocolDropsVlacpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlacp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 35 }
|
|
|
|
rcKhiCppProtocolDropsMldV2Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mld V2 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 36 }
|
|
|
|
rcKhiCppProtocolDropsLldpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Lldp Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 37 }
|
|
|
|
rcKhiCppProtocolDropsHttpCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Http Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 38 }
|
|
|
|
rcKhiCppProtocolDropsPimUcCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Pim Uc Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 39 }
|
|
|
|
rcKhiCppProtocolDropsOspfUcCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ospf Uc Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 40 }
|
|
|
|
rcKhiCppProtocolDropsDnsCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Dns Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 41 }
|
|
|
|
rcKhiCppProtocolDropsIcmpBcCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Icmp Bc Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 42 }
|
|
|
|
rcKhiCppProtocolDropsIpfixCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ipfix Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 43 }
|
|
|
|
rcKhiCppProtocolDropsTestPktCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Test Pkt Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 44 }
|
|
|
|
rcKhiCppProtocolDropsIcmpV4BcCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Icmp V4 Bc Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 45 }
|
|
|
|
rcKhiCppProtocolDropsOspfV6UcCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "OSPF V6 Uc Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 46 }
|
|
|
|
rcKhiCppProtocolDropsOspfV6McCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "OSPF V6 Mc Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 47 }
|
|
|
|
rcKhiCppProtocolDropsHopByHopCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Hop By Hop Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 48 }
|
|
|
|
rcKhiCppProtocolDropsCfmCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CFM Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 49 }
|
|
|
|
rcKhiCppProtocolDropsRipV6Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "RIP V6 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 50 }
|
|
|
|
rcKhiCppProtocolDropsVrrpV6Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VRRP V6 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 51 }
|
|
|
|
rcKhiCppProtocolDropsNdMcV6Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ND MC V6 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 52 }
|
|
|
|
rcKhiCppProtocolDropsNdUcV6Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ND UC V6 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 53 }
|
|
|
|
rcKhiCppProtocolDropsIcmpMcV6Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ICMP MC V6 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 54 }
|
|
|
|
rcKhiCppProtocolDropsIcmpUcV6Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ICMP UC V6 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 55 }
|
|
|
|
rcKhiCppProtocolDropsFragUcV6Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FRAG UC V6 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 56 }
|
|
|
|
rcKhiCppProtocolDropsFragMcV6Cnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FRAG MC V6 Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 57 }
|
|
|
|
rcKhiCppProtocolDropsRloginCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rlogin Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 58 }
|
|
|
|
rcKhiCppProtocolDropsIngressOAMCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ingress OAM Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 59 }
|
|
|
|
rcKhiCppProtocolDropsEgressOAMCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Egress OAM Drop Counter"
|
|
::= { rcKhiCppProtocolDrops 60 }
|
|
|
|
rcKhiMonitoring OBJECT IDENTIFIER ::= { rcKhi 13 }
|
|
|
|
|
|
rcKhiMonitoringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcKhiMonitoringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Khi monitoring Data"
|
|
::= { rcKhiMonitoring 1 }
|
|
|
|
rcKhiMonitoringEntry OBJECT-TYPE
|
|
SYNTAX RcKhiMonitoringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Khi Monitoring line card entry."
|
|
INDEX { rcKhiMonitoringSlot }
|
|
::= { rcKhiMonitoringTable 1 }
|
|
|
|
RcKhiMonitoringEntry ::=
|
|
SEQUENCE {
|
|
rcKhiMonitoringSlot Integer32,
|
|
rcKhiMonitoringAMRXErrThreshold Integer32,
|
|
rcKhiMonitoringAMShortPktErrThreshold Integer32,
|
|
rcKhiMonitoringAMExpPktThreshold Integer32,
|
|
rcKhiMonitoringAMCongestionDropThreshold Integer32,
|
|
rcKhiMonitoringAMProcErrThreshold Integer32,
|
|
rcKhiMonitoringPMProcErrThreshold Integer32,
|
|
rcKhiMonitoringFabricDropsThreshold Integer32,
|
|
rcKhiMonitoringPoliceDropsThreshold Integer32,
|
|
rcKhiMonitoringFoqDropsThreshold Integer32,
|
|
rcKhiMonitoringLegacyDropsThreshold Integer32
|
|
}
|
|
|
|
rcKhiMonitoringSlot OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique index used to identify a particular
|
|
slot of line card in the system."
|
|
::= { rcKhiMonitoringEntry 1 }
|
|
|
|
rcKhiMonitoringAMRXErrThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "AM RX error threshold."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 2 }
|
|
|
|
rcKhiMonitoringAMShortPktErrThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "AM Short packet error threshold."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 3 }
|
|
|
|
rcKhiMonitoringAMExpPktThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "AM Exp Packet threshold."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 4 }
|
|
|
|
rcKhiMonitoringAMCongestionDropThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "AM Congestion Drop threshold."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 5 }
|
|
|
|
rcKhiMonitoringAMProcErrThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "AM proc Error."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 6 }
|
|
|
|
rcKhiMonitoringPMProcErrThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PM proc Error."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 7 }
|
|
|
|
rcKhiMonitoringFabricDropsThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Fabric drops."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 8 }
|
|
|
|
rcKhiMonitoringPoliceDropsThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Police Drops."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 9 }
|
|
|
|
rcKhiMonitoringFoqDropsThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Foq Drops."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 10 }
|
|
|
|
rcKhiMonitoringLegacyDropsThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(100..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Legacy Drops."
|
|
DEFVAL { 10000 }
|
|
::= { rcKhiMonitoringEntry 11}
|
|
|
|
---rcKHI FEONA detail Information
|
|
|
|
rcKhiFeOna OBJECT IDENTIFIER ::= { rcKhi 14 }
|
|
|
|
rcKhiFeOnaGlobal OBJECT IDENTIFIER ::= { rcKhiFeOna 1 }
|
|
|
|
rcKhiFeOnaGlobalDevPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays the port number of the 4k device to which the Device Port of ONA is connected"
|
|
::= {rcKhiFeOnaGlobal 1}
|
|
|
|
rcKhiFeOnaGlobalDevPortStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Device Port Status
|
|
if value=TRUE Status = UP
|
|
if value=FALSE Status = DOWN"
|
|
DEFVAL { false }
|
|
::= {rcKhiFeOnaGlobal 2}
|
|
|
|
rcKhiFeOnaGlobalLldpPortStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays LLDP Status On ONA Device port
|
|
if value=TRUE Status = Enabled
|
|
if value=FALSE Status = Disabled "
|
|
DEFVAL { false }
|
|
::= {rcKhiFeOnaGlobal 3}
|
|
|
|
rcKhiFeOnaGlobalMgmtIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Management IP "
|
|
::= {rcKhiFeOnaGlobal 4}
|
|
|
|
rcKhiFeOnaGlobalTunnelSourceIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays Tunnel Source IP Address"
|
|
::= {rcKhiFeOnaGlobal 5}
|
|
|
|
rcKhiFeOnaGlobalMTU OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays Tunnel MTU "
|
|
::= {rcKhiFeOnaGlobal 6}
|
|
|
|
rcKhiFeOnaGlobalDevStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Device Status
|
|
if value=TRUE Status = UP
|
|
if value=FALSE Status = DOWN"
|
|
DEFVAL { false }
|
|
::= {rcKhiFeOnaGlobal 7}
|
|
|
|
rcKhiFeOnaGlobalNetPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays the port number of the 4k device to which the Network Port of ONA is connected"
|
|
::= {rcKhiFeOnaGlobal 8}
|
|
|
|
rcKhiFeOnaGlobalMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA MAC(ARP) Address"
|
|
::={rcKhiFeOnaGlobal 9}
|
|
|
|
rcKhiFeOnaGlobalMgmtVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Management Vlan Id"
|
|
::={rcKhiFeOnaGlobal 10}
|
|
|
|
rcKhiFeOnaGlobalMgmtVlanIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Management Vlan IP(Configured on 4K)"
|
|
::={rcKhiFeOnaGlobal 11}
|
|
|
|
rcKhiFeOnaGlobalGatewayIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Gateway IP (As Discovered by ONA )"
|
|
::={rcKhiFeOnaGlobal 12}
|
|
|
|
rcKhiFeOnaGlobalMgmtIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Management IP Mask (Obtained From ONA)"
|
|
::={rcKhiFeOnaGlobal 13}
|
|
|
|
rcKhiFeOnaGlobalBootMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
fa(1),
|
|
fe(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Bootmode (Obtained from ONA)"
|
|
::={rcKhiFeOnaGlobal 14}
|
|
|
|
rcKhiFeOnaGlobalUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays the ONA Uptime"
|
|
::={rcKhiFeOnaGlobal 15}
|
|
|
|
rcKhiFeOnaGlobalPbitToDscpMap OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays Port bit To Dscp Map i.e
|
|
Pbit To Dscp Map : p0=0 p1=0 p2=10 p3=18 p4=26 p5=34 p6=46 p7=46 "
|
|
::={rcKhiFeOnaGlobal 16}
|
|
|
|
rcKhiFeOnaGlobalVrf OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays the Vrf Name if Vrf is configured"
|
|
::={rcKhiFeOnaGlobal 17}
|
|
|
|
|
|
---rcKHI FE-ONA Status Information
|
|
|
|
rcKhiFeOnaStatus OBJECT IDENTIFIER ::= { rcKhiFeOna 2}
|
|
|
|
|
|
rcKhiFeOnaStatusDevice OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Device Status
|
|
if value=TRUE Status = UP
|
|
if value=FALSE Status = DOWN"
|
|
DEFVAL { false }
|
|
::= {rcKhiFeOnaStatus 1}
|
|
|
|
rcKhiFeOnaStatusDownReason OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays ONA Down Reason if ONA Device Status is down"
|
|
::= {rcKhiFeOnaStatus 2}
|
|
|
|
rcKhiFeOnaStatusRunRelease OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays Running Release Name"
|
|
::= {rcKhiFeOnaStatus 3}
|
|
|
|
rcKhiFeOnaStatusImageUpgradeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
unknown(1),
|
|
downloadInProgress(2),
|
|
downloadFailed(3),
|
|
upgradeInProgress(4),
|
|
upgradeFailed(5),
|
|
upgradeSuccess(6),
|
|
notInProgress(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays Image Upgrade Status"
|
|
::= {rcKhiFeOnaStatus 4}
|
|
|
|
rcKhiFeOnaStatusImageFileUsed OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Displays Image File Used For Upgrade"
|
|
::= {rcKhiFeOnaStatus 5}
|
|
|
|
-- Begin of IpMRoute MIB
|
|
rcIpMRouteMIBObjects OBJECT IDENTIFIER ::= { rcIpMRoute 1 }
|
|
|
|
rcIpMRouteScalars OBJECT IDENTIFIER ::= { rcIpMRouteMIBObjects 1 }
|
|
|
|
-- The IP Multicast Stats enable.
|
|
--
|
|
rcIpMRouteStatsEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled status of IP Multicast statistics."
|
|
DEFVAL { false }
|
|
::= { rcIpMRouteScalars 2 }
|
|
|
|
rcIpMRouteStatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear ip mroute stats."
|
|
DEFVAL { false }
|
|
::= { rcIpMRouteScalars 3 }
|
|
|
|
-- The IP Multicast Stats Table
|
|
--
|
|
rcIpMRouteStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpMRouteStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the table containing IP Multicast statistics."
|
|
::= { rcIpMRouteMIBObjects 6 }
|
|
|
|
rcIpMRouteStatsEntry OBJECT-TYPE
|
|
SYNTAX RcIpMRouteStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing the ip multicast statistics
|
|
information for the specific group ip address."
|
|
INDEX { rcIpMRouteStatsGroupAddress }
|
|
::= { rcIpMRouteStatsTable 1 }
|
|
|
|
RcIpMRouteStatsEntry ::= SEQUENCE {
|
|
rcIpMRouteStatsGroupAddress IpAddress,
|
|
rcIpMRouteStatsSourceCount Counter32,
|
|
rcIpMRouteStatsPkts Counter64,
|
|
rcIpMRouteStatsBytes Counter64,
|
|
rcIpMRouteStatsAverageSizePerPkt Integer32,
|
|
rcIpMRouteStatsDropPkts Counter64,
|
|
rcIpMRouteStatsDropBytes Counter64,
|
|
rcIpMRouteStatsPktsPerSecond Integer32
|
|
}
|
|
|
|
rcIpMRouteStatsGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the IP multicast group address for which this entry
|
|
contains ip multicast statistics."
|
|
::= { rcIpMRouteStatsEntry 1 }
|
|
|
|
rcIpMRouteStatsSourceCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sources corresponding to the specific group and vrf."
|
|
::= { rcIpMRouteStatsEntry 2 }
|
|
|
|
rcIpMRouteStatsPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of frames that are processed
|
|
corresponding to the specific group and vrf."
|
|
::= { rcIpMRouteStatsEntry 3 }
|
|
|
|
rcIpMRouteStatsBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes that are processed
|
|
corresponding to the specific group and vrf."
|
|
::= { rcIpMRouteStatsEntry 4 }
|
|
|
|
rcIpMRouteStatsAverageSizePerPkt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average length of packets that are processed
|
|
corresponding to the specific group and vrf."
|
|
::= { rcIpMRouteStatsEntry 5 }
|
|
|
|
rcIpMRouteStatsDropPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of drop frames that are processed
|
|
corresponding to the specific group and vrf."
|
|
::= { rcIpMRouteStatsEntry 6 }
|
|
|
|
rcIpMRouteStatsDropBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of drop bytes that are processed
|
|
corresponding to the specific group and vrf."
|
|
::= { rcIpMRouteStatsEntry 7 }
|
|
|
|
rcIpMRouteStatsPktsPerSecond OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets that are processed
|
|
corresponding to the specific group and vrf in one second."
|
|
::= { rcIpMRouteStatsEntry 8 }
|
|
|
|
-- End of IpMRoute MIB
|
|
|
|
-- Begin of IPv6 MRoute MIB
|
|
-- The commented elements are currently not supported but are left in the mib
|
|
-- for possible future implementation, as per PLM request (Seema Sirivara)
|
|
|
|
rcMRouteIpv6Objects OBJECT IDENTIFIER ::= { rcMRouteIpv6 1 }
|
|
|
|
-- the IPv6 Multicast Routing MIB-Group
|
|
--
|
|
-- a collection of objects providing information about
|
|
-- IPv6 Multicast Groups
|
|
|
|
rcMRouteIpv6Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMRouteIpv6Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing multicast routing
|
|
information for IPv6 datagrams sent by particular sources to
|
|
the IPv6 multicast groups known to this router."
|
|
::= { rcMRouteIpv6Objects 1 }
|
|
|
|
rcMRouteIpv6Entry OBJECT-TYPE
|
|
SYNTAX RcMRouteIpv6Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the multicast routing
|
|
information for IPv6 datagrams from a particular source and
|
|
addressed to a particular IPv6 multicast group address."
|
|
INDEX { rcMRouteIpv6Group,
|
|
rcMRouteIpv6Source,
|
|
rcMRouteIpv6SourceMask }
|
|
::= { rcMRouteIpv6Table 1 }
|
|
|
|
RcMRouteIpv6Entry ::= SEQUENCE {
|
|
rcMRouteIpv6Group Ipv6Address,
|
|
rcMRouteIpv6Source Ipv6Address,
|
|
rcMRouteIpv6SourceMask Ipv6Address,
|
|
rcMRouteIpv6UpstreamNeighbor Ipv6Address,
|
|
rcMRouteIpv6InIfIndex Integer32,
|
|
-- rcMRouteIpv6UpTime TimeTicks,
|
|
rcMRouteIpv6ExpiryTime TimeTicks,
|
|
-- rcMRouteIpv6Pkts Counter32,
|
|
-- rcMRouteIpv6DifferentInIfPackets Counter32,
|
|
-- rcMRouteIpv6Octets Counter32,
|
|
rcMRouteIpv6Protocol INTEGER
|
|
}
|
|
|
|
rcMRouteIpv6Group OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { rcMRouteIpv6Entry 1 }
|
|
|
|
rcMRouteIpv6Source OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network address which when combined with the
|
|
corresponding value of rcMRouteIpv6SourceMask identifies the
|
|
sources for which this entry contains multicast routing
|
|
information."
|
|
::= { rcMRouteIpv6Entry 2 }
|
|
|
|
rcMRouteIpv6SourceMask OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask which when combined with the corresponding
|
|
value of rcMRouteIpv6Source identifies the sources for which
|
|
this entry contains multicast routing information."
|
|
::= { rcMRouteIpv6Entry 3 }
|
|
|
|
rcMRouteIpv6UpstreamNeighbor OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the upstream neighbor (e.g., RPF neighbor)
|
|
from which IPv6 datagrams from these sources to this multicast
|
|
address are received."
|
|
::= { rcMRouteIpv6Entry 4 }
|
|
|
|
rcMRouteIpv6InIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface on which IPv6
|
|
datagrams sent by these sources to this multicast address
|
|
are received. A value of 0 indicates that datagrams are not
|
|
subject to an incoming interface check, but may be accepted
|
|
on multiple interfaces."
|
|
::= { rcMRouteIpv6Entry 5 }
|
|
|
|
--rcMRouteIpv6UpTime OBJECT-TYPE
|
|
-- SYNTAX TimeTicks
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The time since the multicast routing information
|
|
-- represented by this entry was learned by the router."
|
|
-- ::= { rcMRouteIpv6Entry 6 }
|
|
|
|
rcMRouteIpv6ExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum amount of time remaining before this entry will
|
|
be aged out. The value 0 indicates that the entry is not
|
|
subject to aging."
|
|
::= { rcMRouteIpv6Entry 7 }
|
|
|
|
--rcMRouteIpv6Pkts OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of packets which this router has received from
|
|
-- these sources and addressed to this multicast group
|
|
-- address."
|
|
-- ::= { rcMRouteIpv6Entry 8 }
|
|
|
|
--rcMRouteIpv6DifferentInIfPackets OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of packets which this router has received from
|
|
-- these sources and addressed to this multicast group address,
|
|
-- which were not received from the interface indicated by
|
|
-- rcMRouteIpv6InIfIndex."
|
|
-- ::= { rcMRouteIpv6Entry 9 }
|
|
|
|
--rcMRouteIpv6Octets OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of octets contained in IPv6 datagrams which were
|
|
-- received from these sources and addressed to this multicast
|
|
-- group address, and which were forwarded by this router."
|
|
-- ::= { rcMRouteIpv6Entry 10 }
|
|
|
|
rcMRouteIpv6Protocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
pimSparseMode(2),
|
|
pimSsmMode(3),
|
|
mldOnly(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this route was learned."
|
|
::= { rcMRouteIpv6Entry 11 }
|
|
|
|
--
|
|
-- The IPv6 Multicast Routing Next Hop Table
|
|
--
|
|
|
|
rcMRouteIpv6NextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMRouteIpv6NextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing information on the next
|
|
hops on outgoing interfaces for routing IPv6 multicast
|
|
datagrams. Each entry is one of a list of next hops on
|
|
outgoing interfaces for particular sources sending to a
|
|
particular multicast group address."
|
|
::= { rcMRouteIpv6Objects 2 }
|
|
|
|
rcMRouteIpv6NextHopEntry OBJECT-TYPE
|
|
SYNTAX RcMRouteIpv6NextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the list of next hops on
|
|
outgoing interfaces to which IPv6 multicast datagrams from
|
|
particular sources to a IPv6 multicast group address are
|
|
routed."
|
|
INDEX { rcMRouteIpv6NextHopGroup, rcMRouteIpv6NextHopSource,
|
|
rcMRouteIpv6NextHopSourceMask, rcMRouteIpv6NextHopIfIndex,
|
|
rcMRouteIpv6NextHopAddress }
|
|
::= { rcMRouteIpv6NextHopTable 1 }
|
|
|
|
RcMRouteIpv6NextHopEntry ::= SEQUENCE {
|
|
rcMRouteIpv6NextHopGroup Ipv6Address,
|
|
rcMRouteIpv6NextHopSource Ipv6Address,
|
|
rcMRouteIpv6NextHopSourceMask Ipv6Address,
|
|
rcMRouteIpv6NextHopIfIndex Integer32,
|
|
rcMRouteIpv6NextHopAddress Ipv6Address,
|
|
rcMRouteIpv6NextHopState INTEGER,
|
|
-- rcMRouteIpv6NextHopUpTime TimeTicks,
|
|
rcMRouteIpv6NextHopExpiryTime TimeTicks,
|
|
rcMRouteIpv6NextHopClosestMemberHops Integer32,
|
|
rcMRouteIpv6NextHopProtocol INTEGER
|
|
-- rcMRouteIpv6NextHopPkts Counter32
|
|
}
|
|
|
|
rcMRouteIpv6NextHopGroup OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 multicast group for which this entry specifies a
|
|
next hop on an outgoing interface."
|
|
::= { rcMRouteIpv6NextHopEntry 1 }
|
|
|
|
rcMRouteIpv6NextHopSource OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network address which when combined with the
|
|
corresponding value of rcMRouteIpv6NextHopSourceMask identifies
|
|
the sources for which this entry specifies a next hop on an
|
|
outgoing interface."
|
|
::= { rcMRouteIpv6NextHopEntry 2 }
|
|
|
|
rcMRouteIpv6NextHopSourceMask OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask which when combined with the corresponding
|
|
value of rcMRouteIpv6NextHopSource identifies the sources for
|
|
which this entry specifies a next hop on an outgoing
|
|
interface."
|
|
::= { rcMRouteIpv6NextHopEntry 3 }
|
|
|
|
rcMRouteIpv6NextHopIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface for the outgoing
|
|
interface for this next hop."
|
|
::= { rcMRouteIpv6NextHopEntry 4 }
|
|
|
|
rcMRouteIpv6NextHopAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the next hop specific to this entry. For
|
|
most interfaces, this is identical to rcMRouteIpv6NextHopGroup.
|
|
NBMA interfaces, however, may have multiple next hop
|
|
addresses out a single outgoing interface."
|
|
::= { rcMRouteIpv6NextHopEntry 5 }
|
|
|
|
rcMRouteIpv6NextHopState OBJECT-TYPE
|
|
SYNTAX INTEGER { pruned(1), forwarding(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether the outgoing interface and next
|
|
hop represented by this entry is currently being used to
|
|
forward IPv6 datagrams. The value 'forwarding' indicates it
|
|
is currently being used; the value 'pruned' indicates it is
|
|
not."
|
|
::= { rcMRouteIpv6NextHopEntry 6 }
|
|
|
|
--rcMRouteIpv6NextHopUpTime OBJECT-TYPE
|
|
-- SYNTAX TimeTicks
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The time since the multicast routing information
|
|
-- represented by this entry was learned by the router."
|
|
-- ::= { rcMRouteIpv6NextHopEntry 7 }
|
|
|
|
rcMRouteIpv6NextHopExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum amount of time remaining before this entry will
|
|
be aged out. The value 0 indicates that the entry is not
|
|
subject to aging."
|
|
::= { rcMRouteIpv6NextHopEntry 8 }
|
|
|
|
rcMRouteIpv6NextHopClosestMemberHops OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of hops between this router and any
|
|
member of this IPv6 multicast group reached via this next hop
|
|
on this outgoing interface. Any IPv6 multicast datagrams for
|
|
the group which have a TTL less than this number of hops
|
|
will not be forwarded to this next hop."
|
|
::= { rcMRouteIpv6NextHopEntry 9 }
|
|
|
|
rcMRouteIpv6NextHopProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
pimSparseMode(2),
|
|
pimSsmMode(3),
|
|
mldOnly(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this next-hop was learned."
|
|
::= { rcMRouteIpv6NextHopEntry 10 }
|
|
|
|
--rcMRouteIpv6NextHopPkts OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of packets which have been forwarded using this
|
|
-- route."
|
|
-- ::= { rcMRouteIpv6NextHopEntry 11 }
|
|
|
|
|
|
--
|
|
-- The Multicast Routing Interface Table
|
|
--
|
|
|
|
rcMRouteIpv6InterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMRouteIpv6InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containg multicast routing
|
|
information specific to interfaces."
|
|
::= { rcMRouteIpv6Objects 3 }
|
|
|
|
rcMRouteIpv6InterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcMRouteIpv6InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the multicast routing
|
|
information for a particular interface."
|
|
INDEX { rcMRouteIpv6InterfaceIfIndex }
|
|
::= { rcMRouteIpv6InterfaceTable 1 }
|
|
|
|
RcMRouteIpv6InterfaceEntry ::= SEQUENCE {
|
|
rcMRouteIpv6InterfaceIfIndex Integer32,
|
|
rcMRouteIpv6InterfaceTtl Integer32,
|
|
rcMRouteIpv6InterfaceProtocol INTEGER
|
|
-- rcMRouteIpv6InterfaceRateLimit Integer32,
|
|
-- rcMRouteIpv6InterfaceInMcastOctets Counter32,
|
|
-- rcMRouteIpv6InterfaceOutMcastOctets Counter32,
|
|
-- rcMRouteIpv6InterfaceHCInMcastOctets Counter64,
|
|
-- rcMRouteIpv6InterfaceHCOutMcastOctets Counter64
|
|
}
|
|
|
|
rcMRouteIpv6InterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface for which this entry
|
|
contains information."
|
|
::= { rcMRouteIpv6InterfaceEntry 1 }
|
|
|
|
rcMRouteIpv6InterfaceTtl OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The datagram TTL threshold for the interface. Any IPv6
|
|
multicast datagrams with a TTL less than this threshold will
|
|
not be forwarded out the interface. The default value of 0
|
|
means all multicast packets are forwarded out the
|
|
interface."
|
|
::= { rcMRouteIpv6InterfaceEntry 2 }
|
|
|
|
rcMRouteIpv6InterfaceProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
pimSparseMode(2),
|
|
pimSsmMode(3),
|
|
mldOnly(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing protocol running on this interface."
|
|
::= { rcMRouteIpv6InterfaceEntry 3 }
|
|
|
|
--rcMRouteIpv6InterfaceRateLimit OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The rate-limit, in kilobits per second, of forwarded
|
|
-- multicast traffic on the interface. A rate-limit of 0
|
|
-- indicates that no rate limiting is done."
|
|
-- DEFVAL { 0 }
|
|
-- ::= { rcMRouteIpv6InterfaceEntry 4 }
|
|
|
|
--rcMRouteIpv6InterfaceInMcastOctets OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of octets of multicast packets that have arrived
|
|
-- on the interface."
|
|
-- ::= { rcMRouteIpv6InterfaceEntry 5 }
|
|
|
|
--rcMRouteIpv6InterfaceOutMcastOctets OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of octets of multicast packets that have been
|
|
-- sent on the interface."
|
|
-- ::= { rcMRouteIpv6InterfaceEntry 6 }
|
|
|
|
--rcMRouteIpv6InterfaceHCInMcastOctets OBJECT-TYPE
|
|
-- SYNTAX Counter64
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of octets of multicast packets that have arrived
|
|
-- on the interface. This object is a 64-bit version of
|
|
-- rcMRouteIpv6InterfaceInMcastOctets."
|
|
-- ::= { rcMRouteIpv6InterfaceEntry 7 }
|
|
|
|
--rcMRouteIpv6InterfaceHCOutMcastOctets OBJECT-TYPE
|
|
-- SYNTAX Counter64
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of octets of multicast packets that have been
|
|
-- sent on the interface. This object is a 64-bit version of
|
|
-- rcMRouteIpv6InterfaceOutMcastOctets."
|
|
-- ::= { rcMRouteIpv6InterfaceEntry 8 }
|
|
|
|
|
|
|
|
rcMRouteIpv6Statistics OBJECT IDENTIFIER ::= { rcMRouteIpv6 2 }
|
|
|
|
rcMRouteIpv6UsageGlobal OBJECT IDENTIFIER ::= { rcMRouteIpv6Statistics 1 }
|
|
|
|
rcMRouteIpv6IngressRecInUse OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to get the IPv6 Ingress Record Usage in the switch.
|
|
(S-G usage)."
|
|
::= { rcMRouteIpv6UsageGlobal 1 }
|
|
|
|
rcMRouteIpv6EgressRecInUse OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to get the IPv6 Egress Record Usage in the switch
|
|
(pepstream count)."
|
|
::= { rcMRouteIpv6UsageGlobal 2 }
|
|
|
|
rcMRouteIpv6IngressThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to get the threshold count for IPv6 Ingress records."
|
|
DEFVAL { 0 }
|
|
::= { rcMRouteIpv6UsageGlobal 3 }
|
|
|
|
rcMRouteIpv6EgressThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to get threshold count for IPv6 Egress records."
|
|
DEFVAL { 0 }
|
|
::= { rcMRouteIpv6UsageGlobal 4 }
|
|
|
|
rcMRouteIpv6SendTrapAndLog OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A means of alerting the user. If this bool is set,
|
|
a message will be send to console and also a
|
|
trap will be sent."
|
|
DEFVAL { false }
|
|
::= { rcMRouteIpv6UsageGlobal 5 }
|
|
|
|
rcMRouteIpv6SendTrapOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A means of alerting the user. If this bool is set,
|
|
a trap will be sent."
|
|
DEFVAL { false }
|
|
::= { rcMRouteIpv6UsageGlobal 6 }
|
|
rcMRouteIpv6LogMsgOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A means of alerting the user.If this bool is set,
|
|
a message will be sent to console."
|
|
DEFVAL { false }
|
|
::= { rcMRouteIpv6UsageGlobal 7 }
|
|
|
|
|
|
-- End of IPv6 MRoute MIB
|
|
|
|
-- rcVspTalk MIB: Messaging service MIB
|
|
|
|
rcVspTalkObjects OBJECT IDENTIFIER ::= { rcVspTalk 1 }
|
|
rcVspTalkScalars OBJECT IDENTIFIER ::= { rcVspTalkObjects 1 }
|
|
|
|
rcVspTalkGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Create or destroy the VSPTalk related data structure and threads.
|
|
When it is false, rcVspTalkGroupTable entry will be removed."
|
|
DEFVAL { false }
|
|
::= { rcVspTalkScalars 1 }
|
|
|
|
rcVspTalkEndpointAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The assigned circuitless IP address of the application endpoint
|
|
which must belong to the same subnet of existing IP interface on
|
|
device. This object assignment requires rcVspTalkEndpointVrfName
|
|
and rcVspTalkEndpointMacOffset"
|
|
::= { rcVspTalkScalars 2 }
|
|
|
|
rcVspTalkEndpointVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the virtual Router which rcVspTalkEndpointAddress
|
|
belong to."
|
|
::= { rcVspTalkScalars 3 }
|
|
|
|
rcVspTalkNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable the notifcation of the register events"
|
|
DEFVAL { false }
|
|
::= { rcVspTalkScalars 4 }
|
|
|
|
-- IM/GTALK/AVAYA group table --
|
|
|
|
rcVspTalkGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVspTalkGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vsp Talk Group includes IM configuraton and users"
|
|
::= { rcVspTalkObjects 2 }
|
|
|
|
rcVspTalkGroupEntry OBJECT-TYPE
|
|
SYNTAX RcVspTalkGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry of the IM group"
|
|
INDEX { rcVspTalkGroupType }
|
|
::= { rcVspTalkGroupTable 1 }
|
|
|
|
RcVspTalkGroupEntry ::=
|
|
SEQUENCE {
|
|
rcVspTalkGroupType INTEGER,
|
|
rcVspTalkGroupServerAddress DisplayString,
|
|
rcVspTalkGroupServerPort Integer32,
|
|
rcVspTalkGroupServerOldSslTypeEnable TruthValue,
|
|
rcVspTalkGroupServerEncryption INTEGER,
|
|
rcVspTalkGroupServerProxy DisplayString,
|
|
rcVspTalkGroupClientUsername DisplayString,
|
|
rcVspTalkGroupClientPassword DisplayString,
|
|
rcVspTalkGroupClientMembers DisplayString,
|
|
rcVspTalkGroupEnable TruthValue,
|
|
rcVspTalkGroupRowStatus RowStatus
|
|
}
|
|
|
|
rcVspTalkGroupType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
yahoo(1),
|
|
gtalk(2),
|
|
avaya(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Type of vsp messaging group"
|
|
::= { rcVspTalkGroupEntry 1 }
|
|
|
|
rcVspTalkGroupServerAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Messaging server address"
|
|
::= { rcVspTalkGroupEntry 2 }
|
|
|
|
rcVspTalkGroupServerPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..49151)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The TCP port for Messaging"
|
|
::= { rcVspTalkGroupEntry 3 }
|
|
|
|
rcVspTalkGroupServerOldSslTypeEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable/disable using old style SSL interface"
|
|
DEFVAL { false }
|
|
::= { rcVspTalkGroupEntry 4}
|
|
|
|
rcVspTalkGroupServerEncryption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
asRequested(1),
|
|
required(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Encrytion option."
|
|
DEFVAL { required }
|
|
::= { rcVspTalkGroupEntry 5 }
|
|
|
|
rcVspTalkGroupServerProxy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Messaging server proxy"
|
|
::= { rcVspTalkGroupEntry 6 }
|
|
|
|
rcVspTalkGroupClientUsername OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Messaging client Username for this device"
|
|
::= { rcVspTalkGroupEntry 7 }
|
|
|
|
rcVspTalkGroupClientPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..80))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Password for rcVspTalkGroupClientUsername which is registered
|
|
in the server."
|
|
::= { rcVspTalkGroupEntry 8 }
|
|
rcVspTalkGroupClientMembers OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..1024))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "A list of members of this messaging group. There is
|
|
a max of 12 members, with names seperated by comma"
|
|
::= { rcVspTalkGroupEntry 9 }
|
|
|
|
rcVspTalkGroupEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Adminstratively Enable/disable this messaging group"
|
|
DEFVAL { false }
|
|
::= { rcVspTalkGroupEntry 10}
|
|
|
|
rcVspTalkGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcVspTalkGroupEntry 11}
|
|
|
|
-- End of VSPTalk
|
|
|
|
-- --------------------------------------------------------------
|
|
-- Vrrpv3 MIB Groups
|
|
--
|
|
|
|
rcVrrpTmpMib OBJECT IDENTIFIER ::= { rcVrrpv3 1 }
|
|
rcVrrpTmpOperations OBJECT IDENTIFIER ::= { rcVrrpTmpMib 1 }
|
|
rcVrrpTmpStatistics OBJECT IDENTIFIER ::= { rcVrrpTmpMib 2 }
|
|
|
|
--
|
|
-- Start of MIB objects
|
|
--
|
|
rcVrrpTmpNotificationCntl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the VRRP-enabled router will generate
|
|
SNMP notifications for events defined in this MIB.
|
|
'Enabled' results in SNMP notifications; 'disabled', no
|
|
notifications are sent."
|
|
DEFVAL { enabled }
|
|
::= { rcVrrpTmpOperations 2 }
|
|
|
|
--
|
|
-- Vrrp Operations Table
|
|
--
|
|
|
|
-- =begin enum
|
|
-- rcVrrpTmpOperationsAdvInterval max 40
|
|
-- =end enum
|
|
|
|
rcVrrpTmpOperationsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrrpTmpOperationsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unified Operations table for a VRRP router which
|
|
consists of a sequence (i.e., one or more conceptual
|
|
rows) of 'rcVrrpTmpOperationsEntry' items which describe
|
|
the operational characteristics of a virtual router."
|
|
::= { rcVrrpTmpOperations 7 }
|
|
|
|
rcVrrpTmpOperationsEntry OBJECT-TYPE
|
|
SYNTAX RcVrrpTmpOperationsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the rcVrrpTmpOperationsTable containing the
|
|
operational characteristics of a virtual router. On a
|
|
VRRP router, a given virtual router is identified by a
|
|
combination of the IP version, VRID and ifIndex.
|
|
ifIndex represents a physical interface of the router.
|
|
Note that rows in this table can be distinguished on a
|
|
multi-stacked device running VRRP over IPv4 and
|
|
IPv6 on the same physical interface.
|
|
Rows in the table cannot be modified unless the value
|
|
of 'rcVrrpTmpOperationsState' has transitioned to
|
|
'initialize'"
|
|
INDEX { rcVrrpTmpOperationsIfIndex,rcVrrpTmpOperationsInetAddrType,
|
|
rcVrrpTmpOperationsVrId }
|
|
::= { rcVrrpTmpOperationsTable 1 }
|
|
|
|
RcVrrpTmpOperationsEntry ::=
|
|
SEQUENCE {
|
|
rcVrrpTmpOperationsIfIndex InterfaceIndex,
|
|
rcVrrpTmpOperationsInetAddrType InetAddressType,
|
|
rcVrrpTmpOperationsVrId VrId,
|
|
rcVrrpTmpOperationsVirtualMacAddr MacAddress,
|
|
rcVrrpTmpOperationsState INTEGER,
|
|
rcVrrpTmpOperationsPriority Integer32,
|
|
rcVrrpTmpOperationsAddrCount Integer32,
|
|
rcVrrpTmpOperationsMasterIpAddr InetAddress,
|
|
rcVrrpTmpOperationsPrimaryIpAddr InetAddress,
|
|
rcVrrpTmpOperationsAdvInterval TimeInterval,
|
|
rcVrrpTmpOperationsPreemptMode TruthValue,
|
|
rcVrrpTmpOperationsAcceptMode TruthValue,
|
|
rcVrrpTmpOperationsUpTime TimeStamp,
|
|
rcVrrpTmpOperationsStorageType StorageType,
|
|
rcVrrpTmpOperationsRowStatus RowStatus
|
|
}
|
|
|
|
rcVrrpTmpOperationsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface index on which the virtual router is configured."
|
|
::= { rcVrrpTmpOperationsEntry 1 }
|
|
|
|
rcVrrpTmpOperationsInetAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address type of RcVrrpTmpOperationsEntry. This value
|
|
applies to both rcVrrpTmpOperationsMasterIpAddr and
|
|
rcVrrpTmpOperationsPrimaryIpAddr."
|
|
REFERENCE "RFC 4001"
|
|
::= { rcVrrpTmpOperationsEntry 2 }
|
|
|
|
rcVrrpTmpOperationsVrId OBJECT-TYPE
|
|
SYNTAX VrId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the Virtual Router Identifier
|
|
(VRID)."
|
|
REFERENCE "RFC 4001"
|
|
::= { rcVrrpTmpOperationsEntry 3 }
|
|
|
|
rcVrrpTmpOperationsVirtualMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The virtual MAC address of the virtual router.
|
|
Although this object can be derived from the
|
|
'rcVrrpTmpOperationsVrId' object, it is defined so that it
|
|
is easily obtainable by a management application and
|
|
can be included in VRRP-related SNMP notifications."
|
|
REFERENCE "STD 58 RFC 2578"
|
|
::= { rcVrrpTmpOperationsEntry 4 }
|
|
|
|
rcVrrpTmpOperationsState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initialize(1),
|
|
backup(2),
|
|
master(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the virtual router. This object
|
|
has three defined values:
|
|
- `initialize', which indicates that the
|
|
virtual router is waiting for a startup event.
|
|
- `backup', which indicates the virtual router is
|
|
monitoring the availability of the master router.
|
|
- `master', which indicates that the virtual router
|
|
is forwarding packets for IP addresses that are
|
|
associated with this router."
|
|
REFERENCE " RFC 3768"
|
|
::= { rcVrrpTmpOperationsEntry 5 }
|
|
|
|
rcVrrpTmpOperationsPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the priority to be used for the
|
|
virtual router master election process. Higher values
|
|
imply higher priority.
|
|
A priority of '0', although not settable, is sent by
|
|
the master router to indicate that this router has
|
|
ceased to participate in VRRP and a backup virtual
|
|
router should transition to become a new master.
|
|
A priority of 255 is used for the router that owns the
|
|
associated IP address(es) for VRRP over IPv4/IPv6 and hence
|
|
not settable.
|
|
A 'badValue(3)' should be returned when a user tries to
|
|
set 0 or 255 for this object. "
|
|
DEFVAL { 100 }
|
|
::= { rcVrrpTmpOperationsEntry 6 }
|
|
|
|
rcVrrpTmpOperationsAddrCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IP addresses that are associated with
|
|
this virtual router. This number is equal to the
|
|
number of rows in the rcVrrpTmpAssociatedAddrTable that
|
|
correspond to a given IP version/VRID/ifIndex."
|
|
REFERENCE "RFC 3768 section 5.3.5. Count IP Addrs"
|
|
::= { rcVrrpTmpOperationsEntry 7 }
|
|
|
|
rcVrrpTmpOperationsMasterIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The master router's real IP address. Master router
|
|
would set this address to rcVrrpTmpOperationsPrimaryIpAddr
|
|
while transitioning to master state. For backup
|
|
routers, this is the IP address listed as the source in
|
|
VRRP advertisement last received by this virtual
|
|
router."
|
|
REFERENCE " RFC 3768"
|
|
::= { rcVrrpTmpOperationsEntry 8 }
|
|
|
|
rcVrrpTmpOperationsPrimaryIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In the case where there are more than one IP
|
|
Address (associated IP addresses) for a given
|
|
`ifIndex', this object is used to specify the IP
|
|
address that will become the
|
|
rcVrrpTmpOperationsMasterIpAddr', should the virtual router
|
|
transition from backup state to master."
|
|
::= { rcVrrpTmpOperationsEntry 9 }
|
|
|
|
rcVrrpTmpOperationsAdvInterval OBJECT-TYPE
|
|
SYNTAX TimeInterval (1..4096)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval between sending advertisement messages.
|
|
Only the master router sends VRRP advertisements.
|
|
It is configured in seconds, but it is converted into
|
|
centiseconds that is used in the VRRP packets."
|
|
REFERENCE " RFC 3768 section 5.3.7"
|
|
DEFVAL { 100}
|
|
::= { rcVrrpTmpOperationsEntry 10 }
|
|
|
|
rcVrrpTmpOperationsPreemptMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether a higher priority virtual router will
|
|
preempt a lower priority master."
|
|
REFERENCE " RFC 3768 section 6.1"
|
|
DEFVAL { true }
|
|
::= { rcVrrpTmpOperationsEntry 11 }
|
|
|
|
rcVrrpTmpOperationsAcceptMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether a virtual router in Master state
|
|
will accept packets addressed to the address owner's
|
|
IPv6 address as its own if it is not the IPv6 address
|
|
owner. Default is False.
|
|
This object is not relevant for rows representing VRRP
|
|
over IPv4 and should be set to false."
|
|
DEFVAL { false }
|
|
::= { rcVrrpTmpOperationsEntry 12 }
|
|
|
|
rcVrrpTmpOperationsUpTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the value of the `sysUpTime' object when this
|
|
virtual router (i.e., the `rcVrrpTmpOperationsState')
|
|
transitioned out of `initialized'."
|
|
REFERENCE " RFC 3768 section 6.1"
|
|
::= { rcVrrpTmpOperationsEntry 13 }
|
|
|
|
rcVrrpTmpOperationsStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row. Write access
|
|
is not required. It is optional to support nonVolatile
|
|
StorageType enumeration."
|
|
REFERENCE " RFC4181 section 4.6.4"
|
|
DEFVAL { nonVolatile }
|
|
::= { rcVrrpTmpOperationsEntry 14 }
|
|
|
|
rcVrrpTmpOperationsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RowStatus variable should be used in accordance to
|
|
installation and removal conventions for conceptual
|
|
rows. When `rcVrrpTmpOperationsRowStatus' is set to
|
|
active(1), no other objects in the conceptual row can
|
|
be modified.
|
|
To create a row in this table, a manager sets this
|
|
object to either createAndGo(4) or createAndWait(5).
|
|
Until instances of all corresponding columns are
|
|
appropriately configured, the value of the
|
|
corresponding instance of the `rcVrrpTmpOperationsRowStatus'
|
|
column will be read as notReady(3).
|
|
In particular, a newly created row cannot be made
|
|
active(1) until (minimally) the corresponding instance
|
|
of rcVrrpTmpOperationsInetAddrType, rcVrrpTmpOperationsVrId and
|
|
rcVrrpTmpOperationsPrimaryIpAddr has been set and there is
|
|
at least one active row in the
|
|
`rcVrrpTmpAssociatedIpAddrTable' defining an associated
|
|
IP address.
|
|
notInService(2) should be used to administratively
|
|
bring the row down.
|
|
|
|
A typical order of operation to add a row is:
|
|
1. Create a row in rcVrrpTmpOperationsTable with
|
|
createAndWait(5).
|
|
2. Create one or more corresponding rows in
|
|
rcVrrpTmpAssociatedIpAddrTable.
|
|
3. Populate the rcVrrpTmpOperationsEntry.
|
|
4. set rcVrrpTmpOperationsRowStatus to active(1).
|
|
|
|
A typical order of operation to delete an entry is:
|
|
1. Set rcVrrpTmpOperationsRowStatus to notInService(2).
|
|
2. Set the corresponding rows in
|
|
rcVrrpTmpAssociatedIpAddrTable to destroy(6) to delete the
|
|
entry.
|
|
3. set rcVrrpTmpOperationsRowStatus to destroy(6) to delete
|
|
the entry."
|
|
::= { rcVrrpTmpOperationsEntry 15 }
|
|
|
|
--
|
|
-- Vrrp Associated Address Table
|
|
--
|
|
|
|
rcVrrpTmpAssociatedIpAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrrpTmpAssociatedIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of addresses associated with this virtual
|
|
router."
|
|
::= { rcVrrpTmpOperations 8 }
|
|
|
|
rcVrrpTmpAssociatedIpAddrEntry OBJECT-TYPE
|
|
SYNTAX RcVrrpTmpAssociatedIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table contains an IP address that is
|
|
associated with a virtual router. The number of rows
|
|
for a given IP version, VrID and ifIndex will equal the
|
|
number of IP addresses associated (e.g., backed up) by
|
|
the virtual router (equivalent to
|
|
'rcVrrpTmpOperationsIpAddrCount').
|
|
Rows in the table cannot be modified unless the value
|
|
of `rcVrrpTmpOperationsState' has transitioned to
|
|
`initialize'."
|
|
INDEX { rcVrrpTmpOperationsIfIndex,rcVrrpTmpOperationsInetAddrType,
|
|
rcVrrpTmpOperationsVrId,rcVrrpTmpAssociatedIpAddr, rcVrrpTmpAssociatedIpAddrPrefixLength }
|
|
::= { rcVrrpTmpAssociatedIpAddrTable 1 }
|
|
|
|
RcVrrpTmpAssociatedIpAddrEntry ::=
|
|
SEQUENCE {
|
|
rcVrrpTmpAssociatedIpAddr
|
|
InetAddress,
|
|
rcVrrpTmpAssociatedIpAddrPrefixLength
|
|
InetAddressPrefixLength,
|
|
rcVrrpTmpAssociatedStorageType
|
|
StorageType,
|
|
rcVrrpTmpAssociatedIpAddrRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
rcVrrpTmpAssociatedIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The assigned IP addresses that a virtual router is
|
|
responsible for backing up.
|
|
The size of this object is either 4 or 16 depending on
|
|
rcVrrpTmpOperationsInetAddrType."
|
|
REFERENCE "RFC 3768 Section 5.3.9"
|
|
::= { rcVrrpTmpAssociatedIpAddrEntry 1 }
|
|
|
|
rcVrrpTmpAssociatedIpAddrPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the prefix (in bits)."
|
|
::= { rcVrrpTmpAssociatedIpAddrEntry 2 }
|
|
|
|
rcVrrpTmpAssociatedStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row. Write access
|
|
is not required. It is optional to support nonVolatile
|
|
StorageType enumeration."
|
|
REFERENCE " RFC4181 section 4.6.4"
|
|
DEFVAL { nonVolatile }
|
|
::= { rcVrrpTmpAssociatedIpAddrEntry 3 }
|
|
|
|
rcVrrpTmpAssociatedIpAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RowStatus variable, used according to
|
|
installation and removal conventions for conceptual
|
|
rows. To create a row in this table, a manager sets
|
|
this object to either createAndGo(4) or
|
|
createAndWait(5). Setting this object to active(1)
|
|
results in the addition of an associated address for a
|
|
virtual router. Setting this object to notInService(2)
|
|
results in administratively bringing down the row.
|
|
Destroying the entry or setting it to destroy(6)
|
|
removes the associated address from the virtual router.
|
|
The use of other values is implementation-dependent.
|
|
Only rcVrrpTmpAssociatedStorageType can be modified when the
|
|
row is in active(1) state for Implementations
|
|
supporting write access to rcVrrpTmpAssociatedStorageType
|
|
Implementations should not allow deletion of the last
|
|
row corresponding to an active row in
|
|
rcVrrpTmpOperationsTable.
|
|
Refer to description of rcVrrpTmpOperationsRowStatus for a
|
|
typical row creation and deletion scenarios."
|
|
::= { rcVrrpTmpAssociatedIpAddrEntry 4 }
|
|
|
|
--
|
|
-- Vrrp Router Statistics
|
|
-- Global variables were used only by IPv6; they become deprecated with introduction of
|
|
-- common code for IPv4/IPv6 VRRPv3. They will be replaced by rcVrrpTmpRouterGlobalStatisticsTable
|
|
--
|
|
|
|
rcVrrpTmpRouterChecksumErrors OBJECT-TYPE
|
|
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received with an
|
|
invalid VRRP checksum value."
|
|
REFERENCE "RFC3768 Section 5.3.8"
|
|
::= { rcVrrpTmpStatistics 1 }
|
|
|
|
rcVrrpTmpRouterVersionErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received with an
|
|
unknown or unsupported version number."
|
|
REFERENCE "RFC3768 Section 5.3.1"
|
|
::= { rcVrrpTmpStatistics 2 }
|
|
|
|
rcVrrpTmpRouterVrIdErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received with an
|
|
invalid VRID for this virtual router."
|
|
REFERENCE "RFC3768 Section 5.3.3"
|
|
::= { rcVrrpTmpStatistics 3 }
|
|
|
|
--
|
|
-- Vrrp Router Statistics Table
|
|
--
|
|
|
|
rcVrrpTmpRouterStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrrpTmpRouterStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of virtual router statistics."
|
|
::= { rcVrrpTmpStatistics 5 }
|
|
|
|
rcVrrpTmpRouterStatisticsEntry OBJECT-TYPE
|
|
SYNTAX RcVrrpTmpRouterStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table, containing statistics
|
|
information about a given virtual router."
|
|
AUGMENTS { rcVrrpTmpOperationsEntry }
|
|
::= { rcVrrpTmpRouterStatisticsTable 1 }
|
|
|
|
RcVrrpTmpRouterStatisticsEntry ::=
|
|
SEQUENCE {
|
|
rcVrrpTmpStatisticsMasterTransitions Counter32,
|
|
rcVrrpTmpStatisticsRcvdAdvertisements Counter32,
|
|
rcVrrpTmpStatisticsAdvIntervalErrors Counter32,
|
|
rcVrrpTmpStatisticsIpTtlErrors Counter32,
|
|
rcVrrpTmpStatisticsRcvdPriZeroPackets Counter32,
|
|
rcVrrpTmpStatisticsSentPriZeroPackets Counter32,
|
|
rcVrrpTmpStatisticsRcvdInvalidTypePkts Counter32,
|
|
rcVrrpTmpStatisticsAddressListErrors Counter32,
|
|
rcVrrpTmpStatisticsPacketLengthErrors Counter32,
|
|
rcVrrpTmpStatisticsRcvdInvalidAuthentications Counter32,
|
|
rcVrrpTmpStatisticsDiscontinuityTime TimeStamp,
|
|
rcVrrpTmpStatisticsRefreshRate Integer32
|
|
}
|
|
|
|
rcVrrpTmpStatisticsMasterTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times that this virtual router's
|
|
state has transitioned to MASTER.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
rcVrrpTmpStatisticsDiscontinuityTime."
|
|
::= { rcVrrpTmpRouterStatisticsEntry 1 }
|
|
|
|
rcVrrpTmpStatisticsRcvdAdvertisements OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP advertisements received by
|
|
this virtual router.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
rcVrrpTmpStatisticsDiscontinuityTime."
|
|
::= { rcVrrpTmpRouterStatisticsEntry 2 }
|
|
|
|
rcVrrpTmpStatisticsAdvIntervalErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP advertisement packets
|
|
received for which the advertisement interval is
|
|
different than the one configured for the local virtual
|
|
router.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
rcVrrpTmpStatisticsDiscontinuityTime."
|
|
::= { rcVrrpTmpRouterStatisticsEntry 3 }
|
|
|
|
rcVrrpTmpStatisticsIpTtlErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received by the
|
|
Virtual router with IPv4 TTL (for VRRP over IPv4) or
|
|
IPv6 Hop Limit (for VRRP over IPv6) not equal to 255.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
rcVrrpTmpStatisticsDiscontinuityTime."
|
|
REFERENCE "RFC3768 Section 5.2.3"
|
|
::= { rcVrrpTmpRouterStatisticsEntry 4 }
|
|
|
|
rcVrrpTmpStatisticsRcvdPriZeroPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received by the
|
|
virtual router with a priority of '0'.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
rcVrrpTmpStatisticsDiscontinuityTime."
|
|
REFERENCE "RFC3768 Section 5.3.4"
|
|
::= { rcVrrpTmpRouterStatisticsEntry 5 }
|
|
|
|
rcVrrpTmpStatisticsSentPriZeroPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets sent by the virtual
|
|
router with a priority of '0'.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
rcVrrpTmpStatisticsDiscontinuityTime."
|
|
REFERENCE "RFC3768 Section 5.3.4"
|
|
::= { rcVrrpTmpRouterStatisticsEntry 6 }
|
|
|
|
rcVrrpTmpStatisticsRcvdInvalidTypePkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRRP packets received by the virtual
|
|
router with an invalid value in the 'type' field.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
rcVrrpTmpStatisticsDiscontinuityTime."
|
|
::= { rcVrrpTmpRouterStatisticsEntry 7 }
|
|
|
|
rcVrrpTmpStatisticsAddressListErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received for which the
|
|
address list does not match the locally configured list
|
|
for the virtual router.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
rcVrrpTmpStatisticsDiscontinuityTime."
|
|
::= { rcVrrpTmpRouterStatisticsEntry 8 }
|
|
|
|
rcVrrpTmpStatisticsPacketLengthErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a packet
|
|
length less than the length of the VRRP header.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
rcVrrpTmpStatisticsDiscontinuityTime."
|
|
::= { rcVrrpTmpRouterStatisticsEntry 9 }
|
|
|
|
rcVrrpTmpStatisticsRcvdInvalidAuthentications OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with an unknown
|
|
authentication type."
|
|
REFERENCE "RFC3768 Section 5.3.6"
|
|
::= { rcVrrpTmpRouterStatisticsEntry 10 }
|
|
|
|
rcVrrpTmpStatisticsDiscontinuityTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime on the most recent occasion at
|
|
which any one or more of this entry's counters suffered
|
|
a discontinuity.
|
|
If no such discontinuities have occurred since the last
|
|
re-initialization of the local management subsystem,
|
|
then this object contains a zero value."
|
|
::= { rcVrrpTmpRouterStatisticsEntry 11 }
|
|
|
|
rcVrrpTmpStatisticsRefreshRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milli-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum reasonable polling interval for this entry.
|
|
This object provides an indication of the minimum
|
|
Amount of time required to update the counters in this
|
|
entry."
|
|
::= { rcVrrpTmpRouterStatisticsEntry 12 }
|
|
|
|
--
|
|
-- Table to hold global statistics for both IP versions for VRRPv3
|
|
--
|
|
|
|
rcVrrpTmpRouterGlobalStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrrpTmpRouterGlobalStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of virtual router global statistics. It shows the global statistics, depending on IP version."
|
|
::= { rcVrrpTmpStatistics 6 }
|
|
|
|
rcVrrpTmpRouterGlobalStatisticsEntry OBJECT-TYPE
|
|
SYNTAX RcVrrpTmpRouterGlobalStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table, containing global statistics information about a given IP type."
|
|
INDEX { rcVrrpTmpRouterGlobalStatisticsInetAddrType}
|
|
::= { rcVrrpTmpRouterGlobalStatisticsTable 1 }
|
|
|
|
RcVrrpTmpRouterGlobalStatisticsEntry ::=
|
|
SEQUENCE {
|
|
rcVrrpTmpRouterGlobalStatisticsInetAddrType InetAddressType,
|
|
rcVrrpTmpRouterGlobalStatisticsChecksumErrors Counter64,
|
|
rcVrrpTmpRouterGlobalStatisticsVersionErrors Counter64,
|
|
rcVrrpTmpRouterGlobalStatisticsVrIdErrors Counter64
|
|
}
|
|
|
|
rcVrrpTmpRouterGlobalStatisticsInetAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address type of rcVrrpTmpRouterGlobalStatisticsEntry. It can be either IPv4 or IPv6"
|
|
::= { rcVrrpTmpRouterGlobalStatisticsEntry 1 }
|
|
|
|
rcVrrpTmpRouterGlobalStatisticsChecksumErrors OBJECT-TYPE
|
|
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received with an invalid VRRP checksum value."
|
|
::= { rcVrrpTmpRouterGlobalStatisticsEntry 2 }
|
|
|
|
rcVrrpTmpRouterGlobalStatisticsVersionErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received with an unknown or unsupported version number."
|
|
::= { rcVrrpTmpRouterGlobalStatisticsEntry 3 }
|
|
|
|
rcVrrpTmpRouterGlobalStatisticsVrIdErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received with an invalid VRID for this virtual router."
|
|
::= { rcVrrpTmpRouterGlobalStatisticsEntry 4 }
|
|
|
|
--
|
|
-- Notification Definitions
|
|
--
|
|
rcVrrpTmpNotifications OBJECT IDENTIFIER ::= { rcVrrpTmpMib 0 }
|
|
|
|
---
|
|
--- Objects used in the notifications
|
|
---
|
|
|
|
rcVrrpTmpNewMasterReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notmaster (0),
|
|
priority (1),
|
|
preempted (2),
|
|
masterNoResponse (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the reason for rcVrrpTmpNewMaster trap.
|
|
Used by rcVrrpTmpTrapNewMaster trap. The object can be
|
|
polled if the rcVrrpTmpNewMaster trap is lost to identify
|
|
the reason for transmission. Backup router should
|
|
return notmaster(0) when pooled. "
|
|
::= { rcVrrpTmpOperations 9 }
|
|
|
|
rcVrrpTmpTrapProtoErrReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hopLimitError (0),
|
|
versionError (1),
|
|
checksumError (2),
|
|
vridError(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the reason for protocol error trap.
|
|
Used by rcVrrpTmpTrapProtoError trap."
|
|
::= { rcVrrpTmpOperations 10 }
|
|
|
|
|
|
rcVrrpTmpTrapNewMaster NOTIFICATION-TYPE
|
|
OBJECTS { rcVrrpTmpOperationsMasterIpAddr,
|
|
rcVrrpTmpNewMasterReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The newMaster trap indicates that the sending agent
|
|
has transitioned to 'Master' state."
|
|
::= { rcVrrpTmpNotifications 1 }
|
|
|
|
rcVrrpTmpTrapProtoError NOTIFICATION-TYPE
|
|
OBJECTS { rcVrrpTmpTrapProtoErrReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error trap indicates that the sending agent has
|
|
encountered the protocol error indicated by
|
|
rcVrrpTmpTrapProtoErrorReason."
|
|
::= { rcVrrpTmpNotifications 3 }
|
|
|
|
-- -----------------------------------------------------------------
|
|
-- Vrrp
|
|
|
|
rcVrrpExtMib OBJECT IDENTIFIER ::= { rcVrrpv3 2 }
|
|
rcVrrpExtObjects OBJECT IDENTIFIER ::= { rcVrrpExtMib 1 }
|
|
rcVrrpExtNotifications OBJECT IDENTIFIER ::= { rcVrrpExtMib 2 }
|
|
rcVrrpExtOperations OBJECT IDENTIFIER ::= { rcVrrpExtMib 3 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- Scalar Objects
|
|
-- ---------------------------------------------------------------------
|
|
|
|
rcVrrpExtScalars OBJECT IDENTIFIER ::= { rcVrrpExtObjects 1 }
|
|
|
|
rcVrrpExtPingVirtualAddrEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to configure whether this device should respond to
|
|
pings directed to a virtual router's IPv6 address."
|
|
DEFVAL { true }
|
|
::= { rcVrrpExtScalars 1 }
|
|
|
|
rcVrrpExtVersionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER { version3(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version number of Vrrp is 3."
|
|
::= { rcVrrpExtScalars 2 }
|
|
|
|
rcVrrpExtTrapStateTransitionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
masterToBackup(2),
|
|
backupToMaster(3),
|
|
initializeToMaster(4),
|
|
masterToInitialize(5),
|
|
initializeToBackup(6),
|
|
backupToInitialize(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Potential types of state transitions.Used by
|
|
rcVrrpv3TrapStateTransition trap."
|
|
::= { rcVrrpExtScalars 3 }
|
|
|
|
rcVrrpExtTrapStateTransitionCause OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
higherPriorityAdvertizeReceived(2),
|
|
shutdownReceived(3),
|
|
rcVrrpAddrAndPhysicalAddrMatch(4),
|
|
masterDownInterval(5),
|
|
preempted(6),
|
|
lowerPriorityAdvertizeReceived(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Potential types of causes that will generate a
|
|
rcVrrpExtTrapStateTransition trap."
|
|
::= { rcVrrpExtScalars 4 }
|
|
|
|
rcVrrpExtOperationsVrId OBJECT-TYPE
|
|
SYNTAX VrId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the Virtual Router Identifier
|
|
(VRID).This is used in rcVrrpExtTrapStateTransition."
|
|
REFERENCE "RFC 4001"
|
|
::= { rcVrrpExtScalars 5 }
|
|
|
|
|
|
-- Trap Definitions
|
|
|
|
rcVrrpExtTrapStateTransition NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex,
|
|
rcVrrpExtTrapStateTransitionType,
|
|
rcVrrpExtTrapStateTransitionCause,
|
|
rcVrrpExtOperationsVrId,
|
|
rcVrrpTmpOperationsPrimaryIpAddr,
|
|
rcVrrpTmpOperationsMasterIpAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A rcVrrpExtTrapStateTransition trap signifies a state
|
|
transition has occurred on a particular vrrp interface.
|
|
Implementation of this trap is optional."
|
|
::= { rcVrrpExtNotifications 1 }
|
|
|
|
-- ---------------------------------------------------------------------
|
|
--
|
|
-- Vrrp Ext Operations Table
|
|
--
|
|
-- ---------------------------------------------------------------------
|
|
|
|
|
|
rcVrrpExtOperationsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcVrrpExtOperationsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unified Operations table for a VRRP router which consists of
|
|
a sequence (i.e., one or more conceptual rows) of
|
|
'rcVrrpExtOperationsEntry'and 'rcVrrpTmpOperationsEntry' items
|
|
which describe the operational characteristics of a virtual
|
|
router.
|
|
This table is an extention of 'rcVrrpTmpOperationsTable'.It
|
|
contains the mib objects that are Nortel specific."
|
|
::= { rcVrrpExtOperations 11 }
|
|
|
|
rcVrrpExtOperationsEntry OBJECT-TYPE
|
|
SYNTAX RcVrrpExtOperationsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the rcVrrpExtOperationsTable containing the
|
|
operational characteristics of a virtual router. On a
|
|
VRRP router, a given virtual router is identified by a
|
|
combination of the IP version, VRID and ifIndex.
|
|
ifIndex represents a physical interface of the router.
|
|
Note that rows in this table can be distinguished on a
|
|
multi-stacked device running VRRP over IPv4 and
|
|
IPv6 on the same physical interface.
|
|
Rows in the table cannot be modified unless the value
|
|
of 'rcVrrpTmpOperationsState' has transitioned to
|
|
'initialize'."
|
|
AUGMENTS { rcVrrpTmpOperationsEntry }
|
|
::= { rcVrrpExtOperationsTable 1 }
|
|
|
|
RcVrrpExtOperationsEntry ::=
|
|
SEQUENCE {
|
|
rcVrrpExtOperationsAction INTEGER,
|
|
rcVrrpExtOperationsBackUpMaster INTEGER,
|
|
rcVrrpExtOperationsBackUpMasterState INTEGER,
|
|
rcVrrpExtOperationsCriticalIpAddr InetAddress,
|
|
rcVrrpExtOperationsCriticalIpAddrEnabled TruthValue,
|
|
rcVrrpExtOperationsControl INTEGER,
|
|
rcVrrpExtOperationsHoldDownTimer Integer32,
|
|
rcVrrpExtOperationsHoldDownState INTEGER,
|
|
rcVrrpExtOperationsHoldDownTimeRemaining Integer32,
|
|
rcVrrpExtOperationsFasterAdvInterval Integer32,
|
|
rcVrrpExtOperationsFasterAdvIntervalEnabled TruthValue,
|
|
rcVrrpExtOperationsLinkLocalAddr InetAddress,
|
|
rcVrrpExtOperationsGlobalIpAddr InetAddress,
|
|
rcVrrpExtOperationsMasterAdvInterval TimeInterval
|
|
}
|
|
|
|
rcVrrpExtOperationsAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
preemptHoldDownTimer(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to trigger an action on this vrrp interface."
|
|
::= { rcVrrpExtOperationsEntry 1 }
|
|
|
|
rcVrrpExtOperationsBackUpMaster OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the backup VRRP switch traffic forwarding.
|
|
This will reduce the traffic in IST link in the
|
|
time of SMLT."
|
|
DEFVAL { disabled }
|
|
::= { rcVrrpExtOperationsEntry 2 }
|
|
|
|
rcVrrpExtOperationsBackUpMasterState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate whether backup VRRP switch traffic
|
|
forwarding is enabled or not."
|
|
DEFVAL { down }
|
|
::= { rcVrrpExtOperationsEntry 3 }
|
|
|
|
rcVrrpExtOperationsCriticalIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the interface that will cause a
|
|
shutdown event.Only IPv6 address is supported as of now."
|
|
::= { rcVrrpExtOperationsEntry 4 }
|
|
|
|
rcVrrpExtOperationsCriticalIpAddrEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate if an user-defined critical IP address should be
|
|
enabled. 'NO' = use the default IP address (::).
|
|
No effect if an user-defined IP address does not exist."
|
|
DEFVAL { false }
|
|
::= { rcVrrpExtOperationsEntry 5 }
|
|
|
|
rcVrrpExtOperationsControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will enable/disable the virtual router
|
|
function. Setting the value to 'enabled', will transition
|
|
the state of the router from 'initialize to 'backup';
|
|
Setting the value to 'disabled', will tranisition the
|
|
router from 'master' or 'backup' to 'initialize'."
|
|
DEFVAL { enabled }
|
|
::= { rcVrrpExtOperationsEntry 6 }
|
|
|
|
rcVrrpExtOperationsHoldDownTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..21600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to configure the amount of time (in seconds)
|
|
to wait before preempting the current vrrp master."
|
|
DEFVAL { 0 }
|
|
::= { rcVrrpExtOperationsEntry 7 }
|
|
|
|
rcVrrpExtOperationsHoldDownState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dormant(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to indicate the hold-down state of this vrrp
|
|
interface. If the hold-down timer is operational
|
|
this variable will be set to 'active'. 'dormant'
|
|
otherwise."
|
|
::= { rcVrrpExtOperationsEntry 8 }
|
|
|
|
rcVrrpExtOperationsHoldDownTimeRemaining OBJECT-TYPE
|
|
SYNTAX Integer32 (0..21600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to indicate the amount of time (in seconds) left
|
|
before the rcVrrpExtOperationsHoldDownTimer will expire."
|
|
::= { rcVrrpExtOperationsEntry 9 }
|
|
|
|
rcVrrpExtOperationsFasterAdvInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (200..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the faster advertisement interval, in milliseconds,
|
|
between sending advertisement messages. When the faster
|
|
advertisement interval enable is checked, the faster
|
|
advertisement interval is being used instead of the regular
|
|
advertisement interval."
|
|
DEFVAL { 200 }
|
|
::= { rcVrrpExtOperationsEntry 10 }
|
|
|
|
rcVrrpExtOperationsFasterAdvIntervalEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to indicate if the Faster Advertisement Interval
|
|
should be used.'Disable' means use regular Advertisement
|
|
interval."
|
|
DEFVAL { false }
|
|
::= { rcVrrpExtOperationsEntry 11 }
|
|
|
|
rcVrrpExtOperationsLinkLocalAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The assigned virtual address of the router. For IPv6 it is the
|
|
Linklocal addresses to the virtual router interface.
|
|
For Ipv4 it is the IP address of the virtual interface."
|
|
::= { rcVrrpExtOperationsEntry 12 }
|
|
|
|
rcVrrpExtOperationsGlobalIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The assigned Global addresses to the virtual router
|
|
interface. This mib object support only IPv6 address
|
|
as of now. This object is not used anymore since we can
|
|
have multiple global IPv6 IPs for an interface.
|
|
rcVrrpTmpAssociatedIpAddrTable is used to store the global
|
|
addresses."
|
|
::= { rcVrrpExtOperationsEntry 13 }
|
|
|
|
rcVrrpExtOperationsMasterAdvInterval OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Advertisement Interval contained in advertisements
|
|
received from the Master. This value is saved by virtual
|
|
routers in the Backup state and is used to compute Skew_time
|
|
and Master_Down_Interval. The initial value is the same as
|
|
Advertisement_Interval. It is measured in milliseconds."
|
|
REFERENCE "RFC 5798 section 6.1"
|
|
::= { rcVrrpExtOperationsEntry 14 }
|
|
|
|
-- IS-IS
|
|
|
|
rcIsisGlobalGroup OBJECT IDENTIFIER ::= { rcIsis 1 }
|
|
|
|
rcIsisGlobalAreaAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
simple(1),
|
|
hmac-md5(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The authentication type for the area"
|
|
DEFVAL { none }
|
|
::= { rcIsisGlobalGroup 1 }
|
|
|
|
rcIsisGlobalAreaKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key-id for the area. This is
|
|
required if the auth-type is hmac-md5 else it is
|
|
not required."
|
|
::= { rcIsisGlobalGroup 2 }
|
|
|
|
rcIsisGlobalAreaAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key, this key will be used to
|
|
authenticate the LSP's received on the area"
|
|
::= { rcIsisGlobalGroup 3 }
|
|
|
|
rcIsisGlobalDomainAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
simple(1),
|
|
hmac-md5(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The authentication type for the domain"
|
|
DEFVAL { none }
|
|
::= { rcIsisGlobalGroup 4 }
|
|
|
|
rcIsisGlobalDomainKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The authentication key-id for the domain. This is
|
|
required if the auth-type is hmac-md5 else it is
|
|
not required."
|
|
::= { rcIsisGlobalGroup 5 }
|
|
|
|
rcIsisGlobalDomainAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key, this key will be used to
|
|
authenticate the LSP's received on the domain"
|
|
::= { rcIsisGlobalGroup 6 }
|
|
|
|
rcIsisGlobalCsnpInt OBJECT-TYPE
|
|
SYNTAX Integer32 (1..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Interval of time, in seconds, between periodic
|
|
transmission of a complete set of CSNPs on
|
|
multiaccess networks if this router is the
|
|
designated router at this level.
|
|
This object follows the resettingTimer behavior.
|
|
For ResettingTimer description see the ISIS MIB"
|
|
DEFVAL { 10 }
|
|
::= { rcIsisGlobalGroup 7 }
|
|
|
|
rcIsisGlobalRxmtLspInt OBJECT-TYPE
|
|
SYNTAX Integer32 (1..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Minimum interval, in seconds, between
|
|
re-transmission of a LSP at this level. This
|
|
object follows the resettingTimer behavior.
|
|
For ResettingTimer description see the ISIS MIB"
|
|
DEFVAL { 5 }
|
|
::= { rcIsisGlobalGroup 8 }
|
|
|
|
rcIsisGlobalPSNPInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Minimum interval in seconds between sending Partial
|
|
Sequence Number PDUs at this level. This object
|
|
follows the resettingTimer behavior.
|
|
For ResettingTimer description see the ISIS MIB"
|
|
DEFVAL { 2 }
|
|
::= { rcIsisGlobalGroup 9 }
|
|
|
|
rcIsisGlobalHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hostname listed in LSP, or the system name if host
|
|
name is not configured."
|
|
::= { rcIsisGlobalGroup 10 }
|
|
|
|
rcIsisGlobalSpfDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ISIS SPF delay in miliseconds"
|
|
DEFVAL { 100 }
|
|
::= { rcIsisGlobalGroup 11 }
|
|
|
|
rcIsisGlobalControlVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ISIS control vlan ID"
|
|
::= { rcIsisGlobalGroup 12 }
|
|
|
|
rcIsisGlobalIpSourceAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB IP address. Define an existing router interface
|
|
for management (ping/traceroute)"
|
|
::= { rcIsisGlobalGroup 13 }
|
|
|
|
rcIsisGlobalIpSourceAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of address for existing router interface
|
|
for management (ping/traceroute)"
|
|
::= { rcIsisGlobalGroup 14 }
|
|
|
|
rcIsisGlobalIpv6SourceAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB IPv6 address. Define an existing router interface
|
|
for management (ping/traceroute)"
|
|
::= { rcIsisGlobalGroup 15 }
|
|
|
|
rcIsisGlobalIpv6SourceAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of address for existing router interface
|
|
for management (ping/traceroute)"
|
|
::= { rcIsisGlobalGroup 16 }
|
|
|
|
rcIsisGlobalIpTunnelSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ISIS IP tunnel source address"
|
|
::= { rcIsisGlobalGroup 17 }
|
|
|
|
rcIsisGlobalIpTunnelPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port associated with the IP tunnel"
|
|
::= { rcIsisGlobalGroup 18 }
|
|
|
|
rcIsisGlobalIpTunnelVrf OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "VRF name associated with the IP tunnel"
|
|
::= { rcIsisGlobalGroup 19 }
|
|
|
|
rcIsisGlobalIpTunnelMtu OBJECT-TYPE
|
|
SYNTAX Unsigned32 (750..1950)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The value specifies the logical tunnel MTU"
|
|
::= { rcIsisGlobalGroup 20 }
|
|
|
|
rcIsisGlobalMgmtIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Inband management IPv4 address and can
|
|
be used by both DVR and non DVR enabled nodes."
|
|
::= { rcIsisGlobalGroup 21 }
|
|
|
|
rcIsisGlobalBackboneEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allow a non DVR BEB to join the DVR backbone tree
|
|
in order to receive redistributed DVR Host Routes
|
|
from all the different DVR Controllers in the SPB Network."
|
|
DEFVAL { false }
|
|
::= { rcIsisGlobalGroup 22 }
|
|
|
|
-- BEGIN rcIsisCircuitTable --
|
|
|
|
rcIsisCircuitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisCircuitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS Circuit, this is extension
|
|
to the isisCircTable defined in ISIS MIB"
|
|
::= { rcIsis 2 }
|
|
|
|
rcIsisCircuitEntry OBJECT-TYPE
|
|
SYNTAX RcIsisCircuitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisCircuit Table. A Entry in
|
|
table exists for each ISIS circuit created"
|
|
INDEX { rcIsisCircuitIndex }
|
|
::= { rcIsisCircuitTable 1 }
|
|
|
|
RcIsisCircuitEntry ::=
|
|
SEQUENCE {
|
|
rcIsisCircuitIndex Integer32,
|
|
rcIsisCircuitType INTEGER,
|
|
rcIsisCircuitAuthType INTEGER,
|
|
rcIsisCircuitKeyId INTEGER,
|
|
rcIsisCircuitAuthKey OCTET STRING,
|
|
rcIsisCircuitAddr IpAddress,
|
|
rcIsisCircuitMask IpAddress,
|
|
rcIsisCircuitOperState INTEGER,
|
|
rcIsisCircuitNumAdj Integer32,
|
|
rcIsisCircuitNumUpAdj Integer32
|
|
}
|
|
|
|
rcIsisCircuitIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The identifier of this circuit, unique within the
|
|
Intermediate System. This object follows
|
|
the index behavior. This is for SNMP Indexing
|
|
purposes only and need not have any relation to
|
|
any protocol value."
|
|
::= { rcIsisCircuitEntry 1 }
|
|
|
|
rcIsisCircuitType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bcast(1),
|
|
ptpt(2),
|
|
passive(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "ISIS circuit type this is an extention to
|
|
ISIS circuit table, this was required a
|
|
standard MIB circuit type does not support
|
|
passive type"
|
|
DEFVAL { bcast }
|
|
::= { rcIsisCircuitEntry 2 }
|
|
|
|
rcIsisCircuitAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
simple(1),
|
|
hmac-md5(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication type for IIH to be sent/reveived
|
|
on the circuit/interface"
|
|
DEFVAL { none }
|
|
::= { rcIsisCircuitEntry 3 }
|
|
|
|
rcIsisCircuitKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key id related to IIH key
|
|
This can be set only if the auth-type is hmac-md5"
|
|
::= { rcIsisCircuitEntry 4 }
|
|
|
|
rcIsisCircuitAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Authentication key to be used to authenticate
|
|
IIH sent/reveived on the circuit/interface"
|
|
::= { rcIsisCircuitEntry 5 }
|
|
|
|
rcIsisCircuitAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address associated with the interface"
|
|
::= { rcIsisCircuitEntry 6 }
|
|
|
|
rcIsisCircuitMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP mask associated with the interface"
|
|
::= { rcIsisCircuitEntry 7 }
|
|
|
|
rcIsisCircuitOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This variable tells the operating state of circ"
|
|
::= { rcIsisCircuitEntry 8 }
|
|
|
|
rcIsisCircuitNumAdj OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of adjacencies"
|
|
::= { rcIsisCircuitEntry 9 }
|
|
|
|
rcIsisCircuitNumUpAdj OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of adjancencies which are UP"
|
|
::= { rcIsisCircuitEntry 10 }
|
|
|
|
rcIsisStats OBJECT IDENTIFIER ::= { rcIsis 3 }
|
|
|
|
rcIsisStatsClearErrorCounters OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear ISIS global and interface error counters."
|
|
DEFVAL { false }
|
|
::= { rcIsisStats 1 }
|
|
|
|
rcIsisStatsClearPacketCounters OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear IS-IS control packets sent and received
|
|
at each level on all the interface/circuits."
|
|
DEFVAL { false }
|
|
::= { rcIsisStats 2 }
|
|
|
|
|
|
-- BEGIN rcIsisPlsbTable --
|
|
|
|
rcIsisPlsbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of PLSB under IS-IS"
|
|
::= { rcIsis 4}
|
|
|
|
rcIsisPlsbEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisPlsb Table. A Entry in
|
|
table exists for each plsb instance created"
|
|
INDEX { rcIsisPlsbId }
|
|
::= { rcIsisPlsbTable 1 }
|
|
|
|
RcIsisPlsbEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbId Integer32,
|
|
rcIsisPlsbRowStatus RowStatus,
|
|
rcIsisPlsbNodeNickName IsisPlsbNodeNickName,
|
|
rcIsisPlsbVlans OCTET STRING,
|
|
rcIsisPlsbLsdbTrap EnableValue,
|
|
rcIsisPlsbState EnableValue,
|
|
rcIsisPlsbIpShortcut EnableValue,
|
|
rcIsisPlsbPrimaryVlan Integer32,
|
|
rcIsisPlsbSmltSplitBEB INTEGER,
|
|
rcIsisPlsbSmltBmac MacAddress,
|
|
rcIsisPlsbSmltPeerSysId IsisSystemID,
|
|
rcIsisPlsbMcast EnableValue,
|
|
rcIsisPlsbMcastFwdCacheTimeout Integer32,
|
|
rcIsisPlsbIpv6Shortcut EnableValue,
|
|
rcIsisPlsbMcastSpbPimGwControllerEnable TruthValue,
|
|
rcIsisPlsbMcastSpbPimGwGatewayEnable TruthValue
|
|
}
|
|
|
|
rcIsisPlsbId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PLSB instance ID"
|
|
::= { rcIsisPlsbEntry 1 }
|
|
|
|
rcIsisPlsbRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the rcIsisPlsbEntry. "
|
|
::= { rcIsisPlsbEntry 2 }
|
|
|
|
rcIsisPlsbNodeNickName OBJECT-TYPE
|
|
SYNTAX IsisPlsbNodeNickName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PLSB node's nickname is used to
|
|
calculate ISID multicast mac address."
|
|
::= { rcIsisPlsbEntry 3 }
|
|
|
|
rcIsisPlsbVlans OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(512))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PLSB ISIS vlans for a PLSB instance."
|
|
::= { rcIsisPlsbEntry 4 }
|
|
|
|
rcIsisPlsbLsdbTrap OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "isis PLSB lsdb update trap enable on this plsb instance"
|
|
DEFVAL { disable }
|
|
::= { rcIsisPlsbEntry 5 }
|
|
|
|
rcIsisPlsbState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "enable/disable PLSB."
|
|
::= { rcIsisPlsbEntry 6 }
|
|
|
|
rcIsisPlsbIpShortcut OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB IP shortcut enabled"
|
|
DEFVAL { disable }
|
|
::= { rcIsisPlsbEntry 7 }
|
|
|
|
rcIsisPlsbPrimaryVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Primary Vlan Id for this plsb instance."
|
|
::= { rcIsisPlsbEntry 8 }
|
|
|
|
rcIsisPlsbSmltSplitBEB OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB SMLT split BEB for this plsb instance."
|
|
DEFVAL { primary }
|
|
::= { rcIsisPlsbEntry 9 }
|
|
|
|
rcIsisPlsbSmltBmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB SMLT virtual MAC for this plsb instance."
|
|
::= { rcIsisPlsbEntry 10 }
|
|
|
|
rcIsisPlsbSmltPeerSysId OBJECT-TYPE
|
|
SYNTAX IsisSystemID
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB SMLT Peer's system-id for this plsb instance."
|
|
::= { rcIsisPlsbEntry 11 }
|
|
|
|
rcIsisPlsbMcast OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB Multicast enable"
|
|
DEFVAL { disable }
|
|
::= { rcIsisPlsbEntry 12 }
|
|
|
|
rcIsisPlsbMcastFwdCacheTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (10..86400)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Multicast Fwd Cache Timeout in seconds"
|
|
DEFVAL { 210 }
|
|
::= { rcIsisPlsbEntry 13 }
|
|
|
|
rcIsisPlsbIpv6Shortcut OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB IPv6 shortcut enabled"
|
|
DEFVAL { disable }
|
|
::= { rcIsisPlsbEntry 14 }
|
|
|
|
rcIsisPlsbMcastSpbPimGwControllerEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB Multicast SPB PIM Gateway controller
|
|
enable/disable."
|
|
DEFVAL { false }
|
|
::= { rcIsisPlsbEntry 15 }
|
|
|
|
rcIsisPlsbMcastSpbPimGwGatewayEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "ISIS PLSB Multicast SPB PIM Gateway enable/disable."
|
|
DEFVAL { false }
|
|
::= { rcIsisPlsbEntry 16 }
|
|
|
|
-- BEGIN rcIsisCircuitPlsbTable --
|
|
|
|
IsisDefaultL1Metric ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for default metric for single hop.
|
|
ISO 10589 provides for 4 types of metric. Only the
|
|
'default' metric is used in practice."
|
|
SYNTAX Integer32 (1..63)
|
|
|
|
IsisWideL1Metric ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wide Metric for IS Neighbors. ISO 10589 provides a
|
|
6 bit metric. Traffic Engineering extensions provide
|
|
24 bit metrics."
|
|
SYNTAX Integer32 (1..16777215)
|
|
|
|
rcIsisCircuitPlsbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisCircuitPlsbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS Circuit PLSB instance"
|
|
::= { rcIsis 5 }
|
|
|
|
rcIsisCircuitPlsbEntry OBJECT-TYPE
|
|
SYNTAX RcIsisCircuitPlsbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisCircuitPlsb Table. A Entry in
|
|
table exists for each PLSB instance under a ISIS
|
|
circuit created"
|
|
INDEX { rcIsisCircuitPlsbIndex,
|
|
rcIsisCircuitPlsbId}
|
|
::= { rcIsisCircuitPlsbTable 1 }
|
|
|
|
RcIsisCircuitPlsbEntry ::=
|
|
SEQUENCE {
|
|
rcIsisCircuitPlsbIndex InterfaceIndexOrZero,
|
|
rcIsisCircuitPlsbId Integer32,
|
|
rcIsisCircuitPlsbRowStatus RowStatus,
|
|
rcIsisCircuitPlsbState EnableValue,
|
|
rcIsisCircuitPlsbType INTEGER,
|
|
rcIsisCircuitPlsbL1Metric IsisDefaultL1Metric,
|
|
rcIsisCircuitPlsbWideL1Metric IsisWideL1Metric
|
|
}
|
|
|
|
rcIsisCircuitPlsbIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The identifier of this circuit, unique within the
|
|
Intermediate System. This object follows
|
|
the index behavior. This is for SNMP Indexing
|
|
purposes only and need not have any relation to
|
|
any protocol value."
|
|
::= { rcIsisCircuitPlsbEntry 1 }
|
|
|
|
rcIsisCircuitPlsbId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PLSB instance ID"
|
|
::= { rcIsisCircuitPlsbEntry 2 }
|
|
|
|
rcIsisCircuitPlsbRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the rcIsisCircuitPlsbEntry. "
|
|
::= { rcIsisCircuitPlsbEntry 3 }
|
|
|
|
rcIsisCircuitPlsbState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PLSB functionality enable on this Plsb
|
|
instance at this port"
|
|
DEFVAL { disable }
|
|
::= { rcIsisCircuitPlsbEntry 4 }
|
|
|
|
rcIsisCircuitPlsbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bcast(1),
|
|
ptpt(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "ISIS circuit type this is an extention to
|
|
ISIS circuit table, this was required a
|
|
standard MIB circuit type does not support
|
|
passive type"
|
|
DEFVAL { ptpt }
|
|
::= { rcIsisCircuitPlsbEntry 5 }
|
|
|
|
rcIsisCircuitPlsbL1Metric OBJECT-TYPE
|
|
SYNTAX IsisDefaultL1Metric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value of this circuit for this level."
|
|
DEFVAL { 10 }
|
|
::= { rcIsisCircuitPlsbEntry 6 }
|
|
|
|
rcIsisCircuitPlsbWideL1Metric OBJECT-TYPE
|
|
SYNTAX IsisWideL1Metric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value of this circuit for this level."
|
|
DEFVAL { 10 }
|
|
::= { rcIsisCircuitPlsbEntry 7 }
|
|
|
|
-- ISIS PLSB Unicast FIB Table
|
|
|
|
rcIsisPlsbUnicastFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbUnicastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Table of IS-IS PLSB Unicast FIB"
|
|
::= { rcIsis 6 }
|
|
|
|
rcIsisPlsbUnicastFibEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbUnicastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry of rcIsisPlsbUnicastFib Table. A Entry in
|
|
table exists for each PLSB unicast forwarding entry
|
|
generated by ISIS SPF computation"
|
|
INDEX { rcIsisPlsbUnicastFibDestinationMacAddr,
|
|
rcIsisPlsbUnicastFibVlan,
|
|
rcIsisPlsbUnicastFibSysId}
|
|
|
|
::= { rcIsisPlsbUnicastFibTable 1 }
|
|
|
|
RcIsisPlsbUnicastFibEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbUnicastFibDestinationMacAddr MacAddress,
|
|
rcIsisPlsbUnicastFibVlan Integer32,
|
|
rcIsisPlsbUnicastFibSysId OCTET STRING,
|
|
rcIsisPlsbUnicastFibOutgoingPort InterfaceIndex
|
|
}
|
|
|
|
rcIsisPlsbUnicastFibDestinationMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Destination Mac Address of the unicast FIB entry "
|
|
::= { rcIsisPlsbUnicastFibEntry 1 }
|
|
|
|
rcIsisPlsbUnicastFibVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Vlan of the unicast FIB entry"
|
|
::= { rcIsisPlsbUnicastFibEntry 2 }
|
|
|
|
rcIsisPlsbUnicastFibSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "System ID of the node where unicast FIB entry
|
|
come from"
|
|
::= { rcIsisPlsbUnicastFibEntry 3 }
|
|
|
|
rcIsisPlsbUnicastFibOutgoingPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Outgoing port of the unicast Fib entry."
|
|
::= { rcIsisPlsbUnicastFibEntry 4 }
|
|
|
|
-- ISIS PLSB Multicast FIB Table
|
|
|
|
rcIsisPlsbMulticastFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbMulticastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Table of IS-IS PLSB Multicast FIB"
|
|
::= { rcIsis 7 }
|
|
|
|
rcIsisPlsbMulticastFibEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbMulticastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry of rcIsisPlsbmulticastFib Table. A Entry in
|
|
table exists for each PLSB Multicast forwarding entry
|
|
generated by ISIS SPF computation"
|
|
INDEX { rcIsisPlsbMulticastFibMcastDestMacAddr,
|
|
rcIsisPlsbMulticastFibVlan,
|
|
rcIsisPlsbMulticastFibSysId }
|
|
::= { rcIsisPlsbMulticastFibTable 1 }
|
|
|
|
RcIsisPlsbMulticastFibEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbMulticastFibMcastDestMacAddr MacAddress,
|
|
rcIsisPlsbMulticastFibVlan Integer32,
|
|
rcIsisPlsbMulticastFibSysId OCTET STRING,
|
|
rcIsisPlsbMulticastFibIsid Integer32,
|
|
rcIsisPlsbMulticastFibOutgoingPorts DisplayString
|
|
}
|
|
|
|
rcIsisPlsbMulticastFibMcastDestMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Multicast destination Mac Address of the
|
|
multicast FIB entry "
|
|
::= { rcIsisPlsbMulticastFibEntry 1 }
|
|
|
|
rcIsisPlsbMulticastFibVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Vlan of the multicast FIB entry"
|
|
::= { rcIsisPlsbMulticastFibEntry 2 }
|
|
|
|
rcIsisPlsbMulticastFibSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "System ID of the node where multicast FIB entry
|
|
come from"
|
|
::= { rcIsisPlsbMulticastFibEntry 3 }
|
|
|
|
rcIsisPlsbMulticastFibIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Isid id of the multicast FIB entry"
|
|
::= { rcIsisPlsbMulticastFibEntry 4 }
|
|
|
|
rcIsisPlsbMulticastFibOutgoingPorts OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Nni port of the multicast Fib entry."
|
|
::= { rcIsisPlsbMulticastFibEntry 5 }
|
|
|
|
-- ISIS PLSB ISID Table
|
|
|
|
rcIsisPlsbIsidTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Table of IS-IS PLSB ISID"
|
|
::= { rcIsis 8 }
|
|
|
|
rcIsisPlsbIsidEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry of rcIsisPlsbIsid Table. A Entry in
|
|
table exists for each PLSB i-sid configed or discovered
|
|
by IS-IS "
|
|
INDEX { rcIsisPlsbIsidSourceName,
|
|
rcIsisPlsbIsidId,
|
|
rcIsisPlsbIsidSysId}
|
|
::= { rcIsisPlsbIsidTable 1 }
|
|
|
|
RcIsisPlsbIsidEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbIsidSourceName Integer32,
|
|
rcIsisPlsbIsidId Integer32,
|
|
rcIsisPlsbIsidSysId OCTET STRING,
|
|
rcIsisPlsbIsidType INTEGER
|
|
}
|
|
|
|
rcIsisPlsbIsidSourceName OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "nick name of node where this i-sid got
|
|
configed or discovered"
|
|
::= { rcIsisPlsbIsidEntry 1 }
|
|
|
|
rcIsisPlsbIsidId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "IS-IS PLSB Isid id"
|
|
::= { rcIsisPlsbIsidEntry 2 }
|
|
|
|
rcIsisPlsbIsidSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "System ID of the node where multicast FIB entry
|
|
come from"
|
|
::= { rcIsisPlsbIsidEntry 3 }
|
|
|
|
rcIsisPlsbIsidType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(1),
|
|
discover(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "PLSB i-sid type"
|
|
::= { rcIsisPlsbIsidEntry 4 }
|
|
|
|
rcIsisTrap OBJECT IDENTIFIER ::= { rcIsis 9 }
|
|
|
|
IsisPlsbBvid ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS B-VLAN ID."
|
|
SYNTAX Integer32 (0..4096)
|
|
|
|
IsisPlsbBvidTieBrkAlg ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS B-VLAN tie breaking algorithm."
|
|
SYNTAX INTEGER{
|
|
low-pathid(1),
|
|
high-pathid(2)
|
|
}
|
|
|
|
rcIsisLocalLspId OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 8 byte Local LSP ID, consisting of the SystemID,
|
|
Circuit ID, and Fragment Number."
|
|
::= { rcIsisTrap 1 }
|
|
|
|
rcIsisLocall1Metric OBJECT-TYPE
|
|
SYNTAX IsisDefaultL1Metric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"l1-metric for ISIS interface on local Node."
|
|
::= { rcIsisTrap 2 }
|
|
|
|
rcIsisNgbLspId OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 8 byte neighbor LSP ID, consisting of the SystemID,
|
|
Circuit ID, and Fragment Number."
|
|
::= { rcIsisTrap 3 }
|
|
|
|
rcIsisNgbl1Metric OBJECT-TYPE
|
|
SYNTAX IsisDefaultL1Metric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"l1-metric for ISIS interface on neighbor Node."
|
|
::= { rcIsisTrap 4 }
|
|
|
|
rcIsisPlsbTrapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
metricMismatch(1),
|
|
duplicateSysid(2),
|
|
lsdbUpdate(3),
|
|
duplicateNickname(4),
|
|
bvidMismatch(5),
|
|
smltVirtBmacMismatch(6),
|
|
smltPeerBmacMismatch(7),
|
|
adjState(8),
|
|
smltSplitBebMismatch(9),
|
|
multiLinkAdj(10),
|
|
smltVirtBmacMisconfigSysid(11),
|
|
smltVirtBmacMisconfigMac(12),
|
|
globalDuplicateSystemId(13),
|
|
localDuplicateNickname(14),
|
|
globalDuplicateNickname(15)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= {rcIsisTrap 5}
|
|
|
|
rcIsisLocalSysId OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (14))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS local node system-id."
|
|
::= { rcIsisTrap 6 }
|
|
|
|
rcIsisLocalInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS local interface index."
|
|
::= { rcIsisTrap 7 }
|
|
|
|
rcIsisTrapIndicator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
alarm(1),
|
|
clear(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "indicates that an alarm has been
|
|
Raised, or an alarm has been cleared."
|
|
::= { rcIsisTrap 8 }
|
|
|
|
rcIsisLocalNickname OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (7))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS local node nick-name."
|
|
::= { rcIsisTrap 9 }
|
|
|
|
rcIsisNgbNickname OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (7))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS neighbor node nick-name."
|
|
::= { rcIsisTrap 10 }
|
|
|
|
rcIsisNgbSysId OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (14))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS neighbor node system-id."
|
|
::= { rcIsisTrap 11 }
|
|
|
|
rcIsisLocalPrimaryBvid OBJECT-TYPE
|
|
SYNTAX IsisPlsbBvid
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS local primary B-VID."
|
|
::= { rcIsisTrap 12 }
|
|
|
|
rcIsisLocalPrimaryTieBrkAlg OBJECT-TYPE
|
|
SYNTAX IsisPlsbBvidTieBrkAlg
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tie breaking algorithm applied to local primary B-VID."
|
|
::= { rcIsisTrap 13 }
|
|
|
|
rcIsisLocalSecondaryBvid OBJECT-TYPE
|
|
SYNTAX IsisPlsbBvid
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS local secondary B-VID."
|
|
::= { rcIsisTrap 14 }
|
|
|
|
rcIsisLocalSecondaryTieBrkAlg OBJECT-TYPE
|
|
SYNTAX IsisPlsbBvidTieBrkAlg
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tie breaking algorithm applied to local seconday B-VID."
|
|
::= { rcIsisTrap 15 }
|
|
|
|
rcIsisNgbPrimaryBvid OBJECT-TYPE
|
|
SYNTAX IsisPlsbBvid
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS neighbor primary B-VID."
|
|
::= { rcIsisTrap 16 }
|
|
|
|
rcIsisNgbPrimaryTieBrkAlg OBJECT-TYPE
|
|
SYNTAX IsisPlsbBvidTieBrkAlg
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The neighbor tie breaking algorithm applied to primary B-VID."
|
|
::= { rcIsisTrap 17 }
|
|
|
|
rcIsisNgbSecondaryBvid OBJECT-TYPE
|
|
SYNTAX IsisPlsbBvid
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS neighbor secondary B-VID."
|
|
::= { rcIsisTrap 18 }
|
|
|
|
rcIsisNgbSecondaryTieBrkAlg OBJECT-TYPE
|
|
SYNTAX IsisPlsbBvidTieBrkAlg
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The neighbor tie breaking algorithm applied to secondary B-VID."
|
|
::= { rcIsisTrap 19 }
|
|
|
|
rcIsisLocalVirtualBmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMLT Virtual BMAC configured in the local IST switch."
|
|
::= { rcIsisTrap 20 }
|
|
|
|
|
|
rcIsisPeerVirtualBmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMLT Virtual BMAC configured in the IST Peer."
|
|
::= { rcIsisTrap 21 }
|
|
|
|
rcIsisSysId OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (14))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The isis system id configured in the local switch or IST peer."
|
|
::= { rcIsisTrap 22 }
|
|
|
|
rcIsisSmltPeerSysId OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (14))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMLT Peer system-id configured in the local switch or IST Peer."
|
|
::= { rcIsisTrap 23 }
|
|
|
|
rcIsisAdjState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
init(2),
|
|
up(3),
|
|
down(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "indicate different ISIS adjacency states."
|
|
::= { rcIsisTrap 24 }
|
|
|
|
rcIsisDuplicateNnameCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "indicate how many nodes in the network share the nick-name."
|
|
::= { rcIsisTrap 25 }
|
|
|
|
rcIsisLocalBvidCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "indicate how many b-vid configured on local nodes."
|
|
::= { rcIsisTrap 26 }
|
|
|
|
rcIsisNgbBvidCounter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "indicate how many b-vid configured on a neighbor nodes."
|
|
::= { rcIsisTrap 27 }
|
|
|
|
rcIsisLocalSmltSplitBeb OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMLT Split-BEB configured in the local IST switch."
|
|
::= { rcIsisTrap 28 }
|
|
|
|
rcIsisPeerSmltSplitBeb OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMLT Split-BEB configured in the IST Peer switch."
|
|
::= { rcIsisTrap 29 }
|
|
|
|
rcIsisLocalHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS local host name."
|
|
::= { rcIsisTrap 30 }
|
|
|
|
rcIsisNgbHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS neighbor host name."
|
|
::= { rcIsisTrap 31 }
|
|
|
|
rcIsisPrevInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS local interface index for previously found adj."
|
|
::= { rcIsisTrap 32 }
|
|
|
|
rcIsisSmltVirtBmacMisconfigNodeHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS host name of node that misconfigured SMLT virtual BMAC."
|
|
::= { rcIsisTrap 33}
|
|
|
|
rcIsisSmltVirtBmacMisconfigNodeSysId OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (14))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS system-id of node that misconfigured SMLT virtual BMAC."
|
|
::= { rcIsisTrap 34 }
|
|
|
|
rcIsisLocalChassisMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS local node chassis mac."
|
|
::= { rcIsisTrap 35 }
|
|
|
|
rcIsisRemoteChassisMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Chassis MAC address of the remote ISIS node."
|
|
::= { rcIsisTrap 36 }
|
|
|
|
rcIsisRemoteHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISIS host name of the remote node."
|
|
::= { rcIsisTrap 37}
|
|
|
|
rcIsisPreviousSysId OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (14))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Previously used ISIS System-Id."
|
|
::= { rcIsisTrap 38 }
|
|
|
|
|
|
-- BEGIN rcIsisAdjTable --
|
|
|
|
rcIsisAdjTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisAdjEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS Adjacency, this is extension
|
|
to the isisISAdjTable defined in ISIS MIB"
|
|
::= { rcIsis 10 }
|
|
|
|
rcIsisAdjEntry OBJECT-TYPE
|
|
SYNTAX RcIsisAdjEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisAdj Table. A Entry in
|
|
table exists for each ISIS adjacency"
|
|
INDEX {rcIsisAdjCircIndex,
|
|
rcIsisAdjIndex }
|
|
::= { rcIsisAdjTable 1 }
|
|
|
|
RcIsisAdjEntry ::=
|
|
SEQUENCE {
|
|
rcIsisAdjCircIndex Integer32,
|
|
rcIsisAdjIndex Unsigned32,
|
|
rcIsisAdjHostName OCTET STRING,
|
|
rcIsisAdjIfIndex InterfaceIndex
|
|
}
|
|
|
|
rcIsisAdjCircIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The identifier of this circuit, unique within the
|
|
Intermediate System. This object follows
|
|
the index behavior. This is for SNMP Indexing
|
|
purposes only and need not have any relation to
|
|
any protocol value."
|
|
::= { rcIsisAdjEntry 1 }
|
|
|
|
rcIsisAdjIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value identifying the IS adjacency from all
|
|
other such adjacencies on this circuit. This value is
|
|
automatically assigned by the system when the adjacency
|
|
is created."
|
|
::= { rcIsisAdjEntry 2 }
|
|
|
|
rcIsisAdjHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hostname listed in LSP, or the system name if host
|
|
name is not configured."
|
|
::= { rcIsisAdjEntry 3 }
|
|
|
|
rcIsisAdjIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface to which this
|
|
circuit corresponds."
|
|
::= { rcIsisAdjEntry 4 }
|
|
|
|
-- BEGIN rcIsisLSPTable --
|
|
|
|
rcIsisLSPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisLSPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS LSP, this is extension
|
|
to the isisLSPSummaryTable defined in ISIS MIB"
|
|
::= { rcIsis 11 }
|
|
|
|
rcIsisLSPEntry OBJECT-TYPE
|
|
SYNTAX RcIsisLSPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisLSP Table. A Entry in
|
|
table exists for each ISIS LSP"
|
|
INDEX {rcIsisLSPLevel,
|
|
rcIsisLSPID }
|
|
::= { rcIsisLSPTable 1 }
|
|
|
|
RcIsisLSPEntry ::=
|
|
SEQUENCE {
|
|
rcIsisLSPLevel INTEGER,
|
|
rcIsisLSPID OCTET STRING,
|
|
rcIsisLSPSeq Unsigned32,
|
|
rcIsisLSPHostName OCTET STRING,
|
|
rcIsisLSPNickName Integer32,
|
|
rcIsisLSPLifetimeRemain Unsigned32,
|
|
rcIsisLSPSmltBmac MacAddress
|
|
}
|
|
|
|
rcIsisLSPLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
area(1), -- L1
|
|
domain(2) -- L2
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At which level does this LSP appear?"
|
|
::= { rcIsisLSPEntry 1 }
|
|
|
|
rcIsisLSPID OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 8 byte LSP ID, consisting of the SystemID,
|
|
Circuit ID, and Fragment Number."
|
|
::= { rcIsisLSPEntry 2 }
|
|
|
|
rcIsisLSPSeq OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number for this LSP."
|
|
::= { rcIsisLSPEntry 3 }
|
|
|
|
rcIsisLSPHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hostname listed in LSP, or the system name if host
|
|
name is not configured."
|
|
::= { rcIsisLSPEntry 4 }
|
|
|
|
rcIsisLSPNickName OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PLSB node's nickname"
|
|
::= { rcIsisLSPEntry 5 }
|
|
|
|
rcIsisLSPLifetimeRemain OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remaining lifetime in seconds for this LSP."
|
|
::= { rcIsisLSPEntry 6 }
|
|
|
|
rcIsisLSPSmltBmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SPBM node's SMLT virtual BMAC"
|
|
::= { rcIsisLSPEntry 7 }
|
|
|
|
-- ISIS PLSB IP Unicast FIB Table
|
|
rcIsisPlsbIpUnicastFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbIpUnicastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "Table of IS-IS PLSB IP Unicast FIB. This table has been
|
|
replaced by rcIsisPlsbIpInterIsidUnicastFibTable."
|
|
::= { rcIsis 12 }
|
|
|
|
rcIsisPlsbIpUnicastFibEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbIpUnicastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "An entry of rcIsisPlsbIpUnicastFib Table. A Entry in
|
|
table exists for each PLSB IP unicast forwarding entry."
|
|
INDEX { rcIsisPlsbIpUnicastFibVrfId,
|
|
rcIsisPlsbIpUnicastFibDestinationIpAddrType,
|
|
rcIsisPlsbIpUnicastFibDestinationIpAddr,
|
|
rcIsisPlsbIpUnicastFibDestinationMask,
|
|
rcIsisPlsbIpUnicastFibNextHopBmac,
|
|
rcIsisPlsbIpUnicastFibVlan }
|
|
::= { rcIsisPlsbIpUnicastFibTable 1 }
|
|
|
|
RcIsisPlsbIpUnicastFibEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbIpUnicastFibVrfId Integer32,
|
|
rcIsisPlsbIpUnicastFibDestinationIpAddrType InetAddressType,
|
|
rcIsisPlsbIpUnicastFibDestinationIpAddr InetAddress,
|
|
rcIsisPlsbIpUnicastFibDestinationMask InetAddressPrefixLength,
|
|
rcIsisPlsbIpUnicastFibNextHopBmac MacAddress,
|
|
rcIsisPlsbIpUnicastFibVlan Integer32,
|
|
rcIsisPlsbIpUnicastFibIsid Integer32,
|
|
rcIsisPlsbIpUnicastFibNextHopName DisplayString,
|
|
rcIsisPlsbIpUnicastFibOutgoingPort InterfaceIndex,
|
|
rcIsisPlsbIpUnicastFibPrefixCost Integer32,
|
|
rcIsisPlsbIpUnicastFibSpbmCost Counter64
|
|
}
|
|
|
|
rcIsisPlsbIpUnicastFibVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "VRF ID of the IP unicast FIB entry, 0 indicates NRE."
|
|
::= { rcIsisPlsbIpUnicastFibEntry 1 }
|
|
|
|
rcIsisPlsbIpUnicastFibDestinationIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address type of destination IP Address."
|
|
::= { rcIsisPlsbIpUnicastFibEntry 2 }
|
|
|
|
rcIsisPlsbIpUnicastFibDestinationIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4|16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP Address of the IP unicast FIB entry.
|
|
Support ipv4 size(4) and ipv6 size(16)"
|
|
::= { rcIsisPlsbIpUnicastFibEntry 3 }
|
|
|
|
rcIsisPlsbIpUnicastFibDestinationMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP mask of the IP unicast FIB entry "
|
|
::= { rcIsisPlsbIpUnicastFibEntry 4 }
|
|
|
|
rcIsisPlsbIpUnicastFibNextHopBmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "the nexthop BMAC of the IP unicast FIB entry "
|
|
::= { rcIsisPlsbIpUnicastFibEntry 5 }
|
|
|
|
rcIsisPlsbIpUnicastFibVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan of the IP unicast FIB entry"
|
|
::= { rcIsisPlsbIpUnicastFibEntry 6 }
|
|
|
|
rcIsisPlsbIpUnicastFibIsid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ISID of the IP unicast FIB entry"
|
|
::= { rcIsisPlsbIpUnicastFibEntry 7 }
|
|
|
|
rcIsisPlsbIpUnicastFibNextHopName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the nexthop hostname of the IP unicast FIB entry "
|
|
::= { rcIsisPlsbIpUnicastFibEntry 8 }
|
|
|
|
rcIsisPlsbIpUnicastFibOutgoingPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Outgoing port of the IP unicast Fib entry."
|
|
::= { rcIsisPlsbIpUnicastFibEntry 9 }
|
|
|
|
rcIsisPlsbIpUnicastFibPrefixCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "prefix cost of the IP unicast FIB entry"
|
|
::= { rcIsisPlsbIpUnicastFibEntry 10 }
|
|
|
|
rcIsisPlsbIpUnicastFibSpbmCost OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bmac cost of the IP unicast FIB entry"
|
|
::= { rcIsisPlsbIpUnicastFibEntry 11 }
|
|
|
|
-- ISIS PLSB Unicast FIB Table
|
|
rcIsisPlsbUcastFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbUcastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS PLSB Unicast FIB"
|
|
::= { rcIsis 13 }
|
|
|
|
rcIsisPlsbUcastFibEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbUcastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisPlsbUcastFib Table. A Entry in
|
|
table exists for each PLSB unicast forwarding entry
|
|
generated by ISIS SPF computation"
|
|
INDEX { rcIsisPlsbUcastFibSysId,
|
|
rcIsisPlsbUcastFibVlan,
|
|
rcIsisPlsbUcastFibDestinationMacAddr}
|
|
::= { rcIsisPlsbUcastFibTable 1 }
|
|
|
|
RcIsisPlsbUcastFibEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbUcastFibSysId OCTET STRING,
|
|
rcIsisPlsbUcastFibVlan Integer32,
|
|
rcIsisPlsbUcastFibDestinationMacAddr MacAddress,
|
|
rcIsisPlsbUcastFibOutgoingPort InterfaceIndex,
|
|
rcIsisPlsbUcastFibHostName OCTET STRING,
|
|
rcIsisPlsbUcastFibCost Counter64
|
|
}
|
|
|
|
rcIsisPlsbUcastFibSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "System ID of the node where unicast FIB entry
|
|
come from"
|
|
::= { rcIsisPlsbUcastFibEntry 1 }
|
|
|
|
rcIsisPlsbUcastFibVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan of the unicast FIB entry"
|
|
::= { rcIsisPlsbUcastFibEntry 2 }
|
|
|
|
rcIsisPlsbUcastFibDestinationMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination Mac Address of the unicast FIB entry "
|
|
::= { rcIsisPlsbUcastFibEntry 3 }
|
|
|
|
rcIsisPlsbUcastFibOutgoingPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Outgoing port of the unicast Fib entry."
|
|
::= { rcIsisPlsbUcastFibEntry 4 }
|
|
|
|
rcIsisPlsbUcastFibHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host name of the node where unicast FIB entry
|
|
come from"
|
|
::= { rcIsisPlsbUcastFibEntry 5 }
|
|
|
|
rcIsisPlsbUcastFibCost OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "unicast FIB cost"
|
|
::= { rcIsisPlsbUcastFibEntry 6 }
|
|
|
|
-- ISIS PLSB Multicast FIB Table
|
|
|
|
rcIsisPlsbMcastFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbMcastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS PLSB Multicast FIB"
|
|
::= { rcIsis 14 }
|
|
|
|
rcIsisPlsbMcastFibEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbMcastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisPlsbMcastFib Table. A Entry in
|
|
table exists for each PLSB Multicast forwarding entry
|
|
generated by ISIS SPF computation"
|
|
INDEX { rcIsisPlsbMcastFibSysId,
|
|
rcIsisPlsbMcastFibVlan,
|
|
rcIsisPlsbMcastFibMcastDestMacAddr
|
|
}
|
|
::= { rcIsisPlsbMcastFibTable 1 }
|
|
|
|
RcIsisPlsbMcastFibEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbMcastFibSysId OCTET STRING,
|
|
rcIsisPlsbMcastFibVlan Integer32,
|
|
rcIsisPlsbMcastFibMcastDestMacAddr MacAddress,
|
|
rcIsisPlsbMcastFibIsid Integer32,
|
|
rcIsisPlsbMcastFibNickName Integer32,
|
|
rcIsisPlsbMcastFibType INTEGER,
|
|
rcIsisPlsbMcastFibOutgoingPorts DisplayString,
|
|
rcIsisPlsbMcastFibHostName OCTET STRING,
|
|
rcIsisPlsbMcastFibOutgoingInterfacePorts PortSet,
|
|
rcIsisPlsbMcastFibOutgoingInterfaceMlts OCTET STRING,
|
|
rcIsisPlsbMcastFibIncomingInterface InterfaceIndex
|
|
}
|
|
|
|
rcIsisPlsbMcastFibSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "System ID of the node where multicast FIB entry
|
|
come from"
|
|
::= { rcIsisPlsbMcastFibEntry 1 }
|
|
|
|
rcIsisPlsbMcastFibVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan of the multicast FIB entry"
|
|
::= { rcIsisPlsbMcastFibEntry 2 }
|
|
|
|
rcIsisPlsbMcastFibMcastDestMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Multicast destination Mac Address of the
|
|
multicast FIB entry "
|
|
::= { rcIsisPlsbMcastFibEntry 3 }
|
|
|
|
rcIsisPlsbMcastFibIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Isid id of the multicast FIB entry"
|
|
::= { rcIsisPlsbMcastFibEntry 4 }
|
|
|
|
rcIsisPlsbMcastFibNickName OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "nick name of node where this i-sid got
|
|
configured or discovered"
|
|
::= { rcIsisPlsbMcastFibEntry 5 }
|
|
|
|
rcIsisPlsbMcastFibType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(1),
|
|
discover(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PLSB i-sid type"
|
|
::= { rcIsisPlsbMcastFibEntry 6 }
|
|
|
|
rcIsisPlsbMcastFibOutgoingPorts OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Nni port of the multicast Fib entry. This attribute is
|
|
obsoleted. New attributes rcIsisPlsbMcastFibOutgoingInterfacePorts and
|
|
rcIsisPlsbMcastFibOutgoingInterfaceMlts are added for outgoing interfaces"
|
|
::= { rcIsisPlsbMcastFibEntry 7 }
|
|
|
|
rcIsisPlsbMcastFibHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host name of the node where multicast FIB entry
|
|
come from"
|
|
::= { rcIsisPlsbMcastFibEntry 8 }
|
|
|
|
rcIsisPlsbMcastFibOutgoingInterfacePorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "port Outgoing interface of multicast fib entry.
|
|
Each bit corresponds to a port, as represented by its ifIndex value .
|
|
When a bit has the value one(1), the corresponding port is a member of
|
|
the set. When a bit has the value zero(0), the corresponding port is
|
|
not a member of the set. The encoding is such that the most significant
|
|
bit of octet #1 corresponds to ifIndex 0."
|
|
::= { rcIsisPlsbMcastFibEntry 9 }
|
|
|
|
rcIsisPlsbMcastFibOutgoingInterfaceMlts OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "mlt outgoing interface of multicast fib entry.
|
|
A set of bits represents the MLT IDs.From left to right, the
|
|
first bit set represent MltId 1. The second bit set represent
|
|
MltId 2, and so on so forth, Up to bit 511 which represents
|
|
Mlt Id 512."
|
|
::= { rcIsisPlsbMcastFibEntry 10 }
|
|
|
|
rcIsisPlsbMcastFibIncomingInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Incoming interface (port or mlt) of the multicast Fib
|
|
entry."
|
|
::= { rcIsisPlsbMcastFibEntry 11 }
|
|
|
|
rcIsisPlsbNodeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS PLSB Node"
|
|
::= { rcIsis 15 }
|
|
|
|
rcIsisPlsbNodeEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisPlsbNode Table. A Entry in
|
|
table exists for each node running PLSB ISIS
|
|
in the setup."
|
|
INDEX { rcIsisPlsbNodeSysId }
|
|
::= { rcIsisPlsbNodeTable 1 }
|
|
|
|
RcIsisPlsbNodeEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbNodeSysId OCTET STRING,
|
|
rcIsisPlsbNodePrimaryParentSysId OCTET STRING,
|
|
rcIsisPlsbNodePrimaryBvlan Integer32,
|
|
rcIsisPlsbNodeSecondaryParentSysId OCTET STRING,
|
|
rcIsisPlsbNodeSecondaryBvlan Integer32
|
|
}
|
|
|
|
rcIsisPlsbNodeSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "System ID of the PLSB node entry"
|
|
::= { rcIsisPlsbNodeEntry 1 }
|
|
|
|
rcIsisPlsbNodePrimaryParentSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "System ID of parent node of the PLSB node entry for
|
|
primary bvlan"
|
|
::= { rcIsisPlsbNodeEntry 2 }
|
|
|
|
rcIsisPlsbNodePrimaryBvlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "spbm primary b-vlan"
|
|
::= { rcIsisPlsbNodeEntry 3 }
|
|
|
|
rcIsisPlsbNodeSecondaryParentSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "System ID of parent node of the PLSB node entry for
|
|
secondary bvlan"
|
|
::= { rcIsisPlsbNodeEntry 4 }
|
|
|
|
rcIsisPlsbNodeSecondaryBvlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "spbm secondary b-vlan"
|
|
::= { rcIsisPlsbNodeEntry 5 }
|
|
|
|
rcIsisSpbmPortDropStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisSpbmPortDropStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS SPBM port drop-stats by
|
|
port index and SPBM b-vlan"
|
|
::= { rcIsis 16 }
|
|
|
|
rcIsisSpbmPortDropStatsEntry OBJECT-TYPE
|
|
SYNTAX RcIsisSpbmPortDropStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SPBM port based frame drop counters."
|
|
INDEX { rcIsisSpbmPortDropStatsPortIndex,
|
|
rcIsisSpbmPortDropStatsVlanId }
|
|
::= { rcIsisSpbmPortDropStatsTable 1 }
|
|
|
|
RcIsisSpbmPortDropStatsEntry ::= SEQUENCE {
|
|
rcIsisSpbmPortDropStatsPortIndex InterfaceIndex,
|
|
rcIsisSpbmPortDropStatsVlanId Integer32,
|
|
rcIsisSpbmPortDropStatsVlanType INTEGER,
|
|
rcIsisSpbmPortDropStatsUnknownUcastSrcAddr Counter64,
|
|
rcIsisSpbmPortDropStatsRpfcUcastSrcAddr Counter64,
|
|
rcIsisSpbmPortDropStatsUnknownUcastDestAddr Counter64,
|
|
rcIsisSpbmPortDropStatsUnknownMcastDestAddr Counter64,
|
|
rcIsisSpbmPortDropStatsRpfcMcastSrcAddr Counter64,
|
|
rcIsisSpbmPortDropStatsLastDropMac MacAddress,
|
|
rcIsisSpbmPortDropStatsIsMacDestAddr TruthValue,
|
|
rcIsisSpbmPortDropStatsLastDropMacHostName OCTET STRING
|
|
}
|
|
|
|
rcIsisSpbmPortDropStatsPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { rcIsisSpbmPortDropStatsEntry 1 }
|
|
|
|
rcIsisSpbmPortDropStatsVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the SPBM Virtual LAN
|
|
associated with this entry."
|
|
::= { rcIsisSpbmPortDropStatsEntry 2}
|
|
|
|
rcIsisSpbmPortDropStatsVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the type of SPBM bvlan"
|
|
::= { rcIsisSpbmPortDropStatsEntry 3}
|
|
|
|
rcIsisSpbmPortDropStatsUnknownUcastSrcAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM unknown unicast SA packets
|
|
dropped on SPBM bvlan."
|
|
::= { rcIsisSpbmPortDropStatsEntry 4}
|
|
|
|
rcIsisSpbmPortDropStatsRpfcUcastSrcAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM reverse path forwarding
|
|
check (RPFC) unicast SA packets
|
|
dropped on SPBM bvlan."
|
|
::= { rcIsisSpbmPortDropStatsEntry 5}
|
|
|
|
rcIsisSpbmPortDropStatsUnknownUcastDestAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM unknown unicast DA packets
|
|
dropped on SPBM bvlan."
|
|
::= { rcIsisSpbmPortDropStatsEntry 6}
|
|
|
|
rcIsisSpbmPortDropStatsUnknownMcastDestAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM unknown multicast DA packets
|
|
dropped on SPBM bvlan."
|
|
::= { rcIsisSpbmPortDropStatsEntry 7}
|
|
|
|
rcIsisSpbmPortDropStatsRpfcMcastSrcAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM reverse path forwarding
|
|
check (RPFC) multicast SA packets
|
|
dropped on SPBM bvlan."
|
|
::= { rcIsisSpbmPortDropStatsEntry 8}
|
|
|
|
rcIsisSpbmPortDropStatsLastDropMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The DA or SA last dropped on SPBM bvlan."
|
|
::= { rcIsisSpbmPortDropStatsEntry 9}
|
|
|
|
rcIsisSpbmPortDropStatsIsMacDestAddr OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The last dropped mac on SPBM bvlan is DA or not."
|
|
::= { rcIsisSpbmPortDropStatsEntry 10}
|
|
|
|
rcIsisSpbmPortDropStatsLastDropMacHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The host name of the nodes where last dropped
|
|
SA or DA on SPBM bvlan belongs"
|
|
::= { rcIsisSpbmPortDropStatsEntry 11}
|
|
|
|
|
|
rcIsisSpbmSrcAddrDropStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisSpbmSrcAddrDropStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS SPBM SA drop-stats by
|
|
Source Address and SPBM b-vlan"
|
|
::= { rcIsis 17 }
|
|
|
|
rcIsisSpbmSrcAddrDropStatsEntry OBJECT-TYPE
|
|
SYNTAX RcIsisSpbmSrcAddrDropStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SPBM Source Address based frame drop counters."
|
|
INDEX { rcIsisSpbmSrcAddrDropStatsAddr,
|
|
rcIsisSpbmSrcAddrDropStatsVlanId }
|
|
::= { rcIsisSpbmSrcAddrDropStatsTable 1 }
|
|
|
|
RcIsisSpbmSrcAddrDropStatsEntry ::= SEQUENCE {
|
|
rcIsisSpbmSrcAddrDropStatsAddr MacAddress,
|
|
rcIsisSpbmSrcAddrDropStatsVlanId Integer32,
|
|
rcIsisSpbmSrcAddrDropStatsVlanType INTEGER,
|
|
rcIsisSpbmSrcAddrDropStatsRpfcUcastSrcAddr Counter64,
|
|
rcIsisSpbmSrcAddrDropStatsUnknownUcastDestAddr Counter64,
|
|
rcIsisSpbmSrcAddrDropStatsRpfcMcastSrcAddr Counter64,
|
|
rcIsisSpbmSrcAddrDropStatsUnknownMcastDestAddr Counter64,
|
|
rcIsisSpbmSrcAddrDropStatsUnknownUcastSrcAddr Counter64,
|
|
rcIsisSpbmSrcAddrDropStatsHostName OCTET STRING
|
|
}
|
|
|
|
rcIsisSpbmSrcAddrDropStatsAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The source MAC of the drop packet."
|
|
::= { rcIsisSpbmSrcAddrDropStatsEntry 1 }
|
|
|
|
rcIsisSpbmSrcAddrDropStatsVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the SPBM Virtual LAN
|
|
associated with this entry."
|
|
::= { rcIsisSpbmSrcAddrDropStatsEntry 2}
|
|
|
|
rcIsisSpbmSrcAddrDropStatsVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the type of SPBM bvlan"
|
|
::= { rcIsisSpbmSrcAddrDropStatsEntry 3}
|
|
|
|
rcIsisSpbmSrcAddrDropStatsRpfcUcastSrcAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM reverse path forwarding
|
|
check (RPFC) unicast SA packets
|
|
dropped on SPBM bvlan."
|
|
::= { rcIsisSpbmSrcAddrDropStatsEntry 4}
|
|
|
|
rcIsisSpbmSrcAddrDropStatsUnknownUcastDestAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM unknown unicast DA packets
|
|
dropped on SPBM bvlan"
|
|
::= { rcIsisSpbmSrcAddrDropStatsEntry 5}
|
|
|
|
rcIsisSpbmSrcAddrDropStatsRpfcMcastSrcAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM reverse path forwarding
|
|
check (RPFC) multicast SA packets
|
|
dropped on SPBM bvlan"
|
|
::= { rcIsisSpbmSrcAddrDropStatsEntry 6}
|
|
|
|
rcIsisSpbmSrcAddrDropStatsUnknownMcastDestAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM unknown multicast DA packets
|
|
dropped on SPBM bvlan"
|
|
::= { rcIsisSpbmSrcAddrDropStatsEntry 7}
|
|
|
|
rcIsisSpbmSrcAddrDropStatsUnknownUcastSrcAddr OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of SPBM unknown unicast SA packets
|
|
dropped on SPBM bvlan"
|
|
::= { rcIsisSpbmSrcAddrDropStatsEntry 8}
|
|
|
|
rcIsisSpbmSrcAddrDropStatsHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The host name of the nodes where last on
|
|
SPBM bvlan belongs"
|
|
::= { rcIsisSpbmSrcAddrDropStatsEntry 9}
|
|
|
|
rcIsisSpbmUniTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisSpbmUniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table containing information about
|
|
defined I-SIDs and their current
|
|
use on the platform from an SPBM
|
|
perspective."
|
|
::= { rcIsis 18 }
|
|
|
|
rcIsisSpbmUniEntry OBJECT-TYPE
|
|
SYNTAX RcIsisSpbmUniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An rcIsisSpbmUniTable entry. An
|
|
entry exists for each I-SID that
|
|
is currently defined. Entry instance
|
|
data indicates current I-SID usage
|
|
from a UNI perspective as follows:
|
|
|
|
Port VLAN ID UNI Type
|
|
-----------------------------------------------------
|
|
0 1..4094 C-VLAN UNI
|
|
1..PortMax 1..4094 Switched UNI
|
|
1..PortMax 4096 Switched UNI untagged [Not supported]
|
|
1..PortMax 4095 Transparent UNI"
|
|
|
|
INDEX { rcIsisSpbmUniIsid, rcIsisSpbmUniPort, rcIsisSpbmUniVlan }
|
|
::= { rcIsisSpbmUniTable 1 }
|
|
|
|
RcIsisSpbmUniEntry ::=
|
|
SEQUENCE {
|
|
rcIsisSpbmUniIsid Integer32,
|
|
rcIsisSpbmUniPort InterfaceIndexOrZero,
|
|
rcIsisSpbmUniVlan Integer32,
|
|
rcIsisSpbmUniRowStatus RowStatus,
|
|
rcIsisSpbmUniStorage StorageType
|
|
}
|
|
|
|
rcIsisSpbmUniIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The I-SID key for this entry."
|
|
|
|
::= { rcIsisSpbmUniEntry 1 }
|
|
|
|
rcIsisSpbmUniPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A port that is associated with the I-SID key
|
|
for this entry.
|
|
|
|
A value equal to 0 indicates that a port is
|
|
not associated with the entry I-SID key,
|
|
meaning that the entry represents a C-VLAN
|
|
UNI mapping."
|
|
|
|
::= { rcIsisSpbmUniEntry 2 }
|
|
|
|
rcIsisSpbmUniVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4095)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Virtual
|
|
LAN associated with this entry. This value
|
|
corresponds to the lower 12 bits in the IEEE
|
|
802.1Q VLAN Tag.
|
|
|
|
A value equal to 4095 indicates that a VLAN
|
|
is not associated with the entry I-SID key,
|
|
meaning that the entry represents a Transparent
|
|
UNI mapping."
|
|
|
|
::= { rcIsisSpbmUniEntry 3 }
|
|
|
|
rcIsisSpbmUniRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This is used to control creation/deletion of entries
|
|
in this table."
|
|
|
|
::= { rcIsisSpbmUniEntry 4 }
|
|
|
|
rcIsisSpbmUniStorage OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object retrieves the storage type for this entry."
|
|
|
|
::= { rcIsisSpbmUniEntry 5 }
|
|
|
|
-- If the following table is modified, you MUST make sure
|
|
-- that table rcIsisSpbmIpMcastRouteUniRcvrsTable is also
|
|
-- modified, as it must have the same indices as the following
|
|
-- table (plus egressVlan)!!
|
|
rcIsisSpbmIpMcastRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisSpbmIpMcastRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "SPBM IP Multicast Route Table
|
|
This table has been replaced by the
|
|
rcIsisSpbmIpIsidMcastRouteTable."
|
|
::= { rcIsis 19 }
|
|
|
|
rcIsisSpbmIpMcastRouteEntry OBJECT-TYPE
|
|
SYNTAX RcIsisSpbmIpMcastRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "SPBM IP Multicast Route Entry"
|
|
INDEX { rcIsisSpbmIpMcastGroup,
|
|
rcIsisSpbmIpMcastSource,
|
|
rcIsisSpbmIpMcastVsnIsid,
|
|
rcIsisSpbmIpMcastNickName }
|
|
::= { rcIsisSpbmIpMcastRouteTable 1 }
|
|
|
|
RcIsisSpbmIpMcastRouteEntry ::= SEQUENCE {
|
|
rcIsisSpbmIpMcastGroup IpAddress,
|
|
rcIsisSpbmIpMcastSource IpAddress,
|
|
rcIsisSpbmIpMcastVsnIsid Integer32,
|
|
rcIsisSpbmIpMcastNickName Integer32,
|
|
rcIsisSpbmIpMcastSourceBeb OCTET STRING,
|
|
rcIsisSpbmIpMcastVlanId Integer32,
|
|
rcIsisSpbmIpMcastVrfName DisplayString,
|
|
rcIsisSpbmIpMcastDataIsid Integer32,
|
|
rcIsisSpbmIpMcastNniPorts DisplayString,
|
|
rcIsisSpbmIpMcastType INTEGER,
|
|
rcIsisSpbmIpMcastBvlan Integer32,
|
|
rcIsisSpbmIpMcastNniInterfacePorts PortSet,
|
|
rcIsisSpbmIpMcastNniInterfaceMlts OCTET STRING
|
|
}
|
|
|
|
rcIsisSpbmIpMcastGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIsisSpbmIpMcastRouteEntry 1 }
|
|
|
|
rcIsisSpbmIpMcastSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the multicast source for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIsisSpbmIpMcastRouteEntry 2 }
|
|
|
|
rcIsisSpbmIpMcastVsnIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual Services Network ISID"
|
|
::= { rcIsisSpbmIpMcastRouteEntry 3 }
|
|
|
|
rcIsisSpbmIpMcastNickName OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast nick name"
|
|
::= { rcIsisSpbmIpMcastRouteEntry 4 }
|
|
|
|
rcIsisSpbmIpMcastSourceBeb OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Backbone Edge Bridge name"
|
|
::= { rcIsisSpbmIpMcastRouteEntry 5 }
|
|
|
|
rcIsisSpbmIpMcastVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID of the interface"
|
|
::= { rcIsisSpbmIpMcastRouteEntry 6 }
|
|
|
|
rcIsisSpbmIpMcastVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VRF name of the interface"
|
|
::= { rcIsisSpbmIpMcastRouteEntry 7 }
|
|
|
|
|
|
rcIsisSpbmIpMcastDataIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data ISID"
|
|
::= { rcIsisSpbmIpMcastRouteEntry 8 }
|
|
|
|
|
|
rcIsisSpbmIpMcastNniPorts OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"List of NNI ports. This attribute is obsoleted. New attributes
|
|
rcIsisSpbmIpMcastNniInterfacePorts and rcIsisSpbmIpMcastNniInterfaceMlts
|
|
are added for nni interfaces"
|
|
::= { rcIsisSpbmIpMcastRouteEntry 9 }
|
|
|
|
rcIsisSpbmIpMcastType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
routed(1),
|
|
snoop(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the type of the interface"
|
|
::= { rcIsisSpbmIpMcastRouteEntry 10}
|
|
|
|
rcIsisSpbmIpMcastBvlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Backbone VLAN on which SPB traffic is carried"
|
|
::= { rcIsisSpbmIpMcastRouteEntry 11 }
|
|
|
|
rcIsisSpbmIpMcastNniInterfacePorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "list of port nni interface. Each bit corresponds to a
|
|
port, as represented by its ifIndex value. When a bit has the value one(1),
|
|
the corresponding port is a member of the set. When a bit has the value
|
|
zero(0), the corresponding port is not a member of the set. The encoding
|
|
is such that the most significant bit of octet #1 corresponds to ifIndex 0."
|
|
::= { rcIsisSpbmIpMcastRouteEntry 12 }
|
|
|
|
rcIsisSpbmIpMcastNniInterfaceMlts OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "list of mlt nni interface. A set of bits represents the
|
|
MLT IDs.From left to right, the first bit set represent MltId 1. The
|
|
second bit set represent MltId 2, and so on so forth, Up to bit 511
|
|
which represents Mlt Id 512."
|
|
::= { rcIsisSpbmIpMcastRouteEntry 13 }
|
|
|
|
-- Spbm ip multicast route UNI receivers table (vlan/port pairs).
|
|
-- MUST have same indices as the rcIsisSpbmIpMcastRouteTable
|
|
-- with the addition of egressVlan!!
|
|
-- This table is used in conjunction with rcIsisSpbmIpMcastRouteTable
|
|
-- in order to gather up all the UNI receivers.
|
|
rcIsisSpbmIpMcastRouteUniRcvrsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisSpbmIpMcastRouteUniRcvrsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "SPBM IP Multicast Route UNI Receivers Table
|
|
This table has been replaced by the
|
|
rcIsisSpbmIpIsidMcastRouteUniRcvrsTable."
|
|
::= { rcIsis 20 }
|
|
|
|
rcIsisSpbmIpMcastRouteUniRcvrsEntry OBJECT-TYPE
|
|
SYNTAX RcIsisSpbmIpMcastRouteUniRcvrsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION "SPBM IP Multicast Route UNI Receivers Entry"
|
|
INDEX { rcIsisSpbmIpMcastUniRcvrsGroup,
|
|
rcIsisSpbmIpMcastUniRcvrsSource,
|
|
rcIsisSpbmIpMcastUniRcvrsVsnIsid,
|
|
rcIsisSpbmIpMcastUniRcvrsNickName,
|
|
rcIsisSpbmIpMcastUniRcvrsEgressVlan }
|
|
::= { rcIsisSpbmIpMcastRouteUniRcvrsTable 1 }
|
|
|
|
RcIsisSpbmIpMcastRouteUniRcvrsEntry ::= SEQUENCE {
|
|
rcIsisSpbmIpMcastUniRcvrsGroup IpAddress,
|
|
rcIsisSpbmIpMcastUniRcvrsSource IpAddress,
|
|
rcIsisSpbmIpMcastUniRcvrsVsnIsid Integer32,
|
|
rcIsisSpbmIpMcastUniRcvrsNickName Integer32,
|
|
rcIsisSpbmIpMcastUniRcvrsEgressVlan Integer32,
|
|
rcIsisSpbmIpMcastUniRcvrsEgressActivePorts PortSet
|
|
}
|
|
rcIsisSpbmIpMcastUniRcvrsGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIsisSpbmIpMcastRouteUniRcvrsEntry 1 }
|
|
|
|
rcIsisSpbmIpMcastUniRcvrsSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the multicast source for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIsisSpbmIpMcastRouteUniRcvrsEntry 2 }
|
|
|
|
rcIsisSpbmIpMcastUniRcvrsVsnIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual Services Network ISID"
|
|
::= { rcIsisSpbmIpMcastRouteUniRcvrsEntry 3 }
|
|
|
|
rcIsisSpbmIpMcastUniRcvrsNickName OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast nick name"
|
|
::= { rcIsisSpbmIpMcastRouteUniRcvrsEntry 4 }
|
|
|
|
rcIsisSpbmIpMcastUniRcvrsEgressVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan associated with this egress entry. "
|
|
::= { rcIsisSpbmIpMcastRouteUniRcvrsEntry 5 }
|
|
|
|
rcIsisSpbmIpMcastUniRcvrsEgressActivePorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports in the vlan that have UNI receivers for this multicast route. "
|
|
::= { rcIsisSpbmIpMcastRouteUniRcvrsEntry 6 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbIpInterIsidUnicastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS PLSB IP Inter Isid Unicast FIB.
|
|
This table will replace rcIsisPlsbIpUnicastFibTable"
|
|
::= { rcIsis 21 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbIpInterIsidUnicastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisPlsbIpInterIsidUnicastFib Table.
|
|
An Entry table exists for each PLSB IP unicast
|
|
forwarding entry."
|
|
INDEX { rcIsisPlsbIpInterIsidUnicastFibVrfId,
|
|
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddrType,
|
|
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddr,
|
|
rcIsisPlsbIpInterIsidUnicastFibDestinationMask,
|
|
rcIsisPlsbIpInterIsidUnicastFibNextHopBmac,
|
|
rcIsisPlsbIpInterIsidUnicastFibDestIsid,
|
|
rcIsisPlsbIpInterIsidUnicastFibVlan }
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibTable 1 }
|
|
|
|
RcIsisPlsbIpInterIsidUnicastFibEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbIpInterIsidUnicastFibVrfId Integer32,
|
|
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddrType InetAddressType,
|
|
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddr InetAddress,
|
|
rcIsisPlsbIpInterIsidUnicastFibDestinationMask InetAddressPrefixLength,
|
|
rcIsisPlsbIpInterIsidUnicastFibNextHopBmac MacAddress,
|
|
rcIsisPlsbIpInterIsidUnicastFibDestIsid Integer32,
|
|
rcIsisPlsbIpInterIsidUnicastFibVlan Integer32,
|
|
rcIsisPlsbIpInterIsidUnicastFibIsid Integer32,
|
|
rcIsisPlsbIpInterIsidUnicastFibNextHopName DisplayString,
|
|
rcIsisPlsbIpInterIsidUnicastFibOutgoingPort InterfaceIndex,
|
|
rcIsisPlsbIpInterIsidUnicastFibPrefixCost Integer32,
|
|
rcIsisPlsbIpInterIsidUnicastFibSpbmCost Counter64,
|
|
rcIsisPlsbIpInterIsidUnicastFibPreference Integer32,
|
|
rcIsisPlsbIpInterIsidUnicastFibMetricType INTEGER
|
|
}
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..512)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "VRF ID of the IP unicast FIB entry, 0 indicates NRE."
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 1 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address type of destination IP Address."
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 2 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4|16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP Address of the IP unicast FIB entry.
|
|
Support ipv4 size(4) and ipv6 size(16)"
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 3 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibDestinationMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP mask of the IP unicast FIB entry "
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 4 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibNextHopBmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The nexthop BMAC of the IP unicast FIB entry "
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 5 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibDestIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination ISID of the IP unicast FIB entry "
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 6 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan of the IP unicast FIB entry.
|
|
The value of 0 is associated with a local
|
|
Inter VSN circuitless IP interface fib entry."
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 7 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibIsid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ISID of the IP unicast FIB entry"
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 8 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibNextHopName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The nexthop hostname of the IP unicast FIB entry "
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 9 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibOutgoingPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Outgoing port of the IP unicast Fib entry."
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 10 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibPrefixCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "prefix cost of the IP unicast FIB entry"
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 11 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibSpbmCost OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Bmac cost of the IP unicast FIB entry"
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 12 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibPreference OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP Route preference of the IP unicast FIB entry"
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 13 }
|
|
|
|
rcIsisPlsbIpInterIsidUnicastFibMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal(1),
|
|
external(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP Metric Type of the IP unicast FIB entry"
|
|
::= { rcIsisPlsbIpInterIsidUnicastFibEntry 14 }
|
|
|
|
rcIsisSpbmScalars OBJECT IDENTIFIER ::= { rcIsis 22 }
|
|
|
|
rcIsisSpbmLoopbackPortCurrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
stack(2),
|
|
frontPanel(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the current SPBM-reserved loopback port."
|
|
::= { rcIsisSpbmScalars 1 }
|
|
|
|
rcIsisSpbmLoopbackPortNextState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
stack(2),
|
|
frontPanel(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the next SPBM-reserved loopback port (after reboot)."
|
|
::= { rcIsisSpbmScalars 2 }
|
|
|
|
-- ISIS PLSB IPV6 Unicast FIB Table
|
|
rcIsisPlsbIpv6UnicastFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisPlsbIpv6UnicastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of IS-IS PLSB IPV6 Unicast FIB"
|
|
::= { rcIsis 23 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibEntry OBJECT-TYPE
|
|
SYNTAX RcIsisPlsbIpv6UnicastFibEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcIsisPlsbIpv6UnicastFib Table. A Entry in
|
|
table exists for each PLSB IPV6 unicast forwarding entry."
|
|
INDEX { rcIsisPlsbIpv6UnicastFibVrfId,
|
|
rcIsisPlsbIpv6UnicastFibDestinationIpAddrType,
|
|
rcIsisPlsbIpv6UnicastFibDestinationIpAddr,
|
|
rcIsisPlsbIpv6UnicastFibDestinationMask,
|
|
rcIsisPlsbIpv6UnicastFibNextHopBmac,
|
|
rcIsisPlsbIpv6UnicastFibDestIsid,
|
|
rcIsisPlsbIpv6UnicastFibVlan }
|
|
::= { rcIsisPlsbIpv6UnicastFibTable 1 }
|
|
|
|
RcIsisPlsbIpv6UnicastFibEntry ::=
|
|
SEQUENCE {
|
|
rcIsisPlsbIpv6UnicastFibVrfId Integer32,
|
|
rcIsisPlsbIpv6UnicastFibDestinationIpAddrType InetAddressType,
|
|
rcIsisPlsbIpv6UnicastFibDestinationIpAddr InetAddress,
|
|
rcIsisPlsbIpv6UnicastFibDestinationMask InetAddressPrefixLength,
|
|
rcIsisPlsbIpv6UnicastFibNextHopBmac MacAddress,
|
|
rcIsisPlsbIpv6UnicastFibDestIsid Integer32,
|
|
rcIsisPlsbIpv6UnicastFibVlan Integer32,
|
|
rcIsisPlsbIpv6UnicastFibIsid Integer32,
|
|
rcIsisPlsbIpv6UnicastFibNextHopName DisplayString,
|
|
rcIsisPlsbIpv6UnicastFibOutgoingPort InterfaceIndex,
|
|
rcIsisPlsbIpv6UnicastFibPrefixCost Integer32,
|
|
rcIsisPlsbIpv6UnicastFibSpbmCost Counter64
|
|
}
|
|
|
|
rcIsisPlsbIpv6UnicastFibVrfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..512)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "VRF ID of the IPV6 unicast FIB entry, 0 indicates NRE."
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 1 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibDestinationIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address type of destination IPV6 Address."
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 2 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibDestinationIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4|16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP Address of the IPV6 unicast FIB entry."
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 3 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibDestinationMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP mask of the IPV6 unicast FIB entry "
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 4 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibNextHopBmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "the nexthop BMAC of the IPV6 unicast FIB entry "
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 5 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibDestIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination ISID of the IPv6 unicast FIB entry "
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 6 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4084)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan of the IPV6 unicast FIB entry"
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 7 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibIsid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "ISID of the IPV6 unicast FIB entry"
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 8 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibNextHopName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the nexthop hostname of the IPV6 unicast FIB entry "
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 9 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibOutgoingPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Outgoing port of the IPV6 unicast Fib entry."
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 10 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibPrefixCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "prefix cost of the IPV6 unicast FIB entry"
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 11 }
|
|
|
|
rcIsisPlsbIpv6UnicastFibSpbmCost OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "bmac cost of the IPV6 unicast FIB entry"
|
|
::= { rcIsisPlsbIpv6UnicastFibEntry 12 }
|
|
|
|
-- If the following table is modified, you MUST make sure
|
|
-- that table rcIsisSpbmIsidIpMcastRouteUniRcvrsTable is also
|
|
-- modified, as it must have the same indices as the following
|
|
-- table (plus egressVlan)!!
|
|
rcIsisSpbmIpIsidMcastRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisSpbmIpIsidMcastRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SPBM IP Isid Multicast Route Table"
|
|
::= { rcIsis 24 }
|
|
|
|
rcIsisSpbmIpIsidMcastRouteEntry OBJECT-TYPE
|
|
SYNTAX RcIsisSpbmIpIsidMcastRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SPBM IP Isid Multicast Route Entry"
|
|
INDEX { rcIsisSpbmIpIsidMcastVsnIsid,
|
|
rcIsisSpbmIpIsidMcastGroup,
|
|
rcIsisSpbmIpIsidMcastSource,
|
|
rcIsisSpbmIpIsidMcastNickName }
|
|
::= { rcIsisSpbmIpIsidMcastRouteTable 1 }
|
|
|
|
RcIsisSpbmIpIsidMcastRouteEntry ::= SEQUENCE {
|
|
rcIsisSpbmIpIsidMcastVsnIsid Integer32,
|
|
rcIsisSpbmIpIsidMcastGroup IpAddress,
|
|
rcIsisSpbmIpIsidMcastSource IpAddress,
|
|
rcIsisSpbmIpIsidMcastNickName Integer32,
|
|
rcIsisSpbmIpIsidMcastSourceBeb OCTET STRING,
|
|
rcIsisSpbmIpIsidMcastVlanId Integer32,
|
|
rcIsisSpbmIpIsidMcastVrfName DisplayString,
|
|
rcIsisSpbmIpIsidMcastDataIsid Integer32,
|
|
rcIsisSpbmIpIsidMcastType INTEGER,
|
|
rcIsisSpbmIpIsidMcastBvlan Integer32,
|
|
rcIsisSpbmIpIsidMcastNniInterfacePorts PortSet,
|
|
rcIsisSpbmIpIsidMcastNniInterfaceMlts OCTET STRING
|
|
}
|
|
|
|
rcIsisSpbmIpIsidMcastVsnIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual Services Network ISID"
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 1 }
|
|
|
|
rcIsisSpbmIpIsidMcastGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 2 }
|
|
|
|
rcIsisSpbmIpIsidMcastSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the multicast source for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 3 }
|
|
|
|
rcIsisSpbmIpIsidMcastNickName OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast nick name"
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 4 }
|
|
|
|
rcIsisSpbmIpIsidMcastSourceBeb OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Backbone Edge Bridge name"
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 5 }
|
|
|
|
rcIsisSpbmIpIsidMcastVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID of the interface"
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 6 }
|
|
|
|
rcIsisSpbmIpIsidMcastVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VRF name of the interface"
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 7 }
|
|
|
|
|
|
rcIsisSpbmIpIsidMcastDataIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data ISID"
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 8 }
|
|
|
|
rcIsisSpbmIpIsidMcastType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
routed(1),
|
|
snoop(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the type of the interface"
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 9}
|
|
|
|
rcIsisSpbmIpIsidMcastBvlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Backbone VLAN on which SPB traffic is carried"
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 10 }
|
|
|
|
rcIsisSpbmIpIsidMcastNniInterfacePorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "list of port nni interface. Each bit corresponds to a
|
|
port, as represented by its ifIndex value.
|
|
When a bit has the value one(1), the corresponding port is a member
|
|
of the set. When a bit has the value
|
|
zero(0), the corresponding port is not a member of the set.
|
|
The encoding is such that the most significant bit of octet #1
|
|
corresponds to ifIndex 0."
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 11 }
|
|
|
|
rcIsisSpbmIpIsidMcastNniInterfaceMlts OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "list of mlt nni interface. A set of bits represents the
|
|
MLT IDs.From left to right, the first bit set represent MltId 1. The
|
|
second bit set represent MltId 2, and so on so forth, Up to bit 511
|
|
which represents Mlt Id 512."
|
|
::= { rcIsisSpbmIpIsidMcastRouteEntry 12 }
|
|
|
|
-- Spbm ip multicast route UNI receivers table (vlan/port pairs).
|
|
-- MUST have same indices as the rcIsisSpbmIpIsidMcastRouteTable
|
|
-- with the addition of egressVlan!!
|
|
-- This table is used in conjunction with rcIsisSpbmIpIsidMcastRouteTable
|
|
-- in order to gather up all the UNI receivers.
|
|
rcIsisSpbmIpIsidMcastRouteUniRcvrsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisSpbmIpIsidMcastRouteUniRcvrsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SPBM IP Isid Multicast Route UNI Receivers Table"
|
|
::= { rcIsis 25 }
|
|
|
|
rcIsisSpbmIpIsidMcastRouteUniRcvrsEntry OBJECT-TYPE
|
|
SYNTAX RcIsisSpbmIpIsidMcastRouteUniRcvrsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "SPBM IP Isid Multicast Route UNI Receivers Entry"
|
|
INDEX { rcIsisSpbmIpIsidMcastUniRcvrsVsnIsid,
|
|
rcIsisSpbmIpIsidMcastUniRcvrsGroup,
|
|
rcIsisSpbmIpIsidMcastUniRcvrsSource,
|
|
rcIsisSpbmIpIsidMcastUniRcvrsNickName,
|
|
rcIsisSpbmIpIsidMcastUniRcvrsEgressVlan }
|
|
::= { rcIsisSpbmIpIsidMcastRouteUniRcvrsTable 1 }
|
|
|
|
RcIsisSpbmIpIsidMcastRouteUniRcvrsEntry ::= SEQUENCE {
|
|
rcIsisSpbmIpIsidMcastUniRcvrsVsnIsid Integer32,
|
|
rcIsisSpbmIpIsidMcastUniRcvrsGroup IpAddress,
|
|
rcIsisSpbmIpIsidMcastUniRcvrsSource IpAddress,
|
|
rcIsisSpbmIpIsidMcastUniRcvrsNickName Integer32,
|
|
rcIsisSpbmIpIsidMcastUniRcvrsEgressVlan Integer32,
|
|
rcIsisSpbmIpIsidMcastUniRcvrsEgressActivePorts PortSet
|
|
}
|
|
|
|
rcIsisSpbmIpIsidMcastUniRcvrsVsnIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Virtual Services Network ISID"
|
|
::= { rcIsisSpbmIpIsidMcastRouteUniRcvrsEntry 1 }
|
|
|
|
rcIsisSpbmIpIsidMcastUniRcvrsGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIsisSpbmIpIsidMcastRouteUniRcvrsEntry 2 }
|
|
|
|
rcIsisSpbmIpIsidMcastUniRcvrsSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the multicast source for which this entry
|
|
contains multicast routing information."
|
|
::= { rcIsisSpbmIpIsidMcastRouteUniRcvrsEntry 3 }
|
|
|
|
rcIsisSpbmIpIsidMcastUniRcvrsNickName OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast nick name"
|
|
::= { rcIsisSpbmIpIsidMcastRouteUniRcvrsEntry 4 }
|
|
|
|
rcIsisSpbmIpIsidMcastUniRcvrsEgressVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan associated with this egress entry. "
|
|
::= { rcIsisSpbmIpIsidMcastRouteUniRcvrsEntry 5 }
|
|
|
|
rcIsisSpbmIpIsidMcastUniRcvrsEgressActivePorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports in the vlan that have UNI receivers for this multicast route. "
|
|
::= { rcIsisSpbmIpIsidMcastRouteUniRcvrsEntry 6 }
|
|
|
|
rcIsisLogicalInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisLogicalInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ISIS logical interface."
|
|
::= { rcIsis 26 }
|
|
rcIsisLogicalInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIsisLogicalInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry contains the configuration information about the logical isis interface"
|
|
INDEX { rcIsisLogicalInterfaceId }
|
|
::= { rcIsisLogicalInterfaceTable 1 }
|
|
|
|
RcIsisLogicalInterfaceEntry ::= SEQUENCE {
|
|
rcIsisLogicalInterfaceId Integer32,
|
|
rcIsisLogicalInterfaceIfIndex InterfaceIndex,
|
|
rcIsisLogicalInterfaceType INTEGER,
|
|
rcIsisLogicalInterfaceDestIPAddr IpAddress,
|
|
rcIsisLogicalInterfaceDestIfIndex InterfaceIndex,
|
|
rcIsisLogicalInterfaceVids OCTET STRING,
|
|
rcIsisLogicalInterfacePrimaryVid Integer32,
|
|
rcIsisLogicalInterfaceName DisplayString,
|
|
rcIsisLogicalInterfaceRowStatus RowStatus,
|
|
rcIsisLogicalInterfaceCircIndex IndexInteger,
|
|
rcIsisLogicalInterfaceNextHopIfIndex InterfaceIndex,
|
|
rcIsisLogicalInterfaceNextHopVid Integer32,
|
|
rcIsisLogicalInterfaceNextHopVrf DisplayString
|
|
}
|
|
|
|
|
|
rcIsisLogicalInterfaceId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index used to uniquely identify this logical interface."
|
|
::= { rcIsisLogicalInterfaceEntry 1 }
|
|
|
|
rcIsisLogicalInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The ISIS logical ifIndex"
|
|
::= { rcIsisLogicalInterfaceEntry 2 }
|
|
|
|
rcIsisLogicalInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
layer2(1),
|
|
ip(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " Indicates the entry is for Layer2 or Layer3"
|
|
::= { rcIsisLogicalInterfaceEntry 3 }
|
|
|
|
rcIsisLogicalInterfaceDestIPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The logical interface Destination IP address"
|
|
::= { rcIsisLogicalInterfaceEntry 4 }
|
|
|
|
rcIsisLogicalInterfaceDestIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface to which this
|
|
logical interface corresponds. It can be port/mlt ifindex."
|
|
::= { rcIsisLogicalInterfaceEntry 5 }
|
|
|
|
rcIsisLogicalInterfaceVids OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(512))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This bitfield is used to identify which VLANs this
|
|
logical interface is associated with. Each VLAN ID
|
|
is stored as a bit. The most-significant (left-most)
|
|
bit represents Vlan Id 1."
|
|
::= { rcIsisLogicalInterfaceEntry 6 }
|
|
|
|
rcIsisLogicalInterfacePrimaryVid OBJECT-TYPE
|
|
SYNTAX Integer32 (2..4059)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Primary tunnel vlan associated with L2Core ISIS logical interface"
|
|
::= { rcIsisLogicalInterfaceEntry 7 }
|
|
|
|
rcIsisLogicalInterfaceName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "An administratively-assigned name for this Logical interface."
|
|
::= { rcIsisLogicalInterfaceEntry 8 }
|
|
|
|
rcIsisLogicalInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete logical interface"
|
|
::= { rcIsisLogicalInterfaceEntry 9}
|
|
|
|
rcIsisLogicalInterfaceCircIndex OBJECT-TYPE
|
|
SYNTAX IndexInteger
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index used to identify ISIS circuit creating under the logical interface"
|
|
::= { rcIsisLogicalInterfaceEntry 10 }
|
|
|
|
rcIsisLogicalInterfaceNextHopIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Next hop destination ifindex to reach logical tunnel dest-ip
|
|
It is deprecated by rcIsisLogicalInterfaceNextHopDestIfIndex"
|
|
::= { rcIsisLogicalInterfaceEntry 11 }
|
|
|
|
rcIsisLogicalInterfaceNextHopVid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Next hop vlan id to reach logical tunnel dest-ip
|
|
It is deprecated by rcIsisLogicalInterfaceNextHopDestVid"
|
|
::= { rcIsisLogicalInterfaceEntry 12 }
|
|
|
|
rcIsisLogicalInterfaceNextHopVrf OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop vrf name to reach logical tunnel dest-ip"
|
|
::= { rcIsisLogicalInterfaceEntry 13 }
|
|
|
|
rcIsisSpbmMcastFibUniTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisSpbmMcastFibUniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IS-IS SPBM Multicast FIB Uni Table"
|
|
::= { rcIsis 27 }
|
|
|
|
rcIsisSpbmMcastFibUniEntry OBJECT-TYPE
|
|
SYNTAX RcIsisSpbmMcastFibUniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " IS-IS SPBM Multicast FIB Uni Entry"
|
|
INDEX { rcIsisSpbmMcastFibUniSysId,
|
|
rcIsisSpbmMcastFibUniVlan,
|
|
rcIsisSpbmMcastFibUniMcastDestMacAddr,
|
|
rcIsisSpbmMcastFibUniCvid
|
|
}
|
|
::= { rcIsisSpbmMcastFibUniTable 1 }
|
|
|
|
RcIsisSpbmMcastFibUniEntry ::=
|
|
SEQUENCE {
|
|
rcIsisSpbmMcastFibUniSysId OCTET STRING,
|
|
rcIsisSpbmMcastFibUniVlan Integer32,
|
|
rcIsisSpbmMcastFibUniMcastDestMacAddr MacAddress,
|
|
rcIsisSpbmMcastFibUniCvid Integer32,
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceNniPorts PortSet,
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceNniMlts OCTET STRING,
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceSwUniPorts PortSet,
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceSwUniMlts OCTET STRING,
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniPorts PortSet,
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniMlts OCTET STRING,
|
|
rcIsisSpbmMcastFibUniCvlan Integer32
|
|
}
|
|
|
|
rcIsisSpbmMcastFibUniSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "System ID of the node where multicast FIB entry
|
|
come from."
|
|
::= { rcIsisSpbmMcastFibUniEntry 1 }
|
|
|
|
rcIsisSpbmMcastFibUniVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "bVlan of the multicast FIB entry."
|
|
::= { rcIsisSpbmMcastFibUniEntry 2 }
|
|
|
|
rcIsisSpbmMcastFibUniMcastDestMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Multicast destination Mac Address of the
|
|
multicast FIB entry. "
|
|
::= { rcIsisSpbmMcastFibUniEntry 3 }
|
|
|
|
rcIsisSpbmMcastFibUniCvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Customer vid of the multicast FIB entry.
|
|
4095 is not used. 4096 is reserved for untagged case."
|
|
::= { rcIsisSpbmMcastFibUniEntry 4 }
|
|
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceNniPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "nni port Outgoing interface of multicast fib entry.
|
|
Each bit corresponds to a port, as represented by its ifIndex value .
|
|
When a bit has the value one(1), the corresponding port is a member of
|
|
the set. When a bit has the value zero(0), the corresponding port is
|
|
not a member of the set. The encoding is such that the most significant
|
|
bit of octet #1 corresponds to ifIndex 0."
|
|
::= { rcIsisSpbmMcastFibUniEntry 5 }
|
|
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceNniMlts OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "nni mlt outgoing interface of multicast fib entry.
|
|
A set of bits represents the MLT IDs.From left to right, the
|
|
first bit set represent MltId 1. The second bit set represent
|
|
MltId 2, and so on so forth, Up to bit 511 which represents
|
|
Mlt Id 512."
|
|
::= { rcIsisSpbmMcastFibUniEntry 6 }
|
|
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceSwUniPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "switched uni port Outgoing interface of multicast fib entry.
|
|
Each bit corresponds to a port, as represented by its ifIndex value .
|
|
When a bit has the value one(1), the corresponding port is a member of
|
|
the set. When a bit has the value zero(0), the corresponding port is
|
|
not a member of the set. The encoding is such that the most significant
|
|
bit of octet #1 corresponds to ifIndex 0."
|
|
::= { rcIsisSpbmMcastFibUniEntry 7 }
|
|
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceSwUniMlts OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "switched uni mlt outgoing interface of multicast fib entry.
|
|
A set of bits represents the MLT IDs.From left to right, the
|
|
first bit set represent MltId 1. The second bit set represent
|
|
MltId 2, and so on so forth, Up to bit 511 which represents
|
|
Mlt Id 512."
|
|
::= { rcIsisSpbmMcastFibUniEntry 8 }
|
|
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniPorts OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "platform cvlan uni port Outgoing interface of multicast fib
|
|
entry. Each bit corresponds to a port, as represented by its ifIndex value .
|
|
When a bit has the value one(1), the corresponding port is a member of
|
|
the set. When a bit has the value zero(0), the corresponding port is
|
|
not a member of the set. The encoding is such that the most significant
|
|
bit of octet #1 corresponds to ifIndex 0."
|
|
::= { rcIsisSpbmMcastFibUniEntry 9 }
|
|
|
|
rcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniMlts OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "platform cvlan uni mlt outgoing interface of multicast fib
|
|
entry. A set of bits represents the MLT IDs.From left to right, the
|
|
first bit set represent MltId 1. The second bit set represent
|
|
MltId 2, and so on so forth, Up to bit 511 which represents
|
|
Mlt Id 512."
|
|
::= { rcIsisSpbmMcastFibUniEntry 10 }
|
|
|
|
rcIsisSpbmMcastFibUniCvlan OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4084)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "platform customer vlan of the multicast FIB entry."
|
|
::= { rcIsisSpbmMcastFibUniEntry 11 }
|
|
|
|
rcIsisLogicalInterfaceNextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsisLogicalInterfaceNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table to store nexthop information for the logical-interface tunnel"
|
|
::= { rcIsis 28 }
|
|
|
|
rcIsisLogicalInterfaceNextHopEntry OBJECT-TYPE
|
|
SYNTAX RcIsisLogicalInterfaceNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry contains the nexthop information for the logical interface tunnel"
|
|
INDEX { rcIsisLogicalInterfaceNextHopId,
|
|
rcIsisLogicalInterfaceNextHopIp
|
|
}
|
|
::= { rcIsisLogicalInterfaceNextHopTable 1 }
|
|
|
|
RcIsisLogicalInterfaceNextHopEntry ::= SEQUENCE {
|
|
rcIsisLogicalInterfaceNextHopId Integer32,
|
|
rcIsisLogicalInterfaceNextHopIp IpAddress,
|
|
rcIsisLogicalInterfaceNextHopDestIfIndex InterfaceIndex,
|
|
rcIsisLogicalInterfaceNextHopDestVid Integer32
|
|
}
|
|
|
|
rcIsisLogicalInterfaceNextHopId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index used to uniquely identify the
|
|
logical interface tunnel.This value is
|
|
same as the rcIsisLogicalInterfaceId in
|
|
the rcIsisLogicalInterfaceTable"
|
|
::= { rcIsisLogicalInterfaceNextHopEntry 1 }
|
|
rcIsisLogicalInterfaceNextHopIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index that uniquely identifies the next hop
|
|
IP address of the logical interface tunnel"
|
|
::= { rcIsisLogicalInterfaceNextHopEntry 2}
|
|
|
|
rcIsisLogicalInterfaceNextHopDestIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop destination ifindex to reach the next hop ip of logical interface tunnel"
|
|
::= { rcIsisLogicalInterfaceNextHopEntry 3 }
|
|
|
|
rcIsisLogicalInterfaceNextHopDestVid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop destination vlan id to reach the next hop ip of logical interface tunnel"
|
|
::= { rcIsisLogicalInterfaceNextHopEntry 4}
|
|
|
|
rcPlsbGlobal OBJECT IDENTIFIER ::= {rcPlsb 1}
|
|
|
|
rcPlsbGlobalVlans OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(512))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PLSB vlan entry."
|
|
::= { rcPlsbGlobal 1}
|
|
|
|
rcPlsbGlobalEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable PLSB global flag."
|
|
DEFVAL {disable}
|
|
::= { rcPlsbGlobal 2}
|
|
|
|
rcPlsbGlobalMsti OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MSTI instance ID for PLSB VLANS"
|
|
DEFVAL { 0 }
|
|
::= { rcPlsbGlobal 3}
|
|
|
|
rcPlsbGlobalEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "SPBM Ethertype"
|
|
DEFVAL { '8100'h }
|
|
::= { rcPlsbGlobal 4}
|
|
|
|
-- CFM Tables
|
|
-- Maintenance Domain Table
|
|
|
|
rcCfmMaintenanceDomainTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmMaintenanceDomainEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance Domain table"
|
|
::= { rcCfm 1}
|
|
|
|
rcCfmMaintenanceDomainEntry OBJECT-TYPE
|
|
SYNTAX RcCfmMaintenanceDomainEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance Domain entry."
|
|
INDEX {rcCfmMaintenanceDomainIndex }
|
|
::= { rcCfmMaintenanceDomainTable 1}
|
|
|
|
RcCfmMaintenanceDomainEntry ::=
|
|
SEQUENCE {
|
|
rcCfmMaintenanceDomainIndex Integer32,
|
|
rcCfmMaintenanceDomainName DisplayString,
|
|
rcCfmMaintenanceDomainRowStatus RowStatus,
|
|
rcCfmMaintenanceDomainNumOfMa Integer32,
|
|
rcCfmMaintenanceDomainClearStats TruthValue,
|
|
rcCfmMaintenanceDomainLevel Integer32,
|
|
rcCfmMaintenanceDomainNumOfMip Integer32,
|
|
rcCfmMaintenanceDomainType INTEGER,
|
|
rcCfmMaintenanceDomainEventTrapEnable EnableValue,
|
|
rcCfmMaintenanceDomainPmEnable EnableValue,
|
|
rcCfmMaintenanceDomainClearAisStats TruthValue
|
|
}
|
|
|
|
rcCfmMaintenanceDomainIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain index"
|
|
::= { rcCfmMaintenanceDomainEntry 1}
|
|
|
|
rcCfmMaintenanceDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmMaintenanceDomainEntry 2}
|
|
|
|
rcCfmMaintenanceDomainRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmMaintenanceDomainEntry 3}
|
|
|
|
rcCfmMaintenanceDomainNumOfMa OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of MAs belong
|
|
to this maintenance domain"
|
|
::= { rcCfmMaintenanceDomainEntry 4 }
|
|
|
|
rcCfmMaintenanceDomainClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To clear the MEPS CCM sending/receiving
|
|
message counter un der this domain"
|
|
DEFVAL { false }
|
|
::= { rcCfmMaintenanceDomainEntry 5 }
|
|
|
|
rcCfmMaintenanceDomainLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To set the maintenance level in this domain"
|
|
DEFVAL {4}
|
|
::= { rcCfmMaintenanceDomainEntry 6 }
|
|
|
|
rcCfmMaintenanceDomainNumOfMip OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of Mips belong
|
|
to this maintenance domain"
|
|
::= { rcCfmMaintenanceDomainEntry 7 }
|
|
|
|
rcCfmMaintenanceDomainType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
trunk(1),
|
|
sg(2),
|
|
endpt(3),
|
|
vlan(4),
|
|
port(5),
|
|
mimencapvlan(6),
|
|
nodal(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "To indicate the type of domain"
|
|
::= { rcCfmMaintenanceDomainEntry 8 }
|
|
|
|
rcCfmMaintenanceDomainEventTrapEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Event Trap enable"
|
|
REFERENCE "MERS v4.2 PRD - R15"
|
|
DEFVAL {enable}
|
|
::= { rcCfmMaintenanceDomainEntry 9 }
|
|
|
|
rcCfmMaintenanceDomainPmEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Performance monitor enable"
|
|
REFERENCE "MERS v4.2 PRD"
|
|
DEFVAL {disable}
|
|
::= { rcCfmMaintenanceDomainEntry 10 }
|
|
|
|
rcCfmMaintenanceDomainClearAisStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To clear the AIS CCM sending/receiving
|
|
message counter un der this domain"
|
|
DEFVAL { false }
|
|
::= { rcCfmMaintenanceDomainEntry 11 }
|
|
|
|
-- Maintenance Association Table
|
|
|
|
rcCfmMaintenanceAssociationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmMaintenanceAssociationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance Association table"
|
|
::= { rcCfm 2}
|
|
|
|
rcCfmMaintenanceAssociationEntry OBJECT-TYPE
|
|
SYNTAX RcCfmMaintenanceAssociationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance Association entry."
|
|
INDEX {rcCfmMaintenanceAssociationDomainIndex, rcCfmMaintenanceAssociationAssociationIndex }
|
|
::= { rcCfmMaintenanceAssociationTable 1}
|
|
|
|
RcCfmMaintenanceAssociationEntry ::=
|
|
SEQUENCE {
|
|
rcCfmMaintenanceAssociationDomainIndex INTEGER,
|
|
rcCfmMaintenanceAssociationAssociationIndex INTEGER,
|
|
rcCfmMaintenanceAssociationDomainName DisplayString,
|
|
rcCfmMaintenanceAssociationAssociationName DisplayString,
|
|
rcCfmMaintenanceAssociationAdminState EnableValue,
|
|
rcCfmMaintenanceAssociationRowStatus RowStatus,
|
|
rcCfmMaintenanceAssociationCcmInterval Integer32,
|
|
rcCfmMaintenanceAssociationCcmLifetime Integer32,
|
|
rcCfmMaintenanceAssociationCcmPriority Integer32,
|
|
rcCfmMaintenanceAssociationCcmTxEnable EnableValue,
|
|
rcCfmMaintenanceAssociationCcmRxEnable EnableValue,
|
|
rcCfmMaintenanceAssociationNumOfMep Integer32,
|
|
rcCfmMaintenanceAssociationClearStats TruthValue,
|
|
rcCfmMaintenanceAssociationAutoDetect EnableValue,
|
|
rcCfmMaintenanceAssociationNumOfRemoteMep Integer32,
|
|
rcCfmMaintenanceAssociationRemoveAutoRmep Integer32,
|
|
rcCfmMaintenanceAssociationCcmRdiEnable EnableValue,
|
|
rcCfmMaintenanceAssociationCcmMulticast EnableValue,
|
|
rcCfmMaintenanceAssociationEventTrapEnable EnableValue,
|
|
rcCfmMaintenanceAssociationPmEnable EnableValue,
|
|
rcCfmMaintenanceAssociationClearAisStats TruthValue
|
|
}
|
|
|
|
rcCfmMaintenanceAssociationDomainIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Domain Index"
|
|
::= { rcCfmMaintenanceAssociationEntry 1}
|
|
|
|
rcCfmMaintenanceAssociationAssociationIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Index"
|
|
::= { rcCfmMaintenanceAssociationEntry 2}
|
|
|
|
rcCfmMaintenanceAssociationDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Domain Name"
|
|
::= { rcCfmMaintenanceAssociationEntry 3}
|
|
|
|
rcCfmMaintenanceAssociationAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmMaintenanceAssociationEntry 4}
|
|
|
|
rcCfmMaintenanceAssociationAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Administratively enable or disable a maintenance association."
|
|
DEFVAL { disable }
|
|
::= { rcCfmMaintenanceAssociationEntry 5}
|
|
|
|
rcCfmMaintenanceAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmMaintenanceAssociationEntry 6}
|
|
|
|
rcCfmMaintenanceAssociationCcmInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Interval of periodic Continuity Check Message to be transmitted"
|
|
DEFVAL { 5000 }
|
|
::= { rcCfmMaintenanceAssociationEntry 7}
|
|
|
|
rcCfmMaintenanceAssociationCcmLifetime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..655350)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Lifetime of periodic Continuity Check Message"
|
|
DEFVAL { 15000 }
|
|
::= { rcCfmMaintenanceAssociationEntry 8}
|
|
|
|
rcCfmMaintenanceAssociationCcmPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Priority of Continuity Check Message to be transmitted"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmMaintenanceAssociationEntry 9}
|
|
|
|
rcCfmMaintenanceAssociationCcmTxEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Continuity Check Message transmit enable"
|
|
DEFVAL { disable }
|
|
::= { rcCfmMaintenanceAssociationEntry 10}
|
|
|
|
rcCfmMaintenanceAssociationCcmRxEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Continuity Check Message receive enable"
|
|
DEFVAL { disable }
|
|
::= { rcCfmMaintenanceAssociationEntry 11}
|
|
|
|
rcCfmMaintenanceAssociationNumOfMep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of MEPs belong
|
|
to this maintenance association"
|
|
::= { rcCfmMaintenanceAssociationEntry 12 }
|
|
|
|
rcCfmMaintenanceAssociationClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To clear the MEPs CCM sending/receiving
|
|
message counter under this MA"
|
|
DEFVAL { false }
|
|
::= { rcCfmMaintenanceAssociationEntry 13 }
|
|
|
|
rcCfmMaintenanceAssociationAutoDetect OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether MA allows auto-detect of remote MEPs"
|
|
DEFVAL { disable }
|
|
::= { rcCfmMaintenanceAssociationEntry 14 }
|
|
|
|
rcCfmMaintenanceAssociationNumOfRemoteMep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the number of remote MEPs belong
|
|
to this maintenance association"
|
|
::= { rcCfmMaintenanceAssociationEntry 15 }
|
|
|
|
rcCfmMaintenanceAssociationRemoveAutoRmep OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8191)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Remove auto learned Remote Maintenance
|
|
Endpoint ID, or 0 for unspecified"
|
|
::= { rcCfmMaintenanceAssociationEntry 16 }
|
|
|
|
rcCfmMaintenanceAssociationCcmRdiEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Continuity Check Message RDI enable"
|
|
REFERENCE "MERS v4.2 PRD - R21,R24,R29,R33,R61,R73"
|
|
DEFVAL {enable}
|
|
::= { rcCfmMaintenanceAssociationEntry 17 }
|
|
|
|
rcCfmMaintenanceAssociationCcmMulticast OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether MA sends Multicast or Unicast CCMs"
|
|
DEFVAL { enable }
|
|
::= { rcCfmMaintenanceAssociationEntry 18 }
|
|
|
|
rcCfmMaintenanceAssociationEventTrapEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Event Trap enable
|
|
This MA level setting overrides MD level setting."
|
|
REFERENCE "MERS v4.2 PRD - R15"
|
|
DEFVAL {enable}
|
|
::= { rcCfmMaintenanceAssociationEntry 19 }
|
|
|
|
rcCfmMaintenanceAssociationPmEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Performance monitor enable
|
|
This MA level setting overrides MD level setting."
|
|
REFERENCE "MERS v4.2 PRD"
|
|
DEFVAL {disable}
|
|
::= { rcCfmMaintenanceAssociationEntry 20 }
|
|
|
|
rcCfmMaintenanceAssociationClearAisStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To clear the Ais CCM sending/receiving
|
|
message counter under this MA"
|
|
DEFVAL { false }
|
|
::= { rcCfmMaintenanceAssociationEntry 21 }
|
|
|
|
|
|
-- Maintenance EndPoint Table
|
|
|
|
rcCfmMaintenanceEndPointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmMaintenanceEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance Association table"
|
|
::= { rcCfm 3}
|
|
|
|
rcCfmMaintenanceEndPointEntry OBJECT-TYPE
|
|
SYNTAX RcCfmMaintenanceEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance EndPoint entry."
|
|
INDEX {rcCfmMaintenanceEndPointDomainIndex, rcCfmMaintenanceEndPointAssociationIndex, rcCfmMaintenanceEndPointId }
|
|
::= { rcCfmMaintenanceEndPointTable 1}
|
|
|
|
RcCfmMaintenanceEndPointEntry ::=
|
|
SEQUENCE {
|
|
rcCfmMaintenanceEndPointDomainIndex Integer32,
|
|
rcCfmMaintenanceEndPointAssociationIndex Integer32,
|
|
rcCfmMaintenanceEndPointId Integer32,
|
|
rcCfmMaintenanceEndPointDomainName DisplayString,
|
|
rcCfmMaintenanceEndPointAssociationName DisplayString,
|
|
rcCfmMaintenanceEndPointAdminState EnableValue,
|
|
rcCfmMaintenanceEndPointRowStatus RowStatus,
|
|
rcCfmMaintenanceEndPointCcmPriority Integer32,
|
|
rcCfmMaintenanceEndPointCcmTxEnable EnableValue,
|
|
rcCfmMaintenanceEndPointCcmRxEnable EnableValue,
|
|
rcCfmMaintenanceEndPointMepType INTEGER,
|
|
rcCfmMaintenanceEndPointClearStats TruthValue,
|
|
rcCfmMaintenanceEndPointServiceDescription DisplayString,
|
|
rcCfmMaintenanceEndPointRemoveAutoRmep Integer32,
|
|
rcCfmMaintenanceEndPointMepStatus INTEGER,
|
|
rcCfmMaintenanceEndPointAisTxEnable EnableValue,
|
|
rcCfmMaintenanceEndPointAisInterval INTEGER,
|
|
rcCfmMaintenanceEndPointIfTlv EnableValue,
|
|
rcCfmMaintenanceEndPointMepDirection INTEGER,
|
|
rcCfmMaintenanceEndPointClearAisStats TruthValue,
|
|
rcCfmMaintenanceEndPointIfIndex InterfaceIndexOrZero,
|
|
rcCfmMaintenanceEndPointCcmVlanId RcVlanIdOrNone,
|
|
rcCfmMaintenanceEndPointLabel DisplayString
|
|
}
|
|
|
|
rcCfmMaintenanceEndPointDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmMaintenanceEndPointEntry 1}
|
|
|
|
rcCfmMaintenanceEndPointAssociationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmMaintenanceEndPointEntry 2}
|
|
|
|
rcCfmMaintenanceEndPointId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmMaintenanceEndPointEntry 3}
|
|
|
|
rcCfmMaintenanceEndPointDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmMaintenanceEndPointEntry 4}
|
|
|
|
rcCfmMaintenanceEndPointAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmMaintenanceEndPointEntry 5}
|
|
|
|
rcCfmMaintenanceEndPointAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Administratively enable or disable a maintenance EndPoint."
|
|
DEFVAL { disable }
|
|
::= { rcCfmMaintenanceEndPointEntry 6}
|
|
|
|
rcCfmMaintenanceEndPointRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmMaintenanceEndPointEntry 7}
|
|
|
|
rcCfmMaintenanceEndPointCcmPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Priority of Continuity Check Message to be transmitted"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmMaintenanceEndPointEntry 8}
|
|
|
|
rcCfmMaintenanceEndPointCcmTxEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Continuity Check Message transmit enable"
|
|
DEFVAL { disable }
|
|
::= { rcCfmMaintenanceEndPointEntry 9}
|
|
|
|
rcCfmMaintenanceEndPointCcmRxEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Continuity Check Message receive enable"
|
|
DEFVAL { disable }
|
|
::= { rcCfmMaintenanceEndPointEntry 10}
|
|
|
|
rcCfmMaintenanceEndPointMepType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
trunk(1),
|
|
sg(2),
|
|
endpt(4),
|
|
unused(8),
|
|
vlan(16),
|
|
port(32),
|
|
endptClient(64),
|
|
remotetrunk(32769),
|
|
remotesg(32770),
|
|
remoteendpt(32772),
|
|
remoteVlan(32784),
|
|
remotePort(32800),
|
|
remoteEndptClient(32832),
|
|
nodal(3145728)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mep Type"
|
|
::= { rcCfmMaintenanceEndPointEntry 11 }
|
|
|
|
rcCfmMaintenanceEndPointClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To clear the MEP CCM sending/receiving
|
|
message counter"
|
|
DEFVAL { false }
|
|
::= { rcCfmMaintenanceEndPointEntry 12 }
|
|
|
|
rcCfmMaintenanceEndPointServiceDescription OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..48))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to specify what service this mep assigned to"
|
|
::= { rcCfmMaintenanceEndPointEntry 13}
|
|
|
|
rcCfmMaintenanceEndPointRemoveAutoRmep OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8191)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Remove auto learned Remote Maintenance
|
|
Endpoint ID, or 0 for unspecified"
|
|
::= { rcCfmMaintenanceEndPointEntry 14 }
|
|
|
|
rcCfmMaintenanceEndPointMepStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
inactive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicating if the mep status is active or inactive.
|
|
Only Dual-Home Ring endpoint client meps can have
|
|
active/inactive status. All other mep types have
|
|
active status."
|
|
::= { rcCfmMaintenanceEndPointEntry 15 }
|
|
|
|
rcCfmMaintenanceEndPointAisTxEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Alarm Indication Signal Message transmit enable"
|
|
DEFVAL { disable }
|
|
::= { rcCfmMaintenanceEndPointEntry 16}
|
|
|
|
rcCfmMaintenanceEndPointAisInterval OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
intv1000(1000),
|
|
intv60000(60000)
|
|
}
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Interval of periodic Alarm Indication Signal Message to be transmitted. Unit in milliseconds."
|
|
DEFVAL { intv60000 }
|
|
::= { rcCfmMaintenanceEndPointEntry 17}
|
|
|
|
rcCfmMaintenanceEndPointIfTlv OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Admin control of the Interface-Status-Tlv in
|
|
maintenanceEndpoint."
|
|
DEFVAL { disable }
|
|
::= { rcCfmMaintenanceEndPointEntry 18 }
|
|
|
|
rcCfmMaintenanceEndPointMepDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
unknown(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the direction in which the Maintenance association faces on the bridge port."
|
|
DEFVAL { unknown }
|
|
::= { rcCfmMaintenanceEndPointEntry 19 }
|
|
|
|
rcCfmMaintenanceEndPointClearAisStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To clear the AIS sending/receiving
|
|
message counter"
|
|
DEFVAL { false }
|
|
::= { rcCfmMaintenanceEndPointEntry 20 }
|
|
|
|
rcCfmMaintenanceEndPointIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the interface index of the interface either a
|
|
bridge port, or an aggregated IEEE 802.1 link within a bridge port,
|
|
to which the MEP is attached."
|
|
DEFVAL { 0 }
|
|
::= { rcCfmMaintenanceEndPointEntry 21 }
|
|
|
|
rcCfmMaintenanceEndPointCcmVlanId OBJECT-TYPE
|
|
SYNTAX RcVlanIdOrNone
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Customer CCM VLAN ID"
|
|
DEFVAL { 1 }
|
|
::= { rcCfmMaintenanceEndPointEntry 22 }
|
|
|
|
rcCfmMaintenanceEndPointLabel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..48))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User provided field. Used to give extra management
|
|
information/data."
|
|
::= { rcCfmMaintenanceEndPointEntry 23 }
|
|
|
|
|
|
-- Trunk Group Table
|
|
|
|
rcCfmTrunkGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmTrunkGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault TrunkGroup table"
|
|
::= { rcCfm 4}
|
|
|
|
rcCfmTrunkGroupEntry OBJECT-TYPE
|
|
SYNTAX RcCfmTrunkGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management TrunkGroup entry."
|
|
INDEX {rcCfmTrunkGroupName}
|
|
::= { rcCfmTrunkGroupTable 1}
|
|
|
|
RcCfmTrunkGroupEntry ::=
|
|
SEQUENCE {
|
|
rcCfmTrunkGroupName CfmNameString,
|
|
rcCfmTrunkGroupRowStatus RowStatus,
|
|
rcCfmTrunkGroupPrimaryTrunk DisplayString,
|
|
rcCfmTrunkGroupSecondaryTrunk DisplayString,
|
|
rcCfmTrunkGroupActiveTrunk DisplayString,
|
|
rcCfmTrunkGroupRevertive EnableValue,
|
|
rcCfmTrunkGroupLoopBackVlanId Integer32,
|
|
rcCfmTrunkGroupUserLabel1 OCTET STRING,
|
|
rcCfmTrunkGroupUserLabel2 OCTET STRING
|
|
|
|
}
|
|
|
|
rcCfmTrunkGroupName OBJECT-TYPE
|
|
SYNTAX CfmNameString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Trunk Group Name"
|
|
::= { rcCfmTrunkGroupEntry 1}
|
|
|
|
rcCfmTrunkGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmTrunkGroupEntry 2}
|
|
|
|
rcCfmTrunkGroupPrimaryTrunk OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Trunk Group PBT Primary Trunk Name"
|
|
::= { rcCfmTrunkGroupEntry 3}
|
|
|
|
rcCfmTrunkGroupSecondaryTrunk OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Trunk Group PBT Secondary Trunk Name"
|
|
::= { rcCfmTrunkGroupEntry 4}
|
|
|
|
rcCfmTrunkGroupActiveTrunk OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Trunk Group PBT Active Trunk Name"
|
|
::= { rcCfmTrunkGroupEntry 5}
|
|
|
|
rcCfmTrunkGroupRevertive OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Revertive enable or disable"
|
|
DEFVAL { disable }
|
|
::= { rcCfmTrunkGroupEntry 6}
|
|
|
|
rcCfmTrunkGroupLoopBackVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Loopback VLAN ID for local pbt switching"
|
|
::= { rcCfmTrunkGroupEntry 7}
|
|
|
|
rcCfmTrunkGroupUserLabel1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..89))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User provided field. Used to give extra management information/data "
|
|
::= { rcCfmTrunkGroupEntry 8 }
|
|
|
|
rcCfmTrunkGroupUserLabel2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..89))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User provided additional field. Used to give extra management information/data "
|
|
::= { rcCfmTrunkGroupEntry 9}
|
|
|
|
|
|
-- Trunk Table
|
|
|
|
rcCfmTrunkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmTrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Trunk table"
|
|
::= { rcCfm 5}
|
|
|
|
rcCfmTrunkEntry OBJECT-TYPE
|
|
SYNTAX RcCfmTrunkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Trunk entry."
|
|
INDEX {rcCfmTrunkName}
|
|
::= { rcCfmTrunkTable 1}
|
|
|
|
RcCfmTrunkEntry ::=
|
|
SEQUENCE {
|
|
rcCfmTrunkName CfmNameString,
|
|
rcCfmTrunkPort InterfaceIndex,
|
|
rcCfmTrunkAdminState EnableValue,
|
|
rcCfmTrunkRowStatus RowStatus,
|
|
rcCfmTrunkMac MacAddress,
|
|
rcCfmTrunkMdName DisplayString,
|
|
rcCfmTrunkMaName DisplayString,
|
|
rcCfmTrunkVlanId Integer32,
|
|
rcCfmTrunkReverseVlanId Integer32,
|
|
rcCfmTrunkMepId Integer32,
|
|
rcCfmTrunkHoldTimer Integer32,
|
|
rcCfmTrunkOperStatus INTEGER,
|
|
rcCfmTrunkSourceMac MacAddress,
|
|
rcCfmTrunkClearStats TruthValue,
|
|
rcCfmTrunkUserLabel1 OCTET STRING ,
|
|
rcCfmTrunkUserLabel2 OCTET STRING ,
|
|
rcCfmTrunkSubportQueueSet Integer32,
|
|
rcCfmTrunkDualHomePartner EnableValue
|
|
}
|
|
|
|
|
|
rcCfmTrunkName OBJECT-TYPE
|
|
SYNTAX CfmNameString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Name"
|
|
::= { rcCfmTrunkEntry 1}
|
|
|
|
rcCfmTrunkPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Port"
|
|
::= { rcCfmTrunkEntry 2}
|
|
|
|
rcCfmTrunkAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Administratively enable or disable a PBT trunk."
|
|
DEFVAL { disable }
|
|
::= { rcCfmTrunkEntry 3}
|
|
|
|
rcCfmTrunkRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmTrunkEntry 4}
|
|
|
|
rcCfmTrunkMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Trunk Mac (remote CP mac)"
|
|
::= { rcCfmTrunkEntry 5}
|
|
|
|
rcCfmTrunkMdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Maintenance Domain Name"
|
|
::= { rcCfmTrunkEntry 6}
|
|
|
|
rcCfmTrunkMaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Maintenance Association Name"
|
|
::= { rcCfmTrunkEntry 7}
|
|
|
|
rcCfmTrunkVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT trunk VLAN ID"
|
|
::= { rcCfmTrunkEntry 8}
|
|
|
|
rcCfmTrunkReverseVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT trunk reverse VLAN ID"
|
|
::= { rcCfmTrunkEntry 9}
|
|
|
|
rcCfmTrunkMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8191)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT trunk MEP ID. Range 1-8191 is a valid Mep ID to
|
|
be assigned to the CFM Trunk. '0' means unassign the
|
|
Med ID from the CFM Trunk"
|
|
::= { rcCfmTrunkEntry 10}
|
|
|
|
rcCfmTrunkHoldTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Trunk hold timer value."
|
|
::= { rcCfmTrunkEntry 11 }
|
|
|
|
rcCfmTrunkOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
waiting(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational status of this trunk."
|
|
DEFVAL { down }
|
|
::= { rcCfmTrunkEntry 12 }
|
|
|
|
rcCfmTrunkSourceMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Trunk Source Mac (local switch PBT mac)"
|
|
::= { rcCfmTrunkEntry 13}
|
|
rcCfmTrunkClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Action to clear the stats for all trunks"
|
|
DEFVAL { false }
|
|
::= { rcCfmTrunkEntry 14}
|
|
|
|
|
|
rcCfmTrunkUserLabel1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..89))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User provided field. Used to give extra management information/data "
|
|
::= { rcCfmTrunkEntry 15 }
|
|
|
|
rcCfmTrunkUserLabel2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..89))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "User provided additional field. Used to give extra management information/data "
|
|
::= { rcCfmTrunkEntry 16 }
|
|
|
|
rcCfmTrunkSubportQueueSet OBJECT-TYPE
|
|
SYNTAX Integer32 (1..80)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Subport Queue Set Index Number"
|
|
DEFVAL { 1 }
|
|
::= { rcCfmTrunkEntry 17}
|
|
|
|
rcCfmTrunkDualHomePartner OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable PBT trunk as Dual Home Partner"
|
|
DEFVAL { disable }
|
|
::= { rcCfmTrunkEntry 18}
|
|
|
|
-- Service Group Table
|
|
|
|
rcCfmServiceGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmServiceGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Service Group table"
|
|
::= { rcCfm 6}
|
|
|
|
rcCfmServiceGroupEntry OBJECT-TYPE
|
|
SYNTAX RcCfmServiceGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management ServiceGroup entry."
|
|
INDEX {rcCfmServiceGroupName}
|
|
::= { rcCfmServiceGroupTable 1}
|
|
|
|
RcCfmServiceGroupEntry ::=
|
|
SEQUENCE {
|
|
rcCfmServiceGroupName CfmNameString,
|
|
rcCfmServiceGroupPort InterfaceIndex,
|
|
rcCfmServiceGroupAdminState EnableValue,
|
|
rcCfmServiceGroupRowStatus RowStatus,
|
|
rcCfmServiceGroupMac MacAddress,
|
|
rcCfmServiceGroupMdName DisplayString,
|
|
rcCfmServiceGroupMaName DisplayString,
|
|
rcCfmServiceGroupTgName DisplayString,
|
|
rcCfmServiceGroupMepId Integer32,
|
|
rcCfmServiceGroupRingId Integer32,
|
|
rcCfmServiceGroupCcmOperStatus INTEGER
|
|
}
|
|
|
|
rcCfmServiceGroupName OBJECT-TYPE
|
|
SYNTAX CfmNameString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PBT ServiceGroup Name"
|
|
::= { rcCfmServiceGroupEntry 1}
|
|
|
|
rcCfmServiceGroupPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT ServiceGroup Port"
|
|
::= { rcCfmServiceGroupEntry 2}
|
|
|
|
rcCfmServiceGroupAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Administratively enable or disable a PBT Service Group."
|
|
DEFVAL { disable }
|
|
::= { rcCfmServiceGroupEntry 3}
|
|
|
|
rcCfmServiceGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmServiceGroupEntry 4}
|
|
|
|
rcCfmServiceGroupMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "ServiceGroup Mac (remote mac of NPU)"
|
|
::= { rcCfmServiceGroupEntry 5}
|
|
|
|
rcCfmServiceGroupMdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT ServiceGroup Maintenance Domain Name"
|
|
::= { rcCfmServiceGroupEntry 6}
|
|
|
|
rcCfmServiceGroupMaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT ServiceGroup Maintenance Association Name"
|
|
::= { rcCfmServiceGroupEntry 7}
|
|
|
|
rcCfmServiceGroupTgName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT ServiceGroup Trunk Group Name"
|
|
::= { rcCfmServiceGroupEntry 8}
|
|
|
|
rcCfmServiceGroupMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8191)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "PBT ServiceGroup MEP ID. Range 1-8191 is a valid Mep
|
|
ID to be assigned to the CFM Service group. '0' means
|
|
unassign the Med ID from the CFM service group"
|
|
::= { rcCfmServiceGroupEntry 9}
|
|
|
|
rcCfmServiceGroupRingId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..254)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Ring ID associated with Service Group"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmServiceGroupEntry 10}
|
|
|
|
rcCfmServiceGroupCcmOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current CCM operational status of this service group."
|
|
::= { rcCfmServiceGroupEntry 11 }
|
|
|
|
-- PBT Vlans Table
|
|
|
|
rcCfmPbt OBJECT IDENTIFIER ::= {rcCfm 7}
|
|
|
|
rcCfmPbtVlans OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(512))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management PBT vlan entry."
|
|
::= { rcCfmPbt 1}
|
|
|
|
rcCfmPbtMsti OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MSTI instance ID for PBT VLANS"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmPbt 2}
|
|
|
|
--- CFM Stats Table
|
|
|
|
rcCfmStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM stats table"
|
|
::= { rcCfm 8 }
|
|
|
|
rcCfmStatsEntry OBJECT-TYPE
|
|
SYNTAX RcCfmStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Stats table entry. Contain CFM Message
|
|
sending/receiving and missing counter"
|
|
INDEX { rcCfmStatsDomainIndex, rcCfmStatsAssociationIndex, rcCfmStatsMepId}
|
|
::= { rcCfmStatsTable 1 }
|
|
|
|
RcCfmStatsEntry ::=
|
|
SEQUENCE {
|
|
rcCfmStatsDomainIndex Integer32,
|
|
rcCfmStatsAssociationIndex Integer32,
|
|
rcCfmStatsDomainName DisplayString,
|
|
rcCfmStatsAssociationName DisplayString,
|
|
rcCfmStatsMepId Integer32,
|
|
rcCfmStatsTxCnt Counter64,
|
|
rcCfmStatsRxCnt Counter64,
|
|
rcCfmStatsRxZeroCnt Counter64,
|
|
rcCfmStatsMissedCnt Counter64,
|
|
rcCfmStatsUpTimeCnt Counter64,
|
|
rcCfmStatsDefect Integer32,
|
|
rcCfmStatsAisTxCnt Counter64,
|
|
rcCfmStatsAisRxCnt Counter64,
|
|
rcCfmStatsAisOperState INTEGER,
|
|
rcCfmStatsAisMipLevel Integer32,
|
|
rcCfmStatsIfTlvTx INTEGER,
|
|
rcCfmStatsAccessDrops Counter64,
|
|
rcCfmStatsAggregateUplinkDrops Counter64
|
|
}
|
|
|
|
rcCfmStatsDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmStatsEntry 1}
|
|
|
|
rcCfmStatsAssociationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmStatsEntry 2}
|
|
|
|
rcCfmStatsDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmStatsEntry 3}
|
|
|
|
rcCfmStatsAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmStatsEntry 4}
|
|
|
|
rcCfmStatsMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmStatsEntry 5}
|
|
|
|
rcCfmStatsTxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM messages are
|
|
transmitted by trunk or ESM port"
|
|
::= { rcCfmStatsEntry 6}
|
|
|
|
rcCfmStatsRxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM messages are
|
|
received by trunk or ESM port"
|
|
::= { rcCfmStatsEntry 7 }
|
|
|
|
rcCfmStatsRxZeroCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM messages are
|
|
received by trunk or ESM port"
|
|
::= { rcCfmStatsEntry 8 }
|
|
|
|
rcCfmStatsMissedCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM messages are
|
|
missing on trunk or ESM port"
|
|
::= { rcCfmStatsEntry 9 }
|
|
|
|
rcCfmStatsUpTimeCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Time of CFM messages are
|
|
UP on trunk or ESM port in milliseconds"
|
|
::= { rcCfmStatsEntry 10 }
|
|
|
|
rcCfmStatsDefect OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An enumerated value indicating the highest-priority
|
|
defect that has been present since the MEP Fault Notification
|
|
Generate State Machine was last in the FNG_RESET state, either:
|
|
1) DefRDICCM: The last CCM received by this MEP from some
|
|
remote MEP contained the RDI bit.
|
|
2) DefMACstats: The last CCM received by this MEP from
|
|
some remote MEP indicated that the transmitting MEP's
|
|
associated MAC is reporting an error status.
|
|
3) DefRemoteCCM: This MEP is not receiving CCMs from some
|
|
other MEP in its configured list.
|
|
4) DefErrorCCM: This MEP is receiving invalid CCMs.
|
|
5) DefXconCCM: This MEP is receiving CCMs that could be from some other MA.
|
|
"
|
|
::= { rcCfmStatsEntry 11 }
|
|
|
|
rcCfmStatsAisTxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of AIS messages
|
|
transmitted by Client Mep on Port/MLT"
|
|
::= { rcCfmStatsEntry 12}
|
|
|
|
rcCfmStatsAisRxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of AIS messages
|
|
received by Client Mep on Port/MLT"
|
|
::= { rcCfmStatsEntry 13}
|
|
|
|
rcCfmStatsAisOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "To indicate the operational status of AIS. It is set
|
|
to true when AIS is transmitted. It is set to false
|
|
when AIS is cleared."
|
|
::= { rcCfmStatsEntry 14}
|
|
|
|
rcCfmStatsAisMipLevel OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is Maintenance Domain Level of the MIP on which
|
|
the AIS is transmitted."
|
|
::= { rcCfmStatsEntry 15}
|
|
|
|
rcCfmStatsIfTlvTx OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
up(2),
|
|
down(3),
|
|
lowerLayerDown(4),
|
|
testing(5),
|
|
unknown(6),
|
|
dormant(7),
|
|
notpresent(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "To indicate the operational state of Interface
|
|
Status TLV transmitted on MaintenanceEndpoint.
|
|
This status indicates that the state of the local
|
|
UNI Port."
|
|
::= { rcCfmStatsEntry 16 }
|
|
|
|
rcCfmStatsAccessDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets dropped on ingress to
|
|
access port, for this MEP, due to same or lower MD level"
|
|
::= { rcCfmStatsEntry 17 }
|
|
|
|
rcCfmStatsAggregateUplinkDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of packets dropped on ingress to
|
|
uplink port, for all MEPS, due to lower MD level"
|
|
::= { rcCfmStatsEntry 18 }
|
|
|
|
-- CCM operational indication
|
|
rcCfmTrap OBJECT IDENTIFIER ::= { rcCfm 9 }
|
|
|
|
rcCfmTrunkCcmIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " A Trunk CCM indication signifies that the trunk CCM operational status
|
|
has changed state to UP or DOWN"
|
|
|
|
::= { rcCfmTrap 1 }
|
|
rcCfmServiceGroupCcmIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " A Service Group CCM indication signifies that the service group CCM
|
|
operational status has changed state to UP or DOWN"
|
|
|
|
::= { rcCfmTrap 2 }
|
|
|
|
rcCfmEndPointCcmIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " A Endpoint CCM indication signifies that the endpoint CCM
|
|
operational status has changed state to UP or DOWN"
|
|
|
|
::= { rcCfmTrap 3 }
|
|
|
|
rcCfmTrunkGroupIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
majorFailure(1),
|
|
primaryFailed(2),
|
|
secondaryFailed(3),
|
|
manualSwitched(4),
|
|
reversion(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " A Trunk group CCM indication signifies what kind of protection failure
|
|
within the trunk group"
|
|
|
|
::= { rcCfmTrap 4 }
|
|
|
|
rcCfmTrunkGroupProtected OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wasprotected(1),
|
|
wasnotprotected(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " signifies trunk group was protected or was not protected"
|
|
|
|
::= { rcCfmTrap 5 }
|
|
|
|
rcCfmRemoteMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Remote Maintenance Endpoint ID"
|
|
::= {rcCfmTrap 6}
|
|
|
|
rcCfmLocalMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Local Maintenance Endpoint ID"
|
|
::= {rcCfmTrap 7}
|
|
|
|
rcCfmMepCcmIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
up(2),
|
|
learned(3),
|
|
update(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "CCM indication signifies that the MEP CCM
|
|
operational status"
|
|
::= {rcCfmTrap 8}
|
|
|
|
rcCfmCvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Customer
|
|
Vlan Id in i-sid endpt."
|
|
::= { rcCfmTrap 9 }
|
|
|
|
rcCfmRemoteMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "remote MAC address"
|
|
::= { rcCfmTrap 10}
|
|
|
|
rcCfmIsidId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Service Instance ID of the I component"
|
|
::= { rcCfmTrap 11 }
|
|
rcCfmTrapTrunkName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Name"
|
|
::= { rcCfmTrap 12}
|
|
|
|
rcCfmPbitNum OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " p-bit value used to queue packets"
|
|
::= { rcCfmTrap 13 }
|
|
|
|
|
|
rcCfmUserLabel1 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Memo field <Data OSS port ID>"
|
|
REFERENCE "MERS v4.2 PRD"
|
|
::= { rcCfmTrap 14}
|
|
|
|
rcCfmUserLabel2 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Memo field <Sonet OSS circuit ID>"
|
|
REFERENCE "MERS v4.2 PRD"
|
|
::= { rcCfmTrap 15}
|
|
|
|
rcCfmMonitorCosPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Monitor customer traffic on COS priority"
|
|
::= {rcCfmTrap 16}
|
|
|
|
rcCfmThresholdIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
exceeded(1),
|
|
recovered(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " A threshold indication is:
|
|
alarm - when the set-threshold has been exceeded
|
|
clear - when the clear-threshold level has been
|
|
reached after an alarm condition
|
|
"
|
|
::= { rcCfmTrap 17 }
|
|
|
|
rcCfmActualPercentage OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured Percentage in 1 percent increments"
|
|
::= { rcCfmTrap 18}
|
|
|
|
rcCfmActualSubPercentage OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured Sub percentage in 1/100 percent increments"
|
|
::= { rcCfmTrap 19}
|
|
|
|
rcCfmAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Configured alarm percentage threshold"
|
|
::= { rcCfmTrap 20}
|
|
|
|
rcCfmAlarmSubThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Configured alarm sub percentage threshold"
|
|
::= { rcCfmTrap 21}
|
|
|
|
rcCfmClearThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Configured clear percentage threshold"
|
|
::= { rcCfmTrap 22}
|
|
|
|
rcCfmClearSubThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Configured clear sub percentage threshold"
|
|
::= { rcCfmTrap 23}
|
|
|
|
rcCfmFdTarget OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "frame delay target"
|
|
::= { rcCfmTrap 24}
|
|
|
|
rcCfmFdAverage OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "frame delay average"
|
|
::= { rcCfmTrap 25}
|
|
|
|
rcCfmTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time stamp."
|
|
::= { rcCfmTrap 26}
|
|
|
|
rcCfmTrapTrunkGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "trunk group name."
|
|
::= { rcCfmTrap 27}
|
|
|
|
rcCfmVid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Customer
|
|
Vlan Id in i-sid endpt."
|
|
::= { rcCfmTrap 28 }
|
|
|
|
rcCfmFdvTarget OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "frame delay variation target"
|
|
::= { rcCfmTrap 29}
|
|
|
|
rcCfmFdvAverage OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "frame delay variation average"
|
|
::= { rcCfmTrap 30}
|
|
|
|
rcCfmDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " MEP direction"
|
|
::= { rcCfmTrap 31 }
|
|
|
|
rcCfmDhuId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the
|
|
DH Uni Id in i-sid endpt."
|
|
::= { rcCfmTrap 32 }
|
|
|
|
rcCfmIftlvIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
up(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " A Iftlv indication signifies that the operational status of CCM that is
|
|
sent or received with iftlv has changed state to UP or DOWN"
|
|
|
|
::= { rcCfmTrap 33 }
|
|
|
|
rcCfmGlobals OBJECT IDENTIFIER ::= { rcCfm 10 }
|
|
|
|
rcCfmGlobalsEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'FFFF'h)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "CFM Ether Type"
|
|
DEFVAL { '8902'h }
|
|
::= { rcCfmGlobals 1 }
|
|
|
|
rcCfmGlobalsPbtMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PBT base MAC address"
|
|
::= { rcCfmGlobals 2 }
|
|
|
|
rcCfmGlobalsPortVid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "CFM default port vid, 4095 is used for untagged."
|
|
::= { rcCfmGlobals 3 }
|
|
|
|
rcCfmGlobalsPbtDropTrapTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The timer settings for traps being sent
|
|
on discard of packets with unknown
|
|
destination MAC in minutes"
|
|
DEFVAL { 900 }
|
|
::= { rcCfmGlobals 4 }
|
|
|
|
rcCfmGlobalsPmEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Performance monitor enable"
|
|
REFERENCE "MERS v4.2 PRD"
|
|
DEFVAL {enable}
|
|
::= { rcCfmGlobals 5 }
|
|
|
|
rcCfmGlobalsCcmTrapDisplayEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "CCM trap display enable"
|
|
DEFVAL {enable}
|
|
::= { rcCfmGlobals 6 }
|
|
|
|
rcCfmGlobalsPmLogEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable PM Auto Logging"
|
|
DEFVAL {disable}
|
|
::= { rcCfmGlobals 7 }
|
|
|
|
rcCfmGlobalsSpbmAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable global cfm support for SPBM VLANs"
|
|
DEFVAL { disable }
|
|
::= { rcCfmGlobals 8 }
|
|
|
|
rcCfmGlobalsSpbmLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set the global cfm maintenance level for SPBM VLANs"
|
|
DEFVAL { 4 }
|
|
::= { rcCfmGlobals 9 }
|
|
|
|
rcCfmGlobalsSpbmMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the global cfm Maintenance End Point ID value for SPBM VLANs"
|
|
DEFVAL { 1 }
|
|
::= { rcCfmGlobals 10 }
|
|
|
|
rcCfmGlobalsCmacAdminState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable global cfm support for C-VLANs"
|
|
DEFVAL { disable }
|
|
::= { rcCfmGlobals 11 }
|
|
|
|
rcCfmGlobalsCmacLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to set the global cfm maintenance level for C-VLANs"
|
|
DEFVAL { 4 }
|
|
::= { rcCfmGlobals 12 }
|
|
|
|
rcCfmGlobalsCmacMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the global cfm Maintenance End Point ID value for C-VLANs"
|
|
DEFVAL { 1 }
|
|
::= { rcCfmGlobals 13 }
|
|
|
|
rcCfmGlobalsBmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Bmac address of the node"
|
|
::= { rcCfmGlobals 14 }
|
|
|
|
rcCfmGlobalsCmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Cmac address of the node "
|
|
::= { rcCfmGlobals 15 }
|
|
|
|
|
|
-- Remote Maintenance EndPoint Table
|
|
|
|
rcCfmRemoteMepConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmRemoteMepConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Remote Maintenance Association table"
|
|
::= { rcCfm 11}
|
|
|
|
rcCfmRemoteMepConfigEntry OBJECT-TYPE
|
|
SYNTAX RcCfmRemoteMepConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Remote Maintenance EndPoint entry."
|
|
INDEX {rcCfmRemoteMepConfigDomainIndex, rcCfmRemoteMepConfigAssociationIndex, rcCfmRemoteMepConfigId }
|
|
::= { rcCfmRemoteMepConfigTable 1}
|
|
|
|
RcCfmRemoteMepConfigEntry ::=
|
|
SEQUENCE {
|
|
rcCfmRemoteMepConfigDomainIndex Integer32,
|
|
rcCfmRemoteMepConfigAssociationIndex Integer32,
|
|
rcCfmRemoteMepConfigId Integer32,
|
|
rcCfmRemoteMepConfigDomainName DisplayString,
|
|
rcCfmRemoteMepConfigAssociationName DisplayString,
|
|
rcCfmRemoteMepConfigMacAddr MacAddress,
|
|
rcCfmRemoteMepConfigRowStatus RowStatus
|
|
}
|
|
|
|
rcCfmRemoteMepConfigDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Remote Maintenance Domain Name"
|
|
::= { rcCfmRemoteMepConfigEntry 1}
|
|
|
|
rcCfmRemoteMepConfigAssociationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Remote Maintenance Association Name"
|
|
::= { rcCfmRemoteMepConfigEntry 2}
|
|
|
|
rcCfmRemoteMepConfigId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Remote Maintenance EndPoint ID"
|
|
::= { rcCfmRemoteMepConfigEntry 3}
|
|
|
|
rcCfmRemoteMepConfigDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Remote Maintenance Domain Name"
|
|
::= { rcCfmRemoteMepConfigEntry 4}
|
|
|
|
rcCfmRemoteMepConfigAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Remote Maintenance Association Name"
|
|
::= { rcCfmRemoteMepConfigEntry 5}
|
|
|
|
rcCfmRemoteMepConfigMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Mac address of remote maintenance endpoint"
|
|
::= { rcCfmRemoteMepConfigEntry 6}
|
|
|
|
rcCfmRemoteMepConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmRemoteMepConfigEntry 7}
|
|
|
|
-- Remote Mep Learn Stats
|
|
|
|
RcCfmRemoteMepState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational state of the remote MEP state machine"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.6.3 b), 20.16 and 20.17"
|
|
SYNTAX INTEGER {
|
|
rMepIdle (1),
|
|
rMepStart (2),
|
|
rMepFailed (3),
|
|
rMepOk (4)
|
|
}
|
|
|
|
RcCfmPmOperState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational state of the Performance Montitor form mep-rmep pair"
|
|
|
|
SYNTAX INTEGER {
|
|
rPmUp (1),
|
|
rPmDown (2),
|
|
rPmError (3),
|
|
rPmSync (4)
|
|
}
|
|
|
|
rcCfmRemoteMepStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmRemoteMepStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Mep Learn stats table contains the
|
|
local and remote mep Tx and Rx statistics"
|
|
::= { rcCfm 12 }
|
|
|
|
rcCfmRemoteMepStatsEntry OBJECT-TYPE
|
|
SYNTAX RcCfmRemoteMepStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Stats table entry. Contain CFM Message
|
|
sending/receiving and missing counter.
|
|
Entry indicate the CCM message still alive"
|
|
INDEX { rcCfmRemoteMepStatsDomainIndex, rcCfmRemoteMepStatsAssociationIndex, rcCfmRemoteMepStatsMepId, rcCfmRemoteMepStatsRemoteMepId}
|
|
::= { rcCfmRemoteMepStatsTable 1 }
|
|
|
|
RcCfmRemoteMepStatsEntry ::=
|
|
SEQUENCE {
|
|
rcCfmRemoteMepStatsDomainIndex Integer32,
|
|
rcCfmRemoteMepStatsAssociationIndex Integer32,
|
|
rcCfmRemoteMepStatsMepId Integer32,
|
|
rcCfmRemoteMepStatsRemoteMepId Integer32,
|
|
rcCfmRemoteMepStatsDomainName DisplayString,
|
|
rcCfmRemoteMepStatsAssociationName DisplayString,
|
|
rcCfmRemoteMepStatsLearnType INTEGER,
|
|
rcCfmRemoteMepStatsRemoteMacAddr MacAddress,
|
|
rcCfmRemoteMepStatsRxCnt Counter64,
|
|
rcCfmRemoteMepStatsSeqErrCnt Counter64,
|
|
rcCfmRemoteMepStatsOperState INTEGER,
|
|
rcCfmRemoteMepStatsClearStats TruthValue,
|
|
rcCfmRemoteMepStatsDbRdi TruthValue,
|
|
rcCfmRemoteMepStatsIfTlvRx INTEGER
|
|
}
|
|
|
|
rcCfmRemoteMepStatsDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name index"
|
|
::= { rcCfmRemoteMepStatsEntry 1}
|
|
|
|
rcCfmRemoteMepStatsAssociationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name index"
|
|
::= { rcCfmRemoteMepStatsEntry 2}
|
|
|
|
rcCfmRemoteMepStatsMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Local MEP (Maintenance EndPoint) ID"
|
|
::= { rcCfmRemoteMepStatsEntry 3}
|
|
|
|
rcCfmRemoteMepStatsRemoteMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Remote Mep Id which the local mep rx
|
|
CCM message from"
|
|
::= { rcCfmRemoteMepStatsEntry 4}
|
|
|
|
rcCfmRemoteMepStatsDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmRemoteMepStatsEntry 5}
|
|
|
|
rcCfmRemoteMepStatsAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmRemoteMepStatsEntry 6}
|
|
|
|
rcCfmRemoteMepStatsLearnType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dynamic(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicate the learning remote Mep is static
|
|
created or dynamic learn"
|
|
::= { rcCfmRemoteMepStatsEntry 7}
|
|
|
|
rcCfmRemoteMepStatsRemoteMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A remote MAC address"
|
|
::= { rcCfmRemoteMepStatsEntry 8 }
|
|
|
|
rcCfmRemoteMepStatsRxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM messages are
|
|
received by trunk or ESM port"
|
|
::= { rcCfmRemoteMepStatsEntry 9 }
|
|
|
|
rcCfmRemoteMepStatsSeqErrCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of Sequence errors"
|
|
::= { rcCfmRemoteMepStatsEntry 10}
|
|
|
|
rcCfmRemoteMepStatsOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
start(1),
|
|
up(2),
|
|
down(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "To indicate the operational state of remote
|
|
maintenance endpoint"
|
|
::= { rcCfmRemoteMepStatsEntry 11 }
|
|
|
|
rcCfmRemoteMepStatsClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To clear the CCM messages counter"
|
|
DEFVAL { false }
|
|
::= { rcCfmRemoteMepStatsEntry 12 }
|
|
|
|
rcCfmRemoteMepStatsDbRdi OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of the RDI bit in the last received CCM (true for
|
|
RDI=1), or false if none has been received."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.6.3 and 20.15.2"
|
|
::= { rcCfmRemoteMepStatsEntry 13 }
|
|
|
|
rcCfmRemoteMepStatsIfTlvRx OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
up(2),
|
|
down(3),
|
|
lowerLayerDown(4),
|
|
testing(5),
|
|
unknown(6),
|
|
dormant(7),
|
|
notpresent(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To indicate the operational state of Interface Status TLV received
|
|
on MaintenanceEndpoint. This status indicates that the state of the
|
|
remote UNI Port"
|
|
::= { rcCfmRemoteMepStatsEntry 14 }
|
|
|
|
-- Maintenance Intermediate Point Table
|
|
|
|
-- Maintenance Intermediate Point Table
|
|
|
|
rcCfmMaintenanceIntermediatePointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmMaintenanceIntermediatePointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance Intermediate Point table"
|
|
::= { rcCfm 13}
|
|
|
|
rcCfmMaintenanceIntermediatePointEntry OBJECT-TYPE
|
|
SYNTAX RcCfmMaintenanceIntermediatePointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance Intermediate Point entry."
|
|
INDEX {rcCfmMaintenanceIntermediatePointDomainIndex, rcCfmMaintenanceIntermediatePointId }
|
|
::= { rcCfmMaintenanceIntermediatePointTable 1}
|
|
|
|
RcCfmMaintenanceIntermediatePointEntry ::=
|
|
SEQUENCE {
|
|
rcCfmMaintenanceIntermediatePointDomainIndex Integer32,
|
|
rcCfmMaintenanceIntermediatePointId Integer32,
|
|
rcCfmMaintenanceIntermediatePointDomainName DisplayString,
|
|
rcCfmMaintenanceIntermediatePointRowStatus RowStatus,
|
|
rcCfmMaintenanceIntermediatePointMipType INTEGER,
|
|
rcCfmMaintenanceIntermediatePointClearStats TruthValue,
|
|
rcCfmMaintenanceIntermediatePointServiceDescription DisplayString
|
|
}
|
|
|
|
rcCfmMaintenanceIntermediatePointDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmMaintenanceIntermediatePointEntry 1}
|
|
|
|
rcCfmMaintenanceIntermediatePointId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance IntermediatePoint ID"
|
|
::= { rcCfmMaintenanceIntermediatePointEntry 2}
|
|
|
|
rcCfmMaintenanceIntermediatePointDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmMaintenanceIntermediatePointEntry 3}
|
|
|
|
rcCfmMaintenanceIntermediatePointRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmMaintenanceIntermediatePointEntry 4}
|
|
|
|
rcCfmMaintenanceIntermediatePointMipType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vlan(1),
|
|
unused(2),
|
|
endptClient(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mip Type"
|
|
::= { rcCfmMaintenanceIntermediatePointEntry 5 }
|
|
|
|
rcCfmMaintenanceIntermediatePointClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "To clear the MIP CCM sending/receiving
|
|
message counter"
|
|
DEFVAL { false }
|
|
::= { rcCfmMaintenanceIntermediatePointEntry 6 }
|
|
|
|
rcCfmMaintenanceIntermediatePointServiceDescription OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..48))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to specify what service this mip assigned to"
|
|
::= { rcCfmMaintenanceIntermediatePointEntry 7}
|
|
|
|
--- CFM NNI Table
|
|
|
|
rcCfmNniTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmNniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM NNI table"
|
|
::= { rcCfm 14 }
|
|
|
|
rcCfmNniEntry OBJECT-TYPE
|
|
SYNTAX RcCfmNniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM NNI table entry"
|
|
INDEX { rcCfmNniPort, rcCfmNniServiceId, rcCfmNniPwIndex, rcCfmNniTlsIndex}
|
|
::= { rcCfmNniTable 1 }
|
|
|
|
RcCfmNniEntry ::=
|
|
SEQUENCE {
|
|
rcCfmNniPort InterfaceIndex,
|
|
rcCfmNniServiceId Integer32,
|
|
rcCfmNniPwIndex Integer32,
|
|
rcCfmNniTlsIndex Integer32,
|
|
rcCfmNniTgName DisplayString
|
|
|
|
}
|
|
|
|
rcCfmNniPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Port"
|
|
::= { rcCfmNniEntry 1}
|
|
|
|
rcCfmNniServiceId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "TDI or MIM"
|
|
::= { rcCfmNniEntry 2}
|
|
|
|
rcCfmNniPwIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PW index"
|
|
::= { rcCfmNniEntry 3}
|
|
|
|
rcCfmNniTlsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Access Port"
|
|
::= { rcCfmNniEntry 4}
|
|
|
|
rcCfmNniTgName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Group Name"
|
|
::= { rcCfmNniEntry 5}
|
|
|
|
--- PBT NNI Stats Table
|
|
|
|
rcCfmNniStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmNniStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM NNI stats table"
|
|
::= { rcCfm 15 }
|
|
|
|
rcCfmNniStatsEntry OBJECT-TYPE
|
|
SYNTAX RcCfmNniStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM NNI Stats table entry. Contain bytes processed and dropped
|
|
due to lookup failure in the SDT table"
|
|
INDEX { rcCfmNniStatsPort}
|
|
::= { rcCfmNniStatsTable 1 }
|
|
|
|
RcCfmNniStatsEntry ::=
|
|
SEQUENCE {
|
|
rcCfmNniStatsPort InterfaceIndex,
|
|
rcCfmNniStatsOel2RxOctets Counter64,
|
|
rcCfmNniStatsOel2RxDroppedOctets Counter64,
|
|
rcCfmNniStatsMimRxOctets Counter64,
|
|
rcCfmNniStatsMimRxDroppedOctets Counter64,
|
|
rcCfmNniStatsPweRxOctets Counter64,
|
|
rcCfmNniStatsPweRxDroppedOctets Counter64
|
|
}
|
|
|
|
rcCfmNniStatsPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Port"
|
|
::= { rcCfmNniStatsEntry 1}
|
|
|
|
rcCfmNniStatsOel2RxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of bytes (OEL2 encapsulation) processed on ingress NNI port"
|
|
::= { rcCfmNniStatsEntry 2}
|
|
|
|
rcCfmNniStatsOel2RxDroppedOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of bytes (OEL2 encapsulation) dropped on ingress NNI port"
|
|
::= { rcCfmNniStatsEntry 3}
|
|
|
|
rcCfmNniStatsMimRxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of bytes (MIM encapsulation) processed on ingress NNI port"
|
|
::= { rcCfmNniStatsEntry 4}
|
|
|
|
rcCfmNniStatsMimRxDroppedOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of bytes (MIM encapsulation) dropped on ingress NNI port"
|
|
::= { rcCfmNniStatsEntry 5}
|
|
|
|
rcCfmNniStatsPweRxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of bytes (PWE encapsulation) processed on ingress NNI port"
|
|
::= { rcCfmNniStatsEntry 6}
|
|
|
|
rcCfmNniStatsPweRxDroppedOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of bytes (PWE encapsulation) dropped on ingress NNI port"
|
|
::= { rcCfmNniStatsEntry 7}
|
|
|
|
|
|
|
|
rcCfmMipStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmMipStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Mip stats table"
|
|
::= { rcCfm 16 }
|
|
|
|
rcCfmMipStatsEntry OBJECT-TYPE
|
|
SYNTAX RcCfmMipStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Mip Stats table entry. Contain CFM Mip message number of
|
|
receiving/replying loopback & linktrace."
|
|
INDEX { rcCfmMipStatsDomainIndex, rcCfmMipStatsMipId}
|
|
::= { rcCfmMipStatsTable 1 }
|
|
|
|
RcCfmMipStatsEntry ::=
|
|
SEQUENCE {
|
|
rcCfmMipStatsDomainIndex Integer32,
|
|
rcCfmMipStatsDomainName DisplayString,
|
|
rcCfmMipStatsMipId Integer32,
|
|
rcCfmMipStatsLoopbackReceived Counter64,
|
|
rcCfmMipStatsLoopbackReplied Counter64,
|
|
rcCfmMipStatsLinktraceReceived Counter64,
|
|
rcCfmMipStatsLinktraceReplied Counter64
|
|
}
|
|
|
|
rcCfmMipStatsDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmMipStatsEntry 1}
|
|
|
|
rcCfmMipStatsDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmMipStatsEntry 2}
|
|
|
|
rcCfmMipStatsMipId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Intermediate Point ID"
|
|
::= { rcCfmMipStatsEntry 3}
|
|
|
|
rcCfmMipStatsLoopbackReceived OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM loopback messages received."
|
|
::= { rcCfmMipStatsEntry 4 }
|
|
|
|
rcCfmMipStatsLoopbackReplied OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM loopback messages replied."
|
|
::= { rcCfmMipStatsEntry 5 }
|
|
|
|
rcCfmMipStatsLinktraceReceived OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM linktrace messages received."
|
|
::= { rcCfmMipStatsEntry 6 }
|
|
|
|
rcCfmMipStatsLinktraceReplied OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM linktrace messages replied."
|
|
::= { rcCfmMipStatsEntry 7 }
|
|
|
|
-- The Transmit Loopback Table
|
|
|
|
rcCfmTransmitLbmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmTransmitLbmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management transmit LBM table"
|
|
::= { rcCfm 17}
|
|
|
|
rcCfmTransmitLbmEntry OBJECT-TYPE
|
|
SYNTAX RcCfmTransmitLbmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance EndPoint LBM entry."
|
|
INDEX {rcCfmTransmitLbmDomainIndex, rcCfmTransmitLbmAssociationIndex, rcCfmTransmitLbmIndex }
|
|
::= { rcCfmTransmitLbmTable 1}
|
|
|
|
RcCfmTransmitLbmEntry ::=
|
|
SEQUENCE {
|
|
rcCfmTransmitLbmDomainIndex Integer32,
|
|
rcCfmTransmitLbmAssociationIndex Integer32,
|
|
rcCfmTransmitLbmIndex Integer32,
|
|
rcCfmTransmitLbmDomainName DisplayString,
|
|
rcCfmTransmitLbmAssociationName DisplayString,
|
|
rcCfmTransmitLbmDestMacAddress MacAddress,
|
|
rcCfmTransmitLbmDestMepId Integer32,
|
|
rcCfmTransmitLbmDestIsMepId TruthValue,
|
|
rcCfmTransmitLbmMessages Integer32,
|
|
rcCfmTransmitLbmVlanPriority Integer32,
|
|
rcCfmTransmitLbmVlanDropEnable TruthValue,
|
|
rcCfmTransmitLbmSeqNumber Integer32,
|
|
rcCfmTransmitLbmResultOk TruthValue,
|
|
rcCfmTransmitLbmStatus INTEGER,
|
|
rcCfmTransmitLbmResult DisplayString,
|
|
rcCfmTransmitLbmMode INTEGER,
|
|
rcCfmTransmitLbmTimeoutInt Integer32,
|
|
rcCfmTransmitLbmInterFrameInt Integer32,
|
|
rcCfmTransmitLbmTestPattern INTEGER,
|
|
rcCfmTransmitLbmDataSize Integer32,
|
|
rcCfmTransmitLbmFrameSize Integer32,
|
|
rcCfmTransmitLbmSourceMode INTEGER
|
|
}
|
|
|
|
rcCfmTransmitLbmDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmTransmitLbmEntry 1}
|
|
|
|
rcCfmTransmitLbmAssociationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmTransmitLbmEntry 2}
|
|
|
|
rcCfmTransmitLbmIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint Index"
|
|
::= { rcCfmTransmitLbmEntry 3}
|
|
|
|
rcCfmTransmitLbmDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmTransmitLbmEntry 4}
|
|
|
|
rcCfmTransmitLbmAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmTransmitLbmEntry 5}
|
|
|
|
rcCfmTransmitLbmDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An indication of the target MAC Address Field to
|
|
be transmitted, either:
|
|
A unicast destination MAC address."
|
|
::= { rcCfmTransmitLbmEntry 6}
|
|
|
|
rcCfmTransmitLbmDestMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8191)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An indication of the target MAC Address Field to
|
|
be transmitted, either:
|
|
The Maintenance Assiciation End Point identifier of
|
|
another MEP in the same Maintenance Association"
|
|
::= { rcCfmTransmitLbmEntry 7}
|
|
|
|
rcCfmTransmitLbmDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "True indicates that MepId of the target MEP is used
|
|
for Loopback transmission.
|
|
False indicates that unicast destination MAC address
|
|
of the target MEP is used for Loopback transmission."
|
|
::= { rcCfmTransmitLbmEntry 8}
|
|
|
|
rcCfmTransmitLbmMessages OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of loopback messages to be transmitted."
|
|
|
|
DEFVAL {1}
|
|
::= { rcCfmTransmitLbmEntry 9}
|
|
|
|
rcCfmTransmitLbmVlanPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Priority. 3 bit value to be used in the VLAN tsg, if present in
|
|
the transmitted frame."
|
|
DEFVAL {7}
|
|
::= { rcCfmTransmitLbmEntry 11}
|
|
|
|
rcCfmTransmitLbmVlanDropEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Drop Enable bit value to be used in the VLAN tag, if present in
|
|
the transmitted frame."
|
|
DEFVAL {false}
|
|
::= { rcCfmTransmitLbmEntry 12}
|
|
|
|
rcCfmTransmitLbmSeqNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The transaction identifier/sequence number of the first loopback
|
|
message (to be) sent."
|
|
DEFVAL {0}
|
|
::= { rcCfmTransmitLbmEntry 13}
|
|
|
|
rcCfmTransmitLbmResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the result of the operation:
|
|
-true. The Loopback Message(s) will be (or have been) sent.
|
|
-false. The Loopback Message(s) will not be sent."
|
|
DEFVAL {true}
|
|
::= { rcCfmTransmitLbmEntry 14}
|
|
|
|
rcCfmTransmitLbmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
transmit(2),
|
|
abort(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Status of the transmit loopback service:
|
|
-ready. The service is available.
|
|
-transmit. The service is transmitting, or about to transmit,
|
|
the Loopback messages.
|
|
-abort The service is aborted or about to abort the Loopback messages.
|
|
|
|
This column will also be used to avoid concurrency or
|
|
race condition problems that could occur if two or
|
|
more management entities try to
|
|
use the service at the same time. "
|
|
REFERENCE "Delete notReady status due to CR Q01482201"
|
|
DEFVAL {ready}
|
|
::= { rcCfmTransmitLbmEntry 15}
|
|
|
|
rcCfmTransmitLbmResult OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..799))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display the LBM result."
|
|
::= { rcCfmTransmitLbmEntry 16}
|
|
|
|
rcCfmTransmitLbmMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
throughput(1),
|
|
roundTripTime(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Modes of the transmit loopback service:
|
|
|
|
throughput: The throughput mode of operation.
|
|
LBM Frame will be sent out at the configured transmit
|
|
interval rate for the burst-count number.
|
|
|
|
roundTripTime: The RoundTripTime mode of operation.
|
|
LBM Frame will be sent out one at a time and the
|
|
transmit time will be recorded locally. "
|
|
DEFVAL {throughput}
|
|
::= { rcCfmTransmitLbmEntry 17}
|
|
|
|
rcCfmTransmitLbmTimeoutInt OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interval to wait for an LBM time-out with a
|
|
range of (1..10) seconds with a default value of 3
|
|
seconds."
|
|
DEFVAL {3}
|
|
::= { rcCfmTransmitLbmEntry 18}
|
|
|
|
rcCfmTransmitLbmInterFrameInt OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interval between LBM frames with a range of
|
|
(0..1000) msecs with a default value of 500 msecs.
|
|
The value of 0 msecs indicates to send the frames as
|
|
fast as possible."
|
|
DEFVAL {500}
|
|
::= { rcCfmTransmitLbmEntry 19}
|
|
|
|
rcCfmTransmitLbmTestPattern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allZero(1),
|
|
allZeroCrc(2),
|
|
pseudoRandomBitSequence(3),
|
|
pseudoRandomBitSequenceCrc(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The test pattern to use in the LBM PDU with range of
|
|
values namely allZero, allZeroCrc,
|
|
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
|
|
and with a default value of allZero.
|
|
value meaning
|
|
-------- -------
|
|
allZero(1) Null signal without CRC-32
|
|
allZeroCrc(2) Null signal with CRC-32
|
|
pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32
|
|
pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32"
|
|
DEFVAL {allZero}
|
|
::= { rcCfmTransmitLbmEntry 20}
|
|
|
|
rcCfmTransmitLbmDataSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An arbitrary amount of data to be included in the data TLV, if the
|
|
Data Size is selected to be sent."
|
|
DEFVAL {0}
|
|
::= { rcCfmTransmitLbmEntry 21}
|
|
|
|
|
|
rcCfmTransmitLbmFrameSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..9600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If the frame size is specified then the data size shall
|
|
be internally calculated and the calculated data size
|
|
shall be included in the data TLV."
|
|
DEFVAL {0}
|
|
::= { rcCfmTransmitLbmEntry 22}
|
|
|
|
rcCfmTransmitLbmSourceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nodal(1),
|
|
smltVirtual(2),
|
|
noVlanMac(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source modes of the transmit loopback service. "
|
|
DEFVAL {nodal}
|
|
::= { rcCfmTransmitLbmEntry 23}
|
|
|
|
-- The Transmit Linktrace Table
|
|
|
|
rcCfmTransmitLtmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmTransmitLtmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management transmit LTM table"
|
|
::= { rcCfm 18}
|
|
|
|
rcCfmTransmitLtmEntry OBJECT-TYPE
|
|
SYNTAX RcCfmTransmitLtmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance EndPoint LTM entry."
|
|
INDEX {rcCfmTransmitLtmDomainIndex, rcCfmTransmitLtmAssociationIndex, rcCfmTransmitLtmIndex }
|
|
::= { rcCfmTransmitLtmTable 1}
|
|
|
|
RcCfmTransmitLtmEntry ::=
|
|
SEQUENCE {
|
|
rcCfmTransmitLtmDomainIndex Integer32,
|
|
rcCfmTransmitLtmAssociationIndex Integer32,
|
|
rcCfmTransmitLtmIndex Integer32,
|
|
rcCfmTransmitLtmDomainName DisplayString,
|
|
rcCfmTransmitLtmAssociationName DisplayString,
|
|
rcCfmTransmitLtmVlanPriority Integer32,
|
|
rcCfmTransmitLtmDestMacAddress MacAddress,
|
|
rcCfmTransmitLtmDestMepId Integer32,
|
|
rcCfmTransmitLtmDestIsMepId TruthValue,
|
|
rcCfmTransmitLtmTtl Integer32,
|
|
rcCfmTransmitLtmSeqNumber Integer32,
|
|
rcCfmTransmitLtmResultOk TruthValue,
|
|
rcCfmTransmitLtmStatus INTEGER,
|
|
rcCfmTransmitLtmResult DisplayString,
|
|
rcCfmTransmitLtmFlag INTEGER,
|
|
rcCfmTransmitLtmSourceMode INTEGER
|
|
}
|
|
|
|
rcCfmTransmitLtmDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmTransmitLtmEntry 1}
|
|
|
|
rcCfmTransmitLtmAssociationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmTransmitLtmEntry 2}
|
|
|
|
rcCfmTransmitLtmIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint Index"
|
|
::= { rcCfmTransmitLtmEntry 3}
|
|
|
|
rcCfmTransmitLtmDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmTransmitLtmEntry 4}
|
|
|
|
rcCfmTransmitLtmAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmTransmitLtmEntry 5}
|
|
|
|
rcCfmTransmitLtmVlanPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Priority. 3 bit value to be used in the VLAN tag, if present in
|
|
the transmitted frame."
|
|
DEFVAL {7}
|
|
::= { rcCfmTransmitLtmEntry 6}
|
|
|
|
rcCfmTransmitLtmDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An indication of the target MAC Address Field to
|
|
be transmitted, either:
|
|
A unicast destination MAC address."
|
|
::= { rcCfmTransmitLtmEntry 7}
|
|
|
|
rcCfmTransmitLtmDestMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8191)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An indication of the target MAC Address Field to
|
|
be transmitted, either:
|
|
The Maintenance Assiciation End Point identifier of
|
|
another MEP in the same Maintenance Association"
|
|
::= { rcCfmTransmitLtmEntry 8}
|
|
|
|
rcCfmTransmitLtmDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "True indicates that MepId of the target MEP is used
|
|
for Loopback transmission.
|
|
False indicates that unicast destination MAC address
|
|
of the target MEP is used for Loopback transmission."
|
|
::= { rcCfmTransmitLtmEntry 9}
|
|
|
|
rcCfmTransmitLtmTtl OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of hops remaining to this LTM.
|
|
Decremented by 1 by each Bridge that handles the LTM.
|
|
The decremented value is returned in the LTR. If 0
|
|
on output, the LTM is not transmitted to the next
|
|
hop. The value of the TTL Field in the LTM
|
|
transmitted by the originating MEP is controlled by a
|
|
Managed Object; The default value if none is
|
|
specified is 64."
|
|
DEFVAL {64}
|
|
::= { rcCfmTransmitLtmEntry 10}
|
|
|
|
rcCfmTransmitLtmSeqNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The transaction identifier/sequence number of the first loopback
|
|
message (to be) sent."
|
|
DEFVAL {0}
|
|
::= { rcCfmTransmitLtmEntry 11}
|
|
|
|
rcCfmTransmitLtmResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the result of the operation:
|
|
-true. The Loopback Message(s) will be (or have been) sent.
|
|
-false. The Loopback Message(s) will not be sent."
|
|
DEFVAL {true}
|
|
::= { rcCfmTransmitLtmEntry 12}
|
|
|
|
rcCfmTransmitLtmStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
transmit(2),
|
|
abort(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Status of the transmit loopback service:
|
|
-ready. The service is available.
|
|
-transmit. The service is transmitting, or about to
|
|
transmit, the Loopback messages.
|
|
|
|
-abort. The service is aborted, or about to abort
|
|
the LTM message
|
|
|
|
This column will also be used to avoid concurrency or
|
|
race condition problems that could occur if two or
|
|
more management entities try to
|
|
use the service at the same time. "
|
|
REFERENCE "Delete notReady status due to CR Q01482201"
|
|
DEFVAL {ready}
|
|
::= { rcCfmTransmitLtmEntry 13}
|
|
|
|
rcCfmTransmitLtmResult OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..1023))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION "Display the LTM result."
|
|
::= { rcCfmTransmitLtmEntry 14}
|
|
|
|
rcCfmTransmitLtmFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
internalError(2),
|
|
noRemoteMep(3),
|
|
invalidRemoteMepMac(4),
|
|
noRemoteMepMacLearned(5),
|
|
mepDisabled(6),
|
|
noLtrResponse(7),
|
|
ltmToOwnMepMac(8),
|
|
epDisabled(9),
|
|
trunkDisabled(10),
|
|
ltmComplete(11),
|
|
ltmLeafNode(12)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "LTM result flag indicating LTM status or error code.
|
|
Each enum value represents a status or error case.
|
|
1 - No error
|
|
2 - Ltm Internal Error
|
|
3 - Unknown Remote Maintenance End Point
|
|
4 - Invalid Remote Maintenance End Point Mac Address
|
|
5 - Unset Remote Maintenance End Point Mac Address
|
|
6 - Mep must be enabled in order to perform LTM
|
|
7 - No Ltr response received
|
|
8 - Linktrace to own Mep MAC is not sent
|
|
9 - Endpoint must be enabled in order to perform LTM
|
|
10 - Pbt-trunk must be enabled in order to perform LTM
|
|
11 - LTM completed
|
|
12 - LTM leaf node"
|
|
::= { rcCfmTransmitLtmEntry 15}
|
|
|
|
rcCfmTransmitLtmSourceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nodal(1),
|
|
smltVirtual(2),
|
|
noVlanMac(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source modes of the transmit linktrace service. "
|
|
DEFVAL {nodal}
|
|
::= {rcCfmTransmitLtmEntry 16 }
|
|
|
|
rcCfmPbtTrunkStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmPbtTrunkStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of PBT trunk statistics."
|
|
::= { rcCfm 19 }
|
|
|
|
rcCfmPbtTrunkStatsEntry OBJECT-TYPE
|
|
SYNTAX RcCfmPbtTrunkStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A PBT Trunk Statistics table entry."
|
|
INDEX { rcCfmPbtTrunkStatsName }
|
|
::= { rcCfmPbtTrunkStatsTable 1 }
|
|
|
|
RcCfmPbtTrunkStatsEntry ::=
|
|
SEQUENCE {
|
|
|
|
rcCfmPbtTrunkStatsName CfmNameString,
|
|
rcCfmPbtTrunkStatsPort InterfaceIndex,
|
|
rcCfmPbtTrunkStatsDA MacAddress,
|
|
rcCfmPbtTrunkStatsVlanId Integer32,
|
|
rcCfmPbtTrunkStatsRevVlanId Integer32,
|
|
rcCfmPbtTrunkStatsSA MacAddress,
|
|
rcCfmPbtTrunkStatsRxOctets Counter64,
|
|
rcCfmPbtTrunkStatsRxFrames Counter64,
|
|
rcCfmPbtTrunkStatsTxOctets Counter64,
|
|
rcCfmPbtTrunkStatsTxFrames Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit0Octets Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit0Frames Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit1Octets Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit1Frames Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit2Octets Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit2Frames Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit3Octets Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit3Frames Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit4Octets Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit4Frames Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit5Octets Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit5Frames Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit6Octets Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit6Frames Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit7Octets Counter64,
|
|
rcCfmPbtTrunkStatsRxPbit7Frames Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit0Octets Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit0Frames Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit1Octets Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit1Frames Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit2Octets Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit2Frames Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit3Octets Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit3Frames Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit4Octets Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit4Frames Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit5Octets Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit5Frames Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit6Octets Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit6Frames Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit7Octets Counter64,
|
|
rcCfmPbtTrunkStatsTxPbit7Frames Counter64
|
|
}
|
|
rcCfmPbtTrunkStatsName OBJECT-TYPE
|
|
SYNTAX CfmNameString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Name."
|
|
::= { rcCfmPbtTrunkStatsEntry 1 }
|
|
|
|
rcCfmPbtTrunkStatsPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBT Trunk Port"
|
|
::= { rcCfmPbtTrunkStatsEntry 2}
|
|
|
|
rcCfmPbtTrunkStatsDA OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Trunk Mac (remote CP mac)"
|
|
::= { rcCfmPbtTrunkStatsEntry 3}
|
|
|
|
|
|
rcCfmPbtTrunkStatsVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBT trunk VLAN ID"
|
|
::= { rcCfmPbtTrunkStatsEntry 4}
|
|
|
|
rcCfmPbtTrunkStatsRevVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "PBT trunk reverse VLAN ID"
|
|
::= { rcCfmPbtTrunkStatsEntry 5}
|
|
|
|
|
|
rcCfmPbtTrunkStatsSA OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Trunk Source Mac (local switch PBT mac)"
|
|
::= { rcCfmPbtTrunkStatsEntry 6}
|
|
|
|
|
|
rcCfmPbtTrunkStatsRxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Octets received by the trunk.This does not include
|
|
trunk CCM messag (control) packets."
|
|
::= { rcCfmPbtTrunkStatsEntry 7 }
|
|
|
|
rcCfmPbtTrunkStatsRxFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Packets received by the trunk.This does not include
|
|
trunk CCM messag (control) packets."
|
|
::= { rcCfmPbtTrunkStatsEntry 8 }
|
|
|
|
rcCfmPbtTrunkStatsTxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Octets transmitted by the trunk.This does not include
|
|
trunk CCM messag (control) packets."
|
|
::= { rcCfmPbtTrunkStatsEntry 9 }
|
|
|
|
rcCfmPbtTrunkStatsTxFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Packets transmitted by the trunk.This does not include
|
|
trunk CCM messag (control) packets."
|
|
::= { rcCfmPbtTrunkStatsEntry 10 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit0Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 0 Octets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 11 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit0Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 0 Packets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 12 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit1Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 1 Octets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 13 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit1Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 1 Packets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 14 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit2Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 2 Octets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 15 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit2Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 2 Packets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 16 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit3Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 3 Octets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 17 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit3Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 3 Packets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 18 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit4Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 4 Octets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 19 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit4Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 4 Packets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 20 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit5Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 5 Octets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 21 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit5Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 5 Packets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 22 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit6Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit64 Octets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 23 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit6Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 6 Packets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 24 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit7Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit64 Octets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 25 }
|
|
|
|
rcCfmPbtTrunkStatsRxPbit7Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 6 Packets received by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 26 }
|
|
|
|
|
|
rcCfmPbtTrunkStatsTxPbit0Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 0 Octets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 27 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit0Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 0 Packets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 28 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit1Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 1 Octets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 29 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit1Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 1 Packets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 30 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit2Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 2 Octets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 31 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit2Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 2 Packets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 32 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit3Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 3 Octets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 33 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit3Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 3 Packets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 34 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit4Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 4 Octets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 35 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit4Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 4 Packets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 36 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit5Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit 5 Octets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 37 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit5Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 5 Packets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 38 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit6Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit64 Octets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 39 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit6Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 6 Packets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 40 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit7Octets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Pbit64 Octets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 41 }
|
|
|
|
rcCfmPbtTrunkStatsTxPbit7Frames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of P-Bit 6 Packets transmitted by the trunk."
|
|
::= { rcCfmPbtTrunkStatsEntry 42 }
|
|
|
|
-- CFM Port stats table
|
|
rcCfmPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Port stats table contains the
|
|
port Tx and Rx CFM statistics"
|
|
::= { rcCfm 20 }
|
|
|
|
rcCfmPortStatsEntry OBJECT-TYPE
|
|
SYNTAX RcCfmPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Port Stats table entry. Contain port's CFM Message
|
|
sending/receiving counter."
|
|
INDEX { rcCfmPortStatsIndex }
|
|
::= { rcCfmPortStatsTable 1 }
|
|
|
|
RcCfmPortStatsEntry ::=
|
|
SEQUENCE {
|
|
rcCfmPortStatsIndex InterfaceIndex,
|
|
rcCfmPortStatsTxCnt Counter64,
|
|
rcCfmPortStatsRxCnt Counter64
|
|
}
|
|
|
|
rcCfmPortStatsIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Slot/Port index"
|
|
::= { rcCfmPortStatsEntry 1}
|
|
|
|
rcCfmPortStatsTxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM messages that are
|
|
sent by port"
|
|
::= { rcCfmPortStatsEntry 2 }
|
|
|
|
rcCfmPortStatsRxCnt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total Number of CFM messages are
|
|
received by port"
|
|
::= { rcCfmPortStatsEntry 3 }
|
|
|
|
-- Frame Loss Ratio Profile Table
|
|
|
|
rcCfmFlrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmFlrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Frame Loss Ratio Profile table"
|
|
::= { rcCfm 21 }
|
|
|
|
rcCfmFlrEntry OBJECT-TYPE
|
|
SYNTAX RcCfmFlrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Frame Loss Ratio entry."
|
|
INDEX {rcCfmFlrIndex}
|
|
::= { rcCfmFlrTable 1}
|
|
|
|
RcCfmFlrEntry ::=
|
|
SEQUENCE {
|
|
rcCfmFlrIndex Integer32,
|
|
rcCfmFlrProfileName DisplayString,
|
|
rcCfmFlrRowStatus RowStatus,
|
|
rcCfmFlrPriority Integer32,
|
|
rcCfmFlrAlarmThresholdPercent Integer32,
|
|
rcCfmFlrAlarmThresholdSubPercent Integer32,
|
|
rcCfmFlrClearThresholdPercent Integer32,
|
|
rcCfmFlrClearThresholdSubPercent Integer32,
|
|
rcCfmFlrThresholdState EnableValue,
|
|
rcCfmFlrNumberOfRefs Gauge32
|
|
}
|
|
|
|
rcCfmFlrIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Frame-Loss-Ratio profile index"
|
|
::= { rcCfmFlrEntry 1}
|
|
|
|
rcCfmFlrProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Frame-Loss-Ratio Profile Name"
|
|
::= { rcCfmFlrEntry 2}
|
|
|
|
rcCfmFlrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmFlrEntry 3}
|
|
|
|
rcCfmFlrPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Frame Loss Ratio messaging runs on COS priority"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmFlrEntry 4}
|
|
|
|
rcCfmFlrAlarmThresholdPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FLR set alarm threshold percentage"
|
|
DEFVAL { 85 }
|
|
::= { rcCfmFlrEntry 5}
|
|
|
|
rcCfmFlrAlarmThresholdSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FLR set alarm threshold percentage in 1/100 percent increments"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFlrEntry 6}
|
|
|
|
rcCfmFlrClearThresholdPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FLR clear alarm threshold percentage"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFlrEntry 7}
|
|
|
|
rcCfmFlrClearThresholdSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FLR clear alarm threshold percentage in 1/100 percent increments"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFlrEntry 8}
|
|
|
|
rcCfmFlrThresholdState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FLR threshold State"
|
|
DEFVAL { disable }
|
|
::= { rcCfmFlrEntry 9}
|
|
|
|
rcCfmFlrNumberOfRefs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of PMs that reference this flr-profile"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFlrEntry 10}
|
|
|
|
-- Frame Delay and Frame Delay Variation Profile Table
|
|
|
|
rcCfmFdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmFdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Delay and Frame Delay Variation Profile table
|
|
"
|
|
::= { rcCfm 22 }
|
|
|
|
rcCfmFdEntry OBJECT-TYPE
|
|
SYNTAX RcCfmFdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Frame Delay and Frame Delay Variation entry."
|
|
INDEX {rcCfmFdIndex}
|
|
::= { rcCfmFdTable 1}
|
|
|
|
RcCfmFdEntry ::=
|
|
SEQUENCE {
|
|
rcCfmFdIndex Integer32,
|
|
rcCfmFdProfileName DisplayString,
|
|
rcCfmFdRowStatus RowStatus,
|
|
rcCfmFdPriority Integer32,
|
|
rcCfmFdPerformanceTarget Integer32,
|
|
rcCfmFdAlarmThresholdPercent Integer32,
|
|
rcCfmFdAlarmThresholdSubPercent Integer32,
|
|
rcCfmFdClearThresholdPercent Integer32,
|
|
rcCfmFdClearThresholdSubPercent Integer32,
|
|
rcCfmFdFdvPerformanceTarget Integer32,
|
|
rcCfmFdFdvAlarmThresholdPercent Integer32,
|
|
rcCfmFdFdvAlarmThresholdSubPercent Integer32,
|
|
rcCfmFdFdvClearThresholdPercent Integer32,
|
|
rcCfmFdFdvClearThresholdSubPercent Integer32,
|
|
rcCfmFdThresholdState EnableValue,
|
|
rcCfmFdNumberOfRefs Gauge32
|
|
}
|
|
|
|
rcCfmFdIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Frame-Delay profile index"
|
|
::= { rcCfmFdEntry 1}
|
|
|
|
rcCfmFdProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..22))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Frame-Delay Profile Name"
|
|
::= { rcCfmFdEntry 2}
|
|
|
|
rcCfmFdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmFdEntry 3}
|
|
|
|
rcCfmFdPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Frame Delay messaging runs on COS priority"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmFdEntry 4}
|
|
|
|
rcCfmFdPerformanceTarget OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Frame delay performance objective in microseconds"
|
|
DEFVAL { 10000000 }
|
|
::= { rcCfmFdEntry 5}
|
|
|
|
rcCfmFdAlarmThresholdPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FD set alarm threshold percentage"
|
|
DEFVAL { 85 }
|
|
::= { rcCfmFdEntry 6}
|
|
|
|
rcCfmFdAlarmThresholdSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FD set alarm threshold percentage in 1/100 percent incr
|
|
ements"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFdEntry 7}
|
|
|
|
rcCfmFdClearThresholdPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FD clear alarm threshold percentage"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFdEntry 8}
|
|
|
|
rcCfmFdClearThresholdSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FD clear alarm threshold percentage in 1/100 percent in
|
|
crements"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFdEntry 9}
|
|
|
|
rcCfmFdFdvPerformanceTarget OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Frame delay variation performance objective in microseconds"
|
|
DEFVAL { 10000000 }
|
|
::= { rcCfmFdEntry 10}
|
|
|
|
rcCfmFdFdvAlarmThresholdPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FDV set alarm threshold percentage"
|
|
DEFVAL { 85 }
|
|
::= { rcCfmFdEntry 11}
|
|
|
|
rcCfmFdFdvAlarmThresholdSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FDV set alarm threshold percentage in 1/100 percent inc
|
|
rements"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFdEntry 12}
|
|
|
|
rcCfmFdFdvClearThresholdPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FDV clear alarm threshold percentage"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFdEntry 13}
|
|
|
|
rcCfmFdFdvClearThresholdSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FDV clear alarm threshold percentage in 1/100 percent i
|
|
ncrements"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFdEntry 14}
|
|
|
|
rcCfmFdThresholdState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "FD / FDV threshold State"
|
|
DEFVAL { disable }
|
|
::= { rcCfmFdEntry 15}
|
|
|
|
rcCfmFdNumberOfRefs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of PM's that referencen this fd-profile"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmFdEntry 16}
|
|
|
|
-- Frame Loss Ratio Stats Info Table
|
|
|
|
rcCfmFlrStatsInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmFlrStatsInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Loss Ratio Stats Info"
|
|
::= { rcCfm 23}
|
|
|
|
rcCfmFlrStatsInfoEntry OBJECT-TYPE
|
|
SYNTAX RcCfmFlrStatsInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Frame Loss Ratio Stats Info entry."
|
|
INDEX { rcCfmFlrStatsInfoMdIndex,
|
|
rcCfmFlrStatsInfoMaIndex,
|
|
rcCfmFlrStatsInfoMepId,
|
|
rcCfmFlrStatsInfoRmepId,
|
|
rcCfmFlrStatsInfoPriorityIndex }
|
|
::= { rcCfmFlrStatsInfoTable 1}
|
|
|
|
RcCfmFlrStatsInfoEntry ::=
|
|
SEQUENCE {
|
|
rcCfmFlrStatsInfoMdIndex Integer32,
|
|
rcCfmFlrStatsInfoMaIndex Integer32,
|
|
rcCfmFlrStatsInfoMepId Integer32,
|
|
rcCfmFlrStatsInfoRmepId Integer32,
|
|
rcCfmFlrStatsInfoPriorityIndex Integer32,
|
|
rcCfmFlrStatsInfoMdName DisplayString,
|
|
rcCfmFlrStatsInfoMaName DisplayString,
|
|
rcCfmFlrStatsInfoPriority Integer32,
|
|
rcCfmFlrStatsInfoNearEndPercent Integer32,
|
|
rcCfmFlrStatsInfoNearEndSubPercent Integer32,
|
|
rcCfmFlrStatsInfoFarEndPercent Integer32,
|
|
rcCfmFlrStatsInfoFarEndSubPercent Integer32,
|
|
rcCfmFlrStatsInfoPmOperState RcCfmPmOperState
|
|
}
|
|
|
|
rcCfmFlrStatsInfoMdIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFlrStatsInfoEntry 1}
|
|
|
|
rcCfmFlrStatsInfoMaIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFlrStatsInfoEntry 2}
|
|
|
|
rcCfmFlrStatsInfoMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmFlrStatsInfoEntry 3}
|
|
|
|
rcCfmFlrStatsInfoRmepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Peer Identifier which matches a RemoteMepId.
|
|
The performance monitoring pair is MepId-RmepId"
|
|
::= { rcCfmFlrStatsInfoEntry 4}
|
|
|
|
rcCfmFlrStatsInfoPriorityIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "priorityIndex equals priority plus 1 - priority can't be
|
|
used as an index since it starts from 0"
|
|
::= { rcCfmFlrStatsInfoEntry 5}
|
|
|
|
rcCfmFlrStatsInfoMdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFlrStatsInfoEntry 6}
|
|
|
|
rcCfmFlrStatsInfoMaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFlrStatsInfoEntry 7}
|
|
|
|
rcCfmFlrStatsInfoPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Frame Loss Ratio messaging runs on COS priority"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmFlrStatsInfoEntry 8}
|
|
|
|
rcCfmFlrStatsInfoNearEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsInfoEntry 9}
|
|
|
|
rcCfmFlrStatsInfoNearEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsInfoEntry 10}
|
|
|
|
rcCfmFlrStatsInfoFarEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured far-end FLR percentage"
|
|
::= { rcCfmFlrStatsInfoEntry 11}
|
|
|
|
rcCfmFlrStatsInfoFarEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured far-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsInfoEntry 12}
|
|
|
|
rcCfmFlrStatsInfoPmOperState OBJECT-TYPE
|
|
SYNTAX RcCfmPmOperState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of the PM."
|
|
::= {rcCfmFlrStatsInfoEntry 13}
|
|
|
|
-- Frame Loss Ratio Stats Current Table
|
|
|
|
rcCfmFlrStatsCurrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmFlrStatsCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Loss Ratio Stats Current"
|
|
::= { rcCfm 24}
|
|
|
|
rcCfmFlrStatsCurrEntry OBJECT-TYPE
|
|
SYNTAX RcCfmFlrStatsCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Loss Ratio Stats Current entry."
|
|
INDEX { rcCfmFlrStatsCurrMdIndex,
|
|
rcCfmFlrStatsCurrMaIndex,
|
|
rcCfmFlrStatsCurrMepId,
|
|
rcCfmFlrStatsCurrRmepId,
|
|
rcCfmFlrStatsCurrPriorityIndex }
|
|
::= { rcCfmFlrStatsCurrTable 1}
|
|
|
|
RcCfmFlrStatsCurrEntry ::=
|
|
SEQUENCE {
|
|
rcCfmFlrStatsCurrMdIndex Integer32,
|
|
rcCfmFlrStatsCurrMaIndex Integer32,
|
|
rcCfmFlrStatsCurrMepId Integer32,
|
|
rcCfmFlrStatsCurrRmepId Integer32,
|
|
rcCfmFlrStatsCurrPriorityIndex Integer32,
|
|
rcCfmFlrStatsCurrMdName DisplayString,
|
|
rcCfmFlrStatsCurrMaName DisplayString,
|
|
rcCfmFlrStatsCurrPriority Integer32,
|
|
rcCfmFlrStatsCurrPmOperState RcCfmPmOperState,
|
|
rcCfmFlrStatsCurrStartTime OCTET STRING ,
|
|
rcCfmFlrStatsCurrEndTime OCTET STRING ,
|
|
rcCfmFlrStatsCurrHistInterval Gauge32,
|
|
rcCfmFlrStatsCurrSampleRate Gauge32,
|
|
rcCfmFlrStatsCurrNearEndPercent Integer32,
|
|
rcCfmFlrStatsCurrNearEndSubPercent Integer32,
|
|
rcCfmFlrStatsCurrFarEndPercent Integer32,
|
|
rcCfmFlrStatsCurrFarEndSubPercent Integer32,
|
|
rcCfmFlrStatsCurrMinNearEndPercent Integer32,
|
|
rcCfmFlrStatsCurrMinNearEndSubPercent Integer32,
|
|
rcCfmFlrStatsCurrMinFarEndPercent Integer32,
|
|
rcCfmFlrStatsCurrMinFarEndSubPercent Integer32,
|
|
rcCfmFlrStatsCurrMaxNearEndPercent Integer32,
|
|
rcCfmFlrStatsCurrMaxNearEndSubPercent Integer32,
|
|
rcCfmFlrStatsCurrMaxFarEndPercent Integer32,
|
|
rcCfmFlrStatsCurrMaxFarEndSubPercent Integer32,
|
|
rcCfmFlrStatsCurrTxFrames Counter64,
|
|
rcCfmFlrStatsCurrRxFrames Counter64,
|
|
rcCfmFlrStatsCurrFlFrames Counter64,
|
|
rcCfmFlrStatsCurrTxFarEndFrames Counter64,
|
|
rcCfmFlrStatsCurrRxFarEndFrames Counter64,
|
|
rcCfmFlrStatsCurrFlFarEndFrames Counter64,
|
|
rcCfmFlrStatsCurrSamplesPerInterval Gauge32,
|
|
rcCfmFlrStatsCurrSamplesTransmitted Gauge32,
|
|
rcCfmFlrStatsCurrMinFlFrames Counter32,
|
|
rcCfmFlrStatsCurrSamplesNotSent Gauge32,
|
|
rcCfmFlrStatsCurrSamplesReceived Gauge32,
|
|
rcCfmFlrStatsCurrMinFlFarEndFrames Counter32,
|
|
rcCfmFlrStatsCurrMaxFlFrames Counter32,
|
|
rcCfmFlrStatsCurrMaxFlFarEndFrames Counter32
|
|
}
|
|
|
|
rcCfmFlrStatsCurrMdIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFlrStatsCurrEntry 1}
|
|
|
|
rcCfmFlrStatsCurrMaIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFlrStatsCurrEntry 2}
|
|
|
|
rcCfmFlrStatsCurrMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmFlrStatsCurrEntry 3}
|
|
|
|
rcCfmFlrStatsCurrRmepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Peer Identifier which matches a RemoteMepId.
|
|
The performance monitoring pair is MepId-RmepId"
|
|
::= { rcCfmFlrStatsCurrEntry 4}
|
|
|
|
rcCfmFlrStatsCurrPriorityIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "priorityIndex equals priority plus 1 - priority can't be
|
|
used as an index since it starts from 0"
|
|
::= { rcCfmFlrStatsCurrEntry 5}
|
|
|
|
rcCfmFlrStatsCurrMdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFlrStatsCurrEntry 6}
|
|
|
|
rcCfmFlrStatsCurrMaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFlrStatsCurrEntry 7}
|
|
|
|
rcCfmFlrStatsCurrPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Frame Loss Ratio messaging runs on COS priority"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmFlrStatsCurrEntry 8}
|
|
|
|
rcCfmFlrStatsCurrPmOperState OBJECT-TYPE
|
|
SYNTAX RcCfmPmOperState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operational state of the PM."
|
|
::= {rcCfmFlrStatsCurrEntry 9}
|
|
|
|
rcCfmFlrStatsCurrStartTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time stamp."
|
|
::= { rcCfmFlrStatsCurrEntry 10}
|
|
|
|
rcCfmFlrStatsCurrEndTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time stamp."
|
|
::= { rcCfmFlrStatsCurrEntry 11}
|
|
|
|
rcCfmFlrStatsCurrHistInterval OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Interval"
|
|
::= { rcCfmFlrStatsCurrEntry 12}
|
|
|
|
rcCfmFlrStatsCurrSampleRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sample rate in seconds"
|
|
::= { rcCfmFlrStatsCurrEntry 13}
|
|
|
|
rcCfmFlrStatsCurrNearEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 14}
|
|
|
|
rcCfmFlrStatsCurrNearEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 15}
|
|
|
|
rcCfmFlrStatsCurrFarEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured far-end FLR percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 16}
|
|
|
|
rcCfmFlrStatsCurrFarEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured far-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 17}
|
|
|
|
rcCfmFlrStatsCurrMinNearEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 18}
|
|
|
|
rcCfmFlrStatsCurrMinNearEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 19}
|
|
|
|
rcCfmFlrStatsCurrMinFarEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 20}
|
|
|
|
rcCfmFlrStatsCurrMinFarEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 21}
|
|
|
|
rcCfmFlrStatsCurrMaxNearEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 22}
|
|
|
|
rcCfmFlrStatsCurrMaxNearEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 23}
|
|
|
|
rcCfmFlrStatsCurrMaxFarEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 24}
|
|
|
|
rcCfmFlrStatsCurrMaxFarEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsCurrEntry 25}
|
|
|
|
rcCfmFlrStatsCurrTxFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Tx frames"
|
|
::= { rcCfmFlrStatsCurrEntry 26}
|
|
|
|
rcCfmFlrStatsCurrRxFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rx frames"
|
|
::= { rcCfmFlrStatsCurrEntry 27}
|
|
|
|
rcCfmFlrStatsCurrFlFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Frame Loss frames"
|
|
::= { rcCfmFlrStatsCurrEntry 28}
|
|
|
|
rcCfmFlrStatsCurrTxFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Far-end Tx frames"
|
|
::= { rcCfmFlrStatsCurrEntry 29}
|
|
|
|
rcCfmFlrStatsCurrRxFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Far-end Rx frames"
|
|
::= { rcCfmFlrStatsCurrEntry 30}
|
|
|
|
rcCfmFlrStatsCurrFlFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Far-end Frame Loss frames"
|
|
::= { rcCfmFlrStatsCurrEntry 31}
|
|
|
|
rcCfmFlrStatsCurrSamplesPerInterval OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples per interval"
|
|
::= { rcCfmFlrStatsCurrEntry 32}
|
|
|
|
rcCfmFlrStatsCurrSamplesTransmitted OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples transmitted"
|
|
::= { rcCfmFlrStatsCurrEntry 33}
|
|
|
|
rcCfmFlrStatsCurrMinFlFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Minimum sample Frame Loss frames"
|
|
::= { rcCfmFlrStatsCurrEntry 34}
|
|
|
|
rcCfmFlrStatsCurrSamplesNotSent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples not sent"
|
|
::= { rcCfmFlrStatsCurrEntry 35}
|
|
|
|
rcCfmFlrStatsCurrSamplesReceived OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples received"
|
|
::= { rcCfmFlrStatsCurrEntry 36}
|
|
|
|
rcCfmFlrStatsCurrMinFlFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Minimum sample Far-end Frame Loss frames"
|
|
::= { rcCfmFlrStatsCurrEntry 37}
|
|
|
|
rcCfmFlrStatsCurrMaxFlFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maximum sample Frame Loss frames"
|
|
::= { rcCfmFlrStatsCurrEntry 38}
|
|
|
|
rcCfmFlrStatsCurrMaxFlFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maximum sample Far-end Frame Loss frames"
|
|
::= { rcCfmFlrStatsCurrEntry 39}
|
|
|
|
-- Frame Loss Ratio Stats History Table
|
|
|
|
rcCfmFlrStatsHistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmFlrStatsHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Loss Ratio Stats History"
|
|
::= { rcCfm 25}
|
|
|
|
rcCfmFlrStatsHistEntry OBJECT-TYPE
|
|
SYNTAX RcCfmFlrStatsHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Loss Ratio Stats History entry."
|
|
INDEX { rcCfmFlrStatsHistMdIndex,
|
|
rcCfmFlrStatsHistMaIndex,
|
|
rcCfmFlrStatsHistMepId,
|
|
rcCfmFlrStatsHistRmepId,
|
|
rcCfmFlrStatsHistPriorityIndex,
|
|
rcCfmFlrStatsHistIndex }
|
|
::= { rcCfmFlrStatsHistTable 1}
|
|
|
|
RcCfmFlrStatsHistEntry ::=
|
|
SEQUENCE {
|
|
rcCfmFlrStatsHistMdIndex Integer32,
|
|
rcCfmFlrStatsHistMaIndex Integer32,
|
|
rcCfmFlrStatsHistMepId Integer32,
|
|
rcCfmFlrStatsHistRmepId Integer32,
|
|
rcCfmFlrStatsHistPriorityIndex Integer32,
|
|
rcCfmFlrStatsHistIndex Integer32,
|
|
rcCfmFlrStatsHistMdName DisplayString,
|
|
rcCfmFlrStatsHistMaName DisplayString,
|
|
rcCfmFlrStatsHistPriority Integer32,
|
|
rcCfmFlrStatsHistStatus INTEGER,
|
|
rcCfmFlrStatsHistStartTime OCTET STRING ,
|
|
rcCfmFlrStatsHistEndTime OCTET STRING ,
|
|
rcCfmFlrStatsHistHistInterval Gauge32,
|
|
rcCfmFlrStatsHistSampleRate Gauge32,
|
|
rcCfmFlrStatsHistNearEndPercent Integer32,
|
|
rcCfmFlrStatsHistNearEndSubPercent Integer32,
|
|
rcCfmFlrStatsHistFarEndPercent Integer32,
|
|
rcCfmFlrStatsHistFarEndSubPercent Integer32,
|
|
rcCfmFlrStatsHistMinNearEndPercent Integer32,
|
|
rcCfmFlrStatsHistMinNearEndSubPercent Integer32,
|
|
rcCfmFlrStatsHistMinFarEndPercent Integer32,
|
|
rcCfmFlrStatsHistMinFarEndSubPercent Integer32,
|
|
rcCfmFlrStatsHistMaxNearEndPercent Integer32,
|
|
rcCfmFlrStatsHistMaxNearEndSubPercent Integer32,
|
|
rcCfmFlrStatsHistMaxFarEndPercent Integer32,
|
|
rcCfmFlrStatsHistMaxFarEndSubPercent Integer32,
|
|
rcCfmFlrStatsHistTxFrames Counter64,
|
|
rcCfmFlrStatsHistRxFrames Counter64,
|
|
rcCfmFlrStatsHistFlFrames Counter64,
|
|
rcCfmFlrStatsHistTxFarEndFrames Counter64,
|
|
rcCfmFlrStatsHistRxFarEndFrames Counter64,
|
|
rcCfmFlrStatsHistFlFarEndFrames Counter64,
|
|
rcCfmFlrStatsHistSamplesPerInterval Gauge32,
|
|
rcCfmFlrStatsHistSamplesTransmitted Gauge32,
|
|
rcCfmFlrStatsHistMinFlFrames Counter32,
|
|
rcCfmFlrStatsHistSamplesNotSent Gauge32,
|
|
rcCfmFlrStatsHistSamplesReceived Gauge32,
|
|
rcCfmFlrStatsHistMinFlFarEndFrames Counter32,
|
|
rcCfmFlrStatsHistMaxFlFrames Counter32,
|
|
rcCfmFlrStatsHistMaxFlFarEndFrames Counter32
|
|
}
|
|
|
|
rcCfmFlrStatsHistMdIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFlrStatsHistEntry 1}
|
|
|
|
rcCfmFlrStatsHistMaIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFlrStatsHistEntry 2}
|
|
|
|
rcCfmFlrStatsHistMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmFlrStatsHistEntry 3}
|
|
|
|
rcCfmFlrStatsHistRmepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Peer Identifier which matches a RemoteMepId.
|
|
The performance monitoring pair is MepId-RmepId"
|
|
::= { rcCfmFlrStatsHistEntry 4}
|
|
|
|
rcCfmFlrStatsHistPriorityIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "priorityIndex equals priority plus 1 - priority can't be
|
|
used as an index since it starts from 0"
|
|
::= { rcCfmFlrStatsHistEntry 5}
|
|
|
|
rcCfmFlrStatsHistIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History Index"
|
|
::= { rcCfmFlrStatsHistEntry 6}
|
|
|
|
rcCfmFlrStatsHistMdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFlrStatsHistEntry 7}
|
|
|
|
rcCfmFlrStatsHistMaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFlrStatsHistEntry 8}
|
|
|
|
rcCfmFlrStatsHistPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Frame Loss Ratio messaging runs on COS priority"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmFlrStatsHistEntry 9}
|
|
|
|
rcCfmFlrStatsHistStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
complete(1),
|
|
incomplete(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this history interval."
|
|
::= {rcCfmFlrStatsHistEntry 10}
|
|
|
|
rcCfmFlrStatsHistStartTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time stamp."
|
|
::= { rcCfmFlrStatsHistEntry 11}
|
|
|
|
rcCfmFlrStatsHistEndTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time stamp."
|
|
::= { rcCfmFlrStatsHistEntry 12}
|
|
|
|
rcCfmFlrStatsHistHistInterval OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Interval"
|
|
::= { rcCfmFlrStatsHistEntry 13}
|
|
|
|
rcCfmFlrStatsHistSampleRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sample rate in seconds"
|
|
::= { rcCfmFlrStatsHistEntry 14}
|
|
|
|
rcCfmFlrStatsHistNearEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsHistEntry 15}
|
|
|
|
rcCfmFlrStatsHistNearEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsHistEntry 16}
|
|
|
|
rcCfmFlrStatsHistFarEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured far-end FLR percentage"
|
|
::= { rcCfmFlrStatsHistEntry 17}
|
|
|
|
rcCfmFlrStatsHistFarEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured far-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsHistEntry 18}
|
|
|
|
rcCfmFlrStatsHistMinNearEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsHistEntry 19}
|
|
|
|
rcCfmFlrStatsHistMinNearEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsHistEntry 20}
|
|
|
|
rcCfmFlrStatsHistMinFarEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsHistEntry 21}
|
|
|
|
rcCfmFlrStatsHistMinFarEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsHistEntry 22}
|
|
|
|
rcCfmFlrStatsHistMaxNearEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsHistEntry 23}
|
|
|
|
rcCfmFlrStatsHistMaxNearEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsHistEntry 24}
|
|
|
|
rcCfmFlrStatsHistMaxFarEndPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR percentage"
|
|
::= { rcCfmFlrStatsHistEntry 25}
|
|
|
|
rcCfmFlrStatsHistMaxFarEndSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured near-end FLR sub percentage"
|
|
::= { rcCfmFlrStatsHistEntry 26}
|
|
|
|
rcCfmFlrStatsHistTxFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Tx frames"
|
|
::= { rcCfmFlrStatsHistEntry 27}
|
|
|
|
rcCfmFlrStatsHistRxFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Rx frames"
|
|
::= { rcCfmFlrStatsHistEntry 28}
|
|
|
|
rcCfmFlrStatsHistFlFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Frame Loss frames"
|
|
::= { rcCfmFlrStatsHistEntry 29}
|
|
|
|
rcCfmFlrStatsHistTxFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Far-end Tx frames"
|
|
::= { rcCfmFlrStatsHistEntry 30}
|
|
|
|
rcCfmFlrStatsHistRxFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Far-end Rx frames"
|
|
::= { rcCfmFlrStatsHistEntry 31}
|
|
|
|
rcCfmFlrStatsHistFlFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Far-end Frame Loss frames"
|
|
::= { rcCfmFlrStatsHistEntry 32}
|
|
|
|
rcCfmFlrStatsHistSamplesPerInterval OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples per interval"
|
|
::= { rcCfmFlrStatsHistEntry 33}
|
|
|
|
rcCfmFlrStatsHistSamplesTransmitted OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples transmitted"
|
|
::= { rcCfmFlrStatsHistEntry 34}
|
|
|
|
rcCfmFlrStatsHistMinFlFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Minimum sample Frame Loss frames"
|
|
::= { rcCfmFlrStatsHistEntry 35}
|
|
|
|
rcCfmFlrStatsHistSamplesNotSent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples not sent"
|
|
::= { rcCfmFlrStatsHistEntry 36}
|
|
|
|
rcCfmFlrStatsHistSamplesReceived OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples received"
|
|
::= { rcCfmFlrStatsHistEntry 37}
|
|
|
|
rcCfmFlrStatsHistMinFlFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Minimum sample Far-end Frame Loss frames"
|
|
::= { rcCfmFlrStatsHistEntry 38}
|
|
|
|
rcCfmFlrStatsHistMaxFlFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maximum sample Frame Loss frames"
|
|
::= { rcCfmFlrStatsHistEntry 39}
|
|
|
|
rcCfmFlrStatsHistMaxFlFarEndFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maximum sample Far-end Frame Loss frames"
|
|
::= { rcCfmFlrStatsHistEntry 40}
|
|
|
|
-- Frame Delay Stats Info Table
|
|
|
|
rcCfmFdStatsInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmFdStatsInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Delay Stats Info"
|
|
::= { rcCfm 26}
|
|
|
|
rcCfmFdStatsInfoEntry OBJECT-TYPE
|
|
SYNTAX RcCfmFdStatsInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Frame Delay Stats Info entry."
|
|
INDEX { rcCfmFdStatsInfoMdIndex,
|
|
rcCfmFdStatsInfoMaIndex,
|
|
rcCfmFdStatsInfoMepId,
|
|
rcCfmFdStatsInfoRmepId,
|
|
rcCfmFdStatsInfoPriorityIndex }
|
|
::= { rcCfmFdStatsInfoTable 1}
|
|
|
|
RcCfmFdStatsInfoEntry ::=
|
|
SEQUENCE {
|
|
rcCfmFdStatsInfoMdIndex Integer32,
|
|
rcCfmFdStatsInfoMaIndex Integer32,
|
|
rcCfmFdStatsInfoMepId Integer32,
|
|
rcCfmFdStatsInfoRmepId Integer32,
|
|
rcCfmFdStatsInfoPriorityIndex Integer32,
|
|
rcCfmFdStatsInfoMdName DisplayString,
|
|
rcCfmFdStatsInfoMaName DisplayString,
|
|
rcCfmFdStatsInfoPriority Integer32,
|
|
rcCfmFdStatsInfoFdPercent Integer32,
|
|
rcCfmFdStatsInfoFdSubPercent Integer32,
|
|
rcCfmFdStatsInfoFdvPercent Integer32,
|
|
rcCfmFdStatsInfoFdvSubPercent Integer32,
|
|
rcCfmFdStatsInfoPmOperState RcCfmPmOperState
|
|
}
|
|
|
|
rcCfmFdStatsInfoMdIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFdStatsInfoEntry 1}
|
|
|
|
rcCfmFdStatsInfoMaIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFdStatsInfoEntry 2}
|
|
|
|
rcCfmFdStatsInfoMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmFdStatsInfoEntry 3}
|
|
|
|
rcCfmFdStatsInfoRmepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Peer Identifier which matches a RemoteMepId.
|
|
The performance monitoring pair is MepId-RmepId"
|
|
::= { rcCfmFdStatsInfoEntry 4}
|
|
|
|
rcCfmFdStatsInfoPriorityIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "priorityIndex equals priority plus 1 - priority can't be
|
|
used as an index since it starts from 0"
|
|
::= { rcCfmFdStatsInfoEntry 5}
|
|
|
|
rcCfmFdStatsInfoMdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFdStatsInfoEntry 6}
|
|
|
|
rcCfmFdStatsInfoMaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFdStatsInfoEntry 7}
|
|
|
|
rcCfmFdStatsInfoPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Frame Delay messaging runs on COS priority"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmFdStatsInfoEntry 8}
|
|
|
|
rcCfmFdStatsInfoFdPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FD percentage"
|
|
::= { rcCfmFdStatsInfoEntry 9}
|
|
|
|
rcCfmFdStatsInfoFdSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FD sub percentage"
|
|
::= { rcCfmFdStatsInfoEntry 10}
|
|
|
|
rcCfmFdStatsInfoFdvPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FDV percentage"
|
|
::= { rcCfmFdStatsInfoEntry 11}
|
|
|
|
rcCfmFdStatsInfoFdvSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FDV sub percentage"
|
|
::= { rcCfmFdStatsInfoEntry 12}
|
|
|
|
rcCfmFdStatsInfoPmOperState OBJECT-TYPE
|
|
SYNTAX RcCfmPmOperState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of the PM."
|
|
::= {rcCfmFdStatsInfoEntry 13}
|
|
|
|
-- Frame Delay Stats Current Table
|
|
|
|
rcCfmFdStatsCurrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmFdStatsCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Delay Stats Current"
|
|
::= { rcCfm 27}
|
|
|
|
rcCfmFdStatsCurrEntry OBJECT-TYPE
|
|
SYNTAX RcCfmFdStatsCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Delay Stats Current entry."
|
|
INDEX { rcCfmFdStatsCurrMdIndex,
|
|
rcCfmFdStatsCurrMaIndex,
|
|
rcCfmFdStatsCurrMepId,
|
|
rcCfmFdStatsCurrRmepId,
|
|
rcCfmFdStatsCurrPriorityIndex }
|
|
::= { rcCfmFdStatsCurrTable 1}
|
|
|
|
RcCfmFdStatsCurrEntry ::=
|
|
SEQUENCE {
|
|
rcCfmFdStatsCurrMdIndex Integer32,
|
|
rcCfmFdStatsCurrMaIndex Integer32,
|
|
rcCfmFdStatsCurrMepId Integer32,
|
|
rcCfmFdStatsCurrRmepId Integer32,
|
|
rcCfmFdStatsCurrPriorityIndex Integer32,
|
|
rcCfmFdStatsCurrMdName DisplayString,
|
|
rcCfmFdStatsCurrMaName DisplayString,
|
|
rcCfmFdStatsCurrPriority Integer32,
|
|
rcCfmFdStatsCurrFdPercent Integer32,
|
|
rcCfmFdStatsCurrFdSubPercent Integer32,
|
|
rcCfmFdStatsCurrFdvPercent Integer32,
|
|
rcCfmFdStatsCurrFdvSubPercent Integer32,
|
|
rcCfmFdStatsCurrPmOperState RcCfmPmOperState,
|
|
rcCfmFdStatsCurrStartTime OCTET STRING ,
|
|
rcCfmFdStatsCurrEndTime OCTET STRING ,
|
|
rcCfmFdStatsCurrHistInterval Gauge32,
|
|
rcCfmFdStatsCurrSampleRate Gauge32,
|
|
rcCfmFdStatsCurrTarget Counter32,
|
|
rcCfmFdStatsCurrAverage Counter32,
|
|
rcCfmFdStatsCurrMinimum Counter32,
|
|
rcCfmFdStatsCurrMaximum Counter32,
|
|
rcCfmFdStatsCurrFdvTarget Counter32,
|
|
rcCfmFdStatsCurrFdvAverage Counter32,
|
|
rcCfmFdStatsCurrFdvMinimum Counter32,
|
|
rcCfmFdStatsCurrFdvMaximum Counter32,
|
|
rcCfmFdStatsCurrSamplesPerInterval Gauge32,
|
|
rcCfmFdStatsCurrSamplesTransmitted Gauge32,
|
|
rcCfmFdStatsCurrSamplesNotSent Gauge32,
|
|
rcCfmFdStatsCurrSamplesReceived Gauge32
|
|
}
|
|
|
|
rcCfmFdStatsCurrMdIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFdStatsCurrEntry 1}
|
|
|
|
rcCfmFdStatsCurrMaIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFdStatsCurrEntry 2}
|
|
|
|
rcCfmFdStatsCurrMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmFdStatsCurrEntry 3}
|
|
|
|
rcCfmFdStatsCurrRmepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Peer Identifier which matches a RemoteMepId.
|
|
The performance monitoring pair is MepId-RmepId"
|
|
::= { rcCfmFdStatsCurrEntry 4}
|
|
|
|
rcCfmFdStatsCurrPriorityIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "priorityIndex equals priority plus 1 - priority can't be
|
|
used as an index since it starts from 0"
|
|
::= { rcCfmFdStatsCurrEntry 5}
|
|
|
|
rcCfmFdStatsCurrMdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFdStatsCurrEntry 6}
|
|
|
|
rcCfmFdStatsCurrMaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFdStatsCurrEntry 7}
|
|
|
|
rcCfmFdStatsCurrPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Frame Delay messaaging runs on COS priority"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmFdStatsCurrEntry 8}
|
|
|
|
rcCfmFdStatsCurrFdPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FD percentage"
|
|
::= { rcCfmFdStatsCurrEntry 9}
|
|
|
|
rcCfmFdStatsCurrFdSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FD sub percentage"
|
|
::= { rcCfmFdStatsCurrEntry 10}
|
|
|
|
rcCfmFdStatsCurrFdvPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FDV percentage"
|
|
::= { rcCfmFdStatsCurrEntry 11}
|
|
|
|
rcCfmFdStatsCurrFdvSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FDV sub percentage"
|
|
::= { rcCfmFdStatsCurrEntry 12}
|
|
|
|
rcCfmFdStatsCurrPmOperState OBJECT-TYPE
|
|
SYNTAX RcCfmPmOperState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operational state of the PM."
|
|
::= {rcCfmFdStatsCurrEntry 13}
|
|
|
|
rcCfmFdStatsCurrStartTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time stamp."
|
|
::= { rcCfmFdStatsCurrEntry 14}
|
|
|
|
rcCfmFdStatsCurrEndTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time stamp."
|
|
::= { rcCfmFdStatsCurrEntry 15}
|
|
|
|
rcCfmFdStatsCurrHistInterval OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Interval"
|
|
::= { rcCfmFdStatsCurrEntry 16}
|
|
|
|
rcCfmFdStatsCurrSampleRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sample rate in seconds"
|
|
::= { rcCfmFdStatsCurrEntry 17}
|
|
|
|
rcCfmFdStatsCurrTarget OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FD target in microseconds"
|
|
::= { rcCfmFdStatsCurrEntry 18}
|
|
|
|
rcCfmFdStatsCurrAverage OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FD average in microseconds"
|
|
::= { rcCfmFdStatsCurrEntry 19}
|
|
|
|
rcCfmFdStatsCurrMinimum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FD minimum in microseconds"
|
|
::= { rcCfmFdStatsCurrEntry 20}
|
|
|
|
rcCfmFdStatsCurrMaximum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FD maximum in microseconds"
|
|
::= { rcCfmFdStatsCurrEntry 21}
|
|
|
|
rcCfmFdStatsCurrFdvTarget OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FDV target in microseconds"
|
|
::= { rcCfmFdStatsCurrEntry 22}
|
|
|
|
rcCfmFdStatsCurrFdvAverage OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FDV average in microseconds"
|
|
::= { rcCfmFdStatsCurrEntry 23}
|
|
|
|
rcCfmFdStatsCurrFdvMinimum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FDV minimum in microseconds"
|
|
::= { rcCfmFdStatsCurrEntry 24}
|
|
|
|
rcCfmFdStatsCurrFdvMaximum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FDV maximum in microseconds"
|
|
::= { rcCfmFdStatsCurrEntry 25}
|
|
|
|
rcCfmFdStatsCurrSamplesPerInterval OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples per interval"
|
|
::= { rcCfmFdStatsCurrEntry 26}
|
|
|
|
rcCfmFdStatsCurrSamplesTransmitted OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples transmitted"
|
|
::= { rcCfmFdStatsCurrEntry 27}
|
|
|
|
rcCfmFdStatsCurrSamplesNotSent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples not sent"
|
|
::= { rcCfmFdStatsCurrEntry 28}
|
|
|
|
rcCfmFdStatsCurrSamplesReceived OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples received"
|
|
::= { rcCfmFdStatsCurrEntry 29}
|
|
|
|
|
|
-- Frame Delay Stats History Table
|
|
|
|
rcCfmFdStatsHistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmFdStatsHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Delay Stats History"
|
|
::= { rcCfm 28}
|
|
|
|
rcCfmFdStatsHistEntry OBJECT-TYPE
|
|
SYNTAX RcCfmFdStatsHistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Frame Delay Stats History entry."
|
|
INDEX { rcCfmFdStatsHistMdIndex,
|
|
rcCfmFdStatsHistMaIndex,
|
|
rcCfmFdStatsHistMepId,
|
|
rcCfmFdStatsHistRmepId,
|
|
rcCfmFdStatsHistPriorityIndex}
|
|
::= { rcCfmFdStatsHistTable 1}
|
|
|
|
RcCfmFdStatsHistEntry ::=
|
|
SEQUENCE {
|
|
rcCfmFdStatsHistMdIndex Integer32,
|
|
rcCfmFdStatsHistMaIndex Integer32,
|
|
rcCfmFdStatsHistMepId Integer32,
|
|
rcCfmFdStatsHistRmepId Integer32,
|
|
rcCfmFdStatsHistPriorityIndex Integer32,
|
|
rcCfmFdStatsHistIndex Integer32,
|
|
rcCfmFdStatsHistMdName DisplayString,
|
|
rcCfmFdStatsHistMaName DisplayString,
|
|
rcCfmFdStatsHistPriority Integer32,
|
|
rcCfmFdStatsHistFdPercent Integer32,
|
|
rcCfmFdStatsHistFdSubPercent Integer32,
|
|
rcCfmFdStatsHistFdvPercent Integer32,
|
|
rcCfmFdStatsHistFdvSubPercent Integer32,
|
|
rcCfmFdStatsHistStatus INTEGER,
|
|
rcCfmFdStatsHistStartTime OCTET STRING ,
|
|
rcCfmFdStatsHistEndTime OCTET STRING ,
|
|
rcCfmFdStatsHistHistInterval Gauge32,
|
|
rcCfmFdStatsHistSampleRate Gauge32,
|
|
rcCfmFdStatsHistTarget Counter32,
|
|
rcCfmFdStatsHistAverage Counter32,
|
|
rcCfmFdStatsHistMinimum Counter32,
|
|
rcCfmFdStatsHistMaximum Counter32,
|
|
rcCfmFdStatsHistFdvTarget Counter32,
|
|
rcCfmFdStatsHistFdvAverage Counter32,
|
|
rcCfmFdStatsHistFdvMinimum Counter32,
|
|
rcCfmFdStatsHistFdvMaximum Counter32,
|
|
rcCfmFdStatsHistSamplesPerInterval Gauge32,
|
|
rcCfmFdStatsHistSamplesTransmitted Gauge32,
|
|
rcCfmFdStatsHistSamplesNotSent Gauge32,
|
|
rcCfmFdStatsHistSamplesReceived Gauge32
|
|
}
|
|
|
|
rcCfmFdStatsHistMdIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFdStatsHistEntry 1}
|
|
|
|
rcCfmFdStatsHistMaIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFdStatsHistEntry 2}
|
|
|
|
rcCfmFdStatsHistMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmFdStatsHistEntry 3}
|
|
|
|
rcCfmFdStatsHistRmepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Peer Identifier which matches a RemoteMepId.
|
|
The performance monitoring pair is MepId-RmepId"
|
|
::= { rcCfmFdStatsHistEntry 4}
|
|
|
|
rcCfmFdStatsHistPriorityIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "priorityIndex equals priority plus 1 - priority can't be
|
|
used as an index since it starts from 0"
|
|
::= { rcCfmFdStatsHistEntry 5}
|
|
|
|
rcCfmFdStatsHistIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1000)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "History Index"
|
|
::= { rcCfmFdStatsHistEntry 6}
|
|
|
|
rcCfmFdStatsHistMdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmFdStatsHistEntry 7}
|
|
|
|
rcCfmFdStatsHistMaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmFdStatsHistEntry 8}
|
|
|
|
rcCfmFdStatsHistPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Frame Delay messaging runs on COS priority"
|
|
DEFVAL { 7 }
|
|
::= { rcCfmFdStatsHistEntry 9}
|
|
|
|
rcCfmFdStatsHistFdPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FD percentage"
|
|
::= { rcCfmFdStatsHistEntry 10}
|
|
|
|
rcCfmFdStatsHistFdSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FD sub percentage"
|
|
::= { rcCfmFdStatsHistEntry 11}
|
|
|
|
rcCfmFdStatsHistFdvPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FDV percentage"
|
|
::= { rcCfmFdStatsHistEntry 12}
|
|
|
|
rcCfmFdStatsHistFdvSubPercent OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Measured FDV sub percentage"
|
|
::= { rcCfmFdStatsHistEntry 13}
|
|
|
|
rcCfmFdStatsHistStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
complete(1),
|
|
incomplete(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this history interval."
|
|
::= {rcCfmFdStatsHistEntry 14}
|
|
|
|
rcCfmFdStatsHistStartTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time stamp."
|
|
::= { rcCfmFdStatsHistEntry 15}
|
|
|
|
rcCfmFdStatsHistEndTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The date and time stamp."
|
|
::= { rcCfmFdStatsHistEntry 16}
|
|
|
|
rcCfmFdStatsHistHistInterval OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "History Interval"
|
|
::= { rcCfmFdStatsHistEntry 17}
|
|
|
|
rcCfmFdStatsHistSampleRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sample rate in seconds"
|
|
::= { rcCfmFdStatsHistEntry 18}
|
|
|
|
rcCfmFdStatsHistTarget OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FD target in microseconds"
|
|
::= { rcCfmFdStatsHistEntry 19}
|
|
|
|
rcCfmFdStatsHistAverage OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FD average in microseconds"
|
|
::= { rcCfmFdStatsHistEntry 20}
|
|
|
|
rcCfmFdStatsHistMinimum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FD minimum in microseconds"
|
|
::= { rcCfmFdStatsHistEntry 21}
|
|
|
|
rcCfmFdStatsHistMaximum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FD maximum in microseconds"
|
|
::= { rcCfmFdStatsHistEntry 22}
|
|
|
|
rcCfmFdStatsHistFdvTarget OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FDV target in microseconds"
|
|
::= { rcCfmFdStatsHistEntry 23}
|
|
|
|
rcCfmFdStatsHistFdvAverage OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FDV average in microseconds"
|
|
::= { rcCfmFdStatsHistEntry 24}
|
|
|
|
rcCfmFdStatsHistFdvMinimum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FDV minimum in microseconds"
|
|
::= { rcCfmFdStatsHistEntry 25}
|
|
|
|
rcCfmFdStatsHistFdvMaximum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "FDV maximum in microseconds"
|
|
::= { rcCfmFdStatsHistEntry 26}
|
|
|
|
rcCfmFdStatsHistSamplesPerInterval OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples per interval"
|
|
::= { rcCfmFdStatsHistEntry 27}
|
|
|
|
rcCfmFdStatsHistSamplesTransmitted OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples transmitted"
|
|
::= { rcCfmFdStatsHistEntry 28}
|
|
|
|
rcCfmFdStatsHistSamplesNotSent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples not sent"
|
|
::= { rcCfmFdStatsHistEntry 29}
|
|
|
|
rcCfmFdStatsHistSamplesReceived OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Samples received"
|
|
::= { rcCfmFdStatsHistEntry 30}
|
|
|
|
|
|
-- Performance Monitoring Configuration Table
|
|
|
|
rcCfmPmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmPmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Performance Monitoring Configuration"
|
|
::= { rcCfm 29}
|
|
|
|
rcCfmPmEntry OBJECT-TYPE
|
|
SYNTAX RcCfmPmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Performance Monitoring entry."
|
|
INDEX {rcCfmPmMdIndex, rcCfmPmMaIndex, rcCfmPmMepId, rcCfmPmRmepId }
|
|
::= { rcCfmPmTable 1}
|
|
|
|
RcCfmPmEntry ::=
|
|
SEQUENCE {
|
|
rcCfmPmMdIndex Integer32,
|
|
rcCfmPmMaIndex Integer32,
|
|
rcCfmPmMepId Integer32,
|
|
rcCfmPmRmepId Integer32,
|
|
rcCfmPmMdName DisplayString,
|
|
rcCfmPmMaName DisplayString,
|
|
rcCfmPmRowStatus RowStatus,
|
|
rcCfmPmState EnableValue,
|
|
rcCfmPmFdList DisplayString,
|
|
rcCfmPmFdSize Integer32,
|
|
rcCfmPmFlrList DisplayString,
|
|
rcCfmPmFlrSize Integer32,
|
|
rcCfmPmHistoryInterval INTEGER,
|
|
rcCfmPmSampleRate INTEGER
|
|
}
|
|
|
|
rcCfmPmMdIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmPmEntry 1}
|
|
|
|
rcCfmPmMaIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmPmEntry 2}
|
|
|
|
rcCfmPmMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmPmEntry 3}
|
|
|
|
rcCfmPmRmepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Remote Maintenance Endpoint ID.
|
|
The performance monitoring pair is MepId-RmepId"
|
|
::= { rcCfmPmEntry 4}
|
|
|
|
rcCfmPmMdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmPmEntry 5}
|
|
|
|
rcCfmPmMaName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmPmEntry 6}
|
|
|
|
rcCfmPmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries"
|
|
::= { rcCfmPmEntry 7 }
|
|
|
|
rcCfmPmState OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Performance Monitoring State"
|
|
DEFVAL { disable }
|
|
::= { rcCfmPmEntry 8 }
|
|
|
|
rcCfmPmFdList OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..200))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Comma separated list of Frame-Delay profile names.
|
|
Valid profile names must first be created using rcCfmFdProfileName.
|
|
Number of entries in the list is indicated by rcCfmPmFdSize."
|
|
::= { rcCfmPmEntry 9 }
|
|
|
|
rcCfmPmFdSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Frame-Delay profiles names"
|
|
::= { rcCfmPmEntry 10 }
|
|
|
|
rcCfmPmFlrList OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..200))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Comma separated list of Frame-Loss-Ratio profile names.
|
|
Valid profile names must first be created using rcCfmFlrProfileName.
|
|
Number of entries in the list is indicated by rcCfmPmFlrSize."
|
|
::= { rcCfmPmEntry 11 }
|
|
|
|
rcCfmPmFlrSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of FLR profile names in FLR list"
|
|
::= { rcCfmPmEntry 12 }
|
|
|
|
rcCfmPmHistoryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hi5(5),
|
|
hi15(15),
|
|
hi30(30),
|
|
hi60(60),
|
|
hi120(120),
|
|
hi360(360),
|
|
hi720(720),
|
|
hi1440(1440)
|
|
}
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "History summary interval in minutes"
|
|
DEFVAL { hi15 }
|
|
::= { rcCfmPmEntry 13}
|
|
|
|
rcCfmPmSampleRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
si1(1),
|
|
si10(10),
|
|
si30(30),
|
|
si60(60),
|
|
si900(900),
|
|
si1800(1800),
|
|
si3600(3600)
|
|
}
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Sample rate once per sample interval specified in seconds"
|
|
DEFVAL { si30 }
|
|
::= { rcCfmPmEntry 14}
|
|
|
|
-- Linktrace Reply Table
|
|
|
|
CfmRelayActionFieldValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible values the Relay action field can take."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:g, 20.36.2.5, 21.9.5, and
|
|
Table 21-27"
|
|
SYNTAX INTEGER {
|
|
rlyHit (1),
|
|
rlyFdb (2),
|
|
rlyMpdb (3),
|
|
unknown (4)
|
|
}
|
|
|
|
CfmIngressActionFieldValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible values returned in the ingress action field."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:g, 20.36.2.6, 21.9.8.1, and
|
|
Table 21-30"
|
|
SYNTAX INTEGER {
|
|
ingOk (1),
|
|
ingDown (2),
|
|
ingBlocked (3),
|
|
ingVid (4),
|
|
ingNoTlv (5)
|
|
}
|
|
|
|
CfmEgressActionFieldValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible values returned in the egress action field"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:o, 20.36.2.10, 21.9.9.1, and
|
|
Table 21-32"
|
|
SYNTAX INTEGER {
|
|
egrOk (1),
|
|
egrDown (2),
|
|
egrBlocked (3),
|
|
egrVid (4),
|
|
egrNoTlv (5)
|
|
}
|
|
|
|
LldpPortIdSubtype ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the source of a particular type of Port
|
|
identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)'
|
|
represents a port identifier based on the ifAlias MIB object,
|
|
defined in IETF RFC 2863. The enumeration 'portComponent(2)'
|
|
represents a port identifier based on the value of
|
|
entPhysicalAlias (defined in IETF RFC 2737) for a port component
|
|
(i.e., entPhysicalClass value of 'port(10)'), within the
|
|
containing chassis. The enumeration 'macAddress(3)' represents a
|
|
port identifier based on a unicast source address (encoded in
|
|
network byte order and IEEE 802.3 canonical bit order), which has
|
|
been detected by the agent and associated with a particular port
|
|
(IEEE Std 802-2001). The enumeration 'networkAddress(4)' represents
|
|
a port identifier based on a network address, detected by the
|
|
agent and associated with a particular port. The enumeration
|
|
'interfaceName(5)' represents a port identifier based on the
|
|
ifName MIB object, defined in IETF RFC 2863. The enumeration
|
|
'agentCircuitId(6)' represents a port identifier based on the
|
|
agent-local identifier of the circuit (defined in RFC 3046),
|
|
detected by the agent and associated with a particular port. The
|
|
enumeration 'local(7)' represents a port identifier based on a
|
|
value locally assigned."
|
|
SYNTAX INTEGER {
|
|
interfaceAlias(1),
|
|
portComponent(2),
|
|
macAddress(3),
|
|
networkAddress(4),
|
|
interfaceName(5),
|
|
agentCircuitId(6),
|
|
local(7)
|
|
}
|
|
|
|
LldpPortId ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1a"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the format of a port identifier string.
|
|
Objects of this type are always used with an associated
|
|
LldpPortIdSubtype object, which identifies the format of the
|
|
particular LldpPortId object instance. If the associated
|
|
LldpPortIdSubtype object has a value of
|
|
'342/200/230interfaceAlias(1)', then the octet string identifies
|
|
a particular instance of the ifAlias object (defined in IETF RFC
|
|
2863). If the particular ifAlias object does not contain any
|
|
values, another port identifier type should be used. If the
|
|
associated LldpPortIdSubtype object has a value of
|
|
'portComponent(2)', then the octet string identifies a particular
|
|
instance of the entPhysicalAlias object (defined in IETF RFC 2737)
|
|
for a port or backplane component. If the associated
|
|
LldpPortIdSubtype object has a value of 'macAddress(3)', then
|
|
this string identifies a Particular unicast source address
|
|
(encoded in network byte order and IEEE 802.3 canonical bit order)
|
|
associated with the port (IEEE Std 802-2001). If the associated
|
|
LldpPortIdSubtype object has a value of 'networkAddress(4)', then
|
|
this string identifies a Network address associated with the port.
|
|
The first octet contains the IANA AddressFamilyNumbers enumeration
|
|
value for the specific address type, and octets 2 through N
|
|
contain the networkAddress address value in network byte order. If
|
|
the associated LldpPortIdSubtype object has a value of
|
|
'interfaceName(5)', then the octet string identifies A particular
|
|
instance of the ifName object (defined in IETF RFC 2863). If the
|
|
particular ifName object does not contain any values, another port
|
|
identifier type should be used. If the associated ldpPortIdSubtype
|
|
object has a value of 'agentCircuitId(6)', then this string
|
|
identifies a agent-local identifier of the circuit (defined in RFC
|
|
3046). If the associated LldpPortIdSubtype object has a value of
|
|
'342/200/230local(7)', then this string identifies a locally
|
|
assigned port ID."
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
|
|
-- The Linktrace Reply Table
|
|
|
|
|
|
rcCfmLtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmLtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of Linktrace replies received
|
|
by a specific MEP in response to a linktrace message."
|
|
::= { rcCfm 32}
|
|
|
|
rcCfmLtrEntry OBJECT-TYPE
|
|
SYNTAX RcCfmLtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Linktrace Reply table entry."
|
|
INDEX {rcCfmLtrDomainIndex, rcCfmLtrAssociationIndex,
|
|
rcCfmLtrMepId, rcCfmLtrSeqNumber, rcCfmLtrTtl,
|
|
rcCfmLtrReceiveOrder}
|
|
::= { rcCfmLtrTable 1}
|
|
|
|
RcCfmLtrEntry ::=
|
|
SEQUENCE {
|
|
rcCfmLtrDomainIndex Integer32,
|
|
rcCfmLtrAssociationIndex Integer32,
|
|
rcCfmLtrMepId Integer32,
|
|
rcCfmLtrSeqNumber Integer32,
|
|
rcCfmLtrTtl Integer32,
|
|
rcCfmLtrReceiveOrder Integer32,
|
|
rcCfmLtrDomainName DisplayString,
|
|
rcCfmLtrAssociationName DisplayString,
|
|
rcCfmLtrForwarded TruthValue,
|
|
rcCfmLtrTerminalMep TruthValue,
|
|
rcCfmLtrLastEgressIdentifier OCTET STRING,
|
|
rcCfmLtrNextEgressIdentifier OCTET STRING,
|
|
rcCfmLtrRelayAction CfmRelayActionFieldValue,
|
|
rcCfmLtrSrcMac MacAddress,
|
|
rcCfmLtrIngressAction CfmIngressActionFieldValue,
|
|
rcCfmLtrIngressMac MacAddress,
|
|
rcCfmLtrIngressPortIdSubtype LldpPortIdSubtype,
|
|
rcCfmLtrIngressPortId LldpPortId,
|
|
rcCfmLtrEgressAction CfmEgressActionFieldValue,
|
|
rcCfmLtrEgressMac MacAddress,
|
|
rcCfmLtrEgressPortIdSubtype LldpPortIdSubtype,
|
|
rcCfmLtrEgressPortId LldpPortId
|
|
}
|
|
rcCfmLtrDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Index"
|
|
::= { rcCfmLtrEntry 1}
|
|
|
|
rcCfmLtrAssociationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Index"
|
|
::= { rcCfmLtrEntry 2}
|
|
|
|
rcCfmLtrMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmLtrEntry 3}
|
|
|
|
rcCfmLtrSeqNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transaction identifier/sequence number returned by a
|
|
previous transmit linkrace message command, indicating which
|
|
LTM's response is going to be returned."
|
|
::= { rcCfmLtrEntry 4}
|
|
|
|
rcCfmLtrTtl OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ttl field value for a returned LTR."
|
|
::= { rcCfmLtrEntry 5}
|
|
|
|
rcCfmLtrReceiveOrder OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple LTRs with the same
|
|
LTR Transaction Identifier field value. This value is
|
|
assigned sequentially from 1, in the order that the Linktrace
|
|
Initiator received the LTRs."
|
|
::= { rcCfmLtrEntry 6}
|
|
|
|
rcCfmLtrDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmLtrEntry 7}
|
|
|
|
rcCfmLtrAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmLtrEntry 8}
|
|
|
|
rcCfmLtrForwarded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if a LTM was forwarded by the responding MP, as
|
|
returned in the 'FwdYes' flag of the flags field."
|
|
::= { rcCfmLtrEntry 9}
|
|
|
|
rcCfmLtrTerminalMep OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A boolean value stating whether the forwarded LTM reached
|
|
a MEP enclosing its MA, as returned in the Terminal MEP flag
|
|
of the Flags field."
|
|
::= { rcCfmLtrEntry 10}
|
|
|
|
rcCfmLtrLastEgressIdentifier OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet field holding the Last Egress Identifier returned
|
|
in the LTR Egress Identifier TLV of the LTR. The Last Egress
|
|
Identifier identifies the MEP Linktrace Indicator that
|
|
originated, or the Linktrace Responder that forwarded, the LTM
|
|
to which this LTR is the response. This is the same value as
|
|
the Egress Identifier TLV of that LTM."
|
|
::= { rcCfmLtrEntry 11}
|
|
|
|
|
|
rcCfmLtrNextEgressIdentifier OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet field holding the Next Egress Identifier returned in
|
|
the LTR Egress Identifier TLV of the LTR. The Next Egress
|
|
Identifier Identifies the Linktrace Responder that transmitted
|
|
this LTR, and can forward the LTM to the next hop. This is the
|
|
same value as the Egress Identifier TLV of the forwarded LTM,
|
|
if any. If the FwdYes bit of the Flags field is false, the
|
|
contents of this field are undefined, and the field is ignored
|
|
by the receiver."
|
|
::= { rcCfmLtrEntry 12}
|
|
|
|
rcCfmLtrRelayAction OBJECT-TYPE
|
|
SYNTAX CfmRelayActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Value returned in the Relay Action field."
|
|
DEFVAL { unknown }
|
|
::= { rcCfmLtrEntry 13}
|
|
|
|
|
|
rcCfmLtrSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address of the MP that respond to the LTM request for
|
|
this LTR"
|
|
::= { rcCfmLtrEntry 14}
|
|
|
|
rcCfmLtrIngressAction OBJECT-TYPE
|
|
SYNTAX CfmIngressActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value returned in the Ingress Action Field of the LTM.
|
|
The value ingNoTlv(5) indicates that no Reply Ingress TLV
|
|
was returned in the LTM."
|
|
::= { rcCfmLtrEntry 15}
|
|
|
|
rcCfmLtrIngressMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address returned in the ingress MAC address field. If the
|
|
rcCfmLtrIngress object contains the value ingNoTlv(5), then
|
|
the contents of this object are meaningless."
|
|
::= { rcCfmLtrEntry 16}
|
|
|
|
rcCfmLtrIngressPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the Ingress Port ID. If the rcCfmLtrIngress object
|
|
contains the value ingNoTlv(5), then the contents of this
|
|
object are meaningless."
|
|
::= { rcCfmLtrEntry 17}
|
|
|
|
rcCfmLtrIngressPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ingress Port ID. The format of this object is determined by
|
|
the value of the rcCfmLtrIngressPortIdSubtype object. If the
|
|
rcCfmLtrIngress object contains the value ingNoTlv(5), then
|
|
the contents of this object are meaningless."
|
|
::= { rcCfmLtrEntry 18}
|
|
|
|
rcCfmLtrEgressAction OBJECT-TYPE
|
|
SYNTAX CfmEgressActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value returned in the Egress Action Field of the LTM. The
|
|
value egrNoTlv(5) indicates that no Reply Egress TLV was
|
|
returned in the LTM."
|
|
::= { rcCfmLtrEntry 19}
|
|
|
|
rcCfmLtrEgressMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address returned in the egress MAC address field. If the
|
|
rcCfmLtrEgress object contains the value egrNoTlv(5), then the
|
|
contents of this object are meaningless."
|
|
::= { rcCfmLtrEntry 20}
|
|
|
|
rcCfmLtrEgressPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the Egress Port ID. If the rcCfmLtrEgress object
|
|
contains the value egrNoTlv(5), then the contents of this
|
|
object are meaningless."
|
|
::= { rcCfmLtrEntry 21}
|
|
|
|
rcCfmLtrEgressPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Egress Port ID. The format of this object is determined by
|
|
the value of the rcCfmLtrEgressPortIdSubtype object. If the
|
|
rcCfmLtrEgress object contains the value egrNoTlv(5), then
|
|
the contents of this object are meaningless."
|
|
::= { rcCfmLtrEntry 22}
|
|
|
|
-- The Linktrace Reply Table
|
|
|
|
rcCfmLtrReplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmLtrReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of Linktrace replies received
|
|
by a specific MEP in response to a linktrace message."
|
|
::= { rcCfm 33}
|
|
|
|
rcCfmLtrReplyEntry OBJECT-TYPE
|
|
SYNTAX RcCfmLtrReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Linktrace Reply table entry."
|
|
INDEX {rcCfmLtrReplyDomainIndex,
|
|
rcCfmLtrReplyAssociationIndex,
|
|
rcCfmLtrReplyMepId,
|
|
rcCfmLtrReplySeqNumber,
|
|
rcCfmLtrReplyHop,
|
|
rcCfmLtrReplyReceiveOrder}
|
|
::= { rcCfmLtrReplyTable 1}
|
|
|
|
RcCfmLtrReplyEntry ::=
|
|
SEQUENCE {
|
|
rcCfmLtrReplyDomainIndex Integer32,
|
|
rcCfmLtrReplyAssociationIndex Integer32,
|
|
rcCfmLtrReplyMepId Integer32,
|
|
rcCfmLtrReplySeqNumber Integer32,
|
|
rcCfmLtrReplyHop Integer32,
|
|
rcCfmLtrReplyReceiveOrder Integer32,
|
|
rcCfmLtrReplyTtl Integer32,
|
|
rcCfmLtrReplyDomainName DisplayString,
|
|
rcCfmLtrReplyAssociationName DisplayString,
|
|
rcCfmLtrReplyForwarded TruthValue,
|
|
rcCfmLtrReplyTerminalMep TruthValue,
|
|
rcCfmLtrReplyLastEgressIdentifier OCTET STRING,
|
|
rcCfmLtrReplyNextEgressIdentifier OCTET STRING,
|
|
rcCfmLtrReplyRelayAction CfmRelayActionFieldValue,
|
|
rcCfmLtrReplySrcMac MacAddress,
|
|
rcCfmLtrReplyIngressAction CfmIngressActionFieldValue,
|
|
rcCfmLtrReplyIngressMac MacAddress,
|
|
rcCfmLtrReplyIngressPortIdSubtype LldpPortIdSubtype,
|
|
rcCfmLtrReplyIngressPortId LldpPortId,
|
|
rcCfmLtrReplyEgressAction CfmEgressActionFieldValue,
|
|
rcCfmLtrReplyEgressMac MacAddress,
|
|
rcCfmLtrReplyEgressPortIdSubtype LldpPortIdSubtype,
|
|
rcCfmLtrReplyEgressPortId LldpPortId
|
|
}
|
|
rcCfmLtrReplyDomainIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Index"
|
|
::= { rcCfmLtrReplyEntry 1}
|
|
|
|
rcCfmLtrReplyAssociationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Index"
|
|
::= { rcCfmLtrReplyEntry 2}
|
|
|
|
rcCfmLtrReplyMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Maintenance EndPoint ID"
|
|
::= { rcCfmLtrReplyEntry 3}
|
|
|
|
rcCfmLtrReplySeqNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transaction identifier/sequence number returned by a
|
|
previous transmit linktrace message command, indicating which
|
|
LTM's response is going to be returned."
|
|
DEFVAL {0}
|
|
::= { rcCfmLtrReplyEntry 4}
|
|
|
|
rcCfmLtrReplyHop OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The number of hops away from LTM initiator"
|
|
::= { rcCfmLtrReplyEntry 5}
|
|
|
|
rcCfmLtrReplyReceiveOrder OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple LTRs with the same
|
|
LTR Transaction Identifier field value. This value is
|
|
assigned sequentially from 1, in the order that the Linktrace
|
|
Initiator received the LTRs."
|
|
::= { rcCfmLtrReplyEntry 6}
|
|
|
|
rcCfmLtrReplyTtl OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ttl field value for a returned LTR."
|
|
::= { rcCfmLtrReplyEntry 7}
|
|
|
|
rcCfmLtrReplyDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Domain Name"
|
|
::= { rcCfmLtrReplyEntry 8}
|
|
|
|
rcCfmLtrReplyAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..22))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Maintenance Association Name"
|
|
::= { rcCfmLtrReplyEntry 9}
|
|
|
|
rcCfmLtrReplyForwarded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if a LTM was forwarded by the responding MP, as
|
|
returned in the 'FwdYes' flag of the flags field."
|
|
::= { rcCfmLtrReplyEntry 10}
|
|
|
|
rcCfmLtrReplyTerminalMep OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A boolean value stating whether the forwarded LTM reached
|
|
a MEP enclosing its MA, as returned in the Terminal MEP flag
|
|
of the Flags field."
|
|
::= { rcCfmLtrReplyEntry 11}
|
|
|
|
rcCfmLtrReplyLastEgressIdentifier OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet field holding the Last Egress Identifier returned
|
|
in the LTR Egress Identifier TLV of the LTR. The Last Egress
|
|
Identifier identifies the MEP Linktrace Indicator that
|
|
originated, or the Linktrace Responder that forwarded, the LTM
|
|
to which this LTR is the response. This is the same value as
|
|
the Egress Identifier TLV of that LTM."
|
|
::= { rcCfmLtrReplyEntry 12}
|
|
|
|
|
|
rcCfmLtrReplyNextEgressIdentifier OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet field holding the Next Egress Identifier returned in
|
|
the LTR Egress Identifier TLV of the LTR. The Next Egress
|
|
Identifier Identifies the Linktrace Responder that transmitted
|
|
this LTR, and can forward the LTM to the next hop. This is the
|
|
same value as the Egress Identifier TLV of the forwarded LTM,
|
|
if any. If the FwdYes bit of the Flags field is false, the
|
|
contents of this field are undefined, and the field is ignored
|
|
by the receiver."
|
|
::= { rcCfmLtrReplyEntry 13}
|
|
|
|
rcCfmLtrReplyRelayAction OBJECT-TYPE
|
|
SYNTAX CfmRelayActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Value returned in the Relay Action field."
|
|
DEFVAL { unknown }
|
|
::= { rcCfmLtrReplyEntry 14}
|
|
|
|
|
|
rcCfmLtrReplySrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address of the MP that respond to the LTM request for
|
|
this LTR"
|
|
::= { rcCfmLtrReplyEntry 15}
|
|
|
|
rcCfmLtrReplyIngressAction OBJECT-TYPE
|
|
SYNTAX CfmIngressActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value returned in the Ingress Action Field of the LTM.
|
|
The value ingNoTlv(5) indicates that no Reply Ingress TLV
|
|
was returned in the LTM."
|
|
::= { rcCfmLtrReplyEntry 16}
|
|
|
|
rcCfmLtrReplyIngressMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address returned in the ingress MAC address field. If the
|
|
rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then
|
|
the contents of this object are meaningless."
|
|
::= { rcCfmLtrReplyEntry 17}
|
|
|
|
rcCfmLtrReplyIngressPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the Ingress Port ID. If the rcCfmLtrReplyIngress
|
|
object contains the value ingNoTlv(5), then the contents of
|
|
this object are meaningless."
|
|
::= { rcCfmLtrReplyEntry 18}
|
|
|
|
rcCfmLtrReplyIngressPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ingress Port ID. The format of this object is determined by
|
|
the value of the rcCfmLtrReplyIngressPortIdSubtype object.
|
|
If the rcCfmLtrReplyIngress object contains the value
|
|
ingNoTlv(5), then
|
|
the contents of this object are meaningless."
|
|
::= { rcCfmLtrReplyEntry 19}
|
|
|
|
rcCfmLtrReplyEgressAction OBJECT-TYPE
|
|
SYNTAX CfmEgressActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value returned in the Egress Action Field of the LTM. The
|
|
value egrNoTlv(5) indicates that no Reply Egress TLV was
|
|
returned in the LTM."
|
|
::= { rcCfmLtrReplyEntry 20}
|
|
|
|
rcCfmLtrReplyEgressMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address returned in the egress MAC address field. If the
|
|
rcCfmLtrReplyEgress object contains the value egrNoTlv(5),
|
|
then the contents of this object are meaningless."
|
|
::= { rcCfmLtrReplyEntry 21}
|
|
|
|
rcCfmLtrReplyEgressPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the Egress Port ID. If the rcCfmLtrReplyEgress
|
|
object contains the value egrNoTlv(5), then the contents
|
|
of this object are meaningless."
|
|
::= { rcCfmLtrReplyEntry 22}
|
|
|
|
rcCfmLtrReplyEgressPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Egress Port ID. The format of this object is determined by
|
|
the value of the rcCfmLtrReplyEgressPortIdSubtype object.
|
|
If the rcCfmLtrReplyEgress object contains the value
|
|
egrNoTlv(5), then the contents of this object are meaningless."
|
|
::= { rcCfmLtrReplyEntry 23}
|
|
|
|
-- The Transmit L2Ping Table
|
|
|
|
rcCfmTransmitL2PingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmTransmitL2PingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management transmit L2Ping table"
|
|
::= { rcCfm 34}
|
|
|
|
rcCfmTransmitL2PingEntry OBJECT-TYPE
|
|
SYNTAX RcCfmTransmitL2PingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance EndPoint L2Ping entry."
|
|
INDEX {rcCfmTransmitL2PingVlanId }
|
|
::= { rcCfmTransmitL2PingTable 1}
|
|
|
|
RcCfmTransmitL2PingEntry ::=
|
|
SEQUENCE {
|
|
rcCfmTransmitL2PingVlanId Integer32,
|
|
rcCfmTransmitL2PingDestMacAddress MacAddress,
|
|
rcCfmTransmitL2PingHostName OCTET STRING,
|
|
rcCfmTransmitL2PingDestIsHostName TruthValue,
|
|
rcCfmTransmitL2PingMessages Integer32,
|
|
rcCfmTransmitL2PingPriority Integer32,
|
|
rcCfmTransmitL2PingTimeoutInt Integer32,
|
|
rcCfmTransmitL2PingTestPattern INTEGER,
|
|
rcCfmTransmitL2PingDataSize Integer32,
|
|
rcCfmTransmitL2PingFrameSize Integer32,
|
|
rcCfmTransmitL2PingSourceMode INTEGER,
|
|
rcCfmTransmitL2PingSeqNumber Integer32,
|
|
rcCfmTransmitL2PingResultOk TruthValue,
|
|
rcCfmTransmitL2PingStatus INTEGER,
|
|
rcCfmTransmitL2PingResult DisplayString
|
|
}
|
|
|
|
rcCfmTransmitL2PingVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Customer Vlan"
|
|
::= { rcCfmTransmitL2PingEntry 1}
|
|
|
|
rcCfmTransmitL2PingDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An indication of the target MAC Address field to be transmitted"
|
|
::= { rcCfmTransmitL2PingEntry 2}
|
|
|
|
rcCfmTransmitL2PingHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The target host name"
|
|
::= { rcCfmTransmitL2PingEntry 3}
|
|
|
|
rcCfmTransmitL2PingDestIsHostName OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "True indicates that the host name is used for L2Ping transmission"
|
|
::= { rcCfmTransmitL2PingEntry 4}
|
|
|
|
rcCfmTransmitL2PingMessages OBJECT-TYPE
|
|
SYNTAX Integer32(1..200)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of L2Ping messages to be transmitted."
|
|
|
|
DEFVAL {1}
|
|
::= { rcCfmTransmitL2PingEntry 5}
|
|
|
|
rcCfmTransmitL2PingPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Priority. 3 bit value to be used in the VLAN hdr,
|
|
if present in the transmitted frame."
|
|
DEFVAL {7}
|
|
::= { rcCfmTransmitL2PingEntry 6}
|
|
|
|
rcCfmTransmitL2PingTimeoutInt OBJECT-TYPE
|
|
SYNTAX Integer32(1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interval to wait for an L2Ping time-out with a
|
|
range of (1..10) seconds with a default value of 3
|
|
seconds."
|
|
DEFVAL {3}
|
|
::= { rcCfmTransmitL2PingEntry 7}
|
|
|
|
rcCfmTransmitL2PingTestPattern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allZero(1),
|
|
allZeroCrc(2),
|
|
pseudoRandomBitSequence(3),
|
|
pseudoRandomBitSequenceCrc(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The test pattern to use in the L2Ping PDU with range of
|
|
values namely allZero, allZeroCrc,
|
|
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
|
|
and with a default value of allZero.
|
|
value meaning
|
|
-------- -------
|
|
allZero(1) Null signal without CRC-32
|
|
allZeroCrc(2) Null signal with CRC-32
|
|
pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32
|
|
pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32"
|
|
DEFVAL {allZero}
|
|
::= { rcCfmTransmitL2PingEntry 8}
|
|
|
|
rcCfmTransmitL2PingDataSize OBJECT-TYPE
|
|
SYNTAX Integer32(0..400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An arbitrary amount of data to be included in the data TLV, if the
|
|
Data Size is selected to be sent."
|
|
DEFVAL {0}
|
|
::= { rcCfmTransmitL2PingEntry 9}
|
|
|
|
rcCfmTransmitL2PingFrameSize OBJECT-TYPE
|
|
SYNTAX Integer32(0..9600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If the frame size is specified then the data size
|
|
shall be internally calculated and the calculated data
|
|
size shall be included in the data TLV."
|
|
DEFVAL {0}
|
|
::= { rcCfmTransmitL2PingEntry 10}
|
|
|
|
rcCfmTransmitL2PingSourceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nodal(1),
|
|
smltVirtual(2),
|
|
noVlanMac(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source modes of the transmit loopback service. "
|
|
DEFVAL {nodal}
|
|
::= { rcCfmTransmitL2PingEntry 11}
|
|
|
|
|
|
rcCfmTransmitL2PingSeqNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The transaction identifier/sequence number of the first loopback
|
|
message (to be) sent."
|
|
DEFVAL {0}
|
|
::= { rcCfmTransmitL2PingEntry 12}
|
|
|
|
rcCfmTransmitL2PingResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the result of the operation:
|
|
-true. The L2Ping Message(s) will be (or have been) sent.
|
|
-false. The L2Ping Message(s) will not be sent."
|
|
DEFVAL {true}
|
|
::= { rcCfmTransmitL2PingEntry 13}
|
|
|
|
rcCfmTransmitL2PingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
transmit(2),
|
|
abort(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Status of the transmit loopback service:
|
|
-ready. The service is available.
|
|
-transmit. The service is transmitting, or about to
|
|
transmit, the L2Ping messages.
|
|
-abort The service is aborted or about to abort
|
|
the L2Ping messages.
|
|
|
|
This column will also be used to avoid concurrency or
|
|
race condition problems that could occur if two or
|
|
more management entities try to
|
|
use the service at the same time. "
|
|
REFERENCE "Delete notReady status due to CR Q01482201"
|
|
DEFVAL {ready}
|
|
::= { rcCfmTransmitL2PingEntry 14}
|
|
|
|
rcCfmTransmitL2PingResult OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..799))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Display the L2Ping result."
|
|
::= { rcCfmTransmitL2PingEntry 15}
|
|
|
|
|
|
-- The Transmit L2Trace Table
|
|
|
|
rcCfmTransmitL2TraceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmTransmitL2TraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management transmit L2Trace table"
|
|
::= { rcCfm 35}
|
|
|
|
rcCfmTransmitL2TraceEntry OBJECT-TYPE
|
|
SYNTAX RcCfmTransmitL2TraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management Maintenance EndPoint L2Trace entry."
|
|
INDEX {rcCfmTransmitL2TraceVlanId }
|
|
::= { rcCfmTransmitL2TraceTable 1}
|
|
|
|
RcCfmTransmitL2TraceEntry ::=
|
|
SEQUENCE {
|
|
rcCfmTransmitL2TraceVlanId Integer32,
|
|
rcCfmTransmitL2TracePriority Integer32,
|
|
rcCfmTransmitL2TraceDestMacAddress MacAddress,
|
|
rcCfmTransmitL2TraceHostName OCTET STRING,
|
|
rcCfmTransmitL2TraceIsid Integer32,
|
|
rcCfmTransmitL2TraceNickName DisplayString,
|
|
rcCfmTransmitL2TraceDestIsHostName TruthValue,
|
|
rcCfmTransmitL2TraceIsidTree TruthValue,
|
|
rcCfmTransmitL2TraceTtl Integer32,
|
|
rcCfmTransmitL2TraceSourceMode INTEGER,
|
|
rcCfmTransmitL2TraceSeqNumber Integer32,
|
|
rcCfmTransmitL2TraceResultOk TruthValue,
|
|
rcCfmTransmitL2TraceStatus INTEGER,
|
|
rcCfmTransmitL2TraceFlag INTEGER
|
|
}
|
|
|
|
rcCfmTransmitL2TraceVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Customer Vlan"
|
|
::= { rcCfmTransmitL2TraceEntry 1}
|
|
|
|
rcCfmTransmitL2TracePriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Priority. 3 bit value to be used in the VLAN hdr,
|
|
if present in the transmitted frame."
|
|
DEFVAL {7}
|
|
::= { rcCfmTransmitL2TraceEntry 2}
|
|
|
|
rcCfmTransmitL2TraceDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "An indication of the target MAC Address field to be transmitted"
|
|
::= { rcCfmTransmitL2TraceEntry 3}
|
|
|
|
rcCfmTransmitL2TraceHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The target host name"
|
|
::= { rcCfmTransmitL2TraceEntry 4}
|
|
|
|
rcCfmTransmitL2TraceIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Isid Id"
|
|
::= { rcCfmTransmitL2TraceEntry 5}
|
|
|
|
rcCfmTransmitL2TraceNickName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (7))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Local Node nick name"
|
|
::= { rcCfmTransmitL2TraceEntry 6}
|
|
|
|
rcCfmTransmitL2TraceDestIsHostName OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "True indicates that the host name is used for L2Trace transmission"
|
|
::= { rcCfmTransmitL2TraceEntry 7}
|
|
|
|
rcCfmTransmitL2TraceIsidTree OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "True indicates that the multicast tree will be traced.
|
|
False indicates that the unicast path will be traced"
|
|
::= { rcCfmTransmitL2TraceEntry 8}
|
|
|
|
rcCfmTransmitL2TraceTtl OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of hops remaining to this L2Trace.
|
|
Decremented by 1 by each Bridge that handles the L2Trace.
|
|
The decremented value is returned in the L2Trace. If 0
|
|
on output, the L2Trace is not transmitted to the next
|
|
hop. The value of the TTL Field in the L2Trace
|
|
transmitted by the originating MEP is controlled by a
|
|
Managed Object; The default value if none is
|
|
specified is 64."
|
|
DEFVAL {64}
|
|
::= { rcCfmTransmitL2TraceEntry 9}
|
|
|
|
|
|
rcCfmTransmitL2TraceSourceMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nodal(1),
|
|
smltVirtual(2),
|
|
noVlanMac(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Source modes of the transmit loopback service. "
|
|
DEFVAL {nodal}
|
|
::= { rcCfmTransmitL2TraceEntry 10}
|
|
|
|
rcCfmTransmitL2TraceSeqNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The transaction identifier/sequence number of the first loopback
|
|
message (to be) sent."
|
|
DEFVAL {0}
|
|
::= { rcCfmTransmitL2TraceEntry 11}
|
|
|
|
rcCfmTransmitL2TraceResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the result of the operation:
|
|
-true. The L2Trace Message(s) will be (or have been) sent.
|
|
-false. The L2Trace Message(s) will not be sent."
|
|
DEFVAL {true}
|
|
::= { rcCfmTransmitL2TraceEntry 12}
|
|
|
|
rcCfmTransmitL2TraceStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
transmit(2),
|
|
abort(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Status of the transmit loopback service:
|
|
-ready. The service is available.
|
|
-transmit. The service is transmitting, or about to
|
|
transmit, the L2Trace messages.
|
|
-abort The service is aborted or about to abort
|
|
the L2Trace messages.
|
|
|
|
This column will also be used to avoid concurrency or
|
|
race condition problems that could occur if two or
|
|
more management entities try to
|
|
use the service at the same time. "
|
|
REFERENCE "Delete notReady status due to CR Q01482201"
|
|
DEFVAL {ready}
|
|
::= { rcCfmTransmitL2TraceEntry 13}
|
|
|
|
rcCfmTransmitL2TraceFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
internalError(2),
|
|
invalidMac(3),
|
|
mepDisabled(4),
|
|
noL2TraceResponse(5),
|
|
l2TraceToOwnMepMac(6),
|
|
l2TraceComplete(7),
|
|
l2TraceLookupFailure(8),
|
|
l2TraceLeafNode(9),
|
|
l2TraceNotInTree(10),
|
|
l2TraceSmltNotPrimary(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2Trace result flag indicating L2Trace status or error code.
|
|
Each enum value represents a status or error case.
|
|
1 - No error
|
|
2 - L2Trace Internal Error
|
|
3 - Invalid Mac Address
|
|
4 - Mep must be enabled in order to perform L2Trace
|
|
5 - No L2Trace response received
|
|
6 - L2Trace to own Mep MAC is not sent
|
|
7 - L2Trace completed
|
|
8 - Lookup failure for L2Trace
|
|
9 - On a leaf node in the i-sid tree
|
|
10 - Not in the i-sid tree
|
|
11 - Requested SMLT Source from Non-Primary Node"
|
|
|
|
|
|
::= { rcCfmTransmitL2TraceEntry 14}
|
|
|
|
-- L2Trace Reply Table
|
|
|
|
rcCfmL2TraceReplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmL2TraceReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of l2trace replies received
|
|
by a specific MEP in response to a linktrace message."
|
|
::= { rcCfm 36}
|
|
|
|
rcCfmL2TraceReplyEntry OBJECT-TYPE
|
|
SYNTAX RcCfmL2TraceReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Linktrace Reply table entry."
|
|
INDEX {rcCfmL2TraceReplyVlanId,rcCfmL2TraceReplySeqNumber,
|
|
rcCfmL2TraceReplyHop,rcCfmL2TraceReplyReceiveOrder}
|
|
::= { rcCfmL2TraceReplyTable 1}
|
|
|
|
RcCfmL2TraceReplyEntry ::=
|
|
SEQUENCE {
|
|
rcCfmL2TraceReplyVlanId Integer32,
|
|
rcCfmL2TraceReplySeqNumber Integer32,
|
|
rcCfmL2TraceReplyHop Integer32,
|
|
rcCfmL2TraceReplyReceiveOrder Integer32,
|
|
rcCfmL2TraceReplyTtl Integer32,
|
|
rcCfmL2TraceReplySrcMac MacAddress,
|
|
rcCfmL2TraceReplyHostName OCTET STRING,
|
|
rcCfmL2TraceReplyLastSrcMac MacAddress,
|
|
rcCfmL2TraceReplyLastHostName OCTET STRING
|
|
}
|
|
|
|
rcCfmL2TraceReplyVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the Customer Vlan"
|
|
::= {rcCfmL2TraceReplyEntry 1}
|
|
|
|
rcCfmL2TraceReplySeqNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transaction identifier/sequence number returned by a
|
|
previous transmit linktrace message command, indicating which
|
|
L2Trace's response is going to be returned."
|
|
DEFVAL {0}
|
|
::= { rcCfmL2TraceReplyEntry 2}
|
|
|
|
rcCfmL2TraceReplyHop OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The number of hops away from L2Trace initiator."
|
|
::= { rcCfmL2TraceReplyEntry 3}
|
|
|
|
rcCfmL2TraceReplyReceiveOrder OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple L2Trace responses
|
|
with the same Transaction Identifier field value. This value
|
|
is assigned sequentially from 1, in the order that the
|
|
Linktrace Initiator received the responses."
|
|
::= { rcCfmL2TraceReplyEntry 4}
|
|
|
|
rcCfmL2TraceReplyTtl OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ttl field value for a returned L2Trace response."
|
|
::= { rcCfmL2TraceReplyEntry 5}
|
|
|
|
rcCfmL2TraceReplySrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address of the MP that respond to the L2Trace request for
|
|
this L2traceReply"
|
|
::= { rcCfmL2TraceReplyEntry 6}
|
|
|
|
rcCfmL2TraceReplyHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The host name of the replying node"
|
|
::= { rcCfmL2TraceReplyEntry 7}
|
|
|
|
rcCfmL2TraceReplyLastSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the node that forwarded the L2Trace to the responding node"
|
|
::= { rcCfmL2TraceReplyEntry 8}
|
|
|
|
rcCfmL2TraceReplyLastHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The host name of the node that forwarded the L2Trace to the responding node"
|
|
::= { rcCfmL2TraceReplyEntry 9}
|
|
|
|
-- The Transmit L2 Ip Ping Table
|
|
|
|
rcCfmTransmitL2IpPingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmTransmitL2IpPingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management transmit L2IpPing table"
|
|
::= { rcCfm 37}
|
|
|
|
rcCfmTransmitL2IpPingEntry OBJECT-TYPE
|
|
SYNTAX RcCfmTransmitL2IpPingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "L2IpPing entry."
|
|
INDEX {rcCfmTransmitL2IpPingIpAddrType,
|
|
rcCfmTransmitL2IpPingIpAddr}
|
|
::= { rcCfmTransmitL2IpPingTable 1}
|
|
|
|
RcCfmTransmitL2IpPingEntry ::=
|
|
SEQUENCE {
|
|
rcCfmTransmitL2IpPingIpAddrType InetAddressType,
|
|
rcCfmTransmitL2IpPingIpAddr InetAddress,
|
|
rcCfmTransmitL2IpPingVrfId Integer32,
|
|
rcCfmTransmitL2IpPingVrfName DisplayString,
|
|
rcCfmTransmitL2IpPingMessages Integer32,
|
|
rcCfmTransmitL2IpPingTimeoutInt Integer32,
|
|
rcCfmTransmitL2IpPingTestPattern INTEGER,
|
|
rcCfmTransmitL2IpPingDataSize Integer32,
|
|
rcCfmTransmitL2IpPingStatus INTEGER,
|
|
rcCfmTransmitL2IpPingResultOk TruthValue,
|
|
rcCfmTransmitL2IpPingPathsFound Integer32,
|
|
rcCfmTransmitL2IpPingRowStatus RowStatus
|
|
}
|
|
|
|
rcCfmTransmitL2IpPingIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address type of destination IP Address "
|
|
::= { rcCfmTransmitL2IpPingEntry 1 }
|
|
|
|
rcCfmTransmitL2IpPingIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP Address. Support ipv4 at this time"
|
|
::= { rcCfmTransmitL2IpPingEntry 2 }
|
|
|
|
rcCfmTransmitL2IpPingVrfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VRF ID "
|
|
::= { rcCfmTransmitL2IpPingEntry 3 }
|
|
|
|
rcCfmTransmitL2IpPingVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Name of the Virtual Router"
|
|
::= {rcCfmTransmitL2IpPingEntry 4 }
|
|
|
|
rcCfmTransmitL2IpPingMessages OBJECT-TYPE
|
|
SYNTAX Integer32(1..200)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The number of L2IpPing messages to be transmitted
|
|
per mac/vlan pair."
|
|
DEFVAL {1}
|
|
::= { rcCfmTransmitL2IpPingEntry 5}
|
|
|
|
rcCfmTransmitL2IpPingTimeoutInt OBJECT-TYPE
|
|
SYNTAX Integer32(1..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The interval to wait for an L2IpPing time-out with a
|
|
range of (1..10) seconds with a default value of 3
|
|
seconds."
|
|
DEFVAL {3}
|
|
::= { rcCfmTransmitL2IpPingEntry 6}
|
|
|
|
rcCfmTransmitL2IpPingTestPattern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allZero(1),
|
|
allZeroCrc(2),
|
|
pseudoRandomBitSequence(3),
|
|
pseudoRandomBitSequenceCrc(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The test pattern to use in the L2IpPing PDUs
|
|
with range of values namely allZero, allZeroCrc,
|
|
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
|
|
and with a default value of allZero.
|
|
value meaning
|
|
-------- -------
|
|
allZero(1) Null signal without CRC-32
|
|
allZeroCrc(2) Null signal with CRC-32
|
|
pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32
|
|
pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32"
|
|
DEFVAL {allZero}
|
|
::= { rcCfmTransmitL2IpPingEntry 7}
|
|
|
|
rcCfmTransmitL2IpPingDataSize OBJECT-TYPE
|
|
SYNTAX Integer32(0..400)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "An arbitrary amount of data to be included in the
|
|
data TLV, if the Data Size is selected to be sent."
|
|
DEFVAL {0}
|
|
::= { rcCfmTransmitL2IpPingEntry 8}
|
|
|
|
rcCfmTransmitL2IpPingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
transmit(2),
|
|
abort(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Status of the transmit loopback service:
|
|
-ready. The service is available.
|
|
-transmit. The service is transmitting, or about to
|
|
transmit, the L2IpPing messages.
|
|
-abort The service is aborted or about to abort
|
|
the L2IpPing messages.
|
|
|
|
This column will also be used to avoid concurrency or
|
|
race condition problems that could occur if two or
|
|
more management entities try to
|
|
use the service at the same time. "
|
|
REFERENCE "Delete notReady status due to CR Q01482201"
|
|
DEFVAL {ready}
|
|
::= { rcCfmTransmitL2IpPingEntry 9}
|
|
|
|
rcCfmTransmitL2IpPingResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the result of the operation:
|
|
-true. L2IpPing Message(s) will be/have been sent.
|
|
-false. L2IpPing Message(s) will not be sent."
|
|
DEFVAL {true}
|
|
::= { rcCfmTransmitL2IpPingEntry 10}
|
|
|
|
rcCfmTransmitL2IpPingPathsFound OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of paths found to execute l2ping command"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmTransmitL2IpPingEntry 11}
|
|
|
|
rcCfmTransmitL2IpPingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the
|
|
rcCfmTransmitL2IpPingTable. Deletion of an entry
|
|
in this table results in corresponding
|
|
rcCfmL2IpPingReplyTable entries being deleted."
|
|
::= { rcCfmTransmitL2IpPingEntry 12 }
|
|
|
|
-- L2 Ip Ping Reply Table
|
|
|
|
rcCfmL2IpPingReplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmL2IpPingReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of l2 ip ping replies received "
|
|
::= { rcCfm 38}
|
|
|
|
rcCfmL2IpPingReplyEntry OBJECT-TYPE
|
|
SYNTAX RcCfmL2IpPingReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The L2 Ip Ping Reply table entry."
|
|
INDEX {rcCfmL2IpPingReplyIpAddrType,
|
|
rcCfmL2IpPingReplyIpAddr,
|
|
rcCfmL2IpPingReplySendOrder}
|
|
::= { rcCfmL2IpPingReplyTable 1}
|
|
|
|
RcCfmL2IpPingReplyEntry ::=
|
|
SEQUENCE {
|
|
rcCfmL2IpPingReplyIpAddrType InetAddressType,
|
|
rcCfmL2IpPingReplyIpAddr InetAddress,
|
|
rcCfmL2IpPingReplySendOrder Integer32,
|
|
rcCfmL2IpPingReplyVrfId Integer32,
|
|
rcCfmL2IpPingReplyVlanId Integer32,
|
|
rcCfmL2IpPingReplyDestMacAddress MacAddress,
|
|
rcCfmL2IpPingReplyPortNum InterfaceIndex,
|
|
rcCfmL2IpPingReplyDestHostName OCTET STRING,
|
|
rcCfmL2IpPingReplySize Integer32,
|
|
rcCfmL2IpPingReplyPktsTx Integer32,
|
|
rcCfmL2IpPingReplyPktsRx Integer32,
|
|
rcCfmL2IpPingReplyPercentLossWhole Integer32,
|
|
rcCfmL2IpPingReplyPercentLossFract Integer32,
|
|
rcCfmL2IpPingReplyMinRoundTrip Integer32,
|
|
rcCfmL2IpPingReplyMaxRoundTrip Integer32,
|
|
rcCfmL2IpPingReplyRttAvgWhole Integer32,
|
|
rcCfmL2IpPingReplyRttAvgFract Integer32,
|
|
rcCfmL2IpPingReplyFlag INTEGER
|
|
}
|
|
|
|
rcCfmL2IpPingReplyIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address type of destination IP Address "
|
|
::= { rcCfmL2IpPingReplyEntry 1 }
|
|
|
|
rcCfmL2IpPingReplyIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP Address. Support ipv4 at this time"
|
|
::= { rcCfmL2IpPingReplyEntry 2 }
|
|
|
|
rcCfmL2IpPingReplySendOrder OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple L2Ping sessions
|
|
This value is assigned sequentially from 1. It denotes
|
|
order that sessions were sent. It correlates to the number
|
|
of paths found and stored in the rcCfmTransmitL2IpPingEntry."
|
|
::= { rcCfmL2IpPingReplyEntry 3}
|
|
|
|
rcCfmL2IpPingReplyVrfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VRF ID "
|
|
::= { rcCfmL2IpPingReplyEntry 4 }
|
|
|
|
rcCfmL2IpPingReplyVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan found from L3 lookup and used for transmission"
|
|
::= {rcCfmL2IpPingReplyEntry 5}
|
|
|
|
rcCfmL2IpPingReplyDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An indication of the target MAC Address transmitted"
|
|
::= { rcCfmL2IpPingReplyEntry 6}
|
|
|
|
rcCfmL2IpPingReplyPortNum OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Either the value '0', or the port number of the
|
|
port used for the l2ping. "
|
|
::= { rcCfmL2IpPingReplyEntry 7 }
|
|
|
|
rcCfmL2IpPingReplyDestHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The host name of the responding node"
|
|
::= { rcCfmL2IpPingReplyEntry 8}
|
|
|
|
rcCfmL2IpPingReplySize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..9600)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes of data sent"
|
|
DEFVAL {0}
|
|
::= { rcCfmL2IpPingReplyEntry 9}
|
|
|
|
rcCfmL2IpPingReplyPktsTx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Packets transmitted for this vlan/mac"
|
|
::= { rcCfmL2IpPingReplyEntry 10}
|
|
|
|
rcCfmL2IpPingReplyPktsRx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Number of Packets received for this vlan/mac"
|
|
::= { rcCfmL2IpPingReplyEntry 11}
|
|
|
|
rcCfmL2IpPingReplyPercentLossWhole OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Percentage of packet loss for this vlan/mac"
|
|
::= { rcCfmL2IpPingReplyEntry 12}
|
|
|
|
rcCfmL2IpPingReplyPercentLossFract OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Percentage of packet loss for this vlan/mac"
|
|
::= { rcCfmL2IpPingReplyEntry 13}
|
|
|
|
rcCfmL2IpPingReplyMinRoundTrip OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Min time for round-trip for this vlan/mac in us"
|
|
::= { rcCfmL2IpPingReplyEntry 14}
|
|
|
|
rcCfmL2IpPingReplyMaxRoundTrip OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Max time for round-trip for this vlan/mac in us"
|
|
::= { rcCfmL2IpPingReplyEntry 15}
|
|
|
|
rcCfmL2IpPingReplyRttAvgWhole OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Average time for round-trip for this vlan/mac in us"
|
|
::= { rcCfmL2IpPingReplyEntry 16}
|
|
|
|
rcCfmL2IpPingReplyRttAvgFract OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Fractional portion of Average time for round-trip"
|
|
::= { rcCfmL2IpPingReplyEntry 17}
|
|
|
|
rcCfmL2IpPingReplyFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
internalError(2),
|
|
invalidMac(3),
|
|
mepDisabled(4),
|
|
invalidMD(5),
|
|
invalidMA(6),
|
|
noMepFound(7),
|
|
unknownServiceInstance(8),
|
|
l2PingToOwnMepMac(9),
|
|
l2PingComplete(10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Result flag indicating status or error code.
|
|
Each enum value represents a status or error case.
|
|
1 - No error
|
|
2 - Internal Error
|
|
3 - Invalid Ip
|
|
4 - L2Trace completed
|
|
5 - Lookup failure for IP (no vlan/mac entries)"
|
|
::= { rcCfmL2IpPingReplyEntry 18}
|
|
|
|
-- The Transmit L2 Ip Trace Table
|
|
rcCfmTransmitL2IpTraceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmTransmitL2IpTraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Connectivity Fault Management transmit L2IpTrace table"
|
|
::= { rcCfm 39}
|
|
|
|
rcCfmTransmitL2IpTraceEntry OBJECT-TYPE
|
|
SYNTAX RcCfmTransmitL2IpTraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "L2IpTrace entry."
|
|
INDEX {rcCfmTransmitL2IpTraceIpAddrType,
|
|
rcCfmTransmitL2IpTraceIpAddr }
|
|
::= { rcCfmTransmitL2IpTraceTable 1}
|
|
|
|
RcCfmTransmitL2IpTraceEntry ::=
|
|
SEQUENCE {
|
|
rcCfmTransmitL2IpTraceIpAddrType InetAddressType,
|
|
rcCfmTransmitL2IpTraceIpAddr InetAddress,
|
|
rcCfmTransmitL2IpTraceVrfId Integer32,
|
|
rcCfmTransmitL2IpTraceVrfName DisplayString,
|
|
rcCfmTransmitL2IpTraceTtl Integer32,
|
|
rcCfmTransmitL2IpTraceStatus INTEGER,
|
|
rcCfmTransmitL2IpTraceResultOk TruthValue,
|
|
rcCfmTransmitL2IpTracePathsFound Integer32,
|
|
rcCfmTransmitL2IpTraceRowStatus RowStatus
|
|
}
|
|
|
|
rcCfmTransmitL2IpTraceIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address type of destination IP Address "
|
|
::= { rcCfmTransmitL2IpTraceEntry 1 }
|
|
|
|
rcCfmTransmitL2IpTraceIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP Address. Support ipv4 at this time"
|
|
::= { rcCfmTransmitL2IpTraceEntry 2 }
|
|
|
|
rcCfmTransmitL2IpTraceVrfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VRF ID "
|
|
::= { rcCfmTransmitL2IpTraceEntry 3 }
|
|
|
|
rcCfmTransmitL2IpTraceVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The Name of the Virtual Router"
|
|
::= {rcCfmTransmitL2IpTraceEntry 4 }
|
|
|
|
rcCfmTransmitL2IpTraceTtl OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The number of hops remaining to this L2Trace.
|
|
Decremented by 1 by each Bridge that handles the L2Trace.
|
|
The decremented value is returned in the L2Trace. If 0
|
|
on output, the L2Trace is not transmitted to the next
|
|
hop. The value of the TTL Field in the L2Trace
|
|
transmitted by the originating MEP is controlled by a
|
|
Managed Object; The default value if none is
|
|
specified is 64."
|
|
DEFVAL {64}
|
|
::= { rcCfmTransmitL2IpTraceEntry 5}
|
|
|
|
rcCfmTransmitL2IpTraceStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
transmit(2),
|
|
abort(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Status of the transmit loopback service:
|
|
-ready. The service is available.
|
|
-transmit. The service is transmitting, or about to
|
|
transmit, the L2Trace messages.
|
|
-abort The service is aborted or about to abort
|
|
the L2Trace messages.
|
|
|
|
This column will also be used to avoid concurrency or
|
|
race condition problems that could occur if two or
|
|
more management entities try to
|
|
use the service at the same time. "
|
|
REFERENCE "Delete notReady status due to CR Q01482201"
|
|
DEFVAL {ready}
|
|
::= { rcCfmTransmitL2IpTraceEntry 6}
|
|
|
|
rcCfmTransmitL2IpTraceResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the result of the operation:
|
|
-true. The Trace Message(s) will be/have been sent.
|
|
-false. The Trace Message(s) will not be sent."
|
|
DEFVAL {true}
|
|
::= { rcCfmTransmitL2IpTraceEntry 7}
|
|
|
|
rcCfmTransmitL2IpTracePathsFound OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of paths found to execute l2trace command"
|
|
DEFVAL { 0 }
|
|
::= { rcCfmTransmitL2IpTraceEntry 8}
|
|
|
|
rcCfmTransmitL2IpTraceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the
|
|
rcCfmTransmitL2IpTraceTable. Deletion of an entry
|
|
in this table results in corresponding
|
|
rcCfmL2IpTraceReplyTable entries being deleted."
|
|
::= { rcCfmTransmitL2IpTraceEntry 9 }
|
|
|
|
|
|
-- L2IpTrace Reply Table
|
|
|
|
rcCfmL2IpTraceReplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmL2IpTraceReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of l2 ip trace replies received
|
|
by a specific MEP in response to a linktrace message."
|
|
::= { rcCfm 40}
|
|
|
|
rcCfmL2IpTraceReplyEntry OBJECT-TYPE
|
|
SYNTAX RcCfmL2IpTraceReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The L2 Ip Trace Reply table entry."
|
|
INDEX {rcCfmL2IpTraceReplyIpAddrType,
|
|
rcCfmL2IpTraceReplyIpAddr,
|
|
rcCfmL2IpTraceReplySendOrder,
|
|
rcCfmL2IpTraceReplyHop,
|
|
rcCfmL2IpTraceReplyReceiveOrder}
|
|
::= { rcCfmL2IpTraceReplyTable 1}
|
|
|
|
RcCfmL2IpTraceReplyEntry ::=
|
|
SEQUENCE {
|
|
rcCfmL2IpTraceReplyIpAddrType InetAddressType,
|
|
rcCfmL2IpTraceReplyIpAddr InetAddress,
|
|
rcCfmL2IpTraceReplySendOrder Integer32,
|
|
rcCfmL2IpTraceReplyHop Integer32,
|
|
rcCfmL2IpTraceReplyReceiveOrder Integer32,
|
|
rcCfmL2IpTraceReplyTtl Integer32,
|
|
rcCfmL2IpTraceReplyVrfId Integer32,
|
|
rcCfmL2IpTraceReplyVlanId Integer32,
|
|
rcCfmL2IpTraceReplyDestMacAddress MacAddress,
|
|
rcCfmL2IpTraceReplyPortNum InterfaceIndex,
|
|
rcCfmL2IpTraceReplySeqNumber Integer32,
|
|
rcCfmL2IpTraceReplySrcMac MacAddress,
|
|
rcCfmL2IpTraceReplyHostName OCTET STRING,
|
|
rcCfmL2IpTraceReplyLastSrcMac MacAddress,
|
|
rcCfmL2IpTraceReplyLastHostName OCTET STRING,
|
|
rcCfmL2IpTraceReplyFlag INTEGER
|
|
}
|
|
|
|
rcCfmL2IpTraceReplyIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The address type of destination IP Address "
|
|
::= { rcCfmL2IpTraceReplyEntry 1 }
|
|
|
|
rcCfmL2IpTraceReplyIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Destination IP Address. Support ipv4 at this time"
|
|
::= { rcCfmL2IpTraceReplyEntry 2 }
|
|
|
|
rcCfmL2IpTraceReplySendOrder OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple L2Trace sessions
|
|
This value is assigned sequentially from 1. It denotes
|
|
order that sessions were sent. It correlates to the number
|
|
of paths found and stored in the rcCfmTransmitL2IpTraceEntry."
|
|
::= { rcCfmL2IpTraceReplyEntry 3}
|
|
|
|
rcCfmL2IpTraceReplyHop OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The number of L2 hops away from L2Trace initiator."
|
|
::= { rcCfmL2IpTraceReplyEntry 4}
|
|
|
|
rcCfmL2IpTraceReplyReceiveOrder OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple L2Trace responses
|
|
with the same Send Transaction Identifier field value.
|
|
This value is assigned sequentially from 1, in the order
|
|
that the Linktrace Initiator received the responses. A
|
|
zero value may be seen in error conditions"
|
|
::= { rcCfmL2IpTraceReplyEntry 5}
|
|
|
|
rcCfmL2IpTraceReplyTtl OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ttl field value for a returned L2Trace response."
|
|
::= { rcCfmL2IpTraceReplyEntry 6}
|
|
|
|
rcCfmL2IpTraceReplyVrfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VRF ID "
|
|
::= { rcCfmL2IpTraceReplyEntry 7}
|
|
|
|
rcCfmL2IpTraceReplyVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan found from L3 lookup and used for transmission"
|
|
::= {rcCfmL2IpTraceReplyEntry 8}
|
|
|
|
rcCfmL2IpTraceReplyDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An indication of the target MAC Address transmitted"
|
|
::= { rcCfmL2IpTraceReplyEntry 9}
|
|
|
|
rcCfmL2IpTraceReplySeqNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transaction identifier/sequence number used in
|
|
linktrace message packet"
|
|
DEFVAL {0}
|
|
::= { rcCfmL2IpTraceReplyEntry 10}
|
|
|
|
rcCfmL2IpTraceReplyPortNum OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Either the value '0', or the port number of the
|
|
port used for the l2trace. "
|
|
::= { rcCfmL2IpTraceReplyEntry 11 }
|
|
|
|
rcCfmL2IpTraceReplySrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address of the MP that responded to L2Trace request for
|
|
this L2traceReply"
|
|
::= { rcCfmL2IpTraceReplyEntry 12}
|
|
|
|
rcCfmL2IpTraceReplyHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The host name of the replying node"
|
|
::= { rcCfmL2IpTraceReplyEntry 13}
|
|
|
|
rcCfmL2IpTraceReplyLastSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the node that forwarded the
|
|
L2Trace to the responding node"
|
|
::= { rcCfmL2IpTraceReplyEntry 14}
|
|
|
|
rcCfmL2IpTraceReplyLastHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The host name of the node that forwarded the L2Trace
|
|
to the responding node"
|
|
::= { rcCfmL2IpTraceReplyEntry 15}
|
|
|
|
rcCfmL2IpTraceReplyFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
internalError(2),
|
|
invalidMac(3),
|
|
mepDisabled(4),
|
|
noL2TraceResponse(5),
|
|
l2TraceToOwnMepMac(6),
|
|
l2TraceComplete(7),
|
|
l2TraceLookupFailure(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2Trace result flag indicating status or error code.
|
|
Each enum value represents a status or error case.
|
|
1 - No error
|
|
2 - L2Trace Internal Error
|
|
3 - Invalid Mac Address
|
|
4 - Mep must be enabled in order to perform L2Trace
|
|
5 - No L2Trace response received
|
|
6 - L2Trace to own Mep MAC is not sent
|
|
7 - L2Trace completed
|
|
8 - Lookup failure for L2Trace"
|
|
|
|
::= { rcCfmL2IpTraceReplyEntry 16}
|
|
|
|
-- wlan scalars and traps and tables
|
|
|
|
rcWlanScalars OBJECT IDENTIFIER ::= { rcWlan 1}
|
|
|
|
rcWlanVlanReserveVlanList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..512))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The object is used as bitfield to indicate all the VLANs that are reserved.
|
|
Each VLAN is stored as a bit. The most-significant (left-most) bit
|
|
represents Vlan Id 1."
|
|
::= { rcWlanScalars 1 }
|
|
|
|
rcWlanVlanReserveNumberVlans OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The object contains the number of reserved VLANs."
|
|
DEFVAL { 0 }
|
|
::= { rcWlanScalars 2 }
|
|
|
|
rcWlanVlanReserveVlanInUse OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The object indicates if a Vlan Id from the reserved pool is in use."
|
|
::= { rcWlanScalars 3 }
|
|
|
|
rcWlanVlanReserveVlanInUseBySmlt OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The object indicates if a Vlan Id from the reserved pool is in use by
|
|
SMLT."
|
|
::= { rcWlanScalars 4 }
|
|
|
|
rcWlanVlanReserveSmltConfigMatch OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The object indicates if a Vlan Id from the reserved pool is the same for
|
|
SMLT peers."
|
|
::= { rcWlanScalars 5 }
|
|
|
|
rcWlanConfigSystemSmltDataIPAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the type of internet address in the
|
|
corresponding instance of rcWlanConfigSystemSmltDataIPAddress.
|
|
Currently,only the values ipv4(1) and ipv6(2) are allowed."
|
|
::= { rcWlanScalars 6 }
|
|
|
|
rcWlanConfigSystemSmltDataIPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4|16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object contains the IP address that will be used for
|
|
Wireless LAN switch SMLT data tunnel."
|
|
::= { rcWlanScalars 7}
|
|
|
|
rcWlanConfigSmltHoldDownTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Timer value, the range of value is from 0 to 3600. Do not start
|
|
forwarding data until local syncronization is done."
|
|
DEFVAL { 0 }
|
|
::= { rcWlanScalars 8 }
|
|
|
|
rcWlanConfigSmltEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is used to enable SMLT wireless feature.
|
|
A value of true(1) means enabled."
|
|
DEFVAL { false }
|
|
::= { rcWlanScalars 9 }
|
|
|
|
rcWlanConfigSmltTcpUdpBasePort OBJECT-TYPE
|
|
SYNTAX InetPortNumber (49152..64983)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "TCP/UDP port to be used in SMLT."
|
|
DEFVAL { 61000 }
|
|
::= { rcWlanScalars 10 }
|
|
|
|
rcWlanConfigRemoteVlanStg OBJECT-TYPE
|
|
SYNTAX Integer32 (0..64|255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The stg id for the remote vlan in the STP/MSTP mode.
|
|
In STP mode, the stg range is 1 to 64.
|
|
IN MSTP mode, the msti range is 0 to 63.
|
|
Setting to 255 is used to remove the valid stg/mstp from wlan."
|
|
::= { rcWlanScalars 11 }
|
|
|
|
rcWlanConfigManagementAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of address contained in the object
|
|
rcWlanConfigManagementAddress."
|
|
::= { rcWlanScalars 12 }
|
|
|
|
rcWlanConfigManagementAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This address is used as the management interface of the wireless switch."
|
|
::= { rcWlanScalars 13 }
|
|
|
|
rcWlanMobSwTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcWlanMobSwTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "this table contains entries of the Access and Mobility tunnels
|
|
that are established at the local switch."
|
|
::= { rcWlan 2}
|
|
|
|
rcWlanMobSwTunnelEntry OBJECT-TYPE
|
|
SYNTAX RcWlanMobSwTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A peer mobility switch or an access point.With one rcWlanMobSwTunnelIntfId
|
|
there ccould be two endpoints with different rcWlanMobSwTunnelPeerDeviceId
|
|
in the case of mobility tunnel established with SMLT pair"
|
|
INDEX { rcWlanMobSwTunnelIntfId,
|
|
rcWlanMobSwTunnelPeerDeviceId }
|
|
::= { rcWlanMobSwTunnelTable 1 }
|
|
|
|
RcWlanMobSwTunnelEntry ::=
|
|
SEQUENCE {
|
|
rcWlanMobSwTunnelIntfId Integer32,
|
|
rcWlanMobSwTunnelPeerDeviceId MacAddress,
|
|
rcWlanMobSwTunnelPeerAddrType InetAddressType,
|
|
rcWlanMobSwTunnelPeerAddr InetAddress,
|
|
rcWlanMobSwTunnelPeerUdpPort InetPortNumber,
|
|
rcWlanMobSwTunnelStatus INTEGER,
|
|
rcWlanMobSwTunnelType INTEGER
|
|
}
|
|
|
|
rcWlanMobSwTunnelIntfId OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to display Logical Port (for example, WLAN tunnel)
|
|
for the tunnel."
|
|
::={rcWlanMobSwTunnelEntry 1}
|
|
|
|
rcWlanMobSwTunnelPeerDeviceId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address that uniquely identifies the peer mobility switch
|
|
or access point on the other side of the tunnel."
|
|
::= { rcWlanMobSwTunnelEntry 2 }
|
|
|
|
rcWlanMobSwTunnelPeerAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of internet address in the
|
|
corresponding instance of rcWlanMobSwTunnelPeerAddr.
|
|
Currently, only the values ipv4(1) and ipv6(2) are allowed."
|
|
::= { rcWlanMobSwTunnelEntry 3 }
|
|
|
|
rcWlanMobSwTunnelPeerAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4|16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the peer mobility switch or access point.
|
|
The type of address is indicated by the corresponding
|
|
instance of rcWlanMobSwTunnelPeerAddrType."
|
|
::= { rcWlanMobSwTunnelEntry 4 }
|
|
|
|
rcWlanMobSwTunnelPeerUdpPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the UDP port which the peer mobility switch or access
|
|
point will use for control protocol communication with the local
|
|
switch."
|
|
::= { rcWlanMobSwTunnelEntry 5 }
|
|
|
|
rcWlanMobSwTunnelStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of the mobility tunnel connection to this
|
|
peer mobility switch, or the access tunnel to this access point."
|
|
::= { rcWlanMobSwTunnelEntry 6 }
|
|
|
|
rcWlanMobSwTunnelType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mobTunnel(1),
|
|
accessTunnel(2),
|
|
resPeerAccessTunnel(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel type."
|
|
::= { rcWlanMobSwTunnelEntry 7 }
|
|
|
|
|
|
|
|
rcWlanNotifications OBJECT IDENTIFIER ::= { rcWlan 3 }
|
|
|
|
rcWlanNotificationErrorType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
none(1),
|
|
holdDownTimerConfigMismatch(2),
|
|
smltDataIpConfigMismatch(3),
|
|
smltDatUdpPortConfigMismatch(4),
|
|
lvlanCollision(5),
|
|
rvlanCollision(6),
|
|
mvlanMappingMismatch(7)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Indicates the type of the error occurred."
|
|
::= { rcWlanNotifications 1}
|
|
|
|
rcWlanNotificationTrapInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "String that contains error details."
|
|
::= { rcWlanNotifications 2 }
|
|
|
|
rcWlanNotificationMobilityTunnelPeerId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This object contains the MAC address that uniquely identifies the
|
|
Tunnel peer id. This value is what is used to identify
|
|
this switch in peer switches, and is used as an in traps."
|
|
::= { rcWlanNotifications 3 }
|
|
|
|
rcWlanNotificationMobTunnelAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the type of internet address in the
|
|
corresponding instance of rcWlanAuxMobTunnelAddress. Currently,
|
|
only the values ipv4(1) and ipv6(2) are allowed."
|
|
::= { rcWlanNotifications 4 }
|
|
|
|
rcWlanNotificationMobTunnelAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4|16))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This object contains the tunnel IP address that will be used in
|
|
errors notification traps."
|
|
::= { rcWlanNotifications 5}
|
|
|
|
rcWlanNotificationMobTunnelMVlanName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..32))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "This object contains mobility VLAN name to be used in errors notification traps."
|
|
::= { rcWlanNotifications 6 }
|
|
|
|
rcnWlanTrap NOTIFICATION-TYPE
|
|
OBJECTS {rcWlanNotificationErrorType,
|
|
rcWlanNotificationTrapInfo,
|
|
rcWlanNotificationMobilityTunnelPeerId,
|
|
rcWlanNotificationMobTunnelAddressType,
|
|
rcWlanNotificationMobTunnelAddress,
|
|
rcWlanNotificationMobTunnelMVlanName }
|
|
STATUS current
|
|
DESCRIPTION "A trap for WLAN to report errors"
|
|
::= { rcTrapsMib 290}
|
|
|
|
rcWlanTunnelStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcWlanTunnelStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table used to store wireless LAN tunnel statistics."
|
|
::= { rcWlan 4 }
|
|
|
|
rcWlanTunnelStatEntry OBJECT-TYPE
|
|
SYNTAX RcWlanTunnelStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "interface counters"
|
|
INDEX { rcWlanTunnelStatInterfaceId,
|
|
rcWlanTunnelStatPeerDeviceId}
|
|
::= { rcWlanTunnelStatTable 1 }
|
|
|
|
RcWlanTunnelStatEntry ::= SEQUENCE {
|
|
rcWlanTunnelStatInterfaceId Integer32,
|
|
rcWlanTunnelStatPeerDeviceId MacAddress,
|
|
rcWlanTunnelStatBridgeInUnicastFrames Counter64,
|
|
rcWlanTunnelStatBridgeInMulticastFrames Counter64,
|
|
rcWlanTunnelStatBridgeInBroadcastFrames Counter64,
|
|
rcWlanTunnelStatBridgeInDiscards Counter64,
|
|
rcWlanTunnelStatBridgeOutFrames Counter64,
|
|
rcWlanTunnelStatRouteInUnicastFrames Counter64,
|
|
rcWlanTunnelStatRouteInMulticastFrames Counter64,
|
|
rcWlanTunnelStatRouteInDiscards Counter64,
|
|
rcWlanTunnelStatRouteOutUnicastFrames Counter64,
|
|
rcWlanTunnelStatRouteOutMulticastFrames Counter64,
|
|
rcWlanTunnelStatKeepaliveInFrames Counter64,
|
|
rcWlanTunnelStatKeepaliveOutFrames Counter64,
|
|
rcWlanTunnelStatAllInFrames Counter64,
|
|
rcWlanTunnelStatAllOutFrames Counter64,
|
|
rcWlanTunnelStatAllInDiscardFrames Counter64,
|
|
rcWlanTunnelStatAllOutDiscardFrames Counter64,
|
|
rcWlanTunnelStatReset INTEGER
|
|
}
|
|
|
|
rcWlanTunnelStatInterfaceId OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Used to display Logical Port (for example, WLAN tunnel)
|
|
for the tunnel."
|
|
::= { rcWlanTunnelStatEntry 1 }
|
|
|
|
rcWlanTunnelStatPeerDeviceId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The MAC address that uniquely identifies the
|
|
peer mobility switch or access point on the
|
|
other side of the tunnel."
|
|
::= { rcWlanTunnelStatEntry 2 }
|
|
|
|
rcWlanTunnelStatBridgeInUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming unicast frames that
|
|
were bridged."
|
|
::= { rcWlanTunnelStatEntry 3 }
|
|
|
|
rcWlanTunnelStatBridgeInMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming multicast frames that
|
|
were bridged."
|
|
::= { rcWlanTunnelStatEntry 4 }
|
|
|
|
rcWlanTunnelStatBridgeInBroadcastFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming broadcast frames that
|
|
were bridged."
|
|
::= { rcWlanTunnelStatEntry 5 }
|
|
|
|
rcWlanTunnelStatBridgeInDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of frames that were discarded by
|
|
the bridging entity."
|
|
::= { rcWlanTunnelStatEntry 6 }
|
|
|
|
rcWlanTunnelStatBridgeOutFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing frames that
|
|
were bridged."
|
|
::= { rcWlanTunnelStatEntry 7 }
|
|
|
|
rcWlanTunnelStatRouteInUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming unicast frames that
|
|
were routed."
|
|
::= { rcWlanTunnelStatEntry 8 }
|
|
|
|
rcWlanTunnelStatRouteInMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming multicast frames that
|
|
were routed."
|
|
::= { rcWlanTunnelStatEntry 9 }
|
|
|
|
rcWlanTunnelStatRouteInDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming frames that were discarded by
|
|
the routing entity."
|
|
::= { rcWlanTunnelStatEntry 10 }
|
|
|
|
rcWlanTunnelStatRouteOutUnicastFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing unicast frames that
|
|
were routed."
|
|
::= { rcWlanTunnelStatEntry 11 }
|
|
|
|
rcWlanTunnelStatRouteOutMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing multicast frames that
|
|
were routed."
|
|
::= { rcWlanTunnelStatEntry 12 }
|
|
|
|
rcWlanTunnelStatKeepaliveInFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming keepalive frames."
|
|
::= { rcWlanTunnelStatEntry 13 }
|
|
|
|
rcWlanTunnelStatKeepaliveOutFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing keepalive frames."
|
|
::= { rcWlanTunnelStatEntry 14 }
|
|
|
|
rcWlanTunnelStatAllInFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming frames that
|
|
were bridged, routed and incoming keepalive frames."
|
|
::= { rcWlanTunnelStatEntry 15 }
|
|
|
|
rcWlanTunnelStatAllOutFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing frames that
|
|
were bridged, routed and outgoing keepalive frames."
|
|
::= { rcWlanTunnelStatEntry 16 }
|
|
|
|
rcWlanTunnelStatAllInDiscardFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of incoming frames that were discarded."
|
|
::= { rcWlanTunnelStatEntry 17 }
|
|
|
|
rcWlanTunnelStatAllOutDiscardFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The total number of outgoing frames that were discarded."
|
|
::= { rcWlanTunnelStatEntry 18 }
|
|
|
|
rcWlanTunnelStatReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
reset(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This is an action object. When this object is set to reset(2),
|
|
statistics for the tunnel will be cleared.
|
|
Read on this object always returns none(1)."
|
|
::= { rcWlanTunnelStatEntry 19 }
|
|
|
|
|
|
-- The Transmit L2 Multicast Trace Table
|
|
|
|
rcCfmTransmitL2McastTraceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmTransmitL2McastTraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of l2 multicast route trace
|
|
requests."
|
|
::= { rcCfm 41}
|
|
|
|
rcCfmTransmitL2McastTraceEntry OBJECT-TYPE
|
|
SYNTAX RcCfmTransmitL2McastTraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "CFM Transmit L2 Multicast Trace Entry."
|
|
INDEX { rcCfmTransmitL2McastTraceSrcIpAddrType,
|
|
rcCfmTransmitL2McastTraceSrcIpAddr,
|
|
rcCfmTransmitL2McastTraceGroupIpAddrType,
|
|
rcCfmTransmitL2McastTraceGroupIpAddr,
|
|
rcCfmTransmitL2McastTraceServiceType,
|
|
rcCfmTransmitL2McastTraceServiceId
|
|
}
|
|
::= { rcCfmTransmitL2McastTraceTable 1 }
|
|
|
|
|
|
RcCfmTransmitL2McastTraceEntry ::= SEQUENCE {
|
|
|
|
rcCfmTransmitL2McastTraceSrcIpAddrType InetAddressType,
|
|
rcCfmTransmitL2McastTraceSrcIpAddr InetAddress,
|
|
rcCfmTransmitL2McastTraceGroupIpAddrType InetAddressType,
|
|
rcCfmTransmitL2McastTraceGroupIpAddr InetAddress,
|
|
rcCfmTransmitL2McastTraceServiceType INTEGER,
|
|
rcCfmTransmitL2McastTraceServiceId Integer32,
|
|
rcCfmTransmitL2McastTraceVrfName DisplayString,
|
|
rcCfmTransmitL2McastTraceRowStatus RowStatus,
|
|
rcCfmTransmitL2McastTracePriority Integer32,
|
|
rcCfmTransmitL2McastTraceTtl Integer32,
|
|
rcCfmTransmitL2McastTraceSeqNumber Integer32,
|
|
rcCfmTransmitL2McastTraceStatus INTEGER,
|
|
rcCfmTransmitL2McastTraceResultOk TruthValue,
|
|
rcCfmTransmitL2McastTraceFlag INTEGER
|
|
}
|
|
|
|
rcCfmTransmitL2McastTraceSrcIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of Source IP Address"
|
|
::= { rcCfmTransmitL2McastTraceEntry 1 }
|
|
|
|
rcCfmTransmitL2McastTraceSrcIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source IP Address. Support ipv4 at this time"
|
|
::= { rcCfmTransmitL2McastTraceEntry 2 }
|
|
|
|
rcCfmTransmitL2McastTraceGroupIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of Multicast Group IP Address"
|
|
::= { rcCfmTransmitL2McastTraceEntry 3 }
|
|
|
|
rcCfmTransmitL2McastTraceGroupIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Group IP Address. Support ipv4 at this time"
|
|
::= { rcCfmTransmitL2McastTraceEntry 4 }
|
|
|
|
rcCfmTransmitL2McastTraceServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vlan(1),
|
|
vrfid(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service type indicates what value of service id means.
|
|
vlan - indicates value maps to VLAN
|
|
vrfid - indicates value maps to a VRF Id"
|
|
::= { rcCfmTransmitL2McastTraceEntry 5 }
|
|
|
|
rcCfmTransmitL2McastTraceServiceId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of VLAN or VRF-Id. Meaning controlled by
|
|
rcCfmTransmitL2McastTraceServiceType. Value must be
|
|
valid for type (e.g. VLAN range 1..4094)"
|
|
::= { rcCfmTransmitL2McastTraceEntry 6 }
|
|
|
|
rcCfmTransmitL2McastTraceVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The name of the Virtual Router of the originator"
|
|
::= { rcCfmTransmitL2McastTraceEntry 7 }
|
|
|
|
rcCfmTransmitL2McastTraceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the
|
|
rcCfmTransmitL2McastTraceTable. Deletion
|
|
of an entry in this table results in a corresponding
|
|
rcCfmL2McastTraceReplyTable entries being deleted"
|
|
::= { rcCfmTransmitL2McastTraceEntry 8 }
|
|
|
|
rcCfmTransmitL2McastTracePriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Priority. 3 bit value to be used in the VLAN hdr,
|
|
if present in the transmitted frame."
|
|
DEFVAL {7}
|
|
::= { rcCfmTransmitL2McastTraceEntry 9 }
|
|
|
|
rcCfmTransmitL2McastTraceTtl OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The number of hops remaining to this trace.
|
|
Decremented by 1 by each Bridge that handles trace.
|
|
If 0 on output, the trace is not transmitted to
|
|
the next hop. The value of the TTL Field in the
|
|
trace trasnmitted by originating MEP is controlled
|
|
by a Managed Object; the default value if none is
|
|
specified is 64."
|
|
DEFVAL {64}
|
|
::= { rcCfmTransmitL2McastTraceEntry 10 }
|
|
|
|
rcCfmTransmitL2McastTraceSeqNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The transaction identifier/sequence number of the
|
|
first message (to be) sent."
|
|
::= { rcCfmTransmitL2McastTraceEntry 11}
|
|
|
|
rcCfmTransmitL2McastTraceStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
transmit(2),
|
|
abort(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Status of the transmit loopback service:
|
|
-ready. The service is available.
|
|
-transmit. The service is transmitting, or about to
|
|
transmit the trace messages.
|
|
-abort The service is aborted or about to abort
|
|
the trace messages.
|
|
|
|
This column will also be used to avoid concurrency or
|
|
race condition problems that could occur if two or
|
|
more management entities try to
|
|
use the service at the same time. "
|
|
DEFVAL {ready}
|
|
::= { rcCfmTransmitL2McastTraceEntry 12}
|
|
|
|
rcCfmTransmitL2McastTraceResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the result of the operation:
|
|
-true. The Trace Message(s) will/have been sent.
|
|
-false. The Trace Message(s) will not be sent."
|
|
DEFVAL {true}
|
|
::= { rcCfmTransmitL2McastTraceEntry 13 }
|
|
|
|
rcCfmTransmitL2McastTraceFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
internalError(2),
|
|
mepDisabled(3),
|
|
noResponse(4),
|
|
traceComplete(5),
|
|
leafNode(6),
|
|
noDataIsidFound(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Result flag indicating L2Trace status or error code.
|
|
Each enum value represents a status or error case.
|
|
1 - No error
|
|
2 - Internal Error
|
|
3 - Mep must be enabled in order to perform trace
|
|
4 - No response received
|
|
5 - Trace completed
|
|
6 - On a leaf node in the i-sid tree
|
|
7 - No Data Isid was found for S,G"
|
|
::= { rcCfmTransmitL2McastTraceEntry 14}
|
|
|
|
|
|
-- The L2 Multicast Trace Reply Table
|
|
|
|
rcCfmL2McastTraceReplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcCfmL2McastTraceReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of multicast route trace
|
|
replies received by a specific MEP in response to a
|
|
trace message."
|
|
::= { rcCfm 42}
|
|
|
|
rcCfmL2McastTraceReplyEntry OBJECT-TYPE
|
|
SYNTAX RcCfmL2McastTraceReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The L2 Multicast Trace Reply Table Entry"
|
|
INDEX { rcCfmL2McastTraceReplySrcIpAddrType,
|
|
rcCfmL2McastTraceReplySrcIpAddr,
|
|
rcCfmL2McastTraceReplyGroupIpAddrType,
|
|
rcCfmL2McastTraceReplyGroupIpAddr,
|
|
rcCfmL2McastTraceReplyServiceType,
|
|
rcCfmL2McastTraceReplyServiceId,
|
|
rcCfmL2McastTraceReplyHop,
|
|
rcCfmL2McastTraceReplyReceiveOrder
|
|
}
|
|
::= { rcCfmL2McastTraceReplyTable 1 }
|
|
|
|
|
|
RcCfmL2McastTraceReplyEntry ::= SEQUENCE {
|
|
|
|
rcCfmL2McastTraceReplySrcIpAddrType InetAddressType,
|
|
rcCfmL2McastTraceReplySrcIpAddr InetAddress,
|
|
rcCfmL2McastTraceReplyGroupIpAddrType InetAddressType,
|
|
rcCfmL2McastTraceReplyGroupIpAddr InetAddress,
|
|
rcCfmL2McastTraceReplyServiceType INTEGER,
|
|
rcCfmL2McastTraceReplyServiceId Integer32,
|
|
rcCfmL2McastTraceReplyHop Integer32,
|
|
rcCfmL2McastTraceReplyReceiveOrder Integer32,
|
|
rcCfmL2McastTraceReplyTtl Integer32,
|
|
rcCfmL2McastTraceReplyVrfName DisplayString,
|
|
rcCfmL2McastTraceReplySrcMac MacAddress,
|
|
rcCfmL2McastTraceReplyHostName OCTET STRING,
|
|
rcCfmL2McastTraceReplyLastSrcMac MacAddress,
|
|
rcCfmL2McastTraceReplyLastHostName OCTET STRING,
|
|
rcCfmL2McastTraceReplySpbmVlanId Integer32,
|
|
rcCfmL2McastTraceReplyBMac MacAddress,
|
|
rcCfmL2McastTraceReplyIsid Integer32
|
|
}
|
|
|
|
rcCfmL2McastTraceReplySrcIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of Source IP Address"
|
|
::= { rcCfmL2McastTraceReplyEntry 1 }
|
|
|
|
rcCfmL2McastTraceReplySrcIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source IP Address. Support ipv4 at this time"
|
|
::= { rcCfmL2McastTraceReplyEntry 2 }
|
|
|
|
rcCfmL2McastTraceReplyGroupIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of Multicast Group IP Address"
|
|
::= { rcCfmL2McastTraceReplyEntry 3 }
|
|
|
|
rcCfmL2McastTraceReplyGroupIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Group IP Address. Support ipv4 at this time"
|
|
::= { rcCfmL2McastTraceReplyEntry 4 }
|
|
|
|
rcCfmL2McastTraceReplyServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vlan(1),
|
|
vrfid(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service type indicates what value of service id means.
|
|
vlan - indicates value maps to VLAN
|
|
vrfid - indicates value maps to a VRF Id"
|
|
::= { rcCfmL2McastTraceReplyEntry 5 }
|
|
|
|
rcCfmL2McastTraceReplyServiceId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of VLAN or VRF-Id. Meaning controlled by
|
|
rcCfmL2McastTraceReplyServiceType. Value must be
|
|
valid for type (e.g. VLAN range 1..4094)"
|
|
::= { rcCfmL2McastTraceReplyEntry 6 }
|
|
|
|
rcCfmL2McastTraceReplyHop OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The number of hops away from trace initiator"
|
|
::= { rcCfmL2McastTraceReplyEntry 7 }
|
|
|
|
rcCfmL2McastTraceReplyReceiveOrder OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple responses
|
|
with the same Transaction Identifier field value. This value
|
|
is assigned sequentially from 1, in the order that the
|
|
Linktrace Initiator received the responses."
|
|
::= { rcCfmL2McastTraceReplyEntry 8 }
|
|
|
|
rcCfmL2McastTraceReplyTtl OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ttl field value for a returned trace response."
|
|
::= { rcCfmL2McastTraceReplyEntry 9 }
|
|
|
|
rcCfmL2McastTraceReplyVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The name of the Virtual Router of the originator"
|
|
::= { rcCfmL2McastTraceReplyEntry 10}
|
|
|
|
rcCfmL2McastTraceReplySrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac address of the MP that respond to the trace
|
|
request"
|
|
::= { rcCfmL2McastTraceReplyEntry 11 }
|
|
|
|
rcCfmL2McastTraceReplyHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The host name of the replying node"
|
|
::= { rcCfmL2McastTraceReplyEntry 12 }
|
|
|
|
rcCfmL2McastTraceReplyLastSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The MAC address of the node that forwarded the trace
|
|
to the responding node"
|
|
::= { rcCfmL2McastTraceReplyEntry 13 }
|
|
|
|
rcCfmL2McastTraceReplyLastHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The host name of the node that forwarded the trace
|
|
to the responding node"
|
|
::= { rcCfmL2McastTraceReplyEntry 14 }
|
|
|
|
rcCfmL2McastTraceReplySpbmVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The SPBM VLAN id used for the trace"
|
|
::= { rcCfmL2McastTraceReplyEntry 15 }
|
|
|
|
rcCfmL2McastTraceReplyBMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The multicast MAC address for the group"
|
|
::= { rcCfmL2McastTraceReplyEntry 16 }
|
|
|
|
rcCfmL2McastTraceReplyIsid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Isid id for the group"
|
|
::= { rcCfmL2McastTraceReplyEntry 17 }
|
|
|
|
-- ISID Table
|
|
|
|
rcIsidNumIsids OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of i-sids currently defined in the switch."
|
|
::= { rcIsid 1 }
|
|
|
|
rcIsidServiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsidServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of service instance entries. The number of
|
|
entries is given by rcIsidNumIsids."
|
|
::= { rcIsid 2 }
|
|
|
|
rcIsidServiceEntry OBJECT-TYPE
|
|
SYNTAX RcIsidServiceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular Service entry."
|
|
INDEX { rcIsidServiceId }
|
|
::= { rcIsidServiceTable 1 }
|
|
|
|
RcIsidServiceEntry ::= SEQUENCE {
|
|
rcIsidServiceId Integer32,
|
|
rcIsidServiceType INTEGER,
|
|
rcIsidServiceRowStatus RowStatus,
|
|
rcIsidServiceMacLimitEnable TruthValue,
|
|
rcIsidServiceMaxMacLimit Integer32,
|
|
rcIsidServiceAction INTEGER,
|
|
rcIsidServiceOrigin INTEGER,
|
|
rcIsidServiceVnid Integer32
|
|
}
|
|
|
|
rcIsidServiceId OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely indentifies the service
|
|
associated with this entry. "
|
|
::= { rcIsidServiceEntry 1 }
|
|
|
|
rcIsidServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
elanTransparent(1), --Port based service
|
|
elan(2), --switched uni based service
|
|
etree(3), --Private Vlan based service
|
|
l2vsn(4) --Vlan based service
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "It represents the type of service associated
|
|
with this entry."
|
|
::= { rcIsidServiceEntry 2 }
|
|
|
|
rcIsidServiceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create/delete entries in the Table."
|
|
::= { rcIsidServiceEntry 3 }
|
|
|
|
rcIsidServiceMacLimitEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Controls whether the mac-limit should be enabled.
|
|
To enable, set this value to true. To disable,
|
|
set this value to false."
|
|
::= { rcIsidServiceEntry 4 }
|
|
|
|
rcIsidServiceMaxMacLimit OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "A value used to indicate the maximum value of mac-
|
|
address that can be learnt on a per service(i-sid) basis."
|
|
DEFVAL { 1024 }
|
|
::= { rcIsidServiceEntry 5 }
|
|
|
|
rcIsidServiceAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
flushMacFdb(2), -- flush MAC forwarding table
|
|
syncMacFdb(3) -- sync MAC forwarding table
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "I-sid related actions."
|
|
DEFVAL { none }
|
|
::= { rcIsidServiceEntry 6 }
|
|
|
|
rcIsidServiceOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(1), -- manually configured
|
|
discoverLocal(2), -- discovered by fabric attach
|
|
discoverRemote(3), -- discovered by fabric attach ist peer
|
|
management(4), -- configured through fa management isid
|
|
discoverBoth(5), -- discovered by fabric attach and ist peer
|
|
spbm(6), -- cvlan
|
|
mgmtDiscoverLocal(7), -- fa management isid and discovered by fabric attach
|
|
mgmtDiscoverRemote(8), -- fa management isid and by fabric attach ist peer
|
|
mgmtDiscoverBoth(9) -- fa management isid, discovered by fabric attach and peer
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "It represents the origin of this isid."
|
|
::= { rcIsidServiceEntry 7 }
|
|
|
|
rcIsidServiceVnid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the vxlan service
|
|
associated with this entry. "
|
|
::= { rcIsidServiceEntry 8 }
|
|
|
|
-- ISID Elan Transparent Table
|
|
|
|
rcIsidElanTransparentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsidElanTransparentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of service instance entries of type elan-
|
|
transparent. This is created by rcIsidServiceEntry."
|
|
::= { rcIsid 3 }
|
|
|
|
rcIsidElanTransparentEntry OBJECT-TYPE
|
|
SYNTAX RcIsidElanTransparentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular Service entry of type elan-transparent."
|
|
INDEX { rcIsidElanTransparentId }
|
|
::= { rcIsidElanTransparentTable 1 }
|
|
|
|
RcIsidElanTransparentEntry ::= SEQUENCE {
|
|
rcIsidElanTransparentId Integer32,
|
|
rcIsidElanTransparentPortMembers PortSet,
|
|
rcIsidElanTransparentMltIds OCTET STRING
|
|
}
|
|
|
|
rcIsidElanTransparentId OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the service
|
|
already created by rcIsidServiceTable."
|
|
::= { rcIsidElanTransparentEntry 1 }
|
|
|
|
rcIsidElanTransparentPortMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The set of ports that are members of this service type."
|
|
::= { rcIsidElanTransparentEntry 2 }
|
|
|
|
rcIsidElanTransparentMltIds OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..65))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A set of bits represents the MLT IDs.From left to
|
|
right, the first bit set represent MltId 1. The
|
|
second bit set represent MltId 2, and so on so forth,
|
|
Up to bit 511 which represents Mlt Id 512."
|
|
::= { rcIsidElanTransparentEntry 3}
|
|
|
|
-- ISID Elan End Point Table
|
|
|
|
rcIsidElanEndPointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsidElanEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of elan end point entries."
|
|
::= { rcIsid 4 }
|
|
|
|
rcIsidElanEndPointEntry OBJECT-TYPE
|
|
SYNTAX RcIsidElanEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing configuration information for a
|
|
particular elan end point."
|
|
INDEX { rcIsidElanEndPointIsid,
|
|
rcIsidElanEndPointCvid,
|
|
rcIsidElanEndPointIfIndex}
|
|
::= { rcIsidElanEndPointTable 1 }
|
|
|
|
RcIsidElanEndPointEntry ::= SEQUENCE {
|
|
rcIsidElanEndPointIsid Integer32,
|
|
rcIsidElanEndPointCvid Integer32,
|
|
rcIsidElanEndPointIfIndex InterfaceIndex,
|
|
rcIsidElanEndPointRowStatus RowStatus,
|
|
rcIsidElanEndPointBpdu TruthValue,
|
|
rcIsidElanEndPointOrigin INTEGER
|
|
}
|
|
|
|
rcIsidElanEndPointIsid OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the i-sid
|
|
of this elan end point."
|
|
::= { rcIsidElanEndPointEntry 1 }
|
|
|
|
rcIsidElanEndPointCvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the customer vid
|
|
of this elan end point. 4095 is not used. 4096 is reserved for
|
|
untagged case"
|
|
::= { rcIsidElanEndPointEntry 2 }
|
|
|
|
rcIsidElanEndPointIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface index for mlt or port of this elan end point."
|
|
::= { rcIsidElanEndPointEntry 3 }
|
|
|
|
rcIsidElanEndPointRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Row status for create/delete. "
|
|
::= { rcIsidElanEndPointEntry 4}
|
|
|
|
rcIsidElanEndPointBpdu OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "set bpdu enable/disable for untagged end point.
|
|
Disable to drop the bpdu, enable to forward the bpdu. Default
|
|
is disable."
|
|
DEFVAL { false }
|
|
::= { rcIsidElanEndPointEntry 5}
|
|
|
|
rcIsidElanEndPointOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(1), -- manually configured
|
|
discoverLocal(2), -- discovered by fabric attach
|
|
discoverRemote(3), -- discovered by fabric attach ist peer
|
|
management(4), -- configured through fa management isid
|
|
discoverBoth(5), -- discovered by fabric attach and ist peer
|
|
spbm(6), -- cvlan
|
|
mgmtDiscoverLocal(7), -- fa management isid and discovered by fabric attach
|
|
mgmtDiscoverRemote(8), -- fa management isid and by fabric attach ist peer
|
|
mgmtDiscoverBoth(9) -- fa management isid, discovered by fabric attach and peer
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "It represents the origin of service associated
|
|
with this isid elan end point."
|
|
::= { rcIsidElanEndPointEntry 6 }
|
|
|
|
rcIsidInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIsidInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of isid interface entries."
|
|
::= { rcIsid 5 }
|
|
|
|
rcIsidInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIsidInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry containing information for a
|
|
particular isid interface (port/mlt)."
|
|
INDEX { rcIsidInterfaceIfIndex,
|
|
rcIsidInterfaceIsid }
|
|
::= { rcIsidInterfaceTable 1 }
|
|
|
|
RcIsidInterfaceEntry ::= SEQUENCE {
|
|
rcIsidInterfaceIfIndex InterfaceIndex,
|
|
rcIsidInterfaceIsid Integer32,
|
|
rcIsidInterfaceVlan Integer32,
|
|
rcIsidInterfaceCvid Integer32,
|
|
rcIsidInterfaceType INTEGER,
|
|
rcIsidInterfaceOrigin INTEGER,
|
|
rcIsidInterfaceBpdu TruthValue
|
|
}
|
|
|
|
rcIsidInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface index for this isid interface."
|
|
::= { rcIsidInterfaceEntry 1 }
|
|
|
|
rcIsidInterfaceIsid OBJECT-TYPE
|
|
SYNTAX Integer32(1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the i-sid
|
|
of this isid interface."
|
|
::= { rcIsidInterfaceEntry 2 }
|
|
|
|
rcIsidInterfaceVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4084)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the platform vlan of
|
|
this isid interface."
|
|
::= { rcIsidInterfaceEntry 3 }
|
|
|
|
rcIsidInterfaceCvid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the customer vid
|
|
of this isid interface. 4095 is not used. 4096 is reserved for
|
|
untagged case"
|
|
::= { rcIsidInterfaceEntry 4 }
|
|
|
|
rcIsidInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
elanTransparent(1), --Port based service
|
|
elan(2), --switched uni based service
|
|
etree(3), --Private Vlan based service
|
|
l2vsn(4) --Vlan based service
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "It represents the type of service associated
|
|
with this isid interface."
|
|
::= { rcIsidInterfaceEntry 5 }
|
|
|
|
rcIsidInterfaceOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
config(1), -- manually configured
|
|
discoverLocal(2), -- discovered by fabric attach
|
|
discoverRemote(3), -- discovered by fabric attach ist peer
|
|
management(4), -- configured through fa management isid
|
|
discoverBoth(5), -- discovered by fabric attach and ist peer
|
|
spbm(6), -- cvlan
|
|
mgmtDiscoverLocal(7), -- fa management isid and discovered by fabric attach
|
|
mgmtDiscoverRemote(8), -- fa management isid and by fabric attach ist peer
|
|
mgmtDiscoverBoth(9) -- fa management isid, discovered by fabric attach and peer
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "It represents the origin of service associated
|
|
with this isid interface."
|
|
::= { rcIsidInterfaceEntry 6 }
|
|
|
|
rcIsidInterfaceBpdu OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "It represents bpdu for untagged isid interface.
|
|
Disable is to drop the bpdu, enable is to forward the bpdu."
|
|
::= { rcIsidInterfaceEntry 7}
|
|
|
|
--MACSec Proprietary Tables
|
|
|
|
rcMACSecCATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMACSecCAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A Table which describes the Connectivity Associations
|
|
in a System (VSP 4000/9000)"
|
|
::= { rcMACSec 1 }
|
|
|
|
rcMACSecCAEntry OBJECT-TYPE
|
|
SYNTAX RcMACSecCAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A conceptual row of rcMACSec Table"
|
|
INDEX { rcMACSecConnectivityAssociationId }
|
|
::= { rcMACSecCATable 1 }
|
|
RcMACSecCAEntry ::= SEQUENCE
|
|
{
|
|
rcMACSecConnectivityAssociationId Integer32,
|
|
rcMACSecConnectivityAssociationName DisplayString,
|
|
rcMACSecConnectivityAssociationKey OCTET STRING,
|
|
rcMACSecConnectivityAssociationPortMembers PortSet,
|
|
rcMACSecConnectivityAssociationRowStatus RowStatus,
|
|
rcMACSecConnectivityAssociationTxKeyParity INTEGER
|
|
}
|
|
|
|
rcMACSecConnectivityAssociationId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..512)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique Id assigned to each connectivity association
|
|
configured on the switch(VSP 4000/9000). This MIB element
|
|
is used for internal logic only."
|
|
::= { rcMACSecCAEntry 1 }
|
|
|
|
rcMACSecConnectivityAssociationName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (5..15))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "A user configured name given to each Connectivity
|
|
Association configured on the switch"
|
|
::= { rcMACSecCAEntry 2 }
|
|
|
|
rcMACSecConnectivityAssociationKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (10..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "A pre shared, Connectivity Association Key associated
|
|
with each connectivity association configured on the switch"
|
|
::= { rcMACSecCAEntry 3 }
|
|
|
|
rcMACSecConnectivityAssociationPortMembers OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The set of ports to which this connectivity
|
|
association is associated with"
|
|
::= { rcMACSecCAEntry 4 }
|
|
|
|
rcMACSecConnectivityAssociationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Used to create and delete conceptual Rows of
|
|
connectivity associations"
|
|
::= { rcMACSecCAEntry 5 }
|
|
|
|
rcMACSecConnectivityAssociationTxKeyParity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
even(2),
|
|
odd(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Use Odd or Even Keys generated while programming
|
|
in Switch Hardware"
|
|
::= { rcMACSecCAEntry 6 }
|
|
|
|
rcMACSecIfConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMACSecIfConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table which provides MACSec Configurations on a per port basis"
|
|
::= { rcMACSec 2 }
|
|
|
|
rcMACSecIfConfigEntry OBJECT-TYPE
|
|
SYNTAX RcMACSecIfConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Conceptual Row of rcMACSecIfConfigTable"
|
|
AUGMENTS { secyIfEntry }
|
|
::= { rcMACSecIfConfigTable 1 }
|
|
|
|
RcMACSecIfConfigEntry ::= SEQUENCE
|
|
{
|
|
rcMACSecIfCAName DisplayString,
|
|
rcMACSecIfOffsetValue INTEGER,
|
|
rcMACSecIfEncryptionEnable TruthValue,
|
|
rcMACSecIfClearStats TruthValue
|
|
}
|
|
|
|
|
|
rcMACSecIfCAName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (5..15))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name of Connectivity Association attached to the port/interface"
|
|
::= { rcMACSecIfConfigEntry 1 }
|
|
|
|
rcMACSecIfOffsetValue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
ipv4Offset(2),
|
|
ipv6Offset(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Using this parameter, Ipv4 + TCP/UDP header or Ipv6 +
|
|
TCP/UDP header can be Offset from MACSec Encryption"
|
|
DEFVAL { none }
|
|
::= { rcMACSecIfConfigEntry 2 }
|
|
|
|
rcMACSecIfEncryptionEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Encryption Status per port. Used to Enable/Disable
|
|
Encryption for each macsec capable port"
|
|
::= { rcMACSecIfConfigEntry 3 }
|
|
|
|
rcMACSecIfClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to clear MACSec stats for a port. This will display
|
|
always false when retrieved through SNMP Get."
|
|
DEFVAL { false }
|
|
::= { rcMACSecIfConfigEntry 4 }
|
|
|
|
-- rcVirtualIst MIBS
|
|
|
|
rcVirtualIstSessionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to enable/disable virtual IST functionality."
|
|
::= { rcVirtualIst 1 }
|
|
|
|
rcVirtualIstPeerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Virtual IST Peer Ip address."
|
|
::= { rcVirtualIst 2 }
|
|
|
|
rcVirtualIstVlanId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4084)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Virtual IST Vlan Id. 0 is default when it
|
|
is not set."
|
|
::= { rcVirtualIst 3 }
|
|
|
|
-- rcSingleCpSystem MIBS
|
|
|
|
rcSingleCpSystemCpuTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the temperature in celsius of the
|
|
air near CPU area."
|
|
::= {rcSingleCpSystem 1}
|
|
|
|
rcSingleCpSystemMacTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the temperature in celsius of the
|
|
air near MAC area."
|
|
::= {rcSingleCpSystem 2}
|
|
|
|
rcSingleCpSystemPhy1Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the temperature in celsius of the
|
|
air near PHY1 area."
|
|
::= {rcSingleCpSystem 3}
|
|
|
|
rcSingleCpSystemPhy2Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the temperature in celsius of the
|
|
air near PHY2 area. If its value is zero, then it is not applicable to that platform "
|
|
::= {rcSingleCpSystem 4}
|
|
|
|
rcSingleCpSystemMac2Temperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used to indicate the temperature in celsius of the
|
|
air near MAC2 area. If its value is zero, then it is not applicable to that platform "
|
|
::= {rcSingleCpSystem 5}
|
|
|
|
--
|
|
-- LLDP and CDP definition
|
|
--
|
|
rcLldpMIBObjects OBJECT IDENTIFIER ::= { rcLldpExt 1 }
|
|
rcLldpGlobal OBJECT IDENTIFIER ::= { rcLldpMIBObjects 1 }
|
|
rcLldpPort OBJECT IDENTIFIER ::= { rcLldpMIBObjects 2 }
|
|
|
|
|
|
-- CDP port Table
|
|
|
|
rcLldpPortCdpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcLldpPortCdpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table contains the configuration of CDP
|
|
on the device's interfaces."
|
|
::= { rcLldpPort 1 }
|
|
|
|
rcLldpPortCdpConfigEntry OBJECT-TYPE
|
|
SYNTAX RcLldpPortCdpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the rcLldpPortCdpConfigTable,
|
|
containing the status of CDP on an interface."
|
|
INDEX { rcLldpPortCdpConfigIfIndex }
|
|
::= { rcLldpPortCdpConfigTable 1 }
|
|
|
|
RcLldpPortCdpConfigEntry ::= SEQUENCE {
|
|
rcLldpPortCdpConfigIfIndex InterfaceIndex,
|
|
rcLldpPortCdpConfigAdminState TruthValue
|
|
}
|
|
|
|
rcLldpPortCdpConfigIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the local interface.
|
|
It is local port interface index"
|
|
::= { rcLldpPortCdpConfigEntry 1 }
|
|
|
|
rcLldpPortCdpConfigAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Admininstrattely state of the CDP message on the interface.
|
|
the value of this object has no meaning if CDP compatible mode
|
|
is globally disabled
|
|
(rcLldpGlobalCdpCompatibleModeEnbale is set to false)"
|
|
::= { rcLldpPortCdpConfigEntry 2 }
|
|
|
|
|
|
--
|
|
-- The LLDP CDP REMOTE Info Table
|
|
--
|
|
|
|
rcLldpPortCdpRemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcLldpPortCdpRemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains the Remote device information
|
|
obtained via receiving CDP messages on
|
|
the local interface. Each rows is per physical network
|
|
connection known to this agent "
|
|
::= { rcLldpPort 2 }
|
|
|
|
rcLldpPortCdpRemEntry OBJECT-TYPE
|
|
SYNTAX RcLldpPortCdpRemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"An entry of the rcLldpPortCdpRemTable,
|
|
contains the information received via CDP on one
|
|
interface from one device. Entries is craeted when
|
|
CDP message is received from neighbor and it is
|
|
deleted when CDP is disbaled on interface or globally"
|
|
INDEX { rcLldpPortCdpRemLocalPortNum, rcLldpPortCdpRemIndex }
|
|
::= { rcLldpPortCdpRemTable 1 }
|
|
|
|
RcLldpPortCdpRemEntry ::= SEQUENCE {
|
|
rcLldpPortCdpRemLocalPortNum InterfaceIndex,
|
|
rcLldpPortCdpRemIndex Integer32,
|
|
rcLldpPortCdpRemAddressType AddressFamilyNumbers,
|
|
rcLldpPortCdpRemAddress LldpManAddress,
|
|
rcLldpPortCdpRemVersion DisplayString,
|
|
rcLldpPortCdpRemDeviceIdType INTEGER,
|
|
rcLldpPortCdpRemDeviceId DisplayString,
|
|
rcLldpPortCdpRemPortId DisplayString,
|
|
rcLldpPortCdpRemPlatform DisplayString,
|
|
rcLldpPortCdpRemCapabilities LldpSystemCapabilitiesMap,
|
|
rcLldpPortCdpRemSysName DisplayString,
|
|
rcLldpPortCdpRemLastChange TimeStamp
|
|
}
|
|
|
|
rcLldpPortCdpRemLocalPortNum OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port interface index value used to identify the port component
|
|
(contained in the local chassis with the LLDP/CDP agent)
|
|
associated with this entry. The rcLldpPortCdpRemLocalPortNum
|
|
identifies the port on which the remote system information
|
|
is received."
|
|
::= { rcLldpPortCdpRemEntry 1 }
|
|
|
|
rcLldpPortCdpRemIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents an arbitrary local integer value used
|
|
by this agent to identify a particular connection instance,
|
|
unique only for the indicated remote system.
|
|
|
|
An agent is encouraged to assign monotonically increasing
|
|
index values to new entries, starting with one, after each
|
|
reboot. It is considered unlikely that the
|
|
rcLldpPortCdpRemDeviceIndex will wrap between reboots."
|
|
::= { rcLldpPortCdpRemEntry 2 }
|
|
|
|
rcLldpPortCdpRemAddressType OBJECT-TYPE
|
|
SYNTAX AddressFamilyNumbers
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of address identifier encoding used in
|
|
the associated 'rcLldpPortCdpRemAddress' object."
|
|
::= { rcLldpPortCdpRemEntry 3 }
|
|
|
|
rcLldpPortCdpRemAddress OBJECT-TYPE
|
|
SYNTAX LldpManAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the management address
|
|
component associated with the remote system. It is reported
|
|
in the Address TLV of the most recently received CDP message.
|
|
And it is associated with rcLldpPortCdpRemAddressType"
|
|
::= { rcLldpPortCdpRemEntry 4 }
|
|
|
|
rcLldpPortCdpRemVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Version string as reported in CDP message"
|
|
::= { rcLldpPortCdpRemEntry 5 }
|
|
|
|
rcLldpPortCdpRemDeviceIdType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
serialNumber(1),
|
|
macAddress(2),
|
|
other(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An indication of the format of Device Id (rcLldpPortCdpRemDeviceId)
|
|
of remote device."
|
|
::= { rcLldpPortCdpRemEntry 6 }
|
|
|
|
rcLldpPortCdpRemDeviceId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of string of remote device as reported in CDP message.
|
|
The zero-length string indicates no Device-ID field TLV reported"
|
|
::= { rcLldpPortCdpRemEntry 7 }
|
|
|
|
rcLldpPortCdpRemPortId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the port component
|
|
associated with the remote system.
|
|
This will typically be the value of the ifName"
|
|
::= { rcLldpPortCdpRemEntry 8 }
|
|
|
|
rcLldpPortCdpRemPlatform OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Device's Hardware Platform as reported in the most
|
|
recent CDP message. The zero-length string indicates
|
|
that no Platform field (TLV) was reported in the most
|
|
recent CDP message."
|
|
::= { rcLldpPortCdpRemEntry 9 }
|
|
|
|
rcLldpPortCdpRemCapabilities OBJECT-TYPE
|
|
SYNTAX LldpSystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are supported on the retome system."
|
|
::= { rcLldpPortCdpRemEntry 10 }
|
|
|
|
rcLldpPortCdpRemSysName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system name of the
|
|
remote system. The valud of sysName MIB objec "
|
|
::= { rcLldpPortCdpRemEntry 11 }
|
|
|
|
rcLldpPortCdpRemLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the time when this cache entry was last changed.
|
|
This object is initialised to the current time when the entry
|
|
gets created and updated to the current time whenever the value
|
|
of any (other) object instance in the corresponding row is
|
|
modified."
|
|
::= { rcLldpPortCdpRemEntry 12}
|
|
|
|
-- extended LLDP remote Table
|
|
rcLldpRemExtendedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcLldpRemExtendedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table is a extended table of lldpRemTable.
|
|
It contains additional objects for lldpRemTable"
|
|
::= { rcLldpPort 3 }
|
|
|
|
rcLldpRemExtendedEntry OBJECT-TYPE
|
|
|
|
SYNTAX RcLldpRemExtendedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular physical network connection.
|
|
This entry is additinal objects of the lldpRemTable"
|
|
AUGMENTS {
|
|
lldpRemEntry
|
|
}
|
|
::= { rcLldpRemExtendedTable 1 }
|
|
|
|
RcLldpRemExtendedEntry ::= SEQUENCE {
|
|
rcLldpRemExtendedProtocolType INTEGER,
|
|
rcLldpRemExtendedIpAddress IpAddress
|
|
}
|
|
|
|
rcLldpRemExtendedProtocolType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
lldp(1),
|
|
cdp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the entry is CDP or LLDP protocol"
|
|
::= { rcLldpRemExtendedEntry 1 }
|
|
|
|
rcLldpRemExtendedIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The neighbor Ip address"
|
|
::= { rcLldpRemExtendedEntry 2}
|
|
|
|
|
|
-- --------------------------------------------------------------
|
|
-- MLD MIB Groups
|
|
--
|
|
|
|
|
|
rcMldObjects OBJECT IDENTIFIER ::= { rcMld 1 }
|
|
rcMldNotification OBJECT IDENTIFIER ::= { rcMld 2 }
|
|
|
|
--New MLD Group Table.
|
|
|
|
rcMldNewGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMldNewGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table listing the multicast
|
|
groups configured in the device."
|
|
::= { rcMldObjects 1 }
|
|
|
|
rcMldNewGroupEntry OBJECT-TYPE
|
|
SYNTAX RcMldNewGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) representing an
|
|
Mld group."
|
|
INDEX {rcMldNewGroupIpv6Address, rcMldNewGroupMembers, rcMldNewGroupInPort}
|
|
::= { rcMldNewGroupTable 1 }
|
|
|
|
RcMldNewGroupEntry ::= SEQUENCE {
|
|
rcMldNewGroupIpv6Address Ipv6Address,
|
|
rcMldNewGroupMembers Ipv6Address,
|
|
rcMldNewGroupInPort InterfaceIndex,
|
|
rcMldNewGroupExpiration Integer32,
|
|
rcMldNewGroupIfIndex InterfaceIndex
|
|
--rcMldNewGroupUserId DisplayString,
|
|
--rcMldNewGroupMemberState INTEGER,
|
|
--rcMldNewGroupSessionTime Integer32
|
|
}
|
|
|
|
rcMldNewGroupIpv6Address OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Multicast Group Address that others
|
|
want to join to. A group address can be the same
|
|
for many incoming ports."
|
|
::= { rcMldNewGroupEntry 1 }
|
|
|
|
rcMldNewGroupMembers OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Address of a source that has sent group
|
|
report wishing to join this group."
|
|
::= { rcMldNewGroupEntry 2 }
|
|
|
|
rcMldNewGroupInPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcMldNewGroupEntry 3 }
|
|
|
|
rcMldNewGroupExpiration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time left before the group report expired on this
|
|
port. Only one of this variable port. This
|
|
variable is updated upon receiving a group report."
|
|
::= { rcMldNewGroupEntry 4 }
|
|
|
|
rcMldNewGroupIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcMldNewGroupEntry 5 }
|
|
|
|
--rcMldNewGroupUserId OBJECT-TYPE
|
|
-- SYNTAX DisplayString (SIZE(0..32))
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "User-id sending this group"
|
|
-- ::= { rcMldNewGroupEntry 6 }
|
|
|
|
--rcMldNewGroupMemberState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- noState(1),
|
|
-- auth(2),
|
|
-- accStart(3),
|
|
-- authAndAcctStart(4),
|
|
-- authAndAcctDisabled(5)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Used for IGAP, to indicated member state."
|
|
-- ::= { rcMldNewGroupEntry 7 }
|
|
|
|
--rcMldNewGroupSessionTime OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Used for IGAP, to indicated the session time
|
|
-- in seconds for the member. Session time is
|
|
-- started after traffic is available to member.
|
|
-- It can be also called AccountingTime since its
|
|
-- values correspondes to the accounting duration of
|
|
-- IGAP user session."
|
|
-- ::= { rcMldNewGroupEntry 8 }
|
|
|
|
|
|
|
|
|
|
-- MLD
|
|
|
|
rcMldInterfaceExtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMldInterfaceExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { rcMldObjects 2 }
|
|
|
|
rcMldInterfaceExtnEntry OBJECT-TYPE
|
|
SYNTAX RcMldInterfaceExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { rcMldInterfaceExtnIfIndex }
|
|
::= { rcMldInterfaceExtnTable 1 }
|
|
|
|
RcMldInterfaceExtnEntry ::=
|
|
SEQUENCE {
|
|
rcMldInterfaceExtnIfIndex InterfaceIndex,
|
|
rcMldInterfaceExtnSnoopEnable TruthValue,
|
|
-- rcMldInterfaceExtnProxySnoopEnable TruthValue,
|
|
-- rcMldInterfaceExtnMaxAdvertiseInterval INTEGER,
|
|
-- rcMldInterfaceExtnMinAdvertiseInterval INTEGER,
|
|
-- rcMldInterfaceExtnMaxInitialAdvertiseInterval Integer32,
|
|
-- rcMldInterfaceExtnMaxInitialAdvertments Integer32,
|
|
-- rcMldInterfaceExtnNeighborDeadInterval Integer32,
|
|
-- rcMldInterfaceExtnFastLeaveEnable TruthValue,
|
|
-- rcMldInterfaceExtnFastLeavePortMembers PortSet,
|
|
-- rcMldInterfaceExtnMrdiscEnable TruthValue,
|
|
-- rcMldInterfaceExtnDiscoveredRouterPorts PortSet,
|
|
-- rcMldInterfaceExtnSnoopMRouterPorts PortSet,
|
|
-- rcMldInterfaceExtnSnoopActiveMRouterPorts PortSet,
|
|
-- rcMldInterfaceExtnSnoopMRouterExpiration Integer32,
|
|
rcMldInterfaceExtnFlushAction INTEGER,
|
|
-- rcMldInterfaceExtnRouterAlertEnable EnableValue,
|
|
rcMldInterfaceExtnSsmEnable TruthValue,
|
|
-- rcMldInterfaceExtnIgapEnable EnableValue,
|
|
-- rcMldInterfaceExtnAccntEnable EnableValue,
|
|
-- rcMldInterfaceExtnAuthEnable EnableValue,
|
|
-- rcMldInterfaceExtnStreamLimitEnable EnableValue,
|
|
-- rcMldInterfaceExtnMaxStreams Integer32,
|
|
-- rcMldInterfaceExtnNumStreams Integer32,
|
|
rcMldInterfaceExtnNewQuerier Ipv6Address,
|
|
-- rcMldInterfaceExtnSnoopQuerierEnable TruthValue,
|
|
-- rcMldInterfaceExtnSnoopQuerierAddr Ipv6Address,
|
|
-- rcMldInterfaceExtnMvrEnable TruthValue,
|
|
-- rcMldInterfaceExtnMvrProxyEnable TruthValue,
|
|
rcMldInterfaceExtnDynamicDowngradeEnable TruthValue,
|
|
-- rcMldInterfaceExtnCompatibilityModeEnable TruthValue,
|
|
rcMldInterfaceExtnOperVersion INTEGER,
|
|
-- rcMldInterfaceExtnExplicitHostTrackingEnable TruthValue,
|
|
rcMldInterfaceExtnMcastMode INTEGER
|
|
}
|
|
|
|
rcMldInterfaceExtnIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN)"
|
|
::= { rcMldInterfaceExtnEntry 1 }
|
|
|
|
rcMldInterfaceExtnSnoopEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable snoop on interface"
|
|
::= { rcMldInterfaceExtnEntry 2 }
|
|
|
|
-- rcMldInterfaceExtnProxySnoopEnable OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "enable proxy snoop."
|
|
-- ::= { rcMldInterfaceExtnEntry 3 }
|
|
|
|
--rcMldInterfaceExtnMaxAdvertiseInterval OBJECT-TYPE
|
|
-- SYNTAX INTEGER(2..180)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION ""
|
|
-- DEFVAL { 20 }
|
|
-- ::= { rcMldInterfaceExtnEntry 4 }
|
|
|
|
-- rcMldInterfaceExtnMinAdvertiseInterval OBJECT-TYPE
|
|
-- SYNTAX INTEGER(3..180)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION ""
|
|
-- DEFVAL { 15 }
|
|
-- ::= { rcMldInterfaceExtnEntry 5 }
|
|
|
|
-- rcMldInterfaceExtnMaxInitialAdvertiseInterval OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION ""
|
|
-- DEFVAL { 2 }
|
|
-- ::= { rcMldInterfaceExtnEntry 6 }
|
|
|
|
-- rcMldInterfaceExtnMaxInitialAdvertments OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION ""
|
|
-- DEFVAL { 3 }
|
|
-- ::= { rcMldInterfaceExtnEntry 7 }
|
|
|
|
-- rcMldInterfaceExtnNeighborDeadInterval OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION ""
|
|
-- DEFVAL { 60 }
|
|
-- ::= { rcMldInterfaceExtnEntry 8 }
|
|
|
|
--rcMldInterfaceExtnFastLeaveEnable OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Enable fast leave on this interface."
|
|
-- DEFVAL { false }
|
|
-- ::= { rcMldInterfaceExtnEntry 9 }
|
|
|
|
--rcMldInterfaceExtnFastLeavePortMembers OBJECT-TYPE
|
|
-- SYNTAX PortSet
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "The set of ports that are enabled for fast leave."
|
|
-- ::= { rcMldInterfaceExtnEntry 10 }
|
|
|
|
--rcMldInterfaceExtnMrdiscEnable OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Enable/disable multicast router discovery."
|
|
-- ::= { rcMldInterfaceExtnEntry 11 }
|
|
|
|
--rcMldInterfaceExtnDiscoveredRouterPorts OBJECT-TYPE
|
|
-- SYNTAX PortSet
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "list of ports that discovered by
|
|
-- MLD Multicast router discovery
|
|
-- (MRDISC) protocol."
|
|
-- ::= { rcMldInterfaceExtnEntry 12 }
|
|
|
|
--rcMldInterfaceExtnSnoopMRouterPorts OBJECT-TYPE
|
|
-- SYNTAX PortSet
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "The set of ports in this interface that provide
|
|
-- connectivity to the IPv6 Multicast router."
|
|
-- ::= { rcMldInterfaceExtnEntry 13 }
|
|
|
|
--rcMldInterfaceExtnSnoopActiveMRouterPorts OBJECT-TYPE
|
|
-- SYNTAX PortSet
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Active ports."
|
|
-- ::= { rcMldInterfaceExtnEntry 14 }
|
|
|
|
--rcMldInterfaceExtnSnoopMRouterExpiration OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Multicast querier router aging time out."
|
|
-- ::= { rcMldInterfaceExtnEntry 15 }
|
|
|
|
rcMldInterfaceExtnFlushAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
flushGrpMember(2),
|
|
flushMrouter(3),
|
|
flushSender(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MLD flush action"
|
|
::= { rcMldInterfaceExtnEntry 16 }
|
|
|
|
--rcMldInterfaceExtnRouterAlertEnable OBJECT-TYPE
|
|
-- SYNTAX EnableValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Enable Router Alert Check."
|
|
-- ::= { rcMldInterfaceExtnEntry 17 }
|
|
|
|
rcMldInterfaceExtnSsmEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable SSM."
|
|
::= { rcMldInterfaceExtnEntry 18 }
|
|
|
|
--rcMldInterfaceExtnIgapEnable OBJECT-TYPE
|
|
-- SYNTAX EnableValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "enable/disable IGAP."
|
|
-- DEFVAL { enable }
|
|
-- ::= { rcMldInterfaceExtnEntry 19 }
|
|
|
|
--rcMldInterfaceExtnAccntEnable OBJECT-TYPE
|
|
-- SYNTAX EnableValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "enable/disable accounting."
|
|
-- DEFVAL { enable }
|
|
-- ::= { rcMldInterfaceExtnEntry 20 }
|
|
|
|
--rcMldInterfaceExtnAuthEnable OBJECT-TYPE
|
|
-- SYNTAX EnableValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "enable/disable authentication."
|
|
-- DEFVAL { enable }
|
|
-- ::= { rcMldInterfaceExtnEntry 21 }
|
|
|
|
--rcMldInterfaceExtnStreamLimitEnable OBJECT-TYPE
|
|
-- SYNTAX EnableValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Stream Limitation enable/disable."
|
|
-- DEFVAL { enable }
|
|
-- ::= { rcMldInterfaceExtnEntry 22 }
|
|
|
|
--rcMldInterfaceExtnMaxStreams OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Maximum number of stream."
|
|
-- DEFVAL { 4 }
|
|
-- ::= { rcMldInterfaceExtnEntry 23 }
|
|
|
|
-- rcMldInterfaceExtnNumStreams OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Current number of streams."
|
|
-- ::= { rcMldInterfaceExtnEntry 24 }
|
|
|
|
rcMldInterfaceExtnNewQuerier OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address of the new MLD querier."
|
|
::= { rcMldInterfaceExtnEntry 25 }
|
|
|
|
--rcMldInterfaceExtnSnoopQuerierEnable OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "enable snoop querier."
|
|
-- ::= { rcMldInterfaceExtnEntry 26 }
|
|
|
|
--rcMldInterfaceExtnSnoopQuerierAddr OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "The pseudo address of the MLD Snoop Querier."
|
|
-- ::= { rcMldInterfaceExtnEntry 27 }
|
|
|
|
--rcMldInterfaceExtnMvrEnable OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Enable or disable mcast-vlan-registration on a vlan, it
|
|
-- is used to specified a vlan works as a mcast-vlan,
|
|
-- maximum 16 mcast-vlan is supported."
|
|
-- ::= { rcMldInterfaceExtnEntry 28 }
|
|
|
|
--rcMldInterfaceExtnMvrProxyEnable OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "enable or disable mcast-vlan-registration proxy on a vlan,
|
|
-- you must enable mcast-vlan-registration at first."
|
|
-- ::= { rcMldInterfaceExtnEntry 29 }
|
|
|
|
rcMldInterfaceExtnDynamicDowngradeEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable dynamic downgrade the MLD version when older version query message was received."
|
|
DEFVAL { true }
|
|
::= { rcMldInterfaceExtnEntry 30 }
|
|
|
|
--rcMldInterfaceExtnCompatibilityModeEnable OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "enable v1 v2 compatible mode, which will handle the MLD v1 message in v2 interface"
|
|
-- DEFVAL { false }
|
|
-- ::= { rcMldInterfaceExtnEntry 31 }
|
|
|
|
rcMldInterfaceExtnOperVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
version1(1),
|
|
version2(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The operational version of MLD which is running on this interface."
|
|
::= { rcMldInterfaceExtnEntry 32 }
|
|
|
|
--rcMldInterfaceExtnExplicitHostTrackingEnable OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Enable the Mld protocol running in version 2 to track hosts per channels/groups."
|
|
-- DEFVAL { false }
|
|
-- ::= { rcMldInterfaceExtnEntry 33 }
|
|
|
|
|
|
rcMldInterfaceExtnMcastMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
snoop(1),
|
|
pim(2),
|
|
snoopSpb(3),
|
|
routerSpb(4),
|
|
dvmrp(5),
|
|
none(6) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MLD interface mode."
|
|
::= { rcMldInterfaceExtnEntry 34 }
|
|
|
|
|
|
|
|
-- MLD SSM
|
|
|
|
rcMldSsmGlobal OBJECT IDENTIFIER ::= { rcMldObjects 3 }
|
|
|
|
|
|
rcMldSsmGlobalRangeGroup OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If multicast group address & RangeMask == RangeGroup,
|
|
then RangeGroup is in Ssm Range. Else it is not in
|
|
the range."
|
|
::= { rcMldSsmGlobal 1 }
|
|
|
|
rcMldSsmGlobalRangeMask OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Used with RangeGroup."
|
|
::= { rcMldSsmGlobal 2 }
|
|
|
|
|
|
-- rcMldSnoopTrace
|
|
|
|
rcMldSnoopTraceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMldSnoopTraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table listing the multicast groups
|
|
traversing the snoop enabled router"
|
|
::= { rcMldObjects 4 }
|
|
|
|
rcMldSnoopTraceEntry OBJECT-TYPE
|
|
SYNTAX RcMldSnoopTraceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The entry listing the multicast groups
|
|
traversing the snoop enabled router"
|
|
INDEX { rcMldSnoopGrpAddr, rcMldSnoopSrcAddr, rcMldSnoopOutVlan}
|
|
|
|
::= { rcMldSnoopTraceTable 1 }
|
|
|
|
RcMldSnoopTraceEntry ::=
|
|
SEQUENCE {
|
|
rcMldSnoopGrpAddr Ipv6Address,
|
|
rcMldSnoopSrcAddr Ipv6Address,
|
|
rcMldSnoopOutVlan InterfaceIndex,
|
|
rcMldSnoopInPort InterfaceIndex,
|
|
rcMldSnoopInVlan InterfaceIndex,
|
|
rcMldSnoopOutPort PortSet,
|
|
rcMldSnoopType INTEGER
|
|
}
|
|
|
|
rcMldSnoopGrpAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip multicast address of group traversing the router"
|
|
::= { rcMldSnoopTraceEntry 1 }
|
|
|
|
rcMldSnoopSrcAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip source address of the multicast group address"
|
|
::= { rcMldSnoopTraceEntry 2 }
|
|
|
|
rcMldSnoopOutVlan OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Egress vlan id for the multicast group"
|
|
::= { rcMldSnoopTraceEntry 3 }
|
|
|
|
rcMldSnoopInPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ingress port for the multicast group"
|
|
::= { rcMldSnoopTraceEntry 4 }
|
|
|
|
rcMldSnoopInVlan OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Ingress vlan id for the multicast source"
|
|
::= { rcMldSnoopTraceEntry 5 }
|
|
|
|
rcMldSnoopOutPort OBJECT-TYPE
|
|
SYNTAX PortSet
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Egress port of the multicast group"
|
|
::= { rcMldSnoopTraceEntry 6 }
|
|
|
|
rcMldSnoopType OBJECT-TYPE
|
|
SYNTAX INTEGER{ network(1), access(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port type on which the snoop entry is learnt"
|
|
::= { rcMldSnoopTraceEntry 7}
|
|
|
|
|
|
|
|
--The MLDv2 Router Cache Table
|
|
|
|
rcMldv2CacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMldv2CacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table listing the MLDv2 specific data
|
|
corresponding to each interface, port and multicast group pair on
|
|
a Router."
|
|
::= { rcMldObjects 5 }
|
|
|
|
rcMldv2CacheEntry OBJECT-TYPE
|
|
SYNTAX RcMldv2CacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) representing an Mldv2 Group."
|
|
INDEX { rcMldv2CacheEntryGroupAddress,
|
|
rcMldv2CacheEntryIfIndex,
|
|
rcMldv2CacheEntryInPort
|
|
}
|
|
::= { rcMldv2CacheTable 1 }
|
|
|
|
RcMldv2CacheEntry ::= SEQUENCE {
|
|
rcMldv2CacheEntryGroupAddress Ipv6Address,
|
|
rcMldv2CacheEntryIfIndex InterfaceIndex,
|
|
rcMldv2CacheEntryInPort InterfaceIndex,
|
|
--rcMldv2CacheEntryModeExpiryTimer Integer32,
|
|
rcMldv2CacheEntryVersion1HostTimer Integer32,
|
|
rcMldv2CacheEntrySourceFilterMode INTEGER
|
|
}
|
|
|
|
|
|
rcMldv2CacheEntryGroupAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Multicast group Address that others
|
|
want to join. A group address can be the same
|
|
for many incoming ports."
|
|
::= { rcMldv2CacheEntry 1 }
|
|
|
|
rcMldv2CacheEntryIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcMldv2CacheEntry 2 }
|
|
|
|
rcMldv2CacheEntryInPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcMldv2CacheEntry 3 }
|
|
|
|
-- rcMldv2CacheEntryModeExpiryTimer OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "This value is applicable only to MLDv2-compatible nodes
|
|
-- and represents the time remaining before the interface
|
|
-- EXCLUDE state expires and the interface state transitions
|
|
-- to INCLUDE mode. This value can never be greater than
|
|
-- rcMldNewGroupExpiration."
|
|
-- ::= { rcMldv2CacheEntry 4 }
|
|
|
|
rcMldv2CacheEntryVersion1HostTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time remaining until the local router will assume that
|
|
there are no longer any MLD version 1 members on the IP
|
|
subnet attached to this interface. This entry only applies
|
|
to MLDv1 hosts. Upon hearing any MLDv1 Report, this
|
|
value is reset to the group membership timer. While this
|
|
time remaining is non-zero, the local router ignores any
|
|
MLDv2 Leave messages for this group that it receives
|
|
on this interface."
|
|
::= { rcMldv2CacheEntry 5 }
|
|
|
|
|
|
rcMldv2CacheEntrySourceFilterMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include (1),
|
|
exclude (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current group state, applicable to MLDv2-compatible
|
|
nodes. The value indicates whether the state is INCLUDE or
|
|
EXCLUDE."
|
|
::= { rcMldv2CacheEntry 6 }
|
|
|
|
|
|
|
|
|
|
|
|
--The MLDv2 Router Source list Table
|
|
|
|
--
|
|
-- This information helps to interpret the content of the rcMldRouterSrcListTable.
|
|
-- 1. rcMldRouterSrcListHostAddress is not zero; rcMldRouterSrcListMemberAddress is zero.
|
|
-- This is the case when we have a source in the include list and no receiver asked it
|
|
-- explicitly (conflict source).
|
|
-- Ex: Two receivers present; one receiver is in EXLCUDE{S1} and the other one is in
|
|
-- EXLCUDE{S2}. The group state is EXCLUDE("S2","NULL").
|
|
-- 2. rcMldRouterSrcListHostAddress is not zero, rcMldRouterSrcListMemberAddress is not zero.
|
|
-- This is the case when a receiver asked to receive traffic for a specific source.
|
|
-- Ex: One receiver present in INCLUDE{S1}
|
|
-- 3. rcMldRouterSrcListHostAddress is not zero, rcMldRouterSrcListMemberAddress is zero.
|
|
-- This represent a source that needs to be blocked.
|
|
-- 4. rcMldRouterSrcListHostAddres is zero rcMldRouterSrcListMemberAddress is not zero.
|
|
-- The source zero is used to track the members that are in exclude mode
|
|
-- Ex: One receiver R1 in EXCLUDE(S1). Two entries are present in this table.
|
|
-- 4.1. rcMldRouterSrcListHostAddres = S1, rcMldRouterSrcListMemberAddress = 0 - blocked source.
|
|
-- 4.2. rcMldRouterSrcListHostAddres = 0, rcMldRouterSrcListMemberAddress = R1 - tracked member in exlcude mode.
|
|
--
|
|
-- If the explicit host tracking is not enabled the only the last reporter for a specific source or group
|
|
-- will be present in this table.
|
|
--
|
|
|
|
|
|
|
|
rcMldRouterSrcListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMldRouterSrcListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table listing the Source List entries
|
|
corresponding to each interface and multicast group pair on
|
|
a Router."
|
|
::= { rcMldObjects 6 }
|
|
|
|
rcMldRouterSrcListEntry OBJECT-TYPE
|
|
SYNTAX RcMldRouterSrcListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) representing an
|
|
Mld Source."
|
|
INDEX { rcMldRouterSrcListGroupAddress,
|
|
rcMldRouterSrcListIfIndex,
|
|
rcMldRouterSrcListInPort,
|
|
rcMldRouterSrcListHostAddress,
|
|
rcMldRouterSrcListMemberAddress
|
|
}
|
|
::= { rcMldRouterSrcListTable 1 }
|
|
|
|
RcMldRouterSrcListEntry ::= SEQUENCE {
|
|
rcMldRouterSrcListGroupAddress Ipv6Address,
|
|
rcMldRouterSrcListIfIndex InterfaceIndex,
|
|
rcMldRouterSrcListInPort InterfaceIndex,
|
|
rcMldRouterSrcListHostAddress Ipv6Address,
|
|
rcMldRouterSrcListMemberAddress Ipv6Address,
|
|
rcMldRouterSrcListExpire Integer32,
|
|
rcMldRouterSrcListMode INTEGER,
|
|
rcMldRouterSrcListMemberExpire Integer32
|
|
}
|
|
|
|
rcMldRouterSrcListGroupAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IPv6 multicast group address for which this entry
|
|
contains information."
|
|
::= { rcMldRouterSrcListEntry 1 }
|
|
|
|
rcMldRouterSrcListIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The interface for which this entry contains information
|
|
for an IP multicast group address."
|
|
::= { rcMldRouterSrcListEntry 2 }
|
|
|
|
rcMldRouterSrcListInPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports for this
|
|
source."
|
|
::= { rcMldRouterSrcListEntry 3 }
|
|
|
|
rcMldRouterSrcListHostAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The host address to which this entry corresponds."
|
|
::= { rcMldRouterSrcListEntry 4 }
|
|
|
|
rcMldRouterSrcListMemberAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 Address of a member that has sent source specific
|
|
report wishing to join this source."
|
|
::= { rcMldRouterSrcListEntry 5 }
|
|
|
|
rcMldRouterSrcListExpire OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value indicates the relevance of the SrcList entry,
|
|
whereby a non-zero value indicates this is an INCLUDE state
|
|
value, and a zero value indicates this to be an EXCLUDE
|
|
state value."
|
|
::= { rcMldRouterSrcListEntry 6 }
|
|
|
|
rcMldRouterSrcListMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
include (1),
|
|
exclude (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current member state, applicable to MLDv2-compatible
|
|
nodes. The value indicates whether the state is INCLUDE or
|
|
EXCLUDE."
|
|
::= { rcMldRouterSrcListEntry 7 }
|
|
|
|
rcMldRouterSrcListMemberExpire OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This value indicates the time until the member for this source
|
|
will expire"
|
|
::= { rcMldRouterSrcListEntry 8 }
|
|
|
|
|
|
|
|
rcMldSenderTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMldSenderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table listing the multicast
|
|
senders."
|
|
::= { rcMldObjects 7 }
|
|
|
|
rcMldSenderEntry OBJECT-TYPE
|
|
SYNTAX RcMldSenderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) representing an
|
|
MLD senser."
|
|
INDEX { rcMldSenderGrpAddr, rcMldSenderIfIndex,
|
|
rcMldSenderMemberAddr }
|
|
::= { rcMldSenderTable 1 }
|
|
|
|
RcMldSenderEntry ::=
|
|
SEQUENCE {
|
|
rcMldSenderGrpAddr Ipv6Address,
|
|
rcMldSenderIfIndex InterfaceIndex,
|
|
rcMldSenderMemberAddr Ipv6Address,
|
|
rcMldSenderAction INTEGER,
|
|
rcMldSenderPort InterfaceIndex
|
|
}
|
|
|
|
rcMldSenderGrpAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 multicast group address."
|
|
::= { rcMldSenderEntry 1 }
|
|
|
|
rcMldSenderIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Interface index of the sender."
|
|
::= { rcMldSenderEntry 2 }
|
|
|
|
rcMldSenderMemberAddr OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ipv6 Host Address."
|
|
::= { rcMldSenderEntry 3 }
|
|
|
|
rcMldSenderAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
flushEntry(2),
|
|
flushGrp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "none(1), flushEntry(2), flushGrp(3)."
|
|
::= { rcMldSenderEntry 4 }
|
|
|
|
rcMldSenderPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mld Sender port."
|
|
::= { rcMldSenderEntry 5 }
|
|
|
|
|
|
|
|
|
|
|
|
-- MLD Globals
|
|
rcMldGlobalGroup OBJECT IDENTIFIER ::= { rcMld 3 }
|
|
|
|
rcMldGenerateTrap OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling the MLD to generate trap."
|
|
DEFVAL { disable }
|
|
::= { rcMldGlobalGroup 1 }
|
|
|
|
rcMldGenerateLog OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enabling the MLD to generate log."
|
|
DEFVAL { disable }
|
|
::= { rcMldGlobalGroup 2 }
|
|
|
|
|
|
-- Elements used in traps
|
|
|
|
rcMldNotificationInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The internetwork-layer interface value of the interface
|
|
for which MLD is enabled."
|
|
::= { rcMldNotification 1 }
|
|
|
|
rcMldNotificationNewGroupIpv6Address OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "Multicast Group Address that others
|
|
want to join to. A group address can be the same
|
|
for many incoming ports."
|
|
::= { rcMldNotification 2 }
|
|
|
|
rcMldNotificationNewGroupMembers OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "IP Address of a source that has sent group
|
|
report wishing to join this group."
|
|
::= { rcMldNotification 3 }
|
|
|
|
rcMldNotificationNewGroupInPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION "An unique value to identify a physical
|
|
interface or a logical interface (VLAN),
|
|
which has received Group reports from various
|
|
sources."
|
|
::= { rcMldNotification 4 }
|
|
|
|
|
|
-- Table rcIpv6MulticastTimedPruneTable and rcIpv6MulticastSoftwareForwarding are not supported
|
|
-- in first release but are defined as placeholders
|
|
|
|
--rcIpv6MulticastTimedPruneTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF RcIpv6MulticastTimedPruneEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "This feature provides the ability for the user to
|
|
-- create (S,G) Forwarding Entries that would not be
|
|
-- pruned until a configurable timer expires. Currently
|
|
-- the timer value is set to 0."
|
|
-- ::= { rcIp 112 }
|
|
--
|
|
--rcIpv6MulticastTimedPruneEntry OBJECT-TYPE
|
|
-- SYNTAX RcIpv6MulticastTimedPruneEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "An entry of IPv6 Multicast Timed Prune Table."
|
|
-- INDEX { rcIpv6MulticastTimedPruneGroupAddress,
|
|
-- rcIpv6MulticastTimedPruneSourceAddress,
|
|
-- rcIpv6MulticastTimedPruneSrcSubnetMask }
|
|
-- ::= { rcIpv6MulticastTimedPruneTable 1 }
|
|
--
|
|
--RcIpv6MulticastTimedPruneEntry ::=
|
|
-- SEQUENCE {
|
|
-- rcIpv6MulticastTimedPruneGroupAddress Ipv6Address,
|
|
-- rcIpv6MulticastTimedPruneSourceAddress Ipv6Address,
|
|
-- rcIpv6MulticastTimedPruneSrcSubnetMask Ipv6Address,
|
|
-- rcIpv6MulticastTimedPruneAgingTimer Integer32,
|
|
-- rcIpv6MulticastTimedPruneTimeLeft Integer32,
|
|
-- rcIpv6MulticastTimedPruneLastActivity TimeTicks,
|
|
-- rcIpv6MulticastTimedPruneRowStatus RowStatus
|
|
-- }
|
|
--
|
|
--rcIpv6MulticastTimedPruneGroupAddress OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "This field indicates the IPv6 Multicast Group
|
|
-- Address associated with the IPv6 multicast stream."
|
|
-- ::= { rcIpv6MulticastTimedPruneEntry 1 }
|
|
--
|
|
--rcIpv6MulticastTimedPruneSourceAddress OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "This is the Source Subnet IPv6 address of the
|
|
-- sender of the IPv6 multicast stream."
|
|
-- ::= { rcIpv6MulticastTimedPruneEntry 2 }
|
|
--
|
|
--rcIpv6MulticastTimedPruneSrcSubnetMask OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "This is the Source Subnet Mask IPv6 address of
|
|
-- the sender of the IPv6 multicast stream."
|
|
-- ::= { rcIpv6MulticastTimedPruneEntry 3 }
|
|
--
|
|
--rcIpv6MulticastTimedPruneAgingTimer OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "This field represents the amount of time
|
|
-- (in minutes) this timed prune entry will be
|
|
-- kept in the forwarding table when there are no
|
|
-- more receivers. After this timer expires, this
|
|
-- timed prune entry would be treated as a normal
|
|
-- DVMRP/PIM forwarding entry. Aging Timer value of
|
|
-- 0 (infinite time) indicates this timed prune entry
|
|
-- will not be deleted even when there are no
|
|
-- more receivers."
|
|
-- DEFVAL { 5 }
|
|
-- ::= { rcIpv6MulticastTimedPruneEntry 4 }
|
|
--
|
|
--rcIpv6MulticastTimedPruneTimeLeft OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "This read-only field represents the remaining time
|
|
-- for which this timed prune entry will be kept in
|
|
-- the forwarding table. After this timer expires,
|
|
-- this timed prune entry would be treated as a normal
|
|
-- DVMRP/PIM forwarding entry. 0 in this field indicates
|
|
-- that this entry would not be aged out."
|
|
-- ::= { rcIpv6MulticastTimedPruneEntry 5 }
|
|
--
|
|
--rcIpv6MulticastTimedPruneLastActivity OBJECT-TYPE
|
|
-- SYNTAX TimeTicks
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "This read-only field represents the actual time since
|
|
-- the traffic has come from this Source, Group pair."
|
|
-- ::= { rcIpv6MulticastTimedPruneEntry 6 }
|
|
--
|
|
--rcIpv6MulticastTimedPruneRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "row status"
|
|
-- ::= { rcIpv6MulticastTimedPruneEntry 7 }
|
|
--
|
|
--
|
|
--
|
|
--rcIpv6MulticastSoftwareForwarding OBJECT IDENTIFIER ::= { rcIp 113 }
|
|
--
|
|
--rcIpv6MulticastSoftwareForwardingEnable OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Enable/Disable multicast software forwarding."
|
|
-- DEFVAL { false }
|
|
-- ::= { rcIpv6MulticastSoftwareForwarding 1 }
|
|
--
|
|
--rcIpv6MulticastSoftwareForwardingThreshold OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Threshold to switch from software forwarding to hardware forwarding. Unit = pkt per second"
|
|
-- DEFVAL { 5 }
|
|
-- ::= { rcIpv6MulticastSoftwareForwarding 2 }
|
|
|
|
|
|
rcPimIpv6Objects OBJECT IDENTIFIER ::= { rcPimIpv6 1 }
|
|
|
|
rcPimIpv6JoinPruneInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..18724)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default interval at which periodic PIM-SM IPv6 Join/Prune
|
|
messages are to be sent."
|
|
::= { rcPimIpv6Objects 1 }
|
|
|
|
-- The PIM IPv6 Interface Table
|
|
|
|
rcPimIpv6InterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPimIpv6InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's PIM IPv6 interfaces.
|
|
IGMP and PIM are enabled on all IPv6 interfaces listed in this
|
|
table."
|
|
::= { rcPimIpv6Objects 2 }
|
|
|
|
rcPimIpv6InterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcPimIpv6InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcPimIpv6InterfaceTable."
|
|
INDEX { rcPimIpv6InterfaceIfIndex }
|
|
::= { rcPimIpv6InterfaceTable 1 }
|
|
RcPimIpv6InterfaceEntry ::= SEQUENCE {
|
|
rcPimIpv6InterfaceIfIndex InterfaceIndex,
|
|
rcPimIpv6InterfaceAddress Ipv6Address,
|
|
rcPimIpv6InterfaceNetMask Ipv6Address,
|
|
rcPimIpv6InterfaceMode INTEGER,
|
|
rcPimIpv6InterfaceDR Ipv6Address,
|
|
rcPimIpv6InterfaceHelloInterval Unsigned32,
|
|
rcPimIpv6InterfaceRowStatus RowStatus,
|
|
rcPimIpv6InterfaceJoinPruneInterval Unsigned32
|
|
-- rcPimIpv6InterfaceCBSRPreference Integer32,
|
|
-- rcPimIpv6InterfaceCBSREnable INTEGER
|
|
}
|
|
|
|
rcPimIpv6InterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of this PIM interface."
|
|
::= { rcPimIpv6InterfaceEntry 1 }
|
|
|
|
rcPimIpv6InterfaceAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the PIM interface."
|
|
::= { rcPimIpv6InterfaceEntry 2 }
|
|
|
|
rcPimIpv6InterfaceNetMask OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask for the IPv6 address of the PIM interface."
|
|
::= { rcPimIpv6InterfaceEntry 3 }
|
|
|
|
rcPimIpv6InterfaceMode OBJECT-TYPE
|
|
SYNTAX INTEGER { dense(1), sparse(2), sparseDense(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured mode of this PIM interface."
|
|
DEFVAL { sparse }
|
|
::= { rcPimIpv6InterfaceEntry 4 }
|
|
|
|
rcPimIpv6InterfaceDR OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Designated Router on this PIM interface. For point-
|
|
to-point interfaces, this object has the value ::."
|
|
::= { rcPimIpv6InterfaceEntry 5 }
|
|
|
|
rcPimIpv6InterfaceHelloInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..18724)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency at which PIM Hello messages are transmitted
|
|
on this interface."
|
|
DEFVAL { 30 }
|
|
::= { rcPimIpv6InterfaceEntry 6 }
|
|
|
|
rcPimIpv6InterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. Creating the entry enables PIM
|
|
on the interface; destroying the entry disables PIM on the
|
|
interface."
|
|
::= { rcPimIpv6InterfaceEntry 7 }
|
|
|
|
rcPimIpv6InterfaceJoinPruneInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..18724)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency at which PIM Join/Prune messages are
|
|
transmitted on this PIM interface. The default value of
|
|
this object is the rcPimIpv6JoinPruneInterval."
|
|
::= { rcPimIpv6InterfaceEntry 8 }
|
|
|
|
--rcPimIpv6InterfaceCBSRPreference OBJECT-TYPE
|
|
-- SYNTAX Unsigned32 (-1..255)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The preference value for the local interface as a candidate
|
|
-- bootstrap router. The value of -1 is used to indicate that
|
|
-- the local interface is not a candidate BSR interface."
|
|
-- DEFVAL { -1 }
|
|
-- ::= { rcPimIpv6InterfaceEntry 9 }
|
|
|
|
--rcPimIpv6InterfaceCBSREnable OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- enabled(1),
|
|
-- disabled(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Enable/disable Candidate BSR on pim local interface."
|
|
-- DEFVAL { disabled }
|
|
-- ::= { rcPimIpv6InterfaceEntry 10 }
|
|
|
|
-- The PIM IPv6 Neighbor Table
|
|
|
|
rcPimIpv6NeighborTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPimIpv6NeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's PIM IPv6 neighbors."
|
|
::= { rcPimIpv6Objects 3 }
|
|
|
|
rcPimIpv6NeighborEntry OBJECT-TYPE
|
|
SYNTAX RcPimIpv6NeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcPimIpv6NeighborTable."
|
|
INDEX { rcPimIpv6NeighborIfIndex,
|
|
rcPimIpv6NeighborAddress}
|
|
|
|
::= { rcPimIpv6NeighborTable 1 }
|
|
|
|
RcPimIpv6NeighborEntry ::= SEQUENCE {
|
|
rcPimIpv6NeighborIfIndex InterfaceIndex,
|
|
rcPimIpv6NeighborAddress Ipv6Address,
|
|
rcPimIpv6NeighborUpTime TimeTicks,
|
|
rcPimIpv6NeighborExpiryTime TimeTicks
|
|
-- rcPimIpv6NeighborMode INTEGER
|
|
}
|
|
|
|
rcPimIpv6NeighborIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface used to reach this
|
|
PIM neighbor."
|
|
::= { rcPimIpv6NeighborEntry 1 }
|
|
|
|
|
|
rcPimIpv6NeighborAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the PIM neighbor for which this entry
|
|
contains information."
|
|
::= { rcPimIpv6NeighborEntry 2 }
|
|
|
|
|
|
rcPimIpv6NeighborUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since this PIM neighbor (last) became a neighbor
|
|
of the local router."
|
|
::= { rcPimIpv6NeighborEntry 3 }
|
|
|
|
rcPimIpv6NeighborExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time remaining before this PIM neighbor will be
|
|
aged out."
|
|
::= { rcPimIpv6NeighborEntry 4 }
|
|
|
|
|
|
-- The PIM IPv6 RP-Set Table
|
|
|
|
rcPimIpv6RPSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPimIpv6RPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM information for
|
|
candidate Rendezvous Points (RPs) for IPv6 multicast groups.
|
|
When the local router is the BSR, this information is
|
|
obtained from received Candidate-RP-Advertisements. When
|
|
the local router is not the BSR, this information is
|
|
obtained from received RP-Set messages."
|
|
::= { rcPimIpv6Objects 4 }
|
|
|
|
rcPimIpv6RPSetEntry OBJECT-TYPE
|
|
SYNTAX RcPimIpv6RPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcPimIpv6RPSetTable."
|
|
INDEX { rcPimIpv6RPSetComponent, rcPimIpv6RPSetGroupAddress,
|
|
rcPimIpv6RPSetGroupMask, rcPimIpv6RPSetAddress }
|
|
::= { rcPimIpv6RPSetTable 1 }
|
|
|
|
RcPimIpv6RPSetEntry ::= SEQUENCE {
|
|
rcPimIpv6RPSetComponent Unsigned32,
|
|
rcPimIpv6RPSetGroupAddress Ipv6Address,
|
|
rcPimIpv6RPSetGroupMask Ipv6Address,
|
|
rcPimIpv6RPSetAddress Ipv6Address,
|
|
rcPimIpv6RPSetHoldTime Unsigned32,
|
|
rcPimIpv6RPSetExpiryTime TimeTicks
|
|
}
|
|
|
|
|
|
rcPimIpv6RPSetComponent OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number uniquely identifying the component. Each protocol
|
|
instance connected to a separate domain should have a
|
|
different index value."
|
|
::= { rcPimIpv6RPSetEntry 1 }
|
|
|
|
rcPimIpv6RPSetGroupAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 multicast group address which, when combined with
|
|
rcPimIpv6RPSetGroupMask, gives the group prefix for which this
|
|
entry contains information about the Candidate-RP."
|
|
::= { rcPimIpv6RPSetEntry 2 }
|
|
|
|
rcPimIpv6RPSetGroupMask OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast group address mask which, when combined with
|
|
rcPimIpv6RPSetGroupAddress, gives the group prefix for which this
|
|
entry contains information about the Candidate-RP."
|
|
::= { rcPimIpv6RPSetEntry 3 }
|
|
|
|
rcPimIpv6RPSetAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the Candidate-RP."
|
|
::= { rcPimIpv6RPSetEntry 4 }
|
|
|
|
rcPimIpv6RPSetHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The holdtime of a Candidate-RP. If the local router is not
|
|
the BSR, this value is 0."
|
|
::= { rcPimIpv6RPSetEntry 5 }
|
|
|
|
rcPimIpv6RPSetExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time remaining before the Candidate-RP will be
|
|
declared down. If the local router is not the BSR, this
|
|
value is 0."
|
|
::= { rcPimIpv6RPSetEntry 6 }
|
|
|
|
-- The PIM IPv6 Candidate-RP Table
|
|
|
|
--rcPimIpv6CandidateRPTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF RcPimIpv6CandidateRPEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The (conceptual) table listing the IPv6 multicast groups for
|
|
-- which the local router is to advertise itself as a
|
|
-- Candidate-RP when the value of rcPimIpv6CandidateRPHoldTime is
|
|
-- non-zero. If this table is empty, then the local router
|
|
-- will advertise itself as a Candidate-RP for all groups
|
|
-- (providing the value of rcPimIpv6CandidateRPHoldTime is non-
|
|
-- zero)."
|
|
-- ::= { rcPimIpv6Objects 5 }
|
|
|
|
--rcPimIpv6CandidateRPEntry OBJECT-TYPE
|
|
-- SYNTAX RcPimIpv6CandidateRPEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry (conceptual row) in the rcPimIpv6CandidateRPTable."
|
|
-- INDEX { rcPimIpv6CandidateRPGroupAddress,
|
|
-- rcPimIpv6CandidateRPGroupMask, rcPimIpv6CandidateRPAddress }
|
|
-- ::= { rcPimIpv6CandidateRPTable 1 }
|
|
|
|
--RcPimIpv6CandidateRPEntry ::= SEQUENCE {
|
|
-- rcPimIpv6CandidateRPGroupAddress Ipv6Address,
|
|
-- rcPimIpv6CandidateRPGroupMask Ipv6Address,
|
|
-- rcPimIpv6CandidateRPAddress Ipv6Address,
|
|
-- rcPimIpv6CandidateRPRowStatus RowStatus
|
|
--}
|
|
|
|
--rcPimIpv6CandidateRPGroupAddress OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The IPv6 multicast group address which, when combined with
|
|
-- rcPimIpv6CandidateRPGroupMask, identifies a group prefix for which
|
|
-- the local router will advertise itself as a Candidate-RP."
|
|
-- ::= { rcPimIpv6CandidateRPEntry 1 }
|
|
|
|
--rcPimIpv6CandidateRPGroupMask OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The multicast group address mask which, when combined with
|
|
-- rcPimIpv6CandidateRPGroupMask, identifies a group prefix for which
|
|
-- the local router will advertise itself as a Candidate-RP."
|
|
-- ::= { rcPimIpv6CandidateRPEntry 2 }
|
|
|
|
--rcPimIpv6CandidateRPAddress OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The (unicast) address of the interface which will be
|
|
-- advertised as a Candidate-RP."
|
|
-- ::= { rcPimIpv6CandidateRPEntry 3 }
|
|
|
|
--rcPimIpv6CandidateRPRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The status of this row, by which new entries may be
|
|
-- created, or old entries deleted from this table."
|
|
-- ::= { rcPimIpv6CandidateRPEntry 4 }
|
|
|
|
-- The PIM Component Table
|
|
|
|
--rcPimIpv6ComponentTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF PimComponentEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The (conceptual) table containing objects specific to a PIM
|
|
-- domain. One row exists for each domain to which the router
|
|
-- is connected."
|
|
-- ::= { rcPimIpv6Objects 6 }
|
|
|
|
--rcPimIpv6ComponentEntry OBJECT-TYPE
|
|
-- SYNTAX PimComponentEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry (conceptual row) in the pimComponentTable."
|
|
-- INDEX { pimComponentIndex }
|
|
-- ::= { rcPimIpv6ComponentTable 1 }
|
|
|
|
|
|
--rcPimIpv6ComponentEntry ::= SEQUENCE {
|
|
-- rcPimIpv6ComponentIndex Unsigned32,
|
|
-- rcPimIpv6ComponentBSRAddress Ipv6Address,
|
|
-- rcPimIpv6ComponentBSRExpiryTime TimeTicks,
|
|
-- rcPimIpv6ComponentCRPHoldTime Unsigned32,
|
|
-- rcPimIpv6ComponentStatus RowStatus
|
|
--}
|
|
|
|
--rcPimIpv6ComponentIndex OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A number uniquely identifying the component. Each protocol
|
|
-- instance connected to a separate domain should have a
|
|
-- different index value."
|
|
-- ::= { rcPimIpv6ComponentEntry 1 }
|
|
|
|
--rcPimIpv6ComponentBSRAddress OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The IP address of the bootstrap router (BSR) for the local
|
|
-- PIM region."
|
|
-- ::= { rcPimIpv6ComponentEntry 2 }
|
|
|
|
--rcPimIpv6ComponentBSRExpiryTime OBJECT-TYPE
|
|
-- SYNTAX TimeTicks
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The minimum time remaining before the bootstrap router in
|
|
-- the local domain will be declared down. For candidate BSRs,
|
|
-- this is the time until the component sends an RP-Set
|
|
-- message. For other routers, this is the time until it may
|
|
-- accept an RP-Set message from a lower candidate BSR."
|
|
-- ::= { rcPimIpv6ComponentEntry 3 }
|
|
|
|
--rcPimIpv6ComponentCRPHoldTime OBJECT-TYPE
|
|
-- SYNTAX Unsigned32 (0..255)
|
|
-- UNITS "seconds"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The holdtime of the component when it is a candidate RP in
|
|
-- the local domain. The value of 0 is used to indicate that
|
|
-- the local system is not a Candidate-RP."
|
|
-- DEFVAL { 0 }
|
|
-- ::= { rcPimIpv6ComponentEntry 4 }
|
|
|
|
--rcPimIpv6ComponentStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The status of this entry. Creating the entry creates
|
|
-- another protocol instance; destroying the entry disables a
|
|
-- protocol instance."
|
|
-- ::= { rcPimIpv6ComponentEntry 5 }
|
|
|
|
|
|
|
|
-- The PIM IPv6 Neighbour Secondary Address List
|
|
|
|
rcPimIpv6NbrSecAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcPimIpv6NbrSecAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table listing the secondary addresses
|
|
advertised by each PIM neighbor (on a subset of the rows of
|
|
the rcPimIpv6NeighborTable defined)."
|
|
|
|
::= { rcPimIpv6Objects 7 }
|
|
|
|
rcPimIpv6NbrSecAddressEntry OBJECT-TYPE
|
|
SYNTAX RcPimIpv6NbrSecAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcPimIpv6NbrSecAddressTable."
|
|
INDEX { rcPimIpv6NbrSecAddressIfIndex,
|
|
rcPimIpv6NbrSecAddressType,
|
|
rcPimIpv6NbrSecAddressPrimary,
|
|
rcPimIpv6NbrSecAddress }
|
|
::= { rcPimIpv6NbrSecAddressTable 1 }
|
|
|
|
RcPimIpv6NbrSecAddressEntry ::= SEQUENCE {
|
|
rcPimIpv6NbrSecAddressIfIndex InterfaceIndex,
|
|
rcPimIpv6NbrSecAddressType InetAddressType,
|
|
rcPimIpv6NbrSecAddressPrimary InetAddress,
|
|
rcPimIpv6NbrSecAddress InetAddress
|
|
}
|
|
|
|
rcPimIpv6NbrSecAddressIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface used to reach this
|
|
PIM neighbor."
|
|
::= { rcPimIpv6NbrSecAddressEntry 1 }
|
|
rcPimIpv6NbrSecAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of this PIM neighbor."
|
|
::= { rcPimIpv6NbrSecAddressEntry 2 }
|
|
|
|
rcPimIpv6NbrSecAddressPrimary OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (4|8|16|20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary IP address of this PIM neighbor. The
|
|
InetAddressType is given by the rcPimIpv6NbrSecAddressType
|
|
object."
|
|
::= { rcPimIpv6NbrSecAddressEntry 3 }
|
|
|
|
rcPimIpv6NbrSecAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (4|8|16|20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secondary IP address of this PIM neighbor. The
|
|
InetAddressType is given by the pimNbrSecAddressType
|
|
object."
|
|
::= { rcPimIpv6NbrSecAddressEntry 4 }
|
|
|
|
|
|
--IPv6 PIM
|
|
|
|
rcIpv6Pim OBJECT IDENTIFIER ::= { rcIp 112 }
|
|
rcIpv6PimObjects OBJECT IDENTIFIER ::= { rcIpv6Pim 1 }
|
|
|
|
rcIpv6PimGlobal OBJECT IDENTIFIER ::= { rcIpv6PimObjects 1}
|
|
|
|
rcIpv6PimGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable PIM globally"
|
|
::= { rcIpv6PimGlobal 1 }
|
|
|
|
rcIpv6PimGlobalMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dm(1),
|
|
sm(2),
|
|
smdm(3),
|
|
ssm(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set PIM global mode to sparse or source specific"
|
|
::= { rcIpv6PimGlobal 2 }
|
|
|
|
--rcIpv6PimGlobalMbr OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "enable/disable pim multicast border router feature"
|
|
-- ::= { rcIpv6PimGlobal 3 }
|
|
|
|
rcIpv6PimGlobalRegisterSuppTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (10..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Each source's DR maintains, per (S,G), a
|
|
Register-Suppression-timer in seconds. The
|
|
Register-Suppression-timer is started by the
|
|
Register-Stop message; upon expiration, the source's
|
|
DR resumes sending data packets to the RP,
|
|
encapsulated in the Register message."
|
|
DEFVAL { 60 }
|
|
::= { rcIpv6PimGlobal 4 }
|
|
|
|
--rcIpv6PimGlobalInterfaceTableSize OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Size of the PIM table"
|
|
-- ::= { rcIpv6PimGlobal 5 }
|
|
|
|
rcIpv6PimGlobalUniRouteChgTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (2..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This timer allows a better tuning on how fast the
|
|
routing information is going to get updated from
|
|
RTM (the frequency at which the RTM is polled for
|
|
routing information updates)."
|
|
DEFVAL { 5 }
|
|
::= { rcIpv6PimGlobal 6 }
|
|
|
|
rcIpv6PimGlobalDiscardDataTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (5..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This timer is used to discard data until the Join
|
|
is received from the RP. A ipmc discard record is
|
|
created and deleted once the timer expires and/or
|
|
when a Join is received."
|
|
DEFVAL { 60 }
|
|
::= { rcIpv6PimGlobal 7 }
|
|
|
|
--rcIpv6PimGlobalCRPADVTimeOut OBJECT-TYPE
|
|
-- SYNTAX Unsigned32 (5..26214)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Routers configured as candidate RPs use this timer
|
|
-- to periodically send C-RP-Adv messages. Upon expiry,
|
|
-- a C-RP-Adv message is sent to the elected BSR."
|
|
-- DEFVAL { 60 }
|
|
-- ::= { rcIpv6PimGlobal 8 }
|
|
|
|
--rcIpv6PimGlobalBootStrapPeriod OBJECT-TYPE
|
|
-- SYNTAX Unsigned32 (5..32757)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "At the elected BSR, this is the interval between
|
|
-- originating Bootstrap messages."
|
|
-- DEFVAL { 60 }
|
|
-- ::= { rcIpv6PimGlobal 9 }
|
|
|
|
rcIpv6PimGlobalStaticRP OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable Static RP feature."
|
|
DEFVAL { false }
|
|
::= { rcIpv6PimGlobal 10 }
|
|
|
|
--rcIpv6PimGlobalActivityChkInterval OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- intv15(15),
|
|
-- intv30(30),
|
|
-- intv210(210)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Activity check interval for polling PIM SG traffic
|
|
-- activity information."
|
|
-- DEFVAL { intv210 }
|
|
-- ::= { rcIpv6PimGlobal 11 }
|
|
|
|
rcIpv6PimGlobalFwdCacheTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (10..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PIM forward cache expiry value in seconds.This
|
|
value is going to be used in aging PIM mroutes
|
|
in seconds."
|
|
DEFVAL { 210 }
|
|
::= { rcIpv6PimGlobal 12 }
|
|
|
|
--rcIpv6PimGlobalFastJoinPrune OBJECT-TYPE
|
|
-- SYNTAX EnableValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Enable/Disable PIM Fast Join Prune."
|
|
-- DEFVAL { disable }
|
|
-- ::= { rcIpv6PimGlobal 13 }
|
|
|
|
rcIpv6PimTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6PimEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 PIM table"
|
|
::= { rcIpv6PimObjects 2 }
|
|
|
|
rcIpv6PimEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6PimEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of IPv6 PIM Table."
|
|
INDEX { rcIpv6PimIfIndex }
|
|
::= { rcIpv6PimTable 1 }
|
|
|
|
RcIpv6PimEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6PimIfIndex InterfaceIndex,
|
|
rcIpv6PimEnable TruthValue,
|
|
rcIpv6PimMode INTEGER,
|
|
rcIpv6PimHelloInterval Unsigned32,
|
|
rcIpv6PimJoinPruneInterval Unsigned32,
|
|
-- rcIpv6PimCBSRPreference Integer32,
|
|
rcIpv6PimIntfType INTEGER
|
|
}
|
|
|
|
rcIpv6PimIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The value of ifIndex for the interface on which IPv6 PIM is set"
|
|
::= { rcIpv6PimEntry 1 }
|
|
|
|
rcIpv6PimEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable/Disable PIM on interface"
|
|
::= { rcIpv6PimEntry 2 }
|
|
|
|
rcIpv6PimMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dense(1),
|
|
sparse(2),
|
|
sparseDense(3),
|
|
ssm(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set PIM interface mode to sparse or source specific"
|
|
::= { rcIpv6PimEntry 3 }
|
|
|
|
rcIpv6PimHelloInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..18724)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The frequency at which PIM Hello messages are transmitted
|
|
on this interface."
|
|
DEFVAL { 30 }
|
|
::= { rcIpv6PimEntry 4 }
|
|
|
|
rcIpv6PimJoinPruneInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..18724)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The frequency at which PIM Join/Prune messages are
|
|
transmitted on this PIM interface."
|
|
::= { rcIpv6PimEntry 5 }
|
|
|
|
--rcIpv6PimCBSRPreference OBJECT-TYPE
|
|
-- SYNTAX Integer32 (-1..255)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION "Preference of BSR"
|
|
-- DEFVAL { -1 }
|
|
-- ::= { rcIpv6PimEntry 6 }
|
|
|
|
rcIpv6PimIntfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PIM interface type."
|
|
DEFVAL { active }
|
|
::= { rcIpv6PimEntry 7 }
|
|
|
|
-- PIM IPv6 Interface Table Extension
|
|
|
|
rcIpv6PimInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6PimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IPv6 PIM Interface table"
|
|
::= { rcIpv6PimObjects 3 }
|
|
|
|
rcIpv6PimInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6PimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of IPv6 PIM Interface Table."
|
|
INDEX { rcIpv6PimInterfaceIfIndex }
|
|
::= { rcIpv6PimInterfaceTable 1 }
|
|
|
|
RcIpv6PimInterfaceEntry ::=
|
|
SEQUENCE {
|
|
rcIpv6PimInterfaceIfIndex InterfaceIndex,
|
|
rcIpv6PimInterfaceOperState INTEGER,
|
|
rcIpv6PimInterfaceType INTEGER
|
|
}
|
|
|
|
rcIpv6PimInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The value of ifIndex for the interface on which IPv6 PIM is set"
|
|
::= { rcIpv6PimInterfaceEntry 1 }
|
|
|
|
rcIpv6PimInterfaceOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The current operational state of this PIM interface."
|
|
::= { rcIpv6PimInterfaceEntry 2 }
|
|
|
|
rcIpv6PimInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "PIM interface type."
|
|
DEFVAL { active }
|
|
::= { rcIpv6PimInterfaceEntry 3 }
|
|
|
|
|
|
rcIpv6PimStaticRPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6PimStaticRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table lists all the RPs configured statically for
|
|
various IPv6 multicast groups."
|
|
::= { rcIpv6PimObjects 4 }
|
|
|
|
rcIpv6PimStaticRPEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6PimStaticRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (conceptual row) in the rcIpv6PimStaticRPTable."
|
|
INDEX { rcIpv6PimStaticRPGroupAddress,
|
|
rcIpv6PimStaticRPGroupMask,
|
|
rcIpv6PimStaticRPAddress }
|
|
::= { rcIpv6PimStaticRPTable 1 }
|
|
|
|
RcIpv6PimStaticRPEntry ::= SEQUENCE {
|
|
rcIpv6PimStaticRPGroupAddress Ipv6Address,
|
|
rcIpv6PimStaticRPGroupMask Ipv6Address,
|
|
rcIpv6PimStaticRPAddress Ipv6Address,
|
|
rcIpv6PimStaticRPRowStatus RowStatus,
|
|
rcIpv6PimStaticRPStatus INTEGER
|
|
}
|
|
|
|
rcIpv6PimStaticRPGroupAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IPv6 multicast group address which, when combined with
|
|
rcIpv6PimStaticRPGroupMask, identifies a group prefix for
|
|
which rcIpv6PimStaticRPAddress is a static-RP."
|
|
::= { rcIpv6PimStaticRPEntry 1 }
|
|
|
|
rcIpv6PimStaticRPGroupMask OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The multicast group address mask which, when combined
|
|
with rcIpv6PimStaticRPGroupAddress, identifies a group
|
|
prefix for which rcIpv6PimStaticRPAddress is a static-RP."
|
|
::= { rcIpv6PimStaticRPEntry 2 }
|
|
|
|
rcIpv6PimStaticRPAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (unicast) address of the static-RP."
|
|
::= { rcIpv6PimStaticRPEntry 3 }
|
|
|
|
rcIpv6PimStaticRPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { rcIpv6PimStaticRPEntry 4 }
|
|
|
|
rcIpv6PimStaticRPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of StaticRP."
|
|
::= { rcIpv6PimStaticRPEntry 5 }
|
|
|
|
--rcIpv6PimCurrBsr OBJECT IDENTIFIER ::= { rcIpv6PimObjects 5 }
|
|
|
|
--rcIpv6PimCurrBsrAddress OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Current BSR address"
|
|
-- ::= { rcIpv6PimCurrBsr 1 }
|
|
|
|
--rcIpv6PimCurrBsrFragmentTag OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Current BSR Fragment Tag."
|
|
-- DEFVAL { -1 }
|
|
-- ::= { rcIpv6PimCurrBsr 2 }
|
|
|
|
--rcIpv6PimCurrBsrHashMask OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Current BSR Hash Mask value."
|
|
-- ::= { rcIpv6PimCurrBsr 3 }
|
|
|
|
--rcIpv6PimCurrBsrPriority OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Current BSR Priority."
|
|
-- DEFVAL { 0 }
|
|
-- ::= { rcIpv6PimCurrBsr 4 }
|
|
|
|
--rcIpv6PimCurrBsrBootStrapTimer OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION "Current BSR Boot Strap Timer."
|
|
-- ::= { rcIpv6PimCurrBsr 5 }
|
|
|
|
--rcIpv6PimVirtualNbrTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF RcIpv6PimVirtualNbrEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "Table listing the router's virtual PIM IPv6 neighbors"
|
|
-- ::= { rcIpv6PimObjects 6 }
|
|
|
|
--rcIpv6PimVirtualNbrEntry OBJECT-TYPE
|
|
-- SYNTAX RcIpv6PimVirtualNbrEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION "An entry in the virtual PIM IPv6 neighbors' table."
|
|
-- INDEX { rcIpv6PimVirtualNbrAddress }
|
|
-- ::= { rcIpv6PimVirtualNbrTable 1 }
|
|
|
|
--RcIpv6PimVirtualNbrEntry ::= SEQUENCE {
|
|
-- rcIpv6PimVirtualNbrAddress Ipv6Address,
|
|
-- rcIpv6PimVirtualNbrIfIndex InterfaceIndex,
|
|
-- rcIpv6PimVirtualNbrRowStatus RowStatus
|
|
--}
|
|
|
|
--rcIpv6PimVirtualNbrAddress OBJECT-TYPE
|
|
-- SYNTAX Ipv6Address
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The IPv6 address of the virtual PIM neighbor for which this entry
|
|
-- contains information."
|
|
-- ::= { rcIpv6PimVirtualNbrEntry 1 }
|
|
|
|
--rcIpv6PimVirtualNbrIfIndex OBJECT-TYPE
|
|
-- SYNTAX InterfaceIndex
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of ifIndex for the PIM interface in which this virtual
|
|
-- neighbor is created. This value is mandatory while trying to
|
|
-- create a virtual PIM neighbor."
|
|
-- ::= { rcIpv6PimVirtualNbrEntry 2 }
|
|
|
|
--rcIpv6PimVirtualNbrRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "To create/delete an entry in the virtual PIM neighbors'
|
|
-- table."
|
|
-- ::= { rcIpv6PimVirtualNbrEntry 3 }
|
|
|
|
|
|
rcIpv6PimActiveRPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIpv6PimActiveRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table lists the RPs being used for the active IP
|
|
multicast groups."
|
|
::= { rcIpv6PimObjects 7 }
|
|
|
|
rcIpv6PimActiveRPEntry OBJECT-TYPE
|
|
SYNTAX RcIpv6PimActiveRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the rcIpv6PimActiveRPTable."
|
|
INDEX { rcIpv6PimActiveRPGroupAddress }
|
|
::= { rcIpv6PimActiveRPTable 1 }
|
|
|
|
RcIpv6PimActiveRPEntry ::= SEQUENCE {
|
|
rcIpv6PimActiveRPGroupAddress Ipv6Address,
|
|
rcIpv6PimActiveRPAddress Ipv6Address,
|
|
rcIpv6PimActiveRPPriority Unsigned32
|
|
}
|
|
|
|
rcIpv6PimActiveRPGroupAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The active IPv6 multicast group address."
|
|
::= { rcIpv6PimActiveRPEntry 1 }
|
|
|
|
rcIpv6PimActiveRPAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address of the RP for the active multicast group."
|
|
::= { rcIpv6PimActiveRPEntry 2 }
|
|
|
|
rcIpv6PimActiveRPPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The priority of the RP."
|
|
::= { rcIpv6PimActiveRPEntry 3 }
|
|
|
|
|
|
rcMRouteIpv6Scalars OBJECT IDENTIFIER ::= { rcMRouteIpv6Statistics 2 }
|
|
|
|
rcMRouteIpv6StatsEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled status of IPv6 Multicast statistics."
|
|
DEFVAL { false }
|
|
::= { rcMRouteIpv6Scalars 1 }
|
|
|
|
rcMRouteIpv6StatsClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear ipv6 mroute stats."
|
|
DEFVAL { false }
|
|
::= { rcMRouteIpv6Scalars 2 }
|
|
|
|
rcMRouteIpv6StatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMRouteIpv6StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the table containing IPv6 Multicast statistics."
|
|
::= { rcMRouteIpv6Statistics 3 }
|
|
|
|
rcMRouteIpv6StatsEntry OBJECT-TYPE
|
|
SYNTAX RcMRouteIpv6StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing the ipv6 multicast statistics
|
|
information for the specific group ipv6 address."
|
|
INDEX { rcMRouteIpv6StatsGroupAddress }
|
|
::= { rcMRouteIpv6StatsTable 1 }
|
|
RcMRouteIpv6StatsEntry ::= SEQUENCE {
|
|
rcMRouteIpv6StatsGroupAddress Ipv6Address,
|
|
rcMRouteIpv6StatsSourceCount Counter32,
|
|
rcMRouteIpv6StatsPkts Counter64,
|
|
rcMRouteIpv6StatsBytes Counter64,
|
|
rcMRouteIpv6StatsAverageSizePerPkt Integer32
|
|
}
|
|
|
|
|
|
rcMRouteIpv6StatsGroupAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the IPv6 multicast group address for which this entry
|
|
contains ipv6 multicast statistics."
|
|
::= { rcMRouteIpv6StatsEntry 1 }
|
|
|
|
rcMRouteIpv6StatsSourceCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sources corresponding to the specific group and vrf."
|
|
::= { rcMRouteIpv6StatsEntry 2 }
|
|
|
|
rcMRouteIpv6StatsPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of frames that are processed
|
|
corresponding to the specific group and vrf."
|
|
::= { rcMRouteIpv6StatsEntry 3 }
|
|
rcMRouteIpv6StatsBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes that are processed
|
|
corresponding to the specific group and vrf."
|
|
::= { rcMRouteIpv6StatsEntry 4 }
|
|
|
|
rcMRouteIpv6StatsAverageSizePerPkt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average length of packets that are processed
|
|
corresponding to the specific group and vrf."
|
|
::= { rcMRouteIpv6StatsEntry 5 }
|
|
|
|
-- DVR
|
|
|
|
rcDvrGlobal OBJECT IDENTIFIER ::= {rcDvr 1}
|
|
|
|
rcDvrGlobalDomainId OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the DVR domain
|
|
that this node belongs to. Valid domain id for
|
|
controller or leaf is 1-255. Set domain id to
|
|
0 when DVR is not configured."
|
|
::= { rcDvrGlobal 1 }
|
|
|
|
rcDvrGlobalRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
controller(1), --Controller role
|
|
leaf(2) --Leaf role
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "It represents the role of this node in the DVR domain.
|
|
When DVR is created, role can be controller or leaf."
|
|
::= { rcDvrGlobal 2 }
|
|
|
|
rcDvrGlobalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configure DVR Controller or Leaf will set it to true.
|
|
Set to false if DVR is not configured."
|
|
DEFVAL { false }
|
|
::= { rcDvrGlobal 3 }
|
|
|
|
rcDvrVirtualIstLocalAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When DVR is created as Leaf node, virtual ist can be
|
|
configured on DVR Leaf. This is the local IP address
|
|
of virtual ist on DVR Leaf. Virtual ist can not be
|
|
configured on DVR Controller."
|
|
::= { rcDvrGlobal 4 }
|
|
|
|
rcDvrVirtualIstLocalMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When DVR is created as Leaf node, virtual ist can be
|
|
configured on DVR Leaf. This is the local subnet mask of
|
|
virtual ist on DVR Leaf. Virtual ist can not be configured
|
|
on DVR Controller."
|
|
::= { rcDvrGlobal 5 }
|
|
|
|
rcDvrVirtualIstPeerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When DVR is created as leaf node, virtual ist can be
|
|
configured on DVR Leaf. This is the peer Ip address
|
|
of virtual ist on DVR Leaf. Virtual ist can not be configured
|
|
on DVR Controller."
|
|
::= { rcDvrGlobal 6 }
|
|
|
|
rcDvrVirtualIstClusterId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When DVR is created as Leaf node, virtual ist can be
|
|
configured on DVR Leaf. This is the cluster Id of
|
|
virtual ist on DVR Leaf. Valid cluster id is 1-1000.
|
|
Set to 0 if no virtual ist is configured. Virtual ist
|
|
can not be configured on DVR Controller."
|
|
::= { rcDvrGlobal 7 }
|
|
|
|
rcDvrGlobalDomainIsid OBJECT-TYPE
|
|
SYNTAX Integer32(0..16775999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the DVR domain Isid
|
|
that this node belongs to. Valid domain I-sid is
|
|
16775745-16775999. Set to 0 when DVR is not created."
|
|
::= { rcDvrGlobal 8 }
|
|
|
|
rcDvrGlobalBackboneIsid OBJECT-TYPE
|
|
SYNTAX Integer32(0..16775744)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the DVR backbone Isid
|
|
that this node belongs to. Valid backbone I-sid is 16775744.
|
|
Set to 0 when DVR is not created."
|
|
::= { rcDvrGlobal 9 }
|
|
|
|
rcDvrGlobalGatewayMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DVR Gateway Mac address used by all DVR Domains."
|
|
::= { rcDvrGlobal 10 }
|
|
|
|
rcDvrGlobalInbandMgmtIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Inband management IPv4 address configured under ISIS and can
|
|
be used by both DVR and non DVR enabled nodes."
|
|
::= { rcDvrGlobal 11 }
|
|
|
|
rcDvrGlobalInjectDefaultRouteDisable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Controllers will by default send the default route(0.0.0.0/0.0.0.0)
|
|
to all the Leaf nodes. To turn the default behavior off, configure
|
|
inject-default-route-disable. This is for DVR Controller only."
|
|
DEFVAL { true }
|
|
::= { rcDvrGlobal 12 }
|
|
|
|
rcDvrGlobalOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "If the DVR object can be created(when ISIS and IPSC are enabled),
|
|
then DVR operational state is up, otherwise it is down."
|
|
::= { rcDvrGlobal 13 }
|
|
|
|
rcDvrGlobalSystemIdAsMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DVR System Id As Mac used by all DVR Domains."
|
|
::= { rcDvrGlobal 14 }
|
|
|
|
rcDvrGlobalHostEntriesClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "True to clear the host entry under GRT . Always returns false."
|
|
::= { rcDvrGlobal 15 }
|
|
|
|
rcDvrGlobalHostEntriesClearIpv4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to clear the dvr host entries for particular IP address"
|
|
::= {rcDvrGlobal 16 }
|
|
|
|
rcDvrGlobalHostEntriesClearL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to clear the dvr host entries for particular L2 ISID"
|
|
::= { rcDvrGlobal 17 }
|
|
|
|
rcDvrGlobalHostEntriesClearL3Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Used to clear the dvr host entries for particular L3 ISID"
|
|
::= { rcDvrGlobal 18 }
|
|
|
|
rcDvrVirtualIstIsid OBJECT-TYPE
|
|
SYNTAX Integer32(16774744..16775743 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "When DVR is created as Leaf node, virtual ist can be
|
|
configured on DVR Leaf. When virtual ist is configured,
|
|
isid for virtual ist is created based on cluset id.
|
|
Range for vist isid is 16774744..16775743 for max 1000
|
|
cluster ids. Set to 0 if no virtual ist is configured.
|
|
Virtual ist can not be configured on DVR Controller."
|
|
::= { rcDvrGlobal 19 }
|
|
|
|
rcDvrRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDvrRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of DVR routes that are in the CP DVR Table. This table
|
|
contains network routes only (all non /32 routes)."
|
|
::= { rcDvr 2 }
|
|
|
|
rcDvrRouteEntry OBJECT-TYPE
|
|
SYNTAX RcDvrRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcDvrRoute Table. An entry exists for
|
|
each network route in a DVR domain."
|
|
INDEX { rcDvrRouteDestIpAddrType,
|
|
rcDvrRouteDestIpAddr,
|
|
rcDvrRouteDestMask,
|
|
rcDvrRouteL3Isid,
|
|
rcDvrRouteEcmpIndex
|
|
}
|
|
::= { rcDvrRouteTable 1 }
|
|
|
|
RcDvrRouteEntry ::=
|
|
SEQUENCE {
|
|
rcDvrRouteDestIpAddrType InetAddressType,
|
|
rcDvrRouteDestIpAddr InetAddress,
|
|
rcDvrRouteDestMask InetAddressPrefixLength,
|
|
rcDvrRouteL3Isid Integer32,
|
|
rcDvrRouteEcmpIndex Integer32,
|
|
rcDvrRouteNextHopMac MacAddress,
|
|
rcDvrRouteL2Isid Integer32,
|
|
rcDvrRouteCost Integer32,
|
|
rcDvrRouteNextHopName OCTET STRING,
|
|
rcDvrRouteType INTEGER,
|
|
rcDvrRouteVrfId Integer32
|
|
}
|
|
|
|
rcDvrRouteDestIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Dest Ip address type of the DVR route table entry.
|
|
It can be either IPv4 or IPv6 for DVR feature."
|
|
::= { rcDvrRouteEntry 1 }
|
|
|
|
rcDvrRouteDestIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Dest Ip address of the DVR route table entry.
|
|
Support ipv4 size(4) and ipv6 size(16) depending on
|
|
rcDvrRouteDestIpAddrType."
|
|
::= { rcDvrRouteEntry 2 }
|
|
|
|
rcDvrRouteDestMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Dest mask of the DVR route table entry."
|
|
::= { rcDvrRouteEntry 3 }
|
|
|
|
rcDvrRouteL3Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "L3 I-sid of the DVR route table entry."
|
|
::= { rcDvrRouteEntry 4 }
|
|
|
|
rcDvrRouteEcmpIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ecmp Index for the Ecmp routes of the DVR route table entry."
|
|
::= { rcDvrRouteEntry 5 }
|
|
|
|
rcDvrRouteNextHopMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop BEB of the DVR route table entry."
|
|
::= { rcDvrRouteEntry 6 }
|
|
|
|
rcDvrRouteL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2 I-sid of the DVR route table entry."
|
|
::= { rcDvrRouteEntry 7 }
|
|
|
|
rcDvrRouteCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Cost of the DVR route table entry."
|
|
::= { rcDvrRouteEntry 8 }
|
|
|
|
rcDvrRouteNextHopName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Nexthop BEB's hostname of the DVR route table entry."
|
|
::= { rcDvrRouteEntry 9 }
|
|
|
|
rcDvrRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
ecmp(2),
|
|
redist(3),
|
|
ecmpAndRedist(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Route type of the DVR route table entry."
|
|
::= { rcDvrRouteEntry 10 }
|
|
|
|
rcDvrRouteVrfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VRF Id of the DVR route table entry."
|
|
::= { rcDvrRouteEntry 11 }
|
|
|
|
rcDvrMembersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDvrMembersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of DVR members in a DVR domain. It contains
|
|
all Controllers and Leaf nodes."
|
|
::= { rcDvr 3 }
|
|
|
|
rcDvrMembersEntry OBJECT-TYPE
|
|
SYNTAX RcDvrMembersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcDvrMembers Table. It contains
|
|
all Controller and Leaf nodes."
|
|
INDEX { rcDvrMemberMacAddress }
|
|
::= { rcDvrMembersTable 1 }
|
|
|
|
RcDvrMembersEntry ::=
|
|
SEQUENCE {
|
|
rcDvrMemberMacAddress MacAddress,
|
|
rcDvrMemberSysId OCTET STRING,
|
|
rcDvrMemberNickName OCTET STRING,
|
|
rcDvrMemberRole INTEGER,
|
|
rcDvrMemberDomainId Integer32
|
|
}
|
|
|
|
rcDvrMemberMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mac address of the DVR members table entry."
|
|
::= { rcDvrMembersEntry 1 }
|
|
|
|
rcDvrMemberSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sys-id of the DVR members table entry."
|
|
::= { rcDvrMembersEntry 2 }
|
|
|
|
rcDvrMemberNickName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Nick-name of the DVR members table entry."
|
|
::= { rcDvrMembersEntry 3 }
|
|
|
|
rcDvrMemberRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
controller(1),
|
|
leaf(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DVR role of the DVR members table entry."
|
|
::= { rcDvrMembersEntry 4 }
|
|
|
|
rcDvrMemberDomainId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DVR domain id of the DVR members table entry."
|
|
::= { rcDvrMembersEntry 5 }
|
|
|
|
rcDvrInterfacesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDvrInterfacesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of DVR Interfaces in a DVR domain. DVR
|
|
interfaces are created when IP is configured on the DVR
|
|
enabled L2VSN(vlan, i-sid)."
|
|
::= { rcDvr 4 }
|
|
|
|
rcDvrInterfacesEntry OBJECT-TYPE
|
|
SYNTAX RcDvrInterfacesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcDvrInterfaces Table. An entry exists
|
|
for each interface."
|
|
INDEX {
|
|
rcDvrInterfaceVlanIpAddrType,
|
|
rcDvrInterfaceVlanIpAddr,
|
|
rcDvrInterfaceL3Isid,
|
|
rcDvrInterfaceL2Isid }
|
|
::= { rcDvrInterfacesTable 1 }
|
|
|
|
RcDvrInterfacesEntry ::=
|
|
SEQUENCE {
|
|
rcDvrInterfaceVlanIpAddrType InetAddressType,
|
|
rcDvrInterfaceVlanIpAddr InetAddress,
|
|
rcDvrInterfaceL3Isid Integer32,
|
|
rcDvrInterfaceL2Isid Integer32,
|
|
rcDvrInterfaceVlanIpMask InetAddressPrefixLength,
|
|
rcDvrInterfaceVrfId Integer32,
|
|
rcDvrInterfaceVlanId Integer32,
|
|
rcDvrInterfaceGwIpAddrType InetAddressType,
|
|
rcDvrInterfaceGwIpAddr InetAddress,
|
|
rcDvrInterfaceAdminState TruthValue,
|
|
rcDvrInterfaceSpbmcState INTEGER,
|
|
rcDvrInterfaceIgmpVersion INTEGER
|
|
}
|
|
|
|
rcDvrInterfaceVlanIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Vlan Ip address type of the DVR interfaces table entry.
|
|
It can be either IPv4 or IPv6 for DVR feature."
|
|
::= {rcDvrInterfacesEntry 1 }
|
|
|
|
rcDvrInterfaceVlanIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Dest Ip address of the DVR interfaces table entry.
|
|
Support ipv4 size(4) and ipv6 size(16) depending on
|
|
rcDvrInterfaceVlanIpAddrType."
|
|
::= {rcDvrInterfacesEntry 2 }
|
|
|
|
rcDvrInterfaceL3Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "L3 I-sid of the DVR interfaces table entry."
|
|
::= { rcDvrInterfacesEntry 3 }
|
|
|
|
rcDvrInterfaceL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "L2 I-sid of the DVR interfaces table entry."
|
|
::= { rcDvrInterfacesEntry 4 }
|
|
|
|
rcDvrInterfaceVlanIpMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan Ip address mask of the DVR interfaces table entry."
|
|
::= { rcDvrInterfacesEntry 5 }
|
|
|
|
rcDvrInterfaceVrfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VRF Id of the DVR interfaces table entry."
|
|
::= { rcDvrInterfacesEntry 6 }
|
|
|
|
rcDvrInterfaceVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan Id of the DVR interfaces table entry."
|
|
::= { rcDvrInterfacesEntry 7 }
|
|
|
|
rcDvrInterfaceGwIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address type of the DVR Gateway IP address.
|
|
It can be either IPv4 or IPv6 for DVR feature."
|
|
::= { rcDvrInterfacesEntry 8 }
|
|
|
|
rcDvrInterfaceGwIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DVR Gateway IP address of the DVR interfaces table entry.
|
|
Support ipv4 size(4) and ipv6 size(16) depending on
|
|
rcDvrInterfaceGwIpAddrType."
|
|
::= { rcDvrInterfacesEntry 9 }
|
|
|
|
rcDvrInterfaceAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Admin state of the DVR interfaces table entry."
|
|
::= { rcDvrInterfacesEntry 10 }
|
|
|
|
rcDvrInterfaceSpbmcState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2),
|
|
notApplicable(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "SPBMC state of the DVR interfaces table entry."
|
|
::= { rcDvrInterfacesEntry 11 }
|
|
|
|
rcDvrInterfaceIgmpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v1(1),
|
|
v2(2),
|
|
v3(3),
|
|
notApplicable(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version of IGMP which is running on this DVR interface."
|
|
::= { rcDvrInterfacesEntry 12 }
|
|
|
|
rcDvrHostEntriesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDvrHostEntriesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of DVR host entries in a DVR domain."
|
|
::= { rcDvr 5 }
|
|
|
|
rcDvrHostEntriesEntry OBJECT-TYPE
|
|
SYNTAX RcDvrHostEntriesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcDvrHostEntries Table. A entry exists for
|
|
each /32 host route in DVR domain."
|
|
INDEX { rcDvrHostEntriesIpAddrType,
|
|
rcDvrHostEntriesIpAddr,
|
|
rcDvrHostEntriesMask,
|
|
rcDvrHostEntriesL3Isid
|
|
}
|
|
::= { rcDvrHostEntriesTable 1 }
|
|
|
|
RcDvrHostEntriesEntry ::=
|
|
SEQUENCE {
|
|
rcDvrHostEntriesIpAddrType InetAddressType,
|
|
rcDvrHostEntriesIpAddr InetAddress,
|
|
rcDvrHostEntriesMask InetAddressPrefixLength,
|
|
rcDvrHostEntriesL3Isid Integer32,
|
|
rcDvrHostEntriesMacAddr MacAddress,
|
|
rcDvrHostEntriesL2Isid Integer32,
|
|
rcDvrHostEntriesPort OCTET STRING,
|
|
rcDvrHostEntriesDomainId Integer32,
|
|
rcDvrHostEntriesType INTEGER,
|
|
rcDvrHostEntriesNextHopName OCTET STRING,
|
|
rcDvrHostEntriesNextHopMac MacAddress,
|
|
rcDvrHostEntriesClear TruthValue,
|
|
rcDvrHostEntriesVrfId Integer32
|
|
}
|
|
|
|
rcDvrHostEntriesIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address type of the DVR host-entries table entry.
|
|
It can be either IPv4 or IPv6 for DVR feature."
|
|
::= { rcDvrHostEntriesEntry 1 }
|
|
|
|
rcDvrHostEntriesIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address of the DVR host-entries table entry.
|
|
Support ipv4 size(4) and ipv6 size(16) depending on
|
|
rcDvrHostEntriesIpAddrType."
|
|
::= { rcDvrHostEntriesEntry 2 }
|
|
|
|
rcDvrHostEntriesMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mask of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 3 }
|
|
|
|
rcDvrHostEntriesL3Isid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "L3 I-sid of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 4 }
|
|
|
|
rcDvrHostEntriesMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac address of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 5 }
|
|
|
|
rcDvrHostEntriesL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2 I-sid of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 6 }
|
|
|
|
rcDvrHostEntriesPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Port of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 7 }
|
|
|
|
rcDvrHostEntriesDomainId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Domain Id of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 8 }
|
|
|
|
rcDvrHostEntriesType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
dynamic(2),
|
|
subnet(3),
|
|
ecmp(4),
|
|
bb-loc(5),
|
|
bb-non-loc(6),
|
|
default(7),
|
|
redist(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host entry type of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 9}
|
|
|
|
rcDvrHostEntriesNextHopName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 10 }
|
|
|
|
rcDvrHostEntriesNextHopMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop as mac of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 11 }
|
|
|
|
rcDvrHostEntriesClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "True to clear the entry. Always returns false."
|
|
::= { rcDvrHostEntriesEntry 12 }
|
|
|
|
rcDvrHostEntriesVrfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VRF Id of the DVR host-entries table entry."
|
|
::= { rcDvrHostEntriesEntry 13 }
|
|
|
|
rcDvrL3vsnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDvrL3vsnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of DVR L3VSN in a DVR domain. On DVR Controller, it has
|
|
all configured vrfIds/vrf names. On DVR Leaf, it only has
|
|
internal created vrfIds/vrf names."
|
|
::= { rcDvr 6 }
|
|
|
|
rcDvrL3vsnEntry OBJECT-TYPE
|
|
SYNTAX RcDvrL3vsnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcDvrL3vsn Table. An entry exists for each
|
|
vrfId."
|
|
INDEX { rcDvrL3vsnVrfId }
|
|
::= { rcDvrL3vsnTable 1 }
|
|
|
|
RcDvrL3vsnEntry ::=
|
|
SEQUENCE {
|
|
rcDvrL3vsnVrfId Integer32,
|
|
rcDvrL3vsnIsid Integer32,
|
|
rcDvrL3vsnVrfName DisplayString,
|
|
rcDvrL3vsnInjectDefaultRouteDisable TruthValue
|
|
}
|
|
|
|
rcDvrL3vsnVrfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "L3VSN VrfId of the DVR L3VSN table entry."
|
|
::= {rcDvrL3vsnEntry 1 }
|
|
|
|
rcDvrL3vsnIsid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L3VSN I-sid of the DVR L3VSN table entry."
|
|
::= {rcDvrL3vsnEntry 2 }
|
|
|
|
rcDvrL3vsnVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L3VSN vrf name of the DVR L3VSN table entry."
|
|
::= {rcDvrL3vsnEntry 3 }
|
|
|
|
rcDvrL3vsnInjectDefaultRouteDisable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "l3VSN inject-default-route-disable of the DVR L3VSN table entry.
|
|
This is used when the user wants to disable the default feature
|
|
of injecting the default route (0.0.0.0/0.0.0.0) into the
|
|
DVR domain for a specific L3VSN.
|
|
Default is injecting default route into the DVR domain."
|
|
DEFVAL { false }
|
|
::= { rcDvrL3vsnEntry 4 }
|
|
|
|
rcDvrDatabaseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDvrDatabaseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of DVR database that are in the CP DVR Table. This table
|
|
contains all network and host routes"
|
|
::= { rcDvr 7 }
|
|
|
|
rcDvrDatabaseEntry OBJECT-TYPE
|
|
SYNTAX RcDvrDatabaseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcDvrDatabase Table. An entry exists for
|
|
each network or host route in a DVR domain."
|
|
INDEX { rcDvrDatabaseDestIpAddrType,
|
|
rcDvrDatabaseDestIpAddr,
|
|
rcDvrDatabaseDestMask,
|
|
rcDvrDatabaseL3Isid,
|
|
rcDvrDatabaseEcmpIndex
|
|
}
|
|
::= { rcDvrDatabaseTable 1 }
|
|
|
|
RcDvrDatabaseEntry ::=
|
|
SEQUENCE {
|
|
rcDvrDatabaseDestIpAddrType InetAddressType,
|
|
rcDvrDatabaseDestIpAddr InetAddress,
|
|
rcDvrDatabaseDestMask InetAddressPrefixLength,
|
|
rcDvrDatabaseL3Isid Integer32,
|
|
rcDvrDatabaseEcmpIndex Integer32,
|
|
rcDvrDatabaseNextHop MacAddress,
|
|
rcDvrDatabaseL2Isid Integer32,
|
|
rcDvrDatabaseOutgoingInterface OCTET STRING,
|
|
rcDvrDatabaseSpbCost Integer32,
|
|
rcDvrDatabasePrefixCost Integer32,
|
|
rcDvrDatabaseNextHopName OCTET STRING,
|
|
rcDvrDatabaseAge TimeTicks,
|
|
rcDvrDatabaseVrfId Integer32
|
|
}
|
|
|
|
rcDvrDatabaseDestIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Dest Ip address type of the DVR database table entry.
|
|
It can be either IPv4 or IPv6 for DVR feature."
|
|
::= { rcDvrDatabaseEntry 1 }
|
|
|
|
rcDvrDatabaseDestIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Dest Ip address of the DVR database table entry.
|
|
Support ipv4 size(4) and ipv6 size(16) depending on
|
|
rcDvrDatabaseDestIpAddrType."
|
|
::= { rcDvrDatabaseEntry 2 }
|
|
|
|
rcDvrDatabaseDestMask OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Dest mask of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 3 }
|
|
|
|
rcDvrDatabaseL3Isid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "L3 I-sid of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 4 }
|
|
|
|
rcDvrDatabaseEcmpIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ecmp Index for the Ecmp routes of the DVR databasse table entry."
|
|
::= { rcDvrDatabaseEntry 5 }
|
|
|
|
rcDvrDatabaseNextHop OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop BEB of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 6 }
|
|
|
|
rcDvrDatabaseL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2 I-sid of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 7 }
|
|
|
|
rcDvrDatabaseOutgoingInterface OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Outgoing interface (ports or mlt) of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 8 }
|
|
|
|
rcDvrDatabaseSpbCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Spb cost of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 9 }
|
|
|
|
rcDvrDatabasePrefixCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Prefix cost of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 10 }
|
|
|
|
rcDvrDatabaseNextHopName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Nexthop BEB's hostname of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 11 }
|
|
|
|
rcDvrDatabaseAge OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Age(uptime since created) of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 12 }
|
|
|
|
rcDvrDatabaseVrfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "VRF Id of the DVR database table entry."
|
|
::= { rcDvrDatabaseEntry 13 }
|
|
|
|
|
|
|
|
rcDvrBackboneEntriesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDvrBackboneEntriesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of DVR backbone entries in a DVR domain.
|
|
Used for inter DVR route redistribution."
|
|
::= { rcDvr 8 }
|
|
|
|
rcDvrBackboneEntriesEntry OBJECT-TYPE
|
|
SYNTAX RcDvrBackboneEntriesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcDvrBackboneEntriesTable."
|
|
INDEX { rcDvrBackboneEntriesIpAddrType,
|
|
rcDvrBackboneEntriesIpAddr,
|
|
rcDvrBackboneEntriesL3Isid,
|
|
rcDvrBackboneEntriesDomainId,
|
|
rcDvrBackboneEntriesEcmpIndex
|
|
}
|
|
::= { rcDvrBackboneEntriesTable 1 }
|
|
|
|
RcDvrBackboneEntriesEntry ::=
|
|
SEQUENCE {
|
|
rcDvrBackboneEntriesIpAddrType InetAddressType,
|
|
rcDvrBackboneEntriesIpAddr InetAddress,
|
|
rcDvrBackboneEntriesL3Isid Integer32,
|
|
rcDvrBackboneEntriesDomainId Integer32,
|
|
rcDvrBackboneEntriesEcmpIndex Integer32,
|
|
rcDvrBackboneEntriesHostMacAddr MacAddress,
|
|
rcDvrBackboneEntriesL2Isid Integer32,
|
|
rcDvrBackboneEntriesAdvControllerName OCTET STRING,
|
|
rcDvrBackboneEntriesAdvController MacAddress,
|
|
rcDvrBackboneEntriesNextHopName OCTET STRING,
|
|
rcDvrBackboneEntriesNextHopMac MacAddress
|
|
}
|
|
|
|
rcDvrBackboneEntriesIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address type of the DVR backbone-entries table entry.
|
|
It can be either IPv4 or IPv6 for DVR feature."
|
|
::= { rcDvrBackboneEntriesEntry 1 }
|
|
|
|
rcDvrBackboneEntriesIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address of the DVR backbone-entries table entry.
|
|
Support ipv4 size(4) and ipv6 size(16) depending on
|
|
rcDvrBackboneEntriesIpAddrType."
|
|
::= { rcDvrBackboneEntriesEntry 2 }
|
|
|
|
rcDvrBackboneEntriesL3Isid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "L3 I-sid of the DVR backbone-entries table entry."
|
|
::= { rcDvrBackboneEntriesEntry 3 }
|
|
|
|
rcDvrBackboneEntriesDomainId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Domain id of the DVR backbone-entries table entry."
|
|
::= { rcDvrBackboneEntriesEntry 4 }
|
|
|
|
rcDvrBackboneEntriesEcmpIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ecmp Index for the Ecmp routes of the DVR
|
|
backbone-entries table entry."
|
|
::= { rcDvrBackboneEntriesEntry 5 }
|
|
|
|
rcDvrBackboneEntriesHostMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Host mac address of the DVR backbone-entries table entry."
|
|
::= { rcDvrBackboneEntriesEntry 6 }
|
|
|
|
rcDvrBackboneEntriesL2Isid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "L2 I-sid of the DVR backbone-entries table entry."
|
|
::= { rcDvrBackboneEntriesEntry 7 }
|
|
|
|
rcDvrBackboneEntriesAdvControllerName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Advertising controller of the DVR backbone-entries table entry."
|
|
::= { rcDvrBackboneEntriesEntry 8 }
|
|
|
|
rcDvrBackboneEntriesAdvController OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Advertising controller as mac of the DVR backbone-entries
|
|
table entry."
|
|
::= { rcDvrBackboneEntriesEntry 9 }
|
|
|
|
rcDvrBackboneEntriesNextHopName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop of the DVR backbone-entries table entry."
|
|
::= { rcDvrBackboneEntriesEntry 10 }
|
|
|
|
rcDvrBackboneEntriesNextHopMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Next hop as mac of the DVR backbone-entries table entry."
|
|
::= { rcDvrBackboneEntriesEntry 11 }
|
|
|
|
rcDvrBackboneMembersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDvrBackboneMembersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of DVR backbone members in a DVR domain. It contains
|
|
all Controllers and NON DVR BEBs."
|
|
::= { rcDvr 9 }
|
|
|
|
rcDvrBackboneMembersEntry OBJECT-TYPE
|
|
SYNTAX RcDvrBackboneMembersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry of rcDvrBackboneMembersTable. It contains
|
|
all Controllers and NON DVR BEBs."
|
|
INDEX { rcDvrBackboneMemberMacAddress }
|
|
::= { rcDvrBackboneMembersTable 1 }
|
|
|
|
RcDvrBackboneMembersEntry ::=
|
|
SEQUENCE {
|
|
rcDvrBackboneMemberMacAddress MacAddress,
|
|
rcDvrBackboneMemberSysId OCTET STRING,
|
|
rcDvrBackboneMemberNickName OCTET STRING,
|
|
rcDvrBackboneMemberRole INTEGER,
|
|
rcDvrBackboneMemberDomainId Integer32
|
|
}
|
|
|
|
rcDvrBackboneMemberMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Mac address of the DVR backbone members table entry."
|
|
::= { rcDvrBackboneMembersEntry 1 }
|
|
|
|
rcDvrBackboneMemberSysId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Sys-id of the DVR backbone members table entry."
|
|
::= { rcDvrBackboneMembersEntry 2 }
|
|
|
|
rcDvrBackboneMemberNickName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (7))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Nick-name of the DVR backbone members table entry."
|
|
::= { rcDvrBackboneMembersEntry 3 }
|
|
|
|
rcDvrBackboneMemberRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
controller(1),
|
|
non-dvr-beb(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DVR role of the DVR backbone members table entry."
|
|
::= { rcDvrBackboneMembersEntry 4 }
|
|
|
|
rcDvrBackboneMemberDomainId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DVR domain id of the DVR backbone members table entry."
|
|
::= { rcDvrBackboneMembersEntry 5 }
|
|
|
|
|
|
|
|
|
|
-- digitalCert Mib
|
|
|
|
rcDigitalCertMib OBJECT IDENTIFIER ::= { rcDigitalCert 1 }
|
|
rcDigitalCertNotifications OBJECT IDENTIFIER ::= { rcDigitalCertMib 0 }
|
|
rcDigitalCertObjects OBJECT IDENTIFIER ::= { rcDigitalCertMib 1 }
|
|
rcDigitalCertScalars OBJECT IDENTIFIER ::= { rcDigitalCertObjects 1 }
|
|
|
|
--Subject Scalar objects
|
|
|
|
rcDigitalCertSubjectCommonName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Common Name field of the subject sending the
|
|
Certificate Signing Request to the Certificate Authority"
|
|
::= {rcDigitalCertScalars 1 }
|
|
|
|
rcDigitalCertSubjectEmailAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..254))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Email Address of the subject sending the Certificate Signing Request to the Certificate Authority"
|
|
::= { rcDigitalCertScalars 2 }
|
|
|
|
rcDigitalCertSubjectOrganizationalUnit OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Organizational Unit field of the subject sending the
|
|
Certificate Signing Request to the Certificate Authority"
|
|
::= { rcDigitalCertScalars 3 }
|
|
|
|
rcDigitalCertSubjectOrganization OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Organization of the subject sending the Certificate
|
|
Signing Request to the Certificate Authority"
|
|
::= { rcDigitalCertScalars 4 }
|
|
|
|
rcDigitalCertSubjectLocality OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the Locality of the subject sending the
|
|
Certificate Signing Request to the Certificate Authority"
|
|
::= { rcDigitalCertScalars 5 }
|
|
|
|
rcDigitalCertSubjectProvince OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Province name of the subject sending the Certificate
|
|
Signing Request to the Certificate Authority"
|
|
::= { rcDigitalCertScalars 6 }
|
|
|
|
rcDigitalCertSubjectCountry OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of the country of the subject sending the
|
|
Certificate Signing Request to the Certificate Authority"
|
|
::= { rcDigitalCertScalars 7 }
|
|
|
|
rcDigitalCertInstallFile OBJECT-TYPE
|
|
SYNTAX INTEGER { offlineCACert (1),
|
|
offlineRootCACert (2),
|
|
offlineSubjectCert (3),
|
|
offlineCRLFile (4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This installs the CA/Root CA/subject certificate/CRL file obtained
|
|
offline from the Certificate Authority"
|
|
::= { rcDigitalCertScalars 8 }
|
|
|
|
rcDigitalCertInstallFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This contains the certificate file name obtained
|
|
offline from the Certificate Authority"
|
|
::= { rcDigitalCertScalars 9 }
|
|
|
|
rcDigitalCertUninstallFile OBJECT-TYPE
|
|
SYNTAX INTEGER { offlineCACert (1),
|
|
offlineRootCACert (2),
|
|
offlineSubjectCert (3),
|
|
offlineCRLFile (4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This uninstalls the CA/Root CA/subject certificate/CRL file obtained
|
|
offline from the Certificate Authority"
|
|
::= { rcDigitalCertScalars 10 }
|
|
|
|
rcDigitalCertUninstallFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This contains the certificate file name obtained
|
|
offline from the Certificate Authority"
|
|
::= { rcDigitalCertScalars 11 }
|
|
|
|
rcDigitalCertGenerateCsr OBJECT-TYPE
|
|
SYNTAX INTEGER { generate (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Generates the Certificate Signing Request required to
|
|
obtain the Offline Subject Certificate"
|
|
::= { rcDigitalCertScalars 12 }
|
|
|
|
|
|
------ key table
|
|
|
|
|
|
rcDigitalCertKeyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDigitalCertKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table containing all the information related to the key-pair, required
|
|
to get the Digital Certificate from the Certificate Authority."
|
|
::= { rcDigitalCertObjects 2 }
|
|
|
|
|
|
rcDigitalCertKeyEntry OBJECT-TYPE
|
|
SYNTAX RcDigitalCertKeyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "the entry specifies the key-pair
|
|
name, size and the algorithm used for the generation of key-pair."
|
|
INDEX { rcDigitalCertKeyType, rcDigitalCertKeySize}
|
|
::= { rcDigitalCertKeyTable 1 }
|
|
|
|
RcDigitalCertKeyEntry ::= SEQUENCE {
|
|
rcDigitalCertKeyType INTEGER,
|
|
rcDigitalCertKeySize Integer32,
|
|
rcDigitalCertKeyName DisplayString,
|
|
rcDigitalCertKeyRowStatus RowStatus
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
rcDigitalCertKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {rsa (1)}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "defines the algorithm used to generate the key-pair"
|
|
::= { rcDigitalCertKeyEntry 1 }
|
|
|
|
rcDigitalCertKeySize OBJECT-TYPE
|
|
SYNTAX Integer32 ( 2048 )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "defines the size of the key-pair to be generated "
|
|
|
|
::= { rcDigitalCertKeyEntry 2 }
|
|
|
|
|
|
rcDigitalCertKeyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..46))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "refers to the name of the key-pair generated for the subject.
|
|
It is an auto generated entity,
|
|
generated as the combination of key-type and key-size"
|
|
::= { rcDigitalCertKeyEntry 3 }
|
|
|
|
|
|
rcDigitalCertKeyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "used to create/delete entries"
|
|
::= { rcDigitalCertKeyEntry 4 }
|
|
|
|
|
|
|
|
|
|
------- ca table
|
|
|
|
|
|
rcDigitalCertCaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDigitalCertCaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table containing all the information related to the Certificate Authority issuing the Digital Certificate"
|
|
::= { rcDigitalCertObjects 3 }
|
|
|
|
rcDigitalCertCaEntry OBJECT-TYPE
|
|
SYNTAX RcDigitalCertCaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "entry containing
|
|
information about the Certificate Authority"
|
|
INDEX { rcDigitalCertCaName }
|
|
::= { rcDigitalCertCaTable 1 }
|
|
|
|
RcDigitalCertCaEntry ::= SEQUENCE {
|
|
rcDigitalCertCaName DisplayString,
|
|
rcDigitalCertCaCommonName DisplayString,
|
|
rcDigitalCertCaKeyName DisplayString,
|
|
rcDigitalCertCaCaUrl RcLongDisplayString,
|
|
rcDigitalCertCaAction INTEGER,
|
|
rcDigitalCertCaActionChallengePassword DisplayString,
|
|
rcDigitalCertCaLastActionStatus INTEGER,
|
|
rcDigitalCertCaLastActionFailureReason DisplayString,
|
|
rcDigitalCertCaInstallRootCaFileName DisplayString,
|
|
rcDigitalCertCaSubjectCertificateValidityDays Integer32,
|
|
rcDigitalCertCaUsePost TruthValue,
|
|
rcDigitalCertCaRowStatus RowStatus
|
|
}
|
|
|
|
|
|
rcDigitalCertCaName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..45))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "user defined name referring to the Certificate Authority issuing the Digital Certificate"
|
|
::= { rcDigitalCertCaEntry 1 }
|
|
|
|
rcDigitalCertCaCommonName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "defines the Common Name of the Certificate Authority issuing the Digital Certificate"
|
|
::= { rcDigitalCertCaEntry 2 }
|
|
|
|
rcDigitalCertCaKeyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..45))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "defines the name of the associated key pair . It refers to the Key Name entry of the rcDigitalCertKeyTable"
|
|
::= { rcDigitalCertCaEntry 3 }
|
|
|
|
rcDigitalCertCaCaUrl OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "defines the URL of the Certificate Authority issuing the Digital Certificate"
|
|
::= { rcDigitalCertCaEntry 4 }
|
|
|
|
|
|
rcDigitalCertCaAction OBJECT-TYPE
|
|
SYNTAX INTEGER { noop (1),
|
|
caauth (2),
|
|
enroll (3),
|
|
renew (4),
|
|
remove (5),
|
|
install (6),
|
|
getCrl (7)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "specifies the various actions Certificate Authority can take-
|
|
'noop' - No operation
|
|
'caauth' - Certificate Authority (CA) authentication.
|
|
'enroll' - Certificate Enrolment Request.
|
|
'renew' - Certificate Renew Request.
|
|
'remove' - Removes the subject certificate obtained online from the Certificate Authority.
|
|
'install' - Installs the subject certificate obtained online from the Cerificate Authority.
|
|
'getCrl' - Get the Certificate Revocation List from the CDP."
|
|
::= { rcDigitalCertCaEntry 5 }
|
|
|
|
|
|
rcDigitalCertCaActionChallengePassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "specifies the challenge password required to perform the scep operation"
|
|
::= { rcDigitalCertCaEntry 6 }
|
|
|
|
rcDigitalCertCaLastActionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { none (1),
|
|
success (2),
|
|
failed (3),
|
|
inProgress (4)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the status of the last action
|
|
'none' - No action was performed yet.
|
|
'success' - Execution of the action triggered is
|
|
completed successfully.
|
|
'failed' - Execution of the action triggered has
|
|
failed.
|
|
'inProgress' - Execution of the action triggered is
|
|
in progress. "
|
|
::= { rcDigitalCertCaEntry 7 }
|
|
|
|
rcDigitalCertCaLastActionFailureReason OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..81))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "defines the reason of failure for the last action performed by the Certificate Authority"
|
|
::= { rcDigitalCertCaEntry 8 }
|
|
|
|
rcDigitalCertCaInstallRootCaFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "installs the Root Certificate Authority's certificate
|
|
obtained offline "
|
|
::={ rcDigitalCertCaEntry 9 }
|
|
|
|
rcDigitalCertCaSubjectCertificateValidityDays OBJECT-TYPE
|
|
SYNTAX Integer32 (7..1185)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "number of days for which subject certificate will remain
|
|
valid"
|
|
DEFVAL { 365 }
|
|
::= { rcDigitalCertCaEntry 10 }
|
|
|
|
|
|
rcDigitalCertCaUsePost OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "specifies the HTTP request type : URL or POST , TRUE for EJBCA and FALSE for Win2012 CA"
|
|
DEFVAL { true }
|
|
::= { rcDigitalCertCaEntry 11 }
|
|
|
|
rcDigitalCertCaRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "used to create/delete entries"
|
|
::= { rcDigitalCertCaEntry 12 }
|
|
|
|
|
|
|
|
|
|
|
|
-- certificate table
|
|
|
|
rcDigitalCertTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDigitalCertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table of information about digital certificate"
|
|
::= { rcDigitalCertObjects 4 }
|
|
|
|
rcDigitalCertEntry OBJECT-TYPE
|
|
SYNTAX RcDigitalCertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "entry containing
|
|
information about digital certificates"
|
|
INDEX { rcDigitalCertType }
|
|
::= { rcDigitalCertTable 1 }
|
|
|
|
RcDigitalCertEntry ::= SEQUENCE {
|
|
rcDigitalCertType INTEGER,
|
|
rcDigitalCertVersionNumber DisplayString,
|
|
rcDigitalCertSerialNumber DisplayString,
|
|
rcDigitalCertIssuerName RcLongDisplayString,
|
|
rcDigitalCertValidStartPeriod DateAndTime,
|
|
rcDigitalCertValidEndPeriod DateAndTime,
|
|
rcDigitalCertCertificateSignatureAlgorithm INTEGER,
|
|
rcDigitalCertCertificateSignature RcLongDisplayString,
|
|
rcDigitalCertSubject RcLongDisplayString,
|
|
rcDigitalCertSubjectPublicKeyAlgorithm INTEGER,
|
|
rcDigitalCertSubjectPublicKey RcLongDisplayString,
|
|
rcDigitalCertHasBasicConstraint TruthValue,
|
|
rcDigitalCertHasKeyUsage TruthValue,
|
|
rcDigitalCertIsCa TruthValue,
|
|
rcDigitalCertKeyUsage BITS,
|
|
rcDigitalCertStatus DisplayString,
|
|
rcDigitalCertInstalled TruthValue,
|
|
rcDigitalCertCdpUrl RcLongDisplayString,
|
|
rcDigitalCertOcspUrl RcLongDisplayString,
|
|
rcDigitalCertExtendedKeyUsage DisplayString
|
|
}
|
|
|
|
rcDigitalCertType OBJECT-TYPE
|
|
SYNTAX INTEGER { onlineCaCert (1),
|
|
onlineSubjectCert (2),
|
|
offlineCaCert (3),
|
|
offlineSubjectCert (4) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "uniquely identifies the certificate
|
|
'onlineCaCert' - Certificate Authority's Certificate obtained Online from Certificate Authority
|
|
'onlineSubjectCert' - Subject Certificate obtained Online from Certificate Authority
|
|
'offlineCaCert' - Certificate Authority's Certificate obtained Offline from Certificate Authority
|
|
'offlineSubjectCert' - Subject Certificate obtained Offline from Certificate Authority"
|
|
::= { rcDigitalCertEntry 1 }
|
|
|
|
rcDigitalCertVersionNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the version number of the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertEntry 2 }
|
|
|
|
rcDigitalCertSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the serial number of the certificate for the subject as issued by the Certificate Authority "
|
|
::= {rcDigitalCertEntry 3 }
|
|
|
|
rcDigitalCertIssuerName OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the issuer's name of the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertEntry 4 }
|
|
|
|
|
|
rcDigitalCertValidStartPeriod OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the start date of the validation period of the certificate for the subject as issued by the Certificate Authority "
|
|
::= { rcDigitalCertEntry 5 }
|
|
|
|
|
|
rcDigitalCertValidEndPeriod OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the last date of the validation period of the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertEntry 6 }
|
|
|
|
rcDigitalCertCertificateSignatureAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER { rsaEncryption (1),
|
|
md2withRSAEncryption (2),
|
|
md4withRSAEncryption (3),
|
|
md5withRSAEncryption (4),
|
|
sha1withRSAEncryption (5),
|
|
sha256withRSAEncryption (11),
|
|
sha384withRSAEncryption (12),
|
|
sha512withRSAEncryption (13),
|
|
sha224withRSAEncryption (14) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the algorithm used for the issuer's signature on the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertEntry 7 }
|
|
|
|
rcDigitalCertCertificateSignature OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..2049))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the issuer's signature on the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertEntry 8 }
|
|
|
|
|
|
rcDigitalCertSubject OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the details of the subject on its certificate as issued by Certificate Authority "
|
|
::= { rcDigitalCertEntry 9 }
|
|
|
|
|
|
rcDigitalCertSubjectPublicKeyAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER { rsaEncryption (1),
|
|
md2withRSAEncryption (2),
|
|
md4withRSAEncryption (3),
|
|
md5withRSAEncryption (4),
|
|
sha1withRSAEncryption (5),
|
|
sha256withRSAEncryption (11),
|
|
sha384withRSAEncryption (12),
|
|
sha512withRSAEncryption (13),
|
|
sha224withRSAEncryption (14) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the algorithm used to generate the subject's
|
|
public key for the certificate issued by the Certificate Authority"
|
|
::= { rcDigitalCertEntry 10 }
|
|
|
|
rcDigitalCertSubjectPublicKey OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..2048))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the public key of the subject used to the Certificate Signing Request"
|
|
::= { rcDigitalCertEntry 11 }
|
|
|
|
rcDigitalCertHasBasicConstraint OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies whether certificate contains basic certificate constraint"
|
|
|
|
::= { rcDigitalCertEntry 12 }
|
|
|
|
rcDigitalCertHasKeyUsage OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies whether certificate contains basic key usage constraint"
|
|
|
|
::= { rcDigitalCertEntry 13 }
|
|
|
|
|
|
rcDigitalCertIsCa OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies if this is ca certificate or not"
|
|
::= { rcDigitalCertEntry 14 }
|
|
|
|
|
|
rcDigitalCertKeyUsage OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
digitalSignature(0),
|
|
nonRepudiation(1),
|
|
keyEncipherment(2),
|
|
dataEncipherment(3),
|
|
keyAgreement(4),
|
|
keyCertSign(5),
|
|
cRLSign(6),
|
|
encipherOnly(7),
|
|
decipherOnly(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the purpose of the key used in the
|
|
certificate.It is represented in form of bits as follows-
|
|
bit 0 - digitalSignature
|
|
bit 1 - nonRepudiation
|
|
bit 2 - keyEncipherment
|
|
bit 3 - dataEncipherment
|
|
bit 4 - keyAgreement
|
|
bit 5 - keyCertSign
|
|
bit 6 - cRLSign
|
|
bit 7 - encipherOnly
|
|
bit 8 - decipherOnly"
|
|
::= { rcDigitalCertEntry 15 }
|
|
|
|
|
|
|
|
|
|
rcDigitalCertStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..129))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the status of the certificate"
|
|
::= { rcDigitalCertEntry 16 }
|
|
|
|
|
|
rcDigitalCertInstalled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies whether the certificate is installed or not"
|
|
::= { rcDigitalCertEntry 17 }
|
|
|
|
rcDigitalCertCdpUrl OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the CDP URL present in the Extensions field of the Digital Certificate"
|
|
::= { rcDigitalCertEntry 18 }
|
|
|
|
rcDigitalCertOcspUrl OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the OCSP URL present in the AIA field of the Digital Certificate"
|
|
::= { rcDigitalCertEntry 19 }
|
|
|
|
rcDigitalCertExtendedKeyUsage OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the purpose for which the key may be used,
|
|
in addition to or in place of the basic purposes indicated in the key-usage field of the certificate"
|
|
::= { rcDigitalCertEntry 20 }
|
|
|
|
|
|
|
|
-- certificate store table
|
|
|
|
rcDigitalCertStoreTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcDigitalCertStoreEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "table of information about offline intermidate CA and root certificate"
|
|
::= { rcDigitalCertObjects 5 }
|
|
|
|
rcDigitalCertStoreEntry OBJECT-TYPE
|
|
SYNTAX RcDigitalCertStoreEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "entry containing
|
|
information about offline intermidate CA and root digital certificates"
|
|
INDEX { rcDigitalCertStoreType,
|
|
rcDigitalCertStoreCommonName
|
|
}
|
|
::= { rcDigitalCertStoreTable 1 }
|
|
|
|
RcDigitalCertStoreEntry ::= SEQUENCE {
|
|
rcDigitalCertStoreType INTEGER,
|
|
rcDigitalCertStoreCommonName DisplayString,
|
|
rcDigitalCertStoreVersionNumber DisplayString,
|
|
rcDigitalCertStoreSerialNumber DisplayString,
|
|
rcDigitalCertStoreIssuerName RcLongDisplayString,
|
|
rcDigitalCertStoreValidStartPeriod DateAndTime,
|
|
rcDigitalCertStoreValidEndPeriod DateAndTime,
|
|
rcDigitalCertStoreCertificateSignatureAlgorithm INTEGER,
|
|
rcDigitalCertStoreCertificateSignature RcLongDisplayString,
|
|
rcDigitalCertStoreSubject RcLongDisplayString,
|
|
rcDigitalCertStoreSubjectPublicKeyAlgorithm INTEGER,
|
|
rcDigitalCertStoreSubjectPublicKey RcLongDisplayString,
|
|
rcDigitalCertStoreHasBasicConstraint TruthValue,
|
|
rcDigitalCertStoreHasKeyUsage TruthValue,
|
|
rcDigitalCertStoreIsCa TruthValue,
|
|
rcDigitalCertStoreKeyUsage BITS,
|
|
rcDigitalCertStoreStatus DisplayString,
|
|
rcDigitalCertStoreInstalled TruthValue,
|
|
rcDigitalCertStoreCdpUrl RcLongDisplayString,
|
|
rcDigitalCertStoreOcspUrl RcLongDisplayString,
|
|
rcDigitalCertStoreExtendedKeyUsage DisplayString,
|
|
rcDigitalCertStoreCaFileName DisplayString
|
|
}
|
|
|
|
rcDigitalCertStoreType OBJECT-TYPE
|
|
SYNTAX INTEGER { caCert (1),
|
|
rootCaCert (2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "uniquely identifies the certificate
|
|
'caCert' - Certificate Authority's Certificate
|
|
'rootCaCert' - Root Certificate Authority's Certificate"
|
|
::= { rcDigitalCertStoreEntry 1 }
|
|
|
|
rcDigitalCertStoreCommonName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "defines the Common Name of the Certificate Authority issuing the Digital Certificate"
|
|
::= { rcDigitalCertStoreEntry 2 }
|
|
|
|
rcDigitalCertStoreVersionNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the version number of the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertStoreEntry 3 }
|
|
|
|
rcDigitalCertStoreSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the serial number of the certificate for the subject as issued by the Certificate Authority "
|
|
::= {rcDigitalCertStoreEntry 4 }
|
|
|
|
rcDigitalCertStoreIssuerName OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the issuer's name of the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertStoreEntry 5 }
|
|
|
|
|
|
rcDigitalCertStoreValidStartPeriod OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the start date of the validation period of the certificate for the subject as issued by the Certificate Authority "
|
|
::= { rcDigitalCertStoreEntry 6 }
|
|
|
|
|
|
rcDigitalCertStoreValidEndPeriod OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the last date of the validation period of the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertStoreEntry 7 }
|
|
|
|
rcDigitalCertStoreCertificateSignatureAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER { rsaEncryption (1),
|
|
md2withRSAEncryption (2),
|
|
md4withRSAEncryption (3),
|
|
md5withRSAEncryption (4),
|
|
sha1withRSAEncryption (5),
|
|
sha256withRSAEncryption (11),
|
|
sha384withRSAEncryption (12),
|
|
sha512withRSAEncryption (13),
|
|
sha224withRSAEncryption (14) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the algorithm used for the issuer's signature on the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertStoreEntry 8 }
|
|
|
|
rcDigitalCertStoreCertificateSignature OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..2049))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the issuer's signature on the certificate for the subject as issued by the Certificate Authority"
|
|
::= { rcDigitalCertStoreEntry 9 }
|
|
|
|
|
|
rcDigitalCertStoreSubject OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the details of the subject on its certificate as issued by Certificate Authority "
|
|
::= { rcDigitalCertStoreEntry 10 }
|
|
|
|
|
|
rcDigitalCertStoreSubjectPublicKeyAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER { rsaEncryption (1),
|
|
md2withRSAEncryption (2),
|
|
md4withRSAEncryption (3),
|
|
md5withRSAEncryption (4),
|
|
sha1withRSAEncryption (5),
|
|
sha256withRSAEncryption (11),
|
|
sha384withRSAEncryption (12),
|
|
sha512withRSAEncryption (13),
|
|
sha224withRSAEncryption (14) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the algorithm used to generate the subject's
|
|
public key for the certificate issued by the Certificate Authority"
|
|
::= { rcDigitalCertStoreEntry 11 }
|
|
|
|
rcDigitalCertStoreSubjectPublicKey OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..2048))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the public key of the subject used to the Certificate Signing Request"
|
|
::= { rcDigitalCertStoreEntry 12 }
|
|
|
|
rcDigitalCertStoreHasBasicConstraint OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies whether certificate contains basic certificate constraint"
|
|
|
|
::= { rcDigitalCertStoreEntry 13 }
|
|
|
|
rcDigitalCertStoreHasKeyUsage OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies whether certificate contains basic key usage constraint"
|
|
|
|
::= { rcDigitalCertStoreEntry 14 }
|
|
|
|
|
|
rcDigitalCertStoreIsCa OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies if this is ca certificate or not"
|
|
::= { rcDigitalCertStoreEntry 15 }
|
|
|
|
|
|
rcDigitalCertStoreKeyUsage OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
digitalSignature(0),
|
|
nonRepudiation(1),
|
|
keyEncipherment(2),
|
|
dataEncipherment(3),
|
|
keyAgreement(4),
|
|
keyCertSign(5),
|
|
cRLSign(6),
|
|
encipherOnly(7),
|
|
decipherOnly(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the purpose of the key used in the
|
|
certificate.It is represented in form of bits as follows-
|
|
bit 0 - digitalSignature
|
|
bit 1 - nonRepudiation
|
|
bit 2 - keyEncipherment
|
|
bit 3 - dataEncipherment
|
|
bit 4 - keyAgreement
|
|
bit 5 - keyCertSign
|
|
bit 6 - cRLSign
|
|
bit 7 - encipherOnly
|
|
bit 8 - decipherOnly"
|
|
::= { rcDigitalCertStoreEntry 16 }
|
|
|
|
|
|
|
|
|
|
rcDigitalCertStoreStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..129))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the status of the certificate"
|
|
::= { rcDigitalCertStoreEntry 17 }
|
|
|
|
|
|
rcDigitalCertStoreInstalled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies whether the certificate is installed or not"
|
|
::= { rcDigitalCertStoreEntry 18 }
|
|
|
|
rcDigitalCertStoreCdpUrl OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the CDP URL present in the Extensions field of the Digital Certificate"
|
|
::= { rcDigitalCertStoreEntry 19 }
|
|
|
|
rcDigitalCertStoreOcspUrl OBJECT-TYPE
|
|
SYNTAX RcLongDisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the OCSP URL present in the AIA field of the Digital Certificate"
|
|
::= { rcDigitalCertStoreEntry 20 }
|
|
|
|
rcDigitalCertStoreExtendedKeyUsage OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "specifies the purpose for which the key may be used,
|
|
in addition to or in place of the basic purposes indicated in the key-usage field of the certificate"
|
|
::= { rcDigitalCertStoreEntry 21 }
|
|
|
|
rcDigitalCertStoreCaFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "stores the intermediate and root Certificate Authority's certificate
|
|
filename obtained offline "
|
|
::={ rcDigitalCertStoreEntry 22 }
|
|
|
|
|
|
END
|