Observium_CE/mibs/nokia/TIMETRA-LMP-MIB

1676 lines
63 KiB
Plaintext

TIMETRA-LMP-MIB DEFINITIONS ::= BEGIN
IMPORTS
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Counter32, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
RowStatus, TimeStamp, TruthValue
FROM SNMPv2-TC
timetraSRMIBModules, tmnxSRConfs,
tmnxSRNotifyPrefix, tmnxSRObjs
FROM TIMETRA-GLOBAL-MIB
TNamedItemOrEmpty, TmnxAdminState,
TmnxPortID, TmnxVRtrID
FROM TIMETRA-TC-MIB
vRtrID
FROM TIMETRA-VRTR-MIB
;
timetraLmpMIBModule MODULE-IDENTITY
LAST-UPDATED "201701010000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision the Link
Management Protocol (LMP) components of the Nokia SROS device.
Copyright (c) 2014-2018 Nokia. All rights reserved. Reproduction of
this document is authorized on the condition that the foregoing
copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains all
title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied `as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "201701010000Z"
DESCRIPTION
"Rev 15.0 01 Jan 2017 00:00
15.0 release of the TIMETRA-LMP-MIB."
REVISION "201404240000Z"
DESCRIPTION
"Rev 0.1 24 Apr 2014 00:00
Initial version of the TIMETRA-LMP-MIB."
::= { timetraSRMIBModules 100 }
tmnxLmpObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 100 }
tmnxLmpConfigTimeStamps OBJECT IDENTIFIER ::= { tmnxLmpObjs 1 }
tmnxLmpVRtrTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTableLastChanged indicates the time, since
system startup, when tmnxLmpVRtrTable last changed configuration."
::= { tmnxLmpConfigTimeStamps 1 }
tmnxLmpVRtrPeerTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerTableLastChanged indicates the time, since
system startup, when tmnxLmpVRtrPeerTable last changed configuration."
::= { tmnxLmpConfigTimeStamps 2 }
tmnxLmpVRtrCcTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcTableLastChanged indicates the time, since
system startup, when tmnxLmpVRtrControlChannelTable last changed
configuration."
::= { tmnxLmpConfigTimeStamps 3 }
tmnxLmpVRtrTeLinkTableLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkTableLastChange indicates the time,
since system startup, when tmnxLmpVRtrTeLinkTable last changed
configuration."
::= { tmnxLmpConfigTimeStamps 4 }
tmnxLmpVRtrDbLinkTableLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrDbLinkTableLastChange indicates the time,
since system startup, when tmnxLmpVRtrDbLinkTable last changed
configuration."
::= { tmnxLmpConfigTimeStamps 5 }
tmnxLmpConfigurations OBJECT IDENTIFIER ::= { tmnxLmpObjs 2 }
tmnxLmpVRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLmpVRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrTable contains the Link Management Protocol (LMP)
configuration information for the virtual router instances."
::= { tmnxLmpConfigurations 1 }
tmnxLmpVRtrEntry OBJECT-TYPE
SYNTAX TmnxLmpVRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrEntry consists of the LMP configurable objects for a
virtual router instance."
INDEX { vRtrID }
::= { tmnxLmpVRtrTable 1 }
TmnxLmpVRtrEntry ::= SEQUENCE
{
tmnxLmpVRtrRowStatus RowStatus,
tmnxLmpVRtrLastChanged TimeStamp,
tmnxLmpVRtrAdminState TmnxAdminState,
tmnxLmpVRtrOperState INTEGER,
tmnxLmpVRtrGmplsLoopbackAddrType InetAddressType,
tmnxLmpVRtrGmplsLoopbackAddress InetAddress
}
tmnxLmpVRtrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrRowStatus specifies the row status. It allows
the creation and deletion of the LMP on the virtual router instance."
::= { tmnxLmpVRtrEntry 1 }
tmnxLmpVRtrLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrLastChanged indicates the time, since system
startup, that the configuration of the LMP on the virtual router
instance was created or modified."
::= { tmnxLmpVRtrEntry 2 }
tmnxLmpVRtrAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrAdminState specifies the administrative state
of the LMP on the virtual router instance."
DEFVAL { outOfService }
::= { tmnxLmpVRtrEntry 3 }
tmnxLmpVRtrOperState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrOperState indicates the operational state of
the LMP on the virtual router instance."
::= { tmnxLmpVRtrEntry 4 }
tmnxLmpVRtrGmplsLoopbackAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrGmplsLoopbackAddrType specifies the address
type of tmnxLmpVRtrGmplsLoopbackAddress."
DEFVAL { unknown }
::= { tmnxLmpVRtrEntry 5 }
tmnxLmpVRtrGmplsLoopbackAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrGmplsLoopbackAddress specifies the GMPLS
loopback address for the virtual router instance."
DEFVAL { ''H }
::= { tmnxLmpVRtrEntry 6 }
tmnxLmpVRtrPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLmpVRtrPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrPeerTable contains the peer node(s) to which control
channels may be established."
REFERENCE
"Link Management Protocol, RFC 4204."
::= { tmnxLmpConfigurations 2 }
tmnxLmpVRtrPeerEntry OBJECT-TYPE
SYNTAX TmnxLmpVRtrPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrPeerEntry consists of every pair of nodes that can
establish control channels on a given virtual router instance."
INDEX {
vRtrID,
tmnxLmpVRtrPeerNodeId
}
::= { tmnxLmpVRtrPeerTable 1 }
TmnxLmpVRtrPeerEntry ::= SEQUENCE
{
tmnxLmpVRtrPeerNodeId Unsigned32,
tmnxLmpVRtrPeerRowStatus RowStatus,
tmnxLmpVRtrPeerLastChanged TimeStamp,
tmnxLmpVRtrPeerAdminState TmnxAdminState,
tmnxLmpVRtrPeerOperState INTEGER,
tmnxLmpVRtrPeerLoopbackAddrType InetAddressType,
tmnxLmpVRtrPeerLoopbackAddress InetAddress,
tmnxLmpVRtrPeerRetransmitIntvl Unsigned32,
tmnxLmpVRtrPeerRetryLimit Unsigned32,
tmnxLmpVRtrPeerRetransmitDelta Unsigned32,
tmnxLmpVRtrPeerCcVRtrId TmnxVRtrID,
tmnxLmpVRtrPeerGmplsLpbkAddrType InetAddressType,
tmnxLmpVRtrPeerGmplsLpbkAddress InetAddress
}
tmnxLmpVRtrPeerNodeId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerNodeId specifies the unique node
identifier of this remote node on the given virtual router instance."
::= { tmnxLmpVRtrPeerEntry 1 }
tmnxLmpVRtrPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerRowStatus specifies the row status. It
allows the creation and deletion of this remote node on the given
virtual router instance."
::= { tmnxLmpVRtrPeerEntry 2 }
tmnxLmpVRtrPeerLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerLastChanged indicates the time, since
system startup, that the configuration of this remote node was created
or modified."
::= { tmnxLmpVRtrPeerEntry 3 }
tmnxLmpVRtrPeerAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerAdminState specifies the administrative
state of LMP on this remote node."
DEFVAL { outOfService }
::= { tmnxLmpVRtrPeerEntry 4 }
tmnxLmpVRtrPeerOperState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerOperState indicates the operational state
of LMP on this remote node."
::= { tmnxLmpVRtrPeerEntry 5 }
tmnxLmpVRtrPeerLoopbackAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerLoopbackAddrType specifies the address
type of tmnxLmpVRtrPeerLoopbackAddress."
DEFVAL { unknown }
::= { tmnxLmpVRtrPeerEntry 6 }
tmnxLmpVRtrPeerLoopbackAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerLoopbackAddress specifies the loopback
address for this remote node."
DEFVAL { ''H }
::= { tmnxLmpVRtrPeerEntry 7 }
tmnxLmpVRtrPeerRetransmitIntvl OBJECT-TYPE
SYNTAX Unsigned32 (10..60000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerRetransmitIntvl specifies the initial
retransmission interval that is used for the retransmission of
messages that require acknowledgement. This object, along with
tmnxLmpVRtrPeerRetryLimit, is used to implement the
congestion-handling mechanism defined in Section 10 of the Link
Management Protocol specification, which is based on RFC 2914."
REFERENCE
"Link Management Protocol, RFC 4204.
Congestion Control Principles, RFC 2914."
DEFVAL { 500 }
::= { tmnxLmpVRtrPeerEntry 8 }
tmnxLmpVRtrPeerRetryLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerRetryLimit specifies the maximum number of
times a message is transmitted without being acknowledged. A value of
0 is used to indicate that a node should never stop retransmission.
This object, along with tmnxLmpVRtrPeerRetransmitIntvl, is used to
implement the congestion-handling mechanism as defined in Section 10
of the Link Management Protocol specification, which is based on RFC
2914."
REFERENCE
"Link Management Protocol, RFC 4204.
Congestion Control Principles, RFC 2914."
DEFVAL { 0 }
::= { tmnxLmpVRtrPeerEntry 9 }
tmnxLmpVRtrPeerRetransmitDelta OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerRetransmitDelta indicates the speed with
which the sender increases the retransmission interval, as explained
in Section 10 of the Link Management Protocol specification, which is
based on RFC 2914. The ratio of two successive retransmission
intervals is (1 + Delta)."
REFERENCE
"Link Management Protocol, RFC 4204.
Congestion Control Principles, RFC 2914."
::= { tmnxLmpVRtrPeerEntry 10 }
tmnxLmpVRtrPeerCcVRtrId OBJECT-TYPE
SYNTAX TmnxVRtrID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerCcVRtrId specifies the virtual router
instance used by the peer's control channels.
This object must be set in the same SNMP set PDU as
tmnxLmpVRtrPeerGmplsLpbkAddress, and tmnxLmpVRtrPeerGmplsLpbkAddrType."
DEFVAL { 1 }
::= { tmnxLmpVRtrPeerEntry 11 }
tmnxLmpVRtrPeerGmplsLpbkAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerGmplsLpbkAddrType specifies the address
type of tmnxLmpVRtrPeerGmplsLpbkAddress.
This object must be set in the same SNMP set PDU as
tmnxLmpVRtrPeerGmplsLpbkAddress, and tmnxLmpVRtrPeerCcVRtrId."
DEFVAL { unknown }
::= { tmnxLmpVRtrPeerEntry 12 }
tmnxLmpVRtrPeerGmplsLpbkAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrPeerGmplsLpbkAddress specifies the GMPLS
loopback address used be the peer.
This object is only valid when the value of tmnxLmpVRtrPeerCcVRtrId is
not 1.
This object must be set in the same SNMP set PDU as
tmnxLmpVRtrPeerGmplsLpbkAddrType, and tmnxLmpVRtrPeerCcVRtrId."
DEFVAL { ''H }
::= { tmnxLmpVRtrPeerEntry 13 }
tmnxLmpVRtrControlChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLmpVRtrControlChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrControlChannelTable contains LMP control channel
information."
REFERENCE
"Link Management Protocol, RFC 4204."
::= { tmnxLmpConfigurations 3 }
tmnxLmpVRtrControlChannelEntry OBJECT-TYPE
SYNTAX TmnxLmpVRtrControlChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrControlChannelEntry consists of the configurable
objects for a control channel on a given peer and virtual router
instance."
INDEX {
vRtrID,
tmnxLmpVRtrPeerNodeId,
tmnxLmpVRtrCcId
}
::= { tmnxLmpVRtrControlChannelTable 1 }
TmnxLmpVRtrControlChannelEntry ::= SEQUENCE
{
tmnxLmpVRtrCcId Unsigned32,
tmnxLmpVRtrCcRowStatus RowStatus,
tmnxLmpVRtrCcLastChanged TimeStamp,
tmnxLmpVRtrCcAdminState TmnxAdminState,
tmnxLmpVRtrCcOperState INTEGER,
tmnxLmpVRtrCcRemoteId Unsigned32,
tmnxLmpVRtrCcPeerIfAddressType InetAddressType,
tmnxLmpVRtrCcPeerIfAddress InetAddress,
tmnxLmpVRtrCcSetupRole INTEGER,
tmnxLmpVRtrCcHelloInterval Unsigned32,
tmnxLmpVRtrCcHelloIntvNeg Unsigned32,
tmnxLmpVRtrCcHelloDeadInterval Unsigned32,
tmnxLmpVRtrCcHelloDeadIntvNeg Unsigned32,
tmnxLmpVRtrCcTtl Unsigned32,
tmnxLmpVRtrCcIsTunneled TruthValue
}
tmnxLmpVRtrCcId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcId specifies a unique value which identifies
the control channel on the given virtual router instance."
::= { tmnxLmpVRtrControlChannelEntry 1 }
tmnxLmpVRtrCcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcRowStatus specifies the row status. It
allows the creation and deletion of this control channel on the given
virtual router instance."
::= { tmnxLmpVRtrControlChannelEntry 2 }
tmnxLmpVRtrCcLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcLastChanged indicates the time, since system
startup, that the configuration of this control channel was created or
modified."
::= { tmnxLmpVRtrControlChannelEntry 3 }
tmnxLmpVRtrCcAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcAdminState specifies the administrative
state of this control channel."
DEFVAL { outOfService }
::= { tmnxLmpVRtrControlChannelEntry 4 }
tmnxLmpVRtrCcOperState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
configSnd (3),
configRcv (4),
active (5),
goingDown (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcOperState indicates the operational state of
this control channel."
::= { tmnxLmpVRtrControlChannelEntry 5 }
tmnxLmpVRtrCcRemoteId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcRemoteId indicates the remote control
channel identifier. It is determined during the negotiation phase. A
value of zero means that the remote control channel identifier has not
yet been learned."
::= { tmnxLmpVRtrControlChannelEntry 6 }
tmnxLmpVRtrCcPeerIfAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcPeerIfAddressType specifies the remote
control channel IP address type. In point-to-point configuration, this
value can be set to 'unknown (0)'."
DEFVAL { unknown }
::= { tmnxLmpVRtrControlChannelEntry 7 }
tmnxLmpVRtrCcPeerIfAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcPeerIfAddress specifies the remote control
channel Internet address for numbered control channel. The type of
this address is determined by tmnxLmpVRtrCcPeerIfAddressType. The
control channel must be numbered on non-point-to-point configuration.
For point-to-point configuration, the remote control channel address
can be of type 'unknown (0)', in which case this object must be a
zero-length string. The tmnxLmpVRtrCcRemoteId object then identifies
the unnumbered address. "
DEFVAL { ''H }
::= { tmnxLmpVRtrControlChannelEntry 8 }
tmnxLmpVRtrCcSetupRole OBJECT-TYPE
SYNTAX INTEGER {
active (1),
passive (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcSetupRole specifies the role that this node
should take during establishment of this control channel. An active
node will initiate establishment. A passive node will wait for the
remote node to initiate. A pair of nodes that both take the passive
role will never establish communications."
DEFVAL { active }
::= { tmnxLmpVRtrControlChannelEntry 9 }
tmnxLmpVRtrCcHelloInterval OBJECT-TYPE
SYNTAX Unsigned32 (1000..65535)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcHelloInterval specifies the value of the
HelloInterval parameter."
DEFVAL { 1000 }
::= { tmnxLmpVRtrControlChannelEntry 10 }
tmnxLmpVRtrCcHelloIntvNeg OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcHelloIntvNeg indicates the negotiated
HelloInterval value when the control channel is active."
::= { tmnxLmpVRtrControlChannelEntry 11 }
tmnxLmpVRtrCcHelloDeadInterval OBJECT-TYPE
SYNTAX Unsigned32 (3000..65535)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcHelloDeadInterval specifies the value of the
HelloDeadInterval parameter."
DEFVAL { 4000 }
::= { tmnxLmpVRtrControlChannelEntry 12 }
tmnxLmpVRtrCcHelloDeadIntvNeg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcHelloDeadIntvNeg indicates the negotiated
HelloDeadInterval value when the control channel is active."
::= { tmnxLmpVRtrControlChannelEntry 13 }
tmnxLmpVRtrCcTtl OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
UNITS "hops"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcTtl specifies the Time-To-Live (TTL) value
used in the LMP and RSVP control packet IP header."
DEFVAL { 1 }
::= { tmnxLmpVRtrControlChannelEntry 14 }
tmnxLmpVRtrCcIsTunneled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcIsTunneled indicates whether the control
channel on a given peer and virtual router instance is tunneled."
::= { tmnxLmpVRtrControlChannelEntry 15 }
tmnxLmpVRtrTeLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLmpVRtrTeLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrTeLinkTable contains the Traffic Engineering (TE) link
managed by the LMP."
REFERENCE
"Link Management Protocol, RFC 4204."
::= { tmnxLmpConfigurations 4 }
tmnxLmpVRtrTeLinkEntry OBJECT-TYPE
SYNTAX TmnxLmpVRtrTeLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrEntry consists of the configurable objects for a TE
link on a given virtual router instance."
INDEX {
vRtrID,
tmnxLmpVRtrTeLinkId
}
::= { tmnxLmpVRtrTeLinkTable 1 }
TmnxLmpVRtrTeLinkEntry ::= SEQUENCE
{
tmnxLmpVRtrTeLinkId Unsigned32,
tmnxLmpVRtrTeLinkRowStatus RowStatus,
tmnxLmpVRtrTeLinkLastChanged TimeStamp,
tmnxLmpVRtrTeLinkAdminState TmnxAdminState,
tmnxLmpVRtrTeLinkOperState INTEGER,
tmnxLmpVRtrTeLinkName TNamedItemOrEmpty,
tmnxLmpVRtrTeLinkRemoteId Unsigned32,
tmnxLmpVRtrTeLinkPeerNodeId Unsigned32
}
tmnxLmpVRtrTeLinkId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkId specifies a unique value which
identifies this TE link on the given virtual router instance.
The identifiers for TE links (tmnxLmpVRtrTeLinkId) and DB links
(tmnxLmpVRtrDbLinkId) cannot be the same for a particular virtual
router instance."
::= { tmnxLmpVRtrTeLinkEntry 1 }
tmnxLmpVRtrTeLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkRowStatus specifies the row status. It
allows the creation and deletion of this TE link on the given virtual
router instance."
::= { tmnxLmpVRtrTeLinkEntry 2 }
tmnxLmpVRtrTeLinkLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkLastChanged indicates the time, since
system startup, that the configuration of this TE link was created or
modified."
::= { tmnxLmpVRtrTeLinkEntry 3 }
tmnxLmpVRtrTeLinkAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkAdminState specifies the administrative
state of this TE link."
DEFVAL { outOfService }
::= { tmnxLmpVRtrTeLinkEntry 4 }
tmnxLmpVRtrTeLinkOperState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
testing (3),
init (4),
degraded (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkOperState indicates the operational
state of this TE link."
::= { tmnxLmpVRtrTeLinkEntry 5 }
tmnxLmpVRtrTeLinkName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkName specifies a unique name for this TE
link on the given virtual router instance."
DEFVAL { ''H }
::= { tmnxLmpVRtrTeLinkEntry 6 }
tmnxLmpVRtrTeLinkRemoteId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkRemoteId specifies the identifier for
the remote endpoint of this TE link.
Zero indicates this object has not been configured."
DEFVAL { 0 }
::= { tmnxLmpVRtrTeLinkEntry 7 }
tmnxLmpVRtrTeLinkPeerNodeId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkPeerNodeId specifies the node identifier
of the remote node for this TE link.
Zero indicates that this object is not configured."
DEFVAL { 0 }
::= { tmnxLmpVRtrTeLinkEntry 8 }
tmnxLmpVRtrDbLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLmpVRtrDbLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrDbLinkTable contains the Data Bearing (DB) links
managed by the LMP."
REFERENCE
"Link Management Protocol, RFC 4204."
::= { tmnxLmpConfigurations 5 }
tmnxLmpVRtrDbLinkEntry OBJECT-TYPE
SYNTAX TmnxLmpVRtrDbLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrDbLinkEntry consists of the configurable objects for a
DB link on a given TE link and virtual router instance."
INDEX {
vRtrID,
tmnxLmpVRtrTeLinkId,
tmnxLmpVRtrDbLinkId
}
::= { tmnxLmpVRtrDbLinkTable 1 }
TmnxLmpVRtrDbLinkEntry ::= SEQUENCE
{
tmnxLmpVRtrDbLinkId Unsigned32,
tmnxLmpVRtrDbLinkRowStatus RowStatus,
tmnxLmpVRtrDbLinkLastChanged TimeStamp,
tmnxLmpVRtrDbLinkAdminState TmnxAdminState,
tmnxLmpVRtrDbLinkOperState INTEGER,
tmnxLmpVRtrDbLinkPortId TmnxPortID,
tmnxLmpVRtrDbLinkRemoteId Unsigned32,
tmnxLmpVRtrDbLinkReasonDownFlags BITS
}
tmnxLmpVRtrDbLinkId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrDbLinkId specifies a unique value which
identifies this DB link on the given virtual router instance.
The identifiers for TE links (tmnxLmpVRtrTeLinkId) and DB links
(tmnxLmpVRtrDbLinkId) cannot be the same for a particular virtual
router instance."
::= { tmnxLmpVRtrDbLinkEntry 1 }
tmnxLmpVRtrDbLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrDbLinkRowStatus specifies the row status. It
allows the creation and deletion of this DB link on the given TE link
and virtual router instance."
::= { tmnxLmpVRtrDbLinkEntry 2 }
tmnxLmpVRtrDbLinkLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrDbLinkLastChanged indicates the time, since
system startup, that the configuration of this DB link was created or
modified."
::= { tmnxLmpVRtrDbLinkEntry 3 }
tmnxLmpVRtrDbLinkAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrDbLinkAdminState specifies the administrative
state of this DB link."
DEFVAL { outOfService }
::= { tmnxLmpVRtrDbLinkEntry 4 }
tmnxLmpVRtrDbLinkOperState OBJECT-TYPE
SYNTAX INTEGER {
upAlloc (1),
upFree (2),
down (3),
testing (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrDbLinkOperState indicates the operational
state of this DB link."
::= { tmnxLmpVRtrDbLinkEntry 5 }
tmnxLmpVRtrDbLinkPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrDbLinkPortId specifies the port identifier of
the port associated to this DB link.
A value of '1e000000'H indicates this object has not been configured."
DEFVAL { '1e000000'H }
::= { tmnxLmpVRtrDbLinkEntry 6 }
tmnxLmpVRtrDbLinkRemoteId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrDbLinkRemoteId specifies the identifier of the
remote endpoint for this DB link.
Zero indicates this object has not been configured."
DEFVAL { 0 }
::= { tmnxLmpVRtrDbLinkEntry 7 }
tmnxLmpVRtrDbLinkReasonDownFlags OBJECT-TYPE
SYNTAX BITS {
unknown (0),
adminDn (1),
lpcFault (2),
remoteLkFault (3),
portAdminDn (4),
portFault (5),
gmplsTeDn (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrDbLinkReasonDownFlags indicates the reason(s)
why this DB link is operationally down.
The recognized BIT values are:
unknown (0) - unspecified or unknown
adminDn (1) - the DB link or related LMP entity (i.e. TE
link, peer, etc.) is administratively down, or
- parent TE link is not associated with any peer
lpcFault (2) - the link property correlation failed
remoteLkFault (3) - the DB Link Summary message received had the
'Failed Link' flag set by the peer
portAdminDn (4) - the port or associated MDA/IOM is
administratively down
portFault (5) - the port is either not present, or the DB link
detected a signal failure (e.g. loss of light)
gmplsTeDn (6) - the GMPLS TE link (vRtrGmplsTeLinkEntry) is
either not present or administratively down"
::= { tmnxLmpVRtrDbLinkEntry 8 }
tmnxLmpStatistics OBJECT IDENTIFIER ::= { tmnxLmpObjs 3 }
tmnxLmpVRtrControlChanStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLmpVRtrControlChanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrControlChanStatsTable contains the LMP control channel
statistics counters for a virtual router instance."
::= { tmnxLmpStatistics 1 }
tmnxLmpVRtrControlChanStatsEntry OBJECT-TYPE
SYNTAX TmnxLmpVRtrControlChanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrControlChanStatsEntry consists of statistical
information about a control channel for a virtual router instance."
INDEX {
vRtrID,
tmnxLmpVRtrPeerNodeId,
tmnxLmpVRtrCcId
}
::= { tmnxLmpVRtrControlChanStatsTable 1 }
TmnxLmpVRtrControlChanStatsEntry ::= SEQUENCE
{
tmnxLmpVRtrCcInErrors Counter32,
tmnxLmpVRtrCcOutErrors Counter32,
tmnxLmpVRtrCcConfigReceived Counter32,
tmnxLmpVRtrCcConfigSent Counter32,
tmnxLmpVRtrCcConfigRetransmit Counter32,
tmnxLmpVRtrCcConfigAckReceived Counter32,
tmnxLmpVRtrCcConfigAckSent Counter32,
tmnxLmpVRtrCcConfigNackReceived Counter32,
tmnxLmpVRtrCcConfigNackSent Counter32,
tmnxLmpVRtrCcHelloReceived Counter32,
tmnxLmpVRtrCcHelloSent Counter32,
tmnxLmpVRtrCcLinkSumReceived Counter32,
tmnxLmpVRtrCcLinkSumSent Counter32,
tmnxLmpVRtrCcLinkSumRetransmit Counter32,
tmnxLmpVRtrCcLinkSumAckReceived Counter32,
tmnxLmpVRtrCcLinkSumAckSent Counter32,
tmnxLmpVRtrCcLinkSumNackReceived Counter32,
tmnxLmpVRtrCcLinkSumNackSent Counter32,
tmnxLmpVRtrCcDiscontinuityTime TimeStamp
}
tmnxLmpVRtrCcInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcInErrors indicates the number of inbound
packets that contained errors preventing them from being processed by
LMP.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 1 }
tmnxLmpVRtrCcOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcOutErrors indicates the number of outbound
packets that could not be transmitted because of errors.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 2 }
tmnxLmpVRtrCcConfigReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcConfigReceived indicates the number of
Config messages that have been received on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 3 }
tmnxLmpVRtrCcConfigSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcConfigSent indicates the number of Config
messages that have been sent on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 4 }
tmnxLmpVRtrCcConfigRetransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcConfigRetransmit indicates the number of
Config messages that have been retransmitted over this control
channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 5 }
tmnxLmpVRtrCcConfigAckReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcConfigAckReceived indicates the number of
ConfigAck messages that have been received on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 6 }
tmnxLmpVRtrCcConfigAckSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcConfigAckSent indicates the number of
ConfigAck messages that have been sent on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 7 }
tmnxLmpVRtrCcConfigNackReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcConfigNackReceived indicates the number of
ConfigNack messages that have been received on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 8 }
tmnxLmpVRtrCcConfigNackSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcConfigNackSent indicates the number of
ConfigNack messages that have been sent on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 9 }
tmnxLmpVRtrCcHelloReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcHelloReceived indicates the number of Hello
messages that have been received on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 10 }
tmnxLmpVRtrCcHelloSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcHelloSent indicates the number of Hello
messages that have been sent on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 12 }
tmnxLmpVRtrCcLinkSumReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcLinkSumReceived indicates the number of
LinkSummary messages that have been received on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 13 }
tmnxLmpVRtrCcLinkSumSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcLinkSumSent indicates the number of
LinkSummary messages that have been sent on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 14 }
tmnxLmpVRtrCcLinkSumRetransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcLinkSumRetransmit indicates the number of
LinkSummary messages that have been retransmitted over this control
channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 15 }
tmnxLmpVRtrCcLinkSumAckReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcLinkSumAckReceived indicates the number of
LinkSummaryAck messages that have been received on this control
channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 16 }
tmnxLmpVRtrCcLinkSumAckSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcLinkSumAckSent indicates the number of
LinkSummaryAck messages that have been sent on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 17 }
tmnxLmpVRtrCcLinkSumNackReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcLinkSumNackReceived indicates the number of
LinkSummaryNack messages that have been received on this control
channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 18 }
tmnxLmpVRtrCcLinkSumNackSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcLinkSumNackSent indicates the number of
LinkSummaryNack messages that have been sent on this control channel.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrCcDiscontinuityTime."
::= { tmnxLmpVRtrControlChanStatsEntry 19 }
tmnxLmpVRtrCcDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrCcDiscontinuityTime indicates the sysUpTime on
the most recent occasion at which one or more of this control
channel's counters suffered a discontinuity. The relevant counters are
the specific instances associated with this control channel of any
Counter32 object contained in the tmnxLmpVRtrControlChanStatsTable. If
no such discontinuities have occurred since the last re-initialization
of the local management subsystem, then this object contains a zero
value."
::= { tmnxLmpVRtrControlChanStatsEntry 20 }
tmnxLmpVRtrTeLinkStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLmpVRtrTeLinkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrTeLinkStatsTable contains the LMP Traffic Engineering
(TE) link statistics counters for a virtual router instance."
::= { tmnxLmpStatistics 2 }
tmnxLmpVRtrTeLinkStatsEntry OBJECT-TYPE
SYNTAX TmnxLmpVRtrTeLinkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLmpVRtrTeLinkStatsEntry consists of statistical information
about a TE link for a virtual router instance."
INDEX {
vRtrID,
tmnxLmpVRtrTeLinkId
}
::= { tmnxLmpVRtrTeLinkStatsTable 1 }
TmnxLmpVRtrTeLinkStatsEntry ::= SEQUENCE
{
tmnxLmpVRtrTeLinkSumReceived Counter32,
tmnxLmpVRtrTeLinkSumSent Counter32,
tmnxLmpVRtrTeLinkSumRetransmit Counter32,
tmnxLmpVRtrTeLinkSumAckReceived Counter32,
tmnxLmpVRtrTeLinkSumAckSent Counter32,
tmnxLmpVRtrTeLinkSumNackReceived Counter32,
tmnxLmpVRtrTeLinkSumNackSent Counter32,
tmnxLmpVRtrTeLinkDiscntnuityTime TimeStamp
}
tmnxLmpVRtrTeLinkSumReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkSumReceived indicates the number of
LinkSummary messages that have been received for this TE link.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime."
::= { tmnxLmpVRtrTeLinkStatsEntry 1 }
tmnxLmpVRtrTeLinkSumSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkSumSent indicates the number of
LinkSummary messages that have been sent for this TE link.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime."
::= { tmnxLmpVRtrTeLinkStatsEntry 2 }
tmnxLmpVRtrTeLinkSumRetransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkSumRetransmit indicates the number of
LinkSummary messages that have been retransmitted for this TE link.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime."
::= { tmnxLmpVRtrTeLinkStatsEntry 3 }
tmnxLmpVRtrTeLinkSumAckReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkSumAckReceived indicates the number of
LinkSummaryAck messages that have been received for this TE link.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime."
::= { tmnxLmpVRtrTeLinkStatsEntry 4 }
tmnxLmpVRtrTeLinkSumAckSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkSumAckSent indicates the number of
LinkSummaryAck messages that have been sent for this TE link.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime."
::= { tmnxLmpVRtrTeLinkStatsEntry 5 }
tmnxLmpVRtrTeLinkSumNackReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkSumNackReceived indicates the number of
LinkSummaryNack messages that have been received for this TE link.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime."
::= { tmnxLmpVRtrTeLinkStatsEntry 6 }
tmnxLmpVRtrTeLinkSumNackSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkSumNackSent indicates the number of
LinkSummaryNack messages that have been sent for this TE link.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as
indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime."
::= { tmnxLmpVRtrTeLinkStatsEntry 7 }
tmnxLmpVRtrTeLinkDiscntnuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLmpVRtrTeLinkDiscntnuityTime indicates the sysUpTime
on the most recent occasion at which one or more of this TE link's
counters suffered a discontinuity. The relevant counters are the
specific instances associated with this TE link of any Counter32
object contained in the tmnxLmpVRtrTeLinkStatsTable. If no such
discontinuities have occurred since the last re-initialization of the
local management subsystem, then this object contains a zero value."
::= { tmnxLmpVRtrTeLinkStatsEntry 8 }
tmnxLmpNotifyObjects OBJECT IDENTIFIER ::= { tmnxLmpObjs 4 }
tmnxLmpConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 100 }
tmnxLmpCompliances OBJECT IDENTIFIER ::= { tmnxLmpConformance 1 }
tmnxLmpComplianceV13v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the Link Management
Protocol for Release 13.0 on Nokia SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxLmpVRtrGroupV13v0,
tmnxLmpVRtrPeerGroupV13v0,
tmnxLmpVRtrCcGroupV13v0,
tmnxLmpVRtrTeLinkGroupV13v0,
tmnxLmpVRtrDbLinkGroupV13v0,
tmnxLmpVRtrCcStatsGroupV13v0,
tmnxLmpVRtrTeLinkStatsGroupV13v0,
tmnxLmpVRtrNotifGroupV13v0
}
::= { tmnxLmpCompliances 1 }
tmnxLmpComplianceV15v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the Link Management
Protocol for Release 15.0 on Nokia SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxLmpVRtrPeerGroupV15v0,
tmnxLmpVRtrCtrlChannelGroupV15v0
}
::= { tmnxLmpCompliances 2 }
tmnxLmpGroups OBJECT IDENTIFIER ::= { tmnxLmpConformance 2 }
tmnxLmpV13v0Groups OBJECT IDENTIFIER ::= { tmnxLmpGroups 1 }
tmnxLmpVRtrGroupV13v0 OBJECT-GROUP
OBJECTS {
tmnxLmpVRtrTableLastChanged,
tmnxLmpVRtrRowStatus,
tmnxLmpVRtrLastChanged,
tmnxLmpVRtrAdminState,
tmnxLmpVRtrOperState,
tmnxLmpVRtrGmplsLoopbackAddrType,
tmnxLmpVRtrGmplsLoopbackAddress
}
STATUS current
DESCRIPTION
"The group of objects maintaining the Link Management Protocol (LMP)
configuration for the virtual router instances on Nokia SROS series
systems for Release 13.0."
::= { tmnxLmpV13v0Groups 1 }
tmnxLmpVRtrPeerGroupV13v0 OBJECT-GROUP
OBJECTS {
tmnxLmpVRtrPeerTableLastChanged,
tmnxLmpVRtrPeerRowStatus,
tmnxLmpVRtrPeerLastChanged,
tmnxLmpVRtrPeerAdminState,
tmnxLmpVRtrPeerOperState,
tmnxLmpVRtrPeerLoopbackAddrType,
tmnxLmpVRtrPeerLoopbackAddress,
tmnxLmpVRtrPeerRetransmitIntvl,
tmnxLmpVRtrPeerRetryLimit,
tmnxLmpVRtrPeerRetransmitDelta
}
STATUS current
DESCRIPTION
"The group of objects maintaining the Link Management Protocol (LMP)
Peer configuration for the virtual router instances on Nokia SROS
series systems for Release 13.0."
::= { tmnxLmpV13v0Groups 2 }
tmnxLmpVRtrCcGroupV13v0 OBJECT-GROUP
OBJECTS {
tmnxLmpVRtrCcTableLastChanged,
tmnxLmpVRtrCcRowStatus,
tmnxLmpVRtrCcLastChanged,
tmnxLmpVRtrCcAdminState,
tmnxLmpVRtrCcOperState,
tmnxLmpVRtrCcRemoteId,
tmnxLmpVRtrCcPeerIfAddressType,
tmnxLmpVRtrCcPeerIfAddress,
tmnxLmpVRtrCcSetupRole,
tmnxLmpVRtrCcHelloInterval,
tmnxLmpVRtrCcHelloIntvNeg,
tmnxLmpVRtrCcHelloDeadInterval,
tmnxLmpVRtrCcHelloDeadIntvNeg,
tmnxLmpVRtrCcTtl
}
STATUS current
DESCRIPTION
"The group of objects maintaining the Link Management Protocol (LMP)
Control Channel configuration for the virtual router instances on
Nokia SROS series systems for Release 13.0."
::= { tmnxLmpV13v0Groups 3 }
tmnxLmpVRtrTeLinkGroupV13v0 OBJECT-GROUP
OBJECTS {
tmnxLmpVRtrTeLinkTableLastChange,
tmnxLmpVRtrTeLinkRowStatus,
tmnxLmpVRtrTeLinkLastChanged,
tmnxLmpVRtrTeLinkAdminState,
tmnxLmpVRtrTeLinkOperState,
tmnxLmpVRtrTeLinkName,
tmnxLmpVRtrTeLinkRemoteId,
tmnxLmpVRtrTeLinkPeerNodeId
}
STATUS current
DESCRIPTION
"The group of objects maintaining the Link Management Protocol (LMP)
Traffic Engineering (TE) Links configuration for the virtual router
instances on Nokia SROS series systems for Release 13.0."
::= { tmnxLmpV13v0Groups 4 }
tmnxLmpVRtrDbLinkGroupV13v0 OBJECT-GROUP
OBJECTS {
tmnxLmpVRtrDbLinkTableLastChange,
tmnxLmpVRtrDbLinkRowStatus,
tmnxLmpVRtrDbLinkLastChanged,
tmnxLmpVRtrDbLinkAdminState,
tmnxLmpVRtrDbLinkOperState,
tmnxLmpVRtrDbLinkPortId,
tmnxLmpVRtrDbLinkRemoteId,
tmnxLmpVRtrDbLinkReasonDownFlags
}
STATUS current
DESCRIPTION
"The group of objects maintaining the Link Management Protocol (LMP)
Data Bearing (DB) Links configuration for the virtual router instances
on Nokia SROS series systems for Release 13.0."
::= { tmnxLmpV13v0Groups 5 }
tmnxLmpVRtrCcStatsGroupV13v0 OBJECT-GROUP
OBJECTS {
tmnxLmpVRtrCcInErrors,
tmnxLmpVRtrCcOutErrors,
tmnxLmpVRtrCcConfigReceived,
tmnxLmpVRtrCcConfigSent,
tmnxLmpVRtrCcConfigRetransmit,
tmnxLmpVRtrCcConfigAckReceived,
tmnxLmpVRtrCcConfigAckSent,
tmnxLmpVRtrCcConfigNackReceived,
tmnxLmpVRtrCcConfigNackSent,
tmnxLmpVRtrCcHelloReceived,
tmnxLmpVRtrCcHelloSent,
tmnxLmpVRtrCcLinkSumReceived,
tmnxLmpVRtrCcLinkSumSent,
tmnxLmpVRtrCcLinkSumRetransmit,
tmnxLmpVRtrCcLinkSumAckReceived,
tmnxLmpVRtrCcLinkSumAckSent,
tmnxLmpVRtrCcLinkSumNackReceived,
tmnxLmpVRtrCcLinkSumNackSent,
tmnxLmpVRtrCcDiscontinuityTime
}
STATUS current
DESCRIPTION
"The group of objects maintaining the Link Management Protocol (LMP)
Control Channel Statistics for the virtual router instances on Nokia
SROS series systems for Release 13.0."
::= { tmnxLmpV13v0Groups 6 }
tmnxLmpVRtrTeLinkStatsGroupV13v0 OBJECT-GROUP
OBJECTS {
tmnxLmpVRtrTeLinkSumReceived,
tmnxLmpVRtrTeLinkSumSent,
tmnxLmpVRtrTeLinkSumRetransmit,
tmnxLmpVRtrTeLinkSumAckReceived,
tmnxLmpVRtrTeLinkSumAckSent,
tmnxLmpVRtrTeLinkSumNackReceived,
tmnxLmpVRtrTeLinkSumNackSent,
tmnxLmpVRtrTeLinkDiscntnuityTime
}
STATUS current
DESCRIPTION
"The group of objects maintaining the Link Management Protocol (LMP)
Traffic Engineering (TE) Link Statistics for the virtual router
instances on Nokia SROS series systems for Release 13.0."
::= { tmnxLmpV13v0Groups 7 }
tmnxLmpVRtrNotifGroupV13v0 NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxLmpVRtrTeLinkPropMismatch,
tmnxLmpVRtrTeLinkPropMismatchClr,
tmnxLmpVRtrDbLinkPropMismatch,
tmnxLmpVRtrDbLinkPropMismatchClr,
tmnxLmpVRtrControlChannelState,
tmnxLmpVRtrTeLinkState
}
STATUS current
DESCRIPTION
"The group of notifications supporting the Link Management Protocol
(LMP) configuration for the virtual router instances on Nokia SROS
series systems for Release 13.0."
::= { tmnxLmpV13v0Groups 8 }
tmnxLmpV15v0Groups OBJECT IDENTIFIER ::= { tmnxLmpGroups 2 }
tmnxLmpVRtrPeerGroupV15v0 OBJECT-GROUP
OBJECTS {
tmnxLmpVRtrPeerCcVRtrId,
tmnxLmpVRtrPeerGmplsLpbkAddrType,
tmnxLmpVRtrPeerGmplsLpbkAddress
}
STATUS current
DESCRIPTION
"The group of additional objects maintaining the Link Management
Protocol (LMP) Peer configuration for the virtual router instances on
Nokia SROS series systems for Release 15.0."
::= { tmnxLmpV15v0Groups 1 }
tmnxLmpVRtrCtrlChannelGroupV15v0 OBJECT-GROUP
OBJECTS {
tmnxLmpVRtrCcIsTunneled
}
STATUS current
DESCRIPTION
"The group of additional objects maintaining the Link Management
Protocol (LMP) control channel configuration for virtual router
instances on Nokia SROS series systems for Release 15.0."
::= { tmnxLmpV15v0Groups 2 }
tmnxLmpNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 100 }
tmnxLmpNotification OBJECT IDENTIFIER ::= { tmnxLmpNotifyPrefix 0 }
tmnxLmpVRtrTeLinkPropMismatch NOTIFICATION-TYPE
OBJECTS {
tmnxLmpVRtrTeLinkRemoteId,
tmnxLmpVRtrTeLinkPeerNodeId
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxLmpVRtrTeLinkPropMismatch notification is generated
when a TE link property mismatch is detected on the node. This
notification is only generated the first time a mismatch is detected.
[EFFECT] The TE link is operationally down when a mismatch is
detected.
[RECOVERY] Ensure the TE link configuration between the local node and
the peer node is consistent."
::= { tmnxLmpNotification 1 }
tmnxLmpVRtrTeLinkPropMismatchClr NOTIFICATION-TYPE
OBJECTS {
tmnxLmpVRtrTeLinkRemoteId,
tmnxLmpVRtrTeLinkPeerNodeId
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxLmpVRtrTeLinkPropMismatchClr notification is generated
when a TE link property mismatch is cleared.
[EFFECT] The TE link can now service traffic.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxLmpNotification 2 }
tmnxLmpVRtrDbLinkPropMismatch NOTIFICATION-TYPE
OBJECTS {
tmnxLmpVRtrDbLinkRemoteId
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxLmpVRtrDbLinkPropMismatch notification is generated
when a DB link property mismatch is detected on the node. This
notification is only generated the first time a mismatch is detected.
[EFFECT] The DB link is operationally down when a mismatch is
detected.
[RECOVERY] Ensure the DB link configuration between the local node and
the peer node is consistent."
::= { tmnxLmpNotification 3 }
tmnxLmpVRtrDbLinkPropMismatchClr NOTIFICATION-TYPE
OBJECTS {
tmnxLmpVRtrDbLinkRemoteId
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxLmpVRtrDbLinkPropMismatchClr notification is generated
when the DB link property mismatch is cleared.
[EFFECT] The DB link can now service traffic.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxLmpNotification 4 }
tmnxLmpVRtrControlChannelState NOTIFICATION-TYPE
OBJECTS {
tmnxLmpVRtrCcOperState
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxLmpVRtrControlChannelState notification is generated
when a control channel transitions to or from the 'up (1)' operational
state.
[EFFECT] If no control channels to the peer-node are up, the related
TE links cannot be used to set up new GMPLS label-switched paths
(LSPs).
[RECOVERY] Ensure the control channel peer-interface is reachable."
::= { tmnxLmpNotification 5 }
tmnxLmpVRtrTeLinkState NOTIFICATION-TYPE
OBJECTS {
tmnxLmpVRtrTeLinkOperState
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxLmpVRtrTeLinkState notification is generated when a TE
link's operational state changes.
[EFFECT] When tmnxLmpVRtrTeLinkOperState is not 'up (1)', no new GMPLS
LSPs can be set up using this TE link.
[RECOVERY] When tmnxLmpVRtrTeLinkOperState is 'degraded (5)', bring up
at least one control channel with the relevant peer node."
::= { tmnxLmpNotification 6 }
END