WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/nokia/TIMETRA-LDP-NG-MIB

12199 lines
447 KiB
Plaintext
Raw Blame History

TIMETRA-LDP-NG-MIB DEFINITIONS ::= BEGIN
IMPORTS
InterfaceIndexOrZero
FROM IF-MIB
InetAddress, InetAddressPrefixLength,
InetAddressType, InetVersion
FROM INET-ADDRESS-MIB
MplsLsrIdentifier
FROM MPLS-LDP-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Counter32, Gauge32, Integer32,
MODULE-IDENTITY, NOTIFICATION-TYPE,
OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
DisplayString, RowStatus, TimeInterval,
TimeStamp, TruthValue
FROM SNMPv2-TC
timetraSRMIBModules, tmnxSRConfs,
tmnxSRNotifyPrefix, tmnxSRObjs
FROM TIMETRA-GLOBAL-MIB
TmnxLabelSigStatus, TmnxLabelStatus,
TmnxLdpAdjacencyType,
TmnxLdpBackoffTime, TmnxLdpFECFlags,
TmnxLdpFECPolicy,
TmnxLdpGenOperDownReasonCode,
TmnxLdpHelloFactor, TmnxLdpHelloTimeout,
TmnxLdpInLblWdrawalReasonCode,
TmnxLdpIntTargOperDownReasonCode,
TmnxLdpKeepAliveFactor,
TmnxLdpLabelDistMethod,
TmnxLdpNewHelloTimeout,
TmnxLdpNewKeepAliveTimeout, TmnxVpnId
FROM TIMETRA-LDP-MIB
SdpId, ServType,
TdmOptionsCasTrunkFraming,
TdmOptionsSigPkts
FROM TIMETRA-SERV-MIB
TNamedItem, TNamedItemOrEmpty,
TPolicyStatementNameOrEmpty,
TmnxAddressAndPrefixAddress,
TmnxAddressAndPrefixPrefix,
TmnxAddressAndPrefixType,
TmnxAdminState, TmnxCBFClasses,
TmnxEnabledDisabled, TmnxLdpFECType,
TmnxMplsLdpNgIdType,
TmnxMplsLdpNgIdentifier,
TmnxMplsLsrNgIdentifier, TmnxOperState,
TmnxServId, TmnxVRtrMplsLspID, TmnxVcId,
TmnxVcIdOrNone, TmnxVcType
FROM TIMETRA-TC-MIB
vRtrID
FROM TIMETRA-VRTR-MIB
;
timetraLdpNgMIBModule MODULE-IDENTITY
LAST-UPDATED "201701010000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"The MIB module to manage and provision the Nokia SROS LDP NG protocol
features.
Copyright 2013-2018 Nokia. All rights reserved. Reproduction of this
document is authorized on the condition that the foregoing copyright
notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "201701010000Z"
DESCRIPTION
"Rev 15.0 1 Jan 2017 00:00
15.0 release of the TIMETRA-LDP-NG-MIB."
REVISION "201601010000Z"
DESCRIPTION
"Rev 14.0 1 Jan 2016 00:00
14.0 release of the TIMETRA-LDP-NG-MIB."
REVISION "201501010000Z"
DESCRIPTION
"Rev 13.0 1 Jan 2015 00:00
13.0 release of the TIMETRA-LDP-NG-MIB."
REVISION "201402010000Z"
DESCRIPTION
"Rev 0.1 1 Feb 2014 00:00
Initial version of the TIMETRA-LDP-NG-MIB."
::= { timetraSRMIBModules 91 }
tmnxLdpNgObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 91 }
vRtrLdpNgIfTableLstChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfTableLstChanged indicates the last timestamp
when an entry in the vRtrLdpNgIfTable was last changed."
::= { tmnxLdpNgObjs 1 }
vRtrLdpNgIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgIfTable provides an entry for each virtual router
interface configured to be used with the Label Distribution Protocol
(LDP)."
::= { tmnxLdpNgObjs 2 }
vRtrLdpNgIfEntry OBJECT-TYPE
SYNTAX VRtrLdpNgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an interface on this virtual router that
participates in the LDP protocol.
Row entries can be created or deleted via SNMP SET requests. A row
with default attribute values is created by setting
vRtrLdpNgIfRowStatus to 'createAndGo'. A row entry can be destroyed by
setting vRtrLdpNgIfRowStatus to 'destroy'."
INDEX {
vRtrID,
vRtrLdpNgIfIndex
}
::= { vRtrLdpNgIfTable 1 }
VRtrLdpNgIfEntry ::= SEQUENCE
{
vRtrLdpNgIfIndex InterfaceIndexOrZero,
vRtrLdpNgIfRowStatus RowStatus,
vRtrLdpNgIfLastChange TimeStamp,
vRtrLdpNgIfAdminState TmnxAdminState,
vRtrLdpNgIfOperState TmnxOperState,
vRtrLdpNgIfOperDownReason TmnxLdpIntTargOperDownReasonCode,
vRtrLdpNgIfBfdEnabled BITS,
vRtrLdpNgIfLBWeight Unsigned32
}
vRtrLdpNgIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfIndex specifies the interface index."
::= { vRtrLdpNgIfEntry 1 }
vRtrLdpNgIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrLdpNgIfRowStatus is used to control the creation and deletion of
rows in the vRtrLdpNgIfTable.
A row can be created by setting vRtrLdpNgIfRowStatus to 'createAndGo'.
The agent should assign the default attribute values and change the
row status to 'active'.
A row entry can be destroyed by setting vRtrLdpNgIfRowStatus to
'destroy'."
::= { vRtrLdpNgIfEntry 2 }
vRtrLdpNgIfLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfLastChange indicates the sysUpTime when this
row was last modified."
::= { vRtrLdpNgIfEntry 3 }
vRtrLdpNgIfAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfAdminState specifies the desired
administrative state for LDP on this interface."
DEFVAL { inService }
::= { vRtrLdpNgIfEntry 4 }
vRtrLdpNgIfOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfOperState indicates the current operational
state of LDP of this interface"
::= { vRtrLdpNgIfEntry 5 }
vRtrLdpNgIfOperDownReason OBJECT-TYPE
SYNTAX TmnxLdpIntTargOperDownReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfOperDownReason indicates the reason that the
LDP interface is operationally down."
::= { vRtrLdpNgIfEntry 6 }
vRtrLdpNgIfBfdEnabled OBJECT-TYPE
SYNTAX BITS {
ipv4 (0),
ipv6 (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfBfdEnabled specifies whether BFD tracking is
enabled to hello adjacency source address of the peer. When multiple
links exist to the same LDP peer, a Hello adjacency is established
over each link and a separate BFD session is enabled on each LDP
interface. If there are any FEC resolved over this interface, LDP will
enable BFD tracking to each next hop.
When this object has a value of 'ipv4', BFD tracking is enabled to
each resolved ipv4 FEC next hop and or ipv4 hello adjacency over this
interface. When this object has a value of 'ipv6', BFD tracking is
enabled to each resolved ipv6 FEC next hop and or ipv6 hello adjacency
over this interface. In case FEC next hop and hello adjacency source
address of the peer is same, only one BFD session is used to track
both. When this object has value of 0, BFD tracking is disabled."
DEFVAL { {} }
::= { vRtrLdpNgIfEntry 7 }
vRtrLdpNgIfLBWeight OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrLdpNgIfLBWeight specifies an explicit
load-balancing-weight for this interface. This weight overrides IGP
route next-hop weights if configured."
DEFVAL { 0 }
::= { vRtrLdpNgIfEntry 8 }
vRtrLdpNgHelloAdjTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgHelloAdjEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgHelloAdjTable is a read-only table which has information
about Hello Adjacencies for Sessions. A hello adjacency can be
associated with an LDP interface or with a targeted peer."
::= { tmnxLdpNgObjs 3 }
vRtrLdpNgHelloAdjEntry OBJECT-TYPE
SYNTAX VRtrLdpNgHelloAdjEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a single LDP Hello Adjacency. An LDP Session can
have one or more Hello adjacencies.
vRtrLdpNgIfIndex and vRtrLdpNgPeerAddress are mutually exclusive
fields. When vRtrLdpNgIfIndex is non zero, vRtrLdpNgPeerAddressType
will have value of IPv4 and vRtrLdpNgPeerAddress will be 0.0.0.0. When
the value of vRtrLdpNgPeerAddress is non zero, vRtrLdpNgIfIndex will
be 0."
INDEX {
vRtrID,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vRtrLdpNgIfIndex,
vRtrLdpNgIfAddrType,
vRtrLdpNgPeerAddressType,
vRtrLdpNgPeerAddress
}
::= { vRtrLdpNgHelloAdjTable 1 }
VRtrLdpNgHelloAdjEntry ::= SEQUENCE
{
vRtrLdpNgPeerLdpIdType TmnxMplsLdpNgIdType,
vRtrLdpNgPeerLdpId TmnxMplsLdpNgIdentifier,
vRtrLdpNgHelloAdjLclLdpIdType TmnxMplsLdpNgIdType,
vRtrLdpNgHelloAdjLclLdpId TmnxMplsLdpNgIdentifier,
vRtrLdpNgHelloAdjEntityIndex Unsigned32,
vRtrLdpNgHelloAdjIndex Unsigned32,
vRtrLdpNgHelloAdjHoldTimeRem Unsigned32,
vRtrLdpNgHelloAdjType TmnxLdpAdjacencyType,
vRtrLdpNgHelloAdjRemConfSeqNum Unsigned32,
vRtrLdpNgHelloAdjRemIpAddrType InetAddressType,
vRtrLdpNgHelloAdjRemIpAddress InetAddress,
vRtrLdpNgHelloAdjUpTime TimeInterval,
vRtrLdpNgHelloAdjLclConfSeqNum Unsigned32,
vRtrLdpNgHelloAdjLclIpAddrType InetAddressType,
vRtrLdpNgHelloAdjLclIpAddress InetAddress,
vRtrLdpNgHelloAdjInHelloMsgCnt Counter32,
vRtrLdpNgHelloAdjOutHelloMsgCnt Counter32,
vRtrLdpNgHelloAdjLclTimeout TmnxLdpHelloTimeout,
vRtrLdpNgHelloAdjRemTimeout TmnxLdpHelloTimeout,
vRtrLdpNgHelloAdjBfdStatus INTEGER,
vRtrLdpNgHelloAdjLclIPv4P2MPCap TruthValue,
vRtrLdpNgHelloAdjRemIPv4P2MPCap TruthValue,
vRtrLdpNgHelloAdjLclIPv6P2MPCap TruthValue,
vRtrLdpNgHelloAdjRemIPv6P2MPCap TruthValue,
vRtrLdpNgHelloAdjLclIPv4PfxCap TruthValue,
vRtrLdpNgHelloAdjRemIPv4PfxCap TruthValue,
vRtrLdpNgHelloAdjLclIPv6PfxCap TruthValue,
vRtrLdpNgHelloAdjRemIPv6PfxCap TruthValue,
vRtrLdpNgHelloAdjPeerCapRecv BITS
}
vRtrLdpNgPeerLdpIdType OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object vRtrLdpNgPeerLdpIdType is an index for the row entry. It
indicates the LDP identifier type of the peer indicated by
vRtrLdpNgPeerLdpId."
::= { vRtrLdpNgHelloAdjEntry 1 }
vRtrLdpNgPeerLdpId OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdentifier (SIZE (6|18))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object vRtrLdpNgPeerLdpId is an index for the row entry. It
indicates the LDP identifier of the peer."
::= { vRtrLdpNgHelloAdjEntry 2 }
vRtrLdpNgHelloAdjLclLdpIdType OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclLdpIdType indicates the local LDP
identifier type for this specific adjacency indicated by
vRtrLdpNgHelloAdjLclLdpId ."
::= { vRtrLdpNgHelloAdjEntry 3 }
vRtrLdpNgHelloAdjLclLdpId OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdentifier (SIZE (6|18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclLdpId indicates the local LDP
identifier for this specific adjacency."
::= { vRtrLdpNgHelloAdjEntry 4 }
vRtrLdpNgHelloAdjEntityIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjEntityIndex indicates the Entity index
which is an index for MPLS-LDP-MIB::mplsLdpHelloAdjacencyEntry."
::= { vRtrLdpNgHelloAdjEntry 5 }
vRtrLdpNgHelloAdjIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjIndex indicates the Hello adjacency
index which is an index for MPLS-LDP-MIB::mplsLdpHelloAdjacencyEntry."
::= { vRtrLdpNgHelloAdjEntry 6 }
vRtrLdpNgHelloAdjHoldTimeRem OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjHoldTimeRem indicates the hold time
remaining for this Hello Adjacency. This interval will change when the
next Hello message which corresponds to this Hello Adjacency is
received."
::= { vRtrLdpNgHelloAdjEntry 7 }
vRtrLdpNgHelloAdjType OBJECT-TYPE
SYNTAX TmnxLdpAdjacencyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjType indicates the type of this Hello
Adjacency. If this value is 'link' then this adjacency is a result of
a Link Hello. If this value is 'hello', then the adjacency is a result
of a Targeted Hello."
::= { vRtrLdpNgHelloAdjEntry 8 }
vRtrLdpNgHelloAdjRemConfSeqNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjRemConfSeqNum indicates the
Configuration sequence number that was in the Hello received when this
adjacency started up. This configuration sequence number changes when
there is a change of configuration."
::= { vRtrLdpNgHelloAdjEntry 9 }
vRtrLdpNgHelloAdjRemIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjRemIpAddrType indicates the type of
address indicated by vRtrLdpNgHelloAdjRemIpAddress."
::= { vRtrLdpNgHelloAdjEntry 10 }
vRtrLdpNgHelloAdjRemIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjRemIpAddress indicates the peer IP
address of the interface/targeted session that sent hellos for this
specific adjacency."
::= { vRtrLdpNgHelloAdjEntry 11 }
vRtrLdpNgHelloAdjUpTime OBJECT-TYPE
SYNTAX TimeInterval
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjUpTime indicates the time that this
adjacency has been up."
::= { vRtrLdpNgHelloAdjEntry 12 }
vRtrLdpNgHelloAdjLclConfSeqNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclConfSeqNum indicates the
Configuration sequence number that was used in the Hello sent when
this adjacency started up. This configuration sequence number changes
when there is a change of configuration."
::= { vRtrLdpNgHelloAdjEntry 13 }
vRtrLdpNgHelloAdjLclIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclIpAddrType indicates the type of
address indicated by vRtrLdpNgHelloAdjLclIpAddress."
::= { vRtrLdpNgHelloAdjEntry 14 }
vRtrLdpNgHelloAdjLclIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclIpAddress indicates the local IP
address of the interface/targeted session used in Hellos sent for this
specific adjacency."
::= { vRtrLdpNgHelloAdjEntry 15 }
vRtrLdpNgHelloAdjInHelloMsgCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjInHelloMsgCnt indicates the number of
Hello messages that have been received for this adjacency."
::= { vRtrLdpNgHelloAdjEntry 16 }
vRtrLdpNgHelloAdjOutHelloMsgCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjOutHelloMsgCnt indicates the number of
Hello messages that have been sent for this adjacency."
::= { vRtrLdpNgHelloAdjEntry 17 }
vRtrLdpNgHelloAdjLclTimeout OBJECT-TYPE
SYNTAX TmnxLdpHelloTimeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclTimeout indicates the hello timeout
used in the Hellos sent for this specific adjacency."
::= { vRtrLdpNgHelloAdjEntry 18 }
vRtrLdpNgHelloAdjRemTimeout OBJECT-TYPE
SYNTAX TmnxLdpHelloTimeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjRemTimeout indicates the hello timeout
used by the remote end that sent Hellos for this specific adjacency."
::= { vRtrLdpNgHelloAdjEntry 19 }
vRtrLdpNgHelloAdjBfdStatus OBJECT-TYPE
SYNTAX INTEGER {
noService (1),
inService (2),
outOfService (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjBfdStatus indicates the BFD operational
status for LDP hello adjacency.
If the value of vRtrLdpNgHelloAdjBfdStatus is 'noService', BFD is not
enabled for LDP hello adjacency. If the value of the object is
'outOfService', BFD is enabled but it is down and not running. If the
value of object is 'inService', BFD is enabled and it is running."
::= { vRtrLdpNgHelloAdjEntry 20 }
vRtrLdpNgHelloAdjLclIPv4P2MPCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclIPv4P2MPCap indicates whether the
local peer supports traffic exchange for IPv4 P2MP FECs."
::= { vRtrLdpNgHelloAdjEntry 21 }
vRtrLdpNgHelloAdjRemIPv4P2MPCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjRemIPv4P2MPCap indicates whether the
remote peer supports traffic exchange for IPv4 P2MP FECs. When the
'ipv4P2MPFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv,
this will be 'true'. Otherwise, it will be value sent by the peer LSR."
::= { vRtrLdpNgHelloAdjEntry 22 }
vRtrLdpNgHelloAdjLclIPv6P2MPCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclIPv6P2MPCap indicates whether the
local peer supports traffic exchange for IPv6 P2MP FECs."
::= { vRtrLdpNgHelloAdjEntry 23 }
vRtrLdpNgHelloAdjRemIPv6P2MPCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjRemIPv6P2MPCap indicates whether the
remote peer supports traffic exchange for IPv6 P2MP FECs. When the
'ipv6P2MPFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv,
this will be 'true'. Otherwise, it will be value sent by the peer LSR."
::= { vRtrLdpNgHelloAdjEntry 24 }
vRtrLdpNgHelloAdjLclIPv4PfxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclIPv4PfxCap indicates whether the
local peer supports traffic exchange for IPv4 Prefix FECs."
::= { vRtrLdpNgHelloAdjEntry 25 }
vRtrLdpNgHelloAdjRemIPv4PfxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjRemIPv4PfxCap indicates whether the
remote peer supports traffic exchange for IPv4 Prefix FECs. When the
'ipv4PfxFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv,
this will be 'true'. Otherwise, it will be value sent by the peer LSR."
::= { vRtrLdpNgHelloAdjEntry 26 }
vRtrLdpNgHelloAdjLclIPv6PfxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjLclIPv6PfxCap indicates whether the
local peer supports traffic exchange for IPv6 Prefix FECs."
::= { vRtrLdpNgHelloAdjEntry 27 }
vRtrLdpNgHelloAdjRemIPv6PfxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjRemIPv6PfxCap indicates whether the
remote peer supports traffic exchange for IPv6 Prefix FECs. When the
'ipv6PfxFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv,
this will be 'true'. Otherwise, it will be value sent by the peer LSR."
::= { vRtrLdpNgHelloAdjEntry 28 }
vRtrLdpNgHelloAdjPeerCapRecv OBJECT-TYPE
SYNTAX BITS {
ipv4PfxFec (0),
ipv6PfxFec (1),
ipv4P2MPFec (2),
ipv6P2MPFec (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjPeerCapRecv indicates various
capabilities signaled by the peer LSR in a hello message. A particular
capability bit will be set to 1 when the peer sent capability info in
at least one of its hello message."
::= { vRtrLdpNgHelloAdjEntry 29 }
vRtrLdpNgSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgSessionTable is a read-only table which parallels the
mplsLdpSessionTable in the MPLS-LDP-MIB. The purpose of this table is
to keep information about a single session between an LDP entity and
an LDP Peer."
::= { tmnxLdpNgObjs 4 }
vRtrLdpNgSessionEntry OBJECT-TYPE
SYNTAX VRtrLdpNgSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents information about a single session
between an LDP entity and an LDP Peer."
INDEX {
vRtrID,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId
}
::= { vRtrLdpNgSessionTable 1 }
VRtrLdpNgSessionEntry ::= SEQUENCE
{
vRtrLdpNgSessLocalLdpIdType TmnxMplsLdpNgIdType,
vRtrLdpNgSessLocalLdpId TmnxMplsLdpNgIdentifier,
vRtrLdpNgSessEntityIndex Unsigned32,
vRtrLdpNgSessLabelDistMethod TmnxLdpLabelDistMethod,
vRtrLdpNgSessLoopDetectForPV INTEGER,
vRtrLdpNgSessPathVectorLimit Unsigned32,
vRtrLdpNgSessState INTEGER,
vRtrLdpNgSessAdjacencyType TmnxLdpAdjacencyType,
vRtrLdpNgSessProtocolVersion Unsigned32,
vRtrLdpNgSessLocalUdpPort Unsigned32,
vRtrLdpNgSessPeerUdpPort Unsigned32,
vRtrLdpNgSessLocalTcpPort Unsigned32,
vRtrLdpNgSessPeerTcpPort Unsigned32,
vRtrLdpNgSessLocalAddrType InetAddressType,
vRtrLdpNgSessLocalAddress InetAddress,
vRtrLdpNgSessPeerAddrType InetAddressType,
vRtrLdpNgSessPeerAddress InetAddress,
vRtrLdpNgSessKAHoldTimeRemaining TimeInterval,
vRtrLdpNgSessMaxPduLength Unsigned32,
vRtrLdpNgSessUpTime TimeInterval,
vRtrLdpNgSessLocalKATimeout TmnxLdpNewKeepAliveTimeout,
vRtrLdpNgSessPeerKATimeout TmnxLdpNewKeepAliveTimeout,
vRtrLdpNgSessAdvertise INTEGER,
vRtrLdpNgSessLclGRHelperState TruthValue,
vRtrLdpNgSessPeerGRState TruthValue,
vRtrLdpNgSessPeerNumRestart Counter32,
vRtrLdpNgSessLastRestartTime TimeStamp,
vRtrLdpNgSessLocalFtReconTime Unsigned32,
vRtrLdpNgSessPeerFtReconTime Unsigned32,
vRtrLdpNgSessLocalFtRecovTime Unsigned32,
vRtrLdpNgSessPeerFtRecovTime Unsigned32,
vRtrLdpNgSessFtReconTimeRem Unsigned32,
vRtrLdpNgSessFtRecovTimeRem Unsigned32,
vRtrLdpNgSessBfdStatus INTEGER,
vRtrLdpNgSessLocalP2MPCap TruthValue,
vRtrLdpNgSessPeerP2MPCap TruthValue,
vRtrLdpNgSessLocalMPMBBCap TruthValue,
vRtrLdpNgSessPeerMPMBBCap TruthValue,
vRtrLdpNgSessLocalDynCap TruthValue,
vRtrLdpNgSessPeerDynCap TruthValue,
vRtrLdpNgSessLocalOLoadCap TruthValue,
vRtrLdpNgSessPeerOLoadCap TruthValue,
vRtrLdpNgSessIPv4PfxFecOLoadSent TruthValue,
vRtrLdpNgSessIPv6PfxFecOLoadSent TruthValue,
vRtrLdpNgSessIPv4PfxFecOLoadRecv TruthValue,
vRtrLdpNgSessIPv6PfxFecOLoadRecv TruthValue,
vRtrLdpNgSessIPv4P2MPFecOLSent TruthValue,
vRtrLdpNgSessIPv6P2MPFecOLSent TruthValue,
vRtrLdpNgSessIPv4P2MPFecOLRecv TruthValue,
vRtrLdpNgSessIPv6P2MPFecOLRecv TruthValue,
vRtrLdpNgSessSvcFec128OLoadSent TruthValue,
vRtrLdpNgSessSvcFec128OLoadRecv TruthValue,
vRtrLdpNgSessSvcFec129OLoadSent TruthValue,
vRtrLdpNgSessSvcFec129OLoadRecv TruthValue,
vRtrLdpNgSessLocalIPv4PfxFecCap TruthValue,
vRtrLdpNgSessPeerIPv4PfxFecCap TruthValue,
vRtrLdpNgSessLocalIPv6PfxFecCap TruthValue,
vRtrLdpNgSessPeerIPv6PfxFecCap TruthValue,
vRtrLdpNgSessLocalSvcFec128Cap TruthValue,
vRtrLdpNgSessPeerSvcFec128Cap TruthValue,
vRtrLdpNgSessLocalSvcFec129Cap TruthValue,
vRtrLdpNgSessPeerSvcFec129Cap TruthValue,
vRtrLdpNgSessOperMaxFecThreshold Unsigned32,
vRtrLdpNgSessPeerCapRecv BITS,
vRtrLdpNgSessLocalUnregNotiCap TruthValue,
vRtrLdpNgSessPeerUnregNotiCap TruthValue,
vRtrLdpNgSessEndOfLibSent BITS,
vRtrLdpNgSessEndOfLibRecv BITS,
vRtrLdpNgSessCommunity TPolicyStatementNameOrEmpty,
vRtrLdpNgSessLsrIdAdvert TruthValue
}
vRtrLdpNgSessLocalLdpIdType OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalLdpIdType indicates the local LDP
identifier type for the LDP session indicated by
vRtrLdpNgSessLocalLdpId."
::= { vRtrLdpNgSessionEntry 1 }
vRtrLdpNgSessLocalLdpId OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdentifier (SIZE (6|18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalLdpId indicates the local LDP
identifier for this LDP session."
::= { vRtrLdpNgSessionEntry 2 }
vRtrLdpNgSessEntityIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessEntityIndex indicates the Entity index for
the LDP entity represented in this session."
::= { vRtrLdpNgSessionEntry 3 }
vRtrLdpNgSessLabelDistMethod OBJECT-TYPE
SYNTAX TmnxLdpLabelDistMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLabelDistMethod indicates the label
distribution method used for this LDP session."
::= { vRtrLdpNgSessionEntry 4 }
vRtrLdpNgSessLoopDetectForPV OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLoopDetectForPV indicates whether loop
detection based on path vectors is disabled or enabled for this LDP
session.
If this object has a value of disabled(0), then loop detection
is disabled. Otherwise, if this object has a value of enabled(1),
then loop detection based on path vectors is enabled."
::= { vRtrLdpNgSessionEntry 5 }
vRtrLdpNgSessPathVectorLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of vRtrLdpNgSessLoopDetectForPV for this entry is
'enabled', then the value of vRtrLdpNgSessPathVectorLimit represents
the Path Vector Limit for this LDP Session.
If the value of vRtrLdpNgSessLoopDetectForPV for this entry is
'disabled', then the value of vRtrLdpNgSessPathVectorLimit be 0
(zero)."
::= { vRtrLdpNgSessionEntry 6 }
vRtrLdpNgSessState OBJECT-TYPE
SYNTAX INTEGER {
nonexistent (1),
initialized (2),
openrec (3),
opensent (4),
operational (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessState indicates the current state of the LDP
session. All of the states 1 - 5 are based on the state machine for
session negotiation behavior."
::= { vRtrLdpNgSessionEntry 7 }
vRtrLdpNgSessAdjacencyType OBJECT-TYPE
SYNTAX TmnxLdpAdjacencyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessAdjacencyType indicates the adjacency
type(s) supporting this LDP Session."
::= { vRtrLdpNgSessionEntry 8 }
vRtrLdpNgSessProtocolVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessProtocolVersion indicates the version of the
LDP Protocol used by this session."
::= { vRtrLdpNgSessionEntry 9 }
vRtrLdpNgSessLocalUdpPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalUdpPort indicates the UDP port used
locally for LDP discovery."
::= { vRtrLdpNgSessionEntry 10 }
vRtrLdpNgSessPeerUdpPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerUdpPort indicates the UDP port used on
the remote end for LDP discovery."
::= { vRtrLdpNgSessionEntry 11 }
vRtrLdpNgSessLocalTcpPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalTcpPort indicates the TCP port used
locally for the LDP Session."
::= { vRtrLdpNgSessionEntry 12 }
vRtrLdpNgSessPeerTcpPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerTcpPort indicates the TCP port used on
the remote end for the LDP Session."
::= { vRtrLdpNgSessionEntry 13 }
vRtrLdpNgSessLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalAddrType indicates the type of address
indicated by vRtrLdpNgSessLocalAddress."
::= { vRtrLdpNgSessionEntry 14 }
vRtrLdpNgSessLocalAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalAddress indicates the IP address used
locally for the LDP Session."
::= { vRtrLdpNgSessionEntry 15 }
vRtrLdpNgSessPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerAddrType indicates the type of address
indicated by vRtrLdpNgSessPeerAddress."
::= { vRtrLdpNgSessionEntry 16 }
vRtrLdpNgSessPeerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerAddress indicates the IP address used on
the remote end for the LDP Session."
::= { vRtrLdpNgSessionEntry 17 }
vRtrLdpNgSessKAHoldTimeRemaining OBJECT-TYPE
SYNTAX TimeInterval
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessKAHoldTimeRemaining indicates the keep alive
hold time remaining for this LDP session."
::= { vRtrLdpNgSessionEntry 18 }
vRtrLdpNgSessMaxPduLength OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessMaxPduLength indicates the maximum allowable
length for LDP PDUs for this session. This value may have been
negotiated during Session Initialization."
::= { vRtrLdpNgSessionEntry 19 }
vRtrLdpNgSessUpTime OBJECT-TYPE
SYNTAX TimeInterval
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessUpTime indicates the time since the session
was established."
::= { vRtrLdpNgSessionEntry 20 }
vRtrLdpNgSessLocalKATimeout OBJECT-TYPE
SYNTAX TmnxLdpNewKeepAliveTimeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalKATimeout indicates the keepalive
timeout used locally for the LDP Session."
::= { vRtrLdpNgSessionEntry 21 }
vRtrLdpNgSessPeerKATimeout OBJECT-TYPE
SYNTAX TmnxLdpNewKeepAliveTimeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerKATimeout indicates the keepalive
timeout used at the remote end of the LDP Session."
::= { vRtrLdpNgSessionEntry 22 }
vRtrLdpNgSessAdvertise OBJECT-TYPE
SYNTAX INTEGER {
address (1),
service (2),
addressAndService (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessAdvertise indicates the type of FECs that
will be transported by the session."
::= { vRtrLdpNgSessionEntry 23 }
vRtrLdpNgSessLclGRHelperState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLclGRHelperState indicates whether the local
entity of this session is graceful restart helper capable or not."
::= { vRtrLdpNgSessionEntry 24 }
vRtrLdpNgSessPeerGRState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerGRState indicates whether the peer
entity of this session is capable of supporting graceful restart."
::= { vRtrLdpNgSessionEntry 25 }
vRtrLdpNgSessPeerNumRestart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerNumRestart indicates the number of times
graceful restart helper was initiated for this session."
::= { vRtrLdpNgSessionEntry 26 }
vRtrLdpNgSessLastRestartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLastRestartTime indicates the last time
graceful restart helper was initiated."
::= { vRtrLdpNgSessionEntry 27 }
vRtrLdpNgSessLocalFtReconTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalFtReconTime indicates the session's
local entity Fault Tolerant(FT) Reconnect Timeout."
::= { vRtrLdpNgSessionEntry 28 }
vRtrLdpNgSessPeerFtReconTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerFtReconTime indicates the session's peer
entity Fault Tolerant(FT) Reconnect Timeout."
::= { vRtrLdpNgSessionEntry 29 }
vRtrLdpNgSessLocalFtRecovTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalFtRecovTime indicates the session's
local entity Fault Tolerant(FT) recovery timeout."
::= { vRtrLdpNgSessionEntry 30 }
vRtrLdpNgSessPeerFtRecovTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerFtRecovTime indicates the session's peer
entity Fault Tolerant(FT) recovery timeout."
::= { vRtrLdpNgSessionEntry 31 }
vRtrLdpNgSessFtReconTimeRem OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessFtReconTimeRem indicates the amount of time
left before session's Fault Tolerant(FT) reconnect timeout expires.
This value is set to lesser of the neighbor advertised FT recovery
timeout, vRtrLdpNgSessPeerFtRecovTime and the local recovery timeout,
vRtrLdpNgSessLocalFtRecovTime."
::= { vRtrLdpNgSessionEntry 32 }
vRtrLdpNgSessFtRecovTimeRem OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessFtRecovTimeRem indicates the amount of time
left before session's Fault Tolerant(FT) recovery timeout expires.
This value is set to lesser of the neighbor advertised FT recovery
timeout, vRtrLdpNgSessPeerFtRecovTime and the local recovery timeout,
vRtrLdpNgSessLocalFtRecovTime."
::= { vRtrLdpNgSessionEntry 33 }
vRtrLdpNgSessBfdStatus OBJECT-TYPE
SYNTAX INTEGER {
noService (1),
inService (2),
outOfService (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessBfdStatus indicates the BFD operational
status for the LDP session.
If the value of vRtrLdpNgSessBfdStatus is 'noService', BFD is not
enabled for the LDP session. If the value of the object is
'outOfService', BFD is enabled but it is down and not running. If the
value of object is 'inService', BFD is enabled and it is running."
::= { vRtrLdpNgSessionEntry 34 }
vRtrLdpNgSessLocalP2MPCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalP2MPCap indicates whether the local
entity of this session is capable of exchanging P2MP FECs."
::= { vRtrLdpNgSessionEntry 35 }
vRtrLdpNgSessPeerP2MPCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerP2MPCap indicates whether the peer
entity of this session is capable of exchanging P2MP FECs."
::= { vRtrLdpNgSessionEntry 36 }
vRtrLdpNgSessLocalMPMBBCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalMPMBBCap indicates whether the local
entity of this session is capable of Multipoint MBB."
::= { vRtrLdpNgSessionEntry 37 }
vRtrLdpNgSessPeerMPMBBCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerMPMBBCap indicates whether the peer
entity of this session is capable of Multipoint MBB."
::= { vRtrLdpNgSessionEntry 38 }
vRtrLdpNgSessLocalDynCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalDynCap indicates whether the local
entity of this session supports negotiation of LDP session
capabilities dynamically."
::= { vRtrLdpNgSessionEntry 39 }
vRtrLdpNgSessPeerDynCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerDynCap indicates whether the peer entity
of this session supports negotiation of LDP session capabilities
dynamically."
::= { vRtrLdpNgSessionEntry 40 }
vRtrLdpNgSessLocalOLoadCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalOLoadCap indicates whether the local
entity of this session is capable of signaling LSR Overload
Notification."
::= { vRtrLdpNgSessionEntry 41 }
vRtrLdpNgSessPeerOLoadCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerOLoadCap indicates whether the peer
entity of this session is capable of signaling LSR Overload
Notification."
::= { vRtrLdpNgSessionEntry 42 }
vRtrLdpNgSessIPv4PfxFecOLoadSent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessIPv4PfxFecOLoadSent indicates whether LSR
Overload Notification has been sent to the LDP peer for IPv4 Prefix
FEC Type.
The value of 'true' indicates that Local LSR has set the LDP session
as overloaded for IPv4 Prefix FEC type and is not ready to receive new
Label Mappings for IPv4 Prefix FEC Type. In this state if a Label
Mapping Message is received from peer for any IPv4 Prefix FEC type
then the Label is returned with a Label Release Message."
::= { vRtrLdpNgSessionEntry 43 }
vRtrLdpNgSessIPv6PfxFecOLoadSent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessIPv6PfxFecOLoadSent indicates whether LSR
Overload Notification has been sent to the LDP peer for IPv6 Prefix
FEC Type.
The value of 'true' indicates that Local LSR has set the LDP session
as overloaded for IPv6 Prefix FEC type and is not ready to receive new
Label Mappings for IPv6 Prefix FEC Type. In this state if a Label
Mapping Message is received from peer for any IPv6 Prefix FEC type
then the Label is returned with a Label Release Message."
::= { vRtrLdpNgSessionEntry 44 }
vRtrLdpNgSessIPv4PfxFecOLoadRecv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessIPv4PfxFecOLoadRecv indicates whether LSR
Overload Notification has been received from the LDP peer for IPv4
Prefix FEC Type.
The value of 'true' indicates that Peer LSR has set the LDP session as
overloaded for IPv4 Prefix FEC type and is not ready to receive new
Label Mappings for any IPv4 Prefix FEC Type. In this state no new
Label Mapping Message would be sent to peer for any IPv4 Prefix FEC
Type."
::= { vRtrLdpNgSessionEntry 45 }
vRtrLdpNgSessIPv6PfxFecOLoadRecv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessIPv6PfxFecOLoadRecv indicates whether LSR
Overload Notification has been received from the LDP peer for IPv6
Prefix FEC Type.
The value of 'true' indicates that Peer LSR has set the LDP session as
overloaded for IPv6 Prefix FEC type and is not ready to receive new
Label Mappings for any IPv6 Prefix FEC Type. In this state no new
Label Mapping Message would be sent to peer for any IPv6 Prefix FEC
Type."
::= { vRtrLdpNgSessionEntry 46 }
vRtrLdpNgSessIPv4P2MPFecOLSent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessIPv4P2MPFecOLSent indicates whether LSR
Overload Notification has been sent to the LDP peer for IPv4 P2MP FEC
Type.
The value of 'true' indicates that Local LSR has set the LDP session
as overloaded for IPv4 P2MP FEC type and is not ready to receive new
Label Mappings for IPv4 P2MP FEC Type. In this state if a Label
Mapping Message is received from peer for IPv4 P2MP FEC type then the
Label is returned with a Label Release Message."
::= { vRtrLdpNgSessionEntry 47 }
vRtrLdpNgSessIPv6P2MPFecOLSent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessIPv6P2MPFecOLSent indicates whether LSR
Overload Notification has been sent to the LDP peer for IPv6 P2MP FEC
Type.
The value of 'true' indicates that Local LSR has set the LDP session
as overloaded for IPv6 P2MP FEC type and is not ready to receive new
Label Mappings for IPv6 P2MP FEC Type. In this state if a Label
Mapping Message is received from peer for IPv6 P2MP FEC type then the
Label is returned with a Label Release Message."
::= { vRtrLdpNgSessionEntry 48 }
vRtrLdpNgSessIPv4P2MPFecOLRecv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessIPv4P2MPFecOLRecv indicates whether LSR
Overload Notification has been received from the LDP peer for IPv4
P2MP FEC Type.
The value of 'true' indicates that Peer LSR has set the LDP session as
overloaded for IPv4 P2MP FEC type and is not ready to receive new
Label Mappings for IPv4 P2MP FEC Type. In this state no new Label
Mapping Message would be sent to peer for IPv4 P2MP FEC Type."
::= { vRtrLdpNgSessionEntry 49 }
vRtrLdpNgSessIPv6P2MPFecOLRecv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessIPv6P2MPFecOLRecv indicates whether LSR
Overload Notification has been received from the LDP peer for IPv6
P2MP FEC Type.
The value of 'true' indicates that Peer LSR has set the LDP session as
overloaded for IPv6 P2MP FEC type and is not ready to receive new
Label Mappings for IPv6 P2MP FEC Type. In this state no new Label
Mapping Message would be sent to peer for IPv6 P2MP FEC Type."
::= { vRtrLdpNgSessionEntry 50 }
vRtrLdpNgSessSvcFec128OLoadSent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessSvcFec128OLoadSent indicates whether LSR
Overload Notification has been sent to the LDP peer for Service FEC
128 Type.
The value of 'true' indicates that Local LSR has set the LDP session
as overloaded for Service FEC 128 type and is not ready to receive new
Label Mappings for Service FEC 128 Type. In this state if a Label
Mapping Message is received from peer for Service FEC 128 type then
the Label is returned with a Label Release Message."
::= { vRtrLdpNgSessionEntry 51 }
vRtrLdpNgSessSvcFec128OLoadRecv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessSvcFec128OLoadRecv indicates whether LSR
Overload Notification has been received from the LDP peer for Service
FEC 128 Type.
The value of 'true' indicates that Peer LSR has set the LDP session as
overloaded for Service FEC 128 type and is not ready to receive new
Label Mappings for Service FEC 128 Type. In this state no new Label
Mapping Message would be sent to peer for any Service FEC 128 Type."
::= { vRtrLdpNgSessionEntry 52 }
vRtrLdpNgSessSvcFec129OLoadSent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessSvcFec129OLoadSent indicates whether LSR
Overload Notification has been sent to the LDP peer for Service FEC
129 Type.
The value of 'true' indicates that Local LSR has set the LDP session
as overloaded for Service FEC 129 type and is not ready to receive new
Label Mappings for any Service FEC 129 Type. In this state if a Label
Mapping Message is received from peer for Service FEC 129 type then
the Label is returned with a Label Release Message."
::= { vRtrLdpNgSessionEntry 53 }
vRtrLdpNgSessSvcFec129OLoadRecv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessSvcFec129OLoadRecv indicates whether LSR
Overload Notification has been received from the LDP peer for Service
FEC 129 Type.
The value of 'true' indicates that Peer LSR has set the LDP session as
overloaded for Service FEC 129 type and is not ready to receive new
Label Mappings for any Service FEC 129 Type. In this state no new
Label Mapping Message would be sent to peer for any Service FEC 129
Type."
::= { vRtrLdpNgSessionEntry 54 }
vRtrLdpNgSessLocalIPv4PfxFecCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalIPv4PfxFecCap indicates whether the
local entity of this session is capable of exchanging IPv4 FECs."
::= { vRtrLdpNgSessionEntry 55 }
vRtrLdpNgSessPeerIPv4PfxFecCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerIPv4PfxFecCap indicates whether the
peer entity of this session is capable of exchanging IPv4 FECs.
When the 'ipv4PfxFec' bit is not set in vRtrLdpNgSessPeerCapRecv, this
will be 'true'. Otherwise, it will be the value sent by the peer LSR."
::= { vRtrLdpNgSessionEntry 56 }
vRtrLdpNgSessLocalIPv6PfxFecCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalIPv6PfxFecCap indicates whether the
local entity of this session is capable of exchanging IPv6 FECs."
::= { vRtrLdpNgSessionEntry 57 }
vRtrLdpNgSessPeerIPv6PfxFecCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerIPv6PfxFecCap indicates whether the peer
entity of this session is capable of exchanging IPv6 FECs. When the
'ipv6PfxFec' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be
'true'. Otherwise, it will be the value sent by the peer LSR."
::= { vRtrLdpNgSessionEntry 58 }
vRtrLdpNgSessLocalSvcFec128Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalSvcFec128Cap indicates whether the
local entity of this session is capable of exchanging PW ID FECs."
::= { vRtrLdpNgSessionEntry 59 }
vRtrLdpNgSessPeerSvcFec128Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerSvcFec128Cap indicates whether the peer
entity of this session is capable of exchanging PW ID FECs. When the
'fec128' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be
'true'. Otherwise, it will be the value sent by the peer LSR."
::= { vRtrLdpNgSessionEntry 60 }
vRtrLdpNgSessLocalSvcFec129Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalSvcFec129Cap indicates whether the
local entity of this session is capable of exchanging General PW ID
FECs."
::= { vRtrLdpNgSessionEntry 61 }
vRtrLdpNgSessPeerSvcFec129Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerSvcFec129Cap indicates whether the peer
entity of this session is capable of exchanging General PW ID FECs
over the session. When the 'fec129' bit is not set in
vRtrLdpNgSessPeerCapRecv, this will be 'true'. Otherwise, it will be
the value sent by the peer LSR."
::= { vRtrLdpNgSessionEntry 62 }
vRtrLdpNgSessOperMaxFecThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The value of vRtrLdpNgSessOperMaxFecThreshold indicates the
operational percentage of vRtrLdpNgSessParamMaxFec. "
::= { vRtrLdpNgSessionEntry 63 }
vRtrLdpNgSessPeerCapRecv OBJECT-TYPE
SYNTAX BITS {
ipv4PfxFec (0),
ipv6PfxFec (1),
fec128 (2),
fec129 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerCapRecv indicates various capabilities
signaled by the peer LSR. A particular capability bit will be set to 1
when there is at least one capability message sent by peer LSR for a
given capability type."
::= { vRtrLdpNgSessionEntry 64 }
vRtrLdpNgSessLocalUnregNotiCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLocalUnregNotiCap indicates whether the
local entity of this session has sent Unrecognized Notification
capability to peer."
::= { vRtrLdpNgSessionEntry 65 }
vRtrLdpNgSessPeerUnregNotiCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeerUnregNotiCap indicates whether the peer
has sent Unrecognized Notification capability."
::= { vRtrLdpNgSessionEntry 66 }
vRtrLdpNgSessEndOfLibSent OBJECT-TYPE
SYNTAX BITS {
ipv4PfxFec (0),
ipv6PfxFec (1),
ipv4p2mpFec (2),
ipv6p2mpFec (3),
fec128 (4),
fec129 (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessEndOfLibSent indicates whether end of Label
Information Base (LIB) notification has been send to the LDP peer. A
particular sent bit will be set to 1 when there is at least one LIB
notification sent to the LDP peer for a given service type."
::= { vRtrLdpNgSessionEntry 67 }
vRtrLdpNgSessEndOfLibRecv OBJECT-TYPE
SYNTAX BITS {
ipv4PfxFec (0),
ipv6PfxFec (1),
ipv4p2mpFec (2),
ipv6p2mpFec (3),
fec128 (4),
fec129 (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessEndOfLibRecv indicates whether end of Label
Information Base (LIB) notification has been received from the LDP
peer. A particular received bit will be set to 1 when there is at
least one LIB notification received from the LDP peer for a given
service type."
::= { vRtrLdpNgSessionEntry 68 }
vRtrLdpNgSessCommunity OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the FEC community data "
::= { vRtrLdpNgSessionEntry 69 }
vRtrLdpNgSessLsrIdAdvert OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessLsrIdAdvert indicates whether or not the
local router is advertising the local-lsr-id of this session as a FEC
because of adv-local-lsr-id configuration linked to this session."
::= { vRtrLdpNgSessionEntry 70 }
vRtrLdpNgTargPeerTunlLspTblLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerTunlLspTblLstCh indicates the last
timestamp when an entry in the vRtrLdpNgTargPeerTunnelLspTable was
last changed."
::= { tmnxLdpNgObjs 5 }
vRtrLdpNgTargPeerTunnelLspTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgTargPeerTunnelLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgTargPeerTunnelLspTable keeps the list of LDP-over-RSVP
LSP ids which are used for the tunneling of unicast FECs.
Each LSP ID in the list corresponds to the vRtrMplsLspIndex of the
given MPLS LSP."
::= { tmnxLdpNgObjs 6 }
vRtrLdpNgTargPeerTunnelLspEntry OBJECT-TYPE
SYNTAX VRtrLdpNgTargPeerTunnelLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table contains the LSP id information about an LDP
interface or targeted peer.
Row entry can be only created if there is corresponding targeted peer
entry in vRtrLdpNgTargPeerTable.
Row entries can be created or deleted via SNMP SET requests. A row is
created by setting vRtrLdpNgTargPeerLspRowStatus to 'createAndGo'
provided the corresponding LSP id exists as an MPLS lsp. A row entry
can be destroyed by setting vRtrLdpNgTargPeerLspRowStatus to
'destroy'."
INDEX {
vRtrID,
vRtrLdpNgPeerAddressType,
vRtrLdpNgPeerAddress,
vRtrLdpNgTargPeerLspId
}
::= { vRtrLdpNgTargPeerTunnelLspTable 1 }
VRtrLdpNgTargPeerTunnelLspEntry ::= SEQUENCE
{
vRtrLdpNgTargPeerLspId TmnxVRtrMplsLspID,
vRtrLdpNgTargPeerLspRowStatus RowStatus
}
vRtrLdpNgTargPeerLspId OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerLspId specifies the LSP id of the LSP
associated with the specified interface or targeted peer."
::= { vRtrLdpNgTargPeerTunnelLspEntry 1 }
vRtrLdpNgTargPeerLspRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrLdpNgTargPeerLspRowStatus is used to create, delete or control
entries in the vRtrLdpNgTargPeerTunnelLspTable.
An entry is created by setting vRtrLdpNgTargPeerLspRowStatus to
'createAndGo'.
An entry is deleted by setting vRtrLdpNgTargPeerLspRowStatus to
'destroy'."
::= { vRtrLdpNgTargPeerTunnelLspEntry 2 }
vRtrLdpNgSessionParamsTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionParamsTableLstCh indicates the last
timestamp when an entry in the vRtrLdpNgSessionParamsTable was last
changed."
::= { tmnxLdpNgObjs 7 }
vRtrLdpNgSessionParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgSessionParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgSessionParamsTable is used to configure parameters
applicable to an LDP session."
::= { tmnxLdpNgObjs 8 }
vRtrLdpNgSessionParamsEntry OBJECT-TYPE
SYNTAX VRtrLdpNgSessionParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an LDP session to a far end peer.
Row entries can be created or deleted via SNMP SET requests. A row
with default attribute values is created by setting
vRtrLdpNgSessParamRowStatus to 'createAndGo'. A row entry can be
destroyed by setting vRtrLdpNgSessParamRowStatus to 'destroy'."
INDEX {
vRtrID,
vRtrLdpNgPeerAddressType,
vRtrLdpNgPeerAddress
}
::= { vRtrLdpNgSessionParamsTable 1 }
VRtrLdpNgSessionParamsEntry ::= SEQUENCE
{
vRtrLdpNgSessParamRowStatus RowStatus,
vRtrLdpNgSessParamDODLblDistrib TruthValue,
vRtrLdpNgSessParamImportPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamImportPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamImportPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamImportPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamImportPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamExportPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamExportPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamExportPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamExportPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamExportPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessFec129CiscoInterop TruthValue,
vRtrLdpNgSessParamAdvAdjAddrOnly TruthValue,
vRtrLdpNgSessPeIDMacFlushInterop TruthValue,
vRtrLdpNgSessParamIPv4PfxFecCap TmnxEnabledDisabled,
vRtrLdpNgSessParamIPv6PfxFecCap TmnxEnabledDisabled,
vRtrLdpNgSessParamP2MPFecCap TmnxEnabledDisabled,
vRtrLdpNgSessParamMaxFec Unsigned32,
vRtrLdpNgSessParamMaxFecLogOnly TruthValue,
vRtrLdpNgSessParamMaxFecThold Unsigned32,
vRtrLdpNgSessParamAddrExpPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamAddrExpPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamAddrExpPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamAddrExpPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamAddrExpPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgSessParamAdvert TruthValue,
vRtrLdpNgSessParamCommunity TPolicyStatementNameOrEmpty
}
vRtrLdpNgSessParamRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrLdpNgSessParamRowStatus is used to control the creation and
deletion of rows in the vRtrLdpNgSessionParamsTable.
A row can be created by setting vRtrLdpNgSessParamRowStatus to
'createAndGo'. The agent should assign the default attribute values
and change the row status to 'active'.
A row entry can be destroyed by setting vRtrLdpNgSessParamRowStatus to
'destroy'."
::= { vRtrLdpNgSessionParamsEntry 1 }
vRtrLdpNgSessParamDODLblDistrib OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamDODLblDistrib specifies whether or not
Downstream-On-Demand (DOD) has been enabled for the LDP session. When
the value is set to 'true' DOD is enabled for the LDP session."
DEFVAL { false }
::= { vRtrLdpNgSessionParamsEntry 4 }
vRtrLdpNgSessParamImportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamImportPolicy1 specifies the first
import policy used to determine which FEC prefixes received from other
LDP and TLDP peers should be redistributed to this LDP peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 5 }
vRtrLdpNgSessParamImportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamImportPolicy2 specifies the second
import policy used to determine which FEC prefixes received from other
LDP and TLDP peers should be redistributed to this LDP peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 6 }
vRtrLdpNgSessParamImportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamImportPolicy3 specifies the third
import policy used to determine which FEC prefixes received from other
LDP and TLDP peers should be redistributed to this LDP peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 7 }
vRtrLdpNgSessParamImportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamImportPolicy4 specifies the fourth
import policy used to determine which FEC prefixes received from other
LDP and TLDP peers should be redistributed to this LDP peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 8 }
vRtrLdpNgSessParamImportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamImportPolicy5 specifies the fifth
import policy used to determine which FEC prefixes received from other
LDP and TLDP peers should be redistributed to this LDP peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 9 }
vRtrLdpNgSessParamExportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamExportPolicy1 specifies the first
export policy used to determine which FEC prefixes received from this
LDP peer should be redistributed to other LDP and TLDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 10 }
vRtrLdpNgSessParamExportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamExportPolicy2 specifies the second
export policy used to determine which FEC prefixes received from this
LDP peer should be redistributed to other LDP and TLDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 11 }
vRtrLdpNgSessParamExportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamExportPolicy3 specifies the third
export policy used to determine which FEC prefixes received from this
LDP peer should be redistributed to other LDP and TLDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 12 }
vRtrLdpNgSessParamExportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamExportPolicy4 specifies the fourth
export policy used to determine which FEC prefixes received from this
LDP peer should be redistributed to other LDP and TLDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 13 }
vRtrLdpNgSessParamExportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamExportPolicy5 specifies the fifth
export policy used to determine which FEC prefixes received from this
LDP peer should be redistributed to other LDP and TLDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 14 }
vRtrLdpNgSessFec129CiscoInterop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessFec129CiscoInterop specifies whether LDP
will provide translation between non-compliant FEC 129 formats of
Cisco.
Peer LDP sessions must be manually configured towards the
non-compliant Cisco PEs.
When the value of vRtrLdpNgSessFec129CiscoInterop is 'true', Cisco
non-compliant format will be used to send and interpret received Label
Release messages i.e. the FEC129 SAII and TAII fields will be
reversed.
When the value of vRtrLdpNgSessFec129CiscoInterop is 'false', Cisco
non-compliant format will not be used or supported."
DEFVAL { false }
::= { vRtrLdpNgSessionParamsEntry 15 }
vRtrLdpNgSessParamAdvAdjAddrOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamAdvAdjAddrOnly specifies whether to
only distribute the local addresses used by hello adjacencies with
this LDP peer.
When the value is SET to 'true', local addresses that are used by
hello adjacencies with this LDP peer are only distributed to the peer
session . When the value is SET to 'false', all known local addresses
are distributed to the peer session"
DEFVAL { false }
::= { vRtrLdpNgSessionParamsEntry 16 }
vRtrLdpNgSessPeIDMacFlushInterop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessPeIDMacFlushInterop specifies whether
LDP will react to and send the non-standard PE-ID TLV (type 0x405) in
an address withdraw message to effect 'flush-all-from-me' behavior. It
is used to provide interoperability with other vendors that use this
TLV for the MAC flush mechanism. Only FEC type 128 is currently
supported.
Peer LDP sessions must be manually configured towards the PEs
requiring support for this TLV.
When the value of vRtrLdpNgSessPeIDMacFlushInterop is set to 'true',
the receipt of an address withdraw message with empty MAC list
including the non-standard TLV will trigger 'flush-all-from-me'
behavior instead of the normal 'flush-all-but-mine'. The TLV will be
included in any forwarding towards like-configured peers.
When the value of vRtrLdpNgSessPeIDMacFlushInterop is set to 'false',
the non-standard TLV will be ignored and will not be included in any
address withdraw messages sent to the peer."
DEFVAL { false }
::= { vRtrLdpNgSessionParamsEntry 17 }
vRtrLdpNgSessParamIPv4PfxFecCap OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamIPv4PfxFecCap specifies whether IPv4
prefix FECs can be exchanged over this session"
DEFVAL { enabled }
::= { vRtrLdpNgSessionParamsEntry 18 }
vRtrLdpNgSessParamIPv6PfxFecCap OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamIPv6PfxFecCap specifies whether IPv6
prefix FECs can be exchanged over this session"
DEFVAL { enabled }
::= { vRtrLdpNgSessionParamsEntry 19 }
vRtrLdpNgSessParamP2MPFecCap OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamP2MPFecCap specifies whether P2MP FECs
can be exchanged over this session"
DEFVAL { enabled }
::= { vRtrLdpNgSessionParamsEntry 20 }
vRtrLdpNgSessParamMaxFec OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The value of vRtrLdpNgSessParamMaxFec specifies the maximum number of
FECs that will be accepted from this peer LSR.
A value of zero specifies there is no limit to the number of FECs
accepted from this peer LSR.
The vRtrLdpNgSessMaxFecThresChanged notification is sent when the
number of FECs receive from this peer LSR exceeds a percentage of this
limit as specified by vRtrLdpPeerMaxFecThreshold.
Furthermore, once the limit is exhausted, following actions are taken
if vRtrLdpNgSessParamMaxFecLogOnly has value of 'false'.
(1) If LSR Overload capability is supported, this LSR will follow the
LSR Overload procedure.
(2) If LSR Overload capability is not supported, any further Label
Mapping Message is returned with Label Release Message with LDP
status code 'No_Label_Resources'. "
DEFVAL { 0 }
::= { vRtrLdpNgSessionParamsEntry 21 }
vRtrLdpNgSessParamMaxFecLogOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The value of vRtrLdpNgSessParamMaxFecLogOnly specifies whether to only
generate vRtrLdpNgSessMaxFecThresChanged notification or take further
action when FECs received exceeds vRtrLdpNgSessParamMaxFec limit.
When this value is set to 'false', trap will be generated and one of
the following action is taken:
(1) If LSR Overload capability is supported, this LSR will follow the
LSR Overload procedure.
(2) If LSR Overload capability is not supported, any further Label
Mapping Message is returned with Label Release Message with LDP
status code 'No_Label_Resources'.
When this value is set to 'true', trap will be generated only. "
DEFVAL { false }
::= { vRtrLdpNgSessionParamsEntry 22 }
vRtrLdpNgSessParamMaxFecThold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The value of vRtrLdpNgSessParamMaxFecThold specifies a percentage of
vRtrLdpNgSessParamMaxFec. "
DEFVAL { 90 }
::= { vRtrLdpNgSessionParamsEntry 23 }
vRtrLdpNgSessParamAddrExpPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamAddrExpPolicy1 specifies the first
export policy used to determine which local addresses should be
distributed to this peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 24 }
vRtrLdpNgSessParamAddrExpPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamAddrExpPolicy2 specifies the second
export policy used to determine which local addresses should be
distributed to this peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 25 }
vRtrLdpNgSessParamAddrExpPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamAddrExpPolicy3 specifies the third
export policy used to determine which local addresses should be
distributed to this peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 26 }
vRtrLdpNgSessParamAddrExpPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamAddrExpPolicy4 specifies the fourth
export policy used to determine which local addresses should be
distributed to this peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 27 }
vRtrLdpNgSessParamAddrExpPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamAddrExpPolicy5 specifies the fifth
export policy used to determine which local addresses should be
distributed to this peer."
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 28 }
vRtrLdpNgSessParamAdvert OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamAdvert specifies whether or not
advertisement of a local-LSR ID is sent over a given session"
DEFVAL { false }
::= { vRtrLdpNgSessionParamsEntry 29 }
vRtrLdpNgSessParamCommunity OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessParamCommunity defines a community string
associated with a session to a given peer"
DEFVAL { ''H }
::= { vRtrLdpNgSessionParamsEntry 30 }
vRtrLdpNgSessionAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgSessionAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgSessionInAddrTable is a read-only table that represents
all local addresses either sent to or received from an LDP peer for a
single session between an LDP entity and an LDP Peer."
::= { tmnxLdpNgObjs 9 }
vRtrLdpNgSessionAddrEntry OBJECT-TYPE
SYNTAX VRtrLdpNgSessionAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of all local addresses sent to
or received from an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId
}
::= { vRtrLdpNgSessionAddrTable 1 }
VRtrLdpNgSessionAddrEntry ::= SEQUENCE
{
vRtrLdpNgSessAddrLclLdpIdType TmnxMplsLdpNgIdType,
vRtrLdpNgSessionAddrLocalLdpId TmnxMplsLdpNgIdentifier,
vRtrLdpNgSessionAddrNumInAddrs Unsigned32,
vRtrLdpNgSessionAddrNumOutAddrs Unsigned32
}
vRtrLdpNgSessAddrLclLdpIdType OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessAddrLclLdpIdType indicates the local LDP
identifier type for the LDP session indicated by
vRtrLdpNgSessionAddrLocalLdpId."
::= { vRtrLdpNgSessionAddrEntry 1 }
vRtrLdpNgSessionAddrLocalLdpId OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdentifier (SIZE (6|18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionAddrLocalLdpId indicates the local LDP
identifier for this LDP session."
::= { vRtrLdpNgSessionAddrEntry 2 }
vRtrLdpNgSessionAddrNumInAddrs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionAddrNumInAddrs indicates the number of
local addresses that have been received from the peer for this
session."
::= { vRtrLdpNgSessionAddrEntry 3 }
vRtrLdpNgSessionAddrNumOutAddrs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionAddrNumOutAddrs indicates the number of
local addresses that have been sent to the peer for this session."
::= { vRtrLdpNgSessionAddrEntry 4 }
vRtrLdpNgSessionInAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgSessionInAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgSessionInAddrTable is a read-only table that represents
all local addresses received from an LDP peer for a single session
between an LDP entity and an LDP Peer."
::= { tmnxLdpNgObjs 10 }
vRtrLdpNgSessionInAddrEntry OBJECT-TYPE
SYNTAX VRtrLdpNgSessionInAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a local address received from
an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vRtrLdpNgSessionInAddrAddrType,
vRtrLdpNgSessionInAddrAddress
}
::= { vRtrLdpNgSessionInAddrTable 1 }
VRtrLdpNgSessionInAddrEntry ::= SEQUENCE
{
vRtrLdpNgSessionInAddrAddrType InetAddressType,
vRtrLdpNgSessionInAddrAddress InetAddress,
vRtrLdpNgSessInAddrLclLdpIdType TmnxMplsLdpNgIdType,
vRtrLdpNgSessionInAddrLocalLdpId TmnxMplsLdpNgIdentifier
}
vRtrLdpNgSessionInAddrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionInAddrAddrType indicates the address type
of vRtrLdpNgSessionInAddrAddress."
::= { vRtrLdpNgSessionInAddrEntry 1 }
vRtrLdpNgSessionInAddrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionInAddrAddress indicates the IP address
received from the peer for this LDP session."
::= { vRtrLdpNgSessionInAddrEntry 2 }
vRtrLdpNgSessInAddrLclLdpIdType OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessInAddrLclLdpIdType indicates the local LDP
identifier type for the LDP session indicated by
vRtrLdpNgSessionInAddrLocalLdpId."
::= { vRtrLdpNgSessionInAddrEntry 3 }
vRtrLdpNgSessionInAddrLocalLdpId OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdentifier (SIZE (6|18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionInAddrLocalLdpId indicates the local LDP
identifier for this LDP session."
::= { vRtrLdpNgSessionInAddrEntry 4 }
vRtrLdpNgSessionOutAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgSessionOutAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgSessionOutAddrTable is a read-only table that represents
all local addresses sent to an LDP peer for a single session between
an LDP entity and an LDP Peer."
::= { tmnxLdpNgObjs 11 }
vRtrLdpNgSessionOutAddrEntry OBJECT-TYPE
SYNTAX VRtrLdpNgSessionOutAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a local address sent to an
LDP peer."
INDEX {
vRtrID,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vRtrLdpNgSessionOutAddrAddrType,
vRtrLdpNgSessionOutAddrAddress
}
::= { vRtrLdpNgSessionOutAddrTable 1 }
VRtrLdpNgSessionOutAddrEntry ::= SEQUENCE
{
vRtrLdpNgSessionOutAddrAddrType InetAddressType,
vRtrLdpNgSessionOutAddrAddress InetAddress,
vRtrLdpNgSessOutAddrLclLdpIdType TmnxMplsLdpNgIdType,
vRtrLdpNgSessionOutAddrLclLdpId TmnxMplsLdpNgIdentifier
}
vRtrLdpNgSessionOutAddrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionOutAddrAddrType indicates the address
type of vRtrLdpNgSessionOutAddrAddress."
::= { vRtrLdpNgSessionOutAddrEntry 1 }
vRtrLdpNgSessionOutAddrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionOutAddrAddress indicates the IP address
sent to the peer for this LDP session."
::= { vRtrLdpNgSessionOutAddrEntry 2 }
vRtrLdpNgSessOutAddrLclLdpIdType OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessOutAddrLclLdpIdType indicates the local LDP
identifier type for the LDP session, indicated by
vRtrLdpNgSessionOutAddrLclLdpId."
::= { vRtrLdpNgSessionOutAddrEntry 3 }
vRtrLdpNgSessionOutAddrLclLdpId OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdentifier (SIZE (6|18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessionOutAddrLclLdpId indicates the local LDP
identifier for this LDP session."
::= { vRtrLdpNgSessionOutAddrEntry 4 }
vRtrLdpNgAddrFecTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgAddrFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgAddrFecTable is a read-only table that represents all
address FECs either sent to or received from an LDP peer known to the
Virtual Router."
::= { tmnxLdpNgObjs 12 }
vRtrLdpNgAddrFecEntry OBJECT-TYPE
SYNTAX VRtrLdpNgAddrFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of an address FEC sent to or
received from an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgAddrFecFecType,
vRtrLdpNgAddrFecIpPrefixType,
vRtrLdpNgAddrFecIpPrefix,
vRtrLdpNgAddrFecIpPrefixLen,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId
}
::= { vRtrLdpNgAddrFecTable 1 }
VRtrLdpNgAddrFecEntry ::= SEQUENCE
{
vRtrLdpNgAddrFecFecType TmnxLdpFECType,
vRtrLdpNgAddrFecIpPrefixType InetAddressType,
vRtrLdpNgAddrFecIpPrefix InetAddress,
vRtrLdpNgAddrFecIpPrefixLen InetAddressPrefixLength,
vRtrLdpNgAddrFecFlags TmnxLdpFECFlags,
vRtrLdpNgAddrFecNumInLabels Unsigned32,
vRtrLdpNgAddrFecNumOutLabels Unsigned32,
vRtrLdpNgAddrFecCommunity TPolicyStatementNameOrEmpty
}
vRtrLdpNgAddrFecFecType OBJECT-TYPE
SYNTAX TmnxLdpFECType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecFecType specifies the FEC type."
::= { vRtrLdpNgAddrFecEntry 1 }
vRtrLdpNgAddrFecIpPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecIpPrefixType indicates the address type
of vRtrLdpNgAddrFecIpPrefix."
::= { vRtrLdpNgAddrFecEntry 2 }
vRtrLdpNgAddrFecIpPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecIpPrefix specifies the IP Address Prefix
for this address FEC."
::= { vRtrLdpNgAddrFecEntry 3 }
vRtrLdpNgAddrFecIpPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecIpPrefixLen indicates the prefix length
of the subnet associated with vRtrLdpNgAddrFecIpPrefix."
::= { vRtrLdpNgAddrFecEntry 4 }
vRtrLdpNgAddrFecFlags OBJECT-TYPE
SYNTAX TmnxLdpFECFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit flags of vRtrLdpNgAddrFecFlags indicate the characteristics of
the FEC."
::= { vRtrLdpNgAddrFecEntry 5 }
vRtrLdpNgAddrFecNumInLabels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecNumInLabels indicates the number of
labels that have been sent to the peer associated with this FEC."
::= { vRtrLdpNgAddrFecEntry 6 }
vRtrLdpNgAddrFecNumOutLabels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecNumOutLabels indicates the number of
labels that have been received from the peer associated with this FEC."
::= { vRtrLdpNgAddrFecEntry 7 }
vRtrLdpNgAddrFecCommunity OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the community value for a FEC "
::= { vRtrLdpNgAddrFecEntry 8 }
vRtrLdpNgAddrFecInLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgAddrFecInLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgAddrFecInLblTable is a read-only table that represents
all address FECs received from an LDP peer known to the Virtual
Router."
::= { tmnxLdpNgObjs 13 }
vRtrLdpNgAddrFecInLblEntry OBJECT-TYPE
SYNTAX VRtrLdpNgAddrFecInLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of an address FEC received from
an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgAddrFecFecType,
vRtrLdpNgAddrFecIpPrefixType,
vRtrLdpNgAddrFecIpPrefix,
vRtrLdpNgAddrFecIpPrefixLen,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vRtrLdpNgAddrFecInLblId
}
::= { vRtrLdpNgAddrFecInLblTable 1 }
VRtrLdpNgAddrFecInLblEntry ::= SEQUENCE
{
vRtrLdpNgAddrFecInLblId Unsigned32,
vRtrLdpNgAddrFecInLbl Unsigned32,
vRtrLdpNgAddrFecInLblStatus TmnxLabelStatus,
vRtrLdpNgAddrFecInLblIfIndex InterfaceIndexOrZero
}
vRtrLdpNgAddrFecInLblId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecInLblId indicates the label number of the
ingress label exchanged."
::= { vRtrLdpNgAddrFecInLblEntry 1 }
vRtrLdpNgAddrFecInLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecInLbl indicates the ingress label
exchanged."
::= { vRtrLdpNgAddrFecInLblEntry 2 }
vRtrLdpNgAddrFecInLblStatus OBJECT-TYPE
SYNTAX TmnxLabelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecInLblStatus indicates the status of the
ingress label."
::= { vRtrLdpNgAddrFecInLblEntry 3 }
vRtrLdpNgAddrFecInLblIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecInLblIfIndex indicates the interface
index for ingress label."
::= { vRtrLdpNgAddrFecInLblEntry 4 }
vRtrLdpNgAddrFecOutLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgAddrFecOutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgAddrFecOutLblTable is a read-only table that represents
all address FECs sent to an LDP peer known to the Virtual Router."
::= { tmnxLdpNgObjs 14 }
vRtrLdpNgAddrFecOutLblEntry OBJECT-TYPE
SYNTAX VRtrLdpNgAddrFecOutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of an address FEC received from
an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgAddrFecFecType,
vRtrLdpNgAddrFecIpPrefixType,
vRtrLdpNgAddrFecIpPrefix,
vRtrLdpNgAddrFecIpPrefixLen,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vRtrLdpNgAddrFecOutLblId
}
::= { vRtrLdpNgAddrFecOutLblTable 1 }
VRtrLdpNgAddrFecOutLblEntry ::= SEQUENCE
{
vRtrLdpNgAddrFecOutLblId Unsigned32,
vRtrLdpNgAddrFecOutLbl Unsigned32,
vRtrLdpNgAddrFecOutLblStatus TmnxLabelStatus,
vRtrLdpNgAddrFecOutLblIfIndex InterfaceIndexOrZero,
vRtrLdpNgAddrFecOutLblNHType InetAddressType,
vRtrLdpNgAddrFecOutLblNHAddr InetAddress,
vRtrLdpNgAddrFecOutLblMetric Unsigned32,
vRtrLdpNgAddrFecOutLblMtu Unsigned32,
vRtrLdpNgAddrFecOutLblLspId Unsigned32
}
vRtrLdpNgAddrFecOutLblId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecOutLblId indicates the label number of
the egress label exchanged."
::= { vRtrLdpNgAddrFecOutLblEntry 1 }
vRtrLdpNgAddrFecOutLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecOutLbl indicates the egress label
exchanged"
::= { vRtrLdpNgAddrFecOutLblEntry 2 }
vRtrLdpNgAddrFecOutLblStatus OBJECT-TYPE
SYNTAX TmnxLabelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecOutLblStatus indicates the status of the
egress label."
::= { vRtrLdpNgAddrFecOutLblEntry 3 }
vRtrLdpNgAddrFecOutLblIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecOutLblIfIndex indicates the interface
index for egress label."
::= { vRtrLdpNgAddrFecOutLblEntry 4 }
vRtrLdpNgAddrFecOutLblNHType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecOutLblNHType indicates the address type
of vRtrLdpNgAddrFecOutLblNHAddr."
::= { vRtrLdpNgAddrFecOutLblEntry 5 }
vRtrLdpNgAddrFecOutLblNHAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecOutLblNHAddr indicates the IP address of
the next hop for egress label."
::= { vRtrLdpNgAddrFecOutLblEntry 6 }
vRtrLdpNgAddrFecOutLblMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecOutLblMetric indicates the relative cost
of the tunnel represented by this address FEC egress label."
::= { vRtrLdpNgAddrFecOutLblEntry 7 }
vRtrLdpNgAddrFecOutLblMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecOutLblMtu indicates the maximum transfer
unit for payloads represented by this address FEC egress label."
::= { vRtrLdpNgAddrFecOutLblEntry 8 }
vRtrLdpNgAddrFecOutLblLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecOutLblLspId indicates the LSP id
associated with egress label."
::= { vRtrLdpNgAddrFecOutLblEntry 9 }
vRtrLdpNgAddrFecMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgAddrFecMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgAddrFecMapTable is a read-only table which maps to the
vRtrLdpNgAddrFecTable. This table has the same indexes as the
vRtrLdpNgAddrFecTable but the order in which these indexes are
specified is different for the two tables."
::= { tmnxLdpNgObjs 15 }
vRtrLdpNgAddrFecMapEntry OBJECT-TYPE
SYNTAX VRtrLdpNgAddrFecMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of an address FEC sent to or
received from an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vRtrLdpNgAddrFecFecType,
vRtrLdpNgAddrFecIpPrefixType,
vRtrLdpNgAddrFecIpPrefix,
vRtrLdpNgAddrFecIpPrefixLen
}
::= { vRtrLdpNgAddrFecMapTable 1 }
VRtrLdpNgAddrFecMapEntry ::= SEQUENCE
{
vRtrLdpNgAddrFecMapFlags TmnxLdpFECFlags,
vRtrLdpNgAddrFecMapNumInLabels Unsigned32,
vRtrLdpNgAddrFecMapNumOutLabels Unsigned32
}
vRtrLdpNgAddrFecMapFlags OBJECT-TYPE
SYNTAX TmnxLdpFECFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit flags of vRtrLdpNgAddrFecMapFlags indicate the characteristics
of the FEC."
::= { vRtrLdpNgAddrFecMapEntry 1 }
vRtrLdpNgAddrFecMapNumInLabels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecMapNumInLabels indicates the number of
labels that have been sent to the peer associated with this FEC."
::= { vRtrLdpNgAddrFecMapEntry 2 }
vRtrLdpNgAddrFecMapNumOutLabels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAddrFecMapNumOutLabels indicates the number of
labels that have been received from the peer associated with this FEC."
::= { vRtrLdpNgAddrFecMapEntry 3 }
vRtrLdpNgExtP2MPFecTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgExtP2MPFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgExtP2MPFecTable is a read-only table that represents
operational information of P2MP FECs either sent to or received from
an LDP peer known to the Virtual Router."
::= { tmnxLdpNgObjs 16 }
vRtrLdpNgExtP2MPFecEntry OBJECT-TYPE
SYNTAX VRtrLdpNgExtP2MPFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of operational information of a
P2MP FEC sent to or received from an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgExtP2MPFecRootAddrType,
vRtrLdpNgExtP2MPFecRootAddress,
vRtrLdpNgExtP2MPFecOpaqueType,
vRtrLdpNgExtP2MPFecOpaqueLength,
vRtrLdpNgExtP2MPFecOpaqueValue,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId
}
::= { vRtrLdpNgExtP2MPFecTable 1 }
VRtrLdpNgExtP2MPFecEntry ::= SEQUENCE
{
vRtrLdpNgExtP2MPFecOpaqueType Unsigned32,
vRtrLdpNgExtP2MPFecOpaqueLength Unsigned32,
vRtrLdpNgExtP2MPFecOpaqueValue OCTET STRING,
vRtrLdpNgExtP2MPFecRootAddrType InetAddressType,
vRtrLdpNgExtP2MPFecRootAddress InetAddress,
vRtrLdpNgExtP2MPFecFlags TmnxLdpFECFlags,
vRtrLdpNgExtP2MPFecNumInLabels Gauge32,
vRtrLdpNgExtP2MPFecNumOutLabels Gauge32,
vRtrLdpNgExtP2MPFecTunnelIfId Unsigned32,
vRtrLdpNgExtP2MPFecMetric Unsigned32,
vRtrLdpNgExtP2MPFecMTU Unsigned32
}
vRtrLdpNgExtP2MPFecOpaqueType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOpaqueType indicates the type of a
Multi-Point Opaque Value Element."
::= { vRtrLdpNgExtP2MPFecEntry 1 }
vRtrLdpNgExtP2MPFecOpaqueLength OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOpaqueLength indicates the length of a
Multi-Point Opaque Value Element."
::= { vRtrLdpNgExtP2MPFecEntry 2 }
vRtrLdpNgExtP2MPFecOpaqueValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..74))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOpaqueValue indicates the value of a
Multi-Point Opaque Value Element."
::= { vRtrLdpNgExtP2MPFecEntry 3 }
vRtrLdpNgExtP2MPFecRootAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecRootAddrType indicates the type of ip
address of the root for this P2MP FEC."
::= { vRtrLdpNgExtP2MPFecEntry 4 }
vRtrLdpNgExtP2MPFecRootAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecRootAddress indicates the ip address
of the root for this P2MP FEC."
::= { vRtrLdpNgExtP2MPFecEntry 5 }
vRtrLdpNgExtP2MPFecFlags OBJECT-TYPE
SYNTAX TmnxLdpFECFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit flags of vRtrLdpNgExtP2MPFecFlags indicates the
characteristics of the FEC."
::= { vRtrLdpNgExtP2MPFecEntry 6 }
vRtrLdpNgExtP2MPFecNumInLabels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecNumInLabels indicates the number of
labels that have been sent to the peer associated with this FEC."
::= { vRtrLdpNgExtP2MPFecEntry 7 }
vRtrLdpNgExtP2MPFecNumOutLabels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecNumOutLabels indicates the number of
labels that have been received from the peer associated with this FEC."
::= { vRtrLdpNgExtP2MPFecEntry 8 }
vRtrLdpNgExtP2MPFecTunnelIfId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecTunnelIfId indicates the tunnel
interface identifier for this P2MP FEC."
::= { vRtrLdpNgExtP2MPFecEntry 9 }
vRtrLdpNgExtP2MPFecMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecMetric indicates the relative cost of
the tunnel represented by this P2MP FEC"
::= { vRtrLdpNgExtP2MPFecEntry 10 }
vRtrLdpNgExtP2MPFecMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecMTU indicates the maximum transfer
unit for payloads represented by this P2MP FEC"
::= { vRtrLdpNgExtP2MPFecEntry 11 }
vRtrLdpNgExtP2MPFecInLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgExtP2MPFecInLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgExtP2MPFecInLblTable is a read-only table that represents
all P2MP FECs received from an LDP peer known to the virtual router."
::= { tmnxLdpNgObjs 17 }
vRtrLdpNgExtP2MPFecInLblEntry OBJECT-TYPE
SYNTAX VRtrLdpNgExtP2MPFecInLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a P2MP FEC received from an
LDP peer."
INDEX {
vRtrID,
vRtrLdpNgExtP2MPFecRootAddrType,
vRtrLdpNgExtP2MPFecRootAddress,
vRtrLdpNgExtP2MPFecOpaqueType,
vRtrLdpNgExtP2MPFecOpaqueLength,
vRtrLdpNgExtP2MPFecOpaqueValue,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vRtrLdpNgExtP2MPFecInLblId
}
::= { vRtrLdpNgExtP2MPFecInLblTable 1 }
VRtrLdpNgExtP2MPFecInLblEntry ::= SEQUENCE
{
vRtrLdpNgExtP2MPFecInLblId Unsigned32,
vRtrLdpNgExtP2MPFecInLbl Unsigned32,
vRtrLdpNgExtP2MPFecInLblStatus TmnxLabelStatus
}
vRtrLdpNgExtP2MPFecInLblId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecInLblId indicates the label number of
the ingress label exchanged."
::= { vRtrLdpNgExtP2MPFecInLblEntry 1 }
vRtrLdpNgExtP2MPFecInLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecInLbl indicates the ingress label
exchanged."
::= { vRtrLdpNgExtP2MPFecInLblEntry 2 }
vRtrLdpNgExtP2MPFecInLblStatus OBJECT-TYPE
SYNTAX TmnxLabelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecInLblStatus indicates the status of
the ingress label."
::= { vRtrLdpNgExtP2MPFecInLblEntry 3 }
vRtrLdpNgExtP2MPFecOutLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgExtP2MPFecOutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgExtP2MPFecTable is a read-only table that represents all
P2MP FECs sent to an LDP peer known to the Virtual Router."
::= { tmnxLdpNgObjs 18 }
vRtrLdpNgExtP2MPFecOutLblEntry OBJECT-TYPE
SYNTAX VRtrLdpNgExtP2MPFecOutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a P2MP FEC sent to a LDP
peer."
INDEX {
vRtrID,
vRtrLdpNgExtP2MPFecRootAddrType,
vRtrLdpNgExtP2MPFecRootAddress,
vRtrLdpNgExtP2MPFecOpaqueType,
vRtrLdpNgExtP2MPFecOpaqueLength,
vRtrLdpNgExtP2MPFecOpaqueValue,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vRtrLdpNgExtP2MPFecOutLblId
}
::= { vRtrLdpNgExtP2MPFecOutLblTable 1 }
VRtrLdpNgExtP2MPFecOutLblEntry ::= SEQUENCE
{
vRtrLdpNgExtP2MPFecOutLblId Unsigned32,
vRtrLdpNgExtP2MPFecOutLbl Unsigned32,
vRtrLdpNgExtP2MPFecOutLblStatus TmnxLabelStatus,
vRtrLdpNgExtP2MPFecOutLblNHType InetAddressType,
vRtrLdpNgExtP2MPFecOutLblNHAdr InetAddress,
vRtrLdpNgExtP2MPFecOutLblIfIndex InterfaceIndexOrZero,
vRtrLdpNgExtP2MPFecOutLblLspId Unsigned32
}
vRtrLdpNgExtP2MPFecOutLblId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOutLblId indicates the label number of
the egress label exchanged."
::= { vRtrLdpNgExtP2MPFecOutLblEntry 1 }
vRtrLdpNgExtP2MPFecOutLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOutLbl indicates the egress label
exchanged."
::= { vRtrLdpNgExtP2MPFecOutLblEntry 2 }
vRtrLdpNgExtP2MPFecOutLblStatus OBJECT-TYPE
SYNTAX TmnxLabelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOutLblStatus indicates the status of
the egress label."
::= { vRtrLdpNgExtP2MPFecOutLblEntry 3 }
vRtrLdpNgExtP2MPFecOutLblNHType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOutLblNHType indicates the address
type of vRtrLdpNgExtP2MPFecOutLblNHAdr."
::= { vRtrLdpNgExtP2MPFecOutLblEntry 4 }
vRtrLdpNgExtP2MPFecOutLblNHAdr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOutLblNHAdr indicates the IP address
of the next hop for egress label."
::= { vRtrLdpNgExtP2MPFecOutLblEntry 5 }
vRtrLdpNgExtP2MPFecOutLblIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOutLblIfIndex indicates the interface
index for egress label."
::= { vRtrLdpNgExtP2MPFecOutLblEntry 6 }
vRtrLdpNgExtP2MPFecOutLblLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecOutLblLspId indicates the LSP id
associated with egress label."
::= { vRtrLdpNgExtP2MPFecOutLblEntry 7 }
vRtrLdpNgExtP2MPFecMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgExtP2MPFecMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgExtP2MPFecMapTable is a read-only table which maps to the
vRtrLdpNgExtP2MPFecTable. This table has the same indexes as the
vRtrLdpNgExtP2MPFecTable but the order in which these indexes are
specified is different for the two tables."
::= { tmnxLdpNgObjs 19 }
vRtrLdpNgExtP2MPFecMapEntry OBJECT-TYPE
SYNTAX VRtrLdpNgExtP2MPFecMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a P2MP FEC sent to or
received from an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vRtrLdpNgExtP2MPFecRootAddrType,
vRtrLdpNgExtP2MPFecRootAddress,
vRtrLdpNgExtP2MPFecOpaqueType,
vRtrLdpNgExtP2MPFecOpaqueLength,
vRtrLdpNgExtP2MPFecOpaqueValue
}
::= { vRtrLdpNgExtP2MPFecMapTable 1 }
VRtrLdpNgExtP2MPFecMapEntry ::= SEQUENCE
{
vRtrLdpNgExtP2MPFecMapFlags TmnxLdpFECFlags,
vRtrLdpNgExtP2MPFecMapNumInLbls Gauge32,
vRtrLdpNgExtP2MPFecMapNumOutLbls Gauge32,
vRtrLdpNgExtP2MPFecMapTunnelIfId Unsigned32,
vRtrLdpNgExtP2MPFecMapMetric Unsigned32,
vRtrLdpNgExtP2MPFecMapMTU Unsigned32
}
vRtrLdpNgExtP2MPFecMapFlags OBJECT-TYPE
SYNTAX TmnxLdpFECFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit flags of vRtrLdpNgExtP2MPFecMapFlags indicates the
characteristics of the FEC."
::= { vRtrLdpNgExtP2MPFecMapEntry 1 }
vRtrLdpNgExtP2MPFecMapNumInLbls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecMapNumInLbls indicates the number of
labels that have been sent to the peer associated with this FEC."
::= { vRtrLdpNgExtP2MPFecMapEntry 2 }
vRtrLdpNgExtP2MPFecMapNumOutLbls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecMapNumOutLbls indicates the number of
labels that have been received from the peer associated with this FEC."
::= { vRtrLdpNgExtP2MPFecMapEntry 3 }
vRtrLdpNgExtP2MPFecMapTunnelIfId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecMapTunnelIfId indicates the tunnel
interface identifier for this P2MP FEC."
::= { vRtrLdpNgExtP2MPFecMapEntry 4 }
vRtrLdpNgExtP2MPFecMapMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecMapMetric indicates the relative cost
of the tunnel represented by this P2MP FEC"
::= { vRtrLdpNgExtP2MPFecMapEntry 5 }
vRtrLdpNgExtP2MPFecMapMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgExtP2MPFecMapMTU indicates the maximum transfer
unit for payloads represented by this P2MP FEC"
::= { vRtrLdpNgExtP2MPFecMapEntry 6 }
vRtrLdpNgInetIfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgInetIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgInetIfStatsTable is a read-only table. The purpose of
this table is to keep statistical information about the LDP Interfaces
for given Inet address family on this LSR.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vRtrLdpNgInetIfTable, and the augmenting
table, vRtrLdpNgInetIfStatsTable. This in effect extends the
vRtrLdpNgInetIfTable with additional columns. Creation or deletion of
a row in the vRtrLdpNgInetIfTable results in the same fate for the row
in the vRtrLdpNgInetIfStatsTable."
::= { tmnxLdpNgObjs 20 }
vRtrLdpNgInetIfStatsEntry OBJECT-TYPE
SYNTAX VRtrLdpNgInetIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table contains statistical information about an LDP
Interface for given Inet address family.
Some counters contained in a row are for fatal errors received
during a former LDP Session associated with this entry. For example,
an LDP Pdu received on a TCP connection during an LDP Session
contains a fatal error. That error is counted here, because the
session is terminated.
If the error is NOT fatal (i.e. and the Session remains), then the
error is counted in the vRtrLdpNgSessionStatsEntry."
AUGMENTS { vRtrLdpNgInetIfEntry }
::= { vRtrLdpNgInetIfStatsTable 1 }
VRtrLdpNgInetIfStatsEntry ::= SEQUENCE
{
vRtrLdpNgInetIfStatsExistingAdj Gauge32,
vRtrLdpNgInetIfStatsHelloRecv Gauge32,
vRtrLdpNgInetIfStatsHelloSent Gauge32,
vRtrLdpNgInetIfStatsBadPduLen Gauge32,
vRtrLdpNgInetIfStatsBadMsgLen Gauge32,
vRtrLdpNgInetIfStatsMalformedTlv Gauge32,
vRtrLdpNgInetIfStatsBadProtoVer Gauge32
}
vRtrLdpNgInetIfStatsExistingAdj OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfStatsExistingAdj indicates a count of the
total active adjacencies on this LDP interface for given Inet address
family."
::= { vRtrLdpNgInetIfStatsEntry 1 }
vRtrLdpNgInetIfStatsHelloRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfStatsHelloRecv indicates number of Hello
messages received with this LDP interface."
::= { vRtrLdpNgInetIfStatsEntry 2 }
vRtrLdpNgInetIfStatsHelloSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfStatsHelloSent indicates the number of
Hello messages sent with this LDP interface."
::= { vRtrLdpNgInetIfStatsEntry 3 }
vRtrLdpNgInetIfStatsBadPduLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfStatsBadPduLen indicates the number of bad
PDU length errors detected with this LDP interface."
::= { vRtrLdpNgInetIfStatsEntry 4 }
vRtrLdpNgInetIfStatsBadMsgLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfStatsBadMsgLen indicates the number of bad
message length errors detected with this LDP interface."
::= { vRtrLdpNgInetIfStatsEntry 5 }
vRtrLdpNgInetIfStatsMalformedTlv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfStatsMalformedTlv indicates the number of
malformed TLV value errors detected with this LDP interface."
::= { vRtrLdpNgInetIfStatsEntry 6 }
vRtrLdpNgInetIfStatsBadProtoVer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfStatsBadProtoVer indicates the number of
bad protocol version errors detected with this LDP interface."
::= { vRtrLdpNgInetIfStatsEntry 7 }
vRtrLdpNgSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgSessionStatsTable is a read-only table. The purpose of
this table is to keep statistical information about a single session
between an LDP entity and an LDP Peer.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vRtrLdpNgSessionTable, and the augmenting
table, vRtrLdpNgSessionStatsTable. This in effect extends the
vRtrLdpNgSessionTable with additional columns. Creation or deletion of
a row in the vRtrLdpNgSessionTable results in the same fate for the
row in the vRtrLdpNgSessionStatsTable."
::= { tmnxLdpNgObjs 21 }
vRtrLdpNgSessionStatsEntry OBJECT-TYPE
SYNTAX VRtrLdpNgSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents statistical information about a single
session between an LDP entity and an LDP Peer."
AUGMENTS { vRtrLdpNgSessionEntry }
::= { vRtrLdpNgSessionStatsTable 1 }
VRtrLdpNgSessionStatsEntry ::= SEQUENCE
{
vRtrLdpNgSessStatsTargAdj Gauge32,
vRtrLdpNgSessStatsLinkAdj Gauge32,
vRtrLdpNgSessStatsHelloIn Counter32,
vRtrLdpNgSessStatsHelloOut Counter32,
vRtrLdpNgSessStatsKeepaliveIn Counter32,
vRtrLdpNgSessStatsKeepaliveOut Counter32,
vRtrLdpNgSessStatsInitIn Counter32,
vRtrLdpNgSessStatsInitOut Counter32,
vRtrLdpNgSessStatsLblMappingIn Counter32,
vRtrLdpNgSessStatsLblMappingOut Counter32,
vRtrLdpNgSessStatsLblRequestIn Counter32,
vRtrLdpNgSessStatsLblRequestOut Counter32,
vRtrLdpNgSessStatsLblReleaseIn Counter32,
vRtrLdpNgSessStatsLblReleaseOut Counter32,
vRtrLdpNgSessStatsLblWithdrawIn Counter32,
vRtrLdpNgSessStatsLblWithdrawOut Counter32,
vRtrLdpNgSessStatsLblAbortIn Counter32,
vRtrLdpNgSessStatsLblAbortOut Counter32,
vRtrLdpNgSessStatsAddrIn Counter32,
vRtrLdpNgSessStatsAddrOut Counter32,
vRtrLdpNgSessStatsAddrWithdrIn Counter32,
vRtrLdpNgSessStatsAddrWithdrOut Counter32,
vRtrLdpNgSessStatsNotifIn Counter32,
vRtrLdpNgSessStatsNotifOut Counter32,
vRtrLdpNgSessStatsIPv4PfxFecRcv Counter32,
vRtrLdpNgSessStatsIPv6PfxFecRcv Counter32,
vRtrLdpNgSessStatsIPv4PfxFecSnt Counter32,
vRtrLdpNgSessStatsIPv6PfxFecSnt Counter32,
vRtrLdpNgSessStatsIPv4P2MPFecRcv Counter32,
vRtrLdpNgSessStatsIPv6P2MPFecRcv Counter32,
vRtrLdpNgSessStatsIPv4P2MPFecSnt Counter32,
vRtrLdpNgSessStatsIPv6P2MPFecSnt Counter32,
vRtrLdpNgSessStatsSvcFec128Recv Counter32,
vRtrLdpNgSessStatsSvcFec128Sent Counter32,
vRtrLdpNgSessStatsSvcFec129Recv Counter32,
vRtrLdpNgSessStatsSvcFec129Sent Counter32,
vRtrLdpNgSessStatsIPv4AddrRecv Counter32,
vRtrLdpNgSessStatsIPv6AddrRecv Counter32,
vRtrLdpNgSessStatsIPv4AddrSent Counter32,
vRtrLdpNgSessStatsIPv6AddrSent Counter32,
vRtrLdpNgSessStatsCapabilityIn Counter32,
vRtrLdpNgSessStatsCapabilityOut Counter32
}
vRtrLdpNgSessStatsTargAdj OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsTargAdj indicates the number of
targeted adjacencies for this session."
::= { vRtrLdpNgSessionStatsEntry 1 }
vRtrLdpNgSessStatsLinkAdj OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLinkAdj indicates the number of link
adjacencies for this session."
::= { vRtrLdpNgSessionStatsEntry 2 }
vRtrLdpNgSessStatsHelloIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsHelloIn counts the number of Hello
Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 3 }
vRtrLdpNgSessStatsHelloOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsHelloOut counts the number of Hello
Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 4 }
vRtrLdpNgSessStatsKeepaliveIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsKeepaliveIn counts the number of
Keepalive Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 5 }
vRtrLdpNgSessStatsKeepaliveOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsKeepaliveOut counts the number of
Keepalive Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 6 }
vRtrLdpNgSessStatsInitIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsInitIn counts the number of Init
Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 7 }
vRtrLdpNgSessStatsInitOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsInitOut counts the number of Init
Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 8 }
vRtrLdpNgSessStatsLblMappingIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblMappingIn counts the number of Label
Mapping Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 9 }
vRtrLdpNgSessStatsLblMappingOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblMappingOut counts the number of
Label Mapping Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 10 }
vRtrLdpNgSessStatsLblRequestIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblRequestIn counts the number of Label
Request Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 11 }
vRtrLdpNgSessStatsLblRequestOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblRequestOut counts the number of
Label Request Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 12 }
vRtrLdpNgSessStatsLblReleaseIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblReleaseIn counts the number of Label
Release Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 13 }
vRtrLdpNgSessStatsLblReleaseOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblReleaseOut counts the number of
Label Release Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 14 }
vRtrLdpNgSessStatsLblWithdrawIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblWithdrawIn counts the number of
Label Withdraw Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 15 }
vRtrLdpNgSessStatsLblWithdrawOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblWithdrawOut counts the number of
Label Withdraw Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 16 }
vRtrLdpNgSessStatsLblAbortIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblAbortIn counts the number of Label
Abort Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 17 }
vRtrLdpNgSessStatsLblAbortOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsLblAbortOut counts the number of Label
Abort Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 18 }
vRtrLdpNgSessStatsAddrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsAddrIn counts the number of Address
Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 19 }
vRtrLdpNgSessStatsAddrOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsAddrOut counts the number of Address
Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 20 }
vRtrLdpNgSessStatsAddrWithdrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsAddrWithdrIn counts the number of
Address Withdraw Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 21 }
vRtrLdpNgSessStatsAddrWithdrOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsAddrWithdrOut counts the number of
Address Withdraw Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 22 }
vRtrLdpNgSessStatsNotifIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsNotifIn counts the number of
Notification Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 23 }
vRtrLdpNgSessStatsNotifOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsNotifOut counts the number of
Notification Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 24 }
vRtrLdpNgSessStatsIPv4PfxFecRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv4PfxFecRcv counts the number of IPv4
prefix FECs received for this session."
::= { vRtrLdpNgSessionStatsEntry 25 }
vRtrLdpNgSessStatsIPv6PfxFecRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv6PfxFecRcv counts the number of IPv6
prefix FECs received for this session."
::= { vRtrLdpNgSessionStatsEntry 26 }
vRtrLdpNgSessStatsIPv4PfxFecSnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv4PfxFecSnt counts the number of IPv4
prefix FECs sent for this session."
::= { vRtrLdpNgSessionStatsEntry 27 }
vRtrLdpNgSessStatsIPv6PfxFecSnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv6PfxFecSnt counts the number of IPv6
prefix FECs sent for this session."
::= { vRtrLdpNgSessionStatsEntry 28 }
vRtrLdpNgSessStatsIPv4P2MPFecRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv4P2MPFecRcv counts the number of
IPv4 P2MP FECs received for this session."
::= { vRtrLdpNgSessionStatsEntry 29 }
vRtrLdpNgSessStatsIPv6P2MPFecRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv6P2MPFecRcv counts the number of
IPv6 P2MP FECs received for this session."
::= { vRtrLdpNgSessionStatsEntry 30 }
vRtrLdpNgSessStatsIPv4P2MPFecSnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv4P2MPFecSnt counts the number of
IPv4 P2MP FECs sent for this session."
::= { vRtrLdpNgSessionStatsEntry 31 }
vRtrLdpNgSessStatsIPv6P2MPFecSnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv6P2MPFecSnt counts the number of
IPv6 P2MP FECs sent for this session."
::= { vRtrLdpNgSessionStatsEntry 32 }
vRtrLdpNgSessStatsSvcFec128Recv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsSvcFec128Recv counts the number of
service FEC 128 received for this session."
::= { vRtrLdpNgSessionStatsEntry 33 }
vRtrLdpNgSessStatsSvcFec128Sent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsSvcFec128Sent counts the number of
service FEC 128 sent for this session."
::= { vRtrLdpNgSessionStatsEntry 34 }
vRtrLdpNgSessStatsSvcFec129Recv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsSvcFec129Recv counts the number of
service FEC 129 received for this session."
::= { vRtrLdpNgSessionStatsEntry 35 }
vRtrLdpNgSessStatsSvcFec129Sent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsSvcFec129Sent counts the number of
service FEC 129 sent for this session."
::= { vRtrLdpNgSessionStatsEntry 36 }
vRtrLdpNgSessStatsIPv4AddrRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv4AddrRecv counts the number of IPv4
local addresses received for this session."
::= { vRtrLdpNgSessionStatsEntry 37 }
vRtrLdpNgSessStatsIPv6AddrRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv6AddrRecv counts the number of IPv6
local addresses received for this session."
::= { vRtrLdpNgSessionStatsEntry 38 }
vRtrLdpNgSessStatsIPv4AddrSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv4AddrSent counts the number of IPv4
local addresses sent for this session."
::= { vRtrLdpNgSessionStatsEntry 39 }
vRtrLdpNgSessStatsIPv6AddrSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsIPv6AddrSent counts the number of IPv6
local addresses sent for this session."
::= { vRtrLdpNgSessionStatsEntry 40 }
vRtrLdpNgSessStatsCapabilityIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsCapabilityIn counts the number of
Capability Messages that have been received during this session."
::= { vRtrLdpNgSessionStatsEntry 41 }
vRtrLdpNgSessStatsCapabilityOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessStatsCapabilityOut counts the number of
Capability Messages that have been sent during this session."
::= { vRtrLdpNgSessionStatsEntry 42 }
vLdpNgSvcFec128Table OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgSvcFec128Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgSvcFec128Table is a read-only table that represents
operational information of Service FEC 128 either sent to or received
from an LDP peer known to the Virtual Router."
::= { tmnxLdpNgObjs 22 }
vLdpNgSvcFec128Entry OBJECT-TYPE
SYNTAX VLdpNgSvcFec128Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC 128 sent to or
received from an LDP peer."
INDEX {
vRtrID,
vLdpNgFec128FecType,
vLdpNgFec128VcType,
vLdpNgFec128VcId,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId
}
::= { vLdpNgSvcFec128Table 1 }
VLdpNgSvcFec128Entry ::= SEQUENCE
{
vLdpNgFec128FecType TmnxLdpFECType,
vLdpNgFec128VcType TmnxVcType,
vLdpNgFec128VcId TmnxVcId,
vLdpNgFec128ServType ServType,
vLdpNgFec128ServId TmnxServId,
vLdpNgFec128VpnId TmnxVpnId,
vLdpNgFec128Flags TmnxLdpFECFlags,
vLdpNgFec128NumInLabels Unsigned32,
vLdpNgFec128NumOutLabels Unsigned32,
vLdpNgFec128SdpId SdpId,
vLdpNgFec128MateEndptVcId TmnxVcIdOrNone,
vLdpNgFec128MateEndptSdpId SdpId
}
vLdpNgFec128FecType OBJECT-TYPE
SYNTAX TmnxLdpFECType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec128FecType specifies the FEC type associated
with this service FEC."
::= { vLdpNgSvcFec128Entry 1 }
vLdpNgFec128VcType OBJECT-TYPE
SYNTAX TmnxVcType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec128VcType specifies the VC type associated with
this service FEC."
::= { vLdpNgSvcFec128Entry 2 }
vLdpNgFec128VcId OBJECT-TYPE
SYNTAX TmnxVcId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec128VcId specifies the VC identifier associated
with this service FEC."
::= { vLdpNgSvcFec128Entry 3 }
vLdpNgFec128ServType OBJECT-TYPE
SYNTAX ServType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128ServType indicates the Service type
associated with this service FEC."
::= { vLdpNgSvcFec128Entry 4 }
vLdpNgFec128ServId OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128ServId indicates the Service identifier
associated with this service FEC."
::= { vLdpNgSvcFec128Entry 5 }
vLdpNgFec128VpnId OBJECT-TYPE
SYNTAX TmnxVpnId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128VpnId identifies the VPN associated with the
FEC."
::= { vLdpNgSvcFec128Entry 6 }
vLdpNgFec128Flags OBJECT-TYPE
SYNTAX TmnxLdpFECFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit flags of vLdpNgFec128Flags indicate the characteristics of the
FEC."
::= { vLdpNgSvcFec128Entry 7 }
vLdpNgFec128NumInLabels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128NumInLabels indicates the number of labels
that have been sent to the peer associated with this FEC."
::= { vLdpNgSvcFec128Entry 8 }
vLdpNgFec128NumOutLabels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128NumOutLabels indicates the number of labels
that have been received from the peer associated with this FEC."
::= { vLdpNgSvcFec128Entry 9 }
vLdpNgFec128SdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128SdpId identifies the SDP associated with this
peer."
::= { vLdpNgSvcFec128Entry 10 }
vLdpNgFec128MateEndptVcId OBJECT-TYPE
SYNTAX TmnxVcIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128MateEndptVcId indicates the VC identifier
associated with this service FEC mate endpoint for vc-switching.
vLdpNgFec128MateEndptVcId is set to zero (0) for non-switching FECs."
::= { vLdpNgSvcFec128Entry 11 }
vLdpNgFec128MateEndptSdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128MateEndptSdpId identifies the SDP associated
with this service FEC mate endpoint for vc-switching."
::= { vLdpNgSvcFec128Entry 12 }
vLdpNgSvcFec128InLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgSvcFec128InLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgSvcFec128InLblTable is a read-only table that represents all
service FEC 128 received from an LDP peer known to the Virtual Router."
::= { tmnxLdpNgObjs 23 }
vLdpNgSvcFec128InLblEntry OBJECT-TYPE
SYNTAX VLdpNgSvcFec128InLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC received from
an LDP peer."
INDEX {
vRtrID,
vLdpNgFec128FecType,
vLdpNgFec128VcType,
vLdpNgFec128VcId,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vLdpNgFec128InLabelId
}
::= { vLdpNgSvcFec128InLblTable 1 }
VLdpNgSvcFec128InLblEntry ::= SEQUENCE
{
vLdpNgFec128InLabelId Unsigned32,
vLdpNgFec128InLabel Unsigned32,
vLdpNgFec128InLabelStatus TmnxLabelStatus,
vLdpNgFec128InLabelSigStatus TmnxLabelSigStatus,
vLdpNgFec128InLblWdwReason TmnxLdpInLblWdrawalReasonCode,
vLdpNgFec128InLblMaxCellConcat Unsigned32,
vLdpNgFec128InLblFLTxCap TruthValue,
vLdpNgFec128InLblFLRxCap TruthValue,
vLdpNgFec128InLblIPv4CeIpAdType InetAddressType,
vLdpNgFec128InLblIPv4CeIpAddr InetAddress,
vLdpNgFec128InLblIPv4Cap TruthValue,
vLdpNgFec128InLblIPv6Cap TruthValue,
vLdpNgFec128InLblMTU Unsigned32,
vLdpNgFec128InLblVlanTag Unsigned32,
vLdpNgFec128InLblVccvCV BITS,
vLdpNgFec128InLblVccvCC BITS,
vLdpNgFec128InLblPwStatus TruthValue
}
vLdpNgFec128InLabelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLabelId identifies the ingress label
exchanged."
::= { vLdpNgSvcFec128InLblEntry 1 }
vLdpNgFec128InLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLabel indicates the ingress label
exchanged."
::= { vLdpNgSvcFec128InLblEntry 2 }
vLdpNgFec128InLabelStatus OBJECT-TYPE
SYNTAX TmnxLabelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLabelStatus indicates the status of the
ingress label."
::= { vLdpNgSvcFec128InLblEntry 3 }
vLdpNgFec128InLabelSigStatus OBJECT-TYPE
SYNTAX TmnxLabelSigStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLabelSigStatus indicates the signaling
status for vLdpNgFec128InLabel."
::= { vLdpNgSvcFec128InLblEntry 4 }
vLdpNgFec128InLblWdwReason OBJECT-TYPE
SYNTAX TmnxLdpInLblWdrawalReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblWdwReason indicates the reason of
withdrawal of ingress label value in vLdpNgFec128InLabel."
::= { vLdpNgSvcFec128InLblEntry 5 }
vLdpNgFec128InLblMaxCellConcat OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblMaxCellConcat indicates the local
maximum number of ATM cells to concatenate on a ATM cell-mode VC type
SDP binding."
::= { vLdpNgSvcFec128InLblEntry 6 }
vLdpNgFec128InLblFLTxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblFLTxCap indicates whether or not this
LDP peer is capable of sending Flow Label in its pseudowire (PW)
packet.
The value of vLdpNgFec128InLblFLTxCap is 'true' when this LDP peer is
capable of sending Flow Label and the value is 'false' when the peer
is not capable of sending Flow Label in pseudowire packet."
::= { vLdpNgSvcFec128InLblEntry 7 }
vLdpNgFec128InLblFLRxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblFLRxCap indicates whether or not this
LDP peer is capable of receiving Flow Label in its pseudowire packet.
The value of vLdpNgFec128InLblFLRxCap is 'true' when this LDP peer is
capable of receiving Flow Label and the value is 'false' when the peer
is not capable of receiving Flow Label in pseudowire packet."
::= { vLdpNgSvcFec128InLblEntry 8 }
vLdpNgFec128InLblIPv4CeIpAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblIPv4CeIpAdType indicates the local ipv4
CE Address type."
::= { vLdpNgSvcFec128InLblEntry 9 }
vLdpNgFec128InLblIPv4CeIpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblIPv4CeIpAddr indicates the local ipv4 CE
Address."
::= { vLdpNgSvcFec128InLblEntry 10 }
vLdpNgFec128InLblIPv4Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblIPv4Cap indicates whether or not the
local ipv4 stack capability is supported for this LDP peer.
The value of vLdpNgFec128InLblIPv4Cap is 'true' when the local ipv4
stack capability is supported and the value is 'false' when the local
ipv4 stack capability is not supported."
::= { vLdpNgSvcFec128InLblEntry 11 }
vLdpNgFec128InLblIPv6Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblIPv6Cap indicates whether or not the
local ipv6 stack capability is supported for this LDP peer.
The value of vLdpNgFec128InLblIPv6Cap is 'true' when the local ipv6
stack capability is supported and the value is 'false' when the local
ipv6 stack capability is not supported."
::= { vLdpNgSvcFec128InLblEntry 12 }
vLdpNgFec128InLblMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblMTU indicates the largest service frame
size (in octets) that can be handled by the local ESR."
::= { vLdpNgSvcFec128InLblEntry 13 }
vLdpNgFec128InLblVlanTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblVlanTag indicates the local tag on a
VLAN VC type SDP binding."
::= { vLdpNgSvcFec128InLblEntry 14 }
vLdpNgFec128InLblVccvCV OBJECT-TYPE
SYNTAX BITS {
icmpPing (0),
lspPing (1),
bfdFaultDetect (2),
bfdFaultDetectSignalling (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblVccvCV indicates the CV (Connectivity
Verification) types supported by peer LSR if it supports VCCV (Circuit
Connectivity Verification) on pseudowire. If VCCV is not supported,
vLdpNgFec128InLblVccvCV will be set to 0."
::= { vLdpNgSvcFec128InLblEntry 15 }
vLdpNgFec128InLblVccvCC OBJECT-TYPE
SYNTAX BITS {
pwe3ControlWord (0),
routerAlertLabel (1),
mplsDemuxLabelTL1 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblVccvCC indicates the CC (Control
Channel) types supported by peer LSR if it supports VCCV on
pseudowire. If VCCV is not supported, vLdpNgFec128InLblVccvCC will be
set to 0."
::= { vLdpNgSvcFec128InLblEntry 16 }
vLdpNgFec128InLblPwStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128InLblPwStatus indicates whether the local LSR
supports pseudowire status signaling."
::= { vLdpNgSvcFec128InLblEntry 17 }
vLdpNgSvcFec128OutLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgSvcFec128OutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgSvcFec128OutLblTable is a read-only table that represents
all service FEC 128 sent to an LDP peer known to the Virtual Router."
::= { tmnxLdpNgObjs 24 }
vLdpNgSvcFec128OutLblEntry OBJECT-TYPE
SYNTAX VLdpNgSvcFec128OutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC 128 sent to an
LDP peer."
INDEX {
vRtrID,
vLdpNgFec128FecType,
vLdpNgFec128VcType,
vLdpNgFec128VcId,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vLdpNgFec128OutLabelId
}
::= { vLdpNgSvcFec128OutLblTable 1 }
VLdpNgSvcFec128OutLblEntry ::= SEQUENCE
{
vLdpNgFec128OutLabelId Unsigned32,
vLdpNgFec128OutLabel Unsigned32,
vLdpNgFec128OutLabelStatus TmnxLabelStatus,
vLdpNgFec128OutLabelSigStatus TmnxLabelSigStatus,
vLdpNgFec128OutLblMaxCellConcat Unsigned32,
vLdpNgFec128OutLblFLTxCap TruthValue,
vLdpNgFec128OutLblFLRxCap TruthValue,
vLdpNgFec128OutLblIPv4CeAddrType InetAddressType,
vLdpNgFec128OutLblIPv4CeIpAddr InetAddress,
vLdpNgFec128OutLblIPv4Cap TruthValue,
vLdpNgFec128OutLblIPv6Cap TruthValue,
vLdpNgFec128OutLblMTU Unsigned32,
vLdpNgFec128OutLblVlanTag Unsigned32,
vLdpNgFec128OutLblVccvCV BITS,
vLdpNgFec128OutLblVccvCC BITS,
vLdpNgFec128OutLblPwStatus TruthValue
}
vLdpNgFec128OutLabelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLabelId specifies the identifier."
::= { vLdpNgSvcFec128OutLblEntry 1 }
vLdpNgFec128OutLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLabel indicates the egress label
exchanged."
::= { vLdpNgSvcFec128OutLblEntry 2 }
vLdpNgFec128OutLabelStatus OBJECT-TYPE
SYNTAX TmnxLabelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLabelStatus indicates the status of the
egress label."
::= { vLdpNgSvcFec128OutLblEntry 3 }
vLdpNgFec128OutLabelSigStatus OBJECT-TYPE
SYNTAX TmnxLabelSigStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLabelSigStatus indicates the signaling
status for vLdpNgFec128OutLabel."
::= { vLdpNgSvcFec128OutLblEntry 4 }
vLdpNgFec128OutLblMaxCellConcat OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblMaxCellConcat indicates the remote
maximum number of ATM cells to concatenate on a ATM cell-mode VC type
SDP binding."
::= { vLdpNgSvcFec128OutLblEntry 5 }
vLdpNgFec128OutLblFLTxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblFLTxCap indicates whether or not the
remote LDP peer is capable of sending Flow Label in its pseudowire
packet.
The value of vLdpNgFec128OutLblFLTxCap is 'true' when the remote LDP
peer is capable of sending Flow Label and the value is 'false' when
the peer is not capable of sending Flow Label in pseudowire packet."
::= { vLdpNgSvcFec128OutLblEntry 6 }
vLdpNgFec128OutLblFLRxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblFLRxCap indicates whether or not the
remote LDP peer is capable of receiving Flow Label in its pseudowire
packet.
The value of vLdpNgFec128OutLblFLRxCap is 'true' when the remote LDP
peer is capable of receiving Flow Label and the value is 'false' when
the peer is not capable of receiving Flow Label in pseudowire packet."
::= { vLdpNgSvcFec128OutLblEntry 7 }
vLdpNgFec128OutLblIPv4CeAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblIPv4CeAddrType indicates the remote
ipv4 CE Address type."
::= { vLdpNgSvcFec128OutLblEntry 8 }
vLdpNgFec128OutLblIPv4CeIpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblIPv4CeIpAddr indicates the remote ipv4
CE Address."
::= { vLdpNgSvcFec128OutLblEntry 9 }
vLdpNgFec128OutLblIPv4Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblIPv4Cap indicates whether or not the
remote ipv4 stack capability is supported for this LDP peer.
The value of vLdpNgFec128OutLblIPv4Cap is 'true' when the remote ipv4
stack capability is supported and the value is 'false' when the remote
ipv4 stack capability is not supported."
::= { vLdpNgSvcFec128OutLblEntry 10 }
vLdpNgFec128OutLblIPv6Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblIPv6Cap indicates whether or not the
remote ipv6 stack capability is supported for this LDP peer.
The value of vLdpNgFec128OutLblIPv6Cap is 'true' when the remote ipv6
stack capability is supported and the value is 'false' when the remote
ipv6 stack capability is not supported."
::= { vLdpNgSvcFec128OutLblEntry 11 }
vLdpNgFec128OutLblMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblMTU indicates the largest service frame
size (in octets) that can be handled by the remote ESR."
::= { vLdpNgSvcFec128OutLblEntry 12 }
vLdpNgFec128OutLblVlanTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblVlanTag indicates the remote tag on a
VLAN VC type SDP binding."
::= { vLdpNgSvcFec128OutLblEntry 13 }
vLdpNgFec128OutLblVccvCV OBJECT-TYPE
SYNTAX BITS {
icmpPing (0),
lspPing (1),
bfdFaultDetect (2),
bfdFaultDetectSignalling (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblVccvCV indicates the CV (Connectivity
Verification) types supported by local LSR if it supports VCCV
pseudowire. If VCCV is not supported, vLdpNgFec128OutLblVccvCV will be
set to 0."
::= { vLdpNgSvcFec128OutLblEntry 14 }
vLdpNgFec128OutLblVccvCC OBJECT-TYPE
SYNTAX BITS {
pwe3ControlWord (0),
routerAlertLabel (1),
mplsDemuxLabelTL1 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblVccvCC indicates the CC (Control
Channel) types supported by local LSR if it supports VCCV on
pseudowire. If VCCV is not supported, vLdpNgFec128OutLblVccvCC will be
set to 0."
::= { vLdpNgSvcFec128OutLblEntry 15 }
vLdpNgFec128OutLblPwStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec128OutLblPwStatus indicates whether the remote
LSR supports pseudowire status signaling."
::= { vLdpNgSvcFec128OutLblEntry 16 }
vRtrLdpNgHelloAdjMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgHelloAdjMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgHelloAdjMapTable is a read-only table which maps to the
vRtrLdpNgHelloAdjTable. This table has the same indexes as the
vRtrLdpNgHelloAdjTable but the order in which these indexes are
specified is different for the two tables."
::= { tmnxLdpNgObjs 25 }
vRtrLdpNgHelloAdjMapEntry OBJECT-TYPE
SYNTAX VRtrLdpNgHelloAdjMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a single LDP Hello Adjacency. An LDP Session can
have one or more Hello adjacencies."
INDEX {
vRtrID,
vRtrLdpNgIfIndex,
vRtrLdpNgIfAddrType,
vRtrLdpNgPeerAddressType,
vRtrLdpNgPeerAddress,
vRtrLdpNgHelloAdjMapLdpIdType,
vRtrLdpNgHelloAdjMapLdpId
}
::= { vRtrLdpNgHelloAdjMapTable 1 }
VRtrLdpNgHelloAdjMapEntry ::= SEQUENCE
{
vRtrLdpNgHelloAdjMapLdpIdType TmnxMplsLdpNgIdType,
vRtrLdpNgHelloAdjMapLdpId TmnxMplsLdpNgIdentifier,
vRtrLdpNgHelloAdjMapIndex Unsigned32
}
vRtrLdpNgHelloAdjMapLdpIdType OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgHelloAdjMapLdpIdType is an index for the row entry. It
indicates the LDP identifier type of the peer, indicated by
vRtrLdpNgHelloAdjMapLdpId."
::= { vRtrLdpNgHelloAdjMapEntry 1 }
vRtrLdpNgHelloAdjMapLdpId OBJECT-TYPE
SYNTAX TmnxMplsLdpNgIdentifier (SIZE (6|18))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgHelloAdjMapLdpId is an index for the row entry. It indicates
the LDP identifier of the peer."
::= { vRtrLdpNgHelloAdjMapEntry 2 }
vRtrLdpNgHelloAdjMapIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgHelloAdjMapIndex indicates the Hello adjacency
index which is an index for MPLS-LDP-MIB::mplsLdpHelloAdjacencyEntry."
::= { vRtrLdpNgHelloAdjMapEntry 3 }
vLdpNgSvcFec129Table OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgSvcFec129Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgSvcFec129Table is a read-only table that represents all
service FEC-129s either sent to or received from an LDP peer known to
the Virtual Router."
::= { tmnxLdpNgObjs 26 }
vLdpNgSvcFec129Entry OBJECT-TYPE
SYNTAX VLdpNgSvcFec129Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC-129 sent to or
received from an LDP peer."
INDEX {
vRtrID,
vLdpNgFec128VcType,
vLdpNgFec129AgiType,
vLdpNgFec129AgiLen,
vLdpNgFec129AgiVal,
vLdpNgFec129SrcAiiType,
vLdpNgFec129SrcAiiLen,
vLdpNgFec129SrcAiiVal,
vLdpNgFec129TgtAiiType,
vLdpNgFec129TgtAiiLen,
vLdpNgFec129TgtAiiVal,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId
}
::= { vLdpNgSvcFec129Table 1 }
VLdpNgSvcFec129Entry ::= SEQUENCE
{
vLdpNgFec129AgiType Unsigned32,
vLdpNgFec129AgiLen Unsigned32,
vLdpNgFec129AgiVal OCTET STRING,
vLdpNgFec129SrcAiiType Unsigned32,
vLdpNgFec129SrcAiiLen Unsigned32,
vLdpNgFec129SrcAiiVal OCTET STRING,
vLdpNgFec129TgtAiiType Unsigned32,
vLdpNgFec129TgtAiiLen Unsigned32,
vLdpNgFec129TgtAiiVal OCTET STRING,
vLdpNgFec129ServType ServType,
vLdpNgFec129ServId TmnxServId,
vLdpNgFec129VpnId TmnxVpnId,
vLdpNgFec129Flags TmnxLdpFECFlags,
vLdpNgFec129NumInLabels Unsigned32,
vLdpNgFec129NumOutLabels Unsigned32,
vLdpNgFec129SdpId SdpId,
vLdpNgFec129MateAgiType Unsigned32,
vLdpNgFec129MateAgiLen Unsigned32,
vLdpNgFec129MateAgiVal OCTET STRING,
vLdpNgFec129MateSrcAiiType Unsigned32,
vLdpNgFec129MateSrcAiiLen Unsigned32,
vLdpNgFec129MateSrcAiiVal OCTET STRING,
vLdpNgFec129MateTgtAiiType Unsigned32,
vLdpNgFec129MateTgtAiiLen Unsigned32,
vLdpNgFec129MateTgtAiiVal OCTET STRING,
vLdpNgFec129MateSdpId SdpId
}
vLdpNgFec129AgiType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129AgiType specifies the type of the Attachment
Group Identifier TLV associated with this service FEC."
::= { vLdpNgSvcFec129Entry 1 }
vLdpNgFec129AgiLen OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129AgiLen specifies the length of the Attachment
Group Identifier TLV associated with this service FEC."
::= { vLdpNgSvcFec129Entry 2 }
vLdpNgFec129AgiVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129AgiVal specifies the value of the Attachment
Group Identifier TLV associated with this service FEC."
::= { vLdpNgSvcFec129Entry 3 }
vLdpNgFec129SrcAiiType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129SrcAiiType specifies the type of the Source
Attachment Individual Identifier TLV associated with this service FEC."
::= { vLdpNgSvcFec129Entry 4 }
vLdpNgFec129SrcAiiLen OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129SrcAiiLen specifies the length of the Source
Attachment Individual Identifier TLV associated with this service FEC."
::= { vLdpNgSvcFec129Entry 5 }
vLdpNgFec129SrcAiiVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129SrcAiiVal specifies the value of the Source
Attachment Individual Identifier TLV associated with this service FEC."
::= { vLdpNgSvcFec129Entry 6 }
vLdpNgFec129TgtAiiType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129TgtAiiType specifies the type of the Target
Attachment Individual Identifier TLV associated with this service FEC."
::= { vLdpNgSvcFec129Entry 7 }
vLdpNgFec129TgtAiiLen OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129TgtAiiLen specifies the length of the Target
Attachment Individual Identifier TLV associated with this service FEC."
::= { vLdpNgSvcFec129Entry 8 }
vLdpNgFec129TgtAiiVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129TgtAiiVal specifies the value of the Target
Attachment Individual Identifier TLV associated with this service FEC."
::= { vLdpNgSvcFec129Entry 9 }
vLdpNgFec129ServType OBJECT-TYPE
SYNTAX ServType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129ServType indicates the Service type
associated with this service FEC."
::= { vLdpNgSvcFec129Entry 10 }
vLdpNgFec129ServId OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129ServId indicates the Service identifier
associated with this service FEC."
::= { vLdpNgSvcFec129Entry 11 }
vLdpNgFec129VpnId OBJECT-TYPE
SYNTAX TmnxVpnId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129VpnId identifies the VPN associated with the
FEC."
::= { vLdpNgSvcFec129Entry 12 }
vLdpNgFec129Flags OBJECT-TYPE
SYNTAX TmnxLdpFECFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129Flags indicates the characteristics of the
FEC."
::= { vLdpNgSvcFec129Entry 13 }
vLdpNgFec129NumInLabels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129NumInLabels indicates the number of labels
that have been sent to the peer associated with this FEC."
::= { vLdpNgSvcFec129Entry 14 }
vLdpNgFec129NumOutLabels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129NumOutLabels indicates the number of labels
that have been received from the peer associated with this FEC."
::= { vLdpNgSvcFec129Entry 15 }
vLdpNgFec129SdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129SdpId indicates the SDP associated with this
peer."
::= { vLdpNgSvcFec129Entry 16 }
vLdpNgFec129MateAgiType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateAgiType indicates the type of the
Attachment Group Identifier TLV switched with this service FEC."
::= { vLdpNgSvcFec129Entry 17 }
vLdpNgFec129MateAgiLen OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateAgiLen indicates the length of the
Attachment Group Identifier TLV switched with this service FEC."
::= { vLdpNgSvcFec129Entry 18 }
vLdpNgFec129MateAgiVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateAgiVal indicates the value of the
Attachment Group Identifier TLV switched with this service FEC."
::= { vLdpNgSvcFec129Entry 19 }
vLdpNgFec129MateSrcAiiType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateSrcAiiType indicates the type of the
Source Attachment Individual Identifier TLV switched with this service
FEC."
::= { vLdpNgSvcFec129Entry 20 }
vLdpNgFec129MateSrcAiiLen OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateSrcAiiLen indicates the length of the
Source Attachment Individual Identifier TLV switched with this service
FEC."
::= { vLdpNgSvcFec129Entry 21 }
vLdpNgFec129MateSrcAiiVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateSrcAiiVal indicates the value of the
Source Attachment Individual Identifier TLV switched with this service
FEC."
::= { vLdpNgSvcFec129Entry 22 }
vLdpNgFec129MateTgtAiiType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateTgtAiiType indicates the type of the
Target Attachment Individual Identifier TLV switched with this service
FEC."
::= { vLdpNgSvcFec129Entry 23 }
vLdpNgFec129MateTgtAiiLen OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateTgtAiiLen indicates the length of the
Target Attachment Individual Identifier TLV switched with this service
FEC."
::= { vLdpNgSvcFec129Entry 24 }
vLdpNgFec129MateTgtAiiVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateTgtAiiVal indicates the value of the
Target Attachment Individual Identifier TLV switched with this service
FEC."
::= { vLdpNgSvcFec129Entry 25 }
vLdpNgFec129MateSdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129MateSdpId indicates the SDP switched with
this peer."
::= { vLdpNgSvcFec129Entry 26 }
vLdpNgSvcFec129InLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgSvcFec129InLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgSvcFec129InLblTable is a read-only table that represents all
service FEC-129s received from an LDP peer known to the Virtual
Router."
::= { tmnxLdpNgObjs 27 }
vLdpNgSvcFec129InLblEntry OBJECT-TYPE
SYNTAX VLdpNgSvcFec129InLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC-129 received
from an LDP peer."
INDEX {
vRtrID,
vLdpNgFec128VcType,
vLdpNgFec129AgiType,
vLdpNgFec129AgiLen,
vLdpNgFec129AgiVal,
vLdpNgFec129SrcAiiType,
vLdpNgFec129SrcAiiLen,
vLdpNgFec129SrcAiiVal,
vLdpNgFec129TgtAiiType,
vLdpNgFec129TgtAiiLen,
vLdpNgFec129TgtAiiVal,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vLdpNgFec129InLblId
}
::= { vLdpNgSvcFec129InLblTable 1 }
VLdpNgSvcFec129InLblEntry ::= SEQUENCE
{
vLdpNgFec129InLblId Unsigned32,
vLdpNgFec129InLabel Unsigned32,
vLdpNgFec129InLabelStatus TmnxLabelStatus,
vLdpNgFec129InLblMTU Unsigned32,
vLdpNgFec129InLblVlanTag Unsigned32,
vLdpNgFec129InLblMaxCellConcat Unsigned32,
vLdpNgFec129InLblSigStatus TmnxLabelSigStatus,
vLdpNgFec129InLblIPv4Cap TruthValue,
vLdpNgFec129InLblIPv6Cap TruthValue,
vLdpNgFec129InLblIPv4CeAddrType InetAddressType,
vLdpNgFec129InLblIPv4CeIpAddr InetAddress,
vLdpNgFec129InLblWdwReason TmnxLdpInLblWdrawalReasonCode,
vLdpNgFec129InLblFLTxCap TruthValue,
vLdpNgFec129InLblFLRxCap TruthValue,
vLdpNgFec129InLblVccvCV BITS,
vLdpNgFec129InLblVccvCC BITS,
vLdpNgFec129InLblPwStatus TruthValue
}
vLdpNgFec129InLblId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblId indicates the label number of the
ingress label exchanged."
::= { vLdpNgSvcFec129InLblEntry 1 }
vLdpNgFec129InLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLabel indicates the ingress label
exchanged."
::= { vLdpNgSvcFec129InLblEntry 2 }
vLdpNgFec129InLabelStatus OBJECT-TYPE
SYNTAX TmnxLabelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLabelStatus indicates the status of the
ingress label."
::= { vLdpNgSvcFec129InLblEntry 3 }
vLdpNgFec129InLblMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblMTU indicates the largest service frame
size (in octets) that can be handled by the local ESR."
::= { vLdpNgSvcFec129InLblEntry 4 }
vLdpNgFec129InLblVlanTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblVlanTag indicates the local tag on a
VLAN VC type SDP binding."
::= { vLdpNgSvcFec129InLblEntry 5 }
vLdpNgFec129InLblMaxCellConcat OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblMaxCellConcat indicates the local
maximum number of ATM cells to concatenate on a ATM cell-mode VC type
SDP binding."
::= { vLdpNgSvcFec129InLblEntry 6 }
vLdpNgFec129InLblSigStatus OBJECT-TYPE
SYNTAX TmnxLabelSigStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblSigStatus indicates the signaling status
for vLdpNgFec129InLabel."
::= { vLdpNgSvcFec129InLblEntry 7 }
vLdpNgFec129InLblIPv4Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblIPv4Cap indicates whether or not the
local ipv4 stack capability is supported for this LDP peer.
The value of vLdpNgFec129InLblIPv4Cap is 'true' when the local ipv4
stack capability is supported and the value is 'false' when the local
ipv4 stack capability is not supported."
::= { vLdpNgSvcFec129InLblEntry 8 }
vLdpNgFec129InLblIPv6Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblIPv6Cap indicates whether or not the
local ipv6 stack capability is supported for this LDP peer.
The value of vLdpNgFec129InLblIPv6Cap is 'true' when the local ipv6
stack capability is supported and the value is 'false' when the local
ipv6 stack capability is not supported."
::= { vLdpNgSvcFec129InLblEntry 9 }
vLdpNgFec129InLblIPv4CeAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblIPv4CeAddrType indicates the local CE
Address type of the object indicated by vLdpNgFec129InLblIPv4CeIpAddr."
::= { vLdpNgSvcFec129InLblEntry 10 }
vLdpNgFec129InLblIPv4CeIpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblIPv4CeIpAddr indicates the local CE
Address."
::= { vLdpNgSvcFec129InLblEntry 11 }
vLdpNgFec129InLblWdwReason OBJECT-TYPE
SYNTAX TmnxLdpInLblWdrawalReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblWdwReason indicates the reason of
withdrawal of ingress label value in vLdpNgFec129InLabel."
::= { vLdpNgSvcFec129InLblEntry 12 }
vLdpNgFec129InLblFLTxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblFLTxCap indicates whether or not this
LDP peer is capable of sending Flow Label in its pseudowire (PW)
packet.
The value of vLdpNgFec129InLblFLTxCap is 'true' when this LDP peer is
capable of sending Flow Label and the value is 'false' when the peer
is not capable of sending Flow Label in pseudowire packet."
::= { vLdpNgSvcFec129InLblEntry 13 }
vLdpNgFec129InLblFLRxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblFLRxCap indicates whether or not this
LDP peer is capable of receiving Flow Label in its pseudowire packet.
The value of vLdpNgFec129InLblFLRxCap is 'true' when this LDP peer is
capable of receiving Flow Label and the value is 'false' when the peer
is not capable of receiving Flow Label in pseudowire packet."
::= { vLdpNgSvcFec129InLblEntry 14 }
vLdpNgFec129InLblVccvCV OBJECT-TYPE
SYNTAX BITS {
icmpPing (0),
lspPing (1),
bfdFaultDetect (2),
bfdFaultDetectSignalling (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblVccvCV indicates the CV (Connectivity
Verification) types supported by local LSR if it supports VCCV on
pseudowire. If VCCV is not supported, vLdpNgFec129InLblVccvCV will be
set to 0."
::= { vLdpNgSvcFec129InLblEntry 15 }
vLdpNgFec129InLblVccvCC OBJECT-TYPE
SYNTAX BITS {
pwe3ControlWord (0),
routerAlertLabel (1),
mplsDemuxLabelTL1 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblVccvCC indicates the CC (Control
Channel) types supported by local LSR if it supports VCCV on
pseudowire. If VCCV is not supported, vLdpNgFec129InLblVccvCC will be
set to 0."
::= { vLdpNgSvcFec129InLblEntry 16 }
vLdpNgFec129InLblPwStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129InLblPwStatus indicates whether the local LSR
supports pseudowire status signaling."
::= { vLdpNgSvcFec129InLblEntry 17 }
vLdpNgSvcFec129OutLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgSvcFec129OutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgSvcFec129OutLblTable is a read-only table that represents
all service FEC-129s sent to an LDP peer known to the Virtual Router."
::= { tmnxLdpNgObjs 28 }
vLdpNgSvcFec129OutLblEntry OBJECT-TYPE
SYNTAX VLdpNgSvcFec129OutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC-129 sent to an
LDP peer."
INDEX {
vRtrID,
vLdpNgFec128VcType,
vLdpNgFec129AgiType,
vLdpNgFec129AgiLen,
vLdpNgFec129AgiVal,
vLdpNgFec129SrcAiiType,
vLdpNgFec129SrcAiiLen,
vLdpNgFec129SrcAiiVal,
vLdpNgFec129TgtAiiType,
vLdpNgFec129TgtAiiLen,
vLdpNgFec129TgtAiiVal,
vRtrLdpNgPeerLdpIdType,
vRtrLdpNgPeerLdpId,
vLdpNgFec129OutLblId
}
::= { vLdpNgSvcFec129OutLblTable 1 }
VLdpNgSvcFec129OutLblEntry ::= SEQUENCE
{
vLdpNgFec129OutLblId Unsigned32,
vLdpNgFec129OutLabel Unsigned32,
vLdpNgFec129OutLabelStatus TmnxLabelStatus,
vLdpNgFec129OutLblMTU Unsigned32,
vLdpNgFec129OutLblVlanTag Unsigned32,
vLdpNgFec129OutLblMaxCellConcat Unsigned32,
vLdpNgFec129OutLblSigStatus TmnxLabelSigStatus,
vLdpNgFec129OutLblIPv4Cap TruthValue,
vLdpNgFec129OutLblIPv6Cap TruthValue,
vLdpNgFec129OutLblIPv4CeAddrType InetAddressType,
vLdpNgFec129OutLblIPv4CeIpAddr InetAddress,
vLdpNgFec129OutLblFLTxCap TruthValue,
vLdpNgFec129OutLblFLRxCap TruthValue,
vLdpNgFec129OutLblVccvCV BITS,
vLdpNgFec129OutLblVccvCC BITS,
vLdpNgFec129OutLblPwStatus TruthValue
}
vLdpNgFec129OutLblId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblId indicates the label number of the
egress label exchanged."
::= { vLdpNgSvcFec129OutLblEntry 1 }
vLdpNgFec129OutLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLabel indicates the egress label
exchanged."
::= { vLdpNgSvcFec129OutLblEntry 2 }
vLdpNgFec129OutLabelStatus OBJECT-TYPE
SYNTAX TmnxLabelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLabelStatus indicates the status of the
egress label"
::= { vLdpNgSvcFec129OutLblEntry 3 }
vLdpNgFec129OutLblMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblMTU indicates the largest service frame
size (in octets) that can be handled by the remote ESR."
::= { vLdpNgSvcFec129OutLblEntry 4 }
vLdpNgFec129OutLblVlanTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblVlanTag indicates the remote tag on a
VLAN VC type SDP binding."
::= { vLdpNgSvcFec129OutLblEntry 5 }
vLdpNgFec129OutLblMaxCellConcat OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblMaxCellConcat indicates the remote
maximum number of ATM cells to concatenate on a ATM cell-mode VC type
SDP binding."
::= { vLdpNgSvcFec129OutLblEntry 6 }
vLdpNgFec129OutLblSigStatus OBJECT-TYPE
SYNTAX TmnxLabelSigStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblSigStatus indicates the signaling
status for vLdpNgFec129OutLabel."
::= { vLdpNgSvcFec129OutLblEntry 7 }
vLdpNgFec129OutLblIPv4Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblIPv4Cap indicates whether or not the
remote ipv4 stack capability is supported for this LDP peer.
The value of vLdpNgFec129OutLblIPv4Cap is 'true' when the remote ipv4
stack capability is supported and the value is 'false' when the remote
ipv4 stack capability is not supported."
::= { vLdpNgSvcFec129OutLblEntry 8 }
vLdpNgFec129OutLblIPv6Cap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblIPv6Cap indicates whether or not the
remote ipv6 stack capability is supported for this LDP peer.
The value of vLdpNgFec129OutLblIPv6Cap is 'true' when the remote ipv6
stack capability is supported and the value is 'false' when the remote
ipv6 stack capability is not supported."
::= { vLdpNgSvcFec129OutLblEntry 9 }
vLdpNgFec129OutLblIPv4CeAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblIPv4CeAddrType indicates the remote CE
Address type of the object indicated by
vLdpNgFec129OutLblIPv4CeIpAddr."
::= { vLdpNgSvcFec129OutLblEntry 10 }
vLdpNgFec129OutLblIPv4CeIpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblIPv4CeIpAddr indicates the remote CE
Address."
::= { vLdpNgSvcFec129OutLblEntry 11 }
vLdpNgFec129OutLblFLTxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblFLTxCap indicates whether or not the
remote LDP peer is capable of sending Flow Label in its pseudowire
packet.
The value of vLdpNgFec129OutLblFLTxCap is 'true' when the remote LDP
peer is capable of sending Flow Label and the value is 'false' when
the peer is not capable of sending Flow Label in pseudowire packet."
::= { vLdpNgSvcFec129OutLblEntry 12 }
vLdpNgFec129OutLblFLRxCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblFLRxCap indicates whether or not the
remote LDP peer is capable of receiving Flow Label in its pseudowire
packet.
The value of vLdpNgFec129OutLblFLRxCap is 'true' when the remote LDP
peer is capable of receiving Flow Label and the value is 'false' when
the peer is not capable of receiving Flow Label in pseudowire packet."
::= { vLdpNgSvcFec129OutLblEntry 13 }
vLdpNgFec129OutLblVccvCV OBJECT-TYPE
SYNTAX BITS {
icmpPing (0),
lspPing (1),
bfdFaultDetect (2),
bfdFaultDetectSignalling (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblVccvCV indicates the CV (Connectivity
Verification) types supported by remote LSR if it supports VCCV on
pseudowire. If VCCV is not supported, vLdpNgFec129OutLblVccvCV will be
set to 0."
::= { vLdpNgSvcFec129OutLblEntry 14 }
vLdpNgFec129OutLblVccvCC OBJECT-TYPE
SYNTAX BITS {
pwe3ControlWord (0),
routerAlertLabel (1),
mplsDemuxLabelTL1 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblVccvCC indicates the CC (Control
Channel) types supported by remote LSR if it supports VCCV on
pseudowire. If VCCV is not supported, vLdpNgFec129OutLblVccvCC will be
set to 0."
::= { vLdpNgSvcFec129OutLblEntry 15 }
vLdpNgFec129OutLblPwStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgFec129OutLblPwStatus indicates whether the remote
LSR supports pseudowire status signaling."
::= { vLdpNgSvcFec129OutLblEntry 16 }
vLdpNgCepTdmFec128InLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgCepTdmFec128InLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgCepTdmFec128InLblTable is a read-only table that represents
all CEP/TDM FECs received from an LDP peer known to the Virtual
Router. The CEP/TDM Sub-TLVs are defined in RFC 4446:
Parameter Id Description
0x04 CEP/TDM Payload Bytes
0x07 CEP/TDM bit-rate
0x0B TDM Options."
::= { tmnxLdpNgObjs 29 }
vLdpNgCepTdmFec128InLblEntry OBJECT-TYPE
SYNTAX VLdpNgCepTdmFec128InLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC 128 sent to or
received from an LDP peer.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vLdpNgSvcFec128InLblTable, and the augmenting
table, vLdpNgCepTdmFec128InLblTable. This in effect extends the
vLdpNgSvcFec128InLblTable with additional columns.
Creation or deletion of a row in the vLdpNgSvcFec128InLblTable results
in the same fate for the row in the vLdpNgCepTdmFec128InLblEntry."
AUGMENTS { vLdpNgSvcFec128InLblEntry }
::= { vLdpNgCepTdmFec128InLblTable 1 }
VLdpNgCepTdmFec128InLblEntry ::= SEQUENCE
{
vLdpNgCepTdmFec128InLblPayldSize Unsigned32,
vLdpNgCepTdmFec128InLblBitrate Unsigned32,
vLdpNgCepTdmFec128InLblRtpHeader TruthValue,
vLdpNgCepTdmFec128InLblDiffTStmp TruthValue,
vLdpNgCepTdmFec128InLblSigPkts TdmOptionsSigPkts,
vLdpNgCepTdmFec128InLblCasTrunk TdmOptionsCasTrunkFraming,
vLdpNgCepTdmFec128InLblTStmpFreq Unsigned32,
vLdpNgCepTdmFec128InLblPayldType Unsigned32,
vLdpNgCepTdmFec128InLblSsrcId Unsigned32
}
vLdpNgCepTdmFec128InLblPayldSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128InLblPayldSize indicates the local
payload size."
::= { vLdpNgCepTdmFec128InLblEntry 1 }
vLdpNgCepTdmFec128InLblBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "sixty-four kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128InLblBitrate indicates the local
bitrate."
::= { vLdpNgCepTdmFec128InLblEntry 2 }
vLdpNgCepTdmFec128InLblRtpHeader OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128InLblRtpHeader indicates the local RTP
header usage bit."
::= { vLdpNgCepTdmFec128InLblEntry 3 }
vLdpNgCepTdmFec128InLblDiffTStmp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128InLblDiffTStmp indicates the local
differential (or dynamic) timestamping mode bit."
::= { vLdpNgCepTdmFec128InLblEntry 4 }
vLdpNgCepTdmFec128InLblSigPkts OBJECT-TYPE
SYNTAX TdmOptionsSigPkts
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128InLblSigPkts indicates the local CE
application signalling packets mode."
::= { vLdpNgCepTdmFec128InLblEntry 5 }
vLdpNgCepTdmFec128InLblCasTrunk OBJECT-TYPE
SYNTAX TdmOptionsCasTrunkFraming
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128InLblCasTrunk indicates the local CE
application signalling packets mode."
::= { vLdpNgCepTdmFec128InLblEntry 6 }
vLdpNgCepTdmFec128InLblTStmpFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "8 KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128InLblTStmpFreq indicates the local CE
application signalling packets mode."
::= { vLdpNgCepTdmFec128InLblEntry 7 }
vLdpNgCepTdmFec128InLblPayldType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128InLblPayldType indicates the local
payload type."
::= { vLdpNgCepTdmFec128InLblEntry 8 }
vLdpNgCepTdmFec128InLblSsrcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128InLblSsrcId indicates the local value
of SSRC ID."
::= { vLdpNgCepTdmFec128InLblEntry 9 }
vLdpNgCepTdmFec128OutLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgCepTdmFec128OutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgCepTdmFec128OutLblTable is a read-only table that represents
all CEP/TDM FECs sent to an LDP peer known to the Virtual Router. The
CEP/TDM Sub-TLVs are defined in RFC 4446:
Parameter Id Description
0x04 CEP/TDM Payload Bytes
0x07 CEP/TDM bit-rate
0x0B TDM Options."
::= { tmnxLdpNgObjs 30 }
vLdpNgCepTdmFec128OutLblEntry OBJECT-TYPE
SYNTAX VLdpNgCepTdmFec128OutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC sent to or
received from an LDP peer.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vLdpNgSvcFec128OutLblTable, and the augmenting
table, vLdpNgCepTdmFec128OutLblTable. This in effect extends the
vLdpNgSvcFec128OutLblTable with additional columns.
Creation or deletion of a row in the vLdpNgSvcFec128OutLblTable results
in the same fate for the row in the vLdpNgCepTdmFec128OutLblEntry."
AUGMENTS { vLdpNgSvcFec128OutLblEntry }
::= { vLdpNgCepTdmFec128OutLblTable 1 }
VLdpNgCepTdmFec128OutLblEntry ::= SEQUENCE
{
vLdpNgCepTdmFec128OutLblPyldSze Unsigned32,
vLdpNgCepTdmFec128OutLblBitrate Unsigned32,
vLdpNgCepTdmFec128OutLblRtpHdr TruthValue,
vLdpNgCepTdmFec128OutLblDfTstmp TruthValue,
vLdpNgCepTdmFec128OutLblSigPkts TdmOptionsSigPkts,
vLdpNgCepTdmFec128OutLblCasTrnk TdmOptionsCasTrunkFraming,
vLdpNgCepTdmFec128OutLblTstmpFq Unsigned32,
vLdpNgCepTdmFec128OutLblPyldTyp Unsigned32,
vLdpNgCepTdmFec128OutLblSsrcId Unsigned32
}
vLdpNgCepTdmFec128OutLblPyldSze OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128OutLblPyldSze indicates the remote
payload size."
::= { vLdpNgCepTdmFec128OutLblEntry 1 }
vLdpNgCepTdmFec128OutLblBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "sixty-four kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128OutLblBitrate indicates the remote
bitrate."
::= { vLdpNgCepTdmFec128OutLblEntry 2 }
vLdpNgCepTdmFec128OutLblRtpHdr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128OutLblRtpHdr indicates the remote RTP
header usage bit."
::= { vLdpNgCepTdmFec128OutLblEntry 3 }
vLdpNgCepTdmFec128OutLblDfTstmp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128OutLblDfTstmp indicates the remote
differential (or dynamic) timestamping mode bit."
::= { vLdpNgCepTdmFec128OutLblEntry 4 }
vLdpNgCepTdmFec128OutLblSigPkts OBJECT-TYPE
SYNTAX TdmOptionsSigPkts
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128OutLblSigPkts indicates the remote CE
application signalling packets mode."
::= { vLdpNgCepTdmFec128OutLblEntry 5 }
vLdpNgCepTdmFec128OutLblCasTrnk OBJECT-TYPE
SYNTAX TdmOptionsCasTrunkFraming
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128OutLblCasTrnk indicates the remote CE
application signalling packets mode."
::= { vLdpNgCepTdmFec128OutLblEntry 6 }
vLdpNgCepTdmFec128OutLblTstmpFq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "8 KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128OutLblTstmpFq indicates the remote CE
application signalling packets mode."
::= { vLdpNgCepTdmFec128OutLblEntry 7 }
vLdpNgCepTdmFec128OutLblPyldTyp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128OutLblPyldTyp indicates the remote
payload type."
::= { vLdpNgCepTdmFec128OutLblEntry 8 }
vLdpNgCepTdmFec128OutLblSsrcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec128OutLblSsrcId indicates the remote value
of SSRC ID."
::= { vLdpNgCepTdmFec128OutLblEntry 9 }
vLdpNgCepTdmFec129InLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgCepTdmFec129InLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgCepTdmFec129InLblTable is a read-only table that represents
all CEP/TDM FECs received from an LDP peer known to the Virtual
Router. The CEP/TDM Sub-TLVs are defined in RFC 4446:
Parameter Id Description
0x04 CEP/TDM Payload Bytes
0x07 CEP/TDM bit-rate
0x0B TDM Options."
::= { tmnxLdpNgObjs 31 }
vLdpNgCepTdmFec129InLblEntry OBJECT-TYPE
SYNTAX VLdpNgCepTdmFec129InLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC received from
an LDP peer.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vLdpNgSvcFec129InLblTable, and the augmenting
table, vLdpNgCepTdmFec129InLblTable. This in effect extends the
vLdpNgSvcFec129InLblTable with additional columns.
Creation or deletion of a row in the vLdpNgSvcFec129InLblTable results
in the same fate for the row in the VLdpNgCepTdmFec129InLblEntry."
AUGMENTS { vLdpNgSvcFec129InLblEntry }
::= { vLdpNgCepTdmFec129InLblTable 1 }
VLdpNgCepTdmFec129InLblEntry ::= SEQUENCE
{
vLdpNgCepTdmFec129InLblPayldSize Unsigned32,
vLdpNgCepTdmFec129InLblBitrate Unsigned32,
vLdpNgCepTdmFec129InLblRtpHeader TruthValue,
vLdpNgCepTdmFec129InLblDiffTStmp TruthValue,
vLdpNgCepTdmFec129InLblSigPkts TdmOptionsSigPkts,
vLdpNgCepTdmFec129InLblCasTrunk TdmOptionsCasTrunkFraming,
vLdpNgCepTdmFec129InLblTStmpFreq Unsigned32,
vLdpNgCepTdmFec129InLblPayldType Unsigned32,
vLdpNgCepTdmFec129InLblSsrcId Unsigned32
}
vLdpNgCepTdmFec129InLblPayldSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129InLblPayldSize indicates the local
payload size."
::= { vLdpNgCepTdmFec129InLblEntry 1 }
vLdpNgCepTdmFec129InLblBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "sixty-four kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129InLblBitrate indicates the local
bitrate."
::= { vLdpNgCepTdmFec129InLblEntry 2 }
vLdpNgCepTdmFec129InLblRtpHeader OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129InLblRtpHeader indicates the local RTP
header usage bit."
::= { vLdpNgCepTdmFec129InLblEntry 3 }
vLdpNgCepTdmFec129InLblDiffTStmp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129InLblDiffTStmp indicates the local
differential (or dynamic) timestamping mode bit."
::= { vLdpNgCepTdmFec129InLblEntry 4 }
vLdpNgCepTdmFec129InLblSigPkts OBJECT-TYPE
SYNTAX TdmOptionsSigPkts
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129InLblSigPkts indicates the local CE
application signalling packets mode."
::= { vLdpNgCepTdmFec129InLblEntry 5 }
vLdpNgCepTdmFec129InLblCasTrunk OBJECT-TYPE
SYNTAX TdmOptionsCasTrunkFraming
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129InLblCasTrunk indicates the local CE
application signalling packets mode."
::= { vLdpNgCepTdmFec129InLblEntry 6 }
vLdpNgCepTdmFec129InLblTStmpFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "8 KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129InLblTStmpFreq indicates the local CE
application signalling packets mode."
::= { vLdpNgCepTdmFec129InLblEntry 7 }
vLdpNgCepTdmFec129InLblPayldType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129InLblPayldType indicates the local
payload type."
::= { vLdpNgCepTdmFec129InLblEntry 8 }
vLdpNgCepTdmFec129InLblSsrcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129InLblSsrcId indicates the local value
of SSRC ID."
::= { vLdpNgCepTdmFec129InLblEntry 9 }
vLdpNgCepTdmFec129OutLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgCepTdmFec129OutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vLdpNgCepTdmFec129OutLblTable is a read-only table that represents
all CEP/TDM FECs sent to an LDP peer known to the Virtual Router. The
CEP/TDM Sub-TLVs are defined in RFC 4446:
Parameter Id Description
0x04 CEP/TDM Payload Bytes
0x07 CEP/TDM bit-rate
0x0B TDM Options."
::= { tmnxLdpNgObjs 32 }
vLdpNgCepTdmFec129OutLblEntry OBJECT-TYPE
SYNTAX VLdpNgCepTdmFec129OutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of a service FEC sent to an LDP
peer.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vLdpNgSvcFec129OutLblTable, and the augmenting
table, vLdpNgCepTdmFec129OutLblTable. This in effect extends the
vLdpNgSvcFec129OutLblTable with additional columns.
Creation or deletion of a row in the vLdpNgSvcFec129OutLblTable
results in the same fate for the row in the
VLdpNgCepTdmFec129OutLblEntry."
AUGMENTS { vLdpNgSvcFec129OutLblEntry }
::= { vLdpNgCepTdmFec129OutLblTable 1 }
VLdpNgCepTdmFec129OutLblEntry ::= SEQUENCE
{
vLdpNgCepTdmFec129OutLblPyldSize Unsigned32,
vLdpNgCepTdmFec129OutLblBitrate Unsigned32,
vLdpNgCepTdmFec129OutLblRtpHdr TruthValue,
vLdpNgCepTdmFec129OutLblDifTStmp TruthValue,
vLdpNgCepTdmFec129OutLblSigPkts TdmOptionsSigPkts,
vLdpNgCepTdmFec129OutLblCasTrnk TdmOptionsCasTrunkFraming,
vLdpNgCepTdmFec129OutLblTStmpFrq Unsigned32,
vLdpNgCepTdmFec129OutLblPyldType Unsigned32,
vLdpNgCepTdmFec129OutLblSsrcId Unsigned32
}
vLdpNgCepTdmFec129OutLblPyldSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129OutLblPyldSize indicates the remote
payload size."
::= { vLdpNgCepTdmFec129OutLblEntry 1 }
vLdpNgCepTdmFec129OutLblBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "sixty-four kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129OutLblBitrate indicates the remote
bitrate."
::= { vLdpNgCepTdmFec129OutLblEntry 2 }
vLdpNgCepTdmFec129OutLblRtpHdr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129OutLblRtpHdr indicates the remote RTP
header usage bit."
::= { vLdpNgCepTdmFec129OutLblEntry 3 }
vLdpNgCepTdmFec129OutLblDifTStmp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129OutLblDifTStmp indicates the remote
differential (or dynamic) timestamping mode bit."
::= { vLdpNgCepTdmFec129OutLblEntry 4 }
vLdpNgCepTdmFec129OutLblSigPkts OBJECT-TYPE
SYNTAX TdmOptionsSigPkts
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129OutLblSigPkts indicates the remote CE
application signalling packets mode."
::= { vLdpNgCepTdmFec129OutLblEntry 5 }
vLdpNgCepTdmFec129OutLblCasTrnk OBJECT-TYPE
SYNTAX TdmOptionsCasTrunkFraming
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129OutLblCasTrnk indicates the remote CE
application signalling packets mode."
::= { vLdpNgCepTdmFec129OutLblEntry 6 }
vLdpNgCepTdmFec129OutLblTStmpFrq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "8 KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129OutLblTStmpFrq indicates the remote CE
application signalling packets mode."
::= { vLdpNgCepTdmFec129OutLblEntry 7 }
vLdpNgCepTdmFec129OutLblPyldType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129OutLblPyldType indicates the remote
payload type."
::= { vLdpNgCepTdmFec129OutLblEntry 8 }
vLdpNgCepTdmFec129OutLblSsrcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgCepTdmFec129OutLblSsrcId indicates the remote value
of SSRC ID."
::= { vLdpNgCepTdmFec129OutLblEntry 9 }
vRtrLdpNgStaticFecTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgStaticFecTableLstCh indicates the last timestamp
when an entry in the vRtrLdpNgStaticFecTable was last changed."
::= { tmnxLdpNgObjs 33 }
vRtrLdpNgStaticFecTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgStaticFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgStaticFecTable has an entry for each static prefix FEC
configured on the virtual router."
::= { tmnxLdpNgObjs 34 }
vRtrLdpNgStaticFecEntry OBJECT-TYPE
SYNTAX VRtrLdpNgStaticFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a static prefix FEC configured on the
virtual router.
Entries can be created and deleted via SNMP SET operations to
vRtrLdpNgStaticFecRowStatus.
An entry is created by setting vRtrLdpNgStaticFecRowStatus to
'createAndGo'.
An entry is deleted by setting vRtrLdpNgStaticFecRowStatus to
'destroy'."
INDEX {
vRtrID,
vRtrLdpNgStaticFecIpPrefixType,
vRtrLdpNgStaticFecIpPrefix,
vRtrLdpNgStaticFecIpPrefixLen
}
::= { vRtrLdpNgStaticFecTable 1 }
VRtrLdpNgStaticFecEntry ::= SEQUENCE
{
vRtrLdpNgStaticFecIpPrefixType InetAddressType,
vRtrLdpNgStaticFecIpPrefix InetAddress,
vRtrLdpNgStaticFecIpPrefixLen InetAddressPrefixLength,
vRtrLdpNgStaticFecRowStatus RowStatus,
vRtrLdpNgStaticFecNumInLabel Unsigned32,
vRtrLdpNgStaticFecNumOutLabel Unsigned32
}
vRtrLdpNgStaticFecIpPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgStaticFecIpPrefixType specifies the IP Address
Prefix type for the static FEC indicated by
vRtrLdpNgStaticFecIpPrefix."
::= { vRtrLdpNgStaticFecEntry 1 }
vRtrLdpNgStaticFecIpPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgStaticFecIpPrefix specifies the IP Address
Prefix for this static FEC."
::= { vRtrLdpNgStaticFecEntry 2 }
vRtrLdpNgStaticFecIpPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgStaticFecIpPrefixLen specifies the IP Address
Mask length for this static FEC."
::= { vRtrLdpNgStaticFecEntry 3 }
vRtrLdpNgStaticFecRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrLdpNgStaticFecRowStatus is used to create, delete or control
entries in the vRtrLdpNgStaticFecTable.
An entry is created by setting vRtrLdpNgStaticFecRowStatus
'createAndGo'.
An entry is deleted by setting vRtrLdpNgStaticFecRowStatus to
'destroy'."
::= { vRtrLdpNgStaticFecEntry 4 }
vRtrLdpNgStaticFecNumInLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgStaticFecNumInLabel indicates the number of in
labels that are associated with the static prefix FEC represented by
this row entry. This is also the number of row entries configured in
the vRtrLdpNgStaticFecInLabelTable for this static prefix FEC.
If the static FEC has no in labels associated with it, this value will
be 0."
::= { vRtrLdpNgStaticFecEntry 5 }
vRtrLdpNgStaticFecNumOutLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgStaticFecNumOutLabel indicates the number of out
labels that are associated with the static prefix FEC represented by
this row entry. This is also the number of row entries configured in
the vRtrLdpNgStaticFecOutLabelTable for this static prefix FEC.
If the static FEC has no out labels associated with it, this value
will be 0."
::= { vRtrLdpNgStaticFecEntry 6 }
vRtrLdpNgStaticFecInLabelTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgStaticFecInLabelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgStaticFecInLabelTable has an entry for each static prefix FEC
in label configured on the virtual router."
::= { tmnxLdpNgObjs 35 }
vRtrLdpNgStaticFecInLabelEntry OBJECT-TYPE
SYNTAX VRtrLdpNgStaticFecInLabelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a static prefix FEC in label configured on
the virtual router. The static prefix FEC corresponding to a in label
entry must exist as a row entry in the vRtrLdpNgStaticFecTable.
Entries can be created and deleted via SNMP SET operations to
vRtrLdpNgSFecInLabelRowStatus.
An entry is created by setting vRtrLdpNgSFecInLabelRowStatus to
'createAndGo'.
An entry is deleted by setting vRtrLdpNgSFecInLabelRowStatus to
'destroy'."
INDEX {
vRtrID,
vRtrLdpNgStaticFecIpPrefixType,
vRtrLdpNgStaticFecIpPrefix,
vRtrLdpNgStaticFecIpPrefixLen,
vRtrLdpNgSFecInLabel
}
::= { vRtrLdpNgStaticFecInLabelTable 1 }
VRtrLdpNgStaticFecInLabelEntry ::= SEQUENCE
{
vRtrLdpNgSFecInLabel Unsigned32,
vRtrLdpNgSFecInLabelRowStatus RowStatus,
vRtrLdpNgSFecOperInLabel Unsigned32
}
vRtrLdpNgSFecInLabel OBJECT-TYPE
SYNTAX Unsigned32 (32..1048575 | 4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSFecInLabel indicates the label that is
advertised to the upstream peer.
The range of vRtrLdpNgSFecInLabel is dynamic and depends on the value
of vRtrMplsLabelStaticLabelRange.
The normal range of vRtrLdpNgSFecInLabel starts at 32 and ends at the
value of vRtrMplsLabelStaticLabelRange + 31.
If this variable is set to the value of 4294967295, the ingress label
will be dynamically assigned by the label manager."
::= { vRtrLdpNgStaticFecInLabelEntry 1 }
vRtrLdpNgSFecInLabelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrLdpNgSFecInLabelRowStatus is used to create, delete or control
entries in the vRtrLdpNgStaticFecInLabelTable.
An entry is created by setting vRtrLdpNgSFecInLabelRowStatus to
'createAndGo'.
An entry is deleted by setting vRtrLdpNgSFecInLabelRowStatus to
'destroy'."
::= { vRtrLdpNgStaticFecInLabelEntry 2 }
vRtrLdpNgSFecOperInLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSFecOperInLabel indicates the actual or
operational value of the label that was advertised to the upstream
peer."
::= { vRtrLdpNgStaticFecInLabelEntry 3 }
vRtrLdpNgStaticFecOutLabelTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgStaticFecOutLabelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgStaticFecOutLabelTable has an entry for each static prefix
FEC out label configured on the virtual router."
::= { tmnxLdpNgObjs 36 }
vRtrLdpNgStaticFecOutLabelEntry OBJECT-TYPE
SYNTAX VRtrLdpNgStaticFecOutLabelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a static prefix FEC out label configured on
the virtual router. The static prefix FEC corresponding to a in label
entry must exist as a row entry in the vRtrLdpNgStaticFecTable. For
vRtrLdpNgSFecOutLabelType 'pop' or 'swap' corresponding static FEC
Prefix row entry must exist in vRtrLdpNgStaticFecInLabelTable
Entries can be created and deleted via SNMP SET operations to
vRtrLdpNgSFecOutLabelRowStatus.
An entry is created by setting vRtrLdpNgSFecOutLabelRowStatus to
'createAndGo'.
An entry is deleted by setting vRtrLdpNgSFecOutLabelRowStatus to
'destroy'."
INDEX {
vRtrID,
vRtrLdpNgStaticFecIpPrefixType,
vRtrLdpNgStaticFecIpPrefix,
vRtrLdpNgStaticFecIpPrefixLen,
vRtrLdpNgSFecOutLabelType,
vRtrLdpNgSFecOutLabelIfName,
vRtrLdpNgSFecOutLabelIpAddrType,
vRtrLdpNgSFecOutLabelIpAddr
}
::= { vRtrLdpNgStaticFecOutLabelTable 1 }
VRtrLdpNgStaticFecOutLabelEntry ::= SEQUENCE
{
vRtrLdpNgSFecOutLabelType INTEGER,
vRtrLdpNgSFecOutLabelIfName DisplayString,
vRtrLdpNgSFecOutLabelIpAddrType InetAddressType,
vRtrLdpNgSFecOutLabelIpAddr InetAddress,
vRtrLdpNgSFecOutLabelRowStatus RowStatus,
vRtrLdpNgSFecOutLabel Unsigned32
}
vRtrLdpNgSFecOutLabelType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
pop (1),
push (2),
swap (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSFecOutLabelType indicates operation type of
this FEC."
::= { vRtrLdpNgStaticFecOutLabelEntry 1 }
vRtrLdpNgSFecOutLabelIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If vRtrLdpNgSFecOutLabelType is set to 'swap' or 'push', the value of
vRtrLdpNgSFecOutLabelIfName indicates the interface name to use for
this static fec prefix.
If vRtrLdpNgSFecOutLabelType is set to 'pop', the value of
vRtrLdpNgSFecOutLabelIfName will be a null string."
::= { vRtrLdpNgStaticFecOutLabelEntry 2 }
vRtrLdpNgSFecOutLabelIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSFecOutLabelIpAddrType indicates the IP address
type for vRtrLdpNgSFecOutLabelIpAddr."
::= { vRtrLdpNgStaticFecOutLabelEntry 3 }
vRtrLdpNgSFecOutLabelIpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If vRtrLdpNgSFecOutLabelType is set to 'swap' or 'push', the value of
vRtrLdpNgSFecOutLabelIpAddr indicates the IP address of the next-hop.
If vRtrLdpNgSFecOutLabelType is set to 'pop', the value of
vRtrLdpNgSFecOutLabelIpAddr will be 0.0.0.0"
::= { vRtrLdpNgStaticFecOutLabelEntry 4 }
vRtrLdpNgSFecOutLabelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrLdpNgSFecOutLabelRowStatus is used to create, delete or control
entries in the vRtrLdpNgStaticFecOutLabelTable.
An entry is created by setting vRtrLdpNgSFecOutLabelRowStatus to
'createAndGo'.
An entry is deleted by setting vRtrLdpNgSFecOutLabelRowStatus to
'destroy'."
::= { vRtrLdpNgStaticFecOutLabelEntry 5 }
vRtrLdpNgSFecOutLabel OBJECT-TYPE
SYNTAX Unsigned32 (16..1048575 | 4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSFecOutLabel specifies the egress label
associated with this next-hop entry. The LSR will swap the incoming
label with the configured egress label.
If the value of vRtrLdpNgSFecOutLabel is set to 4294967295, the LSR
will pop the incoming label."
DEFVAL { 4294967295 }
::= { vRtrLdpNgStaticFecOutLabelEntry 6 }
vRtrLdpNgTargPeerTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerTableLstCh indicates the last timestamp
when an entry in the vRtrLdpNgTargPeerTable was last changed."
::= { tmnxLdpNgObjs 37 }
vRtrLdpNgTargPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgTargPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgTargPeerTable provides an entry for each virtual router
targeted peer configured to be used with the Label Distribution
Protocol (LDP)."
::= { tmnxLdpNgObjs 38 }
vRtrLdpNgTargPeerEntry OBJECT-TYPE
SYNTAX VRtrLdpNgTargPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a targeted peer on this virtual router that
participates in the LDP protocol.
Row entries can be created or deleted via SNMP SET requests. A row
with default attribute values is created by setting
vRtrLdpNgTargPeerRowStatus to 'createAndGo'. A row entry can be
destroyed by setting vRtrLdpNgTargPeerRowStatus to 'destroy'."
INDEX {
vRtrID,
vRtrLdpNgPeerAddressType,
vRtrLdpNgPeerAddress
}
::= { vRtrLdpNgTargPeerTable 1 }
VRtrLdpNgTargPeerEntry ::= SEQUENCE
{
vRtrLdpNgPeerAddressType InetAddressType,
vRtrLdpNgPeerAddress InetAddress,
vRtrLdpNgTargPeerRowStatus RowStatus,
vRtrLdpNgTargPeerLastChange TimeStamp,
vRtrLdpNgTargPeerAdminState TmnxAdminState,
vRtrLdpNgTargPeerOperState TmnxOperState,
vRtrLdpNgTargPeerUpTime TimeInterval,
vRtrLdpNgTargPeerOperDownReason TmnxLdpIntTargOperDownReasonCode,
vRtrLdpNgTargPeerInheritance Unsigned32,
vRtrLdpNgTargPeerKAFactor TmnxLdpKeepAliveFactor,
vRtrLdpNgTargPeerKATimeout TmnxLdpNewKeepAliveTimeout,
vRtrLdpNgTargPeerHelloFactor TmnxLdpHelloFactor,
vRtrLdpNgTargPeerHelloTimeout TmnxLdpNewHelloTimeout,
vRtrLdpNgTargPeerOprHelloTimeout TmnxLdpNewHelloTimeout,
vRtrLdpNgTargPeerHelloReduction TruthValue,
vRtrLdpNgTargPeerHelloRdctnFctr Unsigned32,
vRtrLdpNgTargPeerBackoffTime TmnxLdpBackoffTime,
vRtrLdpNgTargPeerMaxBackoffTime TmnxLdpBackoffTime,
vRtrLdpNgTargPeerTunneling TruthValue,
vRtrLdpNgTargPeerBfdEnabled TruthValue,
vRtrLdpNgTargPeerLsrIfIndex InterfaceIndexOrZero,
vRtrLdpNgTargPeerAutoCreate TruthValue,
vRtrLdpNgTargPeerCreator INTEGER,
vRtrLdpNgTargPeerTemplName TNamedItemOrEmpty,
vRtrLdpNgTargPeerLocalIpAddrType InetAddressType,
vRtrLdpNgTargPeerLocalIpAddress InetAddress,
vRtrLdpNgTargPeer32BitLsrFormat TruthValue,
vRtrLdpNgTargPeerLsrIdAdvert TruthValue,
vRtrLdpNgTargPeerCommunity TPolicyStatementNameOrEmpty
}
vRtrLdpNgPeerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPeerAddressType specifies the address family
type for vRtrLdpNgPeerAddress."
::= { vRtrLdpNgTargPeerEntry 1 }
vRtrLdpNgPeerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgPeerAddress specifies the targeted peer IP address."
::= { vRtrLdpNgTargPeerEntry 2 }
vRtrLdpNgTargPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrLdpNgTargPeerRowStatus is used to control the creation and
deletion of rows in the vRtrLdpNgTargPeerTable.
A row can be created by setting vRtrLdpNgTargPeerRowStatus to
'createAndGo'. The agent should assign the default attribute values
and change the row status to 'active'.
A row entry can be destroyed by setting vRtrLdpNgTargPeerRowStatus to
'destroy'."
::= { vRtrLdpNgTargPeerEntry 3 }
vRtrLdpNgTargPeerLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerLastChange indicates the sysUpTime when
this row was last modified."
::= { vRtrLdpNgTargPeerEntry 4 }
vRtrLdpNgTargPeerAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerAdminState specifies the desired
administrative state for this LDP targeted peer."
DEFVAL { inService }
::= { vRtrLdpNgTargPeerEntry 5 }
vRtrLdpNgTargPeerOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerOperState indicates the current
operational state of LDP targeted peer."
::= { vRtrLdpNgTargPeerEntry 6 }
vRtrLdpNgTargPeerUpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerUpTime indicates the time, in hundreds
of seconds, that the targeted peer has been in current operational
state vRtrLdpNgTargPeerOperState.
If the value of vRtrLdpNgTargPeerOperState is 'inService (2)', then
vRtrLdpNgTargPeerUpTime specifies the time that the targeted peer has
been operationally up.
If the value of vRtrLdpNgTargPeerOperState is 'outOfService (3)', then
vRtrLdpNgTargPeerUpTime specifies the time that the targeted peer has
been operationally down.
If the value of vRtrLdpNgTargPeerOperState is 'transition (4)', then
vRtrLdpNgTargPeerUpTime specifies the time that the targeted peer has
been operationally in transition."
::= { vRtrLdpNgTargPeerEntry 7 }
vRtrLdpNgTargPeerOperDownReason OBJECT-TYPE
SYNTAX TmnxLdpIntTargOperDownReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerOperDownReason indicates the operational
down reason for targeted peer."
::= { vRtrLdpNgTargPeerEntry 8 }
vRtrLdpNgTargPeerInheritance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Some writable object in this row that can be configured to inherit its
value from its corresponding object in the vRtrLdpNgGeneralTable.
vRtrLdpNgTargPeerInheritance controls whether to inherit the
operational value of that object, or to use the administratively set
value.
Non mask bits will always have value of zero, and any attempt to
change the value will be silently discarded.
When the bit for an object has value of one, then the object's
administrative and operational value are whatever the DEFVAL or most
recently SET value. The mask bit(s) will be set to one when SET is
performed on the inherited object(s). Any attempt to set the mask bit
to one will be silently discarded.
When the bit for an object is set to zero, then the object's
administrative and operational value are inherited from the
corresponding object in vRtrLdpNgGeneralTable.
This object is a bit-mask, with the following positions:
vRtrLdpNgTargPeerKAFactor 0x1
vRtrLdpNgTargPeerKATimeout 0x2
vRtrLdpNgTargPeerHelloFactor 0x4
vRtrLdpNgTargPeerHelloTimeout 0x8
vRtrLdpNgTargPeerHelloReduction 0x10
vRtrLdpNgTargPeerHelloRdctnFctr 0x20"
DEFVAL { 0 }
::= { vRtrLdpNgTargPeerEntry 9 }
vRtrLdpNgTargPeerKAFactor OBJECT-TYPE
SYNTAX TmnxLdpKeepAliveFactor
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerKAFactor specifies the value by which
the keepalive timeout (vRtrLdpNgTargPeerKATimeout) should be divided
to give the keepalive time i.e. the time interval, in seconds, between
LDP keepalive messages. LDP keepalive messages are sent to keep the
LDP session from timing out when no other LDP traffic is being sent
between the neighbors."
DEFVAL { 4 }
::= { vRtrLdpNgTargPeerEntry 10 }
vRtrLdpNgTargPeerKATimeout OBJECT-TYPE
SYNTAX TmnxLdpNewKeepAliveTimeout
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerKATimeout specifies the time interval,
in seconds, that LDP waits before tearing down a session. If no LDP
messages are exchanged during this time interval, the LDP session is
torn down. Generally the value of vRtrLdpNgTargPeerKATimeout is
configured to be 3 times the keepalive time (the time interval between
successive LDP keepalive messages)."
DEFVAL { 40 }
::= { vRtrLdpNgTargPeerEntry 11 }
vRtrLdpNgTargPeerHelloFactor OBJECT-TYPE
SYNTAX TmnxLdpHelloFactor
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerHelloFactor specifies the value by which
the hello timeout (vRtrLdpNgTargPeerHelloTimeout) should be divided to
give the hello time i.e. the time interval, in seconds, between LDP
Hello messages. LDP uses hello messages to discover neighbors and to
detect loss of connectivity with its neighbors."
DEFVAL { 3 }
::= { vRtrLdpNgTargPeerEntry 12 }
vRtrLdpNgTargPeerHelloTimeout OBJECT-TYPE
SYNTAX TmnxLdpNewHelloTimeout
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerHelloTimeout specifies the hello time also
known as hold time. It is the time interval, in seconds, that LDP waits
before declaring a neighbor to be down. Hello timeout is local to the
system and is sent in the hello messages to a neighbor. Hello timeout
cannot be set to a value that is less than 3 times the hello time."
DEFVAL { 45 }
::= { vRtrLdpNgTargPeerEntry 13 }
vRtrLdpNgTargPeerOprHelloTimeout OBJECT-TYPE
SYNTAX TmnxLdpNewHelloTimeout (3..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerOprHelloTimeout indicates the
operational hello time also known as hold time used by the operational
targeted peer. It is the time interval that LDP waits before declaring
a neighbor to be down."
::= { vRtrLdpNgTargPeerEntry 14 }
vRtrLdpNgTargPeerHelloReduction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerHelloReduction specifies whether hello
reduction to this targeted peer is enabled or not. If enabled, the
sender advertises the dampened vRtrLdpNgTargPeerHelloTimeout, to the
targeted peer after LDP session is established."
DEFVAL { false }
::= { vRtrLdpNgTargPeerEntry 15 }
vRtrLdpNgTargPeerHelloRdctnFctr OBJECT-TYPE
SYNTAX Unsigned32 (3..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerHelloRdctnFctr specifies the number of
hello messages that are sent at consistent
vRtrLdpNgTargPeerHelloTimeout value before advertising further
dampened vRtrLdpNgTargPeerHelloTimeout.
An 'inconsistentValue' error is returned if this object is set when
vRtrLdpNgTargPeerHelloReduction is disabled."
DEFVAL { 3 }
::= { vRtrLdpNgTargPeerEntry 16 }
vRtrLdpNgTargPeerBackoffTime OBJECT-TYPE
SYNTAX TmnxLdpBackoffTime (1..2592000)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerBackoffTime specifies the initial value
for the backoff interval.
The backoff interval is the time, in seconds, that LDP waits after an
LDP session setup has failed before it attempts to setup the session
again. After the LDP session startup fails the first time, the backoff
interval is set to the value of vRtrLdpNgTargPeerBackoffTime.
Thereafter, if session startup fails again the backoff interval
increases exponentially."
::= { vRtrLdpNgTargPeerEntry 17 }
vRtrLdpNgTargPeerMaxBackoffTime OBJECT-TYPE
SYNTAX TmnxLdpBackoffTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerMaxBackoffTime specifies the maximum
value for the backoff interval.
For each successive failure of the LDP session startup, the backoff
interval (the time for which the router waits before retrying)
increases exponentially. If the backoff interval exceeds
vRtrLdpNgTargPeerMaxBackoffTime, the router will give up trying to
establish the LDP session.
If vRtrLdpNgTargPeerMaxBackoffTime has value of zero (0), then the
backoff interval does not increase exponentially after the first
session startup attempt fails. Instead it remains constant and LDP
will keep retrying to establish a session until it succeeds."
::= { vRtrLdpNgTargPeerEntry 18 }
vRtrLdpNgTargPeerTunneling OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerTunneling specifies whether tunneling of
unicast LDP FECs over tunnels is enabled. When this object has a value
of 'true', tunneling is enabled. When its value is 'false', tunneling
is disabled."
DEFVAL { false }
::= { vRtrLdpNgTargPeerEntry 19 }
vRtrLdpNgTargPeerBfdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerBfdEnabled specifies whether BFD
tracking is enabled to the transport address of this peering session.
When this object has a value of 'true', BFD tracking is enabled. When
its value is 'false', BFD tracking is disabled."
DEFVAL { false }
::= { vRtrLdpNgTargPeerEntry 20 }
vRtrLdpNgTargPeerLsrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerLsrIfIndex specifies the local interface
index that is to be used as source LSR-ID to establish targeted hello
adjacency with a LDP peer."
DEFVAL { 0 }
::= { vRtrLdpNgTargPeerEntry 21 }
vRtrLdpNgTargPeerAutoCreate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerAutoCreate indicates whether or not the
row entry was automatically created."
::= { vRtrLdpNgTargPeerEntry 22 }
vRtrLdpNgTargPeerCreator OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
template (2),
sdp (3),
autotx (4),
autorx (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerCreator indicates the creator of this
row.
A value of 'manual(1)' indicates the entry is created manually by the
user.
A value of 'template(2)' indicates the entry is auto created by
template configuration.
A value of 'sdp(3)' indicates the entry is auto created by service
manager.
A value of 'autotx(4)' indicates the entry is auto created for remote
LFA.
A value of 'autorx(5)' indicates the entry is auto created upon
reception of a targeted Hello message."
::= { vRtrLdpNgTargPeerEntry 23 }
vRtrLdpNgTargPeerTemplName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerTemplName specifies the template name
that created this row. This object has valid value when
vRtrLdpNgTargPeerCreator has value of template."
::= { vRtrLdpNgTargPeerEntry 24 }
vRtrLdpNgTargPeerLocalIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerLocalIpAddrType indicates the type of
address indicated by vRtrLdpNgTargPeerLocalIpAddress."
::= { vRtrLdpNgTargPeerEntry 25 }
vRtrLdpNgTargPeerLocalIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerLocalIpAddress indicates the local IP
address used in Hellos sent."
::= { vRtrLdpNgTargPeerEntry 26 }
vRtrLdpNgTargPeer32BitLsrFormat OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeer32BitLsrFormat specifies whether to use
32-bit address as source Label Switch Router identifier (LSR-ID) to
establish a targeted LDP adjacency with a LDP peer. This value can be
only be set to true if vRtrLdpNgTargPeerLsrIfIndex is set to non-zero
value and vRtrLdpNgPeerAddressType is ipv6."
DEFVAL { false }
::= { vRtrLdpNgTargPeerEntry 28 }
vRtrLdpNgTargPeerLsrIdAdvert OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerLsrIdAdvert is only relevant if
vRtrLdpNgTargPeerCreator in the same row has the value 'template'. If
that is the case, the value of vRtrLdpNgTargPeerLsrIdAdvert indicates
if the targeted-peer template which created this targeted peer is
configured to advertise the local-lsr-id as a FEC."
::= { vRtrLdpNgTargPeerEntry 29 }
vRtrLdpNgTargPeerCommunity OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerCommunity is only relevant if
vRtrLdpNgTargPeerCreator in the same row has the value 'template'. If
that is the case, the value of vRtrLdpNgTargPeerCommunity indicates
the community that has been configured on the targeted-peer template
associated with this targeted peer."
::= { vRtrLdpNgTargPeerEntry 30 }
vRtrLdpNgTargPeerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgTargPeerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgTargPeerStatsTable is a read-only table. The purpose of
this table is to keep statistical information about the Targeted peers
on the LSR.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vRtrLdpNgTargPeerTable, and the augmenting
table, vRtrLdpNgTargPeerStatsTable. This in effect extends the
vRtrLdpNgTargPeerTable with additional columns. Creation or deletion
of a row in the vRtrLdpNgTargPeerTable results in the same fate for
the row in the vRtrLdpNgTargPeerTable."
::= { tmnxLdpNgObjs 39 }
vRtrLdpNgTargPeerStatsEntry OBJECT-TYPE
SYNTAX VRtrLdpNgTargPeerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table contains statistical information about an LDP
Targeted peer.
Some counters contained in a row are for fatal errors received
during a former LDP Session associated with this entry. For example,
an LDP Pdu received on a TCP connection during an LDP Session
contains a fatal error. That error is counted here, because the
session is terminated.
If the error is NOT fatal (i.e. and the Session remains), then the
error is counted in the vRtrLdpNgSessionStatsEntry."
AUGMENTS { vRtrLdpNgTargPeerEntry }
::= { vRtrLdpNgTargPeerStatsTable 1 }
VRtrLdpNgTargPeerStatsEntry ::= SEQUENCE
{
vRtrLdpNgTargPeerStatExistingAdj Gauge32,
vRtrLdpNgTargPeerStatsHelloRecv Gauge32,
vRtrLdpNgTargPeerStatsHelloSent Gauge32,
vRtrLdpNgTargPeerStatsBadPduLen Gauge32,
vRtrLdpNgTargPeerStatsBadMsgLen Gauge32,
vRtrLdpNgTargPeerStatsMalformTlv Gauge32,
vRtrLdpNgTargPeerStatsBadProtVer Gauge32
}
vRtrLdpNgTargPeerStatExistingAdj OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerStatExistingAdj indicates a count of the
total active adjacencies with this targeted peer."
::= { vRtrLdpNgTargPeerStatsEntry 1 }
vRtrLdpNgTargPeerStatsHelloRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerStatsHelloRecv indicates number of Hello
messages received with this targeted peer."
::= { vRtrLdpNgTargPeerStatsEntry 2 }
vRtrLdpNgTargPeerStatsHelloSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerStatsHelloSent indicates the number of
Hello messages sent with this targeted peer."
::= { vRtrLdpNgTargPeerStatsEntry 3 }
vRtrLdpNgTargPeerStatsBadPduLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerStatsBadPduLen indicates the number of
bad PDU length errors detected with this targeted peer."
::= { vRtrLdpNgTargPeerStatsEntry 4 }
vRtrLdpNgTargPeerStatsBadMsgLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerStatsBadMsgLen indicates the number of
bad message length errors detected with this targeted peer."
::= { vRtrLdpNgTargPeerStatsEntry 5 }
vRtrLdpNgTargPeerStatsMalformTlv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"value of vRtrLdpNgTargPeerStatsMalformTlv indicates the number of
malformed TLV value errors detected with this targeted peer."
::= { vRtrLdpNgTargPeerStatsEntry 6 }
vRtrLdpNgTargPeerStatsBadProtVer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargPeerStatsBadProtVer indicates the number of
bad protocol version errors detected with this targeted peer."
::= { vRtrLdpNgTargPeerStatsEntry 7 }
vRtrLdpNgInetIfTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfTableLstCh indicates the last timestamp
when an entry in the vRtrLdpNgInetIfTable was last changed."
::= { tmnxLdpNgObjs 40 }
vRtrLdpNgInetIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgInetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgInetIfTable provides an entry for each virtual router
interface configuration to be used with the Label Distribution
Protocol (LDP) for a given Inet address family."
::= { tmnxLdpNgObjs 41 }
vRtrLdpNgInetIfEntry OBJECT-TYPE
SYNTAX VRtrLdpNgInetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an interface on this virtual router that
participates in the LDP protocol for a given Inet address family.
Corresponding interface entry must exist in vRtrLdpNgIfTable before
creating an entry in this table.
Row entries can be created or deleted via SNMP SET requests. A row
with default attribute values is created by setting
vRtrLdpNgInetIfRowStatus to 'createAndGo'. A row entry can be destroyed
by setting vRtrLdpNgInetIfRowStatus to 'destroy'."
INDEX {
vRtrID,
vRtrLdpNgIfIndex,
vRtrLdpNgIfAddrType
}
::= { vRtrLdpNgInetIfTable 1 }
VRtrLdpNgInetIfEntry ::= SEQUENCE
{
vRtrLdpNgIfAddrType InetVersion,
vRtrLdpNgInetIfRowStatus RowStatus,
vRtrLdpNgInetIfUpTime TimeInterval,
vRtrLdpNgInetIfLastChange TimeStamp,
vRtrLdpNgInetIfAdminState TmnxAdminState,
vRtrLdpNgInetIfOperState TmnxOperState,
vRtrLdpNgInetIfOperDownReason TmnxLdpIntTargOperDownReasonCode,
vRtrLdpNgInetIfInheritance Integer32,
vRtrLdpNgInetIfKAFactor TmnxLdpKeepAliveFactor,
vRtrLdpNgInetIfKATimeout TmnxLdpNewKeepAliveTimeout,
vRtrLdpNgInetIfHelloFactor TmnxLdpHelloFactor,
vRtrLdpNgInetIfHelloTimeout TmnxLdpNewHelloTimeout,
vRtrLdpNgInetIfOperHelloTimeout TmnxLdpNewHelloTimeout,
vRtrLdpNgInetIfBackoffTime TmnxLdpBackoffTime,
vRtrLdpNgInetIfMaxBackoffTime TmnxLdpBackoffTime,
vRtrLdpNgInetIfTransAddrType INTEGER,
vRtrLdpNgInetIfLsrIfType INTEGER,
vRtrLdpNgInetIfLsrIfIndex InterfaceIndexOrZero,
vRtrLdpNgInetIfIPv4P2MPFecCap TmnxEnabledDisabled,
vRtrLdpNgInetIfIPv6P2MPFecCap TmnxEnabledDisabled,
vRtrLdpNgInetIfIPv4PfxFecCap TmnxEnabledDisabled,
vRtrLdpNgInetIfIPv6PfxFecCap TmnxEnabledDisabled,
vRtrLdpNgInetIfLocalIpAddrType InetAddressType,
vRtrLdpNgInetIfLocalIpAddress InetAddress,
vRtrLdpNgInetIf32BitLsrFormat TruthValue
}
vRtrLdpNgIfAddrType OBJECT-TYPE
SYNTAX InetVersion
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgIfAddrType indicates the Inet address family of this
interface."
::= { vRtrLdpNgInetIfEntry 1 }
vRtrLdpNgInetIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrLdpNgInetIfRowStatus is used to control the creation and deletion
of rows in the vRtrLdpNgInetIfTable.
A row can be created by setting vRtrLdpNgIfRowStatus to 'createAndGo'.
The agent should assign the default attribute values and change the
row status to 'active'. Corresponding interface entry must exit in
vRtrLdpNgIfTable before creating an entry in this table.
A row entry can be destroyed by setting vRtrLdpNgInetIfRowStatus to
'destroy'."
::= { vRtrLdpNgInetIfEntry 2 }
vRtrLdpNgInetIfUpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfUpTime indicates the time, in hundreds of
seconds, that the LDP interface has been in current operational state
vRtrLdpNgIfOperState.
If the value of vRtrLdpNgIfOperState is 'inService (2)', then
vRtrLdpNgInetIfUpTime specifies the time that the LDP interface has
been operationally up.
If the value of vRtrLdpNgIfOperState is 'outOfService (3)', then
vRtrLdpNgInetIfUpTime specifies the time that the LDP interface has
been operationally down.
If the value of vRtrLdpNgIfOperState is 'transition (4)', then
vRtrLdpNgInetIfUpTime specifies the time that the LDP interface has
been operationally in transition."
::= { vRtrLdpNgInetIfEntry 3 }
vRtrLdpNgInetIfLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfLastChange indicates the sysUpTime when
this row was last modified."
::= { vRtrLdpNgInetIfEntry 4 }
vRtrLdpNgInetIfAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfAdminState specifies the desired
administrative state for this interface."
DEFVAL { inService }
::= { vRtrLdpNgInetIfEntry 5 }
vRtrLdpNgInetIfOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfOperState indicates the current
operational state of this interface."
::= { vRtrLdpNgInetIfEntry 6 }
vRtrLdpNgInetIfOperDownReason OBJECT-TYPE
SYNTAX TmnxLdpIntTargOperDownReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfOperDownReason indicates the reason that
the LDP interface is operationally down."
::= { vRtrLdpNgInetIfEntry 7 }
vRtrLdpNgInetIfInheritance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Some writable object in this row that can be configured to inherit its
value from its corresponding object in the vRtrLdpNgGeneralTable.
vRtrLdpIfInheritance controls whether to inherit the operational value
of that object, or use the administratively set value.
Non mask bits will always have value of zero, and any attempt to
change the value will be silently discarded.
When the bit for an object has value of one, then the object's
administrative and operational value are whatever the DEFVAL or most
recently SET value. The mask bit(s) will be set to one when set is
performed on the inherited object(s). Any attempt to set the mask bit
to one will be silently discarded.
When the bit for an object is set to zero, then the object's
administrative and operational value are inherited from the
corresponding object in vRtrLdpNgGeneralTable.
This object is a bit-mask, with the following positions:
vRtrLdpNgInetIfKAFactor 0x1
vRtrLdpNgInetIfKATimeout 0x2
vRtrLdpNgInetIfHelloFactor 0x4
vRtrLdpNgInetIfHelloTimeout 0x8
vRtrLdpNgInetIfTransAddrType 0x10"
DEFVAL { 0 }
::= { vRtrLdpNgInetIfEntry 8 }
vRtrLdpNgInetIfKAFactor OBJECT-TYPE
SYNTAX TmnxLdpKeepAliveFactor
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfKAFactor specifies the value by which the
keepalive timeout (vRtrLdpNgInetIfKATimeout) should be divided to give
the keepalive time i.e. the time interval, in seconds, between LDP
keepalive messages. LDP keepalive messages are sent to keep the LDP
session from timing out when no other LDP traffic is being sent
between the neighbors."
DEFVAL { 3 }
::= { vRtrLdpNgInetIfEntry 9 }
vRtrLdpNgInetIfKATimeout OBJECT-TYPE
SYNTAX TmnxLdpNewKeepAliveTimeout
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfKATimeout specifies the time interval, in
seconds, that LDP waits before tearing down a session. If no LDP
messages are exchanged during this time interval, the LDP session is
torn down. Generally the value of vRtrLdpNgInetIfKATimeout is
configured to be 3 times the keepalive time (the time interval between
successive LDP keepalive messages)."
DEFVAL { 30 }
::= { vRtrLdpNgInetIfEntry 10 }
vRtrLdpNgInetIfHelloFactor OBJECT-TYPE
SYNTAX TmnxLdpHelloFactor
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfHelloFactor specifies the value by which
the hello timeout (vRtrLdpNgInetIfHelloTimeout) should be divided to
give the hello time i.e. the time interval, in seconds, between LDP
Hello messages. LDP uses hello messages to discover neighbors and to
detect loss of connectivity with its neighbors."
DEFVAL { 3 }
::= { vRtrLdpNgInetIfEntry 11 }
vRtrLdpNgInetIfHelloTimeout OBJECT-TYPE
SYNTAX TmnxLdpNewHelloTimeout
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfHelloTimeout specifies the hello time also
known as hold time. It is the time interval, in seconds, that LDP
waits before declaring a neighbor to be down. Hello timeout is local
to the system and is sent in the hello messages to a neighbor. Hello
timeout cannot be set to a value that is less than 3 times the hello
time."
DEFVAL { 15 }
::= { vRtrLdpNgInetIfEntry 12 }
vRtrLdpNgInetIfOperHelloTimeout OBJECT-TYPE
SYNTAX TmnxLdpNewHelloTimeout (3..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfOperHelloTimeout indicates the operational
hello time also known as hold time used by the operational LDP
interface. It is the time interval that LDP waits before declaring a
neighbor to be down."
::= { vRtrLdpNgInetIfEntry 13 }
vRtrLdpNgInetIfBackoffTime OBJECT-TYPE
SYNTAX TmnxLdpBackoffTime (1..2592000)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfBackoffTime indicates the initial value
for the backoff interval.
The backoff interval is the time, in seconds, that LDP waits after an
LDP session setup has failed before it attempts to setup the session
again. After the LDP session startup fails the first time, the backoff
interval is set to the value of vRtrLdpNgInetIfBackoffTime.
Thereafter, if session startup fails again the backoff interval
increases exponentially."
::= { vRtrLdpNgInetIfEntry 14 }
vRtrLdpNgInetIfMaxBackoffTime OBJECT-TYPE
SYNTAX TmnxLdpBackoffTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfMaxBackoffTime specifies the maximum value
for the backoff interval.
For each successive failure of the LDP session startup, the backoff
interval (the time for which the router waits before retrying)
increases exponentially. If the backoff interval exceeds
vRtrLdpNgInetIfMaxBackoffTime, the router will give up trying to
establish the LDP session."
::= { vRtrLdpNgInetIfEntry 15 }
vRtrLdpNgInetIfTransAddrType OBJECT-TYPE
SYNTAX INTEGER {
interface (1),
system (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfTransAddrType specifies the source of the
transport address to be used when setting up the LDP TCP sessions.
The interface's IP address is used to setup the LDP session between
neighbors. If multiple interfaces exist between two neighbors, the
'interface' mode cannot be used since only one LDP session is actually
set up between the two neighbors.
When the value of this object is 'system', the system's IP address is
used to set up the LDP session between neighbors."
DEFVAL { system }
::= { vRtrLdpNgInetIfEntry 16 }
vRtrLdpNgInetIfLsrIfType OBJECT-TYPE
SYNTAX INTEGER {
system (1),
interface (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfLsrIfType specifies whether the local
interface address or the system interface address should be used as
source Label Switch Router identifier (LSR-ID) to establish a link LDP
adjacency with a LDP peer"
DEFVAL { system }
::= { vRtrLdpNgInetIfEntry 17 }
vRtrLdpNgInetIfLsrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfLsrIfIndex specifies the local interface
index that is to be used as source LSR-ID to establish link hello
adjacency with a LDP peer."
DEFVAL { 0 }
::= { vRtrLdpNgInetIfEntry 18 }
vRtrLdpNgInetIfIPv4P2MPFecCap OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfIPv4P2MPFecCap specifies whether traffic
exchange for IPv4 P2MP FECs is enabled or disabled on this interface."
DEFVAL { enabled }
::= { vRtrLdpNgInetIfEntry 19 }
vRtrLdpNgInetIfIPv6P2MPFecCap OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfIPv6P2MPFecCap specifies whether traffic
exchange for IPv6 P2MP FECs is enabled or disabled on this interface."
DEFVAL { enabled }
::= { vRtrLdpNgInetIfEntry 20 }
vRtrLdpNgInetIfIPv4PfxFecCap OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfIPv4PfxFecCap specifies whether traffic
exchange for IPv4 prefix FECs is enabled or disabled on this
interface."
DEFVAL { enabled }
::= { vRtrLdpNgInetIfEntry 21 }
vRtrLdpNgInetIfIPv6PfxFecCap OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfIPv6PfxFecCap specifies whether traffic
exchange for IPv6 prefix FECs is enabled or disabled this interface."
DEFVAL { enabled }
::= { vRtrLdpNgInetIfEntry 22 }
vRtrLdpNgInetIfLocalIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfLocalIpAddrType indicates the type of
address indicated by vRtrLdpNgInetIfLocalIpAddress."
::= { vRtrLdpNgInetIfEntry 23 }
vRtrLdpNgInetIfLocalIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIfLocalIpAddress indicates the local IP
address used in Hellos sent."
::= { vRtrLdpNgInetIfEntry 24 }
vRtrLdpNgInetIf32BitLsrFormat OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInetIf32BitLsrFormat specifies whether to use
32-bit address as source Label Switch Router identifier (LSR-ID) to
establish a link LDP adjacency with a LDP peer. This value can be only
be set to true if vRtrLdpNgInetIfLsrIfType is 'interface' or
vRtrLdpNgInetIfLsrIfIndex is set to non-zero value and
vRtrLdpNgIfAddrType is ipv6."
DEFVAL { false }
::= { vRtrLdpNgInetIfEntry 25 }
vLdpNgStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vLdpNgStatsTable is a read-only table. The purpose of this table is to
keep statistical information about an LDP Instance.
Use of AUGMENTS clause implies a one-to-one dependent
relationship between the base table, vRtrLdpNgGeneralTable,
and the augmenting table, vLdpNgStatsTable. This in
effect extends the vRtrLdpNgGeneralTable with additional
columns. Creation or deletion of a row in the
vRtrLdpNgGeneralTable results in the same fate for the row
in the vLdpNgStatsTable."
::= { tmnxLdpNgObjs 42 }
vLdpNgStatsEntry OBJECT-TYPE
SYNTAX VLdpNgStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents statistical information about an LDP
instance."
AUGMENTS { vRtrLdpNgGeneralEntry }
::= { vLdpNgStatsTable 1 }
VLdpNgStatsEntry ::= SEQUENCE
{
vLdpNgStatsIPv4OperDownEvents Counter32,
vLdpNgStatsIPv6OperDownEvents Counter32,
vLdpNgStatsIPv4ActiveSess Gauge32,
vLdpNgStatsIPv6ActiveSess Gauge32,
vLdpNgStatsIPv4ActiveLinkAdj Gauge32,
vLdpNgStatsIPv6ActiveLinkAdj Gauge32,
vLdpNgStatsIPv4ActiveTargAdj Gauge32,
vLdpNgStatsIPv6ActiveTargAdj Gauge32,
vLdpNgStatsIPv4ActiveIf Gauge32,
vLdpNgStatsIPv6ActiveIf Gauge32,
vLdpNgStatsIPv4InactiveIf Gauge32,
vLdpNgStatsIPv6InactiveIf Gauge32,
vLdpNgStatsIPv4ActiveTargPeers Gauge32,
vLdpNgStatsIPv6ActiveTargPeers Gauge32,
vLdpNgStatsIPv4InactiveTargPeers Gauge32,
vLdpNgStatsIPv6InactiveTargPeers Gauge32,
vLdpNgStatsIPv4PfxFecRecv Gauge32,
vLdpNgStatsIPv6PfxFecRecv Gauge32,
vLdpNgStatsIPv4PfxFecSent Gauge32,
vLdpNgStatsIPv6PfxFecSent Gauge32,
vLdpNgStatsFec128FecSent Gauge32,
vLdpNgStatsFec128FecRecv Gauge32,
vLdpNgStatsFec129FecSent Gauge32,
vLdpNgStatsFec129FecRecv Gauge32,
vLdpNgStatsIPv4AttemptedSessions Counter32,
vLdpNgStatsIPv6AttemptedSessions Counter32,
vLdpNgStatsSessRejNoHelloErrs Counter32,
vLdpNgStatsSessRejAdvErrors Counter32,
vLdpNgStatsSessRejMaxPduErrs Counter32,
vLdpNgStatsSessRejLblRngeErrs Counter32,
vLdpNgStatsBadLdpIdErrors Counter32,
vLdpNgStatsBadPduLengthErrors Counter32,
vLdpNgStatsBadMsgLengthErrors Counter32,
vLdpNgStatsBadTlvLengthErrors Counter32,
vLdpNgStatsMalformedTlvErrors Counter32,
vLdpNgStatsKeepAliveExpErrors Counter32,
vLdpNgStatsShutdownNotifRecv Counter32,
vLdpNgStatsShutdownNotifSent Counter32,
vLdpNgStatsIPv4EgrFecPfxCount Counter32,
vLdpNgStatsIPv6EgrFecPfxCount Counter32,
vLdpNgStatsUnknownTlvErrors Counter32,
vLdpNgStatsIPv4P2MPFecSent Gauge32,
vLdpNgStatsIPv6P2MPFecSent Gauge32,
vLdpNgStatsIPv4P2MPFecRecv Gauge32,
vLdpNgStatsIPv6P2MPFecRecv Gauge32,
vLdpNgStatsIPv4PfxFecOLSessSent Gauge32,
vLdpNgStatsIPv6PfxFecOLSessSent Gauge32,
vLdpNgStatsIPv4PfxFecOLSessRecv Gauge32,
vLdpNgStatsIPv6PfxFecOLSessRecv Gauge32,
vLdpNgStatsIPv4P2MPFecOLSessSent Gauge32,
vLdpNgStatsIPv6P2MPFecOLSessSent Gauge32,
vLdpNgStatsIPv4P2MPFecOLSessRecv Gauge32,
vLdpNgStatsIPv6P2MPFecOLSessRecv Gauge32,
vLdpNgStatsFec128FecOLSessSent Gauge32,
vLdpNgStatsFec128FecOLSessRecv Gauge32,
vLdpNgStatsFec129FecOLSessSent Gauge32,
vLdpNgStatsFec129FecOLSessRecv Gauge32,
vLdpNgStatsIPv4OLoadInterfaces Gauge32,
vLdpNgStatsIPv6OLoadInterfaces Gauge32,
vLdpNgStatsIPv4OLoadTargPeers Gauge32,
vLdpNgStatsIPv6OLoadTargPeers Gauge32,
vLdpNgStatsIPv4PfxFecInOLoad Gauge32,
vLdpNgStatsIPv6PfxFecInOLoad Gauge32,
vLdpNgStatsIPv4P2MPFecInOLoad Gauge32,
vLdpNgStatsIPv6P2MPFecInOLoad Gauge32,
vLdpNgStatsFec128FecInOLoad Gauge32,
vLdpNgStatsFec129FecInOLoad Gauge32,
vLdpNgStatsBadProtVersionErrors Gauge32
}
vLdpNgStatsIPv4OperDownEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4OperDownEvents indicates the number of
times the IPv4 LDP instance has gone operationally down since the
instance was created."
::= { vLdpNgStatsEntry 1 }
vLdpNgStatsIPv6OperDownEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6OperDownEvents indicates the number of
times the IPv6 LDP instance has gone operationally down since the
instance was created."
::= { vLdpNgStatsEntry 2 }
vLdpNgStatsIPv4ActiveSess OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4ActiveSess indicates the number of active
IPv4 sessions (i.e. session in some form of creation) associated with
the LDP instance."
::= { vLdpNgStatsEntry 3 }
vLdpNgStatsIPv6ActiveSess OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6ActiveSess indicates the number of active
IPv6 sessions (i.e. session in some form of creation) associated with
the LDP instance."
::= { vLdpNgStatsEntry 4 }
vLdpNgStatsIPv4ActiveLinkAdj OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4ActiveLinkAdj indicates the number of
active IPv4 link adjacencies (i.e. established adjacencies) associated
with the LDP instance."
::= { vLdpNgStatsEntry 5 }
vLdpNgStatsIPv6ActiveLinkAdj OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6ActiveLinkAdj indicates the number of
active IPv6 link adjacencies (i.e. established adjacencies) associated
with the LDP instance."
::= { vLdpNgStatsEntry 6 }
vLdpNgStatsIPv4ActiveTargAdj OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4ActiveTargAdj indicates the number of
active IPv4 target adjacencies (i.e. established sessions) associated
with the LDP instance."
::= { vLdpNgStatsEntry 7 }
vLdpNgStatsIPv6ActiveTargAdj OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6ActiveTargAdj indicates the number of
active IPv6 target adjacencies (i.e. established sessions) associated
with the LDP instance."
::= { vLdpNgStatsEntry 8 }
vLdpNgStatsIPv4ActiveIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4ActiveIf indicates the number of active
(i.e. operationally up) IPv4 interfaces associated with the LDP
instance."
::= { vLdpNgStatsEntry 9 }
vLdpNgStatsIPv6ActiveIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6ActiveIf indicates the number of active
(i.e. operationally up) IPv6 interfaces associated with the LDP
instance."
::= { vLdpNgStatsEntry 10 }
vLdpNgStatsIPv4InactiveIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4InactiveIf indicates the number of
inactive (i.e. operationally down) IPv4 interfaces associated with the
LDP instance."
::= { vLdpNgStatsEntry 11 }
vLdpNgStatsIPv6InactiveIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6InactiveIf indicates the number of
inactive (i.e. operationally down) IPv6 interfaces associated with the
LDP instance."
::= { vLdpNgStatsEntry 12 }
vLdpNgStatsIPv4ActiveTargPeers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4ActiveTargPeers indicates the number of
configured IPv4 targeted peers that are administratively up in an LDP
instance."
::= { vLdpNgStatsEntry 13 }
vLdpNgStatsIPv6ActiveTargPeers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6ActiveTargPeers indicates the number of
configured IPv6 targeted peers that are administratively up in an LDP
instance."
::= { vLdpNgStatsEntry 14 }
vLdpNgStatsIPv4InactiveTargPeers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4InactiveTargPeers indicates the number of
inactive (i.e. operationally down) IPv4 targeted sessions associated
with the LDP instance."
::= { vLdpNgStatsEntry 15 }
vLdpNgStatsIPv6InactiveTargPeers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6InactiveTargPeers indicates the number of
inactive (i.e. operationally down) IPv6 targeted sessions associated
with the LDP instance."
::= { vLdpNgStatsEntry 16 }
vLdpNgStatsIPv4PfxFecRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4PfxFecRecv indicates the number of IPv4
Address FECs received by the LDP instance from its neighbors."
::= { vLdpNgStatsEntry 17 }
vLdpNgStatsIPv6PfxFecRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6PfxFecRecv indicates the number of IPv6
Address FECs received by the LDP instance from its neighbors."
::= { vLdpNgStatsEntry 18 }
vLdpNgStatsIPv4PfxFecSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4PfxFecSent indicates the number of IPv4
Address FECs sent by the LDP instance to its neighbors."
::= { vLdpNgStatsEntry 19 }
vLdpNgStatsIPv6PfxFecSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6PfxFecSent indicates the number of IPv6
Address FECs sent by the LDP instance to its neighbors."
::= { vLdpNgStatsEntry 20 }
vLdpNgStatsFec128FecSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec128FecSent indicates the number of Pseudo
wire ID FECs sent by the LDP instance to its neighbors."
::= { vLdpNgStatsEntry 21 }
vLdpNgStatsFec128FecRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec128FecRecv indicates the number of Pseudo
wire ID FECs received by the LDP instance from its neighbors."
::= { vLdpNgStatsEntry 22 }
vLdpNgStatsFec129FecSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec129FecSent indicates the number of General
Pseudo wire ID FECs sent by the LDP instance to its neighbors."
::= { vLdpNgStatsEntry 23 }
vLdpNgStatsFec129FecRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec129FecRecv indicates the number of General
Pseudo wire ID FECs received by the LDP instance from its neighbors."
::= { vLdpNgStatsEntry 24 }
vLdpNgStatsIPv4AttemptedSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4AttemptedSessions indicates the total
number of attempted IPv4 sessions for this LDP instance."
::= { vLdpNgStatsEntry 25 }
vLdpNgStatsIPv6AttemptedSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6AttemptedSessions indicates the total
number of attempted IPv6 sessions for this LDP instance."
::= { vLdpNgStatsEntry 26 }
vLdpNgStatsSessRejNoHelloErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsSessRejNoHelloErrs gives the total number of
Session Rejected/No Hello Error Notification Messages sent or received
by this LDP instance."
::= { vLdpNgStatsEntry 27 }
vLdpNgStatsSessRejAdvErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsSessRejAdvErrors gives the total number of
Session Rejected/Parameters Advertisement Mode Error Notification
Messages sent or received by this LDP instance."
::= { vLdpNgStatsEntry 28 }
vLdpNgStatsSessRejMaxPduErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsSessRejMaxPduErrs gives the total number of
Session Rejected/Parameters Max Pdu Length Error Notification Messages
sent or received by this LDP instance."
::= { vLdpNgStatsEntry 29 }
vLdpNgStatsSessRejLblRngeErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsSessRejLblRngeErrs gives the total number of
Session Rejected/Parameters Label Range Error Notification Messages
sent or received by this LDP instance."
::= { vLdpNgStatsEntry 30 }
vLdpNgStatsBadLdpIdErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsBadLdpIdErrors gives the number of Bad LDP
Identifier Fatal Errors detected for sessions associated with this LDP
instance."
REFERENCE
"LDP Specification, Section 3.5.1.2."
::= { vLdpNgStatsEntry 31 }
vLdpNgStatsBadPduLengthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsBadPduLengthErrors gives the number of Bad Pdu
Length Fatal Errors detected for sessions associated with this LDP
instance."
REFERENCE
"LDP Specification, Section 3.5.1.2."
::= { vLdpNgStatsEntry 32 }
vLdpNgStatsBadMsgLengthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsBadMsgLengthErrors gives the number of Bad
Message Length Fatal Errors detected for sessions associated with this
LDP instance."
REFERENCE
"LDP Specification, Section 3.5.1.2."
::= { vLdpNgStatsEntry 33 }
vLdpNgStatsBadTlvLengthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsBadTlvLengthErrors gives the number of Bad TLV
Length Fatal Errors detected for sessions associated with this LDP
instance."
REFERENCE
"LDP Specification, Section 3.5.1.2."
::= { vLdpNgStatsEntry 34 }
vLdpNgStatsMalformedTlvErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsMalformedTlvErrors gives the number of
Malformed TLV Value Fatal Errors detected for sessions associated with
this LDP instance."
REFERENCE
"LDP Specification, Section 3.5.1.2."
::= { vLdpNgStatsEntry 35 }
vLdpNgStatsKeepAliveExpErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsKeepAliveExpErrors gives the number of Session
Keep Alive Timer Expired Errors detected for sessions associated with
this LDP instance."
REFERENCE
"LDP Specification, Section 3.5.1.2."
::= { vLdpNgStatsEntry 36 }
vLdpNgStatsShutdownNotifRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsShutdownNotifRecv gives the number of Shutdown
Notifications received related to sessions associated with this LDP
instance."
::= { vLdpNgStatsEntry 37 }
vLdpNgStatsShutdownNotifSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsShutdownNotifSent gives the number of Shutdown
Notifications sent related to sessions associated with this LDP
instance."
::= { vLdpNgStatsEntry 38 }
vLdpNgStatsIPv4EgrFecPfxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4EgrFecPfxCount indicates the number of
IPv4 egress FEC prefix statistics configured for this LDP instance."
::= { vLdpNgStatsEntry 39 }
vLdpNgStatsIPv6EgrFecPfxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6EgrFecPfxCount indicates the number of
IPv6 egress FEC prefix statistics configured for this LDP instance."
::= { vLdpNgStatsEntry 40 }
vLdpNgStatsUnknownTlvErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsUnknownTlvErrors indicates the number of
Unknown TLV Fatal Errors detected for sessions associated with this
LDP instance."
REFERENCE
"LDP Specification, Section 3.5.1.2."
::= { vLdpNgStatsEntry 41 }
vLdpNgStatsIPv4P2MPFecSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4P2MPFecSent indicates the number of IPv4
P2MP FECs sent by the LDP instance to its neighbors."
::= { vLdpNgStatsEntry 42 }
vLdpNgStatsIPv6P2MPFecSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6P2MPFecSent indicates the number of IPv6
P2MP FECs sent by the LDP instance to its neighbors."
::= { vLdpNgStatsEntry 43 }
vLdpNgStatsIPv4P2MPFecRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4P2MPFecRecv indicates the number of IPv4
P2MP FECs received by the LDP instance from its neighbors."
::= { vLdpNgStatsEntry 44 }
vLdpNgStatsIPv6P2MPFecRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6P2MPFecRecv indicates the number of IPv6
P2MP FECs received by the LDP instance from its neighbors."
::= { vLdpNgStatsEntry 45 }
vLdpNgStatsIPv4PfxFecOLSessSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4PfxFecOLSessSent indicates the number of
Overload Notifications sent for IPv4 address FEC over sessions in LDP
instance."
::= { vLdpNgStatsEntry 46 }
vLdpNgStatsIPv6PfxFecOLSessSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6PfxFecOLSessSent indicates the number of
Overload Notifications sent for IPv6 address FEC over sessions in LDP
instance."
::= { vLdpNgStatsEntry 47 }
vLdpNgStatsIPv4PfxFecOLSessRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4PfxFecOLSessRecv indicates the number of
Overload Notifications received for IPv4 address FEC over sessions in
LDP instance."
::= { vLdpNgStatsEntry 48 }
vLdpNgStatsIPv6PfxFecOLSessRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6PfxFecOLSessRecv indicates the number of
Overload Notifications received for IPv6 address FEC over sessions in
LDP instance."
::= { vLdpNgStatsEntry 49 }
vLdpNgStatsIPv4P2MPFecOLSessSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4P2MPFecOLSessSent indicates the number of
Overload Notifications sent for IPv4 P2MP FEC over sessions in LDP
instance."
::= { vLdpNgStatsEntry 50 }
vLdpNgStatsIPv6P2MPFecOLSessSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6P2MPFecOLSessSent indicates the number of
Overload Notifications sent for IPv6 P2MP FEC over sessions in LDP
instance."
::= { vLdpNgStatsEntry 51 }
vLdpNgStatsIPv4P2MPFecOLSessRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4P2MPFecOLSessRecv indicates the number of
Overload Notifications received for IPv4 P2MP FEC over sessions in LDP
instance."
::= { vLdpNgStatsEntry 52 }
vLdpNgStatsIPv6P2MPFecOLSessRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6P2MPFecOLSessRecv indicates the number of
Overload Notifications received for IPv6 P2MP FEC over sessions in LDP
instance."
::= { vLdpNgStatsEntry 53 }
vLdpNgStatsFec128FecOLSessSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec128FecOLSessSent indicates the number of
Overload Notifications sent for PW ID FEC over sessions in LDP
instance."
::= { vLdpNgStatsEntry 54 }
vLdpNgStatsFec128FecOLSessRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec128FecOLSessRecv indicates the number of
Overload Notifications received for PW ID FEC over sessions in LDP
instance."
::= { vLdpNgStatsEntry 55 }
vLdpNgStatsFec129FecOLSessSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec129FecOLSessSent indicates the number of
Overload Notifications sent for General PW ID FEC over sessions in LDP
instance."
::= { vLdpNgStatsEntry 56 }
vLdpNgStatsFec129FecOLSessRecv OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec129FecOLSessRecv indicates the number of
Overload Notifications received for General PW ID FEC over sessions in
LDP instance."
::= { vLdpNgStatsEntry 57 }
vLdpNgStatsIPv4OLoadInterfaces OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4OLoadInterfaces indicates the number of
overloaded IPv4 interfaces in LDP instance."
::= { vLdpNgStatsEntry 58 }
vLdpNgStatsIPv6OLoadInterfaces OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6OLoadInterfaces indicates the number of
overloaded IPv6 interfaces in LDP instance."
::= { vLdpNgStatsEntry 59 }
vLdpNgStatsIPv4OLoadTargPeers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4OLoadTargPeers indicates the number of
overloaded IPv4 targeted peers in LDP instance."
::= { vLdpNgStatsEntry 60 }
vLdpNgStatsIPv6OLoadTargPeers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6OLoadTargPeers indicates the number of
overloaded IPv6 targeted peers in LDP instance."
::= { vLdpNgStatsEntry 61 }
vLdpNgStatsIPv4PfxFecInOLoad OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4PfxFecInOLoad indicates the number IPv4
Address FEC in overload state in LDP instance."
::= { vLdpNgStatsEntry 62 }
vLdpNgStatsIPv6PfxFecInOLoad OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6PfxFecInOLoad indicates the number IPv6
Address FEC in overload state in LDP instance."
::= { vLdpNgStatsEntry 63 }
vLdpNgStatsIPv4P2MPFecInOLoad OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv4P2MPFecInOLoad indicates the number IPv4
P2MP FEC in overload state in LDP instance."
::= { vLdpNgStatsEntry 64 }
vLdpNgStatsIPv6P2MPFecInOLoad OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsIPv6P2MPFecInOLoad indicates the number IPv4
P2MP FEC in overload state in LDP instance."
::= { vLdpNgStatsEntry 65 }
vLdpNgStatsFec128FecInOLoad OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec128FecInOLoad indicates the number PW ID
FEC in overload state in LDP instance."
::= { vLdpNgStatsEntry 66 }
vLdpNgStatsFec129FecInOLoad OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsFec129FecInOLoad indicates the number General
PW ID FEC in overload state in LDP instance."
::= { vLdpNgStatsEntry 67 }
vLdpNgStatsBadProtVersionErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgStatsBadProtVersionErrors indicates the number of
bad protocol version errors detected for sessions associated with this
LDP instance."
::= { vLdpNgStatsEntry 68 }
vRtrLdpNgCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgCapabilityTable is a read-only table. The purpose of this
table is to keep capability information about an LDP Instance.
Use of AUGMENTS clause implies a one-to-one dependent
relationship between the base table, vRtrLdpNgGeneralTable,
and the augmenting table, vRtrLdpNgCapabilityTable. This in
effect extends the vRtrLdpNgGeneralTable with additional
columns. Creation or deletion of a row in the
vRtrLdpNgGeneralTable results in the same fate for the row
in the vRtrLdpNgCapabilityTable."
::= { tmnxLdpNgObjs 43 }
vRtrLdpNgCapabilityEntry OBJECT-TYPE
SYNTAX VRtrLdpNgCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An row in this table contains capability information about an LDP
instance."
AUGMENTS { vRtrLdpNgGeneralEntry }
::= { vRtrLdpNgCapabilityTable 1 }
VRtrLdpNgCapabilityEntry ::= SEQUENCE
{
vRtrLdpNgGenP2MPCapability TruthValue,
vRtrLdpNgGenMPMBBCapability TruthValue,
vRtrLdpNgGenDynamicCapability TruthValue,
vRtrLdpNgGenOverloadCapability TruthValue,
vRtrLdpNgGenFec128Capability TruthValue,
vRtrLdpNgGenFec129Capability TruthValue,
vRtrLdpNgGenIPv4PfxFecCapability TruthValue,
vRtrLdpNgGenIPv6PfxFecCapability TruthValue,
vRtrLdpNgGenUnregNotiCapability TruthValue
}
vRtrLdpNgGenP2MPCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenP2MPCapability indicates whether
Point-to-Multipoint (P2MP) FEC capability is supported in the LDP
instance or not. When the value is 'true', the LDP instance is P2MP
capable."
::= { vRtrLdpNgCapabilityEntry 1 }
vRtrLdpNgGenMPMBBCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenMPMBBCapability indicates whether
Multipoint(MP) Make-Before-Break (MBB) capability is supported
in the LDP instance or not. When the value is 'true', the LDP
instance is MP MBB capable."
::= { vRtrLdpNgCapabilityEntry 2 }
vRtrLdpNgGenDynamicCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenDynamicCapability indicates whether dynamic
capability negotiation is supported or not in LDP sessions associated
with the LDP instance. When 'true', the LDP instance supports dynamic
capability negotiation."
::= { vRtrLdpNgCapabilityEntry 3 }
vRtrLdpNgGenOverloadCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenOverloadCapability indicates whether LSR
Overload is supported or not in LDP sessions associated with the LDP
instance. When 'true', the LDP instance is LSR overload capable."
::= { vRtrLdpNgCapabilityEntry 4 }
vRtrLdpNgGenFec128Capability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenFec128Capability indicates whether or not PW
(Pseudowire) ID FEC capability is supported in LDP instance."
::= { vRtrLdpNgCapabilityEntry 5 }
vRtrLdpNgGenFec129Capability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenFec129Capability indicates whether or not
General PW ID FEC capability is supported in LDP instance."
::= { vRtrLdpNgCapabilityEntry 6 }
vRtrLdpNgGenIPv4PfxFecCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenIPv4PfxFecCapability indicates whether or not
IPv4 Prefix FEC capability is supported in LDP instance."
::= { vRtrLdpNgCapabilityEntry 7 }
vRtrLdpNgGenIPv6PfxFecCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenIPv6PfxFecCapability indicates whether or not
IPv6 Prefix FEC capability is supported in LDP instance."
::= { vRtrLdpNgCapabilityEntry 8 }
vRtrLdpNgGenUnregNotiCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenUnregNotiCapability indicates whether or not
Unrecognized Notification capability is supported in LDP instance."
::= { vRtrLdpNgCapabilityEntry 9 }
vRtrLdpNgTcpSessParamsTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTcpSessParamsTableLstCh indicates the last
timestamp when an entry in the vRtrLdpNgTcpSessParamsTable was last
changed."
::= { tmnxLdpNgObjs 44 }
vRtrLdpNgTcpSessParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgTcpSessParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgTcpSessParamsTable is used to configure parameters applicable
to TCP transport session of an LDP session to remote peer."
::= { tmnxLdpNgObjs 45 }
vRtrLdpNgTcpSessParamsEntry OBJECT-TYPE
SYNTAX VRtrLdpNgTcpSessParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents information applicable to TCP session to far
end peer.
Row entries can be created or deleted via SNMP SET requests. A row
with default attribute values is created by setting
vRtrLdpNgTcpSessRowStatus to 'createAndGo'. A row entry can be
destroyed by setting vRtrLdpNgTcpSessRowStatus to 'destroy'."
INDEX {
vRtrID,
vRtrLdpNgTcpSessPeerAddrType,
vRtrLdpNgTcpSessPeerAddr
}
::= { vRtrLdpNgTcpSessParamsTable 1 }
VRtrLdpNgTcpSessParamsEntry ::= SEQUENCE
{
vRtrLdpNgTcpSessPeerAddrType InetAddressType,
vRtrLdpNgTcpSessPeerAddr InetAddress,
vRtrLdpNgTcpSessRowStatus RowStatus,
vRtrLdpNgTcpSessAuth INTEGER,
vRtrLdpNgTcpSessAuthKey OCTET STRING,
vRtrLdpNgTcpSessAuthKeyChain TNamedItemOrEmpty,
vRtrLdpNgTcpSessPMTUDiscovery TruthValue,
vRtrLdpNgTcpSessMinTTLValue Unsigned32
}
vRtrLdpNgTcpSessPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTcpSessPeerAddrType specifies the IP address
type for vRtrLdpNgTcpSessPeerAddr."
::= { vRtrLdpNgTcpSessParamsEntry 1 }
vRtrLdpNgTcpSessPeerAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTcpSessPeerAddr specifies the remote TCP
transport address to use for an LDP session to a peer. This value
corresponds to peer address (vRtrLdpNgSessPeerAddress) of LDP session."
::= { vRtrLdpNgTcpSessParamsEntry 2 }
vRtrLdpNgTcpSessRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrLdpNgTcpSessRowStatus is used to control the creation and deletion
of rows in the vRtrLdpNgTcpSessParamsTable.
A row can be created by setting vRtrLdpNgTcpSessRowStatus to
'createAndGo'. The agent should assign the default attribute values
and change the row status to 'active'.
A row entry can be destroyed by setting vRtrLdpNgTcpSessRowStatus to
'destroy'."
::= { vRtrLdpNgTcpSessParamsEntry 3 }
vRtrLdpNgTcpSessAuth OBJECT-TYPE
SYNTAX INTEGER {
none (1),
md5 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of vRtrLdpNgTcpSessAuth is 'none', no authentication is
used.
When the value of this object is 'md5', authentication using MD5
message based digest protocol is enabled."
DEFVAL { none }
::= { vRtrLdpNgTcpSessParamsEntry 4 }
vRtrLdpNgTcpSessAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The string specified in vRtrLdpNgTcpSessAuthKey is the authentication
key to be used between two LDP neighbors before establishing TCP
transport session of the LDP protocol stream. Authentication is done
using the MD-5 message based digest protocol. Note that the string may
NOT contain embedded nulls.
An SNMP Get request on this object should return an OCTET STRING of
length 0."
DEFVAL { ''H }
::= { vRtrLdpNgTcpSessParamsEntry 5 }
vRtrLdpNgTcpSessAuthKeyChain OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTcpSessAuthKeyChain specifies the keychain which
will be used to sign and/or authenticate TCP transport session of the
LDP protocol stream.
The keychain name is defined by tmnxKeyChainName and is the index for
TIMETRA-SECURITY-MIB::tmnxKeyChainTable"
DEFVAL { ''H }
::= { vRtrLdpNgTcpSessParamsEntry 6 }
vRtrLdpNgTcpSessPMTUDiscovery OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTcpSessPMTUDiscovery specifies whether path MTU
discovery is enabled for this TCP transport session.
When the value is set to 'true', path MTU discovery is enabled for
this TCP transport session. When the value is set to 'false', path MTU
discovery is disabled."
DEFVAL { false }
::= { vRtrLdpNgTcpSessParamsEntry 7 }
vRtrLdpNgTcpSessMinTTLValue OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTcpSessMinTTLValue specifies the minimum TTL
value for an incoming LDP packet.
If vRtrLdpNgTcpSessMinTTLValue is set to zero (0), the TTL Security
feature is disabled."
DEFVAL { 0 }
::= { vRtrLdpNgTcpSessParamsEntry 8 }
vRtrLdpNgGeneralTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGeneralTableLstCh indicates the last timestamp
when an entry in the vRtrLdpNgGeneralTable was last changed."
::= { tmnxLdpNgObjs 46 }
vRtrLdpNgGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgGeneralTable has an entry for each virtual router in the
system capable of supporting an instance of the Label Distribution
Protocol (LDP)."
::= { tmnxLdpNgObjs 47 }
vRtrLdpNgGeneralEntry OBJECT-TYPE
SYNTAX VRtrLdpNgGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of the Label Distribution
Protocol (LDP) for a virtual router in the system.
An entry in this table is created by the agent when vRtrLdpStatus in
the vRtrConfTable is set to 'create'. The entry is destroyed when
vRtrLdpStatus is set to 'delete' but only if vRtrLdpNgGenAdminState
has a value of 'outOfService'."
INDEX { vRtrID }
::= { vRtrLdpNgGeneralTable 1 }
VRtrLdpNgGeneralEntry ::= SEQUENCE
{
vRtrLdpNgGenCreateTime TimeStamp,
vRtrLdpNgGenIPv4UpTime TimeInterval,
vRtrLdpNgGenIPv6UpTime TimeInterval,
vRtrLdpNgGenLastChange TimeStamp,
vRtrLdpNgGenAdminState TmnxAdminState,
vRtrLdpNgGenIPv4OperState TmnxOperState,
vRtrLdpNgGenIPv6OperState TmnxOperState,
vRtrLdpNgGenIPv4OperDownReason TmnxLdpGenOperDownReasonCode,
vRtrLdpNgGenIPv6OperDownReason TmnxLdpGenOperDownReasonCode,
vRtrLdpNgGenLdpIPv4LsrId MplsLsrIdentifier,
vRtrLdpNgGenLdpIPv6LsrId TmnxMplsLsrNgIdentifier,
vRtrLdpNgGenProtocolVersion Unsigned32,
vRtrLdpNgGenBackoffTime TmnxLdpBackoffTime,
vRtrLdpNgGenMaxBackoffTime TmnxLdpBackoffTime,
vRtrLdpNgGenTunnelDownDampTime Unsigned32,
vRtrLdpNgGenGracefulRestart TruthValue,
vRtrLdpNgGenGRNbrLiveTime Unsigned32,
vRtrLdpNgGenGRMaxRecoveryTime Unsigned32,
vRtrLdpNgGenLabelWithdrawalDelay Unsigned32,
vRtrLdpNgGenImplicitNull TruthValue,
vRtrLdpNgGenShortTTLPropLocal TruthValue,
vRtrLdpNgGenShortTTLPropTransit TruthValue,
vRtrLdpNgGenMPMBBTime Unsigned32,
vRtrLdpNgGenLdpFrr TruthValue,
vRtrLdpNgGenMcastUpstreamFrr TruthValue,
vRtrLdpNgGenDeaggregateFec TruthValue,
vRtrLdpNgGenControlMode INTEGER,
vRtrLdpNgGenDistMethod TmnxLdpLabelDistMethod,
vRtrLdpNgGenRetentionMode INTEGER,
vRtrLdpNgGenPropagatePolicy TmnxLdpFECPolicy,
vRtrLdpNgGenLoopDetectCap INTEGER,
vRtrLdpNgGenHopLimit Unsigned32,
vRtrLdpNgGenPathVectorLimit Unsigned32,
vRtrLdpNgGenRoutePreference Unsigned32,
vRtrLdpNgGenClassForwarding TruthValue,
vRtrLdpNgGenIpv4LsrInterop TruthValue,
vRtrLdpNgGenEntropyLblCapability TruthValue,
vRtrLdpNgGenFrrSRStitch TruthValue,
vRtrLdpNgGenMcastUpstrmAsbrFrr TruthValue,
vRtrLdpNgGenBasicFecOnly TmnxEnabledDisabled,
vRtrLdpNgResolveRootUsing INTEGER,
vRtrLdpNgGenWeightedEcmp TruthValue,
vRtrLdpNgGenConsiderSysIPInGep TruthValue,
vRtrLdpNgGenCBFMode INTEGER,
vRtrLdpNgImpPmsiMvpn TruthValue,
vRtrLdpNgImpPmsiMvpnNoExpComm TruthValue,
vRtrLdpNgMaxEcmpRoutes Unsigned32,
vRtrLdpNgOperEcmp Unsigned32
}
vRtrLdpNgGenCreateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenCreateTime indicates the sysUpTime when this
LDP instance was created."
::= { vRtrLdpNgGeneralEntry 1 }
vRtrLdpNgGenIPv4UpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenIPv4UpTime indicates the time, in hundreds of
seconds, that the IPv4 LDP instance has been in current operational
state (vRtrLdpNgGenIPv4OperState).
If the value of vRtrLdpNgGenIPv4OperState is 'inService (2)', then
vRtrLdpNgGenIPv4UpTime specifies the time that the IPv4 LDP instance
has been operationally up.
If the value of vRtrLdpNgGenIPv4OperState is 'outOfService (3)', then
vRtrLdpNgGenIPv4UpTime specifies the time that the IPv4 LDP instance
has been operationally down.
If the value of vRtrLdpNgGenIPv4OperState is 'transition (4)', then
vRtrLdpNgGenIPv4UpTime specifies the time that the IPv4 LDP instance
has been operationally in transition."
::= { vRtrLdpNgGeneralEntry 2 }
vRtrLdpNgGenIPv6UpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenIPv6UpTime indicates the time, in hundreds of
seconds, that the IPv6 LDP instance has been in current operational
state (vRtrLdpNgGenIPv6OperState).
If the value of vRtrLdpNgGenIPv6OperState is 'inService (2)', then
vRtrLdpNgGenIPv6UpTime specifies the time that the IPv6 LDP instance
has been operationally up.
If the value of vRtrLdpNgGenIPv6OperState is 'outOfService (3)', then
vRtrLdpNgGenIPv6UpTime specifies the time that the IPv6 LDP instance
has been operationally down.
If the value of vRtrLdpNgGenIPv6OperState is 'transition (4)', then
vRtrLdpNgGenIPv6UpTime specifies the time that the IPv6 LDP instance
has been operationally in transition."
::= { vRtrLdpNgGeneralEntry 3 }
vRtrLdpNgGenLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenLastChange indicates the sysUpTime when this
row was last modified."
::= { vRtrLdpNgGeneralEntry 4 }
vRtrLdpNgGenAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenAdminState specifies the desired
administrative state for this LDP instance."
DEFVAL { inService }
::= { vRtrLdpNgGeneralEntry 5 }
vRtrLdpNgGenIPv4OperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenIPv4OperState indicates the current
operational state of this IPv4 LDP instance."
::= { vRtrLdpNgGeneralEntry 6 }
vRtrLdpNgGenIPv6OperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenIPv6OperState indicates the current
operational state of this IPv6 LDP instance."
::= { vRtrLdpNgGeneralEntry 7 }
vRtrLdpNgGenIPv4OperDownReason OBJECT-TYPE
SYNTAX TmnxLdpGenOperDownReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenIPv4OperDownReason indicates the reason that
the IPv4 LDP instance is operationally down."
::= { vRtrLdpNgGeneralEntry 8 }
vRtrLdpNgGenIPv6OperDownReason OBJECT-TYPE
SYNTAX TmnxLdpGenOperDownReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenIPv6OperDownReason indicates the reason that
the IPv6 LDP instance is operationally down."
::= { vRtrLdpNgGeneralEntry 9 }
vRtrLdpNgGenLdpIPv4LsrId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenLdpIPv4LsrId is the IPv4 Label Switch Router
(LSR) identifier which is used as the first 4 bytes or the Router Id
component of the Label Distribution Protocol (LDP) identifier."
::= { vRtrLdpNgGeneralEntry 10 }
vRtrLdpNgGenLdpIPv6LsrId OBJECT-TYPE
SYNTAX TmnxMplsLsrNgIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenLdpIPv6LsrId is the IPv6 Label Switch Router
(LSR) identifier which is used as the first 16 bytes or the Router Id
component of the Label Distribution Protocol (LDP) identifier."
::= { vRtrLdpNgGeneralEntry 11 }
vRtrLdpNgGenProtocolVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenProtocolVersion specifies the
version of the LDP protocol instance. A value of zero (0)
indicates that the version of the protocol is unknown."
::= { vRtrLdpNgGeneralEntry 12 }
vRtrLdpNgGenBackoffTime OBJECT-TYPE
SYNTAX TmnxLdpBackoffTime (1..2592000)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenBackoffTime specifies the initial value for
the backoff interval.
The backoff interval is the time, in seconds, that LDP waits after an
LDP session setup has failed before it attempts to setup the session
again. After the LDP session startup fails the first time, the backoff
interval is set to the value of vRtrLdpNgGenBackoffTime. Thereafter,
if session startup fails again the backoff interval increases
exponentially."
::= { vRtrLdpNgGeneralEntry 13 }
vRtrLdpNgGenMaxBackoffTime OBJECT-TYPE
SYNTAX TmnxLdpBackoffTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenMaxBackoffTime specifies the maximum value
for the backoff interval.
For each successive failure of the LDP session startup, the backoff
interval (the time for which the router waits before retrying)
increases exponentially. If the backoff interval exceeds
vRtrLdpNgGenMaxBackoffTime, the router will give up trying to
establish the LDP session.
If vRtrLdpNgGenMaxBackoffTime is set to zero (0), then the backoff
interval does not increase exponentially after the first session
startup attempt fails. Instead it remains constant and LDP will keep
retrying to establish a session until it succeeds."
::= { vRtrLdpNgGeneralEntry 14 }
vRtrLdpNgGenTunnelDownDampTime OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenTunnelDownDampTime specifies the time
interval, in seconds, that LDP waits before posting a tunnel down
event to the Route Table Manager. If a tunnel up event is generated
before the damping interval has elapsed, a tunnel modify event will be
posted to the Route Table Manager (RTM). If this value is set to 0,
then tunnel down events are not damped."
DEFVAL { 3 }
::= { vRtrLdpNgGeneralEntry 15 }
vRtrLdpNgGenGracefulRestart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenGracefulRestart specifies whether graceful
restart helper is allowed. When this object has a value of 'true',
graceful restart helper is enabled. When its value is 'false',
graceful restart helper is disabled."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 16 }
vRtrLdpNgGenGRNbrLiveTime OBJECT-TYPE
SYNTAX Unsigned32 (5..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenGRNbrLiveTime specifies the value for neighbor
liveness timer. The amount of time the Label Switching Router (LSR)
keeps its stale label-FEC bindings is set to the lesser of the FT
Reconnect Timeout, as was advertised by the neighbor, and this local
timer, called the Neighbor Liveness Timer.
The LSR waits for the specified time till a LDP session re-establishes
itself. If within that time the LSR still does not establish an LDP
session with the neighbor, all the stale bindings are deleted. This
object has meaning only when vRtrLdpNgGenGracefulRestart is 'true'."
DEFVAL { 120 }
::= { vRtrLdpNgGeneralEntry 17 }
vRtrLdpNgGenGRMaxRecoveryTime OBJECT-TYPE
SYNTAX Unsigned32 (15..1800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenGRMaxRecoveryTime specifies the local maximum
recovery time.
If the Label Switching Router (LSR) determines that the neighbor was
able to preserve its MPLS forwarding state (as was indicated by the
non-zero Recovery Time advertised by the neighbor), the LSR should
further keep the stale label-FEC bindings, received from the
neighbor, for as long as the lesser of the Recovery Time advertised
by the neighbor, and a local configurable value, called Maximum
Recovery Time, allows. This object has meaning only when
vRtrLdpNgGenGracefulRestart is 'true'."
DEFVAL { 120 }
::= { vRtrLdpNgGeneralEntry 18 }
vRtrLdpNgGenLabelWithdrawalDelay OBJECT-TYPE
SYNTAX Unsigned32 (0 | 3..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenLabelWithdrawalDelay specifies the time
interval, in seconds, LDP will delay for the withdrawal of FEC-label
binding it distributed to its neighbours when FEC is deactivated. When
the timer expires, LDP then sends a label withdrawal for the FEC to
all its neighbours. This is applicable only to LDP transport tunnels
(ipv4 prefix FECs) and is not applicable to Pseudowires (service
FECs).
A value of 0 indicates that vRtrLdpNgGenLabelWithdrawalDelay is
disabled."
DEFVAL { 0 }
::= { vRtrLdpNgGeneralEntry 19 }
vRtrLdpNgGenImplicitNull OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenImplicitNull specifies whether or not to
signal implicit null values for all LDP FECs for which this node is an
egress Label Edge Router (LER). When the value is true implicit null
values are signaled."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 20 }
vRtrLdpNgGenShortTTLPropLocal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenShortTTLPropLocal specifies whether or not
to enable the propagation of time to live (TTL) from the header of
IP packet into the header of resulting MPLS packet for all local
packets forwarded over a LDP shortcut. When the value is set to
'true' TTL is propagated from the header of IP packet into the
header of the resulting MPLS packet for all local packets."
DEFVAL { true }
::= { vRtrLdpNgGeneralEntry 21 }
vRtrLdpNgGenShortTTLPropTransit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenShortTTLPropTransit specifies whether or not
to enable the propagation of time to live (TTL) from the header of
IP packet into the header of resulting MPLS packet for all transit
packets forwarded over a LDP shortcut. When the value is set to
'true' TTL is propagated from the header of IP packet into the
header of the resulting MPLS packet for all transit packets."
DEFVAL { true }
::= { vRtrLdpNgGeneralEntry 22 }
vRtrLdpNgGenMPMBBTime OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenMPMBBTime specifies the maximum time a Multi
Point (MP) transit node must wait before switching over to a new path
if the new node does not send Make Before Break (MBB) Tag Length Value
(TLV) to inform of the availability of the data plane."
DEFVAL { 3 }
::= { vRtrLdpNgGeneralEntry 23 }
vRtrLdpNgGenLdpFrr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenLdpFrr specifies whether fast reroute of LDP
tunnel is enabled or disabled.
When the value of vRtrLdpNgGenLdpFrr is set to 'true' fast reroute of
LDP tunnel is enabled and when vRtrLdpNgGenLdpFrr is set to 'false'
fast reroute of LDP tunnel is disabled.
When disabling vRtrLdpNgGenLdpFrr, the setting for FRR via
segmented-routing tunnel stitching (vRtrLdpNgGenFrrSRStitch) must also
be disabled."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 24 }
vRtrLdpNgGenMcastUpstreamFrr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenMcastUpstreamFrr specifies whether mLDP fast
upstream switchover feature is enabled or not for the LDP instance.
When 'true', the LDP instance supports mLDP fast upstream switchover."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 25 }
vRtrLdpNgGenDeaggregateFec OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When vRtrLdpNgGenDeaggregateFec has a value of 'false', LDP aggregates
multiple prefixes into a single Forwarding Equivalence Class (FEC) and
advertises a single label for the FEC. When the value is 'true', LDP
deaggregates prefixes into multiple FECs."
::= { vRtrLdpNgGeneralEntry 26 }
vRtrLdpNgGenControlMode OBJECT-TYPE
SYNTAX INTEGER {
ordered (1),
independent (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenControlMode specifies the mode used for
distributing labels in response to label binding requests.
When vRtrLdpNgGenControlMode has a value of 'ordered', label bindings
are not distributed in response to a label request until a label
binding has been received from the next hop for the destination.
When vRtrLdpNgGenControlMode has a value of 'independent', label
bindings are distributed immediately in response to a label request
even if a label binding has not yet been received from the next hop
for the destination."
::= { vRtrLdpNgGeneralEntry 27 }
vRtrLdpNgGenDistMethod OBJECT-TYPE
SYNTAX TmnxLdpLabelDistMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenDistMethod specifies the label distribution
method used.
When vRtrLdpNgGenDistMethod has a value of 'downstreamOnDemand', label
bindings are distributed to the upstream LSR, for each FEC, without
requiring a request message for the FEC from the upstream LSR.
When vRtrLdpNgGenDistMethod has a value of 'downstreamUnsolicited',
label bindings are distributed to the upstream LSR only when a label
request message is received."
::= { vRtrLdpNgGeneralEntry 28 }
vRtrLdpNgGenRetentionMode OBJECT-TYPE
SYNTAX INTEGER {
conservative (1),
liberal (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenRetentionMode specifies the label retention
mode used.
If the value of this object is 'conservative', then advertised
label mappings are retained only if they will be used to forward
packets, i.e. if the label came from a valid next hop. Label
bindings received from non-nexthops for each FEC are discarded.
If the value of this object is 'liberal', then all advertised
label mappings are retained whether they are from a valid next
hop or not. When vRtrLdpNgGenDistMethod has a value of
'downstreamUnsolicited', a LSR may receive label bindings for
the same destination for all its neighbors. Labels for the
non-nexthops for the FECs are retained in the software but not
used. When a network topology change occurs where a non-nexthop
becomes a true next hop, the label received earlier is then used."
::= { vRtrLdpNgGeneralEntry 29 }
vRtrLdpNgGenPropagatePolicy OBJECT-TYPE
SYNTAX TmnxLdpFECPolicy
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenPropagatePolicy determines whether the LSR
should generate FECs and which FECs it should generate.
When the value of this object is 'system', LDP will distribute label
bindings only for the router's system IP address
When the value of this object is 'interface', LDP will distribute
label bindings for all LDP interfaces
When the value of this object is 'all', LDP will distribute label
bindings for all prefixes in the routing table
When the value of this object is 'none', LDP will not distribute any
label bindings."
::= { vRtrLdpNgGeneralEntry 30 }
vRtrLdpNgGenLoopDetectCap OBJECT-TYPE
SYNTAX INTEGER {
none (1),
other (2),
hopCount (3),
pathVector (4),
hopCountAndPathVector (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenLoopDetectCap indicates whether this LSR
supports loop detection and if so, what type of loop detection is
supported.
When the value is 'none' loop detection is not supported on this LSR.
When the value is 'other' Loop Detection is supported but by a method
other than those listed below.
When the value is 'hopCount' Loop Detection is supported by Hop Count
only.
When the value is 'pathVector' Loop Detection is supported by Path
Vector only.
When the value is 'hopCountAndPathVector' Loop Detection is supported
by both Hop Count and Path Vector.
Since Loop Detection is determined during Session Initialization, an
individual session may not be running with loop detection. This object
simply gives an indication of whether or not the LSR has the ability
to support Loop Detection and which types."
::= { vRtrLdpNgGeneralEntry 31 }
vRtrLdpNgGenHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenHopLimit specifies the maximum
allowable value for the hop count. The value of this object
is valid and used only if vRtrLdpNgGenLoopDetectCap has
a value of either 'hopCount' or 'hopCountAndPathVector'."
::= { vRtrLdpNgGeneralEntry 32 }
vRtrLdpNgGenPathVectorLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenPathVectorLimit specifies the maximum
allowable value for the path vector count. The value of this
object is valid and used only if vRtrLdpNgGenLoopDetectCap
has a value of either 'pathVector' or 'hopCountAndPathVector'."
::= { vRtrLdpNgGeneralEntry 33 }
vRtrLdpNgGenRoutePreference OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenRoutePreference specifies the route
preference assigned to LDP routes. When multiple routes are available
to a destination, the route with the lowest preference will be used."
::= { vRtrLdpNgGeneralEntry 34 }
vRtrLdpNgGenClassForwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenClassForwarding indicates whether class
forwarding is enabled or not for LDP-over-RSVP."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 35 }
vRtrLdpNgGenIpv4LsrInterop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenIpv4LsrInterop specifies if interoperability
with legacy IPv4 LSR implementations which do not comply to the
processing of Hello TLVs with the U-bit set is allowed."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 36 }
vRtrLdpNgGenEntropyLblCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenEntropyLblCapability specifies whether
entropy label capability is enabled or not on the LDP node. When the
value of vRtrLdpNgGenEntropyLblCapability is set to 'true', the egress
LER will advertise that it is capable of receiving and processing the
entropy label."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 37 }
vRtrLdpNgGenFrrSRStitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenFrrSRStitch specifies whether fast reroute of
LDP tunnel via a segmented-routing tunnel is enabled or disabled.
When the value of vRtrLdpNgGenFrrSRStitch is set to 'true' fast
reroute of LDP tunnel via SR tunnel is enabled and when
vRtrLdpNgGenFrrSRStitch is set to 'false' fast reroute of LDP tunnel
via SR tunnel is disabled.
Regular LDP FRR must be enabled via vRtrLdpNgGenLdpFrr in order to
enable FRR via segmented-routing tunnel stitching."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 38 }
vRtrLdpNgGenMcastUpstrmAsbrFrr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenMcastUpstrmAsbrFrr specifies whether the
local leaf will do MOFRR to the multiple ASBRs or not.
When the value of vRtrLdpNgGenMcastUpstrmAsbrFrr is set to 'false'
only IGP MOFRR in the local AS is allowed."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 39 }
vRtrLdpNgGenBasicFecOnly OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenBasicFecOnly specifies whether the root node
will generate a non recursive FEC even if the root node is resolved
via BGP.
When the value of vRtrLdpNgGenBasicFecOnly is set to 'enabled', a
non-recursive FEC will be generated towards the root node.
When the value of vRtrLdpNgGenBasicFecOnly is set to 'disabled', a
recursive FEC will be generated towards the root node.
This configuration is applicable to FECs whose root address is in the
GRT and that have a generic LSP identifier as the opaque type."
DEFVAL { disabled }
::= { vRtrLdpNgGeneralEntry 40 }
vRtrLdpNgResolveRootUsing OBJECT-TYPE
SYNTAX INTEGER {
ucastRtm (1),
mcastRtm (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgResolveRootUsing specifies whether multicast
FECs will use the unicast route table or the multicast route table
for resolution."
DEFVAL { ucastRtm }
::= { vRtrLdpNgGeneralEntry 41 }
vRtrLdpNgGenWeightedEcmp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenWeightedEcmp specifies
whether or not LDP will use weighted-ECMP when programming
LDP prefix FECs. Weighting information must be available
for the relevant route in order for weighted-ECMP to be used."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 42 }
vRtrLdpNgGenConsiderSysIPInGep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenConsiderSysIPInGep specifies whether or not
creation of system IP FECs is affected by the LDP global export
policy. When enabled, the global export policy is consulted when
determining whether or not to create a FEC for the system IP
address(es). When disabled, FECs are unconditionally created for the
system IP address(es)."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 43 }
vRtrLdpNgGenCBFMode OBJECT-TYPE
SYNTAX INTEGER {
lsr (1),
ler (2),
lsr-and-ler (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgGenCBFMode indicates whether class forwarding is
enabled for LER, LSR or both. It has no effect unless
vRtrLdpNgGenClassForwarding is enabled."
DEFVAL { lsr }
::= { vRtrLdpNgGeneralEntry 44 }
vRtrLdpNgImpPmsiMvpn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgImpPmsiMvpn specifies whether LDP will import
BGP MVPN inter-AS routes."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 46 }
vRtrLdpNgImpPmsiMvpnNoExpComm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgImpPmsiMvpnNoExpComm specifies whether LDP will
import BGP MVPN intra-AS routes."
DEFVAL { false }
::= { vRtrLdpNgGeneralEntry 47 }
vRtrLdpNgMaxEcmpRoutes OBJECT-TYPE
SYNTAX Unsigned32 (1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgMaxEcmpRoutes specifies the maximum ECMP value
for LDP. LDP uses the smaller value of this configured value and the
ECMP value configured under router as the operational ECMP value."
DEFVAL { 32 }
::= { vRtrLdpNgGeneralEntry 49 }
vRtrLdpNgOperEcmp OBJECT-TYPE
SYNTAX Unsigned32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgOperEcmp specifies the operational ECMP value.
This value is the smaller of the configured router ECMP value and the
configured LDP max ECMP routes value."
::= { vRtrLdpNgGeneralEntry 50 }
vRtrLdpNgPolicyTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolicyTableLstCh indicates the last timestamp
when an entry in the vRtrLdpNgPolicyTable was last changed."
::= { tmnxLdpNgObjs 48 }
vRtrLdpNgPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgGeneralTable keeps information about LDP policies.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vRtrLdpNgGeneralTable, and the augmenting table,
vRtrLdpTargTable. This in effect extends the vRtrLdpNgGeneralTable with
additional columns. Creation or deletion of a row in the
vRtrLdpNgGeneralTable results in the same fate for the row in the
vRtrLdpTargTable."
::= { tmnxLdpNgObjs 49 }
vRtrLdpNgPolicyEntry OBJECT-TYPE
SYNTAX VRtrLdpNgPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents information about the policy
configuration in LDP"
AUGMENTS { vRtrLdpNgGeneralEntry }
::= { vRtrLdpNgPolicyTable 1 }
VRtrLdpNgPolicyEntry ::= SEQUENCE
{
vRtrLdpNgPolRowLastCh TimeStamp,
vRtrLdpNgPolImportPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolImportPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolImportPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolImportPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolImportPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolExportPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolExportPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolExportPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolExportPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolExportPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblExportPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblExportPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblExportPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblExportPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblExportPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblImportPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblImportPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblImportPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblImportPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolTunlTblImportPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolImportMcastPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolImportMcastPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolImportMcastPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolImportMcastPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgPolImportMcastPolicy5 TPolicyStatementNameOrEmpty
}
vRtrLdpNgPolRowLastCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolRowLastCh indicates the timestamp when this
row was last modified."
::= { vRtrLdpNgPolicyEntry 1 }
vRtrLdpNgPolImportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportPolicy1 specifies the first import
policy used to filter LDP label bindings received from LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 2 }
vRtrLdpNgPolImportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportPolicy2 specifies the second import
policy used to filter LDP label bindings received from LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 3 }
vRtrLdpNgPolImportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportPolicy3 specifies the third import
policy used to filter LDP label bindings received from LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 4 }
vRtrLdpNgPolImportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportPolicy4 specifies the fourth import
policy used to filter LDP label bindings received from LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 5 }
vRtrLdpNgPolImportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportPolicy5 specifies the fifth import
policy used to filter LDP label bindings received from LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 6 }
vRtrLdpNgPolExportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolExportPolicy1 specifies the first export
policy used to filter LDP label bindings advertised to LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 7 }
vRtrLdpNgPolExportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolExportPolicy2 specifies the second export
policy used to filter LDP label bindings advertised to LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 8 }
vRtrLdpNgPolExportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolExportPolicy3 specifies the third export
policy used to filter LDP label bindings advertised to LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 9 }
vRtrLdpNgPolExportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolExportPolicy4 specifies the fourth export
policy used to filter LDP label bindings advertised to LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 10 }
vRtrLdpNgPolExportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolExportPolicy5 specifies the fifth export
policy used to filter LDP label bindings advertised to LDP peers."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 11 }
vRtrLdpNgPolTunlTblExportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblExportPolicy1 specifies the first
tunnel table export policy used for exporting tunneled routes from the
CPM tunnel table as LDP FEC."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 12 }
vRtrLdpNgPolTunlTblExportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblExportPolicy2 specifies the second
tunnel table export policy used for exporting tunneled routes from the
CPM tunnel table as LDP FEC."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 13 }
vRtrLdpNgPolTunlTblExportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblExportPolicy3 specifies the third
tunnel table export policy used for exporting tunneled routes from the
CPM tunnel table as LDP FEC."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 14 }
vRtrLdpNgPolTunlTblExportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblExportPolicy4 specifies the fourth
tunnel table export policy used for exporting tunneled routes from the
CPM tunnel table as LDP FEC."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 15 }
vRtrLdpNgPolTunlTblExportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblExportPolicy5 specifies the fifth
tunnel table export policy used for exporting tunneled routes from the
CPM tunnel table as LDP FEC."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 16 }
vRtrLdpNgPolTunlTblImportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblImportPolicy1 specifies the first
tunnel table import policy used for controlling the insertion of
non-host prefixes resolved by LDP into the CPM tunnel table."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 17 }
vRtrLdpNgPolTunlTblImportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblImportPolicy2 specifies the second
tunnel table import policy used for controlling the insertion of
non-host prefixes resolved by LDP into the CPM tunnel table."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 18 }
vRtrLdpNgPolTunlTblImportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblImportPolicy3 specifies the third
tunnel table import policy used for controlling the insertion of
non-host prefixes resolved by LDP into the CPM tunnel table."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 19 }
vRtrLdpNgPolTunlTblImportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblImportPolicy4 specifies the fourth
tunnel table import policy used for controlling the insertion of
non-host prefixes resolved by LDP into the CPM tunnel table."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 20 }
vRtrLdpNgPolTunlTblImportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolTunlTblImportPolicy5 specifies the fifth
tunnel table import policy used for controlling the insertion of
non-host prefixes resolved by LDP into the CPM tunnel table."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 21 }
vRtrLdpNgPolImportMcastPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportMcastPolicy1 specifies the first import
multicast policy used for controlling which multicast FECs are
accepted from downtream peers for resolution."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 22 }
vRtrLdpNgPolImportMcastPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportMcastPolicy2 specifies the second
import multicast policy used for controlling which multicast FECs are
accepted from downtream peers for resolution."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 23 }
vRtrLdpNgPolImportMcastPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportMcastPolicy3 specifies the third import
multicast policy used for controlling which multicast FECs are
accepted from downtream peers for resolution."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 24 }
vRtrLdpNgPolImportMcastPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportMcastPolicy4 specifies the fourth
import multicast policy used for controlling which multicast FECs are
accepted from downtream peers for resolution."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 25 }
vRtrLdpNgPolImportMcastPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgPolImportMcastPolicy5 specifies the fifth import
multicast policy used for controlling which multicast FECs are
accepted from downtream peers for resolution."
DEFVAL { ''H }
::= { vRtrLdpNgPolicyEntry 26 }
vRtrLdpNgIfParamsTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamsTableLstCh indicates the last timestamp
when an entry in the vRtrLdpNgIfParamsTable was last changed."
::= { tmnxLdpNgObjs 50 }
vRtrLdpNgIfParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgIfParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgIfParamsTable keeps information applicable to the interfaces
in LDP.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vRtrLdpNgGeneralTable, and the augmenting
table, vRtrLdpNgIfParamsTable. This in effect extends the
vRtrLdpNgGeneralTable with additional columns. Creation or deletion
of a row in the vRtrLdpNgGeneralTable results in the same fate for the
row in the vRtrLdpNgIfParamsTable."
::= { tmnxLdpNgObjs 51 }
vRtrLdpNgIfParamsEntry OBJECT-TYPE
SYNTAX VRtrLdpNgIfParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents information applicable to the
interfaces in LDP."
AUGMENTS { vRtrLdpNgGeneralEntry }
::= { vRtrLdpNgIfParamsTable 1 }
VRtrLdpNgIfParamsEntry ::= SEQUENCE
{
vRtrLdpNgIfParamRowLastCh TimeStamp,
vRtrLdpNgIfParamIPv4KAFactor TmnxLdpKeepAliveFactor,
vRtrLdpNgIfParamIPv6KAFactor TmnxLdpKeepAliveFactor,
vRtrLdpNgIfParamIPv4KATimeout TmnxLdpNewKeepAliveTimeout,
vRtrLdpNgIfParamIPv6KATimeout TmnxLdpNewKeepAliveTimeout,
vRtrLdpNgIfParamIPv4HelloFactor TmnxLdpHelloFactor,
vRtrLdpNgIfParamIPv6HelloFactor TmnxLdpHelloFactor,
vRtrLdpNgIfParamIPv4HelloTimeout TmnxLdpNewHelloTimeout,
vRtrLdpNgIfParamIPv6HelloTimeout TmnxLdpNewHelloTimeout,
vRtrLdpNgIfParamIPv4TransAddrTyp INTEGER,
vRtrLdpNgIfParamIPv6TransAddrTyp INTEGER
}
vRtrLdpNgIfParamRowLastCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamRowLastCh indicates the timestamp when
this row was last modified."
::= { vRtrLdpNgIfParamsEntry 1 }
vRtrLdpNgIfParamIPv4KAFactor OBJECT-TYPE
SYNTAX TmnxLdpKeepAliveFactor
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv4KAFactor specifies the value by which
the keepalive timeout (vRtrLdpNgIfParamKeepAliveTimeout) should be
divided to give the keepalive time i.e. the time interval, in seconds,
between LDP keepalive messages. LDP keepalive messages are sent to
keep the LDP session from timing out when no other LDP traffic is
being sent between the neighbors.
This value is only applicable to LDP IPv4 interfaces."
DEFVAL { 3 }
::= { vRtrLdpNgIfParamsEntry 2 }
vRtrLdpNgIfParamIPv6KAFactor OBJECT-TYPE
SYNTAX TmnxLdpKeepAliveFactor
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv6KAFactor specifies the value by which
the keepalive timeout (vRtrLdpNgIfParamKeepAliveTimeout) should be
divided to give the keepalive time i.e. the time interval, in seconds,
between LDP keepalive messages. LDP keepalive messages are sent to
keep the LDP session from timing out when no other LDP traffic is
being sent between the neighbors.
This value is only applicable to LDP IPv6 interfaces."
DEFVAL { 3 }
::= { vRtrLdpNgIfParamsEntry 3 }
vRtrLdpNgIfParamIPv4KATimeout OBJECT-TYPE
SYNTAX TmnxLdpNewKeepAliveTimeout
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv4KATimeout specifies the time
interval, in seconds, that LDP waits before tearing down a session. If
no LDP messages are exchanged during this time interval, the LDP
session is torn down. Generally the value of
vRtrLdpNgIfParamIPv4KATimeout is configured to be 3 times the
keepalive time (the time interval between successive LDP keepalive
messages).
This value is only applicable to LDP IPv4 interfaces."
DEFVAL { 30 }
::= { vRtrLdpNgIfParamsEntry 4 }
vRtrLdpNgIfParamIPv6KATimeout OBJECT-TYPE
SYNTAX TmnxLdpNewKeepAliveTimeout
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv6KATimeout specifies the time
interval, in seconds, that LDP waits before tearing down a session. If
no LDP messages are exchanged during this time interval, the LDP
session is torn down. Generally the value of
vRtrLdpNgIfParamIPv6KATimeout is configured to be 3 times the
keepalive time (the time interval between successive LDP keepalive
messages).
This value is only applicable to LDP IPv6 interfaces."
DEFVAL { 30 }
::= { vRtrLdpNgIfParamsEntry 5 }
vRtrLdpNgIfParamIPv4HelloFactor OBJECT-TYPE
SYNTAX TmnxLdpHelloFactor
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv4HelloFactor specifies the value by
which the hello timeout (vRtrLdpNgIfParamIPv4HelloTimeout) should be
divided to give the hello time i.e. the time interval, in seconds,
between LDP Hello messages. LDP uses hello messages to discover
neighbors and to detect loss of connectivity with its neighbors.
This value is only applicable to LDP IPv4 interfaces."
DEFVAL { 3 }
::= { vRtrLdpNgIfParamsEntry 6 }
vRtrLdpNgIfParamIPv6HelloFactor OBJECT-TYPE
SYNTAX TmnxLdpHelloFactor
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv6HelloFactor specifies the value by
which the hello timeout (vRtrLdpNgIfParamIPv6HelloTimeout) should be
divided to give the hello time i.e. the time interval, in seconds,
between LDP Hello messages. LDP uses hello messages to discover
neighbors and to detect loss of connectivity with its neighbors.
This value is only applicable to LDP IPv6 interfaces."
DEFVAL { 3 }
::= { vRtrLdpNgIfParamsEntry 7 }
vRtrLdpNgIfParamIPv4HelloTimeout OBJECT-TYPE
SYNTAX TmnxLdpNewHelloTimeout
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv4HelloTimeout specifies the hello time
also known as hold time. It is the time interval, in seconds, that LDP
waits before declaring a neighbor to be down. Hello timeout is local
to the system and is sent in the hello messages to a neighbor. Hello
timeout cannot be set to a value that is less than 3 times the hello
time.
This value is only applicable to LDP IPv4 interfaces."
DEFVAL { 15 }
::= { vRtrLdpNgIfParamsEntry 8 }
vRtrLdpNgIfParamIPv6HelloTimeout OBJECT-TYPE
SYNTAX TmnxLdpNewHelloTimeout
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv6HelloTimeout specifies the hello time
also known as hold time. It is the time interval, in seconds, that LDP
waits before declaring a neighbor to be down. Hello timeout is local
to the system and is sent in the hello messages to a neighbor. Hello
timeout cannot be set to a value that is less than 3 times the hello
time.
This value is only applicable to LDP IPv6 interfaces."
DEFVAL { 15 }
::= { vRtrLdpNgIfParamsEntry 9 }
vRtrLdpNgIfParamIPv4TransAddrTyp OBJECT-TYPE
SYNTAX INTEGER {
interface (1),
system (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv4TransAddrTyp specifies the source
of the transport address to be used when setting up the LDP TCP
sessions. The transport address can be configured globally
(applied to all interfaces) or per interface.
When the value of this object is 'interface', the interface's IP
address is used to setup the LDP session between neighbors. If
multiple interfaces exist between two neighbors, the 'interface' mode
cannot be used since only one LDP session is actually set up between
the two neighbors.
When the value of this object is 'system', the system's IP address is
used to set up the LDP session between neighbors.
This value is only applicable to LDP IPv4 interfaces."
DEFVAL { system }
::= { vRtrLdpNgIfParamsEntry 10 }
vRtrLdpNgIfParamIPv6TransAddrTyp OBJECT-TYPE
SYNTAX INTEGER {
interface (1),
system (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv6TransAddrTyp specifies the source
of the transport address to be used when setting up the LDP TCP
sessions. The transport address can be configured globally
(applied to all interfaces) or per interface.
When the value of this object is 'interface', the interface's IP
address is used to setup the LDP session between neighbors. If
multiple interfaces exist between two neighbors, the 'interface' mode
cannot be used since only one LDP session is actually set up between
the two neighbors.
When the value of this object is 'system', the system's IP address is
used to set up the LDP session between neighbors.
This value is only applicable to LDP IPv6 interfaces."
DEFVAL { system }
::= { vRtrLdpNgIfParamsEntry 11 }
vRtrLdpNgTargTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargTableLstCh indicates the last timestamp when
an entry in the vRtrLdpNgTargTable was last changed."
::= { tmnxLdpNgObjs 52 }
vRtrLdpNgTargTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgTargEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgTargTable keeps information applicable to the LDP targeted
peers.
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vRtrLdpNgGeneralTable, and the augmenting
table, vRtrLdpNgTargTable. This in effect extends the
vRtrLdpNgGeneralTable with additional columns. Creation or deletion
of a row in the vRtrLdpNgGeneralTable results in the same fate for the
row in the vRtrLdpNgTargTable."
::= { tmnxLdpNgObjs 53 }
vRtrLdpNgTargEntry OBJECT-TYPE
SYNTAX VRtrLdpNgTargEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents information applicable to the LDP
targeted peers in virtual router instance."
AUGMENTS { vRtrLdpNgGeneralEntry }
::= { vRtrLdpNgTargTable 1 }
VRtrLdpNgTargEntry ::= SEQUENCE
{
vRtrLdpNgTargRowLastCh TimeStamp,
vRtrLdpNgTargImportPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargImportPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargImportPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargImportPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargImportPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargExportPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargExportPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargExportPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargExportPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargExportPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgTargTunnelPreference TruthValue,
vRtrLdpNgTargetedSessions TruthValue,
vRtrLdpNgTargIPv4KAFactor TmnxLdpKeepAliveFactor,
vRtrLdpNgTargIPv6KAFactor TmnxLdpKeepAliveFactor,
vRtrLdpNgTargIPv4KATimeout TmnxLdpNewKeepAliveTimeout,
vRtrLdpNgTargIPv6KATimeout TmnxLdpNewKeepAliveTimeout,
vRtrLdpNgTargIPv4HelloFactor TmnxLdpHelloFactor,
vRtrLdpNgTargIPv6HelloFactor TmnxLdpHelloFactor,
vRtrLdpNgTargIPv4HelloTimeout TmnxLdpNewHelloTimeout,
vRtrLdpNgTargIPv6HelloTimeout TmnxLdpNewHelloTimeout,
vRtrLdpNgTargIPv4HelloReduction TruthValue,
vRtrLdpNgTargIPv6HelloReduction TruthValue,
vRtrLdpNgTargIPv4HelloReduceFctr Unsigned32,
vRtrLdpNgTargIPv6HelloReduceFctr Unsigned32,
vRtrLdpNgTargAutoTxV4AdminState TmnxAdminState,
vRtrLdpNgTargAutoTxV4Tunneling TruthValue,
vRtrLdpNgTargAutoRxV4AdminState TmnxAdminState,
vRtrLdpNgTargAutoRxV4Tunneling TruthValue
}
vRtrLdpNgTargRowLastCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargRowLastCh indicates the timestamp when this
row was last modified."
::= { vRtrLdpNgTargEntry 1 }
vRtrLdpNgTargImportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargImportPolicy1 specifies the import
route policy to determine which routes are accepted from targeted
LDP neighbors. A maximum of 5 policies can be specified.
vRtrLdpNgTargImportPolicy1 specifies the first policy."
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 2 }
vRtrLdpNgTargImportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargImportPolicy2 specifies the second import
policy used to determine which routes are accepted from targeted LDP
neighbors."
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 3 }
vRtrLdpNgTargImportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargImportPolicy3 specifies the third import
policy used to determine which routes are accepted from targeted LDP
neighbors."
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 4 }
vRtrLdpNgTargImportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargImportPolicy4 specifies the fourth import
policy to determine which routes are accepted from targeted LDP
neighbors."
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 5 }
vRtrLdpNgTargImportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargImportPolicy5 specifies the fifth import
policy used to determine which routes are accepted from targeted LDP
neighbors."
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 6 }
vRtrLdpNgTargExportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargExportPolicy1 specifies the export
route policy used to determine which routes are exported to this
targeted LDP session. A maximum of 5 policies can be specified.
vRtrLdpNgTargExportPolicy1 specifies the first policy."
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 7 }
vRtrLdpNgTargExportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargExportPolicy2 specifies the second export
policy used to determine which routes are exported to this targeted
LDP session"
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 8 }
vRtrLdpNgTargExportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargExportPolicy3 specifies the third export
policy used to determine which routes are exported to this targeted
LDP session."
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 9 }
vRtrLdpNgTargExportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargExportPolicy4 specifies the fourth export
policy used to determine which routes are exported to this targeted
LDP session."
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 10 }
vRtrLdpNgTargExportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargExportPolicy5 specifies the fifth export
policy used to determine which routes are exported to this targeted
LDP session."
DEFVAL { ''H }
::= { vRtrLdpNgTargEntry 11 }
vRtrLdpNgTargTunnelPreference OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargTunnelPreference indicates whether LDP over
tunnel is preferred when link-level LDP bindings are also available.
If this value is 'true', then LDP tunnels are preferred and if the
value is 'false' then LDP over tunnel is preferred.
By default LDP tunnels are preferred."
DEFVAL { true }
::= { vRtrLdpNgTargEntry 12 }
vRtrLdpNgTargetedSessions OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargetedSessions specifies whether or
not targeted sessions are allowed. Targeted sessions are LDP
sessions between indirectly connected peers. The discovery
messages for an indirect LDP session are addressed to the
specified peer instead of to the multicast address. When this
object has a value of 'true', targeted sessions are enabled.
When its value is 'false', targeted sessions are disabled."
DEFVAL { true }
::= { vRtrLdpNgTargEntry 13 }
vRtrLdpNgTargIPv4KAFactor OBJECT-TYPE
SYNTAX TmnxLdpKeepAliveFactor
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv4KAFactor specifies the value by which
the keepalive timeout (vRtrLdpNgTargKATimeout) should be divided to
give the keepalive time i.e. the time interval, in seconds, between
LDP keepalive messages. LDP keepalive messages are sent to keep the
LDP session from timing out when no other LDP traffic is being sent
between the neighbors.
This value is only applicable to IPv4 targeted LDP peer."
DEFVAL { 4 }
::= { vRtrLdpNgTargEntry 14 }
vRtrLdpNgTargIPv6KAFactor OBJECT-TYPE
SYNTAX TmnxLdpKeepAliveFactor
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv6KAFactor specifies the value by which
the keepalive timeout (vRtrLdpNgTargKATimeout) should be divided to
give the keepalive time i.e. the time interval, in seconds, between
LDP keepalive messages. LDP keepalive messages are sent to keep the
LDP session from timing out when no other LDP traffic is being sent
between the neighbors.
This value is only applicable to IPv6 targeted LDP peer."
DEFVAL { 4 }
::= { vRtrLdpNgTargEntry 15 }
vRtrLdpNgTargIPv4KATimeout OBJECT-TYPE
SYNTAX TmnxLdpNewKeepAliveTimeout
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv4KATimeout specifies the time interval,
in seconds, that LDP waits before tearing down a session. If no LDP
messages are exchanged during this time interval, the LDP session is
torn down. Generally the value of vRtrLdpNgTargIPv4KATimeout is
configured to be 3 times the keepalive time (the time interval between
successive LDP keepalive messages).
This value is only applicable to IPv4 LDP targeted peer."
DEFVAL { 40 }
::= { vRtrLdpNgTargEntry 16 }
vRtrLdpNgTargIPv6KATimeout OBJECT-TYPE
SYNTAX TmnxLdpNewKeepAliveTimeout
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv6KATimeout specifies the time interval,
in seconds, that LDP waits before tearing down a session. If no LDP
messages are exchanged during this time interval, the LDP session is
torn down. Generally the value of vRtrLdpNgTargIPv6KATimeout is
configured to be 3 times the keepalive time (the time interval between
successive LDP keepalive messages).
This value is only applicable to IPv6 LDP targeted peer."
DEFVAL { 40 }
::= { vRtrLdpNgTargEntry 17 }
vRtrLdpNgTargIPv4HelloFactor OBJECT-TYPE
SYNTAX TmnxLdpHelloFactor
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv4HelloFactor specifies the value by which
the hello timeout (vRtrLdpNgTargIPv4HelloTimeout) should be divided to
give the hello time i.e. the time interval, in seconds, between LDP
Hello messages. LDP uses hello messages to discover neighbors and to
detect loss of connectivity with its neighbors.
This value is only applicable to IPv4 LDP targeted peer."
DEFVAL { 3 }
::= { vRtrLdpNgTargEntry 18 }
vRtrLdpNgTargIPv6HelloFactor OBJECT-TYPE
SYNTAX TmnxLdpHelloFactor
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv6HelloFactor specifies the value by which
the hello timeout (vRtrLdpNgTargIPv6HelloTimeout) should be divided to
give the hello time i.e. the time interval, in seconds, between LDP
Hello messages. LDP uses hello messages to discover neighbors and to
detect loss of connectivity with its neighbors.
This value is only applicable to IPv6 LDP targeted peer."
DEFVAL { 3 }
::= { vRtrLdpNgTargEntry 19 }
vRtrLdpNgTargIPv4HelloTimeout OBJECT-TYPE
SYNTAX TmnxLdpNewHelloTimeout
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv4HelloTimeout specifies the hello time
also known as hold time. It is the time interval, in seconds, that LDP
waits before declaring a neighbor to be down. Hello timeout is local
to the system and is sent in the hello messages to a neighbor. Hello
timeout cannot be set to a value that is less than 3 times the hello
time.
This value is only applicable to IPv4 LDP targeted peer."
DEFVAL { 45 }
::= { vRtrLdpNgTargEntry 20 }
vRtrLdpNgTargIPv6HelloTimeout OBJECT-TYPE
SYNTAX TmnxLdpNewHelloTimeout
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv6HelloTimeout specifies the hello time
also known as hold time. It is the time interval, in seconds, that LDP
waits before declaring a neighbor to be down. Hello timeout is local
to the system and is sent in the hello messages to a neighbor. Hello
timeout cannot be set to a value that is less than 3 times the hello
time.
This value is only applicable to IPv6 LDP targeted peer."
DEFVAL { 45 }
::= { vRtrLdpNgTargEntry 21 }
vRtrLdpNgTargIPv4HelloReduction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv4HelloReduction specifies whether hello
reduction to this targeted peer is enabled or not. If enabled, the
sender advertises further dampened vRtrLdpNgTargIPv4HelloTimeout, to
the targeted peer after LDP session is established.
The value of 'true' means targeted hello reduction is enabled."
DEFVAL { false }
::= { vRtrLdpNgTargEntry 22 }
vRtrLdpNgTargIPv6HelloReduction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv6HelloReduction specifies whether hello
reduction to this targeted peer is enabled or not. If enabled, the
sender advertises further dampened vRtrLdpNgTargIPv6HelloTimeout, to
the targeted peer after LDP session is established.
The value of 'true' means targeted hello reduction is enabled."
DEFVAL { false }
::= { vRtrLdpNgTargEntry 23 }
vRtrLdpNgTargIPv4HelloReduceFctr OBJECT-TYPE
SYNTAX Unsigned32 (3..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv4HelloReduceFctr specifies the number of
hello messages that are sent at consistent
vRtrLdpNgTargIPv4HelloTimeout, before advertising further dampened
vRtrLdpNgTargIPv4HelloTimeout.
An 'inconsistentValue' error is returned if this object is set when
vRtrLdpNgTargIPv4HelloReduction is disabled."
DEFVAL { 3 }
::= { vRtrLdpNgTargEntry 24 }
vRtrLdpNgTargIPv6HelloReduceFctr OBJECT-TYPE
SYNTAX Unsigned32 (3..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargIPv6HelloReduceFctr specifies the number of
hello messages that are sent at consistent
vRtrLdpNgTargIPv6HelloTimeout, before advertising further dampened
vRtrLdpNgTargIPv6HelloTimeout.
An 'inconsistentValue' error is returned if this object is set when
vRtrLdpNgTargIPv6HelloReduction is disabled."
DEFVAL { 3 }
::= { vRtrLdpNgTargEntry 25 }
vRtrLdpNgTargAutoTxV4AdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargAutoTxV4AdminState specifies whether
automatic IPv4 TX targeted sessions are created or not. When this
object is administratively up, automatic targeted sessions are created
to the PQ router ID of each route that contains remote LFA
information. When this object is administratively down, automatic
targeted sessions are not created to the PQ router IDs."
DEFVAL { outOfService }
::= { vRtrLdpNgTargEntry 27 }
vRtrLdpNgTargAutoTxV4Tunneling OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargAutoTxV4Tunneling specifies whether
tunneling of unicast LDP FECs over tunnels is enabled for the
automatic IPv4 TX targeted sessions. When this object has a value of
'true', tunneling is enabled. When its value is 'false', tunneling is
disabled."
DEFVAL { false }
::= { vRtrLdpNgTargEntry 28 }
vRtrLdpNgTargAutoRxV4AdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargAutoRxV4AdminState specifies whether
automatic IPv4 RX targeted sessions are created or not. When this
object is administratively up, the reception of an unhandled IPv4
targeted hello message causes the creation of automatic targeted
session to the source peer of the hello message. When this object is
administratively down, automatic targeted sessions are not created for
unhandled IPv4 targeted hello messages."
DEFVAL { outOfService }
::= { vRtrLdpNgTargEntry 29 }
vRtrLdpNgTargAutoRxV4Tunneling OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgTargAutoRxV4Tunneling specifies whether
tunneling of unicast LDP FECs over tunnels is enabled for the
automatic IPv4 RX targeted sessions. When this object has a value of
'true', tunneling is enabled. When its value is 'false', tunneling is
disabled."
DEFVAL { false }
::= { vRtrLdpNgTargEntry 30 }
vRtrLdpNgAggrPreMatchTableLstCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAggrPreMatchTableLstCh indicates the last
timestamp when an entry in the vRtrLdpNgAggrPreMatchTable was last
changed."
::= { tmnxLdpNgObjs 54 }
vRtrLdpNgAggrPreMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgAggrPreMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgAggrPreMatchTable keeps information about aggregate prefix
match procedures.
Use of AUGMENTS clause implies a one-to-one dependent
relationship between the base table, vRtrLdpNgGeneralTable,
and the augmenting table, vRtrLdpNgAggrPreMatchTable. This in
effect extends the vRtrLdpNgGeneralTable with additional
columns. Creation or deletion of a row in the
vRtrLdpNgGeneralTable results in the same fate for the row
in the vRtrLdpNgAggrPreMatchTable."
REFERENCE
"RFC5283 LDP Extension for Inter-Area Label Switched Paths (LSPs)"
::= { tmnxLdpNgObjs 55 }
vRtrLdpNgAggrPreMatchEntry OBJECT-TYPE
SYNTAX VRtrLdpNgAggrPreMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents information about the aggregate prefix
match procedures."
AUGMENTS { vRtrLdpNgGeneralEntry }
::= { vRtrLdpNgAggrPreMatchTable 1 }
VRtrLdpNgAggrPreMatchEntry ::= SEQUENCE
{
vRtrLdpNgAggrPreMatchRowLastCh TimeStamp,
vRtrLdpNgAggrPreMatchEnabled TruthValue,
vRtrLdpNgAggrPreMatchExcPolicy1 TPolicyStatementNameOrEmpty,
vRtrLdpNgAggrPreMatchExcPolicy2 TPolicyStatementNameOrEmpty,
vRtrLdpNgAggrPreMatchExcPolicy3 TPolicyStatementNameOrEmpty,
vRtrLdpNgAggrPreMatchExcPolicy4 TPolicyStatementNameOrEmpty,
vRtrLdpNgAggrPreMatchExcPolicy5 TPolicyStatementNameOrEmpty,
vRtrLdpNgAggrPreMatchAdminState TmnxAdminState
}
vRtrLdpNgAggrPreMatchRowLastCh OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAggrPreMatchRowLastCh indicates the timestamp
when this row was last modified."
::= { vRtrLdpNgAggrPreMatchEntry 1 }
vRtrLdpNgAggrPreMatchEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAggrPreMatchEnabled specifies whether aggregate
prefix match procedures are enabled."
DEFVAL { false }
::= { vRtrLdpNgAggrPreMatchEntry 2 }
vRtrLdpNgAggrPreMatchExcPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAggrPreMatchExcPolicy1 specifies the policy name
containing the prefixes to be excluded from the aggregate prefix match
procedures. A maximum of 5 policies can be specified.
vRtrLdpNgAggrPreMatchExcPolicy1 specifies the first policy."
DEFVAL { ''H }
::= { vRtrLdpNgAggrPreMatchEntry 3 }
vRtrLdpNgAggrPreMatchExcPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAggrPreMatchExcPolicy2 specifies the second
policy name containing the prefixes to be excluded from the aggregate
prefix match procedures."
DEFVAL { ''H }
::= { vRtrLdpNgAggrPreMatchEntry 4 }
vRtrLdpNgAggrPreMatchExcPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAggrPreMatchExcPolicy3 specifies the third
policy name containing the prefixes to be excluded from the aggregate
prefix match procedures."
DEFVAL { ''H }
::= { vRtrLdpNgAggrPreMatchEntry 5 }
vRtrLdpNgAggrPreMatchExcPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAggrPreMatchExcPolicy4 specifies the fourth
policy name containing the prefixes to be excluded from the aggregate
prefix match procedures."
DEFVAL { ''H }
::= { vRtrLdpNgAggrPreMatchEntry 6 }
vRtrLdpNgAggrPreMatchExcPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAggrPreMatchExcPolicy5 specifies the fifth
policy name containing the prefixes to be excluded from the aggregate
prefix match procedures."
DEFVAL { ''H }
::= { vRtrLdpNgAggrPreMatchEntry 7 }
vRtrLdpNgAggrPreMatchAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgAggrPreMatchAdminState specifies whether the
aggregate prefix procedures will be used by LDP."
DEFVAL { outOfService }
::= { vRtrLdpNgAggrPreMatchEntry 8 }
tmnxLdpNgNotificationObjects OBJECT IDENTIFIER ::= { tmnxLdpNgObjs 56 }
vRtrLdpNgSessOperThresLevel OBJECT-TYPE
SYNTAX INTEGER {
up (0),
down (1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessOperThresLevel indicates whether the number
of fec-bindings has exceeded or is below the configured fec threshold."
::= { tmnxLdpNgNotificationObjects 1 }
vRtrLdpNgInstNotifyReasonCode OBJECT-TYPE
SYNTAX INTEGER {
adminUp (1),
adminDown (2),
operUp (3),
operDown (4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrLdpNgInstNotifyReasonCode indicates the reason for
the LDP instance state change."
::= { tmnxLdpNgNotificationObjects 2 }
vRtrLdpNgSessOverloadState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessOverloadState indicates if session is
overload or not."
::= { tmnxLdpNgNotificationObjects 3 }
vRtrLdpNgSessOverloadDirection OBJECT-TYPE
SYNTAX INTEGER {
sent (1),
received (2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessOverloadDirection indicates if the LDP
Overload Notification message is sent to or received from the peer."
::= { tmnxLdpNgNotificationObjects 4 }
vRtrLdpNgSessOverloadFecType OBJECT-TYPE
SYNTAX INTEGER {
prefixes (1),
p2mp (2),
svcFec128 (3),
svcFec129 (4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessOverloadFecType indicates the overloaded FEC
type."
::= { tmnxLdpNgNotificationObjects 5 }
vRtrLdpNgSessOvldFecTypeSubTyp OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (1),
ipv6 (2),
allVcType (3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrLdpNgSessOvldFecTypeSubTyp indicates the sub type for
overloaded FEC type."
::= { tmnxLdpNgNotificationObjects 6 }
vLdpNgAddrActiveFecTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgAddrActiveFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vLdpNgAddrActiveFecTable is a read-only table that represents all
active in data plane address FECs either sent to or received from an
LDP peer known to the Virtual Router."
::= { tmnxLdpNgObjs 57 }
vLdpNgAddrActiveFecEntry OBJECT-TYPE
SYNTAX VLdpNgAddrActiveFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of an active in data plane
address FEC sent to or received from an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgAddrFecFecType,
vRtrLdpNgAddrFecIpPrefixType,
vRtrLdpNgAddrFecIpPrefix,
vRtrLdpNgAddrFecIpPrefixLen,
vLdpNgAddrActiveFecOpType
}
::= { vLdpNgAddrActiveFecTable 1 }
VLdpNgAddrActiveFecEntry ::= SEQUENCE
{
vLdpNgAddrActiveFecOpType INTEGER,
vLdpNgAddrActiveFecFecFlags TmnxLdpFECFlags,
vLdpNgAddrActiveFecNumInLbls Unsigned32,
vLdpNgAddrActiveFecNumOutLbls Unsigned32
}
vLdpNgAddrActiveFecOpType OBJECT-TYPE
SYNTAX INTEGER {
pop (1),
push (2),
swap (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOpType indicates operation type of
this FEC."
::= { vLdpNgAddrActiveFecEntry 1 }
vLdpNgAddrActiveFecFecFlags OBJECT-TYPE
SYNTAX TmnxLdpFECFlags
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit flags of vLdpNgAddrActiveFecFecFlags indicates the
characteristics of the FEC."
::= { vLdpNgAddrActiveFecEntry 2 }
vLdpNgAddrActiveFecNumInLbls OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecNumInLbls indicates the number of
labels that have been sent to the peer associated with this FEC."
::= { vLdpNgAddrActiveFecEntry 3 }
vLdpNgAddrActiveFecNumOutLbls OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecNumOutLbls indicates the number of
labels that have been received from the peer associated with this FEC."
::= { vLdpNgAddrActiveFecEntry 4 }
vLdpNgAddrActiveFecInLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgAddrActiveFecInLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vLdpNgAddrActiveFecInLblTable is a read-only table that represents all
active in data plane address FECs received from an LDP peer known to
the Virtual Router."
::= { tmnxLdpNgObjs 58 }
vLdpNgAddrActiveFecInLblEntry OBJECT-TYPE
SYNTAX VLdpNgAddrActiveFecInLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of an active in data plane
address FEC received from an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgAddrFecFecType,
vRtrLdpNgAddrFecIpPrefixType,
vRtrLdpNgAddrFecIpPrefix,
vRtrLdpNgAddrFecIpPrefixLen,
vLdpNgAddrActiveFecOpType,
vLdpNgAddrActiveFecInLblId
}
::= { vLdpNgAddrActiveFecInLblTable 1 }
VLdpNgAddrActiveFecInLblEntry ::= SEQUENCE
{
vLdpNgAddrActiveFecInLblId Unsigned32,
vLdpNgAddrActiveFecInLbl Unsigned32,
vLdpNgAddrActiveFecInLblIfIndex InterfaceIndexOrZero
}
vLdpNgAddrActiveFecInLblId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecInLblId indicates the label number of
the ingress label exchanged."
::= { vLdpNgAddrActiveFecInLblEntry 1 }
vLdpNgAddrActiveFecInLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecInLbl indicates the ingress label
exchanged."
::= { vLdpNgAddrActiveFecInLblEntry 2 }
vLdpNgAddrActiveFecInLblIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecInLblIfIndex indicates the interface
index for ingress label."
::= { vLdpNgAddrActiveFecInLblEntry 3 }
vLdpNgAddrActiveFecOutLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLdpNgAddrActiveFecOutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vLdpNgAddrActiveFecOutLblTable is a read-only table that represents
all active in data plane address FECs received from an LDP peer known
to the Virtual Router."
::= { tmnxLdpNgObjs 59 }
vLdpNgAddrActiveFecOutLblEntry OBJECT-TYPE
SYNTAX VLdpNgAddrActiveFecOutLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of an active in data plane
address FEC received from an LDP peer."
INDEX {
vRtrID,
vRtrLdpNgAddrFecFecType,
vRtrLdpNgAddrFecIpPrefixType,
vRtrLdpNgAddrFecIpPrefix,
vRtrLdpNgAddrFecIpPrefixLen,
vLdpNgAddrActiveFecOpType,
vLdpNgAddrActiveFecOutLblId
}
::= { vLdpNgAddrActiveFecOutLblTable 1 }
VLdpNgAddrActiveFecOutLblEntry ::= SEQUENCE
{
vLdpNgAddrActiveFecOutLblId Unsigned32,
vLdpNgAddrActiveFecOutLbl Unsigned32,
vLdpNgAddrActiveFecOutLblStatus TmnxLabelStatus,
vLdpNgAddrActiveFecOutLblIfIdx InterfaceIndexOrZero,
vLdpNgAddrActiveFecOutLblNHType InetAddressType,
vLdpNgAddrActiveFecOutLblNHAddr InetAddress,
vLdpNgAddrActiveFecOutLblMetric Unsigned32,
vLdpNgAddrActiveFecOutLblMtu Unsigned32,
vLdpNgAddrActiveFecOutLblLspId Unsigned32,
vLdpNgAddrActiveFecOutLblCBF TmnxCBFClasses
}
vLdpNgAddrActiveFecOutLblId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLblId indicates the label number of
the egress label exchanged."
::= { vLdpNgAddrActiveFecOutLblEntry 1 }
vLdpNgAddrActiveFecOutLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLbl indicates the egress label
exchanged"
::= { vLdpNgAddrActiveFecOutLblEntry 2 }
vLdpNgAddrActiveFecOutLblStatus OBJECT-TYPE
SYNTAX TmnxLabelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLblStatus indicates the status of
the egress label."
::= { vLdpNgAddrActiveFecOutLblEntry 3 }
vLdpNgAddrActiveFecOutLblIfIdx OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLblIfIdx indicates the interface
index for egress label."
::= { vLdpNgAddrActiveFecOutLblEntry 4 }
vLdpNgAddrActiveFecOutLblNHType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLblNHType indicates the address
type of vLdpNgAddrActiveFecOutLblNHAddr."
::= { vLdpNgAddrActiveFecOutLblEntry 5 }
vLdpNgAddrActiveFecOutLblNHAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLblNHAddr indicates the IP address
of the next hop for egress label."
::= { vLdpNgAddrActiveFecOutLblEntry 6 }
vLdpNgAddrActiveFecOutLblMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLblMetric indicates the relative
cost of the tunnel represented by this address FEC egress label."
::= { vLdpNgAddrActiveFecOutLblEntry 7 }
vLdpNgAddrActiveFecOutLblMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLblMtu indicates the maximum
transfer unit for payloads represented by this address FEC egress
label."
::= { vLdpNgAddrActiveFecOutLblEntry 8 }
vLdpNgAddrActiveFecOutLblLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLblLspId indicates the LSP id
associated with egress label."
::= { vLdpNgAddrActiveFecOutLblEntry 9 }
vLdpNgAddrActiveFecOutLblCBF OBJECT-TYPE
SYNTAX TmnxCBFClasses
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vLdpNgAddrActiveFecOutLblCBF indicates (if
vRtrLdpNgAddrFecOutLblLspId is non-zero) the forwarding classes
installed for the RSVP tunnel used by LDP in LDP over RSVP associated
with egress label.
If bit is set to 8, it indicates if the LSP for the RSVP tunnel used
by LDP in LDP over RSVP associated with egress label is used as the
class-based-forwarding default."
::= { vLdpNgAddrActiveFecOutLblEntry 10 }
vRtrLdpNgBfdOnLspPfxListTabLastC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListTabLastC indicates the elapsed
time (since system startup) of the most recent change to
vRtrLdpNgBfdOnLspPfxListTable. If there has been no change to
vRtrLdpNgBfdOnLspPfxListTable since system startup, 0 is returned."
::= { tmnxLdpNgObjs 60 }
vRtrLdpNgBfdOnLspPfxListTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgBfdOnLspPfxListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgBfdOnLspPfxListTable contains configuration information for
Bidirectional Forwarding Detection (BFD) on LDP LSPs."
REFERENCE
"RFC 5884, 'Bidirectional Forwarding Detection (BFD) for MPLS Label
Switched Paths (LSPs)', June 2010."
::= { tmnxLdpNgObjs 61 }
vRtrLdpNgBfdOnLspPfxListEntry OBJECT-TYPE
SYNTAX VRtrLdpNgBfdOnLspPfxListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgBfdOnLspPfxListEntry contains configuration information for
BFD on LDP LSPs, as configured against a virtual router identifier and
a router policy prefix list.
Rows are created and destroyed using vRtrLdpNgBfdOnLspPfxListRowStat.
At most 16 rows are supported per virtual router identifier."
INDEX {
vRtrID,
vRtrLdpNgBfdOnLspPfxListName
}
::= { vRtrLdpNgBfdOnLspPfxListTable 1 }
VRtrLdpNgBfdOnLspPfxListEntry ::= SEQUENCE
{
vRtrLdpNgBfdOnLspPfxListName TNamedItem,
vRtrLdpNgBfdOnLspPfxListRowStat RowStatus,
vRtrLdpNgBfdOnLspPfxListLastChgd TimeStamp,
vRtrLdpNgBfdOnLspPfxListTmplName TNamedItemOrEmpty,
vRtrLdpNgBfdOnLspPfxListEnable TruthValue,
vRtrLdpNgBfdOnLspPfxListPingIntv Unsigned32,
vRtrLdpNgBfdOnLspPfxListSrcAddrT InetAddressType,
vRtrLdpNgBfdOnLspPfxListSrcAddr InetAddress,
vRtrLdpNgBfdOnLspPfxListFailAct INTEGER,
vRtrLdpNgBfdOnLspPfxListPriority Unsigned32
}
vRtrLdpNgBfdOnLspPfxListName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListName specifies the prefix list
name index of the row.
The prefix list name should match a router policy prefix list name
created using TIMETRA-ROUTE-POLICY-MIB::tRPOperPfxListNameRowStatus.
When this prefix list name does not match a router policy prefix list
name, this row is ignored."
::= { vRtrLdpNgBfdOnLspPfxListEntry 1 }
vRtrLdpNgBfdOnLspPfxListRowStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListRowStat specifies the status of
this row."
::= { vRtrLdpNgBfdOnLspPfxListEntry 2 }
vRtrLdpNgBfdOnLspPfxListLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListLastChgd indicates the elapsed
time (since system startup) of the most recent change to this row. If
there has been no change to this row since system startup, 0 is
returned."
::= { vRtrLdpNgBfdOnLspPfxListEntry 3 }
vRtrLdpNgBfdOnLspPfxListTmplName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListTmplName specifies the BFD
template to be used by BFD sessions configured using this row. The
template name must match a template name created using
TIMETRA-BFD-MIB::tmnxBfdOperTemplateRowStatus."
DEFVAL { "" }
::= { vRtrLdpNgBfdOnLspPfxListEntry 4 }
vRtrLdpNgBfdOnLspPfxListEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListEnable specifies whether or not
to enable BFD sessions configured using this row."
DEFVAL { false }
::= { vRtrLdpNgBfdOnLspPfxListEntry 5 }
vRtrLdpNgBfdOnLspPfxListPingIntv OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..300)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListPingIntv specifies the transmit
interval of LSP ping packets used for periodic verification. When this
object is set to zero, transmission is disabled."
DEFVAL { 60 }
::= { vRtrLdpNgBfdOnLspPfxListEntry 6 }
vRtrLdpNgBfdOnLspPfxListSrcAddrT OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListSrcAddrT specifies the address
type of vRtrLdpNgBfdOnLspPfxListSrcAddr."
DEFVAL { unknown }
::= { vRtrLdpNgBfdOnLspPfxListEntry 7 }
vRtrLdpNgBfdOnLspPfxListSrcAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListSrcAddr specifies the source
address to be used in LSP ping packets and BFD control packets
transmitted for BFD sessions configured using this row.
When vRtrLdpNgBfdOnLspPfxListSrcAddrT and
vRtrLdpNgBfdOnLspPfxListSrcAddr are default, the system IP address is
transmitted."
DEFVAL { ''H }
::= { vRtrLdpNgBfdOnLspPfxListEntry 8 }
vRtrLdpNgBfdOnLspPfxListFailAct OBJECT-TYPE
SYNTAX INTEGER {
none (0),
down (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListFailAct specifies the action to
be taken when a BFD session configured using this row fails.
When vRtrLdpNgBfdOnLspPfxListFailAct is set to 'down(1)', a BFD
session failure marks its LSP as no longer available as a transport
for user traffic."
DEFVAL { none }
::= { vRtrLdpNgBfdOnLspPfxListEntry 9 }
vRtrLdpNgBfdOnLspPfxListPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPfxListPriority specifies the priority of
the prefix list specified by the indices. The priority is used when
searching the set of configured prefix lists for a prefix. For
example, a prefix list with priority 1 is searched before a prefix list
with priority 2."
DEFVAL { 1 }
::= { vRtrLdpNgBfdOnLspPfxListEntry 10 }
vRtrLdpNgP2MPFecStitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgP2MPFecStitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrLdpNgP2MPFecStitchTable is a read-only table that represents
the stitch relationship of a lower FEC and its upper FECs"
::= { tmnxLdpNgObjs 62 }
vRtrLdpNgP2MPFecStitchEntry OBJECT-TYPE
SYNTAX VRtrLdpNgP2MPFecStitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents either the lower P2MP FEC if it is stitched,
or the stitched upper P2MP FEC."
INDEX {
vRtrID,
vRtrLdpNgExtP2MPFecRootAddrType,
vRtrLdpNgExtP2MPFecRootAddress,
vRtrLdpNgExtP2MPFecOpaqueType,
vRtrLdpNgExtP2MPFecOpaqueLength,
vRtrLdpNgExtP2MPFecOpaqueValue,
vRtrLdpNgP2MPFecStitchType
}
::= { vRtrLdpNgP2MPFecStitchTable 1 }
VRtrLdpNgP2MPFecStitchEntry ::= SEQUENCE
{
vRtrLdpNgP2MPFecStitchType INTEGER,
vRtrLdpNgP2MPStitchRootAddrType InetAddressType,
vRtrLdpNgP2MPStitchRootAddress InetAddress,
vRtrLdpNgP2MPFecStitchOpaqueTyp Unsigned32,
vRtrLdpNgP2MPFecStitchOpaqueLen Unsigned32,
vRtrLdpNgP2MPFecStitchOpaqueVal OCTET STRING
}
vRtrLdpNgP2MPFecStitchType OBJECT-TYPE
SYNTAX INTEGER {
lowerFec (1),
primUpperFec (2),
mbbUpperFec (3),
bkpUpperFec (4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgP2MPFecStitchType indicates the stitching
relationship between the lower and upper FEC."
::= { vRtrLdpNgP2MPFecStitchEntry 1 }
vRtrLdpNgP2MPStitchRootAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgP2MPStitchRootAddrType indicates the type of ip
address of the root for the P2MP FEC."
::= { vRtrLdpNgP2MPFecStitchEntry 2 }
vRtrLdpNgP2MPStitchRootAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgP2MPStitchRootAddress indicates the ip address
of the root for the P2MP FEC."
::= { vRtrLdpNgP2MPFecStitchEntry 3 }
vRtrLdpNgP2MPFecStitchOpaqueTyp OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgP2MPFecStitchOpaqueTyp indicates the type of a
Multi-Point Opaque Value Element."
::= { vRtrLdpNgP2MPFecStitchEntry 4 }
vRtrLdpNgP2MPFecStitchOpaqueLen OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgP2MPFecStitchOpaqueLen indicates the length of a
Multi-Point Opaque Value Element."
::= { vRtrLdpNgP2MPFecStitchEntry 5 }
vRtrLdpNgP2MPFecStitchOpaqueVal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..74))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgP2MPFecStitchOpaqueVal indicates the value of a
Multi-Point Opaque Value Element."
::= { vRtrLdpNgP2MPFecStitchEntry 6 }
vRtrLdpNgBfdOnLspPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrLdpNgBfdOnLspPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgBfdOnLspPrefixTable contains operational information for IP
prefixes used with Bidirectional Forwarding Detection (BFD) on LDP
LSPs."
REFERENCE
"RFC 5884, 'Bidirectional Forwarding Detection (BFD) for MPLS Label
Switched Paths (LSPs)', June 2010."
::= { tmnxLdpNgObjs 63 }
vRtrLdpNgBfdOnLspPrefixEntry OBJECT-TYPE
SYNTAX VRtrLdpNgBfdOnLspPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrLdpNgBfdOnLspPrefixEntry contains operational information for an
IP prefix used with BFD on LDP LSPs.
A row is created/destroyed by the system when a prefix becomes
available/unavailable for use with BFD on an LDP LSP."
INDEX {
vRtrID,
vRtrLdpNgBfdOnLspPfxListName,
vRtrLdpNgBfdOnLspPrefixType,
vRtrLdpNgBfdOnLspPrefix,
vRtrLdpNgBfdOnLspPrefixLen
}
::= { vRtrLdpNgBfdOnLspPrefixTable 1 }
VRtrLdpNgBfdOnLspPrefixEntry ::= SEQUENCE
{
vRtrLdpNgBfdOnLspPrefixType TmnxAddressAndPrefixType,
vRtrLdpNgBfdOnLspPrefix TmnxAddressAndPrefixAddress,
vRtrLdpNgBfdOnLspPrefixLen TmnxAddressAndPrefixPrefix,
vRtrLdpNgBfdOnLspPrefixOperState INTEGER
}
vRtrLdpNgBfdOnLspPrefixType OBJECT-TYPE
SYNTAX TmnxAddressAndPrefixType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPrefixType specifies the address type of
vRtrLdpNgBfdOnLspPrefix."
::= { vRtrLdpNgBfdOnLspPrefixEntry 1 }
vRtrLdpNgBfdOnLspPrefix OBJECT-TYPE
SYNTAX TmnxAddressAndPrefixAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPrefix (in conjunction with
vRtrLdpNgBfdOnLspPrefixType and vRtrLdpNgBfdOnLspPrefixLen) specifies
the IP prefix to be read."
::= { vRtrLdpNgBfdOnLspPrefixEntry 2 }
vRtrLdpNgBfdOnLspPrefixLen OBJECT-TYPE
SYNTAX TmnxAddressAndPrefixPrefix (0..128)
UNITS "bits"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPrefixLen specifies the number of
significant bits in vRtrLdpNgBfdOnLspPrefix."
::= { vRtrLdpNgBfdOnLspPrefixEntry 3 }
vRtrLdpNgBfdOnLspPrefixOperState OBJECT-TYPE
SYNTAX INTEGER {
invalid (0),
noMatch (1),
disabled (2),
srcAddrMissing (3),
srcAddrMismatch (4),
up (5),
down (6),
downTrapOnly (7),
srcDstAddrSame (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrLdpNgBfdOnLspPrefixOperState indicates the
operational state of the prefix for use by BFD on LDP LSPs.
Code points:
invalid - Invalid state (unexpected).
noMatch - The prefix has not been matched to a prefix list.
disabled - The LSP BFD configuration is not enabled, or there
is no tunnel for the prefix.
srcAddrMissing - There is no LDP LSRID for the address family.
srcAddrMismatch - The address family of the prefix doesn't match the
address family of the source address configured in
the matched LSP-BFD prefix list.
up - LSP BFD is operationally up for the prefix.
down - LSP BFD is operationally down for the prefix, and the
configured failure-action (i.e.
vRtrLdpNgBfdOnLspPfxListFailAct) is 'down(1)'.
downTrapOnly - LSP BFD is operationally down for the prefix, and the
configured failure-action (i.e.
vRtrLdpNgBfdOnLspPfxListFailAct) is 'none(0)'.
srcDstAddrSame - The address of the prefix is the same as the source
address."
::= { vRtrLdpNgBfdOnLspPrefixEntry 4 }
tmnxLdpNgConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 91 }
tmnxLdpNgCompliances OBJECT IDENTIFIER ::= { tmnxLdpNgConformance 1 }
tmnxLdpNgV12v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended LDP on Nokia SROS
series systems 12.0 release."
MODULE
MANDATORY-GROUPS {
tmnxLdpNgIfV12v0Group,
tmnxLdpNgAdjV12v0Group,
tmnxLdpNgSessionV12v0Group,
tmnxLdpNgPeerParamsV12v0Group,
tmnxLdpNgAddrFecV12v0Group,
tmnxLdpNgP2MPFecV12v0Group,
tmnxLdpNgServFecV12v0Group,
tmnxLdpNgFec129V12v0Group,
tmnxLdpNgCepTdmFecV12v0Group,
tmnxLdpNgStaticFecV12v0Group,
tmnxLdpNgSessionStatsV12v0Group,
tmnxLdpNgTargPeerV12v0Group,
tmnxLdpNgInetIfV12v0Group,
tmnxLdpNgStatsV12v0Group,
tmnxLdpNgCapabilityV12v0Group,
tmnxLdpNgTcpSessParamsV12v0Group,
tmnxLdpNgGeneralV12v0Group,
tmnxLdpNgPolicyV12v0Group,
tmnxLdpNgIfParamsV12v0Group,
tmnxLdpNgTargetedPeerV12v0Group,
tmnxLdpNgAggrPreMatchV12v0Group
}
::= { tmnxLdpNgCompliances 1 }
tmnxLdpNgV13v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended LDP on Nokia SROS
series systems 13.0 release."
MODULE
MANDATORY-GROUPS {
tmnxLdpNgIfV12v0Group,
tmnxLdpNgAdjV12v0Group,
tmnxLdpNgSessionV12v0Group,
tmnxLdpNgPeerParamsV12v0Group,
tmnxLdpNgAddrFecV12v0Group,
tmnxLdpNgP2MPFecV12v0Group,
tmnxLdpNgServFecV12v0Group,
tmnxLdpNgFec129V12v0Group,
tmnxLdpNgCepTdmFecV12v0Group,
tmnxLdpNgStaticFecV12v0Group,
tmnxLdpNgSessionStatsV12v0Group,
tmnxLdpNgTargPeerV12v0Group,
tmnxLdpNgInetIfV12v0Group,
tmnxLdpNgStatsV12v0Group,
tmnxLdpNgCapabilityV12v0Group,
tmnxLdpNgTcpSessParamsV12v0Group,
tmnxLdpNgGeneralV12v0Group,
tmnxLdpNgPolicyV12v0Group,
tmnxLdpNgIfParamsV12v0Group,
tmnxLdpNgTargetedPeerV12v0Group,
tmnxLdpNgAggrPreMatchV12v0Group,
tmnxLdpNgFecLimPerPeerV13v0Group,
tmnxLdpNgNotificationGroup,
tmnxLdpNgSessParamPeerV13v0Group,
tmnxLdpNgTcpSessParamsV13v0Group,
tmnxLdpNgNotifyObjs,
tmnxLdpNgHelloAdjV13v0Group,
tmnxLdpNgTargPeerV13v0Group,
tmnxLdpNgInetIfV13v0Group,
tmnxLdpNgAddrActiveFecV13v0Group,
tmnxLdpNgGeneralV13v0Group,
tmnxLdpNgRecvFecCapV13v0Group
}
::= { tmnxLdpNgCompliances 2 }
tmnxLdpNgV14v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended LDP on Nokia SROS
series systems 14.0 release."
MODULE
MANDATORY-GROUPS {
tmnxLdpNgGeneralEliV14v0Group,
tmnxLdpNgIfV14v0Group,
tmnxLdpNgTargPeerV14v0Group,
tmnxLdpNgGeneralFrrV14v0Group,
tmnxLdpNgSessV14v0Group,
tmnxLdpNgLegacyInteropGrp
}
::= { tmnxLdpNgCompliances 3 }
tmnxLdpNgV15v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended LDP on Nokia SROS
series systems release 15.0."
MODULE
MANDATORY-GROUPS {
tmnxLdpNgBfdOnLspGroup,
tmnxLdpNgNonRecFecGroup,
tmnxLdpNgIpV632BitLsridGroup,
tmnxLdpNgSessParamAdvertGroup,
tmnxLdpNgSessParamCommunityGroup,
tmnxLdpNgMcastUpstrmAsbrFrrGroup
}
::= { tmnxLdpNgCompliances 4 }
tmnxLdpNgV16v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended LDP on Nokia SROS
series systems release 16.0."
MODULE
MANDATORY-GROUPS {
tmnxLdpNgResolveRootUsingGroup,
tmnxLdpNgWeightedEcmpGroup,
tmnxLdpNgSysIpFecPolicyGroup,
tmnxLdpNgPolicyV16v0Group,
tmnxLdpNgCBFV16v0Group
}
::= { tmnxLdpNgCompliances 5 }
tmnxLdpNgV19v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended LDP on Nokia SROS
series systems release 19.0."
MODULE
MANDATORY-GROUPS {
tmnxLdpNgImportPmsiRoutesGroup,
tmnxLdpNgPolicyV19v0Group,
tmnxLdpNgIntfWeightedEcmpGroup,
tmnxLdpNgEcmpGroup
}
::= { tmnxLdpNgCompliances 6 }
tmnxLdpNgV20v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended LDP on Nokia SROS
series systems release 20.0."
MODULE
MANDATORY-GROUPS {
tmnxLdpTargAutoTldpV20v0Group
}
::= { tmnxLdpNgCompliances 7 }
tmnxLdpNgGroups OBJECT IDENTIFIER ::= { tmnxLdpNgConformance 2 }
tmnxLdpNgIfV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgIfTableLstChanged,
vRtrLdpNgIfRowStatus,
vRtrLdpNgIfLastChange,
vRtrLdpNgIfAdminState,
vRtrLdpNgIfOperState,
vRtrLdpNgIfOperDownReason,
vRtrLdpNgIfBfdEnabled,
vRtrLdpNgInetIfStatsExistingAdj
}
STATUS current
DESCRIPTION
"The group of objects supporting general management of extended LDP
interfaces on Nokia SROS series systems 12.0 release."
::= { tmnxLdpNgGroups 1 }
tmnxLdpNgAdjV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgHelloAdjLclLdpIdType,
vRtrLdpNgHelloAdjLclLdpId,
vRtrLdpNgHelloAdjEntityIndex,
vRtrLdpNgHelloAdjIndex,
vRtrLdpNgHelloAdjHoldTimeRem,
vRtrLdpNgHelloAdjType,
vRtrLdpNgHelloAdjRemConfSeqNum,
vRtrLdpNgHelloAdjRemIpAddrType,
vRtrLdpNgHelloAdjRemIpAddress,
vRtrLdpNgHelloAdjUpTime,
vRtrLdpNgHelloAdjLclConfSeqNum,
vRtrLdpNgHelloAdjLclIpAddrType,
vRtrLdpNgHelloAdjLclIpAddress,
vRtrLdpNgHelloAdjInHelloMsgCnt,
vRtrLdpNgHelloAdjOutHelloMsgCnt,
vRtrLdpNgHelloAdjLclTimeout,
vRtrLdpNgHelloAdjRemTimeout,
vRtrLdpNgHelloAdjBfdStatus,
vRtrLdpNgHelloAdjMapIndex
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP Adjacencies
for LDP sessions on Nokia SROS series systems 12.0 Release."
::= { tmnxLdpNgGroups 2 }
tmnxLdpNgSessionV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgSessLocalLdpIdType,
vRtrLdpNgSessLocalLdpId,
vRtrLdpNgSessEntityIndex,
vRtrLdpNgSessLabelDistMethod,
vRtrLdpNgSessLoopDetectForPV,
vRtrLdpNgSessPathVectorLimit,
vRtrLdpNgSessState,
vRtrLdpNgSessAdjacencyType,
vRtrLdpNgSessProtocolVersion,
vRtrLdpNgSessLocalUdpPort,
vRtrLdpNgSessPeerUdpPort,
vRtrLdpNgSessLocalTcpPort,
vRtrLdpNgSessPeerTcpPort,
vRtrLdpNgSessLocalAddrType,
vRtrLdpNgSessLocalAddress,
vRtrLdpNgSessPeerAddrType,
vRtrLdpNgSessPeerAddress,
vRtrLdpNgSessKAHoldTimeRemaining,
vRtrLdpNgSessMaxPduLength,
vRtrLdpNgSessUpTime,
vRtrLdpNgSessLocalKATimeout,
vRtrLdpNgSessPeerKATimeout,
vRtrLdpNgSessAdvertise,
vRtrLdpNgSessLclGRHelperState,
vRtrLdpNgSessPeerGRState,
vRtrLdpNgSessPeerNumRestart,
vRtrLdpNgSessLastRestartTime,
vRtrLdpNgSessLocalFtReconTime,
vRtrLdpNgSessPeerFtReconTime,
vRtrLdpNgSessLocalFtRecovTime,
vRtrLdpNgSessPeerFtRecovTime,
vRtrLdpNgSessFtReconTimeRem,
vRtrLdpNgSessFtRecovTimeRem,
vRtrLdpNgSessBfdStatus,
vRtrLdpNgSessLocalP2MPCap,
vRtrLdpNgSessPeerP2MPCap,
vRtrLdpNgSessLocalMPMBBCap,
vRtrLdpNgSessPeerMPMBBCap,
vRtrLdpNgSessLocalDynCap,
vRtrLdpNgSessPeerDynCap,
vRtrLdpNgSessLocalOLoadCap,
vRtrLdpNgSessPeerOLoadCap,
vRtrLdpNgSessIPv4PfxFecOLoadSent,
vRtrLdpNgSessIPv6PfxFecOLoadSent,
vRtrLdpNgSessIPv4PfxFecOLoadRecv,
vRtrLdpNgSessIPv6PfxFecOLoadRecv,
vRtrLdpNgSessIPv4P2MPFecOLSent,
vRtrLdpNgSessIPv6P2MPFecOLSent,
vRtrLdpNgSessIPv4P2MPFecOLRecv,
vRtrLdpNgSessIPv6P2MPFecOLRecv,
vRtrLdpNgSessSvcFec128OLoadSent,
vRtrLdpNgSessSvcFec128OLoadRecv,
vRtrLdpNgSessSvcFec129OLoadSent,
vRtrLdpNgSessSvcFec129OLoadRecv,
vRtrLdpNgSessLocalIPv4PfxFecCap,
vRtrLdpNgSessPeerIPv4PfxFecCap,
vRtrLdpNgSessLocalIPv6PfxFecCap,
vRtrLdpNgSessPeerIPv6PfxFecCap,
vRtrLdpNgSessLocalSvcFec128Cap,
vRtrLdpNgSessPeerSvcFec128Cap,
vRtrLdpNgSessLocalSvcFec129Cap,
vRtrLdpNgSessPeerSvcFec129Cap
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP Sessions on
Nokia SROS series systems 12.0 Release."
::= { tmnxLdpNgGroups 3 }
tmnxLdpNgSessionStatsV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgSessStatsTargAdj,
vRtrLdpNgSessStatsLinkAdj,
vRtrLdpNgSessStatsHelloIn,
vRtrLdpNgSessStatsHelloOut,
vRtrLdpNgSessStatsKeepaliveIn,
vRtrLdpNgSessStatsKeepaliveOut,
vRtrLdpNgSessStatsInitIn,
vRtrLdpNgSessStatsInitOut,
vRtrLdpNgSessStatsLblMappingIn,
vRtrLdpNgSessStatsLblMappingOut,
vRtrLdpNgSessStatsLblRequestIn,
vRtrLdpNgSessStatsLblRequestOut,
vRtrLdpNgSessStatsLblReleaseIn,
vRtrLdpNgSessStatsLblReleaseOut,
vRtrLdpNgSessStatsLblWithdrawIn,
vRtrLdpNgSessStatsLblWithdrawOut,
vRtrLdpNgSessStatsLblAbortIn,
vRtrLdpNgSessStatsLblAbortOut,
vRtrLdpNgSessStatsAddrIn,
vRtrLdpNgSessStatsAddrOut,
vRtrLdpNgSessStatsAddrWithdrIn,
vRtrLdpNgSessStatsAddrWithdrOut,
vRtrLdpNgSessStatsNotifIn,
vRtrLdpNgSessStatsNotifOut,
vRtrLdpNgSessStatsIPv4PfxFecRcv,
vRtrLdpNgSessStatsIPv6PfxFecRcv,
vRtrLdpNgSessStatsIPv4PfxFecSnt,
vRtrLdpNgSessStatsIPv6PfxFecSnt,
vRtrLdpNgSessStatsIPv4P2MPFecRcv,
vRtrLdpNgSessStatsIPv6P2MPFecRcv,
vRtrLdpNgSessStatsIPv4P2MPFecSnt,
vRtrLdpNgSessStatsIPv6P2MPFecSnt,
vRtrLdpNgSessStatsSvcFec128Recv,
vRtrLdpNgSessStatsSvcFec128Sent,
vRtrLdpNgSessStatsSvcFec129Recv,
vRtrLdpNgSessStatsSvcFec129Sent,
vRtrLdpNgSessStatsIPv4AddrRecv,
vRtrLdpNgSessStatsIPv6AddrRecv,
vRtrLdpNgSessStatsIPv4AddrSent,
vRtrLdpNgSessStatsIPv6AddrSent,
vRtrLdpNgSessStatsCapabilityIn,
vRtrLdpNgSessStatsCapabilityOut
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP Session
statistics on Nokia SROS series systems 12.0 Release."
::= { tmnxLdpNgGroups 4 }
tmnxLdpNgPeerParamsV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgTargPeerLspRowStatus,
vRtrLdpNgSessParamRowStatus,
vRtrLdpNgSessParamDODLblDistrib,
vRtrLdpNgSessParamImportPolicy1,
vRtrLdpNgSessParamImportPolicy2,
vRtrLdpNgSessParamImportPolicy3,
vRtrLdpNgSessParamImportPolicy4,
vRtrLdpNgSessParamImportPolicy5,
vRtrLdpNgSessParamExportPolicy1,
vRtrLdpNgSessParamExportPolicy2,
vRtrLdpNgSessParamExportPolicy3,
vRtrLdpNgSessParamExportPolicy4,
vRtrLdpNgSessParamExportPolicy5,
vRtrLdpNgSessFec129CiscoInterop,
vRtrLdpNgSessParamAdvAdjAddrOnly,
vRtrLdpNgSessAddrLclLdpIdType,
vRtrLdpNgSessionAddrLocalLdpId,
vRtrLdpNgSessionAddrNumInAddrs,
vRtrLdpNgSessionAddrNumOutAddrs,
vRtrLdpNgSessInAddrLclLdpIdType,
vRtrLdpNgSessionInAddrLocalLdpId,
vRtrLdpNgSessOutAddrLclLdpIdType,
vRtrLdpNgSessionOutAddrLclLdpId,
vRtrLdpNgTargPeerTunlLspTblLstCh,
vRtrLdpNgSessionParamsTableLstCh,
vRtrLdpNgSessPeIDMacFlushInterop,
vRtrLdpNgSessParamIPv4PfxFecCap,
vRtrLdpNgSessParamIPv6PfxFecCap,
vRtrLdpNgSessParamP2MPFecCap
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP interfaces
and targeted peers on Nokia SROS series systems 12.0 release."
::= { tmnxLdpNgGroups 5 }
tmnxLdpNgAddrFecV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgAddrFecFlags,
vRtrLdpNgAddrFecNumInLabels,
vRtrLdpNgAddrFecNumOutLabels,
vRtrLdpNgAddrFecInLbl,
vRtrLdpNgAddrFecInLblStatus,
vRtrLdpNgAddrFecInLblIfIndex,
vRtrLdpNgAddrFecOutLbl,
vRtrLdpNgAddrFecOutLblStatus,
vRtrLdpNgAddrFecOutLblIfIndex,
vRtrLdpNgAddrFecOutLblNHType,
vRtrLdpNgAddrFecOutLblNHAddr,
vRtrLdpNgAddrFecOutLblMetric,
vRtrLdpNgAddrFecOutLblMtu,
vRtrLdpNgAddrFecOutLblLspId,
vRtrLdpNgAddrFecMapFlags,
vRtrLdpNgAddrFecMapNumInLabels,
vRtrLdpNgAddrFecMapNumOutLabels
}
STATUS current
DESCRIPTION
"The group of objects supporting Address FECs on Nokia SROS series
systems 12.0 Release."
::= { tmnxLdpNgGroups 6 }
tmnxLdpNgP2MPFecV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgExtP2MPFecFlags,
vRtrLdpNgExtP2MPFecNumInLabels,
vRtrLdpNgExtP2MPFecNumOutLabels,
vRtrLdpNgExtP2MPFecTunnelIfId,
vRtrLdpNgExtP2MPFecMetric,
vRtrLdpNgExtP2MPFecMTU,
vRtrLdpNgExtP2MPFecInLbl,
vRtrLdpNgExtP2MPFecInLblStatus,
vRtrLdpNgExtP2MPFecOutLbl,
vRtrLdpNgExtP2MPFecOutLblStatus,
vRtrLdpNgExtP2MPFecOutLblNHType,
vRtrLdpNgExtP2MPFecOutLblNHAdr,
vRtrLdpNgExtP2MPFecOutLblIfIndex,
vRtrLdpNgExtP2MPFecOutLblLspId,
vRtrLdpNgExtP2MPFecMapFlags,
vRtrLdpNgExtP2MPFecMapNumInLbls,
vRtrLdpNgExtP2MPFecMapNumOutLbls,
vRtrLdpNgExtP2MPFecMapTunnelIfId,
vRtrLdpNgExtP2MPFecMapMetric,
vRtrLdpNgExtP2MPFecMapMTU
}
STATUS current
DESCRIPTION
"The group of objects supporting P2MP FECs on Nokia SROS series systems
12.0 Release."
::= { tmnxLdpNgGroups 7 }
tmnxLdpNgServFecV12v0Group OBJECT-GROUP
OBJECTS {
vLdpNgFec128ServType,
vLdpNgFec128ServId,
vLdpNgFec128VpnId,
vLdpNgFec128Flags,
vLdpNgFec128NumInLabels,
vLdpNgFec128NumOutLabels,
vLdpNgFec128SdpId,
vLdpNgFec128MateEndptVcId,
vLdpNgFec128MateEndptSdpId,
vLdpNgFec128InLabel,
vLdpNgFec128InLabelStatus,
vLdpNgFec128InLabelSigStatus,
vLdpNgFec128InLblWdwReason,
vLdpNgFec128InLblMaxCellConcat,
vLdpNgFec128InLblFLTxCap,
vLdpNgFec128InLblFLRxCap,
vLdpNgFec128InLblIPv4CeIpAdType,
vLdpNgFec128InLblIPv4CeIpAddr,
vLdpNgFec128InLblIPv4Cap,
vLdpNgFec128InLblIPv6Cap,
vLdpNgFec128InLblMTU,
vLdpNgFec128InLblVlanTag,
vLdpNgFec128InLblVccvCV,
vLdpNgFec128InLblVccvCC,
vLdpNgFec128InLblPwStatus,
vLdpNgFec128OutLabel,
vLdpNgFec128OutLabelStatus,
vLdpNgFec128OutLabelSigStatus,
vLdpNgFec128OutLblMaxCellConcat,
vLdpNgFec128OutLblFLTxCap,
vLdpNgFec128OutLblFLRxCap,
vLdpNgFec128OutLblIPv4CeAddrType,
vLdpNgFec128OutLblIPv4CeIpAddr,
vLdpNgFec128OutLblIPv4Cap,
vLdpNgFec128OutLblIPv6Cap,
vLdpNgFec128OutLblMTU,
vLdpNgFec128OutLblVlanTag,
vLdpNgFec128OutLblVccvCV,
vLdpNgFec128OutLblVccvCC,
vLdpNgFec128OutLblPwStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP service
FECs sent to or received from an LDP peer on Nokia SROS series systems
release 12.0."
::= { tmnxLdpNgGroups 8 }
tmnxLdpNgFec129V12v0Group OBJECT-GROUP
OBJECTS {
vLdpNgFec129ServType,
vLdpNgFec129ServId,
vLdpNgFec129VpnId,
vLdpNgFec129Flags,
vLdpNgFec129NumInLabels,
vLdpNgFec129NumOutLabels,
vLdpNgFec129SdpId,
vLdpNgFec129MateAgiType,
vLdpNgFec129MateAgiLen,
vLdpNgFec129MateAgiVal,
vLdpNgFec129MateSrcAiiType,
vLdpNgFec129MateSrcAiiLen,
vLdpNgFec129MateSrcAiiVal,
vLdpNgFec129MateTgtAiiType,
vLdpNgFec129MateTgtAiiLen,
vLdpNgFec129MateTgtAiiVal,
vLdpNgFec129MateSdpId,
vLdpNgFec129InLabel,
vLdpNgFec129InLabelStatus,
vLdpNgFec129InLblMTU,
vLdpNgFec129InLblVlanTag,
vLdpNgFec129InLblMaxCellConcat,
vLdpNgFec129InLblSigStatus,
vLdpNgFec129InLblIPv4Cap,
vLdpNgFec129InLblIPv6Cap,
vLdpNgFec129InLblIPv4CeAddrType,
vLdpNgFec129InLblIPv4CeIpAddr,
vLdpNgFec129InLblWdwReason,
vLdpNgFec129InLblFLTxCap,
vLdpNgFec129InLblFLRxCap,
vLdpNgFec129InLblVccvCV,
vLdpNgFec129InLblVccvCC,
vLdpNgFec129InLblPwStatus,
vLdpNgFec129OutLabel,
vLdpNgFec129OutLabelStatus,
vLdpNgFec129OutLblMTU,
vLdpNgFec129OutLblVlanTag,
vLdpNgFec129OutLblMaxCellConcat,
vLdpNgFec129OutLblSigStatus,
vLdpNgFec129OutLblIPv4Cap,
vLdpNgFec129OutLblIPv6Cap,
vLdpNgFec129OutLblIPv4CeAddrType,
vLdpNgFec129OutLblIPv4CeIpAddr,
vLdpNgFec129OutLblFLTxCap,
vLdpNgFec129OutLblFLRxCap,
vLdpNgFec129OutLblVccvCV,
vLdpNgFec129OutLblVccvCC,
vLdpNgFec129OutLblPwStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting management of LDP FEC-129s sent to or
received from an LDP peer on Nokia SROS series systems release 12.0."
::= { tmnxLdpNgGroups 9 }
tmnxLdpNgCepTdmFecV12v0Group OBJECT-GROUP
OBJECTS {
vLdpNgCepTdmFec128InLblPayldSize,
vLdpNgCepTdmFec128InLblBitrate,
vLdpNgCepTdmFec128InLblRtpHeader,
vLdpNgCepTdmFec128InLblDiffTStmp,
vLdpNgCepTdmFec128InLblSigPkts,
vLdpNgCepTdmFec128InLblCasTrunk,
vLdpNgCepTdmFec128InLblTStmpFreq,
vLdpNgCepTdmFec128InLblPayldType,
vLdpNgCepTdmFec128InLblSsrcId,
vLdpNgCepTdmFec128OutLblPyldSze,
vLdpNgCepTdmFec128OutLblBitrate,
vLdpNgCepTdmFec128OutLblRtpHdr,
vLdpNgCepTdmFec128OutLblDfTstmp,
vLdpNgCepTdmFec128OutLblSigPkts,
vLdpNgCepTdmFec128OutLblCasTrnk,
vLdpNgCepTdmFec128OutLblTstmpFq,
vLdpNgCepTdmFec128OutLblPyldTyp,
vLdpNgCepTdmFec128OutLblSsrcId,
vLdpNgCepTdmFec129InLblPayldSize,
vLdpNgCepTdmFec129InLblBitrate,
vLdpNgCepTdmFec129InLblRtpHeader,
vLdpNgCepTdmFec129InLblDiffTStmp,
vLdpNgCepTdmFec129InLblSigPkts,
vLdpNgCepTdmFec129InLblCasTrunk,
vLdpNgCepTdmFec129InLblTStmpFreq,
vLdpNgCepTdmFec129InLblPayldType,
vLdpNgCepTdmFec129InLblSsrcId,
vLdpNgCepTdmFec129OutLblPyldSize,
vLdpNgCepTdmFec129OutLblBitrate,
vLdpNgCepTdmFec129OutLblRtpHdr,
vLdpNgCepTdmFec129OutLblDifTStmp,
vLdpNgCepTdmFec129OutLblSigPkts,
vLdpNgCepTdmFec129OutLblCasTrnk,
vLdpNgCepTdmFec129OutLblTStmpFrq,
vLdpNgCepTdmFec129OutLblPyldType,
vLdpNgCepTdmFec129OutLblSsrcId
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP CEP/TDM
FECs sent to or received from an LDP peer on Nokia SROS series systems
release 12.0."
::= { tmnxLdpNgGroups 10 }
tmnxLdpNgStaticFecV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgStaticFecTableLstCh,
vRtrLdpNgStaticFecRowStatus,
vRtrLdpNgStaticFecNumInLabel,
vRtrLdpNgStaticFecNumOutLabel,
vRtrLdpNgSFecInLabelRowStatus,
vRtrLdpNgSFecOperInLabel,
vRtrLdpNgSFecOutLabelRowStatus,
vRtrLdpNgSFecOutLabel
}
STATUS current
DESCRIPTION
"The group of objects supporting management of LDP Static FECs on Nokia
SROS series systems 12.0 release."
::= { tmnxLdpNgGroups 11 }
tmnxLdpNgTargPeerV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgTargPeerTableLstCh,
vRtrLdpNgTargPeerRowStatus,
vRtrLdpNgTargPeerLastChange,
vRtrLdpNgTargPeerAdminState,
vRtrLdpNgTargPeerOperState,
vRtrLdpNgTargPeerUpTime,
vRtrLdpNgTargPeerOperDownReason,
vRtrLdpNgTargPeerInheritance,
vRtrLdpNgTargPeerKAFactor,
vRtrLdpNgTargPeerKATimeout,
vRtrLdpNgTargPeerHelloFactor,
vRtrLdpNgTargPeerHelloTimeout,
vRtrLdpNgTargPeerOprHelloTimeout,
vRtrLdpNgTargPeerHelloReduction,
vRtrLdpNgTargPeerHelloRdctnFctr,
vRtrLdpNgTargPeerBackoffTime,
vRtrLdpNgTargPeerMaxBackoffTime,
vRtrLdpNgTargPeerTunneling,
vRtrLdpNgTargPeerBfdEnabled,
vRtrLdpNgTargPeerLsrIfIndex,
vRtrLdpNgTargPeerAutoCreate,
vRtrLdpNgTargPeerCreator,
vRtrLdpNgTargPeerTemplName,
vRtrLdpNgTargPeerStatExistingAdj
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP targeted
peer on Nokia SROS series systems release 12.0."
::= { tmnxLdpNgGroups 14 }
tmnxLdpNgInetIfV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgInetIfTableLstCh,
vRtrLdpNgInetIfRowStatus,
vRtrLdpNgInetIfUpTime,
vRtrLdpNgInetIfLastChange,
vRtrLdpNgInetIfAdminState,
vRtrLdpNgInetIfOperState,
vRtrLdpNgInetIfOperDownReason,
vRtrLdpNgInetIfInheritance,
vRtrLdpNgInetIfKAFactor,
vRtrLdpNgInetIfKATimeout,
vRtrLdpNgInetIfHelloFactor,
vRtrLdpNgInetIfHelloTimeout,
vRtrLdpNgInetIfOperHelloTimeout,
vRtrLdpNgInetIfBackoffTime,
vRtrLdpNgInetIfMaxBackoffTime,
vRtrLdpNgInetIfTransAddrType,
vRtrLdpNgInetIfLsrIfType,
vRtrLdpNgInetIfLsrIfIndex,
vRtrLdpNgInetIfIPv4P2MPFecCap,
vRtrLdpNgInetIfIPv6P2MPFecCap,
vRtrLdpNgInetIfIPv4PfxFecCap,
vRtrLdpNgInetIfIPv6PfxFecCap
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP Inet family
interfaces on Nokia SROS series systems release 12.0."
::= { tmnxLdpNgGroups 15 }
tmnxLdpNgStatsV12v0Group OBJECT-GROUP
OBJECTS {
vLdpNgStatsIPv4OperDownEvents,
vLdpNgStatsIPv6OperDownEvents,
vLdpNgStatsIPv4ActiveSess,
vLdpNgStatsIPv6ActiveSess,
vLdpNgStatsIPv4ActiveLinkAdj,
vLdpNgStatsIPv6ActiveLinkAdj,
vLdpNgStatsIPv4ActiveTargAdj,
vLdpNgStatsIPv6ActiveTargAdj,
vLdpNgStatsIPv4ActiveIf,
vLdpNgStatsIPv6ActiveIf,
vLdpNgStatsIPv4InactiveIf,
vLdpNgStatsIPv6InactiveIf,
vLdpNgStatsIPv4ActiveTargPeers,
vLdpNgStatsIPv6ActiveTargPeers,
vLdpNgStatsIPv4InactiveTargPeers,
vLdpNgStatsIPv6InactiveTargPeers,
vLdpNgStatsIPv4PfxFecRecv,
vLdpNgStatsIPv6PfxFecRecv,
vLdpNgStatsIPv4PfxFecSent,
vLdpNgStatsIPv6PfxFecSent,
vLdpNgStatsFec128FecSent,
vLdpNgStatsFec128FecRecv,
vLdpNgStatsFec129FecSent,
vLdpNgStatsFec129FecRecv,
vLdpNgStatsIPv4AttemptedSessions,
vLdpNgStatsIPv6AttemptedSessions,
vLdpNgStatsSessRejNoHelloErrs,
vLdpNgStatsSessRejAdvErrors,
vLdpNgStatsSessRejMaxPduErrs,
vLdpNgStatsSessRejLblRngeErrs,
vLdpNgStatsBadLdpIdErrors,
vLdpNgStatsBadPduLengthErrors,
vLdpNgStatsBadMsgLengthErrors,
vLdpNgStatsBadTlvLengthErrors,
vLdpNgStatsMalformedTlvErrors,
vLdpNgStatsKeepAliveExpErrors,
vLdpNgStatsShutdownNotifRecv,
vLdpNgStatsShutdownNotifSent,
vLdpNgStatsIPv4EgrFecPfxCount,
vLdpNgStatsIPv6EgrFecPfxCount,
vLdpNgStatsUnknownTlvErrors,
vLdpNgStatsIPv4P2MPFecSent,
vLdpNgStatsIPv6P2MPFecSent,
vLdpNgStatsIPv4P2MPFecRecv,
vLdpNgStatsIPv6P2MPFecRecv,
vLdpNgStatsIPv4PfxFecOLSessSent,
vLdpNgStatsIPv6PfxFecOLSessSent,
vLdpNgStatsIPv4PfxFecOLSessRecv,
vLdpNgStatsIPv6PfxFecOLSessRecv,
vLdpNgStatsIPv4P2MPFecOLSessSent,
vLdpNgStatsIPv6P2MPFecOLSessSent,
vLdpNgStatsIPv4P2MPFecOLSessRecv,
vLdpNgStatsIPv6P2MPFecOLSessRecv,
vLdpNgStatsFec128FecOLSessSent,
vLdpNgStatsFec128FecOLSessRecv,
vLdpNgStatsFec129FecOLSessSent,
vLdpNgStatsFec129FecOLSessRecv,
vLdpNgStatsIPv4OLoadInterfaces,
vLdpNgStatsIPv6OLoadInterfaces,
vLdpNgStatsIPv4OLoadTargPeers,
vLdpNgStatsIPv6OLoadTargPeers,
vLdpNgStatsIPv4PfxFecInOLoad,
vLdpNgStatsIPv6PfxFecInOLoad,
vLdpNgStatsIPv4P2MPFecInOLoad,
vLdpNgStatsIPv6P2MPFecInOLoad,
vLdpNgStatsFec128FecInOLoad,
vLdpNgStatsFec129FecInOLoad,
vLdpNgStatsBadProtVersionErrors
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP statistics
on Nokia SROS series systems release 12.0."
::= { tmnxLdpNgGroups 16 }
tmnxLdpNgCapabilityV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenP2MPCapability,
vRtrLdpNgGenMPMBBCapability,
vRtrLdpNgGenDynamicCapability,
vRtrLdpNgGenOverloadCapability,
vRtrLdpNgGenFec128Capability,
vRtrLdpNgGenFec129Capability,
vRtrLdpNgGenIPv4PfxFecCapability,
vRtrLdpNgGenIPv6PfxFecCapability
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP
capabilities on Nokia SROS series systems release 12.0."
::= { tmnxLdpNgGroups 17 }
tmnxLdpNgTcpSessParamsV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgTcpSessParamsTableLstCh,
vRtrLdpNgTcpSessRowStatus,
vRtrLdpNgTcpSessAuth,
vRtrLdpNgTcpSessAuthKey,
vRtrLdpNgTcpSessAuthKeyChain,
vRtrLdpNgTcpSessPMTUDiscovery
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP TCP session
parameters on Nokia SROS series systems release 12.0."
::= { tmnxLdpNgGroups 18 }
tmnxLdpNgGeneralV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgGeneralTableLstCh,
vRtrLdpNgGenCreateTime,
vRtrLdpNgGenIPv4UpTime,
vRtrLdpNgGenIPv6UpTime,
vRtrLdpNgGenLastChange,
vRtrLdpNgGenAdminState,
vRtrLdpNgGenIPv4OperState,
vRtrLdpNgGenIPv6OperState,
vRtrLdpNgGenIPv4OperDownReason,
vRtrLdpNgGenIPv6OperDownReason,
vRtrLdpNgGenLdpIPv4LsrId,
vRtrLdpNgGenLdpIPv6LsrId,
vRtrLdpNgGenProtocolVersion,
vRtrLdpNgGenBackoffTime,
vRtrLdpNgGenMaxBackoffTime,
vRtrLdpNgGenTunnelDownDampTime,
vRtrLdpNgGenGracefulRestart,
vRtrLdpNgGenGRNbrLiveTime,
vRtrLdpNgGenGRMaxRecoveryTime,
vRtrLdpNgGenLabelWithdrawalDelay,
vRtrLdpNgGenImplicitNull,
vRtrLdpNgGenShortTTLPropLocal,
vRtrLdpNgGenShortTTLPropTransit,
vRtrLdpNgGenMPMBBTime,
vRtrLdpNgGenLdpFrr,
vRtrLdpNgGenMcastUpstreamFrr,
vRtrLdpNgGenDeaggregateFec,
vRtrLdpNgGenControlMode,
vRtrLdpNgGenDistMethod,
vRtrLdpNgGenRetentionMode,
vRtrLdpNgGenPropagatePolicy,
vRtrLdpNgGenLoopDetectCap,
vRtrLdpNgGenHopLimit,
vRtrLdpNgGenPathVectorLimit,
vRtrLdpNgGenRoutePreference
}
STATUS current
DESCRIPTION
"The group of objects supporting general management of extended LDP on
Nokia SROS series systems 12.0 release."
::= { tmnxLdpNgGroups 19 }
tmnxLdpNgPolicyV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgPolicyTableLstCh,
vRtrLdpNgPolRowLastCh,
vRtrLdpNgPolImportPolicy1,
vRtrLdpNgPolImportPolicy2,
vRtrLdpNgPolImportPolicy3,
vRtrLdpNgPolImportPolicy4,
vRtrLdpNgPolImportPolicy5,
vRtrLdpNgPolExportPolicy1,
vRtrLdpNgPolExportPolicy2,
vRtrLdpNgPolExportPolicy3,
vRtrLdpNgPolExportPolicy4,
vRtrLdpNgPolExportPolicy5,
vRtrLdpNgPolTunlTblExportPolicy1,
vRtrLdpNgPolTunlTblExportPolicy2,
vRtrLdpNgPolTunlTblExportPolicy3,
vRtrLdpNgPolTunlTblExportPolicy4,
vRtrLdpNgPolTunlTblExportPolicy5
}
STATUS current
DESCRIPTION
"The group of objects supporting policies of extended LDP protocol on
Nokia SROS series systems 12.0 release."
::= { tmnxLdpNgGroups 20 }
tmnxLdpNgIfParamsV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgIfParamsTableLstCh,
vRtrLdpNgIfParamRowLastCh,
vRtrLdpNgIfParamIPv4KAFactor,
vRtrLdpNgIfParamIPv6KAFactor,
vRtrLdpNgIfParamIPv4KATimeout,
vRtrLdpNgIfParamIPv6KATimeout,
vRtrLdpNgIfParamIPv4HelloFactor,
vRtrLdpNgIfParamIPv6HelloFactor,
vRtrLdpNgIfParamIPv4HelloTimeout,
vRtrLdpNgIfParamIPv6HelloTimeout,
vRtrLdpNgIfParamIPv4TransAddrTyp,
vRtrLdpNgIfParamIPv6TransAddrTyp
}
STATUS current
DESCRIPTION
"The group of objects supporting interface parameters of extended LDP
on Nokia SROS series systems 12.0 release."
::= { tmnxLdpNgGroups 21 }
tmnxLdpNgTargetedPeerV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgTargTableLstCh,
vRtrLdpNgTargRowLastCh,
vRtrLdpNgTargImportPolicy1,
vRtrLdpNgTargImportPolicy2,
vRtrLdpNgTargImportPolicy3,
vRtrLdpNgTargImportPolicy4,
vRtrLdpNgTargImportPolicy5,
vRtrLdpNgTargExportPolicy1,
vRtrLdpNgTargExportPolicy2,
vRtrLdpNgTargExportPolicy3,
vRtrLdpNgTargExportPolicy4,
vRtrLdpNgTargExportPolicy5,
vRtrLdpNgTargTunnelPreference,
vRtrLdpNgTargetedSessions,
vRtrLdpNgTargIPv4KAFactor,
vRtrLdpNgTargIPv6KAFactor,
vRtrLdpNgTargIPv4KATimeout,
vRtrLdpNgTargIPv6KATimeout,
vRtrLdpNgTargIPv4HelloFactor,
vRtrLdpNgTargIPv6HelloFactor,
vRtrLdpNgTargIPv4HelloTimeout,
vRtrLdpNgTargIPv6HelloTimeout,
vRtrLdpNgTargIPv4HelloReduction,
vRtrLdpNgTargIPv6HelloReduction,
vRtrLdpNgTargIPv4HelloReduceFctr,
vRtrLdpNgTargIPv6HelloReduceFctr
}
STATUS current
DESCRIPTION
"The group of objects supporting Targeted Peers of extended LDP on
Nokia SROS series systems 12.0 release."
::= { tmnxLdpNgGroups 22 }
tmnxLdpNgAggrPreMatchV12v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgAggrPreMatchTableLstCh,
vRtrLdpNgAggrPreMatchRowLastCh,
vRtrLdpNgAggrPreMatchEnabled,
vRtrLdpNgAggrPreMatchExcPolicy1,
vRtrLdpNgAggrPreMatchExcPolicy2,
vRtrLdpNgAggrPreMatchExcPolicy3,
vRtrLdpNgAggrPreMatchExcPolicy4,
vRtrLdpNgAggrPreMatchExcPolicy5,
vRtrLdpNgAggrPreMatchAdminState
}
STATUS current
DESCRIPTION
"The group of objects supporting Aggregate Prefix Match policies of
extended LDP on Nokia SROS series systems 12.0 release."
::= { tmnxLdpNgGroups 23 }
tmnxLdpNgFecLimPerPeerV13v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgSessParamMaxFec,
vRtrLdpNgSessParamMaxFecLogOnly,
vRtrLdpNgSessParamMaxFecThold,
vRtrLdpNgSessOperMaxFecThreshold
}
STATUS current
DESCRIPTION
"The group of notifications supporting LSR FEC limit per LDP peer
feature on Nokia SROS series systems."
::= { tmnxLdpNgGroups 24 }
tmnxLdpNgNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrLdpNgSessMaxFecThresChanged,
vRtrLdpNgSessMaxFecLimitReached,
vRtrLdpNgIfStateChange,
vRtrLdpNgInetIfStateChange,
vRtrLdpNgIpv4InstStateChange,
vRtrLdpNgIpv6InstStateChange,
vRtrLdpNgSessionStateChange,
vRtrLdpNgTargPeerStateChange,
vRtrLdpNgResourceExhaustion,
vRtrLdpNgAddrFecCommMismatch
}
STATUS current
DESCRIPTION
"The group of notifications supporting LSR FEC limit per LDP peer
feature on Nokia SROS series systems."
::= { tmnxLdpNgGroups 25 }
tmnxLdpNgSessParamPeerV13v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgSessParamAddrExpPolicy1,
vRtrLdpNgSessParamAddrExpPolicy2,
vRtrLdpNgSessParamAddrExpPolicy3,
vRtrLdpNgSessParamAddrExpPolicy4,
vRtrLdpNgSessParamAddrExpPolicy5
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP interfaces
and targeted peers on Nokia SROS series systems 13.0 release."
::= { tmnxLdpNgGroups 26 }
tmnxLdpNgTcpSessParamsV13v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgTcpSessMinTTLValue
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP TCP session
parameters on Nokia SROS series systems release 13.0."
::= { tmnxLdpNgGroups 27 }
tmnxLdpNgNotifyObjs OBJECT-GROUP
OBJECTS {
vRtrLdpNgSessOperThresLevel,
vRtrLdpNgInstNotifyReasonCode,
vRtrLdpNgSessOverloadState,
vRtrLdpNgSessOverloadDirection,
vRtrLdpNgSessOverloadFecType,
vRtrLdpNgSessOvldFecTypeSubTyp
}
STATUS current
DESCRIPTION
"The group of objects supporting LDP fec-limit notification on Nokia
SROS series systems."
::= { tmnxLdpNgGroups 28 }
tmnxLdpNgHelloAdjV13v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgHelloAdjLclIPv4P2MPCap,
vRtrLdpNgHelloAdjRemIPv4P2MPCap,
vRtrLdpNgHelloAdjLclIPv6P2MPCap,
vRtrLdpNgHelloAdjRemIPv6P2MPCap,
vRtrLdpNgHelloAdjLclIPv4PfxCap,
vRtrLdpNgHelloAdjRemIPv4PfxCap,
vRtrLdpNgHelloAdjLclIPv6PfxCap,
vRtrLdpNgHelloAdjRemIPv6PfxCap
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP Hello
Adjacencies on Nokia SROS series systems release 13.0."
::= { tmnxLdpNgGroups 29 }
tmnxLdpNgTargPeerV13v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgTargPeerLocalIpAddrType,
vRtrLdpNgTargPeerLocalIpAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP targeted
peer on Nokia SROS series systems release 13.0."
::= { tmnxLdpNgGroups 30 }
tmnxLdpNgInetIfV13v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgInetIfLocalIpAddrType,
vRtrLdpNgInetIfLocalIpAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP Inet family
interfaces on Nokia SROS series systems release 13.0."
::= { tmnxLdpNgGroups 31 }
tmnxLdpNgAddrActiveFecV13v0Group OBJECT-GROUP
OBJECTS {
vLdpNgAddrActiveFecFecFlags,
vLdpNgAddrActiveFecNumInLbls,
vLdpNgAddrActiveFecNumOutLbls,
vLdpNgAddrActiveFecInLbl,
vLdpNgAddrActiveFecInLblIfIndex,
vLdpNgAddrActiveFecOutLbl,
vLdpNgAddrActiveFecOutLblStatus,
vLdpNgAddrActiveFecOutLblIfIdx,
vLdpNgAddrActiveFecOutLblNHType,
vLdpNgAddrActiveFecOutLblNHAddr,
vLdpNgAddrActiveFecOutLblMetric,
vLdpNgAddrActiveFecOutLblMtu,
vLdpNgAddrActiveFecOutLblLspId
}
STATUS current
DESCRIPTION
"The group of objects supporting Active Address FECs on Nokia SROS
series systems 13.0."
::= { tmnxLdpNgGroups 32 }
tmnxLdpNgGeneralV13v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenClassForwarding,
vLdpNgAddrActiveFecOutLblCBF
}
STATUS current
DESCRIPTION
"The group of objects supporting general management of extended LDP on
Nokia SROS series systems 13.0 release."
::= { tmnxLdpNgGroups 33 }
tmnxLdpNgRecvFecCapV13v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgSessPeerCapRecv,
vRtrLdpNgHelloAdjPeerCapRecv
}
STATUS current
DESCRIPTION
"The group of objects supporting Active Address FECs on Nokia SROS
series systems 13.0."
::= { tmnxLdpNgGroups 34 }
tmnxLdpNgGeneralEliV14v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenEntropyLblCapability
}
STATUS current
DESCRIPTION
"The group of objects supporting general management of extended LDP on
Nokia SROS series systems 14.0 release."
::= { tmnxLdpNgGroups 35 }
tmnxLdpNgTargPeerV14v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgTargPeerStatsHelloRecv,
vRtrLdpNgTargPeerStatsHelloSent,
vRtrLdpNgTargPeerStatsBadPduLen,
vRtrLdpNgTargPeerStatsBadMsgLen,
vRtrLdpNgTargPeerStatsMalformTlv,
vRtrLdpNgTargPeerStatsBadProtVer
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP targeted
peer on Nokia SROS series systems release 14.0."
::= { tmnxLdpNgGroups 36 }
tmnxLdpNgIfV14v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgInetIfStatsHelloRecv,
vRtrLdpNgInetIfStatsHelloSent,
vRtrLdpNgInetIfStatsBadPduLen,
vRtrLdpNgInetIfStatsBadMsgLen,
vRtrLdpNgInetIfStatsMalformedTlv,
vRtrLdpNgInetIfStatsBadProtoVer
}
STATUS current
DESCRIPTION
"The group of objects supporting general management of extended LDP
interfaces on Nokia SROS series systems 14.0 release."
::= { tmnxLdpNgGroups 37 }
tmnxLdpNgGeneralFrrV14v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenFrrSRStitch
}
STATUS current
DESCRIPTION
"The group of objects supporting general management of extended LDP
fast reroute on Nokia SROS series systems 14.0 release."
::= { tmnxLdpNgGroups 38 }
tmnxLdpNgSessV14v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgSessLocalUnregNotiCap,
vRtrLdpNgSessPeerUnregNotiCap,
vRtrLdpNgSessEndOfLibSent,
vRtrLdpNgSessEndOfLibRecv,
vRtrLdpNgGenUnregNotiCapability
}
STATUS current
DESCRIPTION
"The group of objects supporting general management of End of Label
Information Base Notifications on Nokia SROS series systems 14.0
release."
::= { tmnxLdpNgGroups 40 }
tmnxLdpNgLegacyInteropGrp OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenIpv4LsrInterop
}
STATUS current
DESCRIPTION
"The group of objects supporting general management of interoperability
with legacy IPv4 LSR implementations on Nokia SROS series systems 14.0
release."
::= { tmnxLdpNgGroups 41 }
tmnxLdpNgIpV632BitLsridGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgTargPeer32BitLsrFormat,
vRtrLdpNgInetIf32BitLsrFormat
}
STATUS current
DESCRIPTION
"The group of objects supporting LDP IPv6 32-bit LSR-ID
interoperability with Cisco and implementations not supporting 128-bit
LSR-ID systems release 15.0."
::= { tmnxLdpNgGroups 43 }
tmnxLdpNgMcastUpstrmAsbrFrrGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenMcastUpstrmAsbrFrr,
vRtrLdpNgP2MPStitchRootAddrType,
vRtrLdpNgP2MPStitchRootAddress,
vRtrLdpNgP2MPFecStitchOpaqueTyp,
vRtrLdpNgP2MPFecStitchOpaqueLen,
vRtrLdpNgP2MPFecStitchOpaqueVal
}
STATUS current
DESCRIPTION
"The group of objects supporting management of multicast E2E P2mp
protection for MLDP feature on Nokia SROS series systems release 15.0."
::= { tmnxLdpNgGroups 45 }
tmnxLdpNgBfdOnLspGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgBfdOnLspPfxListEnable,
vRtrLdpNgBfdOnLspPfxListFailAct,
vRtrLdpNgBfdOnLspPfxListLastChgd,
vRtrLdpNgBfdOnLspPfxListPingIntv,
vRtrLdpNgBfdOnLspPfxListPriority,
vRtrLdpNgBfdOnLspPfxListRowStat,
vRtrLdpNgBfdOnLspPfxListSrcAddr,
vRtrLdpNgBfdOnLspPfxListSrcAddrT,
vRtrLdpNgBfdOnLspPfxListTabLastC,
vRtrLdpNgBfdOnLspPfxListTmplName,
vRtrLdpNgBfdOnLspPrefixOperState
}
STATUS current
DESCRIPTION
"The group of objects supporting BFD on LDP LSPs, added in SROS series
systems, release 15.0."
::= { tmnxLdpNgGroups 46 }
tmnxLdpNgNonRecFecGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenBasicFecOnly
}
STATUS current
DESCRIPTION
"The group of objects supporting non recursive FEC for option C feature
on Nokia SROS series systems release 15.0."
::= { tmnxLdpNgGroups 47 }
tmnxLdpNgSessParamAdvertGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgSessParamAdvert,
vRtrLdpNgSessLsrIdAdvert,
vRtrLdpNgTargPeerLsrIdAdvert
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP session
parameter on Nokia SROS series systems release 15.0."
::= { tmnxLdpNgGroups 48 }
tmnxLdpNgSessParamCommunityGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgSessParamCommunity,
vRtrLdpNgAddrFecCommunity,
vRtrLdpNgSessCommunity,
vRtrLdpNgTargPeerCommunity
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LDP session
parameter on Nokia SROS series systems release 15.0."
::= { tmnxLdpNgGroups 49 }
tmnxLdpNgResolveRootUsingGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgResolveRootUsing
}
STATUS current
DESCRIPTION
"The group of objects supporting resolution via multicast route table
feature on Nokia SROS series systems release 16.0."
::= { tmnxLdpNgGroups 50 }
tmnxLdpNgWeightedEcmpGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenWeightedEcmp
}
STATUS current
DESCRIPTION
"The group of objects supporting control of weighted-ECMP in LDP on
Nokia SROS series systems release 16.0."
::= { tmnxLdpNgGroups 51 }
tmnxLdpNgSysIpFecPolicyGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenConsiderSysIPInGep
}
STATUS current
DESCRIPTION
"The group of objects supporting control of system IP address FEC
generation by policy feature feature on Nokia SROS series systems
release 16.0."
::= { tmnxLdpNgGroups 52 }
tmnxLdpNgPolicyV16v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgPolTunlTblImportPolicy1,
vRtrLdpNgPolTunlTblImportPolicy2,
vRtrLdpNgPolTunlTblImportPolicy3,
vRtrLdpNgPolTunlTblImportPolicy4,
vRtrLdpNgPolTunlTblImportPolicy5
}
STATUS current
DESCRIPTION
"The group of objects supporting policies of extended LDP protocol on
Nokia SROS series systems 16.0 release."
::= { tmnxLdpNgGroups 53 }
tmnxLdpNgCBFV16v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgGenCBFMode
}
STATUS current
DESCRIPTION
"The group of objects supporting class-based-forwarding of extended LDP
protocol on Nokia SROS series systems 16.0 release."
::= { tmnxLdpNgGroups 54 }
tmnxLdpNgImportPmsiRoutesGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgImpPmsiMvpn,
vRtrLdpNgImpPmsiMvpnNoExpComm
}
STATUS current
DESCRIPTION
"The group of objects supporting import of BGP PMSI routes feature on
Nokia SROS series systems release 19.0."
::= { tmnxLdpNgGroups 56 }
tmnxLdpNgPolicyV19v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgPolImportMcastPolicy1,
vRtrLdpNgPolImportMcastPolicy2,
vRtrLdpNgPolImportMcastPolicy3,
vRtrLdpNgPolImportMcastPolicy4,
vRtrLdpNgPolImportMcastPolicy5
}
STATUS current
DESCRIPTION
"The group of objects supporting policies of extended LDP protocol on
Nokia SROS series systems release 19.0."
::= { tmnxLdpNgGroups 57 }
tmnxLdpNgIntfWeightedEcmpGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgIfLBWeight
}
STATUS current
DESCRIPTION
"The group of objects supporting non-IGP-shortcut weighted ECMP for LDP
prefix FECs on Nokia SROS series systems release 19.0."
::= { tmnxLdpNgGroups 58 }
tmnxLdpNgEcmpGroup OBJECT-GROUP
OBJECTS {
vRtrLdpNgMaxEcmpRoutes,
vRtrLdpNgOperEcmp
}
STATUS current
DESCRIPTION
"The group of objects supporting the LDP ECMP on Nokia SROS series
systems release 19.0."
::= { tmnxLdpNgGroups 59 }
tmnxLdpTargAutoTldpV20v0Group OBJECT-GROUP
OBJECTS {
vRtrLdpNgTargAutoTxV4AdminState,
vRtrLdpNgTargAutoTxV4Tunneling,
vRtrLdpNgTargAutoRxV4AdminState,
vRtrLdpNgTargAutoRxV4Tunneling
}
STATUS current
DESCRIPTION
"The group of objects supporting management of automatic T-LDP
(Targeted Label Distribution Protocol) on Nokia SROS series systems
20.0 release."
::= { tmnxLdpNgGroups 64 }
tmnxLdpNgNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 91 }
tmnxLdpNgNotifications OBJECT IDENTIFIER ::= { tmnxLdpNgNotifyPrefix 0 }
vRtrLdpNgIpv4InstStateChange NOTIFICATION-TYPE
OBJECTS {
vRtrLdpNgGenAdminState,
vRtrLdpNgGenIPv4OperState,
vRtrLdpNgInstNotifyReasonCode,
vRtrLdpNgGenIPv4OperDownReason
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrLdpNgIpv4InstStateChange is generated when the IPv4
LDP instance changes state operationally as specified by
vRtrLdpNgGenIPv4OperState.
[EFFECT] Based on the vRtrLdpNgGenIPv4OperDownReason reason code, the
system may not be able to accept new requests from peers.
[RECOVERY] Based on the vRtrLdpNgGenIPv4OperDownReason reason code,
appropriate configuration changes in LDP may be required."
::= { tmnxLdpNgNotifications 1 }
vRtrLdpNgIpv6InstStateChange NOTIFICATION-TYPE
OBJECTS {
vRtrLdpNgGenAdminState,
vRtrLdpNgGenIPv6OperState,
vRtrLdpNgInstNotifyReasonCode,
vRtrLdpNgGenIPv6OperDownReason
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrLdpNgIpv6InstStateChange is generated when the IPv6
LDP instance changes state operationally as specified by
vRtrLdpNgGenIPv6OperState.
[EFFECT] Based on the vRtrLdpNgGenIPv6OperDownReason reason code, the
system may not be able to accept new requests from peers.
[RECOVERY] Based on the vRtrLdpNgGenIPv6OperDownReason reason code,
appropriate configuration changes in LDP may be required."
::= { tmnxLdpNgNotifications 2 }
vRtrLdpNgIfStateChange NOTIFICATION-TYPE
OBJECTS {
vRtrLdpNgIfAdminState,
vRtrLdpNgIfOperState,
vRtrLdpNgIfOperDownReason
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrLdpNgIfStateChange notification is generated when the
LDP interface changes state either administratively or operationally.
[EFFECT] Based on the vRtrLdpNgIfOperDownReason reason code, the
system may not be able to accept new requests from peers over this
interface.
[RECOVERY] Based on the vRtrLdpNgIfOperDownReason reason code,
appropriate configuration changes in LDP may be required."
::= { tmnxLdpNgNotifications 3 }
vRtrLdpNgInetIfStateChange NOTIFICATION-TYPE
OBJECTS {
vRtrLdpNgInetIfAdminState,
vRtrLdpNgInetIfOperState,
vRtrLdpNgInetIfOperDownReason
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrLdpNgInetIfStateChange notification is generated when
the LDP sub-interface changes state either administratively or
operationally.
[EFFECT] Based on the vRtrLdpNgInetIfOperDownReason reason code, the
system may not be able to accept new requests over this interface.
[RECOVERY] Based on the vRtrLdpNgInetIfOperDownReason reason code,
appropriate configuration changes in LDP may be required."
::= { tmnxLdpNgNotifications 4 }
vRtrLdpNgTargPeerStateChange NOTIFICATION-TYPE
OBJECTS {
vRtrLdpNgTargPeerAdminState,
vRtrLdpNgTargPeerOperState,
vRtrLdpNgTargPeerOperDownReason
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrLdpNgTargPeerStateChange notification is generated
when the LDP peer changes state either administratively or
operationally.
[EFFECT] Based on the vRtrLdpNgTargPeerOperDownReason reason code, the
system may not be able to accept new requests from this peer.
[RECOVERY] Based on the vRtrLdpNgTargPeerOperDownReason reason code,
appropriate configuration changes in LDP may be required."
::= { tmnxLdpNgNotifications 5 }
vRtrLdpNgSessionStateChange NOTIFICATION-TYPE
OBJECTS {
vRtrLdpNgSessState,
vRtrLdpNgSessOverloadState,
vRtrLdpNgSessOverloadDirection,
vRtrLdpNgSessOverloadFecType,
vRtrLdpNgSessOvldFecTypeSubTyp
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrLdpNgSessionStateChange notification is generated when
the LDP Overload Notification message is sent to or received from the
peer vRtrLdpNgPeerLdpId for the combination of
vRtrLdpNgSessOverloadFecType and vRtrLdpNgSessOvldFecTypeSubTyp while
vRtrLdpNgSessState remains 'operational'.
[EFFECT] Once the Local LSR has sent the LDP Overload Notification
message to the peer vRtrLdpNgPeerLdpId for fec and sub type fec
indicated by vRtrLdpNgSessOverloadFecType and
vRtrLdpNgSessOvldFecTypeSubTyp and vRtrLdpNgSessOverloadState has the
value of 'true', then new Label Mapping Messages received for this
peer for the given combination of fec and sub type fec is returned
with a Label Release Message.
If the Local LSR has received an LDP Overload Notification message
from the peer vRtrLdpNgPeerLdpId for fec and sub type fec indicated by
vRtrLdpNgSessOverloadFecType and vRtrLdpNgSessOvldFecTypeSubTyp and
vRtrLdpNgSessOverloadState has the value of 'true', no new Label
Mapping Message for the given combination of fec and sub type fec will
be sent to this peer.
If the Local LSR has received an LDP Overload Notification message
from the peer vRtrLdpNgPeerLdpId for fec and sub type fec indicated by
vRtrLdpNgSessOverloadFecType and vRtrLdpNgSessOvldFecTypeSubTyp and
vRtrLdpNgSessOverloadState has the value of 'false', then the Local
LSR will send all pending and any new Label Mapping Message for the
given combination of fec and sub type fec to this peer.
[RECOVERY] In case the Local LSR sent the LDP Overload Notification
message to the peer vRtrLdpNgPeerLdpId and vRtrLdpNgSessOverloadState
has the value of 'true' for fec and sub type fec indicated by
vRtrLdpNgSessOverloadFecType and vRtrLdpNgSessOvldFecTypeSubTyp, then
appropriate LDP configuration changes may be required on the Local
and/or Remote LSR.
Once the Local LSR is not overloaded anymore, an LDP Overload
Notification message is sent to the peer vRtrLdpNgPeerLdpId and
vRtrLdpNgSessOverloadState has the value of 'false' for given fec and
sub type fec."
::= { tmnxLdpNgNotifications 6 }
vRtrLdpNgSessMaxFecThresChanged NOTIFICATION-TYPE
OBJECTS {
vRtrLdpNgSessParamMaxFec,
vRtrLdpNgSessOperThresLevel,
vRtrLdpNgSessOperMaxFecThreshold
}
STATUS current
DESCRIPTION
"[CAUSE] A vRtrLdpNgSessMaxFecThresChanged notification is generated
when the number of FECs accepted from the peer has exceeded or drops
below vRtrLdpNgSessOperMaxFecThreshold percent of the value specified
by vRtrLdpNgSessParamMaxFec.
New notification will not be generated if multiple internal change
events occur for the same level indicated by
vRtrLdpNgSessOperThresLevel during a 2 minute interval.
If any parameter in FEC limit configuration changes then we would
always raise this trap if current number of FECs are above the
configured threshold or has crossed the threshold downwards. If we
remain on or below the configured threshold before and after the
configuration changes then no trap would be generated.
[EFFECT] No direct effect but if the peer LSR continues to send
further Label Mapping Message, then the number of FECs may exceed the
configured maximum (vRtrLdpNgSessParamMaxFec) resulting in the
generation of vRtrLdpNgSessMaxFecLimitReached notification.
[RECOVERY] Appropriate Configuration changes in local or peer LSR will
be required."
::= { tmnxLdpNgNotifications 7 }
vRtrLdpNgSessMaxFecLimitReached NOTIFICATION-TYPE
OBJECTS {
vRtrLdpNgSessParamMaxFec,
vRtrLdpNgSessOperMaxFecThreshold
}
STATUS current
DESCRIPTION
"[CAUSE] A vRtrLdpNgSessMaxFecLimitReached notification is generated
when the number of FECs accepted from the peer has reached the value
specified by vRtrLdpNgSessParamMaxFec.
If the current number of FECs go below the limit but higher than the
configured threshold and again start to increase and hit the limit a
second time, we will raise a trap if 2 or more minutes have elapsed
since the first vRtrLdpNgSessMaxFecLimitReached trap was sent.
If any parameter in FEC limit configuration changes and the current
number of FECs are equal to or higher than the limit specified by
vRtrLdpPeerMaxFec, then we would always raise the
vRtrLdpNgSessMaxFecLimitReached trap.
[EFFECT] When the number of FECs exceed the configured maximum
(vRtrLdpNgSessParamMaxFec) it results in any of the following:
(1) If vRtrLdpNgSessParamMaxFecLogOnly is set to 'false' and LSR
Overload Capability is supported, then Overload procedure will take
place.
(2) If vRtrLdpNgSessParamMaxFecLogOnly is set to 'false' and LSR
Overload Capability is not supported, Label Mapping Message will be
returned with Label Release Message.
(3) If vRtrLdpNgSessParamMaxFecLogOnly is set to 'true', no action
will be taken.
[RECOVERY] Appropriate Configuration changes in local or peer LSR will
be required."
::= { tmnxLdpNgNotifications 8 }
vRtrLdpNgResourceExhaustion NOTIFICATION-TYPE
OBJECTS {
vRtrID
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrLdpNgResourceExhaustion notification is generated when
CPM or data path resource required for FEC resolution is exhausted.The
new notification will not be generated if multiple internal change
events occur during a 10 minute interval.
[EFFECT] The system may not be able to accept new request from peers.
[RECOVERY] Appropriate configuration changes in LDP may be required."
::= { tmnxLdpNgNotifications 9 }
vRtrLdpNgAddrFecCommMismatch NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrLdpNgAddrFecCommunity
}
STATUS current
DESCRIPTION
"[CAUSE] A vRtrLdpNgAddrFecCommMismatch notification is generated when
two or more peer routers advertising labels for the given address FEC
have been assigned differing communities, or some have been assigned
communities and some have not. It will also be generated if multiple
LDP peer routers have been configured to advertise their local LSR-ID
as a FEC, and those peer routers have been assigned differing communities.
This notification is rate-limited to at most one notification every 60 seconds.
[EFFECT] This condition indicates that the network is misconfigured,
and it is likely that the affected address FEC is not being advertised
to the routers which the operator intends.
[RECOVERY] Analyze, check and fix the community configuration for all
LDP session-parameters and LDP targeted-session peer-templates in the
network to find the error. Start with the configuration on the router
generating the notification, and if this is correct, look next at the
routers advertising the labels to see if their configuration is correct."
::= { tmnxLdpNgNotifications 11 }
END
View Git Blame Copy Permalink