WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/nokia/ALU-PORT-MIB

10663 lines
385 KiB
Plaintext
Raw Blame History

ALU-PORT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, Counter64,
Unsigned32, Integer32, Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION, TimeStamp,
TruthValue, RowStatus, DateAndTime,
DisplayString FROM SNMPv2-TC
TNamedItemOrEmpty, TmnxActionType,
TItemLongDescription, TQueueId,
TmnxPortID, TmnxEnabledDisabled FROM TIMETRA-TC-MIB
tmnxDS1PortEntry, tmnxPortPortID,
tmnxPortEtherEntry, tmnxDS0ChanGroupEntry,
tmnxPortNotifyPortId, tmnxDS1Entry,
TmnxDs0ChannelList,
TmnxDSXIdleFillType, TmnxDSXIdleCycleFlags,
TmnxDSXClockSource,
tmnxPortCemStatsEntry,
tmnxFrIntfEntry, tmnxPortEntry FROM TIMETRA-PORT-MIB
tmnxChassisIndex FROM TIMETRA-CHASSIS-MIB
aluSARMIBModules FROM ALU-SAR-GLOBAL-MIB
aluHwObjs, aluHwConformance,
aluHwNotification FROM ALU-CHASSIS-MIB
frCircuitEntry FROM FRAME-RELAY-DTE-MIB
pethPsePortEntry,
pethPsePortPowerClassifications,
pethPsePortDetectionStatus FROM POWER-ETHERNET-MIB
dot1xPaePortNumber FROM IEEE8021-PAE-MIB
;
aluPortMIBModule MODULE-IDENTITY
LAST-UPDATED "0809100000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia 7x50 Support
Web: http://www.nokia.com/comps/pages/carrier_support.jhtml"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision the
hardware components of the Nokia 7x50 device.
Copyright 2003-2015 Nokia. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Nokia
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Nokia
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
--
-- Revision History
--
REVISION "0801090000Z"
DESCRIPTION "Rev 1.0 09 Jan 2008 00:00
1.0 release of the ALU-PORT-MIB."
REVISION
"0809100000Z" -- 10 Sept 2008 00:00
DESCRIPTION
"Rev 1.1.2 for 2.0 release of the ALU-PORT-MIB.
1) synchonous ethernet support
2) tdm port ACR statistics"
::= { aluSARMIBModules 2 }
aluPortObjs OBJECT IDENTIFIER ::= { aluHwObjs 4 }
aluPortNotifyPrefix OBJECT IDENTIFIER ::= { aluHwNotification 2}
aluPortNotification OBJECT IDENTIFIER ::= { aluPortNotifyPrefix 0 }
aluPortNotificationObjects OBJECT IDENTIFIER ::= { aluHwObjs 7 }
aluPortStatsObjs OBJECT IDENTIFIER ::= { aluHwObjs 12 }
aluPortConformance OBJECT IDENTIFIER ::= { aluHwConformance 4 }
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- ALU-PORT-MIB textual conventions
--
--
-- AluRS232ReportStatus
--
AluRS232ReportStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The AluRS232ReportStatus is a bitmask that describes alarms that
can be raised/cleared on a Serial Port:
hcmOof - local HCM out-of-frame errors
hcmRai - remote HCM alarm indication
ctrlLeadMon - control lead monitoring is forcing link down
monClockDev - monitoring of clock deviation is forcing link down
monDataInac - monitoring of data inactivity is forcing link down
"
SYNTAX BITS {
notUsed (0),
hcmOof (1),
hcmRai (2),
ctrlLeadMon (3),
monClockDev (4),
monDataInac (5)
}
--
-- AluRS232ControlLead
--
AluRS232ControlLead ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The programmed setting of a Serial control lead."
SYNTAX INTEGER {
high (1),
low (2),
end-to-end (3)
}
--
-- AluVoicePortTlp
--
AluVoicePortTlp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"AluVoicePortTlp is a signed integer that indicates the Transmission
Level Points level in tenths of decibels.
"
SYNTAX Integer32 (-160..70)
--
-- AluVoiceSignalingLead
--
AluVoiceSignalingLead ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The programmed setting of a Voice signaling lead."
SYNTAX INTEGER {
notApplicable (0),
high (1),
low (2),
end-to-end (3)
}
--
-- AluDslTpsTcType
--
AluDslTpsTcType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TPS-TC type of an Alu DSL Port or Alu DSL Line."
SYNTAX INTEGER {
none (0),
atm (4),
efm (2)
}
--
-- AluDslAdminState
--
AluDslAdminState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The desired administrative status of this DSL Line."
SYNTAX INTEGER {
outOfService (0),
inService (1)
}
--
-- AluDataReportStatus
--
AluDataReportStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The AluDataReportStatus is a bitmask that indicates the type of alarms
that can be raised/cleared on a Data Port:
ais - alarm indication signal errors.
los - loss of signal errors.
rai - remote alarm indication events.
"
SYNTAX BITS {
notUsed (0),
ais (1),
los (2),
rai (3)
}
--
-- AluRS232ControlLeadMon
--
AluRS232ControlLeadMon ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The programmed monitor setting of a Serial control lead.
on - detected transitions will trigger
aluRS232ControlLeadsSignalChange
off - disabled; no monitoring performed
high - same as 'on' and, control lead transitions to high will
be treated as a port fault condition
low - same as 'on' and, control lead transitions to low will
be treated as a port fault condition
"
SYNTAX INTEGER {
on (1),
off (2),
high (3),
low (4)
}
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- ALU-PORT-MIB at a glance
--
-- timetra (enterprises 6527)
-- timetraBasedProducts (6)
-- aluServiceAggrRouters (1)
-- aluSARObjects (2)
-- aluSARMIB (1)
-- aluSARConfs (1)
-- aluSARObjs (2)
-- aluHwObjs (aluSARObjs 2)
-- aluSARNotifyPrefix (3)
--
-- aluPortObjs (aluHwObjs 4)
-- aluExtTmnxDS1PortTable (1)
-- aluExtTmnxPortEtherTable (2)
-- aluExtTmnxDS1Table (3)
-- aluRS232PortTable (4)
-- aluRS232Table (5)
-- aluRS232ChanGroupTable (6)
-- aluVoicePortTable (7)
-- aluVoiceTable (8)
-- aluVoiceChanGroupTable (9)
-- aluGponPortTable (10)
-- aluDslPortTable (11)
-- aluXdslLineTable (12)
-- aluShdslLineTable (13)
-- aluDataPortTable (14)
-- aluDataTable (15)
-- aluDataChanGroupTable (16)
-- aluScadaBridgeTable (20)
-- aluSerialMddbTable(21)
-- aluScadaBranchTable (22)
-- aluPortCfmLbVlanTable (23)
-- aluGnssPortTable (24)
--
-- aluPortNotificationObjects (aluHwObjs 7)
-- aluPortEtherSfpESyncCompatibility (1)
-- aluPortNotifyRS232AlarmReason (2)
-- aluPortNotifyDataAlarmReason (3)
--
-- aluPortStatsObjs (aluHwObjs 12)
-- aluPortDiscardStatsTable (1)
-- aluPortAcrClkStatsTable (2)
-- aluPortAcrClkStatsShortIntervalTable (3)
-- aluPortNetIngressControlStatsTable (4)
-- aluPortNetEgressControlStatsTable (5)
-- aluGponPortCurrentTable (6)
-- aluGponPortPreviousTable (7)
-- aluXdslLineStatsTable (8)
-- aluShdslLineStatsTable (9)
-- aluPortCtlStatsTable (10)
-- aluFrIfStatsTable(11)
-- aluExtFrCircuitTable(12)
-- aluEthPtpTimestampStatsTable (13)
-- aluPortNetRingAddDropStatsTable (14)
--
--
-- ALU Extensions of Tmnx DS1 Port table
--
aluExtTmnxDS1PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluExtTmnxDS1PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluExtTmnxDS1PortTable has an entry for a DS1 physical port."
::= { aluPortObjs 1 }
aluExtTmnxDS1PortEntry OBJECT-TYPE
SYNTAX AluExtTmnxDS1PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents extended functionality of a physical
DS1 port on Nokia 7705 SAR devices. Entries cannot be
created or deleted via SNMP SET operations. Entries in this table
will be created or deleted automatically when entries in the
tmnxDS1PortTable are created or deleted."
AUGMENTS { tmnxDS1PortEntry }
::= { aluExtTmnxDS1PortTable 1 }
AluExtTmnxDS1PortEntry ::=
SEQUENCE {
aluExtDS1PortLineImpedance INTEGER,
aluExtDS1PortLineEncoding INTEGER
}
aluExtDS1PortLineImpedance OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
impedance75Ohms (1),
impedance100Ohms (2),
impedance120Ohms (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluExtDS1PortLineImpedance indicates the current line
impedance set on the physical T1/E1 port.
T1 Ports may only be configured to have an impedance of 100 Ohms.
E1 Ports may be configured to have an impledance of either 75 or
120 Ohms where the default impedance is 120 Ohms."
DEFVAL { impedance100Ohms }
::= { aluExtTmnxDS1PortEntry 1 }
aluExtDS1PortLineEncoding OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
b8zs (1),
ami (2),
hdb3 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluExtDS1PortLineEncoding indicates the Zero Code
Suppression set on the physical T1/E1 port."
DEFVAL { b8zs }
::= { aluExtTmnxDS1PortEntry 2 }
aluExtTmnxPortEtherTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluExtTmnxPortEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluExtTmnxPortEtherTable has an entry for each Ethernet port."
::= { aluPortObjs 2 }
aluExtTmnxPortEtherEntry OBJECT-TYPE
SYNTAX AluExtTmnxPortEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents extended functionality of a Ethernet port
on Nokia 7705 SAR devices. Entries cannot be
created or deleted via SNMP SET operations. Entries in this table
will be created or deleted automatically when entries in the
tmnxPortEtherTable are created or deleted."
AUGMENTS { tmnxPortEtherEntry }
::= { aluExtTmnxPortEtherTable 1 }
AluExtTmnxPortEtherEntry ::=
SEQUENCE {
aluExtPortEtherSfpSyncEStatus INTEGER,
aluExtPortEtherLoopback INTEGER,
aluExtPortEtherLoopbackTimer Unsigned32,
aluExtPortEtherLoopbackTimeLeft Unsigned32,
aluExtPortEtherNwSchedulerMode INTEGER,
aluExtPortEtherLoopbackCfmLbMode INTEGER,
aluExtPortEtherCfmLbmRx Counter64,
aluExtPortEtherCfmLbmDropped Counter64,
aluExtPortEtherCfmLbrTx Counter64,
aluExtPortEtherLoopbackSwapMacAddr TruthValue,
aluExtPortEtherAdminPhyTxClock INTEGER,
aluExtPortEtherOperPhyTxClock INTEGER,
aluEthPtpTimestampCapable TruthValue,
aluEthPtpTimestampEnable TruthValue,
aluEthPtpAsymmetry Integer32,
aluExtPortEtherLoopbackPersist TruthValue,
aluPortEtherIngressRateCbs Unsigned32,
aluPortEtherIngressRateSrcPause TruthValue,
aluPortEtherXorMode INTEGER,
aluPortEtherEgrUnshapedSapCir Integer32,
aluExtPortEtherVlanFilter INTEGER,
aluExtPortEtherCfmLbVlanList OCTET STRING,
aluExtPortEtherAccEgrShaper TNamedItemOrEmpty,
aluExtPortEtherNetEgrShaper TNamedItemOrEmpty,
aluPortEtherEgrUnshapedNwIfCir Integer32,
aluExtPortEtherEgrRateIncludeFCS TruthValue,
aluPortEtherOperXorMode INTEGER,
aluExtPortEtherBnAllowed TruthValue,
aluExtPortEtherBnHoldTime Unsigned32
}
--
-- Port ESync Status
--
aluExtPortEtherSfpSyncEStatus OBJECT-TYPE
SYNTAX INTEGER {
not-applicable (0),
capable (1),
incapable (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluExtPortEtherSfpSyncEStatus indicates whether or not
the SFP installed in the port is capabable of supporting synchronous
Ethernet (syncE) communications.
not-applicable - The port does not support an SFP or the SFP is not
installed.
capable - The SFP installed in the port is capable of supporting
synchronous Ethernet operations.
incapable - The SFP installed in the port is incapable of supporting
synchronous Ethernet operations.
On MDAs that only support TIMETRA-CHASSIS::tmnxMDASynchronousEthernet
with a value of 'not-applicable(0)', aluExtPortEtherSfpSyncEStatus
will be 'not-applicable (0)'."
DEFVAL { not-applicable }
::= { aluExtTmnxPortEtherEntry 1 }
--
-- aluExtPortEtherLoopback
--
aluExtPortEtherLoopback OBJECT-TYPE
SYNTAX INTEGER {
none (0),
line (1),
internal (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluExtPortEtherLoopback is used to put an ethernet port into a loopback mode.
Setting aluExtPortEtherLoopback must be accompanied by setting aluExtPortEtherLoopbackTimer
for the same port.
A 'line' loopback loops frames received on this port back to the remote system.
An 'internal' loopback loops frames from the local system back at the framer.
Use 'none' to turn off either one of the above loopback mode.
The Nokia 7705 SAR devices restrict the following interactions:
- A 'line' loopback is only allowed on ports with aluExtPortEtherLoopbackCfmLbMode set to 'disabled'.
- An 'internal' loopback is only allowed on ports with tmnxPortMode set to 'access (1)'.
- aluExtPortEtherLoopback can only be 'none' if dot3OamAdminState of the port is 'enable (2)'.
- aluExtPortEtherLoopback can only be 'none' if aluExtPortEtherLoopbackCfmLbMode of the port is not 'disabled (0)'. "
DEFVAL { none }
::= { aluExtTmnxPortEtherEntry 2}
aluExtPortEtherLoopbackTimer OBJECT-TYPE
SYNTAX Unsigned32 (0|30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluExtPortEtherLoopbackTimer is used to specify the time duration, in seconds, to set the ethernet port
into a loopback mode. Setting aluExtPortEtherLoopbackTimer to a non-zero value must be accompanied by
setting aluExtPortEtherLoopback to either 'line' or 'internal' for the same port. When this timer expires,
it will be reset to the default value 0 by the system.
Set aluExtPortEtherLoopbackTimer to 0 to keep the loopback mode until modified by the operator.
While setting aluExtPortEtherLoopback to 'line' on a network port, aluExtPortEtherLoopbackTimer CAN NOT be set to 0.
While setting aluExtPortEtherLoopback on an access port, aluExtPortEtherLoopbackTimer CAN be set to 0.
While setting aluExtPortEtherLoopback to 'none', aluExtPortEtherLoopbackTimer MUST be set to 0.
While setting aluExtPortEtherLoopbackPersist to 'true', aluExtPortEtherLoopbackTimer CAN NOT be set to a non-zero value."
DEFVAL { 0 }
::= { aluExtTmnxPortEtherEntry 3}
aluExtPortEtherLoopbackTimeLeft OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherLoopbackTimeLeft is used to specify the number of seconds left since the loopback has started.
0 if aluExtPortEtherLoopbackTimer was assigned 0, or when aluExtPortEtherLoopback is 'none'."
::= { aluExtTmnxPortEtherEntry 4}
--
-- Port Egress Scheduler Mode
--
aluExtPortEtherNwSchedulerMode OBJECT-TYPE
SYNTAX INTEGER {
profile (0),
four-priority (1),
sixteen-priority (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluExtPortEtherNwSchedulerMode indicates the mode that the
egress scheduler is provisioned to operate in.
profile - Basic in/out scheduling
four-priority - Expedited/Best-Effort plus in/out scheduling
sixteen-priority - Straight Priority CIR/EIR scheduling
The value of aluExtPortEtherNwSchedulerMode is only configurable on network
ethernet ports. The port must be shutdown to modify this value.
MDAs that can support sixteen-priority do not support profile or four-priority mode.
Thus, when ports are created for these MDAs, aluExtPortEtherNwSchedulerMode of these ports is
initialized with 'sixteen-priority'."
DEFVAL { profile }
::= { aluExtTmnxPortEtherEntry 5 }
aluExtPortEtherLoopbackCfmLbMode OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
priority-low (1),
priority-high (2),
priority-dot1p (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluExtPortEtherLoopbackCfmLbMode is to enable/disable an ethernet port to reply to an ethernet CFM
Loopback Message (LBM) frame at the port level. If enabled then it indicates the desired egress QoS
priority treatment for the CFM Loopback Reply (LBR) frame.
- disabled (0) : disables the handling of LBM.
- priority-low (1) : enables the handling of LBM by sending LBR using low priority QoS treatment.
- priority-high (2) : enables the handling of LBM by sending LBR using high priority QoS treatment.
- priority-dot1p (3) : enables the handling of LBM classification based on the Dot1p priority. LBR will be forwarded
to the corresponding egress queues based on the policy configuration.
When enabled, all imcoming layer 2 LBM's frames (i.e. not encapsulated within any tunnel/services), with
MAC destination address matched with the port address, will be processed. An LBR will be generated, in
reverse direction, back toward the sender. The LBR's contain the same content as the received LBM's, with
the exception of the swapping for source and destination MAC addresses, and the CFM op code being set to
indicate frame type being LBR.
The Nokia 7705 SAR devices has the following restrictions:
- Only one port per MDA can have the cfm-loopback enabled at a time.
- aluExtPortEtherLoopbackCfmLbMode can only be 'disabled' if aluExtPortEtherLoopback is not set to 'none'.
- aluExtPortEtherLoopbackCfmLbMode can not be changed from one priority to another, i.e. once it is enabled
to a priority, it can only be modified to 'disabled'.
- priority-dot1p is allowed only on physical ring ports. CFM LB frames destined to these physical ring ports
with aluExtPortEtherLoopbackCfmLbMode being priority-dot1p will be processed and replied only if ithey have
no Vlan tags, or with Vlan tags of Vlan IDs specified by aluExtPortEtherCfmLbVlanList."
DEFVAL { disabled }
::= { aluExtTmnxPortEtherEntry 6}
aluExtPortEtherCfmLbmRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherCfmLbmRx indicates the received number of Ethernet
CFM Loopback messages (ETH-LBM) with destination MAC address matches
tmnxPortMacAddress of this port, while aluExtPortEtherLoopbackCfmLbMode
is enabled.
aluExtPortEtherCfmLbmRx should be the sum of aluExtPortEtherCfmLbmDropped
and aluExtPortEtherCfmLbrTx of the port."
::= { aluExtTmnxPortEtherEntry 7 }
aluExtPortEtherCfmLbmDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherCfmLbmDropped indicates the number of received, but
discarded Ethernet CFM Loopback messages (ETH-LBM) at this port
while its aluExtPortEtherLoopbackCfmLbMode is enabled."
::= { aluExtTmnxPortEtherEntry 8 }
aluExtPortEtherCfmLbrTx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherCfmLbrTx indicates the number of Ethernet CFM
Loopback Replies (ETH-LBR) that were sent back to the sender, in reponding to the
received ETH-LBM at this port while aluExtPortEtherLoopbackCfmLbMode is
enabled."
::= { aluExtTmnxPortEtherEntry 9 }
aluExtPortEtherLoopbackSwapMacAddr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates if Source and Destination MAC addresses in the packets are to be
interchanged before being loopbacked to the sender. Setting aluExtPortEtherLoopbackSwapMacAddr
must be accompanied by setting aluExtPortEtherLoopback for the same port."
DEFVAL { false }
::= { aluExtTmnxPortEtherEntry 10 }
aluExtPortEtherAdminPhyTxClock OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
slave (1),
master (2),
auto-pref-slave (3),
auto-pref-master (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluExtPortEtherAdminPhyTxClock indicates the mode
used to establish timing control of a 1000BASE-T port. The
aluExtPortEtherAdminPhyTxClock is used to control the setting
of register 9, bits 10-12 that are described in Table 40-3 of
IEEE 802.3-2008.
Register 9.12, the MASTER-SLAVE Manual Config Enable bit, is
cleared when 'auto-pref-slave (3)' or 'auto-pref-master (4)'
is configured. Otherwise the register 9.12 bit is set.
Register 9.10 will be cleared when 'auto-pref-slave (3)' is
configured and 'auto-pref-master (4)' will cause register 9.10
to be cleared.
When aluExtPortEtherAdminPhyTxClock is 'slave (1)', register
9.11, the MASTER-SLAVE Manual Config Value bit, is cleared. When
aluExtPortEtherAdminPhyTxClock is 'master (2)' MASTER-SLAVE
Manual Config Value bit is set.
For ports that cannot support 1000BASE-T, aluExtPortEtherAdminPhyTxClock
will be defaulted to 'notApplicable (0)' and cannot be changed.
For ports that support 1000BASE-T, setting aluExtPortEtherAdminPhyTxClock
to 'notApplicable (0)' will result in aluExtPortEtherAdminPhyTxClock
being set to the DEFVAL value of 'auto-pref-slave (3)'.
Setting aluExtPortEtherAdminPhyTxClock on 1000BaseT microwave aware
ports (ie. ports associated with ALU-MICROWAVE-PORT::aluMwRadioPortID)
is allowed but it does not establish timing control of the 1000BASE-T
port. The operational aspects of microwave ports with respect to timing
control is described under aluExtPortEtherOperPhyTxClock"
REFERENCE "IEEE Std 802.3-2008 Section 40.5"
DEFVAL { auto-pref-slave }
::= { aluExtTmnxPortEtherEntry 11 }
aluExtPortEtherOperPhyTxClock OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
slave (1),
master (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluExtPortEtherOperPhyTxClock indicates the operational
value of the MASTER-SLAVE Configuration Resolution bit of register 10
from Table 40-3 of IEEE 802.3-2008. When the bit is cleared the
aluExtPortEtherOperPhyTxClock is 'slave (1)' and when the bit is set
the aluExtPortEtherOperPhyTxClock is 'master (2)'.
If a port is not 1000BASE-T, down or failed,
aluExtPortEtherOperPhyTxClock is 'notApplicable (0)'.
On 1000BaseT microwave aware ports (ie. ports associated with
ALU-MICROWAVE-PORT::aluMwRadioPortID) are always 'master(2)'."
REFERENCE "IEEE Std 802.3-2008 Section 40.5"
::= { aluExtTmnxPortEtherEntry 12 }
aluEthPtpTimestampCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluEthPtpTimestampCapable indicates whether
the hardware is capable of supporting 1588 PTP time stamp
functions."
::= { aluExtTmnxPortEtherEntry 13 }
aluEthPtpTimestampEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the aluEthPtpTimestampEnable attribute indicate whether
the port is enabled to support 1588 PTP edge time stamp
functions."
::= { aluExtTmnxPortEtherEntry 14 }
aluEthPtpAsymmetry OBJECT-TYPE
SYNTAX Integer32 (-8388608..8388607)
UNITS "nanoseconds"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"aluEthPtpAsymmetry is a path asymmetry correction value
that is used to specify the difference in transmission time
between master-to-slave and slave-to-master. The value
can be derived from the following formula.
(ingress propagation time - egress propagation time)/2.
This object was made obsolete for revision 9.0 on Nokia 7705 SROS
series systems; it was replaced by tmnxPortEtherPTPAsymmetry. "
DEFVAL { 0 }
::= { aluExtTmnxPortEtherEntry 15}
aluExtPortEtherLoopbackPersist OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this variable to 'true' indicates the configuration of aluExtPortEtherLoopback,
aluExtPortEtherLoopbackPersist, aluExtPortEtherLoopbackSwapMacAddr can be saved
to persist over system reboots.
Setting aluExtPortEtherLoopbackPersist to 'true' can only be applied to an ethernet
port in access mode, and it must be accompanied by setting aluExtPortEtherLoopback.
While setting aluExtPortEtherLoopbackPersist to true, aluExtPortEtherLoopbackTimer
cannot be set to a non-zero value."
DEFVAL { false }
::= { aluExtTmnxPortEtherEntry 16 }
aluPortEtherIngressRateCbs OBJECT-TYPE
SYNTAX Unsigned32 (1..130816)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluPortEtherIngressRateCbs specifies the committed burst size that hard policer can accept while complying
to the ingress rate tmnxPortEtherIngressRate of the port.
aluPortEtherIngressRateCbs is not applicable when tmnxPortEtherIngressRate is -1.
Setting tmnxPortEtherIngressRate to -1 causes aluPortEtherIngressRateCbs of the port
to revert back to its default value.
aluPortEtherIngressRateCbs must be configured in multiples of 256 bytes."
DEFVAL { 130816 }
::= { aluExtTmnxPortEtherEntry 17}
aluPortEtherIngressRateSrcPause OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluPortEtherIngressRateSrcPause indicates whether to send a pause frame for every dropped packet
by the hard policer when tmnxPortEtherIngressRate is > 0.
aluPortEtherIngressRateSrcPause is not applicable when tmnxPortEtherIngressRate is -1.
Setting tmnxPortEtherIngressRate to -1 causes aluPortEtherIngressRateSrcPause of the port
to revert back to its default value."
DEFVAL { false }
::= { aluExtTmnxPortEtherEntry 18}
aluPortEtherXorMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
rj45 (1),
sfp (2),
rjp5 (3),
auto (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aluPortEtherXorMode variable specifies the type of physical connector
for MDA ports which support configurable connector type. aluPortEther
must be 'notApplicable' if the MDA port does not support xor mode configuration."
DEFVAL { rj45 }
::= { aluExtTmnxPortEtherEntry 19}
aluPortEtherEgrUnshapedSapCir OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..10000000)
UNITS "kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluPortEtherEgrUnshapedSapCir specifies the egress CIR of all unshaped SAPs,
i.e. all SAPs using this port that have aluSapEgressSchedulerMode in 4-priority-mode."
DEFVAL { 0 }
::= { aluExtTmnxPortEtherEntry 20 }
aluExtPortEtherVlanFilter OBJECT-TYPE
SYNTAX INTEGER (-1 | 1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluExtPortEtherVlanFilter specifies the VLAN filter provisioned for bridge ethernet
ports. The value -1 indicates that no VLAN filter is configured."
DEFVAL { -1 }
::= { aluExtTmnxPortEtherEntry 21}
aluExtPortEtherCfmLbVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aluExtPortEtherCfmLbVlanList is an OCTET STRING in which a list of Vlan Ids to be enabled for cfm Loopback when
aluExtPortEtherLoopbackCfmLbMode is priority-dot1p.
Any incoming CFM LB frame destined for this tmnxPortPortID will be processed if it has no vlan tags or if it has a vlan tag
matched with those specified in this string aluExtPortEtherCfmLbVlanList.
Either string 'none' or empty string can be use to disable cfm loopback on all vlans on the port.
If aluExtPortEtherLoopbackCfmLbMode is priority-dot1p while aluExtPortEtherCfmLbVlanList is 'none' or an empty string,
Any incoming CFM LB frame destined for this tmnxPortPortID will get processed and replied only if it has no Vlan tags.
Acceptable characters in the string are:
- numbers within the range [1..4094] ,
- comma (,),
- hyphen (-) to indicate a range of consecutive numbers.
- string 'none'
Those characters can be combined using syntax below:
- aluExtPortEtherCfmLbVlanList can have multiple numbers or some ranges with a comma ',' separating them with no spaces.
- It's acceptable to have a same number specified more than once in the string, and this number is only counted as one vlan id toward the maximum limit of max vlan ids per port.
Examples of valid strings:
1
1,2,10,4094
100-109,11,6,4-8,11
Examples of invalid strings:
1, : should not end the string with any character other than a valid number/digit.
1.5 : only a comma is accepted, a period is invalid
1, 5 : a space is not acceptable
200-220 : there are 21 vlan id's in this range, exceeded the maximum of 16 vlan ids per port."
DEFVAL { ''H } -- the empty string
::= { aluExtTmnxPortEtherEntry 22 }
aluExtPortEtherAccEgrShaper OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluExtPortEtherNetEgrShaper contains the access egress shaper policy if the tmnxPortMode is hybrid.
Otherwise this object has no significance."
DEFVAL { ''H } -- the empty string
::= { aluExtTmnxPortEtherEntry 23 }
aluExtPortEtherNetEgrShaper OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluExtPortEtherNetEgrShaper contains the network egress shaper policy if the tmnxPortMode is hybrid.
Otherwise this object has no significance."
DEFVAL { ''H } -- the empty string
::= { aluExtTmnxPortEtherEntry 24 }
aluPortEtherEgrUnshapedNwIfCir OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..10000000)
UNITS "kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluPortEtherEgrUnshapedNwIfCir specifies the egress CIR of all unshaped network interfaces
on this port, i.e. those network interfaces on this port without a network queue policy, their
aluVrtrIfNetworkEgrQueuePol is empty."
DEFVAL { 0 }
::= { aluExtTmnxPortEtherEntry 25 }
aluExtPortEtherEgrRateIncludeFCS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates if the value of tmnxPortEtherEgressRate of the port includes 4 bytes
of ethernet frame check sequence (FCS)."
DEFVAL { false }
::= { aluExtTmnxPortEtherEntry 26 }
aluPortEtherOperXorMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
rj45 (1),
sfp (2),
rjp5 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluPortEtherOperXorMode specifies the type of physical connector used
when MDA ports are configured as auto xor mode. aluPortEtherOperXorMode
must be 'notApplicable' if the MDA port does not support xor mode configuration."
::= { aluExtTmnxPortEtherEntry 27}
aluExtPortEtherBnAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aluExtPortEtherBnAllowed allows the handling of the received ETH-BN to be processed,
and possibly to enforce the bandwidth indicated in the ETH-BN by changing the egress-rate
of the port.
When modify aluExtPortEtherBnAllowed to 'true', aluExtPortEtherBnHoldTime is set to its
default value automatically if it is not explicitly provided."
DEFVAL { false }
::= { aluExtTmnxPortEtherEntry 28 }
aluExtPortEtherBnHoldTime OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluExtPortEtherBnHoldTime is the time interval to hold aluExtPortEtherBnEgressRateInUse
when changed. This guards against excessive rate changes.
aluExtPortEtherBnHoldTime is applicable only when aluExtPortEtherBnAllowed is 'true'."
DEFVAL { 5 }
::= { aluExtTmnxPortEtherEntry 29 }
--
-- ALU Extensions of Tmnx DS1 table
--
aluExtTmnxDS1Table OBJECT-TYPE
SYNTAX SEQUENCE OF AluExtTmnxDS1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluExtTmnxDS1Table has an entry for a DS1 physical port or channel."
::= { aluPortObjs 3 }
aluExtTmnxDS1Entry OBJECT-TYPE
SYNTAX AluExtTmnxDS1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents extended functionality of a DS1 physical
port or channel on Nokia 7705 SAR devices. Entries cannot be
created or deleted via SNMP SET operations. Entries in this table
will be created or deleted automatically when entries in the
tmnxDS1Table are created or deleted."
AUGMENTS { tmnxDS1Entry }
::= { aluExtTmnxDS1Table 1 }
AluExtTmnxDS1Entry ::=
SEQUENCE {
aluExtDS1HoldTimeUp Unsigned32,
aluExtDS1HoldTimeDown Unsigned32,
aluExtDS1SignalBitsState OCTET STRING,
aluExtDS1E1Ssm TruthValue,
aluExtDS1E1SsmTxDus TruthValue,
aluExtE1SsmSaBit Unsigned32,
aluExtDs1E1TxSsmValue Unsigned32,
aluExtDs1E1RxSsmValue Unsigned32
}
aluExtDS1HoldTimeUp OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluExtDS1HoldTimeUp is used to configure the
hold-timer for link up event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transitions of the interface to
upper layer protocols until the configured timer has expired.
A value of zero (0) indicates that an up transition is reported
immediately.
Channelized SONET ports have a range of 5..100 where the default
value is 5."
DEFVAL { 0 }
::= { aluExtTmnxDS1Entry 1 }
aluExtDS1HoldTimeDown OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluExtDS1HoldTimeDown is used to configure the
hold-timer for link down event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transitions of the interface to
upper layer protocols until the configured timer has expired.
A value of zero (0) indicates that a down transition is reported
immediately."
DEFVAL { 0 }
::= { aluExtTmnxDS1Entry 2 }
aluExtDS1SignalBitsState OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtDS1SignalBitsState is an array of bytes used to indicate the
current state of the ABCD signalling bits for all timeslots of a
DS1/E1.
The first half of the array or the 32 most significant bytes describe
the RX ABCD bits. The other half describes the TX ABCD bits.
In each half of the array, every byte represents a particular timeslot.
The most significant byte represents timeslot 1. The least significant
byte represents timeslot 32.
The byte arrangement is as follows:
array index: | 0 1 ... 30 31 | 32 33 ... 62 63 |
timeslot: | 1 2 ... 31 32 | 1 2 ... 31 32 |
| <---- RX -----> | <---- TX -----> |
Each byte carries ABCD bits in the least significant nibble. The
byte's most significant bit indicates the validity of the ABCD bits.
The bit arrangement is as follows:
bit pos: | 7 6 5 4 3 2 1 0 |
| V x x x A B C D |
'V' - validity (0 = invalid, 1 = valid)
'x' - don't care
ABCD bits are marked invalid for a variety of situations (eg.
tmnxDS1SignalMode not configured for CAS, timeslot(s) not configured
as part of a channel-group, DS1/E1 status not up, etc.).
For CAS DS1 SF, only the AB signalling bits are supported. The remaining
2 least significant bits in the nibble are undefined.
"
::= { aluExtTmnxDS1Entry 3 }
aluExtDS1E1Ssm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluExtDS1E1Ssm specifies whether or not Synchronous Status
Messages (SSM) are enabled on the DS1/E1 port."
DEFVAL { false }
::= { aluExtTmnxDS1Entry 4 }
aluExtDS1E1SsmTxDus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluExtDS1E1SsmTxDus specifies whether or not the
value 0xF (dus/dnu) is forced in the Synchronous Status Message."
DEFVAL { false }
::= { aluExtTmnxDS1Entry 5 }
aluExtE1SsmSaBit OBJECT-TYPE
SYNTAX Unsigned32 (0|4..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluExtE1SsmSaBit specifies the national use bit to
carry SSM Messages. This applies only to E1 interfaces.
aluExtE1SsmSaBit is not supported on DS1 interfaces and
cannot be written. aluExtE1SsmSaBit on DS1 interfaces shall
default to '0'."
DEFVAL { 8 }
::= { aluExtTmnxDS1Entry 6 }
aluExtDs1E1TxSsmValue OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluExtDs1E1TxSsmValue indicates the Synchronous Status
Message (SSM) value that is transmitted on the line.
On ports that do not support SSM or for ports that do not have
SSM enabled the aluExtDs1E1TxSsmValue will be '254'."
REFERENCE
"Bellcore (Telcordia Technologies) GR-253-CORE, Issue 3, September 2000,
5.4.2.
ITU-T Recommendation G.781, June 1999.
ITU-T Recommendation G.8264, October 2008."
::= { aluExtTmnxDS1Entry 7 }
aluExtDs1E1RxSsmValue OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluExtDs1E1RxSsmValue indicates the last Synchronous Status
Message (SSM) value that was received by the port.
On ports that do not support SSM or for ports that do not have
SSM enabled the aluExtDs1E1RxSsmValue will be '254'.
If ports are administratively enabled and the port is operationally out of
service due to LOS, OOF or AIS the aluExtDs1E1RxSsmValue will be '255'. "
REFERENCE
"Bellcore (Telcordia Technologies) GR-253-CORE, Issue 3, September 2000,
5.4.2.
ITU-T Recommendation G.781, June 1999.
ITU-T Recommendation G.8264, October 2008."
::= { aluExtTmnxDS1Entry 8 }
--
-- ALU RS232 Port table
--
aluRS232PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluRS232PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluRS232PortTable has an entry for a physical Serial Data port."
::= { aluPortObjs 4 }
aluRS232PortEntry OBJECT-TYPE
SYNTAX AluRS232PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a physical Serial Data port on an
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tmnxMDAAssignedType object is
set to a Serial Data Interface (SDI) MDA type. The aluRS232PortEntry
contains attributes that are unique to the 'rs232/v35/x21/rs530'
aluRS232PortType. The tmnxPortPortID contains the slot, mda and port
numbers encoded into it.
For each aluRS232PortEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluRS232PortTable 1 }
AluRS232PortEntry ::=
SEQUENCE {
aluRS232PortLastChangeTime TimeStamp,
aluRS232PortType INTEGER
}
aluRS232PortLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluRS232PortLastChangeTime contains the sysUpTime
value of the most recently modified writable variable in the
aluRS232PortEntry row for this port."
::= { aluRS232PortEntry 1 }
aluRS232PortType OBJECT-TYPE
SYNTAX INTEGER {
rs232 (1),
v35 (2),
x21 (3),
rs530 (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232PortType configures the interface-type of the physical
port to one of the defined values, above.
Regarding sdiv1 and sdiv2 (tmnxMDAAssignedType 11 and 56):
Due to hardware limitations, each port in a port trio must be of the
same aluRS232PortType. For example, if port 1 is configured as rs232,
ports 2 and 3 must be configured as rs232.
Regarding sdiv3 (tmnxMDAAssignedType 71):
Due to hardware limitations, each port in a port duo must be of the
same aluRS232PortType. For example, if port 1 is configured as rs232,
then port 2 must be configured as rs232, too.
v35, x21 and rs530 are not supported on the SAR-H and SAR-Hc systems.
rs530 is not supported on sdiv1 and sdiv2."
DEFVAL { rs232 }
::= { aluRS232PortEntry 2 }
--
-- ALU RS232 table
--
aluRS232Table OBJECT-TYPE
SYNTAX SEQUENCE OF AluRS232Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"aluRS232Table has an entry for each Serial
channel on each IOM card in each chassis in the system."
::= { aluPortObjs 5 }
aluRS232Entry OBJECT-TYPE
SYNTAX AluRS232Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Serial channel on an IOM card
in a chassis in the system. Channel entries for
serial ports can be created and deleted via SNMP SET operations.
For each aluRS232Entry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluRS232Table 1 }
AluRS232Entry ::=
SEQUENCE {
aluRS232RowStatus RowStatus,
aluRS232LastChangeTime TimeStamp,
aluRS232Type INTEGER,
aluRS232DeviceMode INTEGER,
aluRS232DeviceGender INTEGER,
aluRS232Duplex INTEGER,
aluRS232Speed INTEGER,
aluRS232ClockSource INTEGER,
aluRS232Loopback INTEGER,
aluRS232CharacterLength INTEGER,
aluRS232Parity INTEGER,
aluRS232StopBits INTEGER,
aluRS232ReportAlarm AluRS232ReportStatus,
aluRS232ReportAlarmStatus AluRS232ReportStatus,
aluRS232ControlLeadDtrDsr AluRS232ControlLead,
aluRS232ControlLeadRtsDcdC AluRS232ControlLead,
aluRS232ControlLeadAlbCts AluRS232ControlLead,
aluRS232ControlLeadRdlRi AluRS232ControlLead,
aluRS232ControlLeadDsrDtr AluRS232ControlLead,
aluRS232ControlLeadDcdRtsI AluRS232ControlLead,
aluRS232ControlLeadCtsAlb AluRS232ControlLead,
aluRS232ControlLeadRiRdl AluRS232ControlLead,
aluRS232ControlLeadsState OCTET STRING,
aluRS232MultiDrop INTEGER,
aluRS232SBitSignaling INTEGER,
aluRS232DataPosition INTEGER,
aluRS232HoldTimeUp Unsigned32,
aluRS232HoldTimeDown Unsigned32,
aluRS232ControlLeadsSignal OCTET STRING,
aluRS232ControlLeadMonDtrDsr AluRS232ControlLeadMon,
aluRS232ControlLeadMonRtsDcdC AluRS232ControlLeadMon,
aluRS232ControlLeadMonAlbCts AluRS232ControlLeadMon,
aluRS232ControlLeadMonRdlRi AluRS232ControlLeadMon,
aluRS232ClockSyncState INTEGER,
aluRS232ClockMasterPortId TmnxPortID,
aluRS232InvertClock TmnxEnabledDisabled,
aluRS232MonClockDeviationRaise Unsigned32,
aluRS232MonClockDeviationClear Unsigned32,
aluRS232MonDataInactivityRaise Unsigned32,
aluRS232MonDataInactivityClear Unsigned32
}
aluRS232RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232RowStatus controls the creation and deletion of
row entries in the aluRS232Table.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiMOS encoding scheme."
::= { aluRS232Entry 1 }
aluRS232LastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluRS232LastChangeTime contains the sysUpTime value of the
most recently modified writable variable in the
aluRS232Entry row for this Serial channel."
::= { aluRS232Entry 2 }
aluRS232Type OBJECT-TYPE
SYNTAX INTEGER {
rs232 (1),
v35 (2),
x21 (3),
rs530 (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluRS232Type configures the interface for RS-232, V.35, X.21 or
RS-530."
::= { aluRS232Entry 3 }
aluRS232DeviceMode OBJECT-TYPE
SYNTAX INTEGER {
synchronous (1),
asynchronous (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232DeviceMode configures the interface for
synchronous or asynchronous operation.
Changing to asynchronous results in defaulting of
aluRS232CharacterLength, aluRS232Parity and aluRS232StopBits.
Changing to synchronous results in defaulting of aluRS232ClockSource,
aluRS232InvertClock, aluRS232MonClockDeviationRaise and
aluRS232MonClockDeviationClear.
Valid values depend on aluRS232Speed.
synchronous is not supported on the SAR-H and SAR-Hc systems.
synchronous is not valid while the sub-channel is
aluRS232SocketEntry.
synchronous is not allowed on rs530 while aluRS232MultiDrop is not
disabled.
"
DEFVAL { synchronous }
::= { aluRS232Entry 4 }
aluRS232DeviceGender OBJECT-TYPE
SYNTAX INTEGER {
dte (1),
dce (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232DeviceGender configures the gender offered by the
local interface.
dte is not valid while the sub-channel is aluRS232SocketEntry.
dte is not supported on the SAR-H and SAR-Hc systems.
Regarding sdiv3 (tmnxMDAAssignedType 71):
Due to hardware limitations, each Serial channel in a port duo must
be of the same aluRS232DeviceGender. For example, if the channel on
port 1 is configured as dte, then the channel on port 2 must be
configured as dte, too.
"
DEFVAL { dce }
::= { aluRS232Entry 5 }
aluRS232Duplex OBJECT-TYPE
SYNTAX INTEGER {
fullDuplex (1),
halfDuplex (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232Duplex configures the duplex method of the interface to
half or full duplex.
full is not allowed while aluRS232MultiDrop is slave.
half is not valid while the sub-channel is aluRS232SocketEntry.
"
DEFVAL { fullDuplex }
::= { aluRS232Entry 6 }
aluRS232Speed OBJECT-TYPE
SYNTAX INTEGER {
speed1200 (1),
speed2400 (2),
speed9600 (3),
speed19200 (4),
speed38400 (5),
speed56000 (6),
speed64k (7),
speed128k (8),
speed256k (9),
speed384k (10),
speed512k (11),
speed640k (12),
speed768k (13),
speed896k (14),
speed1024k (15),
speed1152k (16),
speed1280k (17),
speed1408k (18),
speed1536k (19),
speed1664k (20),
speed1792k (21),
speed1920k (22),
speed4800 (23),
speed600 (24),
speed57600 (25),
speed115200 (26),
speed16000 (27),
speed2048k (28),
speed3072k (29),
speed4096k (30),
speed5120k (31),
speed6144k (32),
speed7168k (33),
speed8192k (34),
speed9216k (35),
speed10240k (36),
speed11264k (37),
speed12288k (38),
speed13312k (39),
speed14336k (40),
speed15360k (41),
speed16384k (42)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232Speed specifies the link speed of the Serial interface.
A value of 'speed1200' sets the link to 1200bps. A value of 'speed64k'
sets the link to 64kbps.
Valid values depend on tmnxMDAAssignedType :
sdiv1 : 600, 1200, 2400, 4800, 9600, 19200, 38400, 56000,
64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k,
1280k, 1408k, 1536k, 1664k, 1792k, 1920k
sdiv2 : 600, 1200, 2400, 4800, 9600, 19200, 38400, 56000,
57600, 115200
64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k,
1280k, 1408k, 1536k, 1664k, 1792k, 1920k
sdiv3 : <all speeds>
On the SAR-H and SAR-Hc systems, valid values are the same as sdiv2.
Valid values also depend on aluRS232Type :
rs232 : 600, 1200, 2400, 4800, 9600, 16000, 19200, 38400, 56000,
57600, 115200
64k (sdiv3 only)
v35 : 64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k,
1280k, 1408k, 1536k, 1664k, 1792k, 1920k, 2048k
x21 : 1200, 2400, 4800, 9600, 19200, 38400, 56000,
64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k,
1280k, 1408k, 1536k, 1664k, 1792k, 1920k, 2048k
rs530 : <all speeds except 57600 and 115200>
Valid values also depend on aluRS232DeviceMode :
synchronous : <all speeds except 57600 and 115200>
asynchronous : 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200
Valid values also depend on the sub-channel:
(none) : <no additional restrictions>
aluRS232ChanGroupEntry : <all speeds except 57600 and 115200>
aluRS232SocketEntry : <asynchronous speeds only>
High Capacity Multiplexing (HCM) is supported on
aluRS232ChanGroupEntry only, running at subrate speed:
hcm : 600, 1200, 2400, 4800, 9600, 16000, 19200, 38400, 56000
Valid values also depend on aluRS232ControlLeadXxx :
high : <no additional restrictions>
low : <no additional restrictions>
end-to-end : <HCM speeds only; rs530 exempt>
Valid values also depend on aluRS232MultiDrop :
disabled : <no additional restrictions>
slave : <HCM speeds only>
master : <HCM speeds only>
Default values depend on aluRS232Type :
rs232 : 9600
v35 : 64k
x21 : 64k
rs530 : 64k
"
DEFVAL { speed9600 }
::= { aluRS232Entry 7 }
aluRS232ClockSource OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
slave (1),
external (2),
dcrSerial (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ClockSource specifies the clock for transmitted data
on a serial port.
slave(1) - clock is derived from the system
external(2) - clock is provided by the attached device
dcrSerial(3) - clock is recovered from the differential timestamp in
the RTP header but undirectional only, from attached
source DCE device to attached slave DTE device
aluRS232ClockSource is 'notApplicable' while aluRS232DeviceMode is
asynchronous. The value 'notApplicable' is set by the system.
'external' and 'dcrSerial' are not supported on the SAR-H and SAR-Hc
systems.
'external' and 'dcrSerial' are not supported on sdiv1 and sdiv2.
'external' and 'dcrSerial' are supported on rs232 and rs530 only.
'dcrSerial' is not allowed while aluRS232MultiDrop is not disabled.
"
DEFVAL { slave }
::= { aluRS232Entry 8 }
aluRS232Loopback OBJECT-TYPE
SYNTAX INTEGER {
none (1),
bidirB (2),
bidirE (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232Loopback is used to put the port into a loopback mode.
The value of tmnxPortAdminStatus should be set to outOfService
in order for the loopback to be enabled.
Both loopbacks are bidirectional. They reside in the same device but
relative to each other, 'bidirB' is closer to the system-side.
'bidirB' is not supported while sub-channel is aluRS232SocketEntry.
'bidirB' is not supported on sdiv3.
"
DEFVAL { none }
::= { aluRS232Entry 9 }
aluRS232CharacterLength OBJECT-TYPE
SYNTAX INTEGER (6..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The aluRS232CharacterLength specifies the character length.
Parameter is only valid while the port is configured for asynchronous operation.
The value of aluRS232CharacterLength plus the value of aluRS232StopBits
plus the number of bits needed to encode aluRS232Parity must be less
than or equal to 10. Note that aluRS232Parity 'none' needs ZERO bits.
"
DEFVAL { 8 }
::= { aluRS232Entry 10 }
aluRS232Parity OBJECT-TYPE
SYNTAX INTEGER {
none (1),
odd (2),
even (3),
mark (4),
space (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The aluRS232Parity specifies the parity type.
Parameter is only valid while the port is configured for asynchronous operation.
The value of aluRS232CharacterLength plus the value of aluRS232StopBits
plus the number of bits needed to encode aluRS232Parity must be less
than or equal to 10. Note that aluRS232Parity 'none' needs ZERO bits.
"
DEFVAL { none }
::= { aluRS232Entry 11 }
aluRS232StopBits OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The aluRS232StopBits specifies the stop bits.
Parameter is only valid while the port is configured for asynchronous operation.
The value of aluRS232CharacterLength plus the value of aluRS232StopBits
plus the number of bits needed to encode aluRS232Parity must be less
than or equal to 10. Note that aluRS232Parity 'none' needs ZERO bits.
"
DEFVAL { 1 }
::= { aluRS232Entry 12 }
aluRS232ReportAlarm OBJECT-TYPE
SYNTAX AluRS232ReportStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluRS232ReportAlarm determines when and if to
generate aluEqPortRS232Alarm and aluEqPortRS232AlarmClear
notifications for this port:
hcmOof - Reports local HCM out-of-frame errors.
hcmRai - Reports remote HCM alarm indication.
ctrlLeadMon - control lead monitoring is forcing link down
monClockDev - monitoring of clock deviation is forcing link down
monDataInac - monitoring of data inactivity is forcing link down
hcmOof and hcmRai are valid for subrate (HCM) speeds only.
ctrlLeadMon, monClockDev and monDataInac are supported on sdiv3 only.
monClockDev is not applicable while aluRS232DeviceMode is
asynchronous.
"
DEFVAL { {hcmOof, hcmRai, ctrlLeadMon, monClockDev, monDataInac} }
::= { aluRS232Entry 13 }
aluRS232ReportAlarmStatus OBJECT-TYPE
SYNTAX AluRS232ReportStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluRS232ReportAlarmStatus indicates the alarms on
this port."
::= { aluRS232Entry 14 }
aluRS232ControlLeadDtrDsr OBJECT-TYPE
SYNTAX AluRS232ControlLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadDtrDsr is used to configure the DTR/DSR input lead
to an ASSUMED value.
For RS-232, V.35 and RS-530:
if local gender is DCE, lead indicates Data Terminal Ready
if local gender is DTE, lead indicates Data Set Ready
For X.21:
lead is undefined
Valid values are 'high' and 'low'."
DEFVAL { high }
::= { aluRS232Entry 15 }
aluRS232ControlLeadRtsDcdC OBJECT-TYPE
SYNTAX AluRS232ControlLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadRtsDcdC is used to configure the RTS/DCD/C input lead
to an ASSUMED value.
For RS-232, V.35 and RS-530:
if local gender is DCE, lead indicates Request To Send
if local gender is DTE, lead indicates Data Carrier Detect
For X.21:
if local gender is DCE, lead indicates Control
if local gender is DTE, lead indicates Indication
Valid values are 'high', 'low' and 'end-to-end'.
'end-to-end' is valid only for subrate (HCM) speeds and for interface
configurations compatible with 'satopSerial'."
DEFVAL { high }
::= { aluRS232Entry 16 }
aluRS232ControlLeadAlbCts OBJECT-TYPE
SYNTAX AluRS232ControlLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadAlbCts is used to configure the ALB/CTS input lead
to an ASSUMED value.
For RS-232 and V.35:
if local gender is DCE, lead indicates Analog loopback
if local gender is DTE, lead indicates Clear To Send
For X.21:
lead is undefined
For RS-530, AlbCts represents RlCts:
if local gender is DCE, lead indicates Remote Loopback
if local gender is DTE, lead indicates Clear To Send
Valid values are 'high', 'low' and 'end-to-end'.
This object is not supported on the SAR-H and SAR-Hc systems.
'end-to-end' is valid only for subrate (HCM) speeds and for interface
configurations compatible with 'satopSerial'."
DEFVAL { high }
::= { aluRS232Entry 17 }
aluRS232ControlLeadRdlRi OBJECT-TYPE
SYNTAX AluRS232ControlLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadRdlRi is used to configure the RDL/RI input lead
to an ASSUMED value.
For RS-232:
if local gender is DCE, lead indicates Remote Digital Loopback
if local gender is DTE, lead indicates Ring Indicator
For V.35 and X.21:
lead is undefined
For RS-530, RdlRi represents LlTm:
if local gender is DCE, lead indicates Local Loopback
if local gender is DTE, lead indicates Test Mode
Valid values are 'high' and 'low'.
This object is not supported on the SAR-H and SAR-Hc systems."
DEFVAL { high }
::= { aluRS232Entry 18 }
aluRS232ControlLeadDsrDtr OBJECT-TYPE
SYNTAX AluRS232ControlLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadDsrDtr is used to configure the DSR/DTR output lead
to a FORCED value.
For RS-232, V.35 and RS-530:
if local gender is DCE, lead indicates Data Set Ready
if local gender is DTE, lead indicates Data Terminal Ready
For X.21:
lead is undefined
Valid values are 'high' and 'low'.
This object is not supported on the SAR-H and SAR-Hc systems."
DEFVAL { high }
::= { aluRS232Entry 19 }
aluRS232ControlLeadDcdRtsI OBJECT-TYPE
SYNTAX AluRS232ControlLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadDcdRtsI is used to configure the DCD/RTS/I output lead
to a FORCED value.
For RS-232, V.35 and RS-530:
if local gender is DCE, lead indicates Data Carrier Detect
if local gender is DTE, lead indicates Request To Send
For X.21:
if local gender is DCE, lead indicates Indication
if local gender is DTE, lead indicates Control
Valid values are 'high', 'low' and 'end-to-end'.
'end-to-end' is valid only for subrate (HCM) speeds and for interface
configurations compatible with 'satopSerial'."
DEFVAL { high }
::= { aluRS232Entry 20 }
aluRS232ControlLeadCtsAlb OBJECT-TYPE
SYNTAX AluRS232ControlLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadCtsAlb is used to configure the CTS/ALB output lead
to a FORCED value.
For RS-232 and V.35:
if local gender is DCE, lead indicates Clear To Send
if local gender is DTE, lead indicates Analog loopback
For X.21:
lead is undefined
For RS-530, CtsAlb represents CtsRl:
if local gender is DCE, lead indicates Clear To Send
if local gender is DTE, lead indicates Remote Loopback
Valid values are 'high', 'low' and 'end-to-end'.
'end-to-end' is valid only for subrate (HCM) speeds and for interface
configurations compatible with 'satopSerial'."
DEFVAL { high }
::= { aluRS232Entry 21 }
aluRS232ControlLeadRiRdl OBJECT-TYPE
SYNTAX AluRS232ControlLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadRiRdl is used to configure the RI/RDL output lead
to a FORCED value.
For RS-232:
if local gender is DCE, lead indicates Ring Indicator
if local gender is DTE, lead indicates Remote Digital Loopback
For V.35 and X.21:
lead is undefined
For RS-530, RiRdl represents TmLl:
if local gender is DCE, lead indicates Test Mode
if local gender is DTE, lead indicates Local Loopback
Valid values are 'high' and 'low'."
DEFVAL { high }
::= { aluRS232Entry 22 }
aluRS232ControlLeadsState OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluRS232ControlLeadsState is an array of byte values used to indicate
the current states of the input and output control leads. These state
values are historically known as scan and drive values, respectively.
These state values are the ones that get transported over the network
(provided there is a means, such as HCM). As such, they are sometimes
referred to as NETWORK-side values.
For line-side values, see aluRS232ControlLeadsSignal.
Each byte in the array represents the state of an individual control
lead. The byte order is as follows:
-- DtrDsr (LSB or byte0)
-- RtsDcdC
-- AlbCts
-- RdlRi
-- DsrDtr
-- DcdRtsI
-- CtsAlb
-- RiRdl (MSB or byte7)
A byte value of 1 represents on (or high as per AluRS232ControlLead).
A byte value of 2 represents off (or low as per AluRS232ControlLead).
All other byte values are undefined.
A particular byte is undefined if its config counterpart is undefined.
For example, given an X.21 interface, aluRS232ControlLeadDsrDtr is
undefined thus, aluRS232ControlLeadsState byte 'DtrDsr' is also
undefined.
Some bytes can represent something else depending on the interface
type. For example, given an RS-530, RdlRi represents LlTm.
See the respective object for details (eg. aluRS232ControlLeadRdlRi).
"
::= { aluRS232Entry 23 }
aluRS232MultiDrop OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
slave (2),
master (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232MultiDrop is used to configure the Multi-drop Data Bridge (MDDB)
mode of the interface.
'slave' and 'master' mode is valid for subrate (HCM) speeds only.
Changing to 'slave' results in forcing aluRS232Duplex to 'half' and
aluRS232SBitSignaling to 'off'.
Changing to 'disabled' results in defaulting aluRS232Duplex and
aluRS232SBitSignaling (as aluRS232DataPosition permits).
Changing to 'master' results in forcing aluRS232Duplex to 'full',
aluRS232SBitSignaling to 'on' and aluRS232DataPosition to 'f0b5'.
aluRS232MultiDrop is not valid while the sub-channel is
aluRS232SocketEntry.
"
DEFVAL { disabled }
::= { aluRS232Entry 24 }
aluRS232SBitSignaling OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232SBitSignaling is used to configure the S-Bit signaling
mode of the interface.
This object is valid for subrate (HCM) speeds only.
'on' is not supported while aluRS232MultiDrop is 'slave'.
'on' is not allowed while aluRS232DataPosition is 'f0b6'.
"
DEFVAL { on }
::= { aluRS232Entry 25 }
aluRS232DataPosition OBJECT-TYPE
SYNTAX INTEGER {
f0b5 (1),
f0b6 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232DataPosition is used to configure the HCM data position.
This object is valid for subrate (HCM) speeds only.
'f0b6' is not allowed while aluRS232SBitSignaling is 'on'.
"
DEFVAL { f0b5 }
::= { aluRS232Entry 26 }
aluRS232HoldTimeUp OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "deci-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluRS232HoldTimeUp is used to configure the
hold-timer for link up event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transitions of the interface to
upper layer protocols until the configured timer has expired.
A value of zero (0) indicates that an up transition is reported
immediately."
DEFVAL { 0 }
::= { aluRS232Entry 27 }
aluRS232HoldTimeDown OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "deci-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluRS232HoldTimeDown is used to configure the
hold-timer for link down event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transitions of the interface to
upper layer protocols until the configured timer has expired.
A value of zero (0) indicates that a down transition is reported
immediately."
DEFVAL { 0 }
::= { aluRS232Entry 28 }
aluRS232ControlLeadsSignal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluRS232ControlLeadsSignal is an array of byte values used to indicate
the current signal levels of the input and output control leads
(connected to the attached CPE). These values are the ones that get
signalled over the (physical) line. As such, they are sometimes
referred to as LINE-side values.
For network-side values, see aluRS232ControlLeadsState.
Each byte in the array represents the signal level of an individual
control lead. The byte order is as follows:
-- DtrDsr (LSB or byte0)
-- RtsDcdC
-- AlbCts
-- RdlRi
-- DsrDtr
-- DcdRtsI
-- CtsAlb
-- RiRdl (MSB or byte7)
A byte value of 1 represents on (or high as per AluRS232ControlLead).
A byte value of 2 represents off (or low as per AluRS232ControlLead).
All other byte values are undefined.
A particular byte is undefined if its config counterpart is undefined.
For example, given an X.21 interface, aluRS232ControlLeadDsrDtr is
undefined thus, aluRS232ControlLeadsSignal byte 'DtrDsr' is also
undefined.
Some bytes can represent something else depending on the interface
type. For example, given an RS-530, RdlRi represents LlTm.
See the respective object for details (eg. aluRS232ControlLeadRdlRi).
"
::= { aluRS232Entry 29 }
aluRS232ControlLeadMonDtrDsr OBJECT-TYPE
SYNTAX AluRS232ControlLeadMon
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadMonDtrDsr is used to configure monitoring of the
input control lead signal, DtrDsr. While monitored, detected
transitions will trigger aluRS232ControlLeadsSignalChange.
'high' and 'low' are supported on sdiv3 only."
DEFVAL { off }
::= { aluRS232Entry 30 }
aluRS232ControlLeadMonRtsDcdC OBJECT-TYPE
SYNTAX AluRS232ControlLeadMon
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadMonRtsDcdC is used to configure monitoring of the
input control lead signal, RtsDcdC. While monitored, detected
transitions will trigger aluRS232ControlLeadsSignalChange.
'high' and 'low' are supported on sdiv3 only."
DEFVAL { off }
::= { aluRS232Entry 31 }
aluRS232ControlLeadMonAlbCts OBJECT-TYPE
SYNTAX AluRS232ControlLeadMon
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadMonAlbCts is used to configure monitoring of the
input control lead signal, AlbCts. While monitored, detected
transitions will trigger aluRS232ControlLeadsSignalChange.
For RS-530, AlbCts represents RlCts.
This object is not supported on the SAR-H and SAR-Hc systems.
'high' and 'low' are supported on sdiv3 only."
DEFVAL { off }
::= { aluRS232Entry 32 }
aluRS232ControlLeadMonRdlRi OBJECT-TYPE
SYNTAX AluRS232ControlLeadMon
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ControlLeadMonRdlRi is used to configure monitoring of the
input control lead signal, RdlRi. While monitored, detected
transitions will trigger aluRS232ControlLeadsSignalChange.
For RS-530, RdlRi represents LlTm.
This object is not supported on the SAR-H and SAR-Hc systems.
'high' and 'low' are supported on sdiv3 only."
DEFVAL { off }
::= { aluRS232Entry 33 }
aluRS232ClockSyncState OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
normal (1),
holdOver (2),
freeRun (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluRS232ClockSyncState indicates the current clock
synchronization state if aluRS232ClockSource is 'dcrSerial'.
unknown(0) - Unsupported or unknown state
normal(1) - Normal (locked) state
holdOver(2) - Synchronization with reference has been lost
freeRun(3) - Synchronized with internal reference"
::= { aluRS232Entry 34 }
aluRS232ClockMasterPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluRS232ClockMasterPortId indicates the current clock
synchronization master port id if aluRS232ClockSource is
'dcrSerial'."
::= { aluRS232Entry 35 }
aluRS232InvertClock OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluRS232InvertClock specifies whether to invert the
clock edge that the interface samples for received data (if local
gender is DCE) or transmitted data (if local gender is DTE).
Inverting the clock may correct issues such as those related to phase
shift. For example, data changes state near the interface's sampling
clock edge. Contributors to phase shift variance include, but are not
limited to: cable length and interface rate.
'enabled' not supported on SAR-H and SAR-Hc systems.
'enabled' not supported on sdiv1 and sdiv2.
'enabled' not allowed while aluRS232DeviceMode is asynchronous.
"
DEFVAL { disabled }
::= { aluRS232Entry 36 }
aluRS232MonClockDeviationRaise OBJECT-TYPE
SYNTAX Unsigned32 (0|10..100)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232MonClockDeviationRaise specifies the
amount of time to debounce clock deviation before asserting the port
fault condition, 'monClockDeviation'. Clock deviation is detected
when the external clock exceeds a +/- 6% deviation from the
internal interface rate clock.
The special value 0 means clock deviation monitoring is disabled (ie.
detection off and any concurrent assertion will be cleared
immediately). While this object is 0, aluRS232MonClockDeviationClear
must also be 0.
Non-zero values must be specified in increments of 10.
Non-zero values not supported on SAR-H and SAR-Hc systems.
Non-zero values not supported on sdiv1 and sdiv2.
Non-zero values not allowed while aluRS232DeviceMode is asynchronous.
"
DEFVAL { 0 }
::= { aluRS232Entry 37 }
aluRS232MonClockDeviationClear OBJECT-TYPE
SYNTAX Unsigned32 (0|10..100)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232MonClockDeviationClear specifies the
amount of time to debounce no clock deviation before de-asserting the
port fault condition, 'monClockDeviation'. No clock deviation is
detected when the external clock does not exceed a +/- 6% deviation
from the internal interface rate clock.
The special value 0 means clock deviation monitoring is disabled (ie.
detection off and any concurrent assertion will be cleared
immediately). While this object is 0, aluRS232MonClockDeviationRaise
must also be 0.
Non-zero values must be specified in increments of 10.
Non-zero values not supported on SAR-H and SAR-Hc systems.
Non-zero values not supported on sdiv1 and sdiv2.
Non-zero values not allowed while aluRS232DeviceMode is asynchronous.
"
DEFVAL { 0 }
::= { aluRS232Entry 38 }
aluRS232MonDataInactivityRaise OBJECT-TYPE
SYNTAX Unsigned32 (0|10..100)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232MonDataInactivityRaise specifies the
amount of time to debounce data inactivity before asserting the port
fault condition, 'monDataInactivity'.
The special value 0 means data inactivity monitoring is disabled (ie.
detection off and any concurrent assertion will be cleared
immediately). While this object is 0, aluRS232MonDataInactivityClear
must also be 0.
Non-zero values must be specified in increments of 10.
Non-zero values not supported on SAR-H and SAR-Hc systems.
Non-zero values not supported on sdiv1 and sdiv2.
"
DEFVAL { 0 }
::= { aluRS232Entry 39 }
aluRS232MonDataInactivityClear OBJECT-TYPE
SYNTAX Unsigned32 (0|10..100)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232MonDataInactivityClear specifies the
amount of time to debounce data activity before de-asserting the
port fault condition, 'monDataInactivity'.
The special value 0 means data inactivity monitoring is disabled (ie.
detection off and any concurrent assertion will be cleared
immediately). While this object is 0, aluRS232MonDataInactivityRaise
must also be 0.
Non-zero values must be specified in increments of 10.
Non-zero values not supported on SAR-H and SAR-Hc systems.
Non-zero values not supported on sdiv1 and sdiv2.
"
DEFVAL { 0 }
::= { aluRS232Entry 40 }
--
-- RS232 Channel Group Table
--
aluRS232ChanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluRS232ChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluRS232ChanGroupTable has an entry for 64kbps (DS0) channels
grouped together and belonging to a particular Serial channel."
::= { aluPortObjs 6 }
aluRS232ChanGroupEntry OBJECT-TYPE
SYNTAX AluRS232ChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents one or more Serial channels on an
interface.
Entries can be created and deleted via SNMP SET operations
using the aluRS232ChanGroupRowStatus object.
For each aluRS232ChanGroupEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluRS232ChanGroupTable 1 }
AluRS232ChanGroupEntry ::=
SEQUENCE {
aluRS232ChanGroupRowStatus RowStatus,
aluRS232ChanGroupTimeSlots TmnxDs0ChannelList,
aluRS232ChanGroupMTU Unsigned32,
aluRS232ChanGroupOperMTU Unsigned32,
aluRS232ChanGroupCRC INTEGER,
aluRS232ChanGroupIdleCycleFlags TmnxDSXIdleCycleFlags,
aluRS232ChanGroupPayloadFillType TmnxDSXIdleFillType,
aluRS232ChanGroupPayloadPattern Unsigned32
}
aluRS232ChanGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ChanGroupRowStatus controls the creation and deletion of
row entries in the aluRS232ChanGroupTable. The tmnxPortPortID
for a channel group includes a group ID in the lower bits.
The manager has to first calculate the tmnxPortPortID based on the
TiMOS encoding scheme."
::= { aluRS232ChanGroupEntry 1 }
aluRS232ChanGroupTimeSlots OBJECT-TYPE
SYNTAX TmnxDs0ChannelList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluRS232ChanGroupTimeSlots is a bitmap which is used to
represent the timeslots from a channel group.
The description for TmnxDs0ChannelList contains details of the
bitmap organization."
::= { aluRS232ChanGroupEntry 2 }
aluRS232ChanGroupMTU OBJECT-TYPE
SYNTAX Unsigned32 (0|578..9208)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the largest packet which can be sent/received
on the channel group, specified in octets. For groups that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent.
Setting aluRS232ChanGroupMTU to a value of zero (0), causes the agent
to recalculate the default MTU size which can vary based on the
current setting of tmnxPortMode and tmnxPortEncapType variables.
Some typical 7705 default values are:
1572 with mode access and encap-type ipcp"
::= { aluRS232ChanGroupEntry 3 }
aluRS232ChanGroupOperMTU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated size of the largest packet which can be sent on
the channel group, specified in octets. For channel groups that
are used for transmitting network datagrams, this is the size of
the largest network datagram that can be sent."
::= { aluRS232ChanGroupEntry 4 }
aluRS232ChanGroupCRC OBJECT-TYPE
SYNTAX INTEGER {
crc16 (1),
crc32 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluRS232ChanGroupCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit
CRC calculation. A value of 'crc32' is a 32-bit CRC
calculation. 32-bit CRC increases the error detection ability,
but it also adds some performance overhead."
DEFVAL { crc32 }
::= { aluRS232ChanGroupEntry 5 }
aluRS232ChanGroupIdleCycleFlags OBJECT-TYPE
SYNTAX TmnxDSXIdleCycleFlags
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232ChanGroupIdleCycleFlags configures the value that the
channel group transmits during idle cycle."
DEFVAL { flags }
::= { aluRS232ChanGroupEntry 6 }
aluRS232ChanGroupPayloadFillType OBJECT-TYPE
SYNTAX TmnxDSXIdleFillType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluRS232ChanGroupPayloadFillType specifies the type of
idle payload fill to be sent when the CEM channel group experiences
an underrun.
If the type is set to 'userDefinedPattern' then the value of
aluRS232ChanGroupPayloadPattern is used to define the payload pattern.
The default value depends on the encap type of the channel group:
For CEM encap - 'allOnes'
For all other encaps - 'notApplicable' "
DEFVAL { notApplicable }
::= { aluRS232ChanGroupEntry 7 }
aluRS232ChanGroupPayloadPattern OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluRS232ChanGroupPayloadPattern specifies the idle
payload
fill pattern when the CEM channel group experiences an underrun and
aluRS232ChanGroupPayloadFillType is set to 'userDefinedPattern'.
The default value depends on the encap type of the channel group:
For CEM encap channel group - 255 (Valid range 0..255)
For non-CEM encap channel group - 0 (Valid range 0..0)."
DEFVAL { 0 }
::= { aluRS232ChanGroupEntry 8 }
--
-- Port Discards Stats Table
--
aluPortDiscardStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortDiscardsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Nokia SAR series port packet discard
statistics table for providing, via SNMP, the capability of
retrieving the detailed packet discard statistics."
::= { aluPortStatsObjs 1 }
aluPortDiscardsStatsEntry OBJECT-TYPE
SYNTAX AluPortDiscardsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluPortDiscardStatsTable. Entries are
created and deleted by the system depending port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluPortDiscardStatsTable 1 }
AluPortDiscardsStatsEntry ::=
SEQUENCE {
aluPortInL2AddrProtoDiscards Counter64,
aluPortInMPLSLabelDiscards Counter64,
aluPortInIPAddrProtoDiscards Counter64,
aluPortInVlanIdDiscards Counter64,
aluPortInHdlcCrcDiscards Counter64,
aluPortOutPortMtuDiscards Counter64,
aluPortInCsmQHiPriDiscards Counter64,
aluPortInCsmQLowPriDiscards Counter64,
aluPortInCsmQFtpPriDiscards Counter64,
aluPortOutCsmQDiscards Counter64,
aluPortInOtherDiscards Counter64,
aluPortOutOtherDiscards Counter64,
aluPortInCsmQMediumPriDiscards Counter64,
aluPortInHardPolicerDiscards Counter64,
aluPortInL2MacDADiscards Counter64,
aluPortInL2ETypeDiscards Counter64
}
aluPortInL2AddrProtoDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInL2AddrProtoDiscards indicates the number of packets discarded
that contained an unsupported type/protocol or unknown address at
layer 2."
::= { aluPortDiscardsStatsEntry 1 }
aluPortInMPLSLabelDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInMPLSLabelDiscards indicates the number of packets discarded that
contained unknown mpls outer tunnels, unknown inner label or more than
two unsupported labels."
::= { aluPortDiscardsStatsEntry 2 }
aluPortInIPAddrProtoDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInIPAddrProtoDiscards indicates the number of packets discarded
that contained an invalid IP address or unsupported IP protocol."
::= { aluPortDiscardsStatsEntry 3 }
aluPortInVlanIdDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInVlanIdDiscards indicates the number of packets discarded
that contained an unknown VLAN Id."
::= { aluPortDiscardsStatsEntry 4 }
aluPortInHdlcCrcDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInHdlcCrcDiscards indicates the number of packets discarded
due to the HDLC frame containing a CRC error.
This statistic is only applicable to interfaces that have an
encapsulation type of PPP-AUTO."
::= { aluPortDiscardsStatsEntry 5 }
aluPortOutPortMtuDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortOutPortMtuDiscards indicates the number of packets discarded
at egress due to the packet exceeding the configured port mtu."
::= { aluPortDiscardsStatsEntry 6 }
aluPortInCsmQHiPriDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInCsmQHiPriDiscards indicates the number of packets discarded
in the Ingress CSM High Priority Queue."
::= { aluPortDiscardsStatsEntry 7 }
aluPortInCsmQLowPriDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInCsmQLowPriDiscards indicates the number of packets discarded
in the Ingress CSM Low Priority Queue."
::= { aluPortDiscardsStatsEntry 8 }
aluPortInCsmQFtpPriDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"aluPortInCsmQFtpPriDiscards indicates the number of packets discarded
in the Ingress CSM Ftp Priority Queue."
::= { aluPortDiscardsStatsEntry 9 }
aluPortOutCsmQDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortOutCsmQDiscards indicates the number of packets discarded
in the Egress CSM Queue."
::= { aluPortDiscardsStatsEntry 10 }
aluPortInOtherDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInOtherDiscards indicates the number of packets discarded
at ingress for other reasons during processing."
::= { aluPortDiscardsStatsEntry 11 }
aluPortOutOtherDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortOutOtherDiscards indicates the number of packets discarded
at egress for other reasons during processing."
::= { aluPortDiscardsStatsEntry 12 }
aluPortInCsmQMediumPriDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInCsmQMediumPriDiscards indicates the number of packets discarded
in the Ingress CSM Medium Priority Queue."
::= { aluPortDiscardsStatsEntry 13 }
aluPortInHardPolicerDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInHardPolicerDiscards indicates the number of packets discarded
by the ingress hard policer."
::= { aluPortDiscardsStatsEntry 14 }
aluPortInL2MacDADiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInL2MacDADiscards indicates the number of packets discarded
that contained an unknown Mac DA."
::= { aluPortDiscardsStatsEntry 15 }
aluPortInL2ETypeDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortInL2MacDADiscards indicates the number of packets discarded
that contained an unknown Ethertype."
::= { aluPortDiscardsStatsEntry 16 }
--
-- Port ACR Clock Stats Table
--
aluPortAcrClkStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortAcrClkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Nokia SAR series port adaptive clock
recovery (ACR) statistics table for providing, via SNMP, the
capability of retrieving statistical information relating
to clock that is derived from the ACR CPIPE PW."
::= { aluPortStatsObjs 2 }
aluPortAcrClkStatsEntry OBJECT-TYPE
SYNTAX AluPortAcrClkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluPortAcrClkStatsTable. Entries are
created and deleted by the system depending port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluPortAcrClkStatsTable 1 }
AluPortAcrClkStatsEntry ::=
SEQUENCE {
aluLastUpdateTime TimeStamp,
aluTotalMinutesIn24Hour Unsigned32,
aluCurrent24HourFreqOffsetMeanPpb Integer32,
aluCurrent24HourFreqOffsetStdDevPpb Unsigned32,
aluMaxShortIntervalMinutes Unsigned32,
aluTotalShortIntervalMinutes Unsigned32,
aluCurrent1MinValidData TruthValue,
aluCurrent1MinPhaseErrorMeanPpb Integer32,
aluCurrent1MinPhaseErrorStdDevNs Unsigned32,
aluCurrent1MinPhaseErrorMeanNs Integer32,
aluCurrent1MinFreqOffsetMeanPpb Integer32,
aluCurrent1MinFreqOffsetStdDevPpb Unsigned32
}
aluLastUpdateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time the ACR statistics were updated"
::= { aluPortAcrClkStatsEntry 1 }
aluTotalMinutesIn24Hour OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of minutes in alu24HourFreqOffsetMeanPpb
and alu24HourFreqOffsetStdDevPpb"
::= { aluPortAcrClkStatsEntry 2 }
aluCurrent24HourFreqOffsetMeanPpb OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluCurrent24HourFreqOffsetMeanPpb indicates the mean frequency offset
from the local oscillator clock in parts per billion for up to the
last 24 hour."
::= { aluPortAcrClkStatsEntry 3 }
aluCurrent24HourFreqOffsetStdDevPpb OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluCurrent24HourFreqOffsetStdDevPpb indicates the standard deviation of the
frequency offset from the local oscillator clock in parts per billion
for up to the last 24 hour."
::= { aluPortAcrClkStatsEntry 4 }
aluMaxShortIntervalMinutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluMaxShortIntervalMinutes the maximum number of aluIntervalNumber."
::= { aluPortAcrClkStatsEntry 5 }
aluTotalShortIntervalMinutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluTotalShortIntervalMinutes is the number of aluIntervalNumber
that have valid statistics"
::= { aluPortAcrClkStatsEntry 6 }
aluCurrent1MinValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for the first
interval is valid."
::= { aluPortAcrClkStatsEntry 7 }
aluCurrent1MinPhaseErrorMeanPpb OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean phase error from the local oscillator clock
in parts per billion during the first interval."
::= { aluPortAcrClkStatsEntry 8 }
aluCurrent1MinPhaseErrorStdDevNs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard deviation of the phase error from the local
oscillator clock in nano seconds during the first interval."
::= { aluPortAcrClkStatsEntry 9 }
aluCurrent1MinPhaseErrorMeanNs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean of the phase error from the local
oscillator clock in nano seconds during the first interval."
::= { aluPortAcrClkStatsEntry 10 }
aluCurrent1MinFreqOffsetMeanPpb OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean frequency offset from the local oscillator clock
in parts per billion during the first interval."
::= { aluPortAcrClkStatsEntry 11 }
aluCurrent1MinFreqOffsetStdDevPpb OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard deviation of the frequency offset from the
local oscillator clock in nano seconds during the first interval."
::= { aluPortAcrClkStatsEntry 12 }
--
-- Port ACR Clock Stats Short Interval Table
--
aluPortAcrClkStatsShortIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortAcrClkStatsShortIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port ACR Clock Interval Table contains various
statistics collected by each adaptively timed port
over the previous 15 minutes. The past 15 minutes are
broken into 15 1 minute intervals. Each
row in this table represents one such interval
(identified by aluAcrClkIntervalNumber)."
::= { aluPortStatsObjs 3 }
aluPortAcrClkStatsShortIntervalEntry OBJECT-TYPE
SYNTAX AluPortAcrClkStatsShortIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Port ACR Clock Interval table."
INDEX { tmnxChassisIndex, tmnxPortPortID, aluIntervalNumber}
::= { aluPortAcrClkStatsShortIntervalTable 1 }
AluPortAcrClkStatsShortIntervalEntry ::=
SEQUENCE {
aluIntervalNumber INTEGER,
aluIntervalValidData TruthValue,
aluIntervalUpdateTime TimeStamp,
aluIntervalPhaseErrorMeanPpb Integer32,
aluIntervalPhaseErrorStdDevNs Unsigned32,
aluIntervalPhaseErrorMeanNs Integer32,
aluIntervalFreqOffsetMeanPpb Integer32,
aluIntervalFreqOffsetStdDevPpb Unsigned32
}
aluIntervalNumber OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number between 1 and 15, where 1 is the most
recently completed 1 minute interval and 15 is
the 1 minutes interval completed 14 minutes prior
to interval 1."
::= { aluPortAcrClkStatsShortIntervalEntry 1 }
aluIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interval is valid."
::= { aluPortAcrClkStatsShortIntervalEntry 2 }
aluIntervalUpdateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The update time of the ACR interval statistics"
::= { aluPortAcrClkStatsShortIntervalEntry 3 }
aluIntervalPhaseErrorMeanPpb OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean phase error from the local oscillator clock
in parts per billion during the interval."
::= { aluPortAcrClkStatsShortIntervalEntry 4 }
aluIntervalPhaseErrorStdDevNs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard deviation of the phase error from the local
oscillator clock in nano seconds during the interval."
::= { aluPortAcrClkStatsShortIntervalEntry 5 }
aluIntervalPhaseErrorMeanNs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean of the phase error from the local
oscillator clock in nano seconds during the interval."
::= { aluPortAcrClkStatsShortIntervalEntry 6 }
aluIntervalFreqOffsetMeanPpb OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean frequency offset from the local oscillator clock
in parts per billion during the interval."
::= { aluPortAcrClkStatsShortIntervalEntry 7 }
aluIntervalFreqOffsetStdDevPpb OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard deviation of the frequency offset from the
local oscillator clock in nano seconds during the interval."
::= { aluPortAcrClkStatsShortIntervalEntry 8 }
--
-- Network Port Ingress Control Stats Table
--
aluPortNetIngressControlStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortNetIngressControlStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Nokia SAR series port ingress control statistics
table for providing, via SNMP, the capability of retrieving the ingress
control traffic statistics for ports in network or hybrid modes.
This table is not applicable to ports in access mode."
::= { aluPortStatsObjs 4 }
aluPortNetIngressControlStatsEntry OBJECT-TYPE
SYNTAX AluPortNetIngressControlStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluPortNetIngressControlStatsTable. Entries are
created and deleted by the system depending port configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluPortNetIngressControlStatsTable 1 }
AluPortNetIngressControlStatsEntry ::=
SEQUENCE {
aluPortNetIngressControlFwdPkts Counter64,
aluPortNetIngressControlFwdOcts Counter64,
aluPortNetIngressControlDroPkts Counter64,
aluPortNetIngressControlDroOcts Counter64
}
aluPortNetIngressControlFwdPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetIngressControlFwdPkts indicates the number of
ingress control packets forwarded on this port."
::= { aluPortNetIngressControlStatsEntry 1 }
aluPortNetIngressControlFwdOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetIngressControlFwdOcts indicates the number of
ingress control octets forwarded on this port."
::= { aluPortNetIngressControlStatsEntry 2 }
aluPortNetIngressControlDroPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetIngressControlDroPkts indicates the number of
ingress control packets dropped on this port."
::= { aluPortNetIngressControlStatsEntry 3 }
aluPortNetIngressControlDroOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetIngressControlDroOcts indicates the number of
ingress control octets dropped on this port."
::= { aluPortNetIngressControlStatsEntry 4 }
--
-- Network Port Egress Control Stats Table
--
aluPortNetEgressControlStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortNetEgressControlStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Nokia SAR series port egress control statistics
table for providing, via SNMP, the capability of retrieving the egress
control traffic statistics for ports in network or hybrid modes."
::= { aluPortStatsObjs 5 }
aluPortNetEgressControlStatsEntry OBJECT-TYPE
SYNTAX AluPortNetEgressControlStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluPortNetEgressControlStatsTable. Entries are
created and deleted by the system depending port configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluPortNetEgressControlStatsTable 1 }
AluPortNetEgressControlStatsEntry ::=
SEQUENCE {
aluPortNetEgressControlFwdPkts Counter64,
aluPortNetEgressControlFwdOcts Counter64,
aluPortNetEgressControlDroPkts Counter64,
aluPortNetEgressControlDroOcts Counter64
}
aluPortNetEgressControlFwdPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetEgressControlFwdPkts indicates the number of
egress control packets forwarded on this port."
::= { aluPortNetEgressControlStatsEntry 1 }
aluPortNetEgressControlFwdOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetEgressControlFwdOcts indicates the number of
egress control octets forwarded on this port."
::= { aluPortNetEgressControlStatsEntry 2 }
aluPortNetEgressControlDroPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetEgressControlDroPkts indicates the number of
egress control packets dropped on this port."
::= { aluPortNetEgressControlStatsEntry 3 }
aluPortNetEgressControlDroOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetEgressControlDroOcts indicates the number of
egress control octets dropped on this port."
::= { aluPortNetEgressControlStatsEntry 4 }
--
-- ALU GPON Port Current Interval Stats Table
--
aluGponPortCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluGponPortCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluGponPortCurrentTable contains various
statistics being collected from the ONT for the current 15
minute interval."
::= { aluPortStatsObjs 6 }
aluGponPortCurrentEntry OBJECT-TYPE
SYNTAX AluGponPortCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluGponPortCurrentTable. Entries
are created and deleted by the system depending on port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluGponPortCurrentTable 1 }
AluGponPortCurrentEntry ::=
SEQUENCE {
aluGponPortCurrentLastUpdTime TimeStamp,
aluGponPortCurrentPMEnabled TruthValue,
aluGponPortCurrentTxFrames Counter32,
aluGponPortCurrentRxFrames Counter32,
aluGponPortCurrentTxBytes Counter32,
aluGponPortCurrentRxBytes Counter32,
aluGponPortCurrentDropFrsUp Counter32,
aluGponPortCurrentDropFrsDn Counter32,
aluGponPortCurrentTxFrsMcast Counter32,
aluGponPortCurrentRxFrsMcast Counter32,
aluGponPortCurrentFCSEs Counter32,
aluGponPortCurrentECs Counter32,
aluGponPortCurrentLCs Counter32,
aluGponPortCurrentFTLs Counter32,
aluGponPortCurrentRBOs Counter32,
aluGponPortCurrentTBOs Counter32,
aluGponPortCurrentSCFs Counter32,
aluGponPortCurrentMCFs Counter32,
aluGponPortCurrentSQEs Counter32,
aluGponPortCurrentDTs Counter32,
aluGponPortCurrentIMTEs Counter32,
aluGponPortCurrentCSEs Counter32,
aluGponPortCurrentAEs Counter32,
aluGponPortCurrentIMREs Counter32,
aluGponPortCurrentLostFragsDn Counter32,
aluGponPortCurrentLostFragsUp Counter32,
aluGponPortCurrentRxFrags Counter32,
aluGponPortCurrentRxBlocks Counter32,
aluGponPortCurrentTxBlocks Counter32,
aluGponPortCurrentTxFrags Counter32,
aluGponPortCurrentBadHeaders Counter32
}
aluGponPortCurrentLastUpdTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time at which this data was collected."
::= { aluGponPortCurrentEntry 1 }
aluGponPortCurrentPMEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not PM Collection has been enabled on the ONT."
::= { aluGponPortCurrentEntry 2 }
aluGponPortCurrentTxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted Ethernet Frames. "
::= { aluGponPortCurrentEntry 3 }
aluGponPortCurrentRxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received Ethernet Frames. "
::= { aluGponPortCurrentEntry 4 }
aluGponPortCurrentTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted Ethernet Bytes. "
::= { aluGponPortCurrentEntry 5 }
aluGponPortCurrentRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received Ethernet Bytes. "
::= { aluGponPortCurrentEntry 6 }
aluGponPortCurrentDropFrsUp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Dropped Frames Upstream. "
::= { aluGponPortCurrentEntry 7 }
aluGponPortCurrentDropFrsDn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Dropped Frames Downstream. "
::= { aluGponPortCurrentEntry 8 }
aluGponPortCurrentTxFrsMcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted Multicast Ethernet Frames. "
::= { aluGponPortCurrentEntry 9 }
aluGponPortCurrentRxFrsMcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received Multicast Ethernet Frames. "
::= { aluGponPortCurrentEntry 10 }
aluGponPortCurrentFCSEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Frame Check Sequence(FCS)Errors."
::= { aluGponPortCurrentEntry 11 }
aluGponPortCurrentECs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Excessive Collisions."
::= { aluGponPortCurrentEntry 12 }
aluGponPortCurrentLCs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Late Collisions."
::= { aluGponPortCurrentEntry 13 }
aluGponPortCurrentFTLs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Frames that are Too Long."
::= { aluGponPortCurrentEntry 14 }
aluGponPortCurrentRBOs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Receive Buffer Overflows."
::= { aluGponPortCurrentEntry 15 }
aluGponPortCurrentTBOs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmit Buffer Overflows."
::= { aluGponPortCurrentEntry 16 }
aluGponPortCurrentSCFs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted
Single Collision Frames."
::= { aluGponPortCurrentEntry 17 }
aluGponPortCurrentMCFs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted
Multiple Collision Frames."
::= { aluGponPortCurrentEntry 18 }
aluGponPortCurrentSQEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of SQE Test Error messages generated."
::= { aluGponPortCurrentEntry 19 }
aluGponPortCurrentDTs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames delayed due to Deferred
Transmission."
::= { aluGponPortCurrentEntry 20 }
aluGponPortCurrentIMTEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of unsuccessfully transmitted frames
due to Internal MAC Transmit Error."
::= { aluGponPortCurrentEntry 21 }
aluGponPortCurrentCSEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Carrier Sense Errors."
::= { aluGponPortCurrentEntry 22 }
aluGponPortCurrentAEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames having Alignment Errors."
::= { aluGponPortCurrentEntry 23 }
aluGponPortCurrentIMREs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of unsuccessfully received frames
due to Internal MAC Receive Error."
::= { aluGponPortCurrentEntry 24 }
aluGponPortCurrentLostFragsDn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Lost GEM Fragments (downstream). "
::= { aluGponPortCurrentEntry 25 }
aluGponPortCurrentLostFragsUp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Lost GEM Fragments (upstream). "
::= { aluGponPortCurrentEntry 26 }
aluGponPortCurrentRxFrags OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received GEM Fragments. "
::= { aluGponPortCurrentEntry 27 }
aluGponPortCurrentRxBlocks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received GEM Blocks. "
::= { aluGponPortCurrentEntry 28 }
aluGponPortCurrentTxBlocks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted GEM Blocks. "
::= { aluGponPortCurrentEntry 29 }
aluGponPortCurrentTxFrags OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted GEM Fragments. "
::= { aluGponPortCurrentEntry 30 }
aluGponPortCurrentBadHeaders OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received GEM Headers that are bad. "
::= { aluGponPortCurrentEntry 31 }
--
-- ALU GPON Port Previous Interval Stats Table
--
aluGponPortPreviousTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluGponPortPreviousEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluGponPortPreviousTable contains various
statistics that were collected during the previous 15 minute
interval."
::= { aluPortStatsObjs 7 }
aluGponPortPreviousEntry OBJECT-TYPE
SYNTAX AluGponPortPreviousEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluGponPortPreviousTable. Entries
are created and deleted by the system depending on port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluGponPortPreviousTable 1 }
AluGponPortPreviousEntry ::=
SEQUENCE {
aluGponPortPreviousLastUpdTime TimeStamp,
aluGponPortPreviousPMEnabled TruthValue,
aluGponPortPreviousTxFrames Counter32,
aluGponPortPreviousRxFrames Counter32,
aluGponPortPreviousTxBytes Counter32,
aluGponPortPreviousRxBytes Counter32,
aluGponPortPreviousDropFrsUp Counter32,
aluGponPortPreviousDropFrsDn Counter32,
aluGponPortPreviousTxFrsMcast Counter32,
aluGponPortPreviousRxFrsMcast Counter32,
aluGponPortPreviousFCSEs Counter32,
aluGponPortPreviousECs Counter32,
aluGponPortPreviousLCs Counter32,
aluGponPortPreviousFTLs Counter32,
aluGponPortPreviousRBOs Counter32,
aluGponPortPreviousTBOs Counter32,
aluGponPortPreviousSCFs Counter32,
aluGponPortPreviousMCFs Counter32,
aluGponPortPreviousSQEs Counter32,
aluGponPortPreviousDTs Counter32,
aluGponPortPreviousIMTEs Counter32,
aluGponPortPreviousCSEs Counter32,
aluGponPortPreviousAEs Counter32,
aluGponPortPreviousIMREs Counter32,
aluGponPortPreviousLostFragsDn Counter32,
aluGponPortPreviousLostFragsUp Counter32,
aluGponPortPreviousRxFrags Counter32,
aluGponPortPreviousRxBlocks Counter32,
aluGponPortPreviousTxBlocks Counter32,
aluGponPortPreviousTxFrags Counter32,
aluGponPortPreviousBadHeaders Counter32
}
aluGponPortPreviousLastUpdTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time at which this data was collected."
::= { aluGponPortPreviousEntry 1 }
aluGponPortPreviousPMEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not PM Collection has been enabled on the ONT."
::= { aluGponPortPreviousEntry 2 }
aluGponPortPreviousTxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted Ethernet Frames. "
::= { aluGponPortPreviousEntry 3 }
aluGponPortPreviousRxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received Ethernet Frames. "
::= { aluGponPortPreviousEntry 4 }
aluGponPortPreviousTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted Ethernet Bytes. "
::= { aluGponPortPreviousEntry 5 }
aluGponPortPreviousRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received Ethernet Bytes. "
::= { aluGponPortPreviousEntry 6 }
aluGponPortPreviousDropFrsUp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Dropped Frames Upstream. "
::= { aluGponPortPreviousEntry 7 }
aluGponPortPreviousDropFrsDn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Dropped Frames Downstream. "
::= { aluGponPortPreviousEntry 8 }
aluGponPortPreviousTxFrsMcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted Multicast Ethernet Frames. "
::= { aluGponPortPreviousEntry 9 }
aluGponPortPreviousRxFrsMcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received Multicast Ethernet Frames. "
::= { aluGponPortPreviousEntry 10 }
aluGponPortPreviousFCSEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Frame Check Sequence(FCS)Errors."
::= { aluGponPortPreviousEntry 11 }
aluGponPortPreviousECs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Excessive Collisions."
::= { aluGponPortPreviousEntry 12 }
aluGponPortPreviousLCs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Late Collisions."
::= { aluGponPortPreviousEntry 13 }
aluGponPortPreviousFTLs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Frames that are Too Long."
::= { aluGponPortPreviousEntry 14 }
aluGponPortPreviousRBOs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Receive Buffer Overflows."
::= { aluGponPortPreviousEntry 15 }
aluGponPortPreviousTBOs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmit Buffer Overflows."
::= { aluGponPortPreviousEntry 16 }
aluGponPortPreviousSCFs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted
Single Collision Frames."
::= { aluGponPortPreviousEntry 17 }
aluGponPortPreviousMCFs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted
Multiple Collision Frames."
::= { aluGponPortPreviousEntry 18 }
aluGponPortPreviousSQEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of SQE Test Error messages generated."
::= { aluGponPortPreviousEntry 19 }
aluGponPortPreviousDTs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames delayed due to Deferred
Transmission."
::= { aluGponPortPreviousEntry 20 }
aluGponPortPreviousIMTEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of unsuccessfully transmitted frames
due to Internal MAC Transmit Error."
::= { aluGponPortPreviousEntry 21 }
aluGponPortPreviousCSEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Carrier Sense Errors."
::= { aluGponPortPreviousEntry 22 }
aluGponPortPreviousAEs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames having Alignment Errors."
::= { aluGponPortPreviousEntry 23 }
aluGponPortPreviousIMREs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of unsuccessfully received frames
due to Internal MAC Receive Error."
::= { aluGponPortPreviousEntry 24 }
aluGponPortPreviousLostFragsDn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Lost GEM Fragments (downstream). "
::= { aluGponPortPreviousEntry 25 }
aluGponPortPreviousLostFragsUp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Lost GEM Fragments (upstream). "
::= { aluGponPortPreviousEntry 26 }
aluGponPortPreviousRxFrags OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received GEM Fragments. "
::= { aluGponPortPreviousEntry 27 }
aluGponPortPreviousRxBlocks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received GEM Blocks. "
::= { aluGponPortPreviousEntry 28 }
aluGponPortPreviousTxBlocks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted GEM Blocks. "
::= { aluGponPortPreviousEntry 29 }
aluGponPortPreviousTxFrags OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Transmitted GEM Fragments. "
::= { aluGponPortPreviousEntry 30 }
aluGponPortPreviousBadHeaders OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Received GEM Headers that are bad. "
::= { aluGponPortPreviousEntry 31 }
--
-- ALU XDSL Line Stats Table
--
aluXdslLineStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluXdslLineStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluXdslLineStatsTable contains various statistics being collected
from the BCM6519 for each physical XDSL line on the 'XDSL'
tmnxPortType port."
::= { aluPortStatsObjs 8 }
aluXdslLineStatsEntry OBJECT-TYPE
SYNTAX AluXdslLineStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluXdslLineStatsTable. Entries
are created and deleted by the system depending on port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID, aluXdslLineID }
::= { aluXdslLineStatsTable 1 }
AluXdslLineStatsEntry ::=
SEQUENCE {
aluXdslLineStatsNearEndFECS Counter64,
aluXdslLineStatsNearEndLOSS Counter64,
aluXdslLineStatsNearEndES Counter64,
aluXdslLineStatsNearEndSES Counter64,
aluXdslLineStatsNearEndUAS Counter64,
aluXdslLineStatsNearEndAS Counter64,
aluXdslLineStatsNearEndLOFS Counter64,
aluXdslLineStatsNearEndLPRS Counter64,
aluXdslLineStatsNearEndLEFTRS Counter64,
aluXdslLineStatsFarEndFECS Counter64,
aluXdslLineStatsFarEndLOSS Counter64,
aluXdslLineStatsFarEndES Counter64,
aluXdslLineStatsFarEndSES Counter64,
aluXdslLineStatsFarEndUAS Counter64,
aluXdslLineStatsFarEndAS Counter64,
aluXdslLineStatsFarEndLOFS Counter64,
aluXdslLineStatsFarEndLPRS Counter64,
aluXdslLineStatsFarEndLEFTRS Counter64,
aluXdslLineStatsUpTime Unsigned32
}
aluXdslLineStatsNearEndFECS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Forward Error Correction Seconds - Near-End:
Count of 1-second intervals with one or more FEC corrections on
either one of the active latencies at the near-end."
::= { aluXdslLineStatsEntry 1 }
aluXdslLineStatsNearEndLOSS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Loss of Signal Seconds - Near-End:
Count of 1-second intervals with one or more LOS defects present at
the near-end."
::= { aluXdslLineStatsEntry 2 }
aluXdslLineStatsNearEndES OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Errored Seconds - Near-End:
Count of 1-second intervals with one or more FEBE anomalies, or 1
or more LOS defects, or one or more RDI defects."
::= { aluXdslLineStatsEntry 3 }
aluXdslLineStatsNearEndSES OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Severely Errored Seconds - Near-End:
Count of 1-second intervals with 18 or more FEBE anomalies, or 1
or more LOS defects, or one or more RDI defects."
::= { aluXdslLineStatsEntry 4 }
aluXdslLineStatsNearEndUAS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Unavailable Seconds - Near-End:
Count of 1-second intervals for which the ADSL line is not
available (the line becomes unavailable at the onset of 10 continuous
SES)."
::= { aluXdslLineStatsEntry 5 }
aluXdslLineStatsNearEndAS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Available Seconds - Near-End:
Count of 1 second intervals for which the ADSL line is available."
::= { aluXdslLineStatsEntry 6 }
aluXdslLineStatsNearEndLOFS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Loss of Framing Seconds - Near-End:
Count of 1-second intervals containing one or more SEF defects at the
near-end."
::= { aluXdslLineStatsEntry 7 }
aluXdslLineStatsNearEndLPRS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Loss of power Seconds - Near-End:
Count of 1-second intervals containing one or more LPR defects at the
near-end."
::= { aluXdslLineStatsEntry 8 }
aluXdslLineStatsNearEndLEFTRS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Low Error-Free Troughtput Rate Seconds - Near-End."
::= { aluXdslLineStatsEntry 9 }
aluXdslLineStatsFarEndFECS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Forward Error Correction Seconds - Far-End:
Count of 1-second intervals with one or more FEC corrections on
either one of the active latencies at the far-end."
::= { aluXdslLineStatsEntry 10 }
aluXdslLineStatsFarEndLOSS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Loss of Signal Seconds - Far-End:
Count of 1-second intervals with one or more LOS defects present at
the far-end."
::= { aluXdslLineStatsEntry 11 }
aluXdslLineStatsFarEndES OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Errored Seconds - Far-End:
Count of 1-second intervals with one or more FEBE anomalies, or 1
or more LOS defects, or one or more RDI defects."
::= { aluXdslLineStatsEntry 12 }
aluXdslLineStatsFarEndSES OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Severely Errored Seconds - Far-End:
Count of 1-second intervals with 18 or more FEBE anomalies, or 1
or more LOS defects, or one or more RDI defects."
::= { aluXdslLineStatsEntry 13 }
aluXdslLineStatsFarEndUAS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Unavailable Seconds - Far-End:
Count of 1-second intervals for which the ADSL line is not
available (the line becomes unavailable at the onset of 10 continuous
SES)."
::= { aluXdslLineStatsEntry 14 }
aluXdslLineStatsFarEndAS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Available Seconds - Far-End:
Count of 1 second intervals for which the ADSL line is available."
::= { aluXdslLineStatsEntry 15 }
aluXdslLineStatsFarEndLOFS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Loss of Framing Seconds - Far-End:
Count of 1-second intervals containing one or more SEF defects at the
far-end."
::= { aluXdslLineStatsEntry 16 }
aluXdslLineStatsFarEndLPRS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Loss of power Seconds - Far-End:
Count of 1-second intervals containing one or more LPR defects at the
far-end."
::= { aluXdslLineStatsEntry 17 }
aluXdslLineStatsFarEndLEFTRS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Low Error-Free Troughtput Rate Seconds - Far-End."
::= { aluXdslLineStatsEntry 18 }
aluXdslLineStatsUpTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of seconds already in showtime."
::= { aluXdslLineStatsEntry 19 }
--
-- ALU SHDSL Line Stats Table
--
aluShdslLineStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluShdslLineStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluShdslLineStatsTable contains the SHDSL Performance
statistics being collected from the Socrate-4e for each
physical SHDSL line on the 'SHDSL' tmnxPortType port."
::= { aluPortStatsObjs 9 }
aluShdslLineStatsEntry OBJECT-TYPE
SYNTAX AluShdslLineStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluShdslLineStatsTable. Entries
are created and deleted by the system depending on port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID, aluShdslLineID}
::= { aluShdslLineStatsTable 1 }
AluShdslLineStatsEntry ::=
SEQUENCE {
aluShdslLineStatsLinkLoss Counter64,
aluShdslLineStatsCVError Counter64,
aluShdslLineStatsES Counter64,
aluShdslLineStatsSES Counter64,
aluShdslLineStatsLOSWS Counter64,
aluShdslLineStatsUAS Counter64,
aluShdslLineStatsInvalidDataFlag INTEGER
}
aluShdslLineStatsLinkLoss OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Loss Counter (Network Side). This counter is only valid for the
local STU-R and is not polled by the STU-C,"
::= { aluShdslLineStatsEntry 2 }
aluShdslLineStatsCVError OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Code Violation Error Counter (Network Side). It is updated every
second when the link is active."
::= { aluShdslLineStatsEntry 4 }
aluShdslLineStatsES OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Erroneous Seconds Counter (Network Side). It is updated every
second when the link is active."
::= { aluShdslLineStatsEntry 5 }
aluShdslLineStatsSES OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely Erroneous Seconds Counter (Network Side). It is updated every
second when the link is active."
::= { aluShdslLineStatsEntry 6 }
aluShdslLineStatsLOSWS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LOSWS Counter (Network Side). It is updated every second when the link
is active."
::= { aluShdslLineStatsEntry 7 }
aluShdslLineStatsUAS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable Seconds Counter (Network Side). It is updated every
second when the link is active."
::= { aluShdslLineStatsEntry 8 }
aluShdslLineStatsInvalidDataFlag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the validity of the PM data. It is set to 0 when the
counters are reliable, otherwise it indicates that the
far-end counters are not reliable."
::= { aluShdslLineStatsEntry 10 }
--
-- Port Control Stats Table
--
aluPortCtlStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortCtlStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Nokia SAR series port control statistics
table for providing, via SNMP, the capability of retrieving the
detailed control packet statistics for ports in access modes.
This table is not applicable to ports in network or hybrid mode."
::= { aluPortStatsObjs 10 }
aluPortCtlStatsEntry OBJECT-TYPE
SYNTAX AluPortCtlStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluPortCtlStatsTable. Entries are
created and deleted by the system depending port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluPortCtlStatsTable 1 }
AluPortCtlStatsEntry ::=
SEQUENCE {
aluPortAccessCtlInFwdPkts Counter64,
aluPortAccessCtlInFwdOcts Counter64,
aluPortAccessCtlInDroPkts Counter64,
aluPortAccessCtlInDroOcts Counter64,
aluPortAccessCtlEgrFwdPkts Counter64,
aluPortAccessCtlEgrFwdOcts Counter64,
aluPortAccessCtlEgrDroPkts Counter64,
aluPortAccessCtlEgrDroOcts Counter64
}
aluPortAccessCtlInFwdPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortAccessCtlInFwdPkts indicates the number of CTL packets
that get forwarded on access port ingress ."
::= { aluPortCtlStatsEntry 1 }
aluPortAccessCtlInFwdOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortAccessCtlInFwdOcts indicates the number of CTL octets
that get forwarded on access port ingress ."
::= { aluPortCtlStatsEntry 2 }
aluPortAccessCtlInDroPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortAccessCtlInDroPkts indicates the number of CTL packets
that get dropped on access port ingress ."
::= { aluPortCtlStatsEntry 3 }
aluPortAccessCtlInDroOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortAccessCtlInDroOcts indicates the number of CTL octets
that get dropped on access port ingress ."
::= { aluPortCtlStatsEntry 4 }
aluPortAccessCtlEgrFwdPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortAccessCtlEgrFwdPkts indicates the number of CTL packets
that get forwarded on access port egress ."
::= { aluPortCtlStatsEntry 5 }
aluPortAccessCtlEgrFwdOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortAccessCtlEgrFwdOcts indicates the number of CTL octets
that get forwarded on access port egress ."
::= { aluPortCtlStatsEntry 6 }
aluPortAccessCtlEgrDroPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortAccessCtlEgrDroPkts indicates the number of CTL packets
that get dropped on access port egress ."
::= { aluPortCtlStatsEntry 7 }
aluPortAccessCtlEgrDroOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortAccessCtlEgrDroOcts indicates the number of CTL octets
that get dropped on access port egress ."
::= { aluPortCtlStatsEntry 8 }
--
-- ALU Voice Port table
--
aluVoicePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluVoicePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluVoicePortTable has an entry for a physical Voice port."
::= { aluPortObjs 7 }
aluVoicePortEntry OBJECT-TYPE
SYNTAX AluVoicePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a physical Voice port on an
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tmnxMDAAssignedType object is
set to a Voice MDA type. The aluVoicePortEntry contains attributes
that are unique to the Voice TmnxPortType. The
tmnxPortPortID contains the slot, mda and port numbers encoded into it.
For each aluVoicePortEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluVoicePortTable 1 }
AluVoicePortEntry ::=
SEQUENCE {
aluVoicePortLastChangeTime TimeStamp,
aluVoicePortType INTEGER,
aluVoicePortAudioWires INTEGER,
aluVoicePortTlpRx AluVoicePortTlp,
aluVoicePortTlpTx AluVoicePortTlp,
aluVoicePortLineBalance INTEGER,
aluVoicePortRingGeneration INTEGER,
aluVoicePortSignalingType INTEGER
}
aluVoicePortLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluVoicePortLastChangeTime contains the sysUpTime value of the most
recently modified writable variable in the aluVoicePortEntry row for
this port."
::= { aluVoicePortEntry 1 }
aluVoicePortType OBJECT-TYPE
SYNTAX INTEGER {
em (1),
fxo (2),
fxs (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoicePortType configures the interface-type of the physical port."
DEFVAL { em }
::= { aluVoicePortEntry 2 }
aluVoicePortAudioWires OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
twoWires (1),
fourWires (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoicePortAudioWires is used to configure the number of audio wires
for a given E&M interface.
This object is valid for em ports only.
twoWires is not allowed when any channel in the port trio is
transmissionOnly. For example, if the channel under port 1 is
transmissionOnly, then ports 1, 2 and port 3 cannot be set to twoWires.
To change aluVoicePortAudioWires, the port must be shutdown.
Changes result in defaulting of aluVoicePortTlpRx and aluVoicePortTlpTx.
"
DEFVAL { fourWires }
::= { aluVoicePortEntry 3 }
aluVoicePortTlpRx OBJECT-TYPE
SYNTAX AluVoicePortTlp
UNITS "tenths of decibels"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoicePortTlpRx is used to configure the receive Transmission Level
Point level for a given voice interface. The receive TLP refers to the
digital-to-analog level.
The valid aluVoicePortTlpRx range for em 'fourWires' mode is -160 to
+70.
The valid aluVoicePortTlpRx range for em 'twoWires' mode is -100 to
+60.
For fxo and fxs ports:
- valid range is -70 to 0 in 1db increments
- default value is -30
To change aluVoicePortTlpRx, the port must be shutdown.
"
DEFVAL { 0 }
::= { aluVoicePortEntry 4 }
aluVoicePortTlpTx OBJECT-TYPE
SYNTAX AluVoicePortTlp
UNITS "tenths of decibels"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoicePortTlpTx is used to configure the transmit Transmission Level
Point level for a given voice interface. The transmit TLP refers to the
analog-to-digital level.
The valid aluVoicePortTlpTx range for em 'fourWires' mode is -160 to
+70.
The valid aluVoicePortTlpTx range for em 'twoWires' mode is -100 to
+60.
For fxo and fxs ports:
- valid range is -40 to +30 in 1db increments
- default value is 0
To change aluVoicePortTlpTx, the port must be shutdown.
"
DEFVAL { 0 }
::= { aluVoicePortEntry 5 }
aluVoicePortLineBalance OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
short (1), -- less than 200 Ohms
long (2), -- greater than 200 Ohms
nominal (3), -- 600 Ohms
eightHundred (4) -- 800 Ohms//(100 Ohms+50nF)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluVoicePortLineBalance specifies the line
balance on a given voice interface.
This object is valid for fxo and fxs ports only.
Valid values for fxo and fxs ports:
nominal (default)
eightHundred
To change aluVoicePortLineBalance, the port must be shutdown.
"
::= { aluVoicePortEntry 6 }
aluVoicePortRingGeneration OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
none (1),
freq16 (2),
freq20 (3),
freq25 (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluVoicePortRingGeneration specifies the
frequency (in Hz) of the generated ring signal.
This object is valid for fxs ports only.
"
DEFVAL { freq16 }
::= { aluVoicePortEntry 7 }
aluVoicePortSignalingType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
privateLineAutomaticRingdown3600 (1), -- 3600PLAR
privateLineAutomaticRingdown1511 (2), -- 1511PLAR
loopStart3600 (3), -- 3600LS
profileOne1511 (4), -- 1511Profile1
remoteExtension3600 (5), -- 3600RE
fifteenElevenSigSel137 (6) -- 1511SN137
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluVoicePortSignalingType specifies how the
signaling leads operate to establish a call.
This object is valid for fxo and fxs ports only.
privateLineAutomaticRingdown3600 - Does not involve exchange.
When subscriber 1 goes off-hook, cadenced ringing occurs at
subscriber 2. Subscriber 2 answers call by going off-hook.
privateLineAutomaticRingdown1511 - same description as for 3600PLAR but
ABCD bits differ
loopStart3600 - Subscriber applies loop current to seize the line.
Central office signals idle throughout the entire call and does not
provide answer supervision.
profileOne1511 - same as 3600LS but ABCD bits differ
remoteExtension3600 - Subscriber seizes the line by closing loop.
Exchange signals idle throughout the entire call and does not
provide answer supervision. Subscriber can apply a recall signal
by connecting the B lead to earth.
fifteenElevenSigSel137 - aka Exchange_transp
Valid values for fxo ports:
loopStart3600 (muLaw only; default)
profileOne1511 ( aLaw only)
remoteExtension3600 ( aLaw only; default)
fifteenElevenSigSel137 ( aLaw only)
Valid values for fxs ports:
privateLineAutomaticRingdown3600
privateLineAutomaticRingdown1511 ( aLaw only)
loopStart3600 (muLaw only; default)
profileOne1511 ( aLaw only)
remoteExtension3600 ( aLaw only; default)
fifteenElevenSigSel137 ( aLaw only)
To change aluVoicePortSignalingType, the port must be shutdown.
"
::= { aluVoicePortEntry 8 }
--
-- ALU Voice table
--
aluVoiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluVoiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"aluVoiceTable has an entry for each Voice channel on an IOM card
in each chassis in the system.
"
::= { aluPortObjs 8 }
aluVoiceEntry OBJECT-TYPE
SYNTAX AluVoiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Voice channel on an IOM card
in a chassis in the system. Channel entries for
voice ports can be created and deleted via SNMP SET operations.
For each aluVoiceEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable.
"
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluVoiceTable 1 }
AluVoiceEntry ::=
SEQUENCE {
aluVoiceRowStatus RowStatus,
aluVoiceLastChangeTime TimeStamp,
aluVoiceType INTEGER,
aluVoiceSignalingMode INTEGER,
aluVoiceLoopback INTEGER,
aluVoiceFaultSignaling INTEGER,
aluVoiceSignalBitsState OCTET STRING,
aluVoiceClockSource TmnxDSXClockSource,
aluVoiceSignalingLeadE AluVoiceSignalingLead,
aluVoiceSignalingLeadM AluVoiceSignalingLead,
aluVoiceSignalingLeadsState OCTET STRING,
aluVoiceSignalMode INTEGER,
aluVoiceCallState INTEGER,
aluVoiceIncomingCallCount Counter32,
aluVoiceIncomingCallCountAns Counter32,
aluVoiceIncomingCallTime Counter32,
aluVoiceIncomingCallTimeAns Counter32,
aluVoiceOutgoingCallCount Counter32,
aluVoiceOutgoingCallCountAns Counter32,
aluVoiceOutgoingCallTime Counter32,
aluVoiceOutgoingCallTimeAns Counter32,
aluVoiceOutOfServiceTime Counter32,
aluVoiceIdleTime Counter32,
aluVoiceTotalCallCount Counter32,
aluVoiceTotalCallTime Counter32,
aluVoiceIdleCode Unsigned32,
aluVoiceSeizedCode Unsigned32
}
aluVoiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoiceRowStatus controls the creation and deletion of
row entries in the aluVoiceTable.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiMOS encoding scheme.
"
::= { aluVoiceEntry 1 }
aluVoiceLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluVoiceLastChangeTime contains the sysUpTime value of the
most recently modified writable variable in the
aluVoiceEntry row for this Voice channel.
"
::= { aluVoiceEntry 2 }
aluVoiceType OBJECT-TYPE
SYNTAX INTEGER {
em (1),
fxo (2),
fxs (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluVoiceType indicates the channel type."
::= { aluVoiceEntry 3 }
aluVoiceSignalingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
em (1),
transmissionOnly (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoiceSignalingMode configures the channel's signaling mode for
E&M or transmission only.
This object is valid for em channels only.
transmissionOnly is not allowed when any port in the port trio is
twoWires. For example, if port 1 is twoWires, then the channels under
ports 1, 2 and 3 cannot be set to transmissionOnly.
aluVoiceSignalingMode is not allowed to differ from other channels in
the port trio. For example, if the channel under port 1 is
transmissionOnly, then the channels under port 2 and port 3 must also
be transmissionOnly.
aluVoiceSignalingMode cannot be changed if a channel-group already
exists for the port.
Changing to em results in defaulting of
aluVoiceFaultSignaling, aluVoiceSignalingLeadE, aluVoiceSignalingLeadM,
aluVoiceIdleCode and aluVoiceSeizedCode.
"
DEFVAL { em }
::= { aluVoiceEntry 4 }
aluVoiceLoopback OBJECT-TYPE
SYNTAX INTEGER {
none (1),
internalAnalog (2),
internalDigital (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoiceLoopback is used to put the port into a loopback mode.
Only internal loopbacks are supported.
'internalAnalog' (aka Loopback B) is located on the analag side of the
CODEC. 'internalDigital' (aka Loopback A) is located on the digital
side of the CODEC.
'internalAnalog' is closer to the line-side than 'internalDigital'.
The value 'internalAnalog' is valid for em channels only.
"
DEFVAL { none }
::= { aluVoiceEntry 5 }
aluVoiceFaultSignaling OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
seized (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoiceFaultSignaling is used to configure fault signaling as idle
or seized.
The idle code is defined by aluVoiceIdleCode.
The seized code is defined by aluVoiceSeizedCode.
This object is invalid for em channels whose aluVoiceSignalingMode is
'transmissionOnly'.
"
DEFVAL { idle }
::= { aluVoiceEntry 6 }
aluVoiceSignalBitsState OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluVoiceSignalBitsState is an array of two bytes used to indicate the
current state of the ABCD signalling bits for the voice channel.
The first byte of the array describes the RX ABCD bits. The second byte
of the array describes the TX ABCD bits.
The byte arrangement is as follows:
array index: | 0 1 |
| RX TX |
Each byte carries ABCD bits in the least significant nibble. The
byte's most significant bit indicates the validity of the ABCD bits.
The bit arrangement is as follows:
bit pos: | 7 6 5 4 3 2 1 0 |
| V x x x A B C D |
'V' - validity (0 = invalid, 1 = valid)
'x' - don't care
ABCD bits are marked invalid for a variety of situations (eg.
channel-group not configured, channel status not up, etc.).
"
::= { aluVoiceEntry 7 }
aluVoiceClockSource OBJECT-TYPE
SYNTAX TmnxDSXClockSource
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluVoiceClockSource indicates the clock for transmitted data from
either the internal clock ('nodeTimed'), or from a clock recovered
from the line's receive data stream ('loopTimed'), or recovered
adaptively from the rate at which the data that is received and not
from the physical layer ('adaptive'), or recovered from the
differential timestamp in the RTP header ('differential').
Only 'nodeTimed' is supported.
"
::= { aluVoiceEntry 8 }
aluVoiceSignalingLeadE OBJECT-TYPE
SYNTAX AluVoiceSignalingLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoiceSignalingLeadE is an output (or drive) lead.
This object is valid for em channels only.
This object is invalid for em channels whose aluVoiceSignalingMode is
'transmissionOnly'.
"
DEFVAL { end-to-end }
::= { aluVoiceEntry 9 }
aluVoiceSignalingLeadM OBJECT-TYPE
SYNTAX AluVoiceSignalingLead
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoiceSignalingLeadM is an input (or scan) lead.
This object is valid for em channels only.
This object is invalid for em channels whose aluVoiceSignalingMode is
'transmissionOnly'.
"
DEFVAL { end-to-end }
::= { aluVoiceEntry 10 }
aluVoiceSignalingLeadsState OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluVoiceSignalingLeadsState is an array of two bytes used to indicate
the current state of the output (or drive) and input (or scan)
signaling leads (AluVoiceSignalingLead).
This object is valid for em channels only.
This object is invalid for em channels whose aluVoiceSignalingMode is
'transmissionOnly'.
The byte arrangement is as follows:
byte array index: | 0 1 |
signaling lead: | M E |
Each byte represents the state of the respective signaling lead.
Valid byte values are:
1 = ON (or high as per AluVoiceSignalingLead)
2 = OFF (or low as per AluVoiceSignalingLead)
All other byte values are undefined.
"
::= { aluVoiceEntry 11 }
aluVoiceSignalMode OBJECT-TYPE
SYNTAX INTEGER {
none (1),
cas (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluVoiceSignalMode indicates the type of signalling
associated with the channel:
none - Indicates no signalling on this channel.
cas - Indicates Channel Associated Signalling (CAS) on this channel.
aluVoiceSignalMode is just like tmnxDS1SignalMode except that it's read-only.
"
::= { aluVoiceEntry 12 }
aluVoiceCallState OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
outOfService (1),
idle (2),
incoming (3),
outgoing (4),
nonForwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the voice circuit."
::= { aluVoiceEntry 13 }
aluVoiceIncomingCallCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming calls (received by the circuit).
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 14 }
aluVoiceIncomingCallCountAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming calls (received by the circuit) that were answered.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 15 }
aluVoiceIncomingCallTime OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total duration (in seconds) of all incoming calls.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 16 }
aluVoiceIncomingCallTimeAns OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total duration (in seconds) of all incoming calls that were answered.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 17 }
aluVoiceOutgoingCallCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing calls (originated by the circuit).
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 18 }
aluVoiceOutgoingCallCountAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing calls (originated by the circuit) that were answered.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 19 }
aluVoiceOutgoingCallTime OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total duration (in seconds) of all outgoing calls.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 20 }
aluVoiceOutgoingCallTimeAns OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total duration (in seconds) of all outgoing calls that were answered.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 21 }
aluVoiceOutOfServiceTime OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in seconds for which the circuit was unavailable for connection.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 22 }
aluVoiceIdleTime OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in seconds for which the circuit was idle.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 23 }
aluVoiceTotalCallCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of aluVoiceIncomingCallCount and aluVoiceOutgoingCallCount.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 24 }
aluVoiceTotalCallTime OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of aluVoiceIncomingCallTime and aluVoiceOutgoingCallTime.
This count is accumulated since the last time the statistics were cleared.
"
::= { aluVoiceEntry 25 }
aluVoiceIdleCode OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the code transmitted on the signaling path when
the channel is configured to transmit idle fault signaling. It's also
used for driving/scanning the E&M signaling leads.
This object is valid for em channels only.
For fxo and fxs, the value is assigned internally by the system.
The object is a bitmap arranged as follows:
bit pos: | 7 6 5 4 3 2 1 0 |
| x x x x A B C D |
'x' - don't care
The default value depends on aluExtTmnxMDAVoiceCompandingLaw:
For muLaw - 0 (or 0x0 or 0b0000)
For aLaw - 13 (or 0xD or 0b1101)
This object is invalid for em channels whose aluVoiceSignalingMode is
'transmissionOnly'.
"
::= { aluVoiceEntry 26 }
aluVoiceSeizedCode OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the code transmitted on the signaling path when
the channel is configured to transmit seized fault signaling. It's also
used for driving/scanning the E&M signaling leads.
This object is valid for em channels only.
For fxo and fxs, the value is assigned internally by the system.
The object is a bitmap arranged as follows:
bit pos: | 7 6 5 4 3 2 1 0 |
| x x x x A B C D |
'x' - don't care
The default value depends on aluExtTmnxMDAVoiceCompandingLaw:
For muLaw - 15 (or 0xF or 0b1111)
For aLaw - 5 (or 0x5 or 0b0101)
This object is invalid for em channels whose aluVoiceSignalingMode is
'transmissionOnly'.
"
::= { aluVoiceEntry 27 }
--
-- Voice Channel Group Table
--
aluVoiceChanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluVoiceChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluVoiceChanGroupTable has an entry for a single 64kbps (DS0)
channel belonging to a particular Voice channel.
"
::= { aluPortObjs 9 }
aluVoiceChanGroupEntry OBJECT-TYPE
SYNTAX AluVoiceChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents one or more Voice channels on an interface.
Entries can be created and deleted via SNMP SET operations
using the aluVoiceChanGroupRowStatus object.
For each aluVoiceChanGroupEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable.
"
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluVoiceChanGroupTable 1 }
AluVoiceChanGroupEntry ::=
SEQUENCE {
aluVoiceChanGroupRowStatus RowStatus,
aluVoiceChanGroupMTU Unsigned32,
aluVoiceChanGroupOperMTU Unsigned32
}
aluVoiceChanGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluVoiceChanGroupRowStatus controls the creation and deletion of
row entries in the aluVoiceChanGroupTable. The tmnxPortPortID
for a channel group includes a group ID in the lower bits.
The manager has to first calculate the tmnxPortPortID based on the
TiMOS encoding scheme."
::= { aluVoiceChanGroupEntry 1 }
aluVoiceChanGroupMTU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest packet which can be sent/received
on the channel group, specified in octets. For groups that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent.
aluVoiceChanGroupMTU cannot be modified as only encap-type cem is
supported. The predetermined default value will always be reflected.
"
::= { aluVoiceChanGroupEntry 2 }
aluVoiceChanGroupOperMTU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated size of the largest packet which can be sent on
the channel group, specified in octets. For channel groups that
are used for transmitting network datagrams, this is the size of
the largest network datagram that can be sent."
::= { aluVoiceChanGroupEntry 3 }
--
-- ALU GPON Port Table
--
aluGponPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluGponPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluGponPortTable has an entry for every GPON port in the system."
::= { aluPortObjs 10 }
aluGponPortEntry OBJECT-TYPE
SYNTAX AluGponPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a physical GPON port on an
IOM card in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Entries in this
table will be created automatically when the
tmnxMDAAssignedType object is set to a GPON MDA type. The
aluGponPortEntry contains attributes that are unique to the
'GPON' tmnxPortType. The tmnxPortPortID contains the slot,
mda and port numbers encoded into it.
For each aluGponPortEntry, there will be a corresponding
entry in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluGponPortTable 1 }
AluGponPortEntry ::=
SEQUENCE {
aluGponPortG984SerialNumber OCTET STRING,
aluGponPortSubsLocId OCTET STRING,
aluGponPortActiveSwVersion OCTET STRING,
aluGponPortPonStatus INTEGER,
aluGponPortOntEnetStatus INTEGER,
aluGponPortOntEnetSpeed INTEGER
}
aluGponPortG984SerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the ONT's G.984 Serial Number of the ONT. From a
display standpoint, it should be interpreted as follows: 1st 4
bytes are ASCII Vendor ID, and 2nd 4 bytes are a 32 bit number
(which gets displayed as 8 ASCII characters). "
::= { aluGponPortEntry 1 }
aluGponPortSubsLocId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Subscriber Location ID (SLID) that is sent to the OLT via
the G.984.3 password PLOAM message. Contains the binary
representation of the 10-byte SLID that will be sent on the
next reboot."
::= { aluGponPortEntry 2 }
aluGponPortActiveSwVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..14))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active software version running on the GPON port's ONT."
::= { aluGponPortEntry 3 }
aluGponPortPonStatus OBJECT-TYPE
SYNTAX INTEGER {
shutdown (0),
active (1),
hardwareFailure (2),
softwareFailure (3),
lossOfLink (4),
softwareDownload (5),
omciNotEstablished (6),
boot (7),
ranging (8),
busy (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluGponPortPonStatus indicates the current status of the
PON."
::= { aluGponPortEntry 4 }
aluGponPortOntEnetStatus OBJECT-TYPE
SYNTAX INTEGER {
noLink (0),
active (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational status of the ONT's Ethernet interface."
::= { aluGponPortEntry 5 }
aluGponPortOntEnetSpeed OBJECT-TYPE
SYNTAX INTEGER {
undefined (0),
halfDuplex10Mbps (1),
fullDuplex10Mbps (2),
halfDuplex100Mbps (3),
fullDuplex100Mbps (4),
halfDuplex1Gbps (5),
fullDuplex1Gbps (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational speed of the ONT's Ethernet interface."
::= { aluGponPortEntry 6 }
--
-- ALU DSL Port Table
--
aluDslPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluDslPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluDslPortTable has an entry for every DSL port in the system."
::= { aluPortObjs 11 }
aluDslPortEntry OBJECT-TYPE
SYNTAX AluDslPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a backplane ethernet DSL port on an
IOM card in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Entries in this
table will be created automatically when the
tmnxMDAAssignedType object is set to a p8-xdsl or p6-dsl MDA type. The
aluDslPortEntry contains attributes that are unique to the
'XDSL' or 'SHDSL' tmnxPortType. The tmnxPortPortID contains the slot,
mda and port numbers encoded into it.
For each aluDslPortEntry, there will be a corresponding
entry in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluDslPortTable 1 }
AluDslPortEntry ::=
SEQUENCE {
aluDslPortBondingType AluDslTpsTcType,
aluDslPortBondingState INTEGER,
aluDslPortBondingBitRateUS Unsigned32,
aluDslPortBondingBitRateDS Unsigned32,
aluDslPortAtmVpi INTEGER,
aluDslPortAtmVci INTEGER,
aluDslPortAtmF5OamLoopback INTEGER,
aluDslPortAtmF5OamLoopbackStatus INTEGER,
aluDslPortAtmF5OamLoopbackTime Unsigned32,
aluDslPortNtrDslLineID INTEGER,
aluDslPortNtrLockedStatus INTEGER,
aluDslPortNtrStdDev Unsigned32,
aluDslPortNtrMaxError INTEGER,
aluDslPortNtrMinError INTEGER,
aluDslPortAdsl2Plus INTEGER,
aluDslPortNtrSampleClockPeriod INTEGER,
aluDslPortNtrErrorHistory OCTET STRING
}
aluDslPortBondingType OBJECT-TYPE
SYNTAX AluDslTpsTcType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortBondingType indicates the bonding type of the DSL port."
::= { aluDslPortEntry 1 }
aluDslPortBondingState OBJECT-TYPE
SYNTAX INTEGER {
down (0),
up (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortBondingState indicates the bonding opretional state of
the DSL port. The 'up' state indicates that the bonding group can
be used for passing traffic."
::= { aluDslPortEntry 2 }
aluDslPortBondingBitRateUS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortBondingBitRateUS indicates the upstream bonding bit
rate, unit is 1Kpbs."
::= { aluDslPortEntry 3 }
aluDslPortBondingBitRateDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortBondingBitRateDS indicates the downstream bonding bit
rate, unit is 1Kpbs."
::= { aluDslPortEntry 4 }
aluDslPortAtmVpi OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aluDslPortAtmVpi indicates the Vpi for the bonding group.
It is only used when the aluDslPortBondingType is 'atm'."
DEFVAL { 8 }
::= { aluDslPortEntry 5 }
aluDslPortAtmVci OBJECT-TYPE
SYNTAX INTEGER (32..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluDslPortAtmVci indicates the Vci for the bonding group.
The minimum value is 32, values 0 to 31 are
reserved for other uses by the ITU and ATM Forum.
It is only used when the aluDslPortBondingType is 'atm'."
DEFVAL { 35 }
::= { aluDslPortEntry 6 }
aluDslPortAtmF5OamLoopback OBJECT-TYPE
SYNTAX INTEGER {
none (0),
active (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluDslPortAtmF5OamLoopback is used to generate an CPE initiated F5
OAM loopback cell on an ATM bonding type DSL port .
The aluDslPortAtmF5OamLoopback always starts in the none(0) state
until an explicit management action causes a transition to the
active(1) state. When active(1), an F5 ATM OAM cell is initiated
and sent to PEER. The state goes back to none when a loopback cell
is received from PEER or a default 10-seconds times out.
When active(1), setting aluDslPortAtmF5OamLoopback to none is not
allowed.
It is applicable only when the aluDslPortBondingType is 'atm'."
DEFVAL { none }
::= { aluDslPortEntry 7 }
aluDslPortAtmF5OamLoopbackStatus OBJECT-TYPE
SYNTAX INTEGER {
none (0),
fail (1),
pass (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluDslPortAtmF5OamLoopbackStatus is used to indicate the F5 loopback
test result.
It is applicable only when the value of tmnxPortType is 'XDSL' and the
aluDslPortBondingType is 'atm'."
DEFVAL { none }
::= { aluDslPortEntry 8 }
aluDslPortAtmF5OamLoopbackTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluDslPortAtmF5OamLoopbackTime is used to indicate the round-trip time
, in ms, for the ATM F5 Loopback testing.
It is applicable only when the value of tmnxPortType is 'XDSL' and the
aluDslPortBondingType is 'atm'."
DEFVAL { 0 }
::= { aluDslPortEntry 9 }
aluDslPortNtrDslLineID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortNtrDslLineID indicates the DSL physical line controlling
the NTR. The value of '0' indicates that the NTR is not available on
the port"
DEFVAL { 0 }
::= { aluDslPortEntry 10 }
aluDslPortNtrLockedStatus OBJECT-TYPE
SYNTAX INTEGER {
acquringLock (0),
preLock (1),
lock (2),
notSelected (3),
freeRunning (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortNtrLockedStatus indicates that NTR status."
DEFVAL { freeRunning }
::= { aluDslPortEntry 11 }
aluDslPortNtrStdDev OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortNtrStdDev indicates the standard deviation, or one
sigma, over a 10 second period of the phase error between the
encoded phase information (as present in the NTR field of
the overhead frame) and the CPE regenerated NTR clock. This
therefore indicates the standard deviation of the phase error
between the CO NTR clock and the CPE regenerated NTR clock.
It is expressed in nanoseconds.
It is applicable only when the value of tmnxPortType is 'XDSL'."
DEFVAL { 0 }
::= { aluDslPortEntry 12 }
aluDslPortNtrMaxError OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortNtrMaxError indicates the maximum phase error, after
lock has been declared, between the encoded phase information
(as present in the NTR field of the overhead frame) and the CPE
regenerated NTR clock. This therefore indicates the maximum phase
error between the CO NTR clock and the CPE regenerated NTR clock.
It is expressed in nanoseconds.
It is applicable only when the value of tmnxPortType is 'XDSL'."
DEFVAL { 0 }
::= { aluDslPortEntry 13 }
aluDslPortNtrMinError OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortNtrMinError indicates the minimum phase error, after
lock has been declared, between the encoded phase information
(as present in the NTR field of the overhead frame) and the CPE
regenerated NTR clock. This therefore indicates the minimum phase
error between the CO NTR clock and the CPE regenerated NTR clock.
It is expressed in nanoseconds.
It is applicable only when the value of tmnxPortType is 'XDSL'."
DEFVAL { 0 }
::= { aluDslPortEntry 14 }
aluDslPortAdsl2Plus OBJECT-TYPE
SYNTAX INTEGER {
g992Dot5a (0),
g992Dot5b (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aluDslPortAdsl2Plus indicates the support of G992.5
Annex A operations which are specific to POTS (g992Dot5a), or
support of G992.5 ISDN operations over ADSL2+ (g992Dot5b).
It is applicable only when the value of tmnxPortType is 'XDSL'."
DEFVAL { g992Dot5a }
::= { aluDslPortEntry 15 }
aluDslPortNtrSampleClockPeriod OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortNtrSampleClockPeriod indicates the sample
clock period for NTR in nanoseconds. This number multiplied by
the aluDslPortNtrErrorHistory value results in the phase error
in nanoseconds between the encoded phase information (as present
in the NTR field of the overhead frame) and the CPE regenerated
NTR clock.
It is applicable only when the value of tmnxPortType is 'XDSL'."
DEFVAL { 0 }
::= { aluDslPortEntry 16 }
aluDslPortNtrErrorHistory OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDslPortNtrErrorHistory is an array of bytes used to
indicate phase error history. Each byte represents the phase
error between the encoded phase information (as present in
the NTR field of the overhead frame) and the CPE regenerated
NTR clock. Therefore each byte indicates the phase error between
the CO NTR clock and the CPE regenerated NTR clock. These values
are expressed in clock ticks based on the
aluDslPortNtrSampleClockPeriod. The time interval between bytes
in this array is 1/16 of a second
It is applicable only when the value of tmnxPortType is 'XDSL'."
::= { aluDslPortEntry 17 }
--
-- ALU XDSL Line Table
--
aluXdslLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluXdslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluXdslLineTable has an entry for every physical XDSL line in the
system."
::= { aluPortObjs 12 }
aluXdslLineEntry OBJECT-TYPE
SYNTAX AluXdslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a physical XDSL line on an
DSL module in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Entries in this
table will be created automatically when the
tmnxMDAAssignedType object is set to a p8-xdsl or p6-dsl MDA type. The
aluXdslLineEntry contains attributes that are unique to the XDSL
physical lines. "
INDEX { tmnxChassisIndex, tmnxPortPortID, aluXdslLineID }
::= { aluXdslLineTable 1 }
AluXdslLineEntry ::=
SEQUENCE {
aluXdslLineID Unsigned32,
aluXdslLineOperState INTEGER,
aluXdslLineState INTEGER,
aluXdslLineProtocol INTEGER,
aluXdslLineVdslProfile INTEGER,
aluXdslLineTpsTcType AluDslTpsTcType,
aluXdslLineInBondingGroup TruthValue,
aluXdslLineBitRateUS Unsigned32,
aluXdslLineSnrMarginUS INTEGER,
aluXdslLineOutputPowerUS INTEGER,
aluXdslLineRefPsdUS INTEGER,
aluXdslLineLoopDelayUS INTEGER,
aluXdslLineFailureUS Unsigned32,
aluXdslLineB0DelayUS Unsigned32,
aluXdslLineB0InpUS Unsigned32,
aluXdslLineBitRateDS Unsigned32,
aluXdslLineSnrMarginDS INTEGER,
aluXdslLineOutputPowerDS INTEGER,
aluXdslLineRefPsdDS INTEGER,
aluXdslLineLoopDelayDS INTEGER,
aluXdslLineFailureDS Unsigned32,
aluXdslLineB0DelayDS Unsigned32,
aluXdslLineB0InpDS Unsigned32,
aluXdslLineAdminState AluDslAdminState
}
aluXdslLineID OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When aluXdslLineID is used in conjunction with tmnxChassisIndex
and tmnxPortPortID, it uniquely identifies a specified
physical XDSL line in the managed system. "
::= { aluXdslLineEntry 1 }
aluXdslLineOperState OBJECT-TYPE
SYNTAX INTEGER {
down (0),
up (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the operational state of the XDSL line. The 'up' state
indicates that the DSL line can be used for passing traffic.
For 'ptm' TPS-TC XDSL line, the aluXdslLineOperState is up when the
line state goes to 'runShow' and the line is in a bonding group.
For 'atm' TPS-TC XDSL line, the aluXdslLineOperState is up when the
line state goes to 'runShow' and the line is also available for
bonding through G.998.1 protocol."
::= { aluXdslLineEntry 2 }
aluXdslLineState OBJECT-TYPE
SYNTAX INTEGER {
idlNcon (0),
idlConf (1),
runActi (2),
runInit (3),
runShow (4),
tstMode (5),
runLdInit (6),
idlLdDone (7),
runShowL2 (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the state of the XDSL line retrieved from BCM6519."
::= { aluXdslLineEntry 3 }
aluXdslLineProtocol OBJECT-TYPE
SYNTAX INTEGER {
none (-1),
proc9921a (0),
proc9921b (1),
proc9921c (2),
proc9922a (3),
proc9922c (4),
proc9921h (5),
proc9921i (6),
proc9932 (7),
proc9912a (8),
proc9912b (9),
proc9923a (16),
proc9923b (17),
proc9923i (18),
proc9923m (19),
proc9923j (20),
proc9924i (21),
proc9923l1 (22),
proc9923l2 (23),
proc9925a (24),
proc9925b (25),
proc9925i (26),
proc9925m (27),
proc9925j (28),
sadsl (29),
ansi (30),
etsi (31),
proc9932v (32),
proc9935 (33)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the protocol of the XDSL line retrieved from BCM6519."
DEFVAL { none }
::= { aluXdslLineEntry 4 }
aluXdslLineVdslProfile OBJECT-TYPE
SYNTAX INTEGER {
none (0),
profile8a (1),
profile8b (2),
profile8c (3),
profile8d (4),
profile12a (5),
profile12b (6),
profile17a (7),
profile30a (8),
unknown (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the VDSL profile of the XDSL line retrieved from BCM6519."
DEFVAL { none }
::= { aluXdslLineEntry 5 }
aluXdslLineTpsTcType OBJECT-TYPE
SYNTAX AluDslTpsTcType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the TPS-TC of the XDSL line retrieved from BCM6519."
::= { aluXdslLineEntry 6 }
aluXdslLineInBondingGroup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates if the line belongs to bonding group on the DSL Port"
::= { aluXdslLineEntry 7 }
aluXdslLineBitRateUS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the upstream line bit rate, unit is 1Kpbs.
It is retrieved from BCM6519."
::= { aluXdslLineEntry 8 }
aluXdslLineSnrMarginUS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the upstream SNR margin (expressed in tenth of dB's).
It is retrieved from BCM6519."
::= { aluXdslLineEntry 9 }
aluXdslLineOutputPowerUS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the upstream transmit power (expressed in tenth of dBm's).
It is retrieved from BCM6519."
::= { aluXdslLineEntry 10 }
aluXdslLineRefPsdUS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the upstream ref psd = nomial PSD - power cutback
(expressed in tenths of dB's). It applies to ADSL ptotocols only.
It is retrieved from BCM6519."
::= { aluXdslLineEntry 11 }
aluXdslLineLoopDelayUS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the current loop group delay, only measured in VDSL.
US: delay as measured on RMSG1 = actual loop delay
DS: delay as measured on R-P-TRAINING1 = residual after application
of timing advance expressed in samples at 35.328MHz.
It is retrieved from BCM6519."
::= { aluXdslLineEntry 12 }
aluXdslLineFailureUS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is bit mask giving the set of current active failure
on the upstream line. The value is retrieved from BCM6519.
A failure is declared when the corresponding defect is active for
more than 2.5 (+ or - 0.5) sec. A failure is cleared when the
corresponding defect is off for at least 10.5 (+ or - 0.5) sec.
The bit index and corresponding failures are:
Bit[1]: Set when unavailable time is counted
Bit[2]: Set when the modem is not in the RUNNING_SHOWTIME state
Bit[6]: Loss of ATM cell or PTM packet delineation, bearer B0
Bit[7]: Loss of ATM cell or PTM packet delineation, bearer B1
Bit[12]: Loss of signal
Bit[13]: Loss of frame
Bit[14]: No ATM cell or PTM packet delineation, bearer B0
Bit[15]: No ATM cell or PTM packet delineation, bearer B1
Bit[18]: Loss of power
Bit[24]: CONFIG_ERROR
Bit[25]: HIGH_BIT_RATE
Bit[26]: COMM_PROBLEM
Bit[27]: NO_PEER_DETECTED
Bit[28]: Set when the loss of margin failure is set (when the SNR
margin drops below the minimum SNR margin for more than 20
consective seconds).
Bit[29]: Set when the line leaves Showtime because the L3 state is
requested by the CO or CPE.
"
::= { aluXdslLineEntry 13 }
aluXdslLineB0DelayUS OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the current delay incurred on the upstream B0 latency
path, expressed in milliseconds. The value is retrieved from BCM6519."
::= { aluXdslLineEntry 14 }
aluXdslLineB0InpUS OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the current INP protection achived on the upstream B0
latency path, Unit is 1/2 symbol. The value is retrieved from
BCM6519."
::= { aluXdslLineEntry 15 }
aluXdslLineBitRateDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the downstream line bit rate, unit is 1Kpbs.
It is retrieved from BCM6519."
::= { aluXdslLineEntry 16 }
aluXdslLineSnrMarginDS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the downstream SNR margin (expressed in tenth of dB's).
It is retrieved from BCM6519."
::= { aluXdslLineEntry 17 }
aluXdslLineOutputPowerDS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the downstream transmit power (expressed in tenth of
dBm's). It is retrieved from BCM6519."
::= { aluXdslLineEntry 18 }
aluXdslLineRefPsdDS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the downstream ref psd = nomial PSD - power cutback
(expressed in tenths of dB's). It applies to ADSL ptotocols only.
It is retrieved from BCM6519."
::= { aluXdslLineEntry 19 }
aluXdslLineLoopDelayDS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the current loop group delay, only measured in VDSL.
US: delay as measured on RMSG1 = actual loop delay
DS: delay as measured on R-P-TRAINING1 = residual after application
of timing advance expressed in samples at 35.328MHz.
It is retrieved from BCM6519."
::= { aluXdslLineEntry 20 }
aluXdslLineFailureDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is bit mask giving the set of current active failure
on the downstream line. The value is retrieved from BCM6519.
A failure is declared when the corresponding defect is active for
more than 2.5 (+ or - 0.5) sec. A failure is cleared when the
corresponding defect is off for at least 10.5 (+ or - 0.5) sec. The
bit index and corresponding failures are:
Bit[1]: Set when unavailable time is counted
Bit[2]: Set when the modem is not in the RUNNING_SHOWTIME state
Bit[6]: Loss of ATM cell or PTM packet delineation, bearer B0
Bit[7]: Loss of ATM cell or PTM packet delineation, bearer B1
Bit[12]: Loss of signal
Bit[13]: Loss of frame
Bit[14]: No ATM cell or PTM packet delineation, bearer B0
Bit[15]: No ATM cell or PTM packet delineation, bearer B1
Bit[18]: Loss of power
Bit[24]: CONFIG_ERROR
Bit[25]: HIGH_BIT_RATE
Bit[26]: COMM_PROBLEM
Bit[27]: NO_PEER_DETECTED
Bit[28]: Set when the loss of margin failure is set (when the SNR
margin drops below the the minimum SNR margin for more than 20
consective seconds).
Bit[29]: Set when the line leaves Showtime because the L3 state is
requested by the CO or CPE.
"
::= { aluXdslLineEntry 21 }
aluXdslLineB0DelayDS OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the current delay incurred on the downstream B0 latency
path, expressed in milliseconds. The value is retrieved from BCM6519."
::= { aluXdslLineEntry 22 }
aluXdslLineB0InpDS OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the current INP protection achived on the downstream B0
latency path, Unit is 1/2 symbol. The value is retrieved from
BCM6519."
::= { aluXdslLineEntry 23 }
aluXdslLineAdminState OBJECT-TYPE
SYNTAX AluDslAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates the desired administrative status of this DSL Line"
DEFVAL { inService }
::= { aluXdslLineEntry 24 }
--
-- ALU SHDSL Line Status Table
--
aluShdslLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluShdslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluShdslLineTable has an entry for every SHDSL line in the system."
::= { aluPortObjs 13 }
aluShdslLineEntry OBJECT-TYPE
SYNTAX AluShdslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a physical SHDSL line on an
DSL module in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Entries in this
table will be created automatically when the
tmnxMDAAssignedType object is set to a p6-dsl MDA type. The
aluShdslLineEntry contains attributes that are unique to the SHDSL
physical lines. "
INDEX { tmnxChassisIndex, tmnxPortPortID, aluShdslLineID }
::= { aluShdslLineTable 1 }
AluShdslLineEntry ::=
SEQUENCE {
aluShdslLineID Unsigned32,
aluShdslLineDataRate Unsigned32,
aluShdslLineState INTEGER,
aluShdslLineNegotiatedConst INTEGER,
aluShdslLineUsedCaplist INTEGER,
aluShdslLineRegion INTEGER,
aluShdslLineCaplistMode INTEGER,
aluShdslLineTpsTcType AluDslTpsTcType,
aluShdslLineInBondingGroup TruthValue,
aluShdslLineAdminState AluDslAdminState,
aluShdslLineLineAttenuation Unsigned32,
aluShdslLineRxSNRMargin INTEGER,
aluShdslLinePowerBackOffValue Unsigned32
}
aluShdslLineID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When aluShdslLineID is used in conjunction with tmnxChassisIndex and
tmnxPortPortID, it uniquely identifies a SHDSL line in the managed
system."
::= { aluShdslLineEntry 1 }
aluShdslLineDataRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current data rate of the PMD in units of 1kbs
Note: This parameter is only valid if link is in UP_DATA_MODE."
::= { aluShdslLineEntry 2 }
aluShdslLineState OBJECT-TYPE
SYNTAX INTEGER {
downNotReady (0),
downReady (1),
stopDownReady (2),
initializing (3),
upDateMode (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current state"
::= { aluShdslLineEntry 3 }
aluShdslLineNegotiatedConst OBJECT-TYPE
SYNTAX INTEGER {
pmd16TcPAM (0),
pmd32TcPAM (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Negotiated Constellation.
Note: This parameter is only valid if link is in UP_DATA_MODE."
::= { aluShdslLineEntry 4 }
aluShdslLineUsedCaplist OBJECT-TYPE
SYNTAX INTEGER {
newStyleCapList (0),
oldStyleCapList (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Negotiated Constellation.
Note: This parameter is only valid if link is in UP_DATA_MODE."
::= { aluShdslLineEntry 5 }
aluShdslLineRegion OBJECT-TYPE
SYNTAX INTEGER {
annexAF (0),
annexBG (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Region Information
Note: This parameter is only valid if link is in UP_DATA_MODE."
::= { aluShdslLineEntry 6 }
aluShdslLineCaplistMode OBJECT-TYPE
SYNTAX INTEGER {
newStyleCapList (0),
oldStyleCapList (1),
autoCapList (2),
autoTcDetect (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Capability List Mode."
::= { aluShdslLineEntry 7 }
aluShdslLineTpsTcType OBJECT-TYPE
SYNTAX AluDslTpsTcType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates the TPS-TC of the physical SHDSL line."
::= { aluShdslLineEntry 8 }
aluShdslLineInBondingGroup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates if the line belongs to bonding group on the DSL Port"
::= { aluShdslLineEntry 9 }
aluShdslLineAdminState OBJECT-TYPE
SYNTAX AluDslAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates the desired administrative status of this DSL Line"
DEFVAL { inService }
::= { aluShdslLineEntry 10 }
aluShdslLineLineAttenuation OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Line Attenuation in dB (Network Side).
The local STU-R value is updated every second when the link is active."
::= { aluShdslLineEntry 11 }
aluShdslLineRxSNRMargin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX SNR Margin (Network Side). The local STU-R value is updated
every second when the link is active."
::= { aluShdslLineEntry 12 }
aluShdslLinePowerBackOffValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power Back-Off Value (Network Side). The local STU-R value in dB
is updated every second when the link is active."
::= { aluShdslLineEntry 13 }
--
-- Nokia 7705 Frame-relay Interface Stats Table
--
-- Augmententation of tmnxFrIntfTable in TIMETRA-PORT-MIB
--
aluFrIfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluFrIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table is used to gather the additional statistics for
Nokia 7705 SAR series devices on a particular
frame relay Interface."
::= { aluPortStatsObjs 11 }
aluFrIfStatsEntry OBJECT-TYPE
SYNTAX AluFrIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics collected on a single frame relay
Interface."
AUGMENTS { tmnxFrIntfEntry }
::= { aluFrIfStatsTable 1 }
AluFrIfStatsEntry ::=
SEQUENCE {
aluFrIfRxFrames Counter64,
aluFrIfRxOctets Counter64,
aluFrIfRxDEFrames Counter64,
aluFrIfRxDEOctets Counter64,
aluFrIfRxFECNFrames Counter64,
aluFrIfRxBECNFrames Counter64,
aluFrIfTxFrames Counter64,
aluFrIfTxOctets Counter64,
aluFrIfTxDEFrames Counter64,
aluFrIfTxDEOctets Counter64,
aluFrIfTxFECNFrames Counter64,
aluFrIfTxBECNFrames Counter64,
aluFrIfRxDiscardsInvalidDlci Counter64,
aluFrIfRxLastInvalidDlci Counter64,
aluFrIfRxDiscardsCrcErrors Counter64,
aluFrIfRxDiscardsAlignmentErrors Counter64,
aluFrIfRxDiscardsLengthViolations Counter64,
aluFrIfRxDiscardsIllegalHeader Counter64,
aluFrIfRxDiscardsOtherErrors Counter64,
aluFrIfTxDiscardsUnderruns Counter64,
aluFrIfTxDiscardsOtherErrors Counter64
}
aluFrIfRxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this interface"
::= { aluFrIfStatsEntry 1 }
aluFrIfRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received on this interface"
::= { aluFrIfStatsEntry 2 }
aluFrIfRxDEFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DE=1 frames received on this interface"
::= { aluFrIfStatsEntry 3 }
aluFrIfRxDEOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DE=1 octets received on this interface"
::= { aluFrIfStatsEntry 4 }
aluFrIfRxFECNFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FECN frames received on this interface"
::= { aluFrIfStatsEntry 5 }
aluFrIfRxBECNFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BECN frames received on this interface"
::= { aluFrIfStatsEntry 6 }
aluFrIfTxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames sent on this interface"
::= { aluFrIfStatsEntry 7 }
aluFrIfTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent on this interface"
::= { aluFrIfStatsEntry 8 }
aluFrIfTxDEFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DE=1 frames sent on this interface"
::= { aluFrIfStatsEntry 9 }
aluFrIfTxDEOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DE=1 octets sent on this interface"
::= { aluFrIfStatsEntry 10 }
aluFrIfTxFECNFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FECN frames sent on this interface"
::= { aluFrIfStatsEntry 11 }
aluFrIfTxBECNFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BECN frames sent on this interface"
::= { aluFrIfStatsEntry 12 }
aluFrIfRxDiscardsInvalidDlci OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frames with invalid or unsupported DLCI."
::= { aluFrIfStatsEntry 13 }
aluFrIfRxLastInvalidDlci OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DLCI of the last received frames with an invalid DLCI."
::= { aluFrIfStatsEntry 14 }
aluFrIfRxDiscardsCrcErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received crc errors."
::= { aluFrIfStatsEntry 15 }
aluFrIfRxDiscardsAlignmentErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received alignment errors."
::= { aluFrIfStatsEntry 16 }
aluFrIfRxDiscardsLengthViolations OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received length errors."
::= { aluFrIfStatsEntry 17 }
aluFrIfRxDiscardsIllegalHeader OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received frames with illegal header "
::= { aluFrIfStatsEntry 18 }
aluFrIfRxDiscardsOtherErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The other received errors"
::= { aluFrIfStatsEntry 19 }
aluFrIfTxDiscardsUnderruns OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Underruns."
::= { aluFrIfStatsEntry 20 }
aluFrIfTxDiscardsOtherErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The other transmit errors"
::= { aluFrIfStatsEntry 21 }
--
-- Nokia 7705 Frame-relay Circuit Table
--
-- Augmententation of frCircuitTable in FRAME-RELAY-DTE-MIB
--
--
aluExtFrCircuitTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluExtFrCircuitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing stats information about specific Data
Link Connections (DLC) or virtual circuits."
::= { aluPortStatsObjs 12 }
aluExtFrCircuitEntry OBJECT-TYPE
SYNTAX AluExtFrCircuitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The stats information regarding a single Data Link
Connection."
AUGMENTS { frCircuitEntry }
::= { aluExtFrCircuitTable 1 }
AluExtFrCircuitEntry ::=
SEQUENCE {
aluExtFrCircuitReceivedCrcDiscards Counter32,
aluExtFrCircuitReceivedAborts Counter32,
aluExtFrCircuitReceivedOtherDiscards Counter32,
aluExtFrCircuitSentAborts Counter32,
aluExtFrCircuitSentFECNs Counter32,
aluExtFrCircuitSentBECNs Counter32,
aluExtFrCircuitReceivedDEOctets Counter32,
aluExtFrCircuitSentDEOctets Counter32
}
aluExtFrCircuitReceivedCrcDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound frames dropped because of Crc
errors."
::= { aluExtFrCircuitEntry 1 }
aluExtFrCircuitReceivedAborts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound frames dropped due to insufficient buffer resource."
::= { aluExtFrCircuitEntry 2 }
aluExtFrCircuitReceivedOtherDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound frames dropped because of other
errors."
::= { aluExtFrCircuitEntry 3 }
aluExtFrCircuitSentAborts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound frames dropped because of format
errors, or because the VC is inactive."
::= { aluExtFrCircuitEntry 4 }
aluExtFrCircuitSentFECNs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of frames sent to the network indicating
forward congestion since the virtual circuit was
created. This occurs when transmission queue is congested or
when frames sent with FECN flage set."
::= { aluExtFrCircuitEntry 5 }
aluExtFrCircuitSentBECNs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of frames sent to the network indicating
backward congestion since the virtual circuit was
created. This occurs when frames sent with
FECN flags set."
::= { aluExtFrCircuitEntry 6 }
aluExtFrCircuitReceivedDEOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received from the network indicating
that they were eligible for discard since the virtual
circuit was created. This occurs when the remote DTE
sets the DE flag, or when in remote DTE's switch
detects that the frame was received as Excess Burst
data."
::= { aluExtFrCircuitEntry 7 }
aluExtFrCircuitSentDEOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets sent to the network indicating that
they were eligible for discard since the virtual
circuit was created. This occurs when the local DTE
sets the DE flag, indicating that during Network
congestion situations those frames should be discarded
in preference of other frames sent without the DE bit
set."
::= { aluExtFrCircuitEntry 8 }
--
-- Port PTP Transparent Clock Packet Statistics Table
--
aluEthPtpTimestampStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluEthPtpTimestampStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Nokia SAR series port IEEE1588 PTP
Transparent Clock packet statistics table for providing,
via SNMP, the capability of retrieving statistical information
relating to packets that are timestamped."
::= { aluPortStatsObjs 13 }
aluEthPtpTimestampStatsEntry OBJECT-TYPE
SYNTAX AluEthPtpTimestampStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluEthPtpTimestampStatsTable. Entries are
created and deleted by the system depending port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluEthPtpTimestampStatsTable 1 }
AluEthPtpTimestampStatsEntry ::=
SEQUENCE {
aluEthPtpInSyncPktTimestamped Counter64,
aluEthPtpOutSyncPktTimestamped Counter64,
aluEthPtpInDelReqPktTimestamped Counter64,
aluEthPtpOutDelReqPktTimestamped Counter64,
aluEthPtpInFcsErrorCount Counter64,
aluEthPtpOutFcsErrorCount Counter64,
aluEthPtpOutFollowUpPktTimestamped Counter64
}
aluEthPtpInSyncPktTimestamped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the number of ingress Sync packets that have been
timestamped."
::= { aluEthPtpTimestampStatsEntry 1 }
aluEthPtpOutSyncPktTimestamped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the number of egress Sync packets that have been
timestamped."
::= { aluEthPtpTimestampStatsEntry 2 }
aluEthPtpInDelReqPktTimestamped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the number of ingress Delay Request packets that have been
timestamped."
::= { aluEthPtpTimestampStatsEntry 3 }
aluEthPtpOutDelReqPktTimestamped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the number of egress Delay Request packets that have been
timestamped."
::= { aluEthPtpTimestampStatsEntry 4 }
aluEthPtpInFcsErrorCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicate the number of ingress packets that contained FCS Error."
::= { aluEthPtpTimestampStatsEntry 5 }
aluEthPtpOutFcsErrorCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicate the number of egress packets that contained FCS Error."
::= { aluEthPtpTimestampStatsEntry 6 }
aluEthPtpOutFollowUpPktTimestamped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the number of egress Follow-Up packets that have been
transmitted."
::= { aluEthPtpTimestampStatsEntry 7 }
--
-- Add-drop Network Ring Port Stats Table
--
aluPortNetRingAddDropStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortNetRingAddDropStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Nokia 7705 series network add-drop ring port
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the ring add-drop port queues."
::= { aluPortStatsObjs 14 }
aluPortNetRingAddDropStatsEntry OBJECT-TYPE
SYNTAX AluPortNetRingAddDropStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluPortNetRingAddDropStatsTable. Entries are
created and deleted by the system depending on the add-drop port queue policy
being used at the specific port."
INDEX { tmnxChassisIndex, tmnxPortPortID, aluPortNetRingAddDropQueueIndex }
::= { aluPortNetRingAddDropStatsTable 1 }
AluPortNetRingAddDropStatsEntry ::=
SEQUENCE {
aluPortNetRingAddDropQueueIndex TQueueId,
aluPortNetRingAddDropFwdInProfPkts Counter64,
aluPortNetRingAddDropFwdOutProfPkts Counter64,
aluPortNetRingAddDropFwdInProfOcts Counter64,
aluPortNetRingAddDropFwdOutProfOcts Counter64,
aluPortNetRingAddDropDroInProfPkts Counter64,
aluPortNetRingAddDropDroOutProfPkts Counter64,
aluPortNetRingAddDropDroInProfOcts Counter64,
aluPortNetRingAddDropDroOutProfOcts Counter64
}
aluPortNetRingAddDropQueueIndex OBJECT-TYPE
SYNTAX TQueueId (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"aluPortNetRingAddDropQueueIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely
identifies a network ring add-drop queue for the specified port in the
managed system."
::= { aluPortNetRingAddDropStatsEntry 1 }
aluPortNetRingAddDropFwdInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetRingAddDropFwdInProfPkts indicates the number of conforming
network add-drop packets forwarded on this port using this queue."
::= { aluPortNetRingAddDropStatsEntry 2 }
aluPortNetRingAddDropFwdOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetRingAddDropFwdOutProfPkts indicates the number of exceeding
network add-drop packets forwarded on this port using this queue."
::= { aluPortNetRingAddDropStatsEntry 3 }
aluPortNetRingAddDropFwdInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetRingAddDropFwdInProfOcts indicates the number of conforming
network add-drop octets forwarded on this port using this queue."
::= { aluPortNetRingAddDropStatsEntry 4 }
aluPortNetRingAddDropFwdOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetRingAddDropFwdOutProfOcts indicates the number of exceeding
network add-drop octets forwarded on this port using this queue."
::= { aluPortNetRingAddDropStatsEntry 5 }
aluPortNetRingAddDropDroInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetRingAddDropDroInProfPkts indicates the number of conforming
network add-drop packets dropped on this port using this queue."
::= { aluPortNetRingAddDropStatsEntry 6 }
aluPortNetRingAddDropDroOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetRingAddDropDroOutProfPkts indicates the number of exceeding
network add-drop packets dropped on this port using this queue."
::= { aluPortNetRingAddDropStatsEntry 7 }
aluPortNetRingAddDropDroInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetRingAddDropDroInProfOcts indicates the number of conforming
network add-drop octets dropped on this port using this queue."
::= { aluPortNetRingAddDropStatsEntry 8 }
aluPortNetRingAddDropDroOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPortNetRingAddDropDroOutProfOcts indicates the number of exceeding
network add-drop octets dropped on this port using this queue."
::= { aluPortNetRingAddDropStatsEntry 9 }
aluPortNgeL2KeygroupStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortNgeL2KeygroupStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Nokia 7705 series Network Group Encryption port-level
statistics."
::= { aluPortStatsObjs 15 }
aluPortNgeL2KeygroupStatsEntry OBJECT-TYPE
SYNTAX AluPortNgeL2KeygroupStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the aluPortNgeL2KeygroupStatsTable. Entries are
created and deleted by the system depending port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluPortNgeL2KeygroupStatsTable 1 }
AluPortNgeL2KeygroupStatsEntry ::=
SEQUENCE {
aluPortNgeL2KeygroupTxFrames Counter64,
aluPortNgeL2KeygroupTxBytes Counter64,
aluPortNgeL2KeygroupRxFrames Counter64,
aluPortNgeL2KeygroupRxBytes Counter64,
aluPortNgeL2KGRxDropOtherFrames Counter64,
aluPortNgeL2KGRxDropOtherBytes Counter64,
aluPortNgeL2KeygroupTxDropFrames Counter64,
aluPortNgeL2KeygroupTxDropBytes Counter64,
aluPortNgeL2KGRxDrpInvldSpiFrms Counter64,
aluPortNgeL2KGRxDrpInvldSpiBytes Counter64
}
aluPortNgeL2KeygroupTxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of egress Ethernet frames that
have been encrypted."
::= { aluPortNgeL2KeygroupStatsEntry 1 }
aluPortNgeL2KeygroupTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of egress Ethernet bytes that
have been encrypted."
::= { aluPortNgeL2KeygroupStatsEntry 2 }
aluPortNgeL2KeygroupRxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of ingress Ethernet frames that
have been decrypted."
::= { aluPortNgeL2KeygroupStatsEntry 3 }
aluPortNgeL2KeygroupRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of ingress Ethernet bytes that
have been decrypted."
::= { aluPortNgeL2KeygroupStatsEntry 4 }
aluPortNgeL2KGRxDropOtherFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of ingress Ethernet frames that
have been dropped."
::= { aluPortNgeL2KeygroupStatsEntry 5 }
aluPortNgeL2KGRxDropOtherBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of ingress Ethernet bytes that
have been dropped."
::= { aluPortNgeL2KeygroupStatsEntry 6 }
aluPortNgeL2KeygroupTxDropFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of egress Ethernet frames that
have been dropped."
::= { aluPortNgeL2KeygroupStatsEntry 7 }
aluPortNgeL2KeygroupTxDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of egress Ethernet bytes that
have been dropped."
::= { aluPortNgeL2KeygroupStatsEntry 8 }
aluPortNgeL2KGRxDrpInvldSpiFrms OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of ingress Ethernet frames that
have been dropped due to invalid SPI."
::= { aluPortNgeL2KeygroupStatsEntry 9 }
aluPortNgeL2KGRxDrpInvldSpiBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of ingress Ethernet bytes that
have been dropped due to invalid SPI."
::= { aluPortNgeL2KeygroupStatsEntry 10 }
aluRS232SocketStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluRS232SocketStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluRS232SocketStatsTable contains an entry for each Serial socket
channel that exists in the system. Each row contains traffic and event
counters."
::= { aluPortStatsObjs 16 }
aluRS232SocketStatsEntry OBJECT-TYPE
SYNTAX AluRS232SocketStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the aluRS232SocketStatsTable. Entries are
created and deleted by the system depending on the port
configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluRS232SocketStatsTable 1 }
AluRS232SocketStatsEntry ::=
SEQUENCE {
aluRS232SocketRxChars Counter64,
aluRS232SocketTxChars Counter64,
aluRS232SocketEopIdleTimeoutCnt Counter64,
aluRS232SocketEopLengthCnt Counter64,
aluRS232SocketEopSpecialCharCnt Counter64,
aluRS232SocketIngrForwardedPkts Counter64,
aluRS232SocketEgrForwardedPkts Counter64,
aluRS232SocketIngrDroppedPkts Counter64,
aluRS232SocketEgrDroppedPkts Counter64,
aluRS232SocketSquelchCnt Counter32
}
aluRS232SocketRxChars OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketRxChars indicates the number of
characters received from the Serial data stream."
::= { aluRS232SocketStatsEntry 1 }
aluRS232SocketTxChars OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketTxChars indicates the number of
characters transmitted to the Serial data stream."
::= { aluRS232SocketStatsEntry 2 }
aluRS232SocketEopIdleTimeoutCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketEopIdleTimeoutCnt indicates the
number of times an end of packet event occurred due to idle timeout."
::= { aluRS232SocketStatsEntry 3 }
aluRS232SocketEopLengthCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketEopLengthCnt indicates the
number of times an end of packet event occurred due to length."
::= { aluRS232SocketStatsEntry 4 }
aluRS232SocketEopSpecialCharCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketEopSpecialCharCnt indicates the
number of times an end of packet event occurred due to special
character."
::= { aluRS232SocketStatsEntry 5 }
aluRS232SocketIngrForwardedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketIngrForwardedPkts indicates the
number of packets (constructed from the incoming Serial data stream)
that were successfully forwarded."
::= { aluRS232SocketStatsEntry 6 }
aluRS232SocketEgrForwardedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketIngrForwardedPkts indicates the
number of packets (destined for the outgoing Serial data stream)
that were successfully forwarded."
::= { aluRS232SocketStatsEntry 7 }
aluRS232SocketIngrDroppedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketIngrDroppedPkts indicates the
number of packets (constructed from the incoming Serial data stream)
that were dropped due to errors."
::= { aluRS232SocketStatsEntry 8 }
aluRS232SocketEgrDroppedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketEgrDroppedPkts indicates the
number of packets (destined for the outgoing Serial data stream)
that were dropped due to errors."
::= { aluRS232SocketStatsEntry 9 }
aluRS232SocketSquelchCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketSquelchCnt indicates the
number of times squelch has been activated."
::= { aluRS232SocketStatsEntry 10 }
--
-- ALU Data Port table
--
aluDataPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluDataPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluDataPortTable has an entry for a physical Data port."
::= { aluPortObjs 14 }
aluDataPortEntry OBJECT-TYPE
SYNTAX AluDataPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a physical Data port on an IOM card in a
chassis in the system. Entries cannot be created and deleted via SNMP
SET operations. Entries in this table will be created automatically
when the tmnxMDAAssignedType object is set to a Data MDA type. The
aluDataPortEntry contains attributes that are unique to the Data
TmnxPortType. The tmnxPortPortID contains the slot, mda and port
numbers encoded into it.
For each aluDataPortEntry, there will be a corresponding entry in the
tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluDataPortTable 1 }
AluDataPortEntry ::=
SEQUENCE {
aluDataPortLastChangeTime TimeStamp,
aluDataPortType INTEGER
}
aluDataPortLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluDataPortLastChangeTime indicates the
sysUpTime of the most recently modified writable variable in the
aluDataPortEntry row for this port.
"
::= { aluDataPortEntry 1 }
aluDataPortType OBJECT-TYPE
SYNTAX INTEGER {
codir (1),
tpif (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluDataPortType specifies the interface-type of
the physical port.
"
DEFVAL { codir }
::= { aluDataPortEntry 2 }
--
-- ALU Data table
--
aluDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"aluDataTable has an entry for each Data channel on an IOM card
in each chassis in the system.
"
::= { aluPortObjs 15 }
aluDataEntry OBJECT-TYPE
SYNTAX AluDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Data channel on an IOM card
in a chassis in the system. Channel entries for
Data ports can be created and deleted via SNMP SET operations.
For each aluDataEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable.
"
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluDataTable 1 }
AluDataEntry ::=
SEQUENCE {
aluDataRowStatus RowStatus,
aluDataLastChangeTime TimeStamp,
aluDataType INTEGER,
aluDataClockSource TmnxDSXClockSource,
aluDataTiming8k TmnxEnabledDisabled,
aluDataReportAlarm AluDataReportStatus,
aluDataReportAlarmStatus AluDataReportStatus,
aluDataLoopback INTEGER
}
aluDataRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluDataRowStatus controls the creation and deletion of
row entries in the aluDataTable.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiMOS encoding scheme.
"
::= { aluDataEntry 1 }
aluDataLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluDataLastChangeTime indicates the sysUpTime
of the most recently modified writable variable in the aluDataEntry row
for this Data channel.
"
::= { aluDataEntry 2 }
aluDataType OBJECT-TYPE
SYNTAX INTEGER {
codir (1),
tpif (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluDataType indicates the channel type."
::= { aluDataEntry 3 }
aluDataClockSource OBJECT-TYPE
SYNTAX TmnxDSXClockSource
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluDataClockSource indicates the clock for transmitted data from
either the internal clock ('nodeTimed'), or from a clock recovered
from the line's receive data stream ('loopTimed'), or recovered
adaptively from the rate at which the data that is received and not
from the physical layer ('adaptive'), or recovered from the
differential timestamp in the RTP header ('differential').
Only 'nodeTimed' is supported.
"
::= { aluDataEntry 4 }
aluDataTiming8k OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluDataTiming8k specifies whether to generate
the 8k timing signal while the channel's service is NOT operational.
This object is valid for codir channels only.
"
DEFVAL { disabled }
::= { aluDataEntry 5 }
aluDataReportAlarm OBJECT-TYPE
SYNTAX AluDataReportStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluDataReportAlarm determines when and if to
generate aluEqPortDataAlarm and aluEqPortDataAlarmClear
notifications for this channel.
Valid bits for codir ports:
ais (default)
los (default)
Valid bits for tpif ports:
los (default)
rai (default)
"
::= { aluDataEntry 6 }
aluDataReportAlarmStatus OBJECT-TYPE
SYNTAX AluDataReportStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluDataReportAlarmStatus indicates the current
alarms on this channel."
::= { aluDataEntry 7 }
aluDataLoopback OBJECT-TYPE
SYNTAX INTEGER {
none (1),
internal (2),
line (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluDataLoopback specifies the loopback mode of
the Data interface.
An 'internal' loopback loops frames from the local system back at the
framer.
A 'line' loopback loops frames received on this port back to the remote
system.
"
DEFVAL { none }
::= { aluDataEntry 8 }
--
-- Data Channel Group Table
--
aluDataChanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluDataChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluDataChanGroupTable has an entry for 64kbps (DS0) channels
grouped together and belonging to a particular Data channel."
::= { aluPortObjs 16 }
aluDataChanGroupEntry OBJECT-TYPE
SYNTAX AluDataChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents one or more Data channels on an interface.
Entries can be created and deleted via SNMP SET operations
using the aluDataChanGroupRowStatus object.
For each aluDataChanGroupEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable.
"
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluDataChanGroupTable 1 }
AluDataChanGroupEntry ::=
SEQUENCE {
aluDataChanGroupRowStatus RowStatus,
aluDataChanGroupLastChangeTime TimeStamp,
aluDataChanGroupMTU Unsigned32,
aluDataChanGroupOperMTU Unsigned32,
aluDataChanGroupPayloadFillType TmnxDSXIdleFillType,
aluDataChanGroupPayloadPattern Unsigned32,
aluDataChanGroupTimeSlots TmnxDs0ChannelList
}
aluDataChanGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluDataChanGroupRowStatus controls the creation and deletion of
row entries in the aluDataChanGroupTable. The tmnxPortPortID
for a channel group includes a group ID in the lower bits.
The manager has to first calculate the tmnxPortPortID based on the
TiMOS encoding scheme."
::= { aluDataChanGroupEntry 1 }
aluDataChanGroupLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluDataChanGroupLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
aluDataChanGroupEntry row for this channel group."
::= { aluDataChanGroupEntry 2 }
aluDataChanGroupMTU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest packet which can be sent/received
on the channel group, specified in octets. For groups that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent.
aluDataChanGroupMTU cannot be modified as only encap-type cem is
supported. The predetermined default value will always be reflected.
"
::= { aluDataChanGroupEntry 3 }
aluDataChanGroupOperMTU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated size of the largest packet which can be sent on
the channel group, specified in octets. For channel groups that
are used for transmitting network datagrams, this is the size of
the largest network datagram that can be sent."
::= { aluDataChanGroupEntry 4 }
aluDataChanGroupPayloadFillType OBJECT-TYPE
SYNTAX TmnxDSXIdleFillType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluDataChanGroupPayloadFillType specifies the type of
idle payload fill to be sent when the CEM channel group experiences
an underrun.
This object is valid for codir channels only.
If the type is set to 'userDefinedPattern' then the value of
aluDataChanGroupPayloadPattern is used to define the payload pattern.
The default value depends on the encap type of the channel group:
For CEM encap - 'allOnes'
For all other encaps - 'notApplicable' "
DEFVAL { notApplicable }
::= { aluDataChanGroupEntry 5 }
aluDataChanGroupPayloadPattern OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluDataChanGroupPayloadPattern specifies the idle
payload
fill pattern when the CEM channel group experiences an underrun and
aluDataChanGroupPayloadFillType is set to 'userDefinedPattern'.
This object is valid for codir channels only.
The default value depends on the encap type of the channel group:
For CEM encap channel group - 255 (Valid range 0..255)
For non-CEM encap channel group - 0 (Valid range 0..0)."
DEFVAL { 0 }
::= { aluDataChanGroupEntry 6 }
aluDataChanGroupTimeSlots OBJECT-TYPE
SYNTAX TmnxDs0ChannelList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluDataChanGroupTimeSlots is a bitmap which is used to
add/remove DS0 timeslots from a channel group.
The description for TmnxDs0ChannelList contains details of the
bitmap organization.
This object specifies the number of CONSECUTIVE timeslot(s) to be
associated with the channel group. The value must start from the
first timeslot. The value represents line bandwidth (N x 64kbps).
For codir, the value cannot be changed from the first timeslot.
For tpif, the value can range from 1 to 12 timeslots.
The default value is the first timeslot, 0x00000001."
::= { aluDataChanGroupEntry 7 }
--
-- ALU Extensions of tmnxDS0ChanGroupTable
--
aluExtTmnxDS0ChanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluExtTmnxDS0ChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluExtTmnxDS0ChanGroupTable has an entry for DS0 channels
grouped together and belonging to a particular DS0/E1 channel"
::= { aluPortObjs 17 }
aluExtTmnxDS0ChanGroupEntry OBJECT-TYPE
SYNTAX AluExtTmnxDS0ChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents the extended functionality of a DS0 channel
group.
Entries cannot be created and deleted via SNMP SET operations.
It will be automatically created or deleted when an tmnxDS0ChanGroupEntry
is created/deleted."
AUGMENTS { tmnxDS0ChanGroupEntry }
::= { aluExtTmnxDS0ChanGroupTable 1 }
AluExtTmnxDS0ChanGroupEntry ::=
SEQUENCE {
aluExtDS0ChanGroupSignalMode INTEGER,
aluExtDS0ChanGroupLoopback INTEGER
}
aluExtDS0ChanGroupSignalMode OBJECT-TYPE
SYNTAX INTEGER {
none (1),
cas (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluExtDS0ChanGroupSignalMode indicates the type of signalling
associated with the channel:
none - Indicates no signalling on this channel.
cas - Indicates Channel Associated Signalling (CAS) on this channel.
The default signalling is 'none'. "
DEFVAL { none }
::= { aluExtTmnxDS0ChanGroupEntry 1 }
aluExtDS0ChanGroupLoopback OBJECT-TYPE
SYNTAX INTEGER {
none (0),
line (1),
internal (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluExtDS0ChanGroupLoopback specifies the type of loopback
applied to the DS0 channel group. The value of tmnxPortAdminStatus
should be set to 'outOfService' prior to applying loopback.
none - no loopback applied
line - loops ingress traffic back to the remote system
internal - loops egress traffic back to the local system
"
DEFVAL { none }
::= { aluExtTmnxDS0ChanGroupEntry 2 }
--
-- ALU Extensions of pethPsePortTable
--
aluExtPethPsePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluExtPethPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluExtPethPsePortTable has an entry for a table of objects
that display and control the power characteristics of power Ethernet
ports on a Power Source Entity (PSE) device."
::= { aluPortObjs 18 }
aluExtPethPsePortEntry OBJECT-TYPE
SYNTAX AluExtPethPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents the extended functionality of a power Ethernet
port"
AUGMENTS { pethPsePortEntry }
::= { aluExtPethPsePortTable 1 }
AluExtPethPsePortEntry ::=
SEQUENCE {
aluExtPethPsePortFaultReason INTEGER,
aluExtPethPsePortPowerLevel INTEGER,
aluExtPethPsePortPowerConsumption Unsigned32,
aluExtPethPsePortMaximumPower Unsigned32
}
aluExtPethPsePortFaultReason OBJECT-TYPE
SYNTAX INTEGER {
none (1),
dcp (2),
hicap (3),
rlow (4),
detok (5),
rhigh (6),
open (7),
dcn (8),
tstart (9),
icv (10),
tcut (11),
dis (12),
sup (13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason for a detection status failure:
none (1)
dcp (2) - Positive DC supply connected at the port
hicap (3) - High Capacitance at the port
rlow (4) - Low Resistance at the port
detok (5) - detection ok
rhigh (6) - High resistance at the port
open (7) - open circuit
dcn (8) - Low impedence to Vee at the port
tstart (9) - Startup failure at the port
icv (10) - Current limit disconnect timeout at the port
tcut (11) - Overcurrent and current limit violation at the port
dis (12) - DC load disconnect
sup (13) - Supply fault at the PSE device"
DEFVAL { none }
::= { aluExtPethPsePortEntry 1 }
aluExtPethPsePortPowerLevel OBJECT-TYPE
SYNTAX INTEGER {
none (1),
standard (2),
plus (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"none (1) The interface does not provide the power ethernet function.
standard (2) The interface provides the standard power ethernet power level.
plus (3) The interface provides the higher power 'Poe Plus' PSE function"
DEFVAL { plus }
::= { aluExtPethPsePortEntry 2 }
aluExtPethPsePortPowerConsumption OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power consumption of the port expressed in milliwatts."
::= { aluExtPethPsePortEntry 3 }
aluExtPethPsePortMaximumPower OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum power available to the port expressed in milliwatts."
::= { aluExtPethPsePortEntry 4 }
--
-- ALU Extensions of Tmnx Port table
--
aluExtPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluExtTmnxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluExtPortTable has an entry for port in the chassis."
::= { aluPortObjs 19 }
aluExtTmnxPortEntry OBJECT-TYPE
SYNTAX AluExtTmnxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents extended functionality of a port on
Nokia 7705 SAR devices. Entries cannot be created or
deleted via SNMP SET operations. Entries in this table will be
created or deleted automatically when entries in the
tmnxPortTable are created or deleted."
AUGMENTS { tmnxPortEntry }
::= { aluExtPortTable 1 }
AluExtTmnxPortEntry ::=
SEQUENCE {
aluExtPortSsmTxQualityLevel INTEGER
}
aluExtPortSsmTxQualityLevel OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
prs (1),
stu (2),
st2 (3),
tnc (4),
st3e (5),
st3 (6),
smc (7),
st4 (8),
dus (9),
prc (10),
ssua (11),
ssub (12),
sec (13),
dnu (14),
inv (15),
pno (16),
eec1 (17),
eec2 (18),
failed (19)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortSsmTxQualityLevel indicates the SSM quality level
of transmitted SSM messages. On ports not supporting SSM, or not
transmitting SSM messages, the quality level will be 'unknown (0)'.
The values 'prs (1)' through 'dus (9)' and 'pno (16)' correspond to
quality levels defined in GR-253-CORE. The values 'prc (10)' through
'inv (15)' correspond to quality levels defined in G.781.
The values 'eec1 (17)' and 'eec2 (18)' correspond to quality levels
defines in G.8264."
REFERENCE
"Bellcore (Telcordia Technologies) GR-253-CORE, Issue 3, September 2000,
5.4.2.
ITU-T Recommendation G.781, June 1999.
ITU-T Recommendation G.8264, October 2008."
DEFVAL { unknown }
::= { aluExtTmnxPortEntry 1 }
--
-- ALU Scada Bridge table
--
aluScadaBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluScadaBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluScadaBridgeTable has an entry for a Scada Bridge."
::= { aluPortObjs 20 }
aluScadaBridgeEntry OBJECT-TYPE
SYNTAX AluScadaBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Scada bridge
in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tmnxMDAAssignedType object is
set to the SCADA MDA type. The aluScadaBridgeEntry contains attributes
that are unique to the Scada bridge. The
port ID contains the slot, mda and bridge id(1-10) encoded into it."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluScadaBridgeTable 1 }
AluScadaBridgeEntry ::=
SEQUENCE {
aluScadaBridgeType INTEGER,
aluScadaBridgeAdminStatus INTEGER,
aluScadaBridgeOperStatus INTEGER,
aluScadaBridgeDescription TItemLongDescription,
aluScadaBridgeName TNamedItemOrEmpty
}
aluScadaBridgeType OBJECT-TYPE
SYNTAX INTEGER {
mddb (1),
pcm (2),
vcb (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluScadaBridgeType indicates the type of the
scada bridge.
Due to FPGA limitations, all scada bridges on a SCADA card must
be the same type. The type is determined by the mda mode,
aluExtTmnxMDACapabilityMode."
::= { aluScadaBridgeEntry 1 }
aluScadaBridgeAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
outOfService (0),
inService (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"aluScadaBridgeAdminStatus indicates the admin status of the scada bridge"
::= { aluScadaBridgeEntry 2 }
aluScadaBridgeOperStatus OBJECT-TYPE
SYNTAX INTEGER {
outOfService (0),
inService (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluScadaBridgeOperStatus indicates the operational status of the scada bridge"
::= { aluScadaBridgeEntry 3 }
aluScadaBridgeDescription OBJECT-TYPE
SYNTAX TItemLongDescription
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual string containing user supplied information about the
scada bridge."
DEFVAL { ''H }
::= { aluScadaBridgeEntry 4 }
aluScadaBridgeName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in commands
entered at the device's `console'. This might be a text
name, such as `1/1/1'."
::= { aluScadaBridgeEntry 5 }
--
-- ALU Serial MDDB table
--
aluSerialMddbTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluSerialMddbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"aluSerialMddbTable has an entry for each Serial
MDDB port on each IOM card in each chassis in the system."
::= { aluPortObjs 21 }
aluSerialMddbEntry OBJECT-TYPE
SYNTAX AluSerialMddbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Serial MDDB in the system. Entries for
serial mddbs can not be created and deleted via SNMP SET operations.
The Entries are automatically created when the tmnxMDAAssignedType object is
set to the SCADA MDA type and mode mode supports serail MDDB.
For each aluSerialMddbEntry, there will be a corresponding entry
in the aluScadaBridgeTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluSerialMddbTable 1 }
AluSerialMddbEntry ::=
SEQUENCE {
aluSerialMddbReportAlarms AluRS232ReportStatus,
aluSerialMddbForceActive INTEGER,
aluSerialMddbSquelchStatus Unsigned32,
aluSerialMddbSquelchEnable INTEGER,
aluSerialMddbSquelchTimeout INTEGER,
aluSerialMddbSquelchReset INTEGER,
aluSerialMddbSpeed INTEGER,
aluSerialMddbSquelchResetMode INTEGER,
aluSerialMddbSquelchResetTimeout INTEGER,
aluSerialMddbRedMode INTEGER
}
aluSerialMddbReportAlarms OBJECT-TYPE
SYNTAX AluRS232ReportStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of aluSerialMddbReportAlarms determines if the
the following alarms for branches belong to the Mddb should be monitored.
hcmOof - Reports local HCM out-of-frame errors.
hcmRai - Reports remote HCM alarm indication.
ctrlLeadMon - (not supported)
monClockDev - (not supported)
monDataInac - (not supported)
If enabled, the alarms will be show in aluScadaBranchAlarmStatus"
DEFVAL { {hcmOof, hcmRai} }
::= { aluSerialMddbEntry 1 }
aluSerialMddbForceActive OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluSerialMddbForceActive forces the specified master branch to be
active. default is the master branch 1.
Not configurable in when aluSerialMddbRedMode is auto"
DEFVAL { 1 }
::= { aluSerialMddbEntry 2 }
aluSerialMddbSquelchStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluSerialMddbSquelchStatus shows squelch status of the scada bridge. It is a 32-bit integer and
each bit represent a branch. Bit with value one indicates that the associated branch is squelched."
::= { aluSerialMddbEntry 3 }
aluSerialMddbSquelchEnable OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"During nomal SCADA system operation, it is common for a single slave to lock-up
and continue to send data after the allocated response time. To solve the problem,
the bridge has a squelching function which will over-ride the incoming data on the locked up
slave with all ones.
aluSerialMddbSquelchEnable enables and disables squelching function for the specified MDDB.
"
DEFVAL { false }
::= { aluSerialMddbEntry 4 }
aluSerialMddbSquelchTimeout OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The bridge will start squelching after a user-selectable time period.
aluSerialMddbSquelchTimeout specifies such a period in seconds. It can only be set to value larger than
zero. Value zero is an undefined value."
DEFVAL { 1 }
::= { aluSerialMddbEntry 5 }
aluSerialMddbSquelchReset OBJECT-TYPE
SYNTAX INTEGER {
noAction (1),
action (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluSerialMddbSquelchReset is a one shot action used to reset the squelching."
DEFVAL { noAction }
::= { aluSerialMddbEntry 6 }
aluSerialMddbSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed1200 (1),
speed2400 (2),
speed9600 (3),
speed19200 (4),
speed38400 (5),
speed56000 (6),
speed4800 (23),
speed600 (24)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluSerialMddbSpeed specifies the speed of the Mddb.
A value of 'speed1200' sets the bridge to 1200bps. These
speed definitions are consistent with those used for RS232 port.
The speed of the bridge should match to the speed configured on
the RS232 port of the branches."
DEFVAL { speed2400 }
::= { aluSerialMddbEntry 7 }
aluSerialMddbSquelchResetMode OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
auto (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluSerialMddbResetMode specifies the method of re-enabling squelched branch.
In manual mode, squelched branches can be only re-enabled when user sets aluSerialMddbSquelchReset.
In auto mode, squelched branches will be re-enabled after a user defined timeout period."
DEFVAL { manual }
::= { aluSerialMddbEntry 8 }
aluSerialMddbSquelchResetTimeout OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluSerialMddbResetTimeout specifies how long the squelched branches have to be remain squelched,
after the squelch condition is cleared and before it can be re-enabled.
It is only meaningful when aluSerialMddbResetMode is auto."
DEFVAL { 1 }
::= { aluSerialMddbEntry 9 }
aluSerialMddbRedMode OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
auto (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluSerialMddbRedMode specifies the redundant mode of the bridge.
In auto mode, both master branches are active; one could be for voice and another one for data.
In manual mode, only one master branch can be active; User can use aluSerialMddbForceActive to set a particular master as active."
DEFVAL { manual }
::= { aluSerialMddbEntry 10 }
--
-- Scada Bridge Member Table
--
aluScadaBranchTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluScadaBranchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluScadaBranchTable has an entry for each branch
belonging to a particular scada bridge."
::= { aluPortObjs 22 }
aluScadaBranchEntry OBJECT-TYPE
SYNTAX AluScadaBranchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents one branch on the bridge.
Entries can be created and deleted via SNMP SET operations
using the aluScadaBranchRowStatus object."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluScadaBranchTable 1 }
AluScadaBranchEntry ::=
SEQUENCE {
aluScadaBranchRowStatus RowStatus,
aluScadaBranchAdminStatus INTEGER,
aluScadaBranchOperStatus INTEGER,
aluScadaBranchMultiDrop INTEGER,
aluScadaBranchAlarmStatus AluRS232ReportStatus,
aluScadaBranchDescription TItemLongDescription,
aluScadaBranchEncapType INTEGER,
aluScadaBranchMode INTEGER,
aluScadaBranchSquelch INTEGER,
aluScadaBranchGainInput Integer32,
aluScadaBranchGainOutput Integer32,
aluScadaBranchGainSidetoneEnable TmnxEnabledDisabled,
aluScadaBranchName TNamedItemOrEmpty
}
aluScadaBranchRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluScadaBranchRowStatus controls the creation and deletion of
row entries in the aluScadaBranchTable. The tmnxPortPortID
The port ID contains the slot, mda, bridge id and branch id
encoded into it."
::= { aluScadaBranchEntry 1 }
aluScadaBranchAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
outOfService (0),
inService (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluScadaBranchAdminStatus indicates the admin status of the scada branch."
::= { aluScadaBranchEntry 2 }
aluScadaBranchOperStatus OBJECT-TYPE
SYNTAX INTEGER {
outOfService (0),
inService (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluScadaBranchOperStatus indicates the operational status of the scada branch"
::= { aluScadaBranchEntry 3 }
aluScadaBranchMultiDrop OBJECT-TYPE
SYNTAX INTEGER {
slave (1),
master (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluScadaBranchMultiDrop is used to specify the Multi-drop Data Bridge
(Mddb) mode of the branch. Branch 1-2 are fixed to Master, and 3-32
are fixed to Slaves.
This object is not applicable while aluExtTmnxMDACapabilityMode is
'modeC' (ie. VCB)."
::= { aluScadaBranchEntry 4 }
aluScadaBranchAlarmStatus OBJECT-TYPE
SYNTAX AluRS232ReportStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluScadaBranchAlarmStatus indicates the alarms on this
scada branch.
This object is not applicable while aluExtTmnxMDACapabilityMode is
'modeC' (ie. VCB)."
::= { aluScadaBranchEntry 5 }
aluScadaBranchDescription OBJECT-TYPE
SYNTAX TItemLongDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual string containing user supplied information about the
scada bridge branch."
DEFVAL { ''H }
::= { aluScadaBranchEntry 6 }
aluScadaBranchEncapType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
nullEncap (1),
qEncap (2),
mplsEncap (3),
bcpNullEncap (4),
bcpDot1qEncap (5),
ipcpEncap (6),
frEncap (7),
pppAutoEncap (8),
atmEncap (9),
qinqEncap (10),
wanMirrorEncap (11),
ciscoHDLCEncap (12),
cemEncap (13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of encapsulation protocol configured on this branch. It
scada bridge branch."
DEFVAL { cemEncap }
::= { aluScadaBranchEntry 7 }
aluScadaBranchMode OBJECT-TYPE
SYNTAX INTEGER {
undefined (0),
access (1),
network (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aluScadaBranchMode indicates if the branch is configured as a service access or a network access."
DEFVAL { access }
::= { aluScadaBranchEntry 8 }
aluScadaBranchSquelch OBJECT-TYPE
SYNTAX INTEGER {
undefined (0),
disabled (1),
enabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The aluScadaBranchSquelch indicates if the branch is enabled for
squelch. If enabled, the bridge-level squelch needs to be enabled as
well to take effect; default value is enabled for slaves and disabled
for masters to allow a seemless upgrade for mddb branches.
This object is invalid while aluExtTmnxMDACapabilityMode is 'modeC'
(ie. VCB)."
DEFVAL { disabled }
::= { aluScadaBranchEntry 9 }
aluScadaBranchGainInput OBJECT-TYPE
SYNTAX Integer32 (-160..90)
UNITS "tenths of decibels"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluScadaBranchGainInput specifies the input
gain for a given branch.
This object is valid only while aluExtTmnxMDACapabilityMode is
'modeC' (ie. VCB).
Although the units are in tenths of decibels, only increments of 1db
are currently supported (eg. -160, -150, ..., 80, 90)."
DEFVAL { 0 }
::= { aluScadaBranchEntry 10 }
aluScadaBranchGainOutput OBJECT-TYPE
SYNTAX Integer32 (-160..90)
UNITS "tenths of decibels"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluScadaBranchGainOutput specifies the output
gain for a given branch.
This object is valid only while aluExtTmnxMDACapabilityMode is
'modeC' (ie. VCB).
Although the units are in tenths of decibels, only increments of 1db
are currently supported (eg. -160, -150, ..., 80, 90)."
DEFVAL { 0 }
::= { aluScadaBranchEntry 11 }
aluScadaBranchGainSidetoneEnable OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluScadaBranchGainSidetoneEnable specifies
whether sidetone gain is to be applied for a given branch.
This object is valid only while aluExtTmnxMDAVcbApplication is 'vcb'.
"
DEFVAL { disabled }
::= { aluScadaBranchEntry 12 }
aluScadaBranchName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in commands
entered at the device's `console'. This might be a text
name, such as `1/1/1.1'."
::= { aluScadaBranchEntry 13 }
--
-- Ethernet Loopback Vlan Table
--
aluPortCfmLbVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortCfmLbVlanEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The aluPortCfmLbVlanTable has an entry for a vlan Id of the port that must have
aluExtPortEtherLoopbackCfmLbMode set to priority-dot1p."
::= { aluPortObjs 23 }
aluPortCfmLbVlanEntry OBJECT-TYPE
SYNTAX AluPortCfmLbVlanEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each row entry represents an acceptable vlan ID in the tag of incoming CFM LB frames
destined to the ethernet port with tmnxPortPortID.
Entries can be created and deleted via SNMP SET operations using the aluPortCfmLbVlanRowStatus object. "
INDEX { tmnxChassisIndex, tmnxPortPortID, aluPortCfmLbVlanId }
::= { aluPortCfmLbVlanTable 1 }
AluPortCfmLbVlanEntry ::=
SEQUENCE {
aluPortCfmLbVlanId Unsigned32,
aluPortCfmLbVlanRowStatus RowStatus
}
aluPortCfmLbVlanId OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
" aluPortCfmLbVlanId indicates the vlan ID of the ethernet port."
::= { aluPortCfmLbVlanEntry 1 }
aluPortCfmLbVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of aluPortCfmLbVlanRowStatus specifies the status of this row.
The only values supported during a set operation are 'createAndGo' and 'destroy'.
'createAndGo' can only be applied to ports with aluExtPortEtherLoopbackCfmLbMode set to priority-dot1p.
When createAndGo is successful, the value of aluPortCfmLbVlanRowStatus becomes 'active'. Any incoming
CFM LB frame destined for this tmnxPortPortID will get processed if it has no vlan tags or it has a vlan tag
matched with aluPortCfmLbVlanId of an active row entry."
::= { aluPortCfmLbVlanEntry 2 }
--
-- ALU GNSS Port table
--
aluGnssPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluGnssPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluGnssPortTable has an entry for a physical GNSS port."
::= { aluPortObjs 24 }
aluGnssPortEntry OBJECT-TYPE
SYNTAX AluGnssPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a physical GNSS port on an IOM card in a
chassis in the system. Entries cannot be created and deleted via SNMP
SET operations. Entries in this table will be created automatically
when the tmnxMDAAssignedType object is set to a GNSS-capable MDA type.
The aluGnssPortEntry contains attributes that are unique to the GNSS
TmnxPortType. The tmnxPortPortID contains the slot, mda and port
numbers encoded into it.
For each aluGnssPortEntry, there will be a corresponding entry in the
tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluGnssPortTable 1 }
AluGnssPortEntry ::=
SEQUENCE {
aluGnssPortLastChangeTime TimeStamp,
aluGnssPortType BITS,
aluGnssPortAntennaCableDelay INTEGER,
aluGnssPortElevationMaskAngle Integer32,
aluGnssPortVisibleSatelliteCount Unsigned32,
aluGnssPortUsedSatelliteCount Unsigned32,
aluGnssPortAntennaStatus INTEGER,
aluGnssPortSyncStatus INTEGER,
aluGnssPortPositionLatitude INTEGER,
aluGnssPortPositionLongitude INTEGER,
aluGnssPortPositionAltitude INTEGER,
aluGnssPortDateAndTime DateAndTime,
aluGnssPortReceiverStatus DisplayString,
aluGnssPortCurUtcOffset Integer32,
aluGnssPortCurUtcOffsetValid TruthValue,
aluGnssPortReceiverFwVersion DisplayString
}
aluGnssPortLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluGnssPortLastChangeTime indicates the sysUpTime at
the time of the last modification of this entry."
::= { aluGnssPortEntry 1 }
aluGnssPortType OBJECT-TYPE
SYNTAX BITS {
gps (0),
glonass (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object aluGnssPortType specifies which constellation
types the installed GNSS receiver module shall process."
DEFVAL { {gps} }
::= { aluGnssPortEntry 2 }
aluGnssPortAntennaCableDelay OBJECT-TYPE
SYNTAX INTEGER (0..32767)
UNITS "1 ns"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object aluGnssPortAntennaCableDelay specifies the
antenna cable delay that has to be taken into account given the
characteristics (eg. length) of the installed antenna cable."
DEFVAL { 0 }
::= { aluGnssPortEntry 3 }
aluGnssPortElevationMaskAngle OBJECT-TYPE
SYNTAX Integer32 (0..89)
UNITS "1 degree"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object aluGnssPortElevationMaskAngle specifies the
the elevation mask angle. It provides a method of
filtering satellites to be used by the system.
Elevation angle is the angle above the horizon. When satellites are
close to horizon, there is more atmosphere, troposphere, and
ionosphere for the signals to go through (ie. more noise).
Elevation angle mask determines the minimum elevation angle below
which the GNSS receiver module will not use a satellite in its
computations.
Typical values are 10 and 15 degrees."
DEFVAL { 10 }
::= { aluGnssPortEntry 4 }
aluGnssPortVisibleSatelliteCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortVisibleSatelliteCount indicates the
number of satellites currently 'seen' by the GNSS receiver module."
::= { aluGnssPortEntry 5 }
aluGnssPortUsedSatelliteCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortUsedSatelliteCount indicates the
number of satellites currently 'used' in computations by the GNSS
receiver module."
::= { aluGnssPortEntry 6 }
aluGnssPortAntennaStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
unsupported (2),
ok (3),
overCurrent (4),
underCurrent (5),
noBiasVoltage (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortAntennaStatus indicates the status
of the antenna."
::= { aluGnssPortEntry 7 }
aluGnssPortSyncStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
locked (2),
notLocked (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortSyncStatus indicates the status
of the GNSS receiver module with respect to generating a sync-worthy
clock signal."
::= { aluGnssPortEntry 8 }
aluGnssPortPositionLatitude OBJECT-TYPE
SYNTAX INTEGER (-9000000..9000000|134217727)
UNITS "0.00001 decimal degrees"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortPositionLatitude indicates the
latitude of the antenna.
Encoding:
< 0: west of prime meridian
= 0: at prime meridian
> 0: east of prime meridian
The unit corresponds to a resolution of approximately 1.11 metres.
The default value is 134217727. It's considered invalid. It's used to
signify that a surveyed (valid) position has yet to be determined."
::= { aluGnssPortEntry 9 }
aluGnssPortPositionLongitude OBJECT-TYPE
SYNTAX INTEGER (-18000000..18000000|134217727)
UNITS "0.00001 decimal degrees"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortPositionLongitude indicates the
longitude of the antenna.
Encoding:
< 0: south of equator
= 0: at equator
> 0: north of equator
The unit corresponds to a resolution of approximately 1.11 metres.
The default value is 134217727. It's considered invalid. It's used to
signify that a surveyed (valid) position has yet to be determined."
::= { aluGnssPortEntry 10 }
aluGnssPortPositionAltitude OBJECT-TYPE
SYNTAX INTEGER (-1000..10000|134217727)
UNITS "1 metre"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortPositionAltitude indicates the
altitude of the antenna.
Encoding:
< 0: below sea level
= 0: at sea level
> 0: above sea level
The default value is 134217727. It's considered invalid. It's used to
signify that a surveyed (valid) position has yet to be determined."
::= { aluGnssPortEntry 11 }
aluGnssPortDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortDateAndTime indicates the current
date and time as provided by the receiver module."
::= { aluGnssPortEntry 12 }
aluGnssPortReceiverStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortReceiverStatus indicates the
status of the GNSS receiver module."
::= { aluGnssPortEntry 13 }
aluGnssPortCurUtcOffset OBJECT-TYPE
SYNTAX Integer32 (-65536..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortCurUtcOffset indicates the
current offset between GPS time and UTC in seconds, as provided by the
GNSS receiver module.
The value can be valid or invalid. See aluGnssPortCurUtcOffsetValid."
::= { aluGnssPortEntry 14 }
aluGnssPortCurUtcOffsetValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortCurUtcOffsetValid indicates
'true (1)' if the aluGnssPortCurUtcOffset is known to be correct."
::= { aluGnssPortEntry 15 }
aluGnssPortReceiverFwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluGnssPortReceiverFwVersion indicates
the firmware version of the GNSS receiver module.
The format of the value may differ between receiver modules. For
example, one may return 2.28, another may return 2.02.0."
::= { aluGnssPortEntry 16 }
aluPortScalarObjs OBJECT IDENTIFIER ::= { aluPortObjs 32 }
aluLsrIpLoadBalBtmOfStk OBJECT-TYPE
SYNTAX INTEGER {
profile-1 (1),
profile-2 (2),
profile-3 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluLsrIpLoadBalBtmOfStk specifies whether the is
used in the LAG and ECMP LSR hashing algorithm. This is the global
system setting that all ports will inherit."
DEFVAL { profile-1 }
::= { aluPortScalarObjs 1 }
aluLsrIpLoadBalIngressPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of aluLsrIpLoadBalIngressPort specifies whether ingress port
is used in the LAG and ECMP hashing algorithm. This is the global system
setting that all ports will inherit. When set to 'true', the ingress port
is used in the hashing algorithm."
DEFVAL { false }
::= { aluPortScalarObjs 2 }
--
-- ALU PCM table
--
aluPcmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPcmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"aluPcmTable has an entry for each
PCM bridge on each IOM card in each chassis in the system."
::= { aluPortObjs 25 }
aluPcmEntry OBJECT-TYPE
SYNTAX AluPcmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a PCM bridge in the system. Entries for
serial pcms can not be created and deleted via SNMP SET operations.
The Entries are automatically created when the tmnxMDAAssignedType object is
set to the SCADA MDA type and mode mode supports PCM.
For each aluPcmEntry, there will be a corresponding entry
in the aluScadaBridgeTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluPcmTable 1 }
AluPcmEntry ::=
SEQUENCE {
aluPcmForceActive INTEGER,
aluPcmSquelchStatus Unsigned32,
aluPcmSquelchEnable INTEGER,
aluPcmSquelchTimeout INTEGER,
aluPcmSquelchReset INTEGER,
aluPcmSquelchResetMode INTEGER,
aluPcmSquelchResetTimeout INTEGER,
aluPcmRedMode INTEGER
}
aluPcmForceActive OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluPcmForceActive forces the specified master branch to be
active. default is the master branch 1."
DEFVAL { 1 }
::= { aluPcmEntry 1 }
aluPcmSquelchStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluPcmSquelchStatus shows squelch status of the scada bridge. It is a 32-bit integer and
each bit represent a branch. Bit with value one indicates that the associated branch is squelched."
::= { aluPcmEntry 2 }
aluPcmSquelchEnable OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"During nomal SCADA system operation, it is common for a single slave to lock-up
and continue to send data after the allocated response time. To solve the problem,
the bridge has a squelching function which will over-ride the incoming data on the locked up
slave with all ones.
aluPcmSquelchEnable enables and disables squelching function for the specified PCM.
"
DEFVAL { false }
::= { aluPcmEntry 3 }
aluPcmSquelchTimeout OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The bridge will start squelching after a user-selectable time period."
DEFVAL { 1 }
::= { aluPcmEntry 4 }
aluPcmSquelchReset OBJECT-TYPE
SYNTAX INTEGER {
noAction (1),
action (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluPcmSquelchReset is a one shot action used to reset the squelching."
DEFVAL { noAction }
::= { aluPcmEntry 5 }
aluPcmSquelchResetMode OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
auto (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluPcmResetMode specifies the method of re-enabling squelched branch.
In manual mode, squelched branches will be re-enabled only when user sets aluPcmSquelchReset.
In auto mode, squelched branches will be re-enabled after a user defined timeout period."
DEFVAL { manual }
::= { aluPcmEntry 6 }
aluPcmSquelchResetTimeout OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluPcmResetTimeout specifies how long the squelched branches have to be remain squelched,
after the squelch condition is cleared and before it can be re-enabled.
It is only meaningful when aluPcmResetMode is auto."
DEFVAL { 1 }
::= { aluPcmEntry 7 }
aluPcmRedMode OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
auto (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluPcmRedMode specifies the redundant mode of the bridge.
In auto mode, both master branches are active; one could be for voice and another one for data.
In manual mode, only one master branch can be active; User can use aluPcmForceActive to set a particular master as active."
DEFVAL { manual }
::= { aluPcmEntry 8 }
--
-- ALU PCM table
--
aluPortCemStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluPortCemStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains SAR specific CEM Port statistics."
::= { aluPortObjs 26 }
aluPortCemStatsEntry OBJECT-TYPE
SYNTAX AluPortCemStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains 7705 SAR specific cem stats."
AUGMENTS { tmnxPortCemStatsEntry }
::= { aluPortCemStatsTable 1 }
AluPortCemStatsEntry ::=
SEQUENCE {
aluPortCemStatsEgressSamplingDoneCnt Counter32,
aluPortCemStatsEgressAdjustDoneCnt Counter32
}
aluPortCemStatsEgressSamplingDoneCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluPortCemStatsEgressSamplingDoneCnt indicates
the number of times the sampling is done for asymetric delay
control."
::= { aluPortCemStatsEntry 1 }
aluPortCemStatsEgressAdjustDoneCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluPortCemStatsEgressAdjustDoneCnt indicates
the number of times the adjustment is done for asymetric delay
control."
::= { aluPortCemStatsEntry 2 }
--
-- RS232 Socket Table
--
aluRS232SocketTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluRS232SocketEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluRS232SocketTable has an entry for a Socket entity belonging
to a particular Serial channel."
::= { aluPortObjs 27 }
aluRS232SocketEntry OBJECT-TYPE
SYNTAX AluRS232SocketEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Socket on a particular interface.
Entries can be created and deleted via SNMP SET operations
using the aluRS232SocketRowStatus object.
For each aluRS232SocketEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluRS232SocketTable 1 }
AluRS232SocketEntry ::=
SEQUENCE {
aluRS232SocketRowStatus RowStatus,
aluRS232SocketLastChangeTime TimeStamp,
aluRS232SocketEopLength Unsigned32,
aluRS232SocketEopIdleTimeout Unsigned32,
aluRS232SocketEopSpecialChar Unsigned32,
aluRS232SocketSquelchDelay Unsigned32,
aluRS232SocketUnsquelchDelay Unsigned32,
aluRS232SocketInterSessionDelay Unsigned32,
aluRS232SocketSquelchStatus INTEGER,
aluRS232SocketSquelchReset TmnxActionType
}
aluRS232SocketRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"aluRS232SocketRowStatus controls the creation and deletion of row
entries in the aluRS232SocketTable.
The tmnxPortPortID for a Socket includes a socket ID in the lower bits.
The manager has to first calculate the tmnxPortPortID based on the
TiMOS encoding scheme."
::= { aluRS232SocketEntry 1 }
aluRS232SocketLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluRS232SocketLastChangeTime indicates the time, since
system startup, that the configuration of this Socket was created or
modified."
::= { aluRS232SocketEntry 2 }
aluRS232SocketEopLength OBJECT-TYPE
SYNTAX Unsigned32 (1..1500)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketEopLength specifies the
maximum number of bytes (characters) that may be received from the
Serial data stream.
If and when reached, EOP (end of packet) is assumed and handled
accordingly."
DEFVAL { 1500 }
::= { aluRS232SocketEntry 3 }
aluRS232SocketEopIdleTimeout OBJECT-TYPE
SYNTAX Unsigned32 (10..5000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketEopIdleTimeout specifies the
maximum period of idle time that may elapse since the last received
character from the Serial data stream.
If and when reached, EOP (end of packet) is assumed and handled
accordingly."
DEFVAL { 50 }
::= { aluRS232SocketEntry 4 }
aluRS232SocketEopSpecialChar OBJECT-TYPE
SYNTAX Unsigned32 (0..255|4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketEopSpecialChar specifies the
numerical value for the character, considered special, that may be
received from the Serial data stream.
If and when received, EOP (end of packet) is recognized and handled
accordingly.
The value 0xFFFFFFFF means disabled (ie. no character is special)."
DEFVAL { 4294967295 }
::= { aluRS232SocketEntry 5 }
aluRS232SocketSquelchDelay OBJECT-TYPE
SYNTAX Unsigned32 (1..120|4294967295)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketSquelchDelay specifies the
period of time that a continuous data stream is allowed to be received
before squelch is applied. When squelch is applied, the system
suppresses the channel from receiving any more data.
The value 0xFFFFFFFF means disabled (ie. squelch will not get applied
and any concurrent squelch will get cleared immediately)."
DEFVAL { 4294967295 }
::= { aluRS232SocketEntry 6 }
aluRS232SocketUnsquelchDelay OBJECT-TYPE
SYNTAX Unsigned32 (1..120|4294967295)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketUnsquelchDelay specifies the
period of time that squelch will persist before it gets cleared
automatically.
The value 0xFFFFFFFF means disabled (ie. squelch will not get cleared
automatically)."
DEFVAL { 4294967295 }
::= { aluRS232SocketEntry 7 }
aluRS232SocketInterSessionDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketInterSessionDelay specifies the
nominal period of time to idle between transmitting the last bit of
the current session and transmitting the first bit of the next
session."
DEFVAL { 10 }
::= { aluRS232SocketEntry 8 }
aluRS232SocketSquelchStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketSquelchStatus indicates the
squelch status."
::= { aluRS232SocketEntry 9 }
aluRS232SocketSquelchReset OBJECT-TYPE
SYNTAX TmnxActionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object aluRS232SocketSquelchReset specifies that a
manual reset of squelch is to be triggered.
Setting this object to the value of 'doAction' triggers the one-shot
reset operation. Any concurrent squelch will get cleared immediately
and aluRS232SocketSquelchDelay will restart accordingly.
Reading this object will return the value of 'notApplicable'."
DEFVAL { notApplicable }
::= { aluRS232SocketEntry 10 }
-- --------------------------------------------------
-- dot1X Mac-Based Authentication Config table
-- --------------------------------------------------
aluDot1xAuthConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluDot1xAuthConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains dot1x PAE port information in the
system."
::= { aluPortObjs 28 }
aluDot1xAuthConfigEntry OBJECT-TYPE
SYNTAX AluDot1xAuthConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row-entry that contains port specific dot1x PAE
information."
INDEX { dot1xPaePortNumber }
::= { aluDot1xAuthConfigTable 1 }
AluDot1xAuthConfigEntry ::=
SEQUENCE {
aluDot1xAuthMacAuthEnabled TruthValue,
aluDot1xAuthMacAuthWait Unsigned32
}
aluDot1xAuthMacAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of aluDot1xAuthMacAuthEnabled specifies whether
a dot1x enabled ethernet port can aithenticate itself
using MAC based authentication methods. MAC based
authentication will only occur if no EAP frames are
recieved on the port indicating the connected supplicant
does not support DOT1x authentication."
DEFVAL { false }
::= { aluDot1xAuthConfigEntry 1 }
aluDot1xAuthMacAuthWait OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object aluDot1xAuthMacAuthWait specifies the
period of time that no EAP packets must be recieved in order start
MAC Based Authentication on the port.
aluDot1xAuthMacAuthEnabled must be set to 'true' before this value
is used."
DEFVAL { 0 }
::= { aluDot1xAuthConfigEntry 2 }
-- --------------------------------------------------
-- dot1X Mac-Based Authentication Stats table
-- --------------------------------------------------
aluDot1xAuthStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluDot1xAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains dot1x PAE port information in the
system."
::= { aluPortObjs 29 }
aluDot1xAuthStatsEntry OBJECT-TYPE
SYNTAX AluDot1xAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row-entry that contains port specific dot1x PAE
information."
INDEX { dot1xPaePortNumber }
::= { aluDot1xAuthStatsTable 1 }
AluDot1xAuthStatsEntry ::=
SEQUENCE {
aluDot1xAuthLastAuthMethod INTEGER,
aluDot1xAuthMacAuthFramesRx Unsigned32
}
aluDot1xAuthLastAuthMethod OBJECT-TYPE
SYNTAX INTEGER {
none (0),
eap (1),
mac (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of aluDot1xAuthLastAuthMethod indicates
the last authentication method of the port.
(0) - Never authenticated
(1) - EAP - DOT1x EAPOL Frames
(2) - Source MAC Based Authentication"
::= { aluDot1xAuthStatsEntry 1 }
aluDot1xAuthMacAuthFramesRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object aluDot1xAuthMacAuthFramesRx specifies the
the number of ethernet frames recieved to perform MAC Authentication
on."
::= { aluDot1xAuthStatsEntry 2 }
--
-- ALU SCADA VCB table
--
aluScadaVcbTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluScadaVcbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aluScadaVcbTable has an entry for each SCADA bridge,
aluScadaBridgeEntry."
::= { aluPortObjs 30 }
aluScadaVcbEntry OBJECT-TYPE
SYNTAX AluScadaVcbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Voice Conference Bridge (VCB) in the
system.
Entries cannot be created and deleted via SNMP SET operations. They
are created automatically for SCADA MDAs, such as the ISC, when the
MDA mode, aluExtTmnxMDACapabilityMode, is set to 'modeC' (ie. VCB).
For each aluScadaVcbEntry, there will be a corresponding entry in the
aluScadaBridgeTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluScadaVcbTable 1 }
AluScadaVcbEntry ::=
SEQUENCE {
aluScadaVcbIdleCode Unsigned32,
aluScadaVcbSeizedCode Unsigned32,
aluScadaVcbSignalMode INTEGER
}
aluScadaVcbIdleCode OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object aluScadaVcbIdleCode specifies the signaling
code transmitted on all branches of the bridge indicating idle. It
is also used to interpret received signaling codes from the branches.
This object is valid only while aluExtTmnxMDAVcbApplication is
'vcbBranchInitiate'.
The object is a bitmap arranged as follows:
bit pos: | 7 6 5 4 3 2 1 0 |
| x x x x A B C D |
'x' - don't care
The default value depends on aluExtTmnxMDAVoiceCompandingLaw:
For muLaw - 0 (or 0x0 or 0b0000)
For aLaw - 13 (or 0xD or 0b1101) "
::= { aluScadaVcbEntry 1 }
aluScadaVcbSeizedCode OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object aluScadaVcbSeizedCode specifies the signaling
code transmitted on all branches of the bridge indicating seized. It
is also used to interpret received signaling codes from the branches.
This object is valid only while aluExtTmnxMDAVcbApplication is
'vcbBranchInitiate'.
The object is a bitmap arranged as follows:
bit pos: | 7 6 5 4 3 2 1 0 |
| x x x x A B C D |
'x' - don't care
The default value depends on aluExtTmnxMDAVoiceCompandingLaw:
For muLaw - 15 (or 0xF or 0b1111)
For aLaw - 5 (or 0x5 or 0b0101) "
::= { aluScadaVcbEntry 2 }
aluScadaVcbSignalMode OBJECT-TYPE
SYNTAX INTEGER {
none (1),
cas (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aluScadaVcbSignalMode indicates the type of signalling
associated with the bridge (aka channel):
none - Indicates no signalling on this channel
cas - Indicates Channel Associated Signalling (CAS) on this channel
aluScadaVcbSignalMode is like tmnxDS1SignalMode but it's read-only."
::= { aluScadaVcbEntry 3 }
--
-- ALU Extensions Ethernet BN Change table
--
aluExtPortEtherBnChangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AluExtPortEtherBnChangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Nokia SAR series ethernet port Bandwidch Notification change
table for providing, via SNMP, the capability of retrieving the changes
resulted from the processing of incoming Eth-BN."
::= { aluPortObjs 31}
aluExtPortEtherBnChangeEntry OBJECT-TYPE
SYNTAX AluExtPortEtherBnChangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in aluExtPortEtherBnChangeTable. Entries are
created and deleted by the system depending port configuration."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { aluExtPortEtherBnChangeTable 1 }
AluExtPortEtherBnChangeEntry ::=
SEQUENCE {
aluExtPortEtherBnEgressRateInUse Integer32,
aluExtPortEtherBnLastRateChangeTime TimeStamp,
aluExtPortEtherBnLastMgsRxTime TimeStamp,
aluExtPortEtherBnNumRateChanges Counter64,
aluExtPortEtherBnNumMsgRx Counter64,
aluExtPortEtherBnNumInvalidMsgRx Counter64,
aluExtPortEtherBnNumBWOutOfRange Counter64
}
aluExtPortEtherBnEgressRateInUse OBJECT-TYPE
SYNTAX Integer32
UNITS "kilo-bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When aluExtPortEtherBnAllowed is 'true', the value of aluExtPortEtherBnEgressRateInUse indicates the
egress rate currently being enforced.
aluExtPortEtherBnEgressRateInUse is set to the default value of '-1' to indicate tmnxPortEtherEgressRate
is currently enforced.
When the difference between the sysUpTime of a received Y.1731 ETH-BNM and the value of
aluExtPortEtherBnLastRateChangeTime is greater than the configured aluExtPortEtherBnHoldTime, then
aluExtPortEtherBnEgressRateInUse is modified to use the current rate in the Y.1731 ETH-BNM frame."
DEFVAL { -1 }
::= { aluExtPortEtherBnChangeEntry 1 }
aluExtPortEtherBnLastRateChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherBnLastRateChangeTime contains the sysUpTime value as time stamp
of the most recently modified aluExtPortEtherBnEgressRateInUse of this port."
::= { aluExtPortEtherBnChangeEntry 2 }
aluExtPortEtherBnLastMgsRxTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherBnLastMgsRxTime contains the sysUpTime value as time stamp
of the most recently received valid Y.1731 ETH-BNM frame at this port.
This frame may or may not cause the change of aluExtPortEtherBnLastRateChangeTime. "
::= { aluExtPortEtherBnChangeEntry 3 }
aluExtPortEtherBnNumRateChanges OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherBnNumRateChanges is the number of times the Y.1731 ETH-BNM has changed
the egress rate aluExtPortEtherBnEgressRateInUse at this port while
aluExtPortEtherBnAllowed was set to 'true'.
aluExtPortEtherBnNumRateChanges is reset to 0 when aluExtPortEtherBnAllowed modified to 'false',
or when clear port stats, or when the port is deleted."
::= { aluExtPortEtherBnChangeEntry 4 }
aluExtPortEtherBnNumMsgRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherBnNumMsgRx has the number of valid Y.1731 ETH-BNM received at this port since
aluExtPortEtherBnAllowed was set to 'true'.
aluExtPortEtherBnNumMsgRx is reset to 0 when aluExtPortEtherBnAllowed modified to 'false',
or when clear port stats, or when the port is deleted."
::= { aluExtPortEtherBnChangeEntry 5 }
aluExtPortEtherBnNumInvalidMsgRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherBnNumInvalidMsgRx has the number of invvalid Y.1731 ETH-BNM received and dropped
at this port since aluExtPortEtherBnAllowed was set to 'true'.
aluExtPortEtherBnNumInvalidMsgRx is reset to 0 when aluExtPortEtherBnAllowed modified to 'false',
or when clear port stats, or when the port is deleted."
::= { aluExtPortEtherBnChangeEntry 6 }
aluExtPortEtherBnNumBWOutOfRange OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aluExtPortEtherBnNumBWOutOfRange has the number of Y.1731 ETH-BNM received with bandwidth requested
being bigger than the maximum bandwidth supported by the port, as well as those frames with bandwidth
requested being smaller than the minimum bandwidth supported at this port .
aluExtPortEtherBnNumBWOutOfRange is reset to 0 when aluExtPortEtherBnAllowed modified to 'false',
or when clear port stats, or when the port is deleted."
::= { aluExtPortEtherBnChangeEntry 7 }
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- Notification Definition section
--
--
-- Port Notification Objects
--
aluPortEtherSfpESyncCompatibility NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluExtPortEtherSfpSyncEStatus
}
STATUS current
DESCRIPTION
"Generated when a SFP is installed in a MDA that supports
synchronous ethernet operation."
::= { aluPortNotificationObjects 1 }
aluPortNotifyRS232AlarmReason OBJECT-TYPE
SYNTAX INTEGER {
notUsed (0),
hcmOof (1),
hcmRai (2),
ctrlLeadMon (3),
monClockDev (4),
monDataInac (5)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by alu RS232 Port Notifications, the value of
aluPortNotifyRS232AlarmReason indicates the reason a RS232 interface
alarm has been raised."
::= { aluPortNotificationObjects 2 }
aluPortNotifyDataAlarmReason OBJECT-TYPE
SYNTAX INTEGER {
notUsed (0),
ais (1),
los (2),
rai (3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by alu Data Port Notifications, the value of
aluPortNotifyDataAlarmReason indicates the reason a Data interface
alarm has been raised."
::= { aluPortNotificationObjects 3 }
aluPortNotifyRS232ControlLeadsSignalChange OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object aluPortNotifyRS232ControlLeadsSignalChange is a printable
character string."
::= { aluPortNotificationObjects 4 }
--
-- ALU-PORT-MIB Notifications
--
--
-- Equipment Alarms
--
aluEqPortRS232Alarm NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluPortNotifyRS232AlarmReason
}
STATUS current
DESCRIPTION
"Generated when a RS232 interface alarm condition is detected.
It is generated only when the type of alarm being raised is enabled
in aluRS232ReportAlarm."
::= { aluPortNotification 1 }
aluEqPortRS232AlarmClear NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluPortNotifyRS232AlarmReason
}
STATUS current
DESCRIPTION
"Generated when a RS232 interface alarm condition is cleared.
It is generated only when the type of alarm being cleared is enabled
in aluRS232ReportAlarm."
::= { aluPortNotification 2 }
aluRS232LoopbackStarted NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluRS232Loopback
}
STATUS current
DESCRIPTION
"The aluRS232LoopbackStarted notification is generated when a
loopback is provisioned on a RS-232/V.35/X.21/RS-530 port."
::= { aluPortNotification 3 }
aluRS232LoopbackStopped NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluRS232Loopback
}
STATUS current
DESCRIPTION
"The aluRS232LoopbackStopped notification is generated when a
loopback is removed on a RS-232/V.35/X.21/RS-530 port. The value of
aluRS232Loopback specifies the type of loopback that was
configured and has now been removed."
::= { aluPortNotification 4 }
aluVoiceLoopbackStarted NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluVoiceLoopback
}
STATUS current
DESCRIPTION
"The aluVoiceLoopbackStarted notification is generated when a
loopback is provisioned on a voice port."
::= { aluPortNotification 5 }
aluVoiceLoopbackStopped NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluVoiceLoopback
}
STATUS current
DESCRIPTION
"The aluVoiceLoopbackStopped notification is generated when a
loopback is removed on a voice port. The value of
aluVoiceLoopback specifies the type of loopback that was
configured and has now been removed."
::= { aluPortNotification 6 }
aluGponPortInbandAlarm NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluGponPortG984SerialNumber
}
STATUS current
DESCRIPTION
"Generated when an alarm condition is detected on the inband signaling
mechanism between the ONT and SAR"
::= { aluPortNotification 7 }
aluGponPortInbandAlarmClear NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluGponPortG984SerialNumber
}
STATUS current
DESCRIPTION
"Generated when an alarm condition is cleared on the inband signaling
mechanism between the ONT and SAR"
::= { aluPortNotification 8 }
aluEqPortDataAlarm NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluPortNotifyDataAlarmReason
}
STATUS current
DESCRIPTION
"Generated when a Data interface alarm condition is detected.
It is generated only when the type of alarm being raised is enabled
in aluDataReportAlarm."
::= { aluPortNotification 9 }
aluEqPortDataAlarmClear NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluPortNotifyDataAlarmReason
}
STATUS current
DESCRIPTION
"Generated when a Data interface alarm condition is cleared.
It is generated only when the type of alarm being cleared is enabled
in aluDataReportAlarm."
::= { aluPortNotification 10 }
aluDataLoopbackStarted NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluDataLoopback
}
STATUS current
DESCRIPTION
"The aluDataLoopbackStarted notification is generated when a
loopback is provisioned on a Data port."
::= { aluPortNotification 11 }
aluDataLoopbackStopped NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluDataLoopback
}
STATUS current
DESCRIPTION
"The aluDataLoopbackStopped notification is generated when a
loopback is removed on a Data port. The value of
aluDataLoopback specifies the type of loopback that was
configured and has now been removed."
::= { aluPortNotification 12 }
aluExtPethPsePortStatusChange NOTIFICATION-TYPE
OBJECTS {
pethPsePortDetectionStatus,
pethPsePortPowerClassifications,
aluExtPethPsePortFaultReason
}
STATUS current
DESCRIPTION
"Generated when there is a change in Power Classification,
Detection Status, Fault Reason, or Oper Status on a power ethernet port."
::= { aluPortNotification 13 }
aluSerialMddbSquelchStatusChanged NOTIFICATION-TYPE
OBJECTS {
aluSerialMddbSquelchStatus
}
STATUS current
DESCRIPTION
"The aluSerialMddbSquelchStatusChanged notification is generated when the
Squelch Status of a scada bridge is changed. The value of
aluSerialMddbSquelchStatus indicates the new squelch status detected."
::= { aluPortNotification 14 }
aluSerialMddbSquelchResetIssued NOTIFICATION-TYPE
OBJECTS {
aluSerialMddbSquelchStatus
}
STATUS current
DESCRIPTION
"The aluSerialMddbSquelchResetIssued notification is generated when user
reset the squelch of the scada bridge. The value of
aluSerialMddbSquelchStatus indicates the existing squelch status."
::= { aluPortNotification 15 }
aluGnssPortStatusChange NOTIFICATION-TYPE
OBJECTS {
aluGnssPortSyncStatus,
aluGnssPortAntennaStatus,
aluGnssPortReceiverStatus
}
STATUS current
DESCRIPTION
"The aluGnssPortStatusChange notification is generated when
there is a change in the status of the GNSS receiver. This
notification
is a point-in-time status change event.
[CAUSE] This notification may be triggered for a variety of reasons
including (but not limited to):
1) The antenna is experiencing fault issues
2) The number of visible satellites is too low
[EFFECT] The GNSS receiver is not able to provide a sync-worthy clock
signal.
[RECOVERY] If the customer is expecting the GNSS receiver to be
locked,
the customer will need to determine the root cause (for example,
insufficient visible satellites) and resolve the issue (for example,
ensure aluGnssPortElevationMaskAngle is set accordingly)."
::= { aluPortNotification 16 }
aluPcmSquelchStatusChanged NOTIFICATION-TYPE
OBJECTS {
aluPcmSquelchStatus
}
STATUS current
DESCRIPTION
"The aluPcmSquelchStatusChanged notification is generated when the
Squelch Status of a scada bridge is changed. The value of
aluPcmSquelchStatus indicates the new squelch status detected."
::= { aluPortNotification 17 }
aluPcmSquelchResetIssued NOTIFICATION-TYPE
OBJECTS {
aluPcmSquelchStatus
}
STATUS current
DESCRIPTION
"The aluPcmSquelchResetIssued notification is generated when user
reset the squelch of the scada bridge. The value of
aluPcmSquelchStatus indicates the existing squelch status."
::= { aluPortNotification 18 }
aluRS232ControlLeadsSignalChange NOTIFICATION-TYPE
OBJECTS {
aluPortNotifyRS232ControlLeadsSignalChange
}
STATUS current
DESCRIPTION
"The aluRS232ControlLeadsSignalChange notification is generated when
there is a change in the status of a Serial control lead signal. This
notification is a point-in-time status change event.
[CAUSE] This notification may be triggered for a variety of reasons.
One example is that the far-end equipment has been disconnected.
[EFFECT] Alert user of transitions.
[RECOVERY] Determine root cause and resolve accordingly."
::= { aluPortNotification 19 }
aluRS232SquelchStatusChange NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluRS232SocketSquelchStatus
}
STATUS current
DESCRIPTION
"The aluRS232SquelchStatusChange notification is generated when
there is a change in the status of squelch on the respective channel.
This notification is a point-in-time status change event.
[CAUSE] This notification may be triggered for the following reasons:
1) A continuous stream of data is being received for a specified
period of time, aluRS232SocketSquelchDelay.
2) The continuous stream of data is no longer being received for a
specified period of time, aluRS232SocketUnsquelchDelay.
[EFFECT] Incoming data will be suppressed or unsuppressed accordingly.
[RECOVERY] Determine root cause of far-end sending continuous data
and resolve accordingly."
::= { aluPortNotification 20 }
aluRS232SquelchResetIssued NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluRS232SocketSquelchStatus
}
STATUS current
DESCRIPTION
"The aluRS232SquelchResetIssued notification is generated when the
user triggers a manual reset of squelch via
aluRS232SocketSquelchReset. The value of aluRS232SocketSquelchStatus
indicates the existing squelch status."
::= { aluPortNotification 21 }
aluRS232ClockSyncStateChange NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluRS232ClockSyncState
}
STATUS current
DESCRIPTION
"The aluRS232ClockSyncStateChange notification is generated when the
aluRS232ClockSyncState changes for an RS232 interface."
::= { aluPortNotification 22 }
aluExtDS0ChanGrpLoopbackStarted NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluExtDS0ChanGroupLoopback
}
STATUS current
DESCRIPTION
"The aluExtDS0ChanGrpLoopbackStarted notification is generated when a
loopback is provisioned on a DS0 channel group."
::= { aluPortNotification 23 }
aluExtDS0ChanGrpLoopbackStopped NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
aluExtDS0ChanGroupLoopback
}
STATUS current
DESCRIPTION
"The aluExtDS0ChanGrpLoopbackStopped notification is generated when a
loopback is removed on a DS0 channel group. The value of
aluExtDS0ChanGroupLoopback specifies the type of loopback that was
configured and has now been removed."
::= { aluPortNotification 24 }
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- The compliance specifications.
--
aluPortCompliances OBJECT IDENTIFIER ::= { aluPortConformance 1 }
aluPortGroups OBJECT IDENTIFIER ::= { aluPortConformance 2 }
aluPortComp7705 OBJECT IDENTIFIER ::= { aluPortCompliances 1 }
-- aluPortComp7705V1v0 OBJECT IDENTIFIER ::= { aluPortComp7705 1}
-- aluPortComp7705V1v1 OBJECT IDENTIFIER ::= { aluPortComp7705 2}
-- aluPortComp7705V2v0 OBJECT IDENTIFIER ::= { aluPortComp7705 3}
-- aluPortComp7705V2v1 OBJECT IDENTIFIER ::= { aluPortComp7705 4}
-- aluPortComp7705V3v0 OBJECT IDENTIFIER ::= { aluPortComp7705 5}
-- aluPortComp7705V4v0 OBJECT IDENTIFIER ::= { aluPortComp7705 6}
-- aluPortComp7705V5v0 OBJECT IDENTIFIER ::= { aluPortComp7705 7}
-- aluPortComp7705V6v0 OBJECT IDENTIFIER ::= { aluPortComp7705 8}
-- aluPortComp7705V6v1 OBJECT IDENTIFIER ::= { aluPortComp7705 9}
-- aluPortComp7705V7v0 OBJECT IDENTIFIER ::= { aluPortComp7705 10}
-- aluPortComp7705V8v0 OBJECT IDENTIFIER ::= { aluPortComp7705 11}
-- aluPortComp7705V9v0 OBJECT IDENTIFIER ::= { aluPortComp7705 12}
aluPortComp7705V1v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 1.0 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluExtDS1PortLineImpedanceGroup,
aluPortDiscardStatsGroup
}
::= { aluPortComp7705 1 }
aluPortComp7705V1v1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 1.1 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluExtPortEtherSfpSyncEGroup,
aluPortAcrClkStatsGroup
}
::= { aluPortComp7705 2 }
aluPortComp7705V2v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 2.0 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluExtDS1HoldTimeGroup
}
::= { aluPortComp7705 3 }
aluPortComp7705V2v1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 2.1 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluRS232GroupV2v1,
aluPortNotificationGroupV2v1,
aluExtPortCemGroupV2v1,
aluPortNotifyObjsGroupV2v1,
aluExtPortEtherLoopbackGroupV2v1
}
::= { aluPortComp7705 4 }
aluPortComp7705V3v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 3.0 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluVoiceGroup,
aluVoiceNotifGroup,
aluRS232MultiDropGroup,
aluPortDiscardStatsGroupV3v0,
aluPortNetControlStatsGroupV3v0,
aluRS232SBitSignalingGroup,
aluRS232DataPositionGroup
}
::= { aluPortComp7705 5 }
aluPortComp7705V4v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 4.0 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluExtPortEtherLoopbackGroupV4v0,
aluPortEtherSfpSyncECompatibilityGroup
}
::= { aluPortComp7705 6 }
aluPortComp7705V5v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 5.0 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluGponGroupV5v0,
aluDslGroupV5v0,
aluGponStatsGroupV5v0,
aluDslStatsGroupV5v0,
aluDslGponNotificationGroupV5v0,
aluVoiceTeleprotectionGroup,
aluDataGroup,
aluDataNotifGroup,
aluExtDS0ChanGroupSignalModeGroup,
aluPortCtlStatsGroup,
aluExtPortEtherLoopbackGroupV5v0,
aluDataPortNotifyObjsGroup
}
::= { aluPortComp7705 7 }
aluPortComp7705V6v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 6.0 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluPortEthernetGroupV6v0,
aluPortDiscardStatsGroupV6v0,
aluPortEtherXorGroupV6v0,
aluPwrEthPortGroupV6v0,
aluRS232HoldTimeGroup,
aluExtPethPsePortNotificationGroupV6v0
}
::= { aluPortComp7705 8 }
aluPortComp7705V6v1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 6.1 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluGnssPortGroup,
aluPortDiscardStatsGroupV6v1,
aluScadaBridgeNotificationGroupV6v1,
aluGnssPortNotifGroup
}
::= { aluPortComp7705 9 }
aluPortComp7705V7v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 7.0 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluRS232ControlLeadsNotifGroup,
aluGnssPortReceiverFwVersGroup
}
::= { aluPortComp7705 10 }
aluPortComp7705V8v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 8.0 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluRS232SocketGroup,
aluRS232SocketNotifGroup,
aluRS232SocketStatsGroup,
aluDot1xAuthGroup,
aluScadaVcbGroup,
aluScadaBranchGainGroup
}
::= { aluPortComp7705 11 }
aluPortComp7705V9v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 9.0 of ALU-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
aluRS232ClockSyncGroup,
aluRS232ClockSyncNotifGroup,
aluRS232InvertClockGroup,
aluRS232MonClockDataGroup,
aluScadaNameGroup,
aluExtDS0ChanGroupLoopbackGroup,
aluExtDS0ChanGrpLpbckNotifGroup,
aluPortPtpTimestampStatsV9v0Group
}
::= { aluPortComp7705 12 }
-- units of conformance
aluExtDS1PortLineImpedanceGroup OBJECT-GROUP
OBJECTS { aluExtDS1PortLineImpedance
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the line impedance
of DS1/E1 physical ports on Nokia SAR series systems."
::= { aluPortGroups 1 }
aluPortDiscardStatsGroup OBJECT-GROUP
OBJECTS { aluPortInL2AddrProtoDiscards,
aluPortInMPLSLabelDiscards,
aluPortInIPAddrProtoDiscards,
aluPortInVlanIdDiscards,
aluPortInHdlcCrcDiscards,
aluPortOutPortMtuDiscards,
aluPortInCsmQHiPriDiscards,
aluPortInCsmQLowPriDiscards,
aluPortInCsmQFtpPriDiscards,
aluPortOutCsmQDiscards,
aluPortInOtherDiscards,
aluPortOutOtherDiscards
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting retrieval of the detailed packet
discard statistics on Nokia SAR series systems"
::= { aluPortGroups 2 }
aluExtPortEtherSfpSyncEGroup OBJECT-GROUP
OBJECTS {
aluExtPortEtherSfpSyncEStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting the management of the capabilities
of synchronous operations with respect to the installed SFP's."
::= { aluPortGroups 3 }
aluPortEtherSfpSyncECompatibilityGroup NOTIFICATION-GROUP
NOTIFICATIONS {
aluPortEtherSfpESyncCompatibility
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of Synchronous
Ethernet with respect to installed SFP's on the Nokia 7705 SAR."
::= { aluPortGroups 4 }
aluPortAcrClkStatsGroup OBJECT-GROUP
OBJECTS {
aluLastUpdateTime,
aluTotalMinutesIn24Hour,
aluCurrent24HourFreqOffsetMeanPpb,
aluCurrent24HourFreqOffsetStdDevPpb,
aluMaxShortIntervalMinutes,
aluTotalShortIntervalMinutes,
aluCurrent1MinValidData,
aluCurrent1MinPhaseErrorMeanPpb,
aluCurrent1MinPhaseErrorStdDevNs,
aluCurrent1MinPhaseErrorMeanNs,
aluCurrent1MinFreqOffsetMeanPpb,
aluCurrent1MinFreqOffsetStdDevPpb,
aluIntervalNumber,
aluIntervalValidData,
aluIntervalUpdateTime,
aluIntervalPhaseErrorMeanPpb,
aluIntervalPhaseErrorStdDevNs,
aluIntervalPhaseErrorMeanNs,
aluIntervalFreqOffsetMeanPpb,
aluIntervalFreqOffsetStdDevPpb
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of the ACR clock statistic
on Nokia SAR series systems"
::= { aluPortGroups 5 }
aluExtDS1HoldTimeGroup OBJECT-GROUP
OBJECTS {
aluExtDS1HoldTimeUp,
aluExtDS1HoldTimeDown
}
STATUS current
DESCRIPTION
"The group of objects supporting management of hold-time
capabilities on Nokia SAR series systems."
::= { aluPortGroups 6 }
aluRS232GroupV2v1 OBJECT-GROUP
OBJECTS {
aluRS232PortLastChangeTime,
aluRS232PortType,
aluRS232RowStatus,
aluRS232LastChangeTime,
aluRS232Type,
aluRS232DeviceMode,
aluRS232DeviceGender,
aluRS232Duplex,
aluRS232Speed,
aluRS232ClockSource,
aluRS232Loopback,
aluRS232CharacterLength,
aluRS232Parity,
aluRS232StopBits,
aluRS232ReportAlarm,
aluRS232ReportAlarmStatus,
aluRS232ControlLeadDtrDsr,
aluRS232ControlLeadRtsDcdC,
aluRS232ControlLeadAlbCts,
aluRS232ControlLeadRdlRi,
aluRS232ControlLeadDsrDtr,
aluRS232ControlLeadDcdRtsI,
aluRS232ControlLeadCtsAlb,
aluRS232ControlLeadRiRdl,
aluRS232ChanGroupRowStatus,
aluRS232ChanGroupTimeSlots,
aluRS232ChanGroupMTU,
aluRS232ChanGroupOperMTU,
aluRS232ChanGroupCRC,
aluRS232ChanGroupIdleCycleFlags,
aluRS232ChanGroupPayloadFillType,
aluRS232ChanGroupPayloadPattern,
aluRS232ControlLeadsState
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Serial type ports
for version 2.1 on Nokia SAR series systems"
::= { aluPortGroups 7 }
aluPortNotificationGroupV2v1 NOTIFICATION-GROUP
NOTIFICATIONS { aluEqPortRS232Alarm,
aluEqPortRS232AlarmClear,
aluRS232LoopbackStarted,
aluRS232LoopbackStopped
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of physical
ports for revision 2.1 on Nokia SAR series systems."
::= { aluPortGroups 8 }
aluExtPortCemGroupV2v1 OBJECT-GROUP
OBJECTS {
aluExtDS1SignalBitsState
}
STATUS current
DESCRIPTION
"The group of objects supporting management of CEM encapsulation TDM
type ports for revision 2.1 on Nokia SAR series systems."
::= { aluPortGroups 9 }
aluVoiceGroup OBJECT-GROUP
OBJECTS {
aluVoicePortLastChangeTime,
aluVoicePortType,
aluVoicePortAudioWires,
aluVoicePortTlpRx,
aluVoicePortTlpTx,
aluVoiceRowStatus,
aluVoiceLastChangeTime,
aluVoiceType,
aluVoiceSignalingMode,
aluVoiceLoopback,
aluVoiceFaultSignaling,
aluVoiceSignalBitsState,
aluVoiceClockSource,
aluVoiceChanGroupRowStatus,
aluVoiceChanGroupMTU,
aluVoiceChanGroupOperMTU,
aluVoiceSignalingLeadE,
aluVoiceSignalingLeadM,
aluVoiceSignalingLeadsState,
aluVoiceSignalMode,
aluVoiceCallState,
aluVoiceIncomingCallCount,
aluVoiceIncomingCallCountAns,
aluVoiceIncomingCallTime,
aluVoiceIncomingCallTimeAns,
aluVoiceOutgoingCallCount,
aluVoiceOutgoingCallCountAns,
aluVoiceOutgoingCallTime,
aluVoiceOutgoingCallTimeAns,
aluVoiceOutOfServiceTime,
aluVoiceIdleTime,
aluVoiceTotalCallCount,
aluVoiceTotalCallTime,
aluVoiceIdleCode,
aluVoiceSeizedCode
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Voice type ports
on Nokia SAR series systems."
::= { aluPortGroups 10 }
aluVoiceNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { aluVoiceLoopbackStarted,
aluVoiceLoopbackStopped
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of Voice type ports
on Nokia SAR series systems."
::= { aluPortGroups 11 }
aluPortNotifyObjsGroupV2v1 OBJECT-GROUP
OBJECTS { aluPortNotifyRS232AlarmReason
}
STATUS current
DESCRIPTION
"The group of objects supporting physical port notifications
for revision 2.1 on Nokia SAR series systems."
::= { aluPortGroups 12 }
aluExtPortEtherLoopbackGroupV2v1 OBJECT-GROUP
OBJECTS {
aluExtPortEtherLoopback,
aluExtPortEtherLoopbackTimer,
aluExtPortEtherLoopbackTimeLeft
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of loopbacks for ethernet
ports for revision 2.1 on Nokia SAR series systems."
::= { aluPortGroups 13 }
aluExtPortEtherNwSchedulingGroup OBJECT-GROUP
OBJECTS {
aluExtPortEtherNwSchedulerMode
}
STATUS current
DESCRIPTION
"The group of objects supporting management of egress scheduling of
ports on Nokia SAR series systems."
::= { aluPortGroups 14 }
aluRS232MultiDropGroup OBJECT-GROUP
OBJECTS {
aluRS232MultiDrop
}
STATUS current
DESCRIPTION
"The group of objects supporting management of multi-drop data bridge
mode on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 15 }
aluPortDiscardStatsGroupV3v0 OBJECT-GROUP
OBJECTS { aluPortInL2AddrProtoDiscards,
aluPortInMPLSLabelDiscards,
aluPortInIPAddrProtoDiscards,
aluPortInVlanIdDiscards,
aluPortInHdlcCrcDiscards,
aluPortOutPortMtuDiscards,
aluPortInCsmQHiPriDiscards,
aluPortInCsmQMediumPriDiscards,
aluPortInCsmQLowPriDiscards,
aluPortOutCsmQDiscards,
aluPortInOtherDiscards,
aluPortOutOtherDiscards
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting retrieval of the detailed packet
discard statistics on Nokia SAR series systems"
::= { aluPortGroups 16 }
aluPortObsoletedGroupV3v0 OBJECT-GROUP
OBJECTS { aluPortInCsmQFtpPriDiscards
}
STATUS current
DESCRIPTION
"The group of objects obsoleted in the 7705 SAR series 3.0 release"
::= { aluPortGroups 17 }
aluPortNetControlStatsGroupV3v0 OBJECT-GROUP
OBJECTS { aluPortNetIngressControlFwdPkts,
aluPortNetIngressControlFwdOcts,
aluPortNetIngressControlDroPkts,
aluPortNetIngressControlDroOcts,
aluPortNetEgressControlFwdPkts,
aluPortNetEgressControlFwdOcts,
aluPortNetEgressControlDroPkts,
aluPortNetEgressControlDroOcts
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of ingress and egress control
traffic statistics in the Nokia SAR series 3.0 release"
::= { aluPortGroups 18 }
aluRS232SBitSignalingGroup OBJECT-GROUP
OBJECTS {
aluRS232SBitSignaling
}
STATUS current
DESCRIPTION
"The group of objects supporting management of S-bit signaling
mode on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 19 }
aluRS232DataPositionGroup OBJECT-GROUP
OBJECTS {
aluRS232DataPosition
}
STATUS current
DESCRIPTION
"The group of objects supporting management of S-bit signaling
mode on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 20 }
aluExtPortEtherLoopbackGroupV4v0 OBJECT-GROUP
OBJECTS {
aluExtPortEtherLoopback,
aluExtPortEtherLoopbackTimer,
aluExtPortEtherLoopbackTimeLeft,
aluExtPortEtherLoopbackCfmLbMode,
aluExtPortEtherCfmLbmRx,
aluExtPortEtherCfmLbmDropped,
aluExtPortEtherCfmLbrTx,
aluExtPortEtherLoopbackSwapMacAddr
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of loopbacks for ethernet
ports for revision 4.0 on Nokia SAR series systems."
::= { aluPortGroups 21 }
aluGponGroupV5v0 OBJECT-GROUP
OBJECTS {
aluGponPortG984SerialNumber,
aluGponPortSubsLocId,
aluGponPortActiveSwVersion,
aluGponPortPonStatus,
aluGponPortOntEnetStatus,
aluGponPortOntEnetSpeed
}
STATUS current
DESCRIPTION
"The group of objects supporting management of GPON ports
for revision 5.0 on Nokia SAR series systems."
::= { aluPortGroups 22 }
aluDslGroupV5v0 OBJECT-GROUP
OBJECTS {
aluDslPortBondingType,
aluDslPortBondingState,
aluDslPortBondingBitRateUS,
aluDslPortBondingBitRateDS,
aluDslPortAtmVpi,
aluDslPortAtmVci,
aluDslPortAtmF5OamLoopback,
aluDslPortAtmF5OamLoopbackStatus,
aluDslPortAtmF5OamLoopbackTime,
aluDslPortNtrDslLineID,
aluDslPortNtrLockedStatus,
aluDslPortNtrStdDev,
aluDslPortNtrMaxError,
aluDslPortNtrMinError,
aluDslPortAdsl2Plus,
aluDslPortNtrSampleClockPeriod,
aluDslPortNtrErrorHistory,
aluXdslLineOperState,
aluXdslLineState,
aluXdslLineProtocol,
aluXdslLineVdslProfile,
aluXdslLineTpsTcType,
aluXdslLineInBondingGroup,
aluXdslLineBitRateUS,
aluXdslLineSnrMarginUS,
aluXdslLineOutputPowerUS,
aluXdslLineRefPsdUS,
aluXdslLineLoopDelayUS,
aluXdslLineFailureUS,
aluXdslLineB0DelayUS,
aluXdslLineB0InpUS,
aluXdslLineBitRateDS,
aluXdslLineSnrMarginDS,
aluXdslLineOutputPowerDS,
aluXdslLineRefPsdDS,
aluXdslLineLoopDelayDS,
aluXdslLineFailureDS,
aluXdslLineB0DelayDS,
aluXdslLineB0InpDS,
aluXdslLineAdminState,
aluShdslLineDataRate,
aluShdslLineState,
aluShdslLineNegotiatedConst,
aluShdslLineUsedCaplist,
aluShdslLineRegion,
aluShdslLineCaplistMode,
aluShdslLineTpsTcType,
aluShdslLineInBondingGroup,
aluShdslLineAdminState,
aluShdslLineLineAttenuation,
aluShdslLineRxSNRMargin,
aluShdslLinePowerBackOffValue
}
STATUS current
DESCRIPTION
"The group of objects supporting management of DSL ports
for revision 5.0 on Nokia SAR series systems."
::= { aluPortGroups 23 }
aluGponStatsGroupV5v0 OBJECT-GROUP
OBJECTS {
aluGponPortCurrentLastUpdTime,
aluGponPortCurrentPMEnabled,
aluGponPortCurrentTxFrames,
aluGponPortCurrentRxFrames,
aluGponPortCurrentTxBytes,
aluGponPortCurrentRxBytes,
aluGponPortCurrentDropFrsUp,
aluGponPortCurrentDropFrsDn,
aluGponPortCurrentTxFrsMcast,
aluGponPortCurrentRxFrsMcast,
aluGponPortCurrentFCSEs,
aluGponPortCurrentECs,
aluGponPortCurrentLCs,
aluGponPortCurrentFTLs,
aluGponPortCurrentRBOs,
aluGponPortCurrentTBOs,
aluGponPortCurrentSCFs,
aluGponPortCurrentMCFs,
aluGponPortCurrentSQEs,
aluGponPortCurrentDTs,
aluGponPortCurrentIMTEs,
aluGponPortCurrentCSEs,
aluGponPortCurrentAEs,
aluGponPortCurrentIMREs,
aluGponPortCurrentLostFragsDn,
aluGponPortCurrentLostFragsUp,
aluGponPortCurrentRxFrags,
aluGponPortCurrentRxBlocks,
aluGponPortCurrentTxBlocks,
aluGponPortCurrentTxFrags,
aluGponPortCurrentBadHeaders,
aluGponPortPreviousLastUpdTime,
aluGponPortPreviousPMEnabled,
aluGponPortPreviousTxFrames,
aluGponPortPreviousRxFrames,
aluGponPortPreviousTxBytes,
aluGponPortPreviousRxBytes,
aluGponPortPreviousDropFrsUp,
aluGponPortPreviousDropFrsDn,
aluGponPortPreviousTxFrsMcast,
aluGponPortPreviousRxFrsMcast,
aluGponPortPreviousFCSEs,
aluGponPortPreviousECs,
aluGponPortPreviousLCs,
aluGponPortPreviousFTLs,
aluGponPortPreviousRBOs,
aluGponPortPreviousTBOs,
aluGponPortPreviousSCFs,
aluGponPortPreviousMCFs,
aluGponPortPreviousSQEs,
aluGponPortPreviousDTs,
aluGponPortPreviousIMTEs,
aluGponPortPreviousCSEs,
aluGponPortPreviousAEs,
aluGponPortPreviousIMREs,
aluGponPortPreviousLostFragsDn,
aluGponPortPreviousLostFragsUp,
aluGponPortPreviousRxFrags,
aluGponPortPreviousRxBlocks,
aluGponPortPreviousTxBlocks,
aluGponPortPreviousTxFrags,
aluGponPortPreviousBadHeaders
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of the GPON
statistics for revision 5.0 on Nokia SAR series
systems."
::= { aluPortGroups 24 }
aluDslStatsGroupV5v0 OBJECT-GROUP
OBJECTS {
aluXdslLineStatsNearEndFECS,
aluXdslLineStatsNearEndLOSS,
aluXdslLineStatsNearEndES,
aluXdslLineStatsNearEndSES,
aluXdslLineStatsNearEndUAS,
aluXdslLineStatsNearEndAS,
aluXdslLineStatsNearEndLOFS,
aluXdslLineStatsNearEndLPRS,
aluXdslLineStatsNearEndLEFTRS,
aluXdslLineStatsFarEndFECS,
aluXdslLineStatsFarEndLOSS,
aluXdslLineStatsFarEndES,
aluXdslLineStatsFarEndSES,
aluXdslLineStatsFarEndUAS,
aluXdslLineStatsFarEndAS,
aluXdslLineStatsFarEndLOFS,
aluXdslLineStatsFarEndLPRS,
aluXdslLineStatsFarEndLEFTRS,
aluXdslLineStatsFarEndLEFTRS,
aluXdslLineStatsUpTime,
aluShdslLineStatsLinkLoss,
aluShdslLineStatsCVError,
aluShdslLineStatsES,
aluShdslLineStatsSES,
aluShdslLineStatsLOSWS,
aluShdslLineStatsUAS,
aluShdslLineStatsInvalidDataFlag
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of the DSL Line
statistics for revision 5.0 on Nokia SAR series
systems."
::= { aluPortGroups 25 }
aluDslGponNotificationGroupV5v0 NOTIFICATION-GROUP
NOTIFICATIONS {
aluGponPortInbandAlarm,
aluGponPortInbandAlarmClear
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of
GPON ports for revision 5.0 on Nokia SAR series
systems."
::= { aluPortGroups 26 }
aluVoiceTeleprotectionGroup OBJECT-GROUP
OBJECTS {
aluVoicePortLineBalance,
aluVoicePortRingGeneration,
aluVoicePortSignalingType
}
STATUS current
DESCRIPTION
"The group of additional voice objects supporting the new Voice and
Teleprotection MDA introduced in Release 5.0 of the Nokia SAR
series systems."
::= { aluPortGroups 27 }
aluDataGroup OBJECT-GROUP
OBJECTS {
aluDataPortLastChangeTime,
aluDataPortType,
aluDataRowStatus,
aluDataLastChangeTime,
aluDataType,
aluDataClockSource,
aluDataTiming8k,
aluDataReportAlarm,
aluDataReportAlarmStatus,
aluDataLoopback,
aluDataChanGroupRowStatus,
aluDataChanGroupLastChangeTime,
aluDataChanGroupMTU,
aluDataChanGroupOperMTU,
aluDataChanGroupPayloadFillType,
aluDataChanGroupPayloadPattern,
aluDataChanGroupTimeSlots
}
STATUS current
DESCRIPTION
"The group of objects supporting management of TDM Data type ports
introduced in Release 5.0 of the Nokia SAR series systems."
::= { aluPortGroups 28 }
aluDataNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
aluEqPortDataAlarm,
aluEqPortDataAlarmClear,
aluDataLoopbackStarted,
aluDataLoopbackStopped
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of TDM Data type ports
introduced in Release 5.0 of the Nokia SAR series systems."
::= { aluPortGroups 29 }
aluPortCtlStatsGroup OBJECT-GROUP
OBJECTS {
aluPortAccessCtlInFwdPkts,
aluPortAccessCtlInFwdOcts,
aluPortAccessCtlInDroPkts,
aluPortAccessCtlInDroOcts,
aluPortAccessCtlEgrFwdPkts,
aluPortAccessCtlEgrFwdOcts,
aluPortAccessCtlEgrDroPkts,
aluPortAccessCtlEgrDroOcts
}
STATUS current
DESCRIPTION
"The group of objects supporting management of access port Control
packet statistics introduced in Release 5.0 of the Nokia
SAR series systems."
::= { aluPortGroups 30 }
aluFrStatsGroupV5v0 OBJECT-GROUP
OBJECTS {
aluFrIfRxFrames,
aluFrIfRxOctets,
aluFrIfRxDEFrames,
aluFrIfRxDEOctets,
aluFrIfRxFECNFrames,
aluFrIfRxBECNFrames,
aluFrIfTxFrames,
aluFrIfTxOctets,
aluFrIfTxDEFrames,
aluFrIfTxDEOctets,
aluFrIfTxFECNFrames,
aluFrIfTxBECNFrames,
aluFrIfRxDiscardsInvalidDlci,
aluFrIfRxLastInvalidDlci,
aluFrIfRxDiscardsCrcErrors,
aluFrIfRxDiscardsAlignmentErrors,
aluFrIfRxDiscardsLengthViolations,
aluFrIfRxDiscardsIllegalHeader,
aluFrIfRxDiscardsOtherErrors,
aluFrIfTxDiscardsUnderruns,
aluFrIfTxDiscardsOtherErrors,
aluExtFrCircuitReceivedCrcDiscards,
aluExtFrCircuitReceivedAborts,
aluExtFrCircuitReceivedOtherDiscards,
aluExtFrCircuitSentAborts,
aluExtFrCircuitSentFECNs,
aluExtFrCircuitSentBECNs,
aluExtFrCircuitReceivedDEOctets,
aluExtFrCircuitSentDEOctets
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of the frame relay
statistics for revision 5.0 on Nokia SAR series
systems."
::= { aluPortGroups 31 }
aluExtPortEtherSyncGroup OBJECT-GROUP
OBJECTS {
aluExtPortEtherAdminPhyTxClock,
aluExtPortEtherOperPhyTxClock
}
STATUS current
DESCRIPTION
"The group of objects supporting the management of the synchronous
Ethernet on copper interfaces."
::= { aluPortGroups 32 }
aluEthPtpTimestampStatsGroup OBJECT-GROUP
OBJECTS {
aluEthPtpInSyncPktTimestamped,
aluEthPtpOutSyncPktTimestamped,
aluEthPtpInDelReqPktTimestamped,
aluEthPtpOutDelReqPktTimestamped,
aluEthPtpInFcsErrorCount,
aluEthPtpOutFcsErrorCount
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting retrieval of the IEEE1588
PTP transparent clock statistic on Nokia SAR series systems"
::= { aluPortGroups 33 }
aluEthPtpTimestampGroup OBJECT-GROUP
OBJECTS {
aluEthPtpTimestampCapable,
aluEthPtpTimestampEnable,
aluEthPtpAsymmetry
}
STATUS current
DESCRIPTION
"The group of objects supporting management of IEEE1588 PTP
Transparent Clock function for ethernet ports on
Nokia SAR series systems."
::= { aluPortGroups 34 }
aluExtDS0ChanGroupSignalModeGroup OBJECT-GROUP
OBJECTS {
aluExtDS0ChanGroupSignalMode
}
STATUS current
DESCRIPTION
"The group of objects supporting signal mode for ds0 chan groups
Nokia SAR series systems."
::= { aluPortGroups 35 }
aluExtPortEtherLoopbackGroupV5v0 OBJECT-GROUP
OBJECTS {
aluExtPortEtherLoopback,
aluExtPortEtherLoopbackTimer,
aluExtPortEtherLoopbackTimeLeft,
aluExtPortEtherLoopbackCfmLbMode,
aluExtPortEtherCfmLbmRx,
aluExtPortEtherCfmLbmDropped,
aluExtPortEtherCfmLbrTx,
aluExtPortEtherLoopbackSwapMacAddr,
aluExtPortEtherLoopbackPersist
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of loopbacks for ethernet
ports for revision 5.0 on 7705 Nokia systems."
::= { aluPortGroups 36 }
aluPortEthernetGroupV6v0 OBJECT-GROUP
OBJECTS { aluPortEtherIngressRateCbs,
aluPortEtherIngressRateSrcPause,
aluPortEtherEgrUnshapedSapCir,
aluPortCfmLbVlanRowStatus,
aluExtPortEtherCfmLbVlanList
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of ethernet ports
on Nokia SAR series systems."
::= { aluPortGroups 37 }
aluPortDiscardStatsGroupV6v0 OBJECT-GROUP
OBJECTS { aluPortInL2AddrProtoDiscards,
aluPortInMPLSLabelDiscards,
aluPortInIPAddrProtoDiscards,
aluPortInVlanIdDiscards,
aluPortInHdlcCrcDiscards,
aluPortOutPortMtuDiscards,
aluPortInCsmQHiPriDiscards,
aluPortInCsmQMediumPriDiscards,
aluPortInCsmQLowPriDiscards,
aluPortOutCsmQDiscards,
aluPortInOtherDiscards,
aluPortOutOtherDiscards,
aluPortInHardPolicerDiscards
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of the detailed packet
discard statistics on Nokia SAR series systems"
::= { aluPortGroups 38 }
aluPortEtherXorGroupV6v0 OBJECT-GROUP
OBJECTS {
aluPortEtherXorMode,
aluPortEtherOperXorMode
}
STATUS current
DESCRIPTION
"The group of objects supporting management of XOR mode for ethernet
ports for revision 6.0 on 7705 Nokia systems."
::= { aluPortGroups 39 }
aluExtDS1E1SsmGroup OBJECT-GROUP
OBJECTS {
aluExtDS1E1Ssm,
aluExtDS1E1SsmTxDus,
aluExtE1SsmSaBit,
aluExtDs1E1TxSsmValue,
aluExtDs1E1RxSsmValue,
aluExtPortSsmTxQualityLevel
}
STATUS current
DESCRIPTION
"The group of objects supporting management of port that support
Synchronous Status Messages (SSM) on 7705 Nokia systems."
::= { aluPortGroups 40 }
aluPwrEthPortGroupV6v0 OBJECT-GROUP
OBJECTS {
aluExtPethPsePortFaultReason,
aluExtPethPsePortPowerLevel,
aluExtPethPsePortPowerConsumption,
aluExtPethPsePortMaximumPower
}
STATUS current
DESCRIPTION
"The group of objects supporting management of power ethernet
ports for revision 6.0 on 7705 Nokia systems."
::= { aluPortGroups 41 }
aluRS232HoldTimeGroup OBJECT-GROUP
OBJECTS {
aluRS232HoldTimeUp,
aluRS232HoldTimeDown
}
STATUS current
DESCRIPTION
"The group of objects supporting management of hold-time
capabilities on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 42 }
aluEthPtpTimestampStatsGroupV6v0 OBJECT-GROUP
OBJECTS {
aluEthPtpInSyncPktTimestamped,
aluEthPtpOutSyncPktTimestamped,
aluEthPtpInDelReqPktTimestamped,
aluEthPtpOutDelReqPktTimestamped
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of the IEEE1588
PTP transparent clock statistic on Nokia SAR series systems"
::= { aluPortGroups 43 }
aluVlanFilterPortGroup OBJECT-GROUP
OBJECTS {
aluExtPortEtherVlanFilter
}
STATUS current
DESCRIPTION
"The group of objects supporting management of VLAN filter
capabilities on Bridged Ethernet ports on Nokia SAR series systems."
::= { aluPortGroups 44 }
aluScadaBridgeGroupV6v1 OBJECT-GROUP
OBJECTS {
aluScadaBridgeType,
aluScadaBridgeAdminStatus,
aluScadaBridgeOperStatus,
aluScadaBridgeDescription,
aluSerialMddbReportAlarms,
aluSerialMddbForceActive,
aluSerialMddbSquelchStatus,
aluSerialMddbSquelchEnable,
aluSerialMddbSquelchTimeout,
aluSerialMddbSquelchReset,
aluSerialMddbSpeed,
aluScadaBranchRowStatus,
aluScadaBranchAdminStatus,
aluScadaBranchOperStatus,
aluScadaBranchMultiDrop,
aluScadaBranchAlarmStatus,
aluScadaBranchDescription,
aluScadaBranchEncapType,
aluScadaBranchMode
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of scada bridges
for version 6.1 on Nokia SAR series systems"
::= { aluPortGroups 45 }
aluExtPethPsePortNotificationGroupV6v0 NOTIFICATION-GROUP
NOTIFICATIONS {
aluExtPethPsePortStatusChange
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of
power ethernet Pse ports for revision 6.0 on Nokia SAR series
systems."
::= { aluPortGroups 46 }
aluPortNetRingGroupV6v0 OBJECT-GROUP
OBJECTS {
aluPortNetRingAddDropFwdInProfPkts,
aluPortNetRingAddDropFwdOutProfPkts,
aluPortNetRingAddDropFwdInProfOcts,
aluPortNetRingAddDropFwdOutProfOcts,
aluPortNetRingAddDropDroInProfPkts,
aluPortNetRingAddDropDroOutProfPkts,
aluPortNetRingAddDropDroInProfOcts,
aluPortNetRingAddDropDroOutProfOcts
}
STATUS current
DESCRIPTION
"The group of objects supporting port statistics specific to ring
Network Ports for revision 6.0 on 7705 Nokia systems."
::= { aluPortGroups 47 }
aluPortEtherQosGroupV6v0 OBJECT-GROUP
OBJECTS {
aluPortEtherIngressRateCbs,
aluPortEtherIngressRateSrcPause,
aluPortEtherEgrUnshapedSapCir
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ethernet ports
on Nokia SAR series systems."
::= { aluPortGroups 48 }
aluPortEtherLoopbackGroupV6v0 OBJECT-GROUP
OBJECTS {
aluExtPortEtherLoopback,
aluExtPortEtherLoopbackTimer,
aluExtPortEtherLoopbackTimeLeft,
aluExtPortEtherLoopbackCfmLbMode,
aluExtPortEtherCfmLbmRx,
aluExtPortEtherCfmLbmDropped,
aluExtPortEtherCfmLbrTx,
aluExtPortEtherLoopbackSwapMacAddr,
aluExtPortEtherLoopbackPersist,
aluExtPortEtherCfmLbVlanList
}
STATUS current
DESCRIPTION
"The group of objects supporting management of loopbacks for ethernet
ports for revision 6.0 on 7705 Nokia systems."
::= { aluPortGroups 49 }
aluScadaBridgeNotificationGroupV6v1 NOTIFICATION-GROUP
NOTIFICATIONS {
aluSerialMddbSquelchStatusChanged,
aluSerialMddbSquelchResetIssued
}
STATUS obsolete
DESCRIPTION
"The group of notifications supporting the management of
scada bridges for revision 6.1 on Nokia SAR series
systems."
::= { aluPortGroups 50 }
aluPortEtherQosGroupV6v1 OBJECT-GROUP
OBJECTS {
aluExtPortEtherAccEgrShaper,
aluExtPortEtherNetEgrShaper,
aluPortEtherEgrUnshapedNwIfCir
}
STATUS current
DESCRIPTION
"The group of objects supporting QOS management of ethernet ports
on Nokia SAR series systems."
::= { aluPortGroups 51 }
aluGnssPortGroup OBJECT-GROUP
OBJECTS {
aluGnssPortLastChangeTime,
aluGnssPortType,
aluGnssPortAntennaCableDelay,
aluGnssPortElevationMaskAngle,
aluGnssPortVisibleSatelliteCount,
aluGnssPortUsedSatelliteCount,
aluGnssPortAntennaStatus,
aluGnssPortSyncStatus,
aluGnssPortPositionLatitude,
aluGnssPortPositionLongitude,
aluGnssPortPositionAltitude,
aluGnssPortDateAndTime,
aluGnssPortReceiverStatus,
aluGnssPortCurUtcOffset,
aluGnssPortCurUtcOffsetValid
}
STATUS current
DESCRIPTION
"The group of objects supporting management of GNSS type ports
on Nokia SAR series systems."
::= { aluPortGroups 52 }
aluPortDiscardStatsGroupV6v1 OBJECT-GROUP
OBJECTS {
aluPortInL2MacDADiscards,
aluPortInL2ETypeDiscards
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of the detailed packet
discard statistics for revision 6.1 on Nokia SAR series systems"
::= { aluPortGroups 53 }
aluPortObsoleteGroupV6v0 OBJECT-GROUP
OBJECTS {
aluEthPtpInFcsErrorCount,
aluEthPtpOutFcsErrorCount,
aluPortCfmLbVlanId,
aluPortCfmLbVlanRowStatus
}
STATUS current
DESCRIPTION
"The group of objects obsoleted in the 7705 SAR series 6.0 release"
::= { aluPortGroups 54 }
aluDataPortNotifyObjsGroup OBJECT-GROUP
OBJECTS { aluPortNotifyDataAlarmReason
}
STATUS current
DESCRIPTION
"The group of objects supporting TDM Data type port notifications
introduced for release 5.0 on Nokia SAR series systems."
::= { aluPortGroups 55 }
aluGnssPortNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
aluGnssPortStatusChange
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of GNSS ports
for revision 6.1 on Nokia SAR series systems."
::= { aluPortGroups 56 }
aluScadaBridgeGroupV7v1 OBJECT-GROUP
OBJECTS {
aluScadaBridgeType,
aluScadaBridgeAdminStatus,
aluScadaBridgeOperStatus,
aluScadaBridgeDescription,
aluSerialMddbReportAlarms,
aluSerialMddbForceActive,
aluSerialMddbSquelchStatus,
aluSerialMddbSquelchEnable,
aluSerialMddbSquelchTimeout,
aluSerialMddbSquelchReset,
aluSerialMddbSpeed,
aluSerialMddbSquelchResetMode,
aluSerialMddbSquelchResetTimeout,
aluSerialMddbRedMode,
aluPcmForceActive,
aluPcmSquelchStatus,
aluPcmSquelchEnable,
aluPcmSquelchTimeout,
aluPcmSquelchReset,
aluPcmSquelchResetMode,
aluPcmSquelchResetTimeout,
aluPcmRedMode,
aluScadaBranchRowStatus,
aluScadaBranchAdminStatus,
aluScadaBranchOperStatus,
aluScadaBranchMultiDrop,
aluScadaBranchAlarmStatus,
aluScadaBranchDescription,
aluScadaBranchEncapType,
aluScadaBranchMode
}
STATUS current
DESCRIPTION
"The group of objects supporting management of scada bridges
for version 6.1 on Nokia SAR series systems"
::= { aluPortGroups 57 }
aluScadaBridgeNotificationGroupV7v1 NOTIFICATION-GROUP
NOTIFICATIONS {
aluSerialMddbSquelchStatusChanged,
aluSerialMddbSquelchResetIssued,
aluPcmSquelchStatusChanged,
aluPcmSquelchResetIssued
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of
scada bridges for revision 7.0 on Nokia SAR series
systems."
::= { aluPortGroups 58 }
aluExtDS1PortLineEncodingGroup OBJECT-GROUP
OBJECTS { aluExtDS1PortLineEncoding
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the line encoding
of DS1/E1 physical ports on Nokia SAR series systems."
::= { aluPortGroups 59 }
aluPortCemStatsGroup OBJECT-GROUP
OBJECTS { aluPortCemStatsEgressSamplingDoneCnt,
aluPortCemStatsEgressAdjustDoneCnt
}
STATUS current
DESCRIPTION
"The group of objects which provides 7705 specific cem stats."
::= { aluPortGroups 60 }
aluRS232ControlLeadsSignalGroup OBJECT-GROUP
OBJECTS {
aluRS232ControlLeadsSignal
}
STATUS current
DESCRIPTION
"The group of objects supporting management of control lead signals
on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 61 }
aluPortEtherQosGroupV7v1 OBJECT-GROUP
OBJECTS {
aluExtPortEtherEgrRateIncludeFCS
}
STATUS current
DESCRIPTION
"The group of objects supporting QOS management of ethernet ports
for revision 7.0 on Nokia SAR series systems."
::= { aluPortGroups 62 }
aluRS232ControlLeadsNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
aluRS232ControlLeadsSignalChange
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of Serial control
leads on Nokia SAR series systems."
::= { aluPortGroups 63 }
aluRS232ControlLeadsNotifObjsGroup OBJECT-GROUP
OBJECTS { aluPortNotifyRS232ControlLeadsSignalChange
}
STATUS current
DESCRIPTION
"The group of objects supporting Serial control leads notifications
introduced for release 7.0 on Nokia SAR series systems."
::= { aluPortGroups 64 }
aluRS232ControlLeadsMonGroup OBJECT-GROUP
OBJECTS {
aluRS232ControlLeadMonDtrDsr,
aluRS232ControlLeadMonRtsDcdC,
aluRS232ControlLeadMonAlbCts,
aluRS232ControlLeadMonRdlRi
}
STATUS current
DESCRIPTION
"The group of objects supporting management of monitoring control leads
on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 65 }
aluRS232SocketGroup OBJECT-GROUP
OBJECTS {
aluRS232SocketRowStatus,
aluRS232SocketLastChangeTime,
aluRS232SocketEopLength,
aluRS232SocketEopIdleTimeout,
aluRS232SocketEopSpecialChar,
aluRS232SocketSquelchDelay,
aluRS232SocketUnsquelchDelay,
aluRS232SocketInterSessionDelay,
aluRS232SocketSquelchStatus,
aluRS232SocketSquelchReset
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Serial socket channels
on Nokia SAR series systems."
::= { aluPortGroups 66 }
aluRS232SocketNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
aluRS232SquelchStatusChange,
aluRS232SquelchResetIssued
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of Serial socket
channels on Nokia SAR series systems."
::= { aluPortGroups 67 }
aluDot1xAuthGroup OBJECT-GROUP
OBJECTS {
aluDot1xAuthMacAuthEnabled,
aluDot1xAuthMacAuthWait,
aluDot1xAuthLastAuthMethod,
aluDot1xAuthMacAuthFramesRx
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Mac-Based Authentication
on Nokia SAR series systems."
::= { aluPortGroups 68 }
aluRS232SocketStatsGroup OBJECT-GROUP
OBJECTS {
aluRS232SocketRxChars,
aluRS232SocketTxChars,
aluRS232SocketEopIdleTimeoutCnt,
aluRS232SocketEopLengthCnt,
aluRS232SocketEopSpecialCharCnt,
aluRS232SocketIngrForwardedPkts,
aluRS232SocketEgrForwardedPkts,
aluRS232SocketIngrDroppedPkts,
aluRS232SocketEgrDroppedPkts,
aluRS232SocketSquelchCnt
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of the detailed
RS232Socket statistics on Nokia SAR series systems."
::= { aluPortGroups 69 }
aluGnssPortReceiverFwVersGroup OBJECT-GROUP
OBJECTS {
aluGnssPortReceiverFwVersion
}
STATUS current
DESCRIPTION
"The group of objects supporting retrieval of the version of firmware
running on a particular GNSS receiver module on Nokia SAR series
systems."
::= { aluPortGroups 70 }
aluScadaVcbGroup OBJECT-GROUP
OBJECTS {
aluScadaVcbIdleCode,
aluScadaVcbSeizedCode,
aluScadaVcbSignalMode
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SCADA VCBs on Nokia SAR
series systems."
::= { aluPortGroups 71 }
aluScadaBranchGainGroup OBJECT-GROUP
OBJECTS {
aluScadaBranchGainInput,
aluScadaBranchGainOutput,
aluScadaBranchGainSidetoneEnable
}
STATUS current
DESCRIPTION
"The group of objects supporting management of signal gain on SCADA
branches on Nokia SAR series systems."
::= { aluPortGroups 72 }
aluPortEtherQosGroupV8v1 OBJECT-GROUP
OBJECTS {
aluExtPortEtherBnAllowed,
aluExtPortEtherBnHoldTime,
aluExtPortEtherBnEgressRateInUse,
aluExtPortEtherBnLastRateChangeTime,
aluExtPortEtherBnLastMgsRxTime,
aluExtPortEtherBnNumRateChanges,
aluExtPortEtherBnNumMsgRx,
aluExtPortEtherBnNumInvalidMsgRx,
aluExtPortEtherBnNumBWOutOfRange
}
STATUS current
DESCRIPTION
"The group of objects supporting QOS management of ethernet ports
for revision 8.0 on Nokia SAR series systems."
::= { aluPortGroups 73 }
aluPortLsrIpLoadBalGroupV8v0 OBJECT-GROUP
OBJECTS {
aluLsrIpLoadBalBtmOfStk,
aluLsrIpLoadBalIngressPort
}
STATUS current
DESCRIPTION
"The group of objects supporting management of lsr load balancing
on Alcatel-Lucent SAR series systems"
::= { aluPortGroups 74 }
aluRS232ClockSyncGroup OBJECT-GROUP
OBJECTS {
aluRS232ClockSyncState,
aluRS232ClockMasterPortId
}
STATUS current
DESCRIPTION
"The group of objects supporting clock synchronization objects
on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 75 }
aluRS232ClockSyncNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
aluRS232ClockSyncStateChange
}
STATUS current
DESCRIPTION
"The group of notifications supporting clock synchronization objects
on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 76 }
aluRS232InvertClockGroup OBJECT-GROUP
OBJECTS {
aluRS232InvertClock
}
STATUS current
DESCRIPTION
"The group of objects supporting clock inversion objects
on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 77 }
aluPortEtherObsoleteV9v0Group OBJECT-GROUP
OBJECTS { aluEthPtpAsymmetry
}
STATUS obsolete
DESCRIPTION
"The objects which were obsoleted for revision 9.0 on Nokia
7705 SROS series systems."
::= { aluPortGroups 78 }
aluRS232MonClockDataGroup OBJECT-GROUP
OBJECTS {
aluRS232MonClockDeviationRaise,
aluRS232MonClockDeviationClear,
aluRS232MonDataInactivityRaise,
aluRS232MonDataInactivityClear
}
STATUS current
DESCRIPTION
"The group of objects supporting monitor of clock and data faults
on Serial type ports on Nokia SAR series systems."
::= { aluPortGroups 79 }
aluScadaNameGroup OBJECT-GROUP
OBJECTS {
aluScadaBridgeName,
aluScadaBranchName
}
STATUS current
DESCRIPTION
"The group of objects supporting names of Scada entities on
Nokia SAR series systems."
::= { aluPortGroups 80 }
aluExtDS0ChanGroupLoopbackGroup OBJECT-GROUP
OBJECTS {
aluExtDS0ChanGroupLoopback
}
STATUS current
DESCRIPTION
"The group of objects supporting loopbacks on DS0 channel groups on
Nokia SAR series systems."
::= { aluPortGroups 81 }
aluExtDS0ChanGrpLpbckNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
aluExtDS0ChanGrpLoopbackStarted,
aluExtDS0ChanGrpLoopbackStopped
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of DS0 channel group
loopbacks on Nokia SAR series systems."
::= { aluPortGroups 82 }
aluPortNgeGroup OBJECT-GROUP
OBJECTS {
aluPortNgeL2KeygroupTxFrames,
aluPortNgeL2KeygroupTxBytes,
aluPortNgeL2KeygroupRxFrames,
aluPortNgeL2KeygroupRxBytes,
aluPortNgeL2KGRxDropOtherFrames,
aluPortNgeL2KGRxDropOtherBytes,
aluPortNgeL2KeygroupTxDropFrames,
aluPortNgeL2KeygroupTxDropBytes,
aluPortNgeL2KGRxDrpInvldSpiFrms,
aluPortNgeL2KGRxDrpInvldSpiBytes
}
STATUS current
DESCRIPTION
"The group of objects supporting group encryption stats on a port."
::= { aluPortGroups 83 }
aluPortPtpTimestampStatsV9v0Group OBJECT-GROUP
OBJECTS {
aluEthPtpOutFollowUpPktTimestamped
}
STATUS current
DESCRIPTION
"The group was introduced in release 9 of Nokia SAR series systems to support
management of the PTP IPv6 two-step functionality."
::= { aluPortGroups 84 }
END
View Git Blame Copy Permalink