1031 lines
33 KiB
Plaintext
1031 lines
33 KiB
Plaintext
NETI-TRUNK-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter64, IpAddress,
|
|
Unsigned32, Integer32, Gauge32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, TimeStamp, TruthValue, RowPointer
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
netiGeneric
|
|
FROM NETI-COMMON-MIB;
|
|
|
|
netiTrunkMIB MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"201403140800Z"
|
|
ORGANIZATION
|
|
"Net Insight AB"
|
|
CONTACT-INFO
|
|
"Net Insight AB
|
|
Box 42093
|
|
SE-126 14 Stockholm
|
|
Sweden
|
|
Tel +46-8-685 0400
|
|
info@netinsight.se"
|
|
DESCRIPTION
|
|
"MIB for DTM network links (trunks). DTM trunks provide
|
|
transport of DTM data between two DTM networks nodes. The
|
|
MIB currently includes the DPP-IP group (neti-dppip),
|
|
providing management of DPP-IP encapsulated DTM over
|
|
IP/Ethernet. It includes configuration information and
|
|
status."
|
|
|
|
REVISION
|
|
"201403140800Z"
|
|
DESCRIPTION
|
|
"Extended draft. This revision is preliminary. Read-write
|
|
objects have been added to give full managablity to the
|
|
interfaces in the DPP-IP group. Values that limits the
|
|
configuration of the local DPP-IP interfaces have been
|
|
introduced in the dppipLimitsTable. Similarly, limits of the
|
|
peer DPP-IP interfaces have been added in the
|
|
dppipPeerLimitsTable."
|
|
|
|
REVISION
|
|
"201308291600Z"
|
|
DESCRIPTION
|
|
"Extended draft. This revision is preliminary. The
|
|
dppipDelayVar01 object has been added to dppipEntry. All
|
|
objects in the MIB are read-only."
|
|
|
|
REVISION
|
|
"201301241500Z"
|
|
DESCRIPTION
|
|
"Extended draft. This revision is preliminary. More objects
|
|
have been added to dppipEntry to make the configuration
|
|
information and status more complete. All objects in the MIB
|
|
are read-only."
|
|
|
|
REVISION
|
|
"200908261500Z"
|
|
DESCRIPTION
|
|
"Draft. This revision is preliminary. Future revisions are
|
|
likely to be incompatible with this revision."
|
|
|
|
::= { netiGeneric 3 }
|
|
|
|
trunkObjects OBJECT IDENTIFIER ::= { netiTrunkMIB 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Groups in the NETI-TRUNK-MIB
|
|
-- -------------------------------------------------------------
|
|
|
|
dppipGroup OBJECT IDENTIFIER ::= { trunkObjects 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
FecMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of operation of the Forward Error Correction
|
|
function (FEC). The FEC function may be not used (fecNone),
|
|
used for column correction (fec1D) or used for both row and
|
|
column correction (fec2D)."
|
|
SYNTAX INTEGER {
|
|
fecNone(1),
|
|
fec1D(2),
|
|
fec2D(3)
|
|
}
|
|
|
|
DppipSupport ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1d.1d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the support of a specific DPP-IP function:
|
|
|
|
octet contents
|
|
1 major version
|
|
2 minor version
|
|
|
|
Any minor version N.x includes support for any minor version
|
|
M.y with major version M<N. Minor version N.n includes
|
|
support for any minor version N.m with the same major version
|
|
N and m<n."
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The DPP-IP group
|
|
-- -------------------------------------------------------------
|
|
|
|
dppipNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DPP-IP interfaces (regardless of their current
|
|
state) present on this system."
|
|
::= { dppipGroup 1 }
|
|
|
|
dppipLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when status or configuration of any
|
|
the objects in the dppipTable was last changed."
|
|
::= { dppipGroup 2 }
|
|
|
|
-- The DPP-IP table
|
|
|
|
-- The DPP-IP table contains information on the system's
|
|
-- DPP-IP interfaces. Each interface is thought of as being
|
|
-- attached to a `physical layer interface'.
|
|
|
|
dppipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DppipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of DPP-IP interface entries. The number of entries is
|
|
given by the value of dppipNumber. The following objects
|
|
need to be written simultaneously, i.e. as a single write
|
|
operation, while dppipAdminStatus is `up': dppipTxSlots,
|
|
dppipMtu, dppipTxFecMode, dppipTxFecRows, dppipTxFecCols "
|
|
::= { dppipGroup 3 }
|
|
|
|
dppipEntry OBJECT-TYPE
|
|
SYNTAX DppipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DPP-IP interface entry containing objects at the subnetwork
|
|
layer and below for a particular interface."
|
|
INDEX { dppipIndex }
|
|
::= { dppipTable 1 }
|
|
|
|
DppipEntry ::= SEQUENCE {
|
|
dppipIndex Unsigned32,
|
|
dppipName SnmpAdminString,
|
|
dppipAddress IpAddress,
|
|
dppipNetMask IpAddress,
|
|
dppipDefaultGateway IpAddress,
|
|
dppipPeerAddress IpAddress,
|
|
dppipTxSlots Unsigned32,
|
|
dppipTxUsedCapacity Gauge32,
|
|
dppipRxSlots Gauge32,
|
|
dppipRxUsedCapacity Gauge32,
|
|
dppipDelayVariation Unsigned32,
|
|
dppipOperStatus INTEGER,
|
|
dppipFailure SnmpAdminString,
|
|
dppipReceivedFrames Counter64,
|
|
dppipMissingFrames Counter64,
|
|
dppipDeliveredFrames Counter64,
|
|
dppipDroppedFrames Counter64,
|
|
dppipDuplicateFrames Counter64,
|
|
dppipReorderedFrames Counter64,
|
|
dppipLostFrames Counter64,
|
|
dppipRecoveredFrames Counter64,
|
|
dppipSentFrames Counter64,
|
|
dppipDelayVarPtp Unsigned32,
|
|
dppipDelayVar999 Unsigned32,
|
|
dppipAdminStatus INTEGER,
|
|
dppipVlan Integer32,
|
|
dppipDelayVar01 Unsigned32,
|
|
dppipPrio Unsigned32,
|
|
dppipPhysIf RowPointer,
|
|
dppipMtu Unsigned32,
|
|
dppipTtl Unsigned32,
|
|
dppipDscp Unsigned32,
|
|
dppipRxSlotsPerFrame Unsigned32,
|
|
dppipAvailTxSlots Gauge32,
|
|
dppipAvailRxSlots Gauge32,
|
|
dppipMinUsageRatio Unsigned32,
|
|
dppipTxTranspSlots Gauge32,
|
|
dppipRxTranspSlots Gauge32,
|
|
dppipNomDTDelay Unsigned32,
|
|
dppipTxFecMode FecMode,
|
|
dppipTxFecRows Unsigned32,
|
|
dppipTxFecCols Unsigned32,
|
|
dppipRxFecMode FecMode,
|
|
dppipRxFecRows Unsigned32,
|
|
dppipRxFecCols Unsigned32,
|
|
dppipCntControl Integer32,
|
|
dppipSuppressAlarms TruthValue,
|
|
dppipSigFailFilter Unsigned32,
|
|
dppipDegThreshold Unsigned32,
|
|
dppipDegPeriod Unsigned32,
|
|
dppipTolJitter Unsigned32 }
|
|
|
|
dppipIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value greater than zero that is unique for each DPP-IP
|
|
interface. The value for each DPP-IP interface must remain
|
|
constant at least from one re-initialization of the entity's
|
|
network management system to the next re-initialization."
|
|
::= { dppipEntry 1 }
|
|
|
|
dppipName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual name of the interface. The value of this object
|
|
should be the name of the DPP-IP interface as assigned by the
|
|
local device."
|
|
::= { dppipEntry 2 }
|
|
|
|
dppipAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv4 address of the DPP-IP interface."
|
|
::= { dppipEntry 3 }
|
|
|
|
dppipNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask associated with the IP address of DPP-IP
|
|
interface. The value of the mask is an IP address with all
|
|
the network bits set to 1 and all the hosts bits set to 0."
|
|
::= { dppipEntry 4 }
|
|
|
|
dppipDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv4 address of the default gateway. Packets addressed to
|
|
a destination outside the subnet of the DPP-IP interface are
|
|
by default routed to this gateway. "
|
|
::= { dppipEntry 5 }
|
|
|
|
dppipPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv4 address of the peer DPP-IP interface at the remote
|
|
end of the DTM trunk."
|
|
::= { dppipEntry 6 }
|
|
|
|
dppipTxSlots OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current transmit side capacity in
|
|
slots per DTM frame."
|
|
::= { dppipEntry 7 }
|
|
|
|
dppipTxUsedCapacity OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An estimate of the transmit side physical layer capacity used
|
|
by the DPP-IP interface in bits per second. It represents a
|
|
minimum required capacity along the network path."
|
|
::= { dppipEntry 8 }
|
|
|
|
dppipRxSlots OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current receive side
|
|
capacity in slots per DTM frame."
|
|
::= { dppipEntry 9 }
|
|
|
|
dppipRxUsedCapacity OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An estimate of the receive side physical layer capacity used
|
|
by the DPP-IP interface in bits per second. It represents a
|
|
minimum required capacity along the network path."
|
|
::= { dppipEntry 10 }
|
|
|
|
dppipDelayVariation OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RMS (i.e. standard deviation) value of the DPP-IP path
|
|
delay variation in ns. This value represents a momentary
|
|
snapshot of the delay variation."
|
|
::= { dppipEntry 11 }
|
|
|
|
dppipOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass data
|
|
down(2),
|
|
testing(3), -- in some test mode
|
|
unknown(4),
|
|
dormant(5),
|
|
notPresent(6),
|
|
lowerLayerDown(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the interface. The
|
|
testing(3) state indicates that no operational frames can be
|
|
passed."
|
|
::= { dppipEntry 12 }
|
|
|
|
dppipFailure OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string describing a fault status on the DPP-IP
|
|
interface. The object presents an empty string if there are
|
|
no faults on the interface."
|
|
::= { dppipEntry 13 }
|
|
|
|
dppipReceivedFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of DPP-IP frames that have been received."
|
|
::= { dppipEntry 14 }
|
|
|
|
dppipMissingFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DPP-IP frames that were missing in the frame
|
|
sequence, i.e. the expected sequence numbers were not found
|
|
in the DPP-IP framing buffer."
|
|
::= { dppipEntry 15 }
|
|
|
|
dppipDeliveredFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of DPP-IP data frames that have been
|
|
delivered to the DTM interface."
|
|
::= { dppipEntry 16 }
|
|
|
|
dppipDroppedFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DPP-IP frames that have been received and have
|
|
not been processed since the interface was unable to align
|
|
them to the DPP-IP frame sequence."
|
|
::= { dppipEntry 17 }
|
|
|
|
dppipDuplicateFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DPP-IP frames that were received with a
|
|
sequence number of an already processed DPP-IP frame."
|
|
::= { dppipEntry 18 }
|
|
|
|
dppipReorderedFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DPP-IP frames that were received out
|
|
of order, but could still be aligned to the DPP-IP
|
|
frame sequence."
|
|
::= { dppipEntry 19 }
|
|
|
|
dppipLostFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of missing DPP-IP data frames that could not be
|
|
delivered to the DTM interface."
|
|
::= { dppipEntry 20 }
|
|
|
|
dppipRecoveredFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of missing DPP-IP data frames that were recovered
|
|
by the FEC procedure."
|
|
::= { dppipEntry 21 }
|
|
|
|
dppipSentFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of DPP-IP frames that have been sent."
|
|
::= { dppipEntry 22 }
|
|
|
|
dppipDelayVarPtp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The point-to-point value of the DPP-IP path delay variation
|
|
in nanoseconds. The special value 0 means that the
|
|
measurement is incomplete"
|
|
::= { dppipEntry 23 }
|
|
|
|
dppipDelayVar999 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 99.9 percentile value of the DPP-IP path delay variation
|
|
given in nanoseconds. The special value 0 means that the
|
|
measurement is incomplete."
|
|
::= { dppipEntry 24 }
|
|
|
|
dppipAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- supposed to pass data
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired state of the interface."
|
|
::= { dppipEntry 25 }
|
|
|
|
dppipVlan OBJECT-TYPE
|
|
SYNTAX Integer32(-1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN identity associated to the DPP-IP interface. The
|
|
value 0 indicates that the DPP-IP interface does not belong
|
|
to a VLAN. The value -1 indicates that Ethernet frames from
|
|
the DPP-IP interface are not tagged. "
|
|
::= { dppipEntry 26 }
|
|
|
|
dppipDelayVar01 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 0.1 percentile value of the DPP-IP path delay variation
|
|
given in nanoseconds. The special value 0 means that the
|
|
measurement is incomplete."
|
|
::= { dppipEntry 27 }
|
|
|
|
dppipPrio OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ethernet priority for frames sent from the DPP-IP
|
|
interface. Ignored if frames are untagged (i.e. dppipVlan
|
|
is -1)."
|
|
::= { dppipEntry 28 }
|
|
|
|
dppipPhysIf OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A reference to an object representing the physical interface
|
|
that supports the DPP-IP interface. The special value .0.0
|
|
is used, when no such reference is available."
|
|
::= { dppipEntry 29 }
|
|
|
|
dppipMtu OBJECT-TYPE
|
|
SYNTAX Unsigned32(64..1500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maximum Transmission Unit of the DPP-IP interface,
|
|
i.e. the maximum size of the DPP-IP payload, including IP
|
|
header, UDP header and DPP-IP header."
|
|
::= { dppipEntry 30 }
|
|
|
|
dppipTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Time To Live of frames sent at the DPP-IP interface.
|
|
This value is set in the IP header."
|
|
::= { dppipEntry 31 }
|
|
|
|
dppipDscp OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Differential Services Coding Point of frames sent at the
|
|
DPP-IP interface. This value is set in the IP header."
|
|
::= { dppipEntry 32 }
|
|
|
|
dppipRxSlotsPerFrame OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of DTM slots per received DPP-IP data frame."
|
|
::= { dppipEntry 33 }
|
|
|
|
dppipAvailTxSlots OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum transmit slot rate (slots/frame) that can be
|
|
allocated at the DTM switch."
|
|
::= { dppipEntry 34 }
|
|
|
|
dppipAvailRxSlots OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum receive slot rate (slots/frame) that can be
|
|
allocated at the DTM switch."
|
|
::= { dppipEntry 35 }
|
|
|
|
dppipMinUsageRatio OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum allowed usage ratio (used slots/configured
|
|
slots) in per-mille, when dynamic trunk functionality is
|
|
used. 1000 is default and indicates that the Dynamic Trunk
|
|
function is disabled.
|
|
|
|
Requires Dynamic Trunk function support equal to 1.1 or
|
|
higher."
|
|
::= { dppipEntry 36 }
|
|
|
|
dppipTxTranspSlots OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current transmit side capacity in
|
|
slots per DTM frame that is actually transported over
|
|
the. When Dynamic Trunk functionality is disabled this is
|
|
equal to dppipTxSlots. When Dynamic Trunk functionality is
|
|
enabled this is less or equal to dppipTxSlots, since slots
|
|
that are not used by any channel need not be transported.
|
|
|
|
Requires Dynamic Trunk function support equal to 1.1 or
|
|
higher."
|
|
::= { dppipEntry 37 }
|
|
|
|
dppipRxTranspSlots OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current receive side capacity in
|
|
slots per DTM frame that is actually transported. When
|
|
Dynamic Trunk functionality is disabled this is equal to
|
|
dppipRxSlots. When Dynamic Trunk functionality is enabled
|
|
this is less or equal to dppipRxSlots, since slots that are
|
|
not used by any channel need not be transported.
|
|
|
|
Requires Dynamic Trunk function support equal to 1.1 or
|
|
higher."
|
|
::= { dppipEntry 38 }
|
|
|
|
dppipNomDTDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The nominal extra delay in ns when the Dynamic Trunk
|
|
function is enabled.
|
|
|
|
Requires Dynamic Trunk function support equal to 1.1 or
|
|
higher."
|
|
::= { dppipEntry 39 }
|
|
|
|
dppipTxFecMode OBJECT-TYPE
|
|
SYNTAX FecMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current mode of operation of the
|
|
transmit side Forward Error Correction function (FEC). The
|
|
FEC function may be not used (fecNone), used for column
|
|
correction (fec1D) or used for both row and column correction
|
|
(fec2D)."
|
|
::= { dppipEntry 40 }
|
|
|
|
dppipTxFecRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current number of data rows in the
|
|
transmit side Forward Error Correction (FEC) matrix. This
|
|
object is not applicable when dppipTxFecMode is fecNone."
|
|
::= { dppipEntry 41 }
|
|
|
|
dppipTxFecCols OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current number of data columns in the
|
|
transmit side Forward Error Correction (FEC) matrix. This
|
|
object is not applicable when dppipTxFecMode is fecNone."
|
|
::= { dppipEntry 42 }
|
|
|
|
dppipRxFecMode OBJECT-TYPE
|
|
SYNTAX FecMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current mode of operation of the
|
|
receive side Forward Error Correction function (FEC). The FEC
|
|
function may be not used (fecNone), used for column
|
|
correction (fec1D) or used for both row and column correction
|
|
(fec2D)."
|
|
::= { dppipEntry 43 }
|
|
|
|
dppipRxFecRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current number of data rows in the
|
|
receive side Forward Error Correction (FEC) matrix. This
|
|
object is not applicable when dppipRxFecMode is fecNone."
|
|
::= { dppipEntry 44 }
|
|
|
|
dppipRxFecCols OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's current number of data columns in the
|
|
receive side Forward Error Correction (FEC) matrix. This
|
|
object is not applicable when dppipRxFecMode is fecNone."
|
|
::= { dppipEntry 45 }
|
|
|
|
dppipCntControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1) -- reset statistics counters
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the statistics counter monitoring. The statistics
|
|
monitoring is restarted and all counters set to 0, by writing
|
|
`reset' to this object."
|
|
::= { dppipEntry 46 }
|
|
|
|
dppipSuppressAlarms OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Suppression control for alarms from the DPP-IP interface.
|
|
When set to `true', all alarms are suppressed."
|
|
::= { dppipEntry 47 }
|
|
|
|
dppipSigFailFilter OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..2000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal fail filter hold-off time in milliseconds. Trail
|
|
Signal Fail conditions must be persistent during the hold-off
|
|
time, before operStatus is changed from `up' to `down'."
|
|
::= { dppipEntry 48 }
|
|
|
|
dppipDegThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..8000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The detection threshold for DEG alarm. A bad second is
|
|
declared when the number of errored blocks is equal to or
|
|
greater than the threshold, otherwise a good second is
|
|
declared. Default is 1200"
|
|
::= { dppipEntry 49 }
|
|
|
|
dppipDegPeriod OBJECT-TYPE
|
|
SYNTAX Unsigned32(2..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The persistence time for detection of DEG alarm as the number
|
|
of consecutive seconds with changed status (bad or good)
|
|
before the alarm is set or cleared."
|
|
::= { dppipEntry 50 }
|
|
|
|
dppipTolJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tolerated jitter and wander of the DPP-IP interface given
|
|
in microseconds."
|
|
::= { dppipEntry 51 }
|
|
|
|
-- End of DPP-IP table
|
|
|
|
|
|
-- The DPP-IP limits table
|
|
|
|
-- The DPP-IP limits table contains information on the system's
|
|
-- DPP-IP interfaces. The table contains limits that may
|
|
-- change due to configuration changes during the uptime of the interface.
|
|
|
|
dppipLimitsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DppipLimitsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of DPP-IP interface limits entries. The number of
|
|
entries is given by the value of dppipNumber."
|
|
::= { dppipGroup 4 }
|
|
|
|
dppipLimitsEntry OBJECT-TYPE
|
|
SYNTAX DppipLimitsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DPP-IP interface limits entry containing limits for a
|
|
particular interface."
|
|
INDEX { dppipIndex }
|
|
::= { dppipLimitsTable 1 }
|
|
|
|
DppipLimitsEntry ::= SEQUENCE {
|
|
dppipMaxFecMode FecMode,
|
|
dppipMaxFecRows Unsigned32,
|
|
dppipMinFecRows Unsigned32,
|
|
dppipMaxFecCols Unsigned32,
|
|
dppipMinFecCols Unsigned32,
|
|
dppipMaxFecElems Unsigned32,
|
|
dppipMaxTxSlots Unsigned32,
|
|
dppipMinTxSlots Unsigned32,
|
|
dppipMaxTolJitter Unsigned32,
|
|
dppipMinTolJitter Unsigned32,
|
|
dppipDTSupport DppipSupport,
|
|
dppipTTSupport DppipSupport }
|
|
|
|
dppipMaxFecMode OBJECT-TYPE
|
|
SYNTAX FecMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's maximum mode of operation of the
|
|
Forward Error Correction function (FEC). The FEC function
|
|
may be not used (fecNone), used for column correction (fec1D)
|
|
or used for both row and column correction (fec2D)."
|
|
::= { dppipLimitsEntry 1 }
|
|
|
|
dppipMaxFecRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's maximum number of data rows in the
|
|
transmit side Forward Error Correction (FEC) matrix."
|
|
::= { dppipLimitsEntry 2 }
|
|
|
|
dppipMinFecRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's minimum number of data rows in the
|
|
transmit side Forward Error Correction (FEC) matrix."
|
|
::= { dppipLimitsEntry 3 }
|
|
|
|
dppipMaxFecCols OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's maximum number of data columns in the
|
|
transmit side Forward Error Correction (FEC) matrix."
|
|
::= { dppipLimitsEntry 4 }
|
|
|
|
dppipMinFecCols OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's minimum number of data columns in the
|
|
transmit side Forward Error Correction (FEC) matrix."
|
|
::= { dppipLimitsEntry 5 }
|
|
|
|
dppipMaxFecElems OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DPP-IP interface's maximum number of data elements in the
|
|
transmit side Forward Error Correction (FEC) matrix."
|
|
::= { dppipLimitsEntry 6 }
|
|
|
|
dppipMaxTxSlots OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of slots per DTM frame that can be
|
|
allocated at the DPP-IP transmit interface."
|
|
::= { dppipLimitsEntry 7 }
|
|
|
|
dppipMinTxSlots OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of slots per DTM frame that can be
|
|
allocated at the DPP-IP transmit interface."
|
|
::= { dppipLimitsEntry 8 }
|
|
|
|
dppipMaxTolJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum tolerated jitter that can be configured expressed
|
|
in units of DPP-IP inter-frame intervals.
|
|
|
|
The DPP-IP inter-frame interval in microseconds is:
|
|
dppipRxSlotsPerFrame * 125 / dppipRxSlots."
|
|
::= { dppipLimitsEntry 9 }
|
|
|
|
dppipMinTolJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum tolerated jitter that can be configured expressed
|
|
in units of DPP-IP inter-frame intervals.
|
|
|
|
The DPP-IP inter-frame interval in microseconds is:
|
|
dppipRxSlotsPerFrame * 125 / dppipRxSlots."
|
|
::= { dppipLimitsEntry 10 }
|
|
|
|
dppipDTSupport OBJECT-TYPE
|
|
SYNTAX DppipSupport
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local interface's maximum level of support for the
|
|
Dynamic Trunk function."
|
|
::= { dppipLimitsEntry 11 }
|
|
|
|
dppipTTSupport OBJECT-TYPE
|
|
SYNTAX DppipSupport
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local interface's maximum level of support for the Time
|
|
Transfer function."
|
|
::= { dppipLimitsEntry 12 }
|
|
|
|
-- End of DPP-IP limits table
|
|
|
|
-- The DPP-IP peer limits table
|
|
|
|
-- The DPP-IP limits table contains information on the system's
|
|
-- DPP-IP interfaces. The table contains limits that will not
|
|
-- change during the uptime of the peer interface.
|
|
|
|
dppipPeerLimitsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DppipPeerLimitsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of DPP-IP interface limits entries. The number of
|
|
entries is given by the value of dppipNumber."
|
|
::= { dppipGroup 5 }
|
|
|
|
dppipPeerLimitsEntry OBJECT-TYPE
|
|
SYNTAX DppipPeerLimitsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DPP-IP interface peer limits entry containing limits for the peer
|
|
of a particular interface."
|
|
INDEX { dppipIndex }
|
|
::= { dppipPeerLimitsTable 1 }
|
|
|
|
DppipPeerLimitsEntry ::= SEQUENCE {
|
|
dppipPeerMaxFecMode FecMode,
|
|
dppipPeerMaxFecRows Unsigned32,
|
|
dppipPeerMinFecRows Unsigned32,
|
|
dppipPeerMaxFecCols Unsigned32,
|
|
dppipPeerMinFecCols Unsigned32,
|
|
dppipPeerMaxFecElems Unsigned32,
|
|
dppipPeerMaxRxSlots Unsigned32,
|
|
dppipPeerMinRxSlots Unsigned32,
|
|
dppipPeerDTSupport DppipSupport,
|
|
dppipPeerTTSupport DppipSupport }
|
|
|
|
dppipPeerMaxFecMode OBJECT-TYPE
|
|
SYNTAX FecMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer interface's maximum mode of operation of the Forward
|
|
Error Correction function (FEC).
|
|
|
|
The FEC function may be not used (fecNone), used for column
|
|
correction (fec1D) or used for both row and column correction
|
|
(fec2D)."
|
|
::= { dppipPeerLimitsEntry 1 }
|
|
|
|
dppipPeerMaxFecRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer interface's maximum number of data rows in the
|
|
receive side Forward Error Correction (FEC) matrix."
|
|
::= { dppipPeerLimitsEntry 2 }
|
|
|
|
dppipPeerMinFecRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer interface's minimum number of data rows in the
|
|
receive side Forward Error Correction (FEC) matrix."
|
|
::= { dppipPeerLimitsEntry 3 }
|
|
|
|
dppipPeerMaxFecCols OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer interface's maximum number of data columns in the
|
|
receive side Forward Error Correction (FEC) matrix."
|
|
::= { dppipPeerLimitsEntry 4 }
|
|
|
|
dppipPeerMinFecCols OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer interface's minimum number of data columns in the
|
|
receive side Forward Error Correction (FEC) matrix."
|
|
::= { dppipPeerLimitsEntry 5 }
|
|
|
|
dppipPeerMaxFecElems OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer interface's maximum number of data elements in the
|
|
receive side Forward Error Correction (FEC) matrix."
|
|
::= { dppipPeerLimitsEntry 6 }
|
|
|
|
dppipPeerMaxRxSlots OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of slots per DTM frame that can be
|
|
allocated at the receive interface in the peer."
|
|
::= { dppipPeerLimitsEntry 7 }
|
|
|
|
dppipPeerMinRxSlots OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum number of slots per DTM frame that can be
|
|
allocated at the DPP-IP receive interface of the peer."
|
|
::= { dppipPeerLimitsEntry 8 }
|
|
|
|
dppipPeerDTSupport OBJECT-TYPE
|
|
SYNTAX DppipSupport
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer interface's maximum level of support for the Dynamic
|
|
Trunk function."
|
|
::= { dppipPeerLimitsEntry 9 }
|
|
|
|
dppipPeerTTSupport OBJECT-TYPE
|
|
SYNTAX DppipSupport
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer interface's maximum level of support for the Time
|
|
Transfer function."
|
|
::= { dppipPeerLimitsEntry 10 }
|
|
|
|
-- End of DPP-IP peer limits table
|
|
|
|
END
|