Observium_CE/mibs/netgear/NG700-ROUTING-MIB

1693 lines
61 KiB
Plaintext

NG700-ROUTING-MIB DEFINITIONS ::= BEGIN
-- Netgear Routing MIB
-- Copyright Netgear Inc (2001-2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
Integer32, TimeTicks, Gauge32, Unsigned32, Counter32
FROM SNMPv2-SMI
RowStatus, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
ng700smartswitch FROM NG700-REF-MIB
DisplayString,PhysAddress FROM RFC1213-MIB
ifIndex, InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
InterfaceIndexOrZero FROM IF-MIB;
fastPathRouting MODULE-IDENTITY
LAST-UPDATED "201101260000Z" -- 26 Jan 2011 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"The Netgear Private MIB for FastPath Routing"
-- Revision history.
REVISION
"201101260000Z" -- 26 Jan 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Netgear branding related changes."
REVISION
"200311210000Z" -- 21 Nov 2003 12:00:00 GMT
DESCRIPTION
"Revisions made for new release."
REVISION
"200304021700Z" -- 2 April 2003 12:00 PM EST
DESCRIPTION
"Updated for release"
::= { ng700smartswitch 2 }
SpfTimerRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The range of intervals on which Spf timers can be configured."
SYNTAX Integer32 (0..65535)
--**************************************************************************************
-- agentSwitchArpGroup
--
--**************************************************************************************
agentSwitchArpGroup OBJECT IDENTIFIER ::= { fastPathRouting 1 }
agentSwitchArpAgeoutTime OBJECT-TYPE
SYNTAX Integer32 (15..21600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the ARP entry ageout time in seconds.
Allowable range: 15-21600"
DEFVAL { 1200 }
::= { agentSwitchArpGroup 1 }
agentSwitchArpResponseTime OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the ARP request response timeout in seconds.
Allowable range: 1-10"
::= { agentSwitchArpGroup 2 }
agentSwitchArpMaxRetries OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the ARP count of maximum request for retries.
Allowable range: 0-10"
::= { agentSwitchArpGroup 3 }
agentSwitchArpCacheSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the ARP maximum number of entries in the cache.
Allowable range is platform-specific."
::= { agentSwitchArpGroup 4 }
agentSwitchArpDynamicRenew OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the current setting of ARP dynamic renew mode. "
DEFVAL { enable }
::= { agentSwitchArpGroup 5 }
agentSwitchArpTotalEntryCountCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of entries in the ARP cache."
::= { agentSwitchArpGroup 6 }
agentSwitchArpTotalEntryCountPeak OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of entries recorded in the ARP cache over
time. This value is restarted whenever the ARP cache
size is changed."
::= { agentSwitchArpGroup 7 }
agentSwitchArpStaticEntryCountCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of configured static ARP entries."
::= { agentSwitchArpGroup 8 }
agentSwitchArpStaticEntryCountMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of configurable static ARP entries."
::= { agentSwitchArpGroup 9 }
--**************************************************************************************
agentSwitchArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchArpEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information."
::= { agentSwitchArpGroup 10 }
agentSwitchArpEntry OBJECT-TYPE
SYNTAX AgentSwitchArpEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
""
INDEX { agentSwitchArpIpAddress }
::= { agentSwitchArpTable 1 }
AgentSwitchArpEntry ::= SEQUENCE {
agentSwitchArpAge
TimeTicks,
agentSwitchArpIpAddress
IpAddress,
agentSwitchArpMacAddress
PhysAddress,
agentSwitchArpInterface
Integer32,
agentSwitchArpType
INTEGER,
agentSwitchArpStatus
RowStatus
}
agentSwitchArpAge OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging."
::= { agentSwitchArpEntry 1 }
agentSwitchArpIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The IP Address assigned to each interface."
::= { agentSwitchArpEntry 2 }
agentSwitchArpMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The hardware MAX Address that each interface maps to."
::= { agentSwitchArpEntry 3 }
agentSwitchArpInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The Associated IfIndex which identified the ARP Entry."
::= { agentSwitchArpEntry 4 }
agentSwitchArpType OBJECT-TYPE
SYNTAX INTEGER {
local(1),
gateway(2),
static(3),
dynamic(4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The type of ARP entry."
::= { agentSwitchArpEntry 5 }
agentSwitchArpStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The status of this ARP entry. Setting this object destroy will remove the entry."
::= { agentSwitchArpEntry 6 }
--*************************************************************************
--*************************************************************************
agentSwitchIntfArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchIntfArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information."
::= { agentSwitchArpGroup 12 }
agentSwitchIntfArpEntry OBJECT-TYPE
SYNTAX AgentSwitchIntfArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { agentSwitchIntfArpIpAddress,
agentSwitchIntfArpIfIndex}
::= { agentSwitchIntfArpTable 1 }
AgentSwitchIntfArpEntry ::= SEQUENCE {
agentSwitchIntfArpIpAddress
IpAddress,
agentSwitchIntfArpIfIndex
InterfaceIndex,
agentSwitchIntfArpAge
TimeTicks,
agentSwitchIntfArpMacAddress
PhysAddress,
agentSwitchIntfArpType
INTEGER,
agentSwitchIntfArpStatus
RowStatus
}
agentSwitchIntfArpIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Type of Address assigned to this interface."
::= { agentSwitchIntfArpEntry 1 }
agentSwitchIntfArpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Associated IfIndex which identified the ARP Entry.
This value must be specified for static ARP entries on an
unnumbered interface"
::= { agentSwitchIntfArpEntry 2 }
agentSwitchIntfArpAge OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging."
::= { agentSwitchIntfArpEntry 3 }
agentSwitchIntfArpMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The hardware MAX Address that each interface maps to."
::= { agentSwitchIntfArpEntry 4 }
agentSwitchIntfArpType OBJECT-TYPE
SYNTAX INTEGER {
local(1),
gateway(2),
static(3),
dynamic(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of ARP entry."
::= { agentSwitchIntfArpEntry 5 }
agentSwitchIntfArpStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this ARP entry. Setting this object destroy will remove the entry."
::= { agentSwitchIntfArpEntry 6 }
--**************************************************************************************
-- agentSwitchIpGroup
--
--**************************************************************************************
agentSwitchIpGroup OBJECT IDENTIFIER ::= { fastPathRouting 2 }
agentSwitchIpRoutingMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables routing on the switch."
::= { agentSwitchIpGroup 1 }
agentSwitchIpDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Default Gateway manually configured."
::= { agentSwitchIpGroup 2}
--**************************************************************************************
-- agentSwitchIpInterfaceTable
--
--**************************************************************************************
agentSwitchIpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchIpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { agentSwitchIpGroup 3 }
agentSwitchIpInterfaceEntry OBJECT-TYPE
SYNTAX AgentSwitchIpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { agentSwitchIpInterfaceIfIndex }
::= { agentSwitchIpInterfaceTable 1 }
AgentSwitchIpInterfaceEntry ::= SEQUENCE {
agentSwitchIpInterfaceIfIndex
Integer32,
agentSwitchIPAddressConfigMethod
INTEGER,
agentSwitchIpInterfaceIpAddress
IpAddress,
agentSwitchIpInterfaceNetMask
IpAddress,
agentSwitchIpInterfaceClearIp
INTEGER,
agentSwitchIpInterfaceRoutingMode
INTEGER,
agentSwitchIpInterfaceMtuValue
Unsigned32,
agentSwitchIpInterfaceBandwidth
Unsigned32,
agentSwitchIpInterfaceUnnumberedIfIndex
InterfaceIndexOrZero,
agentSwitchIpInterfaceIcmpUnreachables
INTEGER,
agentSwitchIpInterfaceIcmpRedirects
INTEGER,
agentSwitchDhcpOperation
INTEGER,
agentSwitchIpInterfaceSuppressed
INTEGER,
agentSwitchIpInterfaceNumberOfFlaps
Unsigned32,
agentSwitchIpInterfaceCurrentPenalty
Unsigned32,
agentSwitchIpInterfaceReUseTime
Unsigned32
}
agentSwitchIpInterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex associated with this instance."
::= { agentSwitchIpInterfaceEntry 1 }
agentSwitchIPAddressConfigMethod OBJECT-TYPE
SYNTAX INTEGER{
none(0),
manual(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source of the IP Address. User can set the object to none(0) or dhcp(2).
Option dhcp(2) enables Dhcp Client on the interface.
Option none(0) disables Dhcp Client on the interface.
Get on this object returns manual(1) only when the interface has a manually configured address."
::= { agentSwitchIpInterfaceEntry 2 }
agentSwitchIpInterfaceIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IpAddress assigned to this interface. When setting this value,
the value of agentSwitchIpInterfaceNetMask must be set at the same time."
::= { agentSwitchIpInterfaceEntry 3 }
agentSwitchIpInterfaceNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NetMask assigned to this interface. When setting this value, the
value of agentSwitchIpInterfaceIpAddress must be set at the same time."
::= { agentSwitchIpInterfaceEntry 4 }
agentSwitchIpInterfaceClearIp OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the interfaces IpAddress and NetMask back to 0.0.0.0"
::= { agentSwitchIpInterfaceEntry 5 }
agentSwitchIpInterfaceRoutingMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables routing for this interface."
::= { agentSwitchIpInterfaceEntry 6 }
agentSwitchIpInterfaceMtuValue OBJECT-TYPE
SYNTAX Unsigned32 (0|68..9198)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the MTU value for this interface. The applicable range is
68 to the <interface MTU value - 18>, in bytes. Get of this object
returns the effective MTU value on the interface. Set of this object
with a value of 0 resets the MTU to the default IP MTU value on the
interface."
::= { agentSwitchIpInterfaceEntry 8 }
agentSwitchIpInterfaceBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0|1..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the Bandwidth value for this interface. If the value returned is 0
bandwidth for this interface is not Configured."
::= { agentSwitchIpInterfaceEntry 9 }
agentSwitchIpInterfaceUnnumberedIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this object is non-zero, it indicates that the interface is unnumbered,
and specifies which interface the address is borrowed from."
::= { agentSwitchIpInterfaceEntry 10 }
agentSwitchIpInterfaceIcmpUnreachables OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is enable, it indicates that ICMP unreachables can be sent on this
interface."
::= { agentSwitchIpInterfaceEntry 11 }
agentSwitchIpInterfaceIcmpRedirects OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is enable and agentSwitchIpIcmpRedirectsMode is also enable ICMP Redirects
can be sent on this interface."
::= { agentSwitchIpInterfaceEntry 12 }
agentSwitchDhcpOperation OBJECT-TYPE
SYNTAX INTEGER{
renew(1),
release(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Renew or Release the IP Address learned through DHCP.
Get on this object always gives none. none means no operation is performed on dhcp."
::= { agentSwitchIpInterfaceEntry 13 }
agentSwitchIpInterfaceSuppressed OBJECT-TYPE
SYNTAX INTEGER{
unsuppressed(0),
suppressed(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This mib variable contains the following values, which has the meaning as:
'unsuppressed' - The interface is not suppressed
'suppressed' - The interface is suppressed
"
::= { agentSwitchIpInterfaceEntry 14 }
agentSwitchIpInterfaceNumberOfFlaps OBJECT-TYPE
SYNTAX Unsigned32 (0 .. 4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib variable displays the number of flaps occurred on the interface"
::= { agentSwitchIpInterfaceEntry 15 }
agentSwitchIpInterfaceCurrentPenalty OBJECT-TYPE
SYNTAX Unsigned32 (0 .. 20000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib variable displays the current penalty of an interface"
::= { agentSwitchIpInterfaceEntry 16 }
agentSwitchIpInterfaceReUseTime OBJECT-TYPE
SYNTAX Unsigned32 (0 .. 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib variable displays the number of seconds until the interface is
allowed to come up "
::= { agentSwitchIpInterfaceEntry 17 }
--**************************************************************************************
-- agentSwitchIpRouterDiscoveryTable
--
--**************************************************************************************
agentSwitchIpRouterDiscoveryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchIpRouterDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is no global administrative flag for router discovery. The global
routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing
is disabled, router discovery is disabled as well."
::= { agentSwitchIpGroup 4 }
agentSwitchIpRouterDiscoveryEntry OBJECT-TYPE
SYNTAX AgentSwitchIpRouterDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { agentSwitchIpRouterDiscoveryIfIndex }
::= { agentSwitchIpRouterDiscoveryTable 1 }
AgentSwitchIpRouterDiscoveryEntry ::= SEQUENCE {
agentSwitchIpRouterDiscoveryIfIndex
Integer32,
agentSwitchIpRouterDiscoveryAdvertiseMode
INTEGER,
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval
Integer32,
agentSwitchIpRouterDiscoveryMinAdvertisementInterval
Integer32,
agentSwitchIpRouterDiscoveryAdvertisementLifetime
Integer32,
agentSwitchIpRouterDiscoveryPreferenceLevel
Integer32,
agentSwitchIpRouterDiscoveryAdvertisementAddress
IpAddress
}
agentSwitchIpRouterDiscoveryIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Number to configure Router Discovery on."
::= { agentSwitchIpRouterDiscoveryEntry 1 }
agentSwitchIpRouterDiscoveryAdvertiseMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable router discovery on the interface."
DEFVAL { disable }
::= { agentSwitchIpRouterDiscoveryEntry 2 }
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval OBJECT-TYPE
SYNTAX Integer32 (4..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum time allowed between sending router advertisements
from the interface."
DEFVAL { 600 }
::= { agentSwitchIpRouterDiscoveryEntry 3 }
agentSwitchIpRouterDiscoveryMinAdvertisementInterval OBJECT-TYPE
SYNTAX Integer32 (3..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum time allowed between sending router advertisements from the interface.
This value must be less than or equal to
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval."
DEFVAL { 450 }
::= { agentSwitchIpRouterDiscoveryEntry 4 }
agentSwitchIpRouterDiscoveryAdvertisementLifetime OBJECT-TYPE
SYNTAX Integer32 (4..9000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of lifetime field of router advertsisement sent from
the interface.
This value must be greater than or equal to
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval."
DEFVAL { 1800 }
::= { agentSwitchIpRouterDiscoveryEntry 5 }
agentSwitchIpRouterDiscoveryPreferenceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preferability of the address as a default router address,
related to other addresses on the same subnet. This is defined
as the larger the number, the higher the preference."
DEFVAL { 0 }
::= { agentSwitchIpRouterDiscoveryEntry 6 }
agentSwitchIpRouterDiscoveryAdvertisementAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Address used when sending router advertisements from the interface."
DEFVAL { 'E0000001'H } -- 224.0.0.1
::= { agentSwitchIpRouterDiscoveryEntry 7 }
--**************************************************************************************
-- agentSwitchIpVlanTable
--
--**************************************************************************************
agentSwitchIpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchIpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { agentSwitchIpGroup 5 }
agentSwitchIpVlanEntry OBJECT-TYPE
SYNTAX AgentSwitchIpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Static VLAN for which routing can be enabled/disabled"
INDEX { agentSwitchIpVlanId }
::= { agentSwitchIpVlanTable 1 }
AgentSwitchIpVlanEntry ::= SEQUENCE {
agentSwitchIpVlanId
Integer32,
agentSwitchIpVlanIfIndex
Integer32,
agentSwitchIpVlanRoutingStatus
RowStatus
}
agentSwitchIpVlanId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan's Id."
::= { agentSwitchIpVlanEntry 1 }
agentSwitchIpVlanIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex associated with this VLAN."
::= { agentSwitchIpVlanEntry 2 }
agentSwitchIpVlanRoutingStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of Routing mode per Vlan.
active(1) - Vlan is enabled for routing
createAndGo(4) - Adds Vlan entry for routing
destroy(6) - Removes Vlan from routing"
::= { agentSwitchIpVlanEntry 3 }
--**************************************************************************************
-- agentSwitchSecondaryAddressTable
--
--**************************************************************************************
agentSwitchSecondaryAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchSecondaryAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a list of secondary IP Addresses associated with an interface."
::= { agentSwitchIpGroup 6 }
agentSwitchSecondaryAddressEntry OBJECT-TYPE
SYNTAX AgentSwitchSecondaryAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A secondary IP Address for a given interface. This IP Address must not
conflict with the IP Address configured in the agentSwitchIpInterfaceTable."
INDEX { agentSwitchIpInterfaceIfIndex, agentSwitchSecondaryIpAddress }
::= { agentSwitchSecondaryAddressTable 1 }
AgentSwitchSecondaryAddressEntry ::= SEQUENCE {
agentSwitchSecondaryIpAddress
IpAddress,
agentSwitchSecondaryNetMask
IpAddress,
agentSwitchSecondaryStatus
RowStatus
}
agentSwitchSecondaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Secondary IP Address assigned to this interface."
::= { agentSwitchSecondaryAddressEntry 1 }
agentSwitchSecondaryNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Secondary Net Mask assigned to this interface. This value must be
set during creation, and can not be changed."
::= { agentSwitchSecondaryAddressEntry 2 }
agentSwitchSecondaryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creates a new entry in the Secondary Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentSwitchSecondaryNetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface."
::= { agentSwitchSecondaryAddressEntry 3 }
--**************************************************************************************
-- agentSwitchHelperAddressTable
--
--**************************************************************************************
agentSwitchHelperAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchHelperAddressEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Replaced by agentSwitchIntfIpHelperAddressTable."
::= { agentSwitchIpGroup 7}
agentSwitchHelperAddressEntry OBJECT-TYPE
SYNTAX AgentSwitchHelperAddressEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A Helper IP Address for a given interface."
INDEX { agentSwitchIpInterfaceIfIndex, agentSwitchHelperIpAddress }
::= { agentSwitchHelperAddressTable 1 }
AgentSwitchHelperAddressEntry ::= SEQUENCE {
agentSwitchHelperIpAddress
IpAddress,
agentSwitchHelperStatus
RowStatus
}
agentSwitchHelperIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The Helper IP Address assigned to this interface."
::= { agentSwitchHelperAddressEntry 1 }
agentSwitchHelperStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Creates a new entry in the Helper Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentSwitchHelperNetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface."
::= { agentSwitchHelperAddressEntry 2 }
--**************************************************************************************
-- agentSwitchIpIcmpGroup
--
--**************************************************************************************
agentSwitchIpIcmpControlGroup OBJECT IDENTIFIER ::= { agentSwitchIpGroup 8}
agentSwitchIpIcmpEchoReplyMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the administrative Echo Reply Mode."
::= { agentSwitchIpIcmpControlGroup 1 }
agentSwitchIpIcmpRedirectsMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the administrative Mode for sending Redirects. "
::= { agentSwitchIpIcmpControlGroup 2 }
agentSwitchIpIcmpRateLimitInterval OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time interval between tokens being placed in the bucket for
ICMP Ratelimit."
::= { agentSwitchIpIcmpControlGroup 3 }
agentSwitchIpIcmpRateLimitBurstSize OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of tokens to be placed after timeout."
::= { agentSwitchIpIcmpControlGroup 4 }
--**************************************************************************************
-- agentSwitchIntfIpHelperAddressTable
--
--**************************************************************************************
agentSwitchIntfIpHelperAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchIntfIpHelperAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a list of IP helper addresses associated with an interface."
::= { agentSwitchIpGroup 10}
agentSwitchIntfIpHelperAddressEntry OBJECT-TYPE
SYNTAX AgentSwitchIntfIpHelperAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP helper address for a given interface."
INDEX { agentSwitchIpInterfaceIfIndex, agentSwitchIntfIpHelperUdpPort, agentSwitchIntfIpHelperIpAddress }
::= { agentSwitchIntfIpHelperAddressTable 1 }
AgentSwitchIntfIpHelperAddressEntry ::= SEQUENCE {
agentSwitchIntfIpHelperIpAddress
IpAddress,
agentSwitchIntfIpHelperUdpPort
Unsigned32,
agentSwitchIntfIpHelperDiscard
TruthValue,
agentSwitchIntfIpHelperHitCount
Unsigned32,
agentSwitchIntfIpHelperStatus
RowStatus
}
agentSwitchIntfIpHelperIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP helper address for packets received on this interface.
An address of 0.0.0.0 identifies the entry as a discard entry.
Packets that match a discard entry are dropped."
::= { agentSwitchIntfIpHelperAddressEntry 1 }
agentSwitchIntfIpHelperUdpPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"UDP port number. Received packets with this destination UDP port
number are forwarded to the helper address in this entry."
::= { agentSwitchIntfIpHelperAddressEntry 2 }
agentSwitchIntfIpHelperDiscard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Variable obsoleted. To create a discard entry, set the
helper address to 0.0.0.0."
::= { agentSwitchIntfIpHelperAddressEntry 3 }
agentSwitchIntfIpHelperHitCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a packet has been forwarded or discarded according to this entry."
::= { agentSwitchIntfIpHelperAddressEntry 4 }
agentSwitchIntfIpHelperStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creates a new entry in the Helper Address table.
Allowed values are:
createAndGo(4) - Creates an IP helper entry in this table.
destroy(6) - Removes the IP helper entry."
::= { agentSwitchIntfIpHelperAddressEntry 5 }
agentSwitchClearIpDefaultGateway OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Resets the Global Default Gateway address."
::= { agentSwitchIpGroup 11}
--**************************************************************************************
-- agentBootpDhcpRelayGroup
--
--**************************************************************************************
agentBootpDhcpRelayGroup OBJECT IDENTIFIER ::= { fastPathRouting 6 }
agentBootpDhcpRelayMaxHopCount OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The BOOTP/DHCP Max Hop Count.
The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16
assuming that the request is looped through the intermediate agents. The default value is 4."
DEFVAL { 4 }
::= { agentBootpDhcpRelayGroup 1 }
agentBootpDhcpRelayForwardingIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"DHCP server addresses are now configured through IP helper."
::= { agentBootpDhcpRelayGroup 2 }
agentBootpDhcpRelayForwardMode OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The DHCP relay admin mode is replaced by the IP helper admin mode."
::= { agentBootpDhcpRelayGroup 3 }
agentBootpDhcpRelayMinWaitTime OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The BOOTP/DHCP Minimum Wait Time.
When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs'
(seconds since client began booting) field of the request as a factor in deciding whether to
relay the request or not."
::= { agentBootpDhcpRelayGroup 4 }
agentBootpDhcpRelayCircuitIdOptionMode OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The BOOTP/DHCP Circuit ID Option Mode.
This flag is set to enable/disable the network element to add/remove the DHCP Relay agent
Circuit ID sub-options."
::= { agentBootpDhcpRelayGroup 5 }
agentBootpDhcpRelayNumOfRequestsReceived OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Replaced by IP helper statistics."
::= { agentBootpDhcpRelayGroup 6 }
agentBootpDhcpRelayNumOfRequestsForwarded OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Replaced by IP helper statistics."
::= { agentBootpDhcpRelayGroup 7 }
agentBootpDhcpRelayNumOfDiscards OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Replaced by IP helper statistics."
::= { agentBootpDhcpRelayGroup 8 }
--**************************************************************************************
-- ipHelperGroup
--
--**************************************************************************************
agentIpHelperGroup OBJECT IDENTIFIER ::= { fastPathRouting 11 }
agentIpHelperAdminMode OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable or disable IP helper."
::= { agentIpHelperGroup 1 }
agentDhcpClientMsgsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of DHCP Requests Received.
Total number of DHCP requests received from all clients."
::= { agentIpHelperGroup 2 }
agentDhcpClientMsgsRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of DHCP Requests Forwarded.
Total number of DHCP requests relayed to a server."
::= { agentIpHelperGroup 3 }
agentDhcpServerMsgsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DHCP messages received from a server."
::= { agentIpHelperGroup 4 }
agentDhcpServerMsgsRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DHCP messages relayed to a server."
::= { agentIpHelperGroup 5 }
agentUdpClientMsgsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of UDP messages received from all clients."
::= { agentIpHelperGroup 6 }
agentUdpClientMsgsRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of UDP messages relayed to a server."
::= { agentIpHelperGroup 7 }
--**************************************************************************************
-- agentSwitchIpHelperAddressTable
--
--**************************************************************************************
agentSwitchIpHelperAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchIpHelperAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a list of IP helper addresses configured globally."
::= { agentIpHelperGroup 8}
agentSwitchIpHelperAddressEntry OBJECT-TYPE
SYNTAX AgentSwitchIpHelperAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP Helper address that applies to packets received on any interface."
INDEX { agentSwitchIpHelperAddress, agentSwitchIpHelperUdpPort }
::= { agentSwitchIpHelperAddressTable 1 }
AgentSwitchIpHelperAddressEntry ::= SEQUENCE {
agentSwitchIpHelperAddress
IpAddress,
agentSwitchIpHelperUdpPort
Unsigned32,
agentSwitchIpHelperHitCount
Unsigned32,
agentSwitchIpHelperStatus
RowStatus
}
agentSwitchIpHelperAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Helper address assigned to this interface."
::= { agentSwitchIpHelperAddressEntry 1 }
agentSwitchIpHelperUdpPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UDP port number."
::= { agentSwitchIpHelperAddressEntry 2 }
agentSwitchIpHelperHitCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a packet has been forwarded or discarded according to this entry."
::= { agentSwitchIpHelperAddressEntry 3 }
agentSwitchIpHelperStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creates a new entry in the global IP Helper address table.
Allowed values are:
createAndGo(4) - Creates an IP helper entry in this table.
destroy(6) - Removes the IP helper entry."
::= { agentSwitchIpHelperAddressEntry 4 }
agentUdpClientMsgsTtlExpired OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of UDP messages received with an expired TTL."
::= { agentIpHelperGroup 9 }
agentUdpClientMsgsDiscarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of UDP messages that matched a discard entry."
::= { agentIpHelperGroup 10 }
--**************************************************************************************
-- agentInternalVlanGroup
--
--**************************************************************************************
agentInternalVlanGroup OBJECT IDENTIFIER ::= { fastPathRouting 12 }
agentInternalVlanBase OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID internally assigned to the first port-based routing interface."
DEFVAL { 4093 }
::= { agentInternalVlanGroup 1 }
agentInternalVlanPolicy OBJECT-TYPE
SYNTAX INTEGER {
ascending (0),
descending (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether to search up or down from the base VLAN ID for a free VLAN ID to
assign to a port-based routing interface."
DEFVAL { descending }
::= { agentInternalVlanGroup 2 }
--****************************************************************************
-- agentSwitchInternalVlanTable
--
--*****************************************************************************
agentSwitchInternalVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchInternalVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a list of VLAN IDs used internally for port-based routing interfaces."
::= { agentInternalVlanGroup 3}
agentSwitchInternalVlanEntry OBJECT-TYPE
SYNTAX AgentSwitchInternalVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A VLAN ID internally assigned to a port-based routing interface."
INDEX { agentSwitchInternalVlanId }
::= { agentSwitchInternalVlanTable 1 }
AgentSwitchInternalVlanEntry ::= SEQUENCE {
agentSwitchInternalVlanId
Integer32,
agentSwitchInternalVlanIfIndex
Integer32
}
agentSwitchInternalVlanId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A VLAN ID internally assigned to a port-based routing interface."
::= { agentSwitchInternalVlanEntry 1 }
agentSwitchInternalVlanIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of port-based routing interface using this VLAN ID."
::= { agentSwitchInternalVlanEntry 2 }
--****************************************************************
-- agentRoutingHeapGroup
--
--****************************************************************
agentRoutingHeapGroup OBJECT IDENTIFIER ::= { fastPathRouting 16 }
agentRoutingHeapSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the routing heap, in bytes. Unicast routing protocols
and ARP allocate memory from the routing heap."
::= { agentRoutingHeapGroup 1 }
agentRoutingHeapInUse OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes currently allocated from the routing heap."
::= { agentRoutingHeapGroup 2 }
agentRoutingHeapHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High water mark for the number of bytes allocated from the routing heap."
::= { agentRoutingHeapGroup 3 }
--****************************************************************
-- agentRoutingTableSummaryGroup
--
--****************************************************************
agentRoutingTableSummaryGroup OBJECT IDENTIFIER ::= { fastPathRouting 17 }
agentConnectedRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of connected routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 1 }
agentStaticRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of static routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 2 }
agentRipRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RIP routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 3 }
agentOspfRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 4 }
agentOspfIntraRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 intra-area routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 5 }
agentOspfInterRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 inter-area routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 6 }
agentOspfExt1Routes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 external type 1 routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 7 }
agentOspfExt2Routes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 external type 2 routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 8 }
agentBgpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 9 }
agentEbgpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of external BGP routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 10 }
agentIbgpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of internal BGP routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 11 }
agentLocalBgpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of local BGP routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 12 }
agentRejectRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reject routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 13 }
agentTotalRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 14 }
agentBestRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 routes in the forwarding table."
::= { agentRoutingTableSummaryGroup 15 }
agentBestRoutesHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of IPv4 routes in the forwarding table."
::= { agentRoutingTableSummaryGroup 16 }
agentAlternateRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alternate routes in the IPv4 routing table.
An alternate route is less preferred than the best route and is not used for forwarding."
::= { agentRoutingTableSummaryGroup 17 }
agentRouteAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes added to the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 18 }
agentRouteModifies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes changed in the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 19 }
agentRouteDeletes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes removed from the IPv4 routing table."
::= { agentRoutingTableSummaryGroup 20 }
agentUnresolvedRouteAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 route adds that failed because none of the route's next hops were on a local subnet."
::= { agentRoutingTableSummaryGroup 21 }
agentInvalidRouteAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 routes adds that failed because the route was invalid."
::= { agentRoutingTableSummaryGroup 22 }
agentFailedRouteAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 routes adds that failed because of a resource limitation in the routing table"
::= { agentRoutingTableSummaryGroup 23 }
agentReservedLocals OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 routing table entries reserved for a local subnet on a routing interface that is down. "
::= { agentRoutingTableSummaryGroup 24 }
agentUniqueNextHops OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of distinct next hops used among all IPv4 routes currently in the routing table.
These include local interfaces for local routes and neighbors for indirect routes."
::= { agentRoutingTableSummaryGroup 25 }
agentUniqueNextHopsHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest count of unique next hops since counters were last cleared."
::= { agentRoutingTableSummaryGroup 26 }
agentNextHopGroups OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of next hop groups in use by one or more routes.
Each next hop group includes one or more next hops."
::= { agentRoutingTableSummaryGroup 27 }
agentNextHopGroupsHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest count of next hop groups since counters were last cleared."
::= { agentRoutingTableSummaryGroup 28 }
agentEcmpGroups OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of next hop groups with multiple next hops."
::= { agentRoutingTableSummaryGroup 29 }
agentEcmpGroupsHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high water mark of the number of ECMP groups."
::= { agentRoutingTableSummaryGroup 30 }
agentEcmpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of IPv4 routes with multiple next hops."
::= { agentRoutingTableSummaryGroup 31 }
agentTruncEcmpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ECMP routes that are currently installed in the forwarding table
with just one next hop. The forwarding table may limit the number of ECMP
routes or the number of ECMP groups. When an ECMP route cannot be installed
because such a limit is reached, the route is installed with a single next hop."
::= { agentRoutingTableSummaryGroup 32 }
agentEcmpRetries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ECMP routes that have been installed in the forwarding table
after initially being installed with a single next hop."
::= { agentRoutingTableSummaryGroup 33 }
--****************************************************************
-- agentEcmpCountTable
--
--************************************************************
agentEcmpCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentEcmpCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A count of the number of routes with each number of ECMP next hops."
::= { fastPathRouting 18}
agentEcmpCountEntry OBJECT-TYPE
SYNTAX AgentEcmpCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Number of IPv4 routes with a given number of next hops."
INDEX { agentEcmpNextHopCount }
::= { agentEcmpCountTable 1 }
AgentEcmpCountEntry ::= SEQUENCE {
agentEcmpNextHopCount
Unsigned32,
agentEcmpRouteCount
Gauge32
}
agentEcmpNextHopCount OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of next hops in a route. From 0 to the maximum number of
next hops in an ECMP route. The maximum varies by platform."
::= { agentEcmpCountEntry 1 }
agentEcmpRouteCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 routes with agentEcmpNextHopCount next hops."
::= { agentEcmpCountEntry 2 }
END