Observium_CE/mibs/netapp/NETAPP-REF-MIB

84 lines
2.9 KiB
Plaintext

NETAPP-REF-MIB DEFINITIONS ::= BEGIN
-- Broadcom Reference MIB
-- Copyright Broadcom Corporation (2001-2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Broadcom Corporation confidential and proprietary
-- intellectual property. Broadcom Corporation retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Broadcom Corporation
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, enterprises FROM SNMPv2-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC;
-- netapp FROM NETAPP-MIB;
broadcom MODULE-IDENTITY
LAST-UPDATED "200705230000Z" -- 23 May 2007 12:00:00 GMT
ORGANIZATION "Broadcom Corporation"
CONTACT-INFO
" Customer Support
Postal: Broadcom Corporation
100, Perimeter Park Drive
Morrisville, NC 27560
Tel: +1 919 865 2700"
DESCRIPTION
""
-- Revision history.
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Broadcom branding related changes."
REVISION
"200311210000Z" -- 21 Nov 2003 12:00:00 GMT
DESCRIPTION
"Revisions made for new release."
REVISION
"200302061200Z" -- 6 February 2003 12:00:00 GMT
DESCRIPTION
"Updated for release"
::= { netapp 4413 }
-- NetApp conventions
netapp OBJECT IDENTIFIER ::= { enterprises 789 }
-- New definitions
broadcomProducts OBJECT IDENTIFIER ::= { broadcom 1 }
fastPath OBJECT IDENTIFIER ::= { broadcomProducts 1 }
-- New Textual Conventions
AgentPortMask ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'
When setting this value, the system will ignore
configuration for ports not between the first and last
valid ports. Configuration of any port numbers between
this range that are not valid ports return a failure
message, but will still apply configuration for valid
ports."
SYNTAX OCTET STRING
END