WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/mrv/DC-RSVP-MIB

2303 lines
83 KiB
Plaintext
Raw Blame History

DC-RSVP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
enterprises, Integer32, Unsigned32, IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, RowStatus, TruthValue, DisplayString
FROM SNMPv2-TC
InterfaceIndexOrZero FROM IF-MIB
Ipv6Address FROM IPV6-TC
NumericIndexOrZero FROM DC-MASTER-TC;
dcRsvp MODULE-IDENTITY
LAST-UPDATED "201412210000Z" -- December 21, 2014
ORGANIZATION "MRV Communications."
CONTACT-INFO
"For technical support, please contact your service channel"
DESCRIPTION "The MIB module for management of the DC-RSVP
product."
-- Revision history
REVISION "201412210000Z" -- December 21, 2014
DESCRIPTION
"Initial edition."
::= { opx 6 }
nbase OBJECT IDENTIFIER ::= { enterprises 629 }
opx OBJECT IDENTIFIER ::= { nbase 10 }
dcRsvpObjects OBJECT IDENTIFIER ::= { dcRsvp 1 } -- tables
-- Textual conventions
DcRsvpAdminStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The desired administrative state of an RSVP
entity."
SYNTAX INTEGER {
adminStatusUp(1),
adminStatusDown(2)
}
DcRsvpOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The current operational state of an RSVP entity."
SYNTAX INTEGER {
operStatusUp(1), -- active
operStatusDown(2), -- inactive
operStatusGoingUp(3), -- activating
operStatusGoingDown(4), -- deactivating
operStatusActFailed(5) -- activation failed
}
DcRsvpIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The index value identifying an RSVP entity."
SYNTAX Unsigned32
DcRsvpDiagReqIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The index value identifying an RSVP session that is being
diagnosed."
SYNTAX Unsigned32
DcRsvpDiagNodeIndexType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The index value identifying a node within an RSVP session that is
being diagnosed."
SYNTAX Unsigned32
DcRsvpDiagNodeTypeVal ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The type of a node in a session that is being diagnosed."
SYNTAX INTEGER {
missing(1), -- no information received
ingress(2), -- the ingress node
transit(3), -- an intermediate node
egress(4) -- the egress node
}
DcRsvpIfRefreshOption ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The level of refresh reduction support to be configured on
this interface."
SYNTAX Unsigned32 {
no(0), -- refresh reduction not supported
srefreshMsgs(1), -- SRefresh supported
bundleSendMsgs(2), -- bundle messages supported
noReqAck(4) -- acks not requested
}
-- End of textual conventions
-- RSVP entity table
-- This table is used to create and manage RSVP entities.
dcRsvpProductTable OBJECT-TYPE
SYNTAX SEQUENCE OF DcRsvpProductEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of active instances of DC-RSVP. The number of
fields in this table is equal to AMB_OID_RSVP_PROD_MAX."
::= { dcRsvpObjects 1 }
dcRsvpProductEntry OBJECT-TYPE
SYNTAX DcRsvpProductEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents an RSVP entity."
INDEX { dcRsvpProductIndex }
::= { dcRsvpProductTable 1 }
DcRsvpProductEntry ::= SEQUENCE {
dcRsvpProductIndex DcRsvpIndex,
dcRsvpProductASNumber Integer32,
dcRsvpProductSenderTTL Integer32,
dcRsvpProductMinTimerPeriod Integer32,
dcRsvpProductAPIIfIndex InterfaceIndexOrZero,
dcRsvpProductAPIAddress OCTET STRING,
dcRsvpProductAPIRefreshInterval Integer32,
dcRsvpProductLocalRepairDelay Integer32,
dcRsvpProductRefreshInterval Integer32,
dcRsvpProductRefreshMultiple Integer32,
dcRsvpProductRfrshSlewDenom Integer32,
dcRsvpProductRfrshSlewNumerator Integer32,
dcRsvpProductBlockadeMultiple Integer32,
dcRsvpProductSocketBufPoolSize Integer32,
dcRsvpProductSwitchBufPoolSize Integer32,
dcRsvpProductTeMibBufPoolSize Integer32,
dcRsvpProductRoutingBufPoolSize Integer32,
dcRsvpProductLSPSetupPriority Integer32,
dcRsvpProductLSPHoldingPriority Integer32,
dcRsvpProductAdminStatus DcRsvpAdminStatus,
dcRsvpProductOperStatus DcRsvpOperStatus,
dcRsvpProductRowStatus RowStatus,
dcRsvpProductLsrIndex Unsigned32,
dcRsvpProductTeMibIndex Unsigned32,
dcRsvpProductMultiStackSupport Integer32,
dcRsvpProductUseHopByHop TruthValue,
dcRsvpProductUseNotify TruthValue,
dcRsvpProductNotifyRRDecay Integer32,
dcRsvpProductNotifyRRInterval Integer32,
dcRsvpProductNotifyRRLimit Integer32,
dcRsvpProductAllowIPEncap TruthValue,
dcRsvpProductProtocolExtensions Unsigned32,
dcRsvpProductPSRFlags Unsigned32,
dcRsvpProductInitPathRRDecay Integer32,
dcRsvpProductInitPathRRInterval Integer32,
dcRsvpProductInitPathRRLimit Integer32,
dcRsvpProductEnableUni TruthValue,
dcRsvpProductRestartCapable TruthValue,
dcRsvpProductRestartTime Unsigned32,
dcRsvpProductRecoveryTime Unsigned32,
dcRsvpProductMinPeerRestart Integer32,
dcRsvpProductGracefulDelTimeout Integer32,
dcRsvpProductEgressDelBehavior INTEGER,
dcRsvpProductEnabUniConnSplicing TruthValue,
dcRsvpProductFastRerouteCaps Unsigned32,
dcRsvpProductFastRroutBkpRtryInt Integer32,
dcRsvpProductErrorActionFlags Unsigned32,
dcRsvpProductEnableNni INTEGER,
dcRsvpProductBehaviorFlags Unsigned32,
dcRsvpProductLabelSetStyle INTEGER,
dcRsvpProductLabelSetOperStatus INTEGER,
dcRsvpProductLabelSetTrapEnable TruthValue,
dcRsvpProductLabelSetChngAct Integer32,
dcRsvpProductExtPrtAdminStatus DcRsvpAdminStatus,
dcRsvpProductUniIncSonetProfile Unsigned32,
dcRsvpProductFrrFacAdminStatus DcRsvpAdminStatus,
dcRsvpProductFrrFacOperStatus DcRsvpOperStatus,
dcRsvpProductIpv6AdminStatus DcRsvpAdminStatus,
dcRsvpProductIpv6OperStatus DcRsvpOperStatus,
dcRsvpProductAPIIpv6Address Ipv6Address,
dcRsvpProductExtPrtOperStatus DcRsvpOperStatus,
dcRsvpProductRROHopType INTEGER,
dcRsvpProductBfdIndex NumericIndexOrZero,
dcRsvpProductBfdBufPoolSize Integer32,
dcRsvpProductLspAttrAdminStatus DcRsvpAdminStatus,
dcRsvpProductLspAttrOperStatus DcRsvpOperStatus,
dcRsvpProductI3Index NumericIndexOrZero,
dcRsvpProductSckIndex NumericIndexOrZero,
dcRsvpProductNhrIndex NumericIndexOrZero,
dcRsvpProductWaitForHellos TruthValue,
dcRsvpProductForcePEOnEgrDel TruthValue,
dcRsvpProductFastRrtBkpSetupInt Integer32
}
dcRsvpProductIndex OBJECT-TYPE
SYNTAX DcRsvpIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this dcRsvpProductEntry. This is the
HAF entity index passed on the entity create parameters."
::= { dcRsvpProductEntry 1 }
dcRsvpProductASNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number identifying the autonomous system (AS) to which
this node belongs."
DEFVAL { 1 }
::= { dcRsvpProductEntry 2 }
dcRsvpProductSenderTTL OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TTL set on messages originating at this node. A value
of 0 indicates this number is determined by other means."
DEFVAL { 0 }
::= { dcRsvpProductEntry 3 }
dcRsvpProductMinTimerPeriod OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum granularity to allow an internal timer to be
set in the DC-RSVP product code."
DEFVAL { 200 }
::= { dcRsvpProductEntry 4 }
dcRsvpProductAPIIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Management assigned interface identifier for the (internal) LRAPI
interface between RSVP and DC-TPM components. This must be unique in
the interface index namespace of the node - it MUST not match any real
interface index.
It is recommended that this is set to zero or 0x7FFFFFFF."
DEFVAL { 2147483647 }
::= { dcRsvpProductEntry 5 }
dcRsvpProductAPIAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Management assigned IP address used to identify the (internal) LRAPI
interface between RSVP and DC-TPM components.
The configured API address MUST not be a real address in the network.
It is recommended that this is set to a non-zero reserved address
value, such as 224.0.0.0.
If multi-stack support is set to PHOP, this address must be unique for
each RSVP stack in the node.
The same address(es) can be used on all nodes in the network."
DEFVAL { 'E0000000'H } -- 224.0.0.0
::= { dcRsvpProductEntry 6 }
dcRsvpProductAPIRefreshInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is now deprecated."
DEFVAL { 30000 }
::= { dcRsvpProductEntry 7 }
dcRsvpProductLocalRepairDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to set the delay between detection of a
path error and instigation of local repair procedures. This
allows local routing updates to converge. A value of 0
indicates no delay. A value of -1 indicates that local
repair procedures should not take place, but that the error
should be propagated upstream.
Where FRR capabilities are supported at this node
local_repair_delay must be set to -1."
DEFVAL { 500 }
::= { dcRsvpProductEntry 8 }
dcRsvpProductRefreshInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RSVP value, R, which is used to set the average
interval between refresh path and resv messages.
Note : If values for the if_refresh_interval and if_refresh_multiple
are configured such that the following inequality is not obeyed :
6 * refresh_interval * (refresh_multiple + 0.5) < 0x7FFFFFFF.
Then the time-to-die for the path value will be set to its maximum
value and it is probable that the lsp will time out before a refresh
arrives."
DEFVAL { 30000 }
::= { dcRsvpProductEntry 9 }
dcRsvpProductRefreshMultiple OBJECT-TYPE
SYNTAX Integer32 (1..214783647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RSVP value, K, which is the number of unresponded Path
or Resv refresh attempts which must be made, spaced by
the refresh interval before the state is deemed to have
timed out.
Note : See note in dcRsvpProductRefreshInterval above."
DEFVAL { 3 }
::= { dcRsvpProductEntry 10 }
dcRsvpProductRfrshSlewDenom OBJECT-TYPE
SYNTAX Integer32 (1..214783647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The denominator of the fraction, SlewMax, which is the
maximum allowable increase in the refresh interval, R, to
prevent state timeout while changing R. R is increased by
this fraction until it reaches the new desired value."
DEFVAL { 10 }
::= { dcRsvpProductEntry 11 }
dcRsvpProductRfrshSlewNumerator OBJECT-TYPE
SYNTAX Integer32 (1..214783647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerator of the fraction, SlewMax, which is the maximum
allowable increase in the refresh interval, R, to prevent
state timeout while changing R. R is increased by this
fraction until it reaches the new desired value."
DEFVAL { 3 }
::= { dcRsvpProductEntry 12 }
dcRsvpProductBlockadeMultiple OBJECT-TYPE
SYNTAX Integer32 (1..214783647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RSVP value, Kb, which is the number of refresh timeout
periods after which blockade state is deleted."
DEFVAL { 2 }
::= { dcRsvpProductEntry 13 }
dcRsvpProductSocketBufPoolSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of pre-reserved buffers available for sending
sockets data. This is used to pace the sockets data flows."
DEFVAL { 8 }
::= { dcRsvpProductEntry 14 }
dcRsvpProductSwitchBufPoolSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of pre-reserved buffers available for programming
the switch. This is used to ensure programming operations do
not fail in buffer shortage conditions."
DEFVAL { 8 }
::= { dcRsvpProductEntry 15 }
dcRsvpProductTeMibBufPoolSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of pre-reserved buffers available for signalling
with the DC-TPM entity supporting the instance of the TE-MIB. This is
used to ensure signals are not lost in buffer shortage conditions."
DEFVAL { 8 }
::= { dcRsvpProductEntry 16 }
dcRsvpProductRoutingBufPoolSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of pre-reserved buffers available for route
queries. This is used to ensure re-routing of many LSPs does
not fail in buffer shortage conditions."
DEFVAL { 8 }
::= { dcRsvpProductEntry 17 }
dcRsvpProductLSPSetupPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The setup priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically more or equal (so lower or equal priority)
than the value of the holding priority object."
DEFVAL { 4 }
::= { dcRsvpProductEntry 18 }
dcRsvpProductLSPHoldingPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The holding priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically less or equal (so higher or equal priority)
than the value of the holding priority object."
DEFVAL { 3 }
::= { dcRsvpProductEntry 19 }
dcRsvpProductAdminStatus OBJECT-TYPE
SYNTAX DcRsvpAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state of the RSVP entity."
DEFVAL { adminStatusUp }
::= { dcRsvpProductEntry 20 }
dcRsvpProductOperStatus OBJECT-TYPE
SYNTAX DcRsvpOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of this instance of DC-RSVP."
::= { dcRsvpProductEntry 21 }
dcRsvpProductRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to create and delete a DC-RSVP Product Table entry.
When this object is set to 'active', only the
dcRsvpProductAdminStatus object in the row may be modified."
DEFVAL { active }
::= { dcRsvpProductEntry 22 }
dcRsvpProductLsrIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the DC-LMGR product instance which this
DC-RSVP is to join to as its LDB interface provider. If
this value is not specified, or the value of this object
is 0, DC-RSVP will use the dcRsvpProductIndex value as the
Lsr index when joining on the LDB interface."
DEFVAL { 0 }
::= { dcRsvpProductEntry 23 }
dcRsvpProductTeMibIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the DC-TPM entity (which supports the TE-MIB) with
which this DC-RSVP entity is to join to as its LRA interface
provider. If this value is not specified, or the value of this object
is 0, DC-RSVP will use the dcRsvpProductIndex value as the
TeMib Index when joining on the LRA interface."
DEFVAL { 0 }
::= { dcRsvpProductEntry 24 }
dcRsvpProductMultiStackSupport OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate if multiple RSVP stacks are present
in the same system as the current one and, if so, how
they are supported. If set to PHOP, Path messages are
forwarded to DC-RSVP with the Previous Hop value set as
the hop prior to the incoming interface, not as the next
hop interface as normal. If set to LIH, the hardware
location of the current RSVP stack is used as the LIH in
the HOP object."
DEFVAL { 1 }
::= { dcRsvpProductEntry 25 }
dcRsvpProductUseHopByHop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate that DC-RSVP should use the hop by hop
addressing scheme for PATH and PATH-TEAR messages it
sends. If set then the IP addresses used in the IP header
of PATH messages forwarded by DC-RSVP set source as the
local outgoing interface IP address, and destination as
the next hop router IP address."
DEFVAL { false }
::= { dcRsvpProductEntry 26 }
dcRsvpProductUseNotify OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate that DC-RSVP should attempt to insert
a Notify Request object in all Path requests that it sends
as ingress and all Resv requests that it sends as egress.
The precise behavior is modified by a user exit called by
the RSVP code.
This field is not used unless the mplsTunnelUpNotRecip or
mplsTunnelDownNotRecip fields in TE-MIB are set to 0.0.0.0."
DEFVAL { false }
::= { dcRsvpProductEntry 27 }
dcRsvpProductNotifyRRDecay OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage increase in the rapid retransmission
interval for each consecutive unacknowledged RSVP Notify
message. A value of 0 indicates a constant retransmission
rate."
DEFVAL { 100 }
::= { dcRsvpProductEntry 28 }
dcRsvpProductNotifyRRInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in milliseconds before a Notify message is
first resent if no acknowledgement is received."
DEFVAL { 2000 }
::= { dcRsvpProductEntry 29 }
dcRsvpProductNotifyRRLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of times a Notify message is resent if
no acknowledgement is received."
DEFVAL { 2 }
::= { dcRsvpProductEntry 30 }
dcRsvpProductAllowIPEncap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate that DC-RSVP should support the use of
IP encapsulation of RSVP packets, which are required for
out-of-band signaling. If set, then DC-RSVP will accept
incoming RSVP packets that are IP encapsulated, and will
IP encapsulate outgoing packets whenever the IP routing
stub indicates that it is required for a particular route."
DEFVAL { false }
::= { dcRsvpProductEntry 31 }
dcRsvpProductProtocolExtensions OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies which extensions to the standard RSVP-TE protocol
are enabled. For fully standards-compliant behavior, set
this parameter to zero (no bits set). To enable specific
non-standard protocol extensions, set this parameter to the
bitwise OR of whichever of the following behaviors you wish
to enable.
- bypassFastReroute: Enable support for facility fast reroute
protection of LSPs (bypass LSP protection). This flag is
deprecated in favour of the
dcRsvpProductFrrFacAdminStatus field which can be
modified while RSVP is admin up, however either field can be
used. When this flag is set RSVP automatically sets the
dcRsvpProductFrrFacAdminStatus.
- detourFastReroute: Enable support for one-to-one fast
reroute protection of LSPs (detour LSP protection).
- noResAffOnInIf: Disable resource affinity checking on
incoming interfaces for LSPs. If this flag is set, RSVP
will accept Path messages which use invalid resource
affinities for the incoming interface used by the LSP."
DEFVAL { 0 }
::= { dcRsvpProductEntry 32 }
dcRsvpProductPSRFlags OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used by DC-RSVP to determine whether it
should set the Path State Removed flag on a PathErr (and
therefore remove corresponding state and generate a
PathTear). Each bit of this flags field corresponds to a
situation where DC-RSVP may generate a PathErr. Setting a
particular bit will result in DC-RSVP removing state,
setting the Path State Removed flag and generating a
PathTear in that corresponding situation. The possible
bit values are as follows.
- pathErrPSRSet: DC-RSVP has received a PathErr message
with the Path State Removed flag set.
- pathErrPSRNotSet: DC-RSVP has received a PathErr message
with the Path State Removed flag unset.
- ldbCommonRcvd: DC-RSVP has received a negative response
to an ATG_LDB_RESERVE_LSP_XC or ATG_LDB_CONNECT_LSP_XC
message.
- ldbPreempted: DC-RSVP has received a Preemption message
from Label Manager.
- routingError: DC-RSVP has received a Negative response
to an ATG_IPR_QUERY_ROUTE message.
- invalidPathMsg: DC-RSVP has received an invalid Path
message.
- unableToRepairRoute: A route has been removed and
DC-RSVP is unable to start local repair.
- unableToRepairIf: An interface has been removed and
DC-RSVP is unable start local repair.
- reachedRetryLimit: An initial Path Message has reached
its retry limit.
- unableToRefresh: DC-RSVP has been unable to refresh an
LSP.
- resvErrTurnaround: DC-RSVP has received a ResvErr at the
Egress node containing a REROUTING object and this is to
be turned round into a PathErr.
- incomingIfDown: The incoming MPLS data interface for an
LSP has been deactivated.
- outgoingIfDown: The outgoing MPLS data interface for an
LSP has been deactivated."
DEFVAL { 0 }
::= { dcRsvpProductEntry 33 }
dcRsvpProductInitPathRRDecay OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage increase in the rapid
retransmission interval for each consecutive
unacknowledged RSVP Initial Path message. A value of 0
indicates a constant retransmission rate.
A Path message is treated as an initial Path if it is the
Path message which creates the LSP or a Path refresh
message which requires re-routing."
DEFVAL { 100 }
::= { dcRsvpProductEntry 34 }
dcRsvpProductInitPathRRInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The rapid retransmission interval in milliseconds before
an Initial Path message is first resent if no
acknowledgement is received.
A Path message is treated as an initial Path if it is the
Path message which creates the LSP or a Path refresh
message which requires re-routing."
DEFVAL { 2000 }
::= { dcRsvpProductEntry 35 }
dcRsvpProductInitPathRRLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of times an Initial Path message is
resent if no acknowledgement is received.
A Path message is treated as an initial Path if it is the
Path message which creates the LSP or a Path refresh
message which requires re-routing."
DEFVAL { 2 }
::= { dcRsvpProductEntry 36 }
dcRsvpProductEnableUni OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate whether the local node supports UNI
signaling messages."
DEFVAL { false }
::= { dcRsvpProductEntry 37 }
dcRsvpProductRestartCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate whether the local node should advertise
itself as restart capable. This should be set to AMB_TRUE
if fault-tolerance is enabled in DC-MPLS or if the node
supports recovery procedures."
DEFVAL { false }
::= { dcRsvpProductEntry 38 }
dcRsvpProductRestartTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time in milliseconds that the local node takes to
restart RSVP-TE and the communication channel used for
RSVP communication. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
The value chosen should be large enough for RSVP to be
terminated and restarted. If fault-tolerance is enabled
in DC-MPLS, then sufficient time should be allowed for
RSVP to fail over, which should include the time taken for
the audit phase to complete.
Only used if _restart_capable_ is set to AMB_TRUE.
A value of 0xFFFFFFFF can be configured, this implies an
infinite restart time.
Note that the maximum real time value that can be set is
0x7FFFFFFF. If a value is requested greater than
0x7FFFFFFF and less than 0xFFFFFFFF the request will be
rejected."
DEFVAL { 60000 }
::= { dcRsvpProductEntry 39 }
dcRsvpProductRecoveryTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The period of time in milliseconds that the local node
would like neighbors to take to resyncronize RSVP and MPLS
forwarding information after the re-establishment of Hello
connectivity. This is advertised to neighbors in the
Restart_Cap object in Hello messages.
A value of zero indicates that the node does not support
resynchronization following failure of the local node.
A value of 0xFFFFFFFF indicates an infinite recovery time.
Note that if fault-tolerance is not enabled in DC-MPLS and
the node is acting as an ingress for tunnels, then any
ingress tunnels that need to be recovered should be
configured during this recovery period. These tunnels
should be configured in TE-MIB with the admin_status set
to UP, otherwise they will be lost from the switch
controller.
Only used if _restart_capable_ is set to AMB_TRUE.
Note that the maximum real time value that can be set is
0x7FFFFFFF. If a value is requested greater than
0x7FFFFFFF and less than 0xFFFFFFFF the request will be
rejected."
DEFVAL { 120000 }
::= { dcRsvpProductEntry 40 }
dcRsvpProductMinPeerRestart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mininum period of time in milliseconds that RSVP
should wait for a restart capable neighbor to regain
Hello connectivity before invoking procedures related to
communication loss.
RSVP will wait for the maximum of this time and the
restart_time advertised in the RESTART_CAP object in Hello
messages from the neighbor."
DEFVAL { 0 }
::= { dcRsvpProductEntry 41 }
dcRsvpProductGracefulDelTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time in milliseconds that DC-MPLS will wait for
graceful deletion to complete before the forced deletion
procedure is used instead."
DEFVAL { 30000 }
::= { dcRsvpProductEntry 42 }
dcRsvpProductEgressDelBehavior OBJECT-TYPE
SYNTAX INTEGER { delWithPathErr(1),
delWithResvD(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the action that an egress node should take in
the graceful deletion procedure on receipt of a Path
message containing an Admin Status object with the D
and R bits set. The possible values are:
- delWithPathErr: Send a PathErr message with the
Path_State_removed flag set
- delWithResvD: Send a Resv message containing an Admin
Status object with the D bit set."
DEFVAL { delWithPathErr }
::= { dcRsvpProductEntry 43 }
dcRsvpProductEnabUniConnSplicing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate whether UNI-N nodes should allow the
splicing of UNI connections with proprietary ON
connections."
DEFVAL { false }
::= { dcRsvpProductEntry 44 }
dcRsvpProductFastRerouteCaps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies what fast reroute capabilities are enabled
on this node. This field is only valid if the fast
reroute extension is enabled in the
dcRsvpProductProtocolExtensions field above.
- PLR: Node provides fast reroute point of local repair
capability.
- MP: Node provides fast reroute merge point capability.
- DetourRestart: Node implements some protocol extensions
to recover detour fast reroute LSPs after a node restart
or an adjacent node restart. This flag is only valid if
detourFastReroute flag is set in the
dcRsvpProductProtocolExtensions field above.
- BypassRestart: Node implements some protocol extensions
to recover active backups of fast-reroute LSPs signalled
using the Facility method after a node restart or an
adjacent node restart. This flag is only valid if the
bypassFastReroute flag is set in the
dcRsvpProductProtocolExtensions field above. Note that
support for recovery of the protected LSP and inactive
downstream backups does not require any protocol extensions
and is provided by default.
Note that a node can still perform some FRR processing
even if both these flags are clear (at a detour transit
for instance)."
DEFVAL { 0 }
::= { dcRsvpProductEntry 45 }
dcRsvpProductFastRroutBkpRtryInt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this node is a PLR, this field specifies the period
that the node should wait before retrying the setup of a
backup LSP which failed last time because no route was
available. In the case that a backup LSP is set up but an
error is received from upstream, setup will be attempted
again immediately.
This field is only valid if this node is defined as PLR
capable in the _dcRsvpProductFastRerouteCapabilities_
field above."
DEFVAL { 30000 }
::= { dcRsvpProductEntry 46 }
dcRsvpProductErrorActionFlags OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used by DC-RSVP to determine whether it
should take any special action following certain types of
local errors. Each bit of this flags field corresponds to
an error and a corresponding action.
When one of these errors occurs, the relevant bit flag is
checked - if set, the specified action is taken; if not
set, the normal action is taken according the RSVP
protocol. The possible bit values are the following.
- eafTearStateOnLSIErr: When DC-RSVP receives a negative
response to an ATG_LDB_CONNECT_LSP_XC message on a UNI
node, the Path state is torn down."
DEFVAL { 0 }
::= { dcRsvpProductEntry 47 }
dcRsvpProductEnableNni OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2),
disabling(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate whether the local node supports NNI
signaling messages."
DEFVAL { disabled }
::= { dcRsvpProductEntry 48 }
dcRsvpProductBehaviorFlags OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies some detailed aspects of the behavior of
DC-RSVP. This field may be changed while _admin_status_
is AMB_ADMIN_STATUS_UP.
- enableTTLMatch: Whether to discard received RSVP
packets sent with the Router Alert option if the IP and
RSVP TTL values do not match. In certain circumstances
TTL comparison can identify RSVP service breaks, and allow
the discarding of packets that would otherwise disrupt
installed LSPs.
This option has no effect for Out Of Band operation.
This option should be left disabled for LSP hierarchy
operation (LSPs set up over existing LSPs) and for
Facility Fast Reroute (which sets up backup LSPs over
existing bypass LSPs)."
DEFVAL { 0 }
::= { dcRsvpProductEntry 49 }
dcRsvpProductLabelSetStyle OBJECT-TYPE
SYNTAX INTEGER {
excludeLabelHeader(1),
includeLabelHeader(2),
goingtoexclude(3),
goingtoinclude(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the style of LABEL_SET object that should be
used. RFCs 3741 and 3743 are unclear whether the
LABEL_SET object should include LABEL headers. The
correct interpretation is that the header should not be
present, but there are implementations that include the
LABEL header, so this option is included for compatibility
with these implementations.
- excludeLabelHeader: The LABEL_SET object contains
concatenated LABEL values without the object headers.
- includeLabelHeader: The LABEL_SET object contains
concatenated LABEL objects with the object headers."
DEFVAL { excludeLabelHeader }
::= { dcRsvpProductEntry 50 }
dcRsvpProductLabelSetOperStatus OBJECT-TYPE
SYNTAX INTEGER {
excludeLabelHeader(1),
includeLabelHeader(2),
goingToExclude(3),
goingToInclude(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status of Label Set style.
- excludeLabelHeader: The LABEL_SET object contains
concatenated LABEL values without the object headers.
- includeLabelHeader: The LABEL_SET object contains
concatenated LABEL objects with the object headers.
- goingToExclude: The Label Set Style is being changed
from includeLabelHeader to excludeLabelHeader.
- goingToInclude: The Label Set Style is being changed
from excludeLabelHeader to includeLabelHeader."
::= { dcRsvpProductEntry 51 }
dcRsvpProductLabelSetTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable traps for the Label
Set style oper_status object."
DEFVAL { false }
::= { dcRsvpProductEntry 52 }
dcRsvpProductLabelSetChngAct OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the action to take when the value of
dcRsvpProductLabelSetStyle is changed.
- leaveLSPs: All nodes should suppress refreshes and
switch to the new format while refreshes are suppressed.
- tearLSPs: Any LSPs using label sets will be deleted
before switching all nodes to the new format, and any new
LSPs using label sets will be dropped/rejected until the
switch is complete."
DEFVAL { 1 }
::= { dcRsvpProductEntry 53 }
dcRsvpProductExtPrtAdminStatus OBJECT-TYPE
SYNTAX DcRsvpAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired operational state of support for the extended
PROTECTION object defined in
draft-lang-ccamp-gmpls-recovery-e2e-signaling.
Support for end-to-end signalling is a separately licensable
component of DC-MPLS. This field must not be set to
AMB_ADMIN_STATUS_UP unless this has been licensed."
DEFVAL { adminStatusDown }
::= { dcRsvpProductEntry 54 }
dcRsvpProductUniIncSonetProfile OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is obsolete. The value in this field is
ignored by DC-RSVP for Test and Set commands. This field is
always set to 0 for Get responses."
DEFVAL { 0 }
::= { dcRsvpProductEntry 55 }
dcRsvpProductFrrFacAdminStatus OBJECT-TYPE
SYNTAX DcRsvpAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether backup LSPs can be put in place for LSPs
requesting FRR using the facility method.
Setting this to UP means that LSPs that request FRR using
the facility method can have protection at this node.
Existing LSPs that request FRR facility protection will have
protection put in place when the next Path refresh is
received.
Setting this to DOWN means that LSPs that request FRR using
the facility method will not be protected at this node.
Existing LSPs that have FRR facility protection will lose
that protection, and if the LSP had been rerouted to use the
backup LSP then the protected LSP will be lost.
This field replaces the bypassFastReroute flag on the protocol
extensions field in this MIB (although the bypassFastReroute flag
is still supported for backwards compatibility). It can be
modified while RSVP is oper_status UP or DOWN. When this field
is changed the bypassFastReroute flag is automatically modified
to mirror the change."
DEFVAL { adminStatusDown }
::= { dcRsvpProductEntry 56 }
dcRsvpProductFrrFacOperStatus OBJECT-TYPE
SYNTAX DcRsvpOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status for FRR Facility support.
When this is UP backup LSPs will be put in place, when this
is down backup LSPs will not be put in place and there will
be no LSPs that have backup LSPs."
::= { dcRsvpProductEntry 57 }
dcRsvpProductIpv6AdminStatus OBJECT-TYPE
SYNTAX DcRsvpAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the local node supports IPv6 LSPs.
Setting this to UP means that this node supports IPv6 LSPs
being set up to, from and through this node.
Setting this to DOWN means that IPv6 LSPs are NOT supported by
this node. Existing IPv6 LSPs for which this node is the
ingress, egress or transit are torn down.
This field can be modified while RSVP is oper_status UP or
DOWN.
The value of this field MUST match the value of the
dcMplsTeMibRsvpIpv6AdminStatus field in the
dcMplsTeMibEntityTable."
DEFVAL { adminStatusDown }
::= { dcRsvpProductEntry 58 }
dcRsvpProductIpv6OperStatus OBJECT-TYPE
SYNTAX DcRsvpOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status for IPv6 support. When
this is UP IPv6 LSPs can be set up to from or through this
node. When this is down there will be no active IPv6 LSPs."
::= { dcRsvpProductEntry 59 }
dcRsvpProductAPIIpv6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Management assigned IPv6 address used to identify the
(internal) LRAPI interface between RSVP and DC-TPM
components.
The configured API IPv6 address MUST not be a real address
in the network. It is recommended that this is set to a
non-zero reserved address value. This MUST be an address
with global scope. If multi-stack support is set to PHOP,
this address must be unique for each RSVP stack in the node.
The same address(es) can be used on all nodes in the network."
::= { dcRsvpProductEntry 60 }
dcRsvpProductExtPrtOperStatus OBJECT-TYPE
SYNTAX DcRsvpOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of support for the extended
PROTECTION object defined in
draft-lang-ccamp-gmpls-recovery-e2e-signaling."
DEFVAL { operStatusDown }
::= { dcRsvpProductEntry 61 }
dcRsvpProductRROHopType OBJECT-TYPE
SYNTAX INTEGER {
outLinkLabel(0), -- outgoing link ID + label(s)
teRouterId(1), -- TE router ID
upLink(2), -- upstream link ID
dnLinkLabel(3), -- downstream link ID
upLinkDnLinkLbl(4), -- up, down link ID + label(s)
rtIdDnLinkLbl(5), -- TE router, down link ID +
-- label(s)
upLinkRtrIdDnLinkLbl(6) -- up link, TE router, down link ID
-- + label(s)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of Recorded Route hop that DC-RSVP will insert on
any messages requesting Recorded Route information.
DC-RSVP uses the same hop type on all outgoing messages.
If the hop type is changed while LSPs are active, the new
hop type will be signaled on the next refresh message for
each LSP.
RRO hop types 1 through 6 are defined in RFC4990 section
6.1.3. RRO hop type 0 is the default behavior and
consists of the outgoing interface link ID followed by one
or more labels.
Currently DC-RSVP supports RRO hop types 0 and 4."
DEFVAL { outLinkLabel }
::= { dcRsvpProductEntry 62 }
dcRsvpProductBfdIndex OBJECT-TYPE
SYNTAX NumericIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the BFD product instance which this
DC-RSVP is to join to as its BFD interface provider. If
the value of this object is 0, DC-RSVP will not attempt to
join to a BFD provider."
DEFVAL { 0 }
::= { dcRsvpProductEntry 63 }
dcRsvpProductBfdBufPoolSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of pre-reserved buffers available for BFD
interface messages. This is used to ensure that the
establishment of many BFD sessions does not fail in buffer
shortage conditions."
DEFVAL { 4 }
::= {dcRsvpProductEntry 64 }
dcRsvpProductLspAttrAdminStatus OBJECT-TYPE
SYNTAX DcRsvpAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether the local node supports the
LSP_ATTRIBUTES object.
Setting this to UP means that this node supports LSPs with
the LSP_ATTRIBUTES object being set up to, from and
through this node.
Setting this to DOWN means that the LSP_ATTRIBUTES object
is NOT supported by this node. Existing LSPs with the
LSP_ATTRIBUTES object are torn down, and alarms may be
triggered.
This field can be modified while RSVP is oper_status UP or
DOWN.
The value of this field MUST match the value of the
dcMplsTeMibMplsOamAdminStatus field in the
dcMplsTeMibEntityTable."
DEFVAL { adminStatusDown }
::= { dcRsvpProductEntry 65 }
dcRsvpProductLspAttrOperStatus OBJECT-TYPE
SYNTAX DcRsvpOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of support for the
LSP_ATTRIBUTES object."
::= { dcRsvpProductEntry 66 }
dcRsvpProductI3Index OBJECT-TYPE
SYNTAX NumericIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the I3 entity with which this DC-RSVP entity
is to join to as its I3 interface provider. If this value
is not specified, DC-RSVP will use the
dcRsvpProductLsrIndex value, or if this is also not
specified, dcRsvpProductIndex as the LSR Index when
joining on the I3 interface.
This field follows the replaceOnlyWhileDisabled behavior."
DEFVAL { 0 }
::= { dcRsvpProductEntry 67 }
dcRsvpProductSckIndex OBJECT-TYPE
SYNTAX NumericIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the SCK entity with which this DC-RSVP entity
is to join to as its SCK interface provider. If this
value is not specified, DC-RSVP will use the
dcRsvpProductIndex as the Interface Index when joining on
the SCK interface.
This field follows the replaceOnlyWhileDisabled behavior."
DEFVAL { 0 }
::= { dcRsvpProductEntry 68 }
dcRsvpProductNhrIndex OBJECT-TYPE
SYNTAX NumericIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the NHR entity with which this DC-RSVP entity
is to join to as its NHR interface provider. If this
value is not specified, DC-RSVP will use the
dcRsvpProductLsrIndex value, or if this is also not
specified, dcRsvpProductIndex as the LSR Index when
joining on the NHR interface.
This field follows the replaceOnlyWhileDisabled behavior."
DEFVAL { 0 }
::= { dcRsvpProductEntry 69 }
dcRsvpProductWaitForHellos OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether DC-RSVP should suppress sending of Path
messages if gracefully restarting and there is no Hello
session up to the next hop.
If a Path message is suppressed, DC-RSVP starts the Path
refresh timer with interval equal to the rapid
retransmission interval so that the Path will be retried.
This behavior resolves a possible timing window in RSVP
graceful restart processing that can lead to LSPs failing
to be recovered if the initial Hello message is dropped.
Only used if _restart_capable_ is set to AMB_TRUE."
DEFVAL { false }
::= { dcRsvpProductEntry 70 }
dcRsvpProductForcePEOnEgrDel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Forces DC-RSVP to send a PathErr message upstream when
carrying out forced deletion of an LSP at the egress node.
If this field is AMB_TRUE then DC-RSVP will always send a
PathErr upstream with the PSR flag set and release all
state for a deleted LSP. This is the behavior defined in
the OIF 1.0 specification.
If this field is AMB_FALSE then DC-RSVP will do the
following.
- Follow the OIF 1.0 specification and send a PathErr if
the GUA object is present for the deleted LSP.
- Follow the IETF specification and send a ResvTear
upstream if the OIF GUA object is not present."
DEFVAL { false }
::= { dcRsvpProductEntry 71 }
dcRsvpProductFastRrtBkpSetupInt OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this node is a PLR, this field specifies the maximum
period that the node should wait on initiating the setup
of a backup LSP before sending a Resv message upstream for
the protected LSP.
A value of 0 means that the node should wait indefinitely.
This field is only valid if this node is defined as PLR
capable in the _dcRsvpProductFastRerouteCapabilities_
field above."
DEFVAL { 0 }
::= { dcRsvpProductEntry 72 }
-- Diagnostics table
-- This table is used to control diagnostic requests and responses.
dcRsvpDiagnosticTable OBJECT-TYPE
SYNTAX SEQUENCE OF DcRsvpDiagnosticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of sessions that are being diagnosed."
::= { dcRsvpObjects 2 }
dcRsvpDiagnosticEntry OBJECT-TYPE
SYNTAX DcRsvpDiagnosticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a session that is being diagnosed."
INDEX { dcRsvpDiagProductIndex,
dcRsvpDiagRequestIndex }
::= { dcRsvpDiagnosticTable 1 }
DcRsvpDiagnosticEntry ::= SEQUENCE {
dcRsvpDiagProductIndex DcRsvpIndex,
dcRsvpDiagRequestIndex DcRsvpDiagReqIndex,
dcRsvpDiagReqsInProgress Unsigned32,
dcRsvpDiagSessionEndPoint IpAddress,
dcRsvpDiagSessionTunnelId Unsigned32,
dcRsvpDiagSessionExtTunnelId Unsigned32,
dcRsvpDiagLastHop IpAddress,
dcRsvpDiagSender IpAddress,
dcRsvpDiagMaxHops Integer32,
dcRsvpDiagHopByHopReply TruthValue,
dcRsvpDiagRowStatus RowStatus
}
dcRsvpDiagProductIndex OBJECT-TYPE
SYNTAX DcRsvpIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the DC-RSVP product that is handling this query."
::= { dcRsvpDiagnosticEntry 1 }
dcRsvpDiagRequestIndex OBJECT-TYPE
SYNTAX DcRsvpDiagReqIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this dcRsvpDiagnosticEntry. This corresponds to a
particular session being diagnosed and is an arbitrary value,
defined on row creation."
::= { dcRsvpDiagnosticEntry 2 }
dcRsvpDiagReqsInProgress OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outstanding diagnostic requests relating to this
session."
::= { dcRsvpDiagnosticEntry 3 }
dcRsvpDiagSessionEndPoint OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the tunnel end point, from the LSP_TUNNEL_IPv4
session object."
::= { dcRsvpDiagnosticEntry 4 }
dcRsvpDiagSessionTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tunnel ID, from the LSP_TUNNEL_IPv4 session object."
::= { dcRsvpDiagnosticEntry 5 }
dcRsvpDiagSessionExtTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The extended tunnel ID, from the LSP_TUNNEL_IPv4 session object."
::= { dcRsvpDiagnosticEntry 6 }
dcRsvpDiagLastHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last hop to be queried. This is the address
to which the DREQ message is first sent."
::= { dcRsvpDiagnosticEntry 7 }
dcRsvpDiagSender OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the sender for the specified session."
::= { dcRsvpDiagnosticEntry 8 }
dcRsvpDiagMaxHops OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of hops to diagnose."
::= { dcRsvpDiagnosticEntry 9 }
dcRsvpDiagHopByHopReply OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag to indicate that DREPs should be returned hop-by-
hop using the reverse of the path taken by the DREQ."
::= { dcRsvpDiagnosticEntry 10 }
dcRsvpDiagRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to create or delete a DC-RSVP Diagnostic Table entry."
::= { dcRsvpDiagnosticEntry 11 }
-- Diagnostic node table
-- This table is used to present diagnostic information about nodes in a session.
dcRsvpDiagNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DcRsvpDiagNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of nodes within a session that is being diagnosed.
External management can extract information
from this table, but cannot modify information in it."
::= { dcRsvpObjects 3 }
dcRsvpDiagNodeEntry OBJECT-TYPE
SYNTAX DcRsvpDiagNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a node within a session that is being diagnosed."
INDEX { dcRsvpDiagNodeProductIndex,
dcRsvpDiagNodeRequestIndex,
dcRsvpDiagNodeIndex }
::= { dcRsvpDiagNodeTable 1 }
DcRsvpDiagNodeEntry ::= SEQUENCE {
dcRsvpDiagNodeProductIndex DcRsvpIndex,
dcRsvpDiagNodeRequestIndex DcRsvpDiagReqIndex,
dcRsvpDiagNodeIndex DcRsvpDiagNodeIndexType,
dcRsvpDiagNodeType DcRsvpDiagNodeTypeVal,
-- Below is the information that is returned in a DIAG_RESPONSE
dcRsvpDiagNodeDreqArrivalTime Unsigned32,
dcRsvpDiagNodeIncomingIfAddr IpAddress,
dcRsvpDiagNodeOutgoingIfAddr IpAddress,
dcRsvpDiagNodePrevHopAddr IpAddress,
dcRsvpDiagNodeDTTL Integer32,
dcRsvpDiagNodeMFlag TruthValue,
dcRsvpDiagNodeRErr Integer32,
dcRsvpDiagNodeKValue Integer32,
dcRsvpDiagNodeTimerValue Integer32,
-- Below are the objects that can be appended to a DIAG_RESPONSE
dcRsvpDiagRsvpHopAddr IpAddress,
dcRsvpDiagRsvpHopLIH Unsigned32,
dcRsvpDiagSenderTpltAddress IpAddress,
dcRsvpDiagSenderTpltLSPId Integer32,
-- Info from SENDER_TSPEC and ADSPEC is covered by RRI_FLOWSPEC
dcRsvpDiagFlowSpecCLBktRate Unsigned32,
dcRsvpDiagFlowSpecCLBktDep Unsigned32,
dcRsvpDiagFlowSpecCLPkDataRate Unsigned32,
dcRsvpDiagFlowSpecCLMinPolUnit Unsigned32,
dcRsvpDiagFlowSpecCLMaxPktSize Unsigned32,
dcRsvpDiagFlowSpecGQBktRate Unsigned32,
dcRsvpDiagFlowSpecGQBktDep Unsigned32,
dcRsvpDiagFlowSpecGQPkDataRate Unsigned32,
dcRsvpDiagFlowSpecGQMinPolUnit Unsigned32,
dcRsvpDiagFlowSpecGQMaxPktSize Unsigned32,
dcRsvpDiagFlowSpecGQRate Unsigned32,
dcRsvpDiagFlowSpecGQSlack Unsigned32,
dcRsvpDiagFlowSpecCoSCoS Integer32,
dcRsvpDiagFlowSpecCoSMTU Integer32,
dcRsvpDiagFilterSpecAddress IpAddress,
dcRsvpDiagFilterSpecLSPId Integer32,
dcRsvpDiagConfirmRcvAddr IpAddress,
dcRsvpDiagStyle Unsigned32
-- The SCOPE object is omitted
}
dcRsvpDiagNodeProductIndex OBJECT-TYPE
SYNTAX DcRsvpIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the DC-RSVP product that is handling this query."
::= { dcRsvpDiagNodeEntry 1 }
dcRsvpDiagNodeRequestIndex OBJECT-TYPE
SYNTAX DcRsvpDiagReqIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the corresponding request in dcRsvpDiagnosticTable."
::= { dcRsvpDiagNodeEntry 2 }
dcRsvpDiagNodeIndex OBJECT-TYPE
SYNTAX DcRsvpDiagNodeIndexType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this dcRsvpDiagNodeEntry. This is equivalent to the
hop number, with 1 being the ingress."
::= { dcRsvpDiagNodeEntry 3 }
dcRsvpDiagNodeType OBJECT-TYPE
SYNTAX DcRsvpDiagNodeTypeVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the node: ingress, transit, egress or missing. Missing
indicates that no diagnostic response has been received for this
node, and this entry may in fact represent more than one node."
::= { dcRsvpDiagNodeEntry 4 }
dcRsvpDiagNodeDreqArrivalTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The arrival time of the DREQ at the node, specified as a 32-bit
NTP timestamp."
::= { dcRsvpDiagNodeEntry 5 }
dcRsvpDiagNodeIncomingIfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface on which message from the sender
are expected to arrive at this node, or 0 if unknown."
::= { dcRsvpDiagNodeEntry 6 }
dcRsvpDiagNodeOutgoingIfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface through which the DREQ arrived
and to which messages flow from the given sender for the
specified session address, or 0 if unknown."
::= { dcRsvpDiagNodeEntry 7 }
dcRsvpDiagNodePrevHopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address from which this node receives RSVP PATH messages
for this source, or 0 if unknown. This is also the address to
which the DREQ was forwarded."
::= { dcRsvpDiagNodeEntry 8 }
dcRsvpDiagNodeDTTL OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IP hops traversed by the DREQ between the downstream
RSVP node and this node."
::= { dcRsvpDiagNodeEntry 9 }
dcRsvpDiagNodeMFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag that indicates whether the reservation described by the
response objects is merged with reservations from other downstream
interfaces before being forwarded upstream."
::= { dcRsvpDiagNodeEntry 10 }
dcRsvpDiagNodeRErr OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error conditions at this node.
Bit 3 indicates ROUTE object too big;
Bit 2 indicates packet too big;
Bit 1 indicates no PATH state.
Bit 1 is the least significant bit."
::= { dcRsvpDiagNodeEntry 11 }
dcRsvpDiagNodeKValue OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The refresh timer multiple."
::= { dcRsvpDiagNodeEntry 12 }
dcRsvpDiagNodeTimerValue OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local refresh timer value in seconds."
::= { dcRsvpDiagNodeEntry 13 }
dcRsvpDiagRsvpHopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hop address from the session's RSVP_HOP object."
::= { dcRsvpDiagNodeEntry 14 }
dcRsvpDiagRsvpHopLIH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LIH from the session's RSVP_HOP object."
::= { dcRsvpDiagNodeEntry 15 }
dcRsvpDiagSenderTpltAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address from the session's SENDER_TEMPLATE object."
::= { dcRsvpDiagNodeEntry 16 }
dcRsvpDiagSenderTpltLSPId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSP ID from the session's SENDER_TEMPLATE object."
::= { dcRsvpDiagNodeEntry 17 }
dcRsvpDiagFlowSpecCLBktRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load token bucket rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer."
::= { dcRsvpDiagNodeEntry 18 }
dcRsvpDiagFlowSpecCLBktDep OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load token bucket depth in bytes,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer."
::= { dcRsvpDiagNodeEntry 19 }
dcRsvpDiagFlowSpecCLPkDataRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load peak data rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer."
::= { dcRsvpDiagNodeEntry 20 }
dcRsvpDiagFlowSpecCLMinPolUnit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load minimum policed unit
from the session's RRI_FLOWSPEC object."
::= { dcRsvpDiagNodeEntry 21 }
dcRsvpDiagFlowSpecCLMaxPktSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load maximum packet size
from the session's RRI_FLOWSPEC object."
::= { dcRsvpDiagNodeEntry 22 }
dcRsvpDiagFlowSpecGQBktRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS token bucket rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer."
::= { dcRsvpDiagNodeEntry 23 }
dcRsvpDiagFlowSpecGQBktDep OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS token bucket depth in bytes,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer."
::= { dcRsvpDiagNodeEntry 24 }
dcRsvpDiagFlowSpecGQPkDataRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS peak data rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer."
::= { dcRsvpDiagNodeEntry 25 }
dcRsvpDiagFlowSpecGQMinPolUnit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS minimum policed unit
from the session's RRI_FLOWSPEC object."
::= { dcRsvpDiagNodeEntry 26 }
dcRsvpDiagFlowSpecGQMaxPktSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS maximum packet size
from the session's RRI_FLOWSPEC object."
::= { dcRsvpDiagNodeEntry 27 }
dcRsvpDiagFlowSpecGQRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS rate in bytes per second,
from the session's RRI_FLOWSPEC object.
This value is rounded to the nearest integer."
::= { dcRsvpDiagNodeEntry 28 }
dcRsvpDiagFlowSpecGQSlack OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS slack in microseconds,
from the session's RRI_FLOWSPEC object."
::= { dcRsvpDiagNodeEntry 29 }
dcRsvpDiagFlowSpecCoSCoS OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoS class of service from the session's RRI_FLOWSPEC object."
::= { dcRsvpDiagNodeEntry 30 }
dcRsvpDiagFlowSpecCoSMTU OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoS maximum packet size from the session's RRI_FLOWSPEC object."
::= { dcRsvpDiagNodeEntry 31 }
dcRsvpDiagFilterSpecAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address from the session's FILTER_SPEC object."
::= { dcRsvpDiagNodeEntry 32 }
dcRsvpDiagFilterSpecLSPId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSP ID from the session's FILTER_SPEC object."
::= { dcRsvpDiagNodeEntry 33 }
dcRsvpDiagConfirmRcvAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address from the session's CONFIRM object."
::= { dcRsvpDiagNodeEntry 34 }
dcRsvpDiagStyle OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The style word from the session's STYLE object."
::= { dcRsvpDiagNodeEntry 35 }
dcRsvpNotifications OBJECT IDENTIFIER ::= { dcRsvp 2 } -- traps
dcRsvpNotifyPrefix OBJECT IDENTIFIER ::= { dcRsvpNotifications 0 }
-- Notifications
rsvpLabelSetTrap NOTIFICATION-TYPE
OBJECTS {
dcRsvpProductLabelSetStyle,
dcRsvpProductLabelSetOperStatus
}
STATUS current
DESCRIPTION
"The rsvpLabelSetTrap structure is used when sending MIB
TRAPs from RSVP that are associated with the
dcRsvpProductLabelSetOperStatus. The values are taken from
the dcRsvpProductTable. The trap is sent when the
dcRsvpProductLabelSetOperStatus changes to a stable value if
the dcRsvpProductLabelSetTrapEnable field is set."
::= { dcRsvpNotifyPrefix 1 }
-- End of notifications
-- dcRsvpIf Table
-- This table is used to manage RSVP-TE interface parameters.
dcRsvpIfTable OBJECT-TYPE
-- FAMILY-SHORT-NAME dcRsvpIf
SYNTAX SEQUENCE OF DcRsvpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a RSVP-TE interface
parameters entity."
::= { dcRsvpObjects 4 }
dcRsvpIfEntry OBJECT-TYPE
SYNTAX DcRsvpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a RSVP-TE interface."
INDEX { dcRsvpIfProductIndex,
dcRsvpIfIndex }
::= { dcRsvpIfTable 1 }
DcRsvpIfEntry ::= SEQUENCE {
dcRsvpIfProductIndex DcRsvpIndex,
dcRsvpIfIndex Integer32,
dcRsvpIfName DisplayString,
dcRsvpIfRowStatus RowStatus,
dcRsvpIfAdminStatus DcRsvpAdminStatus,
dcRsvpIfOperStatus DcRsvpOperStatus,
dcRsvpIfUseRefrMsgs DcRsvpIfRefreshOption,
dcRsvpIfUseMessageIDs TruthValue,
dcRsvpIfRefreshInterval Integer32,
dcRsvpIfHelloPeriod Unsigned32,
dcRsvpIfHelloTolerance Unsigned32,
dcRsvpIfBfdEnabled Integer32,
dcRsvpIfPhpEnabled Integer32,
dcRsvpIfExplNullEnabled Integer32,
dcRsvpIfAdminGroup Integer32
}
dcRsvpIfProductIndex OBJECT-TYPE
SYNTAX DcRsvpIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for the RSVP-TE instance."
::= { dcRsvpIfEntry 1 }
dcRsvpIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Network interface index in the IF-MIB (RFC 2233) of the RSVP-TE interface."
::= { dcRsvpIfEntry 2 }
dcRsvpIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual name of the interface. The value of this
object is the name of the interface as assigned by the
local device and is suitable for use in commands entered
at the device's 'console'. This might be a text name,
such as 'le0' or a simple port number, such as '1',
depending on the interface naming syntax of the device.
It is unique per logical interface. Set to null if not
known."
::= { dcRsvpIfEntry 3 }
dcRsvpIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status for this RSVP-TE interface
table entry, used to create and destroy table entries."
::= { dcRsvpIfEntry 4 }
dcRsvpIfAdminStatus OBJECT-TYPE
SYNTAX DcRsvpAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrative status for this interface. When
dcRsvpIfRowStatus is set to 'active' and dcRsvpIfAdminStatus is
'up' this interface is advertised into DC-MPLS."
DEFVAL { adminStatusDown }
::= { dcRsvpIfEntry 5 }
dcRsvpIfOperStatus OBJECT-TYPE
SYNTAX DcRsvpOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current operational status of the RSVP-TE interface."
::= { dcRsvpIfEntry 6 }
dcRsvpIfUseRefrMsgs OBJECT-TYPE
SYNTAX DcRsvpIfRefreshOption
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the level of refresh reduction support to be
configured on this interface."
DEFVAL { 0 }
::= { dcRsvpIfEntry 7 }
dcRsvpIfUseMessageIDs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Message ID support should be configured
on this interface. Note that Refresh Reduction measures
cannot be used if Message ID support is not enabled for
that interface."
DEFVAL { false }
::= { dcRsvpIfEntry 8 }
dcRsvpIfRefreshInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The average interval, in milliseconds, between Path and
Resv refresh messages for LSPs which use this interface
for RSVP-signalled data.
A value of 0 indicates that the globally configured value
in the RSVP Product MIB table is used for this interface.
A value of -1 indicates that Path and Resv refresh
messages are not required on this interface."
DEFVAL { 30000 }
::= { dcRsvpIfEntry 9 }
dcRsvpIfHelloPeriod OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Default period in milliseconds between sending Hello
messages to all neighbors on this interface. If this is
set to 0, no Hello messages are sent by this interface."
DEFVAL { 0 }
::= { dcRsvpIfEntry 10 }
dcRsvpIfHelloTolerance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of hello periods which may pass without receiving a
successful Hello message from a partner before the Hello
session times out."
DEFVAL { 3 }
::= { dcRsvpIfEntry 11 }
dcRsvpIfBfdEnabled OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Bidirectional Forwarding Detection (BFD) is
enabled on this interface."
DEFVAL { 0 }
::= { dcRsvpIfEntry 12 }
dcRsvpIfPhpEnabled OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Penultimate Hop Popping (PHP) is
enabled on this interface."
DEFVAL { 1 }
::= { dcRsvpIfEntry 13 }
dcRsvpIfExplNullEnabled OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Explicit NULL is
enabled on this interface."
DEFVAL { 0 }
::= { dcRsvpIfEntry 14 }
dcRsvpIfAdminGroup OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RSVP-TE interface administrative group for this interface."
DEFVAL { 0 }
::= { dcRsvpIfEntry 15 }
-- end of dcRsvpIfTable
-- Module compliance.
-- conformance
dcRsvpConformance OBJECT IDENTIFIER ::= {dcRsvp 3 }
dcRsvpCompliances OBJECT IDENTIFIER ::= { dcRsvpConformance 1 }
dcRsvpGroups OBJECT IDENTIFIER ::= { dcRsvpConformance 2 }
dcRsvpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the DC-RSVP product MIB."
MODULE
GROUP dcRsvpProductGroup
DESCRIPTION
"Product Table Objects."
GROUP dcRsvpDiagGroup
DESCRIPTION
"Diagnostic Table Objects."
GROUP dcRsvpDiagNodeGroup
DESCRIPTION
"Diag Node Table Objects."
GROUP dcRsvpNotificationGroup
DESCRIPTION "This group is mandatory for those implementations
which can implement the notifications
contained in this group."
::= { dcRsvpCompliances 1 }
dcRsvpProductGroup OBJECT-GROUP
OBJECTS {
dcRsvpProductASNumber,
dcRsvpProductSenderTTL,
dcRsvpProductMinTimerPeriod,
dcRsvpProductAPIIfIndex,
dcRsvpProductAPIAddress,
dcRsvpProductAPIRefreshInterval,
dcRsvpProductLocalRepairDelay,
dcRsvpProductRefreshInterval,
dcRsvpProductRefreshMultiple,
dcRsvpProductRfrshSlewDenom,
dcRsvpProductRfrshSlewNumerator,
dcRsvpProductBlockadeMultiple,
dcRsvpProductSocketBufPoolSize,
dcRsvpProductSwitchBufPoolSize,
dcRsvpProductTeMibBufPoolSize,
dcRsvpProductRoutingBufPoolSize,
dcRsvpProductLSPSetupPriority,
dcRsvpProductLSPHoldingPriority,
dcRsvpProductAdminStatus,
dcRsvpProductOperStatus,
dcRsvpProductRowStatus,
dcRsvpProductLsrIndex,
dcRsvpProductTeMibIndex,
dcRsvpProductMultiStackSupport,
dcRsvpProductUseHopByHop,
dcRsvpProductUseNotify,
dcRsvpProductNotifyRRDecay,
dcRsvpProductNotifyRRInterval,
dcRsvpProductNotifyRRLimit,
dcRsvpProductAllowIPEncap,
dcRsvpProductProtocolExtensions,
dcRsvpProductPSRFlags,
dcRsvpProductInitPathRRDecay,
dcRsvpProductInitPathRRInterval,
dcRsvpProductInitPathRRLimit,
dcRsvpProductEnableUni,
dcRsvpProductRestartCapable,
dcRsvpProductRestartTime,
dcRsvpProductRecoveryTime,
dcRsvpProductMinPeerRestart,
dcRsvpProductGracefulDelTimeout,
dcRsvpProductEgressDelBehavior,
dcRsvpProductEnabUniConnSplicing,
dcRsvpProductFastRerouteCaps,
dcRsvpProductFastRroutBkpRtryInt,
dcRsvpProductErrorActionFlags,
dcRsvpProductEnableNni,
dcRsvpProductBehaviorFlags,
dcRsvpProductLabelSetStyle,
dcRsvpProductLabelSetOperStatus,
dcRsvpProductLabelSetTrapEnable,
dcRsvpProductLabelSetChngAct,
dcRsvpProductExtPrtAdminStatus,
dcRsvpProductUniIncSonetProfile,
dcRsvpProductFrrFacAdminStatus,
dcRsvpProductFrrFacOperStatus,
dcRsvpProductIpv6AdminStatus,
dcRsvpProductIpv6OperStatus,
dcRsvpProductAPIIpv6Address,
dcRsvpProductExtPrtOperStatus,
dcRsvpProductRROHopType,
dcRsvpProductBfdIndex,
dcRsvpProductBfdBufPoolSize,
dcRsvpProductLspAttrAdminStatus,
dcRsvpProductLspAttrOperStatus,
dcRsvpProductI3Index,
dcRsvpProductSckIndex,
dcRsvpProductNhrIndex,
dcRsvpProductWaitForHellos,
dcRsvpProductForcePEOnEgrDel,
dcRsvpProductFastRrtBkpSetupInt
}
STATUS current
DESCRIPTION
"Product Table Objects."
::= { dcRsvpGroups 2 }
dcRsvpDiagGroup OBJECT-GROUP
OBJECTS {
dcRsvpDiagReqsInProgress,
dcRsvpDiagSessionEndPoint,
dcRsvpDiagSessionTunnelId,
dcRsvpDiagSessionExtTunnelId,
dcRsvpDiagLastHop,
dcRsvpDiagSender,
dcRsvpDiagMaxHops,
dcRsvpDiagHopByHopReply,
dcRsvpDiagRowStatus
}
STATUS current
DESCRIPTION
"Diagnostic Table Objects."
::= { dcRsvpGroups 3 }
dcRsvpDiagNodeGroup OBJECT-GROUP
OBJECTS {
dcRsvpDiagNodeType,
dcRsvpDiagNodeDreqArrivalTime,
dcRsvpDiagNodeIncomingIfAddr,
dcRsvpDiagNodeOutgoingIfAddr,
dcRsvpDiagNodePrevHopAddr,
dcRsvpDiagNodeDTTL,
dcRsvpDiagNodeMFlag,
dcRsvpDiagNodeRErr,
dcRsvpDiagNodeKValue,
dcRsvpDiagNodeTimerValue,
dcRsvpDiagRsvpHopAddr,
dcRsvpDiagRsvpHopLIH,
dcRsvpDiagSenderTpltLSPId,
dcRsvpDiagSenderTpltAddress,
dcRsvpDiagFlowSpecCLBktRate,
dcRsvpDiagFlowSpecCLBktDep,
dcRsvpDiagFlowSpecCLPkDataRate,
dcRsvpDiagFlowSpecCLMinPolUnit,
dcRsvpDiagFlowSpecCLMaxPktSize,
dcRsvpDiagFlowSpecGQBktRate,
dcRsvpDiagFlowSpecGQBktDep,
dcRsvpDiagFlowSpecGQPkDataRate,
dcRsvpDiagFlowSpecGQMinPolUnit,
dcRsvpDiagFlowSpecGQMaxPktSize,
dcRsvpDiagFlowSpecGQRate,
dcRsvpDiagFlowSpecGQSlack,
dcRsvpDiagFlowSpecCoSCoS,
dcRsvpDiagFlowSpecCoSMTU,
dcRsvpDiagFilterSpecAddress,
dcRsvpDiagFilterSpecLSPId,
dcRsvpDiagConfirmRcvAddr,
dcRsvpDiagStyle
}
STATUS current
DESCRIPTION
"Diag Node Table Objects."
::= { dcRsvpGroups 4 }
dcRsvpNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
rsvpLabelSetTrap
}
STATUS current
DESCRIPTION
"Set of notifications implemented in this module.
None is mandatory."
::= { dcRsvpGroups 5 }
dcRsvpIfEntryGroup OBJECT-GROUP
OBJECTS {
dcRsvpIfName,
dcRsvpIfRowStatus,
dcRsvpIfAdminStatus,
dcRsvpIfOperStatus,
dcRsvpIfUseRefrMsgs,
dcRsvpIfUseMessageIDs,
dcRsvpIfRefreshInterval,
dcRsvpIfHelloPeriod,
dcRsvpIfHelloTolerance
}
STATUS current
DESCRIPTION
"RSVP-TE interface Table Objects."
::= { dcRsvpGroups 6 }
END
View Git Blame Copy Permalink