WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/lancom/LANCOM-GS2310PPLUS-MIB

16407 lines
512 KiB
Plaintext
Raw Blame History

LANCOM-GS2310PPLUS-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString,MacAddress FROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
ifIndex FROM RFC1213-MIB
enterprises,MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,Counter32,Counter64,IpAddress FROM SNMPv2-SMI
InetAddress FROM INET-ADDRESS-MIB
MacAddress FROM BRIDGE-MIB;
lancom-systems MODULE-IDENTITY
LAST-UPDATED "202002190000Z"
ORGANIZATION "LANCOM Systems GmbH."
CONTACT-INFO
"Adenauerstrasse 20 / B2, 52146 Wuerselen, Germany
Email: info@lancom.de
TEL: +49 (0)2405 49936 0
FAX: +49 (0)2405 49936 99"
DESCRIPTION
"The MIB module is for LANCOM Systems"
::= { enterprises 2356 }
switchingSystems OBJECT IDENTIFIER ::= { lancom-systems 800 }
gigabitEthernetSwitches OBJECT IDENTIFIER ::= { switchingSystems 3 }
lancomGS2310PPLUS OBJECT IDENTIFIER ::= { gigabitEthernetSwitches 2312 }
gs2310pplusSystem OBJECT IDENTIFIER ::= { lancomGS2310PPLUS 1 }
gs2310pplusSystemInformation OBJECT IDENTIFIER ::= { gs2310pplusSystem 1 }
gs2310pplusModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 1 }
gs2310pplusBIOSVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 2 }
gs2310pplusFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 3 }
gs2310pplusHardwareMechanicalVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 4 }
gs2310pplusSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 5 }
gs2310pplusHostMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 6 }
gs2310pplusConsoleBaudrate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 7 }
gs2310pplusRAMSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 8 }
gs2310pplusFlashSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 9 }
gs2310pplusBridgeFDBSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 10 }
gs2310pplusTransmitQueue OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 11 }
gs2310pplusMaximumFrameSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 12 }
gs2310pplusCPULoad OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 13 }
gs2310pplusSystemDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 21 }
gs2310pplusLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 22 }
gs2310pplusContact OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 23 }
gs2310pplusDeviceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 24 }
gs2310pplusSystemDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 25 }
gs2310pplusSystemUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 26 }
gs2310pplusSystemIPv4Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 27 }
gs2310pplusSystemIPv4SubnetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 28 }
gs2310pplusSystemIPv4Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 29 }
gs2310pplusIPv6LinkLocalAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 30 }
gs2310pplusIPv6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 31 }
gs2310pplusIPv6Prefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 32 }
gs2310pplusIPv6Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusSystemInformation 33 }
gs2310pplusLargestFreeMemBlock OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Largest free memory block in Kb"
::= { gs2310pplusSystemInformation 1500 }
gs2310pplusMemFree OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free memory in Kb"
::= { gs2310pplusSystemInformation 1501 }
gs2310pplusSystemTime OBJECT IDENTIFIER ::= { gs2310pplusSystem 2 }
gs2310pplusSystemTimeManual OBJECT IDENTIFIER ::= { gs2310pplusSystemTime 1 }
gs2310pplusSystemTimeManualClockSource OBJECT-TYPE
SYNTAX INTEGER {useLocal(0),useNTP(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0 : Use Local Settings,
1 : Use NTP Server."
::= { gs2310pplusSystemTimeManual 1 }
gs2310pplusSystemTimeManualLocaltime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the system time of the device.
The input format is 'Year-Month-Day Hour:Minute:Second'.
ex: 2011-01-01 05:43:05 means 2011/1/1 - 05:43:05 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59,
Sec : 0 - 59."
::= { gs2310pplusSystemTimeManual 2 }
gs2310pplusSystemTimeManualTimeZoneOffset OBJECT-TYPE
SYNTAX INTEGER(-720..780)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Time Zone.
The value range is between -720 and 780 (minutes)."
::= { gs2310pplusSystemTimeManual 3 }
gs2310pplusSystemTimeManualDaylightSavings OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0 : Disable,
1 : Enable."
::= { gs2310pplusSystemTimeManual 4 }
gs2310pplusSystemTimeManualTimeSetOffset OBJECT-TYPE
SYNTAX Integer32(1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time.
The value range is between 1 and 1440 (minutes),
Default : 60 (minutes)."
::= { gs2310pplusSystemTimeManual 5 }
gs2310pplusSystemTimeManualDaylightSavingsType OBJECT-TYPE
SYNTAX INTEGER { byDates(0), recurring(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0 : By dates,
1 : Recurring."
::= { gs2310pplusSystemTimeManual 6 }
gs2310pplusSystemTimeManualDaylightSavingsBydatesFrom OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Start time of By dates Daylight Savings.
The input format is 'Year-Month-Day Hour:Minute'.
ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59."
::= { gs2310pplusSystemTimeManual 7 }
gs2310pplusSystemTimeManualDaylightSavingsBydatesTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the End time of By dates Daylight Savings.
The input format is 'Year-Month-Day Hour:Minute'.
ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59."
::= { gs2310pplusSystemTimeManual 8 }
gs2310pplusSystemTimeManualDaylightSavingsRecurringDayFrom OBJECT-TYPE
SYNTAX INTEGER {
sunday(0),
monday(1),
tuseday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Day From.
0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat."
::= { gs2310pplusSystemTimeManual 9 }
gs2310pplusSystemTimeManualDaylightSavingsRecurringWeekFrom OBJECT-TYPE
SYNTAX INTEGER{
firstWeek(1),
secondWeek(2),
thirdWeek(3),
fourthWeek(4),
listWeek(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Week From.
1 : first week, 2, 3, 4, 5 : last week"
::= { gs2310pplusSystemTimeManual 10 }
gs2310pplusSystemTimeManualDaylightSavingsRecurringMonthFrom OBJECT-TYPE
SYNTAX INTEGER {
jan(1),
feb(2),
mar(3),
apr(4),
may(5),
jun(6),
jul(7),
aug(8),
sep(9),
oct(10),
nov(11),
dec(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Month From.
1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun,
7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec."
::= { gs2310pplusSystemTimeManual 11 }
gs2310pplusSystemTimeManualDaylightSavingsRecurringTimeFrom OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Start time of By dates Daylight Savings.
The input format is 'Hour:Minute'.
ex: 05:43.
The value range:
Hour : 0 - 23,
Minute : 0 - 59."
::= { gs2310pplusSystemTimeManual 12 }
gs2310pplusSystemTimeManualDaylightSavingsRecurringDayTo OBJECT-TYPE
SYNTAX INTEGER {
sunday(0),
monday(1),
tuseday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Day To.
0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat."
::= { gs2310pplusSystemTimeManual 13 }
gs2310pplusSystemTimeManualDaylightSavingsRecurringWeekTo OBJECT-TYPE
SYNTAX INTEGER{
firstWeek(1),
secondWeek(2),
thirdWeek(3),
fourthWeek(4),
listWeek(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Week To.
1 : first week, 2, 3, 4, 5 : last week"
::= { gs2310pplusSystemTimeManual 14 }
gs2310pplusSystemTimeManualDaylightSavingsRecurringMonthTo OBJECT-TYPE
SYNTAX INTEGER {
jan(1),
feb(2),
mar(3),
apr(4),
may(5),
jun(6),
jul(7),
aug(8),
sep(9),
oct(10),
nov(11),
dec(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Month To.
1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun,
7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec."
::= { gs2310pplusSystemTimeManual 15 }
gs2310pplusSystemTimeManualDaylightSavingsRecurringTimeTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Start time of By dates Daylight Savings.
The input format is 'Hour:Minute'.
ex: 05:43.
The value range:
Hour : 0 - 23,
Minute : 0 - 59."
::= { gs2310pplusSystemTimeManual 16 }
gs2310pplusSystemTimeNTP OBJECT IDENTIFIER ::= { gs2310pplusSystemTime 2 }
gs2310pplusSystemTimeNTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSSystemTimeNTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSystemTimeNTP 1 }
gs2310pplusSystemTimeNTPEntry OBJECT-TYPE
SYNTAX GS2310PPLUSSystemTimeNTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSystemTimeNTPIndex }
::= { gs2310pplusSystemTimeNTPTable 1 }
GS2310PPLUSSystemTimeNTPEntry ::= SEQUENCE {
gs2310pplusSystemTimeNTPIndex Integer32,
gs2310pplusSystemTimeNTPServerIPType INTEGER,
gs2310pplusSystemTimeNTPServer DisplayString,
gs2310pplusSystemTimeNTPCurrentMode INTEGER
}
gs2310pplusSystemTimeNTPIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of the ntp entry. "
::= { gs2310pplusSystemTimeNTPEntry 1 }
gs2310pplusSystemTimeNTPServerIPType OBJECT-TYPE
SYNTAX INTEGER { ipv4(0), ipv6(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default: 0,
0 : IPv4,
1 : IPv6."
::= { gs2310pplusSystemTimeNTPEntry 2 }
gs2310pplusSystemTimeNTPServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Time Server1. You can use the IP address or domain name."
::= { gs2310pplusSystemTimeNTPEntry 3 }
gs2310pplusSystemTimeNTPCurrentMode OBJECT-TYPE
SYNTAX INTEGER { empty(0), active(1), edit(2), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: Empty
1: Active
2: Edit
3: Delete"
::= { gs2310pplusSystemTimeNTPEntry 4 }
gs2310pplusSystemTimeNTPRequestInterval OBJECT-TYPE
SYNTAX INTEGER(60..999999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Request Interval.
Default : 86400.
The value range is between 60 and 999999999 (seconds)."
::= { gs2310pplusSystemTimeNTP 2 }
gs2310pplusSystemTimeNTPTriesNumber OBJECT-TYPE
SYNTAX INTEGER(0..999999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Number of tries.
Default : 4.
The value range is between 0 and 999999999."
::= { gs2310pplusSystemTimeNTP 3 }
gs2310pplusSystemAccount OBJECT IDENTIFIER ::= { gs2310pplusSystem 3 }
gs2310pplusSystemAccountUsers OBJECT IDENTIFIER ::= { gs2310pplusSystemAccount 1 }
gs2310pplusSystemAccountUserCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create a user account"
::= { gs2310pplusSystemAccountUsers 1 }
gs2310pplusSystemAccountUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSSystemAccountUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSystemAccountUsers 2 }
gs2310pplusSystemAccountUsersEntry OBJECT-TYPE
SYNTAX GS2310PPLUSSystemAccountUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusUserIndex }
::= { gs2310pplusSystemAccountUsersTable 1 }
GS2310PPLUSSystemAccountUsersEntry ::= SEQUENCE {
gs2310pplusUserIndex Integer32 ,
gs2310pplusUserName DisplayString,
gs2310pplusPassword DisplayString,
gs2310pplusUserPrivilegeLevel Integer32 ,
gs2310pplusAccountUserRowStatus INTEGER
}
gs2310pplusUserIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSystemAccountUsersEntry 1 }
gs2310pplusUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Please use a combination of letters, numbers and underscores"
::= { gs2310pplusSystemAccountUsersEntry 2 }
gs2310pplusPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Please use ASCII printable code except Quotation mark, Colon (punctuation), Less-than sign, Greater-than sign, At sign, Question mark and Space (punctuation)"
::= { gs2310pplusSystemAccountUsersEntry 3 }
gs2310pplusUserPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:1
User privilege level range : 1 - 15"
::= { gs2310pplusSystemAccountUsersEntry 4 }
gs2310pplusAccountUserRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2310pplusSystemAccountUsersEntry 5 }
gs2310pplusSystemAccountUsersSuperUserPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Super-User Password"
::= { gs2310pplusSystemAccountUsers 1500 }
gs2310pplusSystemAccountEnforcePasswordRules OBJECT-TYPE
SYNTAX INTEGER { yes(0), no(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : Do not enforce rules
1 : enforce rules"
::= { gs2310pplusSystemAccountUsers 1501 }
gs2310pplusSystemAccountPrivilegeLevel OBJECT IDENTIFIER ::= { gs2310pplusSystemAccount 2 }
gs2310pplusAccountPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 1 }
gs2310pplusAggregationPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 2 }
gs2310pplusDiagnosticsPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 3 }
gs2310pplusEEEPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 4 }
gs2310pplusEasyportPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 9 }
gs2310pplusGARPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 10 }
gs2310pplusGVRPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 11 }
gs2310pplusIPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 12 }
gs2310pplusIPMCSnoopingPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 13 }
gs2310pplusLACPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 14 }
gs2310pplusLLDPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 15 }
gs2310pplusLLDPMEDPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 16 }
gs2310pplusLoopProtectPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 17 }
gs2310pplusMACTablePrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 18 }
gs2310pplusMVRPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 22 }
gs2310pplusMaintenancePrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 24 }
gs2310pplusMirroringPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 25 }
gs2310pplusPortsPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 27 }
gs2310pplusPrivateVLANsPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 28 }
gs2310pplusQoSPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 29 }
gs2310pplusSFlowPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 30 }
gs2310pplusSMTPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 31 }
gs2310pplusSNMPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 32 }
gs2310pplusSecurityPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 33 }
gs2310pplusSingleIPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 34 }
gs2310pplusSpanningTreePrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 35 }
gs2310pplusSystemPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 36 }
gs2310pplusTrapEventPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 37 }
gs2310pplusUPnPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 38 }
gs2310pplusVCLPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 39 }
gs2310pplusVLANsPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 41 }
gs2310pplusVoiceVLANPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 42 }
gs2310pplusPOEPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2310pplusSystemAccountPrivilegeLevel 43 }
gs2310pplusIP OBJECT IDENTIFIER ::= { gs2310pplusSystem 4 }
gs2310pplusIPv4 OBJECT IDENTIFIER ::= { gs2310pplusIP 1 }
gs2310pplusIPv4Configured OBJECT IDENTIFIER ::= { gs2310pplusIPv4 1 }
gs2310pplusIpv4DHCPClient OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:0
0: disable
1: enable"
::= { gs2310pplusIPv4Configured 1 }
gs2310pplusIPv4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv4Configured 2 }
gs2310pplusIPv4Mask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv4Configured 3 }
gs2310pplusIPv4Gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv4Configured 4 }
gs2310pplusIPv4VLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:1"
::= { gs2310pplusIPv4Configured 5 }
gs2310pplusIPv4DNSServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv4Configured 6 }
gs2310pplusIPv4DNSProxy OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:disable, 1:enable "
::= { gs2310pplusIPv4Configured 7 }
gs2310pplusIPv4Current OBJECT IDENTIFIER ::= { gs2310pplusIPv4 2 }
gs2310pplusIpv4CurrentDHCPClient OBJECT-TYPE
SYNTAX INTEGER { none(0), renew(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:0
0: none (for read)
1: renew"
::= { gs2310pplusIPv4Current 1 }
gs2310pplusIPv4CurrentAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv4Current 2 }
gs2310pplusIPv4CurrentMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv4Current 3 }
gs2310pplusIPv4CurrentGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv4Current 4 }
gs2310pplusIPv4CurrentVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"default:1"
::= { gs2310pplusIPv4Current 5 }
gs2310pplusIPv4CurrentDNSServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv4Current 6 }
gs2310pplusIPv6 OBJECT IDENTIFIER ::= { gs2310pplusIP 2 }
gs2310pplusIPv6Configured OBJECT IDENTIFIER ::= { gs2310pplusIPv6 1 }
gs2310pplusIpv6AutoConfiguration OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:0
0: disable
1: enable"
::= { gs2310pplusIPv6Configured 1 }
gs2310pplusIpv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv6Configured 2 }
gs2310pplusIpv6Prefix OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 96"
::= { gs2310pplusIPv6Configured 3 }
gs2310pplusIpv6Gateway OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPv6Configured 4 }
gs2310pplusIPv6Current OBJECT IDENTIFIER ::= { gs2310pplusIPv6 2 }
gs2310pplusIpv6CurrentAutoConfiguration OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"default:0
0: disable
1: enable"
::= { gs2310pplusIPv6Current 1 }
gs2310pplusIpv6CurrentAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv6Current 2 }
gs2310pplusIpv6CurrentLinkLocalAddress OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv6Current 3 }
gs2310pplusIpv6CurrentPrefix OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusIPv6Current 4 }
gs2310pplusIpv6CurrentGateway OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPv6Current 5 }
gs2310pplusSyslog OBJECT IDENTIFIER ::= { gs2310pplusSystem 5 }
gs2310pplusSyslogConf OBJECT IDENTIFIER ::= { gs2310pplusSyslog 1 }
gs2310pplusServerMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusSyslogConf 1 }
gs2310pplusServerAddress1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSyslogConf 2 }
gs2310pplusServerAddress2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSyslogConf 3 }
gs2310pplusSyslogLevel OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 6 (Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusSyslogConf 4 }
gs2310pplusSyslogDetailedInfo OBJECT IDENTIFIER ::= { gs2310pplusSyslog 2 }
gs2310pplusSyslogDetailedInfoClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Clear Syslog"
::= { gs2310pplusSyslogDetailedInfo 1 }
gs2310pplusSyslogDetailedInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSSyslogDetailedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSyslogDetailedInfo 2 }
gs2310pplusSyslogDetailedInfoEntry OBJECT-TYPE
SYNTAX GS2310PPLUSSyslogDetailedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSyslogDetailedInfoIndex }
::= { gs2310pplusSyslogDetailedInfoTable 1 }
GS2310PPLUSSyslogDetailedInfoEntry ::= SEQUENCE {
gs2310pplusSyslogDetailedInfoIndex Integer32,
gs2310pplusSyslogDetailedInfoLevel DisplayString,
gs2310pplusSyslogDetailedInfoTime DisplayString,
gs2310pplusSyslogDetailedInfoMessage DisplayString
}
gs2310pplusSyslogDetailedInfoIndex OBJECT-TYPE
SYNTAX Integer32(1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSyslogDetailedInfoEntry 1 }
gs2310pplusSyslogDetailedInfoLevel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSyslogDetailedInfoEntry 2 }
gs2310pplusSyslogDetailedInfoTime OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSyslogDetailedInfoEntry 3 }
gs2310pplusSyslogDetailedInfoMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSyslogDetailedInfoEntry 4 }
gs2310pplusSnmp OBJECT IDENTIFIER ::= { gs2310pplusSystem 6 }
gs2310pplusSnmpConf OBJECT IDENTIFIER ::= { gs2310pplusSnmp 1 }
gs2310pplusGetCommunityMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the get-community mode of the SNMP.
default : 1, 0: disable, 1: enable. "
::= { gs2310pplusSnmpConf 1 }
gs2310pplusGetCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the get-community of the SNMP."
::= { gs2310pplusSnmpConf 2 }
gs2310pplusSetCommunityMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the set-community mode of the SNMP.
default : 1, 0: disable, 1: enable. "
::= { gs2310pplusSnmpConf 3 }
gs2310pplusSetCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the set-community of the SNMP."
::= { gs2310pplusSnmpConf 4 }
gs2310pplusGetCommunityConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSGetCommunityConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show get-community of the SNMP. "
::= { gs2310pplusSnmpConf 5 }
gs2310pplusGetCommunityConfEntry OBJECT-TYPE
SYNTAX GS2310PPLUSGetCommunityConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusCommunityConfIndex }
::= { gs2310pplusGetCommunityConfTable 1 }
GS2310PPLUSGetCommunityConfEntry ::= SEQUENCE {
gs2310pplusCommunityConfIndex Integer32,
gs2310pplusCommunityConfGetCommunity DisplayString
}
gs2310pplusCommunityConfIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" index, range : 1 - 5. "
::= { gs2310pplusGetCommunityConfEntry 1 }
gs2310pplusCommunityConfGetCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Get/Set the get-community of the SNMP."
::= { gs2310pplusGetCommunityConfEntry 2 }
gs2310pplusTrapHostConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSTrapHostConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of trap host entry. The numbers of entries are given by the value of gs2310pplusTrapHostConfNumber."
::= { gs2310pplusSnmpConf 6 }
gs2310pplusTrapHostConfEntry OBJECT-TYPE
SYNTAX GS2310PPLUSTrapHostConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the entry information for trap host."
INDEX { gs2310pplusTrapHostConfIndex }
::= { gs2310pplusTrapHostConfTable 1 }
GS2310PPLUSTrapHostConfEntry ::= SEQUENCE {
gs2310pplusTrapHostConfIndex Integer32,
gs2310pplusTrapHostConfVersion INTEGER,
gs2310pplusTrapHostConfIPType INTEGER,
gs2310pplusTrapHostConfIP DisplayString,
gs2310pplusTrapHostConfPort Integer32,
gs2310pplusTrapHostConfCommunity DisplayString,
gs2310pplusTrapHostConfSeverityLevel INTEGER,
gs2310pplusTrapHostConfSecurityLevel INTEGER,
gs2310pplusTrapHostConfAuthPtc INTEGER,
gs2310pplusTrapHostConfAuthPassword DisplayString,
gs2310pplusTrapHostConfPrivPtc INTEGER,
gs2310pplusTrapHostConfPrivPassword DisplayString,
gs2310pplusTrapHostConfCurrentMode INTEGER
}
gs2310pplusTrapHostConfIndex OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of the trap host entry. "
::= { gs2310pplusTrapHostConfEntry 1 }
gs2310pplusTrapHostConfVersion OBJECT-TYPE
SYNTAX INTEGER { snmpv2c(2), snmpv3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)"
::= { gs2310pplusTrapHostConfEntry 2 }
gs2310pplusTrapHostConfIPType OBJECT-TYPE
SYNTAX INTEGER { ipv4(4), ipv6(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Server IP Type. Default: 4,
4 : IPv4,
6 : IPv6."
::= { gs2310pplusTrapHostConfEntry 3 }
gs2310pplusTrapHostConfIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP of the trap host."
::= { gs2310pplusTrapHostConfEntry 4 }
gs2310pplusTrapHostConfPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the receiving-port number of the trap host.
range : 1 - 65535."
::= { gs2310pplusTrapHostConfEntry 5 }
gs2310pplusTrapHostConfCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The community/security name for the trap PDU."
::= { gs2310pplusTrapHostConfEntry 6 }
gs2310pplusTrapHostConfSeverityLevel OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Severity Level.
0 : Emerg, 1 : Alert, 2 : Critical, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug."
::= { gs2310pplusTrapHostConfEntry 7 }
gs2310pplusTrapHostConfSecurityLevel OBJECT-TYPE
SYNTAX INTEGER { noAuthNoPriv(1), authNoPriv(2), authPriv(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv.
1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv.
Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv)."
::= { gs2310pplusTrapHostConfEntry 8 }
gs2310pplusTrapHostConfAuthPtc OBJECT-TYPE
SYNTAX INTEGER { md5(1), sha(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Protocol, there are SHA and MD5 supported presently.
1 : MD5, 2 : SHA."
::= { gs2310pplusTrapHostConfEntry 9 }
gs2310pplusTrapHostConfAuthPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters.
If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters."
::= { gs2310pplusTrapHostConfEntry 10 }
gs2310pplusTrapHostConfPrivPtc OBJECT-TYPE
SYNTAX INTEGER { des(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Privacy Protocol, which is used in AuthPriv. Only supports DES.
An empty string will be returned if the security level is not 3(AuthPriv).
1 : DES."
::= { gs2310pplusTrapHostConfEntry 11 }
gs2310pplusTrapHostConfPrivPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters."
::= { gs2310pplusTrapHostConfEntry 12 }
gs2310pplusTrapHostConfCurrentMode OBJECT-TYPE
SYNTAX INTEGER { empty(0), active(1), edit(2), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:Empty, 1:Active mode, 2:Edit mode, 3:Delete."
::= { gs2310pplusTrapHostConfEntry 13 }
gs2310pplusSnmpSystem OBJECT IDENTIFIER ::= { gs2310pplusSnmp 2 }
gs2310pplusSnmpState OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the state of the SNMP.
default : 1, 0: disable, 1: enable. "
::= { gs2310pplusSnmpSystem 1 }
gs2310pplusSnmpEngineID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(5..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Engine ID of the SNMP.
An SNMP engine's administratively-unique identifier."
::= { gs2310pplusSnmpSystem 2 }
gs2310pplusSnmpCommunities OBJECT IDENTIFIER ::= { gs2310pplusSnmp 3 }
gs2310pplusSnmpCommunitiesCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2310pplusSnmpCommunities 1 }
gs2310pplusSnmpCommunitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSSnmpCommunitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv1/v2 Communities entry."
::= { gs2310pplusSnmpCommunities 2 }
gs2310pplusSnmpCommunitiesEntry OBJECT-TYPE
SYNTAX GS2310PPLUSSnmpCommunitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSnmpCommunitiesIndex }
::= { gs2310pplusSnmpCommunitiesTable 1 }
GS2310PPLUSSnmpCommunitiesEntry ::= SEQUENCE {
gs2310pplusSnmpCommunitiesIndex Integer32,
gs2310pplusSnmpCommunitiesCommunity DisplayString,
gs2310pplusSnmpCommunitiesUserName DisplayString,
gs2310pplusSnmpCommunitiesSourceIP IpAddress,
gs2310pplusSnmpCommunitiesSourceMask IpAddress,
gs2310pplusSnmpCommunitiesRowStatus INTEGER
}
gs2310pplusSnmpCommunitiesIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSnmpCommunitiesEntry 1 }
gs2310pplusSnmpCommunitiesCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Community."
::= { gs2310pplusSnmpCommunitiesEntry 2 }
gs2310pplusSnmpCommunitiesUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 32 characters describing User Name. "
::= { gs2310pplusSnmpCommunitiesEntry 3 }
gs2310pplusSnmpCommunitiesSourceIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" SNMP access source ip. "
::= { gs2310pplusSnmpCommunitiesEntry 4 }
gs2310pplusSnmpCommunitiesSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" SNMP access source address mask. "
::= { gs2310pplusSnmpCommunitiesEntry 5 }
gs2310pplusSnmpCommunitiesRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2310pplusSnmpCommunitiesEntry 6 }
gs2310pplusSnmpUsers OBJECT IDENTIFIER ::= { gs2310pplusSnmp 4 }
gs2310pplusSnmpUsersCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2310pplusSnmpUsers 1 }
gs2310pplusSnmpUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSSnmpUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv3 users entry."
::= { gs2310pplusSnmpUsers 2 }
gs2310pplusSnmpUsersEntry OBJECT-TYPE
SYNTAX GS2310PPLUSSnmpUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSnmpUsersIndex }
::= { gs2310pplusSnmpUsersTable 1 }
GS2310PPLUSSnmpUsersEntry ::= SEQUENCE {
gs2310pplusSnmpUsersIndex Integer32,
gs2310pplusSnmpUsersUserName DisplayString,
gs2310pplusSnmpUsersSecurityLevel INTEGER,
gs2310pplusSnmpUsersAuthenticationProtocol INTEGER,
gs2310pplusSnmpUsersAuthenticationPassword DisplayString,
gs2310pplusSnmpUsersPrivacyProtocol INTEGER,
gs2310pplusSnmpUsersPrivacyPassword DisplayString,
gs2310pplusSnmpUsersRowStatus INTEGER
}
gs2310pplusSnmpUsersIndex OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSnmpUsersEntry 1 }
gs2310pplusSnmpUsersUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing User Name."
::= { gs2310pplusSnmpUsersEntry 2 }
gs2310pplusSnmpUsersSecurityLevel OBJECT-TYPE
SYNTAX INTEGER { noauthnopriv(1), authnopriv(2), authpriv(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: No authentication and no privacy.
2: Authentication and no privacy.
3: Authentication and privacy. "
::= { gs2310pplusSnmpUsersEntry 3 }
gs2310pplusSnmpUsersAuthenticationProtocol OBJECT-TYPE
SYNTAX INTEGER { none(0), md5(1), sha(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: None.
1: MD5.
2: SHA "
::= { gs2310pplusSnmpUsersEntry 4 }
gs2310pplusSnmpUsersAuthenticationPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Authentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters.
If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters. "
::= { gs2310pplusSnmpUsersEntry 5 }
gs2310pplusSnmpUsersPrivacyProtocol OBJECT-TYPE
SYNTAX INTEGER { none(0), des(1), aes(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: None.
1: DES.
2: AES
This is the Privacy Protocol, which is used in AuthPriv.
An empty string will be returned if the security level is not 3(AuthPriv) "
::= { gs2310pplusSnmpUsersEntry 6 }
gs2310pplusSnmpUsersPrivacyPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters. "
::= { gs2310pplusSnmpUsersEntry 7 }
gs2310pplusSnmpUsersRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2310pplusSnmpUsersEntry 8 }
gs2310pplusSnmpGroups OBJECT IDENTIFIER ::= { gs2310pplusSnmp 5 }
gs2310pplusSnmpGroupsCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2310pplusSnmpGroups 1 }
gs2310pplusSnmpGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSSnmpGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv3 groups entry."
::= { gs2310pplusSnmpGroups 2 }
gs2310pplusSnmpGroupsEntry OBJECT-TYPE
SYNTAX GS2310PPLUSSnmpGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSnmpGroupsIndex }
::= { gs2310pplusSnmpGroupsTable 1 }
GS2310PPLUSSnmpGroupsEntry ::= SEQUENCE {
gs2310pplusSnmpGroupsIndex Integer32,
gs2310pplusSnmpGroupsSecurityModel INTEGER,
gs2310pplusSnmpGroupsSecurityName DisplayString,
gs2310pplusSnmpGroupsGroupName DisplayString,
gs2310pplusSnmpGroupsRowStatus INTEGER
}
gs2310pplusSnmpGroupsIndex OBJECT-TYPE
SYNTAX Integer32(1..14)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSnmpGroupsEntry 1 }
gs2310pplusSnmpGroupsSecurityModel OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2c(2), usm(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: v1.
2: v2c.
3: usm."
::= { gs2310pplusSnmpGroupsEntry 2 }
gs2310pplusSnmpGroupsSecurityName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing User Name."
::= { gs2310pplusSnmpGroupsEntry 3 }
gs2310pplusSnmpGroupsGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Group Name."
::= { gs2310pplusSnmpGroupsEntry 4 }
gs2310pplusSnmpGroupsRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2310pplusSnmpGroupsEntry 5 }
gs2310pplusSnmpViews OBJECT IDENTIFIER ::= { gs2310pplusSnmp 6 }
gs2310pplusSnmpViewsCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2310pplusSnmpViews 1 }
gs2310pplusSnmpViewsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSSnmpViewsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv1/v2 Views entry."
::= { gs2310pplusSnmpViews 2 }
gs2310pplusSnmpViewsEntry OBJECT-TYPE
SYNTAX GS2310PPLUSSnmpViewsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSnmpViewsIndex }
::= { gs2310pplusSnmpViewsTable 1 }
GS2310PPLUSSnmpViewsEntry ::= SEQUENCE {
gs2310pplusSnmpViewsIndex Integer32,
gs2310pplusSnmpViewsName DisplayString,
gs2310pplusSnmpViewsType INTEGER,
gs2310pplusSnmpViewsOIDSubtree DisplayString,
gs2310pplusSnmpViewsRowStatus INTEGER
}
gs2310pplusSnmpViewsIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSnmpViewsEntry 1 }
gs2310pplusSnmpViewsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing view Name."
::= { gs2310pplusSnmpViewsEntry 2 }
gs2310pplusSnmpViewsType OBJECT-TYPE
SYNTAX INTEGER { included(1), excluded(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: included, An optional flag to indicate that this view subtree should be included.
2: excluded, An optional flag to indicate that this view subtree should be excluded."
::= { gs2310pplusSnmpViewsEntry 3 }
gs2310pplusSnmpViewsOIDSubtree OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OID defining the root of the subtree to add to the named view."
::= { gs2310pplusSnmpViewsEntry 4 }
gs2310pplusSnmpViewsRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2310pplusSnmpViewsEntry 5 }
gs2310pplusSnmpAccess OBJECT IDENTIFIER ::= { gs2310pplusSnmp 7 }
gs2310pplusSnmpAccessCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2310pplusSnmpAccess 1 }
gs2310pplusSnmpAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSSnmpAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv3 Access entry."
::= { gs2310pplusSnmpAccess 2 }
gs2310pplusSnmpAccessEntry OBJECT-TYPE
SYNTAX GS2310PPLUSSnmpAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSnmpAccessIndex }
::= { gs2310pplusSnmpAccessTable 1 }
GS2310PPLUSSnmpAccessEntry ::= SEQUENCE {
gs2310pplusSnmpAccessIndex Integer32,
gs2310pplusSnmpAccessGroupName DisplayString,
gs2310pplusSnmpAccessSecurityModel INTEGER,
gs2310pplusSnmpAccessSecurityLevel INTEGER,
gs2310pplusSnmpAccessReadViewName DisplayString,
gs2310pplusSnmpAccessWriteViewName DisplayString,
gs2310pplusSnmpAccessRowStatus INTEGER
}
gs2310pplusSnmpAccessIndex OBJECT-TYPE
SYNTAX Integer32(1..14)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSnmpAccessEntry 1 }
gs2310pplusSnmpAccessGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Group Name."
::= { gs2310pplusSnmpAccessEntry 2 }
gs2310pplusSnmpAccessSecurityModel OBJECT-TYPE
SYNTAX INTEGER { any(0), v1(1), v2c(2), usm(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: any.
1: v1.
2: v2c.
3: usm."
::= { gs2310pplusSnmpAccessEntry 3 }
gs2310pplusSnmpAccessSecurityLevel OBJECT-TYPE
SYNTAX INTEGER { noauthnopriv(1), authnopriv(2), authpriv(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: No authentication and no privacy.
2: Authentication and no privacy.
3: Authentication and privacy. "
::= { gs2310pplusSnmpAccessEntry 4 }
gs2310pplusSnmpAccessReadViewName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Read View Name.
None is reserved for Empty."
::= { gs2310pplusSnmpAccessEntry 5 }
gs2310pplusSnmpAccessWriteViewName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Write View Name.
None is reserved for Empty."
::= { gs2310pplusSnmpAccessEntry 6 }
gs2310pplusSnmpAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2310pplusSnmpAccessEntry 7 }
----------------------------------------------------------------------------------------------------
gs2310pplusConfiguration OBJECT IDENTIFIER ::= { lancomGS2310PPLUS 2 }
gs2310pplusPort OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 1 }
gs2310pplusPortConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show port configurations. "
::= { gs2310pplusPort 1 }
gs2310pplusPortConfigurationEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPortConfPort }
::= { gs2310pplusPortConfigurationTable 1 }
GS2310PPLUSPortConfigurationEntry ::= SEQUENCE {
gs2310pplusPortConfPort Integer32,
gs2310pplusPortConfPortMedia DisplayString,
gs2310pplusPortConfLink DisplayString,
gs2310pplusPortConfCurrentSpeed DisplayString,
gs2310pplusPortConfSpeed INTEGER,
gs2310pplusPortConfCurrentFlowControlRx INTEGER,
gs2310pplusPortConfCurrentFlowControlTx INTEGER,
gs2310pplusPortConfFlowControl INTEGER,
gs2310pplusPortConfMaxFrameSize Integer32,
gs2310pplusPortConfExcessiveCollisionMode INTEGER,
gs2310pplusPortConfPowerControl INTEGER,
gs2310pplusPortConfDescription DisplayString
}
gs2310pplusPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusPortConfigurationEntry 1 }
gs2310pplusPortConfPortMedia OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Show port media. "
::= { gs2310pplusPortConfigurationEntry 2 }
gs2310pplusPortConfLink OBJECT-TYPE
SYNTAX DisplayString(SIZE (2..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current link state. "
::= { gs2310pplusPortConfigurationEntry 3 }
gs2310pplusPortConfCurrentSpeed OBJECT-TYPE
SYNTAX DisplayString(SIZE (6..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current link speed of the port. "
::= { gs2310pplusPortConfigurationEntry 4 }
gs2310pplusPortConfSpeed OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
auto(1),
speed10Half(2),
speed10Full(3),
speed100Half(4),
speed100Full(5),
speed1Gfull(6),
sfpAutoAMS(7),
speed100FXAMS(8),
speed1000XAMS(9),
speed100FX(10),
speed1000X(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1,
0: disable state,
1: auto,
2: 10 Half,
3: 10 Full,
4: 100 Half,
5: 100 Full,
6: 1G full,
only 'Dual Media' port have 7-11 option.
Dual Media port default: 7,
7: SFP_Auto_AMS,
8: 100FX_AMS,
9: 1000X_AMS,
10: 100FX,
11: 1000X "
::= { gs2310pplusPortConfigurationEntry 5 }
gs2310pplusPortConfCurrentFlowControlRx OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), noSupport(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: disable
1: enable
2: no support. "
::= { gs2310pplusPortConfigurationEntry 6 }
gs2310pplusPortConfCurrentFlowControlTx OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), noSupport(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: disable
1: enable
2: no support. "
::= { gs2310pplusPortConfigurationEntry 7 }
gs2310pplusPortConfFlowControl OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), noSupport(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable
1: enable
2: no support. "
::= { gs2310pplusPortConfigurationEntry 8 }
gs2310pplusPortConfMaxFrameSize OBJECT-TYPE
SYNTAX Integer32 (1518..9600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 9600 , range : 1518 - 9600 "
::= { gs2310pplusPortConfigurationEntry 9 }
gs2310pplusPortConfExcessiveCollisionMode OBJECT-TYPE
SYNTAX INTEGER { discard(0), restart(1), noSupport(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
Excessive Collision Mode :
0: Discard,
1: Restart,
2: no support.
"
::= { gs2310pplusPortConfigurationEntry 10 }
gs2310pplusPortConfPowerControl OBJECT-TYPE
SYNTAX INTEGER { disable(0), actiphy(1), dynamic(2), enable(3), noSupport(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
PowerControl :
0: disable,
1: Actiphy,
2: Dynamic (perfectReach),
3: Enable,
4: no support.
"
::= { gs2310pplusPortConfigurationEntry 11 }
gs2310pplusPortConfDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Interface specific description.
Up to 47 characters describing this interface. "
::= { gs2310pplusPortConfigurationEntry 12 }
gs2310pplusPortTrafficStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPortTrafficStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPort 2 }
gs2310pplusPortTrafficStatisticsEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPortTrafficStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPortTrafficStatisticsPort }
::= { gs2310pplusPortTrafficStatisticsTable 1 }
GS2310PPLUSPortTrafficStatisticsEntry ::= SEQUENCE {
gs2310pplusPortTrafficStatisticsPort Integer32,
gs2310pplusPortTrafficStatisticsClear INTEGER,
gs2310pplusPortTrafficRxPackets Counter64,
gs2310pplusPortTrafficRxOctets Counter64,
gs2310pplusPortTrafficRxUnicast Counter64,
gs2310pplusPortTrafficRxMulticast Counter64,
gs2310pplusPortTrafficRxBroadcast Counter64,
gs2310pplusPortTrafficRxPause Counter64,
gs2310pplusPortTrafficRx64Bytes Counter64,
gs2310pplusPortTrafficRx65to127Bytes Counter64,
gs2310pplusPortTrafficRx128to255Bytes Counter64,
gs2310pplusPortTrafficRx256to511Bytes Counter64,
gs2310pplusPortTrafficRx512to1023Bytes Counter64,
gs2310pplusPortTrafficRx1024to1526Bytes Counter64,
gs2310pplusPortTrafficRxExceecd1527Bytes Counter64,
gs2310pplusPortTrafficRxQ0 Counter64,
gs2310pplusPortTrafficRxQ1 Counter64,
gs2310pplusPortTrafficRxQ2 Counter64,
gs2310pplusPortTrafficRxQ3 Counter64,
gs2310pplusPortTrafficRxQ4 Counter64,
gs2310pplusPortTrafficRxQ5 Counter64,
gs2310pplusPortTrafficRxQ6 Counter64,
gs2310pplusPortTrafficRxQ7 Counter64,
gs2310pplusPortTrafficRxDrops Counter64,
gs2310pplusPortTrafficRxCRCorAlignment Counter64,
gs2310pplusPortTrafficRxUndersize Counter64,
gs2310pplusPortTrafficRxOversize Counter64,
gs2310pplusPortTrafficRxFragments Counter64,
gs2310pplusPortTrafficRxJabber Counter64,
gs2310pplusPortTrafficRxFiltered Counter64,
gs2310pplusPortTrafficTxPackets Counter64,
gs2310pplusPortTrafficTxOctets Counter64,
gs2310pplusPortTrafficTxUnicast Counter64,
gs2310pplusPortTrafficTxMulticast Counter64,
gs2310pplusPortTrafficTxBroadcast Counter64,
gs2310pplusPortTrafficTxPause Counter64,
gs2310pplusPortTrafficTx64Bytes Counter64,
gs2310pplusPortTrafficTx65to127Bytes Counter64,
gs2310pplusPortTrafficTx128to255Bytes Counter64,
gs2310pplusPortTrafficTx256to511Bytes Counter64,
gs2310pplusPortTrafficTx512to1023Bytes Counter64,
gs2310pplusPortTrafficTx1024to1526Bytes Counter64,
gs2310pplusPortTrafficTxExceecd1527Bytes Counter64,
gs2310pplusPortTrafficTxQ0 Counter64,
gs2310pplusPortTrafficTxQ1 Counter64,
gs2310pplusPortTrafficTxQ2 Counter64,
gs2310pplusPortTrafficTxQ3 Counter64,
gs2310pplusPortTrafficTxQ4 Counter64,
gs2310pplusPortTrafficTxQ5 Counter64,
gs2310pplusPortTrafficTxQ6 Counter64,
gs2310pplusPortTrafficTxQ7 Counter64,
gs2310pplusPortTrafficTxDrops Counter64,
gs2310pplusPortTrafficTxLateOrExcColl Counter64
}
gs2310pplusPortTrafficStatisticsPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 1 }
gs2310pplusPortTrafficStatisticsClear OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 2 }
gs2310pplusPortTrafficRxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 3 }
gs2310pplusPortTrafficRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 4 }
gs2310pplusPortTrafficRxUnicast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 5 }
gs2310pplusPortTrafficRxMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 6 }
gs2310pplusPortTrafficRxBroadcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 7 }
gs2310pplusPortTrafficRxPause OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 8 }
gs2310pplusPortTrafficRx64Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 9 }
gs2310pplusPortTrafficRx65to127Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 10 }
gs2310pplusPortTrafficRx128to255Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 11 }
gs2310pplusPortTrafficRx256to511Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 12 }
gs2310pplusPortTrafficRx512to1023Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 13 }
gs2310pplusPortTrafficRx1024to1526Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 14 }
gs2310pplusPortTrafficRxExceecd1527Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 15 }
gs2310pplusPortTrafficRxQ0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 16 }
gs2310pplusPortTrafficRxQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 17 }
gs2310pplusPortTrafficRxQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 18 }
gs2310pplusPortTrafficRxQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 19 }
gs2310pplusPortTrafficRxQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 20 }
gs2310pplusPortTrafficRxQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 21 }
gs2310pplusPortTrafficRxQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 22 }
gs2310pplusPortTrafficRxQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 23 }
gs2310pplusPortTrafficRxDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 24 }
gs2310pplusPortTrafficRxCRCorAlignment OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 25 }
gs2310pplusPortTrafficRxUndersize OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 26 }
gs2310pplusPortTrafficRxOversize OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 27 }
gs2310pplusPortTrafficRxFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 28 }
gs2310pplusPortTrafficRxJabber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 29 }
gs2310pplusPortTrafficRxFiltered OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 30 }
gs2310pplusPortTrafficTxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 31 }
gs2310pplusPortTrafficTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 32 }
gs2310pplusPortTrafficTxUnicast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 33 }
gs2310pplusPortTrafficTxMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 34 }
gs2310pplusPortTrafficTxBroadcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 35 }
gs2310pplusPortTrafficTxPause OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 36 }
gs2310pplusPortTrafficTx64Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 37 }
gs2310pplusPortTrafficTx65to127Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 38 }
gs2310pplusPortTrafficTx128to255Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 39 }
gs2310pplusPortTrafficTx256to511Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 40 }
gs2310pplusPortTrafficTx512to1023Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 41 }
gs2310pplusPortTrafficTx1024to1526Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 42 }
gs2310pplusPortTrafficTxExceecd1527Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 43 }
gs2310pplusPortTrafficTxQ0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 44 }
gs2310pplusPortTrafficTxQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 45 }
gs2310pplusPortTrafficTxQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 46 }
gs2310pplusPortTrafficTxQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 47 }
gs2310pplusPortTrafficTxQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 48 }
gs2310pplusPortTrafficTxQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 49 }
gs2310pplusPortTrafficTxQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 50 }
gs2310pplusPortTrafficTxQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 51 }
gs2310pplusPortTrafficTxDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 52 }
gs2310pplusPortTrafficTxLateOrExcColl OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortTrafficStatisticsEntry 53 }
gs2310pplusPortQoSStatistics OBJECT IDENTIFIER ::= { gs2310pplusPort 3 }
gs2310pplusPortQoSStatisticsClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"default: 0
0: none
1: clear "
::= { gs2310pplusPortQoSStatistics 1 }
gs2310pplusPortQoSStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPortQoSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatistics 2 }
gs2310pplusPortQoSStatisticsEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPortQoSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPortQoSStatisticsPort }
::= { gs2310pplusPortQoSStatisticsTable 1 }
GS2310PPLUSPortQoSStatisticsEntry ::= SEQUENCE {
gs2310pplusPortQoSStatisticsPort Integer32,
gs2310pplusPortQoSQ0Rx Counter64,
gs2310pplusPortQoSQ0Tx Counter64,
gs2310pplusPortQoSQ1Rx Counter64,
gs2310pplusPortQoSQ1Tx Counter64,
gs2310pplusPortQoSQ2Rx Counter64,
gs2310pplusPortQoSQ2Tx Counter64,
gs2310pplusPortQoSQ3Rx Counter64,
gs2310pplusPortQoSQ3Tx Counter64,
gs2310pplusPortQoSQ4Rx Counter64,
gs2310pplusPortQoSQ4Tx Counter64,
gs2310pplusPortQoSQ5Rx Counter64,
gs2310pplusPortQoSQ5Tx Counter64,
gs2310pplusPortQoSQ6Rx Counter64,
gs2310pplusPortQoSQ6Tx Counter64,
gs2310pplusPortQoSQ7Rx Counter64,
gs2310pplusPortQoSQ7Tx Counter64
}
gs2310pplusPortQoSStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 1 }
gs2310pplusPortQoSQ0Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 2 }
gs2310pplusPortQoSQ0Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 3 }
gs2310pplusPortQoSQ1Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 4 }
gs2310pplusPortQoSQ1Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 5 }
gs2310pplusPortQoSQ2Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 6 }
gs2310pplusPortQoSQ2Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 7 }
gs2310pplusPortQoSQ3Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 8 }
gs2310pplusPortQoSQ3Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 9 }
gs2310pplusPortQoSQ4Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 10 }
gs2310pplusPortQoSQ4Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 11 }
gs2310pplusPortQoSQ5Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 12 }
gs2310pplusPortQoSQ5Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 13 }
gs2310pplusPortQoSQ6Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 14 }
gs2310pplusPortQoSQ6Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 15 }
gs2310pplusPortQoSQ7Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 16 }
gs2310pplusPortQoSQ7Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortQoSStatisticsEntry 17 }
gs2310pplusSFPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSSFPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPort 4 }
gs2310pplusSFPInfoEntry OBJECT-TYPE
SYNTAX GS2310PPLUSSFPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSFPInfoIndex }
::= { gs2310pplusSFPInfoTable 1 }
GS2310PPLUSSFPInfoEntry ::= SEQUENCE {
gs2310pplusSFPInfoIndex Integer32,
gs2310pplusSFPInfoPort DisplayString,
gs2310pplusSFPConnectorType DisplayString,
gs2310pplusSFPFiberType DisplayString,
gs2310pplusSFPTxCentralWavelength DisplayString,
gs2310pplusSFPBaudRate DisplayString,
gs2310pplusSFPVendorOUI DisplayString,
gs2310pplusSFPVendorName DisplayString,
gs2310pplusSFPVendorPN DisplayString,
gs2310pplusSFPVendorRev DisplayString,
gs2310pplusSFPVendorSN DisplayString,
gs2310pplusSFPDateCode DisplayString,
gs2310pplusSFPTemperature DisplayString,
gs2310pplusSFPVcc DisplayString,
gs2310pplusSFPMon1Bias DisplayString,
gs2310pplusSFPMon2TxPWR DisplayString,
gs2310pplusSFPMon3RxPWR DisplayString
}
gs2310pplusSFPInfoIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 1 }
gs2310pplusSFPInfoPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 2 }
gs2310pplusSFPConnectorType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 3 }
gs2310pplusSFPFiberType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 4 }
gs2310pplusSFPTxCentralWavelength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 5 }
gs2310pplusSFPBaudRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 6 }
gs2310pplusSFPVendorOUI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 7 }
gs2310pplusSFPVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 8 }
gs2310pplusSFPVendorPN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 9 }
gs2310pplusSFPVendorRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 10 }
gs2310pplusSFPVendorSN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 11 }
gs2310pplusSFPDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 12 }
gs2310pplusSFPTemperature OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 13 }
gs2310pplusSFPVcc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 14 }
gs2310pplusSFPMon1Bias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 15 }
gs2310pplusSFPMon2TxPWR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 16 }
gs2310pplusSFPMon3RxPWR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusSFPInfoEntry 17 }
gs2310pplusPortEEETable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPortEEEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPort 5 }
gs2310pplusPortEEEEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPortEEEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPortEEEPort }
::= { gs2310pplusPortEEETable 1 }
GS2310PPLUSPortEEEEntry ::= SEQUENCE {
gs2310pplusPortEEEPort Integer32,
gs2310pplusPortEEEMode INTEGER,
gs2310pplusPortEEEUrgentQueue1 INTEGER,
gs2310pplusPortEEEUrgentQueue2 INTEGER,
gs2310pplusPortEEEUrgentQueue3 INTEGER,
gs2310pplusPortEEEUrgentQueue4 INTEGER,
gs2310pplusPortEEEUrgentQueue5 INTEGER,
gs2310pplusPortEEEUrgentQueue6 INTEGER,
gs2310pplusPortEEEUrgentQueue7 INTEGER,
gs2310pplusPortEEEUrgentQueue8 INTEGER
}
gs2310pplusPortEEEPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortEEEEntry 1 }
gs2310pplusPortEEEMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusPortEEEEntry 2 }
gs2310pplusPortEEEUrgentQueue1 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusPortEEEEntry 3 }
gs2310pplusPortEEEUrgentQueue2 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusPortEEEEntry 4 }
gs2310pplusPortEEEUrgentQueue3 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusPortEEEEntry 5 }
gs2310pplusPortEEEUrgentQueue4 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusPortEEEEntry 6 }
gs2310pplusPortEEEUrgentQueue5 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusPortEEEEntry 7 }
gs2310pplusPortEEEUrgentQueue6 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusPortEEEEntry 8 }
gs2310pplusPortEEEUrgentQueue7 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusPortEEEEntry 9 }
gs2310pplusPortEEEUrgentQueue8 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusPortEEEEntry 10 }
gs2310pplusVoiceVLAN OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 2 }
gs2310pplusVoiceVLANConf OBJECT IDENTIFIER ::= { gs2310pplusVoiceVLAN 1 }
gs2310pplusVoiceVLANMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN mode operation.
default: 0,
0: disable
1: enable"
::= { gs2310pplusVoiceVLANConf 1 }
gs2310pplusVoiceVLANVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Voice VLAN ID.
default: 1000,
range : 1-4094. "
::= { gs2310pplusVoiceVLANConf 2 }
gs2310pplusVoiceVLANAgingTime OBJECT-TYPE
SYNTAX Integer32(10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN secure learning aging time.
default: 86400,
range : 10 - 10000000. "
::= { gs2310pplusVoiceVLANConf 3 }
gs2310pplusVoiceVLANTrafficClass OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN traffic class, all traffic on the Voice VLAN
will apply this class, available value is from 0(Low)
to 7(High).
default: 7. "
::= { gs2310pplusVoiceVLANConf 4 }
gs2310pplusVoiceVLANPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSVoiceVLANPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Voice Vlan configuration. "
::= { gs2310pplusVoiceVLANConf 5 }
gs2310pplusVoiceVLANPortEntry OBJECT-TYPE
SYNTAX GS2310PPLUSVoiceVLANPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusVoiceVLANPort }
::= { gs2310pplusVoiceVLANPortTable 1 }
GS2310PPLUSVoiceVLANPortEntry ::= SEQUENCE {
gs2310pplusVoiceVLANPort Integer32,
gs2310pplusVoiceVLANPortMode INTEGER,
gs2310pplusVoiceVLANPortSecurity INTEGER,
gs2310pplusVoiceVLANPortDiscoveryProtocol INTEGER
}
gs2310pplusVoiceVLANPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusVoiceVLANPortEntry 1 }
gs2310pplusVoiceVLANPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), auto(1), forced(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN port mode.
default: 0,
0: Disable (Disjoin from Voice VLAN.)
1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members automatically.)
2: Forced (Force join to Voice VLAN.)"
::= { gs2310pplusVoiceVLANPortEntry 2 }
gs2310pplusVoiceVLANPortSecurity OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN port security mode.
default: 0,
0: Disable (Disjoin from Voice VLAN.)
1: enable ( Enable Voice VLAN security mode. When the function is
enabled, all non-telephone MAC address in Voice VLAN
will be blocked 10 seconds.)"
::= { gs2310pplusVoiceVLANPortEntry 3 }
gs2310pplusVoiceVLANPortDiscoveryProtocol OBJECT-TYPE
SYNTAX INTEGER { oui(0), lldp(1), both(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN port discovery protocol.
default: 0
0: OUI (Detect telephony device by OUI address.)
1: LLDP (Detect telephony device by LLDP.)
2: Both (Both OUI and LLDP.) "
::= { gs2310pplusVoiceVLANPortEntry 4 }
gs2310pplusVoiceVLANSkipNAS OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN skip NAS mode.
default: 0,
0: Disable (Do not skip NAS on Voice VLAN.)
1: enable (Enable skipping of NAS on Voice VLAN. When the function is
enabled, authentication through the NAS module is not
applied to the Voice VLAN, but clients are allowed without
authentication.)"
::= { gs2310pplusVoiceVLANPortEntry 5 }
gs2310pplusVoiceVLANOUI OBJECT IDENTIFIER ::= { gs2310pplusVoiceVLAN 2 }
gs2310pplusVoiceVLANOUICreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create an OUI entry"
::= { gs2310pplusVoiceVLANOUI 1 }
gs2310pplusVoiceVLANOUITable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSVoiceVLANOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create Voice VLAN OUI entry. Modify OUI table will
restart auto detect OUI process. "
::= { gs2310pplusVoiceVLANOUI 2 }
gs2310pplusVoiceVLANOUIEntry OBJECT-TYPE
SYNTAX GS2310PPLUSVoiceVLANOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusVoiceVLANOUIIndex }
::= { gs2310pplusVoiceVLANOUITable 1 }
GS2310PPLUSVoiceVLANOUIEntry ::= SEQUENCE {
gs2310pplusVoiceVLANOUIIndex Integer32,
gs2310pplusVoiceVLANTelephonyOUI OCTET STRING,
gs2310pplusVoiceVLANDescription DisplayString,
gs2310pplusVoiceVLANOUIRowStatus INTEGER
}
gs2310pplusVoiceVLANOUIIndex OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusVoiceVLANOUIEntry 1 }
gs2310pplusVoiceVLANTelephonyOUI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OUI address, format : 0a 1b 2c "
::= { gs2310pplusVoiceVLANOUIEntry 2 }
gs2310pplusVoiceVLANDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 32 characters describing OUI address. "
::= { gs2310pplusVoiceVLANOUIEntry 3 }
gs2310pplusVoiceVLANOUIRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2310pplusVoiceVLANOUIEntry 4 }
gs2310pplusGARP OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 3 }
gs2310pplusGARPConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSGARPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusGARP 1 }
gs2310pplusGARPConfEntry OBJECT-TYPE
SYNTAX GS2310PPLUSGARPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusGARPConfPort }
::= { gs2310pplusGARPConfTable 1 }
GS2310PPLUSGARPConfEntry ::= SEQUENCE {
gs2310pplusGARPConfPort Integer32,
gs2310pplusGARPJoinTimer Integer32,
gs2310pplusGARPLeaveTimer Integer32,
gs2310pplusGARPLeaveAllTimer Integer32,
gs2310pplusGARPApplicantion INTEGER,
gs2310pplusGARPAttributeType INTEGER,
gs2310pplusGARPApplicant INTEGER
}
gs2310pplusGARPConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusGARPConfEntry 1 }
gs2310pplusGARPJoinTimer OBJECT-TYPE
SYNTAX Integer32(200..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 200, range : 200 - 1000 "
::= { gs2310pplusGARPConfEntry 2 }
gs2310pplusGARPLeaveTimer OBJECT-TYPE
SYNTAX Integer32(600..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 600 , range : 600 - 3000"
::= { gs2310pplusGARPConfEntry 3 }
gs2310pplusGARPLeaveAllTimer OBJECT-TYPE
SYNTAX Integer32(10000..50000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 10000, range : 10000 - 50000 "
::= { gs2310pplusGARPConfEntry 4 }
gs2310pplusGARPApplicantion OBJECT-TYPE
SYNTAX INTEGER { gvrp(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
1: GVRP"
::= { gs2310pplusGARPConfEntry 5 }
gs2310pplusGARPAttributeType OBJECT-TYPE
SYNTAX INTEGER { vlan(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
1: VLAN"
::= { gs2310pplusGARPConfEntry 6 }
gs2310pplusGARPApplicant OBJECT-TYPE
SYNTAX INTEGER { participant(0), nonParticipant(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: normal-participant
1: non-participant"
::= { gs2310pplusGARPConfEntry 7 }
gs2310pplusGARPStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSGARPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show the basic GARP port statistics. "
::= { gs2310pplusGARP 2 }
gs2310pplusGARPStatisticsEntry OBJECT-TYPE
SYNTAX GS2310PPLUSGARPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusGARPStatisticsPort }
::= { gs2310pplusGARPStatisticsTable 1 }
GS2310PPLUSGARPStatisticsEntry ::= SEQUENCE {
gs2310pplusGARPStatisticsPort Integer32,
gs2310pplusGARPStatisticsPeerMAC DisplayString,
gs2310pplusGARPStatisticsFailedCount Counter32
}
gs2310pplusGARPStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusGARPStatisticsEntry 1 }
gs2310pplusGARPStatisticsPeerMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Peer MAC is MAC address of the neighbour Switch from with GARP frame is received. "
::= { gs2310pplusGARPStatisticsEntry 2 }
gs2310pplusGARPStatisticsFailedCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" explain Failed count here. "
::= { gs2310pplusGARPStatisticsEntry 3 }
gs2310pplusGVRP OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 4 }
gs2310pplusGVRPConf OBJECT IDENTIFIER ::= { gs2310pplusGVRP 1 }
gs2310pplusGVRPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable,
1: enable. "
::= { gs2310pplusGVRPConf 1 }
gs2310pplusGVRPConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSGVRPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusGVRPConf 2 }
gs2310pplusGVRPConfEntry OBJECT-TYPE
SYNTAX GS2310PPLUSGVRPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusGVRPConfPort }
::= { gs2310pplusGVRPConfTable 1 }
GS2310PPLUSGVRPConfEntry ::= SEQUENCE {
gs2310pplusGVRPConfPort Integer32,
gs2310pplusGVRPConfPortMode INTEGER,
gs2310pplusGVRPConfPortRRole INTEGER
}
gs2310pplusGVRPConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusGVRPConfEntry 1 }
gs2310pplusGVRPConfPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
1: enable
0: disable"
::= { gs2310pplusGVRPConfEntry 2 }
gs2310pplusGVRPConfPortRRole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
1: enable
0: disable"
::= { gs2310pplusGVRPConfEntry 3 }
gs2310pplusGVRPStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSGVRPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusGVRP 2 }
gs2310pplusGVRPStatisticsEntry OBJECT-TYPE
SYNTAX GS2310PPLUSGVRPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusGVRPStatisticsPort }
::= { gs2310pplusGVRPStatisticsTable 1 }
GS2310PPLUSGVRPStatisticsEntry ::= SEQUENCE {
gs2310pplusGVRPStatisticsPort Integer32,
gs2310pplusGVRPStatisticsJoinTxCnt Counter32,
gs2310pplusGVRPStatisticsLeaveTxCnt Counter32
}
gs2310pplusGVRPStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusGVRPStatisticsEntry 1 }
gs2310pplusGVRPStatisticsJoinTxCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusGVRPStatisticsEntry 2 }
gs2310pplusGVRPStatisticsLeaveTxCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusGVRPStatisticsEntry 3 }
gs2310pplusMirroring OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 6 }
gs2310pplusPortToMirrorOn OBJECT-TYPE
SYNTAX Integer32(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable,
range : 1 - port number. "
::= { gs2310pplusMirroring 1 }
gs2310pplusMirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusMirroring 2 }
gs2310pplusMirrorEntry OBJECT-TYPE
SYNTAX GS2310PPLUSMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMirrorPort }
::= { gs2310pplusMirrorTable 1 }
GS2310PPLUSMirrorEntry ::= SEQUENCE {
gs2310pplusMirrorPort Integer32,
gs2310pplusMirrorMode INTEGER
}
gs2310pplusMirrorPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusMirrorEntry 1 }
gs2310pplusMirrorMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), rxOnly(2), txOnly(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable
2: rx only
3: tx only
Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored"
::= { gs2310pplusMirrorEntry 2 }
gs2310pplusTrapEventSeverity OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 7 }
gs2310pplusTrapEventSeverityACL OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 1 }
gs2310pplusTrapEventSeverityACLLog OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 7(Debug)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 2 }
gs2310pplusTrapEventSeverityAccessMgmt OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 3 }
gs2310pplusTrapEventSeverityAuthFailed OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 4 }
gs2310pplusTrapEventSeverityColdStart OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 5 }
gs2310pplusTrapEventSeverityConfigInfo OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 6 }
gs2310pplusTrapEventSeverityFirmwareUpgrade OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 7 }
gs2310pplusTrapEventSeverityImportExport OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 8 }
gs2310pplusTrapEventSeverityLACP OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 9 }
gs2310pplusTrapEventSeverityLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 10 }
gs2310pplusTrapEventSeverityLogin OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 11 }
gs2310pplusTrapEventSeverityLogout OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 12 }
gs2310pplusTrapEventSeverityLoopProtect OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 13 }
gs2310pplusTrapEventSeverityMgmtIPChange OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 14 }
gs2310pplusTrapEventSeverityModuleChange OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 5(Notice)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 15 }
gs2310pplusTrapEventSeverityNAS OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 16 }
gs2310pplusTrapEventSeverityPasswordChange OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 17 }
gs2310pplusTrapEventSeverityPortSecurity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 18 }
gs2310pplusTrapEventSeverityVLAN OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 20 }
gs2310pplusTrapEventSeverityWarmStart OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 21 }
gs2310pplusTrapEventSeverityPoEAutoCheck OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 22 }
gs2310pplusTrapEventSeverityARPConflict OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 25 }
gs2310pplusTrapEventSeveritySpoofingLimit OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 27 }
gs2310pplusTrapEventSeverityStaticARPConflict OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusTrapEventSeverity 28 }
gs2310pplusSMTP OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 8 }
gs2310pplusSMTPMailServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing email server. "
::= { gs2310pplusSMTP 1 }
gs2310pplusSMTPUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing user name. "
::= { gs2310pplusSMTP 2 }
gs2310pplusSMTPPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing password. "
::= { gs2310pplusSMTP 3 }
gs2310pplusSMTPServeriryLevel OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 6
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2310pplusSMTP 4 }
gs2310pplusSMTPSender OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing sender. "
::= { gs2310pplusSMTP 5 }
gs2310pplusSMTPReturnPath OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing return path. "
::= { gs2310pplusSMTP 6 }
gs2310pplusSMTPEmailAddress1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2310pplusSMTP 7 }
gs2310pplusSMTPEmailAddress2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2310pplusSMTP 8 }
gs2310pplusSMTPEmailAddress3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2310pplusSMTP 9 }
gs2310pplusSMTPEmailAddress4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2310pplusSMTP 10 }
gs2310pplusSMTPEmailAddress5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2310pplusSMTP 11 }
gs2310pplusSMTPEmailAddress6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2310pplusSMTP 12 }
gs2310pplusACL OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 9 }
gs2310pplusACLPortsConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSACLPortsConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusACL 1 }
gs2310pplusACLPortsConfEntry OBJECT-TYPE
SYNTAX GS2310PPLUSACLPortsConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusACLPortsConfPort }
::= { gs2310pplusACLPortsConfTable 1 }
GS2310PPLUSACLPortsConfEntry ::= SEQUENCE {
gs2310pplusACLPortsConfPort Integer32,
gs2310pplusACLPortsConfPolicyID Integer32,
gs2310pplusACLPortsConfAction INTEGER,
gs2310pplusACLPortsConfRateLimiterID Integer32,
gs2310pplusACLPortsConfPortRedirect Integer32,
gs2310pplusACLPortsConfMirror INTEGER,
gs2310pplusACLPortsConfLogging INTEGER,
gs2310pplusACLPortsConfShutdown INTEGER,
gs2310pplusACLPortsConfState INTEGER,
gs2310pplusACLPortsConfCounter Counter32
}
gs2310pplusACLPortsConfPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusACLPortsConfEntry 1 }
gs2310pplusACLPortsConfPolicyID OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0, range : 0 - 255 "
::= { gs2310pplusACLPortsConfEntry 2 }
gs2310pplusACLPortsConfAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1,
0: Deny
1: Permit"
::= { gs2310pplusACLPortsConfEntry 3 }
gs2310pplusACLPortsConfRateLimiterID OBJECT-TYPE
SYNTAX Integer32 (0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: Disable
range : 0 - 12 "
::= { gs2310pplusACLPortsConfEntry 4 }
gs2310pplusACLPortsConfPortRedirect OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: Disable
range : 0 - end port number "
::= { gs2310pplusACLPortsConfEntry 5 }
gs2310pplusACLPortsConfMirror OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: Disable
1: Enable "
::= { gs2310pplusACLPortsConfEntry 6 }
gs2310pplusACLPortsConfLogging OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: Disable
1: Enable "
::= { gs2310pplusACLPortsConfEntry 7 }
gs2310pplusACLPortsConfShutdown OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: Disable
1: Enable "
::= { gs2310pplusACLPortsConfEntry 8 }
gs2310pplusACLPortsConfState OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: Disable
1: Enable "
::= { gs2310pplusACLPortsConfEntry 9 }
gs2310pplusACLPortsConfCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of frames that match this ACE. "
::= { gs2310pplusACLPortsConfEntry 10 }
gs2310pplusACLRateLimiterTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSACLRateLimiterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusACL 2 }
gs2310pplusACLRateLimiterEntry OBJECT-TYPE
SYNTAX GS2310PPLUSACLRateLimiterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusACLRateLimiterID }
::= { gs2310pplusACLRateLimiterTable 1 }
GS2310PPLUSACLRateLimiterEntry ::= SEQUENCE {
gs2310pplusACLRateLimiterID Integer32,
gs2310pplusACLRateLimiterUnit INTEGER,
gs2310pplusACLRateLimiterRate Integer32
}
gs2310pplusACLRateLimiterID OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Rate Limiter ID.
range : 1-12 "
::= { gs2310pplusACLRateLimiterEntry 1 }
gs2310pplusACLRateLimiterUnit OBJECT-TYPE
SYNTAX INTEGER { pps(0), kbps(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: pps
1: kbps"
::= { gs2310pplusACLRateLimiterEntry 2 }
gs2310pplusACLRateLimiterRate OBJECT-TYPE
SYNTAX Integer32(0..3276700)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1,
range : <0-3276700> pps
<0-10000> kbps"
::= { gs2310pplusACLRateLimiterEntry 3 }
gs2310pplusACLACE OBJECT IDENTIFIER ::= { gs2310pplusACL 3 }
gs2310pplusACLACECreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create an ACE entry"
::= { gs2310pplusACLACE 1 }
gs2310pplusACLACETable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSACLACEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create ACL ACE entry. "
::= { gs2310pplusACLACE 2 }
gs2310pplusACLACEEntry OBJECT-TYPE
SYNTAX GS2310PPLUSACLACEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusACLACEIndex }
::= { gs2310pplusACLACETable 1 }
GS2310PPLUSACLACEEntry ::= SEQUENCE {
gs2310pplusACLACEIndex Integer32,
gs2310pplusACLACEID Integer32,
gs2310pplusACLACENextID Integer32,
gs2310pplusACLACEIngressPort DisplayString,
gs2310pplusACLACEPortPolicyNumber Integer32,
gs2310pplusACLACEPortPolicyBitmask Integer32,
gs2310pplusACLACEFrameType INTEGER,
gs2310pplusACLACEAction INTEGER,
gs2310pplusACLACEDenyPortRedirect DisplayString,
gs2310pplusACLACELogging INTEGER,
gs2310pplusACLACEMirror INTEGER,
gs2310pplusACLACERateLimiter Integer32,
gs2310pplusACLACEShutdown INTEGER,
gs2310pplusACLACEVLAN8021QTagged INTEGER,
gs2310pplusACLACEVLANTagPriority Integer32,
gs2310pplusACLACEVLANVID Integer32,
gs2310pplusACLACEEtherType Integer32,
gs2310pplusACLACESMAC DisplayString,
gs2310pplusACLACEDMACType INTEGER,
gs2310pplusACLACEDMAC DisplayString,
gs2310pplusACLACEArpOpcode INTEGER,
gs2310pplusACLACEArpFlagsRequestReply INTEGER,
gs2310pplusACLACEArpFlagsArpSmac INTEGER,
gs2310pplusACLACEArpFlagsRarpDmac INTEGER,
gs2310pplusACLACEArpFlagsLength INTEGER,
gs2310pplusACLACEArpFlagsIp INTEGER,
gs2310pplusACLACEArpFlagsEthernet INTEGER,
gs2310pplusACLACESIPType INTEGER,
gs2310pplusACLACESIPIPAddress IpAddress,
gs2310pplusACLACESIPNetworkPrefix Integer32,
gs2310pplusACLACEDIPType INTEGER,
gs2310pplusACLACEDIPIPAddress IpAddress,
gs2310pplusACLACEDIPNetworkPrefix Integer32,
gs2310pplusACLACEIPProtocol Integer32,
gs2310pplusACLACEIPFlagsTTL INTEGER,
gs2310pplusACLACEIPFlagsOptions INTEGER,
gs2310pplusACLACEIPFlagsFragment INTEGER,
gs2310pplusACLACEICMPType Integer32,
gs2310pplusACLACEICMPCode Integer32,
gs2310pplusACLACESourcePortMin Integer32,
gs2310pplusACLACESourcePortMax Integer32,
gs2310pplusACLACEDestPortMin Integer32,
gs2310pplusACLACEDestPortMax Integer32,
gs2310pplusACLACETCPFlagsFin INTEGER,
gs2310pplusACLACETCPFlagsSyn INTEGER,
gs2310pplusACLACETCPFlagsRst INTEGER,
gs2310pplusACLACETCPFlagsPsh INTEGER,
gs2310pplusACLACETCPFlagsAck INTEGER,
gs2310pplusACLACETCPFlagsUrg INTEGER,
gs2310pplusACLACERowStatus INTEGER
}
gs2310pplusACLACEIndex OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusACLACEEntry 1 }
gs2310pplusACLACEID OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256. "
::= { gs2310pplusACLACEEntry 2 }
gs2310pplusACLACENextID OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256. "
::= { gs2310pplusACLACEEntry 3 }
gs2310pplusACLACEIngressPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6."
::= { gs2310pplusACLACEEntry 4 }
gs2310pplusACLACEPortPolicyNumber OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" policy value.
range : 0 - 255. "
::= { gs2310pplusACLACEEntry 5 }
gs2310pplusACLACEPortPolicyBitmask OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" policy bitmask.
range : 0 - 255(0xff). "
::= { gs2310pplusACLACEEntry 6 }
gs2310pplusACLACEFrameType OBJECT-TYPE
SYNTAX INTEGER {
any(0),
arp(1),
etype(2),
icmp(3),
ipv4(4),
tcp(5),
udp(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp."
::= { gs2310pplusACLACEEntry 7 }
gs2310pplusACLACEAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1,
0: Deny
1: Permit"
::= { gs2310pplusACLACEEntry 8 }
gs2310pplusACLACEDenyPortRedirect OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6."
::= { gs2310pplusACLACEEntry 9 }
gs2310pplusACLACELogging OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log."
::= { gs2310pplusACLACEEntry 10 }
gs2310pplusACLACEMirror OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable - Frames matching the ACE are not mirrored.
1: enable - Frames matching the ACE are mirrored."
::= { gs2310pplusACLACEEntry 11 }
gs2310pplusACLACERateLimiter OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: Disable
range : 0 - 12 "
::= { gs2310pplusACLACEEntry 12 }
gs2310pplusACLACEShutdown OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled."
::= { gs2310pplusACLACEEntry 13 }
gs2310pplusACLACEVLAN8021QTagged OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), any(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to the 802.1Q tagged.
default: 2,
0: disable - Untagged frame only.
1: enable - Tagged frame only.
2: Any - Any value is allowed. "
::= { gs2310pplusACLACEEntry 14 }
gs2310pplusACLACEVLANTagPriority OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8 "
::= { gs2310pplusACLACEEntry 15 }
gs2310pplusACLACEVLANVID OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094 "
::= { gs2310pplusACLACEEntry 16 }
gs2310pplusACLACEEtherType OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff). "
::= { gs2310pplusACLACEEntry 17 }
gs2310pplusACLACESMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care."
::= { gs2310pplusACLACEEntry 18 }
gs2310pplusACLACEDMACType OBJECT-TYPE
SYNTAX INTEGER { any(0), broadcast(1), unicast(2), multicast(3) , macAddress(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address.
range : 0 - 4 "
::= { gs2310pplusACLACEEntry 19 }
gs2310pplusACLACEDMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Frame must be broadcast.
Unicast: Frame must be unicast.
Multicast: Frame must be multicast. "
::= { gs2310pplusACLACEEntry 20 }
gs2310pplusACLACEArpOpcode OBJECT-TYPE
SYNTAX INTEGER { any(0), arp(1), rarp(2), other(3), noData(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 4 "
::= { gs2310pplusACLACEEntry 21 }
gs2310pplusACLACEArpFlagsRequestReply OBJECT-TYPE
SYNTAX INTEGER { reply(0), request(1), any(2), noData(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP flag set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 22 }
gs2310pplusACLACEArpFlagsArpSmac OBJECT-TYPE
SYNTAX INTEGER { notEqualSMAC(0), equalSMAC(1), any(2), noData(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 23 }
gs2310pplusACLACEArpFlagsRarpDmac OBJECT-TYPE
SYNTAX INTEGER { notEqualDMAC(0), equalDMAC(1), any(2), noData(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1: RARP frames where THA is equal to the DMAC address.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 24 }
gs2310pplusACLACEArpFlagsLength OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04).
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4(0x04).
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 25 }
gs2310pplusACLACEArpFlagsIp OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(1).
1: ARP/RARP frames where the HLD is equal to Ethernet(1).
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 26 }
gs2310pplusACLACEArpFlagsEthernet OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x800).
1: ARP/RARP frames where the PRO is equal to IP(0x800).
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 27 }
gs2310pplusACLACESIPType OBJECT-TYPE
SYNTAX INTEGER { any(0), ip(1), noData(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1"
::= { gs2310pplusACLACEEntry 28 }
gs2310pplusACLACESIPIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A frame that hits this ACE matches this source IP address value."
::= { gs2310pplusACLACEEntry 29 }
gs2310pplusACLACESIPNetworkPrefix OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network prefix.
default: 32,
0: No data.
range : 1 - 32"
::= { gs2310pplusACLACEEntry 30 }
gs2310pplusACLACEDIPType OBJECT-TYPE
SYNTAX INTEGER { any(0), ip(1),noData(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1"
::= { gs2310pplusACLACEEntry 32 }
gs2310pplusACLACEDIPIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A frame that hits this ACE matches this destination IP address value."
::= { gs2310pplusACLACEEntry 33 }
gs2310pplusACLACEDIPNetworkPrefix OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network prefix.
default: 32,
0: No data.
range : 1 - 32"
::= { gs2310pplusACLACEEntry 34 }
gs2310pplusACLACEIPProtocol OBJECT-TYPE
SYNTAX Integer32(0..257)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256"
::= { gs2310pplusACLACEEntry 36 }
gs2310pplusACLACEIPFlagsTTL OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 37 }
gs2310pplusACLACEIPFlagsOptions OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 38 }
gs2310pplusACLACEIPFlagsFragment OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 39 }
gs2310pplusACLACEICMPType OBJECT-TYPE
SYNTAX Integer32(0..257)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256"
::= { gs2310pplusACLACEEntry 40 }
gs2310pplusACLACEICMPCode OBJECT-TYPE
SYNTAX Integer32(0..257)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257"
::= { gs2310pplusACLACEEntry 41 }
gs2310pplusACLACESourcePortMin OBJECT-TYPE
SYNTAX Integer32(0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536"
::= { gs2310pplusACLACEEntry 42 }
gs2310pplusACLACESourcePortMax OBJECT-TYPE
SYNTAX Integer32(0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536"
::= { gs2310pplusACLACEEntry 43 }
gs2310pplusACLACEDestPortMin OBJECT-TYPE
SYNTAX Integer32(0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535"
::= { gs2310pplusACLACEEntry 44 }
gs2310pplusACLACEDestPortMax OBJECT-TYPE
SYNTAX Integer32(0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535"
::= { gs2310pplusACLACEEntry 45 }
gs2310pplusACLACETCPFlagsFin OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 46 }
gs2310pplusACLACETCPFlagsSyn OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 47 }
gs2310pplusACLACETCPFlagsRst OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 48 }
gs2310pplusACLACETCPFlagsPsh OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 49 }
gs2310pplusACLACETCPFlagsAck OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 50 }
gs2310pplusACLACETCPFlagsUrg OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2310pplusACLACEEntry 51 }
gs2310pplusACLACERowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: active
2: notInservice
4: destroy
5: undo"
::= { gs2310pplusACLACEEntry 66 }
gs2310pplusACLACEClear OBJECT-TYPE
SYNTAX INTEGER { noAction(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : No action
1 : Clear all ACL counters."
::= { gs2310pplusACLACE 3 }
gs2310pplusACLACEMoveACEID OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Move ACE,
default: 0
ACE ID must be exist.
range : 1 - 256."
::= { gs2310pplusACLACE 4 }
gs2310pplusACLACEMoveNextACEID OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Move ACE,
default: 0
If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256."
::= { gs2310pplusACLACE 5 }
gs2310pplusACLACEStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSACLACEStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" ACL ACE Status entry. "
::= { gs2310pplusACLACE 6 }
gs2310pplusACLACEStatusEntry OBJECT-TYPE
SYNTAX GS2310PPLUSACLACEStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusACLACEStatusIndex }
::= { gs2310pplusACLACEStatusTable 1 }
GS2310PPLUSACLACEStatusEntry ::= SEQUENCE {
gs2310pplusACLACEStatusIndex Integer32,
gs2310pplusACLACEStatusUser DisplayString,
gs2310pplusACLACEStatusID Integer32,
gs2310pplusACLACEStatusIngressPort DisplayString,
gs2310pplusACLACEStatusFrameType DisplayString,
gs2310pplusACLACEStatusAction DisplayString,
gs2310pplusACLACEStatusRateLimiter DisplayString,
gs2310pplusACLACEStatusPortCopy DisplayString,
gs2310pplusACLACEStatusMirror DisplayString,
gs2310pplusACLACEStatusCPU DisplayString,
gs2310pplusACLACEStatusCounter Counter32,
gs2310pplusACLACEStatusConflict DisplayString
}
gs2310pplusACLACEStatusIndex OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusACLACEStatusEntry 1 }
gs2310pplusACLACEStatusUser OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the ACL user.
S : Static.
IPMG : IP Management.
IPSG : IP Source Guard.
IPMC : IPMC.
ARPI : Arp Inspection.
UPnP : UPnP.
DHCP : DHCP. "
::= { gs2310pplusACLACEStatusEntry 2 }
gs2310pplusACLACEStatusID OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ACE ID.
range : 1 - 256. "
::= { gs2310pplusACLACEStatusEntry 3 }
gs2310pplusACLACEStatusIngressPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port. "
::= { gs2310pplusACLACEStatusEntry 4 }
gs2310pplusACLACEStatusFrameType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the frame type of the ACE. "
::= { gs2310pplusACLACEStatusEntry 5 }
gs2310pplusACLACEStatusAction OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the forwarding action of the ACE. "
::= { gs2310pplusACLACEStatusEntry 6 }
gs2310pplusACLACEStatusRateLimiter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the rate limiter number of the ACE. "
::= { gs2310pplusACLACEStatusEntry 7 }
gs2310pplusACLACEStatusPortCopy OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. "
::= { gs2310pplusACLACEStatusEntry 8 }
gs2310pplusACLACEStatusMirror OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Specify the mirror operation of this port. "
::= { gs2310pplusACLACEStatusEntry 9 }
gs2310pplusACLACEStatusCPU OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Forward packet that matched the specific ACE to CPU. "
::= { gs2310pplusACLACEStatusEntry 10 }
gs2310pplusACLACEStatusCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The counter indicates the number of times the ACE was hit by a frame. "
::= { gs2310pplusACLACEStatusEntry 11 }
gs2310pplusACLACEStatusConflict OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations. "
::= { gs2310pplusACLACEStatusEntry 12 }
gs2310pplusLoopProtection OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 12 }
gs2310pplusLoopProtectionConfig OBJECT IDENTIFIER ::= { gs2310pplusLoopProtection 1 }
gs2310pplusLoopProtectionGlobalEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection mode.
0: disable,
1: enable,
default: disable. "
::= { gs2310pplusLoopProtectionConfig 1 }
gs2310pplusLoopProtectionTranmisstionTime OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection transmit interval.
default: 5,
range: 1-10. "
::= { gs2310pplusLoopProtectionConfig 2 }
gs2310pplusLoopProtectionShutdownTime OBJECT-TYPE
SYNTAX Integer32(0..604800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection shutdown time.
default: 180,
range: 0-604800. "
::= { gs2310pplusLoopProtectionConfig 3 }
gs2310pplusLoopProtectionConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSLoopProtectionConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Loop Protection configurations. "
::= { gs2310pplusLoopProtectionConfig 4 }
gs2310pplusLoopProtectionConfigurationEntry OBJECT-TYPE
SYNTAX GS2310PPLUSLoopProtectionConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusLoopProtectionConfPort }
::= { gs2310pplusLoopProtectionConfigurationTable 1 }
GS2310PPLUSLoopProtectionConfigurationEntry ::= SEQUENCE {
gs2310pplusLoopProtectionConfPort Integer32,
gs2310pplusLoopProtectionConfEnable INTEGER,
gs2310pplusLoopProtectionConfAction INTEGER,
gs2310pplusLoopProtectionConfTxmode INTEGER
}
gs2310pplusLoopProtectionConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusLoopProtectionConfigurationEntry 1 }
gs2310pplusLoopProtectionConfEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection port mode.
0: disable,
1: enable,
default: enable. "
::= { gs2310pplusLoopProtectionConfigurationEntry 2 }
gs2310pplusLoopProtectionConfAction OBJECT-TYPE
SYNTAX INTEGER { shutdown(0), shutdownLog(1), log(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure loop protection port action.
0: Shutdown port,
1: Shutdown port and Log,
2: Log Only,
default: Shutdown port. "
::= { gs2310pplusLoopProtectionConfigurationEntry 3 }
gs2310pplusLoopProtectionConfTxmode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection port transmit mode.
0: disable,
1: enable,
default: enable. "
::= { gs2310pplusLoopProtectionConfigurationEntry 4 }
gs2310pplusLoopProtectionStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSLoopProtectionStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Loop Protection Status. "
::= { gs2310pplusLoopProtection 2 }
gs2310pplusLoopProtectionStatusEntry OBJECT-TYPE
SYNTAX GS2310PPLUSLoopProtectionStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusLoopProtectionStatusPort }
::= { gs2310pplusLoopProtectionStatusTable 1 }
GS2310PPLUSLoopProtectionStatusEntry ::= SEQUENCE {
gs2310pplusLoopProtectionStatusPort Integer32,
gs2310pplusLoopProtectionStatusAction DisplayString,
gs2310pplusLoopProtectionStatusTransmit DisplayString,
gs2310pplusLoopProtectionStatusLoops Integer32,
gs2310pplusLoopProtectionStatusStatus DisplayString,
gs2310pplusLoopProtectionStatusLoop DisplayString,
gs2310pplusLoopProtectionStatusTimeLastLoop DisplayString
}
gs2310pplusLoopProtectionStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusLoopProtectionStatusEntry 1 }
gs2310pplusLoopProtectionStatusAction OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The currently configured port action. "
::= { gs2310pplusLoopProtectionStatusEntry 2 }
gs2310pplusLoopProtectionStatusTransmit OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The currently configured port transmit mode. "
::= { gs2310pplusLoopProtectionStatusEntry 3 }
gs2310pplusLoopProtectionStatusLoops OBJECT-TYPE
SYNTAX Integer32(0..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of loops detected on this port. "
::= { gs2310pplusLoopProtectionStatusEntry 4 }
gs2310pplusLoopProtectionStatusStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current loop protection status of the port. "
::= { gs2310pplusLoopProtectionStatusEntry 5 }
gs2310pplusLoopProtectionStatusLoop OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Whether a loop is currently detected on the port. "
::= { gs2310pplusLoopProtectionStatusEntry 6 }
gs2310pplusLoopProtectionStatusTimeLastLoop OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The time of the last loop event detected. "
::= { gs2310pplusLoopProtectionStatusEntry 7 }
gs2310pplusPoe OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 13 }
gs2310pplusPoeStatus OBJECT IDENTIFIER ::= { gs2310pplusPoe 1 }
gs2310pplusPoeStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPoeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure PoE Scheduling Table. "
::= { gs2310pplusPoeStatus 1 }
gs2310pplusPoeStatusEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPoeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPoeStatusLocalPort }
::= { gs2310pplusPoeStatusTable 1 }
GS2310PPLUSPoeStatusEntry ::= SEQUENCE {
gs2310pplusPoeStatusLocalPort Integer32,
gs2310pplusPoeStatusPDclass INTEGER,
gs2310pplusPoeStatusPowerRequested DisplayString,
gs2310pplusPoeStatusPowerAllocated DisplayString,
gs2310pplusPoeStatusPowerUsed DisplayString,
gs2310pplusPoeStatusCurrentUsed DisplayString,
gs2310pplusPoeStatusPriority DisplayString,
gs2310pplusPoeStatusPortStatus DisplayString
}
gs2310pplusPoeStatusLocalPort OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusPoeStatusEntry 1}
gs2310pplusPoeStatusPDclass OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the QCL user.
0: Max. power 15.4 W,
1: Max. power 4.0 W,
2: Max. power 7.0 W,
3: Max. power 15.4 W,
4: Max. power 30.0 W. "
::= { gs2310pplusPoeStatusEntry 2 }
gs2310pplusPoeStatusPowerRequested OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Power Requested shows the requested amount of power the PD wants to be reserved. "
::= { gs2310pplusPoeStatusEntry 3}
gs2310pplusPoeStatusPowerAllocated OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Power Allocated shows the amount of power the switch has allocated for the PD. "
::= { gs2310pplusPoeStatusEntry 4}
gs2310pplusPoeStatusPowerUsed OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Power Used shows how much power the PD currently is using. "
::= { gs2310pplusPoeStatusEntry 5}
gs2310pplusPoeStatusCurrentUsed OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Power Used shows how much current the PD currently is using. "
::= { gs2310pplusPoeStatusEntry 6}
gs2310pplusPoeStatusPriority OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Priority shows the port's priority configured by the user. "
::= { gs2310pplusPoeStatusEntry 7}
gs2310pplusPoeStatusPortStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Port Status shows the port's status. "
::= { gs2310pplusPoeStatusEntry 8}
gs2310pplusPoeStatusTotalPowerRequested OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Total Power Requested."
::= { gs2310pplusPoeStatus 2}
gs2310pplusPoeStatusTotalPowerAllocated OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Total Power allocated."
::= { gs2310pplusPoeStatus 3}
gs2310pplusPoeStatusTotalPowerUsed OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Total Power Used."
::= { gs2310pplusPoeStatus 4}
gs2310pplusPoeStatusTotalCurrentUsed OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Total Current Used."
::= { gs2310pplusPoeStatus 5}
gs2310pplusPoeMcuVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" PoE MCU version."
::= { gs2310pplusPoeStatus 6 }
gs2310pplusPoePowerDelay OBJECT IDENTIFIER ::= { gs2310pplusPoe 2 }
gs2310pplusPoePowerDelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPoePowerDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure PoE Power Delay mode. "
::= { gs2310pplusPoePowerDelay 1 }
gs2310pplusPoePowerDelayEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPoePowerDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPoePowerDelayPort }
::= { gs2310pplusPoePowerDelayTable 1 }
GS2310PPLUSPoePowerDelayEntry ::= SEQUENCE {
gs2310pplusPoePowerDelayPort Integer32,
gs2310pplusPoePowerDelayMode INTEGER,
gs2310pplusPoePowerDelayTime Integer32
}
gs2310pplusPoePowerDelayPort OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusPoePowerDelayEntry 1 }
gs2310pplusPoePowerDelayMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on / off the power delay function,
0: disable,
1: enable,
default: disable. "
::= { gs2310pplusPoePowerDelayEntry 2 }
gs2310pplusPoePowerDelayTime OBJECT-TYPE
SYNTAX Integer32(0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set Delay Time,
default: 0,
range: 0-300 sec. "
::= { gs2310pplusPoePowerDelayEntry 3 }
gs2310pplusPoeAutoCheck OBJECT IDENTIFIER ::= { gs2310pplusPoe 3 }
gs2310pplusPoeAutoCheckPingCheck OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"connection between PoE port and power device.
0: disable,
1: enable,
default: disable. "
::= { gs2310pplusPoeAutoCheck 1 }
gs2310pplusPoeAutoCheckTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPoeAutoCheckEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure PoE Power Delay mode. "
::= { gs2310pplusPoeAutoCheck 2 }
gs2310pplusPoeAutoCheckEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPoeAutoCheckEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPoeAutoCheckPort }
::= { gs2310pplusPoeAutoCheckTable 1 }
GS2310PPLUSPoeAutoCheckEntry ::= SEQUENCE {
gs2310pplusPoeAutoCheckPort Integer32,
gs2310pplusPoeAutoCheckPingIPAddress DisplayString,
gs2310pplusPoeAutoCheckIntervalTime Integer32,
gs2310pplusPoeAutoCheckRetryTime Integer32,
gs2310pplusPoeAutoCheckFailureLog DisplayString,
gs2310pplusPoeAutoCheckFailureAction INTEGER,
gs2310pplusPoeAutoCheckRebootTime Integer32
}
gs2310pplusPoeAutoCheckPort OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusPoeAutoCheckEntry 1 }
gs2310pplusPoeAutoCheckPingIPAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address the system should ping.
default: 0.0.0.0 . "
::= { gs2310pplusPoeAutoCheckEntry 2 }
gs2310pplusPoeAutoCheckIntervalTime OBJECT-TYPE
SYNTAX Integer32(10..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device will send checking message to PD each interval time.
default: 30,
range: 10-120 sec. "
::= { gs2310pplusPoeAutoCheckEntry 3 }
gs2310pplusPoeAutoCheckRetryTime OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It will retry to send detection again.
default: 3,
range: 1-5. "
::= { gs2310pplusPoeAutoCheckEntry 4 }
gs2310pplusPoeAutoCheckFailureLog OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Failure loggings counter. "
::= { gs2310pplusPoeAutoCheckEntry 5 }
gs2310pplusPoeAutoCheckFailureAction OBJECT-TYPE
SYNTAX INTEGER { nothing(0), reboot(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It will retry to send detection again,
0: Nothing,
1: Reboot Remote PD,
default: Nothing. "
::= { gs2310pplusPoeAutoCheckEntry 6 }
gs2310pplusPoeAutoCheckRebootTime OBJECT-TYPE
SYNTAX Integer32(3..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When PD has been rebooted, the PoE port restored power after the specified time.
default: 15,
range: 3-120 sec. "
::= { gs2310pplusPoeAutoCheckEntry 7 }
gs2310pplusPoeScheduling OBJECT IDENTIFIER ::= { gs2310pplusPoe 4 }
gs2310pplusPoeSchedulingTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPoeSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure PoE Scheduling Table. "
::= { gs2310pplusPoeScheduling 1 }
gs2310pplusPoeSchedulingEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPoeSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPoeSchedulingPort }
::= { gs2310pplusPoeSchedulingTable 1 }
GS2310PPLUSPoeSchedulingEntry ::= SEQUENCE {
gs2310pplusPoeSchedulingPort Integer32,
gs2310pplusPoeSchedulingStatus INTEGER
}
gs2310pplusPoeSchedulingPort OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusPoeSchedulingEntry 1 }
gs2310pplusPoeSchedulingStatus OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE Scheduling Status.
0: Disable,
1: Enable,
default: Disable. "
::= { gs2310pplusPoeSchedulingEntry 2 }
gs2310pplusPoeSchedulingTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPoeSchedulingTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Poe Scheduling Time Config. "
::= { gs2310pplusPoeScheduling 2 }
gs2310pplusPoeSchedulingTimeEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPoeSchedulingTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPoeSchedulingTimePort, gs2310pplusPoeSchedulingTimeWeek, gs2310pplusPoeSchedulingTimeHour }
::= { gs2310pplusPoeSchedulingTimeTable 1 }
GS2310PPLUSPoeSchedulingTimeEntry ::= SEQUENCE {
gs2310pplusPoeSchedulingTimePort Integer32,
gs2310pplusPoeSchedulingTimeWeek INTEGER,
gs2310pplusPoeSchedulingTimeHour Integer32,
gs2310pplusPoeSchedulingProvidePower INTEGER
}
gs2310pplusPoeSchedulingTimePort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusPoeSchedulingTimeEntry 1 }
gs2310pplusPoeSchedulingTimeWeek OBJECT-TYPE
SYNTAX INTEGER {
monday(1),
tuseday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6),
sunday(7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-7,
Sunday:7, Monday:1, Tuseday:2, Wednesday:3, Thursday:4, Friday:5, Saturday:6. "
::= { gs2310pplusPoeSchedulingTimeEntry 2 }
gs2310pplusPoeSchedulingTimeHour OBJECT-TYPE
SYNTAX Integer32(1..24)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-24,
24: hour 0, 1: hour 1, 2: hour2..."
::= { gs2310pplusPoeSchedulingTimeEntry 3 }
gs2310pplusPoeSchedulingProvidePower OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: disable,
1: enable,
default: disable. "
::= { gs2310pplusPoeSchedulingTimeEntry 4 }
gs2310pplusPoeConfiguration OBJECT IDENTIFIER ::= { gs2310pplusPoe 5 }
gs2310pplusPoeConfigurationPrimaryPowerSupply OBJECT-TYPE
SYNTAX Integer32(0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It must be defined what amount of power the primary and backup power sources
can deliver. "
::= { gs2310pplusPoeConfiguration 1 }
gs2310pplusPoeConfigurationRetryTime OBJECT-TYPE
SYNTAX Integer32(0|5|10|20|30|40|50|60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The period (in seconds) for trying to turn on an overloaded PoE port.
0: disable,
5 sec,10 sec,20 sec,30 sec,40 sec,50 sec,60 sec,
default: 60 sec. "
::= { gs2310pplusPoeConfiguration 2 }
gs2310pplusPoeConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPoeConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure PoE Configuration mode. "
::= { gs2310pplusPoeConfiguration 3 }
gs2310pplusPoeConfigurationEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPoeConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPoeConfigurationPort }
::= { gs2310pplusPoeConfigurationTable 1 }
GS2310PPLUSPoeConfigurationEntry ::= SEQUENCE {
gs2310pplusPoeConfigurationPort Integer32,
gs2310pplusPoeConfigurationPoEMode INTEGER,
gs2310pplusPoeConfigurationPriority INTEGER,
gs2310pplusPoeConfigurationMaximumPower DisplayString,
gs2310pplusPoeConfigurationDetection INTEGER,
gs2310pplusPoeConfigurationReset INTEGER
}
gs2310pplusPoeConfigurationPort OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusPoeConfigurationEntry 1 }
gs2310pplusPoeConfigurationPoEMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PoE Mode represents the PoE operating mode for the port.
0: Disable,
1: Enable,
default: Enable. "
::= { gs2310pplusPoeConfigurationEntry 2 }
gs2310pplusPoeConfigurationPriority OBJECT-TYPE
SYNTAX INTEGER { low(0), high(1), critical(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Priority represents the ports priority. There are three levels of power priority named Low, High and Critical.
0: Low,
1: High,
2: Critical,
default: Low. "
::= { gs2310pplusPoeConfigurationEntry 3 }
gs2310pplusPoeConfigurationMaximumPower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum Power value contains a numerical value that indicates the maximum
power in watts that can be delivered to a remote device.
default: 15.4[W],
max: 30[W]. "
::= { gs2310pplusPoeConfigurationEntry 4 }
gs2310pplusPoeConfigurationDetection OBJECT-TYPE
SYNTAX INTEGER(0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure PoE port capacitor detection.
0: No Detection(read only),
1: legacy,
2: 4-point,
3: 4-point-legacy,
4: 2-point,
5: 2-point-legacy,
default: 4-point. "
::= { gs2310pplusPoeConfigurationEntry 5 }
gs2310pplusPoeConfigurationReset OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the specific PoE port.
0: Disable,
1: Enable,
default: Disable. "
::= { gs2310pplusPoeConfigurationEntry 6 }
gs2310pplusPoeConfigurationLegacyMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Legacy Detection.
0: Disable,
1: Enable,
default: Disable. "
::= { gs2310pplusPoeConfiguration 4 }
gs2310pplusQos OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 14 }
gs2310pplusQosPortClassification OBJECT IDENTIFIER ::= { gs2310pplusQos 1 }
gs2310pplusQosPortClassificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosPortClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" QoS Ingress Port Classification . "
::= { gs2310pplusQosPortClassification 1 }
gs2310pplusQosPortClassificationEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosPortClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosPortClassificationPort }
::= { gs2310pplusQosPortClassificationTable 1 }
GS2310PPLUSQosPortClassificationEntry ::= SEQUENCE {
gs2310pplusQosPortClassificationPort Integer32,
gs2310pplusQosPortClassificationQoSclass Integer32,
gs2310pplusQosPortClassificationDPlevel Integer32,
gs2310pplusQosPortClassificationPCP Integer32,
gs2310pplusQosPortClassificationDEI INTEGER,
gs2310pplusQosPortClassificationTagClass INTEGER,
gs2310pplusQosPortClassificationDSCPBased INTEGER,
gs2310pplusQosPortClassificationAddressMode INTEGER
}
gs2310pplusQosPortClassificationPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusQosPortClassificationEntry 1 }
gs2310pplusQosPortClassificationQoSclass OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the default QoS class, i.e., the QoS class
for frames not classified in any other way. There is
a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority.
Note: If the QoS class has been dynamically changed, then
the actual QoS class is shown in parentheses after the
configured QoS class.
Configure the default QoS class.
range: 0-7,
default: 0. "
::= { gs2310pplusQosPortClassificationEntry 2 }
gs2310pplusQosPortClassificationDPlevel OBJECT-TYPE
SYNTAX Integer32(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DP level for frames not classified in any other way.
range: 0-1,
default: 0. "
::= { gs2310pplusQosPortClassificationEntry 3 }
gs2310pplusQosPortClassificationPCP OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Priority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame.
range: 0-7,
default: 0. "
::= { gs2310pplusQosPortClassificationEntry 4 }
gs2310pplusQosPortClassificationDEI OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Drop Eligible Indicator. It is a 1-bit field in the VLAN.
range 0-1,
default: 0. "
::= { gs2310pplusQosPortClassificationEntry 5 }
gs2310pplusQosPortClassificationTagClass OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure the classification mode for tagged frames.
0: Disable,
1: Enable,
default: Disable. "
::= { gs2310pplusQosPortClassificationEntry 6 }
gs2310pplusQosPortClassificationDSCPBased OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Click to Enable DSCP Based QoS Ingress Port Classification.
0: disable,
1: enable,
default: disable. "
::= { gs2310pplusQosPortClassificationEntry 7 }
gs2310pplusQosPortClassificationAddressMode OBJECT-TYPE
SYNTAX INTEGER { source(0), destination(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP/MAC address mode specifying whether the QCL classification
must be based on source (SMAC/SIP) or destination (DMAC/DIP)
addresses on this port.
0: source,
1: destination,
default: source. "
::= { gs2310pplusQosPortClassificationEntry 8 }
gs2310pplusQoSIngressPortTagClassificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQoSIngressPortTagClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show QoS Ingress Port Tag Classification. "
::= { gs2310pplusQosPortClassification 2 }
gs2310pplusQoSIngressPortTagClassificationEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQoSIngressPortTagClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQoSIngressPortTagClassificationPort, gs2310pplusQoSIngressPortTagPCP, gs2310pplusQoSIngressPortTagDEI }
::= { gs2310pplusQoSIngressPortTagClassificationTable 1 }
GS2310PPLUSQoSIngressPortTagClassificationEntry ::= SEQUENCE {
gs2310pplusQoSIngressPortTagClassificationPort Integer32,
gs2310pplusQoSIngressPortTagPCP INTEGER,
gs2310pplusQoSIngressPortTagDEI INTEGER,
gs2310pplusQoSIngressPortTagQosClass Integer32,
gs2310pplusQoSIngressPortTagDPLevel Integer32
}
gs2310pplusQoSIngressPortTagClassificationPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusQoSIngressPortTagClassificationEntry 1 }
gs2310pplusQoSIngressPortTagPCP OBJECT-TYPE
SYNTAX INTEGER { pcp0(1), pcp1(2), pcp2(3), pcp3(4), pcp4(5), pcp5(6), pcp6(7), pcp7(8) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-8,
PCP0:1, PCP1:2... "
::= { gs2310pplusQoSIngressPortTagClassificationEntry 2 }
gs2310pplusQoSIngressPortTagDEI OBJECT-TYPE
SYNTAX INTEGER { dei0(1), dei1(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-2,
DEI0:1, DEI1:2. "
::= { gs2310pplusQoSIngressPortTagClassificationEntry 3 }
gs2310pplusQoSIngressPortTagQosClass OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 0-7. "
::= { gs2310pplusQoSIngressPortTagClassificationEntry 4 }
gs2310pplusQoSIngressPortTagDPLevel OBJECT-TYPE
SYNTAX Integer32 (0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 0-1. "
::= { gs2310pplusQoSIngressPortTagClassificationEntry 5 }
gs2310pplusQosPortPolicingTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosPortPolicingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the Policer settings for all switch ports. "
::= { gs2310pplusQos 2 }
gs2310pplusQosPortPolicingEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosPortPolicingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosPortPolicingPort }
::= { gs2310pplusQosPortPolicingTable 1 }
GS2310PPLUSQosPortPolicingEntry ::= SEQUENCE {
gs2310pplusQosPortPolicingPort Integer32,
gs2310pplusQosPortPolicingMode INTEGER,
gs2310pplusQosPortPolicingRate Integer32,
gs2310pplusQosPortPolicingUnit INTEGER,
gs2310pplusQosPortPolicingFlowControl INTEGER
}
gs2310pplusQosPortPolicingPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusQosPortPolicingEntry 1 }
gs2310pplusQosPortPolicingMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls whether the policer is enabled on this switch port.
0: disable,
1: enable,
default: disable. "
::= { gs2310pplusQosPortPolicingEntry 2 }
gs2310pplusQosPortPolicingRate OBJECT-TYPE
SYNTAX Integer32(100..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the rate for the policer.
range: 100-10000000(kbps/fps),
default: 500(kbps). "
::= { gs2310pplusQosPortPolicingEntry 3 }
gs2310pplusQosPortPolicingUnit OBJECT-TYPE
SYNTAX INTEGER { kbps(0), fps(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the unit of measure for the policer rate.
0: kbps,
1: fps,
default: kbps. "
::= { gs2310pplusQosPortPolicingEntry 4 }
gs2310pplusQosPortPolicingFlowControl OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If flow control is enabled and the port is in flow control mode,
then pause frames are sent instead of discarding frames.
0: disable,
1: enable,
default: disable. "
::= { gs2310pplusQosPortPolicingEntry 5 }
gs2310pplusQosPortScheduler OBJECT IDENTIFIER ::= { gs2310pplusQos 3 }
gs2310pplusQosPortSchedulerModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosPortSchedulerModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS Port Scheduler Mode settings for all switch ports. "
::= { gs2310pplusQosPortScheduler 1 }
gs2310pplusQosPortSchedulerModeEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosPortSchedulerModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosSchedulerModePort }
::= { gs2310pplusQosPortSchedulerModeTable 1 }
GS2310PPLUSQosPortSchedulerModeEntry ::= SEQUENCE {
gs2310pplusQosSchedulerModePort Integer32,
gs2310pplusQosSchedulerMode INTEGER,
gs2310pplusQosSchedulerShaper INTEGER,
gs2310pplusQosSchedulerShaperRate Integer32
}
gs2310pplusQosSchedulerModePort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusQosPortSchedulerModeEntry 1 }
gs2310pplusQosSchedulerMode OBJECT-TYPE
SYNTAX INTEGER { strictPriority(0), weighted(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls whether the scheduler mode is Strict Priority or Weighted
on this switch port.
0:Strict Priority
1:Weighted
default: Strict Priority. "
::= { gs2310pplusQosPortSchedulerModeEntry 2 }
gs2310pplusQosSchedulerShaper OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls whether the port shaper is enabled
0: Disable
1: Enable.
default: disable. "
::= { gs2310pplusQosPortSchedulerModeEntry 3 }
gs2310pplusQosSchedulerShaperRate OBJECT-TYPE
SYNTAX Integer32(100..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the rate for the port shaper.
range: 100-1000000
default: 500 kbps. "
::= { gs2310pplusQosPortSchedulerModeEntry 4 }
gs2310pplusQosPortSchedulerTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosPortSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Qos Port Scheduler. "
::= { gs2310pplusQosPortScheduler 2 }
gs2310pplusQosPortSchedulerEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosPortSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosSchedulerPort, gs2310pplusQosSchedulerPortQueue}
::= { gs2310pplusQosPortSchedulerTable 1 }
GS2310PPLUSQosPortSchedulerEntry ::= SEQUENCE {
gs2310pplusQosSchedulerPort Integer32,
gs2310pplusQosSchedulerPortQueue INTEGER,
gs2310pplusQosSchedulerPortQueueShaper INTEGER,
gs2310pplusQosSchedulerPortQueueShaperRate Integer32,
gs2310pplusQosSchedulerPortQueueShaperExcess INTEGER,
gs2310pplusQosSchedulerPortQueueSchedulerWeight Integer32,
gs2310pplusQosSchedulerPortQueueSchedulerPercent DisplayString
}
gs2310pplusQosSchedulerPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusQosPortSchedulerEntry 1 }
gs2310pplusQosSchedulerPortQueue OBJECT-TYPE
SYNTAX INTEGER { q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-8.
Q0: 1, Q1: 2, ... "
::= { gs2310pplusQosPortSchedulerEntry 2 }
gs2310pplusQosSchedulerPortQueueShaper OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: disable 1:enable,
default: 0. "
::= { gs2310pplusQosPortSchedulerEntry 3 }
gs2310pplusQosSchedulerPortQueueShaperRate OBJECT-TYPE
SYNTAX Integer32(100..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 100..1000000 kbps. "
::= { gs2310pplusQosPortSchedulerEntry 4 }
gs2310pplusQosSchedulerPortQueueShaperExcess OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: disable 1:enable,
default: 0. "
::= { gs2310pplusQosPortSchedulerEntry 5 }
gs2310pplusQosSchedulerPortQueueSchedulerWeight OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 1-100,
default: 17.
Only use in Q0 - Q5. Q6 & Q7 show 0 "
::= { gs2310pplusQosPortSchedulerEntry 6 }
gs2310pplusQosSchedulerPortQueueSchedulerPercent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Only use in Q0 - Q5. Q6 & Q7 show empty "
::= { gs2310pplusQosPortSchedulerEntry 7 }
gs2310pplusQosPortEgressTagRemarking OBJECT IDENTIFIER ::= { gs2310pplusQos 4 }
gs2310pplusQosPortEgressTagRemarkingTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosPortEgressTagRemarkingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports. "
::= { gs2310pplusQosPortEgressTagRemarking 1 }
gs2310pplusQosPortEgressTagRemarkingEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosPortEgressTagRemarkingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosEgressTagRemarkingPort }
::= { gs2310pplusQosPortEgressTagRemarkingTable 1 }
GS2310PPLUSQosPortEgressTagRemarkingEntry ::= SEQUENCE {
gs2310pplusQosEgressTagRemarkingPort Integer32,
gs2310pplusQosEgressTagRemarkingMode INTEGER
}
gs2310pplusQosEgressTagRemarkingPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusQosPortEgressTagRemarkingEntry 1 }
gs2310pplusQosEgressTagRemarkingMode OBJECT-TYPE
SYNTAX INTEGER { classified(0), default(1), mapped(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" the tag remarking mode for this port.
0:Classified, Use classified PCP/DEI values.
1:Default, Use default PCP/DEI values.
2:Mapped, Use mapped versions of QoS class and DP level."
::= { gs2310pplusQosPortEgressTagRemarkingEntry 2 }
gs2310pplusQosPortEgressTagRemarkingDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosPortEgressTagRemarkingDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports. "
::= { gs2310pplusQosPortEgressTagRemarking 2 }
gs2310pplusQosPortEgressTagRemarkingDefEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosPortEgressTagRemarkingDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosEgressTagRemarkingDefPort }
::= { gs2310pplusQosPortEgressTagRemarkingDefTable 1 }
GS2310PPLUSQosPortEgressTagRemarkingDefEntry ::= SEQUENCE {
gs2310pplusQosEgressTagRemarkingDefPort Integer32,
gs2310pplusQosEgressTagRemarkingDefPCP Integer32,
gs2310pplusQosEgressTagRemarkingDefDEI INTEGER
}
gs2310pplusQosEgressTagRemarkingDefPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusQosPortEgressTagRemarkingDefEntry 1 }
gs2310pplusQosEgressTagRemarkingDefPCP OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the default PCP
Range : 0-7"
::= { gs2310pplusQosPortEgressTagRemarkingDefEntry 2 }
gs2310pplusQosEgressTagRemarkingDefDEI OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" controls the DEI
Range 0-1"
::= { gs2310pplusQosPortEgressTagRemarkingDefEntry 3 }
gs2310pplusQosPortEgressTagRemarkingMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosPortEgressTagRemarkingMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Qos Port Egress Tag Remarking Map. "
::= { gs2310pplusQosPortEgressTagRemarking 4 }
gs2310pplusQosPortEgressTagRemarkingMapEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosPortEgressTagRemarkingMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosPortEgressTagRemarkingMapPort, gs2310pplusQosTagRemarkingQoSClass, gs2310pplusQosTagRemarkingDPLevel }
::= { gs2310pplusQosPortEgressTagRemarkingMapTable 1 }
GS2310PPLUSQosPortEgressTagRemarkingMapEntry ::= SEQUENCE {
gs2310pplusQosPortEgressTagRemarkingMapPort Integer32,
gs2310pplusQosTagRemarkingQoSClass INTEGER,
gs2310pplusQosTagRemarkingDPLevel INTEGER,
gs2310pplusQosTagRemarkingPCP Integer32,
gs2310pplusQosTagRemarkingDEI INTEGER
}
gs2310pplusQosPortEgressTagRemarkingMapPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusQosPortEgressTagRemarkingMapEntry 1 }
gs2310pplusQosTagRemarkingQoSClass OBJECT-TYPE
SYNTAX INTEGER {
class0(1),
class1(2),
class2(3),
class3(4),
class4(5),
class5(6),
class6(7),
class7(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-8,
QoS Class0: 1, QoS Class1: 2... "
::= { gs2310pplusQosPortEgressTagRemarkingMapEntry 2 }
gs2310pplusQosTagRemarkingDPLevel OBJECT-TYPE
SYNTAX INTEGER { level0(1), level1(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-2,
DP Level0: 1, DP Level1: 2. "
::= { gs2310pplusQosPortEgressTagRemarkingMapEntry 3 }
gs2310pplusQosTagRemarkingPCP OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 0-7. "
::= { gs2310pplusQosPortEgressTagRemarkingMapEntry 4 }
gs2310pplusQosTagRemarkingDEI OBJECT-TYPE
SYNTAX INTEGER (0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 0-1. "
::= { gs2310pplusQosPortEgressTagRemarkingMapEntry 5 }
gs2310pplusQosPortDSCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosPortDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS Port DSCP Configuration settings for all switch ports. "
::= { gs2310pplusQos 5 }
gs2310pplusQosPortDSCPEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosPortDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosPortDSCPPort }
::= { gs2310pplusQosPortDSCPTable 1 }
GS2310PPLUSQosPortDSCPEntry ::= SEQUENCE {
gs2310pplusQosPortDSCPPort Integer32,
gs2310pplusQosPortDSCPIngressTranslate INTEGER,
gs2310pplusQosPortDSCPIngressClassify INTEGER,
gs2310pplusQosPortDSCPEgressRewrite INTEGER
}
gs2310pplusQosPortDSCPPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusQosPortDSCPEntry 1 }
gs2310pplusQosPortDSCPIngressTranslate OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure DSCP ingress translation mode.
0: disable,
1: enable,
default: disable. "
::= { gs2310pplusQosPortDSCPEntry 2 }
gs2310pplusQosPortDSCPIngressClassify OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Classification for a port have 4 different values.
range: 0-3,
0: disable,No Ingress DSCP Classification.
1: DSCP=0,Classify if incoming (or translated if enabled) DSCP is 0.
2: Selected,Classify only selected DSCP for which classification is
enabled as specified in DSCP Translation window for the specific DSCP.
3: All,Classify all DSCP.
default: disable. "
::= { gs2310pplusQosPortDSCPEntry 3 }
gs2310pplusQosPortDSCPEgressRewrite OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure the port egress rewriting mode.
range: 0-2
0: Disable,No Egress rewrite.
1: Enable, Rewrite enabled without remapping.
2: Remap DP Unaware , DSCP from analyzer is remapped and frame is
remarked with remapped DSCP value. The remapped DSCP value is always
taken from the DSCP Translation->Egress Remap DP0 table.
3: Remap DP Aware: DSCP from analyzer is remapped and frame is remarked
with remapped DSCP value. Depending on the DP level of the frame, the
remapped DSCP value is either taken from the DSCP Translation->Egress
Remap DP0 table or from the DSCP Translation->Egress Remap DP1 table.
default: disable. "
::= { gs2310pplusQosPortDSCPEntry 4 }
gs2310pplusQosDSCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS DSCP based QoS Ingress Classification settings for all switches. "
::= { gs2310pplusQos 6 }
gs2310pplusQosDSCPEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosDSCPList }
::= { gs2310pplusQosDSCPTable 1 }
GS2310PPLUSQosDSCPEntry ::= SEQUENCE {
gs2310pplusQosDSCPList Integer32,
gs2310pplusQosDSCP DisplayString,
gs2310pplusQosDSCPTrust INTEGER,
gs2310pplusQosDSCPQosClass Integer32,
gs2310pplusQosDSCPDPL INTEGER
}
gs2310pplusQosDSCPList OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" DSCP mapping table index(1-64). "
::= { gs2310pplusQosDSCPEntry 1 }
gs2310pplusQosDSCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of supported DSCP values are 64."
::= { gs2310pplusQosDSCPEntry 2 }
gs2310pplusQosDSCPTrust OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls whether a specific DSCP value is trusted. Only frames with
trusted DSCP values are mapped to a specific QoS class and Drop Precedence
Level. Frames with untrusted DSCP values are treated as a non-IP frame.
0: disable,
1: enable,
default: disable. "
::= { gs2310pplusQosDSCPEntry 3 }
gs2310pplusQosDSCPQosClass OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" QoS class.
range: 0-7,
default: 0. "
::= { gs2310pplusQosDSCPEntry 4 }
gs2310pplusQosDSCPDPL OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Drop Precedence Level.
range: 0-1,
default: disable. "
::= { gs2310pplusQosDSCPEntry 5 }
gs2310pplusQosDSCPTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosDSCPTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS DSCP Translation settings for all switches. "
::= { gs2310pplusQos 7 }
gs2310pplusQosDSCPTranslationEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosDSCPTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosDSCPTranslationList }
::= { gs2310pplusQosDSCPTranslationTable 1 }
GS2310PPLUSQosDSCPTranslationEntry ::= SEQUENCE {
gs2310pplusQosDSCPTranslationList Integer32,
gs2310pplusQosDSCPTranslationDSCPBasedId DisplayString,
gs2310pplusQosDSCPTranslationIngressTranslate Integer32,
gs2310pplusQosDSCPTranslationIngressClassify INTEGER,
gs2310pplusQosDSCPTranslationEgressRemapDP0 Integer32,
gs2310pplusQosDSCPTranslationEgressRemapDP1 Integer32
}
gs2310pplusQosDSCPTranslationList OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" DSCP translation table index(1-64). "
::= { gs2310pplusQosDSCPTranslationEntry 1 }
gs2310pplusQosDSCPTranslationDSCPBasedId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure global ingress DSCP translation table. "
::= { gs2310pplusQosDSCPTranslationEntry 2 }
gs2310pplusQosDSCPTranslationIngressTranslate OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DSCP at Ingress side can be translated to any of DSCP values.
range: 0-63,
default: 0. "
::= { gs2310pplusQosDSCPTranslationEntry 3 }
gs2310pplusQosDSCPTranslationIngressClassify OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure DSCP ingress classification.
0: disable,
1: enable,
default: disable. "
::= { gs2310pplusQosDSCPTranslationEntry 4 }
gs2310pplusQosDSCPTranslationEgressRemapDP0 OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the remapping for frames with DP level 0.
Select the DSCP value from select menu to which you want to remap.
range: 0-63,
default: 0. "
::= { gs2310pplusQosDSCPTranslationEntry 5 }
gs2310pplusQosDSCPTranslationEgressRemapDP1 OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the remapping for frames with DP level 1.
Select the DSCP value from select menu to which you want to remap.
range: 0-63,
default: 0. "
::= { gs2310pplusQosDSCPTranslationEntry 6 }
gs2310pplusQosDSCPClassificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosDSCPClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the mapping of QoS class to DSCP value. "
::= { gs2310pplusQos 8 }
gs2310pplusQosDSCPClassificationEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosDSCPClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosDSCPClassificationQoSClass, gs2310pplusQosDSCPClassificationDPL }
::= { gs2310pplusQosDSCPClassificationTable 1 }
GS2310PPLUSQosDSCPClassificationEntry ::= SEQUENCE {
gs2310pplusQosDSCPClassificationQoSClass INTEGER,
gs2310pplusQosDSCPClassificationDPL INTEGER,
gs2310pplusQosDSCPClassificationDSCP Integer32
}
gs2310pplusQosDSCPClassificationQoSClass OBJECT-TYPE
SYNTAX INTEGER {
class0(1),
class1(2),
class2(3),
class3(4),
class4(5),
class5(6),
class6(7),
class7(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Actual QoS class. Index 1~8 mean Qos Class 0~7."
::= { gs2310pplusQosDSCPClassificationEntry 1 }
gs2310pplusQosDSCPClassificationDPL OBJECT-TYPE
SYNTAX INTEGER(1|2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" DPL. Index 1~2 mean DPL 0~1."
::= { gs2310pplusQosDSCPClassificationEntry 2 }
gs2310pplusQosDSCPClassificationDSCP OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Select the classified DSCP value.
range: 0-63,
default: 0. "
::= { gs2310pplusQosDSCPClassificationEntry 3 }
gs2310pplusQosControlList OBJECT IDENTIFIER ::= { gs2310pplusQos 9 }
gs2310pplusQosQceCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create an Qos entry"
::= { gs2310pplusQosControlList 1 }
gs2310pplusQosQceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosQceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create Qos QCE entry. "
::= { gs2310pplusQosControlList 2 }
gs2310pplusQosQceEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosQceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosQceIndex }
::= { gs2310pplusQosQceTable 1 }
GS2310PPLUSQosQceEntry ::= SEQUENCE {
gs2310pplusQosQceIndex Integer32,
gs2310pplusQosQceID Integer32,
gs2310pplusQosQceNextID Integer32,
gs2310pplusQosQcePortMembers DisplayString,
gs2310pplusQosQceTag DisplayString,
gs2310pplusQosQceVID DisplayString,
gs2310pplusQosPCP DisplayString,
gs2310pplusQosDEI DisplayString,
gs2310pplusQosSMAC DisplayString,
gs2310pplusQosDMACType DisplayString,
gs2310pplusQosFrameType INTEGER,
gs2310pplusQosMacEtherType DisplayString,
gs2310pplusQosLLCSSAPAddr DisplayString,
gs2310pplusQosLLCDSAPAddr DisplayString,
gs2310pplusQosLLCControl DisplayString,
gs2310pplusQosSNAPPID DisplayString,
gs2310pplusQosIpv4Protocol DisplayString,
gs2310pplusQosIpv4ProtocolValue Integer32,
gs2310pplusQosIpv4ProtocolUDPSport DisplayString,
gs2310pplusQosIpv4ProtocolUDPDport DisplayString,
gs2310pplusQosIpv4ProtocolTCPSport DisplayString,
gs2310pplusQosIpv4ProtocolTCPDport DisplayString,
gs2310pplusQosIpv4Ip DisplayString,
gs2310pplusQosIpv4Mask DisplayString,
gs2310pplusQosIpv4IPFragment INTEGER,
gs2310pplusQosIpv4DSCP DisplayString,
gs2310pplusQosIpv6Protocol DisplayString,
gs2310pplusQosIpv6ProtocolValue Integer32,
gs2310pplusQosIpv6ProtocolUDPSport DisplayString,
gs2310pplusQosIpv6ProtocolUDPDport DisplayString,
gs2310pplusQosIpv6ProtocolTCPSport DisplayString,
gs2310pplusQosIpv6ProtocolTCPDport DisplayString,
gs2310pplusQosIpv6Ip DisplayString,
gs2310pplusQosIpv6Mask DisplayString,
gs2310pplusQosIpv6DSCP DisplayString,
gs2310pplusQosActionClass Integer32,
gs2310pplusQosActionDPL INTEGER,
gs2310pplusQosActionDSCP Integer32,
gs2310pplusQosQceRowStatus INTEGER
}
gs2310pplusQosQceIndex OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusQosQceEntry 1 }
gs2310pplusQosQceID OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If the QCE ID is specified and an entry with this QCE ID
already exists, the QCE will be modified. Otherwise, a
new QCE will be added.
range : 1 - 256. "
::= { gs2310pplusQosQceEntry 2 }
gs2310pplusQosQceNextID OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If the next QCE ID is non zero, the QCE will be placed
before this QCE in the list. If the next QCE ID is zero,
the QCE will be placed last in the list.
range : 1 - 256. "
::= { gs2310pplusQosQceEntry 3 }
gs2310pplusQosQcePortMembers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the ingress port of the QCE. Possible values are:
All: The QCE will match all ingress port.
Port: The QCE will match a specific ingress port.Format: 1,3-6."
::= { gs2310pplusQosQceEntry 4 }
gs2310pplusQosQceTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Value of Tag field can be 'Any', 'Untag' or 'Tag'. "
::= { gs2310pplusQosQceEntry 5 }
gs2310pplusQosQceVID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'. "
::= { gs2310pplusQosQceEntry 6 }
gs2310pplusQosPCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7)
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. "
::= { gs2310pplusQosQceEntry 7 }
gs2310pplusQosDEI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'. "
::= { gs2310pplusQosQceEntry 8 }
gs2310pplusQosSMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'. "
::= { gs2310pplusQosQceEntry 9 }
gs2310pplusQosDMACType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'. "
::= { gs2310pplusQosQceEntry 10 }
gs2310pplusQosFrameType OBJECT-TYPE
SYNTAX INTEGER {
any(1),
ethernet(2),
llc(3),
snap(4),
ipv4(5),
ipv6(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Frame Type can have any of the following values:
1: Any,
2: Ethernet,
3: LLC,
4: SNAP,
5: IPv4,
6: IPv6. "
::= { gs2310pplusQosQceEntry 11 }
gs2310pplusQosMacEtherType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' ,
but excluding 0x800(IPv4) and 0x86DD(IPv6),
range: 0000-FFFF,
default: Any."
::= { gs2310pplusQosQceEntry 12 }
gs2310pplusQosLLCSSAPAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any. "
::= { gs2310pplusQosQceEntry 13 }
gs2310pplusQosLLCDSAPAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any. "
::= { gs2310pplusQosQceEntry 14 }
gs2310pplusQosLLCControl OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid Control field can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any. "
::= { gs2310pplusQosQceEntry 15 }
gs2310pplusQosSNAPPID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any',
range: 0000-FFFF,
default: Any. "
::= { gs2310pplusQosQceEntry 16 }
gs2310pplusQosIpv4Protocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP protocol number: (Other, TCP or UDP) or 'Any'. "
::= { gs2310pplusQosQceEntry 17 }
gs2310pplusQosIpv4ProtocolValue OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Ipv4 Protocol is Other.
range: 0-255
default: 0. "
::= { gs2310pplusQosQceEntry 18 }
gs2310pplusQosIpv4ProtocolUDPSport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2310pplusQosQceEntry 19 }
gs2310pplusQosIpv4ProtocolUDPDport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2310pplusQosQceEntry 20 }
gs2310pplusQosIpv4ProtocolTCPSport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2310pplusQosQceEntry 21 }
gs2310pplusQosIpv4ProtocolTCPDport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2310pplusQosQceEntry 22 }
gs2310pplusQosIpv4Ip OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specific Source IP address in value format or value 0.0.0.0 is 'Any'.
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
(x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223.
If a port is configured to match on DMAC/DIP, this field is the
Destination IP address."
::= { gs2310pplusQosQceEntry 23 }
gs2310pplusQosIpv4Mask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specific IP address in mask format or value 0.0.0.0 is 'Any'. "
::= { gs2310pplusQosQceEntry 24 }
gs2310pplusQosIpv4IPFragment OBJECT-TYPE
SYNTAX INTEGER { any(0), no(1), yes(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IPv4 frame fragmented option:
2: yes,
1: no,
0: any. "
::= { gs2310pplusQosQceEntry 25 }
gs2310pplusQosIpv4DSCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63. "
::= { gs2310pplusQosQceEntry 26 }
gs2310pplusQosIpv6Protocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP protocol number: (Other, TCP or UDP) or 'Any'. "
::= { gs2310pplusQosQceEntry 27 }
gs2310pplusQosIpv6ProtocolValue OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" when IPv6 protocol is Other ,
range: 0-255. "
::= { gs2310pplusQosQceEntry 28 }
gs2310pplusQosIpv6ProtocolUDPSport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2310pplusQosQceEntry 29 }
gs2310pplusQosIpv6ProtocolUDPDport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2310pplusQosQceEntry 30 }
gs2310pplusQosIpv6ProtocolTCPSport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2310pplusQosQceEntry 31 }
gs2310pplusQosIpv6ProtocolTCPDport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2310pplusQosQceEntry 32 }
gs2310pplusQosIpv6Ip OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
If a port is configured to match on DMAC/DIP, this field is the
Destination IP address."
::= { gs2310pplusQosQceEntry 33 }
gs2310pplusQosIpv6Mask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. "
::= { gs2310pplusQosQceEntry 34 }
gs2310pplusQosIpv6DSCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63 including BE,
CS1-CS7, EF or AF11-AF43. "
::= { gs2310pplusQosQceEntry 35 }
gs2310pplusQosActionClass OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" QoS class: (0-7) or 8: Default."
::= { gs2310pplusQosQceEntry 36 }
gs2310pplusQosActionDPL OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DP Valid Drop Precedence Level can be (0-3) or 4: Default. "
::= { gs2310pplusQosQceEntry 37 }
gs2310pplusQosActionDSCP OBJECT-TYPE
SYNTAX Integer32(0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default. "
::= { gs2310pplusQosQceEntry 38 }
gs2310pplusQosQceRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: active2: notInservice 4: destroy"
::= { gs2310pplusQosQceEntry 39 }
gs2310pplusQosQceMoveID OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Move Qos,
default: 0
Qos ID must be exist.
range : 0 - 256."
::= { gs2310pplusQosControlList 3 }
gs2310pplusQosQceMoveNextID OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Move Qos,
default: 0
If the next Qos ID is non zero, the Qos will be placed before this Qos in the list.
If the next Qos ID is zero,the Qos will be placed last in the list.
range : 0 - 256. "
::= { gs2310pplusQosControlList 4 }
gs2310pplusQosQCLStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSQosQCLStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS DSCP Translation settings for all switches. "
::= { gs2310pplusQos 10 }
gs2310pplusQosQCLStatusEntry OBJECT-TYPE
SYNTAX GS2310PPLUSQosQCLStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusQosQCLStatusList }
::= { gs2310pplusQosQCLStatusTable 1 }
GS2310PPLUSQosQCLStatusEntry ::= SEQUENCE {
gs2310pplusQosQCLStatusList Integer32,
gs2310pplusQosQCLStatusUser DisplayString,
gs2310pplusQosQCLStatusQCEId DisplayString,
gs2310pplusQosQCLStatusFrameType DisplayString,
gs2310pplusQosQCLStatusPortlist DisplayString,
gs2310pplusQosQCLStatusActionClass DisplayString,
gs2310pplusQosQCLStatusActionDPL DisplayString,
gs2310pplusQosQCLStatusActionDSCP DisplayString,
gs2310pplusQosQCLStatusActionConflict DisplayString
}
gs2310pplusQosQCLStatusList OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" QCL table index. "
::= { gs2310pplusQosQCLStatusEntry 1}
gs2310pplusQosQCLStatusUser OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the QCL user. "
::= { gs2310pplusQosQCLStatusEntry 2 }
gs2310pplusQosQCLStatusQCEId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the index of QCE. "
::= { gs2310pplusQosQCLStatusEntry 3}
gs2310pplusQosQCLStatusFrameType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the type of frame to look for incomming frames.
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC: Only (LLC) frames are allowed.
SNAP: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
IPv6: The QCE will match only IPV6 frames."
::= { gs2310pplusQosQCLStatusEntry 4}
gs2310pplusQosQCLStatusPortlist OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the list of ports configured with the QCE. "
::= { gs2310pplusQosQCLStatusEntry 5}
gs2310pplusQosQCLStatusActionClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Classified QoS class; if a frame matches the QCE it will be put in the
queue. "
::= { gs2310pplusQosQCLStatusEntry 6}
gs2310pplusQosQCLStatusActionDPL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Drop Precedence Level; if a frame matches the QCE then DP level will
set to value displayed under DPL column."
::= { gs2310pplusQosQCLStatusEntry 7}
gs2310pplusQosQCLStatusActionDSCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column."
::= { gs2310pplusQosQCLStatusEntry 8}
gs2310pplusQosQCLStatusActionConflict OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column. "
::= { gs2310pplusQosQCLStatusEntry 9}
gs2310pplusQosStormControl OBJECT IDENTIFIER ::= { gs2310pplusQos 11 }
gs2310pplusQoSStormControlUC OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the storm control status for the Unicast frame type.
default: 0
0: disable
1: enable"
::= { gs2310pplusQosStormControl 2 }
gs2310pplusQoSStormControlUCRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8,
16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K,
512K or 1024K."
::= { gs2310pplusQosStormControl 3 }
gs2310pplusQoSStormControlMC OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the storm control status for the Multicast frame type.
default: 0
0: disable
1: enable"
::= { gs2310pplusQosStormControl 4 }
gs2310pplusQoSStormControlMCRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8,
16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K,
512K or 1024K."
::= { gs2310pplusQosStormControl 5 }
gs2310pplusQoSStormControlBC OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the storm control status for the Broadcast frame type.
default: 0
0: disable
1: enable"
::= { gs2310pplusQosStormControl 6 }
gs2310pplusQoSStormControlBCRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8,
16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K,
512K or 1024K."
::= { gs2310pplusQosStormControl 7 }
gs2310pplusVlan OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 15 }
gs2310pplusVlanPorts OBJECT IDENTIFIER ::= { gs2310pplusVlan 1 }
gs2310pplusVlanPortsTPIDforCustomSport OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the TPID used for Custom S-ports. This is a global setting for
all the Custom S-ports.
range: 0x0600-0xffff,
default: 0x88a8. "
::= { gs2310pplusVlanPorts 1 }
gs2310pplusVlanPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSVlanPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan ports Configuration mode. "
::= { gs2310pplusVlanPorts 2 }
gs2310pplusVlanPortsEntry OBJECT-TYPE
SYNTAX GS2310PPLUSVlanPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusVlanPortsPort }
::= { gs2310pplusVlanPortsTable 1 }
GS2310PPLUSVlanPortsEntry ::= SEQUENCE {
gs2310pplusVlanPortsPort Integer32,
gs2310pplusVlanPortsPVID Integer32,
gs2310pplusVlanPortsFrameType INTEGER,
gs2310pplusVlanPortsIngressFilter INTEGER,
gs2310pplusVlanPortsEgressRule INTEGER,
gs2310pplusVlanPortsPortType INTEGER
}
gs2310pplusVlanPortsPort OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusVlanPortsEntry 1 }
gs2310pplusVlanPortsPVID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure PVID.
range: 1-4094,
default: 1. "
::= { gs2310pplusVlanPortsEntry 2 }
gs2310pplusVlanPortsFrameType OBJECT-TYPE
SYNTAX INTEGER { all(0), tagged(1), untagged(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure frame type of switch ports.
0: all,
1: tagged,
2: untagged,
default: all. "
::= { gs2310pplusVlanPortsEntry 3 }
gs2310pplusVlanPortsIngressFilter OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure ingress filtering of switch ports.
0: disable,
1: enable,
default:disable . "
::= { gs2310pplusVlanPortsEntry 4 }
gs2310pplusVlanPortsEgressRule OBJECT-TYPE
SYNTAX INTEGER { access(0), hybrid(1), trunk(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure egress-rule of switch ports.
0: access,
1: hybrid,
2: trunk"
::= { gs2310pplusVlanPortsEntry 5 }
gs2310pplusVlanPortsPortType OBJECT-TYPE
SYNTAX INTEGER { cPort(0), sCustomPort(1), sPort(2), unaware(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure port type of switch ports.
0: c-port,
1: s-custom-port,
2: s-port,
3: unaware.
default: c-port. "
::= { gs2310pplusVlanPortsEntry 6 }
gs2310pplusVlanPrivateVLAN OBJECT IDENTIFIER ::= { gs2310pplusVlan 2 }
gs2310pplusVlanPrivateVLANMembership OBJECT IDENTIFIER ::= { gs2310pplusVlanPrivateVLAN 1 }
gs2310pplusVlanPrivateVLANMembershipCreate OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create a pvlan"
::= { gs2310pplusVlanPrivateVLANMembership 1 }
gs2310pplusVlanPrivateVLANMembershipTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusVlanPrivateVLANMembershipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Private Vlan Configuration. "
::= { gs2310pplusVlanPrivateVLANMembership 2 }
gs2310pplusVlanPrivateVLANMembershipEntry OBJECT-TYPE
SYNTAX Gs2310pplusVlanPrivateVLANMembershipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusVlanPrivateVLANIndex }
::= { gs2310pplusVlanPrivateVLANMembershipTable 1 }
Gs2310pplusVlanPrivateVLANMembershipEntry ::= SEQUENCE {
gs2310pplusVlanPrivateVLANIndex Integer32,
gs2310pplusVlanPrivateVLANID Integer32,
gs2310pplusVlanPrivateVLANMemberships DisplayString,
gs2310pplusVlanPrivateVLANRowStatus INTEGER
}
gs2310pplusVlanPrivateVLANIndex OBJECT-TYPE
SYNTAX Integer32(1..52)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"private VLAN Index. "
::= { gs2310pplusVlanPrivateVLANMembershipEntry 1 }
gs2310pplusVlanPrivateVLANID OBJECT-TYPE
SYNTAX Integer32(1..52)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the ID of this particular private VLAN.
The CreateEntry can be modify, the other entry can't be modify."
::= { gs2310pplusVlanPrivateVLANMembershipEntry 2 }
gs2310pplusVlanPrivateVLANMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To include the ports in a Private VLAN"
::= { gs2310pplusVlanPrivateVLANMembershipEntry 3 }
gs2310pplusVlanPrivateVLANRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2310pplusVlanPrivateVLANMembershipEntry 4 }
gs2310pplusVlanPortIsolationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusVlanPortIsolationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2310pplusVlanPrivateVLAN 2 }
gs2310pplusVlanPortIsolationEntry OBJECT-TYPE
SYNTAX Gs2310pplusVlanPortIsolationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusVlanPortIsolationPort }
::= { gs2310pplusVlanPortIsolationTable 1 }
Gs2310pplusVlanPortIsolationEntry ::= SEQUENCE {
gs2310pplusVlanPortIsolationPort Integer32,
gs2310pplusVlanPortIsolation INTEGER
}
gs2310pplusVlanPortIsolationPort OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusVlanPortIsolationEntry 1 }
gs2310pplusVlanPortIsolation OBJECT-TYPE
SYNTAX INTEGER{ disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2310pplusVlanPortIsolationEntry 2 }
gs2310pplusMACbasedVLAN OBJECT IDENTIFIER ::= { gs2310pplusVlan 3 }
gs2310pplusMACbasedVLANConf OBJECT IDENTIFIER ::= { gs2310pplusMACbasedVLAN 1 }
gs2310pplusMACbasedVLANConfCreate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only) 1 : Create MAC base vlan"
::= { gs2310pplusMACbasedVLANConf 1 }
gs2310pplusMACbasedVLANConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMACbasedVLANConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2310pplusMACbasedVLANConf 2 }
gs2310pplusMACbasedVLANConfEntry OBJECT-TYPE
SYNTAX Gs2310pplusMACbasedVLANConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMACbasedVLANIndex }
::= { gs2310pplusMACbasedVLANConfTable 1 }
Gs2310pplusMACbasedVLANConfEntry ::= SEQUENCE {
gs2310pplusMACbasedVLANIndex Integer32,
gs2310pplusMACbasedVLANMACAddress MacAddress,
gs2310pplusMACbasedVLANID Integer32,
gs2310pplusMACbasedMemberships DisplayString,
gs2310pplusMACbaseRowStatus INTEGER
}
gs2310pplusMACbasedVLANIndex OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN ID. "
::= { gs2310pplusMACbasedVLANConfEntry 1 }
gs2310pplusMACbasedVLANMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address.
The CreateEntry can be modify, the other entry can't be modify."
::= { gs2310pplusMACbasedVLANConfEntry 2 }
gs2310pplusMACbasedVLANID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN ID. "
::= { gs2310pplusMACbasedVLANConfEntry 3 }
gs2310pplusMACbasedMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports are displayed for each MAC-based VLAN entry.
To include the port in a MAC-based VLAN"
::= { gs2310pplusMACbasedVLANConfEntry 4 }
gs2310pplusMACbaseRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2310pplusMACbasedVLANConfEntry 5 }
gs2310pplusIGMPSnooping OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 16 }
gs2310pplusIGMPSnoopingBasic OBJECT IDENTIFIER ::= { gs2310pplusIGMPSnooping 1 }
gs2310pplusIGMPSnoopingEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the Global IGMP Snooping"
::= { gs2310pplusIGMPSnoopingBasic 1 }
gs2310pplusIGMPSnoopingUnregisteredIPMCv4Flooding OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable unregistered IPMCv4 traffic flooding. "
::= { gs2310pplusIGMPSnoopingBasic 2 }
gs2310pplusIGMPSnoopingSSMIPRangeAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range. "
::= { gs2310pplusIGMPSnoopingBasic 3 }
gs2310pplusIGMPSnoopingSSMIPRangeValue OBJECT-TYPE
SYNTAX Integer32(4..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range value. "
::= { gs2310pplusIGMPSnoopingBasic 4 }
gs2310pplusIGMPSnoopingProxyEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IGMP Proxy. This feature can be used to avoid forwarding
unnecessary join and leave messages to the router side. "
::= { gs2310pplusIGMPSnoopingBasic 5 }
gs2310pplusIGMPSnoopingPortRelatedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusIGMPSnoopingPortRelatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure IGMP Snooping Port Related Configuration. "
::= { gs2310pplusIGMPSnoopingBasic 6 }
gs2310pplusIGMPSnoopingPortRelatedEntry OBJECT-TYPE
SYNTAX Gs2310pplusIGMPSnoopingPortRelatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2310pplusIGMPSnoopingPortRelatedTable 1 }
Gs2310pplusIGMPSnoopingPortRelatedEntry ::= SEQUENCE {
gs2310pplusIGMPSnoopingRouterPort INTEGER,
gs2310pplusIGMPSnoopingFastLeave INTEGER,
gs2310pplusIGMPSnoopingThrottling Integer32
}
gs2310pplusIGMPSnoopingRouterPort OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP
querier. If an aggregation member port is selected as a router port, the
whole aggregation will act as a router port. "
::= { gs2310pplusIGMPSnoopingPortRelatedEntry 1 }
gs2310pplusIGMPSnoopingFastLeave OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the fast leave on the port. "
::= { gs2310pplusIGMPSnoopingPortRelatedEntry 2 }
gs2310pplusIGMPSnoopingThrottling OBJECT-TYPE
SYNTAX Integer32(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable to limit the number of multicast groups to which a switch port can belong.
0: unlimited"
::= { gs2310pplusIGMPSnoopingPortRelatedEntry 3 }
gs2310pplusIGMPSnoopingVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusIGMPSnoopingVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure IGMP Snooping Vlan Configuration. "
::= { gs2310pplusIGMPSnooping 2 }
gs2310pplusIGMPSnoopingVLANEntry OBJECT-TYPE
SYNTAX Gs2310pplusIGMPSnoopingVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusIGMPSnoopingVLANID }
::= { gs2310pplusIGMPSnoopingVLANTable 1 }
Gs2310pplusIGMPSnoopingVLANEntry ::= SEQUENCE {
gs2310pplusIGMPSnoopingVLANID Integer32,
gs2310pplusIGMPSnoopingVLANEnable INTEGER,
gs2310pplusIGMPSnoopingVLANIGMPQuerier INTEGER,
gs2310pplusIGMPSnoopingVLANCompatibility INTEGER,
gs2310pplusIGMPSnoopingVLANRV Integer32,
gs2310pplusIGMPSnoopingVLANQI Integer32,
gs2310pplusIGMPSnoopingVLANQRI Integer32,
gs2310pplusIGMPSnoopingVLANLLQI Integer32,
gs2310pplusIGMPSnoopingVLANURI Integer32
}
gs2310pplusIGMPSnoopingVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID of the entry"
::= { gs2310pplusIGMPSnoopingVLANEntry 1 }
gs2310pplusIGMPSnoopingVLANEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the per-VLAN IGMP Snooping. Up to 32 VLANs can be
selected for IGMP Snooping. "
::= { gs2310pplusIGMPSnoopingVLANEntry 2 }
gs2310pplusIGMPSnoopingVLANIGMPQuerier OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the IGMP Querier in the VLAN. "
::= { gs2310pplusIGMPSnoopingVLANEntry 3 }
gs2310pplusIGMPSnoopingVLANCompatibility OBJECT-TYPE
SYNTAX INTEGER { igmpAuto(0), forcedIGMPv1(1), forcedIGMPv2(2), forcedIGMPv3(3), none(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Compatibility is maintained by hosts and routers taking appropriate
actions depending on the versions of IGMP operating on hosts and routers
within a network. The allowed selection is IGMP-Auto, Forced IGMPv1,
Forced IGMPv2, Forced IGMPv3, default compatibility value is IGMP-Auto. "
::= { gs2310pplusIGMPSnoopingVLANEntry 4 }
gs2310pplusIGMPSnoopingVLANRV OBJECT-TYPE
SYNTAX Integer32(-1|1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Robustness Variable. The Robustness Variable allows tuning for the
expected packet loss on a network. The allowed range is 1 to 255, default
robustness variable value is 2. (-1: none)"
::= { gs2310pplusIGMPSnoopingVLANEntry 5 }
gs2310pplusIGMPSnoopingVLANQI OBJECT-TYPE
SYNTAX Integer32(-1|1..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query Interval. The Query Interval is the interval between General
Queries sent by the Querier. The allowed range is 1 to 31744 seconds,
default query interval is 125 seconds. (-1: none)"
::= { gs2310pplusIGMPSnoopingVLANEntry 6 }
gs2310pplusIGMPSnoopingVLANQRI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query Response Interval. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries. The
allowed range is 0 to 31744 in tenths of seconds, default query response
interval is 100 in tenths of seconds (10 seconds). (-1: none)"
::= { gs2310pplusIGMPSnoopingVLANEntry 7 }
gs2310pplusIGMPSnoopingVLANLLQI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLQI (LMQI for IGMP). Last Member Query Interval. The Last Member Query
Time is the time value represented by the Last Member Query Interval,
multiplied by the Last Member Query Count. The allowed range is 0 to
31744 in tenths of seconds, default last member query interval is 10 in
tenths of seconds (1 second). (-1: none)"
::= { gs2310pplusIGMPSnoopingVLANEntry 8 }
gs2310pplusIGMPSnoopingVLANURI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report
interval is 1 second. (-1: none)"
::= { gs2310pplusIGMPSnoopingVLANEntry 9 }
gs2310pplusIGMPSnoopingPortGroupFiltering OBJECT IDENTIFIER ::= { gs2310pplusIGMPSnooping 3 }
gs2310pplusIGMPSnoopingPortGroupFilteringCreate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only) 1 : Create IGMP Snooping Port Group Filtering "
::= { gs2310pplusIGMPSnoopingPortGroupFiltering 1 }
gs2310pplusIGMPSnoopingPortGroupFilteringTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusIGMPSnoopingPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure IGMP Snooping port group filtering. "
::= { gs2310pplusIGMPSnoopingPortGroupFiltering 2 }
gs2310pplusIGMPSnoopingPortGroupFilteringEntry OBJECT-TYPE
SYNTAX Gs2310pplusIGMPSnoopingPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusIGMPSnoopingPortGroupFilteringIndex }
::= { gs2310pplusIGMPSnoopingPortGroupFilteringTable 1 }
Gs2310pplusIGMPSnoopingPortGroupFilteringEntry ::= SEQUENCE {
gs2310pplusIGMPSnoopingPortGroupFilteringIndex Integer32,
gs2310pplusIGMPSnoopingPortGroupFilteringPort Integer32,
gs2310pplusIGMPSnoopingPortGroupFilteringGroups DisplayString,
gs2310pplusIGMPSnoopingPortGroupFilteringRowStatus INTEGER
}
gs2310pplusIGMPSnoopingPortGroupFilteringIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IGMP Snooping Port Group Filtering Configuration Index. "
::= { gs2310pplusIGMPSnoopingPortGroupFilteringEntry 1 }
gs2310pplusIGMPSnoopingPortGroupFilteringPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logical port for the settings. "
::= { gs2310pplusIGMPSnoopingPortGroupFilteringEntry 2 }
gs2310pplusIGMPSnoopingPortGroupFilteringGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Multicast Group that will be filtered. "
::= { gs2310pplusIGMPSnoopingPortGroupFilteringEntry 3 }
gs2310pplusIGMPSnoopingPortGroupFilteringRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2310pplusIGMPSnoopingPortGroupFilteringEntry 4 }
gs2310pplusIGMPSnoopingStatus OBJECT IDENTIFIER ::= { gs2310pplusIGMPSnooping 4 }
gs2310pplusIGMPSnoopingstatisticClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all Statistics counters."
::= { gs2310pplusIGMPSnoopingStatus 1 }
gs2310pplusIGMPSnoopingstatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusIGMPSnoopingstatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2310pplusIGMPSnoopingStatus 2 }
gs2310pplusIGMPSnoopingstatisticEntry OBJECT-TYPE
SYNTAX Gs2310pplusIGMPSnoopingstatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusIGMPSnoopingstatisticVLANID }
::= { gs2310pplusIGMPSnoopingstatisticTable 1 }
Gs2310pplusIGMPSnoopingstatisticEntry ::= SEQUENCE {
gs2310pplusIGMPSnoopingstatisticVLANID Integer32,
gs2310pplusIGMPSnoopingstatisticQuerierVersion DisplayString,
gs2310pplusIGMPSnoopingstatisticHostVersion DisplayString,
gs2310pplusIGMPSnoopingstatisticQuerierStatus DisplayString,
gs2310pplusIGMPSnoopingstatisticQueriesTransmitted Counter32,
gs2310pplusIGMPSnoopingstatisticQueriesReceived Counter32,
gs2310pplusIGMPSnoopingstatisticV1ReportsReceived Counter32,
gs2310pplusIGMPSnoopingstatisticV2ReportsReceived Counter32,
gs2310pplusIGMPSnoopingstatisticV3ReportsReceived Counter32,
gs2310pplusIGMPSnoopingstatisticV2LeavesReceived Counter32
}
gs2310pplusIGMPSnoopingstatisticVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the entry. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 1 }
gs2310pplusIGMPSnoopingstatisticQuerierVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working Querier Version currently. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 2 }
gs2310pplusIGMPSnoopingstatisticHostVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working Host Version currently. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 3 }
gs2310pplusIGMPSnoopingstatisticQuerierStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific
interface is administratively disabled. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 4 }
gs2310pplusIGMPSnoopingstatisticQueriesTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Transmitted Queries. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 5 }
gs2310pplusIGMPSnoopingstatisticQueriesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received Queries. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 6 }
gs2310pplusIGMPSnoopingstatisticV1ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V1 Reports. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 7 }
gs2310pplusIGMPSnoopingstatisticV2ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Reports. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 8 }
gs2310pplusIGMPSnoopingstatisticV3ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V3 Reports. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 9 }
gs2310pplusIGMPSnoopingstatisticV2LeavesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Leaves. "
::= { gs2310pplusIGMPSnoopingstatisticEntry 10 }
gs2310pplusIGMPSnoopingRouterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusIGMPSnoopingRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2310pplusIGMPSnoopingStatus 3 }
gs2310pplusIGMPSnoopingRouterPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusIGMPSnoopingRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2310pplusIGMPSnoopingRouterPortTable 1 }
Gs2310pplusIGMPSnoopingRouterPortEntry ::= SEQUENCE {
gs2310pplusIGMPSnoopingRouterPortStatus DisplayString
}
gs2310pplusIGMPSnoopingRouterPortStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP
querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port. "
::= { gs2310pplusIGMPSnoopingRouterPortEntry 1 }
gs2310pplusIGMPSnoopingGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusIGMPSnoopingGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IGMP Snooping Groups Information . "
::= { gs2310pplusIGMPSnooping 5 }
gs2310pplusIGMPSnoopingGroupsEntry OBJECT-TYPE
SYNTAX Gs2310pplusIGMPSnoopingGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusIGMPSnoopingGroupsIndex }
::= { gs2310pplusIGMPSnoopingGroupsTable 1 }
Gs2310pplusIGMPSnoopingGroupsEntry ::= SEQUENCE {
gs2310pplusIGMPSnoopingGroupsIndex Integer32,
gs2310pplusIGMPSnoopingGroupsVLANID Integer32,
gs2310pplusIGMPSnoopingGroups InetAddress,
gs2310pplusIGMPSnoopingGroupsMemberships DisplayString
}
gs2310pplusIGMPSnoopingGroupsIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IGMP Snooping Groups Index"
::= { gs2310pplusIGMPSnoopingGroupsEntry 1 }
gs2310pplusIGMPSnoopingGroupsVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2310pplusIGMPSnoopingGroupsEntry 2 }
gs2310pplusIGMPSnoopingGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2310pplusIGMPSnoopingGroupsEntry 3 }
gs2310pplusIGMPSnoopingGroupsMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2310pplusIGMPSnoopingGroupsEntry 4 }
gs2310pplusIGMPSnoopingSSMTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusIGMPSnoopingSSMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP SFM (Source-Filtered Multicast) Information Table also contains
the SSM (Source-Specific Multicast) information. This table is sorted
first by VLAN ID, then by group, and then by Port. Different source
addresses belong to the same group are treated as single entry."
::= { gs2310pplusIGMPSnooping 6 }
gs2310pplusIGMPSnoopingSSMEntry OBJECT-TYPE
SYNTAX Gs2310pplusIGMPSnoopingSSMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusIGMPSnoopingSSMIndex }
::= { gs2310pplusIGMPSnoopingSSMTable 1 }
Gs2310pplusIGMPSnoopingSSMEntry ::= SEQUENCE {
gs2310pplusIGMPSnoopingSSMIndex Integer32,
gs2310pplusIGMPSnoopingSSMVLANID Integer32,
gs2310pplusIGMPSnoopingSSMGroup DisplayString,
gs2310pplusIGMPSnoopingSSMPort Integer32,
gs2310pplusIGMPSnoopingSSMMode DisplayString,
gs2310pplusIGMPSnoopingSSMSourceAddress DisplayString,
gs2310pplusIGMPSnoopingSSMType DisplayString
}
gs2310pplusIGMPSnoopingSSMIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IGMP Snooping SSM Index"
::= { gs2310pplusIGMPSnoopingSSMEntry 1 }
gs2310pplusIGMPSnoopingSSMVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2310pplusIGMPSnoopingSSMEntry 2 }
gs2310pplusIGMPSnoopingSSMGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2310pplusIGMPSnoopingSSMEntry 3 }
gs2310pplusIGMPSnoopingSSMPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2310pplusIGMPSnoopingSSMEntry 4 }
gs2310pplusIGMPSnoopingSSMMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the filtering mode maintained per (VLAN ID, port number,
Group Address) basis. It can be either Include or Exclude."
::= { gs2310pplusIGMPSnoopingSSMEntry 5 }
gs2310pplusIGMPSnoopingSSMSourceAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of the source. Currently, system limits the total number of
IP source addresses for filtering to be 128."
::= { gs2310pplusIGMPSnoopingSSMEntry 6 }
gs2310pplusIGMPSnoopingSSMType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Type. It can be either Allow or Deny."
::= { gs2310pplusIGMPSnoopingSSMEntry 7 }
gs2310pplusMLDSnooping OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 17 }
gs2310pplusMLDSnoopingBasic OBJECT IDENTIFIER ::= { gs2310pplusMLDSnooping 1 }
gs2310pplusMLDSnoopingEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the Global MLD Snooping"
::= { gs2310pplusMLDSnoopingBasic 1 }
gs2310pplusMLDSnoopingUnregisteredIPMCv6Flooding OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable unregistered IPMCv6 traffic flooding. "
::= { gs2310pplusMLDSnoopingBasic 2 }
gs2310pplusMLDSnoopingSSMIPRangeAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range. "
::= { gs2310pplusMLDSnoopingBasic 3 }
gs2310pplusMLDSnoopingSSMIPRangeValue OBJECT-TYPE
SYNTAX Integer32(8..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range value. "
::= { gs2310pplusMLDSnoopingBasic 4 }
gs2310pplusMLDSnoopingProxyEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable MLD Proxy. This feature can be used to avoid forwarding
unnecessary join and leave messages to the router side. "
::= { gs2310pplusMLDSnoopingBasic 5 }
gs2310pplusMLDSnoopingPortRelatedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMLDSnoopingPortRelatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MLD Snooping Port Related Configuration. "
::= { gs2310pplusMLDSnoopingBasic 6 }
gs2310pplusMLDSnoopingPortRelatedEntry OBJECT-TYPE
SYNTAX Gs2310pplusMLDSnoopingPortRelatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2310pplusMLDSnoopingPortRelatedTable 1 }
Gs2310pplusMLDSnoopingPortRelatedEntry ::= SEQUENCE {
gs2310pplusMLDSnoopingRouterPort INTEGER,
gs2310pplusMLDSnoopingFastLeave INTEGER,
gs2310pplusMLDSnoopingThrottling Integer32
}
gs2310pplusMLDSnoopingRouterPort OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP
querier. If an aggregation member port is selected as a router port, the
whole aggregation will act as a router port. "
::= { gs2310pplusMLDSnoopingPortRelatedEntry 1 }
gs2310pplusMLDSnoopingFastLeave OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the fast leave on the port. "
::= { gs2310pplusMLDSnoopingPortRelatedEntry 2 }
gs2310pplusMLDSnoopingThrottling OBJECT-TYPE
SYNTAX Integer32(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable to limit the number of multicast groups to which a switch port can belong.
0: unlimited"
::= { gs2310pplusMLDSnoopingPortRelatedEntry 3 }
gs2310pplusMLDSnoopingVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMLDSnoopingVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MLD Snooping Vlan Configuration. "
::= { gs2310pplusMLDSnooping 2 }
gs2310pplusMLDSnoopingVLANEntry OBJECT-TYPE
SYNTAX Gs2310pplusMLDSnoopingVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMLDSnoopingVLANID }
::= { gs2310pplusMLDSnoopingVLANTable 1 }
Gs2310pplusMLDSnoopingVLANEntry ::= SEQUENCE {
gs2310pplusMLDSnoopingVLANID Integer32,
gs2310pplusMLDSnoopingVLANEnable INTEGER,
gs2310pplusMLDSnoopingVLANIGMPQuerier INTEGER,
gs2310pplusMLDSnoopingVLANCompatibility INTEGER,
gs2310pplusMLDSnoopingVLANRV Integer32,
gs2310pplusMLDSnoopingVLANQI Integer32,
gs2310pplusMLDSnoopingVLANQRI Integer32,
gs2310pplusMLDSnoopingVLANLLQI Integer32,
gs2310pplusMLDSnoopingVLANURI Integer32
}
gs2310pplusMLDSnoopingVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID of the entry"
::= { gs2310pplusMLDSnoopingVLANEntry 1 }
gs2310pplusMLDSnoopingVLANEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the per-VLAN MLD Snooping. Up to 32 VLANs can be
selected for MLD Snooping. "
::= { gs2310pplusMLDSnoopingVLANEntry 2 }
gs2310pplusMLDSnoopingVLANIGMPQuerier OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the MLD Querier in the VLAN. "
::= { gs2310pplusMLDSnoopingVLANEntry 3 }
gs2310pplusMLDSnoopingVLANCompatibility OBJECT-TYPE
SYNTAX INTEGER { mldAuto(0), forcedMLDv1(1), forcedMLDv2(2), none(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Compatibility is maintained by hosts and routers taking appropriate
actions depending on the versions of IGMP operating on hosts and routers
within a network. The allowed selection is MLD-Auto, Forced MLDv1,
Forced MLDv2, default compatibility value is IGMP-Auto. "
::= { gs2310pplusMLDSnoopingVLANEntry 4 }
gs2310pplusMLDSnoopingVLANRV OBJECT-TYPE
SYNTAX Integer32(-1|1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Robustness Variable. The Robustness Variable allows tuning for the
expected packet loss on a network. The allowed range is 1 to 255, default
robustness variable value is 2. (-1: none)"
::= { gs2310pplusMLDSnoopingVLANEntry 5 }
gs2310pplusMLDSnoopingVLANQI OBJECT-TYPE
SYNTAX Integer32(-1|1..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query Interval. The Query Interval is the interval between General
Queries sent by the Querier. The allowed range is 1 to 31744 seconds,
default query interval is 125 seconds. (-1: none)"
::= { gs2310pplusMLDSnoopingVLANEntry 6 }
gs2310pplusMLDSnoopingVLANQRI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query Response Interval. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries. The
allowed range is 0 to 31744 in tenths of seconds, default query response
interval is 100 in tenths of seconds (10 seconds). (-1: none)"
::= { gs2310pplusMLDSnoopingVLANEntry 7 }
gs2310pplusMLDSnoopingVLANLLQI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLQI (LMQI for MLD). Last Member Query Interval. The Last Member Query
Time is the time value represented by the Last Member Query Interval,
multiplied by the Last Member Query Count. The allowed range is 0 to
31744 in tenths of seconds, default last member query interval is 10 in
tenths of seconds (1 second). (-1: none)"
::= { gs2310pplusMLDSnoopingVLANEntry 8 }
gs2310pplusMLDSnoopingVLANURI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report
interval is 1 second. (-1: none)"
::= { gs2310pplusMLDSnoopingVLANEntry 9 }
gs2310pplusMLDSnoopingPortGroupFiltering OBJECT IDENTIFIER ::= { gs2310pplusMLDSnooping 3 }
gs2310pplusMLDSnoopingPortGroupFilteringCreate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only) 1 : Create MLD Snooping Port Group Filtering "
::= { gs2310pplusMLDSnoopingPortGroupFiltering 1 }
gs2310pplusMLDSnoopingPortGroupFilteringTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMLDSnoopingPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MLD Snooping port group filtering. "
::= { gs2310pplusMLDSnoopingPortGroupFiltering 2 }
gs2310pplusMLDSnoopingPortGroupFilteringEntry OBJECT-TYPE
SYNTAX Gs2310pplusMLDSnoopingPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMLDSnoopingPortGroupFilteringIndex }
::= { gs2310pplusMLDSnoopingPortGroupFilteringTable 1 }
Gs2310pplusMLDSnoopingPortGroupFilteringEntry ::= SEQUENCE {
gs2310pplusMLDSnoopingPortGroupFilteringIndex Integer32,
gs2310pplusMLDSnoopingPortGroupFilteringPort Integer32,
gs2310pplusMLDSnoopingPortGroupFilteringGroups DisplayString,
gs2310pplusMLDSnoopingPortGroupFilteringRowStatus INTEGER
}
gs2310pplusMLDSnoopingPortGroupFilteringIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MLD Snooping Port Group Filtering Configuration Index. "
::= { gs2310pplusMLDSnoopingPortGroupFilteringEntry 1 }
gs2310pplusMLDSnoopingPortGroupFilteringPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logical port for the settings. "
::= { gs2310pplusMLDSnoopingPortGroupFilteringEntry 2 }
gs2310pplusMLDSnoopingPortGroupFilteringGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Multicast Group that will be filtered. "
::= { gs2310pplusMLDSnoopingPortGroupFilteringEntry 3 }
gs2310pplusMLDSnoopingPortGroupFilteringRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2310pplusMLDSnoopingPortGroupFilteringEntry 4 }
gs2310pplusMLDSnoopingStatus OBJECT IDENTIFIER ::= { gs2310pplusMLDSnooping 4 }
gs2310pplusMLDSnoopingstatisticClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all Statistics counters."
::= { gs2310pplusMLDSnoopingStatus 1 }
gs2310pplusMLDSnoopingstatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMLDSnoopingstatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2310pplusMLDSnoopingStatus 2 }
gs2310pplusMLDSnoopingstatisticEntry OBJECT-TYPE
SYNTAX Gs2310pplusMLDSnoopingstatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMLDSnoopingstatisticVLANID }
::= { gs2310pplusMLDSnoopingstatisticTable 1 }
Gs2310pplusMLDSnoopingstatisticEntry ::= SEQUENCE {
gs2310pplusMLDSnoopingstatisticVLANID Integer32,
gs2310pplusMLDSnoopingstatisticQuerierVersion DisplayString,
gs2310pplusMLDSnoopingstatisticHostVersion DisplayString,
gs2310pplusMLDSnoopingstatisticQuerierStatus DisplayString,
gs2310pplusMLDSnoopingstatisticQueriesTransmitted Counter32,
gs2310pplusMLDSnoopingstatisticQueriesReceived Counter32,
gs2310pplusMLDSnoopingstatisticV1ReportsReceived Counter32,
gs2310pplusMLDSnoopingstatisticV2ReportsReceived Counter32,
gs2310pplusMLDSnoopingstatisticV1LeavesReceived Counter32
}
gs2310pplusMLDSnoopingstatisticVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the entry. "
::= { gs2310pplusMLDSnoopingstatisticEntry 1 }
gs2310pplusMLDSnoopingstatisticQuerierVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working Querier Version currently. "
::= { gs2310pplusMLDSnoopingstatisticEntry 2 }
gs2310pplusMLDSnoopingstatisticHostVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working Host Version currently. "
::= { gs2310pplusMLDSnoopingstatisticEntry 3 }
gs2310pplusMLDSnoopingstatisticQuerierStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific
interface is administratively disabled. "
::= { gs2310pplusMLDSnoopingstatisticEntry 4 }
gs2310pplusMLDSnoopingstatisticQueriesTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Transmitted Queries. "
::= { gs2310pplusMLDSnoopingstatisticEntry 5 }
gs2310pplusMLDSnoopingstatisticQueriesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received Queries. "
::= { gs2310pplusMLDSnoopingstatisticEntry 6 }
gs2310pplusMLDSnoopingstatisticV1ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V1 Reports. "
::= { gs2310pplusMLDSnoopingstatisticEntry 7 }
gs2310pplusMLDSnoopingstatisticV2ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Reports. "
::= { gs2310pplusMLDSnoopingstatisticEntry 8 }
gs2310pplusMLDSnoopingstatisticV1LeavesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V1 Leaves. "
::= { gs2310pplusMLDSnoopingstatisticEntry 9 }
gs2310pplusMLDSnoopingRouterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMLDSnoopingRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2310pplusMLDSnoopingStatus 3 }
gs2310pplusMLDSnoopingRouterPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusMLDSnoopingRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2310pplusMLDSnoopingRouterPortTable 1 }
Gs2310pplusMLDSnoopingRouterPortEntry ::= SEQUENCE {
gs2310pplusMLDSnoopingRouterPortStatus DisplayString
}
gs2310pplusMLDSnoopingRouterPortStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP
querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port. "
::= { gs2310pplusMLDSnoopingRouterPortEntry 1 }
gs2310pplusMLDSnoopingGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMLDSnoopingGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MLD Snooping Groups Information . "
::= { gs2310pplusMLDSnooping 5 }
gs2310pplusMLDSnoopingGroupsEntry OBJECT-TYPE
SYNTAX Gs2310pplusMLDSnoopingGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMLDSnoopingGroupsIndex }
::= { gs2310pplusMLDSnoopingGroupsTable 1 }
Gs2310pplusMLDSnoopingGroupsEntry ::= SEQUENCE {
gs2310pplusMLDSnoopingGroupsIndex Integer32,
gs2310pplusMLDSnoopingGroupsVLANID Integer32,
gs2310pplusMLDSnoopingGroups InetAddress,
gs2310pplusMLDSnoopingGroupsMemberships DisplayString
}
gs2310pplusMLDSnoopingGroupsIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MLD Snooping Groups Index"
::= { gs2310pplusMLDSnoopingGroupsEntry 1 }
gs2310pplusMLDSnoopingGroupsVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2310pplusMLDSnoopingGroupsEntry 2 }
gs2310pplusMLDSnoopingGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2310pplusMLDSnoopingGroupsEntry 3 }
gs2310pplusMLDSnoopingGroupsMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2310pplusMLDSnoopingGroupsEntry 4 }
gs2310pplusMLDSnoopingSSMTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMLDSnoopingSSMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MLD SFM (Source-Filtered Multicast) Information Table also contains
the SSM (Source-Specific Multicast) information. This table is sorted
first by VLAN ID, then by group, and then by Port. Different source
addresses belong to the same group are treated as single entry."
::= { gs2310pplusMLDSnooping 6 }
gs2310pplusMLDSnoopingSSMEntry OBJECT-TYPE
SYNTAX Gs2310pplusMLDSnoopingSSMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMLDSnoopingSSMIndex }
::= { gs2310pplusMLDSnoopingSSMTable 1 }
Gs2310pplusMLDSnoopingSSMEntry ::= SEQUENCE {
gs2310pplusMLDSnoopingSSMIndex Integer32,
gs2310pplusMLDSnoopingSSMVLANID Integer32,
gs2310pplusMLDSnoopingSSMGroup DisplayString,
gs2310pplusMLDSnoopingSSMPort Integer32,
gs2310pplusMLDSnoopingSSMMode DisplayString,
gs2310pplusMLDSnoopingSSMSourceAddress DisplayString,
gs2310pplusMLDSnoopingSSMType DisplayString
}
gs2310pplusMLDSnoopingSSMIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MLD Snooping SSM Index"
::= { gs2310pplusMLDSnoopingSSMEntry 1 }
gs2310pplusMLDSnoopingSSMVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2310pplusMLDSnoopingSSMEntry 2 }
gs2310pplusMLDSnoopingSSMGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2310pplusMLDSnoopingSSMEntry 3 }
gs2310pplusMLDSnoopingSSMPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2310pplusMLDSnoopingSSMEntry 4 }
gs2310pplusMLDSnoopingSSMMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the filtering mode maintained per (VLAN ID, port number,
Group Address) basis. It can be either Include or Exclude."
::= { gs2310pplusMLDSnoopingSSMEntry 5 }
gs2310pplusMLDSnoopingSSMSourceAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of the source. Currently, system limits the total number of
IP source addresses for filtering to be 128."
::= { gs2310pplusMLDSnoopingSSMEntry 6 }
gs2310pplusMLDSnoopingSSMType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Type. It can be either Allow or Deny."
::= { gs2310pplusMLDSnoopingSSMEntry 7 }
gs2310pplusMVR OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 18 }
gs2310pplusMVRConfiguration OBJECT IDENTIFIER ::= { gs2310pplusMVR 1 }
gs2310pplusMVRMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the Global MVR. "
::= { gs2310pplusMVRConfiguration 1 }
gs2310pplusMVRVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the Multicast VLAN ID. "
::= { gs2310pplusMVRConfiguration 2 }
gs2310pplusMVRPortConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMVRPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MVR Port Configuration. "
::= { gs2310pplusMVRConfiguration 3 }
gs2310pplusMVRPortConfigurationEntry OBJECT-TYPE
SYNTAX Gs2310pplusMVRPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2310pplusMVRPortConfigurationTable 1 }
Gs2310pplusMVRPortConfigurationEntry ::= SEQUENCE {
gs2310pplusMVRPortConfigurationMode INTEGER,
gs2310pplusMVRPortConfigurationType INTEGER,
gs2310pplusMVRPortConfigurationImmediateLeave INTEGER
}
gs2310pplusMVRPortConfigurationMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable MVR on the port. "
::= { gs2310pplusMVRPortConfigurationEntry 1 }
gs2310pplusMVRPortConfigurationType OBJECT-TYPE
SYNTAX INTEGER { receiver(0), source(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the MVR port type on the port. "
::= { gs2310pplusMVRPortConfigurationEntry 2 }
gs2310pplusMVRPortConfigurationImmediateLeave OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the fast leave on the port. "
::= { gs2310pplusMVRPortConfigurationEntry 3 }
gs2310pplusMVRPortGroupFiltering OBJECT IDENTIFIER ::= { gs2310pplusMVR 2 }
gs2310pplusMVRPortGroupFilteringCreate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only) 1 : Create MLD Snooping Port Group Filtering "
::= { gs2310pplusMVRPortGroupFiltering 1 }
gs2310pplusMVRPortGroupFilteringTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMVRPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MVR port group filtering. "
::= { gs2310pplusMVRPortGroupFiltering 2 }
gs2310pplusMVRPortGroupFilteringEntry OBJECT-TYPE
SYNTAX Gs2310pplusMVRPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMVRPortGroupFilteringIndex }
::= { gs2310pplusMVRPortGroupFilteringTable 1 }
Gs2310pplusMVRPortGroupFilteringEntry ::= SEQUENCE {
gs2310pplusMVRPortGroupFilteringIndex Integer32,
gs2310pplusMVRPortGroupFilteringPort Integer32,
gs2310pplusMVRPortGroupFilteringStartGroups DisplayString,
gs2310pplusMVRPortGroupFilteringEndGroups DisplayString,
gs2310pplusMVRPortGroupFilteringRowStatus INTEGER
}
gs2310pplusMVRPortGroupFilteringIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR Port Group Filtering Configuration Index. "
::= { gs2310pplusMVRPortGroupFilteringEntry 1 }
gs2310pplusMVRPortGroupFilteringPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logical port for the settings. "
::= { gs2310pplusMVRPortGroupFilteringEntry 2 }
gs2310pplusMVRPortGroupFilteringStartGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Multicast Group that will be allowed. "
::= { gs2310pplusMVRPortGroupFilteringEntry 3 }
gs2310pplusMVRPortGroupFilteringEndGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Multicast Group that will be allowed. "
::= { gs2310pplusMVRPortGroupFilteringEntry 4 }
gs2310pplusMVRPortGroupFilteringRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2310pplusMVRPortGroupFilteringEntry 5 }
gs2310pplusMVRGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMVRGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR Groups Information . "
::= { gs2310pplusMVR 3 }
gs2310pplusMVRGroupsEntry OBJECT-TYPE
SYNTAX Gs2310pplusMVRGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMVRGroupsIndex }
::= { gs2310pplusMVRGroupsTable 1 }
Gs2310pplusMVRGroupsEntry ::= SEQUENCE {
gs2310pplusMVRGroupsIndex Integer32,
gs2310pplusMVRGroupsVLANID Integer32,
gs2310pplusMVRGroups InetAddress,
gs2310pplusMVRGroupsMemberships DisplayString
}
gs2310pplusMVRGroupsIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR Groups Index"
::= { gs2310pplusMVRGroupsEntry 1 }
gs2310pplusMVRGroupsVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2310pplusMVRGroupsEntry 2 }
gs2310pplusMVRGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2310pplusMVRGroupsEntry 3 }
gs2310pplusMVRGroupsMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2310pplusMVRGroupsEntry 4 }
gs2310pplusMVRStatus OBJECT IDENTIFIER ::= { gs2310pplusMVR 4 }
gs2310pplusMVRstatisticClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all Statistics counters."
::= { gs2310pplusMVRStatus 1 }
gs2310pplusMVRstatisticVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the entry. "
::= { gs2310pplusMVRStatus 2 }
gs2310pplusMVRstatisticV1ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V1 Reports. "
::= { gs2310pplusMVRStatus 3 }
gs2310pplusMVRstatisticV2ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Reports. "
::= { gs2310pplusMVRStatus 4 }
gs2310pplusMVRstatisticV3ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V3 Reports. "
::= { gs2310pplusMVRStatus 5 }
gs2310pplusMVRstatisticV2LeavesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Leaves. "
::= { gs2310pplusMVRStatus 6 }
gs2310pplusLACP OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 19 }
gs2310pplusLACPConf OBJECT IDENTIFIER ::= { gs2310pplusLACP 1 }
gs2310pplusLACPPortConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusLACPPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusLACPConf 1 }
gs2310pplusLACPPortConfigurationEntry OBJECT-TYPE
SYNTAX Gs2310pplusLACPPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusLACPPortConfigurationPort }
::= { gs2310pplusLACPPortConfigurationTable 1 }
Gs2310pplusLACPPortConfigurationEntry ::= SEQUENCE {
gs2310pplusLACPPortConfigurationPort Integer32,
gs2310pplusLACPPortConfigurationMode INTEGER,
gs2310pplusLACPPortConfigurationKey Integer32,
gs2310pplusLACPPortConfigurationRole INTEGER
}
gs2310pplusLACPPortConfigurationPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusLACPPortConfigurationEntry 1 }
gs2310pplusLACPPortConfigurationMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable LACP Mode."
::= { gs2310pplusLACPPortConfigurationEntry 2 }
gs2310pplusLACPPortConfigurationKey OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LACP key : 1-65535. 0 : Auto"
::= { gs2310pplusLACPPortConfigurationEntry 3 }
gs2310pplusLACPPortConfigurationRole OBJECT-TYPE
SYNTAX INTEGER { passive(0), active(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 : passive, Listen for LACP packets.
1 : active, Initiate LACP negotiation, and transmit LACP packets each second"
::= { gs2310pplusLACPPortConfigurationEntry 4 }
gs2310pplusLACPSystemStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusLACPSystemStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusLACP 2 }
gs2310pplusLACPSystemStatusEntry OBJECT-TYPE
SYNTAX Gs2310pplusLACPSystemStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusLACPSystemStatusIndex }
::= { gs2310pplusLACPSystemStatusTable 1 }
Gs2310pplusLACPSystemStatusEntry ::= SEQUENCE {
gs2310pplusLACPSystemStatusIndex Integer32,
gs2310pplusLACPSystemStatusAggrID DisplayString,
gs2310pplusLACPSystemStatusPartnerSystemID MacAddress,
gs2310pplusLACPSystemStatusPartnerKey DisplayString,
gs2310pplusLACPSystemStatusLastchanged DisplayString,
gs2310pplusLACPSystemStatusLocalPorts DisplayString
}
gs2310pplusLACPSystemStatusIndex OBJECT-TYPE
SYNTAX Integer32(1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusLACPSystemStatusEntry 1 }
gs2310pplusLACPSystemStatusAggrID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Aggregation ID associated with this aggregation instance."
::= { gs2310pplusLACPSystemStatusEntry 2 }
gs2310pplusLACPSystemStatusPartnerSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system ID (MAC address) of the aggregation partner."
::= { gs2310pplusLACPSystemStatusEntry 3 }
gs2310pplusLACPSystemStatusPartnerKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Key that the partner has assigned to this aggregation ID. "
::= { gs2310pplusLACPSystemStatusEntry 4 }
gs2310pplusLACPSystemStatusLastchanged OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The time since this aggregation changed. "
::= { gs2310pplusLACPSystemStatusEntry 5 }
gs2310pplusLACPSystemStatusLocalPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows which ports are a part of this aggregation for this switch. "
::= { gs2310pplusLACPSystemStatusEntry 6 }
gs2310pplusLACPStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusLACPStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusLACP 3 }
gs2310pplusLACPStatusEntry OBJECT-TYPE
SYNTAX Gs2310pplusLACPStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusLACPStatusPort }
::= { gs2310pplusLACPStatusTable 1 }
Gs2310pplusLACPStatusEntry ::= SEQUENCE {
gs2310pplusLACPStatusPort Integer32,
gs2310pplusLACPStatusLACP DisplayString,
gs2310pplusLACPStatusKey DisplayString,
gs2310pplusLACPStatusAggrID DisplayString,
gs2310pplusLACPStatusPartnerSystemID DisplayString,
gs2310pplusLACPStatusPartnerPort DisplayString
}
gs2310pplusLACPStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusLACPStatusEntry 1 }
gs2310pplusLACPStatusLACP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enabled means that LACP is enabled and the port link is up.
Disabled means that LACP is not enabled or that the port link is down.
Backup means that the port could not join the aggregation group but will join if other port leaves.
Meanwhile it's LACP status is disabled."
::= { gs2310pplusLACPStatusEntry 2 }
gs2310pplusLACPStatusKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The key assigned to this port. Only ports with the same key can aggregate together."
::= { gs2310pplusLACPStatusEntry 3 }
gs2310pplusLACPStatusAggrID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Aggregation ID assigned to this aggregation group. "
::= { gs2310pplusLACPStatusEntry 4 }
gs2310pplusLACPStatusPartnerSystemID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The partner's System ID. "
::= { gs2310pplusLACPStatusEntry 5 }
gs2310pplusLACPStatusPartnerPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The partner's port number connected to this port. "
::= { gs2310pplusLACPStatusEntry 6 }
gs2310pplusLACPStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusLACPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusLACP 4 }
gs2310pplusLACPStatisticsEntry OBJECT-TYPE
SYNTAX Gs2310pplusLACPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusLACPStatisticsPort }
::= { gs2310pplusLACPStatisticsTable 1 }
Gs2310pplusLACPStatisticsEntry ::= SEQUENCE {
gs2310pplusLACPStatisticsPort Integer32,
gs2310pplusLACPReceived Counter32,
gs2310pplusLACPTransmitted Counter32,
gs2310pplusLACPDiscardedUnknown Counter32,
gs2310pplusLACPDiscardedIllegal Counter32
}
gs2310pplusLACPStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusLACPStatisticsEntry 1 }
gs2310pplusLACPReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows how many LACP frames have been received at each port. "
::= { gs2310pplusLACPStatisticsEntry 2 }
gs2310pplusLACPTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows how many LACP frames have been sent from each port. "
::= { gs2310pplusLACPStatisticsEntry 3 }
gs2310pplusLACPDiscardedUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows how many unknown LACP frames have been discarded at each port. "
::= { gs2310pplusLACPStatisticsEntry 4 }
gs2310pplusLACPDiscardedIllegal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows how many illegal LACP frames have been discarded at each port. "
::= { gs2310pplusLACPStatisticsEntry 5 }
gs2310pplusLACPStatisticsClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: clear"
::= { gs2310pplusLACP 5 }
gs2310pplusSTP OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 20 }
gs2310pplusSTPBridgeBasicConf OBJECT IDENTIFIER ::= { gs2310pplusSTP 1 }
gs2310pplusSTPBridgeProtocolVersion OBJECT-TYPE
SYNTAX INTEGER { stp(0), rstp(2), mstp(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 3,
0: stp
2: rstp
3: mstp"
::= { gs2310pplusSTPBridgeBasicConf 1 }
gs2310pplusSTPBridgePriority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP bridge priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2310pplusSTPBridgeBasicConf 2 }
gs2310pplusSTPBridgeForwardDelay OBJECT-TYPE
SYNTAX Integer32(4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Forward Delay default: 15, range: 4 - 30.
MaxAge must be <= (FwdDelay-1)*2."
::= { gs2310pplusSTPBridgeBasicConf 3 }
gs2310pplusSTPBridgeMaxAge OBJECT-TYPE
SYNTAX Integer32(6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Max Age default: 20, range: 6 - 40.
MaxAge must be <= (FwdDelay-1)*2"
::= { gs2310pplusSTPBridgeBasicConf 4 }
gs2310pplusSTPBridgeMaximumHopCount OBJECT-TYPE
SYNTAX Integer32(6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Maximum Hop Count default: 20, range: 6 - 40."
::= { gs2310pplusSTPBridgeBasicConf 5 }
gs2310pplusSTPBridgeTransmitHoldCount OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Transmit Hold Count default: 6, range: 1 - 10."
::= { gs2310pplusSTPBridgeBasicConf 6 }
gs2310pplusSTPBridgeAdvancedConf OBJECT IDENTIFIER ::= { gs2310pplusSTP 2 }
gs2310pplusSTPBridgeEdgePortBPDUFiltering OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPBridgeAdvancedConf 1 }
gs2310pplusSTPBridgeEdgePortBPDUGuard OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPBridgeAdvancedConf 2 }
gs2310pplusSTPBridgePortErrorRecoveryTimeout OBJECT-TYPE
SYNTAX Integer32(0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port Error Recovery Timeout disable: 0, range: 30 - 86400."
::= { gs2310pplusSTPBridgeAdvancedConf 3 }
gs2310pplusSTPMSTIConf OBJECT IDENTIFIER ::= { gs2310pplusSTP 3 }
gs2310pplusSTPMSTIConfigurationName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A text string up to 32 characters long."
::= { gs2310pplusSTPMSTIConf 1 }
gs2310pplusSTPMSTIConfigurationRevision OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configuration Revision default: 0, range: 0 - 65535."
::= { gs2310pplusSTPMSTIConf 2 }
gs2310pplusSTPMSTIMappingConf OBJECT IDENTIFIER ::= { gs2310pplusSTP 4 }
gs2310pplusSTPMSTI1VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI1.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2310pplusSTPMSTIMappingConf 1 }
gs2310pplusSTPMSTI2VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI2.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2310pplusSTPMSTIMappingConf 2 }
gs2310pplusSTPMSTI3VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI3.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2310pplusSTPMSTIMappingConf 3 }
gs2310pplusSTPMSTI4VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI4.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2310pplusSTPMSTIMappingConf 4 }
gs2310pplusSTPMSTI5VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI5.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2310pplusSTPMSTIMappingConf 5 }
gs2310pplusSTPMSTI6VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI6.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2310pplusSTPMSTIMappingConf 6 }
gs2310pplusSTPMSTI7VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI7.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2310pplusSTPMSTIMappingConf 7 }
gs2310pplusSTPMSTIPriority OBJECT IDENTIFIER ::= { gs2310pplusSTP 5 }
gs2310pplusSTPCISTPriority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2310pplusSTPMSTIPriority 1 }
gs2310pplusSTPMSTI1Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2310pplusSTPMSTIPriority 2 }
gs2310pplusSTPMSTI2Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2310pplusSTPMSTIPriority 3 }
gs2310pplusSTPMSTI3Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2310pplusSTPMSTIPriority 4 }
gs2310pplusSTPMSTI4Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2310pplusSTPMSTIPriority 5 }
gs2310pplusSTPMSTI5Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2310pplusSTPMSTIPriority 6 }
gs2310pplusSTPMSTI6Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2310pplusSTPMSTIPriority 7 }
gs2310pplusSTPMSTI7Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2310pplusSTPMSTIPriority 8 }
gs2310pplusSTPCISTPort OBJECT IDENTIFIER ::= { gs2310pplusSTP 6 }
gs2310pplusSTPCISTAggregatedPort OBJECT IDENTIFIER ::= { gs2310pplusSTPCISTPort 1 }
gs2310pplusSTPCISTAggregatedPortSTPEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPCISTAggregatedPort 1 }
gs2310pplusSTPCISTAggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPCISTAggregatedPort 2 }
gs2310pplusSTPCISTAggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPCISTAggregatedPort 3 }
gs2310pplusSTPCISTAggregatedPortAdminEdge OBJECT-TYPE
SYNTAX INTEGER { non-edge(0), edge(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: non-edge
1: edge"
::= { gs2310pplusSTPCISTAggregatedPort 4 }
gs2310pplusSTPCISTAggregatedPortAutoEdge OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 1,
0: disable
1: enable"
::= { gs2310pplusSTPCISTAggregatedPort 5 }
gs2310pplusSTPCISTAggregatedPortRestrictedRole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPCISTAggregatedPort 6 }
gs2310pplusSTPCISTAggregatedPortRestrictedTCN OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPCISTAggregatedPort 7 }
gs2310pplusSTPCISTAggregatedPortBPDUGuard OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPCISTAggregatedPort 8 }
gs2310pplusSTPCISTAggregatedPortPointtoPoint OBJECT-TYPE
SYNTAX INTEGER { forcetrue(0), forcefalse(1), auto(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: Forced True
1: Forced False
2: Auto"
::= { gs2310pplusSTPCISTAggregatedPort 9 }
gs2310pplusSTPCISTNormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPCISTNormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show CIST Normal Port Configurations. "
::= { gs2310pplusSTPCISTPort 2 }
gs2310pplusSTPCISTNormalPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPCISTNormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPCISTNormalPortConfPort }
::= { gs2310pplusSTPCISTNormalPortTable 1 }
Gs2310pplusSTPCISTNormalPortEntry ::= SEQUENCE {
gs2310pplusSTPCISTNormalPortConfPort Integer32,
gs2310pplusSTPCISTNormalPortSTPEnabled INTEGER,
gs2310pplusSTPCISTNormalPortPathCost Integer32,
gs2310pplusSTPCISTNormalPortPriority Integer32,
gs2310pplusSTPCISTNormalPortAdminEdge INTEGER,
gs2310pplusSTPCISTNormalPortAutoEdge INTEGER,
gs2310pplusSTPCISTNormalPortRestrictedRole INTEGER,
gs2310pplusSTPCISTNormalPortRestrictedTCN INTEGER,
gs2310pplusSTPCISTNormalPortBPDUGuard INTEGER,
gs2310pplusSTPCISTNormalPortPointtoPoint INTEGER
}
gs2310pplusSTPCISTNormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPCISTNormalPortEntry 1 }
gs2310pplusSTPCISTNormalPortSTPEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPCISTNormalPortEntry 2 }
gs2310pplusSTPCISTNormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPCISTNormalPortEntry 3 }
gs2310pplusSTPCISTNormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPCISTNormalPortEntry 4 }
gs2310pplusSTPCISTNormalPortAdminEdge OBJECT-TYPE
SYNTAX INTEGER { non-edge(0), edge(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: non-Edge
1: edge"
::= { gs2310pplusSTPCISTNormalPortEntry 5 }
gs2310pplusSTPCISTNormalPortAutoEdge OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 1,
0: disable
1: enable"
::= { gs2310pplusSTPCISTNormalPortEntry 6 }
gs2310pplusSTPCISTNormalPortRestrictedRole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPCISTNormalPortEntry 7 }
gs2310pplusSTPCISTNormalPortRestrictedTCN OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPCISTNormalPortEntry 8 }
gs2310pplusSTPCISTNormalPortBPDUGuard OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2310pplusSTPCISTNormalPortEntry 9 }
gs2310pplusSTPCISTNormalPortPointtoPoint OBJECT-TYPE
SYNTAX INTEGER { forcetrue(0), forcefalse(1), auto(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 2,
0: Forced True
1: Forced False
2: Auto"
::= { gs2310pplusSTPCISTNormalPortEntry 10 }
gs2310pplusSTPMSTIPort OBJECT IDENTIFIER ::= { gs2310pplusSTP 7 }
gs2310pplusSTPMSTI1Port OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTIPort 1 }
gs2310pplusSTPMSTI1AggregatedPort OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTI1Port 1 }
gs2310pplusSTPMSTI1AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI1AggregatedPort 1 }
gs2310pplusSTPMSTI1AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI1AggregatedPort 2 }
gs2310pplusSTPMSTI1NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPMSTI1NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI1 Normal Port Configurations. "
::= { gs2310pplusSTPMSTI1Port 2 }
gs2310pplusSTPMSTI1NormalPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPMSTI1NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPMSTI1NormalPortConfPort }
::= { gs2310pplusSTPMSTI1NormalPortTable 1 }
Gs2310pplusSTPMSTI1NormalPortEntry ::= SEQUENCE {
gs2310pplusSTPMSTI1NormalPortConfPort Integer32,
gs2310pplusSTPMSTI1NormalPortPathCost Integer32,
gs2310pplusSTPMSTI1NormalPortPriority Integer32
}
gs2310pplusSTPMSTI1NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPMSTI1NormalPortEntry 1 }
gs2310pplusSTPMSTI1NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI1NormalPortEntry 2 }
gs2310pplusSTPMSTI1NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI1NormalPortEntry 3 }
gs2310pplusSTPMSTI2Port OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTIPort 2 }
gs2310pplusSTPMSTI2AggregatedPort OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTI2Port 1 }
gs2310pplusSTPMSTI2AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI2AggregatedPort 1 }
gs2310pplusSTPMSTI2AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI2AggregatedPort 2 }
gs2310pplusSTPMSTI2NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPMSTI2NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI2 Normal Port Configurations. "
::= { gs2310pplusSTPMSTI2Port 2 }
gs2310pplusSTPMSTI2NormalPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPMSTI2NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPMSTI2NormalPortConfPort }
::= { gs2310pplusSTPMSTI2NormalPortTable 1 }
Gs2310pplusSTPMSTI2NormalPortEntry ::= SEQUENCE {
gs2310pplusSTPMSTI2NormalPortConfPort Integer32,
gs2310pplusSTPMSTI2NormalPortPathCost Integer32,
gs2310pplusSTPMSTI2NormalPortPriority Integer32
}
gs2310pplusSTPMSTI2NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPMSTI2NormalPortEntry 1 }
gs2310pplusSTPMSTI2NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI2NormalPortEntry 2 }
gs2310pplusSTPMSTI2NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI2NormalPortEntry 3 }
gs2310pplusSTPMSTI3Port OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTIPort 3 }
gs2310pplusSTPMSTI3AggregatedPort OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTI3Port 1 }
gs2310pplusSTPMSTI3AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI3AggregatedPort 1 }
gs2310pplusSTPMSTI3AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI3AggregatedPort 2 }
gs2310pplusSTPMSTI3NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPMSTI3NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI3 Normal Port Configurations. "
::= { gs2310pplusSTPMSTI3Port 2 }
gs2310pplusSTPMSTI3NormalPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPMSTI3NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPMSTI3NormalPortConfPort }
::= { gs2310pplusSTPMSTI3NormalPortTable 1 }
Gs2310pplusSTPMSTI3NormalPortEntry ::= SEQUENCE {
gs2310pplusSTPMSTI3NormalPortConfPort Integer32,
gs2310pplusSTPMSTI3NormalPortPathCost Integer32,
gs2310pplusSTPMSTI3NormalPortPriority Integer32
}
gs2310pplusSTPMSTI3NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPMSTI3NormalPortEntry 1 }
gs2310pplusSTPMSTI3NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI3NormalPortEntry 2 }
gs2310pplusSTPMSTI3NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI3NormalPortEntry 3 }
gs2310pplusSTPMSTI4Port OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTIPort 4 }
gs2310pplusSTPMSTI4AggregatedPort OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTI4Port 1 }
gs2310pplusSTPMSTI4AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI4AggregatedPort 1 }
gs2310pplusSTPMSTI4AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI4AggregatedPort 2 }
gs2310pplusSTPMSTI4NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPMSTI4NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI4 Normal Port Configurations. "
::= { gs2310pplusSTPMSTI4Port 2 }
gs2310pplusSTPMSTI4NormalPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPMSTI4NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPMSTI4NormalPortConfPort }
::= { gs2310pplusSTPMSTI4NormalPortTable 1 }
Gs2310pplusSTPMSTI4NormalPortEntry ::= SEQUENCE {
gs2310pplusSTPMSTI4NormalPortConfPort Integer32,
gs2310pplusSTPMSTI4NormalPortPathCost Integer32,
gs2310pplusSTPMSTI4NormalPortPriority Integer32
}
gs2310pplusSTPMSTI4NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPMSTI4NormalPortEntry 1 }
gs2310pplusSTPMSTI4NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI4NormalPortEntry 2 }
gs2310pplusSTPMSTI4NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI4NormalPortEntry 3 }
gs2310pplusSTPMSTI5Port OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTIPort 5 }
gs2310pplusSTPMSTI5AggregatedPort OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTI5Port 1 }
gs2310pplusSTPMSTI5AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI5AggregatedPort 1 }
gs2310pplusSTPMSTI5AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI5AggregatedPort 2 }
gs2310pplusSTPMSTI5NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPMSTI5NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI5 Normal Port Configurations. "
::= { gs2310pplusSTPMSTI5Port 2 }
gs2310pplusSTPMSTI5NormalPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPMSTI5NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPMSTI5NormalPortConfPort }
::= { gs2310pplusSTPMSTI5NormalPortTable 1 }
Gs2310pplusSTPMSTI5NormalPortEntry ::= SEQUENCE {
gs2310pplusSTPMSTI5NormalPortConfPort Integer32,
gs2310pplusSTPMSTI5NormalPortPathCost Integer32,
gs2310pplusSTPMSTI5NormalPortPriority Integer32
}
gs2310pplusSTPMSTI5NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPMSTI5NormalPortEntry 1 }
gs2310pplusSTPMSTI5NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI5NormalPortEntry 2 }
gs2310pplusSTPMSTI5NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI5NormalPortEntry 3 }
gs2310pplusSTPMSTI6Port OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTIPort 6 }
gs2310pplusSTPMSTI6AggregatedPort OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTI6Port 1 }
gs2310pplusSTPMSTI6AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI6AggregatedPort 1 }
gs2310pplusSTPMSTI6AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI6AggregatedPort 2 }
gs2310pplusSTPMSTI6NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPMSTI6NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI6 Normal Port Configurations. "
::= { gs2310pplusSTPMSTI6Port 2 }
gs2310pplusSTPMSTI6NormalPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPMSTI6NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPMSTI6NormalPortConfPort }
::= { gs2310pplusSTPMSTI6NormalPortTable 1 }
Gs2310pplusSTPMSTI6NormalPortEntry ::= SEQUENCE {
gs2310pplusSTPMSTI6NormalPortConfPort Integer32,
gs2310pplusSTPMSTI6NormalPortPathCost Integer32,
gs2310pplusSTPMSTI6NormalPortPriority Integer32
}
gs2310pplusSTPMSTI6NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPMSTI6NormalPortEntry 1 }
gs2310pplusSTPMSTI6NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI6NormalPortEntry 2 }
gs2310pplusSTPMSTI6NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI6NormalPortEntry 3 }
gs2310pplusSTPMSTI7Port OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTIPort 7 }
gs2310pplusSTPMSTI7AggregatedPort OBJECT IDENTIFIER ::= { gs2310pplusSTPMSTI7Port 1 }
gs2310pplusSTPMSTI7AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI7AggregatedPort 1 }
gs2310pplusSTPMSTI7AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI7AggregatedPort 2 }
gs2310pplusSTPMSTI7NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPMSTI7NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI7 Normal Port Configurations. "
::= { gs2310pplusSTPMSTI7Port 2 }
gs2310pplusSTPMSTI7NormalPortEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPMSTI7NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPMSTI7NormalPortConfPort }
::= { gs2310pplusSTPMSTI7NormalPortTable 1 }
Gs2310pplusSTPMSTI7NormalPortEntry ::= SEQUENCE {
gs2310pplusSTPMSTI7NormalPortConfPort Integer32,
gs2310pplusSTPMSTI7NormalPortPathCost Integer32,
gs2310pplusSTPMSTI7NormalPortPriority Integer32
}
gs2310pplusSTPMSTI7NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPMSTI7NormalPortEntry 1 }
gs2310pplusSTPMSTI7NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2310pplusSTPMSTI7NormalPortEntry 2 }
gs2310pplusSTPMSTI7NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2310pplusSTPMSTI7NormalPortEntry 3 }
gs2310pplusSTPBridgeStatus OBJECT IDENTIFIER ::= { gs2310pplusSTP 8 }
gs2310pplusCISTBridgeSTP OBJECT IDENTIFIER ::= { gs2310pplusSTPBridgeStatus 1 }
gs2310pplusCISTBridgeSTPStatus OBJECT IDENTIFIER ::= { gs2310pplusCISTBridgeSTP 1 }
gs2310pplusCISTBridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2310pplusCISTBridgeSTPStatus 1 }
gs2310pplusCISTBridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2310pplusCISTBridgeSTPStatus 2 }
gs2310pplusCISTRootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2310pplusCISTBridgeSTPStatus 3 }
gs2310pplusCISTRootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2310pplusCISTBridgeSTPStatus 4 }
gs2310pplusCISTRootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2310pplusCISTBridgeSTPStatus 5 }
gs2310pplusCISTRegionalRoot OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected regional root bridge, inside the MSTP region of this bridge."
::= { gs2310pplusCISTBridgeSTPStatus 6 }
gs2310pplusCISTInternalRootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Regional Root Path Cost."
::= { gs2310pplusCISTBridgeSTPStatus 7 }
gs2310pplusCISTTopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2310pplusCISTBridgeSTPStatus 8 }
gs2310pplusCISTTopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2310pplusCISTBridgeSTPStatus 9 }
gs2310pplusCISTTopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2310pplusCISTBridgeSTPStatus 10 }
gs2310pplusCISTPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusCISTPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show CIST Ports and Aggregations State Configurations. "
::= { gs2310pplusCISTBridgeSTP 2 }
gs2310pplusCISTPortStateEntry OBJECT-TYPE
SYNTAX Gs2310pplusCISTPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusCISTPortStateIndex }
::= { gs2310pplusCISTPortStateTable 1 }
Gs2310pplusCISTPortStateEntry ::= SEQUENCE {
gs2310pplusCISTPortStateIndex Integer32,
gs2310pplusCISTPortStatePort DisplayString,
gs2310pplusCISTPortStatePortID DisplayString,
gs2310pplusCISTPortStateRole DisplayString,
gs2310pplusCISTPortStateState DisplayString,
gs2310pplusCISTPortStatePathCost Integer32,
gs2310pplusCISTPortStateEdge DisplayString,
gs2310pplusCISTPortStatePoint2Point DisplayString,
gs2310pplusCISTPortStateUptime DisplayString
}
gs2310pplusCISTPortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2310pplusCISTPortStateEntry 1 }
gs2310pplusCISTPortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2310pplusCISTPortStateEntry 2 }
gs2310pplusCISTPortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2310pplusCISTPortStateEntry 3 }
gs2310pplusCISTPortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2310pplusCISTPortStateEntry 4 }
gs2310pplusCISTPortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2310pplusCISTPortStateEntry 5 }
gs2310pplusCISTPortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2310pplusCISTPortStateEntry 6 }
gs2310pplusCISTPortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2310pplusCISTPortStateEntry 7 }
gs2310pplusCISTPortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2310pplusCISTPortStateEntry 8 }
gs2310pplusCISTPortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2310pplusCISTPortStateEntry 9 }
gs2310pplusMSTI1BridgeSTP OBJECT IDENTIFIER ::= { gs2310pplusSTPBridgeStatus 2 }
gs2310pplusMSTI1BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2310pplusMSTI1BridgeSTP 1 }
gs2310pplusMSTI1BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2310pplusMSTI1BridgeSTPStatus 1 }
gs2310pplusMSTI1BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2310pplusMSTI1BridgeSTPStatus 2 }
gs2310pplusMSTI1RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2310pplusMSTI1BridgeSTPStatus 3 }
gs2310pplusMSTI1RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2310pplusMSTI1BridgeSTPStatus 4 }
gs2310pplusMSTI1RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2310pplusMSTI1BridgeSTPStatus 5 }
gs2310pplusMSTI1TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2310pplusMSTI1BridgeSTPStatus 8 }
gs2310pplusMSTI1TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2310pplusMSTI1BridgeSTPStatus 9 }
gs2310pplusMSTI1TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2310pplusMSTI1BridgeSTPStatus 10 }
gs2310pplusMSTI1PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMSTI1PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI1 Ports and Aggregations State Configurations. "
::= { gs2310pplusMSTI1BridgeSTP 2 }
gs2310pplusMSTI1PortStateEntry OBJECT-TYPE
SYNTAX Gs2310pplusMSTI1PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMSTI1PortStateIndex }
::= { gs2310pplusMSTI1PortStateTable 1 }
Gs2310pplusMSTI1PortStateEntry ::= SEQUENCE {
gs2310pplusMSTI1PortStateIndex Integer32,
gs2310pplusMSTI1PortStatePort DisplayString,
gs2310pplusMSTI1PortStatePortID DisplayString,
gs2310pplusMSTI1PortStateRole DisplayString,
gs2310pplusMSTI1PortStateState DisplayString,
gs2310pplusMSTI1PortStatePathCost Integer32,
gs2310pplusMSTI1PortStateEdge DisplayString,
gs2310pplusMSTI1PortStatePoint2Point DisplayString,
gs2310pplusMSTI1PortStateUptime DisplayString
}
gs2310pplusMSTI1PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2310pplusMSTI1PortStateEntry 1 }
gs2310pplusMSTI1PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2310pplusMSTI1PortStateEntry 2 }
gs2310pplusMSTI1PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2310pplusMSTI1PortStateEntry 3 }
gs2310pplusMSTI1PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2310pplusMSTI1PortStateEntry 4 }
gs2310pplusMSTI1PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2310pplusMSTI1PortStateEntry 5 }
gs2310pplusMSTI1PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2310pplusMSTI1PortStateEntry 6 }
gs2310pplusMSTI1PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2310pplusMSTI1PortStateEntry 7 }
gs2310pplusMSTI1PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2310pplusMSTI1PortStateEntry 8 }
gs2310pplusMSTI1PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2310pplusMSTI1PortStateEntry 9 }
gs2310pplusMSTI2BridgeSTP OBJECT IDENTIFIER ::= { gs2310pplusSTPBridgeStatus 3 }
gs2310pplusMSTI2BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2310pplusMSTI2BridgeSTP 1 }
gs2310pplusMSTI2BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2310pplusMSTI2BridgeSTPStatus 1 }
gs2310pplusMSTI2BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2310pplusMSTI2BridgeSTPStatus 2 }
gs2310pplusMSTI2RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2310pplusMSTI2BridgeSTPStatus 3 }
gs2310pplusMSTI2RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2310pplusMSTI2BridgeSTPStatus 4 }
gs2310pplusMSTI2RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2310pplusMSTI2BridgeSTPStatus 5 }
gs2310pplusMSTI2TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2310pplusMSTI2BridgeSTPStatus 8 }
gs2310pplusMSTI2TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2310pplusMSTI2BridgeSTPStatus 9 }
gs2310pplusMSTI2TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2310pplusMSTI2BridgeSTPStatus 10 }
gs2310pplusMSTI2PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMSTI2PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI2 Ports and Aggregations State Configurations. "
::= { gs2310pplusMSTI2BridgeSTP 2 }
gs2310pplusMSTI2PortStateEntry OBJECT-TYPE
SYNTAX Gs2310pplusMSTI2PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMSTI2PortStateIndex }
::= { gs2310pplusMSTI2PortStateTable 1 }
Gs2310pplusMSTI2PortStateEntry ::= SEQUENCE {
gs2310pplusMSTI2PortStateIndex Integer32,
gs2310pplusMSTI2PortStatePort DisplayString,
gs2310pplusMSTI2PortStatePortID DisplayString,
gs2310pplusMSTI2PortStateRole DisplayString,
gs2310pplusMSTI2PortStateState DisplayString,
gs2310pplusMSTI2PortStatePathCost Integer32,
gs2310pplusMSTI2PortStateEdge DisplayString,
gs2310pplusMSTI2PortStatePoint2Point DisplayString,
gs2310pplusMSTI2PortStateUptime DisplayString
}
gs2310pplusMSTI2PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2310pplusMSTI2PortStateEntry 1 }
gs2310pplusMSTI2PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2310pplusMSTI2PortStateEntry 2 }
gs2310pplusMSTI2PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2310pplusMSTI2PortStateEntry 3 }
gs2310pplusMSTI2PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2310pplusMSTI2PortStateEntry 4 }
gs2310pplusMSTI2PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2310pplusMSTI2PortStateEntry 5 }
gs2310pplusMSTI2PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2310pplusMSTI2PortStateEntry 6 }
gs2310pplusMSTI2PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2310pplusMSTI2PortStateEntry 7 }
gs2310pplusMSTI2PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2310pplusMSTI2PortStateEntry 8 }
gs2310pplusMSTI2PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2310pplusMSTI2PortStateEntry 9 }
gs2310pplusMSTI3BridgeSTP OBJECT IDENTIFIER ::= { gs2310pplusSTPBridgeStatus 4 }
gs2310pplusMSTI3BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2310pplusMSTI3BridgeSTP 1 }
gs2310pplusMSTI3BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2310pplusMSTI3BridgeSTPStatus 1 }
gs2310pplusMSTI3BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2310pplusMSTI3BridgeSTPStatus 2 }
gs2310pplusMSTI3RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2310pplusMSTI3BridgeSTPStatus 3 }
gs2310pplusMSTI3RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2310pplusMSTI3BridgeSTPStatus 4 }
gs2310pplusMSTI3RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2310pplusMSTI3BridgeSTPStatus 5 }
gs2310pplusMSTI3TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2310pplusMSTI3BridgeSTPStatus 8 }
gs2310pplusMSTI3TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2310pplusMSTI3BridgeSTPStatus 9 }
gs2310pplusMSTI3TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2310pplusMSTI3BridgeSTPStatus 10 }
gs2310pplusMSTI3PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMSTI3PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI3 Ports and Aggregations State Configurations. "
::= { gs2310pplusMSTI3BridgeSTP 2 }
gs2310pplusMSTI3PortStateEntry OBJECT-TYPE
SYNTAX Gs2310pplusMSTI3PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMSTI3PortStateIndex }
::= { gs2310pplusMSTI3PortStateTable 1 }
Gs2310pplusMSTI3PortStateEntry ::= SEQUENCE {
gs2310pplusMSTI3PortStateIndex Integer32,
gs2310pplusMSTI3PortStatePort DisplayString,
gs2310pplusMSTI3PortStatePortID DisplayString,
gs2310pplusMSTI3PortStateRole DisplayString,
gs2310pplusMSTI3PortStateState DisplayString,
gs2310pplusMSTI3PortStatePathCost Integer32,
gs2310pplusMSTI3PortStateEdge DisplayString,
gs2310pplusMSTI3PortStatePoint2Point DisplayString,
gs2310pplusMSTI3PortStateUptime DisplayString
}
gs2310pplusMSTI3PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2310pplusMSTI3PortStateEntry 1 }
gs2310pplusMSTI3PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2310pplusMSTI3PortStateEntry 2 }
gs2310pplusMSTI3PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2310pplusMSTI3PortStateEntry 3 }
gs2310pplusMSTI3PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2310pplusMSTI3PortStateEntry 4 }
gs2310pplusMSTI3PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2310pplusMSTI3PortStateEntry 5 }
gs2310pplusMSTI3PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2310pplusMSTI3PortStateEntry 6 }
gs2310pplusMSTI3PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2310pplusMSTI3PortStateEntry 7 }
gs2310pplusMSTI3PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2310pplusMSTI3PortStateEntry 8 }
gs2310pplusMSTI3PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2310pplusMSTI3PortStateEntry 9 }
gs2310pplusMSTI4BridgeSTP OBJECT IDENTIFIER ::= { gs2310pplusSTPBridgeStatus 5 }
gs2310pplusMSTI4BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2310pplusMSTI4BridgeSTP 1 }
gs2310pplusMSTI4BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2310pplusMSTI4BridgeSTPStatus 1 }
gs2310pplusMSTI4BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2310pplusMSTI4BridgeSTPStatus 2 }
gs2310pplusMSTI4RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2310pplusMSTI4BridgeSTPStatus 3 }
gs2310pplusMSTI4RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2310pplusMSTI4BridgeSTPStatus 4 }
gs2310pplusMSTI4RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2310pplusMSTI4BridgeSTPStatus 5 }
gs2310pplusMSTI4TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2310pplusMSTI4BridgeSTPStatus 8 }
gs2310pplusMSTI4TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2310pplusMSTI4BridgeSTPStatus 9 }
gs2310pplusMSTI4TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2310pplusMSTI4BridgeSTPStatus 10 }
gs2310pplusMSTI4PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMSTI4PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI4 Ports and Aggregations State Configurations. "
::= { gs2310pplusMSTI4BridgeSTP 2 }
gs2310pplusMSTI4PortStateEntry OBJECT-TYPE
SYNTAX Gs2310pplusMSTI4PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMSTI4PortStateIndex }
::= { gs2310pplusMSTI4PortStateTable 1 }
Gs2310pplusMSTI4PortStateEntry ::= SEQUENCE {
gs2310pplusMSTI4PortStateIndex Integer32,
gs2310pplusMSTI4PortStatePort DisplayString,
gs2310pplusMSTI4PortStatePortID DisplayString,
gs2310pplusMSTI4PortStateRole DisplayString,
gs2310pplusMSTI4PortStateState DisplayString,
gs2310pplusMSTI4PortStatePathCost Integer32,
gs2310pplusMSTI4PortStateEdge DisplayString,
gs2310pplusMSTI4PortStatePoint2Point DisplayString,
gs2310pplusMSTI4PortStateUptime DisplayString
}
gs2310pplusMSTI4PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2310pplusMSTI4PortStateEntry 1 }
gs2310pplusMSTI4PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2310pplusMSTI4PortStateEntry 2 }
gs2310pplusMSTI4PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2310pplusMSTI4PortStateEntry 3 }
gs2310pplusMSTI4PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2310pplusMSTI4PortStateEntry 4 }
gs2310pplusMSTI4PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2310pplusMSTI4PortStateEntry 5 }
gs2310pplusMSTI4PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2310pplusMSTI4PortStateEntry 6 }
gs2310pplusMSTI4PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2310pplusMSTI4PortStateEntry 7 }
gs2310pplusMSTI4PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2310pplusMSTI4PortStateEntry 8 }
gs2310pplusMSTI4PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2310pplusMSTI4PortStateEntry 9 }
gs2310pplusMSTI5BridgeSTP OBJECT IDENTIFIER ::= { gs2310pplusSTPBridgeStatus 6 }
gs2310pplusMSTI5BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2310pplusMSTI5BridgeSTP 1 }
gs2310pplusMSTI5BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2310pplusMSTI5BridgeSTPStatus 1 }
gs2310pplusMSTI5BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2310pplusMSTI5BridgeSTPStatus 2 }
gs2310pplusMSTI5RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2310pplusMSTI5BridgeSTPStatus 3 }
gs2310pplusMSTI5RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2310pplusMSTI5BridgeSTPStatus 4 }
gs2310pplusMSTI5RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2310pplusMSTI5BridgeSTPStatus 5 }
gs2310pplusMSTI5TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2310pplusMSTI5BridgeSTPStatus 8 }
gs2310pplusMSTI5TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2310pplusMSTI5BridgeSTPStatus 9 }
gs2310pplusMSTI5TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2310pplusMSTI5BridgeSTPStatus 10 }
gs2310pplusMSTI5PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMSTI5PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI5 Ports and Aggregations State Configurations. "
::= { gs2310pplusMSTI5BridgeSTP 2 }
gs2310pplusMSTI5PortStateEntry OBJECT-TYPE
SYNTAX Gs2310pplusMSTI5PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMSTI5PortStateIndex }
::= { gs2310pplusMSTI5PortStateTable 1 }
Gs2310pplusMSTI5PortStateEntry ::= SEQUENCE {
gs2310pplusMSTI5PortStateIndex Integer32,
gs2310pplusMSTI5PortStatePort DisplayString,
gs2310pplusMSTI5PortStatePortID DisplayString,
gs2310pplusMSTI5PortStateRole DisplayString,
gs2310pplusMSTI5PortStateState DisplayString,
gs2310pplusMSTI5PortStatePathCost Integer32,
gs2310pplusMSTI5PortStateEdge DisplayString,
gs2310pplusMSTI5PortStatePoint2Point DisplayString,
gs2310pplusMSTI5PortStateUptime DisplayString
}
gs2310pplusMSTI5PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2310pplusMSTI5PortStateEntry 1 }
gs2310pplusMSTI5PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2310pplusMSTI5PortStateEntry 2 }
gs2310pplusMSTI5PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2310pplusMSTI5PortStateEntry 3 }
gs2310pplusMSTI5PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2310pplusMSTI5PortStateEntry 4 }
gs2310pplusMSTI5PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2310pplusMSTI5PortStateEntry 5 }
gs2310pplusMSTI5PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2310pplusMSTI5PortStateEntry 6 }
gs2310pplusMSTI5PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2310pplusMSTI5PortStateEntry 7 }
gs2310pplusMSTI5PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2310pplusMSTI5PortStateEntry 8 }
gs2310pplusMSTI5PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2310pplusMSTI5PortStateEntry 9 }
gs2310pplusMSTI6BridgeSTP OBJECT IDENTIFIER ::= { gs2310pplusSTPBridgeStatus 7 }
gs2310pplusMSTI6BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2310pplusMSTI6BridgeSTP 1 }
gs2310pplusMSTI6BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2310pplusMSTI6BridgeSTPStatus 1 }
gs2310pplusMSTI6BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2310pplusMSTI6BridgeSTPStatus 2 }
gs2310pplusMSTI6RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2310pplusMSTI6BridgeSTPStatus 3 }
gs2310pplusMSTI6RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2310pplusMSTI6BridgeSTPStatus 4 }
gs2310pplusMSTI6RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2310pplusMSTI6BridgeSTPStatus 5 }
gs2310pplusMSTI6TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2310pplusMSTI6BridgeSTPStatus 8 }
gs2310pplusMSTI6TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2310pplusMSTI6BridgeSTPStatus 9 }
gs2310pplusMSTI6TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2310pplusMSTI6BridgeSTPStatus 10 }
gs2310pplusMSTI6PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMSTI6PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI6 Ports and Aggregations State Configurations. "
::= { gs2310pplusMSTI6BridgeSTP 2 }
gs2310pplusMSTI6PortStateEntry OBJECT-TYPE
SYNTAX Gs2310pplusMSTI6PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMSTI6PortStateIndex }
::= { gs2310pplusMSTI6PortStateTable 1 }
Gs2310pplusMSTI6PortStateEntry ::= SEQUENCE {
gs2310pplusMSTI6PortStateIndex Integer32,
gs2310pplusMSTI6PortStatePort DisplayString,
gs2310pplusMSTI6PortStatePortID DisplayString,
gs2310pplusMSTI6PortStateRole DisplayString,
gs2310pplusMSTI6PortStateState DisplayString,
gs2310pplusMSTI6PortStatePathCost Integer32,
gs2310pplusMSTI6PortStateEdge DisplayString,
gs2310pplusMSTI6PortStatePoint2Point DisplayString,
gs2310pplusMSTI6PortStateUptime DisplayString
}
gs2310pplusMSTI6PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2310pplusMSTI6PortStateEntry 1 }
gs2310pplusMSTI6PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2310pplusMSTI6PortStateEntry 2 }
gs2310pplusMSTI6PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2310pplusMSTI6PortStateEntry 3 }
gs2310pplusMSTI6PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2310pplusMSTI6PortStateEntry 4 }
gs2310pplusMSTI6PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2310pplusMSTI6PortStateEntry 5 }
gs2310pplusMSTI6PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2310pplusMSTI6PortStateEntry 6 }
gs2310pplusMSTI6PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2310pplusMSTI6PortStateEntry 7 }
gs2310pplusMSTI6PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2310pplusMSTI6PortStateEntry 8 }
gs2310pplusMSTI6PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2310pplusMSTI6PortStateEntry 9 }
gs2310pplusMSTI7BridgeSTP OBJECT IDENTIFIER ::= { gs2310pplusSTPBridgeStatus 8 }
gs2310pplusMSTI7BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2310pplusMSTI7BridgeSTP 1 }
gs2310pplusMSTI7BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2310pplusMSTI7BridgeSTPStatus 1 }
gs2310pplusMSTI7BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2310pplusMSTI7BridgeSTPStatus 2 }
gs2310pplusMSTI7RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2310pplusMSTI7BridgeSTPStatus 3 }
gs2310pplusMSTI7RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2310pplusMSTI7BridgeSTPStatus 4 }
gs2310pplusMSTI7RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2310pplusMSTI7BridgeSTPStatus 5 }
gs2310pplusMSTI7TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2310pplusMSTI7BridgeSTPStatus 8 }
gs2310pplusMSTI7TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2310pplusMSTI7BridgeSTPStatus 9 }
gs2310pplusMSTI7TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2310pplusMSTI7BridgeSTPStatus 10 }
gs2310pplusMSTI7PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusMSTI7PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI7 Ports and Aggregations State Configurations. "
::= { gs2310pplusMSTI7BridgeSTP 2 }
gs2310pplusMSTI7PortStateEntry OBJECT-TYPE
SYNTAX Gs2310pplusMSTI7PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusMSTI7PortStateIndex }
::= { gs2310pplusMSTI7PortStateTable 1 }
Gs2310pplusMSTI7PortStateEntry ::= SEQUENCE {
gs2310pplusMSTI7PortStateIndex Integer32,
gs2310pplusMSTI7PortStatePort DisplayString,
gs2310pplusMSTI7PortStatePortID DisplayString,
gs2310pplusMSTI7PortStateRole DisplayString,
gs2310pplusMSTI7PortStateState DisplayString,
gs2310pplusMSTI7PortStatePathCost Integer32,
gs2310pplusMSTI7PortStateEdge DisplayString,
gs2310pplusMSTI7PortStatePoint2Point DisplayString,
gs2310pplusMSTI7PortStateUptime DisplayString
}
gs2310pplusMSTI7PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2310pplusMSTI7PortStateEntry 1 }
gs2310pplusMSTI7PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2310pplusMSTI7PortStateEntry 2 }
gs2310pplusMSTI7PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2310pplusMSTI7PortStateEntry 3 }
gs2310pplusMSTI7PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2310pplusMSTI7PortStateEntry 4 }
gs2310pplusMSTI7PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2310pplusMSTI7PortStateEntry 5 }
gs2310pplusMSTI7PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2310pplusMSTI7PortStateEntry 6 }
gs2310pplusMSTI7PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2310pplusMSTI7PortStateEntry 7 }
gs2310pplusMSTI7PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2310pplusMSTI7PortStateEntry 8 }
gs2310pplusMSTI7PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2310pplusMSTI7PortStateEntry 9 }
gs2310pplusSTPPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show STP Port Status."
::= { gs2310pplusSTP 9 }
gs2310pplusSTPPortStatusEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPPortStatusPort }
::= { gs2310pplusSTPPortStatusTable 1 }
Gs2310pplusSTPPortStatusEntry ::= SEQUENCE {
gs2310pplusSTPPortStatusPort Integer32,
gs2310pplusSTPPortStatusCISTRole DisplayString,
gs2310pplusSTPPortStatusCISTState DisplayString,
gs2310pplusSTPPortStatusUptime DisplayString
}
gs2310pplusSTPPortStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPPortStatusEntry 1 }
gs2310pplusSTPPortStatusCISTRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current STP port role of the CIST port. "
::= { gs2310pplusSTPPortStatusEntry 2 }
gs2310pplusSTPPortStatusCISTState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current STP port state of the CIST port. "
::= { gs2310pplusSTPPortStatusEntry 3 }
gs2310pplusSTPPortStatusUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The time since the bridge port was last initialized. "
::= { gs2310pplusSTPPortStatusEntry 4 }
gs2310pplusSTPPortStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusSTPPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show STP Port Statistics."
::= { gs2310pplusSTP 10 }
gs2310pplusSTPPortStatisticsEntry OBJECT-TYPE
SYNTAX Gs2310pplusSTPPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusSTPStatisticsIndex }
::= { gs2310pplusSTPPortStatisticsTable 1 }
Gs2310pplusSTPPortStatisticsEntry ::= SEQUENCE {
gs2310pplusSTPStatisticsIndex Integer32,
gs2310pplusSTPStatisticsPort DisplayString,
gs2310pplusSTPStatisticsTxMSTP Counter32,
gs2310pplusSTPStatisticsTxRSTP Counter32,
gs2310pplusSTPStatisticsTxSTP Counter32,
gs2310pplusSTPStatisticsTxTCN Counter32,
gs2310pplusSTPStatisticsRxMSTP Counter32,
gs2310pplusSTPStatisticsRxRSTP Counter32,
gs2310pplusSTPStatisticsRxSTP Counter32,
gs2310pplusSTPStatisticsRxTCN Counter32,
gs2310pplusSTPStatisticsDiscardedUnknown Counter32,
gs2310pplusSTPStatisticsDiscardedIllegal Counter32
}
gs2310pplusSTPStatisticsIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2310pplusSTPPortStatisticsEntry 1 }
gs2310pplusSTPStatisticsPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusSTPPortStatisticsEntry 2 }
gs2310pplusSTPStatisticsTxMSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of MSTP Configuration BPDU's received/transmitted on the port."
::= { gs2310pplusSTPPortStatisticsEntry 3 }
gs2310pplusSTPStatisticsTxRSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of RSTP Configuration BPDU's received/transmitted on the port. "
::= { gs2310pplusSTPPortStatisticsEntry 4 }
gs2310pplusSTPStatisticsTxSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of legacy STP Configuration BPDU's received/transmitted on the port. "
::= { gs2310pplusSTPPortStatisticsEntry 5 }
gs2310pplusSTPStatisticsTxTCN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of Topology Change Notification BPDU's received/transmitted on the port. "
::= { gs2310pplusSTPPortStatisticsEntry 6 }
gs2310pplusSTPStatisticsRxMSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of MSTP Configuration BPDU's received/transmitted on the port."
::= { gs2310pplusSTPPortStatisticsEntry 7 }
gs2310pplusSTPStatisticsRxRSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of RSTP Configuration BPDU's received/transmitted on the port. "
::= { gs2310pplusSTPPortStatisticsEntry 8 }
gs2310pplusSTPStatisticsRxSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of legacy STP Configuration BPDU's received/transmitted on the port. "
::= { gs2310pplusSTPPortStatisticsEntry 9 }
gs2310pplusSTPStatisticsRxTCN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of Topology Change Notification BPDU's received/transmitted on the port. "
::= { gs2310pplusSTPPortStatisticsEntry 10 }
gs2310pplusSTPStatisticsDiscardedUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of unknown Spanning Tree BPDU's received and discarded on the port. "
::= { gs2310pplusSTPPortStatisticsEntry 11 }
gs2310pplusSTPStatisticsDiscardedIllegal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of illegal Spanning Tree BPDU's received and discarded on the port. "
::= { gs2310pplusSTPPortStatisticsEntry 12 }
gs2310pplusFilteringDataBase OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 21 }
gs2310pplusFilteringDataBaseConfig OBJECT IDENTIFIER ::= { gs2310pplusFilteringDataBase 1 }
gs2310pplusFilteringDataBaseAgingTime OBJECT-TYPE
SYNTAX Integer32(0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure aging time by entering a value here in seconds.
default: 300,
range: 10-1000000.
Disable automatic aging : 0."
::= { gs2310pplusFilteringDataBaseConfig 1 }
gs2310pplusFilteringDataBaseConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSFilteringDataBaseConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusFilteringDataBaseConfig 2 }
gs2310pplusFilteringDataBaseConfigEntry OBJECT-TYPE
SYNTAX GS2310PPLUSFilteringDataBaseConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusFilteringDataBaseConfigPort }
::= { gs2310pplusFilteringDataBaseConfigTable 1 }
GS2310PPLUSFilteringDataBaseConfigEntry ::= SEQUENCE {
gs2310pplusFilteringDataBaseConfigPort Integer32,
gs2310pplusFilteringDataBaseConfigLearning INTEGER
}
gs2310pplusFilteringDataBaseConfigPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusFilteringDataBaseConfigEntry 1 }
gs2310pplusFilteringDataBaseConfigLearning OBJECT-TYPE
SYNTAX INTEGER { auto(0), disable(1), secure(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure learning mode of switch ports.
default: 0,
0: auto,
1: disable,
2: secure. "
::= { gs2310pplusFilteringDataBaseConfigEntry 2 }
gs2310pplusFilteringDataBaseStaticMAC OBJECT IDENTIFIER ::= { gs2310pplusFilteringDataBaseConfig 3 }
gs2310pplusFilteringDataBaseStaticMACCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create Static MAC Table"
::= { gs2310pplusFilteringDataBaseStaticMAC 1 }
gs2310pplusFilteringDataBaseStaticMACTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSFilteringDataBaseStaticMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusFilteringDataBaseStaticMAC 2 }
gs2310pplusFilteringDataBaseStaticMACEntry OBJECT-TYPE
SYNTAX GS2310PPLUSFilteringDataBaseStaticMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusFilteringDataBaseStaticMACIndex }
::= { gs2310pplusFilteringDataBaseStaticMACTable 1 }
GS2310PPLUSFilteringDataBaseStaticMACEntry ::= SEQUENCE {
gs2310pplusFilteringDataBaseStaticMACIndex Integer32,
gs2310pplusFilteringDataBaseStaticMACVLANId Integer32,
gs2310pplusFilteringDataBaseStaticMACAddress MacAddress,
gs2310pplusFilteringDataBaseStaticMACPortMembers DisplayString,
gs2310pplusFilteringDataBaseStaticMACRowStatus INTEGER
}
gs2310pplusFilteringDataBaseStaticMACIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusFilteringDataBaseStaticMACEntry 1 }
gs2310pplusFilteringDataBaseStaticMACVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" VLAN ID, range: 1 - 4094. "
::= { gs2310pplusFilteringDataBaseStaticMACEntry 2 }
gs2310pplusFilteringDataBaseStaticMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" MAC address, format 0a 1b 2c 3d 4e 5f "
::= { gs2310pplusFilteringDataBaseStaticMACEntry 3 }
gs2310pplusFilteringDataBaseStaticMACPortMembers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To include the ports in a Static MAC Table"
::= { gs2310pplusFilteringDataBaseStaticMACEntry 4 }
gs2310pplusFilteringDataBaseStaticMACRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2310pplusFilteringDataBaseStaticMACEntry 5 }
gs2310pplusFilteringDataBaseDynamicMACTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSFilteringDataBaseDynamicMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusFilteringDataBaseConfig 4 }
gs2310pplusFilteringDataBaseDynamicMACEntry OBJECT-TYPE
SYNTAX GS2310PPLUSFilteringDataBaseDynamicMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusFilteringDataBaseDynamicMACIndex }
::= { gs2310pplusFilteringDataBaseDynamicMACTable 1 }
GS2310PPLUSFilteringDataBaseDynamicMACEntry ::= SEQUENCE {
gs2310pplusFilteringDataBaseDynamicMACIndex Integer32,
gs2310pplusFilteringDataBaseDynamicMACType INTEGER,
gs2310pplusFilteringDataBaseDynamicMACVLAN Integer32,
gs2310pplusFilteringDataBaseDynamicMACAddress MacAddress,
gs2310pplusFilteringDataBaseDynamicPortMembers DisplayString
}
gs2310pplusFilteringDataBaseDynamicMACIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusFilteringDataBaseDynamicMACEntry 1 }
gs2310pplusFilteringDataBaseDynamicMACType OBJECT-TYPE
SYNTAX INTEGER { dynamic(0), static(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the entry is a static or a dynamic entry."
::= { gs2310pplusFilteringDataBaseDynamicMACEntry 2 }
gs2310pplusFilteringDataBaseDynamicMACVLAN OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the entry."
::= { gs2310pplusFilteringDataBaseDynamicMACEntry 3 }
gs2310pplusFilteringDataBaseDynamicMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the entry."
::= { gs2310pplusFilteringDataBaseDynamicMACEntry 4 }
gs2310pplusFilteringDataBaseDynamicPortMembers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that are members of the entry."
::= { gs2310pplusFilteringDataBaseDynamicMACEntry 5 }
gs2310pplusSFlowAgent OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 22 }
gs2310pplusSFlowAgentCollector OBJECT IDENTIFIER ::= { gs2310pplusSFlowAgent 1 }
gs2310pplusSFlowAgentReceiverMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusSFlowAgentCollector 1 }
gs2310pplusLMC OBJECT IDENTIFIER ::= { gs2310pplusConfiguration 1500 }
gs2310pplusLMCOperating OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1), try(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: disabled
1: enabled
2: try"
::= { gs2310pplusLMC 1 }
gs2310pplusLMCConfigViaDhcp OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: disabled
1: enabled"
::= { gs2310pplusLMC 2 }
gs2310pplusLMCDomain OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: disabled
1: enabled"
::= { gs2310pplusLMC 3 }
gs2310pplusLMCDhcpClientAutoRenew OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: disabled
1: enabled"
::= { gs2310pplusLMC 4 }
gs2310pplusLMCZeroTouchSupport OBJECT-TYPE
SYNTAX INTEGER { No(0), Yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: No
1: Yes"
::= { gs2310pplusLMC 50 }
gs2310pplusLMCPairingTokenPresent OBJECT-TYPE
SYNTAX INTEGER { No(0), Yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: No
1: Yes"
::= { gs2310pplusLMC 51 }
gs2310pplusLMCClientStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusLMC 52 }
gs2310pplusLMCManagementStatus OBJECT-TYPE
SYNTAX INTEGER {Unpaired(0), Paired(1), PairedAndClaimed(14)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: Unpaired
1: Paired
14: PairedAndClaimed"
::= { gs2310pplusLMC 53 }
gs2310pplusLMCControlStatus OBJECT-TYPE
SYNTAX INTEGER {Disabled(2), Operating(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"2: Disabled
4: Operating"
::= { gs2310pplusLMC 54 }
gs2310pplusLMCMonitoringStatus OBJECT-TYPE
SYNTAX INTEGER {Disabled(2), Operating(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"2: Disabled
4: Operating"
::= { gs2310pplusLMC 55 }
gs2310pplusLMCConfigurationSource OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusLMC 56 }
gs2310pplusLMCConfigModified OBJECT-TYPE
SYNTAX INTEGER { No(0), Yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: No
1: Yes"
::= { gs2310pplusLMC 57 }
gs2310pplusLMCDeviceID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusLMC 58 }
gs2310pplusLMCRoundTripTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusLMC 100 }
----------------------------------------------------------------------------------------------------------------------------
gs2310pplusSecurity OBJECT IDENTIFIER ::= { lancomGS2310PPLUS 3 }
gs2310pplusIPSourceGuard OBJECT IDENTIFIER ::= { gs2310pplusSecurity 1 }
gs2310pplusIPSourceGuardConf OBJECT IDENTIFIER ::= { gs2310pplusIPSourceGuard 1 }
gs2310pplusIPSourceGuardMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0
0: disable
1: enable"
::= { gs2310pplusIPSourceGuardConf 1 }
gs2310pplusIPSourceGuardPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSIPSourceGuardPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuardConf 2 }
gs2310pplusIPSourceGuardPortConfigEntry OBJECT-TYPE
SYNTAX GS2310PPLUSIPSourceGuardPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusIPSourceGuardPortConfigPort }
::= { gs2310pplusIPSourceGuardPortConfigTable 1 }
GS2310PPLUSIPSourceGuardPortConfigEntry ::= SEQUENCE {
gs2310pplusIPSourceGuardPortConfigPort Integer32,
gs2310pplusIPSourceGuardPortConfigMode INTEGER,
gs2310pplusIPSourceGuardPortMaxDynamicClients Integer32
}
gs2310pplusIPSourceGuardPortConfigPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuardPortConfigEntry 1 }
gs2310pplusIPSourceGuardPortConfigMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2310pplusIPSourceGuardPortConfigEntry 2 }
gs2310pplusIPSourceGuardPortMaxDynamicClients OBJECT-TYPE
SYNTAX Integer32(0..2|99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 99
0~2: Max Dynamic clients
99:Unlimited "
::= { gs2310pplusIPSourceGuardPortConfigEntry 3 }
gs2310pplusIPSourceGuardStatic OBJECT IDENTIFIER ::= { gs2310pplusIPSourceGuard 2 }
gs2310pplusIPSourceGuardStaticCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create a IP Source Guard"
::= { gs2310pplusIPSourceGuardStatic 1 }
gs2310pplusIPSourceGuardStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSIPSourceGuardStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuardStatic 2 }
gs2310pplusIPSourceGuardStaticEntry OBJECT-TYPE
SYNTAX GS2310PPLUSIPSourceGuardStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusIPSourceGuardStaticIndex }
::= { gs2310pplusIPSourceGuardStaticTable 1 }
GS2310PPLUSIPSourceGuardStaticEntry ::= SEQUENCE {
gs2310pplusIPSourceGuardStaticIndex Integer32,
gs2310pplusIPSourceGuardStaticPort Integer32,
gs2310pplusIPSourceGuardStaticVLANId Integer32,
gs2310pplusIPSourceGuardStaticIPAddress IpAddress,
gs2310pplusIPSourceGuardStaticMACAddress MacAddress,
gs2310pplusIPSourceGuardStaticRowStatus INTEGER
}
gs2310pplusIPSourceGuardStaticIndex OBJECT-TYPE
SYNTAX Integer32(1..28)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuardStaticEntry 1 }
gs2310pplusIPSourceGuardStaticPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 1 - port number. "
::= { gs2310pplusIPSourceGuardStaticEntry 2 }
gs2310pplusIPSourceGuardStaticVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" VLAN ID, range: 1 - 4094. "
::= { gs2310pplusIPSourceGuardStaticEntry 3 }
gs2310pplusIPSourceGuardStaticIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP address allowed for doing IP source guard. "
::= { gs2310pplusIPSourceGuardStaticEntry 4 }
gs2310pplusIPSourceGuardStaticMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Allowed Source MAC address, format 0a 1b 2c 3d 4e 5f "
::= { gs2310pplusIPSourceGuardStaticEntry 5 }
gs2310pplusIPSourceGuardStaticRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2310pplusIPSourceGuardStaticEntry 6 }
gs2310pplusIPSourceGuardDynamicTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSIPSourceGuardDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuard 3 }
gs2310pplusIPSourceGuardDynamicEntry OBJECT-TYPE
SYNTAX GS2310PPLUSIPSourceGuardDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusIPSourceGuardDynamicIndex }
::= { gs2310pplusIPSourceGuardDynamicTable 1 }
GS2310PPLUSIPSourceGuardDynamicEntry ::= SEQUENCE {
gs2310pplusIPSourceGuardDynamicIndex Integer32,
gs2310pplusIPSourceGuardDynamicPort Integer32,
gs2310pplusIPSourceGuardDynamicVLANId Integer32,
gs2310pplusIPSourceGuardDynamicIPAddress IpAddress,
gs2310pplusIPSourceGuardDynamicMACAddress MacAddress
}
gs2310pplusIPSourceGuardDynamicIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuardDynamicEntry 1 }
gs2310pplusIPSourceGuardDynamicPort OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuardDynamicEntry 2 }
gs2310pplusIPSourceGuardDynamicVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuardDynamicEntry 3 }
gs2310pplusIPSourceGuardDynamicIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuardDynamicEntry 4 }
gs2310pplusIPSourceGuardDynamicMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusIPSourceGuardDynamicEntry 5 }
gs2310pplusARPInspection OBJECT IDENTIFIER ::= { gs2310pplusSecurity 2 }
gs2310pplusARPInspectionConf OBJECT IDENTIFIER ::= { gs2310pplusARPInspection 1 }
gs2310pplusARPInspectionConfMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2310pplusARPInspectionConf 1 }
gs2310pplusARPInspectionConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSARPInspectionConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusARPInspectionConf 2 }
gs2310pplusARPInspectionConfEntry OBJECT-TYPE
SYNTAX GS2310PPLUSARPInspectionConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusARPInspectionConfPortIndex }
::= { gs2310pplusARPInspectionConfTable 1 }
GS2310PPLUSARPInspectionConfEntry ::= SEQUENCE {
gs2310pplusARPInspectionConfPortIndex Integer32,
gs2310pplusARPInspectionConfPortMode INTEGER
}
gs2310pplusARPInspectionConfPortIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusARPInspectionConfEntry 1 }
gs2310pplusARPInspectionConfPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2310pplusARPInspectionConfEntry 2 }
gs2310pplusARPInspectionStatic OBJECT IDENTIFIER ::= { gs2310pplusARPInspection 2 }
gs2310pplusARPInspectionStaticCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: create"
::= { gs2310pplusARPInspectionStatic 1 }
gs2310pplusARPInspectionStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSARPInspectionStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusARPInspectionStatic 2 }
gs2310pplusARPInspectionStaticEntry OBJECT-TYPE
SYNTAX GS2310PPLUSARPInspectionStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusARPInspectionStaticIndex }
::= { gs2310pplusARPInspectionStaticTable 1 }
GS2310PPLUSARPInspectionStaticEntry ::= SEQUENCE {
gs2310pplusARPInspectionStaticIndex Integer32,
gs2310pplusARPInspectionStaticPort Integer32,
gs2310pplusARPInspectionStaticVLANId Integer32,
gs2310pplusARPInspectionStaticIPAddress IpAddress,
gs2310pplusARPInspectionStaticMACAddress MacAddress,
gs2310pplusARPInspectionStaticRowStatus INTEGER
}
gs2310pplusARPInspectionStaticIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2310pplusARPInspectionStaticEntry 1 }
gs2310pplusARPInspectionStaticPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 1 - port number. "
::= { gs2310pplusARPInspectionStaticEntry 2 }
gs2310pplusARPInspectionStaticVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" VLAN ID, range: 1 - 4094. "
::= { gs2310pplusARPInspectionStaticEntry 3 }
gs2310pplusARPInspectionStaticIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP address allowed for doing ARP request. "
::= { gs2310pplusARPInspectionStaticEntry 4 }
gs2310pplusARPInspectionStaticMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Allowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f "
::= { gs2310pplusARPInspectionStaticEntry 5 }
gs2310pplusARPInspectionStaticRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2310pplusARPInspectionStaticEntry 6 }
gs2310pplusARPInspectionDynamicTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSARPInspectionDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusARPInspection 3 }
gs2310pplusARPInspectionDynamicEntry OBJECT-TYPE
SYNTAX GS2310PPLUSARPInspectionDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusARPInspectionDynamicIndex }
::= { gs2310pplusARPInspectionDynamicTable 1 }
GS2310PPLUSARPInspectionDynamicEntry ::= SEQUENCE {
gs2310pplusARPInspectionDynamicIndex Integer32,
gs2310pplusARPInspectionDynamicPort Integer32,
gs2310pplusARPInspectionDynamicVLANId Integer32,
gs2310pplusARPInspectionDynamicIPAddress IpAddress,
gs2310pplusARPInspectionDynamicMACAddress MacAddress
}
gs2310pplusARPInspectionDynamicIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusARPInspectionDynamicEntry 1 }
gs2310pplusARPInspectionDynamicPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusARPInspectionDynamicEntry 2 }
gs2310pplusARPInspectionDynamicVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusARPInspectionDynamicEntry 3 }
gs2310pplusARPInspectionDynamicIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusARPInspectionDynamicEntry 4 }
gs2310pplusARPInspectionDynamicMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusARPInspectionDynamicEntry 5 }
gs2310pplusARPStaticGatewayCtrl OBJECT IDENTIFIER ::= { gs2310pplusARPInspection 6 }
gs2310pplusARPStaticGatewayCtrlSystemConf OBJECT IDENTIFIER ::= { gs2310pplusARPStaticGatewayCtrl 1 }
gs2310pplusARPStaticGatewayCtrlMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusARPStaticGatewayCtrlSystemConf 1 }
gs2310pplusARPStaticGatewayCtrlCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: create"
::= { gs2310pplusARPStaticGatewayCtrl 2 }
gs2310pplusARPStaticGatewayCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSARPStaticGatewayCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusARPStaticGatewayCtrl 3 }
gs2310pplusARPStaticGatewayCtrlEntry OBJECT-TYPE
SYNTAX GS2310PPLUSARPStaticGatewayCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusARPStaticGatewayCtrlIndex }
::= { gs2310pplusARPStaticGatewayCtrlTable 1 }
GS2310PPLUSARPStaticGatewayCtrlEntry ::= SEQUENCE {
gs2310pplusARPStaticGatewayCtrlIndex Integer32,
gs2310pplusARPStaticGatewayCtrlIPAddress IpAddress,
gs2310pplusARPStaticGatewayCtrlMACAddress MacAddress,
gs2310pplusARPStaticGatewayCtrlPort Integer32,
gs2310pplusARPStaticGatewayCtrlAction INTEGER,
gs2310pplusARPStaticGatewayCtrlState DisplayString,
gs2310pplusARPStaticGatewayCtrlReOpen INTEGER,
gs2310pplusARPStaticGatewayCtrlRowStatus INTEGER
}
gs2310pplusARPStaticGatewayCtrlIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2310pplusARPStaticGatewayCtrlEntry 1 }
gs2310pplusARPStaticGatewayCtrlIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source IP address. "
::= { gs2310pplusARPStaticGatewayCtrlEntry 2 }
gs2310pplusARPStaticGatewayCtrlMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source MAC address , format 0a 1b 2c 3d 4e 5f "
::= { gs2310pplusARPStaticGatewayCtrlEntry 3 }
gs2310pplusARPStaticGatewayCtrlPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 1 - port number. "
::= { gs2310pplusARPStaticGatewayCtrlEntry 4 }
gs2310pplusARPStaticGatewayCtrlAction OBJECT-TYPE
SYNTAX INTEGER {none(0),trap(1),dropAndTrap(2), shutdown(3), trapAndShutdown(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: trap
2: drop&trap
3: shutdown
4: trap&shutdown"
::= { gs2310pplusARPStaticGatewayCtrlEntry 5 }
gs2310pplusARPStaticGatewayCtrlState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusARPStaticGatewayCtrlEntry 6 }
gs2310pplusARPStaticGatewayCtrlReOpen OBJECT-TYPE
SYNTAX INTEGER { none(0), reopen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: reopen"
::= { gs2310pplusARPStaticGatewayCtrlEntry 7 }
gs2310pplusARPStaticGatewayCtrlRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2310pplusARPStaticGatewayCtrlEntry 8 }
gs2310pplusARPSpoofingPrevention OBJECT IDENTIFIER ::= { gs2310pplusARPInspection 7 }
gs2310pplusARPSpoofingPreventionSystemConf OBJECT IDENTIFIER ::= { gs2310pplusARPSpoofingPrevention 1 }
gs2310pplusARPSpoofingPreventionMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusARPSpoofingPreventionSystemConf 1 }
gs2310pplusARPSpoofingPreventionTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSARPSpoofingPreventionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusARPSpoofingPrevention 2 }
gs2310pplusARPSpoofingPreventionEntry OBJECT-TYPE
SYNTAX GS2310PPLUSARPSpoofingPreventionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusARPSpoofingPreventionPort }
::= { gs2310pplusARPSpoofingPreventionTable 1 }
GS2310PPLUSARPSpoofingPreventionEntry ::= SEQUENCE {
gs2310pplusARPSpoofingPreventionPort Integer32,
gs2310pplusARPSpoofingPreventionPortMode INTEGER,
gs2310pplusARPSpoofingPreventionPortLimit Integer32,
gs2310pplusARPSpoofingPreventionPortAction INTEGER,
gs2310pplusARPSpoofingPreventionPortState DisplayString,
gs2310pplusARPSpoofingPreventionPortReOpen INTEGER
}
gs2310pplusARPSpoofingPreventionPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusARPSpoofingPreventionEntry 1 }
gs2310pplusARPSpoofingPreventionPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2310pplusARPSpoofingPreventionEntry 2 }
gs2310pplusARPSpoofingPreventionPortLimit OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1, range: 1-100"
::= { gs2310pplusARPSpoofingPreventionEntry 3 }
gs2310pplusARPSpoofingPreventionPortAction OBJECT-TYPE
SYNTAX INTEGER { none(0), trap(1), dropAndTrap(2), shutdown(3), trapAndShutdown(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: trap
2: drop&trap
3: shutdown
4: trap&shutdown"
::= { gs2310pplusARPSpoofingPreventionEntry 4 }
gs2310pplusARPSpoofingPreventionPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusARPSpoofingPreventionEntry 5 }
gs2310pplusARPSpoofingPreventionPortReOpen OBJECT-TYPE
SYNTAX INTEGER { none(0), reopen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: reopen"
::= { gs2310pplusARPSpoofingPreventionEntry 6 }
gs2310pplusARPIPDoSPrevention OBJECT IDENTIFIER ::= { gs2310pplusARPInspection 8 }
gs2310pplusARPIPDoSPreventionTCPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusARPIPDoSPrevention 1 }
gs2310pplusARPIPDoSPreventionUDPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusARPIPDoSPrevention 2 }
gs2310pplusARPIPDoSPreventionICMPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusARPIPDoSPrevention 3 }
gs2310pplusARPIPDoSPreventionServerPort1 OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 0 - port number. 0: none. "
::= { gs2310pplusARPIPDoSPrevention 4 }
gs2310pplusARPIPDoSPreventionServerPort2 OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 0 - port number. 0: none. "
::= { gs2310pplusARPIPDoSPrevention 5 }
gs2310pplusARPIPDoSPreventionServerPort3 OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 0 - port number. 0: none. "
::= { gs2310pplusARPIPDoSPrevention 6 }
gs2310pplusARPIPDoSPreventionServerPort4 OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 0 - port number. 0: none. "
::= { gs2310pplusARPIPDoSPrevention 7 }
gs2310pplusDHCPSnooping OBJECT IDENTIFIER ::= { gs2310pplusSecurity 3 }
gs2310pplusDHCPSnoopingConf OBJECT IDENTIFIER ::= { gs2310pplusDHCPSnooping 1 }
gs2310pplusDHCPSnoopingMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2310pplusDHCPSnoopingConf 1 }
gs2310pplusDHCPSnoopingPortModeConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSDHCPSnoopingPortModeConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingConf 2 }
gs2310pplusDHCPSnoopingPortModeConfigurationEntry OBJECT-TYPE
SYNTAX GS2310PPLUSDHCPSnoopingPortModeConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusDHCPSnoopingPortModeConfigurationPort }
::= { gs2310pplusDHCPSnoopingPortModeConfigurationTable 1 }
GS2310PPLUSDHCPSnoopingPortModeConfigurationEntry ::= SEQUENCE {
gs2310pplusDHCPSnoopingPortModeConfigurationPort Integer32,
gs2310pplusDHCPSnoopingPortModeConfigurationMode INTEGER
}
gs2310pplusDHCPSnoopingPortModeConfigurationPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingPortModeConfigurationEntry 1 }
gs2310pplusDHCPSnoopingPortModeConfigurationMode OBJECT-TYPE
SYNTAX INTEGER { trust(0), untrust(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: trust port mode
1: untrust port mode"
::= { gs2310pplusDHCPSnoopingPortModeConfigurationEntry 2 }
gs2310pplusDHCPSnoopingStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSDHCPSnoopingStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnooping 2 }
gs2310pplusDHCPSnoopingStatisticsEntry OBJECT-TYPE
SYNTAX GS2310PPLUSDHCPSnoopingStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusDHCPSnoopingStatisticsPort }
::= { gs2310pplusDHCPSnoopingStatisticsTable 1 }
GS2310PPLUSDHCPSnoopingStatisticsEntry ::= SEQUENCE {
gs2310pplusDHCPSnoopingStatisticsPort Integer32,
gs2310pplusDHCPSnoopingStatisticsClear INTEGER,
gs2310pplusDHCPSnoopingRxDiscover Counter32,
gs2310pplusDHCPSnoopingRxOffer Counter32,
gs2310pplusDHCPSnoopingRxRequest Counter32,
gs2310pplusDHCPSnoopingRxDecline Counter32,
gs2310pplusDHCPSnoopingRxACK Counter32,
gs2310pplusDHCPSnoopingRxNAK Counter32,
gs2310pplusDHCPSnoopingRxRelease Counter32,
gs2310pplusDHCPSnoopingRxInform Counter32,
gs2310pplusDHCPSnoopingRxLeaseQuery Counter32,
gs2310pplusDHCPSnoopingRxLeaseUnassigned Counter32,
gs2310pplusDHCPSnoopingRxLeaseUnknown Counter32,
gs2310pplusDHCPSnoopingRxLeaseActive Counter32,
gs2310pplusDHCPSnoopingTxDiscover Counter32,
gs2310pplusDHCPSnoopingTxOffer Counter32,
gs2310pplusDHCPSnoopingTxRequest Counter32,
gs2310pplusDHCPSnoopingTxDecline Counter32,
gs2310pplusDHCPSnoopingTxACK Counter32,
gs2310pplusDHCPSnoopingTxNAK Counter32,
gs2310pplusDHCPSnoopingTxRelease Counter32,
gs2310pplusDHCPSnoopingTxInform Counter32,
gs2310pplusDHCPSnoopingTxLeaseQuery Counter32,
gs2310pplusDHCPSnoopingTxLeaseUnassigned Counter32,
gs2310pplusDHCPSnoopingTxLeaseUnknown Counter32,
gs2310pplusDHCPSnoopingTxLeaseActive Counter32
}
gs2310pplusDHCPSnoopingStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 1 }
gs2310pplusDHCPSnoopingStatisticsClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: clear"
::= { gs2310pplusDHCPSnoopingStatisticsEntry 2 }
gs2310pplusDHCPSnoopingRxDiscover OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 3 }
gs2310pplusDHCPSnoopingRxOffer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 4 }
gs2310pplusDHCPSnoopingRxRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 5 }
gs2310pplusDHCPSnoopingRxDecline OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 6 }
gs2310pplusDHCPSnoopingRxACK OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 7 }
gs2310pplusDHCPSnoopingRxNAK OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 8 }
gs2310pplusDHCPSnoopingRxRelease OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 9 }
gs2310pplusDHCPSnoopingRxInform OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 10 }
gs2310pplusDHCPSnoopingRxLeaseQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 11 }
gs2310pplusDHCPSnoopingRxLeaseUnassigned OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 12 }
gs2310pplusDHCPSnoopingRxLeaseUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 13 }
gs2310pplusDHCPSnoopingRxLeaseActive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 14 }
gs2310pplusDHCPSnoopingTxDiscover OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 15 }
gs2310pplusDHCPSnoopingTxOffer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 16 }
gs2310pplusDHCPSnoopingTxRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 17 }
gs2310pplusDHCPSnoopingTxDecline OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 18 }
gs2310pplusDHCPSnoopingTxACK OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 19 }
gs2310pplusDHCPSnoopingTxNAK OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 20 }
gs2310pplusDHCPSnoopingTxRelease OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 21 }
gs2310pplusDHCPSnoopingTxInform OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 22 }
gs2310pplusDHCPSnoopingTxLeaseQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 23 }
gs2310pplusDHCPSnoopingTxLeaseUnassigned OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 24 }
gs2310pplusDHCPSnoopingTxLeaseUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 25 }
gs2310pplusDHCPSnoopingTxLeaseActive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPSnoopingStatisticsEntry 26 }
gs2310pplusDHCPRelay OBJECT IDENTIFIER ::= { gs2310pplusSecurity 4 }
gs2310pplusDHCPRelayConfiguration OBJECT IDENTIFIER ::= { gs2310pplusDHCPRelay 1 }
gs2310pplusDHCPRelayMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable
We need at least one server"
::= { gs2310pplusDHCPRelayConfiguration 1 }
gs2310pplusDHCPRelayServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayConfiguration 2 }
gs2310pplusDHCPRelayInformationMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusDHCPRelayConfiguration 3 }
gs2310pplusDHCPRelayInformationPolicy OBJECT-TYPE
SYNTAX INTEGER { replace(0), keep(1), drop(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: replace
1: keep
2: drop "
::= { gs2310pplusDHCPRelayConfiguration 4 }
gs2310pplusDHCPRelayInformationCustom OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Option 82 Circuit ID custom information"
::= { gs2310pplusDHCPRelayConfiguration 1500 }
gs2310pplusDHCPRelayConfigurationGateways OBJECT IDENTIFIER ::= { gs2310pplusDHCPRelayConfiguration 5 }
gs2310pplusDHCPRelayConfigurationGatewaysCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2310pplusDHCPRelayConfigurationGateways 1 }
gs2310pplusDHCPRelayConfigurationGatewaysTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusDHCPRelayConfigurationGatewaysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create DHCP Relay Gateway IP address entry."
::= { gs2310pplusDHCPRelayConfigurationGateways 2 }
gs2310pplusDHCPRelayConfigurationGatewaysEntry OBJECT-TYPE
SYNTAX Gs2310pplusDHCPRelayConfigurationGatewaysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusDHCPRelayConfigurationGatewaysIndex }
::= { gs2310pplusDHCPRelayConfigurationGatewaysTable 1 }
Gs2310pplusDHCPRelayConfigurationGatewaysEntry ::= SEQUENCE {
gs2310pplusDHCPRelayConfigurationGatewaysIndex Integer32,
gs2310pplusDHCPRelayConfigurationGatewaysVLANId Integer32,
gs2310pplusDHCPRelayConfigurationGatewaysIP IpAddress,
gs2310pplusDHCPRelayConfigurationGatewaysRowStatus INTEGER
}
gs2310pplusDHCPRelayConfigurationGatewaysIndex OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayConfigurationGatewaysEntry 1 }
gs2310pplusDHCPRelayConfigurationGatewaysVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" VLAN ID "
::= { gs2310pplusDHCPRelayConfigurationGatewaysEntry 2 }
gs2310pplusDHCPRelayConfigurationGatewaysIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP GIADDR address."
::= { gs2310pplusDHCPRelayConfigurationGatewaysEntry 3 }
gs2310pplusDHCPRelayConfigurationGatewaysRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2310pplusDHCPRelayConfigurationGatewaysEntry 4 }
gs2310pplusDHCPRelayStatistics OBJECT IDENTIFIER ::= { gs2310pplusDHCPRelay 2 }
gs2310pplusDHCPRelayServerStatistics OBJECT IDENTIFIER ::= { gs2310pplusDHCPRelayStatistics 1 }
gs2310pplusServerStatTransmitToServer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayServerStatistics 1 }
gs2310pplusServerStatTransmitError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayServerStatistics 2 }
gs2310pplusServerStatReceiveFromServer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayServerStatistics 3 }
gs2310pplusServerStatReceiveMissingAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayServerStatistics 4 }
gs2310pplusServerStatReceiveMissingCircuitID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayServerStatistics 5 }
gs2310pplusServerStatReceiveMissingRemoteID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayServerStatistics 6 }
gs2310pplusServerStatReceiveBadCircuitID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayServerStatistics 7 }
gs2310pplusServerStatReceiveBadRemoteID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayServerStatistics 8 }
gs2310pplusDHCPRelayClientStatistics OBJECT IDENTIFIER ::= { gs2310pplusDHCPRelayStatistics 2 }
gs2310pplusClientStatTransmitToClient OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayClientStatistics 1 }
gs2310pplusClientStatTransmitError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayClientStatistics 2 }
gs2310pplusClientStatReceivefromClient OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayClientStatistics 3 }
gs2310pplusClientStatReceiveAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayClientStatistics 4 }
gs2310pplusClientStatReplaceAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayClientStatistics 5 }
gs2310pplusClientStatKeepAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayClientStatistics 6 }
gs2310pplusClientStatDropAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusDHCPRelayClientStatistics 7 }
gs2310pplusPortSecurity OBJECT IDENTIFIER ::= { gs2310pplusSecurity 5 }
gs2310pplusPortSecLimitCtrl OBJECT IDENTIFIER ::= { gs2310pplusPortSecurity 1 }
gs2310pplusPortSecLimitCtrlSystemConf OBJECT IDENTIFIER ::= { gs2310pplusPortSecLimitCtrl 1 }
gs2310pplusPortSecurityMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusPortSecLimitCtrlSystemConf 1 }
gs2310pplusPortSecurityAging OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusPortSecLimitCtrlSystemConf 2 }
gs2310pplusPortSecurityAgingPeriod OBJECT-TYPE
SYNTAX INTEGER(10..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 3600, range: 10-10000000 "
::= { gs2310pplusPortSecLimitCtrlSystemConf 3 }
gs2310pplusPortSecLimitCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPortSecLimitCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecLimitCtrl 2 }
gs2310pplusPortSecLimitCtrlEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPortSecLimitCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPortSecLimitCtrlPort }
::= { gs2310pplusPortSecLimitCtrlTable 1 }
GS2310PPLUSPortSecLimitCtrlEntry ::= SEQUENCE {
gs2310pplusPortSecLimitCtrlPort Integer32,
gs2310pplusPortSecLimitCtrlPortMode INTEGER,
gs2310pplusPortSecLimitCtrlPortLimit Integer32,
gs2310pplusPortSecLimitCtrlPortAction INTEGER,
gs2310pplusPortSecLimitCtrlPortState DisplayString,
gs2310pplusPortSecLimitCtrlPortReOpen INTEGER
}
gs2310pplusPortSecLimitCtrlPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecLimitCtrlEntry 1 }
gs2310pplusPortSecLimitCtrlPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2310pplusPortSecLimitCtrlEntry 2 }
gs2310pplusPortSecLimitCtrlPortLimit OBJECT-TYPE
SYNTAX Integer32(1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 4, range: 1-1024"
::= { gs2310pplusPortSecLimitCtrlEntry 3 }
gs2310pplusPortSecLimitCtrlPortAction OBJECT-TYPE
SYNTAX INTEGER { none(0), trap(1), shutdown(2), trapShutdown(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: trap
2: shutdown
3: trap&shutdown"
::= { gs2310pplusPortSecLimitCtrlEntry 4 }
gs2310pplusPortSecLimitCtrlPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusPortSecLimitCtrlEntry 5 }
gs2310pplusPortSecLimitCtrlPortReOpen OBJECT-TYPE
SYNTAX INTEGER { none(0), reopen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: reopen"
::= { gs2310pplusPortSecLimitCtrlEntry 6 }
gs2310pplusPortSecSwitchStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPortSecSwitchStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecurity 2 }
gs2310pplusPortSecSwitchStatusEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPortSecSwitchStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPortSecSwitchStatusPort }
::= { gs2310pplusPortSecSwitchStatusTable 1 }
GS2310PPLUSPortSecSwitchStatusEntry ::= SEQUENCE {
gs2310pplusPortSecSwitchStatusPort Integer32,
gs2310pplusPortSecSwitchStatusUsers DisplayString,
gs2310pplusPortSecSwitchStatusState DisplayString,
gs2310pplusPortSecSwitchStatusMACCountCurrent Integer32,
gs2310pplusPortSecSwitchStatusMACCountLimit Integer32
}
gs2310pplusPortSecSwitchStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecSwitchStatusEntry 1 }
gs2310pplusPortSecSwitchStatusUsers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN,
'-' means that the corresponding user module is not enabled. "
::= { gs2310pplusPortSecSwitchStatusEntry 2 }
gs2310pplusPortSecSwitchStatusState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown. "
::= { gs2310pplusPortSecSwitchStatusEntry 3 }
gs2310pplusPortSecSwitchStatusMACCountCurrent OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusPortSecSwitchStatusEntry 4 }
gs2310pplusPortSecSwitchStatusMACCountLimit OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2310pplusPortSecSwitchStatusEntry 5 }
gs2310pplusPortSecPortStatus OBJECT IDENTIFIER ::= { gs2310pplusPortSecurity 3 }
gs2310pplusPortSecPortStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port number
default: 1
range: 1 - port number."
::= { gs2310pplusPortSecPortStatus 1 }
gs2310pplusPortSecPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSPortSecPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecPortStatus 2 }
gs2310pplusPortSecPortStatusEntry OBJECT-TYPE
SYNTAX GS2310PPLUSPortSecPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusPortSecPortStatusIndex }
::= { gs2310pplusPortSecPortStatusTable 1 }
GS2310PPLUSPortSecPortStatusEntry ::= SEQUENCE {
gs2310pplusPortSecPortStatusIndex Integer32,
gs2310pplusPortSecPortStatusMACAddress MacAddress,
gs2310pplusPortSecPortStatusVLANId Integer32,
gs2310pplusPortSecPortStatusState DisplayString,
gs2310pplusPortSecPortStatusTimeOfAddition DisplayString,
gs2310pplusPortSecPortStatusAgeAndHold DisplayString
}
gs2310pplusPortSecPortStatusIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecPortStatusEntry 1 }
gs2310pplusPortSecPortStatusMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecPortStatusEntry 2 }
gs2310pplusPortSecPortStatusVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecPortStatusEntry 3 }
gs2310pplusPortSecPortStatusState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Blocked / Forwarding "
::= { gs2310pplusPortSecPortStatusEntry 4 }
gs2310pplusPortSecPortStatusTimeOfAddition OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecPortStatusEntry 5 }
gs2310pplusPortSecPortStatusAgeAndHold OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusPortSecPortStatusEntry 6 }
gs2310pplusAccessManagement OBJECT IDENTIFIER ::= { gs2310pplusSecurity 6 }
gs2310pplusAccessMgtConf OBJECT IDENTIFIER ::= { gs2310pplusAccessManagement 1 }
gs2310pplusAccessMgtConfMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusAccessMgtConf 1 }
gs2310pplusAccessMgtConfCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: create "
::= { gs2310pplusAccessMgtConf 2 }
gs2310pplusAccessMgtConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2310PPLUSAccessMgtConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtConf 3 }
gs2310pplusAccessMgtConfEntry OBJECT-TYPE
SYNTAX GS2310PPLUSAccessMgtConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusAccessMgtIndex }
::= { gs2310pplusAccessMgtConfTable 1 }
GS2310PPLUSAccessMgtConfEntry ::= SEQUENCE {
gs2310pplusAccessMgtIndex Integer32,
gs2310pplusAccessMgtAddresstype INTEGER,
gs2310pplusAccessMgtStartIpAddress DisplayString,
gs2310pplusAccessMgtEndIpAddress DisplayString,
gs2310pplusAccessMgtHttpHttps INTEGER,
gs2310pplusAccessMgtSNMP INTEGER,
gs2310pplusAccessMgtTelnetSSH INTEGER,
gs2310pplusAccessMgtRowStatus INTEGER
}
gs2310pplusAccessMgtIndex OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Access Management config index
range : 1-16."
::= { gs2310pplusAccessMgtConfEntry 1 }
gs2310pplusAccessMgtAddresstype OBJECT-TYPE
SYNTAX INTEGER { ipv4(0), ipv6(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: ipv4
1: ipv6 "
::= { gs2310pplusAccessMgtConfEntry 2 }
gs2310pplusAccessMgtStartIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Start IP address.
IP address doesn't allowed all zero or all 'ff'H."
::= { gs2310pplusAccessMgtConfEntry 3 }
gs2310pplusAccessMgtEndIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" End IP address.
IP address doesn't allowed all zero or all 'ff'H.
End ip address is not less than start ip address."
::= { gs2310pplusAccessMgtConfEntry 4 }
gs2310pplusAccessMgtHttpHttps OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusAccessMgtConfEntry 5 }
gs2310pplusAccessMgtSNMP OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusAccessMgtConfEntry 6 }
gs2310pplusAccessMgtTelnetSSH OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2310pplusAccessMgtConfEntry 7 }
gs2310pplusAccessMgtRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3),destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2310pplusAccessMgtConfEntry 8 }
gs2310pplusAccessMgtStatistics OBJECT IDENTIFIER ::= { gs2310pplusAccessManagement 2 }
gs2310pplusHttpReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 1 }
gs2310pplusHttpAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 2 }
gs2310pplusHttpDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 3 }
gs2310pplusHttpsReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 4 }
gs2310pplusHttpsAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 5 }
gs2310pplusHttpsDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 6 }
gs2310pplusSnmpReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 7 }
gs2310pplusSnmpAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 8 }
gs2310pplusSnmpDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 9 }
gs2310pplusTelnetReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 10 }
gs2310pplusTelnetAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 11 }
gs2310pplusTelnetDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 12 }
gs2310pplusSSHReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 13 }
gs2310pplusSSHAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 14 }
gs2310pplusSSHDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAccessMgtStatistics 15 }
gs2310pplusAccessMgtStatisticsClearAll OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: none
1: clear"
::= { gs2310pplusAccessMgtStatistics 16 }
gs2310pplusSSH OBJECT IDENTIFIER ::= { gs2310pplusSecurity 7 }
gs2310pplusSSHMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: disable
1: enable"
::= { gs2310pplusSSH 1 }
gs2310pplusHTTPS OBJECT IDENTIFIER ::= { gs2310pplusSecurity 8 }
gs2310pplusHTTPSMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: disable
1: enable"
::= { gs2310pplusHTTPS 1 }
gs2310pplusHTTPSAutoRedirect OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2310pplusHTTPS 2 }
gs2310pplusHTTPSCertRenew OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), renew(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0 ,
0: doNothing
1: renew"
::= { gs2310pplusHTTPS 3 }
gs2310pplusHTTPSMinProtoVersion OBJECT-TYPE
SYNTAX INTEGER { SSLv3(0), TLSv1(1), TLSv11(2), TLSv12(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: SSLv3
1: TLSv1
2: TLSv1.1
3: TLSv1.2"
::= { gs2310pplusHTTPS 4 }
gs2310pplusHTTPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: disable
1: enable"
::= { gs2310pplusHTTPS 5 }
gs2310pplusAuthMethod OBJECT IDENTIFIER ::= { gs2310pplusSecurity 9 }
gs2310pplusConsoleAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2310pplusAuthMethod 1 }
gs2310pplusConsoleFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2310pplusAuthMethod 2 }
gs2310pplusTelnetAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2310pplusAuthMethod 3 }
gs2310pplusTelnetFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2310pplusAuthMethod 4 }
gs2310pplusSshAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2310pplusAuthMethod 5 }
gs2310pplusSshFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2310pplusAuthMethod 6 }
gs2310pplusTftpAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2310pplusAuthMethod 9 }
gs2310pplusTftpFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2310pplusAuthMethod 10 }
gs2310pplusLoginFailures OBJECT-TYPE
SYNTAX Integer32(0..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When login failures mechanism is triggered,the lock minutes will prevent to login in this periods.
The value '0' should deactivate this feature.
range: 0-99.
default: 5."
::= { gs2310pplusAuthMethod 11 }
gs2310pplusLockMinutes OBJECT-TYPE
SYNTAX Integer32(1..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lock time to login failures trigger.
range: 1-99.
default: 5."
::= { gs2310pplusAuthMethod 12 }
gs2310pplusHttpAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2310pplusAuthMethod 13 }
gs2310pplusHttpFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2310pplusAuthMethod 14 }
gs2310pplusHttpsAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2310pplusAuthMethod 15 }
gs2310pplusHttpsFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2310pplusAuthMethod 16 }
gs2310pplusAAA OBJECT IDENTIFIER ::= { gs2310pplusSecurity 10 }
gs2310pplusAAACommonServer OBJECT IDENTIFIER ::= { gs2310pplusAAA 1 }
gs2310pplusAAACommonServerTimeout OBJECT-TYPE
SYNTAX Integer32(3..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Timeout, which can be set to a number between 3 and 3600 seconds, is
the maximum time to wait for a reply from a server. If the server does not
reply within this timeframe, we will consider it to be dead and continue
with the next enabled server (if any). RADIUS servers are using the UDP
protocol, which is unreliable by design. In order to cope with lost frames,
the timeout interval is divided into 3 subintervals of equal length. If a
reply is not received within the subinterval, the request is transmitted
again. This algorithm causes the RADIUS server to be queried up to 3 times
before it is considered to be dead.
default: 15."
::= { gs2310pplusAAACommonServer 1 }
gs2310pplusAAACommonServerDeadTime OBJECT-TYPE
SYNTAX Integer32(0..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dead Time, which can be set to a number between 0 and 3600 seconds,
is the period during which the switch will not send new requests to a
server that has failed to respond to a previous request. This will stop
the switch from continually trying to contact a server that it has already
determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature,
but only if more than one server has been configured.
default: 300."
::= { gs2310pplusAAACommonServer 2 }
gs2310pplusAAATACACSPlusAuthAndAccounting OBJECT IDENTIFIER ::= { gs2310pplusAAA 2 }
gs2310pplusAAAAuthorization OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authorization is the action of determining what a user is allowed to do.
An authorization request may indicate that the user is not authenticated.
In this case it is up to the authorization agent to determine if an
unauthenticated user is allowed the services in question. "
::= { gs2310pplusAAATACACSPlusAuthAndAccounting 1 }
gs2310pplusAAAFallbackToLocalAuthorization OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This function is an auxiliary function of Authorization. When the DUT
cannot communicate with TACACS+ Server normally, it will check the right/
permission level of the Local Account to execute the Authorization. "
::= { gs2310pplusAAATACACSPlusAuthAndAccounting 2 }
gs2310pplusAAAAccounting OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Accounting is typically the third action after authentication and
authorization. Accounting is the action of recording what a user is doing,
and/or has done. TACACS+ accounting records contain all the information
used in the authorization records and resource usage information. "
::= { gs2310pplusAAATACACSPlusAuthAndAccounting 3 }
gs2310pplusRADIUSAuthenticationServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusRADIUSAuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAAA 3 }
gs2310pplusRADIUSAuthenticationServerEntry OBJECT-TYPE
SYNTAX Gs2310pplusRADIUSAuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusRADIUSAuthenticationServerIndex }
::= { gs2310pplusRADIUSAuthenticationServerTable 1 }
Gs2310pplusRADIUSAuthenticationServerEntry ::= SEQUENCE {
gs2310pplusRADIUSAuthenticationServerIndex Integer32,
gs2310pplusRADIUSAuthenticationServerEnable INTEGER,
gs2310pplusRADIUSAuthenticationServerIP DisplayString,
gs2310pplusRADIUSAuthenticationServerPort Integer32,
gs2310pplusRADIUSAuthenticationServerSecret DisplayString
}
gs2310pplusRADIUSAuthenticationServerIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RADIUS Authentication Server index
range : 1-5."
::= { gs2310pplusRADIUSAuthenticationServerEntry 1 }
gs2310pplusRADIUSAuthenticationServerEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the RADIUS Authentication Server. the RADIUSAuthenticationServerEnable
can be set, when IP and Secret have value "
::= { gs2310pplusRADIUSAuthenticationServerEntry 2 }
gs2310pplusRADIUSAuthenticationServerIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address or hostname of the RADIUS Authentication Server.
IP address is expressed in dotted decimal notation. "
::= { gs2310pplusRADIUSAuthenticationServerEntry 3 }
gs2310pplusRADIUSAuthenticationServerPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port to use on the RADIUS Authentication Server. If the port is
set to 0 (zero), the default port (1812) is used on the RADIUS Authentication Server. "
::= { gs2310pplusRADIUSAuthenticationServerEntry 4 }
gs2310pplusRADIUSAuthenticationServerSecret OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret - up to 64 characters long - shared between the RADIUS Authentication Server and the switch. "
::= { gs2310pplusRADIUSAuthenticationServerEntry 5 }
gs2310pplusRADIUSAccountingServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusRADIUSAccountingServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAAA 4 }
gs2310pplusRADIUSAccountingServerEntry OBJECT-TYPE
SYNTAX Gs2310pplusRADIUSAccountingServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusRADIUSAccountingServerIndex }
::= { gs2310pplusRADIUSAccountingServerTable 1 }
Gs2310pplusRADIUSAccountingServerEntry ::= SEQUENCE {
gs2310pplusRADIUSAccountingServerIndex Integer32,
gs2310pplusRADIUSAccountingServerEnable INTEGER,
gs2310pplusRADIUSAccountingServerIP DisplayString,
gs2310pplusRADIUSAccountingServerPort Integer32,
gs2310pplusRADIUSAccountingServerSecret DisplayString
}
gs2310pplusRADIUSAccountingServerIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RADIUS Accounting Server index
range : 1-5."
::= { gs2310pplusRADIUSAccountingServerEntry 1 }
gs2310pplusRADIUSAccountingServerEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the RADIUS Accounting Server. The RADIUSAccountingServerEnable
can be set, when IP and Secret have value. "
::= { gs2310pplusRADIUSAccountingServerEntry 2 }
gs2310pplusRADIUSAccountingServerIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address or hostname of the RADIUS Accounting Server.
IP address is expressed in dotted decimal notation. "
::= { gs2310pplusRADIUSAccountingServerEntry 3 }
gs2310pplusRADIUSAccountingServerPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port to use on the RADIUS Accounting Server. If the port is
set to 0 (zero), the default port (1812) is used on the RADIUS Accounting Server. "
::= { gs2310pplusRADIUSAccountingServerEntry 4 }
gs2310pplusRADIUSAccountingServerSecret OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret - up to 64 characters long - shared between the RADIUS Accounting Server and the switch. "
::= { gs2310pplusRADIUSAccountingServerEntry 5 }
gs2310pplusTACACSPlusAuthenticationServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusTACACSPlusAuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAAA 5 }
gs2310pplusTACACSPlusAuthenticationServerEntry OBJECT-TYPE
SYNTAX Gs2310pplusTACACSPlusAuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusTACACSPlusAuthenticationServerIndex }
::= { gs2310pplusTACACSPlusAuthenticationServerTable 1 }
Gs2310pplusTACACSPlusAuthenticationServerEntry ::= SEQUENCE {
gs2310pplusTACACSPlusAuthenticationServerIndex Integer32,
gs2310pplusTACACSPlusAuthenticationServerEnable INTEGER,
gs2310pplusTACACSPlusAuthenticationServerIP DisplayString,
gs2310pplusTACACSPlusAuthenticationServerPort Integer32,
gs2310pplusTACACSPlusAuthenticationServerSecret DisplayString
}
gs2310pplusTACACSPlusAuthenticationServerIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TACACSPlus Authentication Server index
range : 1-5."
::= { gs2310pplusTACACSPlusAuthenticationServerEntry 1 }
gs2310pplusTACACSPlusAuthenticationServerEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the TACACSPlus Authentication Server. The
TACACSPlusAuthenticationServerEnable can be set, when IP and Secret have
value."
::= { gs2310pplusTACACSPlusAuthenticationServerEntry 2 }
gs2310pplusTACACSPlusAuthenticationServerIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address or hostname of the TACACSPlus Authentication Server.
IP address is expressed in dotted decimal notation. "
::= { gs2310pplusTACACSPlusAuthenticationServerEntry 3 }
gs2310pplusTACACSPlusAuthenticationServerPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port to use on the TACACSPlus Authentication Server. If the
port is set to 0 (zero), the default port (1812) is used on the
TACACSPlus Authentication Server. "
::= { gs2310pplusTACACSPlusAuthenticationServerEntry 4 }
gs2310pplusTACACSPlusAuthenticationServerSecret OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret - up to 64 characters long - shared between the TACACSPlus Authentication Server and the switch. "
::= { gs2310pplusTACACSPlusAuthenticationServerEntry 5 }
gs2310pplusRADIUSStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusRADIUSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2310pplusAAA 6 }
gs2310pplusRADIUSStatisticsEntry OBJECT-TYPE
SYNTAX Gs2310pplusRADIUSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusRADIUSAuthStatisticsServerIndex }
::= { gs2310pplusRADIUSStatisticsTable 1 }
Gs2310pplusRADIUSStatisticsEntry ::= SEQUENCE {
gs2310pplusRADIUSAuthStatisticsServerIndex Integer32,
gs2310pplusRADIUSAuthStatisticsRecPktAccessAccepts Counter32,
gs2310pplusRADIUSAuthStatisticsRecPktAccessRejects Counter32,
gs2310pplusRADIUSAuthStatisticsRecPktAccessChallenges Counter32,
gs2310pplusRADIUSAuthStatisticsRecPktMalformedAccResponses Counter32,
gs2310pplusRADIUSAuthStatisticsRecPktBadAuthenticators Counter32,
gs2310pplusRADIUSAuthStatisticsRecPktUnknownTypes Counter32,
gs2310pplusRADIUSAuthStatisticsRecPktDropped Counter32,
gs2310pplusRADIUSAuthStatisticsTransmitPktAccessRequests Counter32,
gs2310pplusRADIUSAuthStatisticsTransmitPktAccessRetransmissions Counter32,
gs2310pplusRADIUSAuthStatisticsTransmitPktPendingRequests Counter32,
gs2310pplusRADIUSAuthStatisticsTransmitPktTimeouts Counter32,
gs2310pplusRADIUSAuthIP DisplayString,
gs2310pplusRADIUSAuthState DisplayString,
gs2310pplusRADIUSAuthRoundTripTime DisplayString,
gs2310pplusRADIUSAccountingStatisticsRecPktResponses Counter32,
gs2310pplusRADIUSAccountingStatisticsRecPktMalformedResponses Counter32,
gs2310pplusRADIUSAccountingStatisticsRecPktBadAuthenticators Counter32,
gs2310pplusRADIUSAccountingStatisticsRecPktUnknownTypes Counter32,
gs2310pplusRADIUSAccountingStatisticsRecPktDropped Counter32,
gs2310pplusRADIUSAccountingStatisticsTransmitPktRequests Counter32,
gs2310pplusRADIUSAccountingStatisticsTransmitPktRetransmissions Counter32,
gs2310pplusRADIUSAccountingStatisticsTransmitPktPendingRequests Counter32,
gs2310pplusRADIUSAccountingStatisticsTransmitPktTimeouts Counter32,
gs2310pplusRADIUSAccountingIP DisplayString,
gs2310pplusRADIUSAccountingState DisplayString,
gs2310pplusRADIUSAccountingRoundTripTime DisplayString,
gs2310pplusRADIUSStatisticsClear INTEGER
}
gs2310pplusRADIUSAuthStatisticsServerIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RADIUS Authentication Server index
range : 1-5."
::= { gs2310pplusRADIUSStatisticsEntry 1 }
gs2310pplusRADIUSAuthStatisticsRecPktAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Accept packets (valid or invalid) received from the server."
::= { gs2310pplusRADIUSStatisticsEntry 2 }
gs2310pplusRADIUSAuthStatisticsRecPktAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Reject packets (valid or invalid) received from the server."
::= { gs2310pplusRADIUSStatisticsEntry 3 }
gs2310pplusRADIUSAuthStatisticsRecPktAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Challenge packets (valid or invalid) received from the server. "
::= { gs2310pplusRADIUSStatisticsEntry 4 }
gs2310pplusRADIUSAuthStatisticsRecPktMalformedAccResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Access-Response packets received from the
server. Malformed packets include packets with an invalid length. Bad
authenticators or Message Authenticator attributes or unknown types are
not included as malformed access responses. "
::= { gs2310pplusRADIUSStatisticsEntry 5 }
gs2310pplusRADIUSAuthStatisticsRecPktBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Response packets containing invalid
authenticators or Message Authenticator attributes received from the server."
::= { gs2310pplusRADIUSStatisticsEntry 6 }
gs2310pplusRADIUSAuthStatisticsRecPktUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets that were received with unknown types from
the server on the authentication port and dropped."
::= { gs2310pplusRADIUSStatisticsEntry 7 }
gs2310pplusRADIUSAuthStatisticsRecPktDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets that were received from the server on the
authentication port and dropped for some other reason."
::= { gs2310pplusRADIUSStatisticsEntry 8 }
gs2310pplusRADIUSAuthStatisticsTransmitPktAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets sent to the server. This
does not include retransmissions."
::= { gs2310pplusRADIUSStatisticsEntry 9 }
gs2310pplusRADIUSAuthStatisticsTransmitPktAccessRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets retransmitted to the RADIUS
authentication server."
::= { gs2310pplusRADIUSStatisticsEntry 10 }
gs2310pplusRADIUSAuthStatisticsTransmitPktPendingRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets destined for the server that
have not yet timed out or received a response. This variable is
incremented when an Access-Request is sent and decremented due to
receipt of an Access-Accept, Access-Reject, Access-Challenge, timeout,
or retransmission. "
::= { gs2310pplusRADIUSStatisticsEntry 11 }
gs2310pplusRADIUSAuthStatisticsTransmitPktTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication timeouts to the server. After a timeout,
the client may retry to the same server, send to a different server, or
give up. A retry to the same server is counted as a retransmit as well as
a timeout. A send to a different server is counted as a Request as well
as a timeout. "
::= { gs2310pplusRADIUSStatisticsEntry 12 }
gs2310pplusRADIUSAuthIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address and UDP port for the authentication server in question."
::= { gs2310pplusRADIUSStatisticsEntry 13 }
gs2310pplusRADIUSAuthState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not
reply within the configured timeout. The server has temporarily been disabled,
but will get re-enabled when the dead-time expires. The number of seconds left
before this occurs is displayed in parentheses. This state is only reachable
when more than one server is enabled. "
::= { gs2310pplusRADIUSStatisticsEntry 14 }
gs2310pplusRADIUSAuthRoundTripTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval (measured in milliseconds) between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it from
the RADIUS authentication server. The granularity of this measurement is
100 ms. A value of 0 ms indicates that there hasn't been round-trip
communication with the server yet. "
::= { gs2310pplusRADIUSStatisticsEntry 15 }
gs2310pplusRADIUSAccountingStatisticsRecPktResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets (valid or invalid) received from the server."
::= { gs2310pplusRADIUSStatisticsEntry 16 }
gs2310pplusRADIUSAccountingStatisticsRecPktMalformedResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS packets received from the server.
Malformed packets include packets with an invalid length. Bad
authenticators or unknown types are not included as malformed access
responses. "
::= { gs2310pplusRADIUSStatisticsEntry 17 }
gs2310pplusRADIUSAccountingStatisticsRecPktBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets containing invalid authenticators received
from the server."
::= { gs2310pplusRADIUSStatisticsEntry 18 }
gs2310pplusRADIUSAccountingStatisticsRecPktUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown types that were received from
the server on the accounting port."
::= { gs2310pplusRADIUSStatisticsEntry 19 }
gs2310pplusRADIUSAccountingStatisticsRecPktDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets that were received from the server on the
accounting port and dropped for some other reason."
::= { gs2310pplusRADIUSStatisticsEntry 20 }
gs2310pplusRADIUSAccountingStatisticsTransmitPktRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets sent to the server. This does not include
retransmissions."
::= { gs2310pplusRADIUSStatisticsEntry 21 }
gs2310pplusRADIUSAccountingStatisticsTransmitPktRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets retransmitted to the RADIUS accounting server."
::= { gs2310pplusRADIUSStatisticsEntry 22 }
gs2310pplusRADIUSAccountingStatisticsTransmitPktPendingRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets destined for the server that have not yet
timed out or received a response. This variable is incremented when a
Request is sent and decremented due to receipt of a Response, timeout,
or retransmission. "
::= { gs2310pplusRADIUSStatisticsEntry 23 }
gs2310pplusRADIUSAccountingStatisticsTransmitPktTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of accounting timeouts to the server. After a timeout, the
client may retry to the same server, send to a different server, or give
up. A retry to the same server is counted as a retransmit as well as a
timeout. A send to a different server is counted as a Request as well as
a timeout. "
::= { gs2310pplusRADIUSStatisticsEntry 24 }
gs2310pplusRADIUSAccountingIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address and UDP port for the accounting server in question."
::= { gs2310pplusRADIUSStatisticsEntry 25 }
gs2310pplusRADIUSAccountingState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did
not reply within the configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time expires. The number of
seconds left before this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled. "
::= { gs2310pplusRADIUSStatisticsEntry 26 }
gs2310pplusRADIUSAccountingRoundTripTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval (measured in milliseconds) between the most recent
Response and the Request that matched it from the RADIUS accounting
server. The granularity of this measurement is 100 ms. A value of 0 ms
indicates that there hasn't been round-trip communication with the server
yet. "
::= { gs2310pplusRADIUSStatisticsEntry 27 }
gs2310pplusRADIUSStatisticsClear OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears the counters for the server.
read: always 0
clear: set 1"
::= { gs2310pplusRADIUSStatisticsEntry 28 }
gs2310pplusNAS OBJECT IDENTIFIER ::= { gs2310pplusSecurity 11 }
gs2310pplusNASConfiguration OBJECT IDENTIFIER ::= { gs2310pplusNAS 1 }
gs2310pplusNASConfigMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if NAS is globally enabled or disabled on the switch.
If globally disabled, all ports are allowed forwarding of frames."
::= { gs2310pplusNASConfiguration 1 }
gs2310pplusNASConfigReauthEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If checked, successfully authenticated supplicants/clients are
reauthenticated after the interval specified by the Reauthentication
Period. Reauthentication for 802.1X-enabled ports can be used to
detect if a new device is plugged into a switch port or if a
supplicant is no longer attached.
For MAC-based ports, reauthentication is only useful if the RADIUS
server configuration has changed. It does not involve communication
between the switch and the client, and therefore doesn't imply that
a client is still present on a port."
::= { gs2310pplusNASConfiguration 2 }
gs2310pplusNASConfigReauthPeriod OBJECT-TYPE
SYNTAX Integer32(1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the period, in seconds, after which a connected client must
be reauthenticated. This is only active if the Reauthentication Enabled
checkbox is checked.
range: 1 - 3600 seconds."
::= { gs2310pplusNASConfiguration 3 }
gs2310pplusNASConfigEAPOLTimeout OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the time for retransmission of Request Identity EAPOL frames.
This has no effect for MAC-based ports.
range: 1 - 65535 seconds."
::= { gs2310pplusNASConfiguration 4 }
gs2310pplusNASConfigAgingPeriod OBJECT-TYPE
SYNTAX Integer32(10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the NAS module uses the Port Security module to secure MAC addresses,
the Port Security module needs to check for activity on the MAC address
in question at regular intervals and free resources if no activity
is seen within a given period of time.
Admin State supported : Single, Multi and MAC-Based Auth. 802.1X.
range: 10 - 1000000 seconds."
::= { gs2310pplusNASConfiguration 5 }
gs2310pplusNASConfigHoldTime OBJECT-TYPE
SYNTAX Integer32(10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a client is denied access - either because the RADIUS server denies
the client access or because the RADIUS server request times out
- the client is put on hold in the Unauthorized state. The hold timer
does not count during an on-going authentication. In MAC-based Auth.
mode, the switch will ignore new frames coming from the client during
the hold time.
Admin State supported : Single, Multi and MAC-Based Auth. 802.1X.
range: 10 - 1000000 seconds."
::= { gs2310pplusNASConfiguration 6 }
gs2310pplusNASConfigRADIUSAssignedQoSEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS-assigned QoS provides a means to centrally control the
traffic class to which traffic coming from a successfully authenticated
supplicant is assigned on the switch. The RADIUS server must be configured
to transmit special RADIUS attributes to take advantage of this feature."
::= { gs2310pplusNASConfiguration 7 }
gs2310pplusNASConfigRADIUSAssignedVLANEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS-assigned VLAN provides a means to centrally control the VLAN on
which a successfully authenticated supplicant is placed on the switch.
Incoming traffic will be classified to and switched on the RADIUS-assigned
VLAN. The RADIUS server must be configured to transmit special RADIUS
attributes to take advantage of this feature.When enable, the individual
ports' ditto setting determine whether RADIUS-assigned VLAN is enabled
on that port. When disable, RADIUS-server assigned VLAN is disabled on
all ports. "
::= { gs2310pplusNASConfiguration 8 }
gs2310pplusNASConfigGuestVLANEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Guest VLAN is a special VLAN - typically with limited network access -
on which 802.1X-unaware clients are placed after a network administrator-defined
timeout. The switch follows a set of rules for entering and leaving the Guest
VLAN as listed below.When enable, the individual ports' ditto setting determines
whether the port can be moved into Guest VLAN. When disable, the ability to
move to the Guest VLAN is disabled on all ports. "
::= { gs2310pplusNASConfiguration 9 }
gs2310pplusNASConfigGuestVLANID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the value that a port's Port VLAN ID is set to if a port is moved into
the Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled.
range: 1 - 4094."
::= { gs2310pplusNASConfiguration 10 }
gs2310pplusNASConfigMaxReauthCount OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times the switch transmits an EAPOL Request Identity frame without
response before considering entering the Guest VLAN is adjusted with this setting.
The value can only be changed if the Guest VLAN option is globally enabled.
range: 1 - 255."
::= { gs2310pplusNASConfiguration 11 }
gs2310pplusNASConfigAllowGuestVLANEAPOLSeen OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch remembers if an EAPOL frame has been received on the port for the
life-time of the port. Once the switch considers whether to enter the Guest VLAN,
it will first check if this option is enabled or disabled. If disabled, the switch
will only enter the Guest VLAN if an EAPOL frame has not been received on the port
for the life-time of the port. If enabled (checked), the switch will consider
entering the Guest VLAN even if an EAPOL frame has been received on the port for
the life-time of the port.The value can only be changed if the Guest VLAN option
is globally enabled."
::= { gs2310pplusNASConfiguration 12 }
gs2310pplusNASConfigMacBasedUseEAP OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch can do the RADIUS authentication on behalf of the client in the
MAC-based Auth. port authentication mode. It can either present itself as a
normal 802.1X client to the RADIUS Server and use EAP, supporting only the
MD5-Challenge, or alternativly can use plain RADIUS with username / passwort
authentification without EAP if this setting is disabled."
::= { gs2310pplusNASConfiguration 101 }
gs2310pplusNASPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusNASPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2310pplusNASConfiguration 13 }
gs2310pplusNASPortConfigEntry OBJECT-TYPE
SYNTAX Gs2310pplusNASPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusNASPortConfigPort }
::= { gs2310pplusNASPortConfigTable 1 }
Gs2310pplusNASPortConfigEntry ::= SEQUENCE {
gs2310pplusNASPortConfigPort Integer32,
gs2310pplusNASPortConfigAdminState INTEGER,
gs2310pplusNASPortConfigRADIUSAssignedQoSEnabled INTEGER,
gs2310pplusNASPortConfigRADIUSAssignedVLANEnabled INTEGER,
gs2310pplusNASPortConfigGuestVLANEnabled INTEGER,
gs2310pplusNASPortConfigFallbackEnabled INTEGER,
gs2310pplusNASPortConfigPortState DisplayString,
gs2310pplusNASPortConfigReauthenticate INTEGER,
gs2310pplusNASPortConfigReinitialize INTEGER
}
gs2310pplusNASPortConfigPort OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2310pplusNASPortConfigEntry 1 }
gs2310pplusNASPortConfigAdminState OBJECT-TYPE
SYNTAX INTEGER{ forceAuthorized(1),
forceUnauthorized(2),
portBased(3),
single(4),
multi(5),
macBased(6),
macBasedSingle(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This selection controls the port's authentication mode.
1: Force Authorized,
2: Force Unauthorized,
3: Port-based 802.1X,
4: Single 802.1X,
5: Multi 802.1X,
6: MAC-based Auth,
7: MAC-based Single Auth."
::= { gs2310pplusNASPortConfigEntry 2 }
gs2310pplusNASPortConfigRADIUSAssignedQoSEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When RADIUS-Assigned QoS is both globally enabled and enabled (checked)
on a given port, the switch reacts to QoS Class information carried in
the RADIUS Access-Accept packet transmitted by the RADIUS server when a
supplicant is successfully authenticated. If present and valid, traffic
received on the supplicant's port will be classified to the given QoS Class.
Admin State supported : Port-based and Single 802.1X and MAC-based Single Auth."
::= { gs2310pplusNASPortConfigEntry 3 }
gs2310pplusNASPortConfigRADIUSAssignedVLANEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When RADIUS-Assigned VLAN is both globally enabled and enabled (checked)
for a given port, the switch reacts to VLAN ID information carried in the
RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant
is successfully authenticated. If present and valid, the port's Port VLAN ID
will be changed to this VLAN ID, the port will be set to be a member of that
VLAN ID, and the port will be forced into VLAN unaware mode. Once assigned,
all traffic arriving on the port will be classified and switched on the
RADIUS-assigned VLAN ID.
Admin State supported : Port-based and Single 802.1X and MAC-based Single Auth."
::= { gs2310pplusNASPortConfigEntry 4 }
gs2310pplusNASPortConfigGuestVLANEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When Guest VLAN is both globally enabled and enabled (checked) for a given port,
the switch considers moving the port into the Guest VLAN according to the rules
outlined below.
Admin State supported : Port-based , Single and Multi 802.1X."
::= { gs2310pplusNASPortConfigEntry 5 }
gs2310pplusNASPortConfigPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Globally Disabled: NAS is globally disabled.
Link Down: NAS is globally enabled, but there is no link on the port.
Authorized: The port is in Force Authorized or a single-supplicant mode
and the supplicant is authorized.
Unauthorized: The port is in Force Unauthorized or a single-supplicant
mode and the supplicant is not successfully authorized by the RADIUS server.
X Auth/Y Unauth: The port is in a multi-supplicant mode. Currently X clients
are authorized and Y are unauthorized."
::= { gs2310pplusNASPortConfigEntry 6 }
gs2310pplusNASPortConfigReauthenticate OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Schedules a reauthentication whenever the quiet-period of the port runs out
(EAPOL-based authentication). For MAC-based authentication, reauthentication
will be attempted immediately.The button only has effect for successfully
authenticated clients on the port and will not cause the clients to get
temporarily unauthorized."
::= { gs2310pplusNASPortConfigEntry 7 }
gs2310pplusNASPortConfigReinitialize OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces a reinitialization of the clients on the port and thereby a reauthentication
immediately. The clients will transfer to the unauthorized state while the
reauthentication is in progress."
::= { gs2310pplusNASPortConfigEntry 8 }
gs2310pplusNASPortConfigFallbackEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When Fallback is enabled, the switch will take over the supplicants role
after max reauthentication count is reached and tries to authenticate the
client on its behalf as described for MAC-based Auth.
Admin State supported : Single and Multi 802.1X."
::= { gs2310pplusNASPortConfigEntry 101 }
gs2310pplusNASSwitchStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusNASSwitchStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2310pplusNAS 2 }
gs2310pplusNASSwitchStatusEntry OBJECT-TYPE
SYNTAX Gs2310pplusNASSwitchStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusNASPortConfigPort }
::= { gs2310pplusNASSwitchStatusTable 1 }
Gs2310pplusNASSwitchStatusEntry ::= SEQUENCE {
gs2310pplusNASSwitchStatusAdminState DisplayString,
gs2310pplusNASSwitchStatusPortState DisplayString,
gs2310pplusNASSwitchStatusLastSource DisplayString,
gs2310pplusNASSwitchStatusLastID DisplayString,
gs2310pplusNASSwitchStatusQoSClass DisplayString,
gs2310pplusNASSwitchStatusPortVlanID DisplayString
}
gs2310pplusNASSwitchStatusAdminState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current administrative state. Refer to NAS Admin State for a description of possible values."
::= { gs2310pplusNASSwitchStatusEntry 2 }
gs2310pplusNASSwitchStatusPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the port. Refer to NAS Port State for a description of the individual states."
::= { gs2310pplusNASSwitchStatusEntry 3 }
gs2310pplusNASSwitchStatusLastSource OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication,
and the most recently received frame from a new client for MAC-based authentication."
::= { gs2310pplusNASSwitchStatusEntry 4 }
gs2310pplusNASSwitchStatusLastID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame
for EAPOL-based authentication, and the source MAC address from the most recently received frame from a
new client for MAC-based authentication."
::= { gs2310pplusNASSwitchStatusEntry 5 }
gs2310pplusNASSwitchStatusQoSClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QoS Class assigned to the port by the RADIUS server if enabled."
::= { gs2310pplusNASSwitchStatusEntry 6 }
gs2310pplusNASSwitchStatusPortVlanID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not overridden by NAS."
::= { gs2310pplusNASSwitchStatusEntry 7 }
gs2310pplusNASPortStatus OBJECT IDENTIFIER ::= { gs2310pplusNAS 3 }
gs2310pplusNASPortStatusCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusNASPortStatusCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2310pplusNASPortStatus 1 }
gs2310pplusNASPortStatusCountersEntry OBJECT-TYPE
SYNTAX Gs2310pplusNASPortStatusCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusNASPortConfigPort }
::= { gs2310pplusNASPortStatusCountersTable 1 }
Gs2310pplusNASPortStatusCountersEntry ::= SEQUENCE {
gs2310pplusNASRxCountersEAPOLTotal Counter32,
gs2310pplusNASRxCountersEAPOLResponseID Counter32,
gs2310pplusNASRxCountersEAPOLResponses Counter32,
gs2310pplusNASRxCountersEAPOLStart Counter32,
gs2310pplusNASRxCountersEAPOLLogoff Counter32,
gs2310pplusNASRxCountersEAPOLInvalidType Counter32,
gs2310pplusNASRxCountersEAPOLInvalidLength Counter32,
gs2310pplusNASTxCountersEAPOLTotal Counter32,
gs2310pplusNASTxCountersEAPOLRequestID Counter32,
gs2310pplusNASTxCountersEAPOLRequests Counter32,
gs2310pplusNASRxBackendServerCountersAccessChallenges Counter32,
gs2310pplusNASRxBackendServerCountersOtherRequests Counter32,
gs2310pplusNASRxBackendServerCountersAuthSuccesses Counter32,
gs2310pplusNASRxBackendServerCountersAuthFailures Counter32,
gs2310pplusNASTxBackendServerCountersResponses Counter32,
gs2310pplusNASLastSupplicantInfoMACAddress DisplayString,
gs2310pplusNASLastSupplicantInfoVlanID Integer32,
gs2310pplusNASLastSupplicantInfoVersion Integer32,
gs2310pplusNASLastSupplicantInfoIdentity DisplayString,
gs2310pplusNASCountersDoClear INTEGER
}
gs2310pplusNASRxCountersEAPOLTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL frames of any type that have been received by the switch."
::= { gs2310pplusNASPortStatusCountersEntry 2 }
gs2310pplusNASRxCountersEAPOLResponseID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Response Identity frames that have been received by the switch."
::= { gs2310pplusNASPortStatusCountersEntry 3 }
gs2310pplusNASRxCountersEAPOLResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL response frames (other than Response Identity frames)
that have been received by the switch."
::= { gs2310pplusNASPortStatusCountersEntry 4 }
gs2310pplusNASRxCountersEAPOLStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Start frames that have been received by the switch."
::= { gs2310pplusNASPortStatusCountersEntry 5 }
gs2310pplusNASRxCountersEAPOLLogoff OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Logoff frames that have been received by the switch."
::= { gs2310pplusNASPortStatusCountersEntry 6 }
gs2310pplusNASRxCountersEAPOLInvalidType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received by the switch in which
the frame type is not recognized."
::= { gs2310pplusNASPortStatusCountersEntry 7 }
gs2310pplusNASRxCountersEAPOLInvalidLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received by the switch in which the
Packet Body Length field is invalid."
::= { gs2310pplusNASPortStatusCountersEntry 8 }
gs2310pplusNASTxCountersEAPOLTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames of any type that have been transmitted by the switch."
::= { gs2310pplusNASPortStatusCountersEntry 9 }
gs2310pplusNASTxCountersEAPOLRequestID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Request Identity frames that have been transmitted by the switch."
::= { gs2310pplusNASPortStatusCountersEntry 10 }
gs2310pplusNASTxCountersEAPOLRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Request frames (other than Request Identity frames)
that have been transmitted by the switch."
::= { gs2310pplusNASPortStatusCountersEntry 11 }
gs2310pplusNASRxBackendServerCountersAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch receives the first request
from the backend server following the first response from the supplicant.
MAC-based: Counts all Access Challenges received from the backend server for this
port or client."
::= { gs2310pplusNASPortStatusCountersEntry 12 }
gs2310pplusNASRxBackendServerCountersOtherRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch sends an EAP Request
packet following the first to the supplicant.
MAC-based: Not applicable."
::= { gs2310pplusNASPortStatusCountersEntry 13 }
gs2310pplusNASRxBackendServerCountersAuthSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the switch receives a success indication.
Indicates that the supplicant/client has successfully authenticated to the
backend server."
::= { gs2310pplusNASPortStatusCountersEntry 14 }
gs2310pplusNASRxBackendServerCountersAuthFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the switch receives a failure message.
This indicates that the supplicant/client has not authenticated to the
backend server. "
::= { gs2310pplusNASPortStatusCountersEntry 15 }
gs2310pplusNASTxBackendServerCountersResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch attempts to
send a supplicant's first response packet to the backend server. Indicates
the switch attempted communication with the backend server. Possible
retransmissions are not counted.
MAC-based: Counts all the backend server packets sent from the switch
towards the backend server for a given port or client. Possible
retransmissions are not counted."
::= { gs2310pplusNASPortStatusCountersEntry 16 }
gs2310pplusNASLastSupplicantInfoMACAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the last supplicant/client."
::= { gs2310pplusNASPortStatusCountersEntry 17 }
gs2310pplusNASLastSupplicantInfoVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID on which the last frame from the last supplicant/client was received."
::= { gs2310pplusNASPortStatusCountersEntry 18 }
gs2310pplusNASLastSupplicantInfoVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: The protocol version number carried in the most recently
received EAPOL frame.
MAC-based: Not applicable."
::= { gs2310pplusNASPortStatusCountersEntry 19 }
gs2310pplusNASLastSupplicantInfoIdentity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: The user name (supplicant identity) carried in the most recently received
Response Identity EAPOL frame.
MAC-based: Not applicable."
::= { gs2310pplusNASPortStatusCountersEntry 20 }
gs2310pplusNASCountersDoClear OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the counters for the selected port."
::= { gs2310pplusNASPortStatusCountersEntry 21 }
gs2310pplusNASPortStatusClientsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2310pplusNASPortStatusClientsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2310pplusNASPortStatus 2 }
gs2310pplusNASPortStatusClientsEntry OBJECT-TYPE
SYNTAX Gs2310pplusNASPortStatusClientsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2310pplusNASPortConfigPort,
gs2310pplusNASClientsIndex}
::= { gs2310pplusNASPortStatusClientsTable 1 }
Gs2310pplusNASPortStatusClientsEntry ::= SEQUENCE {
gs2310pplusNASClientsIndex Integer32,
gs2310pplusNASClientsIdentity DisplayString,
gs2310pplusNASClientsMACAddress DisplayString,
gs2310pplusNASClientsVlanID Integer32,
gs2310pplusNASClientsState DisplayString,
gs2310pplusNASClientsLastAuth DisplayString,
gs2310pplusNASRxClientsEAPOLTotal Counter32,
gs2310pplusNASRxClientsEAPOLResponseID Counter32,
gs2310pplusNASRxClientsEAPOLResponses Counter32,
gs2310pplusNASRxClientsEAPOLStart Counter32,
gs2310pplusNASRxClientsEAPOLLogoff Counter32,
gs2310pplusNASRxClientsEAPOLInvalidType Counter32,
gs2310pplusNASRxClientsEAPOLInvalidLength Counter32,
gs2310pplusNASTxClientsEAPOLTotal Counter32,
gs2310pplusNASTxClientsEAPOLRequestID Counter32,
gs2310pplusNASTxClientsEAPOLRequests Counter32,
gs2310pplusNASRxBackendServerClientsAccessChallenges Counter32,
gs2310pplusNASRxBackendServerClientsOtherRequests Counter32,
gs2310pplusNASRxBackendServerClientsAuthSuccesses Counter32,
gs2310pplusNASRxBackendServerClientsAuthFailures Counter32,
gs2310pplusNASTxBackendServerClientsResponses Counter32
}
gs2310pplusNASClientsIndex OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of client table in the port."
::= { gs2310pplusNASPortStatusClientsEntry 1 }
gs2310pplusNASClientsIdentity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the identity of the supplicant, as received in the Response Identity
EAPOL frame.This isn't available for MAC-based Auth."
::= { gs2310pplusNASPortStatusClientsEntry 2 }
gs2310pplusNASClientsMACAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multi 802.1X, this column holds the MAC address of the attached supplicant.
MAC-based Auth., this column holds the MAC address of the attached client."
::= { gs2310pplusNASPortStatusClientsEntry 3 }
gs2310pplusNASClientsVlanID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This column holds the VLAN ID that the corresponding client is currently
secured through the Port Security module."
::= { gs2310pplusNASPortStatusClientsEntry 4 }
gs2310pplusNASClientsState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client can either be authenticated or unauthenticated. In the authenticated
state, it is allowed to forward frames on the port, and in the unauthenticated
state, it is blocked."
::= { gs2310pplusNASPortStatusClientsEntry 5 }
gs2310pplusNASClientsLastAuth OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the date and time of the last authentication of the client."
::= { gs2310pplusNASPortStatusClientsEntry 6 }
gs2310pplusNASRxClientsEAPOLTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL frames of any type that have been received by the switch."
::= { gs2310pplusNASPortStatusClientsEntry 7 }
gs2310pplusNASRxClientsEAPOLResponseID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Response Identity frames that have been received by the switch."
::= { gs2310pplusNASPortStatusClientsEntry 8 }
gs2310pplusNASRxClientsEAPOLResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL response frames (other than Response Identity frames)
that have been received by the switch."
::= { gs2310pplusNASPortStatusClientsEntry 9 }
gs2310pplusNASRxClientsEAPOLStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Start frames that have been received by the switch."
::= { gs2310pplusNASPortStatusClientsEntry 10 }
gs2310pplusNASRxClientsEAPOLLogoff OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Logoff frames that have been received by the switch."
::= { gs2310pplusNASPortStatusClientsEntry 11 }
gs2310pplusNASRxClientsEAPOLInvalidType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received by the switch in which
the frame type is not recognized."
::= { gs2310pplusNASPortStatusClientsEntry 12 }
gs2310pplusNASRxClientsEAPOLInvalidLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received by the switch in which the
Packet Body Length field is invalid."
::= { gs2310pplusNASPortStatusClientsEntry 13 }
gs2310pplusNASTxClientsEAPOLTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames of any type that have been transmitted by the switch."
::= { gs2310pplusNASPortStatusClientsEntry 14 }
gs2310pplusNASTxClientsEAPOLRequestID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Request Identity frames that have been transmitted by the switch."
::= { gs2310pplusNASPortStatusClientsEntry 15 }
gs2310pplusNASTxClientsEAPOLRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Request frames (other than Request Identity frames)
that have been transmitted by the switch."
::= { gs2310pplusNASPortStatusClientsEntry 16 }
gs2310pplusNASRxBackendServerClientsAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch receives the first request
from the backend server following the first response from the supplicant.
MAC-based: Counts all Access Challenges received from the backend server for this
port or client."
::= { gs2310pplusNASPortStatusClientsEntry 17 }
gs2310pplusNASRxBackendServerClientsOtherRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch sends an EAP Request
packet following the first to the supplicant.
MAC-based: Not applicable."
::= { gs2310pplusNASPortStatusClientsEntry 18 }
gs2310pplusNASRxBackendServerClientsAuthSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the switch receives a success indication.
Indicates that the supplicant/client has successfully authenticated to the
backend server."
::= { gs2310pplusNASPortStatusClientsEntry 19 }
gs2310pplusNASRxBackendServerClientsAuthFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the switch receives a failure message.
This indicates that the supplicant/client has not authenticated to the
backend server. "
::= { gs2310pplusNASPortStatusClientsEntry 20 }
gs2310pplusNASTxBackendServerClientsResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch attempts to
send a supplicant's first response packet to the backend server. Indicates
the switch attempted communication with the backend server. Possible
retransmissions are not counted.
MAC-based: Counts all the backend server packets sent from the switch
towards the backend server for a given port or client. Possible
retransmissions are not counted."
::= { gs2310pplusNASPortStatusClientsEntry 21 }
gs2310pplusMaintenance OBJECT IDENTIFIER ::= { lancomGS2310PPLUS 4 }
gs2310pplusRestartDevice OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2310pplusMaintenance 1 }
gs2310pplusColdRestartDevice OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2310pplusMaintenance 1500 }
gs2310pplusFirmware OBJECT IDENTIFIER ::= { gs2310pplusMaintenance 2 }
gs2310pplusFirmwareIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the firmware tftp server."
::= { gs2310pplusFirmware 1 }
gs2310pplusFirmwareFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the path and filename for firmware upgrading."
::= { gs2310pplusFirmware 2 }
gs2310pplusDoFirmwareUpgrade OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do firmware upgrade. Get this OID always return zero.
1 - do firmware upgrade.
0 - do nothing."
::= { gs2310pplusFirmware 3 }
gs2310pplusSaveOrRestore OBJECT IDENTIFIER ::= { gs2310pplusMaintenance 3 }
gs2310pplusFactoryDefaults OBJECT-TYPE
SYNTAX INTEGER { none(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2310pplusSaveOrRestore 1 }
gs2310pplusSaveStart OBJECT-TYPE
SYNTAX INTEGER { none(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2310pplusSaveOrRestore 2 }
gs2310pplusSaveUser OBJECT-TYPE
SYNTAX INTEGER { none(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2310pplusSaveOrRestore 3 }
gs2310pplusRestoreUser OBJECT-TYPE
SYNTAX INTEGER { none(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2310pplusSaveOrRestore 4 }
gs2310pplusExportOrImport OBJECT IDENTIFIER ::= { gs2310pplusMaintenance 4 }
gs2310pplusExportIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the export tftp server."
::= { gs2310pplusExportOrImport 1 }
gs2310pplusExportConfigName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the export file path and name."
::= { gs2310pplusExportOrImport 2 }
gs2310pplusDoExportConfig OBJECT-TYPE
SYNTAX INTEGER{ doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do export-config.
Get this OID always return zero.
1 - export."
::= { gs2310pplusExportOrImport 3 }
gs2310pplusImportIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the import tftp server."
::= { gs2310pplusExportOrImport 4 }
gs2310pplusImportConfigName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the import file path and name."
::= { gs2310pplusExportOrImport 5 }
gs2310pplusDoImportConfig OBJECT-TYPE
SYNTAX INTEGER{ doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do export-config.
Get this OID always return zero.
1 - import."
::= { gs2310pplusExportOrImport 6 }
gs2310pplusDiagnostics OBJECT IDENTIFIER ::= { gs2310pplusMaintenance 5 }
gs2310pplusPingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The destination IP Address. "
::= { gs2310pplusDiagnostics 1 }
gs2310pplusPingSize OBJECT-TYPE
SYNTAX Integer32(60..1400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Size of ICMP echo packet.
range : 60-1400, default : 64. "
::= { gs2310pplusDiagnostics 2 }
gs2310pplusDoPingConfig OBJECT-TYPE
SYNTAX INTEGER{ doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway. "
::= { gs2310pplusDiagnostics 3 }
gs2310pplusPingResult OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Show ping result. "
::= { gs2310pplusDiagnostics 4 }
gs2310pplusPing6IpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The destination IPv6 Address. "
::= { gs2310pplusDiagnostics 5 }
gs2310pplusPing6Size OBJECT-TYPE
SYNTAX Integer32(60..1400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Size of ICMP echo packet.
range : 60-1400. "
::= { gs2310pplusDiagnostics 6 }
gs2310pplusDoPing6Config OBJECT-TYPE
SYNTAX INTEGER{ doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway. "
::= { gs2310pplusDiagnostics 7 }
gs2310pplusPing6Result OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Show ping result. "
::= { gs2310pplusDiagnostics 8 }
------------------------------------------------------------------------------------------------------------------
gs2310pplusTrap OBJECT IDENTIFIER ::= { lancomGS2310PPLUS 5 }
gs2310pplusTrapEvent OBJECT IDENTIFIER ::= { gs2310pplusTrap 1 }
gs2310pplusEmergency NOTIFICATION-TYPE
OBJECTS { gs2310pplusInformation }
STATUS current
DESCRIPTION
"The severity level is Emergency. The system is unusable."
::= { gs2310pplusTrapEvent 1 }
gs2310pplusAlert NOTIFICATION-TYPE
OBJECTS { gs2310pplusInformation }
STATUS current
DESCRIPTION
"The severity level is Alert. The action must be taken immediately."
::= { gs2310pplusTrapEvent 2 }
gs2310pplusCritical NOTIFICATION-TYPE
OBJECTS { gs2310pplusInformation }
STATUS current
DESCRIPTION
"The severity level is Critical. Critical conditions."
::= { gs2310pplusTrapEvent 3 }
gs2310pplusError NOTIFICATION-TYPE
OBJECTS { gs2310pplusInformation }
STATUS current
DESCRIPTION
"The severity level is Error. Error conditions."
::= { gs2310pplusTrapEvent 4 }
gs2310pplusWarning NOTIFICATION-TYPE
OBJECTS { gs2310pplusInformation }
STATUS current
DESCRIPTION
"The severity level is Warning. Warning conditions."
::= { gs2310pplusTrapEvent 5 }
gs2310pplusNotice NOTIFICATION-TYPE
OBJECTS { gs2310pplusInformation }
STATUS current
DESCRIPTION
"The severity level is Notice. Normal but significant condition."
::= { gs2310pplusTrapEvent 6 }
gs2310pplusInformational NOTIFICATION-TYPE
OBJECTS { gs2310pplusInformation }
STATUS current
DESCRIPTION
"The severity level is Informational. Informational messages."
::= { gs2310pplusTrapEvent 7 }
gs2310pplusDebug NOTIFICATION-TYPE
OBJECTS { gs2310pplusInformation }
STATUS current
DESCRIPTION
"The severity level is Debug. debug-level messages."
::= { gs2310pplusTrapEvent 8 }
gs2310pplusTrapVariable OBJECT IDENTIFIER ::= { gs2310pplusTrap 2 }
gs2310pplusInformation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trap information."
::= { gs2310pplusTrapVariable 1 }
END
View Git Blame Copy Permalink