WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/lancom/LANCOM-GS-2326PLUS-MIB

15945 lines
494 KiB
Plaintext
Raw Blame History

LANCOM-GS-2326PLUS-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString,MacAddress FROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
ifIndex FROM RFC1213-MIB
enterprises,MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,Counter32,Counter64,IpAddress FROM SNMPv2-SMI
InetAddress FROM INET-ADDRESS-MIB
MacAddress FROM BRIDGE-MIB;
lancom-systems MODULE-IDENTITY
LAST-UPDATED "202002190000Z"
ORGANIZATION "LANCOM Systems GmbH."
CONTACT-INFO
"Adenauerstrasse 20 / B2, 52146 Wuerselen, Germany
Email: info@lancom.de
TEL: +49 (0)2405 49936 0
FAX: +49 (0)2405 49936 99"
DESCRIPTION
"The MIB module is for LANCOM Systems"
::= { enterprises 2356 }
switchingSystems OBJECT IDENTIFIER ::= { lancom-systems 800 }
gigabitEthernetSwitches OBJECT IDENTIFIER ::= { switchingSystems 3 }
lancomGS2326plus OBJECT IDENTIFIER ::= { gigabitEthernetSwitches 2329 }
gs2326plusSystem OBJECT IDENTIFIER ::= { lancomGS2326plus 1 }
gs2326plusSystemInformation OBJECT IDENTIFIER ::= { gs2326plusSystem 1 }
gs2326plusModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 1 }
gs2326plusBIOSVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 2 }
gs2326plusFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 3 }
gs2326plusHardwareMechanicalVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 4 }
gs2326plusSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 5 }
gs2326plusHostMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 6 }
gs2326plusConsoleBaudrate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 7 }
gs2326plusRAMSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 8 }
gs2326plusFlashSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 9 }
gs2326plusBridgeFDBSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 10 }
gs2326plusTransmitQueue OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 11 }
gs2326plusMaximumFrameSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 12 }
gs2326plusCPULoad OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 13 }
gs2326plusSystemDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 21 }
gs2326plusLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 22 }
gs2326plusContact OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 23 }
gs2326plusDeviceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 24 }
gs2326plusSystemDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 25 }
gs2326plusSystemUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 26 }
gs2326plusSystemIPv4Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 27 }
gs2326plusSystemIPv4SubnetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 28 }
gs2326plusSystemIPv4Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 29 }
gs2326plusIPv6LinkLocalAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 30 }
gs2326plusIPv6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 31 }
gs2326plusIPv6Prefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 32 }
gs2326plusIPv6Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusSystemInformation 33 }
gs2326plusLargestFreeMemBlock OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Largest free memory block in Kb"
::= { gs2326plusSystemInformation 1500 }
gs2326plusMemFree OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free memory in Kb"
::= { gs2326plusSystemInformation 1501 }
gs2326plusSystemTime OBJECT IDENTIFIER ::= { gs2326plusSystem 2 }
gs2326plusSystemTimeManual OBJECT IDENTIFIER ::= { gs2326plusSystemTime 1 }
gs2326plusSystemTimeManualClockSource OBJECT-TYPE
SYNTAX INTEGER {useLocal(0),useNTP(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0 : Use Local Settings,
1 : Use NTP Server."
::= { gs2326plusSystemTimeManual 1 }
gs2326plusSystemTimeManualLocaltime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the system time of the device.
The input format is 'Year-Month-Day Hour:Minute:Second'.
ex: 2011-01-01 05:43:05 means 2011/1/1 - 05:43:05 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59,
Sec : 0 - 59."
::= { gs2326plusSystemTimeManual 2 }
gs2326plusSystemTimeManualTimeZoneOffset OBJECT-TYPE
SYNTAX INTEGER(-720..780)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Time Zone.
The value range is between -720 and 780 (minutes)."
::= { gs2326plusSystemTimeManual 3 }
gs2326plusSystemTimeManualDaylightSavings OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0 : Disable,
1 : Enable."
::= { gs2326plusSystemTimeManual 4 }
gs2326plusSystemTimeManualTimeSetOffset OBJECT-TYPE
SYNTAX Integer32(1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time.
The value range is between 1 and 1440 (minutes),
Default : 60 (minutes)."
::= { gs2326plusSystemTimeManual 5 }
gs2326plusSystemTimeManualDaylightSavingsType OBJECT-TYPE
SYNTAX INTEGER { byDates(0), recurring(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0 : By dates,
1 : Recurring."
::= { gs2326plusSystemTimeManual 6 }
gs2326plusSystemTimeManualDaylightSavingsBydatesFrom OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Start time of By dates Daylight Savings.
The input format is 'Year-Month-Day Hour:Minute'.
ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59."
::= { gs2326plusSystemTimeManual 7 }
gs2326plusSystemTimeManualDaylightSavingsBydatesTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the End time of By dates Daylight Savings.
The input format is 'Year-Month-Day Hour:Minute'.
ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59."
::= { gs2326plusSystemTimeManual 8 }
gs2326plusSystemTimeManualDaylightSavingsRecurringDayFrom OBJECT-TYPE
SYNTAX INTEGER {
sunday(0),
monday(1),
tuseday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Day From.
0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat."
::= { gs2326plusSystemTimeManual 9 }
gs2326plusSystemTimeManualDaylightSavingsRecurringWeekFrom OBJECT-TYPE
SYNTAX INTEGER{
firstWeek(1),
secondWeek(2),
thirdWeek(3),
fourthWeek(4),
listWeek(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Week From.
1 : first week, 2, 3, 4, 5 : last week"
::= { gs2326plusSystemTimeManual 10 }
gs2326plusSystemTimeManualDaylightSavingsRecurringMonthFrom OBJECT-TYPE
SYNTAX INTEGER {
jan(1),
feb(2),
mar(3),
apr(4),
may(5),
jun(6),
jul(7),
aug(8),
sep(9),
oct(10),
nov(11),
dec(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Month From.
1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun,
7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec."
::= { gs2326plusSystemTimeManual 11 }
gs2326plusSystemTimeManualDaylightSavingsRecurringTimeFrom OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Start time of By dates Daylight Savings.
The input format is 'Hour:Minute'.
ex: 05:43.
The value range:
Hour : 0 - 23,
Minute : 0 - 59."
::= { gs2326plusSystemTimeManual 12 }
gs2326plusSystemTimeManualDaylightSavingsRecurringDayTo OBJECT-TYPE
SYNTAX INTEGER {
sunday(0),
monday(1),
tuseday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Day To.
0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat."
::= { gs2326plusSystemTimeManual 13 }
gs2326plusSystemTimeManualDaylightSavingsRecurringWeekTo OBJECT-TYPE
SYNTAX INTEGER{
firstWeek(1),
secondWeek(2),
thirdWeek(3),
fourthWeek(4),
listWeek(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Week To.
1 : first week, 2, 3, 4, 5 : last week"
::= { gs2326plusSystemTimeManual 14 }
gs2326plusSystemTimeManualDaylightSavingsRecurringMonthTo OBJECT-TYPE
SYNTAX INTEGER {
jan(1),
feb(2),
mar(3),
apr(4),
may(5),
jun(6),
jul(7),
aug(8),
sep(9),
oct(10),
nov(11),
dec(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Daylight Saving Time Month To.
1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun,
7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec."
::= { gs2326plusSystemTimeManual 15 }
gs2326plusSystemTimeManualDaylightSavingsRecurringTimeTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Start time of By dates Daylight Savings.
The input format is 'Hour:Minute'.
ex: 05:43.
The value range:
Hour : 0 - 23,
Minute : 0 - 59."
::= { gs2326plusSystemTimeManual 16 }
gs2326plusSystemTimeNTP OBJECT IDENTIFIER ::= { gs2326plusSystemTime 2 }
gs2326plusSystemTimeNTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSystemTimeNTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSystemTimeNTP 1 }
gs2326plusSystemTimeNTPEntry OBJECT-TYPE
SYNTAX Gs2326plusSystemTimeNTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSystemTimeNTPIndex }
::= { gs2326plusSystemTimeNTPTable 1 }
Gs2326plusSystemTimeNTPEntry ::= SEQUENCE {
gs2326plusSystemTimeNTPIndex Integer32,
gs2326plusSystemTimeNTPServerIPType INTEGER,
gs2326plusSystemTimeNTPServer DisplayString,
gs2326plusSystemTimeNTPCurrentMode INTEGER
}
gs2326plusSystemTimeNTPIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of the ntp entry. "
::= { gs2326plusSystemTimeNTPEntry 1 }
gs2326plusSystemTimeNTPServerIPType OBJECT-TYPE
SYNTAX INTEGER { ipv4(0), ipv6(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default: 0,
0 : IPv4,
1 : IPv6."
::= { gs2326plusSystemTimeNTPEntry 2 }
gs2326plusSystemTimeNTPServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Time Server1. You can use the IP address or domain name."
::= { gs2326plusSystemTimeNTPEntry 3 }
gs2326plusSystemTimeNTPCurrentMode OBJECT-TYPE
SYNTAX INTEGER { empty(0), active(1), edit(2), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: Empty
1: Active
2: Edit
3: Delete"
::= { gs2326plusSystemTimeNTPEntry 4 }
gs2326plusSystemTimeNTPRequestInterval OBJECT-TYPE
SYNTAX INTEGER(60..999999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Request Interval.
Default : 86400.
The value range is between 60 and 999999999 (seconds)."
::= { gs2326plusSystemTimeNTP 2 }
gs2326plusSystemTimeNTPTriesNumber OBJECT-TYPE
SYNTAX INTEGER(0..999999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Number of tries.
Default : 4.
The value range is between 0 and 999999999."
::= { gs2326plusSystemTimeNTP 3 }
gs2326plusSystemAccount OBJECT IDENTIFIER ::= { gs2326plusSystem 3 }
gs2326plusSystemAccountUsers OBJECT IDENTIFIER ::= { gs2326plusSystemAccount 1 }
gs2326plusSystemAccountUserCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create a user account"
::= { gs2326plusSystemAccountUsers 1 }
gs2326plusSystemAccountUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSystemAccountUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSystemAccountUsers 2 }
gs2326plusSystemAccountUsersEntry OBJECT-TYPE
SYNTAX Gs2326plusSystemAccountUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusUserIndex }
::= { gs2326plusSystemAccountUsersTable 1 }
Gs2326plusSystemAccountUsersEntry ::= SEQUENCE {
gs2326plusUserIndex Integer32 ,
gs2326plusUserName DisplayString,
gs2326plusPassword DisplayString,
gs2326plusUserPrivilegeLevel Integer32 ,
gs2326plusAccountUserRowStatus INTEGER
}
gs2326plusUserIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSystemAccountUsersEntry 1 }
gs2326plusUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Please use a combination of letters, numbers and underscores"
::= { gs2326plusSystemAccountUsersEntry 2 }
gs2326plusPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Please use ASCII printable code except Quotation mark, Colon (punctuation), Less-than sign, Greater-than sign, At sign, Question mark and Space (punctuation)"
::= { gs2326plusSystemAccountUsersEntry 3 }
gs2326plusUserPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:1
User privilege level range : 1 - 15"
::= { gs2326plusSystemAccountUsersEntry 4 }
gs2326plusAccountUserRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2326plusSystemAccountUsersEntry 5 }
gs2326plusSystemAccountUsersSuperUserPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Super-User Password"
::= { gs2326plusSystemAccountUsers 1500 }
gs2326plusSystemAccountEnforcePasswordRules OBJECT-TYPE
SYNTAX INTEGER { yes(0), no(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : Do not enforce rules
1 : enforce rules"
::= { gs2326plusSystemAccountUsers 1501 }
gs2326plusSystemAccountPrivilegeLevel OBJECT IDENTIFIER ::= { gs2326plusSystemAccount 2 }
gs2326plusAccountPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 1 }
gs2326plusAggregationPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 2 }
gs2326plusDiagnosticsPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 3 }
gs2326plusEEEPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 4 }
gs2326plusEasyportPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 9 }
gs2326plusGARPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 10 }
gs2326plusGVRPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 11 }
gs2326plusIPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 12 }
gs2326plusIPMCSnoopingPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 13 }
gs2326plusLACPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 14 }
gs2326plusLLDPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 15 }
gs2326plusLLDPMEDPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 16 }
gs2326plusLoopProtectPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 17 }
gs2326plusMACTablePrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 18 }
gs2326plusMVRPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 22 }
gs2326plusMaintenancePrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 24 }
gs2326plusMirroringPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 25 }
gs2326plusPortsPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 27 }
gs2326plusPrivateVLANsPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 28 }
gs2326plusQoSPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 29 }
gs2326plusSFlowPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 30 }
gs2326plusSMTPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 31 }
gs2326plusSNMPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 32 }
gs2326plusSecurityPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 33 }
gs2326plusSingleIPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 34 }
gs2326plusSpanningTreePrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 35 }
gs2326plusSystemPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 36 }
gs2326plusTrapEventPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 37 }
gs2326plusUPnPPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 38 }
gs2326plusVCLPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 39 }
gs2326plusVLANsPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 41 }
gs2326plusVoiceVLANPrivilegeLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default:15, Range : 1-15. "
::= { gs2326plusSystemAccountPrivilegeLevel 42 }
gs2326plusIP OBJECT IDENTIFIER ::= { gs2326plusSystem 4 }
gs2326plusIPv4 OBJECT IDENTIFIER ::= { gs2326plusIP 1 }
gs2326plusIPv4Configured OBJECT IDENTIFIER ::= { gs2326plusIPv4 1 }
gs2326plusIpv4DHCPClient OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:0
0: disable
1: enable"
::= { gs2326plusIPv4Configured 1 }
gs2326plusIPv4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv4Configured 2 }
gs2326plusIPv4Mask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv4Configured 3 }
gs2326plusIPv4Gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv4Configured 4 }
gs2326plusIPv4VLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:1"
::= { gs2326plusIPv4Configured 5 }
gs2326plusIPv4DNSServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv4Configured 6 }
gs2326plusIPv4DNSProxy OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:disable, 1:enable "
::= { gs2326plusIPv4Configured 7 }
gs2326plusIPv4Current OBJECT IDENTIFIER ::= { gs2326plusIPv4 2 }
gs2326plusIpv4CurrentDHCPClient OBJECT-TYPE
SYNTAX INTEGER { none(0), renew(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:0
0: none (for read)
1: renew"
::= { gs2326plusIPv4Current 1 }
gs2326plusIPv4CurrentAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv4Current 2 }
gs2326plusIPv4CurrentMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv4Current 3 }
gs2326plusIPv4CurrentGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv4Current 4 }
gs2326plusIPv4CurrentVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"default:1"
::= { gs2326plusIPv4Current 5 }
gs2326plusIPv4CurrentDNSServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv4Current 6 }
gs2326plusIPv6 OBJECT IDENTIFIER ::= { gs2326plusIP 2 }
gs2326plusIPv6Configured OBJECT IDENTIFIER ::= { gs2326plusIPv6 1 }
gs2326plusIpv6AutoConfiguration OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default:0
0: disable
1: enable"
::= { gs2326plusIPv6Configured 1 }
gs2326plusIpv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv6Configured 2 }
gs2326plusIpv6Prefix OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 96"
::= { gs2326plusIPv6Configured 3 }
gs2326plusIpv6Gateway OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPv6Configured 4 }
gs2326plusIPv6Current OBJECT IDENTIFIER ::= { gs2326plusIPv6 2 }
gs2326plusIpv6CurrentAutoConfiguration OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"default:0
0: disable
1: enable"
::= { gs2326plusIPv6Current 1 }
gs2326plusIpv6CurrentAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv6Current 2 }
gs2326plusIpv6CurrentLinkLocalAddress OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv6Current 3 }
gs2326plusIpv6CurrentPrefix OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusIPv6Current 4 }
gs2326plusIpv6CurrentGateway OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPv6Current 5 }
gs2326plusSyslog OBJECT IDENTIFIER ::= { gs2326plusSystem 5 }
gs2326plusSyslogConf OBJECT IDENTIFIER ::= { gs2326plusSyslog 1 }
gs2326plusServerMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusSyslogConf 1 }
gs2326plusServerAddress1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2326plusSyslogConf 2 }
gs2326plusServerAddress2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2326plusSyslogConf 3 }
gs2326plusSyslogLevel OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 6 (Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusSyslogConf 4 }
gs2326plusSyslogDetailedInfo OBJECT IDENTIFIER ::= { gs2326plusSyslog 2 }
gs2326plusSyslogDetailedInfoClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Clear Syslog"
::= { gs2326plusSyslogDetailedInfo 1 }
gs2326plusSyslogDetailedInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSyslogDetailedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSyslogDetailedInfo 2 }
gs2326plusSyslogDetailedInfoEntry OBJECT-TYPE
SYNTAX Gs2326plusSyslogDetailedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSyslogDetailedInfoIndex }
::= { gs2326plusSyslogDetailedInfoTable 1 }
Gs2326plusSyslogDetailedInfoEntry ::= SEQUENCE {
gs2326plusSyslogDetailedInfoIndex Integer32,
gs2326plusSyslogDetailedInfoLevel DisplayString,
gs2326plusSyslogDetailedInfoTime DisplayString,
gs2326plusSyslogDetailedInfoMessage DisplayString
}
gs2326plusSyslogDetailedInfoIndex OBJECT-TYPE
SYNTAX Integer32(1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSyslogDetailedInfoEntry 1 }
gs2326plusSyslogDetailedInfoLevel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSyslogDetailedInfoEntry 2 }
gs2326plusSyslogDetailedInfoTime OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSyslogDetailedInfoEntry 3 }
gs2326plusSyslogDetailedInfoMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSyslogDetailedInfoEntry 4 }
gs2326plusSnmp OBJECT IDENTIFIER ::= { gs2326plusSystem 6 }
gs2326plusSnmpConf OBJECT IDENTIFIER ::= { gs2326plusSnmp 1 }
gs2326plusGetCommunityMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the get-community mode of the SNMP.
default : 1, 0: disable, 1: enable. "
::= { gs2326plusSnmpConf 1 }
gs2326plusGetCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the get-community of the SNMP."
::= { gs2326plusSnmpConf 2 }
gs2326plusSetCommunityMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the set-community mode of the SNMP.
default : 1, 0: disable, 1: enable. "
::= { gs2326plusSnmpConf 3 }
gs2326plusSetCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the set-community of the SNMP."
::= { gs2326plusSnmpConf 4 }
gs2326plusGetCommunityConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSGetCommunityConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show get-community of the SNMP. "
::= { gs2326plusSnmpConf 5 }
gs2326plusGetCommunityConfEntry OBJECT-TYPE
SYNTAX GS2326PLUSGetCommunityConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusCommunityConfIndex }
::= { gs2326plusGetCommunityConfTable 1 }
GS2326PLUSGetCommunityConfEntry ::= SEQUENCE {
gs2326plusCommunityConfIndex Integer32,
gs2326plusCommunityConfGetCommunity DisplayString
}
gs2326plusCommunityConfIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" index, range : 1 - 5. "
::= { gs2326plusGetCommunityConfEntry 1 }
gs2326plusCommunityConfGetCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Get/Set the get-community of the SNMP."
::= { gs2326plusGetCommunityConfEntry 2 }
gs2326plusTrapHostConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSTrapHostConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of trap host entry. The numbers of entries are given by the value of gs2326plusTrapHostConfNumber."
::= { gs2326plusSnmpConf 6 }
gs2326plusTrapHostConfEntry OBJECT-TYPE
SYNTAX GS2326PLUSTrapHostConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the entry information for trap host."
INDEX { gs2326plusTrapHostConfIndex }
::= { gs2326plusTrapHostConfTable 1 }
GS2326PLUSTrapHostConfEntry ::= SEQUENCE {
gs2326plusTrapHostConfIndex Integer32,
gs2326plusTrapHostConfVersion INTEGER,
gs2326plusTrapHostConfIPType INTEGER,
gs2326plusTrapHostConfIP DisplayString,
gs2326plusTrapHostConfPort Integer32,
gs2326plusTrapHostConfCommunity DisplayString,
gs2326plusTrapHostConfSeverityLevel INTEGER,
gs2326plusTrapHostConfSecurityLevel INTEGER,
gs2326plusTrapHostConfAuthPtc INTEGER,
gs2326plusTrapHostConfAuthPassword DisplayString,
gs2326plusTrapHostConfPrivPtc INTEGER,
gs2326plusTrapHostConfPrivPassword DisplayString,
gs2326plusTrapHostConfCurrentMode INTEGER
}
gs2326plusTrapHostConfIndex OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of the trap host entry. "
::= { gs2326plusTrapHostConfEntry 1 }
gs2326plusTrapHostConfVersion OBJECT-TYPE
SYNTAX INTEGER { snmpv2c(2), snmpv3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)"
::= { gs2326plusTrapHostConfEntry 2 }
gs2326plusTrapHostConfIPType OBJECT-TYPE
SYNTAX INTEGER { ipv4(4), ipv6(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Server IP Type. Default: 4,
4 : IPv4,
6 : IPv6."
::= { gs2326plusTrapHostConfEntry 3 }
gs2326plusTrapHostConfIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP of the trap host."
::= { gs2326plusTrapHostConfEntry 4 }
gs2326plusTrapHostConfPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the receiving-port number of the trap host.
range : 1 - 65535."
::= { gs2326plusTrapHostConfEntry 5 }
gs2326plusTrapHostConfCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The community/security name for the trap PDU."
::= { gs2326plusTrapHostConfEntry 6 }
gs2326plusTrapHostConfSeverityLevel OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Severity Level.
0 : Emerg, 1 : Alert, 2 : Critical, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug."
::= { gs2326plusTrapHostConfEntry 7 }
gs2326plusTrapHostConfSecurityLevel OBJECT-TYPE
SYNTAX INTEGER { noAuthNoPriv(1), authNoPriv(2), authPriv(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv.
1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv.
Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv)."
::= { gs2326plusTrapHostConfEntry 8 }
gs2326plusTrapHostConfAuthPtc OBJECT-TYPE
SYNTAX INTEGER { md5(1), sha(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Protocol, there are SHA and MD5 supported presently.
1 : MD5, 2 : SHA."
::= { gs2326plusTrapHostConfEntry 9 }
gs2326plusTrapHostConfAuthPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters.
If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters."
::= { gs2326plusTrapHostConfEntry 10 }
gs2326plusTrapHostConfPrivPtc OBJECT-TYPE
SYNTAX INTEGER { des(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Privacy Protocol, which is used in AuthPriv. Only supports DES.
An empty string will be returned if the security level is not 3(AuthPriv).
1 : DES."
::= { gs2326plusTrapHostConfEntry 11 }
gs2326plusTrapHostConfPrivPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters."
::= { gs2326plusTrapHostConfEntry 12 }
gs2326plusTrapHostConfCurrentMode OBJECT-TYPE
SYNTAX INTEGER { empty(0), active(1), edit(2), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:Empty, 1:Active mode, 2:Edit mode, 3:Delete."
::= { gs2326plusTrapHostConfEntry 13 }
gs2326plusSnmpSystem OBJECT IDENTIFIER ::= { gs2326plusSnmp 2 }
gs2326plusSnmpState OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the state of the SNMP.
default : 1, 0: disable, 1: enable. "
::= { gs2326plusSnmpSystem 1 }
gs2326plusSnmpEngineID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(5..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Engine ID of the SNMP.
An SNMP engine's administratively-unique identifier."
::= { gs2326plusSnmpSystem 2 }
gs2326plusSnmpCommunities OBJECT IDENTIFIER ::= { gs2326plusSnmp 3 }
gs2326plusSnmpCommunitiesCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2326plusSnmpCommunities 1 }
gs2326plusSnmpCommunitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSSnmpCommunitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv1/v2 Communities entry."
::= { gs2326plusSnmpCommunities 2 }
gs2326plusSnmpCommunitiesEntry OBJECT-TYPE
SYNTAX GS2326PLUSSnmpCommunitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSnmpCommunitiesIndex }
::= { gs2326plusSnmpCommunitiesTable 1 }
GS2326PLUSSnmpCommunitiesEntry ::= SEQUENCE {
gs2326plusSnmpCommunitiesIndex Integer32,
gs2326plusSnmpCommunitiesCommunity DisplayString,
gs2326plusSnmpCommunitiesUserName DisplayString,
gs2326plusSnmpCommunitiesSourceIP IpAddress,
gs2326plusSnmpCommunitiesSourceMask IpAddress,
gs2326plusSnmpCommunitiesRowStatus INTEGER
}
gs2326plusSnmpCommunitiesIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSnmpCommunitiesEntry 1 }
gs2326plusSnmpCommunitiesCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Community."
::= { gs2326plusSnmpCommunitiesEntry 2 }
gs2326plusSnmpCommunitiesUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 32 characters describing User Name. "
::= { gs2326plusSnmpCommunitiesEntry 3 }
gs2326plusSnmpCommunitiesSourceIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" SNMP access source ip. "
::= { gs2326plusSnmpCommunitiesEntry 4 }
gs2326plusSnmpCommunitiesSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" SNMP access source address mask. "
::= { gs2326plusSnmpCommunitiesEntry 5 }
gs2326plusSnmpCommunitiesRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2326plusSnmpCommunitiesEntry 6 }
gs2326plusSnmpUsers OBJECT IDENTIFIER ::= { gs2326plusSnmp 4 }
gs2326plusSnmpUsersCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2326plusSnmpUsers 1 }
gs2326plusSnmpUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSSnmpUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv3 users entry."
::= { gs2326plusSnmpUsers 2 }
gs2326plusSnmpUsersEntry OBJECT-TYPE
SYNTAX GS2326PLUSSnmpUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSnmpUsersIndex }
::= { gs2326plusSnmpUsersTable 1 }
GS2326PLUSSnmpUsersEntry ::= SEQUENCE {
gs2326plusSnmpUsersIndex Integer32,
gs2326plusSnmpUsersUserName DisplayString,
gs2326plusSnmpUsersSecurityLevel INTEGER,
gs2326plusSnmpUsersAuthenticationProtocol INTEGER,
gs2326plusSnmpUsersAuthenticationPassword DisplayString,
gs2326plusSnmpUsersPrivacyProtocol INTEGER,
gs2326plusSnmpUsersPrivacyPassword DisplayString,
gs2326plusSnmpUsersRowStatus INTEGER
}
gs2326plusSnmpUsersIndex OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSnmpUsersEntry 1 }
gs2326plusSnmpUsersUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing User Name."
::= { gs2326plusSnmpUsersEntry 2 }
gs2326plusSnmpUsersSecurityLevel OBJECT-TYPE
SYNTAX INTEGER { noauthnopriv(1), authnopriv(2), authpriv(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: No authentication and no privacy.
2: Authentication and no privacy.
3: Authentication and privacy. "
::= { gs2326plusSnmpUsersEntry 3 }
gs2326plusSnmpUsersAuthenticationProtocol OBJECT-TYPE
SYNTAX INTEGER { none(0), md5(1), sha(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: None.
1: MD5.
2: SHA "
::= { gs2326plusSnmpUsersEntry 4 }
gs2326plusSnmpUsersAuthenticationPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Authentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters.
If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters. "
::= { gs2326plusSnmpUsersEntry 5 }
gs2326plusSnmpUsersPrivacyProtocol OBJECT-TYPE
SYNTAX INTEGER { none(0), des(1), aes(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: None.
1: DES.
2: AES
This is the Privacy Protocol, which is used in AuthPriv.
An empty string will be returned if the security level is not 3(AuthPriv) "
::= { gs2326plusSnmpUsersEntry 6 }
gs2326plusSnmpUsersPrivacyPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters. "
::= { gs2326plusSnmpUsersEntry 7 }
gs2326plusSnmpUsersRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2326plusSnmpUsersEntry 8 }
gs2326plusSnmpGroups OBJECT IDENTIFIER ::= { gs2326plusSnmp 5 }
gs2326plusSnmpGroupsCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2326plusSnmpGroups 1 }
gs2326plusSnmpGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSSnmpGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv3 groups entry."
::= { gs2326plusSnmpGroups 2 }
gs2326plusSnmpGroupsEntry OBJECT-TYPE
SYNTAX GS2326PLUSSnmpGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSnmpGroupsIndex }
::= { gs2326plusSnmpGroupsTable 1 }
GS2326PLUSSnmpGroupsEntry ::= SEQUENCE {
gs2326plusSnmpGroupsIndex Integer32,
gs2326plusSnmpGroupsSecurityModel INTEGER,
gs2326plusSnmpGroupsSecurityName DisplayString,
gs2326plusSnmpGroupsGroupName DisplayString,
gs2326plusSnmpGroupsRowStatus INTEGER
}
gs2326plusSnmpGroupsIndex OBJECT-TYPE
SYNTAX Integer32(1..14)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSnmpGroupsEntry 1 }
gs2326plusSnmpGroupsSecurityModel OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2c(2), usm(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: v1.
2: v2c.
3: usm."
::= { gs2326plusSnmpGroupsEntry 2 }
gs2326plusSnmpGroupsSecurityName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing User Name."
::= { gs2326plusSnmpGroupsEntry 3 }
gs2326plusSnmpGroupsGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Group Name."
::= { gs2326plusSnmpGroupsEntry 4 }
gs2326plusSnmpGroupsRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2326plusSnmpGroupsEntry 5 }
gs2326plusSnmpViews OBJECT IDENTIFIER ::= { gs2326plusSnmp 6 }
gs2326plusSnmpViewsCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2326plusSnmpViews 1 }
gs2326plusSnmpViewsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSSnmpViewsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv1/v2 Views entry."
::= { gs2326plusSnmpViews 2 }
gs2326plusSnmpViewsEntry OBJECT-TYPE
SYNTAX GS2326PLUSSnmpViewsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSnmpViewsIndex }
::= { gs2326plusSnmpViewsTable 1 }
GS2326PLUSSnmpViewsEntry ::= SEQUENCE {
gs2326plusSnmpViewsIndex Integer32,
gs2326plusSnmpViewsName DisplayString,
gs2326plusSnmpViewsType INTEGER,
gs2326plusSnmpViewsOIDSubtree DisplayString,
gs2326plusSnmpViewsRowStatus INTEGER
}
gs2326plusSnmpViewsIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSnmpViewsEntry 1 }
gs2326plusSnmpViewsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing view Name."
::= { gs2326plusSnmpViewsEntry 2 }
gs2326plusSnmpViewsType OBJECT-TYPE
SYNTAX INTEGER { included(1), excluded(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: included, An optional flag to indicate that this view subtree should be included.
2: excluded, An optional flag to indicate that this view subtree should be excluded."
::= { gs2326plusSnmpViewsEntry 3 }
gs2326plusSnmpViewsOIDSubtree OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OID defining the root of the subtree to add to the named view."
::= { gs2326plusSnmpViewsEntry 4 }
gs2326plusSnmpViewsRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2326plusSnmpViewsEntry 5 }
gs2326plusSnmpAccess OBJECT IDENTIFIER ::= { gs2326plusSnmp 7 }
gs2326plusSnmpAccessCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2326plusSnmpAccess 1 }
gs2326plusSnmpAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSSnmpAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create SNMPv3 Access entry."
::= { gs2326plusSnmpAccess 2 }
gs2326plusSnmpAccessEntry OBJECT-TYPE
SYNTAX GS2326PLUSSnmpAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSnmpAccessIndex }
::= { gs2326plusSnmpAccessTable 1 }
GS2326PLUSSnmpAccessEntry ::= SEQUENCE {
gs2326plusSnmpAccessIndex Integer32,
gs2326plusSnmpAccessGroupName DisplayString,
gs2326plusSnmpAccessSecurityModel INTEGER,
gs2326plusSnmpAccessSecurityLevel INTEGER,
gs2326plusSnmpAccessReadViewName DisplayString,
gs2326plusSnmpAccessWriteViewName DisplayString,
gs2326plusSnmpAccessRowStatus INTEGER
}
gs2326plusSnmpAccessIndex OBJECT-TYPE
SYNTAX Integer32(1..14)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSnmpAccessEntry 1 }
gs2326plusSnmpAccessGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Group Name."
::= { gs2326plusSnmpAccessEntry 2 }
gs2326plusSnmpAccessSecurityModel OBJECT-TYPE
SYNTAX INTEGER { any(0), v1(1), v2c(2), usm(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: any.
1: v1.
2: v2c.
3: usm."
::= { gs2326plusSnmpAccessEntry 3 }
gs2326plusSnmpAccessSecurityLevel OBJECT-TYPE
SYNTAX INTEGER { noauthnopriv(1), authnopriv(2), authpriv(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: No authentication and no privacy.
2: Authentication and no privacy.
3: Authentication and privacy. "
::= { gs2326plusSnmpAccessEntry 4 }
gs2326plusSnmpAccessReadViewName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Read View Name.
None is reserved for Empty."
::= { gs2326plusSnmpAccessEntry 5 }
gs2326plusSnmpAccessWriteViewName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 32 characters describing Write View Name.
None is reserved for Empty."
::= { gs2326plusSnmpAccessEntry 6 }
gs2326plusSnmpAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2326plusSnmpAccessEntry 7 }
----------------------------------------------------------------------------------------------------
gs2326plusConfiguration OBJECT IDENTIFIER ::= { lancomGS2326plus 2 }
gs2326plusPort OBJECT IDENTIFIER ::= { gs2326plusConfiguration 1 }
gs2326plusPortConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show port configurations. "
::= { gs2326plusPort 1 }
gs2326plusPortConfigurationEntry OBJECT-TYPE
SYNTAX Gs2326plusPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusPortConfPort }
::= { gs2326plusPortConfigurationTable 1 }
Gs2326plusPortConfigurationEntry ::= SEQUENCE {
gs2326plusPortConfPort Integer32,
gs2326plusPortConfPortMedia DisplayString,
gs2326plusPortConfLink DisplayString,
gs2326plusPortConfCurrentSpeed DisplayString,
gs2326plusPortConfSpeed INTEGER,
gs2326plusPortConfCurrentFlowControlRx INTEGER,
gs2326plusPortConfCurrentFlowControlTx INTEGER,
gs2326plusPortConfFlowControl INTEGER,
gs2326plusPortConfMaxFrameSize Integer32,
gs2326plusPortConfExcessiveCollisionMode INTEGER,
gs2326plusPortConfPowerControl INTEGER,
gs2326plusPortConfDescription DisplayString
}
gs2326plusPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusPortConfigurationEntry 1 }
gs2326plusPortConfPortMedia OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Show port media. "
::= { gs2326plusPortConfigurationEntry 2 }
gs2326plusPortConfLink OBJECT-TYPE
SYNTAX DisplayString(SIZE (2..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current link state. "
::= { gs2326plusPortConfigurationEntry 3 }
gs2326plusPortConfCurrentSpeed OBJECT-TYPE
SYNTAX DisplayString(SIZE (6..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current link speed of the port. "
::= { gs2326plusPortConfigurationEntry 4 }
gs2326plusPortConfSpeed OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
auto(1),
speed10Half(2),
speed10Full(3),
speed100Half(4),
speed100Full(5),
speed1Gfull(6),
sfpAutoAMS(7),
speed100FXAMS(8),
speed1000XAMS(9),
speed100FX(10),
speed1000X(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1,
0: disable state,
1: auto,
2: 10 Half,
3: 10 Full,
4: 100 Half,
5: 100 Full,
6: 1G full,
only 'Dual Media' port have 7-11 option.
Dual Media port default: 7,
7: SFP_Auto_AMS,
8: 100FX_AMS,
9: 1000X_AMS,
10: 100FX,
11: 1000X "
::= { gs2326plusPortConfigurationEntry 5 }
gs2326plusPortConfCurrentFlowControlRx OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), noSupport(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: disable
1: enable
2: no support. "
::= { gs2326plusPortConfigurationEntry 6 }
gs2326plusPortConfCurrentFlowControlTx OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), noSupport(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: disable
1: enable
2: no support. "
::= { gs2326plusPortConfigurationEntry 7 }
gs2326plusPortConfFlowControl OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), noSupport(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable
1: enable
2: no support. "
::= { gs2326plusPortConfigurationEntry 8 }
gs2326plusPortConfMaxFrameSize OBJECT-TYPE
SYNTAX Integer32 (1518..9600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 9600 , range : 1518 - 9600 "
::= { gs2326plusPortConfigurationEntry 9 }
gs2326plusPortConfExcessiveCollisionMode OBJECT-TYPE
SYNTAX INTEGER { discard(0), restart(1), noSupport(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
Excessive Collision Mode :
0: Discard,
1: Restart,
2: no support.
"
::= { gs2326plusPortConfigurationEntry 10 }
gs2326plusPortConfPowerControl OBJECT-TYPE
SYNTAX INTEGER { disable(0), actiphy(1), dynamic(2), enable(3), noSupport(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
PowerControl :
0: disable,
1: Actiphy,
2: Dynamic (perfectReach),
3: Enable,
4: no support.
"
::= { gs2326plusPortConfigurationEntry 11 }
gs2326plusPortConfDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Interface specific description.
Up to 47 characters describing this interface. "
::= { gs2326plusPortConfigurationEntry 12 }
gs2326plusPortTrafficStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusPortTrafficStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPort 2 }
gs2326plusPortTrafficStatisticsEntry OBJECT-TYPE
SYNTAX Gs2326plusPortTrafficStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusPortTrafficStatisticsPort }
::= { gs2326plusPortTrafficStatisticsTable 1 }
Gs2326plusPortTrafficStatisticsEntry ::= SEQUENCE {
gs2326plusPortTrafficStatisticsPort Integer32,
gs2326plusPortTrafficStatisticsClear INTEGER,
gs2326plusPortTrafficRxPackets Counter64,
gs2326plusPortTrafficRxOctets Counter64,
gs2326plusPortTrafficRxUnicast Counter64,
gs2326plusPortTrafficRxMulticast Counter64,
gs2326plusPortTrafficRxBroadcast Counter64,
gs2326plusPortTrafficRxPause Counter64,
gs2326plusPortTrafficRx64Bytes Counter64,
gs2326plusPortTrafficRx65to127Bytes Counter64,
gs2326plusPortTrafficRx128to255Bytes Counter64,
gs2326plusPortTrafficRx256to511Bytes Counter64,
gs2326plusPortTrafficRx512to1023Bytes Counter64,
gs2326plusPortTrafficRx1024to1526Bytes Counter64,
gs2326plusPortTrafficRxExceecd1527Bytes Counter64,
gs2326plusPortTrafficRxQ0 Counter64,
gs2326plusPortTrafficRxQ1 Counter64,
gs2326plusPortTrafficRxQ2 Counter64,
gs2326plusPortTrafficRxQ3 Counter64,
gs2326plusPortTrafficRxQ4 Counter64,
gs2326plusPortTrafficRxQ5 Counter64,
gs2326plusPortTrafficRxQ6 Counter64,
gs2326plusPortTrafficRxQ7 Counter64,
gs2326plusPortTrafficRxDrops Counter64,
gs2326plusPortTrafficRxCRCorAlignment Counter64,
gs2326plusPortTrafficRxUndersize Counter64,
gs2326plusPortTrafficRxOversize Counter64,
gs2326plusPortTrafficRxFragments Counter64,
gs2326plusPortTrafficRxJabber Counter64,
gs2326plusPortTrafficRxFiltered Counter64,
gs2326plusPortTrafficTxPackets Counter64,
gs2326plusPortTrafficTxOctets Counter64,
gs2326plusPortTrafficTxUnicast Counter64,
gs2326plusPortTrafficTxMulticast Counter64,
gs2326plusPortTrafficTxBroadcast Counter64,
gs2326plusPortTrafficTxPause Counter64,
gs2326plusPortTrafficTx64Bytes Counter64,
gs2326plusPortTrafficTx65to127Bytes Counter64,
gs2326plusPortTrafficTx128to255Bytes Counter64,
gs2326plusPortTrafficTx256to511Bytes Counter64,
gs2326plusPortTrafficTx512to1023Bytes Counter64,
gs2326plusPortTrafficTx1024to1526Bytes Counter64,
gs2326plusPortTrafficTxExceecd1527Bytes Counter64,
gs2326plusPortTrafficTxQ0 Counter64,
gs2326plusPortTrafficTxQ1 Counter64,
gs2326plusPortTrafficTxQ2 Counter64,
gs2326plusPortTrafficTxQ3 Counter64,
gs2326plusPortTrafficTxQ4 Counter64,
gs2326plusPortTrafficTxQ5 Counter64,
gs2326plusPortTrafficTxQ6 Counter64,
gs2326plusPortTrafficTxQ7 Counter64,
gs2326plusPortTrafficTxDrops Counter64,
gs2326plusPortTrafficTxLateOrExcColl Counter64
}
gs2326plusPortTrafficStatisticsPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 1 }
gs2326plusPortTrafficStatisticsClear OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 2 }
gs2326plusPortTrafficRxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 3 }
gs2326plusPortTrafficRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 4 }
gs2326plusPortTrafficRxUnicast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 5 }
gs2326plusPortTrafficRxMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 6 }
gs2326plusPortTrafficRxBroadcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 7 }
gs2326plusPortTrafficRxPause OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 8 }
gs2326plusPortTrafficRx64Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 9 }
gs2326plusPortTrafficRx65to127Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 10 }
gs2326plusPortTrafficRx128to255Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 11 }
gs2326plusPortTrafficRx256to511Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 12 }
gs2326plusPortTrafficRx512to1023Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 13 }
gs2326plusPortTrafficRx1024to1526Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 14 }
gs2326plusPortTrafficRxExceecd1527Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 15 }
gs2326plusPortTrafficRxQ0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 16 }
gs2326plusPortTrafficRxQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 17 }
gs2326plusPortTrafficRxQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 18 }
gs2326plusPortTrafficRxQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 19 }
gs2326plusPortTrafficRxQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 20 }
gs2326plusPortTrafficRxQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 21 }
gs2326plusPortTrafficRxQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 22 }
gs2326plusPortTrafficRxQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 23 }
gs2326plusPortTrafficRxDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 24 }
gs2326plusPortTrafficRxCRCorAlignment OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 25 }
gs2326plusPortTrafficRxUndersize OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 26 }
gs2326plusPortTrafficRxOversize OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 27 }
gs2326plusPortTrafficRxFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 28 }
gs2326plusPortTrafficRxJabber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 29 }
gs2326plusPortTrafficRxFiltered OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 30 }
gs2326plusPortTrafficTxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 31 }
gs2326plusPortTrafficTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 32 }
gs2326plusPortTrafficTxUnicast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 33 }
gs2326plusPortTrafficTxMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 34 }
gs2326plusPortTrafficTxBroadcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 35 }
gs2326plusPortTrafficTxPause OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 36 }
gs2326plusPortTrafficTx64Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 37 }
gs2326plusPortTrafficTx65to127Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 38 }
gs2326plusPortTrafficTx128to255Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 39 }
gs2326plusPortTrafficTx256to511Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 40 }
gs2326plusPortTrafficTx512to1023Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 41 }
gs2326plusPortTrafficTx1024to1526Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 42 }
gs2326plusPortTrafficTxExceecd1527Bytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 43 }
gs2326plusPortTrafficTxQ0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 44 }
gs2326plusPortTrafficTxQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 45 }
gs2326plusPortTrafficTxQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 46 }
gs2326plusPortTrafficTxQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 47 }
gs2326plusPortTrafficTxQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 48 }
gs2326plusPortTrafficTxQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 49 }
gs2326plusPortTrafficTxQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 50 }
gs2326plusPortTrafficTxQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 51 }
gs2326plusPortTrafficTxDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 52 }
gs2326plusPortTrafficTxLateOrExcColl OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortTrafficStatisticsEntry 53 }
gs2326plusPortQoSStatistics OBJECT IDENTIFIER ::= { gs2326plusPort 3 }
gs2326plusPortQoSStatisticsClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"default: 0
0: none
1: clear "
::= { gs2326plusPortQoSStatistics 1 }
gs2326plusPortQoSStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusPortQoSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatistics 2 }
gs2326plusPortQoSStatisticsEntry OBJECT-TYPE
SYNTAX Gs2326plusPortQoSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusPortQoSStatisticsPort }
::= { gs2326plusPortQoSStatisticsTable 1 }
Gs2326plusPortQoSStatisticsEntry ::= SEQUENCE {
gs2326plusPortQoSStatisticsPort Integer32,
gs2326plusPortQoSQ0Rx Counter64,
gs2326plusPortQoSQ0Tx Counter64,
gs2326plusPortQoSQ1Rx Counter64,
gs2326plusPortQoSQ1Tx Counter64,
gs2326plusPortQoSQ2Rx Counter64,
gs2326plusPortQoSQ2Tx Counter64,
gs2326plusPortQoSQ3Rx Counter64,
gs2326plusPortQoSQ3Tx Counter64,
gs2326plusPortQoSQ4Rx Counter64,
gs2326plusPortQoSQ4Tx Counter64,
gs2326plusPortQoSQ5Rx Counter64,
gs2326plusPortQoSQ5Tx Counter64,
gs2326plusPortQoSQ6Rx Counter64,
gs2326plusPortQoSQ6Tx Counter64,
gs2326plusPortQoSQ7Rx Counter64,
gs2326plusPortQoSQ7Tx Counter64
}
gs2326plusPortQoSStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 1 }
gs2326plusPortQoSQ0Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 2 }
gs2326plusPortQoSQ0Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 3 }
gs2326plusPortQoSQ1Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 4 }
gs2326plusPortQoSQ1Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 5 }
gs2326plusPortQoSQ2Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 6 }
gs2326plusPortQoSQ2Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 7 }
gs2326plusPortQoSQ3Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 8 }
gs2326plusPortQoSQ3Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 9 }
gs2326plusPortQoSQ4Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 10 }
gs2326plusPortQoSQ4Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 11 }
gs2326plusPortQoSQ5Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 12 }
gs2326plusPortQoSQ5Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 13 }
gs2326plusPortQoSQ6Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 14 }
gs2326plusPortQoSQ6Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 15 }
gs2326plusPortQoSQ7Rx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 16 }
gs2326plusPortQoSQ7Tx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortQoSStatisticsEntry 17 }
gs2326plusSFPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSFPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPort 4 }
gs2326plusSFPInfoEntry OBJECT-TYPE
SYNTAX Gs2326plusSFPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSFPInfoIndex }
::= { gs2326plusSFPInfoTable 1 }
Gs2326plusSFPInfoEntry ::= SEQUENCE {
gs2326plusSFPInfoIndex Integer32,
gs2326plusSFPInfoPort DisplayString,
gs2326plusSFPConnectorType DisplayString,
gs2326plusSFPFiberType DisplayString,
gs2326plusSFPTxCentralWavelength DisplayString,
gs2326plusSFPBaudRate DisplayString,
gs2326plusSFPVendorOUI DisplayString,
gs2326plusSFPVendorName DisplayString,
gs2326plusSFPVendorPN DisplayString,
gs2326plusSFPVendorRev DisplayString,
gs2326plusSFPVendorSN DisplayString,
gs2326plusSFPDateCode DisplayString,
gs2326plusSFPTemperature DisplayString,
gs2326plusSFPVcc DisplayString,
gs2326plusSFPMon1Bias DisplayString,
gs2326plusSFPMon2TxPWR DisplayString,
gs2326plusSFPMon3RxPWR DisplayString
}
gs2326plusSFPInfoIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 1 }
gs2326plusSFPInfoPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 2 }
gs2326plusSFPConnectorType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 3 }
gs2326plusSFPFiberType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 4 }
gs2326plusSFPTxCentralWavelength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 5 }
gs2326plusSFPBaudRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 6 }
gs2326plusSFPVendorOUI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 7 }
gs2326plusSFPVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 8 }
gs2326plusSFPVendorPN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 9 }
gs2326plusSFPVendorRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 10 }
gs2326plusSFPVendorSN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 11 }
gs2326plusSFPDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 12 }
gs2326plusSFPTemperature OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 13 }
gs2326plusSFPVcc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 14 }
gs2326plusSFPMon1Bias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 15 }
gs2326plusSFPMon2TxPWR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 16 }
gs2326plusSFPMon3RxPWR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusSFPInfoEntry 17 }
gs2326plusPortEEETable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusPortEEEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPort 5 }
gs2326plusPortEEEEntry OBJECT-TYPE
SYNTAX Gs2326plusPortEEEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusPortEEEPort }
::= { gs2326plusPortEEETable 1 }
Gs2326plusPortEEEEntry ::= SEQUENCE {
gs2326plusPortEEEPort Integer32,
gs2326plusPortEEEMode INTEGER,
gs2326plusPortEEEUrgentQueue1 INTEGER,
gs2326plusPortEEEUrgentQueue2 INTEGER,
gs2326plusPortEEEUrgentQueue3 INTEGER,
gs2326plusPortEEEUrgentQueue4 INTEGER,
gs2326plusPortEEEUrgentQueue5 INTEGER,
gs2326plusPortEEEUrgentQueue6 INTEGER,
gs2326plusPortEEEUrgentQueue7 INTEGER,
gs2326plusPortEEEUrgentQueue8 INTEGER
}
gs2326plusPortEEEPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortEEEEntry 1 }
gs2326plusPortEEEMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusPortEEEEntry 2 }
gs2326plusPortEEEUrgentQueue1 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusPortEEEEntry 3 }
gs2326plusPortEEEUrgentQueue2 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusPortEEEEntry 4 }
gs2326plusPortEEEUrgentQueue3 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusPortEEEEntry 5 }
gs2326plusPortEEEUrgentQueue4 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusPortEEEEntry 6 }
gs2326plusPortEEEUrgentQueue5 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusPortEEEEntry 7 }
gs2326plusPortEEEUrgentQueue6 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusPortEEEEntry 8 }
gs2326plusPortEEEUrgentQueue7 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusPortEEEEntry 9 }
gs2326plusPortEEEUrgentQueue8 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusPortEEEEntry 10 }
gs2326plusVoiceVLAN OBJECT IDENTIFIER ::= { gs2326plusConfiguration 2 }
gs2326plusVoiceVLANConf OBJECT IDENTIFIER ::= { gs2326plusVoiceVLAN 1 }
gs2326plusVoiceVLANMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN mode operation.
default: 0,
0: disable
1: enable"
::= { gs2326plusVoiceVLANConf 1 }
gs2326plusVoiceVLANVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Voice VLAN ID.
default: 1000,
range : 1-4094. "
::= { gs2326plusVoiceVLANConf 2 }
gs2326plusVoiceVLANAgingTime OBJECT-TYPE
SYNTAX Integer32(10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN secure learning aging time.
default: 86400,
range : 10 - 10000000. "
::= { gs2326plusVoiceVLANConf 3 }
gs2326plusVoiceVLANTrafficClass OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN traffic class, all traffic on the Voice VLAN
will apply this class, available value is from 0(Low)
to 7(High).
default: 7. "
::= { gs2326plusVoiceVLANConf 4 }
gs2326plusVoiceVLANPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusVoiceVLANPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Voice Vlan configuration. "
::= { gs2326plusVoiceVLANConf 5 }
gs2326plusVoiceVLANPortEntry OBJECT-TYPE
SYNTAX Gs2326plusVoiceVLANPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusVoiceVLANPort }
::= { gs2326plusVoiceVLANPortTable 1 }
Gs2326plusVoiceVLANPortEntry ::= SEQUENCE {
gs2326plusVoiceVLANPort Integer32,
gs2326plusVoiceVLANPortMode INTEGER,
gs2326plusVoiceVLANPortSecurity INTEGER,
gs2326plusVoiceVLANPortDiscoveryProtocol INTEGER
}
gs2326plusVoiceVLANPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusVoiceVLANPortEntry 1 }
gs2326plusVoiceVLANPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), auto(1), forced(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN port mode.
default: 0,
0: Disable (Disjoin from Voice VLAN.)
1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members automatically.)
2: Forced (Force join to Voice VLAN.)"
::= { gs2326plusVoiceVLANPortEntry 2 }
gs2326plusVoiceVLANPortSecurity OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN port security mode.
default: 0,
0: Disable (Disjoin from Voice VLAN.)
1: enable ( Enable Voice VLAN security mode. When the function is
enabled, all non-telephone MAC address in Voice VLAN
will be blocked 10 seconds.)"
::= { gs2326plusVoiceVLANPortEntry 3 }
gs2326plusVoiceVLANPortDiscoveryProtocol OBJECT-TYPE
SYNTAX INTEGER { oui(0), lldp(1), both(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN port discovery protocol.
default: 0
0: OUI (Detect telephony device by OUI address.)
1: LLDP (Detect telephony device by LLDP.)
2: Both (Both OUI and LLDP.) "
::= { gs2326plusVoiceVLANPortEntry 4 }
gs2326plusVoiceVLANSkipNAS OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Voice VLAN skip NAS mode.
default: 0,
0: Disable (Do not skip NAS on Voice VLAN.)
1: enable (Enable skipping of NAS on Voice VLAN. When the function is
enabled, authentication through the NAS module is not
applied to the Voice VLAN, but clients are allowed without
authentication.)"
::= { gs2326plusVoiceVLANPortEntry 5 }
gs2326plusVoiceVLANOUI OBJECT IDENTIFIER ::= { gs2326plusVoiceVLAN 2 }
gs2326plusVoiceVLANOUICreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create an OUI entry"
::= { gs2326plusVoiceVLANOUI 1 }
gs2326plusVoiceVLANOUITable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusVoiceVLANOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create Voice VLAN OUI entry. Modify OUI table will
restart auto detect OUI process. "
::= { gs2326plusVoiceVLANOUI 2 }
gs2326plusVoiceVLANOUIEntry OBJECT-TYPE
SYNTAX Gs2326plusVoiceVLANOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusVoiceVLANOUIIndex }
::= { gs2326plusVoiceVLANOUITable 1 }
Gs2326plusVoiceVLANOUIEntry ::= SEQUENCE {
gs2326plusVoiceVLANOUIIndex Integer32,
gs2326plusVoiceVLANTelephonyOUI OCTET STRING,
gs2326plusVoiceVLANDescription DisplayString,
gs2326plusVoiceVLANOUIRowStatus INTEGER
}
gs2326plusVoiceVLANOUIIndex OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusVoiceVLANOUIEntry 1 }
gs2326plusVoiceVLANTelephonyOUI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OUI address, format : 0a 1b 2c "
::= { gs2326plusVoiceVLANOUIEntry 2 }
gs2326plusVoiceVLANDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 32 characters describing OUI address. "
::= { gs2326plusVoiceVLANOUIEntry 3 }
gs2326plusVoiceVLANOUIRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2326plusVoiceVLANOUIEntry 4 }
gs2326plusGARP OBJECT IDENTIFIER ::= { gs2326plusConfiguration 3 }
gs2326plusGARPConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusGARPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusGARP 1 }
gs2326plusGARPConfEntry OBJECT-TYPE
SYNTAX Gs2326plusGARPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusGARPConfPort }
::= { gs2326plusGARPConfTable 1 }
Gs2326plusGARPConfEntry ::= SEQUENCE {
gs2326plusGARPConfPort Integer32,
gs2326plusGARPJoinTimer Integer32,
gs2326plusGARPLeaveTimer Integer32,
gs2326plusGARPLeaveAllTimer Integer32,
gs2326plusGARPApplicantion INTEGER,
gs2326plusGARPAttributeType INTEGER,
gs2326plusGARPApplicant INTEGER
}
gs2326plusGARPConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusGARPConfEntry 1 }
gs2326plusGARPJoinTimer OBJECT-TYPE
SYNTAX Integer32(200..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 200, range : 200 - 1000 "
::= { gs2326plusGARPConfEntry 2 }
gs2326plusGARPLeaveTimer OBJECT-TYPE
SYNTAX Integer32(600..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 600 , range : 600 - 3000"
::= { gs2326plusGARPConfEntry 3 }
gs2326plusGARPLeaveAllTimer OBJECT-TYPE
SYNTAX Integer32(10000..50000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 10000, range : 10000 - 50000 "
::= { gs2326plusGARPConfEntry 4 }
gs2326plusGARPApplicantion OBJECT-TYPE
SYNTAX INTEGER { gvrp(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
1: GVRP"
::= { gs2326plusGARPConfEntry 5 }
gs2326plusGARPAttributeType OBJECT-TYPE
SYNTAX INTEGER { vlan(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
1: VLAN"
::= { gs2326plusGARPConfEntry 6 }
gs2326plusGARPApplicant OBJECT-TYPE
SYNTAX INTEGER { participant(0), nonParticipant(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: normal-participant
1: non-participant"
::= { gs2326plusGARPConfEntry 7 }
gs2326plusGARPStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusGARPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show the basic GARP port statistics. "
::= { gs2326plusGARP 2 }
gs2326plusGARPStatisticsEntry OBJECT-TYPE
SYNTAX Gs2326plusGARPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusGARPStatisticsPort }
::= { gs2326plusGARPStatisticsTable 1 }
Gs2326plusGARPStatisticsEntry ::= SEQUENCE {
gs2326plusGARPStatisticsPort Integer32,
gs2326plusGARPStatisticsPeerMAC DisplayString,
gs2326plusGARPStatisticsFailedCount Counter32
}
gs2326plusGARPStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusGARPStatisticsEntry 1 }
gs2326plusGARPStatisticsPeerMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Peer MAC is MAC address of the neighbour Switch from with GARP frame is received. "
::= { gs2326plusGARPStatisticsEntry 2 }
gs2326plusGARPStatisticsFailedCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" explain Failed count here. "
::= { gs2326plusGARPStatisticsEntry 3 }
gs2326plusGVRP OBJECT IDENTIFIER ::= { gs2326plusConfiguration 4 }
gs2326plusGVRPConf OBJECT IDENTIFIER ::= { gs2326plusGVRP 1 }
gs2326plusGVRPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable,
1: enable. "
::= { gs2326plusGVRPConf 1 }
gs2326plusGVRPConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusGVRPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusGVRPConf 2 }
gs2326plusGVRPConfEntry OBJECT-TYPE
SYNTAX Gs2326plusGVRPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusGVRPConfPort }
::= { gs2326plusGVRPConfTable 1 }
Gs2326plusGVRPConfEntry ::= SEQUENCE {
gs2326plusGVRPConfPort Integer32,
gs2326plusGVRPConfPortMode INTEGER,
gs2326plusGVRPConfPortRRole INTEGER
}
gs2326plusGVRPConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusGVRPConfEntry 1 }
gs2326plusGVRPConfPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
1: enable
0: disable"
::= { gs2326plusGVRPConfEntry 2 }
gs2326plusGVRPConfPortRRole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
1: enable
0: disable"
::= { gs2326plusGVRPConfEntry 3 }
gs2326plusGVRPStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusGVRPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusGVRP 2 }
gs2326plusGVRPStatisticsEntry OBJECT-TYPE
SYNTAX Gs2326plusGVRPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusGVRPStatisticsPort }
::= { gs2326plusGVRPStatisticsTable 1 }
Gs2326plusGVRPStatisticsEntry ::= SEQUENCE {
gs2326plusGVRPStatisticsPort Integer32,
gs2326plusGVRPStatisticsJoinTxCnt Counter32,
gs2326plusGVRPStatisticsLeaveTxCnt Counter32
}
gs2326plusGVRPStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusGVRPStatisticsEntry 1 }
gs2326plusGVRPStatisticsJoinTxCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusGVRPStatisticsEntry 2 }
gs2326plusGVRPStatisticsLeaveTxCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusGVRPStatisticsEntry 3 }
gs2326plusMirroring OBJECT IDENTIFIER ::= { gs2326plusConfiguration 6 }
gs2326plusPortToMirrorOn OBJECT-TYPE
SYNTAX Integer32(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable,
range : 1 - port number. "
::= { gs2326plusMirroring 1 }
gs2326plusMirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusMirroring 2 }
gs2326plusMirrorEntry OBJECT-TYPE
SYNTAX Gs2326plusMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMirrorPort }
::= { gs2326plusMirrorTable 1 }
Gs2326plusMirrorEntry ::= SEQUENCE {
gs2326plusMirrorPort Integer32,
gs2326plusMirrorMode INTEGER
}
gs2326plusMirrorPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusMirrorEntry 1 }
gs2326plusMirrorMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), rxOnly(2), txOnly(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable
2: rx only
3: tx only
Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored"
::= { gs2326plusMirrorEntry 2 }
gs2326plusTrapEventSeverity OBJECT IDENTIFIER ::= { gs2326plusConfiguration 7 }
gs2326plusTrapEventSeverityACL OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 1 }
gs2326plusTrapEventSeverityACLLog OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 7(Debug)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 2 }
gs2326plusTrapEventSeverityAccessMgmt OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 3 }
gs2326plusTrapEventSeverityAuthFailed OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 4 }
gs2326plusTrapEventSeverityColdStart OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 5 }
gs2326plusTrapEventSeverityConfigInfo OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 6 }
gs2326plusTrapEventSeverityFirmwareUpgrade OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 7 }
gs2326plusTrapEventSeverityImportExport OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 8 }
gs2326plusTrapEventSeverityLACP OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 9 }
gs2326plusTrapEventSeverityLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 10 }
gs2326plusTrapEventSeverityLogin OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 11 }
gs2326plusTrapEventSeverityLogout OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 12 }
gs2326plusTrapEventSeverityLoopProtect OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 13 }
gs2326plusTrapEventSeverityMgmtIPChange OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 14 }
gs2326plusTrapEventSeverityModuleChange OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 5(Notice)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 15 }
gs2326plusTrapEventSeverityNAS OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 16 }
gs2326plusTrapEventSeverityPasswordChange OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 17 }
gs2326plusTrapEventSeverityPortSecurity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 18 }
gs2326plusTrapEventSeverityVLAN OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 20 }
gs2326plusTrapEventSeverityWarmStart OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 21 }
gs2326plusTrapEventSeverityARPConflict OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 25 }
gs2326plusTrapEventSeveritySpoofingLimit OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 27 }
gs2326plusTrapEventSeverityStaticARPConflict OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusTrapEventSeverity 28 }
gs2326plusSMTP OBJECT IDENTIFIER ::= { gs2326plusConfiguration 8 }
gs2326plusSMTPMailServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing email server. "
::= { gs2326plusSMTP 1 }
gs2326plusSMTPUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing user name. "
::= { gs2326plusSMTP 2 }
gs2326plusSMTPPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing password. "
::= { gs2326plusSMTP 3 }
gs2326plusSMTPServeriryLevel OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 6
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debug"
::= { gs2326plusSMTP 4 }
gs2326plusSMTPSender OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing sender. "
::= { gs2326plusSMTP 5 }
gs2326plusSMTPReturnPath OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing return path. "
::= { gs2326plusSMTP 6 }
gs2326plusSMTPEmailAddress1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2326plusSMTP 7 }
gs2326plusSMTPEmailAddress2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2326plusSMTP 8 }
gs2326plusSMTPEmailAddress3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2326plusSMTP 9 }
gs2326plusSMTPEmailAddress4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2326plusSMTP 10 }
gs2326plusSMTPEmailAddress5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2326plusSMTP 11 }
gs2326plusSMTPEmailAddress6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Up to 47 characters describing mail address. "
::= { gs2326plusSMTP 12 }
gs2326plusACL OBJECT IDENTIFIER ::= { gs2326plusConfiguration 9 }
gs2326plusACLPortsConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusACLPortsConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusACL 1 }
gs2326plusACLPortsConfEntry OBJECT-TYPE
SYNTAX Gs2326plusACLPortsConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusACLPortsConfPort }
::= { gs2326plusACLPortsConfTable 1 }
Gs2326plusACLPortsConfEntry ::= SEQUENCE {
gs2326plusACLPortsConfPort Integer32,
gs2326plusACLPortsConfPolicyID Integer32,
gs2326plusACLPortsConfAction INTEGER,
gs2326plusACLPortsConfRateLimiterID Integer32,
gs2326plusACLPortsConfPortRedirect Integer32,
gs2326plusACLPortsConfMirror INTEGER,
gs2326plusACLPortsConfLogging INTEGER,
gs2326plusACLPortsConfShutdown INTEGER,
gs2326plusACLPortsConfState INTEGER,
gs2326plusACLPortsConfCounter Counter32
}
gs2326plusACLPortsConfPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusACLPortsConfEntry 1 }
gs2326plusACLPortsConfPolicyID OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0, range : 0 - 255 "
::= { gs2326plusACLPortsConfEntry 2 }
gs2326plusACLPortsConfAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1,
0: Deny
1: Permit"
::= { gs2326plusACLPortsConfEntry 3 }
gs2326plusACLPortsConfRateLimiterID OBJECT-TYPE
SYNTAX Integer32 (0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: Disable
range : 0 - 12 "
::= { gs2326plusACLPortsConfEntry 4 }
gs2326plusACLPortsConfPortRedirect OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: Disable
range : 0 - end port number "
::= { gs2326plusACLPortsConfEntry 5 }
gs2326plusACLPortsConfMirror OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: Disable
1: Enable "
::= { gs2326plusACLPortsConfEntry 6 }
gs2326plusACLPortsConfLogging OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: Disable
1: Enable "
::= { gs2326plusACLPortsConfEntry 7 }
gs2326plusACLPortsConfShutdown OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: Disable
1: Enable "
::= { gs2326plusACLPortsConfEntry 8 }
gs2326plusACLPortsConfState OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: Disable
1: Enable "
::= { gs2326plusACLPortsConfEntry 9 }
gs2326plusACLPortsConfCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of frames that match this ACE. "
::= { gs2326plusACLPortsConfEntry 10 }
gs2326plusACLRateLimiterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusACLRateLimiterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusACL 2 }
gs2326plusACLRateLimiterEntry OBJECT-TYPE
SYNTAX Gs2326plusACLRateLimiterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusACLRateLimiterID }
::= { gs2326plusACLRateLimiterTable 1 }
Gs2326plusACLRateLimiterEntry ::= SEQUENCE {
gs2326plusACLRateLimiterID Integer32,
gs2326plusACLRateLimiterUnit INTEGER,
gs2326plusACLRateLimiterRate Integer32
}
gs2326plusACLRateLimiterID OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Rate Limiter ID.
range : 1-12 "
::= { gs2326plusACLRateLimiterEntry 1 }
gs2326plusACLRateLimiterUnit OBJECT-TYPE
SYNTAX INTEGER { pps(0), kbps(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: pps
1: kbps"
::= { gs2326plusACLRateLimiterEntry 2 }
gs2326plusACLRateLimiterRate OBJECT-TYPE
SYNTAX Integer32(0..3276700)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1,
range : <0-3276700> pps
<0-10000> kbps"
::= { gs2326plusACLRateLimiterEntry 3 }
gs2326plusACLACE OBJECT IDENTIFIER ::= { gs2326plusACL 3 }
gs2326plusACLACECreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create an ACE entry"
::= { gs2326plusACLACE 1 }
gs2326plusACLACETable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusACLACEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create ACL ACE entry. "
::= { gs2326plusACLACE 2 }
gs2326plusACLACEEntry OBJECT-TYPE
SYNTAX Gs2326plusACLACEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusACLACEIndex }
::= { gs2326plusACLACETable 1 }
Gs2326plusACLACEEntry ::= SEQUENCE {
gs2326plusACLACEIndex Integer32,
gs2326plusACLACEID Integer32,
gs2326plusACLACENextID Integer32,
gs2326plusACLACEIngressPort DisplayString,
gs2326plusACLACEPortPolicyNumber Integer32,
gs2326plusACLACEPortPolicyBitmask Integer32,
gs2326plusACLACEFrameType INTEGER,
gs2326plusACLACEAction INTEGER,
gs2326plusACLACEDenyPortRedirect DisplayString,
gs2326plusACLACELogging INTEGER,
gs2326plusACLACEMirror INTEGER,
gs2326plusACLACERateLimiter Integer32,
gs2326plusACLACEShutdown INTEGER,
gs2326plusACLACEVLAN8021QTagged INTEGER,
gs2326plusACLACEVLANTagPriority Integer32,
gs2326plusACLACEVLANVID Integer32,
gs2326plusACLACEEtherType Integer32,
gs2326plusACLACESMAC DisplayString,
gs2326plusACLACEDMACType INTEGER,
gs2326plusACLACEDMAC DisplayString,
gs2326plusACLACEArpOpcode INTEGER,
gs2326plusACLACEArpFlagsRequestReply INTEGER,
gs2326plusACLACEArpFlagsArpSmac INTEGER,
gs2326plusACLACEArpFlagsRarpDmac INTEGER,
gs2326plusACLACEArpFlagsLength INTEGER,
gs2326plusACLACEArpFlagsIp INTEGER,
gs2326plusACLACEArpFlagsEthernet INTEGER,
gs2326plusACLACESIPType INTEGER,
gs2326plusACLACESIPIPAddress IpAddress,
gs2326plusACLACESIPNetworkPrefix Integer32,
gs2326plusACLACEDIPType INTEGER,
gs2326plusACLACEDIPIPAddress IpAddress,
gs2326plusACLACEDIPNetworkPrefix Integer32,
gs2326plusACLACEIPProtocol Integer32,
gs2326plusACLACEIPFlagsTTL INTEGER,
gs2326plusACLACEIPFlagsOptions INTEGER,
gs2326plusACLACEIPFlagsFragment INTEGER,
gs2326plusACLACEICMPType Integer32,
gs2326plusACLACEICMPCode Integer32,
gs2326plusACLACESourcePortMin Integer32,
gs2326plusACLACESourcePortMax Integer32,
gs2326plusACLACEDestPortMin Integer32,
gs2326plusACLACEDestPortMax Integer32,
gs2326plusACLACETCPFlagsFin INTEGER,
gs2326plusACLACETCPFlagsSyn INTEGER,
gs2326plusACLACETCPFlagsRst INTEGER,
gs2326plusACLACETCPFlagsPsh INTEGER,
gs2326plusACLACETCPFlagsAck INTEGER,
gs2326plusACLACETCPFlagsUrg INTEGER,
gs2326plusACLACERowStatus INTEGER
}
gs2326plusACLACEIndex OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusACLACEEntry 1 }
gs2326plusACLACEID OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256. "
::= { gs2326plusACLACEEntry 2 }
gs2326plusACLACENextID OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256. "
::= { gs2326plusACLACEEntry 3 }
gs2326plusACLACEIngressPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6."
::= { gs2326plusACLACEEntry 4 }
gs2326plusACLACEPortPolicyNumber OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" policy value.
range : 0 - 255. "
::= { gs2326plusACLACEEntry 5 }
gs2326plusACLACEPortPolicyBitmask OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" policy bitmask.
range : 0 - 255(0xff). "
::= { gs2326plusACLACEEntry 6 }
gs2326plusACLACEFrameType OBJECT-TYPE
SYNTAX INTEGER {
any(0),
arp(1),
etype(2),
icmp(3),
ipv4(4),
tcp(5),
udp(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp."
::= { gs2326plusACLACEEntry 7 }
gs2326plusACLACEAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1,
0: Deny
1: Permit"
::= { gs2326plusACLACEEntry 8 }
gs2326plusACLACEDenyPortRedirect OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6."
::= { gs2326plusACLACEEntry 9 }
gs2326plusACLACELogging OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log."
::= { gs2326plusACLACEEntry 10 }
gs2326plusACLACEMirror OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable - Frames matching the ACE are not mirrored.
1: enable - Frames matching the ACE are mirrored."
::= { gs2326plusACLACEEntry 11 }
gs2326plusACLACERateLimiter OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: Disable
range : 0 - 12 "
::= { gs2326plusACLACEEntry 12 }
gs2326plusACLACEShutdown OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled."
::= { gs2326plusACLACEEntry 13 }
gs2326plusACLACEVLAN8021QTagged OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1), any(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to the 802.1Q tagged.
default: 2,
0: disable - Untagged frame only.
1: enable - Tagged frame only.
2: Any - Any value is allowed. "
::= { gs2326plusACLACEEntry 14 }
gs2326plusACLACEVLANTagPriority OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8 "
::= { gs2326plusACLACEEntry 15 }
gs2326plusACLACEVLANVID OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094 "
::= { gs2326plusACLACEEntry 16 }
gs2326plusACLACEEtherType OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff). "
::= { gs2326plusACLACEEntry 17 }
gs2326plusACLACESMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care."
::= { gs2326plusACLACEEntry 18 }
gs2326plusACLACEDMACType OBJECT-TYPE
SYNTAX INTEGER { any(0), broadcast(1), unicast(2), multicast(3) , macAddress(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address.
range : 0 - 4 "
::= { gs2326plusACLACEEntry 19 }
gs2326plusACLACEDMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Frame must be broadcast.
Unicast: Frame must be unicast.
Multicast: Frame must be multicast. "
::= { gs2326plusACLACEEntry 20 }
gs2326plusACLACEArpOpcode OBJECT-TYPE
SYNTAX INTEGER { any(0), arp(1), rarp(2), other(3), noData(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 4 "
::= { gs2326plusACLACEEntry 21 }
gs2326plusACLACEArpFlagsRequestReply OBJECT-TYPE
SYNTAX INTEGER { reply(0), request(1), any(2), noData(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP flag set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 22 }
gs2326plusACLACEArpFlagsArpSmac OBJECT-TYPE
SYNTAX INTEGER { notEqualSMAC(0), equalSMAC(1), any(2), noData(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 23 }
gs2326plusACLACEArpFlagsRarpDmac OBJECT-TYPE
SYNTAX INTEGER { notEqualDMAC(0), equalDMAC(1), any(2), noData(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1: RARP frames where THA is equal to the DMAC address.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 24 }
gs2326plusACLACEArpFlagsLength OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04).
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4(0x04).
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 25 }
gs2326plusACLACEArpFlagsIp OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(1).
1: ARP/RARP frames where the HLD is equal to Ethernet(1).
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 26 }
gs2326plusACLACEArpFlagsEthernet OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x800).
1: ARP/RARP frames where the PRO is equal to IP(0x800).
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 27 }
gs2326plusACLACESIPType OBJECT-TYPE
SYNTAX INTEGER { any(0), ip(1), noData(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1"
::= { gs2326plusACLACEEntry 28 }
gs2326plusACLACESIPIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A frame that hits this ACE matches this source IP address value."
::= { gs2326plusACLACEEntry 29 }
gs2326plusACLACESIPNetworkPrefix OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network prefix.
default: 32,
0: No data.
range : 1 - 32"
::= { gs2326plusACLACEEntry 30 }
gs2326plusACLACEDIPType OBJECT-TYPE
SYNTAX INTEGER { any(0), ip(1),noData(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1"
::= { gs2326plusACLACEEntry 32 }
gs2326plusACLACEDIPIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A frame that hits this ACE matches this destination IP address value."
::= { gs2326plusACLACEEntry 33 }
gs2326plusACLACEDIPNetworkPrefix OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network prefix.
default: 32,
0: No data.
range : 1 - 32"
::= { gs2326plusACLACEEntry 34 }
gs2326plusACLACEIPProtocol OBJECT-TYPE
SYNTAX Integer32(0..257)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256"
::= { gs2326plusACLACEEntry 36 }
gs2326plusACLACEIPFlagsTTL OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 37 }
gs2326plusACLACEIPFlagsOptions OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 38 }
gs2326plusACLACEIPFlagsFragment OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 39 }
gs2326plusACLACEICMPType OBJECT-TYPE
SYNTAX Integer32(0..257)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256"
::= { gs2326plusACLACEEntry 40 }
gs2326plusACLACEICMPCode OBJECT-TYPE
SYNTAX Integer32(0..257)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257"
::= { gs2326plusACLACEEntry 41 }
gs2326plusACLACESourcePortMin OBJECT-TYPE
SYNTAX Integer32(0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536"
::= { gs2326plusACLACEEntry 42 }
gs2326plusACLACESourcePortMax OBJECT-TYPE
SYNTAX Integer32(0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536"
::= { gs2326plusACLACEEntry 43 }
gs2326plusACLACEDestPortMin OBJECT-TYPE
SYNTAX Integer32(0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535"
::= { gs2326plusACLACEEntry 44 }
gs2326plusACLACEDestPortMax OBJECT-TYPE
SYNTAX Integer32(0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535"
::= { gs2326plusACLACEEntry 45 }
gs2326plusACLACETCPFlagsFin OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 46 }
gs2326plusACLACETCPFlagsSyn OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 47 }
gs2326plusACLACETCPFlagsRst OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 48 }
gs2326plusACLACETCPFlagsPsh OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 49 }
gs2326plusACLACETCPFlagsAck OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 50 }
gs2326plusACLACETCPFlagsUrg OBJECT-TYPE
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : 0 - 3 "
::= { gs2326plusACLACEEntry 51 }
gs2326plusACLACERowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: active
2: notInservice
4: destroy
5: undo"
::= { gs2326plusACLACEEntry 66 }
gs2326plusACLACEClear OBJECT-TYPE
SYNTAX INTEGER { noAction(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : No action
1 : Clear all ACL counters."
::= { gs2326plusACLACE 3 }
gs2326plusACLACEMoveACEID OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Move ACE,
default: 0
ACE ID must be exist.
range : 1 - 256."
::= { gs2326plusACLACE 4 }
gs2326plusACLACEMoveNextACEID OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Move ACE,
default: 0
If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256."
::= { gs2326plusACLACE 5 }
gs2326plusACLACEStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusACLACEStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" ACL ACE Status entry. "
::= { gs2326plusACLACE 6 }
gs2326plusACLACEStatusEntry OBJECT-TYPE
SYNTAX Gs2326plusACLACEStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusACLACEStatusIndex }
::= { gs2326plusACLACEStatusTable 1 }
Gs2326plusACLACEStatusEntry ::= SEQUENCE {
gs2326plusACLACEStatusIndex Integer32,
gs2326plusACLACEStatusUser DisplayString,
gs2326plusACLACEStatusID Integer32,
gs2326plusACLACEStatusIngressPort DisplayString,
gs2326plusACLACEStatusFrameType DisplayString,
gs2326plusACLACEStatusAction DisplayString,
gs2326plusACLACEStatusRateLimiter DisplayString,
gs2326plusACLACEStatusPortCopy DisplayString,
gs2326plusACLACEStatusMirror DisplayString,
gs2326plusACLACEStatusCPU DisplayString,
gs2326plusACLACEStatusCounter Counter32,
gs2326plusACLACEStatusConflict DisplayString
}
gs2326plusACLACEStatusIndex OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusACLACEStatusEntry 1 }
gs2326plusACLACEStatusUser OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the ACL user.
S : Static.
IPMG : IP Management.
IPSG : IP Source Guard.
IPMC : IPMC.
ARPI : Arp Inspection.
UPnP : UPnP.
DHCP : DHCP. "
::= { gs2326plusACLACEStatusEntry 2 }
gs2326plusACLACEStatusID OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ACE ID.
range : 1 - 256. "
::= { gs2326plusACLACEStatusEntry 3 }
gs2326plusACLACEStatusIngressPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port. "
::= { gs2326plusACLACEStatusEntry 4 }
gs2326plusACLACEStatusFrameType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the frame type of the ACE. "
::= { gs2326plusACLACEStatusEntry 5 }
gs2326plusACLACEStatusAction OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the forwarding action of the ACE. "
::= { gs2326plusACLACEStatusEntry 6 }
gs2326plusACLACEStatusRateLimiter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the rate limiter number of the ACE. "
::= { gs2326plusACLACEStatusEntry 7 }
gs2326plusACLACEStatusPortCopy OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. "
::= { gs2326plusACLACEStatusEntry 8 }
gs2326plusACLACEStatusMirror OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Specify the mirror operation of this port. "
::= { gs2326plusACLACEStatusEntry 9 }
gs2326plusACLACEStatusCPU OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Forward packet that matched the specific ACE to CPU. "
::= { gs2326plusACLACEStatusEntry 10 }
gs2326plusACLACEStatusCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The counter indicates the number of times the ACE was hit by a frame. "
::= { gs2326plusACLACEStatusEntry 11 }
gs2326plusACLACEStatusConflict OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations. "
::= { gs2326plusACLACEStatusEntry 12 }
gs2326plusLoopProtection OBJECT IDENTIFIER ::= { gs2326plusConfiguration 12 }
gs2326plusLoopProtectionConfig OBJECT IDENTIFIER ::= { gs2326plusLoopProtection 1 }
gs2326plusLoopProtectionGlobalEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection mode.
0: disable,
1: enable,
default: disable. "
::= { gs2326plusLoopProtectionConfig 1 }
gs2326plusLoopProtectionTranmisstionTime OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection transmit interval.
default: 5,
range: 1-10. "
::= { gs2326plusLoopProtectionConfig 2 }
gs2326plusLoopProtectionShutdownTime OBJECT-TYPE
SYNTAX Integer32(0..604800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection shutdown time.
default: 180,
range: 0-604800. "
::= { gs2326plusLoopProtectionConfig 3 }
gs2326plusLoopProtectionConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusLoopProtectionConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Loop Protection configurations. "
::= { gs2326plusLoopProtectionConfig 4 }
gs2326plusLoopProtectionConfigurationEntry OBJECT-TYPE
SYNTAX Gs2326plusLoopProtectionConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusLoopProtectionConfPort }
::= { gs2326plusLoopProtectionConfigurationTable 1 }
Gs2326plusLoopProtectionConfigurationEntry ::= SEQUENCE {
gs2326plusLoopProtectionConfPort Integer32,
gs2326plusLoopProtectionConfEnable INTEGER,
gs2326plusLoopProtectionConfAction INTEGER,
gs2326plusLoopProtectionConfTxmode INTEGER
}
gs2326plusLoopProtectionConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusLoopProtectionConfigurationEntry 1 }
gs2326plusLoopProtectionConfEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection port mode.
0: disable,
1: enable,
default: enable. "
::= { gs2326plusLoopProtectionConfigurationEntry 2 }
gs2326plusLoopProtectionConfAction OBJECT-TYPE
SYNTAX INTEGER { shutdown(0), shutdownLog(1), log(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure loop protection port action.
0: Shutdown port,
1: Shutdown port and Log,
2: Log Only,
default: Shutdown port. "
::= { gs2326plusLoopProtectionConfigurationEntry 3 }
gs2326plusLoopProtectionConfTxmode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure loop protection port transmit mode.
0: disable,
1: enable,
default: enable. "
::= { gs2326plusLoopProtectionConfigurationEntry 4 }
gs2326plusLoopProtectionStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusLoopProtectionStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Loop Protection Status. "
::= { gs2326plusLoopProtection 2 }
gs2326plusLoopProtectionStatusEntry OBJECT-TYPE
SYNTAX Gs2326plusLoopProtectionStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusLoopProtectionStatusPort }
::= { gs2326plusLoopProtectionStatusTable 1 }
Gs2326plusLoopProtectionStatusEntry ::= SEQUENCE {
gs2326plusLoopProtectionStatusPort Integer32,
gs2326plusLoopProtectionStatusAction DisplayString,
gs2326plusLoopProtectionStatusTransmit DisplayString,
gs2326plusLoopProtectionStatusLoops Integer32,
gs2326plusLoopProtectionStatusStatus DisplayString,
gs2326plusLoopProtectionStatusLoop DisplayString,
gs2326plusLoopProtectionStatusTimeLastLoop DisplayString
}
gs2326plusLoopProtectionStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusLoopProtectionStatusEntry 1 }
gs2326plusLoopProtectionStatusAction OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The currently configured port action. "
::= { gs2326plusLoopProtectionStatusEntry 2 }
gs2326plusLoopProtectionStatusTransmit OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The currently configured port transmit mode. "
::= { gs2326plusLoopProtectionStatusEntry 3 }
gs2326plusLoopProtectionStatusLoops OBJECT-TYPE
SYNTAX Integer32(0..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of loops detected on this port. "
::= { gs2326plusLoopProtectionStatusEntry 4 }
gs2326plusLoopProtectionStatusStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current loop protection status of the port. "
::= { gs2326plusLoopProtectionStatusEntry 5 }
gs2326plusLoopProtectionStatusLoop OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Whether a loop is currently detected on the port. "
::= { gs2326plusLoopProtectionStatusEntry 6 }
gs2326plusLoopProtectionStatusTimeLastLoop OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The time of the last loop event detected. "
::= { gs2326plusLoopProtectionStatusEntry 7 }
gs2326plusQos OBJECT IDENTIFIER ::= { gs2326plusConfiguration 14 }
gs2326plusQosPortClassification OBJECT IDENTIFIER ::= { gs2326plusQos 1 }
gs2326plusQosPortClassificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosPortClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" QoS Ingress Port Classification . "
::= { gs2326plusQosPortClassification 1 }
gs2326plusQosPortClassificationEntry OBJECT-TYPE
SYNTAX Gs2326plusQosPortClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosPortClassificationPort }
::= { gs2326plusQosPortClassificationTable 1 }
Gs2326plusQosPortClassificationEntry ::= SEQUENCE {
gs2326plusQosPortClassificationPort Integer32,
gs2326plusQosPortClassificationQoSclass Integer32,
gs2326plusQosPortClassificationDPlevel Integer32,
gs2326plusQosPortClassificationPCP Integer32,
gs2326plusQosPortClassificationDEI INTEGER,
gs2326plusQosPortClassificationTagClass INTEGER,
gs2326plusQosPortClassificationDSCPBased INTEGER,
gs2326plusQosPortClassificationAddressMode INTEGER
}
gs2326plusQosPortClassificationPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusQosPortClassificationEntry 1 }
gs2326plusQosPortClassificationQoSclass OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the default QoS class, i.e., the QoS class
for frames not classified in any other way. There is
a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority.
Note: If the QoS class has been dynamically changed, then
the actual QoS class is shown in parentheses after the
configured QoS class.
Configure the default QoS class.
range: 0-7,
default: 0. "
::= { gs2326plusQosPortClassificationEntry 2 }
gs2326plusQosPortClassificationDPlevel OBJECT-TYPE
SYNTAX Integer32(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DP level for frames not classified in any other way.
range: 0-1,
default: 0. "
::= { gs2326plusQosPortClassificationEntry 3 }
gs2326plusQosPortClassificationPCP OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Priority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame.
range: 0-7,
default: 0. "
::= { gs2326plusQosPortClassificationEntry 4 }
gs2326plusQosPortClassificationDEI OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Drop Eligible Indicator. It is a 1-bit field in the VLAN.
range 0-1,
default: 0. "
::= { gs2326plusQosPortClassificationEntry 5 }
gs2326plusQosPortClassificationTagClass OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure the classification mode for tagged frames.
0: Disable,
1: Enable,
default: Disable. "
::= { gs2326plusQosPortClassificationEntry 6 }
gs2326plusQosPortClassificationDSCPBased OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Click to Enable DSCP Based QoS Ingress Port Classification.
0: disable,
1: enable,
default: disable. "
::= { gs2326plusQosPortClassificationEntry 7 }
gs2326plusQosPortClassificationAddressMode OBJECT-TYPE
SYNTAX INTEGER { source(0), destination(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP/MAC address mode specifying whether the QCL classification
must be based on source (SMAC/SIP) or destination (DMAC/DIP)
addresses on this port.
0: source,
1: destination,
default: source. "
::= { gs2326plusQosPortClassificationEntry 8 }
gs2326plusQoSIngressPortTagClassificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQoSIngressPortTagClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show QoS Ingress Port Tag Classification. "
::= { gs2326plusQosPortClassification 2 }
gs2326plusQoSIngressPortTagClassificationEntry OBJECT-TYPE
SYNTAX Gs2326plusQoSIngressPortTagClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQoSIngressPortTagClassificationPort, gs2326plusQoSIngressPortTagPCP, gs2326plusQoSIngressPortTagDEI }
::= { gs2326plusQoSIngressPortTagClassificationTable 1 }
Gs2326plusQoSIngressPortTagClassificationEntry ::= SEQUENCE {
gs2326plusQoSIngressPortTagClassificationPort Integer32,
gs2326plusQoSIngressPortTagPCP INTEGER,
gs2326plusQoSIngressPortTagDEI INTEGER,
gs2326plusQoSIngressPortTagQosClass Integer32,
gs2326plusQoSIngressPortTagDPLevel Integer32
}
gs2326plusQoSIngressPortTagClassificationPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusQoSIngressPortTagClassificationEntry 1 }
gs2326plusQoSIngressPortTagPCP OBJECT-TYPE
SYNTAX INTEGER { pcp0(1), pcp1(2), pcp2(3), pcp3(4), pcp4(5), pcp5(6), pcp6(7), pcp7(8) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-8,
PCP0:1, PCP1:2... "
::= { gs2326plusQoSIngressPortTagClassificationEntry 2 }
gs2326plusQoSIngressPortTagDEI OBJECT-TYPE
SYNTAX INTEGER { dei0(1), dei1(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-2,
DEI0:1, DEI1:2. "
::= { gs2326plusQoSIngressPortTagClassificationEntry 3 }
gs2326plusQoSIngressPortTagQosClass OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 0-7. "
::= { gs2326plusQoSIngressPortTagClassificationEntry 4 }
gs2326plusQoSIngressPortTagDPLevel OBJECT-TYPE
SYNTAX Integer32 (0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 0-1. "
::= { gs2326plusQoSIngressPortTagClassificationEntry 5 }
gs2326plusQosPortPolicingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosPortPolicingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the Policer settings for all switch ports. "
::= { gs2326plusQos 2 }
gs2326plusQosPortPolicingEntry OBJECT-TYPE
SYNTAX Gs2326plusQosPortPolicingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosPortPolicingPort }
::= { gs2326plusQosPortPolicingTable 1 }
Gs2326plusQosPortPolicingEntry ::= SEQUENCE {
gs2326plusQosPortPolicingPort Integer32,
gs2326plusQosPortPolicingMode INTEGER,
gs2326plusQosPortPolicingRate Integer32,
gs2326plusQosPortPolicingUnit INTEGER,
gs2326plusQosPortPolicingFlowControl INTEGER
}
gs2326plusQosPortPolicingPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusQosPortPolicingEntry 1 }
gs2326plusQosPortPolicingMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls whether the policer is enabled on this switch port.
0: disable,
1: enable,
default: disable. "
::= { gs2326plusQosPortPolicingEntry 2 }
gs2326plusQosPortPolicingRate OBJECT-TYPE
SYNTAX Integer32(100..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the rate for the policer.
range: 100-10000000(kbps/fps),
default: 500(kbps). "
::= { gs2326plusQosPortPolicingEntry 3 }
gs2326plusQosPortPolicingUnit OBJECT-TYPE
SYNTAX INTEGER { kbps(0), fps(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the unit of measure for the policer rate.
0: kbps,
1: fps,
default: kbps. "
::= { gs2326plusQosPortPolicingEntry 4 }
gs2326plusQosPortPolicingFlowControl OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If flow control is enabled and the port is in flow control mode,
then pause frames are sent instead of discarding frames.
0: disable,
1: enable,
default: disable. "
::= { gs2326plusQosPortPolicingEntry 5 }
gs2326plusQosPortScheduler OBJECT IDENTIFIER ::= { gs2326plusQos 3 }
gs2326plusQosPortSchedulerModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosPortSchedulerModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS Port Scheduler Mode settings for all switch ports. "
::= { gs2326plusQosPortScheduler 1 }
gs2326plusQosPortSchedulerModeEntry OBJECT-TYPE
SYNTAX Gs2326plusQosPortSchedulerModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosSchedulerModePort }
::= { gs2326plusQosPortSchedulerModeTable 1 }
Gs2326plusQosPortSchedulerModeEntry ::= SEQUENCE {
gs2326plusQosSchedulerModePort Integer32,
gs2326plusQosSchedulerMode INTEGER,
gs2326plusQosSchedulerShaper INTEGER,
gs2326plusQosSchedulerShaperRate Integer32
}
gs2326plusQosSchedulerModePort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusQosPortSchedulerModeEntry 1 }
gs2326plusQosSchedulerMode OBJECT-TYPE
SYNTAX INTEGER { strictPriority(0), weighted(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls whether the scheduler mode is Strict Priority or Weighted
on this switch port.
0:Strict Priority
1:Weighted
default: Strict Priority. "
::= { gs2326plusQosPortSchedulerModeEntry 2 }
gs2326plusQosSchedulerShaper OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls whether the port shaper is enabled
0: Disable
1: Enable.
default: disable. "
::= { gs2326plusQosPortSchedulerModeEntry 3 }
gs2326plusQosSchedulerShaperRate OBJECT-TYPE
SYNTAX Integer32(100..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the rate for the port shaper.
range: 100-1000000
default: 500 kbps. "
::= { gs2326plusQosPortSchedulerModeEntry 4 }
gs2326plusQosPortSchedulerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosPortSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Qos Port Scheduler. "
::= { gs2326plusQosPortScheduler 2 }
gs2326plusQosPortSchedulerEntry OBJECT-TYPE
SYNTAX Gs2326plusQosPortSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosSchedulerPort, gs2326plusQosSchedulerPortQueue}
::= { gs2326plusQosPortSchedulerTable 1 }
Gs2326plusQosPortSchedulerEntry ::= SEQUENCE {
gs2326plusQosSchedulerPort Integer32,
gs2326plusQosSchedulerPortQueue INTEGER,
gs2326plusQosSchedulerPortQueueShaper INTEGER,
gs2326plusQosSchedulerPortQueueShaperRate Integer32,
gs2326plusQosSchedulerPortQueueShaperExcess INTEGER,
gs2326plusQosSchedulerPortQueueSchedulerWeight Integer32,
gs2326plusQosSchedulerPortQueueSchedulerPercent DisplayString
}
gs2326plusQosSchedulerPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusQosPortSchedulerEntry 1 }
gs2326plusQosSchedulerPortQueue OBJECT-TYPE
SYNTAX INTEGER { q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-8.
Q0: 1, Q1: 2, ... "
::= { gs2326plusQosPortSchedulerEntry 2 }
gs2326plusQosSchedulerPortQueueShaper OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: disable 1:enable,
default: 0. "
::= { gs2326plusQosPortSchedulerEntry 3 }
gs2326plusQosSchedulerPortQueueShaperRate OBJECT-TYPE
SYNTAX Integer32(100..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 100..1000000 kbps. "
::= { gs2326plusQosPortSchedulerEntry 4 }
gs2326plusQosSchedulerPortQueueShaperExcess OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 0: disable 1:enable,
default: 0. "
::= { gs2326plusQosPortSchedulerEntry 5 }
gs2326plusQosSchedulerPortQueueSchedulerWeight OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 1-100,
default: 17.
Only use in Q0 - Q5. Q6 & Q7 show 0 "
::= { gs2326plusQosPortSchedulerEntry 6 }
gs2326plusQosSchedulerPortQueueSchedulerPercent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Only use in Q0 - Q5. Q6 & Q7 show empty "
::= { gs2326plusQosPortSchedulerEntry 7 }
gs2326plusQosPortEgressTagRemarking OBJECT IDENTIFIER ::= { gs2326plusQos 4 }
gs2326plusQosPortEgressTagRemarkingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosPortEgressTagRemarkingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports. "
::= { gs2326plusQosPortEgressTagRemarking 1 }
gs2326plusQosPortEgressTagRemarkingEntry OBJECT-TYPE
SYNTAX Gs2326plusQosPortEgressTagRemarkingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosEgressTagRemarkingPort }
::= { gs2326plusQosPortEgressTagRemarkingTable 1 }
Gs2326plusQosPortEgressTagRemarkingEntry ::= SEQUENCE {
gs2326plusQosEgressTagRemarkingPort Integer32,
gs2326plusQosEgressTagRemarkingMode INTEGER
}
gs2326plusQosEgressTagRemarkingPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusQosPortEgressTagRemarkingEntry 1 }
gs2326plusQosEgressTagRemarkingMode OBJECT-TYPE
SYNTAX INTEGER { classified(0), default(1), mapped(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" the tag remarking mode for this port.
0:Classified, Use classified PCP/DEI values.
1:Default, Use default PCP/DEI values.
2:Mapped, Use mapped versions of QoS class and DP level."
::= { gs2326plusQosPortEgressTagRemarkingEntry 2 }
gs2326plusQosPortEgressTagRemarkingDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosPortEgressTagRemarkingDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports. "
::= { gs2326plusQosPortEgressTagRemarking 2 }
gs2326plusQosPortEgressTagRemarkingDefEntry OBJECT-TYPE
SYNTAX Gs2326plusQosPortEgressTagRemarkingDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosEgressTagRemarkingDefPort }
::= { gs2326plusQosPortEgressTagRemarkingDefTable 1 }
Gs2326plusQosPortEgressTagRemarkingDefEntry ::= SEQUENCE {
gs2326plusQosEgressTagRemarkingDefPort Integer32,
gs2326plusQosEgressTagRemarkingDefPCP Integer32,
gs2326plusQosEgressTagRemarkingDefDEI INTEGER
}
gs2326plusQosEgressTagRemarkingDefPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusQosPortEgressTagRemarkingDefEntry 1 }
gs2326plusQosEgressTagRemarkingDefPCP OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the default PCP
Range : 0-7"
::= { gs2326plusQosPortEgressTagRemarkingDefEntry 2 }
gs2326plusQosEgressTagRemarkingDefDEI OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" controls the DEI
Range 0-1"
::= { gs2326plusQosPortEgressTagRemarkingDefEntry 3 }
gs2326plusQosPortEgressTagRemarkingMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosPortEgressTagRemarkingMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show Qos Port Egress Tag Remarking Map. "
::= { gs2326plusQosPortEgressTagRemarking 4 }
gs2326plusQosPortEgressTagRemarkingMapEntry OBJECT-TYPE
SYNTAX Gs2326plusQosPortEgressTagRemarkingMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosPortEgressTagRemarkingMapPort, gs2326plusQosTagRemarkingQoSClass, gs2326plusQosTagRemarkingDPLevel }
::= { gs2326plusQosPortEgressTagRemarkingMapTable 1 }
Gs2326plusQosPortEgressTagRemarkingMapEntry ::= SEQUENCE {
gs2326plusQosPortEgressTagRemarkingMapPort Integer32,
gs2326plusQosTagRemarkingQoSClass INTEGER,
gs2326plusQosTagRemarkingDPLevel INTEGER,
gs2326plusQosTagRemarkingPCP Integer32,
gs2326plusQosTagRemarkingDEI INTEGER
}
gs2326plusQosPortEgressTagRemarkingMapPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusQosPortEgressTagRemarkingMapEntry 1 }
gs2326plusQosTagRemarkingQoSClass OBJECT-TYPE
SYNTAX INTEGER {
class0(1),
class1(2),
class2(3),
class3(4),
class4(5),
class5(6),
class6(7),
class7(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-8,
QoS Class0: 1, QoS Class1: 2... "
::= { gs2326plusQosPortEgressTagRemarkingMapEntry 2 }
gs2326plusQosTagRemarkingDPLevel OBJECT-TYPE
SYNTAX INTEGER { level0(1), level1(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" range: 1-2,
DP Level0: 1, DP Level1: 2. "
::= { gs2326plusQosPortEgressTagRemarkingMapEntry 3 }
gs2326plusQosTagRemarkingPCP OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 0-7. "
::= { gs2326plusQosPortEgressTagRemarkingMapEntry 4 }
gs2326plusQosTagRemarkingDEI OBJECT-TYPE
SYNTAX INTEGER (0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" range: 0-1. "
::= { gs2326plusQosPortEgressTagRemarkingMapEntry 5 }
gs2326plusQosPortDSCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosPortDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS Port DSCP Configuration settings for all switch ports. "
::= { gs2326plusQos 5 }
gs2326plusQosPortDSCPEntry OBJECT-TYPE
SYNTAX Gs2326plusQosPortDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosPortDSCPPort }
::= { gs2326plusQosPortDSCPTable 1 }
Gs2326plusQosPortDSCPEntry ::= SEQUENCE {
gs2326plusQosPortDSCPPort Integer32,
gs2326plusQosPortDSCPIngressTranslate INTEGER,
gs2326plusQosPortDSCPIngressClassify INTEGER,
gs2326plusQosPortDSCPEgressRewrite INTEGER
}
gs2326plusQosPortDSCPPort OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusQosPortDSCPEntry 1 }
gs2326plusQosPortDSCPIngressTranslate OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure DSCP ingress translation mode.
0: disable,
1: enable,
default: disable. "
::= { gs2326plusQosPortDSCPEntry 2 }
gs2326plusQosPortDSCPIngressClassify OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Classification for a port have 4 different values.
range: 0-3,
0: disable,No Ingress DSCP Classification.
1: DSCP=0,Classify if incoming (or translated if enabled) DSCP is 0.
2: Selected,Classify only selected DSCP for which classification is
enabled as specified in DSCP Translation window for the specific DSCP.
3: All,Classify all DSCP.
default: disable. "
::= { gs2326plusQosPortDSCPEntry 3 }
gs2326plusQosPortDSCPEgressRewrite OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure the port egress rewriting mode.
range: 0-2
0: Disable,No Egress rewrite.
1: Enable, Rewrite enabled without remapping.
2: Remap DP Unaware , DSCP from analyzer is remapped and frame is
remarked with remapped DSCP value. The remapped DSCP value is always
taken from the DSCP Translation->Egress Remap DP0 table.
3: Remap DP Aware: DSCP from analyzer is remapped and frame is remarked
with remapped DSCP value. Depending on the DP level of the frame, the
remapped DSCP value is either taken from the DSCP Translation->Egress
Remap DP0 table or from the DSCP Translation->Egress Remap DP1 table.
default: disable. "
::= { gs2326plusQosPortDSCPEntry 4 }
gs2326plusQosDSCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS DSCP based QoS Ingress Classification settings for all switches. "
::= { gs2326plusQos 6 }
gs2326plusQosDSCPEntry OBJECT-TYPE
SYNTAX Gs2326plusQosDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosDSCPList }
::= { gs2326plusQosDSCPTable 1 }
Gs2326plusQosDSCPEntry ::= SEQUENCE {
gs2326plusQosDSCPList Integer32,
gs2326plusQosDSCP DisplayString,
gs2326plusQosDSCPTrust INTEGER,
gs2326plusQosDSCPQosClass Integer32,
gs2326plusQosDSCPDPL INTEGER
}
gs2326plusQosDSCPList OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" DSCP mapping table index(1-64). "
::= { gs2326plusQosDSCPEntry 1 }
gs2326plusQosDSCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of supported DSCP values are 64."
::= { gs2326plusQosDSCPEntry 2 }
gs2326plusQosDSCPTrust OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls whether a specific DSCP value is trusted. Only frames with
trusted DSCP values are mapped to a specific QoS class and Drop Precedence
Level. Frames with untrusted DSCP values are treated as a non-IP frame.
0: disable,
1: enable,
default: disable. "
::= { gs2326plusQosDSCPEntry 3 }
gs2326plusQosDSCPQosClass OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" QoS class.
range: 0-7,
default: 0. "
::= { gs2326plusQosDSCPEntry 4 }
gs2326plusQosDSCPDPL OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Drop Precedence Level.
range: 0-1,
default: disable. "
::= { gs2326plusQosDSCPEntry 5 }
gs2326plusQosDSCPTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosDSCPTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS DSCP Translation settings for all switches. "
::= { gs2326plusQos 7 }
gs2326plusQosDSCPTranslationEntry OBJECT-TYPE
SYNTAX Gs2326plusQosDSCPTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosDSCPTranslationList }
::= { gs2326plusQosDSCPTranslationTable 1 }
Gs2326plusQosDSCPTranslationEntry ::= SEQUENCE {
gs2326plusQosDSCPTranslationList Integer32,
gs2326plusQosDSCPTranslationDSCPBasedId DisplayString,
gs2326plusQosDSCPTranslationIngressTranslate Integer32,
gs2326plusQosDSCPTranslationIngressClassify INTEGER,
gs2326plusQosDSCPTranslationEgressRemapDP0 Integer32,
gs2326plusQosDSCPTranslationEgressRemapDP1 Integer32
}
gs2326plusQosDSCPTranslationList OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" DSCP translation table index(1-64). "
::= { gs2326plusQosDSCPTranslationEntry 1 }
gs2326plusQosDSCPTranslationDSCPBasedId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure global ingress DSCP translation table. "
::= { gs2326plusQosDSCPTranslationEntry 2 }
gs2326plusQosDSCPTranslationIngressTranslate OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DSCP at Ingress side can be translated to any of DSCP values.
range: 0-63,
default: 0. "
::= { gs2326plusQosDSCPTranslationEntry 3 }
gs2326plusQosDSCPTranslationIngressClassify OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure DSCP ingress classification.
0: disable,
1: enable,
default: disable. "
::= { gs2326plusQosDSCPTranslationEntry 4 }
gs2326plusQosDSCPTranslationEgressRemapDP0 OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the remapping for frames with DP level 0.
Select the DSCP value from select menu to which you want to remap.
range: 0-63,
default: 0. "
::= { gs2326plusQosDSCPTranslationEntry 5 }
gs2326plusQosDSCPTranslationEgressRemapDP1 OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the remapping for frames with DP level 1.
Select the DSCP value from select menu to which you want to remap.
range: 0-63,
default: 0. "
::= { gs2326plusQosDSCPTranslationEntry 6 }
gs2326plusQosDSCPClassificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosDSCPClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the mapping of QoS class to DSCP value. "
::= { gs2326plusQos 8 }
gs2326plusQosDSCPClassificationEntry OBJECT-TYPE
SYNTAX Gs2326plusQosDSCPClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosDSCPClassificationQoSClass, gs2326plusQosDSCPClassificationDPL }
::= { gs2326plusQosDSCPClassificationTable 1 }
Gs2326plusQosDSCPClassificationEntry ::= SEQUENCE {
gs2326plusQosDSCPClassificationQoSClass INTEGER,
gs2326plusQosDSCPClassificationDPL INTEGER,
gs2326plusQosDSCPClassificationDSCP Integer32
}
gs2326plusQosDSCPClassificationQoSClass OBJECT-TYPE
SYNTAX INTEGER {
class0(1),
class1(2),
class2(3),
class3(4),
class4(5),
class5(6),
class6(7),
class7(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Actual QoS class. Index 1~8 mean Qos Class 0~7."
::= { gs2326plusQosDSCPClassificationEntry 1 }
gs2326plusQosDSCPClassificationDPL OBJECT-TYPE
SYNTAX INTEGER(1|2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" DPL. Index 1~2 mean DPL 0~1."
::= { gs2326plusQosDSCPClassificationEntry 2 }
gs2326plusQosDSCPClassificationDSCP OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Select the classified DSCP value.
range: 0-63,
default: 0. "
::= { gs2326plusQosDSCPClassificationEntry 3 }
gs2326plusQosControlList OBJECT IDENTIFIER ::= { gs2326plusQos 9 }
gs2326plusQosQceCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create an Qos entry"
::= { gs2326plusQosControlList 1 }
gs2326plusQosQceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosQceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create Qos QCE entry. "
::= { gs2326plusQosControlList 2 }
gs2326plusQosQceEntry OBJECT-TYPE
SYNTAX Gs2326plusQosQceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosQceIndex }
::= { gs2326plusQosQceTable 1 }
Gs2326plusQosQceEntry ::= SEQUENCE {
gs2326plusQosQceIndex Integer32,
gs2326plusQosQceID Integer32,
gs2326plusQosQceNextID Integer32,
gs2326plusQosQcePortMembers DisplayString,
gs2326plusQosQceTag DisplayString,
gs2326plusQosQceVID DisplayString,
gs2326plusQosPCP DisplayString,
gs2326plusQosDEI DisplayString,
gs2326plusQosSMAC DisplayString,
gs2326plusQosDMACType DisplayString,
gs2326plusQosFrameType INTEGER,
gs2326plusQosMacEtherType DisplayString,
gs2326plusQosLLCSSAPAddr DisplayString,
gs2326plusQosLLCDSAPAddr DisplayString,
gs2326plusQosLLCControl DisplayString,
gs2326plusQosSNAPPID DisplayString,
gs2326plusQosIpv4Protocol DisplayString,
gs2326plusQosIpv4ProtocolValue Integer32,
gs2326plusQosIpv4ProtocolUDPSport DisplayString,
gs2326plusQosIpv4ProtocolUDPDport DisplayString,
gs2326plusQosIpv4ProtocolTCPSport DisplayString,
gs2326plusQosIpv4ProtocolTCPDport DisplayString,
gs2326plusQosIpv4Ip DisplayString,
gs2326plusQosIpv4Mask DisplayString,
gs2326plusQosIpv4IPFragment INTEGER,
gs2326plusQosIpv4DSCP DisplayString,
gs2326plusQosIpv6Protocol DisplayString,
gs2326plusQosIpv6ProtocolValue Integer32,
gs2326plusQosIpv6ProtocolUDPSport DisplayString,
gs2326plusQosIpv6ProtocolUDPDport DisplayString,
gs2326plusQosIpv6ProtocolTCPSport DisplayString,
gs2326plusQosIpv6ProtocolTCPDport DisplayString,
gs2326plusQosIpv6Ip DisplayString,
gs2326plusQosIpv6Mask DisplayString,
gs2326plusQosIpv6DSCP DisplayString,
gs2326plusQosActionClass Integer32,
gs2326plusQosActionDPL INTEGER,
gs2326plusQosActionDSCP Integer32,
gs2326plusQosQceRowStatus INTEGER
}
gs2326plusQosQceIndex OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusQosQceEntry 1 }
gs2326plusQosQceID OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If the QCE ID is specified and an entry with this QCE ID
already exists, the QCE will be modified. Otherwise, a
new QCE will be added.
range : 1 - 256. "
::= { gs2326plusQosQceEntry 2 }
gs2326plusQosQceNextID OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If the next QCE ID is non zero, the QCE will be placed
before this QCE in the list. If the next QCE ID is zero,
the QCE will be placed last in the list.
range : 1 - 256. "
::= { gs2326plusQosQceEntry 3 }
gs2326plusQosQcePortMembers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the ingress port of the QCE. Possible values are:
All: The QCE will match all ingress port.
Port: The QCE will match a specific ingress port.Format: 1,3-6."
::= { gs2326plusQosQceEntry 4 }
gs2326plusQosQceTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Value of Tag field can be 'Any', 'Untag' or 'Tag'. "
::= { gs2326plusQosQceEntry 5 }
gs2326plusQosQceVID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'. "
::= { gs2326plusQosQceEntry 6 }
gs2326plusQosPCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7)
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. "
::= { gs2326plusQosQceEntry 7 }
gs2326plusQosDEI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'. "
::= { gs2326plusQosQceEntry 8 }
gs2326plusQosSMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'. "
::= { gs2326plusQosQceEntry 9 }
gs2326plusQosDMACType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'. "
::= { gs2326plusQosQceEntry 10 }
gs2326plusQosFrameType OBJECT-TYPE
SYNTAX INTEGER {
any(1),
ethernet(2),
llc(3),
snap(4),
ipv4(5),
ipv6(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Frame Type can have any of the following values:
1: Any,
2: Ethernet,
3: LLC,
4: SNAP,
5: IPv4,
6: IPv6. "
::= { gs2326plusQosQceEntry 11 }
gs2326plusQosMacEtherType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' ,
but excluding 0x800(IPv4) and 0x86DD(IPv6),
range: 0000-FFFF,
default: Any."
::= { gs2326plusQosQceEntry 12 }
gs2326plusQosLLCSSAPAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any. "
::= { gs2326plusQosQceEntry 13 }
gs2326plusQosLLCDSAPAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any. "
::= { gs2326plusQosQceEntry 14 }
gs2326plusQosLLCControl OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid Control field can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any. "
::= { gs2326plusQosQceEntry 15 }
gs2326plusQosSNAPPID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any',
range: 0000-FFFF,
default: Any. "
::= { gs2326plusQosQceEntry 16 }
gs2326plusQosIpv4Protocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP protocol number: (Other, TCP or UDP) or 'Any'. "
::= { gs2326plusQosQceEntry 17 }
gs2326plusQosIpv4ProtocolValue OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Ipv4 Protocol is Other.
range: 0-255
default: 0. "
::= { gs2326plusQosQceEntry 18 }
gs2326plusQosIpv4ProtocolUDPSport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2326plusQosQceEntry 19 }
gs2326plusQosIpv4ProtocolUDPDport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2326plusQosQceEntry 20 }
gs2326plusQosIpv4ProtocolTCPSport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2326plusQosQceEntry 21 }
gs2326plusQosIpv4ProtocolTCPDport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2326plusQosQceEntry 22 }
gs2326plusQosIpv4Ip OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specific Source IP address in value format or value 0.0.0.0 is 'Any'.
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
(x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223.
If a port is configured to match on DMAC/DIP, this field is the
Destination IP address."
::= { gs2326plusQosQceEntry 23 }
gs2326plusQosIpv4Mask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specific IP address in mask format or value 0.0.0.0 is 'Any'. "
::= { gs2326plusQosQceEntry 24 }
gs2326plusQosIpv4IPFragment OBJECT-TYPE
SYNTAX INTEGER { any(0), no(1), yes(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IPv4 frame fragmented option:
2: yes,
1: no,
0: any. "
::= { gs2326plusQosQceEntry 25 }
gs2326plusQosIpv4DSCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63. "
::= { gs2326plusQosQceEntry 26 }
gs2326plusQosIpv6Protocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP protocol number: (Other, TCP or UDP) or 'Any'. "
::= { gs2326plusQosQceEntry 27 }
gs2326plusQosIpv6ProtocolValue OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" when IPv6 protocol is Other ,
range: 0-255. "
::= { gs2326plusQosQceEntry 28 }
gs2326plusQosIpv6ProtocolUDPSport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2326plusQosQceEntry 29 }
gs2326plusQosIpv6ProtocolUDPDport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2326plusQosQceEntry 30 }
gs2326plusQosIpv6ProtocolTCPSport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2326plusQosQceEntry 31 }
gs2326plusQosIpv6ProtocolTCPDport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. "
::= { gs2326plusQosQceEntry 32 }
gs2326plusQosIpv6Ip OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
If a port is configured to match on DMAC/DIP, this field is the
Destination IP address."
::= { gs2326plusQosQceEntry 33 }
gs2326plusQosIpv6Mask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. "
::= { gs2326plusQosQceEntry 34 }
gs2326plusQosIpv6DSCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63 including BE,
CS1-CS7, EF or AF11-AF43. "
::= { gs2326plusQosQceEntry 35 }
gs2326plusQosActionClass OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" QoS class: (0-7) or 8: Default."
::= { gs2326plusQosQceEntry 36 }
gs2326plusQosActionDPL OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DP Valid Drop Precedence Level can be (0-3) or 4: Default. "
::= { gs2326plusQosQceEntry 37 }
gs2326plusQosActionDSCP OBJECT-TYPE
SYNTAX Integer32(0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default. "
::= { gs2326plusQosQceEntry 38 }
gs2326plusQosQceRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 1: active2: notInservice 4: destroy"
::= { gs2326plusQosQceEntry 39 }
gs2326plusQosQceMoveID OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Move Qos,
default: 0
Qos ID must be exist.
range : 0 - 256."
::= { gs2326plusQosControlList 3 }
gs2326plusQosQceMoveNextID OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Move Qos,
default: 0
If the next Qos ID is non zero, the Qos will be placed before this Qos in the list.
If the next Qos ID is zero,the Qos will be placed last in the list.
range : 0 - 256. "
::= { gs2326plusQosControlList 4 }
gs2326plusQosQCLStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusQosQCLStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" configure the basic QoS DSCP Translation settings for all switches. "
::= { gs2326plusQos 10 }
gs2326plusQosQCLStatusEntry OBJECT-TYPE
SYNTAX Gs2326plusQosQCLStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusQosQCLStatusList }
::= { gs2326plusQosQCLStatusTable 1 }
Gs2326plusQosQCLStatusEntry ::= SEQUENCE {
gs2326plusQosQCLStatusList Integer32,
gs2326plusQosQCLStatusUser DisplayString,
gs2326plusQosQCLStatusQCEId DisplayString,
gs2326plusQosQCLStatusFrameType DisplayString,
gs2326plusQosQCLStatusPortlist DisplayString,
gs2326plusQosQCLStatusActionClass DisplayString,
gs2326plusQosQCLStatusActionDPL DisplayString,
gs2326plusQosQCLStatusActionDSCP DisplayString,
gs2326plusQosQCLStatusActionConflict DisplayString
}
gs2326plusQosQCLStatusList OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" QCL table index. "
::= { gs2326plusQosQCLStatusEntry 1}
gs2326plusQosQCLStatusUser OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the QCL user. "
::= { gs2326plusQosQCLStatusEntry 2 }
gs2326plusQosQCLStatusQCEId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the index of QCE. "
::= { gs2326plusQosQCLStatusEntry 3}
gs2326plusQosQCLStatusFrameType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the type of frame to look for incomming frames.
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC: Only (LLC) frames are allowed.
SNAP: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
IPv6: The QCE will match only IPV6 frames."
::= { gs2326plusQosQCLStatusEntry 4}
gs2326plusQosQCLStatusPortlist OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the list of ports configured with the QCE. "
::= { gs2326plusQosQCLStatusEntry 5}
gs2326plusQosQCLStatusActionClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Classified QoS class; if a frame matches the QCE it will be put in the
queue. "
::= { gs2326plusQosQCLStatusEntry 6}
gs2326plusQosQCLStatusActionDPL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Drop Precedence Level; if a frame matches the QCE then DP level will
set to value displayed under DPL column."
::= { gs2326plusQosQCLStatusEntry 7}
gs2326plusQosQCLStatusActionDSCP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column."
::= { gs2326plusQosQCLStatusEntry 8}
gs2326plusQosQCLStatusActionConflict OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column. "
::= { gs2326plusQosQCLStatusEntry 9}
gs2326plusQosStormControl OBJECT IDENTIFIER ::= { gs2326plusQos 11 }
gs2326plusQoSStormControlUC OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the storm control status for the Unicast frame type.
default: 0
0: disable
1: enable"
::= { gs2326plusQosStormControl 2 }
gs2326plusQoSStormControlUCRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8,
16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K,
512K or 1024K."
::= { gs2326plusQosStormControl 3 }
gs2326plusQoSStormControlMC OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the storm control status for the Multicast frame type.
default: 0
0: disable
1: enable"
::= { gs2326plusQosStormControl 4 }
gs2326plusQoSStormControlMCRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8,
16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K,
512K or 1024K."
::= { gs2326plusQosStormControl 5 }
gs2326plusQoSStormControlBC OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the storm control status for the Broadcast frame type.
default: 0
0: disable
1: enable"
::= { gs2326plusQosStormControl 6 }
gs2326plusQoSStormControlBCRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8,
16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K,
512K or 1024K."
::= { gs2326plusQosStormControl 7 }
gs2326plusVlan OBJECT IDENTIFIER ::= { gs2326plusConfiguration 15 }
gs2326plusVlanPorts OBJECT IDENTIFIER ::= { gs2326plusVlan 1 }
gs2326plusVlanPortsTPIDforCustomSport OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the TPID used for Custom S-ports. This is a global setting for
all the Custom S-ports.
range: 0x0600-0xffff,
default: 0x88a8. "
::= { gs2326plusVlanPorts 1 }
gs2326plusVlanPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusVlanPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan ports Configuration mode. "
::= { gs2326plusVlanPorts 2 }
gs2326plusVlanPortsEntry OBJECT-TYPE
SYNTAX Gs2326plusVlanPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusVlanPortsPort }
::= { gs2326plusVlanPortsTable 1 }
Gs2326plusVlanPortsEntry ::= SEQUENCE {
gs2326plusVlanPortsPort Integer32,
gs2326plusVlanPortsPVID Integer32,
gs2326plusVlanPortsFrameType INTEGER,
gs2326plusVlanPortsIngressFilter INTEGER,
gs2326plusVlanPortsEgressRule INTEGER,
gs2326plusVlanPortsPortType INTEGER
}
gs2326plusVlanPortsPort OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusVlanPortsEntry 1 }
gs2326plusVlanPortsPVID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure PVID.
range: 1-4094,
default: 1. "
::= { gs2326plusVlanPortsEntry 2 }
gs2326plusVlanPortsFrameType OBJECT-TYPE
SYNTAX INTEGER { all(0), tagged(1), untagged(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure frame type of switch ports.
0: all,
1: tagged,
2: untagged,
default: all. "
::= { gs2326plusVlanPortsEntry 3 }
gs2326plusVlanPortsIngressFilter OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure ingress filtering of switch ports.
0: disable,
1: enable,
default:disable . "
::= { gs2326plusVlanPortsEntry 4 }
gs2326plusVlanPortsEgressRule OBJECT-TYPE
SYNTAX INTEGER { access(0), hybrid(1), trunk(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure egress-rule of switch ports.
0: access,
1: hybrid,
2: trunk"
::= { gs2326plusVlanPortsEntry 5 }
gs2326plusVlanPortsPortType OBJECT-TYPE
SYNTAX INTEGER { cPort(0), sCustomPort(1), sPort(2), unaware(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure port type of switch ports.
0: c-port,
1: s-custom-port,
2: s-port,
3: unaware.
default: c-port. "
::= { gs2326plusVlanPortsEntry 6 }
gs2326plusVlanPrivateVLAN OBJECT IDENTIFIER ::= { gs2326plusVlan 2 }
gs2326plusVlanPrivateVLANMembership OBJECT IDENTIFIER ::= { gs2326plusVlanPrivateVLAN 1 }
gs2326plusVlanPrivateVLANMembershipCreate OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create a pvlan"
::= { gs2326plusVlanPrivateVLANMembership 1 }
gs2326plusVlanPrivateVLANMembershipTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusVlanPrivateVLANMembershipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Private Vlan Configuration. "
::= { gs2326plusVlanPrivateVLANMembership 2 }
gs2326plusVlanPrivateVLANMembershipEntry OBJECT-TYPE
SYNTAX Gs2326plusVlanPrivateVLANMembershipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusVlanPrivateVLANIndex }
::= { gs2326plusVlanPrivateVLANMembershipTable 1 }
Gs2326plusVlanPrivateVLANMembershipEntry ::= SEQUENCE {
gs2326plusVlanPrivateVLANIndex Integer32,
gs2326plusVlanPrivateVLANID Integer32,
gs2326plusVlanPrivateVLANMemberships DisplayString,
gs2326plusVlanPrivateVLANRowStatus INTEGER
}
gs2326plusVlanPrivateVLANIndex OBJECT-TYPE
SYNTAX Integer32(1..52)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"private VLAN Index. "
::= { gs2326plusVlanPrivateVLANMembershipEntry 1 }
gs2326plusVlanPrivateVLANID OBJECT-TYPE
SYNTAX Integer32(1..52)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the ID of this particular private VLAN.
The CreateEntry can be modify, the other entry can't be modify."
::= { gs2326plusVlanPrivateVLANMembershipEntry 2 }
gs2326plusVlanPrivateVLANMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To include the ports in a Private VLAN"
::= { gs2326plusVlanPrivateVLANMembershipEntry 3 }
gs2326plusVlanPrivateVLANRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2326plusVlanPrivateVLANMembershipEntry 4 }
gs2326plusVlanPortIsolationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusVlanPortIsolationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2326plusVlanPrivateVLAN 2 }
gs2326plusVlanPortIsolationEntry OBJECT-TYPE
SYNTAX Gs2326plusVlanPortIsolationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusVlanPortIsolationPort }
::= { gs2326plusVlanPortIsolationTable 1 }
Gs2326plusVlanPortIsolationEntry ::= SEQUENCE {
gs2326plusVlanPortIsolationPort Integer32,
gs2326plusVlanPortIsolation INTEGER
}
gs2326plusVlanPortIsolationPort OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusVlanPortIsolationEntry 1 }
gs2326plusVlanPortIsolation OBJECT-TYPE
SYNTAX INTEGER{ disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2326plusVlanPortIsolationEntry 2 }
gs2326plusMACbasedVLAN OBJECT IDENTIFIER ::= { gs2326plusVlan 3 }
gs2326plusMACbasedVLANConf OBJECT IDENTIFIER ::= { gs2326plusMACbasedVLAN 1 }
gs2326plusMACbasedVLANConfCreate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only) 1 : Create MAC base vlan"
::= { gs2326plusMACbasedVLANConf 1 }
gs2326plusMACbasedVLANConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMACbasedVLANConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2326plusMACbasedVLANConf 2 }
gs2326plusMACbasedVLANConfEntry OBJECT-TYPE
SYNTAX Gs2326plusMACbasedVLANConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMACbasedVLANIndex }
::= { gs2326plusMACbasedVLANConfTable 1 }
Gs2326plusMACbasedVLANConfEntry ::= SEQUENCE {
gs2326plusMACbasedVLANIndex Integer32,
gs2326plusMACbasedVLANMACAddress MacAddress,
gs2326plusMACbasedVLANID Integer32,
gs2326plusMACbasedMemberships DisplayString,
gs2326plusMACbaseRowStatus INTEGER
}
gs2326plusMACbasedVLANIndex OBJECT-TYPE
SYNTAX Integer32(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN ID. "
::= { gs2326plusMACbasedVLANConfEntry 1 }
gs2326plusMACbasedVLANMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address.
The CreateEntry can be modify, the other entry can't be modify."
::= { gs2326plusMACbasedVLANConfEntry 2 }
gs2326plusMACbasedVLANID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN ID. "
::= { gs2326plusMACbasedVLANConfEntry 3 }
gs2326plusMACbasedMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports are displayed for each MAC-based VLAN entry.
To include the port in a MAC-based VLAN"
::= { gs2326plusMACbasedVLANConfEntry 4 }
gs2326plusMACbaseRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2326plusMACbasedVLANConfEntry 5 }
gs2326plusIGMPSnooping OBJECT IDENTIFIER ::= { gs2326plusConfiguration 16 }
gs2326plusIGMPSnoopingBasic OBJECT IDENTIFIER ::= { gs2326plusIGMPSnooping 1 }
gs2326plusIGMPSnoopingEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the Global IGMP Snooping"
::= { gs2326plusIGMPSnoopingBasic 1 }
gs2326plusIGMPSnoopingUnregisteredIPMCv4Flooding OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable unregistered IPMCv4 traffic flooding. "
::= { gs2326plusIGMPSnoopingBasic 2 }
gs2326plusIGMPSnoopingSSMIPRangeAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range. "
::= { gs2326plusIGMPSnoopingBasic 3 }
gs2326plusIGMPSnoopingSSMIPRangeValue OBJECT-TYPE
SYNTAX Integer32(4..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range value. "
::= { gs2326plusIGMPSnoopingBasic 4 }
gs2326plusIGMPSnoopingProxyEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IGMP Proxy. This feature can be used to avoid forwarding
unnecessary join and leave messages to the router side. "
::= { gs2326plusIGMPSnoopingBasic 5 }
gs2326plusIGMPSnoopingPortRelatedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIGMPSnoopingPortRelatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure IGMP Snooping Port Related Configuration. "
::= { gs2326plusIGMPSnoopingBasic 6 }
gs2326plusIGMPSnoopingPortRelatedEntry OBJECT-TYPE
SYNTAX Gs2326plusIGMPSnoopingPortRelatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2326plusIGMPSnoopingPortRelatedTable 1 }
Gs2326plusIGMPSnoopingPortRelatedEntry ::= SEQUENCE {
gs2326plusIGMPSnoopingRouterPort INTEGER,
gs2326plusIGMPSnoopingFastLeave INTEGER,
gs2326plusIGMPSnoopingThrottling Integer32
}
gs2326plusIGMPSnoopingRouterPort OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP
querier. If an aggregation member port is selected as a router port, the
whole aggregation will act as a router port. "
::= { gs2326plusIGMPSnoopingPortRelatedEntry 1 }
gs2326plusIGMPSnoopingFastLeave OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the fast leave on the port. "
::= { gs2326plusIGMPSnoopingPortRelatedEntry 2 }
gs2326plusIGMPSnoopingThrottling OBJECT-TYPE
SYNTAX Integer32(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable to limit the number of multicast groups to which a switch port can belong.
0: unlimited"
::= { gs2326plusIGMPSnoopingPortRelatedEntry 3 }
gs2326plusIGMPSnoopingVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIGMPSnoopingVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure IGMP Snooping Vlan Configuration. "
::= { gs2326plusIGMPSnooping 2 }
gs2326plusIGMPSnoopingVLANEntry OBJECT-TYPE
SYNTAX Gs2326plusIGMPSnoopingVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusIGMPSnoopingVLANID }
::= { gs2326plusIGMPSnoopingVLANTable 1 }
Gs2326plusIGMPSnoopingVLANEntry ::= SEQUENCE {
gs2326plusIGMPSnoopingVLANID Integer32,
gs2326plusIGMPSnoopingVLANEnable INTEGER,
gs2326plusIGMPSnoopingVLANIGMPQuerier INTEGER,
gs2326plusIGMPSnoopingVLANCompatibility INTEGER,
gs2326plusIGMPSnoopingVLANRV Integer32,
gs2326plusIGMPSnoopingVLANQI Integer32,
gs2326plusIGMPSnoopingVLANQRI Integer32,
gs2326plusIGMPSnoopingVLANLLQI Integer32,
gs2326plusIGMPSnoopingVLANURI Integer32
}
gs2326plusIGMPSnoopingVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID of the entry"
::= { gs2326plusIGMPSnoopingVLANEntry 1 }
gs2326plusIGMPSnoopingVLANEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the per-VLAN IGMP Snooping. Up to 32 VLANs can be
selected for IGMP Snooping. "
::= { gs2326plusIGMPSnoopingVLANEntry 2 }
gs2326plusIGMPSnoopingVLANIGMPQuerier OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the IGMP Querier in the VLAN. "
::= { gs2326plusIGMPSnoopingVLANEntry 3 }
gs2326plusIGMPSnoopingVLANCompatibility OBJECT-TYPE
SYNTAX INTEGER { igmpAuto(0), forcedIGMPv1(1), forcedIGMPv2(2), forcedIGMPv3(3), none(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Compatibility is maintained by hosts and routers taking appropriate
actions depending on the versions of IGMP operating on hosts and routers
within a network. The allowed selection is IGMP-Auto, Forced IGMPv1,
Forced IGMPv2, Forced IGMPv3, default compatibility value is IGMP-Auto. "
::= { gs2326plusIGMPSnoopingVLANEntry 4 }
gs2326plusIGMPSnoopingVLANRV OBJECT-TYPE
SYNTAX Integer32(-1|1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Robustness Variable. The Robustness Variable allows tuning for the
expected packet loss on a network. The allowed range is 1 to 255, default
robustness variable value is 2. (-1: none)"
::= { gs2326plusIGMPSnoopingVLANEntry 5 }
gs2326plusIGMPSnoopingVLANQI OBJECT-TYPE
SYNTAX Integer32(-1|1..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query Interval. The Query Interval is the interval between General
Queries sent by the Querier. The allowed range is 1 to 31744 seconds,
default query interval is 125 seconds. (-1: none)"
::= { gs2326plusIGMPSnoopingVLANEntry 6 }
gs2326plusIGMPSnoopingVLANQRI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query Response Interval. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries. The
allowed range is 0 to 31744 in tenths of seconds, default query response
interval is 100 in tenths of seconds (10 seconds). (-1: none)"
::= { gs2326plusIGMPSnoopingVLANEntry 7 }
gs2326plusIGMPSnoopingVLANLLQI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLQI (LMQI for IGMP). Last Member Query Interval. The Last Member Query
Time is the time value represented by the Last Member Query Interval,
multiplied by the Last Member Query Count. The allowed range is 0 to
31744 in tenths of seconds, default last member query interval is 10 in
tenths of seconds (1 second). (-1: none)"
::= { gs2326plusIGMPSnoopingVLANEntry 8 }
gs2326plusIGMPSnoopingVLANURI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report
interval is 1 second. (-1: none)"
::= { gs2326plusIGMPSnoopingVLANEntry 9 }
gs2326plusIGMPSnoopingPortGroupFiltering OBJECT IDENTIFIER ::= { gs2326plusIGMPSnooping 3 }
gs2326plusIGMPSnoopingPortGroupFilteringCreate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only) 1 : Create IGMP Snooping Port Group Filtering "
::= { gs2326plusIGMPSnoopingPortGroupFiltering 1 }
gs2326plusIGMPSnoopingPortGroupFilteringTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIGMPSnoopingPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure IGMP Snooping port group filtering. "
::= { gs2326plusIGMPSnoopingPortGroupFiltering 2 }
gs2326plusIGMPSnoopingPortGroupFilteringEntry OBJECT-TYPE
SYNTAX Gs2326plusIGMPSnoopingPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusIGMPSnoopingPortGroupFilteringIndex }
::= { gs2326plusIGMPSnoopingPortGroupFilteringTable 1 }
Gs2326plusIGMPSnoopingPortGroupFilteringEntry ::= SEQUENCE {
gs2326plusIGMPSnoopingPortGroupFilteringIndex Integer32,
gs2326plusIGMPSnoopingPortGroupFilteringPort Integer32,
gs2326plusIGMPSnoopingPortGroupFilteringGroups DisplayString,
gs2326plusIGMPSnoopingPortGroupFilteringRowStatus INTEGER
}
gs2326plusIGMPSnoopingPortGroupFilteringIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IGMP Snooping Port Group Filtering Configuration Index. "
::= { gs2326plusIGMPSnoopingPortGroupFilteringEntry 1 }
gs2326plusIGMPSnoopingPortGroupFilteringPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logical port for the settings. "
::= { gs2326plusIGMPSnoopingPortGroupFilteringEntry 2 }
gs2326plusIGMPSnoopingPortGroupFilteringGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Multicast Group that will be filtered. "
::= { gs2326plusIGMPSnoopingPortGroupFilteringEntry 3 }
gs2326plusIGMPSnoopingPortGroupFilteringRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2326plusIGMPSnoopingPortGroupFilteringEntry 4 }
gs2326plusIGMPSnoopingStatus OBJECT IDENTIFIER ::= { gs2326plusIGMPSnooping 4 }
gs2326plusIGMPSnoopingstatisticClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all Statistics counters."
::= { gs2326plusIGMPSnoopingStatus 1 }
gs2326plusIGMPSnoopingstatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIGMPSnoopingstatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2326plusIGMPSnoopingStatus 2 }
gs2326plusIGMPSnoopingstatisticEntry OBJECT-TYPE
SYNTAX Gs2326plusIGMPSnoopingstatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusIGMPSnoopingstatisticVLANID }
::= { gs2326plusIGMPSnoopingstatisticTable 1 }
Gs2326plusIGMPSnoopingstatisticEntry ::= SEQUENCE {
gs2326plusIGMPSnoopingstatisticVLANID Integer32,
gs2326plusIGMPSnoopingstatisticQuerierVersion DisplayString,
gs2326plusIGMPSnoopingstatisticHostVersion DisplayString,
gs2326plusIGMPSnoopingstatisticQuerierStatus DisplayString,
gs2326plusIGMPSnoopingstatisticQueriesTransmitted Counter32,
gs2326plusIGMPSnoopingstatisticQueriesReceived Counter32,
gs2326plusIGMPSnoopingstatisticV1ReportsReceived Counter32,
gs2326plusIGMPSnoopingstatisticV2ReportsReceived Counter32,
gs2326plusIGMPSnoopingstatisticV3ReportsReceived Counter32,
gs2326plusIGMPSnoopingstatisticV2LeavesReceived Counter32
}
gs2326plusIGMPSnoopingstatisticVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the entry. "
::= { gs2326plusIGMPSnoopingstatisticEntry 1 }
gs2326plusIGMPSnoopingstatisticQuerierVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working Querier Version currently. "
::= { gs2326plusIGMPSnoopingstatisticEntry 2 }
gs2326plusIGMPSnoopingstatisticHostVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working Host Version currently. "
::= { gs2326plusIGMPSnoopingstatisticEntry 3 }
gs2326plusIGMPSnoopingstatisticQuerierStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific
interface is administratively disabled. "
::= { gs2326plusIGMPSnoopingstatisticEntry 4 }
gs2326plusIGMPSnoopingstatisticQueriesTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Transmitted Queries. "
::= { gs2326plusIGMPSnoopingstatisticEntry 5 }
gs2326plusIGMPSnoopingstatisticQueriesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received Queries. "
::= { gs2326plusIGMPSnoopingstatisticEntry 6 }
gs2326plusIGMPSnoopingstatisticV1ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V1 Reports. "
::= { gs2326plusIGMPSnoopingstatisticEntry 7 }
gs2326plusIGMPSnoopingstatisticV2ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Reports. "
::= { gs2326plusIGMPSnoopingstatisticEntry 8 }
gs2326plusIGMPSnoopingstatisticV3ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V3 Reports. "
::= { gs2326plusIGMPSnoopingstatisticEntry 9 }
gs2326plusIGMPSnoopingstatisticV2LeavesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Leaves. "
::= { gs2326plusIGMPSnoopingstatisticEntry 10 }
gs2326plusIGMPSnoopingRouterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIGMPSnoopingRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2326plusIGMPSnoopingStatus 3 }
gs2326plusIGMPSnoopingRouterPortEntry OBJECT-TYPE
SYNTAX Gs2326plusIGMPSnoopingRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2326plusIGMPSnoopingRouterPortTable 1 }
Gs2326plusIGMPSnoopingRouterPortEntry ::= SEQUENCE {
gs2326plusIGMPSnoopingRouterPortStatus DisplayString
}
gs2326plusIGMPSnoopingRouterPortStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP
querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port. "
::= { gs2326plusIGMPSnoopingRouterPortEntry 1 }
gs2326plusIGMPSnoopingGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIGMPSnoopingGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IGMP Snooping Groups Information . "
::= { gs2326plusIGMPSnooping 5 }
gs2326plusIGMPSnoopingGroupsEntry OBJECT-TYPE
SYNTAX Gs2326plusIGMPSnoopingGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusIGMPSnoopingGroupsIndex }
::= { gs2326plusIGMPSnoopingGroupsTable 1 }
Gs2326plusIGMPSnoopingGroupsEntry ::= SEQUENCE {
gs2326plusIGMPSnoopingGroupsIndex Integer32,
gs2326plusIGMPSnoopingGroupsVLANID Integer32,
gs2326plusIGMPSnoopingGroups InetAddress,
gs2326plusIGMPSnoopingGroupsMemberships DisplayString
}
gs2326plusIGMPSnoopingGroupsIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IGMP Snooping Groups Index"
::= { gs2326plusIGMPSnoopingGroupsEntry 1 }
gs2326plusIGMPSnoopingGroupsVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2326plusIGMPSnoopingGroupsEntry 2 }
gs2326plusIGMPSnoopingGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2326plusIGMPSnoopingGroupsEntry 3 }
gs2326plusIGMPSnoopingGroupsMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2326plusIGMPSnoopingGroupsEntry 4 }
gs2326plusIGMPSnoopingSSMTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIGMPSnoopingSSMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP SFM (Source-Filtered Multicast) Information Table also contains
the SSM (Source-Specific Multicast) information. This table is sorted
first by VLAN ID, then by group, and then by Port. Different source
addresses belong to the same group are treated as single entry."
::= { gs2326plusIGMPSnooping 6 }
gs2326plusIGMPSnoopingSSMEntry OBJECT-TYPE
SYNTAX Gs2326plusIGMPSnoopingSSMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusIGMPSnoopingSSMIndex }
::= { gs2326plusIGMPSnoopingSSMTable 1 }
Gs2326plusIGMPSnoopingSSMEntry ::= SEQUENCE {
gs2326plusIGMPSnoopingSSMIndex Integer32,
gs2326plusIGMPSnoopingSSMVLANID Integer32,
gs2326plusIGMPSnoopingSSMGroup DisplayString,
gs2326plusIGMPSnoopingSSMPort Integer32,
gs2326plusIGMPSnoopingSSMMode DisplayString,
gs2326plusIGMPSnoopingSSMSourceAddress DisplayString,
gs2326plusIGMPSnoopingSSMType DisplayString
}
gs2326plusIGMPSnoopingSSMIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IGMP Snooping SSM Index"
::= { gs2326plusIGMPSnoopingSSMEntry 1 }
gs2326plusIGMPSnoopingSSMVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2326plusIGMPSnoopingSSMEntry 2 }
gs2326plusIGMPSnoopingSSMGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2326plusIGMPSnoopingSSMEntry 3 }
gs2326plusIGMPSnoopingSSMPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2326plusIGMPSnoopingSSMEntry 4 }
gs2326plusIGMPSnoopingSSMMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the filtering mode maintained per (VLAN ID, port number,
Group Address) basis. It can be either Include or Exclude."
::= { gs2326plusIGMPSnoopingSSMEntry 5 }
gs2326plusIGMPSnoopingSSMSourceAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of the source. Currently, system limits the total number of
IP source addresses for filtering to be 128."
::= { gs2326plusIGMPSnoopingSSMEntry 6 }
gs2326plusIGMPSnoopingSSMType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Type. It can be either Allow or Deny."
::= { gs2326plusIGMPSnoopingSSMEntry 7 }
gs2326plusMLDSnooping OBJECT IDENTIFIER ::= { gs2326plusConfiguration 17 }
gs2326plusMLDSnoopingBasic OBJECT IDENTIFIER ::= { gs2326plusMLDSnooping 1 }
gs2326plusMLDSnoopingEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the Global MLD Snooping"
::= { gs2326plusMLDSnoopingBasic 1 }
gs2326plusMLDSnoopingUnregisteredIPMCv6Flooding OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable unregistered IPMCv6 traffic flooding. "
::= { gs2326plusMLDSnoopingBasic 2 }
gs2326plusMLDSnoopingSSMIPRangeAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range. "
::= { gs2326plusMLDSnoopingBasic 3 }
gs2326plusMLDSnoopingSSMIPRangeValue OBJECT-TYPE
SYNTAX Integer32(8..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range value. "
::= { gs2326plusMLDSnoopingBasic 4 }
gs2326plusMLDSnoopingProxyEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable MLD Proxy. This feature can be used to avoid forwarding
unnecessary join and leave messages to the router side. "
::= { gs2326plusMLDSnoopingBasic 5 }
gs2326plusMLDSnoopingPortRelatedTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMLDSnoopingPortRelatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MLD Snooping Port Related Configuration. "
::= { gs2326plusMLDSnoopingBasic 6 }
gs2326plusMLDSnoopingPortRelatedEntry OBJECT-TYPE
SYNTAX Gs2326plusMLDSnoopingPortRelatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2326plusMLDSnoopingPortRelatedTable 1 }
Gs2326plusMLDSnoopingPortRelatedEntry ::= SEQUENCE {
gs2326plusMLDSnoopingRouterPort INTEGER,
gs2326plusMLDSnoopingFastLeave INTEGER,
gs2326plusMLDSnoopingThrottling Integer32
}
gs2326plusMLDSnoopingRouterPort OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP
querier. If an aggregation member port is selected as a router port, the
whole aggregation will act as a router port. "
::= { gs2326plusMLDSnoopingPortRelatedEntry 1 }
gs2326plusMLDSnoopingFastLeave OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the fast leave on the port. "
::= { gs2326plusMLDSnoopingPortRelatedEntry 2 }
gs2326plusMLDSnoopingThrottling OBJECT-TYPE
SYNTAX Integer32(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable to limit the number of multicast groups to which a switch port can belong.
0: unlimited"
::= { gs2326plusMLDSnoopingPortRelatedEntry 3 }
gs2326plusMLDSnoopingVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMLDSnoopingVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MLD Snooping Vlan Configuration. "
::= { gs2326plusMLDSnooping 2 }
gs2326plusMLDSnoopingVLANEntry OBJECT-TYPE
SYNTAX Gs2326plusMLDSnoopingVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMLDSnoopingVLANID }
::= { gs2326plusMLDSnoopingVLANTable 1 }
Gs2326plusMLDSnoopingVLANEntry ::= SEQUENCE {
gs2326plusMLDSnoopingVLANID Integer32,
gs2326plusMLDSnoopingVLANEnable INTEGER,
gs2326plusMLDSnoopingVLANIGMPQuerier INTEGER,
gs2326plusMLDSnoopingVLANCompatibility INTEGER,
gs2326plusMLDSnoopingVLANRV Integer32,
gs2326plusMLDSnoopingVLANQI Integer32,
gs2326plusMLDSnoopingVLANQRI Integer32,
gs2326plusMLDSnoopingVLANLLQI Integer32,
gs2326plusMLDSnoopingVLANURI Integer32
}
gs2326plusMLDSnoopingVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID of the entry"
::= { gs2326plusMLDSnoopingVLANEntry 1 }
gs2326plusMLDSnoopingVLANEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the per-VLAN MLD Snooping. Up to 32 VLANs can be
selected for MLD Snooping. "
::= { gs2326plusMLDSnoopingVLANEntry 2 }
gs2326plusMLDSnoopingVLANIGMPQuerier OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the MLD Querier in the VLAN. "
::= { gs2326plusMLDSnoopingVLANEntry 3 }
gs2326plusMLDSnoopingVLANCompatibility OBJECT-TYPE
SYNTAX INTEGER { mldAuto(0), forcedMLDv1(1), forcedMLDv2(2), none(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Compatibility is maintained by hosts and routers taking appropriate
actions depending on the versions of IGMP operating on hosts and routers
within a network. The allowed selection is MLD-Auto, Forced MLDv1,
Forced MLDv2, default compatibility value is IGMP-Auto. "
::= { gs2326plusMLDSnoopingVLANEntry 4 }
gs2326plusMLDSnoopingVLANRV OBJECT-TYPE
SYNTAX Integer32(-1|1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Robustness Variable. The Robustness Variable allows tuning for the
expected packet loss on a network. The allowed range is 1 to 255, default
robustness variable value is 2. (-1: none)"
::= { gs2326plusMLDSnoopingVLANEntry 5 }
gs2326plusMLDSnoopingVLANQI OBJECT-TYPE
SYNTAX Integer32(-1|1..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query Interval. The Query Interval is the interval between General
Queries sent by the Querier. The allowed range is 1 to 31744 seconds,
default query interval is 125 seconds. (-1: none)"
::= { gs2326plusMLDSnoopingVLANEntry 6 }
gs2326plusMLDSnoopingVLANQRI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query Response Interval. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries. The
allowed range is 0 to 31744 in tenths of seconds, default query response
interval is 100 in tenths of seconds (10 seconds). (-1: none)"
::= { gs2326plusMLDSnoopingVLANEntry 7 }
gs2326plusMLDSnoopingVLANLLQI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLQI (LMQI for MLD). Last Member Query Interval. The Last Member Query
Time is the time value represented by the Last Member Query Interval,
multiplied by the Last Member Query Count. The allowed range is 0 to
31744 in tenths of seconds, default last member query interval is 10 in
tenths of seconds (1 second). (-1: none)"
::= { gs2326plusMLDSnoopingVLANEntry 8 }
gs2326plusMLDSnoopingVLANURI OBJECT-TYPE
SYNTAX Integer32(-1|0..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report
interval is 1 second. (-1: none)"
::= { gs2326plusMLDSnoopingVLANEntry 9 }
gs2326plusMLDSnoopingPortGroupFiltering OBJECT IDENTIFIER ::= { gs2326plusMLDSnooping 3 }
gs2326plusMLDSnoopingPortGroupFilteringCreate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only) 1 : Create MLD Snooping Port Group Filtering "
::= { gs2326plusMLDSnoopingPortGroupFiltering 1 }
gs2326plusMLDSnoopingPortGroupFilteringTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMLDSnoopingPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MLD Snooping port group filtering. "
::= { gs2326plusMLDSnoopingPortGroupFiltering 2 }
gs2326plusMLDSnoopingPortGroupFilteringEntry OBJECT-TYPE
SYNTAX Gs2326plusMLDSnoopingPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMLDSnoopingPortGroupFilteringIndex }
::= { gs2326plusMLDSnoopingPortGroupFilteringTable 1 }
Gs2326plusMLDSnoopingPortGroupFilteringEntry ::= SEQUENCE {
gs2326plusMLDSnoopingPortGroupFilteringIndex Integer32,
gs2326plusMLDSnoopingPortGroupFilteringPort Integer32,
gs2326plusMLDSnoopingPortGroupFilteringGroups DisplayString,
gs2326plusMLDSnoopingPortGroupFilteringRowStatus INTEGER
}
gs2326plusMLDSnoopingPortGroupFilteringIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MLD Snooping Port Group Filtering Configuration Index. "
::= { gs2326plusMLDSnoopingPortGroupFilteringEntry 1 }
gs2326plusMLDSnoopingPortGroupFilteringPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logical port for the settings. "
::= { gs2326plusMLDSnoopingPortGroupFilteringEntry 2 }
gs2326plusMLDSnoopingPortGroupFilteringGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Multicast Group that will be filtered. "
::= { gs2326plusMLDSnoopingPortGroupFilteringEntry 3 }
gs2326plusMLDSnoopingPortGroupFilteringRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2326plusMLDSnoopingPortGroupFilteringEntry 4 }
gs2326plusMLDSnoopingStatus OBJECT IDENTIFIER ::= { gs2326plusMLDSnooping 4 }
gs2326plusMLDSnoopingstatisticClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all Statistics counters."
::= { gs2326plusMLDSnoopingStatus 1 }
gs2326plusMLDSnoopingstatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMLDSnoopingstatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2326plusMLDSnoopingStatus 2 }
gs2326plusMLDSnoopingstatisticEntry OBJECT-TYPE
SYNTAX Gs2326plusMLDSnoopingstatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMLDSnoopingstatisticVLANID }
::= { gs2326plusMLDSnoopingstatisticTable 1 }
Gs2326plusMLDSnoopingstatisticEntry ::= SEQUENCE {
gs2326plusMLDSnoopingstatisticVLANID Integer32,
gs2326plusMLDSnoopingstatisticQuerierVersion DisplayString,
gs2326plusMLDSnoopingstatisticHostVersion DisplayString,
gs2326plusMLDSnoopingstatisticQuerierStatus DisplayString,
gs2326plusMLDSnoopingstatisticQueriesTransmitted Counter32,
gs2326plusMLDSnoopingstatisticQueriesReceived Counter32,
gs2326plusMLDSnoopingstatisticV1ReportsReceived Counter32,
gs2326plusMLDSnoopingstatisticV2ReportsReceived Counter32,
gs2326plusMLDSnoopingstatisticV1LeavesReceived Counter32
}
gs2326plusMLDSnoopingstatisticVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the entry. "
::= { gs2326plusMLDSnoopingstatisticEntry 1 }
gs2326plusMLDSnoopingstatisticQuerierVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working Querier Version currently. "
::= { gs2326plusMLDSnoopingstatisticEntry 2 }
gs2326plusMLDSnoopingstatisticHostVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working Host Version currently. "
::= { gs2326plusMLDSnoopingstatisticEntry 3 }
gs2326plusMLDSnoopingstatisticQuerierStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific
interface is administratively disabled. "
::= { gs2326plusMLDSnoopingstatisticEntry 4 }
gs2326plusMLDSnoopingstatisticQueriesTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Transmitted Queries. "
::= { gs2326plusMLDSnoopingstatisticEntry 5 }
gs2326plusMLDSnoopingstatisticQueriesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received Queries. "
::= { gs2326plusMLDSnoopingstatisticEntry 6 }
gs2326plusMLDSnoopingstatisticV1ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V1 Reports. "
::= { gs2326plusMLDSnoopingstatisticEntry 7 }
gs2326plusMLDSnoopingstatisticV2ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Reports. "
::= { gs2326plusMLDSnoopingstatisticEntry 8 }
gs2326plusMLDSnoopingstatisticV1LeavesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V1 Leaves. "
::= { gs2326plusMLDSnoopingstatisticEntry 9 }
gs2326plusMLDSnoopingRouterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMLDSnoopingRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure Vlan Port Isolation Configuration. "
::= { gs2326plusMLDSnoopingStatus 3 }
gs2326plusMLDSnoopingRouterPortEntry OBJECT-TYPE
SYNTAX Gs2326plusMLDSnoopingRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2326plusMLDSnoopingRouterPortTable 1 }
Gs2326plusMLDSnoopingRouterPortEntry ::= SEQUENCE {
gs2326plusMLDSnoopingRouterPortStatus DisplayString
}
gs2326plusMLDSnoopingRouterPortStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP
querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port. "
::= { gs2326plusMLDSnoopingRouterPortEntry 1 }
gs2326plusMLDSnoopingGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMLDSnoopingGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MLD Snooping Groups Information . "
::= { gs2326plusMLDSnooping 5 }
gs2326plusMLDSnoopingGroupsEntry OBJECT-TYPE
SYNTAX Gs2326plusMLDSnoopingGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMLDSnoopingGroupsIndex }
::= { gs2326plusMLDSnoopingGroupsTable 1 }
Gs2326plusMLDSnoopingGroupsEntry ::= SEQUENCE {
gs2326plusMLDSnoopingGroupsIndex Integer32,
gs2326plusMLDSnoopingGroupsVLANID Integer32,
gs2326plusMLDSnoopingGroups InetAddress,
gs2326plusMLDSnoopingGroupsMemberships DisplayString
}
gs2326plusMLDSnoopingGroupsIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MLD Snooping Groups Index"
::= { gs2326plusMLDSnoopingGroupsEntry 1 }
gs2326plusMLDSnoopingGroupsVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2326plusMLDSnoopingGroupsEntry 2 }
gs2326plusMLDSnoopingGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2326plusMLDSnoopingGroupsEntry 3 }
gs2326plusMLDSnoopingGroupsMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2326plusMLDSnoopingGroupsEntry 4 }
gs2326plusMLDSnoopingSSMTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMLDSnoopingSSMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MLD SFM (Source-Filtered Multicast) Information Table also contains
the SSM (Source-Specific Multicast) information. This table is sorted
first by VLAN ID, then by group, and then by Port. Different source
addresses belong to the same group are treated as single entry."
::= { gs2326plusMLDSnooping 6 }
gs2326plusMLDSnoopingSSMEntry OBJECT-TYPE
SYNTAX Gs2326plusMLDSnoopingSSMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMLDSnoopingSSMIndex }
::= { gs2326plusMLDSnoopingSSMTable 1 }
Gs2326plusMLDSnoopingSSMEntry ::= SEQUENCE {
gs2326plusMLDSnoopingSSMIndex Integer32,
gs2326plusMLDSnoopingSSMVLANID Integer32,
gs2326plusMLDSnoopingSSMGroup DisplayString,
gs2326plusMLDSnoopingSSMPort Integer32,
gs2326plusMLDSnoopingSSMMode DisplayString,
gs2326plusMLDSnoopingSSMSourceAddress DisplayString,
gs2326plusMLDSnoopingSSMType DisplayString
}
gs2326plusMLDSnoopingSSMIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MLD Snooping SSM Index"
::= { gs2326plusMLDSnoopingSSMEntry 1 }
gs2326plusMLDSnoopingSSMVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2326plusMLDSnoopingSSMEntry 2 }
gs2326plusMLDSnoopingSSMGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2326plusMLDSnoopingSSMEntry 3 }
gs2326plusMLDSnoopingSSMPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2326plusMLDSnoopingSSMEntry 4 }
gs2326plusMLDSnoopingSSMMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the filtering mode maintained per (VLAN ID, port number,
Group Address) basis. It can be either Include or Exclude."
::= { gs2326plusMLDSnoopingSSMEntry 5 }
gs2326plusMLDSnoopingSSMSourceAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of the source. Currently, system limits the total number of
IP source addresses for filtering to be 128."
::= { gs2326plusMLDSnoopingSSMEntry 6 }
gs2326plusMLDSnoopingSSMType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Type. It can be either Allow or Deny."
::= { gs2326plusMLDSnoopingSSMEntry 7 }
gs2326plusMVR OBJECT IDENTIFIER ::= { gs2326plusConfiguration 18 }
gs2326plusMVRConfiguration OBJECT IDENTIFIER ::= { gs2326plusMVR 1 }
gs2326plusMVRMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the Global MVR. "
::= { gs2326plusMVRConfiguration 1 }
gs2326plusMVRVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the Multicast VLAN ID. "
::= { gs2326plusMVRConfiguration 2 }
gs2326plusMVRPortConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMVRPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MVR Port Configuration. "
::= { gs2326plusMVRConfiguration 3 }
gs2326plusMVRPortConfigurationEntry OBJECT-TYPE
SYNTAX Gs2326plusMVRPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { gs2326plusMVRPortConfigurationTable 1 }
Gs2326plusMVRPortConfigurationEntry ::= SEQUENCE {
gs2326plusMVRPortConfigurationMode INTEGER,
gs2326plusMVRPortConfigurationType INTEGER,
gs2326plusMVRPortConfigurationImmediateLeave INTEGER
}
gs2326plusMVRPortConfigurationMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable MVR on the port. "
::= { gs2326plusMVRPortConfigurationEntry 1 }
gs2326plusMVRPortConfigurationType OBJECT-TYPE
SYNTAX INTEGER { receiver(0), source(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the MVR port type on the port. "
::= { gs2326plusMVRPortConfigurationEntry 2 }
gs2326plusMVRPortConfigurationImmediateLeave OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the fast leave on the port. "
::= { gs2326plusMVRPortConfigurationEntry 3 }
gs2326plusMVRPortGroupFiltering OBJECT IDENTIFIER ::= { gs2326plusMVR 2 }
gs2326plusMVRPortGroupFilteringCreate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only) 1 : Create MLD Snooping Port Group Filtering "
::= { gs2326plusMVRPortGroupFiltering 1 }
gs2326plusMVRPortGroupFilteringTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMVRPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Configure MVR port group filtering. "
::= { gs2326plusMVRPortGroupFiltering 2 }
gs2326plusMVRPortGroupFilteringEntry OBJECT-TYPE
SYNTAX Gs2326plusMVRPortGroupFilteringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMVRPortGroupFilteringIndex }
::= { gs2326plusMVRPortGroupFilteringTable 1 }
Gs2326plusMVRPortGroupFilteringEntry ::= SEQUENCE {
gs2326plusMVRPortGroupFilteringIndex Integer32,
gs2326plusMVRPortGroupFilteringPort Integer32,
gs2326plusMVRPortGroupFilteringStartGroups DisplayString,
gs2326plusMVRPortGroupFilteringEndGroups DisplayString,
gs2326plusMVRPortGroupFilteringRowStatus INTEGER
}
gs2326plusMVRPortGroupFilteringIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR Port Group Filtering Configuration Index. "
::= { gs2326plusMVRPortGroupFilteringEntry 1 }
gs2326plusMVRPortGroupFilteringPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logical port for the settings. "
::= { gs2326plusMVRPortGroupFilteringEntry 2 }
gs2326plusMVRPortGroupFilteringStartGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Multicast Group that will be allowed. "
::= { gs2326plusMVRPortGroupFilteringEntry 3 }
gs2326plusMVRPortGroupFilteringEndGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Multicast Group that will be allowed. "
::= { gs2326plusMVRPortGroupFilteringEntry 4 }
gs2326plusMVRPortGroupFilteringRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy"
::= { gs2326plusMVRPortGroupFilteringEntry 5 }
gs2326plusMVRGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMVRGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR Groups Information . "
::= { gs2326plusMVR 3 }
gs2326plusMVRGroupsEntry OBJECT-TYPE
SYNTAX Gs2326plusMVRGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMVRGroupsIndex }
::= { gs2326plusMVRGroupsTable 1 }
Gs2326plusMVRGroupsEntry ::= SEQUENCE {
gs2326plusMVRGroupsIndex Integer32,
gs2326plusMVRGroupsVLANID Integer32,
gs2326plusMVRGroups InetAddress,
gs2326plusMVRGroupsMemberships DisplayString
}
gs2326plusMVRGroupsIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR Groups Index"
::= { gs2326plusMVRGroupsEntry 1 }
gs2326plusMVRGroupsVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the group. "
::= { gs2326plusMVRGroupsEntry 2 }
gs2326plusMVRGroups OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group address of the group displayed."
::= { gs2326plusMVRGroupsEntry 3 }
gs2326plusMVRGroupsMemberships OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports under this group."
::= { gs2326plusMVRGroupsEntry 4 }
gs2326plusMVRStatus OBJECT IDENTIFIER ::= { gs2326plusMVR 4 }
gs2326plusMVRstatisticClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all Statistics counters."
::= { gs2326plusMVRStatus 1 }
gs2326plusMVRstatisticVLANID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the entry. "
::= { gs2326plusMVRStatus 2 }
gs2326plusMVRstatisticV1ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V1 Reports. "
::= { gs2326plusMVRStatus 3 }
gs2326plusMVRstatisticV2ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Reports. "
::= { gs2326plusMVRStatus 4 }
gs2326plusMVRstatisticV3ReportsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V3 Reports. "
::= { gs2326plusMVRStatus 5 }
gs2326plusMVRstatisticV2LeavesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Received V2 Leaves. "
::= { gs2326plusMVRStatus 6 }
gs2326plusLACP OBJECT IDENTIFIER ::= { gs2326plusConfiguration 19 }
gs2326plusLACPConf OBJECT IDENTIFIER ::= { gs2326plusLACP 1 }
gs2326plusLACPPortConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusLACPPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusLACPConf 1 }
gs2326plusLACPPortConfigurationEntry OBJECT-TYPE
SYNTAX Gs2326plusLACPPortConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusLACPPortConfigurationPort }
::= { gs2326plusLACPPortConfigurationTable 1 }
Gs2326plusLACPPortConfigurationEntry ::= SEQUENCE {
gs2326plusLACPPortConfigurationPort Integer32,
gs2326plusLACPPortConfigurationMode INTEGER,
gs2326plusLACPPortConfigurationKey Integer32,
gs2326plusLACPPortConfigurationRole INTEGER
}
gs2326plusLACPPortConfigurationPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusLACPPortConfigurationEntry 1 }
gs2326plusLACPPortConfigurationMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable LACP Mode."
::= { gs2326plusLACPPortConfigurationEntry 2 }
gs2326plusLACPPortConfigurationKey OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LACP key : 1-65535. 0 : Auto"
::= { gs2326plusLACPPortConfigurationEntry 3 }
gs2326plusLACPPortConfigurationRole OBJECT-TYPE
SYNTAX INTEGER { passive(0), active(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 : passive, Listen for LACP packets.
1 : active, Initiate LACP negotiation, and transmit LACP packets each second"
::= { gs2326plusLACPPortConfigurationEntry 4 }
gs2326plusLACPSystemStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusLACPSystemStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusLACP 2 }
gs2326plusLACPSystemStatusEntry OBJECT-TYPE
SYNTAX Gs2326plusLACPSystemStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusLACPSystemStatusIndex }
::= { gs2326plusLACPSystemStatusTable 1 }
Gs2326plusLACPSystemStatusEntry ::= SEQUENCE {
gs2326plusLACPSystemStatusIndex Integer32,
gs2326plusLACPSystemStatusAggrID DisplayString,
gs2326plusLACPSystemStatusPartnerSystemID MacAddress,
gs2326plusLACPSystemStatusPartnerKey DisplayString,
gs2326plusLACPSystemStatusLastchanged DisplayString,
gs2326plusLACPSystemStatusLocalPorts DisplayString
}
gs2326plusLACPSystemStatusIndex OBJECT-TYPE
SYNTAX Integer32(1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusLACPSystemStatusEntry 1 }
gs2326plusLACPSystemStatusAggrID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Aggregation ID associated with this aggregation instance."
::= { gs2326plusLACPSystemStatusEntry 2 }
gs2326plusLACPSystemStatusPartnerSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system ID (MAC address) of the aggregation partner."
::= { gs2326plusLACPSystemStatusEntry 3 }
gs2326plusLACPSystemStatusPartnerKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Key that the partner has assigned to this aggregation ID. "
::= { gs2326plusLACPSystemStatusEntry 4 }
gs2326plusLACPSystemStatusLastchanged OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The time since this aggregation changed. "
::= { gs2326plusLACPSystemStatusEntry 5 }
gs2326plusLACPSystemStatusLocalPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows which ports are a part of this aggregation for this switch. "
::= { gs2326plusLACPSystemStatusEntry 6 }
gs2326plusLACPStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusLACPStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusLACP 3 }
gs2326plusLACPStatusEntry OBJECT-TYPE
SYNTAX Gs2326plusLACPStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusLACPStatusPort }
::= { gs2326plusLACPStatusTable 1 }
Gs2326plusLACPStatusEntry ::= SEQUENCE {
gs2326plusLACPStatusPort Integer32,
gs2326plusLACPStatusLACP DisplayString,
gs2326plusLACPStatusKey DisplayString,
gs2326plusLACPStatusAggrID DisplayString,
gs2326plusLACPStatusPartnerSystemID DisplayString,
gs2326plusLACPStatusPartnerPort DisplayString
}
gs2326plusLACPStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusLACPStatusEntry 1 }
gs2326plusLACPStatusLACP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enabled means that LACP is enabled and the port link is up.
Disabled means that LACP is not enabled or that the port link is down.
Backup means that the port could not join the aggregation group but will join if other port leaves.
Meanwhile it's LACP status is disabled."
::= { gs2326plusLACPStatusEntry 2 }
gs2326plusLACPStatusKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The key assigned to this port. Only ports with the same key can aggregate together."
::= { gs2326plusLACPStatusEntry 3 }
gs2326plusLACPStatusAggrID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Aggregation ID assigned to this aggregation group. "
::= { gs2326plusLACPStatusEntry 4 }
gs2326plusLACPStatusPartnerSystemID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The partner's System ID. "
::= { gs2326plusLACPStatusEntry 5 }
gs2326plusLACPStatusPartnerPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The partner's port number connected to this port. "
::= { gs2326plusLACPStatusEntry 6 }
gs2326plusLACPStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusLACPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusLACP 4 }
gs2326plusLACPStatisticsEntry OBJECT-TYPE
SYNTAX Gs2326plusLACPStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusLACPStatisticsPort }
::= { gs2326plusLACPStatisticsTable 1 }
Gs2326plusLACPStatisticsEntry ::= SEQUENCE {
gs2326plusLACPStatisticsPort Integer32,
gs2326plusLACPReceived Counter32,
gs2326plusLACPTransmitted Counter32,
gs2326plusLACPDiscardedUnknown Counter32,
gs2326plusLACPDiscardedIllegal Counter32
}
gs2326plusLACPStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusLACPStatisticsEntry 1 }
gs2326plusLACPReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows how many LACP frames have been received at each port. "
::= { gs2326plusLACPStatisticsEntry 2 }
gs2326plusLACPTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows how many LACP frames have been sent from each port. "
::= { gs2326plusLACPStatisticsEntry 3 }
gs2326plusLACPDiscardedUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows how many unknown LACP frames have been discarded at each port. "
::= { gs2326plusLACPStatisticsEntry 4 }
gs2326plusLACPDiscardedIllegal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows how many illegal LACP frames have been discarded at each port. "
::= { gs2326plusLACPStatisticsEntry 5 }
gs2326plusLACPStatisticsClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: clear"
::= { gs2326plusLACP 5 }
gs2326plusSTP OBJECT IDENTIFIER ::= { gs2326plusConfiguration 20 }
gs2326plusSTPBridgeBasicConf OBJECT IDENTIFIER ::= { gs2326plusSTP 1 }
gs2326plusSTPBridgeProtocolVersion OBJECT-TYPE
SYNTAX INTEGER { stp(0), rstp(2), mstp(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 3,
0: stp
2: rstp
3: mstp"
::= { gs2326plusSTPBridgeBasicConf 1 }
gs2326plusSTPBridgePriority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP bridge priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2326plusSTPBridgeBasicConf 2 }
gs2326plusSTPBridgeForwardDelay OBJECT-TYPE
SYNTAX Integer32(4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Forward Delay default: 15, range: 4 - 30.
MaxAge must be <= (FwdDelay-1)*2."
::= { gs2326plusSTPBridgeBasicConf 3 }
gs2326plusSTPBridgeMaxAge OBJECT-TYPE
SYNTAX Integer32(6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Max Age default: 20, range: 6 - 40.
MaxAge must be <= (FwdDelay-1)*2"
::= { gs2326plusSTPBridgeBasicConf 4 }
gs2326plusSTPBridgeMaximumHopCount OBJECT-TYPE
SYNTAX Integer32(6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Maximum Hop Count default: 20, range: 6 - 40."
::= { gs2326plusSTPBridgeBasicConf 5 }
gs2326plusSTPBridgeTransmitHoldCount OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Transmit Hold Count default: 6, range: 1 - 10."
::= { gs2326plusSTPBridgeBasicConf 6 }
gs2326plusSTPBridgeAdvancedConf OBJECT IDENTIFIER ::= { gs2326plusSTP 2 }
gs2326plusSTPBridgeEdgePortBPDUFiltering OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPBridgeAdvancedConf 1 }
gs2326plusSTPBridgeEdgePortBPDUGuard OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPBridgeAdvancedConf 2 }
gs2326plusSTPBridgePortErrorRecoveryTimeout OBJECT-TYPE
SYNTAX Integer32(0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port Error Recovery Timeout disable: 0, range: 30 - 86400."
::= { gs2326plusSTPBridgeAdvancedConf 3 }
gs2326plusSTPMSTIConf OBJECT IDENTIFIER ::= { gs2326plusSTP 3 }
gs2326plusSTPMSTIConfigurationName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A text string up to 32 characters long."
::= { gs2326plusSTPMSTIConf 1 }
gs2326plusSTPMSTIConfigurationRevision OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configuration Revision default: 0, range: 0 - 65535."
::= { gs2326plusSTPMSTIConf 2 }
gs2326plusSTPMSTIMappingConf OBJECT IDENTIFIER ::= { gs2326plusSTP 4 }
gs2326plusSTPMSTI1VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI1.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2326plusSTPMSTIMappingConf 1 }
gs2326plusSTPMSTI2VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI2.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2326plusSTPMSTIMappingConf 2 }
gs2326plusSTPMSTI3VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI3.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2326plusSTPMSTIMappingConf 3 }
gs2326plusSTPMSTI4VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI4.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2326plusSTPMSTIMappingConf 4 }
gs2326plusSTPMSTI5VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI5.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2326plusSTPMSTIMappingConf 5 }
gs2326plusSTPMSTI6VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI6.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2326plusSTPMSTIMappingConf 6 }
gs2326plusSTPMSTI7VLANsMapped OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VLANs mapped to the MSTI7.
The VLANs must be separated with comma or space.
An unused MSTI should just be left empty. "
::= { gs2326plusSTPMSTIMappingConf 7 }
gs2326plusSTPMSTIPriority OBJECT IDENTIFIER ::= { gs2326plusSTP 5 }
gs2326plusSTPCISTPriority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2326plusSTPMSTIPriority 1 }
gs2326plusSTPMSTI1Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2326plusSTPMSTIPriority 2 }
gs2326plusSTPMSTI2Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2326plusSTPMSTIPriority 3 }
gs2326plusSTPMSTI3Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2326plusSTPMSTIPriority 4 }
gs2326plusSTPMSTI4Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2326plusSTPMSTIPriority 5 }
gs2326plusSTPMSTI5Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2326plusSTPMSTIPriority 6 }
gs2326plusSTPMSTI6Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2326plusSTPMSTIPriority 7 }
gs2326plusSTPMSTI7Priority OBJECT-TYPE
SYNTAX Integer32(0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 32768,
STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)"
::= { gs2326plusSTPMSTIPriority 8 }
gs2326plusSTPCISTPort OBJECT IDENTIFIER ::= { gs2326plusSTP 6 }
gs2326plusSTPCISTAggregatedPort OBJECT IDENTIFIER ::= { gs2326plusSTPCISTPort 1 }
gs2326plusSTPCISTAggregatedPortSTPEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPCISTAggregatedPort 1 }
gs2326plusSTPCISTAggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPCISTAggregatedPort 2 }
gs2326plusSTPCISTAggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPCISTAggregatedPort 3 }
gs2326plusSTPCISTAggregatedPortAdminEdge OBJECT-TYPE
SYNTAX INTEGER { non-edge(0), edge(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: non-edge
1: edge"
::= { gs2326plusSTPCISTAggregatedPort 4 }
gs2326plusSTPCISTAggregatedPortAutoEdge OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 1,
0: disable
1: enable"
::= { gs2326plusSTPCISTAggregatedPort 5 }
gs2326plusSTPCISTAggregatedPortRestrictedRole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPCISTAggregatedPort 6 }
gs2326plusSTPCISTAggregatedPortRestrictedTCN OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPCISTAggregatedPort 7 }
gs2326plusSTPCISTAggregatedPortBPDUGuard OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPCISTAggregatedPort 8 }
gs2326plusSTPCISTAggregatedPortPointtoPoint OBJECT-TYPE
SYNTAX INTEGER { forcetrue(0), forcefalse(1), auto(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: Forced True
1: Forced False
2: Auto"
::= { gs2326plusSTPCISTAggregatedPort 9 }
gs2326plusSTPCISTNormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPCISTNormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show CIST Normal Port Configurations. "
::= { gs2326plusSTPCISTPort 2 }
gs2326plusSTPCISTNormalPortEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPCISTNormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPCISTNormalPortConfPort }
::= { gs2326plusSTPCISTNormalPortTable 1 }
Gs2326plusSTPCISTNormalPortEntry ::= SEQUENCE {
gs2326plusSTPCISTNormalPortConfPort Integer32,
gs2326plusSTPCISTNormalPortSTPEnabled INTEGER,
gs2326plusSTPCISTNormalPortPathCost Integer32,
gs2326plusSTPCISTNormalPortPriority Integer32,
gs2326plusSTPCISTNormalPortAdminEdge INTEGER,
gs2326plusSTPCISTNormalPortAutoEdge INTEGER,
gs2326plusSTPCISTNormalPortRestrictedRole INTEGER,
gs2326plusSTPCISTNormalPortRestrictedTCN INTEGER,
gs2326plusSTPCISTNormalPortBPDUGuard INTEGER,
gs2326plusSTPCISTNormalPortPointtoPoint INTEGER
}
gs2326plusSTPCISTNormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPCISTNormalPortEntry 1 }
gs2326plusSTPCISTNormalPortSTPEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPCISTNormalPortEntry 2 }
gs2326plusSTPCISTNormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPCISTNormalPortEntry 3 }
gs2326plusSTPCISTNormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPCISTNormalPortEntry 4 }
gs2326plusSTPCISTNormalPortAdminEdge OBJECT-TYPE
SYNTAX INTEGER { non-edge(0), edge(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: non-edge
1: edge"
::= { gs2326plusSTPCISTNormalPortEntry 5 }
gs2326plusSTPCISTNormalPortAutoEdge OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 1,
0: disable
1: enable"
::= { gs2326plusSTPCISTNormalPortEntry 6 }
gs2326plusSTPCISTNormalPortRestrictedRole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPCISTNormalPortEntry 7 }
gs2326plusSTPCISTNormalPortRestrictedTCN OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPCISTNormalPortEntry 8 }
gs2326plusSTPCISTNormalPortBPDUGuard OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0,
0: disable
1: enable"
::= { gs2326plusSTPCISTNormalPortEntry 9 }
gs2326plusSTPCISTNormalPortPointtoPoint OBJECT-TYPE
SYNTAX INTEGER { forcetrue(0), forcefalse(1), auto(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 2,
0: Forced True
1: Forced False
2: Auto"
::= { gs2326plusSTPCISTNormalPortEntry 10 }
gs2326plusSTPMSTIPort OBJECT IDENTIFIER ::= { gs2326plusSTP 7 }
gs2326plusSTPMSTI1Port OBJECT IDENTIFIER ::= { gs2326plusSTPMSTIPort 1 }
gs2326plusSTPMSTI1AggregatedPort OBJECT IDENTIFIER ::= { gs2326plusSTPMSTI1Port 1 }
gs2326plusSTPMSTI1AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI1AggregatedPort 1 }
gs2326plusSTPMSTI1AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI1AggregatedPort 2 }
gs2326plusSTPMSTI1NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPMSTI1NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI1 Normal Port Configurations. "
::= { gs2326plusSTPMSTI1Port 2 }
gs2326plusSTPMSTI1NormalPortEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPMSTI1NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPMSTI1NormalPortConfPort }
::= { gs2326plusSTPMSTI1NormalPortTable 1 }
Gs2326plusSTPMSTI1NormalPortEntry ::= SEQUENCE {
gs2326plusSTPMSTI1NormalPortConfPort Integer32,
gs2326plusSTPMSTI1NormalPortPathCost Integer32,
gs2326plusSTPMSTI1NormalPortPriority Integer32
}
gs2326plusSTPMSTI1NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPMSTI1NormalPortEntry 1 }
gs2326plusSTPMSTI1NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI1NormalPortEntry 2 }
gs2326plusSTPMSTI1NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI1NormalPortEntry 3 }
gs2326plusSTPMSTI2Port OBJECT IDENTIFIER ::= { gs2326plusSTPMSTIPort 2 }
gs2326plusSTPMSTI2AggregatedPort OBJECT IDENTIFIER ::= { gs2326plusSTPMSTI2Port 1 }
gs2326plusSTPMSTI2AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI2AggregatedPort 1 }
gs2326plusSTPMSTI2AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI2AggregatedPort 2 }
gs2326plusSTPMSTI2NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPMSTI2NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI2 Normal Port Configurations. "
::= { gs2326plusSTPMSTI2Port 2 }
gs2326plusSTPMSTI2NormalPortEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPMSTI2NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPMSTI2NormalPortConfPort }
::= { gs2326plusSTPMSTI2NormalPortTable 1 }
Gs2326plusSTPMSTI2NormalPortEntry ::= SEQUENCE {
gs2326plusSTPMSTI2NormalPortConfPort Integer32,
gs2326plusSTPMSTI2NormalPortPathCost Integer32,
gs2326plusSTPMSTI2NormalPortPriority Integer32
}
gs2326plusSTPMSTI2NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPMSTI2NormalPortEntry 1 }
gs2326plusSTPMSTI2NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI2NormalPortEntry 2 }
gs2326plusSTPMSTI2NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI2NormalPortEntry 3 }
gs2326plusSTPMSTI3Port OBJECT IDENTIFIER ::= { gs2326plusSTPMSTIPort 3 }
gs2326plusSTPMSTI3AggregatedPort OBJECT IDENTIFIER ::= { gs2326plusSTPMSTI3Port 1 }
gs2326plusSTPMSTI3AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI3AggregatedPort 1 }
gs2326plusSTPMSTI3AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI3AggregatedPort 2 }
gs2326plusSTPMSTI3NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPMSTI3NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI3 Normal Port Configurations. "
::= { gs2326plusSTPMSTI3Port 2 }
gs2326plusSTPMSTI3NormalPortEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPMSTI3NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPMSTI3NormalPortConfPort }
::= { gs2326plusSTPMSTI3NormalPortTable 1 }
Gs2326plusSTPMSTI3NormalPortEntry ::= SEQUENCE {
gs2326plusSTPMSTI3NormalPortConfPort Integer32,
gs2326plusSTPMSTI3NormalPortPathCost Integer32,
gs2326plusSTPMSTI3NormalPortPriority Integer32
}
gs2326plusSTPMSTI3NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPMSTI3NormalPortEntry 1 }
gs2326plusSTPMSTI3NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI3NormalPortEntry 2 }
gs2326plusSTPMSTI3NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI3NormalPortEntry 3 }
gs2326plusSTPMSTI4Port OBJECT IDENTIFIER ::= { gs2326plusSTPMSTIPort 4 }
gs2326plusSTPMSTI4AggregatedPort OBJECT IDENTIFIER ::= { gs2326plusSTPMSTI4Port 1 }
gs2326plusSTPMSTI4AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI4AggregatedPort 1 }
gs2326plusSTPMSTI4AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI4AggregatedPort 2 }
gs2326plusSTPMSTI4NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPMSTI4NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI4 Normal Port Configurations. "
::= { gs2326plusSTPMSTI4Port 2 }
gs2326plusSTPMSTI4NormalPortEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPMSTI4NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPMSTI4NormalPortConfPort }
::= { gs2326plusSTPMSTI4NormalPortTable 1 }
Gs2326plusSTPMSTI4NormalPortEntry ::= SEQUENCE {
gs2326plusSTPMSTI4NormalPortConfPort Integer32,
gs2326plusSTPMSTI4NormalPortPathCost Integer32,
gs2326plusSTPMSTI4NormalPortPriority Integer32
}
gs2326plusSTPMSTI4NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPMSTI4NormalPortEntry 1 }
gs2326plusSTPMSTI4NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI4NormalPortEntry 2 }
gs2326plusSTPMSTI4NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI4NormalPortEntry 3 }
gs2326plusSTPMSTI5Port OBJECT IDENTIFIER ::= { gs2326plusSTPMSTIPort 5 }
gs2326plusSTPMSTI5AggregatedPort OBJECT IDENTIFIER ::= { gs2326plusSTPMSTI5Port 1 }
gs2326plusSTPMSTI5AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI5AggregatedPort 1 }
gs2326plusSTPMSTI5AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI5AggregatedPort 2 }
gs2326plusSTPMSTI5NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPMSTI5NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI5 Normal Port Configurations. "
::= { gs2326plusSTPMSTI5Port 2 }
gs2326plusSTPMSTI5NormalPortEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPMSTI5NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPMSTI5NormalPortConfPort }
::= { gs2326plusSTPMSTI5NormalPortTable 1 }
Gs2326plusSTPMSTI5NormalPortEntry ::= SEQUENCE {
gs2326plusSTPMSTI5NormalPortConfPort Integer32,
gs2326plusSTPMSTI5NormalPortPathCost Integer32,
gs2326plusSTPMSTI5NormalPortPriority Integer32
}
gs2326plusSTPMSTI5NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPMSTI5NormalPortEntry 1 }
gs2326plusSTPMSTI5NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI5NormalPortEntry 2 }
gs2326plusSTPMSTI5NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI5NormalPortEntry 3 }
gs2326plusSTPMSTI6Port OBJECT IDENTIFIER ::= { gs2326plusSTPMSTIPort 6 }
gs2326plusSTPMSTI6AggregatedPort OBJECT IDENTIFIER ::= { gs2326plusSTPMSTI6Port 1 }
gs2326plusSTPMSTI6AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI6AggregatedPort 1 }
gs2326plusSTPMSTI6AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI6AggregatedPort 2 }
gs2326plusSTPMSTI6NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPMSTI6NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI6 Normal Port Configurations. "
::= { gs2326plusSTPMSTI6Port 2 }
gs2326plusSTPMSTI6NormalPortEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPMSTI6NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPMSTI6NormalPortConfPort }
::= { gs2326plusSTPMSTI6NormalPortTable 1 }
Gs2326plusSTPMSTI6NormalPortEntry ::= SEQUENCE {
gs2326plusSTPMSTI6NormalPortConfPort Integer32,
gs2326plusSTPMSTI6NormalPortPathCost Integer32,
gs2326plusSTPMSTI6NormalPortPriority Integer32
}
gs2326plusSTPMSTI6NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPMSTI6NormalPortEntry 1 }
gs2326plusSTPMSTI6NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI6NormalPortEntry 2 }
gs2326plusSTPMSTI6NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI6NormalPortEntry 3 }
gs2326plusSTPMSTI7Port OBJECT IDENTIFIER ::= { gs2326plusSTPMSTIPort 7 }
gs2326plusSTPMSTI7AggregatedPort OBJECT IDENTIFIER ::= { gs2326plusSTPMSTI7Port 1 }
gs2326plusSTPMSTI7AggregatedPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI7AggregatedPort 1 }
gs2326plusSTPMSTI7AggregatedPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI7AggregatedPort 2 }
gs2326plusSTPMSTI7NormalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPMSTI7NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI7 Normal Port Configurations. "
::= { gs2326plusSTPMSTI7Port 2 }
gs2326plusSTPMSTI7NormalPortEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPMSTI7NormalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPMSTI7NormalPortConfPort }
::= { gs2326plusSTPMSTI7NormalPortTable 1 }
Gs2326plusSTPMSTI7NormalPortEntry ::= SEQUENCE {
gs2326plusSTPMSTI7NormalPortConfPort Integer32,
gs2326plusSTPMSTI7NormalPortPathCost Integer32,
gs2326plusSTPMSTI7NormalPortPriority Integer32
}
gs2326plusSTPMSTI7NormalPortConfPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPMSTI7NormalPortEntry 1 }
gs2326plusSTPMSTI7NormalPortPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Auto: 0,
Specific Path Cost range: 1 - 200000000."
::= { gs2326plusSTPMSTI7NormalPortEntry 2 }
gs2326plusSTPMSTI7NormalPortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 128,
Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)"
::= { gs2326plusSTPMSTI7NormalPortEntry 3 }
gs2326plusSTPBridgeStatus OBJECT IDENTIFIER ::= { gs2326plusSTP 8 }
gs2326plusCISTBridgeSTP OBJECT IDENTIFIER ::= { gs2326plusSTPBridgeStatus 1 }
gs2326plusCISTBridgeSTPStatus OBJECT IDENTIFIER ::= { gs2326plusCISTBridgeSTP 1 }
gs2326plusCISTBridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2326plusCISTBridgeSTPStatus 1 }
gs2326plusCISTBridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2326plusCISTBridgeSTPStatus 2 }
gs2326plusCISTRootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2326plusCISTBridgeSTPStatus 3 }
gs2326plusCISTRootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2326plusCISTBridgeSTPStatus 4 }
gs2326plusCISTRootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2326plusCISTBridgeSTPStatus 5 }
gs2326plusCISTRegionalRoot OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected regional root bridge, inside the MSTP region of this bridge."
::= { gs2326plusCISTBridgeSTPStatus 6 }
gs2326plusCISTInternalRootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Regional Root Path Cost."
::= { gs2326plusCISTBridgeSTPStatus 7 }
gs2326plusCISTTopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2326plusCISTBridgeSTPStatus 8 }
gs2326plusCISTTopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2326plusCISTBridgeSTPStatus 9 }
gs2326plusCISTTopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2326plusCISTBridgeSTPStatus 10 }
gs2326plusCISTPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusCISTPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show CIST Ports and Aggregations State Configurations. "
::= { gs2326plusCISTBridgeSTP 2 }
gs2326plusCISTPortStateEntry OBJECT-TYPE
SYNTAX Gs2326plusCISTPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusCISTPortStateIndex }
::= { gs2326plusCISTPortStateTable 1 }
Gs2326plusCISTPortStateEntry ::= SEQUENCE {
gs2326plusCISTPortStateIndex Integer32,
gs2326plusCISTPortStatePort DisplayString,
gs2326plusCISTPortStatePortID DisplayString,
gs2326plusCISTPortStateRole DisplayString,
gs2326plusCISTPortStateState DisplayString,
gs2326plusCISTPortStatePathCost Integer32,
gs2326plusCISTPortStateEdge DisplayString,
gs2326plusCISTPortStatePoint2Point DisplayString,
gs2326plusCISTPortStateUptime DisplayString
}
gs2326plusCISTPortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2326plusCISTPortStateEntry 1 }
gs2326plusCISTPortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2326plusCISTPortStateEntry 2 }
gs2326plusCISTPortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2326plusCISTPortStateEntry 3 }
gs2326plusCISTPortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2326plusCISTPortStateEntry 4 }
gs2326plusCISTPortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2326plusCISTPortStateEntry 5 }
gs2326plusCISTPortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2326plusCISTPortStateEntry 6 }
gs2326plusCISTPortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2326plusCISTPortStateEntry 7 }
gs2326plusCISTPortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2326plusCISTPortStateEntry 8 }
gs2326plusCISTPortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2326plusCISTPortStateEntry 9 }
gs2326plusMSTI1BridgeSTP OBJECT IDENTIFIER ::= { gs2326plusSTPBridgeStatus 2 }
gs2326plusMSTI1BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2326plusMSTI1BridgeSTP 1 }
gs2326plusMSTI1BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2326plusMSTI1BridgeSTPStatus 1 }
gs2326plusMSTI1BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2326plusMSTI1BridgeSTPStatus 2 }
gs2326plusMSTI1RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2326plusMSTI1BridgeSTPStatus 3 }
gs2326plusMSTI1RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2326plusMSTI1BridgeSTPStatus 4 }
gs2326plusMSTI1RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2326plusMSTI1BridgeSTPStatus 5 }
gs2326plusMSTI1TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2326plusMSTI1BridgeSTPStatus 8 }
gs2326plusMSTI1TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2326plusMSTI1BridgeSTPStatus 9 }
gs2326plusMSTI1TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2326plusMSTI1BridgeSTPStatus 10 }
gs2326plusMSTI1PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMSTI1PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI1 Ports and Aggregations State Configurations. "
::= { gs2326plusMSTI1BridgeSTP 2 }
gs2326plusMSTI1PortStateEntry OBJECT-TYPE
SYNTAX Gs2326plusMSTI1PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMSTI1PortStateIndex }
::= { gs2326plusMSTI1PortStateTable 1 }
Gs2326plusMSTI1PortStateEntry ::= SEQUENCE {
gs2326plusMSTI1PortStateIndex Integer32,
gs2326plusMSTI1PortStatePort DisplayString,
gs2326plusMSTI1PortStatePortID DisplayString,
gs2326plusMSTI1PortStateRole DisplayString,
gs2326plusMSTI1PortStateState DisplayString,
gs2326plusMSTI1PortStatePathCost Integer32,
gs2326plusMSTI1PortStateEdge DisplayString,
gs2326plusMSTI1PortStatePoint2Point DisplayString,
gs2326plusMSTI1PortStateUptime DisplayString
}
gs2326plusMSTI1PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2326plusMSTI1PortStateEntry 1 }
gs2326plusMSTI1PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2326plusMSTI1PortStateEntry 2 }
gs2326plusMSTI1PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2326plusMSTI1PortStateEntry 3 }
gs2326plusMSTI1PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2326plusMSTI1PortStateEntry 4 }
gs2326plusMSTI1PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2326plusMSTI1PortStateEntry 5 }
gs2326plusMSTI1PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2326plusMSTI1PortStateEntry 6 }
gs2326plusMSTI1PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2326plusMSTI1PortStateEntry 7 }
gs2326plusMSTI1PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2326plusMSTI1PortStateEntry 8 }
gs2326plusMSTI1PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2326plusMSTI1PortStateEntry 9 }
gs2326plusMSTI2BridgeSTP OBJECT IDENTIFIER ::= { gs2326plusSTPBridgeStatus 3 }
gs2326plusMSTI2BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2326plusMSTI2BridgeSTP 1 }
gs2326plusMSTI2BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2326plusMSTI2BridgeSTPStatus 1 }
gs2326plusMSTI2BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2326plusMSTI2BridgeSTPStatus 2 }
gs2326plusMSTI2RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2326plusMSTI2BridgeSTPStatus 3 }
gs2326plusMSTI2RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2326plusMSTI2BridgeSTPStatus 4 }
gs2326plusMSTI2RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2326plusMSTI2BridgeSTPStatus 5 }
gs2326plusMSTI2TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2326plusMSTI2BridgeSTPStatus 8 }
gs2326plusMSTI2TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2326plusMSTI2BridgeSTPStatus 9 }
gs2326plusMSTI2TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2326plusMSTI2BridgeSTPStatus 10 }
gs2326plusMSTI2PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMSTI2PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI2 Ports and Aggregations State Configurations. "
::= { gs2326plusMSTI2BridgeSTP 2 }
gs2326plusMSTI2PortStateEntry OBJECT-TYPE
SYNTAX Gs2326plusMSTI2PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMSTI2PortStateIndex }
::= { gs2326plusMSTI2PortStateTable 1 }
Gs2326plusMSTI2PortStateEntry ::= SEQUENCE {
gs2326plusMSTI2PortStateIndex Integer32,
gs2326plusMSTI2PortStatePort DisplayString,
gs2326plusMSTI2PortStatePortID DisplayString,
gs2326plusMSTI2PortStateRole DisplayString,
gs2326plusMSTI2PortStateState DisplayString,
gs2326plusMSTI2PortStatePathCost Integer32,
gs2326plusMSTI2PortStateEdge DisplayString,
gs2326plusMSTI2PortStatePoint2Point DisplayString,
gs2326plusMSTI2PortStateUptime DisplayString
}
gs2326plusMSTI2PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2326plusMSTI2PortStateEntry 1 }
gs2326plusMSTI2PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2326plusMSTI2PortStateEntry 2 }
gs2326plusMSTI2PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2326plusMSTI2PortStateEntry 3 }
gs2326plusMSTI2PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2326plusMSTI2PortStateEntry 4 }
gs2326plusMSTI2PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2326plusMSTI2PortStateEntry 5 }
gs2326plusMSTI2PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2326plusMSTI2PortStateEntry 6 }
gs2326plusMSTI2PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2326plusMSTI2PortStateEntry 7 }
gs2326plusMSTI2PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2326plusMSTI2PortStateEntry 8 }
gs2326plusMSTI2PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2326plusMSTI2PortStateEntry 9 }
gs2326plusMSTI3BridgeSTP OBJECT IDENTIFIER ::= { gs2326plusSTPBridgeStatus 4 }
gs2326plusMSTI3BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2326plusMSTI3BridgeSTP 1 }
gs2326plusMSTI3BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2326plusMSTI3BridgeSTPStatus 1 }
gs2326plusMSTI3BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2326plusMSTI3BridgeSTPStatus 2 }
gs2326plusMSTI3RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2326plusMSTI3BridgeSTPStatus 3 }
gs2326plusMSTI3RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2326plusMSTI3BridgeSTPStatus 4 }
gs2326plusMSTI3RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2326plusMSTI3BridgeSTPStatus 5 }
gs2326plusMSTI3TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2326plusMSTI3BridgeSTPStatus 8 }
gs2326plusMSTI3TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2326plusMSTI3BridgeSTPStatus 9 }
gs2326plusMSTI3TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2326plusMSTI3BridgeSTPStatus 10 }
gs2326plusMSTI3PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMSTI3PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI3 Ports and Aggregations State Configurations. "
::= { gs2326plusMSTI3BridgeSTP 2 }
gs2326plusMSTI3PortStateEntry OBJECT-TYPE
SYNTAX Gs2326plusMSTI3PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMSTI3PortStateIndex }
::= { gs2326plusMSTI3PortStateTable 1 }
Gs2326plusMSTI3PortStateEntry ::= SEQUENCE {
gs2326plusMSTI3PortStateIndex Integer32,
gs2326plusMSTI3PortStatePort DisplayString,
gs2326plusMSTI3PortStatePortID DisplayString,
gs2326plusMSTI3PortStateRole DisplayString,
gs2326plusMSTI3PortStateState DisplayString,
gs2326plusMSTI3PortStatePathCost Integer32,
gs2326plusMSTI3PortStateEdge DisplayString,
gs2326plusMSTI3PortStatePoint2Point DisplayString,
gs2326plusMSTI3PortStateUptime DisplayString
}
gs2326plusMSTI3PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2326plusMSTI3PortStateEntry 1 }
gs2326plusMSTI3PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2326plusMSTI3PortStateEntry 2 }
gs2326plusMSTI3PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2326plusMSTI3PortStateEntry 3 }
gs2326plusMSTI3PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2326plusMSTI3PortStateEntry 4 }
gs2326plusMSTI3PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2326plusMSTI3PortStateEntry 5 }
gs2326plusMSTI3PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2326plusMSTI3PortStateEntry 6 }
gs2326plusMSTI3PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2326plusMSTI3PortStateEntry 7 }
gs2326plusMSTI3PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2326plusMSTI3PortStateEntry 8 }
gs2326plusMSTI3PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2326plusMSTI3PortStateEntry 9 }
gs2326plusMSTI4BridgeSTP OBJECT IDENTIFIER ::= { gs2326plusSTPBridgeStatus 5 }
gs2326plusMSTI4BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2326plusMSTI4BridgeSTP 1 }
gs2326plusMSTI4BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2326plusMSTI4BridgeSTPStatus 1 }
gs2326plusMSTI4BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2326plusMSTI4BridgeSTPStatus 2 }
gs2326plusMSTI4RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2326plusMSTI4BridgeSTPStatus 3 }
gs2326plusMSTI4RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2326plusMSTI4BridgeSTPStatus 4 }
gs2326plusMSTI4RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2326plusMSTI4BridgeSTPStatus 5 }
gs2326plusMSTI4TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2326plusMSTI4BridgeSTPStatus 8 }
gs2326plusMSTI4TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2326plusMSTI4BridgeSTPStatus 9 }
gs2326plusMSTI4TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2326plusMSTI4BridgeSTPStatus 10 }
gs2326plusMSTI4PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMSTI4PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI4 Ports and Aggregations State Configurations. "
::= { gs2326plusMSTI4BridgeSTP 2 }
gs2326plusMSTI4PortStateEntry OBJECT-TYPE
SYNTAX Gs2326plusMSTI4PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMSTI4PortStateIndex }
::= { gs2326plusMSTI4PortStateTable 1 }
Gs2326plusMSTI4PortStateEntry ::= SEQUENCE {
gs2326plusMSTI4PortStateIndex Integer32,
gs2326plusMSTI4PortStatePort DisplayString,
gs2326plusMSTI4PortStatePortID DisplayString,
gs2326plusMSTI4PortStateRole DisplayString,
gs2326plusMSTI4PortStateState DisplayString,
gs2326plusMSTI4PortStatePathCost Integer32,
gs2326plusMSTI4PortStateEdge DisplayString,
gs2326plusMSTI4PortStatePoint2Point DisplayString,
gs2326plusMSTI4PortStateUptime DisplayString
}
gs2326plusMSTI4PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2326plusMSTI4PortStateEntry 1 }
gs2326plusMSTI4PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2326plusMSTI4PortStateEntry 2 }
gs2326plusMSTI4PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2326plusMSTI4PortStateEntry 3 }
gs2326plusMSTI4PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2326plusMSTI4PortStateEntry 4 }
gs2326plusMSTI4PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2326plusMSTI4PortStateEntry 5 }
gs2326plusMSTI4PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2326plusMSTI4PortStateEntry 6 }
gs2326plusMSTI4PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2326plusMSTI4PortStateEntry 7 }
gs2326plusMSTI4PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2326plusMSTI4PortStateEntry 8 }
gs2326plusMSTI4PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2326plusMSTI4PortStateEntry 9 }
gs2326plusMSTI5BridgeSTP OBJECT IDENTIFIER ::= { gs2326plusSTPBridgeStatus 6 }
gs2326plusMSTI5BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2326plusMSTI5BridgeSTP 1 }
gs2326plusMSTI5BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2326plusMSTI5BridgeSTPStatus 1 }
gs2326plusMSTI5BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2326plusMSTI5BridgeSTPStatus 2 }
gs2326plusMSTI5RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2326plusMSTI5BridgeSTPStatus 3 }
gs2326plusMSTI5RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2326plusMSTI5BridgeSTPStatus 4 }
gs2326plusMSTI5RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2326plusMSTI5BridgeSTPStatus 5 }
gs2326plusMSTI5TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2326plusMSTI5BridgeSTPStatus 8 }
gs2326plusMSTI5TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2326plusMSTI5BridgeSTPStatus 9 }
gs2326plusMSTI5TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2326plusMSTI5BridgeSTPStatus 10 }
gs2326plusMSTI5PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMSTI5PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI5 Ports and Aggregations State Configurations. "
::= { gs2326plusMSTI5BridgeSTP 2 }
gs2326plusMSTI5PortStateEntry OBJECT-TYPE
SYNTAX Gs2326plusMSTI5PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMSTI5PortStateIndex }
::= { gs2326plusMSTI5PortStateTable 1 }
Gs2326plusMSTI5PortStateEntry ::= SEQUENCE {
gs2326plusMSTI5PortStateIndex Integer32,
gs2326plusMSTI5PortStatePort DisplayString,
gs2326plusMSTI5PortStatePortID DisplayString,
gs2326plusMSTI5PortStateRole DisplayString,
gs2326plusMSTI5PortStateState DisplayString,
gs2326plusMSTI5PortStatePathCost Integer32,
gs2326plusMSTI5PortStateEdge DisplayString,
gs2326plusMSTI5PortStatePoint2Point DisplayString,
gs2326plusMSTI5PortStateUptime DisplayString
}
gs2326plusMSTI5PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2326plusMSTI5PortStateEntry 1 }
gs2326plusMSTI5PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2326plusMSTI5PortStateEntry 2 }
gs2326plusMSTI5PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2326plusMSTI5PortStateEntry 3 }
gs2326plusMSTI5PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2326plusMSTI5PortStateEntry 4 }
gs2326plusMSTI5PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2326plusMSTI5PortStateEntry 5 }
gs2326plusMSTI5PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2326plusMSTI5PortStateEntry 6 }
gs2326plusMSTI5PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2326plusMSTI5PortStateEntry 7 }
gs2326plusMSTI5PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2326plusMSTI5PortStateEntry 8 }
gs2326plusMSTI5PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2326plusMSTI5PortStateEntry 9 }
gs2326plusMSTI6BridgeSTP OBJECT IDENTIFIER ::= { gs2326plusSTPBridgeStatus 7 }
gs2326plusMSTI6BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2326plusMSTI6BridgeSTP 1 }
gs2326plusMSTI6BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2326plusMSTI6BridgeSTPStatus 1 }
gs2326plusMSTI6BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2326plusMSTI6BridgeSTPStatus 2 }
gs2326plusMSTI6RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2326plusMSTI6BridgeSTPStatus 3 }
gs2326plusMSTI6RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2326plusMSTI6BridgeSTPStatus 4 }
gs2326plusMSTI6RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2326plusMSTI6BridgeSTPStatus 5 }
gs2326plusMSTI6TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2326plusMSTI6BridgeSTPStatus 8 }
gs2326plusMSTI6TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2326plusMSTI6BridgeSTPStatus 9 }
gs2326plusMSTI6TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2326plusMSTI6BridgeSTPStatus 10 }
gs2326plusMSTI6PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMSTI6PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI6 Ports and Aggregations State Configurations. "
::= { gs2326plusMSTI6BridgeSTP 2 }
gs2326plusMSTI6PortStateEntry OBJECT-TYPE
SYNTAX Gs2326plusMSTI6PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMSTI6PortStateIndex }
::= { gs2326plusMSTI6PortStateTable 1 }
Gs2326plusMSTI6PortStateEntry ::= SEQUENCE {
gs2326plusMSTI6PortStateIndex Integer32,
gs2326plusMSTI6PortStatePort DisplayString,
gs2326plusMSTI6PortStatePortID DisplayString,
gs2326plusMSTI6PortStateRole DisplayString,
gs2326plusMSTI6PortStateState DisplayString,
gs2326plusMSTI6PortStatePathCost Integer32,
gs2326plusMSTI6PortStateEdge DisplayString,
gs2326plusMSTI6PortStatePoint2Point DisplayString,
gs2326plusMSTI6PortStateUptime DisplayString
}
gs2326plusMSTI6PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2326plusMSTI6PortStateEntry 1 }
gs2326plusMSTI6PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2326plusMSTI6PortStateEntry 2 }
gs2326plusMSTI6PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2326plusMSTI6PortStateEntry 3 }
gs2326plusMSTI6PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2326plusMSTI6PortStateEntry 4 }
gs2326plusMSTI6PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2326plusMSTI6PortStateEntry 5 }
gs2326plusMSTI6PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2326plusMSTI6PortStateEntry 6 }
gs2326plusMSTI6PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2326plusMSTI6PortStateEntry 7 }
gs2326plusMSTI6PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2326plusMSTI6PortStateEntry 8 }
gs2326plusMSTI6PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2326plusMSTI6PortStateEntry 9 }
gs2326plusMSTI7BridgeSTP OBJECT IDENTIFIER ::= { gs2326plusSTPBridgeStatus 8 }
gs2326plusMSTI7BridgeSTPStatus OBJECT IDENTIFIER ::= { gs2326plusMSTI7BridgeSTP 1 }
gs2326plusMSTI7BridgeInstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge instance - CIST, MST1, ..."
::= { gs2326plusMSTI7BridgeSTPStatus 1 }
gs2326plusMSTI7BridgeID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of this Bridge instance."
::= { gs2326plusMSTI7BridgeSTPStatus 2 }
gs2326plusMSTI7RootID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge ID of the currently elected root bridge."
::= { gs2326plusMSTI7BridgeSTPStatus 3 }
gs2326plusMSTI7RootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port currently assigned the root port role."
::= { gs2326plusMSTI7BridgeSTPStatus 4 }
gs2326plusMSTI7RootCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Path Cost."
::= { gs2326plusMSTI7BridgeSTPStatus 5 }
gs2326plusMSTI7TopologyFlag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Topology Change Flag of this Bridge instance."
::= { gs2326plusMSTI7BridgeSTPStatus 8 }
gs2326plusMSTI7TopologyChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times where the topology change flag has been set."
::= { gs2326plusMSTI7BridgeSTPStatus 9 }
gs2326plusMSTI7TopologyChangeLast OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time passed since the Topology Flag was last set."
::= { gs2326plusMSTI7BridgeSTPStatus 10 }
gs2326plusMSTI7PortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusMSTI7PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show MSTI7 Ports and Aggregations State Configurations. "
::= { gs2326plusMSTI7BridgeSTP 2 }
gs2326plusMSTI7PortStateEntry OBJECT-TYPE
SYNTAX Gs2326plusMSTI7PortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusMSTI7PortStateIndex }
::= { gs2326plusMSTI7PortStateTable 1 }
Gs2326plusMSTI7PortStateEntry ::= SEQUENCE {
gs2326plusMSTI7PortStateIndex Integer32,
gs2326plusMSTI7PortStatePort DisplayString,
gs2326plusMSTI7PortStatePortID DisplayString,
gs2326plusMSTI7PortStateRole DisplayString,
gs2326plusMSTI7PortStateState DisplayString,
gs2326plusMSTI7PortStatePathCost Integer32,
gs2326plusMSTI7PortStateEdge DisplayString,
gs2326plusMSTI7PortStatePoint2Point DisplayString,
gs2326plusMSTI7PortStateUptime DisplayString
}
gs2326plusMSTI7PortStateIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2326plusMSTI7PortStateEntry 1 }
gs2326plusMSTI7PortStatePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port number of the logical STP port."
::= { gs2326plusMSTI7PortStateEntry 2 }
gs2326plusMSTI7PortStatePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id as used by the STP protocol.
This is the priority part and the logical port index of the bridge port."
::= { gs2326plusMSTI7PortStateEntry 3 }
gs2326plusMSTI7PortStateRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port role."
::= { gs2326plusMSTI7PortStateEntry 4 }
gs2326plusMSTI7PortStateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port state."
::= { gs2326plusMSTI7PortStateEntry 5 }
gs2326plusMSTI7PortStatePathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port path cost."
::= { gs2326plusMSTI7PortStateEntry 6 }
gs2326plusMSTI7PortStateEdge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port Edge Flag."
::= { gs2326plusMSTI7PortStateEntry 7 }
gs2326plusMSTI7PortStatePoint2Point OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current STP port point-to-point flag."
::= { gs2326plusMSTI7PortStateEntry 8 }
gs2326plusMSTI7PortStateUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the bridge port was last initialized."
::= { gs2326plusMSTI7PortStateEntry 9 }
gs2326plusSTPPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show STP Port Status."
::= { gs2326plusSTP 9 }
gs2326plusSTPPortStatusEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPPortStatusPort }
::= { gs2326plusSTPPortStatusTable 1 }
Gs2326plusSTPPortStatusEntry ::= SEQUENCE {
gs2326plusSTPPortStatusPort Integer32,
gs2326plusSTPPortStatusCISTRole DisplayString,
gs2326plusSTPPortStatusCISTState DisplayString,
gs2326plusSTPPortStatusUptime DisplayString
}
gs2326plusSTPPortStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPPortStatusEntry 1 }
gs2326plusSTPPortStatusCISTRole OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current STP port role of the CIST port. "
::= { gs2326plusSTPPortStatusEntry 2 }
gs2326plusSTPPortStatusCISTState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current STP port state of the CIST port. "
::= { gs2326plusSTPPortStatusEntry 3 }
gs2326plusSTPPortStatusUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The time since the bridge port was last initialized. "
::= { gs2326plusSTPPortStatusEntry 4 }
gs2326plusSTPPortStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusSTPPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Show STP Port Statistics."
::= { gs2326plusSTP 10 }
gs2326plusSTPPortStatisticsEntry OBJECT-TYPE
SYNTAX Gs2326plusSTPPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusSTPStatisticsIndex }
::= { gs2326plusSTPPortStatisticsTable 1 }
Gs2326plusSTPPortStatisticsEntry ::= SEQUENCE {
gs2326plusSTPStatisticsIndex Integer32,
gs2326plusSTPStatisticsPort DisplayString,
gs2326plusSTPStatisticsTxMSTP Counter32,
gs2326plusSTPStatisticsTxRSTP Counter32,
gs2326plusSTPStatisticsTxSTP Counter32,
gs2326plusSTPStatisticsTxTCN Counter32,
gs2326plusSTPStatisticsRxMSTP Counter32,
gs2326plusSTPStatisticsRxRSTP Counter32,
gs2326plusSTPStatisticsRxSTP Counter32,
gs2326plusSTPStatisticsRxTCN Counter32,
gs2326plusSTPStatisticsDiscardedUnknown Counter32,
gs2326plusSTPStatisticsDiscardedIllegal Counter32
}
gs2326plusSTPStatisticsIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table index."
::= { gs2326plusSTPPortStatisticsEntry 1 }
gs2326plusSTPStatisticsPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusSTPPortStatisticsEntry 2 }
gs2326plusSTPStatisticsTxMSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of MSTP Configuration BPDU's received/transmitted on the port."
::= { gs2326plusSTPPortStatisticsEntry 3 }
gs2326plusSTPStatisticsTxRSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of RSTP Configuration BPDU's received/transmitted on the port. "
::= { gs2326plusSTPPortStatisticsEntry 4 }
gs2326plusSTPStatisticsTxSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of legacy STP Configuration BPDU's received/transmitted on the port. "
::= { gs2326plusSTPPortStatisticsEntry 5 }
gs2326plusSTPStatisticsTxTCN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of Topology Change Notification BPDU's received/transmitted on the port. "
::= { gs2326plusSTPPortStatisticsEntry 6 }
gs2326plusSTPStatisticsRxMSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of MSTP Configuration BPDU's received/transmitted on the port."
::= { gs2326plusSTPPortStatisticsEntry 7 }
gs2326plusSTPStatisticsRxRSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of RSTP Configuration BPDU's received/transmitted on the port. "
::= { gs2326plusSTPPortStatisticsEntry 8 }
gs2326plusSTPStatisticsRxSTP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of legacy STP Configuration BPDU's received/transmitted on the port. "
::= { gs2326plusSTPPortStatisticsEntry 9 }
gs2326plusSTPStatisticsRxTCN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of Topology Change Notification BPDU's received/transmitted on the port. "
::= { gs2326plusSTPPortStatisticsEntry 10 }
gs2326plusSTPStatisticsDiscardedUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of unknown Spanning Tree BPDU's received and discarded on the port. "
::= { gs2326plusSTPPortStatisticsEntry 11 }
gs2326plusSTPStatisticsDiscardedIllegal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of illegal Spanning Tree BPDU's received and discarded on the port. "
::= { gs2326plusSTPPortStatisticsEntry 12 }
gs2326plusFilteringDataBase OBJECT IDENTIFIER ::= { gs2326plusConfiguration 21 }
gs2326plusFilteringDataBaseConfig OBJECT IDENTIFIER ::= { gs2326plusFilteringDataBase 1 }
gs2326plusFilteringDataBaseAgingTime OBJECT-TYPE
SYNTAX Integer32(0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure aging time by entering a value here in seconds.
default: 300,
range: 10-1000000.
Disable automatic aging : 0."
::= { gs2326plusFilteringDataBaseConfig 1 }
gs2326plusFilteringDataBaseConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSFilteringDataBaseConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusFilteringDataBaseConfig 2 }
gs2326plusFilteringDataBaseConfigEntry OBJECT-TYPE
SYNTAX GS2326PLUSFilteringDataBaseConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusFilteringDataBaseConfigPort }
::= { gs2326plusFilteringDataBaseConfigTable 1 }
GS2326PLUSFilteringDataBaseConfigEntry ::= SEQUENCE {
gs2326plusFilteringDataBaseConfigPort Integer32,
gs2326plusFilteringDataBaseConfigLearning INTEGER
}
gs2326plusFilteringDataBaseConfigPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusFilteringDataBaseConfigEntry 1 }
gs2326plusFilteringDataBaseConfigLearning OBJECT-TYPE
SYNTAX INTEGER { auto(0), disable(1), secure(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure learning mode of switch ports.
default: 0,
0: auto,
1: disable,
2: secure. "
::= { gs2326plusFilteringDataBaseConfigEntry 2 }
gs2326plusFilteringDataBaseStaticMAC OBJECT IDENTIFIER ::= { gs2326plusFilteringDataBaseConfig 3 }
gs2326plusFilteringDataBaseStaticMACCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create Static MAC Table"
::= { gs2326plusFilteringDataBaseStaticMAC 1 }
gs2326plusFilteringDataBaseStaticMACTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSFilteringDataBaseStaticMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusFilteringDataBaseStaticMAC 2 }
gs2326plusFilteringDataBaseStaticMACEntry OBJECT-TYPE
SYNTAX GS2326PLUSFilteringDataBaseStaticMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusFilteringDataBaseStaticMACIndex }
::= { gs2326plusFilteringDataBaseStaticMACTable 1 }
GS2326PLUSFilteringDataBaseStaticMACEntry ::= SEQUENCE {
gs2326plusFilteringDataBaseStaticMACIndex Integer32,
gs2326plusFilteringDataBaseStaticMACVLANId Integer32,
gs2326plusFilteringDataBaseStaticMACAddress MacAddress,
gs2326plusFilteringDataBaseStaticMACPortMembers DisplayString,
gs2326plusFilteringDataBaseStaticMACRowStatus INTEGER
}
gs2326plusFilteringDataBaseStaticMACIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusFilteringDataBaseStaticMACEntry 1 }
gs2326plusFilteringDataBaseStaticMACVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" VLAN ID, range: 1 - 4094. "
::= { gs2326plusFilteringDataBaseStaticMACEntry 2 }
gs2326plusFilteringDataBaseStaticMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" MAC address, format 0a 1b 2c 3d 4e 5f "
::= { gs2326plusFilteringDataBaseStaticMACEntry 3 }
gs2326plusFilteringDataBaseStaticMACPortMembers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To include the ports in a Static MAC Table"
::= { gs2326plusFilteringDataBaseStaticMACEntry 4 }
gs2326plusFilteringDataBaseStaticMACRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2326plusFilteringDataBaseStaticMACEntry 5 }
gs2326plusFilteringDataBaseDynamicMACTable OBJECT-TYPE
SYNTAX SEQUENCE OF GS2326PLUSFilteringDataBaseDynamicMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusFilteringDataBaseConfig 4 }
gs2326plusFilteringDataBaseDynamicMACEntry OBJECT-TYPE
SYNTAX GS2326PLUSFilteringDataBaseDynamicMACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusFilteringDataBaseDynamicMACIndex }
::= { gs2326plusFilteringDataBaseDynamicMACTable 1 }
GS2326PLUSFilteringDataBaseDynamicMACEntry ::= SEQUENCE {
gs2326plusFilteringDataBaseDynamicMACIndex Integer32,
gs2326plusFilteringDataBaseDynamicMACType INTEGER,
gs2326plusFilteringDataBaseDynamicMACVLAN Integer32,
gs2326plusFilteringDataBaseDynamicMACAddress MacAddress,
gs2326plusFilteringDataBaseDynamicPortMembers DisplayString
}
gs2326plusFilteringDataBaseDynamicMACIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusFilteringDataBaseDynamicMACEntry 1 }
gs2326plusFilteringDataBaseDynamicMACType OBJECT-TYPE
SYNTAX INTEGER { dynamic(0), static(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the entry is a static or a dynamic entry."
::= { gs2326plusFilteringDataBaseDynamicMACEntry 2 }
gs2326plusFilteringDataBaseDynamicMACVLAN OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the entry."
::= { gs2326plusFilteringDataBaseDynamicMACEntry 3 }
gs2326plusFilteringDataBaseDynamicMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the entry."
::= { gs2326plusFilteringDataBaseDynamicMACEntry 4 }
gs2326plusFilteringDataBaseDynamicPortMembers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that are members of the entry."
::= { gs2326plusFilteringDataBaseDynamicMACEntry 5 }
gs2326plusSFlowAgent OBJECT IDENTIFIER ::= { gs2326plusConfiguration 22 }
gs2326plusSFlowAgentCollector OBJECT IDENTIFIER ::= { gs2326plusSFlowAgent 1 }
gs2326plusSFlowAgentReceiverMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusSFlowAgentCollector 1 }
gs2326plusLMC OBJECT IDENTIFIER ::= { gs2326plusConfiguration 1500 }
gs2326plusLMCOperating OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1), try(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: disabled
1: enabled
2: try"
::= { gs2326plusLMC 1 }
gs2326plusLMCConfigViaDhcp OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: disabled
1: enabled"
::= { gs2326plusLMC 2 }
gs2326plusLMCDomain OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: disabled
1: enabled"
::= { gs2326plusLMC 3 }
gs2326plusLMCDhcpClientAutoRenew OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: disabled
1: enabled"
::= { gs2326plusLMC 4 }
gs2326plusLMCZeroTouchSupport OBJECT-TYPE
SYNTAX INTEGER { No(0), Yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: No
1: Yes"
::= { gs2326plusLMC 50 }
gs2326plusLMCPairingTokenPresent OBJECT-TYPE
SYNTAX INTEGER { No(0), Yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: No
1: Yes"
::= { gs2326plusLMC 51 }
gs2326plusLMCClientStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusLMC 52 }
gs2326plusLMCManagementStatus OBJECT-TYPE
SYNTAX INTEGER {Unpaired(0), Paired(1), PairedAndClaimed(14)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: Unpaired
1: Paired
14: PairedAndClaimed"
::= { gs2326plusLMC 53 }
gs2326plusLMCControlStatus OBJECT-TYPE
SYNTAX INTEGER {Disabled(2), Operating(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"2: Disabled
4: Operating"
::= { gs2326plusLMC 54 }
gs2326plusLMCMonitoringStatus OBJECT-TYPE
SYNTAX INTEGER {Disabled(2), Operating(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"2: Disabled
4: Operating"
::= { gs2326plusLMC 55 }
gs2326plusLMCConfigurationSource OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusLMC 56 }
gs2326plusLMCConfigModified OBJECT-TYPE
SYNTAX INTEGER { No(0), Yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: No
1: Yes"
::= { gs2326plusLMC 57 }
gs2326plusLMCDeviceID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusLMC 58 }
gs2326plusLMCRoundTripTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusLMC 100 }
----------------------------------------------------------------------------------------------------------------------------
gs2326plusSecurity OBJECT IDENTIFIER ::= { lancomGS2326plus 3 }
gs2326plusIPSourceGuard OBJECT IDENTIFIER ::= { gs2326plusSecurity 1 }
gs2326plusIPSourceGuardConf OBJECT IDENTIFIER ::= { gs2326plusIPSourceGuard 1 }
gs2326plusIPSourceGuardMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" default: 0
0: disable
1: enable"
::= { gs2326plusIPSourceGuardConf 1 }
gs2326plusIPSourceGuardPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIPSourceGuardPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuardConf 2 }
gs2326plusIPSourceGuardPortConfigEntry OBJECT-TYPE
SYNTAX Gs2326plusIPSourceGuardPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusIPSourceGuardPortConfigPort }
::= { gs2326plusIPSourceGuardPortConfigTable 1 }
Gs2326plusIPSourceGuardPortConfigEntry ::= SEQUENCE {
gs2326plusIPSourceGuardPortConfigPort Integer32,
gs2326plusIPSourceGuardPortConfigMode INTEGER,
gs2326plusIPSourceGuardPortMaxDynamicClients Integer32
}
gs2326plusIPSourceGuardPortConfigPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuardPortConfigEntry 1 }
gs2326plusIPSourceGuardPortConfigMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable "
::= { gs2326plusIPSourceGuardPortConfigEntry 2 }
gs2326plusIPSourceGuardPortMaxDynamicClients OBJECT-TYPE
SYNTAX Integer32(0..2|99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 99
0~2: Max Dynamic clients
99:Unlimited "
::= { gs2326plusIPSourceGuardPortConfigEntry 3 }
gs2326plusIPSourceGuardStatic OBJECT IDENTIFIER ::= { gs2326plusIPSourceGuard 2 }
gs2326plusIPSourceGuardStaticCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create a IP Source Guard"
::= { gs2326plusIPSourceGuardStatic 1 }
gs2326plusIPSourceGuardStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIPSourceGuardStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuardStatic 2 }
gs2326plusIPSourceGuardStaticEntry OBJECT-TYPE
SYNTAX Gs2326plusIPSourceGuardStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusIPSourceGuardStaticIndex }
::= { gs2326plusIPSourceGuardStaticTable 1 }
Gs2326plusIPSourceGuardStaticEntry ::= SEQUENCE {
gs2326plusIPSourceGuardStaticIndex Integer32,
gs2326plusIPSourceGuardStaticPort Integer32,
gs2326plusIPSourceGuardStaticVLANId Integer32,
gs2326plusIPSourceGuardStaticIPAddress IpAddress,
gs2326plusIPSourceGuardStaticMACAddress MacAddress,
gs2326plusIPSourceGuardStaticRowStatus INTEGER
}
gs2326plusIPSourceGuardStaticIndex OBJECT-TYPE
SYNTAX Integer32(1..28)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuardStaticEntry 1 }
gs2326plusIPSourceGuardStaticPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 1 - port number. "
::= { gs2326plusIPSourceGuardStaticEntry 2 }
gs2326plusIPSourceGuardStaticVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" VLAN ID, range: 1 - 4094. "
::= { gs2326plusIPSourceGuardStaticEntry 3 }
gs2326plusIPSourceGuardStaticIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP address allowed for doing IP source guard. "
::= { gs2326plusIPSourceGuardStaticEntry 4 }
gs2326plusIPSourceGuardStaticMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Allowed Source MAC address, format 0a 1b 2c 3d 4e 5f "
::= { gs2326plusIPSourceGuardStaticEntry 5 }
gs2326plusIPSourceGuardStaticRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2326plusIPSourceGuardStaticEntry 6 }
gs2326plusIPSourceGuardDynamicTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusIPSourceGuardDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuard 3 }
gs2326plusIPSourceGuardDynamicEntry OBJECT-TYPE
SYNTAX Gs2326plusIPSourceGuardDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusIPSourceGuardDynamicIndex }
::= { gs2326plusIPSourceGuardDynamicTable 1 }
Gs2326plusIPSourceGuardDynamicEntry ::= SEQUENCE {
gs2326plusIPSourceGuardDynamicIndex Integer32,
gs2326plusIPSourceGuardDynamicPort Integer32,
gs2326plusIPSourceGuardDynamicVLANId Integer32,
gs2326plusIPSourceGuardDynamicIPAddress IpAddress,
gs2326plusIPSourceGuardDynamicMACAddress MacAddress
}
gs2326plusIPSourceGuardDynamicIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuardDynamicEntry 1 }
gs2326plusIPSourceGuardDynamicPort OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuardDynamicEntry 2 }
gs2326plusIPSourceGuardDynamicVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuardDynamicEntry 3 }
gs2326plusIPSourceGuardDynamicIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuardDynamicEntry 4 }
gs2326plusIPSourceGuardDynamicMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusIPSourceGuardDynamicEntry 5 }
gs2326plusARPInspection OBJECT IDENTIFIER ::= { gs2326plusSecurity 2 }
gs2326plusARPInspectionConf OBJECT IDENTIFIER ::= { gs2326plusARPInspection 1 }
gs2326plusARPInspectionConfMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2326plusARPInspectionConf 1 }
gs2326plusARPInspectionConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusARPInspectionConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusARPInspectionConf 2 }
gs2326plusARPInspectionConfEntry OBJECT-TYPE
SYNTAX Gs2326plusARPInspectionConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusARPInspectionConfPortIndex }
::= { gs2326plusARPInspectionConfTable 1 }
Gs2326plusARPInspectionConfEntry ::= SEQUENCE {
gs2326plusARPInspectionConfPortIndex Integer32,
gs2326plusARPInspectionConfPortMode INTEGER
}
gs2326plusARPInspectionConfPortIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusARPInspectionConfEntry 1 }
gs2326plusARPInspectionConfPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2326plusARPInspectionConfEntry 2 }
gs2326plusARPInspectionStatic OBJECT IDENTIFIER ::= { gs2326plusARPInspection 2 }
gs2326plusARPInspectionStaticCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: create"
::= { gs2326plusARPInspectionStatic 1 }
gs2326plusARPInspectionStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusARPInspectionStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusARPInspectionStatic 2 }
gs2326plusARPInspectionStaticEntry OBJECT-TYPE
SYNTAX Gs2326plusARPInspectionStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusARPInspectionStaticIndex }
::= { gs2326plusARPInspectionStaticTable 1 }
Gs2326plusARPInspectionStaticEntry ::= SEQUENCE {
gs2326plusARPInspectionStaticIndex Integer32,
gs2326plusARPInspectionStaticPort Integer32,
gs2326plusARPInspectionStaticVLANId Integer32,
gs2326plusARPInspectionStaticIPAddress IpAddress,
gs2326plusARPInspectionStaticMACAddress MacAddress,
gs2326plusARPInspectionStaticRowStatus INTEGER
}
gs2326plusARPInspectionStaticIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2326plusARPInspectionStaticEntry 1 }
gs2326plusARPInspectionStaticPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 1 - port number. "
::= { gs2326plusARPInspectionStaticEntry 2 }
gs2326plusARPInspectionStaticVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" VLAN ID, range: 1 - 4094. "
::= { gs2326plusARPInspectionStaticEntry 3 }
gs2326plusARPInspectionStaticIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP address allowed for doing ARP request. "
::= { gs2326plusARPInspectionStaticEntry 4 }
gs2326plusARPInspectionStaticMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Allowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f "
::= { gs2326plusARPInspectionStaticEntry 5 }
gs2326plusARPInspectionStaticRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2326plusARPInspectionStaticEntry 6 }
gs2326plusARPInspectionDynamicTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusARPInspectionDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusARPInspection 3 }
gs2326plusARPInspectionDynamicEntry OBJECT-TYPE
SYNTAX Gs2326plusARPInspectionDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusARPInspectionDynamicIndex }
::= { gs2326plusARPInspectionDynamicTable 1 }
Gs2326plusARPInspectionDynamicEntry ::= SEQUENCE {
gs2326plusARPInspectionDynamicIndex Integer32,
gs2326plusARPInspectionDynamicPort Integer32,
gs2326plusARPInspectionDynamicVLANId Integer32,
gs2326plusARPInspectionDynamicIPAddress IpAddress,
gs2326plusARPInspectionDynamicMACAddress MacAddress
}
gs2326plusARPInspectionDynamicIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusARPInspectionDynamicEntry 1 }
gs2326plusARPInspectionDynamicPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusARPInspectionDynamicEntry 2 }
gs2326plusARPInspectionDynamicVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusARPInspectionDynamicEntry 3 }
gs2326plusARPInspectionDynamicIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusARPInspectionDynamicEntry 4 }
gs2326plusARPInspectionDynamicMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusARPInspectionDynamicEntry 5 }
gs2326plusARPStaticGatewayCtrl OBJECT IDENTIFIER ::= { gs2326plusARPInspection 6 }
gs2326plusARPStaticGatewayCtrlSystemConf OBJECT IDENTIFIER ::= { gs2326plusARPStaticGatewayCtrl 1 }
gs2326plusARPStaticGatewayCtrlMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusARPStaticGatewayCtrlSystemConf 1 }
gs2326plusARPStaticGatewayCtrlCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: create"
::= { gs2326plusARPStaticGatewayCtrl 2 }
gs2326plusARPStaticGatewayCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusARPStaticGatewayCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusARPStaticGatewayCtrl 3 }
gs2326plusARPStaticGatewayCtrlEntry OBJECT-TYPE
SYNTAX Gs2326plusARPStaticGatewayCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusARPStaticGatewayCtrlIndex }
::= { gs2326plusARPStaticGatewayCtrlTable 1 }
Gs2326plusARPStaticGatewayCtrlEntry ::= SEQUENCE {
gs2326plusARPStaticGatewayCtrlIndex Integer32,
gs2326plusARPStaticGatewayCtrlIPAddress IpAddress,
gs2326plusARPStaticGatewayCtrlMACAddress MacAddress,
gs2326plusARPStaticGatewayCtrlPort Integer32,
gs2326plusARPStaticGatewayCtrlAction INTEGER,
gs2326plusARPStaticGatewayCtrlState DisplayString,
gs2326plusARPStaticGatewayCtrlReOpen INTEGER,
gs2326plusARPStaticGatewayCtrlRowStatus INTEGER
}
gs2326plusARPStaticGatewayCtrlIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2326plusARPStaticGatewayCtrlEntry 1 }
gs2326plusARPStaticGatewayCtrlIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source IP address. "
::= { gs2326plusARPStaticGatewayCtrlEntry 2 }
gs2326plusARPStaticGatewayCtrlMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source MAC address , format 0a 1b 2c 3d 4e 5f "
::= { gs2326plusARPStaticGatewayCtrlEntry 3 }
gs2326plusARPStaticGatewayCtrlPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 1 - port number. "
::= { gs2326plusARPStaticGatewayCtrlEntry 4 }
gs2326plusARPStaticGatewayCtrlAction OBJECT-TYPE
SYNTAX INTEGER {none(0),trap(1),dropAndTrap(2), shutdown(3), trapAndShutdown(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: trap
2: drop&trap
3: shutdown
4: trap&shutdown"
::= { gs2326plusARPStaticGatewayCtrlEntry 5 }
gs2326plusARPStaticGatewayCtrlState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusARPStaticGatewayCtrlEntry 6 }
gs2326plusARPStaticGatewayCtrlReOpen OBJECT-TYPE
SYNTAX INTEGER { none(0), reopen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: reopen"
::= { gs2326plusARPStaticGatewayCtrlEntry 7 }
gs2326plusARPStaticGatewayCtrlRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2326plusARPStaticGatewayCtrlEntry 8 }
gs2326plusARPSpoofingPrevention OBJECT IDENTIFIER ::= { gs2326plusARPInspection 7 }
gs2326plusARPSpoofingPreventionSystemConf OBJECT IDENTIFIER ::= { gs2326plusARPSpoofingPrevention 1 }
gs2326plusARPSpoofingPreventionMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusARPSpoofingPreventionSystemConf 1 }
gs2326plusARPSpoofingPreventionTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusARPSpoofingPreventionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusARPSpoofingPrevention 2 }
gs2326plusARPSpoofingPreventionEntry OBJECT-TYPE
SYNTAX Gs2326plusARPSpoofingPreventionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusARPSpoofingPreventionPort }
::= { gs2326plusARPSpoofingPreventionTable 1 }
Gs2326plusARPSpoofingPreventionEntry ::= SEQUENCE {
gs2326plusARPSpoofingPreventionPort Integer32,
gs2326plusARPSpoofingPreventionPortMode INTEGER,
gs2326plusARPSpoofingPreventionPortLimit Integer32,
gs2326plusARPSpoofingPreventionPortAction INTEGER,
gs2326plusARPSpoofingPreventionPortState DisplayString,
gs2326plusARPSpoofingPreventionPortReOpen INTEGER
}
gs2326plusARPSpoofingPreventionPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusARPSpoofingPreventionEntry 1 }
gs2326plusARPSpoofingPreventionPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2326plusARPSpoofingPreventionEntry 2 }
gs2326plusARPSpoofingPreventionPortLimit OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1, range: 1-100"
::= { gs2326plusARPSpoofingPreventionEntry 3 }
gs2326plusARPSpoofingPreventionPortAction OBJECT-TYPE
SYNTAX INTEGER { none(0), trap(1), dropAndTrap(2), shutdown(3), trapAndShutdown(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: trap
2: drop&trap
3: shutdown
4: trap&shutdown"
::= { gs2326plusARPSpoofingPreventionEntry 4 }
gs2326plusARPSpoofingPreventionPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusARPSpoofingPreventionEntry 5 }
gs2326plusARPSpoofingPreventionPortReOpen OBJECT-TYPE
SYNTAX INTEGER { none(0), reopen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: reopen"
::= { gs2326plusARPSpoofingPreventionEntry 6 }
gs2326plusARPIPDoSPrevention OBJECT IDENTIFIER ::= { gs2326plusARPInspection 8 }
gs2326plusARPIPDoSPreventionTCPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusARPIPDoSPrevention 1 }
gs2326plusARPIPDoSPreventionUDPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusARPIPDoSPrevention 2 }
gs2326plusARPIPDoSPreventionICMPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusARPIPDoSPrevention 3 }
gs2326plusARPIPDoSPreventionServerPort1 OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 0 - port number. 0: none. "
::= { gs2326plusARPIPDoSPrevention 4 }
gs2326plusARPIPDoSPreventionServerPort2 OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 0 - port number. 0: none. "
::= { gs2326plusARPIPDoSPrevention 5 }
gs2326plusARPIPDoSPreventionServerPort3 OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 0 - port number. 0: none. "
::= { gs2326plusARPIPDoSPrevention 6 }
gs2326plusARPIPDoSPreventionServerPort4 OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port, range: 0 - port number. 0: none. "
::= { gs2326plusARPIPDoSPrevention 7 }
gs2326plusDHCPSnooping OBJECT IDENTIFIER ::= { gs2326plusSecurity 3 }
gs2326plusDHCPSnoopingConf OBJECT IDENTIFIER ::= { gs2326plusDHCPSnooping 1 }
gs2326plusDHCPSnoopingMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2326plusDHCPSnoopingConf 1 }
gs2326plusDHCPSnoopingPortModeConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusDHCPSnoopingPortModeConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingConf 2 }
gs2326plusDHCPSnoopingPortModeConfigurationEntry OBJECT-TYPE
SYNTAX Gs2326plusDHCPSnoopingPortModeConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusDHCPSnoopingPortModeConfigurationPort }
::= { gs2326plusDHCPSnoopingPortModeConfigurationTable 1 }
Gs2326plusDHCPSnoopingPortModeConfigurationEntry ::= SEQUENCE {
gs2326plusDHCPSnoopingPortModeConfigurationPort Integer32,
gs2326plusDHCPSnoopingPortModeConfigurationMode INTEGER
}
gs2326plusDHCPSnoopingPortModeConfigurationPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingPortModeConfigurationEntry 1 }
gs2326plusDHCPSnoopingPortModeConfigurationMode OBJECT-TYPE
SYNTAX INTEGER { trust(0), untrust(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: trust port mode
1: untrust port mode"
::= { gs2326plusDHCPSnoopingPortModeConfigurationEntry 2 }
gs2326plusDHCPSnoopingStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusDHCPSnoopingStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnooping 2 }
gs2326plusDHCPSnoopingStatisticsEntry OBJECT-TYPE
SYNTAX Gs2326plusDHCPSnoopingStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusDHCPSnoopingStatisticsPort }
::= { gs2326plusDHCPSnoopingStatisticsTable 1 }
Gs2326plusDHCPSnoopingStatisticsEntry ::= SEQUENCE {
gs2326plusDHCPSnoopingStatisticsPort Integer32,
gs2326plusDHCPSnoopingStatisticsClear INTEGER,
gs2326plusDHCPSnoopingRxDiscover Counter32,
gs2326plusDHCPSnoopingRxOffer Counter32,
gs2326plusDHCPSnoopingRxRequest Counter32,
gs2326plusDHCPSnoopingRxDecline Counter32,
gs2326plusDHCPSnoopingRxACK Counter32,
gs2326plusDHCPSnoopingRxNAK Counter32,
gs2326plusDHCPSnoopingRxRelease Counter32,
gs2326plusDHCPSnoopingRxInform Counter32,
gs2326plusDHCPSnoopingRxLeaseQuery Counter32,
gs2326plusDHCPSnoopingRxLeaseUnassigned Counter32,
gs2326plusDHCPSnoopingRxLeaseUnknown Counter32,
gs2326plusDHCPSnoopingRxLeaseActive Counter32,
gs2326plusDHCPSnoopingTxDiscover Counter32,
gs2326plusDHCPSnoopingTxOffer Counter32,
gs2326plusDHCPSnoopingTxRequest Counter32,
gs2326plusDHCPSnoopingTxDecline Counter32,
gs2326plusDHCPSnoopingTxACK Counter32,
gs2326plusDHCPSnoopingTxNAK Counter32,
gs2326plusDHCPSnoopingTxRelease Counter32,
gs2326plusDHCPSnoopingTxInform Counter32,
gs2326plusDHCPSnoopingTxLeaseQuery Counter32,
gs2326plusDHCPSnoopingTxLeaseUnassigned Counter32,
gs2326plusDHCPSnoopingTxLeaseUnknown Counter32,
gs2326plusDHCPSnoopingTxLeaseActive Counter32
}
gs2326plusDHCPSnoopingStatisticsPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 1 }
gs2326plusDHCPSnoopingStatisticsClear OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: clear"
::= { gs2326plusDHCPSnoopingStatisticsEntry 2 }
gs2326plusDHCPSnoopingRxDiscover OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 3 }
gs2326plusDHCPSnoopingRxOffer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 4 }
gs2326plusDHCPSnoopingRxRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 5 }
gs2326plusDHCPSnoopingRxDecline OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 6 }
gs2326plusDHCPSnoopingRxACK OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 7 }
gs2326plusDHCPSnoopingRxNAK OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 8 }
gs2326plusDHCPSnoopingRxRelease OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 9 }
gs2326plusDHCPSnoopingRxInform OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 10 }
gs2326plusDHCPSnoopingRxLeaseQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 11 }
gs2326plusDHCPSnoopingRxLeaseUnassigned OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 12 }
gs2326plusDHCPSnoopingRxLeaseUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 13 }
gs2326plusDHCPSnoopingRxLeaseActive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 14 }
gs2326plusDHCPSnoopingTxDiscover OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 15 }
gs2326plusDHCPSnoopingTxOffer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 16 }
gs2326plusDHCPSnoopingTxRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 17 }
gs2326plusDHCPSnoopingTxDecline OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 18 }
gs2326plusDHCPSnoopingTxACK OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 19 }
gs2326plusDHCPSnoopingTxNAK OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 20 }
gs2326plusDHCPSnoopingTxRelease OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 21 }
gs2326plusDHCPSnoopingTxInform OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 22 }
gs2326plusDHCPSnoopingTxLeaseQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 23 }
gs2326plusDHCPSnoopingTxLeaseUnassigned OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 24 }
gs2326plusDHCPSnoopingTxLeaseUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 25 }
gs2326plusDHCPSnoopingTxLeaseActive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPSnoopingStatisticsEntry 26 }
gs2326plusDHCPRelay OBJECT IDENTIFIER ::= { gs2326plusSecurity 4 }
gs2326plusDHCPRelayConfiguration OBJECT IDENTIFIER ::= { gs2326plusDHCPRelay 1 }
gs2326plusDHCPRelayMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable
We need at least one server"
::= { gs2326plusDHCPRelayConfiguration 1 }
gs2326plusDHCPRelayServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayConfiguration 2 }
gs2326plusDHCPRelayInformationMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusDHCPRelayConfiguration 3 }
gs2326plusDHCPRelayInformationPolicy OBJECT-TYPE
SYNTAX INTEGER { replace(0), keep(1), drop(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: replace
1: keep
2: drop "
::= { gs2326plusDHCPRelayConfiguration 4 }
gs2326plusDHCPRelayInformationCustom OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Option 82 Circuit ID custom information"
::= { gs2326plusDHCPRelayConfiguration 1500 }
gs2326plusDHCPRelayConfigurationGateways OBJECT IDENTIFIER ::= { gs2326plusDHCPRelayConfiguration 5 }
gs2326plusDHCPRelayConfigurationGatewaysCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0 : None (read only)
1 : Create entry"
::= { gs2326plusDHCPRelayConfigurationGateways 1 }
gs2326plusDHCPRelayConfigurationGatewaysTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusDHCPRelayConfigurationGatewaysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Create DHCP Relay Gateway IP address entry."
::= { gs2326plusDHCPRelayConfigurationGateways 2 }
gs2326plusDHCPRelayConfigurationGatewaysEntry OBJECT-TYPE
SYNTAX Gs2326plusDHCPRelayConfigurationGatewaysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusDHCPRelayConfigurationGatewaysIndex }
::= { gs2326plusDHCPRelayConfigurationGatewaysTable 1 }
Gs2326plusDHCPRelayConfigurationGatewaysEntry ::= SEQUENCE {
gs2326plusDHCPRelayConfigurationGatewaysIndex Integer32,
gs2326plusDHCPRelayConfigurationGatewaysVLANId Integer32,
gs2326plusDHCPRelayConfigurationGatewaysIP IpAddress,
gs2326plusDHCPRelayConfigurationGatewaysRowStatus INTEGER
}
gs2326plusDHCPRelayConfigurationGatewaysIndex OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayConfigurationGatewaysEntry 1 }
gs2326plusDHCPRelayConfigurationGatewaysVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" VLAN ID "
::= { gs2326plusDHCPRelayConfigurationGatewaysEntry 2 }
gs2326plusDHCPRelayConfigurationGatewaysIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP GIADDR address."
::= { gs2326plusDHCPRelayConfigurationGatewaysEntry 3 }
gs2326plusDHCPRelayConfigurationGatewaysRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
4: destroy
5: undo"
::= { gs2326plusDHCPRelayConfigurationGatewaysEntry 4 }
gs2326plusDHCPRelayStatistics OBJECT IDENTIFIER ::= { gs2326plusDHCPRelay 2 }
gs2326plusDHCPRelayServerStatistics OBJECT IDENTIFIER ::= { gs2326plusDHCPRelayStatistics 1 }
gs2326plusServerStatTransmitToServer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayServerStatistics 1 }
gs2326plusServerStatTransmitError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayServerStatistics 2 }
gs2326plusServerStatReceiveFromServer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayServerStatistics 3 }
gs2326plusServerStatReceiveMissingAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayServerStatistics 4 }
gs2326plusServerStatReceiveMissingCircuitID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayServerStatistics 5 }
gs2326plusServerStatReceiveMissingRemoteID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayServerStatistics 6 }
gs2326plusServerStatReceiveBadCircuitID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayServerStatistics 7 }
gs2326plusServerStatReceiveBadRemoteID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayServerStatistics 8 }
gs2326plusDHCPRelayClientStatistics OBJECT IDENTIFIER ::= { gs2326plusDHCPRelayStatistics 2 }
gs2326plusClientStatTransmitToClient OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayClientStatistics 1 }
gs2326plusClientStatTransmitError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayClientStatistics 2 }
gs2326plusClientStatReceivefromClient OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayClientStatistics 3 }
gs2326plusClientStatReceiveAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayClientStatistics 4 }
gs2326plusClientStatReplaceAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayClientStatistics 5 }
gs2326plusClientStatKeepAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayClientStatistics 6 }
gs2326plusClientStatDropAgentOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusDHCPRelayClientStatistics 7 }
gs2326plusPortSecurity OBJECT IDENTIFIER ::= { gs2326plusSecurity 5 }
gs2326plusPortSecLimitCtrl OBJECT IDENTIFIER ::= { gs2326plusPortSecurity 1 }
gs2326plusPortSecLimitCtrlSystemConf OBJECT IDENTIFIER ::= { gs2326plusPortSecLimitCtrl 1 }
gs2326plusPortSecurityMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusPortSecLimitCtrlSystemConf 1 }
gs2326plusPortSecurityAging OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusPortSecLimitCtrlSystemConf 2 }
gs2326plusPortSecurityAgingPeriod OBJECT-TYPE
SYNTAX INTEGER(10..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 3600, range: 10-10000000 "
::= { gs2326plusPortSecLimitCtrlSystemConf 3 }
gs2326plusPortSecLimitCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusPortSecLimitCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecLimitCtrl 2 }
gs2326plusPortSecLimitCtrlEntry OBJECT-TYPE
SYNTAX Gs2326plusPortSecLimitCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusPortSecLimitCtrlPort }
::= { gs2326plusPortSecLimitCtrlTable 1 }
Gs2326plusPortSecLimitCtrlEntry ::= SEQUENCE {
gs2326plusPortSecLimitCtrlPort Integer32,
gs2326plusPortSecLimitCtrlPortMode INTEGER,
gs2326plusPortSecLimitCtrlPortLimit Integer32,
gs2326plusPortSecLimitCtrlPortAction INTEGER,
gs2326plusPortSecLimitCtrlPortState DisplayString,
gs2326plusPortSecLimitCtrlPortReOpen INTEGER
}
gs2326plusPortSecLimitCtrlPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecLimitCtrlEntry 1 }
gs2326plusPortSecLimitCtrlPortMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2326plusPortSecLimitCtrlEntry 2 }
gs2326plusPortSecLimitCtrlPortLimit OBJECT-TYPE
SYNTAX Integer32(1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 4, range: 1-1024"
::= { gs2326plusPortSecLimitCtrlEntry 3 }
gs2326plusPortSecLimitCtrlPortAction OBJECT-TYPE
SYNTAX INTEGER { none(0), trap(1), shutdown(2), trapShutdown(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: trap
2: shutdown
3: trap&shutdown"
::= { gs2326plusPortSecLimitCtrlEntry 4 }
gs2326plusPortSecLimitCtrlPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusPortSecLimitCtrlEntry 5 }
gs2326plusPortSecLimitCtrlPortReOpen OBJECT-TYPE
SYNTAX INTEGER { none(0), reopen(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: reopen"
::= { gs2326plusPortSecLimitCtrlEntry 6 }
gs2326plusPortSecSwitchStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusPortSecSwitchStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecurity 2 }
gs2326plusPortSecSwitchStatusEntry OBJECT-TYPE
SYNTAX Gs2326plusPortSecSwitchStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusPortSecSwitchStatusPort }
::= { gs2326plusPortSecSwitchStatusTable 1 }
Gs2326plusPortSecSwitchStatusEntry ::= SEQUENCE {
gs2326plusPortSecSwitchStatusPort Integer32,
gs2326plusPortSecSwitchStatusUsers DisplayString,
gs2326plusPortSecSwitchStatusState DisplayString,
gs2326plusPortSecSwitchStatusMACCountCurrent Integer32,
gs2326plusPortSecSwitchStatusMACCountLimit Integer32
}
gs2326plusPortSecSwitchStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecSwitchStatusEntry 1 }
gs2326plusPortSecSwitchStatusUsers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN,
'-' means that the corresponding user module is not enabled. "
::= { gs2326plusPortSecSwitchStatusEntry 2 }
gs2326plusPortSecSwitchStatusState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown. "
::= { gs2326plusPortSecSwitchStatusEntry 3 }
gs2326plusPortSecSwitchStatusMACCountCurrent OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusPortSecSwitchStatusEntry 4 }
gs2326plusPortSecSwitchStatusMACCountLimit OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { gs2326plusPortSecSwitchStatusEntry 5 }
gs2326plusPortSecPortStatus OBJECT IDENTIFIER ::= { gs2326plusPortSecurity 3 }
gs2326plusPortSecPortStatusPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port number
default: 1
range: 1 - port number."
::= { gs2326plusPortSecPortStatus 1 }
gs2326plusPortSecPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusPortSecPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecPortStatus 2 }
gs2326plusPortSecPortStatusEntry OBJECT-TYPE
SYNTAX Gs2326plusPortSecPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusPortSecPortStatusIndex }
::= { gs2326plusPortSecPortStatusTable 1 }
Gs2326plusPortSecPortStatusEntry ::= SEQUENCE {
gs2326plusPortSecPortStatusIndex Integer32,
gs2326plusPortSecPortStatusMACAddress MacAddress,
gs2326plusPortSecPortStatusVLANId Integer32,
gs2326plusPortSecPortStatusState DisplayString,
gs2326plusPortSecPortStatusTimeOfAddition DisplayString,
gs2326plusPortSecPortStatusAgeAndHold DisplayString
}
gs2326plusPortSecPortStatusIndex OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecPortStatusEntry 1 }
gs2326plusPortSecPortStatusMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecPortStatusEntry 2 }
gs2326plusPortSecPortStatusVLANId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecPortStatusEntry 3 }
gs2326plusPortSecPortStatusState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Blocked / Forwarding "
::= { gs2326plusPortSecPortStatusEntry 4 }
gs2326plusPortSecPortStatusTimeOfAddition OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecPortStatusEntry 5 }
gs2326plusPortSecPortStatusAgeAndHold OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusPortSecPortStatusEntry 6 }
gs2326plusAccessManagement OBJECT IDENTIFIER ::= { gs2326plusSecurity 6 }
gs2326plusAccessMgtConf OBJECT IDENTIFIER ::= { gs2326plusAccessManagement 1 }
gs2326plusAccessMgtConfMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusAccessMgtConf 1 }
gs2326plusAccessMgtConfCreate OBJECT-TYPE
SYNTAX INTEGER { none(0), create(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: none
1: create "
::= { gs2326plusAccessMgtConf 2 }
gs2326plusAccessMgtConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusAccessMgtConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtConf 3 }
gs2326plusAccessMgtConfEntry OBJECT-TYPE
SYNTAX Gs2326plusAccessMgtConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusAccessMgtIndex }
::= { gs2326plusAccessMgtConfTable 1 }
Gs2326plusAccessMgtConfEntry ::= SEQUENCE {
gs2326plusAccessMgtIndex Integer32,
gs2326plusAccessMgtAddresstype INTEGER,
gs2326plusAccessMgtStartIpAddress DisplayString,
gs2326plusAccessMgtEndIpAddress DisplayString,
gs2326plusAccessMgtHttpHttps INTEGER,
gs2326plusAccessMgtSNMP INTEGER,
gs2326plusAccessMgtTelnetSSH INTEGER,
gs2326plusAccessMgtRowStatus INTEGER
}
gs2326plusAccessMgtIndex OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Access Management config index
range : 1-16."
::= { gs2326plusAccessMgtConfEntry 1 }
gs2326plusAccessMgtAddresstype OBJECT-TYPE
SYNTAX INTEGER { ipv4(0), ipv6(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: ipv4
1: ipv6 "
::= { gs2326plusAccessMgtConfEntry 2 }
gs2326plusAccessMgtStartIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Start IP address.
IP address doesn't allowed all zero or all 'ff'H."
::= { gs2326plusAccessMgtConfEntry 3 }
gs2326plusAccessMgtEndIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" End IP address.
IP address doesn't allowed all zero or all 'ff'H.
End ip address is not less than start ip address."
::= { gs2326plusAccessMgtConfEntry 4 }
gs2326plusAccessMgtHttpHttps OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusAccessMgtConfEntry 5 }
gs2326plusAccessMgtSNMP OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusAccessMgtConfEntry 6 }
gs2326plusAccessMgtTelnetSSH OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable "
::= { gs2326plusAccessMgtConfEntry 7 }
gs2326plusAccessMgtRowStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), notInservice(2), edit(3),destroy(4), undo(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1: active
2: notInservice
3: edit
4: destroy
5: undo"
::= { gs2326plusAccessMgtConfEntry 8 }
gs2326plusAccessMgtStatistics OBJECT IDENTIFIER ::= { gs2326plusAccessManagement 2 }
gs2326plusHttpReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 1 }
gs2326plusHttpAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 2 }
gs2326plusHttpDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 3 }
gs2326plusHttpsReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 4 }
gs2326plusHttpsAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 5 }
gs2326plusHttpsDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 6 }
gs2326plusSnmpReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 7 }
gs2326plusSnmpAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 8 }
gs2326plusSnmpDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 9 }
gs2326plusTelnetReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 10 }
gs2326plusTelnetAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 11 }
gs2326plusTelnetDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 12 }
gs2326plusSSHReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 13 }
gs2326plusSSHAllowedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 14 }
gs2326plusSSHDiscardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { gs2326plusAccessMgtStatistics 15 }
gs2326plusAccessMgtStatisticsClearAll OBJECT-TYPE
SYNTAX INTEGER { none(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: none
1: clear"
::= { gs2326plusAccessMgtStatistics 16 }
gs2326plusSSH OBJECT IDENTIFIER ::= { gs2326plusSecurity 7 }
gs2326plusSSHMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: disable
1: enable"
::= { gs2326plusSSH 1 }
gs2326plusHTTPS OBJECT IDENTIFIER ::= { gs2326plusSecurity 8 }
gs2326plusHTTPSMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: disable
1: enable"
::= { gs2326plusHTTPS 1 }
gs2326plusHTTPSAutoRedirect OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0: disable
1: enable"
::= { gs2326plusHTTPS 2 }
gs2326plusHTTPSCertRenew OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), renew(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0 ,
0: doNothing
1: renew"
::= { gs2326plusHTTPS 3 }
gs2326plusHTTPSMinProtoVersion OBJECT-TYPE
SYNTAX INTEGER { SSLv3(0), TLSv1(1), TLSv11(2), TLSv12(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: SSLv3
1: TLSv1
2: TLSv1.1
3: TLSv1.2"
::= { gs2326plusHTTPS 4 }
gs2326plusHTTPMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: disable
1: enable"
::= { gs2326plusHTTPS 5 }
gs2326plusAuthMethod OBJECT IDENTIFIER ::= { gs2326plusSecurity 9 }
gs2326plusConsoleAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2326plusAuthMethod 1 }
gs2326plusConsoleFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2326plusAuthMethod 2 }
gs2326plusTelnetAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2326plusAuthMethod 3 }
gs2326plusTelnetFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2326plusAuthMethod 4 }
gs2326plusSshAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2326plusAuthMethod 5 }
gs2326plusSshFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2326plusAuthMethod 6 }
gs2326plusTftpAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2326plusAuthMethod 9 }
gs2326plusTftpFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2326plusAuthMethod 10 }
gs2326plusLoginFailures OBJECT-TYPE
SYNTAX Integer32(0..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When login failures mechanism is triggered,the lock minutes will prevent to login in this periods.
The value '0' should deactivate this feature.
range: 0-99.
default: 5."
::= { gs2326plusAuthMethod 11 }
gs2326plusLockMinutes OBJECT-TYPE
SYNTAX Integer32(1..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lock time to login failures trigger.
range: 1-99.
default: 5."
::= { gs2326plusAuthMethod 12 }
gs2326plusHttpAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2326plusAuthMethod 13 }
gs2326plusHttpFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2326plusAuthMethod 14 }
gs2326plusHttpsAuthMethod OBJECT-TYPE
SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 1
0: none
1: local
2: RADIUS
3: TACACS+"
::= { gs2326plusAuthMethod 15 }
gs2326plusHttpsFallback OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:disable
1:enable"
::= { gs2326plusAuthMethod 16 }
gs2326plusAAA OBJECT IDENTIFIER ::= { gs2326plusSecurity 10 }
gs2326plusAAACommonServer OBJECT IDENTIFIER ::= { gs2326plusAAA 1 }
gs2326plusAAACommonServerTimeout OBJECT-TYPE
SYNTAX Integer32(3..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Timeout, which can be set to a number between 3 and 3600 seconds, is
the maximum time to wait for a reply from a server. If the server does not
reply within this timeframe, we will consider it to be dead and continue
with the next enabled server (if any). RADIUS servers are using the UDP
protocol, which is unreliable by design. In order to cope with lost frames,
the timeout interval is divided into 3 subintervals of equal length. If a
reply is not received within the subinterval, the request is transmitted
again. This algorithm causes the RADIUS server to be queried up to 3 times
before it is considered to be dead.
default: 15."
::= { gs2326plusAAACommonServer 1 }
gs2326plusAAACommonServerDeadTime OBJECT-TYPE
SYNTAX Integer32(0..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dead Time, which can be set to a number between 0 and 3600 seconds,
is the period during which the switch will not send new requests to a
server that has failed to respond to a previous request. This will stop
the switch from continually trying to contact a server that it has already
determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature,
but only if more than one server has been configured.
default: 300."
::= { gs2326plusAAACommonServer 2 }
gs2326plusAAATACACSPlusAuthAndAccounting OBJECT IDENTIFIER ::= { gs2326plusAAA 2 }
gs2326plusAAAAuthorization OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authorization is the action of determining what a user is allowed to do.
An authorization request may indicate that the user is not authenticated.
In this case it is up to the authorization agent to determine if an
unauthenticated user is allowed the services in question. "
::= { gs2326plusAAATACACSPlusAuthAndAccounting 1 }
gs2326plusAAAFallbackToLocalAuthorization OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This function is an auxiliary function of Authorization. When the DUT
cannot communicate with TACACS+ Server normally, it will check the right/
permission level of the Local Account to execute the Authorization. "
::= { gs2326plusAAATACACSPlusAuthAndAccounting 2 }
gs2326plusAAAAccounting OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Accounting is typically the third action after authentication and
authorization. Accounting is the action of recording what a user is doing,
and/or has done. TACACS+ accounting records contain all the information
used in the authorization records and resource usage information. "
::= { gs2326plusAAATACACSPlusAuthAndAccounting 3 }
gs2326plusRADIUSAuthenticationServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusRADIUSAuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusAAA 3 }
gs2326plusRADIUSAuthenticationServerEntry OBJECT-TYPE
SYNTAX Gs2326plusRADIUSAuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusRADIUSAuthenticationServerIndex }
::= { gs2326plusRADIUSAuthenticationServerTable 1 }
Gs2326plusRADIUSAuthenticationServerEntry ::= SEQUENCE {
gs2326plusRADIUSAuthenticationServerIndex Integer32,
gs2326plusRADIUSAuthenticationServerEnable INTEGER,
gs2326plusRADIUSAuthenticationServerIP DisplayString,
gs2326plusRADIUSAuthenticationServerPort Integer32,
gs2326plusRADIUSAuthenticationServerSecret DisplayString
}
gs2326plusRADIUSAuthenticationServerIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RADIUS Authentication Server index
range : 1-5."
::= { gs2326plusRADIUSAuthenticationServerEntry 1 }
gs2326plusRADIUSAuthenticationServerEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the RADIUS Authentication Server. the RADIUSAuthenticationServerEnable
can be set, when IP and Secret have value "
::= { gs2326plusRADIUSAuthenticationServerEntry 2 }
gs2326plusRADIUSAuthenticationServerIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address or hostname of the RADIUS Authentication Server.
IP address is expressed in dotted decimal notation. "
::= { gs2326plusRADIUSAuthenticationServerEntry 3 }
gs2326plusRADIUSAuthenticationServerPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port to use on the RADIUS Authentication Server. If the port is
set to 0 (zero), the default port (1812) is used on the RADIUS Authentication Server. "
::= { gs2326plusRADIUSAuthenticationServerEntry 4 }
gs2326plusRADIUSAuthenticationServerSecret OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret - up to 64 characters long - shared between the RADIUS Authentication Server and the switch. "
::= { gs2326plusRADIUSAuthenticationServerEntry 5 }
gs2326plusRADIUSAccountingServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusRADIUSAccountingServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusAAA 4 }
gs2326plusRADIUSAccountingServerEntry OBJECT-TYPE
SYNTAX Gs2326plusRADIUSAccountingServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusRADIUSAccountingServerIndex }
::= { gs2326plusRADIUSAccountingServerTable 1 }
Gs2326plusRADIUSAccountingServerEntry ::= SEQUENCE {
gs2326plusRADIUSAccountingServerIndex Integer32,
gs2326plusRADIUSAccountingServerEnable INTEGER,
gs2326plusRADIUSAccountingServerIP DisplayString,
gs2326plusRADIUSAccountingServerPort Integer32,
gs2326plusRADIUSAccountingServerSecret DisplayString
}
gs2326plusRADIUSAccountingServerIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RADIUS Accounting Server index
range : 1-5."
::= { gs2326plusRADIUSAccountingServerEntry 1 }
gs2326plusRADIUSAccountingServerEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the RADIUS Accounting Server. The RADIUSAccountingServerEnable
can be set, when IP and Secret have value. "
::= { gs2326plusRADIUSAccountingServerEntry 2 }
gs2326plusRADIUSAccountingServerIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address or hostname of the RADIUS Accounting Server.
IP address is expressed in dotted decimal notation. "
::= { gs2326plusRADIUSAccountingServerEntry 3 }
gs2326plusRADIUSAccountingServerPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port to use on the RADIUS Accounting Server. If the port is
set to 0 (zero), the default port (1812) is used on the RADIUS Accounting Server. "
::= { gs2326plusRADIUSAccountingServerEntry 4 }
gs2326plusRADIUSAccountingServerSecret OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret - up to 64 characters long - shared between the RADIUS Accounting Server and the switch. "
::= { gs2326plusRADIUSAccountingServerEntry 5 }
gs2326plusTACACSPlusAuthenticationServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusTACACSPlusAuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusAAA 5 }
gs2326plusTACACSPlusAuthenticationServerEntry OBJECT-TYPE
SYNTAX Gs2326plusTACACSPlusAuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusTACACSPlusAuthenticationServerIndex }
::= { gs2326plusTACACSPlusAuthenticationServerTable 1 }
Gs2326plusTACACSPlusAuthenticationServerEntry ::= SEQUENCE {
gs2326plusTACACSPlusAuthenticationServerIndex Integer32,
gs2326plusTACACSPlusAuthenticationServerEnable INTEGER,
gs2326plusTACACSPlusAuthenticationServerIP DisplayString,
gs2326plusTACACSPlusAuthenticationServerPort Integer32,
gs2326plusTACACSPlusAuthenticationServerSecret DisplayString
}
gs2326plusTACACSPlusAuthenticationServerIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TACACSPlus Authentication Server index
range : 1-5."
::= { gs2326plusTACACSPlusAuthenticationServerEntry 1 }
gs2326plusTACACSPlusAuthenticationServerEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the TACACSPlus Authentication Server. The
TACACSPlusAuthenticationServerEnable can be set, when IP and Secret have
value."
::= { gs2326plusTACACSPlusAuthenticationServerEntry 2 }
gs2326plusTACACSPlusAuthenticationServerIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address or hostname of the TACACSPlus Authentication Server.
IP address is expressed in dotted decimal notation. "
::= { gs2326plusTACACSPlusAuthenticationServerEntry 3 }
gs2326plusTACACSPlusAuthenticationServerPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port to use on the TACACSPlus Authentication Server. If the
port is set to 0 (zero), the default port (1812) is used on the
TACACSPlus Authentication Server. "
::= { gs2326plusTACACSPlusAuthenticationServerEntry 4 }
gs2326plusTACACSPlusAuthenticationServerSecret OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret - up to 64 characters long - shared between the TACACSPlus Authentication Server and the switch. "
::= { gs2326plusTACACSPlusAuthenticationServerEntry 5 }
gs2326plusRADIUSStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusRADIUSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusAAA 6 }
gs2326plusRADIUSStatisticsEntry OBJECT-TYPE
SYNTAX Gs2326plusRADIUSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusRADIUSAuthStatisticsServerIndex }
::= { gs2326plusRADIUSStatisticsTable 1 }
Gs2326plusRADIUSStatisticsEntry ::= SEQUENCE {
gs2326plusRADIUSAuthStatisticsServerIndex Integer32,
gs2326plusRADIUSAuthStatisticsRecPktAccessAccepts Counter32,
gs2326plusRADIUSAuthStatisticsRecPktAccessRejects Counter32,
gs2326plusRADIUSAuthStatisticsRecPktAccessChallenges Counter32,
gs2326plusRADIUSAuthStatisticsRecPktMalformedAccResponses Counter32,
gs2326plusRADIUSAuthStatisticsRecPktBadAuthenticators Counter32,
gs2326plusRADIUSAuthStatisticsRecPktUnknownTypes Counter32,
gs2326plusRADIUSAuthStatisticsRecPktDropped Counter32,
gs2326plusRADIUSAuthStatisticsTransmitPktAccessRequests Counter32,
gs2326plusRADIUSAuthStatisticsTransmitPktAccessRetransmissions Counter32,
gs2326plusRADIUSAuthStatisticsTransmitPktPendingRequests Counter32,
gs2326plusRADIUSAuthStatisticsTransmitPktTimeouts Counter32,
gs2326plusRADIUSAuthIP DisplayString,
gs2326plusRADIUSAuthState DisplayString,
gs2326plusRADIUSAuthRoundTripTime DisplayString,
gs2326plusRADIUSAccountingStatisticsRecPktResponses Counter32,
gs2326plusRADIUSAccountingStatisticsRecPktMalformedResponses Counter32,
gs2326plusRADIUSAccountingStatisticsRecPktBadAuthenticators Counter32,
gs2326plusRADIUSAccountingStatisticsRecPktUnknownTypes Counter32,
gs2326plusRADIUSAccountingStatisticsRecPktDropped Counter32,
gs2326plusRADIUSAccountingStatisticsTransmitPktRequests Counter32,
gs2326plusRADIUSAccountingStatisticsTransmitPktRetransmissions Counter32,
gs2326plusRADIUSAccountingStatisticsTransmitPktPendingRequests Counter32,
gs2326plusRADIUSAccountingStatisticsTransmitPktTimeouts Counter32,
gs2326plusRADIUSAccountingIP DisplayString,
gs2326plusRADIUSAccountingState DisplayString,
gs2326plusRADIUSAccountingRoundTripTime DisplayString,
gs2326plusRADIUSStatisticsClear INTEGER
}
gs2326plusRADIUSAuthStatisticsServerIndex OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RADIUS Authentication Server index
range : 1-5."
::= { gs2326plusRADIUSStatisticsEntry 1 }
gs2326plusRADIUSAuthStatisticsRecPktAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Accept packets (valid or invalid) received from the server."
::= { gs2326plusRADIUSStatisticsEntry 2 }
gs2326plusRADIUSAuthStatisticsRecPktAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Reject packets (valid or invalid) received from the server."
::= { gs2326plusRADIUSStatisticsEntry 3 }
gs2326plusRADIUSAuthStatisticsRecPktAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Challenge packets (valid or invalid) received from the server. "
::= { gs2326plusRADIUSStatisticsEntry 4 }
gs2326plusRADIUSAuthStatisticsRecPktMalformedAccResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Access-Response packets received from the
server. Malformed packets include packets with an invalid length. Bad
authenticators or Message Authenticator attributes or unknown types are
not included as malformed access responses. "
::= { gs2326plusRADIUSStatisticsEntry 5 }
gs2326plusRADIUSAuthStatisticsRecPktBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Response packets containing invalid
authenticators or Message Authenticator attributes received from the server."
::= { gs2326plusRADIUSStatisticsEntry 6 }
gs2326plusRADIUSAuthStatisticsRecPktUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets that were received with unknown types from
the server on the authentication port and dropped."
::= { gs2326plusRADIUSStatisticsEntry 7 }
gs2326plusRADIUSAuthStatisticsRecPktDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets that were received from the server on the
authentication port and dropped for some other reason."
::= { gs2326plusRADIUSStatisticsEntry 8 }
gs2326plusRADIUSAuthStatisticsTransmitPktAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets sent to the server. This
does not include retransmissions."
::= { gs2326plusRADIUSStatisticsEntry 9 }
gs2326plusRADIUSAuthStatisticsTransmitPktAccessRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets retransmitted to the RADIUS
authentication server."
::= { gs2326plusRADIUSStatisticsEntry 10 }
gs2326plusRADIUSAuthStatisticsTransmitPktPendingRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets destined for the server that
have not yet timed out or received a response. This variable is
incremented when an Access-Request is sent and decremented due to
receipt of an Access-Accept, Access-Reject, Access-Challenge, timeout,
or retransmission. "
::= { gs2326plusRADIUSStatisticsEntry 11 }
gs2326plusRADIUSAuthStatisticsTransmitPktTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication timeouts to the server. After a timeout,
the client may retry to the same server, send to a different server, or
give up. A retry to the same server is counted as a retransmit as well as
a timeout. A send to a different server is counted as a Request as well
as a timeout. "
::= { gs2326plusRADIUSStatisticsEntry 12 }
gs2326plusRADIUSAuthIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address and UDP port for the authentication server in question."
::= { gs2326plusRADIUSStatisticsEntry 13 }
gs2326plusRADIUSAuthState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not
reply within the configured timeout. The server has temporarily been disabled,
but will get re-enabled when the dead-time expires. The number of seconds left
before this occurs is displayed in parentheses. This state is only reachable
when more than one server is enabled. "
::= { gs2326plusRADIUSStatisticsEntry 14 }
gs2326plusRADIUSAuthRoundTripTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval (measured in milliseconds) between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it from
the RADIUS authentication server. The granularity of this measurement is
100 ms. A value of 0 ms indicates that there hasn't been round-trip
communication with the server yet. "
::= { gs2326plusRADIUSStatisticsEntry 15 }
gs2326plusRADIUSAccountingStatisticsRecPktResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets (valid or invalid) received from the server."
::= { gs2326plusRADIUSStatisticsEntry 16 }
gs2326plusRADIUSAccountingStatisticsRecPktMalformedResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS packets received from the server.
Malformed packets include packets with an invalid length. Bad
authenticators or unknown types are not included as malformed access
responses. "
::= { gs2326plusRADIUSStatisticsEntry 17 }
gs2326plusRADIUSAccountingStatisticsRecPktBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets containing invalid authenticators received
from the server."
::= { gs2326plusRADIUSStatisticsEntry 18 }
gs2326plusRADIUSAccountingStatisticsRecPktUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown types that were received from
the server on the accounting port."
::= { gs2326plusRADIUSStatisticsEntry 19 }
gs2326plusRADIUSAccountingStatisticsRecPktDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets that were received from the server on the
accounting port and dropped for some other reason."
::= { gs2326plusRADIUSStatisticsEntry 20 }
gs2326plusRADIUSAccountingStatisticsTransmitPktRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets sent to the server. This does not include
retransmissions."
::= { gs2326plusRADIUSStatisticsEntry 21 }
gs2326plusRADIUSAccountingStatisticsTransmitPktRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets retransmitted to the RADIUS accounting server."
::= { gs2326plusRADIUSStatisticsEntry 22 }
gs2326plusRADIUSAccountingStatisticsTransmitPktPendingRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets destined for the server that have not yet
timed out or received a response. This variable is incremented when a
Request is sent and decremented due to receipt of a Response, timeout,
or retransmission. "
::= { gs2326plusRADIUSStatisticsEntry 23 }
gs2326plusRADIUSAccountingStatisticsTransmitPktTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of accounting timeouts to the server. After a timeout, the
client may retry to the same server, send to a different server, or give
up. A retry to the same server is counted as a retransmit as well as a
timeout. A send to a different server is counted as a Request as well as
a timeout. "
::= { gs2326plusRADIUSStatisticsEntry 24 }
gs2326plusRADIUSAccountingIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address and UDP port for the accounting server in question."
::= { gs2326plusRADIUSStatisticsEntry 25 }
gs2326plusRADIUSAccountingState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did
not reply within the configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time expires. The number of
seconds left before this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled. "
::= { gs2326plusRADIUSStatisticsEntry 26 }
gs2326plusRADIUSAccountingRoundTripTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval (measured in milliseconds) between the most recent
Response and the Request that matched it from the RADIUS accounting
server. The granularity of this measurement is 100 ms. A value of 0 ms
indicates that there hasn't been round-trip communication with the server
yet. "
::= { gs2326plusRADIUSStatisticsEntry 27 }
gs2326plusRADIUSStatisticsClear OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears the counters for the server.
read: always 0
clear: set 1"
::= { gs2326plusRADIUSStatisticsEntry 28 }
gs2326plusNAS OBJECT IDENTIFIER ::= { gs2326plusSecurity 11 }
gs2326plusNASConfiguration OBJECT IDENTIFIER ::= { gs2326plusNAS 1 }
gs2326plusNASConfigMode OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if NAS is globally enabled or disabled on the switch.
If globally disabled, all ports are allowed forwarding of frames."
::= { gs2326plusNASConfiguration 1 }
gs2326plusNASConfigReauthEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If checked, successfully authenticated supplicants/clients are
reauthenticated after the interval specified by the Reauthentication
Period. Reauthentication for 802.1X-enabled ports can be used to
detect if a new device is plugged into a switch port or if a
supplicant is no longer attached.
For MAC-based ports, reauthentication is only useful if the RADIUS
server configuration has changed. It does not involve communication
between the switch and the client, and therefore doesn't imply that
a client is still present on a port."
::= { gs2326plusNASConfiguration 2 }
gs2326plusNASConfigReauthPeriod OBJECT-TYPE
SYNTAX Integer32(1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the period, in seconds, after which a connected client must
be reauthenticated. This is only active if the Reauthentication Enabled
checkbox is checked.
range: 1 - 3600 seconds."
::= { gs2326plusNASConfiguration 3 }
gs2326plusNASConfigEAPOLTimeout OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the time for retransmission of Request Identity EAPOL frames.
This has no effect for MAC-based ports.
range: 1 - 65535 seconds."
::= { gs2326plusNASConfiguration 4 }
gs2326plusNASConfigAgingPeriod OBJECT-TYPE
SYNTAX Integer32(10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the NAS module uses the Port Security module to secure MAC addresses,
the Port Security module needs to check for activity on the MAC address
in question at regular intervals and free resources if no activity
is seen within a given period of time.
Admin State supported : Single, Multi and MAC-Based Auth. 802.1X.
range: 10 - 1000000 seconds."
::= { gs2326plusNASConfiguration 5 }
gs2326plusNASConfigHoldTime OBJECT-TYPE
SYNTAX Integer32(10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a client is denied access - either because the RADIUS server denies
the client access or because the RADIUS server request times out
- the client is put on hold in the Unauthorized state. The hold timer
does not count during an on-going authentication. In MAC-based Auth.
mode, the switch will ignore new frames coming from the client during
the hold time.
Admin State supported : Single, Multi and MAC-Based Auth. 802.1X.
range: 10 - 1000000 seconds."
::= { gs2326plusNASConfiguration 6 }
gs2326plusNASConfigRADIUSAssignedQoSEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS-assigned QoS provides a means to centrally control the
traffic class to which traffic coming from a successfully authenticated
supplicant is assigned on the switch. The RADIUS server must be configured
to transmit special RADIUS attributes to take advantage of this feature."
::= { gs2326plusNASConfiguration 7 }
gs2326plusNASConfigRADIUSAssignedVLANEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS-assigned VLAN provides a means to centrally control the VLAN on
which a successfully authenticated supplicant is placed on the switch.
Incoming traffic will be classified to and switched on the RADIUS-assigned
VLAN. The RADIUS server must be configured to transmit special RADIUS
attributes to take advantage of this feature.When enable, the individual
ports' ditto setting determine whether RADIUS-assigned VLAN is enabled
on that port. When disable, RADIUS-server assigned VLAN is disabled on
all ports. "
::= { gs2326plusNASConfiguration 8 }
gs2326plusNASConfigGuestVLANEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Guest VLAN is a special VLAN - typically with limited network access -
on which 802.1X-unaware clients are placed after a network administrator-defined
timeout. The switch follows a set of rules for entering and leaving the Guest
VLAN as listed below.When enable, the individual ports' ditto setting determines
whether the port can be moved into Guest VLAN. When disable, the ability to
move to the Guest VLAN is disabled on all ports. "
::= { gs2326plusNASConfiguration 9 }
gs2326plusNASConfigGuestVLANID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the value that a port's Port VLAN ID is set to if a port is moved into
the Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled.
range: 1 - 4094."
::= { gs2326plusNASConfiguration 10 }
gs2326plusNASConfigMaxReauthCount OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times the switch transmits an EAPOL Request Identity frame without
response before considering entering the Guest VLAN is adjusted with this setting.
The value can only be changed if the Guest VLAN option is globally enabled.
range: 1 - 255."
::= { gs2326plusNASConfiguration 11 }
gs2326plusNASConfigAllowGuestVLANEAPOLSeen OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch remembers if an EAPOL frame has been received on the port for the
life-time of the port. Once the switch considers whether to enter the Guest VLAN,
it will first check if this option is enabled or disabled. If disabled, the switch
will only enter the Guest VLAN if an EAPOL frame has not been received on the port
for the life-time of the port. If enabled (checked), the switch will consider
entering the Guest VLAN even if an EAPOL frame has been received on the port for
the life-time of the port.The value can only be changed if the Guest VLAN option
is globally enabled."
::= { gs2326plusNASConfiguration 12 }
gs2326plusNASConfigMacBasedUseEAP OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch can do the RADIUS authentication on behalf of the client in the
MAC-based Auth. port authentication mode. It can either present itself as a
normal 802.1X client to the RADIUS Server and use EAP, supporting only the
MD5-Challenge, or alternativly can use plain RADIUS with username / passwort
authentification without EAP if this setting is disabled."
::= { gs2326plusNASConfiguration 101 }
gs2326plusNASPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusNASPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2326plusNASConfiguration 13 }
gs2326plusNASPortConfigEntry OBJECT-TYPE
SYNTAX Gs2326plusNASPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusNASPortConfigPort }
::= { gs2326plusNASPortConfigTable 1 }
Gs2326plusNASPortConfigEntry ::= SEQUENCE {
gs2326plusNASPortConfigPort Integer32,
gs2326plusNASPortConfigAdminState INTEGER,
gs2326plusNASPortConfigRADIUSAssignedQoSEnabled INTEGER,
gs2326plusNASPortConfigRADIUSAssignedVLANEnabled INTEGER,
gs2326plusNASPortConfigGuestVLANEnabled INTEGER,
gs2326plusNASPortConfigFallbackEnabled INTEGER,
gs2326plusNASPortConfigPortState DisplayString,
gs2326plusNASPortConfigReauthenticate INTEGER,
gs2326plusNASPortConfigReinitialize INTEGER
}
gs2326plusNASPortConfigPort OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" port, range : 1 - port number. "
::= { gs2326plusNASPortConfigEntry 1 }
gs2326plusNASPortConfigAdminState OBJECT-TYPE
SYNTAX INTEGER{ forceAuthorized(1),
forceUnauthorized(2),
portBased(3),
single(4),
multi(5),
macBased(6),
macBasedSingle(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This selection controls the port's authentication mode.
1: Force Authorized,
2: Force Unauthorized,
3: Port-based 802.1X,
4: Single 802.1X,
5: Multi 802.1X,
6: MAC-based Auth,
7: MAC-based Single Auth."
::= { gs2326plusNASPortConfigEntry 2 }
gs2326plusNASPortConfigRADIUSAssignedQoSEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When RADIUS-Assigned QoS is both globally enabled and enabled (checked)
on a given port, the switch reacts to QoS Class information carried in
the RADIUS Access-Accept packet transmitted by the RADIUS server when a
supplicant is successfully authenticated. If present and valid, traffic
received on the supplicant's port will be classified to the given QoS Class.
Admin State supported : Port-based and Single 802.1X and MAC-based Single Auth."
::= { gs2326plusNASPortConfigEntry 3 }
gs2326plusNASPortConfigRADIUSAssignedVLANEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When RADIUS-Assigned VLAN is both globally enabled and enabled (checked)
for a given port, the switch reacts to VLAN ID information carried in the
RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant
is successfully authenticated. If present and valid, the port's Port VLAN ID
will be changed to this VLAN ID, the port will be set to be a member of that
VLAN ID, and the port will be forced into VLAN unaware mode. Once assigned,
all traffic arriving on the port will be classified and switched on the
RADIUS-assigned VLAN ID.
Admin State supported : Port-based and Single 802.1X and MAC-based Single Auth."
::= { gs2326plusNASPortConfigEntry 4 }
gs2326plusNASPortConfigGuestVLANEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When Guest VLAN is both globally enabled and enabled (checked) for a given port,
the switch considers moving the port into the Guest VLAN according to the rules
outlined below.
Admin State supported : Port-based , Single and Multi 802.1X."
::= { gs2326plusNASPortConfigEntry 5 }
gs2326plusNASPortConfigPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Globally Disabled: NAS is globally disabled.
Link Down: NAS is globally enabled, but there is no link on the port.
Authorized: The port is in Force Authorized or a single-supplicant mode
and the supplicant is authorized.
Unauthorized: The port is in Force Unauthorized or a single-supplicant
mode and the supplicant is not successfully authorized by the RADIUS server.
X Auth/Y Unauth: The port is in a multi-supplicant mode. Currently X clients
are authorized and Y are unauthorized."
::= { gs2326plusNASPortConfigEntry 6 }
gs2326plusNASPortConfigReauthenticate OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Schedules a reauthentication whenever the quiet-period of the port runs out
(EAPOL-based authentication). For MAC-based authentication, reauthentication
will be attempted immediately.The button only has effect for successfully
authenticated clients on the port and will not cause the clients to get
temporarily unauthorized."
::= { gs2326plusNASPortConfigEntry 7 }
gs2326plusNASPortConfigReinitialize OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forces a reinitialization of the clients on the port and thereby a reauthentication
immediately. The clients will transfer to the unauthorized state while the
reauthentication is in progress."
::= { gs2326plusNASPortConfigEntry 8 }
gs2326plusNASPortConfigFallbackEnabled OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When Fallback is enabled, the switch will take over the supplicants role
after max reauthentication count is reached and tries to authenticate the
client on its behalf as described for MAC-based Auth.
Admin State supported : Single and Multi 802.1X."
::= { gs2326plusNASPortConfigEntry 101 }
gs2326plusNASSwitchStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusNASSwitchStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2326plusNAS 2 }
gs2326plusNASSwitchStatusEntry OBJECT-TYPE
SYNTAX Gs2326plusNASSwitchStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusNASPortConfigPort }
::= { gs2326plusNASSwitchStatusTable 1 }
Gs2326plusNASSwitchStatusEntry ::= SEQUENCE {
gs2326plusNASSwitchStatusAdminState DisplayString,
gs2326plusNASSwitchStatusPortState DisplayString,
gs2326plusNASSwitchStatusLastSource DisplayString,
gs2326plusNASSwitchStatusLastID DisplayString,
gs2326plusNASSwitchStatusQoSClass DisplayString,
gs2326plusNASSwitchStatusPortVlanID DisplayString
}
gs2326plusNASSwitchStatusAdminState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current administrative state. Refer to NAS Admin State for a description of possible values."
::= { gs2326plusNASSwitchStatusEntry 2 }
gs2326plusNASSwitchStatusPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the port. Refer to NAS Port State for a description of the individual states."
::= { gs2326plusNASSwitchStatusEntry 3 }
gs2326plusNASSwitchStatusLastSource OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication,
and the most recently received frame from a new client for MAC-based authentication."
::= { gs2326plusNASSwitchStatusEntry 4 }
gs2326plusNASSwitchStatusLastID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame
for EAPOL-based authentication, and the source MAC address from the most recently received frame from a
new client for MAC-based authentication."
::= { gs2326plusNASSwitchStatusEntry 5 }
gs2326plusNASSwitchStatusQoSClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QoS Class assigned to the port by the RADIUS server if enabled."
::= { gs2326plusNASSwitchStatusEntry 6 }
gs2326plusNASSwitchStatusPortVlanID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not overridden by NAS."
::= { gs2326plusNASSwitchStatusEntry 7 }
gs2326plusNASPortStatus OBJECT IDENTIFIER ::= { gs2326plusNAS 3 }
gs2326plusNASPortStatusCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusNASPortStatusCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2326plusNASPortStatus 1 }
gs2326plusNASPortStatusCountersEntry OBJECT-TYPE
SYNTAX Gs2326plusNASPortStatusCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusNASPortConfigPort }
::= { gs2326plusNASPortStatusCountersTable 1 }
Gs2326plusNASPortStatusCountersEntry ::= SEQUENCE {
gs2326plusNASRxCountersEAPOLTotal Counter32,
gs2326plusNASRxCountersEAPOLResponseID Counter32,
gs2326plusNASRxCountersEAPOLResponses Counter32,
gs2326plusNASRxCountersEAPOLStart Counter32,
gs2326plusNASRxCountersEAPOLLogoff Counter32,
gs2326plusNASRxCountersEAPOLInvalidType Counter32,
gs2326plusNASRxCountersEAPOLInvalidLength Counter32,
gs2326plusNASTxCountersEAPOLTotal Counter32,
gs2326plusNASTxCountersEAPOLRequestID Counter32,
gs2326plusNASTxCountersEAPOLRequests Counter32,
gs2326plusNASRxBackendServerCountersAccessChallenges Counter32,
gs2326plusNASRxBackendServerCountersOtherRequests Counter32,
gs2326plusNASRxBackendServerCountersAuthSuccesses Counter32,
gs2326plusNASRxBackendServerCountersAuthFailures Counter32,
gs2326plusNASTxBackendServerCountersResponses Counter32,
gs2326plusNASLastSupplicantInfoMACAddress DisplayString,
gs2326plusNASLastSupplicantInfoVlanID Integer32,
gs2326plusNASLastSupplicantInfoVersion Integer32,
gs2326plusNASLastSupplicantInfoIdentity DisplayString,
gs2326plusNASCountersDoClear INTEGER
}
gs2326plusNASRxCountersEAPOLTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL frames of any type that have been received by the switch."
::= { gs2326plusNASPortStatusCountersEntry 2 }
gs2326plusNASRxCountersEAPOLResponseID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Response Identity frames that have been received by the switch."
::= { gs2326plusNASPortStatusCountersEntry 3 }
gs2326plusNASRxCountersEAPOLResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL response frames (other than Response Identity frames)
that have been received by the switch."
::= { gs2326plusNASPortStatusCountersEntry 4 }
gs2326plusNASRxCountersEAPOLStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Start frames that have been received by the switch."
::= { gs2326plusNASPortStatusCountersEntry 5 }
gs2326plusNASRxCountersEAPOLLogoff OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Logoff frames that have been received by the switch."
::= { gs2326plusNASPortStatusCountersEntry 6 }
gs2326plusNASRxCountersEAPOLInvalidType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received by the switch in which
the frame type is not recognized."
::= { gs2326plusNASPortStatusCountersEntry 7 }
gs2326plusNASRxCountersEAPOLInvalidLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received by the switch in which the
Packet Body Length field is invalid."
::= { gs2326plusNASPortStatusCountersEntry 8 }
gs2326plusNASTxCountersEAPOLTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames of any type that have been transmitted by the switch."
::= { gs2326plusNASPortStatusCountersEntry 9 }
gs2326plusNASTxCountersEAPOLRequestID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Request Identity frames that have been transmitted by the switch."
::= { gs2326plusNASPortStatusCountersEntry 10 }
gs2326plusNASTxCountersEAPOLRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Request frames (other than Request Identity frames)
that have been transmitted by the switch."
::= { gs2326plusNASPortStatusCountersEntry 11 }
gs2326plusNASRxBackendServerCountersAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch receives the first request
from the backend server following the first response from the supplicant.
MAC-based: Counts all Access Challenges received from the backend server for this
port or client."
::= { gs2326plusNASPortStatusCountersEntry 12 }
gs2326plusNASRxBackendServerCountersOtherRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch sends an EAP Request
packet following the first to the supplicant.
MAC-based: Not applicable."
::= { gs2326plusNASPortStatusCountersEntry 13 }
gs2326plusNASRxBackendServerCountersAuthSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the switch receives a success indication.
Indicates that the supplicant/client has successfully authenticated to the
backend server."
::= { gs2326plusNASPortStatusCountersEntry 14 }
gs2326plusNASRxBackendServerCountersAuthFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the switch receives a failure message.
This indicates that the supplicant/client has not authenticated to the
backend server. "
::= { gs2326plusNASPortStatusCountersEntry 15 }
gs2326plusNASTxBackendServerCountersResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch attempts to
send a supplicant's first response packet to the backend server. Indicates
the switch attempted communication with the backend server. Possible
retransmissions are not counted.
MAC-based: Counts all the backend server packets sent from the switch
towards the backend server for a given port or client. Possible
retransmissions are not counted."
::= { gs2326plusNASPortStatusCountersEntry 16 }
gs2326plusNASLastSupplicantInfoMACAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the last supplicant/client."
::= { gs2326plusNASPortStatusCountersEntry 17 }
gs2326plusNASLastSupplicantInfoVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID on which the last frame from the last supplicant/client was received."
::= { gs2326plusNASPortStatusCountersEntry 18 }
gs2326plusNASLastSupplicantInfoVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: The protocol version number carried in the most recently
received EAPOL frame.
MAC-based: Not applicable."
::= { gs2326plusNASPortStatusCountersEntry 19 }
gs2326plusNASLastSupplicantInfoIdentity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: The user name (supplicant identity) carried in the most recently received
Response Identity EAPOL frame.
MAC-based: Not applicable."
::= { gs2326plusNASPortStatusCountersEntry 20 }
gs2326plusNASCountersDoClear OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the counters for the selected port."
::= { gs2326plusNASPortStatusCountersEntry 21 }
gs2326plusNASPortStatusClientsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusNASPortStatusClientsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gs2326plusNASPortStatus 2 }
gs2326plusNASPortStatusClientsEntry OBJECT-TYPE
SYNTAX Gs2326plusNASPortStatusClientsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusNASPortConfigPort,
gs2326plusNASClientsIndex}
::= { gs2326plusNASPortStatusClientsTable 1 }
Gs2326plusNASPortStatusClientsEntry ::= SEQUENCE {
gs2326plusNASClientsIndex Integer32,
gs2326plusNASClientsIdentity DisplayString,
gs2326plusNASClientsMACAddress DisplayString,
gs2326plusNASClientsVlanID Integer32,
gs2326plusNASClientsState DisplayString,
gs2326plusNASClientsLastAuth DisplayString,
gs2326plusNASRxClientsEAPOLTotal Counter32,
gs2326plusNASRxClientsEAPOLResponseID Counter32,
gs2326plusNASRxClientsEAPOLResponses Counter32,
gs2326plusNASRxClientsEAPOLStart Counter32,
gs2326plusNASRxClientsEAPOLLogoff Counter32,
gs2326plusNASRxClientsEAPOLInvalidType Counter32,
gs2326plusNASRxClientsEAPOLInvalidLength Counter32,
gs2326plusNASTxClientsEAPOLTotal Counter32,
gs2326plusNASTxClientsEAPOLRequestID Counter32,
gs2326plusNASTxClientsEAPOLRequests Counter32,
gs2326plusNASRxBackendServerClientsAccessChallenges Counter32,
gs2326plusNASRxBackendServerClientsOtherRequests Counter32,
gs2326plusNASRxBackendServerClientsAuthSuccesses Counter32,
gs2326plusNASRxBackendServerClientsAuthFailures Counter32,
gs2326plusNASTxBackendServerClientsResponses Counter32
}
gs2326plusNASClientsIndex OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of client table in the port."
::= { gs2326plusNASPortStatusClientsEntry 1 }
gs2326plusNASClientsIdentity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the identity of the supplicant, as received in the Response Identity
EAPOL frame.This isn't available for MAC-based Auth."
::= { gs2326plusNASPortStatusClientsEntry 2 }
gs2326plusNASClientsMACAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multi 802.1X, this column holds the MAC address of the attached supplicant.
MAC-based Auth., this column holds the MAC address of the attached client."
::= { gs2326plusNASPortStatusClientsEntry 3 }
gs2326plusNASClientsVlanID OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This column holds the VLAN ID that the corresponding client is currently
secured through the Port Security module."
::= { gs2326plusNASPortStatusClientsEntry 4 }
gs2326plusNASClientsState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client can either be authenticated or unauthenticated. In the authenticated
state, it is allowed to forward frames on the port, and in the unauthenticated
state, it is blocked."
::= { gs2326plusNASPortStatusClientsEntry 5 }
gs2326plusNASClientsLastAuth OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the date and time of the last authentication of the client."
::= { gs2326plusNASPortStatusClientsEntry 6 }
gs2326plusNASRxClientsEAPOLTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL frames of any type that have been received by the switch."
::= { gs2326plusNASPortStatusClientsEntry 7 }
gs2326plusNASRxClientsEAPOLResponseID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Response Identity frames that have been received by the switch."
::= { gs2326plusNASPortStatusClientsEntry 8 }
gs2326plusNASRxClientsEAPOLResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL response frames (other than Response Identity frames)
that have been received by the switch."
::= { gs2326plusNASPortStatusClientsEntry 9 }
gs2326plusNASRxClientsEAPOLStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Start frames that have been received by the switch."
::= { gs2326plusNASPortStatusClientsEntry 10 }
gs2326plusNASRxClientsEAPOLLogoff OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Logoff frames that have been received by the switch."
::= { gs2326plusNASPortStatusClientsEntry 11 }
gs2326plusNASRxClientsEAPOLInvalidType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received by the switch in which
the frame type is not recognized."
::= { gs2326plusNASPortStatusClientsEntry 12 }
gs2326plusNASRxClientsEAPOLInvalidLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received by the switch in which the
Packet Body Length field is invalid."
::= { gs2326plusNASPortStatusClientsEntry 13 }
gs2326plusNASTxClientsEAPOLTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames of any type that have been transmitted by the switch."
::= { gs2326plusNASPortStatusClientsEntry 14 }
gs2326plusNASTxClientsEAPOLRequestID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Request Identity frames that have been transmitted by the switch."
::= { gs2326plusNASPortStatusClientsEntry 15 }
gs2326plusNASTxClientsEAPOLRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL Request frames (other than Request Identity frames)
that have been transmitted by the switch."
::= { gs2326plusNASPortStatusClientsEntry 16 }
gs2326plusNASRxBackendServerClientsAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch receives the first request
from the backend server following the first response from the supplicant.
MAC-based: Counts all Access Challenges received from the backend server for this
port or client."
::= { gs2326plusNASPortStatusClientsEntry 17 }
gs2326plusNASRxBackendServerClientsOtherRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch sends an EAP Request
packet following the first to the supplicant.
MAC-based: Not applicable."
::= { gs2326plusNASPortStatusClientsEntry 18 }
gs2326plusNASRxBackendServerClientsAuthSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the switch receives a success indication.
Indicates that the supplicant/client has successfully authenticated to the
backend server."
::= { gs2326plusNASPortStatusClientsEntry 19 }
gs2326plusNASRxBackendServerClientsAuthFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the switch receives a failure message.
This indicates that the supplicant/client has not authenticated to the
backend server. "
::= { gs2326plusNASPortStatusClientsEntry 20 }
gs2326plusNASTxBackendServerClientsResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.1X-based: Counts the number of times that the switch attempts to
send a supplicant's first response packet to the backend server. Indicates
the switch attempted communication with the backend server. Possible
retransmissions are not counted.
MAC-based: Counts all the backend server packets sent from the switch
towards the backend server for a given port or client. Possible
retransmissions are not counted."
::= { gs2326plusNASPortStatusClientsEntry 21 }
gs2326plusMaintenance OBJECT IDENTIFIER ::= { lancomGS2326plus 4 }
gs2326plusRestartDevice OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2326plusMaintenance 1 }
gs2326plusColdRestartDevice OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2326plusMaintenance 1500 }
gs2326plusFirmware OBJECT IDENTIFIER ::= { gs2326plusMaintenance 2 }
gs2326plusFirmwareIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the firmware tftp server."
::= { gs2326plusFirmware 1 }
gs2326plusFirmwareFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the path and filename for firmware upgrading."
::= { gs2326plusFirmware 2 }
gs2326plusDoFirmwareUpgrade OBJECT-TYPE
SYNTAX INTEGER { doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do firmware upgrade. Get this OID always return zero.
1 - do firmware upgrade.
0 - do nothing."
::= { gs2326plusFirmware 3 }
gs2326plusSaveOrRestore OBJECT IDENTIFIER ::= { gs2326plusMaintenance 3 }
gs2326plusFactoryDefaults OBJECT-TYPE
SYNTAX INTEGER { none(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2326plusSaveOrRestore 1 }
gs2326plusSaveStart OBJECT-TYPE
SYNTAX INTEGER { none(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2326plusSaveOrRestore 2 }
gs2326plusSaveUser OBJECT-TYPE
SYNTAX INTEGER { none(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2326plusSaveOrRestore 3 }
gs2326plusRestoreUser OBJECT-TYPE
SYNTAX INTEGER { none(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default: 0
0:none
1:yes"
::= { gs2326plusSaveOrRestore 4 }
gs2326plusExportOrImport OBJECT IDENTIFIER ::= { gs2326plusMaintenance 4 }
gs2326plusExportIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the export tftp server."
::= { gs2326plusExportOrImport 1 }
gs2326plusExportConfigName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the export file path and name."
::= { gs2326plusExportOrImport 2 }
gs2326plusDoExportConfig OBJECT-TYPE
SYNTAX INTEGER{ doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do export-config.
Get this OID always return zero.
1 - export."
::= { gs2326plusExportOrImport 3 }
gs2326plusImportIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the import tftp server."
::= { gs2326plusExportOrImport 4 }
gs2326plusImportConfigName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the import file path and name."
::= { gs2326plusExportOrImport 5 }
gs2326plusDoImportConfig OBJECT-TYPE
SYNTAX INTEGER{ doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do export-config.
Get this OID always return zero.
1 - import."
::= { gs2326plusExportOrImport 6 }
gs2326plusDiagnostics OBJECT IDENTIFIER ::= { gs2326plusMaintenance 5 }
gs2326plusPingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The destination IP Address. "
::= { gs2326plusDiagnostics 1 }
gs2326plusPingSize OBJECT-TYPE
SYNTAX Integer32(60..1400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Size of ICMP echo packet.
range : 60-1400, default : 64. "
::= { gs2326plusDiagnostics 2 }
gs2326plusDoPingConfig OBJECT-TYPE
SYNTAX INTEGER{ doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway. "
::= { gs2326plusDiagnostics 3 }
gs2326plusPingResult OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Show ping result. "
::= { gs2326plusDiagnostics 4 }
gs2326plusPing6IpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The destination IPv6 Address. "
::= { gs2326plusDiagnostics 5 }
gs2326plusPing6Size OBJECT-TYPE
SYNTAX Integer32(60..1400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Size of ICMP echo packet.
range : 60-1400. "
::= { gs2326plusDiagnostics 6 }
gs2326plusDoPing6Config OBJECT-TYPE
SYNTAX INTEGER{ doNothing(0), do(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway. "
::= { gs2326plusDiagnostics 7 }
gs2326plusPing6Result OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Show ping result. "
::= { gs2326plusDiagnostics 8 }
gs2326plusVeriPHY OBJECT IDENTIFIER ::= { gs2326plusDiagnostics 9 }
gs2326plusVeriPHYTest OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Run VeriPHY Cable Diagnostics.
port, range : 0 - port number.
0 : ALL "
::= { gs2326plusVeriPHY 1 }
gs2326plusVeriPHYTable OBJECT-TYPE
SYNTAX SEQUENCE OF Gs2326plusVeriPHYEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gs2326plusVeriPHY 2 }
gs2326plusVeriPHYEntry OBJECT-TYPE
SYNTAX Gs2326plusVeriPHYEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { gs2326plusVeriPHYPort }
::= { gs2326plusVeriPHYTable 1 }
Gs2326plusVeriPHYEntry ::= SEQUENCE {
gs2326plusVeriPHYPort Integer32,
gs2326plusVeriPHYPairA DisplayString,
gs2326plusVeriPHYLengthA DisplayString,
gs2326plusVeriPHYPairB DisplayString,
gs2326plusVeriPHYLengthB DisplayString,
gs2326plusVeriPHYPairC DisplayString,
gs2326plusVeriPHYLengthC DisplayString,
gs2326plusVeriPHYPairD DisplayString,
gs2326plusVeriPHYLengthD DisplayString
}
gs2326plusVeriPHYPort OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The length (in meters) of the cable pair. "
::= { gs2326plusVeriPHYEntry 1 }
gs2326plusVeriPHYPairA OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The status of the cable pair. "
::= { gs2326plusVeriPHYEntry 2 }
gs2326plusVeriPHYLengthA OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The length (in meters) of the cable pair. "
::= { gs2326plusVeriPHYEntry 3 }
gs2326plusVeriPHYPairB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The status of the cable pair. "
::= { gs2326plusVeriPHYEntry 4 }
gs2326plusVeriPHYLengthB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The length (in meters) of the cable pair. "
::= { gs2326plusVeriPHYEntry 5 }
gs2326plusVeriPHYPairC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The status of the cable pair. "
::= { gs2326plusVeriPHYEntry 6 }
gs2326plusVeriPHYLengthC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The length (in meters) of the cable pair. "
::= { gs2326plusVeriPHYEntry 7 }
gs2326plusVeriPHYPairD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The status of the cable pair. "
::= { gs2326plusVeriPHYEntry 8 }
gs2326plusVeriPHYLengthD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The length (in meters) of the cable pair. "
::= { gs2326plusVeriPHYEntry 9 }
------------------------------------------------------------------------------------------------------------------
gs2326plusTrap OBJECT IDENTIFIER ::= { lancomGS2326plus 5 }
gs2326plusTrapEvent OBJECT IDENTIFIER ::= { gs2326plusTrap 1 }
gs2326plusEmergency NOTIFICATION-TYPE
OBJECTS { gs2326plusInformation }
STATUS current
DESCRIPTION
"The severity level is Emergency. The system is unusable."
::= { gs2326plusTrapEvent 1 }
gs2326plusAlert NOTIFICATION-TYPE
OBJECTS { gs2326plusInformation }
STATUS current
DESCRIPTION
"The severity level is Alert. The action must be taken immediately."
::= { gs2326plusTrapEvent 2 }
gs2326plusCritical NOTIFICATION-TYPE
OBJECTS { gs2326plusInformation }
STATUS current
DESCRIPTION
"The severity level is Critical. Critical conditions."
::= { gs2326plusTrapEvent 3 }
gs2326plusError NOTIFICATION-TYPE
OBJECTS { gs2326plusInformation }
STATUS current
DESCRIPTION
"The severity level is Error. Error conditions."
::= { gs2326plusTrapEvent 4 }
gs2326plusWarning NOTIFICATION-TYPE
OBJECTS { gs2326plusInformation }
STATUS current
DESCRIPTION
"The severity level is Warning. Warning conditions."
::= { gs2326plusTrapEvent 5 }
gs2326plusNotice NOTIFICATION-TYPE
OBJECTS { gs2326plusInformation }
STATUS current
DESCRIPTION
"The severity level is Notice. Normal but significant condition."
::= { gs2326plusTrapEvent 6 }
gs2326plusInformational NOTIFICATION-TYPE
OBJECTS { gs2326plusInformation }
STATUS current
DESCRIPTION
"The severity level is Informational. Informational messages."
::= { gs2326plusTrapEvent 7 }
gs2326plusDebug NOTIFICATION-TYPE
OBJECTS { gs2326plusInformation }
STATUS current
DESCRIPTION
"The severity level is Debug. debug-level messages."
::= { gs2326plusTrapEvent 8 }
gs2326plusTrapVariable OBJECT IDENTIFIER ::= { gs2326plusTrap 2 }
gs2326plusInformation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trap information."
::= { gs2326plusTrapVariable 1 }
END
View Git Blame Copy Permalink