WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/infinera/LUM-SOAM-PM-MIB

3090 lines
101 KiB
Plaintext
Raw Blame History

LUM-SOAM-PM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64
FROM SNMPv2-SMI -- RFC 2578
TruthValue, MacAddress, DateAndTime, RowStatus, TimeInterval, DisplayString
FROM SNMPv2-TC -- RFC 2579
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF -- RFC 2580
Dot1agCfmMepIdOrZero
FROM IEEE8021-CFM-MIB
IEEE8021PriorityValue
FROM IEEE8021-TC-MIB -- IEEE 802.1ap
MefSoamTcSessionType, MefSoamTcStatusType
FROM MEF-SOAM-TC-MIB
lumModules, lumSoamPmMIB
FROM LUM-REG
MgmtNameString, SubrackNumber, SlotNumber, FaultStatus,
Unsigned32WithNA, BoardOrInterfaceOperStatus, BoardOrInterfaceAdminStatus, CommandString
FROM LUM-TC;
lumSoamPmMIBModule MODULE-IDENTITY
LAST-UPDATED
"201706150000Z" -- June 15th 2017
ORGANIZATION
"Infinera Corporation"
CONTACT-INFO
"techsupport@infinera.com"
DESCRIPTION
"This MIB module contains the management objects for the
management of Ethernet Services Operations, Administration
and Maintenance for Performance Monitoring (SOAM-PM).
"
REVISION
"201706150000Z" -- June 15th 2017
DESCRIPTION
"Changes made for release r29.0:
- Changed ORGANIZATION and CONTACT-INFO"
REVISION
"201601110000Z" -- Jan 11th 2016
DESCRIPTION
"Added default value notPresent for operStatus."
REVISION
"201501140000Z" -- Jan 14th 2015
DESCRIPTION
"Updated for revision R25:
-Added emxp240iie"
REVISION
"201405160000Z" -- May 16th 2014
DESCRIPTION
"Updated for revision R23."
::= { lumModules 60 }
-- ----------------------------------------------------
-- Compliance area, containing groups and compliance
-- specifications.
-- ----------------------------------------------------
lumSoamPmConfs OBJECT IDENTIFIER ::= { lumSoamPmMIB 1 }
-- *****************************************************************************
-- SOAM-PM MIB Module - Conformance Information
-- *****************************************************************************
lumSoamPmGroups OBJECT IDENTIFIER ::= { lumSoamPmConfs 1 }
lumSoamPmCompliances OBJECT IDENTIFIER ::= { lumSoamPmConfs 2 }
-- *****************************************************************************
-- Object definitions in the SOAM PM MIB Module
-- *****************************************************************************
lumSoamPmMIBObjects OBJECT IDENTIFIER ::= { lumSoamPmMIB 2 }
-- *****************************************************************************
-- Groups in the SOAM PM MIB Module
-- *****************************************************************************
soamPmGeneral OBJECT IDENTIFIER ::= { lumSoamPmMIBObjects 1 }
soamPmLmObjects OBJECT IDENTIFIER ::= { lumSoamPmMIBObjects 2 }
soamPmDmObjects OBJECT IDENTIFIER ::= { lumSoamPmMIBObjects 3 }
-- --------------------------------------------------
-- General group
-- --------------------------------------------------
soamPmGeneralLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the MIB was
last changed.
"
::= { soamPmGeneral 1 }
soamPmGeneralLmStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state of the MIB was last
changed.
"
::= { soamPmGeneral 2 }
soamPmGeneralLmObjectsTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of ethernet service OAM LM objects table
"
::= { soamPmGeneral 3 }
soamPmGeneralDmObjectsTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of ethernet service OAM DM objects table
"
::= { soamPmGeneral 4 }
-- ***************************************************************************
-- Ethernet Loss Measurement Configuration Table
-- ***************************************************************************
soamPmLmCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SoamPmLmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes configuration objects and operations for the
Frame Loss Measurement function defined in [Y.1731] and [MEF SOAM-PM].
Each row in the table represents a Loss Measurement session for
the defined remote MEP."
REFERENCE
"[MEF SOAM-PM] R68; [Y.1731]"
::= { soamPmLmObjects 1 }
soamPmLmCfgEntry OBJECT-TYPE
SYNTAX SoamPmLmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of soamPmLmCfgTable.
"
INDEX { soamPmLmCfgIndex }
::= { soamPmLmCfgTable 1 }
SoamPmLmCfgEntry ::=
SEQUENCE {
soamPmLmCfgIndex Unsigned32,
soamPmLmCfgName MgmtNameString,
soamPmLmCfgDescr DisplayString,
soamPmLmCfgSubrack SubrackNumber,
soamPmLmCfgSlot SlotNumber,
soamPmLmCfgEnabled TruthValue,
soamPmLmCfgMessagePeriod INTEGER,
soamPmLmCfgDestMacAddress MacAddress,
soamPmLmCfgMepName DisplayString,
soamPmLmCfgMaidIdentifier DisplayString,
soamPmLmCfgDestMepId Dot1agCfmMepIdOrZero,
soamPmLmCfgDestIsMepId TruthValue,
soamPmLmCfgInternalReference Unsigned32,
soamPmLmCfgLocalDeviceType INTEGER,
soamPmLmCfgType INTEGER,
soamPmLmCfgPriority IEEE8021PriorityValue,
soamPmLmCfgAvailabilityFlrThreshold Unsigned32,
soamPmLmCfgAvailabilityUasAlarmThreshold Unsigned32,
soamPmLmCfgSessionType MefSoamTcSessionType,
soamPmLmCfgSessionStatus MefSoamTcStatusType,
soamPmLmCfgCosAwareness INTEGER,
soamPmLmCfgRowStatus RowStatus,
soamPmLmCfgAdminStatus BoardOrInterfaceAdminStatus,
soamPmLmCfgOperStatus BoardOrInterfaceOperStatus,
soamPmLmCfgStats CommandString }
soamPmLmCfgIndex OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index to the Loss Measurement Configuration table which indicates
the specific measurement session for the MEP.
The index is not persistent and may be reused between restarts.
"
::= { soamPmLmCfgEntry 1 }
soamPmLmCfgName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the LM session.
The name has the same structure as the name of the remote mep.
LM:megname:slot:subrack:mepid:<priority>
The priority is not used for NID.
"
::= { soamPmLmCfgEntry 2 }
soamPmLmCfgDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User configurable label for the LM session.
"
DEFVAL { "" }
::= { soamPmLmCfgEntry 3 }
soamPmLmCfgSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the subrack where this OAM object is defined
"
::= { soamPmLmCfgEntry 4 }
soamPmLmCfgSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The slot where this OAM Object is defined.
"
::= { soamPmLmCfgEntry 5 }
soamPmLmCfgEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the Loss Measurement session
is enabled.
This Attribute is only used for NID,
Admin status and oper status are used in EMXP.
"
REFERENCE
"[MEF SOAM-PM] R4, R5, R6, O1, R12, R14"
DEFVAL { true }
::= { soamPmLmCfgEntry 6 }
soamPmLmCfgMessagePeriod OBJECT-TYPE
SYNTAX INTEGER {
interval100ms (0),
interval1s (1),
interval10s (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the interval between Loss Measurement
OAM message transmission. For Loss Measurement monitoring
applications the default value is 1 sec.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R76, R77, D29, D30"
DEFVAL { interval1s }
::= { soamPmLmCfgEntry 7 }
soamPmLmCfgDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Target or Destination MAC Address Field to be transmitted.
This address will be used if the value of the object
soamPmLmDestIsMepId is 'false'.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R70, R104"
::= { soamPmLmCfgEntry 8 }
soamPmLmCfgMepName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the MEP this LM session belongs to.
Persistent cross-reference to MEP table.
"
::= { soamPmLmCfgEntry 9 }
soamPmLmCfgMaidIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique user definied identifier for the MEG.
"
DEFVAL { "" }
::= { soamPmLmCfgEntry 10 }
soamPmLmCfgDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM LM frame is to be sent.
This address will be used if the value of the column
soamPmLmDestIsMepId is 'true'. A value of zero
means that the destination MEP ID has not been configured.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R70, R104"
DEFVAL { 0 }
::= { soamPmLmCfgEntry 11 }
soamPmLmCfgDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A value of 'true' indicates that MEPID of the target MEP is used for
SOAM LM frame transmission.
A value of 'false' indicates that the MAC address of the
target MEP is used for SOAM LM frame transmission.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R70, R104"
DEFVAL { true }
::= { soamPmLmCfgEntry 12 }
soamPmLmCfgInternalReference OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For internal use only.
"
DEFVAL { 0 }
::= {soamPmLmCfgEntry 13 }
soamPmLmCfgLocalDeviceType OBJECT-TYPE
SYNTAX INTEGER {
emxp (1),
nidGe (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of device the LM is created and associated.
"
DEFVAL { emxp }
::= { soamPmLmCfgEntry 14 }
soamPmLmCfgType OBJECT-TYPE
SYNTAX INTEGER {
lmLmm (1),
lmSlm (2),
lmCcm (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies what type of Loss Measurement
will be performed.
lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked
lmSlm(2) SLM SOAM PDU generated and received SLR responses tracked
lmCcm(3) CCM SOAM PDU generated and received CCM PDUs tracked
The lmSlm value is required. The lmLmm and lmCcm values are optional.
The lmCcm loss measurement values are only valid for a point-to-point
MEG. Multipoint MEGs may give unreliable loss measurements.
Only lmLmm is supported.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[Y.1731] [MEF SOAM-PM] R51, R68, O7, R102"
DEFVAL { lmLmm }
::= { soamPmLmCfgEntry 15 }
soamPmLmCfgPriority OBJECT-TYPE
SYNTAX IEEE8021PriorityValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the Loss Measurement OAM message priority
as well as the priority of the service/OAM traffic to be monitored.
If the session attibute soamPmLmCfgCosAwareness is 'priorityAware'
then only frames of the same Class of Service are counted.
If the Session is 'priorityBlind' then all frames
for all Class of Service combined are counted.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R1, R2, R71, D28, R72, R73, R105-R109, D45;
[MEF 10.2.1] Section 6.8"
DEFVAL { 0 }
::= { soamPmLmCfgEntry 16 }
soamPmLmCfgAvailabilityFlrThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies a configurable availability threshold to be
used in evaluating the availability/unavailability status of an
availability indicator per MEF 10.2.1. The availability threshold range
of 0.000 through 100.000 is supported. This parameter is
equivalent to the Availability parameter of 'C' as specified by
MEF 10.2.1.
For SNMP, units are in millipercent (percent with 3 decimals).
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF 10.2.1] Section 7.9.8; [MEF SOAM-PM] R81, R82, D34"
DEFVAL { 1 }
::= { soamPmLmCfgEntry 17 }
soamPmLmCfgAvailabilityUasAlarmThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object specifies the configurable number of seconds
the session shall be determined to be unavailable before raising
an alarm.
"
DEFVAL { 5 }
::= { soamPmLmCfgEntry 18 }
soamPmLmCfgSessionType OBJECT-TYPE
SYNTAX MefSoamTcSessionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the current session is defined to
be 'Proactive' or 'On-Demand'. A value of 'proactive'
indicates the current session is 'Proactive'. A value of 'onDemand'
indicates the current session is 'On-Demand'.
Only Proactive sessions are supported.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R3"
DEFVAL { proactive }
::= { soamPmLmCfgEntry 19 }
soamPmLmCfgSessionStatus OBJECT-TYPE
SYNTAX MefSoamTcStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current status of the LM session. A value
of 'active' indicates the current LM session is active, i.e. the current
time lies between the start time and the stop time, and
soamPmLmCfgEnabled is true. A value of 'notActive' indicates the
current LM session is not active, i.e. it has not started yet, has
stopped upon reaching the stop time, or is disabled.
"
::= { soamPmLmCfgEntry 20 }
soamPmLmCfgCosAwareness OBJECT-TYPE
SYNTAX INTEGER {
priorityBlind (1),
priorityAware (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define CoS awareness for the LM initiator.
A CoS aware LM Initiater will send counters associated with the priority of the sent LMM packets.
priorityBlind - LM Initiator is Cos unaware (counters for all priorities are aggregated.)
priorityAware - LM Responder is CoS aware (use counters associated with the priority of sent LMM packet).
"
DEFVAL { priorityBlind }
::= { soamPmLmCfgEntry 21 }
soamPmLmCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
This attribute can be written via SNMP.
"
::= { soamPmLmCfgEntry 22 }
soamPmLmCfgAdminStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative state for an LM Session.
down - The LM session should be inactive.
service - The LM session is activated but
alarms are suppressed. Intended for use during
service or re-configuration. When service is
concluded adminStatus should be set to 'up'
again.
up - The session should be activated when
it becomes available. Alarms are not suppressed.
notApplicable - used to tell that attribute
is not used in current configuration.
"
DEFVAL { up }
::= { soamPmLmCfgEntry 23 }
soamPmLmCfgOperStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
up - The object is active.
"
DEFVAL { notPresent }
::= { soamPmLmCfgEntry 24 }
soamPmLmCfgStats OBJECT-TYPE
SYNTAX CommandString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View current statistics for the LM session.
"
::= { soamPmLmCfgEntry 25 }
-- **************************************************************************
-- Ethernet Loss Measurement Current Statistic Table
-- **************************************************************************
soamPmLmStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SoamPmLmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the results for the current Measurement
Interval in a SOAM Loss Measurement session gathered during the interval
indicated by soamPmLmCfgMeasurementInterval.
A row in this table is created automatically
by the SNMP Agent when the Loss Measurement session is configured."
REFERENCE
"[MEF SOAM-PM] R7, R15, D9, D18"
::= { soamPmLmObjects 2 }
soamPmLmStatsEntry OBJECT-TYPE
SYNTAX SoamPmLmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of soamPmLmStatsTable
"
INDEX { soamPmLmStatsIndex }
::= { soamPmLmStatsTable 1 }
SoamPmLmStatsEntry ::=
SEQUENCE {
soamPmLmStatsIndex Unsigned32,
soamPmLmStatsLocalDeviceType INTEGER,
soamPmLmStatsName MgmtNameString,
soamPmLmStatsSubrack SubrackNumber,
soamPmLmStatsSlot SlotNumber,
soamPmLmStatsMaidIdentifier DisplayString,
soamPmLmStatsDestMepId Dot1agCfmMepIdOrZero,
soamPmLmStatsInternalReference Unsigned32,
soamPmLmStatsMepName DisplayString,
soamPmLmStatsSuspect15Min TruthValue,
soamPmLmStatsSuspectPrevious15Min TruthValue,
soamPmLmStatsSuspect24H TruthValue,
soamPmLmStatsReset15Min INTEGER,
soamPmLmStatsReset24H INTEGER,
soamPmLmStatsStartTime15Min DateAndTime,
soamPmLmStatsElapsedTime15Min TimeInterval,
soamPmLmStatsForwardTransmittedFrames15Min Counter64,
soamPmLmStatsForwardReceivedFrames15Min Counter64,
soamPmLmStatsForwardMinFlr15Min Unsigned32WithNA,
soamPmLmStatsForwardMaxFlr15Min Unsigned32,
soamPmLmStatsForwardAvgFlr15Min Unsigned32,
soamPmLmStatsForwardHighLoss15Min Unsigned32,
soamPmLmStatsBackwardTransmittedFrames15Min Counter64,
soamPmLmStatsBackwardReceivedFrames15Min Counter64,
soamPmLmStatsBackwardMinFlr15Min Unsigned32WithNA,
soamPmLmStatsBackwardMaxFlr15Min Unsigned32,
soamPmLmStatsBackwardAvgFlr15Min Unsigned32,
soamPmLmStatsBackwardHighLoss15Min Unsigned32,
soamPmLmStatsUnavailableSeconds15Min Unsigned32,
soamPmLmStatsStartTimePrevious15Min DateAndTime,
soamPmLmStatsElapsedTimePrevious15Min TimeInterval,
soamPmLmStatsForwardTransmittedFramesPrevious15Min Counter64,
soamPmLmStatsForwardReceivedFramesPrevious15Min Counter64,
soamPmLmStatsForwardMinFlrPrevious15Min Unsigned32WithNA,
soamPmLmStatsForwardMaxFlrPrevious15Min Unsigned32,
soamPmLmStatsForwardAvgFlrPrevious15Min Unsigned32,
soamPmLmStatsForwardHighLossPrevious15Min Unsigned32,
soamPmLmStatsBackwardTransmittedFramesPrevious15Min Counter64,
soamPmLmStatsBackwardReceivedFramesPrevious15Min Counter64,
soamPmLmStatsBackwardMinFlrPrevious15Min Unsigned32WithNA,
soamPmLmStatsBackwardMaxFlrPrevious15Min Unsigned32,
soamPmLmStatsBackwardAvgFlrPrevious15Min Unsigned32,
soamPmLmStatsBackwardHighLossPrevious15Min Unsigned32,
soamPmLmStatsStartTime24H DateAndTime,
soamPmLmStatsElapsedTime24H TimeInterval,
soamPmLmStatsForwardTransmittedFrames24H Counter64,
soamPmLmStatsForwardReceivedFrames24H Counter64,
soamPmLmStatsForwardMinFlr24H Unsigned32WithNA,
soamPmLmStatsForwardMaxFlr24H Unsigned32,
soamPmLmStatsForwardAvgFlr24H Unsigned32,
soamPmLmStatsForwardHighLoss24H Unsigned32,
soamPmLmStatsBackwardTransmittedFrames24H Counter64,
soamPmLmStatsBackwardReceivedFrames24H Counter64,
soamPmLmStatsBackwardMinFlr24H Unsigned32WithNA,
soamPmLmStatsBackwardMaxFlr24H Unsigned32,
soamPmLmStatsBackwardAvgFlr24H Unsigned32,
soamPmLmStatsBackwardHighLoss24H Unsigned32,
soamPmLmStatsUas FaultStatus,
soamPmLmStatsPriority IEEE8021PriorityValue }
soamPmLmStatsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index for the current Measurement Interval for this
PM session.
The index is the same as for the configuration, i.e soamPmLmCfgIndex
and is not persistent and may be reused between restarts.
"
::= { soamPmLmStatsEntry 1 }
soamPmLmStatsLocalDeviceType OBJECT-TYPE
SYNTAX INTEGER {
emxp (1),
nidGe (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of device the LM is created and associated.
"
DEFVAL { emxp }
::= { soamPmLmStatsEntry 2 }
soamPmLmStatsName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the LM session, same as the name of remote MEP
that this LM session is associated with.
"
::= { soamPmLmStatsEntry 3 }
soamPmLmStatsSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the subrack where this OAM object is defined
"
::= { soamPmLmStatsEntry 4 }
soamPmLmStatsSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot where this OAM Object is defined.
"
::= { soamPmLmStatsEntry 5 }
soamPmLmStatsMaidIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique user definied identifier for the MEG.
"
DEFVAL { "" }
::= { soamPmLmStatsEntry 6 }
soamPmLmStatsDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM LM frame is to be sent.
This address will be used if the value of the column
soamPmLmDestIsMepId is 'true'. A value of zero
means that the destination MEP ID has not been configured.
This object is only valid for the entity transmitting the Loss
Measurement frames, types 'lmLmm' and 'lmSlm'. It is not applicable for
the 'lmCcm' type.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R70, R104"
DEFVAL { 0 }
::= { soamPmLmStatsEntry 7 }
soamPmLmStatsInternalReference OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For internal use only.
"
DEFVAL { 0 }
::= { soamPmLmStatsEntry 8 }
soamPmLmStatsMepName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the MEP this LM session belongs to.
Persistent cross-reference to MEP table.
"
::= { soamPmLmStatsEntry 9 }
soamPmLmStatsSuspect15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the Measurement Interval has been marked as suspect.
The object is set to false at the start of a measurement
interval. It is set to true when there is a discontinuity in the
performance measurements during the Measurement Interval. Conditions
for a discontinuity include, but are not limited to the following:
1 - The local time-of-day clock is adjusted by at least 10 seconds
2 - The conducting of a performance measurement is halted before the
current Measurement Interval is completed
3 - A local test, failure, or reconfiguration that disrupts service
"
REFERENCE
"[MEF SOAM-PM] R39, R40, R41"
::= { soamPmLmStatsEntry 10 }
soamPmLmStatsSuspectPrevious15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the Measurement Interval has been marked as suspect.
The object is set to false at the start of a measurement
interval. It is set to true when there is a discontinuity in the
performance measurements during the Measurement Interval. Conditions
for a discontinuity include, but are not limited to the following:
1 - The local time-of-day clock is adjusted by at least 10 seconds
2 - The conducting of a performance measurement is halted before the
current Measurement Interval is completed
3 - A local test, failure, or reconfiguration that disrupts service
"
REFERENCE
"[MEF SOAM-PM] R39, R40, R41"
::= { soamPmLmStatsEntry 11 }
soamPmLmStatsSuspect24H OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the Measurement Interval has been marked as suspect.
The object is set to false at the start of a measurement
interval. It is set to true when there is a discontinuity in the
performance measurements during the Measurement Interval. Conditions
for a discontinuity include, but are not limited to the following:
1 - The local time-of-day clock is adjusted by at least 10 seconds
2 - The conducting of a performance measurement is halted before the
current Measurement Interval is completed
3 - A local test, failure, or reconfiguration that disrupts service
"
REFERENCE
"[MEF SOAM-PM] R39, R40, R41"
::= { soamPmLmStatsEntry 12 }
soamPmLmStatsReset15Min OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 15 minute counters for the
LM session.
After a successful reset the default value
(normal) is restored in this action attribute.
"
DEFVAL { normal }
::= { soamPmLmStatsEntry 13 }
soamPmLmStatsReset24H OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 24 hour counters for the LM session.
After a successful reset the default value
(normal) is restored in this action attribute.
"
DEFVAL { normal }
::= { soamPmLmStatsEntry 14 }
soamPmLmStatsStartTime15Min OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval started.
"
REFERENCE
"[MEF SOAM-PM] R22, R87, R112"
::= { soamPmLmStatsEntry 15 }
soamPmLmStatsElapsedTime15Min OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval has been running, in seconds.
"
REFERENCE
"[MEF SOAM-PM] R24, R87, R112"
::= { soamPmLmStatsEntry 16 }
soamPmLmStatsForwardTransmittedFrames15Min OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames transmitted in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of type lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 17 }
soamPmLmStatsForwardReceivedFrames15Min OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames received in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of types lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 18 }
soamPmLmStatsForwardMinFlr15Min OBJECT-TYPE
SYNTAX Unsigned32WithNA (0..100000 | 4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
DEFVAL { 4294967294 }
::= { soamPmLmStatsEntry 19 }
soamPmLmStatsForwardMaxFlr15Min OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 20 }
soamPmLmStatsForwardAvgFlr15Min OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 21 }
soamPmLmStatsForwardHighLoss15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the number of high loss intervals (HLI) over
time in the forward direction.
The value starts at 0 and increments for every HLI that occurs.
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
"
REFERENCE
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
::= { soamPmLmStatsEntry 22 }
soamPmLmStatsBackwardTransmittedFrames15Min OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames transmitted in the
backward direction by this MEP.
For a PM Session of type lmLmm and lmCcm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of type lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 23 }
soamPmLmStatsBackwardReceivedFrames15Min OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames received in the
backward direction by this MEP.
For a PM Session of type lmLmm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of type lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 24 }
soamPmLmStatsBackwardMinFlr15Min OBJECT-TYPE
SYNTAX Unsigned32WithNA (0..100000 | 4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
DEFVAL { 4294967294 }
::= { soamPmLmStatsEntry 25 }
soamPmLmStatsBackwardMaxFlr15Min OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 26 }
soamPmLmStatsBackwardAvgFlr15Min OBJECT-TYPE
SYNTAX Unsigned32 (0..100000 | 4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 27 }
soamPmLmStatsBackwardHighLoss15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the number of high loss intervals (HLI) over
time in the backwards direction.
The value starts at 0 and increments for every HLI that occurs.
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
"
REFERENCE
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
::= { soamPmLmStatsEntry 28 }
soamPmLmStatsUnavailableSeconds15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number if seconds the service has been
been unavailable during the 15 min interval.
The service has been unavailable when the FLR threshold is exceeded
in either the forward or backward direction.
"
::= { soamPmLmStatsEntry 29 }
soamPmLmStatsStartTimePrevious15Min OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval started.
"
REFERENCE
"[MEF SOAM-PM] R22, R87, R112"
::= { soamPmLmStatsEntry 30 }
soamPmLmStatsElapsedTimePrevious15Min OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval has been running, in seconds.
"
REFERENCE
"[MEF SOAM-PM] R24, R87, R112"
::= { soamPmLmStatsEntry 31 }
soamPmLmStatsForwardTransmittedFramesPrevious15Min OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames transmitted in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of type lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 32 }
soamPmLmStatsForwardReceivedFramesPrevious15Min OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames received in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of types lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 33 }
soamPmLmStatsForwardMinFlrPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32WithNA (0..100000 | 4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
DEFVAL { 4294967294 }
::= { soamPmLmStatsEntry 34 }
soamPmLmStatsForwardMaxFlrPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 35 }
soamPmLmStatsForwardAvgFlrPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 36 }
soamPmLmStatsForwardHighLossPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the number of high loss intervals (HLI) over
time in the forward direction.
The value starts at 0 and increments for every HLI that occurs.
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
"
REFERENCE
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
::= { soamPmLmStatsEntry 37 }
soamPmLmStatsBackwardTransmittedFramesPrevious15Min OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames transmitted in the
backward direction by this MEP.
For a PM Session of type lmLmm and lmCcm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of type lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 38 }
soamPmLmStatsBackwardReceivedFramesPrevious15Min OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames received in the
backward direction by this MEP.
For a PM Session of type lmLmm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of type lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 39 }
soamPmLmStatsBackwardMinFlrPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32WithNA (0..100000 | 4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
DEFVAL { 4294967294 }
::= { soamPmLmStatsEntry 40 }
soamPmLmStatsBackwardMaxFlrPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is expressed
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 41 }
soamPmLmStatsBackwardAvgFlrPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 42 }
soamPmLmStatsBackwardHighLossPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the number of high loss intervals (HLI) over
time in the backwards direction.
The value starts at 0 and increments for every HLI that occurs.
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
"
REFERENCE
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
::= { soamPmLmStatsEntry 43 }
soamPmLmStatsStartTime24H OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval started.
"
REFERENCE
"[MEF SOAM-PM] R22, R87, R112"
::= { soamPmLmStatsEntry 44 }
soamPmLmStatsElapsedTime24H OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval has been running, in seconds.
"
REFERENCE
"[MEF SOAM-PM] R24, R87, R112"
::= { soamPmLmStatsEntry 45 }
soamPmLmStatsForwardTransmittedFrames24H OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames transmitted in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of type lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 46 }
soamPmLmStatsForwardReceivedFrames24H OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames received in the
forward direction by this MEP.
For a PM Session of types lmLmm and lmCcm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of types lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 47 }
soamPmLmStatsForwardMinFlr24H OBJECT-TYPE
SYNTAX Unsigned32WithNA (0..100000 | 4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
DEFVAL { 4294967294 }
::= { soamPmLmStatsEntry 48 }
soamPmLmStatsForwardMaxFlr24H OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 49 }
soamPmLmStatsForwardAvgFlr24H OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average one-way frame loss
ratio (FLR) in the forward direction calculated by this MEP for this
Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 50 }
soamPmLmStatsForwardHighLoss24H OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the number of high loss intervals (HLI) over
time in the forward direction.
The value starts at 0 and increments for every HLI that occurs.
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
"
REFERENCE
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
::= { soamPmLmStatsEntry 51 }
soamPmLmStatsBackwardTransmittedFrames24H OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames transmitted in the
backward direction by this MEP.
For a PM Session of type lmLmm and lmCcm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of type lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 52 }
soamPmLmStatsBackwardReceivedFrames24H OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of frames received in the
backward direction by this MEP.
For a PM Session of type lmLmm this includes Ethernet
Service Frames and SOAM PDUs that are in a higher MEG level only.
For a PM Session of type lmSlm this includes the count of SOAM
ETH-SLM frames only.
"
REFERENCE
"[MEF SOAM-PM] R69, R87, R112"
::= { soamPmLmStatsEntry 53 }
soamPmLmStatsBackwardMinFlr24H OBJECT-TYPE
SYNTAX Unsigned32WithNA (0..100000 | 4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
DEFVAL { 4294967294 }
::= { soamPmLmStatsEntry 54 }
soamPmLmStatsBackwardMaxFlr24H OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is expressed
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 55 }
soamPmLmStatsBackwardAvgFlr24H OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average one-way frame loss
ratio (FLR) in the backward direction calculated by this MEP for
this Measurement Interval. The FLR value is a ratio that is expressed in
percent with a value of 0.000 through 100.000. Precision is in millipercent
"
REFERENCE
"[MEF SOAM-PM] D37"
::= { soamPmLmStatsEntry 56 }
soamPmLmStatsBackwardHighLoss24H OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the number of high loss intervals (HLI) over
time in the backwards direction.
The value starts at 0 and increments for every HLI that occurs.
This parameter is equivalent to 'L Sub T' found in MEF 10.2.1.
"
REFERENCE
"[MEF 10.2.1] 6.9.9; [MEF SOAM-PM] R87"
::= { soamPmLmStatsEntry 57 }
soamPmLmStatsUas OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (UAS) 15 min threshold
exceeded.
A: The number of unavailable seconds during a
period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated UAS counter is reset to zero, by
definition. At the same time the fault status
is cleared.
"
::= { soamPmLmStatsEntry 58 }
soamPmLmStatsPriority OBJECT-TYPE
SYNTAX IEEE8021PriorityValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Loss Measurement OAM message priority
as well as the priority of the service/OAM traffic to be monitored.
Only frames of the same Class of Service are counted.
The default value is to be the value which yields the lowest frame
loss.
This object is not applicable if soamPmLmCfgType is set to lmCcm.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R1, R2, R71, D28, R72, R73, R105-R109, D45;
[MEF 10.2.1] Section 6.8"
DEFVAL { 0 }
::= { soamPmLmStatsEntry 59 }
-- **************************************************************************
-- Ethernet Delay Measurement Configuration Table
-- **************************************************************************
soamPmDmCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SoamPmDmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes configuration objects and operations for the
Delay Measurement function.
Each row in the table represents a Delay Measurement session for
the defined remote MEP."
REFERENCE
"[MEF SOAM-PM] R50; [Y.1731]"
::= { soamPmDmObjects 1 }
soamPmDmCfgEntry OBJECT-TYPE
SYNTAX SoamPmDmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of soamPmDmCfgTable.
"
INDEX { soamPmDmCfgIndex }
::= { soamPmDmCfgTable 1 }
SoamPmDmCfgEntry ::=
SEQUENCE {
soamPmDmCfgIndex Unsigned32,
soamPmDmCfgName MgmtNameString,
soamPmDmCfgDescr DisplayString,
soamPmDmCfgSubrack SubrackNumber,
soamPmDmCfgSlot SlotNumber,
soamPmDmCfgInternalReference Unsigned32,
soamPmDmCfgLocalDeviceType INTEGER,
soamPmDmCfgDropEligible TruthValue,
soamPmDmCfgType INTEGER,
soamPmDmCfgEnabled TruthValue,
soamPmDmCfgMessagePeriod INTEGER,
soamPmDmCfgPriority IEEE8021PriorityValue,
soamPmDmCfgDestMacAddress MacAddress,
soamPmDmCfgMepName DisplayString,
soamPmDmCfgMaidIdentifier DisplayString,
soamPmDmCfgDestMepId Dot1agCfmMepIdOrZero,
soamPmDmCfgDestIsMepId TruthValue,
soamPmDmCfgSessionType MefSoamTcSessionType,
soamPmDmCfgSessionStatus MefSoamTcStatusType,
soamPmDmCfgRowStatus RowStatus,
soamPmDmCfgAdminStatus BoardOrInterfaceAdminStatus,
soamPmDmCfgOperStatus BoardOrInterfaceOperStatus,
soamPmDmCfgStats CommandString}
soamPmDmCfgIndex OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index to the Delay Measurement Configuration table which indicates
the specific measurement session for the MEP.
The index is not persistent and may be reused between restarts.
"
::= { soamPmDmCfgEntry 1 }
soamPmDmCfgName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the DM session.
The name has the same structure as the name of the remote mep.
DM:megname:slot:subrack:mepid:<priority>
The priority is not used for NID.
"
::= { soamPmDmCfgEntry 2 }
soamPmDmCfgDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User configurable label for the DM session.
"
DEFVAL { "" }
::= { soamPmDmCfgEntry 3 }
soamPmDmCfgSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the subrack where this OAM object is defined
"
::= { soamPmDmCfgEntry 4 }
soamPmDmCfgSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The slot where this OAM Object is defined.
"
::= { soamPmDmCfgEntry 5 }
soamPmDmCfgInternalReference OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For internal use only.
"
DEFVAL { 0 }
::= {soamPmDmCfgEntry 6 }
soamPmDmCfgLocalDeviceType OBJECT-TYPE
SYNTAX INTEGER {
emxp (1),
nidGe (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of device the DM is created and associated.
"
DEFVAL { emxp }
::= { soamPmDmCfgEntry 7 }
soamPmDmCfgDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the drop eligibility of a specific OAM frame.
Frames with ETH-DM information are always marked as drop ineligible.
"
REFERENCE
"[MEF SOAM-PM] R4, R5, R6, O1, R12, R14"
DEFVAL { false }
::= { soamPmDmCfgEntry 8 }
soamPmDmCfgType OBJECT-TYPE
SYNTAX INTEGER {
dmDmm (1),
dm1DmTx (2),
dm1DmRx (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates what type of Delay Measurement is to
be performed.
dmDmm(1) DMM SOAM PDU generated, DMR responses received
(one-way or two-way measurements)
dm1DmTx(2) 1DM SOAM PDU generated (one-way measurements are made by
the receiver)
dm1DmRx(3) 1DM SOAM PDU received and tracked (one-way measurements)
The exact PDUs to use are specified by this object in combination with
soamPmDmCfgVersion.
The value dmDMM is required. The values dm1DmTx and dm1DmRx are optional.
Only mmDmm is supported.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R52, R53, R54, O5, R88"
DEFVAL { dmDmm }
::= { soamPmDmCfgEntry 9 }
soamPmDmCfgEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the Delay Measurement session is
enabled.
This Attribute is only used for NID,
Admin status and oper status are used in EMXP.
"
REFERENCE
"[MEF SOAM-PM] R4, R5, R6, O1, R12, R14"
DEFVAL { true }
::= { soamPmDmCfgEntry 10 }
soamPmDmCfgMessagePeriod OBJECT-TYPE
SYNTAX INTEGER {
interval100ms (0),
interval1s (1),
interval10s (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the interval between Delay Measurement
OAM message transmission. For Delay Measurement monitoring
applications, the default value is 100ms s.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R61, R62, D22, R95, R96, D39"
DEFVAL { interval100ms }
::= { soamPmDmCfgEntry 11 }
soamPmDmCfgPriority OBJECT-TYPE
SYNTAX IEEE8021PriorityValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the priority of frames with
Delay Measurement OAM message information.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R1, R2, R56, D21, R57, R58, R90-R94, D28;
[MEF 10.2.1] Section 6.8"
DEFVAL { 0 }
::= { soamPmDmCfgEntry 12 }
soamPmDmCfgDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Target or Destination MAC Address Field to be transmitted.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R55, R89"
::= { soamPmDmCfgEntry 13 }
soamPmDmCfgMepName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the MEP this DM session belongs to.
Persistent cross-reference to MEP table.
"
::= { soamPmDmCfgEntry 14 }
soamPmDmCfgMaidIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique user definied identifier for the MEG.
"
DEFVAL { "" }
::= { soamPmDmCfgEntry 15 }
soamPmDmCfgDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM DM frame is to be sent.
This address will be used if the value of the column
soamPmDmDestIsMepId is 'true'. A value of zero
means that the destination MEP ID has not been configured.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R55, R89"
DEFVAL { 0 }
::= { soamPmDmCfgEntry 16 }
soamPmDmCfgDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A value of 'true' indicates that MEPID of the target MEP is used for
SOAM DM frame transmission.
A value of 'false' indicates that the destination MAC address of the
target MEP is used for SOAM DM frame transmission.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R55, R89"
DEFVAL { true }
::= { soamPmDmCfgEntry 17 }
soamPmDmCfgSessionType OBJECT-TYPE
SYNTAX MefSoamTcSessionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the current session is defined to
be 'Proactive' or 'On-Demand'. A value of 'proactive'
indicates the current session is 'Proactive'. A value of 'onDemand'
indicates the current session is 'On-Demand'.
Only Proactive is supported.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R3"
DEFVAL { proactive }
::= { soamPmDmCfgEntry 18 }
soamPmDmCfgSessionStatus OBJECT-TYPE
SYNTAX MefSoamTcStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current status of the DM session. A value
of 'active' indicates the current DM session is active.
A value of 'notActive' indicates the
current DM session is not active.
This attibute is only supported for NID.
For EXMP, admin and operstatus attyributes are used.
"
::= { soamPmDmCfgEntry 19 }
soamPmDmCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
This attribute can be written via SNMP.
"
::= { soamPmDmCfgEntry 20 }
soamPmDmCfgAdminStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative state for a DM Session.
down - The DM session should be inactive.
service - The DM session is activated but
alarms are suppressed. Intended for use during
service or re-configuration. When service is
concluded adminStatus should be set to 'up'
again.
up - The session should be activated when
it becomes available. Alarms are not suppressed.
notApplicable - used to tell that attribute
is not used in current configuration.
"
DEFVAL { up }
::= { soamPmDmCfgEntry 21 }
soamPmDmCfgOperStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
up - The object is active.
"
::= { soamPmDmCfgEntry 22 }
soamPmDmCfgStats OBJECT-TYPE
SYNTAX CommandString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View current statistics for the DM session.
"
::= { soamPmDmCfgEntry 23 }
-- **************************************************************************
-- Ethernet Delay Measurement Current Statistic Table
-- **************************************************************************
soamPmDmStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SoamPmDmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the results for the current Measurement
Interval in a SOAM Delay Measurement session gathered during the interval
indicated by soamPmLmCfgMeasurementInterval.
A row in this table is created automatically
by the SNMP Agent when the Delay Measurement session is configured."
REFERENCE
"[MEF SOAM-PM] R7, R15, D9, D18"
::= { soamPmDmObjects 2 }
soamPmDmStatsEntry OBJECT-TYPE
SYNTAX SoamPmDmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of soamPmDmStatsTable
"
INDEX { soamPmDmStatsIndex }
::= { soamPmDmStatsTable 1 }
SoamPmDmStatsEntry ::=
SEQUENCE {
soamPmDmStatsIndex Unsigned32,
soamPmDmStatsLocalDeviceType INTEGER,
soamPmDmStatsName MgmtNameString,
soamPmDmStatsSubrack SubrackNumber,
soamPmDmStatsSlot SlotNumber,
soamPmDmStatsMaidIdentifier DisplayString,
soamPmDmStatsDestMepId Dot1agCfmMepIdOrZero,
soamPmDmStatsInternalReference Unsigned32,
soamPmDmStatsMepName DisplayString,
soamPmDmStatsSuspect15Min TruthValue,
soamPmDmStatsSuspectPrevious15Min TruthValue,
soamPmDmStatsSuspect24H TruthValue,
soamPmDmStatsReset15Min INTEGER,
soamPmDmStatsReset24H INTEGER,
soamPmDmStatsStartTime15Min DateAndTime,
soamPmDmStatsElapsedTime15Min TimeInterval,
soamPmDmStatsFrameDelayTwoWayMin15Min Unsigned32WithNA,
soamPmDmStatsFrameDelayTwoWayMax15Min Unsigned32,
soamPmDmStatsFrameDelayTwoWayAvg15Min Unsigned32,
soamPmDmStatsIfdvTwoWayMin15Min Unsigned32WithNA,
soamPmDmStatsIfdvTwoWayMax15Min Unsigned32,
soamPmDmStatsIfdvTwoWayAvg15Min Unsigned32,
soamPmDmStatsStartTimePrevious15Min DateAndTime,
soamPmDmStatsElapsedTimePrevious15Min TimeInterval,
soamPmDmStatsFrameDelayTwoWayMinPrevious15Min Unsigned32WithNA,
soamPmDmStatsFrameDelayTwoWayMaxPrevious15Min Unsigned32,
soamPmDmStatsFrameDelayTwoWayAvgPrevious15Min Unsigned32,
soamPmDmStatsIfdvTwoWayMinPrevious15Min Unsigned32WithNA,
soamPmDmStatsIfdvTwoWayMaxPrevious15Min Unsigned32,
soamPmDmStatsIfdvTwoWayAvgPrevious15Min Unsigned32,
soamPmDmStatsStartTime24H DateAndTime,
soamPmDmStatsElapsedTime24H TimeInterval,
soamPmDmStatsFrameDelayTwoWayMin24H Unsigned32WithNA,
soamPmDmStatsFrameDelayTwoWayMax24H Unsigned32,
soamPmDmStatsFrameDelayTwoWayAvg24H Unsigned32,
soamPmDmStatsIfdvTwoWayMin24H Unsigned32WithNA,
soamPmDmStatsIfdvTwoWayMax24H Unsigned32,
soamPmDmStatsIfdvTwoWayAvg24H Unsigned32,
soamPmDmStatsPriority IEEE8021PriorityValue }
soamPmDmStatsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index for the current Measurement Interval for this
PM session.
The index is the same as for the configuration, i.e soamPmDmCfgIndex
and is not persistent and may be reused between restarts.
"
::= { soamPmDmStatsEntry 1 }
soamPmDmStatsLocalDeviceType OBJECT-TYPE
SYNTAX INTEGER {
emxp (1),
nidGe (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of device the DM is created and associated.
"
DEFVAL { emxp }
::= { soamPmDmStatsEntry 2 }
soamPmDmStatsName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the DM session, same as the name of remote MEP
that this DM session is associated with.
"
::= { soamPmDmStatsEntry 3 }
soamPmDmStatsSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the subrack where this OAM object is defined
"
::= { soamPmDmStatsEntry 4 }
soamPmDmStatsSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot where this OAM Object is defined.
"
::= { soamPmDmStatsEntry 5 }
soamPmDmStatsMaidIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique user definied identifier for the MEG.
"
DEFVAL { "" }
::= { soamPmDmStatsEntry 6 }
soamPmDmStatsDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM LM frame is to be sent.
This address will be used if the value of the column
soamPmLmDestIsMepId is 'true'. A value of zero
means that the destination MEP ID has not been configured.
This object is only valid for the entity transmitting the Loss
Measurement frames, types 'lmLmm' and 'lmSlm'. It is not applicable for
the 'lmCcm' type.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R70, R104"
DEFVAL { 0 }
::= { soamPmDmStatsEntry 7 }
soamPmDmStatsInternalReference OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For internal use only.
"
DEFVAL { 0 }
::= { soamPmDmStatsEntry 8 }
soamPmDmStatsMepName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the MEP this DM session belongs to.
Persistent cross-reference to MEP table.
"
::= { soamPmDmStatsEntry 9 }
soamPmDmStatsSuspect15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the Measurement Interval has been marked as suspect.
The object is to be set to false at the start of a measurement
interval. It is set to true when there is a discontinuity in the
performance measurements during the Measurement Interval. Conditions
for a discontinuity include, but are not limited to the following:
1 - The local time-of-day clock is adjusted by at least 10 seconds
2 - The conducting of a performance measurement is halted before the
current Measurement Interval is completed
3 - A local test, failure, or reconfiguration that disrupts service
"
REFERENCE
"[MEF SOAM-PM] R39, R40, R41"
::= { soamPmDmStatsEntry 10 }
soamPmDmStatsSuspectPrevious15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the Measurement Interval has been marked as suspect.
The object is to be set to false at the start of a measurement
interval. It is set to true when there is a discontinuity in the
performance measurements during the Measurement Interval. Conditions
for a discontinuity include, but are not limited to the following:
1 - The local time-of-day clock is adjusted by at least 10 seconds
2 - The conducting of a performance measurement is halted before the
current Measurement Interval is completed
3 - A local test, failure, or reconfiguration that disrupts service
"
REFERENCE
"[MEF SOAM-PM] R39, R40, R41"
::= { soamPmDmStatsEntry 11 }
soamPmDmStatsSuspect24H OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the Measurement Interval has been marked as suspect.
The object is to be set to false at the start of a measurement
interval. It is set to true when there is a discontinuity in the
performance measurements during the Measurement Interval. Conditions
for a discontinuity include, but are not limited to the following:
1 - The local time-of-day clock is adjusted by at least 10 seconds
2 - The conducting of a performance measurement is halted before the
current Measurement Interval is completed
3 - A local test, failure, or reconfiguration that disrupts service
"
REFERENCE
"[MEF SOAM-PM] R39, R40, R41"
::= { soamPmDmStatsEntry 12 }
soamPmDmStatsReset15Min OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 15 minute counters for the
DM session.
After a successful reset the default value
(normal) is restored in this action attribute.
"
DEFVAL { normal }
::= { soamPmDmStatsEntry 13 }
soamPmDmStatsReset24H OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 24 hour counters for the DM session.
After a successful reset the default value
(normal) is restored in this action attribute.
"
DEFVAL { normal }
::= { soamPmDmStatsEntry 14 }
soamPmDmStatsStartTime15Min OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval started.
"
REFERENCE
"[MEF SOAM-PM] R22, R66, R100"
::= { soamPmDmStatsEntry 15 }
soamPmDmStatsElapsedTime15Min OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval has been running, in seconds.
"
REFERENCE
"[MEF SOAM-PM] R24, R66, R100"
::= { soamPmDmStatsEntry 16 }
soamPmDmStatsFrameDelayTwoWayMin15Min OBJECT-TYPE
SYNTAX Unsigned32WithNA (0..100000 | 4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum two-way frame delay
calculated by this MEP for this Measurement Interval.
This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
REFERENCE
"[MEF SOAM-PM] R66"
DEFVAL { 4294967294 }
::= { soamPmDmStatsEntry 17 }
soamPmDmStatsFrameDelayTwoWayMax15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum two-way frame delay
calculated by this MEP for this Measurement Interval.
This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
REFERENCE
"[MEF SOAM-PM] R66"
::= { soamPmDmStatsEntry 18 }
soamPmDmStatsFrameDelayTwoWayAvg15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average two-way frame delay
calculated by this MEP for this Measurement Interval.
This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
REFERENCE
"[MEF SOAM-PM] R66"
::= { soamPmDmStatsEntry 19 }
soamPmDmStatsIfdvTwoWayMin15Min OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum two-way inter-frame delay
interval calculated by this MEP for this
Measurement Interval.
The value of this object is undefined when soamPmDmCfgType
is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
DEFVAL { 4294967294 }
::= { soamPmDmStatsEntry 20 }
soamPmDmStatsIfdvTwoWayMax15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum two-way inter-frame delay
interval calculated by this MEP for this
Measurement Interval.
The value of this object is undefined when soamPmDmCfgType
is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
::= { soamPmDmStatsEntry 21 }
soamPmDmStatsIfdvTwoWayAvg15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average two-way inter-frame delay
interval calculated by this MEP for this
Measurement Interval.
The value of this object is undefined when soamPmDmCfgType
is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
::= { soamPmDmStatsEntry 22 }
soamPmDmStatsStartTimePrevious15Min OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval started.
"
REFERENCE
"[MEF SOAM-PM] R22, R66, R100"
::= { soamPmDmStatsEntry 23 }
soamPmDmStatsElapsedTimePrevious15Min OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval has been running, in seconds.
"
REFERENCE
"[MEF SOAM-PM] R24, R66, R100"
::= { soamPmDmStatsEntry 24 }
soamPmDmStatsFrameDelayTwoWayMinPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum two-way frame delay
calculated by this MEP for this Measurement Interval.
This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
REFERENCE
"[MEF SOAM-PM] R66"
DEFVAL { 4294967294 }
::= { soamPmDmStatsEntry 25 }
soamPmDmStatsFrameDelayTwoWayMaxPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum two-way frame delay
calculated by this MEP for this Measurement Interval.
This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
REFERENCE
"[MEF SOAM-PM] R66"
::= { soamPmDmStatsEntry 26 }
soamPmDmStatsFrameDelayTwoWayAvgPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average two-way frame delay
calculated by this MEP for this Measurement Interval.
This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
REFERENCE
"[MEF SOAM-PM] R66"
::= { soamPmDmStatsEntry 27 }
soamPmDmStatsIfdvTwoWayMinPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum two-way inter-frame delay
interval calculated by this MEP for this
Measurement Interval.
The value of this object is undefined when soamPmDmCfgType
is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
DEFVAL { 4294967294 }
::= { soamPmDmStatsEntry 28 }
soamPmDmStatsIfdvTwoWayMaxPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum two-way inter-frame delay
interval calculated by this MEP for this
Measurement Interval.
The value of this object is undefined when soamPmDmCfgType
is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
::= { soamPmDmStatsEntry 29 }
soamPmDmStatsIfdvTwoWayAvgPrevious15Min OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average two-way inter-frame delay
interval calculated by this MEP for this
Measurement Interval.
The value of this object is undefined when soamPmDmCfgType
is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
::= { soamPmDmStatsEntry 30 }
soamPmDmStatsStartTime24H OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval started.
"
REFERENCE
"[MEF SOAM-PM] R22, R66, R100"
::= { soamPmDmStatsEntry 31 }
soamPmDmStatsElapsedTime24H OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the current Measurement Interval has been running, in seconds.
"
REFERENCE
"[MEF SOAM-PM] R24, R66, R100"
::= { soamPmDmStatsEntry 32 }
soamPmDmStatsFrameDelayTwoWayMin24H OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum two-way frame delay
calculated by this MEP for this Measurement Interval.
This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
REFERENCE
"[MEF SOAM-PM] R66"
DEFVAL { 4294967294 }
::= { soamPmDmStatsEntry 33 }
soamPmDmStatsFrameDelayTwoWayMax24H OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum two-way frame delay
calculated by this MEP for this Measurement Interval.
This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
REFERENCE
"[MEF SOAM-PM] R66"
::= { soamPmDmStatsEntry 34 }
soamPmDmStatsFrameDelayTwoWayAvg24H OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average two-way frame delay
calculated by this MEP for this Measurement Interval.
This object is undefined is soamPmDmCfgType is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
REFERENCE
"[MEF SOAM-PM] R66"
::= { soamPmDmStatsEntry 35 }
soamPmDmStatsIfdvTwoWayMin24H OBJECT-TYPE
SYNTAX Unsigned32WithNA
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum two-way inter-frame delay
interval calculated by this MEP for this
Measurement Interval.
The value of this object is undefined when soamPmDmCfgType
is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
DEFVAL { 4294967294 }
::= { soamPmDmStatsEntry 36 }
soamPmDmStatsIfdvTwoWayMax24H OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum two-way inter-frame delay
interval calculated by this MEP for this
Measurement Interval.
The value of this object is undefined when soamPmDmCfgType
is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
::= { soamPmDmStatsEntry 37 }
soamPmDmStatsIfdvTwoWayAvg24H OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the average two-way inter-frame delay
interval calculated by this MEP for this
Measurement Interval.
The value of this object is undefined when soamPmDmCfgType
is dm1DmTx or dm1DmRx.
Unit is micro-seconds.
"
::= { soamPmDmStatsEntry 38 }
soamPmDmStatsPriority OBJECT-TYPE
SYNTAX IEEE8021PriorityValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the priority of frames with
Delay Measurement OAM message information.
The default value is to be the value which yields the lowest frame
loss.
This object can only be written at creation time and cannot be
modified once it has been created.
"
REFERENCE
"[MEF SOAM-PM] R1, R2, R56, D21, R57, R58, R90-R94, D28;
[MEF 10.2.1] Section 6.8"
DEFVAL { 0 }
::= { soamPmDmStatsEntry 39 }
-- ******************************************************************
-- SOAM-PM MIB Units of conformance
-- ******************************************************************
soamPmGeneralGroupV1 OBJECT-GROUP
OBJECTS {
soamPmGeneralLastChangeTime,
soamPmGeneralLmStateLastChangeTime,
soamPmGeneralLmObjectsTableSize,
soamPmGeneralDmObjectsTableSize }
STATUS current
DESCRIPTION
"General objects for the MEF service OAM group (R22.0)."
::= { lumSoamPmGroups 1 }
soamPmLmCfgGroupV1 OBJECT-GROUP
OBJECTS {
soamPmLmCfgIndex,
soamPmLmCfgName,
soamPmLmCfgDescr,
soamPmLmCfgSubrack,
soamPmLmCfgSlot,
soamPmLmCfgInternalReference,
soamPmLmCfgLocalDeviceType,
soamPmLmCfgType,
soamPmLmCfgEnabled,
soamPmLmCfgMessagePeriod,
soamPmLmCfgPriority,
soamPmLmCfgDestMacAddress,
soamPmLmCfgMepName,
soamPmLmCfgMaidIdentifier,
soamPmLmCfgDestMepId,
soamPmLmCfgDestIsMepId,
soamPmLmCfgAvailabilityFlrThreshold,
soamPmLmCfgAvailabilityUasAlarmThreshold,
soamPmLmCfgSessionType,
soamPmLmCfgSessionStatus }
STATUS current
DESCRIPTION
"Objects for the MEF Service OAM LM Configuration group (R22.0)."
::= { lumSoamPmGroups 2 }
soamPmLmStatsGroupV1 OBJECT-GROUP
OBJECTS {
soamPmLmStatsIndex,
soamPmLmStatsLocalDeviceType,
soamPmLmStatsName,
soamPmLmStatsSubrack,
soamPmLmStatsSlot,
soamPmLmStatsDestMepId,
soamPmLmStatsMaidIdentifier,
soamPmLmStatsInternalReference,
soamPmLmStatsMepName,
soamPmLmStatsSuspect15Min,
soamPmLmStatsSuspectPrevious15Min,
soamPmLmStatsSuspect24H,
soamPmLmStatsReset15Min,
soamPmLmStatsReset24H,
soamPmLmStatsStartTime15Min,
soamPmLmStatsElapsedTime15Min,
soamPmLmStatsForwardTransmittedFrames15Min,
soamPmLmStatsForwardReceivedFrames15Min,
soamPmLmStatsForwardMinFlr15Min,
soamPmLmStatsForwardMaxFlr15Min,
soamPmLmStatsForwardAvgFlr15Min,
soamPmLmStatsForwardHighLoss15Min,
soamPmLmStatsBackwardTransmittedFrames15Min,
soamPmLmStatsBackwardReceivedFrames15Min,
soamPmLmStatsBackwardMinFlr15Min,
soamPmLmStatsBackwardMaxFlr15Min,
soamPmLmStatsBackwardAvgFlr15Min,
soamPmLmStatsBackwardHighLoss15Min,
soamPmLmStatsUnavailableSeconds15Min,
soamPmLmStatsStartTimePrevious15Min,
soamPmLmStatsElapsedTimePrevious15Min,
soamPmLmStatsForwardTransmittedFramesPrevious15Min,
soamPmLmStatsForwardReceivedFramesPrevious15Min,
soamPmLmStatsForwardMinFlrPrevious15Min,
soamPmLmStatsForwardMaxFlrPrevious15Min,
soamPmLmStatsForwardAvgFlrPrevious15Min,
soamPmLmStatsForwardHighLossPrevious15Min,
soamPmLmStatsBackwardTransmittedFramesPrevious15Min,
soamPmLmStatsBackwardReceivedFramesPrevious15Min,
soamPmLmStatsBackwardMinFlrPrevious15Min,
soamPmLmStatsBackwardMaxFlrPrevious15Min,
soamPmLmStatsBackwardAvgFlrPrevious15Min,
soamPmLmStatsBackwardHighLossPrevious15Min,
soamPmLmStatsStartTime24H,
soamPmLmStatsElapsedTime24H,
soamPmLmStatsForwardTransmittedFrames24H,
soamPmLmStatsForwardReceivedFrames24H,
soamPmLmStatsForwardMinFlr24H,
soamPmLmStatsForwardMaxFlr24H,
soamPmLmStatsForwardAvgFlr24H,
soamPmLmStatsForwardHighLoss24H,
soamPmLmStatsBackwardTransmittedFrames24H,
soamPmLmStatsBackwardReceivedFrames24H,
soamPmLmStatsBackwardMinFlr24H,
soamPmLmStatsBackwardMaxFlr24H,
soamPmLmStatsBackwardAvgFlr24H,
soamPmLmStatsBackwardHighLoss24H,
soamPmLmStatsUas }
STATUS current
DESCRIPTION
"Objects for the MEF Service OAM LM current statistics group (R22.0)."
::= { lumSoamPmGroups 3 }
soamPmDmCfgGroupV1 OBJECT-GROUP
OBJECTS {
soamPmDmCfgIndex,
soamPmDmCfgName,
soamPmDmCfgDescr,
soamPmDmCfgSubrack,
soamPmDmCfgSlot,
soamPmDmCfgInternalReference,
soamPmDmCfgLocalDeviceType,
soamPmDmCfgDropEligible,
soamPmDmCfgType,
soamPmDmCfgEnabled,
soamPmDmCfgMessagePeriod,
soamPmDmCfgPriority,
soamPmDmCfgDestMacAddress,
soamPmDmCfgMepName,
soamPmDmCfgMaidIdentifier,
soamPmDmCfgDestMepId,
soamPmDmCfgDestIsMepId,
soamPmDmCfgSessionType,
soamPmDmCfgSessionStatus }
STATUS current
DESCRIPTION
"Objects for the Service OAM DM configuration group (R22.0)."
::= { lumSoamPmGroups 4 }
soamPmDmStatsGroupV1 OBJECT-GROUP
OBJECTS {
soamPmDmStatsIndex,
soamPmDmStatsLocalDeviceType,
soamPmDmStatsName,
soamPmDmStatsSubrack,
soamPmDmStatsSlot,
soamPmDmStatsDestMepId,
soamPmDmStatsMaidIdentifier,
soamPmDmStatsInternalReference,
soamPmDmStatsMepName,
soamPmDmStatsSuspect15Min,
soamPmDmStatsSuspectPrevious15Min,
soamPmDmStatsSuspect24H,
soamPmDmStatsReset15Min,
soamPmDmStatsReset24H,
soamPmDmStatsStartTime15Min,
soamPmDmStatsElapsedTime15Min,
soamPmDmStatsFrameDelayTwoWayMin15Min,
soamPmDmStatsFrameDelayTwoWayMax15Min,
soamPmDmStatsFrameDelayTwoWayAvg15Min,
soamPmDmStatsIfdvTwoWayMin15Min,
soamPmDmStatsIfdvTwoWayMax15Min,
soamPmDmStatsIfdvTwoWayAvg15Min,
soamPmDmStatsStartTimePrevious15Min,
soamPmDmStatsElapsedTimePrevious15Min,
soamPmDmStatsFrameDelayTwoWayMinPrevious15Min,
soamPmDmStatsFrameDelayTwoWayMaxPrevious15Min,
soamPmDmStatsFrameDelayTwoWayAvgPrevious15Min,
soamPmDmStatsIfdvTwoWayMinPrevious15Min,
soamPmDmStatsIfdvTwoWayMaxPrevious15Min,
soamPmDmStatsIfdvTwoWayAvgPrevious15Min,
soamPmDmStatsStartTime24H,
soamPmDmStatsElapsedTime24H,
soamPmDmStatsFrameDelayTwoWayMin24H,
soamPmDmStatsFrameDelayTwoWayMax24H,
soamPmDmStatsFrameDelayTwoWayAvg24H,
soamPmDmStatsIfdvTwoWayMin24H,
soamPmDmStatsIfdvTwoWayMax24H,
soamPmDmStatsIfdvTwoWayAvg24H }
STATUS current
DESCRIPTION
"Objects for the Service OAM DM current statistics group (R22.0)."
::= { lumSoamPmGroups 5 }
soamPmLmCfgGroupV2 OBJECT-GROUP
OBJECTS {
soamPmLmCfgIndex,
soamPmLmCfgName,
soamPmLmCfgDescr,
soamPmLmCfgSubrack,
soamPmLmCfgSlot,
soamPmLmCfgInternalReference,
soamPmLmCfgLocalDeviceType,
soamPmLmCfgType,
soamPmLmCfgEnabled,
soamPmLmCfgMessagePeriod,
soamPmLmCfgPriority,
soamPmLmCfgDestMacAddress,
soamPmLmCfgMepName,
soamPmLmCfgMaidIdentifier,
soamPmLmCfgDestMepId,
soamPmLmCfgDestIsMepId,
soamPmLmCfgAvailabilityFlrThreshold,
soamPmLmCfgAvailabilityUasAlarmThreshold,
soamPmLmCfgSessionType,
soamPmLmCfgSessionStatus,
soamPmLmCfgCosAwareness,
soamPmLmCfgRowStatus,
soamPmLmCfgAdminStatus,
soamPmLmCfgOperStatus }
STATUS current
DESCRIPTION
"Objects for the MEF Service OAM LM Configuration group (R23.0)."
::= { lumSoamPmGroups 6 }
soamPmDmCfgGroupV2 OBJECT-GROUP
OBJECTS {
soamPmDmCfgIndex,
soamPmDmCfgName,
soamPmDmCfgDescr,
soamPmDmCfgSubrack,
soamPmDmCfgSlot,
soamPmDmCfgInternalReference,
soamPmDmCfgLocalDeviceType,
soamPmDmCfgDropEligible,
soamPmDmCfgType,
soamPmDmCfgEnabled,
soamPmDmCfgMessagePeriod,
soamPmDmCfgPriority,
soamPmDmCfgDestMacAddress,
soamPmDmCfgMepName,
soamPmDmCfgMaidIdentifier,
soamPmDmCfgDestMepId,
soamPmDmCfgDestIsMepId,
soamPmDmCfgSessionType,
soamPmDmCfgSessionStatus,
soamPmDmCfgRowStatus,
soamPmDmCfgAdminStatus,
soamPmDmCfgOperStatus }
STATUS current
DESCRIPTION
"Objects for the Service OAM DM configuration group (R23.0)."
::= { lumSoamPmGroups 7 }
soamPmLmStatsGroupV2 OBJECT-GROUP
OBJECTS {
soamPmLmStatsIndex,
soamPmLmStatsLocalDeviceType,
soamPmLmStatsName,
soamPmLmStatsSubrack,
soamPmLmStatsSlot,
soamPmLmStatsDestMepId,
soamPmLmStatsMaidIdentifier,
soamPmLmStatsInternalReference,
soamPmLmStatsMepName,
soamPmLmStatsSuspect15Min,
soamPmLmStatsSuspectPrevious15Min,
soamPmLmStatsSuspect24H,
soamPmLmStatsReset15Min,
soamPmLmStatsReset24H,
soamPmLmStatsStartTime15Min,
soamPmLmStatsElapsedTime15Min,
soamPmLmStatsForwardTransmittedFrames15Min,
soamPmLmStatsForwardReceivedFrames15Min,
soamPmLmStatsForwardMinFlr15Min,
soamPmLmStatsForwardMaxFlr15Min,
soamPmLmStatsForwardAvgFlr15Min,
soamPmLmStatsForwardHighLoss15Min,
soamPmLmStatsBackwardTransmittedFrames15Min,
soamPmLmStatsBackwardReceivedFrames15Min,
soamPmLmStatsBackwardMinFlr15Min,
soamPmLmStatsBackwardMaxFlr15Min,
soamPmLmStatsBackwardAvgFlr15Min,
soamPmLmStatsBackwardHighLoss15Min,
soamPmLmStatsUnavailableSeconds15Min,
soamPmLmStatsStartTimePrevious15Min,
soamPmLmStatsElapsedTimePrevious15Min,
soamPmLmStatsForwardTransmittedFramesPrevious15Min,
soamPmLmStatsForwardReceivedFramesPrevious15Min,
soamPmLmStatsForwardMinFlrPrevious15Min,
soamPmLmStatsForwardMaxFlrPrevious15Min,
soamPmLmStatsForwardAvgFlrPrevious15Min,
soamPmLmStatsForwardHighLossPrevious15Min,
soamPmLmStatsBackwardTransmittedFramesPrevious15Min,
soamPmLmStatsBackwardReceivedFramesPrevious15Min,
soamPmLmStatsBackwardMinFlrPrevious15Min,
soamPmLmStatsBackwardMaxFlrPrevious15Min,
soamPmLmStatsBackwardAvgFlrPrevious15Min,
soamPmLmStatsBackwardHighLossPrevious15Min,
soamPmLmStatsStartTime24H,
soamPmLmStatsElapsedTime24H,
soamPmLmStatsForwardTransmittedFrames24H,
soamPmLmStatsForwardReceivedFrames24H,
soamPmLmStatsForwardMinFlr24H,
soamPmLmStatsForwardMaxFlr24H,
soamPmLmStatsForwardAvgFlr24H,
soamPmLmStatsForwardHighLoss24H,
soamPmLmStatsBackwardTransmittedFrames24H,
soamPmLmStatsBackwardReceivedFrames24H,
soamPmLmStatsBackwardMinFlr24H,
soamPmLmStatsBackwardMaxFlr24H,
soamPmLmStatsBackwardAvgFlr24H,
soamPmLmStatsBackwardHighLoss24H,
soamPmLmStatsUas,
soamPmLmStatsPriority }
STATUS current
DESCRIPTION
"Objects for the MEF Service OAM LM current statistics group (R23.0)."
::= { lumSoamPmGroups 8 }
soamPmDmStatsGroupV2 OBJECT-GROUP
OBJECTS {
soamPmDmStatsIndex,
soamPmDmStatsLocalDeviceType,
soamPmDmStatsName,
soamPmDmStatsSubrack,
soamPmDmStatsSlot,
soamPmDmStatsDestMepId,
soamPmDmStatsMaidIdentifier,
soamPmDmStatsInternalReference,
soamPmDmStatsMepName,
soamPmDmStatsSuspect15Min,
soamPmDmStatsSuspectPrevious15Min,
soamPmDmStatsSuspect24H,
soamPmDmStatsReset15Min,
soamPmDmStatsReset24H,
soamPmDmStatsStartTime15Min,
soamPmDmStatsElapsedTime15Min,
soamPmDmStatsFrameDelayTwoWayMin15Min,
soamPmDmStatsFrameDelayTwoWayMax15Min,
soamPmDmStatsFrameDelayTwoWayAvg15Min,
soamPmDmStatsIfdvTwoWayMin15Min,
soamPmDmStatsIfdvTwoWayMax15Min,
soamPmDmStatsIfdvTwoWayAvg15Min,
soamPmDmStatsStartTimePrevious15Min,
soamPmDmStatsElapsedTimePrevious15Min,
soamPmDmStatsFrameDelayTwoWayMinPrevious15Min,
soamPmDmStatsFrameDelayTwoWayMaxPrevious15Min,
soamPmDmStatsFrameDelayTwoWayAvgPrevious15Min,
soamPmDmStatsIfdvTwoWayMinPrevious15Min,
soamPmDmStatsIfdvTwoWayMaxPrevious15Min,
soamPmDmStatsIfdvTwoWayAvgPrevious15Min,
soamPmDmStatsStartTime24H,
soamPmDmStatsElapsedTime24H,
soamPmDmStatsFrameDelayTwoWayMin24H,
soamPmDmStatsFrameDelayTwoWayMax24H,
soamPmDmStatsFrameDelayTwoWayAvg24H,
soamPmDmStatsIfdvTwoWayMin24H,
soamPmDmStatsIfdvTwoWayMax24H,
soamPmDmStatsIfdvTwoWayAvg24H,
soamPmDmStatsPriority }
STATUS current
DESCRIPTION
"Objects for the Service OAM DM current statistics group (R23.0)."
::= { lumSoamPmGroups 9 }
soamPmLmCfgGroupV3 OBJECT-GROUP
OBJECTS {
soamPmLmCfgIndex,
soamPmLmCfgName,
soamPmLmCfgDescr,
soamPmLmCfgSubrack,
soamPmLmCfgSlot,
soamPmLmCfgInternalReference,
soamPmLmCfgLocalDeviceType,
soamPmLmCfgType,
soamPmLmCfgEnabled,
soamPmLmCfgMessagePeriod,
soamPmLmCfgPriority,
soamPmLmCfgDestMacAddress,
soamPmLmCfgMepName,
soamPmLmCfgMaidIdentifier,
soamPmLmCfgDestMepId,
soamPmLmCfgDestIsMepId,
soamPmLmCfgAvailabilityFlrThreshold,
soamPmLmCfgAvailabilityUasAlarmThreshold,
soamPmLmCfgSessionType,
soamPmLmCfgSessionStatus,
soamPmLmCfgCosAwareness,
soamPmLmCfgRowStatus,
soamPmLmCfgAdminStatus,
soamPmLmCfgOperStatus,
soamPmLmCfgStats}
STATUS current
DESCRIPTION
"Objects for the MEF Service OAM LM Configuration group (R25.0)."
::= { lumSoamPmGroups 10 }
soamPmDmCfgGroupV3 OBJECT-GROUP
OBJECTS {
soamPmDmCfgIndex,
soamPmDmCfgName,
soamPmDmCfgDescr,
soamPmDmCfgSubrack,
soamPmDmCfgSlot,
soamPmDmCfgInternalReference,
soamPmDmCfgLocalDeviceType,
soamPmDmCfgDropEligible,
soamPmDmCfgType,
soamPmDmCfgEnabled,
soamPmDmCfgMessagePeriod,
soamPmDmCfgPriority,
soamPmDmCfgDestMacAddress,
soamPmDmCfgMepName,
soamPmDmCfgMaidIdentifier,
soamPmDmCfgDestMepId,
soamPmDmCfgDestIsMepId,
soamPmDmCfgSessionType,
soamPmDmCfgSessionStatus,
soamPmDmCfgRowStatus,
soamPmDmCfgAdminStatus,
soamPmDmCfgOperStatus,
soamPmDmCfgStats }
STATUS current
DESCRIPTION
"Objects for the Service OAM DM configuration group (R25.0)."
::= { lumSoamPmGroups 11 }
-- ******************************************************************
-- SOAM-PM MIB Module Compliance statements
-- ******************************************************************
soamPmBasicComplV1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the MEF Service OAM PM MIB. (R22.0)"
MODULE
MANDATORY-GROUPS {
soamPmGeneralGroupV1,
soamPmLmCfgGroupV1,
soamPmLmStatsGroupV1,
soamPmDmCfgGroupV1,
soamPmDmStatsGroupV1 }
::= { lumSoamPmCompliances 1 }
soamPmBasicComplV2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the MEF Service OAM PM MIB. (R23.0)"
MODULE
MANDATORY-GROUPS {
soamPmGeneralGroupV1,
soamPmLmCfgGroupV2,
soamPmLmStatsGroupV2,
soamPmDmCfgGroupV2,
soamPmDmStatsGroupV2 }
::= { lumSoamPmCompliances 2 }
soamPmBasicComplV3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the MEF Service OAM PM MIB. (R25.0)"
MODULE
MANDATORY-GROUPS {
soamPmGeneralGroupV1,
soamPmLmCfgGroupV3,
soamPmLmStatsGroupV2,
soamPmDmCfgGroupV3,
soamPmDmStatsGroupV2 }
::= { lumSoamPmCompliances 3 }
END
View Git Blame Copy Permalink