2456 lines
79 KiB
Plaintext
2456 lines
79 KiB
Plaintext
-- ============================================================================
|
|
-- Copyright (C) 2014 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
-- Description: Huawei TDM Modem management MIB definition.
|
|
-- Reference:
|
|
-- Version: V1.02
|
|
-- ============================================================================
|
|
|
|
HUAWEI-TDMCPE-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Gauge32,
|
|
Unsigned32, Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
huaweiMgmt
|
|
FROM HUAWEI-MIB;
|
|
|
|
hwTdmMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201406230900Z"
|
|
ORGANIZATION "Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
DESCRIPTION
|
|
"Huawei TDM Modem management MIB definition."
|
|
|
|
-- Revision history
|
|
REVISION "201406230900Z"
|
|
DESCRIPTION "V1.02, Correct the ORGANIZATION and CONTACT-INFO information."
|
|
|
|
REVISION "201201020900Z"
|
|
DESCRIPTION "V1.01,
|
|
Add new nodes, including hwTdmCommonConfiguration,hwTdmAdtranScriptTable,
|
|
hwTdmAdtranScriptEntry, hwTdmAdtranScript and hwTdmAdtranScriptResult.
|
|
modify the description of the whole file."
|
|
|
|
REVISION "200506211000Z"
|
|
DESCRIPTION "V1.00,Finishing TDM management basic MIB definition."
|
|
|
|
::= { huaweiMgmt 30 }
|
|
|
|
--
|
|
-- Groups in hwTdmMIB
|
|
--
|
|
hwTdmMIBObjects OBJECT IDENTIFIER ::= { hwTdmMIB 1 }
|
|
hwTdmMIBConformance OBJECT IDENTIFIER ::= { hwTdmMIB 2 }
|
|
|
|
--
|
|
-- Groups in hwTdmMIBObjects
|
|
--
|
|
hwTdmTftpObjects OBJECT IDENTIFIER ::= { hwTdmMIBObjects 1 }
|
|
hwTdmModemObjects OBJECT IDENTIFIER ::= { hwTdmMIBObjects 2 }
|
|
hwTdmPortObjects OBJECT IDENTIFIER ::= { hwTdmMIBObjects 3 }
|
|
-- hwTdmTraps OBJECT IDENTIFIER ::= { hwTdmMIBObjects 4 }
|
|
hwTdmCommonConfiguration OBJECT IDENTIFIER ::= { hwTdmMIBObjects 4 }
|
|
|
|
--
|
|
-- Groups in hwTdmPortObjects
|
|
--
|
|
hwTdmPortConfObjects OBJECT IDENTIFIER ::= { hwTdmPortObjects 1 }
|
|
hwTdmPortStatObjects OBJECT IDENTIFIER ::= { hwTdmPortObjects 2 }
|
|
|
|
--
|
|
-- Groups in hwTdmMIBConformance
|
|
--
|
|
hwTdmMIBCompliances OBJECT IDENTIFIER ::= { hwTdmMIBConformance 1 }
|
|
hwTdmMIBGroups OBJECT IDENTIFIER ::= { hwTdmMIBConformance 2 }
|
|
|
|
--
|
|
-- ASMi52A Modem TFTP Table
|
|
--
|
|
hwTdmTftpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmTftpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about
|
|
a TDM modem tftp status. This information describe
|
|
the TFTP server IP address, the file name, the TFTP
|
|
command and TFTP status.The index of this table is ifIndex."
|
|
::= { hwTdmTftpObjects 1 }
|
|
|
|
hwTdmTftpEntry OBJECT-TYPE
|
|
SYNTAX HwTdmTftpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about
|
|
a TDM modem tftp status. This information describe
|
|
the TFTP server IP address, the file name, the TFTP
|
|
command and TFTP status.The index of this entry is ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { hwTdmTftpTable 1 }
|
|
|
|
HwTdmTftpEntry ::=
|
|
SEQUENCE {
|
|
hwTdmTftpFileServerIP
|
|
IpAddress,
|
|
hwTdmTftpFileName
|
|
DisplayString,
|
|
hwTdmTftpFileTransCmd
|
|
INTEGER,
|
|
-- hwTdmTftpRetryTimeout
|
|
-- Unsigned32,
|
|
-- hwTdmTftpTotalTimeout
|
|
-- Unsigned32,
|
|
hwTdmTftpStatus
|
|
INTEGER
|
|
}
|
|
|
|
hwTdmTftpFileServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the TFTP server to update the
|
|
modem software.This must be set before start the software
|
|
download!"
|
|
::= { hwTdmTftpEntry 1 }
|
|
|
|
hwTdmTftpFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..14))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the name of the file to be sent
|
|
to the modem. This must be set before start the software
|
|
download!"
|
|
::= { hwTdmTftpEntry 2 }
|
|
|
|
hwTdmTftpFileTransCmd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noOp(1),
|
|
downloadSW(2),
|
|
uploadConf(3),
|
|
downloadConf(4),
|
|
stop(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The command to be executed on hwTdmTftpFileName at
|
|
hwTdmTftpFileServerIP.
|
|
Options:
|
|
1. noOp(1) - Indicates that no operation.
|
|
2. downloadSW(2) - Indicates that down load softwire.
|
|
3. uploadConf(3) - Indicates that upload configuration.
|
|
4. downloadConf(4) - Indicates that down load configuration.
|
|
5. stop(5) - Indicates that stopping the current operation.
|
|
"
|
|
DEFVAL { noOp }
|
|
::= { hwTdmTftpEntry 3 }
|
|
|
|
-- hwTdmTftpRetryTimeout OBJECT-TYPE
|
|
-- SYNTAX Unsigned32 (1..255)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "TFTP retry timeout."
|
|
-- DEFVAL { 30 }
|
|
-- ::= { hwTdmTftpEntry 4 }
|
|
|
|
-- hwTdmTftpTotalTimeout OBJECT-TYPE
|
|
-- SYNTAX Unsigned32 (1..255)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "TFTP total timeout."
|
|
-- DEFVAL { 240 }
|
|
-- ::= { hwTdmTftpEntry 5 }
|
|
|
|
hwTdmTftpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noOp(1),
|
|
connecting(2),
|
|
transferringData(3),
|
|
timeOut(4),
|
|
endedOk(5),
|
|
error(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of tftp session. When a session ended with success,
|
|
the tftpStatus should be endedOk(6). Before restarting a
|
|
tftp session, the modem should set the tftpStatus to noOp(2).
|
|
Options:
|
|
1. noOp(1) - Indicates that no operation.
|
|
2. connecting(2) - Indicates that connecting.
|
|
3. transferringData(3) - Indicates that transferring data.
|
|
4. timeOut(4) - Indicates that time-out.
|
|
5. endedOk(5) - Indicates that end successfully.
|
|
6. error(6) - Indicates that error occur.
|
|
"
|
|
::= { hwTdmTftpEntry 4 }
|
|
|
|
--
|
|
-- ASMi52A Modem Information Table
|
|
--
|
|
hwTdmModemInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmModemInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a
|
|
TDM modem system information. This information describe
|
|
the maximum rate, the PSD type, the interface type of the
|
|
DTE port, the modem wiring, the actual ASMi52 type, the
|
|
modem hardware version, the modem software version, IP
|
|
address and MAC address.The index of this table is ifIndex."
|
|
::= { hwTdmModemObjects 1 }
|
|
|
|
hwTdmModemInfoEntry OBJECT-TYPE
|
|
SYNTAX HwTdmModemInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a
|
|
TDM modem system information. This information describe
|
|
the maximum rate, the PSD type, the interface type of the
|
|
DTE port, the modem wiring, the actual ASMi52 type, the
|
|
modem hardware version, the modem software version, IP
|
|
address and MAC address.The index of this entry is ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { hwTdmModemInfoTable 1 }
|
|
|
|
HwTdmModemInfoEntry ::=
|
|
SEQUENCE {
|
|
hwTdmModemInfoDteIfType
|
|
INTEGER,
|
|
hwTdmModemInfoWireMode
|
|
INTEGER,
|
|
hwTdmModemInfoModemType
|
|
INTEGER,
|
|
hwTdmModemInfoHwVer
|
|
OCTET STRING,
|
|
hwTdmModemInfoSwVer
|
|
OCTET STRING,
|
|
hwTdmModemSupportEOC
|
|
INTEGER,
|
|
hwTdmModemLowerSpeedOper
|
|
INTEGER,
|
|
hwTdmModemDtePortState
|
|
INTEGER,
|
|
hwTdmModemE1PortState
|
|
INTEGER
|
|
}
|
|
|
|
hwTdmModemInfoDteIfType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
x21(0),
|
|
v35(1),
|
|
v24(2),
|
|
rs530(3),
|
|
irETHQN(5),
|
|
g703r64k(6),
|
|
irHSSI(7),
|
|
g704(8),
|
|
irT1(28),
|
|
g703(29),
|
|
other(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the interface type of the DTE port.
|
|
Options:
|
|
1. x21(0) - Indicates that the interface type of the DTE port is x21.
|
|
2. v35(1) - Indicates that the interface type of the DTE port is v35.
|
|
3. v24(2) - Indicates that the interface type of the DTE port is v24.
|
|
4. rs530(3) - Indicates that the interface type of the DTE port is rs530.
|
|
5. irETHQN(5) - Indicates that the interface type of the DTE port is irETHQN.
|
|
6. g703r64k(6) - Indicates that the interface type of the DTE port is g703r64k.
|
|
7. irHSSI(7) - Indicates that the interface type of the DTE port is irHSSI.
|
|
8. g704(8) - Indicates that the interface type of the DTE port is g704.
|
|
9. irT1(28) - Indicates that the interface type of the DTE port is irT1.
|
|
10. g703(29) - Indicates that the interface type of the DTE port is g703.
|
|
11. other(255) - Indicates that the interface type of the DTE port is other.
|
|
"
|
|
::= { hwTdmModemInfoEntry 2 }
|
|
|
|
hwTdmModemInfoWireMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
twoWire(1),
|
|
fourWire(2),
|
|
notApplicable(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the modem wiring.
|
|
Options:
|
|
1. twoWire(1) - Indicates that the modem wiring is twoWire.
|
|
2. fourWire(2) - Indicates that the modem wiring is fourWire.
|
|
3. notApplicable(255) - Indicates that the modem wiring isnotApplicable.
|
|
"
|
|
::= { hwTdmModemInfoEntry 3 }
|
|
|
|
hwTdmModemInfoModemType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
cardData(1),
|
|
cardE1T1(2),
|
|
cardDataE1(3),
|
|
cardEthernet(4),
|
|
cardDataEthernet(5),
|
|
cardE1T1Ethernet(6),
|
|
cardDataE1T1Ethernet(7),
|
|
cardDataEthm(9),
|
|
cardE1T1Ethm(10),
|
|
cardDataE1Ethm(11),
|
|
cardEthernetEthm(12),
|
|
cardDataEthernetEthm(13),
|
|
cardE1T1EthernetEthm(14),
|
|
cardDataE1T1EthernetEthm(15)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the actual ASMi52 type.
|
|
Options:
|
|
1. none(0) - Indicates that the actual ASMi52 type is none.
|
|
2. cardData(1) - Indicates that the actual ASMi52 type is cardData.
|
|
3. cardE1T1(2) - Indicates that the actual ASMi52 type is cardE1T1.
|
|
4. cardDataE1(3) - Indicates that the actual ASMi52 type is cardDataE1.
|
|
5. cardEthernet(4) - Indicates that the actual ASMi52 type is cardEthernet.
|
|
6. cardDataEthernet(5) - Indicates that the actual ASMi52 type is cardDataEthernet.
|
|
7. cardE1T1Ethernet(6) - Indicates that the actual ASMi52 type is cardE1T1Ethernet.
|
|
8. cardDataE1T1Ethernet(7) - Indicates that the actual ASMi52 type is cardDataE1T1Ethernet.
|
|
9. cardDataEthm(9) - Indicates that the actual ASMi52 type is cardDataEthm.
|
|
10. cardE1T1Ethm(10) - Indicates that the actual ASMi52 type is cardE1T1Ethm.
|
|
11. cardDataE1Ethm(11) - Indicates that the actual ASMi52 type is cardDataE1Ethm.
|
|
12. cardEthernetEthm(12) - Indicates that the actual ASMi52 type is cardEthernetEthm.
|
|
13. cardDataEthernetEthm(13) - Indicates that the actual ASMi52 type is cardDataEthernetEthm.
|
|
14. cardE1T1EthernetEthm(14) - Indicates that the actual ASMi52 type is cardE1T1EthernetEthm.
|
|
15. cardDataE1T1EthernetEthm(15) - Indicates that the actual ASMi52 type is cardDataE1T1EthernetEthm.
|
|
"
|
|
::= { hwTdmModemInfoEntry 4 }
|
|
|
|
hwTdmModemInfoHwVer OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the display string of the modem
|
|
hardware version."
|
|
::= { hwTdmModemInfoEntry 5 }
|
|
|
|
hwTdmModemInfoSwVer OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display String of the modem software version.
|
|
Examples: 2.23A8 3.4"
|
|
::= { hwTdmModemInfoEntry 6 }
|
|
|
|
hwTdmModemSupportEOC OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the port supports the EOC or not.
|
|
Options:
|
|
1. yes(1) - Indicates that the port supports the EOC.
|
|
2. no(2) - Indicates that the port does not support the EOC.
|
|
"
|
|
::= { hwTdmModemInfoEntry 7 }
|
|
|
|
hwTdmModemLowerSpeedOper OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
yes(1),
|
|
no(2),
|
|
na(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the modem run in lower speed or not.
|
|
When you download file with V35 MODEM , it must be yes.If it is not,
|
|
you can change it by reseting to factory or default configuration. In
|
|
the case of E1 MODEM, it will return NA.
|
|
Options:
|
|
1. yes(1) - Indicates that the modem run in lower speed.
|
|
2. no(2) - Indicates that the modem does not run in lower speed.
|
|
3. na(3) - NA.
|
|
"
|
|
::= { hwTdmModemInfoEntry 8 }
|
|
|
|
hwTdmModemDtePortState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
connect(1),
|
|
disconnect(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the down port state.
|
|
Options:
|
|
1. connect(1) - Indicates that the down port connected.
|
|
2. disconnect(2) - Indicates that the down port disconnected.
|
|
"
|
|
::= { hwTdmModemInfoEntry 9 }
|
|
|
|
hwTdmModemE1PortState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
connect(1),
|
|
disconnect(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the down port state.
|
|
Options:
|
|
1. connect(1) - Indicates that the down port connected.
|
|
2. disconnect(2) - Indicates that the down port disconnected.
|
|
"
|
|
::= { hwTdmModemInfoEntry 10 }
|
|
|
|
--
|
|
-- ASMi52A Modem Configuration Table
|
|
--
|
|
hwTdmModemConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmModemConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM
|
|
Modem configuration that may be used with G.SHDSL modem for
|
|
configuration. This information describe the alarm report
|
|
mask, the port status report mask, the reset command, the
|
|
switch to clear the alarm buffer, the switch to clear
|
|
statistics of the selected port, test time out and test command.
|
|
The index of this table is ifIndex."
|
|
::= { hwTdmModemObjects 2 }
|
|
|
|
hwTdmModemConfEntry OBJECT-TYPE
|
|
SYNTAX HwTdmModemConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM
|
|
Modem configuration that may be used with G.SHDSL modem for
|
|
configuration. This information describe the alarm report
|
|
mask, the port status report mask, the reset command, the
|
|
switch to clear the alarm buffer, the switch to clear
|
|
statistics of the selected port, test time out and test command.
|
|
The index of this entry is ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { hwTdmModemConfTable 1 }
|
|
|
|
HwTdmModemConfEntry ::=
|
|
SEQUENCE {
|
|
hwTdmModemConfAlarmAndPortMask
|
|
INTEGER,
|
|
-- hwTdmModemConfPerformanceMask
|
|
-- INTEGER,
|
|
hwTdmModemConfReset
|
|
INTEGER,
|
|
hwTdmModemAlrBufClear
|
|
INTEGER,
|
|
hwTdmModemStatClear
|
|
INTEGER,
|
|
hwTdmModemAlarmDevSeverity
|
|
OCTET STRING,
|
|
hwTdmModemAlarmPortSeverity
|
|
OCTET STRING
|
|
-- hwTdmModemTestTimeout
|
|
-- Integer32,
|
|
-- hwTdmModemTestCmd
|
|
-- INTEGER
|
|
}
|
|
|
|
hwTdmModemConfAlarmAndPortMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
majorAlarmMask(1),
|
|
minorAlarmMask(2),
|
|
portMask(3),
|
|
majorAndMinorMask(4),
|
|
majorAndPortMask(5),
|
|
minorAndPortMask(6),
|
|
allMask(7),
|
|
noMask(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This value identifies the alarm and port status report mask of the TDM remote modem in
|
|
the far-end side.
|
|
Options:
|
|
1. majorAlarmMask(1) - Indicates that mask is majorAlarmMask.
|
|
2. minorAlarmMask(2) - Indicates that mask is minorAlarmMask.
|
|
3. portMask(3) - Indicates that mask is portMask.
|
|
4. majorAndMinorMask(4) - Indicates that mask is majorAndMinorMask.
|
|
5. majorAndPortMask(5) - Indicates that mask is majorAndPortMask.
|
|
6. minorAndPortMask(6) - Indicates that mask is minorAndPortMask.
|
|
7. allMask(7) - Indicates that mask is allMask.
|
|
8. noMask(8) - Indicates that mask is noMask.
|
|
"
|
|
DEFVAL { minorAndPortMask }
|
|
::= { hwTdmModemConfEntry 1 }
|
|
|
|
-- hwTdmModemConfPerformanceMask OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- on(1),
|
|
-- off(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This value identifies the performance report mask of the TDM remote modem
|
|
-- in the far-end side. "
|
|
-- DEFVAL { off }
|
|
-- ::= { hwTdmModemConfEntry 3 }
|
|
|
|
hwTdmModemConfReset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(2),
|
|
resetToFactory(3),
|
|
deviceReset(4),
|
|
lineReset(5),
|
|
resetConfigwoMng(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value identifies the reset command of the TDM remote modem in the
|
|
far-end side. Changing this value can reset the device or the line, or
|
|
set the configuration to factory setting.
|
|
reset_config_wo_mng :set all parameters to default , instead of parameters of management : IP_address, IP_mask and etc
|
|
Options:
|
|
1. off(2) - Indicates that do nothing.
|
|
2. resetToFactory(3) - Indicates that reset to factory.
|
|
3. deviceReset(4) - Indicates that device reset.
|
|
4. lineReset(5) - Indicates that line reset.
|
|
5. resetConfigwoMng(6) - Indicates that set all parameters to default.
|
|
"
|
|
DEFVAL { off }
|
|
::= { hwTdmModemConfEntry 2 }
|
|
|
|
hwTdmModemAlrBufClear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the switch to clear the Alarm buffer
|
|
in the remote modem.
|
|
Options:
|
|
1. on(1) - Indicates that the switch is on.
|
|
2. off(2) - Indicates that the switch is off.
|
|
"
|
|
DEFVAL { off }
|
|
::= { hwTdmModemConfEntry 3 }
|
|
|
|
hwTdmModemStatClear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
clearSHDSLA(2),
|
|
clearSHDSLB(3),
|
|
clearE1(4),
|
|
clearAll(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates resetting statistics of the selected port.
|
|
Options:
|
|
1. none(1) - Indicates that do nothing.
|
|
2. clearSHDSLA(2) - Indicates that clear SHDSLA statistics.
|
|
3. clearSHDSLB(3) - Indicates that clear SHDSLB statistics.
|
|
4. clearE1(4) - Indicates that clear E1 statistics.
|
|
5. clearAll(5) - Indicates that clear all statistics.
|
|
"
|
|
DEFVAL { none }
|
|
::= { hwTdmModemConfEntry 4 }
|
|
|
|
hwTdmModemAlarmDevSeverity OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(2))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the alarms severity device bit
|
|
mapping. "
|
|
::= { hwTdmModemConfEntry 5 }
|
|
|
|
hwTdmModemAlarmPortSeverity OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(12))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the alarms severity port bit
|
|
mapping. "
|
|
::= { hwTdmModemConfEntry 6 }
|
|
|
|
-- hwTdmModemTestTimeout OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0..4095)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object is applicable only when a single test is
|
|
-- running. It indicates the test activation timeout in
|
|
-- minutes. When the timeout expires, the test is stopped.
|
|
-- Value of 0 indicates test may run Forever."
|
|
-- DEFVAL { 0 }
|
|
-- ::= { hwTdmModemConfEntry 7 }
|
|
|
|
-- hwTdmModemTestCmd OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- stop(1),
|
|
-- rlbOnly(2),
|
|
-- llbOnly(3),
|
|
-- rlbAndLlb(4),
|
|
-- reserved(5)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Setting this object to a value as detailed further on
|
|
-- will initiate a test on the specific port.
|
|
--
|
|
-- The terminology and order of the first tests is according
|
|
-- to the one used for Test Status of DS1 and DS3 standards.
|
|
-- The notations : RLB, LLB, DIG are the most used in RAD's
|
|
-- products, but they can be different. For exact definition
|
|
-- see product's spec.
|
|
--
|
|
-- Setting this object to stop (value=1), will stop all the
|
|
-- user requested tests running on the selected port.
|
|
--
|
|
-- When no test is running on the port, the Get value (test status)
|
|
-- will be stop(1).
|
|
--
|
|
-- PayloadLoop=RLB (Remote Loopback)
|
|
-- The received signal at this interface is looped
|
|
-- through the device. Typically the received signal
|
|
-- is looped back for retransmission after it has
|
|
-- passed through the device's framing function.
|
|
--
|
|
-- InwardLoop=LLB (Local Loopback)
|
|
-- The sent signal at this interface is looped back
|
|
-- through the device."
|
|
-- DEFVAL { stop }
|
|
-- ::= { hwTdmModemConfEntry 8 }
|
|
|
|
|
|
--
|
|
-- ASMi52A Modem Alarm Buffer Table
|
|
--
|
|
hwTdmModemAlarmBufTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmModemAlarmBufEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about
|
|
a TDM Modem alarm buffer that may be used for NMS polling.
|
|
This information describe the alarm buffer index, the
|
|
status of the alarm and severity of the alarm.The indexes
|
|
of this table are ifIndex, hwTdmModemAlarmBufIndex."
|
|
::= { hwTdmModemObjects 3 }
|
|
|
|
hwTdmModemAlarmBufEntry OBJECT-TYPE
|
|
SYNTAX HwTdmModemAlarmBufEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about
|
|
a TDM Modem alarm buffer that may be used for NMS polling.
|
|
This information describe the alarm buffer index, the
|
|
status of the alarm and severity of the alarm.The indexes
|
|
of this entry are ifIndex, hwTdmModemAlarmBufIndex."
|
|
INDEX { ifIndex, hwTdmModemAlarmBufIndex }
|
|
::= { hwTdmModemAlarmBufTable 1 }
|
|
|
|
HwTdmModemAlarmBufEntry ::=
|
|
SEQUENCE {
|
|
hwTdmModemAlarmBufIndex
|
|
Integer32,
|
|
hwTdmModemAlarmBufCode
|
|
Integer32,
|
|
hwTdmModemAlarmBufState
|
|
INTEGER,
|
|
hwTdmModemAlarmBufSeverity
|
|
INTEGER
|
|
}
|
|
|
|
hwTdmModemAlarmBufIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the alarm buffer index in the modem."
|
|
::= { hwTdmModemAlarmBufEntry 1 }
|
|
|
|
hwTdmModemAlarmBufCode OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The code of the alarm. For text description of each Alarm
|
|
code see Modem's specification."
|
|
::= { hwTdmModemAlarmBufEntry 2 }
|
|
|
|
hwTdmModemAlarmBufState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The new status of the alarm.
|
|
Options:
|
|
1. on(1) - Indicates that the alarm is on.
|
|
2. off(2) - Indicates that the alarm is off.
|
|
"
|
|
::= { hwTdmModemAlarmBufEntry 3 }
|
|
|
|
hwTdmModemAlarmBufSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
major(1),
|
|
minor(2),
|
|
warning(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity of the alarm.
|
|
Options:
|
|
1. major(1) - Indicates that the alarm is major.
|
|
2. minor(2) - Indicates that the alarm is minor.
|
|
3. warning(3) - Indicates that the alarm is warning.
|
|
"
|
|
::= { hwTdmModemAlarmBufEntry 4 }
|
|
|
|
--
|
|
-- ASMi52A SHDSL Port Configuration Table
|
|
--
|
|
hwTdmShdslConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmShdslConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the information about a TDM Modem SHDSL
|
|
port configuration. This information describe the SHDSL port
|
|
index, power backoff mode, worst case target SNR margin,
|
|
current condition target SNR margin, PSD (Power Spectral
|
|
Density) Mask, line probe mode, the loop attenuation alarm
|
|
threshold, the SNR margin alarm threshold ,the line wiring,
|
|
the test timeout and test cmd.The index of this table is ifIndex."
|
|
::= { hwTdmPortConfObjects 1 }
|
|
|
|
hwTdmShdslConfEntry OBJECT-TYPE
|
|
SYNTAX HwTdmShdslConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the information about a TDM Modem SHDSL
|
|
port configuration. This information describe the SHDSL port
|
|
index, power backoff mode, worst case target SNR margin,
|
|
current condition target SNR margin, PSD (Power Spectral
|
|
Density) Mask, line probe mode, the loop attenuation alarm
|
|
threshold, the SNR margin alarm threshold ,the line wiring,
|
|
the test timeout and test cmd.The index of this entry is ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { hwTdmShdslConfTable 1 }
|
|
|
|
HwTdmShdslConfEntry ::=
|
|
SEQUENCE {
|
|
hwTdmShdslConfPowerBackOff
|
|
INTEGER,
|
|
hwTdmShdslConfWorstCaseSNRMargin
|
|
Integer32,
|
|
hwTdmShdslConfCurrentSNRMargin
|
|
Integer32,
|
|
hwTdmShdslConfPSD
|
|
INTEGER,
|
|
hwTdmShdslConfLineProbe
|
|
INTEGER,
|
|
hwTdmShdslConfThreshLoopAttenuation
|
|
Integer32,
|
|
hwTdmShdslConfThreshSNRMargin
|
|
Integer32,
|
|
hwTdmShdslConfWireInterface
|
|
INTEGER,
|
|
hwTdmShdslConfTestTimeout
|
|
Integer32,
|
|
hwTdmShdslConfTestCmd
|
|
INTEGER
|
|
}
|
|
|
|
hwTdmShdslConfPowerBackOff OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the receiver at the associated
|
|
segment endpoint to operate in power backoff mode.
|
|
Options:
|
|
1. enable(1) - Indicates that enable the function.
|
|
2. disable(2) - Indicates that disable the function.
|
|
"
|
|
::= { hwTdmShdslConfEntry 1 }
|
|
|
|
hwTdmShdslConfWorstCaseSNRMargin OBJECT-TYPE
|
|
SYNTAX Integer32 (-10..11)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the upstream worst case target SNR
|
|
margin for a SHDSL line. The SNR margin is the difference
|
|
between the desired SNR and the actual SNR. Target SNR
|
|
margin is the desired SNR margin for a unit.
|
|
The normal value is from -10 to 10 , 11 means DSP chip
|
|
HANDSHAKE not used this parameters"
|
|
::= { hwTdmShdslConfEntry 2 }
|
|
|
|
hwTdmShdslConfCurrentSNRMargin OBJECT-TYPE
|
|
SYNTAX Integer32 (-10..11)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the upstream current condition
|
|
target SNR margin for a SHDSL line. The SNR margin is the
|
|
difference between the desired SNR and the actual SNR.
|
|
Target SNR margin is the desired SNR margin for a unit.
|
|
The normal value is from -10 to 10 , 11 means DSP chip
|
|
HANDSHAKE not used this parameters"
|
|
::= { hwTdmShdslConfEntry 3 }
|
|
|
|
hwTdmShdslConfPSD OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
asymDisable(0),
|
|
asymEnable(1),
|
|
r1AsymEnable(2),
|
|
r2AsymEnable(3),
|
|
asymSymEnable(4),
|
|
psdUnknown(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures use of symmetric/asymmetric PSD
|
|
(Power Spectral Density) Mask for the associated SHDSL Line.
|
|
Support for symmetric PSD is mandatory for all supported
|
|
data rates. Support for asymmetric PSD is optional.
|
|
Options:
|
|
1. asymDisable(0) - Indicates that PSD asymmetric disable.
|
|
2. asymEnable(1) - Indicates that PSD asymmetric enable.
|
|
3. r1AsymEnable(2) - Indicates that PSD r1 asymmetric enable.
|
|
4. r2AsymEnable(3) - Indicates that PSD r2 asymmetric enable.
|
|
5. asymSymEnable(4) - Indicates that PSD asymmetric and symmetric enable.
|
|
6. psdUnknown(5) - Indicates that PSD unknown.
|
|
"
|
|
::= { hwTdmShdslConfEntry 4 }
|
|
|
|
hwTdmShdslConfLineProbe OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables/disables support for Line Probe of
|
|
the units in a SHDSL line. When Line Probe is enabled,
|
|
the system performs Line Probing to find the best possible
|
|
rate (adaptive rate). If Line probe is disabled, the rate
|
|
adaptation phase is skipped to shorten set up time
|
|
(fixed rate).
|
|
Options:
|
|
1. enable(1) - Indicates that enable the function.
|
|
2. disable(2) - Indicates that disable the function.
|
|
"
|
|
::= { hwTdmShdslConfEntry 5 }
|
|
|
|
hwTdmShdslConfThreshLoopAttenuation OBJECT-TYPE
|
|
SYNTAX Integer32 (0..127)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the loop attenuation alarm threshold."
|
|
DEFVAL { 0 }
|
|
::= { hwTdmShdslConfEntry 6 }
|
|
|
|
hwTdmShdslConfThreshSNRMargin OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the SNR margin alarm threshold."
|
|
DEFVAL { 0 }
|
|
::= { hwTdmShdslConfEntry 7 }
|
|
|
|
hwTdmShdslConfWireInterface OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
twoWire(1),
|
|
fourWire(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the two-wire or optional four-wire
|
|
operation for SHDSL Lines.
|
|
Options:
|
|
1. twoWire(1) - Indicates that the operation for SHDSL Lines is two-wire.
|
|
2. fourWire(2) - Indicates that the operation for SHDSL Lines is four-wire.
|
|
"
|
|
DEFVAL { twoWire }
|
|
::= { hwTdmShdslConfEntry 8 }
|
|
|
|
hwTdmShdslConfTestTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is applicable only when a single test is
|
|
running. It indicates the test activation timeout in
|
|
minutes. When the timeout expires, the test is stopped.
|
|
Value of 0 indicates test may run Forever."
|
|
DEFVAL { 5 }
|
|
::= { hwTdmShdslConfEntry 9 }
|
|
|
|
hwTdmShdslConfTestCmd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
stop(1),
|
|
gsrLb(2),
|
|
dteRlb(3),
|
|
e1Rlb(4),
|
|
otherloop(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to a value as detailed further on
|
|
will initiate a test on the specific port.
|
|
|
|
The terminology and order of the first tests is according
|
|
to the one used for Test Status of DS1 and DS3 standards.
|
|
The notations : RLB, LLB, DIG are the most used in RAD's
|
|
products, but they can be different. For exact definition
|
|
see product's spec.
|
|
|
|
Setting this object to stop (value=1), will stop all the
|
|
user requested tests running on the selected port.
|
|
|
|
When no test is running on the port, the Get value (test status)
|
|
will be stop(1).
|
|
|
|
PayloadLoop=RLB (Remote Loopback)
|
|
The received signal at this interface is looped
|
|
through the device. Typically the received signal
|
|
is looped back for retransmission after it has
|
|
passed through the device's framing function.
|
|
|
|
InwardLoop=LLB (Local Loopback)
|
|
The sent signal at this interface is looped back
|
|
through the device.
|
|
|
|
Options:
|
|
1. stop(1) - Indicates that stop all the user requested tests running on the selected port.
|
|
2. gsrLb(2) - Indicates that initiate gsrLb test.
|
|
3. dteRlb(3) - Indicates that initiate dteRlb test .
|
|
4. e1Rlb(4) - Indicates that initiate e1Rlb test.
|
|
5. otherloop(5) - Indicates that initiate otherloop test.
|
|
"
|
|
DEFVAL { stop }
|
|
::= { hwTdmShdslConfEntry 10 }
|
|
|
|
--
|
|
-- ASMi52A E1/T1 Port Configuration Table
|
|
--
|
|
hwTdmE1ConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmE1ConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a
|
|
TDM Modem E1 port configuration. This information describe
|
|
the E1 port index, line type, sync, idelcode and crc4 value.
|
|
The index of this table is ifIndex."
|
|
::= { hwTdmPortConfObjects 2 }
|
|
|
|
hwTdmE1ConfEntry OBJECT-TYPE
|
|
SYNTAX HwTdmE1ConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a
|
|
TDM Modem E1 port configuration. This information describe
|
|
the E1 port index, line type, sync, idelcode and crc4 value.
|
|
The index of this entry is ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { hwTdmE1ConfTable 1 }
|
|
|
|
HwTdmE1ConfEntry ::=
|
|
SEQUENCE {
|
|
hwTdmE1ConfLineType
|
|
INTEGER,
|
|
hwTdmE1ConfSync
|
|
INTEGER,
|
|
hwTdmE1ConfIdleCode
|
|
Integer32,
|
|
hwTdmE1ConfCrc4
|
|
INTEGER
|
|
}
|
|
|
|
hwTdmE1ConfLineType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
esf(0),
|
|
d4(1),
|
|
e1(2),
|
|
e1MF(3),
|
|
unframed(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the variety of T1/E1
|
|
Line implementing this circuit. The type of
|
|
circuit affects the number of bits per second
|
|
that the circuit can reasonably carry, as well
|
|
as the interpretation of the usage and error
|
|
statistics. The values, in sequence, describe:
|
|
|
|
TITLE: SPECIFICATION:
|
|
esf Extended SuperFrame DS1
|
|
d4 AT&T D4 format DS1 - SF
|
|
e1 CCITT Recommendation G.704
|
|
(Table 4a) - G732N
|
|
e1MF G.704 (Table 4a) with TS16
|
|
multiframing enabled - G732S
|
|
unframed
|
|
Options:
|
|
1. esf(0) - Indicates that the variety is esf.
|
|
2. d4(1) - Indicates that the variety is d4.
|
|
3. e1(2) - Indicates that the variety is e1.
|
|
4. e1MF(3) - Indicates that the variety is e1MF.
|
|
5. unframed(4) - Indicates that the variety is unframed.
|
|
"
|
|
|
|
::= { hwTdmE1ConfEntry 1 }
|
|
|
|
hwTdmE1ConfSync OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fast(1),
|
|
tr62411(2),
|
|
ccitt(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables returning to normal operation, after
|
|
the end of a main/sub link red alarm event, in reduced time.
|
|
'tr62411' - complies with AT&T TR-62411 (after 10 seconds).
|
|
Applicable for both T1 and E1 interfaces.
|
|
'ccitt' - complies with CCITT standard. Applicable only
|
|
for E1 interfaces.
|
|
'fast' - after 1 second.
|
|
|
|
Options:
|
|
1. fast(1) - Indicates that return to normal operation in fast mode.
|
|
2. tr62411(2) - Indicates that return to normal operation in tr62411 mode.
|
|
3. ccitt(3) - Indicates that return to normal operation in ccitt mode.
|
|
"
|
|
::= { hwTdmE1ConfEntry 2 }
|
|
|
|
hwTdmE1ConfIdleCode OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object selects the code transmitted to fill idle
|
|
(unused) time slots in the main link frame.
|
|
Valid range: (0 - FF HEX)."
|
|
::= { hwTdmE1ConfEntry 3 }
|
|
|
|
-- hwTdmE1ConfSameFeCnfg OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- notApplicable(1),
|
|
-- no(2),
|
|
-- yes(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This parameter indicates whether the same E1 configuration
|
|
-- parameters and TS assignment are set both to the local
|
|
-- and remote device.
|
|
-- Read-Write access is applicable only in G732N framed mode.
|
|
-- For G732S and UNFRAMED this parameter is set by
|
|
-- agent to YES and is Read Only.
|
|
-- In Case of conflict during power-up between the central
|
|
-- and remote, the value set by the central unit is the valid one."
|
|
-- ::= { hwTdmE1ConfEntry 4 }
|
|
|
|
hwTdmE1ConfCrc4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter indicates whether the CRC-4 is set to the
|
|
local and remote device.
|
|
Options:
|
|
1. yes(1) - Indicates that set CRC-4.
|
|
2. no(2) - Indicates that no set CRC-4.
|
|
"
|
|
DEFVAL { no }
|
|
::= { hwTdmE1ConfEntry 4 }
|
|
|
|
--
|
|
-- ASMi52A DTE Port Configuration Table
|
|
--
|
|
hwTdmDTEConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmDTEConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the information about a TDM Modem DTE
|
|
port configuration. This information describe the DTE port
|
|
index, local analog loop-back switch, remote loop-back
|
|
switch, and Ir rate.The index of this table is ifIndex."
|
|
::= { hwTdmPortConfObjects 3 }
|
|
|
|
hwTdmDTEConfEntry OBJECT-TYPE
|
|
SYNTAX HwTdmDTEConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the information about a TDM Modem DTE
|
|
port configuration. This information describe the DTE port
|
|
index, local analog loop-back switch, remote loop-back
|
|
switch, and Ir rate.The index of this entry is ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { hwTdmDTEConfTable 1 }
|
|
|
|
HwTdmDTEConfEntry ::=
|
|
SEQUENCE {
|
|
hwTdmDTEConfLlbEnable
|
|
INTEGER,
|
|
hwTdmDTEConfRlbEnable
|
|
INTEGER,
|
|
hwTdmDTEConfIrRate
|
|
INTEGER
|
|
}
|
|
|
|
hwTdmDTEConfLlbEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable local Analog Loop-Back on this modem,
|
|
externally initiated.
|
|
Options:
|
|
1. enable(1) - Indicates that enable the function.
|
|
2. disable(2) - Indicates that disable the function.
|
|
"
|
|
::= { hwTdmDTEConfEntry 1 }
|
|
|
|
hwTdmDTEConfRlbEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable Remote Loop-Back on this modem, externally
|
|
initiated.
|
|
Options:
|
|
1. enable(1) - Indicates that enable the function.
|
|
2. disable(2) - Indicates that disable the function.
|
|
"
|
|
::= { hwTdmDTEConfEntry 2 }
|
|
|
|
|
|
|
|
hwTdmDTEConfIrRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
r64Kbps(1),
|
|
r128Kbps(2),
|
|
r192Kbps(3),
|
|
r256Kbps(4),
|
|
r320Kbps(5),
|
|
r384Kbps(6),
|
|
r448Kbps(7),
|
|
r512Kbps(8),
|
|
r576Kbps(9),
|
|
r640Kbps(10),
|
|
r704Kbps(11),
|
|
r768Kbps(12),
|
|
r832Kbps(13),
|
|
r896Kbps(14),
|
|
r960Kbps(15),
|
|
r1024Kbps(16),
|
|
r1088Kbps(17),
|
|
r1152Kbps(18),
|
|
r1216Kbps(19),
|
|
r1280Kbps(20),
|
|
r1344Kbps(21),
|
|
r1408Kbps(22),
|
|
r1472Kbps(23),
|
|
r1536Kbps(24),
|
|
r1600Kbps(25),
|
|
r1664Kbps(26),
|
|
r1728Kbps(27),
|
|
r1792Kbps(28),
|
|
r1856Kbps(29),
|
|
r1920Kbps(30),
|
|
r1984Kbps(31),
|
|
r2048Kbps(32),
|
|
r2112Kbps(33),
|
|
r2176Kbps(34),
|
|
r2240Kbps(35),
|
|
r2304Kbps(36),
|
|
r2432Kbps(37),
|
|
r2560Kbps(38),
|
|
r2688Kbps(39),
|
|
r2816Kbps(40),
|
|
r2944Kbps(41),
|
|
r3072Kbps(42),
|
|
r3200Kbps(43),
|
|
r3328Kbps(44),
|
|
r3456Kbps(45),
|
|
r3584Kbps(46),
|
|
r3712Kbps(47),
|
|
r3840Kbps(48),
|
|
r3968Kbps(49),
|
|
r4096Kbps(50),
|
|
r4224Kbps(51),
|
|
r4352Kbps(52),
|
|
r4480Kbps(53),
|
|
r4608Kbps(54),
|
|
notApplicable(255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the DTE port rate.for mux device.When modem is two_wire model,its
|
|
max supported value is 2048Kbps.
|
|
Options:
|
|
1, r64Kbps(1) - Indicates the DTE port rate is r64Kbps.
|
|
2, r128Kbps(2) - Indicates the DTE port rate is r128Kbps.
|
|
3, r192Kbps(3) - Indicates the DTE port rate is r192Kbps.
|
|
4, r256Kbps(4) - Indicates the DTE port rate is r256Kbps.
|
|
5, r320Kbps(5) - Indicates the DTE port rate is r320Kbps.
|
|
6, r384Kbps(6) - Indicates the DTE port rate is r384Kbps.
|
|
7, r448Kbps(7) - Indicates the DTE port rate is r448Kbps.
|
|
8, r512Kbps(8) - Indicates the DTE port rate is r512Kbps.
|
|
9, r576Kbps(9) - Indicates the DTE port rate is r576Kbps.
|
|
10, r640Kbps(10) - Indicates the DTE port rate is r640Kbps.
|
|
11, r704Kbps(11) - Indicates the DTE port rate is r704Kbps.
|
|
12, r768Kbps(12) - Indicates the DTE port rate is r768Kbps.
|
|
13, r832Kbps(13) - Indicates the DTE port rate is r832Kbps.
|
|
14, r896Kbps(14) - Indicates the DTE port rate is r896Kbps.
|
|
15, r960Kbps(15) - Indicates the DTE port rate is r960Kbps.
|
|
16, r1024Kbps(16) - Indicates the DTE port rate is r1024Kbps.
|
|
17, r1088Kbps(17) - Indicates the DTE port rate is r1088Kbps.
|
|
18, r1152Kbps(18) - Indicates the DTE port rate is r1152Kbps.
|
|
19, r1216Kbps(19) - Indicates the DTE port rate is r1216Kbps.
|
|
20, r1280Kbps(20) - Indicates the DTE port rate is r1280Kbps.
|
|
21, r1344Kbps(21) - Indicates the DTE port rate is r1344Kbps.
|
|
22, r1408Kbps(22) - Indicates the DTE port rate is r1408Kbps.
|
|
23, r1472Kbps(23) - Indicates the DTE port rate is r1472Kbps.
|
|
24, r1536Kbps(24) - Indicates the DTE port rate is r1536Kbps.
|
|
25, r1600Kbps(25) - Indicates the DTE port rate is r1600Kbps.
|
|
26, r1664Kbps(26) - Indicates the DTE port rate is r1664Kbps.
|
|
27, r1728Kbps(27) - Indicates the DTE port rate is r1728Kbps.
|
|
28, r1792Kbps(28) - Indicates the DTE port rate is r1792Kbps.
|
|
29, r1856Kbps(29) - Indicates the DTE port rate is r1856Kbps.
|
|
30, r1920Kbps(30) - Indicates the DTE port rate is r1920Kbps.
|
|
31, r1984Kbps(31) - Indicates the DTE port rate is r1984Kbps.
|
|
32, r2048Kbps(32) - Indicates the DTE port rate is r2048Kbps.
|
|
33, r2112Kbps(33) - Indicates the DTE port rate is r2112Kbps.
|
|
34, r2176Kbps(34) - Indicates the DTE port rate is r2176Kbps.
|
|
35, r2240Kbps(35) - Indicates the DTE port rate is r2240Kbps.
|
|
36, r2304Kbps(36) - Indicates the DTE port rate is r2304Kbps.
|
|
37, r2432Kbps(37) - Indicates the DTE port rate is r2432Kbps.
|
|
38, r2560Kbps(38) - Indicates the DTE port rate is r2560Kbps.
|
|
39, r2688Kbps(39) - Indicates the DTE port rate is r2688Kbps.
|
|
40, r2816Kbps(40) - Indicates the DTE port rate is r2816Kbps.
|
|
41, r2944Kbps(41) - Indicates the DTE port rate is r2944Kbps.
|
|
42, r3072Kbps(42) - Indicates the DTE port rate is r3072Kbps.
|
|
43, r3200Kbps(43) - Indicates the DTE port rate is r3200Kbps.
|
|
44, r3328Kbps(44) - Indicates the DTE port rate is r3328Kbps.
|
|
45, r3456Kbps(45) - Indicates the DTE port rate is r3456Kbps.
|
|
46, r3584Kbps(46) - Indicates the DTE port rate is r3584Kbps.
|
|
47, r3712Kbps(47) - Indicates the DTE port rate is r3712Kbps.
|
|
48, r3840Kbps(48) - Indicates the DTE port rate is r3840Kbps.
|
|
49, r3968Kbps(49) - Indicates the DTE port rate is r3968Kbps.
|
|
50, r4096Kbps(50) - Indicates the DTE port rate is r4096Kbps.
|
|
51, r4224Kbps(51) - Indicates the DTE port rate is r4224Kbps.
|
|
52, r4352Kbps(52) - Indicates the DTE port rate is r4352Kbps.
|
|
53, r4480Kbps(53) - Indicates the DTE port rate is r4480Kbps.
|
|
54, r4608Kbps(54) - Indicates the DTE port rate is r4608Kbps.
|
|
55, notApplicable(255) - Indicates the DTE port rate is notApplicable.
|
|
"
|
|
::= { hwTdmDTEConfEntry 3 }
|
|
|
|
-- ASMi52A G.SHDSL Port current statistics Table including 15 minute interval and 24 hour interval
|
|
|
|
hwTdmShdslCurrentStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmShdslCurrentStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM Modem SHDSL port
|
|
statistics including 15 minute and 1 day interval. This information describe
|
|
total elapsed seconds, the number of errored seconds, the number of unavailable
|
|
seconds, the number of severely errored seconds, the number of CRC anomalies,
|
|
the number of loss of sync word seconds.
|
|
The indexes of this table are ifIndex, hwTdmShdslLineIndex."
|
|
::= { hwTdmPortStatObjects 1 }
|
|
|
|
hwTdmShdslCurrentStatEntry OBJECT-TYPE
|
|
SYNTAX HwTdmShdslCurrentStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM Modem SHDSL port
|
|
statistics including 15 minute and 1 day interval. This information describe
|
|
total elapsed seconds, the number of errored seconds, the number of unavailable
|
|
seconds, the number of severely errored seconds, the number of CRC anomalies,
|
|
the number of loss of sync word seconds.
|
|
The indexes of this entry are ifIndex, hwTdmShdslLineIndex."
|
|
INDEX { ifIndex, hwTdmShdslLineIndex }
|
|
::= { hwTdmShdslCurrentStatTable 1 }
|
|
|
|
HwTdmShdslCurrentStatEntry ::=
|
|
SEQUENCE {
|
|
hwTdmShdslLineIndex
|
|
INTEGER,
|
|
hwTdmShdslCurrentTimeElapsed
|
|
Unsigned32,
|
|
hwTdmShdslCurrent15MinES
|
|
Gauge32,
|
|
hwTdmShdslCurrent15MinSES
|
|
Gauge32,
|
|
hwTdmShdslCurrent15MinCRCanomalies
|
|
Gauge32,
|
|
hwTdmShdslCurrent15MinLOSWS
|
|
Gauge32,
|
|
hwTdmShdslCurrent15MinUAS
|
|
Gauge32,
|
|
-- hwTdmShdslCurrent15MinLoswErrors
|
|
-- Gauge32,
|
|
hwTdmShdslCurrent1DayES
|
|
Gauge32,
|
|
hwTdmShdslCurrent1DaySES
|
|
Gauge32,
|
|
hwTdmShdslCurrent1DayCRCanomalies
|
|
Gauge32,
|
|
hwTdmShdslCurrent1DayLOSWS
|
|
Gauge32,
|
|
hwTdmShdslCurrent1DayUAS
|
|
Gauge32,
|
|
-- hwTdmShdslCurrent1DayLoswErrors
|
|
-- Gauge32,
|
|
hwTdmShdslCurrentSNRMargin
|
|
Integer32,
|
|
hwTdmShdslCurrentLoopAttenuation
|
|
Integer32,
|
|
-- hwTdmShdslCurrentRcvGain
|
|
-- Integer32,
|
|
hwTdmShdslCurrentTransPower
|
|
Integer32,
|
|
hwTdmShdslCurrentPowerBO
|
|
Integer32
|
|
}
|
|
|
|
hwTdmShdslLineIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lineA(1),
|
|
lineB(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the SHDSL line port index.
|
|
Options:
|
|
1. lineA(1) - Indicates the SHDSL line port index is lineA.
|
|
2. lineB(2) - Indicates the SHDSL line port index is lineB.
|
|
"
|
|
::= { hwTdmShdslCurrentStatEntry 1 }
|
|
|
|
hwTdmShdslCurrentTimeElapsed OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in the current interval."
|
|
::= { hwTdmShdslCurrentStatEntry 2 }
|
|
|
|
hwTdmShdslCurrent15MinES OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds (ES) in the current 15-minute interval."
|
|
::= { hwTdmShdslCurrentStatEntry 3 }
|
|
|
|
hwTdmShdslCurrent15MinSES OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Severely Errored Seconds (SES) in the current 15-minute interval.
|
|
when sync is off ,it may be 900"
|
|
::= { hwTdmShdslCurrentStatEntry 4 }
|
|
|
|
hwTdmShdslCurrent15MinCRCanomalies OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "detected CRC Anomalies"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of CRC anomalies in the current 15-minute interval."
|
|
::= { hwTdmShdslCurrentStatEntry 5 }
|
|
|
|
hwTdmShdslCurrent15MinLOSWS OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval."
|
|
::= { hwTdmShdslCurrentStatEntry 6 }
|
|
|
|
hwTdmShdslCurrent15MinUAS OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..900)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Unavailable Seconds (UAS) in the current 15-minute interval.
|
|
when sync is off ,it may be 900"
|
|
::= { hwTdmShdslCurrentStatEntry 7 }
|
|
|
|
-- hwTdmShdslCurrent15MinLoswErrors OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Count of LOSW errors in the current 15-minute interval."
|
|
-- ::= { hwTdmShdslCurrentStatEntry 8 }
|
|
|
|
hwTdmShdslCurrent1DayES OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds (ES) in the current day interval."
|
|
::= { hwTdmShdslCurrentStatEntry 8 }
|
|
|
|
hwTdmShdslCurrent1DaySES OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Severely Errored Seconds (SES) in the current day interval."
|
|
::= { hwTdmShdslCurrentStatEntry 9 }
|
|
|
|
hwTdmShdslCurrent1DayCRCanomalies OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "detected CRC Anomalies"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of CRC anomalies in the current day interval."
|
|
::= { hwTdmShdslCurrentStatEntry 10 }
|
|
|
|
hwTdmShdslCurrent1DayLOSWS OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Sync Word (LOSW) Seconds in the current day interval."
|
|
::= { hwTdmShdslCurrentStatEntry 11 }
|
|
|
|
hwTdmShdslCurrent1DayUAS OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Unavailable Seconds (UAS) in the current day interval."
|
|
::= { hwTdmShdslCurrentStatEntry 12 }
|
|
|
|
-- hwTdmShdslCurrent1DayLoswErrors OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Count of LOSW errors in the current 24-hour interval."
|
|
-- ::= { hwTdmShdslCurrentStatEntry 14 }
|
|
|
|
hwTdmShdslCurrentSNRMargin OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current SNR margin for this endpoint as reported in a
|
|
Status Response/SNR message."
|
|
::= { hwTdmShdslCurrentStatEntry 13 }
|
|
|
|
hwTdmShdslCurrentLoopAttenuation OBJECT-TYPE
|
|
SYNTAX Integer32 (0..127)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current loop attenuation for this endpoint as reported
|
|
in a Network or Customer Side Performance Status message."
|
|
::= { hwTdmShdslCurrentStatEntry 14 }
|
|
|
|
-- hwTdmShdslCurrentRcvGain OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- UNITS "dB"
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The current receive gain in hundredth of dB."
|
|
-- ::= { hwTdmShdslCurrentStatEntry 15 }
|
|
|
|
hwTdmShdslCurrentTransPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current transmit power in tenth of dBm."
|
|
::= { hwTdmShdslCurrentStatEntry 15 }
|
|
|
|
hwTdmShdslCurrentPowerBO OBJECT-TYPE
|
|
SYNTAX Integer32 (0..6)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current transceiver actual power packoff from 0dB to 6dB."
|
|
::= { hwTdmShdslCurrentStatEntry 16 }
|
|
|
|
--
|
|
-- ASMi52A G.SHDSL Port statistics Table in 15 minute interval
|
|
--
|
|
hwTdmShdslIntervalStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmShdslIntervalStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM Modem SHDSL port statistics
|
|
in 15 minute interval. This information describe the SHDSL port interval index, the number
|
|
of errored seconds, the number of unavailable seconds, the number of severely errored
|
|
seconds, the number of CRC anomalies and the number of loss of sync word seconds.
|
|
The indexes of this table are ifIndex, hwTdmShdslLineIndex, hwTdmShdslIntervalIndex."
|
|
::= { hwTdmPortStatObjects 2 }
|
|
|
|
hwTdmShdslIntervalStatEntry OBJECT-TYPE
|
|
SYNTAX HwTdmShdslIntervalStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM Modem SHDSL port statistics
|
|
in 15 minute interval. This information describe the SHDSL port interval index, the number
|
|
of errored seconds, the number of unavailable seconds, the number of severely errored
|
|
seconds, the number of CRC anomalies and the number of loss of sync word seconds.
|
|
The indexes of this entry are ifIndex, hwTdmShdslLineIndex, hwTdmShdslIntervalIndex."
|
|
INDEX { ifIndex, hwTdmShdslLineIndex, hwTdmShdslIntervalIndex }
|
|
::= { hwTdmShdslIntervalStatTable 1 }
|
|
|
|
HwTdmShdslIntervalStatEntry ::=
|
|
SEQUENCE {
|
|
hwTdmShdslIntervalIndex
|
|
Integer32,
|
|
hwTdmShdslIntervalES
|
|
Gauge32,
|
|
hwTdmShdslIntervalSES
|
|
Gauge32,
|
|
hwTdmShdslIntervalCRCanomalies
|
|
Gauge32,
|
|
hwTdmShdslIntervalLOSWS
|
|
Gauge32,
|
|
hwTdmShdslIntervalUAS
|
|
Gauge32
|
|
-- hwTdmShdslIntervalLoswErrors
|
|
-- Gauge32
|
|
}
|
|
|
|
hwTdmShdslIntervalIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the interval SHDSL port statistics index in the remote
|
|
modem."
|
|
::= { hwTdmShdslIntervalStatEntry 1 }
|
|
|
|
hwTdmShdslIntervalES OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds (ES) in 15-minute interval."
|
|
::= { hwTdmShdslIntervalStatEntry 2 }
|
|
|
|
hwTdmShdslIntervalSES OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Severely Errored Seconds (SES) in 15-minute interval.
|
|
when sync is off ,it may be 900"
|
|
::= { hwTdmShdslIntervalStatEntry 3 }
|
|
|
|
hwTdmShdslIntervalCRCanomalies OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "detected CRC Anomalies"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of CRC anomalies in 15-minute interval."
|
|
::= { hwTdmShdslIntervalStatEntry 4 }
|
|
|
|
hwTdmShdslIntervalLOSWS OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Sync Word (LOSW) Seconds in 15-minute interval."
|
|
::= { hwTdmShdslIntervalStatEntry 5 }
|
|
|
|
hwTdmShdslIntervalUAS OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Unavailable Seconds (UAS) in 15-minute interval.
|
|
when sync is off ,it may be 900"
|
|
::= { hwTdmShdslIntervalStatEntry 6 }
|
|
|
|
-- hwTdmShdslIntervalLoswErrors OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Count of LOSW errors in 15-minute interval."
|
|
-- ::= { hwTdmShdslIntervalStatEntry 7 }
|
|
|
|
--
|
|
-- ASMi52A G.SHDSL Port statistics Table in 1-day interval
|
|
--
|
|
hwTdmShdslTotalStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmShdslTotalStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM Modem SHDSL port statistics
|
|
in 1-day interval. This information describe the SHDSL port interval index, the number
|
|
of errored seconds, the number of unavailable seconds, the number of severely errored
|
|
seconds, the number of CRC anomalies and the number of loss of sync word seconds.
|
|
The indexes of this table are ifIndex, hwTdmShdslLineIndex, hwTdmShdslTotalIndex."
|
|
::= { hwTdmPortStatObjects 3 }
|
|
|
|
hwTdmShdslTotalStatEntry OBJECT-TYPE
|
|
SYNTAX HwTdmShdslTotalStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM Modem SHDSL port statistics
|
|
in 1-day interval. This information describe the SHDSL port interval index, the number
|
|
of errored seconds, the number of unavailable seconds, the number of severely errored
|
|
seconds, the number of CRC anomalies and the number of loss of sync word seconds.
|
|
The indexes of this entry are ifIndex, hwTdmShdslLineIndex, hwTdmShdslTotalIndex."
|
|
INDEX { ifIndex, hwTdmShdslLineIndex, hwTdmShdslTotalIndex }
|
|
::= { hwTdmShdslTotalStatTable 1 }
|
|
|
|
HwTdmShdslTotalStatEntry ::=
|
|
SEQUENCE {
|
|
hwTdmShdslTotalIndex
|
|
Integer32,
|
|
hwTdmShdslTotalES
|
|
Gauge32,
|
|
hwTdmShdslTotalSES
|
|
Gauge32,
|
|
hwTdmShdslTotalCRCanomalies
|
|
Gauge32,
|
|
hwTdmShdslTotalLOSWS
|
|
Gauge32,
|
|
hwTdmShdslTotalUAS
|
|
Gauge32
|
|
-- hwTdmShdslTotalLoswErrors
|
|
-- Gauge32
|
|
}
|
|
|
|
hwTdmShdslTotalIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the total SHDSL port statistics index in the remote
|
|
modem."
|
|
::= { hwTdmShdslTotalStatEntry 1 }
|
|
|
|
hwTdmShdslTotalES OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86304)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds (ES) in 1-day interval."
|
|
::= { hwTdmShdslTotalStatEntry 2 }
|
|
|
|
hwTdmShdslTotalSES OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Severely Errored Seconds (SES) in 1-day interval."
|
|
::= { hwTdmShdslTotalStatEntry 3 }
|
|
|
|
hwTdmShdslTotalCRCanomalies OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "detected CRC Anomalies"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of CRC anomalies in 1-day interval."
|
|
::= { hwTdmShdslTotalStatEntry 4 }
|
|
|
|
hwTdmShdslTotalLOSWS OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86304)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Sync Word (LOSW) Seconds in 1-day interval."
|
|
::= { hwTdmShdslTotalStatEntry 5 }
|
|
|
|
hwTdmShdslTotalUAS OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Unavailable Seconds (UAS) in 1-day interval."
|
|
::= { hwTdmShdslTotalStatEntry 6 }
|
|
|
|
-- hwTdmShdslTotalLoswErrors OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Count of LOSW errors in 1-day interval."
|
|
-- ::= { hwTdmShdslTotalStatEntry 7 }
|
|
|
|
--
|
|
-- ASMi52A E1 Port statistics in current 15 minute interval Table
|
|
--
|
|
hwTdmE1CurrentStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmE1CurrentStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference
|
|
information about a TDM Modem E1 port statistics in current 15 minute interval.
|
|
This information describe the E1 port current interval index, the number of
|
|
BPV (BiPolar Violation) events detected during the last minute, the maximal
|
|
number of BPV (BiPolar Violation) events (per minute) detected during the worst
|
|
minute, the number of CRC error events, the average number of CRC error events
|
|
per second, the number of errored seconds, the number of unavailable seconds,
|
|
the number of severely errored seconds, the number of bursty errored seconds,
|
|
the number of loss of frame events, the number of controlled slip seconds, the
|
|
number of degraded minutes and the number of seconds that have elapsed since the
|
|
beginning of the near end current error- measurement period.
|
|
The index of this table is ifIndex."
|
|
::= { hwTdmPortStatObjects 4 }
|
|
|
|
hwTdmE1CurrentStatEntry OBJECT-TYPE
|
|
SYNTAX HwTdmE1CurrentStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference
|
|
information about a TDM Modem E1 port statistics in current 15 minute interval.
|
|
This information describe the E1 port current interval index, the number of
|
|
BPV (BiPolar Violation) events detected during the last minute, the maximal
|
|
number of BPV (BiPolar Violation) events (per minute) detected during the worst
|
|
minute, the number of CRC error events, the average number of CRC error events
|
|
per second, the number of errored seconds, the number of unavailable seconds,
|
|
the number of severely errored seconds, the number of bursty errored seconds,
|
|
the number of loss of frame events, the number of controlled slip seconds, the
|
|
number of degraded minutes and the number of seconds that have elapsed since the
|
|
beginning of the near end current error- measurement period.
|
|
The index of this entry is ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { hwTdmE1CurrentStatTable 1 }
|
|
|
|
HwTdmE1CurrentStatEntry ::=
|
|
SEQUENCE {
|
|
hwTdmE1CurrentBpvLastMin
|
|
Gauge32,
|
|
hwTdmE1CurrentBpvMax
|
|
Gauge32,
|
|
hwTdmE1CurrentCRCErrorEvents
|
|
Gauge32,
|
|
hwTdmE1CurrentCRCAvgError
|
|
Gauge32,
|
|
hwTdmE1CurrentESs
|
|
Gauge32,
|
|
hwTdmE1CurrentUASs
|
|
Gauge32,
|
|
hwTdmE1CurrentSESs
|
|
Gauge32,
|
|
hwTdmE1CurrentBESs
|
|
Gauge32,
|
|
hwTdmE1CurrentLOFC
|
|
Gauge32,
|
|
hwTdmE1CurrentCSSs
|
|
Gauge32,
|
|
hwTdmE1CurrentDMs
|
|
Gauge32,
|
|
hwTdmE1TimeElapsed
|
|
Gauge32
|
|
}
|
|
|
|
hwTdmE1CurrentBpvLastMin OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the number of BPV (BiPolar Violation) events detected during
|
|
the last minute."
|
|
::= { hwTdmE1CurrentStatEntry 1 }
|
|
|
|
hwTdmE1CurrentBpvMax OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..1000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the maximal number of BPV (BiPolar Violation) events (per minute)
|
|
detected during the worst minute."
|
|
::= { hwTdmE1CurrentStatEntry 2 }
|
|
|
|
hwTdmE1CurrentCRCErrorEvents OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of CRC error events, encountered in the current 15 minute interval."
|
|
::= { hwTdmE1CurrentStatEntry 3 }
|
|
|
|
hwTdmE1CurrentCRCAvgError OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the average number of CRC error events per second. The average is updated every
|
|
second."
|
|
::= { hwTdmE1CurrentStatEntry 4 }
|
|
|
|
hwTdmE1CurrentESs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of errored seconds measured encountered in the current 15 minute
|
|
interval."
|
|
::= { hwTdmE1CurrentStatEntry 5 }
|
|
|
|
hwTdmE1CurrentUASs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..900)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of unavailable seconds measured encountered in the current 15 minute
|
|
interval."
|
|
::= { hwTdmE1CurrentStatEntry 6 }
|
|
|
|
hwTdmE1CurrentSESs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..900)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of severely errored seconds measured encountered in the current 15
|
|
minute interval."
|
|
::= { hwTdmE1CurrentStatEntry 7 }
|
|
|
|
hwTdmE1CurrentBESs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of bursty errored seconds measured encountered in the current 15
|
|
minute interval."
|
|
::= { hwTdmE1CurrentStatEntry 8 }
|
|
|
|
hwTdmE1CurrentLOFC OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of loss of frame events measured encountered in the current 15 minute
|
|
interval."
|
|
::= { hwTdmE1CurrentStatEntry 9 }
|
|
|
|
hwTdmE1CurrentCSSs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of controlled slip seconds measured encountered in the current 15 minute
|
|
interval."
|
|
::= { hwTdmE1CurrentStatEntry 10 }
|
|
|
|
hwTdmE1CurrentDMs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of degraded minutes measured encountered in the current 15 minute interval."
|
|
::= { hwTdmE1CurrentStatEntry 11 }
|
|
|
|
hwTdmE1TimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that have elapsed since the beginning of the near end current error-
|
|
measurement period. If, for some reason, such as an adjustment in the system's time-of-day
|
|
clock, the current interval exceeds the maximum value, the agent will return the maximum value."
|
|
::= { hwTdmE1CurrentStatEntry 12 }
|
|
|
|
--
|
|
-- ASMi52A E1 Port statistics in 15 minute interval Table
|
|
--
|
|
hwTdmE1IntervalStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmE1IntervalStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM Modem E1
|
|
port statistics in 15 minute interval. This information describe the
|
|
E1 port interval index, the number of errored seconds, the number of
|
|
unavailable seconds, the number of severely errored seconds, the number
|
|
of bursty errored seconds, the number of loss of frame events, the number
|
|
of controlled slip seconds and the number of degraded minutes.The indexes
|
|
of this table are ifIndex, hwTdmE1IntervalIndex."
|
|
::= { hwTdmPortStatObjects 5 }
|
|
|
|
hwTdmE1IntervalStatEntry OBJECT-TYPE
|
|
SYNTAX HwTdmE1IntervalStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the reference information about a TDM Modem E1
|
|
port statistics in 15 minute interval. This information describe the
|
|
E1 port interval index, the number of errored seconds, the number of
|
|
unavailable seconds, the number of severely errored seconds, the number
|
|
of bursty errored seconds, the number of loss of frame events, the number
|
|
of controlled slip seconds and the number of degraded minutes.The indexes
|
|
of this entry are ifIndex, hwTdmE1IntervalIndex."
|
|
INDEX { ifIndex, hwTdmE1IntervalIndex }
|
|
::= { hwTdmE1IntervalStatTable 1 }
|
|
|
|
HwTdmE1IntervalStatEntry ::=
|
|
SEQUENCE {
|
|
hwTdmE1IntervalIndex
|
|
Integer32,
|
|
hwTdmE1IntervalESs
|
|
Gauge32,
|
|
hwTdmE1IntervalUASs
|
|
Gauge32,
|
|
hwTdmE1IntervalSESs
|
|
Gauge32,
|
|
hwTdmE1IntervalBESs
|
|
Gauge32,
|
|
hwTdmE1IntervalLOFC
|
|
Gauge32,
|
|
hwTdmE1IntervalCSSs
|
|
Gauge32,
|
|
hwTdmE1IntervalDMs
|
|
Gauge32,
|
|
hwTdmE1TotalIntervalNum
|
|
Integer32,
|
|
hwTdmE1Interval1DayESs
|
|
Gauge32,
|
|
hwTdmE1Interval1DayUASs
|
|
Gauge32,
|
|
hwTdmE1Interval1DaySESs
|
|
Gauge32,
|
|
hwTdmE1Interval1DayBESs
|
|
Gauge32,
|
|
hwTdmE1Interval1DayLOFC
|
|
Gauge32,
|
|
hwTdmE1Interval1DayCSSs
|
|
Gauge32,
|
|
hwTdmE1Interval1DayDMs
|
|
Gauge32,
|
|
hwTdmE1Interval1DayDEGMinute
|
|
Gauge32
|
|
}
|
|
|
|
hwTdmE1IntervalIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the interval E1 port statistics index in the remote
|
|
modem."
|
|
::= { hwTdmE1IntervalStatEntry 1 }
|
|
|
|
hwTdmE1IntervalESs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of errored seconds measured encountered in 15 minute
|
|
interval."
|
|
::= { hwTdmE1IntervalStatEntry 2 }
|
|
|
|
hwTdmE1IntervalUASs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..900)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of unavailable seconds measured encountered in 15 minute
|
|
interval."
|
|
::= { hwTdmE1IntervalStatEntry 3 }
|
|
|
|
hwTdmE1IntervalSESs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..900)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of severely errored seconds measured encountered in 15
|
|
minute interval."
|
|
::= { hwTdmE1IntervalStatEntry 4 }
|
|
|
|
hwTdmE1IntervalBESs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of bursty errored seconds measured encountered in 15
|
|
minute interval."
|
|
::= { hwTdmE1IntervalStatEntry 5 }
|
|
|
|
hwTdmE1IntervalLOFC OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of loss of frame events measured encountered in 15 minute
|
|
interval."
|
|
::= { hwTdmE1IntervalStatEntry 6 }
|
|
|
|
hwTdmE1IntervalCSSs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of controlled slip seconds measured encountered in 15 minute
|
|
interval."
|
|
::= { hwTdmE1IntervalStatEntry 7 }
|
|
|
|
hwTdmE1IntervalDMs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of degraded minutes measured encountered in 15 minute interval."
|
|
::= { hwTdmE1IntervalStatEntry 8 }
|
|
|
|
hwTdmE1TotalIntervalNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value indicates the total number of E1 port statistics in 15 minute
|
|
interval in 24 hour statistics."
|
|
::= { hwTdmE1IntervalStatEntry 9 }
|
|
|
|
hwTdmE1Interval1DayESs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86304)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of Errored Seconds encountered by a E1 interface in the previous
|
|
24 hour interval."
|
|
::= { hwTdmE1IntervalStatEntry 10 }
|
|
|
|
hwTdmE1Interval1DayUASs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86400)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Unavailable Seconds encountered by a E1 interface in the
|
|
previous 24 hour interval."
|
|
::= { hwTdmE1IntervalStatEntry 11 }
|
|
|
|
hwTdmE1Interval1DaySESs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..86400)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Severely Errored Seconds encountered by a E1 interface in
|
|
the previous 24 hour interval. "
|
|
::= { hwTdmE1IntervalStatEntry 12 }
|
|
|
|
hwTdmE1Interval1DayBESs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Bursty Errored Seconds (BESs) encountered by a E1 interface
|
|
in the previous 24 hour interval."
|
|
::= { hwTdmE1IntervalStatEntry 13 }
|
|
|
|
hwTdmE1Interval1DayLOFC OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of loss of frame events encountered by a E1 interface in the
|
|
previous 24 hour interval."
|
|
::= { hwTdmE1IntervalStatEntry 14 }
|
|
|
|
hwTdmE1Interval1DayCSSs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Controlled Slip Seconds encountered by a E1 interface in the
|
|
previous 24 hour interval."
|
|
::= { hwTdmE1IntervalStatEntry 15 }
|
|
|
|
hwTdmE1Interval1DayDMs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Degraded Minutes (DMs) encountered by a E1 interface in the
|
|
previous 24 hour interval."
|
|
::= { hwTdmE1IntervalStatEntry 16 }
|
|
|
|
hwTdmE1Interval1DayDEGMinute OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DEG Minutes encountered by a E1 interface in the
|
|
previous 24 hour interval."
|
|
::= { hwTdmE1IntervalStatEntry 17 }
|
|
--
|
|
-- ASMi52A E1 Port statistics Table in 1 day interval
|
|
--
|
|
-- hwTdmE1TotalStatTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF HwTdmE1TotalStatEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The TDM Modem E1 port statistics Table in 1 day interval."
|
|
-- ::= { hwTdmPortStatObjects 6 }
|
|
|
|
-- hwTdmE1TotalStatEntry OBJECT-TYPE
|
|
-- SYNTAX HwTdmE1TotalStatEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in the TDM Modem E1 port statistics table describes the reference
|
|
-- information about a TDM Modem E1 port statistics in 24 hour interval.
|
|
-- This information describe the E1 port total index, the total number of E1
|
|
-- port statistics in 15 minute interval, the number of errored seconds, the
|
|
-- number of unavailable seconds, the number of severely errored seconds, the
|
|
-- number of bursty errored seconds, the number of loss of frame events, the
|
|
-- number of controlled slip seconds and the number of degraded minutes."
|
|
-- INDEX { ifIndex, hwTdmE1TotalIndex }
|
|
-- ::= { hwTdmE1TotalStatTable 1 }
|
|
|
|
-- HwTdmE1TotalStatEntry ::=
|
|
-- SEQUENCE {
|
|
-- hwTdmE1TotalIndex
|
|
-- INTEGER,
|
|
-- hwTdmE1TotalIntervalNum
|
|
-- INTEGER,
|
|
-- hwTdmE1TotalESs
|
|
-- Gauge32,
|
|
-- hwTdmE1TotalUASs
|
|
-- Gauge32,
|
|
-- hwTdmE1TotalSESs
|
|
-- Gauge32,
|
|
-- hwTdmE1TotalBESs
|
|
-- Gauge32,
|
|
-- hwTdmE1TotalLOFC
|
|
-- Gauge32,
|
|
-- hwTdmE1TotalCSSs
|
|
-- Gauge32,
|
|
-- hwTdmE1TotalDMs
|
|
-- Gauge32,
|
|
-- hwTdmE1TotalDEGMinute
|
|
-- Gauge32
|
|
-- }
|
|
|
|
-- hwTdmE1TotalIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..6)
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This value indicates the interval E1 port statistics index in the remote
|
|
-- modem."
|
|
-- ::= { hwTdmE1TotalStatEntry 1 }
|
|
|
|
-- hwTdmE1TotalIntervalNum OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..95)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This value indicates the total number of E1 port statistics in 15 minute
|
|
-- interval in 24 hour statistics."
|
|
-- ::= { hwTdmE1TotalStatEntry 2 }
|
|
|
|
-- hwTdmE1TotalESs OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The sum of Errored Seconds encountered by a E1 interface in the previous
|
|
-- 24 hour interval."
|
|
-- ::= { hwTdmE1TotalStatEntry 3 }
|
|
|
|
-- hwTdmE1TotalUASs OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of Unavailable Seconds encountered by a E1 interface in the
|
|
-- previous 24 hour interval."
|
|
-- ::= { hwTdmE1TotalStatEntry 4 }
|
|
|
|
-- hwTdmE1TotalSESs OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of Severely Errored Seconds encountered by a E1 interface in
|
|
-- the previous 24 hour interval. "
|
|
-- ::= { hwTdmE1TotalStatEntry 5 }
|
|
|
|
-- hwTdmE1TotalBESs OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of Bursty Errored Seconds (BESs) encountered by a E1 interface
|
|
-- in the previous 24 hour interval."
|
|
-- ::= { hwTdmE1TotalStatEntry 6 }
|
|
|
|
-- hwTdmE1TotalLOFC OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of loss of frame events encountered by a E1 interface in the
|
|
-- previous 24 hour interval."
|
|
-- ::= { hwTdmE1TotalStatEntry 7 }
|
|
|
|
-- hwTdmE1TotalCSSs OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of Controlled Slip Seconds encountered by a E1 interface in the
|
|
-- previous 24 hour interval."
|
|
-- ::= { hwTdmE1TotalStatEntry 8 }
|
|
|
|
--hwTdmE1TotalDMs OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of Degraded Minutes (DMs) encountered by a E1 interface in the
|
|
-- previous 24 hour interval."
|
|
-- ::= { hwTdmE1TotalStatEntry 9 }
|
|
|
|
-- hwTdmE1TotalDEGMinute OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The number of DEG Minutes encountered by a E1 interface in the
|
|
-- previous 24 hour interval."
|
|
-- ::= { hwTdmE1TotalStatEntry 10 }
|
|
|
|
|
|
--
|
|
-- ADTRAN Script Configuration Table
|
|
--
|
|
hwTdmAdtranScriptTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTdmAdtranScriptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configuration about a TDM Modem
|
|
to config TDM SHDSL terminal.The index of this table is ifIndex."
|
|
::= { hwTdmCommonConfiguration 1 }
|
|
|
|
hwTdmAdtranScriptEntry OBJECT-TYPE
|
|
SYNTAX HwTdmAdtranScriptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the configuration about a TDM Modem
|
|
to config TDM SHDSL terminal.The index of this entry is ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { hwTdmAdtranScriptTable 1 }
|
|
|
|
HwTdmAdtranScriptEntry ::=
|
|
SEQUENCE {
|
|
hwTdmAdtranScript
|
|
OCTET STRING,
|
|
hwTdmAdtranScriptLatestResult
|
|
INTEGER
|
|
}
|
|
|
|
-- hwTdmConfigurationScript
|
|
hwTdmAdtranScript OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to config TDM SHDSL terminal, and it may include sereval commands. Each command
|
|
ends with one or more '\n', and every '\n' means delay 1 second too.
|
|
For example: command '123\r\n\n\n45\n' expects two steps. The first step is send '123\r' to the terminal,
|
|
then delay 3 seconds, and the second step is send '45' to the terminal, then delay 1 second.
|
|
"
|
|
::= { hwTdmAdtranScriptEntry 1 }
|
|
|
|
hwTdmAdtranScriptLatestResult OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
idle(1),
|
|
fail(2),
|
|
busy(3),
|
|
success(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the lastest script configuration.
|
|
Options:
|
|
1. idle(1) - Indicates that no configuration.
|
|
2. fail(2) - Indicates that last configuration failed.
|
|
3. busy(3) - Indicates that Operating new config.
|
|
4. success(4) - Indicates that last configuration successed.
|
|
"
|
|
::= { hwTdmAdtranScriptEntry 2 }
|
|
|
|
--
|
|
-- Compliance statements
|
|
--
|
|
hwTdmMIBTftpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for TFTP download."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hwTdmMIBTftpGroup }
|
|
|
|
::= { hwTdmMIBCompliances 1 }
|
|
|
|
-- Units of compliance
|
|
hwTdmMIBTftpGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- ifIndex,
|
|
hwTdmTftpFileServerIP,
|
|
hwTdmTftpFileName,
|
|
hwTdmTftpFileTransCmd
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing for TFTP
|
|
uploading and downloading."
|
|
::= { hwTdmMIBGroups 1 }
|
|
|
|
|
|
|
|
|
|
|
|
END |