WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HUAWEI-NTP-MIB

3470 lines
118 KiB
Plaintext
Raw Blame History

-- ============================================================================
-- Copyright (C) 2022 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: This MIB module defines mib objects that provide NTP service
-- management.
-- The Network Time Protocol (NTP) is used in networks of all types
-- and sizes for time synchronization of servers, workstations and
-- other networked equipment.
-- Reference:
-- Version: V2.17
-- ============================================================================
HUAWEI-NTP-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY,NOTIFICATION-TYPE,
IpAddress, Unsigned32, Integer32, Counter64 FROM SNMPv2-SMI
RowStatus, TruthValue, DateAndTime,
DisplayString FROM SNMPv2-TC
huaweiUtility FROM HUAWEI-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
Ipv6Address FROM IPV6-TC
InterfaceIndex FROM IF-MIB
OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF;
hwNtp MODULE-IDENTITY
LAST-UPDATED "202203170000Z"
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"This MIB module defines mib objects that provide NTP service
management. The Network Time Protocol (NTP) is used in networks of all types
and sizes for time synchronization of servers, workstations and
other networked equipment."
-- Revision history
REVISION "202203170000Z"
DESCRIPTION "V2.17, modified description of hwNtpUniPeerMinpoll, hwNtpManycastClientIfName, hwNtpManycastServerIfName, hwNtpMulticastServerGenIfName, hwNtpMulticastClientGenIfName, hwNtpBroadcastClientGenIfName, hwNtpBroadcastServerGenIfName"
REVISION "202202240000Z"
DESCRIPTION "V2.16, modified revision history description spelling of the v2.14 and v2.15"
REVISION "202202230000Z"
DESCRIPTION "V2.15, modified description spelling of the nodes hwNtpAuthKeyidType"
REVISION "202111080000Z"
DESCRIPTION "V2.14, modified description of the nodes hwNtpAuthKeyidType"
REVISION "202103260000Z"
DESCRIPTION "V2.13, modified description of the nodes hwNtpServiceSourceInterfaceVpnTable and hwNtpServiceSourceInterfaceVpnEntry"
REVISION "202007160000Z"
DESCRIPTION "V2.12, modified description of the nodes hwNtpSessionClockSourceIp, hwNtpSessionVpnFlag, hwNtpUniServerAddressType, hwNtpUniPeerAddressType, hwNtpServiceSourceInterfaceVpnAddressType, hwNtpManycastClientIpType, hwNtpManycastServerIpType, hwNtpMulticastServerGenAddressType, hwNtpMulticastClientGenAddressType and hwNtpServerSourceAllInterfaceAddressType"
REVISION "202003300000Z"
DESCRIPTION "V2.11, modified description of the nodes hwNtpServerSourceAllInterfaceRowStatus, hwNtpServerSourceInterfaceRowStatus, hwNtpServerSourceIpv6Addr and hwNtpServerSourceIpv6RowStatus"
REVISION "202003230000Z"
DESCRIPTION "V2.10, added below tables
hwNtpServerSourceAllInterfaceTable
hwNtpServerSourceInterfaceTable
hwNtpServerSourceIpv6Table"
REVISION "201809200000Z"
DESCRIPTION "V2.09, modified description of the nodes hwNtpAuthKeyidType and hwNtpInInterfaceType"
REVISION "201708170000Z"
DESCRIPTION "V2.08, deleted index"
REVISION "201609260000Z"
DESCRIPTION "V2.07, modified hwNtpInInterfaceGenEntry, hwNtpBroadcastClientGenTable, hwNtpBroadcastClientGenEntry, hwNtpBroadcastServerGenTable, hwNtpBroadcastServerGenEntry description and modified alignment of hwNtpMulticastServerGenVersion, hwNtpIPv6ServerSwitch, hwNtpIPv4ServerSwitch"
REVISION "201409040000Z"
DESCRIPTION "V2.06, modified the revision history."
REVISION "201409010000Z"
DESCRIPTION "V2.05, modified the date of copyright."
REVISION "201407230000Z"
DESCRIPTION "V2.04, change in auth keyid table"
REVISION "201407030000Z"
DESCRIPTION "V2.03, added hwNtpIPv4ServerSwitch and hwNtpIPv6ServerSwitch for NTP Server Disable"
REVISION "201405280000Z"
DESCRIPTION "V2.02, added new tables and scalar objects for IAS product"
REVISION "201405060000Z"
DESCRIPTION "V2.01, added below nodes in HwNtpAuthenKeyEntry
hwNtpAuthKeyidType
hwNtpAuthKeyidPassword"
REVISION "201205220000Z"
DESCRIPTION "V1.08, added below tables
hwNtpAuthenAccessTable
hwNtpAuthenAccessAcl6
hwNtpInInterfaceTable
hwNtpInInterfaceAdminStatus6
hwNtpQueryNtpServerSessionTable
hwNtpSessionVpn
hwNtpUniServerTable
hwNtpUniServerMaxpoll
hwNtpUniServerMinpoll
hwNtpUniServerburst
hwNtpUniServerIburst
hwNtpUniServerPreempt
hwNtpUniPeerTable
hwNtpUniPeerMaxpoll
hwNtpUniPeerMinpoll
hwNtpUniPeerPreempt
hwNtpServiceSourceInterfaceVpnTable
hwNtpManycastClientTable
hwNtpManycastServerTable
hwNtpMulticastServerGenTable
hwNtpMulticastClientGenTable
Added below scalar nodes
hwNtpKODStatus
hwNtpDiscardMinInterval
hwNtpDiscardAvgInterval"
REVISION "201108100000Z"
DESCRIPTION "V1.07, NTP support VPN
1) Added two tables hwNtpUniServerTable hwNtpUniPeerTable.
2) Added two nodes hwNtpSessionVpnInstance hwNtpStatusReferenceClockVpn.
3) Modified the range of 5 nodes."
REVISION "201002080000Z"
DESCRIPTION "V1.01, release version"
REVISION "201001300000Z"
DESCRIPTION "V1.00, initial draft"
::= { huaweiUtility 4 }
-- 1.3.6.1.4.1.2011.6.4.1
ntp OBJECT IDENTIFIER ::= { hwNtp 1 }
-- 1.3.6.1.4.1.2011.6.4.1.4
ntpSynInterval OBJECT-TYPE
SYNTAX Integer32 (0 | 180..600)
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the synchronization interval. Unit: Second.
0 indicates not configured."
::= { ntp 4 }
-- 1.3.6.1.4.1.2011.6.4.1.8
hwNtpKODStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for enabling or disabling the NTP service KOD feature.
Options:
1. enable(1) -indicates the NTP service KOD feature is enabled
2. disable(2) -indicates the NTP service KOD feature is disabled
"
::= { ntp 8 }
-- 1.3.6.1.4.1.2011.6.4.2
hwNtpObject OBJECT IDENTIFIER ::= { hwNtp 2 }
-- 1.3.6.1.4.1.2011.6.4.2.2
hwNtpDynamicSession OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum number of dynamic NTP sessions allowed on the host.
Range: 0-100
Default: 100
"
::= { hwNtpObject 2 }
-- 1.3.6.1.4.1.2011.6.4.2.3
hwNtpRefclockMasterTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpRefclockMasterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting an NTP master clock. By using this table,
you can set an NTP master clock on the host, which functions as
the clock source for synchronizing the devices in a system.
After an NTP master clock is set successfully, all devices required
to follow the same clock in the system must synchronize to the master clock.
"
::= { hwNtpObject 3 }
-- 1.3.6.1.4.1.2011.6.4.2.3.1
hwNtpRefclockMasterEntry OBJECT-TYPE
SYNTAX HwNtpRefclockMasterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting an NTP master clock. By using this table,
you can set an NTP master clock on the host, which functions as
the clock source for synchronizing the devices in a system.
After an NTP master clock is set successfully, all devices required
to follow the same clock in the system must synchronize to the master clock.
The index of this entry is hwNtpRefclockMasterIpaddr.
"
INDEX { hwNtpRefclockMasterIpaddr }
::= { hwNtpRefclockMasterTable 1 }
HwNtpRefclockMasterEntry ::=
SEQUENCE {
hwNtpRefclockMasterIpaddr
IpAddress,
hwNtpRefclockMasterStratum
Integer32,
hwNtpRefclockMasterRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.3.1.1
hwNtpRefclockMasterIpaddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the clock source. The format of the
value is 127.127.1.u, where u ranges from 0 to 3. The default
value of this leaf is 127.127.1.0."
::= { hwNtpRefclockMasterEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.3.1.2
hwNtpRefclockMasterStratum OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the stratum where the local clock is specified to locate.
The stratum represents the precision of a clock. The clock at stratum
1 has the highest precision. The precision descends from stratum 1 to
stratum 15. The default value of this leaf is 8."
::= { hwNtpRefclockMasterEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.3.1.6
hwNtpRefclockMasterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete
and query operations. In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpRefclockMasterEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.4
hwNtpServiceSourceInterfaceObject OBJECT IDENTIFIER ::= { hwNtpObject 4 }
-- 1.3.6.1.4.1.2011.6.4.2.4.1
hwNtpServiceSourceInterfaceIfType OBJECT-TYPE
SYNTAX INTEGER
{
tunnel(1),
null(2),
meth(3),
vlanif(4),
loopback(5),
notConfigured(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface type.
Options:
1. tunnel(1) -indicates the tunnel interface
2. null(2) -indicates the NULL interface
3. meth(3) -indicates the MEth interface
4. vlanif(4) -indicates the VLAN interface
5. loopback(5) -indicates the loopback interface
6. notConfigured(6) -indicates that no source interface is configured
When this leaf is set to notConfigured(6), it indicates that no source
interface is configured.
"
::= { hwNtpServiceSourceInterfaceObject 1 }
-- 1.3.6.1.4.1.2011.6.4.2.4.2
hwNtpServiceSourceInterfaceIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface ID.
Range: 0-4093
Range for the tunnel interface: 1-64
Range for the NULL interface: 0
Range for the MEth interface: 0
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpServiceSourceInterfaceIfType) together identify an interface.
"
::= { hwNtpServiceSourceInterfaceObject 2 }
-- 1.3.6.1.4.1.2011.6.4.2.5
hwNtpAuth OBJECT IDENTIFIER ::= { hwNtpObject 5 }
-- 1.3.6.1.4.1.2011.6.4.2.5.1
hwNtpAuthenSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for enabling or disabling the NTP service authentication function.
Options:
1. enable(1) -indicates the NTP service authentication function is enabled
2. disable(2) -indicates the NTP service authentication function is disabled
After the NTP service authentication function is enabled, this function
is available; otherwise, this function is not available.
"
::= { hwNtpAuth 1 }
-- 1.3.6.1.4.1.2011.6.4.2.5.2
hwNtpAuthenAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpAuthenAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"To protect the NTP service of the local device, use this table to set the
authority for accessing the NTP service of the local device. After the
authority is set successfully, the local device determines whether to process
the received NTP synchronization packet and whether to allow the local device
to synchronize to the device sending the packet, according to the configured
authority and the packet content.
"
::= { hwNtpAuth 2 }
-- 1.3.6.1.4.1.2011.6.4.2.5.2.1
hwNtpAuthenAccessEntry OBJECT-TYPE
SYNTAX HwNtpAuthenAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"To protect the NTP service of the local device, use this table to set the
authority for accessing the NTP service of the local device. After the
authority is set successfully, the local device determines whether to process
the received NTP synchronization packet and whether to allow the local device
to synchronize to the device sending the packet, according to the configured
authority and the packet content.
The index of this entry is hwNtpAuthenAccessType.
"
INDEX { hwNtpAuthenAccessType }
::= { hwNtpAuthenAccessTable 1 }
HwNtpAuthenAccessEntry ::=
SEQUENCE {
hwNtpAuthenAccessType
INTEGER,
hwNtpAuthenAccessAcl
Integer32,
hwNtpAuthenAccessRowStatus
RowStatus,
hwNtpAuthenAccessAcl6
Integer32
}
-- 1.3.6.1.4.1.2011.6.4.2.5.2.1.1
hwNtpAuthenAccessType OBJECT-TYPE
SYNTAX INTEGER
{
peer(1),
query(2),
server(3),
synchronization(4),
limited(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the access authority type. This leaf is the index of the table.
Five options are supported.
Options:
1. peer(1) -The time request and control query to the local NTP service are allowed
and the local clock can be synchronized to the remote server.
2. query(2) -Only the control query to the local NTP service is allowed.
3. server(3) -The time request and control query to the local NTP service are allowed
but the local clock is not synchronized to the remote server.
4. synchronization(4) -Only the time request to the local NTP service is allowed.
5. limited(5) -Controls the incoming packet rate and kiss code sent when kod is enabled.
"
::= { hwNtpAuthenAccessEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.5.2.1.2
hwNtpAuthenAccessAcl OBJECT-TYPE
SYNTAX Integer32 (0 | 2000..2999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the IPv4 ACL number.
Range: 2000-2999
The default value is 0, indicating no configuration.
The IP address ACL is used by the local device to match the source IP address of
a received packet, and then the device can determine whether to process or discard the packet.
"
::= { hwNtpAuthenAccessEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.5.2.1.6
hwNtpAuthenAccessRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpAuthenAccessEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.5.2.1.7
hwNtpAuthenAccessAcl6 OBJECT-TYPE
SYNTAX Integer32 (0 | 2000..2999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the IPv6 ACL number.
Range: 2000-2999
The default value is 0, indicating no configuration.
The IPv6 address ACL is used by the local device to match the source IPv6 address of
a received packet and then the device can determine whether to process or discard the packet.
"
::= { hwNtpAuthenAccessEntry 7 }
-- 1.3.6.1.4.1.2011.6.4.2.5.3
hwNtpAuthenKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpAuthenKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP service authentication key.
During the creation of the NTP service authentication key,
you can also set and issue hwNtpAuthReliableSwitch,
declaring the created key as reliable.
"
::= { hwNtpAuth 3 }
-- 1.3.6.1.4.1.2011.6.4.2.5.3.1
hwNtpAuthenKeyEntry OBJECT-TYPE
SYNTAX HwNtpAuthenKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP service authentication key.
During the creation of the NTP service authentication key,
you can also set and issue hwNtpAuthReliableSwitch,
declaring the created key as reliable.
The index of this entry is hwNtpAuthKeyidNumber.
"
INDEX { hwNtpAuthKeyidNumber }
::= { hwNtpAuthenKeyTable 1 }
HwNtpAuthenKeyEntry ::=
SEQUENCE {
hwNtpAuthKeyidNumber
Unsigned32,
hwNtpAuthKeyidMD5
OCTET STRING,
hwNtpAuthReliableSwitch
INTEGER,
hwNtpAuthKeyidRowStatus
RowStatus,
hwNtpAuthKeyidType
INTEGER,
hwNtpAuthKeyidPassword
OCTET STRING
}
-- 1.3.6.1.4.1.2011.6.4.2.5.3.1.1
hwNtpAuthKeyidNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the key number.
Range: 1-4294967295
"
::= { hwNtpAuthenKeyEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.5.3.1.2
hwNtpAuthKeyidMD5 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..392))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MD5 key.
The MD5 key must not contain the space character and '?' character.
Reading this object always results in an OCTET STRING of length zero.
Authentication may not be bypassed by reading the MIB object.
"
::= { hwNtpAuthenKeyEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.5.3.1.3
hwNtpAuthReliableSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for specifying the authentication key as reliable and to undo the current setting.
Options:
1. enable(1) -indicating that the key is reliable.
2. disable(2) -indicating that the key is not reliable.
Default: disable(2).
"
::= { hwNtpAuthenKeyEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.5.3.1.6
hwNtpAuthKeyidRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpAuthenKeyEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.5.3.1.7
hwNtpAuthKeyidType OBJECT-TYPE
SYNTAX INTEGER
{
md5(1),
sha256(2),
aes128cmac(3),
aes256cmac(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates hashing algorithm MD5 or SHA-256 which is used for NTP authentication.
Options:
1. md5(1) -indicates the NTP MD5 algorithm is used as hashing algorithm
2. sha256(2) -indicates the NTP SHA-256 algorithm is used as hashing algorithm
3. aes128cmac(3) -indicates the NTP AES-128-CMAC algorithm is used as hashing algorithm
4. aes256cmac(4) -indicates the NTP AES-256-CMAC algorithm is used as hashing algorithm"
::= { hwNtpAuthenKeyEntry 7 }
-- 1.3.6.1.4.1.2011.6.4.2.5.3.1.8
hwNtpAuthKeyidPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..392))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates MD5 or SHA256 or AESCMAC password key.
The key must not contain the space character and '?' character.
Reading this object always results in an OCTET STRING of length zero.
Authentication may not be bypassed by reading the MIB object.
hwNtpAuthKeyidType and hwNtpAuthKeyidPassword should be configured together for set operation."
::= { hwNtpAuthenKeyEntry 8 }
-- 1.3.6.1.4.1.2011.6.4.2.6
hwNtpUnicastServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpUnicastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP unicast server mode. This table provides a leaf for
setting an IP address, which specifies a remote server to serve as the time server
of the local device.
"
::= { hwNtpObject 6 }
-- 1.3.6.1.4.1.2011.6.4.2.6.1
hwNtpUnicastServerEntry OBJECT-TYPE
SYNTAX HwNtpUnicastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP unicast server mode. This table provides a leaf for
setting an IP address, which specifies a remote server to serve as the time server
of the local device.
The index of this entry is hwNtpUnicastServerIp.
"
INDEX { hwNtpUnicastServerIp }
::= { hwNtpUnicastServerTable 1 }
HwNtpUnicastServerEntry ::=
SEQUENCE {
hwNtpUnicastServerIp
IpAddress,
hwNtpUnicastServerVersion
Integer32,
hwNtpUnicastServerAuthKeyid
Unsigned32,
hwNtpUnicastServerSourceIfType
INTEGER,
hwNtpUnicastServerSourceIfNumber
Integer32,
hwNtpUnicastServerPreference
INTEGER,
hwNtpUnicastServerRowStatus
RowStatus,
hwNtpUnicastServerSourceIfName
OCTET STRING
}
-- 1.3.6.1.4.1.2011.6.4.2.6.1.1
hwNtpUnicastServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the remote server. The IP address is the address of the
host and cannot be a broadcast IP address, multicast IP address, IP address of the
clock source or IP address of an interface on the local device."
::= { hwNtpUnicastServerEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.6.1.2
hwNtpUnicastServerVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the NTP protocol version.
Range: 1-4
Default: 3
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version.
"
::= { hwNtpUnicastServerEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.6.1.3
hwNtpUnicastServerAuthKeyid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the key ID used for sending packets to the remote server.
Range: 0-4294967295 for versions 1,2 and 3
Range: 0-65535 for version 4
0 indicates not configured.
The key ID identifies a key.
When the packets sent by the remote server need to be authenticated, you need
to set and issue this leaf.
"
::= { hwNtpUnicastServerEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.6.1.4
hwNtpUnicastServerSourceIfType OBJECT-TYPE
SYNTAX INTEGER
{
tunnel(1),
null(2),
meth(3),
vlanif(4),
loopback(5),
notConfigured(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface type.
Options:
1. tunnel(1) -indicates the tunnel interface
2. null(2) -indicates the NULL interface
3. meth(3) -indicates the MEth interface
4. vlanif(4) -indicates the VLAN interface
5. loopback(5) -indicates the loopback interface
6. notConfigured(6) -indicates that no source interface is configured
When this leaf is set to notConfigured(6), it indicates that no source interface is
configured in the case of the create operation and that the source interface
is deleted in the case of the modify operation.
"
::= { hwNtpUnicastServerEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.6.1.5
hwNtpUnicastServerSourceIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface ID.
Range: 0-4093
Range for the tunnel interface: 1-64
Range for the NULL interface: 0
Range for the MEth interface: 0
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpUnicastServerSourceIfType) together
identify the source interface for sending NTP unicast packets.
"
::= { hwNtpUnicastServerEntry 5 }
-- 1.3.6.1.4.1.2011.6.4.2.6.1.6
hwNtpUnicastServerPreference OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the server is the preferred server.
Options:
1. enable(1) -indicates that the server is preferred
2. disable(2) -indicates that the server is not preferred
When multiple servers exist at the same stratum, the specified server is preferred
for synchronization.
"
::= { hwNtpUnicastServerEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.6.1.9
hwNtpUnicastServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpUnicastServerEntry 9 }
-- 1.3.6.1.4.1.2011.6.4.2.6.1.10
hwNtpUnicastServerSourceIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the interface name used for sending out the packets if
hwNtpUnicastServerSourceIfType and hwNtpUnicastServerSourceIfNumber
are configured. If not configured, it will be wildcard.
"
::= { hwNtpUnicastServerEntry 10 }
-- 1.3.6.1.4.1.2011.6.4.2.7
hwNtpUnicastPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpUnicastPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP unicast peer mode. This table provides a leaf for
setting an IP address, which specifies a remote server to serve as the peer of
the local device.
"
::= { hwNtpObject 7 }
-- 1.3.6.1.4.1.2011.6.4.2.7.1
hwNtpUnicastPeerEntry OBJECT-TYPE
SYNTAX HwNtpUnicastPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP unicast peer mode. This table provides a leaf for
setting an IP address, which specifies a remote server to serve as the peer of
the local device.
The index of this entry is hwNtpUnicastPeerIP.
"
INDEX { hwNtpUnicastPeerIP }
::= { hwNtpUnicastPeerTable 1 }
HwNtpUnicastPeerEntry ::=
SEQUENCE {
hwNtpUnicastPeerIP
IpAddress,
hwNtpUnicastPeerVersion
Integer32,
hwNtpUnicastPeerAuthKeyid
Unsigned32,
hwNtpUnicastPeerSourceIfType
INTEGER,
hwNtpUnicastPeerSourceIfNumber
Integer32,
hwNtpUnicastPeerPreference
INTEGER,
hwNtpUnicastPeerRowStatus
RowStatus,
hwNtpUnicastPeerSourceIfName
OCTET STRING
}
-- 1.3.6.1.4.1.2011.6.4.2.7.1.1
hwNtpUnicastPeerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the remote peer. The IP address is the address
of the host and cannot be a broadcast IP address, multicast IP address, IP address
of the clock source or IP address of an interface on the local device."
::= { hwNtpUnicastPeerEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.7.1.2
hwNtpUnicastPeerVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the NTP protocol version.
Range: 1-4
Default: 3
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version.
"
::= { hwNtpUnicastPeerEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.7.1.3
hwNtpUnicastPeerAuthKeyid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the key ID for sending packets to the unicast peer.
Range: 0-4294967295 for versions 1,2 and 3
Range: 0-65535 for version 4
0 indicates not configured.
The key ID identifies a key.
When the packets sent by the peer need to be authenticated, you need to set and issue this leaf.
"
::= { hwNtpUnicastPeerEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.7.1.4
hwNtpUnicastPeerSourceIfType OBJECT-TYPE
SYNTAX INTEGER
{
tunnel(1),
null(2),
meth(3),
vlanif(4),
loopback(5),
notConfigured(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface type.
Options:
1. tunnel(1) -indicates the tunnel interface
2. null(2) -indicates the NULL interface
3. meth(3) -indicates the MEth interface
4. vlanif(4) -indicates the VLAN interface
5. loopback(5) -indicates the loopback interface
6. notConfigured(6) -indicates that no source interface is configured
When this leaf is set to notConfigured(6), it indicates that no source interface is configured in
the case of the create operation and that the source interface is deleted in the case of the
modify operation.
"
::= { hwNtpUnicastPeerEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.7.1.5
hwNtpUnicastPeerSourceIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface ID.
Range: 0-4093
Range for the tunnel interface: 1-64
Range for the NULL interface: 0
Range for the MEth interface: 0
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpUnicastPeerSourceIfType) together identify an interface.
"
::= { hwNtpUnicastPeerEntry 5 }
-- 1.3.6.1.4.1.2011.6.4.2.7.1.6
hwNtpUnicastPeerPreference OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the peer is the preferred peer.
Options:
1. enable(1) -indicates that the peer is preferred.
2. disable(2) -indicates that the peer is not preferred.
When multiple peers exist at the same stratum, the specified peer is preferred
for synchronization.
"
::= { hwNtpUnicastPeerEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.7.1.9
hwNtpUnicastPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpUnicastPeerEntry 9 }
-- 1.3.6.1.4.1.2011.6.4.2.7.1.10
hwNtpUnicastPeerSourceIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the interface name used for sending out the packets if
hwNtpUnicastPeerSourceIfType and hwNtpUnicastPeerSourceIfNumber
are configured. If not configured, it will be wildcard.
"
::= { hwNtpUnicastPeerEntry 10 }
-- 1.3.6.1.4.1.2011.6.4.2.8
hwNtpMulticastClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpMulticastClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the local device to function as a multicast client.
When functioning as a multicast client, the local device listens for the NTP multicast
packets sent by the server and synchronizes the local clock with the clock source.
"
::= { hwNtpObject 8 }
-- 1.3.6.1.4.1.2011.6.4.2.8.1
hwNtpMulticastClientEntry OBJECT-TYPE
SYNTAX HwNtpMulticastClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the local device to function as a multicast client.
When functioning as a multicast client, the local device listens for the NTP multicast
packets sent by the server and synchronizes the local clock with the clock source.
The indexes of this entry are hwNtpMulticastClientIfType, hwNtpMulticastClientIfNumber and hwNtpMulticastClientIp.
"
INDEX { hwNtpMulticastClientIfType, hwNtpMulticastClientIfNumber, hwNtpMulticastClientIp }
::= { hwNtpMulticastClientTable 1 }
HwNtpMulticastClientEntry ::=
SEQUENCE {
hwNtpMulticastClientIfType
INTEGER,
hwNtpMulticastClientIfNumber
Integer32,
hwNtpMulticastClientIp
IpAddress,
hwNtpMulticastClientRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.8.1.1
hwNtpMulticastClientIfType OBJECT-TYPE
SYNTAX INTEGER
{
loopback(1),
vlanif(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface type to configure NTP multicast client.
Options:
1. loopback(1) -indicates the loopback interface
2. vlanif(2) -indicates the VLAN interface
"
::= { hwNtpMulticastClientEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.8.1.2
hwNtpMulticastClientIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface ID to configure NTP multicast client.
Range: 0-4093
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpMulticastClientIfType) together identify
the interface for receiving NTP multicast packets.
"
::= { hwNtpMulticastClientEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.8.1.3
hwNtpMulticastClientIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the NTP multicast client. The IP address can only be a class-D address.
"
::= { hwNtpMulticastClientEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.8.1.6
hwNtpMulticastClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpMulticastClientEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.9
hwNtpMulticastServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpMulticastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP multicast server mode. When functioning in the multicast
server mode, the local device serves as the multicast server and periodically sends multicast
packets to multicast clients.
"
::= { hwNtpObject 9 }
-- 1.3.6.1.4.1.2011.6.4.2.9.1
hwNtpMulticastServerEntry OBJECT-TYPE
SYNTAX HwNtpMulticastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP multicast server mode. When functioning in the multicast
server mode, the local device serves as the multicast server and periodically sends multicast
packets to multicast clients.
The indexes of this entry are hwNtpMulticastServerIfType, hwNtpMulticastServerIfNumber and hwNtpMulticastServerIP.
"
INDEX { hwNtpMulticastServerIfType, hwNtpMulticastServerIfNumber, hwNtpMulticastServerIP }
::= { hwNtpMulticastServerTable 1 }
HwNtpMulticastServerEntry ::=
SEQUENCE {
hwNtpMulticastServerIfType
INTEGER,
hwNtpMulticastServerIfNumber
Integer32,
hwNtpMulticastServerIP
IpAddress,
hwNtpMulticastServerVersion
Integer32,
hwNtpMulticastServerAuthKeyid
Unsigned32,
hwNtpMulticastServerTTL
Integer32,
hwNtpMulticastServerRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.9.1.1
hwNtpMulticastServerIfType OBJECT-TYPE
SYNTAX INTEGER
{
loopback(1),
vlanif(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface type to configure NTP multicast server.
Options:
1. loopback(1) -indicates the loopback interface
2. vlanif(2) -indicates the VLAN interface
"
::= { hwNtpMulticastServerEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.9.1.2
hwNtpMulticastServerIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface ID to configure NTP multicast server.
Range: 0-4093
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpMulticastServerIfType) together identify
the interface for sending NTP multicast packets.
"
::= { hwNtpMulticastServerEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.9.1.3
hwNtpMulticastServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the multicast server for sending multicast packets.
The IP address can only be a class-D address. This IP address identifies a multicast server."
::= { hwNtpMulticastServerEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.9.1.4
hwNtpMulticastServerVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the NTP protocol version.
Range: 1-4
Default: 3
The protocol of a later version is compatible with that of an earlier version,
but an earlier version is not compatible with a later version.
"
::= { hwNtpMulticastServerEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.9.1.5
hwNtpMulticastServerAuthKeyid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the key ID for sending messages to a multicast client.
Range: 0-4294967295 for versions 1,2 and 3
Range: 0-65535 for version 4
0 indicates not configured.
The key ID identifies a key.
The server and the client use the same authentication key.
"
::= { hwNtpMulticastServerEntry 5 }
-- 1.3.6.1.4.1.2011.6.4.2.9.1.6
hwNtpMulticastServerTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the TTL value of the multicast packet sent. Each time a multicast packet is forwarded,
TTL value is increased starting from 1 till the configured or default value is reached.
When the TTL value reaches configured or default value, the device does not forward the multicast packet.
Range: 1-255
Default: 16
"
::= { hwNtpMulticastServerEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.9.1.9
hwNtpMulticastServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpMulticastServerEntry 9 }
-- 1.3.6.1.4.1.2011.6.4.2.10
hwNtpBroadcastClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpBroadcastClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP broadcast client mode. When set to the broadcast
client mode, the local device listens for NTP broadcast packets and synchronizes
the local clock according to the received broadcast packets.
"
::= { hwNtpObject 10 }
-- 1.3.6.1.4.1.2011.6.4.2.10.1
hwNtpBroadcastClientEntry OBJECT-TYPE
SYNTAX HwNtpBroadcastClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP broadcast client mode. When set to the broadcast
client mode, the local device listens for NTP broadcast packets and synchronizes
the local clock according to the received broadcast packets.
The indexes of this entry are hwNtpBroadcastClientIfType and hwNtpBroadcastClientIfNumber.
"
INDEX { hwNtpBroadcastClientIfType, hwNtpBroadcastClientIfNumber }
::= { hwNtpBroadcastClientTable 1 }
HwNtpBroadcastClientEntry ::=
SEQUENCE {
hwNtpBroadcastClientIfType
INTEGER,
hwNtpBroadcastClientIfNumber
Integer32,
hwNtpBroadcastClientRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.10.1.1
hwNtpBroadcastClientIfType OBJECT-TYPE
SYNTAX INTEGER
{
loopback(1),
vlanif(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface type to configure NTP broadcast client.
Options:
1. loopback(1) -indicates the loopback interface
2. vlanif(2) -indicates the VLAN interface
"
::= { hwNtpBroadcastClientEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.10.1.2
hwNtpBroadcastClientIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface ID to configure NTP broadcast client.
Range: 0-4093
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpBroadcastClientIfType) together
identify the interface for receiving broadcast packets.
"
::= { hwNtpBroadcastClientEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.10.1.6
hwNtpBroadcastClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpBroadcastClientEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.11
hwNtpBroadcastServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpBroadcastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP broadcast server mode. When serving as an NTP broadcast
server, the local router periodically sends clock synchronization packets to broadcast
address 255.255.255.255 from a specified interface.
"
::= { hwNtpObject 11 }
-- 1.3.6.1.4.1.2011.6.4.2.11.1
hwNtpBroadcastServerEntry OBJECT-TYPE
SYNTAX HwNtpBroadcastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP broadcast server mode. When serving as an NTP broadcast
server, the local router periodically sends clock synchronization packets to broadcast
address 255.255.255.255 from a specified interface.
The indexes of this entry are hwNtpBroadcastServerIfType and hwNtpBroadcastServerIfNumber.
"
INDEX { hwNtpBroadcastServerIfType, hwNtpBroadcastServerIfNumber }
::= { hwNtpBroadcastServerTable 1 }
HwNtpBroadcastServerEntry ::=
SEQUENCE {
hwNtpBroadcastServerIfType
INTEGER,
hwNtpBroadcastServerIfNumber
Integer32,
hwNtpBroadcastServerVersion
Integer32,
hwNtpBroadcastServerAuthKeyid
Unsigned32,
hwNtpBroadcastServerRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.11.1.1
hwNtpBroadcastServerIfType OBJECT-TYPE
SYNTAX INTEGER
{
loopback(1),
vlanif(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface type to configure NTP broadcast server.
Options:
1. loopback(1) -indicates the loopback interface
2. vlanif(2) -indicates the VLAN interface
"
::= { hwNtpBroadcastServerEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.11.1.2
hwNtpBroadcastServerIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface ID to configure NTP broadcast server.
Range: 0-4093
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpBroadcastServerIfType) together identify
the interface for sending broadcast packets.
"
::= { hwNtpBroadcastServerEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.11.1.3
hwNtpBroadcastServerVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the NTP protocol version.
Range: 1-4
Default: 3
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version.
"
::= { hwNtpBroadcastServerEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.11.1.4
hwNtpBroadcastServerAuthKeyid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the key ID for sending packets to a broadcast client.
Range: 0-4294967295 for versions 1,2 and 3
Range: 0-65535 for version 4
0 means not configured.
The key ID identifies a key.
The server and the client use the same authentication key.
"
::= { hwNtpBroadcastServerEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.11.1.8
hwNtpBroadcastServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpBroadcastServerEntry 8 }
-- 1.3.6.1.4.1.2011.6.4.2.12
hwNtpInInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpInInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for enabling or disabling the NTP packet reception capability of a VLAN
interface or loopback interface.
"
::= { hwNtpObject 12 }
-- 1.3.6.1.4.1.2011.6.4.2.12.1
hwNtpInInterfaceEntry OBJECT-TYPE
SYNTAX HwNtpInInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for enabling or disabling the NTP packet reception capability of a VLAN
interface or loopback interface.
The indexes of this entry are hwNtpInInterfaceType and hwNtpInInterfaceIfNumber.
"
INDEX { hwNtpInInterfaceType, hwNtpInInterfaceIfNumber }
::= { hwNtpInInterfaceTable 1 }
HwNtpInInterfaceEntry ::=
SEQUENCE {
hwNtpInInterfaceType
INTEGER,
hwNtpInInterfaceIfNumber
Integer32,
hwNtpInInterfaceAdminStatus
INTEGER,
hwNtpInInterfaceAdminIPv6Status
INTEGER
}
-- 1.3.6.1.4.1.2011.6.4.2.12.1.1
hwNtpInInterfaceType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(0),
loopback(1),
vlanif(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface type of the ingress interface.
Options:
1. invalid(0) -indicates the Invalid interface
2. loopback(1) -indicates the loopback interface
3. vlanif(2) -indicates the VLAN interface
"
::= { hwNtpInInterfaceEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.12.1.2
hwNtpInInterfaceIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface number of the ingress interface.
Range: 0-4093
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpInInterfaceType) together identify the
interface for enabling or disabling NTP packets reception.
"
::= { hwNtpInInterfaceEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.12.1.6
hwNtpInInterfaceAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables an ingress interface.
Options:
1. enabled(1) -indicates that the NTP IPv4 packet reception capability is enabled
2. disabled(2) -indicates that the NTP IPv4 packet reception capability is disabled
Default: enabled(1)
In the walk operation, only the disabled interfaces are displayed.
"
::= { hwNtpInInterfaceEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.12.1.7
hwNtpInInterfaceAdminIPv6Status OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables an ingress interface.
Options:
1. enabled(1) -indicates that the NTP IPv6 packet reception capability is enabled
2. disabled(2) -indicates that the NTP IPv6 packet reception capability is disabled
Default: enabled(1)
In the walk operation, only the disabled interfaces are displayed.
"
::= { hwNtpInInterfaceEntry 7 }
-- 1.3.6.1.4.1.2011.6.4.2.13
hwNtpQueryNtpServerSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpQueryNtpServerSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for querying the information about all the sessions maintained by the
NTP service of the local device.
"
::= { hwNtpObject 13 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1
hwNtpQueryNtpServerSessionEntry OBJECT-TYPE
SYNTAX HwNtpQueryNtpServerSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for querying the information about all the sessions maintained by the
NTP service of the local device.
The index of this entry is hwNtpSessionAssociationID.
"
INDEX { hwNtpSessionAssociationID }
::= { hwNtpQueryNtpServerSessionTable 1 }
HwNtpQueryNtpServerSessionEntry ::=
SEQUENCE {
hwNtpSessionAssociationID
Unsigned32,
hwNtpSessionClockSourceIp
InetAddress,
hwNtpSessionClockStratum
Integer32,
hwNtpSessionReferClockID
IpAddress,
hwNtpSessionSourceMaster
TruthValue,
hwNtpSessionSourcePeer
TruthValue,
hwNtpSessionSelected
TruthValue,
hwNtpSessionCandidate
TruthValue,
hwNtpSessionConfigured
TruthValue,
hwNtpSessionPoll
Integer32,
hwNtpSessionTimeSpending
OCTET STRING,
hwNtpSessionOffset
OCTET STRING,
hwNtpSessionDelay
OCTET STRING,
hwNtpSessionDisper
OCTET STRING,
hwNtpSessionReach
Integer32,
hwNtpSessionVpnFlag
TruthValue,
hwNtpSessionVpn
OCTET STRING
}
-- 1.3.6.1.4.1.2011.6.4.2.13.1.1
hwNtpSessionAssociationID OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the NTP session ID.
Range: 1-65535
The NTP session ID is automatically allocated inside the system and is not user-configurable.
"
::= { hwNtpQueryNtpServerSessionEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.2
hwNtpSessionClockSourceIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the IP address of the remote host, that is, IPv4 or IPv6. the host connected to the local device."
::= { hwNtpQueryNtpServerSessionEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.3
hwNtpSessionClockStratum OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the clock stratum of the remote host.
Range: 0-16
The value 16 indicates that no clock stratum is configured.
"
::= { hwNtpQueryNtpServerSessionEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.4
hwNtpSessionReferClockID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the IP address of the remote server or the identifier of the reference clock that the local system clock has been synchronized with.
"
::= { hwNtpQueryNtpServerSessionEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.5
hwNtpSessionSourceMaster OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flag of the current system clock source.
Options:
1. true(1) -indicates that the clock is the current system clock source
2. false(2) -indicates that the clock is not the current system clock source
"
::= { hwNtpQueryNtpServerSessionEntry 5 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.6
hwNtpSessionSourcePeer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flag of the candidate clock source.
Options:
1. true(1) -indicates that the clock is the candidate clock source
2. false(2) -indicates that the clock is not the candidate clock source
"
::= { hwNtpQueryNtpServerSessionEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.7
hwNtpSessionSelected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flag of the clock source participating in the clock selection.
Options:
1. true(1) -indicates that the clock source participates in the clock selection
2. false(2) -indicates that the clock source does not participate in the clock selection
"
::= { hwNtpQueryNtpServerSessionEntry 7 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.8
hwNtpSessionCandidate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flag of the clock as a member of the candidate synchronous clock source list.
Options:
1. true(1) -indicates that the clock is a member of the candidate synchronous clock source list
2. false(2) -indicates that the clock is not a member of the candidate synchronous clock source list
"
::= { hwNtpQueryNtpServerSessionEntry 8 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.9
hwNtpSessionConfigured OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the configured flag. Indicates whether the session is configured by the user on the local host.
Options:
1. true(1) -indicates that the session is configured by the user on the local host
2. false(2) -indicates that the session is not configured by the user on the local host
"
::= { hwNtpQueryNtpServerSessionEntry 9 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.10
hwNtpSessionPoll OBJECT-TYPE
SYNTAX Integer32
UNITS "second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the poll interval for sending packets.
Default: 64
Unit: Second
"
::= { hwNtpQueryNtpServerSessionEntry 10 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.11
hwNtpSessionTimeSpending OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since the NTP packet is received from the peer last time.
Unit: Second.
"
::= { hwNtpQueryNtpServerSessionEntry 11 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.12
hwNtpSessionOffset OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the offset. It is the offset between the local clock and its peer clock."
::= { hwNtpQueryNtpServerSessionEntry 12 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.13
hwNtpSessionDelay OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the round-trip delay for transmitting the NTP packet between the server and client."
::= { hwNtpQueryNtpServerSessionEntry 13 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.14
hwNtpSessionDisper OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the dispersion. It means the maximum tolerance between the local clock and its peer clock."
::= { hwNtpQueryNtpServerSessionEntry 14 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.15
hwNtpSessionReach OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the reachability. It means whether the NTP packet sent by the remote host can reach the local device.
The value 0 indicates unreachable, and the non-zero value indicates reachable.
"
::= { hwNtpQueryNtpServerSessionEntry 15 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.16
hwNtpSessionVpnFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flag of the VPN instance.
Options:
1. true(1) -indicates that the clock is in a VPN instance
2. false(2) -indicates that the clock is not in a VPN instance, that is, IPv4 or IPv6. in the public VPN
"
::= { hwNtpQueryNtpServerSessionEntry 16 }
-- 1.3.6.1.4.1.2011.6.4.2.13.1.17
hwNtpSessionVpn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the VPN name to which the clock source belongs, in case of public VPN, value will be NULL.
"
::= { hwNtpQueryNtpServerSessionEntry 17 }
-- 1.3.6.1.4.1.2011.6.4.2.14
hwNtpQueryNtpServerStatus OBJECT IDENTIFIER ::= { hwNtpObject 14 }
-- 1.3.6.1.4.1.2011.6.4.2.14.1
hwNtpStatusClockStatus OBJECT-TYPE
SYNTAX INTEGER
{
unsynchronized(1),
synchronized(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the clock Status of the local device.
Options:
1. unsynchronized(1) -indicates the local clock is not synchronized to the remote server
2. synchronized(2) -indicates the local clock is synchronized to the remote server
"
::= { hwNtpQueryNtpServerStatus 1 }
-- 1.3.6.1.4.1.2011.6.4.2.14.2
hwNtpStatusClockStratum OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the clock stratum of the local device.
Range: 1-16
The value 16 indicates that no clock stratum is configured.
"
::= { hwNtpQueryNtpServerStatus 2 }
-- 1.3.6.1.4.1.2011.6.4.2.14.3
hwNtpStatusReferenceClockID OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the reference clock ID of the clock source. The value 0.0.0.0 indicates that clock is not synchronized.
"
::= { hwNtpQueryNtpServerStatus 3 }
-- 1.3.6.1.4.1.2011.6.4.2.14.4
hwNtpStatusNominalFrequency OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the nominal frequency of the local device. It is the pulse frequency
of the clock source and affects the precision of the clock source.
Unit: Hz
"
::= { hwNtpQueryNtpServerStatus 4 }
-- 1.3.6.1.4.1.2011.6.4.2.14.5
hwNtpStatusActualFrequency OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the actual frequency of the local device. It is the pulse frequency
of the clock source in actual running.
Unit: Hz
"
::= { hwNtpQueryNtpServerStatus 5 }
-- 1.3.6.1.4.1.2011.6.4.2.14.6
hwNtpStatusClockPrecision OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the precision of the local clock of the local device. The precision of the local
clock is indicated by the offset range of the local clock source. 2^N indicates 2 to the power of -N.
For example, 2^7 = 0.0078125.
"
::= { hwNtpQueryNtpServerStatus 6 }
-- 1.3.6.1.4.1.2011.6.4.2.14.7
hwNtpStatusClockOffset OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the clock offset. Indicates the adjustment value of the local clock when it synchronizes
to the clock source. The clock offset is the difference between the two clocks before the local
clock synchronizes to the clock source.
Unit: Millisecond
"
::= { hwNtpQueryNtpServerStatus 7 }
-- 1.3.6.1.4.1.2011.6.4.2.14.8
hwNtpStatusRootDelay OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the root delay. It indicates the delay between a server and its upper-layer server.
Unit: Millisecond
"
::= { hwNtpQueryNtpServerStatus 8 }
-- 1.3.6.1.4.1.2011.6.4.2.14.9
hwNtpStatusRootDispersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the root dispersion. It indicates the dispersion between a server and its upper-layer server.
Unit: Millisecond
"
::= { hwNtpQueryNtpServerStatus 9 }
-- 1.3.6.1.4.1.2011.6.4.2.14.10
hwNtpStatusPeerDispersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peer dispersion. It indicates the maximum tolerance between the local clock and its peer clock.
Unit: Millisecond
"
::= { hwNtpQueryNtpServerStatus 10 }
-- 1.3.6.1.4.1.2011.6.4.2.14.11
hwNtpStatusReferenceTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the reference time. It is the adjusted local time.
The data type is DateAndTime and the time format is UTC.
"
::= { hwNtpQueryNtpServerStatus 11 }
-- 1.3.6.1.4.1.2011.6.4.2.14.12
hwNtpStatusReferenceClockVpn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the VPN in which the reference clock is.
"
::= { hwNtpQueryNtpServerStatus 12 }
-- 1.3.6.1.4.1.2011.6.4.2.15
hwNtpUniServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpUniServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP unicast server mode. This table provides a leaf for
setting an IP address, which specifies a remote server to serve as the time server
of the local device.
"
::= { hwNtpObject 15 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1
hwNtpUniServerEntry OBJECT-TYPE
SYNTAX HwNtpUniServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP unicast server mode. This table provides a leaf for
setting an IP address, which specifies a remote server to serve as the time server
of the local device.
The indexes of this entry are hwNtpUniServerVpnName, hwNtpUniServerAddressType and hwNtpUniServerAddress.
"
INDEX { hwNtpUniServerVpnName, hwNtpUniServerAddressType, hwNtpUniServerAddress }
::= { hwNtpUniServerTable 1 }
HwNtpUniServerEntry ::=
SEQUENCE {
hwNtpUniServerVpnName
OCTET STRING,
hwNtpUniServerAddressType
InetAddressType,
hwNtpUniServerAddress
InetAddress,
hwNtpUniServerVersion
Integer32,
hwNtpUniServerAuthKeyid
Unsigned32,
hwNtpUniServerSourceIfType
INTEGER,
hwNtpUniServerSourceIfNumber
Integer32,
hwNtpUniServerPreference
INTEGER,
hwNtpUniServerRowStatus
RowStatus,
hwNtpUniServerMaxpoll
Integer32,
hwNtpUniServerMinpoll
Integer32,
hwNtpUniServerBurst
INTEGER,
hwNtpUniServerIburst
INTEGER,
hwNtpUniServerPreempt
INTEGER,
hwNtpUniServerSourceIfName
OCTET STRING
}
-- 1.3.6.1.4.1.2011.6.4.2.15.1.1
hwNtpUniServerVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the VPN instance of the remote server."
::= { hwNtpUniServerEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.2
hwNtpUniServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the type of the remote server's IP address, that is, IPv4 or IPv6.
For IPv4 value is 1 and for IPv6 value is 2."
::= { hwNtpUniServerEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.3
hwNtpUniServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the remote server. The IP address is the address of the
host and cannot be a broadcast IP address, multicast IP address, IP address of the
clock source or IP address of an interface on the local device. (Supports both IPv4 and IPv6).
"
::= { hwNtpUniServerEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.4
hwNtpUniServerVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the NTP protocol version.
Range: 1-4 for IPv4 server
4 for IPv6 server (IPv6 supports only version 4)
Default: 3 for IPv4 server
4 for IPv6 server
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version.
"
::= { hwNtpUniServerEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.5
hwNtpUniServerAuthKeyid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the key ID used for sending packets to the remote server.
Range: 0-4294967295 for versions 1,2 and 3
Range: 0-65535 for version 4
0 indicates not configured.
The key ID identifies a key.
When the packets sent by the remote server need to be authenticated, you need
to set and issue this leaf.
"
::= { hwNtpUniServerEntry 5 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.6
hwNtpUniServerSourceIfType OBJECT-TYPE
SYNTAX INTEGER
{
tunnel(1),
null(2),
meth(3),
vlanif(4),
loopback(5),
notConfigured(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface type.
Options:
1. tunnel(1) -indicates the tunnel interface
2. null(2) -indicates the NULL interface
3. meth(3) -indicates the MEth interface
4. vlanif(4) -indicates the VLAN interface
5. loopback(5) -indicates the loopback interface
6. notConfigured(6) -indicates that no source interface is configured
When this leaf is set to notConfigured(6), it indicates that no source interface is
configured in the case of the create operation, and that the source interface
is deleted in the case of the modify operation.
"
::= { hwNtpUniServerEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.7
hwNtpUniServerSourceIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface ID.
Range: 0-4093
Range for the tunnel interface: 1-64
Range for the NULL interface: 0
Range for the MEth interface: 0
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpUniServerSourceIfType) together
identify the source interface for sending NTP unicast packets.
"
::= { hwNtpUniServerEntry 7 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.8
hwNtpUniServerPreference OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the server is the preferred server.
Options:
1. enable(1) -indicates that the server is preferred.
2. disable(2) -indicates that the server is not preferred.
Default: disable(2)
When multiple servers exist at the same stratum, the specified server is preferred
for synchronization.
"
::= { hwNtpUniServerEntry 8 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.9
hwNtpUniServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpUniServerEntry 9 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.10
hwNtpUniServerMaxpoll OBJECT-TYPE
SYNTAX Integer32 (10..17)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates NTP maximum poll interval.
Range: 10-17
Default: 10"
::= { hwNtpUniServerEntry 10 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.11
hwNtpUniServerMinpoll OBJECT-TYPE
SYNTAX Integer32 (3..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates NTP minimum poll interval.
Range: 3-13
Default: 6"
::= { hwNtpUniServerEntry 11 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.12
hwNtpUniServerBurst OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates packets sent will be in burst mode
Options:
1. enable(1) -indicates packets are sent in burst mode
2. disable(2) -indicates packets are sent in normal mode"
::= { hwNtpUniServerEntry 12 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.13
hwNtpUniServerIburst OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates packets sent will be in iburst mode
Options:
1. enable(1) -indicates packets are sent in iburst mode
2. disable(2) -indicates packets are sent in normal mode"
::= { hwNtpUniServerEntry 13 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.14
hwNtpUniServerPreempt OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the server can be preempted.
Options:
1. enable(1) -indicates that the server can be preempted
2. disable(2) -indicates that the server cannot be preempted
Default: disable(2)"
::= { hwNtpUniServerEntry 14 }
-- 1.3.6.1.4.1.2011.6.4.2.15.1.15
hwNtpUniServerSourceIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface name used for sending out the packets.
If not configured, it will be wildcard.
"
::= { hwNtpUniServerEntry 15 }
-- 1.3.6.1.4.1.2011.6.4.2.16
hwNtpUniPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpUniPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP unicast peer mode. This table provides a leaf for
setting an IP address, which specifies a remote server to serve as the peer of
the local device.
"
::= { hwNtpObject 16 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1
hwNtpUniPeerEntry OBJECT-TYPE
SYNTAX HwNtpUniPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP unicast peer mode. This table provides a leaf for
setting an IP address, which specifies a remote server to serve as the peer of
the local device.
The indexes of this entry are hwNtpUniPeerVpnName, hwNtpUniPeerAddressType and hwNtpUniPeerAddress.
"
INDEX { hwNtpUniPeerVpnName, hwNtpUniPeerAddressType, hwNtpUniPeerAddress }
::= { hwNtpUniPeerTable 1 }
HwNtpUniPeerEntry ::=
SEQUENCE {
hwNtpUniPeerVpnName
OCTET STRING,
hwNtpUniPeerAddressType
InetAddressType,
hwNtpUniPeerAddress
InetAddress,
hwNtpUniPeerVersion
Integer32,
hwNtpUniPeerAuthKeyid
Unsigned32,
hwNtpUniPeerSourceIfType
INTEGER,
hwNtpUniPeerSourceIfNumber
Integer32,
hwNtpUniPeerPreference
INTEGER,
hwNtpUniPeerRowStatus
RowStatus,
hwNtpUniPeerMaxpoll
Integer32,
hwNtpUniPeerMinpoll
Integer32,
hwNtpUniPeerPreempt
INTEGER,
hwNtpUniPeerSourceIfName
OCTET STRING
}
-- 1.3.6.1.4.1.2011.6.4.2.16.1.1
hwNtpUniPeerVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the VPN instance of the remote peer."
::= { hwNtpUniPeerEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.2
hwNtpUniPeerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the type of the remote peer's IP address, that is, IPv4 or IPv6.
For IPv4 value is 1 and for IPv6 value is 2."
::= { hwNtpUniPeerEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.3
hwNtpUniPeerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the remote peer. The IP address is the address
of the host and cannot be a broadcast IP address, multicast IP address, IP address
of the clock source or IP address of an interface on the local device. (Supports both IPv4 and IPv6).
"
::= { hwNtpUniPeerEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.4
hwNtpUniPeerVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the NTP protocol version.
Range: 1-4 for IPv4 peer
4 for IPv6 peer (IPv6 supports only version 4)
Default: 3 for IPv4 peer
4 for IPv6 peer
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version.
"
::= { hwNtpUniPeerEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.5
hwNtpUniPeerAuthKeyid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the key ID for sending packets to the unicast peer.
Range: 0-4294967295 for versions 1,2 and 3
Range: 0-65535 for version 4
0 indicates not configured.
The key ID identifies a key.
When the packets sent by the peer need to be authenticated, you need to set and issue this leaf.
"
::= { hwNtpUniPeerEntry 5 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.6
hwNtpUniPeerSourceIfType OBJECT-TYPE
SYNTAX INTEGER
{
tunnel(1),
null(2),
meth(3),
vlanif(4),
loopback(5),
notConfigured(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface type.
Options:
1. tunnel(1) -indicates the tunnel interface
2. null(2) -indicates the NULL interface
3. meth(3) -indicates the MEth interface
4. vlanif(4) -indicates the VLAN interface
5. loopback(5) -indicates the loopback interface
6. notConfigured(6) -indicates that no source interface is configured
When this leaf is set to notConfigured(6), it indicates that no source interface is
configured in the case of the create operation and that the source interface
is deleted in the case of the modify operation.
"
::= { hwNtpUniPeerEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.7
hwNtpUniPeerSourceIfNumber OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interface ID.
Range: 0-4093
Range for the tunnel interface: 1-64
Range for the NULL interface: 0
Range for the MEth interface: 0
Range for the VLAN interface: 1-4093
Range for the loopback interface: 0-31
The interface ID and interface type (hwNtpUniPeerSourceIfType) together identify an interface.
"
::= { hwNtpUniPeerEntry 7 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.8
hwNtpUniPeerPreference OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the peer is the preferred peer.
Options:
1. enable(1) -indicates that the peer is preferred
2. disable(2) -indicates that the peer is not preferred
Default: disable(2)
When multiple peers exist at the same stratum, the specified peer is preferred
for synchronization.
"
::= { hwNtpUniPeerEntry 8 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.9
hwNtpUniPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpUniPeerEntry 9 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.10
hwNtpUniPeerMaxpoll OBJECT-TYPE
SYNTAX Integer32 (10..17)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates NTP maximum poll interval.
Range: 10-17
Default: 10"
::= { hwNtpUniPeerEntry 10 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.11
hwNtpUniPeerMinpoll OBJECT-TYPE
SYNTAX Integer32 (3..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates NTP minimum poll interval.
Default: 6"
::= { hwNtpUniPeerEntry 11 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.12
hwNtpUniPeerPreempt OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the peer can be preempted.
Options:
1. enable(1) -indicates that the peer can be preempted
2. disable(2) -indicates that the peer cannot be preempted
Default: disable(2)"
::= { hwNtpUniPeerEntry 12 }
-- 1.3.6.1.4.1.2011.6.4.2.16.1.13
hwNtpUniPeerSourceIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface name used for sending out the packets.
If not configured, it will be wildcard.
"
::= { hwNtpUniPeerEntry 13 }
-- 1.3.6.1.4.1.2011.6.4.2.17
hwNtpDiscard OBJECT IDENTIFIER ::= { hwNtpObject 17 }
-- 1.3.6.1.4.1.2011.6.4.2.17.1
hwNtpDiscardMinInterval OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the minimum inter-packet spacing interval Range: 1-8 Default: 1"
::= { hwNtpDiscard 1 }
-- 1.3.6.1.4.1.2011.6.4.2.17.2
hwNtpDiscardAvgInterval OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the average inter-packet spacing interval Range: 1-8 Default: 5"
::= { hwNtpDiscard 2 }
-- 1.3.6.1.4.1.2011.6.4.2.18
hwNtpServiceSourceInterfaceVpnTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpServiceSourceInterfaceVpnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwNtpServiceSourceInterfaceVpn table is used to specify the IPv4/IPv6 interface
to send NTP messages with specified VPN. In case of no configuration for VPN, default VPN 0 will be considered.
In the unicast mode, if you want only one interface to receive the NTP response packets,
specify NTP packets sent from all local interfaces to use the same source IP address.
In the broadcast and multicast modes, this command is invalid.
It is because the NTP service is enabled on the specified interface that actually is the source interface.
"
::= { hwNtpObject 18 }
-- 1.3.6.1.4.1.2011.6.4.2.18.1
hwNtpServiceSourceInterfaceVpnEntry OBJECT-TYPE
SYNTAX HwNtpServiceSourceInterfaceVpnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwNtpServiceSourceInterfaceVpn table is used to specify the IPv4/IPv6 interface
to send NTP messages with specified VPN. In case of no configuration for VPN, default VPN 0 will be considered.
In the unicast mode, if you want only one interface to receive the NTP response packets,
specify NTP packets sent from all local interfaces to use the same source IP address.
In the broadcast and multicast modes, this command is invalid.
It is because the NTP service is enabled on the specified interface that actually is the source interface.
The indexes of this entry are hwNtpServiceSourceInterfaceVpnName and hwNtpServiceSourceInterfaceVpnAddressType.
"
INDEX { hwNtpServiceSourceInterfaceVpnName, hwNtpServiceSourceInterfaceVpnAddressType }
::= { hwNtpServiceSourceInterfaceVpnTable 1 }
HwNtpServiceSourceInterfaceVpnEntry ::=
SEQUENCE {
hwNtpServiceSourceInterfaceVpnName
OCTET STRING,
hwNtpServiceSourceInterfaceVpnAddressType
InetAddressType,
hwNtpServiceSourceInterfaceVpnIfName
OCTET STRING,
hwNtpServiceSourceInterfaceVpnRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.18.1.1
hwNtpServiceSourceInterfaceVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the VPN instance of the source interface."
::= { hwNtpServiceSourceInterfaceVpnEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.18.1.2
hwNtpServiceSourceInterfaceVpnAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the type of the source interface's IP address, that is, IPv4 or IPv6.
For IPv4 value is 1 and for IPv6 value is 2.
"
::= { hwNtpServiceSourceInterfaceVpnEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.18.1.3
hwNtpServiceSourceInterfaceVpnIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface name used for sending out the packets.
If not configured, it will be wildcard.
"
::= { hwNtpServiceSourceInterfaceVpnEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.18.1.4
hwNtpServiceSourceInterfaceVpnRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete
and query operations. In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpServiceSourceInterfaceVpnEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.19
hwNtpManycastClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpManycastClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"hwNtpManycastClient table specifies NTP manycast client configurations.
An interface on the local device to send NTP manycast messages when timeout occurs.
The local device runs in manycast client mode and periodically sends manycast messages to the manycast server.
Based on the message received from manycast server, the dynamic client-server association is established.
While configuring manycast client, multicast IPv4 or IPv6 address must be used.
"
::= { hwNtpObject 19 }
-- 1.3.6.1.4.1.2011.6.4.2.19.1
hwNtpManycastClientEntry OBJECT-TYPE
SYNTAX HwNtpManycastClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"hwNtpManycastClient table specifies NTP manycast client configurations.
An interface on the local device to send NTP manycast messages when timeout occurs.
The local device runs in manycast client mode and periodically sends manycast messages to the manycast server.
Based on the message received from manycast server, the dynamic client-server association is established.
While configuring manycast client, multicast IPv4 or IPv6 address must be used.
The indexes of this entry are hwNtpManycastClientIfName, hwNtpManycastClientIpType and hwNtpManycastClientIp."
INDEX { hwNtpManycastClientIfName, hwNtpManycastClientIpType, hwNtpManycastClientIp }
::= { hwNtpManycastClientTable 1 }
HwNtpManycastClientEntry ::=
SEQUENCE {
hwNtpManycastClientIfName
OCTET STRING,
hwNtpManycastClientIpType
InetAddressType,
hwNtpManycastClientIp
InetAddress,
hwNtpManycastClientAuthKeyId
Unsigned32,
hwNtpManycastClientTTL
Integer32,
hwNtpManycastClientRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.19.1.1
hwNtpManycastClientIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the interface name to configure generic manycast client.
"
::= { hwNtpManycastClientEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.19.1.2
hwNtpManycastClientIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the type of the manycast IP address, that is, IPv4 or IPv6.
For IPv4 value is 1 and for IPv6 value is 2.
"
::= { hwNtpManycastClientEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.19.1.3
hwNtpManycastClientIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the manycast client for sending manycast packets.
The IP address can only be a class-D address. This IP address identifies a manycast client. (Supports both IPv4 and IPv6).
"
::= { hwNtpManycastClientEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.19.1.4
hwNtpManycastClientAuthKeyId OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the authentication key ID number used while sending messages to the manycast servers.
0 indicates not configured."
::= { hwNtpManycastClientEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.19.1.5
hwNtpManycastClientTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the TTL of a manycast packet. Each time a manycast packet is forwarded,
TTL value is increased starting from 1 till the configured or default value is reached. When the TTL value reaches configured or default value, the device does not forward the manycast packet.
Range: 1-255
Default: 255"
::= { hwNtpManycastClientEntry 5 }
-- 1.3.6.1.4.1.2011.6.4.2.19.1.6
hwNtpManycastClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete
and query operations. In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpManycastClientEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.20
hwNtpManycastServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpManycastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"hwNtpManycastServer table specifies ntp service manycast server configuration, we can specify an interface on
the local device to receive NTP manycast packets. The local device is run in the manycast server mode.
The manycast server responds to manycast client packets.
Based on the response, manycast client creates ephemeral association and works in client server mode.
If we configure manycast server on the current interface, it is ready to receive NTP manycast messages
and the local device runs in the server mode. When we remove manycast server configuration and multicast
IP address is not specified then local device searches for default IP addresses.
The manycast server with default IP address is 224.0.1.1 in IPv4 network and FFOE::101 in IPv6 address.
If the local device finds the default IP address, this command cancels the manycast server configuration,
else it does not perform any action.
"
::= { hwNtpObject 20 }
-- 1.3.6.1.4.1.2011.6.4.2.20.1
hwNtpManycastServerEntry OBJECT-TYPE
SYNTAX HwNtpManycastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"hwNtpManycastServer table specifies ntp service manycast server configuration, we can specify an interface on
the local device to receive NTP manycast packets. The local device is run in the manycast server mode.
The manycast server responds to manycast client packets.
Based on the response, manycast client creates ephemeral association and works in client server mode.
If we configure manycast server on the current interface, it is ready to receive NTP manycast messages
and the local device runs in the server mode. When we remove manycast server configuration and multicast
IP address is not specified then local device searches for default IP addresses.
The manycast server with default IP address is 224.0.1.1 in IPv4 network and FFOE::101 in IPv6 address.
If the local device finds the default IP address, this command cancels the manycast server configuration,
else it does not perform any action.
The indexes of this entry are hwNtpManycastServerIfName, hwNtpManycastServerIpType and hwNtpManycastServerIp."
INDEX { hwNtpManycastServerIfName, hwNtpManycastServerIpType, hwNtpManycastServerIp }
::= { hwNtpManycastServerTable 1 }
HwNtpManycastServerEntry ::=
SEQUENCE {
hwNtpManycastServerIfName
OCTET STRING,
hwNtpManycastServerIpType
InetAddressType,
hwNtpManycastServerIp
InetAddress,
hwNtpManycastServerRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.20.1.1
hwNtpManycastServerIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the interface name to configure generic manycast server.
"
::= { hwNtpManycastServerEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.20.1.2
hwNtpManycastServerIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the type of the manycast IP address, that is, IPv4 or IPv6.
For IPv4 value is 1 and for IPv6 value is 2."
::= { hwNtpManycastServerEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.20.1.3
hwNtpManycastServerIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the manycast server for receiving manycast packets.
The IP address can only be a class-D address. This IP address identifies a manycast server. (Supports both IPv4 and IPv6).
"
::= { hwNtpManycastServerEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.20.1.4
hwNtpManycastServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete
and query operations. In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpManycastServerEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.21
hwNtpMulticastServerGenTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpMulticastServerGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP multicast server mode. When functioning in the multicast server mode,
the local device serves as the multicast server and periodically sends multicast packets to multicast clients.
"
::= { hwNtpObject 21 }
-- 1.3.6.1.4.1.2011.6.4.2.21.1
hwNtpMulticastServerGenEntry OBJECT-TYPE
SYNTAX HwNtpMulticastServerGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP multicast server mode. When functioning in the multicast server mode,
the local device serves as the multicast server and periodically sends multicast packets to multicast clients.
The indexes of this entry are hwNtpMulticastServerGenIfName, hwNtpMulticastServerGenAddressType and hwNtpMulticastServerGenAddr.
"
INDEX { hwNtpMulticastServerGenIfName, hwNtpMulticastServerGenAddressType, hwNtpMulticastServerGenAddr }
::= { hwNtpMulticastServerGenTable 1 }
HwNtpMulticastServerGenEntry ::=
SEQUENCE {
hwNtpMulticastServerGenIfName
OCTET STRING,
hwNtpMulticastServerGenAddressType
InetAddressType,
hwNtpMulticastServerGenAddr
InetAddress,
hwNtpMulticastServerGenVersion
Integer32,
hwNtpMulticastServerGenAuthKeyid
Unsigned32,
hwNtpMulticastServerGenTTL
Integer32,
hwNtpMulticastServerGenRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.21.1.1
hwNtpMulticastServerGenIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the interface name to configure generic multicast server.
"
::= { hwNtpMulticastServerGenEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.21.1.2
hwNtpMulticastServerGenAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the type of the multicast IP address, that is, IPv4 or IPv6.
For IPv4 value is 1 and for IPv6 value is 2."
::= { hwNtpMulticastServerGenEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.21.1.3
hwNtpMulticastServerGenAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the multicast server for sending multicast packets.
This IP address identifies a multicast server. (Supports both IPv4 and IPv6).
"
::= { hwNtpMulticastServerGenEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.21.1.4
hwNtpMulticastServerGenVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the NTP protocol version.
Range: 1-4 for IPv4 server
4 for IPv6 server (IPv6 supports only version 4)
Default: 3 for IPv4 server
4 for IPv6 server
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version.
"
::= { hwNtpMulticastServerGenEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.21.1.5
hwNtpMulticastServerGenAuthKeyid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the key ID for sending messages to a multicast client.
Range: 0-4294967295 for versions 1,2 and 3
Range: 0-65535 for version 4
0 indicates not configured.
The value 0 indicates that no key is configured. The key ID identifies a key.
The server and the client use the same authentication key.
"
::= { hwNtpMulticastServerGenEntry 5 }
-- 1.3.6.1.4.1.2011.6.4.2.21.1.6
hwNtpMulticastServerGenTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the TTL value of the multicast packet sent. Each time a multicast packet is forwarded,
TTL value is increased starting from 1 till the configured or default value is reached.
When the TTL value reaches configured or default value, the device does not forward the multicast packet.
Range: 1-255
Default: 16
"
::= { hwNtpMulticastServerGenEntry 6 }
-- 1.3.6.1.4.1.2011.6.4.2.21.1.7
hwNtpMulticastServerGenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete
and query operations. In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpMulticastServerGenEntry 7 }
-- 1.3.6.1.4.1.2011.6.4.2.22
hwNtpMulticastClientGenTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpMulticastClientGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the local device to function as a multicast client.
When functioning as a multicast client, the local device listens for the NTP multicast
packets sent by the server and synchronizes the local clock with the clock source.
"
::= { hwNtpObject 22 }
-- 1.3.6.1.4.1.2011.6.4.2.22.1
hwNtpMulticastClientGenEntry OBJECT-TYPE
SYNTAX HwNtpMulticastClientGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the local device to function as a multicast client.
When functioning as a multicast client, the local device listens for the NTP multicast
packets sent by the server and synchronizes the local clock with the clock source.
The indexes of this entry are hwNtpMulticastClientGenIfName, hwNtpMulticastClientGenAddressType and hwNtpMulticastClientGenAddr."
INDEX { hwNtpMulticastClientGenIfName, hwNtpMulticastClientGenAddressType, hwNtpMulticastClientGenAddr }
::= { hwNtpMulticastClientGenTable 1 }
HwNtpMulticastClientGenEntry ::=
SEQUENCE {
hwNtpMulticastClientGenIfName
OCTET STRING,
hwNtpMulticastClientGenAddressType
InetAddressType,
hwNtpMulticastClientGenAddr
InetAddress,
hwNtpMulticastClientGenRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.22.1.1
hwNtpMulticastClientGenIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the interface name to configure generic multicast client.
"
::= { hwNtpMulticastClientGenEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.22.1.2
hwNtpMulticastClientGenAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the type of the multicast IP address, that is, IPv4 or IPv6.
For IPv4 value is 1 and for IPv6 value is 2.
"
::= { hwNtpMulticastClientGenEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.22.1.3
hwNtpMulticastClientGenAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP address of the multicast client to receive multicast packets.
This IP address identifies a multicast client. (Supports both IPv4 and IPv6).
"
::= { hwNtpMulticastClientGenEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.22.1.4
hwNtpMulticastClientGenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete
and query operations. In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpMulticastClientGenEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.23
hwNtpBroadcastClientGenTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpBroadcastClientGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP broadcast client mode. When set to the broadcast
client mode, the local device listens for NTP broadcast packets and synchronizes
the local clock according to the received broadcast packets.
"
::= { hwNtpObject 23 }
-- 1.3.6.1.4.1.2011.6.4.2.23.1
hwNtpBroadcastClientGenEntry OBJECT-TYPE
SYNTAX HwNtpBroadcastClientGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP broadcast client mode. When set to the broadcast
client mode, the local device listens for NTP broadcast packets and synchronizes
the local clock according to the received broadcast packets.
The index of this entry is hwNtpBroadcastClientGenIfName.
"
INDEX { hwNtpBroadcastClientGenIfName }
::= { hwNtpBroadcastClientGenTable 1 }
HwNtpBroadcastClientGenEntry ::=
SEQUENCE {
hwNtpBroadcastClientGenIfName
OCTET STRING,
hwNtpBroadcastClientGenRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.23.1.1
hwNtpBroadcastClientGenIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the interface name to configure generic broadcast client.
"
::= { hwNtpBroadcastClientGenEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.23.1.2
hwNtpBroadcastClientGenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete
and query operations. In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpBroadcastClientGenEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.24
hwNtpBroadcastServerGenTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpBroadcastServerGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP broadcast server mode. When serving as an NTP broadcast
server, the local router periodically sends clock synchronization packets to broadcast
address 255.255.255.255 from a specified interface.
"
::= { hwNtpObject 24 }
-- 1.3.6.1.4.1.2011.6.4.2.24.1
hwNtpBroadcastServerGenEntry OBJECT-TYPE
SYNTAX HwNtpBroadcastServerGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the NTP broadcast server mode. When serving as an NTP broadcast
server, the local router periodically sends clock synchronization packets to broadcast
address 255.255.255.255 from a specified interface.
The index of this entry is hwNtpBroadcastServerGenIfName.
"
INDEX { hwNtpBroadcastServerGenIfName }
::= { hwNtpBroadcastServerGenTable 1 }
HwNtpBroadcastServerGenEntry ::=
SEQUENCE {
hwNtpBroadcastServerGenIfName
OCTET STRING,
hwNtpBroadcastServerGenVersion
Integer32,
hwNtpBroadcastServerGenAuthKeyid
Unsigned32,
hwNtpBroadcastServerGenRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.24.1.1
hwNtpBroadcastServerGenIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the interface name to configure generic broadcast server.
"
::= { hwNtpBroadcastServerGenEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.24.1.2
hwNtpBroadcastServerGenVersion OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the NTP protocol version.
Range: 1-4 for IPv4 server
4 for IPv6 server (IPv6 supports only version 4)
Default: 3 for IPv4 server
4 for IPv6 server
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version.
"
::= { hwNtpBroadcastServerGenEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.24.1.3
hwNtpBroadcastServerGenAuthKeyid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the key ID for sending messages to a broadcast client.
Range: 0-4294967295 for versions 1,2 and 3
Range: 0-65535 for version 4
0 indicates not configured.
The value 0 indicates that no key is configured. The key ID identifies a key.
The server and the client use the same authentication key.
"
::= { hwNtpBroadcastServerGenEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.24.1.4
hwNtpBroadcastServerGenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete
and query operations. In the modify operation, this leaf is not set or issued.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpBroadcastServerGenEntry 4 }
-- 1.3.6.1.4.1.2011.6.4.2.25
hwNtpInInterfaceGenTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpInInterfaceGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for enabling or disabling the NTP packet reception capability of a VLAN
interface or loopback interface.
"
::= { hwNtpObject 25 }
-- 1.3.6.1.4.1.2011.6.4.2.25.1
hwNtpInInterfaceGenEntry OBJECT-TYPE
SYNTAX HwNtpInInterfaceGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for enabling or disabling the NTP packet reception capability of a VLAN
interface or loopback interface.
The index of this entry is hwNtpInInterfaceGenIfName.
"
INDEX { hwNtpInInterfaceGenIfName }
::= { hwNtpInInterfaceGenTable 1 }
HwNtpInInterfaceGenEntry ::=
SEQUENCE {
hwNtpInInterfaceGenIfName
OCTET STRING,
hwNtpInInterfaceGenAdminStatus
INTEGER,
hwNtpInInterfaceGenAdminIPv6Status
INTEGER
}
-- 1.3.6.1.4.1.2011.6.4.2.25.1.1
hwNtpInInterfaceGenIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface name is used for enabling or disabling the NTP packet reception capability on specified interface.
"
::= { hwNtpInInterfaceGenEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.25.1.2
hwNtpInInterfaceGenAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables an ingress interface.
Options:
1. enabled(1) -indicates that the NTP IPv4 packet reception capability is enabled
2. disabled(2) -indicates that the NTP IPv4 packet reception capability is disabled
Default: enabled(1)
In the walk operation, only the disabled interfaces are displayed.
"
::= { hwNtpInInterfaceGenEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.25.1.3
hwNtpInInterfaceGenAdminIPv6Status OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables an ingress interface.
Options:
1. enabled(1) -indicates that the NTP IPv6 packet reception capability is enabled
2. disabled(2) -indicates that the NTP IPv6 packet reception capability is disabled
Default: enabled(1)
In the walk operation, only the disabled interfaces are displayed.
"
::= { hwNtpInInterfaceGenEntry 3 }
-- 1.3.6.1.4.1.2011.6.4.2.26
hwNtpServerSwitch OBJECT IDENTIFIER ::= { hwNtpObject 26 }
-- 1.3.6.1.4.1.2011.6.4.2.26.1
hwNtpIPv4ServerSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for enabling or disabling NTP IPv4 server functionality.
Options:
1. enable(1) -indicates the NTP IPv4 server functionality is enabled
2. disable(2) -indicates the NTP IPv4 server functionality is disabled
Default: enable(1)
"
::= { hwNtpServerSwitch 1 }
-- 1.3.6.1.4.1.2011.6.4.2.26.2
hwNtpIPv6ServerSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for enabling or disabling NTP IPv6 server functionality.
Options:
1. enable(1) -indicates the NTP IPv6 server functionality is enabled
2. disable(2) -indicates the NTP IPv6 server functionality is disabled
Default: enable(1)
"
::= { hwNtpServerSwitch 2 }
-- 1.3.6.1.4.1.2011.6.4.2.27
hwNtpServerSource OBJECT IDENTIFIER ::= { hwNtpObject 27 }
-- 1.3.6.1.4.1.2011.6.4.2.27.1
hwNtpServerSourceAllInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpServerSourceAllInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwNtpServerSourceAllInterface table is used to enable the ntp server to listen to all interfaces.
Currently supports all interfaces of the specified IPv4 or IPv6 address family type.
"
::= { hwNtpServerSource 1 }
-- 1.3.6.1.4.1.2011.6.4.2.27.1.1
hwNtpServerSourceAllInterfaceEntry OBJECT-TYPE
SYNTAX HwNtpServerSourceAllInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwNtpServerSourceAllInterface table is used to enable the ntp server to listen to all interfaces.
Currently supports all interfaces of the specified IPv4 or IPv6 address family type.
"
INDEX { hwNtpServerSourceAllInterfaceAddressType }
::= { hwNtpServerSourceAllInterfaceTable 1 }
HwNtpServerSourceAllInterfaceEntry ::=
SEQUENCE {
hwNtpServerSourceAllInterfaceAddressType
InetAddressType,
hwNtpServerSourceAllInterfaceRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.27.1.1.1
hwNtpServerSourceAllInterfaceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the type of the source interface's IP address, that is, IPv4 or IPv6.
For IPv4 value is 1 and for IPv6 value is 2.
"
::= { hwNtpServerSourceAllInterfaceEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.27.1.1.2
hwNtpServerSourceAllInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpServerSourceAllInterfaceEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.27.2
hwNtpServerSourceInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpServerSourceInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwNtpServerSourceInterface table is used to specify the source interface for ntp server listening.
"
::= { hwNtpServerSource 2 }
-- 1.3.6.1.4.1.2011.6.4.2.27.2.1
hwNtpServerSourceInterfaceEntry OBJECT-TYPE
SYNTAX HwNtpServerSourceInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwNtpServerSourceInterface table is used to specify the source interface for ntp server listening.
"
INDEX { hwNtpServerSourceInterfaceIfname }
::= { hwNtpServerSourceInterfaceTable 1 }
HwNtpServerSourceInterfaceEntry ::=
SEQUENCE {
hwNtpServerSourceInterfaceIfname
OCTET STRING,
hwNtpServerSourceInterfaceRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.27.2.1.1
hwNtpServerSourceInterfaceIfname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the source interface name for ntp server listening.
"
::= { hwNtpServerSourceInterfaceEntry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.27.2.1.2
hwNtpServerSourceInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpServerSourceInterfaceEntry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.27.3
hwNtpServerSourceIpv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF HwNtpServerSourceIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwNtpServerSourceIpv6Table table is used to specify the source ipv6 address for ntp server listening.
"
::= { hwNtpServerSource 3 }
-- 1.3.6.1.4.1.2011.6.4.2.27.3.1
hwNtpServerSourceIpv6Entry OBJECT-TYPE
SYNTAX HwNtpServerSourceIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwNtpServerSourceIpv6Table table is used to specify the source ipv6 address for ntp server listening.
"
INDEX { hwNtpServerSourceIpv6Addr, hwNtpServerSourceIpv6VpnName}
::= { hwNtpServerSourceIpv6Table 1 }
HwNtpServerSourceIpv6Entry ::=
SEQUENCE {
hwNtpServerSourceIpv6Addr
Ipv6Address,
hwNtpServerSourceIpv6VpnName
OCTET STRING,
hwNtpServerSourceIpv6RowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.4.2.27.3.1.1
hwNtpServerSourceIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the source ipv6 address for ntp server listening.
The IP address cannot be a multicast, loopback, link-local, site-local, or unspecified address.
"
::= { hwNtpServerSourceIpv6Entry 1 }
-- 1.3.6.1.4.1.2011.6.4.2.27.3.1.2
hwNtpServerSourceIpv6VpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is used for setting the VPN instance of the source ipv6 address.
"
::= { hwNtpServerSourceIpv6Entry 2 }
-- 1.3.6.1.4.1.2011.6.4.2.27.3.1.3
hwNtpServerSourceIpv6RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for the create, delete and query operations.
Options:
1. createAndGo(4) -specified in the create operation
2. destroy(6) -specified in the delete operation
3. active(1) -always returned in the query operation
"
::= { hwNtpServerSourceIpv6Entry 3 }
hwNtpConformance OBJECT IDENTIFIER ::= { hwNtp 3 }
hwNtpCompliances OBJECT IDENTIFIER ::= { hwNtpConformance 1 }
hwNtpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting
the Ntp-MIB."
MODULE -- this module
MANDATORY-GROUPS { hwNtpObjGroup }
::= { hwNtpCompliances 1 }
-- 1.3.6.1.4.1.2011.6.4.2.23
hwNtpObjGroup OBJECT-GROUP
OBJECTS { ntpSynInterval, hwNtpDynamicSession, hwNtpRefclockMasterStratum, hwNtpRefclockMasterRowStatus, hwNtpServiceSourceInterfaceIfType,
hwNtpServiceSourceInterfaceIfNumber, hwNtpAuthenSwitch, hwNtpAuthenAccessAcl, hwNtpAuthenAccessRowStatus, hwNtpAuthenAccessAcl6,
hwNtpAuthKeyidMD5, hwNtpAuthReliableSwitch, hwNtpAuthKeyidRowStatus, hwNtpAuthKeyidType, hwNtpAuthKeyidPassword, hwNtpUnicastServerVersion, hwNtpUnicastServerAuthKeyid,
hwNtpUnicastServerSourceIfType, hwNtpUnicastServerSourceIfNumber, hwNtpUnicastServerPreference, hwNtpUnicastServerRowStatus, hwNtpUnicastServerSourceIfName,
hwNtpUnicastPeerVersion, hwNtpUnicastPeerAuthKeyid, hwNtpUnicastPeerSourceIfType, hwNtpUnicastPeerSourceIfNumber, hwNtpUnicastPeerPreference,
hwNtpUnicastPeerRowStatus, hwNtpUnicastPeerSourceIfName, hwNtpMulticastClientRowStatus, hwNtpMulticastServerVersion, hwNtpMulticastServerAuthKeyid,
hwNtpMulticastServerTTL, hwNtpMulticastServerRowStatus, hwNtpBroadcastClientRowStatus, hwNtpBroadcastServerVersion, hwNtpBroadcastServerAuthKeyid,
hwNtpBroadcastServerRowStatus, hwNtpInInterfaceAdminStatus, hwNtpInInterfaceAdminIPv6Status, hwNtpSessionClockSourceIp, hwNtpSessionClockStratum,
hwNtpSessionReferClockID, hwNtpSessionSourceMaster, hwNtpSessionSourcePeer, hwNtpSessionSelected, hwNtpSessionCandidate,
hwNtpSessionConfigured, hwNtpSessionPoll, hwNtpSessionTimeSpending, hwNtpSessionOffset, hwNtpSessionDelay,
hwNtpSessionDisper, hwNtpSessionReach, hwNtpSessionVpnFlag, hwNtpSessionVpn, hwNtpStatusClockStatus,
hwNtpStatusClockStratum, hwNtpStatusReferenceClockID, hwNtpStatusNominalFrequency, hwNtpStatusActualFrequency, hwNtpStatusClockPrecision,
hwNtpStatusClockOffset, hwNtpStatusRootDelay, hwNtpStatusRootDispersion, hwNtpStatusPeerDispersion, hwNtpStatusReferenceTime,
hwNtpStatusReferenceClockVpn, hwNtpUniServerVersion, hwNtpUniServerAuthKeyid, hwNtpUniServerSourceIfType, hwNtpUniServerSourceIfNumber,
hwNtpUniServerPreference, hwNtpUniServerRowStatus, hwNtpUniServerMaxpoll, hwNtpUniServerMinpoll, hwNtpUniServerBurst,
hwNtpUniServerIburst, hwNtpUniServerPreempt, hwNtpUniServerSourceIfName, hwNtpUniPeerVersion, hwNtpUniPeerAuthKeyid,
hwNtpUniPeerSourceIfType, hwNtpUniPeerSourceIfNumber, hwNtpUniPeerPreference, hwNtpUniPeerRowStatus, hwNtpUniPeerMaxpoll,
hwNtpUniPeerMinpoll, hwNtpUniPeerPreempt, hwNtpUniPeerSourceIfName, hwNtpDiscardMinInterval, hwNtpDiscardAvgInterval,
hwNtpServiceSourceInterfaceVpnIfName, hwNtpServiceSourceInterfaceVpnRowStatus, hwNtpManycastClientAuthKeyId, hwNtpManycastClientTTL, hwNtpManycastClientRowStatus,
hwNtpManycastServerRowStatus, hwNtpMulticastServerGenVersion, hwNtpMulticastServerGenAuthKeyid, hwNtpMulticastServerGenTTL, hwNtpMulticastServerGenRowStatus,
hwNtpInInterfaceGenAdminIPv6Status, hwNtpInInterfaceGenAdminStatus, hwNtpAuthKeyidPassword, hwNtpBroadcastServerGenRowStatus, hwNtpAuthKeyidType,
hwNtpBroadcastServerGenAuthKeyid, hwNtpMulticastClientGenRowStatus, hwNtpBroadcastServerGenVersion, hwNtpKODStatus,
hwNtpBroadcastClientGenRowStatus, hwNtpIPv4ServerSwitch, hwNtpIPv6ServerSwitch , hwNtpServerSourceAllInterfaceRowStatus,
hwNtpServerSourceInterfaceRowStatus, hwNtpServerSourceIpv6RowStatus }
STATUS current
DESCRIPTION
"This objects are used to provide NTP functionality through MIB browser."
::= { hwNtpCompliances 2 }
END
--
-- HUAWEI-NTP-MIB.mib
--
View Git Blame Copy Permalink