WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HUAWEI-ETHERNET-OAM-MIB

6869 lines
265 KiB
Plaintext
Raw Blame History

-- ============================================================================
-- Copyright (C) 2018 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: This MIB module defines the MIB objects which provides ETHERNET
-- OAM connectivity fault management, ethernet in the First Mile
-- NMS management interfaces.
-- Reference:
-- Version: V1.63
-- ============================================================================
HUAWEI-ETHERNET-OAM-MIB DEFINITIONS ::= BEGIN
IMPORTS
huaweiMgmt
FROM HUAWEI-MIB
IpAddress, Integer32, Unsigned32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, TruthValue, MacAddress
FROM SNMPv2-TC
dot1agCfmMdIndex, dot1agCfmMaIndex, Dot1agCfmCcmInterval,
Dot1agCfmMaintAssocName, Dot1agCfmMaintAssocNameType, Dot1agCfmMpDirection,
Dot1agCfmMaintDomainNameType,Dot1agCfmMaintDomainName,Dot1agCfmMDLevel,
Dot1agCfmMhfCreation,Dot1agCfmIdPermission
FROM IEEE8021-CFM-MIB
dot3OamEventLogIndex, dot3OamEventLogTimestamp, dot3OamEventLogOui, dot3OamEventLogType, dot3OamEventLogLocation,
dot3OamEventLogWindowHi, dot3OamEventLogWindowLo, dot3OamEventLogThresholdHi, dot3OamEventLogThresholdLo,
dot3OamEventLogValue, dot3OamEventLogRunningTotal, dot3OamEventLogEventTotal
FROM DOT3-OAM-MIB
ifIndex
FROM IF-MIB
hwFrameIndex, hwSlotIndex, hwPortIndex
FROM HUAWEI-DEVICE-MIB
hwXponOntIndex
FROM HUAWEI-XPON-COMMON-MIB;
hwEthernetOAM MODULE-IDENTITY
LAST-UPDATED "201804150000Z"
ORGANIZATION "Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"This MIB module defines the MIB objects which provides ETHERNET OAM connectivity
fault management, ethernet in the First Mile NMS management interfaces."
-- Revision history
REVISION "201804150000Z"
DESCRIPTION "V1.63, modified hwOntCfmMepTransmitLbmDestMepId."
REVISION "201708250000Z"
DESCRIPTION "V1.62, added hwOntCfmMepTransmitLbmDestMepId, hwOntCfmMepTransmitLbmDestMacAddress, hwOntCfmMepTransmitLbmDestIsMepId,
hwOntCfmMepTransmitLbmDataLength, hwOntCfmMepTransmitLbmPriority, hwOntCfmMepTransmitLbmMessages, hwOntCfmMepTransmitLbmInterval,
hwOntCfmMepTransmitLbmTerminate, hwOntCfmMepLbrIn, hwOntCfmMepLbrInOutOfOrder, hwOntCfmMepTransmitLtmTargetIsMepId,
hwOntCfmMepTransmitLtmTargetMacAddress, hwOntCfmMepTransmitLtmTargetMepId, hwOntCfmMepTransmitLtmTtl, hwOntEthernetOAMTrapsVbOids,
hwOntCfmMepLbResultLbmOut, hwOntCfmMepLbResultLbrIn, hwOntCfmMepLbResultOutOfOrderLbrIn, hwOntCfmLinkTraceMipMacAddress, hwOntCfmMepLtResultOK,
hwOntEthernetOAMCommonTraps, hwOntEthernetOAMCommonTrapsPrefix, hwOntEthernetOAMLBCheckTrap, hwOntEthernetOAMLTCheckTrap, hwOntEthernetOAMLTStepCheckTrap."
REVISION "201707250000Z"
DESCRIPTION "V1.61, added hwOntCfmCcAlarmType, hwOntCfmFaultAlarmTrap, hwOntCfmFaultAlarmRecoveryTrap and hwOntCfmCcAlarmMode."
REVISION "201706150000Z"
DESCRIPTION "V1.60, added hwCfmCcAlarmType, hwCfmFaultAlarmTrap, hwCfmFaultAlarmRecoveryTrap and hwCfmCcAlarmMode."
REVISION "201706020000Z"
DESCRIPTION "V1.59, modified the default value of hwOntRemoteDetectStatus from true(1) to false(2)."
REVISION "201705230000Z"
DESCRIPTION "V1.58, added hwOntCfmMaRemoteDetectStatus,hwOntCfmMaClientLevel,hwOntCfmMaAISInterval,
hwOntCfmMepRunStatus,hwOntCfmMepHighestPrDefect,hwOntCfmMepDefects,hwOntCfmMepLowPrDef,
hwOntCfmMepIfTriggerType,hwOntCfmMepTriggerPriority,hwOntCfmMepFngAlarmTime,hwOntCfmMepFngResetTime,
hwOntCfmMepAISStatus,hwOntCfmMepRdiLowestAlarmPri,hwOntCfmMepIgnoreTLV,
hwOntRemoteDetectStatus,hwOntAlarmStatus,hwOntCFMRmepDefectTrap,hwOntCFMErrorCcmDefectTrap,
hwOntCFMXconCcmDefectTrap,hwOntCFMRDIDefectTrap,hwOntCFMRmepDefectRecoveryTrap,
hwOntCFMErrorCcmDefectRecoveryTrap,hwOntCFMXconCcmDefectRecoveryTrap,hwOntCFMRDIDefectRecoveryTrap,
hwOntCFMMacStatusDefectTrap,hwOntCFMMacStatusDefectRecoveryTrap,hwOntCFMIfTriggerDownTrap,
hwOntCFMIfTriggerDownRecoveryTrap,hwOntCFMSystemAlarmTrap,hwOntCFMSystemAlarmRecoveryTrap."
REVISION "201703040000Z"
DESCRIPTION "V1.57, added hwCfmMepRdiLowestAlarmPriority and hwCfmMepIgnoreTLV in hwCfmMepTable.
modified the value range of hwCfmMepTriggerPriority from -1,2..5 to -1,1..5."
REVISION "201601120000Z"
DESCRIPTION "V1.56, deleted BITS that is imported from SNMPv2-SMI."
REVISION "201509300000Z"
DESCRIPTION "V1.55, added hwCFMSystemAlarmTrap and hwCFMSystemAlarmRecoveryTrap."
REVISION "201508180000Z"
DESCRIPTION "V1.54, modified the value range of hwOntY1731TestId from 65536..4294967293 to 1..4294967293."
REVISION "201508030000Z"
DESCRIPTION "V1.53, modified the description of hwCfmMepTransmitLbmDestIsMepId, hwCfmMepTransmitLbTestDestIsMepId and hwCfmMepTransmitLtmTargetIsMepId."
REVISION "201504210000Z"
DESCRIPTION "V1.52, modified the enumerate of hwCfmMepDefects."
REVISION "201503230000Z"
DESCRIPTION "V1.51, deleted the value range of hwOntCfmMepEthPortId."
REVISION "201407100000Z"
DESCRIPTION "V1.50, added hwOntY1731TaskType, hwOntY1731TaskIfActive and hwOntY1731TaskIsContinue."
REVISION "201406100000Z"
DESCRIPTION "V1.49, modified the MAX-ACCESS of hwCfmMepIdentifier,
modified the enumerated values of hwCfmMaNetFormat and hwOntCfmMaNetFormat."
REVISION "201403170000Z"
DESCRIPTION "V1.48, added hwY1731TaskType, hwY1731TaskIfActive and hwY1731TaskIsContinue."
REVISION "201403100000Z"
DESCRIPTION "V1.47, modified the description of hwCfmMepDefects."
REVISION "201401280000Z"
DESCRIPTION "V1.46, modified the description of hwCfmMaAISInterval."
REVISION "201401070000Z"
DESCRIPTION "V1.45, modified the description of hwCfmMepIfTriggerType, hwCFMMacStatusDefectTrap and hwCfmMaClientLevel.
modified the value range of hwCfmMepVlantag1 from 1..4095|65535 to 1..4095|65534|65535.
modified the value range of hwCfmMipExtVlantag1 from -1|1..4095 to -1|1..4095|65534."
REVISION "201311290000Z"
DESCRIPTION "V1.44, added the hwEFMPeerExtTable.
added the hwEFMLocalExtTable."
REVISION "201310230000Z"
DESCRIPTION "V1.43, added the hwCfmMaExtTable.
added hwCfmMepTriggerPriority and hwCfmMepAISStatus in hwCfmMepTable.
added down(2) in hwCfmMepIfTriggerType of hwCfmMepTable.
added hwCFMMacStatusDefectTrap and hwCFMMacStatusDefectRecoveryTrap.
added hwCFMIfTriggerDownTrap and hwCFMIfTriggerDownRecoveryTrap."
REVISION "201309130000Z"
DESCRIPTION "V1.42, modified the value range of hwOntCfmMepEthPortId from 1..8 to -1|1..8."
REVISION "201307290000Z"
DESCRIPTION "V1.41, added hwEfmLoopbackIfForwardRecv of hwEfmLoopbackTable."
REVISION "201307190000Z"
DESCRIPTION "V1.40, added hwOntY1731RemoteMepMacAddress in hwOntY1731TestIdTable."
REVISION "201307080000Z"
DESCRIPTION "V1.39, modified the description and the size list of hwOntCfmMdIndex and hwOntCfmMaIndex."
REVISION "201307030000Z"
DESCRIPTION "V1.38, added singleSLM(6) in hwY1731CmdType of hwY1731ConfigTable."
REVISION "201307010000Z"
DESCRIPTION "V1.37, modified the value range of hwEfmLoopbackTimeout from 1..1000 to 1..86400."
REVISION "201306250000Z"
DESCRIPTION "V1.36, modified the description of hwOntCfmMaNetCcmInterval, modified the Max access of hwOntCfmMdMhfCreation, hwOntCfmMdMhfIdPermission, hwOntCfmMaCompMhfCreation and hwOntCfmMaCompIdPermission."
REVISION "201306130000Z"
DESCRIPTION "V1.35, added the hwOntCfmMdTable, hwOntCfmMaTable, hwOntCfmMepTable, hwOntCfmGlobalParaTable, hwOntY1731TestIdTable and hwOntY1731ConfigTable."
REVISION "201305220000Z"
DESCRIPTION "V1.34, modified the value range of hwCfmMepOntid from -1..254 to -1..255."
REVISION "201302180000Z"
DESCRIPTION "V1.33, modified the copyright time of this MIB."
REVISION "201302170000Z"
DESCRIPTION "V1.32, modified the description of hwCfmMaintenanceAssociationTable, hwCfmMaintenanceAssociationEntry, hwCfmMepTransmitLbTestResultOK,
hwCfmMepVpi, hwCfmMepVci, hwEfmLoopbackStatus and hwEfmLoopbackIgnoreRx."
REVISION "201212110000Z"
DESCRIPTION "V1.31, added the hwY1731TestIdTable, hwY1731ConfigTable, hwY1731SingleLossStatTable and hwY1731TwoDelayStatTable."
REVISION "201211120000Z"
DESCRIPTION "V1.30, added the hwEfmLoopbackTable."
REVISION "201206260000Z"
DESCRIPTION "V1.29, modified the description of hwCfmSubIndex and hwCfmMaNetName."
REVISION "201206060000Z"
DESCRIPTION "V1.28, modified the description of hwCfmMepGemportid."
REVISION "201203300000Z"
DESCRIPTION "V1.27, deleted the hwCfmStackUpMPMac and hwCfmStackDownMPMac.
Added the hwCfmMipMacAddress and hwCfmMipExtMacAddress.
Modified the description and reference of hwCfmMepMacAddress.
Modified the default value of hwCfmMaNetCcmInterval from 1s to 1min."
REVISION "201203030000Z"
DESCRIPTION "V1.26, modified the description of hwCfmMepHighestPrDefect and hwCfmMepDefects."
REVISION "201202150000Z"
DESCRIPTION "V1.25, modified the value range of hwCfmMepTransmitLbTestMessages from 0..12 to 0..1000."
REVISION "201201120000Z"
DESCRIPTION "V1.24, added the hwEthernetOAMEFMTraps.
Moved hwDot3OAMThresholdEventTrap, hwDot3OAMNonThresholdEventTrap and hwEFMLinkEventTrap from hwEthernetOAMTraps to hwEthernetOAMEFMTraps.
Modified the value range of hwCfmMaintenanceDomainIndexOfMA from 0..2 to 1..8.
Modified the value range of hwCfmMaintenanceAssociationIndex from 0..47 to 1..4096.
Modified the value range of hwCfmMepOntid from -1..255 to -1..254.
Modefied the value range of hwCfmMepTransmitLbTestInterval from 1..60 to 0..60.
Modified the description of hwCfmMepOntid, hwCfmMepGemIndex, hwCfmMepVlantag1, hwCfmMepVlantag2, hwCfmMepVpi and hwCfmMepVci.
"
REVISION "201112190000Z"
DESCRIPTION "V1.23, added the hwCfmMepTransmitLbTestDestMacAddress, hwCfmMepTransmitLbTestDestMepId, hwCfmMepTransmitLbTestDestIsMepId,
hwCfmMepTransmitLbTestMessages, hwCfmMepTransmitLbmTestVlanPriority, hwCfmMepTransmitLbmTestVlanDropEnable, hwCfmMepTransmitLbTestInterval,
hwCfmMepTransmitLbTestPatternType, hwCfmMepTransmitLbTestDataLength, hwCfmMepTransmitLbTestResultOK, hwCfmMepVpi, hwCfmMepVci,
hwCfmMepLbTestResultLbmOut, hwCfmMepLbTestResultLbrIn, hwCfmMepLbTestResultCRCErrorLbrIn, hwCfmMepLbTestResultBERLbrIn,
hwCfmMepLbTestResultOutOfOrderLbrIn, hwEthernetOAMLBTestCheckTrap.
Modified the description of hwCfmMipExtSubIndex."
REVISION "201111190000Z"
DESCRIPTION "V1.22, added the hwCfmMepRunStatus, hwCfmStackUpMPMac, hwCfmStackDownMPMac,
hwCfmMepTransmitLbmInterval, hwCfmMepTransmitLbmDataLength, hwCfmMepTransmitLbmTerminate, hwCfmMepLbResultOutOfOrderLbrIn
Modified hwCfmMepDefects(belongs hwCfmMepTable)value range, between 0 and 31.
Modified hwCfmMaNetFormat(belongs hwCfmMepTable)data type."
REVISION "201108160000Z"
DESCRIPTION "V1.21, added the hwCfmMipExtTable."
REVISION "201107110000Z"
DESCRIPTION "V1.20, modified the value range of hwCfmMepIfType from 1..3 to 1..4."
REVISION "201105230000Z"
DESCRIPTION "V1.19, modified the value range of hwCfmMepLtResultOK from 1..2 to 0..1."
REVISION "201104210000Z"
DESCRIPTION "V1.18, modified the description of leaves."
REVISION "201011050000Z"
DESCRIPTION "V1.17, modified the description of leaves."
REVISION "201007310000Z"
DESCRIPTION "V1.16, modified the description of hwCfmMepDirection, hwCfmMepCciEnabled, hwCfmGlobalStatus,
hwCfmMepFngAlarmTime, hwCfmMepFngResetTime, hwCfmMepTransmitLbmVlanDropEnable, hwCfmMepTransmitLtmResult,
hwCfmMepIfType, hwCfmMepIfTriggerType, hwEfmPortStatisticOperation, hwCfmRMepDetectEnabled, hwCfmMepLtResultOK.
Modified the description."
REVISION "201006260000Z"
DESCRIPTION "V1.15, modified the value range of hwCfmMepGemIndex from -1..127 to -1..1023."
REVISION "201006200000Z"
DESCRIPTION "V1.14, deleted the chinese characters in this file."
REVISION "201005310000Z"
DESCRIPTION "V1.13, added hwCfmMepLbResultLbmOut, hwCfmMepLbResultLbrIn and hwCfmMepLtResultOK for trap.
Modified the description of hwCfmMepTransmitLtmResult.
Modified binding node of hwEthernetOAMLTCheckTrap.
Modified binding node of hwEthernetOAMLBCheckTrap.
"
REVISION "201005220000Z"
DESCRIPTION "V1.12, modified the value range of hwCfmMepTransmitLbmVlanDropEnable and hwCfmMepTransmitLtmResult."
REVISION "201003220000Z"
DESCRIPTION "V1.11, modified enumeration format. Modify hwCfmMepDefects (belongs hwCfmMepTable) enumeration format.
hwCfmMepTransmitLbmMessages(belongs hwCfmMepTable)value range, between 0 and 1024.
Modified hwCfmMepOntid(belongs hwCfmMepTable)value range, between -1 and 255.
Modified hwCfmMepGemIndex(belongs hwCfmMepTable)value range, between -1 and 127.
Modified hwCfmMepVlantag1(belongs hwCfmMepTable)value range between 1 and 4095, or 65535.
Modified hwCfmMepVlantag2(belongs hwCfmMepTable)value range between 1 and 4095, or 65535.
Modified data type."
REVISION "201002020000Z"
DESCRIPTION "V1.10, modified data type and delete hwCfmLoopbackNumIn, hwCfmLinkTraceResult node etc."
REVISION "201001060000Z"
DESCRIPTION "V1.09, added hwEthernetOAMTrapsVbOids, hwEthernetOAMTraps and format the mib
file, modified data type and delete some defval value."
REVISION "200912260000Z"
DESCRIPTION "V1.08, added MIB discriptions in the creation of MEP."
REVISION "200911200000Z"
DESCRIPTION "V1.07, modified hwCfmVlanId(belongs tohwCfmMipTable) value range, between 1 and 4094. "
REVISION "200909110000Z"
DESCRIPTION "V1.06, added hwCfmMepIfType to hwcfmmeptable,hwCfmMepIfType indicates the type of the creation
of Maintenance association End Point (MEP)."
REVISION "200612070000Z"
DESCRIPTION "V1.00, Initial version"
::= { huaweiMgmt 101 }
hwEthernetOAMMibObject OBJECT IDENTIFIER ::= { hwEthernetOAM 1 }
hwCfmMaintenanceDomain OBJECT IDENTIFIER ::= { hwEthernetOAMMibObject 1 }
hwCfmMaintenanceAssociation OBJECT IDENTIFIER ::= { hwEthernetOAMMibObject 2 }
hwCfmMaintenanceAssociationEndPoint OBJECT IDENTIFIER ::= { hwEthernetOAMMibObject 3 }
hwCfmRemoteMaintenanceAssociationEndPoint OBJECT IDENTIFIER ::= { hwEthernetOAMMibObject 4 }
hwCfmMaintenanceDomainNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value to be used as the index of the MaintenanceDomain
table when the management entity wants to create a new row
in the table.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceDomain 1 }
hwCfmMaintenanceDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMaintenanceDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MaintenanceDomain table. Each row in the table
represents a different maintenance domain.
A Maintenace domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed, belonging to a single
administration. The boundary of a Maintenance Domain is
defined by a set DSAPs, each of which may become a point of
connectivity to a Service Instance.
The index of this table is hwCfmMaintenanceDomainIndex.
Need bond hwCfmMaintenanceDomainIndex,hwCfmMaintenanceDomainNameFormat,
hwCfmMaintenanceDomainName,hwCfmMaintenanceDomainLevel and hwCfmMaintenanceDomainRowStatus
when create MD.
Need bond hwCfmMaintenanceDomainIndex and hwCfmMaintenanceDomainRowStatus when delete MD.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceDomain 2 }
hwCfmMaintenanceDomainEntry OBJECT-TYPE
SYNTAX HwCfmMaintenanceDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MaintenanceDomain table. Each row in the table
represents a different maintenance domain.
A Maintenace domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed, belonging to a single
administration. The boundary of a Maintenance Domain is
defined by a set DSAPs, each of which may become a point of
connectivity to a Service Instance.
The index of this entry is hwCfmMaintenanceDomainIndex.
Need bond hwCfmMaintenanceDomainIndex,hwCfmMaintenanceDomainNameFormat,
hwCfmMaintenanceDomainName,hwCfmMaintenanceDomainLevel and hwCfmMaintenanceDomainRowStatus
when create MD.
Need bond hwCfmMaintenanceDomainIndex and hwCfmMaintenanceDomainRowStatus when delete MD.
"
REFERENCE
"802.1ag-d6.0"
INDEX { hwCfmMaintenanceDomainIndex }
::= { hwCfmMaintenanceDomainTable 1 }
HwCfmMaintenanceDomainEntry ::=
SEQUENCE
{
hwCfmMaintenanceDomainIndex
Integer32,
hwCfmMaintenanceDomainNameFormat
INTEGER,
hwCfmMaintenanceDomainName
OCTET STRING,
hwCfmMaintenanceDomainLevel
INTEGER,
hwCfmMaintenanceDomainRowStatus
RowStatus
}
hwCfmMaintenanceDomainIndex OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is index of the maintenance domain table.
It needs to be bound when create MD,query MD and delete MD.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceDomainEntry 1 }
hwCfmMaintenanceDomainNameFormat OBJECT-TYPE
SYNTAX INTEGER
{
noName(1),
dnsName(2),
macInteger(3),
string(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of CFM Maintenance Domain name.
In order to divide Maintanance Domain name from different types.
Format of the Maintenance Domain Name TLV.
Options:
1. noName(1) -indicates the format compatibled ITU-T M.1400 Carrier Code and ISO 3166 country code
2. dnsName(2) -indicates the format is DNS name
3. macInteger(3) -indicates the format is MAC address with 2-octec integer
4. string(4) -indicates the format is ASCII 33 ~ ASCII 126, except \\ / : * ? \ < > | %
"
::= { hwCfmMaintenanceDomainEntry 2 }
hwCfmMaintenanceDomainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..43))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maintenance Domain name. Each Maintenance Domain has
unique name amongst all those used or available to a
service provider or operator, and to facilitate easy
identification of administrative responsibility for the
Maintenance Domain.
Maintenance Domain names can be represented in different
formats.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceDomainEntry 3 }
hwCfmMaintenanceDomainLevel OBJECT-TYPE
SYNTAX INTEGER
{
level0 (1),
level1 (2),
level2 (3),
level3 (4),
level4 (5),
level5 (6),
level6 (7),
level7 (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MA Level for a particular Maintenance Domain.
In order to allow administrations to configure different
Maintenance Domains in the same Bridge without having to
resort to detailed inter-organizational agreements as to
which MA Levels are available for use, an administrator of
a Maintenance Domain is expected to decide which of three
roles that Maintenance Domain will play: the 'Customer'
role, the 'Service Provider' role, or the 'Operator' role.
The administrator is free to assign an MA Level to a
Maintenance Domain within the range defined in the
CfmMaLevels textual convention according to the
Maintenance Domain's role. If two administrations ae
operating Maintenance Domains using the same role in one
Bridge,then they must agree to the MA Level each will
use.
Options:
1. level0(1) -indicates the MA Level for a particular Maintenance Domain
is level0
2. level1(2) -indicates the MA Level for a particular Maintenance Domain
is level1
3. level2(3) -indicates the MA Level for a particular Maintenance Domain
is level2
4. level3(4) -indicates the MA Level for a particular Maintenance Domain
is level3
5. level4(5) -indicates the MA Level for a particular Maintenance Domain
is level4
6. level5(6) -indicates the MA Level for a particular Maintenance Domain
is level5
7. level6(7) -indicates the MA Level for a particular Maintenance Domain
is level6
8. level7(8) -indicates the MA Level for a particular Maintenance Domain
is level7
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceDomainEntry 4 }
hwCfmMaintenanceDomainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates the status of this table's entry.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operation
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceDomainEntry 5 }
hwCfmMaintenanceAssociationNextIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMaintenanceAssociationNextIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It indicates Cfm Maintenance Association next index table.
It used for showing MA index which is free.
The index of this table is hwCfmMaintenanceDomainCurrentIndexOfMA.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociation 1 }
hwCfmMaintenanceAssociationNextIndexEntry OBJECT-TYPE
SYNTAX HwCfmMaintenanceAssociationNextIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It indicates Cfm Maintenance Association next index table.
It used for showing MA index which is free.
The index of this entry is hwCfmMaintenanceDomainCurrentIndexOfMA.
"
REFERENCE
"802.1ag-d6.0"
INDEX { hwCfmMaintenanceDomainCurrentIndexOfMA }
::= { hwCfmMaintenanceAssociationNextIndexTable 1 }
HwCfmMaintenanceAssociationNextIndexEntry ::=
SEQUENCE
{
hwCfmMaintenanceDomainCurrentIndexOfMA
Integer32,
hwCfmMaintenanceAssociationNextIndex
Integer32
}
hwCfmMaintenanceDomainCurrentIndexOfMA OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the index of the current MD which the MA belongs to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationNextIndexEntry 1 }
hwCfmMaintenanceAssociationNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..47)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value to be used as the index of the MaintenanceAssociation
table when the management entity wants to create a new row
in the table,and it is free,now.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationNextIndexEntry 2 }
hwCfmMaintenanceAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMaintenanceAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Association table. Each row in the table
represents a MA. A MA a set of MEPs, each configured with
the same MAID and MA Level. It is also a full mesh of
Maintenance Entities.
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs. Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity. The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance. Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances. A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clause 18.2).
The indexes of this table are hwCfmMaintenanceDomainIndexOfMA
and hwCfmMaintenanceAssociationIndex, first index is the index
of the Maintenance Domain table. The second index is the same
as the index of the dot1agCfmMaCompEntry for the same MA.
The writable objects in this table need to be persistent upon
reboot or restart of a device.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociation 2 }
hwCfmMaintenanceAssociationEntry OBJECT-TYPE
SYNTAX HwCfmMaintenanceAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Association table. Each row in the table
represents a MA. A MA a set of MEPs, each configured with
the same MAID and MA Level. It is also a full mesh of
Maintenance Entities.
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs. Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity. The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance. Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances. A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clause 18.2).
The indexes of this entry are hwCfmMaintenanceDomainIndexOfMA
and hwCfmMaintenanceAssociationIndex, first index is the index
of the Maintenance Domain table. The second index is the same
as the index of the dot1agCfmMaCompEntry for the same MA.
The writable objects in this table need to be persistent upon
reboot or restart of a device.
"
REFERENCE
"802.1ag-d6.0"
INDEX
{
hwCfmMaintenanceDomainIndexOfMA,
hwCfmMaintenanceAssociationIndex
}
::= { hwCfmMaintenanceAssociationTable 1 }
HwCfmMaintenanceAssociationEntry ::=
SEQUENCE
{
hwCfmMaintenanceDomainIndexOfMA
Integer32,
hwCfmMaintenanceAssociationIndex
Integer32,
hwCfmMaintenanceAssociationNameFormat
INTEGER,
hwCfmMaintenanceAssociationName
OCTET STRING,
hwCfmMaintenanceAssociationVlanID
Integer32,
hwCfmMaintenanceAssociationCCInterval
INTEGER,
hwCfmMaintenanceAssociationRemoteMEPCheckStatus
INTEGER,
hwCfmMaintenanceAssociationRowStatus
RowStatus
}
hwCfmMaintenanceDomainIndexOfMA OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the index of an MD which the MA belongs to.
It is the index of the hwCfmMaintenanceAssociationTable.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEntry 1 }
hwCfmMaintenanceAssociationIndex OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the index of the hwCfmMaintenanceAssociationTable.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEntry 2 }
hwCfmMaintenanceAssociationNameFormat OBJECT-TYPE
SYNTAX INTEGER
{
vid (1),
string (2),
integer (3),
vpnid (4),
carriercode (32)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of CFM Maintenance Association name.
Format of the short MA Name TLV.
Options:
1. vid(1) -indicates the type of CFM Maintenance Association name
is vlanid
2. string(2) -indicates the type of CFM Maintenance Association name
is character string
3. integer(3) -indicates the type of CFM Maintenance Association name
is octect integer
4. vpnid(4) -indicates the type of CFM Maintenance Association name
is RFC 2685 VPN ID
5. carriercode(32) -indicates the type of CFM Maintenance Association name
carriercode
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEntry 3 }
hwCfmMaintenanceAssociationName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..43))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of CFM Maintenance Association which is unique
within a Maintenance Domain.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEntry 4 }
hwCfmMaintenanceAssociationVlanID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan related to the CFM Maintenance Association Entity.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEntry 5 }
hwCfmMaintenanceAssociationCCInterval OBJECT-TYPE
SYNTAX INTEGER
{
intervalNone (1),
interval300HZ (2),
interval10ms (3),
interval100ms (4),
interval1s (5),
interval10s (6),
interval1m (7),
interval10m (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Continuity Check Message's interval of CFM Maintenance Association Entity.
Indicates the interval at which CCMs are sent by a MEP.
Options:
1. intervalNone(1) -no CCMs are sent (disabled)
2. interval300HZ(2) -CCMs are sent every 3 1/3 milliseconds(300Hz)
3. interval10ms(3) -CCMs are sent every 10 milliseconds
4. interval100ms(4) -CCMs are sent every 100 milliseconds
5. interval1s(5) -CCMs are sent every 1 second
6. interval10s(6) -CCMs are sent every 10 seconds
7. interval1m(7) -CCMs are sent every 1 millisecond
8. interval10m(8) -CCMs are sent every 10 millisecond
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEntry 6 }
hwCfmMaintenanceAssociationRemoteMEPCheckStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RemoteMEP Check Status of CFM Maintenance Association Entity.
Options:
1. enable(1) -indicates the RemoteMEP Check Status of CFM Maintenance
Association Entity is enabled
2. disable(2) -indicates the RemoteMEP Check Status of CFM Maintenance
Association Entity is disabled
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEntry 7 }
hwCfmMaintenanceAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates status of this table's entry.
Used for create MA or delete MA.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operation
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEntry 8 }
hwCfmMaintenanceAssociationEndPointNextIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMaintenanceAssociationEndPointNextIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Cfm Maintenance Association End Point next index table.
It uses for shou MEP index which is free.
The indexes of this table are hwCfmMaintenanceDomainCurrentIndexOfMEP
and hwCfmMaintenanceAssociationCurrentIndexOfMEP.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPoint 1 }
hwCfmMaintenanceAssociationEndPointNextIndexEntry OBJECT-TYPE
SYNTAX HwCfmMaintenanceAssociationEndPointNextIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Cfm Maintenance Association End Point next index table.
It uses for shou MEP index which is free.
The indexes of this entry are hwCfmMaintenanceDomainCurrentIndexOfMEP
and hwCfmMaintenanceAssociationCurrentIndexOfMEP.
"
REFERENCE
"802.1ag-d6.0"
INDEX
{
hwCfmMaintenanceDomainCurrentIndexOfMEP,
hwCfmMaintenanceAssociationCurrentIndexOfMEP
}
::= { hwCfmMaintenanceAssociationEndPointNextIndexTable 1 }
HwCfmMaintenanceAssociationEndPointNextIndexEntry ::=
SEQUENCE
{
hwCfmMaintenanceDomainCurrentIndexOfMEP
Integer32,
hwCfmMaintenanceAssociationCurrentIndexOfMEP
Integer32,
hwCfmMaintenanceAssociationEndPointNextIndex
Integer32
}
hwCfmMaintenanceDomainCurrentIndexOfMEP OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates index of MD table which the current MEP belongs to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointNextIndexEntry 1 }
hwCfmMaintenanceAssociationCurrentIndexOfMEP OBJECT-TYPE
SYNTAX Integer32 (0..47)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates index of MA table which the current MEP belongs to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointNextIndexEntry 2 }
hwCfmMaintenanceAssociationEndPointNextIndex OBJECT-TYPE
SYNTAX Integer32 (0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value to be used as the index of the MaintenanceAssociationEndPoint
table when the management entity wants to create a new row
in the table.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointNextIndexEntry 3 }
hwCfmMaintenanceAssociationEndPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMaintenanceAssociationEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MEP table. Each row in the table represents a different MEP.
A MEP (Maintenance association End Point) is an actively managed
functional component, associated with a specific DSAP of a Service
Instance, which can generate and receive CFM frames and track
any responses. It is an end point of a single Maintenance
Association, and terminates a separate Maintenance Entity for
each of the other MEPs in the same Maintenance Association (802.1ag clause 3.17).
The indexes of this table are hwCfmMaintenanceDomainIndexOfMEP,
hwCfmMaintenanceAssociationIndexOfMEP and hwCfmMaintenanceAssociationEndPointIndex,
being the first two the indices of the Maintenance Domain and MA tables, the reason
being that a MEP is allways related to an MA and Maintenance Domain.
SNMP SMI does not allow to stat in a MIB that an object in a table is an array.
The solution is to take the index (or indexes) of the first table (or tables)
and add one or more indexes.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPoint 2 }
hwCfmMaintenanceAssociationEndPointEntry OBJECT-TYPE
SYNTAX HwCfmMaintenanceAssociationEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MEP table. Each row in the table represents a different MEP.
A MEP (Maintenance association End Point) is an actively managed
functional component, associated with a specific DSAP of a Service
Instance, which can generate and receive CFM frames and track
any responses. It is an end point of a single Maintenance
Association, and terminates a separate Maintenance Entity for
each of the other MEPs in the same Maintenance Association (802.1ag clause 3.17).
The indexes of this entry are hwCfmMaintenanceDomainIndexOfMEP,
hwCfmMaintenanceAssociationIndexOfMEP and hwCfmMaintenanceAssociationEndPointIndex,
being the first two the indices of the Maintenance Domain and MA tables, the reason
being that a MEP is allways related to an MA and Maintenance Domain.
SNMP SMI does not allow to stat in a MIB that an object in a table is an array.
The solution is to take the index (or indexes) of the first table (or tables)
and add one or more indexes.
"
REFERENCE
"802.1ag-d6.0"
INDEX
{
hwCfmMaintenanceDomainIndexOfMEP,
hwCfmMaintenanceAssociationIndexOfMEP,
hwCfmMaintenanceAssociationEndPointIndex
}
::= { hwCfmMaintenanceAssociationEndPointTable 1 }
HwCfmMaintenanceAssociationEndPointEntry ::=
SEQUENCE
{
hwCfmMaintenanceDomainIndexOfMEP
Integer32,
hwCfmMaintenanceAssociationIndexOfMEP
Integer32,
hwCfmMaintenanceAssociationEndPointIndex
Integer32,
hwCfmMaintenanceAssociationEndPointIdentifier
Integer32,
hwCfmMaintenanceAssociationEndPointPortID
Integer32,
hwCfmMaintenanceAssociationEndPointDirection
INTEGER,
hwCfmMaintenanceAssociationEndPointAdminStatus
INTEGER,
hwCfmMaintenanceAssociationEndPointPriority
Integer32,
hwCfmMaintenanceAssociationEndPointCCStatus
INTEGER,
hwCfmMaintenanceAssociationEndPointRowStatus
RowStatus,
hwCfmMaintenanceAssociationEndPointUserVlanId
Integer32
}
hwCfmMaintenanceDomainIndexOfMEP OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates index of MD table which the MEP belongs to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 1 }
hwCfmMaintenanceAssociationIndexOfMEP OBJECT-TYPE
SYNTAX Integer32 (0..47)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates index of MA table which the MEP belongs to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 2 }
hwCfmMaintenanceAssociationEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates The MEP table index.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 3 }
hwCfmMaintenanceAssociationEndPointIdentifier OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Integer that is unique among all the MEPs in the same
MA. Other definition is: a small integer, unique over a
given Maintenance Association, identifying a specific
Maintenance association End Point.
MEP Identifier is also known as the MEPID.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 4 }
hwCfmMaintenanceAssociationEndPointPortID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates Port number where this MEP is located in the Bridge.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 5 }
hwCfmMaintenanceAssociationEndPointDirection OBJECT-TYPE
SYNTAX INTEGER
{
outward(1),
inward(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates the direction in which the MEP faces on the Bridge port,
association (MEP or MIP) faces on the bridge port.
Options:
1. outward(1) -sends Continuity Check Messages away from the MAC Relay Entity.
2. inward(2) -sends Continuity Check Messages towards the MAC Relay Entity
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 6 }
hwCfmMaintenanceAssociationEndPointAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of CFM Maintenance Association End Point Entity.
Options:
1. enable(1) -indicates the administrative status of CFM Maintenance Association
End Point Entity is enable
2. disable(2) -indicates the administrative status of CFM Maintenance Association
End Point Entity is disable
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 7 }
hwCfmMaintenanceAssociationEndPointPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates the priority of Continuity Check Message.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 8 }
hwCfmMaintenanceAssociationEndPointCCStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Continuity Check status of CFM Maintenance Association End Point Entity.
Options:
1. enable(1) -indicates the continuity Check status of CFM maintenance Association
End Point Entity is enabled
2. disable(2) -indicates the continuity Check status of CFM maintenance Association
End Point Entity is disabled
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 9 }
hwCfmMaintenanceAssociationEndPointRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates status of this table's entry.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operation
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 10 }
hwCfmMaintenanceAssociationEndPointUserVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates the user-vlan ID.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmMaintenanceAssociationEndPointEntry 11 }
hwCfmRemoteMaintenanceAssociationEndPointNextIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmRemoteMaintenanceAssociationEndPointNextIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Cfm Remote Maintenance Association End Point next index table.
The indexes of this table are hwCfmMaintenanceDomainCurrentIndexOfRMEP
and hwCfmMaintenanceAssociationCurrentIndexOfRMEP.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPoint 1 }
hwCfmRemoteMaintenanceAssociationEndPointNextIndexEntry OBJECT-TYPE
SYNTAX HwCfmRemoteMaintenanceAssociationEndPointNextIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Cfm Remote Maintenance Association End Point next index table.
The indexes of this entry are hwCfmMaintenanceDomainCurrentIndexOfRMEP
and hwCfmMaintenanceAssociationCurrentIndexOfRMEP.
"
REFERENCE
"802.1ag-d6.0"
INDEX
{
hwCfmMaintenanceDomainCurrentIndexOfRMEP,
hwCfmMaintenanceAssociationCurrentIndexOfRMEP
}
::= { hwCfmRemoteMaintenanceAssociationEndPointNextIndexTable 1 }
HwCfmRemoteMaintenanceAssociationEndPointNextIndexEntry ::=
SEQUENCE
{
hwCfmMaintenanceDomainCurrentIndexOfRMEP
Integer32,
hwCfmMaintenanceAssociationCurrentIndexOfRMEP
Integer32,
hwCfmRemoteMaintenanceAssociationEndPointNextIndex
Integer32
}
hwCfmMaintenanceDomainCurrentIndexOfRMEP OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates index of an MD table the remote MEP belongs to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPointNextIndexEntry 1 }
hwCfmMaintenanceAssociationCurrentIndexOfRMEP OBJECT-TYPE
SYNTAX Integer32 (0..47)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the index of an MA table the remote MEP belongs to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPointNextIndexEntry 2 }
hwCfmRemoteMaintenanceAssociationEndPointNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value to be used as the index of the RemoteMaintenanceAssociationEndPoint
table when the management entity wants to create a new row
in the table.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPointNextIndexEntry 3 }
hwCfmRemoteMaintenanceAssociationEndPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmRemoteMaintenanceAssociationEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote MEP table. Each row in the table represents a different
remote MEP within a Maintenance Association.
The indexes of this table are hwCfmMaintenanceDomainIndexOfRMEP, hwCfmMaintenanceAssociationIndexOfRMEP
and hwCfmRemoteMaintenanceAssociationEndPointIndex.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPoint 2 }
hwCfmRemoteMaintenanceAssociationEndPointEntry OBJECT-TYPE
SYNTAX HwCfmRemoteMaintenanceAssociationEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote MEP table. Each row in the table represents a different
remote MEP within a Maintenance Association.
The indexes of this entry are hwCfmMaintenanceDomainIndexOfRMEP, hwCfmMaintenanceAssociationIndexOfRMEP
and hwCfmRemoteMaintenanceAssociationEndPointIndex.
"
REFERENCE
"802.1ag-d6.0"
INDEX
{
hwCfmMaintenanceDomainIndexOfRMEP,
hwCfmMaintenanceAssociationIndexOfRMEP,
hwCfmRemoteMaintenanceAssociationEndPointIndex
}
::= { hwCfmRemoteMaintenanceAssociationEndPointTable 1 }
HwCfmRemoteMaintenanceAssociationEndPointEntry ::=
SEQUENCE
{
hwCfmMaintenanceDomainIndexOfRMEP
Integer32,
hwCfmMaintenanceAssociationIndexOfRMEP
Integer32,
hwCfmRemoteMaintenanceAssociationEndPointIndex
Integer32,
hwCfmRemoteMaintenanceAssociationEndPointIdentifier
Integer32,
hwCfmRemoteMaintenanceAssociationEndPointMacAddress
MacAddress,
hwCfmRemoteMaintenanceAssociationEndPointRowStatus
RowStatus
}
hwCfmMaintenanceDomainIndexOfRMEP OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD table Index which the remote MEP belongs to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPointEntry 1 }
hwCfmMaintenanceAssociationIndexOfRMEP OBJECT-TYPE
SYNTAX Integer32 (0..47)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MA table Index which the remote MEP belongs to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPointEntry 2 }
hwCfmRemoteMaintenanceAssociationEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Remote MEP table Index.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPointEntry 3 }
hwCfmRemoteMaintenanceAssociationEndPointIdentifier OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Integer that is unique among all the Remote MEPs in the same
MA. MEP Identifier is also known as the RemoteMEPID.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPointEntry 4 }
hwCfmRemoteMaintenanceAssociationEndPointMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the MAC address of CFM Remote MEP.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPointEntry 5 }
hwCfmRemoteMaintenanceAssociationEndPointRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates status of this table's entry.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmRemoteMaintenanceAssociationEndPointEntry 6 }
hwCfmLoopBackTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmLoopBackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Cfm LoopBack Check table.
The indexes of this table are hwCfmLoopBackMaintenanceDomainIndex, hwCfmLoopBackMaintenanceAssociationIndex
and hwCfmLoopBackMaintenanceAssociationEndPointIndex.
"
REFERENCE
"802.1ag-d6.0"
::= { hwEthernetOAMMibObject 5 }
hwCfmLoopBackEntry OBJECT-TYPE
SYNTAX HwCfmLoopBackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Cfm LoopBack Check table.
The indexes of this entry are hwCfmLoopBackMaintenanceDomainIndex, hwCfmLoopBackMaintenanceAssociationIndex
and hwCfmLoopBackMaintenanceAssociationEndPointIndex.
"
REFERENCE
"802.1ag-d6.0"
INDEX
{
hwCfmLoopBackMaintenanceDomainIndex,
hwCfmLoopBackMaintenanceAssociationIndex,
hwCfmLoopBackMaintenanceAssociationEndPointIndex
}
::= { hwCfmLoopBackTable 1 }
HwCfmLoopBackEntry ::=
SEQUENCE
{
hwCfmLoopBackMaintenanceDomainIndex
Integer32,
hwCfmLoopBackMaintenanceAssociationIndex
Integer32,
hwCfmLoopBackMaintenanceAssociationEndPointIndex
Integer32,
hwCfmLoopBackDstMacAddress
MacAddress,
hwCfmLoopBackNumOut
Integer32,
hwCfmLoopBackInterval
INTEGER,
hwCfmLoopBackPriority
Integer32,
hwCfmLoopBackRowStatus
RowStatus
}
hwCfmLoopBackMaintenanceDomainIndex OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MDindex of the MEP is this LoopBack Message sent from.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLoopBackEntry 1 }
hwCfmLoopBackMaintenanceAssociationIndex OBJECT-TYPE
SYNTAX Integer32 (0..47)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAindex of the MEP is this LoopBack Message sent from
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLoopBackEntry 2 }
hwCfmLoopBackMaintenanceAssociationEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Which MEP is this LoopBack Message sent from.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLoopBackEntry 3 }
hwCfmLoopBackDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mac-address of the Remote MEP or MIP is this LoopBack Messages sent to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLoopBackEntry 4 }
hwCfmLoopBackNumOut OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of LoopBack Messages to send.
"
REFERENCE
"802.1ag-d6.0"
DEFVAL { 4 }
::= { hwCfmLoopBackEntry 5 }
hwCfmLoopBackInterval OBJECT-TYPE
SYNTAX INTEGER
{
interval100ms (1),
interval200ms (2),
interval300ms (3),
interval400ms (4),
interval500ms (5),
interval600ms (6),
interval700ms (7),
interval800ms (8),
interval900ms (9),
interval1000ms (10),
interval1100ms (11),
interval1200ms (12),
interval1300ms (13),
interval1400ms (14),
interval1500ms (15),
interval1600ms (16),
interval1700ms (17),
interval1800ms (18),
interval1900ms (19),
interval2000ms (20)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval of LoopBack Messages to send.
Options:
1. interval100ms(1) -the interval of sending LoopBack Messages is 100ms
2. interval200ms(2) -the interval of sending LoopBack Messages is 200ms
3. interval300ms(3) -the interval of sending LoopBack Messages is 300ms
4. interval400ms(4) -the interval of sending LoopBack Messages is 400ms
5. interval500ms(5) -the interval of sending LoopBack Messages is 500ms
6. interval600ms(6) -the interval of sending LoopBack Messages is 600ms
7. interval700ms(7) -the interval of sending LoopBack Messages is 700ms
8. interval800ms(8) -the interval of sending LoopBack Messages is 800ms
9. interval900ms(9) -the interval of sending LoopBack Messages is 900ms
10. interval1000ms(10) -the interval of sending LoopBack Messages is 1000ms
11. interval1100ms(11) -the interval of sending LoopBack Messages is 1100ms
12. interval1200ms(12) -the interval of sending LoopBack Messages is 1200ms
13. interval1300ms(13) -the interval of sending LoopBack Messages is 1300ms
14. interval1400ms(14) -the interval of sending LoopBack Messages is 1400ms
15. interval1500ms(15) -the interval of sending LoopBack Messages is 1500ms
16. interval1600ms(16) -the interval of sending LoopBack Messages is 1600ms
17. interval1700ms(17) -the interval of sending LoopBack Messages is 1700ms
18. interval1800ms(18) -the interval of sending LoopBack Messages is 1800ms
19. interval1900ms(19) -the interval of sending LoopBack Messages is 1900ms
20. interval2000ms(20) -the interval of sending LoopBack Messages is 2000ms
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLoopBackEntry 6 }
hwCfmLoopBackPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of LoopBack Messages to send.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLoopBackEntry 7 }
hwCfmLoopBackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this table's entry.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLoopBackEntry 8 }
hwCfmLinkTraceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmLinkTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The LinkTrace Check table.
The indexes of this table are hwCfmLinkTraceMaintenanceDomainIndex, hwCfmLinkTraceMaintenanceAssociationIndex
and hwCfmLinkTraceMaintenanceAssociationEndPointIndex.
"
REFERENCE
"802.1ag-d6.0"
::= { hwEthernetOAMMibObject 6 }
hwCfmLinkTraceEntry OBJECT-TYPE
SYNTAX HwCfmLinkTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The LinkTrace Check table.
The indexes of this entry are hwCfmLinkTraceMaintenanceDomainIndex, hwCfmLinkTraceMaintenanceAssociationIndex
and hwCfmLinkTraceMaintenanceAssociationEndPointIndex.
"
REFERENCE
"802.1ag-d6.0"
INDEX
{
hwCfmLinkTraceMaintenanceDomainIndex,
hwCfmLinkTraceMaintenanceAssociationIndex,
hwCfmLinkTraceMaintenanceAssociationEndPointIndex
}
::= { hwCfmLinkTraceTable 1 }
HwCfmLinkTraceEntry ::=
SEQUENCE
{
hwCfmLinkTraceMaintenanceDomainIndex
Integer32,
hwCfmLinkTraceMaintenanceAssociationIndex
Integer32,
hwCfmLinkTraceMaintenanceAssociationEndPointIndex
Integer32,
hwCfmLinkTraceDstMacAddress
MacAddress,
hwCfmLinkTracePriority
Integer32,
hwCfmLinkTraceRowStatus
RowStatus,
hwCfmLinkTraceTtl
Integer32
}
hwCfmLinkTraceMaintenanceDomainIndex OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MDindex of the MEP is this LinkTrace Message sent from.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLinkTraceEntry 1 }
hwCfmLinkTraceMaintenanceAssociationIndex OBJECT-TYPE
SYNTAX Integer32 (0..47)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAindex of the MEP is this LinkTrace Message sent from.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLinkTraceEntry 2 }
hwCfmLinkTraceMaintenanceAssociationEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Which Remote MEP is this LinkTrace Message sent from.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLinkTraceEntry 3 }
hwCfmLinkTraceDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mac-address of the Remote MEP or MIP is this LinkTrace Message sent to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLinkTraceEntry 4 }
hwCfmLinkTracePriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Priority of the Remote MEP or MIP is this LinkTrace Message sent to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLinkTraceEntry 5 }
hwCfmLinkTraceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this table's entry.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operation
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLinkTraceEntry 6 }
hwCfmLinkTraceTtl OBJECT-TYPE
SYNTAX Integer32 (64..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TTL of the Remote MEP or MIP is this LinkTrace Message sent to.
"
REFERENCE
"802.1ag-d6.0"
::= { hwCfmLinkTraceEntry 7 }
hwCfmGlobalStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifies the global status of the CFM function.
Options:
1. enable(1) -indicates the global status of the CFM function is enable
2. disable(2) -indicates the global status of the CFM function is disable
Default: disable(2)
"
REFERENCE
"802.1ag-d6.0"
::= { hwEthernetOAMMibObject 7 }
hwCfmBaseMulticastMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfm base multi-cast MAC address.
"
REFERENCE
"802.1ag-d6.0"
::= { hwEthernetOAMMibObject 8 }
hwCfmSnmpAlarmGlobalStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the host to NMS alarm status of the system.
Options:
1. enable(1) -indicates the host of NMS alarm status of the system is enable
2. disable(2) -indicates the host of NMS alarm status of the system is disable
Default: enable(1)
"
REFERENCE
"802.1ag-d6.0"
::= { hwEthernetOAMMibObject 9 }
hwCfmRemoteMEPCheckGlobalStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the current RMEP detection status.
Options:
1. enable(1) -indicates the current RMEP detection status is enable
2. disable(2) -indicates the current RMEP detection status is disable
Default: disable(2).
"
REFERENCE
"802.1ag-d6.0"
::= { hwEthernetOAMMibObject 10 }
hwCfmEtherType OBJECT-TYPE
SYNTAX Integer32 (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfm ethertype.
"
REFERENCE
"802.1ag-2007 for access network private"
::= { hwEthernetOAMMibObject 11 }
hwCfmMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sets an MEP, including creating an MEP, deleting an MEP, and disabling the joint switchover switch of an MEP.
The indexes of this table are dot1agCfmMdIndex, dot1agCfmMaIndex and hwCfmMepIdentifier.
"
REFERENCE
"802.1ag clauses 12.14.7 and 19.2"
::= { hwEthernetOAMMibObject 12 }
hwCfmMepEntry OBJECT-TYPE
SYNTAX HwCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sets an MEP, including creating an MEP, deleting an MEP, and disabling the joint switchover switch of an MEP.
The indexes of this entry are dot1agCfmMdIndex, dot1agCfmMaIndex and hwCfmMepIdentifier.
"
INDEX
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
::= { hwCfmMepTable 1 }
HwCfmMepEntry ::=
SEQUENCE
{
hwCfmMepIdentifier
Integer32,
hwCfmMepIfIndex
Integer32,
hwCfmMepDirection
Dot1agCfmMpDirection,
hwCfmMepPrimaryVid
Unsigned32,
hwCfmMepActive
TruthValue,
hwCfmMepFngState
Integer32,
hwCfmMepCciEnabled
TruthValue,
hwCfmMepCcmLtmPriority
Unsigned32,
hwCfmMepMacAddress
MacAddress,
hwCfmMepLowPrDef
Integer32,
hwCfmMepFngAlarmTime
Integer32,
hwCfmMepFngResetTime
Integer32,
hwCfmMepHighestPrDefect
Integer32,
hwCfmMepDefects
BITS,
hwCfmMepErrorCcmLastFailure
OCTET STRING,
hwCfmMepXconCcmLastFailure
OCTET STRING,
hwCfmMepCcmSequenceErrors
Counter32,
hwCfmMepCciSentCcms
Counter32,
hwCfmMepNextLbmTransId
Unsigned32,
hwCfmMepLbrIn
Counter32,
hwCfmMepLbrInOutOfOrder
Counter32,
hwCfmMepLbrBadMsdu
Counter32,
hwCfmMepLtmNextSeqNumber
Unsigned32,
hwCfmMepUnexpLtrIn
Counter32,
hwCfmMepLbrOut
Counter32,
hwCfmMepTransmitLbmStatus
TruthValue,
hwCfmMepTransmitLbmDestMacAddress
MacAddress,
hwCfmMepTransmitLbmDestMepId
Integer32,
hwCfmMepTransmitLbmDestIsMepId
INTEGER,
hwCfmMepTransmitLbmMessages
Integer32,
hwCfmMepTransmitLbmDataTlv
OCTET STRING,
hwCfmMepTransmitLbmVlanPriority
Integer32,
hwCfmMepTransmitLbmVlanDropEnable
INTEGER,
hwCfmMepTransmitLbmResultOK
TruthValue,
hwCfmMepTransmitLbmSeqNumber
Unsigned32,
hwCfmMepTransmitLtmStatus
TruthValue,
hwCfmMepTransmitLtmFlags
BITS,
hwCfmMepTransmitLtmTargetMacAddress
MacAddress,
hwCfmMepTransmitLtmTargetMepId
Integer32,
hwCfmMepTransmitLtmTargetIsMepId
INTEGER,
hwCfmMepTransmitLtmTtl
Unsigned32,
hwCfmMepTransmitLtmResult
INTEGER,
hwCfmMepTransmitLtmSeqNumber
Unsigned32,
hwCfmMepTransmitLtmEgressIdentifier
OCTET STRING,
hwCfmMepRowStatus
RowStatus,
hwCfmMepGemportid
Unsigned32,
hwCfmMepOntid
Integer32,
hwCfmMepGemIndex
Integer32,
hwCfmMepVlantag1
Integer32,
hwCfmMepVlantag2
Integer32,
hwCfmMepIfType
INTEGER,
hwCfmMepIfTriggerType
INTEGER,
hwCfmMepRunStatus
TruthValue,
hwCfmMepTransmitLbmInterval
Integer32,
hwCfmMepTransmitLbmDataLength
Integer32,
hwCfmMepTransmitLbmTerminate
INTEGER,
hwCfmMepTransmitLbTestDestMacAddress
MacAddress,
hwCfmMepTransmitLbTestDestMepId
Integer32,
hwCfmMepTransmitLbTestDestIsMepId
INTEGER,
hwCfmMepTransmitLbTestMessages
Integer32,
hwCfmMepTransmitLbmTestVlanPriority
Integer32,
hwCfmMepTransmitLbmTestVlanDropEnable
INTEGER,
hwCfmMepTransmitLbTestInterval
Integer32,
hwCfmMepTransmitLbTestPatternType
INTEGER,
hwCfmMepTransmitLbTestDataLength
Integer32,
hwCfmMepTransmitLbTestResultOK
TruthValue,
hwCfmMepVpi
Integer32,
hwCfmMepVci
Integer32,
hwCfmMepTriggerPriority
Integer32,
hwCfmMepAISStatus
INTEGER,
hwCfmMepRdiLowestAlarmPriority
Integer32,
hwCfmMepIgnoreTLV
BITS
}
hwCfmMepIdentifier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the MEP index.
Range: 1-8191
"
REFERENCE
"802.1ag clauses 3.19, 19.2 and 12.14.7"
::= { hwCfmMepEntry 1 }
hwCfmMepIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the flag of port bound to an MEP, and the value is obtained through
the ifIndex algorithm according to the shelf ID, slot ID, and port ID.
-1 indicates an invalid value for ifIndex.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:b"
::= { hwCfmMepEntry 2 }
hwCfmMepDirection OBJECT-TYPE
SYNTAX Dot1agCfmMpDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the MEP direction.
Options:
1. down(1) -indicates the MEP direction is down
2. up(2) -indicates the MEP direction is up
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:c and 19.2.
The value can be one of the following:
down(1) -Down direction.
up(2) -Up direction.
"
::= { hwCfmMepEntry 3 }
hwCfmMepPrimaryVid OBJECT-TYPE
SYNTAX Unsigned32(0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the VLAN ID of the MEP.
Range: 0-4094
0 indicates that the MEP is not associated with any VLAN.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:d"
::= { hwCfmMepEntry 4 }
hwCfmMepActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the enable status of the MEP.
Options:
1. true(1) -indicates the MEP is enabled
2. false(2) -indicates the MEP is disabled
Default: true(1)
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:e and 20.9.1"
DEFVAL { true }
::= { hwCfmMepEntry 5 }
hwCfmMepFngState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the fault status of an MEP. Currently, it is not supported and 0 is always returned.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:f and 20.35"
::= { hwCfmMepEntry 6 }
hwCfmMepCciEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the CC message sending function status of the MEP.
Options:
1. true(1) -indicates the CC message sending function of the MEP is enabled
2. false(2) -indicates the CC message sending function of the MEP is disabled
Default: true(1)
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:g and 20.10.1"
DEFVAL { true }
::= { hwCfmMepEntry 7 }
hwCfmMepCcmLtmPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the level of CCMs/LTMs sent by the MEP.
Range: 0-7
Default: 7
"
REFERENCE
"802.1ag clause 12.14.7.1.3:h"
::= { hwCfmMepEntry 8 }
hwCfmMepMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the MAC address of the MEP.
"
REFERENCE
"802.1ag clause J.6 MP addressing"
::= { hwCfmMepEntry 9 }
hwCfmMepLowPrDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the lowest defect priority of the MEP.
Range: 1-6
Default: 2
"
REFERENCE
"802.1ag clause 12.14.7.1.3:k and 20.9.5 and Table 20-1"
DEFVAL { macRemErrXcon }
::= { hwCfmMepEntry 10}
hwCfmMepFngAlarmTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the alarm waiting time of the MEP, in the unit of millisecond.
Range: 2500-10000
Unit: millisecond
Default: 2500
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:l and 20.33.3"
::= { hwCfmMepEntry 11 }
hwCfmMepFngResetTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the recovery alarm waiting time of the MEP, in the unit of millisecond.
Range: 2500-10000
Unit: millisecond
Default: 10000
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:m and 20.33.4 "
::= { hwCfmMepEntry 12 }
hwCfmMepHighestPrDefect OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the highest defect priority of the MEP.
Options:
1.none(0) -indicates no defects
2.defRDICCM(1) -indicates the RDI defect
3.defMACstatus(2) -indicates the port status defect
4.defRemoteCCM(3) -indicates the remote CCM loss defect
5.defUnexpectedMepId(1025) -indicates the unexpected mep id defect
6.defUnexpectedPeriod(1026) -indicates the unexpected period defect
7.defUnexpectedLevel(1028) -indicates the unexpected level defect
8.defUnexpectedMaId(1029) -indicates the unexpected ma id defect
"
REFERENCE
"802.1ag clause 12.14.7.1.3:n 20.33.9 and Table 21-1"
::= { hwCfmMepEntry 13 }
hwCfmMepDefects OBJECT-TYPE
SYNTAX BITS
{
bDefRDICCM(0),
bDefMACStatus(1),
bDefRemoteCCM(2),
bDefErrorCCM(3),
bDefXconCCM(4),
reserved5(5),
reserved6(6),
reserved7(7),
reserved8(8),
reserved9(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
reserved14(14),
reserved15(15),
reserved16(16),
reserved17(17),
reserved18(18),
reserved19(19),
reserved20(20),
reserved21(21),
reserved22(22),
reserved23(23),
reserved24(24),
reserved25(25),
reserved26(26),
bDefLock(27),
bDefUnexpectedMepId(28),
bDefUnexpectedPeriod(29),
bDefUnexpectedLevel(30),
bDefUnexpectedMaId(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the defect status of the MEP.
Options:
1. bDefRDICCM(0) -indicates the RDI defect
2. bDefMACStatus(1) -indicates the port status defect
3. bDefRemoteCCM(2) -indicates the remote CCM loss defect
4. bDefErrorCCM(3) -indicates the CCM error defect
5. bDefXconCCM(4) -indicates the cross error defect
6. bDefLock(27) -indicates the lock defect
7. bDefUnexpectedMepId(28) -indicates the unexpected mep id defect
8. bDefUnexpectedPeriod(29) -indicates the unexpected period defect
9. bDefUnexpectedLevel(30) -indicates the unexpected level defect
10.bDefUnexpectedMaId (31) -indicates the unexpected ma id defect
"
REFERENCE
".1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q,
12.14.7.1.3:r, 12.14.7.1.3:s, 20.21.3, 20.23.3, 20.33.5,
20.33.6, 20.33.7."
::= { hwCfmMepEntry 14 }
hwCfmMepErrorCcmLastFailure OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..1522))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the last CC error packet received by the MEP.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:t and 20.21.2"
::= { hwCfmMepEntry 15 }
hwCfmMepXconCcmLastFailure OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..1522))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the last crossing error packet received by the MEP.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:u and 20.23.2"
::= { hwCfmMepEntry 16 }
hwCfmMepCcmSequenceErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of packets with incorrect sequence number received by the MEP.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:v and 20.16.12"
::= { hwCfmMepEntry 17 }
hwCfmMepCciSentCcms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of CCM packets sent by the MEP.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:w and 20.10.2"
::= { hwCfmMepEntry 18 }
hwCfmMepNextLbmTransId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the SN of the next LBM sent by the MEP.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:x and 20.28.2"
::= { hwCfmMepEntry 19 }
hwCfmMepLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of correct LBRs received by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:y and 20.31.1"
::= { hwCfmMepEntry 20 }
hwCfmMepLbrInOutOfOrder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of LBRs with incorrect SNs received by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:z and 20.31.1"
::= { hwCfmMepEntry 21 }
hwCfmMepLbrBadMsdu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of LBRs with incorrect source MAC addresses received by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:aa 20.2.3"
::= { hwCfmMepEntry 22}
hwCfmMepLtmNextSeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the SN of the next LTM sent by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:ab and 20.36.1"
::= { hwCfmMepEntry 23 }
hwCfmMepUnexpLtrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of invalid LTRs received by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:ac 20.39.1"
::= { hwCfmMepEntry 24 }
hwCfmMepLbrOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of LBRs sent by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:ad and 20.26.2"
::= { hwCfmMepEntry 25 }
hwCfmMepTransmitLbmStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the LB identifier of the MEP.
"
::= { hwCfmMepEntry 26 }
hwCfmMepTransmitLbmDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the destination MAC address of LB performed by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:b"
::= { hwCfmMepEntry 27 }
hwCfmMepTransmitLbmDestMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the ID of the destination MEP that performs LB.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:b"
::= { hwCfmMepEntry 28 }
hwCfmMepTransmitLbmDestIsMepId OBJECT-TYPE
SYNTAX INTEGER
{
invalid (0),
true (1),
false (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether LB is performed by an MEP ID.
Options:
1. invalid(0) -indicates invalide value
2. true(1) -indicates LB is performed by an MEP ID
3. false(2) -indicates LB is not performed by an MEP ID
"
REFERENCE
"802.1ag clause 12.14.7.3.2:b"
::= {hwCfmMepEntry 29 }
hwCfmMepTransmitLbmMessages OBJECT-TYPE
SYNTAX Integer32(0..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the number of LBMs sent by the MEP in LB.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:c"
DEFVAL { 1 }
::= {hwCfmMepEntry 30 }
hwCfmMepTransmitLbmDataTlv OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1500))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the DataTlv of the LBM sent by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:d"
::= { hwCfmMepEntry 31 }
hwCfmMepTransmitLbmVlanPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the priority of the LBM sent by the MEP.
Range: 0-7
The default value is the Tx priority of the CCM.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:e"
::= { hwCfmMepEntry 32 }
hwCfmMepTransmitLbmVlanDropEnable OBJECT-TYPE
SYNTAX INTEGER
{
true (1),
false (2),
invalid (0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the drop identifier of the LBM sent by the MEP.
Options:
1. true(1) -indicates the drop identifier of the LBM
is sent by the MEP
2. false(2) -indicates the drop identifier of the LBM
is not sent by the MEP
3. invalid(0) -indicates invalid value
"
REFERENCE
"802.1ag clause 12.14.7.3.2:e"
DEFVAL { true }
::= { hwCfmMepEntry 33 }
hwCfmMepTransmitLbmResultOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of LB performed by the MEP.
Options:
1. true(1) -indicates the result of LB performed by the MEP is true
2. false(2) -indicates the result of LB performed by the MEP is false
Default: true(1).
"
REFERENCE
"802.1ag clause 12.14.7.3.3:a "
::= { hwCfmMepEntry 34 }
hwCfmMepTransmitLbmSeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the SN of the first sent LBM for LB that is performed by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.3.3:a"
::= { hwCfmMepEntry 35 }
hwCfmMepTransmitLtmStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether LT is being performed by the MEP.
Options:
1. true(1) -indicates LT is performed by the MEP
2. false(2) -indicates LT is not performed by the MEP
"
::= { hwCfmMepEntry 36 }
hwCfmMepTransmitLtmFlags OBJECT-TYPE
SYNTAX BITS {
useFDBonly (0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the flag that the LTM sent by the MEP is forwarded by querying the CCM database.
Options:
1. useFDBonly(0) -indicates the LTM sent by the MEP is forwarded by querying the CCM database
"
REFERENCE
"802.1ag clause 12.14.7.4.2:b and 20.37.1"
DEFVAL { {useFDBonly } }
::= { hwCfmMepEntry 37 }
hwCfmMepTransmitLtmTargetMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the MAC address of the LTM sent by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.4.2:c"
::= { hwCfmMepEntry 38 }
hwCfmMepTransmitLtmTargetMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the target MEP ID in the LTM sent by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.4.2:c"
::= { hwCfmMepEntry 39 }
hwCfmMepTransmitLtmTargetIsMepId OBJECT-TYPE
SYNTAX INTEGER
{
invalid (0),
true (1),
false (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether LT is performed by an MEP ID.
Options:
1. invalid(0) -indicates invalid value
2. true(1) -indicates LT is performed by an MEP ID
3. false(2) -indicates LT is not performed by an MEP ID
"
REFERENCE
"802.1ag clause 12.14.7.4.2:c"
::= { hwCfmMepEntry 40 }
hwCfmMepTransmitLtmTtl OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the TTL in the transmitted TLM for LT that is performed by the MEP.
Range: 0-255
Default: 64
"
REFERENCE
"802.1ag clause 12.14.7.4.2:d and 21.8.4"
::= { hwCfmMepEntry 41 }
hwCfmMepTransmitLtmResult OBJECT-TYPE
SYNTAX INTEGER
{
true (1),
false (2),
invalid (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the operation.
Options:
1. true(1) -the Linktrace Message will be (or has been) sent
2. false(2) -the Linktrace Message will not be sent
3. invalid(0) -invalid value
Default: true(1).
"
REFERENCE
"802.1ag clause 12.14.7.4.3:a "
::= { hwCfmMepEntry 42 }
hwCfmMepTransmitLtmSeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the SN of the LTM sent by the MEP.
"
REFERENCE
"802.1ag clause 12.14.7.4.3:a"
::= { hwCfmMepEntry 43 }
hwCfmMepTransmitLtmEgressIdentifier OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the egress information in the LTM sent by the MEP.
Range: a character string of 8 bytes.
Format: linktrace indicator or linktrace responder (2 bytes) + MAC address (6 bytes).
"
REFERENCE
"802.1ag clause 12.14.7.4.3:b and 21.8.8"
::= { hwCfmMepEntry 44 }
hwCfmMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status of the MEP.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operation
In the query, active(1) is returned. To create an MEP, set the row status to
createAndGo(4). To delete an MEP, set the row status to destroy(6).
"
::= { hwCfmMepEntry 45 }
hwCfmMepGemportid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the GemPortID of the GPON port, which conflicts with hwCfmMepOntid/ hwCfmMepGemIndex.
This leaf is applicable to the xPON distributing mode.
Range: 128-3999
4294967295 indicates an invalid value for Gemportid.
"
::= { hwCfmMepEntry 46 }
hwCfmMepOntid OBJECT-TYPE
SYNTAX Integer32(-1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the OntId of the xPON port. It must be input together with hwCfmMepGemIndex but
these two leaves are mutually exclusive.
This leaf is applicable to the xPON profile mode.
Range: 0-255
-1 indicates an invalid value for OntId.
"
::= { hwCfmMepEntry 47 }
hwCfmMepGemIndex OBJECT-TYPE
SYNTAX Integer32(-1..1023)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the GemIndex of the GPON port. It must be input together with hwCfmMepOntid but
these two leaves are mutually exclusive.
This leaf is applicable to the xPON profile mode.
Range: 0-1023
-1 indicates an invalid value for GemIndex.
"
::= { hwCfmMepEntry 48 }
hwCfmMepVlantag1 OBJECT-TYPE
SYNTAX Integer32(1..4095|65534|65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates vlantag1 in the CFM. It is a valid VLAN ID with the value range 1-4095.
65534 indicates that the MEP is unaware of VLAN tags.
65535 indicates that the MEP is associated with untagged VLAN.
Default: 65535
"
::= { hwCfmMepEntry 49 }
hwCfmMepVlantag2 OBJECT-TYPE
SYNTAX Integer32(1..4095|65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates vlantag2 in the CFM. It is a valid VLAN ID with the value range 1-4095.
65535 indicates an invalid value for vlantag2.
"
::= { hwCfmMepEntry 50 }
hwCfmMepIfType OBJECT-TYPE
SYNTAX INTEGER
{
port(1),
linkAggregationGroup(2),
protectGroup(3),
l2vpn(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MEP port type.
Options:
1. port(1) -indicates a port
2. linkAggregationGroup(2) -indicates an aggregation group
3. protectGroup(3) -indicates a protect group
4. l2vpn(4) -indicates a Layer 2 virtual private network
Default: port(1)
"
::= { hwCfmMepEntry 51}
hwCfmMepIfTriggerType OBJECT-TYPE
SYNTAX INTEGER
{
notify(1),
down(2),
disable(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the trigger function type of the MEP port.
Options:
1. notify(1) -indicates the associated protection switching triggered by event notification
2. down(2) -indicates that the port will be deactivated when trigger-if-down is enabled
3. disable(255) -indicates trigger function is disabled
Default: disable(255)
"
::= { hwCfmMepEntry 52}
hwCfmMepRunStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the run status of the MEP.
1. true(1) -indicates the MEP run status is up
2. false(2) -indicates the MEP run status is down
"
REFERENCE
""
::= { hwCfmMepEntry 53 }
hwCfmMepTransmitLbmInterval OBJECT-TYPE
SYNTAX Integer32 (0..60)
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the interval of the LBMs are sent by a MEP.
Unit: second
Range: 0-60
Default: 0
"
::= { hwCfmMepEntry 54 }
hwCfmMepTransmitLbmDataLength OBJECT-TYPE
SYNTAX Integer32 (0..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the length (length of tlv value) for datatlv of the LBM sent by a MEP.
Unit: byte
Range: 0-1500
"
::= { hwCfmMepEntry 55 }
hwCfmMepTransmitLbmTerminate OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
terminate(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Means to stop sending LBMs.
Options:
1. invalid(-1) -indicates invalide value
2. terminate(1) -indicates stop sending LBMs
"
::= { hwCfmMepEntry 56 }
hwCfmMepTransmitLbTestDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the destination MAC address of the LB diagnostic test."
::= { hwCfmMepEntry 57 }
hwCfmMepTransmitLbTestDestMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the destination MEP ID of the LB diagnostic test."
::= { hwCfmMepEntry 58 }
hwCfmMepTransmitLbTestDestIsMepId OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
true(1),
false(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the LB diagnostic test is performed by an MEP ID.
Options:
1. invalid(-1) -indicates invalide value
2. true(1) -indicates LB diagnostics test is performed by an MEP ID
3. false(2) -indicates LB diagnostics test is not performed by an MEP ID"
::= { hwCfmMepEntry 59 }
hwCfmMepTransmitLbTestMessages OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the number of LBMs sent by the MEP in the LB diagnostic test.
Range: 1-1000
Default: 4
0 indicates an invalid value for the number.
"
::= { hwCfmMepEntry 60 }
hwCfmMepTransmitLbmTestVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority of the LBM sent by the MEP in the LB diagnostic test.
Range: 0-7
The default value is the Tx priority of the CCM.
"
::= { hwCfmMepEntry 61 }
hwCfmMepTransmitLbmTestVlanDropEnable OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
true(1),
false(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the drop identifier of the LBM sent by the MEP in the LB diagnostic test.
Options:
1. invalid(-1) -indicates invalid value
2. true(1) -indicates the drop identifier of the LBM
is sent by the MEP
3. false(2) -indicates the drop identifier of the LBM
is not sent by the MEP
"
DEFVAL { true }
::= { hwCfmMepEntry 62 }
hwCfmMepTransmitLbTestInterval OBJECT-TYPE
SYNTAX Integer32 (0..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the interval for a MEP to send LBMs in the LB diagnostic test.
Unit: second
Range: 1-60
Default: 1
0 indicates an invalid value for interval.
"
::= { hwCfmMepEntry 63 }
hwCfmMepTransmitLbTestPatternType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
nullSignalWithOutCRC(0),
nullSignalWithCRC(1),
prbsWithOutCRC(2),
prbsWithCRC(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the sequence pattern type of test tlv in the LBM sent by a MEP in the LB diagnostic test.
Options:
1. invalid(-1) -indicates invalid value
2. nullSignalWithOutCRC(0) -indicates All-zero sequence withoutCRC
3. nullSignalWithCRC(1) -indicates All-zero sequence withCRC
4. prbsWithOutCRC(2) -indicates PRBS sequence withoutCRC
5. prbsWithCRC(3) -indicates PRBS sequence withCRC
Default: nullSignalWithOutCRC(0)
"
::= { hwCfmMepEntry 64 }
hwCfmMepTransmitLbTestDataLength OBJECT-TYPE
SYNTAX Integer32 (0..1500)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the sequence length of test tlv in the LBM sent by a MEP in the LB diagnostic test.
Unit: byte
Range: 0-1500
Default: 100
"
::= { hwCfmMepEntry 65 }
hwCfmMepTransmitLbTestResultOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the result of LB diagnostics test performed by the MEP.
Options:
1. true(1) -indicates the result of LB diagnostics test performed by the MEP is true
2. false(2) -indicates the result of LB diagnostics test performed by the MEP is false
Default: true(1).
"
::= { hwCfmMepEntry 66 }
hwCfmMepVpi OBJECT-TYPE
SYNTAX Integer32 (-1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VPI value among the ATM/xDSL service port parameters. It must be input together with hwCfmMepVci.
Range: 0-4095
-1 indicates an invalid value for VPI.
"
::= { hwCfmMepEntry 67 }
hwCfmMepVci OBJECT-TYPE
SYNTAX Integer32 (-1 | 32..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VCI value among the ATM/xDSL service port parameters. It must be input together with hwCfmMepVpi.
Range: 32-65535
-1 indicates an invalid value for VCI.
"
::= { hwCfmMepEntry 68 }
hwCfmMepTriggerPriority OBJECT-TYPE
SYNTAX Integer32(-1 | 1..5)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the lowest alarm priority to enable trigger-if-down.
Range: -1,1-5
Default: 2
-1 indicates an invalid value for trigger-if-down priority.
"
DEFVAL { macRemErrXcon }
::= { hwCfmMepEntry 69 }
hwCfmMepAISStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the AIS packet sending function is enabled.
Options:
1. enable(1) -Indicates that the AIS packet sending function is enabled
2. disable(2) -Indicates that the AIS packet sending function is disabled
Default: disable(2)
"
::= { hwCfmMepEntry 70 }
hwCfmMepRdiLowestAlarmPriority OBJECT-TYPE
SYNTAX Integer32(2..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the lowest alarm priority of generating the RDI.
Range: 2-6
Default: 2
"
DEFVAL { macRemErrXcon }
::= { hwCfmMepEntry 71 }
hwCfmMepIgnoreTLV OBJECT-TYPE
SYNTAX BITS
{
bDefInterfaceStatusTLV(0),
bDefreserved1(1),
bDefreserved2(2),
bDefreserved3(3),
bDefreserved4(4),
bDefreserved5(5),
bDefreserved6(6),
bDefreserved7(7),
bDefreserved8(8),
bDefreserved9(9),
bDefreserved10(10),
bDefreserved11(11),
bDefreserved12(12),
bDefreserved13(13),
bDefreserved14(14),
bDefreserved15(15),
bDefreserved16(16),
bDefreserved17(17),
bDefreserved18(18),
bDefreserved19(19),
bDefreserved20(20),
bDefreserved21(21),
bDefreserved22(22),
bDefreserved23(23),
bDefreserved24(24),
bDefreserved25(25),
bDefreserved26(26),
bDefreserved27(27),
bDefreserved28(28),
bDefreserved29(29),
bDefreserved30(30),
bDefreserved31(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the TLV that MEP ignores when receiving CCM packets.
Options:
1.bDefInterfaceStatusTLV(0) -indicates the Interface Status TLV
Other bits are reserved. For each bit, 1 indicates that the TLV is ignored,
and 0 indicates that the TLV is not ignored.
Default: 0
"
::= { hwCfmMepEntry 72 }
hwEthernetOAMEFMMibObject OBJECT IDENTIFIER ::= { hwEthernetOAM 2 }
hwEfmPortStatisticsMaintenanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEfmPortStatisticsMaintenanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Issues the command for collecting the packet statistics of the EFM port.
In this case, the statistics of the port can be cleared.
The index of this table is hwEfmPortIndex.
"
::= { hwEthernetOAMEFMMibObject 1 }
hwEfmPortStatisticsMaintenanceEntry OBJECT-TYPE
SYNTAX HwEfmPortStatisticsMaintenanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Issues the command for collecting the packet statistics of the EFM port.
In this case, the statistics of the port can be cleared.
The index of this entry is hwEfmPortIndex.
"
INDEX { hwEfmPortIndex }
::= { hwEfmPortStatisticsMaintenanceTable 1 }
HwEfmPortStatisticsMaintenanceEntry ::=
SEQUENCE
{
hwEfmPortIndex
Unsigned32,
hwEfmPortStatisticOperation
INTEGER
}
hwEfmPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port index.
This leaf is of the ifIndex type.
"
::= { hwEfmPortStatisticsMaintenanceEntry 1 }
hwEfmPortStatisticOperation OBJECT-TYPE
SYNTAX INTEGER { reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operation that is performed for statistics of the specified port.
Currently, only the reset operation is supported.
Options:
1. reset(1) -reset the statistics of the specified port
"
::= { hwEfmPortStatisticsMaintenanceEntry 2 }
hwEfmLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEfmLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the loopback control parameter and status of the local link.
The index of this table is ifIndex.
"
::= { hwEthernetOAMEFMMibObject 2 }
hwEfmLoopbackEntry OBJECT-TYPE
SYNTAX HwEfmLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the loopback control parameter and status of the local link.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwEfmLoopbackTable 1 }
HwEfmLoopbackEntry ::=
SEQUENCE
{
hwEfmLoopbackStatus
INTEGER,
hwEfmLoopbackIgnoreRx
INTEGER,
hwEfmLoopbackTimeout
Unsigned32,
hwEfmLoopbackIfForwardRecv
TruthValue
}
hwEfmLoopbackStatus OBJECT-TYPE
SYNTAX INTEGER
{
noLoopback(1),
initiatingLoopback(2),
remoteLoopback(3),
terminatingLoopback(4),
localLoopback(5),
unknown(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the loopback status of the OAM entity.
The function of this object is the same as that of object dot3OamLoopbackStatus.
Options:
1. noLoopback(1) -indicates no loopback in progress
2. initiatingLoopback(2) -indicates the OAM client initiates a loopback
3. remoteLoopback(3) -indicates the remote OAM entity is in loopback mode
4. terminatingLoopback(4) -indicates the local OAM client is in the process of terminating the remote loopback
5. localLoopback(5) -indicates the local OAM entity is in loopback mode
6. unknown(6) -indicates the parser and multiplexer combination is unexpected
"
::= { hwEfmLoopbackEntry 1 }
hwEfmLoopbackIgnoreRx OBJECT-TYPE
SYNTAX INTEGER
{
ignore(1),
process(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether received OAM loopback commands are processed or ignored.
The function of this object is the same as that of object dot3OamLoopbackIgnoreRx.
Options:
1. ignore(1) -indicates the received loopback commands are ignored
2. process(2) -indicates the received loopback commands are processed
"
::= { hwEfmLoopbackEntry 2 }
hwEfmLoopbackTimeout OBJECT-TYPE
SYNTAX Unsigned32(1..86400|4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the duration after which the loopback automatically stops.
Unit: sec
Range: 1-86400
Default: 4294967295
4294967295 is an invalid value, indicating that the loopback does not stop automatically.
"
::= { hwEfmLoopbackEntry 3 }
hwEfmLoopbackIfForwardRecv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the packets are discarded or forwarded in the receiving direction.
Options:
1. true(1) -indicates the packets are forwarded in the receiving direction
2. false(2) -indicates the packets are discarded in the receiving direction
Default: false(2)
"
::= { hwEfmLoopbackEntry 4 }
hwEFMPeerExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEFMPeerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the EFM remote status of stable and evaluation.
The index of this table is ifIndex.
"
::= { hwEthernetOAMEFMMibObject 3 }
hwEFMPeerExtEntry OBJECT-TYPE
SYNTAX HwEFMPeerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the EFM remote status of stable and evaluation.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwEFMPeerExtTable 1 }
HwEFMPeerExtEntry ::=
SEQUENCE
{
hwEFMPeerExtStableEvaluating
Integer32
}
hwEFMPeerExtStableEvaluating OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0x0: Remote DTE unsatisfied, discovery can not complete
0x1: Remote DTE discovery process has not completed
0x2: Remote DTE discovery process has completed
0x3: Reserved. This value shall not be sent. If the value 0x3 is received,it should be ignored and the last received value can not be changed
-1: Unknown state
"
REFERENCE "IEEE 802.3ah 57.4.1"
::= { hwEFMPeerExtEntry 1 }
hwEFMLocalExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEFMLocalExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the EFM local status of stable and evaluation.
The index of this table is ifIndex.
"
::= { hwEthernetOAMEFMMibObject 4 }
hwEFMLocalExtEntry OBJECT-TYPE
SYNTAX HwEFMLocalExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the EFM local status of stable and evaluation.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwEFMLocalExtTable 1 }
HwEFMLocalExtEntry ::=
SEQUENCE
{
hwEFMLocalExtStableEvaluating
Integer32
}
hwEFMLocalExtStableEvaluating OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0x0: Local DTE unstatisfied, Discoverty can not complete
0x1: Local DTE Discovery process has not completed
0x2: Local DTE Discovery process has completed
0x3: Reserved. This value shall not be sent. If the value 0x3 is received,it should be ignored and the last received value can not be changed
"
REFERENCE "IEEE 802.3ah 57.4.1"
::= { hwEFMLocalExtEntry 1 }
hwCfmMipTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the MIP information in the CFM and supports only the query operation on the MIP.
The indexes of this table are hwCfmIfIndex, hwCfmSubIndex and hwCfmVlanId.
"
REFERENCE
"802.1ag clauses 12.14.7 and 19.2"
::= { hwEthernetOAMMibObject 13 }
hwCfmMipEntry OBJECT-TYPE
SYNTAX HwCfmMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the MIP information in the CFM and supports only the query operation on the MIP.
The indexes of this entry are hwCfmIfIndex, hwCfmSubIndex and hwCfmVlanId.
"
INDEX
{
hwCfmIfIndex,
hwCfmSubIndex,
hwCfmVlanId
}
::= { hwCfmMipTable 1 }
HwCfmMipEntry ::=
SEQUENCE {
hwCfmIfIndex
Integer32,
hwCfmSubIndex
Integer32,
hwCfmVlanId
Integer32,
hwCfmMipLevel
Integer32,
hwCfmMipMacAddress
MacAddress
}
hwCfmIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queries the ifIndex of the MIP port, consistent with the ifIndex of a Huawei MIB.
"
REFERENCE
"802.1ag clauses 3.19, 19.2 and 12.14.7"
::= { hwCfmMipEntry 1 }
hwCfmSubIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queries the sub-index of the MIP port. In the case of a GPON port, when the system
works in the GPON old mode, issues the GEM port ID; when the system works in the
GPON new mode, issues OntId for the low 16 bits and GemIndex for the high
16 bits. In the case of an ATM/xDSL port, issues VPI for the low 16 bits and VCI for the high
16 bits. In other cases, 4294967295 (0xFFFFFFFF) is issued.
"
REFERENCE
"802.1ag clauses 3.19, 19.2 and 12.14.7"
::= { hwCfmMipEntry 2 }
hwCfmVlanId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queries the VLAN of the MIP. It is a valid VLAN ID in the range of 1-4094.
"
REFERENCE
"802.1ag clauses 3.19, 19.2 and 12.14.7"
::= { hwCfmMipEntry 3 }
hwCfmMipLevel OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the MIP level, in the range of 0-7.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:b"
::= { hwCfmMipEntry 4 }
hwCfmMipMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the MIP."
REFERENCE
"802.1ag clause J.6 MP addressing"
::= { hwCfmMipEntry 5 }
hwCfmMaNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMaNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures an MA, including creating an MA, modifying an MA, deleting an MA, and
configuring the interval for an MA to send CCMs.
The indexes of this table are dot1agCfmMdIndex and hwCfmMaIndex.
"
REFERENCE
"802.1ag clause 18.2"
::= { hwEthernetOAMMibObject 14 }
hwCfmMaNetEntry OBJECT-TYPE
SYNTAX HwCfmMaNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures an MA, including creating an MA, modifying an MA, deleting an MA, and
configuring the interval for an MA to send CCMs.
The indexes of this entry are dot1agCfmMdIndex and hwCfmMaIndex.
"
INDEX
{
dot1agCfmMdIndex,
hwCfmMaIndex
}
::= { hwCfmMaNetTable 1 }
HwCfmMaNetEntry ::=
SEQUENCE
{
hwCfmMaIndex
Unsigned32,
hwCfmMaNetFormat
INTEGER,
hwCfmMaNetName
Dot1agCfmMaintAssocName,
hwCfmMaNetCcmInterval
Dot1agCfmCcmInterval,
hwCfmRMepDetectEnabled
TruthValue,
hwCfmMaNetRowStatus
RowStatus
}
hwCfmMaIndex OBJECT-TYPE
SYNTAX Unsigned32(1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MA index, indicating an operated MA.
Range: 1-4096
"
::= { hwCfmMaNetEntry 1 }
hwCfmMaNetFormat OBJECT-TYPE
SYNTAX INTEGER
{
primaryVid(1),
charString(2),
unsignedInt16(3),
rfc2865VpnId(4),
iccBased(32)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name type of an MA name.
Options:
1. primaryVid(1) -indicates the name type of the MA name is primary VLAN ID
2. charString(2) -indicates the name type of the MA name is char string
3. unsignedInt16(3) -indicates the name type of the MA name is unsigned int16
4. rfc2865VpnId(4) -indicates the name type of the MA name is rfc2865VpnId
5. iccBased(32) -indicates the name type of the MA name is ICC-based
"
REFERENCE
"802.1ag clauses 21.6.5.4"
::= { hwCfmMaNetEntry 2 }
hwCfmMaNetName OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name of an MA.
Range: 1-45 characters.
"
REFERENCE
"802.1ag clauses 21.6.5.6, and Table 21-20"
::= { hwCfmMaNetEntry 3 }
hwCfmMaNetCcmInterval OBJECT-TYPE
SYNTAX Dot1agCfmCcmInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the Tx interval of CCMs.
Options:
1. intervalInvalid(0) -indicates the Tx interval of CCMs is invalid
2. interval300Hz(1) -indicates the Tx interval of CCMs is 300Hz
3. interval10ms(2) -indicates the Tx interval of CCMs is 10ms
4. interval100ms(3) -indicates the Tx interval of CCMs is 100ms
5. interval1s(4) -indicates the Tx interval of CCMs is 1s
6. interval10s(5) -indicates the Tx interval of CCMs is 10s
7. interval1min(6) -indicates the Tx interval of CCMs is 1 minute
8. interval10min(7) -indicates the Tx interval of CCMs is 10 minutes
Default: interval1min(6)
"
REFERENCE
"802.1ag clause 12.14.6.1.3:e"
DEFVAL { interval1min }
::= { hwCfmMaNetEntry 4 }
hwCfmRMepDetectEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the RMEP detection status of an MA.
Options:
1. true(1) -indicates the RMEP detection of an MA is on
2. false(2) -indicates the RMEP detection of an MA is off
Default: true(1)
"
REFERENCE
""
DEFVAL { true }
::= { hwCfmMaNetEntry 5 }
hwCfmMaNetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, used to create, modify, and delete an MA.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operation
In the query, active(1) is returned. To create an MA, set the row status to createAndGo(4).
To delete an MA, set the row status to destroy(6).
"
::= { hwCfmMaNetEntry 6 }
hwCfmMipExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMipExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the MIP information in the CFM and supports only the query operation on the MIP.
The indexes of this table are hwCfmMipExtIfIndex, hwCfmMipExtSubIndex, hwCfmMipExtVlanId, hwCfmMipExtIfType,
hwCfmMipExtVlantag1 and hwCfmMipExtVlantag2.
"
REFERENCE
"802.1ag clauses 12.14.7 and 19.2"
::= { hwEthernetOAMMibObject 15 }
hwCfmMipExtEntry OBJECT-TYPE
SYNTAX HwCfmMipExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the MIP information in the CFM and supports only the query operation on the MIP.
The indexes of this entry are hwCfmMipExtIfIndex, hwCfmMipExtSubIndex, hwCfmMipExtVlanId, hwCfmMipExtIfType,
hwCfmMipExtVlantag1 and hwCfmMipExtVlantag2.
"
INDEX
{
hwCfmMipExtIfIndex,
hwCfmMipExtSubIndex,
hwCfmMipExtVlanId,
hwCfmMipExtIfType,
hwCfmMipExtVlantag1,
hwCfmMipExtVlantag2
}
::= { hwCfmMipExtTable 1 }
HwCfmMipExtEntry ::=
SEQUENCE {
hwCfmMipExtIfIndex
Integer32,
hwCfmMipExtSubIndex
Integer32,
hwCfmMipExtVlanId
Integer32,
hwCfmMipExtIfType
INTEGER,
hwCfmMipExtVlantag1
Integer32,
hwCfmMipExtVlantag2
Integer32,
hwCfmMipExtLevel
Integer32,
hwCfmMipExtMacAddress
MacAddress
}
hwCfmMipExtIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queries the ifIndex of the MIP port, consistent with the ifIndex of a Huawei MIB.
"
REFERENCE
"802.1ag clauses 3.19, 19.2 and 12.14.7"
::= { hwCfmMipExtEntry 1 }
hwCfmMipExtSubIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queries the sub-index of the MIP port. In the case of a GPON port, when the system
works in the GPON old mode, issues the GEM port ID; when the system works in the
GPON new mode, issues OntId for the low 16 bits and GemIndex for the high 16 bits.
In the case of an ATM/xDSL port, issues VPI for the low 16 bits and VCI for the high
16 bits. In other cases, a value with all Fs is issued.
"
REFERENCE
"802.1ag clauses 3.19, 19.2 and 12.14.7"
::= { hwCfmMipExtEntry 2 }
hwCfmMipExtVlanId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queries the VLAN of the MIP. It is a valid VLAN ID in the range of 1-4094.
"
REFERENCE
"802.1ag clauses 3.19, 19.2 and 12.14.7"
::= { hwCfmMipExtEntry 3 }
hwCfmMipExtIfType OBJECT-TYPE
SYNTAX INTEGER
{
port(1),
l2vpn(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the MIP port type.
Options:
1. port(1) -indicates a port
4. l2vpn(2) -indicates a Layer 2 virtual private network
"
::= { hwCfmMipExtEntry 4 }
hwCfmMipExtVlantag1 OBJECT-TYPE
SYNTAX Integer32(-1|1..4095|65534)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates vlantag1 in the CFM.
It is a valid VLAN ID with the value range 1-4095.
-1 indicates an invalid value for vlantag1.
65534 indicates that the MIP is unaware of VLAN tags.
"
::= { hwCfmMipExtEntry 5 }
hwCfmMipExtVlantag2 OBJECT-TYPE
SYNTAX Integer32(-1|1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates vlantag2 in the CFM. Vlantag2 is the user-side inner VLAN.
It is a valid VLAN ID with the value range 1-4095.
-1 indicates an invalid value for vlantag2.
"
::= { hwCfmMipExtEntry 6 }
hwCfmMipExtLevel OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the MIP level, in the range of 0-7.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:b"
::= { hwCfmMipExtEntry 7 }
hwCfmMipExtMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the MIP."
REFERENCE
"802.1ag clause J.6 MP addressing"
::= { hwCfmMipExtEntry 8 }
hwY1731TestIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731TestIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the information for PM instance.
The index of this table is hwY1731TestId.
"
::= { hwEthernetOAMMibObject 16 }
hwY1731TestIdEntry OBJECT-TYPE
SYNTAX HwY1731TestIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the information for PM instance.
The index of this entry is hwY1731TestId.
"
INDEX { hwY1731TestId }
::= { hwY1731TestIdTable 1 }
HwY1731TestIdEntry ::=
SEQUENCE {
hwY1731TestId
Unsigned32,
hwY1731LocalMdIndex
Integer32,
hwY1731LocalMaIndex
Integer32,
hwY1731LocalMepId
Integer32,
hwY1731RemoteIsMepId
TruthValue,
hwY1731RemoteMepId
Integer32,
hwY1731RemoteMepMacAddress
MacAddress,
hwY1731OnwardMacAddress
MacAddress,
hwY1731BackwardMacAddress
MacAddress,
hwY1731IsUpdateOnwardMacAddress
TruthValue,
hwY1731IsUpdateBackwardMacAddress
TruthValue,
hwY1731TX8021p
Integer32,
hwY1731RX8021p
Integer32,
hwY1731TestIdRowStatus
RowStatus,
hwY1731TaskType
BITS,
hwY1731TaskIfActive
BITS,
hwY1731TaskIsContinue
BITS
}
hwY1731TestId OBJECT-TYPE
SYNTAX Unsigned32 (65536..4294967293)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the PM instance ID.
Range: 65536-4294967293
"
::= { hwY1731TestIdEntry 1 }
hwY1731LocalMdIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the local MD index.
Range: 1-8
"
::= { hwY1731TestIdEntry 2 }
hwY1731LocalMaIndex OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the local MA index.
Range: 1-4096
"
::= { hwY1731TestIdEntry 3 }
hwY1731LocalMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the local MEP ID.
Range: 1-8191
"
::= { hwY1731TestIdEntry 4 }
hwY1731RemoteIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the way of specifies the remote MEP.
Options:
1. true(1) -indicates the remote MEP by the remote MEP ID
2. false(2) -indicates the remote MEP by the MAC address of remote MEP
"
::= { hwY1731TestIdEntry 5 }
hwY1731RemoteMepId OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the remote MEP ID.
Range: -1, 1-8191
-1: indicates invalid value.
"
::= { hwY1731TestIdEntry 6 }
hwY1731RemoteMepMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the MAC address of remote MEP.
"
::= { hwY1731TestIdEntry 7 }
hwY1731OnwardMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the onward MAC address of the MEP.
"
::= { hwY1731TestIdEntry 8 }
hwY1731BackwardMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the backward MAC address of the MEP.
"
::= { hwY1731TestIdEntry 9 }
hwY1731IsUpdateOnwardMacAddress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the onward MAC learning mode.
Options:
1. true(1) -indicates the onward MAC learning mode is update
2. false(2) -indicates the onward MAC learning mode is not update
Default: false(2)
"
::= { hwY1731TestIdEntry 10 }
hwY1731IsUpdateBackwardMacAddress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the backward MAC learning mode.
Options:
1. true(1) -indicates the backward MAC learning mode is update
2. false(2) -indicates the backward MAC learning mode is not update
Default: false(2)
"
::= { hwY1731TestIdEntry 11 }
hwY1731TX8021p OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the send 802.1p value.
Range: -1-7
-1: indicates the send priority of the packets is not considered.
"
::= { hwY1731TestIdEntry 12 }
hwY1731RX8021p OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the receive 802.1p value.
Range: -1-7
-1: indicates the receive priority of the packets is not considered.
"
::= { hwY1731TestIdEntry 13 }
hwY1731TestIdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status of the PM instance.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operation
In the query, active(1) is returned. To create an PM instance, set the row status to
createAndGo(4). To delete an PM instance, set the row status to destroy(6).
"
::= { hwY1731TestIdEntry 14 }
hwY1731TaskType OBJECT-TYPE
SYNTAX BITS
{
bDefsingleLM(0),
bDefdualLM(1),
bDefonewayDM(2),
bDeftwowayDM(3),
bDeftest(4),
bDefsingleSLM(5),
bDefreserved6(6),
bDefreserved7(7),
bDefreserved8(8),
bDefreserved9(9),
bDefreserved10(10),
bDefreserved11(11),
bDefreserved12(12),
bDefreserved13(13),
bDefreserved14(14),
bDefreserved15(15),
bDefreserved16(16),
bDefreserved17(17),
bDefreserved18(18),
bDefreserved19(19),
bDefreserved20(20),
bDefreserved21(21),
bDefreserved22(22),
bDefreserved23(23),
bDefreserved24(24),
bDefreserved25(25),
bDefreserved26(26),
bDefreserved27(27),
bDefreserved28(28),
bDefreserved29(29),
bDefreserved30(30),
bDefreserved31(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the task type of the PM instance.
Options:
1. bDefsingleLM(0) -indicates the single-ended loss measurement
2. bDefdualLM(1) -indicates the dual-ended loss measurement
3. bDefonewayDM(2) -indicates the one-way time delay measurement
4. bDeftwowayDM(3) -indicates the two-way time delay measurement
5. bDeftest(4) -indicates the test loss measurement
6. bDefsingleSLM(5) -indicates the single-ended synthetic loss measurement
Other bits are reserved. For each bit, 1 indicates that the PM task is valid,
and 0 indicates that the PM task is invalid.
Default: 0.
"
::= { hwY1731TestIdEntry 15 }
hwY1731TaskIfActive OBJECT-TYPE
SYNTAX BITS
{
bDefsingleLMIfActive(0),
bDefdualLMIfActive(1),
bDefonewayDMIfActive(2),
bDeftwowayDMIfActive(3),
bDeftestIfActive(4),
bDefsingelSLMIfActive(5),
bDefreserved6(6),
bDefreserved7(7),
bDefreserved8(8),
bDefreserved9(9),
bDefreserved10(10),
bDefreserved11(11),
bDefreserved12(12),
bDefreserved13(13),
bDefreserved14(14),
bDefreserved15(15),
bDefreserved16(16),
bDefreserved17(17),
bDefreserved18(18),
bDefreserved19(19),
bDefreserved20(20),
bDefreserved21(21),
bDefreserved22(22),
bDefreserved23(23),
bDefreserved24(24),
bDefreserved25(25),
bDefreserved26(26),
bDefreserved27(27),
bDefreserved28(28),
bDefreserved29(29),
bDefreserved30(30),
bDefreserved31(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the role of the PM task.
Options:
1. bDefsingleLMIfActive(0) -indicates the role of the single-ended loss measurement
2. bDefdualLMIfActive(1) -indicates the role of the dual-ended loss measurement
3. bDefonewayDMIfActive(2) -indicates the role of the one-way time delay measurement
4. bDeftwowayDMIfActive(3) -indicates the role of the two-way time delay measurement
5. bDeftestIfActive(4) -indicates the role of the test loss measurement
6. bDefsingelSLMIfActive(5) -indicates the role of the single-ended synthetic loss measurement
Other bits are reserved. For each bit, when the corresponding bit of hwY1731TaskType is 1,
1 indicates that the role of the PM task is sender, and 0 indicates that the role of the PM task is receiver.
Default: 0.
"
::= { hwY1731TestIdEntry 16 }
hwY1731TaskIsContinue OBJECT-TYPE
SYNTAX BITS
{
bDefsingleLMIsContinue(0),
bDefdualLMIsContinue(1),
bDefonewayDMIsContinue(2),
bDeftwowayDMIsContinue(3),
bDeftestIsContinue(4),
bDefsingelSLMIsContinue(5),
bDefreserved6(6),
bDefreserved7(7),
bDefreserved8(8),
bDefreserved9(9),
bDefreserved10(10),
bDefreserved11(11),
bDefreserved12(12),
bDefreserved13(13),
bDefreserved14(14),
bDefreserved15(15),
bDefreserved16(16),
bDefreserved17(17),
bDefreserved18(18),
bDefreserved19(19),
bDefreserved20(20),
bDefreserved21(21),
bDefreserved22(22),
bDefreserved23(23),
bDefreserved24(24),
bDefreserved25(25),
bDefreserved26(26),
bDefreserved27(27),
bDefreserved28(28),
bDefreserved29(29),
bDefreserved30(30),
bDefreserved31(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating mode of the PM task.
Options:
1. bDefsingleLM(0) -indicates the operating mode of the single-ended loss measurement
2. bDefdualLM(1) -indicates the operating mode of the dual-ended loss measurement
3. bDefonewayDM(2) -indicates the operating mode of the one-way time delay measurement
4. bDeftwowayDM(3) -indicates the operating mode of the two-way time delay measurement
5. bDeftest(4) -indicates the operating mode of the test loss measurement
6. bDefsingleSLM(5) -indicates the operating mode of the single-ended synthetic loss measurement
Other bits are reserved. For each bit, when the corresponding bit of hwY1731TaskType is 1,
1 indicates that the PM task runs according to demand, and 0 indicates that the PM task runs continuously.
Default: 0.
"
::= { hwY1731TestIdEntry 17 }
hwY1731ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the information for PM Task.
The indexes of this table are hwY1731TestId and hwY1731CmdType.
"
::= { hwEthernetOAMMibObject 17 }
hwY1731ConfigEntry OBJECT-TYPE
SYNTAX HwY1731ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the information for PM Task.
The indexes of this entry are hwY1731TestId and hwY1731CmdType.
"
INDEX
{
hwY1731TestId,
hwY1731CmdType
}
::= { hwY1731ConfigTable 1 }
HwY1731ConfigEntry ::=
SEQUENCE {
hwY1731CmdType
INTEGER,
hwY1731IsContinue
TruthValue,
hwY1731CmdEnable
TruthValue,
hwY1731IfActive
TruthValue,
hwY1731Interval
INTEGER,
hwY1731Count
Unsigned32
}
hwY1731CmdType OBJECT-TYPE
SYNTAX INTEGER
{
singleLM(1),
dualLM(2),
onewayDM(3),
twowayDM(4),
test(5),
singleSLM(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the type of the PM task.
Options:
1. singleLM(1) -indicates the type of the PM task is single-ended loss measurement
2. dualLM(2) -indicates the type of the PM task is dual-ended loss measurement
3. onewayDM(3) -indicates the type of the PM task is one-way time delay measurement
4. twowayDM(4) -indicates the type of the PM task is two-way time delay measurement
5. test(5) -indicates the type of the PM task is test loss measurement
6. singleSLM(6) -indicates the type of the PM task is single-ended synthetic loss measurement
"
::= { hwY1731ConfigEntry 1 }
hwY1731IsContinue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operating mode of the PM task.
Options:
1. true(1) -indicates the PM task run continuously
2. false(2) -indicates the PM task run according to demand
Default: false(2)
"
::= { hwY1731ConfigEntry 2 }
hwY1731CmdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operating of the PM task.
Options:
1. true(1) -indicates the start operation
2. false(2) -indicates the stop operation
"
::= { hwY1731ConfigEntry 3 }
hwY1731IfActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the role of the PM task.
Options:
1. true(1) -indicates the role of the PM task is sender
2. false(2) -indicates the role of the PM task is receiver
"
::= { hwY1731ConfigEntry 4 }
hwY1731Interval OBJECT-TYPE
SYNTAX INTEGER
{
intervalInvalid(1),
interval1000ms(2),
interval10000ms(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interval time for sending PDU packets.
Options:
1. intervalInvalid(1) -indicates invalid value
2. interval1000ms(2) -indicates interval is 1000, in the unit of millisecond
3. interval10000ms(3) -indicates interval is 10000, in the unit of millisecond
"
::= { hwY1731ConfigEntry 5 }
hwY1731Count OBJECT-TYPE
SYNTAX Unsigned32 (1..1000 | 4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the count of sending packets.
Range: 1-1000, 4294967295
4294967295: indicates invalid value.
"
::= { hwY1731ConfigEntry 6 }
hwY1731SingleLossStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731SingleLossStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the single-ended LM test statistics.
The indexes of this table are hwY1731SinLMTestId, hwY1731SinLMSeq.
"
::= { hwEthernetOAMMibObject 18 }
hwY1731SingleLossStatEntry OBJECT-TYPE
SYNTAX HwY1731SingleLossStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the single-ended LM test statistics.
The indexes of this entry are hwY1731SinLMTestId, hwY1731SinLMSeq.
"
INDEX
{
hwY1731SinLMTestId,
hwY1731SinLMSeq
}
::= { hwY1731SingleLossStatTable 1 }
HwY1731SingleLossStatEntry ::=
SEQUENCE {
hwY1731SinLMTestId
Unsigned32,
hwY1731SinLMSeq
Unsigned32,
hwY1731SinLMTimeStamp
Unsigned32,
hwY1731SinLMErrInfo
INTEGER,
hwY1731SinLMLocal
Unsigned32,
hwY1731SinLMLocalRatio
Unsigned32,
hwY1731SinLMRemote
Unsigned32,
hwY1731SinLMRemoteRatio
Unsigned32
}
hwY1731SinLMTestId OBJECT-TYPE
SYNTAX Unsigned32 (65536..4294967293)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the test ID of statistics for single-ended LM.
"
::= { hwY1731SingleLossStatEntry 1 }
hwY1731SinLMSeq OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967294)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the sequence of statistics for single-ended LM.
"
::= { hwY1731SingleLossStatEntry 2 }
hwY1731SinLMTimeStamp OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time stamp of statistics for single-ended LM.
"
::= { hwY1731SingleLossStatEntry 3 }
hwY1731SinLMErrInfo OBJECT-TYPE
SYNTAX INTEGER
{
noErr(1),
lmErr(2),
lmRatioErr(3),
dmErr(4),
overturn(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the LM error type.
Options:
1. noErr(1) -No error
2. lmErr(2) -indicates the statistics for single-ended LM are incorrect
3. lmRatioErr(3) -indicates the statistics for average single-ended LM ratio are incorrect
4. dmErr(4) -indicates the statistics for two-way DM are incorrect
5. overturn(5) -indicates the value exceeds the threshold and therefore a reverse occurs
"
::= { hwY1731SingleLossStatEntry 4 }
hwY1731SinLMLocal OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics for near-end single-ended LM.
"
::= { hwY1731SingleLossStatEntry 5 }
hwY1731SinLMLocalRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ratio of statistics for near-end single-ended LM, unit:10^(-8).
"
::= { hwY1731SingleLossStatEntry 6 }
hwY1731SinLMRemote OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics for far-end single-ended LM.
"
::= { hwY1731SingleLossStatEntry 7 }
hwY1731SinLMRemoteRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ratio of statistics for far-end single-ended LM, unit:10^(-8).
"
::= { hwY1731SingleLossStatEntry 8 }
hwY1731TwoDelayStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731TwoDelayStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the two-way DM test statistics.
The indexes of this table are hwY1731TwoDMTestId, hwY1731TwoDMSeq.
"
::= { hwEthernetOAMMibObject 19 }
hwY1731TwoDelayStatEntry OBJECT-TYPE
SYNTAX HwY1731TwoDelayStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the two-way DM test statistics.
The indexes of this entry are hwY1731TwoDMTestId, hwY1731TwoDMSeq.
"
INDEX
{
hwY1731TwoDMTestId,
hwY1731TwoDMSeq
}
::= { hwY1731TwoDelayStatTable 1 }
HwY1731TwoDelayStatEntry ::=
SEQUENCE {
hwY1731TwoDMTestId
Unsigned32,
hwY1731TwoDMSeq
Unsigned32,
hwY1731TwoDMTimeStamp
Unsigned32,
hwY1731TwoDMErrInfo
INTEGER,
hwY1731TwoDMRemoteDelay
Integer32,
hwY1731TwoDMRemoteJitter
Integer32,
hwY1731TwoDMLocalDelay
Integer32,
hwY1731TwoDMLocalJitter
Integer32,
hwY1731TwoDMDelay
Integer32,
hwY1731TwoDMJitter
Integer32
}
hwY1731TwoDMTestId OBJECT-TYPE
SYNTAX Unsigned32 (65536..4294967293)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the test ID of statistics for two-way DM.
"
::= { hwY1731TwoDelayStatEntry 1 }
hwY1731TwoDMSeq OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967294)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the sequence of statistics for two-way DM.
"
::= { hwY1731TwoDelayStatEntry 2 }
hwY1731TwoDMTimeStamp OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time stamp of statistics for two-way DM.
"
::= { hwY1731TwoDelayStatEntry 3 }
hwY1731TwoDMErrInfo OBJECT-TYPE
SYNTAX INTEGER
{
noErr(1),
lmErr(2),
lmRatioErr(3),
dmErr(4),
overturn(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the DM error type.
Options:
1. noErr(1) -No error
2. lmErr(2) -indicates the statistics for single-ended LM are incorrect
3. lmRatioErr(3) -indicates the statistics for average single-ended LM ratio are incorrect
4. dmErr(4) -indicates the statistics for two-way DM are incorrect
5. overturn(5) -indicates the value exceeds the threshold and therefore a reverse occurs
"
::= { hwY1731TwoDelayStatEntry 4 }
hwY1731TwoDMRemoteDelay OBJECT-TYPE
SYNTAX Integer32 (-2147483648..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the delay of statistics for one-way-far DM, unit:us.
"
::= { hwY1731TwoDelayStatEntry 5 }
hwY1731TwoDMRemoteJitter OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the jitter of statistics for one-way-far DM, unit:us.
"
::= { hwY1731TwoDelayStatEntry 6 }
hwY1731TwoDMLocalDelay OBJECT-TYPE
SYNTAX Integer32 (-2147483648..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the delay of statistics for one-way-near DM, unit:us.
"
::= { hwY1731TwoDelayStatEntry 7 }
hwY1731TwoDMLocalJitter OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the jitter of statistics for one-way-near DM, unit:us."
::= { hwY1731TwoDelayStatEntry 8 }
hwY1731TwoDMDelay OBJECT-TYPE
SYNTAX Integer32 (-2147483648..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the delay of statistics for two-way DM, unit:us.
"
::= { hwY1731TwoDelayStatEntry 9 }
hwY1731TwoDMJitter OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the jitter of statistics for two-way DM, unit:us."
::= { hwY1731TwoDelayStatEntry 10 }
hwEthernetOAMTrapsVbOids OBJECT IDENTIFIER ::= { hwEthernetOAM 3 }
hwCfmLinkTraceMipMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the middle mac-address of middle nodes in LinkTrace operation.
"
::= { hwEthernetOAMTrapsVbOids 1 }
hwEFMEventType OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the type of EFM event.
"
::= { hwEthernetOAMTrapsVbOids 2 }
hwEFMEventLocation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the location of EFM event.
"
::= { hwEthernetOAMTrapsVbOids 3 }
hwCfmMepLbResultLbmOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of LBMs sent by the MEP per one loopback.
"
::= { hwEthernetOAMTrapsVbOids 4 }
hwCfmMepLbResultLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of correct LBRs received by the MEP per one loopback.
"
::= { hwEthernetOAMTrapsVbOids 5 }
hwCfmMepLtResultOK OBJECT-TYPE
SYNTAX Integer32(0..1)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the result of LT performed by the MEP.
Options:
1. true(0) -the Linktrace succeed
2. false(1) -the Linktrace fail
Default: true(0)
"
::= { hwEthernetOAMTrapsVbOids 6 }
hwCfmMepLbResultOutOfOrderLbrIn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of out-of-order LBRs received by the MEP per loopback."
::= { hwEthernetOAMTrapsVbOids 7 }
hwCfmMepLbTestResultLbmOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of LBMs sent by the MEP in each LB diagnostic test."
::= { hwEthernetOAMTrapsVbOids 8 }
hwCfmMepLbTestResultLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of correct LBRs received by the MEP in each LB diagnostic test."
::= { hwEthernetOAMTrapsVbOids 9 }
hwCfmMepLbTestResultCRCErrorLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of CRC error LBRs received by the MEP in each LB diagnostic test."
::= { hwEthernetOAMTrapsVbOids 10 }
hwCfmMepLbTestResultBERLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of bit error LBRs received by the MEP in each LB diagnostic test."
::= { hwEthernetOAMTrapsVbOids 11 }
hwCfmMepLbTestResultOutOfOrderLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of out-of-order LBRs received by the MEP in each LB diagnostic test."
::= { hwEthernetOAMTrapsVbOids 12 }
hwCfmCcAlarmType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the CC alarm type of Ethernet OAM.
Options:
1.defRDICCM(1) -indicates the RDI alarm
2.defMACStatus(2) -indicates the interface status alarm
3.defRemoteCCM(3) -indicates the remote CCM loss alarm
4.defErrorCCM(4) -indicates the CCM error alarm
5.defXconCCM(5) -indicates the cross error alarm
"
::= { hwEthernetOAMTrapsVbOids 13 }
hwEthernetOAMTraps OBJECT IDENTIFIER ::= { hwEthernetOAM 4 }
hwEthernetOAMCommonTraps OBJECT IDENTIFIER ::= { hwEthernetOAMTraps 1 }
hwEthernetOAMCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwEthernetOAMCommonTraps 0 }
hwEthernetOAMLBCheckTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwCfmMepTransmitLbmDestMacAddress,
hwCfmMepLbResultLbrIn,
hwCfmMepLbResultLbmOut,
hwCfmMepLbResultOutOfOrderLbrIn
}
STATUS current
DESCRIPTION
"The trap is generated when LoopBack operation happens.
The hwCfmLoopbackNumIn indicates the number of LBR receives,defined in hwEthernetOAMTrapsVbOids.
"
::= { hwEthernetOAMCommonTraps 0 1 }
hwEthernetOAMLTStepCheckTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwCfmMepTransmitLtmTargetMacAddress,
hwCfmMepTransmitLtmTtl,
hwCfmLinkTraceMipMacAddress
}
STATUS current
DESCRIPTION
"The trap is generated when LinkTrace operation happens at middle nodes.
The hwCfmLinkTraceMipMacAddress indicates the mac-address of middle nodes in LinkTrace operation,
defined in hwEthernetOAMTrapsVbOids.
Indicates the result of LinkTrace operation
"
::= { hwEthernetOAMCommonTraps 0 2 }
hwEthernetOAMLTCheckTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwCfmMepTransmitLtmTargetMacAddress,
hwCfmMepTransmitLtmTtl,
hwCfmLinkTraceMipMacAddress,
hwCfmMepLtResultOK
}
STATUS current
DESCRIPTION
"The trap is generated when LinkTrace operation Finish.
The hwCfmLinkTraceMipMacAddress indicates the mac-address of middle nodes in LinkTrace operation,
defined in hwEthernetOAMTrapsVbOids.
The hwCfmLinkTraceResult indicates the result of LinkTrace operation,
defined in hwEthernetOAMTrapsVbOids.
"
::= { hwEthernetOAMCommonTraps 0 3 }
hwEthernetOAMLBTestCheckTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwCfmMepTransmitLbTestDestMacAddress,
hwCfmMepLbTestResultLbrIn,
hwCfmMepLbTestResultLbmOut,
hwCfmMepLbTestResultCRCErrorLbrIn,
hwCfmMepLbTestResultBERLbrIn,
hwCfmMepLbTestResultOutOfOrderLbrIn
}
STATUS current
DESCRIPTION
"The trap is sent when the LB diagnostic test is ended."
::= { hwEthernetOAMCommonTraps 0 6 }
hwEthernetOAMAlarmTraps OBJECT IDENTIFIER ::= { hwEthernetOAMTraps 2 }
hwCFMAlarmTraps OBJECT IDENTIFIER ::= { hwEthernetOAMAlarmTraps 1 }
hwCFMAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwCFMAlarmTraps 0 }
hwCFMRmepDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM lose occurs.
"
::= { hwCFMAlarmTraps 0 1 }
hwCFMErrorCcmDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM error occurs.
"
::= { hwCFMAlarmTraps 0 2 }
hwCFMXconCcmDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM Xcon error occurs.
"
::= { hwCFMAlarmTraps 0 3 }
hwCFMRDIDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM RDI error occurs.
"
::= { hwCFMAlarmTraps 0 4 }
hwCFMRmepDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM RDI loss occurs.
"
::= { hwCFMAlarmTraps 0 5}
hwCFMErrorCcmDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM error recovers.
"
::= { hwCFMAlarmTraps 0 6}
hwCFMXconCcmDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM Xcon error recovers.
"
::= { hwCFMAlarmTraps 0 7}
hwCFMRDIDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM RDI error recovers.
"
::= { hwCFMAlarmTraps 0 8}
hwCFMMacStatusDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when at least one remote MEP's interface is not up.
"
::= { hwCFMAlarmTraps 0 9}
hwCFMMacStatusDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when all remote MEPs' interfaces become up.
"
::= { hwCFMAlarmTraps 0 10}
hwCFMIfTriggerDownTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when port is deactivated due to the faulty ETHOAM link.
"
::= { hwCFMAlarmTraps 0 11}
hwCFMIfTriggerDownRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when port is activated because the ETHOAM link fault is rectified.
"
::= { hwCFMAlarmTraps 0 12}
hwCFMSystemAlarmTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The SNMP trap that is generated when the system generates a number of Ethernet OAM connectivity check alarms.
"
::= { hwCFMAlarmTraps 0 13}
hwCFMSystemAlarmRecoveryTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The SNMP trap that is generated when a number of Ethernet OAM connectivity check alarms are cleared.
"
::= { hwCFMAlarmTraps 0 14}
hwCfmFaultAlarmTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwCfmCcAlarmType,
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwCfmMepOntid,
hwCfmMepGemIndex,
hwCfmMepGemportid,
hwCfmMepPrimaryVid,
hwCfmMepVlantag1,
hwCfmMepVlantag2
}
STATUS current
DESCRIPTION
"This trap is generated when Ethernet OAM detects a continuity check fault.
"
::= { hwCFMAlarmTraps 0 15 }
hwCfmFaultAlarmRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwCfmCcAlarmType,
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwCfmMepOntid,
hwCfmMepGemIndex,
hwCfmMepGemportid,
hwCfmMepPrimaryVid,
hwCfmMepVlantag1,
hwCfmMepVlantag2
}
STATUS current
DESCRIPTION
"This trap is generated when the continuity check fault detected by Ethernet OAM is cleared.
"
::= { hwCFMAlarmTraps 0 16}
hwOntEthernetOAMAlarmTraps OBJECT IDENTIFIER ::= { hwEthernetOAMTraps 3 }
hwOntCFMAlarmTraps OBJECT IDENTIFIER ::= { hwOntEthernetOAMAlarmTraps 1 }
hwOntCFMAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwOntCFMAlarmTraps 0 }
hwOntCFMRmepDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM lose occurs.
"
::= { hwOntCFMAlarmTraps 0 1 }
hwOntCFMErrorCcmDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM error occurs.
"
::= { hwOntCFMAlarmTraps 0 2 }
hwOntCFMXconCcmDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM Xcon error occurs.
"
::= { hwOntCFMAlarmTraps 0 3 }
hwOntCFMRDIDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM RDI error occurs.
"
::= { hwOntCFMAlarmTraps 0 4 }
hwOntCFMRmepDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM RDI loss occurs.
"
::= { hwOntCFMAlarmTraps 0 5}
hwOntCFMErrorCcmDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM error recovers.
"
::= { hwOntCFMAlarmTraps 0 6}
hwOntCFMXconCcmDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM Xcon error recovers.
"
::= { hwOntCFMAlarmTraps 0 7}
hwOntCFMRDIDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when CCM RDI error recovers.
"
::= { hwOntCFMAlarmTraps 0 8}
hwOntCFMMacStatusDefectTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when at least one remote MEP's interface is not up.
"
::= { hwOntCFMAlarmTraps 0 9}
hwOntCFMMacStatusDefectRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when all remote MEPs' interfaces become up.
"
::= { hwOntCFMAlarmTraps 0 10}
hwOntCFMIfTriggerDownTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwXponOntIndex
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when port is deactivated due to the faulty ETHOAM link.
"
::= { hwOntCFMAlarmTraps 0 11}
hwOntCFMIfTriggerDownRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwXponOntIndex
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when port is activated because the ETHOAM link fault is rectified.
"
::= { hwOntCFMAlarmTraps 0 12}
hwOntCFMSystemAlarmTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The SNMP trap that is generated when the system generates a number of Ethernet OAM connectivity check alarms.
"
::= { hwOntCFMAlarmTraps 0 13}
hwOntCFMSystemAlarmRecoveryTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The SNMP trap that is generated when a number of Ethernet OAM connectivity check alarms are cleared.
"
::= { hwOntCFMAlarmTraps 0 14}
hwOntCfmFaultAlarmTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwOntCfmCcAlarmType,
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOntCfmMepOntid,
hwOntCfmMepEthPortId,
hwOntCfmMepVlanid
}
STATUS current
DESCRIPTION
" The SNMP trap that is generated when Ethernet OAM detects a continuity check fault.
"
::= { hwOntCFMAlarmTraps 0 15}
hwOntCfmFaultAlarmRecoveryTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwOntCfmCcAlarmType,
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOntCfmMepOntid,
hwOntCfmMepEthPortId,
hwOntCfmMepVlanid
}
STATUS current
DESCRIPTION
" The SNMP trap that is generated when the continuity check fault detected by Ethernet OAM is cleared.
"
::= { hwOntCFMAlarmTraps 0 16}
hwOntEthernetOAMTrapsVbOids OBJECT IDENTIFIER ::= { hwOntCFMAlarmTraps 1 }
hwOntCfmMepLbResultLbmOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the middle mac-address of middle nodes in LinkTrace operation.
"
::= { hwOntEthernetOAMTrapsVbOids 1 }
hwOntCfmMepLbResultLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of correct LBRs received by the MEP per one loopback..
"
::= { hwOntEthernetOAMTrapsVbOids 2 }
hwOntCfmMepLbResultOutOfOrderLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of out-of-order LBRs received by the MEP per loopback."
::= { hwOntEthernetOAMTrapsVbOids 3 }
hwOntCfmLinkTraceMipMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the middle mac-address of middle nodes in LinkTrace operation.
"
::= { hwOntEthernetOAMTrapsVbOids 4 }
hwOntCfmMepLtResultOK OBJECT-TYPE
SYNTAX Integer32(0..1)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the result of LT performed by the MEP.
Options:
1. true(0) -the Linktrace succeed
2. false(1) -the Linktrace fail
Default: true(0)
"
::= { hwOntEthernetOAMTrapsVbOids 5 }
hwOntEthernetOAMCommonTraps OBJECT IDENTIFIER ::= { hwEthernetOAMTraps 4 }
hwOntEthernetOAMCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwOntEthernetOAMCommonTraps 0 }
hwOntEthernetOAMLBCheckTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwOntCfmMepTransmitLbmDestMacAddress,
hwOntCfmMepLbResultLbrIn,
hwOntCfmMepLbResultLbmOut,
hwOntCfmMepLbResultOutOfOrderLbrIn
}
STATUS current
DESCRIPTION
"The trap is generated when LoopBack operation happens.
The hwOntCfmLoopbackNumIn indicates the number of LBR receives,defined in hwOntEthernetOAMTrapsVbOids.
"
::= { hwOntEthernetOAMCommonTraps 0 1 }
hwOntEthernetOAMLTCheckTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwOntCfmMepTransmitLtmTargetMacAddress,
hwOntCfmMepTransmitLtmTtl,
hwOntCfmLinkTraceMipMacAddress,
hwOntCfmMepLtResultOK
}
STATUS current
DESCRIPTION
"The trap is generated when LinkTrace operation Finish.
The hwOntCfmLinkTraceMipMacAddress indicates the mac-address of middle nodes in LinkTrace operation,
defined in hwOntEthernetOAMTrapsVbOids.
The hwOntCfmMepLtResultOK indicates the result of LinkTrace operation,
defined in hwOntEthernetOAMTrapsVbOids.
"
::= { hwOntEthernetOAMCommonTraps 0 2 }
hwOntEthernetOAMLTStepCheckTrap NOTIFICATION-TYPE
OBJECTS
{
dot1agCfmMdIndex,
dot1agCfmMaIndex,
hwCfmMepIdentifier,
hwOntCfmMepTransmitLtmTargetMacAddress,
hwOntCfmMepTransmitLtmTtl,
hwOntCfmLinkTraceMipMacAddress
}
STATUS current
DESCRIPTION
"The trap is generated when LinkTrace operation happens at middle nodes.
The hwCfmLinkTraceMipMacAddress indicates the mac-address of middle nodes in LinkTrace operation,
defined in hwEthernetOAMTrapsVbOids.
Indicates the result of LinkTrace operation
"
::= { hwOntEthernetOAMCommonTraps 0 3 }
hwEthernetOAMEFMTraps OBJECT IDENTIFIER ::= { hwEthernetOAM 5 }
hwEFMAlarmTraps OBJECT IDENTIFIER ::= { hwEthernetOAMEFMTraps 1 }
hwEFMAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwEFMAlarmTraps 0 }
hwDot3OAMThresholdEventTrap NOTIFICATION-TYPE
OBJECTS
{
dot3OamEventLogIndex,
ifIndex,
dot3OamEventLogTimestamp,
dot3OamEventLogOui,
dot3OamEventLogType,
dot3OamEventLogLocation,
dot3OamEventLogWindowHi,
dot3OamEventLogWindowLo,
dot3OamEventLogThresholdHi,
dot3OamEventLogThresholdLo,
dot3OamEventLogValue,
dot3OamEventLogRunningTotal,
dot3OamEventLogEventTotal
}
STATUS current
DESCRIPTION
"A hwdot3OAMThresholdEventTrap notification is sent when a local or
remote threshold crossing event is detected. A local
threshold crossing event is detected by the local entity,
while a remote threshold crossing event is detected by the
reception of an Ethernet OAM Event Notification OAMPDU
indicating a threshold event.
This notification should not be sent more than once per
second.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance of in the
dot3OamEventLogTable.
The management entity should periodically check
dot3OamEventLogTable to detect any missed events."
::= { hwEFMAlarmTraps 0 1 }
hwDot3OAMNonThresholdEventTrap NOTIFICATION-TYPE
OBJECTS {
dot3OamEventLogIndex,
ifIndex,
dot3OamEventLogTimestamp,
dot3OamEventLogOui,
dot3OamEventLogType,
dot3OamEventLogLocation,
dot3OamEventLogEventTotal
}
STATUS current
DESCRIPTION
"A hwdot3OAMNonThresholdEventTrap notification is sent when a local
or remote non-threshold crossing event is detected. A local
event is detected by the local entity, while a remote event is
detected by the reception of an Ethernet OAM Event
Notification OAMPDU indicating a non-threshold crossing event.
This notification should not be sent more than once per
second.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance of the
dot3OamEventLogTable.
The management entity should periodically check
dot3OamEventLogTable to detect any missed events."
::= { hwEFMAlarmTraps 0 2 }
hwEFMLinkEventTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwEFMEventType,
hwEFMEventLocation
}
STATUS current
DESCRIPTION
"The SNMP trap that is generated when Ethernet OAM event defined in 802.3ah.
The hwEFMEventType indicates the event type of EFM,defined in hwEthernetOAMEFMTraps.
The hwEFMEventLocation indicates the location of EFM event,defined in hwEthernetOAMEFMTraps.
"
::= { hwEFMAlarmTraps 0 3}
-- ******************************************************************
-- The Maintenance Domain Table for ONT
-- ******************************************************************
hwOntCfmMdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOntCfmMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures an MD for ONT, including creating and deleting an MD.
The index of this table is hwOntCfmMdIndex.
"
REFERENCE
"802.1ag clauses 3.22 and 18.1"
::= { hwEthernetOAMMibObject 20 }
hwOntCfmMdEntry OBJECT-TYPE
SYNTAX HwOntCfmMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures an MD for ONT, including creating and deleting an MD.
The index of this entry is hwOntCfmMdIndex.
"
INDEX {hwOntCfmMdIndex }
::= { hwOntCfmMdTable 1 }
HwOntCfmMdEntry ::=
SEQUENCE
{
hwOntCfmMdIndex
Integer32,
hwOntCfmMdFormat
Dot1agCfmMaintDomainNameType,
hwOntCfmMdName
Dot1agCfmMaintDomainName,
hwOntCfmMdLevel
Dot1agCfmMDLevel,
hwOntCfmMdMhfCreation
Dot1agCfmMhfCreation,
hwOntCfmMdMhfIdPermission
Dot1agCfmIdPermission,
hwOntCfmMdRowStatus
RowStatus
}
hwOntCfmMdIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the Maintenance Domain table.
Referential integrity is required, i.e., the index needs to be
persistent upon a reboot or restart of a device. The index
can never be reused for other Maintenance Domain. This is to
facilitate access control based on OID.
-1: indicates that the MD index is assigned by the device.
"
::= { hwOntCfmMdEntry 1 }
hwOntCfmMdFormat OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainNameType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type (and thereby format) of the Maintenance Domain Name."
REFERENCE
"802.1ag clause 21.6.5.1"
::= { hwOntCfmMdEntry 2 }
hwOntCfmMdName OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Maintenance Domain name. The type/format of this object
is determined by the value of the dot1agCfmMdNameType object.
Each Maintenance Domain has unique name amongst all those
used or available to a service provider or operator. It
facilitates easy identification of administrative
responsibility for each Maintenance Domain.
Clause 3.24 defines a Maintenance Domain name as the
identifier, unique over the domain for which CFM is to
protect against accidental concatenation of Service
Instances, of a particular Maintenance Domain.
"
REFERENCE
"802.1ag clauses 3.24, 12.14.5, and 21.6.5.3"
::= { hwOntCfmMdEntry 3 }
hwOntCfmMdLevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Maintenance Domain Level."
REFERENCE
"802.1ag clause 12.14.5.1.3:b"
::= { hwOntCfmMdEntry 4 }
hwOntCfmMdMhfCreation OBJECT-TYPE
SYNTAX Dot1agCfmMhfCreation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enumerated value indicating whether the management entity can
create MHFs (MIP Half Function) for this Maintenance Domain.
Since, in this variable, there is no encompassing Maintenance
Domain, the value defMHFdefer is not allowed.
"
REFERENCE
"802.1ag clause 12.14.5.1.3:c"
DEFVAL { defMHFnone }
::= { hwOntCfmMdEntry 5 }
hwOntCfmMdMhfIdPermission OBJECT-TYPE
SYNTAX Dot1agCfmIdPermission
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this Maintenance Domain. Since, in this
variable, there is no encompassing Maintenance Domain, the
value sendIdDefer is not allowed.
"
REFERENCE
"802.1ag clause 12.14.5.1.3:d"
DEFVAL { sendIdNone }
::= { hwOntCfmMdEntry 6 }
hwOntCfmMdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { hwOntCfmMdEntry 7 }
-- ******************************************************************
-- The Maintenance Association (MA) Network Table for ONT
-- ******************************************************************
hwOntCfmMaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOntCfmMaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures an MA for ONT, including creating an MA, modifying an MA, deleting an MA, and
configuring the interval for an MA to send CCMs.
The indexes of this table are hwOntCfmMdIndex and hwOntCfmMaIndex.
"
REFERENCE
"802.1ag clause 18.2"
::= { hwEthernetOAMMibObject 21 }
hwOntCfmMaEntry OBJECT-TYPE
SYNTAX HwOntCfmMaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures an MA for ONT, including creating an MA, modifying an MA, deleting an MA, and
configuring the interval for an MA to send CCMs.
The indexes of this entry are hwOntCfmMdIndex and hwOntCfmMaIndex."
INDEX {hwOntCfmMdIndex, hwOntCfmMaIndex }
::= { hwOntCfmMaTable 1 }
HwOntCfmMaEntry ::=
SEQUENCE
{
hwOntCfmMaIndex
Integer32,
hwOntCfmMaNetFormat
INTEGER,
hwOntCfmMaNetName
Dot1agCfmMaintAssocName,
hwOntCfmMaNetCcmInterval
Dot1agCfmCcmInterval,
hwOntCfmMaCompMhfCreation
Dot1agCfmMhfCreation,
hwOntCfmMaCompIdPermission
Dot1agCfmIdPermission,
hwOntCfmMaNetRowStatus
RowStatus,
hwOntCfmMaRemoteDetectStatus
TruthValue,
hwOntCfmMaClientLevel
Integer32,
hwOntCfmMaAISInterval
INTEGER
}
hwOntCfmMaIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MA index, indicating an operated MA.
-1: indicates that the MA index is assigned by the device.
"
::= { hwOntCfmMaEntry 1 }
hwOntCfmMaNetFormat OBJECT-TYPE
SYNTAX INTEGER
{
primaryVid(1),
charString(2),
unsignedInt16(3),
rfc2865VpnId(4),
iccBased(32)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name type of an MA name.
Options:
1. primaryVid(1) -indicates the name type of the MA name is primary VLAN ID
2. charString(2) -indicates the name type of the MA name is char string
3. unsignedInt16(3) -indicates the name type of the MA name is unsigned int16
4. rfc2865VpnId(4) -indicates the name type of the MA name is rfc2865VpnId
5. iccBased(32) -indicates the name type of the MA name is ICC-based
"
REFERENCE
"802.1ag clauses 21.6.5.4"
::= { hwOntCfmMaEntry 2 }
hwOntCfmMaNetName OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name of an MA.
Range: 1-45 characters.
"
REFERENCE
"802.1ag clauses 21.6.5.6, and Table 21-20"
::= { hwOntCfmMaEntry 3 }
hwOntCfmMaNetCcmInterval OBJECT-TYPE
SYNTAX Dot1agCfmCcmInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the Tx interval of CCMs.
Options:
1. intervalInvalid(0) -indicates the Tx interval of CCMs is invalid
2. interval300Hz(1) -indicates the Tx interval of CCMs is 300Hz
3. interval10ms(2) -indicates the Tx interval of CCMs is 10ms
4. interval100ms(3) -indicates the Tx interval of CCMs is 100ms
5. interval1s(4) -indicates the Tx interval of CCMs is 1s
6. interval10s(5) -indicates the Tx interval of CCMs is 10s
7. interval1min(6) -indicates the Tx interval of CCMs is 1 minute
8. interval10min(7) -indicates the Tx interval of CCMs is 10 minutes
Default: interval1min(6)
"
REFERENCE
"802.1ag clause 12.14.6.1.3:e"
DEFVAL { interval1min }
::= { hwOntCfmMaEntry 4 }
hwOntCfmMaCompMhfCreation OBJECT-TYPE
SYNTAX Dot1agCfmMhfCreation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if the Management entity can create MHFs (MIP Half
Function) for this MA.
"
REFERENCE
"802.1ag clause 12.14.6.1.3:c"
DEFVAL { defMHFnone }
::= { hwOntCfmMaEntry 5 }
hwOntCfmMaCompIdPermission OBJECT-TYPE
SYNTAX Dot1agCfmIdPermission
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this MA.
"
REFERENCE
"802.1ag clause 12.14.6.1.3:d"
DEFVAL { sendIdNone }
::= { hwOntCfmMaEntry 6 }
hwOntCfmMaNetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { hwOntCfmMaEntry 7 }
hwOntCfmMaRemoteDetectStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CFM remote detect switch of the MA.
Options:
1. true(1) -indicates the CFM remote detect switch of the MA is enabled
2. false(2) -indicates the CFM remote detect switch of the MA is disabled
Default: true(1)
"
DEFVAL { true }
::= { hwOntCfmMaEntry 8 }
hwOntCfmMaClientLevel OBJECT-TYPE
SYNTAX Integer32(0..7 | 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the client level at which an AIS packet is sent by an MEP.
Default: 255
255 is used to delete client level of MA.
"
REFERENCE
"Y.1731-7.4.1"
::= { hwOntCfmMaEntry 9 }
hwOntCfmMaAISInterval OBJECT-TYPE
SYNTAX INTEGER
{
interval1s(1),
interval1m(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interval at which an AIS packet is sent by an MEP.
Options:
1. interval1s(1) -The AIS packet is sent per second
2. interval1m(2) -The AIS packet is sent per minute
Default:interval1s(1)
"
REFERENCE
"Y.1731-7.4.1"
::= { hwOntCfmMaEntry 10 }
-- ******************************************************************
-- The Maintenance Association End Point Table for ONT
-- ******************************************************************
hwOntCfmMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOntCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sets a MEP for ONT, including creating a MEP, deleting a MEP, and disabling the joint switchover switch of a MEP.
The indexes of this table are hwOntCfmMdIndex, hwOntCfmMaIndex and hwOntCfmMepId.
"
REFERENCE
"802.1ag clauses 12.14.7 and 19.2"
::= { hwEthernetOAMMibObject 22 }
hwOntCfmMepEntry OBJECT-TYPE
SYNTAX HwOntCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sets a MEP for ONT, including creating a MEP, deleting a MEP, and disabling the joint switchover switch of a MEP.
The indexes of this entry are hwOntCfmMdIndex, hwOntCfmMaIndex and hwOntCfmMepId.
"
INDEX
{
hwOntCfmMdIndex,
hwOntCfmMaIndex,
hwOntCfmMepId
}
::= { hwOntCfmMepTable 1 }
HwOntCfmMepEntry ::=
SEQUENCE
{
hwOntCfmMepId
Integer32,
hwOntCfmMepIfIndex
Integer32,
hwOntCfmMepOntid
Integer32,
hwOntCfmMepIsIphost
TruthValue,
hwOntCfmMepEthPortId
Integer32,
hwOntCfmMepDirection
Dot1agCfmMpDirection,
hwOntCfmMepVlanid
Unsigned32,
hwOntCfmMepActive
TruthValue,
hwOntCfmMepCciEnabled
TruthValue,
hwOntCfmMepCcmLtmPriority
Unsigned32,
hwOntCfmMepCcmRemoteMepid
Integer32,
hwOntCfmMepMacAddress
MacAddress,
hwOntCfmMepRowStatus
RowStatus,
hwOntCfmMepRunStatus
TruthValue,
hwOntCfmMepHighestPrDefect
Integer32,
hwOntCfmMepDefects
BITS,
hwOntCfmMepLowPrDef
Integer32,
hwOntCfmMepIfTriggerType
INTEGER,
hwOntCfmMepTriggerPriority
Integer32,
hwOntCfmMepFngAlarmTime
Integer32,
hwOntCfmMepFngResetTime
Integer32,
hwOntCfmMepAISStatus
INTEGER,
hwOntCfmMepRdiLowestAlarmPri
Integer32,
hwOntCfmMepIgnoreTLV
BITS,
hwOntCfmMepTransmitLbmDestMepId
Integer32,
hwOntCfmMepTransmitLbmDestMacAddress
MacAddress,
hwOntCfmMepTransmitLbmDestIsMepId
INTEGER,
hwOntCfmMepTransmitLbmDataLength
Integer32,
hwOntCfmMepTransmitLbmPriority
Integer32,
hwOntCfmMepTransmitLbmMessages
Integer32,
hwOntCfmMepTransmitLbmInterval
Integer32,
hwOntCfmMepTransmitLbmTerminate
INTEGER,
hwOntCfmMepLbrIn
Counter32,
hwOntCfmMepLbrInOutOfOrder
Counter32,
hwOntCfmMepTransmitLtmTargetIsMepId
INTEGER,
hwOntCfmMepTransmitLtmTargetMacAddress
MacAddress,
hwOntCfmMepTransmitLtmTargetMepId
Integer32,
hwOntCfmMepTransmitLtmTtl
Unsigned32
}
hwOntCfmMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the MEP index.
Range: 1-8191
"
REFERENCE
"802.1ag clauses 3.19, 19.2 and 12.14.7"
::= { hwOntCfmMepEntry 1 }
hwOntCfmMepIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the flag of port bound to the MEP, and the value is obtained through
the ifIndex algorithm according to the shelf ID, slot ID, and port ID.
-1 indicates an invalid value for ifIndex.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:b"
::= { hwOntCfmMepEntry 2 }
hwOntCfmMepOntid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the ONT ID of the XPON port.
"
::= { hwOntCfmMepEntry 3 }
hwOntCfmMepIsIphost OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the port type of the MEP.
Options:
1. true(1) -indicates the IPHOST port
2. false(2) -indicates the ETH port
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:e and 20.9.1"
::= { hwOntCfmMepEntry 4 }
hwOntCfmMepEthPortId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the ETH port ID of the MEP.
-1 indicates an invalid value for ETH port ID.
"
::= { hwOntCfmMepEntry 5 }
hwOntCfmMepDirection OBJECT-TYPE
SYNTAX Dot1agCfmMpDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the MEP direction.
Options:
1. down(1) -indicates the MEP direction is down
2. up(2) -indicates the MEP direction is up
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:c and 19.2.
The value can be one of the following:
down(1) -Down direction.
up(2) -Up direction.
"
::= { hwOntCfmMepEntry 6 }
hwOntCfmMepVlanid OBJECT-TYPE
SYNTAX Unsigned32(1..4094|65534|65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the VLAN ID of the MEP.
65534 indicates that the MEP is not associated with any VLAN.
65535 indicates that the MEP is unaware of VLAN.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:d"
::= { hwOntCfmMepEntry 7 }
hwOntCfmMepActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the enable status of the MEP.
Options:
1. true(1) -indicates the MEP is enabled
2. false(2) -indicates the MEP is disabled
Default: true(1)
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:e and 20.9.1"
DEFVAL { true }
::= { hwOntCfmMepEntry 8 }
hwOntCfmMepCciEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the CC message sending function status of the MEP.
Options:
1. true(1) -indicates the CC message sending function of the MEP is enabled
2. false(2) -indicates the CC message sending function of the MEP is disabled
Default: true(1)
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:g and 20.10.1"
DEFVAL { true }
::= { hwOntCfmMepEntry 9 }
hwOntCfmMepCcmLtmPriority OBJECT-TYPE
SYNTAX Unsigned32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the level of CCMs/LTMs sent by the MEP.
Range: 0-7
Default: 7
"
REFERENCE
"802.1ag clause 12.14.7.1.3:h"
DEFVAL { 7 }
::= { hwOntCfmMepEntry 10 }
hwOntCfmMepCcmRemoteMepid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the Remote MEP index of the MEP.
Range: 1-8191
"
::= { hwOntCfmMepEntry 11 }
hwOntCfmMepMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the MAC address of the MEP.
"
REFERENCE
"802.1ag clause J.6 MP addressing"
::= { hwOntCfmMepEntry 12 }
hwOntCfmMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status of the MEP.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operation
In the query, active(1) is returned. To create an MEP, set the row status to
createAndGo(4). To delete an MEP, set the row status to destroy(6).
"
::= { hwOntCfmMepEntry 13 }
hwOntCfmMepRunStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the run status of the MEP.
1. true(1) -indicates the MEP run status is up
2. false(2) -indicates the MEP run status is down
"
REFERENCE
""
::= { hwOntCfmMepEntry 14 }
hwOntCfmMepHighestPrDefect OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the highest defect priority of the MEP.
Options:
1.none(0) -indicates no defects
2.defRDICCM(1) -indicates the RDI defect
3.defMACstatus(2) -indicates the port status defect
4.defRemoteCCM(3) -indicates the remote CCM loss defect
5.defUnexpectedMepId(1025) -indicates the unexpected mep id defect
6.defUnexpectedPeriod(1026) -indicates the unexpected period defect
7.defUnexpectedLevel(1028) -indicates the unexpected level defect
8.defUnexpectedMaId(1029) -indicates the unexpected ma id defect
9.defErrorCCM(4)-indicates the unexpected mep id or unexpected period defect
10.defXconCCM(5)-indicates the unexpected level or unexpected ma id defect
"
REFERENCE
"802.1ag clause 12.14.7.1.3:n 20.33.9 and Table 21-1"
::= { hwOntCfmMepEntry 15 }
hwOntCfmMepDefects OBJECT-TYPE
SYNTAX BITS
{
bDefRDICCM(0),
bDefMACStatus(1),
bDefRemoteCCM(2),
bDefErrorCCM(3),
bDefXconCCM(4),
reserved5(5),
reserved6(6),
reserved7(7),
reserved8(8),
reserved9(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
reserved14(14),
reserved15(15),
reserved16(16),
reserved17(17),
reserved18(18),
reserved19(19),
reserved20(20),
reserved21(21),
reserved22(22),
reserved23(23),
reserved24(24),
reserved25(25),
reserved26(26),
bDefLock(27),
bDefUnexpectedMepId(28),
bDefUnexpectedPeriod(29),
bDefUnexpectedLevel(30),
bDefUnexpectedMaId(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the defect status of the MEP.
Options:
1. bDefRDICCM(0) -indicates the RDI defect
2. bDefMACStatus(1) -indicates the port status defect
3. bDefRemoteCCM(2) -indicates the remote CCM loss defect
4. bDefErrorCCM(3) -indicates the CCM error defect
5. bDefXconCCM(4) -indicates the cross error defect
6. bDefLock(27) -indicates the lock defect
7. bDefUnexpectedMepId(28) -indicates the unexpected mep id defect
8. bDefUnexpectedPeriod(29) -indicates the unexpected period defect
9. bDefUnexpectedLevel(30) -indicates the unexpected level defect
10.bDefUnexpectedMaId (31) -indicates the unexpected ma id defect
"
REFERENCE
".1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q,
12.14.7.1.3:r, 12.14.7.1.3:s, 20.21.3, 20.23.3, 20.33.5,
20.33.6, 20.33.7."
::= { hwOntCfmMepEntry 16 }
hwOntCfmMepLowPrDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the lowest defect priority of the MEP.
Range: 1-6
Default: 2
"
REFERENCE
"802.1ag clause 12.14.7.1.3:k and 20.9.5 and Table 20-1"
DEFVAL { macRemErrXcon }
::= { hwOntCfmMepEntry 17}
hwOntCfmMepIfTriggerType OBJECT-TYPE
SYNTAX INTEGER
{
down(1),
disable(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the trigger function type of the MEP port.
Options:
1. down(1) -indicates that the port will be deactivated when trigger-if-down is enabled
2. disable(255) -indicates trigger function is disabled
Default: disable(255)
"
::= { hwOntCfmMepEntry 18}
hwOntCfmMepTriggerPriority OBJECT-TYPE
SYNTAX Integer32(-1 | 1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the lowest alarm priority to enable trigger-if-down.
Range: -1,1-5
Default: 2
-1 indicates an invalid value for trigger-if-down priority.
"
DEFVAL { macRemErrXcon }
::= { hwOntCfmMepEntry 19 }
hwOntCfmMepFngAlarmTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the alarm waiting time of the MEP, in the unit of millisecond.
Range: 2500-10000
Unit: millisecond
Default: 2500
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:l and 20.33.3"
::= { hwOntCfmMepEntry 20 }
hwOntCfmMepFngResetTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the recovery alarm waiting time of the MEP, in the unit of millisecond.
Range: 2500-10000
Unit: millisecond
Default: 10000
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:m and 20.33.4 "
::= { hwOntCfmMepEntry 21 }
hwOntCfmMepAISStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the AIS packet sending function is enabled.
Options:
1. enable(1) -Indicates that the AIS packet sending function is enabled
2. disable(2) -Indicates that the AIS packet sending function is disabled
Default: disable(2)
"
::= { hwOntCfmMepEntry 22 }
hwOntCfmMepRdiLowestAlarmPri OBJECT-TYPE
SYNTAX Integer32(2..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the lowest alarm priority of generating the RDI.
Range: 2-6
Default: 2
"
DEFVAL { macRemErrXcon }
::= { hwOntCfmMepEntry 23 }
hwOntCfmMepIgnoreTLV OBJECT-TYPE
SYNTAX BITS
{
bDefInterfaceStatusTLV(0),
bDefreserved1(1),
bDefreserved2(2),
bDefreserved3(3),
bDefreserved4(4),
bDefreserved5(5),
bDefreserved6(6),
bDefreserved7(7),
bDefreserved8(8),
bDefreserved9(9),
bDefreserved10(10),
bDefreserved11(11),
bDefreserved12(12),
bDefreserved13(13),
bDefreserved14(14),
bDefreserved15(15),
bDefreserved16(16),
bDefreserved17(17),
bDefreserved18(18),
bDefreserved19(19),
bDefreserved20(20),
bDefreserved21(21),
bDefreserved22(22),
bDefreserved23(23),
bDefreserved24(24),
bDefreserved25(25),
bDefreserved26(26),
bDefreserved27(27),
bDefreserved28(28),
bDefreserved29(29),
bDefreserved30(30),
bDefreserved31(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the TLV that MEP ignores when receiving CCM packets.
Options:
1.bDefInterfaceStatusTLV(0) -indicates the Interface Status TLV
Other bits are reserved. For each bit, 1 indicates that the TLV is ignored,
and 0 indicates that the TLV is not ignored.
Default: 0
"
::= { hwOntCfmMepEntry 24 }
hwOntCfmMepTransmitLbmDestMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the ID of the destination MEP that performs LB.
"
::= { hwOntCfmMepEntry 25 }
hwOntCfmMepTransmitLbmDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the destination MAC address of LB performed by the MEP.
"
::= { hwOntCfmMepEntry 26 }
hwOntCfmMepTransmitLbmDestIsMepId OBJECT-TYPE
SYNTAX INTEGER
{
invalid (0),
true (1),
false (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether LB is performed by an MEP ID.
Options:
1. invalid(0) -indicates invalide value
2. true(1) -indicates LB is performed by an MEP ID
3. false(2) -indicates LB is not performed by an MEP ID
"
::= {hwOntCfmMepEntry 27 }
hwOntCfmMepTransmitLbmDataLength OBJECT-TYPE
SYNTAX Integer32 (0..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the length (length of tlv value) for datatlv of the LBM sent by a MEP.
Unit: byte
Range: 0-1500
"
::= { hwOntCfmMepEntry 28 }
hwOntCfmMepTransmitLbmPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority of the LBM sent by the MEP in the LB diagnostic test.
Range: 0-7
The default value is the Tx priority of the CCM.
"
::= { hwOntCfmMepEntry 29 }
hwOntCfmMepTransmitLbmMessages OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the number of LBMs sent by the MEP in LB.
"
DEFVAL { 4 }
::= {hwOntCfmMepEntry 30 }
hwOntCfmMepTransmitLbmInterval OBJECT-TYPE
SYNTAX Integer32 (0..60)
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the interval of the LBMs are sent by a MEP.
Unit: second
Range: 0-60
Default: 0
"
DEFVAL { 0 }
::= { hwOntCfmMepEntry 31 }
hwOntCfmMepTransmitLbmTerminate OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
terminate(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Means to stop sending LBMs.
Options:
1. invalid(-1) -indicates invalide value
2. terminate(1) -indicates stop sending LBMs
"
::= { hwOntCfmMepEntry 32 }
hwOntCfmMepLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of correct LBRs received by the MEP.
"
::= { hwOntCfmMepEntry 33 }
hwOntCfmMepLbrInOutOfOrder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of LBRs with incorrect SNs received by the MEP.
"
::= { hwOntCfmMepEntry 34 }
hwOntCfmMepTransmitLtmTargetIsMepId OBJECT-TYPE
SYNTAX INTEGER
{
invalid (0),
true (1),
false (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether LT is performed by an MEP ID.
Options:
1. invalid(0) -indicates invalid value
2. true(1) -indicates LT is performed by an MEP ID
3. false(2) -indicates LT is not performed by an MEP ID
"
::= { hwOntCfmMepEntry 35 }
hwOntCfmMepTransmitLtmTargetMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the MAC address of the LTM sent by the MEP.
"
::= { hwOntCfmMepEntry 36 }
hwOntCfmMepTransmitLtmTargetMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the target MEP ID in the LTM sent by the MEP.
"
::= { hwOntCfmMepEntry 37 }
hwOntCfmMepTransmitLtmTtl OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the TTL in the transmitted TLM for LT that is performed by the MEP.
Range: 0-255
Default: 64
"
DEFVAL { 0 }
::= { hwOntCfmMepEntry 38 }
-- ******************************************************************
-- ONT global para table
-- ******************************************************************
hwOntCfmGlobalParaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOntCfmGlobalParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set the global CFM or PM para of ONT.
The indexes of this table are hwOntCfmIfIndex, hwOntCfmOntid.
"
::= { hwEthernetOAMMibObject 23 }
hwOntCfmGlobalParaEntry OBJECT-TYPE
SYNTAX HwOntCfmGlobalParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set the global CFM or PM para of ONT.
The indexes of this entry are hwOntCfmIfIndex, hwOntCfmOntid.
"
INDEX
{
hwOntCfmIfIndex,
hwOntCfmOntid
}
::= { hwOntCfmGlobalParaTable 1 }
HwOntCfmGlobalParaEntry ::=
SEQUENCE
{
hwOntCfmIfIndex
Integer32,
hwOntCfmOntid
Integer32,
hwOntCfmGlobalStatus
TruthValue,
hwOntRemoteDetectStatus
TruthValue,
hwOntAlarmStatus
TruthValue,
hwOntCfmCcAlarmType
Integer32,
hwOntCfmCcAlarmMode
INTEGER
}
hwOntCfmIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the flag of port bound to the MEP, and the value is obtained through
the ifIndex algorithm according to the shelf ID, slot ID, and port ID.
-1 indicates an invalid value for ifIndex.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:b"
::= { hwOntCfmGlobalParaEntry 1 }
hwOntCfmOntid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ONT ID of the XPON port."
::= { hwOntCfmGlobalParaEntry 2 }
hwOntCfmGlobalStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the CFM switch of the ONT.
Options:
1. true(1) -indicates the CFM switch of the ONT is enabled
2. false(2) -indicates the CFM switch of the ONT is disabled
Default: true(1)
"
DEFVAL { true }
::= { hwOntCfmGlobalParaEntry 3 }
hwOntRemoteDetectStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CFM remote detect switch of the ONT.
Options:
1. true(1) -indicates the CFM remote detect switch of the ONT is enabled
2. false(2) -indicates the CFM remote detect switch of the ONT is disabled
Default: false(2)
"
DEFVAL { false }
::= { hwOntCfmGlobalParaEntry 4 }
hwOntAlarmStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CFM alarm switch of the ONT.
Options:
1. true(1) -indicates the CFM alarm switch of the ONT is enabled
2. false(2) -indicates the CFM alarm switch of the ONT is disabled
Default: true(1)
"
DEFVAL { true }
::= { hwOntCfmGlobalParaEntry 5 }
hwOntCfmCcAlarmType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the CC alarm type of Ethernet OAM.
Options:
1.defRDICCM(1) -indicates the RDI alarm
2.defMACStatus(2) -indicates the interface status alarm
3.defRemoteCCM(3) -indicates the remote CCM loss alarm
4.defErrorCCM(4) -indicates the CCM error alarm
5.defXconCCM(5) -indicates the cross error alarm
"
::= { hwOntCfmGlobalParaEntry 6 }
hwOntCfmCcAlarmMode OBJECT-TYPE
SYNTAX INTEGER
{
summary(1),
detail(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CC alarm mode of Ethernet OAM.
Options:
1. summary(1) -Indicates that the CC alarm mode of Ethernet OAM is summary, and the alarm parameter contains only the indexes of MEP management objects: MD index, MA index, and MEP ID.
2. detail(2) -Indicates that the CC alarm mode of Ethernet OAM is detail, and the alarm parameter contains MD index, MA index, MEP ID, alarm type, frame ID, slot ID, port ID, ONT ID, ONT Port-ID, Vlantag.
Default: summary(1)
"
::= { hwOntCfmGlobalParaEntry 7 }
-- ******************************************************************
-- ONT PM intsance table
-- ******************************************************************
hwOntY1731TestIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOntY1731TestIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the information for PM instance on ONT.
The index of this table is hwOntY1731TestId.
"
::= { hwEthernetOAMMibObject 24 }
hwOntY1731TestIdEntry OBJECT-TYPE
SYNTAX HwOntY1731TestIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the information for PM instance on ONT.
The index of this entry is hwOntY1731TestId.
"
INDEX { hwOntY1731TestId }
::= { hwOntY1731TestIdTable 1 }
HwOntY1731TestIdEntry ::=
SEQUENCE {
hwOntY1731TestId
Unsigned32,
hwOntY1731LocalMdIndex
Integer32,
hwOntY1731LocalMaIndex
Integer32,
hwOntY1731LocalMepId
Integer32,
hwOntY1731BackwardMacAddress
MacAddress,
hwOntY1731IsUpdateBackwardMacAddress
TruthValue,
hwOntY1731TX8021p
Integer32,
hwOntY1731RCV8021p
Integer32,
hwOntY1731TestIdRowStatus
RowStatus,
hwOntY1731RemoteMepMacAddress
MacAddress,
hwOntY1731TaskType
BITS,
hwOntY1731TaskIfActive
BITS,
hwOntY1731TaskIsContinue
BITS
}
hwOntY1731TestId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967293)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the PM instance ID on ONT.
Range: 1-4294967293
"
::= { hwOntY1731TestIdEntry 1 }
hwOntY1731LocalMdIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the local MD index.
Range: 1-8
"
::= { hwOntY1731TestIdEntry 2 }
hwOntY1731LocalMaIndex OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the local MA index.
Range: 1-4096
"
::= { hwOntY1731TestIdEntry 3 }
hwOntY1731LocalMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the local MEP ID.
Range: 1-8191
"
::= { hwOntY1731TestIdEntry 4 }
hwOntY1731BackwardMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the backward MAC address of the MEP.
"
::= { hwOntY1731TestIdEntry 5 }
hwOntY1731IsUpdateBackwardMacAddress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the onward MAC learning mode.
Options:
1. true(1) -indicates the onward MAC learning mode is update
2. false(2) -indicates the onward MAC learning mode is not update
"
::= { hwOntY1731TestIdEntry 6 }
hwOntY1731TX8021p OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the send 802.1p value.
Range: -1-7
-1: indicates the send priority of the packets is not considered.
"
::= { hwOntY1731TestIdEntry 7 }
hwOntY1731RCV8021p OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the receive 802.1p value.
Range: -1-7
-1: indicates the receive priority of the packets is not considered.
"
::= { hwOntY1731TestIdEntry 8 }
hwOntY1731TestIdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status of the PM instance.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operation
In the query, active(1) is returned. To create an PM instance, set the row status to
createAndGo(4). To delete an PM instance, set the row status to destroy(6).
"
::= { hwOntY1731TestIdEntry 9 }
hwOntY1731RemoteMepMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the MAC address of the remote MEP.
"
::= { hwOntY1731TestIdEntry 10 }
hwOntY1731TaskType OBJECT-TYPE
SYNTAX BITS
{
bDefsingleLM(0),
bDefdualLM(1),
bDefonewayDM(2),
bDeftwowayDM(3),
bDeftest(4),
bDefsingleSLM(5),
bDefreserved6(6),
bDefreserved7(7),
bDefreserved8(8),
bDefreserved9(9),
bDefreserved10(10),
bDefreserved11(11),
bDefreserved12(12),
bDefreserved13(13),
bDefreserved14(14),
bDefreserved15(15),
bDefreserved16(16),
bDefreserved17(17),
bDefreserved18(18),
bDefreserved19(19),
bDefreserved20(20),
bDefreserved21(21),
bDefreserved22(22),
bDefreserved23(23),
bDefreserved24(24),
bDefreserved25(25),
bDefreserved26(26),
bDefreserved27(27),
bDefreserved28(28),
bDefreserved29(29),
bDefreserved30(30),
bDefreserved31(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the task type of the PM instance.
Options:
1. bDefsingleLM(0) -indicates the single-ended loss measurement
2. bDefdualLM(1) -indicates the dual-ended loss measurement
3. bDefonewayDM(2) -indicates the one-way time delay measurement
4. bDeftwowayDM(3) -indicates the two-way time delay measurement
5. bDeftest(4) -indicates the test loss measurement
6. bDefsingleSLM(5) -indicates the single-ended synthetic loss measurement
Other bits are reserved. For each bit, 1 indicates that the PM task is valid,
and 0 indicates that the PM task is invalid.
Default: 0.
"
::= { hwOntY1731TestIdEntry 11 }
hwOntY1731TaskIfActive OBJECT-TYPE
SYNTAX BITS
{
bDefsingleLMIfActive(0),
bDefdualLMIfActive(1),
bDefonewayDMIfActive(2),
bDeftwowayDMIfActive(3),
bDeftestIfActive(4),
bDefsingelSLMIfActive(5),
bDefreserved6(6),
bDefreserved7(7),
bDefreserved8(8),
bDefreserved9(9),
bDefreserved10(10),
bDefreserved11(11),
bDefreserved12(12),
bDefreserved13(13),
bDefreserved14(14),
bDefreserved15(15),
bDefreserved16(16),
bDefreserved17(17),
bDefreserved18(18),
bDefreserved19(19),
bDefreserved20(20),
bDefreserved21(21),
bDefreserved22(22),
bDefreserved23(23),
bDefreserved24(24),
bDefreserved25(25),
bDefreserved26(26),
bDefreserved27(27),
bDefreserved28(28),
bDefreserved29(29),
bDefreserved30(30),
bDefreserved31(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the role of the PM task.
Options:
1. bDefsingleLMIfActive(0) -indicates the role of the single-ended loss measurement
2. bDefdualLMIfActive(1) -indicates the role of the dual-ended loss measurement
3. bDefonewayDMIfActive(2) -indicates the role of the one-way time delay measurement
4. bDeftwowayDMIfActive(3) -indicates the role of the two-way time delay measurement
5. bDeftestIfActive(4) -indicates the role of the test loss measurement
6. bDefsingelSLMIfActive(5) -indicates the role of the single-ended synthetic loss measurement
Other bits are reserved. For each bit, when the corresponding bit of hwOntY1731TaskType is 1,
1 indicates that the role of the PM task is sender, and 0 indicates that the role of the PM task is receiver.
Default: 0.
"
::= { hwOntY1731TestIdEntry 12 }
hwOntY1731TaskIsContinue OBJECT-TYPE
SYNTAX BITS
{
bDefsingleLMIsContinue(0),
bDefdualLMIsContinue(1),
bDefonewayDMIsContinue(2),
bDeftwowayDMIsContinue(3),
bDeftestIsContinue(4),
bDefsingelSLMIsContinue(5),
bDefreserved6(6),
bDefreserved7(7),
bDefreserved8(8),
bDefreserved9(9),
bDefreserved10(10),
bDefreserved11(11),
bDefreserved12(12),
bDefreserved13(13),
bDefreserved14(14),
bDefreserved15(15),
bDefreserved16(16),
bDefreserved17(17),
bDefreserved18(18),
bDefreserved19(19),
bDefreserved20(20),
bDefreserved21(21),
bDefreserved22(22),
bDefreserved23(23),
bDefreserved24(24),
bDefreserved25(25),
bDefreserved26(26),
bDefreserved27(27),
bDefreserved28(28),
bDefreserved29(29),
bDefreserved30(30),
bDefreserved31(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating mode of the PM task.
Options:
1. bDefsingleLM(0) -indicates the operating mode of the single-ended loss measurement
2. bDefdualLM(1) -indicates the operating mode of the dual-ended loss measurement
3. bDefonewayDM(2) -indicates the operating mode of the one-way time delay measurement
4. bDeftwowayDM(3) -indicates the operating mode of the two-way time delay measurement
5. bDeftest(4) -indicates the operating mode of the test loss measurement
6. bDefsingleSLM(5) -indicates the operating mode of the single-ended synthetic loss measurement
Other bits are reserved. For each bit, when the corresponding bit of hwOntY1731TaskType is 1,
1 indicates that the PM task runs according to demand, and 0 indicates that the PM task runs continuously.
Default: 0.
"
::= { hwOntY1731TestIdEntry 13 }
-- ******************************************************************
-- ONT PM config table
-- ******************************************************************
hwOntY1731ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOntY1731ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the information for PM Task.
The indexes of this table are hwOntY1731TestId and hwOntY1731CmdType.
"
::= { hwEthernetOAMMibObject 25 }
hwOntY1731ConfigEntry OBJECT-TYPE
SYNTAX HwOntY1731ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the information for PM Task.
The indexes of this entry are hwOntY1731TestId and hwOntY1731CmdType.
"
INDEX
{
hwOntY1731TestId,
hwOntY1731CmdType
}
::= { hwOntY1731ConfigTable 1 }
HwOntY1731ConfigEntry ::=
SEQUENCE {
hwOntY1731CmdType
INTEGER,
hwOntY1731CmdEnable
TruthValue,
hwOntY1731IfActive
TruthValue
}
hwOntY1731CmdType OBJECT-TYPE
SYNTAX INTEGER
{
singleLM(1),
dualLM(2),
onewayDM(3),
twowayDM(4),
test(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the type of the PM task.
Options:
1. singleLM(1) -indicates the type of the PM task is single-ended loss measurement
2. dualLM(2) -indicates the type of the PM task is dual-ended loss measurement
3. onewayDM(3) -indicates the type of the PM task is one-way time delay measurement
4. twowayDM(4) -indicates the type of the PM task is two-way time delay measurement
5. test(5) -indicates the type of the PM task is test loss measurement
"
::= { hwOntY1731ConfigEntry 1 }
hwOntY1731CmdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operating of the PM task.
Options:
1. true(1) -indicates the start operation
2. false(2) -indicates the stop operation
"
::= { hwOntY1731ConfigEntry 2 }
hwOntY1731IfActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the role of the PM task.
Options:
1. true(1) -indicates the role of the PM task is sender
2. false(2) -indicates the role of the PM task is receiver
"
::= { hwOntY1731ConfigEntry 3 }
hwCfmMaExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmMaExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates an MA extension table.
The indexes of this table are dot1agCfmMdIndex and dot1agCfmMaIndex.
"
::= { hwEthernetOAMMibObject 26 }
hwCfmMaExtEntry OBJECT-TYPE
SYNTAX HwCfmMaExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates an MA extension table.
The indexes of this entry are dot1agCfmMdIndex and dot1agCfmMaIndex.
"
INDEX
{
dot1agCfmMdIndex,
dot1agCfmMaIndex
}
::= { hwCfmMaExtTable 1 }
HwCfmMaExtEntry ::=
SEQUENCE
{
hwCfmMaClientLevel
Integer32,
hwCfmMaAISInterval
INTEGER
}
hwCfmMaClientLevel OBJECT-TYPE
SYNTAX Integer32(0..7 | 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the client level at which an AIS packet is sent by an MEP.
Default: 255
255 is used to delete client level of MA.
"
REFERENCE
"Y.1731-7.4.1"
::= { hwCfmMaExtEntry 1 }
hwCfmMaAISInterval OBJECT-TYPE
SYNTAX INTEGER
{
interval1s(1),
interval1m(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interval at which an AIS packet is sent by an MEP.
Options:
1. interval1s(1) -The AIS packet is sent per second
2. interval1m(2) -The AIS packet is sent per minute
Default:interval1s(1)
"
REFERENCE
"Y.1731-7.4.1"
::= { hwCfmMaExtEntry 2 }
hwCfmCcAlarmMode OBJECT-TYPE
SYNTAX INTEGER
{
summary(1),
detail(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CC alarm mode of Ethernet OAM.
Options:
1. summary(1) -Indicates that the CC alarm mode of Ethernet OAM is summary, and the alarm parameter contains only the indexes of MEP management objects: MD index, MA index, and MEP ID.
2. detail(2) -Indicates that the CC alarm mode of Ethernet OAM is detail, and the alarm parameter contains MD index, MA index, MEP ID, alarm type, frame ID, slot ID, port ID, ONT ID, GEM index, GEM port ID, MA VLAN, Vlantag1, and Vlantag2.
Default: summary(1)
"
::= { hwEthernetOAMMibObject 27 }
END
View Git Blame Copy Permalink