WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HUAWEI-ETHERLIKE-EXT-MIB

22347 lines
916 KiB
Plaintext
Raw Blame History

-- ============================================================================
-- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: This MIB is used for defining Huawei's etherlike extended attributes, including
-- ETH port, vlan, service-port, MAC address, queue, Ip traffic parameters, HQos,
-- Net-role, traffic controling.
-- Reference: HUAWEI-DEVICE-MIB,HUAWEI-MIB,HUAWEI-VLAN-MIB,HUAWEI-ETHERNET-OPTICMODULE-MIB
-- Version: V5.78
-- ============================================================================
HUAWEI-ETHERLIKE-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwFrameIndex, hwSlotIndex, hwPortIndex, hwPortDesc, hwPortPrimaryStatus, hwPortSecondaryStatus, hwConfigChangeIP
FROM HUAWEI-DEVICE-MIB
huaweiMgmt
FROM HUAWEI-MIB
hwOpticsTemperature, hwOpticsPowerTxLowerThresholdValue,hwOpticsPowerTxUpperThresholdValue,hwOpticsTxPower,hwOpticsRxPower,
hwOpticsPowerRxUpperThresholdValue,hwOpticsPowerRxLowerThresholdValue,hwOpticsTemperatureUpperThresholdValue,
hwOpticsTemperatureLowerThresholdValue,hwOpticsVoltageUpperThresholdValue,hwOpticsVoltageLowerThresholdValue,
hwOpticsSupplyVoltage,hwOpticsCurrentUpperThresholdValue,hwOpticsCurrentLowerThresholdValue,hwOpticsTxBiasCurrent,
hwOpticsLaserTemperatureUpperThresholdValue,hwOpticsLaserTemperatureLowerThresholdValue,hwOpticsLaserTemperature,
hwOpticsWaveLengthUpperThresholdValue,hwOpticsWaveLengthLowerThresholdValue,hwOpticsWaveLength,
hwOpticsTecCurrentUpperThresholdValue,hwOpticsTecCurrentLowerThresholdValue,hwOpticsTecCurrent
FROM HUAWEI-ETHERNET-OPTICMODULE-MIB
ifIndex, InterfaceIndex
FROM IF-MIB
TimeTicks, Counter32, Counter64, IpAddress, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-IDENTITY,Integer32,Unsigned32
FROM SNMPv2-SMI
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
hwVlanIndex
FROM HUAWEI-VLAN-MIB
hwProtection,hwPgGroupId,hwPsGroupLoadBalanceState
FROM HUAWEI-PROTECTION-MIB
InetAddressType,InetAddress,InetAddressPrefixLength,InetPortNumber
FROM INET-ADDRESS-MIB
TruthValue, RowStatus, MacAddress, TEXTUAL-CONVENTION, DisplayString,DateAndTime
FROM SNMPv2-TC
hwOntIndex
FROM HUAWEI-DEVICE-MIB;
hwEthernetPort MODULE-IDENTITY
LAST-UPDATED "201903190000Z"
ORGANIZATION "Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"This MIB is used for defining Huawei's etherlike extended attributes, including
ETH port, vlan, service-port, MAC address, queue, Ip traffic parameters, HQos,
Net-role, traffic controling.
"
-- Revision history
REVISION "201903190000Z"
DESCRIPTION "V5.78, modified the MAX-ACCESS of hwifEthernetComboWorkMode from read-only to read-write"
REVISION "201903130000Z"
DESCRIPTION "V5.77, modified the description of hwQueueStatsStartTime"
REVISION "201901230000Z"
DESCRIPTION "V5.76, modified the description of HwAggregatePortEntry"
REVISION "201812210000Z"
DESCRIPTION "V5.75, modified the description of hwAggregatePortStatus, hwMacHashConflictRecordEntry, hwAggregatePortEntry"
REVISION "201811200000Z"
DESCRIPTION "V5.74, added new table hwExtProtocolForceForwardingPolicyTable."
REVISION "201810200000Z"
DESCRIPTION "V5.73, added leaf node hwifAggregateStatus of hwifAggregateTable.
Added new table hwAggregatePortTable."
REVISION "201810120000Z"
DESCRIPTION "V5.72, modified the description of hwifEthernetSpeed"
REVISION "201809260000Z"
DESCRIPTION "V5.71, modified the description of hwQueuePerformanceStatsTable, hwQueuePerformanceStatsEntry, hwAggLoadbalancingConfigTable, hwAggLoadbalancingConfigEntry,
hwAggLoadbalancingTable, hwAggLoadbalancingEntry"
REVISION "201809160000Z"
DESCRIPTION "V5.70, added leaf node hwPort10GLicControlObjects,hwPort10GlicPortNum,hwPort10GLicRtuAuthSwitch"
REVISION "201809100000Z"
DESCRIPTION "V5.69, modified the range of leaf node hwAggLBInportIndex."
REVISION "201808270000Z"
DESCRIPTION "V5.68, added leaf node hwAggLBInportIndex of hwAggLoadbalancingConfigTable."
REVISION "201808250000Z"
DESCRIPTION "V5.67, added leaf node hwOnuSwitchNotifyConfigIpv6."
REVISION "201808090000Z"
DESCRIPTION "V5.66, added leaf node hwEthernetLightTestTimeduration, hwEthernetLightTestTestStatus,
hwEthernetLightTestFinshStatus."
REVISION "201807060000Z"
DESCRIPTION "V5.65, added enumerated s100000M(100000) in hwifEthernetSpeed leaf node;
added enumerated onehundredge(4) in hwifEthernetPortType leaf node."
REVISION "201806120000Z"
DESCRIPTION "V5.64, added the enumerated value vxlan(18) to the hwExtSrvFlowSourceParaType leaf.
modified the description of hwExtSrvFlowSourceParaType and hwExtSrvFlowSourceMultiServiceUserPara.
added leaf node hwifAggregateRandomSeed of hwifAggregateTable.
added new table hwAggLoadbalancingConfigTable.
added new table hwAggLoadbalancingTable."
REVISION "201804260000Z"
DESCRIPTION "V5.63, added leaf nodes hwSRv6TunnelHardwareOverloadTrap, hwSRv6TunnelHardwareOverloadRestoreTrap.
added enumerated srv6tunnelhardware(6) in hwResourceType leaf node."
REVISION "201803270000Z"
DESCRIPTION "V5.62, added leaf nodes hwIPTunnelHardwareOverloadTrap, hwIPTunnelHardwareOverloadRestoreTrap, hwVPNHardwareOverloadTrap, hwVPNHardwareOverloadRestoreTrap.
added enumerated iptunnelhardware(4) and vpnhardware(5) in hwResourceType leaf node."
REVISION "201803200000Z"
DESCRIPTION "V5.61, modified the description of leaf nodes hwExtSrvFlowPara4, hwExtSrvFlowPara5."
REVISION "201803190000Z"
DESCRIPTION "V5.60, modified the range of leaf nodes hwifEthernetPauseFrameTag:
hwifEthernetComboWorkMode and hwifEthernetLinkflapping"
REVISION "201803150000Z"
DESCRIPTION "V5.59, Add the following leave into hwEthernetLineGlobalConfig:
hwOpticsModuleShowMode."
REVISION "201803010000Z"
DESCRIPTION "V5.58, modified the range of leaf nodes hwExtSrvFlowSourceMultiServiceType."
REVISION "201802240000Z"
DESCRIPTION "V5.57, added leaf node hwifEthernetTrafficRateBroadcast, hwifEthernetTrafficRateMulticast,
hwifEthernetTrafficRateUnknowncast."
REVISION "201802050000Z"
DESCRIPTION "V5.56, added leaf node hwTrafficSuppressRateBroadcast, hwTrafficSuppressRateMulticast,
hwTrafficSuppressRateUnknowncast."
REVISION "201801180000Z"
DESCRIPTION "V5.55, modified the description of leaf nodes hwDslamNonUnicastUpportMonitorBroadcastThdDeftAutoValue, hwDslamNonUnicastUpportMonitorUnknownUnicastThdDeftAutoValue,
hwDslamNonUnicastUpportMonitorUnknownMulticastThdDeftAutoValue, hwDslamNonUnicastUpportMonitorBroadcastThd,
hwDslamNonUnicastUpportMonitorUnknownUnicastThd, hwDslamNonUnicastUpportMonitorUnknownMulticastThd,
hwDslamNonUnicastUpportMonitorBroadcastThdActiveValue, hwDslamNonUnicastUpportMonitorUnknownUnicastThdActiveValue,
hwDslamNonUnicastUpportMonitorUnknownMulticastThdActiveValue"
REVISION "201801160000Z"
DESCRIPTION "V5.54, modified the UNITS of leaf nodes hwDslamNonUnicastUpportMonitorBroadcastRate, hwDslamNonUnicastUpportMonitorUnknownUnicastRate,
hwDslamNonUnicastUpportMonitorUnknownMulticastRate, hwDslamNonUnicastUpportMonitorPeakBroadcastRate,
hwDslamNonUnicastUpportMonitorPeakUnknownUnicastRate, hwDslamNonUnicastUpportMonitorPeakUnknownMulticastRate."
REVISION "201712110000Z"
DESCRIPTION "V5.53, added leaf node hwDslamNonUnicastUpportMonitorSwitch, hwDslamNonUnicastUpportMonitorPeriod,
hwDslamNonUnicastUpportMonitorBroadcastThdDeftAutoValue,
hwDslamNonUnicastUpportMonitorUnknownUnicastThdDeftAutoValue,
hwDslamNonUnicastUpportMonitorUnknownMulticastThdDeftAutoValue,
hwDslamNonUnicastUpportMonitorNotifySwitch,
hwDslamNonUnicastUpportMonitorStartTime, hwDslamNonUnicastUpportMonitorEndTime.
added new table hwDslamNonUnicastUpportMonitor, hwDslamNonUnicastUpportMonitorMemberTable,
hwDslamNonUnicastUpportMonitorRecordTable, hwDslamNonUnicastUpportMonitorPeakRecordTable.
added new trap hwDslamNonUnicastUpportMonitorRecordTrap."
REVISION "201711290000Z"
DESCRIPTION "V5.52, modify description of leaf node hwifEthernetLineTest, add -1 which means notSupport."
REVISION "201711200000Z"
DESCRIPTION "V5.51, deleted leaf node hwDslamNonUnicastUpportMonitorSwitch, hwDslamNonUnicastUpportMonitorPeriod,
hwDslamNonUnicastUpportMonitorBroadcastThreshold,
hwDslamNonUnicastUpportMonitorUnknownUnicastThreshold,
hwDslamNonUnicastUpportMonitorUnknownMulticastThreshold,
hwDslamNonUnicastUpportMonitorNotifySwitch,
hwDslamNonUnicastUpportMonitorStartTime, hwDslamNonUnicastUpportMonitorEndTime.
deleted table hwDslamNonUnicastUpportMonitor, hwDslamNonUnicastUpportMonitorMemberTable,
hwDslamNonUnicastUpportMonitorRecordTable, hwDslamNonUnicastUpportMonitorPeakRecordTable.
deleted trap hwDslamNonUnicastUpportMonitorRecordTrap."
REVISION "201710300000Z"
DESCRIPTION "V5.50, added leaf node hwDslamNonUnicastUpportMonitorSwitch, hwDslamNonUnicastUpportMonitorPeriod,
hwDslamNonUnicastUpportMonitorBroadcastThreshold,
hwDslamNonUnicastUpportMonitorUnknownUnicastThreshold,
hwDslamNonUnicastUpportMonitorUnknownMulticastThreshold,
hwDslamNonUnicastUpportMonitorNotifySwitch,
hwDslamNonUnicastUpportMonitorStartTime, hwDslamNonUnicastUpportMonitorEndTime.
added new table hwDslamNonUnicastUpportMonitor, hwDslamNonUnicastUpportMonitorMemberTable,
hwDslamNonUnicastUpportMonitorRecordTable, hwDslamNonUnicastUpportMonitorPeakRecordTable.
added new trap hwDslamNonUnicastUpportMonitorRecordTrap."
REVISION "201710260000Z"
DESCRIPTION "V5.49, modified the range of leaf nodes hwifEthernetPauseFrameTag, add two enumeration value"
REVISION "201709250000Z"
DESCRIPTION "V5.48, added leaf node hwQueueStatisticsPassedGreenBytes,hwQueueStatisticsPassedGreenNumber,
hwQueueStatisticsPassedYellowBytes,hwQueueStatisticsPassedYellowNumber.
added leaf node hwQueueStatsPassedGreenBytes,hwQueueStatsPassedGreenNumber,
hwQueueStatsPassedYellowBytes,hwQueueStatsPassedYellowNumber."
REVISION "201709080000Z"
DESCRIPTION "V5.47,add leaf node hwFabricMacHashConflictAutoAdjust.
added new table hwMacHashConflictRecordTable.
add leaf nodes hwMacHashConflictRecordIndex, hwMacHashConflictRecordMacAddress,
hwMacHashConflictRecordVlan, hwMacHashConflictRecordLocation, hwMacHashConflictRecordDetectedTime,
hwMacHashConflictRecordResolvedTime."
REVISION "201709060000Z"
DESCRIPTION "V5.46, modified the description of trap hwPacketAttackTrap.
added new trap hwInnerForwardingFaultAlarmTrap and hwInnerForwardingRecoverAlarmTrap.
added leaf node hwifAggregateHashOption of hwifAggregateTable."
REVISION "201708210000Z"
DESCRIPTION "V5.45,modified the description and value list of leaf node hwCarGroupSrvFlowEndPointType."
REVISION "201708140000Z"
DESCRIPTION "V5.44,modified the description of leaf node hwExtSrvFlowSourcePara1,hwExtSrvFlowSourcePara2,hwExtSrvFlowSourcePara3 ."
REVISION "201708010000Z"
DESCRIPTION "V5.43,modified MAX-ACCESS of leaf node hwQueueStatsTimeElapsed ."
REVISION "201707180000Z"
DESCRIPTION "V5.42, added new table hwQueuePerformanceStatsTable.
added leaf nodes hwQueueStatsIntervalType, hwQueueStatsIntervalNumId,
hwQueueStatsDroppedYellowNumber,hwQueueStatsDroppedGreenNumber,
hwQueueStatsDroppedUnRecognizedColorNumber,hwQueueStatsPassedNumber,
hwQueueStatsPassedBytes,hwQueueStatsTimeElapsed,
hwQueueStatsValidInterval,hwQueueStatsStartTime,
added leaf nodes hwQueueStatisticsDroppedUnRecognizedColorNumber, hwQueueStatisticsDroppedGreenNumber,
hwQueueStatisticsDroppedYellowNumber of hwQueueStatisticsstateTable."
REVISION "201707130000Z"
DESCRIPTION "V5.41, added leaf node hwifEthernetOfflineTxOffTime of hwEthernetTable."
REVISION "201707120000Z"
DESCRIPTION "V5.40, added leaf node hwCarGroupSrvFlowEndPointType of hwCarGroupSrvFlowTable."
REVISION "201706260000Z"
DESCRIPTION "V5.39, added leaf node hwMacAddressClearForOntPortDownSwitch.
added new trap hwPacketAttackTrap.
added leaf node hwPacketAttackMACAddress.
added leaf node hwPacketNumberOfMACAddress.
added leaf node hwPacketAttackPacketType.
added leaf node hwPacketNumberOfPacketType."
REVISION "201706210000Z"
DESCRIPTION "V5.38, modified the range of leaf nodes hwifEthernetMTU and hwXponPortMtu."
REVISION "201706080000Z"
DESCRIPTION "V5.37, added leaf node hwTrafficUpportMonitorUpstreamLast, hwTrafficUpportMonitorUpstream,
hwTrafficUpportMonitorDownstreamLast, hwTrafficUpportMonitorDownstream,
hwDslamTrafficUpportMonitorUpstreamLast, hwDslamTrafficUpportMonitorDownstreamLast,
hwDslamTrafficUpportMonitorNotifySwitch, hwDslamTrafficUpportMonitorActiveThreshold,
hwDslamTrafficUpportMonitorStartTime, hwDslamTrafficUpportMonitorEndTime,
hwDslamTrafficUpportMonitorPeakRecordTable, hwDslamTrafficUpportMonitorPeakRecordEntry,
hwDslamTrafficUpportMonitorPeakRecordIfIndex, hwDslamTrafficUpportMonitorPeakUpstreamRecordTime,
hwDslamTrafficUpportMonitorPeakUpstream, hwDslamTrafficUpportMonitorPeakDownstreamRecordTime,
hwDslamTrafficUpportMonitorPeakDownstream.
Modified the SYNTAX of hwDslamTrafficUpportMonitorUpstream, hwDslamTrafficUpportMonitorDownstream."
REVISION "201705230000Z"
DESCRIPTION "V5.36, added leaf node hwifEthernetLinkflapping of hwEthernetTable."
REVISION "201704050000Z"
DESCRIPTION "V5.35, added leaf node hwRateProfileIndex of hwRateProfileTable."
REVISION "201703270000Z"
DESCRIPTION "V5.34, added leaf nodes hwDslamTrafficUpportMonitor,hwDslamTrafficUpportMonitorSwitch
hwDslamTrafficUpportMonitorPeriod,hwDslamTrafficUpportMonitorThreshold,hwDslamTrafficUpportMonitorMemberTable,
hwDslamTrafficUpportMonitorMemberEntry,hwDslamTrafficUpportMonitorMemberIfIndex,hwDslamTrafficUpportMonitorRowStatus,
hwDslamTrafficUpportMonitorRecordTable,hwDslamTrafficUpportMonitorRecordEntry,hwDslamTrafficUpportMonitorRecordIfIndex,
hwDslamTrafficUpportMonitorRecordIndex,hwDslamTrafficUpportMonitorRecordTime,hwDslamTrafficUpportMonitorUptream,
hwDslamTrafficUpportMonitorDownStream."
REVISION "201703250000Z"
DESCRIPTION "V5.33, modified the range of leaf nodes hwifEthernetMTU."
REVISION "201703130000Z"
DESCRIPTION "V5.32, added new table hwXponPortMtuTable."
REVISION "201702250000Z"
DESCRIPTION "V5.31, modified the description of leaf nodes hwSrvFlowBundleMemberSortPara and hwExtSrvFlowBundleMemberSortPara."
REVISION "201701250000Z"
DESCRIPTION "V5.30, added leaf node hwUplinkSwitchNotifyConfigBtv."
REVISION "201612200000Z"
DESCRIPTION "V5.29, added leaf node hwShapingBurstSizeConfigMode."
REVISION "201612020000Z"
DESCRIPTION "V5.28,deleted the default value of the leaf node hwPriorityGroupCarStatRowStatus.
Modified the description of leaf nodes hwPriorityGroupCarStatTimeoutDuration, hwPriorityGroupCarStatRunningStatus and hwPriorityGroupCarStatRemainTime."
REVISION "201612010000Z"
DESCRIPTION "V5.27, added leaf nodes hwMacLimitActionSwitch, hwMacLimitSendEvent of hwEthernetPort.
Added trap nodes hwMacLimitOverflowTrap, hwMacLimitOverflowRecoverTrap of hwEthernetAlarmTrapsOids."
REVISION "201611150000Z"
DESCRIPTION "V5.26, added leaf node hwPriorityGroupCarStatRemainTime of hwPriorityGroupCarStatTable.
Modified the index order of the hwPriorityGroupCarStatTable.
Modified the attribute of the hwPriorityGroupCarStatDirection.
Modified the range value of the hwPriorityGroupCarStatTimeoutDuration."
REVISION "201610250000Z"
DESCRIPTION "V5.25, added leaf node hwIpTrafficWrrWeightGreen of hwIpTrafficParamTable.
Modified the value range of the trap node hwIpTrafficParamChangeTrap.
Modified the OID of table hwBoardCrcErrorAlarmControlTable."
REVISION "201610200000Z"
DESCRIPTION "V5.24, added leaf node hwifEthernetOpticModuleState of hwEthernetTable."
REVISION "201610190000Z"
DESCRIPTION "V5.23, modified the description of leaf nodes hwTrafficSuppressBroadcast, hwTrafficSuppressMulticast, hwTrafficSuppressUnknowncast and hwCtpEthJumboFrameEnable."
REVISION "201610100000Z"
DESCRIPTION "V5.22, modified the type of leaf node hwQueueStatisticsPassedNumber and hwQueueStatisticsDroppedNumber from Unsigned32 to Counter64.
added leaf node hwIpTrafficWrrWeightYellow of hwIpTrafficParamTable.
Modified the value range of the trap node hwIpTrafficParamChangeTrap."
REVISION "201609240000Z"
DESCRIPTION "V5.21, added new table hwBoardCrcErrorAlarmControlTable.
Added leaf nodes hwBoardCrcErrorAlarmSwitch, hwBoardCrcErrorAlarmDetectInterval, hwBoardCrcErrorAlarmDetectMultiplier."
REVISION "201609170000Z"
DESCRIPTION "V5.20, added leaf node hwCtpEthJumboFrameEnable of hwCtpEthAttributeCfgTable.
Modified the description of leaf nodes hwTrafficSuppressBroadcast, hwTrafficSuppressMulticast and hwTrafficSuppressUnknowncast"
REVISION "201609130000Z"
DESCRIPTION "V5.19, modified the description of hwIpTrafficE2EPriorityMappingIndex."
REVISION "201608290000Z"
DESCRIPTION "V5.18, added new table hwAutoDeleteUnusedProfileTable and hwPriorityGroupCarStatTable.
Added leaf nodes hwIpTrafficRateProfileName, hwIpTrafficQueuePolicyProfileIndex and hwIpTrafficPriorityGroupProfileName.
Added leaf node hwTrafficInnerPriForceModify.
Modified the value range of hwIpTrafficPriorityPolicy and hwPbitsToPbitsMappingIndex."
REVISION "201608190000Z"
DESCRIPTION "V5.17, added new table hwRateProfileTable, hwQueuePolicyProfileTable and hwPriorityGroupProfileTable."
REVISION "201606130000Z"
DESCRIPTION "V5.16, added leaf nodes hwIpTrafficE2EPriority, hwIpTrafficE2EPriorityMappingIndex."
REVISION "201604130000Z"
DESCRIPTION "V5.15, modified the value range of hwCarGroupIndex, hwCarGroupMemberIndex."
REVISION "201603230000Z"
DESCRIPTION "V5.14, modified the value range of hwProfileCosQueueMaxBufferSizeQueue0, hwProfileCosQueueMaxBufferSizeQueue1,
hwProfileCosQueueMaxBufferSizeQueue2, hwProfileCosQueueMaxBufferSizeQueue3,
hwProfileCosQueueMaxBufferSizeQueue4, hwProfileCosQueueMaxBufferSizeQueue5,
hwProfileCosQueueMaxBufferSizeQueue6, hwProfileCosQueueMaxBufferSizeQueue7,
hwQueueMaxBufferSizeQueue0,hwQueueMaxBufferSizeQueue1,hwQueueMaxBufferSizeQueue2,
hwQueueMaxBufferSizeQueue3,hwQueueMaxBufferSizeQueue4,hwQueueMaxBufferSizeQueue5,
hwQueueMaxBufferSizeQueue6 and hwQueueMaxBufferSizeQueue7."
REVISION "201603180000Z"
DESCRIPTION "V5.13, modified the value range of hwStaticMacIndex, hwStaticNextFreeIndex."
REVISION "201601300000Z"
DESCRIPTION "V5.12, modified the description of trap node hwMacConflictNewTrap."
REVISION "201601210000Z"
DESCRIPTION "V5.11, modified the description of hwXponCarportColorSensitive."
REVISION "201601160000Z"
DESCRIPTION "V5.10, added leaf node hwFlappingMacAddress,
modifyed the OBJECT of hwMacAddressFlappingOverTrap, hwMacAddressFlappingOverRestoreTrap."
REVISION "201512220000Z"
DESCRIPTION "V5.09, added leaf nodes hwProfileCosQueueMaxBufferSizeQueue0, hwProfileCosQueueMaxBufferSizeQueue1,
hwProfileCosQueueMaxBufferSizeQueue2, hwProfileCosQueueMaxBufferSizeQueue3,
hwProfileCosQueueMaxBufferSizeQueue4, hwProfileCosQueueMaxBufferSizeQueue5,
hwProfileCosQueueMaxBufferSizeQueue6 and hwProfileCosQueueMaxBufferSizeQueue7.
added new table hwQueueMaxBufferSizeTable."
REVISION "201512040000Z"
DESCRIPTION "V5.08, added leaf nodes hwMacAddressFlappingPortInfo,
hwMacAddressFlappingOverTrap,
hwMacAddressFlappingOverRestoreTrap."
REVISION "201511200000Z"
DESCRIPTION "V5.07, added leaf nodes hwMacAddressFlappingDetectionControl, hwMacAddressFlappingDetectionPeriod,
hwMacAddressFlappingDetectionLowerThreshold, hwMacAddressFlappingDetectionUpperThreshold."
REVISION "201511090000Z"
DESCRIPTION "V5.06, added two enumerated values byDoubleVlan(5) and by8021pList(6) in hwFlowMulitiServiceType leaf node."
REVISION "201510130000Z"
DESCRIPTION "V5.05, added new table hwIpTrafficNameToIndexTable."
REVISION "201510090000Z"
DESCRIPTION "V5.04, added leaf node hwIpTrafficColorSource.
added leaf nodes hwProfileCosQueueWREDIndexQue0, hwProfileCosQueueWREDIndexQue1,
hwProfileCosQueueWREDIndexQue2, hwProfileCosQueueWREDIndexQue3,
hwProfileCosQueueWREDIndexQue4, hwProfileCosQueueWREDIndexQue5,
hwProfileCosQueueWREDIndexQue6 and hwProfileCosQueueWREDIndexQue7."
REVISION "201509170000Z"
DESCRIPTION "V5.03, added enumerated rf(17) in hwExtSrvFlowSourceParaType leaf node."
REVISION "201509020000Z"
DESCRIPTION "V5.02, added the definition of the trap node hwMacConflictNewTrap"
REVISION "201508290000Z"
DESCRIPTION "V5.01, added the hwOnuSwitchNotify.
added leaf node hwOnuSwitchNotifyConfigIpv4.
modified the description of hwUplinkSwitchNotifyConfig."
REVISION "201508270000Z"
DESCRIPTION "V5.00, added new table hwPortAutoServiceParaTable."
REVISION "201508040000Z"
DESCRIPTION "V4.99, added the hwUplinkSwitchNotify.
added leaf node hwifAggregateLeastLinkNum of hwifAggregateTable.
modified the description of hwifAggregateMaxLinkNum."
REVISION "201507140000Z"
DESCRIPTION "V4.98, added the definition of the trap nodes: hwPortCmtsFrameAddFailTrap."
REVISION "201506230000Z"
DESCRIPTION "V4.97, added the definition of the trap nodes: hwPortAutoServiceAddFailureTrap, hwPortAutoServiceParaIncorrectTrap.
added the definition of the nodes: hwAutoServiceAddContent, hwAutoServiceProcResult.
"
REVISION "201506090000Z"
DESCRIPTION "V4.96, added the definition of the trap nodes: hwIPRouteHardwareOverloadTrap, hwIPRouteHardwareOverloadRestoreTrap.
added enumerated iproutehardware(3) in hwResourceType leaf node.
"
REVISION "201505070000Z"
DESCRIPTION "V4.95, added new table hwOntBindQosPolicyProfileTable."
REVISION "201504170000Z"
DESCRIPTION "V4.94, added enumerated off(3) and colorWred(4) in hwEarlyDropMode leaf node."
REVISION "201504160000Z"
DESCRIPTION "V4.93, modify the description of hwIpTrafficDSCP and hwIpTrafficDSCPMappingIndex."
REVISION "201504100000Z"
DESCRIPTION "V4.92, modify the description of the leaf nodes in hwAggregateStatisticsTable."
REVISION "201504020000Z"
DESCRIPTION "V4.91, modify the value range of hwCosPortOntId, hwCosPortGemIndex and hwFlowIndexQueryForPPPoESmltOnuId."
REVISION "201503160000Z"
DESCRIPTION "V4.90, modify mib leaf node of the hwExtSrvFlowVlanid value range, modified the MAX-ACCESS of leaf nodes hwCarGroupIndex."
REVISION "201503120000Z"
DESCRIPTION "V4.89, modify the gfast to fast of the hwExtSrvFlowParaType value range."
REVISION "201501200000Z"
DESCRIPTION "V4.88, modify mib leaf node hwExtSrvFlowNNIInnerVlanId, hwExtSrvFlowSimulationServiceType."
REVISION "201412300000Z"
DESCRIPTION "V4.87, added new table hwEthTrafficSuppressDefaultTable."
REVISION "201412200000Z"
DESCRIPTION "V4.86, modified the description of hwIpdslamBindIpTable, hwIpdslamBindIpEntry and hwIpdslamBindIpSubIndex."
REVISION "201412100000Z"
DESCRIPTION "V4.85, added leaf node hwifAggregateMasterPortIndex of hwifAggregateTable."
REVISION "201411280000Z"
DESCRIPTION "V4.84, added leaf node hwPortBindInboundQosPolicyProfileName."
REVISION "201411270000Z"
DESCRIPTION "V4.83, modified the value range of hwIpdslamBindIpMaskLength."
REVISION "201411180000Z"
DESCRIPTION "V4.82, modify mib leaf node hwIpTrafficCbs, hwIpTrafficPbs."
REVISION "201411070000Z"
DESCRIPTION "V4.81, added the enumerated value gfast(16) to the hwExtSrvFlowParaType leaf.
modified the description of hwExtSrvFlowPara1, hwExtSrvFlowPara2, hwExtSrvFlowPara3, hwExtSrvFlowPara4, hwExtSrvFlowPara5 and hwExtSrvFlowParaType."
REVISION "201410220000Z"
DESCRIPTION "V4.80, modify mib leaf node hwifEthernetTxPowerResumeDetect ."
REVISION "201410210000Z"
DESCRIPTION "V4.79, modified the MAX-ACCESS of leaf nodes hwifAggregateRowStatus, hwBoardBindRowStatus, hwPortVlanPolicingTrafficRowStatus,
hwCarGroupRowStatus, hwWREDRowStatus, hwCosQueueDepthRateSlotRowStatus, hwEarlyDropModeSlotRowStatus, hwSrvPortExtStatRowStatus,
hwStaticMacRowStatus, hwIsolateRowstatus, hwPortIsolateGroupRowStatus, hwDynamicMacRowStatus, hwUniServiceDataEntryStatus;
modified the MAX-ACCESS and value range of hwCarGroupIndex."
REVISION "201409150000Z"
DESCRIPTION "V4.78, added leaf nodes hwifEthernetTxPowerResumeDetect, hwifEthernetTxPowerDetectInterval,
hwifEthernetTxPowerResumeDuration and hwifEthernetTxPowerManualResume ."
REVISION "201408300000Z"
DESCRIPTION "V4.77, modified the syntax of hwStaticMacMacAddr from MacAddress to OCTET STRING.
Modified the description of hwIpTrafficInnerPriority.
Modified the definition of hwEarlyDropColorBasedThresholdCos0, hwEarlyDropColorBasedThresholdCos1, hwEarlyDropColorBasedThresholdCos2,
hwEarlyDropColorBasedThresholdCos3, hwEarlyDropColorBasedThresholdCos4, hwEarlyDropColorBasedThresholdCos5, hwEarlyDropColorBasedThresholdCos6,
and hwEarlyDropColorBasedThresholdCos7"
REVISION "201408190000Z"
DESCRIPTION "V4.76, added leaf nodes hwSrvPortExtStatUsDiscardedPacketsByL3Forward and hwSrvPortExtStatDsDiscardedPacketsByL3Forward."
REVISION "201408180000Z"
DESCRIPTION "V4.75, modify mib leaf node hwIpTrafficDropPrecedence;
added hwIpTrafficDSCP,hwIpTrafficDSCPMappingIndex,hwIpTrafficDropPrecedence,hwIpTrafficColorDEI as objects of hwIpTrafficParamChangeTrap;
modify the definition of the trap nodes: hwEthernetPortAggCfgChangeTrap."
REVISION "201408050000Z"
DESCRIPTION "V4.74, added new two tables hwDscpToDscpMappingTable, hwDscpColorToPbitsMappingTable;
added new leaf nodes hwIpTrafficCouplingFlag, hwIpTrafficDSCP, hwIpTrafficDSCPMappingIndex, hwIpTrafficDropPrecedence, hwIpTrafficColorDEI;
modified tge leaf nodes hwPbitsToPbitsMapping0,hwPbitsToPbitsMapping1,hwPbitsToPbitsMapping2,hwPbitsToPbitsMapping3,hwPbitsToPbitsMapping4,
hwPbitsToPbitsMapping5,hwPbitsToPbitsMapping6, hwPbitsToPbitsMapping7,hwPbitsToPbitsMappingRowStatus, hwIPPrecToPbitsMapping0,
hwIPPrecToPbitsMapping1,hwIPPrecToPbitsMapping2,hwIPPrecToPbitsMapping3,hwIPPrecToPbitsMapping4,hwIPPrecToPbitsMapping5,hwIPPrecToPbitsMapping6,
hwIPPrecToPbitsMapping7,hwCarThresholdProfileCos0,hwCarThresholdProfileCos1,hwCarThresholdProfileCos2,hwCarThresholdProfileCos3,
hwCarThresholdProfileCos4,hwCarThresholdProfileCos5,hwCarThresholdProfileCos6,hwCarThresholdProfileCos7."
REVISION "201407220000Z"
DESCRIPTION "V4.73, add the definition of the following traps:
hwOpticsLaserTemperatureOutOfRangeAlarmTrap,
hwOpticsLaserTemperatureRestoreAlarmTrap,
hwOpticsWavelengthOutOfRangeAlarmTrap,
hwOpticsWavelengthRestoreAlarmTrap,
hwOpticTecCurrentOutOfRangeAlarmTrap,
hwOpticsTecCurrentRestoreAlarmTrap."
REVISION "201407140000Z"
DESCRIPTION "V4.72, modified the description of hwSrvFlowBundleIndex,
added leaf nodes hwMacAddressLearnPolicy and hwPriTagTransDownstream."
REVISION "201407090000Z"
DESCRIPTION "V4.71, added enumerated dyinggasp(8) in hwifEthernetOfflineReason leaf node."
REVISION "201407080000Z"
DESCRIPTION "V4.70, added the definition of the trap nodes: hwEnableMirrorPortExtendTrap, hwDisableMirrorPortExtendTrap,
hwMirrorSrcPortDescription, hwMirrorDstPortDescription."
REVISION "201406290000Z"
DESCRIPTION "V4.69, Modified hwEthernet to hwEthernetPort because the HUAWEI-MIB changed.
Modified the following not normative nodes to satisfy for the new OMSYS tool.
hwifAggregateModel
hwLeftBrdPrimaryStatus
hwRightBrdPrimaryStatus
hwRightBrdSecondaryStatus
hwIpTrafficIndex
hwCosWREDThreshold2
hwCosWREDThreshold4
hwTrafficTablePriorityMappingMode
hwSrvAttrChangeType
hwExtSrvFlowIndex."
REVISION "201406050000Z"
DESCRIPTION "V4.68, added the definition of the trap nodes: hwBoardMacOverloadTrap, hwBoardMacOverloadRestoreTrap."
REVISION "201405070000Z"
DESCRIPTION "V4.67, added leaf nodes hwEthernetMirrorDirection and hwDisableMirrorPortTrap for trap of hwEthernetAlarmTraps.
modified leaf node hwBiuPortStatusChangeInfoTrap to hwBitsPortStateChangeType."
REVISION "201404210000Z"
DESCRIPTION "V4.66, added leaf node hwEthernetLineOfflineAutoShutdown to indicate the switch status of the offline ETH port auto shutdown switch state."
REVISION "201404020000Z"
DESCRIPTION "V4.65, modified the value range of hwProfileCosQueueWeightQue0, hwProfileCosQueueWeightQue1, hwProfileCosQueueWeightQue2, hwProfileCosQueueWeightQue3,
hwProfileCosQueueWeightQue4, hwProfileCosQueueWeightQue5, hwProfileCosQueueWeightQue6 and hwProfileCosQueueWeightQue7 of hwQosPolicyProfileTable.
modified the description of hwProfileCosQueueWeightQue0, hwProfileCosQueueWeightQue1, hwProfileCosQueueWeightQue2, hwProfileCosQueueWeightQue3,
hwProfileCosQueueWeightQue4, hwProfileCosQueueWeightQue5, hwProfileCosQueueWeightQue6 and hwProfileCosQueueWeightQue7 of hwQosPolicyProfileTable.
modified the description of hwCosQueueWeightQue0, hwCosQueueWeightQue1, hwCosQueueWeightQue2, hwCosQueueWeightQue3, hwCosQueueWeightQue4,
hwCosQueueWeightQue5, hwCosQueueWeightQue6, hwCosQueueWeightQue7 of hwCosQueueSchedTable.
added new table hwBoardMacAddressLearningVlanConnectTable."
REVISION "201401160000Z"
DESCRIPTION "V4.64, added new table hwXponPortJumboEnableTable."
REVISION "201312310000Z"
DESCRIPTION "V4.63, modified the description of hwIpTrafficFixBandWidth, hwPortVlanPolicingVlanID and hwifEthernetOfflineReason."
REVISION "201312230000Z"
DESCRIPTION "V4.62, modified the description of hwifEthernetOfflineReason, hwPortStatisticsExcludeMulticastQueueEntry,
hwEthernetLoopbackTestResult and hwInfinibandEntry."
REVISION "201311250000Z"
DESCRIPTION "V4.61, added leaf node hwEthernetPortAggCfgChangeTrap for trap of hwEthernetCommonTraps."
REVISION "201311200000Z"
DESCRIPTION "V4.60, added leaf node hwEthernetPortCfgChangeTrap for trap of hwEthernetCommonTraps.
added new table hwPortStatisticsExcludeMulticastQueueTable."
REVISION "201310180000Z"
DESCRIPTION "V4.59, added new node hwifEthernetOfflineReason."
REVISION "201310080000Z"
DESCRIPTION "V4.58, modified the description of hwIpTrafficCir and hwIpTrafficCbs and the value range of hwIpTrafficCbs.
modified the description of hwCosQueueDepthRateQue0, hwCosQueueDepthRateQue1, hwCosQueueDepthRateQue2, hwCosQueueDepthRateQue3,
hwCosQueueDepthRateQue4, hwCosQueueDepthRateQue5, hwCosQueueDepthRateQue6 and hwCosQueueDepthRateQue7 of hwCosQueueDepthRateTable.
modified the description of hwProfileCosQueueDepthRateQue0, hwProfileCosQueueDepthRateQue1, hwProfileCosQueueDepthRateQue2,
hwProfileCosQueueDepthRateQue3, hwProfileCosQueueDepthRateQue4, hwProfileCosQueueDepthRateQue5, hwProfileCosQueueDepthRateQue6
and hwProfileCosQueueDepthRateQue7 of hwQosPolicyProfileTable."
REVISION "201309170000Z"
DESCRIPTION "V4.57, added leaf nodes hwProfileCosQueueDepthRateQue0, hwProfileCosQueueDepthRateQue1, hwProfileCosQueueDepthRateQue2,
hwProfileCosQueueDepthRateQue3, hwProfileCosQueueDepthRateQue4, hwProfileCosQueueDepthRateQue5, hwProfileCosQueueDepthRateQue6,
and hwProfileCosQueueDepthRateQue7 of hwQosPolicyProfileTable."
REVISION "201308020000Z"
DESCRIPTION "V4.56, added leaf node hwIpdslamQryConditionOntId for trap of hwIpdslamDisplayLocationTrap.
added new leaf hwExtDefaultPortEfmOamAdminStatus.
added new table hwEarlyDropPriBaseMappingTable.
added new leaf hwExtSrvFlowStatPerSwitch of hwExtSrvFlowTable.
modified the description of hwExtSrvFlowPara4.
Modified the value range of hwCosPortOntId from -1..254 to -1..255.
modified the description of hwIpTrafficPir and hwIpTrafficPbs and the value range of hwIpTrafficCir."
REVISION "201307120000Z"
DESCRIPTION "V4.55, added new node hwBindBoardReplaceErrorTrap."
REVISION "201306280000Z"
DESCRIPTION "V4.54, added leaf node hwifEthernetLoopbackTest of hwEthernetTable.
added node hwEthernetLoopbackTestResult, hwEthernetLoopbackTestTxFrames, hwEthernetLoopbackTestRxFrames
and hwEthernetLoopbackTestPacketLossRatio of hwEthernetTrapVarBindOids indicated loopback test result.
added hwEthernetLoopbackTestTrap of hwEthernetCommonTraps for loopback test trap.
added hwInfinibandTable and hwInfinibandTraps for infiniband port."
REVISION "201305140000Z"
DESCRIPTION "V4.53, added new node hwMulticastQueuePriority.
added enumerated ipneighbourhardware(2) in hwResourceType leaf node.
added the definition of the trap nodes: hwIPNeighbourHardwareOverloadTrap, hwIPNeighbourHardwareOverloadRestoreTrap."
REVISION "201304270000Z"
DESCRIPTION "V4.52, modified the description of hwExtSrvFlowPara1, hwExtSrvFlowPara2, hwExtSrvFlowPara3, hwExtSrvFlowPara4."
REVISION "201304070000Z"
DESCRIPTION "V4.51, added leaf node hwIpTrafficFixBandWidth of hwIpTrafficParamTable.
added enumerated value by8021pList(6) in hwExtSrvFlowMultiServiceType leaf node and modified the description.
modified the description of hwExtSrvFlowMultiServiceUserPara.
added enumerated docsis(15) in hwExtSrvFlowParaType leaf node.
modified the description of hwExtSrvFlowPara4,hwExtSrvFlowPara5 and hwExtSrvFlowParaType."
REVISION "201302010000Z"
DESCRIPTION "V4.50, added new table hwQosPolicyProfileTable.
added new table hwPortBindQosPolicyProfileTable.
added enumerated value srcDstIp(6) and ipEnhance(7) in hwifAggregateModel leaf node.
added enumerated value colorWred(4) in hwEarlyDropModeSlot leaf node and modified the description."
REVISION "201301300000Z"
DESCRIPTION "V4.49, added leaf node hwEthStatsEfmErroredFrameEvents of hwEthHistoryStatsTable.
added leaf node hwEthStatsEfmErroredFrameSecondSummaryEvents of hwEthHistoryStatsTable.
added leaf node hwEthStatsEfmErroredFramePeriodEvents of hwEthHistoryStatsTable."
REVISION "201212310000Z"
DESCRIPTION "V4.48, added leaf node hwQueueStatisticsPassedBytes of hwQueueStatisticsstateTable.
modified the type of leaf node hwVlanIsolateState from Integer32 to INTEGER."
REVISION "201212250000Z"
DESCRIPTION "V4.47, added leaf node hwifEthernetPortTypeAutoSensing to hwEthernetTable."
REVISION "201212120000Z"
DESCRIPTION "V4.46, added new node hwTrafficLimitOntMode."
REVISION "201212071616Z"
DESCRIPTION "V4.45, added leaf node hwifEthernetPortType to hwEthernetTable."
REVISION "201212060000Z"
DESCRIPTION "V4.44, added new table hwBoardSpeedModeTable."
REVISION "201211280000Z"
DESCRIPTION "V4.43, added new table hwResourceOverloadAwareTable.
added the definition of the trap nodes: hwMacOverloadTrap, hwMacOverloadRestoreTrap.
added leaf node hwResourceOverloadAwareCurValue to indicate the current resource occupancy.
added new table hwCarThresholdProfileTable.
added leaf node hwIpTrafficCarThresholdProfileIndex of hwIpTrafficParamTable."
REVISION "201211040000Z"
DESCRIPTION "V4.42, modified the description of hwIpdslamBindIpv6PrefixLength.
added node hwIpdslamBindIpMaskLength for binding IPv4 subnet.
modified the default value in the description of MIB nodes: hwDscpListMapToPriority2,hwDscpListMapToPriority3,hwDscpListMapToPriority4,
hwDscpListMapToPriority5,hwDscpListMapToPriority6,hwDscpListMapToPriority7.
modified the description of hwifAggregatePortName,hwAggregateStatisticsTable and hwAggregateStatisticsEntry."
REVISION "201210150000Z"
DESCRIPTION "V4.41, added leaf node hwFlowFluxSourceUpBytes of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxSourceUpPackets of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxSourceUpDiscardPackets of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxSourceDownBytes of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxSourceDownPackets of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxSourceDownDiscardPackets of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxDestinationUpBytes of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxDestinationUpPackets of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxDestinationUpDiscardPackets of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxDestinationDownBytes of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxDestinationDownPackets of hwFlowFluxStatisticTable.
added leaf node hwFlowFluxDestinationDownDiscardPackets of hwFlowFluxStatisticTable."
REVISION "201208030000Z"
DESCRIPTION "V4.40, modified the syntax and description of hwSrvAttrChangeType.
modified the value range of hwIpdslamConnectIndex, hwCarGroupSrvFlowIndex, hwExtSrvFlowIndexNext, hwExtSrvFlowIndex,
hwExtSrvFlowBundleIndex, hwFlowID, hwFlowIndex, hwSrvFlowBundleIndex, hwSrvFlowBundleQueryIndex, hwSrvFlowIndex, hwStaticMacFlowID,
and hwIpdslamQryConditionFlowBundleIndex.
modified enumerated value invalid(-1) in hwExtSrvFlowSimulationServiceType leaf node and modified the description."
REVISION "201206280000Z"
DESCRIPTION "V4.39, modified the description of hwEthStatsRxDropEvents."
REVISION "201205250000Z"
DESCRIPTION "V4.38, added new table hwSrvPortExtStatTable."
REVISION "201205030000Z"
DESCRIPTION "V4.37, added leaf node hwTrafficTablePriorityMappingMode for boards which support either TOS to 802.1p or DSCP to 802.1p
to determine which mode to use.
added leaf node hwMacAddressHashConfilictDetect to indicates the switch for MAC hash detect.
added enumerated value invalid(-1) in hwExtSrvFlowSimulationServiceType leaf node and modified the description.
added hwE2ECcTable."
REVISION "201202270000Z"
DESCRIPTION "V4.36, modified the syntax and description of hwEthStatsAlarmProfIndex."
REVISION "201202220000Z"
DESCRIPTION "V4.35, added leaf node hwEthernetLineAlarmSuppressInitial to indicate the switch status of suppressing alarm in initial state."
REVISION "201202200000Z"
DESCRIPTION "V4.34, modified description of some leaves of hwIpdslamConnectTable, hwIpTrafficParamTable, hwExtSrvFlowTable, hwEthernetTable, hwifAggregateTable,
hwCosPortTrafficTable, hwCosWREDThresholdTable, hwPbitsToPbitsMappingTable, hwQueueStatisticsstateTable, hwWREDTable,
hwQueueWREDTable, hwCtpEthAttributeCfgTable, hwExtProtocolForwardingPolicyTable,hwPortPermitForwardTable.
modified the description of leaf node hwCosQueueMappingMask.
modified the description of leaf node hwCosRemarkMask."
REVISION "201202150000Z"
DESCRIPTION "V4.33, modified the description of hwifEthernetAutoTxPowerOffDetectTime.
modified the description of some leaves of hwEthHistoryStatsTable."
REVISION "201202140000Z"
DESCRIPTION "V4.32, added enumerated value ge10(3) in hwPortSpeedType leaf node and modified the description,
added enumerated value s2500M(2500) in hwifEthernetSpeed leaf node and modified the description,"
REVISION "201201040000Z"
DESCRIPTION "V4.31, added table hwEthHistoryStatsAlarmProfTable.
added the definition of the trap node: hwEthPerformanceStatisOutOfRangeAlarmTrap,
hwEthPerformanceStatisRestoreAlarmTrap,hwEthPerformanceStatisOutOfRangeWarningTrap,hwEthPerformanceStatisRestoreWarningTrap.
added the fowllowing leaf nodes to hwEthernetTable:
hwEthBind15minAlarmTableIndex, to indicate the 15-min alarm profile bound to port,
hwEthBind15minWarningTableIndex to indicate the 15-min warning profile bound to port,
hwEthBind24hourAlarmTableIndex to indicate the 24-hour alarm profile bound to port,
hwEthBind24hourWarningTableIndex to indicate the 24-hour warning profile bound to port.
add the fowllowing leaf nodes to hwEthHistoryStatsTable:
hwEthStatsStartTime, hwEthStatsValidNumber, hwEthStatsInvalidNumber, hwEthStatsStatusChangeTimes,
hwEthStatsRxUnicastPkts, hwEthStatsTxUnicastPkts, hwEthStatsRxAlignErrors, hwEthStatsTxCollisionPkts,
hwEthStatsTxSingleCollisionPkts, hwEthStatsTxMultipleCollisionPkts, hwEthStatsDiscardedUndersizedPkts,
hwEthStatsTxUnderSizedPkts, hwEthStatsTxFragmentsPkts, hwEthStatsTxJabbers, hwEthStatsTxOverSizedPkts,
hwEthStatsTx64OctetsPkts, hwEthStatsTx65to127OctetsPkts, hwEthStatsTx128to255OctetsPkts, hwEthStatsTx256to511OctetsPkts,
hwEthStatsTx512to1023OctetsPkts, hwEthStatsTx1024to1518OctetsPkts, hwEthStatsTxErrorPkts, hwEthStatsRxErrorPkts,
hwEthStatsTxDropPkts, hwEthStatsTxCRCErrorPkts.
added leaf node hwAggStatsClear to clear aggregate port statistics information in hwAggregateStatisticsTable.
"
REVISION "201112190000Z"
DESCRIPTION "V4.30, added hwPortPermitForwardTable.
added leaf node hwExtPermitForwardIfIdex of hwPortPermitForwardTable.
added leaf node hwExtPermitForwardSecondIndex of hwPortPermitForwardTable.
added leaf node hwExtCfmPermitForwarding of hwPortPermitForwardTable."
REVISION "201111270000Z"
DESCRIPTION "V4.29, added hwXponQueueShapingTable and hwEthQueueShapingTable.
modified the object's name of hwQueueGroupShapingTable.
modified the object's name of hwQueueGroupShapingEntry.
modified the object's name of hwQueueGroupSchedMode.
modified the object's name of hwQueueGroupShapingInboundTrafficIndex.
modified the object's name of hwQueueGroupShapingOutboundTrafficIndex.
modified the object's name of hwQueueGroupShapingTrafficRowStatus."
REVISION "201111240000Z"
DESCRIPTION "V4.28, added leaf node hwL2MacAgingMode to indicate MAC address aging mode.
added the table of hwCosGroupTblTable.
added the table of hwCarPortCosGroupTable.
added leaf node hwStaticMacPwIndex of hwStaticMacTable to indicate setting Static MAC address on PW.
added leaf node hwIpdslamQryConditionPwIndex for trap of hwIpdslamDisplayLocationTrap.
added leaf node hwCosPortCosGroupTableIndex of hwCosPortTrafficTable to indicate the index of the CoS-group table bound to the GEM port.
modified the value range of hwCosPortTrafficCos.
"
REVISION "201111170000Z"
DESCRIPTION "V4.27, added leaf node hwifEthernetAutoTxPowerOffSwitch to indicate the switch of TX auto poweroff.
added leaf node hwifEthernetAutoTxPowerOffDetectTime to indicate LOS time of TX auto poweroff.
added leaf node hwifEthernetTxPowerState to indicate the TX status."
REVISION "201111090000Z"
DESCRIPTION "V4.26, modified the description of hwMaxMacLearn."
REVISION "201110190000Z"
DESCRIPTION "V4.25, added the trap of hwSrvFlowBatModifyInfoTrap for batch modifying the service ports.
added the following leaf nodes for the trap of hwSrvFlowBatModifyInfoTrap.
added leaf node hwSrvFlowBatOperType to indicate the batch operation type of the service port.
added leaf node hwSrvFlowBatOperPara to indicate the value of the service port parameter.
added leaf node hwSrvFlowBatModiyNum to indicate the number of the service ports.
added leaf node hwSrvFlowBatFlowIndexList to indicate the the service port index list.
"
REVISION "201110050000Z"
DESCRIPTION "V4.24, modified the object's name of hwOpticsTxPowerOutOfRangeAlarmTrap and hwOpticsTxPowerRestoreAlarmTrap."
REVISION "201109300000Z"
DESCRIPTION "V4.23, added enumerated value off(5) in hwEarlyDropModeSlot leaf node, and added the description of hwEarlyDropModeSlot.
added leaf node hwDownMcTrafficPolicy to indicate the traffic policy of downstream multicast packets."
REVISION "201109260000Z"
DESCRIPTION "V4.22, added leaf node hwEthernetLineAlarmRecoverOnShutdown to indicate the status of alarm recovering."
REVISION "201109200000Z"
DESCRIPTION "V4.21, modified the syntax of hwQueueStatisticsPassedNumber and hwQueueStatisticsDroppedNumber.
modified the value range of hwDscpToPbitsMappingIndex.
modified the description of hwExtSrvFlowPara5 and hwExtSrvFlowParaType."
REVISION "201108160000Z"
DESCRIPTION "V4.20, imported the following reference nodes from HUAWEI-ETHERNET-OPTICMODULE-MIB:
hwOpticsTemperatureUpperThresholdValue,
hwOpticsTemperatureLowerThresholdValue,
hwOpticsVoltageUpperThresholdValue,
hwOpticsVoltageLowerThresholdValue,
hwOpticsSupplyVoltage,
hwOpticsCurrentUpperThresholdValue,
hwOpticsCurrentLowerThresholdValue,
hwOpticsTxBiasCurrent."
REVISION "201108090000Z"
DESCRIPTION "V4.19, added enumerated value mplsLabel(5) in hwifAggregateModel leaf node,
and added the description of hwifAggregateModel."
REVISION "201107250000Z"
DESCRIPTION "V4.18, added hwCosQueueDepthRateSlotTable, hwEarlyDropModeSlotTable and hwEarlyDropColorBasedYellowThresholdTable.
added enumerated value IPv4oE(0) in hwExtSrvFlowMultiServiceUserPara.
modified the description of hwExtSrvFlowPara5.
added enumerated value xponEndToEnd(14) for leaf node hwExtSrvFlowParaType.
modified the description of the leaf node hwExtSrvFlowPara1,hwExtSrvFlowPara2, hwExtSrvFlowPara3,hwExtSrvFlowPara4 and hwExtSrvFlowPara5,
indicates how to use the enumerated value of the leaf node hwExtSrvFlowParaType."
REVISION "201107200000Z"
DESCRIPTION "V4.17, added the following leaf node for trap of hwSrvAttrChangedInfoTrap: hwExtSrvFlowPara5.
added leaf node hwNNIMacLearningPriority to indicate the MAC learning priority of the network side in the mainboard.
added leaf node hwUNIMacLearningPriority to indicate the MAC learning priority of the user side in the mainboard.
"
REVISION "201107050000Z"
DESCRIPTION "V4.16, added the definition of the following trap nodes:
hwOpticsTemperatureOutOfRangeAlarmTrap,
hwOpticsTemperatureRestoreAlarmTrap,
hwOpticsVoltageOutOfRangeAlarmTrap,
hwOpticsVoltageRestoreAlarmTrap,
hwOpticsCurrentOutOfRangeAlarmTrap,
hwOpticsCurrentRestoreAlarmTrap."
REVISION "201106170000Z"
DESCRIPTION "V4.15, modified the description of the nodes: hwCosPortOntId."
REVISION "201105180000Z"
DESCRIPTION "V4.14, modified the description of the nodes: hwLeftBrdPrimaryStatus, hwLeftBrdSecondaryStatus,
hwRightBrdPrimaryStatus, hwRightBrdSecondaryStatus."
REVISION "201105170000Z"
DESCRIPTION "V4.13, added enumerated value ont(4) in hwFlowBridgePortType leaf node,
and added the description of hwFlowBridgePortType.
"
REVISION "201104270000Z"
DESCRIPTION "V4.12, added the following leaf nodes for trap of hwSrvAttrChangedInfoTrap:
hwExtSrvFlowTagTransform,
hwExtSrvFlowAdminStatus,
hwExtSrvFlowTransmitTrafficDescrIndex,
hwExtSrvFlowReceiveTrafficDescrIndex,
hwExtSrvFlowInboundTrafficTableName,
hwExtSrvFlowOutboundTrafficTableName,
hwExtSrvFlowNNIInnerVlanId,
hwExtSrvFlowNNIInnerPriority,
hwIpdslamConnectMaxMacLearn,
hwExtSrvFlowDescInfo,
hwExtSrvFlowRemoteDescInfo.
"
REVISION "201103290000Z"
DESCRIPTION "V4.11, modified the name of hwVlanId in hwMacToVlanEntry to hwMacToVlanId."
REVISION "201103130000Z"
DESCRIPTION "V4.10, added leaf node hwIpdslamBindIpAddressType to indicate the IP type bound to a flow.
Added leaf node hwIpdslamBindIpv6Address to indicate the IPv6 address bound to a flow.
Added leaf node hwIpdslamBindIpv6PrefixLength to indicate the prefix length of IPv6 address bound to a flow.
Added hwBoardMacLearningControlTable to set or get the MAC learning switch of the ETH board.
"
REVISION "201103030000Z"
DESCRIPTION "V4.09, added service type detect funtion for HG autofind."
REVISION "201102180000Z"
DESCRIPTION "V4.08, added the definition of the trap nodes: hwAlarmEthPowerDyingGaspFault, hwAlarmEthPowerDyingGaspRecover."
REVISION "201102090000Z"
DESCRIPTION "V4.07, added hwIpTrafficColorPolicy as an object of hwIpTrafficParamChangeTrap.
Changed the value range of hwAggStatsIndex."
REVISION "201101170000Z"
DESCRIPTION "V4.06, changed the value range of hwifAggregatePort, with the value invalid(-1) added.
Changed the value range of hwAlarmUpstreamEthernetPortConnectRecover, with the value hwPortDesc deleted."
REVISION "201101130000Z"
DESCRIPTION "V4.05, added enumerated value invalid(-1) in hwBoardTrafficModeType leaf node."
REVISION "201101120000Z"
DESCRIPTION "V4.04, added the definition of the trap nodes: hwAlarmEthernetPortAdminActivate, hwAlarmEthernetPortAdminDeActivate."
REVISION "201101100000Z"
DESCRIPTION "V4.03, added enumerated value ingressOuter802dot1p(4) in hwIpTrafficPriorityPolicy leaf node."
REVISION "201012020000Z"
DESCRIPTION "V4.02, added leaf nodes hwFlowFluxUpMCCells, hwFlowFluxUpMCPackets, hwFlowFluxDownMCCells and hwFlowFluxDownMCPackets."
REVISION "201011200000Z"
DESCRIPTION "V4.01, added leaf node hwIpTrafficColorPolicy for support setting early drop threshold with Td.
Added table node hwCosRemarkMask for describing the mapping between CoS and remarked CoS.
Added table node hwTagTransformTable for indicating the cability of the tag transformation.
Added enumerated value eocCnuEth(13) in hwExtSrvFlowParaType leaf node.
Added hwFlowIndexQueryForPPPoESmltTable.
Modified the description of tables.
Modified the MAX-ACCESS of hwBindBrdFSIndex from read-only to not-accessible.
Modified the description of hwExtSrvFlowMultiServiceUserPara, indicates how to use IPv6oE Flow Para.
"
REVISION "201009030000Z"
DESCRIPTION "V4.00, modified the MAX-ACCESS of hwVlanLoopIndex from read-only to not-accessible, and modified the description of hwVlanLoopIndex.
Modified the MAX-ACCESS of hwVlanLoopDstInnerVlanId and hwVlanLoopTimeout from read-write to read-only.
Corrected the grammar mistake in the description of hwVlanLoopTable.
"
REVISION "201008260000Z"
DESCRIPTION "V3.99, modified parameter error hwPortIndex to hwSlotIndex for hwAlarmSoftwareVersionNotSame in MIB file.
Added the description for hwBindResult and hwBindOperateFlag.
Modified the description of hwSrvAttrChangeType, and its type is changed from INTEGER to BITS.
"
REVISION "201008160000Z"
DESCRIPTION "V3.98, added hwSrvFlowBundleChangedOperType, hwSrvFlowBundleChangedBundleStr,
hwSrvFlowBundleChangedBundleType, hwSrvFlowBundleTrap.
Append enumerable values for hwExtSrvFlowParaType and modify the description of hwExtSrvFlowPara5."
REVISION "201008120000Z"
DESCRIPTION "V3.97, modified the description of hwPortStateChangeInfoTrap.
Modified parameter type of hwPortSpeedType. "
REVISION "201007070000Z"
DESCRIPTION "V3.96, defined trap node hwPortAutounloopSwitchInfoTrap so that a trap message is generated
when the loopback on a port is canceled automatically.
Added leaf nodes hwLeftBrdPrimaryStatus, hwLeftBrdSecondaryStatus, hwRightBrdPrimaryStatus,
hwRightBrdSecondaryStatus for getting the port North America state.
Added the definition of the trap nodes: hwAlarmEthPoePowerHighFault, hwAlarmEthPoePowerHighRecover, hwAlarmEthPoeCurrHighFault, hwAlarmEthPoeCurrHighRecover.
Added a scalar leaf hwSrvOperType to indicate the operation type of the traffic stream.
Added a scalar leaf hwSrvAttrChangeType to indicate the operation type of modifying the traffic stream attribute.
Added a trap leaf hwSrvAddInfoTrap to enable a trap to be sent when a traffic stream is set up.
Added a trap leaf hwSrvDelInfoTrap to enable a trap to be sent when a traffic stream is deleted.
Added a trap leaf hwSrvAttrChangedInfoTrap to enable a trap to be sent when the traffic stream attribute is modified.
Modified the description of MIB.
Modified the description.
Added an enumerated value for hwGlobalStatisticOper.
Modified parameter for hwPortChangeState.
"
REVISION "201006220000Z"
DESCRIPTION "V3.95, modified the name of ifindex in hwBoardBindEntry to hwBindBrdFSIndex.
Modified the name of hwBindBrdIndex in hwBoardBindEntry to hwBindBrdAnotherFSIndex.
Added enumerated value invalid(-1) in hwifAggregateOperType leaf node for syntax error.
Added the definition of the following trap nodes:
hwOpticsTxPowerOutOfRangeAlarmTrap,
hwOpticsTxPowerRestoreAlarmTrap,
hwOpticsRxPowerOutOfRangeAlarmTrap,
hwOpticsRxPowerRestoreAlarmTrap."
REVISION "201006200000Z"
DESCRIPTION "V3.94, modified syntax of hwIpdslamQryCondition.
Added hwIpTrafficParamChangeTrap.
Added hwExtSrvFlowOntPortType.
Modified the value range of hwCosPortGemIndex from -1~127 to -1~1023."
REVISION "201005260000Z"
DESCRIPTION "V3.93, modified the definition of the trap node hwPortStateChangeInfoTrap."
REVISION "201005200000Z"
DESCRIPTION "V3.92, added bind Trap, port speed type change and port state change Trap."
REVISION "201005110000Z"
DESCRIPTION "V3.91, added leaf node hwAggStatsSpeed, hwAggStatsOutboundErrors in hwAggregateStatisticsTable."
REVISION "201005100000Z"
DESCRIPTION "V3.90, modified value range of hwIpTrafficCir, hwIpTrafficCbs, hwIpTrafficPir, hwIpTrafficPbs."
REVISION "201003230000Z"
DESCRIPTION "V3.89, modified hwDscpToPbitsMappingTable.
Added hwExtProtocolForwardingPolicyTable.
Added table hwIPPrecToPbitsMappingTable and hwPortCarModeTable.
Modified hwIpdslamDisplayLocationTrap."
REVISION "201003150000Z"
DESCRIPTION "V3.88, added table hwAggregateStatisticsTable."
REVISION "201003010000Z"
DESCRIPTION "V3.87, modified the syntax error."
REVISION "201002250000Z"
DESCRIPTION "V3.86, modified description of hwFlowMulitiServicePara."
REVISION "201002230000Z"
DESCRIPTION "V3.85, added the definition of the trap nodes
hwBiuPortStatusChangeInfoTrap"
REVISION "201001280000Z"
DESCRIPTION "V3.83, added the definition of the trap nodes
hwPgGroupLoadBalanceStateChangeTrap"
REVISION "201001280000Z"
DESCRIPTION "V3.82, added hwXdslEtherStatsTable."
REVISION "201001260000Z"
DESCRIPTION "V3.81, deleted hwColorWREDThresholdTable.
add hwExtDefaultPolicy."
REVISION "201001120000Z"
DESCRIPTION "V3.80, added the definition of the trap nodes
hwAlarmEthernetPortTransceiverTypeChange
hwAlarmSoftwareVersionNotSame
hwAlarmUpstreamPortConnectfail
hwAlarmLOLOccurInBITSInputPort
hwAlarmEthernetPortStatusChanges
hwAlarmOpticalTransceiverAbsence
hwAlarmLOSOccurs
hwAlarmLinkBetweenStackPortsFails
hwAlarmUpstreamEthernetPortConnectRecover
hwAlarmOpticalPortTemperatureRecover
hwAlarmBITSInputRecover
hwAlarmEthernetPortLinkStatusChange
hwAlarmOpticalTransceiverRecover
hwAlarmOpticalPortRecoverFromLOS
hwAlarmLinkBetweenStackPortsRecover
"
REVISION "200912260000Z"
DESCRIPTION "V3.79, changed SMI to SMIv2 standard."
REVISION "200912240000Z"
DESCRIPTION "V3.78, changed the value range of hwCosQueueSchedMode, with the value WFQ(3) added."
REVISION "200912200000Z"
DESCRIPTION "V3.77, added hwDscpToPbitsMappingTable."
REVISION "200911200000Z"
DESCRIPTION "V3.73, added leaf node hwifAggregateMaxLinkNum in hwifAggregateTable for specifying the maximum number of aggregated links."
REVISION "200910270000Z"
DESCRIPTION "V3.71, added table node hwCarGroupTable and hwCarGroupSrvFlowTable for supporting the HQOS policy of Flow Group level 2 CAR"
REVISION "200904070000Z"
DESCRIPTION "V3.58, added table node hwBoardvlanrangestateTable for configuring whether the service
board supports to create VLAN RANGE service-port "
REVISION "200812300000Z"
DESCRIPTION "V3.50, added table node hwBoardBindTable for supporting binding function between board aggregate."
::= { huaweiMgmt 14 }
-- Textual conventions
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
hwL2IfMibObject OBJECT IDENTIFIER ::= { hwEthernetPort 1 }
hwSlotPortMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes L2 global interface objects.
"
::= { hwL2IfMibObject 1 }
hwSwitchPortMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max ports that this switch includes
"
::= { hwL2IfMibObject 2 }
hwMacExpire OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the aging time of a dynamic MAC address.
Range: 1000-100000000.
Unit: cent seconds.
When this leaf is set to 0, it indicates that the MAC address does not age.
Default: 30000 cent seconds, that is, 300 seconds.
"
::= { hwL2IfMibObject 3 }
hwEthernetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEthernetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the line parameter configuration table of an ETH port.
It is used for setting the rate, duplex, auto-negotiation, MDI,
traffic control, Combo mode of an Ethernet port.
The index of this table is ifIndex.
"
::= { hwL2IfMibObject 4 }
hwEthernetEntry OBJECT-TYPE
SYNTAX HwEthernetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the line parameter configuration table of an ETH port.
It is used for setting the rate, duplex, auto-negotiation, MDI,
traffic control, Combo mode of an Ethernet port.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwEthernetTable 1 }
HwEthernetEntry ::=
SEQUENCE {
hwifEthernetDuplex
INTEGER,
hwifEthernetMTU
Integer32,
hwifEthernetSpeed
INTEGER,
hwifEthernetLoopback
INTEGER,
hwifEthernetMdi
INTEGER,
hwMaxMacLearn
Integer32,
hwifMacAddressLearn
INTEGER,
hwifTag
INTEGER,
hwifEthernetNegotiate
TruthValue,
hwifEthernetPeerNegotiate
TruthValue,
hwifEthernetPauseFrameTag
INTEGER,
hwifEthernetPauseFrameSending
TruthValue,
hwifEthernetVlanDefault
Integer32,
hwifEthernetOnlineState
TruthValue,
hwifEthernetLineSelfAdaptMode
TruthValue,
hwifEthernetTrafficBroadcast
Integer32,
hwifEthernetTrafficMulticast
Integer32,
hwifEthernetTrafficUnknowncast
Integer32,
hwifEthernetJumboEnable
INTEGER,
hwifPortDefPriority
Integer32,
hwifEthernetComboWorkMode
INTEGER,
hwifEthernetLineTest
INTEGER,
hwifEthernetAutoTxPowerOffSwitch
INTEGER,
hwifEthernetAutoTxPowerOffDetectTime
Integer32,
hwifEthernetTxPowerState
INTEGER,
hwEthBind15minAlarmTableIndex
Integer32,
hwEthBind15minWarningTableIndex
Integer32,
hwEthBind24hourAlarmTableIndex
Integer32,
hwEthBind24hourWarningTableIndex
Integer32,
hwifEthernetPortType
INTEGER,
hwifEthernetPortTypeAutoSensing
INTEGER,
hwifEthernetLoopbackTest
INTEGER,
hwifEthernetOfflineReason
INTEGER,
hwifEthernetTxPowerResumeDetect
INTEGER,
hwifEthernetTxPowerDetectInterval
Integer32,
hwifEthernetTxPowerResumeDuration
Integer32,
hwifEthernetTxPowerManualResume
INTEGER,
hwifEthernetOpticModuleState
Integer32,
hwifEthernetLinkflapping
Integer32,
hwifEthernetOfflineTxOffTime
Integer32,
hwifEthernetTrafficRateBroadcast
Integer32,
hwifEthernetTrafficRateMulticast
Integer32,
hwifEthernetTrafficRateUnknowncast
Integer32,
hwEthernetLightTestTimeduration
Integer32,
hwEthernetLightTestTestStatus
INTEGER,
hwEthernetLightTestFinshStatus
INTEGER
}
hwifEthernetDuplex OBJECT-TYPE
SYNTAX INTEGER
{
full(1),
half(2),
auto(3),
autoFull(4),
autoHalf(5),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet port duplex mode.
Options:
1. full(1) -indicates that at one moment, the port can be sending packets and receiving packets
2. half(2) -indicates that at one moment, the port can be sending packets or receiving packets
3. auto(3) -indicates that the port duplex mode is automatic
4. autoFull(4) -indicates that the port duplex mode is automatic full
5. autoHalf(5) -indicates that the port duplex mode is automatic half
6. invalid(-1) -invalid value
Currently only two duplex modes are supported: full(1) and half(2).
When auto-negotiation is disabled on a port, the duplex mode can be set.
"
::= { hwEthernetEntry 1 }
hwifEthernetMTU OBJECT-TYPE
SYNTAX Integer32 (-1..0|1519..9280)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for setting the MTU of a ETH port
0 indicates to restore the default value.
-1 indicates the value is invalid.
Range: -1-0, 1519-9280
"
::= { hwEthernetEntry 2 }
hwifEthernetSpeed OBJECT-TYPE
SYNTAX INTEGER
{
auto(0),
s10M(10),
s100M(100),
s1000M(1000),
s2500M(2500),
s10000M(10000),
s100000M(100000),
autoS10M(11),
autoS100M(101),
autoS1000M(1001),
autoS10000M(10001),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet port rate.
Options:
1. auto(0) -Ethernet port rate 0
2. s10M(10) -Ethernet port rate forced 10M
3. s100M(100) -Ethernet port rate forced 100M
4. s1000M(1000) -Ethernet port rate forced 1000M
5. s2500M(2500) -Ethernet port rate forced 2500M
6. s10000M(10000) -Ethernet port rate forced 10000M
7. s100000M(100000) -Ethernet port rate forced 100000M
8. autoS10M(11) -Ethernet port rate auto 10M
9. autoS100M(101) -Ethernet port rate auto 100M
10. autoS1000M(1001) -Ethernet port rate auto 1000M
11. autoS10000M(10001) -Ethernet port rate auto 10000M
12. invalid(-1) -invalid value
The basic principle for configuring the Ethernet port rate is that the rates of the corresponding
ports on two interconnected devices must be the same, thus preventing communication failure.
The FE optical port supports only the port rate of 100 Mbit/s.
The GE optical port supports the port rates of 1000Mbit/s and 2500 Mbit/s.
The 10GE optical port supports only the port rate of 10000 Mbit/s.
The 100GE optical port supports only the port rate of 100000 Mbit/s.
The GE electrical ports support the port rates of 10 Mbit/s, 100 Mbit/s, and 1000 Mbit/s and auto-negotiation.
Only when the auto-negotiation is disabled on a port, rate configuration can be set.
"
::= { hwEthernetEntry 3 }
hwifEthernetLoopback OBJECT-TYPE
SYNTAX INTEGER
{
noloopback(1),
internalloopback(2),
externalloopback(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet port loop back mode.
Options:
1. noloopback(1) -cancel loopback
2. internalloopback(2) -local loopback
3. externalloopback(3) -remote loopback
Ports only on the H801SPUA board support the loopback configuration.
"
::= { hwEthernetEntry 4 }
hwifEthernetMdi OBJECT-TYPE
SYNTAX INTEGER
{
mdiII(1),
mdiX(2),
mdiAuto(3),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet port cable type.
Options:
1. mdiII(1) -direct connection cable
2. mdiX(2) -cross-over cable
3. mdiAuto(3) -auto-sensing
4. invalid(-1) -invalid value
After the network cable auto-sensing mode of an Ethernet port is set successfully, the type of
the network cable connecting to the port must match the configured network cable auto-sensing mode.
The Ethernet optical port does not support the network cable auto-sensing mode.
If the Ethernet electrical port works in forced mode, the network cable type of the port cannot be
configured to the auto-sensing mode. If the Ethernet electrical port works in auto-negotiation mode,
the network cable type of the port cannot be configured to using the straight through cable or using
the crossover cable.
"
::= { hwEthernetEntry 5 }
hwMaxMacLearn OBJECT-TYPE
SYNTAX Integer32 (0..600 | 65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max MAC learned by the Ethernet port.
The invalid value is 65535.
"
::= { hwEthernetEntry 6 }
hwifMacAddressLearn OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status indicates if the interface is allowed to learn MAC address.
Options:
1. enabled(1) -Indicates the interface can learn MAC address.
2. disabled(2) -Indicates the interface can't learn MAC address.
Enable the self-learning of the MAC address at the interface
"
::= { hwEthernetEntry 7 }
hwifTag OBJECT-TYPE
SYNTAX INTEGER
{
tag(1),
untag(2),
multi(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet interface tag.
Options:
1. tag(1) -This value is not supported.
2. untag(2) -This value is not supported.
3. multi(3) -This value is not supported.
"
::= { hwEthernetEntry 8 }
hwifEthernetNegotiate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet port negotiation mode.
Options:
1. true(1) -auto-negotiation mode of an Ethernet port is enabled, Ethernet port automatically
negotiates the port rate and duplex mode with the interconnected Ethernet port
2. false(2) -auto-negotiation mode of an Ethernet port is disabledthe port works at the rate
and in the duplex mode that are set in forced mode
"
::= { hwEthernetEntry 9 }
hwifEthernetPeerNegotiate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ethernet peer port auto-negotiation node (which is needed by MA5100 V2R1 product,
and can be selected by other products of the fixed network depending on the practice.)
"
::= { hwEthernetEntry 10 }
hwifEthernetPauseFrameTag OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2),
rxpause(3),
txpause(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the Ethernet port supports Pause frame flow control.
Options:
1. on(1) -support Tx Pause and Rx Pause
2. off(2) -not support
3. rxpause(3) -support Rx Pause not support Tx Pause
4. txpause(4) -support Tx Pause not support Rx Pause
When traffic of an Ethernet port is heavy, use this leaf to control traffic to prevent
network congestion, which may cause the loss of data packets. After traffic control of
an Ethernet port is enabled, when traffic of EE port exceeds 1 Gbit/s and traffic of FE
port exceeds 100 Mbit/s, the device sends PAUSE frames to inform the remote PC to reduce
traffic so as to reduce the packet loss rate.
The control function requires the supports from both the MA5600T and the peer device.
If the peer device supports traffic control, enable the traffic control of the MA5600T;
if the peer device does not support the traffic control, disable the traffic control of
the MA5600T.
"
::= { hwEthernetEntry 11 }
hwifEthernetPauseFrameSending OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ethernet pause frame sending tag (Notes: only for Huawei product of Ma5100)
Whether the network interface is sending Pause frame (which is needed by
MA5100 V2R1 product, and can be selected by other products of the fixed network
depending on the practice.)
Options:
1. true(1) -the network interface is sending Pause frame
2. false(2) -the network interface does not send Pause frame
"
::= { hwEthernetEntry 12 }
hwifEthernetVlanDefault OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the native VLAN of an Ethernet port.
When you need to set the packets of the upstream Ethernet
port with the VLAN tag, operate this leaf. After the native
VLAN of the Ethernet port is configured successfully,
If the VLAN ID of the Ethernet port is the same as that
of the native VLAN, the packets of the upstream Ethernet
port do not contain the VLAN tag, that is, the packets are untagged.
If the VLAN ID of the Ethernet port is not the same as that
of the native VLAN, the packets of the upstream Ethernet
port contain the VLAN tag.
Before specifying the native VLAN of a port, make sure that the port
has been added to the VLAN.
This does not work:
when you set the native VLAN on a sub-port of an aggregated port.
When you set the native on an aggregated master port,
the configuration of all physical ports within the aggregated group is changed.
Range: 1-4093
Default: 1
"
::= { hwEthernetEntry 13 }
hwifEthernetOnlineState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ethernet port online status (Notes: only for Huawei product of Ma5100).
Whether the network interface is online (which is needed by MA5100 V2R1
product, and can be selected by other products of the fixed network depending on the practice).
Options:
1. true(1) -the network interface is online
2. false(2) -the network interface is offline
"
::= { hwEthernetEntry 14 }
hwifEthernetLineSelfAdaptMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Connecting adaptatively tag,default false.
Options:
1. true(1) -adapting by itself
2. false(2) -adapting by manual
The self-adaptation switch:
In the case of true, the self-adaptation is enabled, and the device will be self-adaptive,
cross-over cable or not.
In the case of false, the self-adaptation is disabled, and the device will not be self-adaptive,
thus the network cable should be connected by the user.
"
::= { hwEthernetEntry 15 }
hwifEthernetTrafficBroadcast OBJECT-TYPE
SYNTAX Integer32 (-1..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the broadcast traffic suppression on an Ethernet port.
Range: -1,0-13
13: indicates full-suppression of traffic, and 0 indicates no traffic suppression.
-1: indicates invalid value.
The suppression levels and corresponding bandwidth ranges are listed as follows:
---------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
---------------------------------------------------------------
0 Not suppressed Not suppressed Not suppressed
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 0 0 0
---------------------------------------------------------------
Default: 7
"
::= { hwEthernetEntry 16 }
hwifEthernetTrafficMulticast OBJECT-TYPE
SYNTAX Integer32 (-1..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unknown multicast traffic suppression on an Ethernet port.
Range: -1,0-13
13: indicates full-suppression of traffic, and 0 indicates no traffic suppression.
-1: indicates invalid value.
The suppression levels and corresponding bandwidth ranges are listed as follows:
---------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
---------------------------------------------------------------
0 Not suppressed Not suppressed Not suppressed
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 0 0 0
---------------------------------------------------------------
Default: 7
"
::= { hwEthernetEntry 17 }
hwifEthernetTrafficUnknowncast OBJECT-TYPE
SYNTAX Integer32 (-1..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unknown unicast traffic suppression on an Ethernet port.
Range: -1,0-13
13: indicates full-suppression of traffic, and 0 indicates no traffic suppression.
-1: indicates invalid value.
The suppression levels and corresponding bandwidth ranges are listed as follows:
---------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
---------------------------------------------------------------
0 Not suppressed Not suppressed Not suppressed
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 0 0 0
---------------------------------------------------------------
Default: 7
"
::= { hwEthernetEntry 18 }
hwifEthernetJumboEnable OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable jumbo frames.
When the carriers' servers need to exchange a large amount of data with their devices,
operate this object to enable jumbo frames.
After the operation is executed successfully,
the corresponding port on the control board can transparently transmit the frames whose size is between 1519 bytes and 9280 bytes.
By default, the Ethernet port disable jumbo frames.
Options:
1. invalid(-1) -invalid
2. enabled(1) -enable the jumbo frames
3. disabled(2) -disabled the jumbo frames
"
::= { hwEthernetEntry 19 }
hwifPortDefPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port default 802.1p priority (Notes: Default value is 0.)
------------------------------------------------------------
F/ S/ P Port Priority
------------------------------------------------------------
0/ 3/ 0 3
0/ 3/ 1 4
0/ 3/ 2 5
0/ 3/ 3 6
0/ 3/ 4 7
0/ 3/ 5 5
0/ 3/ 6 4
0/ 3/ 7 3
------------------------------------------------------------
"
::= { hwEthernetEntry 20 }
hwifEthernetComboWorkMode OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
electric(1),
optic(2),
autoFiber(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Work mode information of combo port.
Options:
1. electric(1) -combo port works in electric mode
2. optic(2) -combo port works in optic mode
3. autoFiber(5) -combo port works in auto adapter mode
4. invalid(-1) -invalid
"
::= { hwEthernetEntry 21 }
hwifEthernetLineTest OBJECT-TYPE
SYNTAX INTEGER
{
test(1),
notSupport(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It used to test the line status.
Options:
1. test(1) -Test the line operation
2. notSupport(-1) -Indicates the board does not support this operation
"
::= { hwEthernetEntry 22 }
hwifEthernetAutoTxPowerOffSwitch OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch of Tx auto power off.
Options:
1. invalid(-1) -invalid value
2. enabled(1) -enable Tx auto poweroff
3. disabled(2) -disable Tx auto poweroff
Default: disable(2).
"
::= { hwEthernetEntry 23 }
hwifEthernetAutoTxPowerOffDetectTime OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..60)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the detecting LOS time of TX auto power off.
Set:
'1-60' means valid value to be set,
Get:
'-1' means invalid value,
Unit: minutes
"
::= { hwEthernetEntry 24 }
hwifEthernetTxPowerState OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the state of ethernet port Tx.
Options:
1. invalid(-1) -invalid value
2. on(1) -ethernet port Tx is on
3. off(2) -ethernet port Tx is off
"
::= { hwEthernetEntry 25 }
hwEthBind15minAlarmTableIndex OBJECT-TYPE
SYNTAX Integer32(-1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 15 minutes alarm profile index for the ethernet port.
Set:
'0' means to unbind 15 minutes alarm profile,
'1-16' means to bind 15 minutes alarm profile to the ethernet port
Get:
'-1' means operation not support,
'0' means the port has not bound 15 minutes alarm profile,
'1-16' means the 15 minutes alarm profile index for the ethernet port.
"
::= { hwEthernetEntry 26 }
hwEthBind15minWarningTableIndex OBJECT-TYPE
SYNTAX Integer32(-1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 15 minutes warning profile index for the ethernet port.
Set:
'0' means to unbind 15 minutes warning profile,
'1-16' means to bind 15 minutes warning profile to the ethernet port
Get:
'-1' means operation not support,
'0' means the port has not bound 15 minutes warning profile,
'1-16' means the 15 minutes warning profile index for the ethernet port.
"
::= { hwEthernetEntry 27 }
hwEthBind24hourAlarmTableIndex OBJECT-TYPE
SYNTAX Integer32(-1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 24 hours alarm profile index for the ethernet port.
Set:
'0' means to unbind 24 hours alarm profile,
'1-16' means to bind 24 hours alarm profile to the ethernet port
Get:
'-1' means operation not support,
'0' means the port has not bound 24 hours alarm profile,
'1-16' means the 24 hours alarm profile index for the ethernet port.
"
::= { hwEthernetEntry 28 }
hwEthBind24hourWarningTableIndex OBJECT-TYPE
SYNTAX Integer32(-1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 24 hours warning profile index for the ethernet port.
Set:
'0' means to unbind 24 hours warning profile,
'1-16' means to bind 24 hours warning profile to the ethernet port
Get:
'-1' means operation not support,
'0' means the port has not bound 24 hours warning profile,
'1-16' means the 24 hours warning profile index for the ethernet port.
"
::= { hwEthernetEntry 29 }
hwifEthernetPortType OBJECT-TYPE
SYNTAX INTEGER
{
fe(1),
ge(2),
xge(3),
onehundredge(4),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the ethernet port type.
Options:
1. fe(1) -Ethernet port type FE
2. ge(2) -Ethernet port type GE
3. xge(3) -Ethernet port type 10GE
4. onehundredge(4) -Ethernet port type 100GE
5. invalid(-1) -invalid value
Only FE and GE are supported currently.
"
::= { hwEthernetEntry 30 }
hwifEthernetPortTypeAutoSensing OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch for the port type auto-sensing.
When the switch is enabled, the port will working on GE or FE mode according to that of link partner.
Options:
1. enable(1) --enable the port type auto-sensing.
2. disable(2) --disable the port type auto-sensing.
3. invalid(-1) --invalid value.
"
::= { hwEthernetEntry 31 }
hwifEthernetLoopbackTest OBJECT-TYPE
SYNTAX INTEGER
{
test(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It used to start loopback test.
Options:
1. test(1) -Start loopback test.
"
::= { hwEthernetEntry 32 }
hwifEthernetOfflineReason OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
unknown(1),
boardabnormal(2),
opticalmoduleoffline(3),
los(4),
shutdownbyuser(5),
ringdetected(6),
ethoamtriggeredlinkdown(7),
dyinggasp(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the offline reason of ethernet port.
Options:
1. invalid(-1) -invalid value
2. unknown(1) -unknown
3. boardabnormal(2) -board abnormal
4. opticalmoduleoffline(3) -optical module offline
5. los(4) -LOS detected
6. shutdownbyuser(5) -port shuted down by user
7. ringdetected(6) -ring detected
8. ethoamtriggeredlinkdown(7) -ETHOAM triggered link down
9. dyinggasp(8) -peer end loss of power
"
::= { hwEthernetEntry 33 }
hwifEthernetTxPowerResumeDetect OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
manual(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch of Tx auto power resume detection.
Options:
1. invalid(-1) -invalid value
2. manual(1) -Tx power resume detection manually
3. auto(2) -Tx power resume detection automatically
Default: manual(1).
"
::= { hwEthernetEntry 34 }
hwifEthernetTxPowerDetectInterval OBJECT-TYPE
SYNTAX Integer32 (-1 | 100..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interval of Tx power pulse.
'100-300' means valid value,
'-1' means invalid value,
Unit: seconds
"
::= { hwEthernetEntry 35 }
hwifEthernetTxPowerResumeDuration OBJECT-TYPE
SYNTAX Integer32 (-1 | 100..3000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the duration of Tx power pulse.
'100-3000' means valid value,
'-1' means invalid value,
Unit: milliseconds
"
::= { hwEthernetEntry 36 }
hwifEthernetTxPowerManualResume OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
start(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operation of manual resumption.
Options:
1. invalid(-1) -invalid value
2. start(1) -start Tx power resumption
"
::= { hwEthernetEntry 37 }
hwifEthernetOpticModuleState OBJECT-TYPE
SYNTAX Integer32 (1..4 | 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the state of optical module.
Options:
1. normal(1)
2. absent(2)
3. abnormal(3)
4. mismatch(4)
'2147483647' means invalid value.
"
::= { hwEthernetEntry 38 }
hwifEthernetLinkflapping OBJECT-TYPE
SYNTAX Integer32 (-1..0|10..5000)
UNITS "millisecond"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for setting the link flapping time of a ETH port
0 indicates disable the ETH port link flapping.
10-5000 indicates enable ETH link flapping.
-1: indicates invalid value.
Range: -1 0, 10-5000ms,multiple of 10ms.
Default:0
"
::= { hwEthernetEntry 39 }
hwifEthernetOfflineTxOffTime OBJECT-TYPE
SYNTAX Integer32 (-1|0..1000)
UNITS "millisecond"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the the offline time on an Ethernet port.
Range: -1,0-1000
0-1000: indicates the offline time when link down.
0 means the offline time function is off.
-1: indicates invalid value.
Default: 0
"
::= { hwEthernetEntry 40 }
hwifEthernetTrafficRateBroadcast OBJECT-TYPE
SYNTAX Integer32 (-1..24414)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the broadcast traffic suppression on an Ethernet port.
Range: -1,0-24414
Unit: pps.
24414: indicates full-suppression of traffic, and 0 indicates no traffic suppression.
-1: indicates invalid value.
Default: -1.
"
::= { hwEthernetEntry 41 }
hwifEthernetTrafficRateMulticast OBJECT-TYPE
SYNTAX Integer32 (-1..24414)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unknown multicast traffic suppression on an Ethernet port.
Range: -1,0-24414
Unit: pps.
24414: indicates full-suppression of traffic, and 0 indicates no traffic suppression.
-1: indicates invalid value.
Default: -1.
"
::= { hwEthernetEntry 42 }
hwifEthernetTrafficRateUnknowncast OBJECT-TYPE
SYNTAX Integer32 (-1..24414)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unknown unicast traffic suppression on an Ethernet port.
Range: -1,0-24414
Unit: pps.
24414: indicates full-suppression of traffic, and 0 indicates no traffic suppression.
-1: indicates invalid value.
Default: -1.
"
::= { hwEthernetEntry 43 }
hwEthernetLightTestTimeduration OBJECT-TYPE
SYNTAX Integer32 (-1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the time duration of light test, 0s ~ 3600s,
0s means stopping the testing immidiately.
"
::= { hwEthernetEntry 44 }
hwEthernetLightTestTestStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the laser test status.
Options:
1. enable(1) - laser tx is enable
2. disable(2) - laser tx is disable
3. invalid(-1) - invalid value
Default:enable(1).
"
::= { hwEthernetEntry 45 }
hwEthernetLightTestFinshStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
original(3),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the laser status after the test is completed.
Options:
1. enable(1) - laser tx is enable
2. disable(2) - laser tx is disable
3. original(3) - returned to its original status
4. invalid(-1) - invalid value
Default:original(3)
"
::= { hwEthernetEntry 46 }
hwifVLANTrunkStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfVLANTrunkStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN trunk feature.
The index of this table is hwifVLANTrunkIndex.
"
::= { hwL2IfMibObject 5 }
hwifVLANTrunkStatusEntry OBJECT-TYPE
SYNTAX HwIfVLANTrunkStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN trunk feature.
The index of this entry is hwifVLANTrunkIndex.
"
INDEX { hwifVLANTrunkIndex }
::= { hwifVLANTrunkStatusTable 1 }
HwIfVLANTrunkStatusEntry ::=
SEQUENCE {
hwifVLANTrunkIndex
InterfaceIndex,
hwifVLANTrunkGvrpRegistration
INTEGER,
hwifVLANTrunkPassListLow
OCTET STRING,
hwifVLANTrunkPassListHigh
OCTET STRING,
hwifVLANTrunkAllowListLow
OCTET STRING,
hwifVLANTrunkAllowListHigh
OCTET STRING
}
hwifVLANTrunkIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan trunk index
interface index of VLANTrunk
"
::= { hwifVLANTrunkStatusEntry 1 }
hwifVLANTrunkGvrpRegistration OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
fixed(2),
forbidden(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"GVRP registration information.
Options:
1. normal(1) -This is the default configration. Allow create, register and unretiser vlans dynamiclly at this port.
2. fixed(2) -Allow create and register vlan manully at this port.
And prevent from unregistering vlans or registering known vlans of this port at another trunk port.
3. forbidden(3) -Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port.
"
::= { hwifVLANTrunkStatusEntry 2 }
hwifVLANTrunkPassListLow OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low vlan trunk pass list.total vlan includes 8*255= 2040 vlan ids
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.
The VLANs that actually pass the VLAN port (low 2040 VLANs (1-2040)), in the length of 255.
"
::= { hwifVLANTrunkStatusEntry 3 }
hwifVLANTrunkPassListHigh OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high vlan trunk pass list. The total vlan includes 8*255= 2040 vlan ids
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.
The VLANs that pass the VLAN port (1960 VLANs (2041-4000)), in the length of 245.
"
::= { hwifVLANTrunkStatusEntry 4 }
hwifVLANTrunkAllowListLow OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low interface of vlan .total interface includes 8*255= 2040 vlan ids
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.
The VLANs that are allowed to pass the VLAN port(2040 VLANs (1-2040)),in the length of 255.
"
::= { hwifVLANTrunkStatusEntry 5 }
hwifVLANTrunkAllowListHigh OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high inteface of vlan .total interface includes 8*255= 2040 vlan ids
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.
The VLANs allowed to pass the VLAN port (low 2040 VLANs (1-2040)), in length of 255.
"
::= { hwifVLANTrunkStatusEntry 6 }
hwSystemSwitchMode OBJECT-TYPE
SYNTAX INTEGER
{
standbyPortUp(1),
standbyPortDown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Options:
1. standbyPortUp(1) -Auto system switch mode (undo shutdown standby port)
2. standbyPortDown(2) -Manual system switch mode (shutdown standby port)
"
::= { hwL2IfMibObject 6 }
hwFabricMacLearning OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address learning switch of the LSW chip of the control board.
Options:
1. enable(1) -indicates that the MAC address learning switch is enabled
2. disable(2) -indicates that the MAC address learning switch is disabled
Default: enable(1)
"
::= { hwL2IfMibObject 7 }
hwUNIMacLearningPriority OBJECT-TYPE
SYNTAX Integer32(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC learning priority of the user side in the mainboard.
Range: 0-3
Default: 0
"
::= { hwL2IfMibObject 8 }
hwNNIMacLearningPriority OBJECT-TYPE
SYNTAX Integer32(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC learning priority of the network side in the mainboard.
Range: 0-3
Default: 3
"
::= { hwL2IfMibObject 9 }
hwL2MacAgingMode OBJECT-TYPE
SYNTAX INTEGER
{
bidirectional(1),
unidirectional(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address aging mode.
Options:
1. bidirectional(1) -indicates that the MAC address aging mode is bidirectional.
2. unidirectional(2) -indicates that the MAC address aging mode is unidirectional.
Default: bidirectional(1)
"
::= { hwL2IfMibObject 10 }
hwMacAddressLearnPolicy OBJECT-TYPE
SYNTAX INTEGER
{
svlanBased(1),
cvlanBased(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address learning policy.
Options:
1. svlanBased(1) -indicates that the MAC address learning is based on SVLAN(service VLAN)
2. cvlanBased(2) -indicates that the MAC address learning is based on CVLAN(client VLAN)
Default: svlanBased(1)
"
::= { hwL2IfMibObject 12 }
hwMacAddressFlappingDetectionControl OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch for the MAC address flapping detection.
Options:
1. enabled(1) -Enable the MAC address flapping detection.
2. disabled(2) -Disable the MAC address flapping detection.
Default: disabled(2)
"
::= { hwL2IfMibObject 13 }
hwMacAddressFlappingDetectionPeriod OBJECT-TYPE
SYNTAX Integer32(10..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address flapping detection period.
Range: 10-300
Unit: second
Default: 300
"
::= { hwL2IfMibObject 14 }
hwMacAddressFlappingDetectionLowerThreshold OBJECT-TYPE
SYNTAX Integer32(3..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address flapping detection lower threshold. The upper threshold
must be bigger than the lower threshold.
Range: 3-100
Default: 3
"
::= { hwL2IfMibObject 15 }
hwMacAddressFlappingDetectionUpperThreshold OBJECT-TYPE
SYNTAX Integer32(3..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address flapping detection upper threshold. The lower threshold
must be smaller than the upper threshold.
Range: 3-100
Default: 100
"
::= { hwL2IfMibObject 16 }
hwFabricMacHashConflictAutoAdjust OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch for the MAC hash conflict auto adjust.
Options:
1. enabled(1) -indicates that the MAC address hash conflict auto adjust function is enabled.
2. disabled(2) -indicates that the MAC address hash conflict auto adjust function is disabled.
Default: disabled(2)
"
::= { hwL2IfMibObject 17 }
hwMacHashConflictRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacHashConflictRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the line parameter configuration table of an MAC hash conflict.
It is used to query MAC hash congfig log.
This table mainly involves configuring parameters such as MacAddress, Vlan,
Location, DetectedTime, ResolvedTime.
The index of this table is hwMacHashConflictRecordIndex.
"
::= { hwL2IfMibObject 18 }
hwMacHashConflictRecordEntry OBJECT-TYPE
SYNTAX HwMacHashConflictRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the line parameter configuration table of an MAC hash conflict.
It is used to add, query, modify an MAC hash congfig log.
This table mainly involves configuring parameters such as MacAddress, Vlan,
Location, DetectedTime, ResolvedTime.
The index of this entry is hwMacHashConflictRecordIndex.
"
INDEX { hwMacHashConflictRecordIndex }
::= { hwMacHashConflictRecordTable 1 }
HwMacHashConflictRecordEntry ::=
SEQUENCE {
hwMacHashConflictRecordIndex
Integer32,
hwMacHashConflictRecordMacAddress
MacAddress,
hwMacHashConflictRecordVlan
Integer32,
hwMacHashConflictRecordLocation
OCTET STRING,
hwMacHashConflictRecordDetectedTime
DateAndTime,
hwMacHashConflictRecordResolvedTime
DateAndTime
}
hwMacHashConflictRecordIndex OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the MAC hash conflict,
bind MAC hash conflict identification.
"
DEFVAL { 1 }
::= { hwMacHashConflictRecordEntry 1 }
hwMacHashConflictRecordMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of an MAC hash conflict"
::= { hwMacHashConflictRecordEntry 2 }
hwMacHashConflictRecordVlan OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The conflict MAC binding vlan ID"
::= { hwMacHashConflictRecordEntry 3 }
hwMacHashConflictRecordLocation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The location of detecting MAC hash conflict"
::= { hwMacHashConflictRecordEntry 4 }
hwMacHashConflictRecordDetectedTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of detecting MAC hash conflict"
::= { hwMacHashConflictRecordEntry 5 }
hwMacHashConflictRecordResolvedTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of resolving MAC hash conflict"
::= { hwMacHashConflictRecordEntry 6 }
hwExtInterface OBJECT IDENTIFIER ::= { hwEthernetPort 2 }
hwifXXTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfXXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port information extension table, which is used to describe the port
extension features, such as whether a port is an aggregation port.
The index of this table is ifIndex.
"
::= { hwExtInterface 1 }
hwifXXEntry OBJECT-TYPE
SYNTAX HwIfXXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port information extension table, which is used to describe the port
extension features, such as whether a port is an aggregation port.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwifXXTable 1 }
HwIfXXEntry ::=
SEQUENCE {
hwifAggregatePort
INTEGER,
hwifMirrorPort
TruthValue,
hwifUnknowncastControl
Integer32,
hwifMcastControl
Integer32,
hwifFlowControl
TruthValue,
hwifSrcMacControl
TruthValue,
hwifClearStat
INTEGER,
hwifLinkStateChangeNum
Counter32,
hwifLinkUpTime
Counter32,
hwifClearCountTimeStamp
TimeTicks
}
hwifAggregatePort OBJECT-TYPE
SYNTAX INTEGER
{
noAggregatePort(1),
masterPort(2),
subPort(3),
invalid(-1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"whether an Ethernet port is in an aggregation group and whether the port is a master member or slave member.
Options:
1. noAggregatePort(1) -Ethernet port is not in an aggregation
2. masterPort(2) -Ethernet port is an aggregation master member
3. subPort(3) -Ethernet port is an aggregation slave member
4. invalid(-1) -invalid value
"
::= { hwifXXEntry 1 }
hwifMirrorPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Whether it is a mirror port.
"
::= { hwifXXEntry 2 }
hwifUnknowncastControl OBJECT-TYPE
SYNTAX Integer32 (5..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Unknown unicast suppression traffic node, in range of (5-100) %
"
::= { hwifXXEntry 3 }
hwifMcastControl OBJECT-TYPE
SYNTAX Integer32 (5..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Broadcast storm suppression, in range of (5-100) %.
"
::= { hwifXXEntry 4 }
hwifFlowControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Flow control status
"
::= { hwifXXEntry 5 }
hwifSrcMacControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Whether the source MAC address is being filtered.
"
::= { hwifXXEntry 6 }
hwifClearStat OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear port statistics information.
Options:
1. clear(1) -In the set operation, clear port statistics information
2. invalid(-1) -In the get operation, the invalid value -1 is returned.
"
::= { hwifXXEntry 7 }
hwifLinkStateChangeNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Short duration breaks in the link status"
::= { hwifXXEntry 8 }
hwifLinkUpTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since last link protocol reset/down"
::= { hwifXXEntry 9 }
hwifClearCountTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gives the time at which the counters that measure cumulative statistics"
::= { hwifXXEntry 10 }
hwifAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the aggregation management table of an Ethernet port. It implements
dividing multiple Ethernet ports into one aggregation group to realize
protection and load sharing among ports. After that, protection and load
sharing can be realized on the ports in an aggregation group.
The index of this table is hwifAggregateIndex.
"
::= { hwExtInterface 2 }
hwifAggregateEntry OBJECT-TYPE
SYNTAX HwIfAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the aggregation management table of an Ethernet port. It implements
dividing multiple Ethernet ports into one aggregation group to realize
protection and load sharing among ports. After that, protection and load
sharing can be realized on the ports in an aggregation group.
The index of this entry is hwifAggregateIndex.
"
INDEX { hwifAggregateIndex }
::= { hwifAggregateTable 1 }
HwIfAggregateEntry ::=
SEQUENCE {
hwifAggregateIndex
InterfaceIndex,
hwifAggregatePortName
OCTET STRING,
hwifAggregatePortListPorts
PortList,
hwifAggregateModel
INTEGER,
hwifAggregateRowStatus
RowStatus,
hwifAggregateWorkMode
INTEGER,
hwifAggregateOperType
INTEGER,
hwifAggregateMaxLinkNum
Integer32,
hwifAggregateMasterPortIndex
InterfaceIndex,
hwifAggregateLeastLinkNum
Integer32,
hwifAggregateHashOption
INTEGER,
hwifAggregateRandomSeed
Integer32,
hwifAggregateStatus
INTEGER
}
hwifAggregateIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of the master port in an aggregation group.
"
::= { hwifAggregateEntry 1 }
hwifAggregatePortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the description of a link-aggregation group of Ethernet ports.
Range: 0-40
"
::= { hwifAggregateEntry 2 }
hwifAggregatePortListPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of hwifAggregatePortListPorts is an octet string.
One bit in each octet indicates one port, so the octet string can indicate eight ports.
When a bit is set to 0, it indicates that the corresponding port does not belong to
this aggregation group. When a bit is set to 1, it indicates that the corresponding
port belongs to this aggregation group.
The order is as follows: The maximum number of ports in a slot is 64, so the ports need
to occupy eight octets. The order, from left to right, is presented as eight groups,
0-7, 8-15, 16-23, 24-31, 32-39, 40-47, 48-55, and 56-63. In each octet, the port IDs in
ascending order is presented from low bit to high bit. On the MA5600T, the slot ID starts
from 0.
For example, the mask of port 0/1/0 is (HEX) 0000000000000000 0100000000000000
(the first eight bytes are the mask of the port in slot 0).
"
::= { hwifAggregateEntry 3 }
hwifAggregateModel OBJECT-TYPE
SYNTAX INTEGER
{
ingress(1),
ingressEgress(2),
roundRobin(3),
egress(4),
mplsLabel(5),
srcDstIp(6),
ipEnhance(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mode of a link-aggregating group.
Options:
1. ingress(1) -load sharing only according to the source MAC
2. ingressEgress(2) -Ingress+egress, load sharing according to source MAC and the destination MAC
3. roundRobin(3) -round load sharing
4. egress(4) -load sharing only according to destination MAC
5. mplsLabel(5) -load sharing only according to mpls label
6. srcDstIp(6) -load sharing according to source IP and destination IP
7. ipEnhance(7) -load sharing according to source IP, destination IP, protocol number etc
Only ingress(1), ingressEgress(2), mplsLabel(5), srcDstIp(6) and ipEnhance(7) is supported.
"
::= { hwifAggregateEntry 4 }
hwifAggregateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The present operation status of the row."
::= { hwifAggregateEntry 5 }
hwifAggregateWorkMode OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
lacpStatic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Workmode of a link-aggregation.
Options:
1. manual(1) -manual link aggregation
2. lacpStatic(2) -lacp static link aggregation
"
::= { hwifAggregateEntry 6 }
hwifAggregateOperType OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
del(2),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Operation type of link-aggregation, use hwifAggregatePortListPorts note to set the
port list to be added/deleted in an aggregation group.
Options:
1. add(1) -add port(s) to a link-aggregation
2. del(2) -delete port(s) from a link-aggregation
3. invalid(-1) -invalid value
"
::= { hwifAggregateEntry 7 }
hwifAggregateMaxLinkNum OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the maximum number of links in an aggregation group.
When you add an aggregation group, hwifAggregateMaxLinkNum is optional,
If this leaf is not set, the value is 255 by default.
Only when hwifAggregateWorkMode is set to static LACP, the maximum number of links is
configurable.
Range: 1-255
Default: 255
"
::= { hwifAggregateEntry 8 }
hwifAggregateMasterPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IfIndex of the master port in an aggregation group.
"
::= { hwifAggregateEntry 9 }
hwifAggregateLeastLinkNum OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the least number of links in an aggregation group.
When you add an aggregation group, hwifAggregateLeastLinkNum is optional,
If this leaf is not set, the value is 255 by default.
Only when hwifAggregateWorkMode is set to static LACP, the least number of links is
configurable.
Range: 1-255
Default: 255
"
::= { hwifAggregateEntry 10 }
hwifAggregateHashOption OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
crc(2),
xor8(3),
xor3(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the hash option algorithm of a link-aggregating group.
Options:
1. default(1) -Indicates the default route selection algorithm.
2. crc(2) -Indicates that the CRC algorithm is used to calculate packets outgoing.
3. xor8(3) -Indicates that the 8-bit XOR algorithm is used to calculate packets outgoing.
4. xor3(4) -Indicates that the 3-bit XOR algorithm is used to calculate packets outgoing.
Default: default(1)
"
::= { hwifAggregateEntry 11 }
hwifAggregateRandomSeed OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the random seed value of the link-aggregation group.
When you add an aggregation group, hwifAggregateRandomSeed is optional,
If this leaf is not set, the value is 0 by default.
Range: 0-15
Default: 0
"
::= { hwifAggregateEntry 12 }
hwifAggregateStatus OBJECT-TYPE
SYNTAX INTEGER
{
forwarding(1),
block(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the forwarding status of the link-aggregation group."
::= { hwifAggregateEntry 13 }
hwMacToVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacToVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates VLAN and the ID list of PVC according to the MAC address.
The index of this table is hwMacAddress.
"
::= { hwExtInterface 3 }
hwMacToVlanEntry OBJECT-TYPE
SYNTAX HwMacToVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates VLAN and the ID list of PVC according to the MAC address.
The index of this entry is hwMacAddress.
"
INDEX { hwMacAddress }
::= { hwMacToVlanTable 1 }
HwMacToVlanEntry ::=
SEQUENCE {
hwMacAddress
MacAddress,
hwInterface
Integer32,
hwMacToVlanId
Integer32,
hwConnectId
Integer32
}
hwMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The MAC learned by the system
"
::= { hwMacToVlanEntry 1 }
hwInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
the interface index related to the port
"
::= { hwMacToVlanEntry 2 }
hwMacToVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mac binding vlan ID
"
::= { hwMacToVlanEntry 3 }
hwConnectId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
the atm pvc connect id of the port if it used as atm interface
"
::= { hwMacToVlanEntry 4 }
hwIfEthernetMirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfEthernetMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Ethernet interface mirror table.
The index of this table is hwifEthernetMirrorDstPort.
"
::= { hwExtInterface 4 }
hwIfEthernetMirrorEntry OBJECT-TYPE
SYNTAX HwIfEthernetMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Ethernet interface mirror table.
The index of this entry is hwifEthernetMirrorDstPort.
"
INDEX { hwifEthernetMirrorDstPort }
::= { hwIfEthernetMirrorTable 1 }
HwIfEthernetMirrorEntry ::=
SEQUENCE {
hwifEthernetMirrorDstPort
Integer32,
hwifEthernetMirrorSrcPort
PortList
}
hwifEthernetMirrorDstPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Destination mirror port, whose format is the same as ifIndex
"
::= { hwIfEthernetMirrorEntry 1 }
hwifEthernetMirrorSrcPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The mirror port to the source port
"
::= { hwIfEthernetMirrorEntry 2 }
hwifXStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwifXStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of the FE/GE interface statistics.
An interface containing objects at the
subnetwork layer and below for a particular
interface.
The index of this table is ifIndex."
::= { hwExtInterface 5 }
hwifXStatEntry OBJECT-TYPE
SYNTAX HwifXStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of the FE/GE interface statistics.
An interface containing objects at the
subnetwork layer and below for a particular
interface.
The index of this entry is ifIndex."
INDEX { ifIndex }
::= { hwifXStatTable 1 }
HwifXStatEntry ::=
SEQUENCE {
hwifInArpPkts
Counter64,
hwifInIcmpkts
Counter64,
hwifOutArpPkts
Counter64,
hwifOutIcmpPkts
Counter64,
hwifOutCRCAlignErrors
Counter64,
hwifOutUndersizePkts
Counter64,
hwifOutOversizePkts
Counter64,
hwifOutFragments
Counter64,
hwifOutJabbers
Counter64,
hwifOutCollisions
Counter64,
hwifOutPkts64Octets
Counter64,
hwifOutPkts65to127Octets
Counter64,
hwifOutPkts128to255Octets
Counter64,
hwifOutPkts256to511Octets
Counter64,
hwifOutPkts512to1023Octets
Counter64,
hwifOutPkts1024to1518Octets
Counter64,
hwifInCRCAlignErrors
Counter64,
hwifInUndersizePkts
Counter64,
hwifInOversizePkts
Counter64,
hwifInFragments
Counter64,
hwifInJabbers
Counter64,
hwifInPkts64Octets
Counter64,
hwifInPkts65to127Octets
Counter64,
hwifInPkts128to255Octets
Counter64,
hwifInPkts256to511Octets
Counter64,
hwifInPkts512to1023Octets
Counter64,
hwifInPkts1024to1518Octets
Counter64
}
hwifInArpPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of arp packets received on the
interface"
::= { hwifXStatEntry 1 }
hwifInIcmpkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of icmp packets received on the
interface"
::= { hwifXStatEntry 2 }
hwifOutArpPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of arp packets transmitted out of the
interface"
::= { hwifXStatEntry 3 }
hwifOutIcmpPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of icmp packets transmitted out of the
interface"
::= { hwifXStatEntry 4 }
hwifOutCRCAlignErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error)."
::= { hwifXStatEntry 5 }
hwifOutUndersizePkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed."
::= { hwifXStatEntry 6 }
hwifOutOversizePkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed."
::= { hwifXStatEntry 7 }
hwifOutFragments OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a
bad FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for etherStatsFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits."
::= { hwifXStatEntry 8 }
hwifOutJabbers OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms."
::= { hwifXStatEntry 9 }
hwifOutCollisions OBJECT-TYPE
SYNTAX Counter64
UNITS "Collisions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
would.
Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions.
Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected."
::= { hwifXStatEntry 10 }
hwifOutPkts64Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were 64 octets in length
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 11 }
hwifOutPkts65to127Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 12 }
hwifOutPkts128to255Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 13 }
hwifOutPkts256to511Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 14 }
hwifOutPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 15 }
hwifOutPkts1024to1518Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 16 }
hwifInCRCAlignErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets send that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error)."
::= { hwifXStatEntry 17 }
hwifInUndersizePkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets send that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed."
::= { hwifXStatEntry 18 }
hwifInOversizePkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets send that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed."
::= { hwifXStatEntry 19 }
hwifInFragments OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets send that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a
bad FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for etherStatsFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits."
::= { hwifXStatEntry 20 }
hwifInJabbers OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets send that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms."
::= { hwifXStatEntry 21 }
hwifInPkts64Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) send that were 64 octets in length
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 22 }
hwifInPkts65to127Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) send that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 23 }
hwifInPkts128to255Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) send that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 24 }
hwifInPkts256to511Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) send that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 25 }
hwifInPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) send that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 26 }
hwifInPkts1024to1518Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) send that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { hwifXStatEntry 27 }
hwBoardBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBoardBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the board bonding table. It is used for setting the bonding between boards.
In addition, it supports the query of the status of the interconnected ports on bound
boards. When you need to bind two boards or query the status of the interconnected
ports on either board, use this table. The bound boards can be configured with inter-board
aggregation and service configuration commands are delivered to the two boards.
The index of this table is hwBindBrdFSIndex.
"
::= { hwExtInterface 6 }
hwBoardBindEntry OBJECT-TYPE
SYNTAX HwBoardBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the board bonding table. It is used for setting the bonding between boards.
In addition, it supports the query of the status of the interconnected ports on bound
boards. When you need to bind two boards or query the status of the interconnected
ports on either board, use this table. The bound boards can be configured with inter-board
aggregation and service configuration commands are delivered to the two boards.
The index of this entry is hwBindBrdFSIndex.
"
INDEX { hwBindBrdFSIndex }
::= { hwBoardBindTable 1 }
HwBoardBindEntry ::=
SEQUENCE {
hwBindBrdFSIndex
InterfaceIndex,
hwBindBrdAnotherFSIndex
Integer32,
hwLeftBrdLinkStatus
Integer32,
hwRightBrdLinkStatus
Integer32,
hwBoardBindRowStatus
RowStatus,
hwLeftBrdPrimaryStatus
INTEGER,
hwLeftBrdSecondaryStatus
BITS,
hwRightBrdPrimaryStatus
INTEGER,
hwRightBrdSecondaryStatus
BITS
}
hwBindBrdFSIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ifindex of bound board in left slot."
::= { hwBoardBindEntry 1 }
hwBindBrdAnotherFSIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ifindex of bound board in right slot."
::= { hwBoardBindEntry 2 }
hwLeftBrdLinkStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link status of bound board in left slot.
1:link up 2:link down 2: default"
::= { hwBoardBindEntry 3 }
hwRightBrdLinkStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link status of bound board in right slot.
1:link up 2:link down 2: default"
::= { hwBoardBindEntry 4 }
hwBoardBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The present operation status of the row."
::= { hwBoardBindEntry 5 }
hwLeftBrdPrimaryStatus OBJECT-TYPE
SYNTAX INTEGER
{
isNr(1),
isAnr(2),
isRst(3),
isAnrst(4),
oosAu(5),
oosMa(6),
oosAuma(7),
oosAurst(8),
oosMaanr(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary status of the Board. This parameter indicates the current overall
service condition of an entity, i.e., whether it is in-service or out-of-service.
Options:
1. isNr(1) - In service, normal
2. isAnr(2) - In service, abnormal
3. isRst(3) - In service, restricted
4. isAnrst(4) - In service, abnormal & restricted
5. oosAu(5) - Out of service, autonomous
6. oosMa(6) - Out of service, management
7. oosAuma(7) - Out of service, autonomous & management
8. oosAurst(8) - Out of service, autonomous & restricted
9. oosMaanr(9) - Out of service, management & abnormal
"
::= { hwBoardBindEntry 6 }
hwLeftBrdSecondaryStatus OBJECT-TYPE
SYNTAX BITS
{
sstAins(0),
sstFaf(1),
sstFlt(2),
sstLpbk(3),
sstMea(4),
sstSgeo(5),
sstStbyh(6),
sstTs(7),
sstUas(8),
sstUeq(9),
sstWrk(10),
sstPwr(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates the secondary status of the board. The parameter provides additional
information pertaining to PST and PSTQ. For example, it may indicate the type and/or reason of
the external command, the event that occurred in the Network Element, etc. Multiple values may
apply to an entity at a given moment. The highest bit of SST value indicates the sst-ains(0) status;
the second highest bit of SST value indicates the sst-faf(1) status, and the rest can be deduced by analogy.
This BITS structure can report the following status:
1. sstAins(0) - This bit position positively reports that the status of the board is automatic in-service
2. sstFaf(1) - Facility failure
3. sstFlt(2) - Fault
4. sstLpbk(3) - Loopback
5. sstMea(4) - Mismatch of equipment and ettributes
6. sstSgeo(5) - Supporting entity outage
7. sstStbyh(6) - Standby-hot
8. sstTs(7) - Test
9. sstUas(8) - Unassigned
10. sstUeq(9) - Unequipped
11. sstWrk(10) - Working
12. sstPwr(11) - Power
"
::= { hwBoardBindEntry 7 }
hwRightBrdPrimaryStatus OBJECT-TYPE
SYNTAX INTEGER
{
isNr(1),
isAnr(2),
isRst(3),
isAnrst(4),
oosAu(5),
oosMa(6),
oosAuma(7),
oosAurst(8),
oosMaanr(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary status of the Board. This parameter indicates the current overall
service condition of an entity, i.e., whether it is in-service or out-of-service.
Options:
1. isNr(1) - In service, normal
2. isAnr(2) - In service, abnormal
3. isRst(3) - In service, restricted
4. isAnrst(4) - In service, abnormal & restricted
5. oosAu(5) - Out of service, autonomous
6. oosMa(6) - Out of service, management
7. oosAuma(7) - Out of service, autonomous & management
8. oosAurst(8) - Out of service, autonomous & restricted
9. oosMaanr(9) - Out of service, management & abnormal
"
::= { hwBoardBindEntry 8 }
hwRightBrdSecondaryStatus OBJECT-TYPE
SYNTAX BITS
{
sstAins(0),
sstFaf(1),
sstFlt(2),
sstLpbk(3),
sstMea(4),
sstSgeo(5),
sstStbyh(6),
sstTs(7),
sstUas(8),
sstUeq(9),
sstWrk(10),
sstPwr(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates the secondary status of the board. The parameter provides additional
information pertaining to PST and PSTQ. For example, it may indicate the type and/or reason of
the external command, the event that occurred in the Network Element, etc. Multiple values may
apply to an entity at a given moment. The highest bit of SST value indicates the sst-ains(0) status;
the second highest bit of SST value indicates the sst-faf(1) status, and the rest can be deduced by analogy.
This BITS structure can report the following status:
1. sstAins(0) - This bit position positively reports that the status of the board is automatic in-service
2. sstFaf(1) - Facility failure
3. sstFlt(2) - Fault
4. sstLpbk(3) - Loopback
5. sstMea(4) - Mismatch of equipment and attributes
6. sstSgeo(5) - Supporting entity outage
7. sstStbyh(6) - Standby-hot
8. sstTs(7) - Test
9. sstUas(8) - Unassigned
10. sstUeq(9) - Unequipped
11. sstWrk(10) - Working
12. sstPwr(11) - Power
"
::= { hwBoardBindEntry 9 }
hwVlanLoopTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Vlan Loop table entry
The index of this table is hwVlanLoopIndex
"
::= { hwExtInterface 7 }
hwVlanLoopEntry OBJECT-TYPE
SYNTAX HwVlanLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Vlan Loop table entry
The index of this entry is hwVlanLoopIndex
"
INDEX { hwVlanLoopIndex }
::= { hwVlanLoopTable 1 }
HwVlanLoopEntry ::=
SEQUENCE {
hwVlanLoopIndex
Integer32,
hwVlanLoopSrcIfIndex
Integer32,
hwVlanLoopSrcOuterVlanId
Integer32,
hwVlanLoopSrcInnerVlanId
Integer32,
hwVlanLoopDstIfIndex
Integer32,
hwVlanLoopDstOuterVlanId
Integer32,
hwVlanLoopDstInnerVlanId
Integer32,
hwVlanLoopTimeout
Integer32,
hwVlanLoopRowStatus
RowStatus
}
hwVlanLoopIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the vlan loop index, a unique value to identify the vlan loop.
Recently, the index value can only be fixed to 1.
"
::= { hwVlanLoopEntry 1 }
hwVlanLoopSrcIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source vlan loop port, whose format is the same as ifIndex "
::= { hwVlanLoopEntry 2 }
hwVlanLoopSrcOuterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The outer vlan id of the source port , the bound of parameter is 1 to 4095 "
::= { hwVlanLoopEntry 3 }
hwVlanLoopSrcInnerVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inner vlan id of the source port , the bound of patameter is 1 to 4095"
::= { hwVlanLoopEntry 4 }
hwVlanLoopDstIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination vlan loop port, whose format is the same as ifIndex "
::= { hwVlanLoopEntry 5 }
hwVlanLoopDstOuterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The outer vlan id of the destination port , the bound of patameter is 1 to 4095 "
::= { hwVlanLoopEntry 6 }
hwVlanLoopDstInnerVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inner vlan id of the destination port , the bound of patameter is 1 to 4095"
::= { hwVlanLoopEntry 7 }
hwVlanLoopTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remain time of the vlan loop before stopped.
Recently, this leaf is not supported.
Unit: second
"
::= { hwVlanLoopEntry 8 }
hwVlanLoopRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
To create vlan loop, set this leaf to createAndGo(4).
To delete vlan loop, set this leaf to destroy(6).
When this leaf is queried, the value is fixed to active(1).
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates creating vlan loop
3. destroy(6) -indicates deleting vlan loop
"
::= { hwVlanLoopEntry 9 }
--hwAggregateStatisticsTable
hwAggregateStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAggregateStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics kept for an aggregation.
The value of statistics is the sum of all etherports under an aggregation.
The index of this table is hwAggStatsIndex."
::= { hwExtInterface 9 }
hwAggregateStatisticsEntry OBJECT-TYPE
SYNTAX HwAggregateStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics kept for an aggregation.
The value of statistics is the sum of all etherports under an aggregation.
The index of this entry is hwAggStatsIndex."
INDEX { hwAggStatsIndex }
::= { hwAggregateStatisticsTable 1 }
HwAggregateStatisticsEntry ::= SEQUENCE {
hwAggStatsIndex Integer32,
hwAggStatsDropEvents Counter64,
hwAggStatsRecvOctets Counter64,
hwAggStatsSendOctets Counter64,
hwAggStatsTotalOctets Counter64,
hwAggStatsRecvPkts Counter64,
hwAggStatsSendPkts Counter64,
hwAggStatsTotalPkts Counter64,
hwAggStatsBroadcastRecvPkts Counter64,
hwAggStatsBroadcastSendPkts Counter64,
hwAggStatsBroadcastTotalPkts Counter64,
hwAggStatsMulticastRecvPkts Counter64,
hwAggStatsMulticastSendPkts Counter64,
hwAggStatsMulticastTotalPkts Counter64,
hwAggStatsCRCAlignErrors Counter64,
hwAggStatsUndersizePkts Counter64,
hwAggStatsOversizePkts Counter64,
hwAggStatsFragments Counter64,
hwAggStatsJabbers Counter64,
hwAggStatsCollisions Counter64,
hwAggStatsPkts64Octets Counter64,
hwAggStatsPkts65to127Octets Counter64,
hwAggStatsPkts128to255Octets Counter64,
hwAggStatsPkts256to511Octets Counter64,
hwAggStatsPkts512to1023Octets Counter64,
hwAggStatsPkts1024to1518Octets Counter64,
hwAggStatsPkts1519to2047Octets Counter64,
hwAggStatsPkts2048to4095Octets Counter64,
hwAggStatsPkts4096to9216Octets Counter64,
hwAggStatsPktsRecvPauseInfo Counter64,
hwAggStatsPktsSendPauseInfo Counter64,
hwAggStatsPktsSendSingleCollisionInfo Counter64,
hwAggStatsPktsSendMultiCollisionInfo Counter64,
hwAggStatsUpDiscardPacketsInfo Counter64,
hwAggStatsDownDiscardPacketsInfo Counter64,
hwAggStatsAlignmentErrorFramesInfo Counter64,
hwAggStatsSpeed Unsigned32,
hwAggStatsOutboundErrors Counter64,
hwAggStatsClear INTEGER
}
hwAggStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object(ifindex) uniquely identifies this
aggregate entry."
::= { hwAggregateStatisticsEntry 1 }
hwAggStatsDropEvents OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events in which packets
were dropped by the probe due to lack of resources.
Note that this number is not necessarily the number of
packets dropped; it is just the number of times this
condition has been detected.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 2 }
hwAggStatsRecvOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 3 }
hwAggStatsSendOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets of data (including
those in bad packets) sent on the
network (excluding framing bits but including
FCS octets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 4 }
hwAggStatsTotalOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets of data (including
those in bad packets) on the
network (excluding framing bits but including
FCS octets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 5 }
hwAggStatsRecvPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad packets,
broadcast packets, and multicast packets) received.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 6 }
hwAggStatsSendPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad packets,
broadcast packets, and multicast packets) sent.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 7 }
hwAggStatsTotalPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad packets,
broadcast packets, and multicast packets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 8 }
hwAggStatsBroadcastRecvPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets received that were
directed to the broadcast address. Note that this
does not include multicast packets.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 9 }
hwAggStatsBroadcastSendPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets send that were
directed to the broadcast address. Note that this
does not include multicast packets.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 10 }
hwAggStatsBroadcastTotalPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets that were
directed to the broadcast address. Note that this
does not include multicast packets.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 11 }
hwAggStatsMulticastRecvPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets received that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 12 }
hwAggStatsMulticastSendPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets sent that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 13 }
hwAggStatsMulticastTotalPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 14 }
hwAggStatsCRCAlignErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 15 }
hwAggStatsUndersizePkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 16 }
hwAggStatsOversizePkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 17 }
hwAggStatsFragments OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a
bad FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for hwAggStatsFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 18 }
hwAggStatsJabbers OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 19 }
hwAggStatsCollisions OBJECT-TYPE
SYNTAX Counter64
UNITS "Collisions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
would.
Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions.
Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 20 }
hwAggStatsPkts64Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 21 }
hwAggStatsPkts65to127Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 22 }
hwAggStatsPkts128to255Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 23 }
hwAggStatsPkts256to511Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 24 }
hwAggStatsPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 25 }
hwAggStatsPkts1024to1518Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 26 }
hwAggStatsPkts1519to2047Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of frames of 1519-2047 bytes.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 27 }
hwAggStatsPkts2048to4095Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of frames of 2048-4095 bytes.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 28 }
hwAggStatsPkts4096to9216Octets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of frames of 4096-9216 bytes.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 29 }
hwAggStatsPktsRecvPauseInfo OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PAUSE frames received by the port.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 30 }
hwAggStatsPktsSendPauseInfo OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PAUSE frames send from the port.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 31 }
hwAggStatsPktsSendSingleCollisionInfo OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets sent correctly after a single collision.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 32 }
hwAggStatsPktsSendMultiCollisionInfo OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets sent correctly after multiple collisions.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 33 }
hwAggStatsUpDiscardPacketsInfo OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of up stream discarded packets.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 34 }
hwAggStatsDownDiscardPacketsInfo OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of down stream discarded packets.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 35 }
hwAggStatsAlignmentErrorFramesInfo OBJECT-TYPE
SYNTAX Counter64
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of alignment error frames.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 36 }
hwAggStatsSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total speed of Aggregate ports."
::= { hwAggregateStatisticsEntry 37 }
hwAggStatsOutboundErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound packets that could not be transmitted because of errors.
'18446744073709551615' means invalid value."
::= { hwAggregateStatisticsEntry 38 }
hwAggStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear aggregate port statistics information.
Options:
1. clear(1) -In the set operation, clear port statistics information
2. invalid(-1) -In the get operation, the invalid value -1 is returned.
"
::= { hwAggregateStatisticsEntry 100 }
--hwAggregateStatisticsTable
hwBoardSpeedModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBoardSpeedModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the speed mode of the board.
The index of this table is hwFrameIndex and hwSlotIndex."
::= { hwExtInterface 10 }
hwBoardSpeedModeEntry OBJECT-TYPE
SYNTAX HwBoardSpeedModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the speed mode of the board.
The index of this entry is hwFrameIndex and hwSlotIndex."
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwBoardSpeedModeTable 1 }
HwBoardSpeedModeEntry ::=
SEQUENCE {
hwBoardSpeedMode
Integer32
}
hwBoardSpeedMode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The speed mode of the board.
Options:
1: port 0-7 GE(1)
2: port 0-7 10GE(2)
3: port 0-3 GE, port 4-7 10GE(3)
Default: port 0-7 GE(1)."
::= { hwBoardSpeedModeEntry 1 }
hwBoardCrcErrorAlarmControlTable OBJECT IDENTIFIER ::= { hwExtInterface 12 }
hwBoardCrcErrorAlarmSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the board CRC error alarm function.
Options:
1. enable(1) -Enable the board CRC error alarm function.
2. disable(2) -Disable the board CRC error alarm function.
Default: disable(2).
"
::= { hwBoardCrcErrorAlarmControlTable 1 }
hwBoardCrcErrorAlarmDetectInterval OBJECT-TYPE
SYNTAX Integer32 (30..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interval for CRC error alarm detection for a board. Range: 30-1800s. Default value: 60s.
"
::= { hwBoardCrcErrorAlarmControlTable 2 }
hwBoardCrcErrorAlarmDetectMultiplier OBJECT-TYPE
SYNTAX Integer32 (3..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of CRC error alarm detection periods. If increasing CRC errors are detected in n consecutive periods, an error alarm is generated.
If no CRC error increase is detected in n consecutive periods, a recovery alarm is generated. Range: 3-100. Default value: 10.
"
::= { hwBoardCrcErrorAlarmControlTable 3 }
hwExtIpdslam OBJECT IDENTIFIER ::= { hwEthernetPort 3 }
hwIpdslamConnectTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIpdslamConnectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains certain extended attributes of a service flow.
The index of this table is hwIpdslamConnectIndex.
"
::= { hwExtIpdslam 1 }
hwIpdslamConnectEntry OBJECT-TYPE
SYNTAX HwIpdslamConnectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains certain extended attributes of a service flow.
The index of this entry is hwIpdslamConnectIndex.
"
INDEX { hwIpdslamConnectIndex }
::= { hwIpdslamConnectTable 1 }
HwIpdslamConnectEntry ::=
SEQUENCE {
hwIpdslamConnectIndex
Integer32,
hwIpdslamConnectFlowControl
INTEGER,
hwIpdslamConnectMaxMacLearn
Integer32,
hwIpdslamConnectMacLearnd
Integer32,
hwIpdslamConnectPriorityLevel
INTEGER,
hwIpdslamConnectSrcVportPhysical
Integer32,
hwIpdslamConnectDstVportPhysical
Integer32,
hwIpdslamConnectInnerVlanId
Integer32,
hwIpdslamConnectInnerVlanPriority
Integer32,
hwIpdslamConnectMulticastForwardingMode
INTEGER
}
hwIpdslamConnectIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For the broadband service, this leaf is the same as hwExtSrvFlowIndex,
which indicates the service flow index,
a unique value to identify a service flow.
"
::= { hwIpdslamConnectEntry 1 }
hwIpdslamConnectFlowControl OBJECT-TYPE
SYNTAX INTEGER
{
bothOff(1),
srcDown(2),
dstDown(3),
srcDownAndDstDown(4),
srcUp(5),
srcBoth(6),
srcUpAndDstDown(7),
srcBothAndDstDown(8),
dstUp(9),
dstUpAndSrcDown(10),
dstBoth(11),
dstBothAndSrcDown(12),
dstUpAndSrcUp(13),
dstUpAndSrcBoth(14),
dstBothAndSrcUp(15),
dstBothAndSrcBoth(16)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the connection flow control, and the source destination direction is determined by the direction created by PVC.
The connect flow control.
Options:
1. bothOff(1) -The value is not supported.
2. srcDown(2) -The value is not supported.
3. dstDown(3) -The value is not supported.
4. srcDownAndDstDown(4) -The value is not supported.
5. srcUp(5) -The value is not supported.
6. srcBoth(6) -The value is not supported.
7. srcUpAndDstDown(7) -The value is not supported.
8. srcBothAndDstDown(8) -The value is not supported.
9. dstUp(9) -The value is not supported.
10. dstUpAndSrcDown(10) -The value is not supported.
11. dstBoth(11) -The value is not supported.
12. dstBothAndSrcDown(12) -The value is not supported.
13. dstUpAndSrcUp(13) -The value is not supported.
14. dstUpAndSrcBoth(14) -The value is not supported.
15. dstBothAndSrcUp(15) -The value is not supported.
16. dstBothAndSrcBoth(16) -The value is not supported.
"
::= { hwIpdslamConnectEntry 2 }
hwIpdslamConnectMaxMacLearn OBJECT-TYPE
SYNTAX Integer32 (-1|0..1023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum number of learnable MAC addresses of the service port.
Due to different hardware capabilities, the ports of different types support
different value ranges. The ATM or xDSL port supports the range of 0-255,
where 255 indicates unlimited. Here, the default value is 255.
The Ethernet or xPON port supports the range of 0-1023, where 1023 indicates
unlimited. Here, the default value is 1023.
"
::= { hwIpdslamConnectEntry 3 }
hwIpdslamConnectMacLearnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MACs this connection has learned.
"
::= { hwIpdslamConnectEntry 4 }
hwIpdslamConnectPriorityLevel OBJECT-TYPE
SYNTAX INTEGER
{
high(1),
low(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of this connection.
Options:
1. high(1) -The value is not supported.
2. low(2) -The value is not supported.
Before the priority function is enabled in LAN, the order of priority for each connection in LAN can be specified.
"
::= { hwIpdslamConnectEntry 5 }
hwIpdslamConnectSrcVportPhysical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source virtual physical port of this connection.
The port can't be bigger than or equal to 65535.
"
::= { hwIpdslamConnectEntry 6 }
hwIpdslamConnectDstVportPhysical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination virtual physical port of this connection.
The port can't be bigger than or equal to 65535.
"
::= { hwIpdslamConnectEntry 7 }
hwIpdslamConnectInnerVlanId OBJECT-TYPE
SYNTAX Integer32 (-1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the network-side inner VLAN ID of switch-oriented service flow.
The value of this leaf is variable with the value of hwExtSrvFlowTagTransform.
If the value of hwExtSrvFlowTagTransform is set to 3, 4, 5, this leaf can be set to 1-4095.
If the vlaue of hwExtSrvFlowTagTransform is set to 0, 1, 2 ,6, 7, 8, this leaf can not be set,
and the invalid value -1 will be returned.
This leaf is the same as hwExtSrvFlowNNIInnerVlanId.
"
DEFVAL { 1 }
::= { hwIpdslamConnectEntry 8 }
hwIpdslamConnectInnerVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7|255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the network-side inner VLAN priority of switch-oriented service flow.
The value of this leaf is variable with the value of hwExtSrvFlowTagTransform.
If the value of hwExtSrvFlowTagTransform is set to 3, 4, 5, this leaf can be set to 0-7.
If the vlaue of hwExtSrvFlowTagTransform is set to 0, 1, 2 ,6, 7, 8, this leaf can not be set,
and the invalid value 255 will be returned.
This leaf is the same as hwExtSrvFlowNNIInnerPriority.
It is recommended that the IP traffic table be used to configure the inner
VLAN priority of service flow instead of using hwExtSrvFlowNNIInnerPriority
or hwIpdslamConnectInnerVlanPriority.
"
DEFVAL { 0 }
::= { hwIpdslamConnectEntry 9 }
hwIpdslamConnectMulticastForwardingMode OBJECT-TYPE
SYNTAX INTEGER {
outervlan(1),
outervlanInnervlan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag of Multicast forwarding mode on service board.
Options:
1. outervlan(1) -Indicates outer VLAN.
2. outervlanInnervlan(2) -Indicates outer VLAN and inner VLAN.
"
DEFVAL { outervlan }
::= { hwIpdslamConnectEntry 10 }
--hwIpdslamBindIpTable
hwIpdslamBindIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIpdslamBindIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for binding an IP address to a service port. To statically configure the permitted IP address of
a service port, use this table.
After the IP address is bound to a service port successfully, the device allows only the upstream packets
whose source IP address is the bound IP address to pass.
The indexes of this table are hwIpdslamBindIpConnectIndex and hwIpdslamBindIpSubIndex, indicating the index of the service port.
The service port corresponding to this index must already be created in hwExtSrvFlowEntry.
hwIpdslamBindIpSubIndex is the index used for specifying the position on the service port for binding the
IP address.
"
::= { hwExtIpdslam 2 }
hwIpdslamBindIpEntry OBJECT-TYPE
SYNTAX HwIpdslamBindIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for binding an IP address to a service port. To statically configure the permitted IP address of
a service port, use this table.
After the IP address is bound to a service port successfully, the device allows only the upstream packets
whose source IP address is the bound IP address to pass.
The indexes of this entry are hwIpdslamBindIpConnectIndex and hwIpdslamBindIpSubIndex, indicating the index of the service port.
The service port corresponding to this index must already be created in hwExtSrvFlowEntry.
hwIpdslamBindIpSubIndex is the index used for specifying the position on the service port for binding the
IP address.
"
INDEX { hwIpdslamBindIpConnectIndex,hwIpdslamBindIpSubIndex }
::= { hwIpdslamBindIpTable 1 }
HwIpdslamBindIpEntry ::=
SEQUENCE {
hwIpdslamBindIpConnectIndex
Integer32,
hwIpdslamBindIpSubIndex
Integer32,
hwIpdslamBindIpAddress
IpAddress,
hwIpdslamBindIpAddressRowStatus
RowStatus,
hwIpdslamBindIpAddressType
InetAddressType,
hwIpdslamBindIpv6Address
InetAddress,
hwIpdslamBindIpv6PrefixLength
Unsigned32,
hwIpdslamBindIpMaskLength
Unsigned32
}
hwIpdslamBindIpConnectIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the service port bound to a specified IP address.
The service port corresponding to this index must already be created in
hwExtSrvFlowEntry.
"
::= { hwIpdslamBindIpEntry 1 }
hwIpdslamBindIpSubIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is used for specifying the position on the service port for binding the IP address.
hwIpdslamBindIpSubIndex is filled with -1, all IP addresses of the service port are deleted.
"
::= { hwIpdslamBindIpEntry 2 }
hwIpdslamBindIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the IP address bound to a specified service port.
"
::= { hwIpdslamBindIpEntry 3 }
hwIpdslamBindIpAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
During creation, hwIpdslamBindIpSubIndex may not be specified and can be
automatically allocated by the system. In this case, you can fill in -1 for
hwIpdslamBindIpSubIndex. After the system allocates a value successfully,
and the system returns the allocated value to the NMS.
During deletion, if you do not specify hwIpdslamBindIpSubIndex, that is,
hwIpdslamBindIpSubIndex is filled with -1, all IP addresses of the service port are deleted.
"
::= { hwIpdslamBindIpEntry 4 }
hwIpdslamBindIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the IP address type to bind.
Options:
1. ipv4(1) -indicates that the IP address type is ipv4
2. ipv6(2) -indicates that the IP address type is ipv6
During creation, if hwIpdslamBindIpAddressType is not specified, it defaults to ipv4 when
hwIpdslamBindIpAddress is specified.
"
::= { hwIpdslamBindIpEntry 5 }
hwIpdslamBindIpv6Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the IPv6 address bound to a specified service port.
It must be a valid unicast IPv6 address.
"
::= { hwIpdslamBindIpEntry 6 }
hwIpdslamBindIpv6PrefixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the prefix length of the IPv6 address bound to a specified service port.
i.e. Valid value only includes 48,56,60,64 and 128.
"
::= { hwIpdslamBindIpEntry 7 }
hwIpdslamBindIpMaskLength OBJECT-TYPE
SYNTAX Unsigned32 (17..32|4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Mask length of the IPv4 address bound to a specified service port.
Range: 17-32.
The invalid value is 4294967295.
"
::= { hwIpdslamBindIpEntry 8 }
--hwIpdslamBindMacTable
hwIpdslamBindMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIpdslamBindMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates MAC address binding feature.
The indexes of this table are hwIpdslamBindMacConnectIndex and hwIpdslamBindMacSubIndex.
"
::= { hwExtIpdslam 3 }
hwIpdslamBindMacEntry OBJECT-TYPE
SYNTAX HwIpdslamBindMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates MAC address binding feature.
The indexes of this entry are hwIpdslamBindMacConnectIndex and hwIpdslamBindMacSubIndex.
"
INDEX { hwIpdslamBindMacConnectIndex,hwIpdslamBindMacSubIndex }
::= { hwIpdslamBindMacTable 1 }
HwIpdslamBindMacEntry ::=
SEQUENCE {
hwIpdslamBindMacConnectIndex
Integer32,
hwIpdslamBindMacSubIndex
Integer32,
hwIpdslamBindMacAddress
MacAddress,
hwIpdslamBindMacAddressRowStatus
RowStatus
}
hwIpdslamBindMacConnectIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bind MAC address connect identification
"
::= { hwIpdslamBindMacEntry 1 }
hwIpdslamBindMacSubIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bind MAC address sub index
"
::= { hwIpdslamBindMacEntry 2 }
hwIpdslamBindMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address to bind
"
::= { hwIpdslamBindMacEntry 3 }
hwIpdslamBindMacAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Bind MAC address operate (add(4),delete(6))
"
::= { hwIpdslamBindMacEntry 4 }
--hwIpdslamQryLocation
hwIpdslamQryLocation OBJECT IDENTIFIER ::= { hwExtIpdslam 4 }
hwIpdslamQryCondition OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..17))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the content to be queried. Currently, only MAC address query is supported.
The following is an example of the input format of the MAC address:
Assuming that a MAC address is 00-e0-fc-11-00-00,
it should be input as 00-e0-fc-11-00-00.
"
::= { hwIpdslamQryLocation 1 }
hwIpdslamQryType OBJECT-TYPE
SYNTAX INTEGER
{
mac(1),
ip(2),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the query condition.
Options:
1. mac(1) -indicates the query is by a MAC address.
2. ip(2) -indicates that the query is by an IP address.
3. invalid(-1) -indicates invalid.
Currently, only MAC address query is supported.
"
::= { hwIpdslamQryLocation 2 }
-- hwCosQueueMappingMask
hwCosQueueMappingMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As an independent leaf node, describes the mapping between 802.1p priority and queue.
The queue ID is 0-7. Every four bits represents the queue ID to which an 802.1p priority corresponds.
When hwCosQueueMappingMask is set to 0xffffffff(4294967295), it means restoring it to default settings.
The default mapping is as follows: Packets with priority 7 join queue 7, packets with priority 6 join queue 6, and so on.
The corresponding bits are:
0111 0110 0101 0100 0011 0010 0001 0000
7 6 5 4 3 2 1 0
Default: 1985229328
"
::= { hwExtIpdslam 5 }
-- hwCosQueueSchedTable
hwCosQueueSchedTable OBJECT IDENTIFIER ::= { hwExtIpdslam 6 }
hwCosQueueSchedMode OBJECT-TYPE
SYNTAX INTEGER
{
strictPriority(1),
wrr(2),
wfq(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the queue scheduling mode.
Options:
1. strictPriority(1) -PQ
2. wrr(2) -WRR
3. wfq(3) -WFQ
In the case of PQ scheduling, PQ takes out all packets from a queue with a high priority and transmits them.
After such a transmission is completed, PQ performs the same on all packets in a queue with an intermediate priority,
a queue with a normal priority, and a queue with a low priority one by one.
In this way, packets in a queue with the highest priority precede packets in a queue with a less higher priority and
therefore are processed preferentially, even in case of congestion.
This ensures that packets for key services are processed first.
WRR and WFQ are of weighted scheduling type.
Unlike WRR, WFQ scheduling is based on byte quantity rather than packet quantity. This requires more precise weight assignment.
"
::= { hwCosQueueSchedTable 1 }
hwCosQueueWeightQue0 OBJECT-TYPE
SYNTAX Integer32(0..100|255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 0.
Range: 0-100, 255
When set the weight of queue to 255, it indicates that the queue is unused.
When modifying the weight of queue 0, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwCosQueueSchedTable 2 }
hwCosQueueWeightQue1 OBJECT-TYPE
SYNTAX Integer32(0..100|255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 1.
Range: 0-100, 255
When set the weight of queue to 255, it indicates that the queue is unused.
When modifying the weight of queue 1, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100. "
::= { hwCosQueueSchedTable 3 }
hwCosQueueWeightQue2 OBJECT-TYPE
SYNTAX Integer32(0..100|255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 2.
Range: 0-100, 255
When set the weight of queue to 255, it indicates that the queue is unused.
When modifying the weight of queue 2, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwCosQueueSchedTable 4 }
hwCosQueueWeightQue3 OBJECT-TYPE
SYNTAX Integer32(0..100|255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 3.
Range: 0-100, 255
When set the weight of queue to 255, it indicates that the queue is unused.
When modifying the weight of queue 3, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwCosQueueSchedTable 5 }
hwCosQueueWeightQue4 OBJECT-TYPE
SYNTAX Integer32(0..100|255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 4.
Range: 0-100, 255
When set the weight of queue to 255, it indicates that the queue is unused.
When modifying the weight of queue 4, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwCosQueueSchedTable 6 }
hwCosQueueWeightQue5 OBJECT-TYPE
SYNTAX Integer32(0..100|255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 5.
Range: 0-100, 255
When set the weight of queue to 255, it indicates that the queue is unused.
When modifying the weight of queue 5, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwCosQueueSchedTable 7 }
hwCosQueueWeightQue6 OBJECT-TYPE
SYNTAX Integer32 (0..100|255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 6.
Range: 0-100, 255
When set the weight of queue to 255, it indicates that the queue is unused.
When modifying the weight of queue 6, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwCosQueueSchedTable 8 }
hwCosQueueWeightQue7 OBJECT-TYPE
SYNTAX Integer32 (0..100|255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 7.
Range: 0-100, 255
When set the weight of queue to 255, it indicates that the queue is unused.
When modifying the weight of queue 7, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwCosQueueSchedTable 9 }
-- hwCosQueueDepthRateTable
hwCosQueueDepthRateTable OBJECT IDENTIFIER ::= { hwExtIpdslam 7 }
hwCosQueueDepthRateQue0 OBJECT-TYPE
SYNTAX Integer32(-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 0, that is, percentage of the buffer exclusively occupied by queue 0.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to default settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwCosQueueDepthRateTable 1 }
hwCosQueueDepthRateQue1 OBJECT-TYPE
SYNTAX Integer32(-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 1, that is, percentage of the buffer exclusively occupied by queue 1.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to default settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwCosQueueDepthRateTable 2 }
hwCosQueueDepthRateQue2 OBJECT-TYPE
SYNTAX Integer32(-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 2, that is, percentage of the buffer exclusively occupied by queue 2.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to default settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwCosQueueDepthRateTable 3 }
hwCosQueueDepthRateQue3 OBJECT-TYPE
SYNTAX Integer32(-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 3, that is, percentage of the buffer exclusively occupied by queue 3.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to default settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwCosQueueDepthRateTable 4 }
hwCosQueueDepthRateQue4 OBJECT-TYPE
SYNTAX Integer32(-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 4, that is, percentage of the buffer exclusively occupied by queue 4.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to default settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwCosQueueDepthRateTable 5 }
hwCosQueueDepthRateQue5 OBJECT-TYPE
SYNTAX Integer32(-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 5, that is, percentage of the buffer exclusively occupied by queue 5.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to default settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwCosQueueDepthRateTable 6 }
hwCosQueueDepthRateQue6 OBJECT-TYPE
SYNTAX Integer32(-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 6, that is, percentage of the buffer exclusively occupied by queue 6.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to default settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwCosQueueDepthRateTable 7 }
hwCosQueueDepthRateQue7 OBJECT-TYPE
SYNTAX Integer32(-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 7, that is, percentage of the buffer exclusively occupied by queue 7.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to default settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwCosQueueDepthRateTable 8 }
--hwIpTrafficParamTable
hwIpTrafficParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIpTrafficParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP traffic profile.
It is used to add, query, modify, or delete an IP traffic profile.
This table mainly involves configuring CAR parameters such as CIR, PIR,
CBS, and PBS and re-marking priority.
The index of this table is hwIpTrafficIndex.
"
::= { hwExtIpdslam 8 }
hwIpTrafficParamEntry OBJECT-TYPE
SYNTAX HwIpTrafficParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP traffic profile.
It is used to add, query, modify, or delete an IP traffic profile.
This table mainly involves configuring CAR parameters such as CIR, PIR,
CBS, and PBS and re-marking priority.
The index of this entry is hwIpTrafficIndex.
"
INDEX { hwIpTrafficIndex }
::= { hwIpTrafficParamTable 1 }
HwIpTrafficParamEntry ::=
SEQUENCE {
hwIpTrafficIndex
Integer32,
hwIpTrafficName
OCTET STRING,
hwIpTrafficCir
Integer32,
hwIpTrafficCbs
Integer32,
hwIpTrafficPir
Integer32,
hwIpTrafficPbs
Integer32,
hwIpTrafficCm
INTEGER,
hwIpTrafficPriority
Integer32,
hwIpTrafficPriorityPolicy
INTEGER,
hwIpTrafficRowStatus
RowStatus,
hwIpTrafficInnerPriority
Integer32,
hwIpTrafficInnerPriorityMappingIndex
Integer32,
hwIpTrafficPriorityMappingIndex
Integer32,
hwIpTrafficColorPolicy
INTEGER,
hwIpTrafficCarThresholdProfileIndex
Integer32,
hwIpTrafficFixBandWidth
Integer32,
hwIpTrafficCouplingFlag
INTEGER,
hwIpTrafficDSCP
Integer32,
hwIpTrafficDSCPMappingIndex
Integer32,
hwIpTrafficDropPrecedence
INTEGER,
hwIpTrafficColorDEI
INTEGER,
hwIpTrafficColorSource
INTEGER,
hwIpTrafficE2EPriority
Integer32,
hwIpTrafficE2EPriorityMappingIndex
Integer32,
hwIpTrafficRateProfileName
OCTET STRING,
hwIpTrafficQueuePolicyProfileIndex
Integer32,
hwIpTrafficPriorityGroupProfileName
OCTET STRING,
hwIpTrafficWrrWeightYellow
Integer32,
hwIpTrafficWrrWeightGreen
Integer32
}
hwIpTrafficIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..1024)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the table index.
Range: 1-1024, -1
When creating an IP traffic profile, you can specify or not specify a profile index.
If you specify it to 4294967295, the system will automatically allocates an idle index.
The system has seven default IP traffic profiles (profiles 1 to 7)
referenced by services of different traffic levels.
"
::= { hwIpTrafficParamEntry 1 }
hwIpTrafficName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic table name.
Each IP traffic profile has a unique name. When creating an IP traffic profile,
you can specify or not specify a profile name. If you do not specify it,
the system automatically generates a default profile name.
The IP traffic profile name is of a character string type, a string of 1-32 characters.
There are all together 92 valid characters for the name. These characters include the following:
uppercase and lowercase English letters (52 characters), numerals (0-9),
and 30 symbols: ! # $ % & ' ( ) * + , - . / : ; < = > @ [ \ ] ^ _ ` { | } ~.
"
::= { hwIpTrafficParamEntry 2 }
hwIpTrafficCir OBJECT-TYPE
SYNTAX Integer32 (-1|0..10240000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the committed information rate (CIR).
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
CIR is a mandatory parameter. This parameter must be an integer multiple of 64.
If the entered value is not an integer multiple of 64,
it rounds down to the nearest integer multiple of 64.
When the CIR value ranges from 0 to 63, value 0 takes effect. For boards that do not support the CIR with values less than 64, 64 takes effect if the configured value is less than 64.
-1 indicates CIR off.
"
::= { hwIpTrafficParamEntry 3 }
hwIpTrafficCbs OBJECT-TYPE
SYNTAX Integer32 (-1|0..1024000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the committed burst size (CBS).
Range: -1, 0-1024000000 bytes.
Unit: bytes.
CBS is an optional parameter. If the parameter is not specified,
it can be obtained by formula min(2000+cir*32,1024000000).
For boards that do not support CBS with values less than 2000, 2000 takes effect if the configured value is less than 2000.
-1 indicates CBS off.
"
::= { hwIpTrafficParamEntry 4 }
hwIpTrafficPir OBJECT-TYPE
SYNTAX Integer32 (-1|64..10240000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the peak information rate (PIR).
Range: -1, 64-10240000 kbit/s.
Unit: kbit/s.
PIR is an optional parameter. If the parameter is not specified,
it can be obtained through formula max(min(2*cir,10240000),64).
The PIR must be greater than or equal to the CIR.
-1 indicates PIR off.
"
::= { hwIpTrafficParamEntry 5 }
hwIpTrafficPbs OBJECT-TYPE
SYNTAX Integer32 (-1|2000..1024000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the peak burst size (PBS).
Range: -1, 2000-1024000000 bytes.
Unit: bytes.
PBS is an optional parameter.If the parameter is not specified,
it can be obtained by formula min(2000+32*pir,1024000000).
-1 indicates PBS off.
"
::= { hwIpTrafficParamEntry 6 }
hwIpTrafficCm OBJECT-TYPE
SYNTAX INTEGER
{
colorBlind(1),
colorAware(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the color-aware mode of the IP traffic profile.
Options:
1. colorBlind(1) -Indicates color blind mode.
2. colorAware(2) -Indicates color aware mode.
"
::= { hwIpTrafficParamEntry 7 }
hwIpTrafficPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the outer priority of the IP traffic profile.
The higher 16 bits indicate the outer priority mapping policy and the lower 16 bits indicate the outer priority.
The outer priority storage mode of the IP traffic profile is shown as follows:
---------------------------------------------------------
| 31-16 | 15-0 |
---------------------------------------------------------
| Outer priority mapping policy | Outer priority |
---------------------------------------------------------
Here,
Outer priority mapping policy:
0xFF (specified priority), 0xFE (priority mapped from the outer CoS field on the ingress),
0xFD (priority copied from the ToS field), 0xFC (priority mapped from the inner CoS field on the ingress),
and 0xFB (priority mapped from the packet DSCP field on the ingress).
Outer priority: Range: 0-7.
Outer priority here indicates the specified priority when the priority copy policy is to specify a priority.
Outer priority here indicates the default priority when the priority copy policy is to map the priority.
For example, if the outer priority mapping policy is 0xFB and the priority is 2,
the value of hwIpTrafficPriority is 0xFB0002, that is, 16449538.
"
::= { hwIpTrafficParamEntry 8 }
hwIpTrafficPriorityPolicy OBJECT-TYPE
SYNTAX INTEGER
{
localPriority(1),
egressOuter802dot1p(2),
inner802dot1p(3),
ingressOuter802dot1p(4),
queuePolicyProfile(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the queue-joining trust priority policy of the IP traffic profile.
Options:
1. localPriority(1) -Indicates the queue-joining trust the priority set by IP traffic profile.
2. egressOuter802dot1p(2) -Indicates the queue-joining trust the priority in the outer 802.1p tag of the egress packet.
3. inner802dot1p(3) -The value is not supported.
4. ingressOuter802dot1p(4) -Indicates the queue-joining trust the priority in the outer 802.1p tag of the ingress packet.
When the IP traffic table applying to the service flow in the inbound direction of the user port,
the queue-joining trust the priority in the outer 802.1p tag of the egress packet.
When the IP traffic table applying to the service flow in the outbound direction of the user port,
the queue-joining trust the priority in the outer 802.1p tag of the ingress packet.
5. queuePolicyProfile(5) -Indicates the queue-joining use the configuration of queue policy profile specified in hwIpTrafficQueuePolicyProfileIndex.
Only support localPriority(1), egressOuter802dot1p(2), ingressOuter802dot1p(4) and queuePolicyProfile(5) in current version.
"
::= { hwIpTrafficParamEntry 9 }
hwIpTrafficRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create an IP traffic profile, set this leaf to createAndGo(4);
to delete an IP traffic profile, set this leaf to destroy(6).
When an IP traffic profile is queried, this leaf is displayed as active(1).
The IP traffic profiles with indexes 1-7 do not support the create operation.
"
::= { hwIpTrafficParamEntry 10 }
hwIpTrafficInnerPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the inner priority of the IP traffic profile.
The higher 16 bits indicate the inner priority mapping policy and the lower 16 bits indicate the inner priority.
The inner priority storage mode of the IP traffic profile is shown as follows:
--------------------------------------------------------
| 31-16 | 15-0 |
--------------------------------------------------------
| Inner priority mapping policy | Inner priority |
--------------------------------------------------------
Here,
Inner priority mapping policy:
0xFF (specified priority), 0xFE (priority mapped from the outer CoS field on the ingress),
0xFD (priority copied from the ToS field), 0xFC (priority mapped from the inner CoS field on the ingress),
0xFB (priority mapped from the packet DSCP field on the ingress) and 0xFA (do not edit).
Inner priority: Range: 0-7.
Inner priority here indicates the specified priority when the priority copy policy is to specify a priority.
Inner priority here indicates the default priority when the priority copy policy is to copy the priority.
Inner priority is invalid when the priority copy policy is 0xFA (do not edit). Therefore, you must enter 0xff.
For example, if the inner priority copy policy is 0xFE and the default priority is 4,
the value of hwIpTrafficInnerPriority is 0xFE0004, that is, 16646148.
"
::= { hwIpTrafficParamEntry 11 }
hwIpTrafficInnerPriorityMappingIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the inner VLAN priority mapping policy is mapping from the outer or inner CoS domain on the ingress,
the index (range: 1-4) of the service port priority mapping profile is used.
The referenced service port priority mapping profile must exist in hwPbitsToPbitsMappingTable.
When the inner VLAN priority mapping policy is mapping from the packet DSCP domain on the ingress,
the index (range: 1-4) of the DSCP-to-802.1p priority mapping profile is used.
The referenced DSCP-to-802.1p priority mapping profile must exist in hwDscpToPbitsMappingTable.
-1 indicates the default value.
"
::= { hwIpTrafficParamEntry 12 }
hwIpTrafficPriorityMappingIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the outer VLAN priority mapping policy is mapping from the outer or inner CoS domain on the ingress,
the index (range: 1-4) of the service port priority mapping profile is used.
The referenced service port priority mapping profile must exist in hwPbitsToPbitsMappingTable.
When the outer VLAN priority mapping policy is mapping from the packet DSCP domain on the ingress,
the index (range: 1-4) of the DSCP-to-802.1p priority mapping profile is used.
The referenced DSCP-to-802.1p priority mapping profile must exist in hwDscpToPbitsMappingTable.
-1 indicates the default value.
"
::= { hwIpTrafficParamEntry 13 }
hwIpTrafficColorPolicy OBJECT-TYPE
SYNTAX INTEGER
{
dei(1),
cos(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the color policy of the IP traffic profile.
Options:
1. dei(1) -Indicate the dei mode.
2. cos(2) -Indicate the CoS mode.
"
::= { hwIpTrafficParamEntry 14 }
hwIpTrafficCarThresholdProfileIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the car-threshold profile of the IP traffic profile"
::= { hwIpTrafficParamEntry 15 }
hwIpTrafficFixBandWidth OBJECT-TYPE
SYNTAX Integer32 (-1|0..10240000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the fixed bandwidth to be allocated by the DBA. This parameter takes effect to the E2E service flow only on a GPON board.
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
hwIpTrafficFixBandWidth must be smaller than or equal to CIR.
-1 indicates fixed bandwidth is not supported.
"
::= { hwIpTrafficParamEntry 16 }
hwIpTrafficCouplingFlag OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Coupling Flag CF is set to either 0 or 1. The choice of the value for CF has the effect of controlling the volume of the yellow
Service Frames admitted to the network. When CF is set to 0, the long term average bit rate of bytes in yellow service frames admitted
to the network is bounded by EIR which is equal to PIR-CIR. When CF is set to 1, the long term average bit rate of bytes in yellow
Service Frames admitted to the network is bounded by PIR depending on volume of the offered green Service Frames.
In both cases the burst size of the yellow Service Frames admitted to the network is bounded which is equal to PIR-CIR.
Options:
1. disable(0) --disable the function of double-color.
2. enable(1) --enable the function of double-color.
"
::= { hwIpTrafficParamEntry 17 }
hwIpTrafficDSCP OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the DSCP source.
The most significant 16 bits indicate the DSCP policy, and the least significant 16 bits indicate the DSCP value.
--------------------------------------------------------
| 31-16 | 15-0 |
--------------------------------------------------------
| DSCP mark policy | DSCP value |
--------------------------------------------------------
Options of the DSCP policy are as follows:
OxFF: indicates that the DSCP field is not edited.
OxFE: indicates that the mapping is based on user-dscp.
0xFD: indicates the specified DSCP value.
Other values are not supported.
When the DSCP policy is user-dscp(OxFE), the hwIpTrafficDSCPMappingIndex must be set.
When the DSCP policy is not user-dscp(OxFE), the hwIpTrafficDSCPMappingIndex must be -1 or not set.
The DSCP value ranges from 0 to 63 and takes effect only when the DSCP policy is 0xFD.
For example, if the DSCP mark policy is 0xFD and the specified DSCP is 6,
the value of hwIpTrafficDSCP is 0xFD0006, that is, 16580614.
"
::= { hwIpTrafficParamEntry 18 }
hwIpTrafficDSCPMappingIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the referenced DSCP mapping profile.
When the hwIpTrafficDSCP is set to user-dscp(OxFE), the mapping profile index must be set to a valid profile.
When the hwIpTrafficDSCP is not set to user-dscp(OxFE), the mapping profile index must be set to -1 or not set.
-1 indicates that the function is not supported or this node does not take effect under the DSCP policy.
"
::= { hwIpTrafficParamEntry 19 }
hwIpTrafficDropPrecedence OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
remarkedOuterPriority(0),
remarkedInnerPriority(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet discarding policy.
Options:
1. invalid(-1) -indicates that this function is not supported.
2. remarkedOuterPriority(0) -indicates that the internal packet discarding priority is the priority of the mapped outer VLAN.
3. remarkedInnerPriority(1) -indicates that the internal packet discarding priority is the priority of the mapped inner VLAN.
"
::= { hwIpTrafficParamEntry 20 }
hwIpTrafficColorDEI OBJECT-TYPE
SYNTAX INTEGER
{
unmarkDei(0),
outerDei(1),
innerDei(2),
outerInnerDei(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the color mark. It indicates whether and where the color is marked.
Options:
1. unmarkDei(0) -indicates that the color is not marked.
2. outerDei(1) -indicates that the color is marked on the outer VLAN's DEI.
3. innerDei(2) -indicates that the color is marked on the inner VLAN's DEI.
4. outerInnerDei(3) -indicates that the color is marked on DEIs of both the inner and outer VLANs.
"
::= { hwIpTrafficParamEntry 21 }
hwIpTrafficColorSource OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
outerDei(1),
innerDei(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the color source. It indicates where the color is marked.
Default: outerDei(1).
Options:
1. invalid(-1) -invalid value.
2. outerDei(1) -indicates that the color is marked on the outer VLAN's DEI.
3. innerDei(2) -indicates that the color is marked on the inner VLAN's DEI.
"
::= { hwIpTrafficParamEntry 22 }
hwIpTrafficE2EPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the e2e priority of the IP traffic profile.
The higher 16 bits indicate the outer priority mapping policy and the lower 16 bits indicate the e2e priority.
The e2e priority storage mode of the IP traffic profile is shown as follows:
---------------------------------------------------------
| 31-16 | 15-0 |
---------------------------------------------------------
| e2e priority mapping policy | e2e priority |
---------------------------------------------------------
Here,
e2e priority mapping policy:
0xFE (priority mapped from the outer CoS field on the ingress),
0xFB (priority mapped from the packet DSCP field on the ingress)and 0xFA (do not edit).
e2e priority: Range: 0-7.
e2e priority here indicates the default priority when the priority copy policy is to map the priority.
e2e priority is invalid when the priority copy policy is 0xFA (do not edit). Therefore, you must enter 0xff.
For example, if the e2e priority mapping policy is 0xFB and the priority is 2,
the value of hwIpTrafficE2EPriority is 0xFB0002, that is, 16449538.
"
::= { hwIpTrafficParamEntry 23 }
hwIpTrafficE2EPriorityMappingIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the e2e VLAN priority mapping policy is mapping from the outer CoS domain on the ingress,
the index (range: 1-16) of the service port priority mapping profile is used.
The referenced service port priority mapping profile must exist in hwPbitsToPbitsMappingTable.
When the e2e VLAN priority mapping policy is mapping from the packet DSCP domain on the ingress,
the index (range: 1-50) of the DSCP-to-802.1p priority mapping profile is used.
The referenced DSCP-to-802.1p priority mapping profile must exist in hwDscpToPbitsMappingTable.
-1 indicates the default value.
"
::= { hwIpTrafficParamEntry 24 }
hwIpTrafficRateProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the rate profile.
"
::= { hwIpTrafficParamEntry 25 }
hwIpTrafficQueuePolicyProfileIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the queue policy profile.
Range: 1-4
"
::= { hwIpTrafficParamEntry 26 }
hwIpTrafficPriorityGroupProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the priority group profile.
"
::= { hwIpTrafficParamEntry 27 }
hwIpTrafficWrrWeightYellow OBJECT-TYPE
SYNTAX Integer32 (0|1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the WRR weight for yellow color packet.
Range: 0, 1-12
Default: 0
0 indicates WRR weight is auto calculated by PIR and CIR.
"
::= { hwIpTrafficParamEntry 28 }
hwIpTrafficWrrWeightGreen OBJECT-TYPE
SYNTAX Integer32 (0|1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the WRR weight for green color packet.
Range: 0, 1-12
Default: 0
0 indicates WRR weight is auto calculated by PIR and CIR.
"
::= { hwIpTrafficParamEntry 29 }
hwBoardTrafficModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBoardTrafficModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the CAR mode. It is used to modify and query the board CAR mode and does not support the
create or delete operation. Before the CAR mode of a board is modified, the board cannot have any
service port or port CAR configuration. When the CAR mode of a board is modified, hwFrameIndex and
hwSlotIndex must be specified and leaf hwBoardTrafficModeType must be issued.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwExtIpdslam 9 }
hwBoardTrafficModeEntry OBJECT-TYPE
SYNTAX HwBoardTrafficModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the CAR mode. It is used to modify and query the board CAR mode and does not support the
create or delete operation. Before the CAR mode of a board is modified, the board cannot have any
service port or port CAR configuration. When the CAR mode of a board is modified, hwFrameIndex and
hwSlotIndex must be specified and leaf hwBoardTrafficModeType must be issued.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex,hwSlotIndex }
::= { hwBoardTrafficModeTable 1 }
HwBoardTrafficModeEntry ::=
SEQUENCE {
hwBoardTrafficModeType
INTEGER
}
hwBoardTrafficModeType OBJECT-TYPE
SYNTAX INTEGER
{
servicePort(1),
portCos(2),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the board CAR mode. It can be flow CAR or port+CoS CAR.
If the board supports the port CAR mode, this leaf is used to configure the port CAR mode
in batches for all ports.
The port CAR mode is set by hwPortCarModeTable.
Options:
1. servicePort(1) -When the board CAR mode is set to servicePort(1),
the CAR is performed based on service port.
2. portCos(2) -when the board CAR mode is set to portCos(2),
the index of the traffic profile used when the service port is created becomes invalid,
and the CAR is controlled according to the priorities of packets on the port.
3. invalid(-1) -When this leaf is queried, if the board supports the port CAR mode and
the port CAR mode of ports are different, the value is invalid(-1).
Default: servicePort(1)
"
::= { hwBoardTrafficModeEntry 1 }
--hwCosPortTrafficTable
hwCosPortTrafficTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCosPortTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port+CoS CAR table. It is used to add, query, modify, or delete the IP traffic
profile used by the port+CoS CAR. The indexes of this table are ifIndex, hwCosPortExtPara1,
hwCosPortOntId, hwCosPortGemIndex and hwCosPortTrafficCos. The port+CoS CAR can be set only
when the board CAR mode is portCos(2). When querying or modifying the port+CoS CAR, you must
enter both the IP traffic profiles used by the upstream traffic and downstream traffic (either
the names or indexes of the upstream and downstream IP traffic profiles can be entered).
"
::= { hwExtIpdslam 10 }
hwCosPortTrafficEntry OBJECT-TYPE
SYNTAX HwCosPortTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port+CoS CAR table. It is used to add, query, modify, or delete the IP traffic
profile used by the port+CoS CAR. The indexes of this entry are ifIndex, hwCosPortExtPara1,
hwCosPortOntId, hwCosPortGemIndex and hwCosPortTrafficCos. The port+CoS CAR can be set only
when the board CAR mode is portCos(2). When querying or modifying the port+CoS CAR, you must
enter both the IP traffic profiles used by the upstream traffic and downstream traffic (either
the names or indexes of the upstream and downstream IP traffic profiles can be entered).
"
INDEX { ifIndex, hwCosPortExtPara1, hwCosPortOntId, hwCosPortGemIndex, hwCosPortTrafficCos }
::= { hwCosPortTrafficTable 1 }
HwCosPortTrafficEntry ::=
SEQUENCE {
hwCosPortTrafficCos
Integer32,
hwCosPortInboundTrafficIndex
Integer32,
hwCosPortOutboundTrafficIndex
Integer32,
hwCosPortTrafficRowStatus
RowStatus,
hwCosPortExtPara1
Integer32,
hwCosPortInboundTrafficName
OCTET STRING,
hwCosPortOutboundTrafficName
OCTET STRING,
hwCosPortOntId
Integer32,
hwCosPortGemIndex
Integer32,
hwCosPortCosGroupTableIndex
Integer32
}
hwCosPortTrafficCos OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is one of table indexes. Its meaning varies with the value range. When the value range is 0-7, it indicates the priority for
the specified CoS field of packets.When the value range is 8-15, it indicates the index for the CoS group of packets.
Before rate limitation based on CoS group is performed, the CoS-group table must be bound.
Only one of the two rate limitation modes can be selected at a time for a GEM port.
Range: 0-15
"
::= { hwCosPortTrafficEntry 1 }
hwCosPortInboundTrafficIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile used by upstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.
"
::= { hwCosPortTrafficEntry 2 }
hwCosPortOutboundTrafficIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile used by downstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.
"
::= { hwCosPortTrafficEntry 3 }
hwCosPortTrafficRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
In creation, you must set this leaf to createAndGo(4) and must enter both the IP traffic profiles used by the upstream traffic
and downstream traffic (either the names or indexes of the upstream and downstream IP traffic profiles can be entered);
in deletion, set this leaf to destroy(6);
in query, this leaf is displayed as active(1).
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates creating a cos port traffic
3. destroy(6) -indicates deleting a cos port traffic
"
::= { hwCosPortTrafficEntry 4 }
hwCosPortExtPara1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is one of table indexes. It is a difference parameter between access modes, indicating the GEM port ID.
This leaf is valid when the GPON board works in the distributing mode and invalid in other cases. Value
-1 indicates that the leaf is invalid.
Default: -1
"
::= { hwCosPortTrafficEntry 5 }
hwCosPortInboundTrafficName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the IP address used by upstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.
"
::= { hwCosPortTrafficEntry 6 }
hwCosPortOutboundTrafficName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the IP address used by downstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.
"
::= { hwCosPortTrafficEntry 7 }
hwCosPortOntId OBJECT-TYPE
SYNTAX Integer32 (-1|0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is one of table indexes. It is a difference parameter between access modes, indicating the ONT ID.
Range: -1, 0-255
This leaf is valid when the GPON works in the profile mode or when the board is an EPON board. In other
cases, this index is invalid. Value 4294967295 indicates that the leaf is invalid.
Default: -1
"
::= { hwCosPortTrafficEntry 8 }
hwCosPortGemIndex OBJECT-TYPE
SYNTAX Integer32 (-1|0..1023)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is one of table indexes. It is a difference parameter between access modes, indicating the GEM index.
Range: -1, 0-1023
This leaf is valid when the GPON board works in the profile mode and invalid in other cases. Value
-1 indicates that the leaf is invalid.
Default: -1
"
::= { hwCosPortTrafficEntry 9 }
hwCosPortCosGroupTableIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the index of the CoS-group table bound to the GEM port.
Range: -1 | 1-16
The value -1 indicates that this leaf is invalid.
"
::= { hwCosPortTrafficEntry 10 }
-- hwIsCtrlPacket2CPU
hwIsCtrlPacket2CPU OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch for transmitting control packets to the CPU
when the maximum number of learnable dynamic MAC addresses is set to 0.
Options:
1. enable(1) -indicates that the PPPoA LCP_config, PPPoA LCP_terminate_req,
PPPoE discovery, IGMP, ICMP, DHCP, and OAM packets reported by
the service port are transmitted to the CPU when the maximum
number of learnable MAC addresses of the service port is 0.
2. disable(2) -indicates that after the transmission of control packets to the
CPU is disabled, control packets are not transmitted to the CPU
when the maximum number of learnable MAC addresses of the service
port is 0.
"
::= { hwExtIpdslam 11 }
-- hwIpTrafficIndexNext
hwIpTrafficIndexNext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for hwIpTrafficIndex
when creating entries are being created in the hwIpTrafficParamTable.
The value 0 indicates that no unassigned entries are available.
To obtain the hwIpTrafficIndex value for a new entry,
the manager issues a management protocol retrieval operation to obtain the current value of this object.
After each retrieval, the agent must modify the value to the next unassigned index.
After a manager retrieves a value, the agent will determine through its local policy when this
index value will be made available for reuse.
"
::= { hwExtIpdslam 12 }
-- hwCosWREDThresholdTable
hwCosWREDThresholdTable OBJECT IDENTIFIER ::= { hwExtIpdslam 13 }
hwCosWREDThreshold0 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop threshold of queue 0.
Range: -1,0-100
-1 is the invalid value.
When configuring the priority threshold of CoS queues, make sure that hwEarlyDropMode be priBase(1).
"
::= { hwCosWREDThresholdTable 1 }
hwCosWREDThreshold1 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop threshold of queue 1.
Range: -1,0-100. -1 is the invalid value.
When configuring the priority threshold of CoS queues, make sure that hwEarlyDropMode be priBase(1).
"
::= { hwCosWREDThresholdTable 2 }
hwCosWREDThreshold2 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop threshold of queue 2.
Range: -1,0-100.
-1 is the invalid value.
When configuring the priority threshold of CoS queues, make sure that hwEarlyDropMode be priBase(1).
"
::= { hwCosWREDThresholdTable 3 }
hwCosWREDThreshold3 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop threshold of queue 3.
Range: -1,0-100.
-1 is the invalid value.
When configuring the priority threshold of CoS queues, make sure that hwEarlyDropMode be priBase(1).
"
::= { hwCosWREDThresholdTable 4 }
hwCosWREDThreshold4 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop threshold of queue 4.
Range: -1,0-100.
-1 is the invalid value.
When configuring the priority threshold of CoS queues, make sure that hwEarlyDropMode be priBase(1).
"
::= { hwCosWREDThresholdTable 5 }
hwCosWREDThreshold5 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop threshold of queue 5.
Range: -1,0-100.
-1 is the invalid value.
When configuring the priority threshold of CoS queues, make sure that hwEarlyDropMode be priBase(1).
"
::= { hwCosWREDThresholdTable 6 }
hwCosWREDThreshold6 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop threshold of queue 6.
Range: -1,0-100.
-1 is the invalid value.
When configuring the priority threshold of CoS queues, make sure that hwEarlyDropMode be priBase(1).
"
::= { hwCosWREDThresholdTable 7 }
hwCosWREDThreshold7 OBJECT-TYPE
SYNTAX Integer32 (-1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop threshold of queue 7.
Range: -1,0-100.
-1 is the invalid value.
When configuring the priority threshold of CoS queues, make sure that hwEarlyDropMode be priBase(1).
"
::= { hwCosWREDThresholdTable 8 }
-- hwCarThresholdTable
hwCarThresholdTable OBJECT IDENTIFIER ::= { hwExtIpdslam 14 }
hwCarThresholdCos0 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 0. The four options are 12, 25, 50, and 100.
Default: 100
When traffic with CoS 0 reaches this threshold, the packets are discarded.
"
::= { hwCarThresholdTable 1 }
hwCarThresholdCos1 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 1. The four options are 12, 25, 50, and 100.
Default: 100
When traffic with CoS 1 reaches this threshold, the packets are discarded.
"
::= { hwCarThresholdTable 2 }
hwCarThresholdCos2 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 2. The four options are 12, 25, 50, and 100.
Default: 100
When traffic with CoS 2 reaches this threshold, the packets are discarded.
"
::= { hwCarThresholdTable 3 }
hwCarThresholdCos3 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 3. The four options are 12, 25, 50, and 100.
Default: 100
When traffic with CoS 3 reaches this threshold, the packets are discarded.
"
::= { hwCarThresholdTable 4 }
hwCarThresholdCos4 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 4. The four options are 12, 25, 50, and 100.
Default: 100
When traffic with CoS 4 reaches this threshold, the packets are discarded.
"
::= { hwCarThresholdTable 5 }
hwCarThresholdCos5 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 5. The four options are 12, 25, 50, and 100.
Default: 100
When traffic with CoS 5 reaches this threshold, the packets are discarded.
"
::= { hwCarThresholdTable 6 }
hwCarThresholdCos6 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 6. The four options are 12, 25, 50, and 100.
Default: 100
When traffic with CoS 6 reaches this threshold, the packets are discarded.
"
::= { hwCarThresholdTable 7 }
hwCarThresholdCos7 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 7. The four options are 12, 25, 50, and 100.
Default: 100
When traffic with CoS 7 reaches this threshold, the packets are discarded.
"
::= { hwCarThresholdTable 8 }
-- hwQueueGroupShapingTable
hwQueueGroupShapingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwQueueGroupShapingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates a traffic shaping table, which is used to perform traffic shaping on certain queues on a port.
The system currently supports traffic shaping on only queues 3 and 4 and at the same time PQ scheduling
is applied invariably between them.
The indexes of this table are ifIndex and hwQueueGroup.
ifIndex indicates the index of F/S/P on which traffic shaping is performed.
hwQueueGroup indicates a queue group on which traffic shaping is performed.
This parameter has 32 bits and each bit represents a queue.
To perform traffic shaping on a queue group, you just need to adjust bits to 1.
The system currently supports up to eight queues. Traffic shaping, however, is performed only on queues 3 and 4.
Hence, the index is variably 00000000 00000000 00000000 00011000 (in binary), that is, 0x18 (in hexadecimal notation).
"
::= { hwExtIpdslam 15 }
hwQueueGroupShapingEntry OBJECT-TYPE
SYNTAX HwQueueGroupShapingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates a traffic shaping table, which is used to perform traffic shaping on certain queues on a port.
The system currently supports traffic shaping on only queues 3 and 4 and at the same time PQ scheduling
is applied invariably between them.
The indexes of this entry are ifIndex and hwQueueGroup.
ifIndex indicates the index of F/S/P on which traffic shaping is performed.
hwQueueGroup indicates a queue group on which traffic shaping is performed.
This parameter has 32 bits and each bit represents a queue.
To perform traffic shaping on a queue group, you just need to adjust bits to 1.
The system currently supports up to eight queues. Traffic shaping, however, is performed only on queues 3 and 4.
Hence, the index is variably 00000000 00000000 00000000 00011000 (in binary), that is, 0x18 (in hexadecimal notation).
"
INDEX { ifIndex, hwQueueGroup }
::= { hwQueueGroupShapingTable 1 }
HwQueueGroupShapingEntry ::=
SEQUENCE {
hwQueueGroup
Integer32,
hwQueueGroupSchedMode
INTEGER,
hwQueueGroupShapingInboundTrafficIndex
Integer32,
hwQueueGroupShapingOutboundTrafficIndex
Integer32,
hwQueueGroupShapingTrafficRowStatus
RowStatus
}
hwQueueGroup OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates a queue group on which traffic shaping is performed.
This parameter has 32 bits and each bit represents a queue.
To perform traffic shaping on a queue group, you just need to adjust bits to 1.
The system currently supports up to eight queues.
Traffic shaping, however, is performed only on queues 3 and 4.
Hence, the index is variably 00000000 00000000 00000000 00011000 (in binary), that is, 0x18 (in hexadecimal notation).
"
::= { hwQueueGroupShapingEntry 1 }
hwQueueGroupSchedMode OBJECT-TYPE
SYNTAX INTEGER
{
strictPriority(1),
wrr(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the queue scheduling mode.
The system currently supports only PQ scheduling (enumerated value: strictPriority(1)).
In the case of PQ scheduling, PQ takes out all packets from a queue with a high priority and transmits them.
After such a transmission is completed, PQ performs the same on all packets in a queue with an intermediate priority,
a queue with a normal priority, and a queue with a low priority one by one.
In this way, packets in a queue with the highest priority precede packets in a queue with a less higher priority and
therefore are processed preferentially, even in case of congestion.
This ensures that packets for key services are processed first.
Options:
1. strictPriority(1) -indicates the strict priority queue scheduling mode
2. wrr(2) -indicates the weighted round robin mode
"
::= { hwQueueGroupShapingEntry 2 }
hwQueueGroupShapingInboundTrafficIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile referenced by inbound packets.
"
::= { hwQueueGroupShapingEntry 3 }
hwQueueGroupShapingOutboundTrafficIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile referenced by outbound packets.
"
::= { hwQueueGroupShapingEntry 4 }
hwQueueGroupShapingTrafficRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create traffic shaping, set this leaf to createAndGo(4) (currently, only ADP, ADQ, and VDT series boards support traffic shaping).
To delete traffic shaping, set this leaf to destroy(6).
When traffic shaping is queried, this leaf is displayed as active(1).
"
::= { hwQueueGroupShapingEntry 5 }
-- hwEarlyDropMode
hwEarlyDropMode OBJECT-TYPE
SYNTAX INTEGER
{
priBase(1),
colorBase(2),
off(3),
colorWred(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the global early drop mode of the system.
Options:
1. priBase(1) -indicating priority-based early drop
2. colorBase(2) -indicating color-based early drop
3. off(3) -indicating disable the early drop function
4. colorWred(4) -indicating color-wred early drop
Default: colorBase(2)
In the case of priority-based early drop, if packets with a specified priority reach the preset threshold (queue depth percentage)
of their destination queue, subsequent packets of the same priority will be dropped instead of entering the queue.
In the case of color-based early drop, you can configure and query early drop parameters of packets of different colors.
In the case of off, the early drop function is disabled.
In the case of color-wred early drop, packets with different colors will discard by WRED(weighted random early detection) strategy.
For example, you can configure and query the early drop lower threshold, early drop upper threshold, and early drop possibility of
green packets or yellow packets.
"
::= { hwExtIpdslam 16 }
hwPortVlanPolicingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortVlanPolicingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port+VLAN CAR table. It is used to add, query, modify, or delete the IP traffic profile used by the port+VLAN CAR.
The indexes of this table are ifIndex and hwPortVlanPolicingVlanID. When querying or modifying the port+VLAN CAR, you must enter
both the upstream and downstream IP traffic profiles (either the names or indexes of the upstream and downstream IP traffic profiles
can be entered).
"
::= { hwExtIpdslam 17 }
hwPortVlanPolicingEntry OBJECT-TYPE
SYNTAX HwPortVlanPolicingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port+VLAN CAR table. It is used to add, query, modify, or delete the IP traffic profile used by the port+VLAN CAR.
The indexes of this entry are ifIndex and hwPortVlanPolicingVlanID. When querying or modifying the port+VLAN CAR, you must enter
both the upstream and downstream IP traffic profiles (either the names or indexes of the upstream and downstream IP traffic profiles
can be entered).
"
INDEX { ifIndex, hwPortVlanPolicingVlanID }
::= { hwPortVlanPolicingTable 1 }
HwPortVlanPolicingEntry ::=
SEQUENCE {
hwPortVlanPolicingVlanID
Integer32,
hwPortVlanPolicingInboundTrafficIndex
Integer32,
hwPortVlanPolicingOutboundTrafficIndex
Integer32,
hwPortVlanPolicingInboundTrafficName
OCTET STRING,
hwPortVlanPolicingOutboundTrafficName
OCTET STRING,
hwPortVlanPolicingTrafficRowStatus
RowStatus
}
hwPortVlanPolicingVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is one of the table indexes, indicating the VLAN of the CAR group.
The value 0 indicates that VLAN does not need to be specified when configuring a CAR-port.
"
::= { hwPortVlanPolicingEntry 1 }
-- 1.3.6.1.4.1.2011.5.14.3.17.1.2
hwPortVlanPolicingInboundTrafficIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile used by upstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.
"
::= { hwPortVlanPolicingEntry 2 }
hwPortVlanPolicingOutboundTrafficIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile used by downstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.
"
::= { hwPortVlanPolicingEntry 3 }
hwPortVlanPolicingInboundTrafficName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the IP address used by upstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.
"
::= { hwPortVlanPolicingEntry 4 }
hwPortVlanPolicingOutboundTrafficName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the IP address used by downstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.
"
::= { hwPortVlanPolicingEntry 5 }
hwPortVlanPolicingTrafficRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
In creation, you must set this leaf to createAndGo(4) and must enter both the
IP traffic profiles used by the upstream traffic and downstream traffic
(either the names or indexes of the upstream and downstream IP traffic
profiles can be entered); in deletion, set this leaf to destroy(6);
in query, this leaf is displayed as active(1).
"
::= { hwPortVlanPolicingEntry 6 }
hwPbitsToPbitsMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPbitsToPbitsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service port priority mapping profile.
It is used to modify and query the service port mapping relationships.
The index of this table is hwPbitsToPbitsMappingIndex.
Currently, the system supports only four service port priority mapping tables.
The first priority mapping table has fixed mappings 0-0, 1-1,...7-7, that is,
the priority is copied. The other three priority mapping tables can be customized
by users; for example, mappings 0-0, 1-1, 2-2, 3-3, 4-3, 5-3, 6-3, and 7-3 can be
configured.
A service port priority mapping table can be queried or modified, but cannot be
created or deleted. The service port priority mapping table with index 1 cannot be
modified.
"
::= { hwExtIpdslam 18 }
hwPbitsToPbitsMappingEntry OBJECT-TYPE
SYNTAX HwPbitsToPbitsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service port priority mapping profile.
It is used to modify and query the service port mapping relationships.
The index of this entry is hwPbitsToPbitsMappingIndex.
Currently, the system supports only four service port priority mapping tables.
The first priority mapping table has fixed mappings 0-0, 1-1,...7-7, that is,
the priority is copied. The other three priority mapping tables can be customized
by users; for example, mappings 0-0, 1-1, 2-2, 3-3, 4-3, 5-3, 6-3, and 7-3 can be
configured.
A service port priority mapping table can be queried or modified, but cannot be
created or deleted. The service port priority mapping table with index 1 cannot be
modified.
"
INDEX { hwPbitsToPbitsMappingIndex }
::= { hwPbitsToPbitsMappingTable 1 }
HwPbitsToPbitsMappingEntry ::=
SEQUENCE {
hwPbitsToPbitsMappingIndex
Integer32,
hwPbitsToPbitsMapping0
Integer32,
hwPbitsToPbitsMapping1
Integer32,
hwPbitsToPbitsMapping2
Integer32,
hwPbitsToPbitsMapping3
Integer32,
hwPbitsToPbitsMapping4
Integer32,
hwPbitsToPbitsMapping5
Integer32,
hwPbitsToPbitsMapping6
Integer32,
hwPbitsToPbitsMapping7
Integer32,
hwPbitsToPbitsMappingRowStatus
RowStatus
}
hwPbitsToPbitsMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the service port priority mapping table.
Range: 1-16
Currently, the system supports four service port priority mapping tables.
"
::= { hwPbitsToPbitsMappingEntry 1 }
hwPbitsToPbitsMapping0 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with priority 0.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with priority 0.
Bits 8-15: indicate the output priority of green packets with priority 0.
Bits 16-23: indicate the output priority of yellow packets with priority 0.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 0
"
::= { hwPbitsToPbitsMappingEntry 2 }
hwPbitsToPbitsMapping1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with priority 1.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with priority 1.
Bits 8-15: indicate the output priority of green packets with priority 1.
Bits 16-23: indicate the output priority of yellow packets with priority 1.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 1
"
::= { hwPbitsToPbitsMappingEntry 3 }
hwPbitsToPbitsMapping2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with priority 2.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with priority 2.
Bits 8-15: indicate the output priority of green packets with priority 2.
Bits 16-23: indicate the output priority of yellow packets with priority 2.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 2
"
::= { hwPbitsToPbitsMappingEntry 4 }
hwPbitsToPbitsMapping3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with priority 3.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with priority 3.
Bits 8-15: indicate the output priority of green packets with priority 3.
Bits 16-23: indicate the output priority of yellow packets with priority 3.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 3
"
::= { hwPbitsToPbitsMappingEntry 5 }
hwPbitsToPbitsMapping4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with priority 4.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with priority 4.
Bits 8-15: indicate the output priority of green packets with priority 4.
Bits 16-23: indicate the output priority of yellow packets with priority 4.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 4
"
::= { hwPbitsToPbitsMappingEntry 6 }
hwPbitsToPbitsMapping5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with priority 5.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with priority 5.
Bits 8-15: indicate the output priority of green packets with priority 5.
Bits 16-23: indicate the output priority of yellow packets with priority 5.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 5
"
::= { hwPbitsToPbitsMappingEntry 7 }
hwPbitsToPbitsMapping6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with priority 6.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with priority 6.
Bits 8-15: indicate the output priority of green packets with priority 6.
Bits 16-23: indicate the output priority of yellow packets with priority 6.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 6
"
::= { hwPbitsToPbitsMappingEntry 8 }
hwPbitsToPbitsMapping7 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with priority 7.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with priority 7.
Bits 8-15: indicate the output priority of green packets with priority 7.
Bits 16-23: indicate the output priority of yellow packets with priority 7.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 7
"
::= { hwPbitsToPbitsMappingEntry 9 }
hwPbitsToPbitsMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
It supports only the query function. active(1) is displayed in the query result.
Options:
1. active(1) -indicates the query operation
"
::= { hwPbitsToPbitsMappingEntry 10 }
-- hwFlowPriorityCarTagMode
hwFlowPriorityCarTagMode OBJECT-TYPE
SYNTAX INTEGER
{
externalFirst(1),
internalFirst(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to modify or query the tag priority mode of the system.
Options:
1. externalFirst(1) -Indicates the external tag First.
2. internalFirst(2) -Indicates the internal tag First.
Default: internalFirst(2)
This scalar leaf supports the modify and query operations only.
"
::= { hwExtIpdslam 19 }
--hwBoardvlanrangestateTable
hwBoardvlanrangestateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBoardvlanrangestateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates VLAN RANGE flow feature.
The indexes of this table are hwFrameIndex and hwSlotIndex."
::= { hwExtIpdslam 20 }
hwBoardvlanrangestateEntry OBJECT-TYPE
SYNTAX HwBoardvlanrangestateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates VLAN RANGE flow feature.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex,hwSlotIndex }
::= { hwBoardvlanrangestateTable 1 }
HwBoardvlanrangestateEntry ::=
SEQUENCE {
hwBoardvlanrangestate
INTEGER
}
hwBoardvlanrangestate OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN Range state.This object can be set to 'disable' or 'enable'
Options:
1. disable(1) -enable VLAN Range state.
2. enable(2) -disable VLAN Range state.
"
::= { hwBoardvlanrangestateEntry 1 }
hwXponCarportColorSensitive OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable or disable the xPON color perception.
Options:
1. enable(1) -the xPON color perception is enable
2. disable(2) -the xPON color perception is disable
Default: disable(2)
This scalar leaf supports the modify and query operations only.
"
::= { hwExtIpdslam 21 }
--hwQueueStatisticsstateTable
hwQueueStatisticsstateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwQueueStatisticsstateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Learns about the packet pass-through or drop status of a specified queue on a downstream port.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
Otherwise, the statistics of dropped packets are increased by 1.
Also learns about the byte pass-through status of a specified queue on a downstream port.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
The indexes of this table are hwQueueifIndex and hwQueueId.
"
::= { hwExtIpdslam 22 }
hwQueueStatisticsstateEntry OBJECT-TYPE
SYNTAX HwQueueStatisticsstateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Learns about the packet pass-through or drop status of a specified queue on a downstream port.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
Otherwise, the statistics of dropped packets are increased by 1.
Also learns about the byte pass-through status of a specified queue on a downstream port.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
The indexes of this entry are hwQueueifIndex and hwQueueId.
"
INDEX { hwQueueifIndex, hwQueueId }
::= { hwQueueStatisticsstateTable 1 }
HwQueueStatisticsstateEntry ::=
SEQUENCE {
hwQueueifIndex
Unsigned32,
hwQueueId
Integer32,
hwQueueStatisticsPassedNumber
Counter64,
hwQueueStatisticsDroppedNumber
Counter64,
hwQueueStatisticsReset
Integer32,
hwQueueStatisticsPassedBytes
Counter64,
hwQueueStatisticsDroppedUnRecognizedColorNumber
Counter64,
hwQueueStatisticsDroppedGreenNumber
Counter64,
hwQueueStatisticsDroppedYellowNumber
Counter64,
hwQueueStatisticsPassedGreenBytes
Counter64,
hwQueueStatisticsPassedGreenNumber
Counter64,
hwQueueStatisticsPassedYellowBytes
Counter64,
hwQueueStatisticsPassedYellowNumber
Counter64
}
hwQueueifIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the index of F/S/P on which packets are queried or deleted.
Its value must be a unique value greater than 0.
Its algorithm and value are the same as ifindex which is defined in IF-MIB (RFC 2233).
"
::= { hwQueueStatisticsstateEntry 1 }
hwQueueId OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates a specified queue ID.
Range: 0-7
The queues are real queues (errors are prompted when there are actually four queues on a board).
"
::= { hwQueueStatisticsstateEntry 2 }
hwQueueStatisticsPassedNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through packets.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
'18446744073709551615' means invalid value.
"
::= { hwQueueStatisticsstateEntry 3 }
hwQueueStatisticsDroppedNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of dropped packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.
"
::= { hwQueueStatisticsstateEntry 4 }
hwQueueStatisticsReset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether to delete packets statistics.
If hwQueueStatisticsReset is 1, it indicates that packets statistics of a specified queue will be deleted and counting will restart.
"
::= { hwQueueStatisticsstateEntry 5 }
hwQueueStatisticsPassedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through bytes.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
'18446744073709551615' means invalid value."
::= { hwQueueStatisticsstateEntry 6 }
hwQueueStatisticsDroppedUnRecognizedColorNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of unRecognized dropped packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.
"
::= { hwQueueStatisticsstateEntry 7 }
hwQueueStatisticsDroppedGreenNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of green dropped packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.
"
::= { hwQueueStatisticsstateEntry 8 }
hwQueueStatisticsDroppedYellowNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of yellow dropped packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.
"
::= { hwQueueStatisticsstateEntry 9 }
hwQueueStatisticsPassedGreenBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through bytes of green packets.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
'18446744073709551615' means invalid value.
"
::= { hwQueueStatisticsstateEntry 10 }
hwQueueStatisticsPassedGreenNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of green pass-through packets.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
'18446744073709551615' means invalid value.
"
::= { hwQueueStatisticsstateEntry 11 }
hwQueueStatisticsPassedYellowBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through bytes of yellow packets.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
'18446744073709551615' means invalid value.
"
::= { hwQueueStatisticsstateEntry 12 }
hwQueueStatisticsPassedYellowNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of yellow pass-through packets.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
'18446744073709551615' means invalid value.
"
::= { hwQueueStatisticsstateEntry 13 }
--hwCarGroupTable
hwCarGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCarGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service port CAR group table. It is used to add, modify, query, or delete a service port CAR group.
The index of this table is hwCarGroupIndex. When adding a service port CAR group, if you set hwCarGroupIndex to -1,
the system will allocate an idle index. When adding a service port CAR group, you must enter both the upstream and
downstream IP traffic profiles (either the names or indexes of the upstream and downstream IP traffic profiles can
be entered).
"
::= { hwExtIpdslam 23 }
hwCarGroupEntry OBJECT-TYPE
SYNTAX HwCarGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service port CAR group table. It is used to add, modify, query, or delete a service port CAR group.
The index of this entry is hwCarGroupIndex. When adding a service port CAR group, if you set hwCarGroupIndex to -1,
the system will allocate an idle index. When adding a service port CAR group, you must enter both the upstream and
downstream IP traffic profiles (either the names or indexes of the upstream and downstream IP traffic profiles can
be entered).
"
INDEX { hwCarGroupIndex }
::= { hwCarGroupTable 1 }
HwCarGroupEntry ::=
SEQUENCE {
hwCarGroupIndex
Integer32,
hwCarGroupInboundTrafficIndex
Integer32,
hwCarGroupOutboundTrafficIndex
Integer32,
hwCarGroupInboundTrafficName
OCTET STRING,
hwCarGroupOutboundTrafficName
OCTET STRING,
hwCarGroupRowStatus
RowStatus
}
hwCarGroupIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Table index, indicating the index of the service port CAR group.
Range: 1-32768.
When adding a service port CAR group, if you set hwCarGroupIndex to -1,
the system will allocate an idle index.
"
::= { hwCarGroupEntry 1 }
hwCarGroupInboundTrafficIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile used by upstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.
"
::= { hwCarGroupEntry 2 }
hwCarGroupOutboundTrafficIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile used by downstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.
"
::= { hwCarGroupEntry 3 }
hwCarGroupInboundTrafficName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the IP address used by upstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.
"
::= { hwCarGroupEntry 4 }
hwCarGroupOutboundTrafficName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the IP address used by downstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.
"
::= { hwCarGroupEntry 5 }
hwCarGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates creating a CAR group
3. destroy(6) -indicates deleting a CAR group
In creation, you must set this leaf to createAndGo(4)
and must enter both the IP traffic profiles used by the
upstream traffic and downstream traffic (either the names
or indexes of the upstream and downstream IP traffic profiles
can be entered); in deletion, set this leaf to destroy(6);
in query, this leaf is displayed as active(1).
"
::= { hwCarGroupEntry 6 }
--hwCarGroupSrvFlowTable
hwCarGroupSrvFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCarGroupSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the member table of a service port CAR group. It is used to add, query, or delete a member from
a service port group. The indexes of this table are hwCarGroupMemberIndex and hwCarGroupSrvFlowIndex.
"
::= { hwExtIpdslam 24 }
hwCarGroupSrvFlowEntry OBJECT-TYPE
SYNTAX HwCarGroupSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the member table of a service port CAR group. It is used to add, query, or delete a member from
a service port group. The indexes of this entry are hwCarGroupMemberIndex and hwCarGroupSrvFlowIndex.
"
INDEX { hwCarGroupMemberIndex , hwCarGroupSrvFlowIndex }
::= { hwCarGroupSrvFlowTable 1 }
HwCarGroupSrvFlowEntry ::=
SEQUENCE {
hwCarGroupMemberIndex
Integer32,
hwCarGroupSrvFlowIndex
Integer32,
hwCarGroupSrvFlowOperType
INTEGER,
hwCarGroupSrvFlowEndPointType
INTEGER
}
hwCarGroupMemberIndex OBJECT-TYPE
SYNTAX Integer32 (1..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the index of the service port CAR group.
Range: 1-32768
The service port CAR group indicated by this index must exist in hwCarGroupTable.
"
::= { hwCarGroupSrvFlowEntry 1 }
hwCarGroupSrvFlowIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the index of the service port CAR group.
The service port CAR group indicated by this index must exist in hwExtSrvFlowTable.
In the xPON access mode, the service ports to be added to the same CAR group must belong to the same PON port.
In the case of type C or type D protection, the service ports to be added to the same CAR group must be on the same ONT.
The service port of the vlan-range type cannot be added to a CAR group. For details, see hwExtSrvFlowTable.
"
::= { hwCarGroupSrvFlowEntry 2 }
hwCarGroupSrvFlowOperType OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
del(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operation type.
Options:
1. add(1) -Add a service port to a CAR group.
2. del(2) -Delete a service port to a CAR group.
To add a service port to a CAR group,
you must set this leaf to add(1); to delete a service port from a CAR group, you must set this leaf to del(2);
to query a service port that exists in a CAR group, this leaf is displayed as add(1).
"
::= { hwCarGroupSrvFlowEntry 3 }
hwCarGroupSrvFlowEndPointType OBJECT-TYPE
SYNTAX INTEGER
{
destination(1),
source(2),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the end-point type of a connection-oriented service flow.
Options:
1. destination(1) -indicates the destination end-point of a connection-oriented service port.
2. source(2) -indicates the source end-point of a connection-oriented service port.
3: invalid(-1) -indicates the switch-oriented service port.
When adding the source of a connection-oriented service port to a Car-Group, you must set the value of this leaf to source(2).
When adding the destination of a connection-oriented service port to a Car-Group, you can set the value of this leaf to destination(1), or not bind this leaf.
When adding a switched-oriented service port to a Car-Group, you can set the value of this leaf to any valid value, or not bind this leaf.
When a service port in a Car-Group is queried, if this port is a switch-oriented service port, the value of this leaf is invalid(-1);
if this port is the source of a connection-oriented service port, the value of this leaf is source (2);
if this port is the destination of a connection-oriented service port, the value of this leaf is destination (1)."
::= { hwCarGroupSrvFlowEntry 4 }
hwDscpToPbitsMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDscpToPbitsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the DSCP-to-802.1p priority mapping profile.
It is used to modify and query the DSCP-to-802.1p priority mapping relationships in the system.
The index of this table is hwDscpToPbitsMappingIndex.
By default, the system supports four DSCP-to-802.1p priority mapping profiles. These priority
mapping tables can be queried or modified, but cannot be created or deleted. The DSCP-to-802.1p
priority mapping table with index 1 cannot be modified.
"
::= { hwExtIpdslam 26 }
hwDscpToPbitsMappingEntry OBJECT-TYPE
SYNTAX HwDscpToPbitsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the DSCP-to-802.1p priority mapping profile.
It is used to modify and query the DSCP-to-802.1p priority mapping relationships in the system.
The index of this entry is hwDscpToPbitsMappingIndex.
By default, the system supports four DSCP-to-802.1p priority mapping profiles. These priority
mapping tables can be queried or modified, but cannot be created or deleted. The DSCP-to-802.1p
priority mapping table with index 1 cannot be modified.
"
INDEX { hwDscpToPbitsMappingIndex }
::= { hwDscpToPbitsMappingTable 1 }
HwDscpToPbitsMappingEntry ::=
SEQUENCE {
hwDscpToPbitsMappingIndex
Integer32,
hwDscpListMapToPriority0
BITS,
hwDscpListMapToPriority1
BITS,
hwDscpListMapToPriority2
BITS,
hwDscpListMapToPriority3
BITS,
hwDscpListMapToPriority4
BITS,
hwDscpListMapToPriority5
BITS,
hwDscpListMapToPriority6
BITS,
hwDscpListMapToPriority7
BITS,
hwDscpToPbitsMappingRowStatus
RowStatus
}
hwDscpToPbitsMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the DSCP-to-802.1p priority mapping table.
Range: 1-50
By default, the system supports four DSCP-to-802.1p priority mapping tables.
"
::= { hwDscpToPbitsMappingEntry 1 }
hwDscpListMapToPriority0 OBJECT-TYPE
SYNTAX BITS
{
dscp0(0),
dscp1(1),
dscp2(2),
dscp3(3),
dscp4(4),
dscp5(5),
dscp6(6),
dscp7(7),
dscp8(8),
dscp9(9),
dscp10(10),
dscp11(11),
dscp12(12),
dscp13(13),
dscp14(14),
dscp15(15),
dscp16(16),
dscp17(17),
dscp18(18),
dscp19(19),
dscp20(20),
dscp21(21),
dscp22(22),
dscp23(23),
dscp24(24),
dscp25(25),
dscp26(26),
dscp27(27),
dscp28(28),
dscp29(29),
dscp30(30),
dscp31(31),
dscp32(32),
dscp33(33),
dscp34(34),
dscp35(35),
dscp36(36),
dscp37(37),
dscp38(38),
dscp39(39),
dscp40(40),
dscp41(41),
dscp42(42),
dscp43(43),
dscp44(44),
dscp45(45),
dscp46(46),
dscp47(47),
dscp48(48),
dscp49(49),
dscp50(50),
dscp51(51),
dscp52(52),
dscp53(53),
dscp54(54),
dscp55(55),
dscp56(56),
dscp57(57),
dscp58(58),
dscp59(59),
dscp60(60),
dscp61(61),
dscp62(62),
dscp63(63)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mask of the DSCP that is mapped to 802.1p priority 0. If a bit of the mask is set to 1,
it indicates that the corresponding DSCP value is mapped to the 802.1p priority. The mask has 64 bits
in total, corresponding to DSCP 0 to DSCP 63. Note that in a byte, the high bit indicates a small DSCP
value. For example, if bit 7 is set to 1, this bit indicates DSCP 0.
Range: 0-0xFFFFFFFFFFFFFFFF
Default: 0xFF00000000000000
"
::= { hwDscpToPbitsMappingEntry 2 }
hwDscpListMapToPriority1 OBJECT-TYPE
SYNTAX BITS
{
dscp0(0),
dscp1(1),
dscp2(2),
dscp3(3),
dscp4(4),
dscp5(5),
dscp6(6),
dscp7(7),
dscp8(8),
dscp9(9),
dscp10(10),
dscp11(11),
dscp12(12),
dscp13(13),
dscp14(14),
dscp15(15),
dscp16(16),
dscp17(17),
dscp18(18),
dscp19(19),
dscp20(20),
dscp21(21),
dscp22(22),
dscp23(23),
dscp24(24),
dscp25(25),
dscp26(26),
dscp27(27),
dscp28(28),
dscp29(29),
dscp30(30),
dscp31(31),
dscp32(32),
dscp33(33),
dscp34(34),
dscp35(35),
dscp36(36),
dscp37(37),
dscp38(38),
dscp39(39),
dscp40(40),
dscp41(41),
dscp42(42),
dscp43(43),
dscp44(44),
dscp45(45),
dscp46(46),
dscp47(47),
dscp48(48),
dscp49(49),
dscp50(50),
dscp51(51),
dscp52(52),
dscp53(53),
dscp54(54),
dscp55(55),
dscp56(56),
dscp57(57),
dscp58(58),
dscp59(59),
dscp60(60),
dscp61(61),
dscp62(62),
dscp63(63)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mask of the DSCP is mapped to 802.1p priority 1. If a bit of the mask
is set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p
priority. The mask has 64 bits in total, corresponding to DSCP 0 to DSCP 63. Note
that in a byte, the high bit indicates a small DSCP value. For example, if bit 7
is set to 1, this bit indicates DSCP 0.
Range: 0-0xFFFFFFFFFFFFFFFF
Default: 0x00FF000000000000
"
::= { hwDscpToPbitsMappingEntry 3 }
hwDscpListMapToPriority2 OBJECT-TYPE
SYNTAX BITS
{
dscp0(0),
dscp1(1),
dscp2(2),
dscp3(3),
dscp4(4),
dscp5(5),
dscp6(6),
dscp7(7),
dscp8(8),
dscp9(9),
dscp10(10),
dscp11(11),
dscp12(12),
dscp13(13),
dscp14(14),
dscp15(15),
dscp16(16),
dscp17(17),
dscp18(18),
dscp19(19),
dscp20(20),
dscp21(21),
dscp22(22),
dscp23(23),
dscp24(24),
dscp25(25),
dscp26(26),
dscp27(27),
dscp28(28),
dscp29(29),
dscp30(30),
dscp31(31),
dscp32(32),
dscp33(33),
dscp34(34),
dscp35(35),
dscp36(36),
dscp37(37),
dscp38(38),
dscp39(39),
dscp40(40),
dscp41(41),
dscp42(42),
dscp43(43),
dscp44(44),
dscp45(45),
dscp46(46),
dscp47(47),
dscp48(48),
dscp49(49),
dscp50(50),
dscp51(51),
dscp52(52),
dscp53(53),
dscp54(54),
dscp55(55),
dscp56(56),
dscp57(57),
dscp58(58),
dscp59(59),
dscp60(60),
dscp61(61),
dscp62(62),
dscp63(63)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mask of the DSCP is mapped to 802.1p priority 2. If a bit of the
mask is set to 1, it indicates that the corresponding DSCP value is mapped to
the 802.1p priority. The mask has 64 bits in total, corresponding to DSCP 0
to DSCP 63. Note that in a byte, the high bit indicates a small DSCP value.
For example, if bit 7 is set to 1, this bit indicates DSCP 0.
Range: 0-0xFFFFFFFFFFFFFFFF
Default: 0x0000FF0000000000
"
::= { hwDscpToPbitsMappingEntry 4 }
hwDscpListMapToPriority3 OBJECT-TYPE
SYNTAX BITS
{
dscp0(0),
dscp1(1),
dscp2(2),
dscp3(3),
dscp4(4),
dscp5(5),
dscp6(6),
dscp7(7),
dscp8(8),
dscp9(9),
dscp10(10),
dscp11(11),
dscp12(12),
dscp13(13),
dscp14(14),
dscp15(15),
dscp16(16),
dscp17(17),
dscp18(18),
dscp19(19),
dscp20(20),
dscp21(21),
dscp22(22),
dscp23(23),
dscp24(24),
dscp25(25),
dscp26(26),
dscp27(27),
dscp28(28),
dscp29(29),
dscp30(30),
dscp31(31),
dscp32(32),
dscp33(33),
dscp34(34),
dscp35(35),
dscp36(36),
dscp37(37),
dscp38(38),
dscp39(39),
dscp40(40),
dscp41(41),
dscp42(42),
dscp43(43),
dscp44(44),
dscp45(45),
dscp46(46),
dscp47(47),
dscp48(48),
dscp49(49),
dscp50(50),
dscp51(51),
dscp52(52),
dscp53(53),
dscp54(54),
dscp55(55),
dscp56(56),
dscp57(57),
dscp58(58),
dscp59(59),
dscp60(60),
dscp61(61),
dscp62(62),
dscp63(63)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mask of the DSCP is mapped to 802.1p priority 3. If a bit of the mask is set
to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p priority.
The mask has 64 bits in total, corresponding to DSCP 0 to DSCP 63. Note that in a byte,
the high bit indicates a small DSCP value. For example, if bit 7 is set to 1, this bit
indicates DSCP 0.
Range: 0-0xFFFFFFFFFFFFFFFF
Default: 0x000000FF00000000
"
::= { hwDscpToPbitsMappingEntry 5 }
hwDscpListMapToPriority4 OBJECT-TYPE
SYNTAX BITS
{
dscp0(0),
dscp1(1),
dscp2(2),
dscp3(3),
dscp4(4),
dscp5(5),
dscp6(6),
dscp7(7),
dscp8(8),
dscp9(9),
dscp10(10),
dscp11(11),
dscp12(12),
dscp13(13),
dscp14(14),
dscp15(15),
dscp16(16),
dscp17(17),
dscp18(18),
dscp19(19),
dscp20(20),
dscp21(21),
dscp22(22),
dscp23(23),
dscp24(24),
dscp25(25),
dscp26(26),
dscp27(27),
dscp28(28),
dscp29(29),
dscp30(30),
dscp31(31),
dscp32(32),
dscp33(33),
dscp34(34),
dscp35(35),
dscp36(36),
dscp37(37),
dscp38(38),
dscp39(39),
dscp40(40),
dscp41(41),
dscp42(42),
dscp43(43),
dscp44(44),
dscp45(45),
dscp46(46),
dscp47(47),
dscp48(48),
dscp49(49),
dscp50(50),
dscp51(51),
dscp52(52),
dscp53(53),
dscp54(54),
dscp55(55),
dscp56(56),
dscp57(57),
dscp58(58),
dscp59(59),
dscp60(60),
dscp61(61),
dscp62(62),
dscp63(63)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mask of the DSCP is mapped to 802.1p priority 4. If a bit of the mask
is set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p
priority. The mask has 64 bits in total, corresponding to DSCP 0 to DSCP 63. Note
that in a byte, the high bit indicates a small DSCP value. For example, if bit 7 is
set to 1, this bit indicates DSCP 0.
Range: 0-0xFFFFFFFFFFFFFFFF
Default: 0x00000000FF000000
"
::= { hwDscpToPbitsMappingEntry 6 }
hwDscpListMapToPriority5 OBJECT-TYPE
SYNTAX BITS
{
dscp0(0),
dscp1(1),
dscp2(2),
dscp3(3),
dscp4(4),
dscp5(5),
dscp6(6),
dscp7(7),
dscp8(8),
dscp9(9),
dscp10(10),
dscp11(11),
dscp12(12),
dscp13(13),
dscp14(14),
dscp15(15),
dscp16(16),
dscp17(17),
dscp18(18),
dscp19(19),
dscp20(20),
dscp21(21),
dscp22(22),
dscp23(23),
dscp24(24),
dscp25(25),
dscp26(26),
dscp27(27),
dscp28(28),
dscp29(29),
dscp30(30),
dscp31(31),
dscp32(32),
dscp33(33),
dscp34(34),
dscp35(35),
dscp36(36),
dscp37(37),
dscp38(38),
dscp39(39),
dscp40(40),
dscp41(41),
dscp42(42),
dscp43(43),
dscp44(44),
dscp45(45),
dscp46(46),
dscp47(47),
dscp48(48),
dscp49(49),
dscp50(50),
dscp51(51),
dscp52(52),
dscp53(53),
dscp54(54),
dscp55(55),
dscp56(56),
dscp57(57),
dscp58(58),
dscp59(59),
dscp60(60),
dscp61(61),
dscp62(62),
dscp63(63)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mask of the DSCP is mapped to 802.1p priority 5. If a bit of the mask
is set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p
priority. The mask has 64 bits in total, corresponding to DSCP 0 to DSCP 63. Note
that in a byte, the high bit indicates a small DSCP value. For example, if bit 7
is set to 1, this bit indicates DSCP 0.
Range: 0-0xFFFFFFFFFFFFFFFF
Default: 0x0000000000FF0000
"
::= { hwDscpToPbitsMappingEntry 7 }
hwDscpListMapToPriority6 OBJECT-TYPE
SYNTAX BITS
{
dscp0(0),
dscp1(1),
dscp2(2),
dscp3(3),
dscp4(4),
dscp5(5),
dscp6(6),
dscp7(7),
dscp8(8),
dscp9(9),
dscp10(10),
dscp11(11),
dscp12(12),
dscp13(13),
dscp14(14),
dscp15(15),
dscp16(16),
dscp17(17),
dscp18(18),
dscp19(19),
dscp20(20),
dscp21(21),
dscp22(22),
dscp23(23),
dscp24(24),
dscp25(25),
dscp26(26),
dscp27(27),
dscp28(28),
dscp29(29),
dscp30(30),
dscp31(31),
dscp32(32),
dscp33(33),
dscp34(34),
dscp35(35),
dscp36(36),
dscp37(37),
dscp38(38),
dscp39(39),
dscp40(40),
dscp41(41),
dscp42(42),
dscp43(43),
dscp44(44),
dscp45(45),
dscp46(46),
dscp47(47),
dscp48(48),
dscp49(49),
dscp50(50),
dscp51(51),
dscp52(52),
dscp53(53),
dscp54(54),
dscp55(55),
dscp56(56),
dscp57(57),
dscp58(58),
dscp59(59),
dscp60(60),
dscp61(61),
dscp62(62),
dscp63(63)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mask of the DSCP is mapped to 802.1p priority 6. If a bit of the mask is
set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p priority.
The mask has 64 bits in total, corresponding to DSCP 0 to DSCP 63. Note that in a byte,
the high bit indicates a small DSCP value. For example, if bit 7 is set to 1, this bit
indicates DSCP 0.
Range: 0-0xFFFFFFFFFFFFFFFF
Default: 0x000000000000FF00
"
::= { hwDscpToPbitsMappingEntry 8 }
hwDscpListMapToPriority7 OBJECT-TYPE
SYNTAX BITS
{
dscp0(0),
dscp1(1),
dscp2(2),
dscp3(3),
dscp4(4),
dscp5(5),
dscp6(6),
dscp7(7),
dscp8(8),
dscp9(9),
dscp10(10),
dscp11(11),
dscp12(12),
dscp13(13),
dscp14(14),
dscp15(15),
dscp16(16),
dscp17(17),
dscp18(18),
dscp19(19),
dscp20(20),
dscp21(21),
dscp22(22),
dscp23(23),
dscp24(24),
dscp25(25),
dscp26(26),
dscp27(27),
dscp28(28),
dscp29(29),
dscp30(30),
dscp31(31),
dscp32(32),
dscp33(33),
dscp34(34),
dscp35(35),
dscp36(36),
dscp37(37),
dscp38(38),
dscp39(39),
dscp40(40),
dscp41(41),
dscp42(42),
dscp43(43),
dscp44(44),
dscp45(45),
dscp46(46),
dscp47(47),
dscp48(48),
dscp49(49),
dscp50(50),
dscp51(51),
dscp52(52),
dscp53(53),
dscp54(54),
dscp55(55),
dscp56(56),
dscp57(57),
dscp58(58),
dscp59(59),
dscp60(60),
dscp61(61),
dscp62(62),
dscp63(63)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mask of the DSCP is mapped to 802.1p priority 7. If a bit of the mask is
set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p priority.
The mask has 64 bits in total, corresponding to DSCP 0 to DSCP 63. Note that in a byte,
the high bit indicates a small DSCP value. For example, if bit 7 is set to 1, this bit
indicates DSCP 0.
Range: 0-0xFFFFFFFFFFFFFFFF
Default: 0x00000000000000FF
"
::= { hwDscpToPbitsMappingEntry 9 }
hwDscpToPbitsMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
It supports only the query function. active(1) is displayed in the query result.
Option:
1. active(1) -indicates the query operation
"
::= { hwDscpToPbitsMappingEntry 10 }
-- hwWREDTable
hwWREDTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwWREDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures or queries a WRED profile.
The index of this table is hwWREDIndex.
During the creation of a WRED profile, if hwWREDIndex is specified to -1,
it indicates that the index of the WRED profile is assigned by the system.
"
::= { hwExtIpdslam 27 }
hwWREDEntry OBJECT-TYPE
SYNTAX HwWREDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures or queries a WRED profile.
The index of this entry is hwWREDIndex.
During the creation of a WRED profile, if hwWREDIndex is specified to -1,
it indicates that the index of the WRED profile is assigned by the system.
"
INDEX { hwWREDIndex }
::= { hwWREDTable 1 }
HwWREDEntry ::=
SEQUENCE
{
hwWREDIndex
Integer32,
hwWREDGreenLowLimit
Integer32,
hwWREDGreenHighLimit
Integer32,
hwWREDGreenProbability
Integer32,
hwWREDYellowLowLimit
Integer32,
hwWREDYellowHighLimit
Integer32,
hwWREDYellowProbability
Integer32,
hwWREDRowStatus
RowStatus
}
hwWREDIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile that is operated. It uniquely identifies the WRED profile.
You can fill in -1 as the value of hwWREDIndex and issue the setting.
Then, the system automatically allocates an idle index and returns the index to the NMS.
"
::= { hwWREDEntry 1 }
hwWREDGreenLowLimit OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop low limit threshold of green packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDGreenLowLimit, hwWREDGreenHighLimit, and hwWREDGreenProbability must be specified at the same time.
"
::= { hwWREDEntry 2 }
hwWREDGreenHighLimit OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop high limit threshold of green packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDGreenLowLimit, hwWREDGreenHighLimit, and hwWREDGreenProbability must be specified at the same time.
"
::= { hwWREDEntry 3 }
hwWREDGreenProbability OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop probability of green packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDGreenLowLimit, hwWREDGreenHighLimit, and hwWREDGreenProbability must be specified at the same time.
"
::= { hwWREDEntry 4 }
hwWREDYellowLowLimit OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop low limit threshold of yellow packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDYellowLowLimit, hwWREDYellowHighLimit, and hwWREDYellowProbability must be specified at the same time.
"
::= { hwWREDEntry 5 }
hwWREDYellowHighLimit OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop high limit threshold of yellow packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDYellowLowLimit, hwWREDYellowHighLimit, and hwWREDYellowProbability must be specified at the same time.
"
::= { hwWREDEntry 6 }
hwWREDYellowProbability OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the early drop probability of yellow packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDYellowLowLimit, hwWREDYellowHighLimit, and hwWREDYellowProbability must be specified at the same time.
"
::= { hwWREDEntry 7 }
hwWREDRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a WRED profile, set this leaf to createAndGo(4) and specify the three leaves of hwWREDGreenLowLimit,
hwWREDGreenHighLimit, and hwWREDGreenProbability concurrently and the other three leaves of hwWREDYellowLowLimit,
hwWREDYellowHighLimit, and hwWREDYellowProbability, too.
To delete a WRED profile, set this leaf to destroy(6).
When a WRED profile is queried, this leaf is displayed as active(1).
"
::= { hwWREDEntry 8 }
hwQueueWREDTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwQueueWREDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the binding between queues and a WRED profile.
The index of hwQueueWREDTable is hwQueueWREDId. hwQueueWREDId indicates a specified queue ID.
Range: 1-8
Before binding/unbinding queues to/from a WRED profile,
make sure that the WRED profile be already created in hwWREDTable and hwEarlyDropMode be colorBase(2).
The index of this table is hwQueueWREDIndex.
"
::= { hwExtIpdslam 28 }
hwQueueWREDEntry OBJECT-TYPE
SYNTAX HwQueueWREDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the binding between queues and a WRED profile.
The index of hwQueueWREDTable is hwQueueWREDId. hwQueueWREDId indicates a specified queue ID.
Range: 1-8
Before binding/unbinding queues to/from a WRED profile,
make sure that the WRED profile be already created in hwWREDTable and hwEarlyDropMode be colorBase(2).
The index of this entry is hwQueueWREDIndex.
"
INDEX { hwQueueWREDId }
::= { hwQueueWREDTable 1 }
HwQueueWREDEntry ::=
SEQUENCE
{
hwQueueWREDId
Integer32,
hwQueueWREDIndex
Integer32
}
hwQueueWREDId OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates a specified queue ID.
Range: 1-8
Each queue can be separately bound to a WRED profile but you are allowed to bind one queue to the WRED profile at a time.
"
::= { hwQueueWREDEntry 1 }
hwQueueWREDIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile to be bound.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop information).
At the same time, to bind queues to a WRED profile, make sure that hwEarlyDropMode be colorBase(2).
If hwQueueWREDIndex is specified to -1, it indicates that the binding between queues and a WRED profile is removed.
"
::= { hwQueueWREDEntry 2 }
--hwIPPrecToPbitsMappingTable
hwIPPrecToPbitsMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIPPrecToPbitsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP precedence to pbits mapping table. This table is used to configure or query the mapping
between the IP precedence and pbits. It only supports the modify operation but not the create or delete
operation. The fist record of this table is the default record of the system and cannot be modified.
The index of this table is hwIPPrecToPbitsMappingIndex.
"
::= { hwExtIpdslam 29 }
hwIPPrecToPbitsMappingEntry OBJECT-TYPE
SYNTAX HwIPPrecToPbitsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP precedence to pbits mapping table. This table is used to configure or query the mapping
between the IP precedence and pbits. It only supports the modify operation but not the create or delete
operation. The fist record of this table is the default record of the system and cannot be modified.
The index of this entry is hwIPPrecToPbitsMappingIndex.
"
INDEX { hwIPPrecToPbitsMappingIndex }
::= { hwIPPrecToPbitsMappingTable 1 }
HwIPPrecToPbitsMappingEntry ::=
SEQUENCE {
hwIPPrecToPbitsMappingIndex
Integer32,
hwIPPrecToPbitsMapping0
Integer32,
hwIPPrecToPbitsMapping1
Integer32,
hwIPPrecToPbitsMapping2
Integer32,
hwIPPrecToPbitsMapping3
Integer32,
hwIPPrecToPbitsMapping4
Integer32,
hwIPPrecToPbitsMapping5
Integer32,
hwIPPrecToPbitsMapping6
Integer32,
hwIPPrecToPbitsMapping7
Integer32,
hwIPPrecToPbitsMappingRowStatus
RowStatus
}
hwIPPrecToPbitsMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the priority table used to translate packet's priority.
Range: 1-4
The system supports four user-ToS priority mapping tables.
"
::= { hwIPPrecToPbitsMappingEntry 1 }
hwIPPrecToPbitsMapping0 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with IP preference 0.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with IP preference 0.
Bits 8-15: indicate the output priority of green packets with IP preference 0.
Bits 16-23: indicate the output priority of yellow packets with IP preference 0.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 0
"
::= { hwIPPrecToPbitsMappingEntry 2 }
hwIPPrecToPbitsMapping1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with IP preference 1.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with IP preference 1.
Bits 8-15: indicate the output priority of green packets with IP preference 1.
Bits 16-23: indicate the output priority of yellow packets with IP preference 1.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 1
"
::= { hwIPPrecToPbitsMappingEntry 3 }
hwIPPrecToPbitsMapping2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with IP preference 2.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with IP preference 2.
Bits 8-15: indicate the output priority of green packets with IP preference 2.
Bits 16-23: indicate the output priority of yellow packets with IP preference 2.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 2
"
::= { hwIPPrecToPbitsMappingEntry 4 }
hwIPPrecToPbitsMapping3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with IP preference 0.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with IP preference 3.
Bits 8-15: indicate the output priority of green packets with IP preference 3.
Bits 16-23: indicate the output priority of yellow packets with IP preference 3.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 3
"
::= { hwIPPrecToPbitsMappingEntry 5 }
hwIPPrecToPbitsMapping4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with IP preference 4.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with IP preference 4.
Bits 8-15: indicate the output priority of green packets with IP preference 4.
Bits 16-23: indicate the output priority of yellow packets with IP preference 4.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 4
"
::= { hwIPPrecToPbitsMappingEntry 6 }
hwIPPrecToPbitsMapping5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with IP preference 5.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with IP preference 5.
Bits 8-15: indicate the output priority of green packets with IP preference 5.
Bits 16-23: indicate the output priority of yellow packets with IP preference 5.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 5
"
::= { hwIPPrecToPbitsMappingEntry 7 }
hwIPPrecToPbitsMapping6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with IP preference 6.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with IP preference 6.
Bits 8-15: indicate the output priority of green packets with IP preference 6.
Bits 16-23: indicate the output priority of yellow packets with IP preference 6.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 6
"
::= { hwIPPrecToPbitsMappingEntry 8 }
hwIPPrecToPbitsMapping7 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the output 802.1p priority of the mapping with IP preference 7.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the output priority of yellow and green packets with IP preference 7.
Bits 8-15: indicate the output priority of green packets with IP preference 7.
Bits 16-23: indicate the output priority of yellow packets with IP preference 7.
Bits 24-31: indicate the color of packets whose priority is to be modified.
0: indicates that the priorities of both yellow and green packets are modified (bits 0-7).
1: indicates that the priorities of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 7
"
::= { hwIPPrecToPbitsMappingEntry 9 }
hwIPPrecToPbitsMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
It supports only the query function. active(1) is always returned in the query operation.
Options:
1. active(1) -indicates the query operation
"
::= { hwIPPrecToPbitsMappingEntry 10 }
--hwPortCarModeTable
hwPortCarModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortCarModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to query and modify the port CAR mode.
The index of this table is ifIndex.
"
::= { hwExtIpdslam 30 }
hwPortCarModeEntry OBJECT-TYPE
SYNTAX HwPortCarModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to query and modify the port CAR mode.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwPortCarModeTable 1 }
HwPortCarModeEntry ::=
SEQUENCE {
hwPortCarMode
INTEGER
}
hwPortCarMode OBJECT-TYPE
SYNTAX INTEGER
{
servicePort(1),
portCos(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the port CAR mode. The port CAR mode can be by service port or by port and CoS.
Options:
1. servicePort(1) -When the port CAR mode is set to servicePort(1),
it indicates that CAR is performed based on the service port.
2. portCos(2) -When the port CAR mode is set to portCos(2), the traffic profile
referenced during the creation of the service port is invalid.
In this case, CAR is performed based on the priority of the packet on the port.
Default: servicePort(1)
"
::= { hwPortCarModeEntry 1 }
-- hwCosRemarkMask
hwCosRemarkMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As an independent leaf node, describes the mapping between CoS and remarked CoS.
The remarked CoS ID is 0-7. Every four bits represents the CoS ID to which a Cos corresponds.
When hwCosRemarkMask is set to 0xffffffff(4294967295), it means restoring it to default settings.
The default mapping is as follows: Packets with priority 7 join queue 7, packets with priority 6 join queue 6, and so on.
The corresponding bits are:
0111 0110 0101 0100 0011 0010 0001 0000
7 6 5 4 3 2 1 0
Default: 1985229328
"
::= { hwExtIpdslam 31 }
--hwTagTransformTable
hwTagTransformTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTagTransformEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to enable or disable the ability of the tag-transformation.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwExtIpdslam 32 }
hwTagTransformEntry OBJECT-TYPE
SYNTAX HwTagTransformEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to enable or disable the ability of the tag-transformation.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex,hwSlotIndex }
::= { hwTagTransformTable 1 }
HwTagTransformEntry ::=
SEQUENCE {
hwTagTransform
INTEGER
}
hwTagTransform OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the ability of the tag transformation.
Options:
1. disable(1) -Indicates that the board does not support tag transformation.
2. enable(2) -Indicates that the board supports tag transformation.
Default: disable(1)
"
::= { hwTagTransformEntry 1 }
--hwBoardMacLearningControlTable
hwBoardMacLearningControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBoardMacLearningControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to enable or disable the board MAC learning ability in each specified VLAN.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwExtIpdslam 33 }
hwBoardMacLearningControlEntry OBJECT-TYPE
SYNTAX HwBoardMacLearningControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to enable or disable the board MAC learning ability in each specified VLAN.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex,hwSlotIndex }
::= { hwBoardMacLearningControlTable 1 }
HwBoardMacLearningControlEntry ::=
SEQUENCE {
hwMacLearningControlArray
OCTET STRING
}
hwMacLearningControlArray OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (512..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bit 0 - 4095, each indicates the MAC learning ability in corresponding VLAN.
If bit 1000 is set to 0, it indicates that the MAC learning ability in VLAN 1000 is enabled,
and contrarily, if it is set to 1, that the MAC learning ability is disabled.
VLAN 0, 4094, 4095 and the system reserved VLANs cannot be set, the fixed value is 0.
The vlan starts from the least significant bit.
Default: enable(0)
"
::= { hwBoardMacLearningControlEntry 1 }
-- hwCosQueueDepthRateSlotTable
hwCosQueueDepthRateSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCosQueueDepthRateSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sets the depth of queue in the board.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwExtIpdslam 34 }
hwCosQueueDepthRateSlotEntry OBJECT-TYPE
SYNTAX HwCosQueueDepthRateSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sets the depth of queue in the board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwCosQueueDepthRateSlotTable 1 }
HwCosQueueDepthRateSlotEntry ::=
SEQUENCE {
hwCosQueueDepthRateSlotQue0
Integer32,
hwCosQueueDepthRateSlotQue1
Integer32,
hwCosQueueDepthRateSlotQue2
Integer32,
hwCosQueueDepthRateSlotQue3
Integer32,
hwCosQueueDepthRateSlotQue4
Integer32,
hwCosQueueDepthRateSlotQue5
Integer32,
hwCosQueueDepthRateSlotQue6
Integer32,
hwCosQueueDepthRateSlotQue7
Integer32,
hwCosQueueDepthRateSlotRowStatus
RowStatus
}
hwCosQueueDepthRateSlotQue0 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 0, that is, percentage of the buffer exclusively occupied by queue 0.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
The depth of queue 0 can also be configured in hwCosQueueDepthRateQue0 of hwCosQueueDepthRateTable in HUAWEI-ETHERLIKE-EXT-MIB.
The final status of the depth of queue 0 is determined by its global-level switch and board-level switch.
When the board-level switch isn't configured, global-level switch takes effect.
If board-level switch is configured, board-level switch takes effects.
"
::= { hwCosQueueDepthRateSlotEntry 1 }
hwCosQueueDepthRateSlotQue1 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 1, that is, percentage of the buffer exclusively occupied by queue 1.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
The depth of queue 1 can also be configured in hwCosQueueDepthRateQue1 of hwCosQueueDepthRateTable in HUAWEI-ETHERLIKE-EXT-MIB.
The final status of the depth of queue 1 is determined by its global-level switch and board-level switch.
When the board-level switch isn't configured, global-level switch takes effect.
If board-level switch is configured, board-level switch takes effects.
"
::= { hwCosQueueDepthRateSlotEntry 2 }
hwCosQueueDepthRateSlotQue2 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 2, that is, percentage of the buffer exclusively occupied by queue 2.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
The depth of queue 2 can also be configured in hwCosQueueDepthRateQue2 of hwCosQueueDepthRateTable in HUAWEI-ETHERLIKE-EXT-MIB.
The final status of the depth of queue 2 is determined by its global-level switch and board-level switch.
When the board-level switch isn't configured, global-level switch takes effect.
If board-level switch is configured, board-level switch takes effects.
"
::= { hwCosQueueDepthRateSlotEntry 3 }
hwCosQueueDepthRateSlotQue3 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 3, that is, percentage of the buffer exclusively occupied by queue 3.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
The depth of queue 3 can also be configured in hwCosQueueDepthRateQue3 of hwCosQueueDepthRateTable in HUAWEI-ETHERLIKE-EXT-MIB.
The final status of the depth of queue 3 is determined by its global-level switch and board-level switch.
When the board-level switch isn't configured, global-level switch takes effect.
If board-level switch is configured, board-level switch takes effects.
"
::= { hwCosQueueDepthRateSlotEntry 4 }
hwCosQueueDepthRateSlotQue4 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 4, that is, percentage of the buffer exclusively occupied by queue 4.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
The depth of queue 4 can also be configured in hwCosQueueDepthRateQue4 of hwCosQueueDepthRateTable in HUAWEI-ETHERLIKE-EXT-MIB.
The final status of the depth of queue 4 is determined by its global-level switch and board-level switch.
When the board-level switch isn't configured, global-level switch takes effect.
If board-level switch is configured, board-level switch takes effects.
"
::= { hwCosQueueDepthRateSlotEntry 5 }
hwCosQueueDepthRateSlotQue5 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 5, that is, percentage of the buffer exclusively occupied by queue 5.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
The depth of queue 5 can also be configured in hwCosQueueDepthRateQue5 of hwCosQueueDepthRateTable in HUAWEI-ETHERLIKE-EXT-MIB.
The final status of the depth of queue 5 is determined by its global-level switch and board-level switch.
When the board-level switch isn't configured, global-level switch takes effect.
If board-level switch is configured, board-level switch takes effects.
"
::= { hwCosQueueDepthRateSlotEntry 6 }
hwCosQueueDepthRateSlotQue6 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 6, that is, percentage of the buffer exclusively occupied by queue 6.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
The depth of queue 6 can also be configured in hwCosQueueDepthRateQue6 of hwCosQueueDepthRateTable in HUAWEI-ETHERLIKE-EXT-MIB.
The final status of the depth of queue 6 is determined by its global-level switch and board-level switch.
When the board-level switch isn't configured, global-level switch takes effect.
If board-level switch is configured, board-level switch takes effects.
"
::= { hwCosQueueDepthRateSlotEntry 7 }
hwCosQueueDepthRateSlotQue7 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth of queue 7, that is, percentage of the buffer exclusively occupied by queue 7.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
The depth of queue 7 can also be configured in hwCosQueueDepthRateQue7 of hwCosQueueDepthRateTable in HUAWEI-ETHERLIKE-EXT-MIB.
The final status of the depth of queue 7 is determined by its global-level switch and board-level switch.
When the board-level switch isn't configured, global-level switch takes effect.
If board-level switch is configured, board-level switch takes effects.
"
::= { hwCosQueueDepthRateSlotEntry 8 }
hwCosQueueDepthRateSlotRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status and is used for creating or deleting
a vlan connect item.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) are supported the set operation.
During query, active(1) is always returned for this leaf.
"
::= { hwCosQueueDepthRateSlotEntry 255 }
-- hwEarlyDropModeSlotTable
hwEarlyDropModeSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEarlyDropModeSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sets the early drop mode of the board.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwExtIpdslam 35 }
hwEarlyDropModeSlotEntry OBJECT-TYPE
SYNTAX HwEarlyDropModeSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sets the early drop mode of the board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwEarlyDropModeSlotTable 1 }
HwEarlyDropModeSlotEntry ::=
SEQUENCE {
hwEarlyDropModeSlot
INTEGER,
hwEarlyDropModeSlotRowStatus
RowStatus
}
hwEarlyDropModeSlot OBJECT-TYPE
SYNTAX INTEGER
{
priBase(1),
colorBase(2),
off(3),
colorWred(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Options:
1. priBase(1) -indicating priority-based early drop
2. colorBase(2) -indicating color-based early drop
3. off(3) -indicating disable the early drop function
4. colorWred(4) -indicating color-wred early drop
In the case of priority-based early drop, if packets with a specified priority reach the preset threshold (queue depth percentage)
of their destination queue, subsequent packets of the same priority will be dropped instead of entering the queue.
In the case of color-based early drop, you can configure and query early drop parameters of packets of different colors.
In the case of off, the early drop function is disabled.
In the case of color-wred early drop, packets with different colors will discard by WRED(weighted random early detection) strategy.
For example, you can configure and query the early drop lower threshold, early drop upper threshold, and early drop possibility of
green packets or yellow packets.
"
::= { hwEarlyDropModeSlotEntry 1 }
hwEarlyDropModeSlotRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status and is used for creating or deleting the early drop mode of the board.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) are supported the set operation.
During query, active(1) is always returned for this leaf.
"
::= { hwEarlyDropModeSlotEntry 255 }
-- hwEarlyDropColorBasedYellowThresholdTable
hwEarlyDropColorBasedYellowThresholdTable OBJECT IDENTIFIER ::= { hwExtIpdslam 36 }
hwEarlyDropColorBasedThresholdCos0 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 0.
When traffic with CoS 0 reaches this threshold, the packets that are marked to yellow will be discarded.
"
::= { hwEarlyDropColorBasedYellowThresholdTable 1 }
hwEarlyDropColorBasedThresholdCos1 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 1.
When traffic with CoS 1 reaches this threshold, the packets that are marked to yellow will be discarded.
"
::= { hwEarlyDropColorBasedYellowThresholdTable 2 }
hwEarlyDropColorBasedThresholdCos2 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 2.
When traffic with CoS 2 reaches this threshold, the packets that are marked to yellow will be discarded.
"
::= { hwEarlyDropColorBasedYellowThresholdTable 3 }
hwEarlyDropColorBasedThresholdCos3 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 3.
When traffic with CoS 3 reaches this threshold, the packets that are marked to yellow will be discarded.
"
::= { hwEarlyDropColorBasedYellowThresholdTable 4 }
hwEarlyDropColorBasedThresholdCos4 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 4.
When traffic with CoS 4 reaches this threshold, the packets that are marked to yellow will be discarded.
"
::= { hwEarlyDropColorBasedYellowThresholdTable 5 }
hwEarlyDropColorBasedThresholdCos5 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 5.
When traffic with CoS 5 reaches this threshold, the packets that are marked to yellow will be discarded.
"
::= { hwEarlyDropColorBasedYellowThresholdTable 6 }
hwEarlyDropColorBasedThresholdCos6 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 6.
When traffic with CoS 6 reaches this threshold, the packets that are marked to yellow will be discarded.
"
::= { hwEarlyDropColorBasedYellowThresholdTable 7 }
hwEarlyDropColorBasedThresholdCos7 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of CoS 7.
When traffic with CoS 7 reaches this threshold, the packets that are marked to yellow will be discarded.
"
::= { hwEarlyDropColorBasedYellowThresholdTable 8 }
hwCosGroupTblTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCosGroupTblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this table is hwCosGroupTblIndex.
This table describes the relationship between the CoS entry in the CoS-group table and the group of the entry.
It supports the query and set operations.
"
::= { hwExtIpdslam 37 }
hwCosGroupTblEntry OBJECT-TYPE
SYNTAX HwCosGroupTblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this entry is hwCosGroupTblIndex.
This table describes the relationship between the CoS entry in the CoS-group table and the group of the entry.
It supports the query and set operations.
"
INDEX { hwCosGroupTblIndex }
::= { hwCosGroupTblTable 1 }
HwCosGroupTblEntry ::=
SEQUENCE {
hwCosGroupTblIndex
Integer32,
hwCos0GroupIndex
Integer32,
hwCos1GroupIndex
Integer32,
hwCos2GroupIndex
Integer32,
hwCos3GroupIndex
Integer32,
hwCos4GroupIndex
Integer32,
hwCos5GroupIndex
Integer32,
hwCos6GroupIndex
Integer32,
hwCos7GroupIndex
Integer32
}
hwCosGroupTblIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CoS-group table index
Range: 1-16
"
::= { hwCosGroupTblEntry 1 }
hwCos0GroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoS group of CoS0
Range: 0-7
Default value: 0
"
::= { hwCosGroupTblEntry 2 }
hwCos1GroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoS group of CoS1
Range: 0-7
Default value: 1
"
::= { hwCosGroupTblEntry 3 }
hwCos2GroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoS group of CoS2
Range: 0-7
Default value: 2
"
::= { hwCosGroupTblEntry 4 }
hwCos3GroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoS group of CoS3
Range: 0-7
Default value: 3
"
::= { hwCosGroupTblEntry 5 }
hwCos4GroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoS group of CoS4
Range: 0-7
Default value: 4
"
::= { hwCosGroupTblEntry 6 }
hwCos5GroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoS group of CoS5
Range: 0-7
Default value: 5
"
::= { hwCosGroupTblEntry 7 }
hwCos6GroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoS group of CoS6
Range: 0-7
Default value: 6
"
::= { hwCosGroupTblEntry 8 }
hwCos7GroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoS group of CoS7
Range: 0-7
Default value: 7
"
::= { hwCosGroupTblEntry 9 }
-- hwCarPortCosGroupTable
hwCarPortCosGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCarPortCosGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to set, delete, and query the CoS-group table bound to the GEM port. The traffic profile can be used to limit the rate for the CoS group only after the GEM port is bound to the CoS-group table.
The indexes of this table are ifIndex, hwCosPortGroupExtPara1, and hwCosPortGroupExtPara2. The value 0x7FFFFFFF indicates that the index is invalid.
The binding between the GEM port and the CoS-group table can be set only when the board CAR mode is portCos(2).
"
::= { hwExtIpdslam 38 }
hwCarPortCosGroupEntry OBJECT-TYPE
SYNTAX HwCarPortCosGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to set, delete, and query the CoS-group table bound to the GEM port. The traffic profile can be used to limit the rate for the CoS group only after the GEM port is bound to the CoS-group table.
The indexes of this entry are ifIndex, hwCosPortGroupExtPara1, and hwCosPortGroupExtPara2. The value 0x7FFFFFFF indicates that the index is invalid.
The binding between the GEM port and the CoS-group table can be set only when the board CAR mode is portCos(2).
"
INDEX { ifIndex, hwCosPortGroupExtPara1, hwCosPortGroupExtPara2 }
::= { hwCarPortCosGroupTable 1 }
HwCarPortCosGroupEntry ::=
SEQUENCE {
hwCosPortGroupExtPara1
Integer32,
hwCosPortGroupExtPara2
Integer32,
hwCosPortGroupTableIndex
Integer32,
hwCosPortGroupRowStatus
RowStatus
}
hwCosPortGroupExtPara1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is one of table indexes. Its meaning varies with the GPON working mode.
When the GPON board works in the distributing mode, this leaf indicates the GEM port ID. When the GPON board works in the profile mode, this leaf indicates the ONT ID. The value 0x07FFFFFFF indicates that this leaf value is invalid.
"
::= { hwCarPortCosGroupEntry 1 }
hwCosPortGroupExtPara2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is one of table indexes. Its meaning varies with the GPON working mode.
When the GPON board works in the distributing mode, this leaf is meaningless and must use an invalid value. When the GPON board works in the profile mode, this leaf indicates the GEM index for bound GEM ports, and indicates the GEM ID for unbound GEM ports. The value 0x07FFFFFFF indicates that this leaf value is invalid.
"
::= { hwCarPortCosGroupEntry 2 }
hwCosPortGroupTableIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It describes the index of the CoS-group table bound to the GEM port.
Range: 1-16
This leaf must be set in the add and modify operations of the table, and is not required in the delete operation of the table.
"
::= { hwCarPortCosGroupEntry 3 }
hwCosPortGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
In creation, you must set this leaf to createAndGo(4) and must enter the cos-group-table index;
in deletion, set this leaf to destroy(6);
in query, this leaf is displayed as active(1).
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates creating
3. destroy(6) -indicates deleting
"
::= { hwCarPortCosGroupEntry 4 }
-- hwXponQueueShapingTable
hwXponQueueShapingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwXponQueueShapingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates XPON board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on XPON board.
The indexes of this table are hwXponQueueShapingIfIndex, hwXponQueueShapingOntId, hwXponQueueId and hwXponQueueDirection.
"
::= { hwExtIpdslam 39 }
hwXponQueueShapingEntry OBJECT-TYPE
SYNTAX HwXponQueueShapingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates XPON board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on XPON board.
The indexes of this entry are hwXponQueueShapingIfIndex, hwXponQueueShapingOntId, hwXponQueueId and hwXponQueueDirection.
"
INDEX { hwXponQueueShapingIfIndex, hwXponQueueShapingOntId, hwXponQueueId, hwXponQueueDirection }
::= { hwXponQueueShapingTable 1 }
HwXponQueueShapingEntry ::=
SEQUENCE {
hwXponQueueShapingIfIndex
Integer32,
hwXponQueueShapingOntId
Integer32,
hwXponQueueId
Integer32,
hwXponQueueDirection
INTEGER,
hwXponQueueShapingTrafficIndex
Integer32,
hwXponQueueShapingTrafficRowStatus
RowStatus
}
hwXponQueueShapingIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port index for configuring a queue shaping.
The index uniquely identifies a port.
The value and algorithm of this index are the same as those of the ifIndex.
"
::= { hwXponQueueShapingEntry 1 }
hwXponQueueShapingOntId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ONT ID for configuring a queue shaping.
"
::= { hwXponQueueShapingEntry 2 }
hwXponQueueId OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the queue ID for configuring a queue shaping.
Range: 0-7
"
::= { hwXponQueueShapingEntry 3 }
hwXponQueueDirection OBJECT-TYPE
SYNTAX INTEGER
{
outBound(1),
inBound(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the direction for configuring a queue shaping.
Currently the XPON board only supports outBound(1).
Options:
1. outBound(1) -indicates that the index of the IP traffic profile is used by downstream packets.
2. inBound(2) -indicates that the index of the IP traffic profile is used by upstream packets.
"
::= { hwXponQueueShapingEntry 4 }
hwXponQueueShapingTrafficIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile referenced by queue shaping."
::= { hwXponQueueShapingEntry 5 }
hwXponQueueShapingTrafficRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a queue shaping, set this leaf to createAndGo(4).
To delete a queue shaping, set this leaf to destroy(6).
When a queue shaping is queried, this leaf is displayed as active(1).
"
::= { hwXponQueueShapingEntry 6 }
-- hwEthQueueShapingTable
hwEthQueueShapingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEthQueueShapingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates etherner board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on etherner board.
The indexes of this table are hwEthQueueShapingIfIndex, hwEthQueueId and hwEthQueueDirection.
"
::= { hwExtIpdslam 40 }
hwEthQueueShapingEntry OBJECT-TYPE
SYNTAX HwEthQueueShapingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates etherner board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on etherner board.
The indexes of this entry are hwEthQueueShapingIfIndex, hwEthQueueId and hwEthQueueDirection.
"
INDEX { hwEthQueueShapingIfIndex, hwEthQueueId, hwEthQueueDirection }
::= { hwEthQueueShapingTable 1 }
HwEthQueueShapingEntry ::=
SEQUENCE {
hwEthQueueShapingIfIndex
Integer32,
hwEthQueueId
Integer32,
hwEthQueueDirection
INTEGER,
hwEthQueueShapingTrafficIndex
Integer32,
hwEthQueueShapingTrafficRowStatus
RowStatus
}
hwEthQueueShapingIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port index for configuring a queue shaping.
The index uniquely identifies a port.
The value and algorithm of this index are the same as those of the ifIndex.
"
::= { hwEthQueueShapingEntry 1 }
hwEthQueueId OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the queue ID for configuring a queue shaping.
Range: 0-7
"
::= { hwEthQueueShapingEntry 2 }
hwEthQueueDirection OBJECT-TYPE
SYNTAX INTEGER
{
outBound(1),
inBound(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the direction for configuring a queue shaping.
Options:
1. outBound(1) -indicates that the index of the IP traffic profile is used by downstream packets.
2. inBound(2) -indicates that the index of the IP traffic profile is used by upstream packets.
"
::= { hwEthQueueShapingEntry 3 }
hwEthQueueShapingTrafficIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic profile referenced by queue shaping."
::= { hwEthQueueShapingEntry 4 }
hwEthQueueShapingTrafficRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a queue shaping, set this leaf to createAndGo(4).
To delete a queue shaping, set this leaf to destroy(6).
When a queue shaping is queried, this leaf is displayed as active(1).
"
::= { hwEthQueueShapingEntry 5 }
hwTrafficTablePriorityMappingMode OBJECT-TYPE
SYNTAX INTEGER
{
userTos(1),
userDscp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic table prority mapping mode.
Options:
1. userTos(1) -indicates that the mapping mode is ToS to 802.1p.
2. userDscp(2) -indicates that the mapping mode is DSCP to 802.1p.
Default: userTos(1)
The mode is used for the boards which don't support ToS to 802.1p and DSCP to 802.1p concurrently
but support either ToS to 802.1p or DSCP to 802.1p.If the mode is configured with userTos, all
service flows on the boards are working with userTos mapping mode, even if the mapping mode of the
service flows on the boards are configured with userDscp.If the mode is configured with userDscp,
all service flows on the boards are working with userDscp mapping mode, even if the mapping mode of
the service flows on the boards are configured with userTos.
"
::= { hwExtIpdslam 41 }
hwMacAddressHashConfilictDetect OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch for MAC hash detect.
Options:
1. enable(1) -indicates the switch for MAC hash detect is enable
2. disable(2) -indicates the switch for MAC hash detect disable
Default: disable(2)
"
::= { hwExtIpdslam 42 }
-- hwE2ECcTable
hwE2ECcTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwE2ECcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates end to end congestion control.
It is used to enable or disable the end to end (E2E) congestion control function on a board.
If the E2E congestion control function is enabled, the buffer of the SCUH control board can be
expanded through configuring the buffer of the SPUA board.
In this way, packets can be saved in the buffer of the SPUA board but will not be discarded
if congestion occurs on the SCUH control board.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwExtIpdslam 43 }
hwE2ECcEntry OBJECT-TYPE
SYNTAX HwE2ECcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates end to end congestion control.
It is used to enable or disable the end to end (E2E) congestion control function on a board.
If the E2E congestion control function is enabled, the buffer of the SCUH control board can be
expanded through configuring the buffer of the SPUA board.
In this way, packets can be saved in the buffer of the SPUA board but will not be discarded
if congestion occurs on the SCUH control board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwE2ECcTable 1 }
HwE2ECcEntry ::=
SEQUENCE {
hwE2ECcSwitch
INTEGER,
hwE2ECcQueueBufferRaio0
Integer32,
hwE2ECcQueueBufferRaio1
Integer32,
hwE2ECcQueueBufferRaio2
Integer32,
hwE2ECcQueueBufferRaio3
Integer32,
hwE2ECcQueueBufferRaio4
Integer32,
hwE2ECcQueueBufferRaio5
Integer32,
hwE2ECcQueueBufferRaio6
Integer32,
hwE2ECcQueueBufferRaio7
Integer32,
hwE2ECcQueueBufferRaio8
Integer32,
hwE2ECcQueueBufferRaio9
Integer32,
hwE2ECcQueueBufferRaio10
Integer32,
hwE2ECcQueueBufferRaio11
Integer32,
hwE2ECcQueueBufferRaio12
Integer32,
hwE2ECcQueueBufferRaio13
Integer32,
hwE2ECcQueueBufferRaio14
Integer32,
hwE2ECcQueueBufferRaio15
Integer32
}
hwE2ECcSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
notSupport(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It is used to enable or disable the end to end (E2E) congestion control function on a board.
Options:
1. enabled(1) -enables the E2E congestion control function on a board
2. disabled(2) -disables the E2E congestion control function on a board
3. notSupport(-1) -indicates the board does not support this operation
"
::= { hwE2ECcEntry 1 }
hwE2ECcQueueBufferRaio0 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 0.
Range: 0-100
"
::= { hwE2ECcEntry 2 }
hwE2ECcQueueBufferRaio1 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 1.
Range: 0-100
"
::= { hwE2ECcEntry 3 }
hwE2ECcQueueBufferRaio2 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 2.
Range: 0-100
"
::= { hwE2ECcEntry 4 }
hwE2ECcQueueBufferRaio3 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 3.
Range: 0-100
"
::= { hwE2ECcEntry 5 }
hwE2ECcQueueBufferRaio4 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 4.
Range: 0-100
"
::= { hwE2ECcEntry 6 }
hwE2ECcQueueBufferRaio5 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 5.
Range: 0-100
"
::= { hwE2ECcEntry 7 }
hwE2ECcQueueBufferRaio6 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 6.
Range: 0-100
"
::= { hwE2ECcEntry 8 }
hwE2ECcQueueBufferRaio7 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 7.
Range: 0-100
"
::= { hwE2ECcEntry 9 }
hwE2ECcQueueBufferRaio8 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 8.
Range: 0-100
"
::= { hwE2ECcEntry 10 }
hwE2ECcQueueBufferRaio9 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 9.
Range: 0-100
"
::= { hwE2ECcEntry 11 }
hwE2ECcQueueBufferRaio10 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 10.
Range: 0-100
"
::= { hwE2ECcEntry 12 }
hwE2ECcQueueBufferRaio11 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 11.
Range: 0-100
"
::= { hwE2ECcEntry 13 }
hwE2ECcQueueBufferRaio12 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 12.
Range: 0-100
"
::= { hwE2ECcEntry 14 }
hwE2ECcQueueBufferRaio13 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 13.
Range: 0-100
"
::= { hwE2ECcEntry 15 }
hwE2ECcQueueBufferRaio14 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 14.
Range: 0-100
"
::= { hwE2ECcEntry 16 }
hwE2ECcQueueBufferRaio15 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the buffer size ratio of queue 15.
Range: 0-100
"
::= { hwE2ECcEntry 17 }
-- hwCarThresholdProfileTable
hwCarThresholdProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCarThresholdProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the car-threshold profile table.
It is used to add, query, modify, or delete the car-threshold profile.
The index of this table is hwCarThresholdProfileIndex."
::= { hwExtIpdslam 44 }
hwCarThresholdProfileEntry OBJECT-TYPE
SYNTAX HwCarThresholdProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the car-threshold profile table.
It is used to add, query, modify, or delete the car-threshold profile.
The index of this entry is hwCarThresholdProfileIndex."
INDEX { hwCarThresholdProfileIndex }
::= { hwCarThresholdProfileTable 1 }
HwCarThresholdProfileEntry ::=
SEQUENCE {
hwCarThresholdProfileIndex
Integer32,
hwCarThresholdProfileCos0
Integer32,
hwCarThresholdProfileCos1
Integer32,
hwCarThresholdProfileCos2
Integer32,
hwCarThresholdProfileCos3
Integer32,
hwCarThresholdProfileCos4
Integer32,
hwCarThresholdProfileCos5
Integer32,
hwCarThresholdProfileCos6
Integer32,
hwCarThresholdProfileCos7
Integer32,
hwCarThresholdProfileRowStatus
RowStatus
}
hwCarThresholdProfileIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table index.
Range: 1-4
"
::= { hwCarThresholdProfileEntry 1 }
hwCarThresholdProfileCos0 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of the mapping with Cos0.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the CAR threshold of yellow and green packets with Cos0.
Bits 8-15: indicate the CAR threshold of green packets with Cos0.
Bits 16-23: indicate the CAR threshold of yellow packets with Cos0.
Bit 24-31: indicate the color of packets whose CAR threshold is to be modified.
0: indicates that the CAR threshold of both yellow and green packets are modified (bits 0-7).
1: indicates that the CAR threshold of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 100
"
::= { hwCarThresholdProfileEntry 2 }
hwCarThresholdProfileCos1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of the mapping with Cos1.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the CAR threshold of yellow and green packets with Cos1.
Bits 8-15: indicate the CAR threshold of green packets with Cos1.
Bits 16-23: indicate the CAR threshold of yellow packets with Cos1.
Bit 24-31: indicate the color of packets whose CAR threshold is to be modified.
0: indicates that the CAR threshold of both yellow and green packets are modified (bits 0-7).
1: indicates that the CAR threshold of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 100
"
::= { hwCarThresholdProfileEntry 3 }
hwCarThresholdProfileCos2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of the mapping with Cos2.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the CAR threshold of yellow and green packets with Cos2.
Bits 8-15: indicate the CAR threshold of green packets with Cos2.
Bits 16-23: indicate the CAR threshold of yellow packets with Cos2.
Bit 24-31: indicate the color of packets whose CAR threshold is to be modified.
0: indicates that the CAR threshold of both yellow and green packets are modified (bits 0-7).
1: indicates that the CAR threshold of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 100
"
::= { hwCarThresholdProfileEntry 4 }
hwCarThresholdProfileCos3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of the mapping with Cos3.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the CAR threshold of yellow and green packets with Cos3.
Bits 8-15: indicate the CAR threshold of green packets with Cos3.
Bits 16-23: indicate the CAR threshold of yellow packets with Cos3.
Bit 24-31: indicate the color of packets whose CAR threshold is to be modified.
0: indicates that the CAR threshold of both yellow and green packets are modified (bits 0-7).
1: indicates that the CAR threshold of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 100
"
::= { hwCarThresholdProfileEntry 5 }
hwCarThresholdProfileCos4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of the mapping with Cos4.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the CAR threshold of yellow and green packets with Cos4.
Bits 8-15: indicate the CAR threshold of green packets with Cos4.
Bits 16-23: indicate the CAR threshold of yellow packets with Cos4.
Bit 24-31: indicate the color of packets whose CAR threshold is to be modified.
0: indicates that the CAR threshold of both yellow and green packets are modified (bits 0-7).
1: indicates that the CAR threshold of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 100
"
::= { hwCarThresholdProfileEntry 6 }
hwCarThresholdProfileCos5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of the mapping with Cos5.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the CAR threshold of yellow and green packets with Cos5.
Bits 8-15: indicate the CAR threshold of green packets with Cos5.
Bits 16-23: indicate the CAR threshold of yellow packets with Cos5.
Bit 24-31: indicate the color of packets whose CAR threshold is to be modified.
0: indicates that the CAR threshold of both yellow and green packets are modified (bits 0-7).
1: indicates that the CAR threshold of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 100
"
::= { hwCarThresholdProfileEntry 7 }
hwCarThresholdProfileCos6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of the mapping with Cos6.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the CAR threshold of yellow and green packets with Cos6.
Bits 8-15: indicate the CAR threshold of green packets with Cos6.
Bits 16-23: indicate the CAR threshold of yellow packets with Cos6.
Bit 24-31: indicate the color of packets whose CAR threshold is to be modified.
0: indicates that the CAR threshold of both yellow and green packets are modified (bits 0-7).
1: indicates that the CAR threshold of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 100
"
::= { hwCarThresholdProfileEntry 8 }
hwCarThresholdProfileCos7 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CAR threshold of the mapping with Cos7.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
----------------------------------------------------
| flag | yellow | green | green-and-yellow |
----------------------------------------------------
Bits 0-7: indicate the CAR threshold of yellow and green packets with Cos7.
Bits 8-15: indicate the CAR threshold of green packets with Cos7.
Bits 16-23: indicate the CAR threshold of yellow packets with Cos7.
Bit 24-31: indicate the color of packets whose CAR threshold is to be modified.
0: indicates that the CAR threshold of both yellow and green packets are modified (bits 0-7).
1: indicates that the CAR threshold of yellow and green packets are modified respectively
(bits 8-15 for green packets and bits 16-23 for yellow packets).
Other values are invalid.
Default: 100
"
::= { hwCarThresholdProfileEntry 9 }
hwCarThresholdProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status, used for creating or deleting a car-threshold profile.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a car-threshold profile, you must specify hwCarThresholdProfileIndex and set
hwCarThresholdProfileRowStatus to createAndGo(4) to perform the set operation.
Other attributes of the car-threshold profile are optional.
To delete a car-threshold profile, set hwCarThresholdProfileRowStatus to destroy(6) to
perform the set operation.
During query, the value of this leaf is the fixed active(1)."
::= { hwCarThresholdProfileEntry 10 }
hwTrafficLimitOntMode OBJECT-TYPE
SYNTAX INTEGER
{
shaping(1),
car(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of ONT Traffic limit.
Options:
1. shaping(1) -indicates the mode of ONT Traffic limit is shaping
2. car(2) -indicates the mode of ONT Traffic limit is CAR
Default: shaping(1)
"
::= { hwExtIpdslam 45 }
-- hwQosPolicyProfileTable
hwQosPolicyProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwQosPolicyProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the attributes of a QoS policy profile, used for adding or deleting
a QoS policy profile, or modifying the status of the attributes in an existing
QoS policy profile.
The index of this table is hwQosPolicyProfileName.
"
::= { hwExtIpdslam 46 }
hwQosPolicyProfileEntry OBJECT-TYPE
SYNTAX HwQosPolicyProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the attributes of a QoS policy profile, used for adding or deleting
a QoS policy profile, or modifying the status of the attributes in an existing
QoS policy profile.
The index of this entry is hwQosPolicyProfileName.
"
INDEX { hwQosPolicyProfileName }
::= { hwQosPolicyProfileTable 1 }
HwQosPolicyProfileEntry ::=
SEQUENCE {
hwQosPolicyProfileName
OCTET STRING,
hwProfileCosQueueMappingMask
Unsigned32,
hwProfileCosQueueSchedMode
INTEGER,
hwProfileCosQueueWeightQue0
Integer32,
hwProfileCosQueueWeightQue1
Integer32,
hwProfileCosQueueWeightQue2
Integer32,
hwProfileCosQueueWeightQue3
Integer32,
hwProfileCosQueueWeightQue4
Integer32,
hwProfileCosQueueWeightQue5
Integer32,
hwProfileCosQueueWeightQue6
Integer32,
hwProfileCosQueueWeightQue7
Integer32,
hwProfileCosQueueDepthRateQue0
Integer32,
hwProfileCosQueueDepthRateQue1
Integer32,
hwProfileCosQueueDepthRateQue2
Integer32,
hwProfileCosQueueDepthRateQue3
Integer32,
hwProfileCosQueueDepthRateQue4
Integer32,
hwProfileCosQueueDepthRateQue5
Integer32,
hwProfileCosQueueDepthRateQue6
Integer32,
hwProfileCosQueueDepthRateQue7
Integer32,
hwProfileCosQueueWREDIndexQue0
Integer32,
hwProfileCosQueueWREDIndexQue1
Integer32,
hwProfileCosQueueWREDIndexQue2
Integer32,
hwProfileCosQueueWREDIndexQue3
Integer32,
hwProfileCosQueueWREDIndexQue4
Integer32,
hwProfileCosQueueWREDIndexQue5
Integer32,
hwProfileCosQueueWREDIndexQue6
Integer32,
hwProfileCosQueueWREDIndexQue7
Integer32,
hwProfileCosQueueMaxBufferSizeQueue0
Integer32,
hwProfileCosQueueMaxBufferSizeQueue1
Integer32,
hwProfileCosQueueMaxBufferSizeQueue2
Integer32,
hwProfileCosQueueMaxBufferSizeQueue3
Integer32,
hwProfileCosQueueMaxBufferSizeQueue4
Integer32,
hwProfileCosQueueMaxBufferSizeQueue5
Integer32,
hwProfileCosQueueMaxBufferSizeQueue6
Integer32,
hwProfileCosQueueMaxBufferSizeQueue7
Integer32,
hwQosPolicyProfileRowStatus
RowStatus
}
hwQosPolicyProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name of the QoS policy profile.
Range: a string of 1-32 characters
The input index consists of the QoS policy profile name and
the length of the QoS policy profile name.
The input QoS policy profile name must be ASCII codes.
Assume that you need to create a huawei QoS policy profile.
Because the ASCII value of huawei is 104.117.97.119.101.105 and
the length of huawei is 6, the index is 6.104.117.97.119.101.105.
"
::= { hwQosPolicyProfileEntry 1 }
hwProfileCosQueueMappingMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As a table leaf node, describes the mapping between 802.1p priority and queue.
The queue ID is 0-7. Every four bits represents the queue ID to which an 802.1p priority corresponds.
When hwProfileCosQueueMappingMask is set to 0xffffffff(4294967295), it means restoring it to default settings.
The default mapping is as follows: Packets with priority 7 join queue 7, packets with priority 6 join queue 6, and so on.
The corresponding bits are:
0111 0110 0101 0100 0011 0010 0001 0000
7 6 5 4 3 2 1 0
Default: 1985229328
"
::= { hwQosPolicyProfileEntry 2 }
hwProfileCosQueueSchedMode OBJECT-TYPE
SYNTAX INTEGER
{
strictPriority(1),
wrr(2),
wfq(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the queue scheduling mode.
Options:
1. strictPriority(1) -PQ
2. wrr(2) -WRR
3. wfq(3) -WFQ
In the case of PQ scheduling, PQ takes out all packets from a queue with a high priority and transmits them.
After such a transmission is completed, PQ performs the same on all packets in a queue with an
intermediate priority,
a queue with a normal priority, and a queue with a low priority one by one.
In this way, packets in a queue with the highest priority precede packets in a queue with a less higher
priority and therefore are processed preferentially, even in case of congestion.
This ensures that packets for key services are processed first.
WRR and WFQ are of weighted scheduling type.
Unlike WRR, WFQ scheduling is based on byte quantity rather than packet quantity. This requires more
precise weight assignment.
"
::= { hwQosPolicyProfileEntry 3 }
hwProfileCosQueueWeightQue0 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 0.
Range: 0-100
When modifying the weight of queue 0, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwQosPolicyProfileEntry 4 }
hwProfileCosQueueWeightQue1 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 1.
Range: 0-100
When modifying the weight of queue 1, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwQosPolicyProfileEntry 5 }
hwProfileCosQueueWeightQue2 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 2.
Range: 0-100
When modifying the weight of queue 2, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwQosPolicyProfileEntry 6 }
hwProfileCosQueueWeightQue3 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 3.
Range: 0-100
When modifying the weight of queue 3, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwQosPolicyProfileEntry 7 }
hwProfileCosQueueWeightQue4 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 4.
Range: 0-100
When modifying the weight of queue 4, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwQosPolicyProfileEntry 8 }
hwProfileCosQueueWeightQue5 OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 5.
Range: 0-100
When modifying the weight of queue 5, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwQosPolicyProfileEntry 9 }
hwProfileCosQueueWeightQue6 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 6.
Range: 0-100
When modifying the weight of queue 6, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwQosPolicyProfileEntry 10 }
hwProfileCosQueueWeightQue7 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the weight of queue 7.
Range: 0-100
When modifying the weight of queue 7, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that the sum of weights is no bigger than 100.
"
::= { hwQosPolicyProfileEntry 11 }
hwProfileCosQueueDepthRateQue0 OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth rate of queue 0.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwQosPolicyProfileEntry 12 }
hwProfileCosQueueDepthRateQue1 OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth rate of queue 1.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwQosPolicyProfileEntry 13 }
hwProfileCosQueueDepthRateQue2 OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth rate of queue 2.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwQosPolicyProfileEntry 14 }
hwProfileCosQueueDepthRateQue3 OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth rate of queue 3.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwQosPolicyProfileEntry 15 }
hwProfileCosQueueDepthRateQue4 OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth rate of queue 4.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwQosPolicyProfileEntry 16 }
hwProfileCosQueueDepthRateQue5 OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth rate of queue 5.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwQosPolicyProfileEntry 17 }
hwProfileCosQueueDepthRateQue6 OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth rate of queue 6.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwQosPolicyProfileEntry 18 }
hwProfileCosQueueDepthRateQue7 OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the depth rate of queue 7.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a unified queue depth is issued for eight queues.
When setting the queue depth, enter at least 7 queues (0-6). The eighth queue depth is automatically calculated.
Value range for each queue is 0-100.
"
::= { hwQosPolicyProfileEntry 19 }
hwProfileCosQueueWREDIndexQue0 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile to be bound of queue 0.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop information).
At the same time, to bind queues to a WRED profile, make sure that hwEarlyDropMode be colorBase(2).
-1 indicates that the binding between queues and a WRED profile is removed.
Default: -1.
"
::= { hwQosPolicyProfileEntry 20 }
hwProfileCosQueueWREDIndexQue1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile to be bound of queue 1.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop information).
At the same time, to bind queues to a WRED profile, make sure that hwEarlyDropMode be colorBase(2).
-1 indicates that the binding between queues and a WRED profile is removed.
Default: -1.
"
::= { hwQosPolicyProfileEntry 21 }
hwProfileCosQueueWREDIndexQue2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile to be bound of queue 2.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop information).
At the same time, to bind queues to a WRED profile, make sure that hwEarlyDropMode be colorBase(2).
-1 indicates that the binding between queues and a WRED profile is removed.
Default: -1.
"
::= { hwQosPolicyProfileEntry 22 }
hwProfileCosQueueWREDIndexQue3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile to be bound of queue 3.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop information).
At the same time, to bind queues to a WRED profile, make sure that hwEarlyDropMode be colorBase(2).
-1 indicates that the binding between queues and a WRED profile is removed.
Default: -1.
"
::= { hwQosPolicyProfileEntry 23 }
hwProfileCosQueueWREDIndexQue4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile to be bound of queue 4.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop information).
At the same time, to bind queues to a WRED profile, make sure that hwEarlyDropMode be colorBase(2).
-1 indicates that the binding between queues and a WRED profile is removed.
Default: -1.
"
::= { hwQosPolicyProfileEntry 24 }
hwProfileCosQueueWREDIndexQue5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile to be bound of queue 5.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop information).
At the same time, to bind queues to a WRED profile, make sure that hwEarlyDropMode be colorBase(2).
-1 indicates that the binding between queues and a WRED profile is removed.
Default: -1.
"
::= { hwQosPolicyProfileEntry 25 }
hwProfileCosQueueWREDIndexQue6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile to be bound of queue 6.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop information).
At the same time, to bind queues to a WRED profile, make sure that hwEarlyDropMode be colorBase(2).
-1 indicates that the binding between queues and a WRED profile is removed.
Default: -1.
"
::= { hwQosPolicyProfileEntry 26 }
hwProfileCosQueueWREDIndexQue7 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a WRED profile to be bound of queue 7.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop information).
At the same time, to bind queues to a WRED profile, make sure that hwEarlyDropMode be colorBase(2).
-1 indicates that the binding between queues and a WRED profile is removed.
Default: -1.
"
::= { hwQosPolicyProfileEntry 27 }
hwProfileCosQueueMaxBufferSizeQueue0 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 0.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 0 is not configured.
"
::= { hwQosPolicyProfileEntry 28 }
hwProfileCosQueueMaxBufferSizeQueue1 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 1.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 1 is not configured.
"
::= { hwQosPolicyProfileEntry 29 }
hwProfileCosQueueMaxBufferSizeQueue2 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 2.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 2 is not configured.
"
::= { hwQosPolicyProfileEntry 30 }
hwProfileCosQueueMaxBufferSizeQueue3 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 3.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 3 is not configured.
"
::= { hwQosPolicyProfileEntry 31 }
hwProfileCosQueueMaxBufferSizeQueue4 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 4.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 4 is not configured.
"
::= { hwQosPolicyProfileEntry 32 }
hwProfileCosQueueMaxBufferSizeQueue5 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 5.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 5 is not configured.
"
::= { hwQosPolicyProfileEntry 33 }
hwProfileCosQueueMaxBufferSizeQueue6 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 6.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 6 is not configured.
"
::= { hwQosPolicyProfileEntry 34 }
hwProfileCosQueueMaxBufferSizeQueue7 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 7.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 7 is not configured.
"
::= { hwQosPolicyProfileEntry 35 }
hwQosPolicyProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status, used for creating or deleting a Qos policy profile.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a Qos policy profile, set hwQosPolicyProfileRowStatus to createAndGo(4)
to perform the set operation. The other leaves are optional.
To delete a Qos policy profile, set hwQosPolicyProfileRowStatus to
destroy(6) to perform the set operation.
To modify a Qos policy profile, you need not specify hwQosPolicyProfileRowStatus,
but perform the set operation directly on the leaf of the
corresponding attribute to be modified.
During query, the value of this leaf is the fixed active(1).
"
::= { hwQosPolicyProfileEntry 255 }
-- hwPortBindQosPolicyProfileTable
hwPortBindQosPolicyProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortBindQosPolicyProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for binding or unbinding a QoS policy profile to one port.
The index of this table is ifIndex, hwPortBindQosPolicyProfileSecondIndex, hwPortBindQosPolicyProfileThirdIndex.
"
::= { hwExtIpdslam 47 }
hwPortBindQosPolicyProfileEntry OBJECT-TYPE
SYNTAX HwPortBindQosPolicyProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for binding or unbinding a QoS policy profile to one port .
The index of this entry is ifIndex, hwPortBindQosPolicyProfileSecondIndex, hwPortBindQosPolicyProfileThirdIndex.
"
INDEX { ifIndex, hwPortBindQosPolicyProfileSecondIndex, hwPortBindQosPolicyProfileThirdIndex }
::= { hwPortBindQosPolicyProfileTable 1 }
HwPortBindQosPolicyProfileEntry ::=
SEQUENCE {
hwPortBindQosPolicyProfileSecondIndex
Integer32,
hwPortBindQosPolicyProfileThirdIndex
Integer32,
hwPortBindQosPolicyProfileName
OCTET STRING,
hwPortBindInboundQosPolicyProfileName
OCTET STRING
}
hwPortBindQosPolicyProfileSecondIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Reserved index, an invalid value needs to be input for this leaf.
The invalid value is defined as -1.
"
::= { hwPortBindQosPolicyProfileEntry 1 }
hwPortBindQosPolicyProfileThirdIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Reserved index, an invalid value needs to be input for this leaf.
The invalid value is defined as -1.
"
::= { hwPortBindQosPolicyProfileEntry 2 }
hwPortBindQosPolicyProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the QoS policy profile bound to a port in the outbound direction.
Range: a string of 0-32 characters
This leaf identifies a QoS policy profile, which must be
created in hwQosPolicyProfileTable. The null character string indicates
that the binding relation between a port and a QoS policy profile is deleted.
"
::= { hwPortBindQosPolicyProfileEntry 3 }
hwPortBindInboundQosPolicyProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the QoS policy profile bound to a port in the inbound direction.
Range: a string of 0-32 characters
This leaf identifies a QoS policy profile, which must be
created in hwQosPolicyProfileTable. The null character string indicates
that the binding relation between a port and a QoS policy profile is deleted.
"
::= { hwPortBindQosPolicyProfileEntry 4 }
hwMulticastQueuePriority OBJECT-TYPE
SYNTAX Integer32 (3..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority of multicast service queue.
"
::= { hwExtIpdslam 48 }
-- hwEarlyDropPriBaseMappingTable
hwEarlyDropPriBaseMappingTable OBJECT IDENTIFIER ::= { hwExtIpdslam 49 }
hwEarlyDropPriBaseMappingCos0 OBJECT-TYPE
SYNTAX INTEGER
{
class0(1),
class1(2),
class2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the pri-base early-drop mapping of cos0.
Options:
1. class0(1) -indicates class 0 of early-drop
2. class1(2) -indicates class 1 of early-drop
3. class2(3) -indicates class 2 of early-drop
Default: class0(1)
"
::= { hwEarlyDropPriBaseMappingTable 1 }
hwEarlyDropPriBaseMappingCos1 OBJECT-TYPE
SYNTAX INTEGER
{
class0(1),
class1(2),
class2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the pri-base early-drop mapping of cos1.
Options:
1. class0(1) -indicates class 0 of early-drop
2. class1(2) -indicates class 1 of early-drop
3. class2(3) -indicates class 2 of early-drop
Default: class0(1)
"
::= { hwEarlyDropPriBaseMappingTable 2 }
hwEarlyDropPriBaseMappingCos2 OBJECT-TYPE
SYNTAX INTEGER
{
class0(1),
class1(2),
class2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the pri-base early-drop mapping of cos2.
Options:
1. class0(1) -indicates class 0 of early-drop
2. class1(2) -indicates class 1 of early-drop
3. class2(3) -indicates class 2 of early-drop
Default: class0(1)
"
::= { hwEarlyDropPriBaseMappingTable 3 }
hwEarlyDropPriBaseMappingCos3 OBJECT-TYPE
SYNTAX INTEGER
{
class0(1),
class1(2),
class2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the pri-base early-drop mapping of cos3.
Options:
1. class0(1) -indicates class 0 of early-drop
2. class1(2) -indicates class 1 of early-drop
3. class2(3) -indicates class 2 of early-drop
Default: class0(1)
"
::= { hwEarlyDropPriBaseMappingTable 4 }
hwEarlyDropPriBaseMappingCos4 OBJECT-TYPE
SYNTAX INTEGER
{
class0(1),
class1(2),
class2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the pri-base early-drop mapping of cos4.
Options:
1. class0(1) -indicates class 0 of early-drop
2. class1(2) -indicates class 1 of early-drop
3. class2(3) -indicates class 2 of early-drop
Default: class0(1)
"
::= { hwEarlyDropPriBaseMappingTable 5 }
hwEarlyDropPriBaseMappingCos5 OBJECT-TYPE
SYNTAX INTEGER
{
class0(1),
class1(2),
class2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the pri-base early-drop mapping of cos5.
Options:
1. class0(1) -indicates class 0 of early-drop
2. class1(2) -indicates class 1 of early-drop
3. class2(3) -indicates class 2 of early-drop
Default: class0(1)
"
::= { hwEarlyDropPriBaseMappingTable 6 }
hwEarlyDropPriBaseMappingCos6 OBJECT-TYPE
SYNTAX INTEGER
{
class0(1),
class1(2),
class2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the pri-base early-drop mapping of cos6.
Options:
1. class0(1) -indicates class 0 of early-drop
2. class1(2) -indicates class 1 of early-drop
3. class2(3) -indicates class 2 of early-drop
Default: class0(1)
"
::= { hwEarlyDropPriBaseMappingTable 7 }
hwEarlyDropPriBaseMappingCos7 OBJECT-TYPE
SYNTAX INTEGER
{
class0(1),
class1(2),
class2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the pri-base early-drop mapping of cos7.
Options:
1. class0(1) -indicates class 0 of early-drop
2. class1(2) -indicates class 1 of early-drop
3. class2(3) -indicates class 2 of early-drop
Default: class0(1)
"
::= { hwEarlyDropPriBaseMappingTable 8 }
-- hwPortStatisticsExcludeMulticastQueueTable
hwPortStatisticsExcludeMulticastQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortStatisticsExcludeMulticastQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for setting exclude port multicase statistics queue ID.
The index of this table is hwFrameIndex, hwSlotIndex.
"
::= { hwExtIpdslam 50 }
hwPortStatisticsExcludeMulticastQueueEntry OBJECT-TYPE
SYNTAX HwPortStatisticsExcludeMulticastQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for setting exclude port multicase statistics queue ID.
The index of this entry is hwFrameIndex, hwSlotIndex.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwPortStatisticsExcludeMulticastQueueTable 1 }
HwPortStatisticsExcludeMulticastQueueEntry ::=
SEQUENCE {
hwPortStatisticsExcludeMulticastQueueID
Integer32
}
hwPortStatisticsExcludeMulticastQueueID OBJECT-TYPE
SYNTAX Integer32 (-1|0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify one queue from 0 to 7, port multicast yellow and green packet statistics will exclude the specified queue.
-1 means not specify multicast statistics queue, port yellow and green packet statistics will include queue from 0 to 7.
The default queue is 3.
"
::= { hwPortStatisticsExcludeMulticastQueueEntry 1 }
hwXponPortJumboEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwXponPortJumboEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the jumbo frames configuration table of a xPON port.
It is used for setting the jumbo frames of a xPON port.
The index of this table is ifIndex.
"
::= { hwExtIpdslam 51 }
hwXponPortJumboEnableEntry OBJECT-TYPE
SYNTAX HwXponPortJumboEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the jumbo frames configuration table of a xPON port.
It is used for setting the jumbo frames of a xPON port.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwXponPortJumboEnableTable 1 }
HwXponPortJumboEnableEntry ::=
SEQUENCE {
hwXponPortJumboEnable
INTEGER
}
hwXponPortJumboEnable OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable jumbo frames.
When the carriers' servers need to exchange a large amount of data with their devices,
operate this object to enable jumbo frames.
After the operation is executed successfully,
the corresponding port on the control board can transparently transmit the frames whose size is between 1600 bytes and 9216 bytes.
By default, the xPON port disable jumbo frames.
Options:
1. invalid(-1) -invalid
2. enabled(1) -enable the jumbo frames
3. disabled(2) -disabled the jumbo frames
"
::= { hwXponPortJumboEnableEntry 1 }
hwDscpToDscpMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDscpToDscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the DSCP to DSCP mapping table. This table is used to configure or query the mapping
between the DSCP and DSCP. It only supports the modify operation but not the create or delete operation.
The fist record of this table is the default record of the system and cannot be modified.
The index of this table is hwDscpToDscpMappingIndex.
"
::= { hwExtIpdslam 52 }
hwDscpToDscpMappingEntry OBJECT-TYPE
SYNTAX HwDscpToDscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the DSCP to DSCP mapping table. This table is used to configure or query the mapping
between the DSCP and DSCP. It only supports the modify operation but not the create or delete operation.
The fist record of this table is the default record of the system and cannot be modified.
The index of this entry is hwDscpToDscpMappingIndex.
"
INDEX { hwDscpToDscpMappingIndex }
::= { hwDscpToDscpMappingTable 1 }
HwDscpToDscpMappingEntry ::=
SEQUENCE {
hwDscpToDscpMappingIndex
Integer32,
hwDscpListMapToDscp0
OCTET STRING,
hwDscpListMapToDscp1
OCTET STRING,
hwDscpListMapToDscp2
OCTET STRING,
hwDscpListMapToDscp3
OCTET STRING,
hwDscpListMapToDscp4
OCTET STRING,
hwDscpListMapToDscp5
OCTET STRING,
hwDscpListMapToDscp6
OCTET STRING,
hwDscpListMapToDscp7
OCTET STRING,
hwDscpToDscpMapRowStatus
RowStatus
}
hwDscpToDscpMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the DSCP-to-DSCP mapping table.
Range: 1-4
By default, the system supports four DSCP-to-DSCP mapping tables.
"
::= { hwDscpToDscpMappingEntry 1 }
hwDscpListMapToDscp0 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 0 to 7 (from the left to the right) of a DSCP mapping.
The structure is as follows:
----------------------------------------------------
| 15 | 14-12 | 11-6 | 5-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 15: indicates the color type.
0: Bits 0-5 indicate the DSCP of yellow and green packets and bits 6-11 are ignored.
1: Bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 12-14 are reserved and always set to 0. Value 1 is invalid.
Bits 0-5: When bit 15 is 0, bits 0-5 indicate the DSCP of yellow and green packets;
when bit 15 is 1, bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 6-11: When bit 15 is 0, bits 6-11 are invalid. When bit 15 is 1, bits 6-11 indicate the DSCP of yellow packets.
"
::= { hwDscpToDscpMappingEntry 2 }
hwDscpListMapToDscp1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 8 to 15 (from the left to the right) of a DSCP mapping.
The structure is as follows:
----------------------------------------------------
| 15 | 14-12 | 11-6 | 5-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 15: indicates the color type.
0: Bits 0-5 indicate the DSCP of yellow and green packets and bits 6-11 are ignored.
1: Bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 12-14 are reserved and always set to 0. Value 1 is invalid.
Bits 0-5: When bit 15 is 0, bits 0-5 indicate the DSCP of yellow and green packets;
when bit 15 is 1, bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 6-11: When bit 15 is 0, bits 6-11 are invalid. When bit 15 is 1, bits 6-11 indicate the DSCP of yellow packets.
"
::= { hwDscpToDscpMappingEntry 3 }
hwDscpListMapToDscp2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 16 to 23 (from the left to the right) of a DSCP mapping.
The structure is as follows:
----------------------------------------------------
| 15 | 14-12 | 11-6 | 5-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 15: indicates the color type.
0: Bits 0-5 indicate the DSCP of yellow and green packets and bits 6-11 are ignored.
1: Bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 12-14 are reserved and always set to 0. Value 1 is invalid.
Bits 0-5: When bit 15 is 0, bits 0-5 indicate the DSCP of yellow and green packets;
when bit 15 is 1, bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 6-11: When bit 15 is 0, bits 6-11 are invalid. When bit 15 is 1, bits 6-11 indicate the DSCP of yellow packets.
"
::= { hwDscpToDscpMappingEntry 4 }
hwDscpListMapToDscp3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 24 to 31 (from the left to the right) of a DSCP mapping.
The structure is as follows:
----------------------------------------------------
| 15 | 14-12 | 11-6 | 5-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 15: indicates the color type.
0: Bits 0-5 indicate the DSCP of yellow and green packets and bits 6-11 are ignored.
1: Bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 12-14 are reserved and always set to 0. Value 1 is invalid.
Bits 0-5: When bit 15 is 0, bits 0-5 indicate the DSCP of yellow and green packets;
when bit 15 is 1, bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 6-11: When bit 15 is 0, bits 6-11 are invalid. When bit 15 is 1, bits 6-11 indicate the DSCP of yellow packets.
"
::= { hwDscpToDscpMappingEntry 5 }
hwDscpListMapToDscp4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 32 to 39 (from the left to the right) of a DSCP mapping.
The structure is as follows:
----------------------------------------------------
| 15 | 14-12 | 11-6 | 5-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 15: indicates the color type.
0: Bits 0-5 indicate the DSCP of yellow and green packets and bits 6-11 are ignored.
1: Bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 12-14 are reserved and always set to 0. Value 1 is invalid.
Bits 0-5: When bit 15 is 0, bits 0-5 indicate the DSCP of yellow and green packets;
when bit 15 is 1, bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 6-11: When bit 15 is 0, bits 6-11 are invalid. When bit 15 is 1, bits 6-11 indicate the DSCP of yellow packets.
"
::= { hwDscpToDscpMappingEntry 6 }
hwDscpListMapToDscp5 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 40 to 16 (from the left to the right) of a DSCP mapping.
The structure is as follows:
----------------------------------------------------
| 15 | 14-12 | 11-6 | 5-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 15: indicates the color type.
0: Bits 0-5 indicate the DSCP of yellow and green packets and bits 6-11 are ignored.
1: Bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 12-14 are reserved and always set to 0. Value 1 is invalid.
Bits 0-5: When bit 15 is 0, bits 0-5 indicate the DSCP of yellow and green packets;
when bit 15 is 1, bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 6-11: When bit 15 is 0, bits 6-11 are invalid. When bit 15 is 1, bits 6-11 indicate the DSCP of yellow packets.
"
::= { hwDscpToDscpMappingEntry 7 }
hwDscpListMapToDscp6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 47 to 54 (from the left to the right) of a DSCP mapping.
The structure is as follows:
----------------------------------------------------
| 15 | 14-12 | 11-6 | 5-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 15: indicates the color type.
0: Bits 0-5 indicate the DSCP of yellow and green packets and bits 6-11 are ignored.
1: Bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 12-14 are reserved and always set to 0. Value 1 is invalid.
Bits 0-5: When bit 15 is 0, bits 0-5 indicate the DSCP of yellow and green packets;
when bit 15 is 1, bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 6-11: When bit 15 is 0, bits 6-11 are invalid. When bit 15 is 1, bits 6-11 indicate the DSCP of yellow packets.
"
::= { hwDscpToDscpMappingEntry 8 }
hwDscpListMapToDscp7 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 55 to 63 (from the left to the right) of a DSCP mapping.
The structure is as follows:
----------------------------------------------------
| 15 | 14-12 | 11-6 | 5-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 15: indicates the color type.
0: Bits 0-5 indicate the DSCP of yellow and green packets and bits 6-11 are ignored.
1: Bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 12-14 are reserved and always set to 0. Value 1 is invalid.
Bits 0-5: When bit 15 is 0, bits 0-5 indicate the DSCP of yellow and green packets;
when bit 15 is 1, bits 0-5 indicate the DSCP of green packets and bits 6-11 indicate the DSCP of yellow packets.
Bits 6-11: When bit 15 is 0, bits 6-11 are invalid. When bit 15 is 1, bits 6-11 indicate the DSCP of yellow packets.
"
::= { hwDscpToDscpMappingEntry 9 }
hwDscpToDscpMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
It supports only the query function. active(1) is displayed in the query result.
Options:
1. active(1) -indicates the query operation
"
::= { hwDscpToDscpMappingEntry 10 }
hwDscpColorToPbitsMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDscpColorToPbitsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the color-DSCP-to-802.1p priority mapping profile.It is used to modify and query
the color-DSCP-to-802.1p priority mapping relationships in the system.
The index of this table is hwDscpColorToPbitsMappingIndex.
By default, the system supports four color-DSCP-to-802.1p priority mapping profiles.
These priority mapping tables can be queried or modified, but cannot be created or deleted.
The color-DSCP-to-802.1p priority mapping table with index 1 cannot be modified.
"
::= { hwExtIpdslam 53 }
hwDscpColorToPbitsMappingEntry OBJECT-TYPE
SYNTAX HwDscpColorToPbitsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the color-DSCP-to-802.1p priority mapping profile.It is used to modify and query
the color-DSCP-to-802.1p priority mapping relationships in the system.
The index of this entry is hwDscpColorToPbitsMappingIndex.
By default, the system supports four color-DSCP-to-802.1p priority mapping profiles.
These priority mapping tables can be queried or modified, but cannot be created or deleted.
The color-DSCP-to-802.1p priority mapping table with index 1 cannot be modified.
"
INDEX { hwDscpColorToPbitsMappingIndex }
::= { hwDscpColorToPbitsMappingTable 1 }
HwDscpColorToPbitsMappingEntry ::=
SEQUENCE {
hwDscpColorToPbitsMappingIndex
Integer32,
hwDscpColorListMapToPriority0
OCTET STRING,
hwDscpColorListMapToPriority1
OCTET STRING,
hwDscpColorListMapToPriority2
OCTET STRING,
hwDscpColorListMapToPriority3
OCTET STRING,
hwDscpColorListMapToPriority4
OCTET STRING,
hwDscpColorListMapToPriority5
OCTET STRING,
hwDscpColorListMapToPriority6
OCTET STRING,
hwDscpColorListMapToPriority7
OCTET STRING,
hwDscpColorToPbitsMapRowStatus
RowStatus
}
hwDscpColorToPbitsMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the color-DSCP-to-802.1p priority mapping table.
Range: 1-50
By default, the system supports fifty DSCP-to-DSCP priority mapping tables.
"
::= { hwDscpColorToPbitsMappingEntry 1 }
hwDscpColorListMapToPriority0 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 0 to 7 (from the left to the right) of a DSCP mapping. The structure is as follows:
----------------------------------------------------
| 7 | 6 | 5-3 | 2-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 7: indicates the color type.
0: Bits 0-2 indicate the priority of yellow and green packets and bits 3-5 are ignored.
1: Bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 6 are reserved and always set to 0. Value 1 is invalid.
Bits 0-2: When bit 15 is 0, bits 0-2 indicate the priority of yellow and green packets;
when bit 15 is 1, bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 3-5: When bit 15 is 0, bits 0-2 are invalid. When bit 7 is 1, bits 3-5 indicate the priority of yellow packets.
"
::= { hwDscpColorToPbitsMappingEntry 2 }
hwDscpColorListMapToPriority1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 8 to 15 (from the left to the right) of a DSCP mapping. The structure is as follows:
----------------------------------------------------
| 7 | 6 | 5-3 | 2-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 7: indicates the color type.
0: Bits 0-2 indicate the priority of yellow and green packets and bits 3-5 are ignored.
1: Bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 6 are reserved and always set to 0. Value 1 is invalid.
Bits 0-2: When bit 15 is 0, bits 0-2 indicate the priority of yellow and green packets;
when bit 15 is 1, bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 3-5: When bit 15 is 0, bits 0-2 are invalid. When bit 7 is 1, bits 3-5 indicate the priority of yellow packets.
"
::= { hwDscpColorToPbitsMappingEntry 3 }
hwDscpColorListMapToPriority2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 16 to 23 (from the left to the right) of a DSCP mapping. The structure is as follows:
----------------------------------------------------
| 7 | 6 | 5-3 | 2-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 7: indicates the color type.
0: Bits 0-2 indicate the priority of yellow and green packets and bits 3-5 are ignored.
1: Bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 6 are reserved and always set to 0. Value 1 is invalid.
Bits 0-2: When bit 15 is 0, bits 0-2 indicate the priority of yellow and green packets;
when bit 15 is 1, bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 3-5: When bit 15 is 0, bits 0-2 are invalid. When bit 7 is 1, bits 3-5 indicate the priority of yellow packets.
"
::= { hwDscpColorToPbitsMappingEntry 4 }
hwDscpColorListMapToPriority3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 24 to 31 (from the left to the right) of a DSCP mapping. The structure is as follows:
----------------------------------------------------
| 7 | 6 | 5-3 | 2-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 7: indicates the color type.
0: Bits 0-2 indicate the priority of yellow and green packets and bits 3-5 are ignored.
1: Bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 6 are reserved and always set to 0. Value 1 is invalid.
Bits 0-2: When bit 15 is 0, bits 0-2 indicate the priority of yellow and green packets;
when bit 15 is 1, bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 3-5: When bit 15 is 0, bits 0-2 are invalid. When bit 7 is 1, bits 3-5 indicate the priority of yellow packets.
"
::= { hwDscpColorToPbitsMappingEntry 5 }
hwDscpColorListMapToPriority4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 32 to 39 (from the left to the right) of a DSCP mapping. The structure is as follows:
----------------------------------------------------
| 7 | 6 | 5-3 | 2-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 7: indicates the color type.
0: Bits 0-2 indicate the priority of yellow and green packets and bits 3-5 are ignored.
1: Bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 6 are reserved and always set to 0. Value 1 is invalid.
Bits 0-2: When bit 15 is 0, bits 0-2 indicate the priority of yellow and green packets;
when bit 15 is 1, bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 3-5: When bit 15 is 0, bits 0-2 are invalid. When bit 7 is 1, bits 3-5 indicate the priority of yellow packets.
"
::= { hwDscpColorToPbitsMappingEntry 6 }
hwDscpColorListMapToPriority5 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 40 to 46 (from the left to the right) of a DSCP mapping. The structure is as follows:
----------------------------------------------------
| 7 | 6 | 5-3 | 2-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 7: indicates the color type.
0: Bits 0-2 indicate the priority of yellow and green packets and bits 3-5 are ignored.
1: Bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 6 are reserved and always set to 0. Value 1 is invalid.
Bits 0-2: When bit 15 is 0, bits 0-2 indicate the priority of yellow and green packets;
when bit 15 is 1, bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 3-5: When bit 15 is 0, bits 0-2 are invalid. When bit 7 is 1, bits 3-5 indicate the priority of yellow packets.
"
::= { hwDscpColorToPbitsMappingEntry 7 }
hwDscpColorListMapToPriority6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 47 to 54 (from the left to the right) of a DSCP mapping. The structure is as follows:
----------------------------------------------------
| 7 | 6 | 5-3 | 2-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 7: indicates the color type.
0: Bits 0-2 indicate the priority of yellow and green packets and bits 3-5 are ignored.
1: Bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 6 are reserved and always set to 0. Value 1 is invalid.
Bits 0-2: When bit 15 is 0, bits 0-2 indicate the priority of yellow and green packets;
when bit 15 is 1, bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 3-5: When bit 15 is 0, bits 0-2 are invalid. When bit 7 is 1, bits 3-5 indicate the priority of yellow packets.
"
::= { hwDscpColorToPbitsMappingEntry 8 }
hwDscpColorListMapToPriority7 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 55 to 63 (from the left to the right) of a DSCP mapping. The structure is as follows:
----------------------------------------------------
| 7 | 6 | 5-3 | 2-0 |
----------------------------------------------------
| flag | reserved | yellow | green-and-yellow |
| | | | or green |
----------------------------------------------------
Bit 7: indicates the color type.
0: Bits 0-2 indicate the priority of yellow and green packets and bits 3-5 are ignored.
1: Bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 6 are reserved and always set to 0. Value 1 is invalid.
Bits 0-2: When bit 15 is 0, bits 0-2 indicate the priority of yellow and green packets;
when bit 15 is 1, bits 0-2 indicate the priority of green packets and bits 3-5 indicate the priority of yellow packets.
Bits 3-5: When bit 15 is 0, bits 0-2 are invalid. When bit 7 is 1, bits 3-5 indicate the priority of yellow packets.
"
::= { hwDscpColorToPbitsMappingEntry 9 }
hwDscpColorToPbitsMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
It supports only the query function. active(1) is displayed in the query result.
Options:
1. active(1) -indicates the query operation
"
::= { hwDscpColorToPbitsMappingEntry 10 }
-- hwOntBindQosPolicyProfileTable
hwOntBindQosPolicyProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOntBindQosPolicyProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for binding or unbinding a QoS policy profile to the ONT.
The index of this table is ifIndex, hwOntBindQosPolicyProfileOntId.
"
::= { hwExtIpdslam 54 }
hwOntBindQosPolicyProfileEntry OBJECT-TYPE
SYNTAX HwOntBindQosPolicyProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for binding or unbinding a QoS policy profile to the ONT.
The index of this entry is ifIndex, hwOntBindQosPolicyProfileOntId.
"
INDEX { ifIndex, hwOntBindQosPolicyProfileOntId }
::= { hwOntBindQosPolicyProfileTable 1 }
HwOntBindQosPolicyProfileEntry ::=
SEQUENCE {
hwOntBindQosPolicyProfileOntId
Integer32,
hwOntBindQosPolicyProfileName
OCTET STRING
}
hwOntBindQosPolicyProfileOntId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ONT ID.
"
::= { hwOntBindQosPolicyProfileEntry 1 }
hwOntBindQosPolicyProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the QoS policy profile bound to the ONT.
Range: a string of 0-32 characters
This leaf identifies a QoS policy profile, which must be
created in hwQosPolicyProfileTable. The null character string indicates
that the binding relation between the ONT and the QoS policy profile is deleted.
"
::= { hwOntBindQosPolicyProfileEntry 2 }
-- 1.3.6.1.4.1.2011.5.14.3.55
hwUplinkSwitchNotify OBJECT IDENTIFIER ::= { hwExtIpdslam 55 }
-- 1.3.6.1.4.1.2011.5.14.3.55.1
hwUplinkSwitchNotifyConfig OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch of controlling sending gratuitous ARP packets in the upstream direction.
Options:
1. enable(1) -enables the uplink notify function.
2. disable(2) -disables the uplink notify function.
"
DEFVAL { disable }
::= { hwUplinkSwitchNotify 1 }
-- 1.3.6.1.4.1.2011.5.14.3.55.2
hwUplinkSwitchNotifyTimes OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Times of sending gratuitous ARP packets, igmp and mld report packets in the upstream direction."
DEFVAL { 1 }
::= { hwUplinkSwitchNotify 2 }
-- 1.3.6.1.4.1.2011.5.14.3.55.3
hwUplinkSwitchNotifyIpDetect OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch of detecting the bound IP address.
Options:
1. enable(1) -enables the bind ip detect function.
2. disable(2) -disables the bind ip detect function.
"
DEFVAL { disable }
::= { hwUplinkSwitchNotify 3 }
-- 1.3.6.1.4.1.2011.5.14.3.55.4
hwUplinkSwitchNotifyIpDetectTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwUplinkSwitchNotifyIpDetectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bound IP address list to be detected.
The index of this table is hwUplinkSwitchNotifyIpDetectServicePortIndex, hwUplinkSwitchNotifyIpDetectSubIndex.
"
::= { hwUplinkSwitchNotify 4 }
-- 1.3.6.1.4.1.2011.5.14.3.55.4.1
hwUplinkSwitchNotifyIpDetectEntry OBJECT-TYPE
SYNTAX HwUplinkSwitchNotifyIpDetectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bound IP address list to be detected.
The index of this entry is hwUplinkSwitchNotifyIpDetectServicePortIndex, hwUplinkSwitchNotifyIpDetectSubIndex.
"
INDEX { hwUplinkSwitchNotifyIpDetectServicePortIndex, hwUplinkSwitchNotifyIpDetectSubIndex }
::= { hwUplinkSwitchNotifyIpDetectTable 1 }
HwUplinkSwitchNotifyIpDetectEntry ::=
SEQUENCE {
hwUplinkSwitchNotifyIpDetectServicePortIndex
Integer32,
hwUplinkSwitchNotifyIpDetectSubIndex
Integer32,
hwUplinkSwitchNotifyIpDetectIpAddressType
InetAddressType,
hwUplinkSwitchNotifyIpDetectIpAddress
InetAddress,
hwUplinkSwitchNotifyIpDetectIpv6PrefixLength
Unsigned32,
hwUplinkSwitchNotifyIpDetectMac
MacAddress
}
-- 1.3.6.1.4.1.2011.5.14.3.55.4.1.1
hwUplinkSwitchNotifyIpDetectServicePortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the service port bound to a detected IP address.
The service port corresponding to this index must already be created in
hwExtSrvFlowEntry.
"
::= { hwUplinkSwitchNotifyIpDetectEntry 1 }
-- 1.3.6.1.4.1.2011.5.14.3.55.4.1.2
hwUplinkSwitchNotifyIpDetectSubIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is used for specifying the position on the service port for detecting the IP address.
"
::= { hwUplinkSwitchNotifyIpDetectEntry 2 }
-- 1.3.6.1.4.1.2011.5.14.3.55.4.1.3
hwUplinkSwitchNotifyIpDetectIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the IP address type to detect.
Options:
1. ipv4(1) -indicates that the IP address type is ipv4
2. ipv6(2) -indicates that the IP address type is ipv6
"
::= { hwUplinkSwitchNotifyIpDetectEntry 3 }
-- 1.3.6.1.4.1.2011.5.14.3.55.4.1.4
hwUplinkSwitchNotifyIpDetectIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the IP address to detect.
"
::= { hwUplinkSwitchNotifyIpDetectEntry 4 }
-- 1.3.6.1.4.1.2011.5.14.3.55.4.1.5
hwUplinkSwitchNotifyIpDetectIpv6PrefixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address mask length."
::= { hwUplinkSwitchNotifyIpDetectEntry 5 }
-- 1.3.6.1.4.1.2011.5.14.3.55.4.1.6
hwUplinkSwitchNotifyIpDetectMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address obtained in IP address detection."
::= { hwUplinkSwitchNotifyIpDetectEntry 6 }
-- 1.3.6.1.4.1.2011.5.14.3.55.5
hwUplinkSwitchNotifyConfigBtv OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch of controlling sending igmp and mld report packets in the upstream direction.
Options:
1. enable(1) -enables the uplink notify function.
2. disable(2) -disables the uplink notify function.
"
DEFVAL { disable }
::= { hwUplinkSwitchNotify 5 }
-- 1.3.6.1.4.1.2011.5.14.3.56
hwOnuSwitchNotify OBJECT IDENTIFIER ::= { hwExtIpdslam 56 }
-- 1.3.6.1.4.1.2011.5.14.3.56.1
hwOnuSwitchNotifyConfigIpv4 OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch of controlling sending gratuitous ARP packets for users after the protection group on the ONU uplink port is switched over.
Options:
1. enable(1) -enables the ONU switch notify function.
2. disable(2) -disables the ONU switch notify function.
Default: disable(2)
"
::= { hwOnuSwitchNotify 1 }
-- 1.3.6.1.4.1.2011.5.14.3.56.2
hwOnuSwitchNotifyConfigIpv6 OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch of controlling sending unsolicited NA packets for users after the protection group on the ONU uplink port is switched over.
Options:
1. enable(1) -enables the ONU switch notify function.
2. disable(2) -disables the ONU switch notify function.
Default: disable(2)
"
::= { hwOnuSwitchNotify 2 }
--hwIpTrafficNameToIndexTable
hwIpTrafficNameToIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIpTrafficNameToIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the traffic profile name-traffic profile index mapping table.
The index of this table is hwIpTrafficName.
"
::= { hwExtIpdslam 57 }
hwIpTrafficNameToIndexEntry OBJECT-TYPE
SYNTAX HwIpTrafficNameToIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the traffic profile name-traffic profile index mapping table.
The index of this entry is hwIpTrafficName.
"
INDEX { hwIpTrafficName }
::= { hwIpTrafficNameToIndexTable 1 }
HwIpTrafficNameToIndexEntry ::=
SEQUENCE {
hwIpTrafficNameToIndexIdx
Integer32
}
hwIpTrafficNameToIndexIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the corresponding index of a given traffic profile name.
The traffic profile name must have been created in hwIpTrafficParamTable.
"
::= { hwIpTrafficNameToIndexEntry 1 }
-- hwQueueMaxBufferSizeTable
hwQueueMaxBufferSizeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwQueueMaxBufferSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the maximum depth of a port queue or ONT queue configured based on boards.
The indexes of this table are hwFrameIndex, hwSlotIndex, and hwQueueMaxBufferSizeType.
"
::= { hwExtIpdslam 58 }
hwQueueMaxBufferSizeEntry OBJECT-TYPE
SYNTAX HwQueueMaxBufferSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the maximum depth of a port queue or ONT queue configured based on boards.
The indexes of this entry are hwFrameIndex, hwSlotIndex, and hwQueueMaxBufferSizeType.
"
INDEX { hwFrameIndex, hwSlotIndex, hwQueueMaxBufferSizeType }
::= { hwQueueMaxBufferSizeTable 1 }
HwQueueMaxBufferSizeEntry ::=
SEQUENCE {
hwQueueMaxBufferSizeType
INTEGER,
hwQueueMaxBufferSizeQueue0
Integer32,
hwQueueMaxBufferSizeQueue1
Integer32,
hwQueueMaxBufferSizeQueue2
Integer32,
hwQueueMaxBufferSizeQueue3
Integer32,
hwQueueMaxBufferSizeQueue4
Integer32,
hwQueueMaxBufferSizeQueue5
Integer32,
hwQueueMaxBufferSizeQueue6
Integer32,
hwQueueMaxBufferSizeQueue7
Integer32,
hwQueueMaxBufferSizeRowStatus
RowStatus
}
hwQueueMaxBufferSizeType OBJECT-TYPE
SYNTAX INTEGER
{
portQueue(0),
ontQueue(1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the type of the queue having the maximum depth based on boards.
Options:
1. portQueue(0) -Indicates the maximum queue depth of ports on a board.
2. ontQueue(1) -Indicates the maximum queue depth of onts on a board.
"
::= { hwQueueMaxBufferSizeEntry 1 }
hwQueueMaxBufferSizeQueue0 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 0 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 0 is not configured.
"
::= { hwQueueMaxBufferSizeEntry 2 }
hwQueueMaxBufferSizeQueue1 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 1 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 1 is not configured.
"
::= { hwQueueMaxBufferSizeEntry 3 }
hwQueueMaxBufferSizeQueue2 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 2 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 2 is not configured.
"
::= { hwQueueMaxBufferSizeEntry 4 }
hwQueueMaxBufferSizeQueue3 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 3 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 3 is not configured.
"
::= { hwQueueMaxBufferSizeEntry 5 }
hwQueueMaxBufferSizeQueue4 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 4 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 4 is not configured.
"
::= { hwQueueMaxBufferSizeEntry 6 }
hwQueueMaxBufferSizeQueue5 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 5 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 5 is not configured.
"
::= { hwQueueMaxBufferSizeEntry 7 }
hwQueueMaxBufferSizeQueue6 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 6 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 6 is not configured.
"
::= { hwQueueMaxBufferSizeEntry 8 }
hwQueueMaxBufferSizeQueue7 OBJECT-TYPE
SYNTAX Integer32 (-1|32..8192)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum depth of queue 7 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 7 is not configured.
"
::= { hwQueueMaxBufferSizeEntry 9 }
hwQueueMaxBufferSizeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status and is used for creating or deleting
a maximum depth of queue item.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) are supported the set operation.
During query, active(1) is always returned for this leaf.
"
::= { hwQueueMaxBufferSizeEntry 255 }
-- hwRateProfileTable
hwRateProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRateProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the rate profile.
It is used to add, query, modify, or delete an rate profile.
This table mainly involves configuring CAR parameters such as CIR, PIR,
CBS, and PBS.
The index of this table is hwRateProfileName.
"
::= {hwExtIpdslam 59 }
hwRateProfileEntry OBJECT-TYPE
SYNTAX HwRateProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the rate profile.
It is used to add, query, modify, or delete an rate profile.
This table mainly involves configuring CAR parameters such as CIR, PIR,
CBS, and PBS.
The index of this entry is hwRateProfileName.
"
INDEX { hwRateProfileName }
::= { hwRateProfileTable 1 }
HwRateProfileEntry ::=
SEQUENCE {
hwRateProfileName
OCTET STRING,
hwRateProfileRowStatus
RowStatus,
hwRateProfileCir
Integer32,
hwRateProfileCbs
Integer32,
hwRateProfilePir
Integer32,
hwRateProfilePbs
Integer32,
hwRateProfileFixBandWidth
Integer32,
hwRateProfileColorMode
INTEGER,
hwRateProfileCarThresholdProfileIndex
Integer32,
hwRateProfileCouplingFlag
INTEGER,
hwRateProfileIndex
Integer32
}
hwRateProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name of the rate profile.
Range: a string of 1-32 characters
The input index consists of the rate profile name and
the length of the rate profile name.
The input profile name must be ASCII codes.
Assume that you need to create a rate profile named huawei.
The ASCII value of huawei is 104.117.97.119.101.105 and
the length of huawei is 6; therefore, the index is 6.104.117.97.119.101.105.
"
::= { hwRateProfileEntry 1 }
hwRateProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
"
::= { hwRateProfileEntry 2 }
hwRateProfileCir OBJECT-TYPE
SYNTAX Integer32 (-1|0..10240000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the committed information RateProfile (CIR).
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
CIR is a mandatory parameter. This parameter must be an integer multiple of 64.
If the entered value is not an integer multiple of 64,
it rounds down to the nearest integer multiple of 64.
When the CIR value ranges from 0 to 63, value 0 takes effect. For boards that do not support the CIR with values less than 64, 64 takes effect if the configured value is less than 64.
-1 indicates CIR off.
"
::= { hwRateProfileEntry 3 }
hwRateProfileCbs OBJECT-TYPE
SYNTAX Integer32 (-1|0..1024000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the committed burst size (CBS).
Range: -1, 0-1024000000 bytes.
Unit: bytes.
CBS is an optional parameter. If the parameter is not specified,
it can be obtained by formula min(2000+cir*32,1024000000).
For boards that do not support CBS with values less than 2000, 2000 takes effect if the configured value is less than 2000.
-1 indicates CBS off.
"
::= { hwRateProfileEntry 4 }
hwRateProfilePir OBJECT-TYPE
SYNTAX Integer32 (-1|64..10240000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the peak information RateProfile (PIR).
Range: -1, 64-10240000 kbit/s.
Unit: kbit/s.
PIR is an optional parameter. If the parameter is not specified,
it can be obtained through formula max(min(2*cir,10240000),64).
The PIR must be greater than or equal to the CIR.
-1 indicates PIR off.
"
::= { hwRateProfileEntry 5 }
hwRateProfilePbs OBJECT-TYPE
SYNTAX Integer32 (-1|2000..1024000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the peak burst size (PBS).
Range: -1, 2000-1024000000 bytes.
Unit: bytes.
PBS is an optional parameter.If the parameter is not specified,
it can be obtained by formula min(2000+32*pir,1024000000).
-1 indicates PBS off.
"
::= { hwRateProfileEntry 6 }
hwRateProfileFixBandWidth OBJECT-TYPE
SYNTAX Integer32 (-1|0..10240000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the fixed bandwidth to be allocated by the DBA. This parameter takes effect to the E2E service flow only on a GPON board.
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
hwRateProfileFixBandWidth must be smaller than or equal to CIR.
-1 indicates fixed bandwidth is not supported.
"
::= { hwRateProfileEntry 7 }
hwRateProfileColorMode OBJECT-TYPE
SYNTAX INTEGER
{
colorBlind(1),
colorAware(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the color-aware mode of the Rate profile.
Options:
1. colorBlind(1) -Indicates color blind mode.
2. colorAware(2) -Indicates color aware mode.
Default: colorBlind(1)
"
::= { hwRateProfileEntry 8 }
hwRateProfileCarThresholdProfileIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the car-threshold profile of the Rate profile.
-1 indicates car-threshold profile is disabled.
"
::= { hwRateProfileEntry 9 }
hwRateProfileCouplingFlag OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Coupling Flag CF is set to either 0 or 1. The choice of the value for CF has the effect of controlling the volume of the yellow
Service Frames admitted to the network. When CF is set to 0, the long term average bit RateProfile of bytes in yellow service frames admitted
to the network is bounded by EIR which is equal to PIR-CIR. When CF is set to 1, the long term average bit RateProfile of bytes in yellow
Service Frames admitted to the network is bounded by PIR depending on volume of the offered green Service Frames.
In both cases the burst size of the yellow Service Frames admitted to the network is bounded which is equal to PIR-CIR.
Options:
1. disable(0) --disable the function of double-color.
2. enable(1) --enable the function of double-color.
Default: enable(1)
"
::= { hwRateProfileEntry 10 }
hwRateProfileIndex OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the rate profile.
Range: 1-256
"
::= { hwRateProfileEntry 11 }
-- hwQueuePolicyProfileTable
hwQueuePolicyProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwQueuePolicyProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the queue policy profile table. It is used to add, modify, query, or delete a queue policy profile.
The index of this table is hwQueuePolicyProfileIndex.
"
::= { hwExtIpdslam 60 }
hwQueuePolicyProfileEntry OBJECT-TYPE
SYNTAX HwQueuePolicyProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the queue policy profile table. It is used to add, modify, query, or delete a queue policy profile.
The index of this entry is hwQueuePolicyProfileIndex.
"
INDEX { hwQueuePolicyProfileIndex }
::= { hwQueuePolicyProfileTable 1 }
HwQueuePolicyProfileEntry ::=
SEQUENCE {
hwQueuePolicyProfileIndex
Unsigned32,
hwQueuePolicyProfilePrioritySource
INTEGER,
hwQueuePolicyProfilePriorityMappingIndex
Integer32,
hwQueuePolicyProfileDefaultQueueCos
Integer32,
hwQueuePolicyProfileRowStatus
RowStatus
}
hwQueuePolicyProfileIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the queue policy profile.
Range: 1-4
"
::= { hwQueuePolicyProfileEntry 1 }
hwQueuePolicyProfilePrioritySource OBJECT-TYPE
SYNTAX INTEGER
{
outer8021p(1),
inner8021p(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority source of the queue policy profile.
Options:
1. outer8021p(1) -indicates the priority source is outer 8021p.
2. inner8021p(2) -indicates the priority source is inner 8021p.
Default: outer8021p(1)
"
::= { hwQueuePolicyProfileEntry 2 }
hwQueuePolicyProfilePriorityMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mapping profile index of the queue policy profile.
Range: 1-8
Default: 1
"
::= { hwQueuePolicyProfileEntry 3 }
hwQueuePolicyProfileDefaultQueueCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the default priority of the queue policy profile.
Range: 0-7
Default: 0
"
::= { hwQueuePolicyProfileEntry 4 }
hwQueuePolicyProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
"
::= { hwQueuePolicyProfileEntry 5 }
-- hwPriorityGroupProfileTable
hwPriorityGroupProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPriorityGroupProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the priority group profile table. It is used to add, modify, query, or delete a priority group profile.
The index of this table is hwPriorityGroupProfileName.
"
::= { hwExtIpdslam 61 }
hwPriorityGroupProfileEntry OBJECT-TYPE
SYNTAX HwPriorityGroupProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the priority group profile table. It is used to add, modify, query, or delete a priority group profile.
The index of this entry is hwPriorityGroupProfileName.
"
INDEX { hwPriorityGroupProfileName }
::= { hwPriorityGroupProfileTable 1 }
HwPriorityGroupProfileEntry ::=
SEQUENCE {
hwPriorityGroupProfileName
OCTET STRING,
hwPriorityGroupProfilePrioritySource
INTEGER,
hwPriorityGroupProfilePriorityMappingIndex
Integer32,
hwPriorityGroupProfileDefaultGroupIndex
Integer32,
hwPriorityGroupProfileRowStatus
RowStatus,
hwPriorityGroupProfileGroup0RateProfileIndex
Integer32,
hwPriorityGroupProfileGroup1RateProfileIndex
Integer32,
hwPriorityGroupProfileGroup2RateProfileIndex
Integer32,
hwPriorityGroupProfileGroup3RateProfileIndex
Integer32,
hwPriorityGroupProfileGroup4RateProfileIndex
Integer32,
hwPriorityGroupProfileGroup5RateProfileIndex
Integer32,
hwPriorityGroupProfileGroup6RateProfileIndex
Integer32,
hwPriorityGroupProfileGroup7RateProfileIndex
Integer32
}
hwPriorityGroupProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name of the priority group profile.
Range: a string of 1-32 characters
The input index consists of the priority group profile name and
the length of the priority group profile name.
The input profile name must be ASCII codes.
Assume that you need to create a priority group profile named huawei.
The ASCII value of huawei is 104.117.97.119.101.105 and
the length of huawei is 6; therefore, the index is 6.104.117.97.119.101.105.
"
::= { hwPriorityGroupProfileEntry 1 }
hwPriorityGroupProfilePrioritySource OBJECT-TYPE
SYNTAX INTEGER
{
outer8021p(1),
inner8021p(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority source of the priority group profile.
Options:
1. outer8021p(1) -indicates the priority source is outer 8021p.
2. inner8021p(2) -indicates the priority source is inner 8021p.
Default: outer8021p(1)
"
::= { hwPriorityGroupProfileEntry 2 }
hwPriorityGroupProfilePriorityMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the CoS-group table index of the priority group profile.
Range: 1-8
Default: 1
"
::= { hwPriorityGroupProfileEntry 3 }
hwPriorityGroupProfileDefaultGroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the default group index of the priority group profile.
Range: 0-7
Default: 0
"
::= { hwPriorityGroupProfileEntry 4 }
hwPriorityGroupProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
"
::= { hwPriorityGroupProfileEntry 5 }
hwPriorityGroupProfileGroup0RateProfileIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the rate profile bound to Car-group 0.
-1 indicates priority group car is not configured.
"
::= { hwPriorityGroupProfileEntry 6 }
hwPriorityGroupProfileGroup1RateProfileIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the rate profile bound to Car-group 1.
-1 indicates priority group car is not configured.
"
::= { hwPriorityGroupProfileEntry 7 }
hwPriorityGroupProfileGroup2RateProfileIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the rate profile bound to Car-group 2.
-1 indicates priority group car is not configured.
"
::= { hwPriorityGroupProfileEntry 8 }
hwPriorityGroupProfileGroup3RateProfileIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the rate profile bound to Car-group 3.
-1 indicates priority group car is not configured.
"
::= { hwPriorityGroupProfileEntry 9 }
hwPriorityGroupProfileGroup4RateProfileIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the rate profile bound to Car-group 4.
-1 indicates priority group car is not configured.
"
::= { hwPriorityGroupProfileEntry 10 }
hwPriorityGroupProfileGroup5RateProfileIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the rate profile bound to Car-group 5.
-1 indicates priority group car is not configured.
"
::= { hwPriorityGroupProfileEntry 11 }
hwPriorityGroupProfileGroup6RateProfileIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the rate profile bound to Car-group 6.
-1 indicates priority group car is not configured.
"
::= { hwPriorityGroupProfileEntry 12 }
hwPriorityGroupProfileGroup7RateProfileIndex OBJECT-TYPE
SYNTAX Integer32(-1|1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the rate profile bound to Car-group 7.
-1 indicates priority group car is not configured.
"
::= { hwPriorityGroupProfileEntry 13 }
-- hwAutoDeleteUnusedProfileTable
hwAutoDeleteUnusedProfileTable OBJECT IDENTIFIER ::= { hwExtIpdslam 62 }
hwAutoDeleteUnusedProfileType OBJECT-TYPE
SYNTAX INTEGER
{
trafficTable(1),
rateProfile(2),
priorityGroupProfile(3),
invalidValue(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the profile type of deleting unused profile.
Options:
1. trafficTable(1) - Traffic table
2. rateProfile(2) - Rate profile
3. priorityGroupProfile(3) - Pririty group profile
4. invalidValue(-1) - Invalid value
"
::= { hwAutoDeleteUnusedProfileTable 1 }
hwAutoDeleteUnusedProfileOperType OBJECT-TYPE
SYNTAX INTEGER
{
first(1),
all(2),
invalidValue(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operation type of deleting unused profile.
Options:
1. first(1) - Delete first profile
2. all(2) - Delete all profile
3. invalidValue(-1) - Invalid value
"
::= { hwAutoDeleteUnusedProfileTable 2 }
-- hwPriorityGroupCarStatTable
hwPriorityGroupCarStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPriorityGroupCarStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for priority group car statistics collection.
Indicates the table that contains the configuration information of priority group car statistics. It is used to create, modify,
delete and query priority group car statistics.
The indexes of this table are hwPriorityGroupCarStatFlowIndex, hwPriorityGroupCarStatGroupIndex and hwPriorityGroupCarStatDirection.
"
::= { hwExtIpdslam 63 }
hwPriorityGroupCarStatEntry OBJECT-TYPE
SYNTAX HwPriorityGroupCarStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for priority group car statistics collection.
Indicates the table that contains the configuration information of priority group car statistics. It is used to create, modify,
delete and query priority group car statistics.
The indexes of this entry are hwPriorityGroupCarStatFlowIndex, hwPriorityGroupCarStatGroupIndex and hwPriorityGroupCarStatDirection.
"
INDEX { hwPriorityGroupCarStatFlowIndex, hwPriorityGroupCarStatDirection, hwPriorityGroupCarStatGroupIndex }
::= { hwPriorityGroupCarStatTable 1 }
HwPriorityGroupCarStatEntry ::=
SEQUENCE {
hwPriorityGroupCarStatFlowIndex
Integer32,
hwPriorityGroupCarStatDirection
INTEGER,
hwPriorityGroupCarStatGroupIndex
Integer32,
hwPriorityGroupCarStatRowStatus
RowStatus,
hwPriorityGroupCarStatCountClear
INTEGER,
hwPriorityGroupCarStatTimeoutDuration
Integer32,
hwPriorityGroupCarStatRunningStatus
INTEGER,
hwPriorityGroupCarStatDiscardPackets
Counter64,
hwPriorityGroupCarStatRemainTime
Integer32
}
hwPriorityGroupCarStatFlowIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service flow index, a unique value to identify a service flow.
"
::= { hwPriorityGroupCarStatEntry 1 }
hwPriorityGroupCarStatDirection OBJECT-TYPE
SYNTAX INTEGER
{
inbound(1),
outbound(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the direction of priority group car statistics.
Options:
1.inbound(1) - indicates the direction of priority group car statistics is inbound
2.outbound(2) - indicates the direction of priority group car statistics is outbound
"
::= { hwPriorityGroupCarStatEntry 2 }
hwPriorityGroupCarStatGroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the priority group index of priority group car statistics.
"
::= { hwPriorityGroupCarStatEntry 3 }
hwPriorityGroupCarStatRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
"
::= { hwPriorityGroupCarStatEntry 4 }
hwPriorityGroupCarStatCountClear OBJECT-TYPE
SYNTAX INTEGER
{
cleared(1),
nouse(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears extended statistics of a specified priority group car.
This node does not need to be specified during the start of extended statistics
collection for a priority group car.
Options:
1.cleared(1) - reset the statistic to the specified priority group car
2.nouse(2) - in the query operation, this leaf is fixed to nouse
"
::= { hwPriorityGroupCarStatEntry 5 }
hwPriorityGroupCarStatTimeoutDuration OBJECT-TYPE
SYNTAX Integer32(1..1440 | -1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the duration of the priority group-based CAR statistics.
-1 indicates the priority group-based CAR statistics dose not stop."
::= { hwPriorityGroupCarStatEntry 6 }
hwPriorityGroupCarStatRunningStatus OBJECT-TYPE
SYNTAX INTEGER
{
running(1),
timeout(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of statistics collection of a specified priority group car.
This node has two enumerated values: running and timeout.
Options:
1.running(1) -indicate the statistic to the specified priority group car is running
2.timeout(2) -indicate the statistic to the specified priority group car is time out
"
::= { hwPriorityGroupCarStatEntry 7 }
hwPriorityGroupCarStatDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded packets of a specified priority group car."
::= { hwPriorityGroupCarStatEntry 8 }
hwPriorityGroupCarStatRemainTime OBJECT-TYPE
SYNTAX Integer32(0..1440 | -1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remaining time for the priority group-based CAR statistics.
0 indicates starting priority group-based CAR statistics measurement overtime.
-1 indicates the priority group-based CAR statistics dose not stop."
::= { hwPriorityGroupCarStatEntry 9 }
hwTrafficInnerPriForceModify OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the enabling status of the inner priority marking mode of the traffic profile.
Options:
1. disable(1) -Indicates that the inner priority marking mode of the traffic profile is disabled
2. enable(2) -indicates that the inner priority marking mode of the traffic profile is enabled
Default: enable(2)
"
::= { hwExtIpdslam 64 }
hwShapingBurstSizeConfigMode OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of shaping burst-size configuration mode.
Options:
1. auto(1) -indicates the shaping burst-size configuration mode is auto.
2. manual(2) -indicates the shaping burst-size configuration mode is manual.
Default: auto(1)
"
::= { hwExtIpdslam 65 }
hwXponPortMtuTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwXponPortMtuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the MTU configuration table of a xPON port.
It is used for setting the MTU of a xPON port.
The index of this table is ifIndex.
"
::= { hwExtIpdslam 66 }
hwXponPortMtuEntry OBJECT-TYPE
SYNTAX HwXponPortMtuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the MTU configuration table of a xPON port.
It is used for setting the MTU of a xPON port.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwXponPortMtuTable 1 }
HwXponPortMtuEntry ::=
SEQUENCE {
hwXponPortMtu
Integer32
}
hwXponPortMtu OBJECT-TYPE
SYNTAX Integer32 (-1..0|1519..9280)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for setting the MTU of a xPON port.
0 indicates to restore the default value.
-1 indicates the value is invalid.
Range: -1-0, 1519-9280
"
::= { hwXponPortMtuEntry 1 }
--hwQueuePerformanceStatsTable begin
hwQueuePerformanceStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwQueuePerformanceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the information about packets passed or dropped by a queue on a port in a 15-minute or 24-hour statistical period and the information about passed bytes.
The indexes of this table are ifIndex,hwQueueId,hwQueueStatsIntervalType,and hwQueueStatsIntervalNumId.
"
::= { hwExtIpdslam 67 }
hwQueuePerformanceStatsEntry OBJECT-TYPE
SYNTAX HwQueuePerformanceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the information about packets passed or dropped by a queue on a port in a 15-minute or 24-hour statistical period and the information about passed bytes.
The indexes of this entry are ifIndex,hwQueueId,hwQueueStatsIntervalType,and hwQueueStatsIntervalNumId.
"
INDEX { hwQueueifIndex, hwQueueId, hwQueueStatsIntervalType, hwQueueStatsIntervalNumId }
::= { hwQueuePerformanceStatsTable 1 }
HwQueuePerformanceStatsEntry ::=
SEQUENCE {
hwQueueStatsIntervalType INTEGER,
hwQueueStatsIntervalNumId Integer32,
hwQueueStatsDroppedYellowNumber Counter64,
hwQueueStatsDroppedGreenNumber Counter64,
hwQueueStatsDroppedUnRecognizedColorNumber Counter64,
hwQueueStatsPassedNumber Counter64,
hwQueueStatsPassedBytes Counter64,
hwQueueStatsTimeElapsed Integer32,
hwQueueStatsValidInterval TruthValue,
hwQueueStatsStartTime DateAndTime,
hwQueueStatsPassedGreenBytes Counter64,
hwQueueStatsPassedGreenNumber Counter64,
hwQueueStatsPassedYellowBytes Counter64,
hwQueueStatsPassedYellowNumber Counter64
}
hwQueueStatsIntervalType OBJECT-TYPE
SYNTAX INTEGER
{
intervaltime15min(0),
everbefore(1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of queue Performance Statistic.
Options:
1. intervaltime15min(0) -current-15minutes or historic-15minutes
2. everbefore(1) -everbefore
"
::= { hwQueuePerformanceStatsEntry 1 }
hwQueueStatsIntervalNumId OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval number of queue Performance Statistic.
When hwQueueStatsIntervalType is intervaltime15min, 0 represents current 15 minutes interval.
"
::= { hwQueuePerformanceStatsEntry 2 }
hwQueueStatsDroppedYellowNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of dropped yellow packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.
"
::= { hwQueuePerformanceStatsEntry 3 }
hwQueueStatsDroppedGreenNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of dropped green packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.
"
::= { hwQueuePerformanceStatsEntry 4 }
hwQueueStatsDroppedUnRecognizedColorNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of dropped unrecognized color packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.
"
::= { hwQueuePerformanceStatsEntry 5 }
hwQueueStatsPassedNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through packets.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
'18446744073709551615' means invalid value.
"
::= { hwQueuePerformanceStatsEntry 6 }
hwQueueStatsPassedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through bytes.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
'18446744073709551615' means invalid value.
"
::= { hwQueuePerformanceStatsEntry 7 }
hwQueueStatsTimeElapsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time of the current interval.
'-1' means invalid value."
::= { hwQueuePerformanceStatsEntry 8 }
hwQueueStatsValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the interval number is valid."
::= { hwQueuePerformanceStatsEntry 9 }
hwQueueStatsStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Start time of the interval.
"
::= { hwQueuePerformanceStatsEntry 10 }
hwQueueStatsPassedGreenBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through bytes of green packets.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
'18446744073709551615' means invalid value.
"
::= { hwQueuePerformanceStatsEntry 11 }
hwQueueStatsPassedGreenNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through green packets.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
'18446744073709551615' means invalid value.
"
::= { hwQueuePerformanceStatsEntry 12 }
hwQueueStatsPassedYellowBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through bytes of yellow packets.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
'18446744073709551615' means invalid value.
"
::= { hwQueuePerformanceStatsEntry 13 }
hwQueueStatsPassedYellowNumber OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of pass-through yellow packets.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
'18446744073709551615' means invalid value.
"
::= { hwQueuePerformanceStatsEntry 14 }
--hwQueuePerformanceStatsTable end
-- hwLanBoardExtTable
hwExtLanBoard OBJECT IDENTIFIER ::= { hwEthernetPort 4 }
-- hwLanBoardExtTable
hwLanBoardExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwLanBoardExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Extended attribute table of LAN board.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwExtLanBoard 1 }
hwLanBoardExtEntry OBJECT-TYPE
SYNTAX HwLanBoardExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Extended attribute table of LAN board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwLanBoardExtTable 1 }
HwLanBoardExtEntry ::=
SEQUENCE {
hwLanBoardExtWorkMode
INTEGER,
hwLanBoardExtPriorityControl
INTEGER,
hwLanBoardExtMulticastControl
Integer32,
hwLanBoardExtUnknowncastControl
Integer32,
hwLanBoardExtLogicLoop
INTEGER,
hwLanBoardExtBroadcastControl
Integer32,
hwLanBoardExtLowPriorityRatio
Integer32,
hwLanBoardExtHighPriorityRatio
Integer32,
hwLanBoardExtGMIIPauseFrameControl
INTEGER,
hwLanBoardExtPriorityLevel
Integer32,
hwLanBoardExtPitpStatus
INTEGER,
hwLanBoardExtPitpEthernetType
Integer32,
hwLanBoardExtPitpPortTagType
Integer32,
hwLanBoardExtPitpInfoTagType
Integer32
}
hwLanBoardExtWorkMode OBJECT-TYPE
SYNTAX INTEGER
{
general(1),
ipdslam(2),
atmgroup(3),
ipcascade(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mode of the LAN board.
Options:
1. general(1) -Indicates normal mode, in which the chip of LSW works normally.
2. ipdslam(2) -Indicatse IPDSLAM mode, the VLAN function of LSW chip is replaced by logic.
3. atmgroup(3) -Indicatse ATM group mode, applied to the multicast of ATM mode,
which supports not only the VLAN connection from xDSL to the LAN board,
but also the connection between VLAN and other ATM ports in the LAN.
4. ipcascade(4) -Indicates IP cascade mode.
"
::= { hwLanBoardExtEntry 1 }
hwLanBoardExtPriorityControl OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the LAN board supports the function of priority control.
Options:
1. enabled(1) -Indicates the order of priority for each connection can also be specified.
2. disabled(2) -Indicates the order of priority for each connection can't also be specified.
"
::= { hwLanBoardExtEntry 2 }
hwLanBoardExtMulticastControl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The traffic suppression of broadcast packet, in unit of packet/second.
"
::= { hwLanBoardExtEntry 3 }
hwLanBoardExtUnknowncastControl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The traffic suppression of unknown unicast, in unit of packet/second.
"
::= { hwLanBoardExtEntry 4 }
hwLanBoardExtLogicLoop OBJECT-TYPE
SYNTAX INTEGER
{
noLoopback(1),
gmiiRemote(2),
utoipaRemote(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LAN board loopback mode.
Options:
1. noLoopback(1) -Cancel loopback.
2. gmiiRemote(2) -GMII remote loopback.
3. utoipaRemote(3) -UTOPIA remote loopback.
"
::= { hwLanBoardExtEntry 5 }
hwLanBoardExtBroadcastControl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Traffic suppression of broadcast packet control, in unit of packet/second.
"
::= { hwLanBoardExtEntry 6 }
hwLanBoardExtLowPriorityRatio OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default low priority use for filling 802.1p field in ethernet packet upstream."
::= { hwLanBoardExtEntry 7 }
hwLanBoardExtHighPriorityRatio OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default high priority use for filling 802.1p field in ethernet packet upstream."
::= { hwLanBoardExtEntry 8 }
hwLanBoardExtGMIIPauseFrameControl OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if the LAN board support the function of priority control.
Options:
1. enabled(1) -The LAN board can support the function of priority control.
2. disabled(2) -The LAN board can't support the function of priority control.
"
::= { hwLanBoardExtEntry 9 }
hwLanBoardExtPriorityLevel OBJECT-TYPE
SYNTAX Integer32 (0..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The level will limit for priority level, eg.level equal 2,so low priority scope is 0-2,
high priority scope is 3-7.
"
::= { hwLanBoardExtEntry 10 }
hwLanBoardExtPitpStatus OBJECT-TYPE
SYNTAX INTEGER
{
pitpoff(1),
pitpvmodeenable(2),
pitppmodeenable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PITP switch state.
Options:
1. pitpoff(1) -Indicates PITP vmode and pmode are both disable.
2. pitpvmodeenable(2) -Indicates PITP vmode enable.
3. pitppmodeenable(3) -Indicates PITP pmode enable.
"
DEFVAL { pitpoff }
::= { hwLanBoardExtEntry 11 }
hwLanBoardExtPitpEthernetType OBJECT-TYPE
SYNTAX Integer32 (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The ethernet protocol type of PITP PDU, the default is 0x8200.
"
DEFVAL { 33280 }
::= { hwLanBoardExtEntry 12 }
hwLanBoardExtPitpPortTagType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The port tag type of PITP PDU, the default is 0x0110.
"
DEFVAL { 272 }
::= { hwLanBoardExtEntry 13 }
hwLanBoardExtPitpInfoTagType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The infomation tag type of PITP PDU, the default is 0x0111.
"
DEFVAL { 273 }
::= { hwLanBoardExtEntry 14 }
-- traps
hwEthernetTraps OBJECT IDENTIFIER ::= { hwEthernetPort 10 }
hwEthernetTrapVarBindOids OBJECT IDENTIFIER ::= { hwEthernetTraps 0 }
hwEthernetCommonTraps OBJECT IDENTIFIER ::= { hwEthernetTraps 1 }
hwEthernetCommonTrapsOids OBJECT IDENTIFIER ::= { hwEthernetCommonTraps 0 }
hwEthernetGeneralVarBindOids OBJECT IDENTIFIER ::= { hwEthernetTrapVarBindOids 1 }
hwBitsPortStateChangeType OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Options:
1. up(1) -port state change to up from down
2. down(2) -port state change to down from up
"
::= { hwEthernetGeneralVarBindOids 1 }
hwBindResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The result of binding board.
0 means the result OK
1 means the result error
"
::= { hwEthernetGeneralVarBindOids 2 }
hwBindOperateFlag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The operate type of binding board.
1 means to create bind group
2 means to delete bind group
4 means to add bind group member
5 means to delete bind group member
"
::= { hwEthernetGeneralVarBindOids 3 }
hwPortSpeedType OBJECT-TYPE
SYNTAX INTEGER
{
ge(1),
fe(2),
ge10(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The switched speed type of port.
Options:
1. ge(1) -the switched speed type of port is ge
2. fe(2) -the switched speed type of port is fe
3. ge10(3) -the switched speed type of port is ge10
"
::= { hwEthernetGeneralVarBindOids 4 }
hwPortChangeState OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down (2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The state of the ETH port.
Options:
1. up(1) -port state change to up from down
2. down(2) -port state change to down from up
"
::= { hwEthernetGeneralVarBindOids 5 }
hwSrvOperType OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
modify(2),
delete(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The operation type of the traffic stream.
Options:
1. add(1) -means to create a traffic stream.
2. modify(2) -means to modify a traffic stream (this operation is not supported currently).
3. delete(3) -means to delete a traffic stream (this operation is not supported currently).
"
::= { hwEthernetGeneralVarBindOids 6 }
hwSrvAttrChangeType OBJECT-TYPE
SYNTAX BITS
{
tagRuleChanged(0),
adminStatusChanged(1),
inboundIndexChanged(2),
outboundIindexChanged(3),
inboundNameChanged(4),
outboundNameChanged(5),
upInnerVlanChanged(6),
upInnerPriorityChanged(7),
macLearnChanged(8),
descriptionChanged(9),
remoteDescriptionChanged(10),
ontPortlistChanged(11)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
It means to modify the mask corresponding to the traffic stream attribute.
Currently, multiple traffic stream attributes can be modified at a time.
The description for each BIT of the reported traffic stream attribute mask is as follows.
tagRuleChanged(0) -indicates to modify the VLAN tag transforming mode of the traffic stream.
adminStatusChanged(1) -indicates to modify the administration status of the traffic stream.
inboundIndexChanged(2) -indicates to modify the index of the inbound traffic profile referenced by the traffic stream.
outboundIindexChanged(3) -indicates to modify the index of the outbound traffic profile referenced by the traffic stream.
inboundNameChanged(4) -indicates to modify the name of the inbound traffic profile referenced by the traffic stream.
outboundNameChanged(5) -indicates to modify the name of the outbound traffic profile referenced by the traffic stream.
upInnerVlanChanged(6) -indicates to modify the network inner VLAN tag of the traffic stream.
upInnerPriorityChanged(7) -indicates to modify the inner VLAN priority of the traffic stream.
macLearnChanged(8) -indicates to modify the maximum number of learnable dynamic MAC addresses of the traffic stream.
descriptionChanged(9) -indicates to modify the description of the traffic stream.
remoteDescriptionChanged(10) -indicates to modify the remote description of the traffic stream.
ontPortlistChanged(11) -indicates to modify the ONT port list of the traffic stream.
The mask has 32 bits in total. Note that in a byte, the high bit indicates a small attribute value.
For example, if bit 1 is set to 1, this bit indicates adminStatusChanged.
---------------------------------------------------------------------
| bit0-bit11 | bit12-bit31 |
---------------------------------------------------------------------
| tagRuleChanged(0)--ontPortlistChanged(11) | Reserved |
---------------------------------------------------------------------
"
::= { hwEthernetGeneralVarBindOids 7 }
hwSrvFlowBundleChangedOperType OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
delete(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The service virtual port bundle operate type.
Options:
1. add(1) -indicates add the service virtual port bundle
2. delete(2) -indicates delete the service virtual port bundle
"
::= { hwEthernetGeneralVarBindOids 8 }
hwSrvFlowBundleChangedBundleStr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The service virtual port bundle index."
::= { hwEthernetGeneralVarBindOids 9 }
hwSrvFlowBundleChangedBundleType OBJECT-TYPE
SYNTAX INTEGER
{
byPbit(1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The service virtual port bundle type.
Currently, only one type is supported, that is, byPbit(1),
which indicates that the service flow bundle is for L3 access,
and that the service flows are classified for 802.1p(P-Bits) CoS purpose.
Options:
1. byPbit(1) -indicates that the service flow bundle is for L3 access
and that the service flows are classified for 802.1p(P-Bits) CoS purpose
"
::= { hwEthernetGeneralVarBindOids 10 }
hwSrvFlowBatOperType OBJECT-TYPE
SYNTAX INTEGER
{
batdeleteflow(1),
batdeleteflowdesc(2),
batdeleteflowremotedesc(3),
batmodifyflowmaxmacaddressnum(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The service virtual port bat operation type.
Options:
1. batdeleteflow(1) -indicates to batch deleting the service flow port
2. batdeleteflowdesc(2) -indicates to batch deleting the description of the service flow port
3. batdeleteflowremotedesc(3) -indicates to batch deleting the remote description of the service flow port
4. batmodifyflowmaxmacaddressnum(4) -indicates to batch modifying the mac-address max-mac-count of the service flow port
"
::= { hwEthernetGeneralVarBindOids 11 }
hwSrvFlowBatOperPara OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of service virtual port parameter.
Currently, only the value of the parameter is supported, that is, the mac-address max-mac-count
of the service flow port. When the hwSrvFlowBatOperType is batmodifyflowmaxmacaddressnum,the value of
hwSrvFlowBatOperPara is from 0 to 1023.Others, the value is invalid.
"
::= { hwEthernetGeneralVarBindOids 12 }
hwSrvFlowBatModiyNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The nueber of the service virtual port.
Currently, the max value of hwSrvFlowBatModiyNum is 256.
"
::= { hwEthernetGeneralVarBindOids 13 }
hwSrvFlowBatFlowIndexList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the list of service flow indexes, each index in the list identifies a service flow uniquely.
Currently, the max length of the list is 1024, including 256 flow indexes. Per flow index uses four bytes.
"
::= { hwEthernetGeneralVarBindOids 14 }
hwResourceOverloadAwareCurValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the current resource occupancy.
"
::= { hwEthernetGeneralVarBindOids 15 }
hwEthernetLoopbackTestResult OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
fail(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the result of loopback test.
Options:
1. success(1) -indicates that the result of loopback test is successful.
2. fail(2) -indicates that the result of loopback test is failed.
"
::= { hwEthernetGeneralVarBindOids 16 }
hwEthernetLoopbackTestTxFrames OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of transmitted frames.
"
::= { hwEthernetGeneralVarBindOids 17 }
hwEthernetLoopbackTestRxFrames OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of received frames.
"
::= { hwEthernetGeneralVarBindOids 18 }
hwEthernetLoopbackTestPacketLossRatio OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the ratio of packet loss.
Range: 0-100
"
::= { hwEthernetGeneralVarBindOids 19 }
hwEthernetMirrorDirection OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the direction of mirror.
Directions including egress, ingress and all are supported currently."
::= { hwEthernetGeneralVarBindOids 20 }
hwMirrorSrcPortDescription OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the description of the source port, with the format frameId/slotId/portid."
::= { hwEthernetGeneralVarBindOids 21 }
hwMirrorDstPortDescription OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the description of the destination port with the format frameId/slotId/portid or meth."
::= { hwEthernetGeneralVarBindOids 22 }
hwAutoServiceAddContent OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Contents for automatic service port creation upon an ONT being online."
::= { hwEthernetGeneralVarBindOids 23 }
hwAutoServiceProcResult OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Results for automatic service port creation upon an ONT being online."
::= { hwEthernetGeneralVarBindOids 24 }
hwMacAddressFlappingPortInfo OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Paras for MAC flapping."
::= { hwEthernetGeneralVarBindOids 25 }
hwFlappingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The flapping MAC address.
"
::= { hwEthernetGeneralVarBindOids 26 }
hwTrafficUpportMonitorUpstreamLast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Last Upstream Traffic.
"
::= { hwEthernetGeneralVarBindOids 27 }
hwTrafficUpportMonitorUpstream OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Current Upstream Traffic.
"
::= { hwEthernetGeneralVarBindOids 28 }
hwTrafficUpportMonitorDownstreamLast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Last Downstream Traffic.
"
::= { hwEthernetGeneralVarBindOids 29 }
hwTrafficUpportMonitorDownstream OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Current Downstream Traffic.
"
::= { hwEthernetGeneralVarBindOids 30 }
hwIpdslamDisplayLocationTrap NOTIFICATION-TYPE
OBJECTS {
hwIpdslamQryType ,
hwIpdslamQryCondition ,
ifIndex,
hwExtSrvFlowIndex,
hwVlanIndex,
hwIpdslamQryConditionFlowBundleIndex,
hwIpdslamQryConditionPwIndex,
hwIpdslamQryConditionOntId
}
STATUS current
DESCRIPTION
"Trap of display location query.
The trap that is generated when IP or MAC address changed."
::= { hwEthernetCommonTrapsOids 1 }
hwQryGlobalStatisticTrap NOTIFICATION-TYPE
OBJECTS {
hwActivedXdslPortNum ,
hwActivedOntNum ,
hwActivedEthPortNum,
hwUplinkPortUpKbps,
hwUplinkPortDownKbps,
hwUplinkPortUpBandwidthOccupancyRate,
hwUplinkPortDownBandwidthOccupancyRate,
hwXponUniPortUpKbps,
hwXponUniPortDownKbps,
hwUpLinkPortMCastUpPercent,
hwUpLinkPortBCastUpPercent,
hwUpLinkPortUCastUpPercent,
hwUpLinkPortMCastDownPercent,
hwUpLinkPortBCastDownPercent,
hwUpLinkPortUCastDownPercent
}
STATUS current
DESCRIPTION
"Trap of one key mode of query flow quantity.
The trap that is generated when query global statistics."
::= { hwEthernetCommonTrapsOids 2 }
hwBitsPortStatusChangeInfoTrap NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwBitsPortStateChangeType }
STATUS current
DESCRIPTION
" The trap generated when BITS port state changes"
::= { hwEthernetCommonTrapsOids 3 }
hwBindBoardOprateResultInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwBindResult,
hwBindOperateFlag,
hwFrameIndex,
hwSlotIndex,
hwFrameIndex,
hwSlotIndex
}
STATUS current
DESCRIPTION
" The trap generated when bind board or undo bind board, The first two FrameIndex And SlotIndex is Masterborad, and the other is SlaveBoard"
::= { hwEthernetCommonTrapsOids 4 }
hwPortSpeedTypeSwitchResultInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwPortSpeedType
}
STATUS current
DESCRIPTION
" The trap generated when port speed type switched"
::= { hwEthernetCommonTrapsOids 5 }
hwPortStateChangeInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwPortChangeState,
hwPortPrimaryStatus,
hwPortSecondaryStatus
}
STATUS current
DESCRIPTION
" This trap message is generated when the port status changes,
for example from up to down or from down to up. The parameter
information about the trap message describes the current status
of the link and the location where the trap message is generated.
"
::= { hwEthernetCommonTrapsOids 6 }
hwIpTrafficParamChangeTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwIpTrafficParamChangeCause,
hwIpTrafficIndex,
hwIpTrafficName,
hwIpTrafficCir,
hwIpTrafficCbs,
hwIpTrafficPir,
hwIpTrafficPbs,
hwIpTrafficParamPriority,
hwIpTrafficParamPriorityMappingPolicy,
hwIpTrafficPriorityPolicy,
hwIpTrafficCm,
hwIpTrafficColorPolicy,
hwIpTrafficFixBandWidth,
hwIpTrafficDSCP,
hwIpTrafficDSCPMappingIndex,
hwIpTrafficDropPrecedence,
hwIpTrafficColorDEI,
hwIpTrafficColorSource,
hwIpTrafficWrrWeightYellow,
hwIpTrafficWrrWeightGreen
}
STATUS current
DESCRIPTION
"The trap generated when ip traffic profile created, deleted or modified."
::= { hwEthernetCommonTrapsOids 7 }
hwPortAutounloopSwitchInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"A trap message is generated when the loopback on a port is canceled automatically."
::= { hwEthernetCommonTrapsOids 8 }
hwSrvAddInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwSrvOperType,
hwExtSrvFlowIndex,
hwExtSrvFlowMultiServiceType,
hwExtSrvFlowMultiServiceUserPara,
hwExtSrvFlowPara1,
hwExtSrvFlowPara2,
hwExtSrvFlowPara3,
hwExtSrvFlowPara4,
hwExtSrvFlowPara5,
hwExtSrvFlowParaType,
hwExtSrvFlowVlanid,
hwExtSrvFlowReceiveTrafficDescrIndex,
hwExtSrvFlowTransmitTrafficDescrIndex,
hwExtSrvFlowAdminStatus,
hwExtSrvFlowSimulationServiceType,
hwExtSrvFlowInboundTrafficTableName,
hwExtSrvFlowOutboundTrafficTableName,
hwExtSrvFlowInnerVlanId,
hwExtSrvFlowSourceType,
hwExtSrvFlowDestinationType,
hwExtSrvFlowSourceParaType,
hwExtSrvFlowSourcePara1,
hwExtSrvFlowSourcePara2,
hwExtSrvFlowSourcePara3,
hwExtSrvFlowSourcePara4,
hwExtSrvFlowSourcePara5,
hwExtSrvFlowSourceMultiServiceType,
hwExtSrvFlowSourceMultiServiceUserPara,
hwExtSrvFlowSourceInnerVlanId,
hwExtSrvFlowBundleIndex,
hwExtSrvFlowBundleMemberSortPara
}
STATUS current
DESCRIPTION
"This trap is sent when a traffic stream is set up."
::= { hwEthernetCommonTrapsOids 9 }
hwSrvDelInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwExtSrvFlowIndex
}
STATUS current
DESCRIPTION
"This trap is sent when a traffic stream is deleted."
::= { hwEthernetCommonTrapsOids 10 }
hwSrvAttrChangedInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwExtSrvFlowIndex,
hwSrvAttrChangeType,
hwExtSrvFlowTagTransform,
hwExtSrvFlowAdminStatus,
hwExtSrvFlowTransmitTrafficDescrIndex,
hwExtSrvFlowReceiveTrafficDescrIndex,
hwExtSrvFlowInboundTrafficTableName,
hwExtSrvFlowOutboundTrafficTableName,
hwExtSrvFlowNNIInnerVlanId,
hwExtSrvFlowNNIInnerPriority,
hwIpdslamConnectMaxMacLearn,
hwExtSrvFlowDescInfo,
hwExtSrvFlowRemoteDescInfo,
hwExtSrvFlowPara5
}
STATUS current
DESCRIPTION
"This trap is sent when the traffic stream attribute is modified."
::= { hwEthernetCommonTrapsOids 11 }
hwSrvFlowBundleTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwSrvFlowBundleChangedBundleStr,
hwSrvFlowBundleChangedBundleType,
hwSrvFlowBundleChangedOperType
}
STATUS current
DESCRIPTION
"The trap generated when service virtual port bundle created or deleted."
::= { hwEthernetCommonTrapsOids 12 }
hwSrvFlowBatModifyInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwSrvFlowBatOperType,
hwSrvFlowBatOperPara,
hwSrvFlowBatModiyNum,
hwSrvFlowBatFlowIndexList
}
STATUS current
DESCRIPTION
"The trap generated when service virtual port batch modifyed."
::= { hwEthernetCommonTrapsOids 13 }
hwEthernetLoopbackTestTrap NOTIFICATION-TYPE
OBJECTS {
ifIndex,
hwEthernetLoopbackTestResult,
hwEthernetLoopbackTestTxFrames,
hwEthernetLoopbackTestRxFrames,
hwEthernetLoopbackTestPacketLossRatio
}
STATUS current
DESCRIPTION
"This trap will be sent when a ethernet loopback test finished successfully. The trap shows the result of the loopback test."
::= { hwEthernetCommonTrapsOids 14 }
hwEthernetPortCfgChangeTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"The trap generated when ethernet port configuration modified."
::= { hwEthernetCommonTrapsOids 15 }
hwEthernetPortAggCfgChangeTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"The trap generated when a link-aggregation group of Ethernet ports is created, modified or deleted.
If you run this command with all specified, the system reports only one trap with hwPortIndex set to 255 for boards configured with link aggregation.
"
::= { hwEthernetCommonTrapsOids 16 }
hwEthernetAlarmTraps OBJECT IDENTIFIER ::= { hwEthernetTraps 2 }
hwEthernetAlarmTrapsOids OBJECT IDENTIFIER ::= { hwEthernetAlarmTraps 0 }
hwAlarmEthernetPortOffline NOTIFICATION-TYPE
OBJECTS { hwPortIndex }
STATUS current
DESCRIPTION
"Alarm description: port offline
explanation: LAN port offline, the line is not connected
resolving method: change the line or check the peer port
alarm description: the port is offline.
The trap generated when the port is offline.
"
::= { hwEthernetAlarmTrapsOids 1 }
hwAlarmEthernetPeerPortNoNeg NOTIFICATION-TYPE
OBJECTS { hwPortIndex }
STATUS current
DESCRIPTION
"Alarm description: peer port does not support auto-negotiation.
Explanation: this port is auto-negotiation alarm, while the peer port is non-auto-negotiation alarm.
Resolution: Modify the mode of the peer port as auto-negotiation, or set the mode of this port as the non-auto-negotiation mode. In addition, ensure that the parameters under the non-auto-negotiation mode are consistent with the peer port, including the duplex mode, the rate and whether to support PAUSE frame.
"
::= { hwEthernetAlarmTrapsOids 2 }
hwAlarmEthernetMacLost NOTIFICATION-TYPE
OBJECTS { hwSlotIndex, hwIpdslamConnectIndex }
STATUS current
DESCRIPTION
"Alarm description: MAC is lost
explanation: The user MAC connected with IP DSLAM is lost.
Resolution: Adjust the max MAC learning of PVC.
Because in the connection with IP DSLAM, the number of a PVC can learn is limited,the user MAC will be lost if the number is bigger than the limited number.
"
::= { hwEthernetAlarmTrapsOids 3 }
hwAlarmEthernetPortActive NOTIFICATION-TYPE
OBJECTS { hwPortIndex }
STATUS current
DESCRIPTION
"
This trap is sent when the LAN port has been actived from other state.
alarm description: port active
explanation: LAN port active
resolving method:No process to need
"
::= { hwEthernetAlarmTrapsOids 4 }
hwAlarmEthernetPortDeActive NOTIFICATION-TYPE
OBJECTS { hwPortIndex }
STATUS current
DESCRIPTION
"
This trap is sent when the lan port has been deactivated from other state.
alarm description: port deactivated
explanation: LAN port deactivated
resolving method:check port status is active
"
::= { hwEthernetAlarmTrapsOids 5 }
hwMacConflictTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex , --User-side FrameID(Type:integer)
hwSlotIndex , --User-side SlotID(Type:integer)
hwPortIndex, --User-side PortID(Type:integer)
hwFrameIndex, --Network-side FrameID(Type:integer)
hwSlotIndex, --Network-side SlotID(Type:integer)
hwPortIndex, --Network-side PortID(Type:integer)
hwConflictMacAddress, --MAC address(Type:String, Valur:0~32 length)
hwVlanIndex --VLAN ID(Type:integer)
}
STATUS current
DESCRIPTION
"When the source MAC got by non-network-side ports is the same as one learned by network-side ports,
this trap will be generated."
::= { hwEthernetAlarmTrapsOids 6 }
hwAlarmEthernetPortTransceiverTypeChange NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the transceiver type of the Ethernet port changes.
"
::= { hwEthernetAlarmTrapsOids 7 }
hwAlarmSoftwareVersionNotSame NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwSlotIndex }
STATUS current
DESCRIPTION
"Software versions of the boards to be bound are not the same.
The parameter information about the trap location where the
trap message is generated, The first hwSlotIndex indicate slot
ID of left board and second hwSlotIndex indicate slot ID of right board.
"
::= { hwEthernetAlarmTrapsOids 8 }
hwAlarmUpstreamPortConnectfail NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the upstream ethernet port connection fails or the state of it is abnormal.
"
::= { hwEthernetAlarmTrapsOids 9 }
hwAlarmLOLOccurInBITSInputPort NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the loss of link (LOL) occurs in the BITS input port.
"
::= { hwEthernetAlarmTrapsOids 10 }
hwAlarmEthernetPortStatusChanges NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the Ethernet port link status changes from up to down.
"
::= { hwEthernetAlarmTrapsOids 11 }
hwAlarmOpticalTransceiverAbsence NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the optical transceiver is absence.
"
::= { hwEthernetAlarmTrapsOids 12 }
hwAlarmLOSOccurs NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the LOS occurs on the Ethernet optical port.
"
::= { hwEthernetAlarmTrapsOids 13 }
hwAlarmLinkBetweenStackPortsFails NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex }
STATUS current
DESCRIPTION
"This trap is sent when the Link between stack ports fails.
"
::= { hwEthernetAlarmTrapsOids 14 }
hwAlarmUpstreamEthernetPortConnectRecover NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the upstream ethernet port connection failure recovers or the state of it is normal.
"
::= { hwEthernetAlarmTrapsOids 15 }
hwAlarmOpticalPortTemperatureRecover NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwOpticsTemperature }
STATUS current
DESCRIPTION
"This trap is sent when the temperature of the Ethernet optical port recovers to the normal range.
"
::= { hwEthernetAlarmTrapsOids 16 }
hwAlarmBITSInputRecover NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the BITS input port recovers from loss of link (LOL).
"
::= { hwEthernetAlarmTrapsOids 17 }
hwAlarmEthernetPortLinkStatusChange NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the Ethernet port link status changes from down to up.
"
::= { hwEthernetAlarmTrapsOids 18 }
hwAlarmOpticalTransceiverRecover NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the optical transceiver recovers to the normal state.
"
::= { hwEthernetAlarmTrapsOids 19 }
hwAlarmOpticalPortRecoverFromLOS NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the Ethernet optical port recovers from LOS.
"
::= { hwEthernetAlarmTrapsOids 20 }
hwAlarmLinkBetweenStackPortsRecover NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex }
STATUS current
DESCRIPTION
"This trap is sent when the link between stack ports on the boards to be bound returns to a normal status.
"
::= { hwEthernetAlarmTrapsOids 21 }
hwOpticsTxPowerOutOfRangeAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsPowerTxLowerThresholdValue,
hwOpticsPowerTxUpperThresholdValue,
hwOpticsTxPower
}
STATUS current
DESCRIPTION
"This trap is sent when the Tx power of the Ethernet optical port is out of the range."
::= { hwEthernetAlarmTrapsOids 22 }
hwOpticsTxPowerRestoreAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsPowerTxLowerThresholdValue,
hwOpticsPowerTxUpperThresholdValue,
hwOpticsTxPower
}
STATUS current
DESCRIPTION
"This trap is sent when the Tx power of the Ethernet optical port recovers to the normal range."
::= { hwEthernetAlarmTrapsOids 23 }
hwOpticsRxPowerOutOfRangeAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsPowerRxUpperThresholdValue,
hwOpticsPowerRxLowerThresholdValue,
hwOpticsRxPower
}
STATUS current
DESCRIPTION
"This trap is sent when the Rx power of the Ethernet optical port is out of the range."
::= { hwEthernetAlarmTrapsOids 24 }
hwOpticsRxPowerRestoreAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsPowerRxUpperThresholdValue,
hwOpticsPowerRxLowerThresholdValue,
hwOpticsRxPower
}
STATUS current
DESCRIPTION
"This trap is sent when the Rx power of the Ethernet optical port recovers to the normal range."
::= { hwEthernetAlarmTrapsOids 25 }
hwAlarmEthPoePowerHighFault NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the load power of the Power over Ethernet port exceeds the upper limit.
"
::= { hwEthernetAlarmTrapsOids 26 }
hwAlarmEthPoePowerHighRecover NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the load power of the Power over Ethernet port recovers.
"
::= { hwEthernetAlarmTrapsOids 27 }
hwAlarmEthPoeCurrHighFault NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the Overcurrent for the power supply of the Power over Ethernet port.
"
::= { hwEthernetAlarmTrapsOids 28 }
hwAlarmEthPoeCurrHighRecover NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the Overcurrent for the power supply of the Power over Ethernet port recovers.
"
::= { hwEthernetAlarmTrapsOids 29 }
hwAlarmEthernetPortAdminActivate NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the ETH port is activated.
"
::= { hwEthernetAlarmTrapsOids 30 }
hwAlarmEthernetPortAdminDeActivate NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the ETH port is deactivated.
"
::= { hwEthernetAlarmTrapsOids 31 }
hwAlarmEthPowerDyingGaspFault NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the remote device is powered off.
"
::= { hwEthernetAlarmTrapsOids 32 }
hwAlarmEthPowerDyingGaspRecover NOTIFICATION-TYPE
OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex }
STATUS current
DESCRIPTION
"This trap is sent when the remote device is powered on.
"
::= { hwEthernetAlarmTrapsOids 33 }
hwOpticsTemperatureOutOfRangeAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsTemperatureUpperThresholdValue,
hwOpticsTemperatureLowerThresholdValue,
hwOpticsTemperature
}
STATUS current
DESCRIPTION
"This trap is sent when the Temperature of the Ethernet optical port is out of the range."
::= { hwEthernetAlarmTrapsOids 34 }
hwOpticsTemperatureRestoreAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsTemperatureUpperThresholdValue,
hwOpticsTemperatureLowerThresholdValue,
hwOpticsTemperature
}
STATUS current
DESCRIPTION
"This trap is sent when the Temperature of the Ethernet optical port recovers to the normal range."
::= { hwEthernetAlarmTrapsOids 35 }
hwOpticsVoltageOutOfRangeAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsVoltageUpperThresholdValue,
hwOpticsVoltageLowerThresholdValue,
hwOpticsSupplyVoltage
}
STATUS current
DESCRIPTION
"This trap is sent when the Voltage of the Ethernet optical port is out of the range."
::= { hwEthernetAlarmTrapsOids 36 }
hwOpticsVoltageRestoreAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsVoltageUpperThresholdValue,
hwOpticsVoltageLowerThresholdValue,
hwOpticsSupplyVoltage
}
STATUS current
DESCRIPTION
"This trap is sent when the Voltage of the Ethernet optical port recovers to the normal range."
::= { hwEthernetAlarmTrapsOids 37 }
hwOpticsCurrentOutOfRangeAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsCurrentUpperThresholdValue,
hwOpticsCurrentLowerThresholdValue,
hwOpticsTxBiasCurrent
}
STATUS current
DESCRIPTION
"This trap is sent when the Current of the Ethernet optical port is out of the range."
::= { hwEthernetAlarmTrapsOids 38 }
hwOpticsCurrentRestoreAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsCurrentUpperThresholdValue,
hwOpticsCurrentLowerThresholdValue,
hwOpticsTxBiasCurrent
}
STATUS current
DESCRIPTION
"This trap is sent when the Current of the Ethernet optical port recovers to the normal range."
::= { hwEthernetAlarmTrapsOids 39 }
hwEthPerformanceStatisOutOfRangeAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwEthPMThresholdItem,
hwEthPMCurrentValue,
hwEthPMThresholdValue
}
STATUS current
DESCRIPTION
"This trap is sent when the Current alarm performance statistics of the Ethernet port is out of the range."
::= { hwEthernetAlarmTrapsOids 40 }
hwEthPerformanceStatisRestoreAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwEthPMThresholdItem,
hwEthPMCurrentValue,
hwEthPMThresholdValue
}
STATUS current
DESCRIPTION
"This trap is sent when the Current alarm performance statistics of the Ethernet port recovers to the normal range."
::= { hwEthernetAlarmTrapsOids 41 }
hwEthPerformanceStatisOutOfRangeWarningTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwEthPMThresholdItem,
hwEthPMCurrentValue,
hwEthPMThresholdValue
}
STATUS current
DESCRIPTION
"This trap is sent when the Current warning performance statistics of the Ethernet port is out of the range."
::= { hwEthernetAlarmTrapsOids 42 }
hwEthPerformanceStatisRestoreWarningTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwEthPMThresholdItem,
hwEthPMCurrentValue,
hwEthPMThresholdValue
}
STATUS current
DESCRIPTION
"This trap is sent when the Current warning performance statistics of the Ethernet port recovers to the normal range."
::= { hwEthernetAlarmTrapsOids 43 }
hwMacOverloadTrap NOTIFICATION-TYPE
OBJECTS {
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the MAC address occupancy in the system exceeds the upper threshold."
::= { hwEthernetAlarmTrapsOids 44 }
hwMacOverloadRestoreTrap NOTIFICATION-TYPE
OBJECTS {
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the MAC address occupancy in the system is lower than the lower threshold."
::= { hwEthernetAlarmTrapsOids 45 }
hwIPNeighbourHardwareOverloadTrap NOTIFICATION-TYPE
OBJECTS {
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the IP neighbour hardware occupancy in the system exceeds the upper threshold."
::= { hwEthernetAlarmTrapsOids 46 }
hwIPNeighbourHardwareOverloadRestoreTrap NOTIFICATION-TYPE
OBJECTS {
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the IP neighbour hardware occupancy in the system is lower than the lower threshold."
::= { hwEthernetAlarmTrapsOids 47 }
hwBindBoardReplaceErrorTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex
}
STATUS current
DESCRIPTION
"This trap is sent when one bind board has been replaced while the other one hasn't been replaced."
::= { hwEthernetAlarmTrapsOids 48 }
hwEnableMirrorPortTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwEthernetMirrorDirection
}
STATUS current
DESCRIPTION
"This trap is sent when a mirror port has been created.
1: hwFrameIndex -indicates the source frame index.
2: hwSlotIndex -indicates the source slot index.
3: hwPortIndex -indicates the source port index.
4: hwFrameIndex -indicates the destination frame index.
5: hwSlotIndex -indicates the destination slot index.
6: hwPortIndex -indicates the destination port index.
7: hwEthernetMirrorDirection -indicates the mirror direction.
"
::= { hwEthernetAlarmTrapsOids 49 }
hwDisableMirrorPortTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwEthernetMirrorDirection
}
STATUS current
DESCRIPTION
"This trap is sent when a mirror port has been cancelled.
1: hwFrameIndex -indicates the source frame index.
2: hwSlotIndex -indicates the source slot index.
3: hwPortIndex -indicates the source port index.
4: hwFrameIndex -indicates the destination frame index.
5: hwSlotIndex -indicates the destination slot index.
6: hwPortIndex -indicates the destination port index.
7: hwEthernetMirrorDirection -indicates the mirror direction.
"
::= { hwEthernetAlarmTrapsOids 50 }
hwBoardMacOverloadTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the MAC address occupancy on the board exceeds the upper threshold."
::= { hwEthernetAlarmTrapsOids 51 }
hwBoardMacOverloadRestoreTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the MAC address occupancy on the board is lower than the lower threshold."
::= { hwEthernetAlarmTrapsOids 52 }
hwEnableMirrorPortExtendTrap NOTIFICATION-TYPE
OBJECTS {
hwMirrorSrcPortDescription,
hwMirrorDstPortDescription,
hwEthernetMirrorDirection
}
STATUS current
DESCRIPTION
"This trap is sent when mirroring is configured by running the mirror port command in SU mode.
1: hwMirrorSrcPortDescription -indicates the description of the source port with the format frameId/slotId/portid.
2: hwMirrorDstPortDescription -indicates the description of the destination port with the format frameId/slotId/portid or meth.
3: hwEthernetMirrorDirection -indicates the mirror direction.
"
::= { hwEthernetAlarmTrapsOids 53 }
hwDisableMirrorPortExtendTrap NOTIFICATION-TYPE
OBJECTS {
hwMirrorSrcPortDescription,
hwMirrorDstPortDescription,
hwEthernetMirrorDirection
}
STATUS current
DESCRIPTION
"This trap is sent when mirroring is canceled by running the undo mirror port command in SU mode.
1: hwMirrorSrcPortDescription -indicates the description of the source port with the format frameId/slotId/portid.
2: hwMirrorDstPortDescription -indicates the description of the destination port with the format frameId/slotId/portid or meth.
3: hwEthernetMirrorDirection -indicates the mirror direction.
"
::= { hwEthernetAlarmTrapsOids 54 }
hwOpticsLaserTemperatureOutOfRangeAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsLaserTemperatureUpperThresholdValue,
hwOpticsLaserTemperatureLowerThresholdValue,
hwOpticsLaserTemperature
}
STATUS current
DESCRIPTION
"This trap is sent when the temperature of the Ethernet optical port laser is out of the range."
::= { hwEthernetAlarmTrapsOids 55 }
hwOpticsLaserTemperatureRestoreAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsLaserTemperatureUpperThresholdValue,
hwOpticsLaserTemperatureLowerThresholdValue,
hwOpticsLaserTemperature
}
STATUS current
DESCRIPTION
"This trap is sent when the temperature of the Ethernet optical port laser recovers within the normal range."
::= { hwEthernetAlarmTrapsOids 56 }
hwOpticsWavelengthOutOfRangeAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsWaveLengthUpperThresholdValue,
hwOpticsWaveLengthLowerThresholdValue,
hwOpticsWaveLength
}
STATUS current
DESCRIPTION
"This trap is sent when the wavelength sent by the optical module on the Ethernet port is out of the range."
::= { hwEthernetAlarmTrapsOids 57 }
hwOpticsWavelengthRestoreAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsWaveLengthUpperThresholdValue,
hwOpticsWaveLengthLowerThresholdValue,
hwOpticsWaveLength
}
STATUS current
DESCRIPTION
"This trap is sent when the wavelength sent by the optical module on the Ethernet port recovers within the normal range."
::= { hwEthernetAlarmTrapsOids 58 }
hwOpticTecCurrentOutOfRangeAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsTecCurrentUpperThresholdValue,
hwOpticsTecCurrentLowerThresholdValue,
hwOpticsTecCurrent
}
STATUS current
DESCRIPTION
"This trap is sent when the current of the thermoelectric cooler on the Ethernet optical port is out of the range."
::= { hwEthernetAlarmTrapsOids 59 }
hwOpticsTecCurrentRestoreAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOpticsTecCurrentUpperThresholdValue,
hwOpticsTecCurrentLowerThresholdValue,
hwOpticsTecCurrent
}
STATUS current
DESCRIPTION
"This trap is sent when the current of the thermoelectric cooler on the Ethernet optical port recovers within the normal range."
::= { hwEthernetAlarmTrapsOids 60 }
hwIPRouteHardwareOverloadTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the IP route hardware occupancy in the system exceeds the upper threshold."
::= { hwEthernetAlarmTrapsOids 61 }
hwIPRouteHardwareOverloadRestoreTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the IP route hardware occupancy in the system is lower than the lower threshold."
::= { hwEthernetAlarmTrapsOids 62 }
hwPortAutoServiceAddFailureTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOntIndex,
hwAutoServiceAddContent,
hwAutoServiceProcResult
}
STATUS current
DESCRIPTION
"Trap indicating that automatic service port creation upon an ONT being online fails."
::= { hwEthernetAlarmTrapsOids 63 }
hwPortAutoServiceParaIncorrectTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOntIndex,
hwAutoServiceProcResult
}
STATUS current
DESCRIPTION
"Trap indicating that parameters for automatic service port creation are incorrect."
::= { hwEthernetAlarmTrapsOids 64 }
hwPortCmtsFrameAddFailTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwOntIndex
}
STATUS current
DESCRIPTION
"This trap is sent when board resources are full and the extended frame cannot be added."
::= { hwEthernetAlarmTrapsOids 65 }
hwMacConflictNewTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex, --ID of the subrack which learned the MAC address(Type:integer)
hwSlotIndex, --ID of the slot which learned the MAC address(Type:integer)
hwPortIndex, --ID of the port which learned the MAC address(Type:integer)
hwExtSrvFlowIndex, --Index of the service port which learned the MAC address
hwFrameIndex, --ID of the subrack with the conflict MAC address(Type:integer)
hwSlotIndex, --ID of the slot with the conflict MAC address(Type:integer)
hwPortIndex, --ID of the port with the conflict MAC address(Type:integer)
hwExtSrvFlowIndex, --Index of the service port with the conflict MAC address
hwVlanIndex, --ID of the VLAN which learned the conflict MAC address(Type:integer)
hwConflictMacAddress --The conflict MAC address(Type:String, Valur:0~32 length)
}
STATUS current
DESCRIPTION
"When the source MAC got by a port is the same as one learnt by another, this trap will be generated.
When the port is configured with PW, hwExtSrvFlowIndex indicates PW index, and the values of hwFrameIndex,
hwSlotIndex and hwPortIndex are invalid value.
"
::= { hwEthernetAlarmTrapsOids 66 }
hwMacAddressFlappingOverTrap NOTIFICATION-TYPE
OBJECTS {
hwVlanIndex, --ID of the VLAN which learned the flapping MAC address(Type:integer)
hwFlappingMacAddress, --The flapping MAC address(Type:String, Valur:0~32 length)
hwMacAddressFlappingPortInfo --MAC Flapping Ports (Type:String)
}
STATUS current
DESCRIPTION
"When the number of flapping MAC addresses reaches or exceeds the preset upper threshold, this trap will be generated."
::= { hwEthernetAlarmTrapsOids 67 }
hwMacAddressFlappingOverRestoreTrap NOTIFICATION-TYPE
OBJECTS {
hwVlanIndex, --ID of the VLAN which learned the flapping MAC address(Type:integer)
hwFlappingMacAddress, --The flapping MAC address(Type:String, Valur:0~32 length)
hwMacAddressFlappingPortInfo --MAC Flapping Ports (Type:String)
}
STATUS current
DESCRIPTION
"When the number of flapping MAC addresses is smaller than or equal to the preset lower threshold, this trap will be generated."
::= { hwEthernetAlarmTrapsOids 68 }
hwMacLimitOverflowTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"When the number of learnable MAC addresses of this port reaches the limit, this trap will be generated."
::= { hwEthernetAlarmTrapsOids 69 }
hwMacLimitOverflowRecoverTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"When the number of learnable MAC addresses of this port recovery normal, this trap will be generated."
::= { hwEthernetAlarmTrapsOids 70 }
hwUpstreamDecreaseRecordTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwDslamTrafficUpportMonitorThreshold,
hwTrafficUpportMonitorUpstreamLast,
hwTrafficUpportMonitorUpstream,
hwTrafficUpportMonitorDownstreamLast,
hwTrafficUpportMonitorDownstream
}
STATUS current
DESCRIPTION
"When the number of reduced upstream traffic by the specified uplink-port exceeds the
specified threshold, this trap will be generated."
::= { hwEthernetAlarmTrapsOids 71 }
hwDownstreamDecreaseRecordTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwDslamTrafficUpportMonitorThreshold,
hwTrafficUpportMonitorUpstreamLast,
hwTrafficUpportMonitorUpstream,
hwTrafficUpportMonitorDownstreamLast,
hwTrafficUpportMonitorDownstream
}
STATUS current
DESCRIPTION
"When the number of reduced downstream traffic by the specified uplink-port exceeds the
specified threshold, this trap will be generated."
::= { hwEthernetAlarmTrapsOids 72 }
hwStreamDecreaseRecordTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwDslamTrafficUpportMonitorThreshold,
hwTrafficUpportMonitorUpstreamLast,
hwTrafficUpportMonitorUpstream,
hwTrafficUpportMonitorDownstreamLast,
hwTrafficUpportMonitorDownstream
}
STATUS current
DESCRIPTION
"When the number of reduced upstream and downstream traffic by the specified uplink-port exceeds the
specified threshold, this trap will be generated."
::= { hwEthernetAlarmTrapsOids 73 }
--hwPacketAttackTrap begin
hwPacketAttackTrap NOTIFICATION-TYPE
OBJECTS {
hwPacketAttackMACAddress,
hwPacketNumberOfMACAddress,
hwPacketAttackPacketType,
hwPacketNumberOfPacketType
}
STATUS current
DESCRIPTION
"The system records packet statistics based on port and protocol type when the current CPU usage exceeds the packet detection threshold."
::= { hwEthernetAlarmTrapsOids 74 }
--hwPacketAttackTrap end
hwInnerForwardingFaultAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwFrameIndex,
hwSlotIndex
}
STATUS current
DESCRIPTION
"When the inner forwarding fault occurs, this trap will be generated."
::= { hwEthernetAlarmTrapsOids 75 }
hwInnerForwardingRecoverAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwFrameIndex,
hwSlotIndex
}
STATUS current
DESCRIPTION
"When the inner forwarding recovery occurs, this trap will be generated."
::= { hwEthernetAlarmTrapsOids 76 }
hwDslamNonUnicastUpportMonitorRecordTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex,
hwDslamNonUnicastUpportMonitorBroadcastRate,
hwDslamNonUnicastUpportMonitorUnknownUnicastRate,
hwDslamNonUnicastUpportMonitorUnknownMulticastRate
}
STATUS current
DESCRIPTION
"The SNMP trap is generated when the number of non-unicast packets received by the uplink-port exceeds the threshold."
::= { hwEthernetAlarmTrapsOids 77 }
hwIPTunnelHardwareOverloadTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the IP tunnel hardware occupancy in the system exceeds the upper threshold."
::= { hwEthernetAlarmTrapsOids 78 }
hwIPTunnelHardwareOverloadRestoreTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the IP tunnel hardware occupancy in the system is lower than the lower threshold."
::= { hwEthernetAlarmTrapsOids 79 }
hwVPNHardwareOverloadTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the VNI peer hardware occupancy in the system exceeds the upper threshold."
::= { hwEthernetAlarmTrapsOids 80 }
hwVPNHardwareOverloadRestoreTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the VNI peer hardware occupancy in the system is lower than the lower threshold."
::= { hwEthernetAlarmTrapsOids 81 }
hwSRv6TunnelHardwareOverloadTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the segment-routing ipv6 tunnel hardware occupancy in the system exceeds the upper threshold."
::= { hwEthernetAlarmTrapsOids 82 }
hwSRv6TunnelHardwareOverloadRestoreTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwResourceOverloadAwareUpperThreshold,
hwResourceOverloadAwareLowerThreshold,
hwResourceOverloadAwareCurValue
}
STATUS current
DESCRIPTION
"This trap is sent when the segment-routing ipv6 tunnel hardware occupancy in the system is lower than the lower threshold."
::= { hwEthernetAlarmTrapsOids 83 }
-- hwExtSrvFlow
hwExtSrvFlow OBJECT IDENTIFIER ::= { hwEthernetPort 5 }
hwExtSrvFlowIndexNext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates next available value for hwExtSrvFlowIndex of a service flow entry in hwExtSrvFlowTable.
This will report values >=1 if a new service flow may be created or else the value 0 if this is not possible.
A row creation operation in this table for an entry with an hwExtSrvFlowIndex value may fail
if the current value of this object is not used as the index. Even if the value read is used,
there is no guarantee that it will still be the valid index when the creation operation is attempted;
another manager may have already got in during the intervening time interval. In this case,
hwExtSrvFlowIndexNext should be re-read and the creation re-tried with the new value.
This value will automatically change when the current value is used to create a new row.
"
::= { hwExtSrvFlow 1 }
hwExtSrvFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwExtSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains service flow configuration information. It is used to create, modify,
delete and query service flows.
The index of this table is hwExtSrvFlowIndex.
"
::= { hwExtSrvFlow 2 }
hwExtSrvFlowEntry OBJECT-TYPE
SYNTAX HwExtSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains service flow configuration information. It is used to create, modify,
delete and query service flows.
The index of this entry is hwExtSrvFlowIndex.
"
INDEX { hwExtSrvFlowIndex }
::= { hwExtSrvFlowTable 1 }
HwExtSrvFlowEntry ::=
SEQUENCE {
hwExtSrvFlowIndex
Integer32,
hwExtSrvFlowPara1
Integer32,
hwExtSrvFlowPara2
Integer32,
hwExtSrvFlowPara3
Integer32,
hwExtSrvFlowPara4
Integer32,
hwExtSrvFlowPara5
Integer32,
hwExtSrvFlowParaType
INTEGER,
hwExtSrvFlowVlanid
Integer32,
hwExtSrvFlowReceiveTrafficDescrIndex
Integer32,
hwExtSrvFlowTransmitTrafficDescrIndex
Integer32,
hwExtSrvFlowMultiServiceType
INTEGER,
hwExtSrvFlowMultiServiceUserPara
Integer32,
hwExtSrvFlowAdminStatus
INTEGER,
hwExtSrvFlowOperStatus
INTEGER,
hwExtSrvFlowRowStatus
RowStatus,
hwExtSrvFlowInnerVlanId
Integer32,
hwExtSrvFlowDescInfo
OCTET STRING,
hwExtSrvFlowTagTransform
INTEGER,
hwExtSrvFlowSimulationServiceType
INTEGER,
hwExtSrvFlowRemoteDescInfo
OCTET STRING,
hwExtSrvFlowOutboundTrafficTableName
OCTET STRING,
hwExtSrvFlowInboundTrafficTableName
OCTET STRING,
hwExtSrvFlowRxUpc
INTEGER,
hwExtSrvFlowTxUpc
INTEGER,
hwExtSrvFlowNNIInnerVlanId
Integer32,
hwExtSrvFlowNNIInnerPriority
Integer32,
hwExtSrvFlowBundleIndex
Integer32,
hwExtSrvFlowBundleMemberSortPara
Integer32,
hwExtSrvFlowSourceType
INTEGER,
hwExtSrvFlowDestinationType
INTEGER,
hwExtSrvFlowSourceParaType
INTEGER,
hwExtSrvFlowSourcePara1
Integer32,
hwExtSrvFlowSourcePara2
Integer32,
hwExtSrvFlowSourcePara3
Integer32,
hwExtSrvFlowSourcePara4
Integer32,
hwExtSrvFlowSourcePara5
Integer32,
hwExtSrvFlowSourceMultiServiceType
INTEGER,
hwExtSrvFlowSourceMultiServiceUserPara
Integer32,
hwExtSrvFlowSourceInnerVlanId
Integer32,
hwExtSrvFlowOntPortListMask
OCTET STRING,
hwExtSrvFlowOntPortType
INTEGER,
hwExtSrvFlowStatPerSwitch
INTEGER
}
hwExtSrvFlowIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the service flow index, a unique value to identify a service flow.
To create a service flow, this leaf is optional. If a valid free value is specified,
the value will be the index of the service flow to be created. If no value is specified,
an index will be allocated automatically for the service flow.
"
::= { hwExtSrvFlowEntry 1 }
hwExtSrvFlowPara1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, this leaf indicates the PVC connect ID.
If the value of hwExtSrvFlowParaType is set to 2, 4, 6, 9, 10, 11, 12, 13, 14, 15, or 16, this leaf indicates the shelf ID.
If hwExtSrvFlowParaType is set to 3, 5, or 8, this leaf indicates the PTM mode of VDSL2, SHDSL or ADSL2/2+.
If the value of hwExtSrvFlowParaType is set to 7, this leaf indicates the IfIndex of the port.
"
::= { hwExtSrvFlowEntry 2 }
hwExtSrvFlowPara2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, this leaf is reserved.
If the value of hwExtSrvFlowParaType is set to 2, 4, 6, 9, 10, 11, 12, 13, 14, 15, or 16, this leaf indicates the slot ID.
If the value of hwExtSrvFlowParaType is set to 3, 5, or 8, this leaf indicates the shelf ID.
If the value of hwExtSrvFlowParaType is set to 7, this leaf indicates the VPI.
"
::= { hwExtSrvFlowEntry 3 }
hwExtSrvFlowPara3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, this leaf is reserved.
If the value of hwExtSrvFlowParaType is set to 2, 4, 6, 9, 10, 11, 12, 13, 14, 15, or 16, this leaf indicates the port ID.
If the value of hwExtSrvFlowParaType is set to 3, 5, or 8, this leaf indicates the slot ID.
If the value of hwExtSrvFlowParaType is set to 7, this leaf indicates the VCI.
"
::= { hwExtSrvFlowEntry 4 }
hwExtSrvFlowPara4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, 2, 7, or 16, this leaf is reserved.
If the value of hwExtSrvFlowParaType is set to 3, 5, or 8, this leaf indicates the port ID.
If the value of hwExtSrvFlowParaType is set to 4, this leaf indicates the ONT ID
for the GPON profile mode and GEM port ID for the GPON distributed mode.
If the value of hwExtSrvFlowParaType is set to 6, 9, 10, 11, or 12, this leaf indicates the ONT ID.
If VLAN range service flow for all ONTs is created, the value of this leaf is -1.
If the value of hwExtSrvFlowParaType is set to 13, this leaf indicates the CNU ID.
If the value of hwExtSrvFlowParaType is set to 14, this leaf indicates the ONT ID and the type of service-port endpoint, as follows:
--------------------------------------------------------
| bit16-bit31 | bit0-bit15 |
--------------------------------------------------------
| ONT ID | the type of service-port endpoint |
0: ONT lan-eth port
1: ONT iphost port
2: ONT lan-vdsl port
3: ONT ippath port
255: ONT WAN port
--------------------------------------------------------
If the value of hwExtSrvFlowParaType is set to 15, this leaf indicates the CM index.
"
::= { hwExtSrvFlowEntry 5 }
hwExtSrvFlowPara5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, 2, 3, 5, 6, 7, 8, 15, or 16, this leaf is reserved.
If the value of hwExtSrvFlowParaType is set to 4, this leaf indicates the GEM port index for
the GPON profile mode and is reserved for the GPON distributed mode.
The returned value is -1 if this leaf is reserved.
If the value of hwExtSrvFlowParaType is set to 9, 10, 11, 12, this leaf indicates the port mask
of ports on ONT, bit0 indicates port 1, bit1 indicates port 2, and so on, the max port number is 8,
only for ONT service flow.
If the value of hwExtSrvFlowParaType is set to 13, this leaf indicates the port mask of ports on CNU,
bit0 indicates port 1, bit1 indicates port 2, and so on, the max port number is 4.
If the value of hwExtSrvFlowParaType is set to 14, this leaf is valid only when the service-port
is configured on the ONT Ethernet, LAN-VDSL or IPPATH port.
Specially, bit16 indicates the WIFI port on Coaxial Network Unit.
"
::= { hwExtSrvFlowEntry 6 }
hwExtSrvFlowParaType OBJECT-TYPE
SYNTAX INTEGER
{
pvc(1),
eth(2),
vdsl(3),
gpon(4),
shdsl(5),
epon(6),
vcl(7),
adsl(8),
gponOntEth(9),
eponOntEth(10),
gponOntIphost(11),
eponOntIphost(12),
eocCnuEth(13),
xponEndToEnd(14),
docsis(15),
fast(16)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of create flow.
Options:
1. pvc(1) -indicates that PVC is the logical port for service flow,
applicable for xDSL ATM mode access and AIUG ATM service.
It is recommended that vcl(7) instead of pvc(1) be used.
2. eth(2) -indicates that the flow is based on Ethernet port.
3. vdsl(3) -indicates VDSL2 access, only for the PTM mode.
4. gpon(4) -indicates GPON access.
5. shdsl(5) -indicates SHDSL access, only for the PTM mode.
6. epon(6) -indicates EPON access.
7. vcl(7) -indicates that VCL(VC port) is the logical port for service flow,
applicable for xDSL ATM mode access and AIUG ATM service.
It is recommended that vcl(7) instead of pvc(1) be used.
8. adsl(8) -indicates ADSL access.
9. gponOntEth(9) -indicates eth access on the ONT of GPON, only for ONT service flow.
10. eponOntEth(10) -indicates eth access on the ONT of EPON, only for ONT service flow.
11. gponOntIphost(11) -indicates iphost access on the ONT of GPON, only for ONT service flow.
12. eponOntIphost(12) -indicates iphost access on the ONT of EPON, only for ONT service flow.
13. eocCnuEth(13) -indicates eth access on the Coaxial Network Unit of EoC, only for Coaxial Network Unit service flow.
14. xponEndToEnd(14) -indicates eth access, iphost access, or WAN access on the ONT of xPON, only for ONT service flow.
15. docsis(15) -indicates DOCSIS access.
16. fast(16) -indicates G.fast access.
"
DEFVAL { pvc }
::= { hwExtSrvFlowEntry 7 }
hwExtSrvFlowVlanid OBJECT-TYPE
SYNTAX Integer32 (-1|1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service VLAN ID, identifying the global VLAN for switch-oriented service flow.
"
DEFVAL { 1 }
::= { hwExtSrvFlowEntry 8 }
hwExtSrvFlowReceiveTrafficDescrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic table (hwIpTrafficParamTable)
applying to the service flow in the outbound direction of the user
port (for terminal users, it is the Rx direction).
"
DEFVAL { 1 }
::= { hwExtSrvFlowEntry 9 }
hwExtSrvFlowTransmitTrafficDescrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of the IP traffic table (hwIpTrafficParamTable) applying to
the service flow in the inbound direction of the user port (for terminal users,
it is the Tx direction).
"
DEFVAL { 1 }
::= { hwExtSrvFlowEntry 10 }
hwExtSrvFlowMultiServiceType OBJECT-TYPE
SYNTAX INTEGER
{
byUserVlan(1),
byEncap(2),
by8021p(3),
byVlanEncap(4),
byDoubleVlan(5),
by8021pList(6),
singleService(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic classification criteria on the port or logical port for user services.
Options:
1. byUserVlan(1) -indicates traffic classification by C-VLAN.
2. byEncap(2) -indicates traffic classification by EtherType.
3. by8021p(3) -indicates traffic classification by C-VLAN+802.1p.
4. byVlanEncap(4) -indicates traffic classification by C-VLAN+EtherType
5. byDoubleVlan(5) -indicates traffic classification by S-VLAN+C-VLAN.
6. by8021pList(6) -indicates traffic classification by C-VLAN+802.1pList.
7. singleService(255) -indicates traffic classification by port or logical port.
To create a service flow, this leaf is optional. If a value is not specified,
singleService(255) is adopted by default, which indicates traffic classification by port or logical port.
"
::= { hwExtSrvFlowEntry 11 }
hwExtSrvFlowMultiServiceUserPara OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic classification parameter on the port or logical port for user service.
The meaning is variable with the value of hwExtSrvFlowMultiServiceType:
If the value of hwExtSrvFlowMultiServiceType is set to byUserVlan(1),
this leaf indicates the C-VLAN ID. The value range of the C-VLAN ID is 1-4095.
The value 0 indicates priority-tagged, the value 0xFFFF indicates untagged,
and the value 0xFFFE indicates any (other all) traffic. For VLAN range service flow,
this leaf includes the start C-VLAN ID (1-4095) and the end C-VLAN ID (1-4095):
------------------------------------------------------
| bit31-bit28 | bit27-bit16 | bit15-bit12 | bit11-bit0 |
--------------------------------------------------------
| Reserved | End VLAN ID | reserve | VLAN ID |
--------------------------------------------------------
If the value of hwExtSrvFlowMultiServiceType is set to byEncap(2), this leaf indicates
the EtherType. The value IPoE(1) indicates IPv4(0x0800), IPv6(0x86dd),ARP(0x0806), RARP(0x8035)
and other non-PPPoE traffic; the value PPPoE(2) indicates PPPoE traffic(0x8863 & 0x8864).
the value IPv6oE(3) indicates IPv6 traffic(0x86dd);
the value IPv4oE(0) indicates IPoE traffic but without IPv6 traffic;
If the value of hwExtSrvFlowMultiServiceType is set to by8021p(3), this leaf indicates
the combination of the C-VLAN ID (0-4095; 0 indicates priority-tagged)
and the 802.1p priority (0-7):
----------------------------------------------------------
| bit31-bit16 | bit15-bit13 | bit12 | bit11-bit0 |
----------------------------------------------------------
| Reserved | Priority(0-7) | reserve | VLAN ID |
----------------------------------------------------------
If the value of hwExtSrvFlowMultiServiceType is set to byVlanEncap(4), this leaf indicates
the combination of the C-VLAN ID (0-4095; 0 indicates priority-tagged, and 0x1FFF indicates
untagged) and the EtherType (0: IPv4oE; 1: IPoE; 2: PPPoE; 3: IPv6oE):
---------------------------------------------------------------
| bit31-bit16 | bit15-bit13 | bit12 | bit11-bit0 |
---------------------------------------------------------------
| Reserved | EtherType | Untagged flag | VLAN ID |
----------------------------------------------------------------
If the hwExtSrvFlowMultiServiceType is byDoubleVlan(5),
the hwExtSrvFlowMultiServiceUserPara means the C-VLAN
(inner VLAN, 1-4095) and S-VLAN (outer VLAN, 1-4095)
------------------------------------------------------------
| bit31-bit28 | bit27-bit16 | bit15-bit12 | bit11-bit0 |
------------------------------------------------------------
| Reserved | Inner VLAN | reserve |Outer VLAN |
------------------------------------------------------------
If the hwExtSrvFlowMultiServiceType is by8021pList(6),
the hwExtSrvFlowMultiServiceUserPara means the 802.1p list bitmap and
C-VLAN (outer VLAN, 1-4095 or 0xFFFE). The C-VLAN value 0xFFFE indicates any VLAN.
For example, if the PriorityMask is 0x05, the priority list is 0 and 2.
------------------------------------------------
| bit31-bit24 | bit23-bit16 | bit15-bit0 |
----------------------------------------------
| Reserved | PriorityMask | VLAN ID |
-----------------------------------------------
If the hwExtSrvFlowMultiServiceType is singleService (255),
the hwExtSrvFlowMultiServiceType is invalid.
"
::= { hwExtSrvFlowEntry 12 }
hwExtSrvFlowAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the administrative status of the service flow.
Options:
1. up(1) -indicates that traffic is allowed to pass.
2. down(2) -indicates that traffic is blocked.
Default: up(1)
"
DEFVAL { up }
::= { hwExtSrvFlowEntry 13}
hwExtSrvFlowOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the run status of the service flow.
It is read only.
Options:
1. up(1) -indicates the flow operstatus is up
2. down(2) -indicates the flow operstatus is down
3. unknown(3) -indicates the flow operstatus is unknown
"
::= { hwExtSrvFlowEntry 14}
hwExtSrvFlowRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. To create a service flow,
set this leaf to createAndGo(4). To delete a service flow,
set this leaf to destroy(6).
When this leaf is queried, the value is fixed to active(1).
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates creating a service flow
3. destroy(6) -indicates deleting a service flow
"
DEFVAL { active }
::= { hwExtSrvFlowEntry 15}
hwExtSrvFlowInnerVlanId OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multi-Service up inner vlan id,
the bound of parameter is 1 to 4095.
"
DEFVAL { -1 }
::= { hwExtSrvFlowEntry 16 }
hwExtSrvFlowDescInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the description of a service flow, used for describing certain
information about a service flow, such as the telephone number or location
of the user. Note that the value may be not unique.
The default value of the description string is null.
"
::= { hwExtSrvFlowEntry 17 }
hwExtSrvFlowTagTransform OBJECT-TYPE
SYNTAX INTEGER
{
add(0),
transparent(1),
translate(2),
translateAndAdd(3),
addDouble(4),
translateDouble(5),
translateAndRemove(6),
remove(7),
removeDouble(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN tag transforming mode of the service flow,
which means how the VLAN tags are changed in the upstream direction
(from user-side to the network-side) when the traffic passes through the access node.
Normally, in the reverse direction, transforming is reversed. For example,
in the upstream direction, if it is 'adding one VLAN tag',
and in the downstream direction it will be 'removing one VLAN tag'.
Currently, nine transforming modes are supported:
Options:
1. add(0) -indicates adding one VLAN tag to the traffic in the upstream direction
2. transparent(1) -indicates retaining the VLAN tag of the traffic in the upstream direction
The S-VLAN ID allocated must be the same as the C-VLAN (user VLAN) ID
3. translate(2) -indicates translating the C-VLAN to the S-VLAN
4. translateAndAdd(3) -indicates translating the C-VLAN to the S-VLAN
and adding one VLAN tag as a new C-VLAN
5. addDouble(4) -indicates adding two VLAN tags to the traffic
6. translateDouble(5) -indicates translating the S-VLAN and C-VLAN to the new S-VLAN and the new C-VLAN
7. translateAndRemove(6) -indicates translating the S-VLAN and C-VLAN to a new S-VLAN and no C-VLAN
for the input traffic with double VLANs
8. remove(7) -indicates removing one VLAN tag (the outer one if there are two VLAN tags) from the traffic
Only the connection-oriented service flow supports this mode
9. removeDouble(8) -indicates removing two VLAN tags from the traffic
Only the connection-oriented service flow supports this mode.
"
DEFVAL { add }
::= { hwExtSrvFlowEntry 18 }
hwExtSrvFlowSimulationServiceType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
default(0),
aoe(1),
tdmoe(2),
ethernetTransparent(3),
vcloe(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of a simulation service.
Options:
1. invalid(-1) -indicates a connection-oriented service flow, only for read
2. default(0) -indicates a switch-oriented service flow rather than a simulation service
The S-VLAN (hwExtSrvFlowVlanid) is mandatory
3. aoe(1) -indicates an AoE (ATM over Ethernet) service flow for ATM PWE3 service
4. tdmoe(2) -indicates a TDMoE (TDM over Ethernet) service flow for E1/STM-1
upstream transmission and TDM PWE3 service
5. ethernetTransparent(3) -indicates the Ethernet transparent service flow. That is, all
the Ethernet traffic from the user side is transparently transmitted
to the network side
6. vcloe(4) --indicates a virtual channel link over Ethernet (VCLoE) service flow,
which is a virtual service channel automatically created by the system.
Default: default(0)
If this leaf is set to a value other than default(0), the S-VLAN (hwExtSrvFlowVlanid)
of the service is invalid.
"
DEFVAL { default }
::= { hwExtSrvFlowEntry 19 }
hwExtSrvFlowRemoteDescInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the description of remote end of a service flow,
used for describing certain information about a service flow so-called RID.
Note that the value may be not unique.
The default value of the description string is null.
"
::= { hwExtSrvFlowEntry 20 }
hwExtSrvFlowOutboundTrafficTableName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of IP traffic table (hwIpTrafficParamTable)
applying to the service flow in the outbound direction of the user port.
"
::= { hwExtSrvFlowEntry 21 }
hwExtSrvFlowInboundTrafficTableName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of IP traffic table (hwIpTrafficParamTable)
applying to the service flow in the inbound direction of the user port.
"
::= { hwExtSrvFlowEntry 22 }
hwExtSrvFlowRxUpc OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Upc value of Rx in ATM service. This leaf supports only invalid.
Options:
1. invalid(-1) -Indicates not support this feature.
2. on(1) -Indicate Rx Upc on.
3. off(2) -Indicate Rx Upc off.
"
::= { hwExtSrvFlowEntry 23 }
hwExtSrvFlowTxUpc OBJECT-TYPE
SYNTAX INTEGER {
invalid(-1),
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Upc value of Tx in ATM service. This leaf supports only invalid.
Options:
1. invalid(-1) -Indicates not support this feature.
2. on(1) -Indicate Tx Upc on.
3. off(2) -Indicate Tx Upc off.
"
::= { hwExtSrvFlowEntry 24 }
hwExtSrvFlowNNIInnerVlanId OBJECT-TYPE
SYNTAX Integer32 (-1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the network-side inner VLAN ID of switch-oriented service flow.
The value of this leaf is variable with the value of hwExtSrvFlowTagTransform.
If the value of hwExtSrvFlowTagTransform is set to 3, 4, 5, this leaf can be set to 1-4095.
If the vlaue of hwExtSrvFlowTagTransform is set to 0, 1, 2 ,6, 7, 8, this leaf can not be set,
and the invalid value -1 will be returned.
The system uses value 0 of this leaf for some automatically create service flows,
and users cannot use value 0.
"
::= { hwExtSrvFlowEntry 25 }
hwExtSrvFlowNNIInnerPriority OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the network-side inner VLAN priority of switch-oriented service flow.
The value of this leaf is variable with the value of hwExtSrvFlowTagTransform.
If the value of hwExtSrvFlowTagTransform is set to 3, 4, 5, this leaf can be set to 0-7.
If the vlaue of hwExtSrvFlowTagTransform is set to 0, 1, 2 ,6, 7, 8, this leaf can not be set,
and the invalid value -1 will be returned.
It is recommended that the IP traffic table be used to configure the inner
VLAN priority of a service flow instead of using hwExtSrvFlowNNIInnerPriority.
"
::= { hwExtSrvFlowEntry 26 }
hwExtSrvFlowBundleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the service flow bundle index.
A service flow bundle is an entity including certain service flows from
one L3 access user such as residential gateway device. Traffic associated
with different service flows sharing the same bundle follows the same
forwarding path across the access node. And the service flows are
classified for 802.1p CoS purpose.
If a service flow is not belong to any flow bundle when creating, this leaf can not be set, and
the invalid value -1 will be returned.
"
::= { hwExtSrvFlowEntry 27 }
hwExtSrvFlowBundleMemberSortPara OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..65791)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the corresponding key value of a service flow in service flow bundle.
Now service flow bundle type must be byPbit(1), indicating that the key para is CoS.
The range of CoS is 0-7.
If a service flow is not belong to any flow bundle when creating, this leaf can not be set, and
the invalid value -1 will be returned.
If the high 16 bits of the value is 0,it is in cos mode.the low 8 bits of it represents the value of cos.
If the high 16 bits of the value is 1,it is in cos-list mode.the low 8 bits of it represents the bitmap of cos-list.
"
::= { hwExtSrvFlowEntry 28 }
hwExtSrvFlowSourceType OBJECT-TYPE
SYNTAX INTEGER
{
root(1),
leaf(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the source end-point type of a service flow.
Options:
1. root(1) -indicates that the source end-point is a switch domain.
A switch domain for service flow indicates an S-VLAN.
2. leaf(2) -indicates that the source end-point is a port or logical port.
A port or logical port for service flow indicates a flow point (FP).
The source end-point locates the network side.
If the source end-point type is root(1) and the destination is leaf(2), the flow is called switch-oriented.
If the source end-point type is leaf(2) and the destination is leaf(2), the flow is connection-oriented.
"
DEFVAL { root }
::= { hwExtSrvFlowEntry 29 }
hwExtSrvFlowDestinationType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
leaf(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the destination end-point type of a service flow.
Options:
1. invalid(-1) -indicates invalid.
2. leaf(2) -indicates that the source end-point is a port or logical port.
A port or logical port for service flow indicates a flow point (FP).
The destination end-point locates the user side or cascade side, and the type must be leaf(2).
"
DEFVAL { leaf }
::= { hwExtSrvFlowEntry 30 }
hwExtSrvFlowSourceParaType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
eth(2),
rf(17),
vxlan(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value and meaning of the parameter:
Options:
1. invalid(-1) -indicates invalid.
2. eth(2) -indicates that the source end-point of the service flow is based on Ethernet port.
3. rf(17) -indicates that the source end-point of the service flow is based on RF port.
4. vxlan(18) -indicates that the source end-point of the service flow is based on VxLan.
"
::= { hwExtSrvFlowEntry 31 }
hwExtSrvFlowSourcePara1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf indicates the shelf ID.
If the value of hwExtSrvFlowSourceParaType is -1 and the created service flow is of strict S+C, the value of this leaf indicates the shelf ID.
If a service flow is not connection-oriented, the returned value of this leaf is -1, which indicates invalid.
"
::= { hwExtSrvFlowEntry 32 }
hwExtSrvFlowSourcePara2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf indicates the slot ID.
If the value of hwExtSrvFlowSourceParaType is -1 and the created service flow is of strict S+C, the value of this leaf indicates the slot ID.
If a service flow is not connection-oriented, the returned value of this leaf is -1, which indicates invalid.
"
::= { hwExtSrvFlowEntry 33 }
hwExtSrvFlowSourcePara3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf indicates the port ID.
If the value of hwExtSrvFlowSourceParaType is -1 and the created service flow is of strict S+C, the value of this leaf indicates the port ID.
If a service flow is not connection-oriented, the returned value of this leaf is -1, which indicates invalid.
"
::= { hwExtSrvFlowEntry 34 }
hwExtSrvFlowSourcePara4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf is reserved and the returned value is -1.
If a service flow is not connection-oriented, the returned value of this leaf is -1, which indicates invalid.
"
::= { hwExtSrvFlowEntry 35 }
hwExtSrvFlowSourcePara5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf is reserved and the returned value is -1.
If a service flow is not connection-oriented, the returned value of this leaf is -1, which indicates invalid.
"
::= { hwExtSrvFlowEntry 36 }
hwExtSrvFlowSourceMultiServiceType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
byUserVlan(1),
byDoubleVlan(5),
singleService(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic classification criteria on the port or logical port.
For the source end-point.
Options:
1. invalid(-1) -invalid
2. byUserVlan(1) -indicates traffic classification by outer VLAN ID
3. byDoubleVlan(5) -indicates traffic classification by S-VLAN (outer VLAN)+C-VLAN (inner VLAN)
4. singleService(255) -indicates traffic classification by port or logical port.
To create a service flow, this leaf is optional. If a value is not specified,
singleService(255) is adopted by default, which indicates traffic classification by port or logical port.
"
DEFVAL { singleService }
::= { hwExtSrvFlowEntry 37 }
hwExtSrvFlowSourceMultiServiceUserPara OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow classification parameter on the port or logical port for user service.
The meaning is variable with the value of hwExtSrvFlowSourceMultiServiceType:
If the hwExtSrvFlowSourceMultiServiceType is byUserVlan(1),
the hwExtSrvFlowSourceMultiServiceUserPara means the outer VLAN.
The value 1 - 4095 means C-VLAN ID, and the value 0xFFFF means untagged traffic.
The value 0xFFFE means any (other all) traffic.
bit31-bit28 bit27-bit16 bit15-bit12 bit11-bit0
reserve reserve reserve VLAN ID
If the hwExtSrvFlowSourceMultiServiceType is byDoubleVlan(5),
the hwExtSrvFlowSourceMultiServiceUserPara means the C-VLAN(inner VLAN, 1-4095)
and S-VLAN(outer VLAN, 1-4095) combination:
bit31-bit28 bit27-bit16 bit15-bit12 bit11-bit0
reserve Inner VLAN reserve Outer VLAN
"
::= { hwExtSrvFlowEntry 38 }
hwExtSrvFlowSourceInnerVlanId OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multi-Service up inner vlan id, the bound of parameter is 1 to 4095.
If a service flow is not connection-oriented, or the value of this leaf is not set,
the returned value of this leaf is -1, which indicates invalid.
"
::= { hwExtSrvFlowEntry 39 }
hwExtSrvFlowOntPortListMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This leaf is required when the service flow is created on a specified ONT port.
The 8-character string maps eight ports. The value 1 of a character indicates that the corresponding port is valid,
and the value 0 of a character indicates that the corresponding port is invalid.
For example, 11000000 indicates ports 1 and 2, and 01010101 indicates ports 2, 4, 6, and 8.
The port type depends on hwExtSrvFlowOntPortType.
If hwExtSrvFlowOntPortType is set to eth(1), it indicates an ETH port.
If hwExtSrvFlowOntPortType is set to iphost(2), it indicates an VOIP port.
Currently, VOIP has only one port (port 1), that is, 10000000.
"
::= { hwExtSrvFlowEntry 40 }
hwExtSrvFlowOntPortType OBJECT-TYPE
SYNTAX INTEGER
{
eth(1),
iphost(2),
invalid(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the ONT port type.
Options:
1. eth(1) -indicates the eth port
2. iphost(2) -indicates the VOIP port
3. invalid(255) -indicates this parameter is invalid
During the service flow creation on a specified ONT port, if this leaf is not specified, eth(1) is adopted by default.
"
DEFVAL { eth }
::= { hwExtSrvFlowEntry 41 }
hwExtSrvFlowStatPerSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch of service-port statistics performance.
Options:
1. enable(1) -indicates the switch of service-port statistics performance is enable
2. disable(2) -indicates the switch of service-port statistics performance is disable
"
DEFVAL { disable }
::= { hwExtSrvFlowEntry 42 }
-- hwFlowFluxStatisticTable
hwFlowFluxStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFlowFluxStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains statistics per service flow for traffic received and transmitted.
The index of this table is hwFlowID.
"
::= { hwExtSrvFlow 3 }
hwFlowFluxStatisticEntry OBJECT-TYPE
SYNTAX HwFlowFluxStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains statistics per service flow for traffic received and transmitted.
The index of this entry is hwFlowID.
"
INDEX { hwFlowID }
::= { hwFlowFluxStatisticTable 1 }
HwFlowFluxStatisticEntry ::=
SEQUENCE {
hwFlowID
Integer32,
hwFlowFluxUpCells
Unsigned32,
hwFlowFluxUpPackets
Counter64,
hwFlowFluxDownCells
Unsigned32,
hwFlowFluxDownPackets
Counter64,
hwFlowFluxAdminStatus
INTEGER,
hwFlowFluxUpBytes
Counter64,
hwFlowFluxDownBytes
Counter64,
hwFlowFluxUpDiscardPackets
Counter64,
hwFlowFluxDnDiscardPackets
Counter64,
hwFlowFluxUpMCCells
Counter64,
hwFlowFluxUpMCPackets
Counter64,
hwFlowFluxDownMCCells
Counter64,
hwFlowFluxDownMCPackets
Counter64,
hwFlowFluxSourceUpBytes
Counter64,
hwFlowFluxSourceUpPackets
Counter64,
hwFlowFluxSourceUpDiscardPackets
Counter64,
hwFlowFluxSourceDownBytes
Counter64,
hwFlowFluxSourceDownPackets
Counter64,
hwFlowFluxSourceDownDiscardPackets
Counter64,
hwFlowFluxDestinationUpBytes
Counter64,
hwFlowFluxDestinationUpPackets
Counter64,
hwFlowFluxDestinationUpDiscardPackets
Counter64,
hwFlowFluxDestinationDownBytes
Counter64,
hwFlowFluxDestinationDownPackets
Counter64,
hwFlowFluxDestinationDownDiscardPackets
Counter64
}
hwFlowID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This leaf is the same as hwExtSrvFlowIndex, which indicates the service flow index, a unique
value to identify a service flow.
"
::= { hwFlowFluxStatisticEntry 1 }
hwFlowFluxUpCells OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of upstream cells of the service flow. It is valid for ATM access."
::= { hwFlowFluxStatisticEntry 2 }
hwFlowFluxUpPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of upstream packets of the service flow."
::= { hwFlowFluxStatisticEntry 3 }
hwFlowFluxDownCells OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of downstream cells of the service flow. It is valid for ATM access."
::= { hwFlowFluxStatisticEntry 4 }
hwFlowFluxDownPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of downstream packets of the service flow."
::= { hwFlowFluxStatisticEntry 5 }
hwFlowFluxAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
reset(0),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to reset the statistics only. The value must be set to reset(0).
Options:
1. reset(0) -reset the statistics
2. invalid(-1) -invalid
"
::= { hwFlowFluxStatisticEntry 6 }
hwFlowFluxUpBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of upstream bytes of the service flow."
::= { hwFlowFluxStatisticEntry 7 }
hwFlowFluxDownBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of downstream bytes of the service flow."
::= { hwFlowFluxStatisticEntry 8 }
hwFlowFluxUpDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of upstream discarded packets of the service flow."
::= { hwFlowFluxStatisticEntry 9 }
hwFlowFluxDnDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of downstream discarded packets of the service flow."
::= { hwFlowFluxStatisticEntry 10 }
hwFlowFluxUpMCCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flux of upstream multicast cells of the service flow.(cells/s)"
::= { hwFlowFluxStatisticEntry 11 }
hwFlowFluxUpMCPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flux of upstream multicast packets of the service flow.(packets/s)"
::= { hwFlowFluxStatisticEntry 12 }
hwFlowFluxDownMCCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flux of downstream multicast cells of the service flow.(cells/s)"
::= { hwFlowFluxStatisticEntry 13 }
hwFlowFluxDownMCPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flux of downstream multicast packets of the service flow.(packets/s)"
::= { hwFlowFluxStatisticEntry 14 }
hwFlowFluxSourceUpBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of source upstream bytes of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 15 }
hwFlowFluxSourceUpPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of source upstream packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 16 }
hwFlowFluxSourceUpDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of source upstream discarded packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 17 }
hwFlowFluxSourceDownBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of source downstream bytes of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 18 }
hwFlowFluxSourceDownPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of source downstream packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 19 }
hwFlowFluxSourceDownDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of source downstream discarded packets of the service flow.Only
connection-oriented flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 20 }
hwFlowFluxDestinationUpBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of destination upstream bytes of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 21 }
hwFlowFluxDestinationUpPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of destination upstream packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 22 }
hwFlowFluxDestinationUpDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of destination upstream discarded packets of the service flow.Only
connection-oriented flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 23 }
hwFlowFluxDestinationDownBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of destination downstream bytes of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 24 }
hwFlowFluxDestinationDownPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of destination downstream packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 25 }
hwFlowFluxDestinationDownDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the statistics of destination downstream discarded packets of the service flow.Only
connection-oriented flow supports this leaf, others return 0xff"
::= { hwFlowFluxStatisticEntry 26 }
-- hwFlowBindChannelTable
hwFlowBindChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFlowBindChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains information about the binding relationship between the service
flow and the latency channel.
The index of this table is hwFlowID.
"
::= { hwExtSrvFlow 4 }
hwFlowBindChannelEntry OBJECT-TYPE
SYNTAX HwFlowBindChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains information about the binding relationship between the service
flow and the latency channel.
The index of this entry is hwFlowID.
"
INDEX { hwFlowID }
::= { hwFlowBindChannelTable 1 }
HwFlowBindChannelEntry ::=
SEQUENCE {
hwFlowLatencyChannel
Integer32
}
hwFlowLatencyChannel OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VDSL2 latency channel number.
For QoS purpose, the VDSL2 line may support dual-latency channel,
and the number may be 1 or 2.
The default latency channel number bound to the service flow is 1.
"
DEFVAL { 1 }
::= { hwFlowBindChannelEntry 1 }
-- hwFlowIndexQueryTable
hwFlowIndexQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFlowIndexQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains service flow index query information. It is used to query the
service flow index according to the port or logical port and traffic classification information.
The indexes of this table are ifIndex, hwFlowBridgePortType, hwFlowPortExtPara1, hwFlowPortExtPara2,
hwFlowPortExtPara3, hwFlowMulitiServiceType and hwFlowMulitiServicePara.
"
::= { hwExtSrvFlow 5 }
hwFlowIndexQueryEntry OBJECT-TYPE
SYNTAX HwFlowIndexQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains service flow index query information. It is used to query the
service flow index according to the port or logical port and traffic classification information.
The indexes of this entry are ifIndex, hwFlowBridgePortType, hwFlowPortExtPara1, hwFlowPortExtPara2,
hwFlowPortExtPara3, hwFlowMulitiServiceType and hwFlowMulitiServicePara.
"
INDEX { ifIndex,
hwFlowBridgePortType,hwFlowPortExtPara1,hwFlowPortExtPara2, hwFlowPortExtPara3,
hwFlowMulitiServiceType,hwFlowMulitiServicePara
}
::= { hwFlowIndexQueryTable 1 }
HwFlowIndexQueryEntry ::=
SEQUENCE {
hwFlowBridgePortType
INTEGER,
hwFlowPortExtPara1
Integer32,
hwFlowPortExtPara2
Integer32,
hwFlowPortExtPara3
Integer32,
hwFlowMulitiServiceType
INTEGER,
hwFlowMulitiServicePara
Integer32,
hwFlowIndex
Integer32
}
hwFlowBridgePortType OBJECT-TYPE
SYNTAX INTEGER
{
vcPort(1),
ethernetPtm(2),
gemPort(3),
ontId(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the type of the physical or logical bridge port.
Options:
1. vcPort(1) -indicates a VC port to be a bridge port, capable for ATM mode access.
2. ethernetPtm(2) -indicates an Ethernet port or PTM mode xDSL port to be a bridge port.
3. gemPort(3) -indicates a GPON GEM port to be a bridge port.
4. ontId(4) -indicates a GPON or EPON ONT to be a bridge port.
"
::= { hwFlowIndexQueryEntry 1 }
hwFlowPortExtPara1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwFlowBridgePortType:
If the value of hwFlowBridgePortType is set to vcPort(1): this leaf indicates the VPI.
If the value of hwExtSrvFlowParaType is set to ethernetPtm(2): this leaf is invalid.
If the value of hwExtSrvFlowParaType is set to gemPort(3), this leaf indicates the
ONT ID for the GPON profile mode and GEM port ID for the GPON distributed mode.
If the value of hwExtSrvFlowParaType is set to gpon(4) or epon(6), this leaf indicates the ONT ID
of the GPON or EPON.
"
::= { hwFlowIndexQueryEntry 2 }
hwFlowPortExtPara2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwFlowBridgePortType:
If the value of hwFlowBridgePortType is set to vcPort(1), this leaf indicates the VCI.
If the value of hwExtSrvFlowParaType is set to ethernetPtm(2), this leaf is invalid.
If the value of hwExtSrvFlowParaType is set to gemPort(3), this leaf indicates the
GEM port index for the GPON profile mode and invalid for the GPON distributed mode.
If the value of hwExtSrvFlowParaType is set to gpon(4) or epon(6), this leaf is invalid.
"
::= { hwFlowIndexQueryEntry 3 }
hwFlowPortExtPara3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the reserved parameter to describe a bridge port.
"
::= { hwFlowIndexQueryEntry 4 }
hwFlowMulitiServiceType OBJECT-TYPE
SYNTAX INTEGER
{
byUserVlan(1),
byEncap(2),
by8021p(3),
byVlanEncap(4),
byDoubleVlan(5),
by8021pList(6),
singleService(255)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This leaf is the same as hwExtSrvFlowMultiServiceType,
which indicates the traffic classification criteria on the port or logical port.
For details, see the description of hwExtSrvFlowMultiServiceType.
Options:
1. byUserVlan(1) -the service type is byUserVlan
2. byEncap(2) -the service type is byEncap
3. by8021p(3) -the service type is by8021p
4. byVlanEncap(4) -the service type is byVlanEncap
5. byDoubleVlan(5) -the service type is byDoubleVlan
6. by8021pList(6) -the service type is by8021pList
7. singleService(255) -the service type is singleServices
"
::= { hwFlowIndexQueryEntry 5 }
hwFlowMulitiServicePara OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This leaf is the same as hwExtSrvFlowMultiServiceUserPara,
and the meaning is variable with the value of hwFlowMulitiServiceType.
For details, see the description of hwExtSrvFlowMultiServiceUserPara.
"
::= { hwFlowIndexQueryEntry 6 }
hwFlowIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the service flow index, a unique value to identify a service flow.
In this table, giving the information about the port and traffic classification parameters,
the flow index can be obtained through hwFlowIndex.
"
::= { hwFlowIndexQueryEntry 7 }
-- hwSrvFlowBundleTable
hwSrvFlowBundleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSrvFlowBundleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains service flow bundle configuration information. It is used to
create, delete and query service flow bundles.
The index of this table is hwSrvFlowBundleIndex.
"
::= { hwExtSrvFlow 6 }
hwSrvFlowBundleEntry OBJECT-TYPE
SYNTAX HwSrvFlowBundleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains service flow bundle configuration information. It is used to
create, delete and query service flow bundles.
The index of this entry is hwSrvFlowBundleIndex.
"
INDEX { hwSrvFlowBundleIndex }
::= { hwSrvFlowBundleTable 1 }
HwSrvFlowBundleEntry ::=
SEQUENCE {
hwSrvFlowBundleIndex
Integer32,
hwSrvFlowBundleType
INTEGER,
hwSrvFlowBundleRowStatus
RowStatus
}
hwSrvFlowBundleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service flow bundle index,
a unique value to identify a service flow bundle.If -1 is specified,
an index will be allocated automatically for the service flow bundle.
"
::= { hwSrvFlowBundleEntry 1 }
hwSrvFlowBundleType OBJECT-TYPE
SYNTAX INTEGER { byPbit(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of a service flow bundle.
Currently, only one type is supported, that is, byPbit(1),
which indicates that the service flow bundle is for L3 access,
and that the service flows are classified for 802.1p(P-Bits) CoS purpose.
Options:
1. byPbit(1) -indicates that the service flow bundle is for L3 access,
and that the service flows are classified for 802.1p(P-Bits) CoS purpose.
"
::= { hwSrvFlowBundleEntry 2 }
hwSrvFlowBundleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. To create a service flow bundle,
set hwSrvFlowBundleRowStatus to createAndGo(4).
To delete a service flow bundle, set hwSrvFlowBundleRowStatus to destroy(6).
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates creating a flow bundle
3. destroy(6) -indicates deleting a flow bundle
"
::= { hwSrvFlowBundleEntry 3 }
-- hwSrvFlowBundleQueryTable
hwSrvFlowBundleQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSrvFlowBundleQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains service flow bundle query information. It is
used to query service flow bundles.
The indexes of this table are hwSrvFlowBundleQueryIndex and hwSrvFlowIndex.
"
::= { hwExtSrvFlow 7 }
hwSrvFlowBundleQueryEntry OBJECT-TYPE
SYNTAX HwSrvFlowBundleQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table that contains service flow bundle query information. It is
used to query service flow bundles.
The indexes of this entry are hwSrvFlowBundleQueryIndex and hwSrvFlowIndex.
"
INDEX { hwSrvFlowBundleQueryIndex, hwSrvFlowIndex }
::= { hwSrvFlowBundleQueryTable 1 }
HwSrvFlowBundleQueryEntry ::=
SEQUENCE {
hwSrvFlowBundleQueryIndex
Integer32,
hwSrvFlowIndex
Integer32,
hwSrvFlowBundleMemberSortPara
Integer32
}
hwSrvFlowBundleQueryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service flow bundle index, a unique value to identify a service flow bundle."
::= { hwSrvFlowBundleQueryEntry 1 }
hwSrvFlowIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service flow index, a unique value to identify a service flow."
::= { hwSrvFlowBundleQueryEntry 2 }
hwSrvFlowBundleMemberSortPara OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the corresponding key value of a service flow in service flow bundle.
Currently, the service flow bundle type must be byPbit(1), and hwSrvFlowBundleMemberSortPara indicates the CoS value.
If the high 16 bits of the value is 0,it is in cos mode.the low 8 bits of it represents the value of cos.
If the high 16 bits of the value is 1,it is in cos-list mode.the low 8 bits of it represents the bitmap of cos-list.
"
::= { hwSrvFlowBundleQueryEntry 3 }
-- hwFlowIndexQueryForPPPoESmltTable
hwFlowIndexQueryForPPPoESmltTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFlowIndexQueryForPPPoESmltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service flow index query information for PPPoE simulation. It is used to query the
service flow index according to the ifIndex and ONU ID. It supports the xDSL ports and the xPON ports only.
The indexes of this table are ifIndex and hwFlowIndexQueryForPPPoESmltOnuId.
"
::= { hwExtSrvFlow 8 }
hwFlowIndexQueryForPPPoESmltEntry OBJECT-TYPE
SYNTAX HwFlowIndexQueryForPPPoESmltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service flow index query information for PPPoE simulation. It is used to query the
service flow index according to the ifIndex and ONU ID. It supports the xDSL ports and the xPON ports only.
The indexes of this entry are ifIndex and hwFlowIndexQueryForPPPoESmltOnuId.
"
INDEX { ifIndex,
hwFlowIndexQueryForPPPoESmltOnuId }
::= { hwFlowIndexQueryForPPPoESmltTable 1 }
HwFlowIndexQueryForPPPoESmltEntry::=
SEQUENCE {
hwFlowIndexQueryForPPPoESmltOnuId
Integer32,
hwFlowIndexList
OCTET STRING
}
hwFlowIndexQueryForPPPoESmltOnuId OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ONU ID of the ONU in the PPPoE simulation scenario. This leaf is valid when the ifIndex indicates that the port
type is xDSL. This leaf should be set to -1 when the service flow is queried according to ifindex only.
"
::= { hwFlowIndexQueryForPPPoESmltEntry 1 }
hwFlowIndexList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1028))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the list of service flow indexes, each index in the list identifies a service flow uniquely. In this table, if given
the ifIndex and ONU ID, the active PPPoE service flow indexes created on the corresponding port can be obtained through
hwFlowIndexList according to the following rules.
Firstly, the maximal number of service flow index in the list is 256. If the service flow number on the corresponding port is
more than 256, only the first 256 service flow will be returned.
Secondly, if there is active PPPoE service flow on the corresponding port, the active PPPoE service flow will be returned.
Otherwise, the active service flow will be returned.
"
::= { hwFlowIndexQueryForPPPoESmltEntry 2 }
hwSrvPortExtStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSrvPortExtStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for extended packet statistics collection based on service flows.
Indicates the table that contains service flow configuration information. It is used to create, modify,
delete and query service flows.
The index of this table is hwExtSrvFlowIndex.
"
::= { hwExtSrvFlow 9 }
hwSrvPortExtStatEntry OBJECT-TYPE
SYNTAX HwSrvPortExtStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for extended packet statistics collection based on service flows.
Indicates the table that contains service flow configuration information. It is used to create, modify,
delete and query service flows.
The index of this entry is hwExtSrvFlowIndex.
"
INDEX { hwExtSrvFlowIndex }
::= { hwSrvPortExtStatTable 1 }
HwSrvPortExtStatEntry ::=
SEQUENCE {
hwSrvPortExtStatRowStatus
RowStatus,
hwSrvPortExtStatCountClear
INTEGER,
hwSrvPortExtStatTimeoutDuration
Integer32,
hwSrvPortExtStatRunningStatus
INTEGER,
hwSrvPortExtStatUsBytes
Counter64,
hwSrvPortExtStatUsPackets
Counter64,
hwSrvPortExtStatUsDiscardPackets
Counter64,
hwSrvPortExtStatDsBytes
Counter64,
hwSrvPortExtStatDsPackets
Counter64,
hwSrvPortExtStatDsDiscardPackets
Counter64,
hwSrvPortExtStatUsPacketsForPriority0
Counter64,
hwSrvPortExtStatUsPacketsForPriority1
Counter64,
hwSrvPortExtStatUsPacketsForPriority2
Counter64,
hwSrvPortExtStatUsPacketsForPriority3
Counter64,
hwSrvPortExtStatUsPacketsForPriority4
Counter64,
hwSrvPortExtStatUsPacketsForPriority5
Counter64,
hwSrvPortExtStatUsPacketsForPriority6
Counter64,
hwSrvPortExtStatUsPacketsForPriority7
Counter64,
hwSrvPortExtStatUsDiscardPacketsForPriority0
Counter64,
hwSrvPortExtStatUsDiscardPacketsForPriority1
Counter64,
hwSrvPortExtStatUsDiscardPacketsForPriority2
Counter64,
hwSrvPortExtStatUsDiscardPacketsForPriority3
Counter64,
hwSrvPortExtStatUsDiscardPacketsForPriority4
Counter64,
hwSrvPortExtStatUsDiscardPacketsForPriority5
Counter64,
hwSrvPortExtStatUsDiscardPacketsForPriority6
Counter64,
hwSrvPortExtStatUsDiscardPacketsForPriority7
Counter64,
hwSrvPortExtStatDsPacketsForPriority0
Counter64,
hwSrvPortExtStatDsPacketsForPriority1
Counter64,
hwSrvPortExtStatDsPacketsForPriority2
Counter64,
hwSrvPortExtStatDsPacketsForPriority3
Counter64,
hwSrvPortExtStatDsPacketsForPriority4
Counter64,
hwSrvPortExtStatDsPacketsForPriority5
Counter64,
hwSrvPortExtStatDsPacketsForPriority6
Counter64,
hwSrvPortExtStatDsPacketsForPriority7
Counter64,
hwSrvPortExtStatUnknownPriorityDownstreamPackets
Counter64,
hwSrvPortExtStatDsDiscardPacketsForPriority0
Counter64,
hwSrvPortExtStatDsDiscardPacketsForPriority1
Counter64,
hwSrvPortExtStatDsDiscardPacketsForPriority2
Counter64,
hwSrvPortExtStatDsDiscardPacketsForPriority3
Counter64,
hwSrvPortExtStatDsDiscardPacketsForPriority4
Counter64,
hwSrvPortExtStatDsDiscardPacketsForPriority5
Counter64,
hwSrvPortExtStatDsDiscardPacketsForPriority6
Counter64,
hwSrvPortExtStatDsDiscardPacketsForPriority7
Counter64,
hwSrvPortExtStatUnknownPriorityDownstreamDiscardPackets
Counter64,
hwSrvPortExtStatDsDiscardPacketsForUnicast
Counter64,
hwSrvPortExtStatDsDiscardPacketsForUnknownUnicast
Counter64,
hwSrvPortExtStatDsDiscardPacketsForMulticast
Counter64,
hwSrvPortExtStatDsDiscardPacketsForUnknownMulticast
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByVlanCheck
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByExpectedPppoeEncapsulation
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByExpectedIpoeEncapsulation
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByExpectedPppoaEncapsulation
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByExpectedIpoaEncapsulation
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByIPSpoofing
Counter64,
hwSrvPortExtStatUsDiscardedPacketsBySourceMacAddressFilter
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByDestinationMacAddressFilter
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByHashConflict
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByOverMacLimitation
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByVmacCheck
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByCar
Counter64,
hwSrvPortExtStatUsdiscardedPacketsMacSpoofing
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByUnknownUnicastSuppression
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByUnknownBroadcastSuppression
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByUnknownMulticastSuppression
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByVLANCheck
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByExpectedPppoeEncapsulation
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByExpectedIpoeEncapsulation
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByUnexpectedPppoaEncapsulation
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByEncapsulationLengthError
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByVmacCheck
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByCar
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByQueue
Counter64,
hwSrvPortExtStatUsDiscardedPacketsByL3Forward
Counter64,
hwSrvPortExtStatDsDiscardedPacketsByL3Forward
Counter64
}
hwSrvPortExtStatRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Starts or stops extended statistics collection of a specified service flow.
Options:
1. active(1) - when this leaf is queried, the value is fixed to active(1)
2. createAndGo(4) - deliver a extend traffic statistic to a specified flow
3. destroy(6) - delete the extend traffic statistic to the specified flow
"
DEFVAL { active }
::= { hwSrvPortExtStatEntry 1 }
hwSrvPortExtStatCountClear OBJECT-TYPE
SYNTAX INTEGER
{
cleared(1),
nouse(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears extended statistics of a specified service flow.
This node does not need to be specified during the start of extended statistics
collection for a service flow.
Options:
1.cleared(1) - reset the extend traffic statistic to the specified flow
2.nouse(2) - in the query operation, this leaf is fixed to nouse(2)
"
::= { hwSrvPortExtStatEntry 2 }
hwSrvPortExtStatTimeoutDuration OBJECT-TYPE
SYNTAX Integer32(1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For a service flow that supports long-duration (exceeding 1440 minutes) extended statistics collection,
this node is optional during the start of statistics collection.
However, when a service flow does not support long-duration extended statistics collection,
an error will be returned if this node is not specified."
::= { hwSrvPortExtStatEntry 3 }
hwSrvPortExtStatRunningStatus OBJECT-TYPE
SYNTAX INTEGER
{
running(1),
timeout(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of extended statistics collection of a specified service flow.
This node has two enumerated values: running and timeout.
Options:
1.running(1) -indicate the extend traffic statistic to the specified flow is running(1)
2.timeout(2) -indicate the extend traffic statistic to the specified flow is time out
"
::= { hwSrvPortExtStatEntry 4 }
hwSrvPortExtStatUsBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream bytes of a specified service flow."
::= { hwSrvPortExtStatEntry 5 }
hwSrvPortExtStatUsPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets of a specified service flow."
::= { hwSrvPortExtStatEntry 6 }
hwSrvPortExtStatUsDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded upstream packets of a specified service flow."
::= { hwSrvPortExtStatEntry 7 }
hwSrvPortExtStatDsBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream bytes of a specified service flow."
::= { hwSrvPortExtStatEntry 8 }
hwSrvPortExtStatDsPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets of a specified service flow."
::= { hwSrvPortExtStatEntry 9 }
hwSrvPortExtStatDsDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets of a specified service flow."
::= { hwSrvPortExtStatEntry 10 }
hwSrvPortExtStatUsPacketsForPriority0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets with flow priority 0."
::= { hwSrvPortExtStatEntry 11 }
hwSrvPortExtStatUsPacketsForPriority1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets with flow priority 1."
::= { hwSrvPortExtStatEntry 12 }
hwSrvPortExtStatUsPacketsForPriority2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets with flow priority 2."
::= { hwSrvPortExtStatEntry 13 }
hwSrvPortExtStatUsPacketsForPriority3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets with flow priority 3."
::= { hwSrvPortExtStatEntry 14 }
hwSrvPortExtStatUsPacketsForPriority4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets with flow priority 4."
::= { hwSrvPortExtStatEntry 15 }
hwSrvPortExtStatUsPacketsForPriority5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets with flow priority 5."
::= { hwSrvPortExtStatEntry 16 }
hwSrvPortExtStatUsPacketsForPriority6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets with flow priority 6."
::= { hwSrvPortExtStatEntry 17 }
hwSrvPortExtStatUsPacketsForPriority7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets with flow priority 7."
::= { hwSrvPortExtStatEntry 18 }
hwSrvPortExtStatUsDiscardPacketsForPriority0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded upstream packets with flow priority 0."
::= { hwSrvPortExtStatEntry 19 }
hwSrvPortExtStatUsDiscardPacketsForPriority1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded upstream packets with flow priority 1."
::= { hwSrvPortExtStatEntry 20 }
hwSrvPortExtStatUsDiscardPacketsForPriority2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded upstream packets with flow priority 2."
::= { hwSrvPortExtStatEntry 21 }
hwSrvPortExtStatUsDiscardPacketsForPriority3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded upstream packets with flow priority 3."
::= { hwSrvPortExtStatEntry 22 }
hwSrvPortExtStatUsDiscardPacketsForPriority4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded upstream packets with flow priority 4."
::= { hwSrvPortExtStatEntry 23 }
hwSrvPortExtStatUsDiscardPacketsForPriority5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded upstream packets with flow priority 5."
::= { hwSrvPortExtStatEntry 24 }
hwSrvPortExtStatUsDiscardPacketsForPriority6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded upstream packets with flow priority 6."
::= { hwSrvPortExtStatEntry 25 }
hwSrvPortExtStatUsDiscardPacketsForPriority7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded upstream packets with flow priority 7."
::= { hwSrvPortExtStatEntry 26 }
hwSrvPortExtStatDsPacketsForPriority0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets with flow priority 0."
::= { hwSrvPortExtStatEntry 27 }
hwSrvPortExtStatDsPacketsForPriority1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets with flow priority 1."
::= { hwSrvPortExtStatEntry 28 }
hwSrvPortExtStatDsPacketsForPriority2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets with flow priority 2."
::= { hwSrvPortExtStatEntry 29 }
hwSrvPortExtStatDsPacketsForPriority3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets with flow priority 3."
::= { hwSrvPortExtStatEntry 30 }
hwSrvPortExtStatDsPacketsForPriority4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets with flow priority 4."
::= { hwSrvPortExtStatEntry 31 }
hwSrvPortExtStatDsPacketsForPriority5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets with flow priority 5."
::= { hwSrvPortExtStatEntry 32 }
hwSrvPortExtStatDsPacketsForPriority6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets with flow priority 6."
::= { hwSrvPortExtStatEntry 33 }
hwSrvPortExtStatDsPacketsForPriority7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets with flow priority 7."
::= { hwSrvPortExtStatEntry 34 }
hwSrvPortExtStatUnknownPriorityDownstreamPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets with an unknown flow priority."
::= { hwSrvPortExtStatEntry 35 }
hwSrvPortExtStatDsDiscardPacketsForPriority0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets with flow priority 0."
::= { hwSrvPortExtStatEntry 36 }
hwSrvPortExtStatDsDiscardPacketsForPriority1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets with flow priority 1."
::= { hwSrvPortExtStatEntry 37 }
hwSrvPortExtStatDsDiscardPacketsForPriority2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets with flow priority 2."
::= { hwSrvPortExtStatEntry 38 }
hwSrvPortExtStatDsDiscardPacketsForPriority3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets with flow priority 3."
::= { hwSrvPortExtStatEntry 39 }
hwSrvPortExtStatDsDiscardPacketsForPriority4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets with flow priority 4."
::= { hwSrvPortExtStatEntry 40 }
hwSrvPortExtStatDsDiscardPacketsForPriority5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets with flow priority 5."
::= { hwSrvPortExtStatEntry 41 }
hwSrvPortExtStatDsDiscardPacketsForPriority6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets with flow priority 6."
::= { hwSrvPortExtStatEntry 42 }
hwSrvPortExtStatDsDiscardPacketsForPriority7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets with flow priority 7."
::= { hwSrvPortExtStatEntry 43 }
hwSrvPortExtStatUnknownPriorityDownstreamDiscardPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of discarded downstream packets with an unknown flow priority."
::= { hwSrvPortExtStatEntry 44 }
hwSrvPortExtStatDsDiscardPacketsForUnicast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of known unicast packets discarded in the downstream direction."
::= { hwSrvPortExtStatEntry 45 }
hwSrvPortExtStatDsDiscardPacketsForUnknownUnicast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of unknown unicast packets discarded in the downstream direction."
::= { hwSrvPortExtStatEntry 46 }
hwSrvPortExtStatDsDiscardPacketsForMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of known multicast packets discarded in the downstream direction."
::= { hwSrvPortExtStatEntry 47 }
hwSrvPortExtStatDsDiscardPacketsForUnknownMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of unknown multicast packets discarded in the downstream direction."
::= { hwSrvPortExtStatEntry 48 }
hwSrvPortExtStatUsDiscardedPacketsByVlanCheck OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to a VLAN check failure.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their VLANs are different from the VLAN of the service flow."
::= { hwSrvPortExtStatEntry 49 }
hwSrvPortExtStatUsDiscardedPacketsByExpectedPppoeEncapsulation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to unexpected PPPoE encapsulation.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because they do not support the PPPoE protocol."
::= { hwSrvPortExtStatEntry 50 }
hwSrvPortExtStatUsDiscardedPacketsByExpectedIpoeEncapsulation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to unexpected IPoE encapsulation.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because they do not support the IPoE protocol."
::= { hwSrvPortExtStatEntry 51 }
hwSrvPortExtStatUsDiscardedPacketsByExpectedPppoaEncapsulation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to unexpected PPPoA encapsulation.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because they do not support the PPPoA protocol."
::= { hwSrvPortExtStatEntry 52 }
hwSrvPortExtStatUsDiscardedPacketsByExpectedIpoaEncapsulation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to unexpected IPoA encapsulation.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because they do not support the IPoA protocol."
::= { hwSrvPortExtStatEntry 53 }
hwSrvPortExtStatUsDiscardedPacketsByIPSpoofing OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to anti-IP spoofing.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their source IP addresses are different from the IP address bound to the service flow."
::= { hwSrvPortExtStatEntry 54 }
hwSrvPortExtStatUsDiscardedPacketsBySourceMacAddressFilter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to source MAC address filtering.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their source MAC addresses are filtered out."
::= { hwSrvPortExtStatEntry 55 }
hwSrvPortExtStatUsDiscardedPacketsByDestinationMacAddressFilter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to destination MAC address filtering.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their destination MAC addresses are filtered out."
::= { hwSrvPortExtStatEntry 56 }
hwSrvPortExtStatUsDiscardedPacketsByHashConflict OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to a hash conflict."
::= { hwSrvPortExtStatEntry 57 }
hwSrvPortExtStatUsDiscardedPacketsByOverMacLimitation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to threshold-crossing of MAC address quantity.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because the number of learned MAC addresses exceeds the upper limit."
::= { hwSrvPortExtStatEntry 58 }
hwSrvPortExtStatUsDiscardedPacketsByVmacCheck OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to a VMAC check failure.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because of VMAC check inconsistency."
::= { hwSrvPortExtStatEntry 59 }
hwSrvPortExtStatUsDiscardedPacketsByCar OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to CAR."
::= { hwSrvPortExtStatEntry 60 }
hwSrvPortExtStatUsdiscardedPacketsMacSpoofing OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to anti-MAC spoofing.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their source MAC addresses are different from the MAC address
bound to the service flow."
::= { hwSrvPortExtStatEntry 61 }
hwSrvPortExtStatDsDiscardedPacketsByUnknownUnicastSuppression OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to unknown unicast suppression.
Specifically, this node is used to collect the statistics of downstream packets that are discarded
because the system implements traffic suppression on unknown unicast packets."
::= { hwSrvPortExtStatEntry 62 }
hwSrvPortExtStatDsDiscardedPacketsByUnknownBroadcastSuppression OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to unknown broadcast suppression.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because the system implements traffic suppression on unknown broadcast packets."
::= { hwSrvPortExtStatEntry 63 }
hwSrvPortExtStatDsDiscardedPacketsByUnknownMulticastSuppression OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to unknown multicast suppression.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because the system implements traffic suppression on unknown multicast packets."
::= { hwSrvPortExtStatEntry 64 }
hwSrvPortExtStatDsDiscardedPacketsByVLANCheck OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to a VLAN check failure.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because their VLANs are different the VLAN of the service flow."
::= { hwSrvPortExtStatEntry 65 }
hwSrvPortExtStatDsDiscardedPacketsByExpectedPppoeEncapsulation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to unexpected PPPoE encapsulation.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because they do not support the PPPoE protocol."
::= { hwSrvPortExtStatEntry 66 }
hwSrvPortExtStatDsDiscardedPacketsByExpectedIpoeEncapsulation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to unexpected IPoE encapsulation.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because they do not support the IPoE protocol."
::= { hwSrvPortExtStatEntry 67 }
hwSrvPortExtStatDsDiscardedPacketsByUnexpectedPppoaEncapsulation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to unexpected PPPoA encapsulation.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because they do not support the PPPoA protocol."
::= { hwSrvPortExtStatEntry 68 }
hwSrvPortExtStatDsDiscardedPacketsByEncapsulationLengthError OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to length errors during encapsulation conversion.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because their lengths are found incorrect during encapsulation conversion."
::= { hwSrvPortExtStatEntry 69 }
hwSrvPortExtStatDsDiscardedPacketsByVmacCheck OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to a VMAC check failure.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because of VMAC check inconsistency."
::= { hwSrvPortExtStatEntry 70 }
hwSrvPortExtStatDsDiscardedPacketsByCar OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to CAR."
::= { hwSrvPortExtStatEntry 71 }
hwSrvPortExtStatDsDiscardedPacketsByQueue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to queue overflow.
This node is used to collect the statistics of downstream packets that are discarded
because they fail to enter queues."
::= { hwSrvPortExtStatEntry 72 }
hwSrvPortExtStatUsDiscardedPacketsByL3Forward OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets discarded due to L3 Forward.
This node is used to collect the statistics of upstream packets that are discarded
by L3 forward."
::= { hwSrvPortExtStatEntry 73 }
hwSrvPortExtStatDsDiscardedPacketsByL3Forward OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets discarded due to L3 Forward.
This node is used to collect the statistics of downstream packets that are discarded
by L3 forward."
::= { hwSrvPortExtStatEntry 74 }
-- hwStaticMacTable
hwStaticMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwStaticMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes static MAC addresses and used for setting, querying, and deleting static MAC addresses.
The index of this table is hwStaticMacIndex, a free index can be obtained through hwStaticMacNextFreeIndex.
"
::= { hwEthernetPort 11 }
hwStaticMacEntry OBJECT-TYPE
SYNTAX HwStaticMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes static MAC addresses and used for setting, querying, and deleting static MAC addresses.
The index of this entry is hwStaticMacIndex, a free index can be obtained through hwStaticMacNextFreeIndex.
"
INDEX { hwStaticMacIndex }
::= { hwStaticMacTable 1 }
HwStaticMacEntry ::=
SEQUENCE {
hwStaticMacIndex
Unsigned32,
hwStaticMacIfIndex
Unsigned32,
hwStaticMacVlanID
Unsigned32,
hwStaticMacVPI
Integer32,
hwStaticMacVCI
Integer32,
hwStaticMacFlowID
Unsigned32,
hwStaticMacMacAddr
OCTET STRING,
hwStaticMacRowStatus
RowStatus,
hwStaticMacPwIndex
Unsigned32
}
hwStaticMacIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a static MAC address. The index is used by the software for recording an entry.
The MAC address corresponding to the index must be null, and a free index can be obtained for the MAC
address through hwStaticMacNextFreeIndex.
"
::= { hwStaticMacEntry 1 }
hwStaticMacIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the port index for configuring a static MAC address on a specified port.
The index uniquely identifies a port.
The value and algorithm of this index are the same as those of the ifIndex.
If you query the MAC address that is bound to a PW, then the returned value is 0xFFFFFFFF, which indicates an invalid value.
"
::= { hwStaticMacEntry 2 }
hwStaticMacVlanID OBJECT-TYPE
SYNTAX Unsigned32 (1..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN to which a static MAC address belongs.
Range: 1-4093
"
::= { hwStaticMacEntry 3 }
hwStaticMacVPI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VPI value among the ATM/xDSL service port parameters.
The following four leaves determine a single-service service port:
hwStaticMacIfIndex, hwStaticMacVlanID, hwStaticMacVPI, and hwStaticMacVCI.
hwStaticMacVPI is no longer used in actual applications and is mainly
used for the purpose of compatibility with earlier versions. Currently,
to set the static MAC address of a service port, hwStaticMacFlowID is
used for specifying the service port index.
If you query the MAC address that is bound to a specified service port
on the xDSL board, the result means the VPI of the service port.
If the type of service port is xPON, then it indicates the ONT ID.
If the type of service port is GIU or if you query the MAC address bound to a PW, then the returned value is -1, which
indicates an invalid value.
"
::= { hwStaticMacEntry 4 }
hwStaticMacVCI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VCI value among the ATM/xDSL service port parameters.
The following four leaves determine a single-service service port:
hwStaticMacIfIndex, hwStaticMacVlanID, hwStaticMacVPI, and hwStaticMacVCI.
hwStaticMacVCI is no longer used in actual applications and is mainly
used for the purpose of compatibility with earlier versions. Currently,
to set the static MAC address of a service port, hwStaticMacFlowID is
used for specifying the service port index.
If you query the MAC address that is bound to a specified service port
on the xDSL board, the result means the VCI of the service port.
If the type of service port is xPON, then it indicates the GEM index.
If the type of service port is GIU or if you query the MAC address bound to a PW, then the returned value is -1,
which indicates an invalid value.
"
::= { hwStaticMacEntry 5 }
hwStaticMacFlowID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index of a service port.
The service port must be already created through hwExtSrvFlowTable.
During query, -1 indicates invalid."
::= { hwStaticMacEntry 6 }
hwStaticMacMacAddr OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (6..17))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address that needs to be configured as a static MAC address.
The following is an example of the input format of the MAC address:
If the MAC address is 00e0-fc11-0000, enter # 0x00 0xe0 0xfc 0x11 0x00 0x00 or the character string 00-e0-fc-11-00-00.
A device may support only one format.
"
::= { hwStaticMacEntry 7 }
hwStaticMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status, used for creating or deleting a static MAC address.
Only options createAndGo(4) and destroy(6) are supported.
Pay attention to the following points when creating a static MAC address:
1. To set a static MAC address on an Ethernet port, input hwStaticMacIndex,
at the same time set and issue hwStaticMacIfIndex, hwStaticMacVlanID,
and hwStaticMacMacAddr, and set hwStaticMacRowStatus to createAndGo(4).
2. To set a static MAC address on a service port, input hwStaticMacIndex,
at the same time set and issue hwStaticMacFlowID, and set hwStaticMacRowStatus to createAndGo(4).
3. To set a static MAC address on a PW, input hwStaticMacIndex,
at the same time set and issue hwStaticMacVlanID, and hwStaticMacMacAddr,
and hwStaticPwIndex, and set hwStaticMacRowStatus to createAndGo(4).
To delete a static MAC address, input hwStaticMacIndex, and set hwStaticMacRowStatus to destroy(6).
In the query operation, the value of hwStaticMacRowStatus is always active(1).
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates set a static MAC address on an ethernet port or a service port
3. destroy(6) -indicates delete a static MAC address on an ethernet port or a service port
"
::= { hwStaticMacEntry 8 }
hwStaticMacPwIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the PW index value for configuring a static MAC address on a special PW.
The index uniquely identifies a PW.
The default value is 0xFFFFFFFF,which indicates it's an invalid value.
"
::= { hwStaticMacEntry 9}
-- hwStaticMacNextFreeIndex
hwStaticMacNextFreeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used for obtaining a free index during the creation of a static MAC address.
The obtained value is used when hwStaticMacIndex is input.
"
::= { hwEthernetPort 12 }
-- hwPortIsolate
hwPortIsolate OBJECT IDENTIFIER ::= { hwEthernetPort 13 }
hwPortIsolateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortIsolateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Ethernet port isolation table.
The indexes of this table are hwFrameIsolateIndex, hwSlotIsolateIndex and hwPortIsolateIndex.
"
::= { hwPortIsolate 1 }
hwPortIsolateEntry OBJECT-TYPE
SYNTAX HwPortIsolateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Ethernet port isolation table.
The indexes of this entry are hwFrameIsolateIndex, hwSlotIsolateIndex and hwPortIsolateIndex.
"
INDEX { hwFrameIsolateIndex,
hwSlotIsolateIndex,
hwPortIsolateIndex }
::= { hwPortIsolateTable 1 }
HwPortIsolateEntry ::=
SEQUENCE {
hwFrameIsolateIndex
Integer32,
hwSlotIsolateIndex
Integer32,
hwPortIsolateIndex
Integer32,
hwIsolateRowstatus
RowStatus,
hwIsolateStatus
INTEGER,
hwIsolateBroadcast
INTEGER,
hwIsolateUnknownMulticast
INTEGER,
hwIsolateUnknownUnicast
INTEGER
}
hwFrameIsolateIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of this table."
::= { hwPortIsolateEntry 1 }
hwSlotIsolateIndex OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of this table."
::= { hwPortIsolateEntry 2 }
hwPortIsolateIndex OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of this table."
::= { hwPortIsolateEntry 3 }
hwIsolateRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. This leaf supports only the query operation;
in the query operation, the returned value of this leaf is always active(1).
Options:
1. active(1) -indicates the query operation
"
DEFVAL { active }
::= { hwPortIsolateEntry 4}
hwIsolateStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the port isolation status. The default value of an upstream port
is disable(2). The default value of a downstream port is enable(1).
Options:
1. enable(1) -indicates the port isolation status is enable
2. disable(2) -indicates the port isolation status is disable
"
::= { hwPortIsolateEntry 5 }
hwIsolateBroadcast OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the system isolation switch of broadcast frame between
different down link ports in the same smart vlan.Default state is disable.
Options:
1. enabled(1) -Indicates the broadcast frame isolation status is enable.
2. disabled(2) -Indicates the broadcast frame isolation status is disable.
"
DEFVAL { disabled }
::= { hwPortIsolateEntry 6 }
hwIsolateUnknownMulticast OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the system isolation switch of unknown multicast frame between
different down link ports in the same smart vlan.Default state is disable.
Options:
1. enabled(1) -Indicates the unknown multicast frame isolation status is enable.
2. disabled(2) -Indicates the unknown multicast frame isolation status is disable.
"
DEFVAL { disabled }
::= { hwPortIsolateEntry 7 }
hwIsolateUnknownUnicast OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the system isolation switch of unknown unicast frame between
different down link ports in the same smart vlan.Default state is disable.
Options:
1. enabled(1) -Indicates the unknown unicast frame isolation status is enable.
2. disabled(2) -Indicates the unknown unicast frame isolation status is disable.
"
DEFVAL { disabled }
::= { hwPortIsolateEntry 8 }
hwPortIsolateGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortIsolateGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port isolation group.
The indexes of this table are hwPortIsolateGroupIndex and hwPortIsolateGroupIfIndex.
"
::= { hwPortIsolate 2 }
hwPortIsolateGroupEntry OBJECT-TYPE
SYNTAX HwPortIsolateGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port isolation group.
The indexes of this entry are hwPortIsolateGroupIndex and hwPortIsolateGroupIfIndex.
"
INDEX {hwPortIsolateGroupIndex, hwPortIsolateGroupIfIndex}
::= { hwPortIsolateGroupTable 1 }
HwPortIsolateGroupEntry ::=
SEQUENCE {
hwPortIsolateGroupIndex
Integer32,
hwPortIsolateGroupIfIndex
Integer32,
hwPortIsolateGroupRowStatus
RowStatus
}
hwPortIsolateGroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"this Para indicates the isolation group ID"
::= { hwPortIsolateGroupEntry 1 }
hwPortIsolateGroupIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"this Para indicates the Fram/Slot/Port"
::= { hwPortIsolateGroupEntry 2 }
hwPortIsolateGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to add, delete the port of isolate
group in this table. To add a new port into group, this
object should set to 'createAndGo'. To delete a port from
group,this object is is initially set to 'destroy'
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -add a new port into group
3. destroy(6) -delete a port from group
"
::= { hwPortIsolateGroupEntry 3}
-- hwDynamicMac
hwDynamicMac OBJECT IDENTIFIER ::= { hwEthernetPort 14 }
hwDynamicMacConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDynamicMacConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Dynamic MAC address config property.
The index of this table is ifIndex.
"
::= { hwDynamicMac 1 }
hwDynamicMacConfigEntry OBJECT-TYPE
SYNTAX HwDynamicMacConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Dynamic MAC address config property.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwDynamicMacConfigTable 1 }
HwDynamicMacConfigEntry ::=
SEQUENCE {
hwPortMaxDynamicMacCount
Unsigned32
}
hwPortMaxDynamicMacCount OBJECT-TYPE
SYNTAX Unsigned32 (0..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAX number of dynamic mac address can be learned per port."
::= { hwDynamicMacConfigEntry 2 }
hwDynamicMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDynamicMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Dynamic MAC address in system.
The indexes of this table are ifIndex and hwDynamicMacIndex.
"
::= { hwDynamicMac 2 }
hwDynamicMacEntry OBJECT-TYPE
SYNTAX HwDynamicMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Dynamic MAC address in system.
The indexes of this entry are ifIndex and hwDynamicMacIndex.
"
INDEX { ifIndex, hwDynamicMacIndex }
::= { hwDynamicMacTable 1 }
HwDynamicMacEntry ::=
SEQUENCE {
hwDynamicMacIndex
Unsigned32,
hwDynamicMacVlanId
Unsigned32,
hwDynamicMacAddr
MacAddress,
hwTimeTillExpired
Unsigned32,
hwDynamicMacRowStatus
RowStatus
}
hwDynamicMacIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..16384)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dynamic MAC address index. "
::= { hwDynamicMacEntry 1 }
hwDynamicMacVlanId OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN of dynamic MAC address. "
::= { hwDynamicMacEntry 2 }
hwDynamicMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mac address, and its format is XX-XX-XX-XX-XX-XX."
::= { hwDynamicMacEntry 3 }
hwTimeTillExpired OBJECT-TYPE
SYNTAX Unsigned32 (10..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the MAC address till expired."
::= { hwDynamicMacEntry 4 }
hwDynamicMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The variable is used to decide what operation will be done
when set from SNMP. The supported operations is only destroy.
"
::= { hwDynamicMacEntry 5 }
hwDynamicMacLearningMode OBJECT-TYPE
SYNTAX INTEGER
{
unlimited(1),
limited(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC address learning mode.
Options:
1. unlimited(1) -MAC learning number is not limited.
2. limited(2) -MAC learning number is limited.
"
::= { hwDynamicMac 3 }
-- hwEthHistoryStats
hwEthHistoryStats OBJECT IDENTIFIER ::= { hwEthernetPort 16 }
hwEthHistoryStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEthHistoryStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ether History Statistic.
The indexes of this table are ifIndex, hwEthStatsIntervalType and hwEthStatsIntervalNum."
::= { hwEthHistoryStats 1 }
hwEthHistoryStatsEntry OBJECT-TYPE
SYNTAX HwEthHistoryStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ether History Statistic.
The indexes of this entry are ifIndex, hwEthStatsIntervalType and hwEthStatsIntervalNum."
INDEX { ifIndex ,
hwEthStatsIntervalType,
hwEthStatsIntervalNum
}
::= { hwEthHistoryStatsTable 1 }
HwEthHistoryStatsEntry ::=
SEQUENCE
{
hwEthStatsIntervalType INTEGER,
hwEthStatsIntervalNum Integer32,
hwEthStatsRxDropEvents Counter64,
hwEthStatsRxOctets Counter64,
hwEthStatsRxPkts Counter64,
hwEthStatsRxBroadcastPkts Counter64,
hwEthStatsRxMulticastPkts Counter64,
hwEthStatsRxPauseFramePkts Counter64,
hwEthStatsRxCRCAlignErrors Counter64,
hwEthStatsRxUndersizePkts Counter64,
hwEthStatsRxOversizePkts Counter64,
hwEthStatsRxFragments Counter64,
hwEthStatsRxJabbers Counter64,
hwEthStatsRxCollisions Counter64,
hwEthStatsRxPkts64Octets Counter64,
hwEthStatsRxPkts65to127Octets Counter64,
hwEthStatsRxPkts128to255Octets Counter64,
hwEthStatsRxPkts256to511Octets Counter64,
hwEthStatsRxPkts512to1023Octets Counter64,
hwEthStatsRxPkts1024to1518Octets Counter64,
hwEthStatsRxPkts1519to2047Octets Counter64,
hwEthStatsRxPkts2048to4095Octets Counter64,
hwEthStatsRxPkts4096to9216Octets Counter64,
hwEthStatsTxOctets Counter64,
hwEthStatsTxPkts Counter64,
hwEthStatsTxBroadcastPkts Counter64,
hwEthStatsTxMulticastPkts Counter64,
hwEthStatsTxPauseFramePkts Counter64,
hwTimeElapsed Integer32,
hwValidInterval TruthValue,
hwEthStatsStartTime OCTET STRING,
hwEthStatsValidNumber Integer32,
hwEthStatsInvalidNumber Integer32,
hwEthStatsStatusChangeTimes Integer32,
hwEthStatsRxUnicastPkts Counter64,
hwEthStatsTxUnicastPkts Counter64,
hwEthStatsRxAlignErrors Counter64,
hwEthStatsTxCollisionPkts Counter64,
hwEthStatsTxSingleCollisionPkts Counter64,
hwEthStatsTxMultipleCollisionPkts Counter64,
hwEthStatsDiscardedUndersizedPkts Counter64,
hwEthStatsTxUnderSizedPkts Counter64,
hwEthStatsTxFragmentsPkts Counter64,
hwEthStatsTxJabbers Counter64,
hwEthStatsTxOverSizedPkts Counter64,
hwEthStatsTx64OctetsPkts Counter64,
hwEthStatsTx65to127OctetsPkts Counter64,
hwEthStatsTx128to255OctetsPkts Counter64,
hwEthStatsTx256to511OctetsPkts Counter64,
hwEthStatsTx512to1023OctetsPkts Counter64,
hwEthStatsTx1024to1518OctetsPkts Counter64,
hwEthStatsTxErrorPkts Counter64,
hwEthStatsRxErrorPkts Counter64,
hwEthStatsTxDropPkts Counter64,
hwEthStatsTxCRCErrorPkts Counter64,
hwEthStatsEfmErroredFrameEvents Unsigned32,
hwEthStatsEfmErroredFrameSecondSummaryEvents Unsigned32,
hwEthStatsEfmErroredFramePeriodEvents Unsigned32
}
hwEthStatsIntervalType OBJECT-TYPE
SYNTAX INTEGER
{
intervaltime15min(0),
intervaltime24h(1),
everbefore(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of Ether History Statistic.
Options:
1. intervaltime15min(0) -15 minutes
2. intervaltime24h(1) -24 hours
3. everbefore(2) -everbefore
"
::= { hwEthHistoryStatsEntry 1 }
hwEthStatsIntervalNum OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval number of Ether History Statistic. When hwEthStatsIntervalType is intervaltime15min,
0 represents current 15 minutes interval, and when hwEthStatsIntervalType is intervaltime24h,
0 represents current 24 hours interval"
::= { hwEthHistoryStatsEntry 2 }
hwEthStatsRxDropEvents OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received discarded packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 3 }
hwEthStatsRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received octets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 4 }
hwEthStatsRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 5 }
hwEthStatsRxBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received broadcast frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 6 }
hwEthStatsRxMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received multicast frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 7 }
hwEthStatsRxPauseFramePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received pause frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 8 }
hwEthStatsRxCRCAlignErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of CRC error frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 9 }
hwEthStatsRxUndersizePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of undersized frames
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 10 }
hwEthStatsRxOversizePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of oversized frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 11 }
hwEthStatsRxFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragment frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 12 }
hwEthStatsRxJabbers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Jabber frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 13 }
hwEthStatsRxCollisions OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of collision frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 14 }
hwEthStatsRxPkts64Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets(64 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 15 }
hwEthStatsRxPkts65to127Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets(65~127 octets in length)
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 16 }
hwEthStatsRxPkts128to255Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets(128~255 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 17 }
hwEthStatsRxPkts256to511Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets(256~511 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 18 }
hwEthStatsRxPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets(512~1023 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 19 }
hwEthStatsRxPkts1024to1518Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets(1024~1518 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 20 }
hwEthStatsRxPkts1519to2047Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets(1519~2047 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 21 }
hwEthStatsRxPkts2048to4095Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets(2048~4095 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 22 }
hwEthStatsRxPkts4096to9216Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets(4096~9216 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 23 }
hwEthStatsTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted octets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 24 }
hwEthStatsTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 25 }
hwEthStatsTxBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted broadcast frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 26 }
hwEthStatsTxMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted multicast frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 27 }
hwEthStatsTxPauseFramePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted pause frames.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 28 }
hwTimeElapsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time of the current interval."
::= { hwEthHistoryStatsEntry 29 }
hwValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"whether the interval number is valid."
::= { hwEthHistoryStatsEntry 30 }
hwEthStatsStartTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Start time of the interval."
::= { hwEthHistoryStatsEntry 31 }
hwEthStatsValidNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of valid interval.
'-1' means invalid value."
::= { hwEthHistoryStatsEntry 32 }
hwEthStatsInvalidNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of invalid interval.
'-1' means invalid value."
::= { hwEthHistoryStatsEntry 33 }
hwEthStatsStatusChangeTimes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of port status changed.
'-1' means invalid value."
::= { hwEthHistoryStatsEntry 34 }
hwEthStatsRxUnicastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received unicast packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 35 }
hwEthStatsTxUnicastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted unicast packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 36 }
hwEthStatsRxAlignErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received alignment error packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 37 }
hwEthStatsTxCollisionPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted collision packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 38 }
hwEthStatsTxSingleCollisionPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted single collision packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 39 }
hwEthStatsTxMultipleCollisionPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted multiple collision packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 40 }
hwEthStatsDiscardedUndersizedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discarded undersized packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 41 }
hwEthStatsTxUnderSizedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted undersized packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 42 }
hwEthStatsTxFragmentsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted fragment packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 43 }
hwEthStatsTxJabbers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted jabbers packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 44 }
hwEthStatsTxOverSizedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted oversized packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 45 }
hwEthStatsTx64OctetsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted packets(64 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 46 }
hwEthStatsTx65to127OctetsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted packets(65~127 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 47 }
hwEthStatsTx128to255OctetsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted packets(128~255 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 48 }
hwEthStatsTx256to511OctetsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted packets(256~511 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 49 }
hwEthStatsTx512to1023OctetsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted packets(512~1023 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 50 }
hwEthStatsTx1024to1518OctetsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted packets(1024~1518 octets in length).
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 51 }
hwEthStatsTxErrorPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted error packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 52 }
hwEthStatsRxErrorPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received error packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 53 }
hwEthStatsTxDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted discarded packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 54 }
hwEthStatsTxCRCErrorPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted CRC error packets.
'18446744073709551615' means invalid value."
::= { hwEthHistoryStatsEntry 55 }
hwEthStatsEfmErroredFrameEvents OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Efm Errored Frame Events.
'4294967295' means invalid value."
::= { hwEthHistoryStatsEntry 56 }
hwEthStatsEfmErroredFrameSecondSummaryEvents OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Efm Errored Frame Second Summary Events.
'4294967295' means invalid value."
::= { hwEthHistoryStatsEntry 57 }
hwEthStatsEfmErroredFramePeriodEvents OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Efm Errored Frame Period Events.
'4294967295' means invalid value."
::= { hwEthHistoryStatsEntry 58 }
-- hwEthHistoryStatsAlarmProfTable
hwEthHistoryStatsAlarmProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEthHistoryStatsAlarmProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Alarm Profile.
The index of this table is alarm-profile's index, hwEthStatsAlarmProfIndex."
::= { hwEthHistoryStats 2 }
hwEthHistoryStatsAlarmProfEntry OBJECT-TYPE
SYNTAX HwEthHistoryStatsAlarmProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Alarm Profile.
The index of this entry is alarm-profile's index, hwEthStatsAlarmProfIndex."
INDEX { hwEthStatsAlarmProfIndex }
::= { hwEthHistoryStatsAlarmProfTable 1 }
HwEthHistoryStatsAlarmProfEntry ::=
SEQUENCE
{
hwEthStatsAlarmProfIndex Integer32,
hwEthStatsAlarmProfName OCTET STRING,
hwEthStatsAlarmTableRefNum Integer32,
hwEthAlarmProfRowStatus RowStatus,
hwEthStatsTxPktsThresH Unsigned32,
hwEthStatsTxPktsThresL Unsigned32,
hwEthStatsRxPktsThresH Unsigned32,
hwEthStatsRxPktsThresL Unsigned32,
hwEthStatsTxOctetsThresH Unsigned32,
hwEthStatsTxOctetsThresL Unsigned32,
hwEthStatsRxOctetsThresH Unsigned32,
hwEthStatsRxOctetsThresL Unsigned32,
hwEthStatsTxUnicastPktsThresH Unsigned32,
hwEthStatsTxUnicastPktsThresL Unsigned32,
hwEthStatsRxUnicastPktsThresH Unsigned32,
hwEthStatsRxUnicastPktsThresL Unsigned32,
hwEthStatsTxMulticastPktsThresH Unsigned32,
hwEthStatsTxMulticastPktsThresL Unsigned32,
hwEthStatsRxMulticastPktsThresH Unsigned32,
hwEthStatsRxMulticastPktsThresL Unsigned32,
hwEthStatsTxBroadcastPktsThresH Unsigned32,
hwEthStatsTxBroadcastPktsThresL Unsigned32,
hwEthStatsRxBroadcastPktsThresH Unsigned32,
hwEthStatsRxBroadcastPktsThresL Unsigned32,
hwEthStatsTxPausePktsThresH Unsigned32,
hwEthStatsTxPausePktsThresL Unsigned32,
hwEthStatsRxAlignErrorsThresH Unsigned32,
hwEthStatsRxAlignErrorsThresL Unsigned32,
hwEthStatsTxDropPktsThresH Unsigned32,
hwEthStatsTxDropPktsThresL Unsigned32,
hwEthStatsRxDropEventsThresH Unsigned32,
hwEthStatsRxDropEventsThresL Unsigned32,
hwEthStatsTxCRCErrorPktsThresH Unsigned32,
hwEthStatsTxCRCErrorPktsThresL Unsigned32,
hwEthStatsRxCRCAlignErrorsThresH Unsigned32,
hwEthStatsRxCRCAlignErrorsThresL Unsigned32,
hwEthStatsTxCollisionPktsThresH Unsigned32,
hwEthStatsTxCollisionPktsThresL Unsigned32,
hwEthStatsTxOversizedPktsThresH Unsigned32,
hwEthStatsTxOversizedPktsThresL Unsigned32,
hwEthStatsRxOversizePktsThresH Unsigned32,
hwEthStatsRxOversizePktsThresL Unsigned32,
hwEthStatsSingleCollisionPktsThresH Unsigned32,
hwEthStatsSingleCollisionPktsThresL Unsigned32,
hwEthStatsMulCollisionPktsThresH Unsigned32,
hwEthStatsMulCollisionPktsThresL Unsigned32,
hwEthStatsTxUndersizedPktsThresH Unsigned32,
hwEthStatsTxUndersizedPktsThresL Unsigned32,
hwEthStatsRxDiscardedUndersizedPktsThresH Unsigned32,
hwEthStatsRxDiscardedUndersizedPktsThresL Unsigned32,
hwEthStatsTxFragmentsPktsThresH Unsigned32,
hwEthStatsTxFragmentsPktsThresL Unsigned32,
hwEthStatsRxFragmentsPktsThresH Unsigned32,
hwEthStatsRxFragmentsPktsThresL Unsigned32,
hwEthStatsTxJabbersThresH Unsigned32,
hwEthStatsTxJabbersThresL Unsigned32,
hwEthStatsRxJabbersThresH Unsigned32,
hwEthStatsRxJabbersThresL Unsigned32,
hwEthStatsTxErrorPktsThresH Unsigned32,
hwEthStatsTxErrorPktsThresL Unsigned32,
hwEthStatsRxErrorPktsThresH Unsigned32,
hwEthStatsRxErrorPktsThresL Unsigned32,
hwEthStatsStatusChangeTimesThres Unsigned32
}
hwEthStatsAlarmProfIndex OBJECT-TYPE
SYNTAX Integer32(-1 | 1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table.
There are 16 alarm profiles now, numbered 1 to 16.
When the value of hwEthStatsAlarmProfIndex is set to -1 for a profile to be added,
the system will automatically assign an index to the profile.
"
::= { hwEthHistoryStatsAlarmProfEntry 1 }
hwEthStatsAlarmProfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the name of alarm profile."
::= { hwEthHistoryStatsAlarmProfEntry 2 }
hwEthStatsAlarmTableRefNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the reference times of alarm profile."
::= { hwEthHistoryStatsAlarmProfEntry 3 }
hwEthAlarmProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
Before a profile can be deleted, it must be not
referenced by all ports.
"
::= { hwEthHistoryStatsAlarmProfEntry 4 }
hwEthStatsTxPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 5 }
hwEthStatsTxPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 6 }
hwEthStatsRxPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 7 }
hwEthStatsRxPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 8 }
hwEthStatsTxOctetsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Octets in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 9 }
hwEthStatsTxOctetsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Octets in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 10 }
hwEthStatsRxOctetsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Octets in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 11 }
hwEthStatsRxOctetsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Octets in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 12 }
hwEthStatsTxUnicastPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Unicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 13 }
hwEthStatsTxUnicastPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Unicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 14 }
hwEthStatsRxUnicastPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Unicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 15 }
hwEthStatsRxUnicastPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Unicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 16 }
hwEthStatsTxMulticastPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Multicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 17 }
hwEthStatsTxMulticastPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Multicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 18 }
hwEthStatsRxMulticastPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Multicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 19 }
hwEthStatsRxMulticastPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Multicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 20 }
hwEthStatsTxBroadcastPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Broadcast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 21 }
hwEthStatsTxBroadcastPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Broadcast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 22 }
hwEthStatsRxBroadcastPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Broadcast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 23 }
hwEthStatsRxBroadcastPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Broadcast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 24 }
hwEthStatsTxPausePktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Pause frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 25 }
hwEthStatsTxPausePktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Pause frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 26 }
hwEthStatsRxAlignErrorsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Alignment Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 27 }
hwEthStatsRxAlignErrorsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Alignment Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 28 }
hwEthStatsTxDropPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Discarded frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 29 }
hwEthStatsTxDropPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Discarded frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 30 }
hwEthStatsRxDropEventsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Discarded frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 31 }
hwEthStatsRxDropEventsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Discarded frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 32 }
hwEthStatsTxCRCErrorPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted CRC error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 33 }
hwEthStatsTxCRCErrorPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted CRC error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 34 }
hwEthStatsRxCRCAlignErrorsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received CRC error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 35 }
hwEthStatsRxCRCAlignErrorsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received CRC error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 36 }
hwEthStatsTxCollisionPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 37 }
hwEthStatsTxCollisionPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 38 }
hwEthStatsTxOversizedPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Oversize frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 39 }
hwEthStatsTxOversizedPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Oversize frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 40 }
hwEthStatsRxOversizePktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Oversize frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 41 }
hwEthStatsRxOversizePktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Oversize frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 42 }
hwEthStatsSingleCollisionPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Single Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 43 }
hwEthStatsSingleCollisionPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Single Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 44 }
hwEthStatsMulCollisionPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Multiple Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 45 }
hwEthStatsMulCollisionPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Multiple Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 46 }
hwEthStatsTxUndersizedPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Undersized frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 47 }
hwEthStatsTxUndersizedPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Undersized frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 48 }
hwEthStatsRxDiscardedUndersizedPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Undersized frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 49 }
hwEthStatsRxDiscardedUndersizedPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Undersized frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 50 }
hwEthStatsTxFragmentsPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Fragment frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 51 }
hwEthStatsTxFragmentsPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Fragment frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 52 }
hwEthStatsRxFragmentsPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Fragment frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 53 }
hwEthStatsRxFragmentsPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Fragment frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 54 }
hwEthStatsTxJabbersThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Jabbers frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 55 }
hwEthStatsTxJabbersThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Jabbers frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 56 }
hwEthStatsRxJabbersThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Jabbers frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 57 }
hwEthStatsRxJabbersThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Jabbers frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 58 }
hwEthStatsTxErrorPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Transmitted Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 59 }
hwEthStatsTxErrorPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Transmitted Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 60 }
hwEthStatsRxErrorPktsThresH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for high byte of Received Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 61 }
hwEthStatsRxErrorPktsThresL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold for low byte of Received Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 62 }
hwEthStatsStatusChangeTimesThres OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Threshold of Status Change times in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm."
::= { hwEthHistoryStatsAlarmProfEntry 63 }
-- hwDynamicMacQuery
HwDynamicMacQueryPara ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"reserved parameter."
SYNTAX Integer32
HwDynamicMacQueryType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"the value is querying index; if no index, th value is -1."
SYNTAX INTEGER
{
eponOntPortInSpecVlan(1)
}
hwDynamicMacQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDynamicMacQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Query Dynamic MAC address.
The indexes of this table are ifIndex, hwDynamicMacVlanId, hwDynamicMacIndex, hwDynamicMacQueryType,
hwDynamicMacQueryPara0, hwDynamicMacQueryPara1, hwDynamicMacQueryPara2, hwDynamicMacQueryPara3.
"
::= { hwEthernetPort 17 }
hwDynamicMacQueryEntry OBJECT-TYPE
SYNTAX HwDynamicMacQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Query Dynamic MAC address.
The indexes of this entry are ifIndex, hwDynamicMacVlanId, hwDynamicMacIndex, hwDynamicMacQueryType,
hwDynamicMacQueryPara0, hwDynamicMacQueryPara1, hwDynamicMacQueryPara2, hwDynamicMacQueryPara3.
"
INDEX { ifIndex, hwDynamicMacVlanId, hwDynamicMacIndex,
hwDynamicMacQueryType,
hwDynamicMacQueryPara0,
hwDynamicMacQueryPara1,
hwDynamicMacQueryPara2,
hwDynamicMacQueryPara3
}
::= { hwDynamicMacQueryTable 1 }
HwDynamicMacQueryEntry ::=
SEQUENCE {
hwDynamicMacQueryType
HwDynamicMacQueryType,
hwDynamicMacQueryPara0
HwDynamicMacQueryPara,
hwDynamicMacQueryPara1
HwDynamicMacQueryPara,
hwDynamicMacQueryPara2
HwDynamicMacQueryPara,
hwDynamicMacQueryPara3
HwDynamicMacQueryPara,
hwExtDynamicMacAddr
OCTET STRING
}
hwDynamicMacQueryType OBJECT-TYPE
SYNTAX HwDynamicMacQueryType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"query type. "
::= { hwDynamicMacQueryEntry 1 }
hwDynamicMacQueryPara0 OBJECT-TYPE
SYNTAX HwDynamicMacQueryPara
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The First reserved Parameter of HwDynamicMacQueryEntry. "
::= { hwDynamicMacQueryEntry 2 }
hwDynamicMacQueryPara1 OBJECT-TYPE
SYNTAX HwDynamicMacQueryPara
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Second reserved Parameter of HwDynamicMacQueryEntry. "
::= { hwDynamicMacQueryEntry 3 }
hwDynamicMacQueryPara2 OBJECT-TYPE
SYNTAX HwDynamicMacQueryPara
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Third reserved Parameter of HwDynamicMacQueryEntry. "
::= { hwDynamicMacQueryEntry 4 }
hwDynamicMacQueryPara3 OBJECT-TYPE
SYNTAX HwDynamicMacQueryPara
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fourth reserved Parameter of HwDynamicMacQueryEntry. "
::= { hwDynamicMacQueryEntry 5 }
hwExtDynamicMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Five mac addresses, and its format is (XX-XX-XX-XX-XX-XX)* . "
::= { hwDynamicMacQueryEntry 6 }
-- hwUniServiceDataQueryTable
hwUniServiceDataQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwUniServiceDataQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwUniServiceDataQueryTable is used for querying the service flow configuration of xDSL port.
This table supports to query bind IP, static MAC, igmp user and service flow.
The indexes of this table are ifIndex, hwUniServiceDataType, hwUniServiceDataIndex1 and hwUniServiceDataIndex2.
"
::= { hwEthernetPort 18 }
hwUniServiceDataQueryEntry OBJECT-TYPE
SYNTAX HwUniServiceDataQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hwUniServiceDataQueryTable is used for querying the service flow configuration of xDSL port.
This table supports to query bind IP, static MAC, igmp user and service flow.
The indexes of this entry are ifIndex, hwUniServiceDataType, hwUniServiceDataIndex1 and hwUniServiceDataIndex2.
"
INDEX { ifIndex,
hwUniServiceDataType,
hwUniServiceDataIndex1,
hwUniServiceDataIndex2
}
::= { hwUniServiceDataQueryTable 1 }
HwUniServiceDataQueryEntry ::=
SEQUENCE {
hwUniServiceDataType
Integer32,
hwUniServiceDataIndex1
Integer32,
hwUniServiceDataIndex2
Integer32,
hwUniServiceDataEntryStatus
RowStatus
}
hwUniServiceDataType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the query information:
1 means querying static IP which is bound on the service flow.
2 means querying static MAC which is bound on the service flow.
3 means querying igmp user which is bound on the service flow.
4 means querying service flow in the current xDSL port.
"
::= { hwUniServiceDataQueryEntry 1 }
hwUniServiceDataIndex1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwUniServiceDataType:
if hwUniServiceDataType equals 1(querying static IP),
this parameter indicates the service flow ID of the static IP.
if hwUniServiceDataType equals 2(querying static MAC),
this parameter indicates the service flow ID of the static MAC.
if hwUniServiceDataType equals 3(querying igmp user),
this parameter indicates the service flow ID of the igmp user ID.
if hwUniServiceDataType equals 4(querying service flow),
this parameter indicates the service flow ID.
"
::= { hwUniServiceDataQueryEntry 2 }
hwUniServiceDataIndex2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The meaning is variable with the value of hwUniServiceDataType:
if hwUniServiceDataType equals 1(querying static IP), this parameter indicates the index of the static IP.
if hwUniServiceDataType equals 2(querying static MAC), this parameter indicates the index of the static MAC.
if hwUniServiceDataType equals 3(querying igmp user), this parameter indicates the index of the igmp user ID.
if hwUniServiceDataType equals 4(querying service flow), this parameter is invalid.
"
::= { hwUniServiceDataQueryEntry 3 }
hwUniServiceDataEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to query the status of the query operation.
It is read-only and the value active(1) is always returned.
Options:
1. active(1) -indicates the query operation
"
::= { hwUniServiceDataQueryEntry 4 }
hwVlanIsolateState OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VlAN isolate state.
Options:
1. enable(1) -indicates the VLAN isolate state is enable
2. disable(2) -indicates the VLAN isolate state is disable
"
::= { hwEthernetPort 19 }
-- hwCtpEthAttributeCfgTable
hwCtpEthAttributeCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCtpEthAttributeCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the CTP_ETH port attribute configuration. The index of this table is ifIndex.
"
::= { hwEthernetPort 20 }
hwCtpEthAttributeCfgEntry OBJECT-TYPE
SYNTAX HwCtpEthAttributeCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the CTP_ETH port attribute configuration. The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwCtpEthAttributeCfgTable 1 }
HwCtpEthAttributeCfgEntry ::=
SEQUENCE
{
hwTrafficSuppressBroadcast
Integer32,
hwTrafficSuppressMulticast
Integer32,
hwTrafficSuppressUnknowncast
Integer32,
hwCtpEthJumboFrameEnable
INTEGER,
hwTrafficSuppressRateBroadcast
Integer32,
hwTrafficSuppressRateMulticast
Integer32,
hwTrafficSuppressRateUnknowncast
Integer32
}
hwTrafficSuppressBroadcast OBJECT-TYPE
SYNTAX Integer32 (-1..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set broadcast traffic suppression on a port.
Range: -1,0-13
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
-1 indicates invalid value.
The suppression levels and corresponding bandwidth ranges are listed as follows:
---------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
---------------------------------------------------------------
0 Not suppressed Not suppressed Not suppressed
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 0 0 0
---------------------------------------------------------------
Default: 7
"
::= { hwCtpEthAttributeCfgEntry 1 }
hwTrafficSuppressMulticast OBJECT-TYPE
SYNTAX Integer32 (-1..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set unknown multicast traffic suppression on a port.
Range: -1,0-13
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression. -1 indicates invalid value.
The suppression levels and corresponding bandwidth ranges are listed as follows:
---------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
---------------------------------------------------------------
0 Not suppressed Not suppressed Not suppressed
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 0 0 0
---------------------------------------------------------------
Default: 7
"
::= { hwCtpEthAttributeCfgEntry 2 }
hwTrafficSuppressUnknowncast OBJECT-TYPE
SYNTAX Integer32 (-1..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set unknown unicast traffic suppression on a port.
Range: -1,0-13
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression. -1 indicates invalid value.
The suppression levels and corresponding bandwidth ranges are listed as follows:
---------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
---------------------------------------------------------------
0 Not suppressed Not suppressed Not suppressed
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 0 0 0
---------------------------------------------------------------
Default: 7
"
::= { hwCtpEthAttributeCfgEntry 3 }
hwCtpEthJumboFrameEnable OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable and disable jumbo frames.
This object does not support binding and issuance of the entire table.
When the carriers' servers need to exchange a large amount of data with their devices,
operate this object to enable jumbo frames.
After the operation is executed successfully,
the corresponding port on the control board can transparently transmit the frames whose size is between 1600 bytes and 9216 bytes.
By default, the ports disable jumbo frames.
Options:
1. invalid(-1) -invalid
2. enabled(1) -enable the jumbo frames
3. disabled(2) -disable the jumbo frames
Default: disable(2)
"
::= { hwCtpEthAttributeCfgEntry 4 }
hwTrafficSuppressRateBroadcast OBJECT-TYPE
SYNTAX Integer32 (-1..24414)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set broadcast traffic suppression on a port.
Range: -1,0-24414
Unit: pps.
-1 indicates indicates no configuration.
"
::= { hwCtpEthAttributeCfgEntry 5 }
hwTrafficSuppressRateMulticast OBJECT-TYPE
SYNTAX Integer32 (-1..24414)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set unknown multicast traffic suppression on a port.
Range: -1,0-24414
Unit: pps.
-1 indicates indicates no configuration.
"
::= { hwCtpEthAttributeCfgEntry 6 }
hwTrafficSuppressRateUnknowncast OBJECT-TYPE
SYNTAX Integer32 (-1..24414)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set unknown unicast traffic suppression on a port.
Range: -1,0-24414
Unit: pps.
-1 indicates indicates no configuration.
"
::= { hwCtpEthAttributeCfgEntry 7 }
hwGlobalStatisticOper OBJECT-TYPE
SYNTAX INTEGER
{
startup(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query global statistics.
Options:
1. startup(1) -enable global statistics
"
::= { hwEthernetPort 21 }
hwEthernetTrapsVbOids OBJECT IDENTIFIER ::= { hwEthernetPort 22 }
hwIpdslamQryConditionFlowBundleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Service flow bundle Index"
::= { hwEthernetTrapsVbOids 1 }
hwActivedXdslPortNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"port of active XDSL"
::= { hwEthernetTrapsVbOids 2 }
hwActivedOntNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Number of active ONTs"
::= { hwEthernetTrapsVbOids 3 }
hwActivedEthPortNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"online Ethernet port"
::= { hwEthernetTrapsVbOids 4 }
hwUplinkPortUpKbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"flow quantity of up-port upload"
::= { hwEthernetTrapsVbOids 5 }
hwUplinkPortDownKbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"flow quantity of up-port download"
::= { hwEthernetTrapsVbOids 6 }
hwUplinkPortUpBandwidthOccupancyRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Rate of up-port up bandwidth"
::= { hwEthernetTrapsVbOids 7 }
hwUplinkPortDownBandwidthOccupancyRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Rate of up-port down bandwidth"
::= { hwEthernetTrapsVbOids 8 }
hwXponUniPortUpKbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Flow quantity of XPON user-port upload"
::= { hwEthernetTrapsVbOids 9 }
hwXponUniPortDownKbps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Flow quantity of XPON user-port download"
::= { hwEthernetTrapsVbOids 10 }
hwUpLinkPortMCastUpPercent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Rate of up-port multicast bandwidth."
::= { hwEthernetTrapsVbOids 11}
hwUpLinkPortBCastUpPercent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Rate of up-port broadcast bandwidth."
::= { hwEthernetTrapsVbOids 12 }
hwUpLinkPortUCastUpPercent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Rate of up-port up unicast"
::= { hwEthernetTrapsVbOids 13 }
hwUpLinkPortMCastDownPercent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Rate of up-port down multicast bandwidth"
::= { hwEthernetTrapsVbOids 14 }
hwUpLinkPortBCastDownPercent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Rate of Up port down broadcast bandwidth "
::= { hwEthernetTrapsVbOids 15 }
hwUpLinkPortUCastDownPercent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Rate of Up port down unicast bandwidth "
::= { hwEthernetTrapsVbOids 16 }
hwConflictMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The source MAC address.
"
::= { hwEthernetTrapsVbOids 17 }
hwIpTrafficParamChangeCause OBJECT-TYPE
SYNTAX INTEGER
{
addIpTrafficProfile(1),
modifyIpTrafficProfile(2),
delIpTrafficProfile(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The change cause of IP traffic profile change trap.
Options:
1. addIpTrafficProfile(1) -add an IP traffic profile
2. modifyIpTrafficProfile(2) -modify the IP traffic profile
3. delIpTrafficProfile(3) -delete the IP traffic profile
"
::= { hwEthernetTrapsVbOids 18 }
hwIpTrafficParamPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicate the outer priority. Equal to the lower 16 bits of the value of hwIpTrafficPriority.
Range: 0-7
"
::= { hwEthernetTrapsVbOids 19 }
hwIpTrafficParamPriorityMappingPolicy OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicate the outer priority mapping policy. Equal to the higher 16 bits of the value of hwIpTrafficPriority.
Outer priority mapping policy:
0xFF (specified priority), 0xFE (priority mapped from the outer CoS field on the ingress),
0xFD (priority copied from the ToS field), 0xFC (priority mapped from the inner CoS field on the ingress),
0xFB (priority mapped from the packet DSCP field on the ingress).
"
::= { hwEthernetTrapsVbOids 20 }
hwIpdslamQryConditionPwIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Pw Index"
::= { hwEthernetTrapsVbOids 21 }
hwEthPMThresholdItem OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicate the performance statistics threshold item."
::= { hwEthernetTrapsVbOids 22 }
hwEthPMCurrentValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicate the current performance statistics value of the threshold item."
::= { hwEthernetTrapsVbOids 23 }
hwEthPMThresholdValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicate the threshold value."
::= { hwEthernetTrapsVbOids 24 }
hwIpdslamQryConditionOntId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicate the ONT ID."
::= { hwEthernetTrapsVbOids 25 }
--hwPacketAttackTrap begin
hwPacketAttackMACAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..17))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAC address.
"
::= { hwEthernetTrapsVbOids 26 }
hwPacketNumberOfMACAddress OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"packet number."
::= { hwEthernetTrapsVbOids 27 }
hwPacketAttackPacketType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"packet type."
::= { hwEthernetTrapsVbOids 28 }
hwPacketNumberOfPacketType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"packet number."
::= { hwEthernetTrapsVbOids 29 }
--hwPacketAttackTrap end
-- hwExtDefaultPolicy
hwExtDefaultPolicy OBJECT IDENTIFIER ::= { hwEthernetPort 23 }
hwExtDefaultFlowUnknownMCast OBJECT-TYPE
SYNTAX INTEGER
{
transparent(1),
discard(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for setting or querying the default unknown multicast policy of the service flows.
Options:
1. transparent(1) -Indicates the default unknown multicast packet forwarding policy of service flows is transparent.
2. discard(2) -Indicates the default unknown multicast packet forwarding policy of service flows is discard.
Default: discard(2)
To set the default unknown multicast packet forwarding policy of service flows, the following
requirements and restrictions must be met:
This leaf is used for setting the default control policy of the service flows.
The set values serve as the default control policy of the newly-created service flows.
Such settings are valid only for the newly-created service flows, and the control policy of the
existing service flows in the system is not changed.
For example, if hwExtDefaultFlowUnknownMCast is set to transparent transmission, the control policy
of the unknown multicast packets for the newly-created service flow is automatically set the transparent
transmission, and the existing service flows in the system are not affected.
"
::= { hwExtDefaultPolicy 1 }
hwExtDefaultFlowDhcpOption82PermitForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for setting and querying the default DHCP option82 transparent transmission switch of the service flow.
Options:
1. enable(1) -Indicates the default DHCP option82 transparent transmission switch is enabled.
2. disable(2) -Indicates the default DHCP option82 transparent transmission switch is disabled.
Default: disable(2)
The following requirements and restrictions are posed on setting the default option82 transparent transmission
switch of the DHCP option82 service flow:
This leaf is used for setting the default control policy of the service flow.
The set value serves as the default control policy of the newly-created service flow.
The setting is valid only for the newly-created service flow, and the control policy of the existing service flows
in the system is not modified.
"
::= { hwExtDefaultPolicy 2 }
hwExtDefaultPortEfmOamAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for setting or querying the default EFM OAM admin status of the port.
Options:
1. enable(1) -Indicates the default EFM OAM admin status is enabled.
2. disable(2) -Indicates the default EFM OAM admin status is disabled.
Default: disable(2)
This leaf is used for setting the default EFM OAM admin status of the port.
The set value serves as the default EFM OAM admin status of the newly-created port.
The setting is valid only for the newly-created port, and the EFM OAM admin status of the existing port
in the system is not modified.
"
::= { hwExtDefaultPolicy 3 }
-- hwXdslEtherStatsTable
hwXdslEtherStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwXdslEtherStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics of xdsl port query table.
The index of this table is ifIndex."
::= { hwEthernetPort 24 }
hwXdslEtherStatsEntry OBJECT-TYPE
SYNTAX HwXdslEtherStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics of xdsl port query table.
The index of this entry is ifIndex."
INDEX { ifIndex }
::= { hwXdslEtherStatsTable 1 }
HwXdslEtherStatsEntry ::=
SEQUENCE {
hwXdslEtherStatsInAllPkts
Counter64,
hwXdslEtherStatsInUcastPkts
Counter64,
hwXdslEtherStatsInMcastPkts
Counter64,
hwXdslEtherStatsInBcastPkts
Counter64,
hwXdslEtherStatsInAllOctets
Counter64,
hwXdslEtherStatsInUcastOctets
Counter64,
hwXdslEtherStatsInMcastOctets
Counter64,
hwXdslEtherStatsInBcastOctets
Counter64,
hwXdslEtherStatsOutAllPkts
Counter64,
hwXdslEtherStatsOutUcastPkts
Counter64,
hwXdslEtherStatsOutMcastPkts
Counter64,
hwXdslEtherStatsOutBcastPkts
Counter64,
hwXdslEtherStatsOutAllOctets
Counter64,
hwXdslEtherStatsOutUcastOctets
Counter64,
hwXdslEtherStatsOutMcastOctets
Counter64,
hwXdslEtherStatsOutBcastOctets
Counter64
}
hwXdslEtherStatsInAllPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of received packets. "
::= { hwXdslEtherStatsEntry 1 }
hwXdslEtherStatsInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of received unicast packets. "
::= { hwXdslEtherStatsEntry 2 }
hwXdslEtherStatsInMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of received multicast packets. "
::= { hwXdslEtherStatsEntry 3 }
hwXdslEtherStatsInBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of received broadcast packets. "
::= { hwXdslEtherStatsEntry 4 }
hwXdslEtherStatsInAllOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of received octet. "
::= { hwXdslEtherStatsEntry 5 }
hwXdslEtherStatsInUcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of received unicast octet. "
::= { hwXdslEtherStatsEntry 6 }
hwXdslEtherStatsInMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of received multicast octet. "
::= { hwXdslEtherStatsEntry 7 }
hwXdslEtherStatsInBcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of received broadcast octet. "
::= { hwXdslEtherStatsEntry 8 }
hwXdslEtherStatsOutAllPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of transmitted packets. "
::= { hwXdslEtherStatsEntry 9 }
hwXdslEtherStatsOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of transmitted unicast packets. "
::= { hwXdslEtherStatsEntry 10 }
hwXdslEtherStatsOutMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of transmitted multicast packets. "
::= { hwXdslEtherStatsEntry 11 }
hwXdslEtherStatsOutBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of transmitted broadcast packets. "
::= { hwXdslEtherStatsEntry 12 }
hwXdslEtherStatsOutAllOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of transmitted octet. "
::= { hwXdslEtherStatsEntry 13 }
hwXdslEtherStatsOutUcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of transmitted unicast octet. "
::= { hwXdslEtherStatsEntry 14 }
hwXdslEtherStatsOutMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of transmitted multicast octet. "
::= { hwXdslEtherStatsEntry 15 }
hwXdslEtherStatsOutBcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of transmitted broadcast octet. "
::= { hwXdslEtherStatsEntry 16 }
-- hwExtProtocolForwardingPolicyTable
hwExtProtocolForwardingPolicyTable OBJECT IDENTIFIER ::= { hwEthernetPort 25 }
hwExtEapolPermitForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the permission switch of forwarding the EAPoL protocol packet.
Options:
1. enable(1) -indicates that the EAPoL protocol packet can be forwarded.
2. disable(2) -indicates that the EAPoL protocol packet is discarded.
Default: enable(1)
"
::= { hwExtProtocolForwardingPolicyTable 1 }
hwExtEthoamEfmPermitForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the permission switch of forwarding the ETHOAM EFM protocol packet.
Options:
1. enable(1) -indicates that the ETHOAM EFM protocol packet can be forwarded.
2. disable(2) -indicates that the ETHOAM EFM protocol packet is discarded.
Default: enable(1)
"
::= { hwExtProtocolForwardingPolicyTable 2 }
hwExtLacpPermitForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the permission switch of forwarding the LACP protocol packet.
Options:
1. enable(1) -indicates that the LACP protocol packet can be forwarded.
2. disable(2) -indicates that the LACP protocol packet is discarded.
Default: enable(1)
"
::= { hwExtProtocolForwardingPolicyTable 3 }
hwExtMstpPermitForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the permission switch of forwarding the MSTP protocol packet.
Options:
1. enable(1) -indicates that the MSTP protocol packet can be forwarded.
2. disable(2) -indicates that the MSTP protocol packet is discarded.
Default: enable(1)
"
::= { hwExtProtocolForwardingPolicyTable 4 }
--ServiceTypeDetect
hwServiceTypeDetect OBJECT IDENTIFIER ::= { hwEthernetPort 26 }
--Service Detect Switch
hwServiceTypeDetectSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates service type detect switch.
Options:
1. enable(1) -indicates the service type detect switch is enabled.
2. disable(2) -indicates the service type detect switch is disabled.
"
::= { hwServiceTypeDetect 1 }
--Service Detect Table
hwServiceTypeDetectTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwServiceTypeDetectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates port service detect table.
The index of this table is ifIndex.
"
::= { hwServiceTypeDetect 2 }
hwServiceTypeDetectEntry OBJECT-TYPE
SYNTAX HwServiceTypeDetectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates port service detect table.
The index of this entry is ifIndex."
INDEX { ifIndex }
::= { hwServiceTypeDetectTable 1 }
HwServiceTypeDetectEntry ::=
SEQUENCE {
hwDetectSwitch
INTEGER,
hwDetectUserMac
MacAddress,
hwDetectUserVlan
Integer32
}
hwDetectSwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
detectHSI(2),
detectMultiService(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the detect service type.
Options:
1. disable(1) -indicates the detect Switch is disabled.
2. detectHSI(2) -indicates the HSI detect is enabled.
3. detectMultiService(3) -indicates the multi-service detect is enabled.
Default: detectMultiService(3)
"
::= { hwServiceTypeDetectEntry 1 }
hwDetectUserMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAC address, and its format is XX-XX-XX-XX-XX-XX."
::= { hwServiceTypeDetectEntry 2 }
hwDetectUserVlan OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..4095)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The user VLAN ID, 0 means untagged, -1 is reserved."
::= { hwServiceTypeDetectEntry 3 }
hwEthernetLine OBJECT IDENTIFIER ::= { hwEthernetPort 27 }
hwEthernetLineGlobalConfig OBJECT IDENTIFIER ::= { hwEthernetLine 1 }
hwEthernetLineAlarmRecoverOnShutdown OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the clear-on-shutdown switch state.
Options:
1. enable(1) -indicates the detect Switch is enabled.
2. disable(2) -indicates the the detect Switch is disabled.
Default: disable(2).
"
::= { hwEthernetLineGlobalConfig 1 }
hwEthernetLineAlarmSuppressInitial OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the suppress-initial-alarm switch state.
Options:
1. enable(1) -indicates the detect Switch is enabled.
2. disable(2) -indicates the the detect Switch is disabled.
Default: enable(1).
"
::= { hwEthernetLineGlobalConfig 2 }
hwEthernetLineOfflineAutoShutdown OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Eth port offline auto shutdown switch state.
Options:
1. enable(1) -indicates the Offline ETH port auto shutdown switch is enabled,
when the switch is enabled, the eth port manage state would be shutdown after the port offline.
2. disable(2) -indicates the Offline ETH port auto shutdown switch is disabled,
when the switch is disabled, the eth port manage state would note be shutdown after the port offline.
Default: disable(1).
"
::= { hwEthernetLineGlobalConfig 3 }
hwOpticsModuleShowMode OBJECT-TYPE
SYNTAX INTEGER
{
standard(1),
dt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the show mode of the information about the optical module of an Ethernet port.
Options:
1. standard(1) -indicates the show mode of the information about the optical module of an Ethernet port is standard,
when the mode is standard, the information about the optical module of an Ethernet port is hex string.
2. dt(2) -indicates the show mode of the information about the optical module of an Ethernet port is dt,
when the mode is dt, the information about the optical module of an Ethernet port is ascii string.
Default: standard(1).
"
::= { hwEthernetLineGlobalConfig 4 }
--hwDownMcTrafficPolicy
hwDownMcTrafficPolicy OBJECT-TYPE
SYNTAX INTEGER
{
noconfig(1),
vlanConnect(2),
vlanMac(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic policy of downstream multicast packets.
Options:
1. noconfig(1) -indicates no configuration ,the traffic policy of downstream multicast packets is decided by board's default configuration.
2. vlanConnect(2) -indicates the traffic policy of downstream multicast packets is S+C priority.
3. vlanMac(3) -indicates the traffic policy of downstream multicast packets is multicast priority.
The default value of traffic policy of downstream multicast packets is noconfig(1).
"
::= { hwEthernetPort 28 }
hwPortPermitForwardTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortPermitForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this table are hwExtPermitForwardIfIdex and hwExtPermitForwardSecondIndex.
This table is used to set or query the forwarding status of the port protocol packet.
It supports the query and set operations"
::= { hwEthernetPort 29 }
hwPortPermitForwardEntry OBJECT-TYPE
SYNTAX HwPortPermitForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The indexes of this entry are hwExtPermitForwardIfIdex and hwExtPermitForwardSecondIndex.
This table is used to set or query the forwarding status of the port protocol packet.
It supports the query and set operations"
INDEX {
hwExtPermitForwardIfIdex,
hwExtPermitForwardSecondIndex
}
::= { hwPortPermitForwardTable 1 }
HwPortPermitForwardEntry ::=
SEQUENCE {
hwExtPermitForwardIfIdex
Integer32,
hwExtPermitForwardSecondIndex
Integer32,
hwExtCfmPermitForwarding
INTEGER
}
hwExtPermitForwardIfIdex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port index of forwarding the CFM protocol packet."
::= { hwPortPermitForwardEntry 1 }
hwExtPermitForwardSecondIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the second index. The meaning varies with the port type.
It must be 0xFFFFFFFF for the DSL or ETH port, and is the ONT ID or 0xFFFFFFFF for the xPON port.
"
::= { hwPortPermitForwardEntry 2 }
hwExtCfmPermitForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the permission switch of forwarding the CFM protocol packet.
Options:
1. enable(1) -indicates that the CFM protocol packet can be forwarded.
2. disable(2) -indicates that the CFM protocol packet is discarded.
Default: enable(1)
"
::= { hwPortPermitForwardEntry 3 }
hwResourceOverloadAwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwResourceOverloadAwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this table is hwResourceType.
This table is used to query the configuration of resource overload.
It supports the query and set operations."
::= { hwEthernetPort 30 }
hwResourceOverloadAwareEntry OBJECT-TYPE
SYNTAX HwResourceOverloadAwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this entry is hwResourceType.
This table is used to query the configuration of resource overload.
It supports the query and set operations."
INDEX {
hwResourceType
}
::= { hwResourceOverloadAwareTable 1 }
HwResourceOverloadAwareEntry ::=
SEQUENCE {
hwResourceType
INTEGER,
hwResourceOverloadAwareSwitch
INTEGER,
hwResourceOverloadAwareUpperThreshold
Integer32,
hwResourceOverloadAwareLowerThreshold
Integer32
}
--hwBoardMacAddressLearningVlanConnectTable
hwBoardMacAddressLearningVlanConnectTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBoardMacAddressLearningVlanConnectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to enable or disable the MAC address learning function on S+C traffic streams.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwL2IfMibObject 11 }
hwBoardMacAddressLearningVlanConnectEntry OBJECT-TYPE
SYNTAX HwBoardMacAddressLearningVlanConnectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to enable or disable the MAC address learning function on S+C traffic streams.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex,hwSlotIndex }
::= { hwBoardMacAddressLearningVlanConnectTable 1 }
HwBoardMacAddressLearningVlanConnectEntry ::=
SEQUENCE {
hwBoardMacAddressLearningVlanConnectCtrl
INTEGER
}
hwBoardMacAddressLearningVlanConnectCtrl OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
disable(1),
enable(2),
noconfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of the the MAC address learning function on S+C traffic streams.
Options:
1. invalid(-1) -Indicates that the MAC address learning function on S+C traffic streams is unavailable.
2. disable(1) -Disables the MAC address learning function on S+C traffic streams.
3. enable(2) -Enables the MAC address learning function on S+C traffic streams.
4. noconfig(3) -Cancels the MAC address learning function on S+C traffic streams. After the command is successfully executed,
the MAC address learning function configured for the specified VLAN takes effect for S+C traffic streams.
"
::= { hwBoardMacAddressLearningVlanConnectEntry 1 }
hwResourceType OBJECT-TYPE
SYNTAX INTEGER
{
mac(1),
ipneighbourhardware(2),
iproutehardware(3),
iptunnelhardware(4),
vpnhardware(5),
srv6tunnelhardware(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the resource type.
Options:
1. mac(1) -indicates that the resource is the MAC address.
2. ipneighbourhardware(2) -indicates that the resource is the ip neighbour hardware.
3. iproutehardware(3) -indicates that the resource is the ip route hardware.
The type only supports the trap of hwIPRouteHardwareOverloadTrap and hwIPRouteHardwareOverloadRestoreTrap.
4. iptunnelhardware(4) -indicates that the resource is the ip tunnel hardware.
The type only supports the trap of hwIPTunnelHardwareOverloadTrap and hwIPTunnelHardwareOverloadRestoreTrap.
5. vpnhardware(5) -indicates that the resource is the VNI PEER hardware.
The type only supports the trap of hwVPNHardwareOverloadTrap and hwVPNHardwareOverloadRestoreTrap.
6. srv6tunnelhardware(6) -indicates that the resource is the segment-routing ipv6 tunnel hardware.
The type only supports the trap of hwSRv6TunnelHardwareOverloadTrap and hwSRv6TunnelHardwareOverloadRestoreTrap.
"
::= { hwResourceOverloadAwareEntry 1 }
hwResourceOverloadAwareSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch of resource overload awareness.
Options:
1. enable(1) -indicates that the function of monitoring resources is enabled.
2. disable(2) -indicates that the function of monitoring resources is disabled.
Default: disable(2)
"
::= { hwResourceOverloadAwareEntry 2 }
hwResourceOverloadAwareUpperThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the upper threshold of the resource overload awareness.
"
::= { hwResourceOverloadAwareEntry 3 }
hwResourceOverloadAwareLowerThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the lower threshold of the resource overload awareness.
"
::= { hwResourceOverloadAwareEntry 4 }
hwInfinibandTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwInfinibandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this table is ifIndex.
This table is used to query the status parameters of infiniband port."
::= { hwEthernetPort 31 }
hwInfinibandEntry OBJECT-TYPE
SYNTAX HwInfinibandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this entry is ifIndex.
This table is used to query the status parameters of infiniband port."
INDEX {
ifIndex
}
::= { hwInfinibandTable 1 }
HwInfinibandEntry ::=
SEQUENCE {
hwInfinibandPortState
INTEGER
}
hwInfinibandPortState OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the infiniband port.
Options:
1. up(1) -indicates that the operation state is up
2. down(2) -indicates that the operation state is down
"
::= { hwInfinibandEntry 1 }
hwInfinibandTraps OBJECT IDENTIFIER ::= { hwEthernetPort 32 }
hwInfinibandAlarmTraps OBJECT IDENTIFIER ::= { hwInfinibandTraps 1 }
hwInfinibandAlarmTrapsOids OBJECT IDENTIFIER ::= { hwInfinibandAlarmTraps 0 }
hwInfinibandPortLinkDown NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"This trap message is generated when the infiniband port status changes form up to down.
"
::= { hwInfinibandAlarmTrapsOids 1 }
hwInfinibandPortLinkRecover NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"This trap message is generated when the infiniband port status changes form down to up.
"
::= { hwInfinibandAlarmTrapsOids 2 }
--hwPriTagTransDownstream
hwPriTagTransDownstream OBJECT-TYPE
SYNTAX INTEGER
{
priorityTagged(1),
untagged(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority-tag switching policy for downstream packets of VLAN priority service ports.
Options:
1. priorityTagged(1) -indicates the priority-tag of downstream packets are reserved.
2. untagged(2) -indicates the priority-tag of downstream packets are switched to untagged.
Default: priorityTagged(1)
"
::= { hwEthernetPort 33 }
hwEthTrafficSuppressDefaultTable OBJECT IDENTIFIER ::= { hwEthernetPort 34 }
hwEthTrafficSuppressEthPortBroadcastDefaultVaule OBJECT-TYPE
SYNTAX Integer32 (0..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the default broadcast traffic suppression value for ETH ports.
0 indicates no traffic suppression.
"
::= { hwEthTrafficSuppressDefaultTable 1 }
hwEthTrafficSuppressEthPortMulticastDefaultVaule OBJECT-TYPE
SYNTAX Integer32 (0..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unkown multicast broadcast traffic suppression value for ETH ports.
0 indicates no traffic suppression.
"
::= { hwEthTrafficSuppressDefaultTable 2 }
hwEthTrafficSuppressEthPortUnicastDefaultVaule OBJECT-TYPE
SYNTAX Integer32 (0..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unkown unicast broadcast traffic suppression value for ETH ports.
0 indicates no traffic suppression.
"
::= { hwEthTrafficSuppressDefaultTable 3 }
hwEthTrafficSuppressBoardBroadcastDefaultVaule OBJECT-TYPE
SYNTAX Integer32 (0..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the default broadcast traffic suppression value for boards.
0 indicates no traffic suppression.
"
::= { hwEthTrafficSuppressDefaultTable 4 }
hwEthTrafficSuppressBoardMulticastDefaultVaule OBJECT-TYPE
SYNTAX Integer32 (0..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unkown multicast broadcast traffic suppression value for boards.
0 indicates no traffic suppression.
"
::= { hwEthTrafficSuppressDefaultTable 5 }
hwEthTrafficSuppressBoardUnicastDefaultVaule OBJECT-TYPE
SYNTAX Integer32 (0..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unkown unicast broadcast traffic suppression value for boards.
0 indicates no traffic suppression.
"
::= { hwEthTrafficSuppressDefaultTable 6 }
-- hwPortAutoServiceParaTable
hwPortAutoServiceParaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortAutoServiceParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port auto service para table.
The index of this table is ifIndex."
::= { hwEthernetPort 35 }
hwPortAutoServiceParaEntry OBJECT-TYPE
SYNTAX HwPortAutoServiceParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port auto service para table.
The index of this entry is ifIndex."
INDEX {
ifIndex
}
::= { hwPortAutoServiceParaTable 1 }
HwPortAutoServiceParaEntry ::=
SEQUENCE {
hwPortAutoServiceParaRowStatus
RowStatus,
hwPortAutoServiceParaType
INTEGER,
hwPortAutoServiceParaServiceVlan
Integer32,
hwPortAutoServiceParaClientVlanBase
Integer32,
hwPortAutoServiceParaOnuVlanNumber
Integer32,
hwPortAutoServiceParaReceiveTrafficDescrIndex
Integer32,
hwPortAutoServiceParaTransmitTrafficDescrIndex
Integer32,
hwPortAutoServiceParaInboundTrafficTableName
OCTET STRING,
hwPortAutoServiceParaOutboundTrafficTableName
OCTET STRING
}
hwPortAutoServiceParaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object is used to create a new row or to modify or
delete an existing row in this table. "
::= { hwPortAutoServiceParaEntry 1 }
hwPortAutoServiceParaType OBJECT-TYPE
SYNTAX INTEGER
{
singleVlan(1),
doubleVlan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" singleVlan - Creat single service flow
doubleVlan - Creat double service flow"
::= { hwPortAutoServiceParaEntry 2 }
hwPortAutoServiceParaServiceVlan OBJECT-TYPE
SYNTAX Integer32 (1..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Number of service vlan. "
::= { hwPortAutoServiceParaEntry 3 }
hwPortAutoServiceParaClientVlanBase OBJECT-TYPE
SYNTAX Integer32 (-1|1..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Number of Client vlan.
singleVlan mode is not need(-1).
doubleVlan mode must be define."
::= { hwPortAutoServiceParaEntry 4 }
hwPortAutoServiceParaOnuVlanNumber OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Number of ONU max vlan num. "
::= { hwPortAutoServiceParaEntry 5 }
hwPortAutoServiceParaReceiveTrafficDescrIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the index of the IP traffic table.
Range: 1-1024 "
::= { hwPortAutoServiceParaEntry 6 }
hwPortAutoServiceParaTransmitTrafficDescrIndex OBJECT-TYPE
SYNTAX Integer32 (-1|1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the index of the IP traffic table.
Range: 1-1024"
::= { hwPortAutoServiceParaEntry 7 }
hwPortAutoServiceParaInboundTrafficTableName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the name of IP traffic table . "
::= { hwPortAutoServiceParaEntry 8 }
hwPortAutoServiceParaOutboundTrafficTableName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates the name of IP traffic table . "
::= { hwPortAutoServiceParaEntry 9 }
--hwMacLimitActionSwitch
hwMacLimitActionSwitch OBJECT-TYPE
SYNTAX INTEGER
{
activate(1),
deactivate(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If or not to shutdown the port when the number of MAC addresses of the port reaches an upper limit.
Options:
1. activate(1) -not to shutdown the port when the number of MAC addresses of the port reaches an upper limit.
2. deactivate(2) -shutdown the port when the number of MAC addresses of the port reaches an upper limit.
Default: activate(1)
"
::= { hwEthernetPort 36 }
--hwMacLimitSendEvent
hwMacLimitSendEvent OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority-tag switching policy for downstream packets of VLAN priority service ports.
Options:
1. enabled(1) -not to send event when the number of MAC addresses of the port reaches an upper limit.
2. disabled(2) -send event when the number of MAC addresses of the port reaches an upper limit.
Default: disabled(2)
"
::= { hwEthernetPort 37 }
hwDslamTrafficUpportMonitor OBJECT IDENTIFIER ::= { hwEthernetPort 38}
hwDslamTrafficUpportMonitorSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Echo monitoring function of the uplink port.
Options:
1. enable(1) - Indicates that the uplink port is enabled.
2. disable(2) - Indicates that the uplink port is disabled.
Default: disable(2)
"
::= { hwDslamTrafficUpportMonitor 1 }
hwDslamTrafficUpportMonitorPeriod OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the monitoring period of the uplink port.
Unit: minute
Default: 10
"
::= { hwDslamTrafficUpportMonitor 2 }
hwDslamTrafficUpportMonitorThreshold OBJECT-TYPE
SYNTAX Integer32 (10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Traffic monitoring threshold for the uplink port.
Unit: 1/100
Default: 50
"
::= { hwDslamTrafficUpportMonitor 3 }
hwDslamTrafficUpportMonitorMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamTrafficUpportMonitorMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the monitoring table of uplink ports.
The index of this table is hwDslamTrafficUpportMonitorMemberIfIndex.
"
::= { hwDslamTrafficUpportMonitor 4 }
hwDslamTrafficUpportMonitorMemberEntry OBJECT-TYPE
SYNTAX HwDslamTrafficUpportMonitorMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the monitoring table of uplink ports.
The index of this entry is hwDslamTrafficUpportMonitorMemberIfIndex.
"
INDEX { hwDslamTrafficUpportMonitorMemberIfIndex }
::= { hwDslamTrafficUpportMonitorMemberTable 1 }
HwDslamTrafficUpportMonitorMemberEntry ::=
SEQUENCE {
hwDslamTrafficUpportMonitorMemberIfIndex Integer32,
hwDslamTrafficUpportMonitorRowStatus RowStatus
}
hwDslamTrafficUpportMonitorMemberIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the monitoring table of uplink ports.
"
::= { hwDslamTrafficUpportMonitorMemberEntry 1 }
hwDslamTrafficUpportMonitorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, used to query, create, modify, and delete a monitoring table of uplink ports.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a Traffic monitoring table of uplink ports, this leaf need not be issued together.
Options:
1. active(1) - Indicates the query operation.
2. createAndGo(4) - Indicates the creating operation.
3. destroy(6) - Indicates the deleting operation.
"
::= { hwDslamTrafficUpportMonitorMemberEntry 2 }
hwDslamTrafficUpportMonitorRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamTrafficUpportMonitorRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Traffic monitoring table of uplink ports.
The index of this table is hwDslamTrafficUpportMonitorRecordIfIndex, hwDslamTrafficUpportMonitorRecordIndex.
"
::= { hwDslamTrafficUpportMonitor 5 }
hwDslamTrafficUpportMonitorRecordEntry OBJECT-TYPE
SYNTAX HwDslamTrafficUpportMonitorRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Traffic monitoring table of uplink ports.
The index of this entry is hwDslamTrafficUpportMonitorRecordIfIndex, hwDslamTrafficUpportMonitorRecordIndex.
"
INDEX { hwDslamTrafficUpportMonitorRecordIfIndex, hwDslamTrafficUpportMonitorRecordIndex}
::= { hwDslamTrafficUpportMonitorRecordTable 1 }
HwDslamTrafficUpportMonitorRecordEntry ::=
SEQUENCE {
hwDslamTrafficUpportMonitorRecordIfIndex
Integer32,
hwDslamTrafficUpportMonitorRecordIndex
Integer32,
hwDslamTrafficUpportMonitorRecordTime
DateAndTime,
hwDslamTrafficUpportMonitorUpstream
Integer32,
hwDslamTrafficUpportMonitorDownstream
Integer32,
hwDslamTrafficUpportMonitorUpstreamLast
Integer32,
hwDslamTrafficUpportMonitorDownstreamLast
Integer32
}
hwDslamTrafficUpportMonitorRecordIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the level-1 index of the Traffic monitoring table of uplink ports.
"
::= { hwDslamTrafficUpportMonitorRecordEntry 1 }
hwDslamTrafficUpportMonitorRecordIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the level-2 index of the Traffic monitoring table of uplink ports.
"
::= { hwDslamTrafficUpportMonitorRecordEntry 2 }
hwDslamTrafficUpportMonitorRecordTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates period end time of Traffic packet statistics.
"
::= { hwDslamTrafficUpportMonitorRecordEntry 3 }
hwDslamTrafficUpportMonitorUpstream OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates upstream uraffic received by the uplink port.
"
::= { hwDslamTrafficUpportMonitorRecordEntry 4 }
hwDslamTrafficUpportMonitorDownstream OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates downstream traffic received by the uplink port.
"
::= { hwDslamTrafficUpportMonitorRecordEntry 5 }
hwDslamTrafficUpportMonitorUpstreamLast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates last upstream traffic received by the uplink port.
"
::= { hwDslamTrafficUpportMonitorRecordEntry 6 }
hwDslamTrafficUpportMonitorDownstreamLast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates last downstream traffic received by the uplink port.
"
::= { hwDslamTrafficUpportMonitorRecordEntry 7 }
hwDslamTrafficUpportMonitorNotifySwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic Echo monitoring notify function of the uplink port.
Options:
1. enable(1) - Indicates that the traffic monitoring notify function of the uplink port is enabled.
2. disable(2) - Indicates that the traffic monitoring notify function of the uplink port is disabled.
Default: disable(2)
"
::= { hwDslamTrafficUpportMonitor 6 }
hwDslamTrafficUpportMonitorActiveThreshold OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic monitoring active threshold for the uplink port.
Unit: 1/100
Default: 10
"
::= { hwDslamTrafficUpportMonitor 7 }
hwDslamTrafficUpportMonitorStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic monitoring start time for the uplink port.
The start time needs only the hour, minute and second values,
and thus only the fifth, sixth and seventh bytes are used, where,
the fifth byte indicates the hour value of the
start time, the sixth byte indicates the minute value,
and the seventh byte indicates the second value.
Other bytes are reserved and are filled in 0.
For example, if the start time is 08:30:00,
the value is presented as 0x00 0x00 0x00 0x00 0x08 0x1E 0x00 0x00.
The time must be from 00:00:00 to 23:59:59.
"
::= { hwDslamTrafficUpportMonitor 8 }
hwDslamTrafficUpportMonitorEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the traffic monitoring end time for the uplink port.
The end time needs only the hour, minute and second values,
and thus only the fifth, sixth and seventh bytes are used, where,
the fifth byte indicates the hour value of the
start time, the sixth byte indicates the minute value,
and the seventh byte indicates the second value.
Other bytes are reserved and are filled in 0.
For example, if the start time is 08:30:00,
the value is presented as 0x00 0x00 0x00 0x00 0x08 0x1E 0x00 0x00.
The time must be from 00:00:00 to 23:59:59.
"
::= { hwDslamTrafficUpportMonitor 9 }
hwDslamTrafficUpportMonitorPeakRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamTrafficUpportMonitorPeakRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the traffic monitoring peak table of uplink ports.
The index of this table is hwDslamTrafficUpportMonitorPeakRecordIfIndex.
"
::= { hwDslamTrafficUpportMonitor 10 }
hwDslamTrafficUpportMonitorPeakRecordEntry OBJECT-TYPE
SYNTAX HwDslamTrafficUpportMonitorPeakRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the traffic monitoring peak table of uplink ports.
The index of this entry is hwDslamTrafficUpportMonitorPeakRecordIfIndex.
"
INDEX { hwDslamTrafficUpportMonitorPeakRecordIfIndex }
::= { hwDslamTrafficUpportMonitorPeakRecordTable 1 }
HwDslamTrafficUpportMonitorPeakRecordEntry ::=
SEQUENCE {
hwDslamTrafficUpportMonitorPeakRecordIfIndex
Integer32,
hwDslamTrafficUpportMonitorPeakUpstreamRecordTime
DateAndTime,
hwDslamTrafficUpportMonitorPeakUpstream
Integer32,
hwDslamTrafficUpportMonitorPeakDownstreamRecordTime
DateAndTime,
hwDslamTrafficUpportMonitorPeakDownstream
Integer32
}
hwDslamTrafficUpportMonitorPeakRecordIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the traffic monitoring peak table of uplink ports.
"
::= { hwDslamTrafficUpportMonitorPeakRecordEntry 1 }
hwDslamTrafficUpportMonitorPeakUpstreamRecordTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates period end time of upstream traffic peak.
"
::= { hwDslamTrafficUpportMonitorPeakRecordEntry 2 }
hwDslamTrafficUpportMonitorPeakUpstream OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates upstream traffic peak received by the uplink port.
"
::= { hwDslamTrafficUpportMonitorPeakRecordEntry 3 }
hwDslamTrafficUpportMonitorPeakDownstreamRecordTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates period end time of downstream traffic peak.
"
::= { hwDslamTrafficUpportMonitorPeakRecordEntry 4 }
hwDslamTrafficUpportMonitorPeakDownstream OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates downstream traffic peak received by the uplink port.
"
::= { hwDslamTrafficUpportMonitorPeakRecordEntry 5 }
--hwMacAddressClearForOntPortDownSwitch
hwMacAddressClearForOntPortDownSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch of clearing dynamic MAC address for service flows when the ONT port goes offline.
Options:
1. enabled(1) - Indicates that the switch of clearing dynamic MAC address for service flows is enabled.
2. disabled(2) - Indicates that the switch of clearing dynamic MAC address for service flows is disabled.
Default: disabled(2)
"
::= { hwEthernetPort 39 }
--hwDslamNonUnicastUpportMonitor
hwDslamNonUnicastUpportMonitor OBJECT IDENTIFIER ::= { hwEthernetPort 40}
hwDslamNonUnicastUpportMonitorSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the non-uicast monitoring function of the uplink port.
Options:
1. enable(1) - Indicates that the non-unicast monitoring function of the uplink port is enabled.
2. disable(2) - Indicates that the non-unicast monitoring function of the uplink port is disabled.
Default: enable(1)
"
::= { hwDslamNonUnicastUpportMonitor 1 }
hwDslamNonUnicastUpportMonitorPeriod OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the non-unicast monitoring period of the uplink port.
Unit: minute
Default: 1
"
::= { hwDslamNonUnicastUpportMonitor 2 }
hwDslamNonUnicastUpportMonitorBroadcastThdDeftAutoValue OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the broadcast globally-configured default auto monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppression threshold configured on the port
(The unknown multicast monitoring threshold for the port on the ETHB board takes effect 2
levels above the traffic suppression threshold configured on the board).
When no suppression or full suppression is configured on the port,
the globally-configured default-auto-value takes effect.
For the bandwidth range corresponding to the non-unicast threshold,
see hwDslamNonUnicastUpportMonitorBroadcastThdActiveValue description.
Default: 12
"
::= { hwDslamNonUnicastUpportMonitor 3 }
hwDslamNonUnicastUpportMonitorUnknownUnicastThdDeftAutoValue OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unknown unicast globally-configured default auto monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppression threshold configured on the port
(The unknown multicast monitoring threshold for the port on the ETHB board takes effect 2
levels above the traffic suppression threshold configured on the board).
When no suppression or full suppression is configured on the port,
the globally-configured default-auto-value takes effect.
For the bandwidth range corresponding to the non-unicast threshold,
see hwDslamNonUnicastUpportMonitorUnknownUnicastThdActiveValue description.
Default: 12
"
::= { hwDslamNonUnicastUpportMonitor 4 }
hwDslamNonUnicastUpportMonitorUnknownMulticastThdDeftAutoValue OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unknown multicast globally-configured default auto monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppression threshold configured on the port
(The unknown multicast monitoring threshold for the port on the ETHB board takes effect 2
levels above the traffic suppression threshold configured on the board).
When no suppression or full suppression is configured on the port,
the globally-configured default-auto-value takes effect.
For the bandwidth range corresponding to the non-unicast threshold,
see hwDslamNonUnicastUpportMonitorUnknownMulticastThdActiveValue description.
Default: 12
"
::= { hwDslamNonUnicastUpportMonitor 5 }
hwDslamNonUnicastUpportMonitorNotifySwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the non-unicast monitoring notification function of the uplink port.
Options:
1. enable(1) - Indicates that the non-unicast monitoring notification function of the uplink port is enabled.
2. disable(2) - Indicates that the non-unicast monitoring notification function of the uplink port is disabled.
Default: disable(2)
"
::= { hwDslamNonUnicastUpportMonitor 6 }
hwDslamNonUnicastUpportMonitorStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the non-unicast monitoring start time for the uplink port.
The start time needs only the hour, minute, and second values,
and thus only the fifth, sixth, and seventh bytes are used, where,
the fifth byte indicates the hour value of the
start time, the sixth byte indicates the minute value,
and the seventh byte indicates the second value.
Other bytes are reserved and are filled in 0.
For example, if the start time is 08:30:00,
the value is presented as 0x00 0x00 0x00 0x00 0x08 0x1E 0x00 0x00 0x00 0x00 0x00.
The time must be from 00:00:00 to 23:59:59.
"
::= { hwDslamNonUnicastUpportMonitor 7 }
hwDslamNonUnicastUpportMonitorEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the non-unicast monitoring end time for the uplink port.
The end time needs only the hour, minute, and second values,
and thus only the fifth, sixth, and seventh bytes are used, where,
the fifth byte indicates the hour value of the
start time, the sixth byte indicates the minute value,
and the seventh byte indicates the second value.
Other bytes are reserved and are filled in 0.
For example, if the end time is 23:59:59,
the value is presented as 0x00 0x00 0x00 0x00 0x17 0x3B 0x3B 0x00 0x00 0x00 0x00.
The time must be from 00:00:00 to 23:59:59.
"
::= { hwDslamNonUnicastUpportMonitor 8 }
hwDslamNonUnicastUpportMonitorMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamNonUnicastUpportMonitorMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the non-unicast monitoring table of uplink ports.
The index of this table is hwDslamNonUnicastUpportMonitorIfIndex.
"
::= { hwDslamNonUnicastUpportMonitor 9 }
hwDslamNonUnicastUpportMonitorMemberEntry OBJECT-TYPE
SYNTAX HwDslamNonUnicastUpportMonitorMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the non-unicast monitoring table of uplink ports.
The index of this entry is hwDslamNonUnicastUpportMonitorIfIndex.
"
INDEX { hwDslamNonUnicastUpportMonitorIfIndex }
::= { hwDslamNonUnicastUpportMonitorMemberTable 1 }
HwDslamNonUnicastUpportMonitorMemberEntry ::=
SEQUENCE {
hwDslamNonUnicastUpportMonitorIfIndex Integer32,
hwDslamNonUnicastUpportMonitorRowStatus RowStatus,
hwDslamNonUnicastUpportMonitorBroadcastThd Integer32,
hwDslamNonUnicastUpportMonitorUnknownUnicastThd Integer32,
hwDslamNonUnicastUpportMonitorUnknownMulticastThd Integer32,
hwDslamNonUnicastUpportMonitorBroadcastThdActiveValue Integer32,
hwDslamNonUnicastUpportMonitorUnknownUnicastThdActiveValue Integer32,
hwDslamNonUnicastUpportMonitorUnknownMulticastThdActiveValue Integer32
}
hwDslamNonUnicastUpportMonitorIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the non-unicast monitoring table of uplink ports.
"
::= { hwDslamNonUnicastUpportMonitorMemberEntry 1 }
hwDslamNonUnicastUpportMonitorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, used to query, create, modify, and delete a non-unicast monitoring table of uplink ports.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a non-unicast monitoring table of uplink ports, this leaf need not be issued together.
Options:
1. active(1) - Indicates the query operation.
2. createAndGo(4) - Indicates the creating operation.
3. destroy(6) - Indicates the deleting operation.
"
::= { hwDslamNonUnicastUpportMonitorMemberEntry 2 }
hwDslamNonUnicastUpportMonitorBroadcastThd OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the broadcast monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppression threshold configured on the port
(The unknown multicast monitoring threshold for the port on the ETHB board takes effect 2
levels above the traffic suppression threshold configured on the board).
When no suppression or full suppression is configured on the port,
the globally-configured default-auto-value takes effect.0 indicates auto.
For the bandwidth range corresponding to the non-unicast threshold,
see hwDslamNonUnicastUpportMonitorBroadcastThdActiveValue description.
Default: 0
"
::= { hwDslamNonUnicastUpportMonitorMemberEntry 3 }
hwDslamNonUnicastUpportMonitorUnknownUnicastThd OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unknown unicast monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppression threshold configured on the port
(The unknown multicast monitoring threshold for the port on the ETHB board takes effect 2
levels above the traffic suppression threshold configured on the board).
When no suppression or full suppression is configured on the port,
the globally-configured default-auto-value takes effect.0 indicates auto.
For the bandwidth range corresponding to the non-unicast threshold,
see hwDslamNonUnicastUpportMonitorUnknownUnicastThdActiveValue description.
Default: 0
"
::= { hwDslamNonUnicastUpportMonitorMemberEntry 4 }
hwDslamNonUnicastUpportMonitorUnknownMulticastThd OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unknown multicast monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppression threshold configured on the port
(The unknown multicast monitoring threshold for the port on the ETHB board takes effect 2
levels above the traffic suppression threshold configured on the board).
When no suppression or full suppression is configured on the port,
the globally-configured default-auto-value takes effect.0 indicates auto.
For the bandwidth range corresponding to the non-unicast threshold,
see hwDslamNonUnicastUpportMonitorUnknownMulticastThdActiveValue description.
Default: 0
"
::= { hwDslamNonUnicastUpportMonitorMemberEntry 5 }
hwDslamNonUnicastUpportMonitorBroadcastThdActiveValue OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the broadcast monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppression threshold configured on the port
(The unknown multicast monitoring threshold for the port on the ETHB board takes effect 2
levels above the traffic suppression threshold configured on the board).
When no suppression or full suppression is configured on the port,
the globally-configured default-auto-value takes effect.
The effective broadcast monitoring threshold.
The non-unicast threshold definition corresponding bandwidth ranges are listed as follows:
------------------------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Packets/s
------------------------------------------------------------------------------
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 24999 592967 48828
14 49999 1185934 97656
15 99999 2371868 195312
16 199999 4743737 390624
------------------------------------------------------------------------------
"
::= { hwDslamNonUnicastUpportMonitorMemberEntry 6 }
hwDslamNonUnicastUpportMonitorUnknownUnicastThdActiveValue OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the unknown unicast monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppression threshold configured on the port
(The unknown multicast monitoring threshold for the port on the ETHB board takes effect 2
levels above the traffic suppression threshold configured on the board).
When no suppression or full suppression is configured on the port,
the globally-configured default-auto-value takes effect.
The effective unknown unicast monitoring threshold.
The non-unicast threshold definition corresponding bandwidth ranges are listed as follows:
------------------------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Packets/s
------------------------------------------------------------------------------
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 24999 592967 48828
14 49999 1185934 97656
15 99999 2371868 195312
16 199999 4743737 390624
------------------------------------------------------------------------------
"
::= { hwDslamNonUnicastUpportMonitorMemberEntry 7 }
hwDslamNonUnicastUpportMonitorUnknownMulticastThdActiveValue OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the unknown multicast monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppression threshold configured on the port
(The unknown multicast monitoring threshold for the port on the ETHB board takes effect 2
levels above the traffic suppression threshold configured on the board).
When no suppression or full suppression is configured on the port,
the globally-configured default-auto-value takes effect.
The effective unknown multicast monitoring threshold.
The non-unicast threshold definition corresponding bandwidth ranges are listed as follows:
------------------------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Packets/s
------------------------------------------------------------------------------
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 24999 592967 48828
14 49999 1185934 97656
15 99999 2371868 195312
16 199999 4743737 390624
------------------------------------------------------------------------------
"
::= { hwDslamNonUnicastUpportMonitorMemberEntry 8 }
hwDslamNonUnicastUpportMonitorRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamNonUnicastUpportMonitorRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the non-unicast monitoring record table of uplink ports.
The index of this table is hwDslamNonUnicastUpportMonitorRecordIfIndex, hwDslamNonUnicastUpportMonitorRecordIndex.
"
::= { hwDslamNonUnicastUpportMonitor 10 }
hwDslamNonUnicastUpportMonitorRecordEntry OBJECT-TYPE
SYNTAX HwDslamNonUnicastUpportMonitorRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the non-unicast monitoring record table of uplink ports.
The index of this entry is hwDslamNonUnicastUpportMonitorRecordIfIndex, hwDslamNonUnicastUpportMonitorRecordIndex.
"
INDEX { hwDslamNonUnicastUpportMonitorRecordIfIndex, hwDslamNonUnicastUpportMonitorRecordIndex}
::= { hwDslamNonUnicastUpportMonitorRecordTable 1 }
HwDslamNonUnicastUpportMonitorRecordEntry ::=
SEQUENCE {
hwDslamNonUnicastUpportMonitorRecordIfIndex
Integer32,
hwDslamNonUnicastUpportMonitorRecordIndex
Integer32,
hwDslamNonUnicastUpportMonitorRecordTime
DateAndTime,
hwDslamNonUnicastUpportMonitorBroadcastRate
Counter64,
hwDslamNonUnicastUpportMonitorUnknownUnicastRate
Counter64,
hwDslamNonUnicastUpportMonitorUnknownMulticastRate
Counter64
}
hwDslamNonUnicastUpportMonitorRecordIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the level-1 index of the non-unicast monitoring table of uplink ports.
"
::= { hwDslamNonUnicastUpportMonitorRecordEntry 1 }
hwDslamNonUnicastUpportMonitorRecordIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the level-2 index of the non-unicast monitoring table of uplink ports.
"
::= { hwDslamNonUnicastUpportMonitorRecordEntry 2 }
hwDslamNonUnicastUpportMonitorRecordTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates period end time of non-unicast packet statistics.
"
::= { hwDslamNonUnicastUpportMonitorRecordEntry 3 }
hwDslamNonUnicastUpportMonitorBroadcastRate OBJECT-TYPE
SYNTAX Counter64
UNITS "pps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates broadcast packet rate the uplink port.
"
::= { hwDslamNonUnicastUpportMonitorRecordEntry 4 }
hwDslamNonUnicastUpportMonitorUnknownUnicastRate OBJECT-TYPE
SYNTAX Counter64
UNITS "pps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates unknown unicast packet rate the uplink port.
"
::= { hwDslamNonUnicastUpportMonitorRecordEntry 5 }
hwDslamNonUnicastUpportMonitorUnknownMulticastRate OBJECT-TYPE
SYNTAX Counter64
UNITS "pps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates unknown multicast packet rate the uplink port.
"
::= { hwDslamNonUnicastUpportMonitorRecordEntry 6 }
hwDslamNonUnicastUpportMonitorPeakRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDslamNonUnicastUpportMonitorPeakRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table recording the monitored peak non-unicast packets on the uplink port.
The index of this table is hwDslamNonUnicastUpportMonitorPeakRecordIfIndex.
"
::= { hwDslamNonUnicastUpportMonitor 11 }
hwDslamNonUnicastUpportMonitorPeakRecordEntry OBJECT-TYPE
SYNTAX HwDslamNonUnicastUpportMonitorPeakRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the table recording the monitored peak non-unicast packets on the uplink port.
The index of this entry is hwDslamNonUnicastUpportMonitorPeakRecordIfIndex.
"
INDEX { hwDslamNonUnicastUpportMonitorPeakRecordIfIndex }
::= { hwDslamNonUnicastUpportMonitorPeakRecordTable 1 }
HwDslamNonUnicastUpportMonitorPeakRecordEntry ::=
SEQUENCE {
hwDslamNonUnicastUpportMonitorPeakRecordIfIndex
Integer32,
hwDslamNonUnicastUpportMonitorPeakBroadcastRecordTime
DateAndTime,
hwDslamNonUnicastUpportMonitorPeakBroadcastRate
Counter64,
hwDslamNonUnicastUpportMonitorPeakUnknownUnicastRecordTime
DateAndTime,
hwDslamNonUnicastUpportMonitorPeakUnknownUnicastRate
Counter64,
hwDslamNonUnicastUpportMonitorPeakUnknownMulticastRecordTime
DateAndTime,
hwDslamNonUnicastUpportMonitorPeakUnknownMulticastRate
Counter64
}
hwDslamNonUnicastUpportMonitorPeakRecordIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of the table recording the monitored peak non-unicast packets on the uplink port.
"
::= { hwDslamNonUnicastUpportMonitorPeakRecordEntry 1 }
hwDslamNonUnicastUpportMonitorPeakBroadcastRecordTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the end time of peak broadcast packet measurement.
"
::= { hwDslamNonUnicastUpportMonitorPeakRecordEntry 2 }
hwDslamNonUnicastUpportMonitorPeakBroadcastRate OBJECT-TYPE
SYNTAX Counter64
UNITS "pps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates broadcast packet rate the uplink port.
"
::= { hwDslamNonUnicastUpportMonitorPeakRecordEntry 3 }
hwDslamNonUnicastUpportMonitorPeakUnknownUnicastRecordTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the end time of peak unknown unicast packet measurement.
"
::= { hwDslamNonUnicastUpportMonitorPeakRecordEntry 4 }
hwDslamNonUnicastUpportMonitorPeakUnknownUnicastRate OBJECT-TYPE
SYNTAX Counter64
UNITS "pps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates unknow unicast packet rate the uplink port.
"
::= { hwDslamNonUnicastUpportMonitorPeakRecordEntry 5 }
hwDslamNonUnicastUpportMonitorPeakUnknownMulticastRecordTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the end time of peak unknow multicast packet measurement.
"
::= { hwDslamNonUnicastUpportMonitorPeakRecordEntry 6 }
hwDslamNonUnicastUpportMonitorPeakUnknownMulticastRate OBJECT-TYPE
SYNTAX Counter64
UNITS "pps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates unknow multicast packet rate the uplink port.
"
::= { hwDslamNonUnicastUpportMonitorPeakRecordEntry 7 }
hwAggLoadbalancingConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAggLoadbalancingConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the configuration information of an aggregation group loadbalancing.
The index of this table is hwAggLBConfigIndex.
"
::= { hwExtInterface 13 }
hwAggLoadbalancingConfigEntry OBJECT-TYPE
SYNTAX HwAggLoadbalancingConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the configuration information of an aggregation group loadbalancing.
The index of this entry is hwAggLBConfigIndex.
"
INDEX { hwAggLBConfigIndex }
::= { hwAggLoadbalancingConfigTable 1 }
HwAggLoadbalancingConfigEntry ::=
SEQUENCE {
hwAggLBConfigIndex
Integer32,
hwAggLBSrcMacAddress
OCTET STRING,
hwAggLBDstMacAddress
OCTET STRING,
hwAggLBIpAddressType
INTEGER,
hwAggLBProtocol
Integer32,
hwAggLBSrcIpAddress
IpAddress,
hwAggLBDstIpAddress
IpAddress,
hwAggLBSrcIpv6Address
InetAddress,
hwAggLBDstIpv6Address
InetAddress,
hwAggLBSrcPort
Integer32,
hwAggLBDstPort
Integer32,
hwAggLBInportIndex
Unsigned32
}
hwAggLBConfigIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of the master port in an aggregation group.
"
::= { hwAggLoadbalancingConfigEntry 1 }
hwAggLBSrcMacAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (6..17))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source MAC address of the packet.
The following is an example of the input format of the MAC address:
If the MAC address is 00e0-fc11-0000, enter # 0x00 0xe0 0xfc 0x11 0x00 0x00 or the character string 00-e0-fc-11-00-00.
A device may support only one format.
"
::= { hwAggLoadbalancingConfigEntry 2 }
hwAggLBDstMacAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (6..17))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination MAC address of the packet.
The following is an example of the input format of the MAC address:
If the MAC address is 00e0-fc11-0000, enter # 0x00 0xe0 0xfc 0x11 0x00 0x00 or the character string 00-e0-fc-11-00-00.
A device may support only one format.
"
::= { hwAggLoadbalancingConfigEntry 3 }
hwAggLBIpAddressType OBJECT-TYPE
SYNTAX INTEGER
{
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the IP address type.
Options:
1. ipv4(1) -indicates that the IP address type is ipv4
2. ipv6(2) -indicates that the IP address type is ipv6
"
::= { hwAggLoadbalancingConfigEntry 4 }
hwAggLBProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol of the IP packets.
Range: 0-255
The common types include:
ICMP: indicates the Internet Control Message Protocol with protocol ID 1
IGMP: indicates the Internet Group management Protocol with protocol ID 1
TCP: indicates the Transmission Control Protocol with protocol ID 6
UDP: indicates the User Datagram Protocol with protocol ID 17
"
::= { hwAggLoadbalancingConfigEntry 5 }
hwAggLBSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IPv4 address of the packet.
"
::= { hwAggLoadbalancingConfigEntry 6 }
hwAggLBDstIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IPv4 address of the packet.
"
::= { hwAggLoadbalancingConfigEntry 7 }
hwAggLBSrcIpv6Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IPv6 address of the packet.
"
::= { hwAggLoadbalancingConfigEntry 8 }
hwAggLBDstIpv6Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IPv6 address of the packet.
"
::= { hwAggLoadbalancingConfigEntry 9 }
hwAggLBSrcPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specify source port of the packet.
Range: 0-65535
"
::= { hwAggLoadbalancingConfigEntry 10 }
hwAggLBDstPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specify destination port of the packet.
Range: 0-65535
"
::= { hwAggLoadbalancingConfigEntry 11 }
hwAggLBInportIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IfIndex of the input port.
"
::= { hwAggLoadbalancingConfigEntry 12 }
hwAggLoadbalancingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAggLoadbalancingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to get the result of the packet selection port for an aggregation group.
The index of this table is hwAggLBIndex.
"
::= { hwExtInterface 14 }
hwAggLoadbalancingEntry OBJECT-TYPE
SYNTAX HwAggLoadbalancingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to get the result of the packet selection port for an aggregation group.
The index of this entry is hwAggLBIndex.
"
INDEX { hwAggLBIndex }
::= { hwAggLoadbalancingTable 1 }
HwAggLoadbalancingEntry ::=
SEQUENCE {
hwAggLBIndex
Integer32,
hwAggLBSelectIndex
Integer32
}
hwAggLBIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of the master port in an aggregation group.
"
::= { hwAggLoadbalancingEntry 1 }
hwAggLBSelectIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the packet selection port for an aggregation group.
"
::= { hwAggLoadbalancingEntry 2 }
--hwPort10GLicControlObjects
hwPort10GLicControlObjects OBJECT IDENTIFIER ::= { hwEthernetPort 41}
hwPort10GLicPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of 10G uplink port."
::= { hwPort10GLicControlObjects 1 }
hwPort10GLicRtuAuthSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates 10G uplink port rtu license switch
Options:
1. enable(1) - Indicates that the switch of 10G uplink port rtu license is eabled.
2. disable(2) - Indicates that the switch of 10G uplink port rtu license is disabled.
Default: disable(2)
"
::= { hwPort10GLicControlObjects 2 }
hwExtProtocolForceForwardingPolicyTable OBJECT IDENTIFIER ::= { hwEthernetPort 42 }
hwExtPimUserForceForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the forcible transparent transmission switch of PIM protocol packets on the user side.
Options:
1. enable(1) -Indicates that the forcible transparent transmission of PIM protocol packets on the user side is enabled.
2. disable(2) -Indicates that the forcible transparent transmission of PIM protocol packets on the user side is disabled.
Default: enable(1)
"
::= { hwExtProtocolForceForwardingPolicyTable 1 }
hwExtPimUplinkForceForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the forcible transparent transmission switch of PIM protocol packets on the network side.
Options:
1. enable(1) -Indicates that the forcible transparent transmission of PIM protocol packets on the network side is enabled.
2. disable(2) -Indicates that the forcible transparent transmission of PIM protocol packets on the network side is disabled.
Default: enable(1)
"
::= { hwExtProtocolForceForwardingPolicyTable 2 }
hwExtLdpUserForceForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the forcible transparent transmission switch of LDP protocol packets on the user side.
Options:
1. enable(1) -Indicates that the forcible transparent transmission of LDP protocol packets on the user side is enabled.
2. disable(2) -Indicates that the forcible transparent transmission of LDP protocol packets on the user side is disabled.
Default: enable(1)
"
::= { hwExtProtocolForceForwardingPolicyTable 3 }
hwExtLdpUplinkForceForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the forcible transparent transmission switch of LDP protocol packets on the network side.
Options:
1. enable(1) -Indicates that the forcible transparent transmission of LDP protocol packets on the network side is enabled.
2. disable(2) -Indicates that the forcible transparent transmission of LDP protocol packets on the network side is disabled.
Default: enable(1)
"
::= { hwExtProtocolForceForwardingPolicyTable 4 }
hwExtVrrpUserForceForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the forcible transparent transmission switch of VRRP protocol packets on the user side.
Options:
1. enable(1) -Indicates that the forcible transparent transmission of VRRP protocol packets on the user side is enabled.
2. disable(2) -Indicates that the forcible transparent transmission of VRRP protocol packets on the user side is disabled.
Default: enable(1)
"
::= { hwExtProtocolForceForwardingPolicyTable 5 }
hwExtVrrpUplinkForceForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the forcible transparent transmission switch of VRRP protocol packets on the network side.
Options:
1. enable(1) -Indicates that the forcible transparent transmission of VRRP protocol packets on the network side is enabled.
2. disable(2) -Indicates that the forcible transparent transmission of VRRP protocol packets on the network side is disabled.
Default: enable(1)
"
::= { hwExtProtocolForceForwardingPolicyTable 6 }
hwExtNtpUserForceForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the forcible transparent transmission switch of NTP-multicast protocol packets on the user side.
Options:
1. enable(1) -Indicates that the forcible transparent transmission of NTP-multicast protocol packets on the user side is enabled.
2. disable(2) -Indicates that the forcible transparent transmission of NTP-multicast protocol packets on the user side is disabled.
Default: enable(1)
"
::= { hwExtProtocolForceForwardingPolicyTable 7 }
hwExtNtpUplinkForceForwarding OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the forcible transparent transmission switch of NTP-multicast protocol packets on the network side.
Options:
1. enable(1) -Indicates that the forcible transparent transmission of NTP-multicast protocol packets on the network side is enabled.
2. disable(2) -Indicates that the forcible transparent transmission of NTP-multicast protocol packets on the network side is disabled.
Default: enable(1)
"
::= { hwExtProtocolForceForwardingPolicyTable 8 }
hwAggregatePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAggregatePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port information of an aggregation group.
The indexes of this table are hwAggregateIndex and hwAggregatePortIndex.
"
::= { hwExtInterface 15 }
hwAggregatePortEntry OBJECT-TYPE
SYNTAX HwAggregatePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port information of an aggregation group.
The indexes of this entry are hwAggregateIndex and hwAggregatePortIndex.
"
INDEX { hwAggregateIndex, hwAggregatePortIndex }
::= { hwAggregatePortTable 1 }
HwAggregatePortEntry ::=
SEQUENCE {
hwAggregateIndex
InterfaceIndex,
hwAggregatePortIndex
InterfaceIndex,
hwAggregatePortStatus
INTEGER
}
hwAggregateIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of the master port in an aggregation group."
::= { hwAggregatePortEntry 1 }
hwAggregatePortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of the port in an aggregation group."
::= { hwAggregatePortEntry 2 }
hwAggregatePortStatus OBJECT-TYPE
SYNTAX INTEGER
{
forwarding(1),
block(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the forwarding status of port in an aggregation group.
Options:
1. forwarding(1) -Indicates that the forwarding status of the port in an aggregation group is forwarding.
2. block(2) -Indicates that the forwarding status of the port in an aggregation group is blocked."
::= { hwAggregatePortEntry 3 }
END
View Git Blame Copy Permalink