730 lines
27 KiB
Plaintext
730 lines
27 KiB
Plaintext
-- =================================================================
|
|
-- Copyright (C) 2022 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
--
|
|
-- Description: Huawei DHCP Relay MIB
|
|
-- Reference: HUAWEI Enterprise MIB
|
|
-- Version: V3.05
|
|
-- History:
|
|
-- v1.1
|
|
-- modified by huangjun 2009-12-08
|
|
-- =================================================================
|
|
|
|
HUAWEI-DHCPR-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
hwDhcp
|
|
FROM HUAWEI-MIB
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
OBJECT-GROUP, MODULE-COMPLIANCE,NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
RowStatus,DisplayString
|
|
FROM SNMPv2-TC
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB;
|
|
|
|
|
|
hwDHCPRelayMib MODULE-IDENTITY
|
|
LAST-UPDATED "202210310000Z" -- OCT 31, 2022 at 00:00 GMT
|
|
ORGANIZATION
|
|
"Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
|
|
DESCRIPTION
|
|
"This MIB describes objects used for managing DHCP relay,
|
|
including configuring ip addresses for DHCP relay,
|
|
selecting allocation mode of dhcp service, and some statistic information."
|
|
REVISION "202210310000Z" -- OCT 31, 2022 at 00:00 GMT
|
|
DESCRIPTION
|
|
"Add these nodes: hwDHCPRelayProxyUsrThreshold, hwDHCPRelayProxyUsrThresholdResume, hwDHCPRelayProxyUsrExhaust, hwDHCPRelayProxyUsrExhaustResume."
|
|
REVISION "202202140000Z" -- FEB 14, 2022 at 00:00 GMT
|
|
DESCRIPTION
|
|
"Update the attribute of these nodes: hwPDRouteExceed and hwPDRouteExceedResume."
|
|
|
|
REVISION "202102100000Z" -- FEB 10, 2021 at 00:00 GMT
|
|
DESCRIPTION
|
|
"Update the attribute of these nodes: hwDHCPRelayIpUnnumberedUsrNum, hwDHCPRelayMaxIpUnnumberedUsrNum, hwDHCPv6RelayUsrNum, hwDHCPv6RelayMaxUsrNum, hwDHCPv6RelayIpNum and hwDHCPv6RelayMaxIpNum."
|
|
|
|
REVISION "202101190000Z" -- JAN 19, 2021 at 00:00 GMT
|
|
DESCRIPTION
|
|
"Add these nodes: hwDHCPRelayIpUnnumberedUsrThreshold, hwDHCPRelayIpUnnumberedUsrThresholdResume, hwDHCPRelayIpUnnumberedUsrExhaust,
|
|
hwDHCPRelayIpUnnumberedUsrExhaustResume, hwDHCP6RelayUsrTblThreshold, hwDHCP6RelayUsrTblThresholdResume, hwDHCP6RelayUsrTblExhaust,
|
|
hwDHCP6RelayUsrTblExhaustResume, hwDHCP6RelayUsrIPThreshold, hwDHCP6RelayUsrIPThresholdResume, hwDHCP6RelayUsrIPExhaust and hwDHCP6RelayUsrIPExhaustResume."
|
|
|
|
REVISION "202007080000Z" -- JUL 08, 2020 at 00:00 GMT
|
|
DESCRIPTION
|
|
"This version add the hwPDRouteExceedResume node."
|
|
|
|
REVISION "201907190000Z" -- JUL 19, 2019 at 00:00 GMT
|
|
DESCRIPTION
|
|
"This version add the hwPDRouteExceed node."
|
|
|
|
REVISION "201408120000Z" -- AUG 12, 2014 at 00:00 GMT
|
|
DESCRIPTION
|
|
"This version add the hwDHCPRelayReleaseLocalPktNum node."
|
|
|
|
REVISION "201310170000Z" -- OCT 17, 2013 at 00:00 GMT
|
|
DESCRIPTION
|
|
"V2.03 - V2.04 add the hwDHCP6RDUID node."
|
|
|
|
REVISION "201306290000Z" -- June 29, 2013 at 00:00 GMT
|
|
DESCRIPTION
|
|
"Update the descriptions of these nodes: hwDHCPRTxClientPktNum, hwDHCPRTxClientUniPktNum and hwDHCPRTxClientBroPktNum."
|
|
|
|
|
|
REVISION "200307210000Z"
|
|
DESCRIPTION
|
|
"The initial revision of this MIB module."
|
|
|
|
REVISION "200302120000Z" -- February 12, 2003 at 00:00 GMT
|
|
DESCRIPTION
|
|
"The initial revision of this MIB module."
|
|
::= { hwDhcp 1 }
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
hwDHCPRelayMibObject OBJECT IDENTIFIER ::= { hwDHCPRelayMib 1 }
|
|
|
|
-- =================================================================
|
|
-- 1st Table of hwDHCPRelayMibObjects: hwDHCPRIPTable
|
|
-- =================================================================
|
|
hwDHCPRIPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwDHCPRIPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for configuring ip addresses for DHCP relay,
|
|
The ip address means address of DHCP server."
|
|
::= { hwDHCPRelayMibObject 1 }
|
|
|
|
hwDHCPRIPEntry OBJECT-TYPE
|
|
SYNTAX HwDHCPRIPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for configuring ip addresses for DHCP
|
|
relay."
|
|
INDEX { ifIndex, hwDHCPRIPAddr }
|
|
::= { hwDHCPRIPTable 1 }
|
|
|
|
HwDHCPRIPEntry ::=
|
|
SEQUENCE {
|
|
hwDHCPRIPAddr
|
|
IpAddress,
|
|
hwDHCPRIPRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwDHCPRIPAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip address for DHCP relay, The ip address means address of DHCP server."
|
|
::= { hwDHCPRIPEntry 1 }
|
|
|
|
hwDHCPRIPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configuration new rows in this
|
|
table, modify existing rows, and to delete
|
|
existing rows.Only three actions are used: active(1),
|
|
createAndGo(4), destroy(6)."
|
|
::= { hwDHCPRIPEntry 2 }
|
|
|
|
-- =================================================================
|
|
-- 2nd Table of hwDHCPRelayMibObjects: hwDHCPRSeletAllocateModeTable
|
|
-- =================================================================
|
|
hwDHCPRSeletAllocateModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwDHCPRSeletAllocateModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for selecting allocation mode of dhcp
|
|
service."
|
|
::= { hwDHCPRelayMibObject 2 }
|
|
|
|
hwDHCPRSeletAllocateModeEntry OBJECT-TYPE
|
|
SYNTAX HwDHCPRSeletAllocateModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for configuring the allocation mode of
|
|
DHCP service."
|
|
INDEX { ifIndex }
|
|
::= { hwDHCPRSeletAllocateModeTable 1 }
|
|
|
|
HwDHCPRSeletAllocateModeEntry ::=
|
|
SEQUENCE {
|
|
hwDHCPRSelectAllocateMode
|
|
INTEGER
|
|
}
|
|
|
|
hwDHCPRSelectAllocateMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
global(0),
|
|
interface(1),
|
|
relay(2),
|
|
none(3),
|
|
globalAndRelay(4),
|
|
interfaceAndRelay(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allocation mode of DHCP service.
|
|
|
|
global(0) - allocation address from global
|
|
interface(1)- allocation address from interface
|
|
relay(2) - allocation address from dhcp server, the request is relayed to server
|
|
none(3) - no allocation address mode
|
|
globalAndRelay(4) - allocation address from global and relay
|
|
interfaceAndRelay(5)- allocation address from interface and relay.
|
|
"
|
|
::= { hwDHCPRSeletAllocateModeEntry 1 }
|
|
|
|
--
|
|
-- Non-table objects
|
|
--
|
|
hwDHCPRelayCycleStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(0),
|
|
off(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of DHCP relay cycle mode,
|
|
when the value is 0, cycle with the serveral DHCP servers addresses,
|
|
when the value is 1, use one same DHCP server."
|
|
::= { hwDHCPRelayMibObject 3 }
|
|
|
|
hwDHCPRRxBadPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the bad packets received by
|
|
DHCP relay."
|
|
::= { hwDHCPRelayMibObject 4 }
|
|
|
|
hwDHCPRRxServerPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the packets received from
|
|
DHCP servers by DHCP relay module."
|
|
::= { hwDHCPRelayMibObject 5 }
|
|
|
|
hwDHCPRTxServerPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the packets transmited to
|
|
DHCP servers by DHCP relay module."
|
|
::= { hwDHCPRelayMibObject 6 }
|
|
|
|
hwDHCPRRxClientPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the packets received form DHCP
|
|
clients by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 7 }
|
|
|
|
hwDHCPRTxClientPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the packets transmited
|
|
to DHCP clients by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 8 }
|
|
|
|
hwDHCPRTxClientUniPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the unicast packets transmited
|
|
to DHCP clients by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 9 }
|
|
|
|
hwDHCPRTxClientBroPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the brodcast packets transmited
|
|
to DHCP clients by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 10 }
|
|
|
|
hwDHCPRelayDiscoverPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Discover packets handled
|
|
by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 11 }
|
|
|
|
hwDHCPRelayRequestPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Request packets handled
|
|
by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 12 }
|
|
|
|
hwDHCPRelayDeclinePktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Decline packets handled
|
|
by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 13 }
|
|
|
|
hwDHCPRelayReleasePktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Release packets handled
|
|
by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 14 }
|
|
|
|
hwDHCPRelayInformPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Inform packets handled
|
|
by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 15 }
|
|
|
|
hwDHCPRelayOfferPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Offer packets handled
|
|
by DHCP server."
|
|
::= { hwDHCPRelayMibObject 16 }
|
|
|
|
hwDHCPRelayAckPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Ack packets handled
|
|
by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 17 }
|
|
|
|
hwDHCPRelayNakPktNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Nak packets handled
|
|
by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 18 }
|
|
|
|
hwDHCPRelayStatisticsReset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
invalid(0),
|
|
reset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset the above statictics information of handled
|
|
packets by DHCP relay.
|
|
The value 1 means clear the statictics information.
|
|
"
|
|
::= { hwDHCPRelayMibObject 19 }
|
|
|
|
hwDHCPArpProcessStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP process DHCP status.
|
|
The value 1 means enable ARP process DHCP status.
|
|
"
|
|
::= { hwDHCPRelayMibObject 20 }
|
|
|
|
hwDHCPRServerDetectStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether detection against the pseudo DHCP server is enabled.
|
|
The default value is disabled(2)."
|
|
::= { hwDHCPRelayMibObject 21 }
|
|
|
|
-- =================================================================
|
|
-- 3rd Table of hwDHCPRelayMibObjects: hwDHCPRDSCPTable
|
|
-- =================================================================
|
|
hwDHCPRDSCPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwDHCPRDSCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for configuring dhcp reply packet's Dscp value."
|
|
::= { hwDHCPRelayMibObject 22 }
|
|
|
|
hwDHCPRDSCPEntry OBJECT-TYPE
|
|
SYNTAX HwDHCPRDSCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for configuring dhcp reply packet's Dscp value."
|
|
INDEX { ifIndex }
|
|
::= { hwDHCPRDSCPTable 1 }
|
|
|
|
HwDHCPRDSCPEntry ::=
|
|
SEQUENCE {
|
|
hwDhcpDscp
|
|
Integer32
|
|
}
|
|
|
|
hwDhcpDscp OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63|255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dhcp reply packet's dscp value.
|
|
<0-63> - Valid dscp value
|
|
<255> - Set dscp value to default.
|
|
"
|
|
::= { hwDHCPRDSCPEntry 1 }
|
|
|
|
-- =================================================================
|
|
-- 4rd Table of hwDHCPRelayMibObjects: hwDhcpRenewReplyTable
|
|
-- =================================================================
|
|
hwDhcpRenewReplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwDhcpRenewReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for configuring dhcp renew-reply packet local deal."
|
|
::= { hwDHCPRelayMibObject 23 }
|
|
|
|
hwDhcpRenewReplyEntry OBJECT-TYPE
|
|
SYNTAX HwDhcpRenewReplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for configuring dhcp renw-reply packet local deal."
|
|
INDEX { ifIndex, hwDhcpRenewReplyEnable }
|
|
::= { hwDhcpRenewReplyTable 1 }
|
|
|
|
HwDhcpRenewReplyEntry ::=
|
|
SEQUENCE {
|
|
hwDhcpRenewReplyEnable INTEGER,
|
|
hwDhcpRenewReplyRowStatus RowStatus
|
|
}
|
|
|
|
hwDhcpRenewReplyEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether to enable dhcp renew-reply packet local-deal on this interface"
|
|
DEFVAL { disable }
|
|
::= { hwDhcpRenewReplyEntry 1 }
|
|
|
|
hwDhcpRenewReplyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dhcp renew-reply object is used to configuration new rows in this
|
|
table, modify existing rows, and to delete
|
|
existing rows.Only three actions are used: active(1),
|
|
createAndGo(4), destroy(6)."
|
|
::= { hwDhcpRenewReplyEntry 2 }
|
|
|
|
hwDHCP6RDUID OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1 | 8..28))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Config Dhcpv6 Duid."
|
|
::= { hwDHCPRelayMibObject 24}
|
|
|
|
hwDHCPRelayReleaseLocalPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP local release packets handled
|
|
by DHCP relay."
|
|
::= { hwDHCPRelayMibObject 25 }
|
|
|
|
hwDHCPRelayTrapObjects OBJECT IDENTIFIER ::= { hwDHCPRelayMibObject 26 }
|
|
|
|
hwDHCPRelayIpUnnumberedUsrNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of DHCP relay IP unnumbered tables on the device."
|
|
::= { hwDHCPRelayTrapObjects 1 }
|
|
|
|
hwDHCPRelayMaxIpUnnumberedUsrNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of DHCP relay IP unnumbered tables on the device."
|
|
::= { hwDHCPRelayTrapObjects 2 }
|
|
|
|
hwDHCPv6RelayUsrNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of DHCPv6 relay tables on the device."
|
|
::= { hwDHCPRelayTrapObjects 3 }
|
|
|
|
hwDHCPv6RelayMaxUsrNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of DHCPv6 relay tables on the device."
|
|
::= { hwDHCPRelayTrapObjects 4 }
|
|
|
|
hwDHCPv6RelayIpNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of DHCPv6 relay IP tables on the device."
|
|
::= { hwDHCPRelayTrapObjects 5 }
|
|
|
|
hwDHCPv6RelayMaxIpNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of DHCPv6 relay IP tables on the device."
|
|
::= { hwDHCPRelayTrapObjects 6 }
|
|
|
|
hwDHCPRelayProxyUsrNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of DHCP relay proxy tables on the device."
|
|
::= { hwDHCPRelayTrapObjects 7 }
|
|
|
|
hwDHCPRelayMaxProxyUsrNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of DHCP relay proxy tables on the device."
|
|
::= { hwDHCPRelayTrapObjects 8 }
|
|
|
|
hwDHCPRelayMIBConformance OBJECT IDENTIFIER ::= { hwDHCPRelayMib 2 }
|
|
|
|
hwDHCPRelayMIBCompliances OBJECT IDENTIFIER ::= { hwDHCPRelayMIBConformance 1 }
|
|
hwDHCPRelayMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for systems supporting
|
|
this module."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hwDHCPRelayMIBGroup}
|
|
|
|
::= { hwDHCPRelayMIBCompliances 1 }
|
|
hwDHCPRelayMIBGroups OBJECT IDENTIFIER ::= { hwDHCPRelayMIBConformance 2 }
|
|
|
|
hwDhcpRelayTraps OBJECT IDENTIFIER ::= { hwDHCPRelayMib 3 }
|
|
|
|
hwPDRouteExceed NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of PD route for DHCPv6 relay reached the maximum."
|
|
::= { hwDhcpRelayTraps 1 }
|
|
|
|
hwPDRouteExceedResume NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of PD route for DHCPv6 relay descends to alarm threshold."
|
|
::= { hwDhcpRelayTraps 2 }
|
|
|
|
hwDHCPRelayIpUnnumberedUsrThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPRelayIpUnnumberedUsrNum, hwDHCPRelayMaxIpUnnumberedUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that an alarm is generated when the number of DHCP relay IP unnumbered tables on the device exceeds 80% of the upper limit."
|
|
::= { hwDhcpRelayTraps 3 }
|
|
|
|
hwDHCPRelayIpUnnumberedUsrThresholdResume NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPRelayIpUnnumberedUsrNum, hwDHCPRelayMaxIpUnnumberedUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that a clear alarm is generated when the number of DHCP relay IP unnumbered tables on the device falls below 70% of the upper limit."
|
|
::= { hwDhcpRelayTraps 4 }
|
|
|
|
hwDHCPRelayIpUnnumberedUsrExhaust NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPRelayMaxIpUnnumberedUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that an alarm is generated when the number of DHCP relay IP unnumbered tables on the device reaches the upper limit."
|
|
::= { hwDhcpRelayTraps 5 }
|
|
|
|
hwDHCPRelayIpUnnumberedUsrExhaustResume NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPRelayMaxIpUnnumberedUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that a clear alarm is generated when the number of DHCP relay IP unnumbered tables on the device falls below 90% of the upper limit."
|
|
::= { hwDhcpRelayTraps 6 }
|
|
|
|
hwDHCP6RelayUsrTblThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPv6RelayUsrNum, hwDHCPv6RelayMaxUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that an alarm is generated when the number of DHCPv6 relay tables on the device exceeds 80% of the upper limit."
|
|
::= { hwDhcpRelayTraps 7 }
|
|
|
|
hwDHCP6RelayUsrTblThresholdResume NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPv6RelayUsrNum, hwDHCPv6RelayMaxUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that a clear alarm is generated when the number of DHCPv6 relay tables on the device falls below 70% of the upper limit."
|
|
::= { hwDhcpRelayTraps 8 }
|
|
|
|
hwDHCP6RelayUsrTblExhaust NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPv6RelayMaxUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that an alarm is generated when the number of DHCPv6 relay tables on the device reaches the upper limit."
|
|
::= { hwDhcpRelayTraps 9 }
|
|
|
|
hwDHCP6RelayUsrTblExhaustResume NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPv6RelayMaxUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that a clear alarm is generated when the number of DHCPv6 relay tables on the device falls below 90% of the upper limit."
|
|
::= { hwDhcpRelayTraps 10 }
|
|
|
|
hwDHCP6RelayUsrIPThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPv6RelayIpNum, hwDHCPv6RelayMaxIpNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that an alarm is generated when the number of DHCPv6 relay IP tables on the device exceeds 80% of the upper limit."
|
|
::= { hwDhcpRelayTraps 11 }
|
|
|
|
hwDHCP6RelayUsrIPThresholdResume NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPv6RelayIpNum, hwDHCPv6RelayMaxIpNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that a clear alarm is generated when the number of DHCPv6 relay IP tables on the device falls below 70% of the upper limit."
|
|
::= { hwDhcpRelayTraps 12 }
|
|
|
|
hwDHCP6RelayUsrIPExhaust NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPv6RelayMaxIpNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that an alarm is generated when the number of DHCPv6 relay IP tables on the device reaches the upper limit."
|
|
::= { hwDhcpRelayTraps 13 }
|
|
|
|
hwDHCP6RelayUsrIPExhaustResume NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPv6RelayMaxIpNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that a clear alarm is generated when the number of DHCPv6 relay IP tables on the device falls below 90% of the upper limit."
|
|
::= { hwDhcpRelayTraps 14 }
|
|
|
|
hwDHCPRelayProxyUsrThreshold NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPRelayProxyUsrNum, hwDHCPRelayMaxProxyUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that an alarm is generated when the number of DHCP relay proxy tables on the device exceeds 80% of the upper limit."
|
|
::= { hwDhcpRelayTraps 15 }
|
|
|
|
hwDHCPRelayProxyUsrThresholdResume NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPRelayProxyUsrNum, hwDHCPRelayMaxProxyUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that a clear alarm is generated when the number of DHCP relay proxy tables on the device falls below 70% of the upper limit."
|
|
::= { hwDhcpRelayTraps 16 }
|
|
|
|
hwDHCPRelayProxyUsrExhaust NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPRelayMaxProxyUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that an alarm is generated when the number of DHCP relay proxy tables on the device reaches the upper limit."
|
|
::= { hwDhcpRelayTraps 17 }
|
|
|
|
hwDHCPRelayProxyUsrExhaustResume NOTIFICATION-TYPE
|
|
OBJECTS { hwDHCPRelayMaxProxyUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that a clear alarm is generated when the number of DHCP relay proxy tables on the device falls below 90% of the upper limit."
|
|
::= { hwDhcpRelayTraps 18 }
|
|
hwDHCPRelayMIBGroup OBJECT-GROUP
|
|
OBJECTS { hwDHCPRIPAddr, hwDHCPRIPRowStatus, hwDHCPRSelectAllocateMode, hwDHCPRelayCycleStatus, hwDHCPRRxBadPktNum,
|
|
hwDHCPRRxServerPktNum, hwDHCPRTxServerPktNum, hwDHCPRRxClientPktNum, hwDHCPRTxClientPktNum, hwDHCPRTxClientUniPktNum,
|
|
hwDHCPRTxClientBroPktNum, hwDHCPRelayDiscoverPktNum, hwDHCPRelayRequestPktNum, hwDHCPRelayDeclinePktNum, hwDHCPRelayReleasePktNum,
|
|
hwDHCPRelayInformPktNum, hwDHCPRelayOfferPktNum, hwDHCPRelayAckPktNum, hwDHCPRelayNakPktNum, hwDHCPRelayStatisticsReset, hwDHCPArpProcessStatus, hwDHCPRServerDetectStatus,
|
|
hwDhcpDscp, hwDhcpRenewReplyEnable, hwDhcpRenewReplyRowStatus,hwDHCP6RDUID, hwDHCPRelayReleaseLocalPktNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic collection of objects providing management of
|
|
DHCP relay."
|
|
::= { hwDHCPRelayMIBGroups 1 }
|
|
|
|
hwDhcpRelayTrapGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { hwPDRouteExceed, hwPDRouteExceedResume, hwDHCPRelayIpUnnumberedUsrThreshold, hwDHCPRelayIpUnnumberedUsrThresholdResume,
|
|
hwDHCPRelayIpUnnumberedUsrExhaust, hwDHCPRelayIpUnnumberedUsrExhaustResume, hwDHCP6RelayUsrTblThreshold, hwDHCP6RelayUsrTblThresholdResume,
|
|
hwDHCP6RelayUsrTblExhaust, hwDHCP6RelayUsrTblExhaustResume, hwDHCP6RelayUsrIPThreshold, hwDHCP6RelayUsrIPThresholdResume,
|
|
hwDHCP6RelayUsrIPExhaust, hwDHCP6RelayUsrIPExhaustResume, hwDHCPRelayProxyUsrThreshold, hwDHCPRelayProxyUsrThresholdResume,
|
|
hwDHCPRelayProxyUsrExhaust, hwDHCPRelayProxyUsrExhaustResume }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DHCPRelay's Notification group."
|
|
::= { hwDHCPRelayMIBGroups 2 }
|
|
|
|
hwDHCPRelayTrapObjectGroup OBJECT-GROUP
|
|
OBJECTS { hwDHCPRelayIpUnnumberedUsrNum, hwDHCPRelayMaxIpUnnumberedUsrNum, hwDHCPv6RelayUsrNum, hwDHCPv6RelayMaxUsrNum, hwDHCPv6RelayIpNum,
|
|
hwDHCPv6RelayMaxIpNum, hwDHCPRelayProxyUsrNum, hwDHCPRelayMaxProxyUsrNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for DHCP relay alarm."
|
|
::= { hwDHCPRelayMIBGroups 3 }
|
|
|
|
END
|