WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HUAWEI-BULKSTATISTICS-MIB

3908 lines
195 KiB
Plaintext
Raw Blame History

-- ============================================================================
-- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: Huawei bulk performance statistics MIB object includes bulk
-- performance statistics file configuration, FTP client management,
-- and threshold alarm configuration and management.
-- The NMS creates a performance statistics file, statistical object,
-- and statistical content through the MIB interface, and starts the performance statistics.
-- The host collects the content of the statistical object,
-- creates a file of the statistical content at a fixed interval for collecting statistics,
-- and then reports a trap to the NMS for it to obtain data.
-- The NMS can also back up the statistics file to the NMS server through the MIB interface.
-- A threshold needs to be set for monitoring the performance data.
-- When the data exceeds the threshold, an alarm indicating that the data exceeds the
-- threshold is generated and reported to the NMS automatically.
-- The information item that needs to be collected can be configured through the NMS.
-- The collection task can be started or stopped through the NMS.
-- The item that needs to be collected can be backed up through the NMS.
-- Reference:
-- Version: V1.98
-- ============================================================================
HUAWEI-BULKSTATISTICS-MIB DEFINITIONS ::= BEGIN
IMPORTS
huaweiUtility, hwCfgInfoCollect
FROM HUAWEI-MIB
IpAddress, Integer32, Unsigned32, Counter64,
OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, TruthValue, DisplayString
FROM SNMPv2-TC
hwLoadBackupResult
FROM HUAWEI-LOAD-BACKUP-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
hwBulkStatistics MODULE-IDENTITY
LAST-UPDATED "201907010000Z"
ORGANIZATION "Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"
Huawei bulk performance statistics MIB object includes bulk
performance statistics file configuration, FTP client management,
and threshold alarm configuration and management.
The NMS creates a performance statistics file, statistical object,
and statistical content through the MIB interface, and starts the performance statistics.
The host collects the content of the statistical object,
creates a file of the statistical content at a fixed interval for collecting statistics,
and then reports a trap to the NMS for it to obtain data.
The NMS can also back up the statistics file to the NMS server through the MIB interface.
A threshold needs to be set for monitoring the performance data.
When the data exceeds the threshold, an alarm indicating that the data exceeds the
threshold is generated and reported to the NMS automatically.
The information item that needs to be collected can be configured through the NMS.
The collection task can be started or stopped through the NMS.
The item that needs to be collected can be backed up through the NMS.
"
-- Revision history
REVISION "201907010000Z"
DESCRIPTION "V1.98, Add the following enums of the hwBulkObjectCapItemList:
pmpSatnUs(138),
pmpSatnDs(139),"
REVISION "201906110000Z"
DESCRIPTION "V1.97, Add the description of hwBatchQueryReturnList."
REVISION "201904110000Z"
DESCRIPTION "V1.96, Add the following enums of the hwBulkObjectCapItemList:
pmpGponNniDnFecCorrectCount(703),
pmpGponNniDnFecUncorrectCount(704)"
REVISION "201902280000Z"
DESCRIPTION "V1.95, Modified description in hwCollectMode."
REVISION "201809190000Z"
DESCRIPTION "V1.94, Modified description in hwFTPClientServerInetAddressType."
REVISION "201808210000Z"
DESCRIPTION "V1.93, Added hwFTPClientServerInetAddressType and hwFTPClientServerInetAddress object in hwFTPClientTable."
REVISION "201807020000Z"
DESCRIPTION "V1.92, Add the following enums of the hwBulkObjectCapItemList:
pmpSraNe(114),
pmpSraFe(115),
pmpFraNe(116),
pmpFraFe(117),
pmpLprNe(118),
pmpLprFe(119),
pmpFastInit(120),
pmpFailedFastInit(121),
pmpLosNe(122),
pmpLosFe(123),
pmpLandeftrsNe(124),
pmpLandeftrsFe(125),
pmpAndeftrdsNe(126),
pmpAndeftrdsFe(127),
pmpMinandeftrNe(128),
pmpMinandeftrFe(129),
pmpMaxandeftrNe(130),
pmpMaxandeftrFe(131),
pmpSumandeftrNe(132),
pmpSumandeftrFe(133),
pmpAturVerNumHex(134)"
REVISION "201806060000Z"
DESCRIPTION "V1.91, Add the following enums of the hwBulkObjectCapItemList:
pmpGponUniSendGreenBytes(1145),
pmpGponUniSendGreenPackets(1146),
pmpGponUniTxDiscardGreenPackets(1147),
pmpGponUniSendYellowBytes(1148),
pmpGponUniSendYellowPackets(1149),
pmpGponUniTxYellowGreenPackets(1150)"
REVISION "201712200000Z"
DESCRIPTION "V1.90, Add the following enums of the hwBulkObjectCapItemList:
pmpD31MaxSpeed(997),
pmpCmIpv4Addr(998)"
REVISION "201712120000Z"
DESCRIPTION "V1.89, Add the following enums of the hwBulkObjectCapItemList:
pmpGponUni1gChannelUsRate(1129),
pmpGponUni1gChannelDsRate(1130),
pmpGponUni1gChannelTranOcts(1131),
pmpGponUni1gChannelRecvOcts(1132),
pmpGponUni1gChannelTranPacket(1133),
pmpGponUni1gChannelRecvPacket(1134),
pmpGponUni1gChannelRxDiscardPackets(1135),
pmpGponUni1gChannelTxDiscardPackets(1136),
pmpGponUni10gChannelUsRate(1137),
pmpGponUni10gChannelDsRate(1138),
pmpGponUni10gChannelTranOcts(1139),
pmpGponUni10gChannelRecvOcts(1140),
pmpGponUni10gChannelTranPacket(1141),
pmpGponUni10gChannelRecvPacket(1142),
pmpGponUni10gChannelRxDiscardPackets(1143),
pmpGponUni10gChannelTxDiscardPackets(1144)"
REVISION "201712050000Z"
DESCRIPTION "V1.88, Changed the following enumerated names of the hwBulkObjectCapItemList:
Changed pmpCmUsProfileId to pmpCmDsProfileId.
Changed pmpUsIucQamCapa to pmpUsIucCapa.
Changed pmpDsProfileQamCapa to pmpDsProfileCapa.
Changed pmpCableD20CmNum to pmpCmD20Num.
Changed pmpCableD30CmNum to pmpCmD30Num.
Changed pmpCableD31CmNum to pmpCmD31Num."
REVISION "201711230000Z"
DESCRIPTION "V1.87, Add the following enums of the hwBulkObjectCapItemList:
pmpCmDocsisVer(987),
pmpCmUsIucId(988),
pmpCmUsProfileId(989),
pmpUsIucQam(990),
pmpDsProfileQam(991),
pmpUsIucQamCapa(992),
pmpDsProfileQamCapa(993),
pmpCableD20CmNum(994),
pmpCableD30CmNum(995),
pmpCableD31CmNum(996)"
REVISION "201709260000Z"
DESCRIPTION "V1.86, Add the following enums of the hwBulkObjectCapItemList:
pmpQueueStatsPassedGreenBytes(1006),
pmpQueueStatsPassedGreenNumber(1007),
pmpQueueStatsPassedYellowBytes(1008),
pmpQueueStatsPassedYellowNumber(1009)"
REVISION "201707300000Z"
DESCRIPTION "V1.85, Add the following enums of the hwBulkObjectCapItemList:
pmpXponOnuWifiTransmissionCurrChannel(1122),
pmpXponOnuWifiTransmissionBandwidth(1123),
pmpXponOnuWifiTransmissionNoise(1124),
pmpXponOnuWifiTransmissionGlitch(1125),
pmpXponOnuWifiTransmissionACSScore(1126),
pmpXponOnuWifiStaInfoTxPhyRate(1127),
pmpXponOnuWifiStaInfoRxPhyRate(1128)"
REVISION "201707140000Z"
DESCRIPTION "V1.84, Add the following enums of the hwBulkObjectCapItemList:
pmpQueueStatsDroppedYellowPackets(1000),
pmpQueueStatsDroppedGreenPackets(1001),
pmpQueueStatsDroppedUnRecognizedColorPackets(1002),
pmpQueueStatsPassedPackets(1003),
pmpQueueStatsPassedBytes(1004),
pmpQueueStatsIntervalValid(1005)
Add the follow description of the hwBulkFileObjectMainType:
201 0 Port Queue Statistics
Add the follow description of the hwBulkFileObjectSubType:
201 0 Port Queue Statistics"
REVISION "201706120000Z"
DESCRIPTION "V1.83, Add the enum of the hwBatchQueryType: ontPotsPortState(8),
add the enum of the hwBatchQueryCurrentType: ontPotsPortState(8)."
REVISION "201704070000Z"
DESCRIPTION "V1.82, Add the following enums of the hwBulkObjectCapItemList:
pmpMonitoredTime(112),
pmpVectoringOprMode(113)"
REVISION "201609240000Z"
DESCRIPTION "V1.81, Add the following enums of the hwBulkObjectCapItemList:
pmpEponUni2gChannelUsRate(885),
pmpEponUni2gChannelUsErrorPacketsRatio(886),
pmpEponUni2gChannelUsDiscardBytes(887),
pmpEponUni2gChannelUsDiscardPackets(888),
pmpEponUni2gChannelUsErrorPackets(889),"
REVISION "201609170000Z"
DESCRIPTION "V1.80, Add the following enums of the hwBulkFileNmsGetInterval:
twoHour(6),
twelveHour(7),"
REVISION "201609020000Z"
DESCRIPTION "V1.79, Add the following enums of the hwBulkObjectCapItemList:
pmpEthTranMaxRate(349),
pmpEthRecvMaxRate(350),
pmpEthTranMaxBandwidthUsage(351),
pmpEthRecvMaxBandwidthUsage(352),
pmpEthTranMaxRateTime(353),
pmpEthRecvMaxRateTime(354),"
REVISION "201608240000Z"
DESCRIPTION "V1.78, Add the following enums of the hwBulkObjectCapItemList:
pmpCableChlUsRecvbyte(1100),
pmpCableChlUsSnr(1101),
pmpCableChlUsGoodFeccode(1102),
pmpCableChlUsCorrectedFeccode(1103),
pmpCableChlUsUncorrectedFeccode(1104),
pmpCableChlUsCorrectedErrcodepercent(1105),
pmpCableChlUsUncorrectedErrcodepercent(1106),
pmpCableChlUsPer(1107),
pmpCableChlUsUtilization(1108),
pmpCableChlUsCmnumTotal(1109),
pmpCableChlUsCmnumOnline(1110),
pmpCableChlUsCmnumOffline(1111),
pmpCableChlUsCmnumInit(1112),
pmpCableChlUsCmnumReject(1113),
pmpCableChlUsReregtimes(1114),
pmpCableChlDsSendbyte(1115),
pmpCableChlDsUtilization(1116),
pmpCableChlDsCmnumTotal(1117),
pmpCableChlDsCmnumOnline(1118),
pmpCableChlDsCmnumOffline(1119),
pmpCableChlDsCmnumInit(1120),
pmpCableChlDsCmnumReject(1121).
Add the following description of the hwBulkFileObjectMainType:
197 8 Cable Channel
Add the following description of the hwBulkFileObjectSubType:
197 8 Cable Channel."
REVISION "201607130000Z"
DESCRIPTION "V1.77, Add the enum of the hwBatchQueryType: trafficBurstInfo(7),
add the enum of the hwBatchQueryCurrentType: trafficBurstInfo(7)."
REVISION "201607110000Z"
DESCRIPTION "V1.76, Add the following enums of the hwCollectState:
waitcollect(5)"
REVISION "201604270000Z"
DESCRIPTION "V1.75, Add the following enums of the hwBulkObjectCapItemList:
pmpUsRateProf(100),
pmpDsRateProf(101),
pmpInpDelayProf(102),
pmpLineSpectrumProf(103),
pmpUpboProf(104),
pmpDpboprof(105),
pmpRfiProf(106),
pmpNoiseMarginProf(107),
pmpVirtualNoiseProf(108),
pmpInmProf(109),
pmpSosProf(110),
pmpCpeChip(111),
pmpPortDesc(603),
pmpLineCardName(604),
pmpLineCardHardwareVersion(605)"
REVISION "201603300000Z"
DESCRIPTION "V1.74, Modify the description of hwBatchQueryParameter"
REVISION "201601270000Z"
DESCRIPTION "V1.73, Add the following enums of the hwBulkObjectCapItemList:
pmpMaxDsSNR(970),
pmpMinDsSNR(971),
pmpPrimaryDs(972),
pmpPrimaryUs(973),
pmpRxByte(974),
pmpTxByte(975),
pmpSuccessReg(976),
pmpFailReg(977),
pmpRepeatReg(978),
pmpStationMaintenance(979),
pmpStationMaintenanceMiss(980),
pmpStationMaintainConMiss(981),
pmpPowerAdjust(982),
pmpSeverelyPowerAdjust(983),
pmpUnstableConnection(984),
pmpMaxUsSNR(985),
pmpMinUsSNR(986)"
REVISION "201511300000Z"
DESCRIPTION "V1.72, Delete BITS from HUAWEI-BULKSTATISTICS-MIB DEFINITIONS"
REVISION "201511230000Z"
DESCRIPTION "V1.71, Added MIB nodes to support the incremental collect information"
REVISION "201509280000Z"
DESCRIPTION "V1.70, Modify the description of hwBatchQueryParameter hwBatchQueryParameter"
REVISION "201506240000Z"
DESCRIPTION "V1.69, Add the following enums of the hwBulkObjectCapItemList:
pmpSigAttnUs(92),
pmpSigAttnDs(93),
pmpLineAttnPbUs(94),
pmpLineAttnPbDs(95),
pmpSignalAttnPbUs(96),
pmpSignalAttnPbDs(97),
pmpSnrMarginPbUs(98),
pmpSnrmarginPbDs(99),"
REVISION "201504250000Z"
DESCRIPTION "V1.68, Modify the description of hwBulkFileObjectMainType:
6 160 G.fast port
6 161 G.fast Xlin-data
6 162 G.fast Segment
Modify the follow description of the hwBulkFileObjectSubType:
6 160 G.fast port
6 161 G.fast Xlin-data
6 162 G.fast Segment."
REVISION "201504030000Z"
DESCRIPTION "V1.67, Modify the description of following MIB nodes:
hwBatchQueryType,hwBatchQueryCurrentType and hwBatchQueryParameter"
REVISION "201503310000Z"
DESCRIPTION "V1.66, Modify the example description of hwBatchQueryParameter"
REVISION "201503260000Z"
DESCRIPTION "V1.65, Modify the description of following MIB nodes:
hwBatchQueryType,hwBatchQueryCurrentType and hwBatchQueryParameter"
REVISION "201503090000Z"
DESCRIPTION "V1.64, Add the following enums of the hwBulkObjectCapItemList:
pmp-cm-status(950),
pmp-cm-us-width(951),
pmp-cm-us-frequency(952),
pmp-cm-us-cmts-Eqd(953),
pmp-cm-us-act-Eqd(954),
pmp-cm-us-snr(955),
pmp-cm-us-tx-power(956),
pmp-cm-us-goodcode(957),
pmp-cm-us-corrected(958),
pmp-cm-us-uncorrected(959),
pmp-cm-us-ccer(960),
pmp-cm-us-ucer(961),
pmp-cm-ds-frequency(962),
pmp-cm-ds-snr(963),
pmp-cm-ds-rx-power(964),
pmp-cm-ds-ccer(965),
pmp-cm-ds-ucer(966),
pmp-cm-ds-goodcode(967),
pmp-cm-ds-corrected(968),
pmp-cm-ds-uncorrected(969),
Add the follow description of the hwBulkFileObjectMainType:
197 7 Cable Modem
Add the follow description of the hwBulkFileObjectSubType:
197 7 Cable Modem."
REVISION "201502090000Z"
DESCRIPTION "V1.63, Add the following description of the hwBulkFileObjectMainType:
191 7 GPON ONU Wifi Statistics
191 8 GPON ONU Wifi STA Info
191 9 GPON ONU Wifi Neighbor AP info
192 7 EPON ONU Wifi Package Statistics
192 8 EPON ONU Wifi STA Info
192 9 EPON ONU Wifi Neighbor AP info
Add the following description of the hwBulkFileObjectSubType:
191 7 GPON ONU Wifi Statistics
191 8 GPON ONU Wifi STA Info
191 9 GPON ONU Wifi Neighbor AP info
192 7 EPON ONU Wifi Statistics
192 8 EPON ONU Wifi STA Info
192 9 EPON ONU Wifi Neighbor AP info
Modified the description of the hwBulkFileObjectMainType:
182 1 XPON ONT Optical Module Dynamic Info
182 2 XPON UNI Optical Module Dynamic Info
182 3 EPON ONT Optical Module Dynamic Info
182 4 EPON UNI Optical Module Dynamic Info
191 1 GPON UNI PORT Statistics
191 2 GPON ONU Statistics
191 15 XPON ONT ETH PORT Statistics
192 1 EPON UNI PORT Statistics
192 2 EPON ONU Statistics
192 11 EPON ONT ETH PORT Statistics
Add the following enums of the hwBulkObjectCapItemList:
pmpXponOnuWifiTxTotalPackets(871),
pmpXponOnuWifiTxErrPackets(872),
pmpXponOnuWifiTxDiscardPackets(873),
pmpXponOnuWifiRxTotalPackets(874),
pmpXponOnuWifiRxErrPackets(875),
pmpXponOnuWifiRxDiscardPackets(876),
pmpXponOnuWifiTransQualityLevel(877),
pmpXponOnuWifiDsRate(878),
pmpXponOnuWifiUsRate(879),
pmpXponOnuWifiRSSI(880),
pmpXponOnuWifiSNR(881),
pmpXponOnuWifiSignalQualityLevel(882),
pmpXponOnuWifiIneighborAP(883),
pmpXponOnuWifiAPFactor(884).
Add the following description of the hwBulkFileConditionTable and hwBulkFileConditionEntry:
Statistical conditions can be issued in hexadecimal notation or using a character string.
Changed the range of hwBulkFileCollectCondition from (1..254) to (1..200).
"
REVISION "201501050000Z"
DESCRIPTION "V1.62, added hwBulkFileCollectCondition and hwBulkFileCollectRowStatus object in
hwBulkFileConditionTable.added hwFTPClientNum object in hwFTPClientTable. added
hwFTPClientMaxNum object"
REVISION "201412180000Z"
DESCRIPTION "V1.61, Correct the node hwBulkObjectCapItemRowStatus read-write to read-create."
REVISION "201411110000Z"
DESCRIPTION "V1.60, Add the follow description of the hwBulkFileObjectMainType:
6 176 G.fast port
6 181 G.fast Xlin-data
7 101 G.fast Segment
Add the follow description of the hwBulkFileObjectSubType:
6 176 G.fast port
6 181 G.fast Xlin-data
7 101 G.fast Segment."
REVISION "201408250000Z"
DESCRIPTION "V1.59, modified the description of hwBulkBackupSuccessCommonTrap."
REVISION "201406300000Z"
DESCRIPTION "V1.58, 1. removed all hyphens (-) from enumerated values of hwBulkFileColNumMode.
2. removed all hyphens (-) from enumerated values of hwBulkObjectCapItemList.
3. removed all hyphens (-) from enumerated values of hwBulkFileObjectMainType.
4. modified 'MAX-ACCESS not-accessible' to 'MAX-ACCESS accessible-for-notify' of hwBulkSaveFileIndex.
5. removed all hyphens (-) from enumerated values of hwBulkFileNameRule.
6. modified 'MAX-ACCESS not-accessible' to 'MAX-ACCESS accessible-for-notify' of hwFTPClientIndex.
7. removed all hyphens (-) from enumerated values of hwDefineMontype.
8. modified 'MAX-ACCESS not-accessible' to 'MAX-ACCESS accessible-for-notify' of hwBatchQuerySn."
REVISION "201405260000Z"
DESCRIPTION "V1.57, Add the Object hwWaitfetchTimeout."
REVISION "201403280000Z"
DESCRIPTION "V1.56, Add the following enums of the hwBulkObjectCapItemList: pmp-gain-al-us(215), pmp-gain-al-ds(216)."
REVISION "201403030000Z"
DESCRIPTION "V1.55, modified the description of hwBulkFileTable.
modified the description of hwBulkFileEntry.
modified the description of hwBulkFileObjectMainType.
modified the description of hwBulkFileObjectSubType.
modified the description of hwBulkFileNameRule."
REVISION "201401160000Z"
DESCRIPTION "V1.54, Add the following enums of the hwBulkObjectCapItemList: pmp-rtxactuaeftr-ds(90), pmp-rtxactuaeftr-us(91)."
REVISION "201311190000Z"
DESCRIPTION "V1.53, Modify description to the hwBatchQueryParameter, add description to the hwBatchQueryReturnList."
REVISION "201309040000Z"
DESCRIPTION "V1.52, Change the maximum length of hwCollectOID from 128 to 127."
REVISION "201306270000Z"
DESCRIPTION "V1.51, Add the following enums of the hwBulkObjectCapItemList:
pmp-rtxleftr-ds(84), pmp-rtxleftr-us(85), pmp-rtxefb-ds(86), pmp-rtxefb-us(87),
pmp-rtxmineftr-ds(88), pmp-rtxmineftr-us(89)."
REVISION "201304160000Z"
DESCRIPTION "V1.50, Modified the description of hwBulkFileObjectMainType,hwBulkFileObjectSubType.
Add the following enums of the hwBulkObjectCapItemList:
pmp-xlin-data(261)."
REVISION "201301210000Z"
DESCRIPTION "V1.49, Add the following enums of the hwBulkObjectCapItemList:
pmp-epon-uni-optics-10g-tx-power(780),pmp-epon-uni-laser-10g-bias-curr(781),
pmp-epon-nni-peer-optics-tx-power(800),
pmp-epon-uni-1g-channel-us-rate(851),
pmp-epon-uni-1g-channel-err-pkt-ratio(852),
pmp-epon-uni-1g-channel-us-bytes(853),
pmp-epon-uni-1g-channel-ds-bytes(854),
pmp-epon-uni-1g-channel-ds-rate(855),
pmp-epon-uni-1g-channel-us-packets(856),
pmp-epon-uni-1g-channel-ds-packets(857),
pmp-epon-uni-1g-channel-us-error-packets(858),
pmp-epon-uni-1g-channel-us-discard-packets(859),
pmp-epon-uni-1g-channel-ds-discard-packets(860),
pmp-epon-uni-10g-channel-us-rate(861),
pmp-epon-uni-10g-channel-err-pkt-ratio(862),
pmp-epon-uni-10g-channel-us-bytes(863),
pmp-epon-uni-10g-channel-ds-bytes(864),
pmp-epon-uni-10g-channel-ds-rate(865),
pmp-epon-uni-10g-channel-us-packets(866),
pmp-epon-uni-10g-channel-ds-packets(867),
pmp-epon-uni-10g-channel-us-error-packets(868),
pmp-epon-uni-10g-channel-us-discard-packets(869),
pmp-epon-uni-10g-channel-ds-discard-packets(870).
Modify the enum name of pmp-xpon-uni-laser-bias-curr to pmp-xpon-uni-optics-bias-curr,
Modify the enum name of pmp-epon-uni-laser-bias-curr to pmp-epon-uni-optics-bias-curr,
Modify the enum name of pmp-xpon-nni-laser-bias-curr to pmp-xpon-nni-optics-bias-curr,
Modify the enum name of pmp-epon-nni-laser-bias-curr to pmp-epon-nni-optics-bias-curr,
Modify the enum name of pmp-epon-uni-laser-10g-bias-curr to pmp-epon-uni-optics-10g-bias-curr.
"
REVISION "201212200000Z"
DESCRIPTION "V1.48, Add the following enums of the hwBulkObjectCapItemList:
single-ended-framelossratio-near-max(750),
single-ended-framelossratio-near-min(751),
single-ended-framelossratio-near-average(752),
single-ended-framelossratio-far-max(753),
single-ended-framelossratio-far-min(754),
single-ended-framelossratio-far-average(755),
two-way-delay-max(756),
two-way-delay-min(757),
two-way-delay-average(758),
two-way-jitter-max(759),
two-way-jitter-min(760),
two-way-jitter-average(761),
one-way-delay-far-max(762),
one-way-delay-far-min(763),
one-way-delay-far-average(764),
one-way-jitter-far-max(765),
one-way-jitter-far-min(766),
one-way-jitter-far-average(767),
one-way-delay-near-max(768),
one-way-delay-near-min(769),
one-way-delay-near-average(770),
one-way-jitter-near-max(771),
one-way-jitter-near-min(772),
one-way-jitter-near-average(773)
Add the follow description of the hwBulkFileObjectMainType:
200 0 Y1731 PM
Add the follow description of the hwBulkFileObjectSubType:
200 0 Y1731 PM"
REVISION "201212030000Z"
DESCRIPTION "V1.47, Add the following enums of the hwBulkObjectCapItemList:
pmp-fec-unevt-ner-us(63),
pmp-fec-unevt-far-ds(64),
pmp-en-blk-ner-us(65),
pmp-en-blk-far-ds(66),
pmp-rtx-cw-ner-us(67),
pmp-rtx-cw-far-ds(68),
pmp-rtx-ccw-ner-us(69),
pmp-rtx-ccw-far-ds(70),
pmp-rtx-unccw-ner-us(71),
pmp-rtx-unccw-far-ds(72),
pmp-xtur-vds-num(73),
pmp-xtur-ver-num(74),
pmp-act-delay-us(75),
pmp-act-delay-ds(76)
pmp-adsl-extprf-name(77),
pmp-band-plan(78),
pmp-act-psd-ds(79),
pmp-act-psd-us(80),
pmp-xtur-svd-num(81),
pmp-port-state(82),
pmp-cpe-type(83),
pmp-txpsd-us(211),
pmp-txpsd-ds(212),
pmp-qln-vector-us(213),
pmp-qln-vector-ds(214)"
REVISION "201210120000Z"
DESCRIPTION "V1.46, Add the enum of the hwBatchQueryType:macinfo(4),
add the enum of the hwBatchQueryCurrentType:macinfo(4)."
REVISION "201207180000Z"
DESCRIPTION "V1.45, Add the following enums of the hwBulkObjectCapItemList:
pmp-elem1-support(61),
pmp-interval-valid(62),
pmp-eth-interval-valid(348),
modified the following enums of the hwBulkObjectCapItemList:
pmp-tran-green-send-discard-eth-number(308),
pmp-tran-yellow-send-discard-eth-number(311),
pmp-xpon-uni-optics-temp(363),
pmp-xpon-uni-laser-bias-curr(364),
pmp-xpon-uni-optics-volt(365),
pmp-xpon-uni-optics-tx-power(366),
pmp-xpon-nni-optics-temp(394),
pmp-xpon-nni-laser-bias-curr(395),
pmp-xpon-nni-optics-volt(396),
pmp-xpon-nni-optics-tx-power(397),
pmp-xpon-nni-optics-rx-power(398),
pmp-xpon-olt-nni-optics-rx-power(399),
pmp-xpon-onu-eth-port-us-rate(424),
pmp-xpon-onu-eth-port-ds-rate(425),
pmp-xpon-onu-eth-port-rx-total(426),
pmp-xpon-onu-eth-port-rx-unic(427),
pmp-xpon-onu-eth-port-rx-brdc(428),
pmp-xpon-onu-eth-port-rx-mltc(429),
pmp-xpon-onu-eth-port-tx-total(430),
pmp-xpon-onu-eth-port-tx-unic(431),
pmp-xpon-onu-eth-port-tx-brdc(432),
pmp-xpon-onu-eth-port-tx-mltc(433),
pmp-xpon-onu-eth-port-rx-octs(434),
pmp-xpon-onu-eth-port-tx-octs(435),
pmp-xpon-onu-eth-port-rx-error-packets(436)."
REVISION "201206190000Z"
DESCRIPTION "V1.44, 1.Change the maximum length of hwCollectTableName from 64 to 63.
2.Modify the error for the syntax."
REVISION "201205080000Z"
DESCRIPTION "V1.43, Add the following enums of the hwBulkObjectCapItemList:
pmp-gpon-nni-recv-error-packets(700),
pmp-gpon-nni-tran-packets(701),
pmp-gpon-nni-recv-packets(702),
pmp-epon-nni-recv-error-packets(730),
pmp-epon-nni-tran-packets(731),
pmp-epon-nni-recv-packets(732),
pmp-epon-uni-tran-packets(388),
pmp-epon-uni-recv-packets(389),
Modified the enum pmp-lols-fer-us(19) of the hwBulkObjectCapItemList."
REVISION "201204250000Z"
DESCRIPTION "V1.42, 1.add the description to the hwCollectTableName."
REVISION "201204170000Z"
DESCRIPTION "V1.41, 1.Change the maximum length of hwCollectTableName from 31 to 64.
2.Change the maximum length of hwCollectTableInfo from 255 to 510."
REVISION "201203290000Z"
DESCRIPTION "V1.40, The description of hwTrapAutoBackupFileName is modified.
Add the following enum of the hwBulkObjectCapItemList:
pmp-pcb-ds(57),
pmp-modu-mode(58),
pmp-pbo-ds(59),
pmp-pbo-us(60)."
REVISION "201203150000Z"
DESCRIPTION "V1.39, Modified the following type of the hwBatchQueryCurrentType and hwBatchQueryType from INTEGER to integer32,
and add the description of ontLearnedMac(3)."
REVISION "201203060000Z"
DESCRIPTION "V1.38, Add the following enums of the hwBulkObjectCapItemList:
board-cpu-occupation(600),
board-temperature(601),
board-dsp-occupation(602),
board-mgif-failed-num(650)."
REVISION "201201300000Z"
DESCRIPTION "V1.37, Add standard trap nodes:
hwTrapAutoBackupFileName,hwBulkAutobackupSuccessTrap and hwBulkAutobackupFailTrap.
Add the following enums of the hwBulkFileFormat:bulkASCIIWithZipFile(3).
Changed the name of bulkASCII to bulkASCIIWithDeflate(2)"
REVISION "201201290000Z"
DESCRIPTION "V1.36, Modified the description of hwBulkFileObjectMainType,hwBulkFileObjectSubType.
Add the following enums of the hwBulkObjectCapItemList:
270~271,312~347,373,384~387,390~391,400~407,416~418,434~436,450~452,500~508,520~524"
REVISION "201201170000Z"
DESCRIPTION "V1.35, Add the following enums of the hwBulkObjectCapItemList:
pmp-resyn-ratio(56)."
REVISION "201111070000Z"
DESCRIPTION "V1.34, Modified the description of hwBulkFileObjectMainType,hwBulkFileObjectSubType and hwFTPDestFileName.
Add the following enums of the hwBulkObjectCapItemList:
pmp-gpon-olt-nni-optics-rx-power(399),
pmp-epon-olt-nni-optics-rx-power(415)"
REVISION "201110210000Z"
DESCRIPTION "V1.33, Add the Object hwBulkFileNameRule,modified the value list of hwBulkFileCollectInterval."
REVISION "201109010000Z"
DESCRIPTION "V1.32, Add the Object hwBatchQueryFile."
REVISION "201108230000Z"
DESCRIPTION "V1.31, Add the following enums of the hwBulkObjectCapItemList:
pmp-rtxused-us(54),
pmp-rtxused-ds(55)."
REVISION "201107100000Z"
DESCRIPTION "V1.30, Add the following enums of the hwBulkObjectCapItemList:
pmp-tran-discard-eth-port-packets(305),
pmp-tran-green-send-eth-port-octs(306),
pmp-tran-green-send-eth-port-number(307),
pmp-tran-green-send-discard-eth-numbe(308),
pmp-tran-yellow-send-eth-port-octs(309),
pmp-tran-yellow-send-eth-port-number(310),
pmp-tran-yellow-send-discard-eth-numbe(311),
pmp-gpon-uni-tx-discard-packets(372),
pmp-epon-uni-tx-discard-packets(383)."
REVISION "201106300000Z"
DESCRIPTION "V1.29, modified the description of this MIB"
REVISION "201105270000Z"
DESCRIPTION "V1.28, Add the following enums of the hwBulkObjectCapItemList:
pmp-inminpeq-us(48),pmp-inminpeq-ds(49),pmp-inmiat-us(50),pmp-inmiat-ds(51),pmp-inmme-us(52),pmp-inmme-ds(53),
pmp-gpon-uni-tran-octs(367),pmp-gpon-uni-recv-octs(368),pmp-gpon-uni-tran-packets(369),pmp-gpon-uni-recv-packets(370),pmp-gpon-uni-discard-packets(371),"
REVISION "201105130000Z"
DESCRIPTION "V1.27, modified the description of this MIB"
REVISION "201102190000Z"
DESCRIPTION "V1.26, Added MIB nodes to support the statistics of SPUA."
REVISION "201011090000Z"
DESCRIPTION "V1.25, The description of this MIB is modified according to the tool."
REVISION "201008250000Z"
DESCRIPTION "V1.24, modified the contact-info and the revision history. Modified the description of leaves.
Modified the description of hwBulkFileObjectMainType and hwBulkFileObjectSubType
and add the values of the hwBulkObjectCapItemList for PON product."
REVISION "201006120000Z"
DESCRIPTION "V1.23, modified and supplemented the description in the object.
Abandoned object hwBulkAndTCARelationship and all the objects in hwDefineTCATable and hwBackupCollectInfoParaTable.
Changed the name of hwBulkBackupSucesComnTrap to hwBulkBackupSuccessCommonTrap.
Changed the name of hwBulkFileFailAlmTrap to hwBulkFileFailAlarmTrap.
Changed the name of hwBulkBackupStartComnTrap to hwBulkBackupStartCommonTrap."
REVISION "201003030000Z"
DESCRIPTION "V1.22, implemented DT requirements and changed the syntax and semantics of SIMPLETEST."
REVISION "201002250000Z"
DESCRIPTION "V1.21, modified the description of hwBulkFileObjectMainType and hwBulkFileObjectSubType."
REVISION "201002200000Z"
DESCRIPTION "V1.20, Changed the private parameters hwFTPClientIndex, hwFTPClientFileName,
and hwFTPDestFileName of hwBulkBackupStartComnTrap to hwBulkSaveFileName
and hwBulkSaveFileTime."
REVISION "201002200000Z"
DESCRIPTION "V1.19, changed the range of hwCollectTableName from 1-32 to 1-31."
REVISION "201002030000Z"
DESCRIPTION "V1.18, implemented DT requirements.
Added or modified MIB nodes to support the status-enumerated value of the GET operation."
REVISION "201001290000Z"
DESCRIPTION "V1.17, added the definitions of standard trap nodes
and associated trap parameter nodes."
REVISION "201001250000Z"
DESCRIPTION "V1.16, 1, this MIB does not meet the requirements of SIMPLETEST.
Cleared alarms and errors of MIB BROWSER.
Added MIB description according to new requirements."
REVISION "200911050000Z"
DESCRIPTION "V1.15, added Recover hwBulkFileObjectMainType and hwBulkFileObjectSubType object in
hwBulkFileTable, added hwBulkObjectCapItemList object, and added hwBulkObjectCapItemTable."
REVISION "200907130000Z"
DESCRIPTION "V1.13, modified the format of hwFtpDestFileName, character limit in the
names of source file and target file under multi-document mode, and
description of the name format of individual files."
REVISION "200905080000Z"
DESCRIPTION "V1.12, added description of emunerated values for
hwDefineFacilityType and hwDefineMontype objects."
REVISION "200903190000Z"
DESCRIPTION "V1.11, modified the order of OIDs of hwBulkFileIndex, hwBulkAndTCARelationship
and hwBulkSaveFileTable, and recovered the functions of hwBulkFileTableNextIndex,
hwBulkFileCount and hwBulkObjectIndexCount objects."
REVISION "200903090000Z"
DESCRIPTION "V1.10, modified part of description of MIB table for batch performance statistics."
REVISION "200902160000Z"
DESCRIPTION "V1.09, modified MIB table of batch performance statistics,
and added new table for performance monitoring."
REVISION "200803260000Z"
DESCRIPTION "V1.08, added notes for the operation of real-time query.
Modified the position of leaf in hwCollectOperationSet to
support the operation of walk in mibbrowser."
REVISION "200801180000Z"
DESCRIPTION "V1.07, added objects to support the backup of files collected by the NMS through FTP."
REVISION "200712170000Z"
DESCRIPTION "V1.05, added configuration of data-collection object and data-collection operation object."
REVISION "200701220000Z"
DESCRIPTION "V1.04, added two leaves of main type and subtype,
and deleted the option of 'one day' in collecting time and saving time."
REVISION "200611240000Z"
DESCRIPTION "V1.03, collated and optimized MIB interface for batch performance statistics to form baseline."
REVISION "200607310000Z"
DESCRIPTION "V1.02, added leaf according to requirement of the NMS."
REVISION "200605310000Z"
DESCRIPTION "V1.01, baseline the version."
REVISION "200604270000Z"
DESCRIPTION "V1.00, completed the draft."
::= { huaweiUtility 103 }
hwBulkFile OBJECT IDENTIFIER ::= { hwBulkStatistics 1 }
hwBulkFileMgmt OBJECT IDENTIFIER ::= { hwBulkFile 1 }
hwBulkFileCopyMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Maximum number of the bulk files that are allowed to back up.
When the bulk file is created successfully,
the NMS will get the bulk file from the devices periodically.
It is required that the host device back up the bulk file in periods.
Because the system resources are limited, this object defines the maximum of backup files.
When it hits, the earliest backup file will be overwritten by new ones.
If the hwBulkFileTable is not empty, modification to this object value is not allowed.
"
::= { hwBulkFileMgmt 1 }
hwBulkFileTableNextIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Next available index for table hwBulkFileTable.
If no available index, the value will be filled with '-1'.
"
::= { hwBulkFileMgmt 2 }
hwBulkFileCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of the bulk file currently.
"
::= { hwBulkFileMgmt 3 }
-- File management table
hwBulkFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBulkFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Bulk file management table, providing creat/modify/delete operations.
To create a bulk file, you need create a related record in this table,
and add object nodes in hwBulkObjectTable.If you delete a record,
the object records in hwBulkObjectTable and all backup files will be also deleted.
The index of this table is hwBulkFileIndex.
"
::= { hwBulkFileMgmt 4 }
hwBulkFileEntry OBJECT-TYPE
SYNTAX HwBulkFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Bulk file management table, providing creat/modify/delete operations.
To create a bulk file, you need create a related record in this table,
and add object nodes in hwBulkObjectTable.If you delete a record,
the object records in hwBulkObjectTable and all backup files will be also deleted.
The index of this entry is hwBulkFileIndex.
"
INDEX { hwBulkFileIndex }
::= { hwBulkFileTable 1 }
HwBulkFileEntry ::= SEQUENCE
{
hwBulkFileIndex Integer32,
hwBulkFileName OCTET STRING,
hwBulkFileStorage INTEGER,
hwBulkFileFormat INTEGER,
hwBulkFileCollectInterval INTEGER,
hwBulkFileNmsGetInterval INTEGER,
hwBulkFileStatus INTEGER,
hwBulkFileCurrDirectoryPath OCTET STRING,
hwBulkFileObjectMainType Integer32,
hwBulkFileObjectSubType Integer32,
hwBulkFileRowStatus RowStatus,
hwBulkFileColNumMode INTEGER,
hwBulkFileCollectStartTime OCTET STRING,
hwBulkFileCopyNum Integer32,
hwBulkObjectCapItemList BITS
}
hwBulkFileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index of bulk file,a unique identifier for a bulk file.
"
::= { hwBulkFileEntry 1 }
hwBulkFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Bulk file name.
If you specify a path in the file name, this file is invalid.
"
::= { hwBulkFileEntry 2 }
hwBulkFileStorage OBJECT-TYPE
SYNTAX INTEGER
{
ephemeral(1),
volatile(2),
permanent(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Storage mode of the statistics file.
Options:
1.ephemeral(1) -data file of small volume. It applies to be read once.
2.volatile(2) -stored in memory. Easy to lose.
3.permanent(3) -stored in hard disk. Keep well.
"
DEFVAL { volatile }
::= { hwBulkFileEntry 3 }
hwBulkFileFormat OBJECT-TYPE
SYNTAX INTEGER
{
standardBER(1),
bulkASCIIWithDeflate(2),
bulkASCIIWithZipFile(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Bulk file formats.
Options:
1.standardBER(1)-standard SNMP ASN.1 BER.
2.bulkASCIIWithDeflate(2) -readable ASCII with deflate format.
3.bulkASCIIWithZipFile(3) -readable ASCII with zip format.
"
DEFVAL {bulkASCIIWithDeflate}
::= { hwBulkFileEntry 4 }
hwBulkFileCollectInterval OBJECT-TYPE
SYNTAX INTEGER
{
fifteenMinutes(1),
thirtyMinutes(2),
oneHour(3),
sixHour(4),
oneDay(5),
twoHour(6),
twelveHour(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Data collection interval.
Options:
1.fifteenMinutes(1) -Every 15 minutes.
2.thirtyMinutes(2) -Every 30 minutes.
3.oneHour(3) -Every 1 hour.
4.sixHour(4) -Every 6 hours.
5.oneDay(5) -Every 1 day.
6.twoHour(6) -Every 2 hours.
7.twelveHour(7) -Every 12 hours.
"
DEFVAL {fifteenMinutes}
::= { hwBulkFileEntry 5 }
hwBulkFileNmsGetInterval OBJECT-TYPE
SYNTAX INTEGER
{
hour(1),
thirtyMinutes(2),
fifteenMinutes(3),
sixHour(4),
oneDay(5),
twoHour(6),
twelveHour(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
File report interval. The interval thirtyMinutes is not supported.
The file report interval cannot be shorter than the data collection interval.
Options:
1.hour(1) -The host generates a statistics file every hour.
2.thirtyMinutes(2) -The host generates a statistics file every 30 minutes.
3.fifteenMinutes(3) -The host generates a statistics file every 15 minutes.
4.sixHour(4) -The host generates a statistics file every six hour.
5.oneDay(5) -The host generates a statistics file every day.
6.twoHour(6) -The host generates a statistics file every two hour.
7.twelveHour(7) -The host generates a statistics file every twelve hour.
Data collection interval and file storage interval can be only one of the following combinations:
Data collection interval file storage interval
15 minutes 15 minutes or 1 hour
6 hour 6 hours
1 day 1 day
This object takes effect when the centralized bulk feature is enabled,
and does not take effect when the distributed bulk feature is enabled.
"
DEFVAL {hour}
::= { hwBulkFileEntry 6 }
hwBulkFileStatus OBJECT-TYPE
SYNTAX INTEGER
{
ready(1),
create(2),
running(3),
nospace(4),
noMem(5),
writeErr(6),
stopped(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Bulk file status.
Options:
1.ready(1) -indicates that the statistics file is only created,
leaving the actual statistics collection to be started. This value cannot be set.
2.create(2) -indicates the starting of the file. If succeeds, the status changes to running.
If fails, an error code is returned.
3.running(3) -indicates that the statistics file is already started successfully
and in the running state currently. This value cannot be set.
4.nospace(4) -indicates that creating or writing the file failed.
The cause is no free space in hard disk. This value cannot be set.
5.noMem(5) -indicates that creating or writing the file failed. The cause is no free memory.
This value cannot be set.
6.writeErr(6)-indicates an Unknown error. The file cannot be written.
7.stopped(7) -indicates that the task is suspended.
If this value is set when in the running status, then writing file is stopped.
Meanwhile, the system generates a file based on the collected data.
"
::= { hwBulkFileEntry 7 }
hwBulkFileCurrDirectoryPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The latest index of the statistics file.
"
::= { hwBulkFileEntry 8 }
hwBulkFileObjectMainType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Identify main-type of object. The device will collect statistics of all the ports according to
to hwBulkFileObjectMainType and hwBulkFileObjectSubType if these two objects are not null.
The values of hwBulkFileObjectMainType and hwBulkFileObjectSubType need to match as follows:
--------------------------------------
ulMainType ulSubType Note
---------------------------------------
1 101 Device
3 113 V5 Interface user frame
4 100 Board
4 101 Memory
6 105 ADSL port(only support ADSL2+)
6 108 E1 port
6 109 Ethernet port
6 111 interboard-port
6 112 backboard port
6 113 V5 user
6 119 ATM port
6 126 SHDSL port
6 141 DS3 port
6 160 G.fast port
6 161 G.fast Xlin-data
6 162 G.fast Segment
6 173 Ethernet port
6 175 VDSL2 port
6 180 VDSL2 Xlin-data
6 1080 E1 port
6 108000 E1 port
7 100 VDSL2 Segment
112 0 Vcl flux
112 1 Vpl flux
112 101 C VLAN
112 102 XPON Service-port
114 1 V5 interface
114 2 2M link
114 3 Logic C channel
120 0 VLAN
127 1 IMA group
127 2 IMA link
145 0 MG
153 0 L2UA link
153 1 L2UA link
182 1 XPON ONT Optical Module Dynamic Info
182 2 XPON UNI Optical Module Dynamic Info
182 3 EPON ONT Optical Module Dynamic Info
182 4 EPON UNI Optical Module Dynamic Info
191 1 GPON UNI PORT Statistics
191 2 GPON ONU Statistics
191 7 GPON ONU Wifi Statistics
191 8 GPON ONU Wifi STA Info
191 9 GPON ONU Wifi Neighbor AP info
191 15 XPON ONT ETH PORT Statistics
192 1 EPON UNI PORT Statistics
192 2 EPON ONU Statistics
192 7 EPON ONU Wifi Statistics
192 8 EPON ONU Wifi STA Info
192 9 EPON ONU Wifi Neighbor AP Info
192 11 EPON ONT ETH PORT Statistics
197 7 Cable Modem
197 8 Cable Channel
200 0 Y1731 PM
201 0 Port Queue Statistics
---------------------------------------
"
::= { hwBulkFileEntry 9 }
hwBulkFileObjectSubType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Identify sub-type of object. The device will collect statistics on all ports according
to hwBulkFileObjectMainType and hwBulkFileObjectSubType if these two leaves are not null.
The values of hwBulkFileObjectMainType and hwBulkFileObjectSubType need to match as follows:
--------------------------------------
ulMainType ulSubType Note
---------------------------------------
1 101 Device
3 113 V5 Interface user frame
4 100 Board
4 101 Memory
6 105 ADSL port(only support ADSL2+)
6 108 E1 port
6 109 Ethernet port
6 111 interboard-port
6 112 backboard port
6 113 V5 user
6 119 ATM port
6 126 SHDSL port
6 141 DS3 port
6 160 G.fast port
6 161 G.fast Xlin-data
6 162 G.fast Segment
6 173 Ethernet port
6 175 VDSL2 port
6 180 VDSL2 Xlin-data
6 1080 E1 port
6 108000 E1 port
7 100 VDSL2 Segment
112 0 Vcl flux
112 1 Vpl flux
112 101 C VLAN
112 102 XPON Service-port
114 1 V5 interface
114 2 2M link
114 3 Logic C channel
120 0 VLAN
127 1 IMA group
127 2 IMA link
145 0 MG
153 0 L2UA link
153 1 L2UA link
182 1 XPON ONT Optical Module Dynamic Info
182 2 XPON UNI Optical Module Dynamic Info
182 3 EPON ONT Optical Module Dynamic Info
182 4 EPON UNI Optical Module Dynamic Info
191 1 GPON UNI PORT Statistics
191 2 GPON ONU Statistics
191 7 GPON ONU Wifi Statistics
191 8 GPON ONU Wifi STA Info
191 9 GPON ONU Wifi Neighbor AP info
191 15 XPON ONT ETH PORT Statistics
192 1 EPON UNI PORT Statistics
192 2 EPON ONU Statistics
192 7 EPON ONU Wifi Statistics
192 8 EPON ONU Wifi STA Info
192 9 EPON ONU Wifi Neighbor AP Info
192 11 EPON ONT ETH PORT Statistics
197 7 Cable Modem
197 8 Cable Channel
200 0 Y1731 PM
201 0 Port Queue Statistics
---------------------------------------
"
::= { hwBulkFileEntry 10 }
hwBulkFileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Row operation object. When the centralized bulk feature is enabled,
the file in the running state cannot be deleted, whereas when the
distributed bulk feature is enabled, the file in any state can be deleted.
"
::= { hwBulkFileEntry 11 }
hwBulkFileColNumMode OBJECT-TYPE
SYNTAX INTEGER
{
reportLastSection(1),
notReportLastSection(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Setting whether to report the statistics collected in the previous interval.
After the statistics file is created, the identifier cannot be changed.
Options:
1.reportLastSection(1) -indicates that the statistics collected in the previous interval
is contained in the statistics file of the current interval.
2.notReportLastSection(2)-indicates that the statistics data of the last interval
is not contained in the statistics file of the current interval.
This object takes effect only when the centralized bulk feature is enabled,
and does not take effect when the distributed bulk feature is enabled.
"
DEFVAL {reportLastSection}
::= { hwBulkFileEntry 12 }
hwBulkFileCollectStartTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..5))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Setting the start time of the data collection with intervals of six hours or one day.
The default start time is 00:00, and can only be an integer multiple of 15 minutes.
The start time of the data collection with the interval of 15 minutes can be set,
but it does not take effect actually.
"
DEFVAL { "0:0" }
::= { hwBulkFileEntry 13 }
hwBulkFileCopyNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of saved files during this task, read-only.
"
::= { hwBulkFileEntry 14 }
hwBulkObjectCapItemList OBJECT-TYPE
SYNTAX BITS
{
pmpDslOprMode(0),
pmpAturVdrId(1),
pmpDslPrfName(2),
pmpCrcEcNerUs(3),
pmpCrcEcFerDs(4),
pmpFecsNerUs(5),
pmpFecsFerDs(6),
pmpFecEvtNerUs(7),
pmpFecEvtFerDs(8),
pmpEsNerUs(9),
pmpEsFerDs(10),
pmpSesNerUs(11),
pmpSesFerDs(12),
pmpUasNerUs(13),
pmpUasNerDs(14),
pmpLossNerUs(15),
pmpLossFerDs(16),
pmpLofsNerUs(17),
pmpLofsFerDs(18),
pmpLolsFerUs(19),
pmpLopsFerDs(20),
pmpSucInit(21),
pmpFailFullInit(22),
pmpLineAttnUs(23),
pmpLineAttnDs(24),
pmpSnrUs(25),
pmpSnrDs(26),
pmpLineRateUs(27),
pmpLineRateDs(28),
pmpMaxAtblDrUs(29),
pmpMaxAtblDrDs(30),
pmpUpTime(31),
pmpTrfcUs(32),
pmpTrfcDs(33),
pmpPwrStt(34),
pmpNtePwrStt(35),
pmpAatpUs(36),
pmpAatpDs(37),
pmpRUs(38),
pmpRDs(39),
pmpSUs(40),
pmpSDs(41),
pmpDUs(42),
pmpDDs(43),
pmpNUs(44),
pmpNDs(45),
pmpActInpUs(46),
pmpActinpDs(47),
pmpInmInpeqUs(48),
pmpInmInpeqDs(49),
pmpInmIatUs(50),
pmpInmIatDs(51),
pmpInmmeUs(52),
pmpInmmeDs(53),
pmpRtxusedUs(54),
pmpRtxusedDs(55),
pmpResynRatio(56),
pmpPcbDs(57),
pmpModuMode(58),
pmpPboDs(59),
pmpPboUs(60),
pmpElem1Support(61),
pmpIntervalValid(62),
pmpFecUnevtNerUs(63),
pmpGecUnevtNarDs(64),
pmpEnBlkNerUs(65),
pmpEnBlkFarDs(66),
pmpRtxCwNerUs(67),
pmpRtxCwFarDs(68),
pmpRtxCcwNerUs(69),
pmpRtxCcwFarDs(70),
pmpRtxUnccwNerus(71),
pmpRtxUnccwFards(72),
pmpXturVdsNum(73),
pmpXturVerNum(74),
pmpActDelayUs(75),
pmpActDelayDs(76),
pmpAdslExtprfName(77),
pmpBandPlan(78),
pmpActPsdDs(79),
pmpActPsdUs(80),
pmpXturSvdNum(81),
pmpPortState(82),
pmpCpeType(83),
pmpRtxleftrDs(84),
pmpRtxleftrUs(85),
pmpRtxefbDs(86),
pmpRtxefbUs(87),
pmpRtxmineftrDs(88),
pmpRtxmineftruUs(89),
pmpRtxactuaeftrDs(90),
pmpRtxactuaeftrUs(91),
pmpSigAttnUs(92),
pmpSigAttnDs(93),
pmpLineAttnPbUs(94),
pmpLineAttnPbDs(95),
pmpSignalAttnPbUs(96),
pmpSignalAttnPbDs(97),
pmpSnrMarginPbUs(98),
pmpSnrmarginPbDs(99),
pmpUsRateProf(100),
pmpDsRateProf(101),
pmpInpDelayProf(102),
pmpLineSpectrumProf(103),
pmpUpboProf(104),
pmpDpboprof(105),
pmpRfiProf(106),
pmpNoiseMarginProf(107),
pmpVirtualNoiseProf(108),
pmpInmProf(109),
pmpSosProf(110),
pmpCpeChip(111),
pmpMonitoredTime(112),
pmpVectoringOprMode(113),
pmpSraNe(114),
pmpSraFe(115),
pmpFraNe(116),
pmpFraFe(117),
pmpLprNe(118),
pmpLprFe(119),
pmpFastInit(120),
pmpFailedFastInit(121),
pmpLosNe(122),
pmpLosFe(123),
pmpLandeftrsNe(124),
pmpLandeftrsFe(125),
pmpAndeftrdsNe(126),
pmpAndeftrdsFe(127),
pmpMinandeftrNe(128),
pmpMinandeftrFe(129),
pmpMaxandeftrNe(130),
pmpMaxandeftrFe(131),
pmpSumandeftrNe(132),
pmpSumandeftrFe(133),
pmpAturVerNumHex(134),
pmpSatnUs(138),
pmpSatnDs(139),
pmpSnrPtUs(201),
pmpSnrPtDs(202),
pmpBitAlUs(203),
pmpBitAlDs(204),
pmpHlogUs(205),
pmpHlogDs(206),
pmpQlnUs(207),
pmpQlnDs(208),
pmpGrpsizeUs(209),
pmpGrpsizeDs(210),
pmpTxpsdUs(211),
pmpTxpsdDs(212),
pmpQlnVectorUs(213),
pmpQlnVectorDs(214),
pmpGainAlUs(215),
pmpGainAlDs(216),
pmpUPackets(250),
pmpDPackets(251),
pmpUBytes(252),
pmpDBytes(253),
pmpUCarDPackets(254),
pmpDCarDPackets(255),
pmpUODPackets(256),
pmpDODPackets(257),
pmpUCvlanPackets(258),
pmpDCvlanPackets(259),
pmpXlinData(261),
pmpXponServiceVlan(270),
pmpXponOnuId(271),
pmpTranOcts(300),
pmpRecvOcts(301),
pmpTranEthPortPackets(302),
pmpRecvEthPortPackets(303),
pmpRecvDiscardEthPortPackets(304),
pmpTranDiscardEthPortPackets(305),
pmpTranGreenSendEthPortOcts(306),
pmpTranGreenSendethPortNumber(307),
pmpTranGreensendDiscardEthNumber(308),
pmpTranYellowSendEthPortOcts(309),
pmpTranYellowSendEthPortNumber(310),
pmpTranYellowSendDiscardEthNumber(311),
pmpEthTranUnicastPackets(312),
pmpEthRecvUnicastPackets(313),
pmpEthTranMulticastPackets(314),
pmpEthrecvMulticastPackets(315),
pmpEthtranBoardcastPackets(316),
pmpEthrecvBoardcastPackets(317),
pmpEthTranPausePackets(318),
pmpEthAlignmentErrorPackets(319),
pmpEthTranCrcErrorPackets(320),
pmpEthRecvCrcErrorPackets(321),
pmpEthCollisionPackets(322),
pmpEthTranOversizedPackets(323),
pmpEthRecvOversizedPackets(324),
pmpEthSingleCollisionPackets(325),
pmpEthMultiCollisionPackets(326),
pmpEthDiscardUndersizedPackets(327),
pmpEthTranUndersizedPackets(328),
pmpEthRecvUndersizedPackets(329),
pmpEthTranFragments(330),
pmpEthRecvFragments(331),
pmpEthTranJabbers(332),
pmpEthRecvJabbers(333),
pmpEthTran64BytePackets(334),
pmpEthRecv64BytePackets(335),
pmpEthTran65127BytePackets(336),
pmpEthRecv65127BytePackets(337),
pmpEthTran128255BytePackets(338),
pmpEthRecv128255BytePackets(339),
pmpEthTran256511BytePackets(340),
pmpEthRecv256511BytePackets(341),
pmpEthTran5121023BytePackets(342),
pmpEthRecv5121023BytePackets(343),
pmpEthTran10241518BytePackets(344),
pmpEthRecv10241518BytePackets(345),
pmpEthTranErrorPackets(346),
pmpEthRecvErrorPackets(347),
pmpEthIntervalValid(348),
pmpEthTranMaxRate(349),
pmpEthRecvMaxRate(350),
pmpEthTranMaxBandwidthUsage(351),
pmpEthRecvMaxBandwidthUsage(352),
pmpEthTranMaxRateTime(353),
pmpEthRecvMaxRateTime(354),
pmpGponUniUsRate(360),
pmpGponUniDsRate(361),
pmpGponUniErrPktRatio(362),
pmpGponUniOpticsTemp(363),
pmpXponUniOpticsBiasCurr(364),
pmpXponUniOpticsVolt(365),
pmpXponUniOpticsTxPower(366),
pmpGponUniTranOcts(367),
pmpGponUniRecvOcts(368),
pmpGponUniTranPackets(369),
pmpGponUniRecvPackets(370),
pmpGponUniDiscardPackets(371),
pmpGponUniTxDiscardPackets(372),
pmpGponUniRecvErrorPackets(373),
pmpEponUniUsRate(376),
pmpEponUniDsRate(377),
pmpEponUniErrPktRatio(378),
pmpEponUniOpticsTemp(379),
pmpEponUniOpticsBiasCurr(380),
pmpEponUniOpticsVolt(381),
pmpEponUniOpticsTxPower(382),
pmpEponUniTxDiscardPackets(383),
pmpEponUniRxDiscardPackets(384),
pmpEponUniRecvOcts(385),
pmpEponUniTranOcts(386),
pmpEponUniRecvErrorPackets(387),
pmpEponUniTranPackets(388),
pmpEponUniRecvPackets(389),
pmpGponNniUsOcts(390),
pmpGponNniDsOcts(391),
pmpGponNniUsRate(392),
pmpGponNniDsRate(393),
pmpXponNniOpticsTemp(394),
pmpXponNniOpticsBiasCurr(395),
pmpXponNniOpticsVolt(396),
pmpXponNniOpticsTxPower(397),
pmpXponNniOpticsRxPower(398),
pmpXponOltNniopticsRxPower(399),
pmpGponNniLofi(400),
pmpGponNniUpErrDelimiter(401),
pmpGponNniUpErrBip(402),
pmpGponNniDownerrBip(403),
pmpGponNniupFecCorrectBlock(404),
pmpGponNniupFecUncorrectBlock(405),
pmpGponNniUpHec(406),
pmpGponNniOfflineTimes(407),
pmpEponNniUsRate(408),
pmpEponNniDsRate(409),
pmpEponNniOpticsTemp(410),
pmpEponNniOpticsBiasCurr(411),
pmpEponNniOpticsVolt(412),
pmpEponNniOpticsTxPower(413),
pmpEponNniOpticsRxPower(414),
pmpEponOltNniOpticsRxPower(415),
pmpEponNniUsOcts(416),
pmpEponNniDsOcts(417),
pmpEponNniofflinetimes(418),
pmpXponOnuEthPortUsRate(424),
pmpXponOnuEthPortDsRate(425),
pmpXponOnuEthPortRxTotal(426),
pmpXponOnuEthPortRxUnic(427),
pmpXponOnuEthPortRxBrdc(428),
pmpXponOnuEthPortRxMltc(429),
pmpXponOnuEthPortTxTotal(430),
pmpXponOnuEthPortTxUnic(431),
pmpXponOnuEthPortTxBrdc(432),
pmpXponOnuEthPortTxMltc(433),
pmpXponOnuEthPortRxOcts(434),
pmpXponOnuEthPortTxOcts(435),
pmpXponOnuethPortRxErrorPackets(436),
pmpEponOnuEthPortUsRate(440),
pmpEponOnuEthPortDsRate(441),
pmpEponOnuEthPortRecvTotal(442),
pmpEponOnuEthPortRxUnic(443),
pmpEponOnuEthPortRxBrdc(444),
pmpEponOnuEthPortRxMltc(445),
pmpEponOnuEthPortTxTotal(446),
pmpEponOnuEthPortTxUnic(447),
pmpEponOnuEthPortTxBrdc(448),
pmpEponOnuEthPortTxMltc(449),
pmpEponOnuEthPortRxOcts(450),
pmpEponOnuEthPortTxOcts(451),
pmpEponOnuEthPortRxErrorPackets(452),
pmpBackboardPortBandwith(500),
pmpRecvSmallMainboardOcts(501),
pmpTranSmallMainboardOcts(502),
pmpRecvDiscardSmallMainboardPackets(503),
pmpTranDiscardSmallMainboardPackets(504),
pmpRecvBigMainboardOcts(505),
pmpTranBigMainboardOcts(506),
pmpRecvDiscardBigMainboardPackets(507),
pmpTranDiscardBigMainboardPackets(508),
pmpInterboardportBandwith(520),
pmpInterboardportRecvOcts(521),
pmpInterboardportTranOcts(522),
pmpInterboardportRecvDiscardpackets(523),
pmpInterboardportTranDiscardpackets(524),
boardCpuOccupation(600),
boardTemperature(601),
boardDspOccupation(602),
pmpPortDesc(603),
pmpLineCardName(604),
pmpLineCardHardwareVersion(605),
boardMgifFailedNum(650),
pmpGponNniRecvErrorPackets(700),
pmpGponNniTranPackets(701),
pmpGponNniRecvPackets(702),
pmpGponNniDnFecCorrectCount(703),
pmpGponNniDnFecUnCorrectCount(704),
pmpEponNniRecvErrorPackets(730),
pmpEponNniTranPackets(731),
pmpEponNniRecvPackets(732),
singleEndedFramelossratioNearMax(750),
singleEndedFramelossratioNearMin(751),
singleEndedFramelossratioNearAverage(752),
singleEndedFramelossratioFarMax(753),
singleEndedFramelossratioFarMin(754),
singleEndedFramelossratioFarAverage(755),
twoWayDelayMax(756),
twoWayDelayMin(757),
twoWayDelayAverage(758),
twoWayJitterMax(759),
twoWayJitterMin(760),
twoWayJitterAverage(761),
oneWayDelayFarMax(762),
oneWayDelayFarMin(763),
oneWayDelayFarAverage(764),
oneWayJitterFarMax(765),
oneWayJitterFarMin(766),
oneWayJitterFarAverage(767),
oneWayDelayNearMax(768),
oneWayDelayNearMin(769),
oneWayDelayNearAverage(770),
oneWayJitterNearMax(771),
oneWayJitterNearMin(772),
oneWayJitterNearAverage(773),
pmpEponUniOptics10gTxPower(780),
pmpEponUniOptics10gBiasCurr(781),
pmpEponNniPeerOpticsTxPower(800),
pmpEponUni1gChannelUsRate(851),
pmpEponUni1gChannelErrPktRatio(852),
pmpEponUni1gChannelUsBytes(853),
pmpEponUni1gChannelDsBytes(854),
pmpEponUni1gChannelDsRate(855),
pmpEponUni1gChannelUsPackets(856),
pmpEponUni1gChannelDsPackets(857),
pmpEponUni1gChannelUsErrorPackets(858),
pmpEponUni1gChannelUsDiscardPackets(859),
pmpEponUni1gChannelDsDiscardPackets(860),
pmpEponUni10gChannelUsrate(861),
pmpEponUni10gChannelErrPktRatio(862),
pmpEponUni10gChannelUsBytes(863),
pmpEponUni10gChannelDsBytes(864),
pmpEponUni10gChannelDsRate(865),
pmpEponUni10gChannelUsPackets(866),
pmpEponUni10gChannelDsPackets(867),
pmpEponUni10gChannelUsErrorPackets(868),
pmpEponUni10gChannelUsDiscardPackets(869),
pmpEponUni10gChannelDsDiscardPackets(870),
pmpXponOnuWifiTxTotalPackets(871),
pmpXponOnuWifiTxErrPackets(872),
pmpXponOnuWifiTxDiscardPackets(873),
pmpXponOnuWifiRxTotalPackets(874),
pmpXponOnuWifiRxErrPackets(875),
pmpXponOnuWifiRxDiscardPackets(876),
pmpXponOnuWifiTransQualityLevel(877),
pmpXponOnuWifiDsRate(878),
pmpXponOnuWifiUsRate(879),
pmpXponOnuWifiRSSI(880),
pmpXponOnuWifiSNR(881),
pmpXponOnuWifiSignalQualityLevel(882),
pmpXponOnuWifiIneighborAP(883),
pmpXponOnuWifiAPFactor(884),
pmpEponUni2gChannelUsRate(885),
pmpEponUni2gChannelUsErrorPacketsRatio(886),
pmpEponUni2gChannelUsDiscardBytes(887),
pmpEponUni2gChannelUsDiscardPackets(888),
pmpEponUni2gChannelUsErrorPackets(889),
pmpCmStatus(950),
pmpCmUsWidth(951),
pmpCmUsFrequency(952),
pmpCmUsCmtsEqd(953),
pmpCmUsActEqd(954),
pmpCmUsSnr(955),
pmpCmUsYxPower(956),
pmpCmUsGoodcode(957),
pmpCmUsCorrected(958),
pmpCmUsUncorrected(959),
pmpCmUsCcer(960),
pmpCmUsUcer(961),
pmpCmDsFrequency(962),
pmpCmDsSnr(963),
pmpCmDsRxPower(964),
pmpCmDsCcer(965),
pmpCmDsUcer(966),
pmpCmDsGoodcode(967),
pmpCmDsCorrected(968),
pmpCmDsUncorrected(969),
pmpMaxDsSNR(970),
pmpMinDsSNR(971),
pmpPrimaryDs(972),
pmpPrimaryUs(973),
pmpRxByte(974),
pmpTxByte(975),
pmpSuccessReg(976),
pmpFailReg(977),
pmpRepeatReg(978),
pmpStationMaintenance(979),
pmpStationMaintenanceMiss(980),
pmpStationMaintainConMiss(981),
pmpPowerAdjust(982),
pmpSeverelyPowerAdjust(983),
pmpUnstableConnection(984),
pmpMaxUsSNR(985),
pmpMinUsSNR(986),
pmpCmDocsisVer(987),
pmpCmUsIucId(988),
pmpCmDsProfileId(989),
pmpUsIucQam(990),
pmpDsProfileQam(991),
pmpUsIucCapa(992),
pmpDsProfileCapa(993),
pmpCmD20Num(994),
pmpCmD30Num(995),
pmpCmD31Num(996),
pmpD31MaxSpeed(997),
pmpCmIpv4Addr(998),
pmpQueueStatsDroppedYellowPackets(1000),
pmpQueueStatsDroppedGreenPackets(1001),
pmpQueueStatsDroppedUnRecognizedColorPackets(1002),
pmpQueueStatsPassedPackets(1003),
pmpQueueStatsPassedBytes(1004),
pmpQueueStatsIntervalValid(1005),
pmpQueueStatsPassedGreenBytes(1006),
pmpQueueStatsPassedGreenNumber(1007),
pmpQueueStatsPassedYellowBytes(1008),
pmpQueueStatsPassedYellowNumber(1009),
pmpCableChlUsRecvbyte(1100),
pmpCableChlUsSnr(1101),
pmpCableChlUsGoodFeccode(1102),
pmpCableChlUsCorrectedFeccode(1103),
pmpCableChlUsUncorrectedFeccode(1104),
pmpCableChlUsCorrectedErrcodepercent(1105),
pmpCableChlUsUncorrectedErrcodepercent(1106),
pmpCableChlUsPer(1107),
pmpCableChlUsUtilization(1108),
pmpCableChlUsCmnumTotal(1109),
pmpCableChlUsCmnumOnline(1110),
pmpCableChlUsCmnumOffline(1111),
pmpCableChlUsCmnumInit(1112),
pmpCableChlUsCmnumReject(1113),
pmpCableChlUsReregtimes(1114),
pmpCableChlDsSendbyte(1115),
pmpCableChlDsUtilization(1116),
pmpCableChlDsCmnumTotal(1117),
pmpCableChlDsCmnumOnline(1118),
pmpCableChlDsCmnumOffline(1119),
pmpCableChlDsCmnumInit(1120),
pmpCableChlDsCmnumReject(1121),
pmpXponOnuWifiTransmissionCurrChannel(1122),
pmpXponOnuWifiTransmissionBandwidth(1123),
pmpXponOnuWifiTransmissionNoise(1124),
pmpXponOnuWifiTransmissionGlitch(1125),
pmpXponOnuWifiTransmissionACSScore(1126),
pmpXponOnuWifiStaInfoTxPhyRate(1127),
pmpXponOnuWifiStaInfoRxPhyRate(1128),
pmpGponUni1gChannelUsRate(1129),
pmpGponUni1gChannelDsRate(1130),
pmpGponUni1gChannelTranOcts(1131),
pmpGponUni1gChannelRecvOcts(1132),
pmpGponUni1gChannelTranPacket(1133),
pmpGponUni1gChannelRecvPacket(1134),
pmpGponUni1gChannelRxDiscardPackets(1135),
pmpGponUni1gChannelTxDiscardPackets(1136),
pmpGponUni10gChannelUsRate(1137),
pmpGponUni10gChannelDsRate(1138),
pmpGponUni10gChannelTranOcts(1139),
pmpGponUni10gChannelRecvOcts(1140),
pmpGponUni10gChannelTranPacket(1141),
pmpGponUni10gChannelRecvPacket(1142),
pmpGponUni10gChannelRxDiscardPackets(1143),
pmpGponUni10gChannelTxDiscardPackets(1144),
pmpGponUniSendGreenBytes(1145),
pmpGponUniSendGreenPackets(1146),
pmpGponUniTxDiscardGreenPackets(1147),
pmpGponUniSendYellowBytes(1148),
pmpGponUniSendYellowPackets(1149),
pmpGponUniTxYellowGreenPackets(1150)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
List of the statistical index. Through this object,
the statistical index can be configured in batches in the format of bit-domain string.
Each file supports up to 256 statistical indexes.
The statistical index hwBulkObjectCapItemList is of the bit type.
It can be configured as follows: to configure the index n, set the nth in the bit string to 1,
that is,......000100......For example, to configure the index 1,
set the first character of the string to 1,
and issue 0100 0000, namely, # 0x40 (note that the value of the bit type starts from 0).
For example, to configure the index 8, set the eighth character of the string to 1,
and issue 0000 0000 1000 0000, namely, # 0x00 0x80.
If the statistical indexes 1, 2, 3, 201, 202 are supported,
# 0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00. 0x00 0x00. 0x00 0x60 is issued.
This object takes effect only when the distributed bulk feature is enabled.
"
::= { hwBulkFileEntry 15 }
hwBulkSaveFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBulkSaveFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used for querying information about the history
files saved by the statistical object.
The indexes of this table are hwBulkFileIndex and hwBulkSaveFileIndex.
This table does not support operations such as create, modify and delete,
but supports get and walk operations.
"
::= { hwBulkFileMgmt 5 }
hwBulkSaveFileEntry OBJECT-TYPE
SYNTAX HwBulkSaveFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used for querying information about the history
files saved by the statistical object.
The indexes of this entry are hwBulkFileIndex and hwBulkSaveFileIndex.
This table does not support operations such as create, modify and delete,
but supports get and walk operations.
"
INDEX { hwBulkFileIndex,hwBulkSaveFileIndex }
::= { hwBulkSaveFileTable 1 }
HwBulkSaveFileEntry ::= SEQUENCE
{
hwBulkSaveFileIndex Integer32,
hwBulkSaveFileTime OCTET STRING
}
hwBulkSaveFileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Index of bulk file copy. It is a unique identifier for a bulk save file.
"
::= { hwBulkSaveFileEntry 1 }
hwBulkSaveFileTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Time of saving the statistics file.
"
::= { hwBulkSaveFileEntry 2 }
-- End of file management table
hwBulkAndTCARelationship OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Switch of the correlation between the bulk performance statistics and threshold alarm.
Options:
1.on(1) -the switch is on.
2.off(2)-the switch is off.
This object is not supported currently.
"
::= { hwBulkFileMgmt 6 }
hwBulkFileNameRule OBJECT-TYPE
SYNTAX BITS
{
filenameIpaddress(0),
filenameInterval(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the rule for naming a statistic file. If this object is set to
interval, the measurement period is contained in the backup file. If this object is set to
ipaddress, the source IP address of the trap is contained in the backup file. If this object
is not specified, the default value is used and the rule for naming a statistics file in
this version is the same as that in the earlier version."
::= { hwBulkFileMgmt 7 }
hwBulkFileConditionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBulkFileConditionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the statistical condition table, on which users can add, delete,
or modify statistical conditions. Before adding a statistical condition,
use hwBulkFileTable to configure a statistical task. To delete a statistical condition,
use hwBulkFileCollectRowStatus. Before deleting a statistical task, use hwBulkFileConditionTable
to delete corresponding statistical conditions. To modify an existing statistical condition, modify
the value of the hwBulkFileCollectCondition field.Statistical conditions can be issued in hexadecimal notation or using a character string.
The index of this table is hwBulkFileObjectMainType, hwBulkFileObjectSubType and hwBulkFileCollectInterval."
::= { hwBulkFileMgmt 8 }
hwBulkFileConditionEntry OBJECT-TYPE
SYNTAX HwBulkFileConditionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the statistical condition table, on which users can add, delete,
or modify statistical conditions. Before adding a statistical condition,
use hwBulkFileTable to configure a statistical task. To delete a statistical condition,
use hwBulkFileCollectRowStatus. Before deleting a statistical task, use hwBulkFileConditionTable
to delete corresponding statistical conditions. To modify an existing statistical condition, modify
the value of the hwBulkFileCollectCondition field.Statistical conditions can be issued in hexadecimal notation or using a character string.
The index of this entry is hwBulkFileObjectMainType, hwBulkFileObjectSubType and hwBulkFileCollectInterval."
INDEX { hwBulkFileObjectMainType,hwBulkFileObjectSubType,hwBulkFileCollectInterval }
::= { hwBulkFileConditionTable 1 }
HwBulkFileConditionEntry ::= SEQUENCE
{
hwBulkFileCollectCondition OCTET STRING,
hwBulkFileCollectRowStatus RowStatus
}
hwBulkFileCollectCondition OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..200))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Statistical condition.
"
::= { hwBulkFileConditionEntry 1 }
hwBulkFileCollectRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Row status of the statistical condition.
"
::= { hwBulkFileConditionEntry 2 }
-- End of file management table
hwBulkObjectMgmt OBJECT IDENTIFIER ::= { hwBulkFile 2 }
-- OID management table in the bulk file
hwBulkOIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBulkOIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
OID management table in the bulk file. Prerequisite for the operation is that the
bulk file is listed in the hwBulkFileTable and the file state is ready.
The indexes of this table are hwBulkOID and hwBulkFileIndex in hwBulkFileTable.
In the case of the distributed bulk performance statistics, this table is not supported.
"
::= { hwBulkObjectMgmt 1 }
hwBulkOIDEntry OBJECT-TYPE
SYNTAX HwBulkOIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
OID management table in the bulk file. Prerequisite for the operation is that the
bulk file is listed in the hwBulkFileTable and the file state is ready.
The indexes of this entry are hwBulkOID and hwBulkFileIndex in hwBulkFileTable.
In the case of the distributed bulk performance statistics, this table is not supported.
"
INDEX { hwBulkFileIndex,
IMPLIED hwBulkOID }
::= { hwBulkOIDTable 1 }
HwBulkOIDEntry ::= SEQUENCE
{
hwBulkOID OBJECT IDENTIFIER,
hwBulkOIDRowStatus RowStatus
}
hwBulkOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Index in the case of adding the object in the statistics file.
The OID of the object is collected. The OID need not contain the index.
The maximum length of the OID (excluding '.') is 20 digits.
"
::= { hwBulkOIDEntry 1 }
-- This object will be deleted because device need not calculate difference value and the NMS only wants absolute value.
-- hwBulkOIDIsStatistical OBJECT-TYPE
-- SYNTAX INTEGER{ absolute(1), difference(2)}
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "
-- Judge whether the objects of bulk files are statistic or others.
-- absolute(1): The objects are not statistics. The data is absolute value.
-- difference(2): The objects are statistics. The data is difference value.
-- "
-- ::= { hwBulkOIDEntry 2 }
hwBulkOIDRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Row operation object hwBulkOIDRowStatus.
When the creation operation is performed in hwBulkOIDRowStatus, the enumeration value createAndGo (4) is used.
During the creation operation, hwBulkFileIndex and hwBulkObjectIndex must be issued together.
Before the creation operation, make sure that hwBulkFileTable contains a statistical file record.
If a file corresponds to multiple OIDs, the program checks whether the number of OIDs is the same as
the number of indexes. If the number of OIDs is different from the number of indexes, the file
cannot be issued. The user must ensure that the indexes corresponding to the same OID in different
tables are the same. Otherwise, the collected data may be abnormal.
During dynamic creation, the creation configuration takes effect only after the next report period
of the statistical file.
When the deletion operation is performed, the enumeration value destroy (6) is used.
During the deletion operation, the indexes hwBulkFileIndex and hwBulkFileIndexmust must be
issued together. When the statistical task is started, after the IOD is deleted,
it cannot be queried but still exists actually.
The deletion of the OID takes effect after the next report period.
"
::= { hwBulkOIDEntry 2 }
-- Object management table in the bulk file
hwBulkIndexMgmt OBJECT IDENTIFIER ::= { hwBulkFile 3 }
hwBulkObjectIndexCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total number of object indexes.
"
::= { hwBulkIndexMgmt 1 }
hwBulkObjectTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWBulkObjectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Object management table in the bulk file,
providing add/delete operations.
Prerequisite for the operation is that the
bulk file is listed in hwBulkFileTable
and the file state is ready.
The indexes of this table are hwBulkObjectIndex and hwBulkFileIndex in hwBulkFileTable.
The object hwBulkObjectOIDIndex can be used to configure a precise index or a fuzzy index.
When one MIB object has multiple indexes, a '.' is used to separate the indexes.
For example, in a MIB table with the shelf ID/slot ID/port ID as the index,
when you need to collect the information about shelf 0/slot 5/port 2,
configure a precise index, namely, a character string 0.5.2.
When you need to collect the information about all the ports in slot 5 of shelf 0,
configure a fuzzy index, namely, a character string 0.5.all. all is used to represent fuzzy index.
When you need to collect the information about all the ports, use a fuzzy index all.all.all.
In the case of the distributed bulk performance statistics, this table is not supported.
"
::= { hwBulkIndexMgmt 2 }
hwBulkObjectEntry OBJECT-TYPE
SYNTAX HWBulkObjectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Object management table in the bulk file,
providing add/delete operations.
Prerequisite for the operation is that the
bulk file is listed in hwBulkFileTable
and the file state is ready.
The indexes of this entry are hwBulkObjectIndex and hwBulkFileIndex in hwBulkFileTable.
The object hwBulkObjectOIDIndex can be used to configure a precise index or a fuzzy index.
When one MIB object has multiple indexes, a '.' is used to separate the indexes.
For example, in a MIB table with the shelf ID/slot ID/port ID as the index,
when you need to collect the information about shelf 0/slot 5/port 2,
configure a precise index, namely, a character string 0.5.2.
When you need to collect the information about all the ports in slot 5 of shelf 0,
configure a fuzzy index, namely, a character string 0.5.all. all is used to represent fuzzy index.
When you need to collect the information about all the ports, use a fuzzy index all.all.all.
In the case of the distributed bulk performance statistics, this table is not supported.
"
INDEX { hwBulkFileIndex,hwBulkObjectIndex }
::= { hwBulkObjectTable 1 }
HWBulkObjectEntry ::= SEQUENCE
{
hwBulkObjectIndex Integer32,
hwBulkObjectOIDIndex OCTET STRING,
hwBulkObjectLength Integer32,
hwBulkObjectRowStatus RowStatus
}
hwBulkObjectIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Object index in the Bulk file.
A unique identifier for a record,
indicating the sequence of objects.
"
::= { hwBulkObjectEntry 1 }
hwBulkObjectOIDIndex OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (1..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Start index of objects in a task,
for each task there can be many start index.In order
to get a value , a complete OID can be formed by adding the hwBulkOID in
hwBulkOIDTable and the hwBulkObjectOIDIndex from hwBulkObjectTable.
"
::= { hwBulkObjectEntry 2 }
hwBulkObjectLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"
Number of continuous objects.
The default value is 1, indicating that only this object value will be collected.
"
DEFVAL {1}
::= { hwBulkObjectEntry 3 }
hwBulkObjectRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Row operation object hwBulkObjectRowStatus. The enumeration value destroy (6)
is used for the deletion.During the deletion operation,
the indexes hwBulkFileIndex and hwBulkObjectIndex must be issued together.
When the statistics file is running,
the deletion will take effect in the next report period after the deletion operation is performed.
During the creation operation, hwBulkFileIndex and hwBulkObjectIndex must be issued together.
Before the creation operation, make sure that hwBulkFileTable contains a statistical file.
hwBulkObjectOIDIndex can be to configure a precise index or a fuzzy index. When one MIB object has multiple indexes,
a '.' is used to separate the indexes.
For example, in a MIB table with the shelf ID/slot ID/port ID as the index,
when you need to collect the information about shelf 0/slot 5/port 2, configure a precise index, namely, a character string 0.5.2.
When you need to collect the information about all the ports in slot 5 of shelf 0, configure a fuzzy index, namely,
a character string 0.5.all. all is used to represent fuzzy index.
When you need to collect the information about all the ports, use a fuzzy index all.all.all.
The index with its index type configured to character string type is not supported.
If the configured index is the same as the data that is already configured, the operation fails.
"
::= { hwBulkObjectEntry 4 }
-- Object CapItem table in the bulk file
hwBulkObjectCapItemMgnt OBJECT IDENTIFIER ::= { hwBulkFile 5 }
-- 1.3.6.1.4.1.2011.6.103.1.5.1
hwBulkObjectCapItemTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBulkObjectCapItemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to add or delete the statistical
index in the configuration of the statistics file.
The indexes of this table are hwBulkObjectCapItem and hwBulkFileIndex in hwBulkFileTable.
This table does not support the modify operation.
In the case of the distributed bulk performance statistics, this table cannot be operated.
"
::= { hwBulkObjectCapItemMgnt 1 }
-- 1.3.6.1.4.1.2011.6.103.1.5.1.1
hwBulkObjectCapItemEntry OBJECT-TYPE
SYNTAX HwBulkObjectCapItemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to add or delete the statistical
index in the configuration of the statistics file.
The indexes of this entry are hwBulkObjectCapItem and hwBulkFileIndex in hwBulkFileTable.
This table does not support the modify operation.
In the case of the distributed bulk performance statistics, this table cannot be operated.
"
INDEX { hwBulkFileIndex, hwBulkObjectCapItem }
::= { hwBulkObjectCapItemTable 1 }
HwBulkObjectCapItemEntry ::= SEQUENCE
{
hwBulkObjectCapItem
Integer32,
hwBulkObjectCapItemRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.103.1.5.1.1.1
hwBulkObjectCapItem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Statistical task index, which is used for setting the performance data items for a statistical task.
"
::= { hwBulkObjectCapItemEntry 1 }
-- 1.3.6.1.4.1.2011.6.103.1.5.1.1.2
hwBulkObjectCapItemRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Row operation object. When the statistics file is running, the statistical
index can be added or deleted. The adding or deletion takes effect after
the next period of the statistics file. Each statistics file can be configured
with up to 256 statistical indexes. If the number of statistical indexes exceeds 256,
you cannot add the statistical index any more.When the statistics file is running,
at least one statistics file needs to be left undeleted. If the number of statistical
indexes is 1, you cannot delete the statistical index any more.
This restriction does not apply to the case of the non-running state of the statistics file.
createAndGo(4)is supplied to create a new instance of a conceptual row.
destroy(6)is supplied to delete the instances associated with an existing conceptual row.
"
::= { hwBulkObjectCapItemEntry 2 }
-- 1.3.6.1.4.1.2011.6.103.1.6
hwBulkTrapVbOids OBJECT IDENTIFIER ::= { hwBulkFile 6 }
-- 1.3.6.1.4.1.2011.6.103.1.6.1
hwTrapAutoBackupFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..129))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The file name of auto-backup bulk file. The format of the file name is 'statistical task name_time_file index_[ipaddress]_[interval]'.
Parameters ipaddress and interval are optional.
If the value of node hwBulkFileFormat is bulkASCIIWithZipFile(3), the file is a .zip file and the file name is
'statistical task name_time_file index_[ipaddress]_[interval].zip'.If the value of node hwBulkFileFormat is not
bulkASCIIWithZipFile(3), the file is not a .zip file.
Statistical task names correspond to the values of parameter hwBulkFileName, and hwBulkFileName contains 1 to 63 characters.
The time format for version2 is DDHHMM and that for version3 is YYYYMMDDHHMMSS. The time indicates the
time when the file is created for version2. The time indicates the start time of data collection for version3.
File indexes correspond to the values of parameter hwBulkSaveFileIndex.
Ipaddress is the source IP address of TRAP.
Parameter interval indicates data collection interval.
File names can be generated automatically before transfer.
The length of the file name cannot be longer than 129 characters.
"
::= { hwBulkTrapVbOids 1 }
-- 1.3.6.1.4.1.2011.6.103.1.7
hwBulkTraps OBJECT IDENTIFIER ::= { hwBulkFile 7 }
-- 1.3.6.1.4.1.2011.6.103.1.7.1
hwBulkAlarmTraps OBJECT IDENTIFIER ::= { hwBulkTraps 1 }
hwBulkAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwBulkAlarmTraps 0 }
-- 1.3.6.1.4.1.2011.6.103.1.7.1.1
hwBulkFileFailAlarmTrap NOTIFICATION-TYPE
OBJECTS
{
hwBulkFileIndex
}
STATUS current
DESCRIPTION
"
This trap message is reported when the statistic file is created unsuccessfully.
"
::= { hwBulkAlarmTrapsPrefix 1 }
-- 1.3.6.1.4.1.2011.6.103.1.7.2
hwBulkCommonTraps OBJECT IDENTIFIER ::= { hwBulkTraps 2 }
hwBulkCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwBulkCommonTraps 0 }
-- 1.3.6.1.4.1.2011.6.103.1.7.2.1
hwBulkBackupStartCommonTrap NOTIFICATION-TYPE
OBJECTS
{
hwBulkFileIndex,
hwBulkSaveFileIndex,
hwBulkSaveFileTime
}
STATUS current
DESCRIPTION
"
When the centralized bulk performance statistic feature is enabled and a statistical task is started,
this trap message is reported after a statistical file is generated.
When the distributed bulk performance statistic feature is enabled, this trap message is reported
after the host incorporates all the board files.
"
::= { hwBulkCommonTrapsPrefix 1 }
-- 1.3.6.1.4.1.2011.6.103.1.7.2.2
hwBulkBackupSuccessCommonTrap NOTIFICATION-TYPE
OBJECTS
{
hwFTPClientIndex,
hwFTPClientFileName,
hwFTPDestFileName,
hwFTPClientState
}
STATUS current
DESCRIPTION
"
A trap message that contains the file backup result is reported after a statistical file is tried to back up on the NMS.
"
::= { hwBulkCommonTrapsPrefix 2 }
-- 1.3.6.1.4.1.2011.6.103.1.7.2.0.3
hwBulkAutobackupSuccessTrap NOTIFICATION-TYPE
OBJECTS
{
hwTrapAutoBackupFileName,
hwBulkFileIndex,
hwBulkFileCopyNum
}
STATUS current
DESCRIPTION
"
This trap message is reported when the statistical file is auto-backed up successfully on the NMS.
"
::= { hwBulkCommonTrapsPrefix 3 }
-- 1.3.6.1.4.1.2011.6.103.1.7.2.0.4
hwBulkAutobackupFailTrap NOTIFICATION-TYPE
OBJECTS
{
hwTrapAutoBackupFileName,
hwBulkFileIndex,
hwBulkFileCopyNum,
hwLoadBackupResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the statistical file is auto-backed up unsuccessfully on the NMS.
"
::= { hwBulkCommonTrapsPrefix 4 }
-- End of object management
hwBulkFTPClient OBJECT IDENTIFIER ::= { hwBulkStatistics 2 }
hwFTPClientMgmt OBJECT IDENTIFIER ::= { hwBulkFTPClient 1 }
-- FTP client management table
hwFTPClientTableNextIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Next available index for table FTPClientTable.
If no available index, the value will be filled with '-1'.
"
::= { hwFTPClientMgmt 1 }
hwFTPClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFTPClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
FTP client management table is used for transferring the statistics file,
and providing add/delete operations. The host servers as client,
while the NMS as server. The index of this table is hwFTPClientIndex.
The operation for this table can be successful only when the bulk
collection of the backup files is successful.
"
::= { hwFTPClientMgmt 2 }
hwFTPClientEntry OBJECT-TYPE
SYNTAX HwFTPClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
FTP client management table is used for transferring the statistics file,
and providing add/delete operations. The host servers as client,
while the NMS as server. The index of this entry is hwFTPClientIndex.
The operation for this table can be successful only when the bulk
collection of the backup files is successful.
"
INDEX { hwFTPClientIndex }
::= { hwFTPClientTable 1 }
HwFTPClientEntry ::= SEQUENCE
{
hwFTPClientIndex Integer32,
hwFTPClientMode INTEGER,
hwFTPClientOper INTEGER,
hwFTPClientFileName OCTET STRING,
hwFTPDestFileName OCTET STRING,
hwFTPClientServerIP IpAddress,
hwFTPClientUserName OCTET STRING,
hwFTPClientPasswd OCTET STRING,
hwFTPClientIfIndex Integer32,
hwFTPClientState INTEGER,
hwFTPClientRowStatus RowStatus,
hwFTPClientServerPort Integer32,
hwFTPClientNum Integer32,
hwFTPClientServerInetAddressType InetAddressType,
hwFTPClientServerInetAddress InetAddress
}
hwFTPClientIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
FTP client index, an unique identifier of a record.
"
::= { hwFTPClientEntry 1 }
hwFTPClientMode OBJECT-TYPE
SYNTAX INTEGER
{
ftp(1),
tftp(2),
sftp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
FTP mode: ftp(1), tftp(2), sftp(3)
Options:
1.ftp(1) -FTP client mode.
2.tftp(2) -TFTP client mode.
3.sftp(3) -SFTP client mode.
If FTP/SFTP is used to transfer files, hwFTPClientUserName and hwFTPClientPasswd need to be bound.
Binding is not required in the case of file transfer through TFTP.
The specified port ID needs to be bound in the case of file transfer through SFTP.
"
::= { hwFTPClientEntry 2 }
hwFTPClientOper OBJECT-TYPE
SYNTAX INTEGER
{
putBinary(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
File transfer format.
Options:
1.putBinary(1) -file transfer format is putBinary.
"
::= { hwFTPClientEntry 3 }
hwFTPClientFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..254))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Source file name. In the case of centralized bulk performance statistics,
the format is 'copy index of the latest file + / + name of the statistics file'.
For example, if the statistical task is ABCD and you need to obtain the second file,
the file name of the hwFTPClientFileName is 2/ABCD.
In the case of distributed bulk performance statistics,
the format is 'version of the file list|index of the file 1(hwBulkSaveFileIndex)/index
of the statistical task 1(hwBulkFileIndex), file index 2/statistical task index 2......'.
For the file list version, only version2 and version3 are currently supported. For example,
when the user needs to obtain the first, second, third,
and fourth files with the statistical task index being 1 and the fifth,
sixth, seventh and eighth files with the statistical task index being 6,
then the value of the issued hwFTPClientFileName is version2|1/1,2/1,3/1,4/1,5/6,6/6,7/6,8/6.
"
::= { hwFTPClientEntry 4 }
hwFTPDestFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..254))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Destination file name, including path. In the centralized bulk performance statistics collection,
the format of the file name is 'path name + | + destination file name'.
For the purpose of saving FTP connections, when the NMS needs to obtain multiple statistics files,
the Mput/Mget mode of FTP can be used. In this case, hwFTPClientFileName
and hwFTPDestFileName must contain multiple file names.
The files are in the format of 'path|file name 1|file name 2|file name 3......'.
Even if the path is null, the format must be '|file name 1|file name 2|file name 3......'.
In hwFTPClientFileName, each file name corresponds to its own index.
In hwFTPDestFileName, however, one path corresponds to multiple file names.
For example, when the path is c:\temp and two files need to be obtained,
hwFTPDestFileName is in the format of 'c:\temp|file name 1|file name 2',
and hwFTPClientFileName is in the format of '|1/ABCD|20/XYZ|30/XXXX'.
In the case of distributed bulk performance statistics,
the format is 'version of the file list|path for uploading the file|device ID|day
and time|file index (hwBulkSaveFileIndex)/index
of the statistical task 1 (hwBulkFileIndex), file index/statistical
task index (hwBulkFileIndex)......'.For the file list version,
Version2 and version3 are currently supported. Path for uploading the file can be provided with
the drive letter, such as c:\temp.
The time format for version 2 is DDHHMM and that for version3 is YYYYMMDDHHMMSS. The time indicates the
time when the file is created for version2. The time indicates the start time of data collection for version3.
The system automatically creates the time for version3. For example, if the user needs to transfer the first,
second, third and fourth files under the device 7340032 and with the statistical index
being 1 at 13:30:20 on the December 2, 2012, and the fifth, sixth, seventh,
and eighth files with the statistical index being 6 to the local directory of bulkfile,
then the value of the issued hwFTPClientFileName is version2| bulkfile|
7340032|021330|1/1,2/1,3/1,4/1,5/6,6/6,7/6,8/6.If the version is version3,then the value of the issued
hwFTPClientFileName is version3| bulkfile|||1/1,2/1,3/1,4/1,5/6,6/6,7/6,8/6.
It should be noted that the file lists (file sequence) in hwFTPClientFileName and
hwFTPDestFileName must be completely the same.
The format of the file name is 'statistical task name (hwBulkFileName)_time_file index[_ipadress][_interval]'.
In TFTP mode, the path cannot be configured.
hwBulkFileName contains 1 to 63 characters.
The path specified for FTP/SFTP contains 1 to 63 characters.
Therefore, the sum of hwBulkFileName and path cannot be longer than 128 characters.
"
::= { hwFTPClientEntry 5 }
hwFTPClientServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
IP address of the FTP server.
"
::= { hwFTPClientEntry 6 }
hwFTPClientUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
User name for FTP/SFTP connection. For the TFTP mode, this field is invalid.
"
DEFVAL { ''H }
::= { hwFTPClientEntry 7 }
hwFTPClientPasswd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Password for FTP/SFTP connection. For the TFTP mode, this field is invalid.
"
DEFVAL { ''H}
::= { hwFTPClientEntry 8 }
hwFTPClientIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
IfIndex in the bulk file in order to get all data with IfIndex as the object index.
If the IfIndex equals to zero, the final file will be filled with all data in current memory.
"
::= { hwFTPClientEntry 9 }
hwFTPClientState OBJECT-TYPE
SYNTAX INTEGER
{
running(1),
success(2),
fileOpenFail(3),
unreachableServerIp(4),
linkFailed(5),
authenticateFailed(6),
fileReadFailed(7),
fileWriteFailed(8),
failed(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FTP operation status:
Options:
1.running(1) -indicates that FTP is running. If you set this object as running,
the FTP will be started.
2.success(2) -indicates that FTP completed successfully.
3.fileOpenFail(3) -indicates that FTP failed. The cause is file open failure.
4.unreachableServerIp(4)-indicates that FTP failed. The cause is that the IP
address of the server is not reachable.
5.linkFailed(5) -indicates that FTP failed. The cause is connecting to server failed.
6.authenticateFailed(6) -indicates that FTP failed.
The cause is authenticating failed.For FTP mode only.
7.fileReadFailed(7) -indicates that FTP failed. The cause is reading file failed.
8.fileWriteFailed(8) -indicates that FTP failed. The cause is writing file failed.
9.failed(9) -indicates that FTP failed,General error.
"
::= { hwFTPClientEntry 10 }
hwFTPClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Row operation object.
createAndGo(4)is supplied to create a new instance of a conceptual row.
destroy(6)is supplied to delete the instances associated with an existing conceptual row.
"
::= { hwFTPClientEntry 11 }
hwFTPClientServerPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
In SFTP port.FTP and TFTP modes, this field is invalid.
"
::= { hwFTPClientEntry 12 }
hwFTPClientNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the maximum number of concurrent FTP/SFTP processes. For the TFTP mode, this field is invalid.
"
::= { hwFTPClientEntry 13 }
hwFTPClientServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
{
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The type of address in hwFTPClientServerInetAddress.
"
::= { hwFTPClientEntry 14 }
hwFTPClientServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The IPv4 or IPv6 address of the BACKUP Server.
"
::= { hwFTPClientEntry 15 }
hwFTPClientMaxNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the maximum number of concurrent FTP/SFTP processes. For the TFTP mode, this field is invalid.
"
::= { hwFTPClientMgmt 3 }
-- File management table
hwTCAObjects OBJECT IDENTIFIER ::= { hwBulkStatistics 3 }
hwTCAMgmt OBJECT IDENTIFIER ::= { hwTCAObjects 1 }
hwDefineTCATable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDefineTCAEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
TCA Management Table. This object is not supported currently.
The indexes of this table are hwDefineFacilityType, hwDefineMontype, hwDefineAid and hwDefineTmper.
"
::= { hwTCAMgmt 1 }
hwDefineTCAEntry OBJECT-TYPE
SYNTAX HwDefineTCAEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
TCA Management Table. This object is not supported currently.
The indexes of this entry are hwDefineFacilityType, hwDefineMontype, hwDefineAid and hwDefineTmper.
"
INDEX { hwDefineFacilityType, hwDefineMontype, hwDefineAid, hwDefineTmper }
::= { hwDefineTCATable 1 }
HwDefineTCAEntry ::= SEQUENCE
{
hwDefineFacilityType
INTEGER,
hwDefineMontype
INTEGER,
hwDefineAid
OCTET STRING,
hwDefineTmper
INTEGER,
hwDefineThlev
OCTET STRING,
hwDefineRowStatus
RowStatus
}
hwDefineFacilityType OBJECT-TYPE
SYNTAX INTEGER
{
system(1),
igmp(2),
dhcp(3),
eapol(4),
vlan(5),
ampeth(100),
xdsladsl(200)
}
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Facility type. This object is not supported currently.
Options:
1.system(1) -indicates facility type is system.
2.igmp(2) -indicates facility type is igmp.
3.dhcp(3) -indicates facility type is dhcp.
4.eapol(4) -indicates facility type is eapol.
5.vlan(5) -indicates facility type is vlan.
6.ampeth(100) -indicates facility type is ampeth.
7.xdsladsl(200)-indicates facility type is xdsladsl.
"
::= { hwDefineTCAEntry 1 }
hwDefineMontype OBJECT-TYPE
SYNTAX INTEGER
{
cpu(1),
memory(2),
rxdd(3),
rxdrq(4),
rxdrl(5),
rxdi(6),
rxuntrust(7),
rxovl(8),
rxovlopt(9),
rxdisp(10),
txdisp(11),
rxgqpm(12),
rxsqpm(13),
rxrpv2m(14),
rxerpv2m(15),
rxrpv3m(16),
rxerpv3m(17),
rxlpm(18),
txgqpm(19),
txsqpm(20),
txrpv2m(21),
txerpv2m(22),
txlpm(23),
acpm(24),
acum(25),
rxinvpm(26),
rxrpv1u(27),
rxerpv1u(28),
rxrpv2u(29),
rxerv2u(30),
rxrpv3u(31),
rxerpv3u(32),
rxlpv2u(33),
txgqpu(34),
txsqpu(35),
rxinvpu(36),
rxeapf(37),
txeapf(38),
rxeapsf(39),
rxeaplf(40),
rxeaprf(41),
rxeappf(42),
rxieapf(43),
rxleeapf(44),
ethCrc(100),
ethUnderpkt(101),
ethOverpkt(102),
ethStatsfrag(103),
ethStajavvers(104),
modemInitline(200),
modemInitfial(201),
modemFecs(202),
modemEs(203),
modemSes(204),
modemLoss(205),
modemUas(206),
modemChcrc(207),
modemChfec(208)
}
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Type of the monitored object
Options:
1.cpu(1) -cpu
2.memory(2) -memory
3.rxdd(3) -The number of DHCP DISCOVER.
4.rxdrq(4) -The number of DHCP REQUEST.
5.rxdrl(5) -The number of DHCP RELEASE.
6.rxdi(6) -The number of DHCP INFORM.
7.rxuntrust(7) -The number of DHCP Option82 Packets with Untrusted Option82.
8.rxovl(8) -The number of DHCP Option82 Packets exceed the maximum size
after appending option82.
9.rxovlopt(9) -The number of packets exceed the maximum option82 size.
10.rxdisp(10) -The number of Discarded Packets of Upstream data flow from user to server in vlan.
11.txdisp(11) -The number of Discarded Packets of Downstream data flow from server to user in vlan.
12.rxgqpm(12) -The number of IGMP General Query Packets Received in MVLAN.
13.rxsqpm(13) -The number of IGMP Specific Query Packets Received in MVLAN.
14.rxrpv2m(14) -The number of IGMP Report Packet of Version 2 Received in MVLAN.
15.rxerpv2m(15) -The number of Error IGMP Report Packet of Version 2 Received in MVLAN.
16.rxrpv3m(16) -The number of IGMP Report Packets of Version 3 Received Per MVLAN.
17.rxerpv3m(17) -The number of Error IGMP Report Packets of Version 3 Received in MVLAN.
18.rxlpm(18) -The number of IGMP Leave Packets Received in MVLAN.
19.txgqpm(19) -The number of IGMP General Query Packets Send Out in MVLAN.
20.txsqpm(20) -The number of IGMP Specific Query Packets Send Out in MVLAN.
21.txrpv2m(21) -The number of IGMP Report Packets of Version 2 Send Out in MVLAN.
22.txerpv2m(22) -The number of IGMP Error Report Packets of Version 2 Send Out in Mvlan.
23.txlpm(23) -The number of IGMP Leave Packets Send Out in Mvlan.
24.acpm(24) -The number of IGMP Actived Programs in Mvlan.
25.acum(25) -The number of IGMP Actived Users in Mvlan.
26.rxinvpm(26) -The number of IGMP Invalid Packets Received in Mvlan.
27.rxrpv1u(27) -The number of IGMP Report Packets of Version v1 Received by user.
28.rxerpv1u(28) -The number of IGMP Error Report Packets of Version v1 Received by user.
29.rxrpv2u(29) -The number of IGMP Report Packets of Version v2 Received by user.
30.rxerv2u(30) -The number of Error IGMP Report Packets of Version v2 Received by user.
31.rxrpv3u(31) -The number of IGMP Report Packets of Version v3 Received by user.
32.rxerpv3u(32) -The number of Error IGMP Report Packets of Version v3 Received by user.
33.rxlpv2u(33) -The number of IGMP Leave Packets of Version v2 Received by user.
34.txgqpu(34) -The number of IGMP General Query Packets Send Out by user.
35.txsqpu(35) -The number of IGMP Specific Query Packets Send Out by user.
36.rxinvpu(36) -The number of IGMP Invalid Packets Received by user.
37.rxeapf(37) -The number of EAPOL Frames of any type that have been received.
38.txeapf(38) -The number of EAPOL Frames of any type that have been transmitted.
39.rxeapsf(39) -The number of EAPOL Start Frames that have been received.
40.rxeaplf(40) -The number of EAPOL Logoff frames that have been received.
41.rxeaprf(41) -The number of EAPOL Resp/Id Frames that have been received.
42.rxeappf(42) -The number of Valid EAPOL Response Frames (other than Resp/Id frames)
that have been received.
43.rxieapf(43) -The number of Invalid EAPOL frames that have been received.
44.rxleeapf(44) -The number of Length Error EAPOL frames that have been received.
45.ethCrc(100) -The total number of packets received that had a length of between 64 and 1518 ,
but had a bad FCS.
46.ethUnderpkt(101)-The total number of packets received that were less than 64 octets long
and were otherwise well formed.
47.ethOverpkt(102)-The total number of packets received that were longer than 1518 octets
and were otherwise well formed.
48.ethStatsfrag(103)-The total number of packets received that were less than 64 octets in
length and had a bad FCS.
49.ethStajavvers(104)-The total number of packets received that were nlonger than 1518 octets
had either a bad FCS.
50.modemInitline(200)-Count of full initializations attempted on the line since agent reset.
51.modemInitfial(201)-Count of failed full initializations on the line since agent reset.
52.modemFecs(202)-Count of seconds since agent reset that there was at least one FEC.
53.modemEs(203)-Count of seconds since agent reset that there was ATU-C and ATU-R.
(ATU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
ATU-R: FEBE >= 1 for one or more bearer channels OR
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1.)
54.modemSes(204)-Count of seconds since agent reset that there was ATU-C and ATU-R.
(ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
ATU-R: (FEBE summed over all bearer channels) >= 18 OR
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1)
55.modemLoss(205)-Count of seconds since agent reset that there was LOS.
56.modemUas(206) -Count of seconds in Unavailability State since agent reset.
57.modemChcrc(207)-Count of CRC-8 anomalies occurring in the channel since agent reset.
58.modemChfec(208)-Count of FEC anomalies occurring in the channel since agent reset.
This object is not supported currently.
"
::= { hwDefineTCAEntry 2 }
hwDefineAid OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Index of the monitored object. This object is not supported currently.
"
::= { hwDefineTCAEntry 3 }
hwDefineTmper OBJECT-TYPE
SYNTAX INTEGER
{
fifteenMinutes(1),
oneday(2)
}
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Monitoring period. This object is not supported currently.
Options:
1.fifteenMinutes(1) -monitoring period is fifteen minutes.
2.oneday(2) -monitoring period is one day.
"
::= { hwDefineTCAEntry 4 }
hwDefineThlev OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..6))
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"
Threshold of the monitored object. This object is not supported currently.
"
::= { hwDefineTCAEntry 5 }
hwDefineRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"
Row status. This object is not supported currently.
"
::= { hwDefineTCAEntry 6 }
-- Batch Query table
hwBatchQuery OBJECT IDENTIFIER ::= { hwBulkStatistics 4 }
hwBatchQueryMgmt OBJECT IDENTIFIER ::= { hwBatchQuery 1 }
-- Batch Query Capability table
hwBQueryCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBQueryCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of this table is hwBatchQueryType.
"
::= { hwBatchQueryMgmt 1 }
hwBQueryCapabilityEntry OBJECT-TYPE
SYNTAX HwBQueryCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of this entry is hwBatchQueryType.
"
INDEX { hwBatchQueryType }
::= { hwBQueryCapabilityTable 1 }
HwBQueryCapabilityEntry ::= SEQUENCE
{
hwBatchQueryType
Integer32,
hwBatchQueryCapability
OCTET STRING
}
hwBatchQueryType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Batch Query type.
Options:
1.ontinfo(1)-ont info.
2.ontMulticastForwardingTable(2)-ont multicast forwarding table.
3.ontLearnedMac(3)-ont learned MAC.
4.macinfo(4)-MAC info.
5.xdslSegmentinfo(5)- status parameters of XDSL subcarriers.
6.ontWifiExtendedInfo(6)-ont wifi used state and attached AP Info.
7.trafficBurstInfo(7)-traffic burst detection info.
8.ontPotsPortState(8)-ont pots port state info.
"
::= { hwBQueryCapabilityEntry 1 }
hwBatchQueryCapability OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the batch query capability. The capability is in the TLV format.
The format of the TLV is shown in the following figure.
---------------------------------------------------------
| TOTAL-LENGTH | TLV-TYPE | TLV-LENGTH | TLV-VALUE |
---------------------------------------------------------
| TLV-TYPE | TLV-LENGTH | TLV-VALUE |
------------------------------------------
| ................................. |
|-----------------------------------------
| TLV-TYPE | TLV-LENGTH | TLV-VALUE |
------------------------------------------
TOTAL-LENGTH occupies two bytes to store the whole length of all the TLV, including TOTAL-LENGTH itself.
TLV-TYPE occupies two bytes to store the TLV type.
TLV-LENGTH occupies two bytes to store the TLV length, which indicates the bytes TLV-VALUE occupies.
TLV-VALUE is the content of the TLV.
Assume that the ONT supported-capability is 00.17.00.00.00.04.00.00.00.3F.00.01.00.04.01.00.01.01.00.02.00.01.00.
The capability description is as follows:
----------------------
| TLV total length |
| 00.17 |
-----------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 00.00 | 00.04 | 00.00.00.3F |
-----------------------------------------------
| TLV2 type | TLV2 length | TLV2 value |
| 00.01 | 00.04 | 01.00.01.01 |
-----------------------------------------------
| TLV3 type | TLV3 length | TLV3 value |
| 00.02 | 00.01 | 00 |
-----------------------------------------------
TLV total length:
00.17: the total length of the TLV is 23 Bytes.
TLV1:
00.00: it is the field submask supported by the batch query.
00.04: the length of the TLV1 value is 4 Bytes.
00.00.00.3F: this value indicates that the supported fields are 0, 1, 2, 3, 4, and 5.
TLV2:
00.01: it is the TLV type list supported by the batch query.
00.04: the length of the TLV2 value is 4 Bytes.
01.00.01.01: this value indicates that values 256 and 257 are supported.
TLV3:
00.02: it indicates whether the batch query to be delayed.
00.01: the length of the TLV3 value is 1 Bytes.
00: it indicates that the batch query does not need to be delayed.
"
::= { hwBQueryCapabilityEntry 2 }
-- Batch Query Set table
hwBatchQuerySetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBatchQuerySetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of this table is hwBatchQuerySn.
"
::= { hwBatchQueryMgmt 2 }
hwBatchQuerySetEntry OBJECT-TYPE
SYNTAX HwBatchQuerySetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of this entry is hwBatchQuerySn.
"
INDEX { hwBatchQuerySn }
::= { hwBatchQuerySetTable 1 }
HwBatchQuerySetEntry ::= SEQUENCE
{
hwBatchQuerySn
Integer32,
hwBatchQueryCurrentType
Integer32,
hwBatchQueryParameter
OCTET STRING,
hwBatchQueryRowStatus
RowStatus
}
hwBatchQuerySn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Batch query SN.
"
::= { hwBatchQuerySetEntry 1 }
hwBatchQueryCurrentType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Current batch query type.
Options:
1.ontinfo(1)-ont info.
2.ontMulticastForwardingTable(2)-ont multicast forwarding table.
3.ontLearnedMac(3)-ont learned MAC.
4.macinfo(4)-MAC info.
5.xdslSegmentinfo(5) - status parameters of XDSL subcarriers.
6.ontWifiExtendedInfo(6)-ont wifi used state and attached AP Info.
7.trafficBurstInfo(7)-traffic burst detection info.
8.ontPotsPortState(8)-ont pots port state info.
"
::= { hwBatchQuerySetEntry 2 }
hwBatchQueryParameter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the batch query parameter to set. The parameter is in the TLV format and supports a maximum of 255 characters.
The format of the TLV is shown in the following figure.
The batch query can be based on board, port, or specific fields.
---------------------------------------------------------
| TOTAL-LENGTH | TLV-TYPE | TLV-LENGTH | TLV-VALUE |
---------------------------------------------------------
| TLV-TYPE | TLV-LENGTH | TLV-VALUE |
------------------------------------------
| ................................. |
|-----------------------------------------
| TLV-TYPE | TLV-LENGTH | TLV-VALUE |
------------------------------------------
TOTAL-LENGTH occupies two bytes to store the whole length of all the TLV, including TOTAL-LENGTH itself.
TLV-TYPE occupies two bytes to store the TLV type.
TLV-LENGTH occupies two bytes to store the TLV length, which indicates the bytes TLV-VALUE occupies.
TLV-VALUE is the content of the TLV.
For example, 00.0B.01.00.00.05.00.0C.02.00.02 indicates querying the multicast forwarding entries for ONT 2 based on subrack ID/slot ID/port ID 0/12/2.
The parameter description is as follows:
----------------------
| TLV total length |
| 00.0B |
--------------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 01.00 | 00.05 | 00.0C.02.00.02 |
--------------------------------------------------
TLV total length:
00.0B: the total length of the TLV is 11 Bytes.
TLV1:
01.00: indicates a query based on ONT.
00.05: the length of the TLV1 value is 5 Bytes
00.0C.02.00.02: indicates a query on the ONT 2 connected to port 0/12/2.
For example, 00.0F.01.01.00.09.00.0C.02.00.02.00.01.00.01 indicates querying the multicast forwarding entries for ETH port 1 on ONT 2 connected to port 0/12/2.
The parameter description is as follows:
----------------------
| TLV total length |
| 00.0F |
--------------------------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 01.01 | 00.09 | 00.0C.02.00.02.00.01.00.01 |
--------------------------------------------------------------
TLV total length:
00.0F: the total length of the TLV is 15 Bytes.
TLV1:
01.01: indicates a query based on a port on the ONT. Currently, only the ETH type is supported.
00.09: the length of the TLV1 value is 9 Bytes
00.0C.02.00.02.00.01.00.01: indicates the query for ETH port 1 on ONT 2 connected to port 0/12/2.
For example, 00.0A.01.01.00.04.00.00.0A.02 indicates that the dynamic MAC address is queried by port and frame ID/slot ID/port ID is 0/10/2.
The parameter description is as follows:
----------------------
| TLV total length |
| 00.0A |
--------------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 01.01 | 00.04 | 00.00.0A.02 |
--------------------------------------------------
TLV total length:
00.0A: indicates that the total length of the TLV is 10 bytes.
TLV1:
01.01: indicates the mode by which a dynamic MAC address is queried. 257 indicates that the dynamic MAC address is queried by port.
00.04: indicates that the length of the TLV1 value is 4 bytes.
00.00.0A.02: indicates a query on port 0/10/2.
For example, 00.0A.01.03.00.04.00.02.FF.FF indicates that the dynamic MAC address is queried by VLAN and the VLAN ID is 2.
The parameter description is as follows:
----------------------
| TLV total length |
| 00.0A |
--------------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 01.03 | 00.04 | 00.02.FF.FF |
--------------------------------------------------
TLV total length:
00.0A: indicates that the total length of the TLV is 10 bytes.
TLV1:
01.03: indicates the mode by which a dynamic MAC address is queried. 259 indicates that the dynamic MAC address is queried by VLAN.
00.04: indicates that the length of the TLV1 value is 4 bytes.
00.02: indicates a query on VLAN ID 2.
FF.FF: indicates reserved bytes.
For example, 00.0A.01.07.00.04.00.00.00.01 indicates that the dynamic MAC address is queried by serivce port and the service-port ID is 1.
The parameter description is as follows:
----------------------
| TLV total length |
| 00.0A |
--------------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 01.07 | 00.04 | 00.00.00.01 |
--------------------------------------------------
TLV total length:
00.0A: indicates that the total length of the TLV is 10 bytes.
TLV1:
01.07: indicates the mode by which a dynamic MAC address is queried. 263 indicates that the dynamic MAC address is queried by service port.
00.04: indicates that the length of the TLV1 value is 4 bytes.
00.00.00.01: indicates a query on service-port ID 1.
For example, 00.13.01.00.00.05.00.00.01.01.01.01.01.00.04.00.00.00.04 indicates that the XDSL subcarriers is queried by port,and frame ID/slot ID/port ID is 0/1/1,
the direction of the subcarrier is upstream.
The parameter description is as follows:
----------------------
| TLV total length |
| 00.13 |
--------------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 01.00 | 00.05 | 00.00.01.01.01 |
--------------------------------------------------
| TLV2 type | TLV2 length | TLV2 value |
| 01.01 | 00.04 | 00.00.00.04 |
--------------------------------------------------
TLV total length:
00.13: indicates the total length of the TLV is 19 bytes.
TLV1:
01.00: indicates the port and upstream or downstream direction of the subcarrier.
00.05: indicates the length of the TLV1 value is 5 bytes.
00.00.01.01.01: indicates a query on frame 0 slot 1 port 1,the subcarrier direction is upstream.
TLV2:
01.01: indicates the type of this query.
00.04: indicates that the length of the TLV2 value is 4 bytes.
00.00.00.04: indicates the type is Quiet Line Noise values.
TLV2 value is subcarrier type,each bit represents one type,the subcarrier type is as follows:
bit0 :real component of HLIN
bit1 :imaginary component of HLIN
bit2 :Hlog
bit3 :Quiet Line Noise
bit4 :SNR Margin.
bit5 :the bits allocation per subcarrier
bit6 :the gain allocation per subcarrier
bit7 :the TxPSD per subcarrier.
bit8 :the SnrMargin per subcarrier.
bit9 :Quiet Line Noise with vector
bit10:the RMC bits allocation per subcarrier
For example, 00.10.01.FF.00.0A.00.00.00.00.00.00.00.00.00.00 indicates that the ont wifi used state and attached AP Info is queried by FramID and the FramID is 0.
The parameter description is as follows:
----------------------
| TLV total length |
| 00.10 |
--------------------------------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 01.FF | 00.0A | 00.00.00.00.00.00.00.00.00.00 |
--------------------------------------------------------------------
TLV total length:
00.10: indicates that the total length of the TLV is 16 bytes.
TLV1:
01.FF: indicates a query based on frame.
00.0A: indicates that the length of the TLV1 value is 10 bytes.
00.00.00.00.00.00.00.00.00.00: indicates a query on frame ID 0.
For example, 00.1A.01.00.00.14.00.00.00.0A.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00 indicates that the burst traffic detection info is queried by instance ID and instance ID is 10.
The parameter description is as follows:
----------------------
| TLV total length |
| 00.1A |
---------------------------------------------------------------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 01.00 | 00.14 | 00.00.00.0A |00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00 |
---------------------------------------------------------------------------------------------------
TLV total length:
00.1A: indicates that the total length of the TLV is 26 bytes.
TLV1:
01.00: indicates the type of this query.
00.14: the length of the TLV1 value is 20 bytes.
00.00.00.0A: indicates a query on instance ID 10.
00.00.00.00.00.00.00.00: indicates the start time and date of quering instance ID 10.
00.00.00.00.00.00.00.00: indicates the end time and date of quering instance ID 10.
For example, 00.16.01.00.00.10.00.0A.02.00.01.00.00.00.00.00.00.00.00.00.00.00.00 indicates that the ont pots port info is queried by frame ID/slot ID/port ID is 0/10/2 or frame ID/slot ID/port ID is 0/10/2 and ontid is 1.
The parameter description is as follows:
----------------------
| TLV total length |
| 00.16 |
---------------------------------------------------------------------------------------------------
| TLV1 type | TLV1 length | TLV1 value |
| 01.00 | 00.10 | 00.0A.02.00.01.FF.FF.FF.FF.FF.FF.FF.FF.FF.FF.FF |
---------------------------------------------------------------------------------------------------
TLV total length:
00.16: indicates that the total length of the TLV is 22 bytes.
TLV1:
01.00: indicates the type of this query.
00.10: the length of the TLV1 value is 16 bytes.
00.0A.02: indicates a query on port 0/10/2.
00.01:indicates a query on ont.
FF.FF.FF.FF.FF.FF.FF.FF.FF.FF.FF: indicates the reserve field.
"
::= { hwBatchQuerySetEntry 3 }
hwBatchQueryRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Row operation object.
createAndGo(4)is supplied to create a new instance of a conceptual row.
destroy(6)is supplied to delete the instances associated with an existing conceptual row..
"
::= { hwBatchQuerySetEntry 4 }
-- Batch Query Get table
hwBatchQueryGetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBatchQueryGetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The indexes of this table are hwBatchQuerySn and hwBatchQueryStartNo.
"
::= { hwBatchQueryMgmt 3 }
hwBatchQueryGetEntry OBJECT-TYPE
SYNTAX HwBatchQueryGetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The indexes of this entry are hwBatchQuerySn and hwBatchQueryStartNo.
"
INDEX { hwBatchQuerySn,hwBatchQueryStartNo }
::= { hwBatchQueryGetTable 1 }
HwBatchQueryGetEntry ::= SEQUENCE
{
hwBatchQueryStartNo
Integer32,
hwBatchQueryReturnNum
Integer32,
hwBatchQueryReturnList
OCTET STRING,
hwBatchQueryIsLast
INTEGER
}
hwBatchQueryStartNo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Batch query Start NO.
"
::= { hwBatchQueryGetEntry 1 }
hwBatchQueryReturnNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Batch query return number .
"
::= { hwBatchQueryGetEntry 2 }
hwBatchQueryReturnList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
List of batch query result.
For example, MAC addresses queried in batches are as follows:
00.00.00.8C.02.01.0A.F0.00.00.00.01.01.02.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF.02.01.0A.F0.00.00.00.01.03.02.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF.02.01.0A.F0.00.00.00.01.02.02.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF.02.01.0A.F0.00.00.00.01.04.02.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF.02.01.00.01.00.E0.A1.26.00.52.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF
Parameters are described as follows:
00.00: 2 bytes, indicating queried data type.
00.8C: 2 bytes, indicating the total length of queried MAC addresses.
The length of MAC information is 28 bytes.
The query results for MAC addresses are as follows:
(1)02.01.0A.F0.00.00.00.01.01.02.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF
(2)02.01.0A.F0.00.00.00.01.03.02.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF
(3)02.01.0A.F0.00.00.00.01.02.02.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF
(4)02.01.0A.F0.00.00.00.01.04.02.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF
(5)02.01.00.01.00.E0.A1.26.00.52.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF
Five MAC addresses are parsed in the similar way. The parsing for the first MAC address is as follows:
02: 1 byte, indicating the MAC address type (1.Static MAC address; 2.Dynamic MAC address; 3.MAC anti-spoof).
01: 1 byte, indicating the MAC address location (1.MAC address with other physical locations; 2. MAC address on the Meth interface; 3. MAC address on the PW).
0A.F0: 2 bytes, indicating that the VLAN ID is 2800.
00.00.00.01.01.02: 6 bytes, indicating that the MAC address is 0000-0001-0102.
FF.FF: 2 bytes, indicating a reserved field.
FF.FF.FF.FF: 4 bytes, indicating the flow index (FFFFFFFF is an invalid value).
FF.FF: 2 bytes, indicating the bundle index (FFFF is an invalid value).
00.00.0A.02: 4 bytes, indicating that frame ID/slot ID/port ID is 0/10/2.
FF.FF: 2 bytes, indicating VPI. In xPON profile mode, it is ONT ID; In xPON distributing mode, it is Gemport ID (FFFF is an invalid value).
FF.FF: 2 bytes, indicating VCI. In xPON profile mode, it is GEM index (FFFF is an invalid value).
FF: 1 byte, indicating ont port type (FF is an invalid value).
FF: 1 byte, indicating ont port ID (FF is an invalid value).
"
::= { hwBatchQueryGetEntry 3 }
hwBatchQueryIsLast OBJECT-TYPE
SYNTAX INTEGER
{
islast(1),
notlast(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The result of batch query is the last one or not.
Options:
1.islast(1)-last.
2.notlast(2)-not last.
"
::= { hwBatchQueryGetEntry 4 }
hwBatchQueryTrapVbOids OBJECT IDENTIFIER ::= { hwBatchQuery 2 }
hwBatchQueryResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The result of batch query.
"
::= { hwBatchQueryTrapVbOids 1 }
hwBatchQueryTraps OBJECT IDENTIFIER ::= { hwBatchQuery 3 }
hwBatchQueryCommonTraps OBJECT IDENTIFIER ::= { hwBatchQueryTraps 1 }
hwBatchQueryCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwBatchQueryCommonTraps 0 }
hwBatchQueryResultTrap NOTIFICATION-TYPE
OBJECTS
{
hwBatchQuerySn,
hwBatchQueryResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the batch query is complete.
"
::= { hwBatchQueryCommonTrapsPrefix 1 }
--hwCollectSet
hwCollectSet OBJECT IDENTIFIER ::= { hwCfgInfoCollect 1 }
hwCollectSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCollectSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
NMS collect information table, providing add/modify/delete operations.
The host severs as client, while the NMS as server.
The index of this table is hwCollectTableName.
"
::= { hwCollectSet 1 }
hwCollectSetEntry OBJECT-TYPE
SYNTAX HwCollectSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
NMS collect information table, providing add/modify/delete operations.
The host severs as client, while the NMS as server.
The index of this entry is hwCollectTableName.
"
INDEX { IMPLIED hwCollectTableName }
::= { hwCollectSetTable 1 }
HwCollectSetEntry ::= SEQUENCE
{
hwCollectTableName OCTET STRING,
hwCollectOID OCTET STRING,
hwCollectTableRowStatus RowStatus
}
hwCollectTableName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The table name. It is in the format of ASCII code separated by '.'.
If the table name is specified to a|b, the index is 97.124.98.
Naming standard: In a table name, there should be one vertical line at most,
and the left side and right side of the vertical line cannot be null.
For example, identifier|table name or table name. The ASCII codes must be from 0x21 to 0x7E.
In the configuration phase, when a table name requires to be added, format identifier|all or all cannot be used.
"
::= { hwCollectSetEntry 1 }
hwCollectOID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Information of the OIDs. When the NMS adds the information about the entries,
the value of the information in the format of 'parent object OID:OID of sub object 1,
OID of sub object 2......'. This format is called entry object character string hereinafter.
The MIB object of the entry OID can be only the OID of the entry object.
For the scalar object, the OID of the parent object is directly used.
For example, to collect statistics of the objects
1.3.6.1.4.1.2011.6.3.4.1.3, 1.3.6.1.4.1.2011.6.3.4.1.4,
and 1.3.6.1.4.1.2011.6.3.4.1.1.5 in hwCpuDevTable, you need to enter the
objects in the format of '1.3.6.1.4.1.2011.6.3.4.1:3,4,5'.
"
::= { hwCollectSetEntry 2 }
hwCollectTableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Row status.
createAndGo(4) is supplied to create a new instance of a conceptual row.
destroy(6) is supplied to delete the instances associated with an existing conceptual row.
"
::= { hwCollectSetEntry 3 }
-- hwCollectOperationSet
hwCollectOperationSet OBJECT IDENTIFIER ::= { hwCfgInfoCollect 2 }
hwCollectState OBJECT-TYPE
SYNTAX INTEGER
{
idle(1),
collecting(2),
waitfetch(3),
tranfering(4),
waitcollect(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Operation status of the information collection.
Options:
1.idle(1) -indicates that the operation is in the idle state.
2.collecting(2) -indicates that the information is being collected.
3.waitfetch(3) -indicates that the information collection is complete and the data is to be extracted.
4.tranfering(4) -indicates that the file is being transferred.
5.waitcollect(5) -indicates that the information is waiting to collect.
"
::= { hwCollectOperationSet 1 }
hwCollectOperation OBJECT-TYPE
SYNTAX INTEGER
{
begin(1),
stop(2),
processing(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Administration operation of the information collection.
Options:
1.begin(1) -indicates that the information collection starts.
2.stop(2) -indicates that the information collection stops.
3.processing(3)-indicates that the collection is ongoing.
In the begin and stop operations, the object hwCollectTableInfo needs to be bound.
"
::= { hwCollectOperationSet 2 }
hwCollectTableInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..510))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Information of the table. This object is used for informing the host of the name of the entry
that needs to be collected before the collection is started.
If there are multiple entries, a comma is used to separate them.
For example, if the NMS has already configured three tables of entries, namely, a|b, a|c,
and a|d, this parameter can be set to a|b,a|c before the information collection is started.
It indicates that information in a|b and a|c needs to be collected.
If you want to collect the information about all tables carrying a certain flag,
configure to flag|all (flag is an identifier) and the information about all required tables can be collected.
For example, when you have tables a|b, a|c, and a|d (a is an identifier; b, c, and d are table names) and configure a|all,
the information about the three tables can be collected.
when the value of hwCollectTableInfo is the collection of many table names that are split by commas,
you are not allowed to name a single table with all or Flag|all (Flag stands for any letter of an ASCII code from 0x21 to 0x7E);
when the value of hwCollectTableInfo is a single table name, you can name the table with all or Flag|all.
(Flag stands for any letter of an ASCII code from 0x21 to 0x7E).
"
::= { hwCollectOperationSet 3 }
hwWaitfetchTimeout OBJECT-TYPE
SYNTAX Integer32 (1..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Duration (s) after which the Waitfetch state times out. After the expiration,
the Waitfetch status collection automatically stops.
"
::= { hwCollectOperationSet 4 }
hwCollectMode OBJECT-TYPE
SYNTAX INTEGER
{
all(1),
incremental(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Mode of the information collection.
Options:
1.all(1) -indicates that collects data of all tables.
2.incremental(2) -indicates that collects data of tables have changes compared with the last collection.
default value is all(1).
"
::= { hwCollectOperationSet 5 }
hwCollectSeq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Seq of the information collection.
"
::= { hwCollectOperationSet 6 }
hwBackupCollect OBJECT IDENTIFIER ::= { hwCfgInfoCollect 3 }
hwBackupCollectInfoParaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBackupCollectInfoParaEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Backup collectinfo parameter table. This object is not supported currently.
The index of this table is hwBackupCollectInfoRequestID.
"
::= { hwBackupCollect 1 }
hwBackupCollectInfoParaEntry OBJECT-TYPE
SYNTAX HwBackupCollectInfoParaEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Backup collectinfo parameter table. This object is not supported currently.
The index of this entry is hwBackupCollectInfoRequestID.
"
INDEX { hwBackupCollectInfoRequestID }
::= { hwBackupCollectInfoParaTable 1 }
HwBackupCollectInfoParaEntry ::= SEQUENCE
{
hwBackupCollectInfoServerIpAddr
IpAddress,
hwBackupCollectInfoMode
INTEGER,
hwBackupCollectInfoFileName
OCTET STRING,
hwBackupCollectInfoUserName
OCTET STRING,
hwBackupCollectInfoPassword
OCTET STRING,
hwBackupCollectInfoRequestID
Integer32
}
hwBackupCollectInfoServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
The IP address of server. This object is not supported currently.
"
::= { hwBackupCollectInfoParaEntry 1 }
hwBackupCollectInfoMode OBJECT-TYPE
SYNTAX INTEGER
{
tftp(1),
modem(2),
ftp(3),
sftp(5),
other(6)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Load protocol:tftp and MODEM currently supported.
Options:
1.tftp(1) -indicates load protocol is tftp.
2.modem(2)-indicates load protocol is modem.
3.ftp(3) -indicates load protocol is ftp.
4.sftp(5) -indicates load protocol is sftp.
5.other(6)-indicates load protocol is other type.
"
::= { hwBackupCollectInfoParaEntry 2 }
hwBackupCollectInfoFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..127))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Backup file name.
"
::= { hwBackupCollectInfoParaEntry 3 }
hwBackupCollectInfoUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
The backup user name,which is necessary in FTP mode and SFTP mode
while unnecessary in TFTP mode. This object is not supported currently.
"
::= { hwBackupCollectInfoParaEntry 4 }
hwBackupCollectInfoPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
The backup user password, which is necessary in FTP mode and SFTP mode,
while unnecessary in TFTP mode. This object is not supported currently.
"
::= { hwBackupCollectInfoParaEntry 5 }
hwBackupCollectInfoRequestID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
The request index for xml. This object is not supported currently.
"
::= { hwBackupCollectInfoParaEntry 6 }
-- end of hwBackupCollectInfoParaTable
hwCfgInfoQuery OBJECT IDENTIFIER ::= { hwCfgInfoCollect 4 }
hwCfgInfoQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfgInfoQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used for querying information in real time.
The indexes of this table are hwQueryCondition and hwQueryContent.
When the table is issued, the length of the hwQueryCondition needs to be specified,
and hwQueryCondition and hwQueryContent need to be converted into ASCII codes for issuing.
For example, if you need to issue conditions for querying the ID and name
of the alarm whose type is device and severity is critical,
the issued hwQueryCondition is 1.3.6.1.4.1.2011.6.30.7.1.1.6=4, 1.3.6.1.4.1.2011.6.30.6.1.1.4=2,
which can be converted into the ASCII
code 49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.46.54.46.51.48.46.55.
46.49.46.49.46.54.61.52.44.49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.
46.54.46.51.48.46.54.46.49.46.49.46.52.61.50;
the issued hwQueryContent is abc=1.3.6.1.4.1.2011.6.30.7.1.1:1,2,
which can be converted into the ASCII code 97.98.99.61.49.46.51.46.54.46.
49.46.52.46.49.46.50.48.49.49.46.54.46.51.48.46.55.46.49.46.49.58.49.44.50.
With the length of the hwQueryCondition, the finally issued index is
63.49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.46.54.46.51.48.46.55.46.
49.46.49.46.54.61.52.44.49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.46.
54.46.51.48.46.54.46.49.46.49.46.52.61.50.97.98.99.61.49.46.51.46.54.46.49.46.52.46.
49.46.50.48.49.49.46.54.46.51.48.46.55.46.49.46.49.58.49.44.50.
"
::= { hwCfgInfoQuery 1 }
hwCfgInfoQueryEntry OBJECT-TYPE
SYNTAX HwCfgInfoQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used for querying information in real time.
The indexes of this entry are hwQueryCondition and hwQueryContent.
When the table is issued, the length of the hwQueryCondition needs to be specified,
and hwQueryCondition and hwQueryContent need to be converted into ASCII codes for issuing.
For example, if you need to issue conditions for querying the ID and name
of the alarm whose type is device and severity is critical,
the issued hwQueryCondition is 1.3.6.1.4.1.2011.6.30.7.1.1.6=4, 1.3.6.1.4.1.2011.6.30.6.1.1.4=2,
which can be converted into the ASCII
code 49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.46.54.46.51.48.46.55.
46.49.46.49.46.54.61.52.44.49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.
46.54.46.51.48.46.54.46.49.46.49.46.52.61.50;
the issued hwQueryContent is abc=1.3.6.1.4.1.2011.6.30.7.1.1:1,2,
which can be converted into the ASCII code 97.98.99.61.49.46.51.46.54.46.
49.46.52.46.49.46.50.48.49.49.46.54.46.51.48.46.55.46.49.46.49.58.49.44.50.
With the length of the hwQueryCondition, the finally issued index is
63.49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.46.54.46.51.48.46.55.46.
49.46.49.46.54.61.52.44.49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.46.
54.46.51.48.46.54.46.49.46.49.46.52.61.50.97.98.99.61.49.46.51.46.54.46.49.46.52.46.
49.46.50.48.49.49.46.54.46.51.48.46.55.46.49.46.49.58.49.44.50.
"
INDEX { hwQueryCondition, IMPLIED hwQueryContent }
::= { hwCfgInfoQueryTable 1 }
HwCfgInfoQueryEntry ::= SEQUENCE
{
hwQueryCondition
OCTET STRING,
hwQueryContent
OCTET STRING,
hwQueryResult
OCTET STRING
}
hwQueryCondition OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Condition index string. The value is in the format of 'OID1=......, OID2=......'.
"
::= { hwCfgInfoQueryEntry 1 }
hwQueryContent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Query content. The format is 'name of entry 1 = OID of entry 1:OID number of sub object 1,
OID number of sub object 2...... + name of entry 2 = OID of entry 2:number of sub object 1,
number of sub object 2......'.
"
::= { hwCfgInfoQueryEntry 2 }
hwQueryResult OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..8192))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Query result.
"
::= { hwCfgInfoQueryEntry 3 }
hwCollectTrapVbOids OBJECT IDENTIFIER ::= { hwCfgInfoCollect 5 }
hwCollectFileResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Result of file Collection.
If the result is 1, it indicates that the configuration file is generated successfully.
If the result is 2, it indicates that the generation of the configuration file fails.
"
::= { hwCollectTrapVbOids 1 }
hwCollectTraps OBJECT IDENTIFIER ::= { hwCfgInfoCollect 6 }
hwCollectAlarmTraps OBJECT IDENTIFIER ::= { hwCollectTraps 1 }
hwCollectCommonTraps OBJECT IDENTIFIER ::= { hwCollectTraps 2 }
hwCollectCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwCollectCommonTraps 0 }
hwCollectFileResultTrap NOTIFICATION-TYPE
OBJECTS
{
hwCollectFileResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the configuration information is collected.
"
::= { hwCollectCommonTrapsPrefix 1 }
END
View Git Blame Copy Permalink