WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HUAWEI-ATM-MIB

3074 lines
101 KiB
Plaintext
Raw Blame History

-- ==================================================================
-- Copyright (C) 2018 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI Private ATM Interface MIB
-- Reference:
-- Version: V2.17
-- History:
-- V1.0 initial
-- V1.1 add hwAtmPvcGroupTable and hwAtmPvcGroupMemTable for
-- pvc-group; add hwAtmPvcPppTable for PPPoA on demand; add a node
-- hwAtmPvcBridgeBroadcast in hwAtmPvcBridgeTable for bridge.
-- V1.2 add hwAtmPvcDynamicTable for auto PVC, add hwAtmPvcDynamicPppTable
-- for PPP on auto PVC, add hwAtmPvcDynamicBridgeTable for auto PVC,
-- add hwAtmDynamicEncapsulateTable for auto PVC.
-- V2.11 add hwAtmPvcStatisticInputCellDrops,hwAtmPvcStatisticInputPktDrops,
-- hwAtmPvcStatisticOutputCellDrops and hwAtmPvcStatisticOutputPktDrops
-- for HwAtmPvcStatisticEntry.
-- V2.12 modify the invalid value of hwAtmPvcServiceBuffer and hwAtmPvpServiceBuffer
-- from 4294967295 to -1. Modify the MAX-ACCESS of hwAtmVpcConnectivityTestRowStatus
-- and hwAtmVccConnectivityTestRowStatus from accessible-for-notify to read-create.
-- ==================================================================
-- ==================================================================
--
-- Variables and types be imported
--
-- ==================================================================
HUAWEI-ATM-MIB DEFINITIONS ::= BEGIN
IMPORTS
AtmVpIdentifier, AtmVcIdentifier
FROM ATM-TC-MIB
atmMIBObjects
FROM ATM-MIB
hwDatacomm
FROM HUAWEI-MIB
ifName, InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
,NOTIFICATION-GROUP
FROM SNMPv2-CONF
IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE,
Counter64
FROM SNMPv2-SMI
RowStatus, TruthValue, DisplayString
FROM SNMPv2-TC
hwFrameIndex, hwSlotIndex, hwPortIndex
FROM HUAWEI-DEVICE-MIB;
-- October 17, 2007 at 22:30 GMT
-- October 17, 2007 at 22:30 GMT
hwAtmMIB MODULE-IDENTITY
LAST-UPDATED "201803160000Z"
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"V1.3, add hwAtmPvcStatisticInputCellDrops,hwAtmPvcStatisticInputPktDrops,
hwAtmPvcStatisticOutputCellDrops and hwAtmPvcStatisticOutputPktDrops
for HwAtmPvcStatisticEntry."
REVISION "201803160000Z"
DESCRIPTION
"V2.17, modify default value of hwAtmVccAal5EncapsType and hwAtmPvcDynamicAal5EncapsType."
REVISION "201801130000Z"
DESCRIPTION
"V2.16, modify node description."
REVISION "201702170000Z"
DESCRIPTION
"V2.15, modify the description of hwAtmVpcConnectivityTestResultNotify and hwAtmVccConnectivityTestResultNotify."
REVISION "201612270000Z"
DESCRIPTION
"V2.14, add trap node hwNoAtmResourceAlarmTrap of table hwAtmTraps."
REVISION "201509300000Z"
DESCRIPTION
"V2.13, add hwAtmPvcQueueStatisticTable for pvc-queue."
REVISION "201509300000Z"
DESCRIPTION
"Modify the MAX-ACCESS of hwAtmPvcTransmittalDirection from not-accessible to read-only."
REVISION "201407280000Z"
DESCRIPTION
"Modify the invalid value of hwAtmPvcServiceBuffer and hwAtmPvpServiceBuffer from 4294967295 to -1.
Modify the MAX-ACCESS of hwAtmVpcConnectivityTestRowStatus and hwAtmVccConnectivityTestRowStatus
from accessible-for-notify to read-create"
REVISION "201402180000Z"
DESCRIPTION
"This MIB is mainly used to configure the ATM OC-3/STM-1 and ATM OC-12/STM-4
interface, IPoA, IPoEoA, PVC service type, OAM F5 loopback, parameters of
the VP limit, and mapping between the peer VPI and the local VPI."
REVISION "201103250000Z"
DESCRIPTION
"V1.2, add hwAtmPvcDynamicTable for auto PVC, add hwAtmDynamicPppTable
for PPP on auto PVC, add hwAtmDynamicBridgeTable for auto PVC,
add hwAtmDynamicEncapsulateTable for auto PVC."
REVISION "201009250000Z"
DESCRIPTION
"V1.1, add hwAtmPvcGroupTable and hwAtmPvcGroupMemTable for
pvc-group; add hwAtmPvcPppTable for PPPoA on demand; add a node
hwAtmPvcBridgeBroadcast in hwAtmPvcBridgeTable for bridge."
REVISION "200710172230Z"
DESCRIPTION
"V1.0, the initial revision for MIB about ATM protocl."
::= { hwDatacomm 156 }
--
-- Node definitions
--
-- Node definitions
--
hwAtmObjects OBJECT IDENTIFIER ::= { hwAtmMIB 1 }
-- hwAtmTable Table
--
hwAtmTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the parameters of the ATM interface."
::= { hwAtmObjects 1 }
hwAtmEntry OBJECT-TYPE
SYNTAX HwAtmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the parameters of the ATM interface."
INDEX { hwAtmIfIndex }
::= { hwAtmTable 1 }
HwAtmEntry ::=
SEQUENCE {
hwAtmIfIndex
InterfaceIndex,
hwAtmIfType
INTEGER,
hwAtmClock
INTEGER,
hwAtmFrameFormat
INTEGER,
hwAtmScramble
TruthValue,
hwAtmLoopback
INTEGER,
hwAtmPitp
INTEGER,
hwAtmFlagJ0Mode
INTEGER,
hwAtmFlagJ0Value
Integer32,
hwAtmFlagJ0Trace
OCTET STRING,
hwAtmFlagJ1Mode
INTEGER,
hwAtmFlagJ1Value
Integer32,
hwAtmFlagJ1Trace
OCTET STRING,
hwAtmFlagC2Value
Integer32
}
hwAtmIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmEntry 1 }
hwAtmIfType OBJECT-TYPE
SYNTAX INTEGER
{
oc3OrStm1(1),
oc12OrStm4(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the interface type."
::= { hwAtmEntry 11 }
hwAtmClock OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
slave(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Master clock: uses the internal clock signal.
Slave clock: uses the line clock signal."
::= { hwAtmEntry 12 }
hwAtmFrameFormat OBJECT-TYPE
SYNTAX INTEGER
{
sdh(1),
sonet(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For the optical interface STM-1/STM-4, the frame format on the ATM interface
is SDH; for the OC-3/OC-12 interface, the frame format is SONET.
The default frame format is SDH."
DEFVAL { sdh }
::= { hwAtmEntry 13 }
hwAtmScramble OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By default, the scramble function is enabled. The scramble function
takes effect only on payload rather than cell header.
true: enables the scramble function. false: disables the scramble function."
DEFVAL { true }
::= { hwAtmEntry 14 }
hwAtmLoopback OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2),
payload(3),
none(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the loopback function of the channel.
local: enables the local loopback on the interface.
remote: enables the remote loopback on the interface.
payload: enables the remote payload loopback on the interface.
By default, all loopback functions are disabled."
DEFVAL { none }
::= { hwAtmEntry 15 }
hwAtmPitp OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the function of PITP."
DEFVAL { false }
::= { hwAtmEntry 16 }
hwAtmFlagJ0Mode OBJECT-TYPE
SYNTAX INTEGER
{
j01ByteMode(1),
j016ByteMode(2),
j064ByteOrNullMode(3),
peer(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the overhead byte of the SDH frame. j0: sets section trace byte.
The default value is j016ByteMode(2);hwAtmFlagJ0Trace:NetEngine."
::= { hwAtmEntry 17 }
hwAtmFlagJ0Value OBJECT-TYPE
SYNTAX Integer32 (0..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the value of j01ByteMode. When hwAtmFlagJ0Mode is set to j01ByteMode, hwAtmFlagJ0Value takes effect."
::= { hwAtmEntry 18 }
hwAtmFlagJ0Trace OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set section trace byte.
When hwAtmFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect.
When hwAtmFlagJ0Mode is set to j016ByteMode, the value of this variable is up to 15 characters trace byte.
When hwAtmFlagJ0Mode is set to j064ByteOrNullMode, the value of this variable is up to 64 characters trace byte."
::= { hwAtmEntry 19 }
hwAtmFlagJ1Mode OBJECT-TYPE
SYNTAX INTEGER
{
j11ByteMode(1),
j116ByteMode(2),
j164ByteOrNullMode(3),
peer(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the overhead byte of the SDH frame. j1: sets path trace byte.
The default value is j116ByteMode(2);hwAtmFlagJ1Trace:NetEngine."
::= { hwAtmEntry 20 }
hwAtmFlagJ1Value OBJECT-TYPE
SYNTAX Integer32 (0..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the value of j11ByteMode. When hwAtmFlagJ1Mode is set to j11ByteMode, hwAtmFlagJ1Value takes effect."
::= { hwAtmEntry 21 }
hwAtmFlagJ1Trace OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set path trace byte.
When hwAtmFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect.
When hwAtmFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte.
When hwAtmFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte."
::= { hwAtmEntry 22 }
hwAtmFlagC2Value OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF.
The default value is 0x02."
::= { hwAtmEntry 23 }
-- hwAtmMapPvpTable table
--
hwAtmMapPvpTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmMapPvpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the mapping between the peer VPI and the local
VPI."
::= { hwAtmObjects 2 }
hwAtmMapPvpEntry OBJECT-TYPE
SYNTAX HwAtmMapPvpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the mapping between the peer VPI and the local
VPI."
INDEX { hwAtmMapPvpIfIndex, hwAtmMapPvpVplVpi }
::= { hwAtmMapPvpTable 1 }
HwAtmMapPvpEntry ::=
SEQUENCE {
hwAtmMapPvpIfIndex
InterfaceIndex,
hwAtmMapPvpVplVpi
AtmVpIdentifier,
hwAtmMapPvpRemoteVplVpi
AtmVpIdentifier,
hwAtmMapPvpBi
INTEGER,
hwAtmMapPvpRowStatus
RowStatus
}
hwAtmMapPvpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmMapPvpEntry 1 }
hwAtmMapPvpVplVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the local VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095."
::= { hwAtmMapPvpEntry 2 }
hwAtmMapPvpRemoteVplVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the peer VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095."
::= { hwAtmMapPvpEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.156.1.2.1.12
hwAtmMapPvpBi OBJECT-TYPE
SYNTAX INTEGER
{
downdirectional(0),
bidirectional(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwAtmMapPvpEntry 12 }
hwAtmMapPvpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create or delete an object."
::= { hwAtmMapPvpEntry 51 }
-- hwAtmMapPvcTable table
--
hwAtmMapPvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmMapPvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the mapping between the peer VPI/VCI
and the local VPI/VCI."
::= { hwAtmObjects 3 }
hwAtmMapPvcEntry OBJECT-TYPE
SYNTAX HwAtmMapPvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the mapping between the peer VPI/VCI
and the local VPI/VCI."
INDEX { hwAtmMapPvcIfIndex, hwAtmMapPvcVclVpi, hwAtmMapPvcVclVci }
::= { hwAtmMapPvcTable 1 }
HwAtmMapPvcEntry ::=
SEQUENCE {
hwAtmMapPvcIfIndex
InterfaceIndex,
hwAtmMapPvcVclVpi
AtmVpIdentifier,
hwAtmMapPvcVclVci
AtmVcIdentifier,
hwAtmMapPvcRemoteVclVci
AtmVcIdentifier,
hwAtmMapPvcRemoteVclVpi
AtmVpIdentifier,
hwAtmMapPvcBi
INTEGER,
hwAtmMapPvcRowStatus
RowStatus
}
hwAtmMapPvcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmMapPvcEntry 1 }
hwAtmMapPvcVclVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the local VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095."
::= { hwAtmMapPvcEntry 2 }
hwAtmMapPvcVclVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the local VCI value. VCI is short for Virtual Channel Identifier.
The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are
reserved for specail use."
::= { hwAtmMapPvcEntry 3 }
hwAtmMapPvcRemoteVclVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the peer VCI value. VCI is short for Virtual Channel Identifier.
The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are
reserved for specail use."
::= { hwAtmMapPvcEntry 11 }
hwAtmMapPvcRemoteVclVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the peer VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095."
::= { hwAtmMapPvcEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.156.1.3.1.13
hwAtmMapPvcBi OBJECT-TYPE
SYNTAX INTEGER
{
downdirectional(0),
bidirectional(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwAtmMapPvcEntry 13 }
hwAtmMapPvcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create or delete an object."
::= { hwAtmMapPvcEntry 51 }
hwAtmServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the service type and related parameters
for the PVC."
::= { hwAtmObjects 4 }
hwAtmServiceEntry OBJECT-TYPE
SYNTAX HwAtmServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the service type for the PVC."
INDEX { hwAtmServiceName }
::= { hwAtmServiceTable 1 }
HwAtmServiceEntry ::=
SEQUENCE {
hwAtmServiceName
OCTET STRING,
hwAtmServiceType
INTEGER,
hwAtmServiceOutputPcr
Integer32,
hwAtmServiceOutputScr
Integer32,
hwAtmServiceOutputMbs
Integer32,
hwAtmServiceCbrCdvtValue
Integer32,
hwAtmServiceOutputMcr
Integer32,
hwAtmServiceRowStatus
RowStatus
}
hwAtmServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name of the service type. The name is a string
of 1 to 31 characters."
::= { hwAtmServiceEntry 1 }
hwAtmServiceType OBJECT-TYPE
SYNTAX INTEGER
{
cbr(1),
vbrNrt(2),
vbrRt(3),
ubr(4),
ubrPlus(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the service type for the PVC as required."
DEFVAL { ubr }
::= { hwAtmServiceEntry 11 }
hwAtmServiceOutputPcr OBJECT-TYPE
SYNTAX Integer32 (0 | 8..599040)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the peak output rate of the ATM cell.
When hwPvcServiceTableType is ubr, the peak output rate is 0."
DEFVAL { 149760 }
::= { hwAtmServiceEntry 12 }
hwAtmServiceOutputScr OBJECT-TYPE
SYNTAX Integer32 (0 | 8..599040)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the peak output rate of the ATM cell.
When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0."
DEFVAL { 149760 }
::= { hwAtmServiceEntry 13 }
hwAtmServiceOutputMbs OBJECT-TYPE
SYNTAX Integer32 (0 | 1..512)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the peak output rate of the ATM cell.
When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0."
::= { hwAtmServiceEntry 14 }
hwAtmServiceCbrCdvtValue OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the limit of the ATM cell delay variation.
When hwPvcServiceTableType is cbr, the variable is valid.
For other service types, the variable is 0."
DEFVAL { 500 }
::= { hwAtmServiceEntry 15 }
hwAtmServiceOutputMcr OBJECT-TYPE
SYNTAX Integer32 (0 | 8..599040)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the mini width guarantee bit rate of the ATM cell.
When hwPvcServiceTableType is ubr, the peak output rate is 0."
DEFVAL { 149760 }
::= { hwAtmServiceEntry 16 }
hwAtmServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create or delete an object."
::= { hwAtmServiceEntry 51 }
hwAtmPvcServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the service type for the PVC."
::= { hwAtmObjects 5 }
hwAtmPvcServiceEntry OBJECT-TYPE
SYNTAX HwAtmPvcServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the service type for the PVC."
INDEX { hwAtmPvcServiceIfIndex, hwAtmPvcServiceVpi, hwAtmPvcServiceVci, hwAtmPvcTransmittalDirection }
::= { hwAtmPvcServiceTable 1 }
HwAtmPvcServiceEntry ::=
SEQUENCE {
hwAtmPvcServiceIfIndex
InterfaceIndex,
hwAtmPvcServiceVpi
AtmVpIdentifier,
hwAtmPvcServiceVci
AtmVcIdentifier,
hwAtmPvcServiceName
OCTET STRING,
hwAtmPvcTransmittalDirection
INTEGER,
hwAtmPvcPriority
Integer32,
hwAtmPvcServiceBuffer
Integer32,
hwAtmPvcServiceRowStatus
RowStatus
}
hwAtmPvcServiceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmPvcServiceEntry 1 }
hwAtmPvcServiceVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the local VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095."
::= { hwAtmPvcServiceEntry 2 }
hwAtmPvcServiceVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the local VCI value. VCI is short for Virtual Channel Identifier.
The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535
are reserved for specail use."
::= { hwAtmPvcServiceEntry 3 }
hwAtmPvcServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name of the service type. The name is a string
of 1 to 31 characters."
::= { hwAtmPvcServiceEntry 11 }
hwAtmPvcTransmittalDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
output(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the input or output tpye of the service type."
::= { hwAtmPvcServiceEntry 21 }
hwAtmPvcPriority OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority of the output service."
DEFVAL { 7 }
::= { hwAtmPvcServiceEntry 22 }
hwAtmPvcServiceBuffer OBJECT-TYPE
SYNTAX Integer32 (128..8192|-1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The range of buffer,0xFFFFFFFF is invalid value for ima/serial interface which not support."
::= { hwAtmPvcServiceEntry 23 }
hwAtmPvcServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create or delete an object."
::= { hwAtmPvcServiceEntry 51 }
hwAtmVpVlanMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmVpVlanMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the VP vlan map."
::= { hwAtmObjects 6 }
hwAtmVpVlanMapEntry OBJECT-TYPE
SYNTAX HwAtmVpVlanMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the VP vlan map."
INDEX { hwAtmVpVlanMapIfIndex, hwAtmVpVlanMapVpi, hwAtmVpVlanMapPeVid }
::= { hwAtmVpVlanMapTable 1 }
HwAtmVpVlanMapEntry ::=
SEQUENCE {
hwAtmVpVlanMapIfIndex
InterfaceIndex,
hwAtmVpVlanMapVpi
AtmVpIdentifier,
hwAtmVpVlanMapPeVid
Integer32,
hwAtmVpVlanMapRowStatus
RowStatus
}
hwAtmVpVlanMapIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmVpVlanMapEntry 1 }
hwAtmVpVlanMapVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPI."
::= { hwAtmVpVlanMapEntry 2 }
hwAtmVpVlanMapPeVid OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PE VLAN ID."
::= { hwAtmVpVlanMapEntry 11 }
hwAtmVpVlanMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus. "
::= { hwAtmVpVlanMapEntry 51 }
hwAtmVcVlanMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmVcVlanMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the VC vlan map."
::= { hwAtmObjects 7 }
hwAtmVcVlanMapEntry OBJECT-TYPE
SYNTAX HwAtmVcVlanMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the VC vlan map."
INDEX { hwAtmVcVlanMapIfIndex, hwAtmVcVlanMapVpi, hwAtmVcVlanMapCeVid }
::= { hwAtmVcVlanMapTable 1 }
HwAtmVcVlanMapEntry ::=
SEQUENCE {
hwAtmVcVlanMapIfIndex
InterfaceIndex,
hwAtmVcVlanMapVpi
AtmVpIdentifier,
hwAtmVcVlanMapBeginVci
Integer32,
hwAtmVcVlanMapEndVci
Integer32,
hwAtmVcVlanMapCeVid
Integer32,
hwAtmVpVlanMapServiceName
OCTET STRING,
hwAtmVcVlanMapPiority
Integer32,
hwAtmVcVlanMapPBit
Integer32,
hwAtmVcVlanMapRowStatus
RowStatus
}
hwAtmVcVlanMapIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmVcVlanMapEntry 1 }
hwAtmVcVlanMapVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPI."
::= { hwAtmVcVlanMapEntry 2 }
hwAtmVcVlanMapBeginVci OBJECT-TYPE
SYNTAX Integer32 (0..2|5..65534)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Begin VCI Value, not config 3 or 4."
::= { hwAtmVcVlanMapEntry 11 }
hwAtmVcVlanMapEndVci OBJECT-TYPE
SYNTAX Integer32 (0..2|5..65534)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End VCI Value, not config 3 or 4."
::= { hwAtmVcVlanMapEntry 12 }
hwAtmVcVlanMapCeVid OBJECT-TYPE
SYNTAX Integer32 (0..4089)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"CE VLAN ID."
::= { hwAtmVcVlanMapEntry 13 }
hwAtmVpVlanMapServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name of the service type. The name is a string
of 1 to 31 characters."
::= { hwAtmVcVlanMapEntry 14 }
hwAtmVcVlanMapPiority OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Piority."
DEFVAL { 1 }
::= { hwAtmVcVlanMapEntry 15 }
hwAtmVcVlanMapPBit OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the p-bit value,the default value is 0."
DEFVAL { 0 }
::= { hwAtmVcVlanMapEntry 18 }
hwAtmVcVlanMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus. "
::= { hwAtmVcVlanMapEntry 51 }
hwAtmPvpServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvpServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the service type for the PVP."
::= { hwAtmObjects 8 }
hwAtmPvpServiceEntry OBJECT-TYPE
SYNTAX HwAtmPvpServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the service type for the PVP."
INDEX { hwAtmPvpServiceIfIndex, hwAtmPvpServiceVpi }
::= { hwAtmPvpServiceTable 1 }
HwAtmPvpServiceEntry ::=
SEQUENCE {
hwAtmPvpServiceIfIndex
InterfaceIndex,
hwAtmPvpServiceVpi
AtmVpIdentifier,
hwAtmPvpServiceName
OCTET STRING,
hwAtmPvpTransmittalDirection
INTEGER,
hwAtmPvpPriority
Integer32,
hwAtmPvpServiceBuffer
Integer32,
hwAtmPvpServiceRowStatus
RowStatus
}
hwAtmPvpServiceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmPvpServiceEntry 1 }
hwAtmPvpServiceVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the local VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095."
::= { hwAtmPvpServiceEntry 2 }
hwAtmPvpServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name of the service type. The name is a string
of 1 to 31 characters."
::= { hwAtmPvpServiceEntry 11 }
hwAtmPvpTransmittalDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
output(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the input or output tpye of the service type."
::= { hwAtmPvpServiceEntry 21 }
hwAtmPvpPriority OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the priority of the output service."
DEFVAL { 7 }
::= { hwAtmPvpServiceEntry 22 }
hwAtmPvpServiceBuffer OBJECT-TYPE
SYNTAX Integer32 (128..8192|-1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The range of buffer,0xFFFFFFFF is invalid value for ima/serial interface which not support"
::= { hwAtmPvpServiceEntry 23 }
hwAtmPvpServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create or delete an object."
::= { hwAtmPvpServiceEntry 51 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9
hwAtmPvcStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure pvc statistic including inputPackets,
inputBytes,inputPktErrors,outputPackets,outputBytes and outputPktErrors."
::= { hwAtmObjects 9 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1
hwAtmPvcStatisticEntry OBJECT-TYPE
SYNTAX HwAtmPvcStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure pvc statistic including inputPackets,
inputBytes,inputPktErrors,outputPackets,outputBytes and outputPktErrors."
INDEX { hwAtmPvcStatisticIfIndex, hwAtmPvcStatisticVpi, hwAtmPvcStatisticVci }
::= { hwAtmPvcStatisticTable 1 }
HwAtmPvcStatisticEntry ::=
SEQUENCE {
hwAtmPvcStatisticIfIndex
InterfaceIndex,
hwAtmPvcStatisticVpi
AtmVpIdentifier,
hwAtmPvcStatisticVci
AtmVcIdentifier,
hwAtmPvcStatisticInputPackets
Counter64,
hwAtmPvcStatisticInputBytes
Counter64,
hwAtmPvcStatisticInputPktErrors
Integer32,
hwAtmPvcStatisticInputCells
Counter64,
hwAtmPvcStatisticInputCellErrors
Integer32,
hwAtmPvcStatisticOutputPackets
Counter64,
hwAtmPvcStatisticOutputBytes
Counter64,
hwAtmPvcStatisticOutputPktErrors
Integer32,
hwAtmPvcStatisticOutputCells
Counter64,
hwAtmPvcStatisticOutputCellErrors
Integer32,
hwAtmPvcStatisticInputCellDrops
Counter64,
hwAtmPvcStatisticInputPktDrops
Counter64,
hwAtmPvcStatisticOutputCellDrops
Counter64,
hwAtmPvcStatisticOutputPktDrops
Counter64,
hwAtmPvcStatisticReset
INTEGER
}
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.1
hwAtmPvcStatisticIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the interface index."
::= { hwAtmPvcStatisticEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.2
hwAtmPvcStatisticVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the virtual path identifier (VPI) of ATM. The value is an integer.
For a UNI, the value ranges from 0 to 255.
For an NNI, the value ranges from 0 to 4095."
::= { hwAtmPvcStatisticEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.3
hwAtmPvcStatisticVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the virtual channel identifier (VCI) of ATM."
::= { hwAtmPvcStatisticEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.11
hwAtmPvcStatisticInputPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of received packets."
::= { hwAtmPvcStatisticEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.12
hwAtmPvcStatisticInputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of received bytes."
::= { hwAtmPvcStatisticEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.13
hwAtmPvcStatisticInputPktErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of received error packets."
::= { hwAtmPvcStatisticEntry 13 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.14
hwAtmPvcStatisticInputCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of received cells."
::= { hwAtmPvcStatisticEntry 14 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.15
hwAtmPvcStatisticInputCellErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of received error cells."
::= { hwAtmPvcStatisticEntry 15 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.16
hwAtmPvcStatisticOutputPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of sent packets."
::= { hwAtmPvcStatisticEntry 16 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.17
hwAtmPvcStatisticOutputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of sent bytes."
::= { hwAtmPvcStatisticEntry 17 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.18
hwAtmPvcStatisticOutputPktErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of sent error packets."
::= { hwAtmPvcStatisticEntry 18 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.19
hwAtmPvcStatisticOutputCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of sent cells."
::= { hwAtmPvcStatisticEntry 19 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.20
hwAtmPvcStatisticOutputCellErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of sent error cells."
::= { hwAtmPvcStatisticEntry 20 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.21
hwAtmPvcStatisticInputCellDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of discarded received cells."
::= { hwAtmPvcStatisticEntry 21 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.22
hwAtmPvcStatisticInputPktDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of discarded received packets."
::= { hwAtmPvcStatisticEntry 22 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.23
hwAtmPvcStatisticOutputCellDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of discarded sent cells."
::= { hwAtmPvcStatisticEntry 23 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.24
hwAtmPvcStatisticOutputPktDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of discarded sent packets."
::= { hwAtmPvcStatisticEntry 24 }
-- 1.3.6.1.4.1.2011.5.25.156.1.9.1.51
hwAtmPvcStatisticReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
ready(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates cleared statistics."
::= { hwAtmPvcStatisticEntry 51 }
hwAtmIfConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmIfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration of the ATM interface."
::= { hwAtmObjects 11 }
hwAtmIfConfEntry OBJECT-TYPE
SYNTAX HwAtmIfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration of the ATM interface."
INDEX { hwAtmIfConfIfIndex }
::= { hwAtmIfConfTable 1 }
HwAtmIfConfEntry ::=
SEQUENCE {
hwAtmIfConfIfIndex
InterfaceIndex,
hwAtmIfConfMaxVccs
Integer32,
hwAtmIfConfOperVccs
Integer32,
hwAtmIfConfIntfType
INTEGER,
hwAtmIfConfCellTransfer
TruthValue
}
hwAtmIfConfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmIfConfEntry 1 }
hwAtmIfConfMaxVccs OBJECT-TYPE
SYNTAX Integer32 (1..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum number of the PVCs. Only main-interfaces encapsulated
with ATM protocol can be set."
::= { hwAtmIfConfEntry 11 }
hwAtmIfConfOperVccs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of the configured PVCs."
::= { hwAtmIfConfEntry 12 }
hwAtmIfConfIntfType OBJECT-TYPE
SYNTAX INTEGER
{
uni(1),
nni(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of the serial interface with the ATM protocol.
Only main-interfaces encapsulated with ATM protocol can be set."
::= { hwAtmIfConfEntry 13 }
hwAtmIfConfCellTransfer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the cell transfer function is enabled.
By default, the cell transfer function is enabled on IMA sub-interfaces
and serial sub-interfaces and disabled on other types of interfaces.
This object can not be set on IMA sub-interfaces and serial sub-interface.
true: enables the cell transfer function.
false: disables the cell transfer function."
::= { hwAtmIfConfEntry 14 }
hwAtmVplTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmVplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration of the ATM PVP."
::= { hwAtmObjects 12 }
hwAtmVplEntry OBJECT-TYPE
SYNTAX HwAtmVplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration of the ATM PVP."
INDEX { hwAtmVplIfIndex, hwAtmVplVpi }
::= { hwAtmVplTable 1 }
HwAtmVplEntry ::=
SEQUENCE {
hwAtmVplIfIndex
InterfaceIndex,
hwAtmVplVpi
AtmVpIdentifier,
hwAtmVplRowStatus
RowStatus
}
hwAtmVplIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmVplEntry 1 }
hwAtmVplVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"VPI."
::= { hwAtmVplEntry 2 }
hwAtmVplRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of the row."
::= { hwAtmVplEntry 51 }
hwAtmVclTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmVclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration of the ATM PVC."
::= { hwAtmObjects 13 }
hwAtmVclEntry OBJECT-TYPE
SYNTAX HwAtmVclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration of the ATM PVC."
INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci }
::= { hwAtmVclTable 1 }
HwAtmVclEntry ::=
SEQUENCE {
hwAtmVclIfIndex
InterfaceIndex,
hwAtmVclVpi
AtmVpIdentifier,
hwAtmVclVci
AtmVcIdentifier,
hwAtmVclName
OCTET STRING,
hwAtmVccAal5EncapsType
INTEGER,
hwAtmVclRowStatus
RowStatus,
hwAtmVclDescr
OCTET STRING
}
hwAtmVclIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmVclEntry 1 }
hwAtmVclVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"VPI."
::= { hwAtmVclEntry 2 }
hwAtmVclVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"VCI."
::= { hwAtmVclEntry 3 }
hwAtmVclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name of the PVC."
::= { hwAtmVclEntry 11 }
hwAtmVccAal5EncapsType OBJECT-TYPE
SYNTAX INTEGER
{
aal5Snap(1),
aal5Mux(2),
aal5MuxNonstandard(3),
aal5Nlpid(4),
aal5NlpidIetf(5),
aal5Auto(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the encapsulation mode of AAL5.
aal5snap: LLC/SNAP (Logical Link Control (LLC)/Subnet Access Protocol (SNAP)) encapsulation type.
aal5mux: MUX encapsulation type.
aal5muxnonstandard: nonstandard MUX encapsulation type, which used to interconnect other devices.
aal5nlpid: RFC1490 encapsulation type.
aal5nlpidietf: RFC1490 encapsulation type, which used to differentiate with aal5nlpid for ISIS.
aal5Auto: Auto encapsulation type.
"
DEFVAL { aal5Snap }
::= { hwAtmVclEntry 12 }
hwAtmVclRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of the row."
::= { hwAtmVclEntry 51 }
hwAtmVclDescr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the Description of the PVC."
::= { hwAtmVclEntry 52 }
hwAtmPvcIpoaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcIpoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the IPoA mapping on the PVC."
::= { hwAtmObjects 14 }
hwAtmPvcIpoaEntry OBJECT-TYPE
SYNTAX HwAtmPvcIpoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the IPoA mapping on the PVC."
INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwAtmPvcIpoaType, hwAtmPvcIpoaIpAddress }
::= { hwAtmPvcIpoaTable 1 }
HwAtmPvcIpoaEntry ::=
SEQUENCE {
hwAtmPvcIpoaType
INTEGER,
hwAtmPvcIpoaIpAddress
IpAddress,
hwAtmPvcIpoaIpMask
IpAddress,
hwAtmPvcIpoaInarpInterval
Integer32,
hwAtmPvcIpoaBroadcast
TruthValue,
hwAtmPvcIpoaRowStatus
RowStatus
}
hwAtmPvcIpoaType OBJECT-TYPE
SYNTAX INTEGER
{
ip(1),
default(2),
inarp(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the type of the PVC IPoA mapping.
ip: sets the peer IP address and mask that are mapped to the PVC.
default: configures a mapping with default route attributes.
If no mapping of the next hop address of a packet can be found,
the packet is sent over the PVC if the PVC is configured with
default mapping.
inarp: configures InARP on the PVC."
::= { hwAtmPvcIpoaEntry 3 }
hwAtmPvcIpoaIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the peer IP address mapped to the PVC."
::= { hwAtmPvcIpoaEntry 4 }
hwAtmPvcIpoaIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the IP address mask. The IP address mask is an optional parameter."
::= { hwAtmPvcIpoaEntry 11 }
hwAtmPvcIpoaInarpInterval OBJECT-TYPE
SYNTAX Integer32 (0 | 1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the interval for sending InARP packets. The parameter is optional.
The value ranges from 1 to 600 in seconds. If the type of the PVC IPoA
mapping is IP or default, the value is 0. The default value is 1."
DEFVAL { 1 }
::= { hwAtmPvcIpoaEntry 12 }
hwAtmPvcIpoaBroadcast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If a mapping with this attribute is configured on the PVC,
broadcast packets on the interface where the PVC resides
will be sent over the PVC."
DEFVAL { false }
::= { hwAtmPvcIpoaEntry 13 }
hwAtmPvcIpoaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus."
::= { hwAtmPvcIpoaEntry 51 }
hwAtmPvcBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the
PVC."
::= { hwAtmObjects 15 }
hwAtmPvcBridgeEntry OBJECT-TYPE
SYNTAX HwAtmPvcBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the
PVC."
INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci }
::= { hwAtmPvcBridgeTable 1 }
HwAtmPvcBridgeEntry ::=
SEQUENCE {
hwAtmPvcBridgeDstIfIndex
InterfaceIndexOrZero,
hwAtmPvcBridgeBroadcast
TruthValue,
hwAtmPvcBridgeRowStatus
RowStatus
}
hwAtmPvcBridgeDstIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the index of the VE interface."
::= { hwAtmPvcBridgeEntry 11 }
hwAtmPvcBridgeBroadcast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the PVC can forward bridge packets."
DEFVAL { false }
::= { hwAtmPvcBridgeEntry 12 }
hwAtmPvcBridgeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus.
Only 'createAndGo' and 'destroy' is supported."
::= { hwAtmPvcBridgeEntry 51 }
hwAtmPvcOAMLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcOAMLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure OAM F5 Loopback,
enable the sending of OAM F5 Loopback cells,
and configure the parameters of the retransmission check
or modify the parameters of the retransmission check."
::= { hwAtmObjects 17 }
hwAtmPvcOAMLoopbackEntry OBJECT-TYPE
SYNTAX HwAtmPvcOAMLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure OAM F5 Loopback."
INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci }
::= { hwAtmPvcOAMLoopbackTable 1 }
HwAtmPvcOAMLoopbackEntry ::=
SEQUENCE {
hwAtmPvcOAMLoopbackFrequency
Integer32,
hwAtmPvcOAMLoopbackUpCount
Integer32,
hwAtmPvcOAMLoopbackDownCount
Integer32,
hwAtmPvcOAMLoopbackRetryFrequency
Integer32,
hwAtmPvcOAMLoopbackRowStatus
RowStatus
}
hwAtmPvcOAMLoopbackFrequency OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the interval for sending OAM F5 Loopback cells."
::= { hwAtmPvcOAMLoopbackEntry 11 }
hwAtmPvcOAMLoopbackUpCount OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the number of continuous OAM F5 Loopback cells that must be received
before the PVC turns Up."
DEFVAL { 3 }
::= { hwAtmPvcOAMLoopbackEntry 12 }
hwAtmPvcOAMLoopbackDownCount OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the number of continuous OAM F5 Loopback cells that are not received
before the PVC turns Down."
DEFVAL { 5 }
::= { hwAtmPvcOAMLoopbackEntry 13 }
hwAtmPvcOAMLoopbackRetryFrequency OBJECT-TYPE
SYNTAX Integer32 (1..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the interval for sending cells during OAM F5 Loopback retransmission
verification before the PVC status changes."
::= { hwAtmPvcOAMLoopbackEntry 14 }
hwAtmPvcOAMLoopbackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus"
::= { hwAtmPvcOAMLoopbackEntry 51 }
hwAtmPvpLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvpLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the VP limit. To monitor the VP, configure
related VP parameters."
::= { hwAtmObjects 18 }
hwAtmPvpLimitEntry OBJECT-TYPE
SYNTAX HwAtmPvpLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the VP limit."
INDEX { hwAtmPvpLimitIfIndex, hwAtmPvpLimitVpi }
::= { hwAtmPvpLimitTable 1 }
HwAtmPvpLimitEntry ::=
SEQUENCE {
hwAtmPvpLimitIfIndex
InterfaceIndex,
hwAtmPvpLimitVpi
AtmVpIdentifier,
hwAtmPvpLimitPeakRate
Integer32,
hwAtmPvpLimitRowStatus
RowStatus
}
hwAtmPvpLimitIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmPvpLimitEntry 1 }
hwAtmPvpLimitVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPI."
::= { hwAtmPvpLimitEntry 2 }
hwAtmPvpLimitPeakRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VCI."
::= { hwAtmPvpLimitEntry 11 }
hwAtmPvpLimitRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus. "
::= { hwAtmPvpLimitEntry 51 }
--
-- hwAtmPvcPppTable
--
hwAtmPvcPppTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcPppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the PPPoA mapping on the PVC."
::= { hwAtmObjects 16 }
hwAtmPvcPppEntry OBJECT-TYPE
SYNTAX HwAtmPvcPppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the PPPoA mapping on the PVC."
INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci }
::= { hwAtmPvcPppTable 1 }
HwAtmPvcPppEntry::=
SEQUENCE {
hwAtmPvcPppDstIfIndex
InterfaceIndex,
hwAtmPvcPppServer
TruthValue,
hwAtmPvcPppRowStatus
RowStatus
}
hwAtmPvcPppDstIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the index of the VT or dialer interface."
::= { hwAtmPvcPppEntry 11 }
hwAtmPvcPppServer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the node is server or not.
By default, the node is not server.
true: indicates the node is server.
false: indicates the node is not server.
"
DEFVAL { false }
::= { hwAtmPvcPppEntry 12 }
hwAtmPvcPppRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus.
Only 'createAndGo' and 'destroy' is supported."
::= { hwAtmPvcPppEntry 51 }
--
-- hwAtmPvcGroupTable
--
hwAtmPvcGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to create or delete the pvc-group, and get the TOS type or state of the pvc-group."
::= { hwAtmObjects 19 }
hwAtmPvcGroupEntry OBJECT-TYPE
SYNTAX HwAtmPvcGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to create or delete the pvc-group, and get the TOS type or state of the pvc-group."
INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci }
::= { hwAtmPvcGroupTable 1 }
HwAtmPvcGroupEntry::=
SEQUENCE {
hwAtmPvcGroupTosType
INTEGER,
hwAtmPvcGroupState
INTEGER,
hwAtmPvcGroupName
OCTET STRING,
hwAtmPvcGroupRowStatus
RowStatus
}
hwAtmPvcGroupTosType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
precedence(2),
dscp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the TOS type. The default value is 1."
::= { hwAtmPvcGroupEntry 1 }
hwAtmPvcGroupState OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the state of the pvc-group."
::= { hwAtmPvcGroupEntry 2 }
hwAtmPvcGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the pvc-group. Only support visible characters."
::= { hwAtmPvcGroupEntry 3 }
hwAtmPvcGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus.
Only 'createAndGo' and 'destroy' is supported.
"
::= { hwAtmPvcGroupEntry 51 }
--
-- hwAtmPvcGroupMemTable
--
hwAtmPvcGroupMemTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcGroupMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the member PVC and TOS type and TOS type value on the pvc-group."
::= { hwAtmObjects 20 }
hwAtmPvcGroupMemEntry OBJECT-TYPE
SYNTAX HwAtmPvcGroupMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the member PVC and TOS type and TOS type value on the pvc-group."
INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwAtmPvcGroupMemVpi, hwAtmPvcGroupMemVci }
::= { hwAtmPvcGroupMemTable 1 }
HwAtmPvcGroupMemEntry::=
SEQUENCE {
hwAtmPvcGroupMemVpi
Integer32,
hwAtmPvcGroupMemVci
Integer32,
hwAtmPvcGroupMemName
OCTET STRING,
hwAtmPvcGroupMemMinGrade
Integer32,
hwAtmPvcGroupMemMaxGrade
Integer32,
hwAtmPvcGroupMemDefault
TruthValue,
hwAtmPvcGroupMemTosType
INTEGER,
hwAtmPvcGroupMemRowStatus
RowStatus
}
hwAtmPvcGroupMemVpi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VPI of the member PVC in pvc-group."
::= { hwAtmPvcGroupMemEntry 1 }
hwAtmPvcGroupMemVci OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VCI of the member PVC in pvc-group."
::= { hwAtmPvcGroupMemEntry 2 }
hwAtmPvcGroupMemName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name of the member PVC of the pvc-group.
Only support visible characters."
::= { hwAtmPvcGroupMemEntry 3 }
hwAtmPvcGroupMemMinGrade OBJECT-TYPE
SYNTAX Integer32 (0..63 | 255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the minimum value of the TOS with one member PVC.
If the TOS type is precedence, the maximum value cannot be larger than 7.
Return 255 when this value is not configed."
::= { hwAtmPvcGroupMemEntry 4 }
hwAtmPvcGroupMemMaxGrade OBJECT-TYPE
SYNTAX Integer32 (0..63 | 255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum value of the TOS with one member PVC.
If the TOS type is precedence, the maximum value cannot be larger than 7.
Return 255 when this value is not configed."
::= { hwAtmPvcGroupMemEntry 5 }
hwAtmPvcGroupMemDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the PVC is default PVC or not.
By default, the default TOS is disabled.
true: with default. false: without default."
DEFVAL { false }
::= { hwAtmPvcGroupMemEntry 6 }
hwAtmPvcGroupMemTosType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
precedence(2),
dscp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the TOS type. The default value is 1."
::= { hwAtmPvcGroupMemEntry 7 }
hwAtmPvcGroupMemRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus.
Only 'createAndGo' and 'destroy' is supported.
"
::= { hwAtmPvcGroupMemEntry 51 }
-- hwAtmPvcDynamicTable
hwAtmPvcDynamicTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the auto PVC."
::= { hwAtmObjects 21 }
hwAtmPvcDynamicEntry OBJECT-TYPE
SYNTAX HwAtmPvcDynamicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the auto PVC."
INDEX { hwAtmPvcDynamicIfIndex,
hwAtmPvcDynamicStartVpi,
hwAtmPvcDynamicStartVci,
hwAtmPvcDynamicEndVpi,
hwAtmPvcDynamicEndVci }
::= { hwAtmPvcDynamicTable 1 }
HwAtmPvcDynamicEntry::=
SEQUENCE {
hwAtmPvcDynamicIfIndex
InterfaceIndex,
hwAtmPvcDynamicStartVpi
AtmVpIdentifier,
hwAtmPvcDynamicStartVci
AtmVcIdentifier,
hwAtmPvcDynamicEndVpi
AtmVpIdentifier,
hwAtmPvcDynamicEndVci
AtmVcIdentifier,
hwAtmPvcDynamicAdminStatus
INTEGER,
hwAtmPvcDynamicAal5EncapsType
INTEGER,
hwAtmPvcDynamicRowStatus
RowStatus
}
hwAtmPvcDynamicIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of ATM interface which support auto PVC."
::= { hwAtmPvcDynamicEntry 1 }
hwAtmPvcDynamicStartVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The start VPI of auto PVC."
::= { hwAtmPvcDynamicEntry 2 }
hwAtmPvcDynamicStartVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The start VCI of auto PVC."
::= { hwAtmPvcDynamicEntry 3 }
hwAtmPvcDynamicEndVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The end VPI of auto PVC."
::= { hwAtmPvcDynamicEntry 4 }
hwAtmPvcDynamicEndVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The end VCI of auto PVC."
::= { hwAtmPvcDynamicEntry 5 }
hwAtmPvcDynamicAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the administrative status of auto PVC."
DEFVAL { up }
::= { hwAtmPvcDynamicEntry 6 }
hwAtmPvcDynamicAal5EncapsType OBJECT-TYPE
SYNTAX INTEGER
{
aal5Snap(1),
aal5Mux(2),
aal5MuxNonstandard(3),
aal5Nlpid(4),
aal5NlpidIetf(5),
aal5Auto(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the encapsulation mode of AAL5.
aal5snap: LLC/SNAP (Logical Link Control (LLC)/Subnet Access Protocol (SNAP)) encapsulation type.
aal5mux: MUX encapsulation type.
aal5muxnonstandard: nonstandard MUX encapsulation type, which used to interconnect other devices.
aal5nlpid: RFC1490 encapsulation type.
aal5nlpidietf: RFC1490 encapsulation type, which used to differentiate with aal5nlpid for ISIS.
aal5Auto: Auto encapsulation type."
DEFVAL { aal5Snap }
::= { hwAtmPvcDynamicEntry 7 }
hwAtmPvcDynamicRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus.
Only 'createAndGo' and 'destroy' is supported.
"
::= { hwAtmPvcDynamicEntry 8 }
-- hwAtmPvcDynamicPppTable
hwAtmPvcDynamicPppTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcDynamicPppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the map PPP on auto PVC."
::= { hwAtmObjects 22 }
hwAtmPvcDynamicPppEntry OBJECT-TYPE
SYNTAX HwAtmPvcDynamicPppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the map PPP on auto PVC."
INDEX { hwAtmPvcDynamicIfIndex,
hwAtmPvcDynamicStartVpi,
hwAtmPvcDynamicStartVci,
hwAtmPvcDynamicEndVpi,
hwAtmPvcDynamicEndVci }
::= { hwAtmPvcDynamicPppTable 1 }
HwAtmPvcDynamicPppEntry::=
SEQUENCE {
hwAtmPvcDynamicPppDstIfIndex
InterfaceIndex,
hwAtmPvcDynamicPppRowStatus
RowStatus
}
hwAtmPvcDynamicPppDstIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the index of the VT interface."
::= { hwAtmPvcDynamicPppEntry 1 }
hwAtmPvcDynamicPppRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus.
Only 'createAndGo' and 'destroy' is supported.
"
::= { hwAtmPvcDynamicPppEntry 2 }
--hwAtmPvcDynamicBridgeTable
hwAtmPvcDynamicBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcDynamicBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the map bridge on auto PVC."
::= { hwAtmObjects 23 }
hwAtmPvcDynamicBridgeEntry OBJECT-TYPE
SYNTAX HwAtmPvcDynamicBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the map bridge on auto PVC."
INDEX { hwAtmPvcDynamicIfIndex,
hwAtmPvcDynamicStartVpi,
hwAtmPvcDynamicStartVci,
hwAtmPvcDynamicEndVpi,
hwAtmPvcDynamicEndVci }
::= { hwAtmPvcDynamicBridgeTable 1 }
HwAtmPvcDynamicBridgeEntry::=
SEQUENCE {
hwAtmPvcDynamicBridgeDstIfIndex
InterfaceIndex,
hwAtmPvcDynamicBridgeRowStatus
RowStatus
}
hwAtmPvcDynamicBridgeDstIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the index of the VE interface."
::= { hwAtmPvcDynamicBridgeEntry 1 }
hwAtmPvcDynamicBridgeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus.
Only 'createAndGo' and 'destroy' is supported."
::= { hwAtmPvcDynamicBridgeEntry 2 }
hwAtmTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the parameters of the atm trunk interface."
::= { hwAtmObjects 24 }
hwAtmTrunkEntry OBJECT-TYPE
SYNTAX HwAtmTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the parameters of the atm trunk interface."
INDEX { hwAtmTrunkIfIndex }
::= { hwAtmTrunkTable 1 }
HwAtmTrunkEntry ::=
SEQUENCE {
hwAtmTrunkIfIndex
InterfaceIndex,
hwAtmTrunkWorkMode
INTEGER
}
hwAtmTrunkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmTrunkEntry 1 }
hwAtmTrunkWorkMode OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the work mode of atm trunk."
DEFVAL { false }
::= { hwAtmTrunkEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.156.1.25
hwAtmVpcConnectivityTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmVpcConnectivityTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { hwAtmObjects 25 }
-- 1.3.6.1.4.1.2011.5.25.156.1.25.1
hwAtmVpcConnectivityTestEntry OBJECT-TYPE
SYNTAX HwAtmVpcConnectivityTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { hwAtmVpcConnectivityTestIfIndex, hwAtmVpcConnectivityTestVpi, hwAtmVpcConnectivityTestLLID }
::= { hwAtmVpcConnectivityTestTable 1 }
HwAtmVpcConnectivityTestEntry ::=
SEQUENCE {
hwAtmVpcConnectivityTestIfIndex
InterfaceIndex,
hwAtmVpcConnectivityTestVpi
AtmVpIdentifier,
hwAtmVpcConnectivityTestLLID
DisplayString,
hwAtmVpcConnectivityTestResult
Integer32,
hwAtmVpcConnectivityTestIfName
DisplayString,
hwAtmVpcConnectivityTestRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.25.156.1.25.1.1
hwAtmVpcConnectivityTestIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmVpcConnectivityTestEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.156.1.25.1.2
hwAtmVpcConnectivityTestVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"VPI."
::= { hwAtmVpcConnectivityTestEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.156.1.25.1.3
hwAtmVpcConnectivityTestLLID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Loopback Local Identify."
::= { hwAtmVpcConnectivityTestEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.156.1.25.1.4
hwAtmVpcConnectivityTestResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the result of the test."
::= { hwAtmVpcConnectivityTestEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.156.1.25.1.5
hwAtmVpcConnectivityTestIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the interface name."
::= { hwAtmVpcConnectivityTestEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.156.1.25.1.51
hwAtmVpcConnectivityTestRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of the row."
::= { hwAtmVpcConnectivityTestEntry 51 }
-- 1.3.6.1.4.1.2011.5.25.156.1.26
hwAtmVccConnectivityTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmVccConnectivityTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { hwAtmObjects 26 }
-- 1.3.6.1.4.1.2011.5.25.156.1.26.1
hwAtmVccConnectivityTestEntry OBJECT-TYPE
SYNTAX HwAtmVccConnectivityTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { hwAtmVccConnectivityTestIfIndex, hwAtmVccConnectivityTestVpi, hwAtmVccConnectivityTestVci, hwAtmVccConnectivityTestLLID }
::= { hwAtmVccConnectivityTestTable 1 }
HwAtmVccConnectivityTestEntry ::=
SEQUENCE {
hwAtmVccConnectivityTestIfIndex
InterfaceIndex,
hwAtmVccConnectivityTestVpi
AtmVpIdentifier,
hwAtmVccConnectivityTestVci
AtmVcIdentifier,
hwAtmVccConnectivityTestLLID
DisplayString,
hwAtmVccConnectivityTestResult
Integer32,
hwAtmVccConnectivityTestIfName
DisplayString,
hwAtmVccConnectivityTestRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.25.156.1.26.1.1
hwAtmVccConnectivityTestIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the interface index."
::= { hwAtmVccConnectivityTestEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.156.1.26.1.2
hwAtmVccConnectivityTestVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"VPI."
::= { hwAtmVccConnectivityTestEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.156.1.26.1.3
hwAtmVccConnectivityTestVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"VCI."
::= { hwAtmVccConnectivityTestEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.156.1.26.1.4
hwAtmVccConnectivityTestLLID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Loopback Local Identify."
::= { hwAtmVccConnectivityTestEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.156.1.26.1.5
hwAtmVccConnectivityTestResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the result of the test."
::= { hwAtmVccConnectivityTestEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.156.1.26.1.6
hwAtmVccConnectivityTestIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the interface name."
::= { hwAtmVccConnectivityTestEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.156.1.26.1.51
hwAtmVccConnectivityTestRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of the row."
::= { hwAtmVccConnectivityTestEntry 51 }
-- hwAtmPvcQueueStatisticTable
-- 1.3.6.1.4.1.2011.5.25.156.1.27
hwAtmPvcQueueStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAtmPvcQueueStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure pvc-queue statistic including outputPackets,
outputBytes and outputDropPackets."
::= { hwAtmObjects 27 }
-- 1.3.6.1.4.1.2011.5.25.156.1.27.1
hwAtmPvcQueueStatisticEntry OBJECT-TYPE
SYNTAX HwAtmPvcQueueStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure pvc-queue statistic including outputPackets,
outputBytes and outputDropPackets."
INDEX { hwAtmPvcQueueStatisticIfIndex,
hwAtmPvcQueueStatisticVpi,
hwAtmPvcQueueStatisticVci,
hwAtmPvcQueueStatisticQueueIndex }
::= { hwAtmPvcQueueStatisticTable 1 }
HwAtmPvcQueueStatisticEntry ::=
SEQUENCE {
hwAtmPvcQueueStatisticIfIndex
InterfaceIndex,
hwAtmPvcQueueStatisticVpi
AtmVpIdentifier,
hwAtmPvcQueueStatisticVci
AtmVcIdentifier,
hwAtmPvcQueueStatisticQueueIndex
INTEGER,
hwAtmPvcQueueStatisticReset
INTEGER,
hwAtmPvcQueueStatisticTxPks
Counter64,
hwAtmPvcQueueStatisticTxBytes
Counter64,
hwAtmPvcQueueStatisticTxDropPks
Counter64
}
-- 1.3.6.1.4.1.2011.5.25.156.1.27.1.1
hwAtmPvcQueueStatisticIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the interface index."
::= { hwAtmPvcQueueStatisticEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.156.1.27.1.2
hwAtmPvcQueueStatisticVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the virtual path identifier (VPI) of ATM. The value is an integer.
For a UNI, the value ranges from 0 to 255.
For an NNI, the value ranges from 0 to 4095."
::= { hwAtmPvcQueueStatisticEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.156.1.27.1.3
hwAtmPvcQueueStatisticVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the virtual channel identifier (VCI) of ATM."
::= { hwAtmPvcQueueStatisticEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.156.1.27.1.4
hwAtmPvcQueueStatisticQueueIndex OBJECT-TYPE
SYNTAX INTEGER
{
be(1),
af1(2),
af2(3),
af3(4),
af4(5),
ef(6),
cs6(7),
cs7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object indicates the queue priority."
::= { hwAtmPvcQueueStatisticEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.156.1.27.1.5
hwAtmPvcQueueStatisticReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
ready(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates cleared statistics."
::= { hwAtmPvcQueueStatisticEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.156.1.27.1.6
hwAtmPvcQueueStatisticTxPks OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of sent packets."
::= { hwAtmPvcQueueStatisticEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.156.1.27.1.7
hwAtmPvcQueueStatisticTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of sent bytes."
::= { hwAtmPvcQueueStatisticEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.156.1.27.1.8
hwAtmPvcQueueStatisticTxDropPks OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of discarded sent packets."
::= { hwAtmPvcQueueStatisticEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.156.2
hwAtmNotification OBJECT IDENTIFIER ::= { hwAtmMIB 2 }
-- 1.3.6.1.4.1.2011.5.25.156.2.1
hwVplTrap OBJECT IDENTIFIER ::= { hwAtmNotification 1 }
-- 1.3.6.1.4.1.2011.5.25.156.2.1.1
hwAtmVpcConnectivityTestResultNotify NOTIFICATION-TYPE
OBJECTS { hwAtmVpcConnectivityTestIfIndex, hwAtmVpcConnectivityTestVpi, hwAtmVpcConnectivityTestLLID, hwAtmVpcConnectivityTestResult, hwAtmVpcConnectivityTestIfName
}
STATUS current
DESCRIPTION
"This object indicates that the connectivity test on ATM VPC services is ended."
::= { hwVplTrap 1 }
-- 1.3.6.1.4.1.2011.5.25.156.2.2
hwVclTrap OBJECT IDENTIFIER ::= { hwAtmNotification 2 }
-- 1.3.6.1.4.1.2011.5.25.156.2.2.1
hwAtmVccConnectivityTestResultNotify NOTIFICATION-TYPE
OBJECTS { hwAtmVccConnectivityTestIfIndex, hwAtmVccConnectivityTestVpi, hwAtmVccConnectivityTestVci, hwAtmVccConnectivityTestLLID, hwAtmVccConnectivityTestResult,
hwAtmVccConnectivityTestIfName }
STATUS current
DESCRIPTION
"This object indicates that the connectivity test on ATM VCC services is ended."
::= { hwVclTrap 1 }
hwAtmConformance OBJECT IDENTIFIER ::= { hwAtmMIB 11 }
hwAtmCompliances OBJECT IDENTIFIER ::= { hwAtmConformance 1 }
hwAtmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting
the HUAWEI-ATM-MIB."
MODULE
MANDATORY-GROUPS { hwAtmObjectGroup, hwAtmMapPvpObjectGroup,
hwAtmMapPvcObjectGroup, hwAtmPvcIpoaObjectGroup, hwAtmPvcBridgeObjectGroup,
hwAtmPvcServiceObjectGroup, hwAtmPvcOAMLoopbackObjectGroup,
hwAtmPvpLimitObjectGroup, hwAtmPvcDynamicObjectGroup,
hwAtmPvcDynamicPppObjectGroup, hwAtmPvcDynamicBridgeObjectGroup }
::= { hwAtmCompliances 1 }
hwAtmGroups OBJECT IDENTIFIER ::= { hwAtmConformance 2 }
hwAtmObjectGroup OBJECT-GROUP
OBJECTS { hwAtmIfType, hwAtmClock, hwAtmFrameFormat, hwAtmScramble, hwAtmLoopback,
hwAtmPitp, hwAtmFlagJ0Mode, hwAtmFlagJ0Value, hwAtmFlagJ0Trace, hwAtmFlagJ1Mode,
hwAtmFlagJ1Value, hwAtmFlagJ1Trace, hwAtmFlagC2Value }
STATUS current
DESCRIPTION
"The Atm attribute group."
::= { hwAtmGroups 1 }
hwAtmIfConf OBJECT-GROUP
OBJECTS {
hwAtmIfConfMaxVccs,
hwAtmIfConfOperVccs,
hwAtmIfConfIntfType,
hwAtmIfConfCellTransfer
}
STATUS current
DESCRIPTION
"Description."
::= { hwAtmGroups 2 }
hwAtmVplObjectGroup OBJECT-GROUP
OBJECTS { hwAtmPvcBridgeDstIfIndex, hwAtmPvcBridgeRowStatus, hwAtmPvcPppDstIfIndex, hwAtmPvcPppRowStatus }
STATUS current
DESCRIPTION
"The ATM PVC bridge attribute group."
::= { hwAtmGroups 3 }
hwAtmVclObjectGroup OBJECT-GROUP
OBJECTS { hwAtmVclName, hwAtmVccAal5EncapsType, hwAtmVclRowStatus, hwAtmVclDescr }
STATUS current
DESCRIPTION
"Description."
::= { hwAtmGroups 4 }
hwAtmMapPvpObjectGroup OBJECT-GROUP
OBJECTS { hwAtmMapPvpRemoteVplVpi, hwAtmMapPvpBi, hwAtmMapPvpRowStatus }
STATUS current
DESCRIPTION
"The ATM map PVP attribute group."
::= { hwAtmGroups 5 }
hwAtmMapPvcObjectGroup OBJECT-GROUP
OBJECTS { hwAtmMapPvcRemoteVclVpi, hwAtmMapPvcRemoteVclVci, hwAtmMapPvcBi, hwAtmMapPvcRowStatus }
STATUS current
DESCRIPTION
"The ATM map PVC attribute group."
::= { hwAtmGroups 6 }
hwAtmServiceObjectGroup OBJECT-GROUP
OBJECTS {
hwAtmServiceType,
hwAtmServiceOutputPcr,
hwAtmServiceOutputScr,
hwAtmServiceOutputMbs,
hwAtmServiceCbrCdvtValue,
hwAtmServiceOutputMcr,
hwAtmServiceRowStatus
}
STATUS current
DESCRIPTION
"The ATM service attribute group."
::= { hwAtmGroups 7 }
hwAtmPvcServiceObjectGroup OBJECT-GROUP
OBJECTS { hwAtmPvcServiceName, hwAtmPvcTransmittalDirection, hwAtmPvcServiceRowStatus }
STATUS current
DESCRIPTION
"The ATM PVC service attribute group."
::= { hwAtmGroups 8 }
hwAtmPvcIpoaObjectGroup OBJECT-GROUP
OBJECTS { hwAtmPvcIpoaIpMask, hwAtmPvcIpoaInarpInterval, hwAtmPvcIpoaBroadcast, hwAtmPvcIpoaRowStatus }
STATUS current
DESCRIPTION
"The ATM PVC IPOA attribute group."
::= { hwAtmGroups 9 }
hwAtmPvcBridgeObjectGroup OBJECT-GROUP
OBJECTS { hwAtmVplRowStatus }
STATUS current
DESCRIPTION
"The ATM Pvl attribute group."
::= { hwAtmGroups 10 }
hwAtmPvcOAMLoopbackObjectGroup OBJECT-GROUP
OBJECTS {
hwAtmPvcOAMLoopbackFrequency,
hwAtmPvcOAMLoopbackUpCount,
hwAtmPvcOAMLoopbackDownCount,
hwAtmPvcOAMLoopbackRetryFrequency,
hwAtmPvcOAMLoopbackRowStatus
}
STATUS current
DESCRIPTION
"The port attribute group."
::= { hwAtmGroups 11 }
hwAtmPvpLimitObjectGroup OBJECT-GROUP
OBJECTS { hwAtmPvpLimitPeakRate, hwAtmPvpLimitRowStatus }
STATUS current
DESCRIPTION
"The port attribute group."
::= { hwAtmGroups 12 }
hwAtmPvcDynamicObjectGroup OBJECT-GROUP
OBJECTS {
hwAtmPvcDynamicAdminStatus,
hwAtmPvcDynamicAal5EncapsType,
hwAtmPvcDynamicRowStatus
}
STATUS current
DESCRIPTION
"The ATM any other PVC attribute group."
::= { hwAtmGroups 13 }
hwAtmPvcDynamicPppObjectGroup OBJECT-GROUP
OBJECTS {
hwAtmPvcDynamicPppDstIfIndex,
hwAtmPvcDynamicPppRowStatus
}
STATUS current
DESCRIPTION
"The ATM any other map PPP attribute group."
::= { hwAtmGroups 14 }
hwAtmPvcDynamicBridgeObjectGroup OBJECT-GROUP
OBJECTS {
hwAtmPvcDynamicBridgeDstIfIndex,
hwAtmPvcDynamicBridgeRowStatus
}
STATUS current
DESCRIPTION
"The ATM any other map bridge attribute group."
::= { hwAtmGroups 15 }
hwAtmVpcVccConnectivityTestTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwAtmVpcConnectivityTestResultNotify, hwAtmVccConnectivityTestResultNotify }
STATUS current
DESCRIPTION
"Description."
::= { hwAtmGroups 16 }
hwAtmVpVcTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwVpAis, hwVpAisResume,
hwVpRdi, hwVpRdiResume,
hwVcAis, hwVcAisResume,
hwVcRdi, hwVcRdiResume,
hwVpLoc, hwVpLocResume,
hwVcLoc, hwVcLocResume,
hwNoAtmResourceAlarmTrap
}
STATUS current
DESCRIPTION
"Description."
::= { hwAtmGroups 17 }
hwAtmAlarmObjectGroup OBJECT-GROUP
OBJECTS { hwOamAlmDirection
}
STATUS current
DESCRIPTION
"Description."
::= { hwAtmGroups 18 }
hwAtmTraps OBJECT IDENTIFIER ::= { hwAtmMIB 12 }
hwVpAis NOTIFICATION-TYPE
OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The AIS alarm of the VP is found."
::= { hwAtmTraps 1 }
hwVpAisResume NOTIFICATION-TYPE
OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The AIS alarm of the VP is cancelled."
::= { hwAtmTraps 2 }
hwVpRdi NOTIFICATION-TYPE
OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The RDI alarm of the VP is found."
::= { hwAtmTraps 3 }
hwVpRdiResume NOTIFICATION-TYPE
OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The RDI alarm of the VP is cancelled."
::= { hwAtmTraps 4 }
hwVcAis NOTIFICATION-TYPE
OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The AIS alarm of the VC is found."
::= { hwAtmTraps 5 }
hwVcAisResume NOTIFICATION-TYPE
OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The AIS alarm of the VC is cancelled."
::= { hwAtmTraps 6 }
hwVcRdi NOTIFICATION-TYPE
OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The RDI alarm of the VC is found."
::= { hwAtmTraps 7 }
hwVcRdiResume NOTIFICATION-TYPE
OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The RDI alarm of the VC is cancelled."
::= { hwAtmTraps 8 }
hwVpLoc NOTIFICATION-TYPE
OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The CC-LOC alarm of the VP is found."
::= { hwAtmTraps 9 }
hwVpLocResume NOTIFICATION-TYPE
OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The CC-LOC alarm of the VP is cancelled."
::= { hwAtmTraps 10 }
hwVcLoc NOTIFICATION-TYPE
OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The CC-LOC alarm of the VC is found."
::= { hwAtmTraps 11 }
hwVcLocResume NOTIFICATION-TYPE
OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName }
STATUS current
DESCRIPTION
"The CC-LOC alarm of the VC is cancelled."
::= { hwAtmTraps 12 }
hwNoAtmResourceAlarmTrap NOTIFICATION-TYPE
OBJECTS {
hwFrameIndex,
hwSlotIndex,
hwPortIndex
}
STATUS current
DESCRIPTION
"When ATM resources of the system are insufficient, this trap will be generated."
::= { hwAtmTraps 13 }
hwOamAlmDirection OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The direction of alarm such as ais, rdi, cc-loc, the value of directon is forward or backward."
::= { hwAtmMIB 13 }
END
--
-- HUAWEI-ATM-MIB.mib
--
View Git Blame Copy Permalink