WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HUAWEI-AR-SERIAL-CONNECT-MIB

859 lines
23 KiB
Plaintext
Raw Blame History

--
-- HUAWEI-AR-SERIAL-CONNECT-MIB.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 4.0 Build 341
-- Tuesday, December 09, 2014 at 16:31:27
--
-- ==================================================================
-- Copyright (C) 2018 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: This MIB module defines MIB objects of hwGpioTable, hwTransportSessionTable, hwTransSessionOperateTable,
-- hwSocketTransTable, hwModbusTransTable and hwGpioTraps.
-- Reference:
-- Version: V1.02
-- History:
-- V1.0 2007-10-21 publish
-- ==================================================================
HUAWEI-AR-SERIAL-CONNECT-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DateAndTime, RowStatus
FROM SNMPv2-TC;
-- FROM SNMPv2-SMI;
-- DisplayString,TruthValue,RowStatus
-- FROM SNMPv2-TC;
-- EnabledStatus
-- 1.3.6.1.4.1.2011.5.25.338
-- November 21, 2014 at 11:39 GMT
-- 1.3.6.1.4.1.2011.5.25.338
hwARSerialConnectMIB MODULE-IDENTITY
LAST-UPDATED "201804131139Z" -- April 13, 2018 at 11:39 GMT
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"The private mib file includes the general extent
information of the device.hwDatacomm(338).hwARSerialConnectMIB"
REVISION "201804131139Z"
DESCRIPTION "V1.02, Add trap node hwGpioDIFailure hwGpioDIRecovery"
REVISION "201411211139Z"
DESCRIPTION
"Create hwARSerialConnectMIB at 2014-11-21"
::= { hwDatacomm 338 }
--
-- Node definitions
--
-- Node definitions
--
-- 1.3.6.1.4.1.2011.5.25.338.1
hwARSerialConnectMIBObjects OBJECT IDENTIFIER ::= { hwARSerialConnectMIB 1 }
-- hwGpioTable Table
--
-- 1.3.6.1.4.1.2011.5.25.338.1.1
hwGpioTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwGpioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the functions of GPIO port.
This table lists the base setting information of GPIO port to realize the function of DI/DO."
::= { hwARSerialConnectMIBObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.338.1.1.1
hwGpioEntry OBJECT-TYPE
SYNTAX HwGpioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the functions of GPIO port.
This table lists the base setting information of GPIO port to realize the function of DI/DO."
INDEX { hwGpioId }
::= { hwGpioTable 1 }
HwGpioEntry ::=
SEQUENCE {
hwGpioId
Integer32,
hwGpioMode
INTEGER,
hwGpioDOLevel
INTEGER,
hwGpioDIState
INTEGER,
hwGpioDODefaultLevel
INTEGER,
hwGpioDIFailReason
INTEGER
}
-- 1.3.6.1.4.1.2011.5.25.338.1.1.1.1
hwGpioId OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current used GPIO id on the device ."
::= { hwGpioEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.338.1.1.1.2
hwGpioMode OBJECT-TYPE
SYNTAX INTEGER
{
di(0),
do(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the GPIO work mode,the default value is di."
DEFVAL { di }
::= { hwGpioEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.338.1.1.1.3
hwGpioDOLevel OBJECT-TYPE
SYNTAX INTEGER
{
low(0),
high(1),
null(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the current level of DO mode.When the current GPIOID is in DI mode,the value is null."
DEFVAL { null }
::= { hwGpioEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.338.1.1.1.4
hwGpioDIState OBJECT-TYPE
SYNTAX INTEGER
{
low(0),
high(1),
null(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current state of DI mode.When the current GPIOID is in DO mode,the value is null."
DEFVAL { null }
::= { hwGpioEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.338.1.1.1.5
hwGpioDODefaultLevel OBJECT-TYPE
SYNTAX INTEGER
{
low(0),
high(1),
null(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the default state of DO mode.When the current GPIOID is in DI mode,the value is null."
DEFVAL { high }
::= { hwGpioEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.338.1.1.1.6
hwGpioDIFailReason OBJECT-TYPE
SYNTAX INTEGER
{
null(0),
acfailure(1),
batterylow(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the default FailReason of DI."
DEFVAL { high }
::= { hwGpioEntry 6 }
-- hwTransportSessionTable Table
--
-- 1.3.6.1.4.1.2011.5.25.338.1.2
hwTransportSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTransportSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the business of serial transportation.This table lists the session information of the serial."
::= { hwARSerialConnectMIBObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1
hwTransportSessionEntry OBJECT-TYPE
SYNTAX HwTransportSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the business of serial transportation.
This table lists the session information of the remote serial."
INDEX { hwTtyId }
::= { hwTransportSessionTable 1 }
HwTransportSessionEntry ::=
SEQUENCE {
hwTtyId
Integer32,
hwTransportMode
INTEGER,
hwTransportRemoteIP
IpAddress,
hwTransportRemotePort
Integer32,
hwConnectDuration
OCTET STRING,
hwBytesReceived
Integer32,
hwBytesSend
Integer32,
hwConnectionNum
Integer32,
hwRefuseConnectionNum
Integer32,
hwMsgStatics
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.1
hwTtyId OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inicates the current tty index ."
::= { hwTransportSessionEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.2
hwTransportMode OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
raw(1),
t101(2),
modbus(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the current used mode of transparent.During mode switching,
if the current communication parameter configuration is not the default configuration ,the mode switching is not allowed."
::= { hwTransportSessionEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.3
hwTransportRemoteIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remote IP."
::= { hwTransportSessionEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.4
hwTransportRemotePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remote port."
::= { hwTransportSessionEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.5
hwConnectDuration OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time when the connection begins."
::= { hwTransportSessionEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.6
hwBytesReceived OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Statistics the number of packets received on current connection."
::= { hwTransportSessionEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.7
hwBytesSend OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Statistics the number of packets sent on current connection."
::= { hwTransportSessionEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.8
hwConnectionNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Statistics the number of connection on current serial."
::= { hwTransportSessionEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.9
hwRefuseConnectionNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Statistics the number of refuseing connection on current serial."
::= { hwTransportSessionEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.338.1.2.1.10
hwMsgStatics OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Statistics the number of transmitted and received packets on current connection."
::= { hwTransportSessionEntry 10 }
-- hwTransSessionOperateTable Table
--
-- 1.3.6.1.4.1.2011.5.25.338.1.3
hwTransSessionOperateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTransSessionOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the business of serial transportation.
This table lists the session information of the serial."
::= { hwARSerialConnectMIBObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.338.1.3.1
hwTransSessionOperateEntry OBJECT-TYPE
SYNTAX HwTransSessionOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the business of serial transportation.
This table lists the session information of the remote serial."
INDEX { hwTtyId, hwSessionIndex }
::= { hwTransSessionOperateTable 1 }
HwTransSessionOperateEntry ::=
SEQUENCE {
hwSessionIndex
Integer32,
hwTransSessionSessionID
Integer32,
hwTransSessionRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.25.338.1.3.1.1
hwSessionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inicates the connection session id ."
::= { hwTransSessionOperateEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.338.1.3.1.2
hwTransSessionSessionID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the current used connection session id."
::= { hwTransSessionOperateEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.338.1.3.1.3
hwTransSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This project used to create and delete a connection."
::= { hwTransSessionOperateEntry 3 }
-- hwSocketTransTable Table
--
-- 1.3.6.1.4.1.2011.5.25.338.1.4
hwSocketTransTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSocketTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the socket information.
This table lists the base communication of tcp/udp on serial socket."
::= { hwARSerialConnectMIBObjects 4 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1
hwSocketTransEntry OBJECT-TYPE
SYNTAX HwSocketTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the socket information.
This table lists the base communication of tcp/udp on serial socket."
INDEX { hwTtyId }
::= { hwSocketTransTable 1 }
HwSocketTransEntry ::=
SEQUENCE {
hwSocketTransEnable
INTEGER,
hwSocketTransType
INTEGER,
hwSocketTransPacketSize
Integer32,
hwSocketTransPacketTime
Integer32,
hwSocketTransSpecialChar
Integer32,
hwSocketTransClientIP
IpAddress,
hwSocketTransClientPort
Integer32,
hwSocketTransServerIP
IpAddress,
hwSocketTransServerPort
Integer32,
hwSocketTransTcpIdleTimeout
Integer32,
hwSocketTransBestEffort
INTEGER,
hwRawModeSocketTransEnable
INTEGER
}
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.1
hwSocketTransEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When current TTY ID is 1,this object used to switch the serial back and forth from management serial to bussiness serial.
TTY 2 is a bussiness serial,no need to switch."
DEFVAL { disable }
::= { hwSocketTransEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.2
hwSocketTransType OBJECT-TYPE
SYNTAX INTEGER
{
tcpServer(0),
tcpClient(1),
udp(2),
null(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to set or get the type used to transport.The default value is null(3),
meaning current serial is not configured for any operating mode."
::= { hwSocketTransEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.3
hwSocketTransPacketSize OBJECT-TYPE
SYNTAX Integer32 (0..1400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to set or get max size of trans packets.The setting range is 16 - 1400.0 is default value."
::= { hwSocketTransEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.4
hwSocketTransPacketTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet encapsulation timer,the default value is 100ms,parameter units is ms."
DEFVAL { 100 }
::= { hwSocketTransEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.5
hwSocketTransSpecialChar OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the byte of special characters used to specifie a packet end."
::= { hwSocketTransEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.6
hwSocketTransClientIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the client IP when the serial is worked in tcp server,
this project can also be the client local IP when the serial is worked in tcp client or udp client."
::= { hwSocketTransEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.7
hwSocketTransClientPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the client port when the serial is worked in tcp server,
this project can also be the client local port when the serial is worked in tcp client or udp client."
::= { hwSocketTransEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.8
hwSocketTransServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the local server ip when the serial is worked in tcp server,
this project can also be the server ip when the serial is worked in tcp client or udp client."
::= { hwSocketTransEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.9
hwSocketTransServerPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the local listening server port when the serial is worked in tcp server,
this project can also be the server port when the serial is worked in tcp client or udp client"
::= { hwSocketTransEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.10
hwSocketTransTcpIdleTimeout OBJECT-TYPE
SYNTAX Integer32 (0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interval time of the tcp link keep alive."
::= { hwSocketTransEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.338.1.4.1.11
hwSocketTransBestEffort OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When configuring a best effort mode, discarding older data cache first, otherwise discard newer data buffer."
::= { hwSocketTransEntry 11 }
hwRawModeSocketTransEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable or disable the transport business on serial.When the transport business is enable,do not allowed to set socket param."
DEFVAL { disable }
::= { hwSocketTransEntry 12 }
-- hwModbusTransTable Table
--
-- 1.3.6.1.4.1.2011.5.25.338.1.5
hwModbusTransTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwModbusTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the attribute of the conntection info of modbus.
This table lists the connection info of the modbus interface."
::= { hwARSerialConnectMIBObjects 5 }
-- 1.3.6.1.4.1.2011.5.25.338.1.5.1
hwModbusTransEntry OBJECT-TYPE
SYNTAX HwModbusTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the attribute of the conntection info of modbus.
This table lists the connection info of the modbus interface."
INDEX { hwTtyId }
::= { hwModbusTransTable 1 }
HwModbusTransEntry ::=
SEQUENCE {
hwModbusTransEnable
INTEGER,
hwModbusTransServerIP
IpAddress,
hwModbusTransServerPort
Integer32,
hwModbusTransServerDestIP
IpAddress,
hwModbusTransServerDestPort
Integer32,
hwModbusTransServerFrameBufNum
Integer32,
hwModbusTransServerClientNum
Integer32,
hwModbusTransSerialTimeout
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.338.1.5.1.1
hwModbusTransEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object used to enable/disable the modbus transport."
::= { hwModbusTransEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.338.1.5.1.2
hwModbusTransServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Server IP of Modbus Transportation,the device as a server."
::= { hwModbusTransEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.338.1.5.1.3
hwModbusTransServerPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Server Port of Modbus Transportation,the device as a server.
Modbus used port is 502 + hwModbusTransServerPort."
::= { hwModbusTransEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.338.1.5.1.4
hwModbusTransServerDestIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the remote ip addr,only this ip can connect to the modbus server."
::= { hwModbusTransEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.338.1.5.1.5
hwModbusTransServerDestPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the remote port,only this port can connect to the modbus server."
::= { hwModbusTransEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.338.1.5.1.6
hwModbusTransServerFrameBufNum OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the size of cache packets,the default value is 3."
DEFVAL { 3 }
::= { hwModbusTransEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.338.1.5.1.7
hwModbusTransServerClientNum OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of customers which allow to acess the server at the same time,
the default value is 1."
DEFVAL { 1 }
::= { hwModbusTransEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.338.1.5.1.8
hwModbusTransSerialTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the waitting time ,after the master send a message to the modbus slave."
DEFVAL { 1 }
::= { hwModbusTransEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.338.2
hwARSerialConnectMIBNotifications OBJECT IDENTIFIER ::= { hwARSerialConnectMIB 2 }
-- 1.3.6.1.4.1.2011.5.25.338.2.1
hwGpioTraps OBJECT IDENTIFIER ::= { hwARSerialConnectMIBNotifications 1 }
-- 1.3.6.1.4.1.2011.5.25.338.2.1.1
hwGpioDILevelChange NOTIFICATION-TYPE
OBJECTS { hwGpioId, hwGpioDIState }
STATUS current
DESCRIPTION
"The notification indicates that the current DI level has changed."
::= { hwGpioTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.338.2.1.2
hwGpioDIFailure NOTIFICATION-TYPE
OBJECTS { hwGpioId, hwGpioDIState, hwGpioDIFailReason }
STATUS current
DESCRIPTION
"The GPIO DI state change fail reason."
::= { hwGpioTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.338.2.1.3
hwGpioDIRecovery NOTIFICATION-TYPE
OBJECTS { hwGpioId, hwGpioDIState, hwGpioDIFailReason }
STATUS current
DESCRIPTION
"The GPIO DI state recovery."
::= { hwGpioTraps 3 }
-- ============== conformance information ==============
-- 1.3.6.1.4.1.2011.5.25.338.3
hwARSerialConnectConformance OBJECT IDENTIFIER ::= { hwARSerialConnectMIB 3 }
-- 1.3.6.1.4.1.2011.5.25.338.3.1
hwSerialConnectCompliances OBJECT IDENTIFIER ::= { hwARSerialConnectConformance 1 }
-- this module
-- 1.3.6.1.4.1.2011.5.25.338.3.1.1
hwSerialConnectCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting
the this module."
MODULE HUAWEI-AR-SERIAL-CONNECT-MIB
MANDATORY-GROUPS { hwGpioGroup, hwTransportSesionGroup, hwSocketTransGroup, hwGpioTrapsGroup,
hwTransSessionOperateGroup, hwModbusTransGroup}
::= { hwSerialConnectCompliances 1 }
-- ============== groups ==============
-- 1.3.6.1.4.1.2011.5.25.338.3.2
hwSerialConnectGroups OBJECT IDENTIFIER ::= { hwARSerialConnectConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.338.3.2.1
hwGpioGroup OBJECT-GROUP
OBJECTS { hwGpioId, hwGpioMode, hwGpioDOLevel, hwGpioDIState, hwGpioDODefaultLevel
}
STATUS current
DESCRIPTION
"The GPIO group."
::= { hwSerialConnectGroups 1 }
-- 1.3.6.1.4.1.2011.5.25.338.3.2.2
hwTransportSesionGroup OBJECT-GROUP
OBJECTS { hwTtyId, hwTransportMode, hwTransportRemoteIP, hwTransportRemotePort, hwConnectDuration, hwBytesReceived,
hwBytesSend, hwConnectionNum, hwRefuseConnectionNum, hwMsgStatics
}
STATUS current
DESCRIPTION
"The TransportSesion group."
::= { hwSerialConnectGroups 2 }
-- 1.3.6.1.4.1.2011.5.25.338.3.2.3
hwTransSessionOperateGroup OBJECT-GROUP
OBJECTS { hwTransSessionSessionID, hwTransSessionRowStatus, hwSessionIndex }
STATUS current
DESCRIPTION
"The TransportStatics group."
::= { hwSerialConnectGroups 3 }
-- 1.3.6.1.4.1.2011.5.25.338.3.2.4
hwSocketTransGroup OBJECT-GROUP
OBJECTS { hwSocketTransEnable, hwSocketTransType, hwSocketTransPacketSize, hwSocketTransPacketTime, hwSocketTransSpecialChar,
hwSocketTransBestEffort, hwSocketTransTcpIdleTimeout, hwSocketTransClientIP,
hwSocketTransClientPort, hwSocketTransServerIP, hwSocketTransServerPort,hwRawModeSocketTransEnable }
STATUS current
DESCRIPTION
"The SocketTrans group."
::= { hwSerialConnectGroups 4 }
-- 1.3.6.1.4.1.2011.5.25.338.3.2.5
hwModbusTransGroup OBJECT-GROUP
OBJECTS { hwModbusTransEnable, hwModbusTransServerIP, hwModbusTransServerPort, hwModbusTransServerDestIP, hwModbusTransServerDestPort,
hwModbusTransServerFrameBufNum, hwModbusTransServerClientNum, hwModbusTransSerialTimeout }
STATUS current
DESCRIPTION
"The SPR Service group."
::= { hwSerialConnectGroups 5 }
-- 1.3.6.1.4.1.2011.5.25.338.3.2.6
hwGpioTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwGpioDILevelChange }
STATUS current
DESCRIPTION
"The GpioTraps group."
::= { hwSerialConnectGroups 6 }
END
--
-- HUAWEI-AR-SERIAL-CONNECT-MIB.mib
--
View Git Blame Copy Permalink