1537 lines
68 KiB
Plaintext
1537 lines
68 KiB
Plaintext
-- (C) COPYRIGHT HEWLETT-PACKARD COMPANY 1998.
|
|
--
|
|
-- LaserJet Series 8000 Printer Stapler Model Specific MIB.
|
|
-- (High Capacity Input and Multibin Mailbox with Stapler Options)
|
|
-- See also:
|
|
-- LaserJet Series 8000 Printer Model Specific MIB. (Base Unit)
|
|
-- LaserJet Series 8000 Printer Multibin Mailbox Model Specific MIB.
|
|
-- (Multiple Input Tray and Multibin Mailbox Options)
|
|
--
|
|
-- Generated on April 1, 1998.
|
|
--
|
|
-- Company names and product names mentioned herein may be
|
|
-- trademarks, and/or registered trademarks of their respective
|
|
-- companies.
|
|
--
|
|
-- For interal and external use.
|
|
--
|
|
-- This MIB describes all the printer model specific
|
|
-- objects suppported by the LaserJet Series 8000 printer
|
|
-- when networked connected using a JetDirect print
|
|
-- server.
|
|
--
|
|
-- The following MIB also contain objects supported
|
|
-- by a JetDirect connected LaserJet Series 8000 printer:
|
|
--
|
|
-- rfc 1213 MIB II
|
|
--
|
|
-- This MIB complies with the following RFCs:
|
|
--
|
|
-- rfc 1157 Simple Network Management Protocol
|
|
-- rfc 1155 Structure of Management Information
|
|
--
|
|
-- Notes:
|
|
--
|
|
-- 1) Proprietary Objects containing a string which are defined in this MIB use the
|
|
-- first two bytes to hold the symbol set used to encode the string.
|
|
-- The Roman-8 symbol set has a hex encoding of 0x0115. Other
|
|
-- symbol sets are listed in the PCL 5 Comparison Guide in table
|
|
-- C-1 Symbol Set Values. Standard Printer MIB (prt...objects) and Host Resources
|
|
-- MIB (hr...objects) strings do not contain symbol set information.
|
|
--
|
|
-- 2) Some of the objects included are only supported if an accessory
|
|
-- is installed. These accessories include:
|
|
-- MIO/EIO based accessories
|
|
-- SIMM/DIMM based accessories
|
|
-- Mass storage devices
|
|
-- Paper handling accessories
|
|
--
|
|
--
|
|
LaserJet-Series8000-Stapler-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises FROM SNMPv2-SMI,
|
|
DisplayString FROM SNMPv2-TC;
|
|
|
|
hp OBJECT IDENTIFIER ::= { enterprises 11 }
|
|
nm OBJECT IDENTIFIER ::= { hp 2 }
|
|
hpsystem OBJECT IDENTIFIER ::= { nm 3 }
|
|
net-peripheral OBJECT IDENTIFIER ::= { hpsystem 9 }
|
|
netdm OBJECT IDENTIFIER ::= { net-peripheral 4 }
|
|
dm OBJECT IDENTIFIER ::= { netdm 2}
|
|
|
|
device OBJECT IDENTIFIER ::= { dm 1 }
|
|
destination-subsystem OBJECT IDENTIFIER ::= { device 4 }
|
|
print-engine OBJECT IDENTIFIER ::= { destination-subsystem 1 }
|
|
intray OBJECT IDENTIFIER ::= { print-engine 3 }
|
|
intrays OBJECT IDENTIFIER ::= { intray 3 }
|
|
intray6 OBJECT IDENTIFIER ::= { intrays 6 }
|
|
outbin OBJECT IDENTIFIER ::= { print-engine 4 }
|
|
outbins OBJECT IDENTIFIER ::= { outbin 3 }
|
|
outbin3 OBJECT IDENTIFIER ::= { outbins 3 }
|
|
outbin4 OBJECT IDENTIFIER ::= { outbins 4 }
|
|
outbin5 OBJECT IDENTIFIER ::= { outbins 5 }
|
|
outbin6 OBJECT IDENTIFIER ::= { outbins 6 }
|
|
outbin7 OBJECT IDENTIFIER ::= { outbins 7 }
|
|
outbin8 OBJECT IDENTIFIER ::= { outbins 8 }
|
|
outbin9 OBJECT IDENTIFIER ::= { outbins 9 }
|
|
printmib OBJECT IDENTIFIER ::= { dm 2 }
|
|
prtInput OBJECT IDENTIFIER ::= { printmib 8 }
|
|
prtInputTable OBJECT IDENTIFIER ::= { prtInput 2 }
|
|
prtInputEntry OBJECT IDENTIFIER ::= { prtInputTable 1 }
|
|
prtOutput OBJECT IDENTIFIER ::= { printmib 9 }
|
|
prtOutputTable OBJECT IDENTIFIER ::= { prtOutput 2 }
|
|
prtOutputEntry OBJECT IDENTIFIER ::= { prtOutputTable 1 }
|
|
|
|
|
|
tray6-media-size-loaded OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUSLetter(2),
|
|
eUSLegal(3),
|
|
eLedger(11),
|
|
eISOandJISA4(26),
|
|
eISOandJISA3(27),
|
|
eJISB4(46)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the media size that is currently configured in
|
|
tray #5. Complete list of supported media sizes along
|
|
with their dimensions are listed in the ''Media Size
|
|
Table'' near the end of this document.
|
|
Additional information:
|
|
If the tray drawer is open, a get on this object
|
|
will cause a status of
|
|
<genErr> to be
|
|
returned. If the tray is empty, the size that the
|
|
tray is configured for will be returned"
|
|
::= { intray6 1 }
|
|
|
|
|
|
tray6-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that
|
|
contains this input tray.
|
|
Additional information:
|
|
The internal trays belong to device 0 (base engine), the
|
|
envelope feeder is considered to be device 1
|
|
and the external input devices can number
|
|
between 2 and 6 depending on individual user
|
|
configurations."
|
|
::= { intray6 12 }
|
|
|
|
|
|
outbin3-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent
|
|
media to the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the
|
|
attention condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the
|
|
binder attention condition and continues printing.
|
|
Additional information:
|
|
This object describes the action that is performed
|
|
when the JOB-OUTPUT-AUTO-CONTINUE-TIMEOUT expires.
|
|
The action performed by the CONTINUE object being set
|
|
to eInitiateAction or the GO key being pressed on the
|
|
control panel may cause different actions. See the
|
|
CONTINUE object description for information on the
|
|
actions that occur for those conditions.
|
|
The cCancelJob item overrides the other two options, if
|
|
it is set then the job will be canceled regardless of
|
|
the other settings. If cJobCancel is not set then
|
|
cBinFullOverride will cause the printer to use the
|
|
overflow bin (Set by PML object OVERFLOW-BIN)in
|
|
the case of a bin full condtion. If
|
|
the cBinderAttentionOverride option is set then the
|
|
finisher out warning will be displayed but ignored
|
|
and jobs will continue to go to the finisher anyway.
|
|
OUTBIN3 is the topmost bin on the output device. This bin
|
|
replaces the left output bin on the base printer. OUTBIN4
|
|
through OUTBIN8 are the additional 5 regular bins supplied
|
|
by the MBM5S device. OUTBIN9 is the stapler unit and is
|
|
the lowest bin in the device.
|
|
NOTE: Because HP is marketing a device with a max of
|
|
7 bins (MBM5S) the OUTBINn-OVERRIDE-MODE objects are
|
|
3-9 but the external device specification requires
|
|
support of up to 315 output bins. Therefore if these
|
|
bins exist above 7, then the coresponding objects will
|
|
also exist OUTBIN10-OVERRIDE-MODE through OUTBIN317-OVERRIDE-MODE.
|
|
The data for this object is stored in NVRAM."
|
|
::= { outbin3 9 }
|
|
|
|
|
|
outbin3-maximum-binding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum number of sheets of 20 pound paper that can
|
|
be bound by the binding device that serves this output
|
|
bin. If a job exceeds this number and the job has
|
|
requested binding, cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE.
|
|
Additional information:
|
|
This is a read only object that returns the number of
|
|
20# pages that this bin can bind(i.e. staple). This
|
|
number is used by the host applications to prevent
|
|
jobs that exceed this amount from being sent to this
|
|
bin. If this bin does not have a finishing function
|
|
like stapling where this object is necessary the
|
|
object will return 0.
|
|
OUTBIN3 is the topmost bin on the output device. This bin
|
|
replaces the left output bin on the base printer. OUTBIN4
|
|
through OUTBIN8 are the additional 5 regular bins supplied
|
|
by the MBM5S device. OUTBIN9 is the stapler unit and is
|
|
the lowest bin in the device.
|
|
NOTE: Because HP is marketing a device with a max of
|
|
7 bins (MBM5S) the OUTBINn-MAXIMUM-BINDING objects are
|
|
3-9 but the external device specification requires
|
|
support of up to 315 output bins. Therefore if these
|
|
bins exist above 7, then the coresponding objects will
|
|
also exist OUTBIN10-MAXIMUM-BINDING through
|
|
OUTBIN317-MAXIMUM-BINDING."
|
|
::= { outbin3 10 }
|
|
|
|
|
|
outbin3-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that
|
|
contains this output bin.
|
|
Additional information:
|
|
This object will return the the device number that
|
|
contains this output bin. The envelope feed is
|
|
considered PHD1 thus this object will return
|
|
2-6 depending on where in the device chain the bin
|
|
exists.
|
|
OUTBIN3 is the topmost bin on the output device. This bin
|
|
replaces the left output bin on the base printer. OUTBIN4
|
|
through OUTBIN8 are the additional 5 regular bins supplied
|
|
by the MBM5S device. OUTBIN9 is the stapler unit and is
|
|
the lowest bin in the device.
|
|
NOTE: Because HP is marketing a device with a max of
|
|
7 bins (MBM5S) the OUTBINn-PHD objects are
|
|
3-9 but the external device specification requires
|
|
support of up to 315 output bins. Therefore if these
|
|
bins exist above 7, then the coresponding objects will
|
|
also exist OUTBIN10-PHD through OUTBIN317-PHD."
|
|
::= { outbin3 11 }
|
|
|
|
|
|
outbin4-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent
|
|
media to the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the
|
|
attention condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the
|
|
binder attention condition and continues printing.
|
|
Additional information:
|
|
See OUTBIN3-OVERRIDE-MODE."
|
|
::= { outbin4 9 }
|
|
|
|
|
|
outbin4-maximum-binding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum number of sheets of 20 pound paper that can
|
|
be bound by the binding device that serves this output
|
|
bin. If a job exceeds this number and the job has
|
|
requested binding, cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE.
|
|
Additional information:
|
|
See OUTBIN3-MAXIMUM-BINDING."
|
|
::= { outbin4 10 }
|
|
|
|
|
|
outbin4-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that
|
|
contains this output bin.
|
|
Additional information:
|
|
See OUTBIN3-PHD."
|
|
::= { outbin4 11 }
|
|
|
|
|
|
outbin5-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent
|
|
media to the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the
|
|
attention condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the
|
|
binder attention condition and continues printing.
|
|
Additional information:
|
|
See OUTBIN3-OVERRIDE-MODE."
|
|
::= { outbin5 9 }
|
|
|
|
|
|
outbin5-maximum-binding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum number of sheets of 20 pound paper that can
|
|
be bound by the binding device that serves this output
|
|
bin. If a job exceeds this number and the job has
|
|
requested binding, cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE.
|
|
Additional information:
|
|
See OUTBIN3-MAXIMUM-BINDING."
|
|
::= { outbin5 10 }
|
|
|
|
|
|
outbin5-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that
|
|
contains this output bin.
|
|
Additional information:
|
|
See OUTBIN3-PHD."
|
|
::= { outbin5 11 }
|
|
|
|
|
|
outbin6-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent
|
|
media to the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the
|
|
attention condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the
|
|
binder attention condition and continues printing.
|
|
Additional information:
|
|
See OUTBIN3-OVERRIDE-MODE."
|
|
::= { outbin6 9 }
|
|
|
|
|
|
outbin6-maximum-binding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum number of sheets of 20 pound paper that can
|
|
be bound by the binding device that serves this output
|
|
bin. If a job exceeds this number and the job has
|
|
requested binding, cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE.
|
|
Additional information:
|
|
See OUTBIN3-MAXIMUM-BINDING."
|
|
::= { outbin6 10 }
|
|
|
|
|
|
outbin6-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that
|
|
contains this output bin.
|
|
Additional information:
|
|
See OUTBIN3-PHD."
|
|
::= { outbin6 11 }
|
|
|
|
|
|
outbin7-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent
|
|
media to the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the
|
|
attention condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the
|
|
binder attention condition and continues printing.
|
|
Additional information:
|
|
See OUTBIN3-OVERRIDE-MODE."
|
|
::= { outbin7 9 }
|
|
|
|
|
|
outbin7-maximum-binding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum number of sheets of 20 pound paper that can
|
|
be bound by the binding device that serves this output
|
|
bin. If a job exceeds this number and the job has
|
|
requested binding, cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE.
|
|
Additional information:
|
|
See OUTBIN3-MAXIMUM-BINDING."
|
|
::= { outbin7 10 }
|
|
|
|
|
|
outbin7-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that
|
|
contains this output bin.
|
|
Additional information:
|
|
See OUTBIN3-PHD."
|
|
::= { outbin7 11 }
|
|
|
|
|
|
outbin8-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent
|
|
media to the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the
|
|
attention condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the
|
|
binder attention condition and continues printing.
|
|
Additional information:
|
|
See OUTBIN3-OVERRIDE-MODE."
|
|
::= { outbin8 9 }
|
|
|
|
|
|
outbin8-maximum-binding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum number of sheets of 20 pound paper that can
|
|
be bound by the binding device that serves this output
|
|
bin. If a job exceeds this number and the job has
|
|
requested binding, cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE.
|
|
Additional information:
|
|
See OUTBIN3-MAXIMUM-BINDING."
|
|
::= { outbin8 10 }
|
|
|
|
|
|
outbin8-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that
|
|
contains this output bin.
|
|
Additional information:
|
|
See OUTBIN3-PHD."
|
|
::= { outbin8 11 }
|
|
|
|
|
|
outbin9-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent
|
|
media to the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the
|
|
attention condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the
|
|
binder attention condition and continues printing.
|
|
Additional information:
|
|
See OUTBIN3-OVERRIDE-MODE."
|
|
::= { outbin9 9 }
|
|
|
|
|
|
outbin9-maximum-binding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum number of sheets of 20 pound paper that can
|
|
be bound by the binding device that serves this output
|
|
bin. If a job exceeds this number and the job has
|
|
requested binding, cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE.
|
|
Additional information:
|
|
See OUTBIN3-MAXIMUM-BINDING."
|
|
::= { outbin9 10 }
|
|
|
|
|
|
outbin9-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that
|
|
contains this output bin.
|
|
Additional information:
|
|
See OUTBIN3-PHD."
|
|
::= { outbin9 11 }
|
|
|
|
|
|
outbin9-error-info OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..65535))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A device specific description of the last error
|
|
encountered for output bin 9. Each POS should document
|
|
the meaning of all supported error information.
|
|
Additional information:
|
|
This is a description of the current error state of a
|
|
finishing device. (ie stapler). If the bin does not
|
|
support any finishing capabilities then the object
|
|
will return <badValue>.
|
|
The possible return values are as follows:
|
|
Byte1, Byte2, and Byte3 should be 0x00. as they are
|
|
reserved for future use.
|
|
Byte4 is a bit field that can be interpreted as
|
|
follows:
|
|
bit 0 -- unused
|
|
bit 1 -- eBinderOut Out of staples
|
|
bit 2 -- eBinderLimit Too many pages to finish
|
|
bit 3 -- eBinderJam Staple jammed in stapler
|
|
bit 4 -- eBinderAlign Pages aren't aligned correctly
|
|
to finish.
|
|
bit 5 -- unused
|
|
bit 6 -- unused
|
|
bit 7 -- unused
|
|
|
|
OUTBIN3 is the topmost bin on the output device. This bin
|
|
replaces the left output bin on the base printer. OUTBIN4
|
|
through OUTBIN8 are the additional 5 regular bins supplied
|
|
by the MBM5S device. OUTBIN9 is the stapler unit and is
|
|
the lowest bin in the device.
|
|
NOTE: Because HP is marketing a device with a max of
|
|
7 bins (MBM5S) the OUTBINn-ERROR-INFO objects are
|
|
3-9 but the external device specification requires
|
|
support of up to 315 output bins. Therefore if these
|
|
bins exist above 7, then the coresponding objects will
|
|
also exist OUTBIN10-ERROR-INFO through OUTBIN317-ERROR-INFO."
|
|
::= { outbin9 12 }
|
|
|
|
|
|
prtinputtype OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePsheetFeedAutoRemovableTray(3),
|
|
ePsheetFeedAutoNonRemovableTray(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The type of technology (discriminated primarily according to
|
|
feeder mechanism type) employed by the input sub-unit. Note,
|
|
the Optional Input Class provides for a descriptor field to
|
|
further qualify the other choice.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Tray 1 is the multi-purpose tray and is always present.
|
|
It supports both sheets and envelopes. Its type is
|
|
ePsheetFeedAutoNonRemovableTray.
|
|
Tray 2 is a removable tray that comes standard
|
|
with the printer, although it is usually not removed
|
|
from the printer. It is of type
|
|
ePsheetFeedAutoRemovableTray.
|
|
Tray 3 is a removable tray that comes standard
|
|
with the printer, although it is usually not removed
|
|
from the printer. It is of type
|
|
ePsheetFeedAutoRemovableTray.
|
|
The 4th tray in this array is the envelope feeder. It
|
|
can be detected even when it is installed while the
|
|
printer is powered on.
|
|
Tray 6 is the High-Capacity Input tray, and it must be
|
|
installed before the printer is powered on. It is of
|
|
type ePsheetFeedAutoRemovableTray."
|
|
::= { prtInputEntry 2 }
|
|
|
|
|
|
prtinputdimunit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePtenThousandthsOfInches(3),
|
|
ePmicrometers(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The unit of measurement for use calculating and relaying
|
|
dimensional values for this input sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Following is a table of paper sizes and dimensions
|
|
for each paper size supported by Yukon:
|
|
|
|
Size Inches (ten-thousandths) Millimeters
|
|
Feed x Cross-Feed Feed x Cross-Feed
|
|
--------------- ------------------------ -----------
|
|
eUSExecutive 105000 x 72500 266700 x 184150
|
|
eUSLetter 85000 x 110000 215900 x 279400
|
|
eUSLegal 140000 x 85000 355600 x 215900
|
|
eLedger 170000 x 110000 431800 x 279400
|
|
eISOandJISA5 82677 x 58268 210000 x 148000
|
|
eISOandJISA4 82677 x 116929 210000 x 297000
|
|
eJISB4 143307 x 101181 364000 x 257000
|
|
eJISB5 101181 x 71654 257000 x 182000
|
|
eISOandJISA3 165354 x 116929 420000 x 297000
|
|
eMonarch 75000 x 38750 190500 x 98425
|
|
eCommercial10 95000 x 41250 241300 x 104775
|
|
eInternationalDL 86614 x 43307 220000 x 110000
|
|
eInternationalC5 90157 x 63780 229000 x 162000
|
|
eInternationalB5 98425 x 69291 250000 x 176000
|
|
eJapanesePostcardDouble 78740 x 58268 200000 x 148000
|
|
eCustom 177000 x 117000(max) 449580 x 297180(max)
|
|
"
|
|
::= { prtInputEntry 3 }
|
|
|
|
|
|
prtinputmediadimfeeddirdeclared OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object provides the value of the declared dimension, in
|
|
the feed direction, of the media that is (or, if empty, was or
|
|
will be) in this input sub-unit. The feed direction is the
|
|
direction in which the media is fed on this sub-unit. This
|
|
dimension is measured in input sub-unit dimensional units
|
|
(prtInputDimUnit). If this input sub-unit can reliably sense
|
|
this value, the value is sensed by the printer and may not be
|
|
changed by management requests. Otherwise, the value may be
|
|
changed. The value (-1) means other and specifically means
|
|
that this sub-unit places no restriction on this parameter.
|
|
The value (-2) indicates unknown.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
For trays 2, 3 and 6 (which can reliably sense this
|
|
value) these objects behave exactly the same as
|
|
prtInputMediaDimFeedDirChosen. Attempting to set the
|
|
objects for tray 2, 3 or 6 will cause
|
|
<noSuchName> to be
|
|
returned. The default values assume the trays are
|
|
configured for letter size paper (or COM10, in the case
|
|
of the envelope feeder). For tray 1, the value is the
|
|
dimension for the media size currently declared. For
|
|
the envelope feeder (tray 4), the value is the
|
|
dimension for the media size currently declared.
|
|
Valid values are 0 to 268435455. If a value within 0.2
|
|
inches of a standard size (e.g. 85001) is chosen when
|
|
setting these objects, the standard size will be set
|
|
for the specified tray if the value of
|
|
prtInputMediaDimXFeedDirDeclared is also set to within
|
|
0.2 inches of the same standard size. If the value is
|
|
not within 0.2 inches, Custom will be chosen as the
|
|
size if it is supported by the specified tray,
|
|
otherwise the first available standard size for the
|
|
tray will be selected."
|
|
::= { prtInputEntry 4 }
|
|
|
|
|
|
prtinputmediadimxfeeddirdeclared OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object provides the value of the declared dimension, in
|
|
the cross feed direction, of the media that is (or, if empty,
|
|
was or will be) in this input sub-unit. The cross feed
|
|
direction is ninety degrees relative to the feed direction
|
|
associated with this sub-unit. This dimension is measured in
|
|
input sub-unit dimensional units (prtInputDimUnit). If this
|
|
input sub-unit can reliably sense this value, the value is
|
|
sensed by the printer and may not be changed by management
|
|
requests. Otherwise, the value may be changed. The value (-1)
|
|
means other and specifically means that this sub-unit places
|
|
no restriction on this parameter. The value (-2) indicates
|
|
unknown.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
For trays 2, 3 and 6 (which can reliably sense this
|
|
value) these objects behave exactly the same as
|
|
prtInputMediaDimFeedDirChosen. Attempting to set the
|
|
objects for tray 2, 3 or 6 will cause
|
|
<noSuchName> to be
|
|
returned. The default values assume the trays are
|
|
configured for letter size paper (or COM10, in the case
|
|
of the envelope feeder). For tray 1, the value is the
|
|
dimension for the media size currently declared. For
|
|
the envelope feeder (tray 4), the value is the
|
|
dimension for the media size currently declared.
|
|
Valid values are 0 to 268435455. If a value within 0.2
|
|
inches of a standard size (e.g. 85001) is chosen when
|
|
setting these objects, the standard size will be set
|
|
for the specified tray if the value of
|
|
prtInputMediaDimXFeedDirDeclared is also set to within
|
|
0.2 inches of the same standard size. If the value is
|
|
not within 0.2 inches, Custom will be chosen as the
|
|
size if it is supported by the specified tray,
|
|
otherwise the first available standard size for the
|
|
tray will be selected."
|
|
::= { prtInputEntry 5 }
|
|
|
|
|
|
prtinputmediadimfeeddirchosen OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The printer will act as if media of the chosen dimension (in
|
|
the feed direction) is present in this input source. Note
|
|
that this value will be used even if the input tray is empty.
|
|
Feed dimension measurements are taken relative to the feed
|
|
direction associated with that sub-unit and are in input sub-unit
|
|
dimensional units (MediaUnit). If the printer supports the
|
|
declared dimension, the granted dimension is the same as
|
|
the declared dimension. If not, the granted dimension is
|
|
set to the closest dimension that the printer supports
|
|
when the declared dimension is set. The value (-1) means
|
|
other and specifically indicates that this sub-unit
|
|
places no restriction on this parameter. The value (-2)
|
|
indicates unknown.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
The objects for trays 2, 3, and 6 reflect the
|
|
configuration of the corresponding trays. When the tray
|
|
is removed, a value of -2 is returned. The default
|
|
values assume the trays are configured for letter size
|
|
paper (or COM10, in the case of the envelope feeder).
|
|
For tray 1 and the envelope feeder, the object returns
|
|
the value of the media size for which the tray is
|
|
currently configured because those trays cannot sense
|
|
what size media they contain."
|
|
::= { prtInputEntry 6 }
|
|
|
|
|
|
prtinputmediadimxfeeddirchosen OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The printer will act as if media of the chosen dimension (in
|
|
the cross feed direction) is present in this input source.
|
|
Note that this value will be used even if the input tray is
|
|
empty. The cross feed direction is ninety degrees relative
|
|
to the feed direction associated with this sub-unit. This
|
|
dimension is measured in input sub-unit dimensional units
|
|
(MediaUnit). If the printer supports the declared
|
|
dimension, the granted dimension is the same as the
|
|
declared dimension. If not, the granted dimension is set
|
|
to the closest dimension that the printer supports when
|
|
the declared dimension is set. The value (-1) means other
|
|
and specifically indicates that this sub-unit places no
|
|
restriction on this parameter. The value (-2) indicates
|
|
unknown.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
The objects for trays 2, 3, and 6 reflect the
|
|
configuration of the corresponding trays. When the tray
|
|
is removed, a value of -2 is returned. The default
|
|
values assume the trays are configured for letter size
|
|
paper (or COM10, in the case of the envelope feeder).
|
|
For tray 1 and the envelope feeder, the object returns
|
|
the value of the media size for which the tray is
|
|
currently configured because those trays cannot sense
|
|
what size media they contain."
|
|
::= { prtInputEntry 7 }
|
|
|
|
|
|
prtinputcapacityunit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePsheets(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The unit of measurement for use in calculating and relaying
|
|
capacity values for this input sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
A sheet is a single piece of 20 pound paper. For tray
|
|
4, the envelope feeder, a sheet is one envelope"
|
|
::= { prtInputEntry 8 }
|
|
|
|
|
|
prtinputmaxcapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum capacity of the input sub-unit in input
|
|
sub-unit capacity units (PrtCapacityUnitTC). There is no
|
|
convention associated with the media itself so this value
|
|
reflects claimed capacity. If this input sub-unit can
|
|
reliably sense this value, the value is sensed by the
|
|
printer and may not be changed by management requests;
|
|
otherwise, the value may be written (by a Remote
|
|
Control Panel or a Management Application).
|
|
The value (-1) means other and specifically
|
|
indicates that the sub-unit places no restrictions
|
|
on this parameter. The value (-2) means unknown.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Replaces PML TRAYn-MAXIMUM-CAPACITY. This is
|
|
specified assuming 20 pound paper for the paper trays."
|
|
::= { prtInputEntry 9 }
|
|
|
|
|
|
prtinputcurrentlevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The current capacity of the input sub-unit in input
|
|
sub-unit capacity units (PrtCapacityUnitTC). If this input
|
|
sub-unit can reliably sense this value, the value is
|
|
sensed by the printer and may not be changed by
|
|
management requests; otherwise, the value may
|
|
be written (by a Remote Contol Panel or a
|
|
Management Application). The value (-1) means other and
|
|
specifically indicates that the sub-unit places no
|
|
restrictions on this parameter. The value (-2) means unknown.
|
|
The value (-3) means that the printer knows that at least one
|
|
unit remains.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Koala & Yukon can detect tray level within roughly 25% for
|
|
trays 2, 3 & 6. For Trays 1 and 4, -3 will be returned if
|
|
the tray is not empty, and 0 will be returned if the tray
|
|
is empty.
|
|
If a tray is removed, a value of -2 (unknown) will
|
|
be returned."
|
|
::= { prtInputEntry 10 }
|
|
|
|
|
|
prtinputstatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The current status of this input sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Replaces PML STATUS-TRAY-MISSING and STATUS-TRAY-EMPTY.
|
|
Values returned by the firmware are detailed in the
|
|
following table. 'Value Or'd Due To Condition' indicates
|
|
that the specified value will be logically or'd into the
|
|
value for this object when the specified Condition
|
|
occurs.
|
|
Condition Value Or'd Due To Condition
|
|
----------------------- ------------------------
|
|
Tray Lifter Error 1 + 2
|
|
Tray not installed or
|
|
not inserted or empty 1
|
|
Tray is current source tray 4 + 2
|
|
Tray involved in paper mount 16 + 32
|
|
Value 3 or 1 is Or'd in 8
|
|
Tray is lifting 64
|
|
"
|
|
::= { prtInputEntry 11 }
|
|
|
|
|
|
prtinputmedianame OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..63))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A description of the media contained in this input sub-unit;
|
|
This description is intended for display to a human operator.
|
|
This description is not processed by the printer. It is used
|
|
to provide information not expressible in terms of the other
|
|
media attributes (e.g. prtInputMediaDimFeedDirChosen,
|
|
prtInputMediaDimXFeedDirChosen, prtInputMediaWeight,
|
|
prtInputMediaType). An example would be `legal tender bond
|
|
paper'.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Replaces PML TRAYn-MEDIA-NAME.
|
|
If set to a string other than one contained by a
|
|
MEDIAn-NAME object, a status of
|
|
<badValue> is returned. If set
|
|
to a string that is unsupported for the specified tray
|
|
object, a status of <badValue> is
|
|
returned. The value of this object is saved across a
|
|
power cycle."
|
|
::= { prtInputEntry 12 }
|
|
|
|
|
|
prtinputname OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..63))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The name assigned to this input sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Replaces PML TRAYn-NAME."
|
|
::= { prtInputEntry 13 }
|
|
|
|
|
|
prtinputvendorname OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..63))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The vendor name of this input sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB."
|
|
::= { prtInputEntry 14 }
|
|
|
|
|
|
prtinputmodel OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..63))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The model name of this input sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
MoBY does not specify a model name for Tray 1, 2 or 3"
|
|
::= { prtInputEntry 15 }
|
|
|
|
|
|
prtinputversion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..63))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The version of this input sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Yukon does not specify a version number
|
|
for the input trays."
|
|
::= { prtInputEntry 16 }
|
|
|
|
|
|
prtinputserialnumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The serial number assigned to this input sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Yukon does not specify a serial number for the
|
|
input trays."
|
|
::= { prtInputEntry 17 }
|
|
|
|
|
|
prtinputdescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A free-form text description of this input
|
|
sub-unit in the localization specified by
|
|
prtGeneralCurrentLocalization.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB."
|
|
::= { prtInputEntry 18 }
|
|
|
|
|
|
prtinputsecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePother(1),
|
|
ePon(3),
|
|
ePoff(4),
|
|
ePnotPresent(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates if this input sub-unit has some security
|
|
associated with it.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
No security mechanism provided."
|
|
::= { prtInputEntry 19 }
|
|
|
|
|
|
prtinputmedialoadtimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"When the printer is not able to print due to a subunit
|
|
being empty or the requested media must be manually loaded, the
|
|
printer will wait for the duration (in seconds) specified by this
|
|
object. Upon expiration of the timeout, the printer will take the
|
|
action specified by prtInputNextIndex.
|
|
The event which causes the printer to enter the waiting state is
|
|
product specific. If the printer is not waiting for manually fed
|
|
media, it may switch from an empty subunit to a different subunit
|
|
without waiting for the timeout to expire.
|
|
A value of (-1) implies 'other' or 'infinite' which translates to
|
|
'wait forever'. The action which causes printing to continue is
|
|
product specific. A value of (-2) implies 'unknown'.
|
|
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
This object simply reflects the value of the
|
|
JOB-INPUT-AUTO-CONTINUE-TIMEOUT object. See the
|
|
description of that object for additional information."
|
|
::= { prtInputEntry 24 }
|
|
|
|
|
|
prtinputnextindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The value of prtInputIndex corresponding to the input
|
|
subunit which will be used when this input subunit is emptied and
|
|
the timeout specified by prtInputMediaLoadTimeout expires. A
|
|
value of zero(0) indicates that auto input switching will not
|
|
occur when this input subunit is emptied. If the timeout
|
|
specified by prtInputLoadMediaTimeout expires and this value is
|
|
zero(0), the job will be aborted. A value of (-1) means other.
|
|
The value (-2) means 'unknown' and specifically indicates that an
|
|
implementation specific method will determine the next input
|
|
subunit to use at the time this subunit is emptied and the
|
|
timeout expires. The value(-3) means input switching is not
|
|
supported for this subunit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
This object reflects the state of
|
|
JOB-INPUT-AUTO-CONTINUE-MODE
|
|
and JOB-INPUT-AUTO-CONTINUE-TIMEOUT. If
|
|
JOB-INPUT-AUTO-CONTINUE-TIMEOUT is set to -1 or
|
|
JOB-INPUT-AUTO-CONTINUE-MODE is set up to cancel the
|
|
job, this object will return 0. If
|
|
JOB-INPUT-AUTO-CONTINUE-TIMEOUT is >= 0 and
|
|
JOB-INPUT-AUTO-CONTINUE-MODE is not set up to
|
|
cancel the job, this object will return -2, meaning that
|
|
a product-specific tray switching action will occur."
|
|
::= { prtInputEntry 26 }
|
|
|
|
|
|
prtoutputtype OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePremovableBin(3),
|
|
ePunRemovableBin(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The type of technology supported by this output sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB."
|
|
::= { prtOutputEntry 2 }
|
|
|
|
|
|
prtoutputcapacityunit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePsheets(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The unit of measurement for use in calculating and relaying
|
|
capacity values for this output sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
A sheet is a single piece of 20 pound paper."
|
|
::= { prtOutputEntry 3 }
|
|
|
|
|
|
prtoutputmaxcapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum capacity of this output sub-unit in output
|
|
sub-unit capacity units (PrtCapacityUnitTC). There is no
|
|
convention associated with the media itself so this value
|
|
essentially reflects claimed capacity. If this output
|
|
sub-unit can reliably sense this value, the value is
|
|
sensed by the printer and may not be changed by management
|
|
requests; otherwise, the value may be written
|
|
(by a Remote Control Panel or a Management Application).
|
|
The value (-1) means other and specifically indicates
|
|
that the sub-unit places no restrictions on this parameter.
|
|
The value (-2) means unknown.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Replaces PML OUTBINn-MAXIMUM-CAPACITY.
|
|
Output sub-unit 2 is not supported if any output paper
|
|
handling device is attached.
|
|
The capacity of sub-unit 4 depends on the mode of
|
|
operation. The capacities are as follows:
|
|
Stacker: OutBin3: 125
|
|
OutBin4: 1250
|
|
OutBin5: 300 (sub-units 6-9 do not exist)
|
|
Job Separator: OutBin3: 125
|
|
OutBin4: 1250
|
|
OutBin5: 300 (sub-units 6-9 do not exist)
|
|
Mailbox: OutBin3: 125 (this is the default mode)
|
|
OutBin4: 250
|
|
OutBin5: 250
|
|
OutBin6: 250
|
|
OutBin7: 250
|
|
OutBin8: 250
|
|
OutBin9: 300"
|
|
::= { prtOutputEntry 4 }
|
|
|
|
|
|
prtoutputremainingcapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The remaining capacity of the possible output sub-unit
|
|
capacity in output sub-unit capacity units (PrtCapacityUnitTC)
|
|
of this output sub-unit. If this output sub-unit can
|
|
reliably sense this value, the value is sensed by the
|
|
printer and may not be modified by management requests;
|
|
otherwise, the value may be written (by
|
|
a Remote Control Panel or a Management
|
|
Application). The value (-1) means other and
|
|
specifically indicates that the sub-unit places no
|
|
restrictions on this parameter. The value (-2) means
|
|
unknown. The value (-3) means that the printer knows that
|
|
there remains capacity for at least one unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Replaces PML NOT-READY-OUTBIN-FULL and
|
|
STATUS-OUTBIN-FULL.
|
|
The values reported for output sub-unit 1 (face-down,
|
|
top bin) will be either (-3) if it is not
|
|
full or (0) if it is full.
|
|
Output sub-unit 2 (face-up, left side bin) does not
|
|
have any sensing, so it will always report unknown (-2).
|
|
The first output sub-unit (3) of the MBM reports
|
|
either (-3) if it is not full or (0) if
|
|
it is full.
|
|
In mailbox mode, the MBM sub-units (4-8) will report
|
|
(250) when empty, (125) when there's room for <250
|
|
sheets and (0) when full.
|
|
The STAPLER sub-unit (9) will report (-3) when not full
|
|
and (0) when full.
|
|
Note: Due to MBM mechanism limitations, the value
|
|
reported may not always be accurate (the bin status is
|
|
detected only when the media delivery head is moved to
|
|
or past a physical bin). Also, for stacker mode a bin
|
|
is considered full as long as any bin above it is not
|
|
empty.
|
|
Default values assume all sub-units are empty and the
|
|
MBM is in mailbox mode."
|
|
::= { prtOutputEntry 5 }
|
|
|
|
|
|
prtoutputstatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The current status of this output sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Replaces PML NOT-READY-OUTBIN-MISSING and
|
|
STATUS-OUTBIN-MISSING.
|
|
The default values assume all bins are empty.
|
|
See SubUnitStatus in RFC1759 Printer MIB for details on
|
|
values reported by this object. Yukon will not include
|
|
values Available and Standby (2), Available and Active
|
|
(4), Unknown (5) or Transitioning to intended state
|
|
(64).
|
|
Values returned by the firmware are detailed in the
|
|
following table. 'Value Or'd Due To Condition' indicates
|
|
that the specified value will be logically or'd into the
|
|
value for this object when the specified Condition
|
|
occurs.
|
|
Condition Value Or'd Due To Condition
|
|
----------------------- ------------------------
|
|
Binder Error 1 + 2
|
|
Bin full, binder empty,
|
|
bind limit reached, binder
|
|
align error, bin attention
|
|
error, or bin attention
|
|
warning 1
|
|
Bin is current bin and
|
|
paper is moving 2 + 4
|
|
Bin is the bin responsible
|
|
for Bin Full error message
|
|
being displayed 16 + 32
|
|
Value 1 or 3 is Or'd in 8"
|
|
::= { prtOutputEntry 6 }
|
|
|
|
|
|
prtoutputname OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..15))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The name assigned to this output sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Replaces PML OUTBINn-NAME.
|
|
The characters must be in the range 20H to 7FH except
|
|
5C cannot be used. When this string is displayed on the
|
|
control panel the Roman-8 symbol set is used.
|
|
The object for bin 2 is not available when the MBM is
|
|
attached.
|
|
Factory default bin names are localized, but users can
|
|
rename the output bins. The STANDARD OUTBIN cannot be
|
|
renamed, but all of the optional outbins can."
|
|
::= { prtOutputEntry 7 }
|
|
|
|
|
|
prtoutputvendorname OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..63))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The vendor name of this output sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
"
|
|
::= { prtOutputEntry 8 }
|
|
|
|
|
|
prtoutputmodel OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..63))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The name assigned to this output sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
The value returned by the MBM depends on the current
|
|
mode of the device. The possible values are as follows:
|
|
MULTIBIN MAILBOX MBM-8 C4785B
|
|
MULTIBIN MAILBOX MBM-12 C4786A
|
|
MULTIBIN MAILBOX MBM-5S [15-Y] C4787A
|
|
STAPLER MODULE C3766A [3.23.41.39]"
|
|
::= { prtOutputEntry 9 }
|
|
|
|
|
|
prtoutputversion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..63))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The version of this output sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Returns device-specific information about the
|
|
configuration of the output bin. May include
|
|
information about the type of processing that can be
|
|
done to media sent to this bin; processing includes but
|
|
is not limited to binding, punching, folding and
|
|
sealing. Format of this object is specified by the
|
|
output device documentation."
|
|
::= { prtOutputEntry 10 }
|
|
|
|
|
|
prtoutputserialnumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..63))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The serial number assigned to this output sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Yukon does not support a serial number for output
|
|
devices."
|
|
::= { prtOutputEntry 11 }
|
|
|
|
|
|
prtoutputdescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
" A free-form text description of this output sub-unit in the
|
|
localization specified by prtGeneralCurrentLocalization.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
This object returns the exact same string as
|
|
prtOutputName. The factory default bin names
|
|
are localized, but users have the ability to
|
|
rename them."
|
|
::= { prtOutputEntry 12 }
|
|
|
|
|
|
prtoutputsecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePother(1),
|
|
ePon(3),
|
|
ePoff(4),
|
|
ePnotPresent(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates if this output sub-unit has some security associated
|
|
with it and if that security is enabled or not.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
No security mechanism provided."
|
|
::= { prtOutputEntry 13 }
|
|
|
|
|
|
prtoutputdimunit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePtenThousandthsOfInches(3),
|
|
ePmicrometers(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The unit of measurement for use in calculating and relaying
|
|
dimensional values for this output sub-unit.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
See the description for prtInputDimUnit for a table
|
|
of dimensions for supported paper sizes for Yukon."
|
|
::= { prtOutputEntry 14 }
|
|
|
|
|
|
prtoutputmaxdimfeeddir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum dimensions supported by this output sub-unit
|
|
for measurements taken parallel relative to the feed
|
|
direction associated with that sub-unit in output
|
|
sub-unit dimensional units (MediaUnit). If this output
|
|
sub-unit can reliably sense this value, the value is
|
|
sensed by the printer and may not be changed with
|
|
management protocol operations.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
The value returned by this object depends on the value
|
|
of prtOutputDimUnit. For example, for the built-in
|
|
output bins, it is 177000 if prtOutputDimUnit is
|
|
ePtenThousandthsOfInches or 450000 if prtOutputDimUnit
|
|
is ePmicrometers. 177000 corresponds to the largest custom
|
|
paper size a Yukon engine can handle. 170000 is the length
|
|
of Ledger paper, which is the largest an external device
|
|
can handle, and 85000 is the feed dimension of LETTER paper,
|
|
which is the largest size the stapler can handle."
|
|
::= { prtOutputEntry 15 }
|
|
|
|
|
|
prtoutputmaxdimxfeeddir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum dimensions supported by this output sub-unit
|
|
for measurements taken ninety degrees relative to the
|
|
feed direction associated with that sub-unit in output
|
|
sub-unit dimensional units (MediaUnit). If this output
|
|
sub-unit can reliably sense this value, the value is
|
|
sensed by the printer and may not be changed with
|
|
management protocol operations.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
The value returned by this object depends on the value
|
|
of prtOutputDimUnit. For example, for the built-in
|
|
output bins, it is 117000 if prtOutputDimUnit is
|
|
ePtenThousandthsOfInches and 297180 if prtOutputDimUnit
|
|
is ePmicrometers."
|
|
::= { prtOutputEntry 16 }
|
|
|
|
|
|
prtoutputmindimfeeddir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The minimum dimensions supported by this output sub-unit
|
|
for measurements taken parallel relative to the feed
|
|
direction associated with that sub-unit in output
|
|
sub-unit dimensional units (DimUnit). If this output
|
|
sub-unit can reliably sense this value, the value is
|
|
sensed by the printer and may not be changed with
|
|
management protocol operations.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
The value returned by this object depends on the value
|
|
of prtOutputDimUnit. For example, for the built-in
|
|
output bins, it is 75000 if prtOutputDimUnit is
|
|
ePtenThousandthsOfInches or 190500 if prtOutputDimUnit
|
|
is ePmicrometers."
|
|
::= { prtOutputEntry 17 }
|
|
|
|
|
|
prtoutputmindimxfeeddir OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The minimum dimensions supported by this output sub-unit
|
|
for measurements taken ninety degrees relative to the
|
|
feed direction associated with that sub-unit in output
|
|
sub-unit dimensional units (DimUnit). If this output
|
|
sub-unit can reliably sense this value, the value is
|
|
sensed by the printer and may not be changed with
|
|
management protocol operations.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
The value returned by this object depends on the value
|
|
of prtOutputDimUnit. For example, for the built-in
|
|
output trays, it is 36700 if prtOutputDimUnit is
|
|
ePtenThousandthsOfInches or 93000 if prtOutputDimUnit
|
|
is ePmicrometers."
|
|
::= { prtOutputEntry 18 }
|
|
|
|
|
|
prtoutputstackingorder OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePunknown(2),
|
|
ePfirstToLast(3),
|
|
ePlastToFirst(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The current state of the stacking order for the
|
|
associated output sub-unit. `FirstToLast' means
|
|
that as pages are output the front of the next page is
|
|
placed against the back of the previous page.
|
|
`LasttoFirst' means that as pages are output the back
|
|
of the next page is placed against the front of the
|
|
previous page.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Replaces PML OUTBINn-STACK-ORDER."
|
|
::= { prtOutputEntry 19 }
|
|
|
|
|
|
prtoutputpagedeliveryorientation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePfaceUp(3),
|
|
ePfaceDown(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The reading surface that will be `up' when pages are
|
|
delivered to the associated output sub-unit. Values are
|
|
faceUp and faceDown. (Note: interpretation of these
|
|
values is in general context-dependent based on locale;
|
|
presentation of these values to an end-user should be
|
|
normalized to the expectations of the user).
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB."
|
|
::= { prtOutputEntry 20 }
|
|
|
|
|
|
prtoutputbursting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePother(1),
|
|
ePon(3),
|
|
ePoff(4),
|
|
ePnotPresent(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object indicates that the outputting sub-unit
|
|
supports bursting, and if so, whether the feature is enabled.
|
|
Bursting is the process by which continuous media is separated
|
|
into individual sheets, typically by bursting along pre-formed
|
|
perforations.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Bursting is not supported."
|
|
::= { prtOutputEntry 21 }
|
|
|
|
|
|
prtoutputdecollating OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePother(1),
|
|
ePon(3),
|
|
ePoff(4),
|
|
ePnotPresent(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object indicates that the output supports
|
|
supports decollating, and if so, whether the feature
|
|
is enabled. Decollating is the process by which the
|
|
individual parts within a multi-part form are separated
|
|
and sorted into separate stacks for each part.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Decollating is not supported."
|
|
::= { prtOutputEntry 22 }
|
|
|
|
|
|
prtoutputpagecollated OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePother(1),
|
|
ePon(3),
|
|
ePoff(4),
|
|
ePnotPresent(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object indicates that the output sub-unit
|
|
supports page collation, and if so, whether the feature is
|
|
enabled. See glossary for definition of how this document defines
|
|
collation.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Page collation is not supported."
|
|
::= { prtOutputEntry 23 }
|
|
|
|
|
|
prtoutputoffsetstacking OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePother(1),
|
|
ePon(3),
|
|
ePoff(4),
|
|
ePnotPresent(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object indicates that the output supports
|
|
supports offset stacking, and if so, whether the feature is
|
|
enabled. See glossary for how Offset Stacking is defined by this
|
|
document.
|
|
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
|
|
Additional information:
|
|
Offset stacking is not supported."
|
|
::= { prtOutputEntry 24 }
|
|
|
|
|
|
END
|