9704 lines
389 KiB
Plaintext
9704 lines
389 KiB
Plaintext
-- (C) COPYRIGHT HEWLETT-PACKARD COMPANY 2004.
|
|
--
|
|
-- LaserJet 9500 Printer Specific MIB.
|
|
--
|
|
-- Generated on Oct. 19, 2004.
|
|
--
|
|
-- Company names and product names mentioned herein may be
|
|
-- trademarks, and/or registered trademarks of their respective
|
|
-- companies.
|
|
--
|
|
-- For internal and external use.
|
|
--
|
|
-- This MIB describes all the printer model specific
|
|
-- objects supported by the LaserJet 9500 printer
|
|
-- when networked connected using a JetDirect print
|
|
-- server.
|
|
--
|
|
--
|
|
-- This MIB complies with the following RFCs:
|
|
--
|
|
-- rfc 1157 Simple Network Management Protocol
|
|
-- rfc 1155 Structure of Management Information
|
|
--
|
|
-- Notes:
|
|
--
|
|
-- 1) Objects containing a string which are defined in this MIB use the
|
|
-- first two bytes to hold the symbol set used to encode the string.
|
|
-- The Roman-8 symbol set has a hex encoding of 0x0115. Other
|
|
-- symbol sets are listed in the PCL 5 Comparison Guide in table
|
|
-- C-1 Symbol Set Values.
|
|
--
|
|
-- 2) Some of the objects included are only supported if an accessory
|
|
-- is installed. These accessories include:
|
|
-- MIO based accessories
|
|
-- SIMM based accessories
|
|
-- AT hard disk
|
|
-- Paper handling accessories
|
|
-- Adobe PostScript accessory
|
|
LJ9500-MIB DEFINITIONS ::= BEGIN
|
|
|
|
hp MODULE-IDENTITY
|
|
LAST-UPDATED "0402181325Z"
|
|
ORGANIZATION "Hewlett-Packard Company"
|
|
CONTACT-INFO
|
|
"Customer Care Center
|
|
Tel: +1 800-474-6836
|
|
WEB: http://www.hp.com"
|
|
|
|
DESCRIPTION "Objects used in the HP LaserJet 9500 printer."
|
|
|
|
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) 11}
|
|
|
|
netPMLmgmt OBJECT IDENTIFIER ::= { hp nm(2) system(3) netPeripheral(9) netPML(4) 2}
|
|
|
|
DisplayString ::= OCTET STRING
|
|
|
|
device OBJECT IDENTIFIER ::= { netPMLmgmt 1 }
|
|
device-system OBJECT IDENTIFIER ::= { device 1 }
|
|
status-system OBJECT IDENTIFIER ::= { device-system 2 }
|
|
test OBJECT IDENTIFIER ::= { device-system 5 }
|
|
background-message OBJECT IDENTIFIER ::= { status-system 37 }
|
|
background-message1 OBJECT IDENTIFIER ::= { background-message 1 }
|
|
background-message2 OBJECT IDENTIFIER ::= { background-message 2 }
|
|
control-panel-display OBJECT IDENTIFIER ::= { status-system 65 }
|
|
destination-subsystem OBJECT IDENTIFIER ::= { device 4 }
|
|
print-engine OBJECT IDENTIFIER ::= { destination-subsystem 1 }
|
|
settings-system OBJECT IDENTIFIER ::= { device-system 1 }
|
|
interface OBJECT IDENTIFIER ::= { device-system 4 }
|
|
simm OBJECT IDENTIFIER ::= { interface 1 }
|
|
simm1 OBJECT IDENTIFIER ::= { simm 1 }
|
|
simm1-bank OBJECT IDENTIFIER ::= { simm1 6 }
|
|
simm1-bank1 OBJECT IDENTIFIER ::= { simm1-bank 1 }
|
|
simm1-bank2 OBJECT IDENTIFIER ::= { simm1-bank 2 }
|
|
simm2 OBJECT IDENTIFIER ::= { simm 2 }
|
|
simm2-bank OBJECT IDENTIFIER ::= { simm2 6 }
|
|
simm2-bank1 OBJECT IDENTIFIER ::= { simm2-bank 1 }
|
|
simm2-bank2 OBJECT IDENTIFIER ::= { simm2-bank 2 }
|
|
simm3 OBJECT IDENTIFIER ::= { simm 3 }
|
|
simm3-bank OBJECT IDENTIFIER ::= { simm3 6 }
|
|
simm3-bank1 OBJECT IDENTIFIER ::= { simm3-bank 1 }
|
|
simm3-bank2 OBJECT IDENTIFIER ::= { simm3-bank 2 }
|
|
simm4 OBJECT IDENTIFIER ::= { simm 4 }
|
|
simm4-bank OBJECT IDENTIFIER ::= { simm4 6 }
|
|
simm4-bank1 OBJECT IDENTIFIER ::= { simm4-bank 1 }
|
|
simm4-bank2 OBJECT IDENTIFIER ::= { simm4-bank 2 }
|
|
simm5 OBJECT IDENTIFIER ::= { simm 5 }
|
|
simm5-bank OBJECT IDENTIFIER ::= { simm5 6 }
|
|
simm5-bank1 OBJECT IDENTIFIER ::= { simm5-bank 1 }
|
|
simm5-bank2 OBJECT IDENTIFIER ::= { simm5-bank 2 }
|
|
job OBJECT IDENTIFIER ::= { device-system 6 }
|
|
settings-job OBJECT IDENTIFIER ::= { job 1 }
|
|
operating-system OBJECT IDENTIFIER ::= { device-system 19 }
|
|
processing-subsystem OBJECT IDENTIFIER ::= { device 3 }
|
|
pdl OBJECT IDENTIFIER ::= { processing-subsystem 3 }
|
|
settings-pdl OBJECT IDENTIFIER ::= { pdl 1 }
|
|
status-pdl OBJECT IDENTIFIER ::= { pdl 2 }
|
|
errorlog OBJECT IDENTIFIER ::= { device-system 11 }
|
|
error1 OBJECT IDENTIFIER ::= { errorlog 1 }
|
|
error2 OBJECT IDENTIFIER ::= { errorlog 2 }
|
|
error3 OBJECT IDENTIFIER ::= { errorlog 3 }
|
|
error4 OBJECT IDENTIFIER ::= { errorlog 4 }
|
|
error5 OBJECT IDENTIFIER ::= { errorlog 5 }
|
|
error6 OBJECT IDENTIFIER ::= { errorlog 6 }
|
|
error7 OBJECT IDENTIFIER ::= { errorlog 7 }
|
|
error8 OBJECT IDENTIFIER ::= { errorlog 8 }
|
|
error9 OBJECT IDENTIFIER ::= { errorlog 9 }
|
|
error10 OBJECT IDENTIFIER ::= { errorlog 10 }
|
|
error11 OBJECT IDENTIFIER ::= { errorlog 11 }
|
|
error12 OBJECT IDENTIFIER ::= { errorlog 12 }
|
|
error13 OBJECT IDENTIFIER ::= { errorlog 13 }
|
|
error14 OBJECT IDENTIFIER ::= { errorlog 14 }
|
|
error15 OBJECT IDENTIFIER ::= { errorlog 15 }
|
|
error16 OBJECT IDENTIFIER ::= { errorlog 16 }
|
|
error17 OBJECT IDENTIFIER ::= { errorlog 17 }
|
|
error18 OBJECT IDENTIFIER ::= { errorlog 18 }
|
|
error19 OBJECT IDENTIFIER ::= { errorlog 19 }
|
|
error20 OBJECT IDENTIFIER ::= { errorlog 20 }
|
|
error21 OBJECT IDENTIFIER ::= { errorlog 21 }
|
|
error22 OBJECT IDENTIFIER ::= { errorlog 22 }
|
|
error23 OBJECT IDENTIFIER ::= { errorlog 23 }
|
|
error24 OBJECT IDENTIFIER ::= { errorlog 24 }
|
|
error25 OBJECT IDENTIFIER ::= { errorlog 25 }
|
|
error26 OBJECT IDENTIFIER ::= { errorlog 26 }
|
|
error27 OBJECT IDENTIFIER ::= { errorlog 27 }
|
|
error28 OBJECT IDENTIFIER ::= { errorlog 28 }
|
|
error29 OBJECT IDENTIFIER ::= { errorlog 29 }
|
|
error30 OBJECT IDENTIFIER ::= { errorlog 30 }
|
|
error31 OBJECT IDENTIFIER ::= { errorlog 31 }
|
|
error32 OBJECT IDENTIFIER ::= { errorlog 32 }
|
|
error33 OBJECT IDENTIFIER ::= { errorlog 33 }
|
|
error34 OBJECT IDENTIFIER ::= { errorlog 34 }
|
|
error35 OBJECT IDENTIFIER ::= { errorlog 35 }
|
|
error36 OBJECT IDENTIFIER ::= { errorlog 36 }
|
|
error37 OBJECT IDENTIFIER ::= { errorlog 37 }
|
|
error38 OBJECT IDENTIFIER ::= { errorlog 38 }
|
|
error39 OBJECT IDENTIFIER ::= { errorlog 39 }
|
|
error40 OBJECT IDENTIFIER ::= { errorlog 40 }
|
|
error41 OBJECT IDENTIFIER ::= { errorlog 41 }
|
|
error42 OBJECT IDENTIFIER ::= { errorlog 42 }
|
|
error43 OBJECT IDENTIFIER ::= { errorlog 43 }
|
|
error44 OBJECT IDENTIFIER ::= { errorlog 44 }
|
|
error45 OBJECT IDENTIFIER ::= { errorlog 45 }
|
|
error46 OBJECT IDENTIFIER ::= { errorlog 46 }
|
|
error47 OBJECT IDENTIFIER ::= { errorlog 47 }
|
|
error48 OBJECT IDENTIFIER ::= { errorlog 48 }
|
|
error49 OBJECT IDENTIFIER ::= { errorlog 49 }
|
|
error50 OBJECT IDENTIFIER ::= { errorlog 50 }
|
|
channel OBJECT IDENTIFIER ::= { device 6 }
|
|
display OBJECT IDENTIFIER ::= { status-system 20 }
|
|
display-status OBJECT IDENTIFIER ::= { display 1 }
|
|
id OBJECT IDENTIFIER ::= { device-system 3 }
|
|
pdl-pcl OBJECT IDENTIFIER ::= { pdl 3 }
|
|
pdl-postscript OBJECT IDENTIFIER ::= { pdl 4 }
|
|
socket-ping OBJECT IDENTIFIER ::= { interface 7 }
|
|
active-print-jobs OBJECT IDENTIFIER ::= { job 2 }
|
|
job-being-parsed OBJECT IDENTIFIER ::= { active-print-jobs 1 }
|
|
job-info OBJECT IDENTIFIER ::= { job 5 }
|
|
job-info-attribute OBJECT IDENTIFIER ::= { job-info 23 }
|
|
job-info-accounting OBJECT IDENTIFIER ::= { job-info 28 }
|
|
held-job OBJECT IDENTIFIER ::= { job 7 }
|
|
held-job-info OBJECT IDENTIFIER ::= { held-job 1 }
|
|
held-job-control OBJECT IDENTIFIER ::= { held-job 2 }
|
|
source-subsystem OBJECT IDENTIFIER ::= { device 2 }
|
|
spooler OBJECT IDENTIFIER ::= { source-subsystem 4 }
|
|
settings-spooler OBJECT IDENTIFIER ::= { spooler 1 }
|
|
pjl OBJECT IDENTIFIER ::= { processing-subsystem 5 }
|
|
mio OBJECT IDENTIFIER ::= { interface 3 }
|
|
mio1 OBJECT IDENTIFIER ::= { mio 1 }
|
|
mio2 OBJECT IDENTIFIER ::= { mio 2 }
|
|
mio3 OBJECT IDENTIFIER ::= { mio 3 }
|
|
io OBJECT IDENTIFIER ::= { source-subsystem 1 }
|
|
settings-io OBJECT IDENTIFIER ::= { io 1 }
|
|
ports OBJECT IDENTIFIER ::= { io 3 }
|
|
port1 OBJECT IDENTIFIER ::= { ports 1 }
|
|
tables OBJECT IDENTIFIER ::= { device 7 }
|
|
remote-procedure-call OBJECT IDENTIFIER ::= { device-system 13 }
|
|
settings-rpc OBJECT IDENTIFIER ::= { remote-procedure-call 1 }
|
|
status-rpc OBJECT IDENTIFIER ::= { remote-procedure-call 2 }
|
|
file-system OBJECT IDENTIFIER ::= { device-system 10 }
|
|
settings-file-system OBJECT IDENTIFIER ::= { file-system 1 }
|
|
file-systems OBJECT IDENTIFIER ::= { file-system 3 }
|
|
file-system2 OBJECT IDENTIFIER ::= { file-systems 2 }
|
|
file-system3 OBJECT IDENTIFIER ::= { file-systems 3 }
|
|
file-system4 OBJECT IDENTIFIER ::= { file-systems 4 }
|
|
resource-manager OBJECT IDENTIFIER ::= { device-system 12 }
|
|
mass-storage-resources OBJECT IDENTIFIER ::= { resource-manager 3 }
|
|
mass-storage-block-driver OBJECT IDENTIFIER ::= { device-system 15 }
|
|
settings-mass-storage-bd OBJECT IDENTIFIER ::= { mass-storage-block-driver 1 }
|
|
status-mass-storage-bd OBJECT IDENTIFIER ::= { mass-storage-block-driver 2 }
|
|
phd OBJECT IDENTIFIER ::= { interface 5 }
|
|
phd2 OBJECT IDENTIFIER ::= { phd 2 }
|
|
phd3 OBJECT IDENTIFIER ::= { phd 3 }
|
|
settings-prt-eng OBJECT IDENTIFIER ::= { print-engine 1 }
|
|
marking-agent-density OBJECT IDENTIFIER ::= { settings-prt-eng 9 }
|
|
status-prt-eng OBJECT IDENTIFIER ::= { print-engine 2 }
|
|
printer-calibration-dhalf OBJECT IDENTIFIER ::= { status-prt-eng 37 }
|
|
printer-calibration-cpr OBJECT IDENTIFIER ::= { status-prt-eng 38 }
|
|
intray OBJECT IDENTIFIER ::= { print-engine 3 }
|
|
settings-intray OBJECT IDENTIFIER ::= { intray 1 }
|
|
intrays OBJECT IDENTIFIER ::= { intray 3 }
|
|
intray1 OBJECT IDENTIFIER ::= { intrays 1 }
|
|
intray2 OBJECT IDENTIFIER ::= { intrays 2 }
|
|
intray3 OBJECT IDENTIFIER ::= { intrays 3 }
|
|
intray6 OBJECT IDENTIFIER ::= { intrays 6 }
|
|
outbin OBJECT IDENTIFIER ::= { print-engine 4 }
|
|
settings-outbin OBJECT IDENTIFIER ::= { outbin 1 }
|
|
outbins OBJECT IDENTIFIER ::= { outbin 3 }
|
|
outbin1 OBJECT IDENTIFIER ::= { outbins 1 }
|
|
outbin3 OBJECT IDENTIFIER ::= { outbins 3 }
|
|
outbin4 OBJECT IDENTIFIER ::= { outbins 4 }
|
|
marking-agent OBJECT IDENTIFIER ::= { print-engine 5 }
|
|
settings-marking-agent OBJECT IDENTIFIER ::= { marking-agent 1 }
|
|
ph OBJECT IDENTIFIER ::= { print-engine 7 }
|
|
ph-devices OBJECT IDENTIFIER ::= { ph 3 }
|
|
ph2 OBJECT IDENTIFIER ::= { ph-devices 2 }
|
|
ph3 OBJECT IDENTIFIER ::= { ph-devices 3 }
|
|
print-media OBJECT IDENTIFIER ::= { print-engine 8 }
|
|
settings-print-media OBJECT IDENTIFIER ::= { print-media 1 }
|
|
media-info OBJECT IDENTIFIER ::= { print-media 3 }
|
|
media1 OBJECT IDENTIFIER ::= { media-info 1 }
|
|
media2 OBJECT IDENTIFIER ::= { media-info 2 }
|
|
media3 OBJECT IDENTIFIER ::= { media-info 3 }
|
|
media4 OBJECT IDENTIFIER ::= { media-info 4 }
|
|
media5 OBJECT IDENTIFIER ::= { media-info 5 }
|
|
media6 OBJECT IDENTIFIER ::= { media-info 6 }
|
|
media7 OBJECT IDENTIFIER ::= { media-info 7 }
|
|
media8 OBJECT IDENTIFIER ::= { media-info 8 }
|
|
media9 OBJECT IDENTIFIER ::= { media-info 9 }
|
|
media10 OBJECT IDENTIFIER ::= { media-info 10 }
|
|
media13 OBJECT IDENTIFIER ::= { media-info 13 }
|
|
media14 OBJECT IDENTIFIER ::= { media-info 14 }
|
|
media15 OBJECT IDENTIFIER ::= { media-info 15 }
|
|
media16 OBJECT IDENTIFIER ::= { media-info 16 }
|
|
media17 OBJECT IDENTIFIER ::= { media-info 17 }
|
|
media18 OBJECT IDENTIFIER ::= { media-info 18 }
|
|
media19 OBJECT IDENTIFIER ::= { media-info 19 }
|
|
media20 OBJECT IDENTIFIER ::= { media-info 20 }
|
|
media21 OBJECT IDENTIFIER ::= { media-info 21 }
|
|
media22 OBJECT IDENTIFIER ::= { media-info 22 }
|
|
media23 OBJECT IDENTIFIER ::= { media-info 23 }
|
|
media24 OBJECT IDENTIFIER ::= { media-info 24 }
|
|
media32 OBJECT IDENTIFIER ::= { media-info 32 }
|
|
media-modes OBJECT IDENTIFIER ::= { print-media 4 }
|
|
media-size OBJECT IDENTIFIER ::= { print-media 5 }
|
|
accounting OBJECT IDENTIFIER ::= { device-system 16 }
|
|
printer-accounting OBJECT IDENTIFIER ::= { accounting 1 }
|
|
printed-media-usage OBJECT IDENTIFIER ::= { printer-accounting 1 }
|
|
printer-color-accounting OBJECT IDENTIFIER ::= { accounting 3 }
|
|
printed-media-color-usage OBJECT IDENTIFIER ::= { printer-color-accounting 1 }
|
|
printed-modes-accounting OBJECT IDENTIFIER ::= { accounting 4 }
|
|
printed-modes-usage OBJECT IDENTIFIER ::= { printed-modes-accounting 1 }
|
|
source-tray-accounting OBJECT IDENTIFIER ::= { accounting 5 }
|
|
source-tray-usage OBJECT IDENTIFIER ::= { source-tray-accounting 1 }
|
|
destination-bin-accounting OBJECT IDENTIFIER ::= { accounting 6 }
|
|
destination-bin-usage OBJECT IDENTIFIER ::= { destination-bin-accounting 1 }
|
|
consumables OBJECT IDENTIFIER ::= { print-engine 10 }
|
|
consumables-1 OBJECT IDENTIFIER ::= { consumables 1 }
|
|
consumable-status OBJECT IDENTIFIER ::= { consumables-1 1 }
|
|
consumables-status OBJECT IDENTIFIER ::= { consumables 5 }
|
|
consumables-life OBJECT IDENTIFIER ::= { consumables-status 1 }
|
|
print-meter OBJECT IDENTIFIER ::= { print-engine 11 }
|
|
printer-average OBJECT IDENTIFIER ::= { print-meter 1 }
|
|
webserver-proc-sub OBJECT IDENTIFIER ::= { processing-subsystem 9 }
|
|
settings-webserver OBJECT IDENTIFIER ::= { webserver-proc-sub 1 }
|
|
firmware-download OBJECT IDENTIFIER ::= { device-system 18 }
|
|
upgradable-devices OBJECT IDENTIFIER ::= { device-system 20 }
|
|
|
|
|
|
perm-store-init-occurred OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object will set the cAllPermDevices bit when a full perm
|
|
storage initialization occurs (as would be the case for a brand
|
|
new system or as a result of a powerup key sequence or
|
|
PE-TEST-POWERUP-KEY-SEQUENCE object request). If only one
|
|
device was initialized (as would be the case if a disk were
|
|
added to an existing system or a formatter were swapped out),
|
|
then only the appropriate collection bits will be returned. If
|
|
there are no collection bits set then this indicates that no
|
|
initialization took place."
|
|
::= { status-system 10 }
|
|
|
|
|
|
self-test OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eNotInASelfTest(1),
|
|
eNonDestructiveSelfTest(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Writing this object allows a device self test to be started.
|
|
Reading this object provides an indication what self-test is
|
|
currently executing, if any. Actual self-test operation is
|
|
device specific. A self test may not be allowed at any
|
|
arbitrary time. If the device supports the requested self test,
|
|
but can not start the execution of the self test when
|
|
requested, the device will respond with
|
|
<genErr>. If a non-destructive self
|
|
test is being started, the device will generate a response
|
|
before the self test is completed. RECOMMENDATION: If the
|
|
device is ready (i.e. the NOT-READY-PRINTER object does not
|
|
contain any items, except maybe being off-line) and is idle
|
|
(i.e. the NOT-IDLE object does not contain any items), this
|
|
request should always succeed. This provides a mechanism for
|
|
driver writers to always determine if the action will succeed
|
|
or not.
|
|
Additional information:
|
|
The eNonDestructiveSelfTest performs limited
|
|
testing on the printer and its attached paper handling
|
|
devices. After the self-test is complete a
|
|
configuration page is printed. The recommended
|
|
way to cause a configuration page to be printed is to
|
|
use the PRINT-INTERNAL-PAGE object.
|
|
|
|
Setting this object to eNonDestructiveSelfTest results in a status of <noError>
|
|
and a value of eNonDestructiveSelfTest being returned.
|
|
If the printer is not idle (whether printing an external job or printing
|
|
an internal page), this action will be delayed until the next job boundary.
|
|
|
|
See the PRINT-INTERNAL-PAGE object for more details."
|
|
::= { test 1 }
|
|
|
|
|
|
print-internal-page OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eNotPrintingAnInternalPage(1),
|
|
ePrintingAnUnknownInternalPage(2),
|
|
eDeviceDemoPage1ConfigurationPage(3),
|
|
eDeviceDemoPage2(4),
|
|
eDeviceDemoPage5ErrorLog(7),
|
|
eDeviceDemoPage6FileSystemDirectoryListing(8),
|
|
eDeviceDemoPage7MenuMap(9),
|
|
ePrintUsagePage(100),
|
|
eSuppliesPage(101),
|
|
eDevicePaperPathTest(254),
|
|
eDevicePageRegistrationPage(255),
|
|
ePCLFontList1(350),
|
|
ePSFontList(450)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Writing this object to a value other than
|
|
eNotPrintingAnInternalPage causes the device to attempt to
|
|
print an internally generated page. Reading this object
|
|
provides an indication what internally generated page is
|
|
currently being printed, if any. The actual page is device
|
|
specific. Some devices may support continuously printing an
|
|
internally generated page. Setting this object to
|
|
eNotPrintingAnInternalPage terminates continuously printing
|
|
internally generated pages. An internally generated page may
|
|
not be allowed to be printed at any arbitrary time; under what
|
|
conditions it will succeed or fail is device specific. If the
|
|
device supports the requested page, but can not start printing
|
|
the page when requested, the device will respond with
|
|
<genErr>. RECOMMENDATION: If the
|
|
device is ready (i.e. the NOT-READY-PRINTER object does not
|
|
contain any items, except maybe being off-line) and is idle
|
|
(i.e. the NOT-IDLE object does not contain any items), this
|
|
request should always succeed. This provides a mechanism for
|
|
driver writers to always determine if the action will succeed
|
|
or not.
|
|
Additional information:
|
|
Previous products used
|
|
ePCLDemoPage1ConfigurationPage(300) for the
|
|
Configuration or Self Test page. This product uses
|
|
eDeviceDemoPage1ConfigurationPage(3).
|
|
|
|
LaserJet 8150 does not support continuously printing a demo page.
|
|
|
|
When this object is set to a valid value, the status returned is <noError>
|
|
and the value returned is ePrintingAnUnknownInternalPage. If the printer
|
|
is idle, the page will be printed immediately. If the printer is
|
|
currently printing another job, the internal page requested will not print
|
|
until that job is finished.
|
|
|
|
Setting this object to a valid value causes the
|
|
desired page to be formatted and put in the printer's
|
|
print queue. While the page is being formatted a get on this object will
|
|
return the value ePrintingAnUnknownInternalPage. Once the page (or pages)
|
|
is finished being formatted, this object returns a value of
|
|
eNotPrintingAnInternalPage, even though the page may not have finished
|
|
being printed.
|
|
|
|
Setting this object multiple times will queue up the requests, but only
|
|
a limited number will be queued. Once the queue is full, additional
|
|
requests will be ignored."
|
|
::= { test 2 }
|
|
|
|
|
|
localization-languages-supported OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The list of languages supported by the device. The languages
|
|
are primarily, but not limited to, two character codes from ISO
|
|
639, each separated by a comma character.
|
|
Additional information:
|
|
This string will always be in the Roman-8 character set.
|
|
See prtLocalizationLanguage for details about each language value."
|
|
::= { status-system 52 }
|
|
|
|
|
|
localization-countries-supported OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The list of countries supported by the device. The countries
|
|
are primarily, but not limited to, two character codes from ISO
|
|
3166, each separated by a comma character.
|
|
Additional information:
|
|
This string will always be in the Roman-8 character set.
|
|
See prtLocalizationCountry for details about each country value."
|
|
::= { status-system 53 }
|
|
|
|
|
|
background-status-msg-line1-part1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The string displayed on the device's front panel in place of
|
|
the printer's built-in background status string. An example
|
|
built-in background status string is '00 READY'.
|
|
Additional information:
|
|
The display size for the LaserJet 8150 printers is 2 X 16.
|
|
The value of this object and the current value of
|
|
BACKGROUND-STATUS-MSG-LINE2-PART1 are displayed
|
|
together on the 2-line display, but they must
|
|
be set independently. If line 2 has been set, and the
|
|
next message to be displayed only requires line 1,
|
|
BACKGROUND-STATUS-MSG-LINE2-PART1 must be set to the
|
|
null string to clear it.
|
|
This object allows a message to be displayed when
|
|
it is the highest priority message. Setting this
|
|
object does not guarantee the message will be
|
|
displayed; and reading it returns the value last
|
|
written, not the currently displayed message (use
|
|
prtConsoleDisplayBufferText to read the
|
|
display).
|
|
The priority assigned for displaying this message
|
|
is one lower than the READY message. In other words,
|
|
the only message that can be replaced by these
|
|
objects is the READY message.
|
|
To clear the message, write a null string to both
|
|
this object and BACKGROUND-STATUS-MSG-LINE2-PART1.
|
|
Additional information:
|
|
The display size for the LaserJet 8150 printers is 2 X 16.
|
|
The value of this object and the current value of
|
|
BACKGROUND-STATUS-MSG-LINE2-PART1 are displayed
|
|
together on the 2-line display, but they must
|
|
be set independently. If line 2 has been set, and the
|
|
next message to be displayed only requires line 1,
|
|
BACKGROUND-STATUS-MSG-LINE2-PART1 must be set to the
|
|
null string to clear it.
|
|
This object allows a message to be displayed when
|
|
it is the highest priority message. Setting this
|
|
object does not guarantee the message will be
|
|
displayed; and reading it returns the value last
|
|
written, not the currently displayed message (use
|
|
prtConsoleDisplayBufferText to read the
|
|
display).
|
|
The priority assigned for displaying this message
|
|
is one lower than the READY message. In other words,
|
|
the only message that can be replaced by these
|
|
objects is the READY message.
|
|
To clear the message, write a null string to both
|
|
this object and BACKGROUND-STATUS-MSG-LINE2-PART1."
|
|
::= { background-message1 1 }
|
|
|
|
|
|
background-status-msg-line2-part1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The string displayed on the device's front panel in place of
|
|
the printer's built-in background status string. An example
|
|
built-in background status string is '00 READY'.
|
|
Additional information:
|
|
See BACKGROUND-STATUS-MSG-LINE1-PART1
|
|
Additional information:
|
|
See BACKGROUND-STATUS-MSG-LINE1-PART1"
|
|
::= { background-message2 1 }
|
|
|
|
|
|
control-panel-button-press OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eGoButton(1),
|
|
eMenuPlusButton(2),
|
|
eMenuMinusButton(3),
|
|
eItemPlusButton(4),
|
|
eItemMinusButton(5),
|
|
eValuePlusButton(6),
|
|
eValueMinusButton(7),
|
|
eSelectButton(8),
|
|
eCancelJobButton(9),
|
|
ePauseResumeButton(10),
|
|
eUpArrowButton(11),
|
|
eDownArrowButton(12),
|
|
eBackButton(13),
|
|
eQuestionMarkButton(14),
|
|
eClearButton(15),
|
|
eNumericButton0(16),
|
|
eNumericButton1(17),
|
|
eNumericButton2(18),
|
|
eNumericButton3(19),
|
|
eNumericButton4(20),
|
|
eNumericButton5(21),
|
|
eNumericButton6(22),
|
|
eNumericButton7(23),
|
|
eNumericButton8(24),
|
|
eNumericButton9(25),
|
|
eRotateButton(26),
|
|
eInfoButton(27),
|
|
eMenuButton(28),
|
|
eStopButton(29)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Writing this object simulates pressing a button on the control
|
|
panel. Reading it will return the last key pressed either on
|
|
the control panel or via PML. The device POS will specify which
|
|
keys are supported."
|
|
::= { status-system 60 }
|
|
|
|
|
|
control-panel-display-contents-change-counter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A counter which increments whenever the contents of the front
|
|
panel display changes. This object is implemented as a 32-bit
|
|
signed integer which rolls over to zero when it reaches a
|
|
maximum value."
|
|
::= { status-system 63 }
|
|
|
|
|
|
control-panel-display-contents-crc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Reading this object returns a 32-bit Cyclical Redundancy Check
|
|
(CRC) which represents the current contents of the display.
|
|
Additional information:
|
|
This object has been implimented as an 8-bit CRC for
|
|
this product."
|
|
::= { status-system 64 }
|
|
|
|
|
|
control-panel-display-graphical-contents OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Reading this object returns a graphical file format image
|
|
representing the current pixel content of the display. The
|
|
device POS will specify the expected screen resolution, color
|
|
depth of the display and graphics file format for a given
|
|
product (eg. 160x64x1 GIF format OR 640x240x4 JPEG format). If
|
|
the image is large enough that it needs to be returned in
|
|
multiple objects then each array object will contain a portion
|
|
of the image. The image will then need to be reconstructed by a
|
|
host application. An application that needs to determine if
|
|
their is an additional object to be retreived will need to
|
|
perform a GETNEXT operation until there are no more objects in
|
|
the sub-tree.
|
|
Additional information:
|
|
This object returns a GIF image that represents the
|
|
current contents of the 160x64x1 control panel display. Most
|
|
display images require more than one instance of this object
|
|
in order to retreive the complete GIF image."
|
|
::= { control-panel-display 1 }
|
|
|
|
|
|
|
|
|
|
energy-star OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the Energy Star sleep value. If the value
|
|
is greater than zero, then the device will go into energy
|
|
saving sleep mode after the print engine has been idle for the
|
|
number of seconds specified by this object. A value of zero
|
|
means Energy Star is disabled and the device will not go to
|
|
sleep based on print engine idle time. The value must be
|
|
non-negative.
|
|
Additional information:
|
|
Returns or changes the Energy Star sleep value.
|
|
The device will go into energy saving sleep
|
|
mode after the print engine has been idle for
|
|
the number of seconds specified by this
|
|
object.
|
|
|
|
LaserJet 4550 and LaserJet 4100 supports values of 0, 60, 900,
|
|
1800, 3600, 7200, 14400 seconds. A value of 0 means
|
|
never enter sleep mode based on the print engine
|
|
idle time. Setting to an unsupported value causes
|
|
the printer to substitute a value (listed
|
|
below) and to return <noError>
|
|
status. Setting this value when the printer is in
|
|
sleep mode will not cause it to wakeup unless it is
|
|
set to 0.
|
|
|
|
The values are as follow:
|
|
<=0 snap to 0
|
|
>=1 and <= 479 snap to 60 (1 minute)
|
|
>=480 and <= 1349 snap to 900 (15 minutes)
|
|
>=1350 and <= 2699 snap to 1800 (30 minutes)
|
|
>=2700 and <= 5399 snap to 3600 (1 hour)
|
|
>=5400 and <= 10799 snap to 7200 (2 hours)
|
|
>=10800 snap to 14400 (4 hours)."
|
|
::= { settings-system 1 }
|
|
|
|
|
|
sleep-mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eFalse(1),
|
|
eTrue(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns eTrue if the device is in energy saving sleep mode,
|
|
otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes
|
|
the device to wake up, if it is in sleep mode. Setting
|
|
SLEEP-MODE to eTrue causes the device to go into sleep mode.
|
|
Additional information:
|
|
This object returns eTrue if the device is in
|
|
energy saving sleep mode, otherwise it returns eFalse.
|
|
Setting this object to eTrue while the printer
|
|
is awake will not change the printer's current state
|
|
and will return <genErr>
|
|
status. NOTE: This object should behave this way
|
|
when the printer does not have an instant-on fuser.
|
|
Setting this object to eTrue while printer is already
|
|
in Sleep Mode will not change the printer's
|
|
current state and will return <noError> status.
|
|
Setting this object to eFalse while printer is already
|
|
awake will not change the printer's current state and
|
|
will return <noError> status.
|
|
Setting this object to eFalse while the printer is
|
|
asleep causes the device to wake up. "
|
|
::= { settings-system 2 }
|
|
|
|
|
|
powersave-mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEnergyStar(1),
|
|
eBlueAngel(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"If this object is set to eEnergyStar, the device will go into a
|
|
sleep mode that will meet EnergyStar power consumption
|
|
requirements after the time specified by the ENERGY-STAR
|
|
object. If this object is set to eBlueAngel, the device will go
|
|
into a sleep mode the will meet BlueAngel power consumption
|
|
requirements after the time specified by the ENERGY-STAR
|
|
object. Changing this object will not reset the powersave
|
|
timer.
|
|
Additional information:
|
|
"
|
|
::= { settings-system 33 }
|
|
|
|
|
|
on-off-line OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOnline(1),
|
|
eOffline(2),
|
|
eOfflineAtEndOfJob(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"To bring the PDL processing sub-system on or off line. If the
|
|
device is a printer, then the printer does not process print
|
|
job data when the printer is off line. PML communication
|
|
persists.
|
|
Additional information:
|
|
When the printer is in the Offline state,
|
|
printing will stop as soon as possible (no more sheets
|
|
of media are pulled from input trays). The I/O
|
|
is taken offline also.
|
|
|
|
Setting to eOnline has the following affect:
|
|
Printer will immediately go to or remain in the Online
|
|
state; <noError> status is returned.
|
|
If the printer's current state
|
|
is Offline with a pending error condition that
|
|
prevents the printer from going to the Online
|
|
state, the printer will remain in the Offline state;
|
|
<genErr> status is returned
|
|
|
|
Setting to eOffline has the following affect:
|
|
Printer will immediately go to or remain in the
|
|
Offline state; <noError> status is returned.
|
|
If pages are being printed, those pages will complete
|
|
with the printer in the Offline state.
|
|
|
|
Setting to eOfflineAtEndOfJob has the following
|
|
affect:
|
|
If not in a job or already in the Offline state, the
|
|
printer will immediately go to or remain in the
|
|
Offline state; <noError> status is returned.
|
|
If in a job and the current state is Online, the
|
|
printer will remain in the Online state, with the
|
|
value of this object as eOfflineAtEndOfJob, until the
|
|
end of the job; <noError> status is returned. At the end of
|
|
the job, the printer goes to the Offline state and the
|
|
value of this object becomes eOffline.
|
|
Setting this object to eOffline or eOnline before the
|
|
end of the job causes the action for that value to be
|
|
taken immediately."
|
|
::= { status-system 5 }
|
|
|
|
|
|
continue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eInitiateAction(1)
|
|
}
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A device can support a class of errors called continuable
|
|
errors. When a continuable error is encountered, the device
|
|
requires a continue event to occur before the device will
|
|
continue operation. One continue event is setting the CONTINUE
|
|
object to eInitiateAction. Devices can support other continue
|
|
events, like auto-continue. A continue event causes the
|
|
continuable error to be acknowledged, thus allowing the device
|
|
to continue. Each device needs to list the continuable errors.
|
|
If the device doesn't currently have an unacknowledged
|
|
continuable error, the response will contain
|
|
<genErr>.
|
|
Additional information:
|
|
See the CLEARABLE-WARNING and AUTO-CONTINUE objects for the
|
|
errors that this object will clear."
|
|
::= { status-system 6 }
|
|
|
|
|
|
auto-continue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOff(1),
|
|
eOn(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates if the device will automatically continue after
|
|
encountering a continuable error. If AUTO-CONTINUE is set to
|
|
eOn, the device will automatically generate continue event to
|
|
acknowledge continuable errors. If AUTO-CONTINUE is set to
|
|
eOff, then some other continue event will have to acknowledge
|
|
the continuable error.
|
|
Additional information:
|
|
If this is set to eOn the device displays an
|
|
error message and goes offline for ten seconds. After ten seconds the
|
|
printer automatically returns to the online state.
|
|
|
|
If this is set to eOff then the device displays an error message and
|
|
goes offline. It remains offline until the operator presses the GO key or
|
|
until the CONTINUE object is set.
|
|
|
|
If the printer is not idle, the new value may not take effect
|
|
until a job boundary is reached. If a get is done on this object before
|
|
the job boundary is reached, the value last set will be returned."
|
|
::= { status-system 7 }
|
|
|
|
|
|
simm1-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in SIMM
|
|
slot 1.
|
|
eEmpty means the device did not detect any option installed
|
|
in the interface slot.
|
|
eUnknown means the device doesn't recognize the installed
|
|
option.
|
|
eUnSupported means the device recognizes the installed
|
|
option, but does not support the option.
|
|
eReadOnlyMemory means the installed option contains ROM
|
|
Ics.
|
|
eVolatileRandomAccessMemory means the installed option
|
|
contains RAM ICs that loose data when the power is
|
|
turned off.
|
|
eNonVolatileRandomAccessMemory means that the installed
|
|
option contains RAM ICs that do not loose data when the
|
|
power is turned off.
|
|
eFlashMemory means that the installed option contains a
|
|
type of non-volatile RAM that needs to be erased before
|
|
it can be written.
|
|
eDiskDrive means the installed option contains a disk
|
|
drive.
|
|
eRamRom means the installed option contains both volatile
|
|
random access memory and read only memory.
|
|
eInputPHD means the installed option is an input paper
|
|
handling device.
|
|
eOutputPHD means the installed option is an output paper
|
|
handling device. eIOCard means the installed option is
|
|
an I/O card.
|
|
Additional information:
|
|
This object is used for describing DIMMs instead
|
|
of SIMMs on LaserJet 8150. eRamRom is used to denote LaserJet 8150's combo simm."
|
|
::= { simm1 4 }
|
|
|
|
|
|
simm1-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of the SIMM installed in
|
|
SIMM slot 1. The capacity is dependent on the type of option,
|
|
as indicated by the SIMM1-TYPE object. This object has no
|
|
meaning if the installed option type is eUnknown or
|
|
eReadOnlyMemory. This object contains the size, in bytes, if
|
|
the installed option type is eVolatileRandomAccessMemory,
|
|
eNonVolatileRandomAccessMemory, eFlashMemory, or eDiskDrive. If
|
|
the type of the installed option is eRamRom, this object
|
|
contains the size, in bytes, of the random access memory. If
|
|
the type of the installed option is eInputPHD, the capacity
|
|
indicates the number of input trays supported by the installed
|
|
option. If the type of the installed option is eOutputPHD, the
|
|
capacity indicates the number of output bins supported by the
|
|
installed option. If the type of the installed option is
|
|
eIOCard, the capacity indicates the number of logical I/O ports
|
|
supported by the I/O card.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed option in bytes. This object is not
|
|
supported unless the SIMM1-TYPE type is
|
|
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
|
For eRamRom only the size of the Ram portion of the SIMM
|
|
is returned."
|
|
::= { simm1 5 }
|
|
|
|
|
|
simm1-bank1-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 1
|
|
of SIMM slot 1. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm1-bank1 1 }
|
|
|
|
|
|
simm1-bank1-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 1 of the SIMM
|
|
installed in SIMM slot 1. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM1-BANK1-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm1-bank1 2 }
|
|
|
|
|
|
simm1-bank2-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 2
|
|
of SIMM slot 1. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm1-bank2 1 }
|
|
|
|
|
|
simm1-bank2-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 2 of the SIMM
|
|
installed in SIMM slot 1. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM1-BANK2-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm1-bank2 2 }
|
|
|
|
|
|
simm2-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in SIMM
|
|
slot 2. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing DIMMs instead
|
|
of SIMMs on LaserJet 8150. eRamRom is used to denote LaserJet 8150's combo simm."
|
|
::= { simm2 4 }
|
|
|
|
|
|
simm2-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of the SIMM installed in
|
|
SIMM slot 2. See SIMM1-CAPACITY for a description.
|
|
Additional information:
|
|
This object is used for describing DIMMs instead
|
|
of SIMMs on LaserJet 8150. Returns an indication of the capacity of the
|
|
installed option in bytes. This object is not
|
|
supported unless the SIMM2-TYPE type is
|
|
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
|
For eRamRom only the size of the Ram portion of the
|
|
SIMM is returned."
|
|
::= { simm2 5 }
|
|
|
|
|
|
simm2-bank1-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 1
|
|
of SIMM slot 2. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm2-bank1 1 }
|
|
|
|
|
|
simm2-bank1-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 1 of the SIMM
|
|
installed in SIMM slot 2. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM2-BANK1-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm2-bank1 2 }
|
|
|
|
|
|
simm2-bank2-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 2
|
|
of SIMM slot 2. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm2-bank2 1 }
|
|
|
|
|
|
simm2-bank2-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 2 of the SIMM
|
|
installed in SIMM slot 2. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM2-BANK2-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm2-bank2 2 }
|
|
|
|
|
|
simm3-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in SIMM
|
|
slot 3. See SIMM1-TYPE for a description."
|
|
::= { simm3 4 }
|
|
|
|
|
|
simm3-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of the SIMM installed in
|
|
SIMM slot 3. See SIMM1-CAPACITY for a description.
|
|
Additional information:
|
|
This object is used for describing DIMMs instead
|
|
of SIMMs on LaserJet 8150. Returns an indication of the capacity of the
|
|
installed option in bytes. This object is not
|
|
supported unless the SIMM3-TYPE type is
|
|
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
|
For eRamRom only the size of the Ram portion of the
|
|
simm is returned."
|
|
::= { simm3 5 }
|
|
|
|
|
|
simm3-bank1-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 1
|
|
of SIMM slot 3. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm3-bank1 1 }
|
|
|
|
|
|
simm3-bank1-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 1 of the SIMM
|
|
installed in SIMM slot 3. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM3-BANK1-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm3-bank1 2 }
|
|
|
|
|
|
simm3-bank2-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 2
|
|
of SIMM slot 3. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm3-bank2 1 }
|
|
|
|
|
|
simm3-bank2-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 2 of the SIMM
|
|
installed in SIMM slot 3. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM3-BANK2-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm3-bank2 2 }
|
|
|
|
|
|
simm4-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in SIMM
|
|
slot 4. See SIMM1-TYPE for a description."
|
|
::= { simm4 4 }
|
|
|
|
|
|
simm4-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of the SIMM installed in
|
|
SIMM slot 4. See SIMM1-CAPACITY for a description.
|
|
Additional information:
|
|
This object is used for describing DIMMs instead
|
|
of SIMMs on LaserJet 8150. Returns an indication of the capacity of the
|
|
installed option in bytes. This object is not
|
|
supported unless the SIMM4-TYPE type is
|
|
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
|
For eRamRom only the size of the Ram portion of the
|
|
simm is returned."
|
|
::= { simm4 5 }
|
|
|
|
|
|
simm4-bank1-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 1
|
|
of SIMM slot 4. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm4-bank1 1 }
|
|
|
|
|
|
simm4-bank1-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 1 of the SIMM
|
|
installed in SIMM slot 4. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM4-BANK1-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm4-bank1 2 }
|
|
|
|
|
|
simm4-bank2-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 2
|
|
of SIMM slot 4. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm4-bank2 1 }
|
|
|
|
|
|
simm4-bank2-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 2 of the SIMM
|
|
installed in SIMM slot 4. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM4-BANK2-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm4-bank2 2 }
|
|
|
|
|
|
simm5-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in SIMM
|
|
slot 5. See SIMM1-TYPE for a description."
|
|
::= { simm5 4 }
|
|
|
|
|
|
simm5-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of the SIMM installed in
|
|
SIMM slot 5. See SIMM1-CAPACITY for a description.
|
|
Additional information:
|
|
This object is used for describing DIMMs instead
|
|
of SIMMs on LaserJet 8150. Returns an indication of the capacity of the
|
|
installed option in bytes. This object is not
|
|
supported unless the SIMM5-TYPE type is
|
|
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
|
For eRamRom only the size of the Ram portion of the
|
|
simm is returned."
|
|
::= { simm5 5 }
|
|
|
|
|
|
simm5-bank1-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 1
|
|
of SIMM slot 5. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm5-bank1 1 }
|
|
|
|
|
|
simm5-bank1-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 1 of the SIMM
|
|
installed in SIMM slot 5. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM5-BANK1-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm5-bank1 2 }
|
|
|
|
|
|
simm5-bank2-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eUnSupported(3),
|
|
eReadOnlyMemory(4),
|
|
eVolatileRandomAccessMemory(5),
|
|
eFlashMemory(7),
|
|
eRamRom(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in Bank 2
|
|
of SIMM slot 5. See SIMM1-TYPE for a description.
|
|
Additional information:
|
|
This object is used for describing the type
|
|
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
|
::= { simm5-bank2 1 }
|
|
|
|
|
|
simm5-bank2-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of Bank 2 of the SIMM
|
|
installed in SIMM slot 5. See SIMM1-CAPACITY for a
|
|
description.
|
|
Additional information:
|
|
Returns an indication of the capacity of the
|
|
installed bank option in bytes. This object is not
|
|
supported unless the SIMM5-BANK2-TYPE type is
|
|
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
|
eSDRandomAccessMemory, eSRandomAccessMemory,
|
|
or eFPMRandomAccessMemory."
|
|
::= { simm5-bank2 2 }
|
|
|
|
|
|
cancel-job OBJECT-TYPE
|
|
SYNTAX INTEGER(0..32767)
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Cancels the print job whose ID matches the value written to the
|
|
CANCEL-JOB object. The host first learns the job ID using the
|
|
CURRENT-JOB-PARSING-ID command. If the printer has completely
|
|
processed the job, the printer responds with
|
|
<badValue>. If the value of the
|
|
CURRENT-JOB-PARSING-ID is smaller than the value written to the
|
|
CANCEL-JOB object, then the printer responds with
|
|
<badValue>. When read, returns the value
|
|
of the last job ID what was canceled, or -1 to indicate no job
|
|
has been canceled.
|
|
Additional information:
|
|
If the value written matches the ID of a job that is
|
|
currently being canceled (for any reason),
|
|
the printer responds with <noError>.
|
|
LaserJet 8150 uses job ID's in the range of 0..32767.
|
|
Because the ID number can wrap to zero,
|
|
CURRENT-JOB-PARSING-ID may be smaller than the value
|
|
written to this object; when this occurs, no error
|
|
will result as long as the ID is for a currently
|
|
processing job. This object is write only, so the
|
|
comment in the general description stating the
|
|
job ID or -1 will be returned on a read does not
|
|
apply."
|
|
::= { settings-job 2 }
|
|
|
|
|
|
os-execute-file OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object's input is a null-terminated string representing a
|
|
fully-qualified path name for an executable file. This object
|
|
causes the file to be executed by the OS.
|
|
Additional information:
|
|
This object's input is a null-terminated string of two or
|
|
more whitespace-separated tokens. The first token is a path
|
|
to a directory to make the current working directory. The
|
|
second token is a path to an executable file to be executed.
|
|
Any remaining whitespace-separated tokens are optional and
|
|
will be passed as parameters to the executable. The paths
|
|
to the directory and executable can be either PJL style
|
|
(e.g., 1:\app\example) or UNIX-style (e.g.,
|
|
/hpmnt/dsk_ide1a/app/example). The executable is run in
|
|
a separate process."
|
|
::= { operating-system 1 }
|
|
|
|
|
|
form-feed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eInitiateAction(1)
|
|
}
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Instructs the PDL processing sub-system to finishing processing
|
|
the current page of the current job. Form feed is also known as
|
|
close page or eject page. If the PDL processing sub-system is
|
|
in a FORM-FEED-NEEDED state, this causes the device to flush or
|
|
finish processing the current page of the current job. If the
|
|
device is not in the FORM-FEED-NEEDED state, an
|
|
<genErr> will occur."
|
|
::= { settings-pdl 5 }
|
|
|
|
|
|
form-feed-needed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eFalse(1),
|
|
eTrue(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates if the PDL processing sub-system has made marks on
|
|
the current page and the source subsystem has been idle for a
|
|
device specific amount of time.
|
|
Additional information:
|
|
LaserJet 8150 will set this object to eTrue when it
|
|
has made marks on the current page, the IO-TIMEOUT has
|
|
expired while PCL was running in `backward-compatibility
|
|
mode' (which is caused by jobs consisting purely of PCL
|
|
data with no prepended PJL commands), and no data is pending
|
|
on another I/O. Once it is set to eTrue, more data on the
|
|
same I/O will cause this object to be set to eFalse, until
|
|
the above conditions are met again."
|
|
::= { status-pdl 2 }
|
|
|
|
|
|
|
|
|
|
error-log-clear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eClearErrorLog(1)
|
|
}
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Setting this object clears all the entries in the error log
|
|
sub-tree.
|
|
Additional information:
|
|
Setting this object removes all errors that have been
|
|
stored in the printer's non-volatile memory."
|
|
::= { status-system 38 }
|
|
|
|
|
|
clearable-warning OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOn(2),
|
|
eJob(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or controls how the device will track clearable
|
|
warnings. A clearable warning indicates a transient event in
|
|
the device. The device will continue after the transient event
|
|
occurs. If CLEARABLE-WARNING is eOff, the device does not track
|
|
clearable warnings. If CLEARABLE-WARNING is eOn, all clearable
|
|
warnings will be tracked until cleared (acknowledged). If
|
|
CLEARABLE-WARNING is eJob, a clearable warning generated due to
|
|
an event that occurs because of the print job being processed
|
|
will be automatically cleared when the device has finished
|
|
processing the job. Example clearable warning events include
|
|
the device altering resolution or page protection due to memory
|
|
constraints. The POS will document what transient events are
|
|
treated as clearable warnings.
|
|
Additional information:
|
|
If set to eOn, the warning is displayed until the GO key
|
|
is pressed or the CONTINUE object is set.
|
|
|
|
If set to eJob, the warning is displayed until the end of the job in which
|
|
it was generated."
|
|
::= { settings-job 1 }
|
|
|
|
|
|
error1-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 1
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
This item contains the engine
|
|
page count when the error occurred.
|
|
|
|
If there is currently no error entry for this object, a '0' will be returned.
|
|
Note that '0' may also be returned when there is a valid error, but a current
|
|
page count was unavailable. If ERROR1-CODE object also returns '0', then
|
|
an error has not yet been logged for this object.
|
|
|
|
See ERROR1-CODE for an explanation of the order used for storing errors."
|
|
::= { error1 1 }
|
|
|
|
|
|
error1-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
Returns a device specific error code.
|
|
If the error code returned is '0', then the printer has not yet logged an
|
|
error for this object.
|
|
When the maximum number of errors is reached (30 on LaserJet printers), and
|
|
a new error occurs, the error in ERROR1-CODE will be replaced by the
|
|
one in ERROR2-CODE, and so on until the last error object will be given
|
|
the value of the new error.
|
|
|
|
The error number is returned in the upper 16 bits.
|
|
If it is 68, 69, 79, or 80, then the sub code is returned in the lower
|
|
16 bits (eg. 68 001C, where the subcode is already a hexadecimal value).
|
|
If the error number is any other number, then the 1st sub code (XX)
|
|
will be in bits 15-8 and the 2nd sub code (YY) will be in bits 7-0 (eg.
|
|
55.04.02) where XX=04 and YY=02).
|
|
|
|
|
|
Example: If the error is 68 001A, then the value returned will be 4456474.
|
|
To break it down: 4456474 = 0x0044001A
|
|
The upper 16 bits: 0x0044 = 68
|
|
The lower 16 bits: 0x001A = 001A
|
|
Which is the error: 68 001A
|
|
|
|
Example: If the error is 55.04.241, then the error code will be 3605745.
|
|
To break it down: 3605745 = 0x003704F1
|
|
The upper 16 bits: 0x0037 = 55
|
|
The upper byte of the lower 16 bits: 0x04 = 04
|
|
The lower byte of the lower 16 bits: 0xF1 = 241
|
|
Which is the error: 55.04.241"
|
|
::= { error1 2 }
|
|
|
|
|
|
error2-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 2
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error2 1 }
|
|
|
|
|
|
error2-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error2 2 }
|
|
|
|
|
|
error3-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 3
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error3 1 }
|
|
|
|
|
|
error3-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error3 2 }
|
|
|
|
|
|
error4-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 4
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error4 1 }
|
|
|
|
|
|
error4-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error4 2 }
|
|
|
|
|
|
error5-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 5
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error5 1 }
|
|
|
|
|
|
error5-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error5 2 }
|
|
|
|
|
|
error6-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 6
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error6 1 }
|
|
|
|
|
|
error6-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error6 2 }
|
|
|
|
|
|
error7-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 7
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error7 1 }
|
|
|
|
|
|
error7-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error7 2 }
|
|
|
|
|
|
error8-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 8
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error8 1 }
|
|
|
|
|
|
error8-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error8 2 }
|
|
|
|
|
|
error9-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 9
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error9 1 }
|
|
|
|
|
|
error9-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error9 2 }
|
|
|
|
|
|
error10-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 10
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error10 1 }
|
|
|
|
|
|
error10-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error10 2 }
|
|
|
|
|
|
error11-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 11
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error11 1 }
|
|
|
|
|
|
error11-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error11 2 }
|
|
|
|
|
|
error12-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 12
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error12 1 }
|
|
|
|
|
|
error12-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error12 2 }
|
|
|
|
|
|
error13-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 13
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error13 1 }
|
|
|
|
|
|
error13-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error13 2 }
|
|
|
|
|
|
error14-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 14
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error14 1 }
|
|
|
|
|
|
error14-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error14 2 }
|
|
|
|
|
|
error15-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 15
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error15 1 }
|
|
|
|
|
|
error15-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error15 2 }
|
|
|
|
|
|
error16-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 16
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error16 1 }
|
|
|
|
|
|
error16-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error16 2 }
|
|
|
|
|
|
error17-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 17
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error17 1 }
|
|
|
|
|
|
error17-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error17 2 }
|
|
|
|
|
|
error18-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 18
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error18 1 }
|
|
|
|
|
|
error18-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error18 2 }
|
|
|
|
|
|
error19-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 19
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error19 1 }
|
|
|
|
|
|
error19-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error19 2 }
|
|
|
|
|
|
error20-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 20
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error20 1 }
|
|
|
|
|
|
error20-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error20 2 }
|
|
|
|
|
|
error21-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 21
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error21 1 }
|
|
|
|
|
|
error21-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error21 2 }
|
|
|
|
|
|
error22-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 22
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error22 1 }
|
|
|
|
|
|
error22-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error22 2 }
|
|
|
|
|
|
error23-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 23
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error23 1 }
|
|
|
|
|
|
error23-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error23 2 }
|
|
|
|
|
|
error24-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 24
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error24 1 }
|
|
|
|
|
|
error24-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error24 2 }
|
|
|
|
|
|
error25-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 25
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error25 1 }
|
|
|
|
|
|
error25-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error25 2 }
|
|
|
|
|
|
error26-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 26
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error26 1 }
|
|
|
|
|
|
error26-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error26 2 }
|
|
|
|
|
|
error27-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 27
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error27 1 }
|
|
|
|
|
|
error27-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error27 2 }
|
|
|
|
|
|
error28-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 28
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error28 1 }
|
|
|
|
|
|
error28-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error28 2 }
|
|
|
|
|
|
error29-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 29
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error29 1 }
|
|
|
|
|
|
error29-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error29 2 }
|
|
|
|
|
|
error30-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 30
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error30 1 }
|
|
|
|
|
|
error30-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error30 2 }
|
|
|
|
|
|
error31-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 31
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error31 1 }
|
|
|
|
|
|
error31-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error31 2 }
|
|
|
|
|
|
error32-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 32
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error32 1 }
|
|
|
|
|
|
error32-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error32 2 }
|
|
|
|
|
|
error33-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 33
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error33 1 }
|
|
|
|
|
|
error33-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error33 2 }
|
|
|
|
|
|
error34-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 34
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error34 1 }
|
|
|
|
|
|
error34-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error34 2 }
|
|
|
|
|
|
error35-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 35
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error35 1 }
|
|
|
|
|
|
error35-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error35 2 }
|
|
|
|
|
|
error36-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 36
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error36 1 }
|
|
|
|
|
|
error36-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error36 2 }
|
|
|
|
|
|
error37-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 37
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error37 1 }
|
|
|
|
|
|
error37-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error37 2 }
|
|
|
|
|
|
error38-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 38
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error38 1 }
|
|
|
|
|
|
error38-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error38 2 }
|
|
|
|
|
|
error39-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 39
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error39 1 }
|
|
|
|
|
|
error39-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error39 2 }
|
|
|
|
|
|
error40-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 40
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error40 1 }
|
|
|
|
|
|
error40-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error40 2 }
|
|
|
|
|
|
error41-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 41
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error41 1 }
|
|
|
|
|
|
error41-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error41 2 }
|
|
|
|
|
|
error42-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 42
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error42 1 }
|
|
|
|
|
|
error42-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error42 2 }
|
|
|
|
|
|
error43-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 43
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error43 1 }
|
|
|
|
|
|
error43-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error43 2 }
|
|
|
|
|
|
error44-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 44
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error44 1 }
|
|
|
|
|
|
error44-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error44 2 }
|
|
|
|
|
|
error45-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 45
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error45 1 }
|
|
|
|
|
|
error45-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error45 2 }
|
|
|
|
|
|
error46-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 46
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error46 1 }
|
|
|
|
|
|
error46-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error46 2 }
|
|
|
|
|
|
error47-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 47
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error47 1 }
|
|
|
|
|
|
error47-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error47 2 }
|
|
|
|
|
|
error48-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 48
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error48 1 }
|
|
|
|
|
|
error48-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error48 2 }
|
|
|
|
|
|
error49-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 49
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error49 1 }
|
|
|
|
|
|
error49-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error49 2 }
|
|
|
|
|
|
error50-time-stamp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains some sort of time stamp indicating when error 50
|
|
occurred. Example time stamps include the actual time the error
|
|
occurred (in seconds since Jan. 1, 1970), and the total engine
|
|
page count. The device POS documents the meaning of the time
|
|
stamp.
|
|
Additional information:
|
|
See ERROR1-TIME-STAMP."
|
|
::= { error50 1 }
|
|
|
|
|
|
error50-code OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains a device specific error code. Each device POS should
|
|
list what errors are logged to the error log and the meaning of
|
|
each supported error code value.
|
|
Additional information:
|
|
See ERROR1-CODE."
|
|
::= { error50 2 }
|
|
|
|
|
|
channelprinteralert OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Identifies the values of prtAlertIndex, prtAlertSeverityLevel,
|
|
prtAlertGroup, prtAlertGroupIndex, prtAlertLocation, and
|
|
prtAlertCode for the latest critical evnet in the
|
|
prtAlertTable. The binary string is defined as following:
|
|
<table>
|
|
-----------------------------------------------------
|
|
Field | Filed | Description
|
|
Offset | Length |
|
|
-----------------------------------------------------
|
|
0 | 4 | the value of prtAlertIndex
|
|
4 | 4 | the value of prtAlertSeverityLevel
|
|
8 | 4 | the value of prtAlertGroup
|
|
12 | 4 | the value of prtAlertGroupIndex
|
|
16 | 4 | the value of prtAlertLocation
|
|
20 | 4 | the value of prtAlertCode
|
|
------------------------------------------------------
|
|
</table>
|
|
|
|
Each field is in Big Endian style.
|
|
Additional information:
|
|
This object is used to pass alert information from the
|
|
peripheral to the IIO card. The standard printer MIB
|
|
contains the following description:
|
|
|
|
printerAlert TRAP-TYPE
|
|
ENTERPRISE printerV1Alert
|
|
VARIABLES { prtAlertIndex, prtAlertSeverityLevel, prtAlertGroup,
|
|
prtAlertGroupIndex, prtAlertLocation, prtAlertCode }
|
|
DESCRIPTION
|
|
'This trap is sent whenever a critical event is added to the
|
|
prtAlertTable.'
|
|
|
|
In order to provide this information in the trap packet, the
|
|
IIO card enables traps on channelPrinterAlert. When a critical
|
|
alert is generated the peripheral fills the appropriate value
|
|
into this object and sends it to the card.
|
|
This object is a structure which contains 24 bytes of data.
|
|
The structure is:
|
|
|
|
struct structAlertInfo {
|
|
sint32 prtAlertIndex;
|
|
sint32 prtAlertSeverityLevel;
|
|
sint32 prtAlertGroup;
|
|
sint32 prtAlertGroupIndex;
|
|
sint32 prtAlertLocation;
|
|
sint32 prtAlertCode;
|
|
} thisAlertData;"
|
|
::= { channel 2 }
|
|
|
|
|
|
|
|
|
|
install-date OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(13))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Identifies the date that the device was installed. The format
|
|
of the string is 'YYYYMMDDHHmmZ'. Where:
|
|
YYYY is the year.
|
|
MM is the month (1-12).
|
|
DD is the day (1-31).
|
|
HH is the hour of the day (0-23).
|
|
mm are the minutes (0-59).
|
|
'Z' designates Greenwich Mean Time; if 'Z' not specified,
|
|
value is local time.
|
|
Device POS must specify the conditions for setting this
|
|
object.
|
|
Additional information:
|
|
Setting the SERVICE-PASSWORD object will
|
|
enable setting this object."
|
|
::= { status-system 8 }
|
|
|
|
|
|
timestamp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(15))
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Sets the printer's current time in (UTC). The format of the
|
|
string is 'YYYYMMDDHHMMSS'. Where
|
|
YYYY is the year.
|
|
MM is the month (1-12)
|
|
DD is the day of the month (1-31)
|
|
HH is the hour of the day (0-23)
|
|
MM is the minutes (0-59)
|
|
SS is the seconds (0-59)
|
|
Device POS must specify the conditions for setting this
|
|
object."
|
|
::= { status-system 13 }
|
|
|
|
|
|
service-id OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(5))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A read of this object will return the current SERVICE ID value
|
|
in the printer. The format is 'YYDDD' where:
|
|
YY = calendar year - 1990
|
|
DDD = (calendar month - 1) * 30 + (calendar day of the
|
|
month or 30, if > 30)
|
|
A write of this object will only succeed if the
|
|
MANUFACTURING-CONTROL PML object has been set with the correct
|
|
<<hidden>>. If the write operation is not allowed, this object
|
|
will return an <genErr> status.
|
|
Additional information:
|
|
Setting the SERVICE-PASSWORD object will
|
|
enable setting this object."
|
|
::= { status-system 19 }
|
|
|
|
|
|
show-address OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOff(1),
|
|
eAuto(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"If this object is set to eAuto, and the device has an IP
|
|
address, the IP address of the device will be shown with the
|
|
READY message. If this object is set to eOff, the IP address
|
|
will not be shown."
|
|
::= { display-status 3 }
|
|
|
|
|
|
serial-number OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Identifies the serial number for the device. If the
|
|
SERIAL-NUMBER object is set by the user, then setting the
|
|
object does not need to be protected. If the SERIAL-NUMBER
|
|
object is set at the factory, then the SERVICE-PASSWORD object
|
|
must be set correctly before the SERIAL-NUMBER object is
|
|
writable. If this is a writable object, the POS should indicate
|
|
the maximum supported string length. If possible, encode the
|
|
serial number in a symbol set (like Roman-8) that matches the
|
|
ASCII character set and limit the characters used to ASCII
|
|
characters.
|
|
Additional information:
|
|
This value IS AFFECTED BY NVRAM resets, it is set to the
|
|
default value of XXXXXXXXXX, when a NVRAM init is done."
|
|
::= { id 3 }
|
|
|
|
|
|
fw-rom-datecode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Identifies the base system firmware date code. The date code
|
|
will be encoded in the yyyymmdd format. There may be several
|
|
versions of the base system firmware. The date code associated
|
|
with the version of the base system firmware that is being used
|
|
is reported. There may be other date code objects for other
|
|
specific modules such as fonts, localization modules, etc.;
|
|
these other datecode objects are device specific."
|
|
::= { id 5 }
|
|
|
|
|
|
fw-rom-revision OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This identifies the system code firmware ROM revision code. The
|
|
format for a revision is major_revision.minor_revision. There
|
|
may be other ROM revision code objects for other specific ROMs
|
|
such as font ROMs, localization ROMs, etc; these other ROM
|
|
revision code objects are device specific."
|
|
::= { id 6 }
|
|
|
|
|
|
device-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"User defined device name. The POS should indicate the maximum
|
|
supported string length. If the user entered string is too
|
|
long, the device will store as much as possible and will return
|
|
the <OKNearestLegal ValueSubstituted>.Additional information:
|
|
The maximum supported string length is 32
|
|
characters. If the user entered string is too long,
|
|
the device will store the first 32 characters and will
|
|
return the <noError> status."
|
|
::= { id 10 }
|
|
|
|
|
|
device-location OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"User defined device location. The POS should indicate the
|
|
maximum supported string length. If the user entered string is
|
|
too long, the device will store as much as possible and will
|
|
return the <OKNearestLegal ValueSubstituted>.Additional information:
|
|
The maximum supported string length is 16
|
|
characters. If the user entered string is too long,
|
|
the device will store the first 16 characters and will
|
|
return the <noError> status."
|
|
::= { id 11 }
|
|
|
|
|
|
asset-number OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"User defined asset number. The POS should indicate the maximum
|
|
supported string length. If the user entered string is too
|
|
long, the device will store as much as possible and will return
|
|
the <OKNearestLegal ValueSubstituted>.Additional information:
|
|
The maximum supported string length is 8
|
|
characters. If the user entered string is too long,
|
|
the device will store the first 8 characters and will
|
|
return the <noError> status."
|
|
::= { id 12 }
|
|
|
|
|
|
default-copies OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes default copies. Default copies is the
|
|
default values used by the PDL to control the number of copies
|
|
of each page in the print job that are printed. The print job
|
|
can override this value. The list of supported values should be
|
|
documented in the device POS.
|
|
Additional information:
|
|
The supported values are 1 through 32000.
|
|
Setting to an unsupported value causes the printer to substitute in a snap
|
|
value and to return <noError> status.
|
|
The snaps are as follows:
|
|
<1 snaps to 1
|
|
>999 snaps to 32000"
|
|
::= { settings-pdl 4 }
|
|
|
|
|
|
default-lines-per-page OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the default number of lines per page. The
|
|
POS indicates the supported values. An unsupported value causes
|
|
the printer to use the closest supported value, causing the
|
|
printer to return the <noError>.
|
|
Additional information:
|
|
The supported values in LaserJet 8150 are 5 to 128.
|
|
Setting to an unsupported value causes the
|
|
the printer to substitute in a snap value and to return
|
|
<noError>
|
|
status.
|
|
The snap values are as follow:
|
|
<5 snaps to 5
|
|
>128 snaps to 128"
|
|
::= { settings-pdl 11 }
|
|
|
|
|
|
default-vmi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the default vertical motion index. The unit
|
|
of measure for VMI is centipoints per line. The POS indicates
|
|
the supported values. An unsupported value causes the printer
|
|
to use the closest supported value, causing the printer to
|
|
return <noError>."
|
|
::= { settings-pdl 12 }
|
|
|
|
|
|
default-media-size OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUSExecutive(1),
|
|
eUSLetter(2),
|
|
eUSLegal(3),
|
|
eFoolscap(10),
|
|
eLedger(11),
|
|
eROC16K(17),
|
|
eJISExecutive(18),
|
|
eROC8K(19),
|
|
eISOandJISA5(25),
|
|
eISOandJISA4(26),
|
|
eISOandJISA3(27),
|
|
eJISB5(45),
|
|
eJISB4(46),
|
|
eJapanesePostcardDouble(72),
|
|
eMonarch(80),
|
|
eCommercial10(81),
|
|
eInternationalDL(90),
|
|
eInternationalC5(91),
|
|
eInternationalB5(100),
|
|
eCustom(101),
|
|
eUSLetterR(258),
|
|
eISOandJISA4R(282),
|
|
eUnknownMediaSize(32767)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This indicates the default media size. A write of an
|
|
unsupported value causes an <ErrorInvalidOrUnsupported Value>. Complete list of supported media sizes along with their
|
|
dimensions are listed in the ''Media Size Table'' near the end
|
|
of this document. (for a full list of media size enums see the
|
|
end of this file) "
|
|
::= { settings-pdl 13 }
|
|
|
|
|
|
cold-reset-media-size OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUSLetter(2),
|
|
eISOandJISA4(26)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the media size that is used as the
|
|
DEFAULT-MEDIA-SIZE when a cold reset occurs."
|
|
::= { settings-pdl 19 }
|
|
|
|
|
|
reprint OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOff(1),
|
|
eOn(2),
|
|
eAuto(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the reprint (jam recovery) setting. If eOn,
|
|
then the device will reprint pages jammed pages. If eOff, the
|
|
device will not attempt to reprint jammed pages. If eAuto, a
|
|
device dependent algorithm (which should be documented in the
|
|
POS) will be used to determine if the page gets reprinted. This
|
|
object controls all PDLs, unless a specific PDL supports its
|
|
own reprint control mechanism. To date, only PostScript has a
|
|
PDL reprint control mechanism."
|
|
::= { settings-pdl 36 }
|
|
|
|
|
|
pcl-total-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of PCL pages printed by the device.
|
|
Additional information:
|
|
In LaserJet 8150 the PCL page count is kept in
|
|
NVRAM, and the NVRAM value is updated at least every
|
|
10 pages. NOTE: The value returned by this object will
|
|
be incremented every page but if power is lost between
|
|
NVRAM updates, up to 9 pages of the page count may be
|
|
lost. The page count counter will be reset to zero
|
|
after 16,777,215 (2^24-1) pages.
|
|
The page count is incremented when a sheet of media is pulled from an input
|
|
tray. A duplex printed sheet will cause this counter to be incremented by
|
|
two."
|
|
::= { pdl-pcl 5 }
|
|
|
|
|
|
pcl-default-font-height OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the default PCL height. Height is an
|
|
approximate measure of the body of the type in centipoints. A
|
|
centipoint is 1/7200 inch. Height applies only to proportional
|
|
fonts. Point size, in points, can be converted to font height,
|
|
in centipoints, by multiplying the point size by 100. The POS
|
|
indicates the supported values. An unsupported value causes the
|
|
printer to use the closest supported value, causing the printer
|
|
to return <noError>. ''Closest'' means
|
|
the smallest absolute difference.
|
|
Additional information:
|
|
Supported values range from 400 to 99975, in
|
|
increments of 25 units.
|
|
Setting to an unsupported value causes the
|
|
printer to substitute in a snap value and to
|
|
return <noError> status.
|
|
The snap values are as follow:
|
|
<=400 snaps to 400
|
|
>=99975 snaps to 99975
|
|
Unsupported values in the range 400 to 99975 snap
|
|
DOWN to the previous supported value
|
|
(i.e 25293 snaps to 25275 or 75038 snaps to 75025)."
|
|
::= { pdl-pcl 13 }
|
|
|
|
|
|
pcl-default-font-source OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eInternal(1),
|
|
ePermanentSoft(2),
|
|
eRomSimm2(11),
|
|
eRomSimm3(12),
|
|
eRomSimm4(13),
|
|
eRomSimm5(14)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the value of the default font source
|
|
variable in NVRAM."
|
|
::= { pdl-pcl 14 }
|
|
|
|
|
|
pcl-default-font-number OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the value of the default font number
|
|
variable in NVRAM. Writing an unsupported value causes the
|
|
printer to generate an <badValue>.
|
|
Additional information:
|
|
Valid numbers or 0 - 255, but only font numbers that are
|
|
included in the PCL FONT LIST are selectable."
|
|
::= { pdl-pcl 15 }
|
|
|
|
|
|
pcl-default-font-width OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the default PCL font width. Width is
|
|
expressed as the width of a character in centipoints. A
|
|
centipoint is 1/7200 inch. Width applies only to fixed space
|
|
fonts. Pitch, in character per inch, can be converted to font
|
|
width, in centipoints, by dividing 7200 by the pitch. The POS
|
|
indicates the supported values. An unsupported value causes the
|
|
printer to use the closest supported value, causing the printer
|
|
to return <noError>. ''Closest'' means
|
|
the smallest absolute difference.
|
|
Additional information:
|
|
Setting to an unsupported value causes the
|
|
printer to substitue in a snap value (listed below)
|
|
and return <noError> status.
|
|
The snap values for pitch are as follow:
|
|
<=44 snaps to 44
|
|
>=9999 snaps to 9999"
|
|
::= { pdl-pcl 16 }
|
|
|
|
|
|
postscript-total-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of PostScript pages printed by the device.
|
|
Additional information:
|
|
This object is only supported if the PostScript
|
|
option is installed.
|
|
In LaserJet 8150 the count is kept in NVRAM, and the
|
|
NVRAM value is updated at least every 10
|
|
sheets. NOTE: The value returned by this object will
|
|
be incremented every sheet but if power is lost between
|
|
NVRAM updates up to 9 sheets of the count may be
|
|
lost. The counter will be reset to zero
|
|
after 16,777,215 (2^24-1) pages. "
|
|
::= { pdl-postscript 5 }
|
|
|
|
|
|
postscript-print-errors OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOff(1),
|
|
eOn(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the value of the print PostScript errors
|
|
setting. If eOn, PostScript prints an error page showing the
|
|
error encountered and the stack at the time of the error.
|
|
Additional information:
|
|
This object is only supported if the PostScript
|
|
option is installed."
|
|
::= { pdl-postscript 11 }
|
|
|
|
|
|
collated-originals-support OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates that the printer can create multiple, collated
|
|
'originals' of a job and shows the level of support for this
|
|
capability.
|
|
cCollatedOriginals - The printer can create multiple
|
|
collated originals, or 'mopies'. This is the base
|
|
functionality required by the other collection items.
|
|
|
|
cProofAndHold - The printer saves a copy of the job while
|
|
printing the first mopy. Later, this held job can be
|
|
released and the rest of the mopies will print.
|
|
cSecurityPrint - The printer spools the job and holds the
|
|
job until the user releases the job by entering a
|
|
<<hidden>> at the printer's control panel.
|
|
cAutoHighlight - The printer prints the job a number of
|
|
times with a mail distribution list prepended to each
|
|
job. A different mailing address is highlighted on each
|
|
mopy.
|
|
cCollatedAtSpeed - The printer can create multiple collated
|
|
copies where all copies after the original are printed
|
|
at engine speed.
|
|
Additional information:
|
|
Indicates that the printer can create multiple, collated
|
|
originals of a job and shows the level of support for this
|
|
capability.
|
|
cCollatedOriginals - The printer can create multiple collated
|
|
originals, or mopies.
|
|
|
|
This is the base functionality required by the other
|
|
collection items.
|
|
Without disk, this object will not exist. This will be set at
|
|
boot-up initialization. If the disk fails, in any way, then
|
|
the disk error functionality will handle the situation.
|
|
|
|
A color printer (LaserJet 4550) that only has a RAMDISK installed is
|
|
treated like there is no disk and therefore this object will
|
|
not exist.
|
|
|
|
The value of this object will be:
|
|
!cCollatedOriginals - Only FLASH installed
|
|
cCollatedOriginals - IDE is installed combined
|
|
with/without FLASH
|
|
cCollatedOriginals - RAMDISK is On combined with/without FLASH"
|
|
::= { status-system 42 }
|
|
|
|
|
|
host-application-available-memory OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the amount of memory, in bytes, that the device has
|
|
available for job-related processing or resources. Also known
|
|
as driver work space (DWS) memory."
|
|
::= { status-system 59 }
|
|
|
|
|
|
socket-ping-job-events-version OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object reports the current version of the Socket Ping Job
|
|
Events capability. The version number is returned as a string
|
|
in the format MAJOR.MINOR.SUB version. (eg. 1.0.1) If socket
|
|
ping is not supported by this printer then the object is either
|
|
not implemented or it returns a '0'."
|
|
::= { socket-ping 1 }
|
|
|
|
|
|
job-info-change-id OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(16))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the current value of an object in the job-info sub-tree
|
|
whose value has changed. Define the object identifier for the
|
|
object whose value has changed as
|
|
job-info.required-field.optional-field.job-id. job-info
|
|
represents the OID prefix of all objects in the job-info
|
|
sub-tree. Required-field represents the OID field value that
|
|
follows the job-info prefix. Since some objects in the job-info
|
|
sub-tree have two OID fields between the job-info prefix and
|
|
the job-id, the optional-field represents the OID field between
|
|
the required-field and the job-id field, if present. Using this
|
|
definition, the format for the JOB-INFO-CHANGE-ID binary value
|
|
can be described as follows:
|
|
Bytes 0-3 : required-field
|
|
Bytes 4-7 : optional-field, or all zeros if there
|
|
is no optional field
|
|
Bytes 8-11: Job ID.
|
|
Bytes 12-n : The value of the object job-info.
|
|
required-field.optional-field.job-id.
|
|
All multi-byte values stored in Motorola (big-endian) format,
|
|
where the most significant byte occurs first.
|
|
Additional information:
|
|
LaserJet 8100 will use this object to report
|
|
changes to the job-info-pages-printed and job-info-state
|
|
objects. The required-field (bytes 0 through 3) will
|
|
designate whether the change to be reported involves the
|
|
pages printed (13) or job state (15). The optional-field
|
|
(bytes 4 through 7) will always be zeroes. The value-field
|
|
(bytes 12 through 15) will contain the new value for pages
|
|
printed or job state cast to a 32-bit integer.
|
|
|
|
Note: It is possible that traps generated by this object
|
|
have the same value. This is caused by the architecture of
|
|
LaserJet 8100. In the LaserJet 8100 System, it is highly probable that
|
|
the object value will change so rapidly that when the trap is
|
|
processed, PML will read the same value twice. This is timing
|
|
related and will generally be seen at the end of a job."
|
|
::= { settings-job 3 }
|
|
|
|
|
|
hold-job-timeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The time, in minutes, that the printer will wait before
|
|
automatically deleting a held job. This allows the printer to
|
|
automatically clean up jobs that have been forgotten (held but
|
|
never released).
|
|
Additional information:
|
|
This only applies to temporary held jobs, i.e., HOLD=ON or
|
|
PROOF. This is a global timer that only affects the jobs
|
|
that are sent after it is set.
|
|
A value of 0 means never delete the jobs.
|
|
Setting it to an unsupported value causes
|
|
the printer to substitute a value (listed
|
|
below) and to return <noError>
|
|
status.
|
|
LaserJet 4600 supports values of 0, 60, 240, 1440, and 10080
|
|
The values are as follows:
|
|
<=0 snap to 0 (disabled)
|
|
>=1 and <=150 snap to 60 (60 minutes)
|
|
>=151 and <=840 snap to 240 (4 hours)
|
|
>=841 and <=2880 snap to 1440 (1 day)
|
|
>=2881 snap to 10080 (1 week)"
|
|
::= { settings-job 10 }
|
|
|
|
|
|
current-job-parsing-id OBJECT-TYPE
|
|
SYNTAX INTEGER(-1..2147483647)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the printer assigned job identification for the job
|
|
currently being processed by the processing PDL sub-system. The
|
|
job ID is a monotonically increasing number. The job ID may be
|
|
reset to zero at power-up and may roll over to zero after
|
|
reaching some maximum value.
|
|
Additional information:
|
|
A value of -1 is returned when the printer
|
|
is not parsing a job.
|
|
|
|
When data for a new job is detected, this object is
|
|
updated (the job may or may not turn out to be a Null
|
|
Job); however, the trap does not occur until the printer
|
|
determines that it is not a Null Job. (A job is considered
|
|
to be a 'null job' if it has no name or job attribute,
|
|
causes no pages to be printed, and consumes MIN_JOB_SIZE
|
|
(9) or fewer bytes.) A trapped value will differ from
|
|
the previous value by one or more.
|
|
|
|
Some job-info- objects are created when the first data
|
|
bytes are received. If the printer determines that the
|
|
job is a Null Job, the job-info- objects related to the
|
|
Null Job are deleted. LaserJet 8100 retains the job-info-
|
|
objects for the MAX_JOBS_IN_LIST (32) most recent jobs
|
|
that are not Null Jobs.
|
|
|
|
The first job received after power-up will have job ID 1,
|
|
and the job ID will increment to 2,147,483,647 before
|
|
rolling to zero. To distinguish whether a power cycle or a
|
|
rollover causes a reduction in the job ID value, the
|
|
object prtGeneralConfigChanges can be watched and if it
|
|
increments at the same time as the drop is observed in
|
|
the value of CURRENT-JOB-PARSING-ID, then a power cycle
|
|
is the most likely cause."
|
|
::= { job-being-parsed 1 }
|
|
|
|
|
|
job-info-name1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the first part of this print job's name. The last OID
|
|
field for this dynamic object contains the job ID.
|
|
Additional information:
|
|
The job name is the string specified by the
|
|
NAME= parameter of the @PJL JOB command which allows a
|
|
maximum of 80 characters. The first 40 characters are
|
|
in this object and the second 40 are in job-info-name2.
|
|
The symbol set is Roman-8.
|
|
|
|
When jobs are nested, the value assigned to this object
|
|
is the name provided by the most recent @PJL JOB NAME=
|
|
command. If no name is provided, a null string is
|
|
returned."
|
|
::= { job-info 1 }
|
|
|
|
|
|
job-info-name2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the second part of this print job's name. The last OID
|
|
field for this dynamic object contains the job ID.
|
|
Additional information:
|
|
See job-info-name1."
|
|
::= { job-info 2 }
|
|
|
|
|
|
job-info-stage OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates what printer sub-systems are currently processing
|
|
this print job. The last OID field for this dynamic object
|
|
contains the job ID. cSourceSubsystem - some of the job is in
|
|
the printer I/O subsystem. cProcessingSubsystem - some of the
|
|
job is in the printer imaging processing subsystem.
|
|
cDestinationSubsystem - some of the job is being printed.
|
|
Additional information:
|
|
For LaserJet 8100, cSourceSubsystem and
|
|
cProcessingSubsystem will always be set and cleared
|
|
together. They are set when the beginning of the
|
|
job is detected, and they are cleared when the end
|
|
of the job is parsed.
|
|
|
|
A non-printing job will never set
|
|
cDestinationSubsystem.
|
|
|
|
When a page is ready to be printed (the intermediate has
|
|
been built and the page is `closed' by the personality),
|
|
cDestinationSubsystem will be set even if a page of a
|
|
previous job is currently being printed.
|
|
cDestinationSubsystem remains set until the last page of
|
|
the job has finished printing.
|
|
|
|
If a page requires extensive processing and allows all
|
|
the previous pages of a job to complete printing,
|
|
cDestinationSubsystem will remain set until the last
|
|
page of the job has finished printing."
|
|
::= { job-info 10 }
|
|
|
|
|
|
job-info-io-source OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates which I/O source, the print job was received over.
|
|
The value maps to port numbering scheme supported in the
|
|
DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree."
|
|
::= { job-info 11 }
|
|
|
|
|
|
job-info-pages-processed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the number of pages processed by the processing
|
|
subsystem. If neither the cSourceSubsystem or the
|
|
cProcessingSubsystem items are in the associated JOB-INFO-STAGE
|
|
object, then this object contains the total number of pages
|
|
processed for this job. The last OID field for this dynamic
|
|
object contains the job ID.
|
|
Additional information:
|
|
This object is incremented by one when a
|
|
page is processed (`closed' by the personality), regardless
|
|
of the number of pages that are printed as a result of the
|
|
single page processed. In other words, it does not matter
|
|
how many identical copies of a page are printed or no pages
|
|
may be printed if operating in silent run mode, this count
|
|
is incremented exactly once.
|
|
|
|
A page is considered processed when all of the input
|
|
data has been processed for a page (that is, when the
|
|
intermediate has been produced, and the personality has
|
|
`closed' the page. At this time, the image of the page is
|
|
not necessarily completely formed.)"
|
|
::= { job-info 12 }
|
|
|
|
|
|
job-info-pages-printed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the number of pages printed by the destination
|
|
subsystem. If none of the cSourceSubsystem,
|
|
cProcessingSubsystem or cDestinationSubsystem items are in the
|
|
associated JOB-INFO-STAGE object, then this object contains the
|
|
total number of pages printed for this job. This value may
|
|
increase by two each time for duplex jobs. The last OID field
|
|
for this dynamic object contains the job ID.
|
|
Additional information:
|
|
If multiple copies of a page are printed,
|
|
each copy is counted individually."
|
|
::= { job-info 13 }
|
|
|
|
|
|
job-info-size OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the number of bytes of data processed by the
|
|
processing subsystem. If neither of the cSourceSubsystem or
|
|
cProcessingSubsystem items are in the associated JOB-INFO-STAGE
|
|
object, then this object contains the size of this job, in
|
|
bytes. The last OID field for this dynamic object contains the
|
|
job ID.
|
|
Additional information:
|
|
This count may be incremented by values
|
|
other than one as blocks of data are processed; blocks
|
|
of data (which may be as large as 2K bytes) will be
|
|
processed in a varying amount of time.
|
|
|
|
During the processing of a job and even when a job completes,
|
|
an exact count of the number of I/O bytes processed by the
|
|
job is not necessarily to be expected."
|
|
::= { job-info 14 }
|
|
|
|
|
|
job-info-state OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eAborted(3),
|
|
eWaitingForResources(4),
|
|
ePrinted(5),
|
|
eTerminating(7),
|
|
eCancelled(10),
|
|
eProcessing(11),
|
|
eScanning(12),
|
|
eSending(13)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the state of the job. The last OID field for this
|
|
dynamic object contains the job ID.
|
|
eAborted - the print job was aborted.
|
|
eWaitingForResources - the print job requires resources
|
|
that are not currently available. Example resources
|
|
that can cause the job to wait include the print engine
|
|
or PDL processor being unavailable. The print engine
|
|
could be unavailable due to paper out, paper jam,
|
|
staple out, stapler jam, marking agent low, output bin
|
|
full, etc. The PDL processor could be unavailable due
|
|
to an off-line condition. Each printer specific object
|
|
specification should state which conditions cause a job
|
|
to be waiting for resources and also state which
|
|
objects can be retrieved by an application to determine
|
|
the exact cause of a resource being unavailable.
|
|
ePrinted - the job has printed. The related JOB-INFO-
|
|
OUTCOME object indicates if any problems were
|
|
encountered while the job was processed.
|
|
eRetained - the job can be reprinted.
|
|
eTerminating - the job was aborted or cancelled and is
|
|
currently is terminating.
|
|
eInterrupted - the job has been interrupted. The job can be
|
|
continued.
|
|
ePaused - the job has been paused. The job can be
|
|
continuted.
|
|
eCancelled - the job has been cancelled.
|
|
eProcessing - the job is currently being printed normally.
|
|
"
|
|
::= { job-info 15 }
|
|
|
|
|
|
job-info-outcome OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOk(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates if any warning or error conditions were encountered
|
|
while processing the assoicated job. The last OID field for
|
|
this dynamic object contains the job ID.
|
|
Additional information:
|
|
In LaserJet 8100, warnings and errors are not recorded
|
|
in this object. Although no meaningful information can be
|
|
obtained from this object, it is kept around for the
|
|
compatibility needs of existing software."
|
|
::= { job-info 19 }
|
|
|
|
|
|
job-info-outbins-used OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates which output bins this job has delivered printed
|
|
pages to. The last OID field for this dynamic object contains
|
|
the job ID.
|
|
Additional information:
|
|
The bins designated by this collection include
|
|
the printer's own output bins as well as the `logical output
|
|
bins' associated with any attached external paper handling
|
|
devices. (The mapping of the physical output bins of an
|
|
external paper handling device to its `logical output bins'
|
|
depends on the usage mode of the device. For instance, in
|
|
`mailbox mode', there is one-to-one correspondence of
|
|
`logical output bins' to physical bins, whereas in `stacker
|
|
mode', one `logical output bin' may map to several physical
|
|
bins.)
|
|
|
|
Although LaserJet 4100 and LaserJet 4550 both come with two output
|
|
bins -- a face-down bin on the top of the device and a
|
|
face-up bin at the back of the device -- firmware will not
|
|
provide a means of selecting between the two, nor will it
|
|
report which of the two gets used. For this reason, bit 0
|
|
(cOutbin1) of this collection is being used to designate
|
|
both of these bins together."
|
|
::= { job-info 20 }
|
|
|
|
|
|
job-info-physical-outbins-used OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates which physical output bins this job has delivered
|
|
printed pages to. The last OID field for this dynamic object
|
|
contains the job ID.
|
|
Additional information:
|
|
The output bins designated by the bits of
|
|
this collection include the standard output bin(s) plus the
|
|
physical bins of attached external paper handling devices.
|
|
The configuration (if any) of external paper handling devices
|
|
will determine the mapping of individual bits in this
|
|
collection to the physical bins of the devices.
|
|
For LaserJet 4100 and LaserJet 4550, the cOutbin1 is used for Face Down
|
|
bin, cOutbin2 is used for Face Up bin, and 3-15 are used for
|
|
the 13 optional output bins (12 plus an extension to the Face
|
|
Up bin) for backwards compatibility with LaserJet 8000/LaserJet 8100 and
|
|
forwards compatibility with LaserJet 8150. However, since they
|
|
cannot distinguish output going to the Face Up or Face Down
|
|
bin in the firmware because the diverter can only be moved
|
|
manually, bit 0 (cOutbin1) is being used to designate
|
|
both of these bits together. If an external paper handling
|
|
output device is connected, then bit 2 (cOutbin3) will
|
|
represent the device's first output bin (and so on)."
|
|
::= { job-info 22 }
|
|
|
|
|
|
job-info-attr-1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. Attribute objects are saved sequentially, starting
|
|
with 1, after the start of a job. If more attributes are set
|
|
than there are objects to store them, the excess JOBATTR values
|
|
are ignored. If the corresponding SET JOBATTR= command has not
|
|
been received when a get is done for this object, a status of
|
|
<noSuchName> will be returned."
|
|
::= { job-info-attribute 1 }
|
|
|
|
|
|
job-info-attr-2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 2 }
|
|
|
|
|
|
job-info-attr-3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 3 }
|
|
|
|
|
|
job-info-attr-4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 4 }
|
|
|
|
|
|
job-info-attr-5 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 5 }
|
|
|
|
|
|
job-info-attr-6 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 6 }
|
|
|
|
|
|
job-info-attr-7 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 7 }
|
|
|
|
|
|
job-info-attr-8 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 8 }
|
|
|
|
|
|
job-info-attr-9 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 9 }
|
|
|
|
|
|
job-info-attr-10 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 10 }
|
|
|
|
|
|
job-info-attr-11 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 11 }
|
|
|
|
|
|
job-info-attr-12 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 12 }
|
|
|
|
|
|
job-info-attr-13 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 13 }
|
|
|
|
|
|
job-info-attr-14 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 14 }
|
|
|
|
|
|
job-info-attr-15 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 15 }
|
|
|
|
|
|
job-info-attr-16 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..80))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the value that was set in PJL via the SET JOBATTR=
|
|
command. See JOB-INFO-ATTR-1 for details."
|
|
::= { job-info-attribute 16 }
|
|
|
|
|
|
job-info-requested-originals OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of requested collated copies. The value was supplied
|
|
with the job via PJL QTY variable, the PostScript Collate and
|
|
NumCopies entries in the page device dictionary, or via some
|
|
other mechansim."
|
|
::= { job-info 24 }
|
|
|
|
|
|
job-info-page-count-current-original OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The page number being printed within the current copy of a
|
|
collated multi-copy job. This value changes when the
|
|
job-info-pages-printed changes. The job-info-pages-printed
|
|
indicates the total number of pages printed in the job, while
|
|
this object indicates the number of pages printed for this copy
|
|
of a collated multi-copy job.
|
|
Additional information:
|
|
The number of pages in the current copy of a collated
|
|
multi-copy job which have been completely printed and
|
|
safely delivered to the output bin."
|
|
::= { job-info 25 }
|
|
|
|
|
|
job-info-pages-in-original OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of pages in a single copy of a collated multi-copy job."
|
|
::= { job-info 26 }
|
|
|
|
|
|
job-info-printed-originals OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of collated copies completely printed and delivered to
|
|
the output bin at time of query."
|
|
::= { job-info 27 }
|
|
|
|
|
|
job-info-accounting-media-size OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUSExecutive(1),
|
|
eUSLetter(2),
|
|
eUSLegal(3),
|
|
eLedger(11),
|
|
eROC16K(17),
|
|
eJISExecutive(18),
|
|
eROC8K(19),
|
|
eISOandJISA5(25),
|
|
eISOandJISA4(26),
|
|
eISOandJISA3(27),
|
|
eJISB5(45),
|
|
eJISB4(46),
|
|
eISOB5(65),
|
|
eJapansePostcardDouble(72),
|
|
eMonarch(80),
|
|
eCommercial10(81),
|
|
eInternationalDL(90),
|
|
eInternationalC5(91),
|
|
eInternationalB5(100),
|
|
eCustom(101),
|
|
eUSLetterR(258),
|
|
eISOandJISA4R(282),
|
|
eUnknownMediaSize(32767)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the media size of the printed job. The media size of
|
|
the first page will decide the media size of the entire job.
|
|
The return value of this object will only be valid when the
|
|
printer finishes printing the entire job."
|
|
::= { job-info-accounting 1 }
|
|
|
|
|
|
job-info-accounting-media-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUnknownMedia(1),
|
|
eStandardType(2),
|
|
ePreprinted(3),
|
|
eBond(4),
|
|
eLetterhead(5),
|
|
eTransparency(7),
|
|
eLabels(8),
|
|
eRecycled(9),
|
|
eColored(10),
|
|
eCardStock(11),
|
|
eRough(12),
|
|
ePrepunched(13),
|
|
eHeavy(14),
|
|
eUserType1(16),
|
|
eUserType2(17),
|
|
eUserType3(18),
|
|
eUserType4(19),
|
|
eUserType5(20)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the media type of the printed job. The media type of
|
|
the first page will decide the media type of the entire job.
|
|
The return value of this object will only be valid when the
|
|
printer finishes printing the entire job."
|
|
::= { job-info-accounting 2 }
|
|
|
|
|
|
job-info-accounting-finishing-options OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eNoFinish(1),
|
|
eOffset(2),
|
|
ePunch(3),
|
|
eStapler(4),
|
|
eFinisher(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the finishing option used on the printed job. The
|
|
finishing option specified for the first page will decide the
|
|
finishing option of the entire job. The return value of this
|
|
object will only be valid when the printer finishes printing
|
|
the entire job."
|
|
::= { job-info-accounting 3 }
|
|
|
|
|
|
job-info-accounting-media-simplex-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the total number of simplex pages printed in a
|
|
particular job."
|
|
::= { job-info-accounting 4 }
|
|
|
|
|
|
job-info-accounting-media-duplex-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the total number of duplex pages printed in a
|
|
particular job."
|
|
::= { job-info-accounting 5 }
|
|
|
|
|
|
job-info-accounting-grayscale-impression-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the total number of monochrome pages printed in a
|
|
particular job."
|
|
::= { job-info-accounting 6 }
|
|
|
|
|
|
job-info-accounting-color-impression-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the total number of color pages printed in a
|
|
particular job."
|
|
::= { job-info-accounting 7 }
|
|
|
|
|
|
job-info-accounting-black-dots OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the total number of black pixels used in a particular
|
|
job.
|
|
Additional information:
|
|
This object reports kilodots. (A kilodot
|
|
is 1000 dots.)"
|
|
::= { job-info-accounting 8 }
|
|
|
|
|
|
job-info-accounting-yellow-dots OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the total number of yellow pixels used in a particular
|
|
job.
|
|
Additional information:
|
|
This object reports kilodots. (A kilodot
|
|
is 1000 dots.)"
|
|
::= { job-info-accounting 9 }
|
|
|
|
|
|
job-info-accounting-cyan-dots OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the total number of cyan pixels used in a particular
|
|
job.
|
|
Additional information:
|
|
This object reports kilodots. (A kilodot
|
|
is 1000 dots.)"
|
|
::= { job-info-accounting 10 }
|
|
|
|
|
|
job-info-accounting-magenta-dots OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Contains the total number of magenta pixels used in a
|
|
particular job.
|
|
Additional information:
|
|
This object reports kilodots. (A kilodot
|
|
is 1000 dots.)"
|
|
::= { job-info-accounting 11 }
|
|
|
|
|
|
job-info-accounting-job-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePrintJob(1),
|
|
eIPPJob(2),
|
|
eCopyJob(3),
|
|
eCopyInterruptJob(4),
|
|
eJetSendJob(5),
|
|
eInternalPage(6),
|
|
eCleaningPage(7),
|
|
eAutoCleaningPage(8),
|
|
eDigitalSendJob(9),
|
|
eWebPrintJob(10),
|
|
eFaxPrintJob(11),
|
|
eRetrievedJob(12),
|
|
ePhotoCardPrintJob(13),
|
|
eUnknownJob(1000)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Keeps track of what type of job is processed. "
|
|
::= { job-info-accounting 14 }
|
|
|
|
|
|
held-job-user-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"User name that is obtained by the driver through some internal
|
|
method or from user input.
|
|
Additional information:
|
|
The following is a general description for all the JOB-MANAGEMENT
|
|
objects described below. These object describe the attributes of the
|
|
dynamic list containing all the stored jobs on the disk available for
|
|
printing or deleting via the job-management feature. The jobs on this
|
|
list are not deleted from the disk unless explicitly specified by the
|
|
user. A print job may be specified for retention by PJL commands in the
|
|
data stream.
|
|
|
|
Following is a list of the PJL commands (i.e. these comments describe
|
|
the PJL implementation and in some cases do not reflect the PML
|
|
implementation.):
|
|
|
|
@PJL SET HOLD=OFF|ON|PROOF|STORE|PRINT
|
|
|
|
GENERAL DESCRIPTION:
|
|
|
|
This variable specifies the retention classification of the job. The
|
|
values indicate whether the job is printed immediately and/or stored.
|
|
|
|
OFF: The job is printed but not retained on disk after printing. This
|
|
is the default value.
|
|
|
|
ON: This setting may be thought of as free proof-and-hold. The
|
|
requested number of copies will be printed and the job will be
|
|
temporarily stored on disk. The job will then be available for printing
|
|
additional copies through the control panel and through PML. There will
|
|
be a limit to the number of these temporary jobs that may be stored, and
|
|
when the limit is exceeded the oldest job will be removed from the disk.
|
|
|
|
PROOF: One copy of the job is printed and remaining copies are stored
|
|
on disk. The job is then available to select for printing via the
|
|
control panel menus or PML. The job will be deleted from the disk when
|
|
the disk space is needed for another proof and hold job but only after
|
|
the additional copies have been printed. It will also be deleted when
|
|
the user sends down another proof and hold job with the same job name,
|
|
or the user explicitly deletes the job.
|
|
|
|
STORE: The job is not printed immediately but is retained on disk. The
|
|
job is available to select for printing via the control panel
|
|
|
|
DEFAULT VALUE: OFF
|
|
|
|
The value will be stored in RAM only, not in NVRAM.
|
|
The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
|
|
The variable will appear in the PJL INFO VARIABLES list.
|
|
|
|
@PJL SET USERNAME=<80 bytes>
|
|
|
|
GENERAL DESCRIPTION:
|
|
|
|
Eighty-character user name that is obtained by the driver through some
|
|
internal method or from user input. If the job stream does not contain
|
|
a USERNAME the default value will be NO USER NAME. The driver is
|
|
responsible for determining the size of the printers control panel and
|
|
sending a string of appropriate length.
|
|
|
|
DEFAULT VALUE: NO USER NAME
|
|
|
|
The value will be stored in RAM only, not in NVRAM.
|
|
The legal PJL commands are SET and, INQUIRE. DEFAULT is not allowed.
|
|
The variable will appear in the PJL INFO VARIABLES list.
|
|
|
|
@PJL SET JOBNAME=<80 bytes>
|
|
|
|
GENERAL DESCRIPTION:
|
|
|
|
Eighty-character job name that may be generated by the driver or
|
|
obtained from user input. This value may be used in conjunction with
|
|
the USERNAME to select a job from the front panel. If the job stream
|
|
does not contain a JOBNAME, the printer will assume no job name; each
|
|
subsequent job that is sent down by the same user would replace the
|
|
users last job on disk. The driver is responsible for determining the
|
|
size of the printers control panel and sending a string of appropriate
|
|
length.
|
|
|
|
NOTE: The limit of 80 bytes is a PJL limit. The limit for PML will
|
|
be 40 bytes.
|
|
|
|
DEFAULT VALUE: NULL STRING
|
|
|
|
The value will be stored in RAM only, not in NVRAM.
|
|
The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
|
|
The variable will appear in the PJL INFO VARIABLES list.
|
|
|
|
@PJL SET HOLDTYPE=PUBLIC|PRIVATE
|
|
|
|
GENERAL DESCRIPTION:
|
|
|
|
This variable specifies the privacy level of the job.
|
|
|
|
PUBLIC: The job does not require a PIN in order to be released for
|
|
printing. This is the default value.
|
|
|
|
PRIVATE: The job requires a PIN in order to be released for printing.
|
|
The PIN is specified by the HOLDKEY variable. If the
|
|
|
|
HOLDTYPE is set to PRIVATE, a HOLDKEY value must be specified. If no
|
|
HOLDKEY is specified, the job will be considered PUBLIC.
|
|
|
|
DEFAULT VALUE: PUBLIC
|
|
|
|
The value will be stored in RAM only, not in NVRAM.
|
|
The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
|
|
The variable will appear in the PJL INFO VARIABLES list.
|
|
|
|
@PJL SET HOLDKEY=4 digits, 0000...9999
|
|
|
|
GENERAL DESCRIPTION:
|
|
|
|
A 4-digit string, each digit 0-9, that is specified in the job stream
|
|
and then required to be entered in order to release the job for
|
|
printing. If a HOLDTYPE is PRIVATE, a HOLDKEY value must be specified.
|
|
If no HOLDKEY value is specified, a job will be considered PUBLIC.
|
|
|
|
DEFAULT VALUE: NULL STRING
|
|
|
|
The value will be stored in RAM only, not in NVRAM.
|
|
The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
|
|
The variable will appear in the PJL INFO VARIABLES list.
|
|
|
|
|
|
The format for the OID is as follows:
|
|
|
|
3.4.1.6.x.y
|
|
<-----> | |
|
|
| | \
|
|
/ | job-id in the system
|
|
/ \
|
|
PML_JOB_MGNT_ROOT_OID \
|
|
job attribute 1..6
|
|
|
|
x values are 1..6:
|
|
|
|
1) user-name: user name that is obtained by the driver through some
|
|
internal method or from user input.
|
|
|
|
2) job-name: job name may be generated by the driver or obtained from
|
|
user input.
|
|
|
|
3) hold: indicates the retention classification of the job. The values
|
|
indicate whether the job is printed immediately and/or stored. There
|
|
are 4 options:
|
|
OFF: The job is printed but not retained on the disk.
|
|
ON: The job is printed and stored temporarily on the disk.
|
|
STORE: The job is not printed but stored on the disk.
|
|
PROOF: One copy of the job is printed and the remaining copies are
|
|
stored on the disk.
|
|
|
|
4) holdtype: The variable specifies the security level of the job.
|
|
PUBLIC: The job does not require a PIN in order to release the job for
|
|
printing.
|
|
PRIVATE: The job requires a PIN in order to be released for printing.
|
|
|
|
5) quantity: number of copies to print. Valid values are 0..999.
|
|
|
|
6) pin: A 4 digit string, each digit is 0-9, that is specified in the
|
|
job stream and then required to be entered in order to release the job
|
|
for printing.
|
|
|
|
y : an unsigned 32-bit number which uniquely identifies the job. The job
|
|
id for the job remains the same for the job until it is deleted from the
|
|
held jobs list.
|
|
|
|
|
|
For example, the OID below is asking for the user name of the
|
|
job whose id is 3. The application would issue:
|
|
|
|
OID
|
|
get 3.4.1.6.1.3
|
|
|
|
For example, the <getnext> OID values sequence is as follows:
|
|
|
|
OID returned OID
|
|
getnext 3.4.1.6 3.4.1.6.1.1
|
|
getnext 3.4.1.6.1.1 3.4.1.6.1.2
|
|
getnext 3.4.1.6.2.1 3.4.1.6.2.2
|
|
***
|
|
getnext 3.4.1.6.1.6 3.4.1.6.1.7
|
|
getnext 3.4.1.6.2.1 3.4.1.6.2.2
|
|
getnext 3.4.1.6.5.2828 3.4.1.6.6.1
|
|
|
|
NOTE: for example above, job id 2828 is the last job in the list of
|
|
held jobs.
|
|
***
|
|
|
|
Also supported is <getnext> on the job attributes:
|
|
OID returned OID
|
|
getnext 3.4.1.6.1 3.4.1.6.1.1
|
|
getnext 3.4.1.6.6 3.4.1.6.6.1"
|
|
::= { held-job-info 1 }
|
|
|
|
|
|
held-job-job-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The job name may be generated by the driver or obtained from
|
|
user input."
|
|
::= { held-job-info 2 }
|
|
|
|
|
|
held-job-retention OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eHoldOff(1),
|
|
eHoldOn(2),
|
|
eHoldStore(3),
|
|
eHoldProof(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates the retention classification of the job. The values
|
|
indicate whether the job is printed immediately or stored.
|
|
There are 4 options:
|
|
eHoldOff: The job is printed but not retained on the disk.
|
|
|
|
eHoldOn: The job is printed and stored temporarily on the
|
|
disk.
|
|
eHoldStore: The job is not printed but stored on the disk.
|
|
|
|
eHoldProof: One copy of the job is printed and the
|
|
remaining copies are stored on the disk. "
|
|
::= { held-job-info 3 }
|
|
|
|
|
|
held-job-security OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eHoldTypePublic(1),
|
|
eHoldTypePrivate(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The variable specifies the security level of the job.
|
|
eHoldTypePublic: The job does not require a PIN in order to
|
|
release the job for printing.
|
|
eHoldTypePrivate: The job requires a PIN in order to be
|
|
released for printing. "
|
|
::= { held-job-info 4 }
|
|
|
|
|
|
held-job-quantity OBJECT-TYPE
|
|
SYNTAX INTEGER(1..999)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of copies to print."
|
|
::= { held-job-info 5 }
|
|
|
|
|
|
held-job-pin OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..4))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A string that is specified in the job stream and then required
|
|
to be entered in order to release the job for printing. PIN
|
|
stands for Personal Identification Number.
|
|
Additional information:
|
|
Must be a 4 digit string, each digit must be 0..9 or a null string
|
|
if there is no pin.
|
|
For security purposes, you can no longer get the value of the PIN."
|
|
::= { held-job-info 6 }
|
|
|
|
|
|
held-job-print OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(12))
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Instructs the printer to schedule the specified held job for
|
|
printing with the specified number of copies. The job-id is
|
|
used to identify which job to print. A held job can also be
|
|
printed from the control panel.
|
|
Additional information:
|
|
Bytes 0-3 is the job id of the job to print.
|
|
Bytes 4-7 is the number of copies to print.
|
|
Bytes 8-11 (optional) contain the PIN for
|
|
a Private job. "
|
|
::= { held-job-control 1 }
|
|
|
|
|
|
held-job-delete OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Instructs the printer to delete the specified held job from the
|
|
list. The job-id is used to identify which job to delete. A
|
|
held job can also be deleted from the control panel.
|
|
Additional information:
|
|
Setting this to a value that is not a Held Job on the
|
|
system or is a Private Held Job returns <ErrUnsupValue>.
|
|
To delete a private Held Job, you must use the PML object
|
|
HELD-JOB-PRINT with a quantity of 0 and supply the correct
|
|
HELD-JOB-PIN with the request. (See HELD-JOB-PRINT)"
|
|
::= { held-job-control 2 }
|
|
|
|
|
|
held-job-set-queue-size OBJECT-TYPE
|
|
SYNTAX INTEGER(0..100)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Sets the maximum number of jobs which can be stored in the held
|
|
job list.
|
|
Additional information:
|
|
Sets the size of the temporary job lists queue."
|
|
::= { held-job-control 3 }
|
|
|
|
|
|
held-job-enable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eDisabled(1),
|
|
eEnabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Enables or disables Job Retention (Job Hold). The valid values
|
|
are eDisabled and eEnabled. (Specifying an invalid mode causes
|
|
an <badValue> error to be returned.) When
|
|
eDisabled is specified all Job Retention (Hold, Proof, Store,
|
|
PIN Printing) is disabled. When eEnabled is specified, the Job
|
|
Retention characteristics of a given job are defined by the PJL
|
|
variable SET HOLD.
|
|
Additional information:
|
|
When disabled, held jobs are not removed,
|
|
but must be explicitly removed through the Control Panel
|
|
or the PML object HELD-JOB-DELETE."
|
|
::= { held-job-control 4 }
|
|
|
|
|
|
mopy-mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOff(1),
|
|
eStandard(4),
|
|
eEnhanced(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Controls or reports how mopies are generated. eOff turns off
|
|
the mopy feature. eAuto allows the device to determine the best
|
|
method for generating mopies based on the device configuration.
|
|
eStandard spools the I/O data and replays the I/O data multiple
|
|
times to generate the mopies. eEnhanced spools the rasterized
|
|
page images and replays the rasterized data to generate the
|
|
mopies. Typically, the rasterized data will be larger and will
|
|
allow all but the first mopy to print at speed. If the job
|
|
being mopied is not extremely complex, then the first mopy will
|
|
print at speed also."
|
|
::= { settings-spooler 1 }
|
|
|
|
|
|
default-vertical-black-resolution OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the value of the default vertical black
|
|
resolution. The units are dots per inch.
|
|
Additional information:
|
|
In LaserJet 8100 changing this OID also causes
|
|
DEFAULT-HORIZONTAL-BLACK RESOLUTION to change.
|
|
DEFAULT-HORIZONTAL-BLACK-RESOLUTION and
|
|
DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the
|
|
same. The supported values are:
|
|
LaserJet 4100: 300, 600, 1200
|
|
Color Products: 600
|
|
LaserJet 9000: 300, 600
|
|
Setting to an unsupported value causes the printer
|
|
to substitute in a snap value and
|
|
to return <noError> status.
|
|
The snap values are as follow:
|
|
LaserJet 4100:
|
|
|
|
450 >= n < 900 snaps to 600
|
|
n >= 900 snaps to 1200
|
|
Color Products:
|
|
n snaps to 600
|
|
LaserJet 9000:
|
|
n < 450 snaps to 300
|
|
n >=450 snaps to 600 "
|
|
::= { settings-pdl 8 }
|
|
|
|
|
|
default-horizontal-black-resolution OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the value of the default horizontal black
|
|
resolution. The units are dots per inch.
|
|
Additional information:
|
|
In LaserJet 8100 changing this object also causes
|
|
DEFAULT-VERTICAL-BLACK RESOLUTION to change.
|
|
DEFAULT-HORIZONTAL-BLACK-RESOLUTION and
|
|
DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the
|
|
same. The supported values are:
|
|
LaserJet 4100: 300, 600, 1200
|
|
Color Products: 600
|
|
LaserJet 9000: 300, 600
|
|
Setting to an unsupported value causes the printer
|
|
to substitute in a snap value and to
|
|
return <noError> status.
|
|
The snap values are as follow:
|
|
LaserJet 4100:
|
|
n < 450 snaps to 300
|
|
450 >= n < 900 snaps to 600
|
|
n >= 900 snaps to 1200
|
|
Color Products:
|
|
n snaps to 600
|
|
LaserJet 9000:
|
|
n < 450 snaps to 300
|
|
n >=450 snaps to 600 "
|
|
::= { settings-pdl 9 }
|
|
|
|
|
|
default-page-protect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOn(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the default page protection behavior. If
|
|
eOff, the device does not reserve memory for holding the entire
|
|
raster form of a processed page. If eOn, then memory is
|
|
reserved. If eAuto, the device determines the amount of memory
|
|
to reserve.
|
|
Additional information:
|
|
Setting to eOn causes MET to be more conservative, but
|
|
it will not allocate memory to hold an entire
|
|
rasterized page."
|
|
::= { settings-pdl 10 }
|
|
|
|
|
|
default-bits-per-pixel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Controls the number of levels used (per pixel) when printing
|
|
grayscale or color images."
|
|
::= { settings-pdl 39 }
|
|
|
|
|
|
|
|
|
|
mio1-model-name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns product information identifying the I/O card. Example:
|
|
XXXX."
|
|
::= { mio1 2 }
|
|
|
|
|
|
mio1-manufacturing-info OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns information describing the manufacture of the I/O card
|
|
installed in MIO/EIO slot 1. May include serial number and
|
|
firmware revision.
|
|
Additional information:
|
|
The format of the string returned is determined by
|
|
the manufacturer of the EIO device. There is no standard for
|
|
content of the string."
|
|
::= { mio1 3 }
|
|
|
|
|
|
mio1-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eDiskDrive(8),
|
|
eIOCard(12)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in
|
|
MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the
|
|
enumerations."
|
|
::= { mio1 4 }
|
|
|
|
|
|
mio2-model-name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns product information identifying the I/O card. Example:
|
|
XXXX."
|
|
::= { mio2 2 }
|
|
|
|
|
|
mio2-manufacturing-info OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns information describing the manufacture of the I/O card
|
|
installed in MIO/EIO slot 2. May include serial number and
|
|
firmware revision.
|
|
Additional information:
|
|
The format of the string returned is determined by
|
|
the manufacturer of the EIO device. There is no standard for
|
|
content of the string."
|
|
::= { mio2 3 }
|
|
|
|
|
|
mio2-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eDiskDrive(8),
|
|
eIOCard(12)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in
|
|
MIO/EIO slot 2. See SIMM1-TYPE for an explanation of the
|
|
enumerations."
|
|
::= { mio2 4 }
|
|
|
|
|
|
mio3-model-name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns product information identifying the I/O card. Example:
|
|
XXXX."
|
|
::= { mio3 2 }
|
|
|
|
|
|
mio3-manufacturing-info OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns information describing the manufacture of the I/O card
|
|
installed in MIO/EIO interface 3. May include serial number and
|
|
firmware revision.
|
|
Additional information:
|
|
The format of the string returned is determined by
|
|
the manufacturer of the EIO device. There is no standard for
|
|
content of the string."
|
|
::= { mio3 3 }
|
|
|
|
|
|
mio3-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eEmpty(1),
|
|
eUnknown(2),
|
|
eDiskDrive(8),
|
|
eIOCard(12)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in
|
|
MIO/EIO interface 3. See SIMM1-TYPE for an explanation of the
|
|
enumerations."
|
|
::= { mio3 4 }
|
|
|
|
|
|
io-timeout OBJECT-TYPE
|
|
SYNTAX INTEGER(5..300)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The amount of time, in seconds, to wait for more print job data
|
|
to be received before an I/O timeout occurs. The I/O channel
|
|
being timed is the I/O channel that received the data
|
|
associated with the current print job. If an I/O timeout
|
|
occurs, the PDL processing sub-system assumes all the data
|
|
associated with the current print job has been received, and
|
|
processes the end of job in a PDL specific manner. The POS
|
|
specifies the supported values.
|
|
Additional information:
|
|
If an I/O timeout occurs,the PDL processing
|
|
sub-system will consider it an end of job condition only
|
|
if there is data from another I/O subsystem waiting to be
|
|
processed.
|
|
The supported values are 5 to 300 seconds.
|
|
Setting to a value outside the supported range returns
|
|
<noError> status and the
|
|
value will be snapped to the nearest supported value."
|
|
::= { settings-io 1 }
|
|
|
|
|
|
io-switch OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eYes(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates if the device will switch between I/O channels when a
|
|
job boundary is encountered and print job data is available on
|
|
another I/O channel."
|
|
::= { settings-io 2 }
|
|
|
|
|
|
port1-parallel-speed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eSlow(1),
|
|
eFast(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes the maximum parallel I/O port speed, for
|
|
port 1. This object is only supported if this port is a
|
|
parallel port. An eSlow setting causes a 10 us busy pulse per
|
|
received byte of data. An eFast setting causes a 1.5 us busy
|
|
pulse per received byte of data. In rare cases, setting this
|
|
value to eFast can cause the parallel port to no longer
|
|
transfer data reliably.
|
|
Additional information:
|
|
When the value of this object is changed, it takes
|
|
effect immediately. It is recommended that the printer
|
|
be offline and not in a job when this object is changed."
|
|
::= { port1 4 }
|
|
|
|
|
|
port1-parallel-bidirectionality OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUnidirectional(1),
|
|
eBidirectional(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes whether the parallel I/O port supports
|
|
bidirectional communication for port 1. This object is only
|
|
supported if this port is a parallel port.
|
|
Additional information:
|
|
A get on this object returns the current mode
|
|
for the parallel port. Setting this object specifies whether
|
|
or not bidirectional communications will be allowed."
|
|
::= { port1 5 }
|
|
|
|
|
|
channelnumberofchannels OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An indication of how many print data channels the I/O card
|
|
supports.
|
|
Additional information:
|
|
This object is used by the IIO card to tell the peripheral
|
|
firmware how many logical channels will be used by the card.
|
|
This object can only be set once per physical channel. If
|
|
an attempt is made to set it a subsequent time it is ignored
|
|
and an return code of <ErrorActionCanNotBePerformedNow.is returned.
|
|
|
|
If new firmware is dynamically downloaded to the Blazers Plus
|
|
card, and if that firmware uses more logical channels, it is
|
|
necessary to reset the printer."
|
|
::= { channel 1 }
|
|
|
|
|
|
channelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ChannelEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
::= { channel 3 }
|
|
|
|
|
|
channelEntry OBJECT-TYPE
|
|
SYNTAX ChannelEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
INDEX { channelindex }
|
|
::= { channelTable 1 }
|
|
|
|
|
|
ChannelEntry ::= SEQUENCE {
|
|
channelindex INTEGER,
|
|
channeltype INTEGER,
|
|
channelprotocolversion OCTET STRING,
|
|
channelstate INTEGER,
|
|
channelifindex INTEGER,
|
|
channelstatus INTEGER,
|
|
channelinformation OCTET STRING
|
|
}
|
|
|
|
|
|
channeltype OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eChOther(1),
|
|
eChAppleTalkPAP(7),
|
|
eChLPDServer(8),
|
|
eChNetwareRPrinter(9),
|
|
eChNetwarePServer(10),
|
|
eChPort9100(11),
|
|
eChDLCLLCPort(15),
|
|
eChBidirPortTCP(38)
|
|
}
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Identifies the type of MIO print data channel.
|
|
Additional information:
|
|
After telling the peripheral how many logical channels will
|
|
be used, the IIO card tells the printer the type of each of
|
|
the channels. The type information is passed using the
|
|
channelType object. Values are then saved by the peripheral
|
|
and reported when users request the value of
|
|
prtChannelType."
|
|
::= { channelEntry 2 }
|
|
|
|
|
|
channelprotocolversion OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The version of the protocol used on this MIO print data
|
|
channel.
|
|
Additional information:
|
|
After telling the peripheral how many logical channels will
|
|
be used, the IIO card tells the printer the protocol version
|
|
of each of the channels. The protocol version information is
|
|
passed using the channelProtocolVersion object. Values are
|
|
then saved by the peripheral and reported when users request
|
|
the value of prtChannelProtocolVersion."
|
|
::= { channelEntry 3 }
|
|
|
|
|
|
channelstate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eChOther(1),
|
|
eChPrintDataAccecped(3),
|
|
eChNoDataAccepted(4)
|
|
}
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The state of this print data channel. The value determines
|
|
whether control information and print data is allowed through
|
|
this channel or not.
|
|
Additional information:
|
|
After telling the peripheral how many logical channels will
|
|
be used, the IIO card tells the printer the state of each of
|
|
the channels. The state can change from time to time. The
|
|
state information is passed using the channelState object.
|
|
Values are saved by the peripheral and reported when users
|
|
request the value of prtChannelState."
|
|
::= { channelEntry 4 }
|
|
|
|
|
|
channelifindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The value of ifIndex which corresponds to this channel.
|
|
Additional information:
|
|
After telling the peripheral how many logical channels will
|
|
be used, the IIO card tells the printer the value of the
|
|
IfIndex for each channel. The IfIndex is used as part of
|
|
MIB-II. The values are saved by the peripheral and reported
|
|
when users request the value of prtChannelIfIndex."
|
|
::= { channelEntry 5 }
|
|
|
|
|
|
channelstatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Sub-unit status is reported in the entries of the principle
|
|
table in the Group that represents the sub-unit. For sub-units
|
|
that report a status, there is a status column in the table and
|
|
the value of this column is always an integer formed in the
|
|
following way. The SubUnitStatus is an integer that is the sum
|
|
of 5 distinct values, Availability, Non-Critical, Critical,
|
|
On-line, and Transitioning. These values are:
|
|
Availability value
|
|
Available and Idle 0 000'b
|
|
Available and Standby 2 010'b
|
|
Available and Active 4 100'b
|
|
Available and Busy 6 110'b
|
|
Unavailable and OnRequest 1 001'b
|
|
Unavailable because Broken 3 011'b
|
|
Unknown 5 101'b
|
|
Non-Critical
|
|
No Non-Critical Alerts 0
|
|
Non-Critical Alerts 8
|
|
Critical
|
|
No Critical Alerts 0
|
|
Critical Alerts 16
|
|
On-Line
|
|
Intended state is On-Line 0
|
|
Intended state is Off-Line 32
|
|
Transitioning
|
|
At intended state 0
|
|
Transitioning to intended state 64.
|
|
Additional information:
|
|
After telling the peripheral how many logical channels will
|
|
be used, the IIO card tells the printer the status of each of
|
|
the channels. The status can change from time to time. The
|
|
status information is passed using the channelStatus object.
|
|
Values are saved by the peripheral and reported when users
|
|
request the value of prtChannelStatus."
|
|
::= { channelEntry 6 }
|
|
|
|
|
|
channelinformation OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Auxiliary information to allow a printing application to use
|
|
the channel for data submission to the printer. An application
|
|
capable of using a specific PrtChannelType should be able to
|
|
use the combined information from the prtChannelInformation and
|
|
other channel and interface group objects to 'bootstrap' its
|
|
use of the channel. prtChannelInformation is not intended to
|
|
provide a general channel description, nor to provide
|
|
information that is available once the channel is in use. The
|
|
encoding and interpretation of the prtChannelInformation object
|
|
is specific to channel type. The description of each
|
|
prtChannelType enum value for which prtChannelInformation is
|
|
defined specifies the appropriate encoding and interpretation,
|
|
including interaction with other objects. For channel types
|
|
that do not specify a prtChannelInformation value, its value
|
|
shall be null (0 length). When a new prtChannelType enumeration
|
|
value is registered, its accompanying description must specify
|
|
the encoding and interpretation of the prtChannelInformation
|
|
value for the channel type. prtChannelInformation semantics for
|
|
an existing PrtChannelType may be added or amended in the same
|
|
manner as described in section 2.4.1 for type 2 enumeration
|
|
values. The prtChannelInformation specifies values for a
|
|
collection of channel attributes, represented as text according
|
|
to the following rules:
|
|
1. The prtChannelInformation is coded in the NVT ASCII
|
|
character set. It is not affected by localization.
|
|
2. The prtChannelInformation is a list of entries
|
|
representing the attribute values. Each entry consists
|
|
of the following items, in order:
|
|
a. a keyword, composed of alphabetic characters (A-Z, a-z),
|
|
that identifies a channel attribute,
|
|
b. an Equals Sign (=) to delimit the keyword,
|
|
c. a data value, consisting of NVT ASCII graphics
|
|
characters (codes 32-126),
|
|
d. a Line Feed character (code 10) to delimit the data
|
|
value.
|
|
No other characters shall be present. Keywords are
|
|
case-sensitive. Conventionally, keywords are
|
|
capitalized (including each word of a multi-word
|
|
keyword), and, since they occupy space in the
|
|
prtChannelInformation, they are kept short.
|
|
3. If a channel attribute has multiple values, it is
|
|
represented by multiple entries with the same keyword,
|
|
each specifying one value. Otherwise, there shall be at
|
|
most one entry for each attribute.
|
|
4. By default, entries may appear in any order. If there
|
|
are ordering constraints for particular entries, these
|
|
must be specified in their definitions.
|
|
5. The prtChannelInformation value may represent
|
|
information that is not normally coded in textual form,
|
|
or that is coded in a character set other than NVT
|
|
ASCII. In these cases, whatever symbolic representation
|
|
is conventionally used for the information should be
|
|
used for encoding the prtChannelInformation. (For
|
|
instance, a binary port value might be represented as a
|
|
decimal number, Unicode would be represented in UTF-8
|
|
format.)
|
|
6. For each PrtChannelType for which prtChannelInformation
|
|
entries are defined, the descriptive text associated
|
|
with the PrtChannelType enumeration value shall specify
|
|
the following information for each entry:
|
|
Title: Brief description phrase, e.g.: 'Port name,'Service
|
|
Name,'
|
|
Keyword: The keyword value, eg: 'Port,' 'Service' Syntax:
|
|
The encoding of the entry value, if it cannot be
|
|
directly represented by NVT ASCII,
|
|
Status: 'Mandatory,' 'Optional,' or 'Conditionally
|
|
Mandatory,'
|
|
Multiplicity: 'Single' or 'Multiple,' to indicate whether
|
|
the entry may be present multiple times,
|
|
Description: Description of the use of the entry, other
|
|
information required to complete the definition (e.g.:
|
|
ordering contstraints, interactions between entries).
|
|
|
|
Applications that interpret prtChannelInformation should ignore
|
|
unrecognized entries, so they are not affected if new entry
|
|
types are added.
|
|
Additional information:
|
|
After telling the peripheral how many logical channels will
|
|
be used, the IIO card tells the printer the value of the information
|
|
value of each of the channels. The information is auxiliary
|
|
information used in conjunction with the channel Type."
|
|
::= { channelEntry 7 }
|
|
|
|
|
|
deviceChannelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DeviceChannelEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
::= { tables 2 }
|
|
|
|
|
|
deviceChannelEntry OBJECT-TYPE
|
|
SYNTAX DeviceChannelEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
INDEX { channel-index }
|
|
::= { deviceChannelTable 1 }
|
|
|
|
|
|
DeviceChannelEntry ::= SEQUENCE {
|
|
channel-index INTEGER,
|
|
channel-bytes-sent INTEGER,
|
|
channel-bytes-received INTEGER,
|
|
channel-io-errors INTEGER,
|
|
channel-jobs-received INTEGER,
|
|
channel-mio INTEGER
|
|
}
|
|
|
|
|
|
channel-bytes-sent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The low order 31 bits of the number of bytes sent from the
|
|
printer to the host on this logical channel."
|
|
::= { deviceChannelEntry 2 }
|
|
|
|
|
|
channel-bytes-received OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The low order 31 bits of the number of bytes received by the
|
|
printer from the host on this logical channel."
|
|
::= { deviceChannelEntry 3 }
|
|
|
|
|
|
channel-io-errors OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The low order 31 bits of the number of I/O errors which have
|
|
occured on this logical channel."
|
|
::= { deviceChannelEntry 4 }
|
|
|
|
|
|
channel-jobs-received OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The low order 31 bits of the number of print jobs which have
|
|
been received on this logical channel."
|
|
::= { deviceChannelEntry 5 }
|
|
|
|
|
|
channel-mio OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of the MIO card associated with this logical
|
|
channel. If this logical channel is not associated with an MIO
|
|
card a zero is returned. The value returned for each logical
|
|
channel is the MIO card's physical slot number. The list of
|
|
supported values should be documented in the device POS.
|
|
Additional information:
|
|
The value returned will be zero for channels 1..3.
|
|
If an MIOA card is installed, channels 4..10 will
|
|
return a value of one or two.
|
|
If an MIOB card is installed, channels 11..17 will
|
|
return a value of one or two but not the
|
|
same as channels 4..10.
|
|
When two IIO cards are installed, the value
|
|
returned by any channel 4..17 may change after the
|
|
printer is power cycled."
|
|
::= { deviceChannelEntry 6 }
|
|
|
|
|
|
rpc-bind-protocol-address OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Array of Berkeley sockets style protocol addresses used to bind
|
|
RPC to a communications protocol family. Setting an instance of
|
|
this array object to a zero length binary value disables the
|
|
transport protocol indicated by that instance. All multi-bytes
|
|
fields are in network (or big-endian) order. Bytes 1 and 2
|
|
indicate the transport protocol. Some of the transport protocol
|
|
mapping information can be found in RFC 1010 Assigned Numbers.
|
|
A list of interesting transport protocol number mappings
|
|
include:
|
|
<table>
|
|
Protocol | Number
|
|
---------+-------
|
|
UDP/IP | 17
|
|
IPX | 1000
|
|
MLC | 4660
|
|
</table>
|
|
Bytes 3 and 4 indicate the address family. The address
|
|
family uses the same mapping as the BSD sockets address
|
|
family. A list of interesting address family mappings
|
|
include:
|
|
<table>
|
|
Address Family | Number
|
|
---------------+-------
|
|
Internet | 2
|
|
NetWare | 6
|
|
MLC | 22136
|
|
</table>
|
|
The format the fifth and following bytes is dependent on the
|
|
address family. For the Internet address family, bytes 5 and 6
|
|
contain the port number, bytes 7 through 10 contain the IP
|
|
address, and the following eight bytes are unused. For NetWare,
|
|
bytes 5 through 8 are the network number, bytes 9 through 14
|
|
are the node number, and bytes 15 and 16 are the socket
|
|
number.
|
|
Additional information:
|
|
The length of the binary value is zero
|
|
if the instance of an object in the rpc-bind-protocol-address
|
|
array is not in use.
|
|
Returns <noSuchName>
|
|
status if attempting to access this object and there
|
|
is no storage device is installed."
|
|
::= { settings-rpc 2 }
|
|
|
|
|
|
rpc-bound-protocol-address OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An array of Berkeley sockets style protocol addresses that the
|
|
NFS service has been bound to successful. The format is that
|
|
same as the array of RPC-BIND-PROTOCOL-ADDRESS of objects.
|
|
Additional information:
|
|
Returns <noSuchName>
|
|
status if attempting to access this object and there
|
|
is no storage device is installed."
|
|
::= { status-rpc 3 }
|
|
|
|
|
|
file-system-max-open-files OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of open files allowed at one time. Opening a file
|
|
when the maximum number of files are currently open will fail.
|
|
Additional information:
|
|
Indicates the number of open files a
|
|
personality (e.g. PCL or PostScript) is guaranteed to be
|
|
able to open before the file system runs out of file handles.
|
|
This object is between 1 and 500.
|
|
Returns <noSuchName>
|
|
status if attempting to access this object and there
|
|
is no storage device is installed."
|
|
::= { settings-file-system 2 }
|
|
|
|
|
|
file-system-set-system-partition-writeable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object allows the system partition to be written to. It
|
|
consists of a C structure containing the following fields:
|
|
typedef struct {
|
|
ubyte password[8];
|
|
ubyte volumenumber;
|
|
} fs_writeable_system_partition_t;
|
|
which is described below:
|
|
Bytes 0 - 7: contain the password
|
|
Byte 8 : is the volume number
|
|
Access to this command is controlled by the password. If the
|
|
password supplied is incorrect the command will fail. The
|
|
volumenumber is a volume number of an existing system
|
|
partition.
|
|
Additional information:
|
|
Returns <noSuchName>
|
|
status if attempting to access this object and there
|
|
is no storage device is installed.
|
|
Returns <badValue> if the password is incorrect or if
|
|
the volume requested is not present."
|
|
::= { settings-file-system 6 }
|
|
|
|
|
|
file-system-set-system-partition-readonly OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Changes a system partition to be READ-ONLY. The value is the
|
|
volume number to change. If the volume number specified is NOT
|
|
a system partition an error is returned.
|
|
Additional information:
|
|
Returns <noSuchName>
|
|
status if attempting to access this object and there
|
|
is no storage device is installed.
|
|
Returns <badValue> if the volume requested
|
|
is not present."
|
|
::= { settings-file-system 7 }
|
|
|
|
|
|
file-system-delete-files OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Setting this object causes the specified filename to be
|
|
deleted, after first validating that the authentication data is
|
|
correct for the specified user ID.
|
|
The format for this object is a C structure:
|
|
typedef struct {
|
|
sint32 UserId;
|
|
uint16 AuthenticationDataLen
|
|
ubyte AuthenticationData[]
|
|
char Filename[];
|
|
} fs_delete_files_t;
|
|
which is described below:
|
|
Bytes 0 - 3: contains a user id represented as a multi-byte
|
|
value that is stored in big-endian format, where the
|
|
most significant byte occurs first.
|
|
Bytes 4 - 5 : Length of the Athentication data that follows
|
|
starting at offset 6. Stored as a multi-byte value that
|
|
is stored in big-endian format, where the most
|
|
significant byte occurs first.
|
|
Bytes 6 - 6+AuthenticationDataLen : a ubyte array
|
|
containing the Authentication data used to verify
|
|
access for this operation.
|
|
Bytes starting at offset (6+AuthenticationDataLen+1): A
|
|
null terminated character array representing the ASCII
|
|
file name to be deleted. The length of the string will
|
|
be limited by the remaining space in the object.
|
|
This string represents a fully-qualified path name which may
|
|
specify a filename or a regular expression that may match
|
|
multiple files (e.g <path>/*.exe). Access to this command is
|
|
controlled by the UserId and the authentication data. If the
|
|
UserID or authentication data supplied is incorrect the command
|
|
will fail. The device POS will specify any limitations to the
|
|
length of the filename string, what constitutes a correct user
|
|
ID, what constitutes correct authentication data, and the
|
|
significance of any return values.
|
|
Additional information:
|
|
Setting this object causes the specified filename
|
|
to be deleted, after first validating that the
|
|
authentication data is correct for the specified
|
|
user ID. This object is always present.
|
|
|
|
The format for this object is a C structure:
|
|
|
|
typedef struct {
|
|
sint32 UserId;
|
|
uint16 AuthenticationDataLen
|
|
ubyte AuthenticationData[]
|
|
char Filename[];
|
|
} fs_delete_files_t;
|
|
|
|
Bytes 0 - 3: contains a user id represented
|
|
as a multi-byte value that is stored in big-endian
|
|
format, where the most significant byte occurs first.
|
|
|
|
Bytes 4 - 5 : Length of the authentication data that
|
|
follows starting at offset 6. Stored as a multi-byte
|
|
value that is stored in big-endian format, where the
|
|
most significant byte occurs first.
|
|
|
|
Bytes 6 - 6+AuthenticationDataLen : a ubyte array
|
|
containing the authentication data used to verify
|
|
access for this operation.
|
|
|
|
Bytes starting at offset (6+AuthenticationDataLen+1):
|
|
A null terminated character array representing the
|
|
ASCII file name to be deleted. The length of the
|
|
string will be limited by the remaining space in the
|
|
object. This string represents a fully-qualified path
|
|
name which may specify a filename or a file-type regular
|
|
expression that may match multiple files (e.g.,
|
|
<path>/*.exe).
|
|
|
|
Access to this command is controlled by the UserId
|
|
and the authentication data. If the UserID or
|
|
authentication data supplied is incorrect the
|
|
command will fail.
|
|
|
|
The device POS will specify any limitations to the
|
|
length of the filename string, what constitutes a
|
|
correct user ID, what constitutes correct
|
|
authentication data, and the significance of any
|
|
return values."
|
|
::= { settings-file-system 8 }
|
|
|
|
|
|
file-system2-initialize-volume OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eInitializing(2)
|
|
}
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Setting this object to eInitializing causes file system 2 to be
|
|
initialized. Reading this object indicates if the file system
|
|
is currently being initialized.
|
|
Additional information:
|
|
The hrDeviceIndex value for the mass storage
|
|
device is the same value that is used to index into the
|
|
FILE-SYSTEM sub-tree. Since this product supports
|
|
up to 3 physical mass storage device, and since the hrDeviceIndex
|
|
for the mass storage devices will start at 2 if the mass
|
|
storage device is installed, the FILE-SYSTEM2-INITIALIZE-VOLUME
|
|
object will be the object that allows the mass storage device to be
|
|
initialized that is the 1st device."
|
|
::= { file-system2 6 }
|
|
|
|
|
|
file-system3-initialize-volume OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eInitializing(2)
|
|
}
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Setting this object to eInitializing causes file system 3 to be
|
|
initialized. Reading this object indicates if the file system
|
|
is currently being initialized.
|
|
Additional information:
|
|
The hrDeviceIndex value for the mass storage
|
|
device is the same value that is used to index into the
|
|
FILE-SYSTEM sub-tree. Since this product supports
|
|
up to 3 physical mass storage device, and since the hrDeviceIndex
|
|
for the mass storage devices will start at 2 if the mass
|
|
storage device is installed, the FILE-SYSTEM3-INITIALIZE-VOLUME
|
|
object will be the object that allows the mass storage device to be
|
|
initialized that is the 2nd device."
|
|
::= { file-system3 6 }
|
|
|
|
|
|
file-system4-initialize-volume OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eInitializing(2)
|
|
}
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Setting this object to eInitializing causes file system 4 to be
|
|
initialized. Reading this object indicates if the file system
|
|
is currently being initialized.
|
|
Additional information:
|
|
The hrDeviceIndex value for the mass storage
|
|
device is the same value that is used to index into the
|
|
FILE-SYSTEM sub-tree. Since this product supports
|
|
up to 3 physical mass storage devices, and since the hrDeviceIndex
|
|
for the mass storage devices will start at 2 if the mass
|
|
storage device is installed, the FILE-SYSTEM4-INITIALIZE-VOLUME
|
|
object will be the object that allows the mass storage device to be
|
|
initialized that is the 3rd device."
|
|
::= { file-system4 6 }
|
|
|
|
|
|
mass-storage-resource-change-counter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A counter which changes when a mass storage based resource has
|
|
been added or deleted.
|
|
Additional information:
|
|
The value of this counter changes
|
|
each time the MASS-STORAGE-RESOURCE-CHANGED object
|
|
is set to eTrue. The value also changes when the
|
|
mass storage device is initialized. However, the value does not
|
|
change when a mass storage device is removed and a different
|
|
mass storage device is installed. Initializing all volumes sets
|
|
this object back to the factory default value. A reboot sets
|
|
this object back to the factory devalut value.
|
|
Returns <noSuchName>
|
|
status if attempting to access this object and there
|
|
is no storage device is installed."
|
|
::= { mass-storage-resources 1 }
|
|
|
|
|
|
mass-storage-resource-changed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eTrue(2)
|
|
}
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Setting to eTrue causes MASS-STORAGE-RESOURCE-CHANGE-COUNTER to
|
|
be incremented.
|
|
Additional information:
|
|
Returns <noSuchName>
|
|
status if attempting to access this object and there
|
|
is no storage device is installed."
|
|
::= { mass-storage-resources 2 }
|
|
|
|
|
|
ram-disk-mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOff(1),
|
|
eAuto(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or controls RAM disk support. eOFF turns off the RAM
|
|
disk functionality. eOn turns on the RAM disk functionality and
|
|
creates a RAM disk whose size is controlled by the
|
|
RAM-DISK-SIZE object. eAuto turns on the RAM disk functionality
|
|
and creates a RAM disk size determined by the printer based on
|
|
installed options and other memory related settings.
|
|
Additional information:
|
|
Returns or controls RAM disk support. eOFF turns off
|
|
the RAM disk functionality. eAuto turns on
|
|
the RAM disk functionality and creates a RAM disk size
|
|
determined by the printer based on the amount of installed
|
|
memory."
|
|
::= { settings-mass-storage-bd 1 }
|
|
|
|
|
|
ram-disk-size OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or controls the size of the RAM disk. The device POS
|
|
specifies the minimum memory requirements. The object
|
|
MAXIMUM-RAM-DISK-MEMORY specifies the maximum memory available
|
|
for the RAM disk.
|
|
Additional information:
|
|
Returns the size of the RAM disk."
|
|
::= { settings-mass-storage-bd 2 }
|
|
|
|
|
|
maximum-ram-disk-memory OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object's name is misleading. This object does not return
|
|
the maximum configurable RAM disk size. Instead, it returns the
|
|
maximum amount of memory, in bytes, that can used to increase
|
|
the size of the RAM disk.
|
|
Additional information:
|
|
This object returns the maximum amount of additional
|
|
memory that is available for increasing the size of the RAM
|
|
disk."
|
|
::= { status-mass-storage-bd 1 }
|
|
|
|
|
|
mono-color-switching-mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eAutoSwitch(1),
|
|
eOptimizeForSpeed(4),
|
|
eOptimizeForYield(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object allows the user to view/change the color/mono
|
|
switching mode for a device.
|
|
Additional information:
|
|
This object allows the user to change between three color
|
|
mono switching modes. Automatic, optimize for speed and optimized
|
|
for cost per page. The behaivor of these settings depend on the
|
|
product being used, and is optimized based on the expected use of
|
|
the product."
|
|
::= { settings-system 31 }
|
|
|
|
|
|
job-input-auto-continue-timeout OBJECT-TYPE
|
|
SYNTAX INTEGER(-1..3600)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of seconds the device waits after a job related
|
|
continuable error occurs before automatically continuing. An
|
|
example job related continuable error is the job requesting a
|
|
media size that is not available. After the timeout expires,
|
|
the device will continue processing the job as if a continue
|
|
event occurred, such as the front panel continue key being
|
|
pressed. If the value is -1, the device does not automatically
|
|
continue after a job related continuable error occurs. If the
|
|
value is 0, the device immediately continues. If the value is
|
|
greater than 0, the value represents the timeout value in
|
|
seconds.
|
|
Additional information:
|
|
This object is used only for media requests
|
|
(size and/or name). LaserJet 8150 supports any value in
|
|
the range of -1 to 3600. Setting to a value outside
|
|
of that range causes the printer to substitute a
|
|
value (listed below) and to return
|
|
<noError> status. The
|
|
values are as follow: <-1 snaps to -1
|
|
>3600 snaps to 3600 (60 minutes) The action that
|
|
occurs when this timeout expires is explained by
|
|
JOB-INPUT-AUTO-CONTINUE-MODE. It is not the same as
|
|
the CONTINUE object being set to eInitiateAction or
|
|
the Select key being pressed on the control panel.
|
|
See the CONTINUE object description for
|
|
information on the actions that occur for those
|
|
conditions.
|
|
The data for this object is stored in NVRAM."
|
|
::= { status-system 35 }
|
|
|
|
|
|
job-input-auto-continue-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when the desired media is
|
|
not currently available.
|
|
cCancelJob - The device cancels the job. The device POS
|
|
should explain what happens if this item is not the
|
|
only item in the collection.
|
|
cAutoMediaSizeOverride - The device is allowed to
|
|
substitute a different size media.
|
|
cAutoMediaNameOverride - The device is allowed to
|
|
substitute a different media name.
|
|
cUSMediaSizeOverride - The device is allowed to substitute
|
|
US media sizes (letter, etc.) for ISO media sizes (A4,
|
|
etc.).
|
|
cISOMediaSizeOverride - The device is allowed to substitute
|
|
ISO media sizes (A4, etc.) for US media sizes (letter,
|
|
etc.).
|
|
Additional information:
|
|
If cCancelJob is set, the current print job will
|
|
be canceled regardless of other item settings. At
|
|
least one bit of the collection must be set; setting
|
|
this object to zero will cause a status of
|
|
<badValue> to be returned.
|
|
This object applies to all media requests, including
|
|
Manual Feed Requests. This object describes the
|
|
action that is performed when the
|
|
JOB-INPUT-AUTO-CONTINUE-TIMEOUT expires. The action
|
|
performed by the CONTINUE object being set to
|
|
eInitiateAction or the GO key being pressed on the
|
|
control panel may cause different actions. See the
|
|
CONTINUE object description for information on the
|
|
actions that occur for those conditions.
|
|
The data for this object is stored in NVRAM."
|
|
::= { status-system 36 }
|
|
|
|
|
|
job-output-auto-continue-timeout OBJECT-TYPE
|
|
SYNTAX INTEGER(-1..3600)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the time that the printer will wait after an
|
|
output bin becomes full and the printer is trying to deliver a
|
|
sheet of media to that output bin. When the timeout expires,
|
|
the job is processed according to the OUTBINn-OVERRIDE-MODE. A
|
|
value of -1 indicates that the printer will wait for a continue
|
|
event. A non-negative value is the number of seconds to wait.
|
|
Additional information:
|
|
A value of zero means to continue immediately.
|
|
The value of this object is stored in NVRAM, so
|
|
it is maintained across a power cycle.
|
|
The data for this object is stored in NVRAM."
|
|
::= { status-system 40 }
|
|
|
|
|
|
model-number OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Identifies the device model number as listed in the HP
|
|
corporate price list (e.g. C2121A for DeskJet 500C). The string
|
|
is as specific as possible. Products should note in POS if the
|
|
model number on the CPL changes but the device reports the
|
|
previous model number. If the model number changes based on the
|
|
installed options, the POS should indicate if only the base
|
|
model number is returned, or if the device senses the installed
|
|
options and returns the correct model number. If possible,
|
|
encode the model number in a symbol set (like Roman-8) that
|
|
matches the ASCII character set and limit the characters used
|
|
to ASCII characters.
|
|
Additional information:
|
|
The value of this object does not change based on
|
|
the installed options. The default of this object is the
|
|
same on all LaserJet 8150 printers."
|
|
::= { id 1 }
|
|
|
|
|
|
model-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Identifies the device model name (e.g. ''DeskJet 1200C''). The
|
|
string is as specific as possible. Capitalization and spacing
|
|
should match family naming conventions. Products should note in
|
|
POS if the model name on the HP corporate price list changes
|
|
but the device reports the previous device name. If the model
|
|
name changes based on the installed options, the POS should
|
|
indicate if only the base model name is returned, or if the
|
|
device senses the installed options and returns the correct
|
|
model name. If possible, encode the model name in a symbol set
|
|
(like Roman-8) that matches the ASCII character set and limit
|
|
the characters used to ASCII characters.
|
|
Additional information:
|
|
Since the value of this object is frequently used in
|
|
displaying a list of printers, it is kept relatively short in
|
|
case systems have limited width for their display area. The
|
|
model name does not change based on sensing of installed options."
|
|
::= { id 2 }
|
|
|
|
|
|
phd2-model OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns product information identifying PHD device 2. Example:
|
|
XXXX.
|
|
Additional information:
|
|
If at least one (1) external paper handling device
|
|
is attached to the printer, then this object will
|
|
exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER
|
|
should be returned.
|
|
This object returns product information about the
|
|
first paper handling device in the device chain."
|
|
::= { phd2 1 }
|
|
|
|
|
|
phd2-manufacturing-info OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns information describing the manufacture of PHD 2. May
|
|
include serial number and firmware revision.
|
|
Additional information:
|
|
If at least one (1) external paper handling device
|
|
is attached to the printer, then this object will
|
|
exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER
|
|
should be returned.
|
|
This object returns the name of the manufacturer of
|
|
the first paper handling device."
|
|
::= { phd2 2 }
|
|
|
|
|
|
phd2-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUnknown(2),
|
|
eInputPHD(10),
|
|
eOutputPHD(11),
|
|
eBindingPHD(13)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in PHD
|
|
interface 2. See SIMM1-TYPE for an explanation of the
|
|
enumerations.
|
|
Additional information:
|
|
If at least one (1) external paper handling device
|
|
is attached to the printer, then this object will
|
|
exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER
|
|
should be returned.
|
|
This object returns whether the device is an input
|
|
device, an output device, or an unknown device which may
|
|
be developed in the future."
|
|
::= { phd2 3 }
|
|
|
|
|
|
phd2-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of the installed option.
|
|
See SIMM1-CAPACITY for an explanation of the meaning of the
|
|
value of this object.
|
|
Additional information:
|
|
If at least one (1) external paper handling device
|
|
(EPHD) is attached to the printer, then this object
|
|
will exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER
|
|
should be returned.
|
|
This object returns the number of input trays or
|
|
output bins, depending the the device type (see
|
|
PHD2-TYPE) for the first EPHD in the device chain."
|
|
::= { phd2 4 }
|
|
|
|
|
|
phd3-model OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns product information identifying PHD device 3. Example:
|
|
XXXX.
|
|
Additional information:
|
|
If at least one (1) external paper handling device
|
|
is attached to the printer, then this object will
|
|
exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER
|
|
should be returned.
|
|
This object returns product information about the
|
|
second paper handling device in the device chain."
|
|
::= { phd3 1 }
|
|
|
|
|
|
phd3-manufacturing-info OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns information describing the manufacture of PHD 3. May
|
|
include serial number and firmware revision.
|
|
Additional information:
|
|
If at least one (1) external paper handling device
|
|
is attached to the printer, then this object will
|
|
exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER
|
|
should be returned.
|
|
This object returns the name of the manufacturer of
|
|
the first paper handling device."
|
|
::= { phd3 2 }
|
|
|
|
|
|
phd3-type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUnknown(2),
|
|
eInputPHD(10),
|
|
eOutputPHD(11),
|
|
eBindingPHD(13)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the type of option installed in PHD
|
|
interface 3. See SIMM1-TYPE for an explanation of the
|
|
enumerations.
|
|
Additional information:
|
|
If at least one (1) external paper handling device
|
|
is attached to the printer, then this object will
|
|
exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER
|
|
should be returned.
|
|
This object returns whether the device is an input
|
|
device, an output device, or an unknown device which may
|
|
be developed in the future."
|
|
::= { phd3 3 }
|
|
|
|
|
|
phd3-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns an indication of the capacity of the installed option.
|
|
See SIMM1-CAPACITY for an explanation of the meaning of the
|
|
value of this object.
|
|
Additional information:
|
|
If at least one (1) external paper handling device
|
|
(EPHD) is attached to the printer, then this object
|
|
will exist, otherwise ERROR-UNKNOWN-OBJECT-IDENTIFIER
|
|
should be returned.
|
|
This object returns the number of input trays or
|
|
output bins, depending the the device type (see
|
|
PHD2-TYPE) for the first EPHD in the device chain."
|
|
::= { phd3 4 }
|
|
|
|
|
|
engine-self-diagnostic OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The ENGINE-SELF-DIAGNOSTIC object reveals current engine
|
|
failures; it returns a binary string of two-byte motor, clutch,
|
|
solenoid, and sensor failure codes.
|
|
Additional information:
|
|
The ENGINE-SELF-DIAGNOSTIC object reveals current
|
|
Engine Failures; it returns a BINARY string of two-byte
|
|
Motor, Clutch, Solenoid and Sensor failure codes."
|
|
::= { test 7 }
|
|
|
|
|
|
engine-parameter OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The ENGINE-PARAMETER object returns a device specific set of
|
|
engine parameters as a binary string of byte values. It will be
|
|
necessary to have a decoder for each engine to interpret the
|
|
data.
|
|
Additional information:
|
|
The ENGINE-PARAMETER object returns a device specific
|
|
set of engine parameters as a BINARY string of byte
|
|
values. It will be necessary to have a decoder for each
|
|
engine to interpret the data."
|
|
::= { test 8 }
|
|
|
|
|
|
default-media-name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the media name that is used until the media
|
|
name is changed by a print job command.
|
|
Additional information:
|
|
This string must be one of the MEDIAn-NAME
|
|
objects. The value of this object is saved across
|
|
a power cycle."
|
|
::= { settings-pdl 22 }
|
|
|
|
|
|
override-media-name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Sets a string identifying the media name that is to be used in
|
|
place of the currently requested media. The substitution will
|
|
continue until another media is selected. If set to a named
|
|
media that is not currently available the requested media is
|
|
not overridden.
|
|
Additional information:
|
|
When a request is received to print on a size and
|
|
type of media that is not currently available, this
|
|
object contains the desired media name as set by the
|
|
print job. This object should be set to a media name
|
|
that is currently available in the printer. If a
|
|
paper mount request is not pending, attempting to get
|
|
or set this object will cause
|
|
<noSuchName> to be returned.
|
|
Setting this object to a string other than one of the
|
|
MEDIAn-NAME objects (MEDIA-NAMES-AVAILABLE is applied)
|
|
will cause a status of <badValue>
|
|
to be returned."
|
|
::= { settings-prt-eng 2 }
|
|
|
|
|
|
override-media-size OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUSExecutive(1),
|
|
eUSLetter(2),
|
|
eUSLegal(3),
|
|
eLedger(11),
|
|
eROC16K(17),
|
|
eJISExecutive(18),
|
|
eROC8K(19),
|
|
eISOandJISA5(25),
|
|
eISOandJISA4(26),
|
|
eISOandJISA3(27),
|
|
eJISB5(45),
|
|
eJISB4(46),
|
|
eISOB5(65),
|
|
eJapanesePostcardDouble(72),
|
|
eMonarch(80),
|
|
eCommercial10(81),
|
|
eInternationalDL(90),
|
|
eInternationalC5(91),
|
|
eInternationalB5(100),
|
|
eCustom(101),
|
|
eUSLetterR(258),
|
|
eISOandJISA4R(282),
|
|
eUnknownMediaSize(32767)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Sets the media size that is to be used in place of the
|
|
currently requested media size.
|
|
Additional information:
|
|
When a request is received to print on a size and
|
|
type of media that is not currently available, this object contains the
|
|
desired size as set by the print job. This object should be set to a media
|
|
size that is currently available to the printer.
|
|
If a paper mount request is not pending, attempting to get or set this object
|
|
will cause <noSuchName> to be returned."
|
|
::= { settings-prt-eng 3 }
|
|
|
|
|
|
marking-agent-density-setting OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the marking agent density setting for each of
|
|
the marking agents installed. The Marking Agent (aka Print)
|
|
density is the instantaneous amount of marking agent applied to
|
|
the media while printing. A value of zero has the lowest print
|
|
density, yielding a lighter page. A value of 10 has the highest
|
|
print density, yielding a darker page. The device POS will
|
|
document what values are supported.
|
|
Additional information:
|
|
See the description for PRINT-DENSITY ."
|
|
::= { marking-agent-density 1 }
|
|
|
|
|
|
total-color-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of color pages printed by the device.
|
|
Additional information:
|
|
Any page with one or more color pixels is counted as a color page. Pages that only
|
|
contain black marks are not counted by this object.
|
|
The valid range of this object is 0 to 2^24-1. When the number of color pages printed exceeds the maximum
|
|
color page count, the value will roll to zero. (Realistically, this should never happen since that value is mo
|
|
re
|
|
than 16 times the rated life of the engine.)
|
|
A duplexed sheet of media will cause the counter to be incremented by two."
|
|
::= { status-prt-eng 7 }
|
|
|
|
|
|
duplex-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of sheets of media that have been duplex printed.
|
|
A sheet is counted if it travels through the duplex page path,
|
|
regardless of whether or not marks are made on the page. The
|
|
POS will indicate if the value is kept in NVRAM.
|
|
Additional information:
|
|
In LaserJet 8150 the count is kept in
|
|
NVRAM however the NVRAM value is only updated every 10
|
|
sheets. NOTE: The value returned by this object will be
|
|
incremented every sheet but if power is lost between
|
|
NVRAM updates up to 9 sheets of the count may be
|
|
lost. The counter will be reset to zero
|
|
after 16,777,215 (2^24-1) pages. "
|
|
::= { status-prt-eng 22 }
|
|
|
|
|
|
print-engine-revision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..16))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Print engine revision string.
|
|
Additional information:
|
|
The symbol set for this string is Roman-8. Converts
|
|
engine revision number to a string and returns it."
|
|
::= { status-prt-eng 26 }
|
|
|
|
|
|
printer-cal-dhalf-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the page count when the last DHALF calibration
|
|
occurred. A '-1' indicates that a calibration of this kind has
|
|
not taken place yet. This object exists (and is meaningful)
|
|
only in color printers.
|
|
Additional information:
|
|
Provides the page count when last DHALF calibration
|
|
occurred. A -1 indicates that a calibration of this
|
|
kind has not taken place yet. This object exists
|
|
(and is meaningful) only in color printers."
|
|
::= { printer-calibration-dhalf 1 }
|
|
|
|
|
|
printer-cal-dhalf-utc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the time (in UTC - Universal Time Code format) when
|
|
the last DHALF calibration occurred. This value could be zero
|
|
if no calibration has taken place or if the printer lacked
|
|
real-time. This object exists (and is meaningful) only in color
|
|
printers.
|
|
Additional information:
|
|
Provides the time (in UTC - Universal Time Code format)
|
|
when last DHALF calibration occurred. This value could
|
|
be zero if no calibration has taken place and / or if
|
|
the printer lacked real-time. This object exists (and
|
|
is meaningful) only in color printers."
|
|
::= { printer-calibration-dhalf 2 }
|
|
|
|
|
|
printer-cal-cpr-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the page count when last CPR calibration occurred. A
|
|
'-1' indicates that a calibration of this kind has not taken
|
|
place yet. This object exists (and is meaningful) only in color
|
|
printers.
|
|
Additional information:
|
|
Provides the page count when last CPR calibration
|
|
occurred. A -1 indicates that a calibration of this
|
|
kind has not taken place yet. This object exists
|
|
(and is meaningful) only in color printers."
|
|
::= { printer-calibration-cpr 1 }
|
|
|
|
|
|
printer-cal-cpr-utc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the time (in UTC - Universal Time Code format) when
|
|
the last CPR calibration occurred. This value could be zero if
|
|
no calibration has taken place or if the printer lacked
|
|
real-time. This object exists (and is meaningful) only in color
|
|
printers.
|
|
Additional information:
|
|
Provides the time (in UTC - Universal Time Code format)
|
|
when last CPR calibration occurred. This value could
|
|
be zero if no calibration has taken place and / or if
|
|
the printer lacked real-time. This object exists (and
|
|
is meaningful) only in color printers."
|
|
::= { printer-calibration-cpr 2 }
|
|
|
|
|
|
input-tray-auto-select OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOff(1),
|
|
eOn(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Indicates if the device will automatically try to load media
|
|
from the next input media tray in the auto-select sequence
|
|
(defined by each device) when it cannot load media from the
|
|
current tray. Locked trays will not be permitted in the
|
|
auto-select sequence. This object has no meaning if there is
|
|
only one unlocked input media tray.
|
|
Additional information:
|
|
Indicates whether, when the requested input tray does
|
|
not contain suitable media, the printer will try to
|
|
auto-select another input tray that has usable media
|
|
loaded. If this object is set to eOff(1), then the
|
|
printer will not try to auto-select another tray and
|
|
will simply prompt the user to load the requested tray
|
|
with the requested media. If the object is set to eOn(2),
|
|
then auto-selection will be used to try to find another
|
|
suitable input tray."
|
|
::= { settings-intray 2 }
|
|
|
|
|
|
default-custom-paper-dim-unit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eTenThousandthsOfInches(3),
|
|
eMicrometers(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The units of measure used to specify the width and height of
|
|
the printer's default custom paper size. The unit of measure of
|
|
eTenThousandthsOfInches is 0.0001 inches.
|
|
Additional information:
|
|
The units of measure used to specify the width and
|
|
height of the printer's default custom paper size.
|
|
The unit of measure of eTenThousandthsOfInches is
|
|
0.0001 inches."
|
|
::= { settings-intray 10 }
|
|
|
|
|
|
default-custom-paper-feed-dim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Sets the printer's default custom paper size dimension in the
|
|
feed direction (direction parallel to the direction of paper
|
|
feeding). The value for this object is specified in micrometers
|
|
or tenthousandths of an inch, depending upon the value of
|
|
DEFAULT-CUSTOM-PAPER-DIM-UNIT. The valid range is
|
|
engine-dependent and should be documented in the POS for each
|
|
product.
|
|
Additional information:
|
|
Sets the printer's default custom paper size dimension
|
|
in the feed direction (direction parallel to the direction
|
|
of paper feeding). The value for this object is specified
|
|
in micrometers or tenthousandths of an inch, depending upon
|
|
the value of DEFAULT-CUSTOM-PAPER-DIM-UNIT. The valid
|
|
range is engine-dependent and should be documented in the
|
|
POS for each product."
|
|
::= { settings-intray 11 }
|
|
|
|
|
|
default-custom-paper-xfeed-dim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Sets the printer's default custom paper size dimension in the
|
|
cross-feed direction (direction ninety degrees relative to the
|
|
direction of paper feeding). The value for this object is
|
|
specified in micrometers or tenthousandths of an inch,
|
|
depending upon the value of DEFAULT-CUSTOM-PAPER-DIM-UNIT. The
|
|
valid range is engine-dependent and should be documented in the
|
|
POS for each product.
|
|
Additional information:
|
|
Sets the printer's default custom paper size dimension
|
|
in the cross-feed direction (direction ninety degrees
|
|
relative to the direction of paper feeding). The value
|
|
for this object is specified in micrometers or
|
|
tenthousandths of an inch, depending upon the value of
|
|
DEFAULT-CUSTOM-PAPER-DIM-UNIT. The valid range is
|
|
engine-dependent and should be documented in the POS
|
|
for each product."
|
|
::= { settings-intray 12 }
|
|
|
|
|
|
input-tray-max-media-feed-dim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum physical media size in the feed direction of this
|
|
input device expressed in units of measure specified by INPUT-
|
|
TRAY-MIN-MAX-DIM-UNIT. A value of (-1) implies 'unlimited', a
|
|
value of (-2) implies 'unknown'.
|
|
Additional information:
|
|
The maximum physical media size in the feed direction of this
|
|
input device expressed in units of measure specified by
|
|
PrtInputDimUnit. A value of (-1) implies 'unlimited',
|
|
a value of (-2) implies 'unknown'.
|
|
Refer to Printer Management Standards web page,
|
|
http://bldlabs.boi.hp.com/BLDPrinterLab/Project/PrinterManagement, for more details in the original format
|
|
of the Standard Printer MIB."
|
|
::= { settings-intray 14 }
|
|
|
|
|
|
input-tray-max-media-xfeed-dim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum physical media size across the feed direction of a
|
|
particular input device expressed in units of measure specified
|
|
by INPUT-TRAY-MIN-MAX-DIM-UNIT. A value of (-1) implies
|
|
'unlimited', a value of (-2) implies 'unknown'.
|
|
Additional information:
|
|
The maximum physical media size across the feed direction of this
|
|
input device expressed in units of measure specified by
|
|
PrtInputDimUnit. A value of (-1) implies 'unlimited',
|
|
a value of (-2) implies 'unknown'.
|
|
Refer to Printer Management Standards web page,
|
|
http://bldlabs.boi.hp.com/BLDPrinterLab/Project/PrinterManagement, f
|
|
or more details in the original format
|
|
of the Standard Printer MIB."
|
|
::= { settings-intray 15 }
|
|
|
|
|
|
input-tray-min-media-feed-dim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The minimum physical media size in the feed direction of a
|
|
particular input device expressed in units of measure specified
|
|
by PrtInputMinMaxDimUnit. A value of (-1) implies 'unlimited',
|
|
a value of (-2) implies 'unknown'.
|
|
Additional information:
|
|
The minimum physical media size in the feed direction of this
|
|
input device expressed in units of measure specified by
|
|
PrtInputDimUnit. A value of (-1) implies 'unlimited',
|
|
a value of (-2) implies 'unknown'.
|
|
Refer to Printer Management Standards web page,
|
|
http://bldlabs.boi.hp.com/BLDPrinterLab/Project/PrinterManagement,
|
|
for more details in the original format
|
|
of the Standard Printer MIB."
|
|
::= { settings-intray 16 }
|
|
|
|
|
|
input-tray-min-media-xfeed-dim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The minimum physical media size across the feed direction of a
|
|
particular input device expressed in units of measure specified
|
|
by PrtInputMinMaxDimUnit. A value of (-1) implies 'unlimited',
|
|
a value of (-2) implies 'unknown'.
|
|
Additional information:
|
|
The minimum physical media size across the feed direction of this
|
|
input device expressed in units of measure specified by
|
|
PrtInputDimUnit. A value of (-1) implies 'unlimited',
|
|
a value of (-2) implies 'unknown'.
|
|
Refer to Printer Management Standards web page,
|
|
http://bldlabs.boi.hp.com/BLDPrinterLab/Project/PrinterManagement,
|
|
for more details in the original format
|
|
of the Standard Printer MIB."
|
|
::= { settings-intray 17 }
|
|
|
|
|
|
|
|
|
|
tray1-media-size-loaded OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUSExecutive(1),
|
|
eUSLetter(2),
|
|
eUSLegal(3),
|
|
eFoolscap(10),
|
|
eLedger(11),
|
|
eROC16K(17),
|
|
eJISExecutive(18),
|
|
eROC8K(19),
|
|
eISOandJISA5(25),
|
|
eISOandJISA4(26),
|
|
eISOandJISA3(27),
|
|
eJISB5(45),
|
|
eJISB4(46),
|
|
eISOB5(65),
|
|
eJapanesePostcardDouble(72),
|
|
eMonarch(80),
|
|
eCommercial10(81),
|
|
eInternationalDL(90),
|
|
eInternationalC5(91),
|
|
eInternationalB5(100),
|
|
eCustom(101),
|
|
eUSLetterR(258),
|
|
eISOandJISA4R(282),
|
|
eAnyCustomSize(32764),
|
|
eAnySize(32765)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the media size that is currently configuredconfigured
|
|
in tray #1. This object can be set to indicate the media size
|
|
currently loaded, if the printer supports input trays that can
|
|
not sense the media size. Complete list of supported media
|
|
sizes along with their dimensions are listed in the ''Media
|
|
Size Table'' near the end of this document."
|
|
::= { intray1 1 }
|
|
|
|
|
|
tray1-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that contains
|
|
this input tray.
|
|
Additional information:
|
|
The internal trays belong to device 0, which is the
|
|
base engine. The envelope feeder (if supported) is
|
|
considered to be device 1 and the external input devices
|
|
can number between 2 and 6 depending on individual
|
|
user configurations."
|
|
::= { intray1 12 }
|
|
|
|
|
|
tray2-media-size-loaded OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUSExecutive(1),
|
|
eUSLetter(2),
|
|
eUSLegal(3),
|
|
eLedger(11),
|
|
eFoolscap(10),
|
|
eROC16K(17),
|
|
eJISExecutive(18),
|
|
eROC8K(19),
|
|
eISOandJISA5(25),
|
|
eISOandJISA4(26),
|
|
eISOandJISA3(27),
|
|
eJISB5(45),
|
|
eJISB4(46),
|
|
eISOB5(65),
|
|
eCustom(101),
|
|
eUSLetterR(258),
|
|
eISOandJISA4R(282),
|
|
eAnyCustomSize(32764),
|
|
eAnySize(32765)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the media size that is currently configured in tray #2.
|
|
Complete list of supported media sizes along with their
|
|
dimensions are listed in the ''Media Size Table'' near the end
|
|
of this document.
|
|
Additional information:
|
|
If the tray drawer is open, a get on this object
|
|
will cause a status of
|
|
<genErr> to be
|
|
returned. If the tray is empty, the size that the
|
|
tray is configured for will be returned. If Tray 2
|
|
is a 500-sheet standard tray, eJISB5 and eUSExecutive
|
|
are not valid values."
|
|
::= { intray2 1 }
|
|
|
|
|
|
tray2-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that contains
|
|
this input tray."
|
|
::= { intray2 12 }
|
|
|
|
|
|
tray3-media-size-loaded OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUSExecutive(1),
|
|
eUSLetter(2),
|
|
eUSLegal(3),
|
|
eFoolscap(10),
|
|
eLedger(11),
|
|
eROC16K(17),
|
|
eJISExecutive(18),
|
|
eROC8K(19),
|
|
eISOandJISA5(25),
|
|
eISOandJISA4(26),
|
|
eISOandJISA3(27),
|
|
eJISB5(45),
|
|
eJISB4(46),
|
|
eISOB5(65),
|
|
eCustom(101),
|
|
eUSLetterR(258),
|
|
eISOandJISA4R(282),
|
|
eAnyCustomSize(32764),
|
|
eAnySize(32765)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the media size that is currently configured in tray #3.
|
|
Complete list of supported media sizes along with their
|
|
dimensions are listed in the ''Media Size Table'' near the end
|
|
of this document.
|
|
Additional information:
|
|
If the tray drawer is open, a get on this object
|
|
will cause a status of
|
|
<genErr> to be
|
|
returned. If the tray is empty, the size that the
|
|
tray is configured for will be returned."
|
|
::= { intray3 1 }
|
|
|
|
|
|
tray3-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that contains
|
|
this input tray."
|
|
::= { intray3 12 }
|
|
|
|
|
|
tray6-media-size-loaded OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eUSExecutive(1),
|
|
eUSLetter(2),
|
|
eUSLegal(3),
|
|
eFoolscap(10),
|
|
eLedger(11),
|
|
eROC16K(17),
|
|
eJISExecutive(18),
|
|
eROC8K(19),
|
|
eISOandJISA4(26),
|
|
eISOandJISA3(27),
|
|
eJISB4(46),
|
|
eCustom(101),
|
|
eUSLetterR(258),
|
|
eISOandJISA4R(282)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the media size that is currently configured in tray #5.
|
|
Complete list of supported media sizes along with their
|
|
dimensions are listed in the ''Media Size Table'' near the end
|
|
of this document.
|
|
Additional information:
|
|
If the tray drawer is open, a get on this object
|
|
will cause a status of
|
|
<genErr> to be
|
|
returned. If the tray is empty, the size that the
|
|
tray is configured for will be returned."
|
|
::= { intray6 1 }
|
|
|
|
|
|
tray6-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that contains
|
|
this input tray."
|
|
::= { intray6 12 }
|
|
|
|
|
|
overflow-bin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the bin that will be used for additional sheets
|
|
of media when the current bin is full and printing is allowed
|
|
to continue.
|
|
Additional information:
|
|
The data for this object is stored in NVRAM."
|
|
::= { settings-outbin 4 }
|
|
|
|
|
|
outbin1-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent media to
|
|
the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the attention
|
|
condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the binder
|
|
attention condition and continues printing.
|
|
Additional information:
|
|
If cCancelJob is set, the current print job will
|
|
be cancelled regardless of other item settings.
|
|
If cOutbinFullOverride is set and this bin is the
|
|
designated overflow bin (OVERFLOW-BIN = 1), then the
|
|
bit is ignored. This object describes the action
|
|
that is performed when the
|
|
JOB-OUTPUT-AUTO-CONTINUE-TIMEOUT expires. If no bits
|
|
are set, no override action is taken (the printer
|
|
will continue to wait).
|
|
The action performed by the CONTINUE object being set
|
|
to eInitiateAction or the GO key being pressed on the
|
|
control panel may cause different actions. See the
|
|
CONTINUE object description for information on the
|
|
actions that occur for those conditions."
|
|
::= { outbin1 9 }
|
|
|
|
|
|
outbin3-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent media to
|
|
the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the attention
|
|
condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the binder
|
|
attention condition and continues printing.
|
|
Additional information:
|
|
If cCancelJob is set, the current print job will
|
|
be cancelled regardless of other item settings.
|
|
If cOutbinFullOverride is set and this bin is the
|
|
designated overflow bin (OVERFLOW-BIN = 1), then the
|
|
bit is ignored. This object describes the action
|
|
that is performed when the
|
|
JOB-OUTPUT-AUTO-CONTINUE-TIMEOUT expires. If no bits
|
|
are set, no override action is taken (the printer
|
|
will continue to wait).
|
|
The action performed by the CONTINUE object being set
|
|
to eInitiateAction or the GO key being pressed on the
|
|
control panel may cause different actions. See the
|
|
the CONTINUE object description for information on the
|
|
actions that occur for those conditions."
|
|
::= { outbin3 9 }
|
|
|
|
|
|
outbin3-maximum-binding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum number of sheets of 20 pound paper that can be
|
|
bound by the binding device that serves this output bin. If a
|
|
job exceeds this number and the job has requested binding,
|
|
cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE.
|
|
Additional information:
|
|
The maximum number of sheets of 20 pound paper that can
|
|
be bound by the binding device that serves this output
|
|
bin. If a job exceeds this number and the job has
|
|
requested binding, cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE."
|
|
::= { outbin3 10 }
|
|
|
|
|
|
outbin3-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that contains
|
|
this output bin.
|
|
Additional information:
|
|
Provides the number of the Paper Handling Device that
|
|
contains this output bin."
|
|
::= { outbin3 11 }
|
|
|
|
|
|
outbin3-error-info OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A device specific description of the last error encountered for
|
|
output bin 3. Each POS should document the meaning of all
|
|
supported error information.
|
|
Additional information:
|
|
This is a description of the current error state of a
|
|
finishing device. (ie stapler). If the bin does not
|
|
support any finishing capabilities then the object
|
|
will return <badValue>.
|
|
The possible return values are as follows:
|
|
Byte1, Byte2, and Byte3 should be 0x00. as they are
|
|
reserved for future use.
|
|
Byte4 is a bit field that can be interpreted as
|
|
follows:
|
|
bit 0 -- unused
|
|
bit 1 -- eBinderOut Out of staples
|
|
bit 2 -- eBinderLimit Too many pages to finish
|
|
bit 3 -- eBinderJam Staple jammed in stapler
|
|
bit 4 -- eBinderAlign Pages aren't aligned correctly
|
|
to finish.
|
|
bit 5 -- unused
|
|
bit 6 -- unused
|
|
bit 7 -- unused
|
|
|
|
NOTE: Because HP is marketing a device with a max of
|
|
16 bins the OUTBIN-MAXIMUM-BINDING objects are 3-18 but
|
|
the external device specification requires support of
|
|
up to 315 output bins. Therefore if these bins exist
|
|
above 16, then the coresponding objects will also exist
|
|
OUTBIN19-MAXIMUM-BINDING ... OUTBIN317-MAXIMUM-BINDING"
|
|
::= { outbin3 12 }
|
|
|
|
|
|
outbin4-override-mode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the device behavior when this output bin
|
|
condition causes printing to stop.
|
|
cCancelJob - The device cancels the job.
|
|
cOutbinFullOverride - The device sends subsequent media to
|
|
the overflow bin.
|
|
cOutbinAttentionOverride - The device ignores the attention
|
|
condition and continues printing.
|
|
cBinderAttentionOverride - The device ignores the binder
|
|
attention condition and continues printing.
|
|
Additional information:
|
|
If cCancelJob is set, the current print job will
|
|
be cancelled regardless of other item settings.
|
|
If cOutbinFullOverride is set and this bin is the
|
|
designated overflow bin (OVERFLOW-BIN = 1), then the
|
|
bit is ignored. This object describes the action
|
|
that is performed when the
|
|
JOB-OUTPUT-AUTO-CONTINUE-TIMEOUT expires. If no bits
|
|
are set, no override action is taken (the printer
|
|
will continue to wait).
|
|
The action performed by the CONTINUE object being set
|
|
to eInitiateAction or the GO key being pressed on the
|
|
control panel may cause different actions. See the
|
|
CONTINUE object description for information on the
|
|
actions that occur for those conditions.
|
|
Outbin 5-12 are supported but are not testable."
|
|
::= { outbin4 9 }
|
|
|
|
|
|
outbin4-maximum-binding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The maximum number of sheets of 20 pound paper that can be
|
|
bound by the binding device that serves this output bin. If a
|
|
job exceeds this number and the job has requested binding,
|
|
cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE.
|
|
Additional information:
|
|
The maximum number of sheets of 20 pound paper that can
|
|
be bound by the binding device that serves this output
|
|
bin. If a job exceeds this number and the job has
|
|
requested binding, cBindingError will be set in NOT-
|
|
READY-DESTINATION-PRINT-ENGINE. Outbin 5-12 are supported but
|
|
are not testable."
|
|
::= { outbin4 10 }
|
|
|
|
|
|
outbin4-phd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the number of the Paper Handling Device that contains
|
|
this output bin.
|
|
Additional information:
|
|
Provides the number of the Paper Handling Device that
|
|
contains this output bin."
|
|
::= { outbin4 11 }
|
|
|
|
|
|
outbin4-error-info OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A device specific description of the last error encountered for
|
|
output bin 4. Each POS should document the meaning of all
|
|
supported error information.
|
|
Additional information:
|
|
See OUTBIN3-ERROR-INFO DESCRIPTION"
|
|
::= { outbin4 12 }
|
|
|
|
|
|
marker-density-calibration OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eNotCalibrating(1),
|
|
eCalibrateALL(2),
|
|
eCalibrateColor(3),
|
|
eCalibrateHalftone(4),
|
|
eCalibrateColorPlaneRegistration(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns the calibration status or triggers a calibration cycle.
|
|
All calibration procedures are used if set to eCalibrateALL. If
|
|
set to eCalibrateDMAX then a full density engine calibration is
|
|
triggered. If set to eCalibrateDHALF, then a Halftone
|
|
calibration is triggered.
|
|
Additional information:
|
|
Returns the calibration status or triggers a calibration
|
|
cycle. All calibration procedures are used if set to
|
|
eCalibrateALL. If set to eCalibrateColor then a full
|
|
density engine calibration is triggered. If set to
|
|
eCalibrateHalftone, then a Halftone calibration is triggered.
|
|
If set to eCalibrateColorPlaneRegistration, then a Color
|
|
Plane Registration calibration is triggered. If set to
|
|
eCalibrateDrumPhaseAdjustment, then a Drum Phase Adjustment
|
|
calibration is triggered."
|
|
::= { settings-marking-agent 11 }
|
|
|
|
|
|
phd2-device-specific-command OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to send device-specific data to the paper
|
|
handling device. The meaning of the device-specific command is
|
|
dependent on the paper handling device and must be specified in
|
|
the POS. If the paper handling device does not accept the
|
|
command, then an <badValue> will be
|
|
returned. If the device accepts the command, it may still be
|
|
processing the command after the response has been returned.
|
|
Depending on the device, the application may need to query
|
|
PHDx-DEVICE-MEMORY to see when the command has completed.
|
|
Additional information:
|
|
This object is used to send device-specific data to the
|
|
paper handling device. The meaning of the device-
|
|
specific command is dependent on the paper handling
|
|
device and must be specified in the POS.
|
|
If the paper handling device does not accept the
|
|
command, then an <badValue> will
|
|
be returned. If the device accepts the command, it may
|
|
still be processing the command after the response has
|
|
been returned. Depending on the device, the application
|
|
may need to query PHDx-DEVICE-MEMORY to see when the
|
|
command has completed."
|
|
::= { ph2 2 }
|
|
|
|
|
|
phd3-device-specific-command OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS write-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to send device-specific data to the paper
|
|
handling device. The meaning of the device-specific command is
|
|
dependent on the paper handling device and must be specified in
|
|
the POS. If the paper handling device does not accept the
|
|
command, then an <badValue> will be
|
|
returned. If the device accepts the command, it may still be
|
|
processing the command after the response has been returned.
|
|
Depending on the device, the application may need to query
|
|
PHDx-DEVICE-MEMORY to see when the command has completed.
|
|
Additional information:
|
|
This object is used to send device-specific data to the
|
|
paper handling device. The meaning of the device-
|
|
specific command is dependent on the paper handling
|
|
device and must be specified in the POS.
|
|
If the paper handling device does not accept the
|
|
command, then an <badValue> will
|
|
be returned. If the device accepts the command, it may
|
|
still be processing the command after the response has
|
|
been returned. Depending on the device, the application
|
|
may need to query PHDx-DEVICE-MEMORY to see when the
|
|
command has completed."
|
|
::= { ph3 2 }
|
|
|
|
|
|
media-names-available OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The value of this object controls which of the MEDIAx-NAME
|
|
objects are supported. If a bit is set to zero, then attempting
|
|
to get or set the corresponding MEDIAx-NAME objects will return
|
|
<noSuchName>.
|
|
Additional information:
|
|
Setting a bit to one will cause the corresponding
|
|
MEDIAn- objects to be available (attempting to access
|
|
an unavailable object will return <noSuchName>).
|
|
MEDIA1- objects are always present, as this is the default
|
|
media. If this object is set to a value that does not include
|
|
cMediaName1Available, that bit will be set and a status of
|
|
<noError> will be returned.
|
|
cMediaName12Available, cMediaName13Available, and cMediaName14Available cannot
|
|
be changed, as MediaName12,13, and 14 are not supported Media Names for LaserJet 9500.
|
|
Attempts to set these will cause <badValue>
|
|
to be returned."
|
|
::= { settings-print-media 1 }
|
|
|
|
|
|
north-edge-offset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the number of 300 dpi dots by which the image
|
|
is shifted. Shift is relative to the leading edge of the medium
|
|
as the medium flows through the marking engine with the side to
|
|
be imaged facing the observer. The leading edge is the North
|
|
edge and the other edges are defined by the normal compass
|
|
layout of directions with the compass facing the observer. The
|
|
adjustment is for all pages printed. A positive value moves the
|
|
image away from the leading edge of the medium. A negative
|
|
value moves the image closer to the leading edge of the medium.
|
|
The value 0 will return the image to its factory default
|
|
position.
|
|
Additional information:
|
|
Returns or sets the number of 300 dpi dots by which the image is shifted.
|
|
Shift is relative to the leading edge of the medium as the medium flows through
|
|
the marking engine with the side to be imaged facing the observer. The leading
|
|
edge is the North edge and the other edges are defined by the normal compass layout
|
|
of directions with the compass facing the ob server. The adjustment is for all
|
|
pages printed. A positive value moves the image away from the leading edge of the
|
|
medium. A negative value moves the image closer to the leading edge of the medium.
|
|
The value 0 will return the image to its factory default position. The value of
|
|
this object is stored in NVRAM."
|
|
::= { settings-print-media 2 }
|
|
|
|
|
|
media1-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 1 name.
|
|
Additional information:
|
|
The symbol set for this string is Roman-8."
|
|
::= { media1 1 }
|
|
|
|
|
|
media1-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 1. The length
|
|
restriction is required to allow the media name to be displayed
|
|
on the device's control panel. The device POS must state the
|
|
maximum number of characters allowed. If the device also has a
|
|
limitation on what characters in a character set can be used
|
|
(e.g. only uppercase characters allowed), the POS should also
|
|
state character restrictions.
|
|
Additional information:
|
|
The maximum supported string length is 9 characters. If
|
|
the user entered string is too long, the device will store
|
|
the first 9 characters and will return the
|
|
<noError> status.
|
|
The characters must be in the range 20H to 7FH except 5C
|
|
cannot be used. The default symbol set is Roman-8 for
|
|
English; additional legal symbol sets are ISOLatin5,
|
|
ISOLatin2 and Windows31J. Setting this object with characters
|
|
outside of the range or of an illegal symbol set will cause an
|
|
error status of <badValue> to be returned."
|
|
::= { media1 2 }
|
|
|
|
|
|
media1-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 1 that have been printed. The device
|
|
POS should state whether this value is lost across a power
|
|
cycle or kept in NVRAM.
|
|
Additional information:
|
|
For LaserJet 8150 this page count is saved in NVRAM after every 10
|
|
pages. The maximum value is 4,294,967,295 which will never be reached in
|
|
normal operation.
|
|
The page count is incremented when a sheet of media is pulled from an input
|
|
tray. A duplex printed sheet will cause this counter to be incremented by
|
|
one.
|
|
The data for this object is stored in NVRAM."
|
|
::= { media1 3 }
|
|
|
|
|
|
media1-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
The engine processing characteristics that are to
|
|
be applied to this media type. Currently, 'engine
|
|
processing characteristics' denotes changes to
|
|
fusing temperature and/or transfer roller voltage.
|
|
The data for this object is stored in NVRAM."
|
|
::= { media1 4 }
|
|
|
|
|
|
media2-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 2 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media2 1 }
|
|
|
|
|
|
media2-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 2. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media2 2 }
|
|
|
|
|
|
media2-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 2 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media2 3 }
|
|
|
|
|
|
media2-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media2 4 }
|
|
|
|
|
|
media3-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 3 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media3 1 }
|
|
|
|
|
|
media3-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 3. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media3 2 }
|
|
|
|
|
|
media3-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 3 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media3 3 }
|
|
|
|
|
|
media3-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media3 4 }
|
|
|
|
|
|
media4-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 4 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media4 1 }
|
|
|
|
|
|
media4-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 4. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media4 2 }
|
|
|
|
|
|
media4-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 4 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media4 3 }
|
|
|
|
|
|
media4-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media4 4 }
|
|
|
|
|
|
media5-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 5 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media5 1 }
|
|
|
|
|
|
media5-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 5. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media5 2 }
|
|
|
|
|
|
media5-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 5 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media5 3 }
|
|
|
|
|
|
media5-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media5 4 }
|
|
|
|
|
|
media6-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 6 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media6 1 }
|
|
|
|
|
|
media6-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 6. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media6 2 }
|
|
|
|
|
|
media6-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 6 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media6 3 }
|
|
|
|
|
|
media6-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media6 4 }
|
|
|
|
|
|
media7-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 7 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media7 1 }
|
|
|
|
|
|
media7-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 7. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media7 2 }
|
|
|
|
|
|
media7-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 7 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media7 3 }
|
|
|
|
|
|
media7-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media7 4 }
|
|
|
|
|
|
media8-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 8 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media8 1 }
|
|
|
|
|
|
media8-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 8. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media8 2 }
|
|
|
|
|
|
media8-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 8 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media8 3 }
|
|
|
|
|
|
media8-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media8 4 }
|
|
|
|
|
|
media9-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 9 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media9 1 }
|
|
|
|
|
|
media9-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 9. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media9 2 }
|
|
|
|
|
|
media9-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 9 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media9 3 }
|
|
|
|
|
|
media9-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media9 4 }
|
|
|
|
|
|
media10-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 10 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media10 1 }
|
|
|
|
|
|
media10-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 10. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media10 2 }
|
|
|
|
|
|
media10-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 10 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media10 3 }
|
|
|
|
|
|
media10-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media10 4 }
|
|
|
|
|
|
media13-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 13 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media13 1 }
|
|
|
|
|
|
media13-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 13. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media13 2 }
|
|
|
|
|
|
media13-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 13 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media13 3 }
|
|
|
|
|
|
media13-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media13 4 }
|
|
|
|
|
|
media14-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 14 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media14 1 }
|
|
|
|
|
|
media14-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 14. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media14 2 }
|
|
|
|
|
|
media14-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 14 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media14 3 }
|
|
|
|
|
|
media14-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media14 4 }
|
|
|
|
|
|
media15-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 15 name.
|
|
Additional information:
|
|
The maximum supported string length is 24
|
|
bytes. If the user entered string is too long,
|
|
the device will store the first 24 bytes and
|
|
return the <noError> status.
|
|
See CAUTION statement under Product Specific Use."
|
|
::= { media15 1 }
|
|
|
|
|
|
media15-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 15. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
The maximum supported string length is 9 characters. If
|
|
the user entered string is too long, the device will store
|
|
the first 9 characters and will return the
|
|
<noError> status.
|
|
The characters must be in the range 20H to 7FH except 5C
|
|
cannot be used. The default symbol set is Roman-8 for
|
|
English; additional legal symbol sets are ISOLatin5,
|
|
ISOLatin2 and Windows31J. Setting this object with characters
|
|
outside of the range or of an illegal symbol set will cause an
|
|
error status of <badValue> to be returned."
|
|
::= { media15 2 }
|
|
|
|
|
|
media15-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 15 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media15 3 }
|
|
|
|
|
|
media15-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media15 4 }
|
|
|
|
|
|
media16-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 16 name.
|
|
Additional information:
|
|
See MEDIA15-NAME."
|
|
::= { media16 1 }
|
|
|
|
|
|
media16-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 16. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA15-SHORT-NAME."
|
|
::= { media16 2 }
|
|
|
|
|
|
media16-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 16 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA15-PAGE-COUNT."
|
|
::= { media16 3 }
|
|
|
|
|
|
media16-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media16 4 }
|
|
|
|
|
|
media17-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 17 name.
|
|
Additional information:
|
|
See MEDIA15-NAME."
|
|
::= { media17 1 }
|
|
|
|
|
|
media17-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 17. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA15-SHORT-NAME."
|
|
::= { media17 2 }
|
|
|
|
|
|
media17-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 17 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA15-PAGE-COUNT."
|
|
::= { media17 3 }
|
|
|
|
|
|
media17-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media17 4 }
|
|
|
|
|
|
media18-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 18 name.
|
|
Additional information:
|
|
See MEDIA15-NAME."
|
|
::= { media18 1 }
|
|
|
|
|
|
media18-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 18. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA15-SHORT-NAME."
|
|
::= { media18 2 }
|
|
|
|
|
|
media18-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 18 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA15-PAGE-COUNT."
|
|
::= { media18 3 }
|
|
|
|
|
|
media18-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media18 4 }
|
|
|
|
|
|
media19-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 19 name.
|
|
Additional information:
|
|
See MEDIA15-NAME."
|
|
::= { media19 1 }
|
|
|
|
|
|
media19-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 19. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA15-SHORT-NAME."
|
|
::= { media19 2 }
|
|
|
|
|
|
media19-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 19 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA15-PAGE-COUNT."
|
|
::= { media19 3 }
|
|
|
|
|
|
media19-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media19 4 }
|
|
|
|
|
|
media20-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 20 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media20 1 }
|
|
|
|
|
|
media20-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 20. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media20 2 }
|
|
|
|
|
|
media20-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 20 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media20 3 }
|
|
|
|
|
|
media20-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media20 4 }
|
|
|
|
|
|
media21-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 21 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media21 1 }
|
|
|
|
|
|
media21-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 21. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media21 2 }
|
|
|
|
|
|
media21-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 21 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media21 3 }
|
|
|
|
|
|
media21-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media21 4 }
|
|
|
|
|
|
media22-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 22 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media22 1 }
|
|
|
|
|
|
media22-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 22. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media22 2 }
|
|
|
|
|
|
media22-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 22 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media22 3 }
|
|
|
|
|
|
media22-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media22 4 }
|
|
|
|
|
|
media23-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 23 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media23 1 }
|
|
|
|
|
|
media23-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 23. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media23 2 }
|
|
|
|
|
|
media23-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 23 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media23 3 }
|
|
|
|
|
|
media23-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media23 4 }
|
|
|
|
|
|
media24-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 24 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media24 1 }
|
|
|
|
|
|
media24-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 24. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media24 2 }
|
|
|
|
|
|
media24-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 24 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media24 3 }
|
|
|
|
|
|
media24-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media24 4 }
|
|
|
|
|
|
media32-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Media 32 name.
|
|
Additional information:
|
|
See MEDIA1-NAME."
|
|
::= { media32 1 }
|
|
|
|
|
|
media32-short-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..9))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Length restricted version of the media name 32. See
|
|
MEDIA1-SHORT-NAME for details.
|
|
Additional information:
|
|
See MEDIA1-SHORT-NAME."
|
|
::= { media32 2 }
|
|
|
|
|
|
media32-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Number of sheets of media 32 that have been printed. See
|
|
MEDIA1-PAGE-COUNT for details.
|
|
Additional information:
|
|
See MEDIA1-PAGE-COUNT."
|
|
::= { media32 3 }
|
|
|
|
|
|
media32-engine-media-mode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The engine processing characteristics that are to be applied to
|
|
this media. The processing characteristics are device
|
|
specific.
|
|
Additional information:
|
|
See the description for MEDIA1-ENGINE-MEDIA-MODE."
|
|
::= { media32 4 }
|
|
|
|
|
|
engine-media-modes-supported1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The list of engine media modes supported by the device. The
|
|
modes are each separated by a comma character. An example
|
|
string would be: 'Normal,Rough,Low,Vellum'."
|
|
::= { media-modes 1 }
|
|
|
|
|
|
media-size-west-edge-first-side-offset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the number of 300 dpi dots by which the image
|
|
is shifted relative to the west edge of the medium (see
|
|
NORTH-EDGE-OFFSET). The adjustment is for the first printed
|
|
side of the medium only. A positive value moves the image away
|
|
from the west edge of the medium. A negative value moves the
|
|
image closer to the west edge of the medium. The value 0 will
|
|
return the image to its factory default position.
|
|
Additional information:
|
|
Returns or sets the number of 300 dpi dots by which the
|
|
image is shifted relative to the west edge of the medium
|
|
(see NORTH-EDGE-OFFSET). The adjustment is for the
|
|
first printed side of the medium only. A positive value
|
|
moves the image away from the west edge of the medium.
|
|
A negative value moves the image closer to the west edge
|
|
of the medium. The value 0 will return the image to its
|
|
factory default position. The values in the sub array index
|
|
are from the media size table in the hpmib. This adjustment is done
|
|
on a paper size by paper size basis. The standard PCL5 codes for
|
|
paper size are used for the value used in the OID. Please see S_ARRAY_SUB1
|
|
for legal values. The data for this object is stored in NVRAM."
|
|
::= { media-size 2 }
|
|
|
|
|
|
media-size-west-edge-second-side-offset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the number of 300 dpi dots by which the image
|
|
is shifted relative to the west edge of the medium (see
|
|
NORTH-EDGE-OFFSET). The adjustment is for the second printed
|
|
side of the medium only. A positive value moves the image away
|
|
from the west edge of the medium. A negative value moves the
|
|
image closer to the west edge of the medium. The value 0 will
|
|
return the image to its factory default position.
|
|
Additional information:
|
|
Returns or sets the number of 300 dpi dots by which the
|
|
image is shifted relative to the west edge of the medium
|
|
(see NORTH-EDGE-OFFSET). The adjustment is for the
|
|
second printed side of the medium only. A positive value
|
|
moves the image away from the west edge of the medium.
|
|
A negative value moves the image closer to the west edge
|
|
of the medium. The value 0 will return the image to its
|
|
factory default position. The values in the sub array index
|
|
are from the media size table in the hpmib.
|
|
This adjustment is done on a paper size by paper size basis.
|
|
The standard PCL5 codes for paper size are used for the value
|
|
used in the OID. Please see S_ARRAY_SUB1 for legal values.
|
|
The data for this object is stored in NVRAM."
|
|
::= { media-size 3 }
|
|
|
|
|
|
media-size-west-edge-side-offset-by-tray OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or sets the number of 300 dpi dots by which the image
|
|
is shifted relative to the west edge of the medium (see
|
|
NORTH-EDGE-OFFSET). A positive value moves the image away from
|
|
the west edge of the medium. A negative value moves the image
|
|
closer to the west edge of the medium. The value 0 will return
|
|
the image to its factory default position. Each OID binding
|
|
corresponds to a valid tray number for this product. There can
|
|
be a maximum of 15 trays, a combination of internal and
|
|
external trays. Products that support other combinations of
|
|
trays will specify this information in the device pos. The data
|
|
for this object is stored in NVRAM.
|
|
Additional information:
|
|
Returns or sets the number of 300 dpi dots by which the
|
|
image is shifted relative to the west edge of the medium
|
|
(see NORTH-EDGE-OFFSET). A positive value moves the
|
|
image away from the west edge of the medium. A negative
|
|
value moves the image closer to the west edge of the medium.
|
|
The value 0 will return the image to its factory default
|
|
position.
|
|
|
|
Each OID binding corresponds to a valid tray number
|
|
for this product. There can be a maximum of 15 trays, a
|
|
combination of internal and external trays. Products that
|
|
support other combinations of trays will specify this
|
|
information in the device pos. The data for this object
|
|
is stored in NVRAM."
|
|
::= { media-size 4 }
|
|
|
|
|
|
printed-media-simplex-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..930576247)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of simplex pages printed in this media size.
|
|
Additional information:
|
|
The 5 usage (simplex/duplex count, simplex/duplex click
|
|
charge and paper size total) objects described here and
|
|
below detail the usage for the printer for each paper
|
|
size defined in the PCL Implementor's Guide and in the
|
|
Media Size Table in the hpmib.txt. The OID binding is
|
|
based on the click attribute and paper size.
|
|
For example:
|
|
|
|
The format for the OID is as follows:
|
|
|
|
3.4.1.5.x.y
|
|
<-----> | |
|
|
| | \
|
|
/ | paper size
|
|
/ \
|
|
PRINTER-CLICK_TOTALS ROOT \
|
|
OID click attribute 1..5
|
|
|
|
x values are 1..5:
|
|
|
|
1) simplex count
|
|
2) simplex click charge
|
|
3) duplex count
|
|
4) duplex click charge
|
|
5) printer or scanner paper size total (i.e. depends if the
|
|
root OID is referrring to the printer or scanner).
|
|
|
|
y : paper size as defined in the Media Size Table in the
|
|
hpmib.txt "
|
|
::= { printed-media-usage 1 }
|
|
|
|
|
|
printed-media-simplex-charge OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Charge for each simplex page printed in this media size."
|
|
::= { printed-media-usage 2 }
|
|
|
|
|
|
printed-media-duplex-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..930576247)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of duplex pages printed in this media size."
|
|
::= { printed-media-usage 3 }
|
|
|
|
|
|
printed-media-duplex-charge OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Charge for each duplex page printed in this media size.
|
|
Additional information:
|
|
The click charges for duplex printed media."
|
|
::= { printed-media-usage 4 }
|
|
|
|
|
|
printed-media-total-charge OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The total charge for pages printed in this media size."
|
|
::= { printed-media-usage 5 }
|
|
|
|
|
|
printed-media-maximum-pixels-per-page OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of pixels required to completely fill a page of this
|
|
media size. The device POS will specify the resolution at which
|
|
this pixel count was calculated.
|
|
Additional information:
|
|
The number of pixels required to fill a page of a
|
|
specific media size. The OID binding is the media
|
|
size you to query for. Only media sizes which the
|
|
printer supports will be available."
|
|
::= { printed-media-usage 6 }
|
|
|
|
|
|
printed-media-combined-total OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of letter equivalently weighted pages both color
|
|
and mono combined with this printer.
|
|
Additional information:
|
|
The combined total per page size of simplex and duplex
|
|
color pages plus simplex and duplex mono pages."
|
|
::= { printed-media-usage 7 }
|
|
|
|
|
|
usage-printer-total-charge OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total printer charge for all paper sizes printed."
|
|
::= { printer-accounting 2 }
|
|
|
|
|
|
usage-average-toner-coverage OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Reports the average toner area coverage of all pages printed
|
|
over the life of the device. Counts pixels on each page,
|
|
divides pixel count by pixels possible on a page to give the
|
|
percentage of coverage, and keeps a rolling average percent
|
|
weighted by area printed."
|
|
::= { printer-accounting 3 }
|
|
|
|
|
|
usage-staple-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..930576247)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of staples used."
|
|
::= { printer-accounting 4 }
|
|
|
|
|
|
usage-instructions-line1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The first line of usage instructions for the device
|
|
user.Appears on Line 1 of the usage page."
|
|
::= { printer-accounting 5 }
|
|
|
|
|
|
usage-instructions-line2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The second line of usage instructions for the device
|
|
user.Appears on Line 1 of the usage page."
|
|
::= { printer-accounting 6 }
|
|
|
|
|
|
usage-instructions-line3 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The third line of usage instructions for the device
|
|
user.Appears on Line 1 of the usage page."
|
|
::= { printer-accounting 7 }
|
|
|
|
|
|
usage-instructions-line4 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The fourth line of usage instructions for the device
|
|
user.Appears on Line 1 of the usage page."
|
|
::= { printer-accounting 8 }
|
|
|
|
|
|
printed-modes-usage-total OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
" This object reports the total color and mono print modes usage
|
|
for the life of the printer. This value is reported on the
|
|
usage page."
|
|
::= { printer-accounting 9 }
|
|
|
|
|
|
source-tray-usage-total OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object reports the total source tray usage for the life of
|
|
the printer. This value is reported on the usage page."
|
|
::= { printer-accounting 10 }
|
|
|
|
|
|
destination-bin-usage-total OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object reports the total destination bin usage for the
|
|
life of the printer. This value is reported on the usage page."
|
|
::= { printer-accounting 11 }
|
|
|
|
|
|
usage-printer-mono-total-charge OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total printer charge for all paper sizes printed in monochrome
|
|
only.
|
|
Additional information:
|
|
This is the total charge over the range of all
|
|
supported media sizes for duplex and simplex mono
|
|
pages."
|
|
::= { printer-accounting 12 }
|
|
|
|
|
|
usage-printer-color-total-charge OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total printer charge for all paper sizes printed in color
|
|
only.
|
|
Additional information:
|
|
This is the total charge over the range of all
|
|
supported media sizes for duplex and simplex color
|
|
pages."
|
|
::= { printer-accounting 13 }
|
|
|
|
|
|
printed-media-color-simplex-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of color simplex pages printed in this media
|
|
size."
|
|
::= { printed-media-color-usage 1 }
|
|
|
|
|
|
printed-media-color-duplex-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of color duplex pages printed in this media size."
|
|
::= { printed-media-color-usage 3 }
|
|
|
|
|
|
printed-media-color-total-count OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The total count for color pages printed in this media size."
|
|
::= { printed-media-color-usage 5 }
|
|
|
|
|
|
printed-modes-mono-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of mono pages printed in this fuser mode."
|
|
::= { printed-modes-usage 1 }
|
|
|
|
|
|
printed-modes-color-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of color pages printed in this fuser mode."
|
|
::= { printed-modes-usage 3 }
|
|
|
|
|
|
printed-modes-total-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The total count for pages printed in this fuser mode."
|
|
::= { printed-modes-usage 5 }
|
|
|
|
|
|
source-tray-usage-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of pages printed from this source tray.
|
|
Additional information:
|
|
This object will track how many images have been printed
|
|
with the original source tray as one of the following:
|
|
1. Envelope Feeder
|
|
2. Manual Feed Tray
|
|
3. MP Tray
|
|
4. Tray 1
|
|
5. Tray 2
|
|
6. Tray 3
|
|
7. External Tray
|
|
8. Other"
|
|
::= { source-tray-usage 1 }
|
|
|
|
|
|
destination-bin-usage-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Total number of pages printed to this destination bin.
|
|
Additional information:
|
|
This object will track how many images have been printed
|
|
with the original destination bin as one of the following:
|
|
1. Face Down Bin
|
|
2. Face Up Bin
|
|
3. External Bin
|
|
4. Other"
|
|
::= { destination-bin-usage 1 }
|
|
|
|
|
|
low-marking-agent-processing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eStop(1),
|
|
eCont(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes how the device processes a low marking agent
|
|
event. If eCont, then the device continues to print. If eStop,
|
|
then the device stops until a continue event occurs."
|
|
::= { settings-marking-agent 3 }
|
|
|
|
|
|
out-marking-agent-processing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eStop(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Returns or changes how the device processes an out marking
|
|
agent event. If eCont, then the device continues to print. If
|
|
eStop, then the device stops until a continue event occurs.
|
|
Additional information:
|
|
Returns a value that indicates how the device processes an out
|
|
marking agent event. This device will always stop when a supply
|
|
reaches an out condition and will not continue until a non-out
|
|
supply is installed."
|
|
::= { settings-marking-agent 10 }
|
|
|
|
|
|
media-size-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The number of impressions printed on sheets of this media size.
|
|
The device POS should state whether this value is lost across a
|
|
power cycle or is kept in permanent storage.
|
|
Additional information:
|
|
The value of this object is persistent across a power cycle.
|
|
|
|
The index for these objects, the last number of the OID, uniquely
|
|
identifies the paper size. This value corresponds to the page sizes listed below.
|
|
These values are also documented in the PCL Implementor's Guide
|
|
and the PML Master MIB.
|
|
|
|
1 US-Executive
|
|
2 US-Letter
|
|
3 US-Legal
|
|
10 Foolscap (8.5 x 13)
|
|
11 eLedger
|
|
17 ROC 16K
|
|
18 JIS Executive
|
|
19 eROC8K
|
|
25 ISO and JIS A5
|
|
26 ISO and JIS A4
|
|
27 ISO and JIS A3
|
|
45 JIS B5
|
|
46 JIS B4
|
|
65 ISO B5
|
|
72 eJapanesePostcardDouble
|
|
80 Monarch
|
|
81 Commercal-10
|
|
90 International DL
|
|
91 International C5
|
|
100 International B5
|
|
101 Custom
|
|
258 eUSLetterR
|
|
282 ISO JISA4R
|
|
32767 Unknown Paper Size"
|
|
::= { media-size 1 }
|
|
|
|
|
|
consumable-status-cartridge-model OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to read the cartridge model number
|
|
associated with this consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 1 }
|
|
|
|
|
|
consumable-status-manufacturing-date OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the date on which this consumable
|
|
was manufactured. The format of the string is 'YYYYMMDD', where
|
|
YYYY is the year, MM is the month (1-12), and DD is the day
|
|
(1-31).
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 2 }
|
|
|
|
|
|
consumable-status-serial-number OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the serial number for this
|
|
consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 3 }
|
|
|
|
|
|
consumable-status-capacity-units OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePagesAt5PercentCoverage(1),
|
|
e1KPagesAt5PercentCoverage(2),
|
|
e10KPagesAt5PercentCoverage(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the usage units used by the
|
|
CONSUMABLE-STATUS-TOTAL-CAPACITY object.
|
|
Additional information:
|
|
This object will only exist on engines that are E-Label
|
|
capable, but will exist on these engines regardless of
|
|
the cartridge being Authentic HP or NonHP. This object
|
|
can be used to ensure the capability of the E-Label
|
|
feature for a given engine."
|
|
::= { consumable-status 4 }
|
|
|
|
|
|
consumable-status-total-capacity OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the total capacity of a new
|
|
consumable of this type. The PML object
|
|
CONSUMABLE-STATUS-CAPACITY-UNITS can be used to determine the
|
|
units of measure for this PML object.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 5 }
|
|
|
|
|
|
consumable-status-reseller-id OBJECT-TYPE
|
|
SYNTAX INTEGER(0..2147483647)
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to query and set the reseller ID for this
|
|
consumable. This ID is represented as an integer that is
|
|
essentially an enumeration representing a specific reseller
|
|
that sells this consumable. The device POS should detail the
|
|
mapping of reseller name to reseller ID. In this way the
|
|
reseller can program into the consumable a suggested reseller
|
|
which can in turn be mapped to a web page through which a
|
|
replacement can be purchased.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist. The reseller ID is an integer that must
|
|
be mapped external to the printer by a host application.
|
|
The value stored must be specific to an external application."
|
|
::= { consumable-status 6 }
|
|
|
|
|
|
consumable-status-info OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to read and write the various status flags
|
|
supported by this consumable. For LaserJet 4100, LaserJet 4550 the collection
|
|
bits supported include:
|
|
cMarkedAsReordered - indicates the consumable has been
|
|
reordered. This is the only bit that can be both read
|
|
and written.
|
|
cTonerLowCondition - indicates a toner low condition has
|
|
occured. This bit in the collection is read-only to
|
|
PML.
|
|
cTonerOutCondition - indicates a toner out condition has
|
|
occured. This bit in the collection is read-only to
|
|
PML.
|
|
cDeveloperLowCondition - indicates a developer low
|
|
condition has occured. This bit in the collection is
|
|
read-only to PML.
|
|
cDeveloperOutCondition - indicates a developer out
|
|
condition has occured. This bit in the collection is
|
|
read-only to PML.
|
|
cDrumLowCondition - indicates a drum low condition has
|
|
occured. This bit in the collection is read-only to
|
|
PML.
|
|
cDrumOutCondition - indicates a drum out condition has
|
|
occured. This bit in the collection is read-only to
|
|
PML.
|
|
cWasteTonerFullCondition - indicates a waste toner full
|
|
condition has occured. This bit in the collection is
|
|
read-only to PML.
|
|
cWasteTonerFullWarningCondition - indicates a waste toner
|
|
full warning condition has occured. This bit in the
|
|
collection is read-only to PML.
|
|
cNewConsumable - indicates the consumable is new and has
|
|
never been used. This bit in the collection is
|
|
read-only to PML.
|
|
cTonerLowNotificationSent - inidicates that toner low
|
|
notification has been sent for this consumable. This
|
|
bit in the collection is readonly.
|
|
cTonerOutNotificationSent - inidicates that toner out
|
|
notification has been sent for this consumable. This
|
|
bit in the collection is read only.
|
|
cAnyPartLowCondition - indicates that at least one part of
|
|
this consumable has reached a low condition. This bit
|
|
in the collection is read-only to PML.
|
|
cAnyPartOutCondition - indicates that at least one part of
|
|
this consumable has reached an out condition. This bit
|
|
in the collection is read-only to PML.
|
|
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 7 }
|
|
|
|
|
|
consumable-status-first-install-date OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the date on which this consumable
|
|
was first installed. The format of the string is 'YYYYMMDD'.
|
|
Where:
|
|
YYYY is the year.
|
|
MM is the month (1-12).
|
|
DD is the day (1-31).
|
|
The device POS needs to indicate what will be written in the
|
|
event the printer does not have a real time clock.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist. For printers without internal clocks, the
|
|
date will always be 20000101."
|
|
::= { consumable-status 8 }
|
|
|
|
|
|
consumable-status-last-use-date OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the date on which this consumable
|
|
was last used. The format of the string is 'YYYYMMDD'. Where:
|
|
|
|
YYYY is the year.
|
|
MM is the month (1-12).
|
|
DD is the day (1-31).
|
|
The device POS needs to indicate what will be written in the
|
|
event the printer does not have a real time clock.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist. For printers without internal clocks, the
|
|
date will always be 20000101."
|
|
::= { consumable-status 9 }
|
|
|
|
|
|
consumable-status-page-count-a3-ledger OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of pages that have
|
|
been printed by this consumable that are of the specified media
|
|
size - A3 or Ledger.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 10 }
|
|
|
|
|
|
consumable-status-page-count-legal OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of pages that have
|
|
been printed by this consumable that are of the specified media
|
|
size - Legal.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 11 }
|
|
|
|
|
|
consumable-status-page-count-a4-letter OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of pages that have
|
|
been printed by this consumable that are of the specified media
|
|
size - A4 or Letter.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 12 }
|
|
|
|
|
|
consumable-status-page-count-envelope OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of pages that have
|
|
been printed by this consumable that are of the specified media
|
|
size - Envelope.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 14 }
|
|
|
|
|
|
consumable-status-page-count-xy-other OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of pages that have
|
|
been printed by this consumable that are of the specified media
|
|
size - XY or Other.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 15 }
|
|
|
|
|
|
consumable-status-job-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of jobs that have been
|
|
printed by this consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 16 }
|
|
|
|
|
|
consumable-status-usage-units OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePixels(1),
|
|
eTenthsOfGrams(2),
|
|
eGrams(3),
|
|
eRotations(4),
|
|
ePages(5),
|
|
eImpressions(6),
|
|
ePercentLifeRemaining(7),
|
|
eOther(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the units used to measure the
|
|
capacity of this consumable.
|
|
Additional information:
|
|
This object will only exist on engines that are E-Label
|
|
capable, but will exist on these engines regardless of
|
|
the cartridge being Authentic HP or NonHP. This object
|
|
can be used to ensure the capability of the E-Label
|
|
feature for a given engine."
|
|
::= { consumable-status 17 }
|
|
|
|
|
|
consumable-status-usage-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of usage units that
|
|
remain in this consumable. The units of measurement used by
|
|
this object can be obtained by querying the
|
|
CONSUMABLE-STATUS-USAGE-UNITS object.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 18 }
|
|
|
|
|
|
consumable-status-manufacturer-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the name of the manufacturer of
|
|
this consumable. The device POS will specify the set of
|
|
manufacturers that could be returned.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 19 }
|
|
|
|
|
|
consumable-status-oem-name OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the name of the OEM of this
|
|
consumable. This object will typically return the string 'HP'.
|
|
The device POS will specify if other OEM consumables are
|
|
supported.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist. This object should always return 'HP' as
|
|
the OEM name"
|
|
::= { consumable-status 20 }
|
|
|
|
|
|
consumable-status-engine-usage-units OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePixels(1),
|
|
eTenthsOfGrams(2),
|
|
eGrams(3),
|
|
eRotations(4),
|
|
ePages(5),
|
|
eImpressions(6),
|
|
ePercentLifeRemaining(7),
|
|
eOther(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the units used to measure the
|
|
capacity of this consumable as reported by the Engine.
|
|
Additional information:
|
|
This object will only exist on engines that are E-Label
|
|
capable, but will exist on these engines regardless of
|
|
the cartridge being Authentic HP or NonHP. This object
|
|
can be used to ensure the capability of the E-Label
|
|
feature for a given engine."
|
|
::= { consumable-status 21 }
|
|
|
|
|
|
consumable-status-engine-job-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of jobs, as reported
|
|
by the printer, that have been printed by this consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 23 }
|
|
|
|
|
|
consumable-status-total-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the total number of pages that
|
|
have been printed by this consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 24 }
|
|
|
|
|
|
consumable-status-mono-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of monochrome pages
|
|
that have been printed by this consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 25 }
|
|
|
|
|
|
consumable-status-color-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of color pages that
|
|
have been printed by this consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 26 }
|
|
|
|
|
|
consumable-status-total-equiv-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the total number of equivelent
|
|
Letter/A4 pages that have been printed by this consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 27 }
|
|
|
|
|
|
consumable-status-total-equiv-mono-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the total number of monochrome
|
|
equivelent Letter/A4 pages that have been printed by this
|
|
consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 28 }
|
|
|
|
|
|
consumable-status-total-equiv-color-page-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the total number of color
|
|
equivelent Letter/A4 pages that have been printed by this
|
|
consumable.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 29 }
|
|
|
|
|
|
consumable-status-input-option-sheet-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of pages that have
|
|
been printed by this consumable that had the input option as
|
|
their source.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 30 }
|
|
|
|
|
|
consumable-status-duplex-sheet-count OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of pages that have
|
|
been printed by this consumable that were also duplexed
|
|
(printed both sides).
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 31 }
|
|
|
|
|
|
consumable-status-page-count-half-speed OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of pages that have
|
|
been printed by this consumable at one half engine speed.
|
|
Additional information:
|
|
This object will only exist for Authentic HP consumables.
|
|
If the cartridge is deemed to be NonHP, then this object
|
|
will not exist."
|
|
::= { consumable-status 32 }
|
|
|
|
|
|
consumable-status-developer-life-units OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePixels(1),
|
|
eTenthsOfGrams(2),
|
|
eGrams(3),
|
|
eRotations(4),
|
|
ePages(5),
|
|
eImpressions(6),
|
|
ePercentLifeRemaining(7),
|
|
eOther(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the units used to measure the
|
|
developer life remaining.
|
|
Additional information:
|
|
This object will only exist on engines that are E-Label
|
|
capable, but will exist on these engines regardless of
|
|
the cartridge being Authentic HP or NonHP. This object
|
|
can be used to ensure the capability of the E-Label
|
|
feature for a given engine."
|
|
::= { consumable-status 36 }
|
|
|
|
|
|
consumable-status-developer-life OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of life units,
|
|
remaining in the developer. The units of measurement used by
|
|
this object can be obtained by querying the
|
|
CONSUMABLE-STATUS-DEVELOPER-LIFE-UNITS object. This object will
|
|
not exist if this consumable does not contain a developer.
|
|
Additional information:
|
|
This object will only exist on engines that are E-Label
|
|
capable, but will exist on these engines regardless of
|
|
the cartridge being Authentic HP or NonHP. This object
|
|
can be used to ensure the capability of the E-Label
|
|
feature for a given engine."
|
|
::= { consumable-status 37 }
|
|
|
|
|
|
consumable-status-drum-life-units OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePixels(1),
|
|
eTenthsOfGrams(2),
|
|
eGrams(3),
|
|
eRotations(4),
|
|
ePages(5),
|
|
eImpressions(6),
|
|
ePercentLifeRemaining(7),
|
|
eOther(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the units used to measure the
|
|
drum life remaining.
|
|
Additional information:
|
|
This object will only exist on engines that are E-Label
|
|
capable, but will exist on these engines regardless of
|
|
the cartridge being Authentic HP or NonHP. This object
|
|
can be used to ensure the capability of the E-Label
|
|
feature for a given engine."
|
|
::= { consumable-status 38 }
|
|
|
|
|
|
consumable-status-drum-life OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to report the number of life units,
|
|
remaining in the drum. The units of measurement used by this
|
|
object can be obtained by querying the CONSUMABLE-
|
|
STATUS-DRUM-LIFE-UNITS object. This object will not exist if
|
|
this consumable does not contain a drum.
|
|
Additional information:
|
|
This object will only exist on engines that are E-Label
|
|
capable, but will exist on these engines regardless of
|
|
the cartridge being Authentic HP or NonHP. This object
|
|
can be used to ensure the capability of the E-Label
|
|
feature for a given engine."
|
|
::= { consumable-status 39 }
|
|
|
|
|
|
consumable-reorder-url OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to read and write the URL that can be used
|
|
to reorder consumables for this device. This URL is set at the
|
|
factory but can be updated by a reseller or third party.
|
|
Additional information:
|
|
The URL can be up to 64 characters long."
|
|
::= { consumables 2 }
|
|
|
|
|
|
consumable-life-usage-units-remaining OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object reports the current estimate of the number of usage
|
|
units that remain before this supply is depleted. An installed
|
|
supply that cannot report such a number will return a value of
|
|
-2. It is the reponsibility of the host application to query
|
|
each supply in order to determine an overall device
|
|
USAGE-UNITS-REMAINING number - the lowest value returned. The
|
|
unit of measure for this life estimate is determined by reading
|
|
the corresponding CONSUMABLE-LIFE-USAGE-UNITS object.
|
|
Additional information:
|
|
This object will return the Pages or Estimated Pages remaining for
|
|
the speciffic supply requested by the leaf node of this object."
|
|
::= { consumables-life 1 }
|
|
|
|
|
|
consumable-life-usage-units OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ePagesRemaining(1),
|
|
eEstimatedPagesRemaining(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object reports current usage units in use by the
|
|
corresponding CONSUMABLE-LIFE-USAGE-UNITS-REMAINING object.
|
|
Additional information:
|
|
This object returns the units that CONSUMABLE-LIFE-USAGE-UNITS-REMAINING
|
|
is returned in. Either ePagesRemaining(1) or eEstimatedPagesRemaining(2)."
|
|
::= { consumables-life 2 }
|
|
|
|
|
|
printer-average-marking-agent-coverage OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to read the average marking agent coverage
|
|
for a given color plane. It is a real number that represents
|
|
percentage full and will read from 0 to 100%. This object
|
|
obsoletes or replaces USAGE-AVERAGE-TONER-COVERAGE which could
|
|
only be used for black toner coverage information.
|
|
Additional information:
|
|
The average percent of toner coverage for a specific
|
|
color plane. The OID binding is the color plane.
|
|
Only color planes which the printer supports will be
|
|
available. This is only available if a hard disk is
|
|
installed."
|
|
::= { printer-average 1 }
|
|
|
|
|
|
printer-average-marking-agent-coverage-sum OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to read the accumulated sum of the percent
|
|
coverage numbers calculated on a per page basis over the life
|
|
of the printer.
|
|
Additional information:
|
|
The sum of the percent toner coverages for all
|
|
impressions printed. The OID binding is the color
|
|
plane. Only color planes which the printer supports
|
|
will be available."
|
|
::= { printer-average 2 }
|
|
|
|
|
|
printer-average-marking-agent-coverage-sum-squared OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to read the accumulated sum of the squares
|
|
of the percent coverage numbers calculated on a per page basis
|
|
over the life of the printer.
|
|
Additional information:
|
|
The sum of the percent toner coverages squared for
|
|
all impressions printed. The OID binding is the
|
|
color plane. Only color planes which the printer
|
|
supports will be available."
|
|
::= { printer-average 3 }
|
|
|
|
|
|
printer-average-marking-agent-units-per-gram OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to read the marking agent units of measure
|
|
per gram. This is typically a conversion factor for converting
|
|
pixels of toner to grams. This pixels-per-gram value is used to
|
|
calculate the estimated number of pages remaining for a given
|
|
marking agent."
|
|
::= { printer-average 4 }
|
|
|
|
|
|
printer-average-marking-agent-coverage-actual OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object is used to read the actual average marking agent
|
|
coverage for a given color plane. It is a real number that
|
|
represents percent coverage and will read from 0 to 100%. This
|
|
object will return the same value as
|
|
PRINTER-AVERAGE-MARKING-AGENT-COVERAGE except under certain
|
|
conditions which will be specified in the device POS.
|
|
Additional information:
|
|
This object will return the historical page coverage based on
|
|
the specific supply requested. It is not based on the printers
|
|
historical value"
|
|
::= { printer-average 5 }
|
|
|
|
|
|
|
|
|
|
web-server-url OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Universal Resource Locator (URL) from which the Embedded Web
|
|
Server can be configured. Any limitation on the size of this
|
|
URL will be specified in the device POS."
|
|
::= { settings-webserver 2 }
|
|
|
|
|
|
web-server-security OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Each collection bit represents a device or Embedded Web Server
|
|
feature that can be enabled or disabled via this object."
|
|
::= { settings-webserver 3 }
|
|
|
|
|
|
firmware-download-write-status-supported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eFalse(1),
|
|
eTrue(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object provides information on whether the printer has the
|
|
ability to communicate the write-status of the firmware
|
|
download while the download is taking place."
|
|
::= { firmware-download 1 }
|
|
|
|
|
|
firmware-download-write-time OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"If the design of the firmware-download implementation does not
|
|
allow PML interaction during the download process, this value
|
|
provides an estimation of the time where the printer will not
|
|
be able to engage in PML communication.
|
|
Additional information:
|
|
If the design of the firmware-download
|
|
implementation does not allow PML interaction during
|
|
the download process, this value provides an
|
|
estimation of the time where the printer will not be
|
|
able to engage in PML communication. The calculated
|
|
time is expected to be 140 secs. However, this time
|
|
may increase as high as 280 secs as the flash part
|
|
nears the maximum flash count."
|
|
::= { firmware-download 2 }
|
|
|
|
|
|
firmware-download-write-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Tells the number of times that firmware has been downloaded to
|
|
the flash part.
|
|
Additional information:
|
|
Tells the number of times that firmware has been
|
|
downloaded to the flash part. The default value will
|
|
vary depending on how many times the firmware is
|
|
rolled before shipping."
|
|
::= { firmware-download 3 }
|
|
|
|
|
|
firmware-download-current-state OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eIdle(1),
|
|
eReceivingImage(2),
|
|
eReceivedImageError(3),
|
|
eVerifyingImage(4),
|
|
eVerifiedImageError(5),
|
|
eWritingImage(6),
|
|
eWritingImageError(7),
|
|
eDownloadComplete(8),
|
|
eOKtoShutDown(9),
|
|
eCancelDownload(10),
|
|
eShuttingDown(11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the current or last reportable state of the firmware
|
|
download process. The current state may not necessarily be the
|
|
current state, but could be the post-mortem state."
|
|
::= { firmware-download 4 }
|
|
|
|
|
|
firmware-download-maximum-write-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Reports the manufacturer specified number of times that
|
|
firmware can be downloaded to the flash part. A value of -1
|
|
means that there is no limit. A value of 0 means that
|
|
downloading firmware is not permitted by this part. Any other
|
|
positive integer value corresponds to the number of times that
|
|
firmware can be downloaded to the flash part.
|
|
Additional information:
|
|
Reports the manufacturer specified number of
|
|
times that firmware can be downloaded to the flash
|
|
part. A value of -1 means that there is no limit.
|
|
A value of 0 means that downloading firmware is not
|
|
permitted by this part. Any other positive integer
|
|
value corresponds to the number of times that
|
|
firmware can be downloaded to the flash part. The
|
|
current maximum write count is 500. This may change
|
|
as flash technology evolves."
|
|
::= { firmware-download 5 }
|
|
|
|
|
|
firmware-download-name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This returns the name of the printer. This should match the
|
|
name in the header of the upgrade image being sent to the flash
|
|
part. If the name does not match with the name returned then
|
|
the image that we are attempting to download does not upgrade
|
|
the printer firmware.
|
|
Additional information:
|
|
This object returns the HP name of the printer.
|
|
This should match what is in the PJL header of the RFU job
|
|
Web Jet Admin uses this to ensure the printer is available
|
|
to be upgraded."
|
|
::= { firmware-download 6 }
|
|
|
|
|
|
firmware-download-version OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object will return a string value representing the current
|
|
revision of firmware that the printer is operating with. This
|
|
is used to determine if code needs to be upgraded when an
|
|
firmware bundle comes in, in an upgrade job.
|
|
Additional information:
|
|
Web Jet Admin uses the version string that is returned to
|
|
determine what peices of an RFU bundle need to be upgraded
|
|
when an RFU job is being built. This objects will return
|
|
the version string of the printer."
|
|
::= { firmware-download 7 }
|
|
|
|
|
|
upgradable-devices-write-status-supported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eFalse(1),
|
|
eTrue(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object provides information on whether the upgradable
|
|
device has the ability to communicate the write-status of the
|
|
upgrade while the upgrade is taking place."
|
|
::= { upgradable-devices 1 }
|
|
|
|
|
|
upgradable-devices-write-time OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"If the design of the device upgrade implementation does not
|
|
allow PML interaction during the download process, this value
|
|
provides an estimation of the time where the device will not be
|
|
able to engage in PML communication. The time returned will
|
|
depend upon what device is attempting to be upgraded."
|
|
::= { upgradable-devices 2 }
|
|
|
|
|
|
upgradable-devices-write-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Tells the number of times that firmware for device X has been
|
|
downloaded to the flash part. The default value will vary
|
|
depending on how many times the firmware is rolled before
|
|
shipping."
|
|
::= { upgradable-devices 3 }
|
|
|
|
|
|
upgradable-devices-current-state OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eIdle(1),
|
|
eReceivedImage(2),
|
|
eReceivedImageError(3),
|
|
eVerifiedImage(4),
|
|
eVerifiedImageError(5),
|
|
eWritingImage(6),
|
|
eWritingImageError(7),
|
|
eUpgradeComplete(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Provides the current or last reportable state of the device
|
|
upgrade process. The current state may not necessarily be the
|
|
current state, but could be the post-mortem state."
|
|
::= { upgradable-devices 4 }
|
|
|
|
|
|
upgradable-devices-max-write-count OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Reports the manufacturer specified number of times that
|
|
firmware for device X can be downloaded to the flash part. A
|
|
value of -1 means that there is no limit. A value of 0 means
|
|
that downloading firmware is not permitted by this part. Any
|
|
other positive integer value corresponds to the number of times
|
|
that the firmware for device X can be downloaded to the flash
|
|
part. The current maximum write count is 500. This may change
|
|
as flash technology evolves."
|
|
::= { upgradable-devices 5 }
|
|
|
|
|
|
upgradable-devices-name OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This returns the name of the upgradable device. This should
|
|
match the name in the header of the upgrade image being sent to
|
|
the flash part. If the name does not match with any of the
|
|
names returned then the device that we are attempting to
|
|
upgrade is unavailable for upgrading.
|
|
Additional information:
|
|
This object returns the HP name of the printer and the upgradable
|
|
devices. There is one Name object per upgradable device.
|
|
This should match what is in the PJL header of the RFU job
|
|
Web Jet Admin uses this to ensure the printer or device is
|
|
available to be upgraded."
|
|
::= { upgradable-devices 6 }
|
|
|
|
|
|
upgradable-devices-version OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object will return a string value representing the current
|
|
revision of firmware that device X is operating with. This is
|
|
used to determine if code needs to be upgraded when a firmware
|
|
bundle comes in, in an upgrade job.
|
|
Additional information:
|
|
Web Jet Admin uses the version string that is returned to
|
|
determine what peices of an RFU bundle need to be upgraded
|
|
when an RFU job is being built. This internal object will
|
|
return the current version string of the printer or device
|
|
that it corresponds to."
|
|
::= { upgradable-devices 7 }
|
|
|
|
|
|
remote-upgrade-enable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eOff(1),
|
|
eOn(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enables or disables the ability to upgrade the firmware
|
|
associated with any device that is available to be upgraded.
|
|
This will be set to on or off at the RFU level in that if this
|
|
mode is on any available device can be upgraded and if this
|
|
mode is off none of the devices can be upgraded. There is not
|
|
an individual mode for each device. Trying to set this to a
|
|
value other than eOn or eOff will cause an UnsupportedValue
|
|
error to occur."
|
|
::= { upgradable-devices 8 }
|
|
|
|
|
|
END
|