7504 lines
334 KiB
Plaintext
7504 lines
334 KiB
Plaintext
-- (C) COPYRIGHT HEWLETT-PACKARD COMPANY 2007.
|
||
--
|
||
-- LaserJet 3525 Printer Model Specific MIB.
|
||
--
|
||
-- Generated on Nov. 22, 2007.
|
||
--
|
||
-- Company names and product names mentioned herein may be
|
||
-- trademarks, and/or registered trademarks of their respective
|
||
-- companies.
|
||
--
|
||
-- For internal and external use.
|
||
--
|
||
-- This MIB describes all the printer model specific
|
||
-- objects supported by the LaserJet 3525 printer
|
||
-- when networked connected using a JetDirect print
|
||
-- server.
|
||
--
|
||
-- The following MIBs also contain objects supported
|
||
-- by a JetDirect connected LaserJet 3525 printer:
|
||
--
|
||
-- rfc 1514 Host Resources MIB
|
||
-- rfc 1759 Printer MIB
|
||
-- rfc 1213 MIB II
|
||
--
|
||
-- This MIB complies with the following RFCs:
|
||
--
|
||
-- rfc 1157 Simple Network Management Protocol
|
||
-- rfc 1155 Structure of Management Information
|
||
--
|
||
-- Notes:
|
||
--
|
||
-- 1) Objects containing a string which are defined in this MIB use the
|
||
-- first two bytes to hold the symbol set used to encode the string.
|
||
-- The Roman-8 symbol set has a hex encoding of 0x0115. Other
|
||
-- symbol sets are listed in the PCL 5 Comparison Guide in table
|
||
-- C-1 Symbol Set Values.
|
||
--
|
||
-- 2) Some of the objects included are only supported if an accessory
|
||
-- is installed. These accessories include:
|
||
-- MIO based accessories
|
||
-- SIMM based accessories
|
||
-- AT hard disk
|
||
-- Paper handling accessories
|
||
-- Adobe PostScript accessory
|
||
LJ3525-MIB DEFINITIONS ::= BEGIN
|
||
|
||
hp OBJECT IDENTIFIER ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) 11}
|
||
dm OBJECT IDENTIFIER ::= { hp nm(2) hpsystem(3) net-peripheral(9) netdm(4) 2}
|
||
|
||
DisplayString ::= OCTET STRING
|
||
|
||
device OBJECT IDENTIFIER ::= { dm 1 }
|
||
device-system OBJECT IDENTIFIER ::= { device 1 }
|
||
status-system OBJECT IDENTIFIER ::= { device-system 2 }
|
||
test OBJECT IDENTIFIER ::= { device-system 5 }
|
||
job OBJECT IDENTIFIER ::= { device-system 6 }
|
||
job-info OBJECT IDENTIFIER ::= { job 5 }
|
||
job-info-accounting OBJECT IDENTIFIER ::= { job-info 28 }
|
||
processing-subsystem OBJECT IDENTIFIER ::= { device 3 }
|
||
pml OBJECT IDENTIFIER ::= { processing-subsystem 4 }
|
||
pml-test OBJECT IDENTIFIER ::= { pml 1 }
|
||
accounting OBJECT IDENTIFIER ::= { device-system 16 }
|
||
printer-accounting OBJECT IDENTIFIER ::= { accounting 1 }
|
||
printed-media-usage OBJECT IDENTIFIER ::= { printer-accounting 1 }
|
||
printer-color-accounting OBJECT IDENTIFIER ::= { accounting 3 }
|
||
printed-media-color-usage OBJECT IDENTIFIER ::= { printer-color-accounting 1 }
|
||
printed-modes-accounting OBJECT IDENTIFIER ::= { accounting 4 }
|
||
printed-modes-usage OBJECT IDENTIFIER ::= { printed-modes-accounting 1 }
|
||
source-tray-accounting OBJECT IDENTIFIER ::= { accounting 5 }
|
||
source-tray-usage OBJECT IDENTIFIER ::= { source-tray-accounting 1 }
|
||
destination-bin-accounting OBJECT IDENTIFIER ::= { accounting 6 }
|
||
destination-bin-usage OBJECT IDENTIFIER ::= { destination-bin-accounting 1 }
|
||
destination-subsystem OBJECT IDENTIFIER ::= { device 4 }
|
||
print-engine OBJECT IDENTIFIER ::= { destination-subsystem 1 }
|
||
print-media OBJECT IDENTIFIER ::= { print-engine 8 }
|
||
media-size OBJECT IDENTIFIER ::= { print-media 5 }
|
||
print-meter OBJECT IDENTIFIER ::= { print-engine 11 }
|
||
printer-average OBJECT IDENTIFIER ::= { print-meter 1 }
|
||
control-panel-display OBJECT IDENTIFIER ::= { status-system 65 }
|
||
settings-system OBJECT IDENTIFIER ::= { device-system 1 }
|
||
interface OBJECT IDENTIFIER ::= { device-system 4 }
|
||
simm OBJECT IDENTIFIER ::= { interface 1 }
|
||
simm1 OBJECT IDENTIFIER ::= { simm 1 }
|
||
simm1-bank OBJECT IDENTIFIER ::= { simm1 6 }
|
||
simm1-bank1 OBJECT IDENTIFIER ::= { simm1-bank 1 }
|
||
simm1-bank2 OBJECT IDENTIFIER ::= { simm1-bank 2 }
|
||
simm2 OBJECT IDENTIFIER ::= { simm 2 }
|
||
simm2-bank OBJECT IDENTIFIER ::= { simm2 6 }
|
||
simm2-bank1 OBJECT IDENTIFIER ::= { simm2-bank 1 }
|
||
simm2-bank2 OBJECT IDENTIFIER ::= { simm2-bank 2 }
|
||
simm3 OBJECT IDENTIFIER ::= { simm 3 }
|
||
simm3-bank OBJECT IDENTIFIER ::= { simm3 6 }
|
||
simm3-bank1 OBJECT IDENTIFIER ::= { simm3-bank 1 }
|
||
simm3-bank2 OBJECT IDENTIFIER ::= { simm3-bank 2 }
|
||
simm4 OBJECT IDENTIFIER ::= { simm 4 }
|
||
simm4-bank OBJECT IDENTIFIER ::= { simm4 6 }
|
||
simm4-bank1 OBJECT IDENTIFIER ::= { simm4-bank 1 }
|
||
simm4-bank2 OBJECT IDENTIFIER ::= { simm4-bank 2 }
|
||
simm5 OBJECT IDENTIFIER ::= { simm 5 }
|
||
simm5-bank OBJECT IDENTIFIER ::= { simm5 6 }
|
||
simm5-bank1 OBJECT IDENTIFIER ::= { simm5-bank 1 }
|
||
simm5-bank2 OBJECT IDENTIFIER ::= { simm5-bank 2 }
|
||
settings-job OBJECT IDENTIFIER ::= { job 1 }
|
||
operating-system OBJECT IDENTIFIER ::= { device-system 19 }
|
||
pdl OBJECT IDENTIFIER ::= { processing-subsystem 3 }
|
||
settings-pdl OBJECT IDENTIFIER ::= { pdl 1 }
|
||
status-pdl OBJECT IDENTIFIER ::= { pdl 2 }
|
||
background-message OBJECT IDENTIFIER ::= { status-system 37 }
|
||
background-message1 OBJECT IDENTIFIER ::= { background-message 1 }
|
||
background-message2 OBJECT IDENTIFIER ::= { background-message 2 }
|
||
menus OBJECT IDENTIFIER ::= { print-engine 13 }
|
||
menus-test OBJECT IDENTIFIER ::= { menus 1 }
|
||
errorlog OBJECT IDENTIFIER ::= { device-system 11 }
|
||
error1 OBJECT IDENTIFIER ::= { errorlog 1 }
|
||
error2 OBJECT IDENTIFIER ::= { errorlog 2 }
|
||
error3 OBJECT IDENTIFIER ::= { errorlog 3 }
|
||
error4 OBJECT IDENTIFIER ::= { errorlog 4 }
|
||
error5 OBJECT IDENTIFIER ::= { errorlog 5 }
|
||
error6 OBJECT IDENTIFIER ::= { errorlog 6 }
|
||
error7 OBJECT IDENTIFIER ::= { errorlog 7 }
|
||
error8 OBJECT IDENTIFIER ::= { errorlog 8 }
|
||
error9 OBJECT IDENTIFIER ::= { errorlog 9 }
|
||
error10 OBJECT IDENTIFIER ::= { errorlog 10 }
|
||
error11 OBJECT IDENTIFIER ::= { errorlog 11 }
|
||
error12 OBJECT IDENTIFIER ::= { errorlog 12 }
|
||
error13 OBJECT IDENTIFIER ::= { errorlog 13 }
|
||
error14 OBJECT IDENTIFIER ::= { errorlog 14 }
|
||
error15 OBJECT IDENTIFIER ::= { errorlog 15 }
|
||
error16 OBJECT IDENTIFIER ::= { errorlog 16 }
|
||
error17 OBJECT IDENTIFIER ::= { errorlog 17 }
|
||
error18 OBJECT IDENTIFIER ::= { errorlog 18 }
|
||
error19 OBJECT IDENTIFIER ::= { errorlog 19 }
|
||
error20 OBJECT IDENTIFIER ::= { errorlog 20 }
|
||
error21 OBJECT IDENTIFIER ::= { errorlog 21 }
|
||
error22 OBJECT IDENTIFIER ::= { errorlog 22 }
|
||
error23 OBJECT IDENTIFIER ::= { errorlog 23 }
|
||
error24 OBJECT IDENTIFIER ::= { errorlog 24 }
|
||
error25 OBJECT IDENTIFIER ::= { errorlog 25 }
|
||
error26 OBJECT IDENTIFIER ::= { errorlog 26 }
|
||
error27 OBJECT IDENTIFIER ::= { errorlog 27 }
|
||
error28 OBJECT IDENTIFIER ::= { errorlog 28 }
|
||
error29 OBJECT IDENTIFIER ::= { errorlog 29 }
|
||
error30 OBJECT IDENTIFIER ::= { errorlog 30 }
|
||
error31 OBJECT IDENTIFIER ::= { errorlog 31 }
|
||
error32 OBJECT IDENTIFIER ::= { errorlog 32 }
|
||
error33 OBJECT IDENTIFIER ::= { errorlog 33 }
|
||
error34 OBJECT IDENTIFIER ::= { errorlog 34 }
|
||
error35 OBJECT IDENTIFIER ::= { errorlog 35 }
|
||
error36 OBJECT IDENTIFIER ::= { errorlog 36 }
|
||
error37 OBJECT IDENTIFIER ::= { errorlog 37 }
|
||
error38 OBJECT IDENTIFIER ::= { errorlog 38 }
|
||
error39 OBJECT IDENTIFIER ::= { errorlog 39 }
|
||
error40 OBJECT IDENTIFIER ::= { errorlog 40 }
|
||
error41 OBJECT IDENTIFIER ::= { errorlog 41 }
|
||
error42 OBJECT IDENTIFIER ::= { errorlog 42 }
|
||
error43 OBJECT IDENTIFIER ::= { errorlog 43 }
|
||
error44 OBJECT IDENTIFIER ::= { errorlog 44 }
|
||
error45 OBJECT IDENTIFIER ::= { errorlog 45 }
|
||
error46 OBJECT IDENTIFIER ::= { errorlog 46 }
|
||
error47 OBJECT IDENTIFIER ::= { errorlog 47 }
|
||
error48 OBJECT IDENTIFIER ::= { errorlog 48 }
|
||
error49 OBJECT IDENTIFIER ::= { errorlog 49 }
|
||
error50 OBJECT IDENTIFIER ::= { errorlog 50 }
|
||
channel OBJECT IDENTIFIER ::= { device 6 }
|
||
display OBJECT IDENTIFIER ::= { status-system 20 }
|
||
display-status OBJECT IDENTIFIER ::= { display 1 }
|
||
id OBJECT IDENTIFIER ::= { device-system 3 }
|
||
web-server OBJECT IDENTIFIER ::= { interface 6 }
|
||
settings-web-server OBJECT IDENTIFIER ::= { web-server 1 }
|
||
settings-prt-eng OBJECT IDENTIFIER ::= { print-engine 1 }
|
||
intray OBJECT IDENTIFIER ::= { print-engine 3 }
|
||
settings-intray OBJECT IDENTIFIER ::= { intray 1 }
|
||
ph OBJECT IDENTIFIER ::= { print-engine 7 }
|
||
settings-ph OBJECT IDENTIFIER ::= { ph 1 }
|
||
print-engine-test OBJECT IDENTIFIER ::= { print-engine 9 }
|
||
pdl-pcl OBJECT IDENTIFIER ::= { pdl 3 }
|
||
pdl-postscript OBJECT IDENTIFIER ::= { pdl 4 }
|
||
socket-ping OBJECT IDENTIFIER ::= { interface 7 }
|
||
active-print-jobs OBJECT IDENTIFIER ::= { job 2 }
|
||
job-being-parsed OBJECT IDENTIFIER ::= { active-print-jobs 1 }
|
||
job-info-attribute OBJECT IDENTIFIER ::= { job-info 23 }
|
||
held-job OBJECT IDENTIFIER ::= { job 7 }
|
||
held-job-info OBJECT IDENTIFIER ::= { held-job 1 }
|
||
held-job-control OBJECT IDENTIFIER ::= { held-job 2 }
|
||
source-subsystem OBJECT IDENTIFIER ::= { device 2 }
|
||
spooler OBJECT IDENTIFIER ::= { source-subsystem 4 }
|
||
settings-spooler OBJECT IDENTIFIER ::= { spooler 1 }
|
||
pjl OBJECT IDENTIFIER ::= { processing-subsystem 5 }
|
||
mio OBJECT IDENTIFIER ::= { interface 3 }
|
||
mio1 OBJECT IDENTIFIER ::= { mio 1 }
|
||
mio4 OBJECT IDENTIFIER ::= { mio 4 }
|
||
usb-interface OBJECT IDENTIFIER ::= { interface 9 }
|
||
usb OBJECT IDENTIFIER ::= { usb-interface 2 }
|
||
io OBJECT IDENTIFIER ::= { source-subsystem 1 }
|
||
settings-io OBJECT IDENTIFIER ::= { io 1 }
|
||
ports OBJECT IDENTIFIER ::= { io 3 }
|
||
port1 OBJECT IDENTIFIER ::= { ports 1 }
|
||
tables OBJECT IDENTIFIER ::= { device 7 }
|
||
remote-procedure-call OBJECT IDENTIFIER ::= { device-system 13 }
|
||
settings-rpc OBJECT IDENTIFIER ::= { remote-procedure-call 1 }
|
||
status-rpc OBJECT IDENTIFIER ::= { remote-procedure-call 2 }
|
||
file-system OBJECT IDENTIFIER ::= { device-system 10 }
|
||
settings-file-system OBJECT IDENTIFIER ::= { file-system 1 }
|
||
file-systems OBJECT IDENTIFIER ::= { file-system 3 }
|
||
file-system2 OBJECT IDENTIFIER ::= { file-systems 2 }
|
||
file-system3 OBJECT IDENTIFIER ::= { file-systems 3 }
|
||
file-system4 OBJECT IDENTIFIER ::= { file-systems 4 }
|
||
resource-manager OBJECT IDENTIFIER ::= { device-system 12 }
|
||
mass-storage-resources OBJECT IDENTIFIER ::= { resource-manager 3 }
|
||
mass-storage-block-driver OBJECT IDENTIFIER ::= { device-system 15 }
|
||
settings-mass-storage-bd OBJECT IDENTIFIER ::= { mass-storage-block-driver 1 }
|
||
status-mass-storage-bd OBJECT IDENTIFIER ::= { mass-storage-block-driver 2 }
|
||
status-prt-eng OBJECT IDENTIFIER ::= { print-engine 2 }
|
||
consumables OBJECT IDENTIFIER ::= { print-engine 10 }
|
||
consumables-1 OBJECT IDENTIFIER ::= { consumables 1 }
|
||
consumable-status OBJECT IDENTIFIER ::= { consumables-1 1 }
|
||
consumable-string OBJECT IDENTIFIER ::= { consumables 8 }
|
||
consumables-status OBJECT IDENTIFIER ::= { consumables 5 }
|
||
consumables-life OBJECT IDENTIFIER ::= { consumables-status 1 }
|
||
imaging OBJECT IDENTIFIER ::= { print-engine 6 }
|
||
webserver-proc-sub OBJECT IDENTIFIER ::= { processing-subsystem 9 }
|
||
settings-webserver OBJECT IDENTIFIER ::= { webserver-proc-sub 1 }
|
||
firmware-download OBJECT IDENTIFIER ::= { device-system 18 }
|
||
upgradable-devices OBJECT IDENTIFIER ::= { device-system 20 }
|
||
|
||
|
||
perm-store-init-occurred OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object will set the cAllPermDevices bit when a full perm
|
||
storage initialization occurs (as would be the case for a brand
|
||
new system or as a result of a powerup key sequence or
|
||
PE-TEST-POWERUP-KEY-SEQUENCE object request). If only one
|
||
device was initialized (as would be the case if a disk were
|
||
added to an existing system or a formatter were swapped out),
|
||
then only the appropriate collection bits will be returned. If
|
||
there are no collection bits set then this indicates that no
|
||
initialization took place."
|
||
::= { status-system 10 }
|
||
|
||
|
||
self-test OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eNotInASelfTest(1),
|
||
eNonDestructiveSelfTest(4)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Writing this object allows a device self test to be started.
|
||
Reading this object provides an indication what self-test is
|
||
currently executing, if any. Actual self-test operation is
|
||
device specific. A self test may not be allowed at any
|
||
arbitrary time. If the device supports the requested self test,
|
||
but can not start the execution of the self test when
|
||
requested, the device will respond with
|
||
<genErr>. If a non-destructive self
|
||
test is being started, the device will generate a response
|
||
before the self test is completed. RECOMMENDATION: If the
|
||
device is ready (i.e. the NOT-READY-PRINTER object does not
|
||
contain any items, except maybe being off-line) and is idle
|
||
(i.e. the NOT-IDLE object does not contain any items), this
|
||
request should always succeed. This provides a mechanism for
|
||
driver writers to always determine if the action will succeed
|
||
or not.
|
||
Additional information:
|
||
The eNonDestructiveSelfTest performs limited
|
||
testing on the printer and its attached paper handling
|
||
devices. After the self-test is complete a
|
||
configuration page is printed. The recommended
|
||
way to cause a configuration page to be printed is to
|
||
use the PRINT-INTERNAL-PAGE object.
|
||
|
||
Setting this object to eNonDestructiveSelfTest results in a status of <noError>
|
||
and a value of eNonDestructiveSelfTest being returned.
|
||
If the printer is not idle (whether printing an external job or printing
|
||
an internal page), this action will be delayed until the next job boundary.
|
||
|
||
See the PRINT-INTERNAL-PAGE object for more details."
|
||
::= { test 1 }
|
||
|
||
|
||
print-internal-page OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eNotPrintingAnInternalPage(1),
|
||
ePrintingAnUnknownInternalPage(2),
|
||
eDeviceDemoPage1ConfigurationPage(3),
|
||
eDeviceDemoPage2(4),
|
||
eDeviceDemoPage5ErrorLog(7),
|
||
eDeviceDemoPage6FileSystemDirectoryListing(8),
|
||
eDeviceDemoPage7MenuMap(9),
|
||
ePrintUsagePage(100),
|
||
eSuppliesPage(101),
|
||
eDeviceAutoCleaningPage(252),
|
||
eDeviceCleaningPage(253),
|
||
eDevicePaperPathTest(254),
|
||
eDevicePageRegistrationPage(255),
|
||
ePrintQualityPages(256),
|
||
eHighVoltageTestPage(257),
|
||
eColorPaletteRGBPage(258),
|
||
eColorPaletteCMYKPage(259),
|
||
eDevicePageDiagnosticsPage(260),
|
||
ePCLFontList1(350),
|
||
ePSFontList(450)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Writing this object to a value other than
|
||
eNotPrintingAnInternalPage causes the device to attempt to
|
||
print an internally generated page. Reading this object
|
||
provides an indication what internally generated page is
|
||
currently being printed, if any. The actual page is device
|
||
specific. Some devices may support continuously printing an
|
||
internally generated page. Setting this object to
|
||
eNotPrintingAnInternalPage terminates continuously printing
|
||
internally generated pages. An internally generated page may
|
||
not be allowed to be printed at any arbitrary time; under what
|
||
conditions it will succeed or fail is device specific. If the
|
||
device supports the requested page, but can not start printing
|
||
the page when requested, the device will respond with
|
||
<genErr>. RECOMMENDATION: If the
|
||
device is ready (i.e. the NOT-READY-PRINTER object does not
|
||
contain any items, except maybe being off-line) and is idle
|
||
(i.e. the NOT-IDLE object does not contain any items), this
|
||
request should always succeed. This provides a mechanism for
|
||
driver writers to always determine if the action will succeed
|
||
or not.
|
||
Additional information:
|
||
Previous products used
|
||
ePCLDemoPage1ConfigurationPage(300) for the
|
||
Configuration or Self Test page. This product uses
|
||
eDeviceDemoPage1ConfigurationPage(3).
|
||
|
||
$product_str does not support continuously printing a demo page.
|
||
|
||
When this object is set to a valid value, the status returned is <noError>
|
||
and the value returned is ePrintingAnUnknownInternalPage. If the printer
|
||
is idle, the page will be printed immediately. If the printer is
|
||
currently printing another job, the internal page requested will not print
|
||
until that job is finished.
|
||
|
||
Setting this object to a valid value causes the
|
||
desired page to be formatted and put in the printer's
|
||
print queue. While the page is being formatted a get on this object will
|
||
return the value ePrintingAnUnknownInternalPage. Once the page (or pages)
|
||
is finished being formatted, this object returns a value of
|
||
eNotPrintingAnInternalPage, even though the page may not have finished
|
||
being printed.
|
||
|
||
Setting this object multiple times will queue up the requests, but only
|
||
a limited number will be queued. Once the queue is full, additional
|
||
requests will be ignored."
|
||
::= { test 2 }
|
||
|
||
|
||
job-info-accounting-color-usage-log OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eClear(1),
|
||
ePrint(2)
|
||
}
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Provides applications with the ability to clear or print the
|
||
Color Usage Log. eClear - clear the log. ePrint - print the
|
||
log. Either action will complete before any subsequent action
|
||
is performed.
|
||
Additional information:
|
||
Provides applications with the ability to clear or print the
|
||
Color Usage Log. eClear - clear the log. ePrint - print the
|
||
log. Either action will complete before any subsequent action
|
||
is performed."
|
||
::= { job-info-accounting 32 }
|
||
|
||
|
||
|
||
|
||
printed-media-simplex-count OBJECT-TYPE
|
||
SYNTAX INTEGER(0..930576247)
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of simplex pages printed in this media size.
|
||
Additional information:
|
||
The 5 usage (simplex/duplex count, simplex/duplex click
|
||
charge and paper size total) objects described here and
|
||
below detail the usage for the printer for each paper
|
||
size defined in the PCL Implementor's Guide and in the
|
||
Media Size Table in the hpmib.txt. The OID binding is
|
||
based on the click attribute and paper size.
|
||
For example:
|
||
|
||
The format for the OID is as follows:
|
||
|
||
3.4.1.5.x.y
|
||
<-----> | |
|
||
| | \
|
||
/ | paper size
|
||
/ \
|
||
PRINTER-CLICK_TOTALS ROOT \
|
||
OID click attribute 1..5
|
||
|
||
x values are 1..5:
|
||
|
||
1) simplex count
|
||
2) simplex click charge
|
||
3) duplex count
|
||
4) duplex click charge
|
||
5) printer or scanner paper size total (i.e. depends if the
|
||
root OID is referrring to the printer or scanner).
|
||
|
||
y : paper size as defined in the Media Size Table in the
|
||
hpmib.txt "
|
||
::= { printed-media-usage 1 }
|
||
|
||
|
||
printed-media-simplex-charge OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Charge for each simplex page printed in this media size."
|
||
::= { printed-media-usage 2 }
|
||
|
||
|
||
printed-media-duplex-count OBJECT-TYPE
|
||
SYNTAX INTEGER(0..930576247)
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of duplex pages printed in this media size."
|
||
::= { printed-media-usage 3 }
|
||
|
||
|
||
printed-media-duplex-charge OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Charge for each duplex page printed in this media size.
|
||
Additional information:
|
||
The click charges for duplex printed media."
|
||
::= { printed-media-usage 4 }
|
||
|
||
|
||
printed-media-total-charge OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The total charge for pages printed in this media size."
|
||
::= { printed-media-usage 5 }
|
||
|
||
|
||
printed-media-maximum-pixels-per-page OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The number of pixels required to completely fill a page of this
|
||
media size. The device POS will specify the resolution at which
|
||
this pixel count was calculated.
|
||
Additional information:
|
||
The number of pixels required to fill a page of a
|
||
specific media size. The OID binding is the media
|
||
size you to query for. Only media sizes which the
|
||
printer supports will be available."
|
||
::= { printed-media-usage 6 }
|
||
|
||
|
||
printed-media-combined-total OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of letter equivalently weighted pages both color
|
||
and mono combined with this printer.
|
||
Additional information:
|
||
The combined total per page size of simplex and duplex
|
||
color pages plus simplex and duplex mono pages."
|
||
::= { printed-media-usage 7 }
|
||
|
||
|
||
printed-media-dimplex-count OBJECT-TYPE
|
||
SYNTAX INTEGER(0..930576247)
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of mono dimplex pages printed in this media size.
|
||
A dimplex page is one that has been printed in duplex mode but
|
||
the back side is blank. Dimplex pages occur when the printer
|
||
firmware inserts a blank page in order to complete a duplexed
|
||
job which is sent to the printer with an odd number of pages."
|
||
::= { printed-media-usage 10 }
|
||
|
||
|
||
usage-printer-total-charge OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total printer charge for all paper sizes printed."
|
||
::= { printer-accounting 2 }
|
||
|
||
|
||
usage-average-toner-coverage OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Reports the average toner area coverage of all pages printed
|
||
over the life of the device. Counts pixels on each page,
|
||
divides pixel count by pixels possible on a page to give the
|
||
percentage of coverage, and keeps a rolling average percent
|
||
weighted by area printed."
|
||
::= { printer-accounting 3 }
|
||
|
||
|
||
usage-staple-count OBJECT-TYPE
|
||
SYNTAX INTEGER(0..930576247)
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of staples used."
|
||
::= { printer-accounting 4 }
|
||
|
||
|
||
usage-instructions-line1 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..40))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "The first line of usage instructions for the device
|
||
user.Appears on Line 1 of the usage page."
|
||
::= { printer-accounting 5 }
|
||
|
||
|
||
usage-instructions-line2 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..40))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "The second line of usage instructions for the device
|
||
user.Appears on Line 1 of the usage page."
|
||
::= { printer-accounting 6 }
|
||
|
||
|
||
usage-instructions-line3 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..40))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "The third line of usage instructions for the device
|
||
user.Appears on Line 1 of the usage page."
|
||
::= { printer-accounting 7 }
|
||
|
||
|
||
usage-instructions-line4 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..40))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "The fourth line of usage instructions for the device
|
||
user.Appears on Line 1 of the usage page."
|
||
::= { printer-accounting 8 }
|
||
|
||
|
||
printed-modes-usage-total OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION " This object reports the total color and mono print modes usage
|
||
for the life of the printer. This value is reported on the
|
||
usage page."
|
||
::= { printer-accounting 9 }
|
||
|
||
|
||
source-tray-usage-total OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object reports the total source tray usage for the life of
|
||
the printer. This value is reported on the usage page."
|
||
::= { printer-accounting 10 }
|
||
|
||
|
||
destination-bin-usage-total OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object reports the total destination bin usage for the
|
||
life of the printer. This value is reported on the usage page."
|
||
::= { printer-accounting 11 }
|
||
|
||
|
||
usage-printer-mono-total-charge OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total printer charge for all paper sizes printed in monochrome
|
||
only.
|
||
Additional information:
|
||
This is the total charge over the range of all
|
||
supported media sizes for duplex and simplex mono
|
||
pages."
|
||
::= { printer-accounting 12 }
|
||
|
||
|
||
usage-printer-color-total-charge OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total printer charge for all paper sizes printed in color
|
||
only.
|
||
Additional information:
|
||
This is the total charge over the range of all
|
||
supported media sizes for duplex and simplex color
|
||
pages."
|
||
::= { printer-accounting 13 }
|
||
|
||
|
||
printed-media-color-simplex-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of color simplex pages printed in this media
|
||
size."
|
||
::= { printed-media-color-usage 1 }
|
||
|
||
|
||
printed-media-color-duplex-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of color duplex pages printed in this media size."
|
||
::= { printed-media-color-usage 3 }
|
||
|
||
|
||
printed-media-color-total-count OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The total count for color pages printed in this media size."
|
||
::= { printed-media-color-usage 5 }
|
||
|
||
|
||
printed-media-color-dimplex-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of color dimplex pages printed in this media size.
|
||
A color dimplex page is a color page that has been printed in
|
||
duplex mode but the back side is blank. Dimplex pages occur
|
||
when the printer firmware inserts a blank page in order to
|
||
complete a duplexed job which is sent to the printer with an
|
||
odd number of pages."
|
||
::= { printed-media-color-usage 6 }
|
||
|
||
|
||
printed-modes-mono-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of mono pages printed in this fuser mode."
|
||
::= { printed-modes-usage 1 }
|
||
|
||
|
||
printed-modes-color-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of color pages printed in this fuser mode."
|
||
::= { printed-modes-usage 3 }
|
||
|
||
|
||
printed-modes-total-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The total count for pages printed in this fuser mode."
|
||
::= { printed-modes-usage 5 }
|
||
|
||
|
||
source-tray-usage-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of pages printed from this source tray.
|
||
Additional information:
|
||
This object will track how many images have been printed
|
||
with the original source tray as one of the following:
|
||
1. Envelope Feeder
|
||
2. Manual Feed Tray
|
||
3. Tray 1
|
||
4. Tray 2
|
||
5. Tray 3
|
||
6. External Tray
|
||
7. Other"
|
||
::= { source-tray-usage 1 }
|
||
|
||
|
||
destination-bin-usage-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of pages printed to this destination bin.
|
||
Additional information:
|
||
This object will track how many images have been printed
|
||
with the original destination bin as one of the following:
|
||
1. Face Down Bin
|
||
2. Face Up Bin
|
||
3. External Bin
|
||
4. Other"
|
||
::= { destination-bin-usage 1 }
|
||
|
||
|
||
media-size-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The number of impressions printed on sheets of this media size.
|
||
The device POS should state whether this value is lost across a
|
||
power cycle or is kept in permanent storage.
|
||
Additional information:
|
||
The value of this object is persistent across a power cycle.
|
||
|
||
The index for these objects, the last number of the OID, uniquely
|
||
identifies the paper size. This value corresponds to the page sizes listed below.
|
||
These values are also documented in the PCL Implementor's Guide
|
||
and the PML Master MIB.
|
||
|
||
1 US-Executive
|
||
2 US-Letter
|
||
3 US-Legal
|
||
11 eLedger
|
||
15 Statement
|
||
17 ROC 16K
|
||
18 JIS Executive
|
||
19 eROC8K
|
||
25 ISO and JIS A5
|
||
26 ISO and JIS A4
|
||
27 ISO and JIS A3
|
||
45 JIS B5
|
||
46 JIS B4
|
||
65 ISO B5
|
||
72 eJapanesePostcardDouble
|
||
80 Monarch
|
||
81 Commercal-10
|
||
90 International DL
|
||
91 International C5
|
||
100 International B5
|
||
101 Custom
|
||
258 eUSLetterR
|
||
282 ISO JISA4R
|
||
32767 Unknown Paper Size"
|
||
::= { media-size 1 }
|
||
|
||
|
||
printer-average-marking-agent-coverage OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to read the average marking agent coverage
|
||
for a given color plane. It is a real number that represents
|
||
percentage full and will read from 0 to 100%. This object
|
||
obsoletes or replaces USAGE-AVERAGE-TONER-COVERAGE which could
|
||
only be used for black toner coverage information.
|
||
Additional information:
|
||
The average percent of toner coverage for a specific
|
||
color plane. The OID binding is the color plane.
|
||
Only color planes which the printer supports will be
|
||
available. This is only available if a hard disk is
|
||
installed."
|
||
::= { printer-average 1 }
|
||
|
||
|
||
printer-average-marking-agent-coverage-sum OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to read the accumulated sum of the percent
|
||
coverage numbers calculated on a per page basis over the life
|
||
of the printer.
|
||
Additional information:
|
||
The sum of the percent toner coverages for all
|
||
impressions printed. The OID binding is the color
|
||
plane. Only color planes which the printer supports
|
||
will be available."
|
||
::= { printer-average 2 }
|
||
|
||
|
||
printer-average-marking-agent-coverage-sum-squared OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to read the accumulated sum of the squares
|
||
of the percent coverage numbers calculated on a per page basis
|
||
over the life of the printer.
|
||
Additional information:
|
||
The sum of the percent toner coverages squared for
|
||
all impressions printed. The OID binding is the
|
||
color plane. Only color planes which the printer
|
||
supports will be available."
|
||
::= { printer-average 3 }
|
||
|
||
|
||
localization-languages-supported OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The list of languages supported by the device. The languages
|
||
are primarily, but not limited to, two character codes from ISO
|
||
639, each separated by a comma character.
|
||
Additional information:
|
||
This string will always be in the Roman-8 character set.
|
||
See prtLocalizationLanguage for details about each language value."
|
||
::= { status-system 52 }
|
||
|
||
|
||
localization-countries-supported OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The list of countries supported by the device. The countries
|
||
are primarily, but not limited to, two character codes from ISO
|
||
3166, each separated by a comma character.
|
||
Additional information:
|
||
This string will always be in the Roman-8 character set.
|
||
See prtLocalizationCountry for details about each country value."
|
||
::= { status-system 53 }
|
||
|
||
|
||
control-panel-button-press OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eMenuPlusButton(2),
|
||
eMenuMinusButton(3),
|
||
eItemPlusButton(4),
|
||
eItemMinusButton(5),
|
||
eValuePlusButton(6),
|
||
eValueMinusButton(7),
|
||
eSelectButton(8),
|
||
eCancelJobButton(9),
|
||
ePauseResumeButton(10),
|
||
eUpArrowButton(11),
|
||
eDownArrowButton(12),
|
||
eBackButton(13),
|
||
eQuestionMarkButton(14),
|
||
eClearButton(15),
|
||
eNumericButton0(16),
|
||
eNumericButton1(17),
|
||
eNumericButton2(18),
|
||
eNumericButton3(19),
|
||
eNumericButton4(20),
|
||
eNumericButton5(21),
|
||
eNumericButton6(22),
|
||
eNumericButton7(23),
|
||
eNumericButton8(24),
|
||
eNumericButton9(25),
|
||
eRotateButton(26),
|
||
eInfoButton(27),
|
||
eMenuButton(28),
|
||
eStopButton(29)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Writing this object simulates pressing a button on the control
|
||
panel. Reading it will return the last key pressed either on
|
||
the control panel or via PML. The device POS will specify which
|
||
keys are supported.
|
||
Additional information:
|
||
Writing this object simulates pressing a button on the control
|
||
panel. Reading it will return the last key pressed either on
|
||
the control panel or via PML. The device POS will specify which
|
||
keys are supported.
|
||
NOTE:eGoButton(1) has been removed from the enum list.
|
||
Go button is not supported as this is changed to Menu."
|
||
::= { status-system 60 }
|
||
|
||
|
||
control-panel-display-contents-change-counter OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "A counter which increments whenever the contents of the front
|
||
panel display changes. This object is implemented as a 32-bit
|
||
signed integer which rolls over to zero when it reaches a
|
||
maximum value."
|
||
::= { status-system 63 }
|
||
|
||
|
||
control-panel-display-contents-crc OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Reading this object returns a 32-bit Cyclical Redundancy Check
|
||
(CRC) which represents the current contents of the display.
|
||
Additional information:
|
||
This object has been implimented as an 8-bit CRC for
|
||
this product."
|
||
::= { status-system 64 }
|
||
|
||
|
||
control-panel-display-graphical-contents OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Reading this object returns a graphical file format image
|
||
representing the current pixel content of the display. The
|
||
device POS will specify the expected screen resolution, color
|
||
depth of the display and graphics file format for a given
|
||
product (eg. 160x64x1 GIF format OR 640x240x4 JPEG format). If
|
||
the image is large enough that it needs to be returned in
|
||
multiple objects then each array object will contain a portion
|
||
of the image. The image will then need to be reconstructed by a
|
||
host application. An application that needs to determine if
|
||
their is an additional object to be retreived will need to
|
||
perform a GETNEXT operation until there are no more objects in
|
||
the sub-tree.
|
||
Additional information:
|
||
This object returns a GIF image that represents the
|
||
current contents of the 160x64x1 control panel display. Most
|
||
display images require more than one instance of this object
|
||
in order to retreive the complete GIF image."
|
||
::= { control-panel-display 1 }
|
||
|
||
|
||
energy-star OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the Energy Star sleep value. If the value
|
||
is greater than zero, then the device will go into energy
|
||
saving sleep mode after the print engine has been idle for the
|
||
number of seconds specified by this object. A value of zero
|
||
means Energy Star is disabled and the device will not go to
|
||
sleep based on print engine idle time. The value must be
|
||
non-negative.
|
||
Additional information:
|
||
Returns or changes the Energy Star sleep value.
|
||
The device will go into energy saving sleep
|
||
mode after the print engine has been idle for
|
||
the number of seconds specified by this
|
||
object.
|
||
|
||
Laserjet 4700 MFP supports values of 0, 60, 900, 1800,
|
||
2700, 3600, 5400, 7200, 14400 seconds. A value of 0 means
|
||
never enter sleep mode based on the print engine
|
||
idle time. Setting to an unsupported value causes
|
||
the printer to substitute a value (listed
|
||
below) and to return <noError>
|
||
status. Setting this value when the printer is in
|
||
sleep mode will not cause it to wakeup unless it is
|
||
set to 0.
|
||
|
||
The values are as follow:
|
||
<=0 snap to 0
|
||
>=1 and <= 1349 snap to 900 (15 minutes)
|
||
>=1350 and <= 2249 snap to 1800 (30 minutes)
|
||
>=2250 and <= 3149 snap to 2700 (45 minutes)
|
||
>=3150 and <= 4499 snap to 3600 (1 hour)
|
||
>=4500 and <= 6299 snap to 5400 (90 minutes)
|
||
>=6300 and <= 10799 snap to 7200 (2 hours)
|
||
>=10800 snap to 14400 (4 hours)."
|
||
::= { settings-system 1 }
|
||
|
||
|
||
sleep-mode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eFalse(1),
|
||
eTrue(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns eTrue if the device is in energy saving sleep mode,
|
||
otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes
|
||
the device to wake up, if it is in sleep mode. Setting
|
||
SLEEP-MODE to eTrue causes the device to go into sleep mode.
|
||
Additional information:
|
||
This object returns eTrue if the device is in
|
||
energy saving sleep mode, otherwise it returns eFalse.
|
||
Setting this object to eTrue while the printer
|
||
is awake will not change the printer's current state
|
||
and will return <genErr>
|
||
status. NOTE: This object should behave this way
|
||
when the printer does not have an instant-on fuser.
|
||
Setting this object to eTrue while printer is already
|
||
in Sleep Mode will not change the printer's
|
||
current state and will return <noError> status.
|
||
Setting this object to eFalse while printer is already
|
||
awake will not change the printer's current state and
|
||
will return <noError> status.
|
||
Setting this object to eFalse while the printer is
|
||
asleep causes the device to wake up. "
|
||
::= { settings-system 2 }
|
||
|
||
|
||
on-off-line OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOnline(1),
|
||
eOffline(2),
|
||
eOfflineAtEndOfJob(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "To bring the PDL processing sub-system on or off line. If the
|
||
device is a printer, then the printer does not process print
|
||
job data when the printer is off line. PML communication
|
||
persists.
|
||
Additional information:
|
||
When the printer is in the Offline state,
|
||
printing will stop as soon as possible (no more sheets
|
||
of media are pulled from input trays). The I/O
|
||
is taken offline also.
|
||
|
||
Setting to eOnline has the following affect:
|
||
Printer will immediately go to or remain in the Online
|
||
state; <noError> status is returned.
|
||
If the printer's current state
|
||
is Offline with a pending error condition that
|
||
prevents the printer from going to the Online
|
||
state, the printer will remain in the Offline state;
|
||
<genErr> status is returned
|
||
|
||
Setting to eOffline has the following affect:
|
||
Printer will immediately go to or remain in the
|
||
Offline state; <noError> status is returned.
|
||
If pages are being printed, those pages will complete
|
||
with the printer in the Offline state.
|
||
|
||
Setting to eOfflineAtEndOfJob has the following
|
||
affect:
|
||
If not in a job or already in the Offline state, the
|
||
printer will immediately go to or remain in the
|
||
Offline state; <noError> status is returned.
|
||
If in a job and the current state is Online, the
|
||
printer will remain in the Online state, with the
|
||
value of this object as eOfflineAtEndOfJob, until the
|
||
end of the job; <noError> status is returned. At the end of
|
||
the job, the printer goes to the Offline state and the
|
||
value of this object becomes eOffline.
|
||
Setting this object to eOffline or eOnline before the
|
||
end of the job causes the action for that value to be
|
||
taken immediately."
|
||
::= { status-system 5 }
|
||
|
||
|
||
continue OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eInitiateAction(1),
|
||
eRetry(2),
|
||
eRetryAndCheck(3),
|
||
eUseLoadedMedia(4),
|
||
eEjectAndWait(5),
|
||
eSelectMediaSize(6)
|
||
}
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "A device can support a class of errors called continuable
|
||
errors. When a continuable error is encountered, the device
|
||
requires a continue event to occur before the device will
|
||
continue operation. One continue event is setting the CONTINUE
|
||
object to eInitiateAction. Devices can support other continue
|
||
events, like auto-continue. A continue event causes the
|
||
continuable error to be acknowledged, thus allowing the device
|
||
to continue. Each device needs to list the continuable errors.
|
||
If the device doesn't currently have an unacknowledged
|
||
continuable error, the response will contain
|
||
<genErr>.
|
||
Additional information:
|
||
See the CLEARABLE-WARNING and AUTO-CONTINUE objects for the
|
||
errors that this object will clear."
|
||
::= { status-system 6 }
|
||
|
||
|
||
auto-continue OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eOn(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Indicates if the device will automatically continue after
|
||
encountering a continuable error. If AUTO-CONTINUE is set to
|
||
eOn, the device will automatically generate continue event to
|
||
acknowledge continuable errors. If AUTO-CONTINUE is set to
|
||
eOff, then some other continue event will have to acknowledge
|
||
the continuable error.
|
||
Additional information:
|
||
If this is set to eOn the device displays an
|
||
error message and goes offline for ten seconds. After ten seconds the
|
||
printer automatically returns to the online state.
|
||
|
||
If this is set to eOff then the device displays an error message and
|
||
goes offline. It remains offline until the operator presses the GO key or
|
||
until the CONTINUE object is set.
|
||
|
||
If the printer is not idle, the new value may not take effect
|
||
until a job boundary is reached. If a get is done on this object before
|
||
the job boundary is reached, the value last set will be returned."
|
||
::= { status-system 7 }
|
||
|
||
|
||
simm1-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9),
|
||
eVolatileRAMOnBoardMemory(18)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in SIMM
|
||
slot 1.
|
||
eEmpty means the device did not detect any option installed
|
||
in the interface slot.
|
||
eUnknown means the device doesn't recognize the installed
|
||
option.
|
||
eUnSupported means the device recognizes the installed
|
||
option, but does not support the option.
|
||
eReadOnlyMemory means the installed option contains ROM
|
||
Ics.
|
||
eVolatileRandomAccessMemory means the installed option
|
||
contains RAM ICs that loose data when the power is
|
||
turned off.
|
||
eNonVolatileRandomAccessMemory means that the installed
|
||
option contains RAM ICs that do not loose data when the
|
||
power is turned off.
|
||
eFlashMemory means that the installed option contains a
|
||
type of non-volatile RAM that needs to be erased before
|
||
it can be written.
|
||
eDiskDrive means the installed option contains a disk
|
||
drive.
|
||
eRamRom means the installed option contains both volatile
|
||
random access memory and read only memory.
|
||
eInputPHD means the installed option is an input paper
|
||
handling device.
|
||
eOutputPHD means the installed option is an output paper
|
||
handling device. eIOCard means the installed option is
|
||
an I/O card.
|
||
eVolatileRAMOnBoardMemory means the installed option
|
||
contains on board RAM ICs that loose data when the
|
||
power is turned off.
|
||
Additional information:
|
||
This object is used for describing DIMMs instead
|
||
of SIMMs on $product_str. eRamRom is used to denote $product_str's combo simm."
|
||
::= { simm1 4 }
|
||
|
||
|
||
simm1-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of the SIMM installed in
|
||
SIMM slot 1. The capacity is dependent on the type of option,
|
||
as indicated by the SIMM1-TYPE object. This object has no
|
||
meaning if the installed option type is eUnknown or
|
||
eReadOnlyMemory. This object contains the size, in bytes, if
|
||
the installed option type is eVolatileRandomAccessMemory,
|
||
eNonVolatileRandomAccessMemory, eFlashMemory, or eDiskDrive. If
|
||
the type of the installed option is eRamRom, this object
|
||
contains the size, in bytes, of the random access memory. If
|
||
the type of the installed option is eInputPHD, the capacity
|
||
indicates the number of input trays supported by the installed
|
||
option. If the type of the installed option is eOutputPHD, the
|
||
capacity indicates the number of output bins supported by the
|
||
installed option. If the type of the installed option is
|
||
eIOCard, the capacity indicates the number of logical I/O ports
|
||
supported by the I/O card.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed option in bytes. This object is not
|
||
supported unless the SIMM1-TYPE type is
|
||
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
||
For eRamRom only the size of the Ram portion of the SIMM
|
||
is returned."
|
||
::= { simm1 5 }
|
||
|
||
|
||
simm1-bank1-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 1
|
||
of SIMM slot 1. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm1-bank1 1 }
|
||
|
||
|
||
simm1-bank1-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 1 of the SIMM
|
||
installed in SIMM slot 1. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM1-BANK1-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm1-bank1 2 }
|
||
|
||
|
||
simm1-bank2-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 2
|
||
of SIMM slot 1. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm1-bank2 1 }
|
||
|
||
|
||
simm1-bank2-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 2 of the SIMM
|
||
installed in SIMM slot 1. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM1-BANK2-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm1-bank2 2 }
|
||
|
||
|
||
simm2-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in SIMM
|
||
slot 2. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing DIMMs instead
|
||
of SIMMs on $product_str. eRamRom is used to denote $product_str's combo simm."
|
||
::= { simm2 4 }
|
||
|
||
|
||
simm2-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of the SIMM installed in
|
||
SIMM slot 2. See SIMM1-CAPACITY for a description.
|
||
Additional information:
|
||
This object is used for describing DIMMs instead
|
||
of SIMMs on $product_str. Returns an indication of the capacity of the
|
||
installed option in bytes. This object is not
|
||
supported unless the SIMM2-TYPE type is
|
||
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
||
For eRamRom only the size of the Ram portion of the
|
||
SIMM is returned."
|
||
::= { simm2 5 }
|
||
|
||
|
||
simm2-bank1-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 1
|
||
of SIMM slot 2. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm2-bank1 1 }
|
||
|
||
|
||
simm2-bank1-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 1 of the SIMM
|
||
installed in SIMM slot 2. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM2-BANK1-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm2-bank1 2 }
|
||
|
||
|
||
simm2-bank2-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 2
|
||
of SIMM slot 2. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm2-bank2 1 }
|
||
|
||
|
||
simm2-bank2-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 2 of the SIMM
|
||
installed in SIMM slot 2. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM2-BANK2-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm2-bank2 2 }
|
||
|
||
|
||
simm3-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in SIMM
|
||
slot 3. See SIMM1-TYPE for a description."
|
||
::= { simm3 4 }
|
||
|
||
|
||
simm3-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of the SIMM installed in
|
||
SIMM slot 3. See SIMM1-CAPACITY for a description.
|
||
Additional information:
|
||
This object is used for describing DIMMs instead
|
||
of SIMMs on $product_str. Returns an indication of the capacity of the
|
||
installed option in bytes. This object is not
|
||
supported unless the SIMM3-TYPE type is
|
||
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
||
For eRamRom only the size of the Ram portion of the
|
||
simm is returned."
|
||
::= { simm3 5 }
|
||
|
||
|
||
simm3-bank1-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 1
|
||
of SIMM slot 3. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm3-bank1 1 }
|
||
|
||
|
||
simm3-bank1-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 1 of the SIMM
|
||
installed in SIMM slot 3. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM3-BANK1-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm3-bank1 2 }
|
||
|
||
|
||
simm3-bank2-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 2
|
||
of SIMM slot 3. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm3-bank2 1 }
|
||
|
||
|
||
simm3-bank2-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 2 of the SIMM
|
||
installed in SIMM slot 3. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM3-BANK2-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm3-bank2 2 }
|
||
|
||
|
||
simm4-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in SIMM
|
||
slot 4. See SIMM1-TYPE for a description."
|
||
::= { simm4 4 }
|
||
|
||
|
||
simm4-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of the SIMM installed in
|
||
SIMM slot 4. See SIMM1-CAPACITY for a description.
|
||
Additional information:
|
||
This object is used for describing DIMMs instead
|
||
of SIMMs on $product_str. Returns an indication of the capacity of the
|
||
installed option in bytes. This object is not
|
||
supported unless the SIMM4-TYPE type is
|
||
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
||
For eRamRom only the size of the Ram portion of the
|
||
simm is returned."
|
||
::= { simm4 5 }
|
||
|
||
|
||
simm4-bank1-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 1
|
||
of SIMM slot 4. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm4-bank1 1 }
|
||
|
||
|
||
simm4-bank1-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 1 of the SIMM
|
||
installed in SIMM slot 4. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM4-BANK1-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm4-bank1 2 }
|
||
|
||
|
||
simm4-bank2-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 2
|
||
of SIMM slot 4. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm4-bank2 1 }
|
||
|
||
|
||
simm4-bank2-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 2 of the SIMM
|
||
installed in SIMM slot 4. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM4-BANK2-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm4-bank2 2 }
|
||
|
||
|
||
simm5-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in SIMM
|
||
slot 5. See SIMM1-TYPE for a description."
|
||
::= { simm5 4 }
|
||
|
||
|
||
simm5-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of the SIMM installed in
|
||
SIMM slot 5. See SIMM1-CAPACITY for a description.
|
||
Additional information:
|
||
This object is used for describing DIMMs instead
|
||
of SIMMs on $product_str. Returns an indication of the capacity of the
|
||
installed option in bytes. This object is not
|
||
supported unless the SIMM5-TYPE type is
|
||
eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
|
||
For eRamRom only the size of the Ram portion of the
|
||
simm is returned."
|
||
::= { simm5 5 }
|
||
|
||
|
||
simm5-bank1-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 1
|
||
of SIMM slot 5. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm5-bank1 1 }
|
||
|
||
|
||
simm5-bank1-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 1 of the SIMM
|
||
installed in SIMM slot 5. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM5-BANK1-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm5-bank1 2 }
|
||
|
||
|
||
simm5-bank2-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eUnSupported(3),
|
||
eReadOnlyMemory(4),
|
||
eVolatileRandomAccessMemory(5),
|
||
eFlashMemory(7),
|
||
eRamRom(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in Bank 2
|
||
of SIMM slot 5. See SIMM1-TYPE for a description.
|
||
Additional information:
|
||
This object is used for describing the type
|
||
of DIMM banks. Each physical DIMM slot has up to 2 banks."
|
||
::= { simm5-bank2 1 }
|
||
|
||
|
||
simm5-bank2-capacity OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the capacity of Bank 2 of the SIMM
|
||
installed in SIMM slot 5. See SIMM1-CAPACITY for a
|
||
description.
|
||
Additional information:
|
||
Returns an indication of the capacity of the
|
||
installed bank option in bytes. This object is not
|
||
supported unless the SIMM5-BANK2-TYPE type is
|
||
eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
|
||
eSDRandomAccessMemory, eSRandomAccessMemory,
|
||
or eFPMRandomAccessMemory."
|
||
::= { simm5-bank2 2 }
|
||
|
||
|
||
cancel-job OBJECT-TYPE
|
||
SYNTAX INTEGER(-1..32767)
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Cancels the print job whose ID matches the value written to the
|
||
CANCEL-JOB object. The host first learns the job ID using the
|
||
CURRENT-JOB-PARSING-ID command. If the printer has completely
|
||
processed the job, the printer responds with
|
||
<badValue>. If the value of the
|
||
CURRENT-JOB-PARSING-ID is smaller than the value written to the
|
||
CANCEL-JOB object, then the printer responds with
|
||
<badValue>. When read, returns the value
|
||
of the last job ID what was canceled, or -1 to indicate no job
|
||
has been canceled.
|
||
Additional information:
|
||
If the value written matches the ID of a job that is
|
||
currently being canceled (for any reason),
|
||
the printer responds with <noError>.
|
||
It uses job ID's in the range of -1..32767.
|
||
Because the ID number can wrap to zero,
|
||
CURRENT-JOB-PARSING-ID may be smaller than the value
|
||
written to this object; when this occurs, no error
|
||
will result as long as the ID is for a currently
|
||
processing job. This object is write only, so the
|
||
comment in the general description stating the
|
||
job ID will be returned on a read does not
|
||
apply. A -1 represents the current job"
|
||
::= { settings-job 2 }
|
||
|
||
|
||
os-execute-file OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "This object's input is a null-terminated string representing a
|
||
fully-qualified path name for an executable file. This object
|
||
causes the file to be executed by the OS.
|
||
Additional information:
|
||
This object's input is a null-terminated string of two or
|
||
more whitespace-separated tokens. The first token is a path
|
||
to a directory to make the current working directory. The
|
||
second token is a path to an executable file to be executed.
|
||
Any remaining whitespace-separated tokens are optional and
|
||
will be passed as parameters to the executable. The paths
|
||
to the directory and executable can be either PJL style
|
||
(e.g., 1:\app\example) or UNIX-style (e.g.,
|
||
/hpmnt/dsk_ide1a/app/example). The executable is run in
|
||
a separate process."
|
||
::= { operating-system 1 }
|
||
|
||
|
||
form-feed OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eInitiateAction(1)
|
||
}
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Instructs the PDL processing sub-system to finishing processing
|
||
the current page of the current job. Form feed is also known as
|
||
close page or eject page. If the PDL processing sub-system is
|
||
in a FORM-FEED-NEEDED state, this causes the device to flush or
|
||
finish processing the current page of the current job. If the
|
||
device is not in the FORM-FEED-NEEDED state, an
|
||
<genErr> will occur."
|
||
::= { settings-pdl 5 }
|
||
|
||
|
||
form-feed-needed OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eFalse(1),
|
||
eTrue(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates if the PDL processing sub-system has made marks on
|
||
the current page and the source subsystem has been idle for a
|
||
device specific amount of time.
|
||
Additional information:
|
||
$product_str will set this object to eTrue when it
|
||
has made marks on the current page, the IO-TIMEOUT has
|
||
expired while PCL was running in `backward-compatibility
|
||
mode' (which is caused by jobs consisting purely of PCL
|
||
data with no prepended PJL commands), and no data is pending
|
||
on another I/O. Once it is set to eTrue, more data on the
|
||
same I/O will cause this object to be set to eFalse, until
|
||
the above conditions are met again."
|
||
::= { status-pdl 2 }
|
||
|
||
|
||
background-status-msg-line1-part1 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..16))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "The string displayed on the device's front panel in place of
|
||
the printer's built-in background status string. An example
|
||
built-in background status string is '00 READY'.
|
||
Additional information:
|
||
The display size for the $product_str printers is 2 X 16.
|
||
The value of this object and the current value of
|
||
BACKGROUND-STATUS-MSG-LINE2-PART1 are displayed
|
||
together on the 2-line display, but they must
|
||
be set independently. If line 2 has been set, and the
|
||
next message to be displayed only requires line 1,
|
||
BACKGROUND-STATUS-MSG-LINE2-PART1 must be set to the
|
||
null string to clear it.
|
||
This object allows a message to be displayed when
|
||
it is the highest priority message. Setting this
|
||
object does not guarantee the message will be
|
||
displayed; and reading it returns the value last
|
||
written, not the currently displayed message (use
|
||
prtConsoleDisplayBufferText to read the
|
||
display).
|
||
The priority assigned for displaying this message
|
||
is one lower than the READY message. In other words,
|
||
the only message that can be replaced by these
|
||
objects is the READY message.
|
||
To clear the message, write a null string to both
|
||
this object and BACKGROUND-STATUS-MSG-LINE2-PART1."
|
||
::= { background-message1 1 }
|
||
|
||
|
||
background-status-msg-line2-part1 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..16))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "The string displayed on the device's front panel in place of
|
||
the printer's built-in background status string. An example
|
||
built-in background status string is '00 READY'.
|
||
Additional information:
|
||
See BACKGROUND-STATUS-MSG-LINE1-PART1"
|
||
::= { background-message2 1 }
|
||
|
||
|
||
|
||
error-log-clear OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eClearErrorLog(1)
|
||
}
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Setting this object clears all the entries in the error log
|
||
sub-tree.
|
||
Additional information:
|
||
Setting this object removes all errors that have been
|
||
stored in the printer's non-volatile memory."
|
||
::= { status-system 38 }
|
||
|
||
|
||
clearable-warning OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOn(2),
|
||
eJob(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or controls how the device will track clearable
|
||
warnings. A clearable warning indicates a transient event in
|
||
the device. The device will continue after the transient event
|
||
occurs. If CLEARABLE-WARNING is eOff, the device does not track
|
||
clearable warnings. If CLEARABLE-WARNING is eOn, all clearable
|
||
warnings will be tracked until cleared (acknowledged). If
|
||
CLEARABLE-WARNING is eJob, a clearable warning generated due to
|
||
an event that occurs because of the print job being processed
|
||
will be automatically cleared when the device has finished
|
||
processing the job. Example clearable warning events include
|
||
the device altering resolution or page protection due to memory
|
||
constraints. The POS will document what transient events are
|
||
treated as clearable warnings.
|
||
Additional information:
|
||
If set to eOn, the warning is displayed until the GO key
|
||
is pressed or the CONTINUE object is set.
|
||
|
||
If set to eJob, the warning is displayed until the end of the job in which
|
||
it was generated."
|
||
::= { settings-job 1 }
|
||
|
||
|
||
error1-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 1
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
This item contains the engine
|
||
page count when the error occurred.
|
||
|
||
If there is currently no error entry for this object, a '0' will be returned.
|
||
Note that '0' may also be returned when there is a valid error, but a current
|
||
page count was unavailable. If ERROR1-CODE object also returns '0', then
|
||
an error has not yet been logged for this object.
|
||
|
||
See ERROR1-CODE for an explanation of the order used for storing errors."
|
||
::= { error1 1 }
|
||
|
||
|
||
error1-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
Returns a device specific error code.
|
||
If the error code returned is '0', then the printer has not yet logged an
|
||
error for this object.
|
||
When the maximum number of errors is reached (30 on LeserJet printers), and
|
||
a new error occurs, the error in ERROR1-CODE will be replaced by the
|
||
one in ERROR2-CODE, and so on until the last error object will be given
|
||
the value of the new error.
|
||
|
||
The error number is returned in the upper 16 bits.
|
||
If it is 68, 69, 79, or 80, then the sub code is returned in the lower
|
||
16 bits (eg. 68 001C, where the subcode is already a hexadecimal value).
|
||
If the error number is any other number, then the 1st sub code (XX)
|
||
will be in bits 15-8 and the 2nd sub code (YY) will be in bits 7-0 (eg.
|
||
55.04.02) where XX=04 and YY=02).
|
||
|
||
|
||
Example: If the error is 68 001A, then the value returned will be 4456474.
|
||
To break it down: 4456474 = 0x0044001A
|
||
The upper 16 bits: 0x0044 = 68
|
||
The lower 16 bits: 0x001A = 001A
|
||
Which is the error: 68 001A
|
||
|
||
Example: If the error is 55.04.241, then the error code will be 3605745.
|
||
To break it down: 3605745 = 0x003704F1
|
||
The upper 16 bits: 0x0037 = 55
|
||
The upper byte of the lower 16 bits: 0x04 = 04
|
||
The lower byte of the lower 16 bits: 0xF1 = 241
|
||
Which is the error: 55.04.241"
|
||
::= { error1 2 }
|
||
|
||
|
||
error1-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
This item contains the date and
|
||
the time when the error occurred.
|
||
|
||
It returns the date and the time at which the error occured in hexadecimal.
|
||
For instance, if date is 2004-Jul-13 and time is 03:15 am
|
||
when the error was logged, then we get 04 07 0d 03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month 07
|
||
0d(hex) - corresponds to date 13
|
||
03(hex) - corresponds to hour- 03
|
||
0f(hex) - corresponds to min- 15.
|
||
|
||
If there is currently no error entry , '00 00 00 00 00' will be returned.
|
||
See ERROR1-CODE for an explanation of the order used for storing errors."
|
||
::= { error1 3 }
|
||
|
||
|
||
error2-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 2
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error2 1 }
|
||
|
||
|
||
error2-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error2 2 }
|
||
|
||
|
||
error2-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error2 3 }
|
||
|
||
|
||
error3-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 3
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error3 1 }
|
||
|
||
|
||
error3-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error3 2 }
|
||
|
||
|
||
error3-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error3 3 }
|
||
|
||
|
||
error4-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 4
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error4 1 }
|
||
|
||
|
||
error4-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error4 2 }
|
||
|
||
|
||
error4-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error4 3 }
|
||
|
||
|
||
error5-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 5
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error5 1 }
|
||
|
||
|
||
error5-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error5 2 }
|
||
|
||
|
||
error5-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error5 3 }
|
||
|
||
|
||
error6-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 6
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error6 1 }
|
||
|
||
|
||
error6-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error6 2 }
|
||
|
||
|
||
error6-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error6 3 }
|
||
|
||
|
||
error7-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 7
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error7 1 }
|
||
|
||
|
||
error7-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error7 2 }
|
||
|
||
|
||
error7-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error7 3 }
|
||
|
||
|
||
error8-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 8
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error8 1 }
|
||
|
||
|
||
error8-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error8 2 }
|
||
|
||
|
||
error8-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error8 3 }
|
||
|
||
|
||
error9-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 9
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error9 1 }
|
||
|
||
|
||
error9-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error9 2 }
|
||
|
||
|
||
error9-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error9 3 }
|
||
|
||
|
||
error10-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 10
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error10 1 }
|
||
|
||
|
||
error10-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error10 2 }
|
||
|
||
|
||
error10-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error10 3 }
|
||
|
||
|
||
error11-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 11
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error11 1 }
|
||
|
||
|
||
error11-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error11 2 }
|
||
|
||
|
||
error11-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error11 3 }
|
||
|
||
|
||
error12-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 12
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error12 1 }
|
||
|
||
|
||
error12-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error12 2 }
|
||
|
||
|
||
error12-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error12 3 }
|
||
|
||
|
||
error13-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 13
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error13 1 }
|
||
|
||
|
||
error13-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error13 2 }
|
||
|
||
|
||
error13-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error13 3 }
|
||
|
||
|
||
error14-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 14
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error14 1 }
|
||
|
||
|
||
error14-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error14 2 }
|
||
|
||
|
||
error14-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error14 3 }
|
||
|
||
|
||
error15-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 15
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error15 1 }
|
||
|
||
|
||
error15-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error15 2 }
|
||
|
||
|
||
error15-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error15 3 }
|
||
|
||
|
||
error16-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 16
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error16 1 }
|
||
|
||
|
||
error16-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error16 2 }
|
||
|
||
|
||
error16-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error16 3 }
|
||
|
||
|
||
error17-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 17
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error17 1 }
|
||
|
||
|
||
error17-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error17 2 }
|
||
|
||
|
||
error17-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error17 3 }
|
||
|
||
|
||
error18-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 18
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error18 1 }
|
||
|
||
|
||
error18-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error18 2 }
|
||
|
||
|
||
error18-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error18 3 }
|
||
|
||
|
||
error19-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 19
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error19 1 }
|
||
|
||
|
||
error19-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error19 2 }
|
||
|
||
|
||
error19-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error19 3 }
|
||
|
||
|
||
error20-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 20
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error20 1 }
|
||
|
||
|
||
error20-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error20 2 }
|
||
|
||
|
||
error20-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error20 3 }
|
||
|
||
|
||
error21-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 21
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error21 1 }
|
||
|
||
|
||
error21-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error21 2 }
|
||
|
||
|
||
error21-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error21 3 }
|
||
|
||
|
||
error22-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 22
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error22 1 }
|
||
|
||
|
||
error22-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error22 2 }
|
||
|
||
|
||
error22-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error22 3 }
|
||
|
||
|
||
error23-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 23
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error23 1 }
|
||
|
||
|
||
error23-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error23 2 }
|
||
|
||
|
||
error23-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error23 3 }
|
||
|
||
|
||
error24-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 24
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error24 1 }
|
||
|
||
|
||
error24-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error24 2 }
|
||
|
||
|
||
error24-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error24 3 }
|
||
|
||
|
||
error25-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 25
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error25 1 }
|
||
|
||
|
||
error25-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error25 2 }
|
||
|
||
|
||
error25-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error25 3 }
|
||
|
||
|
||
error26-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 26
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error26 1 }
|
||
|
||
|
||
error26-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error26 2 }
|
||
|
||
|
||
error26-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error26 3 }
|
||
|
||
|
||
error27-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 27
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error27 1 }
|
||
|
||
|
||
error27-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error27 2 }
|
||
|
||
|
||
error27-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error27 3 }
|
||
|
||
|
||
error28-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 28
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error28 1 }
|
||
|
||
|
||
error28-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error28 2 }
|
||
|
||
|
||
error28-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error28 3 }
|
||
|
||
|
||
error29-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 29
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error29 1 }
|
||
|
||
|
||
error29-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error29 2 }
|
||
|
||
|
||
error29-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error29 3 }
|
||
|
||
|
||
error30-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 30
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error30 1 }
|
||
|
||
|
||
error30-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error30 2 }
|
||
|
||
|
||
error30-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error30 3 }
|
||
|
||
|
||
error31-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 31
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error31 1 }
|
||
|
||
|
||
error31-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error31 2 }
|
||
|
||
|
||
error31-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error31 3 }
|
||
|
||
|
||
error32-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 32
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error32 1 }
|
||
|
||
|
||
error32-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error32 2 }
|
||
|
||
|
||
error32-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error32 3 }
|
||
|
||
|
||
error33-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 33
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error33 1 }
|
||
|
||
|
||
error33-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error33 2 }
|
||
|
||
|
||
error33-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error33 3 }
|
||
|
||
|
||
error34-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 34
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error34 1 }
|
||
|
||
|
||
error34-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error34 2 }
|
||
|
||
|
||
error34-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error34 3 }
|
||
|
||
|
||
error35-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 35
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error35 1 }
|
||
|
||
|
||
error35-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error35 2 }
|
||
|
||
|
||
error35-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error35 3 }
|
||
|
||
|
||
error36-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 36
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error36 1 }
|
||
|
||
|
||
error36-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error36 2 }
|
||
|
||
|
||
error36-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error36 3 }
|
||
|
||
|
||
error37-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 37
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error37 1 }
|
||
|
||
|
||
error37-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error37 2 }
|
||
|
||
|
||
error37-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error37 3 }
|
||
|
||
|
||
error38-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 38
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error38 1 }
|
||
|
||
|
||
error38-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error38 2 }
|
||
|
||
|
||
error38-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error38 3 }
|
||
|
||
|
||
error39-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 39
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error39 1 }
|
||
|
||
|
||
error39-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error39 2 }
|
||
|
||
|
||
error39-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error39 3 }
|
||
|
||
|
||
error40-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 40
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error40 1 }
|
||
|
||
|
||
error40-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error40 2 }
|
||
|
||
|
||
error40-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error40 3 }
|
||
|
||
|
||
error41-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 41
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error41 1 }
|
||
|
||
|
||
error41-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error41 2 }
|
||
|
||
|
||
error41-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error41 3 }
|
||
|
||
|
||
error42-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 42
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error42 1 }
|
||
|
||
|
||
error42-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error42 2 }
|
||
|
||
|
||
error42-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error42 3 }
|
||
|
||
|
||
error43-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 43
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error43 1 }
|
||
|
||
|
||
error43-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error43 2 }
|
||
|
||
|
||
error43-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error43 3 }
|
||
|
||
|
||
error44-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 44
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error44 1 }
|
||
|
||
|
||
error44-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error44 2 }
|
||
|
||
|
||
error44-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error44 3 }
|
||
|
||
|
||
error45-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 45
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error45 1 }
|
||
|
||
|
||
error45-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error45 2 }
|
||
|
||
|
||
error45-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error45 3 }
|
||
|
||
|
||
error46-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 46
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error46 1 }
|
||
|
||
|
||
error46-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error46 2 }
|
||
|
||
|
||
error46-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error46 3 }
|
||
|
||
|
||
error47-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 47
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error47 1 }
|
||
|
||
|
||
error47-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error47 2 }
|
||
|
||
|
||
error47-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error47 3 }
|
||
|
||
|
||
error48-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 48
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error48 1 }
|
||
|
||
|
||
error48-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error48 2 }
|
||
|
||
|
||
error48-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error48 3 }
|
||
|
||
|
||
error49-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 49
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error49 1 }
|
||
|
||
|
||
error49-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error49 2 }
|
||
|
||
|
||
error49-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error49 3 }
|
||
|
||
|
||
error50-time-stamp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains some sort of time stamp indicating when error 50
|
||
occurred. Example time stamps include the actual time the error
|
||
occurred (in seconds since Jan. 1, 1970), and the total engine
|
||
page count. The device POS documents the meaning of the time
|
||
stamp.
|
||
Additional information:
|
||
See ERROR1-TIME-STAMP."
|
||
::= { error50 1 }
|
||
|
||
|
||
error50-code OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains a device specific error code. Each device POS should
|
||
list what errors are logged to the error log and the meaning of
|
||
each supported error code value.
|
||
Additional information:
|
||
See ERROR1-CODE."
|
||
::= { error50 2 }
|
||
|
||
|
||
error50-date-time OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This item contains the date and the time at which an error
|
||
occurred. The values returned will be in hexadecimal. If the
|
||
date is 2004-Jul-13 and the time is 03:15 a.m., we get 04 07 0d
|
||
03 0f where,
|
||
04 (hex) - corresponds to the year 2004.
|
||
07 (hex) - corresponds to month, 07
|
||
0d (hex) - corresponds to date, 13
|
||
03 (hex) - corresponds to hour, 3 a.m.
|
||
0f (hex) - corresponds to min, 15.
|
||
Additional information:
|
||
See ERROR1-DATE-TIME."
|
||
::= { error50 3 }
|
||
|
||
|
||
channelprinteralert OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Identifies the values of prtAlertIndex, prtAlertSeverityLevel,
|
||
prtAlertGroup, prtAlertGroupIndex, prtAlertLocation, and
|
||
prtAlertCode for the latest critical evnet in the
|
||
prtAlertTable. The binary string is defined as following:
|
||
<table>
|
||
-----------------------------------------------------
|
||
Field | Filed | Description
|
||
Offset | Length |
|
||
-----------------------------------------------------
|
||
0 | 4 | the value of prtAlertIndex
|
||
4 | 4 | the value of prtAlertSeverityLevel
|
||
8 | 4 | the value of prtAlertGroup
|
||
12 | 4 | the value of prtAlertGroupIndex
|
||
16 | 4 | the value of prtAlertLocation
|
||
20 | 4 | the value of prtAlertCode
|
||
------------------------------------------------------
|
||
</table>
|
||
|
||
Each field is in Big Endian style.
|
||
Additional information:
|
||
This object is used to pass alert information from the
|
||
peripheral to the IIO card. The standard printer MIB
|
||
contains the following description:
|
||
|
||
printerAlert TRAP-TYPE
|
||
ENTERPRISE printerV1Alert
|
||
VARIABLES { prtAlertIndex, prtAlertSeverityLevel, prtAlertGroup,
|
||
prtAlertGroupIndex, prtAlertLocation, prtAlertCode }
|
||
DESCRIPTION
|
||
'This trap is sent whenever a critical event is added to the
|
||
prtAlertTable.'
|
||
|
||
In order to provide this information in the trap packet, the
|
||
IIO card enables traps on channelPrinterAlert. When a critical
|
||
alert is generated the peripheral fills the appropriate value
|
||
into this object and sends it to the card.
|
||
This object is a structure which contains 24 bytes of data.
|
||
The structure is:
|
||
|
||
struct structAlertInfo {
|
||
sint32 prtAlertIndex;
|
||
sint32 prtAlertSeverityLevel;
|
||
sint32 prtAlertGroup;
|
||
sint32 prtAlertGroupIndex;
|
||
sint32 prtAlertLocation;
|
||
sint32 prtAlertCode;
|
||
} thisAlertData;"
|
||
::= { channel 2 }
|
||
|
||
|
||
|
||
|
||
pages-remaining OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eOn(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Used to enable/disable the number of pages remaining with the
|
||
supply that is shown on control panel messages and supplies
|
||
status menu.
|
||
Additional information:
|
||
The PAGES-REMAINING would allow the user to turn off/on
|
||
'PAGES REMAINING' part of the 'ORDER <COLOR> CARTRIDGE
|
||
LESS THAN X PAGES REMAINING ' messages"
|
||
::= { settings-system 70 }
|
||
|
||
|
||
order-cartridge OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eOn(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Used to enable/disable the supplies status message that is
|
||
shown when the supply reaches low.
|
||
Additional information:
|
||
This will allow the user to turn off/on 'ORDER <COLOR>
|
||
CARTRIDGE LESS THAN X PAGES REMAINING ' messages"
|
||
::= { settings-system 71 }
|
||
|
||
|
||
level-display OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eOn(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Used to enable/disable the supplies level indicators that is
|
||
displayed on the control panel.
|
||
Additional information:
|
||
This will allow the user to turn off/on
|
||
BAR GRAPHS on the control panel"
|
||
::= { settings-system 72 }
|
||
|
||
|
||
install-date OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(13))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Identifies the date that the device was installed. The format
|
||
of the string is 'YYYYMMDDHHmmZ'. Where:
|
||
YYYY is the year.
|
||
MM is the month (1-12).
|
||
DD is the day (1-31).
|
||
HH is the hour of the day (0-23).
|
||
mm are the minutes (0-59).
|
||
'Z' designates Greenwich Mean Time; if 'Z' not specified,
|
||
value is local time.
|
||
Device POS must specify the conditions for setting this
|
||
object.
|
||
Additional information:
|
||
Setting the <<hidden>> object will
|
||
enable setting this object."
|
||
::= { status-system 8 }
|
||
|
||
|
||
service-id OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(5))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "A read of this object will return the current SERVICE ID value
|
||
in the printer. The format is 'YYDDD' where:
|
||
YY = calendar year - 1990
|
||
DDD = (calendar month - 1) * 30 + (calendar day of the
|
||
month or 30, if > 30)
|
||
A write of this object will only succeed if the
|
||
MANUFACTURING-CONTROL PML object has been set with the correct
|
||
<<hidden>>. If the write operation is not allowed, this object
|
||
will return an <genErr> status.
|
||
Additional information:
|
||
Setting the <<hidden>> object will
|
||
enable setting this object."
|
||
::= { status-system 19 }
|
||
|
||
|
||
show-address OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eAuto(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "If this object is set to eAuto, and the device has an IP
|
||
address, the IP address of the device will be shown with the
|
||
READY message. If this object is set to eOff, the IP address
|
||
will not be shown."
|
||
::= { display-status 3 }
|
||
|
||
|
||
serial-number OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..10))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Identifies the serial number for the device. If the
|
||
SERIAL-NUMBER object is set by the user, then setting the
|
||
object does not need to be protected. If the SERIAL-NUMBER
|
||
object is set at the factory, then the <<hidden>> object
|
||
must be set correctly before the SERIAL-NUMBER object is
|
||
writable. If this is a writable object, the POS should indicate
|
||
the maximum supported string length. If possible, encode the
|
||
serial number in a symbol set (like Roman-8) that matches the
|
||
ASCII character set and limit the characters used to ASCII
|
||
characters.
|
||
Additional information:
|
||
This value IS AFFECTED BY NVRAM resets, it is set to the
|
||
default value of XXXXXXXXXX, when a NVRAM init is done."
|
||
::= { id 3 }
|
||
|
||
|
||
fw-rom-datecode OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Identifies the base system firmware date code. The date code
|
||
will be encoded in the yyyymmdd format. There may be several
|
||
versions of the base system firmware. The date code associated
|
||
with the version of the base system firmware that is being used
|
||
is reported. There may be other date code objects for other
|
||
specific modules such as fonts, localization modules, etc.;
|
||
these other datecode objects are device specific."
|
||
::= { id 5 }
|
||
|
||
|
||
fw-rom-revision OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This identifies the system code firmware ROM revision code. The
|
||
format for a revision is major_revision.minor_revision. There
|
||
may be other ROM revision code objects for other specific ROMs
|
||
such as font ROMs, localization ROMs, etc; these other ROM
|
||
revision code objects are device specific."
|
||
::= { id 6 }
|
||
|
||
|
||
device-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..32))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "User defined device name. The POS should indicate the maximum
|
||
supported string length. If the user entered string is too
|
||
long, the device will store as much as possible and will return
|
||
the <OKNearestLegal ValueSubstituted>.Additional information:
|
||
The maximum supported string length is 32
|
||
characters. If the user entered string is too long,
|
||
the device will store the first 32 characters and will
|
||
return the <noError> status."
|
||
::= { id 10 }
|
||
|
||
|
||
device-location OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "User defined device location. The POS should indicate the
|
||
maximum supported string length. If the user entered string is
|
||
too long, the device will store as much as possible and will
|
||
return the <OKNearestLegal ValueSubstituted>.Additional information:
|
||
The maximum supported string length is 16
|
||
characters. If the user entered string is too long,
|
||
the device will store the first 16 characters and will
|
||
return the <noError> status."
|
||
::= { id 11 }
|
||
|
||
|
||
asset-number OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "User defined asset number. The POS should indicate the maximum
|
||
supported string length. If the user entered string is too
|
||
long, the device will store as much as possible and will return
|
||
the <OKNearestLegal ValueSubstituted>.Additional information:
|
||
The maximum supported string length is 8
|
||
characters. If the user entered string is too long,
|
||
the device will store the first 8 characters and will
|
||
return the <noError> status."
|
||
::= { id 12 }
|
||
|
||
|
||
system-contact OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..32))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "User defined string containing the name of the person or group
|
||
that is responsible for the device. The POS should indicate the
|
||
maximum supported string length. If the user entered string is
|
||
too long, the device will store as much as possible and will
|
||
return the <noError>.
|
||
Additional information:
|
||
The maximum supported string length is 32
|
||
characters. If the user entered string is too long,
|
||
the device will store the first 32 characters and will
|
||
return the <noError> status.
|
||
This object only supports the transfer of UTF-8 strings"
|
||
::= { id 13 }
|
||
|
||
|
||
company-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..32))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "The maximum supported string length is 32 characters. If the
|
||
user entered string is too long, the device will store the
|
||
first 32 characters and will return the
|
||
<noError> status. This object only
|
||
supports the transfer of UTF-8 strings
|
||
Additional information:
|
||
The maximum supported string length is 32
|
||
characters. If the user entered string is too long,
|
||
the device will store the first 32 characters and will
|
||
return the <noError> status.
|
||
This object only supports the transfer of UTF-8 strings"
|
||
::= { id 22 }
|
||
|
||
|
||
ews-request-control-panel-supplies-status OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eFalse(1),
|
||
eTrue(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "System variable EWS_REQUEST_CONTROL_PANEL_SUPPPLIES_STATUS
|
||
requires a PML interface so that WJA can directly access it
|
||
without needing EWS support for that.
|
||
Additional information:
|
||
If this object is set to eTrue, the Supplies Status messages will
|
||
not be shown on the CP."
|
||
::= { settings-web-server 5 }
|
||
|
||
|
||
default-copies OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes default copies. Default copies is the
|
||
default values used by the PDL to control the number of copies
|
||
of each page in the print job that are printed. The print job
|
||
can override this value. The list of supported values should be
|
||
documented in the device POS.
|
||
Additional information:
|
||
The supported values are 1 through 32000.
|
||
Setting to an unsupported value causes the printer to substitute in a snap
|
||
value and to return <noError> status.
|
||
The snaps are as follows:
|
||
<1 snaps to 1
|
||
>999 snaps to 32000"
|
||
::= { settings-pdl 4 }
|
||
|
||
|
||
default-lines-per-page OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the default number of lines per page. The
|
||
POS indicates the supported values. An unsupported value causes
|
||
the printer to use the closest supported value, causing the
|
||
printer to return the <noError>.
|
||
Additional information:
|
||
The supported values in $product_str are 5 to 128.
|
||
Setting to an unsupported value causes the
|
||
the printer to substitute in a snap value and to return
|
||
<noError>
|
||
status.
|
||
The snap values are as follow:
|
||
<5 snaps to 5
|
||
>128 snaps to 128"
|
||
::= { settings-pdl 11 }
|
||
|
||
|
||
default-vmi OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the default vertical motion index. The unit
|
||
of measure for VMI is centipoints per line. The POS indicates
|
||
the supported values. An unsupported value causes the printer
|
||
to use the closest supported value, causing the printer to
|
||
return <noError>."
|
||
::= { settings-pdl 12 }
|
||
|
||
|
||
default-media-size OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eUSExecutive(1),
|
||
eUSLetter(2),
|
||
eUSLegal(3),
|
||
eLedger(11),
|
||
eStatement(15),
|
||
eROC16K(17),
|
||
eROC8K(19),
|
||
eISOandJISA5(25),
|
||
eISOandJISA4(26),
|
||
eISOandJISA3(27),
|
||
ePRC16K195X270(34),
|
||
ePRC8K260X368(35),
|
||
eJISB6(44),
|
||
eJISB5(45),
|
||
eJapanesePostcardDouble(72),
|
||
eIndexCard4X6(74),
|
||
eIndexCard5X8(75),
|
||
eCommercial10(81),
|
||
ePRC16K184X260(89),
|
||
eInternationalDL(90),
|
||
eInternationalC5(91),
|
||
eInternationalC6(92),
|
||
eInternationalB5(100),
|
||
eCustom(101),
|
||
eISOandJISA4R(282),
|
||
eUnknownMediaSize(32767),
|
||
eJISB5W(65491),
|
||
eISOandJISA3W(65509),
|
||
eISOandJISA4W(65510),
|
||
eISOandJISA5W(65511),
|
||
eStatementW(65521),
|
||
eLedgerW(65530),
|
||
eUSLetterW(65534)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This indicates the default media size. A write of an
|
||
unsupported value causes an <ErrorInvalidOrUnsupported Value>. Complete list of supported media sizes along with their
|
||
dimensions are listed in the ''Media Size Table'' near the end
|
||
of this document. (for a full list of media size enums see the
|
||
end of this file) "
|
||
::= { settings-pdl 13 }
|
||
|
||
|
||
cold-reset-media-size OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eUSLetter(2),
|
||
eISOandJISA4(26)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or sets the media size that is used as the
|
||
DEFAULT-MEDIA-SIZE when a cold reset occurs."
|
||
::= { settings-pdl 19 }
|
||
|
||
|
||
reprint OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eOn(2),
|
||
eAuto(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the reprint (jam recovery) setting. If eOn,
|
||
then the device will reprint pages jammed pages. If eOff, the
|
||
device will not attempt to reprint jammed pages. If eAuto, a
|
||
device dependent algorithm (which should be documented in the
|
||
POS) will be used to determine if the page gets reprinted. This
|
||
object controls all PDLs, unless a specific PDL supports its
|
||
own reprint control mechanism. To date, only PostScript has a
|
||
PDL reprint control mechanism."
|
||
::= { settings-pdl 36 }
|
||
|
||
|
||
calibration-power-on-delay OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This is the delay interval for the power on calibration in
|
||
minutes. This PML object is only used if the
|
||
CALIBRATION-POWER-ON-INITIATION PML object is set to eDelayed.
|
||
Additional information:
|
||
This is the delay interval for the power on calibration in
|
||
minutes. This PML object is only used if the
|
||
CALIBRATION-POWER-ON-INITIATION PML object is set to eDelayed."
|
||
::= { settings-prt-eng 21 }
|
||
|
||
|
||
duplex-blank-pages OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eDuplexBlankPagesAuto(1),
|
||
eDuplexBlankPagesYes(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "When the value of the system variable is set to
|
||
eDuplexBlankPagesAuto, it means to Smart Duplex in any of the
|
||
specified conditions. This selection is logically equivalent to
|
||
'NO, do not duplex blank pages if not duplexing them obtains a
|
||
performance enhancement'. When the value of the system variable
|
||
is set to eDuplexBlankPagesYes, it means to disable Smart
|
||
Duplexing.
|
||
Additional information:
|
||
When the value of the system variable is set to
|
||
eDuplexBlankPagesAuto, it means to Smart Duplex in any of the
|
||
specified conditions. This selection is logically equivalent to
|
||
'NO, do not duplex blank pages if not duplexing them obtains a
|
||
performance enhancement'. When the value of the system variable
|
||
is set to eDuplexBlankPagesYes, it means to disable Smart
|
||
Duplexing."
|
||
::= { settings-prt-eng 28 }
|
||
|
||
|
||
tray-prompt OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eDoNotDisplay(1),
|
||
eDisplay(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "If this object is set to eDisplay, whenever a paper tray is
|
||
opened, refilled, and closed in a printer, the end user is
|
||
prompted with a message 'To change size or type press check' on
|
||
the control panel. If this object is set to eDoNotDisplay, then
|
||
the end user will not be prompted with this message whenever a
|
||
paper tray is opened, refilled, and closed in a printer.
|
||
Additional information:
|
||
Whenever a paper tray is opened and closed, the user is
|
||
provided with two options Display and Do Not Display, through
|
||
the menu item Size/Type Prompt.On selecting Display he chooses
|
||
to get prompted with the message to change the size or type of
|
||
paper. Whereas he is not prompted with this message in case he
|
||
chooses Do Not Display."
|
||
::= { settings-intray 19 }
|
||
|
||
|
||
tray-disable-use-instead OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eDisabled(1),
|
||
eEnabled(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "If this object is set to eEnabled, the paper mount message that
|
||
is normally posted('To use another tray....') is turned off
|
||
thereby disallowing the user to specify another tray from which
|
||
paper can be taken for printing. However, on setting this
|
||
object to eDisabled the paper mount message is posted allowing
|
||
the user to specify another tray for paper feed.
|
||
Additional information:
|
||
The feature provides a menu item under TRAY BEHAVIOUR, i.e
|
||
USE ANOTHER TRAY which has two options ENABLED and DISABLED.
|
||
Whenever the menu item is set to ENABLED, it provides the user
|
||
with the ability to select another tray from which paper could
|
||
be provided for the job. However on selecting DISABLED forces
|
||
the user to provide paper through the same tray, after the paper
|
||
mount message is posted, in either cases."
|
||
::= { settings-ph 1 }
|
||
|
||
|
||
|
||
|
||
pcl-total-page-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of PCL pages printed by the device.
|
||
Additional information:
|
||
In $product_str the PCL page count is kept in
|
||
NVRAM, and the NVRAM value is updated at least every
|
||
10 pages. NOTE: The value returned by this object will
|
||
be incremented every page but if power is lost between
|
||
NVRAM updates, up to 9 pages of the page count may be
|
||
lost. The page count counter will be reset to zero
|
||
after 16,777,215 (2^24-1) pages.
|
||
The page count is incremented when a sheet of media is pulled from an input
|
||
tray. A duplex printed sheet will cause this counter to be incremented by
|
||
two."
|
||
::= { pdl-pcl 5 }
|
||
|
||
|
||
pcl-default-font-height OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the default PCL height. Height is an
|
||
approximate measure of the body of the type in centipoints. A
|
||
centipoint is 1/7200 inch. Height applies only to proportional
|
||
fonts. Point size, in points, can be converted to font height,
|
||
in centipoints, by multiplying the point size by 100. The POS
|
||
indicates the supported values. An unsupported value causes the
|
||
printer to use the closest supported value, causing the printer
|
||
to return <noError>. ''Closest'' means
|
||
the smallest absolute difference.
|
||
Additional information:
|
||
Supported values range from 400 to 99975, in
|
||
increments of 25 units.
|
||
Setting to an unsupported value causes the
|
||
printer to substitute in a snap value and to
|
||
return <noError> status.
|
||
The snap values are as follow:
|
||
<=400 snaps to 400
|
||
>=99975 snaps to 99975
|
||
Unsupported values in the range 400 to 99975 snap
|
||
DOWN to the previous supported value
|
||
(i.e 25293 snaps to 25275 or 75038 snaps to 75025)."
|
||
::= { pdl-pcl 13 }
|
||
|
||
|
||
pcl-default-font-source OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eInternal(1),
|
||
ePermanentSoft(2),
|
||
eRomSimm2(11),
|
||
eRomSimm3(12),
|
||
eRomSimm4(13),
|
||
eRomSimm5(14)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the value of the default font source
|
||
variable in NVRAM."
|
||
::= { pdl-pcl 14 }
|
||
|
||
|
||
pcl-default-font-number OBJECT-TYPE
|
||
SYNTAX INTEGER(0..255)
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the value of the default font number
|
||
variable in NVRAM. Writing an unsupported value causes the
|
||
printer to generate an <badValue>.
|
||
Additional information:
|
||
Valid numbers or 0 - 255, but only font numbers that are
|
||
included in the PCL FONT LIST are selectable."
|
||
::= { pdl-pcl 15 }
|
||
|
||
|
||
pcl-default-font-width OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the default PCL font width. Width is
|
||
expressed as the width of a character in centipoints. A
|
||
centipoint is 1/7200 inch. Width applies only to fixed space
|
||
fonts. Pitch, in character per inch, can be converted to font
|
||
width, in centipoints, by dividing 7200 by the pitch. The POS
|
||
indicates the supported values. An unsupported value causes the
|
||
printer to use the closest supported value, causing the printer
|
||
to return <noError>. ''Closest'' means
|
||
the smallest absolute difference.
|
||
Additional information:
|
||
Setting to an unsupported value causes the
|
||
printer to substitue in a snap value (listed below)
|
||
and return <noError> status.
|
||
The snap values for pitch are as follow:
|
||
<=44 snaps to 44
|
||
>=9999 snaps to 9999"
|
||
::= { pdl-pcl 16 }
|
||
|
||
|
||
postscript-total-page-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Total number of PostScript pages printed by the device.
|
||
Additional information:
|
||
This object is only supported if the PostScript
|
||
option is installed.
|
||
In $product_str the count is kept in NVRAM, and the
|
||
NVRAM value is updated at least every 10
|
||
sheets. NOTE: The value returned by this object will
|
||
be incremented every sheet but if power is lost between
|
||
NVRAM updates up to 9 sheets of the count may be
|
||
lost. The counter will be reset to zero
|
||
after 16,777,215 (2^24-1) pages. "
|
||
::= { pdl-postscript 5 }
|
||
|
||
|
||
postscript-print-errors OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eOn(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the value of the print PostScript errors
|
||
setting. If eOn, PostScript prints an error page showing the
|
||
error encountered and the stack at the time of the error.
|
||
Additional information:
|
||
This object is only supported if the PostScript
|
||
option is installed."
|
||
::= { pdl-postscript 11 }
|
||
|
||
|
||
collated-originals-support OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates that the printer can create multiple, collated
|
||
'originals' of a job and shows the level of support for this
|
||
capability.
|
||
cCollatedOriginals - The printer can create multiple
|
||
collated originals, or 'mopies'. This is the base
|
||
functionality required by the other collection items.
|
||
|
||
cProofAndHold - The printer saves a copy of the job while
|
||
printing the first mopy. Later, this held job can be
|
||
released and the rest of the mopies will print.
|
||
cSecurityPrint - The printer spools the job and holds the
|
||
job until the user releases the job by entering a
|
||
<<hidden>> at the printer's control panel.
|
||
cAutoHighlight - The printer prints the job a number of
|
||
times with a mail distribution list prepended to each
|
||
job. A different mailing address is highlighted on each
|
||
mopy.
|
||
cCollatedAtSpeed - The printer can create multiple collated
|
||
copies where all copies after the original are printed
|
||
at engine speed.
|
||
Additional information:
|
||
Indicates that the printer can create multiple, collated
|
||
originals of a job and shows the level of support for this
|
||
capability.
|
||
cCollatedOriginals - The printer can create multiple collated
|
||
originals, or mopies.
|
||
|
||
This is the base functionality required by the other
|
||
collection items.
|
||
Without disk, this object will not exist. This will be set at
|
||
boot-up initialization. If the disk fails, in any way, then
|
||
the disk error functionality will handle the situation.
|
||
|
||
A color printer (LaserJet 4550) that only has a RAMDISK installed is
|
||
treated like there is no disk and therefore this object will
|
||
not exist.
|
||
|
||
The value of this object will be:
|
||
!cCollatedOriginals - Only FLASH installed
|
||
cCollatedOriginals - IDE is installed combined
|
||
with/without FLASH
|
||
cCollatedOriginals - RAMDISK is On combined with/without FLASH"
|
||
::= { status-system 42 }
|
||
|
||
|
||
host-application-available-memory OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the amount of memory, in bytes, that the device has
|
||
available for job-related processing or resources. Also known
|
||
as driver work space (DWS) memory."
|
||
::= { status-system 59 }
|
||
|
||
|
||
socket-ping-job-events-version OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..10))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object reports the current version of the Socket Ping Job
|
||
Events capability. The version number is returned as a string
|
||
in the format MAJOR.MINOR.SUB version. (eg. 1.0.1) If socket
|
||
ping is not supported by this printer then the object is either
|
||
not implemented or it returns a '0'."
|
||
::= { socket-ping 1 }
|
||
|
||
|
||
job-info-change-id OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(16))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the current value of an object in the job-info sub-tree
|
||
whose value has changed. Define the object identifier for the
|
||
object whose value has changed as
|
||
job-info.required-field.optional-field.job-id. job-info
|
||
represents the OID prefix of all objects in the job-info
|
||
sub-tree. Required-field represents the OID field value that
|
||
follows the job-info prefix. Since some objects in the job-info
|
||
sub-tree have two OID fields between the job-info prefix and
|
||
the job-id, the optional-field represents the OID field between
|
||
the required-field and the job-id field, if present. Using this
|
||
definition, the format for the JOB-INFO-CHANGE-ID binary value
|
||
can be described as follows:
|
||
Bytes 0-3 : required-field
|
||
Bytes 4-7 : optional-field, or all zeros if there
|
||
is no optional field
|
||
Bytes 8-11: Job ID.
|
||
Bytes 12-n : The value of the object job-info.
|
||
required-field.optional-field.job-id.
|
||
All multi-byte values stored in Motorola (big-endian) format,
|
||
where the most significant byte occurs first.
|
||
Additional information:
|
||
$product_str will use this object to report
|
||
changes to the job-info-pages-printed and job-info-state
|
||
objects. The required-field (bytes 0 through 3) will
|
||
designate whether the change to be reported involves the
|
||
pages printed (13) or job state (15). The optional-field
|
||
(bytes 4 through 7) will always be zeroes. The value-field
|
||
(bytes 12 through 15) will contain the new value for pages
|
||
printed or job state cast to a 32-bit integer.
|
||
|
||
Note: It is possible that traps generated by this object
|
||
have the same value. This is caused by the architecture of
|
||
$product_str. In the $product_str System, it is highly probable that
|
||
the object value will change so rapidly that when the trap is
|
||
processed, PML will read the same value twice. This is timing
|
||
related and will generally be seen at the end of a job."
|
||
::= { settings-job 3 }
|
||
|
||
|
||
hold-job-timeout OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "The time, in minutes, that the printer will wait before
|
||
automatically deleting a held job. This allows the printer to
|
||
automatically clean up jobs that have been forgotten (held but
|
||
never released).
|
||
Additional information:
|
||
This only applies to temporary held jobs, i.e., HOLD=ON or
|
||
PROOF. This is a global timer that only affects the jobs
|
||
that are sent after it is set.
|
||
A value of 0 means never delete the jobs.
|
||
Setting it to an unsupported value causes
|
||
the printer to substitute a value (listed
|
||
below) and to return <noError>
|
||
status.
|
||
LaserJet 4600 supports values of 0, 60, 240, 1440, and 10080
|
||
The values are as follows:
|
||
<=0 snap to 0 (disabled)
|
||
>=1 and <=150 snap to 60 (60 minutes)
|
||
>=151 and <=840 snap to 240 (4 hours)
|
||
>=841 and <=2880 snap to 1440 (1 day)
|
||
>=2881 snap to 10080 (1 week)"
|
||
::= { settings-job 10 }
|
||
|
||
|
||
current-job-parsing-id OBJECT-TYPE
|
||
SYNTAX INTEGER(-1..2147483647)
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the printer assigned job identification for the job
|
||
currently being processed by the processing PDL sub-system. The
|
||
job ID is a monotonically increasing number. The job ID may be
|
||
reset to zero at power-up and may roll over to zero after
|
||
reaching some maximum value.
|
||
Additional information:
|
||
A value of -1 is returned when the printer
|
||
is not parsing a job.
|
||
|
||
When data for a new job is detected, this object is
|
||
updated (the job may or may not turn out to be a Null
|
||
Job); however, the trap does not occur until the printer
|
||
determines that it is not a Null Job. (A job is considered
|
||
to be a 'null job' if it has no name or job attribute,
|
||
causes no pages to be printed, and consumes MIN_JOB_SIZE
|
||
(9) or fewer bytes.) A trapped value will differ from
|
||
the previous value by one or more.
|
||
|
||
Some job-info- objects are created when the first data
|
||
bytes are received. If the printer determines that the
|
||
job is a Null Job, the job-info- objects related to the
|
||
Null Job are deleted. $product_str retains the job-info-
|
||
objects for the MAX_JOBS_IN_LIST (32) most recent jobs
|
||
that are not Null Jobs.
|
||
|
||
The first job received after power-up will have job ID 1,
|
||
and the job ID will increment to 2,147,483,647 before
|
||
rolling to zero. To distinguish whether a power cycle or a
|
||
rollover causes a reduction in the job ID value, the
|
||
object prtGeneralConfigChanges can be watched and if it
|
||
increments at the same time as the drop is observed in
|
||
the value of CURRENT-JOB-PARSING-ID, then a power cycle
|
||
is the most likely cause."
|
||
::= { job-being-parsed 1 }
|
||
|
||
|
||
job-info-name1 OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the first part of this print job's name. The last OID
|
||
field for this dynamic object contains the job ID.
|
||
Additional information:
|
||
The job name is the string specified by the
|
||
NAME= parameter of the @PJL JOB command which allows a
|
||
maximum of 80 characters. The first 40 characters are
|
||
in this object and the second 40 are in job-info-name2.
|
||
The symbol set is Roman-8.
|
||
|
||
When jobs are nested, the value assigned to this object
|
||
is the name provided by the most recent @PJL JOB NAME=
|
||
command. If no name is provided, a null string is
|
||
returned."
|
||
::= { job-info 1 }
|
||
|
||
|
||
job-info-name2 OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the second part of this print job's name. The last OID
|
||
field for this dynamic object contains the job ID.
|
||
Additional information:
|
||
See job-info-name1."
|
||
::= { job-info 2 }
|
||
|
||
|
||
job-info-stage OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates what printer sub-systems are currently processing
|
||
this print job. The last OID field for this dynamic object
|
||
contains the job ID. cSourceSubsystem - some of the job is in
|
||
the printer I/O subsystem. cProcessingSubsystem - some of the
|
||
job is in the printer imaging processing subsystem.
|
||
cDestinationSubsystem - some of the job is being printed.
|
||
Additional information:
|
||
For $product_str, cSourceSubsystem and
|
||
cProcessingSubsystem will always be set and cleared
|
||
together. They are set when the beginning of the
|
||
job is detected, and they are cleared when the end
|
||
of the job is parsed.
|
||
|
||
A non-printing job will never set
|
||
cDestinationSubsystem.
|
||
|
||
When a page is ready to be printed (the intermediate has
|
||
been built and the page is `closed' by the personality),
|
||
cDestinationSubsystem will be set even if a page of a
|
||
previous job is currently being printed.
|
||
cDestinationSubsystem remains set until the last page of
|
||
the job has finished printing.
|
||
|
||
If a page requires extensive processing and allows all
|
||
the previous pages of a job to complete printing,
|
||
cDestinationSubsystem will remain set until the last
|
||
page of the job has finished printing."
|
||
::= { job-info 10 }
|
||
|
||
|
||
job-info-io-source OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates which I/O source, the print job was received over.
|
||
The value maps to port numbering scheme supported in the
|
||
DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree."
|
||
::= { job-info 11 }
|
||
|
||
|
||
job-info-pages-processed OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates the number of pages processed by the processing
|
||
subsystem. If neither the cSourceSubsystem or the
|
||
cProcessingSubsystem items are in the associated JOB-INFO-STAGE
|
||
object, then this object contains the total number of pages
|
||
processed for this job. The last OID field for this dynamic
|
||
object contains the job ID.
|
||
Additional information:
|
||
This object is incremented by one when a
|
||
page is processed (`closed' by the personality), regardless
|
||
of the number of pages that are printed as a result of the
|
||
single page processed. In other words, it does not matter
|
||
how many identical copies of a page are printed or no pages
|
||
may be printed if operating in silent run mode, this count
|
||
is incremented exactly once.
|
||
|
||
A page is considered processed when all of the input
|
||
data has been processed for a page (that is, when the
|
||
intermediate has been produced, and the personality has
|
||
`closed' the page. At this time, the image of the page is
|
||
not necessarily completely formed.)"
|
||
::= { job-info 12 }
|
||
|
||
|
||
job-info-pages-printed OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates the number of pages printed by the destination
|
||
subsystem. If none of the cSourceSubsystem,
|
||
cProcessingSubsystem or cDestinationSubsystem items are in the
|
||
associated JOB-INFO-STAGE object, then this object contains the
|
||
total number of pages printed for this job. This value may
|
||
increase by two each time for duplex jobs. The last OID field
|
||
for this dynamic object contains the job ID.
|
||
Additional information:
|
||
If multiple copies of a page are printed,
|
||
each copy is counted individually."
|
||
::= { job-info 13 }
|
||
|
||
|
||
job-info-size OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates the number of bytes of data processed by the
|
||
processing subsystem. If neither of the cSourceSubsystem or
|
||
cProcessingSubsystem items are in the associated JOB-INFO-STAGE
|
||
object, then this object contains the size of this job, in
|
||
bytes. The last OID field for this dynamic object contains the
|
||
job ID.
|
||
Additional information:
|
||
This count may be incremented by values
|
||
other than one as blocks of data are processed; blocks
|
||
of data (which may be as large as 2K bytes) will be
|
||
processed in a varying amount of time.
|
||
|
||
During the processing of a job and even when a job completes,
|
||
an exact count of the number of I/O bytes processed by the
|
||
job is not necessarily to be expected."
|
||
::= { job-info 14 }
|
||
|
||
|
||
job-info-state OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eAborted(3),
|
||
eWaitingForResources(4),
|
||
ePrinted(5),
|
||
eTerminating(7),
|
||
eCancelled(10),
|
||
eProcessing(11),
|
||
eScanning(12),
|
||
eSending(13)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates the state of the job. The last OID field for this
|
||
dynamic object contains the job ID.
|
||
eAborted - the print job was aborted.
|
||
eWaitingForResources - the print job requires resources
|
||
that are not currently available. Example resources
|
||
that can cause the job to wait include the print engine
|
||
or PDL processor being unavailable. The print engine
|
||
could be unavailable due to paper out, paper jam,
|
||
staple out, stapler jam, marking agent low, output bin
|
||
full, etc. The PDL processor could be unavailable due
|
||
to an off-line condition. Each printer specific object
|
||
specification should state which conditions cause a job
|
||
to be waiting for resources and also state which
|
||
objects can be retrieved by an application to determine
|
||
the exact cause of a resource being unavailable.
|
||
ePrinted - the job has printed. The related JOB-INFO-
|
||
OUTCOME object indicates if any problems were
|
||
encountered while the job was processed.
|
||
eRetained - the job can be reprinted.
|
||
eTerminating - the job was aborted or cancelled and is
|
||
currently is terminating.
|
||
eInterrupted - the job has been interrupted. The job can be
|
||
continued.
|
||
ePaused - the job has been paused. The job can be
|
||
continuted.
|
||
eCancelled - the job has been cancelled.
|
||
eProcessing - the job is currently being printed normally.
|
||
"
|
||
::= { job-info 15 }
|
||
|
||
|
||
job-info-outcome OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOk(3)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates if any warning or error conditions were encountered
|
||
while processing the assoicated job. The last OID field for
|
||
this dynamic object contains the job ID.
|
||
Additional information:
|
||
In $product_str, warnings and errors are not recorded
|
||
in this object. Although no meaningful information can be
|
||
obtained from this object, it is kept around for the
|
||
compatibility needs of existing software."
|
||
::= { job-info 19 }
|
||
|
||
|
||
job-info-outbins-used OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates which output bins this job has delivered printed
|
||
pages to. The last OID field for this dynamic object contains
|
||
the job ID.
|
||
Additional information:
|
||
The bins designated by this collection include
|
||
the printer's own output bins as well as the `logical output
|
||
bins' associated with any attached external paper handling
|
||
devices. (The mapping of the physical output bins of an
|
||
external paper handling device to its `logical output bins'
|
||
depends on the usage mode of the device. For instance, in
|
||
`mailbox mode', there is one-to-one correspondence of
|
||
`logical output bins' to physical bins, whereas in `stacker
|
||
mode', one `logical output bin' may map to several physical
|
||
bins.)
|
||
|
||
Although LaserJet 4100 and LaserJet 4550 both come with two output
|
||
bins -- a face-down bin on the top of the device and a
|
||
face-up bin at the back of the device -- firmware will not
|
||
provide a means of selecting between the two, nor will it
|
||
report which of the two gets used. For this reason, bit 0
|
||
(cOutbin1) of this collection is being used to designate
|
||
both of these bins together."
|
||
::= { job-info 20 }
|
||
|
||
|
||
job-info-physical-outbins-used OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates which physical output bins this job has delivered
|
||
printed pages to. The last OID field for this dynamic object
|
||
contains the job ID.
|
||
Additional information:
|
||
The output bins designated by the bits of
|
||
this collection include the standard output bin(s) plus the
|
||
physical bins of attached external paper handling devices.
|
||
The configuration (if any) of external paper handling devices
|
||
will determine the mapping of individual bits in this
|
||
collection to the physical bins of the devices.
|
||
For LaserJet 4100 and LaserJet 4550, the cOutbin1 is used for Face Down
|
||
bin, cOutbin2 is used for Face Up bin, and 3-15 are used for
|
||
the 13 optional output bins (12 plus an extension to the Face
|
||
Up bin) for backwards compatibility with LaserJet 8000/LaserJet 8100 and
|
||
forwards compatibility with LaserJet 8150. However, since they
|
||
cannot distinguish output going to the Face Up or Face Down
|
||
bin in the firmware because the diverter can only be moved
|
||
manually, bit 0 (cOutbin1) is being used to designate
|
||
both of these bits together. If an external paper handling
|
||
output device is connected, then bit 2 (cOutbin3) will
|
||
represent the device's first output bin (and so on)."
|
||
::= { job-info 22 }
|
||
|
||
|
||
job-info-attr-1 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. Attribute objects are saved sequentially, starting
|
||
with 1, after the start of a job. If more attributes are set
|
||
than there are objects to store them, the excess JOBATTR values
|
||
are ignored. If the corresponding SET JOBATTR= command has not
|
||
been received when a get is done for this object, a status of
|
||
<noSuchName> will be returned."
|
||
::= { job-info-attribute 1 }
|
||
|
||
|
||
job-info-attr-2 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 2 }
|
||
|
||
|
||
job-info-attr-3 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 3 }
|
||
|
||
|
||
job-info-attr-4 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 4 }
|
||
|
||
|
||
job-info-attr-5 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 5 }
|
||
|
||
|
||
job-info-attr-6 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 6 }
|
||
|
||
|
||
job-info-attr-7 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 7 }
|
||
|
||
|
||
job-info-attr-8 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 8 }
|
||
|
||
|
||
job-info-attr-9 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 9 }
|
||
|
||
|
||
job-info-attr-10 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 10 }
|
||
|
||
|
||
job-info-attr-11 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 11 }
|
||
|
||
|
||
job-info-attr-12 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 12 }
|
||
|
||
|
||
job-info-attr-13 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 13 }
|
||
|
||
|
||
job-info-attr-14 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 14 }
|
||
|
||
|
||
job-info-attr-15 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 15 }
|
||
|
||
|
||
job-info-attr-16 OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(1..80))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the value that was set in PJL via the SET JOBATTR=
|
||
command. See JOB-INFO-ATTR-1 for details."
|
||
::= { job-info-attribute 16 }
|
||
|
||
|
||
job-info-requested-originals OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The number of requested collated copies. The value was supplied
|
||
with the job via PJL QTY variable, the PostScript Collate and
|
||
NumCopies entries in the page device dictionary, or via some
|
||
other mechansim."
|
||
::= { job-info 24 }
|
||
|
||
|
||
job-info-page-count-current-original OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The page number being printed within the current copy of a
|
||
collated multi-copy job. This value changes when the
|
||
job-info-pages-printed changes. The job-info-pages-printed
|
||
indicates the total number of pages printed in the job, while
|
||
this object indicates the number of pages printed for this copy
|
||
of a collated multi-copy job.
|
||
Additional information:
|
||
The number of pages in the current copy of a collated
|
||
multi-copy job which have been completely printed and
|
||
safely delivered to the output bin."
|
||
::= { job-info 25 }
|
||
|
||
|
||
job-info-pages-in-original OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Number of pages in a single copy of a collated multi-copy job."
|
||
::= { job-info 26 }
|
||
|
||
|
||
job-info-printed-originals OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Number of collated copies completely printed and delivered to
|
||
the output bin at time of query."
|
||
::= { job-info 27 }
|
||
|
||
|
||
job-info-accounting-media-size OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eUSExecutive(1),
|
||
eUSLetter(2),
|
||
eUSLegal(3),
|
||
eLedger(11),
|
||
eROC16K(17),
|
||
eJISExecutive(18),
|
||
eROC8K(19),
|
||
eISOandJISA5(25),
|
||
eISOandJISA4(26),
|
||
eISOandJISA3(27),
|
||
eJISB5(45),
|
||
eJISB4(46),
|
||
eISOB5(65),
|
||
eJapansePostcardDouble(72),
|
||
eMonarch(80),
|
||
eCommercial10(81),
|
||
eInternationalDL(90),
|
||
eInternationalC5(91),
|
||
eInternationalB5(100),
|
||
eCustom(101),
|
||
eUSLetterR(258),
|
||
eISOandJISA4R(282),
|
||
eUnknownMediaSize(32767)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the media size of the printed job. The media size of
|
||
the first page will decide the media size of the entire job.
|
||
The return value of this object will only be valid when the
|
||
printer finishes printing the entire job."
|
||
::= { job-info-accounting 1 }
|
||
|
||
|
||
job-info-accounting-media-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eUnknownMedia(1),
|
||
eStandardType(2),
|
||
ePreprinted(3),
|
||
eLetterhead(4),
|
||
eTransparency(5),
|
||
eLabels(7),
|
||
ePrepunched(6),
|
||
eBond(8),
|
||
eRecycled(9),
|
||
eColored(10),
|
||
eCardStock(11),
|
||
eRough(12),
|
||
eHeavy(14),
|
||
eUserType1(16),
|
||
eUserType2(17),
|
||
eUserType3(18),
|
||
eUserType4(19),
|
||
eUserType5(20),
|
||
eExtraHeavy(40),
|
||
eIntermediate(42),
|
||
eExtraHeavyGloss(44)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the media type of the printed job. The media type of
|
||
the first page will decide the media type of the entire job.
|
||
The return value of this object will only be valid when the
|
||
printer finishes printing the entire job."
|
||
::= { job-info-accounting 2 }
|
||
|
||
|
||
job-info-accounting-finishing-options OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eNoFinish(1),
|
||
eOffset(2),
|
||
ePunch(3),
|
||
eStapler(4),
|
||
eFinisher(5)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the finishing option used on the printed job. The
|
||
finishing option specified for the first page will decide the
|
||
finishing option of the entire job. The return value of this
|
||
object will only be valid when the printer finishes printing
|
||
the entire job."
|
||
::= { job-info-accounting 3 }
|
||
|
||
|
||
job-info-accounting-media-simplex-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the total number of simplex pages printed in a
|
||
particular job."
|
||
::= { job-info-accounting 4 }
|
||
|
||
|
||
job-info-accounting-media-duplex-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the total number of duplex pages printed in a
|
||
particular job."
|
||
::= { job-info-accounting 5 }
|
||
|
||
|
||
job-info-accounting-grayscale-impression-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the total number of monochrome pages printed in a
|
||
particular job."
|
||
::= { job-info-accounting 6 }
|
||
|
||
|
||
job-info-accounting-color-impression-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the total number of color pages printed in a
|
||
particular job."
|
||
::= { job-info-accounting 7 }
|
||
|
||
|
||
job-info-accounting-black-dots OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the total number of black pixels used in a particular
|
||
job.
|
||
Additional information:
|
||
This object reports kilodots. (A kilodot
|
||
is 1000 dots.)"
|
||
::= { job-info-accounting 8 }
|
||
|
||
|
||
job-info-accounting-yellow-dots OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the total number of yellow pixels used in a particular
|
||
job.
|
||
Additional information:
|
||
This object reports kilodots. (A kilodot
|
||
is 1000 dots.)"
|
||
::= { job-info-accounting 9 }
|
||
|
||
|
||
job-info-accounting-cyan-dots OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the total number of cyan pixels used in a particular
|
||
job.
|
||
Additional information:
|
||
This object reports kilodots. (A kilodot
|
||
is 1000 dots.)"
|
||
::= { job-info-accounting 10 }
|
||
|
||
|
||
job-info-accounting-magenta-dots OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Contains the total number of magenta pixels used in a
|
||
particular job.
|
||
Additional information:
|
||
This object reports kilodots. (A kilodot
|
||
is 1000 dots.)"
|
||
::= { job-info-accounting 11 }
|
||
|
||
|
||
job-info-accounting-job-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
ePrintJob(1),
|
||
eIPPJob(2),
|
||
eCopyJob(3),
|
||
eCopyInterruptJob(4),
|
||
eJetSendJob(5),
|
||
eInternalPage(6),
|
||
eCleaningPage(7),
|
||
eAutoCleaningPage(8),
|
||
eDigitalSendJob(9),
|
||
eWebPrintJob(10),
|
||
eFaxPrintJob(11),
|
||
eRetrievedJob(12),
|
||
ePhotoCardPrintJob(13),
|
||
eUnknownJob(1000)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Keeps track of what type of job is processed. "
|
||
::= { job-info-accounting 14 }
|
||
|
||
|
||
held-job-user-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..40))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "User name that is obtained by the driver through some internal
|
||
method or from user input.
|
||
Additional information:
|
||
The following is a general description for all the JOB-MANAGEMENT
|
||
objects described below. These object describe the attributes of the
|
||
dynamic list containing all the stored jobs on the disk available for
|
||
printing or deleting via the job-management feature. The jobs on this
|
||
list are not deleted from the disk unless explicitly specified by the
|
||
user. A print job may be specified for retention by PJL commands in the
|
||
data stream.
|
||
|
||
Following is a list of the PJL commands (i.e. these comments describe
|
||
the PJL implementation and in some cases do not reflect the PML
|
||
implementation.):
|
||
|
||
@PJL SET HOLD=OFF|ON|PROOF|STORE|PRINT
|
||
|
||
GENERAL DESCRIPTION:
|
||
|
||
This variable specifies the retention classification of the job. The
|
||
values indicate whether the job is printed immediately and/or stored.
|
||
|
||
OFF: The job is printed but not retained on disk after printing. This
|
||
is the default value.
|
||
|
||
ON: This setting may be thought of as free proof-and-hold. The
|
||
requested number of copies will be printed and the job will be
|
||
temporarily stored on disk. The job will then be available for printing
|
||
additional copies through the control panel and through PML. There will
|
||
be a limit to the number of these temporary jobs that may be stored, and
|
||
when the limit is exceeded the oldest job will be removed from the disk.
|
||
|
||
PROOF: One copy of the job is printed and remaining copies are stored
|
||
on disk. The job is then available to select for printing via the
|
||
control panel menus or PML. The job will be deleted from the disk when
|
||
the disk space is needed for another proof and hold job but only after
|
||
the additional copies have been printed. It will also be deleted when
|
||
the user sends down another proof and hold job with the same job name,
|
||
or the user explicitly deletes the job.
|
||
|
||
STORE: The job is not printed immediately but is retained on disk. The
|
||
job is available to select for printing via the control panel
|
||
|
||
DEFAULT VALUE: OFF
|
||
|
||
The value will be stored in RAM only, not in NVRAM.
|
||
The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
|
||
The variable will appear in the PJL INFO VARIABLES list.
|
||
|
||
@PJL SET USERNAME=<80 bytes>
|
||
|
||
GENERAL DESCRIPTION:
|
||
|
||
Eighty-character user name that is obtained by the driver through some
|
||
internal method or from user input. If the job stream does not contain
|
||
a USERNAME the default value will be NO USER NAME. The driver is
|
||
responsible for determining the size of the printers control panel and
|
||
sending a string of appropriate length.
|
||
|
||
DEFAULT VALUE: NO USER NAME
|
||
|
||
The value will be stored in RAM only, not in NVRAM.
|
||
The legal PJL commands are SET and, INQUIRE. DEFAULT is not allowed.
|
||
The variable will appear in the PJL INFO VARIABLES list.
|
||
|
||
@PJL SET JOBNAME=<80 bytes>
|
||
|
||
GENERAL DESCRIPTION:
|
||
|
||
Eighty-character job name that may be generated by the driver or
|
||
obtained from user input. This value may be used in conjunction with
|
||
the USERNAME to select a job from the front panel. If the job stream
|
||
does not contain a JOBNAME, the printer will assume no job name; each
|
||
subsequent job that is sent down by the same user would replace the
|
||
users last job on disk. The driver is responsible for determining the
|
||
size of the printers control panel and sending a string of appropriate
|
||
length.
|
||
|
||
NOTE: The limit of 80 bytes is a PJL limit. The limit for PML will
|
||
be 40 bytes.
|
||
|
||
DEFAULT VALUE: NULL STRING
|
||
|
||
The value will be stored in RAM only, not in NVRAM.
|
||
The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
|
||
The variable will appear in the PJL INFO VARIABLES list.
|
||
|
||
@PJL SET HOLDTYPE=PUBLIC|PRIVATE
|
||
|
||
GENERAL DESCRIPTION:
|
||
|
||
This variable specifies the privacy level of the job.
|
||
|
||
PUBLIC: The job does not require a PIN in order to be released for
|
||
printing. This is the default value.
|
||
|
||
PRIVATE: The job requires a PIN in order to be released for printing.
|
||
The PIN is specified by the HOLDKEY variable. If the
|
||
|
||
HOLDTYPE is set to PRIVATE, a HOLDKEY value must be specified. If no
|
||
HOLDKEY is specified, the job will be considered PUBLIC.
|
||
|
||
DEFAULT VALUE: PUBLIC
|
||
|
||
The value will be stored in RAM only, not in NVRAM.
|
||
The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
|
||
The variable will appear in the PJL INFO VARIABLES list.
|
||
|
||
@PJL SET HOLDKEY=4 digits, 0000...9999
|
||
|
||
GENERAL DESCRIPTION:
|
||
|
||
A 4-digit string, each digit 0-9, that is specified in the job stream
|
||
and then required to be entered in order to release the job for
|
||
printing. If a HOLDTYPE is PRIVATE, a HOLDKEY value must be specified.
|
||
If no HOLDKEY value is specified, a job will be considered PUBLIC.
|
||
|
||
DEFAULT VALUE: NULL STRING
|
||
|
||
The value will be stored in RAM only, not in NVRAM.
|
||
The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
|
||
The variable will appear in the PJL INFO VARIABLES list.
|
||
|
||
|
||
The format for the OID is as follows:
|
||
|
||
3.4.1.6.x.y
|
||
<-----> | |
|
||
| | \
|
||
/ | job-id in the system
|
||
/ \
|
||
PML_JOB_MGNT_ROOT_OID \
|
||
job attribute 1..6
|
||
|
||
x values are 1..6:
|
||
|
||
1) user-name: user name that is obtained by the driver through some
|
||
internal method or from user input.
|
||
|
||
2) job-name: job name may be generated by the driver or obtained from
|
||
user input.
|
||
|
||
3) hold: indicates the retention classification of the job. The values
|
||
indicate whether the job is printed immediately and/or stored. There
|
||
are 4 options:
|
||
OFF: The job is printed but not retained on the disk.
|
||
ON: The job is printed and stored temporarily on the disk.
|
||
STORE: The job is not printed but stored on the disk.
|
||
PROOF: One copy of the job is printed and the remaining copies are
|
||
stored on the disk.
|
||
|
||
4) holdtype: The variable specifies the security level of the job.
|
||
PUBLIC: The job does not require a PIN in order to release the job for
|
||
printing.
|
||
PRIVATE: The job requires a PIN in order to be released for printing.
|
||
|
||
5) quantity: number of copies to print. Valid values are 0..999.
|
||
|
||
6) pin: A 4 digit string, each digit is 0-9, that is specified in the
|
||
job stream and then required to be entered in order to release the job
|
||
for printing.
|
||
|
||
y : an unsigned 32-bit number which uniquely identifies the job. The job
|
||
id for the job remains the same for the job until it is deleted from the
|
||
held jobs list.
|
||
|
||
|
||
For example, the OID below is asking for the user name of the
|
||
job whose id is 3. The application would issue:
|
||
|
||
OID
|
||
get 3.4.1.6.1.3
|
||
|
||
For example, the <getnext> OID values sequence is as follows:
|
||
|
||
OID returned OID
|
||
getnext 3.4.1.6 3.4.1.6.1.1
|
||
getnext 3.4.1.6.1.1 3.4.1.6.1.2
|
||
getnext 3.4.1.6.2.1 3.4.1.6.2.2
|
||
***
|
||
getnext 3.4.1.6.1.6 3.4.1.6.1.7
|
||
getnext 3.4.1.6.2.1 3.4.1.6.2.2
|
||
getnext 3.4.1.6.5.2828 3.4.1.6.6.1
|
||
|
||
NOTE: for example above, job id 2828 is the last job in the list of
|
||
held jobs.
|
||
***
|
||
|
||
Also supported is <getnext> on the job attributes:
|
||
OID returned OID
|
||
getnext 3.4.1.6.1 3.4.1.6.1.1
|
||
getnext 3.4.1.6.6 3.4.1.6.6.1"
|
||
::= { held-job-info 1 }
|
||
|
||
|
||
held-job-job-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..40))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The job name may be generated by the driver or obtained from
|
||
user input."
|
||
::= { held-job-info 2 }
|
||
|
||
|
||
held-job-retention OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eHoldOff(1),
|
||
eHoldOn(2),
|
||
eHoldStore(3),
|
||
eHoldProof(4)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates the retention classification of the job. The values
|
||
indicate whether the job is printed immediately or stored.
|
||
There are 4 options:
|
||
eHoldOff: The job is printed but not retained on the disk.
|
||
|
||
eHoldOn: The job is printed and stored temporarily on the
|
||
disk.
|
||
eHoldStore: The job is not printed but stored on the disk.
|
||
|
||
eHoldProof: One copy of the job is printed and the
|
||
remaining copies are stored on the disk. "
|
||
::= { held-job-info 3 }
|
||
|
||
|
||
held-job-security OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eHoldTypePublic(1),
|
||
eHoldTypePrivate(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The variable specifies the security level of the job.
|
||
eHoldTypePublic: The job does not require a PIN in order to
|
||
release the job for printing.
|
||
eHoldTypePrivate: The job requires a PIN in order to be
|
||
released for printing. "
|
||
::= { held-job-info 4 }
|
||
|
||
|
||
held-job-quantity OBJECT-TYPE
|
||
SYNTAX INTEGER(1..999)
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Number of copies to print."
|
||
::= { held-job-info 5 }
|
||
|
||
|
||
held-job-pin OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..4))
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "A string that is specified in the job stream and then required
|
||
to be entered in order to release the job for printing. PIN
|
||
stands for Personal Identification Number.
|
||
Additional information:
|
||
Must be a 4 digit string, each digit must be 0..9 or a null string
|
||
if there is no pin.
|
||
For security purposes, you can no longer get the value of the PIN."
|
||
::= { held-job-info 6 }
|
||
|
||
|
||
held-job-print OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(12))
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Instructs the printer to schedule the specified held job for
|
||
printing with the specified number of copies. The job-id is
|
||
used to identify which job to print. A held job can also be
|
||
printed from the control panel.
|
||
Additional information:
|
||
Bytes 0-3 is the job id of the job to print.
|
||
Bytes 4-7 is the number of copies to print.
|
||
Bytes 8-11 (optional) contain the PIN for
|
||
a Private job. "
|
||
::= { held-job-control 1 }
|
||
|
||
|
||
held-job-delete OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Instructs the printer to delete the specified held job from the
|
||
list. The job-id is used to identify which job to delete. A
|
||
held job can also be deleted from the control panel.
|
||
Additional information:
|
||
Setting this to a value that is not a Held Job on the
|
||
system or is a Private Held Job returns <ErrUnsupValue>.
|
||
To delete a private Held Job, you must use the PML object
|
||
HELD-JOB-PRINT with a quantity of 0 and supply the correct
|
||
HELD-JOB-PIN with the request. (See HELD-JOB-PRINT)"
|
||
::= { held-job-control 2 }
|
||
|
||
|
||
held-job-set-queue-size OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Sets the maximum number of jobs which can be stored in the held
|
||
job list.
|
||
Additional information:
|
||
Sets the size of the temporary job lists queue."
|
||
::= { held-job-control 3 }
|
||
|
||
|
||
held-job-enable OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eDisabled(1),
|
||
eEnabled(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Enables or disables Job Retention (Job Hold). The valid values
|
||
are eDisabled and eEnabled. (Specifying an invalid mode causes
|
||
an <badValue> error to be returned.) When
|
||
eDisabled is specified all Job Retention (Hold, Proof, Store,
|
||
PIN Printing) is disabled. When eEnabled is specified, the Job
|
||
Retention characteristics of a given job are defined by the PJL
|
||
variable SET HOLD.
|
||
Additional information:
|
||
When disabled, held jobs are not removed,
|
||
but must be explicitly removed through the Control Panel
|
||
or the PML object HELD-JOB-DELETE."
|
||
::= { held-job-control 4 }
|
||
|
||
|
||
mopy-mode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eStandard(4),
|
||
eEnhanced(5)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Controls or reports how mopies are generated. eOff turns off
|
||
the mopy feature. eAuto allows the device to determine the best
|
||
method for generating mopies based on the device configuration.
|
||
eStandard spools the I/O data and replays the I/O data multiple
|
||
times to generate the mopies. eEnhanced spools the rasterized
|
||
page images and replays the rasterized data to generate the
|
||
mopies. Typically, the rasterized data will be larger and will
|
||
allow all but the first mopy to print at speed. If the job
|
||
being mopied is not extremely complex, then the first mopy will
|
||
print at speed also."
|
||
::= { settings-spooler 1 }
|
||
|
||
|
||
|
||
|
||
direct-connect-ports-enable OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eFalse(1),
|
||
eTrue(2),
|
||
eUnSupported(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This object specifies whether all direct connect ports
|
||
(parallel and USB) are available or ignored. JetDirect,
|
||
embedded network connectivity, and third party add-on cards
|
||
(such as Firewire) will be unaffected by setting this object."
|
||
::= { settings-system 43 }
|
||
|
||
|
||
mio1-model-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns product information identifying the I/O card. Example:
|
||
XXXX."
|
||
::= { mio1 2 }
|
||
|
||
|
||
mio1-manufacturing-info OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns information describing the manufacture of the I/O card
|
||
installed in MIO/EIO slot 1. May include serial number and
|
||
firmware revision.
|
||
Additional information:
|
||
The format of the string returned is determined by
|
||
the manufacturer of the EIO device. There is no standard for
|
||
content of the string."
|
||
::= { mio1 3 }
|
||
|
||
|
||
mio1-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eUnknown(2),
|
||
eDiskDrive(8),
|
||
eIOCard(12)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in
|
||
MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the
|
||
enumerations."
|
||
::= { mio1 4 }
|
||
|
||
|
||
mio1-ip-address OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object will return the IP Address of the I/O cards present
|
||
in the available slots of a printer. Laserjet 4700 MFP supports 2 slots
|
||
and a Embedded Jet Direct Card. Slot 4 corresponds to the
|
||
Embedded Jet Direct Card. If there is no I/O card in a
|
||
particular slot, then a NULL value will be returned."
|
||
::= { mio1 6 }
|
||
|
||
|
||
mio4-model-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns product information identifying the I/O card. Example:
|
||
XXXX.
|
||
Additional information:
|
||
Returns a string describing the firmware version of
|
||
the embedded JDI LAN card."
|
||
::= { mio4 2 }
|
||
|
||
|
||
mio4-manufacturing-info OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns information describing the manufacture of the I/O card
|
||
installed in MIO/EIO interface 4. May include serial number and
|
||
firmware revision.
|
||
Additional information:
|
||
Returns a string describing the embedded JDI LAN card."
|
||
::= { mio4 3 }
|
||
|
||
|
||
mio4-type OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eEmpty(1),
|
||
eIOCard(12)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns an indication of the type of option installed in
|
||
MIO/EIO interface 4. See SIMM1-TYPE for an explanation of the
|
||
enumerations.
|
||
Additional information:
|
||
Returns eEmpty if the embedded JDI LAN
|
||
card is disabled. Returns eIOCard if the embedded
|
||
JDI LAN card is enabled."
|
||
::= { mio4 4 }
|
||
|
||
|
||
mio4-ip-address OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object will return the IP Address of the I/O cards present
|
||
in the available slots of a printer. Laserjet 4700 MFP supports 2 slots
|
||
and a Embedded Jet Direct Card. Slot 4 corresponds to the
|
||
Embedded Jet Direct Card. If there is no I/O card in a
|
||
particular slot, then a NULL value will be returned."
|
||
::= { mio4 6 }
|
||
|
||
|
||
usb-host-supported OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eFalse(1),
|
||
eTrue(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The USB Host protocol is supported by the device when the value
|
||
returned is eTrue. The USB Host protocol is not supported when
|
||
the value returned is eFalse."
|
||
::= { usb-interface 1 }
|
||
|
||
|
||
usb-serial-number OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the serial number of a connected USB device as defined
|
||
in the Standard Device Descriptor of the Universal Serial Bus
|
||
Specification Version 2.0."
|
||
::= { usb 1 }
|
||
|
||
|
||
usb-manufacturer-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the description of the manufacturer of a connected USB
|
||
device as defined in the Standard Device Descriptor of the
|
||
Universal Serial Bus Specification Version 2.0."
|
||
::= { usb 2 }
|
||
|
||
|
||
usb-product-description OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the product description of a connected USB device as
|
||
defined in the Standard Device Descriptor of the Universal
|
||
Serial Bus Specification Version 2.0."
|
||
::= { usb 3 }
|
||
|
||
|
||
usb-vendor-id OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the Vendor ID of a connected USB device as defined in
|
||
the Standard Device Descriptor of the Universal Serial Bus
|
||
Specification Version 2.0. The value will be in the range
|
||
0..65535."
|
||
::= { usb 4 }
|
||
|
||
|
||
usb-product-id OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the Product ID of a connected USB device as defined in
|
||
the Standard Device Descriptor of the Universal Serial Bus
|
||
Specification Version 2.0. The value will be in the range
|
||
0..65535."
|
||
::= { usb 5 }
|
||
|
||
|
||
usb-device-kind OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eUSBStorageDevice(1),
|
||
eUSBNonStorageDevice(2),
|
||
eUSBCompositeDevice(3),
|
||
eUSBUnsupportedDevice(4)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The USB-DEVICE-KIND object classifies a USB device into one of
|
||
four broad categories: \
|
||
eUSBStorageDevice(1): The USB device is strictly a device
|
||
for storing data. \
|
||
eUSBNonStorageDevice(2): The USB device has no storage
|
||
capability (e.g., a card reader). \
|
||
eUSBCompositeDevice(3): The USB device has storage
|
||
capability and additional functionality normally not
|
||
associated with a storage device. \
|
||
eUSBUnsupportedDevice(4): The USB device was detected, but no
|
||
driver exists for the device or the device draws more current
|
||
than allowed. \"
|
||
::= { usb 6 }
|
||
|
||
|
||
usb-driver-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns the name of the low-level USB driver supporting this
|
||
device."
|
||
::= { usb 7 }
|
||
|
||
|
||
io-timeout OBJECT-TYPE
|
||
SYNTAX INTEGER(5..300)
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "The amount of time, in seconds, to wait for more print job data
|
||
to be received before an I/O timeout occurs. The I/O channel
|
||
being timed is the I/O channel that received the data
|
||
associated with the current print job. If an I/O timeout
|
||
occurs, the PDL processing sub-system assumes all the data
|
||
associated with the current print job has been received, and
|
||
processes the end of job in a PDL specific manner. The POS
|
||
specifies the supported values.
|
||
Additional information:
|
||
If an I/O timeout occurs,the PDL processing
|
||
sub-system will consider it an end of job condition only
|
||
if there is data from another I/O subsystem waiting to be
|
||
processed.
|
||
The supported values are 5 to 300 seconds.
|
||
Setting to a value outside the supported range returns
|
||
<noError> status and the
|
||
value will be snapped to the nearest supported value."
|
||
::= { settings-io 1 }
|
||
|
||
|
||
io-switch OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eYes(1)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Indicates if the device will switch between I/O channels when a
|
||
job boundary is encountered and print job data is available on
|
||
another I/O channel."
|
||
::= { settings-io 2 }
|
||
|
||
|
||
port1-parallel-speed OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eSlow(1),
|
||
eFast(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the maximum parallel I/O port speed, for
|
||
port 1. This object is only supported if this port is a
|
||
parallel port. An eSlow setting causes a 10 us busy pulse per
|
||
received byte of data. An eFast setting causes a 1.5 us busy
|
||
pulse per received byte of data. In rare cases, setting this
|
||
value to eFast can cause the parallel port to no longer
|
||
transfer data reliably.
|
||
Additional information:
|
||
When the value of this object is changed, it takes
|
||
effect immediately. It is recommended that the printer
|
||
be offline and not in a job when this object is changed."
|
||
::= { port1 4 }
|
||
|
||
|
||
port1-parallel-bidirectionality OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eUnidirectional(1),
|
||
eBidirectional(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes whether the parallel I/O port supports
|
||
bidirectional communication for port 1. This object is only
|
||
supported if this port is a parallel port.
|
||
Additional information:
|
||
A get on this object returns the current mode
|
||
for the parallel port. Setting this object specifies whether
|
||
or not bidirectional communications will be allowed."
|
||
::= { port1 5 }
|
||
|
||
|
||
channelnumberofchannels OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "An indication of how many print data channels the I/O card
|
||
supports.
|
||
Additional information:
|
||
This object is used by the IIO card to tell the peripheral
|
||
firmware how many logical channels will be used by the card.
|
||
This object can only be set once per physical channel. If
|
||
an attempt is made to set it a subsequent time it is ignored
|
||
and an return code of <ErrorActionCanNotBePerformedNow.is returned.
|
||
|
||
If new firmware is dynamically downloaded to the Blazers Plus
|
||
card, and if that firmware uses more logical channels, it is
|
||
necessary to reset the printer."
|
||
::= { channel 1 }
|
||
|
||
rpc-bind-protocol-address OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Array of Berkeley sockets style protocol addresses used to bind
|
||
RPC to a communications protocol family. Setting an instance of
|
||
this array object to a zero length binary value disables the
|
||
transport protocol indicated by that instance. All multi-bytes
|
||
fields are in network (or big-endian) order. Bytes 1 and 2
|
||
indicate the transport protocol. Some of the transport protocol
|
||
mapping information can be found in RFC 1010 Assigned Numbers.
|
||
A list of interesting transport protocol number mappings
|
||
include:
|
||
<table>
|
||
Protocol | Number
|
||
---------+-------
|
||
UDP/IP | 17
|
||
IPX | 1000
|
||
MLC | 4660
|
||
</table>
|
||
Bytes 3 and 4 indicate the address family. The address
|
||
family uses the same mapping as the BSD sockets address
|
||
family. A list of interesting address family mappings
|
||
include:
|
||
<table>
|
||
Address Family | Number
|
||
---------------+-------
|
||
Internet | 2
|
||
NetWare | 6
|
||
MLC | 22136
|
||
</table>
|
||
The format the fifth and following bytes is dependent on the
|
||
address family. For the Internet address family, bytes 5 and 6
|
||
contain the port number, bytes 7 through 10 contain the IP
|
||
address, and the following eight bytes are unused. For NetWare,
|
||
bytes 5 through 8 are the network number, bytes 9 through 14
|
||
are the node number, and bytes 15 and 16 are the socket
|
||
number.
|
||
Additional information:
|
||
The length of the binary value is zero
|
||
if the instance of an object in the rpc-bind-protocol-address
|
||
array is not in use.
|
||
Returns <noSuchName>
|
||
status if attempting to access this object and there
|
||
is no storage device is installed."
|
||
::= { settings-rpc 2 }
|
||
|
||
|
||
rpc-bound-protocol-address OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "An array of Berkeley sockets style protocol addresses that the
|
||
NFS service has been bound to successful. The format is that
|
||
same as the array of RPC-BIND-PROTOCOL-ADDRESS of objects.
|
||
Additional information:
|
||
Returns <noSuchName>
|
||
status if attempting to access this object and there
|
||
is no storage device is installed."
|
||
::= { status-rpc 3 }
|
||
|
||
|
||
|
||
file-system-max-open-files OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "The number of open files allowed at one time. Opening a file
|
||
when the maximum number of files are currently open will fail.
|
||
Additional information:
|
||
Indicates the number of open files a
|
||
personality (e.g. PCL or PostScript) is guaranteed to be
|
||
able to open before the file system runs out of file handles.
|
||
This object is between 1 and 500.
|
||
Returns <noSuchName>
|
||
status if attempting to access this object and there
|
||
is no storage device is installed."
|
||
::= { settings-file-system 2 }
|
||
|
||
|
||
file-system-set-system-partition-writeable OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "This object allows the system partition to be written to. It
|
||
consists of a C structure containing the following fields:
|
||
typedef struct {
|
||
ubyte <<hidden>>[8];
|
||
ubyte volumenumber;
|
||
} fs_writeable_system_partition_t;
|
||
which is described below:
|
||
Bytes 0 - 7: contain the <<hidden>>
|
||
Byte 8 : is the volume number
|
||
Access to this command is controlled by the <<hidden>>. If the
|
||
<<hidden>> supplied is incorrect the command will fail. The
|
||
volumenumber is a volume number of an existing system
|
||
partition.
|
||
Additional information:
|
||
Returns <noSuchName>
|
||
status if attempting to access this object and there
|
||
is no storage device is installed.
|
||
Returns <badValue> if the <<hidden>> is incorrect or if
|
||
the volume requested is not present."
|
||
::= { settings-file-system 6 }
|
||
|
||
|
||
file-system-set-system-partition-readonly OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Changes a system partition to be READ-ONLY. The value is the
|
||
volume number to change. If the volume number specified is NOT
|
||
a system partition an error is returned.
|
||
Additional information:
|
||
Returns <noSuchName>
|
||
status if attempting to access this object and there
|
||
is no storage device is installed.
|
||
Returns <badValue> if the volume requested
|
||
is not present."
|
||
::= { settings-file-system 7 }
|
||
|
||
|
||
file-system-delete-files OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Setting this object causes the specified filename to be
|
||
deleted, after first validating that the authentication data is
|
||
correct for the specified user ID.
|
||
The format for this object is a C structure:
|
||
typedef struct {
|
||
sint32 UserId;
|
||
uint16 AuthenticationDataLen
|
||
ubyte AuthenticationData[]
|
||
char Filename[];
|
||
} fs_delete_files_t;
|
||
which is described below:
|
||
Bytes 0 - 3: contains a user id represented as a multi-byte
|
||
value that is stored in big-endian format, where the
|
||
most significant byte occurs first.
|
||
Bytes 4 - 5 : Length of the Athentication data that follows
|
||
starting at offset 6. Stored as a multi-byte value that
|
||
is stored in big-endian format, where the most
|
||
significant byte occurs first.
|
||
Bytes 6 - 6+AuthenticationDataLen : a ubyte array
|
||
containing the Authentication data used to verify
|
||
access for this operation.
|
||
Bytes starting at offset (6+AuthenticationDataLen+1): A
|
||
null terminated character array representing the ASCII
|
||
file name to be deleted. The length of the string will
|
||
be limited by the remaining space in the object.
|
||
This string represents a fully-qualified path name which may
|
||
specify a filename or a regular expression that may match
|
||
multiple files (e.g <path>/*.exe). Access to this command is
|
||
controlled by the UserId and the authentication data. If the
|
||
UserID or authentication data supplied is incorrect the command
|
||
will fail. The device POS will specify any limitations to the
|
||
length of the filename string, what constitutes a correct user
|
||
ID, what constitutes correct authentication data, and the
|
||
significance of any return values.
|
||
Additional information:
|
||
Setting this object causes the specified filename
|
||
to be deleted, after first validating that the
|
||
authentication data is correct for the specified
|
||
user ID. This object is always present.
|
||
|
||
The format for this object is a C structure:
|
||
|
||
typedef struct {
|
||
sint32 UserId;
|
||
uint16 AuthenticationDataLen
|
||
ubyte AuthenticationData[]
|
||
char Filename[];
|
||
} fs_delete_files_t;
|
||
|
||
Bytes 0 - 3: contains a user id represented
|
||
as a multi-byte value that is stored in big-endian
|
||
format, where the most significant byte occurs first.
|
||
|
||
Bytes 4 - 5 : Length of the authentication data that
|
||
follows starting at offset 6. Stored as a multi-byte
|
||
value that is stored in big-endian format, where the
|
||
most significant byte occurs first.
|
||
|
||
Bytes 6 - 6+AuthenticationDataLen : a ubyte array
|
||
containing the authentication data used to verify
|
||
access for this operation.
|
||
|
||
Bytes starting at offset (6+AuthenticationDataLen+1):
|
||
A null terminated character array representing the
|
||
ASCII file name to be deleted. The length of the
|
||
string will be limited by the remaining space in the
|
||
object. This string represents a fully-qualified path
|
||
name which may specify a filename or a file-type regular
|
||
expression that may match multiple files (e.g.,
|
||
<path>/*.exe).
|
||
|
||
Access to this command is controlled by the UserId
|
||
and the authentication data. If the UserID or
|
||
authentication data supplied is incorrect the
|
||
command will fail.
|
||
|
||
The device POS will specify any limitations to the
|
||
length of the filename string, what constitutes a
|
||
correct user ID, what constitutes correct
|
||
authentication data, and the significance of any
|
||
return values."
|
||
::= { settings-file-system 8 }
|
||
|
||
|
||
file-system2-initialize-volume OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eInitializing(2)
|
||
}
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Setting this object to eInitializing causes file system 2 to be
|
||
initialized. Reading this object indicates if the file system
|
||
is currently being initialized.
|
||
Additional information:
|
||
The hrDeviceIndex value for the mass storage
|
||
device is the same value that is used to index into the
|
||
FILE-SYSTEM sub-tree. Since this product supports
|
||
up to 3 physical mass storage device, and since the hrDeviceIndex
|
||
for the mass storage devices will start at 2 if the mass
|
||
storage device is installed, the FILE-SYSTEM2-INITIALIZE-VOLUME
|
||
object will be the object that allows the mass storage device to be
|
||
initialized that is the 1st device."
|
||
::= { file-system2 6 }
|
||
|
||
|
||
file-system3-initialize-volume OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eInitializing(2)
|
||
}
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Setting this object to eInitializing causes file system 3 to be
|
||
initialized. Reading this object indicates if the file system
|
||
is currently being initialized.
|
||
Additional information:
|
||
The hrDeviceIndex value for the mass storage
|
||
device is the same value that is used to index into the
|
||
FILE-SYSTEM sub-tree. Since this product supports
|
||
up to 3 physical mass storage device, and since the hrDeviceIndex
|
||
for the mass storage devices will start at 2 if the mass
|
||
storage device is installed, the FILE-SYSTEM3-INITIALIZE-VOLUME
|
||
object will be the object that allows the mass storage device to be
|
||
initialized that is the 2nd device."
|
||
::= { file-system3 6 }
|
||
|
||
|
||
file-system4-initialize-volume OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eInitializing(2)
|
||
}
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Setting this object to eInitializing causes file system 4 to be
|
||
initialized. Reading this object indicates if the file system
|
||
is currently being initialized.
|
||
Additional information:
|
||
The hrDeviceIndex value for the mass storage
|
||
device is the same value that is used to index into the
|
||
FILE-SYSTEM sub-tree. Since this product supports
|
||
up to 3 physical mass storage devices, and since the hrDeviceIndex
|
||
for the mass storage devices will start at 2 if the mass
|
||
storage device is installed, the FILE-SYSTEM4-INITIALIZE-VOLUME
|
||
object will be the object that allows the mass storage device to be
|
||
initialized that is the 3rd device."
|
||
::= { file-system4 6 }
|
||
|
||
|
||
mass-storage-resource-change-counter OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "A counter which changes when a mass storage based resource has
|
||
been added or deleted.
|
||
Additional information:
|
||
The value of this counter changes
|
||
each time the MASS-STORAGE-RESOURCE-CHANGED object
|
||
is set to eTrue. The value also changes when the
|
||
mass storage device is initialized. However, the value does not
|
||
change when a mass storage device is removed and a different
|
||
mass storage device is installed. Initializing all volumes sets
|
||
this object back to the factory default value. A reboot sets
|
||
this object back to the factory devalut value.
|
||
Returns <noSuchName>
|
||
status if attempting to access this object and there
|
||
is no storage device is installed."
|
||
::= { mass-storage-resources 1 }
|
||
|
||
|
||
mass-storage-resource-changed OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eTrue(2)
|
||
}
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "Setting to eTrue causes MASS-STORAGE-RESOURCE-CHANGE-COUNTER to
|
||
be incremented.
|
||
Additional information:
|
||
Returns <noSuchName>
|
||
status if attempting to access this object and there
|
||
is no storage device is installed."
|
||
::= { mass-storage-resources 2 }
|
||
|
||
|
||
ram-disk-mode OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eAuto(3)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or controls RAM disk support. eOFF turns off the RAM
|
||
disk functionality. eOn turns on the RAM disk functionality and
|
||
creates a RAM disk whose size is controlled by the
|
||
RAM-DISK-SIZE object. eAuto turns on the RAM disk functionality
|
||
and creates a RAM disk size determined by the printer based on
|
||
installed options and other memory related settings.
|
||
Additional information:
|
||
Returns or controls RAM disk support. eOFF turns off
|
||
the RAM disk functionality. eAuto turns on
|
||
the RAM disk functionality and creates a RAM disk size
|
||
determined by the printer based on the amount of installed
|
||
memory."
|
||
::= { settings-mass-storage-bd 1 }
|
||
|
||
|
||
ram-disk-size OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Returns or controls the size of the RAM disk. The device POS
|
||
specifies the minimum memory requirements. The object
|
||
MAXIMUM-RAM-DISK-MEMORY specifies the maximum memory available
|
||
for the RAM disk.
|
||
Additional information:
|
||
Returns the size of the RAM disk."
|
||
::= { settings-mass-storage-bd 2 }
|
||
|
||
|
||
maximum-ram-disk-memory OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object's name is misleading. This object does not return
|
||
the maximum configurable RAM disk size. Instead, it returns the
|
||
maximum amount of memory, in bytes, that can used to increase
|
||
the size of the RAM disk.
|
||
Additional information:
|
||
This object returns the maximum amount of additional
|
||
memory that is available for increasing the size of the RAM
|
||
disk."
|
||
::= { status-mass-storage-bd 1 }
|
||
|
||
|
||
color-supply-out-action OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eStop(1),
|
||
eAutoContinueBlack(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This PML object can be used to change the behavior of the
|
||
printer when a Color Cartridge reaches OUT. When this PML
|
||
Object is set to eStop, the printer will be offline when a
|
||
Color Cartridge reaches OUT. When this PML object is set to
|
||
eAutoContinueBlack, then the printer will continue printing in
|
||
Mono provided the Black cartridge has not reached OUT.
|
||
Additional information:
|
||
This corresponds to the menu setting 'Color Supply Out'.This
|
||
object can be changed by the control panel or by the PJL
|
||
variable. It can have any of the following enumerated values-
|
||
eStop(1), eAutoContinueBlack(2). "
|
||
::= { settings-system 34 }
|
||
|
||
|
||
control-panel-supplies-status-message OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eShow(1),
|
||
eDontShow(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This PML object can be used to enable or disable supplies
|
||
status messages from being displayed on the control panel.
|
||
eShow - show the status messages on the control panel.
|
||
eDontShow - do not show the status messages on the control
|
||
panel.
|
||
Additional information:
|
||
. This PML Object can be used to enable or disable the supplies
|
||
status messages from being displayed on the control panel.
|
||
eShow Show the status messages on the control panel.
|
||
eDontShow Do not show the status messages on the control panel."
|
||
::= { settings-system 44 }
|
||
|
||
|
||
configurable-low-threshold-setting OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100)
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This PML object can be used to configure the low threshold for
|
||
supplies.
|
||
Additional information:
|
||
This PML object can be used to configure the Low Threshold for Supplies."
|
||
::= { settings-prt-eng 24 }
|
||
|
||
|
||
supplies-replace-action-at-setting OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eStopAtLow(1),
|
||
eStopAtOut(2),
|
||
eOverrideAtOut(4)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This object can be used to change the setting of menu item
|
||
REPLACE SUPPLIES. The behavior of the printer when a supply
|
||
reaches low changes in accordance with the setting of this PML
|
||
Object. If the option eStopAtLow is selected printer will stop
|
||
when a supply reaches LOW. If the option eStopAtOut is selected
|
||
then printer will stop when a supply reaches OUT. If the
|
||
options eStopAtMaxLife (supported only on Mono products) is
|
||
selected, the printer will continue past supply OUT. If the
|
||
option eOverrideAtOut or eOverrideAtOut2 (supported only on
|
||
Color products) is selected then printer will continue past OUT
|
||
in override mode. This option is not writeable. That is using
|
||
this PML object the setting could be changed to any option
|
||
other than eOverrideAtOut and eOverrideAtOut2.
|
||
Additional information:
|
||
This PML object can be used to change the setting of the menu
|
||
item REPLACE SUPPLIES. The behavior of the printer when a supply
|
||
hits low changes in accordance with the setting of this PML Object.
|
||
1. eStopAtLow - Printer will stop when a supply reaches low.
|
||
2. eStopAtOut - Printer will stop when a supply reaches out.
|
||
3. eOverrideAtOut[Read-only, Color Products] - Printer will continue
|
||
print past out in override mode."
|
||
::= { settings-prt-eng 25 }
|
||
|
||
|
||
supply-out-user-configured-override-limit OBJECT-TYPE
|
||
SYNTAX INTEGER(0..100000)
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This PML object reports the user configured cartridge out
|
||
override page limit.
|
||
Additional information:
|
||
This PML object reports the user configured cartridge out override
|
||
limit."
|
||
::= { settings-prt-eng 26 }
|
||
|
||
|
||
cartridge-out-override-control OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS write-only
|
||
STATUS optional
|
||
DESCRIPTION "This PML object is used to control Cartridge Out Override
|
||
feature.
|
||
Additional information:
|
||
This object is used for the following purposes:
|
||
1. Enable/disable cartridge out override through
|
||
SUPPLIES_REPLACE_ACTION_AT_PML Object.
|
||
2. Enable/disable Toner Out Limit: When toner out limit is disabled
|
||
using this PML Object, engine will not be taken offline when a
|
||
cartridge reaches toner out. Engine will continue to print and will
|
||
be in Override mode until other limits are reached.
|
||
3. Enable/disable CRG R&D Limit: When CRG R&D limit is disabled
|
||
using this PML Object, engine will not be taken offline when CRG
|
||
R&D limit for printing in override is reached for any out cartridge.
|
||
Engine will continue to print and will be in Override mode until
|
||
other limits are reached."
|
||
::= { settings-prt-eng 27 }
|
||
|
||
|
||
supply-out-user-configured-override2-limit OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This PML object reports the user configured consumable out
|
||
override level two page limit.
|
||
Additional information:
|
||
This PML object reports the user configured consumable out
|
||
override level two page limit."
|
||
::= { settings-prt-eng 33 }
|
||
|
||
|
||
supply-out-action-support OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to determine if a particular capability
|
||
that allows printing to continue after one or more cartridge
|
||
has reached out is supported by the device. The collection bits
|
||
include: cSupplyOutOverride - indicates that continuing to
|
||
print with an out supply in use is supported.
|
||
cMonochromePrintingAfterColorCartridgeOut - indicates that
|
||
continuing to print in monochrome after a color cartridge is
|
||
out is supported. cPrintingToMaxLife - indicates that printing
|
||
until 'max life' is reached is supported [monochrome only].
|
||
Additional information:
|
||
This object is used to determine what capabilities are supported
|
||
by the device for allowing printing to continue after one or more
|
||
cartridges have reached out. The collection bits include:
|
||
cCartridgeOutOverride - indicates that continuing to print with
|
||
an out cartridge in use is supported.
|
||
cMonochromePrintingAfterColorCartridgeOut - indicates that
|
||
continuing to print with monochrome after a color cartridge is
|
||
out is supported."
|
||
::= { status-prt-eng 48 }
|
||
|
||
|
||
supply-out-device-state OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eNoSupplyOut(1),
|
||
eOffline(2),
|
||
eCartridgeOutOverride(3),
|
||
eMonochromePrintingAfterColorCartridgeOut(4)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This PML object indicates the current behavior of the device if
|
||
one or more supplies have reached out. If no supply has reached
|
||
out, the value of this PML object is eNoSupplyOut. If one or
|
||
more supplies have reached out, the value of this PML object
|
||
will indicate if the printer is online and if so what mode is
|
||
being used to continue printing.
|
||
Additional information:
|
||
This object indicates the current behavior of the device if one
|
||
or more supplies have reached out. The enums represent:
|
||
eNoSupplyOut - No supplies have reached out.
|
||
eOffline - Printer is offline since one or more supplies have
|
||
reached out.
|
||
eCartridgeOutOverride - The cartridge override out is active.
|
||
eMonochromePrintingAfterColorCartridgeOut - Monochrome printing
|
||
after a color cartridge out is active."
|
||
::= { status-prt-eng 49 }
|
||
|
||
|
||
supply-after-out-state OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to read and write the various status flags
|
||
indicating whether the consumable was used after out. The
|
||
collection bits supported include:
|
||
cNotUsedAfterOut - indicates the consumable was not used in
|
||
any capacity after out. If cUsedAfterOutInOverrideMode
|
||
or cUsedAfterOutInMonoPrintingAfterColorOutMode is set,
|
||
this flag will not be set.
|
||
cInstalledWhileInOverrideMode - indicates the consumable
|
||
was installed while Supply Out Override was activated.
|
||
|
||
cUsedAfterOutInOverrideMode - indicates the consumable was
|
||
used after out while Supply Out Override was activated.
|
||
|
||
cInstalledWhileInMonoPrintingAfterColorOutMode - indicates
|
||
the consumable was installed while MPACCO was
|
||
activated.
|
||
cUsedAfterOutInMonoPrintingAfterColorOutMode - indicates
|
||
the consumable was used after out while MPACCO was
|
||
activated.
|
||
Additional information:
|
||
This object is used to read the various status flags indicating
|
||
whether the consumable was used after out. The collection bits include:
|
||
cNotUsedAfterOut - indicates the consumable is not used after out.
|
||
cUsedAfterOutInOverrideMode - indicates the consumable was used
|
||
after out while cartridge out override was actiavted.
|
||
cInstalledWhileInMonoPrintingAfterColorOutMode - indicates that
|
||
the consumable was installed while MPACCO was activated.
|
||
cUsedAfterOutInMonoPrintingAfterColorOutMode - indicates that the
|
||
consumable was after out while MPACCO was activated."
|
||
::= { status-prt-eng 50 }
|
||
|
||
|
||
consumable-status-page-count-b5-executive OBJECT-TYPE
|
||
SYNTAX INTEGER(0..65535)
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to report the number of pages that have
|
||
been printed by this consumable that are of the specified media
|
||
size - B5 or Executive.
|
||
Additional information:
|
||
This object will only exist for Authentic HP consumables.
|
||
If the cartridge is deemed to be NonHP, then this object
|
||
will not exist."
|
||
::= { consumable-status 13 }
|
||
|
||
|
||
consumable-status-web-service-access-data OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to report Web Service Access Data.
|
||
Additional information:
|
||
This object is used to report Web Service Access Data."
|
||
::= { consumable-status 75 }
|
||
|
||
|
||
consumable-status-web-service-access-control OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to report data that controls how web
|
||
service access is enabled.
|
||
Additional information:
|
||
This object is used to report data that controls how web service access is enabled."
|
||
::= { consumable-status 76 }
|
||
|
||
|
||
consumable-string-information OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..287))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to read and write the string value that
|
||
describes the consumable information."
|
||
::= { consumable-string 1 }
|
||
|
||
|
||
consumable-string-information-reset OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
ePresetToNVRAM(1)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to reset (set back to factory default) or
|
||
read the current status of the corresponding information
|
||
string. When Set to eResetToDefault, this object can be used to
|
||
reset the corresponding information object back to its factory
|
||
default value. Setting this object with an enumerated value of
|
||
eCustomized has no effect. When a Get operation is performed on
|
||
this object it will return a value eResetToDefault if still set
|
||
to its factory value. It will return eCustomized if the
|
||
corresponding information value has been set to a custom
|
||
value.
|
||
Additional information:
|
||
This object returns ePresetToNVRAM(1) if CONSUMABLE-STRING-INFORMATION is currently set to the default string. It will return eCustomized(2) otherwise. However, we can explicitly set this object only to ePresetToNVRAM(1) and not eCustomized(2)."
|
||
::= { consumable-string 2 }
|
||
|
||
|
||
consumable-reorder-url OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE(0..64))
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to read and write the URL that can be used
|
||
to reorder consumables for this device. This URL is set at the
|
||
factory but can be updated by a reseller or third party.
|
||
Additional information:
|
||
The URL can be up to 64 characters long."
|
||
::= { consumables 2 }
|
||
|
||
|
||
consumable-current-state OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This PML object returns the current state of the particular
|
||
consumable.
|
||
cAuthLevel1 - Consumable is at Authentication Level 1
|
||
cAuthLevel2 - Consumable is at Authentication Level 2
|
||
cAuthLevel3 - Consumable is at Authentication Level 3
|
||
cAuthLevel4 - Consumable is at Authentication Level 4
|
||
cAuthLevel5 - Consumable is at Authentication Level 5
|
||
cGenuineHPUnsupported - Cartridge is GenuineHP intended for
|
||
another product
|
||
cDefectiveMemory - Cartridge has a defective memory tag
|
||
cMissingMemory - Memory tag is missing from the cartridge
|
||
|
||
cLowCondition - Consumable has reached the engine low
|
||
threshold
|
||
cOutCondition - Consumable has reached its out threshold
|
||
cIncorrect - Cartridge inserted is not the correct one
|
||
cMissing - Consumable is missing from the printer
|
||
cConfigurableLow - Consumable has reached the configurable
|
||
low threshold value
|
||
cStatusArevalid - The status reported on other bits are
|
||
valid only if the bit is set to 1. If it is 0, the
|
||
values are invalid.
|
||
cExpired - Is the cartridge expired, which is determined
|
||
by the formatter.
|
||
cFailure - Cartridge has failed determined by the engine.
|
||
|
||
cLeak - Cartridge has a leak as determined by the engine.
|
||
|
||
cUnknownManufacturer - the brand of the cartridge is
|
||
unknown as determined by the engine.
|
||
cUnsupported --- Cartridge is not supported as determined
|
||
|
||
by the engine.
|
||
These are the possible states and whenever the consumable is in
|
||
any of these states, the appropriate bit will be set. The
|
||
cLowCondition will be set when the consumable reaches the
|
||
engine low threshold, and cConfigurableLow will be set when the
|
||
consumable reaches the Configurable Low threshold value. For
|
||
non-cartridge supplies only cLowCondition, cOutCondition, and
|
||
cMissing will be supported.
|
||
Additional information:
|
||
This object returns the current state of the particular consumable.
|
||
cAuthLevel1 - Consumable is at Authentication Level 1
|
||
cAuthLevel2 - Consumable is at Authentication Level 2
|
||
cAuthLevel3 - Consumable is at Authentication Level 3
|
||
cAuthLevel4 - Consumable is at Authentication Level 4
|
||
cGenuineHPUnsupported - Cartridge is GenuineHP intended for another product
|
||
cDefectiveMemory - Cartridge has a Defective Memory
|
||
cMissingMemory - Memory is Missing from the Cartridge
|
||
cLowCondition - Consumable has reached its low threshold
|
||
cOutCondition - Consumable has reached its out threshold
|
||
cIncorrect - Cartridge inserted is not the correct one
|
||
cMissing - Consumable is Missing from the Printer
|
||
cStatusAreValid - The Status reported on other bits are valid only if
|
||
this bit is set to 1. If it is 0, the values are invalid.
|
||
These are the possible states and whenever a Consumable is in any of these
|
||
states, the appropriate bit will be set. For Non Cartridge Supplies only
|
||
cLowCondition, cOutCondition and cMissing will be supported."
|
||
::= { consumables 7 }
|
||
|
||
|
||
consumable-notification-status OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to read and write the various status flags
|
||
supported by this consumable. For Laserjet 4700 MFP the collection bits
|
||
supported include:
|
||
cClient1ReorderNotificationSent - indicates whether EWS
|
||
(Embedded Web Server) has already sent the reorder
|
||
notification e-mail for this consumable. This bit can
|
||
be both read and written.
|
||
cClient2ReorderNotificationSent - indicates whether WJA
|
||
(Web Jet Admin) has already sent the reorder
|
||
notification e-mail for this consumable. This bit can
|
||
be both read and written.
|
||
cClient3ReorderNotificationSent - for future implementation
|
||
|
||
cClient4ReorderNotificationSent - for future implementation
|
||
|
||
cClient5ReorderNotificationSent - for future implementation
|
||
|
||
cClient1ReplaceNotificationSent - indicates whether EWS
|
||
(Embedded Web Server) has already sent the replace
|
||
notification e-mail for this consumable. This bit can
|
||
be both read and written.
|
||
cClient2ReplaceNotificationSent - indicates whether WJA
|
||
(Web Jet Admin) has already sent the replace
|
||
notification e-mail for this consumable. This bit can
|
||
be both read and written.
|
||
cClient3ReplaceNotificationSent - for future implementation
|
||
|
||
cClient4ReplaceNotificationSent - for future implementation
|
||
|
||
cClient5ReplaceNotificationSent - for future implementation
|
||
|
||
Additional information:
|
||
If the cartridge is deemed to be NonHP, then this object will not exist.
|
||
This object will have 1 sub arrays for the consumable.
|
||
The client1 and 2 currently are assingned to EWS and WJA the remaining client are
|
||
reserved for the future third party pml tools. A client is requiered to set only his assigned
|
||
bit for reorder or replace notification. A client using other client's bit for reorder replace
|
||
will result in the other client being not able to set the notification.
|
||
Ex: For EWS ReOrderNotification it will send 0x00010000 and
|
||
For EWS ReplaceNotification it will send 0x00000001
|
||
For WJA ReOrderNotification it will send 0x00020000 and
|
||
For WJA ReplaceNotification it will send 0x00000002"
|
||
::= { consumables 10 }
|
||
|
||
|
||
consumable-pages-printed-with-supply OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This PML object returns the number of pages printed with a
|
||
cartridge consumable. This PML object returns the value that
|
||
should be displayed under 'Pages Printed With This Supply' for
|
||
cartridges in color products.
|
||
Additional information:
|
||
This PML object returns the number of pages printed with a Cartridge
|
||
Consumable. This PML object returns the value that should be displayed under
|
||
Pages Printed With This Supply for Cartridges in Color products."
|
||
::= { consumables 11 }
|
||
|
||
|
||
supply-override-activated-level OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eHasNotBeenActivated(1),
|
||
eLevel01(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This PML object indicates the last override activation level
|
||
for a given supply.
|
||
Additional information:
|
||
This PML object indicates the last override activation level for a given supply."
|
||
::= { consumables 12 }
|
||
|
||
|
||
supply-override-activated-pagecount OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object reports the printer<65>s historical page count at
|
||
which the last override activation occurred for a given
|
||
supply.
|
||
Additional information:
|
||
This object reports the printers historical page count at which the last override
|
||
activation occurred for a given supply."
|
||
::= { consumables 13 }
|
||
|
||
|
||
supply-override-activated-date OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object reports the date when the last override activation
|
||
occurred for a given supply.
|
||
Additional information:
|
||
This object reports the date when the last override activation occurred for a given supply."
|
||
::= { consumables 14 }
|
||
|
||
|
||
consumable-life-usage-units-remaining OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object reports the current estimate of the number of usage
|
||
units that remain before this supply is depleted. An installed
|
||
supply that cannot report such a number will return a value of
|
||
-2. It is the reponsibility of the host application to query
|
||
each supply in order to determine an overall device
|
||
USAGE-UNITS-REMAINING number - the lowest value returned. The
|
||
unit of measure for this life estimate is determined by reading
|
||
the corresponding CONSUMABLE-LIFE-USAGE-UNITS object.
|
||
Additional information:
|
||
This object will return the Pages or Estimated Pages remaining for
|
||
the speciffic supply requested by the leaf node of this object."
|
||
::= { consumables-life 1 }
|
||
|
||
|
||
consumable-life-usage-units OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
ePagesRemaining(1),
|
||
eEstimatedPagesRemaining(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object reports current usage units in use by the
|
||
corresponding CONSUMABLE-LIFE-USAGE-UNITS-REMAINING object.
|
||
Additional information:
|
||
This object returns the units that CONSUMABLE-LIFE-USAGE-UNITS-REMAINING
|
||
is returned in. Either ePagesRemaining(1) or eEstimatedPagesRemaining(2)."
|
||
::= { consumables-life 2 }
|
||
|
||
|
||
consumable-life-low-threshold OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to report and modify a threshold value
|
||
indicating the point in the life of a consumable or supply at
|
||
which a transition to a LOW state will occur."
|
||
::= { consumables-life 3 }
|
||
|
||
|
||
printer-average-marking-agent-units-per-gram OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to read the marking agent units of measure
|
||
per gram. This is typically a conversion factor for converting
|
||
pixels of toner to grams. This pixels-per-gram value is used to
|
||
calculate the estimated number of pages remaining for a given
|
||
marking agent."
|
||
::= { printer-average 4 }
|
||
|
||
|
||
printer-average-marking-agent-coverage-actual OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object is used to read the actual average marking agent
|
||
coverage for a given color plane. It is a real number that
|
||
represents percent coverage and will read from 0 to 100%. This
|
||
object will return the same value as
|
||
PRINTER-AVERAGE-MARKING-AGENT-COVERAGE except under certain
|
||
conditions which will be specified in the device POS."
|
||
::= { printer-average 5 }
|
||
|
||
|
||
|
||
|
||
default-vertical-black-resolution OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the value of the default vertical black
|
||
resolution. The units are dots per inch.
|
||
Additional information:
|
||
In $product_str changing this OID also causes
|
||
DEFAULT-HORIZONTAL-BLACK RESOLUTION to change.
|
||
DEFAULT-HORIZONTAL-BLACK-RESOLUTION and
|
||
DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the
|
||
same. The supported values are:
|
||
LaserJet 4100: 300, 600, 1200
|
||
Color Products: 600
|
||
LaserJet 9000: 300, 600
|
||
Setting to an unsupported value causes the printer
|
||
to substitute in a snap value and
|
||
to return <noError> status.
|
||
The snap values are as follow:
|
||
LaserJet 4100:
|
||
|
||
450 >= n < 900 snaps to 600
|
||
n >= 900 snaps to 1200
|
||
Color Products:
|
||
n snaps to 600
|
||
LaserJet 9000:
|
||
n < 450 snaps to 300
|
||
n >=450 snaps to 600 "
|
||
::= { settings-pdl 8 }
|
||
|
||
|
||
default-horizontal-black-resolution OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the value of the default horizontal black
|
||
resolution. The units are dots per inch.
|
||
Additional information:
|
||
In $product_str changing this object also causes
|
||
DEFAULT-VERTICAL-BLACK RESOLUTION to change.
|
||
DEFAULT-HORIZONTAL-BLACK-RESOLUTION and
|
||
DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the
|
||
same. The supported values are:
|
||
LaserJet 4100: 300, 600, 1200
|
||
Color Products: 600
|
||
LaserJet 9000: 300, 600
|
||
Setting to an unsupported value causes the printer
|
||
to substitute in a snap value and to
|
||
return <noError> status.
|
||
The snap values are as follow:
|
||
LaserJet 4100:
|
||
n < 450 snaps to 300
|
||
450 >= n < 900 snaps to 600
|
||
n >= 900 snaps to 1200
|
||
Color Products:
|
||
n snaps to 600
|
||
LaserJet 9000:
|
||
n < 450 snaps to 300
|
||
n >=450 snaps to 600 "
|
||
::= { settings-pdl 9 }
|
||
|
||
|
||
default-page-protect OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOn(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the default page protection behavior. If
|
||
eOff, the device does not reserve memory for holding the entire
|
||
raster form of a processed page. If eOn, then memory is
|
||
reserved. If eAuto, the device determines the amount of memory
|
||
to reserve.
|
||
Additional information:
|
||
Setting to eOn causes MET to be more conservative, but
|
||
it will not allocate memory to hold an entire
|
||
rasterized page."
|
||
::= { settings-pdl 10 }
|
||
|
||
|
||
default-bits-per-pixel OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Controls the number of levels used (per pixel) when printing
|
||
grayscale or color images."
|
||
::= { settings-pdl 39 }
|
||
|
||
|
||
default-ret OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eLight(2),
|
||
eMedium(3),
|
||
eDark(4),
|
||
eNotSet(5)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Returns or changes the Resolution Enhancement Technology
|
||
setting. Devices that only support eOff and eOn should map all
|
||
other values to eOn and always return the same non-eOff value
|
||
to indicate on. The list of supported values should be
|
||
documented in the device POS.
|
||
Additional information:
|
||
Setting this object may cause a status of <noError> to be
|
||
returned, but the new value will not take effect until a job
|
||
boundary is reached. If a get is done on object before the job
|
||
boundary is reached, the value last set will be returned.
|
||
The value of this object is saved over a powercycle.
|
||
This object exists on monochrome printers only."
|
||
::= { imaging 5 }
|
||
|
||
|
||
web-server-security OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Each collection bit represents a device or Embedded Web Server
|
||
feature that can be enabled or disabled via this object."
|
||
::= { settings-webserver 3 }
|
||
|
||
|
||
firmware-download-write-status-supported OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eFalse(1),
|
||
eTrue(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object provides information on whether the printer has the
|
||
ability to communicate the write-status of the firmware
|
||
download while the download is taking place."
|
||
::= { firmware-download 1 }
|
||
|
||
|
||
firmware-download-write-time OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "If the design of the firmware-download implementation does not
|
||
allow PML interaction during the download process, this value
|
||
provides an estimation of the time where the printer will not
|
||
be able to engage in PML communication.
|
||
Additional information:
|
||
If the design of the firmware-download
|
||
implementation does not allow PML interaction during
|
||
the download process, this value provides an
|
||
estimation of the time where the printer will not be
|
||
able to engage in PML communication. The calculated
|
||
time is expected to be 140 secs. However, this time
|
||
may increase as high as 280 secs as the flash part
|
||
nears the maximum flash count."
|
||
::= { firmware-download 2 }
|
||
|
||
|
||
firmware-download-write-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Tells the number of times that firmware has been downloaded to
|
||
the flash part.
|
||
Additional information:
|
||
Tells the number of times that firmware has been
|
||
downloaded to the flash part. The default value will
|
||
vary depending on how many times the firmware is
|
||
rolled before shipping."
|
||
::= { firmware-download 3 }
|
||
|
||
|
||
firmware-download-current-state OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eIdle(1),
|
||
eReceivingImage(2),
|
||
eReceivedImageError(3),
|
||
eVerifyingImage(4),
|
||
eVerifiedImageError(5),
|
||
eWritingImage(6),
|
||
eWritingImageError(7),
|
||
eDownloadComplete(8),
|
||
eOKtoShutDown(9),
|
||
eCancelDownload(10),
|
||
eShuttingDown(11)
|
||
}
|
||
ACCESS read-write
|
||
STATUS optional
|
||
DESCRIPTION "Provides the current or last reportable state of the firmware
|
||
download process. The current state may not necessarily be the
|
||
current state, but could be the post-mortem state."
|
||
::= { firmware-download 4 }
|
||
|
||
|
||
firmware-download-maximum-write-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Reports the manufacturer specified number of times that
|
||
firmware can be downloaded to the flash part. A value of -1
|
||
means that there is no limit. A value of 0 means that
|
||
downloading firmware is not permitted by this part. Any other
|
||
positive integer value corresponds to the number of times that
|
||
firmware can be downloaded to the flash part.
|
||
Additional information:
|
||
Reports the manufacturer specified number of
|
||
times that firmware can be downloaded to the flash
|
||
part. A value of -1 means that there is no limit.
|
||
A value of 0 means that downloading firmware is not
|
||
permitted by this part. Any other positive integer
|
||
value corresponds to the number of times that
|
||
firmware can be downloaded to the flash part. The
|
||
current maximum write count is 500. This may change
|
||
as flash technology evolves."
|
||
::= { firmware-download 5 }
|
||
|
||
|
||
firmware-download-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "This returns the name of the printer. This should match the
|
||
name in the header of the upgrade image being sent to the flash
|
||
part. If the name does not match with the name returned then
|
||
the image that we are attempting to download does not upgrade
|
||
the printer firmware.
|
||
Additional information:
|
||
This object returns the HP name of the printer.
|
||
This should match what is in the PJL header of the RFU job
|
||
Web Jet Admin uses this to ensure the printer is available
|
||
to be upgraded."
|
||
::= { firmware-download 6 }
|
||
|
||
|
||
firmware-download-version OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "This object will return a string value representing the current
|
||
revision of firmware that the printer is operating with. This
|
||
is used to determine if code needs to be upgraded when an
|
||
firmware bundle comes in, in an upgrade job.
|
||
Additional information:
|
||
Web Jet Admin uses the version string that is returned to
|
||
determine what peices of an RFU bundle need to be upgraded
|
||
when an RFU job is being built. This objects will return
|
||
the version string of the printer."
|
||
::= { firmware-download 7 }
|
||
|
||
|
||
upgradable-devices-write-status-supported OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eFalse(1),
|
||
eTrue(2)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "This object provides information on whether the upgradable
|
||
device has the ability to communicate the write-status of the
|
||
upgrade while the upgrade is taking place."
|
||
::= { upgradable-devices 1 }
|
||
|
||
|
||
upgradable-devices-write-time OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "If the design of the device upgrade implementation does not
|
||
allow PML interaction during the download process, this value
|
||
provides an estimation of the time where the device will not be
|
||
able to engage in PML communication. The time returned will
|
||
depend upon what device is attempting to be upgraded."
|
||
::= { upgradable-devices 2 }
|
||
|
||
|
||
upgradable-devices-write-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Tells the number of times that firmware for device X has been
|
||
downloaded to the flash part. The default value will vary
|
||
depending on how many times the firmware is rolled before
|
||
shipping."
|
||
::= { upgradable-devices 3 }
|
||
|
||
|
||
upgradable-devices-current-state OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eIdle(1),
|
||
eReceivedImage(2),
|
||
eReceivedImageError(3),
|
||
eVerifiedImage(4),
|
||
eVerifiedImageError(5),
|
||
eWritingImage(6),
|
||
eWritingImageError(7),
|
||
eUpgradeComplete(8),
|
||
eUpgradeSkipped(9)
|
||
}
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Provides the current or last reportable state of the device
|
||
upgrade process. The current state may not necessarily be the
|
||
current state, but could be the post-mortem state."
|
||
::= { upgradable-devices 4 }
|
||
|
||
|
||
upgradable-devices-max-write-count OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
ACCESS read-only
|
||
STATUS optional
|
||
DESCRIPTION "Reports the manufacturer specified number of times that
|
||
firmware for device X can be downloaded to the flash part. A
|
||
value of -1 means that there is no limit. A value of 0 means
|
||
that downloading firmware is not permitted by this part. Any
|
||
other positive integer value corresponds to the number of times
|
||
that the firmware for device X can be downloaded to the flash
|
||
part. The current maximum write count is 500. This may change
|
||
as flash technology evolves."
|
||
::= { upgradable-devices 5 }
|
||
|
||
|
||
upgradable-devices-name OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "This returns the name of the upgradable device. This should
|
||
match the name in the header of the upgrade image being sent to
|
||
the flash part. If the name does not match with any of the
|
||
names returned then the device that we are attempting to
|
||
upgrade is unavailable for upgrading.
|
||
Additional information:
|
||
This object returns the HP name of the printer and the upgradable
|
||
devices. There is one Name object per upgradable device.
|
||
This should match what is in the PJL header of the RFU job
|
||
Web Jet Admin uses this to ensure the printer or device is
|
||
available to be upgraded."
|
||
::= { upgradable-devices 6 }
|
||
|
||
|
||
upgradable-devices-version OBJECT-TYPE
|
||
SYNTAX OCTET STRING
|
||
ACCESS read-only
|
||
STATUS mandatory
|
||
DESCRIPTION "This object will return a string value representing the current
|
||
revision of firmware that device X is operating with. This is
|
||
used to determine if code needs to be upgraded when a firmware
|
||
bundle comes in, in an upgrade job.
|
||
Additional information:
|
||
Web Jet Admin uses the version string that is returned to
|
||
determine what peices of an RFU bundle need to be upgraded
|
||
when an RFU job is being built. This internal object will
|
||
return the current version string of the printer or device
|
||
that it corresponds to."
|
||
::= { upgradable-devices 7 }
|
||
|
||
|
||
remote-upgrade-enable OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
eOff(1),
|
||
eOn(2)
|
||
}
|
||
ACCESS read-write
|
||
STATUS mandatory
|
||
DESCRIPTION "Enables or disables the ability to upgrade the firmware
|
||
associated with any device that is available to be upgraded.
|
||
This will be set to on or off at the RFU level in that if this
|
||
mode is on any available device can be upgraded and if this
|
||
mode is off none of the devices can be upgraded. There is not
|
||
an individual mode for each device. Trying to set this to a
|
||
value other than eOn or eOff will cause an UnsupportedValue
|
||
error to occur."
|
||
::= { upgradable-devices 8 }
|
||
|
||
|
||
END
|