Observium_CE/mibs/hp/HPN-ICF-VOICE-CALL-HISTORY-MIB

501 lines
19 KiB
Plaintext

-- ==========================================================================
-- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
--
-- Description: The purpose of this MIB file is to provide the definition of
-- voice call record.
-- Reference:
-- Version: V1.1
-- History:
-- V1.0 2008-02-17 Initial version, created by Tian Xiaoqiang, Qu Jin
-- V1.1 2009-12-09 Add g729br8 to "HpnicfCodecType", Wang Tong
-- ==========================================================================
HPN-ICF-VOICE-CALL-HISTORY-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, Integer32, Gauge32
FROM SNMPv2-SMI
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
InterfaceIndexOrZero
FROM IF-MIB
AbsoluteCounter32
FROM DIAL-CONTROL-MIB
TEXTUAL-CONVENTION, DisplayString, TimeStamp
FROM SNMPv2-TC
hpnicfVoice
FROM HPN-ICF-OID-MIB;
hpnicfVoCallHistory MODULE-IDENTITY
LAST-UPDATED "200802170000Z"
ORGANIZATION
""
CONTACT-INFO
""
DESCRIPTION
"This MIB file is to provide the definition of voice call
history record information."
REVISION "200802170000Z"
DESCRIPTION
"The initial version of this MIB file."
::= { hpnicfVoice 16 }
-- ======================================
-- Type declaration
-- ======================================
HpnicfGUid ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a global call identifier. The global call identifier is
used as a unique identifier for an end-to-end call. A zero length
HpnicfGUid indicates no value for the global call identifier."
SYNTAX OCTET STRING(SIZE(0..16))
HpnicfCodecType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of Codec."
SYNTAX INTEGER
{
g711a(1),
g711u(2),
g723r53(3),
g723r63(4),
g729r8(5),
g729a(6),
g726r16(7),
g726r24(8),
g726r32(9),
g726r40(10),
unknown(11),
g729br8(12)
}
hpnicfVoiceCallHistoryObjects OBJECT IDENTIFIER ::= { hpnicfVoCallHistory 1 }
-- ===========================================================================
-- hpnicfCallHistoryTable
-- ===========================================================================
-- callHistoryTable
-- Table to store the past call information. The destination number
-- and the call connect and disconnect time, and the disconnection
-- cause are stored. These calls could be circuit switched or virtual
-- circuits. History of each and every call is stored, of successful
-- calls as well as of unsuccessful and rejected calls. An entry will
-- be created when a call is cleared.
hpnicfCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpnicfCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about specific
calls to a specific destination."
::= { hpnicfVoiceCallHistoryObjects 1 }
hpnicfCallHistoryEntry OBJECT-TYPE
SYNTAX HpnicfCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single connection."
INDEX { hpnicfCallHistoryIndex }
::= { hpnicfCallHistoryTable 1 }
HpnicfCallHistoryEntry ::=
SEQUENCE {
hpnicfCallHistoryIndex Integer32,
hpnicfCallHistorySetupTime TimeStamp,
hpnicfCallHistoryConnectTime TimeStamp,
hpnicfCallHistoryTerminateTime TimeStamp,
hpnicfCallHistoryPeerAddress DisplayString,
hpnicfCallHistoryPeerId Integer32,
hpnicfCallHistoryLogicalIfIndex InterfaceIndexOrZero,
hpnicfCallHistoryCallOrigin INTEGER,
hpnicfCallHistoryChargedUnits AbsoluteCounter32,
hpnicfCallHistoryInfoType INTEGER,
hpnicfCallHistoryTransmitPackets AbsoluteCounter32,
hpnicfCallHistoryTransmitBytes AbsoluteCounter32,
hpnicfCallHistoryReceivePackets AbsoluteCounter32,
hpnicfCallHistoryReceiveBytes AbsoluteCounter32
}
hpnicfCallHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the call history table. It's a monotonically
increasing integer for the sole purpose of indexing call
disconnection events. When it reaches to the maximum value,
the value will back to 1."
::= { hpnicfCallHistoryEntry 1 }
hpnicfCallHistorySetupTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was started."
::= { hpnicfCallHistoryEntry 2 }
hpnicfCallHistoryConnectTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was connected.
If the call is not connected, this object will have a
value of zero."
::= { hpnicfCallHistoryEntry 3 }
hpnicfCallHistoryTerminateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the call was terminated."
::= { hpnicfCallHistoryEntry 4 }
hpnicfCallHistoryPeerAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number this call was connected to. If the number is
not available, it will have a length of zero."
::= { hpnicfCallHistoryEntry 5 }
hpnicfCallHistoryPeerId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies a single peer. This is the Id value
of the peer table entry to which this call was made. If a
peer table entry for this call does not exist or is unknown,
the value of this object will be zero."
::= { hpnicfCallHistoryEntry 6 }
hpnicfCallHistoryLogicalIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the ifIndex value of the logical interface through
which this call was made. For ISDN media, this would be
the ifIndex of the B channel which was used for this call.
If the ifIndex value is unknown, the value of this object
will be zero."
::= { hpnicfCallHistoryEntry 7 }
hpnicfCallHistoryCallOrigin OBJECT-TYPE
SYNTAX INTEGER {
originate(1),
answer(2),
callback(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call origin.
originate The call that is initiated.
answer The call that is accepted.
callback Either rejects the call and then calls back,
or uses the 'Reverse charging' information
element if it is available. Note that callback(3)
is supposed to control charging, not security,
and applies to callback prior to accepting a call.
Callback for security reasons can be handled using
PPP callback."
::= { hpnicfCallHistoryEntry 8 }
hpnicfCallHistoryChargedUnits OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero."
::= { hpnicfCallHistoryEntry 9 }
hpnicfCallHistoryInfoType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
speech(2),
unrestrictedDigital(3),
unrestrictedDigital56(4),
restrictedDigital(5),
audio31(6),
audio7(7),
video(8),
packetSwitched(9),
fax(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The information type for this call.
other E.g. for non-isdn media.
speech Speech.
unrestrictedDigital Unrestricted digital information
with 64k rate adaption.
unrestrictedDigital56 Unrestricted digital information
with 56k rate adaption.
restrictedDigital Restricted digital information.
audio31 3.1 kHz audio.
audio7 7 kHz audio.
video Video.
packetSwitched Packetswitch.
fax Fax."
::= { hpnicfCallHistoryEntry 10 }
hpnicfCallHistoryTransmitPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which were transmitted while this
call was active."
::= { hpnicfCallHistoryEntry 11 }
hpnicfCallHistoryTransmitBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes which were transmitted for this call."
::= { hpnicfCallHistoryEntry 12 }
hpnicfCallHistoryReceivePackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which were received for this call."
::= { hpnicfCallHistoryEntry 13 }
hpnicfCallHistoryReceiveBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes which were received for this call."
::= { hpnicfCallHistoryEntry 14 }
-- ===========================================================================
-- hpnicfVoiceCallHistoryTable
-- ===========================================================================
hpnicfVoiceCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpnicfVoiceCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the voice extension to the call history table
of DIAL-CONTROL-MIB. It contains voice encapsulation call
leg information that is derived from the statistics of lower
layer telephony interface."
::= { hpnicfVoiceCallHistoryObjects 2 }
hpnicfVoiceCallHistoryEntry OBJECT-TYPE
SYNTAX HpnicfVoiceCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a extended voice call history information."
INDEX { hpnicfCallHistoryIndex }
::= { hpnicfVoiceCallHistoryTable 1 }
HpnicfVoiceCallHistoryEntry ::= SEQUENCE {
hpnicfVoCallHistoryConnectionId HpnicfGUid,
hpnicfVoCallHistoryTxDuration Gauge32,
hpnicfVoCallHistoryVoiceTxDuration Gauge32,
hpnicfVoCallHistoryFaxTxDuration Gauge32,
hpnicfVoCallHistoryCoderType HpnicfCodecType,
hpnicfVoCallHistoryImgPageCount Gauge32
}
hpnicfVoCallHistoryConnectionId OBJECT-TYPE
SYNTAX HpnicfGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier of circuit switched network for
the gateway call."
::= { hpnicfVoiceCallHistoryEntry 1 }
hpnicfVoCallHistoryTxDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of transmit path open from this peer to the
voice gateway for the call. The units is milliseconds."
::= { hpnicfVoiceCallHistoryEntry 2 }
hpnicfVoCallHistoryVoiceTxDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice transmitted from this peer to voice
gateway for this call. The voice utilization rate can be
obtained by dividing this by hpnicfVoCallHistoryTxDuration object.
The units is milliseconds."
::= { hpnicfVoiceCallHistoryEntry 3 }
hpnicfVoCallHistoryFaxTxDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of fax transmitted from this peer to voice gateway
for this call. The fax utilization rate can be obtained by
dividing this by hpnicfVoCallHistoryTxDuration object. The units
is milliseconds."
::= { hpnicfVoiceCallHistoryEntry 4 }
hpnicfVoCallHistoryCoderType OBJECT-TYPE
SYNTAX HpnicfCodecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder type. It specifies the encode type to
the PSTN leg of a call."
::= { hpnicfVoiceCallHistoryEntry 5 }
hpnicfVoCallHistoryImgPageCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fax related image pages are received or
transmitted via the peer for the call. The units is page."
::= { hpnicfVoiceCallHistoryEntry 6 }
-- ===========================================================================
-- hpnicfVoiceVoIPCallHistoryTable
-- ===========================================================================
hpnicfVoiceVoIPCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpnicfVoiceVoIPCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the VoIP extension to the call active table of
DIAL-CONTROL-MIB. It contains VoIP call leg information about
specific VoIP call destination."
::= { hpnicfVoiceCallHistoryObjects 3 }
hpnicfVoiceVoIPCallHistoryEntry OBJECT-TYPE
SYNTAX HpnicfVoiceVoIPCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a extended VoIP call history
information."
INDEX {hpnicfCallHistoryIndex }
::= { hpnicfVoiceVoIPCallHistoryTable 1 }
HpnicfVoiceVoIPCallHistoryEntry ::= SEQUENCE {
hpnicfVoVoIPCallHistoryConnectionId HpnicfGUid,
hpnicfVoVoIPCallHistoryRemSigIPType InetAddressType,
hpnicfVoVoIPCallHistoryRemSigIPAddr InetAddress,
hpnicfVoVoIPCallHistoryRemSigPort Integer32,
hpnicfVoVoIPCallHistoryRemMedIPType InetAddressType,
hpnicfVoVoIPCallHistoryRemMedIPAddr InetAddress,
hpnicfVoVoIPCallHistoryRemMedPort Integer32,
hpnicfVoVoIPCallHistorySessProtocol INTEGER,
hpnicfVoVoIPCallHistoryCoderType HpnicfCodecType
}
hpnicfVoVoIPCallHistoryConnectionId OBJECT-TYPE
SYNTAX HpnicfGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier of packet-switched network for the
gateway call."
::= { hpnicfVoiceVoIPCallHistoryEntry 1 }
hpnicfVoVoIPCallHistoryRemSigIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of remote system signalling IP address for the VoIP call."
::= { hpnicfVoiceVoIPCallHistoryEntry 2 }
hpnicfVoVoIPCallHistoryRemSigIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system signalling IP address for the VoIP call."
::= { hpnicfVoiceVoIPCallHistoryEntry 3 }
hpnicfVoVoIPCallHistoryRemSigPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener signalling port to which to
transmit voice packets."
::= { hpnicfVoiceVoIPCallHistoryEntry 4 }
hpnicfVoVoIPCallHistoryRemMedIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of remote system media IP address for the VoIP call."
::= { hpnicfVoiceVoIPCallHistoryEntry 5 }
hpnicfVoVoIPCallHistoryRemMedIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system media IP address for the VoIP call."
::= { hpnicfVoiceVoIPCallHistoryEntry 6 }
hpnicfVoVoIPCallHistoryRemMedPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener media port to which to transmit voice
packets."
::= { hpnicfVoiceVoIPCallHistoryEntry 7 }
hpnicfVoVoIPCallHistorySessProtocol OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
h323(2),
sip(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the session protocol to be used for internet
call between local and remote router via IP backbone.
unknown The protocol is unknown.
h323 The protocol is H323.
sip The protocol is session initiation."
::= { hpnicfVoiceVoIPCallHistoryEntry 8 }
hpnicfVoVoIPCallHistoryCoderType OBJECT-TYPE
SYNTAX HpnicfCodecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder type. It specifies the encode type to the
VoIP leg of a call."
::= { hpnicfVoiceVoIPCallHistoryEntry 9 }
END