1409 lines
44 KiB
Plaintext
1409 lines
44 KiB
Plaintext
-- ==========================================================================
|
|
-- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
|
|
--
|
|
-- Description: The purpose of this MIB file is to provide object definition
|
|
-- of WLAN radio resource management (RRM).
|
|
-- Reference:
|
|
-- Version: V1.8
|
|
-- History:
|
|
-- V1.0 2008-07-16 Initial version, created by ChenWei
|
|
-- V1.1 2009-04-16 modified by WangChunsheng
|
|
-- Add new table of hpnicfDot11MonitorDetectedDevTable for hpnicfDot11MonitorDetectedGroup.
|
|
-- Add new table of hpnicfDot11RRMAPCfgTable for hpnicfDot11RRMConfigGroup.
|
|
-- V1.2 2009-05-07 modified by Wang Shaojie, wangchunsheng
|
|
-- Add hpnicfDot11APInterfNumThreshhd, hpnicfDot11StaInterfNumThreshhd
|
|
-- to hpnicfDot11GlobeConfigGroup.
|
|
-- Modify hpnicfDot11RRMCfgIntrvl
|
|
-- V1.3 2009-05-07 modified by Wang Shaojie
|
|
-- Add new node hpnicfDot11MonitorDevSNR to hpnicfDot11MonitorDetectedDevTable
|
|
-- V1.4 2010-02-22 modified by Wang Chunsheng
|
|
-- Add new table hpnicfDot11RRMSDRadioGroupTable to hpnicfDot11RRMConfigGroup
|
|
-- 2010-03-18 Modified by Wang Lu
|
|
-- Add hpnicfDot11RRMAPCfg2Table
|
|
-- V1.5 2010-09-21 Modified by wu xiaopeng
|
|
-- Add new node hpnicfDot11RRMCoChlIntfTrapThhd, hpnicfDot11RRMAdjChlIntfTrapThhd
|
|
-- to hpnicfDot11RRMAPCfg2Table
|
|
-- 2011-03-23 Modified by NiuJian
|
|
-- Add new node hpnicfDot11RrmNbrSSID
|
|
-- to hpnicfDot11RRMNbrInfoTable
|
|
-- V1.6 2013-03-23 Modified by GaoFei
|
|
-- Change SYNTAX of hpnicfDot11RRMCfgPERThres,hpnicfDot11RRMCfgToleranceFctr
|
|
-- V1.7 2013-09-02 Modified by Zhang Siyu
|
|
-- Add new table hpnicfDot11RRMRadioNbrInfoTable to hpnicfDot11RRMDetectGroup
|
|
-- 2013-11-19 Modified by wubin
|
|
-- Add new node hpnicfDot11RRM11nMultiCastMcs
|
|
-- to hpnicfDot11RRMGlobalCfgPara
|
|
-- 2013-12-21 Modified by wubin
|
|
-- Add new node hpnicfDot11RRM11acMadtMaxNss, hpnicfDot11RRM11acSuptMaxNss,
|
|
-- hpnicfDot11RRM11acMultiCastNss, hpnicfDot11RRM11acMultiCastVhtMcs
|
|
-- to hpnicfDot11RRMGlobalCfgPara
|
|
-- V1.8 2014-05-07 Modified by yubo
|
|
-- Change SYNTAX of hpnicfDot11RRMCfgIntrfThres.
|
|
-- ==========================================================================
|
|
HPN-ICF-DOT11-RRM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
HpnicfDot11RadioType, HpnicfDot11ChannelScopeType, HpnicfDot11RadioElementIndex,
|
|
HpnicfDot11RadioScopeType, hpnicfDot11APElementIndex
|
|
FROM HPN-ICF-DOT11-REF-MIB
|
|
Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue, MacAddress, DateAndTime, RowStatus
|
|
FROM SNMPv2-TC
|
|
hpnicfDot11,
|
|
HpnicfDot11ObjectIDType,
|
|
HpnicfDot11SSIDStringType
|
|
FROM HPN-ICF-DOT11-REF-MIB;
|
|
|
|
hpnicfDot11RRM MODULE-IDENTITY
|
|
LAST-UPDATED "201009251800Z" -- Sep 25, 2010 at 18:00 GMT
|
|
ORGANIZATION
|
|
""
|
|
CONTACT-INFO
|
|
""
|
|
DESCRIPTION
|
|
"This MIB file is to provide the object definition of
|
|
WLAN radio resource management (RRM)."
|
|
|
|
REVISION "201009251800Z" -- Sep 25, 2010 at 18:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes."
|
|
REVISION "201002231800Z" -- Feb 23, 2010 at 18:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes."
|
|
REVISION "200908012000Z" -- Aug 1, 2009 at 20:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes and new table."
|
|
REVISION "200905072000Z" -- May 7, 2009 at 20:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes and new table."
|
|
REVISION "200904172000Z" -- April 17, 2009 at 20:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new table and new group."
|
|
REVISION "200807141429Z"
|
|
DESCRIPTION
|
|
"The initial revision of this MIB module."
|
|
::= { hpnicfDot11 8 }
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
hpnicfDot11RRMConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11RRM 1 }
|
|
|
|
hpnicfDot11RRMGlobalCfgPara OBJECT IDENTIFIER ::= { hpnicfDot11RRMConfigGroup 1 }
|
|
|
|
hpnicfDot11RRM11nMadtMaxMcs OBJECT-TYPE
|
|
SYNTAX Integer32 (0..76 | 255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the maximum modulation and coding scheme (MCS) index for
|
|
802.11n mandatory rates.
|
|
The value 255 indicates that no maximum MCS index
|
|
is specified. No maximum MCS index is specified for 802.11n
|
|
mandatory rates by default.
|
|
Besides 255, the specified maximum MCS index for 802.11n supported
|
|
rates must be no less than the specified maximum MCS index for 802.11n
|
|
mandatory rates."
|
|
DEFVAL { 255 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 1 }
|
|
|
|
hpnicfDot11RRM11nSuptMaxMcs OBJECT-TYPE
|
|
SYNTAX Integer32 (0..76)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the maximum Modulation and Coding Scheme (MCS) index for
|
|
802.11n supported rates.
|
|
The specified maximum MCS index for 802.11n supported rates must be no
|
|
less than the specified maximum MCS index for 802.11n mandatory rates."
|
|
DEFVAL { 76 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 2 }
|
|
|
|
hpnicfDot11RRM11gProtect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable dot11g protection."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 3 }
|
|
|
|
hpnicfDot11RRM11aPwrConstrt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the power constraint for all 802.11a radios.
|
|
The configured power constraint is advertised in beacons if spectrum
|
|
management is enabled.
|
|
The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER
|
|
is defined by the regulatory domain)."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 4 }
|
|
|
|
hpnicfDot11RRM11aSpectrumManag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable spectrum management for 802.11a radios.
|
|
When spectrum management is enabled, the WLAN sub-system advertises
|
|
power capabilities of the AP and power constraints applicable to all
|
|
devices in the BSS based on regulatory domain specification."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 5 }
|
|
|
|
hpnicfDot11RRMAutoChlAvoid11h OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the auto-channel set as non-dot11h channels, this is,
|
|
only the non-dot11h channels belonging to the country code are scanned
|
|
during initial channel selection and one of them is selected."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 6 }
|
|
|
|
hpnicfDot11RRMScanChl OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
all(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the scan mode.
|
|
auto: When this option is set, all channels of the country code being
|
|
set are scanned.
|
|
all: When this option is set, all the channels of the radio band are
|
|
scanned."
|
|
DEFVAL { auto }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 7 }
|
|
|
|
hpnicfDot11RRMScanRptIntvel OBJECT-TYPE
|
|
SYNTAX Integer32 (5..120)
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the scan report interval."
|
|
DEFVAL { 10 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 8 }
|
|
|
|
hpnicfDot11APInterfNumThreshhd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents threshold of AP interference .
|
|
If the value of AP interference exceeds this threshold,
|
|
AP interference trap will be sent. If the value of this node
|
|
is zero, AP interference trap will be sent immediately."
|
|
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 9 }
|
|
|
|
hpnicfDot11StaInterfNumThreshhd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents threshold of STA interference.
|
|
If the value of STA interference exceeds this threshold,
|
|
STA interference trap will be sent. If the value of this
|
|
node is zero, STA interference trap will be sent immediately.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 10 }
|
|
|
|
hpnicfDot11RRM11nMultiCastMcs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..76 | 4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the modulation and coding scheme (MCS) index for 802.11n
|
|
multicast rates.
|
|
The value 4294967295 indicates that no MCS index is specified.
|
|
No MCS index is specified for 802.11n multicast rates by default.
|
|
Besides 4294967295, the specified MCS index for 802.11n multicast
|
|
rates must be no less than the specified maximum MCS index for 802.11n
|
|
mandatory rates.
|
|
Before configure the MCS index for 802.11n multicast rates, the maximum
|
|
MCS index for 802.11n mandatory rates must be configured"
|
|
DEFVAL { 4294967295 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 11 }
|
|
|
|
hpnicfDot11RRM11acMadtMaxNss OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the maximum NSS index for 802.11ac mandatory rates.
|
|
The value 0 indicates that no maximum NSS index is specified.
|
|
No maximum NSS index is specified for 802.11ac mandatory rates by default.
|
|
The specified maximum NSS index for 802.11ac supported rates must be no less
|
|
than the specified maximum NSS index for 802.11ac mandatory rates."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 12 }
|
|
|
|
hpnicfDot11RRM11acSuptMaxNss OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the maximum NSS index for 802.11ac supported rates.
|
|
The specified maximum NSS index for 802.11ac supported rates must be no
|
|
less than the specified maximum NSS index for 802.11ac mandatory rates."
|
|
DEFVAL { 8 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 13 }
|
|
|
|
hpnicfDot11RRM11acMultiCastNss OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the NSS index for 802.11ac multicast rates.
|
|
The value 0 indicates that no NSS index is specified.
|
|
No NSS index is specified for 802.11ac multicast rates by default.
|
|
The specified NSS index for 802.11ac multicast rates must be no less
|
|
than the specified maximum NSS index for 802.11ac mandatory rates.
|
|
Before configuring the NSS index for 802.11ac multicast rates, the maximum
|
|
NSS index for 802.11ac mandatory rates must be configured.
|
|
Besides, it must be configured together with the node below."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 14 }
|
|
|
|
hpnicfDot11RRM11acMultiCastVhtMcs OBJECT-TYPE
|
|
SYNTAX Integer32 (0..9 | 255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the MCS index for 802.11ac multicast rates.
|
|
The value 255 indicates that no MCS index is specified.
|
|
No MCS index is specified for 802.11ac multicast rates by default.
|
|
Besides, it must be configured together with the node above."
|
|
DEFVAL { 255 }
|
|
::= { hpnicfDot11RRMGlobalCfgPara 15 }
|
|
|
|
hpnicfDot11RRMRadioCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RRMRadioCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure WLAN RRM based radio type.
|
|
When 802.11b parameter is modified, 802.11g parameter will be
|
|
changed at the same time.
|
|
In the same way, when 802.11g parameter is modified, 802.11b parameter
|
|
will be changed at the same time."
|
|
::= { hpnicfDot11RRMConfigGroup 2 }
|
|
|
|
hpnicfDot11RRMRadioCfgEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RRMRadioCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure WLAN RRM based radio type.
|
|
When 802.11b parameter is modified, 802.11g parameter will be
|
|
changed at the same time.
|
|
In the same way, when 802.11g parameter is modified, 802.11b parameter
|
|
will be changed at the same time."
|
|
INDEX { hpnicfDot11RRMRadioType }
|
|
::= { hpnicfDot11RRMRadioCfgTable 1 }
|
|
|
|
HpnicfDot11RRMRadioCfgEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot11RRMRadioType
|
|
HpnicfDot11RadioType,
|
|
hpnicfDot11RRMCfgChlState
|
|
TruthValue,
|
|
hpnicfDot11RRMCfgChlMode
|
|
INTEGER,
|
|
hpnicfDot11RRMChlProntoRadioElmt
|
|
Unsigned32,
|
|
hpnicfDot11RRMCfgPwrState
|
|
TruthValue,
|
|
hpnicfDot11RRMCfgPwrMode
|
|
INTEGER,
|
|
hpnicfDot11RRMPwrProntoRadioElmt
|
|
Unsigned32,
|
|
hpnicfDot11RRMCfgIntrvl
|
|
Integer32,
|
|
hpnicfDot11RRMCfgIntrfThres
|
|
Integer32,
|
|
hpnicfDot11RRMCfgNoiseThres
|
|
Integer32,
|
|
hpnicfDot11RRMCfgPERThres
|
|
Integer32,
|
|
hpnicfDot11RRMCfgToleranceFctr
|
|
Integer32,
|
|
hpnicfDot11RRMCfgAdjacencyFctr
|
|
Integer32
|
|
}
|
|
|
|
hpnicfDot11RRMRadioType OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.11 radio type."
|
|
::= { hpnicfDot11RRMRadioCfgEntry 1 }
|
|
|
|
hpnicfDot11RRMCfgChlState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable dynamic channel selection."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 2 }
|
|
|
|
hpnicfDot11RRMCfgChlMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
selfDecisive(1),
|
|
userTriggered(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the mode of channel selection.
|
|
This node can be configured only when dynamic channel selection
|
|
is enabled."
|
|
DEFVAL { userTriggered }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 3 }
|
|
|
|
hpnicfDot11RRMChlProntoRadioElmt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the AP and radio that will change channel at next
|
|
calibration cycle.
|
|
0 is returned when getting the value of this node.
|
|
This node can be configured only when the mode of channel selection
|
|
control is user-triggered.
|
|
When configuring, the higher 24 bits stand for the AP index,
|
|
and the last 8 bits stand for the radio index.
|
|
4294967295 stand for configuring each radio on all APs."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 4 }
|
|
|
|
hpnicfDot11RRMCfgPwrState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable dynamic power selection for the band."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 5 }
|
|
|
|
hpnicfDot11RRMCfgPwrMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
selfDecisive(1),
|
|
userTriggered(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the mode of transmit power control.
|
|
This node can be configured only when dynamic power selection
|
|
is enabled."
|
|
DEFVAL { userTriggered }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 6 }
|
|
|
|
hpnicfDot11RRMPwrProntoRadioElmt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the AP and radio that will change power at next
|
|
calibration cycle.
|
|
0 is returned when getting the value of this node.
|
|
This node can be configured only when the mode of transmit power
|
|
control is user-triggered.
|
|
When configuring, the higher 24 bits stand for the AP index,
|
|
and the last 8 bits stand for the radio index.
|
|
4294967295 stand for configuring each radio on all APs."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 7 }
|
|
|
|
hpnicfDot11RRMCfgIntrvl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "minute"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the calibration interval."
|
|
DEFVAL { 8 }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 8 }
|
|
|
|
hpnicfDot11RRMCfgIntrfThres OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the interface threshold.
|
|
By default, interference observed on an operating channel is considered
|
|
during dynamic frequency selection and transmit power control. If the
|
|
interference percentage on the channel reaches the set threshold, RRM
|
|
will perform resource adjustment to control the situation."
|
|
DEFVAL { 50 }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 9 }
|
|
|
|
hpnicfDot11RRMCfgNoiseThres OBJECT-TYPE
|
|
SYNTAX Integer32 (-127..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the noise threshold."
|
|
DEFVAL { -70 }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 10 }
|
|
|
|
hpnicfDot11RRMCfgPERThres OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the CRC error threshold.
|
|
If the percentage of CRC errors reaches the threshold, RRM will perform
|
|
resource adjustment to control the situation."
|
|
DEFVAL { 20 }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 11 }
|
|
|
|
hpnicfDot11RRMCfgToleranceFctr OBJECT-TYPE
|
|
SYNTAX Integer32 (1..45)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the tolerance level.
|
|
During dynamic frequency selection (DFS), the channel will be changed
|
|
only if there is a better channel having lesser interference and packet
|
|
error rate than those specified by the user."
|
|
DEFVAL { 20 }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 12 }
|
|
|
|
hpnicfDot11RRMCfgAdjacencyFctr OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the adjacency factor for the band.
|
|
If transmit power control (TPC) is configured, power will be adjusted
|
|
when the nth neighbor is detected. The value n is the adjacency factor."
|
|
DEFVAL { 3 }
|
|
::= { hpnicfDot11RRMRadioCfgEntry 13 }
|
|
|
|
hpnicfDot11RRMAPCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RRMAPCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines the RRM parameters for AP."
|
|
::= { hpnicfDot11RRMConfigGroup 3 }
|
|
|
|
hpnicfDot11RRMAPCfgEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RRMAPCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of RRM parameters for AP."
|
|
INDEX { hpnicfDot11APElementIndex }
|
|
::= { hpnicfDot11RRMAPCfgTable 1 }
|
|
|
|
HpnicfDot11RRMAPCfgEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot11RRMAPWorkMode
|
|
INTEGER
|
|
}
|
|
|
|
hpnicfDot11RRMAPWorkMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
monitor(2),
|
|
hybrid(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP work mode."
|
|
::= { hpnicfDot11RRMAPCfgEntry 1 }
|
|
|
|
hpnicfDot11RRMSDRadioGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RRMSDRadioGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines RRM self-decisive radio group."
|
|
::= { hpnicfDot11RRMConfigGroup 4 }
|
|
|
|
hpnicfDot11RRMSDRadioGroupEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RRMSDRadioGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of one RRM self-decisive radio group."
|
|
INDEX
|
|
{
|
|
hpnicfDot11RRMSDRadioGroupId
|
|
}
|
|
::= { hpnicfDot11RRMSDRadioGroupTable 1 }
|
|
|
|
HpnicfDot11RRMSDRadioGroupEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11RRMSDRadioGroupId Unsigned32,
|
|
hpnicfDot11RRMSDRadioGroupDesc OCTET STRING,
|
|
hpnicfDot11RRMSDRdGrpChlHolddownTm Unsigned32,
|
|
hpnicfDot11RRMSDRdGrpPwrHolddownTm Unsigned32,
|
|
hpnicfDot11RRMSDRdGroupRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11RRMSDRadioGroupId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents RRM self-decisive radio group ID."
|
|
::= { hpnicfDot11RRMSDRadioGroupEntry 1 }
|
|
|
|
hpnicfDot11RRMSDRadioGroupDesc OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the description of RRM self-decisive radio group."
|
|
::= { hpnicfDot11RRMSDRadioGroupEntry 2 }
|
|
|
|
hpnicfDot11RRMSDRdGrpChlHolddownTm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "minute"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the channel holddown time of RRM self-decisive radio group."
|
|
::= { hpnicfDot11RRMSDRadioGroupEntry 3 }
|
|
|
|
hpnicfDot11RRMSDRdGrpPwrHolddownTm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "minute"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the power holddown time of RRM self-decisive radio group."
|
|
::= { hpnicfDot11RRMSDRadioGroupEntry 4 }
|
|
|
|
hpnicfDot11RRMSDRdGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of this table entry."
|
|
::= { hpnicfDot11RRMSDRadioGroupEntry 5 }
|
|
|
|
hpnicfDot11RRMAPCfg2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RRMAPCfg2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines the RRM parameters for AP."
|
|
::= { hpnicfDot11RRMConfigGroup 5 }
|
|
|
|
hpnicfDot11RRMAPCfg2Entry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RRMAPCfg2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of RRM parameters for AP."
|
|
INDEX { hpnicfDot11RRMAPSerialID }
|
|
::= { hpnicfDot11RRMAPCfg2Table 1 }
|
|
|
|
HpnicfDot11RRMAPCfg2Entry ::=
|
|
SEQUENCE {
|
|
hpnicfDot11RRMAPSerialID
|
|
HpnicfDot11ObjectIDType,
|
|
hpnicfDot11RRMAPIntfThreshold
|
|
Integer32,
|
|
hpnicfDot11RRMStaIntfThreshold
|
|
Integer32,
|
|
hpnicfDot11RRMCoChlIntfTrapThhd
|
|
Integer32,
|
|
hpnicfDot11RRMAdjChlIntfTrapThhd
|
|
Integer32
|
|
}
|
|
|
|
hpnicfDot11RRMAPSerialID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ObjectIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial ID of the AP."
|
|
::= { hpnicfDot11RRMAPCfg2Entry 1 }
|
|
|
|
hpnicfDot11RRMAPIntfThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents threshold of AP interference .
|
|
If the number of AP interference exceeds this threshold,
|
|
AP interference trap will be sent."
|
|
::= { hpnicfDot11RRMAPCfg2Entry 2 }
|
|
|
|
hpnicfDot11RRMStaIntfThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents threshold of STA interference.
|
|
If the number of STA interference exceeds this threshold,
|
|
station interference trap will be sent."
|
|
::= { hpnicfDot11RRMAPCfg2Entry 3 }
|
|
|
|
hpnicfDot11RRMCoChlIntfTrapThhd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents threshold of interference trap with current ap.
|
|
If signal strength of the device exceeds this threshold,
|
|
corresponding trap will be sent."
|
|
::= { hpnicfDot11RRMAPCfg2Entry 4 }
|
|
|
|
|
|
hpnicfDot11RRMAdjChlIntfTrapThhd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents threshold of adjacent interference trap with current ap.
|
|
If signal strength of the device exceeds this threshold,
|
|
corresponding trap will be sent."
|
|
::= { hpnicfDot11RRMAPCfg2Entry 5 }
|
|
|
|
hpnicfDot11RRMDetectGroup OBJECT IDENTIFIER ::= { hpnicfDot11RRM 2 }
|
|
|
|
hpnicfDot11RRMChlRptTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RRMChlRptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows the RRM channel information of each radio
|
|
on all APs."
|
|
::= { hpnicfDot11RRMDetectGroup 1 }
|
|
|
|
hpnicfDot11RRMChlRptEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RRMChlRptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of RRM channel information
|
|
of the radio on the AP."
|
|
INDEX { hpnicfDot11RRMRadioIndex, hpnicfDot11RRMChlRptChlNum }
|
|
::= { hpnicfDot11RRMChlRptTable 1 }
|
|
|
|
HpnicfDot11RRMChlRptEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot11RRMRadioIndex
|
|
HpnicfDot11RadioElementIndex,
|
|
hpnicfDot11RRMChlRptChlNum
|
|
Integer32,
|
|
hpnicfDot11RRMChlRptChlType
|
|
INTEGER,
|
|
hpnicfDot11RRMChlRptChlQlty
|
|
INTEGER,
|
|
hpnicfDot11RRMChlRptNbrCnt
|
|
Integer32,
|
|
hpnicfDot11RRMChlRptLoad
|
|
Integer32,
|
|
hpnicfDot11RRMChlRptUtlz
|
|
Integer32,
|
|
hpnicfDot11RRMChlRptIntrf
|
|
Integer32,
|
|
hpnicfDot11RRMChlRptPER
|
|
Integer32,
|
|
hpnicfDot11RRMChlRptRetryRate
|
|
Integer32,
|
|
hpnicfDot11RRMChlRptNoise
|
|
Integer32,
|
|
hpnicfDot11RRMChlRptRadarIndtcr
|
|
INTEGER
|
|
}
|
|
|
|
hpnicfDot11RRMRadioIndex OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioElementIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents index of the radio."
|
|
::= { hpnicfDot11RRMChlRptEntry 1 }
|
|
|
|
hpnicfDot11RRMChlRptChlNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel number."
|
|
::= { hpnicfDot11RRMChlRptEntry 2 }
|
|
|
|
hpnicfDot11RRMChlRptChlType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
primeChannel(1),
|
|
offChannel(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel type."
|
|
::= { hpnicfDot11RRMChlRptEntry 3 }
|
|
|
|
hpnicfDot11RRMChlRptChlQlty OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
good(1),
|
|
bad(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel quality."
|
|
::= { hpnicfDot11RRMChlRptEntry 4 }
|
|
|
|
hpnicfDot11RRMChlRptNbrCnt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of neighbors found on the channel."
|
|
::= { hpnicfDot11RRMChlRptEntry 5 }
|
|
|
|
hpnicfDot11RRMChlRptLoad OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Load observed on the channel in percentage."
|
|
::= { hpnicfDot11RRMChlRptEntry 6 }
|
|
|
|
hpnicfDot11RRMChlRptUtlz OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Utilization of the channel in percentage."
|
|
::= { hpnicfDot11RRMChlRptEntry 7 }
|
|
|
|
hpnicfDot11RRMChlRptIntrf OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interference observed on the channel in percentage."
|
|
::= { hpnicfDot11RRMChlRptEntry 8 }
|
|
|
|
hpnicfDot11RRMChlRptPER OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet error rate observed on the channel in percentage."
|
|
::= { hpnicfDot11RRMChlRptEntry 9 }
|
|
|
|
hpnicfDot11RRMChlRptRetryRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Percentage of retransmission happened on the channel."
|
|
::= { hpnicfDot11RRMChlRptEntry 10 }
|
|
|
|
hpnicfDot11RRMChlRptNoise OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Noise observed on the channel."
|
|
::= { hpnicfDot11RRMChlRptEntry 11 }
|
|
|
|
hpnicfDot11RRMChlRptRadarIndtcr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
detected(1),
|
|
notDetected(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radar detection status."
|
|
::= { hpnicfDot11RRMChlRptEntry 12 }
|
|
|
|
hpnicfDot11RRMNbrInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RRMNbrInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows the RRM neighbor information of each radio
|
|
on all APs."
|
|
::= { hpnicfDot11RRMDetectGroup 2 }
|
|
|
|
hpnicfDot11RRMNbrInfoEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RRMNbrInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of RRM neighbor information
|
|
of the radio on an AP."
|
|
INDEX { hpnicfDot11RRMRadioIndex, hpnicfDot11RrmNbrBSSID }
|
|
::= { hpnicfDot11RRMNbrInfoTable 1 }
|
|
|
|
HpnicfDot11RRMNbrInfoEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot11RrmNbrBSSID
|
|
MacAddress,
|
|
hpnicfDot11RrmNbrChl
|
|
HpnicfDot11ChannelScopeType,
|
|
hpnicfDot11RRMNbrIntrf
|
|
Integer32,
|
|
hpnicfDot11RrmNbrRSSI
|
|
Integer32,
|
|
hpnicfDot11RrmNbrType
|
|
INTEGER,
|
|
hpnicfDot11RrmNbrSSID
|
|
HpnicfDot11SSIDStringType
|
|
}
|
|
|
|
hpnicfDot11RrmNbrBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the AP."
|
|
::= { hpnicfDot11RRMNbrInfoEntry 1 }
|
|
|
|
hpnicfDot11RrmNbrChl OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ChannelScopeType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel number on which the neighbor was found."
|
|
::= { hpnicfDot11RRMNbrInfoEntry 2 }
|
|
|
|
hpnicfDot11RRMNbrIntrf OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interference observed on the channel in percentage by neighbor."
|
|
::= { hpnicfDot11RRMNbrInfoEntry 3 }
|
|
|
|
hpnicfDot11RrmNbrRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal strength of the AP in dBm."
|
|
::= { hpnicfDot11RRMNbrInfoEntry 4 }
|
|
|
|
hpnicfDot11RrmNbrType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
managed(1),
|
|
unmanaged(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the AP, managed or unmanaged."
|
|
::= { hpnicfDot11RRMNbrInfoEntry 5 }
|
|
|
|
hpnicfDot11RrmNbrSSID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11SSIDStringType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SSID of the Neighbor."
|
|
::= { hpnicfDot11RRMNbrInfoEntry 6 }
|
|
|
|
hpnicfDot11RRMHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RRMHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows the details of the latest three channel changes
|
|
and power changes applied on all APs, including time of change,
|
|
reason of the change and the channel, power, interference parameters."
|
|
::= { hpnicfDot11RRMDetectGroup 3 }
|
|
|
|
hpnicfDot11RRMHistoryEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RRMHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry shows the details of channel and power changes."
|
|
INDEX { hpnicfDot11RRMRadioIndex,
|
|
hpnicfDot11RRMHistoryId,
|
|
hpnicfDot11RRMHistoryRecIndctr }
|
|
::= { hpnicfDot11RRMHistoryTable 1 }
|
|
|
|
HpnicfDot11RRMHistoryEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot11RRMHistoryId
|
|
Integer32,
|
|
hpnicfDot11RRMHistoryRecIndctr
|
|
INTEGER,
|
|
hpnicfDot11RRMHistoryChl
|
|
HpnicfDot11ChannelScopeType,
|
|
hpnicfDot11RRMHistoryPwr
|
|
Integer32,
|
|
hpnicfDot11RRMHistoryLoad
|
|
Integer32,
|
|
hpnicfDot11RRMHistoryUtlz
|
|
Integer32,
|
|
hpnicfDot11RRMHistoryIntrf
|
|
Integer32,
|
|
hpnicfDot11RRMHistoryNoise
|
|
Integer32,
|
|
hpnicfDot11RRMHistoryPER
|
|
Integer32,
|
|
hpnicfDot11RRMHistoryRetryRate
|
|
Integer32,
|
|
hpnicfDot11RRMHistoryChgReason
|
|
BITS,
|
|
hpnicfDot11RRMHistoryChgDateTime
|
|
DateAndTime
|
|
}
|
|
|
|
hpnicfDot11RRMHistoryId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"History number of the change."
|
|
::= { hpnicfDot11RRMHistoryEntry 1 }
|
|
|
|
hpnicfDot11RRMHistoryRecIndctr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
before(1),
|
|
after(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"History record type of the change."
|
|
::= { hpnicfDot11RRMHistoryEntry 2 }
|
|
|
|
hpnicfDot11RRMHistoryChl OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ChannelScopeType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel on which the radio operates before/after the change
|
|
of channel or power."
|
|
::= { hpnicfDot11RRMHistoryEntry 3 }
|
|
|
|
hpnicfDot11RRMHistoryPwr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power of the radio before/after the change of channel or
|
|
power."
|
|
::= { hpnicfDot11RRMHistoryEntry 4 }
|
|
|
|
hpnicfDot11RRMHistoryLoad OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Load observed on the radio in percentage before/after the
|
|
change of channel or power."
|
|
::= { hpnicfDot11RRMHistoryEntry 5 }
|
|
|
|
hpnicfDot11RRMHistoryUtlz OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Utilization of the radio in percentage before/after the
|
|
change of channel or power."
|
|
::= { hpnicfDot11RRMHistoryEntry 6 }
|
|
|
|
hpnicfDot11RRMHistoryIntrf OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interference observed on the radio in percentage
|
|
before/after the change of channel or power."
|
|
::= { hpnicfDot11RRMHistoryEntry 7 }
|
|
|
|
hpnicfDot11RRMHistoryNoise OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Noise observed on the radio before/after the change
|
|
of channel or power."
|
|
::= { hpnicfDot11RRMHistoryEntry 8 }
|
|
|
|
hpnicfDot11RRMHistoryPER OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet error rate observed on the radio in percentage
|
|
before/after the change of channel or power."
|
|
::= { hpnicfDot11RRMHistoryEntry 9 }
|
|
|
|
hpnicfDot11RRMHistoryRetryRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Percentage of retransmission happened on the radio
|
|
before/after the change of channel or power."
|
|
::= { hpnicfDot11RRMHistoryEntry 10 }
|
|
|
|
hpnicfDot11RRMHistoryChgReason OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
others(0),
|
|
coverage(1),
|
|
radar(2),
|
|
retransmission(3),
|
|
packetsDiscarded(4),
|
|
interference(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reason for the change of channel or power.
|
|
The various bit positions are:
|
|
|0 |Others |
|
|
|1 |Coverage |
|
|
|2 |Radar |
|
|
|3 |Retransmission |
|
|
|4 |Packets discarded |
|
|
|5 |Interference |
|
|
0 is returned when the history record type is after."
|
|
::= { hpnicfDot11RRMHistoryEntry 11 }
|
|
|
|
hpnicfDot11RRMHistoryChgDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the channel or power change occurred."
|
|
::= { hpnicfDot11RRMHistoryEntry 12 }
|
|
|
|
hpnicfDot11RRMRadioNbrInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RRMRadioNbrInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows the RRM neighbor information of each radio
|
|
on all APs."
|
|
::= { hpnicfDot11RRMDetectGroup 4 }
|
|
|
|
hpnicfDot11RRMRadioNbrInfoEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RRMRadioNbrInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of RRM neighbor information
|
|
of the radio on an AP."
|
|
INDEX { hpnicfDot11RRMRadioNbrAPID, hpnicfDot11RRMRadioNbrRadioID }
|
|
::= { hpnicfDot11RRMRadioNbrInfoTable 1 }
|
|
|
|
HpnicfDot11RRMRadioNbrInfoEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot11RRMRadioNbrAPID
|
|
HpnicfDot11ObjectIDType,
|
|
hpnicfDot11RRMRadioNbrRadioID
|
|
HpnicfDot11RadioScopeType,
|
|
hpnicfDot11RRMRadioNbrSSID
|
|
OCTET STRING
|
|
}
|
|
|
|
hpnicfDot11RRMRadioNbrAPID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ObjectIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP serial id."
|
|
::= { hpnicfDot11RRMRadioNbrInfoEntry 1 }
|
|
|
|
hpnicfDot11RRMRadioNbrRadioID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioScopeType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio Id on AP."
|
|
::= { hpnicfDot11RRMRadioNbrInfoEntry 2 }
|
|
|
|
hpnicfDot11RRMRadioNbrSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All neighbour SSIDs scanned by the selected radio."
|
|
::= { hpnicfDot11RRMRadioNbrInfoEntry 3 }
|
|
|
|
hpnicfDot11RRMNotifyGroup OBJECT IDENTIFIER ::= { hpnicfDot11RRM 3 }
|
|
|
|
hpnicfDot11RRMChlQltyNotifications OBJECT IDENTIFIER ::= { hpnicfDot11RRMNotifyGroup 1 }
|
|
|
|
hpnicfDot11RRMChlQltyNtfPrefix OBJECT IDENTIFIER ::= { hpnicfDot11RRMChlQltyNotifications 0 }
|
|
|
|
hpnicfDot11RRMIntrfLimit NOTIFICATION-TYPE
|
|
OBJECTS { hpnicfDot11RRMChlRptIntrf }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent when interference on the radio
|
|
exceeds the limit."
|
|
::= { hpnicfDot11RRMChlQltyNtfPrefix 1 }
|
|
|
|
hpnicfDot11RRMPERLimit NOTIFICATION-TYPE
|
|
OBJECTS { hpnicfDot11RRMChlRptPER }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent when packet error rate on the
|
|
radio exceeds the limit."
|
|
::= { hpnicfDot11RRMChlQltyNtfPrefix 2 }
|
|
|
|
hpnicfDot11RRMNoiseLimit NOTIFICATION-TYPE
|
|
OBJECTS { hpnicfDot11RRMChlRptNoise }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent when noise on the radio exceeds
|
|
the limit."
|
|
::= { hpnicfDot11RRMChlQltyNtfPrefix 3 }
|
|
|
|
hpnicfDot11RRMResChgNotifications OBJECT IDENTIFIER ::= { hpnicfDot11RRMNotifyGroup 2 }
|
|
|
|
hpnicfDot11RRMResChgNtfPrefix OBJECT IDENTIFIER ::= { hpnicfDot11RRMResChgNotifications 0 }
|
|
|
|
hpnicfDot11RRMPowerChange NOTIFICATION-TYPE
|
|
OBJECTS { hpnicfDot11RRMRadioIndex, hpnicfDot11NewPower, hpnicfDot11OldPower }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent when power changed on the radio
|
|
automatically."
|
|
::= { hpnicfDot11RRMResChgNtfPrefix 1 }
|
|
|
|
hpnicfDot11RRMNotificationsVar OBJECT IDENTIFIER ::= { hpnicfDot11RRMNotifyGroup 3 }
|
|
|
|
hpnicfDot11NewPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power of the radio after the change of power."
|
|
::= { hpnicfDot11RRMNotificationsVar 1 }
|
|
|
|
hpnicfDot11OldPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power of the radio before the change of power."
|
|
::= { hpnicfDot11RRMNotificationsVar 2 }
|
|
|
|
hpnicfDot11MonitorDetectedGroup OBJECT IDENTIFIER ::= { hpnicfDot11RRM 4 }
|
|
|
|
hpnicfDot11MonitorDetectedDevTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11MonitorDetectedDevEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows the devices of AP detected"
|
|
::= { hpnicfDot11MonitorDetectedGroup 1 }
|
|
|
|
hpnicfDot11MonitorDetectedDevEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11MonitorDetectedDevEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of detected devices."
|
|
INDEX
|
|
{
|
|
hpnicfDot11MonitorDevMAC, hpnicfDot11APElementIndex
|
|
}
|
|
::= { hpnicfDot11MonitorDetectedDevTable 1 }
|
|
|
|
HpnicfDot11MonitorDetectedDevEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot11MonitorDevMAC
|
|
MacAddress,
|
|
hpnicfDot11MonitorDevType
|
|
INTEGER,
|
|
hpnicfDot11MonitorDevVendor
|
|
OCTET STRING,
|
|
hpnicfDot11MonitorDevSSID
|
|
OCTET STRING,
|
|
hpnicfDot11MonitorDevBSSID
|
|
MacAddress,
|
|
hpnicfDot11MonitorDevChannel
|
|
HpnicfDot11ChannelScopeType,
|
|
hpnicfDot11MonitorRadioId
|
|
HpnicfDot11RadioScopeType,
|
|
hpnicfDot11MonitorDevMaxRSSI
|
|
Integer32,
|
|
hpnicfDot11MonitorDevBeaconIntvl
|
|
Integer32,
|
|
hpnicfDot11MonitorDevFstDctTime
|
|
DateAndTime,
|
|
hpnicfDot11MonitorDevLstDctTime
|
|
DateAndTime,
|
|
hpnicfDot11MonitorDevClear
|
|
TruthValue,
|
|
hpnicfDot11MonitorDevSNR
|
|
Integer32
|
|
}
|
|
|
|
hpnicfDot11MonitorDevMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents MAC address of the device detected."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 1 }
|
|
|
|
hpnicfDot11MonitorDevType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
client(1),
|
|
ap(2),
|
|
adhoc(3),
|
|
wirelessBridge(4),
|
|
unknown(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents type of the device detected."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 2 }
|
|
|
|
hpnicfDot11MonitorDevVendor OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents vendor of the detected device."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 3 }
|
|
|
|
hpnicfDot11MonitorDevSSID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the service set identifier for the ESS of the device which
|
|
type is ap or adhoc."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 4 }
|
|
|
|
hpnicfDot11MonitorDevBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the basic service set identifier of the detected device."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 5 }
|
|
|
|
hpnicfDot11MonitorDevChannel OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ChannelScopeType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the channel in which the device was last detected. AP will
|
|
choose the channel which has maximum signal strength as effective
|
|
channel, as there is interference between adjacent channels."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 6 }
|
|
|
|
hpnicfDot11MonitorRadioId OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioScopeType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio ID of the AP that detected the device."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 7 }
|
|
|
|
hpnicfDot11MonitorDevMaxRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dbm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the maximum detected RSSI of the device in a scan report cycle."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 8 }
|
|
|
|
hpnicfDot11MonitorDevBeaconIntvl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "millisecond"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the beacon interval for the detected device(not include
|
|
the device which type is client)."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 9 }
|
|
|
|
hpnicfDot11MonitorDevFstDctTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the time at which the device was first detected."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 10 }
|
|
|
|
hpnicfDot11MonitorDevLstDctTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the time at which the device was detected last time."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 11 }
|
|
|
|
hpnicfDot11MonitorDevClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to clear the information of the device detected
|
|
in the WLAN.
|
|
It will return false for get operation."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 12 }
|
|
|
|
hpnicfDot11MonitorDevSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the SNR of the device in a scan report cycle."
|
|
::= { hpnicfDot11MonitorDetectedDevEntry 13 }
|
|
|
|
END
|