671 lines
27 KiB
Plaintext
671 lines
27 KiB
Plaintext
-- =====================================================================
|
|
-- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
|
|
--
|
|
-- Description: DHCP Relay MIB.
|
|
-- Reference:
|
|
-- Version: V1.1
|
|
-- History:
|
|
-- V1.0 2005-4-11 created by wumingyu
|
|
-- V1.1 2006-01-10 modified by xuyufei
|
|
-- Add hpnicfDHCPRConfigOption82IfTable
|
|
-- =====================================================================
|
|
HPN-ICF-DHCPRELAY-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
TruthValue, RowStatus, MacAddress
|
|
FROM SNMPv2-TC
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB
|
|
hpnicfCommon
|
|
FROM HPN-ICF-OID-MIB;
|
|
|
|
-- ==================================================================
|
|
--
|
|
-- module identity part
|
|
--
|
|
-- ==================================================================
|
|
hpnicfDhcpRelay MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"200506080000Z"
|
|
ORGANIZATION
|
|
""
|
|
CONTACT-INFO
|
|
""
|
|
DESCRIPTION "DHCPR MIB"
|
|
REVISION
|
|
"200506080000Z"
|
|
DESCRIPTION
|
|
"The initial version of this MIB module."
|
|
::= { hpnicfCommon 58 }
|
|
|
|
-- ==================================================================
|
|
--
|
|
-- =====================object definition begin======================
|
|
--
|
|
-- ==================================================================
|
|
hpnicfDHCPRMibObject OBJECT IDENTIFIER ::= { hpnicfDhcpRelay 1 }
|
|
|
|
--hpnicfDHCPRIfSelectTable--
|
|
hpnicfDHCPRIfSelectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDHCPRIfSelectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table for configuring relay mode
|
|
for interfaces.
|
|
"
|
|
::= { hpnicfDHCPRMibObject 1 }
|
|
|
|
hpnicfDHCPRIfSelectEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDHCPRIfSelectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry for configuring relay mode for an
|
|
interface.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { hpnicfDHCPRIfSelectTable 1 }
|
|
|
|
HpnicfDHCPRIfSelectEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hpnicfDHCPRIfSelectRelayMode INTEGER
|
|
}
|
|
|
|
hpnicfDHCPRIfSelectRelayMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If the value is on, the DHCP relay function
|
|
would be enabled on this interface.
|
|
"
|
|
DEFVAL { off }
|
|
|
|
::= { hpnicfDHCPRIfSelectEntry 1 }
|
|
|
|
--hpnicfDHCPRIpToGroupTable--
|
|
hpnicfDHCPRIpToGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDHCPRIpToGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table for configuring ip addresses for DHCP
|
|
server groups.
|
|
"
|
|
::= { hpnicfDHCPRMibObject 2 }
|
|
|
|
hpnicfDHCPRIpToGroupEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDHCPRIpToGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry for configuring ip addresses for a DHCP
|
|
server group.
|
|
"
|
|
INDEX
|
|
{
|
|
hpnicfDHCPRIpToGroupGroupId,
|
|
hpnicfDHCPRIpToGroupServerIpType,
|
|
hpnicfDHCPRIpToGroupServerIp
|
|
}
|
|
::= { hpnicfDHCPRIpToGroupTable 1 }
|
|
|
|
HpnicfDHCPRIpToGroupEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hpnicfDHCPRIpToGroupGroupId Integer32,
|
|
hpnicfDHCPRIpToGroupServerIpType InetAddressType,
|
|
hpnicfDHCPRIpToGroupServerIp InetAddress,
|
|
hpnicfDHCPRIpToGroupRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDHCPRIpToGroupGroupId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..19)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Group identifier of DHCP server group. "
|
|
::= { hpnicfDHCPRIpToGroupEntry 1 }
|
|
|
|
hpnicfDHCPRIpToGroupServerIpType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip address type of DHCP server. "
|
|
::= { hpnicfDHCPRIpToGroupEntry 2 }
|
|
|
|
hpnicfDHCPRIpToGroupServerIp OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ip address of DHCP server. "
|
|
::= { hpnicfDHCPRIpToGroupEntry 3 }
|
|
|
|
hpnicfDHCPRIpToGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operation status of this table entry.
|
|
Three actions are used: active,
|
|
createAndGo, destroy.
|
|
"
|
|
::= { hpnicfDHCPRIpToGroupEntry 4 }
|
|
|
|
--hpnicfDHCPRIfToGroupTable--
|
|
hpnicfDHCPRIfToGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDHCPRIfToGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table for configuring DHCP server groups
|
|
for interfaces.
|
|
"
|
|
::= { hpnicfDHCPRMibObject 3 }
|
|
|
|
hpnicfDHCPRIfToGroupEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDHCPRIfToGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry for configuring DHCP server group for
|
|
an interface.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { hpnicfDHCPRIfToGroupTable 1 }
|
|
|
|
HpnicfDHCPRIfToGroupEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hpnicfDHCPRIfToGroupGroupId Integer32,
|
|
hpnicfDHCPRIfToGroupRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDHCPRIfToGroupGroupId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..19)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The DHCP server group for this interface. "
|
|
::= { hpnicfDHCPRIfToGroupEntry 1 }
|
|
|
|
hpnicfDHCPRIfToGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operation status of this table entry.
|
|
Three actions are used: active,
|
|
createAndGo, destroy"
|
|
::= { hpnicfDHCPRIfToGroupEntry 2 }
|
|
|
|
--hpnicfDHCPRAddrCheckTable--
|
|
hpnicfDHCPRAddrCheckTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDHCPRAddrCheckEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the states of dhcp security address
|
|
check switchs for interfaces.
|
|
"
|
|
::= { hpnicfDHCPRMibObject 4 }
|
|
|
|
hpnicfDHCPRAddrCheckEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDHCPRAddrCheckEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing the state of dhcp security address
|
|
check switch for an interface.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { hpnicfDHCPRAddrCheckTable 1 }
|
|
|
|
HpnicfDHCPRAddrCheckEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hpnicfDHCPRAddrCheckSwitch INTEGER
|
|
}
|
|
|
|
hpnicfDHCPRAddrCheckSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of dhcp security address check switch for
|
|
this interface.
|
|
It has two defined values: enabled and disabled.
|
|
If the value is enabled, the address check function
|
|
would be enabled. The default value is disabled.
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { hpnicfDHCPRAddrCheckEntry 1 }
|
|
|
|
--hpnicfDHCPRSecurityTable--
|
|
hpnicfDHCPRSecurityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDHCPRSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing the information of
|
|
DHCP security.
|
|
"
|
|
::= { hpnicfDHCPRMibObject 5 }
|
|
|
|
hpnicfDHCPRSecurityEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDHCPRSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing the information of
|
|
DHCP security.
|
|
"
|
|
INDEX
|
|
{
|
|
hpnicfDHCPRSecurityClientIpAddrType,
|
|
hpnicfDHCPRSecurityClientIpAddr
|
|
}
|
|
::= { hpnicfDHCPRSecurityTable 1 }
|
|
|
|
HpnicfDHCPRSecurityEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hpnicfDHCPRSecurityClientIpAddrType InetAddressType,
|
|
hpnicfDHCPRSecurityClientIpAddr InetAddress,
|
|
hpnicfDHCPRSecurityClientMacAddr MacAddress,
|
|
hpnicfDHCPRSecurityClientProperty INTEGER,
|
|
hpnicfDHCPRSecurityClientRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDHCPRSecurityClientIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DHCP client's net ip address type"
|
|
::= { hpnicfDHCPRSecurityEntry 1 }
|
|
|
|
hpnicfDHCPRSecurityClientIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DHCP client's net ip address"
|
|
::= { hpnicfDHCPRSecurityEntry 2 }
|
|
|
|
hpnicfDHCPRSecurityClientMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "DHCP client's mac address"
|
|
::= { hpnicfDHCPRSecurityEntry 3 }
|
|
|
|
hpnicfDHCPRSecurityClientProperty OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
static(1),
|
|
dynamic(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Property of client address"
|
|
::= { hpnicfDHCPRSecurityEntry 4 }
|
|
|
|
hpnicfDHCPRSecurityClientRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operation status of this table entry.
|
|
Three actions are used: active,
|
|
createAndGo, destroy"
|
|
::= { hpnicfDHCPRSecurityEntry 5 }
|
|
|
|
--hpnicfDHCPRStatisticsGroup--
|
|
hpnicfDHCPRStatisticsGroup OBJECT IDENTIFIER ::= { hpnicfDHCPRMibObject 6 }
|
|
|
|
hpnicfDHCPRRxClientPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the packets received from DHCP
|
|
clients by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 1 }
|
|
|
|
hpnicfDHCPRTxClientPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the brodcast packets transmitted
|
|
to DHCP clients by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 2 }
|
|
|
|
hpnicfDHCPRRxServerPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the packets received from
|
|
DHCP Servers by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 3 }
|
|
|
|
hpnicfDHCPRTxServerPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the packets transmitted to
|
|
DHCP Servers by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 4 }
|
|
|
|
hpnicfDHCPRDiscoverPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Discover packets handled
|
|
by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 5 }
|
|
|
|
hpnicfDHCPRRequestPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Request packets handled
|
|
by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 6 }
|
|
|
|
hpnicfDHCPRDeclinePktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Decline packets handled
|
|
by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 7 }
|
|
|
|
hpnicfDHCPRReleasePktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Release packets handled
|
|
by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 8 }
|
|
|
|
hpnicfDHCPRInformPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Inform packets handled
|
|
by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 9 }
|
|
|
|
hpnicfDHCPROfferPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Offer packets handled
|
|
by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 10 }
|
|
|
|
hpnicfDHCPRAckPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Ack packets handled
|
|
by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 11 }
|
|
|
|
hpnicfDHCPRNakPktNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of the DHCP Nak packets handled
|
|
by DHCP relay.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 12 }
|
|
|
|
hpnicfDHCPRStatisticsReset OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node only supports set operation.
|
|
If the value is true,it will clear all of the packet
|
|
statistics.
|
|
"
|
|
::= { hpnicfDHCPRStatisticsGroup 13 }
|
|
|
|
--hpnicfDHCPRCycleGroup--
|
|
hpnicfDHCPRCycleGroup OBJECT IDENTIFIER ::= { hpnicfDHCPRMibObject 7 }
|
|
|
|
hpnicfDHCPRCycleStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If the value is on, the cycle function
|
|
would be enabled.
|
|
"
|
|
DEFVAL { off }
|
|
::= { hpnicfDHCPRCycleGroup 1 }
|
|
|
|
--hpnicfDHCPRConfigOption82Group--
|
|
hpnicfDHCPRConfigOption82Group OBJECT IDENTIFIER ::= { hpnicfDHCPRMibObject 8 }
|
|
|
|
hpnicfDHCPROption82Switch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If the value is enabled,
|
|
DHCP relay supporting option 82 function
|
|
would be enabled.
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { hpnicfDHCPRConfigOption82Group 1 }
|
|
|
|
hpnicfDHCPROption82HandleStrategy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
drop(1),
|
|
keep(2),
|
|
replace(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The strategies of DHCP relay handling option 82.
|
|
|
|
'drop' indicates DHCP relay discarding the request
|
|
packet including option 82.
|
|
|
|
'keep' indicates DHCP relay accepting the request
|
|
packet without any change of the option 82.
|
|
|
|
'replace' indicates DHCP relay accepting the
|
|
request packet on condition that it generates a new
|
|
option 82 to replace the original one.
|
|
"
|
|
DEFVAL { replace }
|
|
::= { hpnicfDHCPRConfigOption82Group 2 }
|
|
|
|
hpnicfDHCPRConfigOption82IfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDHCPRConfigOption82IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing the information of DHCP
|
|
option 82.
|
|
This table depends on hpnicfDHCPRIfToGroupTable.
|
|
An entry of this table will be created when
|
|
an entry of hpnicfDHCPRIfToGroupTable is created.
|
|
"
|
|
::= { hpnicfDHCPRConfigOption82Group 3 }
|
|
|
|
hpnicfDHCPRConfigOption82IfEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDHCPRConfigOption82IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry containing the information of
|
|
DHCP option 82.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { hpnicfDHCPRConfigOption82IfTable 1 }
|
|
|
|
HpnicfDHCPRConfigOption82IfEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hpnicfDHCPROption82IfSwitch INTEGER,
|
|
hpnicfDHCPROption82IfStrategy INTEGER,
|
|
hpnicfDHCPROption82IfFormat INTEGER,
|
|
hpnicfDHCPROption82IfNodeType INTEGER,
|
|
hpnicfDHCPROption82IfUsrDefString OCTET STRING
|
|
}
|
|
|
|
hpnicfDHCPROption82IfSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If DHCP relay supports option 82 functions, the
|
|
value is 'enabled'.
|
|
If DHCP relay does not support option 82 functions,
|
|
the value is 'disabled'.
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { hpnicfDHCPRConfigOption82IfEntry 1 }
|
|
|
|
hpnicfDHCPROption82IfStrategy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
drop(1),
|
|
keep(2),
|
|
replace(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The strategies of DHCP relay handling option 82.
|
|
|
|
'drop' indicates DHCP relay discarding the request
|
|
packet including option 82.
|
|
|
|
'keep' indicates DHCP relay accepting the request
|
|
packet without any change of the option 82.
|
|
|
|
'replace' indicates DHCP relay accepting the
|
|
request packet on condition that it generates a new
|
|
option 82 to replace the original one.
|
|
"
|
|
DEFVAL { replace }
|
|
::= { hpnicfDHCPRConfigOption82IfEntry 2 }
|
|
|
|
hpnicfDHCPROption82IfFormat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
verbose(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The format of DHCP relay option 82.
|
|
|
|
'normal' is the standard format.
|
|
|
|
'verbose' is the detailed format.
|
|
"
|
|
DEFVAL { normal }
|
|
::= { hpnicfDHCPRConfigOption82IfEntry 3 }
|
|
|
|
hpnicfDHCPROption82IfNodeType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
invalid(1),
|
|
mac(2),
|
|
sysname(3),
|
|
userdefine(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Property of DHCP relay option 82 verbose format.
|
|
The value can be set by user only when the value
|
|
of hpnicfDHCPROption82IfFormat is set with 'verbose'.
|
|
|
|
If the value of hpnicfDHCPROption82IfFormat is
|
|
'normal', the value is automatically set with
|
|
'invalid'. the value can not be set with 'invalid'
|
|
by user.
|
|
|
|
'mac' indicates the option 82 verbose format is
|
|
filled in with the mac of DHCP relay input
|
|
interface. If the value of hpnicfDHCPROption82IfFormat
|
|
is set with 'verbose', the value is automatically
|
|
set with 'mac'.
|
|
|
|
'sysname' indicates the option 82 verbose format
|
|
is filled in with the name of the DHCP relay.
|
|
|
|
'userdefine' indicates the option 82 verbose format
|
|
is filled in with the string defined by user.
|
|
If the value is set with 'userdefine', the value of
|
|
hpnicfDHCPROption82IfUsrDefString must be set
|
|
simultaneously.
|
|
"
|
|
DEFVAL { invalid }
|
|
::= { hpnicfDHCPRConfigOption82IfEntry 4 }
|
|
|
|
hpnicfDHCPROption82IfUsrDefString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The string defined by user to fill in the
|
|
option 82 verbose format. If the value of
|
|
hpnicfDHCPROption82IfFormat is 'normal', or the
|
|
value of hpnicfDHCPROption82IfNodeType is 'mac'
|
|
or 'sysname', it is set with a null string
|
|
automatically and can not be modified by user.
|
|
It must be set with a non-zero length string
|
|
when the value of hpnicfDHCPROption82IfNodeType
|
|
is set with 'userdefine'.
|
|
"
|
|
::= { hpnicfDHCPRConfigOption82IfEntry 5 }
|
|
END
|