1089 lines
41 KiB
Plaintext
1089 lines
41 KiB
Plaintext
-- HP700RX Config MIB definition.
|
|
-- Contact xsupport@waterloo.hp.com
|
|
--
|
|
|
|
HP700RX-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, NetworkAddress, IpAddress, Counter, Gauge,
|
|
TimeTicks
|
|
FROM RFC1065-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
-- Define some of the things we need.
|
|
--
|
|
|
|
hp OBJECT IDENTIFIER ::= { enterprises 11 }
|
|
nm OBJECT IDENTIFIER ::= { hp 2 }
|
|
system OBJECT IDENTIFIER ::= { nm 3 }
|
|
interface OBJECT IDENTIFIER ::= { nm 4 }
|
|
icmp OBJECT IDENTIFIER ::= { nm 7 }
|
|
snmp OBJECT IDENTIFIER ::= { nm 13 }
|
|
|
|
trap OBJECT IDENTIFIER ::= { snmp 1 }
|
|
snmpdConf OBJECT IDENTIFIER ::= { snmp 2 }
|
|
|
|
netPeripherals OBJECT IDENTIFIER ::= { system 9 }
|
|
hpXStation OBJECT IDENTIFIER ::= { netPeripherals 3 }
|
|
|
|
config OBJECT IDENTIFIER ::= { hpXStation 1 }
|
|
|
|
-- Now our groups. Each one corresponds to a config screen.
|
|
|
|
terminal OBJECT IDENTIFIER ::= { config 1 }
|
|
network OBJECT IDENTIFIER ::= { config 2 }
|
|
startup OBJECT IDENTIFIER ::= { config 3 }
|
|
statistics OBJECT IDENTIFIER ::= { config 4 }
|
|
preferences OBJECT IDENTIFIER ::= { config 5 }
|
|
reset OBJECT IDENTIFIER ::= { config 6 }
|
|
|
|
|
|
-- the terminal group.
|
|
-- This screen has terminal control type config data that is
|
|
-- outside the X world and isn't related to the network.
|
|
|
|
monitor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
a1097(1),
|
|
hp98754(2),
|
|
hp98789(3),
|
|
hpd1187(4),
|
|
hpa1497(5),
|
|
hp98753(6),
|
|
hp98785(7),
|
|
hpd1188(8),
|
|
hpd1195(9),
|
|
hpd1182(10),
|
|
hp98774(11),
|
|
hpd1195x1224(12),
|
|
hpd1195x640(13)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of monitor the terminal is configured
|
|
to drive. Each monitor type varies in resolution,
|
|
refresh rate, color capability, dots per inch,
|
|
and synchronization. Some monitors (especially
|
|
multi-sync types) may produce usable displays
|
|
at several settings. "
|
|
::= { terminal 1 }
|
|
|
|
monitorDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The resolution, refresh rate, color capability,
|
|
dots per inch, and synchronization the terminal
|
|
is sending to its monitor and the part number
|
|
of the monitor that works best at these settings. "
|
|
::= { terminal 2 }
|
|
|
|
at2kbLEDControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
client(1),
|
|
local(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the CAPS-LOCK LED on the
|
|
keyboard (if present) is controlled by
|
|
the X terminal or the clients (as X LED 3). "
|
|
::= { terminal 3 }
|
|
|
|
at2kbLanguage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
usascii(1),
|
|
danish(2),
|
|
french(3),
|
|
norwegian(4),
|
|
swissgerman(5),
|
|
candianfrench(6),
|
|
english(7),
|
|
finnish(8),
|
|
belgian(9),
|
|
spanish(10),
|
|
german(11),
|
|
swedish(12),
|
|
dutch(13),
|
|
italian(14),
|
|
candianenglish(15),
|
|
swissfrench(16),
|
|
hangul(17),
|
|
simplifiedchinese(18),
|
|
traditionalchinese(19),
|
|
kanji(20),
|
|
decLK401english(21),
|
|
reserved(22)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The language setting for an AT/2 keyboard
|
|
attached to this terminal. "
|
|
::= { terminal 4 }
|
|
|
|
serialSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bps75(1),
|
|
bps150(2),
|
|
bps300(3),
|
|
bps600(4),
|
|
bps1200(5),
|
|
bps2400(6),
|
|
bps4800(7),
|
|
bps9600(8),
|
|
bps19200(9),
|
|
bps38400(10)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The baud rate of the serial port."
|
|
::= { terminal 5 }
|
|
|
|
serialDataBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bits7(1),
|
|
bits8(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of data bits in each character
|
|
sent and received over the serial port."
|
|
::= { terminal 6 }
|
|
|
|
serialStopBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bits1(1),
|
|
bits2(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of stop bits sent at the end of
|
|
each character sent through the serial port."
|
|
::= { terminal 7 }
|
|
|
|
serialParity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
even(2),
|
|
odd(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The parity generated and checked on
|
|
each character sent and received through
|
|
the serial port."
|
|
::= { terminal 8 }
|
|
|
|
serialPacing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
xonxoff(2),
|
|
rtscts(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of flow control used on the serial port."
|
|
::= { terminal 9 }
|
|
|
|
serialUse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
primary(2),
|
|
auxiliary(3),
|
|
diagnostics(4),
|
|
serialsession(5),
|
|
slip(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"What the serial port is being used for. Note
|
|
that primary and auxiliary use indicate that
|
|
the serial port is 'connected' to TCP ports
|
|
9100 and 9101 respectively."
|
|
::= { terminal 10 }
|
|
|
|
parallelUse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
primary(2),
|
|
auxiliary(3),
|
|
diagnostics(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"What the parallel port is being used for. Note
|
|
that primary and auxiliary use indicate that
|
|
the serial port is 'connected' to TCP ports
|
|
9100 and 9101 respectively."
|
|
::= { terminal 11 }
|
|
portuseEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable indicates whether remote (through
|
|
SNMP) serial port use changes are allowed."
|
|
::= { terminal 12 }
|
|
|
|
|
|
|
|
-- the network group
|
|
-- this screen has the network related config information.
|
|
--
|
|
networkParamsFrom OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bootp(1),
|
|
eeprom(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the X terminal will use
|
|
bootp to get its network parameters (IP address,
|
|
default gateway, boot file, terminal name,
|
|
domain name, name server addresses, subnet mask,
|
|
and remote configuration file) at power up or
|
|
use those stored in EEPROM."
|
|
::= { network 1 }
|
|
|
|
configedAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address configured for the Ethernet
|
|
interface on this terminal.
|
|
|
|
The active value for this field is set at
|
|
startup. After startup a different value can be
|
|
saved to terminal memory without being used,
|
|
therefore the value returned via SNMP is not
|
|
necessarily the value currently in use. "
|
|
::= { network 2 }
|
|
|
|
configedSubnetMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subnet mask configured for the Ethernet
|
|
interface on this terminal.
|
|
|
|
The active value for this field is set at
|
|
startup. After startup a different value can be
|
|
saved to terminal memory without being used,
|
|
therefore the value returned via SNMP is not
|
|
necessarily the value currently in use. "
|
|
::= { network 3 }
|
|
|
|
-- the configured routing table
|
|
--
|
|
configedRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RouteTableEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The routes configured for this terminal.
|
|
|
|
At startup the terminal tests the routes
|
|
in its routing table. If any route fails,
|
|
it will be discarded, therefore the configured
|
|
routes may not be the routes in use.
|
|
There are a number of ways a route can fail
|
|
the startup tests, including: terminal can't ping
|
|
the gateway, terminal can't resolve one of the
|
|
names into an IP address, or a specified gateway
|
|
is not on a connected subnet."
|
|
::= { network 4 }
|
|
|
|
routeTableEntry OBJECT-TYPE
|
|
SYNTAX RouteTableEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry reflects one route."
|
|
INDEX { routeIndex }
|
|
::= { configedRouteTable 1 }
|
|
|
|
RouteTableEntry ::= SEQUENCE {
|
|
routeIndex
|
|
INTEGER,
|
|
routeGateway
|
|
DisplayString,
|
|
routeDestination
|
|
DisplayString
|
|
}
|
|
|
|
routeIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of a row in the gateway table on the
|
|
Network config screen."
|
|
::= { routeTableEntry 1 }
|
|
|
|
routeGateway OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The address of an intermediate machine to
|
|
send packets to. Note that this is a string
|
|
and may be either a dotted decimal IP address
|
|
or a domain name."
|
|
::= { routeTableEntry 2 }
|
|
|
|
routeDestination OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The final destination address for this route.
|
|
This may be a machine or a network. Note that this
|
|
is a string and may be either a dotted decimal
|
|
IP address or a domain name."
|
|
::= { routeTableEntry 3 }
|
|
|
|
primaryFileServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The address of the first file server the terminal
|
|
attempts to contact at startup. This may be
|
|
either a node name (in which case it will be
|
|
resolved to an address using Domain Name
|
|
Resolution) or it may be an IP address in dotted
|
|
decimal form. "
|
|
::= { network 5 }
|
|
|
|
primaryAccessMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftp(1),
|
|
nfs(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The method used to read files from the primary
|
|
file server. This method may be overridden for
|
|
individual paths."
|
|
::= { network 6 }
|
|
|
|
alternateFileServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The address of the file server the terminal
|
|
will attempt to contact at startup if the primary
|
|
file server cannot be reached. This address
|
|
may be the node name (in which case it will be
|
|
resolved to an address before use using the Domain
|
|
Name Resolution) or it may be the address in dotted
|
|
decimal form. "
|
|
::= { network 7 }
|
|
|
|
alternateAccessMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftp(1),
|
|
nfs(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The method used to read files from the alternative
|
|
file server. This method may be overridden for
|
|
individual pathes."
|
|
::= { network 8 }
|
|
|
|
fileTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum time (in seconds) that the terminal
|
|
will wait for a response to a request to the file
|
|
server before giving up. The name resolver timeout
|
|
is six times the file timeout. "
|
|
::= { network 9 }
|
|
|
|
primaryNameServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The primary name server's IP address
|
|
in dotted decimal format."
|
|
::= { network 10 }
|
|
|
|
alternateNameServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The alternative name server's IP address
|
|
in dotted decimal format. If no answer is received
|
|
from the primary name server, the terminal attempts
|
|
to contact this name server."
|
|
::= { network 11 }
|
|
|
|
domain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The fully qualified domain of the network to
|
|
which the terminal is connected. This includes
|
|
all parts following the first '.' (dot) in the
|
|
fully qualified host name of the terminal.
|
|
Typical examples are hp.com or waterloo.edu"
|
|
::= { network 12 }
|
|
|
|
terminalName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name assigned to this terminal. This
|
|
name should correspond to the name assigned
|
|
using the Domain Name service, Network Information
|
|
Services, and other host address lookup mechanisms."
|
|
::= { network 13 }
|
|
|
|
slipLocalAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The address used for the terminal end of
|
|
the SLIP connection."
|
|
::= { network 14 }
|
|
|
|
slipRemoteAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The address used for the remote (host) end
|
|
end of the SLIP connection."
|
|
::= { network 15 }
|
|
|
|
|
|
slipMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subnet mask configured for the SLIP
|
|
interface on this terminal. "
|
|
::= { network 16 }
|
|
|
|
-- the startup group
|
|
-- This screen contains information related to starting up the
|
|
-- terminal and the X server. It also has the X server font path
|
|
-- information displayed.
|
|
--
|
|
|
|
romFonts OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls whether or not fonts are read from
|
|
the ROM card (if present). "
|
|
::= { startup 1 }
|
|
|
|
rgbFileFrom OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
network(1),
|
|
rom(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls whether or not the rgb.txt file
|
|
is read from the ROM card (if present). "
|
|
::= { startup 2 }
|
|
|
|
bootFileFrom OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
network(1),
|
|
rom(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls whether or not the X server file
|
|
is read from the ROM card (if present). "
|
|
::= { startup 3 }
|
|
|
|
bootFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of the X server file to load.
|
|
This may be a complete path (starting with /)
|
|
and may include host and access method overrides."
|
|
::= { startup 4 }
|
|
|
|
remoteConfigEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls whether or not the remote config
|
|
file is read from the file server at startup."
|
|
::= { startup 5 }
|
|
|
|
remoteConfigFile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of the remote config file to load at
|
|
startup. This may be a complete path (starting
|
|
with /) and include host and access method overrides."
|
|
::= { startup 6 }
|
|
|
|
xdmcpEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls whether or not XDMCP is used to start
|
|
user sessions on this terminal."
|
|
::= { startup 7 }
|
|
|
|
xdmcpType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast(1),
|
|
direct(2),
|
|
indirect(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the type of XDMCP request sent
|
|
from the terminal at startup."
|
|
::= { startup 8 }
|
|
|
|
xdmcpHost OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The address of the host to which the terminal
|
|
sends XDMCP requests at startup. This field is
|
|
ignored if XDMCP type is BROADCAST."
|
|
::= { startup 9 }
|
|
|
|
telnetAutoStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines whether a TELNET session is auto-
|
|
started at boot time. TELNET can be used
|
|
to start a user session, but TELNET cannot be
|
|
used if XDMCP is enabled."
|
|
::= { startup 10 }
|
|
|
|
telnetCharSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
usascii(1),
|
|
isoLatin1(2),
|
|
hpRoman8(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the character set used to display
|
|
characters in the TELNET and serial terminal
|
|
sessions. "
|
|
::= { startup 11 }
|
|
|
|
telnetHost OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The address of the host to attempt to connect
|
|
to when TELNET is (auto)started. This may be a
|
|
name or IP address in dotted decimal format."
|
|
::= { startup 12 }
|
|
|
|
|
|
--
|
|
-- The font path table.
|
|
--
|
|
|
|
fontPathTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FontEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of directory paths used when by the X server
|
|
when searching for fonts"
|
|
::= { startup 13 }
|
|
|
|
fontEntry OBJECT-TYPE
|
|
SYNTAX FontEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An single path to a set of font files."
|
|
INDEX { fontIndex }
|
|
::= { fontPathTable 1 }
|
|
|
|
FontEntry ::= SEQUENCE {
|
|
fontIndex
|
|
INTEGER,
|
|
fontPath
|
|
DisplayString
|
|
}
|
|
|
|
fontIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index into the list of font paths."
|
|
::= { fontEntry 1 }
|
|
|
|
fontPath OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The actual font path in the format appropriate
|
|
to the operating system in use."
|
|
::= { fontEntry 2 }
|
|
|
|
|
|
|
|
-- the statistics group
|
|
-- There are two stats screens that show the values of various
|
|
-- counters etc.
|
|
--
|
|
|
|
memInstalled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of memory installed in the terminal
|
|
(excluding video memory) in Kbytes."
|
|
::= { statistics 1 }
|
|
|
|
memFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of memory in the free pool (including
|
|
free video memory). This is the total amount of
|
|
memory that is not currently in use in the terminal."
|
|
::= { statistics 2 }
|
|
|
|
memLowMark OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The size of the free pool at its smallest since
|
|
the last time this counter was reset."
|
|
::= { statistics 3 }
|
|
|
|
memFrags OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of fragments (of all sizes) in the
|
|
memory free pool."
|
|
::= { statistics 4 }
|
|
|
|
memLargestFrag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The size of the largest fragment in the free pool
|
|
in Kbytes. This represents the largest request for
|
|
memory that can be fulfilled by the terminal."
|
|
::= { statistics 5 }
|
|
|
|
memBackingstore OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of memory used for backingstore in
|
|
Kbytes."
|
|
::= { statistics 6 }
|
|
|
|
memReclaims OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times memory has been reclaimed
|
|
from backing store for other uses."
|
|
::= { statistics 7 }
|
|
|
|
serialInOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of octets received through the serial
|
|
port since the last time this counter was reset."
|
|
::= { statistics 8 }
|
|
|
|
serialOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of octets sent out the serial port since
|
|
The last time this counter was reset."
|
|
::= { statistics 9 }
|
|
|
|
serialInErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of errors detected on data received
|
|
in the serial port."
|
|
::= { statistics 10 }
|
|
|
|
parallelOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of octets sent out the parallel port
|
|
since the last time this counter was reset."
|
|
::= { statistics 11 }
|
|
|
|
parallelErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of errors detected in sending data
|
|
out the parallel port since the last time this
|
|
counter was reset."
|
|
::= { statistics 12 }
|
|
|
|
etherInPackets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received over Ethernet."
|
|
::= { statistics 13 }
|
|
|
|
etherInCRCErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of CRC errors detected in Ethernet
|
|
packets."
|
|
::= { statistics 14 }
|
|
|
|
etherInNoBuffers OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of time the Ethernet interface hardware
|
|
could not receive packets because no buffers were
|
|
available."
|
|
::= { statistics 15 }
|
|
|
|
etherInRunts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received on the Ethernet
|
|
interface that were shorter then the shortest
|
|
permitted packet."
|
|
::= { statistics 16 }
|
|
|
|
etherInOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of octets received on the Ethernet
|
|
interface."
|
|
::= { statistics 17 }
|
|
|
|
etherOutPackets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets sent out the Ethernet
|
|
interface."
|
|
::= { statistics 18 }
|
|
|
|
etherOutOneCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times the Ethernet interface had
|
|
to back off once due to a collision."
|
|
::= { statistics 19 }
|
|
|
|
etherOutTwoCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times the Ethernet interface had
|
|
to back off twice due to collisions."
|
|
::= { statistics 20 }
|
|
|
|
etherOutMoreCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of messages for which the Ethernet
|
|
interface had to back off more then twice (but less
|
|
then the maximum number of times) due to collisions."
|
|
::= { statistics 21 }
|
|
|
|
etherOutMaxCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times that the Ethernet interface
|
|
was unable to transmit a packet due to too many
|
|
collisions."
|
|
::= { statistics 22 }
|
|
|
|
etherOutNoBuffers OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times that the Ethernet interface
|
|
software had to drop an outbound packet because
|
|
there were no more interface transmit buffers."
|
|
::= { statistics 23 }
|
|
|
|
etherOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of octets sent out the Ethernet
|
|
interface."
|
|
::= { statistics 24 }
|
|
|
|
tftpTimeouts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times that the tftp driver has not
|
|
gotten a response within the file timeout period.
|
|
This is not the number of retransmits performed by
|
|
the tftp driver but is the number of completely
|
|
failed requests."
|
|
::= { statistics 25 }
|
|
|
|
statsTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The statistics information can be cleared (to zero)
|
|
by depressing a button on the statistics
|
|
screen. This variable indicates the time since this
|
|
was last done. It is the amount of time over which
|
|
statistics have been collected."
|
|
::= { statistics 26 }
|
|
|
|
slipInPackets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received over the serial
|
|
interface while running SLIP."
|
|
::= { statistics 27 }
|
|
|
|
slipInOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of octets received over the serial
|
|
interface while running SLIP."
|
|
::= { statistics 28 }
|
|
|
|
slipInErrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of errors encountered on received octets
|
|
on the serial interface while running SLIP."
|
|
::= { statistics 29 }
|
|
|
|
slipOutPackets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets transmitted over the serial
|
|
interface while running SLIP."
|
|
::= { statistics 30 }
|
|
|
|
slipOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of octets transmitted over the serial
|
|
interface while running SLIP."
|
|
::= { statistics 31 }
|
|
|
|
slipOutErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of errors encountered while transmitting
|
|
over the serial interface while running SLIP."
|
|
::= { statistics 32 }
|
|
|
|
etherInAlignErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received on the Ethernet
|
|
interface that were not an integral number of
|
|
octets in length."
|
|
::= { statistics 33 }
|
|
|
|
etherInCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of collisions detected on the Ethernet
|
|
interface that were after the start of the normal
|
|
packet."
|
|
::= { statistics 34 }
|
|
|
|
clientAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls whether MIT-MAGIC-COOKIE authentication
|
|
is used by the server during client connection. If
|
|
enabled, the client must pass a valid MAGIC_COOKIE
|
|
to the server during the connection sequence. This
|
|
feature can only be used with XDMCP enabled."
|
|
::= { preferences 1 }
|
|
|
|
accessControls OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This determines whether host access controls are used
|
|
by the server during client connection. If enabled, only
|
|
those clients running on hosts listed in the terminal's
|
|
access control file will be allowed to connect
|
|
to the X server. This file is read from the host using
|
|
the path
|
|
/usr/tftpdir/usr/lib/X11/700X/etc/ipaddress.hosts."
|
|
::= { preferences 2 }
|
|
|
|
r3BugCompatability OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This determines whether the server behaves like an
|
|
X11R3 server for certain specific operations."
|
|
::= { preferences 3 }
|
|
|
|
resetEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable indicates whether remote (through
|
|
SNMP) resets are allowed."
|
|
::= { reset 1 }
|
|
|
|
reboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
dont(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this variable to zero will cause the
|
|
X terminal to reset."
|
|
::= { reset 2 }
|
|
|
|
END
|