Observium_CE/mibs/hp/HP-ICF-VRRPV3-MIB

541 lines
22 KiB
Plaintext

--**MOD+***********************************************************************
-- Module: hpicfVrrpv3.mib
--
-- Copyright (C) 2000-2015, 2021 Hewlett Packard Enterprise Development LP
-- All Rights Reserved.
--
-- The contents of this software are proprietary and confidential
-- to the Hewlett Packard Enterprise Development LP. No part of this
-- program may be photocopied, reproduced, or translated into another
-- programming language without prior written consent of the
-- Hewlett Packard Enterprise Development LP.
--
-- Purpose: Defining propreitary MIB objects for VRRP V3.
--
--*MOD-***********************************************************************/
HP-ICF-VRRPV3-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Counter64
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
vrrpv3OperationsEntry, vrrpv3AssociatedIpAddrEntry, vrrpv3OperationsVrId,
vrrpv3OperationsInetAddrType
FROM VRRPV3-MIB
TruthValue, RowStatus
FROM SNMPv2-TC
hpSwitch
FROM HP-ICF-OID;
hpicfVrrpv3MIB MODULE-IDENTITY
LAST-UPDATED "201509160000Z" -- Sep 16, 2015."
ORGANIZATION "HP Networking"
CONTACT-INFO "Hewlett Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "This MIB module contains HP proprietary
extensions to the standard VRRPV3-MIB module."
REVISION "201509160000Z" -- Sep 16, 2015."
DESCRIPTION "Added an object to support the bfd protocol
operations under vrrp. Added hpicfVrrpv3VrBfdIPAddr."
REVISION "201211210000Z" -- Nov 21, 2012."
DESCRIPTION "Added statistics objects."
REVISION "201210250000Z" -- Oct 25, 2012."
DESCRIPTION "Initial revision."
::= { hpSwitch 90 }
-- **********************************************************************
-- VRRPV3 MIB Groups
-- **********************************************************************
hpicfVrrpv3Operations OBJECT IDENTIFIER ::= { hpicfVrrpv3MIB 1 }
hpicfVrrpv3ErrorObjects OBJECT IDENTIFIER ::= { hpicfVrrpv3Operations 10 }
hpicfVrrpv3Conformance OBJECT IDENTIFIER ::= { hpicfVrrpv3MIB 2 }
hpicfVrrpv3IPv4AdminStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to true, this enables VRRP for IPv4 globally on
the router. If set to false, this would disable VRRPv3
for IPv4. Default is false."
DEFVAL { false }
::= { hpicfVrrpv3Operations 1 }
hpicfVrrpv3IPv6AdminStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to true, this enables VRRP for IPv6 globally on
the router. If set to false, this would disable VRRPv3
for IPv6. Default is false."
DEFVAL { false }
::= { hpicfVrrpv3Operations 2 }
-- **********************************************************************
-- Extensions to the VRRPv3 Operations Table
-- **********************************************************************
hpicfVrrpv3OperationsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfVrrpv3OperationsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions to the vrrpv3OperationsTable."
::= { hpicfVrrpv3Operations 3 }
hpicfVrrpv3OperationsEntry OBJECT-TYPE
SYNTAX HpicfVrrpv3OperationsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions for an entry in the vrrpv3OperationsTable."
AUGMENTS { vrrpv3OperationsEntry }
::= { hpicfVrrpv3OperationsTable 1 }
HpicfVrrpv3OperationsEntry ::=
SEQUENCE {
hpicfVrrpv3VrMode INTEGER,
hpicfVrrpv3VrPreemptDelayTime Integer32,
hpicfVrrpv3VrControl INTEGER,
hpicfVrrpv3VrRespondToPing TruthValue,
hpicfVrrpv3Version INTEGER,
hpicfVrrpv3VrNullAuthCompatibility TruthValue,
hpicfVrrpv3VrBfdIPAddr InetAddress
}
hpicfVrrpv3VrMode OBJECT-TYPE
SYNTAX INTEGER {
owner(1),
backup(2),
uninitialized(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object denotes whether this VR has been
designated as an owner or as a backup. On VR
creation, this field is set to uninitialized.
The user cannot set the value of this object to
uninitialized."
DEFVAL { uninitialized }
::= { hpicfVrrpv3OperationsEntry 1 }
hpicfVrrpv3VrPreemptDelayTime OBJECT-TYPE
SYNTAX Integer32(0..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the time that the owner
virtual router will wait before taking control of
its virtual IP address. A value of 0 indicates
that the pre-empt delay timer is not active"
DEFVAL { 0 }
::= { hpicfVrrpv3OperationsEntry 2 }
hpicfVrrpv3VrControl OBJECT-TYPE
SYNTAX INTEGER {
failback(1),
failover(2),
failoverWithMonitoring(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When this object is set to failback (1), it acts
as a trigger to intimate VRRP to failback
to this router from another.
When this object is set to failover (2), it acts
as a trigger to intimate VRRP to failover
from this router to another.
When this object is set to
failoverWithMonitoring (3), in addition to
triggering VRRP to failover, it triggers VR to
monitor for presence of a main router.
When read, this object always returns
invalid (4)."
DEFVAL { invalid }
::= { hpicfVrrpv3OperationsEntry 3 }
hpicfVrrpv3VrRespondToPing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If set to FALSE, prevents a response to ping requests to
the virtual router IP addresses configured on the backup
router. If set to TRUE allows response to ping requests
to virtual IP addresses configured when virtual router
become main router. hpicfVrrpv3RespondToPing must also be
configured globally to respond to virtual IP ping
requests. By default hpicfVrrpv3VrRespondToPing is enabled."
DEFVAL { true }
::= { hpicfVrrpv3OperationsEntry 4 }
hpicfVrrpv3Version OBJECT-TYPE
SYNTAX INTEGER{
v2 (2),
v3 (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The configured version of VRRP. IPv6 Virtual Routers
supports only v3. Default value for IPv4 virtual
Routers is v2 and for IPv6 Virtual Routers is v3."
::= { hpicfVrrpv3OperationsEntry 5 }
hpicfVrrpv3VrNullAuthCompatibility OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION " When set to TRUE appends authentication data at the end to an
IPv6 VRRP packet being sent out. The authentication data is 8
bytes filled with 0 and is applicable only for IPv6 Virtual
router. By default hpicfVrrpv3VrNullAuthCompatibility is
set to FALSE."
DEFVAL { false }
::= { hpicfVrrpv3OperationsEntry 6 }
hpicfVrrpv3VrBfdIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION " IP address of the main router to enable BFD under VRRP."
::= { hpicfVrrpv3OperationsEntry 13 }
-- **********************************************************************
-- VRRPV3 Track Table
-- **********************************************************************
hpicfVrrpv3TrackTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfVrrpv3TrackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions for supporting tracking."
::= { hpicfVrrpv3Operations 4 }
hpicfVrrpv3TrackEntry OBJECT-TYPE
SYNTAX HpicfVrrpv3TrackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions for supporting tracking."
INDEX { ifIndex, vrrpv3OperationsVrId,
vrrpv3OperationsInetAddrType,
hpicfVrrpv3VrTrackType, hpicfVrrpv3VrTrackEntity }
::= { hpicfVrrpv3TrackTable 1 }
HpicfVrrpv3TrackEntry ::=
SEQUENCE {
hpicfVrrpv3VrTrackType INTEGER,
hpicfVrrpv3VrTrackEntity SnmpAdminString,
hpicfVrrpv3TrackRowStatus RowStatus
}
hpicfVrrpv3VrTrackType OBJECT-TYPE
SYNTAX INTEGER {
port(1),
trunk(2),
vlan(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the type of interface specified by
'hpicfVrrpv3VrTrackEntity'."
::= { hpicfVrrpv3TrackEntry 1 }
hpicfVrrpv3VrTrackEntity OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies interface details. Interface detail
is interpreted Based on type specified by
'hpicfVrrpv3VrTrackType'. Valid values for different track
types are -
------------------------------------
hpicfVrrpv3VrTrackType range
------------------------------------
port '1'..'65535'
trunk '1'..'65535'
vlan '1'..'65535'
------------------------------------"
::= { hpicfVrrpv3TrackEntry 2 }
hpicfVrrpv3TrackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of given track entity."
::= { hpicfVrrpv3TrackEntry 3 }
hpicfVrrpv3StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfVrrpv3StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of virtual router statistics."
::= { hpicfVrrpv3Operations 5 }
hpicfVrrpv3StatsEntry OBJECT-TYPE
SYNTAX HpicfVrrpv3StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing statistics information
about a given virtual router."
AUGMENTS { vrrpv3OperationsEntry }
::= { hpicfVrrpv3StatsTable 1 }
HpicfVrrpv3StatsEntry ::=
SEQUENCE {
hpicfVrrpv3StatsNearFailovers Counter32
}
hpicfVrrpv3StatsNearFailovers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object reports the number of near failovers
for backup virtual routers. A near failover occurs
when a backup virtual router has not received an
advertisement packet from the main virtual router
for two advertisement intervals."
DEFVAL { 0 }
::= { hpicfVrrpv3StatsEntry 1 }
hpicfVrrpv3RespondToPing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If this object is set to FALSE globally, it prevents a
response to ping requests to the virtual router IP
addresses configured on all backup routers.If set to TRUE,
allows response to ping requests to virtual IP addresses
configured on backup virtual routers when they become
main router. hpicfVrrpv3VrRespondToPing object must also be
configured on a Virtual router to respond to virtual
IP ping requests.
By default hpicfVrrpv3RespondToPing is disabled."
DEFVAL { false }
::= { hpicfVrrpv3Operations 6 }
hpicfVrrpv3RemoveConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This objects clears all existing vrrp
configuration and again intializes it with default
values when this is set with value 'true'. It also
clears (disables) the global VRRP enable flag.
SnmpGet on this will always return false."
DEFVAL { false }
::= { hpicfVrrpv3Operations 7 }
hpicfVrrpv3Nonstop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object defines the operation of VRRP on
redundant platforms. When set to TRUE, the VRRP
Main router will retain control of virtual-IP
addresses across a management card failure on
redundant platforms. When set to FALSE, the VRRP
Backup router will take control of virtual-IP
addresses on the network on the occurrence of a
management card failure on the Main VRRP router."
DEFVAL { false }
::= { hpicfVrrpv3Operations 8 }
hpicfVrrpv3NotificationCntl OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether the VRRPv3-enabled router will generate
SNMP traps for events defined in this MIB. 'Enabled'
results in SNMP traps; 'disabled', no traps are sent."
DEFVAL { enabled }
::= { hpicfVrrpv3Operations 9 }
hpicfVrrpv3IPv4RouterChecksumErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of IPv4 VRRP packets received with an
invalid VRRP checksum value.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
vrrpv3GlobalStatisticsDiscontinuityTime."
DEFVAL { 0 }
::= { hpicfVrrpv3ErrorObjects 1 }
hpicfVrrpv3IPv6RouterChecksumErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of IPv6 VRRP packets received with an
invalid VRRP checksum value.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
vrrpv3GlobalStatisticsDiscontinuityTime."
DEFVAL { 0 }
::= { hpicfVrrpv3ErrorObjects 2 }
hpicfVrrpv3IPv4RouterVersionErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of IPv4 VRRP packets received with an
unknown or unsupported version number.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
vrrpv3GlobalStatisticsDiscontinuityTime."
DEFVAL { 0 }
::= { hpicfVrrpv3ErrorObjects 3 }
hpicfVrrpv3IPv6RouterVersionErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of IPv6 VRRP packets received with an
unknown or unsupported version number.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
vrrpv3GlobalStatisticsDiscontinuityTime."
DEFVAL { 0 }
::= { hpicfVrrpv3ErrorObjects 4 }
hpicfVrrpv3IPv4RouterVrIdErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of IPv4 VRRP packets received with a
VRID that is not valid for any virtual router on this
router.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
vrrpv3GlobalStatisticsDiscontinuityTime."
DEFVAL { 0 }
::= { hpicfVrrpv3ErrorObjects 5 }
hpicfVrrpv3IPv6RouterVrIdErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of IPv6 VRRP packets received with a
VRID that is not valid for any virtual router on this
router.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
vrrpv3GlobalStatisticsDiscontinuityTime."
DEFVAL { 0 }
::= { hpicfVrrpv3ErrorObjects 6 }
-- **********************************************************************
-- Conformance Information
-- **********************************************************************
hpicfVrrpv3MIBCompliances OBJECT IDENTIFIER ::= { hpicfVrrpv3Conformance 1 }
hpicfVrrpv3MIBGroups OBJECT IDENTIFIER ::= { hpicfVrrpv3Conformance 2 }
-- ......................................................................
-- Compliance statements
-- ......................................................................
hpicfVrrpv3MIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers running
VRRPV3 and implementing the HP-ICF-VRRPV3-MIB."
MODULE -- this module
MANDATORY-GROUPS { hpicfVrrpv3OperGroup,
hpicfVrrpv3TrackGroup,
hpicfVrrpv3BfdGroup}
GROUP hpicfVrrpv3OperGroup
DESCRIPTION "Support for this group is required for HP routers
that support VRRPV3."
GROUP hpicfVrrpv3TrackGroup
DESCRIPTION "Support for this group is required for HP routers
that support Tracking in VRRPV3."
GROUP hpicfVrrpv3BfdGroup
DESCRIPTION "Support for this group is required for HP routers
that support bfd under vrrp session."
::= { hpicfVrrpv3MIBCompliances 1 }
-- ......................................................................
-- Conformance Groups
-- ......................................................................
hpicfVrrpv3OperGroup OBJECT-GROUP
OBJECTS { hpicfVrrpv3IPv4AdminStatus,
hpicfVrrpv3IPv6AdminStatus,
hpicfVrrpv3Version,
hpicfVrrpv3VrMode,
hpicfVrrpv3VrRespondToPing,
hpicfVrrpv3VrPreemptDelayTime,
hpicfVrrpv3VrControl,
hpicfVrrpv3StatsNearFailovers,
hpicfVrrpv3VrNullAuthCompatibility,
hpicfVrrpv3RespondToPing,
hpicfVrrpv3RemoveConfig,
hpicfVrrpv3Nonstop,
hpicfVrrpv3NotificationCntl,
hpicfVrrpv3IPv4RouterChecksumErrors,
hpicfVrrpv3IPv6RouterChecksumErrors,
hpicfVrrpv3IPv4RouterVersionErrors,
hpicfVrrpv3IPv6RouterVersionErrors,
hpicfVrrpv3IPv4RouterVrIdErrors,
hpicfVrrpv3IPv6RouterVrIdErrors
}
STATUS current
DESCRIPTION "A collection of HP proprietary objects to support
VRRPV3 configuration on HP routers."
::= { hpicfVrrpv3MIBGroups 1 }
hpicfVrrpv3TrackGroup OBJECT-GROUP
OBJECTS { hpicfVrrpv3TrackRowStatus }
STATUS current
DESCRIPTION "A collection of HP proprietary objects to support
VRRPV3 configuration on HP routers."
::= { hpicfVrrpv3MIBGroups 2 }
hpicfVrrpv3BfdGroup OBJECT-GROUP
OBJECTS { hpicfVrrpv3VrBfdIPAddr }
STATUS current
DESCRIPTION "A collection of HP proprietary objects to support
BFD configuration on HP routers."
::= { hpicfVrrpv3MIBGroups 3 }
END