Observium_CE/mibs/hp/HP-ICF-PIM

2018 lines
78 KiB
Plaintext

HP-ICF-PIM DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, IpAddress,
Integer32, Unsigned32, TimeTicks, Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue, RowStatus
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
pimComponentEntry, pimRPSetEntry, pimNeighborEntry, pimInterfaceEntry,
pimInterfaceIfIndex, pimRPSetComponent
FROM PIM-MIB
hpSwitch
FROM HP-ICF-OID
InetAddressType, InetAddress, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
ipMRouteEntry, ipMRouteGroup, ipMRouteSource
FROM IPMROUTE-STD-MIB;
hpicfPimMIB MODULE-IDENTITY
LAST-UPDATED "201204120000Z" -- April 12, 2012
ORGANIZATION "HP Networking"
CONTACT-INFO "Hewlett-Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "This MIB module contains HP proprietary
extensions to the standard PIM MIB (RFC 2934)."
REVISION "201204120000Z" -- April 12, 2012
DESCRIPTION "Added hpicfPimScalars to provide global counter data for
PIM-SM Register messages and hpicfPimIfMessageCounterTable
to provide per-interface totals for received, transmitted
and dropped PIM protocol packets.
Extended hpicfPimIfTable to provide more detail on PIM
enabled interfaces.
Extended hpicfPimComponentTable to indicate next scheduled
C-RP Advertisement message time.
Extended hpicfPimStatRpfTable to provide more detail on RPF
Overrides/Multicast Static Routes.
Added hpicfPimVersion to provide the Version number of PIM
on the router.
Added hpicfPimStarGEntries and hpicfPimSGEntries to provide
a count of the number of (*,G) and (S,G) entries in their
respective tables.
Added hpicfPimMRouteTable to extend ipMRouteTable
(RFC 2932) to provide more detail on multicast forwarding
table entries.
Added hpicfPimNeighborTable, which extends pimNeighborTable
(RFC 2934) to provide more detail on known PIM neighbor
routers.
Added hpicfPimTotalNeighborCount to provide a count of all
known PIM neighbors.
Added hpicfPimUcastRouteTable to provide information on
unicast routing information used by PIM.
Added hpicfPimJoinPruneTable to provide information on
Join-Prune protocol messages to be sent across the routers
PIM interfaces.
Added hpicfPimRPSetTable, which extends pimRPSetEntry
(RFC 2934) to provide more detail on PIM-SM RP->Group
mappings.
Added hpicfPimUnackGraftsTable to provide information on
sent-but-unacknowledged PIM-DM Graft messages."
REVISION "201010040000Z" -- October 4, 2010
DESCRIPTION "Added hpicfPimStaticRpfTable to statically configure
reverse path forwarding (RPF) override entries. This
information is currently used in the PIM
sparse mode only."
REVISION "201009010000Z" -- September 1, 2010
DESCRIPTION "Added hpicfPimRemoveConfig to disable PIM and
remove its entire config schema from the switch.
hpicfPimRemoveConfig to the
hpicfhpicfPim object"
REVISION "200508041619Z" -- August 4, 2005
DESCRIPTION "Added PIM-SM objects."
REVISION "200406300000Z" -- June 30, 2004
DESCRIPTION "Initial revision."
::= { hpSwitch 20 }
-- **********************************************************************
-- The PIM MIB Groups
-- **********************************************************************
hpicfPimObjects OBJECT IDENTIFIER ::= { hpicfPimMIB 1 }
hpicfPimTraps OBJECT IDENTIFIER ::= { hpicfPimObjects 0 }
hpicfPim OBJECT IDENTIFIER ::= { hpicfPimObjects 1 }
hpicfPimScalars OBJECT IDENTIFIER ::= { hpicfPimObjects 2 }
hpicfPimConformance OBJECT IDENTIFIER ::= { hpicfPimMIB 2 }
hpicfPimGroups OBJECT IDENTIFIER ::= { hpicfPimConformance 1 }
hpicfPimCompliances OBJECT IDENTIFIER ::= { hpicfPimConformance 2 }
-- **********************************************************************
-- Start of MIB objects
-- **********************************************************************
hpicfPimAdminStatus OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The operational status of the PIM routing protocol
on this router. Default is disabled."
DEFVAL { disable }
::= { hpicfPim 1 }
hpicfPimStateRefreshInterval OBJECT-TYPE
SYNTAX Integer32 (10..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval between successive State Refresh
messages originated by this router.
Its default value is 60 seconds. The maximum value allowed
in PIM for State Refresh interval will be 100."
DEFVAL { 60 }
::= { hpicfPim 2 }
hpicfPimSPTThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies a threshold for switching to the Shortest
Path Tree (SPT) on this router. If the object has
the special value of -1, the Shared Tree rooted to the
Rendezvous Point (RP) will be used indefinitely on the
router. Default is -1."
DEFVAL { -1 }
::= { hpicfPim 3 }
hpicfPimTrapControl OBJECT-TYPE
SYNTAX BITS {
neighborLoss(0),
hardMrtFull(1),
softMrtFull(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether the PIM-enabled router will generate
SNMP traps for PIM events. The set bit means 'enabled'.
- neighborLoss(0)
This bit controls whether the notification trap is
allowed to be sent when the neighbor timer expires
and the router has no other neighbors on the same
interface with a lower IP address than itself.
- hardMrtFull(1)
This bit controls whether the notification trap is
allowed to be sent when the MRT table is full and
the error has been originated by hardware.
- softMrtFull(2)
This bit controls whether the notification trap is
allowed to be sent when the MRT table is full and
the error has been originated by software."
::= { hpicfPim 4 }
-- **********************************************************************
-- The PIM Static RP-Set Table
-- **********************************************************************
hpicfPimStaticRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimStaticRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The (conceptual) table containing statically
configured Rendezvous Points (RPs) for IP multicast
group mappings. This information is being used
in the PIM Sparse mode only."
::= { hpicfPim 5 }
hpicfPimStaticRPSetEntry OBJECT-TYPE
SYNTAX HpicfPimStaticRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry (row) in the hpicfPimStaticRPSetTable.
NOTE: the pimRPSetComponent is an index that uniquely
identifies the component. Each protocol instance
connected to a separate domain should have a different
index value."
INDEX { pimRPSetComponent,
hpicfPimStaticRPSetGroupAddress,
hpicfPimStaticRPSetGroupMask,
hpicfPimStaticRPSetAddress }
::= { hpicfPimStaticRPSetTable 1 }
HpicfPimStaticRPSetEntry ::=
SEQUENCE {
hpicfPimStaticRPSetGroupAddress IpAddress,
hpicfPimStaticRPSetGroupMask IpAddress,
hpicfPimStaticRPSetAddress IpAddress,
hpicfPimStaticRPSetOverride TruthValue,
hpicfPimStaticRPSetRowStatus RowStatus
}
hpicfPimStaticRPSetGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP multicast group address which, when combined
with hpicfPimStaticRPSetGroupMask, gives the group
prefix for which this entry contains information
about the statically configured RP."
::= { hpicfPimStaticRPSetEntry 1 }
hpicfPimStaticRPSetGroupMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The multicast group address mask which, when combined
with hpicfPimStaticRPSetGroupAddress, gives the group
prefix for which this entry contains information about
the statically configured RP."
::= { hpicfPimStaticRPSetEntry 2 }
hpicfPimStaticRPSetAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of statically configured RP for the
given IP multicast group(s)."
::= { hpicfPimStaticRPSetEntry 3 }
hpicfPimStaticRPSetOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If true, indicates that the router should ignore the
information learned by a BSR if there is a conflict
between the information this static entry contains and
the information that is learned by the BSR.
Default is false."
DEFVAL { false }
::= { hpicfPimStaticRPSetEntry 4 }
hpicfPimStaticRPSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { hpicfPimStaticRPSetEntry 5 }
-- **********************************************************************
-- The Extensions to the PIM Interface Table (RFC 2934)
-- **********************************************************************
hpicfPimIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions to the pimInterfaceTable."
::= { hpicfPim 6 }
hpicfPimIfEntry OBJECT-TYPE
SYNTAX HpicfPimIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions for an entry in the pimInterfaceTable."
AUGMENTS { pimInterfaceEntry }
::= { hpicfPimIfTable 1 }
HpicfPimIfEntry ::=
SEQUENCE {
hpicfPimIfAddress IpAddress,
hpicfPimIfTrigHelloInterval Integer32,
hpicfPimIfHelloHoldtime Integer32,
hpicfPimIfLanPruneDelay TruthValue,
hpicfPimIfPropagationDelay Integer32,
hpicfPimIfOverrideInterval Integer32,
hpicfPimIfGenerationID TruthValue,
hpicfPimIfJoinPruneHoldtime Unsigned32,
hpicfPimIfGraftRetryInterval Integer32,
hpicfPimIfMaxGraftRetries Integer32,
hpicfPimIfSRTTLThreshold Unsigned32,
hpicfPimIfLanDelayEnabled TruthValue,
hpicfPimIfSRCapable TruthValue,
hpicfPimIfDRPriority Unsigned32,
hpicfPimIfNBRTimeout Integer32,
hpicfPimIfNBRCount Counter32,
hpicfPimIfNegotiatedPropagationDelay TimeTicks,
hpicfPimIfNegotiatedOverrideInterval TimeTicks,
hpicfPimIfAssertHoldInterval Counter32,
hpicfPimIfNumRoutersNotUsingDRPriority Counter32,
hpicfPimIfNumRoutersNotUsingLanDelay Counter32
}
hpicfPimIfAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This is copy of pimInterfaceAddress with read-create
access. PIM uses this source address to send its
protocol packets out on this interface. This address can
be set to one of IP addresses of the interface or
255.255.255.255 if the address is determined dynamically
based on the current IP configuration.
The currently used source address is value of
pimInterfaceAddress in the latter case."
::= { hpicfPimIfEntry 1 }
hpicfPimIfTrigHelloInterval OBJECT-TYPE
SYNTAX Integer32 (0..5)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The maximum time before a triggered PIM Hello message
is transmitted on this interface. Default is 5 seconds."
DEFVAL { 5 }
::= { hpicfPimIfEntry 2 }
hpicfPimIfHelloHoldtime OBJECT-TYPE
SYNTAX Integer32 (17..1050)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval.
Default is 105 seconds."
DEFVAL { 105 }
::= { hpicfPimIfEntry 3 }
hpicfPimIfLanPruneDelay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Turns the LAN Prune Delay options ON and OFF, on this
interface. Default is true."
DEFVAL { true }
::= { hpicfPimIfEntry 4 }
hpicfPimIfPropagationDelay OBJECT-TYPE
SYNTAX Integer32 (250..2000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface.
Default is 500 milliseconds."
DEFVAL { 500 }
::= { hpicfPimIfEntry 5 }
hpicfPimIfOverrideInterval OBJECT-TYPE
SYNTAX Integer32 (500..6000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface.
Default is 2500 milliseconds."
DEFVAL { 2500 }
::= { hpicfPimIfEntry 6 }
hpicfPimIfGenerationID OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Turns the Generation ID option ON and OFF, on this
interface. Default is false."
DEFVAL { false }
::= { hpicfPimIfEntry 7 }
hpicfPimIfJoinPruneHoldtime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval.
Default is 210 seconds."
DEFVAL { 210 }
::= { hpicfPimIfEntry 8 }
hpicfPimIfGraftRetryInterval OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The interval a PIM router waits for a Graft Ack before
re-sending a Graft on this interface.
Default is 3 seconds."
DEFVAL { 3 }
::= { hpicfPimIfEntry 9 }
hpicfPimIfMaxGraftRetries OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The maximum number of times this router will re-send a
Graft on this interface. Default is 2."
DEFVAL { 2 }
::= { hpicfPimIfEntry 10 }
hpicfPimIfSRTTLThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Time To Live in a PIM-DM State Refresh message at
which it is not forwarded on this interface. Default is 0."
DEFVAL { 0 }
::= { hpicfPimIfEntry 11 }
hpicfPimIfLanDelayEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option."
::= { hpicfPimIfEntry 12 }
hpicfPimIfSRCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option."
::= { hpicfPimIfEntry 13 }
hpicfPimIfDRPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Designated Router Priority inserted into the DR
priority option on this interface. Default is 1."
DEFVAL { 1 }
::= { hpicfPimIfEntry 14 }
hpicfPimIfNBRTimeout OBJECT-TYPE
SYNTAX Integer32 (60..8000)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Time interval after which the router will consider a
neighbor to not be present, if no PIM Hello messages
arrived on the interface. Default is 180 seconds."
DEFVAL { 180 }
::= { hpicfPimIfEntry 15 }
hpicfPimIfNBRCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM Neighbor Count."
::= { hpicfPimIfEntry 16 }
hpicfPimIfNegotiatedPropagationDelay OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Negotiated PIM LAN/Propagation Delay (ms)."
::= { hpicfPimIfEntry 17 }
hpicfPimIfNegotiatedOverrideInterval OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Negotiated PIM Override Interval (ms)."
::= { hpicfPimIfEntry 18 }
hpicfPimIfAssertHoldInterval OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM Assert Hold Interval (s)."
::= { hpicfPimIfEntry 19 }
hpicfPimIfNumRoutersNotUsingDRPriority OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of routers on network not using DR priority."
::= { hpicfPimIfEntry 20 }
hpicfPimIfNumRoutersNotUsingLanDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of routers on network not using LAN Delay."
::= { hpicfPimIfEntry 21 }
-- **********************************************************************
-- The Extensions to the PIM Component Table (RFC 2934)
-- **********************************************************************
hpicfPimComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions to the pimComponentTable - the
(conceptual) table containing objects specific to a
PIM domain. One row exists for each domain to which
the router is connected. Typically, a PIM-SM router
will be a member of exactly one domain, however, the
table also supports routers which may form a border
between two PIM-SM domains and do not forward Bootstrap
messages between them."
::= { hpicfPim 7 }
hpicfPimComponentEntry OBJECT-TYPE
SYNTAX HpicfPimComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions for an entry in the pimComponentTable."
AUGMENTS { pimComponentEntry }
::= { hpicfPimComponentTable 1 }
HpicfPimComponentEntry ::=
SEQUENCE {
-- ------------------
-- read-write objects
-- ------------------
hpicfPimComponentCBSRAdminStatus INTEGER,
hpicfPimComponentCBSRAddress IpAddress,
hpicfPimComponentCBSRPriority Integer32,
hpicfPimComponentCBSRHashMaskLength Integer32,
hpicfPimComponentCBSRMessageInterval Integer32,
hpicfPimComponentCRPPriority Integer32,
-- ------------------
-- read-only objects
-- ------------------
hpicfPimComponentCRPAdvInterval Unsigned32,
hpicfPimComponentBSRPriority Unsigned32,
hpicfPimComponentBSRHashMaskLength Unsigned32,
hpicfPimComponentBSRUpTime TimeTicks,
hpicfPimComponentBSRNextMessage TimeTicks,
hpicfPimComponentCRPAdvTimer TimeTicks
}
hpicfPimComponentCBSRAdminStatus OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This objects specifies whether or not the router
configured to be a Candidate BSR for the local
PIM region. Default is disabled."
DEFVAL { disable }
::= { hpicfPimComponentEntry 1 }
hpicfPimComponentCBSRAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The IP address the Candidate BSR router will advertise
for the local PIM region."
::= { hpicfPimComponentEntry 2 }
hpicfPimComponentCBSRPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The priority for Candidate BSR router. In BSR election
process the candidate BSR with the highest (numerically
bigger) priority becomes the BSR. If the priority values
are the same, the router with the larger IP address is
the BSR. Default is 0."
DEFVAL { 0 }
::= { hpicfPimComponentEntry 3 }
hpicfPimComponentCBSRHashMaskLength OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the length (in bits) of a multicast group
address to use when mapping a group to one of the
candidate RPs from the RP-Set whose group-prefix
includes the group. The recommended value for IPv4
is 30, for IPv6 is 126. Default is 30."
DEFVAL { 30 }
::= { hpicfPimComponentEntry 4 }
hpicfPimComponentCBSRMessageInterval OBJECT-TYPE
SYNTAX Integer32 (5..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If this router is the elected BSR, this object
is the interval for sending (multicast out) periodic
Bootstrap (RP-Set) messages on all PIM SM interfaces.
The acceptable range is 5-300. The default value of this
object is 60 seconds."
DEFVAL { 60 }
::= { hpicfPimComponentEntry 5 }
hpicfPimComponentCRPPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The priority for the Candidate RP for the local PIM
domain. Determines which Candidate RPs get selected by
the BSR to be in the RP Set. The smaller value means
the higher priority (a value of zero is the highest
possible priority). Default is 192."
DEFVAL { 192 }
::= { hpicfPimComponentEntry 6 }
hpicfPimComponentCRPAdvInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The interval at which the Candidate RP transmits
(unicast to the elected BSR) advertise messages in
the local PIM domain."
::= { hpicfPimComponentEntry 7 }
hpicfPimComponentBSRPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The priority of the Bootstrap Router (BSR) elected
for the local PIM region."
::= { hpicfPimComponentEntry 8 }
hpicfPimComponentBSRHashMaskLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hash mask length of the elected Bootstrap
Router (BSR)."
::= { hpicfPimComponentEntry 9 }
hpicfPimComponentBSRUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Length of time that the elected Bootstrap Router (BSR)
has been up."
::= { hpicfPimComponentEntry 10 }
hpicfPimComponentBSRNextMessage OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time in which the next bootstrap message is due from
the elected Bootstrap Router (BSR)."
::= { hpicfPimComponentEntry 11 }
hpicfPimComponentCRPAdvTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Next scheduled Candidate RP Advertisement."
::= { hpicfPimComponentEntry 12 }
hpicfPimRemoveConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "PIM is halted. This objects clears all existing PIM
configuration, intializes the pim config to the default
state. SnmpGet on this will always return false.
An SnmpSet of false has no effect."
DEFVAL { false }
::= { hpicfPim 8 }
-- **********************************************************************
-- HP PIM Static RPF Override table
-- **********************************************************************
hpicfPimStaticRpfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimStaticRpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The (conceptual) table containing statically configured
reverse path forwarding (RPF) source address to interface
mappings. This information is currently used in the PIM
sparse mode only."
::= { hpicfPim 9 }
hpicfPimStaticRpfEntry OBJECT-TYPE
SYNTAX HpicfPimStaticRpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row in the hpicfPimStaticRpfTable."
INDEX { hpicfPimStaticRpfSourceAddressType,
hpicfPimStaticRpfSourceAddress,
hpicfPimStaticRpfSourcePrefixLength,
hpicfPimStaticRpfAddressType,
hpicfPimStaticRpfAddress }
::= { hpicfPimStaticRpfTable 1 }
HpicfPimStaticRpfEntry ::=
SEQUENCE {
hpicfPimStaticRpfSourceAddressType InetAddressType,
hpicfPimStaticRpfSourceAddress InetAddress,
hpicfPimStaticRpfSourcePrefixLength InetAddressPrefixLength,
hpicfPimStaticRpfAddressType InetAddressType,
hpicfPimStaticRpfAddress InetAddress,
hpicfPimStaticRpfRowStatus RowStatus,
hpicfPimStaticRpfOverrideState INTEGER,
hpicfPimStaticRpfIfIndex InterfaceIndex,
hpicfPimStaticRpfNeighborAddressType InetAddressType,
hpicfPimStaticRpfNeighborAddress InetAddress
}
hpicfPimStaticRpfSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address type of the statically configured
multicast source."
::= { hpicfPimStaticRpfEntry 1}
hpicfPimStaticRpfSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of the statically configured
multicast source."
::= { hpicfPimStaticRpfEntry 2}
hpicfPimStaticRpfSourcePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The prefix length of the statically
configured multicast source."
::= { hpicfPimStaticRpfEntry 3}
hpicfPimStaticRpfAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The type of RPF address for this route.
The value of this object must be equal to a value
appropriate for the corresponding instance of the
hpicfPimStaticRpfSourceAddressType object."
::= { hpicfPimStaticRpfEntry 4}
hpicfPimStaticRpfAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of the interface to use for RPF
checks."
::= { hpicfPimStaticRpfEntry 5}
hpicfPimStaticRpfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { hpicfPimStaticRpfEntry 6}
hpicfPimStaticRpfOverrideState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inActive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The state of this RPF override entry."
::= { hpicfPimStaticRpfEntry 7}
hpicfPimStaticRpfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of the Interface towards the RPF neighbor."
::= { hpicfPimStaticRpfEntry 8 }
hpicfPimStaticRpfNeighborAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address type of the statically configured
RPF neighbor."
::= { hpicfPimStaticRpfEntry 9 }
hpicfPimStaticRpfNeighborAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address of the static RPF Neighbor."
::= { hpicfPimStaticRpfEntry 10 }
-- **********************************************************************
-- Sum total of entries in hpicfPimStaticRpfTable
-- **********************************************************************
hpicfPimNumStaticRpfEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of Static RPF entries."
::= { hpicfPim 10 }
hpicfPimVersion OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Currently running PIM Version."
::= { hpicfPim 11 }
hpicfPimStarGEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of entries in the (*,G) table"
::= { hpicfPim 12 }
hpicfPimSGEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of entries in the (S,G) table."
::= { hpicfPim 13 }
-- **********************************************************************
-- Extensions to the ipMRouteEntry table (RFC 2932)
-- **********************************************************************
hpicfPimMRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions to rfc2932's ipMRouteEntry table."
::= { hpicfPim 14 }
hpicfPimMRouteEntry OBJECT-TYPE
SYNTAX HpicfPimMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions for an entry in ipMRouteEntry."
AUGMENTS { ipMRouteEntry }
::= { hpicfPimMRouteTable 1 }
HpicfPimMRouteEntry ::=
SEQUENCE {
hpicfPimSendRegStop TruthValue,
hpicfPimSGSourceIsActive TruthValue,
hpicfPimOutgoingRegisterIfAvailable TruthValue,
hpicfPimEntryAddSuccess TruthValue,
hpicfPimNumOutgoingInterfaces Counter32,
hpicfPimDirectlyConnectedSource TruthValue,
hpicfPimNeighborSearchFailure TruthValue,
hpicfPimRPTreePruneSent TruthValue,
hpicfPimOnSPTree TruthValue,
hpicfPimRPToSPTreeSwitching TruthValue,
hpicfPimWildcardEntry TruthValue,
hpicfPimRPFPrimeNeighborAddressType InetAddressType,
hpicfPimRPFPrimeNeighborAddress InetAddress,
hpicfPimNumDownstreams Counter32
}
hpicfPimSendRegStop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates that a register-stop message must be sent."
::= { hpicfPimMRouteEntry 1 }
hpicfPimSGSourceIsActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether the multicast source
corresponding to the (S,G) is active."
::= { hpicfPimMRouteEntry 2 }
hpicfPimOutgoingRegisterIfAvailable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates that a register outgoing
interface is available."
::= { hpicfPimMRouteEntry 3 }
hpicfPimEntryAddSuccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates that an entry has been
successfully added."
::= { hpicfPimMRouteEntry 4 }
hpicfPimNumOutgoingInterfaces OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of outgoing interfaces."
::= { hpicfPimMRouteEntry 5 }
hpicfPimDirectlyConnectedSource OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies PIM routing entries on routers
directly connecting to the same subnet with the
multicast source."
::= { hpicfPimMRouteEntry 6 }
hpicfPimNeighborSearchFailure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies PIM routing entries with PIM
neighbor searching failure."
::= { hpicfPimMRouteEntry 7 }
hpicfPimRPTreePruneSent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies PIM routing entries on RPT branches
where (S, G) prunes have been sent to the RP."
::= { hpicfPimMRouteEntry 8 }
hpicfPimOnSPTree OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies PIM routing entries on the SPT."
::= { hpicfPimMRouteEntry 9 }
hpicfPimRPToSPTreeSwitching OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies PIM routing entries in the process of
RPT-to-SPT switchover."
::= { hpicfPimMRouteEntry 10 }
hpicfPimWildcardEntry OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies wildcard routing entries."
::= { hpicfPimMRouteEntry 11 }
hpicfPimRPFPrimeNeighborAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RPF Prime Neighbor address type"
::= { hpicfPimMRouteEntry 12 }
hpicfPimRPFPrimeNeighborAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RPF Prime Neighbor address"
::= { hpicfPimMRouteEntry 13 }
hpicfPimNumDownstreams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of downstreams."
::= { hpicfPimMRouteEntry 14 }
-- **********************************************************************
-- Sum total of the entries in hpicfPimNeighborTable
-- **********************************************************************
hpicfPimTotalNeighborCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM Neighbor Count."
::= { hpicfPim 15 }
-- **********************************************************************
-- Extensions to the PIM Neighbor Table (RFC 2934)
-- **********************************************************************
hpicfPimNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions to the pimNeighborTable."
::= { hpicfPim 16 }
hpicfPimNeighborEntry OBJECT-TYPE
SYNTAX HpicfPimNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "HP extensions for an entry in the pimNeighborTable."
AUGMENTS { pimNeighborEntry }
::= { hpicfPimNeighborTable 1 }
HpicfPimNeighborEntry ::=
SEQUENCE {
hpicfPimNeighborDRPriority Counter32,
hpicfPimNeighborGenerationIDValue Counter32,
hpicfPimNeighborHoldtime Counter32,
hpicfPimNeighborPropagationDelay Counter32,
hpicfPimNeighborOverrideInterval Counter32,
hpicfPimNeighborStateRefreshInterval Counter32
}
hpicfPimNeighborDRPriority OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM Neighbor Router's Designated Router Priority value."
::= { hpicfPimNeighborEntry 1 }
hpicfPimNeighborGenerationIDValue OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM Neighbor Router's Generation ID value."
::= { hpicfPimNeighborEntry 2 }
hpicfPimNeighborHoldtime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM Neighbor Router's Hold Time value."
::= { hpicfPimNeighborEntry 3 }
hpicfPimNeighborPropagationDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM Neighbor Router's LAN Delay value."
::= { hpicfPimNeighborEntry 4 }
hpicfPimNeighborOverrideInterval OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM Neighbor Router's Override Interval value."
::= { hpicfPimNeighborEntry 5 }
hpicfPimNeighborStateRefreshInterval OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM Neighbor Router's State Refresh Interval value."
::= { hpicfPimNeighborEntry 6 }
-- **********************************************************************
-- PIM-cached unicast routing data relevant to PIM operation.
-- **********************************************************************
hpicfPimUcastRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimUcastRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Cached Unicast Route related to PIM."
::= { hpicfPim 17 }
hpicfPimUcastRouteEntry OBJECT-TYPE
SYNTAX HpicfPimUcastRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in pimUcastRouteTable."
INDEX { hpicfPimUcastRouteAddressType,
hpicfPimUcastRouteAddress,
hpicfPimUcastRoutePrefix }
::= { hpicfPimUcastRouteTable 1 }
HpicfPimUcastRouteEntry ::=
SEQUENCE {
hpicfPimUcastRouteAddressType InetAddressType,
hpicfPimUcastRouteAddress InetAddress,
hpicfPimUcastRoutePrefix Unsigned32,
hpicfPimUcastRouteIfIndex InterfaceIndex,
hpicfPimUcastRouteUpstreamNbrType InetAddressType,
hpicfPimUcastRouteUpstreamNbr InetAddress,
hpicfPimUcastRouteProtocol Unsigned32
}
hpicfPimUcastRouteAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Address family of a Unicast IP Address
of a Source or network."
::= { hpicfPimUcastRouteEntry 1 }
hpicfPimUcastRouteAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unicast IP Address of a Source or network."
::= { hpicfPimUcastRouteEntry 2 }
hpicfPimUcastRoutePrefix OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Network Prefix length in bits of the address."
::= { hpicfPimUcastRouteEntry 3 }
hpicfPimUcastRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of the Interface towards the source/network."
::= { hpicfPimUcastRouteEntry 4 }
hpicfPimUcastRouteUpstreamNbrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Address type of the PIM neighbor on
Interface towards the source/network."
::= { hpicfPimUcastRouteEntry 5 }
hpicfPimUcastRouteUpstreamNbr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Address of the PIM neighbor on the
Interface towards the source/network."
::= { hpicfPimUcastRouteEntry 6 }
hpicfPimUcastRouteProtocol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unicast routing protocol through which the route
was learned."
::= { hpicfPimUcastRouteEntry 7 }
-- **********************************************************************
-- Per-interface / neighbor Join-Prune messages to be sent.
-- **********************************************************************
hpicfPimJoinPruneTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimJoinPruneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Info on Join-Prune messages to send"
::= { hpicfPim 18 }
hpicfPimJoinPruneEntry OBJECT-TYPE
SYNTAX HpicfPimJoinPruneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in hpicfPimJoinPruneTable."
INDEX { hpicfPimJoinPruneInterface,
hpicfPimJoinPruneInterfaceState,
hpicfPimJoinPruneSourceType,
hpicfPimJoinPruneSourceAddress,
hpicfPimJoinPruneGroupType,
hpicfPimJoinPruneGroupAddress }
::= { hpicfPimJoinPruneTable 1 }
HpicfPimJoinPruneEntry ::=
SEQUENCE {
hpicfPimJoinPruneInterface InterfaceIndex,
hpicfPimJoinPruneInterfaceState INTEGER,
hpicfPimJoinPruneSourceType InetAddressType,
hpicfPimJoinPruneSourceAddress InetAddress,
hpicfPimJoinPruneGroupType InetAddressType,
hpicfPimJoinPruneGroupAddress InetAddress,
hpicfPimJoinPruneNeighborAddressType InetAddressType,
hpicfPimJoinPruneNeighborAddress InetAddress,
hpicfPimJoinPruneExpiryTime Unsigned32
}
hpicfPimJoinPruneInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface on which Join-Prune messages will be sent."
::= { hpicfPimJoinPruneEntry 1 }
hpicfPimJoinPruneInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
join (1),
prune (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flag indicating a (S,G)/(*,G) join
or (S,G,Rpt) prune."
::= { hpicfPimJoinPruneEntry 2 }
hpicfPimJoinPruneSourceType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow source address type for a (S,G) join
or (S,G,Rpt) prune."
::= { hpicfPimJoinPruneEntry 3 }
hpicfPimJoinPruneSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow source address for a (S,G) join
or (S,G,Rpt) prune."
::= { hpicfPimJoinPruneEntry 4 }
hpicfPimJoinPruneGroupType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow group address type for a (S,G)/(*,G)
join or (S,G,Rpt) prune."
::= { hpicfPimJoinPruneEntry 5 }
hpicfPimJoinPruneGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow group address for a (S,G)/(*,G) join
or (S,G,Rpt) prune."
::= { hpicfPimJoinPruneEntry 6 }
hpicfPimJoinPruneNeighborAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM neighbor router address type towards the
source/RP to which Join-Prune messages are sent."
::= { hpicfPimJoinPruneEntry 7 }
hpicfPimJoinPruneNeighborAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM neighbor router address towards the source/RP
to which Join-Prune messages are sent."
::= { hpicfPimJoinPruneEntry 8 }
hpicfPimJoinPruneExpiryTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expiry time of sending Join-Prune messages."
::= { hpicfPimJoinPruneEntry 9 }
-- **********************************************************************
-- HP Extensions to rfc2943 pimRPSetEntry
-- **********************************************************************
hpicfPimRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Extensions to rfc2943's pimRPSetTable."
::= { hpicfPim 19 }
hpicfPimRPSetEntry OBJECT-TYPE
SYNTAX HpicfPimRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in pimUcastRouteTable."
AUGMENTS { pimRPSetEntry }
::= { hpicfPimRPSetTable 1 }
HpicfPimRPSetEntry ::=
SEQUENCE {
hpicfPimRPSetPriority Counter32,
hpicfPimRPSetUptime TimeTicks
}
hpicfPimRPSetPriority OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RP Set Priority."
::= { hpicfPimRPSetEntry 1 }
hpicfPimRPSetUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time RP has been up."
::= { hpicfPimRPSetEntry 2 }
-- **********************************************************************
-- HP PIM per-interface counters
-- **********************************************************************
hpicfPimIfMessageCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimIfMessageCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of per-interface message counters."
::= { hpicfPim 20 }
hpicfPimIfMessageCounterEntry OBJECT-TYPE
SYNTAX HpicfPimIfMessageCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in hpicfPimIfMessageCounterTable."
INDEX { pimInterfaceIfIndex }
::= { hpicfPimIfMessageCounterTable 1 }
HpicfPimIfMessageCounterEntry ::=
SEQUENCE {
hpicfPimIfMsgCountAssertReceive Counter32,
hpicfPimIfMsgCountAssertTransmit Counter32,
hpicfPimIfMsgCountAssertInvalid Counter32,
hpicfPimIfMsgCountGraftReceive Counter32,
hpicfPimIfMsgCountGraftTransmit Counter32,
hpicfPimIfMsgCountGraftInvalid Counter32,
hpicfPimIfMsgCountGraftAckReceive Counter32,
hpicfPimIfMsgCountGraftAckTransmit Counter32,
hpicfPimIfMsgCountGraftAckInvalid Counter32,
hpicfPimIfMsgCountHelloReceive Counter32,
hpicfPimIfMsgCountHelloTransmit Counter32,
hpicfPimIfMsgCountHelloInvalid Counter32,
hpicfPimIfMsgCountJPReceive Counter32,
hpicfPimIfMsgCountJPTransmit Counter32,
hpicfPimIfMsgCountJPInvalid Counter32,
hpicfPimIfMsgCountSRReceive Counter32,
hpicfPimIfMsgCountSRTransmit Counter32,
hpicfPimIfMsgCountSRInvalid Counter32,
hpicfPimIfMsgCountBSRReceive Counter32,
hpicfPimIfMsgCountBSRTransmit Counter32,
hpicfPimIfMsgCountBSRInvalid Counter32,
hpicfPimIfMsgCountCRPReceive Counter32,
hpicfPimIfMsgCountCRPTransmit Counter32,
hpicfPimIfMsgCountCRPInvalid Counter32
}
hpicfPimIfMsgCountAssertReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
received Assert messages."
::= { hpicfPimIfMessageCounterEntry 1 }
hpicfPimIfMsgCountAssertTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
transmitted Assert messages."
::= { hpicfPimIfMessageCounterEntry 2 }
hpicfPimIfMsgCountAssertInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of invalid
Assert messages received."
::= { hpicfPimIfMessageCounterEntry 3 }
hpicfPimIfMsgCountGraftReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
received Graft messages."
::= { hpicfPimIfMessageCounterEntry 4 }
hpicfPimIfMsgCountGraftTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
transmitted Graft messages."
::= { hpicfPimIfMessageCounterEntry 5 }
hpicfPimIfMsgCountGraftInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of invalid
Graft messages received."
::= { hpicfPimIfMessageCounterEntry 6 }
hpicfPimIfMsgCountGraftAckReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
received Graft-Ack messages."
::= { hpicfPimIfMessageCounterEntry 7 }
hpicfPimIfMsgCountGraftAckTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
transmitted Graft-Ack messages."
::= { hpicfPimIfMessageCounterEntry 8 }
hpicfPimIfMsgCountGraftAckInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of invalid
Graft-Ack messages received."
::= { hpicfPimIfMessageCounterEntry 9 }
hpicfPimIfMsgCountHelloReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
received HELLO messages."
::= { hpicfPimIfMessageCounterEntry 10 }
hpicfPimIfMsgCountHelloTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
transmitted HELLO messages."
::= { hpicfPimIfMessageCounterEntry 11 }
hpicfPimIfMsgCountHelloInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of invalid
HELLO messages received."
::= { hpicfPimIfMessageCounterEntry 12 }
hpicfPimIfMsgCountJPReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
received Join-Prune messages."
::= { hpicfPimIfMessageCounterEntry 13 }
hpicfPimIfMsgCountJPTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
transmitted Join-Prune messages."
::= { hpicfPimIfMessageCounterEntry 14 }
hpicfPimIfMsgCountJPInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of invalid
Join-Prune messages received."
::= { hpicfPimIfMessageCounterEntry 15 }
hpicfPimIfMsgCountSRReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
received State-Refresh messages."
::= { hpicfPimIfMessageCounterEntry 16 }
hpicfPimIfMsgCountSRTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of transmitted
State-Refresh messages."
::= { hpicfPimIfMessageCounterEntry 17 }
hpicfPimIfMsgCountSRInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of invalid
State-Refresh messages received."
::= { hpicfPimIfMessageCounterEntry 18 }
hpicfPimIfMsgCountBSRReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
received BSR messages."
::= { hpicfPimIfMessageCounterEntry 19 }
hpicfPimIfMsgCountBSRTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
transmitted BSR messages."
::= { hpicfPimIfMessageCounterEntry 20 }
hpicfPimIfMsgCountBSRInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of invalid
BSR messages received."
::= { hpicfPimIfMessageCounterEntry 21 }
hpicfPimIfMsgCountCRPReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
received Candidate-RP messages."
::= { hpicfPimIfMessageCounterEntry 22 }
hpicfPimIfMsgCountCRPTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of
transmitted Candidate-RP messages."
::= { hpicfPimIfMessageCounterEntry 23 }
hpicfPimIfMsgCountCRPInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Per-interface count of invalid
Candidate-RP messages received."
::= { hpicfPimIfMessageCounterEntry 24 }
-- **********************************************************************
-- HP 'display pim grafts' extension
-- **********************************************************************
hpicfPimUnackGraftsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfPimUnackGraftsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about unacknowledged graft messages on the network."
::= { hpicfPim 21 }
hpicfPimUnackGraftsEntry OBJECT-TYPE
SYNTAX HpicfPimUnackGraftsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in hpicfPimUnackGraftsTable."
INDEX { hpicfPimUnackGraftSourceType,
hpicfPimUnackGraftSource,
hpicfPimUnackGraftGroupType,
hpicfPimUnackGraftGroup }
::= { hpicfPimUnackGraftsTable 1 }
HpicfPimUnackGraftsEntry ::=
SEQUENCE {
hpicfPimUnackGraftSourceType InetAddressType,
hpicfPimUnackGraftSource InetAddress,
hpicfPimUnackGraftGroupType InetAddressType,
hpicfPimUnackGraftGroup InetAddress,
hpicfPimUnackGraftAge Counter32,
hpicfPimUnackGraftRetransIn Counter32
}
hpicfPimUnackGraftSourceType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow Source address type for an unacknowledged
Graft message on the network."
::= { hpicfPimUnackGraftsEntry 1 }
hpicfPimUnackGraftSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow Source address for an unacknowledged
Graft message on the network."
::= { hpicfPimUnackGraftsEntry 2 }
hpicfPimUnackGraftGroupType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow Group address type for an unacknowledged
Graft message on the network."
::= { hpicfPimUnackGraftsEntry 3 }
hpicfPimUnackGraftGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow Group address for an unacknowledged graft
message on the network."
::= { hpicfPimUnackGraftsEntry 4 }
hpicfPimUnackGraftAge OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time in which the graft message
will be timed-out."
::= { hpicfPimUnackGraftsEntry 5 }
hpicfPimUnackGraftRetransIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time in which the graft message
will be retransmitted."
::= { hpicfPimUnackGraftsEntry 6 }
-- **********************************************************************
-- HP PIM global counters
-- **********************************************************************
hpicfPimMsgCountRegisterReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global count of received
Register messages."
::= { hpicfPimScalars 1 }
hpicfPimMsgCountRegisterTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global count of transmitted
Register messages."
::= { hpicfPimScalars 2 }
hpicfPimMsgCountRegisterInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global count of invalid
Register messages received."
::= { hpicfPimScalars 3 }
hpicfPimMsgCountRegStopReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global count of received
Register-stop messages."
::= { hpicfPimScalars 4 }
hpicfPimMsgCountRegStopTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global count of transmitted
Register-stop messages."
::= { hpicfPimScalars 5 }
hpicfPimMsgCountRegStopInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global count of invalid
Register-stop messages received."
::= { hpicfPimScalars 6 }
-- **********************************************************************
-- PIM Notifications Trap Definitions
-- **********************************************************************
hpicfPimHardMRTFull NOTIFICATION-TYPE
STATUS current
DESCRIPTION "This notification signifies that the MRT table is
full and the error has been originated by hardware.
This trap should be generated whenever a multicast
flow or MRT entry cannot be added."
::= { hpicfPimTraps 1 }
hpicfPimSoftMRTFull NOTIFICATION-TYPE
STATUS current
DESCRIPTION "This notification signifies that the MRT table is
full and the error has been originated by software.
This trap should be generated whenever a multicast
flow or MRT entry cannot be added."
::= { hpicfPimTraps 2 }
-- **********************************************************************
-- Conformance Information
-- **********************************************************************
hpicfPimNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{ hpicfPimHardMRTFull,
hpicfPimSoftMRTFull }
STATUS current
DESCRIPTION "A collection of notifications that extends
notifications defined in RFC 2934 - used for signaling
important PIM events."
::= { hpicfPimGroups 1 }
hpicfPimBaseGroup OBJECT-GROUP
OBJECTS { hpicfPimAdminStatus,
hpicfPimStateRefreshInterval,
hpicfPimSPTThreshold,
hpicfPimTrapControl,
hpicfPimRemoveConfig }
STATUS current
DESCRIPTION "A collection of objects to support basic PIM
configuration information on HP routers."
::= { hpicfPimGroups 2 }
hpicfPimStaticRPSetMappingGroup OBJECT-GROUP
OBJECTS { hpicfPimStaticRPSetOverride,
hpicfPimStaticRPSetRowStatus }
STATUS current
DESCRIPTION "A collection of objects to support management of
static Rendezvous Point (RP) to IP multicast group
mappings."
::= { hpicfPimGroups 3 }
hpicfPimSparseIfGroup OBJECT-GROUP
OBJECTS { hpicfPimIfAddress,
hpicfPimIfTrigHelloInterval,
hpicfPimIfHelloHoldtime,
hpicfPimIfLanPruneDelay,
hpicfPimIfPropagationDelay,
hpicfPimIfOverrideInterval,
hpicfPimIfGenerationID,
hpicfPimIfJoinPruneHoldtime,
hpicfPimIfLanDelayEnabled,
hpicfPimIfDRPriority,
hpicfPimIfNBRTimeout }
STATUS current
DESCRIPTION "A collection of objects that extends objects defined
in pimInterfaceTable and used to support management of
interfaces operating in PIM Sparse Mode."
::= { hpicfPimGroups 4 }
hpicfPimDenseIfGroup OBJECT-GROUP
OBJECTS { hpicfPimIfAddress,
hpicfPimIfTrigHelloInterval,
hpicfPimIfHelloHoldtime,
hpicfPimIfLanPruneDelay,
hpicfPimIfPropagationDelay,
hpicfPimIfOverrideInterval,
hpicfPimIfGenerationID,
hpicfPimIfJoinPruneHoldtime,
hpicfPimIfGraftRetryInterval,
hpicfPimIfMaxGraftRetries,
hpicfPimIfSRTTLThreshold,
hpicfPimIfLanDelayEnabled,
hpicfPimIfSRCapable,
hpicfPimIfDRPriority }
STATUS current
DESCRIPTION "A collection of objects that extends objects defined
in pimInterfaceTable and used to support management of
interfaces operating in PIM Dense Mode."
::= { hpicfPimGroups 5 }
hpicfPimComponentGroup OBJECT-GROUP
OBJECTS { hpicfPimComponentCBSRAdminStatus,
hpicfPimComponentCBSRAddress,
hpicfPimComponentCBSRPriority,
hpicfPimComponentCBSRHashMaskLength,
hpicfPimComponentCBSRMessageInterval,
hpicfPimComponentCRPPriority,
hpicfPimComponentCRPAdvInterval,
hpicfPimComponentBSRPriority,
hpicfPimComponentBSRHashMaskLength,
hpicfPimComponentBSRUpTime,
hpicfPimComponentBSRNextMessage }
STATUS current
DESCRIPTION "A collection of objects that extends objects defined
in pimComponentTable (RFC 2934)."
::= { hpicfPimGroups 6 }
hpicfPimStaticRpfGroup OBJECT-GROUP
OBJECTS {
hpicfPimStaticRpfOverrideState,
hpicfPimStaticRpfRowStatus }
STATUS current
DESCRIPTION "A collection of objects defined
in hpicfPimStaticRpfTable."
::= { hpicfPimGroups 7 }
hpicfPimInterfaceExtensionsGroup OBJECT-GROUP
OBJECTS { hpicfPimVersion,
hpicfPimIfNBRCount,
hpicfPimIfNegotiatedPropagationDelay,
hpicfPimIfNegotiatedOverrideInterval,
hpicfPimIfAssertHoldInterval,
hpicfPimIfNumRoutersNotUsingDRPriority,
hpicfPimIfNumRoutersNotUsingLanDelay,
hpicfPimIfMsgCountGraftReceive,
hpicfPimIfMsgCountGraftTransmit,
hpicfPimIfMsgCountGraftInvalid,
hpicfPimIfMsgCountGraftAckReceive,
hpicfPimIfMsgCountGraftAckTransmit,
hpicfPimIfMsgCountGraftAckInvalid,
hpicfPimIfMsgCountSRReceive,
hpicfPimIfMsgCountSRTransmit,
hpicfPimIfMsgCountSRInvalid,
hpicfPimIfMsgCountBSRReceive,
hpicfPimIfMsgCountBSRTransmit,
hpicfPimIfMsgCountBSRInvalid,
hpicfPimIfMsgCountCRPReceive,
hpicfPimIfMsgCountCRPTransmit,
hpicfPimIfMsgCountCRPInvalid,
hpicfPimIfMsgCountJPReceive,
hpicfPimIfMsgCountJPTransmit,
hpicfPimIfMsgCountJPInvalid,
hpicfPimIfMsgCountAssertReceive,
hpicfPimIfMsgCountAssertTransmit,
hpicfPimIfMsgCountAssertInvalid,
hpicfPimIfMsgCountHelloReceive,
hpicfPimIfMsgCountHelloTransmit,
hpicfPimIfMsgCountHelloInvalid }
STATUS current
DESCRIPTION "A collection of objects that extends objects defined
in pimInterfaceTable."
::= { hpicfPimGroups 8 }
hpicfPimStaticRpfExtensionsGroup OBJECT-GROUP
OBJECTS {
hpicfPimStaticRpfIfIndex,
hpicfPimStaticRpfNeighborAddressType,
hpicfPimStaticRpfNeighborAddress,
hpicfPimNumStaticRpfEntries }
STATUS current
DESCRIPTION "A collection of objects that
extend hpicfPimStaticRpfTable."
::= { hpicfPimGroups 9 }
hpicfPimNeighborGroup OBJECT-GROUP
OBJECTS {
hpicfPimNeighborDRPriority,
hpicfPimNeighborGenerationIDValue,
hpicfPimNeighborHoldtime,
hpicfPimNeighborPropagationDelay,
hpicfPimNeighborOverrideInterval,
hpicfPimNeighborStateRefreshInterval }
STATUS current
DESCRIPTION "A collection of objects defined
in hpicfPimNeighborTable."
::= { hpicfPimGroups 10 }
hpicfPimMRouteGroup OBJECT-GROUP
OBJECTS {
hpicfPimSendRegStop,
hpicfPimSGSourceIsActive,
hpicfPimOutgoingRegisterIfAvailable,
hpicfPimEntryAddSuccess,
hpicfPimNumOutgoingInterfaces,
hpicfPimDirectlyConnectedSource,
hpicfPimNeighborSearchFailure,
hpicfPimRPTreePruneSent,
hpicfPimOnSPTree,
hpicfPimRPToSPTreeSwitching,
hpicfPimWildcardEntry,
hpicfPimRPFPrimeNeighborAddressType,
hpicfPimRPFPrimeNeighborAddress,
hpicfPimNumDownstreams }
STATUS current
DESCRIPTION "A collection of objects defined
in hpicfMRouteTable."
::= { hpicfPimGroups 11 }
hpicfPimUcastRouteGroup OBJECT-GROUP
OBJECTS {
hpicfPimUcastRouteIfIndex,
hpicfPimUcastRouteUpstreamNbrType,
hpicfPimUcastRouteUpstreamNbr,
hpicfPimUcastRouteProtocol }
STATUS current
DESCRIPTION "A collection of objects defined
in hpicfUcastRouteTable."
::= { hpicfPimGroups 12 }
hpicfPimUnackGraftsGroup OBJECT-GROUP
OBJECTS {
hpicfPimUnackGraftAge,
hpicfPimUnackGraftRetransIn }
STATUS current
DESCRIPTION "A collection of objects defined
in hpicfUnackGraftTable."
::= { hpicfPimGroups 13 }
hpicfPimGlobalCounterGroup OBJECT-GROUP
OBJECTS {
hpicfPimMsgCountRegisterReceive,
hpicfPimMsgCountRegisterTransmit,
hpicfPimMsgCountRegisterInvalid,
hpicfPimMsgCountRegStopReceive,
hpicfPimMsgCountRegStopTransmit,
hpicfPimMsgCountRegStopInvalid,
hpicfPimStarGEntries,
hpicfPimSGEntries,
hpicfPimTotalNeighborCount }
STATUS current
DESCRIPTION "A collection of global
PIM counter objects."
::= { hpicfPimGroups 14 }
hpicfPimRPSetGroup OBJECT-GROUP
OBJECTS {
hpicfPimRPSetPriority,
hpicfPimRPSetUptime,
hpicfPimComponentCRPAdvTimer }
STATUS current
DESCRIPTION "A collection of additional RP & BSR objects."
::= { hpicfPimGroups 15 }
hpicfPimJoinPruneGroup OBJECT-GROUP
OBJECTS {
hpicfPimJoinPruneNeighborAddressType,
hpicfPimJoinPruneNeighborAddress,
hpicfPimJoinPruneExpiryTime }
STATUS current
DESCRIPTION "A collection of objects defined in hpicfPimJoinPruneTable."
::= { hpicfPimGroups 17 }
-- **********************************************************************
-- Compliance statements
-- **********************************************************************
hpicfPimSparseMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers running
PIM Sparse Mode and implementing the HP-ICF-PIM MIB."
MODULE -- this module
MANDATORY-GROUPS { hpicfPimBaseGroup,
hpicfPimStaticRPSetMappingGroup,
hpicfPimSparseIfGroup,
hpicfPimComponentGroup,
hpicfPimStaticRpfGroup }
::= { hpicfPimCompliances 1 }
hpicfPimDenseMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers running
PIM Dense Mode and implementing the HP-ICF-PIM MIB."
MODULE -- this module
MANDATORY-GROUPS { hpicfPimBaseGroup,
hpicfPimDenseIfGroup }
::= { hpicfPimCompliances 2 }
hpicfPimNotificationCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The collection of notifications that extends
notifications defined in RFC 2934 - used for signalling
important PIM events."
MODULE -- this module
MANDATORY-GROUPS { hpicfPimNotificationGroup}
::= { hpicfPimCompliances 3 }
hpicfPimUcastRoutingCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers running
PIM and related Unicast routing info."
MODULE -- this module
MANDATORY-GROUPS { hpicfPimStaticRpfExtensionsGroup,
hpicfPimUcastRouteGroup }
::= { hpicfPimCompliances 4 }
hpicfPimMcastRoutingCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers running
PIM and related multicast forwarding info."
MODULE -- this module
MANDATORY-GROUPS { hpicfPimMRouteGroup }
::= { hpicfPimCompliances 5 }
hpicfPimInterfaceInfoCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers running
PIM and related interface and neighbor info."
MODULE -- this module
MANDATORY-GROUPS { hpicfPimNeighborGroup,
hpicfPimInterfaceExtensionsGroup }
::= { hpicfPimCompliances 6 }
hpicfPimProtoMessageCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers running
PIM and certain protocol packet info."
MODULE -- this module
MANDATORY-GROUPS { hpicfPimUnackGraftsGroup,
hpicfPimJoinPruneGroup }
::= { hpicfPimCompliances 7 }
hpicfPimGlobalCountersCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers running
PIM and related global statistics data."
MODULE -- this module
MANDATORY-GROUPS { hpicfPimGlobalCounterGroup }
::= { hpicfPimCompliances 8 }
hpicfPimRPSetExtensionsCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP routers running
PIM Sparse Mode and further RP set info."
MODULE -- this module
MANDATORY-GROUPS { hpicfPimRPSetGroup }
::= { hpicfPimCompliances 9 }
END