Observium_CE/mibs/fscom/FS-MPLS-L3VPN-BGP-MIB

403 lines
16 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- FS-MPLS-L3VPN-BGP-MIB.mib: FS Mpls L3vpn Bgp MIB file
--
-- November 2002, Wang Meng
--
-- Copyright (c) 2011 by FS.COM Inc..
-- All rights reserved.
--
-- *****************************************************************
--
FS-MPLS-L3VPN-BGP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- [RFC2580]
RowStatus, StorageType
FROM SNMPv2-TC -- [RFC2579]
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB -- [RFC4001]
mplsL3VpnVrfName
FROM MPLS-L3VPN-STD-MIB
bgp4PathAttrIpAddrPrefix,
bgp4PathAttrIpAddrPrefixLen,
bgp4PathAttrPeer
FROM BGP4-MIB
fsMgmt
FROM FS-SMI;
-- **********************************************************************
-- * MODULE IDENTITY
-- **********************************************************************
fsmplsL3VpnNbrMIB MODULE-IDENTITY
LAST-UPDATED "201109160000Z"
ORGANIZATION "FS.COM Inc.."
CONTACT-INFO
"Tel: 400-865-2852
E-mail: https://www.fs.com/live_chat_service_mail.html"
DESCRIPTION
"This MIB contains managed object definitions for the
neighbors' parameters of the
Layer-3 Multiprotocol Label Switching Virtual
Private Networks.
Copyright (C) The Internet Society (2006). This
version of this MIB module is part of RFC4382; see
the RFC itself for full legal notices."
-- Revision history.
REVISION
"201109160000Z"
DESCRIPTION
"Initial version. Published as RFC 4382."
::= { fsMgmt 100 }
-- **********************************************************************
-- * fsmplsL3VpnVrfBgpNbrTable table
-- **********************************************************************
fsmplsL3VpnVrfBgpNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSmplsL3VpnVrfBgpNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-interface MPLS L3VPN
VRF Table capability and associated information.
Entries in this table define VRF routing instances
associated with MPLS/VPN interfaces. Note that
multiple interfaces can belong to the same VRF
instance. The collection of all VRF instances
comprises an actual VPN."
::= { fsmplsL3VpnNbrMIB 1 }
fsmplsL3VpnVrfBgpNbrEntry OBJECT-TYPE
SYNTAX FSmplsL3VpnVrfBgpNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every VRF capable of supporting MPLS L3VPN. The
indexing provides an ordering of VRFs per-VPN
interface."
INDEX { mplsL3VpnVrfName,
fsmplsL3VpnVrfBgpNbrAddr}
::= { fsmplsL3VpnVrfBgpNbrTable 1 }
FSmplsL3VpnVrfBgpNbrEntry ::= SEQUENCE {
fsmplsL3VpnVrfBgpNbrRole INTEGER,
fsmplsL3VpnVrfBgpNbrType InetAddressType,
fsmplsL3VpnVrfBgpNbrAddr InetAddress,
fsmplsL3VpnVrfBgpNbrRowStatus RowStatus,
fsmplsL3VpnVrfBgpNbrStorageType StorageType,
fsmplsL3VpnVrfBgpNbrRemoteAS INTEGER
}
fsmplsL3VpnVrfBgpNbrRole OBJECT-TYPE
SYNTAX INTEGER { ce(1), pe(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shall specify the role of the bgp
neighbor in Layer-3 Multiprotocol Label Switching
Virtual Private Networks. "
::= { fsmplsL3VpnVrfBgpNbrEntry 1 }
fsmplsL3VpnVrfBgpNbrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shall specify the address family of the PE's address. "
::= { fsmplsL3VpnVrfBgpNbrEntry 2 }
fsmplsL3VpnVrfBgpNbrAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shall specify the address of the PE. "
::= { fsmplsL3VpnVrfBgpNbrEntry 3 }
fsmplsL3VpnVrfBgpNbrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is used to change or delete one row of this table. "
::= { fsmplsL3VpnVrfBgpNbrEntry 4 }
fsmplsL3VpnVrfBgpNbrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The storage type for this VPN bgp neighbor.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar
objects in the row."
REFERENCE
"See RFC4382."
DEFVAL { volatile }
::= { fsmplsL3VpnVrfBgpNbrEntry 5 }
fsmplsL3VpnVrfBgpNbrRemoteAS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote autonomous system number."
::= { fsmplsL3VpnVrfBgpNbrEntry 6 }
-- **********************************************************************
-- * End of fsmplsL3VpnVrfBgpNbrTable table
-- **********************************************************************
-- **********************************************************************
-- * fsmplsL3VpnVrfBgpNbrattr
-- **********************************************************************
fsmplsL3VpnVrfBgpPAtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSmplsL3VpnVrfBgpPAtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-interface MPLS L3VPN
VRF Table capability and associated information.
Entries in this table define VRF routing instances
associated with MPLS/VPN interfaces. Note that
multiple interfaces can belong to the same VRF
instance. The collection of all VRF instances
comprises an actual VPN."
::= { fsmplsL3VpnNbrMIB 2 }
fsmplsL3VpnVrfBgpPAtrEntry OBJECT-TYPE
SYNTAX FSmplsL3VpnVrfBgpPAtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every VRF capable of supporting MPLS L3VPN. The
indexing provides an ordering of VRFs per-VPN
interface."
INDEX { mplsL3VpnVrfName,
bgp4PathAttrIpAddrPrefix,
bgp4PathAttrIpAddrPrefixLen,
bgp4PathAttrPeer }
::= { fsmplsL3VpnVrfBgpPAtrTable 1 }
FSmplsL3VpnVrfBgpPAtrEntry ::= SEQUENCE {
fsmplsL3VpnVrfBgpPAtrPeerType InetAddressType,
fsmplsL3VpnVrfBgpPAtrIpAddrPfxType InetAddressType,
fsmplsL3VpnVrfBgpPAtrOrigin INTEGER,
fsmplsL3VpnVrfBgpPAtrASPathSegment OCTET STRING,
fsmplsL3VpnVrfBgpPAtrNextHopType InetAddressType,
fsmplsL3VpnVrfBgpPAtrNextHop InetAddress,
fsmplsL3VpnVrfBgpPAtrMultiExitDisc Integer32,
fsmplsL3VpnVrfBgpPAtrLocalPref Integer32,
fsmplsL3VpnVrfBgpPAtrAtomicAggregate INTEGER,
fsmplsL3VpnVrfBgpPAtrAggregatorAS Integer32,
fsmplsL3VpnVrfBgpPAtrAggrAddrType InetAddressType,
fsmplsL3VpnVrfBgpPAtrAggregatorAddr InetAddress,
fsmplsL3VpnVrfBgpPAtrCalcLocalPref Integer32,
fsmplsL3VpnVrfBgpPAtrBest INTEGER,
fsmplsL3VpnVrfBgpPAtrUnknown OCTET STRING
}
fsmplsL3VpnVrfBgpPAtrPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shall specify the address family of the peer's address. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 1 }
fsmplsL3VpnVrfBgpPAtrIpAddrPfxType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shall specify the address family of the address. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 2 }
fsmplsL3VpnVrfBgpPAtrOrigin OBJECT-TYPE
SYNTAX INTEGER { igp(1), egp(2), incomplete(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shall specify the origin of the path. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 3 }
fsmplsL3VpnVrfBgpPAtrNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shall specify the address of the border router. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 4 }
fsmplsL3VpnVrfBgpPAtrASPathSegment OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This sequence is discription by a trible group
<type, length, value>. The length of the type
member is one octet. Its possible values are as
follow:
AS_SET: unordered set of ASs a route in the
UPDATE message has traversed.
AS_SEQUENCE<43><45>ordered set of ASs a route in the
UPDATE message has traversed.
The length of the length member is alse one octet,
indicating the count of the as. The value member
includes one or more as number and every as number
is discriped by a pair of octets, caculated according
to the following formula:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255."
::= { fsmplsL3VpnVrfBgpPAtrEntry 5 }
fsmplsL3VpnVrfBgpPAtrNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shall specify the address family of the border router's
address. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 6 }
fsmplsL3VpnVrfBgpPAtrMultiExitDisc OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shall specify the med value of an advertised route.
When it is set to -1, it indicates that this attribute is not exsiting. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 7 }
fsmplsL3VpnVrfBgpPAtrLocalPref OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The originating BGP4 speaker's degree of preference for an advertised route
When it is setto -1, it indicates that this attribute is not exsiting. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 8 }
fsmplsL3VpnVrfBgpPAtrAtomicAggregate OBJECT-TYPE
SYNTAX INTEGER { lessSpecificRrouteNotSelected(1), lessSpecificRouteSelected(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The originating BGP4 speaker's aggrating attribute for an advertised route. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 9 }
fsmplsL3VpnVrfBgpPAtrAggregatorAS OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prev BGP4 speaker's as number, who excude the aggregation of the advertised
route. when it is set to 0, it indicates the attribute not exists."
::= { fsmplsL3VpnVrfBgpPAtrEntry 10 }
fsmplsL3VpnVrfBgpPAtrAggrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attribute shall specify the address family of the aggregated address for the
advertised route."
::= { fsmplsL3VpnVrfBgpPAtrEntry 11 }
fsmplsL3VpnVrfBgpPAtrAggregatorAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attribute shall specify the address of the prev BGP4 speaker's as number, who
excude the aggregation of the advertised route. When it is set to 0, it indicates
this attribute not exists. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 12 }
fsmplsL3VpnVrfBgpPAtrCalcLocalPref OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attribute shall specify the degree of preference calculated by the origin
BGP4 speaker for an advertised route. When it is set to -1, it indicates this
attribute not exists. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 13 }
fsmplsL3VpnVrfBgpPAtrBest OBJECT-TYPE
SYNTAX INTEGER { false(1), true(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attribute shall specify when the advertised route is the best route. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 14 }
fsmplsL3VpnVrfBgpPAtrUnknown OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attribute shall specify the unkown attribute of the advertised route.
When its length is 0, it indicates that it does not exists. And the
context beyond the max length will not be recorded. "
::= { fsmplsL3VpnVrfBgpPAtrEntry 15 }
-- **********************************************************************
-- * End of fsmplsL3VpnVrfBgpPAtrTable table
-- **********************************************************************
-- Conformance Information **********************************************
fsmplsL3VpnVrfBgpNbrCom OBJECT IDENTIFIER ::= { fsmplsL3VpnNbrMIB 3 }
fsmplsL3VpnVrfBgpCompliances OBJECT IDENTIFIER ::= { fsmplsL3VpnVrfBgpNbrCom 1 }
fsmplsL3VpnVrfBgpGroups OBJECT IDENTIFIER ::= { fsmplsL3VpnVrfBgpNbrCom 2 }
-- Compliance statements
fsmplsL3VpnVrfBgpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for mpls L3VPN BGP neighbors which
implement the MPLS-L3VPN-PRIVATE-MIB.
"
MODULE -- this module
MANDATORY-GROUPS { fsmplsL3VpnVrfBgpGroup }
::= { fsmplsL3VpnVrfBgpCompliances 1 }
-- Units of compliance
fsmplsL3VpnVrfBgpGroup OBJECT-GROUP
OBJECTS {
fsmplsL3VpnVrfBgpNbrRole,
fsmplsL3VpnVrfBgpNbrType,
fsmplsL3VpnVrfBgpNbrAddr,
fsmplsL3VpnVrfBgpNbrRowStatus,
fsmplsL3VpnVrfBgpNbrStorageType,
fsmplsL3VpnVrfBgpNbrRemoteAS,
fsmplsL3VpnVrfBgpPAtrPeerType,
fsmplsL3VpnVrfBgpPAtrIpAddrPfxType,
fsmplsL3VpnVrfBgpPAtrOrigin,
fsmplsL3VpnVrfBgpPAtrASPathSegment,
fsmplsL3VpnVrfBgpPAtrNextHopType,
fsmplsL3VpnVrfBgpPAtrNextHop,
fsmplsL3VpnVrfBgpPAtrMultiExitDisc,
fsmplsL3VpnVrfBgpPAtrLocalPref,
fsmplsL3VpnVrfBgpPAtrAtomicAggregate,
fsmplsL3VpnVrfBgpPAtrAggregatorAS,
fsmplsL3VpnVrfBgpPAtrAggrAddrType,
fsmplsL3VpnVrfBgpPAtrAggregatorAddr,
fsmplsL3VpnVrfBgpPAtrCalcLocalPref,
fsmplsL3VpnVrfBgpPAtrBest,
fsmplsL3VpnVrfBgpPAtrUnknown
}
STATUS current
DESCRIPTION "A collection of objects providing for configuration
of an mpls L3VPN BGP neighbor which implements the
fsmplsL3VpnNbrMIB. "
::= { fsmplsL3VpnVrfBgpGroups 1 }
END