983 lines
38 KiB
Plaintext
983 lines
38 KiB
Plaintext
-- ################################################################################
|
|
|
|
EXTREME-ERPS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE FROM SNMPv2-CONF
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
OBJECT-TYPE FROM SNMPv2-SMI
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
NOTIFICATION-TYPE FROM SNMPv2-SMI
|
|
Integer32 FROM SNMPv2-SMI
|
|
Counter32 FROM SNMPv2-SMI
|
|
InterfaceIndex FROM IF-MIB
|
|
InterfaceIndexOrZero FROM IF-MIB
|
|
DisplayString FROM SNMPv2-TC
|
|
RowStatus FROM SNMPv2-TC
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
TruthValue FROM SNMPv2-TC
|
|
VlanId FROM Q-BRIDGE-MIB -- [RFC4363]
|
|
extremeAgent FROM EXTREME-BASE-MIB;
|
|
|
|
extremeErps MODULE-IDENTITY
|
|
LAST-UPDATED "201801180000Z" -- January 18, 2018
|
|
ORGANIZATION "Extreme Networks, Inc."
|
|
CONTACT-INFO "www.extremenetworks.com"
|
|
DESCRIPTION "Ethernet Ring Protection Switching information. This
|
|
MIB provides a set of known, standard setting to get
|
|
the information on protected Vlan entries per ERPS doamin,
|
|
ERPS rign information, the configration information related
|
|
to the monitoring entries of the rign entry, ERPS ring stats,
|
|
ERPS global information, and ERPS notification."
|
|
|
|
REVISION "201801180000Z" -- January 18, 2018
|
|
DESCRIPTION "Changed extremeErpsGlobalMulticastTemporaryFloodingDuration from TruthValue to Counter32"
|
|
|
|
REVISION "201703270000Z" -- March 27, 2017
|
|
DESCRIPTION "Added extremeErpsRingCfmRowStatus definiation"
|
|
|
|
REVISION "201505150000Z" -- May 15, 2015
|
|
DESCRIPTION "The initial version of EXTREME-ERPS-MIB"
|
|
::= { extremeAgent 46 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
RingMonitorMechanismType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object represents the type of monitoring mechanism used to monitor
|
|
a Ring Entry. The value can be one of the following:
|
|
|
|
cfm(1) Using Connectivity Fault Management via OAM functions
|
|
and mechanisms for Ethernet based networks (ITU-T
|
|
Y.1731)
|
|
reserved(x) Reserved for other monitoring mechanisms for future use"
|
|
SYNTAX INTEGER { cfm(1) }
|
|
|
|
VlanType
|
|
::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Indicates the type of vlan, whether it is control or
|
|
protected vlan, that is being added to the
|
|
ERPS domain."
|
|
SYNTAX INTEGER { unassigned (0),
|
|
control (1),
|
|
protected (2)
|
|
}
|
|
-- -------------------------------------------------------------
|
|
-- Notifications
|
|
-- -------------------------------------------------------------
|
|
extremeErpsNotifications OBJECT IDENTIFIER ::= { extremeErps 0 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- extremeErpsProtectedVlanTable
|
|
-- -------------------------------------------------------------
|
|
extremeErpsProtectedVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ExtremeErpsProtectedVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the grouping of set of protected vlans.
|
|
By default a group with GroupId 64 will be created and all vlans
|
|
will get mapped to it."
|
|
::= { extremeErps 1 }
|
|
|
|
extremeErpsProtectedVlanEntry OBJECT-TYPE
|
|
SYNTAX ExtremeErpsProtectedVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains vlan id and group id related to ERPS domain."
|
|
INDEX { extremeErpsRingName, extremeErpsProtectedVlanName }
|
|
::= { extremeErpsProtectedVlanTable 1 }
|
|
|
|
ExtremeErpsProtectedVlanEntry::= SEQUENCE {
|
|
extremeErpsProtectedVlanName DisplayString,
|
|
extremeErpsProtectedVlanId VlanId,
|
|
extremeErpsProtectedVlanRowStatus RowStatus
|
|
}
|
|
|
|
extremeErpsProtectedVlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The member Protected VLAN's name."
|
|
::= { extremeErpsProtectedVlanEntry 1 }
|
|
|
|
extremeErpsProtectedVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Protected vlan id which is mapped to this group."
|
|
::= { extremeErpsProtectedVlanEntry 2 }
|
|
|
|
extremeErpsProtectedVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry as per standard RowStatus conventions."
|
|
::= { extremeErpsProtectedVlanEntry 3}
|
|
|
|
-- -------------------------------------------------------------
|
|
-- extremeErpsRingTable
|
|
-- -------------------------------------------------------------
|
|
extremeErpsRingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ExtremeErpsRingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The table for creating and configuring the ring entries. Each entry
|
|
has information about one ring in the switch."
|
|
::= { extremeErps 2 }
|
|
|
|
extremeErpsRingEntry OBJECT-TYPE
|
|
SYNTAX ExtremeErpsRingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ring table entry, each entry in this table contains the attributes
|
|
which define a ring."
|
|
INDEX { extremeErpsRingName }
|
|
::= { extremeErpsRingTable 1 }
|
|
|
|
ExtremeErpsRingEntry ::= SEQUENCE {
|
|
extremeErpsRingName DisplayString,
|
|
extremeErpsRingVlanId VlanId,
|
|
extremeErpsRingEast InterfaceIndex,
|
|
extremeErpsRingWest InterfaceIndexOrZero,
|
|
extremeErpsRingRplPort InterfaceIndexOrZero,
|
|
extremeErpsRingPortBlockingOnVcRecovery TruthValue,
|
|
extremeErpsRingNodeType INTEGER,
|
|
extremeErpsRingOperatingMode INTEGER,
|
|
extremeErpsRingMonitorMechanism RingMonitorMechanismType,
|
|
extremeErpsRingEastStatus INTEGER,
|
|
extremeErpsRingWestStatus INTEGER,
|
|
extremeErpsRingSemState INTEGER,
|
|
extremeErpsRingNodeStatus BITS,
|
|
extremeErpsRingRplNeighbourPort InterfaceIndexOrZero,
|
|
extremeErpsRingProtectionType INTEGER,
|
|
extremeRingCfmGroup1 DisplayString,
|
|
extremeRingCfmGroup2 DisplayString,
|
|
extremeErpsRingCfmRowStatus RowStatus
|
|
}
|
|
|
|
extremeErpsRingName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ERPS domain name."
|
|
::= { extremeErpsRingEntry 1 }
|
|
|
|
extremeErpsRingVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the dedicated VLAN Id used by a ring for its
|
|
R-APS messages communication.
|
|
|
|
It is recommended that the,
|
|
* R-APS VLANs should be used only for ring R-APS message
|
|
communication and should not be used for data switching and
|
|
management purposes.
|
|
|
|
It is recommended that R-APS VLAN is created first through the VLAN
|
|
configuration before making the ring entry active, in order to avoid
|
|
any loss of R-APS PDU Tx/Rx.
|
|
|
|
It is not recommended to use the same R-APS VLAN ID for more than
|
|
one ring."
|
|
::= { extremeErpsRingEntry 2 }
|
|
|
|
extremeErpsRingEast OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"First port of the two ring ports participating in the ring. Any
|
|
interface with valid interface ID can be configured as a ring port."
|
|
::= { extremeErpsRingEntry 3 }
|
|
|
|
extremeErpsRingWest OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Second port of the two ring ports participating in the ring. Any
|
|
interface with valid interface ID can be configured as a ring port.
|
|
On the interconnected node of a sub-ring, this port should be
|
|
configured as zero."
|
|
::= { extremeErpsRingEntry 4 }
|
|
|
|
extremeErpsRingRplPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the RPL port of the ring.
|
|
|
|
Valid values for this object are '0', 'IfIndex of extremeErpsRingEast' and
|
|
'IfIndex of extremeErpsRingWest'.
|
|
|
|
When a port is configured as a RPL port, that node becomes RPL
|
|
owner for that ring.
|
|
|
|
Value '0' indicates that none of the ring ports is a RPL port
|
|
and hence the node is not a RPL owner.
|
|
|
|
In an interconnected node of a sub-ring, the 'extremeErpsRingEast' alone
|
|
can be chosen as an RPL port when administrator decides to have the
|
|
interconnected node as the RPL Owner of the sub-ring.
|
|
|
|
Administrator has to ensure that, only one node in a ring is
|
|
configured as RPL owner."
|
|
DEFVAL { 0 }
|
|
::= { extremeErpsRingEntry 5 }
|
|
|
|
extremeErpsRingPortBlockingOnVcRecovery OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is applicable for the interconnected nodes of a sub-ring.
|
|
This configuration helps to avoid the possibility of temporary loops
|
|
getting formed in the sub-ring during the virtual channel recovery.
|
|
This object should be set to 'true' on only one of the interconnected
|
|
node of the sub-ring. (If 'extremeErpsRingPortBlockingOnVcRecovery' is
|
|
configured to be 'true' on both the interconnected node of a sub-ring,
|
|
then that sub-ring will be temporary cutoff from the rest of network).
|
|
When this object value is set to 'true', the fsErpsRingEast of this
|
|
ring node will be blocked in the event of virtual channel recovery.
|
|
The extremeErpsRingEast of the sub-ring will be unblocked when the RPL port
|
|
of the sub-ring is blocked and NRRB messages from the RPL Owner is
|
|
received by this node."
|
|
DEFVAL { false }
|
|
::= { extremeErpsRingEntry 6 }
|
|
|
|
extremeErpsRingNodeType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rplOwner(1),
|
|
nonRplOwner(2),
|
|
interConnectionNode(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the node state of this ring node.
|
|
If extremeErpsRingRplPort is configured for a ring node, then that ring
|
|
node becomes 'rplOwner', otherwise the node remains as 'nonRplOwner'."
|
|
::= { extremeErpsRingEntry 7 }
|
|
|
|
extremeErpsRingOperatingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
revertive(1),
|
|
nonRevertive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies whether the ring is operating in revertive or
|
|
nonRevertive manner.
|
|
In revertive mode of operation, once the failed link recovers, the data
|
|
path will be switched back from protection path to working path.
|
|
|
|
In nonRevertive mode of operation, once the failed link recovers, one
|
|
of the recovered link port will remain in blocked state and the data
|
|
still remains in the protection path.
|
|
|
|
This object can be changed, only when the rowstatus for this ring is
|
|
not active."
|
|
DEFVAL { revertive }
|
|
::= { extremeErpsRingEntry 8 }
|
|
|
|
extremeErpsRingMonitorMechanism OBJECT-TYPE
|
|
SYNTAX RingMonitorMechanismType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of monitoring mechanism used for
|
|
detecting faults of the ring link.
|
|
|
|
Currently 'cfm' is supported as monitoring mechanism. For 'cfm'
|
|
monitoring mechanism to monitor the ring ports, appropriate down
|
|
MEPs on the R-APS VLAN of the ring has to be provisioned through
|
|
extremeErpsRingCfmTable.
|
|
For sub-rings, a Up & Down MEP on the sub-ring R-APS VLAN needs to
|
|
be installed on fsErpsRingEast of the interconnecting nodes using
|
|
the same extremeErpsRingCfmTable."
|
|
::= { extremeErpsRingEntry 9 }
|
|
|
|
extremeErpsRingEastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blocked(1),
|
|
unblocked(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates ring port1's current status updated by
|
|
ERPS control process of this ring.
|
|
If the status is blocked then:
|
|
- Data traffic will be blocked on this port.
|
|
- R-APS messages received on this port will be given to ERPS
|
|
control process but will not be forwarded.
|
|
- Similarly R-APS messages received at other member ports of
|
|
R-APS VLAN will not be forwarded on this port.
|
|
- Locally regenerated R-APS packets will be transmitted out of
|
|
this port.
|
|
If the status is unblocked then:
|
|
- Data traffic will be unblocked on this port.
|
|
- R-APS messages received on this port will be given to ERPS
|
|
control process and will be forwarded to R-APS VLAN member ports.
|
|
- Similarly R-APS messages received at other member ports of R-APS
|
|
VLAN can be forwarded on this port."
|
|
::= { extremeErpsRingEntry 10 }
|
|
|
|
extremeErpsRingWestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
blocked(1),
|
|
unblocked(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates ring port2's current status updated by
|
|
ERPS control process of this ring.
|
|
If the status is blocked then:
|
|
- Data traffic will be blocked on this port.
|
|
- R-APS messages received on this port will be given to ERPS
|
|
control process but will not be forwarded.
|
|
- Similarly R-APS messages received at other member ports of
|
|
R-APS VLAN will not be forwarded on this port.
|
|
- Locally regenerated R-APS packets will be transmitted out of
|
|
this port.
|
|
If the status is unblocked then:
|
|
- Data traffic will be unblocked on this port.
|
|
- R-APS messages received on this port will be given to ERPS
|
|
control process and will be forwarded to R-APS VLAN member ports.
|
|
- Similarly R-APS messages received at other member ports of R-APS
|
|
VLAN can be forwarded on this port.
|
|
For sub-rings in interconnected nodes, this object is not valid,
|
|
and get on this object will always return 'unblocked'."
|
|
::= { extremeErpsRingEntry 11 }
|
|
|
|
extremeErpsRingSemState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
idle(1),
|
|
protection(2),
|
|
manualswitch(3),
|
|
forcedswitch(4),
|
|
pending(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the node state as per the G.8032 state event
|
|
machine. When ring Row status is not active or when ERPS is disabled
|
|
in the virtual context, this object will show 'disabled(0)' status."
|
|
::= { extremeErpsRingEntry 12 }
|
|
|
|
extremeErpsRingNodeStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
signalFailOnEast(0),
|
|
signalFailOnWest(1),
|
|
remoteSignalFailOnEast(2),
|
|
remoteSignalFailOnWest(3),
|
|
rplBlocked(4),
|
|
waitToRestoreTimerRunning(5),
|
|
holdTimerRunning(6),
|
|
guardTimerRunning(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" General attributes giving the current status of the ring by specifying the
|
|
events/status currently present.
|
|
|
|
signalFailOnEast(0) - Signal-failure on Ring Port 1
|
|
signalFailOnWest(1) - Signal-failure on Ring Port 2
|
|
remoteSignalFailOnEast(2) - Remote-signal-failure received on Ring Port 1
|
|
remoteSignalFailOnWest(3) - Remote-signal-failure received on Ring Port 2
|
|
rplBlocked(4) - Rpl-blocked
|
|
waitToRestoreTimerRunning(5) - Wait-to-restore-timer-running
|
|
holdTimerRunning(6) - Hold-timer-running
|
|
guardTimerRunning(7) - Guard-timer-running
|
|
|
|
Value 1 of the bit signifies the presence of the event associated with
|
|
that bit and value zero signifies the absence of that event
|
|
For example: If a signal failure is received on Ring port 1 and R-APS(SF)
|
|
is received on port 2, then Bit 1 and 4 will have the value as 1.
|
|
|
|
Signal failure on a port represents Port failure indication received from
|
|
the monitoring entity. This does not depend on hold off timer status.
|
|
If signal failure is received on ring port 1 and hold-off timer is
|
|
started, then both signalFailOnEast and holdTimerRunning will have the value as 1."
|
|
::= { extremeErpsRingEntry 13 }
|
|
|
|
extremeErpsRingRplNeighbourPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the RPL Neighbour port of the ring .
|
|
|
|
Valid values for this object are '0', 'IfIndex of extremeErpsRingEast' and
|
|
'IfIndex of extremeErpsRingWest'.
|
|
|
|
When a port is configured as a RPL Neighbour port, that node becomes RPL
|
|
Neighbour for that ring. [Reference : Section 10.1 of ITU-T G.8032 Y.1344 (03/2010)]
|
|
|
|
Value '0' indicates that none of the ring ports is a RPL Neighbour port
|
|
and hence the node is not a RPL Neighbour.
|
|
|
|
In an interconnected node of a sub-ring, the 'extremeErpsRingEast' alone
|
|
can be chosen as an RPL Neighbour port when administrator decides to have the
|
|
interconnected node as the RPL Neighbour of the sub-ring.
|
|
|
|
Both the RPL owner and RPL Neighbor node cannot be enabled at the same
|
|
Ethernet Ring Node.
|
|
|
|
Administrator has to ensure that, only one node in a ring is
|
|
configured as RPL Neighbour ,and the node is adjacent to the RPL ."
|
|
DEFVAL { 0 }
|
|
::= { extremeErpsRingEntry 14 }
|
|
|
|
extremeErpsRingProtectionType OBJECT-TYPE
|
|
SYNTAX INTEGER { portBased(1), serviceBased(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of protection being provided by this
|
|
ring instance. The following two protection switching types are
|
|
possible:
|
|
portBased - Port Based Protection
|
|
This ring applies the protection switching mechanism
|
|
for all traffic that pass through its ring ports.
|
|
Hence when ERP control process decides to block or
|
|
unblock a ring port, all data traffic that passes
|
|
through that port gets affected.
|
|
serviceBased - Service Based Protection.
|
|
This ring applies the protection switching mechanism
|
|
only for the set of vlans mapped to this ring instance.
|
|
Hence when ERP control process decides to block or
|
|
unblock a ring port, only the data traffic of the vlans
|
|
that are mapped to this ring instance and that passes
|
|
through that port gets affected.
|
|
|
|
All ring nodes in a single ring instance must be configured with the
|
|
same protection type.
|
|
|
|
In a single virtual context one ring can run in port based protection
|
|
mode and another ring can run in service based protection mode.
|
|
|
|
It is not recommended to configure a port as ring port in a port based
|
|
ring instance as well as in a service based ring instance.
|
|
|
|
It is not recommended to configure a port as ring port in multiple port
|
|
based ring instance.
|
|
|
|
The ring protection type can be modified only when the row status of
|
|
the ring entry in not in service."
|
|
DEFVAL { portBased }
|
|
::= { extremeErpsRingEntry 15 }
|
|
|
|
extremeRingCfmGroup1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Connectivity Fault Management group 1"
|
|
::= { extremeErpsRingEntry 16 }
|
|
|
|
extremeRingCfmGroup2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Connectivity Fault Management group 2 "
|
|
::= { extremeErpsRingEntry 17 }
|
|
|
|
extremeErpsRingCfmRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry as per standard RowStatus conventions."
|
|
::= { extremeErpsRingEntry 18}
|
|
|
|
-- -------------------------------------------------------------
|
|
-- extremeErpsStatsTable
|
|
-- -------------------------------------------------------------
|
|
extremeErpsRingStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ExtremeErpsRingStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains statistics information for each of the ring
|
|
present in the system. Entries in this table are created
|
|
implicitly by the creation of entries in the extreneErpsRingTable."
|
|
::={ extremeErps 4 }
|
|
|
|
extremeErpsRingStatsEntry OBJECT-TYPE
|
|
SYNTAX ExtremeErpsRingStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is one entry in this table for each entry in the extremeErpsRingTable.
|
|
Each entry contains the statistics for both ring ports. For a sub-ring
|
|
in an interconnected node, Port 2 statistics represent the statistics
|
|
of the UP MEP installed on extremeErpsRingEast."
|
|
INDEX { extremeErpsRingName }
|
|
::= { extremeErpsRingStatsTable 1 }
|
|
|
|
ExtremeErpsRingStatsEntry ::= SEQUENCE {
|
|
extremeErpsRingEastRapsPduSentCount Counter32,
|
|
extremeErpsRingWestRapsPduSentCount Counter32,
|
|
extremeErpsRingEastRapsPduRcvdCount Counter32,
|
|
extremeErpsRingWestRapsPduRcvdCount Counter32,
|
|
extremeErpsRingEastRapsPduDiscardCount Counter32,
|
|
extremeErpsRingWestRapsPduDiscardCount Counter32,
|
|
extremeErpsRingEastBlockedCount Counter32,
|
|
extremeErpsRingWestBlockedCount Counter32,
|
|
extremeErpsRingEastUnblockedCount Counter32,
|
|
extremeErpsRingWestUnblockedCount Counter32,
|
|
extremeErpsRingEastFailedCount Counter32,
|
|
extremeErpsRingWestFailedCount Counter32,
|
|
extremeErpsRingEastRecoveredCount Counter32,
|
|
extremeErpsRingWestRecoveredCount Counter32
|
|
}
|
|
|
|
extremeErpsRingEastRapsPduSentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of valid R-APS PDUs sent on the
|
|
extremeErpsRingEast of the ring. R-APS PDUs include all types like R-APS(SF),
|
|
R-APS(NR) & R-APS (NR, RB)."
|
|
::= { extremeErpsRingStatsEntry 1 }
|
|
|
|
extremeErpsRingWestRapsPduSentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of valid R-APS PDUs sent on the
|
|
extremeErpsRingWest of the ring. R-APS PDUs include all types like
|
|
R-APS(SF), R-APS(NR) & R-APS (NR, RB)."
|
|
::= { extremeErpsRingStatsEntry 2 }
|
|
|
|
extremeErpsRingEastRapsPduRcvdCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of valid R-APS PDUs received on the
|
|
extremeErpsRingEast of the ring. R-APS PDUs include all types like
|
|
R-APS(SF), R-APS(NR) & R-APS (NR, RB)."
|
|
::= { extremeErpsRingStatsEntry 3 }
|
|
|
|
extremeErpsRingWestRapsPduRcvdCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of valid R-APS PDUs received on the
|
|
extremeErpsRingWest of the ring. R-APS PDUs include all types like R-APS(SF),
|
|
R-APS(NR) & R-APS (NR, RB)."
|
|
::= { extremeErpsRingStatsEntry 4 }
|
|
|
|
extremeErpsRingEastRapsPduDiscardCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of R-APS PDUs discarded on the
|
|
extremeErpsRingEast of the ring. R-APS PDUs include all types like R-APS(SF),
|
|
R-APS(NR) & R-APS (NR, RB). R-APS PDUs with invalid RAPS header
|
|
information(wrong request/state) will be discarded."
|
|
::= { extremeErpsRingStatsEntry 5 }
|
|
|
|
extremeErpsRingWestRapsPduDiscardCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of R-APS PDUs discarded on the
|
|
extremeErpsRingWest of the ring. R-APS PDUs include all types like R-APS(SF),
|
|
R-APS(NR) & R-APS (NR, RB). R-APS PDUs with invalid RAPS header
|
|
information(wrong request/state) will be discarded."
|
|
::= { extremeErpsRingStatsEntry 6 }
|
|
|
|
extremeErpsRingEastBlockedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number times the extremeErpsRingEast is blocked.
|
|
A port might be blocked because of local failure, or because of link
|
|
configured as RPL, or if Force/Manual switch is configured"
|
|
::= { extremeErpsRingStatsEntry 7 }
|
|
|
|
extremeErpsRingWestBlockedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number times the extremeErpsRingWest is blocked.
|
|
A port might be blocked because of local failure, or because of link
|
|
configured as RPL, or if Force/Manual switch is configured"
|
|
::= { extremeErpsRingStatsEntry 8 }
|
|
|
|
extremeErpsRingEastUnblockedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number times the extremeErpsRingEast is unblocked.
|
|
A port might be unblocked because of recovery from local failure, or
|
|
if the link is configured as RPL link and there is any other failure
|
|
in the network, or if Force/Manual switch configuration is removed."
|
|
::= { extremeErpsRingStatsEntry 9 }
|
|
|
|
extremeErpsRingWestUnblockedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number times the extremeErpsRingWest is unblocked.
|
|
A port might be unblocked because of recovery from local failure, or
|
|
if the link is configured as RPL link and there is any other failure
|
|
in the network, or if Force/Manual switch configuration is removed."
|
|
::= { extremeErpsRingStatsEntry 10 }
|
|
|
|
extremeErpsRingEastFailedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the extremeErpsRingEast failed
|
|
because of local SF condition."
|
|
::= { extremeErpsRingStatsEntry 11 }
|
|
|
|
extremeErpsRingWestFailedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the extremeErpsRingWest failed
|
|
because of local SF condition."
|
|
::= { extremeErpsRingStatsEntry 12 }
|
|
|
|
extremeErpsRingEastRecoveredCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the extremeErpsRingEast recovered
|
|
from a failure (local clear SF condition)."
|
|
::= { extremeErpsRingStatsEntry 13 }
|
|
|
|
extremeErpsRingWestRecoveredCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the extremeErpsRingWest recovered
|
|
from a failure (local clear SF condition)."
|
|
::= { extremeErpsRingStatsEntry 14 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- extremeErpsGlobalInfo
|
|
-- ------------------------------------------------------------
|
|
extremeErpsGlobalInfo OBJECT IDENTIFIER
|
|
::= { extremeErps 5 }
|
|
|
|
extremeErpsGlobalEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if ERPS is enabled globally on the switch."
|
|
::= { extremeErpsGlobalInfo 1 }
|
|
|
|
extremeErpsGlobalDisplayConfigWarnings OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if Display Config Warnings is enabled globally on the
|
|
switch."
|
|
::= { extremeErpsGlobalInfo 2 }
|
|
|
|
extremeErpsGlobalMulticastAddRingPorts OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if Multicast Add Ring Ports is enabled globally on the
|
|
switch."
|
|
::= { extremeErpsGlobalInfo 3 }
|
|
|
|
extremeErpsGlobalMulticastSendIGMPAndMLDQuery OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if Multicast Send IGMP and MLD Query is enabled globally on the
|
|
switch."
|
|
::= { extremeErpsGlobalInfo 4 }
|
|
|
|
extremeErpsGlobalMulticastTemporaryFlooding OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if Multicast Temporary Flooding is enabled globally on the
|
|
switch."
|
|
::= { extremeErpsGlobalInfo 5 }
|
|
|
|
extremeErpsGlobalMulticastTemporaryFloodingDuration OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the duration of Multicast Temporary Flooding on the
|
|
switch."
|
|
::= { extremeErpsGlobalInfo 6 }
|
|
|
|
extremeErpsGlobalNumberOfERPSInstances OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Number of ERPS instances is configured globally on the switch."
|
|
::= { extremeErpsGlobalInfo 7 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- extremeErpsNotification
|
|
-- ------------------------------------------------------------
|
|
extremeErpsTraps OBJECT IDENTIFIER ::= { extremeErpsNotifications 0 }
|
|
|
|
extremeErpsTypeOfFailure OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides the text indicating a particular failure
|
|
condition.
|
|
|
|
'R-APSPduTxFailure' will be set, when the state machine is unable to
|
|
transmit an R-APS PDU.
|
|
|
|
'HwProgramFailure' will be set, when hardware programming for the ring
|
|
fails.
|
|
|
|
'BufferAllocFailure' will be set, when there is memory allocation
|
|
failure issues.
|
|
|
|
'TimerFailure' will be set, when there is any failure in the
|
|
timer start."
|
|
::= { extremeErpsNotifications 1 }
|
|
|
|
extremeErpsStateChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
extremeErpsRingName,
|
|
extremeErpsRingSemState,
|
|
extremeErpsRingNodeStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated on the following events:
|
|
- Local SF is received for the ring.
|
|
- Local Clear SF is received for the ring.
|
|
- Remote failure is detected on this ring.
|
|
- Remote failure is cleared on this ring.
|
|
- Force Switch is issued for a ring (ForcedSwitch).
|
|
- Manual Switch is issued for a ring (ManualSwitch)."
|
|
::= { extremeErpsTraps 1 }
|
|
|
|
extremeErpsFailureTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
extremeErpsRingName,
|
|
extremeErpsTypeOfFailure
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated when there is any failure on a ring."
|
|
::= { extremeErpsTraps 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Conformance Information
|
|
-- -------------------------------------------------------------
|
|
extremeErpsMIBConformance OBJECT IDENTIFIER ::= { extremeErps 6 }
|
|
extremeErpsMIBCompliances OBJECT IDENTIFIER ::= { extremeErpsMIBConformance 1 }
|
|
extremeErpsMIBGroups OBJECT IDENTIFIER ::= { extremeErpsMIBConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance Statements
|
|
-- -------------------------------------------------------------
|
|
extremeErpsMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The core compliance statement for all ERPS implementations."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
extremeErpsProtectedVlanEntryGroup,
|
|
extremeErpsRingGroup,
|
|
extremeErpsRingCfmGroup,
|
|
extremeErpsRingStatsGroup,
|
|
extremeErpsGlobalInfoGroup
|
|
}
|
|
::= { extremeErpsMIBCompliances 1 }
|
|
|
|
extremeErpsMIBCompliance2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The core compliance statement for all ERPS implementations."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
extremeErpsProtectedVlanEntryGroup2,
|
|
extremeErpsRingGroup2,
|
|
extremeErpsRingCfmGroup,
|
|
extremeErpsRingStatsGroup,
|
|
extremeErpsGlobalInfoGroup
|
|
}
|
|
::= { extremeErpsMIBCompliances 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Conformance Groups
|
|
-- -------------------------------------------------------------
|
|
extremeErpsProtectedVlanEntryGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
extremeErpsProtectedVlanId,
|
|
extremeErpsProtectedVlanRowStatus
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Conformance group for ERPS Protected Vlan Entry."
|
|
::= { extremeErpsMIBGroups 1 }
|
|
|
|
extremeErpsRingGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
extremeErpsRingVlanId,
|
|
extremeErpsRingEast,
|
|
extremeErpsRingWest,
|
|
extremeErpsRingRplPort,
|
|
extremeErpsRingPortBlockingOnVcRecovery,
|
|
extremeErpsRingNodeType,
|
|
extremeErpsRingOperatingMode,
|
|
extremeErpsRingMonitorMechanism,
|
|
extremeErpsRingEastStatus,
|
|
extremeErpsRingWestStatus,
|
|
extremeErpsRingSemState,
|
|
extremeErpsRingNodeStatus,
|
|
extremeErpsRingRplNeighbourPort,
|
|
extremeErpsRingProtectionType
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Conformance group for ERPS Ring Entry."
|
|
::= { extremeErpsMIBGroups 2 }
|
|
|
|
extremeErpsRingCfmGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
extremeRingCfmGroup1,
|
|
extremeRingCfmGroup2,
|
|
extremeErpsRingCfmRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for ERPS Ring Cfm Entry."
|
|
::= { extremeErpsMIBGroups 3 }
|
|
|
|
extremeErpsRingStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
extremeErpsRingEastRapsPduSentCount,
|
|
extremeErpsRingWestRapsPduSentCount,
|
|
extremeErpsRingEastRapsPduRcvdCount,
|
|
extremeErpsRingWestRapsPduRcvdCount,
|
|
extremeErpsRingEastRapsPduDiscardCount,
|
|
extremeErpsRingWestRapsPduDiscardCount,
|
|
extremeErpsRingEastBlockedCount,
|
|
extremeErpsRingWestBlockedCount,
|
|
extremeErpsRingEastUnblockedCount,
|
|
extremeErpsRingWestUnblockedCount,
|
|
extremeErpsRingEastFailedCount,
|
|
extremeErpsRingWestFailedCount,
|
|
extremeErpsRingEastRecoveredCount,
|
|
extremeErpsRingWestRecoveredCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for ERPS Ring Stats Entry."
|
|
::= { extremeErpsMIBGroups 4 }
|
|
|
|
extremeErpsGlobalInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
extremeErpsGlobalEnabled,
|
|
extremeErpsGlobalDisplayConfigWarnings,
|
|
extremeErpsGlobalMulticastAddRingPorts,
|
|
extremeErpsGlobalMulticastSendIGMPAndMLDQuery,
|
|
extremeErpsGlobalMulticastTemporaryFlooding,
|
|
extremeErpsGlobalMulticastTemporaryFloodingDuration,
|
|
extremeErpsGlobalNumberOfERPSInstances,
|
|
extremeErpsTypeOfFailure
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for ERPS global information."
|
|
::= { extremeErpsMIBGroups 5 }
|
|
|
|
extremeErpsNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
extremeErpsStateChangeTrap,
|
|
extremeErpsFailureTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for ERPS notification."
|
|
::= { extremeErpsMIBGroups 6 }
|
|
|
|
extremeErpsProtectedVlanEntryGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
extremeErpsProtectedVlanName,
|
|
extremeErpsProtectedVlanId,
|
|
extremeErpsProtectedVlanRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for ERPS Protected Vlan Entry."
|
|
::= { extremeErpsMIBGroups 7 }
|
|
|
|
extremeErpsRingGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
extremeErpsRingName,
|
|
extremeErpsRingVlanId,
|
|
extremeErpsRingEast,
|
|
extremeErpsRingWest,
|
|
extremeErpsRingRplPort,
|
|
extremeErpsRingPortBlockingOnVcRecovery,
|
|
extremeErpsRingNodeType,
|
|
extremeErpsRingOperatingMode,
|
|
extremeErpsRingMonitorMechanism,
|
|
extremeErpsRingEastStatus,
|
|
extremeErpsRingWestStatus,
|
|
extremeErpsRingSemState,
|
|
extremeErpsRingNodeStatus,
|
|
extremeErpsRingRplNeighbourPort,
|
|
extremeErpsRingProtectionType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for ERPS Ring Entry."
|
|
::= { extremeErpsMIBGroups 8 }
|
|
END
|