WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/d-link/DLINK-DXS-1210-12SC-AX-MIB

25055 lines
899 KiB
Plaintext
Raw Blame History

--------------------------------------------------------------------------------
-- --------------------------------- Revision ----------------------------------
-- Date Version Author Chanage Description
-- 2013/07/12 1.00.000 D-Link Initial version
--
-- 2014/09/10 1.00.008 D-Link Finish basic features
--
-- 2014/09/26 1.00.009 D-Link update mib follow spec
--
-- 2014/12/31 1.00.012 D-Link Release R1.1 final mib
--
--------------------------------------------------------------------------------
-- mib version: DXS-1210-12SC-AX-V1.10.013
DLINK-DXS-1210-12SC-AX-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
enterprises, IpAddress, Integer32, Unsigned32, TimeTicks, Counter32,Counter64,
Gauge32
FROM SNMPv2-SMI
InetAddress ,InetAddressType FROM INET-ADDRESS-MIB
InterfaceIndex,InterfaceIndexOrZero
FROM IF-MIB
SnmpAdminString,SnmpEngineID,SnmpSecurityLevel FROM SNMP-FRAMEWORK-MIB
dot1dBridge, dot1dBasePortEntry, dot1dBasePort FROM BRIDGE-MIB
RowStatus, TruthValue, DisplayString,
TEXTUAL-CONVENTION, MacAddress,TimeStamp,DateAndTime,TimeInterval FROM SNMPv2-TC
VlanId FROM Q-BRIDGE-MIB
AddressFamilyNumbers FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
Dscp FROM DIFFSERV-DSCP-TC;
d-link MODULE-IDENTITY
LAST-UPDATED "201507010000Z"
ORGANIZATION "D-Link"
CONTACT-INFO "support@dlink.com"
DESCRIPTION "The MIB module for management of D-Link series products."
REVISION "201507010000Z"
DESCRIPTION "The MIB module for management of D-Link series products."
::= { enterprises 171}
-- d-link OBJECT IDENTIFIER ::= { enterprises 171 }
dlink-products OBJECT IDENTIFIER ::= { d-link 10 }
dlink-DXS1210SeriesProd OBJECT IDENTIFIER ::= { dlink-products 139}
dxs-1210-12sc OBJECT IDENTIFIER ::= { dlink-DXS1210SeriesProd 3 }
dxs-1210-12sc-AX OBJECT IDENTIFIER ::= { dxs-1210-12sc 1 }
VlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables: values of 0 and
4095 are not permitted; if the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent, i.e. one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q but it is convenient to be able to manage them
in the same way using this MIB."
SYNTAX Unsigned32
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
VlanList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlans 1 through
8, the second octet specifying vlans 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered of vlan, and the least significant bit
represents the highest numbered of vlan. Thus, each vlan
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that vlan is included in the set of vlans; the vlan
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
BridgeId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Bridge-Identifier as used in the
Spanning Tree
Protocol to uniquely identify a bridge. Its first two
octets (in network byte order) contain a priority
value and its last 6 octets contain the MAC address
used to refer to a bridge in a unique fashion
(typically, the numerically smallest MAC address
of all ports on the bridge).
Several objects in this MIB module represent values of
timers used by the Spanning Tree Protocol. In this
MIB, these timers have values in units of hundreths of
a second (i.e. 1/100 secs).
These timers, when stored in a Spanning Tree Protocol's
BPDU, are in units of 1/256 seconds. Note, however,
that 802.1D-1990 specifies a settable granularity of
no more than 1 second for these timers. To avoid
ambiguity, a data type is defined here as a textual
convention and all representation of these timers
in this MIB module are defined using this data type. An
algorithm is also defined for converting between the
different units, to ensure a timer's value is not
distorted by multiple conversions."
SYNTAX OCTET STRING (SIZE (8))
Timeout ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d4"
STATUS current
DESCRIPTION
"A STP timer in units of 1/100 seconds
To convert a Timeout value into a value in units of
1/256 seconds, the following algorithm should be used:
b = floor( (n * 256) / 100)
where:
floor = quotient [ignore remainder]
n is the value in 1/100 second units
b is the value in 1/256 second units
To convert the value from 1/256 second units back to
1/100 seconds, the following algorithm should be used:
n = ceiling( (b * 100) / 256)
where:
ceiling = quotient [if remainder is 0], or
quotient + 1 [if remainder is non-zero]
n is the value in 1/100 second units
b is the value in 1/256 second units
Note: it is important that the arithmetic operations are
done in the order specified (i.e., multiply first, divide
second)."
SYNTAX INTEGER
RmonStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of a table entry.
Setting this object to the value invalid(4) has the
effect of invalidating the corresponding entry.
That is, it effectively disassociates the mapping
identified with said entry.
It is an implementation-specific matter as to whether
the agent removes an invalidated entry from the table.
Accordingly, management stations must be prepared to
receive tabular information from agents that corresponds
to entries currently not in use. Proper
interpretation of such entries requires examination
of the relevant RmonStatus object.
An existing instance of this object cannot be set to
createRequest(2). This object may only be set to
createRequest(2) when this instance is created. When
this object is created, the agent may wish to create
supplemental object instances with default values
to complete a conceptual row in this table. Because the
creation of these default objects is entirely at the option
of the agent, the manager must not assume that any will be
created, but may make use of any that are created.
Immediately after completing the create operation, the agent
must set this object to underCreation(3).
When in the underCreation(3) state, an entry is allowed to
exist in a possibly incomplete, possibly inconsistent state,
usually to allow it to be modified in multiple PDUs. When in
this state, an entry is not fully active.
Entries shall exist in the underCreation(3) state until
the management station is finished configuring the entry
and sets this object to valid(1) or aborts, setting this
object to invalid(4). If the agent determines that an
entry has been in the underCreation(3) state for an
abnormally long time, it may decide that the management
station has crashed. If the agent makes this decision,
it may set this object to invalid(4) to reclaim the
entry. A prudent agent will understand that the
management station may need to wait for human input
and will allow for that possibility in its
determination of this abnormally long period.
An entry in the valid(1) state is fully configured and
consistent and fully represents the configuration or
operation such a row is intended to represent. For
example, it could be a statistical function that is
configured and active, or a filter that is available
in the list of filters processed by the packet capture
process.
A manager is restricted to changing the state of an entry in
the following ways:
To: valid createRequest underCreation invalid
From:
valid OK NO OK OK
createRequest N/A N/A N/A N/A
underCreation OK NO OK OK
invalid NO NO NO OK
nonExistent NO OK NO OK
In the table above, it is not applicable to move the state
from the createRequest state to any other state because the
manager will never find the variable in that state. The
nonExistent state is not a value of the enumeration, rather
it means that the entryStatus variable does not exist at all.
An agent may allow an entryStatus variable to change state in
additional ways, so long as the semantics of the states are
followed. This allowance is made to ease the implementation of
the agent and is made despite the fact that managers should
never exercise these additional state transitions."
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
OperationResponseStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to report the result of an operation:
responseReceived(1) - Operation is completed successfully.
unknown(2) - Operation failed due to unknown error.
internalError(3) - An implementation detected an error
in its own processing that caused an operation
to fail.
requestTimedOut(4) - Operation failed to receive a
valid reply within the time limit imposed on it.
unknownDestinationAddress(5) - Invalid destination
address.
noRouteToTarget(6) - Could not find a route to target.
interfaceInactiveToTarget(7) - The interface to be
used in sending a probe is inactive, and an
alternate route does not exist.
arpFailure(8) - Unable to resolve a target address to a
media-specific address.
maxConcurrentLimitReached(9) - The maximum number of
concurrent active operations would have been exceeded
if the corresponding operation was allowed.
unableToResolveDnsName(10) - The DNS name specified was
unable to be mapped to an IP address.
invalidHostAddress(11) - The IP address for a host
has been determined to be invalid. Examples of this
are broadcast or multicast addresses."
SYNTAX INTEGER {
responseReceived(1),
unknown(2),
internalError(3),
requestTimedOut(4),
unknownDestinationAddress(5),
noRouteToTarget(6),
interfaceInactiveToTarget(7),
arpFailure(8),
maxConcurrentLimitReached(9),
unableToResolveDnsName(10),
invalidHostAddress(11)
}
LldpChassisIdSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the source of a chassis identifier.
The enumeration 'chassisComponent(1)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 2737) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').
The enumeration 'interfaceAlias(2)' represents a chassis
identifier based on the value of ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
The enumeration 'portComponent(3)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 2737) for a port or backplane
component (i.e., entPhysicalClass value of 'port(10)' or
'backplane(4)'), within the containing chassis.
The enumeration 'macAddress(4)' represents a chassis
identifier based on the value of a unicast source address
(encoded in network byte order and IEEE 802.3 canonical bit
order), of a port on the containing chassis as defined in
IEEE Std 802-2001.
The enumeration 'networkAddress(5)' represents a chassis
identifier based on a network address, associated with
a particular chassis. The encoded address is actually
composed of two fields. The first field is a single octet,
representing the IANA AddressFamilyNumbers value for the
specific address type, and the second field is the network
address value.
The enumeration 'interfaceName(6)' represents a chassis
identifier based on the value of ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
The enumeration 'local(7)' represents a chassis identifier
based on a locally defined value."
SYNTAX INTEGER {
chassisComponent(1),
interfaceAlias(2),
portComponent(3),
macAddress(4),
networkAddress(5),
interfaceName(6),
local(7)
}
LldpChassisId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the format of a chassis identifier string.
Objects of this type are always used with an associated
LldpChassisIdSubtype object, which identifies the format of
the particular LldpChassisId object instance.
If the associated LldpChassisIdSubtype object has a value of
'chassisComponent(1)', then the octet string identifies
a particular instance of the entPhysicalAlias object
(defined in IETF RFC 2737) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').
If the associated LldpChassisIdSubtype object has a value
of 'interfaceAlias(2)', then the octet string identifies
a particular instance of the ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifAlias object does not contain any values,
another chassis identifier type should be used.
If the associated LldpChassisIdSubtype object has a value
of 'portComponent(3)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component within
the containing chassis.
If the associated LldpChassisIdSubtype object has a value of
'macAddress(4)', then this string identifies a particular
unicast source address (encoded in network byte order and
IEEE 802.3 canonical bit order), of a port on the containing
chassis as defined in IEEE Std 802-2001.
If the associated LldpChassisIdSubtype object has a value of
'networkAddress(5)', then this string identifies a particular
network address, encoded in network byte order, associated
with one or more ports on the containing chassis. The first
octet contains the IANA Address Family Numbers enumeration
value for the specific address type, and octets 2 through
N contain the network address value in network byte order.
If the associated LldpChassisIdSubtype object has a value
of 'interfaceName(6)', then the octet string identifies
a particular instance of the ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifName object does not contain any values,
another chassis identifier type should be used.
If the associated LldpChassisIdSubtype object has a value of
'local(7)', then this string identifies a locally assigned
Chassis ID."
SYNTAX OCTET STRING (SIZE (1..255))
LldpPortIdSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the source of a particular type of port
identifier used in the LLDP MIB.
The enumeration 'interfaceAlias(1)' represents a port
identifier based on the ifAlias MIB object, defined in IETF
RFC 2863.
The enumeration 'portComponent(2)' represents a port
identifier based on the value of entPhysicalAlias (defined in
IETF RFC 2737) for a port component (i.e., entPhysicalClass
value of 'port(10)'), within the containing chassis.
The enumeration 'macAddress(3)' represents a port identifier
based on a unicast source address (encoded in network
byte order and IEEE 802.3 canonical bit order), which has
been detected by the agent and associated with a particular
port (IEEE Std 802-2001).
The enumeration 'networkAddress(4)' represents a port
identifier based on a network address, detected by the agent
and associated with a particular port.
The enumeration 'interfaceName(5)' represents a port
identifier based on the ifName MIB object, defined in IETF
RFC 2863.
The enumeration 'agentCircuitId(6)' represents a port
identifier based on the agent-local identifier of the circuit
(defined in RFC 3046), detected by the agent and associated
with a particular port.
The enumeration 'local(7)' represents a port identifier
based on a value locally assigned."
SYNTAX INTEGER {
interfaceAlias(1),
portComponent(2),
macAddress(3),
networkAddress(4),
interfaceName(5),
agentCircuitId(6),
local(7)
}
LldpPortId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the format of a port identifier string.
Objects of this type are always used with an associated
LldpPortIdSubtype object, which identifies the format of the
particular LldpPortId object instance.
If the associated LldpPortIdSubtype object has a value of
'interfaceAlias(1)', then the octet string identifies a
particular instance of the ifAlias object (defined in IETF
RFC 2863). If the particular ifAlias object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'portComponent(2)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component.
If the associated LldpPortIdSubtype object has a value of
'macAddress(3)', then this string identifies a particular
unicast source address (encoded in network byte order
and IEEE 802.3 canonical bit order) associated with the port
(IEEE Std 802-2001).
If the associated LldpPortIdSubtype object has a value of
'networkAddress(4)', then this string identifies a network
address associated with the port. The first octet contains
the IANA AddressFamilyNumbers enumeration value for the
specific address type, and octets 2 through N contain the
networkAddress address value in network byte order.
If the associated LldpPortIdSubtype object has a value of
'interfaceName(5)', then the octet string identifies a
particular instance of the ifName object (defined in IETF
RFC 2863). If the particular ifName object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'agentCircuitId(6)', then this string identifies a agent-local
identifier of the circuit (defined in RFC 3046).
If the associated LldpPortIdSubtype object has a value of
'local(7)', then this string identifies a locally
assigned port ID."
SYNTAX OCTET STRING (SIZE (1..255))
LldpManAddrIfSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the basis of a particular type of
interface associated with the management address.
The enumeration 'unknown(1)' represents the case where the
interface is not known.
The enumeration 'ifIndex(2)' represents interface identifier
based on the ifIndex MIB object.
The enumeration 'systemPortNumber(3)' represents interface
identifier based on the system port numbering convention."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.5"
SYNTAX INTEGER {
unknown(1),
ifIndex(2),
systemPortNumber(3)
}
LldpManAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of a management address associated with the LLDP
agent that may be used to reach higher layer entities to
assist discovery by network management.
It should be noted that appropriate security credentials,
such as SNMP engineId, may be required to access the LLDP
agent using a management address. These necessary credentials
should be known by the network management and the objects
associated with the credentials are not included in the
LLDP agent."
SYNTAX OCTET STRING (SIZE (1..31))
LldpSystemCapabilitiesMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the system capabilities.
The bit 'other(0)' indicates that the system has capabilities
other than those listed below.
The bit 'repeater(1)' indicates that the system has repeater
capability.
The bit 'bridge(2)' indicates that the system has bridge
capability.
The bit 'wlanAccessPoint(3)' indicates that the system has
WLAN access point capability.
The bit 'router(4)' indicates that the system has router
capability.
The bit 'telephone(5)' indicates that the system has telephone
capability.
The bit 'docsisCableDevice(6)' indicates that the system has
DOCSIS Cable Device capability (IETF RFC 2669 & 2670).
The bit 'stationOnly(7)' indicates that the system has only
station capability and nothing else."
SYNTAX BITS {
other(0),
repeater(1),
bridge(2),
wlanAccessPoint(3),
router(4),
telephone(5),
docsisCableDevice(6),
stationOnly(7)
}
LldpPortNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Each port contained in the chassis (that is known to the
LLDP agent) is uniquely identified by a port number.
A port number has no mandatory relationship to an
InterfaceIndex object (of the interfaces MIB, IETF RFC 2863).
If the LLDP agent is a IEEE 802.1D, IEEE 802.1Q bridge, the
LldpPortNumber will have the same value as the dot1dBasePort
object (defined in IETF RFC 1493) associated corresponding
bridge port. If the system hosting LLDP agent is not an
IEEE 802.1D or an IEEE 802.1Q bridge, the LldpPortNumber
will have the same value as the corresponding interface's
InterfaceIndex object.
Port numbers should be in the range of 1 and 4096 since a
particular port is also represented by the corresponding
port number bit in LldpPortList."
SYNTAX Integer32(1..4096)
LldpPortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight ports,
with the first octet specifying ports 1 through 8, the second
octet specifying ports 9 through 16, etc. Within each octet,
the most significant bit represents the lowest numbered port,
and the least significant bit represents the highest numbered
port. Thus, each port of the system is represented by a
single bit within the value of this object. If that bit has
a value of '1' then that port is included in the set of ports;
the port is not included if its bit has a value of '0'."
REFERENCE
"IETF RFC 2674 section 5"
SYNTAX OCTET STRING(SIZE(0..512))
TimeFilter ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"To be used for the index to a table. Allows an application
to download only those rows changed since a particular time.
Note that this is not a history mechanism. Only current values
of underlying objects are returned; saved instance values
associated with particular values of sysUpTime are not.
An entry is considered changed if the value of any object in the
entry changes, if the row is created, or if any object in the
entry is created or deleted. Note that deleted entries cannot
be detected or downloaded.
A time-filtered conceptual table is created by inserting a
single object of SYNTAX TimeFilter as the first INDEX component
in a copy of an existing basic conceptual table (i.e., any
SEQUENCE without a TimeFilter INDEX component). Thus, for
each conceptual entry 'I' in the basic table, there exists N
conceptual entries in the time-filtered version, indexed N.I,
where 'N' is equal to the value of sysUpTime.
When an application retrieves conceptual instances from a
time-filtered table, and an INDEX value is provided for the
TimeFilter INDEX component 'N', the agent will only consider
returning basic conceptual entries (e.g., 'fooColumn.N.I') if
any column within the basic conceptual entry has changed since
sysUpTime 'N'. If not, the basic conceptual entry will
be ignored for the particular retrieval operation.
When sysUpTime is equal to zero, this table shall be empty.
One conceptual entry exists for each past value of sysUpTime,
except that the whole table is purged should sysUpTime wrap.
As an entry in a time-filtered table is updated (i.e., one of
the columns in the basic conceptual table is changed), new
conceptual entries are also created in the time-filtered version
(which still shares the now updated object values with all other
instances). The number of unique time-filtered instances that
are created is determined by the value of sysUpTime at which the
basic entry was last updated. One unique instance will exist
for each value of sysUpTime at the last update time for the row.
However, a new TimeFilter index instance is created for each new
sysUpTime value. The TimeFilter index values not associated
with entry updates are called duplicate time-filtered instances.
After some deployment experience, it has been determined that
a time-filtered table is more efficient if the agent
stops a MIB walk operation by skipping over rows with a
TimeFilter index value higher than the value in the received
GetNext/GetBulk request. That is, instead of incrementing a
TimeFilter index value, the agent will continue to the next
object or table. As a consequence, GetNext or GetBulk
operations will provide only one pass through a time-filtered
table.
It is suggested that an agent implement a time-filtered table
in this manner to improve performance and avoid a MIB walk
getting stuck in time-filtered tables. It is, however, still
acceptable for an agent to implement a time-filtered table in
the traditional manner (i.e., every conceptual time-filtered
instance is returned in GetNext and GetBulk PDU responses), and
management applications must be able to deal with such
traditional implementations.
See the appendix for further discussion of this textual
convention.
The following example is provided to demonstrate TimeFilter
behavior:
Consider the following basic conceptual table, basicFooTable.
(Note that the basic version of a time-filtered table may not
actually be defined.)
basicFooTable:
basicFooTable ...
INDEX { fooIndex }
BasicFooEntry {
fooIndex Integer32,
fooCounts Counter32
}
For this example, the basicFooTable contains two static
conceptual entries (fooIndex equals '1' and '2'), created at
time zero. It also contains one dynamic conceptual entry
(fooIndex equals '3'), which is created at time '3' and deleted
at time '7'.
The time-filtered version of the basicFooTable could be defined
as follows:
FooTable:
fooTable ...
INDEX { fooTimeMark, fooIndex }
FooEntry {
fooTimeMark TimeFilter,
fooIndex Integer32,
fooCounts Counter32
}
Note that entries exist in the time-filtered conceptual table
only if they actually exist in the underlying (basic) table.
For this example, the fooTable will have three underlying
basic entries (fooIndex == 1, 2, and 3), with the following
activity (for sysUpTime equal 0 to 9):
- fooEntry.N.1 is created at time '0' and most recently
updated at time '6' to the value '5'.
- fooEntry.N.2 is created at time '0' and most recently
updated at time '8' to the value '9'.
- fooEntry.N.3 is created at time '3', updated at time '5'
to the value '17', and deleted at time '7'.
The following tables show the values that would be returned for
MIB walk operations with various TimeFilter values, done at
different times. An application issues a retrieval request at
time 'T', with a TimeFilter value, 'N' (typically set to a lower
value, such as the value of sysUpTime at the last polling cycle).
The following values would be returned in a MIB walk of
fooCounts.N if T equals '0' and N equals '0':
fooCounts.N.I Value
==========================
fooCounts.0.1 0
fooCounts.0.2 0
Note that nothing is returned for fooCounts.0.3, since that
entry does not exist at sysUpTime equals '0'.
The following values would be returned in a full (traditional) MIB
walk of fooCounts.N if T equals '3' and N equals '0':
fooCounts.N.I Value
=======================
fooCounts.0.1 0
fooCounts.0.2 0
fooCounts.0.3 0
fooCounts.1.3 0
fooCounts.2.3 0
fooCounts.3.3 0
Note that there are no instances for T equals 1 or 2 for the
first two values of N, as these entries did not change
since they were created at time '0'.
Note that the current value for 'fooCounts.N.3' is returned
here, even for values of N less than '3' (when the entry was
created). The agent only considers the current existence of an
entry in the TimeFilter algorithm, not the time when the entry
was created.
Note that the instances 'fooCounts.0.3', 'fooCounts.1.3',
and 'fooCounts.2.3' are duplicates and can be suppressed by the
agent in a MIB walk.
The following values would be returned in a full (traditional)
MIB walk of fooCounts.N if T equals '6' and N equals '3':
fooCounts.N.I Value
=======================
fooCounts.3.1 5
fooCounts.3.3 17
fooCounts.4.1 5
fooCounts.4.3 17
fooCounts.5.1 5
fooCounts.5.3 17
fooCounts.6.1 5
Note that no instances for entry 'fooCounts.N.2' are returned,
since it has not changed since time '3'.
Note that all instances except 'fooCounts.5.3' and
'fooCounts.6.1' are duplicates and can be suppressed by the
agent in a MIB walk.
The following values would be returned in a full (traditional)
MIB walk of fooCounts.N if T equals '9' and N equals '6':
fooCounts.N.I Value
=======================
fooCounts.6.1 5
fooCounts.6.2 9
fooCounts.7.2 9
fooCounts.8.2 9
Note that no instances for entry 'fooCounts.N.3' are returned,
since it was deleted at time '7'.
Note that instances 'fooCounts.6.2' and 'fooCounts.7.2'
are duplicates and can be suppressed by the agent in a MIB
walk."
SYNTAX TimeTicks
LldpPowerPortClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the Power over Ethernet (PoE) port class."
SYNTAX INTEGER {
pClassPSE(1),
pClassPD(2)
}
LldpLinkAggStatusMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the link aggregation status.
The bit 'aggCapable(0)' indicates the link is capable of being
aggregated.
The bit 'aggEnabled(1)' indicates the link is currently in
aggregation."
SYNTAX BITS {
aggCapable(0),
aggEnabled(1)
}
ZeroBasedCounter32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes an object that counts events with the
following semantics: objects of this type will be set to
zero(0) on creation and will thereafter count appropriate
events, wrapping back to zero(0) when the value 2^32 is
reached.
Provided that an application discovers the new object within
the minimum time to wrap, it can use the initial value as a
delta since it last polled the table of which this object is
part. It is important for a management station to be aware of
this minimum time and the actual time between polls, and to
discard data if the actual time is too long or there is no
defined minimum time.
Typically, this TC is used in tables where the INDEX space is
constantly changing and/or the TimeFilter mechanism is in use."
SYNTAX Gauge32
Ipv6Address ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x:"
STATUS current
DESCRIPTION
"This data type is used to model IPv6 addresses.
This is a binary string of 16 octets in network
byte-order."
SYNTAX OCTET STRING (SIZE (16))
InetAddressPrefixLength ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Denotes the length of a generic Internet network address
prefix. A value of n corresponds to an IP address mask
that has n contiguous 1-bits from the most significant
bit (MSB), with all other bits set to 0.
An InetAddressPrefixLength value is always interpreted within
the context of an InetAddressType value. Every usage of the
InetAddressPrefixLength textual convention is required to
specify the InetAddressType object that provides the
context. It is suggested that the InetAddressType object be
logically registered before the object(s) that use the
InetAddressPrefixLength textual convention, if they appear
in the same logical row.
InetAddressPrefixLength values larger than
the maximum length of an IP address for a specific
InetAddressType are treated as the maximum significant
value applicable for the InetAddressType. The maximum
significant value is 32 for the InetAddressType
'ipv4(1)' and 'ipv4z(3)' and 128 for the InetAddressType
'ipv6(2)' and 'ipv6z(4)'. The maximum significant value
for the InetAddressType 'dns(16)' is 0.
The value zero is object-specific and must be defined as
part of the description of any object that uses this
syntax. Examples of the usage of zero might include
situations where the Internet network address prefix
is unknown or does not apply.
The upper bound of the prefix length has been chosen to
be consistent with the maximum size of an InetAddress."
SYNTAX Unsigned32 (0..2040)
DStormCtlTrafficType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of storm control traffic type.
broadcast(1) - broadcast storm.
multicast(2) - including unknown L2 multicast, known L2
multicast, unknown IP multicast and known
IP multicast.
unicast(3) - when the action is configured as 'shutdown mode',
unicast refers to both known and unknown
unicast packet; Otherwise, unicast refers to
unknown unicast packet. "
SYNTAX INTEGER {
broadcast(1),
multicast(2),
unicast(3)
}
DStormCtlThrType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of storm control threshold is configured on an interface.
pps(1) - the threshold is configured as packet count per second.
kbps(2) - the threshold is configured as a rate of bits per second.
percentage(3) - the threshold is configured as a percentage of total
bandwidth per port.
"
SYNTAX INTEGER {
pps(1),
kbps(2),
percentage(3)
}
DStormCtlThrTypeValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic threshold value.
A DStormCtlThrTypeValue value is always interpreted within the context
of a DStormCtlThrType value. Every usage of the DStormCtlThrTypeValue
textual convention is required to specify the DStormCtlThrType
object that provides the context.
The unit and valid range are as follows:
Threshold Type Unit Valid Range
============= ===================== =================
pps packet per second 1 ~ 2147483647
kbps bits per second 1 ~ 2147483647
percentage percentage 1 ~ 100
The special value of -1 indicates this object is undefined.
"
SYNTAX Integer32
VlanIdOrNone ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The VLAN-ID that uniquely identifies a specific VLAN,
or no VLAN. The special value of zero is used to
indicate that no VLAN-ID is present or used. This can
be used in any situation where an object or a table entry
must refer either to a specific VLAN, or to no VLAN.
Note that a MIB object that is defined using this
TEXTUAL-CONVENTION should clarify the meaning of
'no VLAN' (i.e., the special value 0)."
SYNTAX Integer32 (0 | 1..4094)
OuiComponentType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents an OUI component type.
Note: The component type 'dlink' indicates default OUI and is not
used for setting.
"
SYNTAX INTEGER {
vms(0),
vmsClient(1),
videoEncoder(2),
networkStorage(3),
dlink(4),
other(5)
}
--InterfaceIndexOrZero ::= TEXTUAL-CONVENTION
-- DISPLAY-HINT "d"
-- STATUS current
-- DESCRIPTION
-- "This textual convention is an extension of the
-- InterfaceIndex convention. The latter defines a greater
-- than zero value used to identify an interface or interface
-- sub-layer in the managed system. This extension permits the
-- additional value of zero. the value zero is object-specific
-- and must therefore be defined as part of the description of
-- any object which uses this syntax. Examples of the usage of
-- zero might include situations where interface was unknown,
-- or when none or all interfaces need to be referenced."
-- SYNTAX Integer32 (0..2147483647)
-- ----------------------------------------------------------------- --
-- groups in the MIB
-- ----------------------------------------------------------------- --
dlinkDeviceInfo OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 1 }
deviceInfoGroup OBJECT IDENTIFIER ::= { dlinkDeviceInfo 1 }
dlinkSystem OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 2 }
sysInformationGroup OBJECT IDENTIFIER ::= { dlinkSystem 1 }
syslogGroup OBJECT IDENTIFIER ::= { dlinkSystem 4 }
sysPortConfigGroup OBJECT IDENTIFIER ::= { dlinkSystem 13 }
sysSNTPSettingGroup OBJECT IDENTIFIER ::= { dlinkSystem 17 }
sysTimeRangeGroup OBJECT IDENTIFIER ::= { dlinkSystem 38 }
dlinkManagement OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 3 }
mgtUserAccountGroup OBJECT IDENTIFIER ::= { dlinkManagement 1 }
mgtPasswordEncryptionGroup OBJECT IDENTIFIER ::= { dlinkManagement 2 }
mgtSnmpGroup OBJECT IDENTIFIER ::= { dlinkManagement 3 }
mgtRMONGroup OBJECT IDENTIFIER ::= { dlinkManagement 4 }
mgtTelnetWebGroup OBJECT IDENTIFIER ::= { dlinkManagement 5 }
mgtSessionTimeoutGroup OBJECT IDENTIFIER ::= { dlinkManagement 6 }
mgtDDPGroup OBJECT IDENTIFIER ::= { dlinkManagement 14 }
dlinkL2Features OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 4 }
l2FDBGroup OBJECT IDENTIFIER ::= { dlinkL2Features 1 }
l2Dot1qVlanGroup OBJECT IDENTIFIER ::= { dlinkL2Features 2 }
l2STPGroup OBJECT IDENTIFIER ::= { dlinkL2Features 3 }
l2LBDGroup OBJECT IDENTIFIER ::= { dlinkL2Features 4 }
l2LAGroup OBJECT IDENTIFIER ::= { dlinkL2Features 5 }
l2MulticastCtrlGroup OBJECT IDENTIFIER ::= { dlinkL2Features 6 }
l2LLDPGroup OBJECT IDENTIFIER ::= { dlinkL2Features 7 }
l2VoiceVlanGroup OBJECT IDENTIFIER ::= { dlinkL2Features 8 }
l2AutoSurveillanceVlanGroup OBJECT IDENTIFIER ::= { dlinkL2Features 9 }
l2ErpsGroup OBJECT IDENTIFIER ::= { dlinkL2Features 10 }
dlinkL3Features OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 5 }
l3ARPGroup OBJECT IDENTIFIER ::= { dlinkL3Features 1 }
l3IpMgmtGroup OBJECT IDENTIFIER ::= { dlinkL3Features 3 }
dlinkQoS OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 6 }
qosBasicSettingsGroup OBJECT IDENTIFIER ::= { dlinkQoS 1 }
dlinkACL OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 7 }
aclGroup OBJECT IDENTIFIER ::= { dlinkACL 1 }
dlinkSecurity OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 8 }
securityportSecurityGroup OBJECT IDENTIFIER ::= { dlinkSecurity 1 }
securityPnacGroup OBJECT IDENTIFIER ::= { dlinkSecurity 2 }
securityAAAGroup OBJECT IDENTIFIER ::= { dlinkSecurity 3 }
securityRadiusGroup OBJECT IDENTIFIER ::= { dlinkSecurity 4 }
securityDhcpSerScrGroup OBJECT IDENTIFIER ::= { dlinkSecurity 7 }
securityNetworkAuthGroup OBJECT IDENTIFIER ::= { dlinkSecurity 12 }
securitySafeGuardGroup OBJECT IDENTIFIER ::= { dlinkSecurity 13 }
securityTrustedHostGroup OBJECT IDENTIFIER ::= { dlinkSecurity 14 }
securityTrafficSegmentationGroup OBJECT IDENTIFIER ::= { dlinkSecurity 15 }
securityStormCtrlGroup OBJECT IDENTIFIER ::= { dlinkSecurity 16 }
securityDoSprevGroup OBJECT IDENTIFIER ::= { dlinkSecurity 17 }
securitySSLGroup OBJECT IDENTIFIER ::= { dlinkSecurity 19 }
dlinkOAM OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 9 }
oamCableDiagGroup OBJECT IDENTIFIER ::= { dlinkOAM 1 }
dlinkMonitoring OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 10 }
monStatisticsGroup OBJECT IDENTIFIER ::= { dlinkMonitoring 2 }
monMirrorGroup OBJECT IDENTIFIER ::= { dlinkMonitoring 3 }
dlinkGreen OBJECT IDENTIFIER ::= { dxs-1210-12sc-AX 11 }
dlinkPowersavingGroup OBJECT IDENTIFIER ::= { dlinkGreen 1 }
dlinkEEEGroup OBJECT IDENTIFIER ::= { dlinkGreen 2 }
-- ---------------------------------------------------------------- --
-- ------------------------------------------------------------------
-- device info
-- ------------------------------------------------------------------
systemName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System name used for identification of the device.
The following characters are allowed to input."
::= { sysInformationGroup 1 }
systemLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The location name of this node (e.g., `telephone closet,
3rd floor'). If the location is unknown, the value is
the zero-length string."
::= { sysInformationGroup 2 }
systemContact OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The textual identification of the contact person for
this managed node, together with information on how
to contact this person. If no contact information is
known, the value is the zero-length string."
::= { sysInformationGroup 3 }
-- ------------------------------------------------------------------
-- Port Configuration group
-- ------------------------------------------------------------------
-- Port Settings
portCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { sysPortConfigGroup 1 }
portCtrlEntry OBJECT-TYPE
SYNTAX PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { portSetIndex , portSetMediaType }
::= { portCtrlTable 1 }
PortCtrlEntry ::=
SEQUENCE {
portSetIndex
Integer32,
portSetMediaType
INTEGER,
portSetState
INTEGER,
portSetFlowControl
INTEGER,
portSetDuplex
INTEGER,
portSetSpeed
INTEGER,
portSetCapaAdvertised
INTEGER,
portSetDescription
DisplayString,
portSetLinkStatus
INTEGER
}
portSetIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { portCtrlEntry 1 }
portSetMediaType OBJECT-TYPE
SYNTAX INTEGER {
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media Type."
::= { portCtrlEntry 2 }
portSetState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables Port state."
::= { portCtrlEntry 3 }
portSetFlowControl OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"On / off flow control for the interface."
::= { portCtrlEntry 4 }
portSetDuplex OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
full(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures port settings auto/half/full mode."
::= { portCtrlEntry 5 }
portSetSpeed OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
rate100M(2),
rate1000M(3),
rate1000M-Master(4),
rate1000M-Slave(5),
rate10G(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures port settings speed."
::= { portCtrlEntry 6 }
portSetCapaAdvertised OBJECT-TYPE
SYNTAX INTEGER {
-- none (0),
adv100M (1),
adv1G (2),
adv100M-1G (3),
adv10G(4),
adv100M-10G (5),
adv1G-10G (6),
adv100M-1G-10G (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures port settings interface capability advertised 100M/1000M/10G ."
::= { portCtrlEntry 7 }
portSetDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures port settings Description."
::= { portCtrlEntry 8 }
portSetLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show port settings LinkStatus up /down."
::= { portCtrlEntry 9 }
-- Port Status
portStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { sysPortConfigGroup 2 }
portStatusEntry OBJECT-TYPE
SYNTAX PortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { portStaIndex , portStaMediaType }
::= { portStatusTable 1 }
PortStatusEntry ::=
SEQUENCE {
portStaIndex
Integer32,
portStaMediaType
INTEGER,
portStaStatus
INTEGER ,
portStaMacAddr
MacAddress,
portStaVlan
INTEGER,
portStaFlowCtrlOpSend
INTEGER ,
portStaFlowCtrlOpRece
INTEGER ,
portStaDuplex
INTEGER ,
portStaSpeed
-- INTEGER ,
-- portStaType
INTEGER
}
portStaIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { portStatusEntry 1 }
portStaMediaType OBJECT-TYPE
SYNTAX INTEGER {
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media Type."
::= { portStatusEntry 2 }
portStaStatus OBJECT-TYPE
SYNTAX INTEGER {
connected(1),
notconnected(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show port status Link Status up /down."
::= { portStatusEntry 3 }
portStaMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show port status MAC Address."
::= { portStatusEntry 4 }
portStaVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN-ID assigned to untagged frames received on this port.
The port in native VLAN will also been set as untagged as default setting."
::= { portStatusEntry 5 }
portStaFlowCtrlOpSend OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On / off flow control Operator Send for the interface."
::= { portStatusEntry 6 }
portStaFlowCtrlOpRece OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On / off flow control Operator Receive for the interface."
::= { portStatusEntry 7 }
portStaDuplex OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
full(2),
auto-full(3),
auto-falf(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show port Status Duplex auto/full mode."
::= { portStatusEntry 8 }
portStaSpeed OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
rate100M(2),
rate1000M(3),
rate1000M-Master(4),
rate1000M-Slave(5),
rate10G(6),
auto-rate100M(7),
auto-rate1000M(8),
auto-rate10G(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show port Status speed."
::= { portStatusEntry 9 }
-- portStaType OBJECT-TYPE
-- SYNTAX INTEGER {
-- rate10GBase-T(1),
-- rate10GBase-R(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Show port Status Type."
-- ::= { portStatusEntry 10 }
-- ------------------------------------------------------------------
-- Error Disable Group
-- ------------------------------------------------------------------
errDisAssertTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object control whether sending trap or not when port entering into Err Disable state."
::= { sysPortConfigGroup 3 }
errDisClearTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object control whether sending trap or not when port exiting from Err Disable state."
::= { sysPortConfigGroup 4 }
errDisNotificationRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Expressed in the number of notifications can be generated
per minute.
This object configures the rate-limit of SNMP Notification for
errDisable feature.
A value of 0 indicates that an SNMP Notification is generated
for every error disabled event."
::= { sysPortConfigGroup 5 }
--------------------------Error Disable Interface Table----------------
errDisIfStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErrDisIfStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Error Disable table."
::= { sysPortConfigGroup 6 }
errDisIfStatusEntry OBJECT-TYPE
SYNTAX ErrDisIfStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for the err port of the device."
INDEX { errDisIfStatusPortIndex, errDisIfStatusVlanIndex }
::= { errDisIfStatusTable 1 }
ErrDisIfStatusEntry ::=
SEQUENCE {
errDisIfStatusPortIndex
INTEGER,
errDisIfStatusVlanIndex
INTEGER,
errDisPortState
INTEGER,
errDisPortConnectStatus
INTEGER,
errDisPortReason
INTEGER,
errDisPortRecoveryTimeLeft
INTEGER
}
errDisIfStatusPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the interface index of the interface
disabled by a feature."
::= { errDisIfStatusEntry 1 }
errDisIfStatusVlanIndex OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN in the given interface
that has been error-disabled."
::= { errDisIfStatusEntry 2 }
errDisPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the port state is enabled or disabled."
::= { errDisIfStatusEntry 3 }
errDisPortConnectStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
err-disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the PortStatus is err-disabled."
::= { errDisIfStatusEntry 4 }
errDisPortReason OBJECT-TYPE
SYNTAX INTEGER {
portsecurity(1),
stormControl(2),
arpRateLimit(3),
bpduRateLimit(4),
dhcpRateLimit(5),
loopbackDetect(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicats the reason for Port Error Disable event occur."
::= { errDisIfStatusEntry 5 }
errDisPortRecoveryTimeLeft OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicats the remaining time for Port Error Disable state recovery."
::= { errDisIfStatusEntry 6 }
----------------------Error Disable Recovery -----------------------------
errDisRecoveryTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErrDisRecoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the recovery mechanism for the features with
error-disable functionality."
::= { sysPortConfigGroup 7 }
errDisRecoveryEntry OBJECT-TYPE
SYNTAX ErrDisRecoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created for each feature which has error-disable
functionality."
INDEX { errDisRecoveryReason }
::= { errDisRecoveryTable 1 }
ErrDisRecoveryEntry ::= SEQUENCE {
errDisRecoveryReason INTEGER,
errDisRecoveryStatus INTEGER,
errDisRecoveryInterval INTEGER
}
errDisRecoveryReason OBJECT-TYPE
SYNTAX INTEGER {
portsecurity(1),
stormControl(2),
arpRateLimit(3),
bpduRateLimit(4),
dhcpRateLimit(5),
loopbackDetect(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the cause of error-disable."
::= { errDisRecoveryEntry 1 }
errDisRecoveryStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system can
automatically recover a system entity that has been
disabled by the cause."
::= { errDisRecoveryEntry 2 }
errDisRecoveryInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the error-recovery time interval on specific cause
to recover the port/interface from the error disabled situation."
::= { errDisRecoveryEntry 3 }
----------------------Error Disable Trap -----------------------------
errDisTraps OBJECT IDENTIFIER ::= { sysPortConfigGroup 8 }
errDisTrapsList OBJECT IDENTIFIER ::= { errDisTraps 0 }
errDisNotifyPortDisabledAssert NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The trap is sent when a port enters into error disabled state."
::= {errDisTrapsList 1 }
errDisNotifyPortDisabledClear NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The trap is sent when a port recovery from error disabled state."
::= {errDisTrapsList 2 }
errDisNotifyVlanDisabledAssert NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The trap is sent when a Port with a VID loop occurs."
::= {errDisTrapsList 3 }
errDisNotifyVlanDisabledClear NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The trap is sent when a Port with a VID restarts after the interval time."
::= {errDisTrapsList 4 }
-- Jumbo Frame
jumboFrameTable OBJECT-TYPE
SYNTAX SEQUENCE OF JumboFrameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { sysPortConfigGroup 14 }
jumboFrameEntry OBJECT-TYPE
SYNTAX JumboFrameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { portIndex }
::= { jumboFrameTable 1 }
JumboFrameEntry ::=
SEQUENCE {
portIndex
Integer32,
maxReceFrameSize
Integer32
}
portIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { jumboFrameEntry 1 }
maxReceFrameSize OBJECT-TYPE
SYNTAX Integer32 (1518..9216)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { jumboFrameEntry 2 }
-- ----------------------------------------------------------
-- The 802.1Q VLAN Groups
-- ----------------------------------------------------------
dot1qVlanAsyOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IEEE 802.1Q Asymmetric VLAN"
::= { l2Dot1qVlanGroup 1 }
-- -------------------------------------------------------------
-- The VLAN Database
-- -------------------------------------------------------------
dot1qVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { l2Dot1qVlanGroup 2 }
dot1qVlanEntry OBJECT-TYPE
SYNTAX Dot1qVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a VLAN configured into the
device by (local or network) management."
INDEX { dot1qVlanid }
::= { dot1qVlanTable 1 }
Dot1qVlanEntry ::=
SEQUENCE {
dot1qVlanid
Integer32,
dot1qVlanName
SnmpAdminString,
dot1qVlanEgressPorts
PortList,
dot1qVlanUntaggedPorts
PortList,
dot1qVlanRowStatus
RowStatus
}
dot1qVlanid OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan id used to identify the VLAN."
::= { dot1qVlanEntry 1 }
dot1qVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the VLAN."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { dot1qVlanEntry 2 }
dot1qVlanEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in dot1qVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
::= { dot1qVlanEntry 3 }
dot1qVlanUntaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { dot1qVlanEntry 4 }
dot1qVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of a row in sysDot1qVlanTable. By setting this object, new
entries can be created in sysDot1qVlanTable and existing entries can be
removed from sysDot1qVlanTable. It can be used as specified in the SNMP
v2 standard."
::= { dot1qVlanEntry 99 }
-- -------------------------------------------------------------
-- The VLAN Port Configuration Table
-- -------------------------------------------------------------
dot1qVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port control and status
information for VLAN configuration in the device."
::= { l2Dot1qVlanGroup 3 }
dot1qVlanPortEntry OBJECT-TYPE
SYNTAX Dot1qVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling VLAN configuration for a port
on the device."
INDEX { dot1qVlanPortIndex }
::= { dot1qVlanPortTable 1 }
Dot1qVlanPortEntry ::=
SEQUENCE {
dot1qVlanPortIndex
Integer32,
dot1qVlanPortVlanMode
INTEGER,
dot1qVlanPortAcceptableFrameType
INTEGER,
dot1qVlanPortIngressChecking
INTEGER,
dot1qVlanPortNativeVlanStatus
INTEGER,
dot1qVlanPortNativeVlanId
INTEGER,
dot1qVlanPortTagVlanList
VlanList,
dot1qVlanPortUntagVlanList
VlanList
}
dot1qVlanPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port index."
::= { dot1qVlanPortEntry 1 }
dot1qVlanPortVlanMode OBJECT-TYPE
SYNTAX INTEGER {
access (1),
trunk (2),
hybrid (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to specify the VLAN mode for the port.
Use the no command to reset the VLAN mode to the
default setting."
::= { dot1qVlanPortEntry 2 }
dot1qVlanPortAcceptableFrameType OBJECT-TYPE
SYNTAX INTEGER {
admitAll (1),
admitTagged (2),
admitUntagged (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to set the acceptable types of frames by
a port. Use the no form of the command to reset to the
default setting."
::= { dot1qVlanPortEntry 3 }
dot1qVlanPortIngressChecking OBJECT-TYPE
SYNTAX INTEGER {
true (1),
false (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to enable ingress checking for frames received
by a port. Use the no command to disable the ingress check."
::= { dot1qVlanPortEntry 4 }
dot1qVlanPortNativeVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
tag (1),
untag (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether enable tagging or untagging mode
of the native VLAN on the interface.
This value is meaningful only to TRUNK port.Access port and hybrid
port MUST keep disabled."
::= { dot1qVlanPortEntry 5 }
dot1qVlanPortNativeVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN-ID assigned to untagged frames received on this port.
The port in native VLAN will also been set as untagged as default setting."
::= { dot1qVlanPortEntry 6 }
dot1qVlanPortTagVlanList OBJECT-TYPE
SYNTAX VlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tagged VLAN list which the port belongs to."
::= { dot1qVlanPortEntry 7 }
dot1qVlanPortUntagVlanList OBJECT-TYPE
SYNTAX VlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The untagged VLAN list which the port belongs to."
::= { dot1qVlanPortEntry 8 }
-- ----------------------------------------------------------------
-- The STP group
-- ----------------------------------------------------------------
stpProtocolSetting OBJECT IDENTIFIER ::= { l2STPGroup 1 }
stpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative module status requested by management for the STP
Module. This enables or disables STP in the system. A value of 'enabled'
(1) indicates that STP must be enabled in the device on all the ports.
A value of 'disabled'(2) indicates that STP must be disabled in the
device on all the ports."
::= {stpProtocolSetting 1 }
stpNewRootTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling STP new root Trap."
::= { stpProtocolSetting 2 }
stpTopologyChangeTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling STP topology change Trap."
::= { stpProtocolSetting 3 }
stpVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
indicates the Multiple Spanning Tree Protocol Specified
in IEEE 802.1s."
REFERENCE
"IEEE 802.1D-2004"
DEFVAL { rstp }
::= { stpProtocolSetting 4 }
stpBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { stpProtocolSetting 5 }
stpBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {2000}
::= { stpProtocolSetting 6 }
stpBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second."
::= { stpProtocolSetting 7 }
stpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {1500}
::= { stpProtocolSetting 8 }
stpMaxHopCount OBJECT-TYPE
SYNTAX Integer32 (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Maximum Hop Count value. One-hundredth of the
configured value will be set as Max Hop Count.
An agent may return a badValue error if a set is attempted
to a value which is not a multiples of hundred."
DEFVAL { 2000 }
::= { stpProtocolSetting 9 }
stpTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
DEFVAL { 3 }
::= { stpProtocolSetting 10 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Port Table : CIST
-- -----------------------------------------------------------------
stpPortConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Common Spanning Tree Port
Information."
::= { l2STPGroup 2 }
stpPortConfigurationEntry OBJECT-TYPE
SYNTAX StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for
Common Spanning tree."
INDEX { stpPort }
::= { stpPortConfigurationTable 1 }
StpPortEntry ::=
SEQUENCE {
stpPort
Integer32,
stpPortAdminPathCost
Integer32,
stpPortPathCost
Integer32,
stpPortState
INTEGER,
stpPortGuardRoot
TruthValue,
stpPortLinkType
INTEGER,
stpPortOperLinkType
INTEGER,
stpPortFast
INTEGER,
stpPortOperFast
INTEGER,
stpPortTCNFilter
TruthValue,
stpPortFowardBPDU
INTEGER,
stpPortPriority
Integer32,
stpPortHelloTime
Timeout
}
stpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { stpPortConfigurationEntry 1 }
stpPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read."
::= { stpPortConfigurationEntry 2 }
stpPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { stpPortConfigurationEntry 3 }
stpPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contexts."
::= { stpPortConfigurationEntry 4 }
stpPortGuardRoot OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Port after the Root Port has been selected. This
parameter should be FALSE by default. If set it can cause lack of
spanning tree connectivity. It is set by a network administrator to
prevent bridges external to a core region of the network influencing
the spanning tree active topology, possibly because those bridges are
not under the full control of the administrator.
This administrator configuration is also known as 'Root Guard'."
::= {stpPortConfigurationEntry 5}
stpPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(0),
shared(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of p2p(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of shared(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { stpPortConfigurationEntry 6 }
stpPortOperLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
shared(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the stpPortLinkType object."
::= { stpPortConfigurationEntry 7 }
stpPortFast OBJECT-TYPE
SYNTAX INTEGER {
edge(0),
disabled(1),
network(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of edge(0) indicates that this port should be
assumed as an edge-port and a value of disabled(1) indicates
that this port should be assumed as a non-edge-port.auto
indicates that detection of a port as Edge Port happens automatically"
::= { stpPortConfigurationEntry 8 }
stpPortOperFast OBJECT-TYPE
SYNTAX INTEGER {
edge(1),
non-edge(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of
stpPortFast and is set FALSE on reception
of a BPDU."
::= { stpPortConfigurationEntry 9 }
stpPortTCNFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause temporary loss of connectivity after changes in
a spanning trees active topology as a result of persistent
incorrectly learnt station location information. It is set by a
network administrator to prevent bridges external to a core region of
the network causing address flushing in that region, possibly because
those bridges are not under the full control of the administrator or
MAC_Operational for the attached LANs transitions frequently."
::= {stpPortConfigurationEntry 10}
stpPortFowardBPDU OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling forward BPDU."
REFERENCE
"IEEE 802.1D-2004"
::= { stpPortConfigurationEntry 11 }
stpPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { stpPortConfigurationEntry 12 }
stpPortHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second."
::= { stpPortConfigurationEntry 13 }
-- ----------------------------------------------------------------
-- The MST Configuration Identification
-- ----------------------------------------------------------------
mstConfiguration OBJECT IDENTIFIER ::= { l2STPGroup 3 }
mstiConfigurationName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration. By Default
Region Name will be equal to the Bridge Mac Address."
::= { mstConfiguration 1 }
mstiRevisionLevel OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { mstConfiguration 2 }
mstMstiConfigDigest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Configuration Digest value for this Region."
::= { mstConfiguration 3 }
-- -----------------------------------------------------------------
-- Future Mst VlanId to Instance Mapping Table : MSTI
-- -----------------------------------------------------------------
mstVlanMstiMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstVlanMstiMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each instance of MSTP.
This table maintains context ID as one more index to
support Multiple Instances."
::= { mstConfiguration 4 }
mstVlanMstiMappingEntry OBJECT-TYPE
SYNTAX MstVlanMstiMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceIndex }
::= { mstVlanMstiMappingTable 1 }
MstVlanMstiMappingEntry ::=
SEQUENCE {
mstInstanceIndex
Integer32,
mstSetVlanList
OCTET STRING,
mstResetVlanList
OCTET STRING,
mstInstanceVlanMapped
OCTET STRING,
mstInstanceVlanMapped2k
OCTET STRING,
mstInstanceVlanMapped3k
OCTET STRING,
mstInstanceVlanMapped4k
OCTET STRING
}
mstInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance."
::= { mstVlanMstiMappingEntry 1 }
mstSetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values."
::= { mstVlanMstiMappingEntry 2 }
mstResetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values."
::= { mstVlanMstiMappingEntry 3 }
mstInstanceVlanMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'."
::= { mstVlanMstiMappingEntry 4 }
mstInstanceVlanMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstVlanMstiMappingEntry 5 }
mstInstanceVlanMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstVlanMstiMappingEntry 6 }
mstInstanceVlanMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstVlanMstiMappingEntry 7 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
stpInstance OBJECT IDENTIFIER ::= { l2STPGroup 4 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table : CIST
-- -----------------------------------------------------------------
mstCistBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { stpInstance 1 }
mstCistStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
::= { stpInstance 2 }
mstCistPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
CIST Root in the configuration BPDUs transmitted."
::= { stpInstance 3 }
mstCistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { stpInstance 4 }
mstCistPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { stpInstance 5 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table : MSTI
-- -----------------------------------------------------------------
mstMstiBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Bridge Information specific to Spanning
Tree Instance. This table maintains context ID as one
more index to support Multiple Instances."
::= { stpInstance 6 }
mstMstiBridgeEntry OBJECT-TYPE
SYNTAX MstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Bridge Information."
INDEX { mstMstiInstanceIndex }
::= { mstMstiBridgeTable 1 }
MstMstiBridgeEntry ::= SEQUENCE {
mstMstiInstanceIndex
Integer32,
mstMstiBridgePriority
Integer32,
mstMstiStatus
INTEGER,
mstMstiPortDesignatedRoot
BridgeId,
mstMstiBridgeRegionalRoot
BridgeId,
mstMstiPortDesignatedBridge
BridgeId,
mstMstiTopChanges
Counter32
}
mstMstiInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Spanning Tree Instance to which the information belongs."
::= { mstMstiBridgeEntry 1 }
mstMstiBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { mstMstiBridgeEntry 2 }
mstMstiStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
::= { mstMstiBridgeEntry 3 }
mstMstiPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
MSTI Regional Root in the configuration BPDUs transmitted."
::= { mstMstiBridgeEntry 4 }
mstMstiBridgeRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MSTI Regional Root Identifier value for the Instance. This value
is used as the MSTI Regional Root Identifier parameter in all
Configuration Bridge PDUs originated by this node"
::= { mstMstiBridgeEntry 5 }
mstMstiPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { mstMstiBridgeEntry 6 }
mstMstiTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance."
::= { mstMstiBridgeEntry 7 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
stpInstancePortTable OBJECT IDENTIFIER ::= { l2STPGroup 5 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Port Table : CIST
-- -----------------------------------------------------------------
mstCistPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Common Spanning Tree Port
Information."
::= { stpInstancePortTable 1 }
mstCistPortEntry OBJECT-TYPE
SYNTAX MstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for
Common Spanning tree."
INDEX { mstCistPort }
::= { mstCistPortTable 1 }
MstCistPortEntry ::=
SEQUENCE {
mstCistPort
Integer32,
mstCistPortAdminPathCost
Integer32,
mstCistPortPathCost
Integer32,
mstCistPortPriority
Integer32,
mstCistPortState
INTEGER,
mstCistCurrentPortRole
INTEGER,
mstCistPortProtocolMigration
TruthValue
}
mstCistPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { mstCistPortEntry 1 }
mstCistPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstCistPortEntry 2 }
mstCistPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstCistPortEntry 3 }
mstCistPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { mstCistPortEntry 4 }
mstCistPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { mstCistPortEntry 5 }
mstCistCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { mstCistPortEntry 6 }
mstCistPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Protocol migration state of this Port.
writing TRUE(1) to this object forces this port to transmit protocol BPDU
Any other operation on this object has no effect."
::= { mstCistPortEntry 7 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Port Table : MSTI
-- -----------------------------------------------------------------
mstMstiPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Spanning Tree Instance Specific Port
Information."
::= { stpInstancePortTable 2 }
mstMstiPortEntry OBJECT-TYPE
SYNTAX MstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for each
and every spanning tree instance."
INDEX { mstMstiPort, mstMstiPortInstanceIndex }
::= { mstMstiPortTable 1 }
MstMstiPortEntry ::=
SEQUENCE {
mstMstiPort
Integer32,
mstMstiPortInstanceIndex
Integer32,
mstMstiPortAdminPathCost
Integer32,
mstMstiPortPathCost
Integer32,
mstMstiPortPriority
Integer32,
mstMstiPortState
INTEGER,
mstMstiCurrentPortRole
INTEGER
}
mstMstiPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { mstMstiPortEntry 1 }
mstMstiPortInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance."
::= { mstMstiPortEntry 2 }
mstMstiPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstMstiPortEntry 3 }
mstMstiPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstMstiPortEntry 4 }
mstMstiPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { mstMstiPortEntry 5 }
mstMstiPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Multiple
spanning tree protocol. Port which is Forwarding state
in one instance can be in Discarding (Blocking) state
in another instance."
::= { mstMstiPortEntry 6 }
mstMstiCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { mstMstiPortEntry 7 }
stpTraps OBJECT IDENTIFIER ::= { l2STPGroup 6 }
stpTrapsList OBJECT IDENTIFIER ::= { stpTraps 0 }
stpNewRootTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Generated whenever a new root bridge is selected in the topology "
::= { stpTrapsList 1 }
stpTopologyChgTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Generated when topology change is detected "
::= { stpTrapsList 2 }
-- SNTP MIB groups
sntpClockSettings OBJECT IDENTIFIER ::= { sysSNTPSettingGroup 1 }
sntpTimeZoneSettings OBJECT IDENTIFIER ::= { sysSNTPSettingGroup 2 }
sntpSNTPSettings OBJECT IDENTIFIER ::= { sysSNTPSettingGroup 3 }
-- ------------------------------------------------------------------
-- Clock Settings
-- ------------------------------------------------------------------
sntpTimeSeconds OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for setting the system time in seconds
from Epoch (00:00:00 UTC, January 1, 2009). Notice :
input value must larger than 284083276 (00:00:00 UTC,
January 1, 2009) and smaller than 1136073599 (23:59:59
UTC, December 31, 2035)."
::= { sntpClockSettings 1 }
-- ------------------------------------------------------------------
-- Time Zone Settings
-- ------------------------------------------------------------------
sntpSummerTimeState OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
recurring (2),
date (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the mode of the system to automatically
switch to Summer Time (Daylight Saving Time).
disable(1) - The Daylight Saving Time feature is disabled.
recurring(2) - The Daylight Saving Time feature is enabled.
The Summer Time should start and end on the specified
week day of the specified month.
format [weekofmonth-weekofday-month,HH:MM].
Example:- Third-Mon-Apr,17:30
date(3) - The Daylight Saving Time feature is enabled.
The Summer Time should start and end on the specified date
of the specified month.
format [dayofmonth-month,HH:MM].
Example:- 01-Apr,17:30.
"
::= { sntpTimeZoneSettings 1 }
sntpGMTMinutes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)"
::= { sntpTimeZoneSettings 2 }
sntpSummerTimeStart OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates when the Summer Time starts.
This value is always interpreted within the context of a
sntpSummerTimeState value."
::= { sntpTimeZoneSettings 3 }
sntpSummerTimeEnd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates when the Summer Time ends.
This value is always interpreted within the context of a
sntpSummerTimeState value."
::= { sntpTimeZoneSettings 4 }
sntpSummerTimeOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object indicates number of minutes to add
or to subtract during Summer Time. This object is not meaningful
when sntpSummerTimeState object is 'disable'."
::= { sntpTimeZoneSettings 5 }
-- Recurring Setting
-- sntpRecFromWeekOfMon OBJECT-TYPE
-- SYNTAX INTEGER {
-- first(1),
-- second (2),
-- third (3),
-- fourth (4),
-- last (5)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object is for Week of the Month."
-- ::= { sntpTimeZoneSettings 3 }
-- sntpRecFromDayOfWeek OBJECT-TYPE
-- SYNTAX INTEGER {
-- sun (1),
-- mon (2),
-- tue (3),
-- wed (4),
-- thurs (5),
-- fri (6),
-- sat (7)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object is for Week of the Month."
-- ::= { sntpTimeZoneSettings 4 }
-- sntpRecFromTime OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (12))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " Daylight saving time (DST) is a system of setting clocks ahead so
-- that both sunrise and sunset occur at a later hour. The effect is
-- additional daylight in the evening. Many countries observe DST,
-- although most have their own rules and regulations for when it begins
-- and ends. The dates of DST may change from year to year. The Valid
-- format [dayofmonth-month,HH:MM].
-- Example:- 01-Apr,17:30"
-- ::= { sntpTimeZoneSettings 5 }
-- sntpRecToWeekOfMon OBJECT-TYPE
-- SYNTAX INTEGER {
-- first(1),
-- second (2),
-- third (3),
-- fourth (4),
-- last (5)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object is for Week of the Month."
-- ::= { sntpTimeZoneSettings 6 }
-- sntpRecToDayOfWeek OBJECT-TYPE
-- SYNTAX INTEGER {
-- sun (1),
-- mon (2),
-- tue (3),
-- wed (4),
-- thurs (5),
-- fri (6),
-- sat (7)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object is for Week of the Month."
-- ::= { sntpTimeZoneSettings 7 }
-- sntpRecToTime OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (12))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " Daylight saving time (DST) is a system of setting clocks ahead so
-- that both sunrise and sunset occur at a later hour. The effect is
-- additional daylight in the evening. Many countries observe DST,
-- although most have their own rules and regulations for when it begins
-- and ends. The dates of DST may change from year to year. The Valid
-- format [dayofmonth-month,HH:MM].
-- Example:- 01-Apr,17:30"
-- ::= { sntpTimeZoneSettings 8 }
-- sntpRecOffset OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object is for Daylight Saving Time Offset
-- In (30/60/90/120) Minutes."
-- ::= { sntpTimeZoneSettings 9 }
-- Date Setting
-- sntpDSTStartYear OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "From Year"
-- ::= { sntpTimeZoneSettings 10 }
-- sntpDSTStartTime OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (12))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " Daylight saving time (DST) is a system of setting clocks ahead so
-- that both sunrise and sunset occur at a later hour. The effect is
-- additional daylight in the evening. Many countries observe DST,
-- although most have their own rules and regulations for when it begins
-- and ends. The dates of DST may change from year to year. The Valid
-- format [dayofmonth-month,HH:MM].
-- Example:- 01-Apr,17:30"
-- ::= { sntpTimeZoneSettings 11 }
-- sntpDSTEndYear OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "From Year"
-- ::= { sntpTimeZoneSettings 12 }
-- sntpDSTEndTime OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (12))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " Daylight saving time (DST) is a system of setting clocks ahead so
-- that both sunrise and sunset occur at a later hour. The effect is
-- additional daylight in the evening. Many countries observe DST,
-- although most have their own rules and regulations for when it begins
-- and ends. The dates of DST may change from year to year. The Valid
-- format [dayofmonth-month,HH:MM].
-- Example:- 01-Apr,17:30"
-- ::= { sntpTimeZoneSettings 13 }
-- sntpDSTOffset OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object is for Daylight Saving Time Offset
-- In (30/60/90/120) Minutes."
-- ::= { sntpTimeZoneSettings 14 }
-- ------------------------------------------------------------------
-- SNTP Settings
-- ------------------------------------------------------------------
sntpGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable SNTP function in the system."
::= { sntpSNTPSettings 1 }
sntpPollInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP Poll Interval In Seconds (30-99999) "
::= { sntpSNTPSettings 2 }
-- SNTP Server Setting
sntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains configured SNTP/NTP servers in the system."
::= { sntpSNTPSettings 3 }
sntpServerEntry OBJECT-TYPE
SYNTAX SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in the table contains necessary information to
send SNTP request to the servers."
INDEX { sntpServerAddrType, sntpServerAddr }
::= { sntpServerTable 1 }
SntpServerEntry ::= SEQUENCE {
sntpServerAddrType INTEGER,
sntpServerAddr InetAddress,
sntpServerStratum INTEGER,
sntpServerVersion INTEGER,
sntpServerLastReceive TimeTicks,
sntpServerSynced TruthValue,
sntpServerRowStatus RowStatus
}
sntpServerAddrType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type ipv4 or ipv6."
DEFVAL { ipv4 }
::= { sntpServerEntry 1 }
sntpServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The unicast IPv4/IPv6 server address in the Unicast Addressing mode "
::= { sntpServerEntry 2 }
sntpServerStratum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"stratum levels define the distance from the reference clock."
::= { sntpServerEntry 3 }
sntpServerVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sntp server version."
::= { sntpServerEntry 4 }
sntpServerLastReceive OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this server was synced."
::= { sntpServerEntry 5 }
sntpServerSynced OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the corresponding server is the
current synced server.
"
::= { sntpServerEntry 6 }
sntpServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The activation of a row adds server entry. The destruction of a row
removes server entry"
::= { sntpServerEntry 7 }
-- ------------------------------------------------------------------
-- The Time Range Setting
-- ------------------------------------------------------------------
timeRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF TimeRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure time Range in the system."
::= { sysTimeRangeGroup 1 }
timeRangeEntry OBJECT-TYPE
SYNTAX TimeRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A schedule entry to configure time Range in the system."
INDEX { timeRangeName , timeRangeIndex}
::= { timeRangeTable 1 }
TimeRangeEntry ::=
SEQUENCE {
timeRangeName DisplayString,
timeRangeIndex Integer32,
timeRangeStartHour Integer32,
timeRangeStartMinute Integer32,
timeRangeEndHour Integer32,
timeRangeEndMinute Integer32,
timeRangeWeekday BITS,
timeRangeRowStatus RowStatus
}
timeRangeName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Schedule name associated with the Schedule entry (e.g., `abc, bbb')."
::= { timeRangeEntry 1}
timeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Time Range identifier. The maximum number of Schedule entry is
the number of ports supported PoE function.
The value must be between 1 and 52."
::= { timeRangeEntry 2 }
timeRangeStartHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start hour of the Schedule entry.
The value must be from 0 to 23."
::= { timeRangeEntry 3 }
timeRangeStartMinute OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start minute of the Schedule entry.
The value must be from 0 to 59."
::= { timeRangeEntry 4 }
timeRangeEndHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End hour of the Schedule entry.
The value must be from 0 to 23."
::= { timeRangeEntry 5 }
timeRangeEndMinute OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End minute of the Schedule entry.
The value must be from 0 to 59."
::= { timeRangeEntry 6 }
timeRangeWeekday OBJECT-TYPE
SYNTAX BITS {
saturday(0),
friday(1),
thursday(2),
wednesday(3),
tuesday(4),
monday(5),
sunday(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disble scheduling weekday list."
::= { timeRangeEntry 7 }
timeRangeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of an entry in the Time Range Information Table. Only a subset
of the rowstatus variables (active, notinservice, createAndWait, destroy)
are available."
::= { timeRangeEntry 8 }
-- ----------------------------------------------------------------
-- The l3IPIF group
-- ----------------------------------------------------------------
multiIfMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultiIfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex."
::= { l3IpMgmtGroup 1 }
multiIfMainEntry OBJECT-TYPE
SYNTAX MultiIfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { multiIfMainIndex }
::= { multiIfMainTable 1 }
MultiIfMainEntry ::=
SEQUENCE {
multiIfMainIndex InterfaceIndex,
multiIfMainAdminStatus INTEGER,
multiIfMainOperStatus INTEGER,
multiIfIpBindVlanId Integer32,
multiL3VlanIfName DisplayString,
multiIfMainRowStatus RowStatus
}
multiIfMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { multiIfMainEntry 1 }
multiIfMainAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of the interface. This object
can be set only when the ifMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.
When a managed system initializes, all
interfaces start with ifMainAdminStatus in the
down(2) state, it's a default state also. As a result
of either explicit management action or per
configuration information retained by the managed
system, ifMainAdminStatus is then changed to
the up (1) state (or remains in the
down(2) state)."
DEFVAL { down }
::= { multiIfMainEntry 2 }
multiIfMainOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3), -- in some test mode
unknown(4), -- status can not be
-- determined for
-- some reason.
dormant(5),
notPresent(6), -- some component is
-- missing
lowerLayerDown(7) -- down due to state
-- of lower-layer
-- interface(s).
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The testing (3) state indicates that no operational
packets can be passed - this state is not supported
currently.
If ifMainAdminStatus is down (2)
then ifMainOperStatus would be down (2). If
ifMainAdminStatus is changed to up (1) then
ifMainOperStatus should change to up (1) if the
interface is ready to transmit and receive
work traffic; it should change to dormant (5)
the interface is waiting for external actions
(such as a serial line waiting for an incoming
connection); it should change to lowerLayerDown(7)
state if it cannot be made up as the interface sub-layer
below it is down; it should remain in the down (2) state
if and only if there is a fault that prevents it
from going to the up (1) state; it should remain in
the notPresent (6) state if the interface has
missing (typically, hardware) components.
The status unknown(4) is shown when it is not possible
to determine the exact status of the interface - e.g.
the interface sub-layer is performing negotiations -
during this period the interface is not up but at the
same time, it is not a fault condition and hence it
cannot be shown as down - in such periods the status
is shown as unknown.
This object has the semantics of the ifOperStatus of the
standard ifTable."
::= { multiIfMainEntry 3 }
multiIfIpBindVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the IP Interface over the Vlan Interface which it vlan id is the configure Vlan id."
::= { multiIfMainEntry 4 }
multiL3VlanIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the L3 Vlan Interface Name."
::= { multiIfMainEntry 5 }
multiIfMainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A RowStatus variable for addition, deletion and in-activation
of the interfaces. Specification of the object is mandatory
for all interfaces.
When the status is active, the interface is created and
ready to use in the respective protocol modules.
When the status is notInService, the interface has not been
registered with the respective protocol modules and as such
those modules are not aware of the existence of the interface
- creation is hence, incomplete. Setting an active interface
to notInService results in de-registration/deletion of the
interface from the respective protocol modules and all the
configurations associated with that interface in those modules
may be lost.
Deletion of an interface, may affect the status of other
interfaces which are layered above or below it in the Interface
Stack (ifStackTable) and may result in other interfaces being
made notReady or notInService."
::= { multiIfMainEntry 6 }
-- ifIpTable
-- This table is used for the management of the interfaces in the
-- system which are registered with IP.
multiIfIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultiIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system which
are registered with IP.
This table contains objects which are applicable for the
management of IP over the network interfaces
in the system.
This table is a extension to the ifMainTable.
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
Entries are created automatically in this table for
any interface sub-layer which is layer below IP using
the ifStackTable. Similarly, entries are deleted from
this table when the interface's layering below IP is
removed."
::= { l3IpMgmtGroup 2 }
multiIfIpEntry OBJECT-TYPE
SYNTAX MultiIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface over which IP is operating."
INDEX { multiIfIpIndex }
::= { multiIfIpTable 1 }
MultiIfIpEntry ::=
SEQUENCE {
multiIfIpIndex InterfaceIndex,
multiIfIpAddrAllocMethod INTEGER,
multiIfIpAddr IpAddress,
multiIfIpSubnetMask IpAddress
}
multiIfIpIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { multiIfIpEntry 1 }
multiIfIpAddrAllocMethod OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
dynamic(2)
} -- Currently only
-- these method possible.
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mechanism to be used for allocation of IP
address for this interface.
If the method specified is manual and the IP
address is not provided (then the interface
would be treated as a un-numbered interface.
The dynamic(2) option takes an IP
address dynamically from the available
server (dhcp/bootp/rarp) .
"
DEFVAL { manual }
::= { multiIfIpEntry 2 }
multiIfIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP address given to this
interface. The specification of this object is
mandatory for all network interfaces (Ethernet,
FR VC, IPoA interface, PPP link - not under MP,
MP interface and X.25 VC). If the interface is
not a network interface then the default value
of 0.0.0.0 is assigned and the interface is
treated as a un-numbered interface by IP."
DEFVAL { '00000000'H }
::= { multiIfIpEntry 3 }
multiIfIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask for this
interface. The value should be specified only
for network interfaces and any valid VLSM is
accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { multiIfIpEntry 4 }
-- RTM Common Route Table
-- The RTM Common Route Table can be used to view all the
-- routes except local route present in the system.
multiRouteConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultiRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's IP Routing table. This table can be used to
view all user configuration routes present in the system"
::= { l3IpMgmtGroup 3 }
multiRouteConfigEntry OBJECT-TYPE
SYNTAX MultiRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destina-
tion, under a particular policy."
INDEX {
multiRouteConfigDest,
multiRouteConfigMask,
multiRouteConfigNextHop
}
::= { multiRouteConfigTable 1 }
MultiRouteConfigEntry ::= SEQUENCE
{
multiRouteConfigDest IpAddress,
multiRouteConfigMask IpAddress,
multiRouteConfigNextHop IpAddress,
multiRouteConfigIfIndex Integer32,
multiRouteConfigStatus RowStatus,
multiRouteConfigBackupState INTEGER
}
multiRouteConfigDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
RouteMask object is not equal to x."
::= { multiRouteConfigEntry 1 }
multiRouteConfigMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the RouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the RouteMask by reference to the IP Ad-
dress Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
RouteDest object is not equal to fsRoute-
Dest."
::= { multiRouteConfigEntry 2 }
multiRouteConfigNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0."
::= { multiRouteConfigEntry 3 }
multiRouteConfigIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.
0 indicate invalid interface"
::= { multiRouteConfigEntry 4 }
multiRouteConfigStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { multiRouteConfigEntry 5 }
multiRouteConfigBackupState OBJECT-TYPE
SYNTAX INTEGER {
unassigned(0),
primary(1),
backup(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Backup route support only for static route.
The object indicates whether the static route as
primary route or backup route."
::= { multiRouteConfigEntry 6 }
--Active route table
multiRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultiRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's IP Routing table. This table can be used to
view all active routes present in the system"
::= { l3IpMgmtGroup 4 }
multiRouteEntry OBJECT-TYPE
SYNTAX MultiRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destina-
tion, under a particular policy."
INDEX {
multiRouteDest,
multiRouteMask,
multiRouteNextHop
}
::= { multiRouteTable 1 }
MultiRouteEntry ::= SEQUENCE
{
multiRouteDest IpAddress,
multiRouteMask IpAddress,
multiRouteNextHop IpAddress,
multiRouteIfIndex Integer32,
multiRouteProto INTEGER,
multiRouteMetric Integer32,
multiRoutePreference Integer32
}
multiRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
RouteMask object is not equal to x."
::= { multiRouteEntry 1 }
multiRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the RouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the RouteMask by reference to the IP Ad-
dress Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
RouteDest object is not equal to fsRoute-
Dest."
::= { multiRouteEntry 2 }
multiRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0."
::= { multiRouteEntry 3 }
multiRouteIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.
0 indicate invalid interface"
::= { multiRouteEntry 4 }
multiRouteProto OBJECT-TYPE
SYNTAX INTEGER {
other(1),
local(2),
netmgmt(3),
icmp(4),
egp(5),
ggp(6),
hello(7),
rip(8),
isIs(9),
esIs(10),
ciscoIgrp(11),
bbnSpfIgp(12),
ospf(13),
bgp(14),
idpr(15),
ciscoEigrp(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this route was
learned. Inclusion of values for gateway rout-
ing protocols is not intended to imply that
hosts should support those protocols."
::= { multiRouteEntry 5 }
multiRouteMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
multiRouteProto value. "
::= { multiRouteEntry 6}
multiRoutePreference OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference for the method by which this route was learned.
This value will be used by the forwarding algorithm to choose
the best route.."
::= { multiRouteEntry 7}
-- RTM Common Route Table END
-- IPv6 Interface Table
-- The IPv6 Interface table defines the logical interfaces on which
-- IPv6 protocol is running. These include LAN interfaces, Point-to-
-- Point interfaces, IPv6 over IPv4 Tunnel interfaces and NBMA
-- interfaces.
-- Entries of this table are created/deleted from SNMP.
multiIpv6IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultiIpv6IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Interface table contains information on the
entity's internetwork-layer interfaces on which IPv6.
protocol is enabled. An IPv6 interface constitutes a logical
network layer attachment to the layer immediately below
IPv6. These include LAN interfaces, Point-to-Point interfaces,
NBMA interfaces and IPv6 over IPv4 Tunnel interfaces."
::= { l3IpMgmtGroup 5 }
multiIpv6IfEntry OBJECT-TYPE
SYNTAX MultiIpv6IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An interface entry containing objects about a particular
IPv6 interface. The entry is created or deleted from SNMP."
INDEX { multiIpv6IfIndex }
::= { multiIpv6IfTable 1 }
MultiIpv6IfEntry ::= SEQUENCE {
multiIpv6IfIndex
InterfaceIndex,
multiIpv6IfAdminStatus
INTEGER,
multiIpv6IfOperStatus
INTEGER,
multiIpv6IfRetransmitTime
Integer32
}
multiIpv6IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value identifying the particular IPv6
interface."
::= { multiIpv6IfEntry 1 }
multiIpv6IfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether IPv6 is enabled/disabled on this interface.
When lower layer indicates the creation of the interface, an
entry will be create in IPv6 interfac table with
fsipv6IfAdminStatus in down(2) state. Either on setting this
object as up(1) or configuring any IPv6 address over this
interface, will set the fsipv6IfAdminStatus to up(1) state.
If this object is set to down(2), and if no IPv6 address is
configured for this interface, fsipv6IfAdminStatus goes
down(2). Else the Status remains up(1), as long as the
IPv6 address are present. Once these addresses are removed,
the status goes to down(2)."
::= { multiIpv6IfEntry 2 }
multiIpv6IfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
stale(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of interface. It is up(1) if the
fsipv6IfAdminStatus is 'up' and the layer below the network
layer is also operational. Otherwise it is down(2)."
::= { multiIpv6IfEntry 3 }
multiIpv6IfRetransmitTime OBJECT-TYPE
SYNTAX Integer32 (1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The retransmit time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds between
retransmitted Neighbor Solicitations and is used during
address resolution, unreachability detection and
duplicate address detection."
DEFVAL { 1 }
::= { multiIpv6IfEntry 4}
-- IPv6 Address Table
-- The IPv6 address table contains this entity's IPv6
-- addressing information.
-- Entries are created/deleted from SNMP.
multiIpv6AddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultiIpv6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing entity's IPv6 addressing information."
::= { l3IpMgmtGroup 6 }
multiIpv6AddrEntry OBJECT-TYPE
SYNTAX MultiIpv6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in the IPv6 Address Table which defines a
unicast, anycast or link-local address on an IPv6 interface."
INDEX {multiIpv6AddrIndex,
multiIpv6AddrAddress,
multiIpv6AddrPrefixLen
}
::= { multiIpv6AddrTable 1 }
MultiIpv6AddrEntry ::=
SEQUENCE {
multiIpv6AddrIndex
InterfaceIndex,
multiIpv6AddrAddress
Ipv6Address,
multiIpv6AddrPrefixLen
Integer32,
multiIpv6AddrAdminStatus
RowStatus,
multiIpv6AddrType
INTEGER,
multiIpv6AddrCfgMethod
INTEGER,
multiIpv6AddrOperStatus
INTEGER
}
multiIpv6AddrIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value which uniquely identifies the IPv6
interface on which this IPv6 address entry exists.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of fsipv6IfIndex."
::= { multiIpv6AddrEntry 1 }
multiIpv6AddrAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address to which this entry's addressing
information pertains."
::= { multiIpv6AddrEntry 2 }
multiIpv6AddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the prefix (in bits) associated with
the IPv6 address of this entry. For a link-local address,
the prefix is always start with '0xfe80' and the prefix
length is 128 bits."
::= { multiIpv6AddrEntry 3 }
multiIpv6AddrAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the desired status of the address. Also a creation
of an address can trigger IPv6 to be enabled over the
interface. Similarly deletion of all the address may trigger
IPv6 to be disabled on the interface. NotInService value is
not supported."
::= { multiIpv6AddrEntry 4 }
multiIpv6AddrType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2),
linklocal(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the address is a unicast, anycast or
link-local address. Syntactically there is no difference
between a unicast address and a anycast address while a
link-local address has the prefix '0xfe80'. This
object can be modified only if fsipv6AddrOperStatus is
down."
::= { multiIpv6AddrEntry 5 }
multiIpv6AddrCfgMethod OBJECT-TYPE
SYNTAX INTEGER {
static(1),
stateless(2),
stateful(3),
dynamic(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the configuration method of the address.
static(1) indicates that this address is configured by user;
stateless(2) indicates that this address is auto configured stateless;
stateful(3) indicates that this address is auto configured when DHCPv6 server reply
"
::= { multiIpv6AddrEntry 6 }
multiIpv6AddrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
tentative(1),
complete(2),
down(3),
failed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational status of the address. A
status of failed(4) indicates that a duplicate address has
been detected on this IPv6 interface. On interfaces on
which Duplicate Address Detection is not performed, this
object will take values only complete(2) and down(3).
"
::= { multiIpv6AddrEntry 7 }
-- ----------------------------------------------------------------
-- The Neighbor Setting group
-- ----------------------------------------------------------------
multiIPv6neighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultiIPV6NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Neighbor Cache Table."
::= { l3IpMgmtGroup 7 }
multiIpv6NeighborEntry OBJECT-TYPE
SYNTAX MultiIPV6NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Neighbor cache entry containing the ifindex and ipv6 addr."
--INDEX { ipv6NeighborIndex, ipv6NeighborAddr, ipv6NeighborMacAddr}
INDEX { multiIpv6NeighborIndex, multiIpv6NeighborAddr}
::= { multiIPv6neighborTable 1 }
MultiIPV6NeighborEntry ::= SEQUENCE {
multiIpv6NeighborIndex INTEGER,
multiIpv6NeighborAddr Ipv6Address,
multiIpv6NeighborMacAddr MacAddress,
multiIpv6NeighborType INTEGER,
multiIpv6NeighborCacheState INTEGER,
-- multiIpv6NeighborActiveStatus INTEGER,
multiIpv6NeighborRowStatus RowStatus
}
multiIpv6NeighborIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the Neighbor entry."
::= { multiIpv6NeighborEntry 1 }
multiIpv6NeighborAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Allows the entry of an IP address that will be a Neighbor entry into
the Neighbor Cache Table."
::= { multiIpv6NeighborEntry 2 }
multiIpv6NeighborMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address associated of the Neighbor entry."
::= { multiIpv6NeighborEntry 3 }
multiIpv6NeighborType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type associated of the Neighbor entry."
::= { multiIpv6NeighborEntry 4 }
multiIpv6NeighborCacheState OBJECT-TYPE
SYNTAX INTEGER {
static(1),
reachable(2),
incomplete(3),
stale(4),
delay(5),
probe(6),
notinservice(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type associated of the Neighbor entry."
::= { multiIpv6NeighborEntry 5 }
-- ipv6NeighborActiveStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- active(1),
-- inactive(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The active status of the Neighbor entry."
-- ::= { multiIpv6NeighborEntry 6 }
multiIpv6NeighborRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the Neighbor Cache Table. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available."
::= { multiIpv6NeighborEntry 6 }
-- IPv6 Routing Table
-- The IPv6 static routing table contains an entry for each
-- valid statoc /Default Ipv6 unicast routes that can be used for packet
-- forwarding.
multiIpv6StaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultiIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains dynamic routes that are learnt
through dynamic routing protocol as well as local routes
derived from configured address prefixes and statically
configured routes."
::= { l3IpMgmtGroup 8 }
multiIpv6StaticRouteEntry OBJECT-TYPE
SYNTAX MultiIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the IPv6 Static Routing Table. An entry can be created
by means of the routing protocol, derived from configured
address prefixes as well as statically configured. "
INDEX { multiIpv6StaticRouteDest,
multiIpv6StaticRoutePfxLength,
multiIpv6StaticRouteNextHop
}
::= { multiIpv6StaticRouteTable 1 }
MultiIpv6StaticRouteEntry ::=
SEQUENCE {
multiIpv6StaticRouteDest
Ipv6Address,
multiIpv6StaticRoutePfxLength
Integer32,
multiIpv6StaticRouteNextHop
Ipv6Address,
multiIpv6StaticRouteIfIndex
InterfaceIndex,
multiIpv6StaticRouteAdminStatus
RowStatus,
multiIpv6StaticRouteBackupState
INTEGER,
multiIpv6StaticRouteSelected
INTEGER,
multiIpv6StaticRouteValidState
INTEGER
}
multiIpv6StaticRouteDest OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IPv6 address of this route.
This object will not take a Link-Local or Multicast address
value."
::= { multiIpv6StaticRouteEntry 1 }
multiIpv6StaticRoutePfxLength OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the prefix length of the destination
address."
::= { multiIpv6StaticRouteEntry 2 }
multiIpv6StaticRouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Next hop IPv6 Address for this route. For direct routes
it has the value ::0."
::= { multiIpv6StaticRouteEntry 3 }
multiIpv6StaticRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index value which uniquely identifies the interface
through which the next hop of this route should be reached.
The interface identified by a particular value of this index
is the same interface as identified by the same value of
ipv6IfIndex."
::= { multiIpv6StaticRouteEntry 4 }
multiIpv6StaticRouteAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrative Status of the route. This object is used
to create or delete the route entry. The ipv6RouteIfIndex
and backup state needs to be set, before the route entry
is made active. CreateAndGo is not supported."
::= { multiIpv6StaticRouteEntry 5 }
multiIpv6StaticRouteBackupState OBJECT-TYPE
SYNTAX INTEGER {
unassigned(0),
primary(1),
backup(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Backup route support only for static route.
The object indicates whether the static route as
primary route or backup route"
::= { multiIpv6StaticRouteEntry 6}
multiIpv6StaticRouteSelected OBJECT-TYPE
SYNTAX INTEGER {
selected(1),
unselected(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the primary or backup route which is selected."
::= { multiIpv6StaticRouteEntry 7}
multiIpv6StaticRouteValidState OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
valid(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates route is alive whether or not."
::= { multiIpv6StaticRouteEntry 8}
-- This table contains static and dynamic routes as well as routes
-- to directly connected networks which are derived from the
-- configured address prefixes. Thus entries exist in this table
-- even if RIPng protocol is not running.
-- Entries created/deleted from SNMP, dynamically through RIPng
-- protocol or derived from configured address prefixes.
multiIpv6RouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultiIpv6RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains dynamic routes that are learnt
through dynamic routing protocol as well as local routes
derived from configured address prefixes and statically
configured routes."
::= { l3IpMgmtGroup 9 }
multiIpv6RouteEntry OBJECT-TYPE
SYNTAX MultiIpv6RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the IPv6 Routing Table. An entry can be created
by means of the routing protocol, derived from configured
address prefixes as well as statically configured. There
can be a static route as well as dynamic routes with the
same destination and prefix length."
INDEX { multiIpv6RouteDest,
multiIpv6RoutePfxLength,
multiIpv6RouteProtocol,
multiIpv6RouteNextHop
}
::= { multiIpv6RouteTable 1 }
MultiIpv6RouteEntry ::=
SEQUENCE {
multiIpv6RouteDest
Ipv6Address,
multiIpv6RoutePfxLength
Integer32,
multiIpv6RouteProtocol
INTEGER,
multiIpv6RouteNextHop
Ipv6Address,
multiIpv6RouteIfIndex
InterfaceIndex,
multiIpv6RouteMetric
Unsigned32,
multiIpv6RoutePreference
Unsigned32
}
multiIpv6RouteDest OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IPv6 address of this route.
This object will not take a Link-Local or Multicast address
value."
::= { multiIpv6RouteEntry 1 }
multiIpv6RoutePfxLength OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the prefix length of the destination
address."
::= { multiIpv6RouteEntry 2 }
multiIpv6RouteProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
local(2), -- non-protocol information,
-- e.g., manually configured
-- entries
netmgmt(3), -- static route
ndisc(4) -- e.g., Redirect
-- the following are all
-- dynamic routing protocols
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this route was
learned."
::= { multiIpv6RouteEntry 3 }
multiIpv6RouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Next hop IPv6 Address for this route. For direct routes
it has the value ::0."
::= { multiIpv6RouteEntry 4 }
multiIpv6RouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value which uniquely identifies the interface
through which the next hop of this route should be reached.
The interface identified by a particular value of this index
is the same interface as identified by the same value of
ipv6IfIndex."
::= { multiIpv6RouteEntry 5 }
multiIpv6RouteMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing metric associated with this route "
::= { multiIpv6RouteEntry 6}
multiIpv6RoutePreference OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference for the method by which this route was learned.
This value will be used by the forwarding algorithm to choose
the best route.."
::= { multiIpv6RouteEntry 7}
-------------------Dhcp Client Option Table Expansion ------------------
dhcpClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The dhcp options which are to be added to packets sent
will be added as entries in this table.
While sending out discover message, the options entries
which are avilable in this table will be added with
discover message."
::= { l3IpMgmtGroup 10 }
dhcpClientEntry OBJECT-TYPE
SYNTAX DhcpClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing dhcp options which will be added to the
packets from client to server."
INDEX { dhcpClientIfIndex }
::= { dhcpClientTable 1 }
DhcpClientEntry ::=
SEQUENCE {
dhcpClientIfIndex InterfaceIndex,
dhcpClientClientIdIfIdx InterfaceIndex,
dhcpClientClassIdType INTEGER,
dhcpClientClassId OCTET STRING,
dhcpClientHostName DisplayString ,
dhcpClientLeaseDay Integer32,
dhcpClientLeaseHour Unsigned32,
dhcpClientLeaseMinute Unsigned32
}
dhcpClientIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique identifier for each interface.
This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { dhcpClientEntry 1 }
dhcpClientClientIdIfIdx OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates ifIndex of the VLAN interface whose
hexadecimal MAC address will be used as the client ID to be
sent with the DISCOVER message
0 indicates that preferred client id is unspecified
"
::= { dhcpClientEntry 2 }
dhcpClientClassIdType OBJECT-TYPE
SYNTAX INTEGER {
ascii(1),
hex(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the type of class id which is defined by
dhcpClientClassIdValue.
The value means :
ascii(1)- The dhcpClientClassIdValue is ascii string.
hex(2) - The dhcpClientClassIdValue is a string of HEX
number.
"
::= { dhcpClientEntry 3 }
dhcpClientClassId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the value of vendor class identifier
(option 60) to be sent with the DHCP DISCOVER message.
An dhcpClientClassIdValue value is always interpreted
within the context of an dhcpClientClassIdType value.
If dhcpClientClassIdType is 'hex', this object is a HEX
string value, which is restricted to hexadecimal character set.
length is equal to 0 indicates that preferred class id is unspecified"
::= { dhcpClientEntry 4 }
dhcpClientHostName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the host name. The host name must start with
a letter, end with a letter or digit, and only with interior
characters letters, digits, and hyphens.
length is equal to 0 indicates that preferred host name is unspecified
"
::= { dhcpClientEntry 5 }
dhcpClientLeaseDay OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the number of days for the duration of
preferred lease time. Value of -1 indicates that preferred lease
time is unspecified.
This value is checked when an IP address is acquired from
a DHCP server. "
DEFVAL { -1 }
::= { dhcpClientEntry 6 }
dhcpClientLeaseHour OBJECT-TYPE
SYNTAX Unsigned32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the number of hours for the duration of preferred
lease time."
DEFVAL { 0 }
::= { dhcpClientEntry 7 }
dhcpClientLeaseMinute OBJECT-TYPE
SYNTAX Unsigned32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the number of minutes for the duration of preferred
lease time."
DEFVAL { 0 }
::= { dhcpClientEntry 8 }
--dhcpclienttable END
-- dhcp6Client BEGIN
dhcp6ClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcp6ClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains all DHCPv6 client entries which consists of
DHCPv6 client related configuration. An entry is created to set a
value different from the default on an interface. "
::= { l3IpMgmtGroup 11 }
dhcp6ClientEntry OBJECT-TYPE
SYNTAX Dhcp6ClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the dhcp6ClientTable."
INDEX { dhcp6ClientIndex }
::= { dhcp6ClientTable 1 }
Dhcp6ClientEntry ::= SEQUENCE {
dhcp6ClientIndex InterfaceIndex,
dhcp6ClientEnabled INTEGER,
dhcp6ClientRapidCommit INTEGER
}
dhcp6ClientIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces."
::= { dhcp6ClientEntry 1 }
dhcp6ClientEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether acquires an IPv6 address on an
interface from the DHCPv6 server."
DEFVAL { disabled }
::= { dhcp6ClientEntry 2 }
dhcp6ClientRapidCommit OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the two-message
exchange for address allocation and other configuration is used.
When dhcp6ClientEnabled is 'false', dhcp6ClientRapidCommit
cannot be set to 'true'."
DEFVAL { disabled }
::= { dhcp6ClientEntry 3 }
-- dhcp6Client END
dhcpRetryCount OBJECT-TYPE
SYNTAX Integer32 (5..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Retry count of dhcp."
::= { l3IpMgmtGroup 12 }
-- -------------------------------------------------------------
-- Loopback Detection Function
-- -------------------------------------------------------------
lbdGlobalSettings OBJECT IDENTIFIER ::= { l2LBDGroup 1 }
lbdPortSettings OBJECT IDENTIFIER ::= { l2LBDGroup 2 }
lbdVlanSettings OBJECT IDENTIFIER ::= { l2LBDGroup 3 }
lbdTraps OBJECT IDENTIFIER ::= { l2LBDGroup 4 }
-- -------------------------------------------------------------
-- Loopback Detection Global Settings
-- -------------------------------------------------------------
lbdState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Loopback detection function.
The Loopback Detection function is used to detect the loop created
by a specific port while Spanning Tree Protocol (STP) is not
enabled in the network, especially when the down links are hubs
or unmanaged switchs.The Switch will automatically shutdown the
port and sends a log to the administrator."
DEFVAL { disabled }
::= { lbdGlobalSettings 1 }
lbdMode OBJECT-TYPE
SYNTAX INTEGER {
port(1),
vlan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loopback detection function mode."
DEFVAL { port }
::= { lbdGlobalSettings 2 }
lbdEnabledVLANIDList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enabled VLAN ID List ."
::= { lbdGlobalSettings 3 }
lbdInterval OBJECT-TYPE
SYNTAX Integer32 (1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a Loop detection Interval between 1 and 32767 seconds.
The default is 2 seconds.
This time interval to be used at counting time seconds to
resend the CTP packet automatically."
DEFVAL { 2 }
::= { lbdGlobalSettings 4 }
lbdTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Loopback detection trap
function."
DEFVAL { disabled }
::= { lbdGlobalSettings 5 }
lbdAction OBJECT-TYPE
SYNTAX INTEGER {
shutdown(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loopback detection function action."
DEFVAL { shutdown }
::= { lbdGlobalSettings 6 }
-- -------------------------------------------------------------
-- Loopback Detection Port Settings
-- -------------------------------------------------------------
lbdportTable OBJECT-TYPE
SYNTAX SEQUENCE OF LbdportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control Loopback detection features either for
the entire switch or for each interface in the switch."
::= { lbdPortSettings 1 }
lbdportEntry OBJECT-TYPE
SYNTAX LbdportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { lbdportIndex }
::= { lbdportTable 1 }
LbdportEntry ::=
SEQUENCE {
lbdportIndex Integer32,
lbdportState INTEGER,
lbdportResult INTEGER,
lbdportTimeLeft SnmpAdminString
}
lbdportIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the port for which the configuration
in this entry applies."
::= { lbdportEntry 1 }
lbdportState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to per port enable or disable the loopback detection
function. Default is disabled."
DEFVAL { disabled }
::= { lbdportEntry 2 }
lbdportResult OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The loop Result for this port."
::= { lbdportEntry 3}
lbdportTimeLeft OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loopback Detection Port Settings Time Left (sec)."
::= { lbdportEntry 4 }
-- -------------------------------------------------------------
-- Loopback Detection VLAN Port Settings
-- -------------------------------------------------------------
lbdVlanLoopTable OBJECT-TYPE
SYNTAX SEQUENCE OF LbdVlanLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to display Loopback detection features by vlan
mode."
::= { lbdVlanSettings 1 }
lbdVlanLoopEntry OBJECT-TYPE
SYNTAX LbdVlanLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { lbdVlanLoopIndex }
::= { lbdVlanLoopTable 1 }
LbdVlanLoopEntry ::=
SEQUENCE {
lbdVlanLoopIndex Integer32,
lbdVlanLoopPorts PortList
}
lbdVlanLoopIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display port lists loop status by vlan."
::= { lbdVlanLoopEntry 1 }
lbdVlanLoopPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display port lists loop status by vlan."
::= { lbdVlanLoopEntry 2 }
lbdTrapsList OBJECT IDENTIFIER ::= { lbdTraps 0 }
lbdLoopOccur NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This is a trap that will send to snmp manager,and it will be generated when loop is occured."
::= {lbdTrapsList 1 }
lbdLoopRecover NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This is a trap that will send to snmp manager,and it will be generated when port is recovering."
::= {lbdTrapsList 2 }
-- -------------------------------------------------------------
-- link aggregation Function
-- -------------------------------------------------------------
laSystem OBJECT IDENTIFIER ::= { l2LAGroup 1 }
laChannel OBJECT IDENTIFIER ::= { l2LAGroup 2 }
-- -------------------------------------------------------------
-- link aggregation system group
-- -------------------------------------------------------------
laSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to System.
This 16-bit value is read-only."
::= { laSystem 1 }
laSystemLoadBalanceAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
macSrc(1),
macDst(2),
macSrcDst(3),
ipSrc(4),
ipDst(5),
ipSrcDst(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Link selection policy to be used by the port-channel.
Selection policy isid implies selection based on Service-instance
and is applicable only in Provider BackBone bridge."
DEFVAL { macSrc }
::= { laSystem 2 }
laActorSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only MAC address value used as a unique
identifier for the System."
::= { laSystem 3 }
-- -------------------------------------------------------------
-- link aggregation Channel Group Information
-- -------------------------------------------------------------
laPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF LaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel"
::= { laChannel 1 }
laPortChannelEntry OBJECT-TYPE
SYNTAX LaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created port-channel port"
INDEX { laPortChannelIfIndex }
::= { laPortChannelTable 1 }
LaPortChannelEntry ::=
SEQUENCE {
laPortChannelIfIndex InterfaceIndex,
laPortChannelMaxPorts INTEGER,
laPortChannelMemberNumber INTEGER,
laPortChannelMemberList PortList,
laSystemChannelGroupID INTEGER,
laPortChannelMode INTEGER
}
laPortChannelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the port-channel(Aggregator's interface index). "
::= { laPortChannelEntry 1 }
laPortChannelMaxPorts OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { laPortChannelEntry 2 }
laPortChannelMemberNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { laPortChannelEntry 3 }
laPortChannelMemberList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Member Port list of the port channel. Add the ports as a
aggregation member associated of a port-channel."
::= { laPortChannelEntry 4 }
laSystemChannelGroupID OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value assigned to System.
This 16-bit value is read-only."
::= { laPortChannelEntry 5 }
laPortChannelMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2),
on(3),
disabled(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current Operating Channel Mode of the port
active(1) - it will always send frames along the configured links.
passive(2) - If the actor and partner are both in passive mode, they do not
exchange LACP packets.
on(3) - force the port to enable channeling (Manual).
disabled(4) - channeling is disabled."
::= { laPortChannelEntry 6 }
-- -------------------------------------------------------------
-- link aggregation Port Channel Detail Information
-- -------------------------------------------------------------
laChannelDetailTable OBJECT-TYPE
SYNTAX SEQUENCE OF LaChannelDetailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel"
::= { laChannel 2 }
laChannelDetailEntry OBJECT-TYPE
SYNTAX LaChannelDetailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created port-channel port"
INDEX { laChannelDetailPort }
::= { laChannelDetailTable 1 }
LaChannelDetailEntry ::=
SEQUENCE {
laChannelDetailPort InterfaceIndex,
laChannelDetailLACPTimeout INTEGER,
laChannelDetailWorkingMode INTEGER,
laChannelDetailLACPState INTEGER,
laChannelDetailPortPriority INTEGER,
laChannelDetailPortNumber INTEGER
}
laChannelDetailPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the port-channel(Aggregator's interface index). "
::= { laChannelDetailEntry 1 }
laChannelDetailLACPTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates LACP_Timeout to this Aggregation Port.
short(1) - LACP Timeout 3 seconds.
long (2) - LACP Timeout 90 seconds."
::= { laChannelDetailEntry 2 }
laChannelDetailWorkingMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current Operating Channel Mode of the port
active(1) - it will always send frames along the configured links.
passive(2) - If the actor and partner are both in passive mode, they do not
exchange LACP packets."
::= { laChannelDetailEntry 3 }
laChannelDetailLACPState OBJECT-TYPE
SYNTAX INTEGER {
upInBndl(0),
standby(1),
down(2),
upIndividual(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only object is used to display the port state in aggregation.
upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
standby(1) - The port is capable of joining in
aggregation group, when any of the ports in
aggregation group goes down.
down(2) - The port is operationally down in lower layers.
or the port is operational in lower layers
but temporarily not able to participate
in aggregation because of different partner
information in the same group.
upIndividual(3) - The port is operating individually and
is not taking part in aggregation."
::= { laChannelDetailEntry 4 }
laChannelDetailPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Channel Detail Information Port Priority."
::= { laChannelDetailEntry 5 }
laChannelDetailPortNumber OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Channel Detail Information Port number."
::= { laChannelDetailEntry 6 }
-- -------------------------------------------------------------
-- link aggregation Port Channel Neighbor Information
-- -------------------------------------------------------------
laChannelNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF LaChannelNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel"
::= { laChannel 3 }
laChannelNeighborEntry OBJECT-TYPE
SYNTAX LaChannelNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created port-channel port"
INDEX { laChannelNeighborPort }
::= { laChannelNeighborTable 1 }
LaChannelNeighborEntry ::=
SEQUENCE {
laChannelNeighborPort InterfaceIndex,
laChannelNeighborSystemPriority INTEGER,
laChannelNeighborSystemID MacAddress,
laChannelNeighborPortNo INTEGER,
laChannelNeighborLACPTimeout INTEGER,
laChannelNeighborWorkingMode INTEGER,
laChannelNeighborPortPriority INTEGER
}
laChannelNeighborPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the port-channel(Aggregator's interface index). "
::= { laChannelNeighborEntry 1 }
laChannelNeighborSystemPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Channel Neighbor Information Partner System Priority."
::= { laChannelNeighborEntry 2 }
laChannelNeighborSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Channel Neighbor Information Partner System ID."
::= { laChannelNeighborEntry 3 }
laChannelNeighborPortNo OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Channel Detail Information Port number."
::= { laChannelNeighborEntry 4 }
laChannelNeighborLACPTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Channel Neighbor Information Partner LACP Timeout."
::= { laChannelNeighborEntry 5 }
laChannelNeighborWorkingMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Channel Neighbor Information Partner LACP Timeout."
::= { laChannelNeighborEntry 6 }
laChannelNeighborPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Channel Detail Information Port Priority."
::= { laChannelNeighborEntry 7 }
lldpStatistics OBJECT IDENTIFIER ::= { l2LLDPGroup 15 }
lldpLocalSystemData OBJECT IDENTIFIER ::= { l2LLDPGroup 16 }
lldpRemoteSystemsData OBJECT IDENTIFIER ::= { l2LLDPGroup 17 }
--
-- ***********************************************************
--
-- D-Link LLDP Global Settings
--
-- ***********************************************************
--
lldpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling or disabling LLDP in the system."
DEFVAL { disabled }
::= { l2LLDPGroup 1 }
lldpForwardState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling or disabling LLDP Forward State in the system."
DEFVAL { disabled }
::= { l2LLDPGroup 2 }
lldpTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling or disabling LLDP Trap State in the system."
DEFVAL { disabled }
::= { l2LLDPGroup 3 }
lldpMEDTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling or disabling LLDP-MED Trap State in the system."
DEFVAL { disabled }
::= { l2LLDPGroup 4 }
lldpMsgTxInterval OBJECT-TYPE
SYNTAX Integer32 (5..32768)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for LLDP packet update frequency.
The timer in units of seconds."
--DEFVAL { 30 }
::= { l2LLDPGroup 5 }
lldpMsgHoldMultiplier OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time-to-live value expressed as a multiple of the
lldpMessageTxInterval object.The actual time-to-live value
used in LLDP frames, transmitted on behalf of this LLDP agent,
can be expressed by the following formula: TTL = min(65535,
(lldpMessageTxInterval * lldpMessageTxHoldMultiplier))"
--DEFVAL { 4 }
::= { l2LLDPGroup 6 }
lldpReinitDelay OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for LLDP Reinitialization Delay.
The timer in units of seconds."
--DEFVAL { 2 }
::= { l2LLDPGroup 7 }
lldpTxDelay OBJECT-TYPE
SYNTAX Integer32 (1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)."
--DEFVAL { 2 }
::= { l2LLDPGroup 8 }
--
-- ***********************************************************
--
-- D-Link LLDP Port Settings
--
-- ***********************************************************
--
lldpPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls LLDP frame transmission on individual
ports."
::= { l2LLDPGroup 10 }
lldpPortConfigEntry OBJECT-TYPE
SYNTAX LldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information for a particular port.
This configuration parameter controls the transmission and
the reception of LLDP frames on those ports whose rows are
created in this table."
INDEX { lldpPortConfigPortNum }
::= { lldpPortConfigTable 1 }
LldpPortConfigEntry ::= SEQUENCE {
lldpPortConfigPortNum LldpPortNumber,
lldpPortConfigAdminStatus INTEGER,
lldpPortConfigSubtype INTEGER,
lldpPortConfigTLVsTxEnable BITS,
lldpPortStatsClear Integer32,
lldpPortNeighborClear Integer32
}
lldpPortConfigPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpPortConfigTable."
::= { lldpPortConfigEntry 1 }
lldpPortConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
txOnly(1),
rxOnly(2),
txAndRx(3),
disabled(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively desired status of the local LLDP agent.
If the associated lldpPortConfigAdminStatus object has a
value of 'txOnly(1)', then LLDP agent will transmit LLDP
frames on this port and it will not store any information
about the remote systems connected.
If the associated lldpPortConfigAdminStatus object has a
value of 'rxOnly(2)', then the LLDP agent will receive,
but it will not transmit LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'txAndRx(3)', then the LLDP agent will transmit
and receive LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'disabled(4)', then LLDP agent will not transmit or
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
other tables, before the port's lldpPortConfigAdminStatus
becomes disabled, then the information will naturally age out."
REFERENCE
"IEEE 802.1AB-2005 10.5.1"
DEFVAL { txAndRx }
::= { lldpPortConfigEntry 2 }
lldpPortConfigSubtype OBJECT-TYPE
SYNTAX INTEGER {
local(1),
macAddress(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP Port Settings Subtype."
DEFVAL { local }
::= { lldpPortConfigEntry 3 }
--
-- ***********************************************************
--
-- D-Link LLDP Basic TLVs Settings
--
-- ***********************************************************
--
lldpPortConfigTLVsTxEnable OBJECT-TYPE
SYNTAX BITS {
portDesc(0),
sysName(1),
sysDesc(2),
sysCap(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpPortConfigTLVsTxEnable, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type associated
with a specific optional TLV.
It should be noted that the organizationally-specific TLVs
are excluded from the lldpTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should
have similar configuration object to control transmission
of their organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should
transmit 'Port Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit
'System Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
'System Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit
'System Capabilities TLV'.
There is no bit reserved for the management address TLV type
since transmission of management address TLVs are controlled
by another object, lldpConfigManAddrTable.
The default value for lldpPortConfigTLVsTxEnable object is
empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
-- DEFVAL { { } }
::= { lldpPortConfigEntry 4 }
lldpPortStatsClear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"trigger port statisc clear.."
::= { lldpPortConfigEntry 5 }
lldpPortNeighborClear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"trigger port neighbor info clear.."
::= { lldpPortConfigEntry 6}
--
-- ***********************************************************
--
-- D-Link LLDP Management Address List
--
-- ***********************************************************
--
-- lldpManAddrConfigTxPortsTable : selection of management addresses
-- to be transmitted on a specified set
-- of ports.
--
lldpConfigManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpConfigManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP management address
TLV instances to be transmitted on individual ports."
::= { l2LLDPGroup 11 }
lldpConfigManAddrEntry OBJECT-TYPE
SYNTAX LldpConfigManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set
of ports (represented as a PortList) on which the local
system management address instance will be transmitted.
Each active lldpConfigManAddrEntry must be restored from
non-volatile and re-created (along with the corresponding
lldpLocManAddrEntry) after a re-initialization of the
management system."
INDEX { lldpConfigManAddrSubtype,
lldpConfigManAddr }
::= { lldpConfigManAddrTable 1 }
LldpConfigManAddrEntry ::= SEQUENCE {
lldpConfigManAddrSubtype AddressFamilyNumbers,
lldpConfigManAddr InetAddress,
lldpConfigManAddrPortsTxEnable LldpPortList
}
lldpConfigManAddrSubtype OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.3"
::= { lldpConfigManAddrEntry 1 }
lldpConfigManAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.4"
::= { lldpConfigManAddrEntry 2 }
lldpConfigManAddrPortsTxEnable OBJECT-TYPE
SYNTAX LldpPortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of ports that are identified by a PortList, in which
each port is represented as a bit. The corresponding local
system management address instance will be transmitted on the
member ports of the lldpManAddrPortsTxEnable.
The default value for lldpConfigManAddrPortsTxEnable object
is empty binary string, which means no ports are specified
for advertising indicated management address instance."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { ''H } -- empty binary string
::= { lldpConfigManAddrEntry 3 }
--
-- ***********************************************************
--
-- LLDP Statistics Information
--
-- ***********************************************************
--
lldpStatsRemTablesLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime object (defined in IETF RFC 3418)
at the time an entry is created, modified, or deleted in the
in tables associated with the lldpRemoteSystemsData objects
and all LLDP extension objects associated with remote systems.
An NMS can use this object to reduce polling of the
lldpRemoteSystemsData objects."
::= { lldpStatistics 1 }
lldpStatsRemTablesInserts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "table entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the complete set of information
advertised by a particular MSAP has been inserted into tables
contained in lldpRemoteSystemsData and lldpExtensions objects.
The complete set of information received from a particular
MSAP should be inserted into related tables. If partial
information cannot be inserted for a reason such as lack
of resources, all of the complete set of information should
be removed.
This counter should be incremented only once after the
complete set of information is successfully recorded
in all related tables. Any failures during inserting
information set which result in deletion of previously
inserted information should not trigger any changes in
lldpStatsRemTablesInserts since the insert is not completed
yet or or in lldpStatsRemTablesDeletes, since the deletion
would only be a partial deletion. If the failure was the
result of lack of resources, the lldpStatsRemTablesDrops
counter should be incremented once."
::= { lldpStatistics 2 }
lldpStatsRemTablesDeletes OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "table entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the complete set of information
advertised by a particular MSAP has been deleted from
tables contained in lldpRemoteSystemsData and lldpExtensions
objects.
This counter should be incremented only once when the
complete set of information is completely deleted from all
related tables. Partial deletions, such as deletion of
rows associated with a particular MSAP from some tables,
but not from all tables are not allowed, thus should not
change the value of this counter."
::= { lldpStatistics 3 }
lldpStatsRemTablesDrops OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "table entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the complete set of information
advertised by a particular MSAP could not be entered into
tables contained in lldpRemoteSystemsData and lldpExtensions
objects because of insufficient resources."
::= { lldpStatistics 4 }
lldpStatsRemTablesAgeouts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the complete set of information
advertised by a particular MSAP has been deleted from tables
contained in lldpRemoteSystemsData and lldpExtensions objects
because the information timeliness interval has expired.
This counter should be incremented only once when the complete
set of information is completely invalidated (aged out)
from all related tables. Partial aging, similar to deletion
case, is not allowed, and thus, should not change the value
of this counter."
::= { lldpStatistics 5 }
--
-- TX statistics
--
lldpStatsTxPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpStatsTxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing LLDP transmission statistics for
individual ports. Entries are not required to exist in
this table while the lldpPortConfigEntry object is equal to
'disabled(4)'."
::= { lldpStatistics 6 }
lldpStatsTxPortEntry OBJECT-TYPE
SYNTAX LldpStatsTxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP frame transmission statistics for a particular port.
The port must be contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rxInfoTTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
adminStatus is disabled for the same port."
INDEX { lldpStatsTxPortNum }
::= { lldpStatsTxPortTable 1 }
LldpStatsTxPortEntry ::= SEQUENCE {
lldpStatsTxPortNum LldpPortNumber,
lldpStatsTxPortFramesTotal Counter32
}
lldpStatsTxPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpStatsTable."
::= { lldpStatsTxPortEntry 1 }
lldpStatsTxPortFramesTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LLDP frames transmitted by this LLDP agent
on the indicated port."
REFERENCE
"IEEE 802.1AB-2005 10.5.2.1"
::= { lldpStatsTxPortEntry 2 }
--
-- RX statistics
--
lldpRxStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpRxStatsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing LLDP reception statistics for individual
ports. Entries are not required to exist in this table while
the lldpPortConfigEntry object is equal to 'disabled(4)'."
::= { lldpStatistics 7 }
lldpRxStatsPortEntry OBJECT-TYPE
SYNTAX LldpRxStatsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP frame reception statistics for a particular port.
The port must be contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rxInfoTTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
adminStatus is disabled for the same port."
INDEX { lldpStatsRxPortNum }
::= { lldpRxStatsPortTable 1 }
LldpRxStatsPortEntry ::= SEQUENCE {
lldpStatsRxPortNum LldpPortNumber,
lldpStatsRxPortFramesDiscardedTotal Counter32,
lldpStatsRxPortFramesErrors Counter32,
lldpStatsRxPortFramesTotal Counter32,
lldpStatsRxPortTLVsDiscardedTotal Counter32,
lldpStatsRxPortTLVsUnrecognizedTotal Counter32,
lldpStatsRxPortAgeoutsTotal ZeroBasedCounter32
}
lldpStatsRxPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpStatsTable."
::= { lldpRxStatsPortEntry 1 }
lldpStatsRxPortFramesDiscardedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LLDP frames received by this LLDP agent on
the indicated port, and then discarded for any reason.
This counter can provide an indication that LLDP header
formating problems may exist with the local LLDP agent in
the sending system or that LLDPDU validation problems may
exist with the local LLDP agent in the receiving system."
REFERENCE
"IEEE 802.1AB-2005 10.5.2.2"
::= { lldpRxStatsPortEntry 2 }
lldpStatsRxPortFramesErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid LLDP frames received by this LLDP
agent on the indicated port, while this LLDP agent is enabled."
REFERENCE
"IEEE 802.1AB-2005 10.5.2.2"
::= { lldpRxStatsPortEntry 3 }
lldpStatsRxPortFramesTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid LLDP frames received by this LLDP agent
on the indicated port, while this LLDP agent is enabled."
REFERENCE
"IEEE 802.1AB-2005 10.5.2.2"
::= { lldpRxStatsPortEntry 4 }
lldpStatsRxPortTLVsDiscardedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LLDP TLVs discarded for any reason by this LLDP
agent on the indicated port."
REFERENCE
"IEEE 802.1AB-2005 10.5.2.2"
::= { lldpRxStatsPortEntry 5 }
lldpStatsRxPortTLVsUnrecognizedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LLDP TLVs received on the given port that
are not recognized by this LLDP agent on the indicated port.
An unrecognized TLV is referred to as the TLV whose type value
is in the range of reserved TLV types (000 1001 - 111 1110)
in Table 9.1 of IEEE Std 802.1AB-2005. An unrecognized
TLV may be a basic management TLV from a later LLDP version."
REFERENCE
"IEEE 802.1AB-2005 10.5.2.2"
::= { lldpRxStatsPortEntry 6 }
lldpStatsRxPortAgeoutsTotal OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter that represents the number of age-outs that
occurred on a given port. An age-out is the number of
times the complete set of information advertised by a
particular MSAP has been deleted from tables contained in
lldpRemoteSystemsData and lldpExtensions objects because
the information timeliness interval has expired.
This counter is similar to lldpStatsRemTablesAgeouts, except
that the counter is on a per port basis. This enables NMS to
poll tables associated with the lldpRemoteSystemsData objects
and all LLDP extension objects associated with remote systems
on the indicated port only.
This counter should be set to zero during agent initialization
and its value should not be saved in non-volatile storage.
When a port's admin status changes from 'disabled' to
'rxOnly', 'txOnly' or 'txAndRx', the counter associated with
the same port should reset to 0. The agent should also flush
all remote system information associated with the same port.
This counter should be incremented only once when the
complete set of information is invalidated (aged out) from
all related tables on a particular port. Partial aging
is not allowed, and thus, should not change the value of
this counter."
REFERENCE
"IEEE 802.1AB-2005 10.5.2.2"
::= { lldpRxStatsPortEntry 7 }
lldpStatsRemTablesClear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear the statisc of remote tables ,1 indicate trigger clear"
::= { lldpStatistics 8}
--
-- ***********************************************************
--
-- LLDP Local Port Information
--
-- ***********************************************************
--
lldpLocChassisIdSubtype OBJECT-TYPE
SYNTAX LldpChassisIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of encoding used to identify the chassis
associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 9.5.2.2"
::= { lldpLocalSystemData 1 }
lldpLocChassisId OBJECT-TYPE
SYNTAX LldpChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the chassis component
associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 9.5.2.3"
::= { lldpLocalSystemData 2 }
lldpLocSysName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the system name of the
local system. If the local agent supports IETF RFC 3418,
lldpLocSysName object should have the same value of sysName
object."
REFERENCE
"IEEE 802.1AB-2005 9.5.6.2"
::= { lldpLocalSystemData 3 }
lldpLocSysDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the system description
of the local system. If the local agent supports IETF RFC 3418,
lldpLocSysDesc object should have the same value of sysDesc
object."
REFERENCE
"IEEE 802.1AB-2005 9.5.7.2"
::= { lldpLocalSystemData 4 }
lldpLocSysCapSupported OBJECT-TYPE
SYNTAX LldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value used to identify which system capabilities
are supported on the local system."
REFERENCE
"IEEE 802.1AB-2005 9.5.8.1"
::= { lldpLocalSystemData 5 }
lldpLocSysCapEnabled OBJECT-TYPE
SYNTAX LldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value used to identify which system capabilities
are enabled on the local system."
REFERENCE
"IEEE 802.1AB-2005 9.5.7.2"
::= { lldpLocalSystemData 6 }
--
-- lldpLocPortTable : Port specific Local system data
--
lldpLocPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpLocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per port information
associated with the local system known to this agent."
::= { lldpLocalSystemData 7 }
lldpLocPortEntry OBJECT-TYPE
SYNTAX LldpLocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component.
Entries may be created and deleted in this table by the
agent."
INDEX { lldpLocPortNum }
::= { lldpLocPortTable 1 }
LldpLocPortEntry ::= SEQUENCE {
lldpLocPortNum LldpPortNumber,
lldpLocPortIdSubtype INTEGER,
lldpLocPortId OCTET STRING,
lldpLocPortDesc SnmpAdminString
}
lldpLocPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable."
::= { lldpLocPortEntry 1 }
lldpLocPortIdSubtype OBJECT-TYPE
SYNTAX INTEGER {
local(1),
macAddress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port identifier encoding used in the associated
'lldpLocPortId' object."
REFERENCE
"IEEE 802.1AB-2005 9.5.3.2"
::= { lldpLocPortEntry 2 }
lldpLocPortId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the port component
associated with a given port in the local system."
REFERENCE
"IEEE 802.1AB-2005 9.5.3.3"
::= { lldpLocPortEntry 3 }
lldpLocPortDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the 802 LAN station's port
description associated with the local system. If the local
agent supports IETF RFC 2863, lldpLocPortDesc object should
have the same value of ifDescr object."
REFERENCE
"IEEE 802.1AB-2005 9.5.5.2"
::= { lldpLocPortEntry 4 }
--
-- lldpLocManAddrTable : Management addresses of the local system
--
lldpLocManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpLocManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains management address information on the
local system known to this agent."
::= { lldpLocalSystemData 8 }
lldpLocManAddrEntry OBJECT-TYPE
SYNTAX LldpLocManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Management address information about a particular chassis
component. There may be multiple management addresses
configured on the system identified by a particular
lldpLocChassisId. Each management address should have
distinct 'management address type' (lldpLocManAddrSubtype) and
'management address' (lldpLocManAddr.)
Entries may be created and deleted in this table by the
agent."
INDEX { lldpLocManAddrSubtype,
lldpLocManAddr }
::= { lldpLocManAddrTable 1 }
LldpLocManAddrEntry ::= SEQUENCE {
lldpLocManAddrSubtype AddressFamilyNumbers,
lldpLocManAddr InetAddress,
lldpLocManAddrLen Integer32,
lldpLocManAddrIfSubtype LldpManAddrIfSubtype,
lldpLocManAddrIfId Integer32,
lldpLocManAddrOID OBJECT IDENTIFIER
}
lldpLocManAddrSubtype OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.3"
::= { lldpLocManAddrEntry 1 }
lldpLocManAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.4"
::= { lldpLocManAddrEntry 2 }
lldpLocManAddrLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total length of the management address subtype and the
management address fields in LLDPDUs transmitted by the
local LLDP agent.
The management address length field is needed so that the
receiving systems that do not implement SNMP will not be
required to implement an iana family numbers/address length
equivalency table in order to decode the management adress."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.2"
::= { lldpLocManAddrEntry 3 }
lldpLocManAddrIfSubtype OBJECT-TYPE
SYNTAX LldpManAddrIfSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the local system."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.5"
::= { lldpLocManAddrEntry 4 }
lldpLocManAddrIfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the interface number
regarding the management address component associated with
the local system."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.6"
::= { lldpLocManAddrEntry 5 }
lldpLocManAddrOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the local system agent."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.8"
::= { lldpLocManAddrEntry 6 }
-- ***********************************************************
--
-- D-Link LLDP Neighbor Port Information
--
-- ***********************************************************
lldpRemTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpRemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per physical network
connection known to this agent. The agent may wish to ensure
that only one lldpRemEntry is present for each local port,
or it may choose to maintain multiple lldpRemEntries for
the same local port.
The following procedure may be used to retrieve remote
systems information updates from an LLDP agent:
1. NMS polls all tables associated with remote systems
and keeps a local copy of the information retrieved.
NMS polls periodically the values of the following
objects:
a. lldpStatsRemTablesInserts
b. lldpStatsRemTablesDeletes
c. lldpStatsRemTablesDrops
d. lldpStatsRemTablesAgeouts
e. lldpStatsRxPortAgeoutsTotal for all ports.
2. LLDP agent updates remote systems MIB objects, and
sends out notifications to a list of notification
destinations.
3. NMS receives the notifications and compares the new
values of objects listed in step 1.
Periodically, NMS should poll the object
lldpStatsRemTablesLastChangeTime to find out if anything
has changed since the last poll. if something has
changed, NMS will poll the objects listed in step 1 to
figure out what kind of changes occurred in the tables.
if value of lldpStatsRemTablesInserts has changed,
then NMS will walk all tables by employing TimeFilter
with the last-polled time value. This request will
return new objects or objects whose values are updated
since the last poll.
if value of lldpStatsRemTablesAgeouts has changed,
then NMS will walk the lldpStatsRxPortAgeoutsTotal and
compare the new values with previously recorded ones.
For ports whose lldpStatsRxPortAgeoutsTotal value is
greater than the recorded value, NMS will have to
retrieve objects associated with those ports from
table(s) without employing a TimeFilter (which is
performed by specifying 0 for the TimeFilter.)
lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops
objects are provided for informational purposes."
::= { lldpRemoteSystemsData 1 }
lldpRemEntry OBJECT-TYPE
SYNTAX LldpRemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical network connection.
Entries may be created and deleted in this table by the agent,
if a physical topology discovery process is active."
INDEX {
lldpRemTimeMark,
lldpRemLocalPortNum,
lldpRemIndex
}
::= { lldpRemTable 1 }
LldpRemEntry ::= SEQUENCE {
lldpRemTimeMark TimeFilter,
lldpRemLocalPortNum LldpPortNumber,
lldpRemIndex Integer32,
lldpRemChassisIdSubtype LldpChassisIdSubtype,
lldpRemChassisId LldpChassisId,
lldpRemPortIdSubtype LldpPortIdSubtype,
lldpRemPortId LldpPortId,
lldpRemPortDesc SnmpAdminString,
lldpRemSysName SnmpAdminString,
lldpRemSysDesc SnmpAdminString,
lldpRemSysCapSupported LldpSystemCapabilitiesMap,
lldpRemSysCapEnabled LldpSystemCapabilitiesMap
}
lldpRemTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpRemEntry 1 }
lldpRemLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable."
::= { lldpRemEntry 2 }
lldpRemIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
will wrap between reboots."
::= { lldpRemEntry 3 }
lldpRemChassisIdSubtype OBJECT-TYPE
SYNTAX LldpChassisIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of encoding used to identify the chassis associated
with the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.2.2"
::= { lldpRemEntry 4 }
lldpRemChassisId OBJECT-TYPE
SYNTAX LldpChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the chassis component
associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.2.3"
::= { lldpRemEntry 5 }
lldpRemPortIdSubtype OBJECT-TYPE
SYNTAX LldpPortIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port identifier encoding used in the associated
'lldpRemPortId' object."
REFERENCE
"IEEE 802.1AB-2005 9.5.3.2"
::= { lldpRemEntry 6 }
lldpRemPortId OBJECT-TYPE
SYNTAX LldpPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the port component
associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.3.3"
::= { lldpRemEntry 7 }
lldpRemPortDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the description of
the given port associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.5.2"
::= { lldpRemEntry 8 }
lldpRemSysName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the system name of the
remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.6.2"
::= { lldpRemEntry 9 }
lldpRemSysDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the system description
of the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.7.2"
::= { lldpRemEntry 10 }
lldpRemSysCapSupported OBJECT-TYPE
SYNTAX LldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value used to identify which system capabilities
are supported on the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.8.1"
::= { lldpRemEntry 11 }
lldpRemSysCapEnabled OBJECT-TYPE
SYNTAX LldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value used to identify which system capabilities
are enabled on the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.8.2"
::= { lldpRemEntry 12 }
--
-- lldpRemManAddrTable : Management addresses of the remote system
--
lldpRemManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpRemManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per management address
information on the remote system learned on a particular port
contained in the local chassis known to this agent."
::= { lldpRemoteSystemsData 2 }
lldpRemManAddrEntry OBJECT-TYPE
SYNTAX LldpRemManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Management address information about a particular chassis
component. There may be multiple management addresses
configured on the remote system identified by a particular
lldpRemIndex whose information is received on
lldpRemManLocalPortNum of the local system. Each management
address should have distinct 'management address
type' (lldpRemManAddrSubtype) and 'management address'
(lldpRemManAddr.)
Entries may be created and deleted in this table by the
agent."
INDEX { lldpRemManTimeMark,
lldpRemManLocalPortNum,
lldpRemManIndex,
lldpRemManAddrSubtype,
lldpRemManAddr
}
::= { lldpRemManAddrTable 1 }
LldpRemManAddrEntry ::= SEQUENCE {
lldpRemManTimeMark TimeFilter,
lldpRemManLocalPortNum LldpPortNumber,
lldpRemManIndex Integer32,
lldpRemManAddrSubtype AddressFamilyNumbers,
lldpRemManAddr InetAddress,
lldpRemManAddrIfSubtype LldpManAddrIfSubtype,
lldpRemManAddrIfId Integer32,
lldpRemManAddrOID OBJECT IDENTIFIER
}
lldpRemManTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpRemManAddrEntry 1 }
lldpRemManLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemManLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable."
::= { lldpRemManAddrEntry 2 }
lldpRemManIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemManIndex
will wrap between reboots."
::= { lldpRemManAddrEntry 3 }
lldpRemManAddrSubtype OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of management address identifier encoding used in
the associated 'lldpRemManagmentAddr' object."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.3"
::= { lldpRemManAddrEntry 4 }
lldpRemManAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.4"
::= { lldpRemManAddrEntry 5 }
lldpRemManAddrIfSubtype OBJECT-TYPE
SYNTAX LldpManAddrIfSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.5"
::= { lldpRemManAddrEntry 6 }
lldpRemManAddrIfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the interface number
regarding the management address component associated with
the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.6"
::= { lldpRemManAddrEntry 7 }
lldpRemManAddrOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.8"
::= { lldpRemManAddrEntry 8 }
--
-- lldpRemUnknownTLVTable : Unrecognized TLV information
--
lldpRemUnknownTLVTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpRemUnknownTLVEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about an incoming TLV which
is not recognized by the receiving LLDP agent. The TLV may
be from a later version of the basic management set.
This table should only contain TLVs that are found in
a single LLDP frame. Entries in this table, associated
with an MAC service access point (MSAP, the access point
for MAC services provided to the LCC sublayer, defined
in IEEE 100, which is also identified with a particular
lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with
most recently received unrecognized TLV from the same MSAP,
or they will naturally age out when the rxInfoTTL timer
(associated with the MSAP) expires."
REFERENCE
"IEEE 802.1AB-2005 10.3.2"
::= { lldpRemoteSystemsData 3 }
lldpRemUnknownTLVEntry OBJECT-TYPE
SYNTAX LldpRemUnknownTLVEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an unrecognized TLV received from a
physical network connection. Entries may be created and
deleted in this table by the agent, if a physical topology
discovery process is active."
INDEX {
lldpRemUnknownTimeMark,
lldpRemUnknownLocalPortNum,
lldpRemUnknownIndex,
lldpRemUnknownTLVType
}
::= { lldpRemUnknownTLVTable 1 }
LldpRemUnknownTLVEntry ::= SEQUENCE {
lldpRemUnknownTimeMark TimeFilter,
lldpRemUnknownLocalPortNum LldpPortNumber,
lldpRemUnknownIndex Integer32,
lldpRemUnknownTLVType Integer32,
lldpRemUnknownTLVInfo OCTET STRING
}
lldpRemUnknownTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpRemUnknownTLVEntry 1 }
lldpRemUnknownLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemUnknownLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable."
::= { lldpRemUnknownTLVEntry 2 }
lldpRemUnknownIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemUnknownIndex
will wrap between reboots."
::= { lldpRemUnknownTLVEntry 3 }
lldpRemUnknownTLVType OBJECT-TYPE
SYNTAX Integer32(9..126)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the value extracted from the type
field of the TLV."
REFERENCE
"IEEE 802.1AB-2005 10.3.5"
::= { lldpRemUnknownTLVEntry 4 }
lldpRemUnknownTLVInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..511))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the value extracted from the value
field of the TLV."
REFERENCE
"IEEE 802.1AB-2005 10.3.5"
::= { lldpRemUnknownTLVEntry 5 }
lldpXdot1Objects OBJECT IDENTIFIER ::= { l2LLDPGroup 13 }
--
-- D-Link Defined LLDP Extension Dot1 MIB Objects
--
-- LLDP IEEE 802.1 extension MIB groups
lldpXdot1Config OBJECT IDENTIFIER ::= { lldpXdot1Objects 1 }
lldpXdot1LocalData OBJECT IDENTIFIER ::= { lldpXdot1Objects 2 }
lldpXdot1RemoteData OBJECT IDENTIFIER ::= { lldpXdot1Objects 3 }
------------------------------------------------------------------------------
-- IEEE 802.1 - Configuration
------------------------------------------------------------------------------
--
-- lldpXdot1ConfigPortVlanTable : configure the transmission of the
-- Port VLAN-ID TLVs on set of ports.
--
lldpXdot1ConfigPortVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that controls selection of LLDP Port VLAN-ID TLVs
to be transmitted on individual ports."
::= { lldpXdot1Config 1 }
lldpXdot1ConfigPortVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Port
VLAN-ID TLV on LLDP transmission capable ports.
Each active lldpConfigEntry must be restored from non-volatile
storage (along with the corresponding sysLLDPPortConfigEntry)
after a re-initialization of the management system."
INDEX { lldpXdot1ConfigVlanPortNum }
::= { lldpXdot1ConfigPortVlanTable 1 }
LldpXdot1ConfigPortVlanEntry ::= SEQUENCE {
lldpXdot1ConfigVlanPortNum LldpPortNumber,
lldpXdot1ConfigPortVlanTxEnable TruthValue
}
lldpXdot1ConfigVlanPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
sysLLDPPortConfigTable."
::= { lldpXdot1ConfigPortVlanEntry 1 }
lldpXdot1ConfigPortVlanTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpXdot1ConfigPortVlanTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a given LLDP
transmission capable port.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigPortVlanEntry 2 }
--
-- lldpXdot1ConfigVlanNameTable : configure the transmission of the
-- VLAN name instances on set of ports.
--
lldpXdot1ConfigVlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP VLAN name TLV
instances to be transmitted on individual ports."
::= { lldpXdot1Config 2 }
lldpXdot1ConfigVlanNameEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
VLAN name instance will be transmitted.
Each active lldpXdot1ConfigVlanNameEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocVlanNameEntry) after a re-initialization of the
management system."
INDEX { lldpXdot1LocConfigVlanNamePortNum }
::= { lldpXdot1ConfigVlanNameTable 1 }
LldpXdot1ConfigVlanNameEntry ::= SEQUENCE {
lldpXdot1LocConfigVlanNamePortNum LldpPortNumber,
lldpXdot1ConfigVlanNameTxEnableVlanList OCTET STRING
}
lldpXdot1LocConfigVlanNamePortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot3LocPortTable."
::= { lldpXdot1ConfigVlanNameEntry 1 }
lldpXdot1ConfigVlanNameTxEnableVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that indicates whether the corresponding
Local System VLAN name instance will be transmitted on this port"
::= { lldpXdot1ConfigVlanNameEntry 2 }
--
-- lldpXdot1ConfigProtoVlanTable : configure the transmission of the
-- protocol VLAN instances on set
-- of ports.
--
lldpXdot1ConfigProtoVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP Port and Protocol
VLAN ID TLV instances to be transmitted on individual ports."
::= { lldpXdot1Config 3 }
lldpXdot1ConfigProtoVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol VLAN instance will be transmitted.
This configuration object augments the lldpXdot1LocVlanEntry,
therefore it is only present along with the Port and
Protocol VLAN ID instance contained in the associated
lldpXdot1LocVlanEntry entry.
Each active lldpXdot1ConfigProtoVlanEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocProtoVlanEntry) after a re-initialization of
the management system."
INDEX { lldpXdot1ConfigProtoVlanPortNum }
::= { lldpXdot1ConfigProtoVlanTable 1 }
LldpXdot1ConfigProtoVlanEntry ::= SEQUENCE {
lldpXdot1ConfigProtoVlanPortNum LldpPortNumber,
lldpXdot1ConfigProtoVlanTxEnable TruthValue
}
lldpXdot1ConfigProtoVlanPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot3LocPortTable."
::= { lldpXdot1ConfigProtoVlanEntry 1 }
lldpXdot1ConfigProtoVlanTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The boolean value that indicates whether the corresponding
Local System Port and Protocol VLAN instance will
be transmitted on the port defined by the given
lldpXdot1LocProtoVlanEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigProtoVlanEntry 2 }
--
-- lldpXdot1ConfigProtocolTable : configure the transmission of the
-- protocol instances on set
-- of ports.
--
lldpXdot1ConfigProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP Protocol
TLV instances to be transmitted on individual ports."
::= { lldpXdot1Config 4 }
lldpXdot1ConfigProtocolEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol instance will be transmitted.
Each active lldpXdot1ConfigProtocolEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocProtocolEntry) after a re-initialization of the
management system."
INDEX { lldpXdot1ConfigProtocolPortNum,lldpXdot1ConfigProtocolIndex }
::= { lldpXdot1ConfigProtocolTable 1 }
LldpXdot1ConfigProtocolEntry ::= SEQUENCE {
lldpXdot1ConfigProtocolPortNum LldpPortNumber,
lldpXdot1ConfigProtocolIndex Integer32,
lldpXdot1ConfigProtocolTxEnable TruthValue
}
lldpXdot1ConfigProtocolPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot1ConfigProtocolTable."
::= { lldpXdot1ConfigProtocolEntry 1 }
lldpXdot1ConfigProtocolIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity."
::= { lldpXdot1ConfigProtocolEntry 2 }
lldpXdot1ConfigProtocolTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The boolean value that indicates whether the corresponding
Local System Protocol Identity instance will be transmitted
on the port defined by the given lldpXdot1LocProtocolEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigProtocolEntry 3 }
------------------------------------------------------------------------------
-- IEEE 802.1 - Local System Information
------------------------------------------------------------------------------
lldpXdot1LocTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent."
::= { lldpXdot1LocalData 1 }
lldpXdot1LocEntry OBJECT-TYPE
SYNTAX LldpXdot1LocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about IEEE 802.1 organizationally defined
LLDP extension."
INDEX { lldpXdot1LocPortNum }
::= { lldpXdot1LocTable 1 }
LldpXdot1LocEntry ::= SEQUENCE {
lldpXdot1LocPortNum LldpPortNumber,
lldpXdot1LocPortVlanId Integer32
}
lldpXdot1LocPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot1LocTable."
::= { lldpXdot1LocEntry 1 }
lldpXdot1LocPortVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the port's VLAN identifier
associated with the local system. A value of zero shall
be used if the system either does not know the PVID or does
not support port-based VLAN operation."
REFERENCE
"IEEE 802.1AB-2005 F.2.1"
::= { lldpXdot1LocEntry 2 }
--
-- lldpXdot1LocProtoVlanTable: Port and Protocol VLAN information
--
lldpXdot1LocProtoVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per Port and Protocol
VLAN information about the local system."
::= { lldpXdot1LocalData 2 }
lldpXdot1LocProtoVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1LocProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port and protocol VLAN ID Information about a particular
port component. There may be multiple port and protocol VLANs,
identified by a particular lldpXdot1LocProtoVlanId, configured
on the given port."
INDEX { lldpXdot1LocProtoVlanPortNum, lldpXdot1LocProtoVlanId }
::= { lldpXdot1LocProtoVlanTable 1 }
LldpXdot1LocProtoVlanEntry ::= SEQUENCE {
lldpXdot1LocProtoVlanPortNum LldpPortNumber,
lldpXdot1LocProtoVlanId Integer32,
lldpXdot1LocProtoVlanSupported TruthValue,
lldpXdot1LocProtoVlanEnabled TruthValue
}
lldpXdot1LocProtoVlanPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot1LocTable."
::= { lldpXdot1LocProtoVlanEntry 1 }
lldpXdot1LocProtoVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
local system. A value of zero shall be used if the system
either does not know the protocol VLAN ID (PPVID) or does
not support port and protocol VLAN operation."
REFERENCE
"IEEE 802.1AB-2005 F.3.2"
::= { lldpXdot1LocProtoVlanEntry 2 }
lldpXdot1LocProtoVlanSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with the local system) supports port and protocol
VLANs."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1LocProtoVlanEntry 3 }
lldpXdot1LocProtoVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the local system."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1LocProtoVlanEntry 4 }
--
-- lldpXdot1LocVlanNameTable : VLAN name information about the local system
--
lldpXdot1LocVlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per IEEE 802.1Q VLAN
name information on the local system known to this agent."
::= { lldpXdot1LocalData 3 }
lldpXdot1LocVlanNameEntry OBJECT-TYPE
SYNTAX LldpXdot1LocVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1LocVlanId, configured on the given port."
INDEX { lldpXdot1LocVlanNamePortNum,lldpXdot1LocVlanId }
::= { lldpXdot1LocVlanNameTable 1 }
LldpXdot1LocVlanNameEntry ::= SEQUENCE {
lldpXdot1LocVlanNamePortNum LldpPortNumber,
lldpXdot1LocVlanId VlanId,
lldpXdot1LocVlanName SnmpAdminString
}
lldpXdot1LocVlanNamePortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot1LocVlanNameTable."
::= { lldpXdot1LocVlanNameEntry 1 }
lldpXdot1LocVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible."
REFERENCE
"IEEE 802.1AB-2005 F.4.2"
::= { lldpXdot1LocVlanNameEntry 2 }
lldpXdot1LocVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify VLAN name identified by the
Vlan Id associated with the given port on the local system.
This object should contain the value of the dot1QVLANStaticName
object (defined in IETF RFC 2674) identified with the given
lldpXdot1LocVlanId."
REFERENCE
"IEEE 802.1AB-2005 F.4.4"
::= { lldpXdot1LocVlanNameEntry 3 }
--
-- lldpXdot1LocProtocolTable : Protocol Identity information
--
lldpXdot1LocProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per protocol identity
information on the local system known to this agent."
REFERENCE
"IEEE 802.1AB-2005 F.5"
::= { lldpXdot1LocalData 4 }
lldpXdot1LocProtocolEntry OBJECT-TYPE
SYNTAX LldpXdot1LocProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about particular protocols that are accessible
through the given port component.
There may be multiple protocols, identified by particular
lldpXdot1ProtocolIndex, and lldpLocPortNum."
REFERENCE
"IEEE 802.1AB-2005 F.5"
INDEX { lldpXdot1LocProtocolPortNum,lldpXdot1LocProtocolIndex }
::= { lldpXdot1LocProtocolTable 1 }
LldpXdot1LocProtocolEntry ::= SEQUENCE {
lldpXdot1LocProtocolPortNum LldpPortNumber,
lldpXdot1LocProtocolIndex Integer32,
lldpXdot1LocProtocolId OCTET STRING
}
lldpXdot1LocProtocolPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot1LocProtocolTable."
::= { lldpXdot1LocProtocolEntry 1 }
lldpXdot1LocProtocolIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity."
::= { lldpXdot1LocProtocolEntry 2 }
lldpXdot1LocProtocolId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The octet string value used to identify the protocols
associated with the given port of the local system."
REFERENCE
"IEEE 802.1AB-2005 F.5.3"
::= { lldpXdot1LocProtocolEntry 3 }
------------------------------------------------------------------------------
-- IEEE 802.1 - Remote System Information
------------------------------------------------------------------------------
lldpXdot1RemTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per physical network
connection known to this agent. The agent may wish to
ensure that only one lldpXdot1RemEntry is present for
each local port, or it may choose to maintain multiple
lldpXdot1RemEntries for the same local port."
::= { lldpXdot1RemoteData 1 }
lldpXdot1RemEntry OBJECT-TYPE
SYNTAX LldpXdot1RemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component."
INDEX { lldpXdot1RemTimeMark,lldpXdot1RemLocalPortNum,lldpXdot1RemIndex }
::= { lldpXdot1RemTable 1 }
LldpXdot1RemEntry ::= SEQUENCE {
lldpXdot1RemTimeMark TimeFilter,
lldpXdot1RemLocalPortNum LldpPortNumber,
lldpXdot1RemIndex Integer32,
lldpXdot1RemPortVlanId Integer32
}
lldpXdot1RemTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXdot1RemEntry 1 }
lldpXdot1RemLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable."
::= { lldpXdot1RemEntry 2 }
lldpXdot1RemIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemIndex
will wrap between reboots."
::= { lldpXdot1RemEntry 3 }
lldpXdot1RemPortVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the port's VLAN identifier
associated with the remote system. if the remote system
either does not know the PVID or does not support port-based
VLAN operation, the value of lldpXdot1RemPortVlanId should
be zero."
REFERENCE
"IEEE 802.1AB-2005 F.2.1"
::= { lldpXdot1RemEntry 4 }
lldpXdot1RemProtoVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per Port and Protocol
VLAN information about the remote system, received on the
given port."
::= { lldpXdot1RemoteData 2 }
lldpXdot1RemProtoVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1RemProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port and protocol VLAN name Information about a particular
port component. There may be multiple protocol VLANs,
identified by a particular lldpXdot1RemProtoVlanId, configured
on the remote system."
INDEX { lldpXdot1RemProtoVlanTimeMark,
lldpXdot1RemProtoVlanLocalPortNum,
lldpXdot1RemProtoVlanIndex,
lldpXdot1RemProtoVlanId }
::= { lldpXdot1RemProtoVlanTable 1 }
LldpXdot1RemProtoVlanEntry ::= SEQUENCE {
lldpXdot1RemProtoVlanTimeMark TimeFilter,
lldpXdot1RemProtoVlanLocalPortNum LldpPortNumber,
lldpXdot1RemProtoVlanIndex Integer32,
lldpXdot1RemProtoVlanId Integer32,
lldpXdot1RemProtoVlanSupported TruthValue,
lldpXdot1RemProtoVlanEnabled TruthValue
}
lldpXdot1RemProtoVlanTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXdot1RemProtoVlanEntry 1 }
lldpXdot1RemProtoVlanLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable."
::= { lldpXdot1RemProtoVlanEntry 2 }
lldpXdot1RemProtoVlanIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemIndex
will wrap between reboots."
::= { lldpXdot1RemProtoVlanEntry 3 }
lldpXdot1RemProtoVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.
If port and protocol VLANs are not supported on the given
port associated with the remote system, or if the port is
not enabled with any port and protocol VLAN, the value of
lldpXdot1RemProtoVlanId should be zero."
REFERENCE
"IEEE 802.1AB-2005 F.3.2"
::= { lldpXdot1RemProtoVlanEntry 4 }
lldpXdot1RemProtoVlanSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with the remote system) is capable of supporting
port and protocol VLANs."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1RemProtoVlanEntry 5 }
lldpXdot1RemProtoVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the remote system."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1RemProtoVlanEntry 6 }
--
-- lldpXdot1RemVlanNameTable : VLAN name information of the remote
-- systems
--
lldpXdot1RemVlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per IEEE 802.1Q VLAN
name information about the remote system, received on the
given port."
REFERENCE
"IEEE 802.1AB-2005 F.4"
::= { lldpXdot1RemoteData 3 }
lldpXdot1RemVlanNameEntry OBJECT-TYPE
SYNTAX LldpXdot1RemVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1RemVlanId, received on the given port."
INDEX { lldpXdot1RemVlanNameTimeMark,lldpXdot1RemVlanNameLocalPortNum,lldpXdot1RemVlanNameIndex,lldpXdot1RemVlanId }
::= { lldpXdot1RemVlanNameTable 1 }
LldpXdot1RemVlanNameEntry ::= SEQUENCE {
lldpXdot1RemVlanNameTimeMark TimeFilter,
lldpXdot1RemVlanNameLocalPortNum LldpPortNumber,
lldpXdot1RemVlanNameIndex Integer32,
lldpXdot1RemVlanId VlanId,
lldpXdot1RemVlanName SnmpAdminString
}
lldpXdot1RemVlanNameTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXdot1RemVlanNameEntry 1 }
lldpXdot1RemVlanNameLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemVlanNameLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable."
::= { lldpXdot1RemVlanNameEntry 2 }
lldpXdot1RemVlanNameIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemVlanNameIndex
will wrap between reboots."
::= { lldpXdot1RemVlanNameEntry 3 }
lldpXdot1RemVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port of the remote system
is compatible."
REFERENCE
"IEEE 802.1AB-2005 F.4.2"
::= { lldpXdot1RemVlanNameEntry 4 }
lldpXdot1RemVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify VLAN name identified by the
VLAN Id associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 F.4.4"
::= { lldpXdot1RemVlanNameEntry 5 }
--
-- lldpXdot1RemProtocolTable : Protocol information of the remote systems
--
lldpXdot1RemProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per protocol information
about the remote system, received on the given port."
::= { lldpXdot1RemoteData 4 }
lldpXdot1RemProtocolEntry OBJECT-TYPE
SYNTAX LldpXdot1RemProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol information about a particular port component.
There may be multiple protocols, identified by a particular
lldpXdot1ProtocolIndex, received on the given port."
INDEX { lldpXdot1RemProtocolTimeMark,lldpXdot1RemProtocolLocalPortNum,lldpXdot1RemProtocolIndex,lldpXdot1RemProtocolIdIndex }
::= { lldpXdot1RemProtocolTable 1 }
LldpXdot1RemProtocolEntry ::= SEQUENCE {
lldpXdot1RemProtocolTimeMark TimeFilter,
lldpXdot1RemProtocolLocalPortNum LldpPortNumber,
lldpXdot1RemProtocolIndex Integer32,
lldpXdot1RemProtocolIdIndex Integer32,
lldpXdot1RemProtocolId OCTET STRING
}
lldpXdot1RemProtocolTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXdot1RemProtocolEntry 1 }
lldpXdot1RemProtocolLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemProtocolLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable."
::= { lldpXdot1RemProtocolEntry 2 }
lldpXdot1RemProtocolIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemProtocolIndex
will wrap between reboots."
::= { lldpXdot1RemProtocolEntry 3 }
lldpXdot1RemProtocolIdIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity."
::= { lldpXdot1RemProtocolEntry 4 }
lldpXdot1RemProtocolId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The octet string value used to identify the protocols
associated with the given port of remote system."
REFERENCE
"IEEE 802.1AB-2005 F.5.3"
::= { lldpXdot1RemProtocolEntry 5 }
lldpXdot3Objects OBJECT IDENTIFIER ::= { l2LLDPGroup 14 }
--
-- D-Link Defined LLDP Extension Dot3 MIB Objects
--
-- LLDP IEEE 802.3 extension MIB groups
lldpXdot3Config OBJECT IDENTIFIER ::= { lldpXdot3Objects 1 }
lldpXdot3LocalData OBJECT IDENTIFIER ::= { lldpXdot3Objects 2 }
lldpXdot3RemoteData OBJECT IDENTIFIER ::= { lldpXdot3Objects 3 }
------------------------------------------------------------------------------
-- IEEE 802.3 - Configuration
------------------------------------------------------------------------------
lldpXdot3PortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3PortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that controls selection of LLDP TLVs to be transmitted
on individual ports."
::= { lldpXdot3Config 1 }
lldpXdot3PortConfigEntry OBJECT-TYPE
SYNTAX LldpXdot3PortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.
Each active lldpXdot3PortConfigEntry must be from non-volatile
storage (along with the corresponding sysLLDPPortConfigEntry)
after a re-initialization of the management system."
INDEX { lldpXdot3PortConfigPortNum }
::= { lldpXdot3PortConfigTable 1 }
LldpXdot3PortConfigEntry ::= SEQUENCE {
lldpXdot3PortConfigPortNum LldpPortNumber,
lldpXdot3PortConfigTLVsTxEnable BITS
}
lldpXdot3PortConfigPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
sysLLDPPortConfigTable."
::= { lldpXdot3PortConfigEntry 1 }
lldpXdot3PortConfigTLVsTxEnable OBJECT-TYPE
SYNTAX BITS {
macPhyConfigStatus(0),
powerViaMDI(1),
linkAggregation(2),
maxFrameSize(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an IEEE 802.3 subtype associated with a specific IEEE
802.3 optional TLV. The bit 0 is not used since there is
no corresponding subtype.
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
should transmit 'MAC/PHY configuration/status TLV'.
The bit 'powerViaMDI(1)' indicates that LLDP agent should
transmit 'Power via MDI TLV'.
The bit 'linkAggregation(2)' indicates that LLDP agent should
transmit 'Link Aggregation TLV'.
The bit 'maxFrameSize(3)' indicates that LLDP agent should
transmit 'Maximum-frame-size TLV'.
The default value for lldpXdot3PortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
::= { lldpXdot3PortConfigEntry 2 }
------------------------------------------------------------------------------
-- IEEE 802.3 - Local Device Information
------------------------------------------------------------------------------
---
--- lldpXdot3LocPortTable: Ethernet Port AutoNeg/Speed/Duplex
--- Information Table
---
---
lldpXdot3LocPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 1 }
lldpXdot3LocPortEntry OBJECT-TYPE
SYNTAX LldpXdot3LocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component."
INDEX { lldpXdot3LocPortNum }
::= { lldpXdot3LocPortTable 1 }
LldpXdot3LocPortEntry ::= SEQUENCE {
lldpXdot3LocPortNum LldpPortNumber,
lldpXdot3LocPortAutoNegSupported TruthValue,
lldpXdot3LocPortAutoNegEnabled TruthValue,
lldpXdot3LocPortAutoNegAdvertisedCap OCTET STRING,
lldpXdot3LocPortOperMauType Integer32
}
lldpXdot3LocPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot3LocPortTable."
::= { lldpXdot3LocPortEntry 1 }
lldpXdot3LocPortAutoNegSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3LocPortEntry 2 }
lldpXdot3LocPortAutoNegEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3LocPortEntry 3 }
lldpXdot3LocPortAutoNegAdvertisedCap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system."
REFERENCE
"IEEE 802.1AB-2005 G.2.2"
::= { lldpXdot3LocPortEntry 4 }
lldpXdot3LocPortOperMauType OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value that indicates the operational MAU type
of the given port on the local system.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero."
REFERENCE
"IEEE 802.1AB-2005 G.2.3"
::= { lldpXdot3LocPortEntry 5 }
---
---
--- lldpXdot3LocPowerTable: Power Ethernet Information Table
---
---
lldpXdot3LocPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of power ethernet
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 2 }
lldpXdot3LocPowerEntry OBJECT-TYPE
SYNTAX LldpXdot3LocPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component."
INDEX { lldpXdot3LocPowerPortNum }
::= { lldpXdot3LocPowerTable 1 }
LldpXdot3LocPowerEntry ::= SEQUENCE {
lldpXdot3LocPowerPortNum LldpPortNumber,
lldpXdot3LocPowerPortClass LldpPowerPortClass,
lldpXdot3LocPowerMDISupported TruthValue,
lldpXdot3LocPowerMDIEnabled TruthValue,
lldpXdot3LocPowerPairControlable TruthValue,
lldpXdot3LocPowerPairs Integer32,
lldpXdot3LocPowerClass Integer32
}
lldpXdot3LocPowerPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot3LocPortTable."
::= { lldpXdot3LocPowerEntry 1 }
lldpXdot3LocPowerPortClass OBJECT-TYPE
SYNTAX LldpPowerPortClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that identifies the port Class of the given port
associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 2 }
lldpXdot3LocPowerMDISupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the MDI power is
supported on the given port associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 3 }
lldpXdot3LocPowerMDIEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to identify whether MDI power is
enabled on the given port associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 4 }
lldpXdot3LocPowerPairControlable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 5 }
lldpXdot3LocPowerPairs OBJECT-TYPE
SYNTAX Integer32(1|2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.2"
::= { lldpXdot3LocPowerEntry 6 }
lldpXdot3LocPowerClass OBJECT-TYPE
SYNTAX Integer32(1|2|3|4|5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.3"
::= { lldpXdot3LocPowerEntry 7 }
---
---
--- lldpXdot3LocLinkAggTable: Link Aggregation Information Table
---
---
lldpXdot3LocLinkAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of link aggregation
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 3 }
lldpXdot3LocLinkAggEntry OBJECT-TYPE
SYNTAX LldpXdot3LocLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Link Aggregation information about a particular port
component."
INDEX { lldpXdot3LocLinkAggPortNum }
::= { lldpXdot3LocLinkAggTable 1 }
LldpXdot3LocLinkAggEntry ::= SEQUENCE {
lldpXdot3LocLinkAggPortNum LldpPortNumber,
lldpXdot3LocLinkAggStatus LldpLinkAggStatusMap,
lldpXdot3LocLinkAggPortId Integer32
}
lldpXdot3LocLinkAggPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot3LocPortTable."
::= { lldpXdot3LocLinkAggEntry 1 }
lldpXdot3LocLinkAggStatus OBJECT-TYPE
SYNTAX LldpLinkAggStatusMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link."
REFERENCE
"IEEE 802.1AB-2005 G.4.1"
::= { lldpXdot3LocLinkAggEntry 2 }
lldpXdot3LocLinkAggPortId OBJECT-TYPE
SYNTAX Integer32(0|1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.
If the port is not in link aggregation state and/or it
does not support link aggregation, this value should be set
to zero."
REFERENCE
"IEEE 802.1AB-2005 G.4.2"
::= { lldpXdot3LocLinkAggEntry 3 }
---
---
--- lldpXdot3LocMaxFrameSizeTable: Maximum Frame Size information
---
---
lldpXdot3LocMaxFrameSizeTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 4 }
lldpXdot3LocMaxFrameSizeEntry OBJECT-TYPE
SYNTAX LldpXdot3LocMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maximum Frame Size information about a particular port
component."
INDEX { lldpXdot3LocMaxFrameSizePortNum }
::= { lldpXdot3LocMaxFrameSizeTable 1 }
LldpXdot3LocMaxFrameSizeEntry ::= SEQUENCE {
lldpXdot3LocMaxFrameSizePortNum LldpPortNumber,
lldpXdot3LocMaxFrameSize Integer32
}
lldpXdot3LocMaxFrameSizePortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is used as a port index to the
lldpXdot3LocMaxFrameSizeTable."
::= { lldpXdot3LocMaxFrameSizeEntry 1 }
lldpXdot3LocMaxFrameSize OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value indicating the maximum supported frame
size in octets on the given port of the local system."
REFERENCE
"IEEE 802.1AB-2005 G.5.1"
::= { lldpXdot3LocMaxFrameSizeEntry 2 }
------------------------------------------------------------------------------
-- IEEE 802.3 - Remote Devices Information
------------------------------------------------------------------------------
---
---
--- lldpXdot3RemPortTable: Ethernet Information Table
---
---
lldpXdot3RemPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system."
::= { lldpXdot3RemoteData 1 }
lldpXdot3RemPortEntry OBJECT-TYPE
SYNTAX LldpXdot3RemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical network connection."
INDEX { lldpXdot3RemTimeMark,lldpXdot3RemLocalPortNum,lldpXdot3RemIndex }
::= { lldpXdot3RemPortTable 1 }
LldpXdot3RemPortEntry ::= SEQUENCE {
lldpXdot3RemTimeMark TimeFilter,
lldpXdot3RemLocalPortNum LldpPortNumber,
lldpXdot3RemIndex Integer32,
lldpXdot3RemPortAutoNegSupported TruthValue,
lldpXdot3RemPortAutoNegEnabled TruthValue,
lldpXdot3RemPortAutoNegAdvertisedCap OCTET STRING,
lldpXdot3RemPortOperMauType Integer32
}
lldpXdot3RemTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXdot3RemPortEntry 1 }
lldpXdot3RemLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable."
::= { lldpXdot3RemPortEntry 2 }
lldpXdot3RemIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots."
::= { lldpXdot3RemPortEntry 3 }
lldpXdot3RemPortAutoNegSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3RemPortEntry 4 }
lldpXdot3RemPortAutoNegEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3RemPortEntry 5 }
lldpXdot3RemPortAutoNegAdvertisedCap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.2.2"
::= { lldpXdot3RemPortEntry 6 }
lldpXdot3RemPortOperMauType OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero."
REFERENCE
"IEEE 802.1AB-2005 G.2.3"
::= { lldpXdot3RemPortEntry 7 }
---
---
--- lldpXdot3RemPowerTable: Power Ethernet Information Table
---
---
lldpXdot3RemPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Ethernet power information (as a part
of the LLDP 802.3 organizational extension) of the remote
system."
::= { lldpXdot3RemoteData 2 }
lldpXdot3RemPowerEntry OBJECT-TYPE
SYNTAX LldpXdot3RemPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical network connection."
INDEX { lldpXdot3RemPowerTimeMark,
lldpXdot3RemPowerLocalPortNum,
lldpXdot3RemPowerIndex }
::= { lldpXdot3RemPowerTable 1 }
LldpXdot3RemPowerEntry ::= SEQUENCE {
lldpXdot3RemPowerTimeMark TimeFilter,
lldpXdot3RemPowerLocalPortNum LldpPortNumber,
lldpXdot3RemPowerIndex Integer32,
lldpXdot3RemPowerPortClass LldpPowerPortClass,
lldpXdot3RemPowerMDISupported TruthValue,
lldpXdot3RemPowerMDIEnabled TruthValue,
lldpXdot3RemPowerPairControlable TruthValue,
lldpXdot3RemPowerPairs Integer32,
lldpXdot3RemPowerClass Integer32
}
lldpXdot3RemPowerTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXdot3RemPowerEntry 1 }
lldpXdot3RemPowerLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable."
::= { lldpXdot3RemPowerEntry 2 }
lldpXdot3RemPowerIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots."
::= { lldpXdot3RemPowerEntry 3 }
lldpXdot3RemPowerPortClass OBJECT-TYPE
SYNTAX LldpPowerPortClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that identifies the port Class of the given port
associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 4 }
lldpXdot3RemPowerMDISupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 5 }
lldpXdot3RemPowerMDIEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to identify whether MDI power is
enabled on the given port associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 6 }
lldpXdot3RemPowerPairControlable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 7 }
lldpXdot3RemPowerPairs OBJECT-TYPE
SYNTAX Integer32(1|2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.2"
::= { lldpXdot3RemPowerEntry 8 }
lldpXdot3RemPowerClass OBJECT-TYPE
SYNTAX Integer32(1|2|3|4|5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.3"
::= { lldpXdot3RemPowerEntry 9 }
---
---
--- lldpXdot3RemLinkAggTable: Link Aggregation Information Table
---
---
lldpXdot3RemLinkAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains port link aggregation information
(as a part of the LLDP 802.3 organizational extension)
of the remote system."
::= { lldpXdot3RemoteData 3 }
lldpXdot3RemLinkAggEntry OBJECT-TYPE
SYNTAX LldpXdot3RemLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Link Aggregation information about remote system's port
component."
INDEX { lldpXdot3RemLinkAggTimeMark,
lldpXdot3RemLinkAggLocalPortNum,
lldpXdot3RemLinkAggIndex }
::= { lldpXdot3RemLinkAggTable 1 }
LldpXdot3RemLinkAggEntry ::= SEQUENCE {
lldpXdot3RemLinkAggTimeMark TimeFilter,
lldpXdot3RemLinkAggLocalPortNum LldpPortNumber,
lldpXdot3RemLinkAggIndex Integer32,
lldpXdot3RemLinkAggStatus LldpLinkAggStatusMap,
lldpXdot3RemLinkAggPortId Integer32
}
lldpXdot3RemLinkAggTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXdot3RemLinkAggEntry 1 }
lldpXdot3RemLinkAggLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable."
::= { lldpXdot3RemLinkAggEntry 2 }
lldpXdot3RemLinkAggIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots."
::= { lldpXdot3RemLinkAggEntry 3 }
lldpXdot3RemLinkAggStatus OBJECT-TYPE
SYNTAX LldpLinkAggStatusMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link."
REFERENCE
"IEEE 802.1AB-2005 G.4.1"
::= { lldpXdot3RemLinkAggEntry 4 }
lldpXdot3RemLinkAggPortId OBJECT-TYPE
SYNTAX Integer32(0|1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
If the remote port is not in link aggregation state and/or
it does not support link aggregation, this value should be
zero."
REFERENCE
"IEEE 802.1AB-2005 G.4.2"
::= { lldpXdot3RemLinkAggEntry 5 }
---
---
--- lldpXdot3RemMaxFrameSizeTable: Maximum Frame Size information
---
---
lldpXdot3RemMaxFrameSizeTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) of the remote system."
::= { lldpXdot3RemoteData 4 }
lldpXdot3RemMaxFrameSizeEntry OBJECT-TYPE
SYNTAX LldpXdot3RemMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maximum Frame Size information about a particular port
component."
INDEX { lldpXdot3RemMaxFrameSizeTimeMark,lldpXdot3RemMaxFrameSizeLocalPortNum,lldpXdot3RemMaxFrameSizeIndex }
::= { lldpXdot3RemMaxFrameSizeTable 1 }
LldpXdot3RemMaxFrameSizeEntry ::= SEQUENCE {
lldpXdot3RemMaxFrameSizeTimeMark TimeFilter,
lldpXdot3RemMaxFrameSizeLocalPortNum LldpPortNumber,
lldpXdot3RemMaxFrameSizeIndex Integer32,
lldpXdot3RemMaxFrameSize Integer32
}
lldpXdot3RemMaxFrameSizeTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXdot3RemMaxFrameSizeEntry 1 }
lldpXdot3RemMaxFrameSizeLocalPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable."
::= { lldpXdot3RemMaxFrameSizeEntry 2 }
lldpXdot3RemMaxFrameSizeIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots."
::= { lldpXdot3RemMaxFrameSizeEntry 3 }
lldpXdot3RemMaxFrameSize OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.5.1"
::= { lldpXdot3RemMaxFrameSizeEntry 4 }
lldpXMedNotifications OBJECT IDENTIFIER ::= { l2LLDPGroup 18 }
lldpXMedObjects OBJECT IDENTIFIER ::= { l2LLDPGroup 19 }
-- LLDP MED Extension Notifications
-- Transmission of LLDP MED Extension Notification is controlled by the
-- lldpNotificationInterval object in the LLDP MIB defined in
-- IEEE 802.1AB-2005
lldpXMedTopologyChangeDetected NOTIFICATION-TYPE
OBJECTS { lldpRemChassisIdSubtype,
lldpRemChassisId
-- , lldpXMedRemDeviceClass
}
STATUS current
DESCRIPTION
"A notification generated by the local device sensing
a change in the topology that indicates that a new remote
device attached to a local port, or a remote device disconnected
or moved from one port to another."
::= { lldpXMedNotifications 1 }
-- LLDP MED extension MIB groups
lldpXMedConfig OBJECT IDENTIFIER ::= { lldpXMedObjects 1 }
lldpXMedLocalData OBJECT IDENTIFIER ::= { lldpXMedObjects 2 }
lldpXMedRemoteData OBJECT IDENTIFIER ::= { lldpXMedObjects 3 }
-- textual conventions
LldpXMedDeviceClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Device Class to which the device is a member.
A value of notDefined(0) indicates that the device
has capabilities not covered by any of the LLDP-MED classes.
A value of endpointClass1(1) indicates that the device
has endpoint class 1 capabilities.
A value of endpointClass2(2) indicates that the device
has endpoint class 2 capabilities.
A value of endpointClass3(3) indicates that the device
has endpoint class 3 capabilities.
A value of networkConnectivity(4) indicates that the device
has network connectivity device capabilities.
"
SYNTAX INTEGER {
notDefined(0),
endpointClass1(1),
endpointClass2(2),
endpointClass3(3),
networkConnectivity(4)
}
-- LLDP-MED Capabilities TC
LldpXMedCapabilities ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Bitmap that includes the MED organizationally defined set of LLDP
TLVs the device is capable of and whose transmission is allowed on
the local LLDP agent by network management.
Each bit in the bitmap corresponds to an LLDP-MED subtype associated
with a specific TIA TR41.4 MED TLV.
Having the bit 'capabilities(0)' set indicates that the LLDP
agent refers to the Capabilities TLVs.
Having the bit 'networkPolicy(1)' set indicates that the LLDP
agent refers to the Network Policy TLVs.
Having the bit 'location(2)' set indicates that
the LLDP agent refers to the Emergency Communications
System Location TLVs.
Having the bit 'extendedPSE(3)' set indicates that
the LLDP agent refers to the Extended PoE TLVs with PSE
capabilities.
Having the bit 'extendedPD(4)' set indicates that
the LLDP agent refers to the Extended PoE TLVs with PD
capabilities.
Having the bit 'inventory(5)' set indicates that
the LLDP agent refers to the Hardware Revision, Firmware
Revision, Software Revision, Serial Number, Manufacturer Name,
Model Name, and Asset ID TLVs."
SYNTAX BITS {
capabilities(0),
networkPolicy(1),
location(2),
extendedPSE(3),
extendedPD(4),
inventory(5)
}
-- Policy Application Type Textual Convention
PolicyAppType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The media type that defines the primary function of the
application for the policy advertised by an endpoint.
Having the bit voice(1) set indicates that the media type defining
a primary function of the application for the policy advertised on
the local port is voice.
Having the bit voiceSignaling(3) set indicates that the media type
defining a primary function of the application for the policy
advertised on the local port is voice signaling.
Having the bit guestVoice(4) set indicates that the media type
Defining a primary function of the application for the policy
advertised on the local port is guest voice.
Having the bit guestVoiceSignaling(5) set indicates that the media
type defining a primary function of the application for the policy
advertised on the local port is guest voice signaling.
Having the bit softPhoneVoice(6) set indicates that the media type
Defining a primary function of the application for the policy
advertised on the local port is softphone voice.
Having the bit videoConferencing(7) set indicates that the media
type defining a primary function of the application for the policy
advertised on the local port is voice.
Having the bit streamingVideo(8) set indicates that the media type
defining a primary function of the application for the policy
advertised on the local port is streaming video.
Having the bit videoSignaling(2) set indicates that the media type
defining a primary function of the application for the policy
advertised on the local port is video signaling."
SYNTAX BITS {
unknown(0),
voice(1),
voiceSignaling(2),
guestVoice(3),
guestVoiceSignaling(4),
softPhoneVoice(5),
videoconferencing(6),
streamingVideo(7),
videoSignaling(8)
}
-- end type define
--
-- ***********************************************************
--
-- LLDP-MED Port Settings
--
-- ***********************************************************
--
lldpXMedLocDeviceClass OBJECT-TYPE
SYNTAX LldpXMedDeviceClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local Device Class."
REFERENCE
" ANSI/TIA-1057, Section 10.2.2.2"
::= { lldpXMedConfig 1 }
lldpXMedPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXMedPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that controls selection of LLDP TLVs to be transmitted
on individual ports."
::= { lldpXMedConfig 2 }
lldpXMedPortConfigEntry OBJECT-TYPE
SYNTAX LldpXMedPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that controls the
transmission of the MED organizationally defined TLVs on
LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpXMedPortConfigEntry must be stored and
retrieved from non-volatile storage (along with the
corresponding lldpPortConfigEntry) after a re-initialization
of the management system."
-- AUGMENTS { lldpPortConfigEntry }
INDEX { lldpXMedPortConfigPortNum }
::= { lldpXMedPortConfigTable 1 }
LldpXMedPortConfigEntry ::= SEQUENCE {
lldpXMedPortConfigPortNum LldpPortNumber,
lldpXMedPortCapSupported LldpXMedCapabilities,
lldpXMedPortConfigTLVsTxEnable LldpXMedCapabilities,
lldpXMedPortConfigNotifEnable TruthValue
}
lldpXMedPortConfigPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
sysLLDPPortConfigTable."
::= { lldpXMedPortConfigEntry 1 }
lldpXMedPortCapSupported OBJECT-TYPE
SYNTAX LldpXMedCapabilities
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible for the respective port
on the LLDP agent of the device. Each bit in the bitmap corresponds
to an LLDP-MED subtype associated with a specific TIA TR41.4 MED
optional TLV. If the bit is set, the agent supports the
corresponding TLV."
REFERENCE
"ANSI/TIA-1057, Section 10.2.2.3"
::= { lldpXMedPortConfigEntry 2 }
lldpXMedPortConfigTLVsTxEnable OBJECT-TYPE
SYNTAX LldpXMedCapabilities
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
includes the MED organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an LLDP-MED subtype associated with a specific TIA TR41.4 MED
optional TLV. If the bit is set, the agent will send the
corresponding TLV if the respective capability is supported per
port.
Setting a bit with in this object for a non-supported capability
shall have no functional effect and will result in an inconsistent
value error returned to the management application.
There are other rules and restrictions that prevent arbitrary
combinations of TLVs to be enabled on LLDP-MED devices according to
the device classes. These rules are defined in Section 10.2.1,
Tables 5 - 9 of ANSI/TIA-1057. In case a management application
attempts to set this object to a value that does not follow the rules,
the set operation shall have and will result in an inconsistent
value error returned to the management application.
Setting this object to an empty set is valid and effectively
disables LLDP-MED on a per-port basis by disabling transmission of
all MED organizational TLVs. In this case the remote tables objects
in the LLDP-MED MIB corresponding to the respective port will not
be populated.
The default value for lldpXMedPortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"ANSI/TIA-1057, Section 10.2.2.3"
::= { lldpXMedPortConfigEntry 3 }
lldpXMedPortConfigNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value of 'true(1)' enables sending the topology change
traps on this port.
A value of 'false(2)' disables sending the topology change
traps on this port."
REFERENCE
" ANSI/TIA-1057, Section 12.3"
DEFVAL { false }
::= { lldpXMedPortConfigEntry 4 }
lldpXMedFastStartRepeatCount OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times the fast start LLDPDU are being sent during the
activation of the fast start mechanism defined by LLDP-MED."
REFERENCE
" ANSI/TIA-1057, Section 11.2.1"
DEFVAL { 3 }
::= { lldpXMedConfig 3 }
------------------------------------------------------------------------------
-- LLDP-MED - Local Device Information
------------------------------------------------------------------------------
---
--- lldpXMedLocMediaPolicyTable: Local Media Policy
--- Information Table
---
---
lldpXMedLocMediaPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXMedLocMediaPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per policy type per port
of media policy information (as a part of the MED
organizational extension) on the local system known
to this agent."
::= { lldpXMedLocalData 1 }
lldpXMedLocMediaPolicyEntry OBJECT-TYPE
SYNTAX LldpXMedLocMediaPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular policy on a specific
port component."
INDEX { lldpXMedLocMediaPolicyPortNum, lldpXMedLocMediaPolicyAppType }
::= { lldpXMedLocMediaPolicyTable 1 }
LldpXMedLocMediaPolicyEntry ::= SEQUENCE {
lldpXMedLocMediaPolicyPortNum LldpPortNumber,
lldpXMedLocMediaPolicyAppType PolicyAppType,
lldpXMedLocMediaPolicyVlanID Integer32,
lldpXMedLocMediaPolicyPriority Integer32,
lldpXMedLocMediaPolicyDscp Dscp,
lldpXMedLocMediaPolicyUnknown TruthValue,
lldpXMedLocMediaPolicyTagged TruthValue
}
lldpXMedLocMediaPolicyPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable."
::= { lldpXMedLocMediaPolicyEntry 1 }
lldpXMedLocMediaPolicyAppType OBJECT-TYPE
SYNTAX PolicyAppType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The media type that defines the primary function of the
application for the policy advertised by an endpoint."
REFERENCE
"ANSI/TIA-1057, Section 10.2.3.1"
::= { lldpXMedLocMediaPolicyEntry 2 }
lldpXMedLocMediaPolicyVlanID OBJECT-TYPE
SYNTAX Integer32 (0|1..4094|4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged
frames, meaning that only the 802.1p priority level is significant
and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.5"
::= { lldpXMedLocMediaPolicyEntry 3 }
lldpXMedLocMediaPolicyPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the 802.1p priority
which is associated with the given port on the
local system."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.6 "
::= { lldpXMedLocMediaPolicyEntry 4 }
lldpXMedLocMediaPolicyDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with the given port on the local system."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.7"
::= { lldpXMedLocMediaPolicyEntry 5 }
lldpXMedLocMediaPolicyUnknown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignored.
A value of 'false' indicates that this network policy
is defined "
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.2"
::= { lldpXMedLocMediaPolicyEntry 6 }
lldpXMedLocMediaPolicyTagged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port based VLAN operation. In this case, both the
VLAN ID and the Layer 2 priority fields are ignored and
only the DSCP value has relevance "
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.3"
::= { lldpXMedLocMediaPolicyEntry 7 }
--- Inventory Information
--- Local Inventory Information transmitted by an endpoint
lldpXMedLocHardwareRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific hardware revision string
as advertised by the endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.1"
::= { lldpXMedLocalData 2 }
lldpXMedLocFirmwareRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific firmware revision string
as advertised by the endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.2"
::= { lldpXMedLocalData 3 }
lldpXMedLocSoftwareRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific software revision string
as advertised by the endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.3"
::= { lldpXMedLocalData 4 }
lldpXMedLocSerialNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific serial number
as advertised by the endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.4"
::= { lldpXMedLocalData 5 }
lldpXMedLocMfgName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific manufacturer name
as advertised by the endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.5"
::= { lldpXMedLocalData 6 }
lldpXMedLocModelName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific model name
as advertised by the endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.6"
::= { lldpXMedLocalData 7 }
lldpXMedLocAssetID OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific asset tracking identifier
as advertised by the endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.7"
::= { lldpXMedLocalData 8 }
--- Extended Power over Ethernet objects
---
lldpXMedLocXPoEDeviceType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
pseDevice(2),
pdDevice(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines the type of Power-via-MDI (Power over Ethernet) advertised
by the local device.
A value pseDevice(2) indicates that the device is advertised as a
Power Sourcing Entity (PSE).
A value pdDevice(3) indicates that the device is advertised as a
Powered Device (PD).
A value of none(4) indicates that the device does not support PoE."
REFERENCE
"ANSI/TIA-1057, Section 10.2.5.1"
::= { lldpXMedLocalData 10 }
------------------------------------------------------------------------------
-- LLDP-MED - Remote Devices Information
------------------------------------------------------------------------------
-- LLdpXMedRemCapabilitiesTable
-- this table is read by a manager to determine what capabilities
-- exists and are enabled on the remote system connected to the port
-- The information in this table is based upon the information advertised
-- by the remote device and received on each port in the capabilities TLV
lldpXMedRemCapabilitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXMedRemCapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that displays LLDP-MED capabilities of remote devices
connected to individual ports."
::= { lldpXMedRemoteData 1 }
lldpXMedRemCapabilitiesEntry OBJECT-TYPE
SYNTAX LldpXMedRemCapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP-MED capabilities of remote devices connected to the device
ports and communicating via LLDP-MED.
The remote tables in the LLDP-MED MIB excepting this table may be
sparsely populate. An entry in one of these table is meaningful
and shall be populated by the agent only if the corresponding bits
for the respective function are set in the objects in this table. "
INDEX { lldpXMedRemCapTimeMark,
lldpXMedRemCapPortNum,
lldpXMedRemCapIndex }
::= { lldpXMedRemCapabilitiesTable 1 }
LldpXMedRemCapabilitiesEntry ::= SEQUENCE {
lldpXMedRemCapTimeMark TimeFilter,
lldpXMedRemCapPortNum LldpPortNumber,
lldpXMedRemCapIndex Integer32,
lldpXMedRemCapSupported LldpXMedCapabilities
}
lldpXMedRemCapTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXMedRemCapabilitiesEntry 1 }
lldpXMedRemCapPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable."
::= { lldpXMedRemCapabilitiesEntry 2 }
lldpXMedRemCapIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
will wrap between reboots."
::= { lldpXMedRemCapabilitiesEntry 3 }
lldpXMedRemCapSupported OBJECT-TYPE
SYNTAX LldpXMedCapabilities
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible on the LLDP agent of the remote
device connected to this port. Each bit in the bitmap corresponds
to an LLDP-MED subtype associated with a specific TIA TR41.4 MED
optional TLV. If the bit is set, the agent has the capability
to support the corresponding TLV."
REFERENCE
"ANSI/TIA-1057, Sections 10.2.2.1"
::= { lldpXMedRemCapabilitiesEntry 4 }
---
---
--- lldpXMedRemMediaPolicyTable: Media Policy Table
---
---
lldpXMedRemMediaPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXMedRemMediaPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains media policy information as advertised
by the remote system.
This table may be sparsely populated. Entries in this table are
relevant only if the networkPolicy(0) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set."
::= { lldpXMedRemoteData 2 }
lldpXMedRemMediaPolicyEntry OBJECT-TYPE
SYNTAX LldpXMedRemMediaPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the per port per policy type policy
information for a particular physical network connection."
INDEX { lldpXMedRemMediaPolicyTimeMark,
lldpXMedRemMediaPolicyPortNum,
lldpXMedRemMediaPolicyIndex,
lldpXMedRemMediaPolicyAppType }
::= { lldpXMedRemMediaPolicyTable 1 }
LldpXMedRemMediaPolicyEntry ::= SEQUENCE {
lldpXMedRemMediaPolicyTimeMark TimeFilter,
lldpXMedRemMediaPolicyPortNum LldpPortNumber,
lldpXMedRemMediaPolicyIndex Integer32,
lldpXMedRemMediaPolicyAppType PolicyAppType,
lldpXMedRemMediaPolicyVlanID Integer32,
lldpXMedRemMediaPolicyPriority Integer32,
lldpXMedRemMediaPolicyDscp Dscp,
lldpXMedRemMediaPolicyUnknown TruthValue,
lldpXMedRemMediaPolicyTagged TruthValue
}
lldpXMedRemMediaPolicyTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXMedRemMediaPolicyEntry 1 }
lldpXMedRemMediaPolicyPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable."
::= { lldpXMedRemMediaPolicyEntry 2 }
lldpXMedRemMediaPolicyIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
will wrap between reboots."
::= { lldpXMedRemMediaPolicyEntry 3 }
lldpXMedRemMediaPolicyAppType OBJECT-TYPE
SYNTAX PolicyAppType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The media type that defines the primary function of the
application for the policy advertised by the endpoint connected
remotely to this port."
REFERENCE
"ANSI/TIA-1057, Section 10.2.3.1"
::= { lldpXMedRemMediaPolicyEntry 4 }
lldpXMedRemMediaPolicyVlanID OBJECT-TYPE
SYNTAX Integer32 (0|1..4094|4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An extension of the VLAN Identifier for the remote system
connected to this port, as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged
frames, meaning that only the 802.1p priority level is significant
and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.5"
::= { lldpXMedRemMediaPolicyEntry 5 }
lldpXMedRemMediaPolicyPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the 802.1p priority
which is associated with the remote system connected at
given port."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.6"
::= { lldpXMedRemMediaPolicyEntry 6 }
lldpXMedRemMediaPolicyDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with remote system connected at the port."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.7"
::= { lldpXMedRemMediaPolicyEntry 7 }
lldpXMedRemMediaPolicyUnknown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignored.
A value of 'false' indicates that this network policy
is defined."
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.2"
::= { lldpXMedRemMediaPolicyEntry 8 }
lldpXMedRemMediaPolicyTagged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port based VLAN operation. In this case, both the
VLAN ID and the Layer 2 priority fields are ignored and
only the DSCP value has relevance "
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.3"
::= { lldpXMedRemMediaPolicyEntry 9 }
--- lldpXMedRemInventoryTable - Remote Inventory Information
---
lldpXMedRemInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXMedRemInventoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains inventory information as advertised
by the remote system.
This table may be sparsely populated. Entries in this table are
relevant only if the inventory(2) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set "
::= { lldpXMedRemoteData 3 }
lldpXMedRemInventoryEntry OBJECT-TYPE
SYNTAX LldpXMedRemInventoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about inventory information for the remote devices
connected to the ports."
INDEX { lldpXMedRemTimeMark,
lldpXMedRemPortNum,
lldpXMedRemIndex }
::= { lldpXMedRemInventoryTable 1 }
LldpXMedRemInventoryEntry ::= SEQUENCE {
lldpXMedRemTimeMark TimeFilter,
lldpXMedRemPortNum LldpPortNumber,
lldpXMedRemIndex Integer32,
lldpXMedRemHardwareRev SnmpAdminString,
lldpXMedRemFirmwareRev SnmpAdminString,
lldpXMedRemSoftwareRev SnmpAdminString,
lldpXMedRemSerialNum SnmpAdminString,
lldpXMedRemMfgName SnmpAdminString,
lldpXMedRemModelName SnmpAdminString,
lldpXMedRemAssetID SnmpAdminString
}
lldpXMedRemTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works."
REFERENCE
"IETF RFC 2021 section 6"
::= { lldpXMedRemInventoryEntry 1 }
lldpXMedRemPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable."
::= { lldpXMedRemInventoryEntry 2 }
lldpXMedRemIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
will wrap between reboots."
::= { lldpXMedRemInventoryEntry 3 }
lldpXMedRemHardwareRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific hardware revision string
as advertised by the remote endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.1"
::= { lldpXMedRemInventoryEntry 4 }
lldpXMedRemFirmwareRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific firmware revision string
as advertised by the remote endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.2"
::= { lldpXMedRemInventoryEntry 5 }
lldpXMedRemSoftwareRev OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific software revision string
as advertised by the remote endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.3"
::= { lldpXMedRemInventoryEntry 6 }
lldpXMedRemSerialNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific serial number
as advertised by the remote endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.4"
::= { lldpXMedRemInventoryEntry 7 }
lldpXMedRemMfgName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific manufacturer name
as advertised by the remote endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.5"
::= { lldpXMedRemInventoryEntry 8 }
lldpXMedRemModelName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific model name
as advertised by the remote endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.6"
::= { lldpXMedRemInventoryEntry 9 }
lldpXMedRemAssetID OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific asset tracking identifier
as advertised by the remote endpoint."
REFERENCE
" ANSI/TIA-1057, Section 10.2.6.7"
::= { lldpXMedRemInventoryEntry 10 }
-- mgmtTelnetWebGroup OBJECT IDENTIFIER ::= { dlinkManagement 5 }
-- Telnet Web Group ------------------------------------------------------
telnetState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable management Telnetsetting mechanism."
::= { mgtTelnetWebGroup 1 }
telnetPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting telnet's UDP Port."
DEFVAL { 23 }
::= { mgtTelnetWebGroup 2 }
webState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for Enabled(1) or Disabled(2) Web state in the system."
::= { mgtTelnetWebGroup 3 }
webPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Web Server Port Number."
DEFVAL { 80 }
::= { mgtTelnetWebGroup 4 }
ddpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable DDP function."
::= { mgtDDPGroup 1 }
ddpReportTime OBJECT-TYPE
SYNTAX INTEGER {
never(0),
offset30sec (30),
offset60sec (60),
offset90sec (90),
offset120sec (120)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set DDP report time seconds."
DEFVAL { offset30sec }
::= { mgtDDPGroup 2 }
ddpTable OBJECT-TYPE
SYNTAX SEQUENCE OF DdpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define sysDDPTable for per port settings."
::= { mgtDDPGroup 3 }
ddpEntry OBJECT-TYPE
SYNTAX DdpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define sysDDPTable for per port settings."
INDEX { ddpPort }
::= { ddpTable 1 }
DdpEntry ::=
SEQUENCE {
ddpPort INTEGER,
ddpPortStatus INTEGER
}
ddpPort OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port index."
::= { ddpEntry 1 }
ddpPortStatus OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DDP status is enabled or disabled."
::= { ddpEntry 2 }
-- mgtRMONGroup OBJECT IDENTIFIER ::= { dlinkManagement 5 }
-- ----------------------------------------------------------------
-- The RMON group
-- ----------------------------------------------------------------
rmonRisingAlarmTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling RMON Rising Alarm Trap."
::= { mgtRMONGroup 1 }
rmonFallingAlarmTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling RMON function Falling Alarm Trap."
::= { mgtRMONGroup 2 }
rmonStatistics OBJECT IDENTIFIER ::= { mgtRMONGroup 3 }
rmonHistory OBJECT IDENTIFIER ::= { mgtRMONGroup 4 }
rmonAlarm OBJECT IDENTIFIER ::= { mgtRMONGroup 5 }
rmonEvent OBJECT IDENTIFIER ::= { mgtRMONGroup 6 }
-- The Ethernet Statistics Group
--
-- Implementation of the Ethernet Statistics group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The ethernet statistics group contains statistics measured by the
-- probe for each monitored interface on this device. These
-- statistics take the form of free running counters that start from
-- zero when a valid entry is created.
--
-- This group currently has statistics defined only for
-- Ethernet interfaces. Each etherStatsEntry contains statistics
-- for one Ethernet interface. The probe must create one
-- etherStats entry for each monitored Ethernet interface
-- on the device.
rmonStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Ethernet statistics entries."
::= { rmonStatistics 1 }
rmonStatsEntry OBJECT-TYPE
SYNTAX RmonStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named etherStatsPkts.1"
INDEX { rmonStatsIndex }
::= { rmonStatsTable 1 }
RmonStatsEntry ::= SEQUENCE {
rmonStatsIndex Integer32,
rmonStatsDataSource OBJECT IDENTIFIER,
rmonStatsOwner DisplayString,
rmonStatsOctets Counter32,
rmonStatsPkts Counter32,
rmonStatsBroadcastPkts Counter32,
rmonStatsMulticastPkts Counter32,
rmonStatsUndersizePkts Counter32,
rmonStatsOversizePkts Counter32,
rmonStatsFragments Counter32,
rmonStatsJabbers Counter32,
rmonStatsCRCErrors Counter32,
rmonStatsCollisions Counter32,
rmonStatsDropEvents Counter32,
rmonStatsPkts64Octets Counter32,
rmonStatsPkts65to127Octets Counter32,
rmonStatsPkts128to255Octets Counter32,
rmonStatsPkts256to511Octets Counter32,
rmonStatsPkts512to1023Octets Counter32,
rmonStatsPkts1024to1518Octets Counter32,
rmonStatsStatus RmonStatus
}
rmonStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this entry."
::= { rmonStatsEntry 1 }
rmonStatsDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the source of the data that
this etherStats entry is configured to analyze. This
source can be any ethernet interface on this device.
In order to identify a particular interface, this object
shall identify the instance of the ifIndex object,
defined in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
etherStatsStatus object is equal to valid(1)."
::= { rmonStatsEntry 2 }
rmonStatsOwner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { rmonStatsEntry 3 }
rmonStatsOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).
This object can be used as a reasonable estimate of
10-Megabit ethernet utilization. If greater precision is
desired, the etherStatsPkts and etherStatsOctets objects
should be sampled before and after a common interval. The
differences in the sampled values are Pkts and Octets,
respectively, and the number of seconds in the interval is
Interval. These values are used to calculate the Utilization
as follows:
Pkts * (9.6 + 6.4) + (Octets * .8)
Utilization = -------------------------------------
Interval * 10,000
The result of this equation is the value Utilization which
is the percent utilization of the ethernet segment on a
scale of 0 to 100 percent."
::= { rmonStatsEntry 4 }
rmonStatsPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad packets,
broadcast packets, and multicast packets) received."
::= { rmonStatsEntry 5 }
rmonStatsBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets received that were
directed to the broadcast address. Note that this
does not include multicast packets."
::= { rmonStatsEntry 6 }
rmonStatsMulticastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good packets received that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address."
::= { rmonStatsEntry 7 }
rmonStatsUndersizePkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed."
::= { rmonStatsEntry 8 }
rmonStatsOversizePkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed."
::= { rmonStatsEntry 9 }
rmonStatsFragments OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a
bad FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for etherStatsFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits."
::= { rmonStatsEntry 10 }
rmonStatsJabbers OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms."
::= { rmonStatsEntry 11 }
rmonStatsCRCErrors OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error)."
::= { rmonStatsEntry 12 }
rmonStatsCollisions OBJECT-TYPE
SYNTAX Counter32
UNITS "Collisions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
would.
Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions.
Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected."
::= { rmonStatsEntry 13 }
rmonStatsDropEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events in which packets
were dropped by the probe due to lack of resources.
Note that this number is not necessarily the number of
packets dropped; it is just the number of times this
condition has been detected."
::= { rmonStatsEntry 14 }
rmonStatsPkts64Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were 64 octets in length
(excluding framing bits but including FCS octets)."
::= { rmonStatsEntry 15 }
rmonStatsPkts65to127Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { rmonStatsEntry 16 }
rmonStatsPkts128to255Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { rmonStatsEntry 17 }
rmonStatsPkts256to511Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { rmonStatsEntry 18 }
rmonStatsPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { rmonStatsEntry 19 }
rmonStatsPkts1024to1518Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { rmonStatsEntry 20 }
rmonStatsStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this etherStats entry."
::= { rmonStatsEntry 21 }
-- The History Control Group
-- Implementation of the History Control group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The history control group controls the periodic statistical
-- sampling of data from various types of networks. The
-- historyControlTable stores configuration entries that each
-- define an interface, polling period, and other parameters.
-- Once samples are taken, their data is stored in an entry
-- in a media-specific table. Each such entry defines one
-- sample, and is associated with the historyControlEntry that
-- caused the sample to be taken. Each counter in the
-- etherHistoryEntry counts the same event as its similarly-named
-- counterpart in the etherStatsEntry, except that each value here
-- is a cumulative sum during a sampling period.
--
-- If the probe keeps track of the time of day, it should start
-- the first sample of the history at a time such that
-- when the next hour of the day begins, a sample is
-- started at that instant. This tends to make more
-- user-friendly reports, and enables comparison of reports
-- from different probes that have relatively accurate time
-- of day.
--
-- The probe is encouraged to add two history control entries
-- per monitored interface upon initialization that describe a short
-- term and a long term polling period. Suggested parameters are 30
-- seconds for the short term polling period and 30 minutes for
-- the long term period.
rmonHistoryControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonHistoryControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of history control entries."
::= { rmonHistory 1 }
rmonHistoryControlEntry OBJECT-TYPE
SYNTAX RmonHistoryControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that set up a periodic sampling of
statistics. As an example, an instance of the
historyControlInterval object might be named
historyControlInterval.2"
INDEX { rmonHistoryControlIndex }
::= { rmonHistoryControlTable 1 }
RmonHistoryControlEntry ::= SEQUENCE {
rmonHistoryControlIndex Integer32,
rmonHistoryControlDataSource OBJECT IDENTIFIER,
rmonHistoryControlBucketsRequested Integer32,
rmonHistoryControlBucketsGranted Integer32,
rmonHistoryControlInterval Integer32,
rmonHistoryControlOwner DisplayString,
rmonHistoryControlStatus RmonStatus
}
rmonHistoryControlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
historyControl table. Each such entry defines a
set of samples at a particular interval for an
interface on the device."
::= { rmonHistoryControlEntry 1 }
rmonHistoryControlDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
historyControlEntry. This source can be any
interface on this device. In order to identify
a particular interface, this object shall identify
the instance of the ifIndex object, defined
in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1)."
::= { rmonHistoryControlEntry 2 }
rmonHistoryControlBucketsRequested OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
historyControlEntry.
When this object is created or modified, the probe
should set historyControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources."
DEFVAL { 50 }
::= { rmonHistoryControlEntry 3 }
rmonHistoryControlBucketsGranted OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
historyControlEntry.
When the associated historyControlBucketsRequested
object is created or modified, the probe
should set this object as closely to the requested
value as is possible for the particular
probe implementation and available resources. The
probe must not lower this value except as a result
of a modification to the associated
historyControlBucketsRequested object.
There will be times when the actual number of
buckets associated with this entry is less than
the value of this object. In this case, at the
end of each sampling interval, a new bucket will
be added to the media-specific table.
When the number of buckets reaches the value of
this object and a new bucket is to be added to the
media-specific table, the oldest bucket associated
with this historyControlEntry shall be deleted by
the agent so that the new bucket can be added.
When the value of this object changes to a value less
than the current value, entries are deleted
from the media-specific table associated with this
historyControlEntry. Enough of the oldest of these
entries shall be deleted by the agent so that their
number remains less than or equal to the new value of
this object.
When the value of this object changes to a value greater
than the current value, the number of associated media-
specific entries may be allowed to grow."
::= { rmonHistoryControlEntry 4 }
rmonHistoryControlInterval OBJECT-TYPE
SYNTAX Integer32 (1..3600)
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
historyControlEntry. This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager will
take into account the possibility of overflow in any of
the associated counters. It is important to consider the
minimum time in which any counter could overflow on a
particular media type and set the historyControlInterval
object to a value less than this interval. This is
typically most important for the 'octets' counter in any
media-specific table. For example, on an Ethernet
network, the etherHistoryOctets counter could overflow
in about one hour at the Ethernet's maximum
utilization.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1)."
DEFVAL { 1800 }
::= { rmonHistoryControlEntry 5 }
rmonHistoryControlOwner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { rmonHistoryControlEntry 6 }
rmonHistoryControlStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this historyControl entry.
Each instance of the media-specific table associated
with this historyControlEntry will be deleted by the agent
if this historyControlEntry is not equal to valid(1)."
::= { rmonHistoryControlEntry 7 }
-- The Ethernet History Group
-- Implementation of the Ethernet History group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The Ethernet History group records periodic statistical samples
-- from a network and stores them for later retrieval.
-- Once samples are taken, their data is stored in an entry
-- in a media-specific table. Each such entry defines one
-- sample, and is associated with the historyControlEntry that
-- caused the sample to be taken. This group defines the
-- etherHistoryTable, for Ethernet networks.
--
rmonHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Ethernet history entries."
::= { rmonHistory 2 }
rmonHistoryEntry OBJECT-TYPE
SYNTAX RmonHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An historical sample of Ethernet statistics on a particular
Ethernet interface. This sample is associated with the
historyControlEntry which set up the parameters for
a regular collection of these samples. As an example, an
instance of the etherHistoryPkts object might be named
etherHistoryPkts.2.89"
INDEX { rmonHistoryIndex , rmonHistorySampleIndex }
::= { rmonHistoryTable 1 }
RmonHistoryEntry ::= SEQUENCE {
rmonHistoryIndex Integer32,
rmonHistorySampleIndex Integer32,
rmonHistoryOctets Counter32,
rmonHistoryPkts Counter32,
rmonHistoryBroadcastPkts Counter32,
rmonHistoryMulticastPkts Counter32,
rmonHistoryUtilization Integer32,
rmonHistoryUndersizePkts Counter32,
rmonHistoryOversizePkts Counter32,
rmonHistoryFragments Counter32,
rmonHistoryJabbers Counter32,
rmonHistoryCRCErrors Counter32,
rmonHistoryCollisions Counter32,
rmonHistoryDropEvents Counter32
}
rmonHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The history of which this entry is a part. The
history identified by a particular value of this
index is the same history as identified
by the same value of historyControlIndex."
::= { rmonHistoryEntry 1 }
rmonHistorySampleIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same historyControlEntry.
This index starts at 1 and increases by one
as each new sample is taken."
::= { rmonHistoryEntry 2 }
rmonHistoryOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets)."
::= { rmonHistoryEntry 3 }
rmonHistoryPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets (including bad packets)
received during this sampling interval."
::= { rmonHistoryEntry 4 }
rmonHistoryBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets received during this
sampling interval that were directed to the
broadcast address."
::= { rmonHistoryEntry 5 }
rmonHistoryMulticastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good packets received during this
sampling interval that were directed to a
multicast address. Note that this number does not
include packets addressed to the broadcast address."
::= { rmonHistoryEntry 6 }
rmonHistoryUtilization OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent."
::= { rmonHistoryEntry 7 }
rmonHistoryUndersizePkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received during this
sampling interval that were less than 64 octets
long (excluding framing bits but including FCS
octets) and were otherwise well formed."
::= { rmonHistoryEntry 8 }
rmonHistoryOversizePkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received during this
sampling interval that were longer than 1518
octets (excluding framing bits but including
FCS octets) but were otherwise well formed."
::= { rmonHistoryEntry 9 }
rmonHistoryFragments OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received during this
sampling interval that were less than 64 octets in
length (excluding framing bits but including FCS
octets) had either a bad Frame Check Sequence (FCS)
with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for rmonHistoryFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits."
::= { rmonHistoryEntry 10 }
rmonHistoryJabbers OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received during this
sampling interval that were longer than 1518 octets
(excluding framing bits but including FCS octets),
and had either a bad Frame Check Sequence (FCS)
with an integral number of octets (FCS Error) or
a bad FCS with a non-integral number of octets
(Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms."
::= { rmonHistoryEntry 11 }
rmonHistoryCRCErrors OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received during this
sampling interval that had a length (excluding
framing bits but including FCS octets) between
64 and 1518 octets, inclusive, but had either a bad Frame
Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number
of octets (Alignment Error)."
::= { rmonHistoryEntry 12 }
rmonHistoryCollisions OBJECT-TYPE
SYNTAX Counter32
UNITS "Collisions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the total number of collisions
on this Ethernet segment during this sampling
interval.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
would.
Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions.
Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected."
::= { rmonHistoryEntry 13 }
rmonHistoryDropEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events in which packets
were dropped by the probe due to lack of resources
during this sampling interval. Note that this number
is not necessarily the number of packets dropped, it
is just the number of times this condition has been
detected."
::= { rmonHistoryEntry 14 }
-- The Alarm Group
-- Implementation of the Alarm group is optional. The Alarm Group
-- requires the implementation of the Event group.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The Alarm group periodically takes statistical samples from
-- variables in the probe and compares them to thresholds that have
-- been configured. The alarm table stores configuration
-- entries that each define a variable, polling period, and
-- threshold parameters. If a sample is found to cross the
-- threshold values, an event is generated. Only variables that
-- resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32,
-- Counter32, Counter64, Gauge32, or TimeTicks) may be monitored in
-- this way.
--
-- This function has a hysteresis mechanism to limit the generation
-- of events. This mechanism generates one event as a threshold
-- is crossed in the appropriate direction. No more events are
-- generated for that threshold until the opposite threshold is
-- crossed.
--
-- In the case of a sampling a deltaValue, a probe may implement
-- this mechanism with more precision if it takes a delta sample
-- twice per period, each time comparing the sum of the latest two
-- samples to the threshold. This allows the detection of threshold
-- crossings that span the sampling boundary. Note that this does
-- not require any special configuration of the threshold value.
-- It is suggested that probes implement this more precise algorithm.
rmonAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of alarm entries."
::= { rmonAlarm 1 }
rmonAlarmEntry OBJECT-TYPE
SYNTAX RmonAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8"
INDEX { rmonAlarmIndex }
::= { rmonAlarmTable 1 }
RmonAlarmEntry ::= SEQUENCE {
rmonAlarmIndex Integer32,
rmonAlarmInterval Integer32,
rmonAlarmVariable OBJECT IDENTIFIER,
rmonAlarmSampleType INTEGER,
rmonAlarmValue Integer32,
rmonAlarmStartupAlarm INTEGER,
rmonAlarmRisingThreshold Integer32,
rmonAlarmFallingThreshold Integer32,
rmonAlarmRisingEventNumber Integer32,
rmonAlarmFallingEventNumber Integer32,
rmonAlarmOwner DisplayString,
rmonAlarmStatus RmonStatus
}
rmonAlarmIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device."
::= { rmonAlarmEntry 1 }
rmonAlarmInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be set short enough
that the sampled variable is very unlikely to
increase or decrease by more than 2^31 - 1 during
a single sampling interval.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 2 }
rmonAlarmVariable OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
Because SNMP access control is articulated entirely
in terms of the contents of MIB views, no access
control mechanism exists that can restrict the value of
this object to identify only those objects that exist
in a particular MIB view. Because there is thus no
acceptable means of restricting the read access that
could be obtained through the alarm mechanism, the
probe must only grant write access to this object in
those views that have read access to all objects on
the probe.
During a set operation, if the supplied variable name is
not available in the selected MIB view, a badValue error
must be returned. If at any time the variable name of
an established alarmEntry is no longer available in the
selected MIB view, the probe must change the status of
this alarmEntry to invalid(4).
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 3 }
rmonAlarmSampleType OBJECT-TYPE
SYNTAX INTEGER {
absoluteValue(1),
deltaValue(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directly with the thresholds at the
end of the sampling interval. If the value of this
object is deltaValue(2), the value of the selected
variable at the last sample will be subtracted from
the current value, and the difference compared with
the thresholds.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 4 }
rmonAlarmValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the statistic during the last sampling
period. For example, if the sample type is deltaValue,
this value will be the difference between the samples
at the beginning and end of the period. If the sample
type is absoluteValue, this value will be the sampled
value at the end of the period.
This is the value that is compared with the rising and
falling thresholds.
The value during the current sampling period is not
made available until the period is completed and will
remain available until the next period completes."
::= { rmonAlarmEntry 5 }
rmonAlarmStartupAlarm OBJECT-TYPE
SYNTAX INTEGER {
risingAlarm(1),
fallingAlarm(2),
risingOrFallingAlarm(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStartupAlarm is equal to
risingAlarm(1) or risingOrFallingAlarm(3), then a single
rising alarm will be generated. If the first sample
after this entry becomes valid is less than or equal
to the fallingThreshold and alarmStartupAlarm is equal
to fallingAlarm(2) or risingOrFallingAlarm(3), then a
single falling alarm will be generated.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 6 }
rmonAlarmRisingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is greater than or
equal to this threshold and the associated
alarmStartupAlarm is equal to risingAlarm(1) or
risingOrFallingAlarm(3).
After a rising event is generated, another such event
will not be generated until the sampled value
falls below this threshold and reaches the
alarmFallingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 7 }
rmonAlarmFallingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is less than or
equal to this threshold and the associated
alarmStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingAlarm(3).
After a falling event is generated, another such event
will not be generated until the sampled value
rises above this threshold and reaches the
alarmRisingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 8 }
rmonAlarmRisingEventNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 9 }
rmonAlarmFallingEventNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 10 }
rmonAlarmOwner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { rmonAlarmEntry 11 }
rmonAlarmStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this alarm entry."
::= { rmonAlarmEntry 12 }
-- The Event Group
-- Implementation of the Event group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The Event group controls the generation and notification
-- of events from this device. Each entry in the eventTable
-- describes the parameters of the event that can be triggered.
-- Each event entry is fired by an associated condition located
-- elsewhere in the MIB. An event entry may also be associated
-- with a function elsewhere in the MIB that will be executed
-- when the event is generated. For example, a channel may
-- be turned on or off by the firing of an event.
--
-- Each eventEntry may optionally specify that a log entry
-- be created on its behalf whenever the event occurs.
-- Each entry may also specify that notification should
-- occur by way of SNMP trap messages. In this case, the
-- community for the trap message is given in the associated
-- eventCommunity object. The enterprise and specific trap
-- fields of the trap are determined by the condition that
-- triggered the event. Two traps are defined: risingAlarm and
-- fallingAlarm. If the eventTable is triggered by a condition
-- specified elsewhere, the enterprise and specific trap fields
-- must be specified for traps generated for that condition.
rmonEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of events to be generated."
::= { rmonEvent 1 }
rmonEventEntry OBJECT-TYPE
SYNTAX RmonEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of parameters that describe an event to be generated
when certain conditions are met. As an example, an instance
of the eventLastTimeSent object might be named
eventLastTimeSent.6"
INDEX { rmonEventIndex }
::= { rmonEventTable 1 }
RmonEventEntry ::= SEQUENCE {
rmonEventIndex Integer32,
rmonEventDescription DisplayString,
rmonEventType INTEGER,
rmonEventCommunity DisplayString,
rmonEventOwner DisplayString,
rmonEventStatus RmonStatus,
rmonEventLastTimeSent TimeTicks
}
rmonEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
event table. Each such entry defines one event that
is to be generated when the appropriate conditions
occur."
::= { rmonEventEntry 1 }
rmonEventDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A comment describing this event entry."
::= { rmonEventEntry 2 }
rmonEventType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
log(2),
snmptrap(3), -- send an SNMP trap
logandtrap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of notification that the probe will make
about this event. In the case of log, an entry is
made in the log table for each event. In the case of
snmp-trap, an SNMP trap is sent to one or more
management stations."
::= { rmonEventEntry 3 }
rmonEventCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If an SNMP trap is to be sent, it will be sent to
the SNMP community specified by this octet string."
::= { rmonEventEntry 4 }
rmonEventOwner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it.
If this object contains a string starting with 'monitor'
and has associated entries in the log table, all connected
management stations should retrieve those log entries,
as they may have significance to all management stations
connected to this device"
::= { rmonEventEntry 5 }
rmonEventStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this event entry.
If this object is not equal to valid(1), all associated
log entries shall be deleted by the agent."
::= { rmonEventEntry 6 }
rmonEventLastTimeSent OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time this event
entry last generated an event. If this entry has
not generated any events, this value will be
zero."
::= { rmonEventEntry 7 }
--
rmonLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of events that have been logged."
::= { rmonEvent 2 }
rmonLogEntry OBJECT-TYPE
SYNTAX RmonLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of data describing an event that has been
logged. For example, an instance of the logDescription
object might be named logDescription.6.47"
INDEX { rmonLogEventIndex,rmonLogIndex }
::= { rmonLogTable 1 }
RmonLogEntry ::= SEQUENCE {
rmonLogEventIndex Integer32,
rmonLogIndex Integer32,
rmonLogTime TimeTicks,
rmonLogDescription DisplayString
}
rmonLogEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The event entry that generated this log
entry. The log identified by a particular
value of this index is associated with the same
eventEntry as identified by the same value
of eventIndex."
::= { rmonLogEntry 1 }
rmonLogIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry
in the log table amongst those generated by the
same eventEntries. These indexes are
assigned beginning with 1 and increase by one
with each new log entry. The association
between values of logIndex and logEntries
is fixed for the lifetime of each logEntry.
The agent may choose to delete the oldest
instances of logEntry as required because of
lack of memory. It is an implementation-specific
matter as to when this deletion may occur."
::= { rmonLogEntry 2 }
rmonLogTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this log entry was created."
::= { rmonLogEntry 3 }
rmonLogDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An implementation dependent description of the
event that activated this log entry."
::= { rmonLogEntry 4 }
--sysTrafficSegmentation OBJECT IDENTIFIER ::= { companySecurity 9}
--
-- Port Map Table
--
trafficSegmentationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrafficSegmentationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel"
::= { securityTrafficSegmentationGroup 1 }
trafficSegmentationEntry OBJECT-TYPE
SYNTAX TrafficSegmentationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created
port-channel port"
INDEX { trafficSegmentationIfIndex }
::= { trafficSegmentationTable 1 }
TrafficSegmentationEntry ::=
SEQUENCE {
trafficSegmentationIfIndex InterfaceIndex,
trafficSegmentationMemberList PortList
}
trafficSegmentationIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the port-channel(Aggregator's
interface index). "
::= { trafficSegmentationEntry 1 }
trafficSegmentationMemberList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port list of port channel."
::= { trafficSegmentationEntry 2 }
doSCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF DoSCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that holds the DoS prevention settings of the device."
::= { securityDoSprevGroup 1 }
doSCtrlEntry OBJECT-TYPE
SYNTAX DoSCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of DoS prevention settings of the device."
INDEX { doSCtrlType }
::= { doSCtrlTable 1 }
DoSCtrlEntry ::=
SEQUENCE {
doSCtrlType INTEGER,
doSCtrlState INTEGER,
doSCtrlActionType INTEGER
}
doSCtrlType OBJECT-TYPE
SYNTAX INTEGER {
land-attack(1),
blat-attack(2),
tcp-null-scan(3),
tcp-xmascan(4),
tcp-synfin(5),
tcp-syn-srcport-less-1024(6),
ping-of-death-attack(7),
tcp-tiny-fragment-attack(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the DoS prevention type."
::= { doSCtrlEntry 1 }
doSCtrlState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the DoS prevention type."
::= { doSCtrlEntry 2 }
doSCtrlActionType OBJECT-TYPE
SYNTAX INTEGER {
drop(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the action for the DoS prevention type.
If this object is set to 'mirror' and DoSCtrlState is set to 'enable', the configuration
will not take effect until a valid mirror port is specified. If mirror port is not valid
the behavior will be the same as 'drop'"
::= { doSCtrlEntry 3 }
safeGuardEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set Safeguard Enable/Disable."
::= { securitySafeGuardGroup 1 }
arpAgingTime OBJECT IDENTIFIER ::= { l3ARPGroup 1 }
arpARPTable OBJECT IDENTIFIER ::= { l3ARPGroup 2 }
-- arpProxyARP OBJECT IDENTIFIER ::= { l3ARPGroup 3 }
-- ----------------------------------------------------------------
-- ARP Aging Time
-- ----------------------------------------------------------------
arpAgingTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpAgingTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ARP Aging Time."
::= { arpAgingTime 1 }
arpAgingTimeEntry OBJECT-TYPE
SYNTAX ArpAgingTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of snmp view tree entry."
INDEX { arpAgingTimeIntrefaceID }
::= { arpAgingTimeTable 1 }
ArpAgingTimeEntry ::= SEQUENCE
{
arpAgingTimeIntrefaceID Integer32,
arpAgingTimeTimeout Integer32
}
arpAgingTimeIntrefaceID OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { arpAgingTimeEntry 1 }
arpAgingTimeTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ARP Aging Time Timeout (min)."
::= { arpAgingTimeEntry 2 }
-- ----------------------------------------------------------------
-- ARP Table
-- ----------------------------------------------------------------
arpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control ARP Spoofing prevention for the entire
switch or for each interface in the switch."
::= { arpARPTable 1 }
arpEntry OBJECT-TYPE
SYNTAX ARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { arpIntrefaceID,
arpIpAddr}
::= { arpTable 1 }
ARPEntry ::=
SEQUENCE {
arpIntrefaceID Integer32,
arpIpAddr IpAddress,
arpMacAddress MacAddress,
arpType INTEGER,
arpRowStatus RowStatus
}
arpIntrefaceID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Proxy ARP VLAN Interface."
::= { arpEntry 1 }
arpIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'."
::= { arpEntry 2 }
arpMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet Mac Address."
::= { arpEntry 3 }
arpType OBJECT-TYPE
SYNTAX INTEGER{
other (1),
invalid (2),
dynamic (3),
static (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ARP Table Type."
::= { arpEntry 4 }
arpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ARP Table RowStatus."
::= { arpEntry 5 }
-- ---------------------------------------------------------------------
-- Power Saving
-- ---------------------------------------------------------------------
powerSavingGlobalSettings OBJECT IDENTIFIER ::= { dlinkPowersavingGroup 1 }
powerSavingTimeRangeSettings OBJECT IDENTIFIER ::= { dlinkPowersavingGroup 2 }
powerSavingShutdownSettings OBJECT IDENTIFIER ::= { dlinkPowersavingGroup 3 }
-- ---------------------------------------------------------------------
-- Power Saving Global Settings
-- ---------------------------------------------------------------------
psgFunctionVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power Saving Global Settings Function Version."
::= { powerSavingGlobalSettings 1}
psgScheduledPortShutdown OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Scheduled Port-shutdown Power Saving."
DEFVAL { disabled }
::= { powerSavingGlobalSettings 2 }
psgScheduledHibernation OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Scheduled Hibernation Power Saving."
DEFVAL { disabled }
::= { powerSavingGlobalSettings 3 }
psgScheduledDimLED OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Scheduled Dim-LED Power Saving."
DEFVAL { disabled }
::= { powerSavingGlobalSettings 4 }
psgAdministrativeDimLED OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative Dim-LED."
DEFVAL { disabled }
::= { powerSavingGlobalSettings 5 }
-- ---------------------------------------------------------------------
-- Time Range Settings
-- ---------------------------------------------------------------------
psgDimLEDShutOffTimeProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time profile name associated with the Schedule entry (e.g., `abc, bbb')."
::= { powerSavingTimeRangeSettings 1}
psgHibernationTimeProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time profile name associated with the Schedule entry (e.g., `abc, bbb')."
::= { powerSavingTimeRangeSettings 2}
-- ---------------------------------------------------------------------
-- Power Saving Shutdown Settings
-- ---------------------------------------------------------------------
powerSavingShutdownTable OBJECT-TYPE
SYNTAX SEQUENCE OF PowerSavingShutdownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Power Saving Shutdown."
::= { powerSavingShutdownSettings 1 }
powerSavingShutdownEntry OBJECT-TYPE
SYNTAX PowerSavingShutdownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of Power Saving Shutdown entry."
INDEX { psShutdownPort }
::= { powerSavingShutdownTable 1 }
PowerSavingShutdownEntry ::= SEQUENCE {
psShutdownPort Integer32,
psShutdownTimeRange DisplayString
}
psShutdownPort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNMP Linkchange Trap Settings."
::= { powerSavingShutdownEntry 1 }
psShutdownTimeRange OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time Range Settings Name."
::= { powerSavingShutdownEntry 2}
-- ------------------------------------------------------------------
-- EEE Table
-- ------------------------------------------------------------------
greenEeeTable OBJECT-TYPE
SYNTAX SEQUENCE OF GreenEeeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port eee table."
::= { dlinkEEEGroup 1 }
greenEeeEntry OBJECT-TYPE
SYNTAX GreenEeeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port eee entry."
INDEX { eeePort }
::= { greenEeeTable 1 }
GreenEeeEntry ::= SEQUENCE {
eeePort Integer32,
eeestate INTEGER
}
eeePort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port index."
::= { greenEeeEntry 1 }
eeestate OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port eee state."
::= { greenEeeEntry 2 }
portSecurityGlobalSettings OBJECT IDENTIFIER ::= { securityportSecurityGroup 1 }
portSecurityPortSettings OBJECT IDENTIFIER ::= { securityportSecurityGroup 2 }
portSecurityAddressEntries OBJECT IDENTIFIER ::= { securityportSecurityGroup 3 }
portSecurityTraps OBJECT IDENTIFIER ::= { securityportSecurityGroup 4 }
-- ----------------------------------------------------------
-- Port Security Global Settings
-- ----------------------------------------------------------
portSecurityTrapState OBJECT-TYPE
SYNTAX BITS {
portSecExceedMLA(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object is used to enbale or disable the transmission of trap notification
messages. A vector of Boolean notification types, used to enable or disable the
client notification types:
PortSecExceedMLA(0)
When the bit 'PortSecExceedMLA(0)' is set, a trap will be send out
when learnt mac entries exceed the Max learning number for the specific
port ."
::= { portSecurityGlobalSettings 1 }
portSecurityTrapRate OBJECT-TYPE
SYNTAX Integer32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Security Trap Rate Settings. Trap Rate (0-1000)"
::= { portSecurityGlobalSettings 2 }
portSecuritySysMaxAddr OBJECT-TYPE
SYNTAX Integer32 (1..6656)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Security System Settings. Trap Rate System Maximum Address (1-6656)"
::= { portSecurityGlobalSettings 3 }
-- ----------------------------------------------------------
-- Port Security Port Settings
-- ----------------------------------------------------------
portSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Security Port Settings table."
::= { portSecurityPortSettings 1 }
portSecurityEntry OBJECT-TYPE
SYNTAX PortSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Security Port Settings entry."
INDEX { portSecurityPort }
::= { portSecurityTable 1 }
PortSecurityEntry ::= SEQUENCE {
portSecurityPort Integer32,
portSecurityState INTEGER,
portSecuritySysMax Integer32,
portSecurityVioAction INTEGER,
portSecuritySecurMode INTEGER,
portSecurityAgingTime Integer32,
portSecurityAgingType INTEGER,
portSecurityCurrentNo Integer32,
portSecurityVioCount Integer32,
portSecurityCurState INTEGER
}
portSecurityPort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port index."
::= { portSecurityEntry 1 }
portSecurityState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Port Security Port Settings state."
::= { portSecurityEntry 2 }
portSecuritySysMax OBJECT-TYPE
SYNTAX Integer32 (1..6656)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Security Port Settings. Maximum (1-6656)"
::= { portSecurityEntry 3 }
portSecurityVioAction OBJECT-TYPE
SYNTAX INTEGER {
protect (1),
restrict (2),
shutdown (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Security Port Settings. Violation Action"
::= { portSecurityEntry 4 }
portSecuritySecurMode OBJECT-TYPE
SYNTAX INTEGER {
deleteOnTimeout (2),
permanent (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Security Port Settings. Security Mode
permanent(1) - Under this mode all learned MAC addresses won't be
purged unless a user deletes these entries manually.
deleteOnTimeout(2) - Under this mode all learned MAC addresses
will be purged when an entry ages out or a user deletes
these entries manually."
::= { portSecurityEntry 5 }
portSecurityAgingTime OBJECT-TYPE
SYNTAX Integer32 (1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Security Port Settings. Aging Time (0-1440)"
::= { portSecurityEntry 6 }
portSecurityAgingType OBJECT-TYPE
SYNTAX INTEGER {
absolute (1),
inactivity (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Security Port Settings. Aging Type."
::= { portSecurityEntry 7 }
portSecurityCurrentNo OBJECT-TYPE
SYNTAX Integer32 (1..1440)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Security Port Settings. Current No."
::= { portSecurityEntry 8 }
portSecurityVioCount OBJECT-TYPE
SYNTAX Integer32 (1..1440)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Security Port Settings. Violation Count."
::= { portSecurityEntry 9 }
portSecurityCurState OBJECT-TYPE
SYNTAX INTEGER {
other (0),
forwarding (1),
err-disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Security Port Settings. Current State."
::= { portSecurityEntry 10 }
-- ----------------------------------------------------------
-- Port Security Address Entries
-- ----------------------------------------------------------
portSecAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecurityAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Security Address Entries table."
::= { portSecurityAddressEntries 1 }
portSecAddrEntry OBJECT-TYPE
SYNTAX PortSecurityAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Security Address Entries entry."
INDEX { portSecAddrVID, portSecAddrMAC }
::= { portSecAddrTable 1 }
PortSecurityAddrEntry ::= SEQUENCE {
portSecAddrVID Unsigned32,
portSecAddrMAC MacAddress,
portSecAddrPort Integer32,
portSecAddrType INTEGER,
portSecAddrRowStatus RowStatus,
portSecAddrRemainTime Integer32
}
portSecAddrVID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Security Address Entries . VID."
::= { portSecAddrEntry 1 }
portSecAddrMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Security Address Entries. MAC Address"
::= { portSecAddrEntry 2 }
portSecAddrPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port index."
::= { portSecAddrEntry 3 }
portSecAddrType OBJECT-TYPE
SYNTAX INTEGER {
deleteOnTimeout (2),
permanent (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the secure mode.
For manually configured secure MAC addresses, the portSecAddrType is
permanent."
::= { portSecAddrEntry 4 }
portSecAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the port security mac table entry RowStatus."
::= { portSecAddrEntry 5 }
portSecAddrRemainTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Security Address Entries. Remaining Time (mins)."
::= { portSecAddrEntry 6 }
-- ----------------------------------------------------------
-- Port Security trap
-- ----------------------------------------------------------
portSecurityTrapList OBJECT IDENTIFIER ::= { portSecurityTraps 0 }
portSecurityViolation NOTIFICATION-TYPE
OBJECTS {
portSecurityPort,
portSecurityVioCount
}
STATUS current
DESCRIPTION
"This is a trap that will send to snmp manager,and it will be generated when the learnt mac entries num exceed the MLA of
the specific port when port security is enable for this port ."
::= {portSecurityTrapList 1 }
-- -------------------------------------------------------------
-- groups in the Pnac MIB
-- -------------------------------------------------------------
pnacGlobalSettings OBJECT IDENTIFIER ::= { securityPnacGroup 1 }
pnacPortSettings OBJECT IDENTIFIER ::= { securityPnacGroup 2 }
pnacAuthSessionInfo OBJECT IDENTIFIER ::= { securityPnacGroup 3 }
pnacAuthStatistics OBJECT IDENTIFIER ::= { securityPnacGroup 4 }
pnacAuthSessionStatistics OBJECT IDENTIFIER ::= { securityPnacGroup 5 }
pnacAuthDiagnostics OBJECT IDENTIFIER ::= { securityPnacGroup 6 }
-- -----------------------------------------------------------------------------
-- pnacGlobalSettings
-- -----------------------------------------------------------------------------
pnacState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable 802.1x function."
::= { pnacGlobalSettings 1 }
pnacTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable 802.1x trap function."
::= { pnacGlobalSettings 2 }
-- -------------------------------------------------------------
-- pnacPortSettings
-- -------------------------------------------------------------
pnacPortSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnacPortSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port."
::= { pnacPortSettings 1 }
pnacPortSettingsEntry OBJECT-TYPE
SYNTAX PnacPortSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { pnacPortNumber }
::= { pnacPortSettingsTable 1 }
PnacPortSettingsEntry ::= SEQUENCE {
pnacPortNumber Integer32,
pnacDirection INTEGER,
pnacPortControl INTEGER,
pnacForwardPDU INTEGER,
pnacMaxReq Unsigned32,
pnacPAEAuthenticator INTEGER,
pnacServerTimeout Unsigned32,
pnacSuppTimeout Unsigned32,
pnacTxPeriod Unsigned32,
pnacAuthStatsClear INTEGER,
pnacAuthSessStatsClear INTEGER,
pnacAuthDiagClear INTEGER
}
pnacPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value for each port that correlates to port index."
::= { pnacPortSettingsEntry 1 }
pnacDirection OBJECT-TYPE
SYNTAX INTEGER {
both(0),
in(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pnac port controlled direction."
::= { pnacPortSettingsEntry 2 }
pnacPortControl OBJECT-TYPE
SYNTAX INTEGER {
forceUnauthorized(1),
auto(2),
forceAuthorized(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current value of the controlled Port
control parameter for the Port."
::= { pnacPortSettingsEntry 3 }
pnacForwardPDU OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable 802.1x forward PDU function."
::= { pnacPortSettingsEntry 4 }
pnacMaxReq OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the maxReq constant currently in use by
the Backend Authentication state machine."
DEFVAL { 2 }
::= { pnacPortSettingsEntry 5 }
pnacPAEAuthenticator OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current value of the controlled Port
control parameter for the Port."
::= { pnacPortSettingsEntry 6 }
pnacServerTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the serverTimeout constant
currently in use by the Backend Authentication state
machine."
DEFVAL { 30 }
::= { pnacPortSettingsEntry 7 }
pnacSuppTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the suppTimeout constant
currently in use by the Backend Authentication state
machine."
DEFVAL { 30 }
::= { pnacPortSettingsEntry 8 }
pnacTxPeriod OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the txPeriod constant
currently in use by the Authenticator PAE state
machine."
DEFVAL { 30 }
::= { pnacPortSettingsEntry 9 }
pnacAuthStatsClear OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used for authenticator statistics information clear."
::= { pnacPortSettingsEntry 10 }
pnacAuthSessStatsClear OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used for authenticator session statistics information clear."
::= { pnacPortSettingsEntry 11 }
pnacAuthDiagClear OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used for authenticator diagnostics information clear."
::= { pnacPortSettingsEntry 12 }
-- -------------------------------------------------------------
-- pnacAuthSessionInfo
-- -------------------------------------------------------------
-- Port-Based Authentication
----------------------------------------------------------------
pnacPortAuthSessionInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnacPortAuthSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the authentication session information for each port."
::= { pnacAuthSessionInfo 1 }
pnacPortAuthSessionInfoEntry OBJECT-TYPE
SYNTAX PnacPortAuthSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The authentication session information for an Authenticator Port."
INDEX { pnacPortAuthPortNumber }
::= { pnacPortAuthSessionInfoTable 1 }
PnacPortAuthSessionInfoEntry ::= SEQUENCE {
pnacPortAuthPortNumber Integer32,
pnacPortAuthMac MacAddress,
pnacPortAuthPortInit INTEGER,
pnacPortAuthPortReauth INTEGER
}
pnacPortAuthPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each port that correlates to port index."
::= { pnacPortAuthSessionInfoEntry 1 }
pnacPortAuthMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the supplicant."
::= { pnacPortAuthSessionInfoEntry 2 }
pnacPortAuthPortInit OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initialization control for this Port."
::= { pnacPortAuthSessionInfoEntry 3 }
pnacPortAuthPortReauth OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reauthentication control for this port."
::= { pnacPortAuthSessionInfoEntry 4 }
-- -------------------------------------------------------------
-- MAC-Based Authentication
----------------------------------------------------------------
pnacMacAuthSessionInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnacMacAuthSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the authentication session information for each mac auth session."
::= { pnacAuthSessionInfo 2 }
pnacMacAuthSessionInfoEntry OBJECT-TYPE
SYNTAX PnacMacAuthSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The authentication session information for each mac auth session."
INDEX { pnacMacAuthMacAddr }
::= { pnacMacAuthSessionInfoTable 1 }
PnacMacAuthSessionInfoEntry ::= SEQUENCE {
pnacMacAuthMacAddr MacAddress,
pnacMacAuthPortNumber Integer32,
pnacMacAuthInit INTEGER,
pnacMacAuthReauth INTEGER
}
pnacMacAuthMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the supplicant."
::= { pnacMacAuthSessionInfoEntry 1 }
pnacMacAuthPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port index concerned with mac authentication."
::= { pnacMacAuthSessionInfoEntry 2 }
pnacMacAuthInit OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initialization control for this mac auth session."
::= { pnacMacAuthSessionInfoEntry 3 }
pnacMacAuthReauth OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reauthentication control for this mac auth session."
::= { pnacMacAuthSessionInfoEntry 4 }
-- -------------------------------------------------------------
-- pnacAuthStatistics
-- -------------------------------------------------------------
-- Port-Based Authentication
----------------------------------------------------------------
pnacPortAuthStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnacPortAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the statistics objects for the
Authenticator PAE associated with each Port."
::= { pnacAuthStatistics 1 }
pnacPortAuthStatsEntry OBJECT-TYPE
SYNTAX PnacPortAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics information for an Authenticator PAE."
INDEX { pnacPortAuthStatsPortNumber }
::= { pnacPortAuthStatsTable 1 }
PnacPortAuthStatsEntry ::=
SEQUENCE {
pnacPortAuthStatsPortNumber
Integer32,
pnacPortAuthEapolFramesRx
Counter32,
pnacPortAuthEapolFramesTx
Counter32,
pnacPortAuthEapolStartFramesRx
Counter32,
pnacPortAuthEapolLogoffFramesRx
Counter32,
pnacPortAuthEapolRespIdFramesRx
Counter32,
pnacPortAuthEapolRespFramesRx
Counter32,
pnacPortAuthEapolReqIdFramesTx
Counter32,
pnacPortAuthEapolReqFramesTx
Counter32,
pnacPortAuthInvalidEapolFramesRx
Counter32,
pnacPortAuthEapLengthErrorFramesRx
Counter32,
pnacPortAuthLastEapolFrameVersion
Unsigned32,
pnacPortAuthLastEapolFrameSource
MacAddress
}
pnacPortAuthStatsPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each port that correlates to port index."
::= { pnacPortAuthStatsEntry 1 }
pnacPortAuthEapolFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL frames of any type
that have been received by this Authenticator."
::= { pnacPortAuthStatsEntry 2 }
pnacPortAuthEapolFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames of any type
that have been transmitted by this Authenticator."
::= { pnacPortAuthStatsEntry 3 }
pnacPortAuthEapolStartFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Start frames that have
been received by this Authenticator."
::= { pnacPortAuthStatsEntry 4 }
pnacPortAuthEapolLogoffFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Logoff frames that have
been received by this Authenticator."
::= { pnacPortAuthStatsEntry 5 }
pnacPortAuthEapolRespIdFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Resp/Id frames that have
been received by this Authenticator."
::= { pnacPortAuthStatsEntry 6 }
pnacPortAuthEapolRespFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAP Response frames
(other than Resp/Id frames) that have been
received by this Authenticator."
::= { pnacPortAuthStatsEntry 7 }
pnacPortAuthEapolReqIdFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Req/Id frames that have been
transmitted by this Authenticator."
::= { pnacPortAuthStatsEntry 8 }
pnacPortAuthEapolReqFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Request frames
(other than Rq/Id frames) that have been
transmitted by this Authenticator."
::= { pnacPortAuthStatsEntry 9 }
pnacPortAuthInvalidEapolFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been
received by this Authenticator in which the
frame type is not recognized."
::= { pnacPortAuthStatsEntry 10 }
pnacPortAuthEapLengthErrorFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received
by this Authenticator in which the Packet Body
Length field is invalid."
::= { pnacPortAuthStatsEntry 11 }
pnacPortAuthLastEapolFrameVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol version number carried in the
most recently received EAPOL frame."
::= { pnacPortAuthStatsEntry 12 }
pnacPortAuthLastEapolFrameSource OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address carried in the
most recently received EAPOL frame."
::= { pnacPortAuthStatsEntry 13 }
-- -------------------------------------------------------------
-- Mac-Based Authentication
----------------------------------------------------------------
pnacMacAuthStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnacMacAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the statistics for the Authenticator
PAE associated with each Supplicant,while Authenticator
operates in MAC based authentication mode."
::= { pnacAuthStatistics 2 }
pnacMacAuthStatsEntry OBJECT-TYPE
SYNTAX PnacMacAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics information for an Authenticator PAE.
This shows the current values being collected for each
Supplicant."
INDEX { pnacMacAuthStatsMacAddr }
::= { pnacMacAuthStatsTable 1 }
PnacMacAuthStatsEntry ::=
SEQUENCE {
pnacMacAuthStatsMacAddr
MacAddress,
pnacMacAuthEapolFramesRx
Counter32,
pnacMacAuthEapolFramesTx
Counter32,
pnacMacAuthEapolStartFramesRx
Counter32,
pnacMacAuthEapolLogoffFramesRx
Counter32,
pnacMacAuthEapolRespIdFramesRx
Counter32,
pnacMacAuthEapolRespFramesRx
Counter32,
pnacMacAuthEapolReqIdFramesTx
Counter32,
pnacMacAuthEapolReqFramesTx
Counter32,
pnacMacAuthInvalidEapolFramesRx
Counter32,
pnacMacAuthEapLengthErrorFramesRx
Counter32,
pnacMacAuthLastEapolFrameVersion
Unsigned32,
pnacMacAuthLastEapolFrameSource
MacAddress,
pnacMacAuthStatsPortNumber
Integer32
}
pnacMacAuthStatsMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the supplicant."
::= { pnacMacAuthStatsEntry 1 }
pnacMacAuthEapolFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL frames of any type
that have been received by this Authenticator."
::= { pnacMacAuthStatsEntry 2 }
pnacMacAuthEapolFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames of any type
that have been transmitted by this Authenticator."
::= { pnacMacAuthStatsEntry 3 }
pnacMacAuthEapolStartFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Start frames that have
been received by this Authenticator."
::= { pnacMacAuthStatsEntry 4 }
pnacMacAuthEapolLogoffFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Logoff frames that have
been received by this Authenticator."
::= { pnacMacAuthStatsEntry 5 }
pnacMacAuthEapolRespIdFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Resp/Id frames that have
been received by this Authenticator."
::= { pnacMacAuthStatsEntry 6 }
pnacMacAuthEapolRespFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAP Response frames
(other than Resp/Id frames) that have been
received by this Authenticator."
::= { pnacMacAuthStatsEntry 7 }
pnacMacAuthEapolReqIdFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Req/Id frames that have been
transmitted by this Authenticator."
::= { pnacMacAuthStatsEntry 8 }
pnacMacAuthEapolReqFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Request frames
(other than Rq/Id frames) that have been
transmitted by this Authenticator."
::= { pnacMacAuthStatsEntry 9 }
pnacMacAuthInvalidEapolFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been
received by this Authenticator in which the
frame type is not recognized."
::= { pnacMacAuthStatsEntry 10 }
pnacMacAuthEapLengthErrorFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received
by this Authenticator in which the Packet Body
Length field is invalid."
::= { pnacMacAuthStatsEntry 11 }
pnacMacAuthLastEapolFrameVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol version number carried in the
most recently received EAPOL frame."
::= { pnacMacAuthStatsEntry 12 }
pnacMacAuthLastEapolFrameSource OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address carried in the
most recently received EAPOL frame."
::= { pnacMacAuthStatsEntry 13 }
pnacMacAuthStatsPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port number for mac-based authentication statistics."
::= { pnacMacAuthStatsEntry 14 }
-- -------------------------------------------------------------
-- pnacAuthSessionStatistics
-- -------------------------------------------------------------
-- Port-Based Authentication
----------------------------------------------------------------
pnacPortAuthSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnacPortAuthSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the session statistics objects
for the Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { pnacAuthSessionStatistics 1 }
pnacPortAuthSessionStatsEntry OBJECT-TYPE
SYNTAX PnacPortAuthSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where
there is no session currently active."
INDEX { pnacPortAuthSessionPortNumber }
::= { pnacPortAuthSessionStatsTable 1 }
PnacPortAuthSessionStatsEntry ::=
SEQUENCE {
pnacPortAuthSessionPortNumber
Integer32,
pnacPortAuthSessionOctetsRx
Counter64,
pnacPortAuthSessionOctetsTx
Counter64,
pnacPortAuthSessionFramesRx
Counter32,
pnacPortAuthSessionFramesTx
Counter32,
pnacPortAuthSessionId
SnmpAdminString,
pnacPortAuthSessionAuthenticMethod
INTEGER,
pnacPortAuthSessionTime
TimeTicks,
pnacPortAuthSessionTerminateCause
INTEGER,
pnacPortAuthSessionUserName
SnmpAdminString
}
pnacPortAuthSessionPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each port that correlates to port index."
::= { pnacPortAuthSessionStatsEntry 1 }
pnacPortAuthSessionOctetsRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received in user data
frames on this Port during the session."
::= { pnacPortAuthSessionStatsEntry 2 }
pnacPortAuthSessionOctetsTx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets transmitted in user data
frames on this Port during the session."
::= { pnacPortAuthSessionStatsEntry 3 }
pnacPortAuthSessionFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of user data frames received
on this Port during the session."
::= { pnacPortAuthSessionStatsEntry 4 }
pnacPortAuthSessionFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of user data frames transmitted
on this Port during the session."
::= { pnacPortAuthSessionStatsEntry 5 }
pnacPortAuthSessionId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique identifier for the session, in the
form of a printable ASCII string of at least
three characters."
::= { pnacPortAuthSessionStatsEntry 6 }
pnacPortAuthSessionAuthenticMethod OBJECT-TYPE
SYNTAX INTEGER {
none(0),
remoteAuthServer(1),
localAuthServer(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication method used to establish the
session."
::= { pnacPortAuthSessionStatsEntry 7 }
pnacPortAuthSessionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of the session in seconds."
::= { pnacPortAuthSessionStatsEntry 8 }
pnacPortAuthSessionTerminateCause OBJECT-TYPE
SYNTAX INTEGER {
supplicantLogoff(1),
portFailure(2),
supplicantRestart(3),
reauthFailed(4),
authControlForceUnauth(5),
portReInit(6),
portAdminDisabled(7),
notTerminatedYet(999)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for the session termination."
::= { pnacPortAuthSessionStatsEntry 9 }
pnacPortAuthSessionUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User-Name representing the identity of the
Supplicant PAE."
::= { pnacPortAuthSessionStatsEntry 10 }
----------------------------------------------------------------
-- Mac-Based Authentication
----------------------------------------------------------------
pnacMacAuthSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnacMacAuthSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the session statistics
for the Authenticator PAE associated with each
Supplicant,while Authenticator operates in MAC
based authentication mode."
::= { pnacAuthSessionStatistics 2 }
pnacMacAuthSessionStatsEntry OBJECT-TYPE
SYNTAX PnacMacAuthSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The session statistics information for an
Authenticator PAE. This shows the current values being
collected for each session that is still in progress,
or the final values for the last valid session on each
port where there is no session currently active."
INDEX { pnacMacAuthSessionSuppAddress }
::= { pnacMacAuthSessionStatsTable 1 }
PnacMacAuthSessionStatsEntry ::=
SEQUENCE {
pnacMacAuthSessionSuppAddress
MacAddress,
pnacMacAuthSessionOctetsRx
Counter64,
pnacMacAuthSessionOctetsTx
Counter64,
pnacMacAuthSessionFramesRx
Counter32,
pnacMacAuthSessionFramesTx
Counter32,
pnacMacAuthSessionId
SnmpAdminString,
pnacMacAuthSessionAuthenticMethod
INTEGER,
pnacMacAuthSessionTime
TimeTicks,
pnacMacAuthSessionTerminateCause
INTEGER,
pnacMacAuthSessionUserName
SnmpAdminString,
pnacMacAuthSessionPortNumber
Integer32
}
pnacMacAuthSessionSuppAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the supplicant."
::= { pnacMacAuthSessionStatsEntry 1 }
pnacMacAuthSessionOctetsRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts number of session octets received."
::= { pnacMacAuthSessionStatsEntry 2 }
pnacMacAuthSessionOctetsTx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts number of session octets transmitted."
::= { pnacMacAuthSessionStatsEntry 3 }
pnacMacAuthSessionFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts number of session frames received."
::= { pnacMacAuthSessionStatsEntry 4 }
pnacMacAuthSessionFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts number of session frames transmitted."
::= { pnacMacAuthSessionStatsEntry 5 }
pnacMacAuthSessionId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique Session identifier, in the form of a
printable ASCII string of at least three characters."
::= { pnacMacAuthSessionStatsEntry 6 }
pnacMacAuthSessionAuthenticMethod OBJECT-TYPE
SYNTAX INTEGER {
none(0),
remoteAuthServer(1),
localAuthServer(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication method used to establish the
session."
::= { pnacMacAuthSessionStatsEntry 7 }
pnacMacAuthSessionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of the session in seconds."
::= { pnacMacAuthSessionStatsEntry 8 }
pnacMacAuthSessionTerminateCause OBJECT-TYPE
SYNTAX INTEGER {
supplicantLogoff(1),
portFailure(2),
supplicantRestart(3),
reauthFailed(4),
authControlForceUnauth(5),
portReInit(6),
portAdminDisabled(7),
notTerminatedYet(999)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason for the session termination."
::= { pnacMacAuthSessionStatsEntry 9 }
pnacMacAuthSessionUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User name representing the identity of the
Supplicant PAE."
::= { pnacMacAuthSessionStatsEntry 10 }
pnacMacAuthSessionPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port number for Mac-based authentication session information."
::= { pnacMacAuthSessionStatsEntry 11 }
----------------------------------------------------------------
-- pnacAuthDiagnostics
-- -------------------------------------------------------------
-- Port-Based Authentication
----------------------------------------------------------------
pnacPortAuthDiagTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnacPortAuthDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the diagnostics objects for the
Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { pnacAuthDiagnostics 1 }
pnacPortAuthDiagEntry OBJECT-TYPE
SYNTAX PnacPortAuthDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The diagnostics information for an Authenticator PAE."
INDEX { pnacPortAuthDiagPortNumber }
::= { pnacPortAuthDiagTable 1 }
PnacPortAuthDiagEntry ::=
SEQUENCE {
pnacPortAuthDiagPortNumber
Integer32,
pnacPortAuthEntersConnecting
Counter32,
pnacPortAuthEapLogoffsWhileConnecting
Counter32,
pnacPortAuthEntersAuthenticating
Counter32,
pnacPortAuthAuthSuccessWhileAuthenticating
Counter32,
pnacPortAuthAuthTimeoutsWhileAuthenticating
Counter32,
pnacPortAuthAuthFailWhileAuthenticating
Counter32,
pnacPortAuthAuthReauthsWhileAuthenticating
Counter32,
pnacPortAuthAuthEapStartsWhileAuthenticating
Counter32,
pnacPortAuthAuthEapLogoffWhileAuthenticating
Counter32,
pnacPortAuthAuthReauthsWhileAuthenticated
Counter32,
pnacPortAuthAuthEapStartsWhileAuthenticated
Counter32,
pnacPortAuthAuthEapLogoffWhileAuthenticated
Counter32,
pnacPortAuthBackendResponses
Counter32,
pnacPortAuthBackendAccessChallenges
Counter32,
pnacPortAuthBackendOtherRequestsToSupplicant
Counter32,
pnacPortAuthBackendNonNakResponsesFromSupplicant
Counter32,
pnacPortAuthBackendAuthSuccesses
Counter32,
pnacPortAuthBackendAuthFails
Counter32
}
pnacPortAuthDiagPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each port that correlates to port index."
::= { pnacPortAuthDiagEntry 1 }
pnacPortAuthEntersConnecting OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions to the CONNECTING state from any other
state."
::= { pnacPortAuthDiagEntry 2 }
pnacPortAuthEapLogoffsWhileConnecting OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from CONNECTING to DISCONNECTED as a result
of receiving an EAPOL-Logoff message."
::= { pnacPortAuthDiagEntry 3 }
pnacPortAuthEntersAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from CONNECTING to AUTHENTICATING, as a
result of an EAP-Response/Identity message being
received from the Supplicant."
::= { pnacPortAuthDiagEntry 4 }
pnacPortAuthAuthSuccessWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to AUTHENTICATED, as a
result of the Backend Authentication state machine
indicating successful authentication of the Supplicant
(authSuccess = TRUE)."
::= { pnacPortAuthDiagEntry 5 }
pnacPortAuthAuthTimeoutsWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of the Backend Authentication state machine indicating
authentication timeout (authTimeout = TRUE)."
::= { pnacPortAuthDiagEntry 6 }
pnacPortAuthAuthFailWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to HELD, as a result
of the Backend Authentication state machine indicating
authentication failure (authFail = TRUE)."
::= { pnacPortAuthDiagEntry 7 }
pnacPortAuthAuthReauthsWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of a reauthentication request (reAuthenticate = TRUE)."
::= { pnacPortAuthDiagEntry 8 }
pnacPortAuthAuthEapStartsWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPOL-Start message being received
from the Supplicant."
::= { pnacPortAuthDiagEntry 9 }
pnacPortAuthAuthEapLogoffWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPOL-Logoff message being received
from the Supplicant."
::= { pnacPortAuthDiagEntry 10 }
pnacPortAuthAuthReauthsWhileAuthenticated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of a reauthentication request
(reAuthenticate = TRUE)."
::= { pnacPortAuthDiagEntry 11 }
pnacPortAuthAuthEapStartsWhileAuthenticated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of an EAPOL-Start message being received from the
Supplicant."
::= { pnacPortAuthDiagEntry 12 }
pnacPortAuthAuthEapLogoffWhileAuthenticated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATED to DISCONNECTED, as a
result of an EAPOL-Logoff message being received from
the Supplicant."
::= { pnacPortAuthDiagEntry 13 }
pnacPortAuthBackendResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine sends
an initial Access-Request packet to the Authentication
server (i.e., executes sendRespToServer on entry to the
RESPONSE state). Indicates that the Authenticator
attempted communication with the Authentication Server."
::= { pnacPortAuthDiagEntry 14 }
pnacPortAuthBackendAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives an initial Access-Challenge packet from the
Authentication server (i.e., aReq becomes TRUE,
causing exit from the RESPONSE state). Indicates that
the Authentication Server has communication with
the Authenticator."
::= { pnacPortAuthDiagEntry 15 }
pnacPortAuthBackendOtherRequestsToSupplicant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
sends an EAP-Request packet (other than an Identity,
Notification, Failure or Success message) to the
Supplicant (i.e., executes txReq on entry to the
REQUEST state). Indicates that the Authenticator chose
an EAP-method."
::= { pnacPortAuthDiagEntry 16 }
pnacPortAuthBackendNonNakResponsesFromSupplicant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives a response from the Supplicant to an initial
EAP-Request, and the response is something other than
EAP-NAK (i.e., rxResp becomes TRUE, causing the state
machine to transition from REQUEST to RESPONSE,
and the response is not an EAP-NAK). Indicates that
the Supplicant can respond to the Authenticator's
chosen EAP-method."
::= { pnacPortAuthDiagEntry 17 }
pnacPortAuthBackendAuthSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives an EAP-Success message from the Authentication
Server (i.e., aSuccess becomes TRUE, causing a
transition from RESPONSE to SUCCESS). Indicates that
the Supplicant has successfully authenticated to
the Authentication Server."
::= { pnacPortAuthDiagEntry 18 }
pnacPortAuthBackendAuthFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives an EAP-Failure message from the Authentication
Server (i.e., aFail becomes TRUE, causing a transition
from RESPONSE to FAIL). Indicates that the Supplicant
has not authenticated to the Authentication Server."
::= { pnacPortAuthDiagEntry 19 }
----------------------------------------------------------------
-- MAC-Based Authentication
----------------------------------------------------------------
pnacMacAuthDiagStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnacMacAuthDiagStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the Diagnostics statistics for the Authenticator
PAE associated with each Supplicant,while Authenticator
operates in MAC based authentication mode."
::= { pnacAuthDiagnostics 2 }
pnacMacAuthDiagStatsEntry OBJECT-TYPE
SYNTAX PnacMacAuthDiagStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Diagnostics statistics information for an Authenticator PAE.
This shows the current values being collected for each
Supplicant."
INDEX { pnacMacAuthDiagSuppAddress }
::= { pnacMacAuthDiagStatsTable 1 }
PnacMacAuthDiagStatsEntry ::=
SEQUENCE {
pnacMacAuthDiagSuppAddress
MacAddress,
pnacMacAuthEntersConnecting
Counter32,
pnacMacAuthEapLogoffsWhileConnecting
Counter32,
pnacMacAuthEntersAuthenticating
Counter32,
pnacMacAuthAuthSuccessWhileAuthenticating
Counter32,
pnacMacAuthAuthTimeoutsWhileAuthenticating
Counter32,
pnacMacAuthAuthFailWhileAuthenticating
Counter32,
pnacMacAuthAuthReauthsWhileAuthenticating
Counter32,
pnacMacAuthAuthEapStartsWhileAuthenticating
Counter32,
pnacMacAuthAuthEapLogoffWhileAuthenticating
Counter32,
pnacMacAuthAuthReauthsWhileAuthenticated
Counter32,
pnacMacAuthAuthEapStartsWhileAuthenticated
Counter32,
pnacMacAuthAuthEapLogoffWhileAuthenticated
Counter32,
pnacMacAuthBackendResponses
Counter32,
pnacMacAuthBackendAccessChallenges
Counter32,
pnacMacAuthBackendOtherRequestsToSupplicant
Counter32,
pnacMacAuthBackendNonNakResponsesFromSupplicant
Counter32,
pnacMacAuthBackendAuthSuccesses
Counter32,
pnacMacAuthBackendAuthFails
Counter32,
pnacMacAuthDiagPortNumber
Integer32
}
pnacMacAuthDiagSuppAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the supplicant."
::= { pnacMacAuthDiagStatsEntry 1 }
pnacMacAuthEntersConnecting OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions to the CONNECTING state from any other
state."
::= { pnacMacAuthDiagStatsEntry 2 }
pnacMacAuthEapLogoffsWhileConnecting OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from CONNECTING to DISCONNECTED as a result
of receiving an EAPOL-Logoff message."
::= { pnacMacAuthDiagStatsEntry 3 }
pnacMacAuthEntersAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from CONNECTING to AUTHENTICATING, as a
result of an EAP-Response/Identity message being
received from the Supplicant."
::= { pnacMacAuthDiagStatsEntry 4 }
pnacMacAuthAuthSuccessWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to AUTHENTICATED, as a
result of the Backend Authentication state machine
indicating successful authentication of the Supplicant
(authSuccess = TRUE)."
::= { pnacMacAuthDiagStatsEntry 5 }
pnacMacAuthAuthTimeoutsWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of the Backend Authentication state machine indicating
authentication timeout (authTimeout = TRUE)."
::= { pnacMacAuthDiagStatsEntry 6 }
pnacMacAuthAuthFailWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to HELD, as a result
of the Backend Authentication state machine indicating
authentication failure (authFail = TRUE)."
::= { pnacMacAuthDiagStatsEntry 7 }
pnacMacAuthAuthReauthsWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of a reauthentication request (reAuthenticate = TRUE)."
::= { pnacMacAuthDiagStatsEntry 8 }
pnacMacAuthAuthEapStartsWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPOL-Start message being received
from the Supplicant."
::= { pnacMacAuthDiagStatsEntry 9 }
pnacMacAuthAuthEapLogoffWhileAuthenticating OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPOL-Logoff message being received
from the Supplicant."
::= { pnacMacAuthDiagStatsEntry 10 }
pnacMacAuthAuthReauthsWhileAuthenticated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of a reauthentication request
(reAuthenticate = TRUE)."
::= { pnacMacAuthDiagStatsEntry 11 }
pnacMacAuthAuthEapStartsWhileAuthenticated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of an EAPOL-Start message being received from the
Supplicant."
::= { pnacMacAuthDiagStatsEntry 12 }
pnacMacAuthAuthEapLogoffWhileAuthenticated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
transitions from AUTHENTICATED to DISCONNECTED, as a
result of an EAPOL-Logoff message being received from
the Supplicant."
::= { pnacMacAuthDiagStatsEntry 13 }
pnacMacAuthBackendResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine sends
an initial Access-Request packet to the Authentication
server (i.e., executes sendRespToServer on entry to the
RESPONSE state). Indicates that the Authenticator
attempted communication with the Authentication Server."
::= { pnacMacAuthDiagStatsEntry 14 }
pnacMacAuthBackendAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives an initial Access-Challenge packet from the
Authentication server (i.e., aReq becomes TRUE,
causing exit from the RESPONSE state). Indicates that
the Authentication Server has communication with
the Authenticator."
::= { pnacMacAuthDiagStatsEntry 15 }
pnacMacAuthBackendOtherRequestsToSupplicant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
sends an EAP-Request packet (other than an Identity,
Notification, Failure or Success message) to the
Supplicant (i.e., executes txReq on entry to the
REQUEST state). Indicates that the Authenticator chose
an EAP-method."
::= { pnacMacAuthDiagStatsEntry 16 }
pnacMacAuthBackendNonNakResponsesFromSupplicant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives a response from the Supplicant to an initial
EAP-Request, and the response is something other than
EAP-NAK (i.e., rxResp becomes TRUE, causing the state
machine to transition from REQUEST to RESPONSE,
and the response is not an EAP-NAK). Indicates that
the Supplicant can respond to the Authenticator's
chosen EAP-method."
::= { pnacMacAuthDiagStatsEntry 17 }
pnacMacAuthBackendAuthSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives an EAP-Success message from the Authentication
Server (i.e., aSuccess becomes TRUE, causing a
transition from RESPONSE to SUCCESS). Indicates that
the Supplicant has successfully authenticated to
the Authentication Server."
::= { pnacMacAuthDiagStatsEntry 18 }
pnacMacAuthBackendAuthFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives an EAP-Failure message from the Authentication
Server (i.e., aFail becomes TRUE, causing a transition
from RESPONSE to FAIL). Indicates that the Supplicant
has not authenticated to the Authentication Server."
::= { pnacMacAuthDiagStatsEntry 19 }
pnacMacAuthDiagPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port number for Mac-based authentication diagnostics."
::= { pnacMacAuthDiagStatsEntry 20 }
----------------------Pnac Trap Extension-----------------------------
pnacAuthTraps OBJECT IDENTIFIER ::= { securityPnacGroup 7 }
pnacAuthTrapsList OBJECT IDENTIFIER ::= { pnacAuthTraps 0 }
pnacAuthNotifyAuthSuccess NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The trap is sent when 802.1x authentication success."
::= {pnacAuthTrapsList 1 }
pnacAuthNotifyAuthFailure NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The trap is sent when 802.1x authentication failure."
::= {pnacAuthTrapsList 2 }
-- ----------------------------------------------------------
-- groups in the AAA MIB
-- ----------------------------------------------------------
aaaGlobalSettings OBJECT IDENTIFIER ::= { securityAAAGroup 1 }
aaaAuthenticationNetwork OBJECT IDENTIFIER ::= { securityAAAGroup 2 }
-- -------------------------------------------------------------
-- aaaGlobalSettings
-- -------------------------------------------------------------
aaaState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Access Authentication is enable or
disable."
::= { aaaGlobalSettings 1}
-- -------------------------------------------------------------
-- AAA Authentication Network
-- -------------------------------------------------------------
aaaNETAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaNETAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table configure AAA Network authentication method."
::= { aaaAuthenticationNetwork 1 }
aaaNETAuthEntry OBJECT-TYPE
SYNTAX AaaNETAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry represent each protocol authentication method."
INDEX {aaaNETAuthType}
::= { aaaNETAuthTable 1 }
AaaNETAuthEntry ::= SEQUENCE {
aaaNETAuthType INTEGER,
aaaNETAuthStatus INTEGER,
aaaNETAuthFirstMethod INTEGER,
aaaNETAuthFirstServerGroupName DisplayString,
aaaNETAuthSecondMethod INTEGER,
aaaNETAuthSecondServerGroupName DisplayString,
aaaNETAuthThirdMethod INTEGER,
aaaNETAuthThirdServerGroupName DisplayString,
aaaNETAuthForthMethod INTEGER,
aaaNETAuthForthServerGroupName DisplayString
}
aaaNETAuthType OBJECT-TYPE
SYNTAX INTEGER {
dot1x(1),
macauth(2),
webauth(3),
jwac(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol which need authentication."
::= { aaaNETAuthEntry 1 }
aaaNETAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable AAA Authentication Network."
::= { aaaNETAuthEntry 2 }
aaaNETAuthFirstMethod OBJECT-TYPE
SYNTAX INTEGER {
none(0),
local(1),
group(2),
radius(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AAA Authentication Network first Method type."
::= { aaaNETAuthEntry 3 }
aaaNETAuthFirstServerGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AAA Authentication Network first server group name."
::= { aaaNETAuthEntry 4 }
aaaNETAuthSecondMethod OBJECT-TYPE
SYNTAX INTEGER {
none(0),
local(1),
group(2),
radius(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AAA Authentication Network second Method type."
::= { aaaNETAuthEntry 5 }
aaaNETAuthSecondServerGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AAA Authentication Network second server group name."
::= { aaaNETAuthEntry 6 }
aaaNETAuthThirdMethod OBJECT-TYPE
SYNTAX INTEGER {
none(0),
local(1),
group(2),
radius(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AAA Authentication Network Third Method type."
::= { aaaNETAuthEntry 7 }
aaaNETAuthThirdServerGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AAA Authentication Network Third server group name."
::= { aaaNETAuthEntry 8 }
aaaNETAuthForthMethod OBJECT-TYPE
SYNTAX INTEGER {
none(0),
local(1),
group(2),
radius(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AAA Authentication Network Forth Method type."
::= { aaaNETAuthEntry 9 }
aaaNETAuthForthServerGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AAA Authentication Network Forth server group name."
::= { aaaNETAuthEntry 10 }
radiusGlobalSettings OBJECT IDENTIFIER ::= { securityRadiusGroup 1 }
radiusServerSettings OBJECT IDENTIFIER ::= { securityRadiusGroup 2 }
radiusGroupServerSettings OBJECT IDENTIFIER ::= { securityRadiusGroup 3 }
radiusStatistic OBJECT IDENTIFIER ::= { securityRadiusGroup 4 }
-- ----------------------------------------------------------
-- radiusGlobalSettings
-- ----------------------------------------------------------
radiusServerDeadTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Radius Server Dead Time."
::= { radiusGlobalSettings 1 }
-- ----------------------------------------------------------
-- radiusServerSettings
-- ----------------------------------------------------------
radiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { radiusServerSettings 1 }
radiusServerEntry OBJECT-TYPE
SYNTAX RadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { radiusServerIndex }
::= { radiusServerTable 1 }
RadiusServerEntry ::= SEQUENCE {
radiusServerIndex Integer32,
radiusServerIPType INTEGER,
radiusServerAddress InetAddress,
radiusServerAuthPort Integer32,
radiusServerRetransmit Integer32,
radiusServerTimeout Integer32,
radiusServerKeyType INTEGER,
radiusServerKey DisplayString,
radiusServerRowStatus RowStatus
}
radiusServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for Authentication RADIUS Server index."
::= { radiusServerEntry 1 }
radiusServerIPType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the RADIUS server IP type referred to in this table entry."
DEFVAL { ipv4 }
::= { radiusServerEntry 2 }
radiusServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the RADIUS server referred to in this table entry."
::= { radiusServerEntry 3 }
radiusServerAuthPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 1812 }
::= { radiusServerEntry 4 }
radiusServerRetransmit OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 3 }
::= { radiusServerEntry 5 }
radiusServerTimeout OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 5 }
::= { radiusServerEntry 6 }
radiusServerKeyType OBJECT-TYPE
SYNTAX INTEGER {
plaintext(1),
encrypted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius Server key type: plain text or encrypted."
::= { radiusServerEntry 7 }
radiusServerKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set 802.1X Radius Server Key,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { radiusServerEntry 8 }
radiusServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row in the
radiusServerTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The pnacRadiusServerIndex objects
must be explicitly set."
::= { radiusServerEntry 9 }
-- ----------------------------------------------------------
-- radiusGroupServerSettings
-- ----------------------------------------------------------
radiusServerGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusServerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains informations about server group."
::= { radiusGroupServerSettings 1 }
radiusServerGroupEntry OBJECT-TYPE
SYNTAX RadiusServerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the group including servers."
INDEX { radiusServerGroupName }
::= { radiusServerGroupTable 1 }
RadiusServerGroupEntry ::= SEQUENCE {
radiusServerGroupName DisplayString,
radiusServersInGroup BITS,
radiusServerGroupRowStatus RowStatus
}
radiusServerGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A human-readable text string of the method group."
::= { radiusServerGroupEntry 1 }
radiusServersInGroup OBJECT-TYPE
SYNTAX BITS {
id1(0),
id2(1),
id3(2),
id4(3),
id5(4),
id6(5),
id7(6),
id8(7),
id9(8),
id10(9),
id11(10),
id12(11),
id13(12),
id14(13),
id15(14),
id16(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of servers in the group, each bit indicates a specified server ID.
The server must be created before including it."
::= { radiusServerGroupEntry 2 }
radiusServerGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { radiusServerGroupEntry 3 }
-- ----------------------------------------------------------
-- radiusStatistic
-- ----------------------------------------------------------
-- Radius Authentication Group
radiusAuthServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusAuthServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table taht lists the RADIUS authentication
servers with which the client shares a secret."
::= { radiusStatistic 1 }
radiusAuthServerEntry OBJECT-TYPE
SYNTAX RadiusAuthServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) that represents a RADIUS
authentication server with which the client shares
a secret."
INDEX { radiusAuthServerIndex }
::= { radiusAuthServerTable 1 }
RadiusAuthServerEntry ::= SEQUENCE {
radiusAuthServerIndex Integer32,
radiusAuthClientRoundTripTime TimeTicks,
radiusAuthClientAccessRequests Counter32,
radiusAuthClientAccessRetransmissions Counter32,
radiusAuthClientAccessAccepts Counter32,
radiusAuthClientAccessRejects Counter32,
radiusAuthClientAccessChallenges Counter32,
radiusAuthClientMalformedAccessResponses Counter32,
radiusAuthClientBadAuthenticators Counter32,
radiusAuthClientPendingRequests Gauge32,
radiusAuthClientTimeouts Counter32,
radiusAuthClientUnknownTypes Counter32,
radiusAuthClientPacketsDropped Counter32,
radiusAuthClientStatisticClear INTEGER
}
radiusAuthServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for Authentication RADIUS Server index."
::= { radiusAuthServerEntry 1 }
radiusAuthClientRoundTripTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval (in hundredths of a second) between
the most recent Access-Reply/Access-Challenge and the
Access-Request that that matches with the
Access-Reply/Access-Challengeit from the RADIUS
authentication server."
::= { radiusAuthServerEntry 2 }
-- Request/Response statistics
--
-- TotalIncomingPackets = Accepts + Rejects + Challenges + UnknownTypes
--
-- TotalIncomingPackets - MalformedResponses - BadAuthenticators -
-- UnknownTypes - PacketsDropped = Successfully received
--
-- AccessRequests + PendingRequests + ClientTimeouts =
-- Successfully Received
--
--
radiusAuthClientAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets sent
to this server. This does not include retransmissions."
::= { radiusAuthServerEntry 3 }
radiusAuthClientAccessRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets
retransmitted to this RADIUS authentication server."
::= { radiusAuthServerEntry 4 }
radiusAuthClientAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Accept packets
(valid or invalid) received from this server."
::= { radiusAuthServerEntry 5 }
radiusAuthClientAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Reject packets
(valid or invalid) received from this server."
::= { radiusAuthServerEntry 6 }
radiusAuthClientAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Challenge packets
(valid or invalid) received from this server."
::= { radiusAuthServerEntry 7 }
-- "Access-Response" includes an Access-Accept, Access-Challenge
-- or Access-Reject
radiusAuthClientMalformedAccessResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
Signature attributes or unknown types are not
included as malformed access responses."
::= { radiusAuthServerEntry 8 }
radiusAuthClientBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Response packets
containing invalid authenticators or Signature
attributes received from this server."
::= { radiusAuthServerEntry 9 }
radiusAuthClientPendingRequests OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets
destined for this server, which have not yet timed out
or received a response. This variable is incremented
when an Access-Request is sent and is decremented due to
receipt of an Access-Accept, Access-Reject or
Access-Challenge, a timeout or retransmission."
::= { radiusAuthServerEntry 10 }
radiusAuthClientTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication timeouts to this server.
After the entry timeout the client may retry to the same
server, send to a different server, or
give up. Retry to the same server is counted as a
retransmit as well as a timeout. Send to a different
server is counted as a Request as well as a timeout."
::= { radiusAuthServerEntry 11 }
radiusAuthClientUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type, which
were received from this server on the authentication port."
::= { radiusAuthServerEntry 12 }
radiusAuthClientPacketsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets, which were
received from this server on the authentication port
and dropped for some other reason."
::= { radiusAuthServerEntry 13 }
radiusAuthClientStatisticClear OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for Radius Auth Client Statistics information clear."
::= { radiusAuthServerEntry 14 }
-- -------------------------------------------------------------
-- groups in the Pnac MIB
-- -------------------------------------------------------------
networkAuthGlobalSettings OBJECT IDENTIFIER ::= { securityNetworkAuthGroup 1 }
networkAuthPortSettings OBJECT IDENTIFIER ::= { securityNetworkAuthGroup 2 }
networkAuthSessionInfo OBJECT IDENTIFIER ::= { securityNetworkAuthGroup 3 }
-- -----------------------------------------------------------------------------
-- networkAuthGlobalSettings
-- -----------------------------------------------------------------------------
-- General Settings
-- -----------------------------------------------------------------------------
networkAuthDenyMacMove OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Deny MAC-Move function."
::= { networkAuthGlobalSettings 1 }
networkAuthorizationState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable 802.1x authorization function."
::= { networkAuthGlobalSettings 2 }
-- ------------------------------------------------------------
-- User Information
-- ------------------------------------------------------------
networkAuthUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkAuthUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the local user information."
::= { networkAuthGlobalSettings 3 }
networkAuthUserEntry OBJECT-TYPE
SYNTAX NetworkAuthUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for each user."
INDEX { networkAuthUserName }
::= { networkAuthUserTable 1 }
NetworkAuthUserEntry ::= SEQUENCE {
networkAuthUserName SnmpAdminString,
networkAuthUserAssignVlan Unsigned32,
networkAuthUserPasswordType INTEGER,
networkAuthUserPassword DisplayString,
networkAuthUserStatus RowStatus
}
networkAuthUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique index value of a row in this table.
This object is used to set 802.1X Local user name."
::= { networkAuthUserEntry 1 }
networkAuthUserAssignVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port vlan entry after which the Authentication
offerred to the User ceases. When the object value
is 0, the Authenticator port will not be assigned to new vlan."
::= { networkAuthUserEntry 2 }
networkAuthUserPasswordType OBJECT-TYPE
SYNTAX INTEGER {
plaintext(1),
encrypted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User password type: plain text or encrypted."
::= { networkAuthUserEntry 3 }
networkAuthUserPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set 802.1X Local user Password."
::= { networkAuthUserEntry 4 }
networkAuthUserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row in the networkAuthUserTable."
::= { networkAuthUserEntry 5 }
-- -------------------------------------------------------------
-- networkAuthPortSettings
-- -------------------------------------------------------------
networkAuthPortSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkAuthPortSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port."
::= { networkAuthPortSettings 1 }
networkAuthPortSettingsEntry OBJECT-TYPE
SYNTAX NetworkAuthPortSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { networkAuthPortNumber }
::= { networkAuthPortSettingsTable 1 }
NetworkAuthPortSettingsEntry ::= SEQUENCE {
networkAuthPortNumber Integer32,
networkAuthHostMode INTEGER,
networkAuthHostVlanList OCTET STRING,
networkAuthPeriodic INTEGER,
networkAuthReAuthTimer Unsigned32,
networkAuthRestart Unsigned32,
networkAuthGuestVlan Integer32
}
networkAuthPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value for each port that correlates to port index."
::= { networkAuthPortSettingsEntry 1 }
networkAuthHostMode OBJECT-TYPE
SYNTAX INTEGER {
multihost(1),
multiauth(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configuration of the port, for Port Based
Authentication or MAC Based Authentication."
::= { networkAuthPortSettingsEntry 2 }
networkAuthHostVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan List from which client packet received."
::= { networkAuthPortSettingsEntry 3}
networkAuthPeriodic OBJECT-TYPE
SYNTAX INTEGER { enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enable/disable control used by the Reauthentication
Timer state machine."
::= { networkAuthPortSettingsEntry 4 }
networkAuthReAuthTimer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine."
DEFVAL { 3600 }
::= { networkAuthPortSettingsEntry 5 }
networkAuthRestart OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the quietPeriod constant
currently in use by the Authenticator PAE state
machine."
::= { networkAuthPortSettingsEntry 6 }
networkAuthGuestVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure port's guest VLAN. 0 represent for not configured."
::= { networkAuthPortSettingsEntry 7 }
-- -------------------------------------------------------------
-- networkAuthSessionInfo
-- -------------------------------------------------------------
-- Port-Based Authentication
----------------------------------------------------------------
networkPortAuthSessionInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkPortAuthSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the network authentication session information for each port."
::= { networkAuthSessionInfo 1 }
networkPortAuthSessionInfoEntry OBJECT-TYPE
SYNTAX NetworkPortAuthSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The authentication session information for an Authenticator Port."
INDEX { networkPortAuthPortNumber }
::= { networkPortAuthSessionInfoTable 1 }
NetworkPortAuthSessionInfoEntry ::= SEQUENCE {
networkPortAuthPortNumber Integer32,
networkPortAuthMac MacAddress,
networkPortAuthVlan Unsigned32,
networkPortAuthUserName SnmpAdminString,
networkPortAuthPaeState INTEGER,
networkPortAuthBackendState INTEGER,
networkPortAuthFailReason INTEGER,
networkPortAuthAssignIngressBandwidth Integer32,
networkPortAuthAssignEgressBandwidth Integer32,
networkPortAuthAssignPriority INTEGER
}
networkPortAuthPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each port that correlates to port index."
::= { networkPortAuthSessionInfoEntry 1 }
networkPortAuthMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the supplicant."
::= { networkPortAuthSessionInfoEntry 2 }
networkPortAuthVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan from which supplicant authentication request received."
::= { networkPortAuthSessionInfoEntry 3}
networkPortAuthUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User-Name representing the identity of the Supplicant PAE."
::= { networkPortAuthSessionInfoEntry 4 }
networkPortAuthPaeState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
disconnected(2),
connecting(3),
authenticating(4),
authenticated(5),
aborting(6),
held(7),
forceAuth(8),
forceUnauth(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the Authenticator PAE state
machine."
::= { networkPortAuthSessionInfoEntry 5 }
networkPortAuthBackendState OBJECT-TYPE
SYNTAX INTEGER {
request(1),
response(2),
success(3),
fail(4),
timeout(5),
idle(6),
initialize(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Backend Authentication
state machine."
::= { networkPortAuthSessionInfoEntry 6 }
networkPortAuthFailReason OBJECT-TYPE
SYNTAX INTEGER {
none(0),
userauthfail(1),
noserverrespond(2),
noserverconfig(3),
noresource(4),
usertimeout(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication failure reason."
::= { networkPortAuthSessionInfoEntry 7 }
networkPortAuthAssignIngressBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Assignment Ingress Bandwidth from Radius Server after authentication pass."
::= { networkPortAuthSessionInfoEntry 8 }
networkPortAuthAssignEgressBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Assignment Egress Bandwidth from Radius Server after authentication pass."
::= { networkPortAuthSessionInfoEntry 9 }
networkPortAuthAssignPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Assignment Priority from Radius Server after authentication pass."
::= { networkPortAuthSessionInfoEntry 10 }
-- -------------------------------------------------------------
-- MAC-Based Authentication
----------------------------------------------------------------
networkMacAuthSessionInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkMacAuthSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the authentication session information for each mac auth session."
::= { networkAuthSessionInfo 2 }
networkMacAuthSessionInfoEntry OBJECT-TYPE
SYNTAX NetworkMacAuthSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The authentication session information for each mac auth session."
INDEX { networkMacAuthMacAddr }
::= { networkMacAuthSessionInfoTable 1 }
NetworkMacAuthSessionInfoEntry ::= SEQUENCE {
networkMacAuthMacAddr MacAddress,
networkMacAuthPortNumber Integer32,
networkMacAuthVlan Unsigned32,
networkMacAuthUserName SnmpAdminString,
networkMacAuthPaeState INTEGER,
networkMacAuthBackendState INTEGER,
networkMacAuthFailReason INTEGER
}
networkMacAuthMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the supplicant."
::= { networkMacAuthSessionInfoEntry 1 }
networkMacAuthPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port index concerned with mac authentication."
::= { networkMacAuthSessionInfoEntry 2 }
networkMacAuthVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan from which supplicant authentication request received."
::= { networkMacAuthSessionInfoEntry 3}
networkMacAuthUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User-Name representing the identity of the Supplicant PAE."
::= { networkMacAuthSessionInfoEntry 4 }
networkMacAuthPaeState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
disconnected(2),
connecting(3),
authenticating(4),
authenticated(5),
aborting(6),
held(7),
forceAuth(8),
forceUnauth(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the Authenticator PAE state
machine."
::= { networkMacAuthSessionInfoEntry 5 }
networkMacAuthBackendState OBJECT-TYPE
SYNTAX INTEGER {
request(1),
response(2),
success(3),
fail(4),
timeout(5),
idle(6),
initialize(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Backend Authentication
state machine."
::= { networkMacAuthSessionInfoEntry 6 }
networkMacAuthFailReason OBJECT-TYPE
SYNTAX INTEGER {
none(0),
userauthfail(1),
noserverrespond(2),
noserverconfig(3),
noresource(4),
usertimeout(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication failure reason."
::= { networkMacAuthSessionInfoEntry 7 }
sessionTimeoutWeb OBJECT-TYPE
SYNTAX Integer32 (60..36000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Session Timeout. Web Session Timeout (60-36000)sec."
DEFVAL {180}
::= { mgtSessionTimeoutGroup 1 }
-- sessionTimeoutConsole OBJECT-TYPE
-- SYNTAX Integer32 (0..1439)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Session Timeout. Console Session Timeout (0-1439)min."
-- DEFVAL {3}
-- ::= { mgtSessionTimeoutGroup 2 }
sessionTimeoutTelnet OBJECT-TYPE
SYNTAX Integer32 (0..1439)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Session Timeout. Telnet Session Timeout (0-1439)min."
DEFVAL {3}
::= { mgtSessionTimeoutGroup 2 }
-- sessionTimeoutSSH OBJECT-TYPE
-- SYNTAX Integer32 (0..1439)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Session Timeout. SSH Session Timeout (0-1439)min."
-- DEFVAL {3}
-- ::= { mgtSessionTimeoutGroup 3 }
-- ----------------------------------------------------------
-- The companyCableDiagnostic Groups
-- ----------------------------------------------------------
-- Virtual Cable Test Group --------------------------------------------- --
cableDiagTriggerIndex OBJECT-TYPE
SYNTAX Integer32 (1..28)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trigger an interface index to do virtual cable test."
::= {oamCableDiagGroup 1 }
------------------------------------------------------
--Cable Diag test status
------------------------------------------------------
cableDiagTestPairTable OBJECT-TYPE
SYNTAX SEQUENCE OF CableDiagTestPairEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to get pair state and pair len."
::= { oamCableDiagGroup 2 }
cableDiagTestPairEntry OBJECT-TYPE
SYNTAX CableDiagTestPairEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
Test in the system."
INDEX { cableDiagTestPortPair }
::= { cableDiagTestPairTable 1 }
CableDiagTestPairEntry ::=
SEQUENCE {
cableDiagTestPortPair Integer32,
cableDiagTestResultPair1 INTEGER,
cableDiagTestResultPair2 INTEGER,
cableDiagTestResultPair3 INTEGER,
cableDiagTestResultPair4 INTEGER,
cableDiagTestLenPair1 Integer32,
cableDiagTestLenPair2 Integer32,
cableDiagTestLenPair3 Integer32,
cableDiagTestLenPair4 Integer32,
cableDiagTestLenPairClear Integer32
}
cableDiagTestPortPair OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Record the cable diagnostic Test Port."
::= {cableDiagTestPairEntry 1}
cableDiagTestResultPair1 OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
open (1),
short (2),
crosstalk (4),
notAvailable (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"virtual cable test pair1 test result."
::= {cableDiagTestPairEntry 2}
cableDiagTestResultPair2 OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
open (1),
short (2),
crosstalk (4),
notAvailable (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"virtual cable test pair2 test result."
::= {cableDiagTestPairEntry 3}
cableDiagTestResultPair3 OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
open (1),
short (2),
crosstalk (4),
notAvailable (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"virtual cable test pair3 test result."
::= {cableDiagTestPairEntry 4}
cableDiagTestResultPair4 OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
open (1),
short (2),
crosstalk (4),
notAvailable (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"virtual cable test pair4 test result."
::= {cableDiagTestPairEntry 5}
cableDiagTestLenPair1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"virtual cable test pair1 fault distance."
::= {cableDiagTestPairEntry 6}
cableDiagTestLenPair2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"virtual cable test pair2 fault distance."
::= {cableDiagTestPairEntry 7}
cableDiagTestLenPair3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"virtual cable test pair3 fault distance."
::= {cableDiagTestPairEntry 8}
cableDiagTestLenPair4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"virtual cable test pair4 fault distance."
::= {cableDiagTestPairEntry 9}
cableDiagTestLenPairClear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear virtual cable test results."
::= {cableDiagTestPairEntry 10}
passwordEncryptionStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set Password Encryption State Enable\Disable."
DEFVAL { disable }
::= { mgtPasswordEncryptionGroup 1 }
-- -----------------------------------------------------------------------------
sslObjects OBJECT IDENTIFIER ::= { securitySSLGroup 1 }
-- -----------------------------------------------------------------------------
sslServerStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling secure HTTP in the system."
DEFVAL { disable }
::= { sslObjects 1 }
servicePolicyName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the policy for SSL application.
This node is volatile; that is, it is lost if the SNMP
agent is rebooted."
::= { sslObjects 2 }
-- sslCryptoPkiImportCertTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SslCryptoPkiImportCertEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table of importing certificates and key pairs. There will at any
-- time be either 0 or 1 rows in this table, and the only valid index
-- for this table is 1. It is only a table so that we may take
-- advantage of the RowStatus textual convention for configuring the
-- importing parameters.
-- The row in this table is volatile; that is, it is lost if the SNMP
-- agent is rebooted."
-- ::= { sslObjects 3 }
--
-- sslCryptoPkiImportCertEntry OBJECT-TYPE
-- SYNTAX SslCryptoPkiImportCertEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The row in the sslCryptoPkiImportCertTable containing the importing
-- parameters.
-- Once an entry has been activated, the importing parameters cannot be
-- modified. In order to use a new value, you need delete the old entry
-- and create a new one."
-- INDEX { sslCryPkiImportCertIndex }
-- ::= { sslCryptoPkiImportCertTable 1 }
--
-- SslCryptoPkiImportCertEntry ::=
-- SEQUENCE {
-- sslCryPkiImportCertIndex Integer32,
-- sslCryPkiImportCertTrustPoint DisplayString,
-- sslCryPkiImportCertSrcType INTEGER,
-- sslCryPkiImportFilename DisplayString,
-- sslCryPkiImportCertAddrType InetAddressType,
-- sslCryPkiImportCertAddr InetAddress,
-- sslCryPkiImportFileType BITS,
-- sslCryPkiImportPwdPhrase DisplayString,
-- sslCryPkiImportErrorStatus DisplayString,
-- sslCryPkiImportRowStatus RowStatus
-- }
--
-- sslCryPkiImportCertIndex OBJECT-TYPE
-- SYNTAX Integer32 (1)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The index which uniquely identifies this row."
-- ::= { sslCryptoPkiImportCertEntry 1 }
--
-- sslCryPkiImportCertTrustPoint OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..32))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Name of the trustpoint to which the certificates and key pairs
-- will be imported."
-- DEFVAL { "" }
-- ::= { sslCryptoPkiImportCertEntry 2 }
--
-- sslCryPkiImportCertSrcType OBJECT-TYPE
-- SYNTAX INTEGER {
-- filesystem(1),
-- tftp(2) }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "An indication of the source from where the certificates/key pairs
-- will be imported.
-- filesystem(1) - The certificates/key pairs will be imported from the
-- switch's file system.
-- tftp(2) - The certificates/key pairs will be imported via tftp."
-- DEFVAL { tftp }
-- ::= { sslCryptoPkiImportCertEntry 3 }
--
-- sslCryPkiImportFilename OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..64))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "If sslCryPkiImportCertSrcType is 'filesystem', this object
-- indicates the file name and path of the importing certificate
-- and key pairs in switch's file system. The supported file systems
-- are project dependent.
-- If sslCryPkiImportCertSrcType is 'tftp', this object indicates
-- the file name and path where the switch should import via TFTP
-- server. By default, the switch will appends this name with .ca,
-- .prv and .crt for CA certificate, private key and certificate
-- respectively."
-- ::= { sslCryptoPkiImportCertEntry 4 }
--
-- sslCryPkiImportCertAddrType OBJECT-TYPE
-- SYNTAX InetAddressType
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The type of address in the corresponding sslCryPkiImportCertAddr
-- object. "
-- ::= { sslCryptoPkiImportCertEntry 5 }
--
-- sslCryPkiImportCertAddr OBJECT-TYPE
-- SYNTAX InetAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The address of TFTP server."
-- ::= { sslCryptoPkiImportCertEntry 6 }
--
-- sslCryPkiImportPwdPhrase OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..64))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Specifies the encrypted password phrase that is used to undo
-- encryption when the private keys are imported."
-- ::= { sslCryptoPkiImportCertEntry 7 }
--
-- sslCryPkiImportFileType OBJECT-TYPE
-- SYNTAX BITS {
-- ca(0),
-- local(1) }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "An object indicates what kind of certificate will be imported.
-- Setting a type's bit to 1 means the type of certificate will
-- be imported.
-- ca (0) - Import CA certificate
-- local (1) - Import local certificate and key pairs."
-- ::= { sslCryptoPkiImportCertEntry 8 }
--
-- sslCryPkiImportErrorStatus OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "A textual description of the current status of the importing.
-- The status information includes: idle, in progress, success, aborted,
-- idle, corruptFile, no server...."
-- ::= { sslCryptoPkiImportCertEntry 9 }
--
-- sslCryPkiImportRowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this import entry. This object may not be set to
-- 'active' if the following columnar objects exist in this row:
-- sslCryPkiImportCertTrustPoint, sslCryPkiImportFilename, and
-- sslCryPkiImportFileType.
-- Besides, if sslCryPkiImportCertSrcType is 'tftp' the columnar
-- objects sslCryPkiImportCertAddrType and sslCryPkiImportCertAddr
-- must be configured."
-- ::= { sslCryptoPkiImportCertEntry 10 }
--
-- -----------------------------------------------------------------------------
sslConfiguration OBJECT IDENTIFIER ::= { sslObjects 4 }
--
-- sslCryptoPkiTrustpointTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SslCryptoPkiTrustpointEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table defines and configures trustpoint(s) in the switch."
-- ::= { sslConfiguration 1 }
--
-- sslCryptoPkiTrustpointEntry OBJECT-TYPE
-- SYNTAX SslCryptoPkiTrustpointEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The row in the sslCryptoPkiTrustpointTable containing the
-- trustpoint parameters.
-- An entry is created/removed when a name for a specific
-- trustpoint is generated or deleted via CLI or by issuing appropriate
-- sets to this table using snmp."
-- INDEX { sslCryptoPkiTrustpointName }
-- ::= { sslCryptoPkiTrustpointTable 1 }
--
-- SslCryptoPkiTrustpointEntry ::=
-- SEQUENCE {
-- sslCryptoPkiTrustpointName DisplayString,
-- sslCryptoPkiTrustpointPrimary TruthValue,
-- sslCryptoPkiTrustpointRowStatus RowStatus }
--
-- sslCryptoPkiTrustpointName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (1..32))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Name of the trustpoint for which this entry pertains to."
-- ::= { sslCryptoPkiTrustpointEntry 1 }
--
-- sslCryptoPkiTrustpointPrimary OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "This object specifies a given trustpoint as primary.
-- This trustpoint can be used as default trustpoint when
-- the application doesn't explicitly specify which certificate
-- authority (CA) trustpoint should be used.
--
-- Only one trustpoint can be specified as primary. That is the
-- last trustpoint you specify as primary will overwrite the
-- previous one."
-- DEFVAL { false }
-- ::= { sslCryptoPkiTrustpointEntry 2 }
--
-- sslCryptoPkiTrustpointRowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Status of this trustpoint."
-- ::= { sslCryptoPkiTrustpointEntry 3 }
--
----------------------------------------------------------------------------------
-- sslCryptoPkiCertTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SslCryptoPkiCertEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table manages CA certificate(s) or the switch
-- certificate(s) and keys."
-- ::= { sslConfiguration 2 }
--
-- sslCryptoPkiCertEntry OBJECT-TYPE
-- SYNTAX SslCryptoPkiCertEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The row in the sslCryptoPkiCertTable containing the
-- parameters of a certificate.
-- An entry in this table appears automatically whenever
-- the certificate or keypairs is imported successfully.
-- An entry is removed when a certificate name is deleted
-- via CLI or by issuing appropriate sets to this table using snmp."
-- INDEX { sslCryptoPkiCertTrustpointName,sslCryptoPkiCertName }
-- ::= { sslCryptoPkiCertTable 1 }
--
-- SslCryptoPkiCertEntry ::=
-- SEQUENCE {
-- sslCryptoPkiCertTrustpointName DisplayString,
-- sslCryptoPkiCertName DisplayString,
-- sslCryptoPkiCertCAType INTEGER,
-- sslCryptoPkiCertRemoveCtrl INTEGER }
--
-- sslCryptoPkiCertTrustpointName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (1..32))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Name of the trustpoint for which this entry pertains to."
-- ::= { sslCryptoPkiCertEntry 1 }
--
-- sslCryptoPkiCertName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..32))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates the name of the certificate for which this entry
-- pertains to."
-- ::= { sslCryptoPkiCertEntry 2 }
--
-- sslCryptoPkiCertCAType OBJECT-TYPE
-- SYNTAX INTEGER {
-- ca(1),
-- localCertificate(2),
-- localPrivateKey(3) }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object specifies the type of the certificate.
-- ca(1) - CA certificate.
-- localCertificate(2) - local certificate.
-- localPrivateKey(3) - local private key."
-- ::= { sslCryptoPkiCertEntry 3 }
--
-- sslCryptoPkiCertRemoveCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- delete(1),
-- noOp(2) }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object is used to delete this entry.
-- No action is taken if this object is set to 'noOp'.
-- When read, the value 'noOp' is returned."
-- ::= { sslCryptoPkiCertEntry 4 }
--
-- -----------------------------------------------------------------------------
sslServicePolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SslServicePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table controlls the parameters of SSL service policies."
::= { sslConfiguration 3 }
sslServicePolicyEntry OBJECT-TYPE
SYNTAX SslServicePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the dSslServicePolicyTable containing the
parameters of a SSL service policy.
An entry is created/removed when a name for a specific
policy is generated or deleted via CLI or by issuing appropriate
sets to this table using snmp."
INDEX { sslServicePolicyName }
::= { sslServicePolicyTable 1 }
SslServicePolicyEntry ::=
SEQUENCE {
sslServicePolicyName DisplayString,
sslServicePolicyCipherSuites BITS,
-- sslServicePolicyTrustpoint DisplayString,
sslServicePolicyCacheTimeout Unsigned32,
sslServicePolicyRowStatus RowStatus
}
sslServicePolicyName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the policy for which this entry pertains to."
::= { sslServicePolicyEntry 1 }
sslServicePolicyCipherSuites OBJECT-TYPE
SYNTAX BITS{
rsa-null-md5(0),
rsa-null-sha(1),
rsa-des-sha(2),
rsa-3des-sha(3),
dh-rsa-des-sha(4),
dh-rsa-3des-sha(5),
rsa-exp1024-des-sha(6),
rsa-with-aes-128-cbc-sha(7),
rsa-with-aes-256-cbc-sha(8),
dhe-rsa-with-aes-128-cbc-sha(9),
dhe-rsa-with-aes-256-cbc-sha(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the cipher-suites list.
This field is a bit mask, setting a bit indicates that the
corresponding cipher-list will be involved in the server
authentication.
In the FIPS (American Security Standard Mode) Mode,
Only the following cipher list should be supported.
TLS_RSA_3DES_SHA1
TLS_ DHE_RSA_3DES_SHA1
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
hence the default value in FIPS mode will be
TLS_RSA_3DES_SHA1 | TLS_ DHE_RSA_3DES_SHA1 | TLS_RSA_WITH_AES_128_CBC_SHA |
TLS_RSA_WITH_AES_256_CBC_SHA | TLS_DHE_RSA_WITH_AES_128_CBC_SHA |
TLS_DHE_RSA_WITH_AES_256_CBC_SHA"
::= { sslServicePolicyEntry 2}
-- sslServicePolicyTrustpoint OBJECT-TYPE
-- SYNTAX DisplayString (SIZE (0..32))
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Specifies the name of the trustpoint that should be used in SSL
-- handshake.
--
-- When secure-trustpoint is not specified, the primary trustpoint
-- (the value of sslCryptoPkiTrustpointPrimary is 'true') will be
-- used.
--
-- If no trustpoint is specified (empty string), the built-in
-- certificate/key pairs will be used."
-- ::= { sslServicePolicyEntry 3 }
sslServicePolicyCacheTimeout OBJECT-TYPE
SYNTAX Unsigned32 (60..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the Cache Timeout value in the policy for
SSL module to refresh the session resume data kept in database."
DEFVAL { 600 }
::= { sslServicePolicyEntry 4}
sslServicePolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this policy."
::= { sslServicePolicyEntry 5 }
-- ---------------------------------------------------------------------
-- DHCP Server Screening
-- ---------------------------------------------------------------------
dhcpSerScrGlobSettings OBJECT IDENTIFIER ::= { securityDhcpSerScrGroup 1 }
dhcpSerScrPortSettings OBJECT IDENTIFIER ::= { securityDhcpSerScrGroup 2 }
dhcpSerScrTraps OBJECT IDENTIFIER ::= { securityDhcpSerScrGroup 3 }
-- ---------------------------------------------------------------------
-- DHCP Server Screening Global Settings
-- ---------------------------------------------------------------------
dhcpSerScrGlobTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Server Screening Global Settings. Trap State."
::= { dhcpSerScrGlobSettings 1 }
dhcpSerScrLogBufEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Server Screening Global Settings. Log Buffer Entries."
::= { dhcpSerScrGlobSettings 2}
dhcpSerScrLogClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears the buffered logs.
This object is set to 'false' by default.
When set to 'True', the buffered logs will be cleared and the value
of this object will become 'false' again."
::= { dhcpSerScrGlobSettings 3}
--dhcp server screening profile settings
dhcpSerScrProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSerScrProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure dhcp server screen profile information."
::= { dhcpSerScrGlobSettings 4 }
dhcpSerScrProfileEntry OBJECT-TYPE
SYNTAX DhcpSerScrProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries to configure dhcp server screen profile information."
INDEX { dhcpSerScrProfileName, dhcpSerScrProfileClientMac }
::= { dhcpSerScrProfileTable 1 }
DhcpSerScrProfileEntry ::=
SEQUENCE {
dhcpSerScrProfileName DisplayString,
dhcpSerScrProfileClientMac MacAddress,
dhcpSerScrProfileRowStatus RowStatus
}
dhcpSerScrProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSS Profile name."
::= { dhcpSerScrProfileEntry 1}
dhcpSerScrProfileClientMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSS Profile Client MAC."
::= { dhcpSerScrProfileEntry 2 }
dhcpSerScrProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of an entry in the dhcp server screen profile Table."
::= { dhcpSerScrProfileEntry 3 }
--dhcp server screening log table
dhcpSerScrLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSerScrLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Log Entries in the table are automatically created when dhcp server
screen violation occurence."
::= { dhcpSerScrGlobSettings 5 }
dhcpSerScrLogEntry OBJECT-TYPE
SYNTAX DhcpSerScrLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dhcpSerScrLogTable. Entries are automatically created
whenever dhcp server screen violation occurence."
INDEX { dhcpSerScrLogIndex }
::= { dhcpSerScrLogTable 1 }
DhcpSerScrLogEntry ::=
SEQUENCE {
dhcpSerScrLogIndex Unsigned32,
dhcpSerScrLogVlanID INTEGER,
dhcpSerScrLogIPAddr InetAddress,
dhcpSerScrLogMacAddr MacAddress,
dhcpSerScrLogOccurrence DisplayString
}
dhcpSerScrLogIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dhcp server screening log entry index."
::= { dhcpSerScrLogEntry 1 }
dhcpSerScrLogVlanID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"dhcp server screening log vlan id infomation."
::= { dhcpSerScrLogEntry 2 }
dhcpSerScrLogIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"dhcp server screening log ip infomation."
::= { dhcpSerScrLogEntry 3 }
dhcpSerScrLogMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"dhcp server screening log mac address infomation."
::= { dhcpSerScrLogEntry 4 }
dhcpSerScrLogOccurrence OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"dhcp server screening log occurrence infomation."
::= { dhcpSerScrLogEntry 5 }
-- ---------------------------------------------------------------------
-- DHCP Server Screening Port Settings
-- ---------------------------------------------------------------------
dhcpSerScrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSerScrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of DHCP Server Screening Port Settings."
::= { dhcpSerScrPortSettings 1 }
dhcpSerScrPortEntry OBJECT-TYPE
SYNTAX DhcpSerScrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of DHCP Server Screening Port Settings entry."
INDEX { dhcpSerScrPortIndex }
::= { dhcpSerScrPortTable 1 }
DhcpSerScrPortEntry ::= SEQUENCE {
dhcpSerScrPortIndex Integer32,
dhcpSerScrPortState INTEGER,
dhcpSerScrPortServerAddrType InetAddressType,
dhcpSerScrPortServerIP InetAddress,
dhcpSerScrPortProfileName DisplayString
}
dhcpSerScrPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP Server Screening Port Settings . Port."
::= { dhcpSerScrPortEntry 1 }
dhcpSerScrPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Server Screening Port Settings. State."
::= { dhcpSerScrPortEntry 2 }
dhcpSerScrPortServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Server Screening IP Type: IPv4/IPv6."
::= { dhcpSerScrPortEntry 3 }
dhcpSerScrPortServerIP OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Server Screening Port Settings. Server IP."
::= { dhcpSerScrPortEntry 4 }
dhcpSerScrPortProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Server Screening Port Settings. Profile Name."
::= { dhcpSerScrPortEntry 5 }
-- ---------------------------------------------------------------------
-- DHCP Server Screening traps
-- ---------------------------------------------------------------------
dhcpSerScrTrapList OBJECT IDENTIFIER ::= { dhcpSerScrTraps 0 }
dhcpSerScrAttackDetect NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This is a trap that will send to snmp manager,and it will be generated when the forge dhcp server
packets received when dhcp server screening is enable for this port."
::= {dhcpSerScrTrapList 1 }
userAccountsManagementSettings OBJECT IDENTIFIER ::= { mgtUserAccountGroup 1 }
userAccountsSessionTable OBJECT IDENTIFIER ::= { mgtUserAccountGroup 2 }
-- ---------------------------------------------------------------------
-- User Management Settings
-- ---------------------------------------------------------------------
userAccountsTable OBJECT-TYPE
SYNTAX SEQUENCE OF UserAccountsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to User Accounts Settings. User Management Settings."
::= { userAccountsManagementSettings 1 }
userAccountsEntry OBJECT-TYPE
SYNTAX UserAccountsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in User Accounts Settings. User Management Settings."
INDEX { userName }
::= { userAccountsTable 1 }
UserAccountsEntry ::=
SEQUENCE {
userName SnmpAdminString,
userPrivilege Unsigned32,
userEncryptControl INTEGER,
userPassword DisplayString,
userRowStatus RowStatus
}
userName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of user entry."
::= { userAccountsEntry 1 }
userPrivilege OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User Management Settings. Privilege (1-15)"
::= { userAccountsEntry 2 }
userEncryptControl OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Encrypt of user password."
DEFVAL { disable }
::= { userAccountsEntry 3 }
userPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password of user entry.
0 means no password."
::= { userAccountsEntry 4 }
userRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status of user Accounts Entry."
::= { userAccountsEntry 5 }
-- ---------------------------------------------------------------------
-- Session Table
-- ---------------------------------------------------------------------
userSessionTableEntry OBJECT-TYPE
SYNTAX SEQUENCE OF UserSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Session Table contain the user login information."
::= { userAccountsSessionTable 1 }
userSessionEntry OBJECT-TYPE
SYNTAX UserSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Session Table contain the user login information."
INDEX { sessionID }
::= { userSessionTableEntry 1 }
UserSessionEntry ::= SEQUENCE {
sessionID Unsigned32,
liveTime TimeTicks,
loginType INTEGER,
loginIP InetAddress,
loginUserLevel INTEGER,
loginUserName DisplayString
}
sessionID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of session table."
::= { userSessionEntry 1 }
liveTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time peroid user has kept login."
::= { userSessionEntry 2 }
loginType OBJECT-TYPE
SYNTAX INTEGER {
http(1),
telnet(2),
ssh(3),
console(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"login client of http, telnet, ssh or console."
::= { userSessionEntry 3 }
loginIP OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"login ip through http, ssh, or telnet."
::= { userSessionEntry 4 }
loginUserLevel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level of session which user login."
::= { userSessionEntry 5 }
loginUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of login user."
::= { userSessionEntry 6 }
-- ------------------------------------------------------------------
-- Trusted Host
-- ------------------------------------------------------------------
trustedHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrustedHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure trusted host in the system."
::= { securityTrustedHostGroup 1 }
trustedHostEntry OBJECT-TYPE
SYNTAX TrustedHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents rules for particular
trusted host."
INDEX { trustedHostType, trustedHostACLName }
::= { trustedHostTable 1 }
TrustedHostEntry ::=
SEQUENCE {
trustedHostType
INTEGER,
trustedHostACLName
DisplayString,
trustedHostRowStatus
RowStatus
}
trustedHostType OBJECT-TYPE
SYNTAX INTEGER {
telnet (1),
ping (2),
http (3),
https (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of trusted host."
::= { trustedHostEntry 1 }
trustedHostACLName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL access list name."
::= { trustedHostEntry 2 }
trustedHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of an entry in the Trusted Host Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available."
::= { trustedHostEntry 3 }
stormCtrlMIBObjects OBJECT IDENTIFIER ::= { securityStormCtrlGroup 1 }
-- --------------------------------------------------------------------------
stormCtrlGentrl OBJECT IDENTIFIER ::= { stormCtrlMIBObjects 1 }
stormCtrlNotifyEnable OBJECT-TYPE
SYNTAX INTEGER {
none (0),
stormOccurred (1),
stormCleared (2),
both (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls when a storm control notification will be generated.
If the object is set to
none(0): No notifications will be generated.
stormOccurred(1): A notification will be generated when a storm event is
detected.
stormCleared(2): A notification will be generated when a storm event is
cleared.
both (3): A notification will be generated both when a storm event is
detected and cleared.
NOTE:The default value of this object is none(0)."
::= { stormCtrlGentrl 1}
stormCtrlPollingInterval OBJECT-TYPE
SYNTAX Integer32 (5..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval, in seconds, the switch detects the storm."
DEFVAL { 5 }
::= { stormCtrlGentrl 2}
stormCtrlPollingRetries OBJECT-TYPE
SYNTAX Integer32 (-1 | 0 | 1.. 360)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the retry count. If the action is configured
as 'shutdown' mode and storm keep as long as
interval * retries, the port will enters error-disabled state.
The effective range is from 1 to 360.
0 means that a 'shutdown' mode port will directly enter
error-disabled state when storm is detected.
-1 means that a 'shutdown' mode port will never enter
error-disabled state even if storm is detected."
DEFVAL { 3 }
::= { stormCtrlGentrl 3}
stormCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF StormCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic control table."
::= { stormCtrlGentrl 4 }
stormCtrlEntry OBJECT-TYPE
SYNTAX StormCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic control entry."
INDEX { stormCtrlIndex }
::= { stormCtrlTable 1 }
StormCtrlEntry ::=
SEQUENCE {
stormCtrlIndex
Integer32,
stormCtrlActionMode
INTEGER,
stormCtrlLevelType
INTEGER
}
stormCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic control index."
::= { stormCtrlEntry 1 }
stormCtrlActionMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
drop(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action mode of traffic control."
::= { stormCtrlEntry 2 }
stormCtrlLevelType OBJECT-TYPE
SYNTAX INTEGER {
pps(1),
kbps(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Traffic control level type: pps or kbps."
DEFVAL { pps }
::= { stormCtrlEntry 3 }
-- --------------------------------------------------------------------------
stormCtrlThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF StormCtrlThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic control table."
::= { stormCtrlGentrl 5 }
stormCtrlThresholdEntry OBJECT-TYPE
SYNTAX StormCtrlThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic control entry."
INDEX { stormCtrlThresholdIndex, stormCtrlThresholdType}
::= { stormCtrlThresholdTable 1 }
StormCtrlThresholdEntry ::=
SEQUENCE {
stormCtrlThresholdIndex
Integer32,
stormCtrlThresholdType
INTEGER,
stormCtrlThresholdRiseThre
Integer32,
stormCtrlThresholdLowThre
Integer32,
stormCtrlThresholdCurrRate
Integer32,
stormCtrlThresholdStormState
INTEGER
}
stormCtrlThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic control index."
::= { stormCtrlThresholdEntry 1 }
stormCtrlThresholdType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
multicast(2),
unicast(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The control type of traffic control."
::= { stormCtrlThresholdEntry 2 }
stormCtrlThresholdRiseThre OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rise threshold of traffic control."
::= { stormCtrlThresholdEntry 3 }
stormCtrlThresholdLowThre OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low threshold of traffic control."
::= { stormCtrlThresholdEntry 4 }
stormCtrlThresholdCurrRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current rate of traffic control."
::= { stormCtrlThresholdEntry 5 }
stormCtrlThresholdStormState OBJECT-TYPE
SYNTAX INTEGER {
forwarding(1),
dropped(2),
errorDisabled(3),
linkDown(4),
inactive(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current status of storm control on a
given interface for a given traffic type."
::= { stormCtrlThresholdEntry 6 }
stormCtrlTraps OBJECT IDENTIFIER ::= { stormCtrlGentrl 6 }
stormCtrlTrapsList OBJECT IDENTIFIER ::= { stormCtrlTraps 0 }
stormCtrlTrapsStormOccur NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This is a trap that will send to snmp manager,and it will be generated when storm is occured."
::= {stormCtrlTrapsList 1 }
stormCtrlTrapsStormClear NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This is a trap that will send to snmp manager,and it will be generated when port is cleared."
::= {stormCtrlTrapsList 2 }
syslogMIBObjects OBJECT IDENTIFIER ::= { syslogGroup 1 }
-- -----------------------------------------------------------------------------
syslogGeneral OBJECT IDENTIFIER ::= { syslogMIBObjects 1 }
syslogSourceInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the source address of the SYSLOG packet should be assign or not.
If enable, the VLAN ID of the interface whose IP address
will be used as the source address for sending the SYSLOG packet.
If disable, the IP address of the closest interface will be used."
DEFVAL { enabled }
::= { syslogGeneral 1 }
syslogSourceInterfaceVID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the interface whose IP address
will be used as the source address for sending the SYSLOG packet."
DEFVAL { 1 }
::= { syslogGeneral 2 }
-- -----------------------------------------------------------------------------
syslogLogbuffer OBJECT IDENTIFIER ::= { syslogMIBObjects 2 }
syslogClearLogBuffer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears the buffered logs. This object is set to 'false' by default.
When set to 'True', the buffered logs will be cleared and the value
of this object will become 'false' again."
DEFVAL { false }
::= { syslogLogbuffer 1 }
syslogLogBufferEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the state of logging system messages to the
local buffer.
Messages must enter the local message buffer first before it can
be further dispatched to other destinations.
"
DEFVAL { enable }
::= { syslogLogbuffer 2 }
syslogLogBufSeverity OBJECT-TYPE
SYNTAX INTEGER{
emergencies(0),
alerts(1),
critical(2),
errors(3),
warnings(4),
notifications(5),
informational(6),
debugging(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the severity level of system messages.
The messages at that severity level or a more severe level will be
logged to message buffers.
"
::= { syslogLogbuffer 3 }
syslogLogBufWriteDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the interval for periodic writing of the
logging buffer to FLASH. The valid value is N to 65535.
N is project dependent. The default interval is 300 seconds.
Setting this object to -1 means infinite which will disable
periodical writing logging buffer to FLASH.
Setting this object to 0 means writing logging buffer
to flash by trigger way.
"
::= { syslogLogbuffer 4 }
-- -----------------------------------------------------------------------------
syslogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table consists of a list of SYSLOG servers to log system messages
and debug output to a remote SYSLOG server host."
::= { syslogMIBObjects 5 }
syslogServerEntry OBJECT-TYPE
SYNTAX SyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defines information for a SYSLOG server.
"
INDEX { syslogServerIndex }
::= { syslogServerTable 1 }
SyslogServerEntry ::= SEQUENCE {
syslogServerIndex Integer32,
syslogServerAddressType InetAddressType,
syslogServerAddress InetAddress,
syslogServerPort INTEGER,
syslogServerSeverity INTEGER,
syslogServerFacility INTEGER,
syslogServerRowstatus RowStatus
}
syslogServerIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the server config entry index."
::= { syslogServerEntry 1 }
syslogServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of the server address."
::= { syslogServerEntry 2 }
syslogServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the IP or IPv6 address of the SYSLOG server."
::= { syslogServerEntry 3 }
syslogServerPort OBJECT-TYPE
SYNTAX INTEGER (514 | 1024..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the UDP port number to be used for the
SYSLOG server.
"
DEFVAL { 514 }
::= { syslogServerEntry 4 }
syslogServerSeverity OBJECT-TYPE
SYNTAX INTEGER{
emergencie(0),
alerts(1),
critical(2),
error(3),
warning(4),
notification(5),
informational(6),
debugging(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the severity of log messages that will be
sent to the server."
DEFVAL { warning }
::= { syslogServerEntry 5 }
syslogServerFacility OBJECT-TYPE
SYNTAX INTEGER {
kern(0), -- kernel messages
user(1), -- user-level messages
mail(2), -- mail system messages
daemon(3), -- system daemons' messages
auth(4), -- authorization messages
syslog(5), -- messages generated internally by syslogd
lpr(6), -- line printer subsystem messages
news(7), -- network news subsystem messages
uucp(8), -- UUCP subsystem messages
cron(9), -- clock daemon messages
authpriv(10), -- security/authorization messages
ftp(11), -- ftp daemon messages
ntp(12), -- NTP subsystem messages
audit(13), -- audit messages
console(14), -- console messages
cron2(15), -- clock daemon messages
local0(16), --Reserved local use
local1(17), --Reserved local use
local2(18), --Reserved local use
local3(19), --Reserved local use
local4(20), --Reserved local use
local5(21), --Reserved local use
local6(22), --Reserved local use
local7(23) --Reserved local use
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the logging facility of the log host.
"
DEFVAL { kern }
::= { syslogServerEntry 6 }
syslogServerRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to installation
and removal conventions for conceptual rows."
::= { syslogServerEntry 7 }
-- -----------------------------------------------------------------------------
syslogBufferTableNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of entries presented in the
syslogBufferTable."
::= { syslogMIBObjects 6 }
syslogBufferTable OBJECT-TYPE
SYNTAX SEQUENCE OF SyslogBufferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table consists of a list of system log messages."
::= { syslogMIBObjects 7 }
syslogBufferEntry OBJECT-TYPE
SYNTAX SyslogBufferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defines a log message."
INDEX { syslogBufferIndex }
::= { syslogBufferTable 1 }
SyslogBufferEntry ::= SEQUENCE {
syslogBufferIndex Unsigned32,
syslogBufferDateAndTime DisplayString,
syslogBufferDescription DisplayString,
syslogBufferSeverity INTEGER
}
syslogBufferIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies the message."
::= { syslogBufferEntry 1 }
syslogBufferDateAndTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the message is logged."
::= { syslogBufferEntry 2 }
syslogBufferDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The content of the log message."
::= { syslogBufferEntry 3 }
syslogBufferSeverity OBJECT-TYPE
SYNTAX INTEGER{
emergencie(0),
alerts(1),
critical(2),
error(3),
warning(4),
notification(5),
informational(6),
debugging(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the severity of log messages that will be
sent to the server."
::= { syslogBufferEntry 4 }
-- ------------------------------------------------------------------
-- Mirror Settings
-- ------------------------------------------------------------------
mirrorSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF MirrorSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to Session Table."
::= { monMirrorGroup 1 }
mirrorSessionEntry OBJECT-TYPE
SYNTAX MirrorSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in Session Table."
INDEX { mirrorSessionNumber }
::= { mirrorSessionTable 1 }
MirrorSessionEntry ::=
SEQUENCE {
mirrorSessionNumber Integer32,
mirrorDestinationPort Integer32,
mirrorSourceIngressPort PortList,
mirrorSourceEgressPort PortList,
mirrorSessionRowStatus RowStatus
}
mirrorSessionNumber OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the port to which the mirrored traffic in the system
is to be copied."
::= { mirrorSessionEntry 1 }
mirrorDestinationPort OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mirror Settings. Destination port."
::= { mirrorSessionEntry 2 }
mirrorSourceIngressPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port index."
::= { mirrorSessionEntry 3 }
mirrorSourceEgressPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port index."
::= { mirrorSessionEntry 4 }
mirrorSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the validity of the entry, max entry number is 4."
::= { mirrorSessionEntry 5 }
statisticsCounters OBJECT IDENTIFIER ::= { monStatisticsGroup 1 }
statisticsErrorCounters OBJECT IDENTIFIER ::= { monStatisticsGroup 2 }
statisticsClear OBJECT IDENTIFIER ::= { monStatisticsGroup 3 }
-- --------------------------------------------------------------------
-- statistics normal counters
-- --------------------------------------------------------------------
statisticsCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface entries. The number of entries is
given by the value of ifNumber."
::= { statisticsCounters 1 }
statisticsCountersEntry OBJECT-TYPE
SYNTAX StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable to a
particular interface."
INDEX { statPort }
::= { statisticsCountersTable 1 }
StatisticsEntry ::=
SEQUENCE {
statPort InterfaceIndex,
statPortRxRateBytes Counter32,
statPortRxRatePackets Counter32,
statPortRxTotalBytes Counter64,
statPortRxTotalPackets Counter64,
statPortTxRateBytes Counter32,
statPortTxRatePackets Counter32,
statPortTxTotalBytes Counter64,
statPortTxTotalPackets Counter64,
statPortRxMulticast Counter64,
statPortRxUnicast Counter64,
statPortRxBroadcast Counter64,
statPortTxMulticast Counter64,
statPortTxUnicast Counter64,
statPortTxBroadcast Counter64,
statCountersrxHCPkt64Octets Counter64,
statCountersrxHCPkt65to127Octets Counter64,
statCountersrxHCPkt128to255Octets Counter64,
statCountersrxHCPkt256to511Octets Counter64,
statCountersrxHCPkt512to1023Octets Counter64,
statCountersrxHCPkt1024to1518Octets Counter64,
statCountersrxHCPkt1519to2047Octets Counter64,
statCountersrxHCPkt2048to4095Octets Counter64,
statCountersrxHCPkt4096to9216Octets Counter64,
statCounterstxHCPkt64Octets Counter64,
statCounterstxHCPkt65to127Octets Counter64,
statCounterstxHCPkt128to255Octets Counter64,
statCounterstxHCPkt256to511Octets Counter64,
statCounterstxHCPkt512to1023Octets Counter64,
statCounterstxHCPkt1024to1518Octets Counter64,
statCounterstxHCPkt1519to2047Octets Counter64,
statCounterstxHCPkt2048to4095Octets Counter64,
statCounterstxHCPkt4096to9216Octets Counter64
}
statPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { statisticsCountersEntry 1 }
statPortRxRateBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port RX Rate bytes/sec."
::= { statisticsCountersEntry 2 }
statPortRxRatePackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port RX Rate Packets/sec."
::= { statisticsCountersEntry 3 }
statPortRxTotalBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Rx Total Bytes/sec."
::= { statisticsCountersEntry 4 }
statPortRxTotalPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Rx Total Packets/sec."
::= { statisticsCountersEntry 5 }
statPortTxRateBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Tx Rate Bytes/sec."
::= { statisticsCountersEntry 6 }
statPortTxRatePackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Tx Rate Packets/sec."
::= { statisticsCountersEntry 7 }
statPortTxTotalBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Tx Total Bytes/sec."
::= { statisticsCountersEntry 8 }
statPortTxTotalPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Tx Total Packets."
::= { statisticsCountersEntry 9 }
statPortRxMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Rx multicast Packets."
::= { statisticsCountersEntry 10 }
statPortRxUnicast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Rx unicast Packets."
::= { statisticsCountersEntry 11 }
statPortRxBroadcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Rx broadcast Packets."
::= { statisticsCountersEntry 12 }
statPortTxMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Tx multicast Packets."
::= { statisticsCountersEntry 13 }
statPortTxUnicast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Tx unicast Packets."
::= { statisticsCountersEntry 14 }
statPortTxBroadcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Tx broadcast Packets."
::= { statisticsCountersEntry 15 }
statCountersrxHCPkt64Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 16 }
statCountersrxHCPkt65to127Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 17 }
statCountersrxHCPkt128to255Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 18 }
statCountersrxHCPkt256to511Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 19 }
statCountersrxHCPkt512to1023Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 20 }
statCountersrxHCPkt1024to1518Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 21 }
statCountersrxHCPkt1519to2047Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 22 }
statCountersrxHCPkt2048to4095Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 23 }
statCountersrxHCPkt4096to9216Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 24 }
statCounterstxHCPkt64Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 25 }
statCounterstxHCPkt65to127Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 26 }
statCounterstxHCPkt128to255Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 27 }
statCounterstxHCPkt256to511Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 28 }
statCounterstxHCPkt512to1023Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 29 }
statCounterstxHCPkt1024to1518Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 30 }
statCounterstxHCPkt1519to2047Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 31 }
statCounterstxHCPkt2048to4095Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 32 }
statCounterstxHCPkt4096to9216Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsCountersEntry 33 }
-- --------------------------------------------------------------------
-- statistics error Counters
-- --------------------------------------------------------------------
statisticsErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatisticsErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface entries. The number of entries is
given by the value of ifNumber."
::= { statisticsErrorCounters 1 }
statisticsErrorEntry OBJECT-TYPE
SYNTAX StatisticsErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable to a
particular interface."
INDEX { statPortCountPort }
::= { statisticsErrorTable 1 }
StatisticsErrorEntry ::=
SEQUENCE {
statPortCountPort InterfaceIndex,
statCountersrxDroppkts Counter32,
statCountersrxMTUDropPkts Counter32,
statPortCountDeferredTx Counter32,
statCountersdot3StatsSingleColFrames Counter32,
statPortCountExcessCol Counter32,
statPortCountLateCol Counter32,
statPortCountAlignErr Counter32,
statPortCountFCSErr Counter32,
statCountersifOutDiscards Counter32,
statPortCountMultiCol Counter32,
statPortCountCarriSen Counter32,
statPortCountSQETestErr Counter32,
statCountersdot3StatsDeferredTransmisions Counter32,
statPortCountIntMacTx Counter32,
statPortCountIntMacRx Counter32,
statCountersrxCRCAlignErrors Counter32,
statCountersrxUndersizedPkts Counter32,
statCountersrxOversizedPkts Counter32,
statCountersrxFragmentPkts Counter32,
statCountersrxJabbers Counter32,
statCountersrxSymbolErrors Counter32,
statCountersrxMulticastDropPkts Counter32,
statCountersifInErrors Counter32,
statCountersifOutErrors Counter32,
statCountersifInDiscards Counter32,
statCountersifInUnknownProtos Counter32,
statCounterstxDelayExceededDiscards Counter32
}
statPortCountPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization."
::= { statisticsErrorEntry 1 }
statCountersrxDroppkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 2 }
statCountersrxMTUDropPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 3 }
statPortCountDeferredTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames for which the first
transmission attempt on a particular interface
is delayed because the medium is busy.
The count represented by an instance of this
object does not include frames involved in
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { statisticsErrorEntry 4 }
statCountersdot3StatsSingleColFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 5 }
statPortCountExcessCol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames for which transmission on a
particular interface fails due to excessive
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.11,
aFramesAbortedDueToXSColls."
::= { statisticsErrorEntry 6 }
statPortCountLateCol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times that a collision is
detected on a particular interface later than
one slotTime into the transmission of a packet.
A (late) collision included in a count
represented by an instance of this object is
also considered as a (generic) collision for
purposes of other collision-related
statistics.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.10,
aLateCollisions."
::= { statisticsErrorEntry 7 }
statPortCountAlignErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 8 }
statPortCountFCSErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check. This
count does not include frames received with
frame-too-long or frame-too-short error.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
Note: Coding errors detected by the physical
layer for speeds above 10 Mb/s will cause the
frame to fail the FCS check.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsFCSErrors object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.6,
aFrameCheckSequenceErrors."
::= { statisticsErrorEntry 9 }
statCountersifOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 10 }
statPortCountMultiCol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 11 }
statPortCountCarriSen OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { statisticsErrorEntry 12 }
statPortCountSQETestErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 13 }
statCountersdot3StatsDeferredTransmisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 14 }
statPortCountIntMacTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames for which transmission on a
particular interface fails due to an internal
MAC sublayer transmit error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the dot3StatsLateCollisions object, the
dot3StatsExcessiveCollisions object, or the
dot3StatsCarrierSenseErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of transmission
errors on a particular interface that are not
otherwise counted.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsInternalMacTransmitErrors object for
10 Gb/s or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.12,
aFramesLostDueToIntMACXmitError."
::= { statisticsErrorEntry 15 }
statPortCountIntMacRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the dot3StatsFrameTooLongs object, the
dot3StatsAlignmentErrors object, or the
dot3StatsFCSErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of receive errors
on a particular interface that are not
otherwise counted.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsInternalMacReceiveErrors object for
10 Gb/s or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.15,
aFramesLostDueToIntMACRcvError."
::= { statisticsErrorEntry 16 }
statCountersrxCRCAlignErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 17 }
statCountersrxUndersizedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 18 }
statCountersrxOversizedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 19 }
statCountersrxFragmentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 20 }
statCountersrxJabbers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 21 }
statCountersrxSymbolErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 22 }
statCountersrxMulticastDropPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 23 }
statCountersifInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 24 }
statCountersifOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 25 }
statCountersifInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 26 }
statCountersifInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 27 }
statCounterstxDelayExceededDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { statisticsErrorEntry 28 }
----------------------------------------------------------------------------------------------
-- the Interfaces table
statisticsCounterClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatCounterClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface entries. The number of entries is
given by the value of ifNumber."
::= { statisticsClear 1 }
statisticsCounterClearEntry OBJECT-TYPE
SYNTAX StatCounterClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable to a
particular interface."
INDEX { statCounterClearIndex }
::= { statisticsCounterClearTable 1 }
StatCounterClearEntry ::=
SEQUENCE {
statCounterClearIndex INTEGER,
statCounterClearStatus INTEGER,
statCounterLinkChange INTEGER
}
statCounterClearIndex OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization."
::= { statisticsCounterClearEntry 1 }
statCounterClearStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable statCounter Counters Clear on read by port."
::= { statisticsCounterClearEntry 2 }
statCounterLinkChange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter the linkchange times by port."
::= { statisticsCounterClearEntry 3 }
-- ---------------------------------------------------------------------
-- DDM
-- ---------------------------------------------------------------------
fdbStaticFDB OBJECT IDENTIFIER ::= { l2FDBGroup 1 }
fdbMACAddressTableSettings OBJECT IDENTIFIER ::= { l2FDBGroup 2 }
-- fdbMACNotification OBJECT IDENTIFIER ::= { l2FDBGroup 5 }
-- ---------------------------------------------------------------------
-- Static FDB
-- ---------------------------------------------------------------------
fdbUnicastStaticFDB OBJECT IDENTIFIER ::= { fdbStaticFDB 1 }
fdbMulticastStaticFDB OBJECT IDENTIFIER ::= { fdbStaticFDB 2 }
-- ---------------------------------------------------------------------
-- Unicast Static FDB
-- ---------------------------------------------------------------------
fdbUnicastStaticFDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbUnicastStaticFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast Static FDB ."
::= { fdbUnicastStaticFDB 1 }
fdbUnicastStaticFDBEntry OBJECT-TYPE
SYNTAX FdbUnicastStaticFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast Static FDB ."
INDEX { fdbUnicastStaticFDBVID, fdbUnicastStaticFDBMACAddr }
::= { fdbUnicastStaticFDBTable 1 }
FdbUnicastStaticFDBEntry ::=
SEQUENCE {
fdbUnicastStaticFDBVID
Integer32,
fdbUnicastStaticFDBMACAddr
MacAddress,
fdbUnicastStaticFDBPort
InterfaceIndex,
fdbUnicastStaticFDBState
INTEGER,
fdbUnicastStaticFDBRowStatus
RowStatus
}
fdbUnicastStaticFDBVID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Static FDB. VID (1-4094)."
::= { fdbUnicastStaticFDBEntry 1 }
fdbUnicastStaticFDBMACAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Static FDB. MAC Address."
::= { fdbUnicastStaticFDBEntry 2 }
fdbUnicastStaticFDBPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unicast Static FDB. port."
::= { fdbUnicastStaticFDBEntry 3 }
fdbUnicastStaticFDBState OBJECT-TYPE
SYNTAX INTEGER {
permanent(1),
permanentDrop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
permanent(1) - this entry is currently in use
and will remain so after the next reset of
the bridge.
permanentDrop(2) - This entry will filter the packet with the specified
MAC address as the source MAC or as the destination MAC.
The entry is currently in use and will remain so after the
next reboot of the device."
DEFVAL { permanent }
::= { fdbUnicastStaticFDBEntry 4 }
fdbUnicastStaticFDBRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of fdbUnicastStaticFDBTable
to which a frame with a specific unicast
address will be flooded in the event that it has not
been learned. To set fdbUnicastStaticFDBPort,
we have to set the rowstatus as 'NOT_IN_SERVICE' and
set the appropriate port in the
fdbUnicastStaticFDBPort and set the rowstatus as
'ACTIVE' to make the port available."
::= { fdbUnicastStaticFDBEntry 5 }
-- ---------------------------------------------------------------------
-- Multicast Static FDB
-- ---------------------------------------------------------------------
fdMulticastStaticFDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbMulticastStaticFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast Static FDB ."
::= { fdbMulticastStaticFDB 1 }
fdbMulticastStaticFDBEntry OBJECT-TYPE
SYNTAX FdbMulticastStaticFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast Static FDB ."
INDEX { fdbMulticastStaticFDBVID, fdbMulticastStaticFDBMACAddr}
::= { fdMulticastStaticFDBTable 1 }
FdbMulticastStaticFDBEntry ::=
SEQUENCE {
fdbMulticastStaticFDBVID
Integer32,
fdbMulticastStaticFDBMACAddr
MacAddress,
fdbMulticastStaticFDBEgressPorts
PortList,
fdbMulticastStaticFDBRowStatus
RowStatus
}
fdbMulticastStaticFDBVID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Static FDB. VID (1-4094)."
::= { fdbMulticastStaticFDBEntry 1 }
fdbMulticastStaticFDBMACAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Static FDB. MAC Address."
::= { fdbMulticastStaticFDBEntry 2 }
fdbMulticastStaticFDBEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast Static FDB. egress PortList."
::= { fdbMulticastStaticFDBEntry 3 }
fdbMulticastStaticFDBRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of fdMulticastStaticFDBTable
to which a frame with a specific multicast
address will be flooded in the event that it has not
been learned. To set fdbMulticastStaticFDBEgressPorts,
we have to set the rowstatus as 'NOT_IN_SERVICE' and
set the appropriate portlist in the
fdbMulticastStaticFDBEgressPorts and set the rowstatus as
'ACTIVE' to make the port available."
::= { fdbMulticastStaticFDBEntry 4 }
-- ---------------------------------------------------------------------
-- MAC Address Table Settings
-- ---------------------------------------------------------------------
fdbMACAddrGlobalSettings OBJECT IDENTIFIER ::= { fdbMACAddressTableSettings 1 }
-- ---------------------------------------------------------------------
-- Global Settings
-- ---------------------------------------------------------------------
fdbMACAddrAgingTime OBJECT-TYPE
SYNTAX Integer32(0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC Address Table Settings. Global Settings. Aging Time (0, 10-1000000)"
::= { fdbMACAddrGlobalSettings 1 }
fdbMACAddrAgingDestinationHit OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC Address Table Settings. Global Settings. Aging Destination Hit"
::= { fdbMACAddrGlobalSettings 2 }
-- ---------------------------------------------------------------------
-- MAC Address Learning
-- ---------------------------------------------------------------------
fdbMACAddressLearningTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbMACAddressLearningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast Static FDB ."
::= { fdbMACAddressTableSettings 2 }
fdbMACAddressLearningEntry OBJECT-TYPE
SYNTAX FdbMACAddressLearningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast Static FDB ."
INDEX { fdbMACAddressLearningPort }
::= { fdbMACAddressLearningTable 1 }
FdbMACAddressLearningEntry ::=
SEQUENCE {
fdbMACAddressLearningPort InterfaceIndex,
fdbMACAddressLearningState INTEGER
}
fdbMACAddressLearningPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address Learning. port."
::= { fdbMACAddressLearningEntry 1 }
fdbMACAddressLearningState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC Address Learning. State."
::= { fdbMACAddressLearningEntry 2 }
-- ---------------------------------------------------------------------
-- MAC Address Table
-- ---------------------------------------------------------------------
fdbMACAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbMACAddressTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast Static FDB ."
::= { l2FDBGroup 3 }
fdbMACAddressTableEntry OBJECT-TYPE
SYNTAX FdbMACAddressTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast Static FDB ."
INDEX { fdbMACAddrTabVID, fdbMACAddrTabMACAddr}
::= { fdbMACAddressTable 1 }
FdbMACAddressTableEntry ::=
SEQUENCE {
fdbMACAddrTabVID Integer32,
fdbMACAddrTabMACAddr MacAddress,
fdbMACAddrTabType INTEGER,
fdbMACAddrTabPort DisplayString
}
fdbMACAddrTabVID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address Table. VID (1-4094)."
::= { fdbMACAddressTableEntry 1 }
fdbMACAddrTabMACAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address Table. MAC Address."
::= { fdbMACAddressTableEntry 2 }
fdbMACAddrTabType OBJECT-TYPE
SYNTAX INTEGER {
dynamic (3),
self (4),
static (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address Table. Type."
::= { fdbMACAddressTableEntry 3 }
fdbMACAddrTabPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of dynamicFdbMacAddr has
been seen.If the port is LA port, will show 'po' before port.
"
::= { fdbMACAddressTableEntry 4 }
fdbMACAddressClear OBJECT IDENTIFIER ::= { l2FDBGroup 4 }
fdbClearId OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fdb clear object identification:
If fdbClearAction is clear by port, then this value is a port number;
If fdbClearAction is clear by vlan, then this value is a port vlan id;
If fdbClearAction is clear by MAC, then this value is a MAC address;
otherwise this value is not used."
::= { fdbMACAddressClear 1 }
fdbClearMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fdb clear object identification:
If fdbClearAction is clear by MAC, then this value is a MAC address;
otherwise this value is not used."
::= { fdbMACAddressClear 2 }
fdbClearAction OBJECT-TYPE
SYNTAX INTEGER {
clearAll(1),
clearByVlanId(2),
clearByPort(3),
clearByMAC(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fdb clear action identification:
ClearAll to clear all fdb entries;
ClearClearAllByVlanId clear all fdb entries that belong to specified vlan id;
ClearAllByPort clear all fdb entries that belong to specified port;
ClearAllByMAC clear all fdb entries that belong to specified MAC address"
::= { fdbMACAddressClear 3 }
------------------------------------------------------------------------
-- MAC Notification
------------------------------------------------------------------------
-- fdbMACNotificationSettings OBJECT IDENTIFIER ::= { fdbMACNotification 1 }
-- fdbMACNotificationHistory OBJECT IDENTIFIER ::= { fdbMACNotification 2 }
-- ---------------------------------------------------------------------
-- MAC Notification Settings
-- ---------------------------------------------------------------------
-- fdbMACAddrNotifState OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled (1),
-- disabled (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "MAC Notification Global Settings. state."
-- ::= { fdbMACNotificationSettings 1 }
--
-- fdbMACAddrNotifInterval OBJECT-TYPE
-- SYNTAX Integer32(1..2147483647)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "MAC Notification Global Settings. Interval (1-2147483647)."
-- ::= { fdbMACNotificationSettings 2 }
--
-- fdbMACAddrNotifHistorySize OBJECT-TYPE
-- SYNTAX Integer32(1..500)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "MAC Notification Global Settings. History Size (0-500)."
-- ::= { fdbMACNotificationSettings 3 }
--
-- fdbMACAddrNotifTrapState OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled (1),
-- disabled (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "MAC Notification Global Settings. MAC Notification Trap State."
-- ::= { fdbMACNotificationSettings 4 }
--
--
-- fdbMACNotifTrapTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF FdbMACNotifTrapEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Multicast Static FDB ."
-- ::= { fdbMACNotificationSettings 5 }
--
-- fdbMACNotifTrapEntry OBJECT-TYPE
-- SYNTAX FdbMACNotifTrapEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Multicast Static FDB ."
-- INDEX { fdbMACNotifPort }
-- ::= { fdbMACNotifTrapTable 1 }
--
-- FdbMACNotifTrapEntry ::=
-- SEQUENCE {
-- fdbMACNotifPort InterfaceIndex,
-- fdbMACNotifAddedTrap INTEGER,
-- fdbMACNotifRemovedTrap INTEGER
-- }
-- fdbMACNotifPort OBJECT-TYPE
-- SYNTAX InterfaceIndex
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "MAC Notification Global Settings. port."
-- ::= { fdbMACNotifTrapEntry 1 }
--
-- fdbMACNotifAddedTrap OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled (1),
-- disabled (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "MAC Notification Global Settings. Added Trap."
-- ::= { fdbMACNotifTrapEntry 2 }
--
-- fdbMACNotifRemovedTrap OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled (1),
-- disabled (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "MAC Notification Global Settings. Removed Trap."
-- ::= { fdbMACNotifTrapEntry 3 }
------------------------------------------------------------------------------
--MAC Notification History
------------------------------------------------------------------------------
-- fdbMACNotifiHistoryTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF FdbMACNotifiHistoryEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Multicast Static FDB ."
-- ::= { fdbMACNotificationHistory 1 }
--
-- fdbMACNotifiHistoryEntry OBJECT-TYPE
-- SYNTAX FdbMACNotifiHistoryEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Multicast Static FDB ."
-- INDEX { fdbMACNotifiHistoryID }
-- ::= { fdbMACNotifiHistoryTable 1 }
--
-- FdbMACNotifiHistoryEntry ::=
-- SEQUENCE {
-- fdbMACNotifiHistoryID InterfaceIndex,
-- fdbMACNotifiHistoryMessage DisplayString
-- }
-- fdbMACNotifiHistoryID OBJECT-TYPE
-- SYNTAX InterfaceIndex
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "MAC Notification History . History Index."
-- ::= { fdbMACNotifiHistoryEntry 1 }
--
-- fdbMACNotifiHistoryMessage OBJECT-TYPE
-- SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "MAC Notification History . History Message."
-- ::= { fdbMACNotifiHistoryEntry 2}
--
qosBasPortDefaultCoS OBJECT IDENTIFIER ::= { qosBasicSettingsGroup 1 }
qosBasPortScheMethod OBJECT IDENTIFIER ::= { qosBasicSettingsGroup 2 }
qosBasQueueSettings OBJECT IDENTIFIER ::= { qosBasicSettingsGroup 3 }
qosBasCoS2QueueMapping OBJECT IDENTIFIER ::= { qosBasicSettingsGroup 4 }
qosBasPortRateLimiting OBJECT IDENTIFIER ::= { qosBasicSettingsGroup 5 }
qosBasQueueRateLimiting OBJECT IDENTIFIER ::= { qosBasicSettingsGroup 6 }
qosBasDscpMapCos OBJECT IDENTIFIER ::= { qosBasicSettingsGroup 7 }
-- ------------------------------------------------------------------
-- Port Default CoS
-- ------------------------------------------------------------------
qosPortDefaultCoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPortDefaultCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table of Port Default CoS."
::= { qosBasPortDefaultCoS 1 }
qosPortDefaultCoSEntry OBJECT-TYPE
SYNTAX QosPortDefaultCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry configures the Port Default CoS."
INDEX { qosPortindex }
::= { qosPortDefaultCoSTable 1 }
QosPortDefaultCoSEntry ::= SEQUENCE {
qosPortindex Integer32,
qosPortDefMode INTEGER,
qosPortDefCos Integer32,
qosPortDefOverride INTEGER
}
qosPortindex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { qosPortDefaultCoSEntry 1 }
qosPortDefMode OBJECT-TYPE
SYNTAX INTEGER {
defaultCoS (1),
none (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the mechanism of QoS scheduling on the interface.
"
::= { qosPortDefaultCoSEntry 2 }
qosPortDefCos OBJECT-TYPE
SYNTAX Integer32 ( 0..7 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port Default CoS. Indicates the Default CoS."
::= { qosPortDefaultCoSEntry 3 }
qosPortDefOverride OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Default CoS. Override"
::= { qosPortDefaultCoSEntry 4 }
-- ------------------------------------------------------------------
-- Port Scheduler Method
-- ------------------------------------------------------------------
qosPortSchedulerMethodTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPortSchedulerMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of scheduling mechanism configurations
for ports."
::= { qosBasPortScheMethod 1 }
qosPortSchedulerMethodEntry OBJECT-TYPE
SYNTAX QosPortSchedulerMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry configures the scheduling mode on an interface."
INDEX { qosSchedulingModeBasePort }
::= { qosPortSchedulerMethodTable 1 }
QosPortSchedulerMethodEntry ::= SEQUENCE {
qosSchedulingModeBasePort Integer32,
qosSchedulingMode INTEGER
}
qosSchedulingModeBasePort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { qosPortSchedulerMethodEntry 1 }
qosSchedulingMode OBJECT-TYPE
SYNTAX INTEGER {
sp(1),
rr(2),
wrr(3),
wdrr(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the mechanism of QoS scheduling on the interface.
"
::= { qosPortSchedulerMethodEntry 2 }
-- ------------------------------------------------------------------
-- Queue Settings
-- ------------------------------------------------------------------
qosQueueSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosQueueSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of configurations for WRR queue bandwidth
of queues.
"
::= { qosBasQueueSettings 1 }
qosQueueSettingsEntry OBJECT-TYPE
SYNTAX QosQueueSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defines WRR weight of a queue on an interface.
An entry exists for each queue if the WRR bandwidth is configurable
on the queue.
"
INDEX {
qosQueueBasePort,
qosQueueID
}
::= { qosQueueSettingsTable 1 }
QosQueueSettingsEntry ::= SEQUENCE {
qosQueueBasePort Integer32,
qosQueueID INTEGER,
qosQueueWrrWeight INTEGER,
qosQueueQuantum INTEGER
}
qosQueueBasePort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { qosQueueSettingsEntry 1 }
qosQueueID OBJECT-TYPE
SYNTAX INTEGER ( 0..7 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the queue ID of the entry."
::= { qosQueueSettingsEntry 2 }
qosQueueWrrWeight OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the WRR Weight."
::= { qosQueueSettingsEntry 3 }
qosQueueQuantum OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the WDRR Quantum."
::= { qosQueueSettingsEntry 4 }
-- ------------------------------------------------------------------
-- CoS to Queue Mapping
-- ------------------------------------------------------------------
qosCoS2QueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosCoS2QueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CoS to Queue Mapping."
::= { qosBasCoS2QueueMapping 1 }
qosCoS2QueueEntry OBJECT-TYPE
SYNTAX QosCoS2QueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of CoS to Queue Mapping entry."
INDEX { qosCoS2QueCos }
::= { qosCoS2QueueTable 1 }
QosCoS2QueueEntry ::= SEQUENCE {
qosCoS2QueCos Integer32,
qosCos2QueQueueID Integer32
}
qosCoS2QueCos OBJECT-TYPE
SYNTAX Integer32 ( 0..7 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoS to Queue Mapping. CoS."
::= { qosCoS2QueueEntry 1 }
qosCos2QueQueueID OBJECT-TYPE
SYNTAX Integer32 ( 0..7 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoS to Queue Mapping. Queue ID."
::= { qosCoS2QueueEntry 2 }
-- ------------------------------------------------------------------
-- Port Rate Limiting
-- ------------------------------------------------------------------
qosPortRateLimitingTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPortRateLimitingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of Port Rate Limiting."
::= { qosBasPortRateLimiting 1 }
qosPortRateLimitingEntry OBJECT-TYPE
SYNTAX QosPortRateLimitingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry configures the Port Rate Limiting."
INDEX { qosBandwidthBasePort }
::= { qosPortRateLimitingTable 1 }
QosPortRateLimitingEntry ::= SEQUENCE {
qosBandwidthBasePort Integer32,
qosBandwidthRxRate Integer32,
qosBandwidthRxRateMode INTEGER,
qosBandwidthRxBurst Integer32,
qosBandwidthTxRate Integer32,
qosBandwidthTxRateMode INTEGER,
qosBandwidthTxBurst Integer32
}
qosBandwidthBasePort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { qosPortRateLimitingEntry 1 }
qosBandwidthRxRate OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. if
qosBandwidthRxRateMode is rate, range is 64 ~ 10000000 and
qosBandwidthRxRateMode is percent, range is 1 ~ 100."
::= { qosPortRateLimitingEntry 2 }
qosBandwidthRxRateMode OBJECT-TYPE
SYNTAX INTEGER {
rate(1),
percent(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Minimum Rate Mode.
It will indicate the field:qosBandwidthRxRate attribute.
rate: means the Minimum Rate.
percent: means the percentage."
::= { qosPortRateLimitingEntry 3 }
qosBandwidthRxBurst OBJECT-TYPE
SYNTAX Integer32(0..128000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the burst size of the port
will be applied. This value can also be affected by the metering."
::= { qosPortRateLimitingEntry 4 }
qosBandwidthTxRate OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. if
qosBandwidthTxRateMode is rate, range is 64 ~ 10000000 and
qosBandwidthTxRateMode is percent, range is 1 ~ 100."
::= { qosPortRateLimitingEntry 5 }
qosBandwidthTxRateMode OBJECT-TYPE
SYNTAX INTEGER {
rate(1),
percent(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Minimum Rate Mode.
It will indicate the field:qosBandwidthTxRate attribute.
rate: means the Minimum Rate.
percent: means the percentage."
::= { qosPortRateLimitingEntry 6 }
qosBandwidthTxBurst OBJECT-TYPE
SYNTAX Integer32 (0..128000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the burst size of the port
will be applied. This value can also be affected by the metering."
::= { qosPortRateLimitingEntry 7 }
-- ------------------------------------------------------------------
-- Queue Rate Limiting
-- ------------------------------------------------------------------
qosQueueRateLimitingTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosQueueRateLimitingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains information about Queue Rate Limiting."
::= { qosBasQueueRateLimiting 1 }
qosQueueRateLimitingEntry OBJECT-TYPE
SYNTAX QosQueueRateLimitingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains bandwidth control information of Queue Rate Limiting."
INDEX {
qosQueueBandwidthBasePort,
qosQueueBandwidthQueId
}
::= { qosQueueRateLimitingTable 1 }
QosQueueRateLimitingEntry ::= SEQUENCE {
qosQueueBandwidthBasePort Integer32,
qosQueueBandwidthQueId Unsigned32,
qosQueueBandwidthMinRate Integer32,
qosQueueBandwidthMaxRate Integer32,
qosQueueBandwidthRateMode INTEGER
}
qosQueueBandwidthBasePort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { qosQueueRateLimitingEntry 1 }
qosQueueBandwidthQueId OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the queue ID of the entry."
::= { qosQueueRateLimitingEntry 2 }
qosQueueBandwidthMinRate OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the minimum rate of the specified port and queue.
It is based on the dQosQueueBandwidthMinRateMode field and
if the dQosQueueBandwidthMinRateMode selected as:
rate: means egress Minimum Rate (units:kbps),range are 64 ~ 10000000.
percent: means the percentage and the effective rangs are 1 ~ 100.
0 means disabled rate limit."
::= { qosQueueRateLimitingEntry 3 }
qosQueueBandwidthMaxRate OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum rate of the specified port and queue.
It is based on the dQosQueueBandwidthMaxRateMode field and
if the dQosQueueBandwidthMaxRateMode selected as:
rate: means egress Maximum Rate (units:kbps),range are 64 ~ 10000000.
percent: means the percentage and the effective rangs are 1 ~ 100.
0 means disabled rate limit."
::= { qosQueueRateLimitingEntry 4 }
qosQueueBandwidthRateMode OBJECT-TYPE
SYNTAX INTEGER {
rate(1),
percent(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Minimum Rate Mode.
It will indicate the field:dQosQueueBandwidthMinRate attribute.
rate: means the Minimum Rate.
percent: means the percentage."
::= { qosQueueRateLimitingEntry 5 }
-- ------------------------------------------------------------------
-- DSCP mapping CoS
-- ------------------------------------------------------------------
qosDscpMapCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosDscpMapCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table of Port Default CoS."
::= { qosBasDscpMapCos 1 }
qosDscpMapCosEntry OBJECT-TYPE
SYNTAX QosDscpMapCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry configures the Port Default CoS."
INDEX { qosPortIndex }
::= { qosDscpMapCosTable 1 }
QosDscpMapCosEntry ::= SEQUENCE {
qosPortIndex Integer32,
qosTrustMode INTEGER
}
qosPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { qosDscpMapCosEntry 1 }
qosTrustMode OBJECT-TYPE
SYNTAX INTEGER {
cos (0),
dscp (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The QoS port trust mode.
"
::= { qosDscpMapCosEntry 2 }
qosDscpValueMapCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosDscpValueMapCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table of Port Default CoS."
::= { qosBasDscpMapCos 2 }
qosDscpValueMapCosEntry OBJECT-TYPE
SYNTAX QosDscpValueMapCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry configures the Port Default CoS."
INDEX {
qosDscpPort,
qosDscpCos
}
::= { qosDscpValueMapCosTable 1 }
QosDscpValueMapCosEntry ::= SEQUENCE {
qosDscpPort Integer32,
qosDscpCos Integer32,
qosDscpMapCosList PortList
}
qosDscpPort OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSCP port index.
"
::= { qosDscpValueMapCosEntry 1 }
qosDscpCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CoS value.
"
::= { qosDscpValueMapCosEntry 2 }
qosDscpMapCosList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value list mapping to CoS.
"
::= { qosDscpValueMapCosEntry 3 }
-- ---------------------------------------------------------------------
-- IGMP Snooping Function
-- ---------------------------------------------------------------------
igsSystem OBJECT IDENTIFIER ::= { l2MulticastCtrlGroup 1 }
igsVlan OBJECT IDENTIFIER ::= { l2MulticastCtrlGroup 2 }
igsStats OBJECT IDENTIFIER ::= { l2MulticastCtrlGroup 3 }
igsStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP snooping in the system.
When set to 'enabled', the IGS module starts
protocol operations.
When set to 'disabled', the IGS module stops performing
protocol operations."
DEFVAL { disabled }
::= { igsSystem 1 }
-- igsClearIgmpSnoopByPortIf OBJECT-TYPE
-- SYNTAX InterfaceIndexOrZero
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates the ifIndex of the port/port-channel on which
-- the IGMP snooping counters will be cleared.
-- When read, the special value 0 is returned."
-- DEFVAL { 0 }
-- ::= { igsSystem 2 }
igsClearIgmpSnoopByVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the VLAN ID on which the IGMP snooping
counters will be cleared.
When read, the special value 0 is returned."
DEFVAL { 0 }
::= { igsSystem 3 }
-- VLAN based filter table
igsVlanFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system."
::= { igsVlan 1 }
igsVlanFilterEntry OBJECT-TYPE
SYNTAX IgsVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping status , version and fast leave
configuration for a specific VLAN."
INDEX { igsVlanFilterVlanId }
::= { igsVlanFilterTable 1 }
IgsVlanFilterEntry ::= SEQUENCE {
igsVlanFilterVlanId Integer32,
igsVlanSnoopStatus INTEGER,
-- igsVlanMinimumVersion INTEGER,
igsVlanFastLeave INTEGER,
-- igsVlanReportSuppression INTEGER,
-- igsVlanSuppressionTime Integer32,
igsVlanQuerier INTEGER,
igsVlanCfgQuerier INTEGER,
igsVlanQuerierVersion INTEGER,
igsVlanQueryInterval Integer32,
igsVlanMaxResponseTime Integer32,
igsVlanRobustnessValue Integer32,
igsVlanLastMemberQueryInterval Integer32
-- igsVlanProxyReporting INTEGER,
-- igsVlanProxyReportingSourceAddress InetAddress
-- igsVlanRateLimitAction INTEGER,
-- igsVlanRateLimit INTEGER
}
igsVlanFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in IgsVlanFilterEntry is to be done."
::= { igsVlanFilterEntry 1 }
igsVlanSnoopStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to enable/disable IGS function on a specific VLAN."
DEFVAL { disabled }
::= { igsVlanFilterEntry 2 }
-- igsVlanMinimumVersion OBJECT-TYPE
-- SYNTAX INTEGER {
-- v1(1),
-- v2(2),
-- v3(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "To restrict the minimum version allows user to control the minimum
-- version of MGMD hosts can be joined on a layer 2 port. The value
-- '1' means that this interface does not restrict the minimum version.
-- Value 2 applies to IGMP routers only. Value 3 applies to IGMP and
-- MLD routers.
-- "
-- ::= { igsVlanFilterEntry 3 }
igsVlanFastLeave OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table."
DEFVAL { disabled }
::= { igsVlanFilterEntry 4 }
-- igsVlanReportSuppression OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object enable/disable the report suppression on the interface.
-- The report suppression function only works for IGMPv1
-- and IGMPv2 traffic. When report suppression is enabled, the
-- Switch suppresses the duplicate reports sent by hosts. The
-- suppression for the same group report or leave will continue
-- until the suppression time expired. For report or leave messages
-- to the same group, only one report or leave message is forwarded.
-- The remaining report and leave messages are suppressed."
-- DEFVAL { disabled }
-- ::= { igsVlanFilterEntry 5 }
-- igsVlanSuppressionTime OBJECT-TYPE
-- SYNTAX Integer32 (1..300)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The interval of report suppression on this interface.Unit is second."
-- DEFVAL { 12 }
-- ::= { igsVlanFilterEntry 6 }
igsVlanQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is configured as a querier in the VLAN"
DEFVAL { disabled }
::= { igsVlanFilterEntry 7 }
igsVlanCfgQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured as a querier via this object
to send out IGMP general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries."
DEFVAL { disabled }
::= { igsVlanFilterEntry 8 }
igsVlanQuerierVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(1),
v2(2),
v3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to set igmp version function on a specific VLAN."
::= { igsVlanFilterEntry 9 }
igsVlanQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in the network."
DEFVAL { 125 }
::= { igsVlanFilterEntry 10 }
igsVlanMaxResponseTime OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time advertised General
queries on this interface."
DEFVAL { 10 }
::= { igsVlanFilterEntry 11}
igsVlanRobustnessValue OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number for a specific VLAN
queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'RobustnessValue',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group."
DEFVAL { 2 }
::= { igsVlanFilterEntry 12 }
igsVlanLastMemberQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
DEFVAL { 1 }
::= { igsVlanFilterEntry 13 }
-- igsVlanProxyReporting OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object enables the proxy-reporting function on the interface.
-- When the function proxy reporting is enabled, the received multiple
-- IGMP report or leave packets for a specific (S, G) will be integrated
-- into one report before being sent to the router port. Proxy reporting
-- source IP will be used as source IP of the report, Zero IP address will
-- be used when the proxy reporting source IP is not set."
-- DEFVAL { disabled }
-- ::= { igsVlanFilterEntry 14 }
-- igsVlanProxyReportingSourceAddress OBJECT-TYPE
-- SYNTAX InetAddress (SIZE (16))
-- MAX-ACCESS read-write
-- STATUS deprecated
-- DESCRIPTION
-- "This object indicates the source Internet address
-- of proxy reporting. This object is valid when
-- igsVlanProxyReporting is 'enabled'"
-- ::= { igsVlanFilterEntry 15 }
-- igsVlanRateLimitAction OBJECT-TYPE
-- SYNTAX INTEGER {
-- noLimit(1),
-- rateLimit(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies the action to be taken on the packet if the filter
-- rule matches."
-- DEFVAL { noLimit }
-- ::= { igsVlanFilterEntry 16 }
--
-- igsVlanRateLimit OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies the rate limit value.
-- The aclL3v6RuleAction should be specified as rate-limit."
-- DEFVAL { -1 }
-- ::= { igsVlanFilterEntry 17 }
-- VLAN Based IGMP Snooping Group
igsVlanMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MAC based multicast forwarding
information."
::= { igsVlan 2 }
igsVlanMulticastGroupEntry OBJECT-TYPE
SYNTAX IgsVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded."
INDEX { igsVlanMulticastGroupVlanId,
igsVlanMulticastGroupIpAddress,
igsVlanMulticastGroupReceiverPortIndex,
igsVlanMulticastGroupReceiverSrcAddr}
::= { igsVlanMulticastGroupTable 1 }
IgsVlanMulticastGroupEntry ::= SEQUENCE {
igsVlanMulticastGroupVlanId Integer32,
igsVlanMulticastGroupIpAddress IpAddress,
igsVlanMulticastGroupReceiverPortIndex InterfaceIndex,
igsVlanMulticastGroupReceiverSrcAddr IpAddress,
igsVlanMulticastGroupMacAddress MacAddress,
--igsVlanMulticastGroupFM INTEGER,
igsVlanMulticastGroupExp TimeTicks,
igsVlanMulticastGroupPortList PortList
}
igsVlanMulticastGroupVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { igsVlanMulticastGroupEntry 1 }
igsVlanMulticastGroupIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format."
::= { igsVlanMulticastGroupEntry 2 }
igsVlanMulticastGroupReceiverPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface on which the multicast group address is learnt."
::= { igsVlanMulticastGroupEntry 3 }
igsVlanMulticastGroupReceiverSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the multicast receiver that has sent
the multicast report to join this group."
::= { igsVlanMulticastGroupEntry 4 }
igsVlanMulticastGroupMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format."
::= { igsVlanMulticastGroupEntry 5 }
-- igsVlanMulticastGroupFM OBJECT-TYPE
-- SYNTAX INTEGER {
-- in(1),
-- ex(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { igsVlanMulticastGroupEntry 6 }
igsVlanMulticastGroupExp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsVlanMulticastGroupEntry 7 }
igsVlanMulticastGroupPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this group will be forwarded."
::= { igsVlanMulticastGroupEntry 8 }
-- VLAN Based Static Multicast Forwarding Table
igsVlanStaticMcastGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanStaticMcastGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains IP based multicast forwarding
information."
::= { igsVlan 3 }
igsVlanStaticMcastGrpEntry OBJECT-TYPE
SYNTAX IgsVlanStaticMcastGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded."
INDEX {
igsVlanStaticMcastGrpVlanId,
igsVlanStaticMcastGrpGroupAddress
}
::= { igsVlanStaticMcastGrpTable 1 }
IgsVlanStaticMcastGrpEntry ::= SEQUENCE {
igsVlanStaticMcastGrpVlanId Integer32,
igsVlanStaticMcastGrpGroupAddress InetAddress,
igsVlanStaticMcastGrpPortList PortList,
igsVlanStaticMcastGrpRowStatus RowStatus
}
igsVlanStaticMcastGrpVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { igsVlanStaticMcastGrpEntry 1 }
igsVlanStaticMcastGrpGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP/IPv6 multicast group address"
::= { igsVlanStaticMcastGrpEntry 2 }
igsVlanStaticMcastGrpPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this source and group will be forwarded."
::= { igsVlanStaticMcastGrpEntry 3 }
igsVlanStaticMcastGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { igsVlanStaticMcastGrpEntry 4 }
-- VLAN based router table.
igsVlanRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of ports through which
a router, in a particular VLAN is reachable."
::= { igsVlan 4 }
igsVlanRouterEntry OBJECT-TYPE
SYNTAX IgsVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the VLAN ID and list of ports on which
routers are present in the VLAN."
INDEX { igsVlanRouterVlanId }
::= { igsVlanRouterTable 1 }
IgsVlanRouterEntry ::= SEQUENCE {
igsVlanRouterVlanId Integer32,
igsVlanRouterStaticPortList PortList,
igsVlanRouterBlockPortList PortList,
igsVlanRouterDynamicPortList PortList
}
igsVlanRouterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the ports through which router is reachable."
::= { igsVlanRouterEntry 1 }
igsVlanRouterStaticPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of static ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically."
::= { igsVlanRouterEntry 2 }
igsVlanRouterBlockPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as blocked router
ports statically. "
::= { igsVlanRouterEntry 3 }
igsVlanRouterDynamicPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of dynamic ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically."
::= { igsVlanRouterEntry 4 }
-- Snooping Statistics
igsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains snooping statistics
maintained by the switch. The statistics are
maintained on a per VLAN basis."
::= { igsStats 1 }
igsStatsEntry OBJECT-TYPE
SYNTAX IgsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping statistics for a particular VLAN."
INDEX { igsStatsVlanId }
::= { igsStatsTable 1 }
IgsStatsEntry ::= SEQUENCE {
igsStatsVlanId Integer32,
igsStatsIGMPv1RxReport Counter32,
igsStatsIGMPv1RxQueries Counter32,
igsStatsIGMPv1TxReport Counter32,
igsStatsIGMPv1TxQueries Counter32,
igsStatsIGMPv2RxReport Counter32,
igsStatsIGMPv2RxQueries Counter32,
igsStatsIGMPv2RxLeave Counter32,
igsStatsIGMPv2TxReport Counter32,
igsStatsIGMPv2TxQueries Counter32,
igsStatsIGMPv2TxLeave Counter32,
igsStatsIGMPv3RxReport Counter32,
igsStatsIGMPv3RxQueries Counter32,
igsStatsIGMPv3TxReport Counter32,
igsStatsIGMPv3TxQueries Counter32
}
igsStatsVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" VLAN ID for which snooping statistics are displayed"
::= { igsStatsEntry 1 }
igsStatsIGMPv1RxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 2 }
igsStatsIGMPv1RxQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 3 }
igsStatsIGMPv1TxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 4 }
igsStatsIGMPv1TxQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 5 }
igsStatsIGMPv2RxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 6 }
igsStatsIGMPv2RxQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 7 }
igsStatsIGMPv2RxLeave OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 8 }
igsStatsIGMPv2TxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 9 }
igsStatsIGMPv2TxQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 10 }
igsStatsIGMPv2TxLeave OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 11 }
igsStatsIGMPv3RxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 12 }
igsStatsIGMPv3RxQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 13 }
igsStatsIGMPv3TxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 14 }
igsStatsIGMPv3TxQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { igsStatsEntry 15 }
-- ---------------------------------------------------------------------
-- MLD Snooping Function
-- ---------------------------------------------------------------------
-- ---------------------------------------------------------------------
-- IGMP Snooping Function
-- ---------------------------------------------------------------------
mldSystem OBJECT IDENTIFIER ::= { l2MulticastCtrlGroup 4 }
mldVlan OBJECT IDENTIFIER ::= { l2MulticastCtrlGroup 5 }
mldStats OBJECT IDENTIFIER ::= { l2MulticastCtrlGroup 6 }
mldStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP snooping in the system.
When set to 'enabled', the IGS module starts
protocol operations.
When set to 'disabled', the IGS module stops performing
protocol operations."
DEFVAL { disabled }
::= { mldSystem 1 }
-- mldClearIgmpSnoopByPortIf OBJECT-TYPE
-- SYNTAX InterfaceIndexOrZero
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates the ifIndex of the port/port-channel on which
-- the IGMP snooping counters will be cleared.
-- When read, the special value 0 is returned."
-- DEFVAL { 0 }
-- ::= { mldSystem 2 }
mldClearIgmpSnoopByVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the VLAN ID on which the IGMP snooping
counters will be cleared.
When read, the special value 0 is returned."
DEFVAL { 0 }
::= { mldSystem 3 }
-- VLAN based filter table
mldVlanFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system."
::= { mldVlan 1 }
mldVlanFilterEntry OBJECT-TYPE
SYNTAX MldVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping status , version and fast leave
configuration for a specific VLAN."
INDEX { mldVlanFilterVlanId }
::= { mldVlanFilterTable 1 }
MldVlanFilterEntry ::= SEQUENCE {
mldVlanFilterVlanId Integer32,
mldVlanSnoopStatus INTEGER,
-- mldVlanMinimumVersion INTEGER,
mldVlanFastLeave INTEGER,
-- mldVlanReportSuppression INTEGER,
-- mldVlanSuppressionTime Integer32,
mldVlanQuerier INTEGER,
mldVlanCfgQuerier INTEGER,
mldVlanQuerierVersion INTEGER,
mldVlanQueryInterval Integer32,
mldVlanMaxResponseTime Integer32,
mldVlanRobustnessValue Integer32,
mldVlanLastListenerQueryInterval Integer32
-- mldVlanProxyReporting INTEGER,
-- mldVlanProxyReportingSourceAddress InetAddress
-- mldVlanMrouterPortLearning INTEGER,
-- mldVlanRateLimitAction INTEGER,
-- mldVlanRateLimit INTEGER
}
mldVlanFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of MldVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in MldVlanFilterEntry is to be done."
::= { mldVlanFilterEntry 1 }
mldVlanSnoopStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to enable/disable IGS function on a specific VLAN."
DEFVAL { disabled }
::= { mldVlanFilterEntry 2 }
-- mldVlanMinimumVersion OBJECT-TYPE
-- SYNTAX INTEGER {
-- v1(1),
-- v2(2),
-- v3(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { mldVlanFilterEntry 3 }
mldVlanFastLeave OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table."
DEFVAL { disabled }
::= { mldVlanFilterEntry 4 }
-- mldVlanReportSuppression OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- DEFVAL { disabled }
-- ::= { mldVlanFilterEntry 5 }
-- mldVlanSuppressionTime OBJECT-TYPE
-- SYNTAX Integer32 (1..300)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- DEFVAL { 12 }
-- ::= { mldVlanFilterEntry 6 }
mldVlanQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is configured as a querier in the VLAN"
DEFVAL { disabled }
::= { mldVlanFilterEntry 7 }
mldVlanCfgQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured as a querier via this object
to send out IGMP general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries."
DEFVAL { disabled }
::= { mldVlanFilterEntry 8 }
mldVlanQuerierVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(1),
v2(2),
v3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to set igmp version function on a specific VLAN."
::= { mldVlanFilterEntry 9 }
mldVlanQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in the network."
DEFVAL { 125 }
::= { mldVlanFilterEntry 10 }
mldVlanMaxResponseTime OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time advertised General
queries on this interface."
DEFVAL { 10 }
::= { mldVlanFilterEntry 11}
mldVlanRobustnessValue OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number for a specific VLAN
queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'RobustnessValue',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group."
DEFVAL { 2 }
::= { mldVlanFilterEntry 12 }
mldVlanLastListenerQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
DEFVAL { 1 }
::= { mldVlanFilterEntry 13 }
-- mldVlanProxyReporting OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- DEFVAL { disabled }
-- ::= { mldVlanFilterEntry 14 }
-- mldVlanProxyReportingSourceAddress OBJECT-TYPE
-- SYNTAX InetAddress (SIZE (16))
-- MAX-ACCESS read-write
-- STATUS deprecated
-- DESCRIPTION
-- ""
-- ::= { mldVlanFilterEntry 15 }
-- mldVlanMrouterPortLearning OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- DEFVAL { disabled }
-- ::= { mldVlanFilterEntry 16 }
-- mldVlanRateLimitAction OBJECT-TYPE
-- SYNTAX INTEGER {
-- noLimit(1),
-- rateLimit(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies the action to be taken on the packet if the filter
-- rule matches."
-- DEFVAL { noLimit }
-- ::= { mldVlanFilterEntry 17 }
-- mldVlanRateLimit OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies the rate limit value.
-- The aclL3v6RuleAction should be specified as rate-limit."
-- DEFVAL { -1 }
-- ::= { mldVlanFilterEntry 18 }
-- VLAN Based IGMP Snooping Group
mldVlanMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MAC based multicast forwarding
information."
::= { mldVlan 2 }
mldVlanMulticastGroupEntry OBJECT-TYPE
SYNTAX MldVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded."
INDEX { mldVlanMulticastGroupVlanId,
mldVlanMulticastGroupIpAddress,
mldVlanMulticastGroupReceiverPortIndex,
mldVlanMulticastGroupReceiverSrcAddr}
::= { mldVlanMulticastGroupTable 1 }
MldVlanMulticastGroupEntry ::= SEQUENCE {
mldVlanMulticastGroupVlanId Integer32,
mldVlanMulticastGroupIpAddress Ipv6Address,
mldVlanMulticastGroupReceiverPortIndex InterfaceIndex,
mldVlanMulticastGroupReceiverSrcAddr Ipv6Address,
mldVlanMulticastGroupMacAddress MacAddress,
--mldVlanMulticastGroupFM INTEGER,
mldVlanMulticastGroupExp TimeTicks,
mldVlanMulticastGroupPortList PortList
}
mldVlanMulticastGroupVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { mldVlanMulticastGroupEntry 1 }
mldVlanMulticastGroupIpAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format."
::= { mldVlanMulticastGroupEntry 2 }
mldVlanMulticastGroupReceiverPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface on which the multicast group address is learnt."
::= { mldVlanMulticastGroupEntry 3 }
mldVlanMulticastGroupReceiverSrcAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the multicast receiver that has sent
the multicast report to join this group."
::= { mldVlanMulticastGroupEntry 4 }
mldVlanMulticastGroupMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format."
::= { mldVlanMulticastGroupEntry 5 }
-- mldVlanMulticastGroupFM OBJECT-TYPE
-- SYNTAX INTEGER {
-- ex(1),
-- in(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { mldVlanMulticastGroupEntry 6 }
mldVlanMulticastGroupExp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { mldVlanMulticastGroupEntry 7 }
mldVlanMulticastGroupPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this group will be forwarded."
::= { mldVlanMulticastGroupEntry 8 }
-- VLAN Based Static Multicast Forwarding Table
mldVlanStaticMcastGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldVlanStaticMcastGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains IP based multicast forwarding
information."
::= { mldVlan 3 }
mldVlanStaticMcastGrpEntry OBJECT-TYPE
SYNTAX MldVlanStaticMcastGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded."
INDEX {
mldVlanStaticMcastGrpVlanId,
mldVlanStaticMcastGrpGroupAddress
}
::= { mldVlanStaticMcastGrpTable 1 }
MldVlanStaticMcastGrpEntry ::= SEQUENCE {
mldVlanStaticMcastGrpVlanId Integer32,
mldVlanStaticMcastGrpGroupAddress InetAddress,
mldVlanStaticMcastGrpPortList PortList,
mldVlanStaticMcastGrpRowStatus RowStatus
}
mldVlanStaticMcastGrpVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { mldVlanStaticMcastGrpEntry 1 }
mldVlanStaticMcastGrpGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP/IPv6 multicast group address"
::= { mldVlanStaticMcastGrpEntry 2 }
mldVlanStaticMcastGrpPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this source and group will be forwarded."
::= { mldVlanStaticMcastGrpEntry 3 }
mldVlanStaticMcastGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { mldVlanStaticMcastGrpEntry 4 }
-- VLAN based router table.
mldVlanRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of ports through which
a router, in a particular VLAN is reachable."
::= { mldVlan 4 }
mldVlanRouterEntry OBJECT-TYPE
SYNTAX MldVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the VLAN ID and list of ports on which
routers are present in the VLAN."
INDEX { mldVlanRouterVlanId }
::= { mldVlanRouterTable 1 }
MldVlanRouterEntry ::= SEQUENCE {
mldVlanRouterVlanId Integer32,
mldVlanRouterStaticPortList PortList,
mldVlanRouterBlockPortList PortList,
mldVlanRouterDynamicPortList PortList
}
mldVlanRouterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the ports through which router is reachable."
::= { mldVlanRouterEntry 1 }
mldVlanRouterStaticPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of static ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically."
::= { mldVlanRouterEntry 2 }
mldVlanRouterBlockPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as blocked router
ports statically. "
::= { mldVlanRouterEntry 3 }
mldVlanRouterDynamicPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of dynamic ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically."
::= { mldVlanRouterEntry 4 }
-- Snooping Statistics
mldStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains snooping statistics
maintained by the switch. The statistics are
maintained on a per VLAN basis."
::= { mldStats 1 }
mldStatsEntry OBJECT-TYPE
SYNTAX MldStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping statistics for a particular VLAN."
INDEX { mldStatsVlanId }
::= { mldStatsTable 1 }
MldStatsEntry ::= SEQUENCE {
mldStatsVlanId Integer32,
mldStatsMLDv1RxReport Counter32,
mldStatsMLDv1RxDone Counter32,
mldStatsMLDv1TxReport Counter32,
mldStatsMLDv1TxDone Counter32,
mldStatsMLDv2RxReport Counter32,
mldStatsMLDv2TxReport Counter32,
mldStatsRxQueries Counter32,
mldStatsTxQueries Counter32
}
mldStatsVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" VLAN ID for which snooping statistics are displayed"
::= { mldStatsEntry 1 }
mldStatsMLDv1RxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { mldStatsEntry 2 }
mldStatsMLDv1RxDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { mldStatsEntry 3 }
mldStatsMLDv1TxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { mldStatsEntry 4 }
mldStatsMLDv1TxDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { mldStatsEntry 5 }
mldStatsMLDv2RxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { mldStatsEntry 6 }
mldStatsMLDv2TxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { mldStatsEntry 7 }
mldStatsRxQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { mldStatsEntry 8 }
mldStatsTxQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { mldStatsEntry 9 }
-- ----------------------------------------------------------
-- Multicast Filter VLAN Table
-- ----------------------------------------------------------
multicastFilterVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastFilterVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control multicast filtering modes."
::= { l2MulticastCtrlGroup 7 }
multicastFilterVlanEntry OBJECT-TYPE
SYNTAX MulticastFilterVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the mcastFiltertem.
Index to the table is the interface index of the VLAN."
INDEX { multicastFilterVlanIndex }
::= { multicastFilterVlanTable 1 }
MulticastFilterVlanEntry ::=
SEQUENCE {
multicastFilterVlanIndex
Integer32,
multicastFilterVlanType
INTEGER
}
multicastFilterVlanIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN index of the VLAN for which the configuration
in this entry applies."
::= { multicastFilterVlanEntry 1 }
multicastFilterVlanType OBJECT-TYPE
SYNTAX INTEGER {
forward (0),
filter (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the multicast filtering modes as below :
forward -Forwards all unregistered groups.
filter -Filters all unregistered groups."
::= { multicastFilterVlanEntry 2 }
deviceInformation OBJECT IDENTIFIER ::= { deviceInfoGroup 1 }
deviceFunction OBJECT IDENTIFIER ::= { deviceInfoGroup 2 }
deviceErrorCodeInformation OBJECT IDENTIFIER ::= { deviceInfoGroup 3 }
deviceFan OBJECT IDENTIFIER ::= { deviceInfoGroup 4 }
-- ---------------------------------------------------------------------
-- Device Information
-- ---------------------------------------------------------------------
deviceInfoDeviceType OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Information. Device Type "
::= { deviceInformation 1}
deviceInfoBootPROMVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Information. Boot PROM Version"
::= { deviceInformation 2}
deviceInfoFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Information. Firmware Version"
::= { deviceInformation 3}
deviceInfoHardwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Information. Hardware Version"
::= { deviceInformation 4}
deviceInfoMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Information. MAC Address"
::= { deviceInformation 5}
deviceInfoSystemTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Information. System Time"
::= { deviceInformation 6}
deviceInfoSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Information. Serial Number"
::= { deviceInformation 7}
deviceSwitchCPULast5SecUsage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the average CPU usage in last 5 second of the switch in percentage"
::= { deviceInformation 8}
-- ---------------------------------------------------------------------
-- Firmware Information
-- ---------------------------------------------------------------------
firmwareInformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF FirmwareInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Firmware Information."
::= { deviceFunction 1 }
firmwareInformationEntry OBJECT-TYPE
SYNTAX FirmwareInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list ofFirmware Information entry."
INDEX { firmwareInfoImageID }
::= { firmwareInformationTable 1 }
FirmwareInformationEntry ::= SEQUENCE {
firmwareInfoImageID Integer32,
firmwareInfoVersion DisplayString,
firmwareInfoSizeB Unsigned32,
firmwareInfoUpdateTime DisplayString
}
firmwareInfoImageID OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware Information. Image ID."
::= { firmwareInformationEntry 1 }
firmwareInfoVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware Information. Version."
::= { firmwareInformationEntry 2}
firmwareInfoSizeB OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware Information. Size B."
::= { firmwareInformationEntry 3 }
firmwareInfoUpdateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware Information. Update Time."
::= { firmwareInformationEntry 4}
-- ---------------------------------------------------------------------
-- Function bar tools
-- ---------------------------------------------------------------------
devFunFwUpgradeAndBackup OBJECT IDENTIFIER ::= { deviceFunction 2 }
devFunConfigInfo OBJECT IDENTIFIER ::= { deviceFunction 3 }
devFunConfiguration OBJECT IDENTIFIER ::= { deviceFunction 4 }
devFunLogBackup OBJECT IDENTIFIER ::= { deviceFunction 5 }
devFunPing OBJECT IDENTIFIER ::= { deviceFunction 6 }
devFunLangMgmt OBJECT IDENTIFIER ::= { deviceFunction 7 }
-- ---------------------------------------------------------------------
-- Function bar Firmware Upgrade From Http
-- ---------------------------------------------------------------------
devFunFwServerIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Address type of IP Address of the remote system to which the switch file have to be transfer."
::= { devFunFwUpgradeAndBackup 1 }
devFunFwServerIpvxAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address of the remote system to which the switch file have to be transfer."
::= { devFunFwUpgradeAndBackup 2 }
devFunFwServerInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface name when the cmFwServerIpvxAddr is linklocal address."
::= { devFunFwUpgradeAndBackup 3 }
devFunFwSrcFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure firmware filename to download or upload."
::= { devFunFwUpgradeAndBackup 4 }
devFunFwOperation OBJECT-TYPE
SYNTAX INTEGER {
none(0),
download(1),
upload(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operates to perform download or upload file to the unit.
This object is used in conjunction with Ip and FileName."
::= { devFunFwUpgradeAndBackup 5 }
devFunFwOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
failure(2),
progressing(3),
transmit(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current operation status of file upload or download."
::= { devFunFwUpgradeAndBackup 6 }
devFunFwTransferPercentage OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The file transfer percentage of the file upload or download."
::= { devFunFwUpgradeAndBackup 7 }
devFunFwRetryCount OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of retry when upgrade fail."
::= { devFunFwUpgradeAndBackup 8 }
devFunFwServerStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
internalerror(1),
nofileerror(2),
accessViolation(3),
memoryfull(4),
fileexists(5),
connecthostfail(6),
invalidarg(7),
readfail(8),
writefail(9),
createfilefail(10),
filetoohuge(11),
buffertoosmall(12),
serverfail(13),
programming(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current operation status of file upload or download."
::= { devFunFwUpgradeAndBackup 9 }
devFwOperationImageId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The image ID need to upgrade."
DEFVAL { 1 }
::= { devFunFwUpgradeAndBackup 10 }
devFwNextBootImageId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The image ID when next boot up."
DEFVAL { 1 }
::= { devFunFwUpgradeAndBackup 11 }
devFwActualBootImageId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The image ID that current boot-up."
::= { devFunFwUpgradeAndBackup 12 }
-- --------------------------------------------------------------------
-- configuration information
-- --------------------------------------------------------------------
devFunCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF DevFunCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configuration entries."
::= { devFunConfigInfo 1 }
devFunCfgInfoEntry OBJECT-TYPE
SYNTAX DevFunCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configuration entries."
INDEX { devFunCfgId }
::= { devFunCfgInfoTable 1 }
DevFunCfgInfoEntry ::=
SEQUENCE {
devFunCfgId INTEGER,
devFunCfgSize INTEGER,
devFunCfgUpdateTime DisplayString
}
devFunCfgId OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each configuration id."
::= { devFunCfgInfoEntry 1 }
devFunCfgSize OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration file size by id."
::= { devFunCfgInfoEntry 2 }
devFunCfgUpdateTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration last update time by id."
::= { devFunCfgInfoEntry 3 }
-- ---------------------------------------------------------------------
-- Function bar config Back up to Tftp
-- ---------------------------------------------------------------------
devFunCfgServerIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Address type of IP Address of the remote system to which the switch file have to be transfer."
::= { devFunConfiguration 1 }
devFunCfgServerIpvxAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address of the remote system to which the switch file have to be transfer."
::= { devFunConfiguration 2 }
devFunCfgSrcFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure firmware filename to download or upload."
::= { devFunConfiguration 3 }
--devFunCfgType OBJECT-TYPE
--SYNTAX INTEGER {
-- startconfig(1),
-- runningconfig(2)
-- }
--MAX-ACCESS read-write
--STATUS current
--DESCRIPTION
-- "The current operating configuration type if current is operating download/upload configuration."
--DEFVAL { startconfig }
--::= { devFunConfiguration 4 }
devFunCfgStartUpConfigID OBJECT-TYPE
SYNTAX INTEGER {
config1(1),
config2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to select the restore configuration id."
DEFVAL { config1 }
::= { devFunConfiguration 4 }
devFunCfgOperConfigID OBJECT-TYPE
SYNTAX INTEGER {
config1(1),
config2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to select the operate configuration id for restore or backup."
DEFVAL { config1 }
::= { devFunConfiguration 5 }
devFunCfgOperation OBJECT-TYPE
SYNTAX INTEGER {
none(0),
download(1),
upload(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operates to perform download or upload file,
download means transfer file from server to dut,
upload means transfer file from dut to server."
::= { devFunConfiguration 6 }
devFunCfgSave OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Save current configuration to file."
DEFVAL { disabled }
::= { devFunConfiguration 7 }
devFunCfgOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
failure(2),
progressing(3),
transmit(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operation status of file upload or download."
::= { devFunConfiguration 8 }
devFunCfgTransferPercentage OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file transfer percentage of the file upload or download."
::= { devFunConfiguration 9 }
devFunCfgServerInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the interface name when the cmCfgServerIpvxAddr is linklocal address."
::= { devFunConfiguration 10 }
devFunCfgServerStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
internalerror(1),
nofileerror(2),
accessViolation(3),
memoryfull(4),
fileexists(5),
connecthostfail(6),
invalidarg(7),
readfail(8),
writefail(9),
createfilefail(10),
filetoohuge(11),
buffertoosmall(12),
serverfail(13),
programming(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operation status of file upload or download."
::= { devFunConfiguration 11 }
devFunCfgCurrStartUpConfigID OBJECT-TYPE
SYNTAX INTEGER {
config1(1),
config2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to refer to the startup configuration id."
DEFVAL { config1 }
::= { devFunConfiguration 12 }
-- ---------------------------------------------------------------------
-- Log Backup
-- ---------------------------------------------------------------------
devFunLogBackupToTftpIpType OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (1),
ipv6 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of IP interface."
::= { devFunLogBackup 1 }
devFunLogBackupToTftpIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP server's IP address is used to download Log file."
::= { devFunLogBackup 2 }
devFunLogBackupToTftpDestURL OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The Log filename is used to download to the tftp client."
::= { devFunLogBackup 3 }
devFunLogBackupToTftpOper OBJECT-TYPE
SYNTAX INTEGER {
false (0),
true (1)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The operate to backup log."
::= { devFunLogBackup 4 }
devFunLogBackupToTftStatus OBJECT-TYPE
SYNTAX INTEGER {
none (0),
success (1),
failure (2),
progressing (3)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The backup log status."
::= { devFunLogBackup 5 }
-- devFunLogBackupToTftpType OBJECT-TYPE
-- SYNTAX INTEGER {
-- systemLog (1),
-- attackLog (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Type of Log Backup."
-- ::= { devFunLogBackup 6 }
-- ---------------------------------------------------------------------
-- Ping
-- ---------------------------------------------------------------------
-- devPingDestIpType OBJECT IDENTIFIER ::= { devFunPing 1 }
-- devPingDestIpAddr OBJECT IDENTIFIER ::= { devFunPing 2 }
-- devPingTimeout OBJECT IDENTIFIER ::= { devFunPing 3 }
-- devPingTimes OBJECT IDENTIFIER ::= { devFunPing 4 }
--- devPingStart OBJECT IDENTIFIER ::= { devFunPing 5 }
-- devPingStatus OBJECT IDENTIFIER ::= { devFunPing 6 }
-- devPingSuccesses OBJECT IDENTIFIER ::= { devFunPing 7 }
-- devIPv4HistoryTable OBJECT IDENTIFIER ::= { devFunPing 8 }
-- devIPv6HistoryTable OBJECT IDENTIFIER ::= { devFunPing 9 }
-- ---------------------------------------------------------------------
-- IPv4/v6 Ping switch
-- ---------------------------------------------------------------------
devPingDestIpType OBJECT-TYPE
SYNTAX INTEGER{
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address type of the node to be pinged."
DEFVAL { ipv4 }
::= { devFunPing 1 }
devPingDestIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the node to be pinged, set ip type before set it."
::= { devFunPing 2 }
devPingTimeout OBJECT-TYPE
SYNTAX Integer32 (1..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in seconds after which the entity waiting
for the ping response times out."
::= { devFunPing 3 }
devPingTimes OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times the given node address is to be pinged.
value 0 for infinite times."
::= { devFunPing 4 }
devPingStart OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ping event of ping operate."
DEFVAL { disabled }
::= { devFunPing 5 }
devPingStatus OBJECT-TYPE
SYNTAX INTEGER {
notinitiated (1),
progress (2),
completed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the Ping operate"
::= { devFunPing 6 }
devPingSuccesses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ping responses received."
::= { devFunPing 7 }
-- ---------------------------------------------------------------------
-- IPv4 Table
-- ---------------------------------------------------------------------
devPingV4ProbeHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF DevPingV4ProbeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of ping
operations. The number of entries in this table is
limited per entry in the fsipv6PingTable by the value
of the corresponding cmPingProbeMaxRow object.
An implementation of this MIB will remove the oldest
entry in the cmPingProbeHistoryTable of the
corresponding entry in the cmPingProbeMaxRow to allow
the addition of an new entry once the number of rows
in the cmPingProbeHistoryTable reaches the value
specified by pingCtlMaxRows for the corresponding
entry in the cmPingProbeMaxRow."
::= { devFunPing 8 }
devPingV4ProbeHistoryEntry OBJECT-TYPE
SYNTAX DevPingV4ProbeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the cmPingProbeHistoryTable.
The first index elements identify the
Probe history entry that a fsPingTable belongs
to. The second index element selects a single
probe result."
INDEX {
devPingIndex,
devPingProbeIndex
}
::= { devPingV4ProbeHistoryTable 1 }
DevPingV4ProbeHistoryEntry ::= SEQUENCE {
devPingIndex INTEGER,
devPingProbeIndex INTEGER,
devPingProbeHistoryResponseTime Unsigned32
}
devPingIndex OBJECT-TYPE
SYNTAX INTEGER (0..9)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index identify the Probe history entry that
fsPingTable belongs to"
::= { devPingV4ProbeHistoryEntry 1 }
devPingProbeIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The probe history sequence of this entry belong to"
::= { devPingV4ProbeHistoryEntry 2 }
devPingProbeHistoryResponseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe."
::= { devPingV4ProbeHistoryEntry 3 }
-- ---------------------------------------------------------------------
-- IPv6 Table
-- ---------------------------------------------------------------------
devIpv6PingProbeHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF DevIpv6PingProbeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of ping
operations. The number of entries in this table is
limited per entry in the fsipv6PingTable by the value
of the corresponding cmIpv6PingProbeMaxRow object.
An implementation of this MIB will remove the oldest
entry in the cmIpv6PingProbeHistoryTable of the
corresponding entry in the cmIpv6PingProbeMaxRow to allow
the addition of an new entry once the number of rows
in the cmIpv6PingProbeHistoryTable reaches the value
specified by pingCtlMaxRows for the corresponding
entry in the cmIpv6PingProbeMaxRow."
::= { devFunPing 9 }
devIpv6PingProbeHistoryEntry OBJECT-TYPE
SYNTAX DevIpv6PingProbeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the cmIpv6PingProbeHistoryTable.
The first index elements identify the
Probe history entry that a fsIpv6PingTable belongs
to. The second index element selects a single
probe result."
INDEX {
devIpv6PingIndex,
devIpv6PingProbeIndex
}
::= { devIpv6PingProbeHistoryTable 1 }
DevIpv6PingProbeHistoryEntry ::= SEQUENCE {
devIpv6PingIndex INTEGER,
devIpv6PingProbeIndex INTEGER,
devIpv6PingProbeHistoryResponseTime Unsigned32
}
devIpv6PingIndex OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index identify the Probe history entry that
fsIpv6PingTable belongs to"
::= { devIpv6PingProbeHistoryEntry 1 }
devIpv6PingProbeIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The probe history sequence of this entry belong to"
::= { devIpv6PingProbeHistoryEntry 2 }
devIpv6PingProbeHistoryResponseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe."
::= { devIpv6PingProbeHistoryEntry 3 }
-- ---------------------------------------------------------------------
-- Language Management
-- ---------------------------------------------------------------------
-- devFunLangMgmt
devFunLangMgmtFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Language Management. Language File"
::= { devFunLangMgmt 1 }
devFunLangMgmtApply OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Language Management. Apply"
::= { devFunLangMgmt 2 }
-- ---------------------------------------------------------------------
-- Reset and Reboot System
-- ---------------------------------------------------------------------
devFunRestart OBJECT-TYPE
SYNTAX INTEGER {
noreboot(1),
reboot(2),
reset(3),
resetwithoutip(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to restart the Switch
(i.e)the entire switch will operationally go down and
start again.
This objects also allows user to reset swith(all configuration
set to default) and reset switch without ip(except ip configuration
saved, configuration set to default) and reset switch without ip and
vlan(except ip and vlan configuration saved, configuration set to default)
When the switch operationally goes down, configuration
save operation is initiated based on the configuration save
option chosen.
When the switch operationally come up, the saved configurations
are restored based on the restore option chosen.
Once the switch is restarted, the value of this object reverts
to noreboot."
DEFVAL { noreboot }
::= { deviceFunction 8 }
devFunWizardIgnoreNextTime OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates Smart Wizard ignore next time or not."
DEFVAL { disabled }
::= { deviceFunction 9 }
-- ---------------------------------------------------------------------
-- Error code Information
-- ---------------------------------------------------------------------
deviceErrorCodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DeviceErrorCodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { deviceErrorCodeInformation 1 }
deviceErrorCodeEntry OBJECT-TYPE
SYNTAX DeviceErrorCodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { devErrorCodeIndex }
::= { deviceErrorCodeTable 1 }
DeviceErrorCodeEntry ::=
SEQUENCE {
devErrorCodeIndex Integer32,
devErrorString DisplayString
}
devErrorCodeIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error code index."
::= { deviceErrorCodeEntry 1 }
devErrorString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error string of the index."
::= { deviceErrorCodeEntry 2 }
-- ---------------------------------------------------------------------
-- Fan Status
-- ---------------------------------------------------------------------
deviceFanStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
fail(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable Loopback detection function.
The Loopback Detection function is used to detect the thermal sensor's
status is ok or not , if the status is Enable ,that means the smartfan module
will be on work ,it will detect the thermal sensor and send status change log."
DEFVAL { fail }
::= { deviceFan 1 }
-- ------------------------------------------------------------------
-- ACLGroup
-- ------------------------------------------------------------------
aclProfile OBJECT IDENTIFIER ::= { aclGroup 1 }
aclProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to ACL profile .
"
::= { aclProfile 1 }
aclProfileEntry OBJECT-TYPE
SYNTAX AclProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a ACL profile.
Index to the table is ACL profile ID. "
INDEX { aclProfileNo}
::= { aclProfileTable 1 }
AclProfileEntry ::=
SEQUENCE {
aclProfileNo
Integer32,
aclProfileName
SnmpAdminString,
aclProfileType
INTEGER,
aclProfileRuleCount
Integer32,
aclProfileRemark
SnmpAdminString,
aclProfileRuleIdStart
INTEGER,
aclProfileRuleIdStep
INTEGER,
aclProfileRuleCounterState
INTEGER,
aclProfileRuleCounterClear
INTEGER,
aclProfileStatus
RowStatus
}
aclProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL Profile ID. The ID 1 to 50 is user-defined ACL,
and the ID more than 50 is reserved for system-defined ACL.
The user only allow to create user-defined ACL ID.
And system-defined ACL is read only."
::= { aclProfileEntry 1 }
aclProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the Profile."
::= { aclProfileEntry 2 }
aclProfileType OBJECT-TYPE
SYNTAX INTEGER {
l2 (1),
l3v4 (2),
l3v4Ext(3),
l3v6 (4),
l3v6Ext (5),
expert (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile type, possible value are
l2 (1) - for MAC-based rule,
l3v4 (2) - for IPv4-based rule,
l3v4Ext (3) - for IPv4-Ext rule,
l3v6 (4) - for IPv6-based rule.
Note that only l2, l3 and l3v6 could be set by user,
other is reserved for system to show information.
"
::= { aclProfileEntry 3 }
aclProfileRuleCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rules in this profile."
::= { aclProfileEntry 4 }
aclProfileRemark OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"acl group description which is long and more detailed."
::= { aclProfileEntry 5 }
aclProfileRuleIdStart OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the start rule id in this acl group."
::= { aclProfileEntry 6 }
aclProfileRuleIdStep OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the step of the rule id in this acl group."
::= { aclProfileEntry 7 }
aclProfileRuleCounterState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the state of hw counter for this acl group."
::= { aclProfileEntry 8 }
aclProfileRuleCounterClear OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear rule hw counter for this acl group."
::= { aclProfileEntry 9 }
aclProfileStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of aclProfileType,
aclProfileMask and ProtocolType are not conflicted.
"
::= { aclProfileEntry 10 }
-- L2 Filter Group --------------------------------------------------
aclL2Rule OBJECT IDENTIFIER ::= { aclGroup 2 }
aclL2RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { aclL2Rule 1 }
aclL2RuleEntry OBJECT-TYPE
SYNTAX AclL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID."
INDEX { aclL2ProfileID , aclL2AccessID }
::= { aclL2RuleTable 1 }
AclL2RuleEntry ::=
SEQUENCE {
aclL2ProfileID
Integer32,
aclL2AccessID
Integer32,
aclL2RuleEtherType
Integer32,
aclL2RuleDstMacAddr
MacAddress,
aclL2RuleSrcMacAddr
MacAddress,
aclL2RuleVlanId
Integer32,
aclL2Rule1pPriority
Integer32,
aclL2RuleDstMacAddrMask
MacAddress,
aclL2RuleSrcMacAddrMask
MacAddress,
aclL2RuleTimeRange
SnmpAdminString,
aclL2RuleAction
INTEGER,
aclL2RuleEtherTypeMask
Integer32,
aclL2RuleMatchCount
Counter32,
aclL2RuleStatus
RowStatus
}
aclL2ProfileID OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL Profile ID which this rule join."
DEFVAL { 1 }
::= { aclL2RuleEntry 1 }
aclL2AccessID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L2 Filter rule ID."
::= { aclL2RuleEntry 2 }
aclL2RuleEtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '0', which means the rule don't care this
condition.
The aclL2EtherFrameType should be specified as ether-type."
DEFVAL { 0 }
::= { aclL2RuleEntry 3 }
aclL2RuleDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition."
::= { aclL2RuleEntry 4 }
aclL2RuleSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address"
::= { aclL2RuleEntry 5 }
aclL2RuleVlanId OBJECT-TYPE
SYNTAX Integer32 (-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL2RuleEntry 6 }
aclL2Rule1pPriority OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL2RuleEntry 7 }
aclL2RuleDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address Mask work for Destination MAC address."
::= { aclL2RuleEntry 8 }
aclL2RuleSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address Mask work for Source MAC address."
::= { aclL2RuleEntry 9 }
aclL2RuleTimeRange OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the Profile."
::= { aclL2RuleEntry 10 }
aclL2RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { aclL2RuleEntry 11 }
aclL2RuleEtherTypeMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition.
The aclL2EtherFrameType should be specified as ether-type."
DEFVAL { -1 }
::= { aclL2RuleEntry 12 }
aclL2RuleMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { aclL2RuleEntry 13 }
aclL2RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL2RuleEntry 14 }
-- L3 Filter Group --------------------------------------------------
aclL3v4Rule OBJECT IDENTIFIER ::= { aclGroup 3 }
aclL3v4RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclL3v4RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { aclL3v4Rule 1 }
aclL3v4RuleEntry OBJECT-TYPE
SYNTAX AclL3v4RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number. "
INDEX { aclL3v4RuleProfileNo, aclL3v4RuleAccessID }
::= { aclL3v4RuleTable 1 }
AclL3v4RuleEntry ::=
SEQUENCE {
aclL3v4RuleProfileNo
Integer32,
aclL3v4RuleAccessID
Integer32,
aclL3v4RuleDstIpAddr
IpAddress,
aclL3v4RuleSrcIpAddr
IpAddress,
aclL3v4RuleDstIpAddrMask
IpAddress,
aclL3v4RuleSrcIpAddrMask
IpAddress,
aclL3v4RuleAction
INTEGER,
aclL3v4RuleTimeRange
SnmpAdminString,
aclL3v4RuleMatchCount
Counter32,
aclL3v4RuleStatus
RowStatus
}
aclL3v4RuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { aclL3v4RuleEntry 1 }
aclL3v4RuleAccessID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID."
::= { aclL3v4RuleEntry 2 }
aclL3v4RuleDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3v4RuleEntry 3 }
aclL3v4RuleSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3v4RuleEntry 4 }
aclL3v4RuleDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address."
DEFVAL { 'FFFFFFFF'h }
::= { aclL3v4RuleEntry 5 }
aclL3v4RuleSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address."
DEFVAL { 'FFFFFFFF'h }
::= { aclL3v4RuleEntry 6 }
aclL3v4RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { aclL3v4RuleEntry 7 }
aclL3v4RuleTimeRange OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the Profile."
::= { aclL3v4RuleEntry 8 }
aclL3v4RuleMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { aclL3v4RuleEntry 9 }
aclL3v4RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL3v4RuleEntry 10 }
-- L3v4 Ext Filter Group --------------------------------------------------
aclL3v4ExtRule OBJECT IDENTIFIER ::= { aclGroup 4 }
aclL3v4ExtRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclL3v4ExtRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { aclL3v4ExtRule 1 }
aclL3v4ExtRuleEntry OBJECT-TYPE
SYNTAX AclL3v4ExtRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number. "
INDEX { aclL3v4ExtRuleProfileNo, aclL3v4ExtRuleAccessID }
::= { aclL3v4ExtRuleTable 1 }
AclL3v4ExtRuleEntry ::=
SEQUENCE {
aclL3v4ExtRuleProfileNo
Integer32,
aclL3v4ExtRuleAccessID
Integer32,
aclL3v4ExtRuleProtocol
INTEGER,
aclL3v4ExtRuleFragments
INTEGER,
aclL3v4ExtRuleICMPMessageType
Integer32,
aclL3v4ExtRuleICMPMessageCode
Integer32,
aclL3v4ExtRuleDstIpAddr
IpAddress,
aclL3v4ExtRuleSrcIpAddr
IpAddress,
aclL3v4ExtRuleDstIpAddrMask
IpAddress,
aclL3v4ExtRuleSrcIpAddrMask
IpAddress,
aclL3v4ExtRuleTcpUdpDstOperator
INTEGER,
aclL3v4ExtRuleTcpUdpDstPort
Integer32,
aclL3v4ExtRuleTcpUdpMinDstPort
Unsigned32,
aclL3v4ExtRuleTcpUdpMaxDstPort
Unsigned32,
aclL3v4ExtRuleTcpUdpSrcOperator
INTEGER,
aclL3v4ExtRuleTcpUdpSrcPort
Integer32,
aclL3v4ExtRuleTcpUdpMinSrcPort
Unsigned32,
aclL3v4ExtRuleTcpUdpMaxSrcPort
Unsigned32,
aclL3v4ExtRuleIPPrecedence
Integer32,
aclL3v4ExtRuleDscp
Integer32,
aclL3v4ExtRuleToS
Integer32,
aclL3v4ExtRuleTcpAckBit
INTEGER,
aclL3v4ExtRuleTcpRstBit
INTEGER,
aclL3v4ExtRuleTcpUrgBit
INTEGER,
aclL3v4ExtRuleTcpPshBit
INTEGER,
aclL3v4ExtRuleTcpSynBit
INTEGER,
aclL3v4ExtRuleTcpFinBit
INTEGER,
aclL3v4ExtRuleAction
INTEGER,
aclL3v4ExtRuleTimeRange
SnmpAdminString,
aclL3v4ExtRuleMatchCount
Counter32,
aclL3v4ExtRuleStatus
RowStatus
}
aclL3v4ExtRuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { aclL3v4ExtRuleEntry 1 }
aclL3v4ExtRuleAccessID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID."
::= { aclL3v4ExtRuleEntry 2 }
aclL3v4ExtRuleProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(0),
icmp(1),
igmp(2),
tcp(6),
udp(17),
gre(47),
esp(50),
eigrp(88),
ospf(89),
ipinip(94),
pim(103),
pcp(108),
vrrp(112)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
DEFVAL { 0 }
::= { aclL3v4ExtRuleEntry 3 }
aclL3v4ExtRuleFragments OBJECT-TYPE
SYNTAX INTEGER {
none (0),
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
DEFVAL { none }
::= { aclL3v4ExtRuleEntry 4 }
aclL3v4ExtRuleICMPMessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { aclL3v4ExtRuleEntry 5 }
aclL3v4ExtRuleICMPMessageCode OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
"
DEFVAL { -1 }
::= { aclL3v4ExtRuleEntry 6 }
aclL3v4ExtRuleDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3v4ExtRuleEntry 7 }
aclL3v4ExtRuleSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3v4ExtRuleEntry 8 }
aclL3v4ExtRuleDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address."
DEFVAL { 'FFFFFFFF'h }
::= { aclL3v4ExtRuleEntry 9 }
aclL3v4ExtRuleSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address."
DEFVAL { 'FFFFFFFF'h }
::= { aclL3v4ExtRuleEntry 10 }
aclL3v4ExtRuleTcpUdpDstOperator OBJECT-TYPE
SYNTAX INTEGER {
none(1),
eq(2),
gt(3),
lt(4),
neq(5),
range(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers."
DEFVAL { 1 }
::= { aclL3v4ExtRuleEntry 11 }
aclL3v4ExtRuleTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL3v4ExtRuleEntry 12 }
aclL3v4ExtRuleTcpUdpMinDstPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the destination port range."
DEFVAL { 0 }
::= { aclL3v4ExtRuleEntry 13 }
aclL3v4ExtRuleTcpUdpMaxDstPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the destination port range."
DEFVAL { 65535 }
::= { aclL3v4ExtRuleEntry 14 }
aclL3v4ExtRuleTcpUdpSrcOperator OBJECT-TYPE
SYNTAX INTEGER {
none(1),
eq(2),
gt(3),
lt(4),
neq(5),
range(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers."
DEFVAL { 1 }
::= { aclL3v4ExtRuleEntry 15 }
aclL3v4ExtRuleTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL3v4ExtRuleEntry 16 }
aclL3v4ExtRuleTcpUdpMinSrcPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the source port range."
DEFVAL { 0 }
::= { aclL3v4ExtRuleEntry 17 }
aclL3v4ExtRuleTcpUdpMaxSrcPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the source port range."
DEFVAL { 65535 }
::= { aclL3v4ExtRuleEntry 18 }
aclL3v4ExtRuleIPPrecedence OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
DEFVAL { -1 }
::= { aclL3v4ExtRuleEntry 19 }
aclL3v4ExtRuleDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The aclL3RuleTos should be specified as dscp."
DEFVAL { -1 }
::= { aclL3v4ExtRuleEntry 20 }
aclL3v4ExtRuleToS OBJECT-TYPE
SYNTAX Integer32 (-1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ToS value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The cmAclL3RuleTos should be specified as dscp."
DEFVAL { -1 }
::= { aclL3v4ExtRuleEntry 21 }
aclL3v4ExtRuleTcpAckBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v4ExtRuleEntry 22 }
aclL3v4ExtRuleTcpRstBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v4ExtRuleEntry 23 }
aclL3v4ExtRuleTcpUrgBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Urg bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v4ExtRuleEntry 24 }
aclL3v4ExtRuleTcpPshBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Psh bit to be checked against the packet. The default
value is 'donotcare'(3). which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v4ExtRuleEntry 25 }
aclL3v4ExtRuleTcpSynBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Syn bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this condition."
DEFVAL { donotcare }
::= { aclL3v4ExtRuleEntry 26 }
aclL3v4ExtRuleTcpFinBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Fin bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v4ExtRuleEntry 27 }
aclL3v4ExtRuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { aclL3v4ExtRuleEntry 28 }
aclL3v4ExtRuleTimeRange OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the Profile."
::= { aclL3v4ExtRuleEntry 29 }
aclL3v4ExtRuleMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { aclL3v4ExtRuleEntry 30 }
aclL3v4ExtRuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL3v4ExtRuleEntry 31 }
-- L3v6 Filter Group --------------------------------------------------
aclL3v6Rule OBJECT IDENTIFIER ::= { aclGroup 5 }
aclL3v6RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclL3v6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 ipv6 filter rules in the system."
::= { aclL3v6Rule 1 }
aclL3v6RuleEntry OBJECT-TYPE
SYNTAX AclL3v6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 ipv6 filter rule.
Index to the table is L3 ipv6 filter number. "
INDEX { aclL3v6RuleProfileNo, aclL3v6RuleAccessID }
::= { aclL3v6RuleTable 1 }
AclL3v6RuleEntry ::=
SEQUENCE {
aclL3v6RuleProfileNo
Integer32,
aclL3v6RuleAccessID
Integer32,
aclL3v6RuleDstIpv6Addr
Ipv6Address,
aclL3v6RuleSrcIpv6Addr
Ipv6Address,
aclL3v6RuleDstIpv6AddrPrefixLen
InetAddressPrefixLength,
aclL3v6RuleSrcIpv6AddrPrefixLen
InetAddressPrefixLength,
aclL3v6RuleAction
INTEGER,
aclL3v6RuleTimeRange
SnmpAdminString,
aclL3v6RuleMatchCount
Counter32,
aclL3v6RuleStatus
RowStatus
}
aclL3v6RuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { aclL3v6RuleEntry 1 }
aclL3v6RuleAccessID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID."
::= { aclL3v6RuleEntry 2 }
aclL3v6RuleDstIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IPv6 address to be matched with the packet."
::= { aclL3v6RuleEntry 3 }
aclL3v6RuleSrcIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IPv6 address to be matched with the packet."
::= { aclL3v6RuleEntry 4 }
aclL3v6RuleDstIpv6AddrPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The prefix length for Destination IPv6 address."
DEFVAL { 0 }
::= { aclL3v6RuleEntry 5 }
aclL3v6RuleSrcIpv6AddrPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The prefix length for Source IPv6 address."
DEFVAL { 0 }
::= { aclL3v6RuleEntry 6 }
aclL3v6RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { aclL3v6RuleEntry 7 }
aclL3v6RuleTimeRange OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the Profile."
::= { aclL3v6RuleEntry 8 }
aclL3v6RuleMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { aclL3v6RuleEntry 9 }
aclL3v6RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL3v6RuleEntry 10 }
-- L3v6 Ext Filter Group --------------------------------------------------
aclL3v6ExtRule OBJECT IDENTIFIER ::= { aclGroup 6 }
aclL3v6ExtRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclL3v6ExtRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 ipv6 filter rules in the system."
::= { aclL3v6ExtRule 1 }
aclL3v6ExtRuleEntry OBJECT-TYPE
SYNTAX AclL3v6ExtRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 ipv6 filter rule.
Index to the table is L3 ipv6 filter number. "
INDEX { aclL3v6ExtRuleProfileNo, aclL3v6ExtRuleAccessID }
::= { aclL3v6ExtRuleTable 1 }
AclL3v6ExtRuleEntry ::=
SEQUENCE {
aclL3v6ExtRuleProfileNo
Integer32,
aclL3v6ExtRuleAccessID
Integer32,
aclL3v6ExtRuleDscp
Integer32,
aclL3v6ExtRuleProtocol
INTEGER,
aclL3v6ExtRuleFragments
INTEGER,
aclL3v6ExtRuleTcpUdpDstOperator
INTEGER,
aclL3v6ExtRuleTcpUdpDstPort
Integer32,
aclL3v6ExtRuleTcpUdpMinDstPort
Unsigned32,
aclL3v6ExtRuleTcpUdpMaxDstPort
Unsigned32,
aclL3v6ExtRuleTcpUdpSrcOperator
INTEGER,
aclL3v6ExtRuleTcpUdpSrcPort
Integer32,
aclL3v6ExtRuleTcpUdpMinSrcPort
Unsigned32,
aclL3v6ExtRuleTcpUdpMaxSrcPort
Unsigned32,
aclL3v6ExtRuleICMPv6MessageType
Integer32,
aclL3v6ExtRuleICMPv6MessageCode
Integer32,
aclL3v6ExtRuleDstIpv6Addr
Ipv6Address,
aclL3v6ExtRuleSrcIpv6Addr
Ipv6Address,
aclL3v6ExtRuleDstIpv6AddrPrefixLen
InetAddressPrefixLength,
aclL3v6ExtRuleSrcIpv6AddrPrefixLen
InetAddressPrefixLength,
aclL3v6ExtRuleTcpAckBit
INTEGER,
aclL3v6ExtRuleTcpRstBit
INTEGER,
aclL3v6ExtRuleTcpUrgBit
INTEGER,
aclL3v6ExtRuleTcpPshBit
INTEGER,
aclL3v6ExtRuleTcpSynBit
INTEGER,
aclL3v6ExtRuleTcpFinBit
INTEGER,
aclL3v6ExtRuleFlowLabel
Integer32,
aclL3v6ExtRuleAction
INTEGER,
aclL3v6ExtRuleTimeRange
SnmpAdminString,
aclL3v6ExtRuleMatchCount
Counter32,
aclL3v6ExtRuleStatus
RowStatus
}
aclL3v6ExtRuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { aclL3v6ExtRuleEntry 1 }
aclL3v6ExtRuleAccessID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID."
::= { aclL3v6ExtRuleEntry 2 }
aclL3v6ExtRuleDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition."
DEFVAL { -1 }
::= { aclL3v6ExtRuleEntry 3 }
aclL3v6ExtRuleProtocol OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
DEFVAL { 0 }
::= { aclL3v6ExtRuleEntry 4 }
aclL3v6ExtRuleFragments OBJECT-TYPE
SYNTAX INTEGER {
none (0),
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
DEFVAL { none }
::= { aclL3v6ExtRuleEntry 5 }
aclL3v6ExtRuleTcpUdpDstOperator OBJECT-TYPE
SYNTAX INTEGER {
none(1),
eq(2),
gt(3),
lt(4),
neq(5),
range(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers."
DEFVAL { 1 }
::= { aclL3v6ExtRuleEntry 6 }
aclL3v6ExtRuleTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { 0 }
::= { aclL3v6ExtRuleEntry 7 }
aclL3v6ExtRuleTcpUdpMinDstPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the destination port range."
DEFVAL { 0 }
::= { aclL3v6ExtRuleEntry 8 }
aclL3v6ExtRuleTcpUdpMaxDstPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the destination port range."
DEFVAL { 65535 }
::= { aclL3v6ExtRuleEntry 9 }
aclL3v6ExtRuleTcpUdpSrcOperator OBJECT-TYPE
SYNTAX INTEGER {
none(1),
eq(2),
gt(3),
lt(4),
neq(5),
range(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers."
DEFVAL { 1 }
::= { aclL3v6ExtRuleEntry 10 }
aclL3v6ExtRuleTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { 0 }
::= { aclL3v6ExtRuleEntry 11 }
aclL3v6ExtRuleTcpUdpMinSrcPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the source port range."
DEFVAL { 0 }
::= { aclL3v6ExtRuleEntry 12 }
aclL3v6ExtRuleTcpUdpMaxSrcPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the source port range."
DEFVAL { 65535 }
::= { aclL3v6ExtRuleEntry 13 }
aclL3v6ExtRuleICMPv6MessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { aclL3v6ExtRuleEntry 14 }
aclL3v6ExtRuleICMPv6MessageCode OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
"
DEFVAL { -1 }
::= { aclL3v6ExtRuleEntry 15 }
aclL3v6ExtRuleDstIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IPv6 address to be matched with the packet."
::= { aclL3v6ExtRuleEntry 16 }
aclL3v6ExtRuleSrcIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IPv6 address to be matched with the packet."
::= { aclL3v6ExtRuleEntry 17 }
aclL3v6ExtRuleDstIpv6AddrPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The prefix length for Destination IPv6 address."
DEFVAL { 0 }
::= { aclL3v6ExtRuleEntry 18 }
aclL3v6ExtRuleSrcIpv6AddrPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The prefix length for Source IPv6 address."
DEFVAL { 0 }
::= { aclL3v6ExtRuleEntry 19 }
aclL3v6ExtRuleTcpAckBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v6ExtRuleEntry 20 }
aclL3v6ExtRuleTcpRstBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v6ExtRuleEntry 21 }
aclL3v6ExtRuleTcpUrgBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Urg bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v6ExtRuleEntry 22 }
aclL3v6ExtRuleTcpPshBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Psh bit to be checked against the packet. The default
value is 'donotcare'(3). which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v6ExtRuleEntry 23 }
aclL3v6ExtRuleTcpSynBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Syn bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this condition."
DEFVAL { donotcare }
::= { aclL3v6ExtRuleEntry 24 }
aclL3v6ExtRuleTcpFinBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Fin bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclL3v6ExtRuleEntry 25 }
aclL3v6ExtRuleFlowLabel OBJECT-TYPE
SYNTAX Integer32 (-1..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow identifier in an IPv6 header."
::= { aclL3v6ExtRuleEntry 26 }
aclL3v6ExtRuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { aclL3v6ExtRuleEntry 27 }
aclL3v6ExtRuleTimeRange OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the Profile."
::= { aclL3v6ExtRuleEntry 28 }
aclL3v6ExtRuleMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { aclL3v6ExtRuleEntry 29 }
aclL3v6ExtRuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL3v6ExtRuleEntry 30 }
-- Expert Ext Filter Group --------------------------------------------------
aclExpertExtRule OBJECT IDENTIFIER ::= { aclGroup 7 }
aclExpertExtRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclExpertExtRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { aclExpertExtRule 1 }
aclExpertExtRuleEntry OBJECT-TYPE
SYNTAX AclExpertExtRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number. "
INDEX { aclExpertExtRuleProfileNo, aclExpertExtRuleAccessID }
::= { aclExpertExtRuleTable 1 }
AclExpertExtRuleEntry ::=
SEQUENCE {
aclExpertExtRuleProfileNo
Integer32,
aclExpertExtRuleAccessID
Integer32,
aclExpertExtRuleProtocol
INTEGER,
aclExpertExtRuleFragments
INTEGER,
aclExpertExtRuleICMPMessageType
Integer32,
aclExpertExtRuleICMPMessageCode
Integer32,
aclExpertExtRuleDstIpAddr
IpAddress,
aclExpertExtRuleSrcIpAddr
IpAddress,
aclExpertExtRuleDstIpAddrMask
IpAddress,
aclExpertExtRuleSrcIpAddrMask
IpAddress,
aclExpertExtRuleTcpUdpDstOperator
INTEGER,
aclExpertExtRuleTcpUdpDstPort
Integer32,
aclExpertExtRuleTcpUdpMinDstPort
INTEGER,
aclExpertExtRuleTcpUdpMaxDstPort
INTEGER,
aclExpertExtRuleTcpUdpSrcOperator
INTEGER,
aclExpertExtRuleTcpUdpSrcPort
Integer32,
aclExpertExtRuleTcpUdpMinSrcPort
INTEGER,
aclExpertExtRuleTcpUdpMaxSrcPort
INTEGER,
aclExpertExtRuleIPPrecedence
Integer32,
aclExpertExtRuleDscp
Integer32,
aclExpertExtRuleToS
Integer32,
aclExpertExtRuleTcpAckBit
INTEGER,
aclExpertExtRuleTcpRstBit
INTEGER,
aclExpertExtRuleTcpUrgBit
INTEGER,
aclExpertExtRuleTcpPshBit
INTEGER,
aclExpertExtRuleTcpSynBit
INTEGER,
aclExpertExtRuleTcpFinBit
INTEGER,
aclExpertExtRuleDstMacAddr
MacAddress,
aclExpertExtRuleSrcMacAddr
MacAddress,
aclExpertExtRuleVlanId
Integer32,
aclExpertExtRule1pPriority
Integer32,
aclExpertExtRuleDstMacAddrMask
MacAddress,
aclExpertExtRuleSrcMacAddrMask
MacAddress,
aclExpertExtRuleAction
INTEGER,
aclExpertExtRuleTimeRange
SnmpAdminString,
aclExpertExtRuleMatchCount
Counter32,
aclExpertExtRuleStatus
RowStatus
}
aclExpertExtRuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { aclExpertExtRuleEntry 1 }
aclExpertExtRuleAccessID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID."
::= { aclExpertExtRuleEntry 2 }
aclExpertExtRuleProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(0),
icmp(1),
igmp(2),
tcp(6),
udp(17),
gre(47),
esp(50),
eigrp(88),
ospf(89),
ipinip(94),
pim(103),
pcp(108),
vrrp(112)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
DEFVAL { 0 }
::= { aclExpertExtRuleEntry 3 }
aclExpertExtRuleFragments OBJECT-TYPE
SYNTAX INTEGER {
none (0),
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
DEFVAL { none }
::= { aclExpertExtRuleEntry 4 }
aclExpertExtRuleICMPMessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { aclExpertExtRuleEntry 5 }
aclExpertExtRuleICMPMessageCode OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
"
DEFVAL { -1 }
::= { aclExpertExtRuleEntry 6 }
aclExpertExtRuleDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { aclExpertExtRuleEntry 7 }
aclExpertExtRuleSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { aclExpertExtRuleEntry 8 }
aclExpertExtRuleDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address."
DEFVAL { 'FFFFFFFF'h }
::= { aclExpertExtRuleEntry 9 }
aclExpertExtRuleSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address."
DEFVAL { 'FFFFFFFF'h }
::= { aclExpertExtRuleEntry 10 }
aclExpertExtRuleTcpUdpDstOperator OBJECT-TYPE
SYNTAX INTEGER {
none(1),
eq(2),
gt(3),
lt(4),
neq(5),
range(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers."
DEFVAL { 1 }
::= { aclExpertExtRuleEntry 11 }
aclExpertExtRuleTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclExpertExtRuleEntry 12 }
aclExpertExtRuleTcpUdpMinDstPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the destination port range."
DEFVAL { 0 }
::= { aclExpertExtRuleEntry 13 }
aclExpertExtRuleTcpUdpMaxDstPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the destination port range."
DEFVAL { 0 }
::= { aclExpertExtRuleEntry 14 }
aclExpertExtRuleTcpUdpSrcOperator OBJECT-TYPE
SYNTAX INTEGER {
none(1),
eq(2),
gt(3),
lt(4),
neq(5),
range(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers."
DEFVAL { 1 }
::= { aclExpertExtRuleEntry 15 }
aclExpertExtRuleTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclExpertExtRuleEntry 16 }
aclExpertExtRuleTcpUdpMinSrcPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the source port range."
DEFVAL { 0 }
::= { aclExpertExtRuleEntry 17 }
aclExpertExtRuleTcpUdpMaxSrcPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the source port range."
DEFVAL { 0 }
::= { aclExpertExtRuleEntry 18 }
aclExpertExtRuleIPPrecedence OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
DEFVAL { -1 }
::= { aclExpertExtRuleEntry 19 }
aclExpertExtRuleDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The aclL3RuleTos should be specified as dscp."
DEFVAL { -1 }
::= { aclExpertExtRuleEntry 20 }
aclExpertExtRuleToS OBJECT-TYPE
SYNTAX Integer32 (-1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ToS value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The cmAclL3RuleTos should be specified as dscp."
DEFVAL { -1 }
::= { aclExpertExtRuleEntry 21 }
aclExpertExtRuleTcpAckBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclExpertExtRuleEntry 22 }
aclExpertExtRuleTcpRstBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclExpertExtRuleEntry 23 }
aclExpertExtRuleTcpUrgBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Urg bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclExpertExtRuleEntry 24 }
aclExpertExtRuleTcpPshBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Psh bit to be checked against the packet. The default
value is 'donotcare'(3). which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclExpertExtRuleEntry 25 }
aclExpertExtRuleTcpSynBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Syn bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this condition."
DEFVAL { donotcare }
::= { aclExpertExtRuleEntry 26 }
aclExpertExtRuleTcpFinBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
donotcare(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Fin bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition."
DEFVAL { donotcare }
::= { aclExpertExtRuleEntry 27 }
aclExpertExtRuleDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition."
::= { aclExpertExtRuleEntry 28 }
aclExpertExtRuleSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address"
::= { aclExpertExtRuleEntry 29 }
aclExpertExtRuleVlanId OBJECT-TYPE
SYNTAX Integer32 (-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclExpertExtRuleEntry 30 }
aclExpertExtRule1pPriority OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclExpertExtRuleEntry 31 }
aclExpertExtRuleDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address Mask work for Destination MAC address."
::= { aclExpertExtRuleEntry 32 }
aclExpertExtRuleSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address Mask work for Source MAC address."
::= { aclExpertExtRuleEntry 33 }
aclExpertExtRuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { aclExpertExtRuleEntry 34 }
aclExpertExtRuleTimeRange OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the Profile."
::= { aclExpertExtRuleEntry 35 }
aclExpertExtRuleMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { aclExpertExtRuleEntry 36 }
aclExpertExtRuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclExpertExtRuleEntry 37 }
-- Port Binding Group
aclPortBindGroup OBJECT IDENTIFIER ::= { aclGroup 8 }
aclPortGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port group binding information of L2 Group,
L3v4 Group, and L3v6 Group"
::= { aclPortBindGroup 1 }
aclPortGroupEntry OBJECT-TYPE
SYNTAX AclPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { aclPortIndex }
::= { aclPortGroupTable 1 }
AclPortGroupEntry ::=
SEQUENCE {
aclPortIndex
Integer32,
aclPortDirection
INTEGER,
aclPortL2ProfileNo
Integer32,
aclPortL3v4StdProfileNo
Integer32,
aclPortL3v4ExtProfileNo
Integer32,
aclPortL3v6StdProfileNo
Integer32,
aclPortL3v6ExtProfileNo
Integer32,
aclPortExpertProfileNo
Integer32
}
aclPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { aclPortGroupEntry 1 }
aclPortDirection OBJECT-TYPE
SYNTAX INTEGER {
in (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { in }
::= { aclPortGroupEntry 2 }
aclPortL2ProfileNo OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The L2 Profile ID which this port bind.
zero means not configured."
::= { aclPortGroupEntry 3 }
aclPortL3v4StdProfileNo OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The L3v4 Profile ID which this port bind.
zero means not configured."
::= { aclPortGroupEntry 4 }
aclPortL3v4ExtProfileNo OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The L3v4 Profile ID which this port bind.
zero means not configured."
::= { aclPortGroupEntry 5 }
aclPortL3v6StdProfileNo OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The L3v6 Profile ID which this port bind.
zero means not configured."
::= { aclPortGroupEntry 6 }
aclPortL3v6ExtProfileNo OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The L3v6 Profile ID which this port bind.
zero means not configured."
::= { aclPortGroupEntry 7 }
aclPortExpertProfileNo OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The L3v6 Profile ID which this port bind.
zero means not configured."
::= { aclPortGroupEntry 8 }
-- Vlan Binding Group
-- aclVlanBindGroup OBJECT IDENTIFIER ::= { aclGroup 9 }
-- aclVlanGroupTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AclVlanGroupEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table to control the vlan group binding information of L2 Group,
-- L3v4 Group, and L3v6 Group"
-- ::= { aclVlanBindGroup 1 }
-- aclVlanGroupEntry OBJECT-TYPE
-- SYNTAX AclVlanGroupEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "An entry appears in this table for each interface in the system.
--
-- Index to the table is the interface index of the vlan."
-- INDEX { aclVlanAccessMapName, aclVlanSubMapNo }
-- ::= { aclVlanGroupTable 1 }
-- AclVlanGroupEntry ::=
-- SEQUENCE {
-- aclVlanAccessMapName
-- SnmpAdminString,
-- aclVlanSubMapNo
-- Integer32,
-- aclVlanAction
-- INTEGER,
-- aclVlanRedirectPort
-- Integer32,
-- aclVlanMatchL2ProfileNo
-- Integer32,
-- aclVlanMatchL3v4ProfileNo
-- Integer32,
-- aclVlanMatchL3v4ExtProfileNo
-- Integer32,
-- aclVlanMatchL3v6ProfileNo
-- Integer32,
-- aclVlanMatchL3v6ExtProfileNo
-- Integer32,
-- aclVlanMatchExpertProfileNo
-- Integer32,
-- aclVlanRuleStatus
-- RowStatus
-- }
-- aclVlanAccessMapName OBJECT-TYPE
-- SYNTAX SnmpAdminString (SIZE (0..32))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "An administratively assigned string, which may be used
-- to identify the Profile."
-- ::= { aclVlanGroupEntry 1 }
-- aclVlanSubMapNo OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Interface index of the vlan for the configuration
-- in this entry applies."
-- ::= { aclVlanGroupEntry 2 }
-- aclVlanAction OBJECT-TYPE
-- SYNTAX INTEGER {
-- forward (1),
-- drop (2),
-- redirect (3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies the action to be taken on the packet if the filter
-- rule matches."
-- DEFVAL { forward }
-- ::= { aclVlanGroupEntry 3 }
-- aclVlanRedirectPort OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Interface index of the port for the configuration
-- in this entry applies."
-- ::= { aclVlanGroupEntry 4 }
-- aclVlanMatchL2ProfileNo OBJECT-TYPE
-- SYNTAX Integer32 (0..50)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The L2 Profile ID which this vlan bind.
-- zero means not configured."
-- ::= { aclVlanGroupEntry 5 }
--aclVlanMatchL3v4ProfileNo OBJECT-TYPE
--SYNTAX Integer32 (0..50)
--MAX-ACCESS read-write
--STATUS current
--DESCRIPTION
--"The L3v4 Profile ID which this vlan bind.
--zero means not configured."
--::= { aclVlanGroupEntry 6 }
--aclVlanMatchL3v4ExtProfileNo OBJECT-TYPE
--SYNTAX Integer32 (0..50)
--MAX-ACCESS read-write
--STATUS current
--DESCRIPTION
--"The L3v4 Profile ID which this vlan bind.
--zero means not configured."
--::= { aclVlanGroupEntry 7 }
--aclVlanMatchL3v6ProfileNo OBJECT-TYPE
--SYNTAX Integer32 (0..50)
--MAX-ACCESS read-write
--STATUS current
--DESCRIPTION
--"The L3v6 Profile ID which this vlan bind.
--zero means not configured."
--::= { aclVlanGroupEntry 8 }
--aclVlanMatchL3v6ExtProfileNo OBJECT-TYPE
--SYNTAX Integer32 (0..50)
--MAX-ACCESS read-write
--STATUS current
--DESCRIPTION
-- "The L3v6 Profile ID which this vlan bind.
-- zero means not configured."
--::= { aclVlanGroupEntry 9 }
--aclVlanMatchExpertProfileNo OBJECT-TYPE
--SYNTAX Integer32 (0..50)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The L3v6 Profile ID which this vlan bind.
-- zero means not configured."
-- ::= { aclVlanGroupEntry 10 }
--aclVlanRuleStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-write
--STATUS current
-- DESCRIPTION
-- "This object indicates the status of this entry. An entry is
-- created in this table when this object is SET to 'createAndWait'.
-- The entry in this table is used when the status of this object
-- is SET 'active'. The entry in this table is not used when this
-- object is SET 'notInService'. An entry created in this table is
-- be deleted when this object is SET 'destroy'."
-- ::= { aclVlanGroupEntry 11 }
-- Vlan counter Group
--aclVlanCounterGroup OBJECT IDENTIFIER ::= { aclGroup 10 }
--aclVlanCounterTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AclVlanCounterEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table to control the vlan group binding information of L2 Group,
-- L3v4 Group, and L3v6 Group"
--::= { aclVlanCounterGroup 1 }
--aclVlanCounterEntry OBJECT-TYPE
--SYNTAX AclVlanCounterEntry
--MAX-ACCESS not-accessible
--STATUS current
--DESCRIPTION
-- "An entry appears in this table for each interface in the system.
-- Index to the table is the interface index of the vlan."
--INDEX { aclVlanCounterAccessMapName }
--::= { aclVlanCounterTable 1 }
--AclVlanCounterEntry ::=
-- SEQUENCE {
--aclVlanCounterAccessMapName
-- SnmpAdminString,
-- aclVlanCounterState
-- INTEGER,
-- aclVlanCounterMatchCount
-- Integer32
-- }
--aclVlanCounterAccessMapName OBJECT-TYPE
--SYNTAX SnmpAdminString (SIZE (0..32))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "An administratively assigned string, which may be used
-- to identify the Profile."
-- ::= { aclVlanCounterEntry 1 }
--aclVlanCounterState OBJECT-TYPE
--SYNTAX INTEGER {
-- enabled (1),
-- disabled (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies the action to be taken on the packet if the filter
-- rule matches."
-- DEFVAL { enabled }
-- ::= { aclVlanCounterEntry 2 }
--aclVlanCounterMatchCount OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
--DESCRIPTION
-- "Interface index of the vlan for the configuration
-- in this entry applies."
-- ::= { aclVlanCounterEntry 3 }
-- Vlan Filter Group
-- aclVlanFilterGroup OBJECT IDENTIFIER ::= { aclGroup 11 }
--aclVlanFilterTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AclVlanFilterEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table to control the vlan group binding information of L2 Group,
-- L3v4 Group, and L3v6 Group"
-- ::= { aclVlanFilterGroup 1 }
--aclVlanFilterEntry OBJECT-TYPE
-- SYNTAX AclVlanFilterEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "An entry appears in this table for each interface in the system.
-- Index to the table is the interface index of the vlan."
-- INDEX { aclVlanFilterAccessMapName }
-- ::= { aclVlanFilterTable 1 }
--AclVlanFilterEntry ::=
-- SEQUENCE {
-- aclVlanFilterAccessMapName
-- SnmpAdminString,
-- aclVlanFilterVlanList
-- OCTET STRING
-- }
--aclVlanFilterAccessMapName OBJECT-TYPE
--SYNTAX SnmpAdminString (SIZE (0..32))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "An administratively assigned string, which may be used
-- to identify the Profile."
-- ::= { aclVlanFilterEntry 1 }
--aclVlanFilterVlanList OBJECT-TYPE
--SYNTAX OCTET STRING (SIZE (0..512))
--MAX-ACCESS read-write
--STATUS current
--DESCRIPTION
-- "A string of octets containing one bit per VLAN. The
-- first octet corresponds to VLANs with VlanIndex values
-- 1 through 8; the second octet to VLANs 9 through
-- 16 etc. The most significant bit of each octet
-- corresponds to the lowest VlanIndex value in that octet.
-- The set of vlans configured by management to map for this
-- Instance. If the VlanId to Instance Mapping has to be known
-- then any one of the VlanMapped object should be used.If a
-- vlan is already mapped to this Instance, it may not be mapped
-- again. This object is used only for SET operation.
-- GET Operation returns null values."
--::= { aclVlanFilterEntry 2 }
-- -----------------------------------------------------------------------------
voiceVlanGlobal OBJECT IDENTIFIER ::= { l2VoiceVlanGroup 1 }
voiceVlanMode OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Voice VLAN is a feature that allows you to automatically place
the voice traffic from IP phone to an assigned VLAN to enhance
the VoIP service.
This object is for enabling or disabling Voice Vlan function
in the system.
If the Vlan mode is in Asymmetric VLAN mode, Voice VLAN can not
be enabled."
::= { voiceVlanGlobal 1 }
voiceVlanVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the voice VLAN on a switch.
A value of zero indicates that no voice VLAN has been
configured.
It is required to configure the global voiceVlanVlanId and enable
voiceVlanIfEnabled to start the voice VLAN function
on a port."
DEFVAL { 0 }
::= { voiceVlanGlobal 2 }
voiceVlanQos OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority for the voice VLAN, which is used to distinguish
the QoS of the voice traffic from data traffic."
DEFVAL { 5 }
::= { voiceVlanGlobal 3 }
voiceVlanAgingTime OBJECT-TYPE
SYNTAX INTEGER (1..65535)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aging time for the voice VLAN, for aging out the voice
device and the voice VLAN automatically learned member ports."
DEFVAL { 720 }
::= { voiceVlanGlobal 4 }
voiceVlanOuiTable OBJECT-TYPE
SYNTAX SEQUENCE OF DVoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the voice VLAN OUI configuration."
::= { voiceVlanGlobal 5 }
voiceVlanOuiEntry OBJECT-TYPE
SYNTAX DVoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry indicates an OUI information, which is used to classify
voice traffic into the voice VLAN. If the source MAC addresses of
the received packet matches any of the OUI pattern, the received
packet is determined as voice packet. "
INDEX { voiceVlanOuiAddr,voiceVlanOuiMask }
::= { voiceVlanOuiTable 1 }
DVoiceVlanOuiEntry ::=
SEQUENCE {
voiceVlanOuiAddr MacAddress,
voiceVlanOuiMask MacAddress,
voiceVlanOuiDes SnmpAdminString,
voiceVlanOuiRowStatus RowStatus
}
voiceVlanOuiAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the OUI referring to this VoiceVlanOuiEntry."
::= { voiceVlanOuiEntry 1 }
voiceVlanOuiMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the OUI MAC address matching bitmask."
::= { voiceVlanOuiEntry 2 }
voiceVlanOuiDes OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The description of the OUI. A zero length string of this object indicates
there is no description for this OUI."
::= { voiceVlanOuiEntry 3 }
voiceVlanOuiRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { voiceVlanOuiEntry 4 }
-- -----------------------------------------------------------------------------
voiceVlanInterface OBJECT IDENTIFIER ::= { l2VoiceVlanGroup 2 }
voiceVlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DVoiceVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the interface-specific voice VLAN parameters."
::= { voiceVlanInterface 1 }
voiceVlanInterfaceEntry OBJECT-TYPE
SYNTAX DVoiceVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry indicates the voice VLAN parameters for a port/port-channel."
INDEX { voiceVlanIfIndex }
::= { voiceVlanInterfaceTable 1 }
DVoiceVlanInterfaceEntry ::=
SEQUENCE {
voiceVlanIfIndex InterfaceIndex,
voiceVlanIfEnabled TruthValue,
voiceVlanIfMode INTEGER,
voiceVlanIfState INTEGER
}
voiceVlanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ifIndex of the physical port/port-channel interface."
::= { voiceVlanInterfaceEntry 1 }
voiceVlanIfEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the voice VLAN is enabled at the port."
::= { voiceVlanInterfaceEntry 2 }
voiceVlanIfMode OBJECT-TYPE
SYNTAX INTEGER{
autoUntagged(1),
autoTagged(2),
manual(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If auto learning is enabled, the port will be automatically learned
as voice VLAN member.
When the port is working in auto tagged mode, and the port captures
a voice device through the device's OUI, it will join the voice VLAN
as a tagged member automatically. When the voice device sends tagged
packets, the switch will change its priority. When the voice device
sends untagged packets, it will forward them in port's PVID VLAN.
When the port is working in auto untagged mode, and the port captures
a voice device through the device's OUI, it will join the voice VLAN
as an untagged member automatically. When the voice device sends tagged
packets, the switch will change its priority. When the voice device
sends untagged packets, it will forward them in voice VLAN."
::= { voiceVlanInterfaceEntry 3 }
voiceVlanIfState OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
dynamic(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates Voice vlan state to this Port.
manual - this port is a static member of voice vlan.
dynamic - this port is a dynamic member of voice vlan.
none - this port is not a member of voice vlan."
::= { voiceVlanInterfaceEntry 4 }
-- -----------------------------------------------------------------------------
voiceVlanInfo OBJECT IDENTIFIER ::= { l2VoiceVlanGroup 3 }
voiceVlanDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DVoiceVlanDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the information about the learned voice devices."
::= { voiceVlanInfo 1 }
voiceVlanDeviceEntry OBJECT-TYPE
SYNTAX DVoiceVlanDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the information of the connected voice device."
INDEX {
voiceVlanDevicePortIfindex,
voiceVlanDeviceAddr }
::= { voiceVlanDeviceTable 1 }
DVoiceVlanDeviceEntry ::=
SEQUENCE {
voiceVlanDevicePortIfindex InterfaceIndex,
voiceVlanDeviceAddr MacAddress,
voiceVlanDeviceStartTime DateAndTime,
voiceVlanDeviceStatus INTEGER
}
voiceVlanDevicePortIfindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ifIndex of the port to which the voice device connects."
::= { voiceVlanDeviceEntry 1 }
voiceVlanDeviceAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the MAC address of the voice device."
::= { voiceVlanDeviceEntry 2 }
voiceVlanDeviceStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the start time of the connected voice device."
::= { voiceVlanDeviceEntry 3 }
voiceVlanDeviceStatus OBJECT-TYPE
SYNTAX INTEGER{
active(1),
aging(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the connected voice device."
::= { voiceVlanDeviceEntry 4 }
voiceVlanLldpMedDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DVoiceVlanLldpMedDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the voice devices that are learned through LLDP-MED."
::= { voiceVlanInfo 2 }
voiceVlanLldpMedDeviceEntry OBJECT-TYPE
SYNTAX DVoiceVlanLldpMedDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the information of a voice device learned through
LLDP-MED."
INDEX { voiceVlanLldpMedDeviceIndex }
::= { voiceVlanLldpMedDeviceTable 1 }
DVoiceVlanLldpMedDeviceEntry ::=
SEQUENCE {
voiceVlanLldpMedDeviceIndex Unsigned32,
voiceVlanLldpMedDeviceLocalPort LldpPortNumber,
voiceVlanLldpMedDevChIdSubtype LldpChassisIdSubtype,
voiceVlanLldpMedDevChassisId LldpChassisId,
voiceVlanLldpMedDevPoIdSubtype LldpPortIdSubtype,
voiceVlanLldpMedDevicePortId LldpPortId,
voiceVlanLldpMedDevCreateTime DateAndTime,
voiceVlanLldpMedDevRemainTime Unsigned32
}
voiceVlanLldpMedDeviceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local index used to identify the entry."
::= { voiceVlanLldpMedDeviceEntry 1 }
voiceVlanLldpMedDeviceLocalPort OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the local port number on which the voice
device is learned."
::= { voiceVlanLldpMedDeviceEntry 2 }
voiceVlanLldpMedDevChIdSubtype OBJECT-TYPE
SYNTAX LldpChassisIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of encoding used to identify the chassis associated with
the voice device."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.2.2"
::= { voiceVlanLldpMedDeviceEntry 3 }
voiceVlanLldpMedDevChassisId OBJECT-TYPE
SYNTAX LldpChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the chassis component associated
with the voice device."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.2.3"
::= { voiceVlanLldpMedDeviceEntry 4 }
voiceVlanLldpMedDevPoIdSubtype OBJECT-TYPE
SYNTAX LldpPortIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port identifier encoding used to identify the port component
associated with the voice device."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.3.2"
::= { voiceVlanLldpMedDeviceEntry 5 }
voiceVlanLldpMedDevicePortId OBJECT-TYPE
SYNTAX LldpPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the port component associated with
the voice device."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.3.3"
::= { voiceVlanLldpMedDeviceEntry 6 }
voiceVlanLldpMedDevCreateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The creation time of the voice device."
::= { voiceVlanLldpMedDeviceEntry 7}
voiceVlanLldpMedDevRemainTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Time-To-Live (in seconds) remaining for the voice device.
If the Remain Time decreases to 0, the voice device will be deleted."
::= { voiceVlanLldpMedDeviceEntry 8}
-- -----------------------------------------------------------------------------
autoSurveillanceVlanGlobal OBJECT IDENTIFIER ::= { l2AutoSurveillanceVlanGroup 1 }
autoSurveillanceVlanMode OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally enable or disable auto-surveillance."
::= { autoSurveillanceVlanGlobal 1 }
autoSurveillanceVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the surveillance VLAN on a switch.
A value of zero indicates that no surveillance VLAN has been
configured.
It is required to configure the global autoSurveillanceVlanVlanId and enable
autoSurveillanceVlanIfEnabled to start the surveillance VLAN function
on a port."
DEFVAL { 0 }
::= { autoSurveillanceVlanGlobal 2 }
autoSurveillanceVlanQos OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority for the surveillance VLAN, which is used to distinguish
the QoS of the surveillance traffic from data traffic."
DEFVAL { 5 }
::= { autoSurveillanceVlanGlobal 3 }
autoSurveillanceVlanAgingTime OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aging time for the surveillance VLAN, for aging out the surveillance
device and the surveillance VLAN automatically learned member ports.
"
DEFVAL { 720 }
::= { autoSurveillanceVlanGlobal 4 }
autoSurveillanceVlanOuiTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsvOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of the surveillance VLAN OUI configuration."
::= { autoSurveillanceVlanGlobal 5 }
autoSurveillanceVlanOuiEntry OBJECT-TYPE
SYNTAX DsvOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry indicates an OUI information, which is used to classify
surveillance traffic into the surveillance VLAN. If the source MAC addresses of
the received packet matches any of the OUI pattern, the received
packet is determined as surveillance packet. "
INDEX {
autoSurveillanceVlanOuiAddr,
autoSurveillanceVlanOuiMask
}
::= { autoSurveillanceVlanOuiTable 1 }
DsvOuiEntry ::=
SEQUENCE {
autoSurveillanceVlanOuiAddr MacAddress,
autoSurveillanceVlanOuiMask MacAddress,
autoSurveillanceVlanOuiComponentType OuiComponentType,
autoSurveillanceVlanOuiDescription SnmpAdminString,
autoSurveillanceVlanOuiRowStatus RowStatus
}
autoSurveillanceVlanOuiAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the OUI referring to this entry."
::= { autoSurveillanceVlanOuiEntry 1 }
autoSurveillanceVlanOuiMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the OUI MAC address matching bitmask."
::= { autoSurveillanceVlanOuiEntry 2 }
autoSurveillanceVlanOuiComponentType OBJECT-TYPE
SYNTAX OuiComponentType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Component type of the OUI.
Note: The component type 'dlink' is not allowed to set."
::= { autoSurveillanceVlanOuiEntry 3 }
autoSurveillanceVlanOuiDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of the OUI. A zero length string of this object indicates
there is no description for this OUI."
::= { autoSurveillanceVlanOuiEntry 4 }
autoSurveillanceVlanOuiRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { autoSurveillanceVlanOuiEntry 5 }
-- -----------------------------------------------------------------------------
autoSurveillanceVlanInterface OBJECT IDENTIFIER ::= { l2AutoSurveillanceVlanGroup 2 }
autoSurveillanceVlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsvInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the interface-specific surveillance VLAN parameters."
::= { autoSurveillanceVlanInterface 1 }
autoSurveillanceVlanInterfaceEntry OBJECT-TYPE
SYNTAX DsvInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry indicates the surveillance VLAN parameters for a port/port-channel."
INDEX { autoSurveillanceVlanIfIndex }
::= { autoSurveillanceVlanInterfaceTable 1 }
DsvInterfaceEntry ::=
SEQUENCE {
autoSurveillanceVlanIfIndex InterfaceIndex,
autoSurveillanceVlanIfEnabled TruthValue
}
autoSurveillanceVlanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ifIndex of the physical port/port-channel interface."
::= { autoSurveillanceVlanInterfaceEntry 1 }
autoSurveillanceVlanIfEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the surveillance VLAN is enabled at the port."
::= { autoSurveillanceVlanInterfaceEntry 2 }
-- -----------------------------------------------------------------------------
autoSurveillanceVlanInfo OBJECT IDENTIFIER ::= { l2AutoSurveillanceVlanGroup 3 }
autoSurveillanceVlanDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsvDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the information about the learned surveillance devices."
::= { autoSurveillanceVlanInfo 1 }
autoSurveillanceVlanDeviceEntry OBJECT-TYPE
SYNTAX DsvDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the information of the connected surveillance device."
INDEX {
autoSurveillanceVlanDevicePortIfIdx,
autoSurveillanceVlanDeviceAddr
}
::= { autoSurveillanceVlanDeviceTable 1 }
DsvDeviceEntry ::=
SEQUENCE {
autoSurveillanceVlanDevicePortIfIdx InterfaceIndex,
autoSurveillanceVlanDeviceAddr MacAddress,
autoSurveillanceVlanDeviceCompType OuiComponentType,
autoSurveillanceVlanDeviceDescr SnmpAdminString,
autoSurveillanceVlanDeviceStartTime DateAndTime,
autoSurveillanceVlanDeviceStatus INTEGER
}
autoSurveillanceVlanDevicePortIfIdx OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ifIndex of the port to which the surveillance device connects."
::= { autoSurveillanceVlanDeviceEntry 1 }
autoSurveillanceVlanDeviceAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the MAC address of the surveillance device."
::= { autoSurveillanceVlanDeviceEntry 2 }
autoSurveillanceVlanDeviceCompType OBJECT-TYPE
SYNTAX OuiComponentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The component type of the surveillance device."
::= { autoSurveillanceVlanDeviceEntry 3 }
autoSurveillanceVlanDeviceDescr OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the surveillance device. A zero length string
of this object indicates there is no description for this OUI."
::= { autoSurveillanceVlanDeviceEntry 4 }
autoSurveillanceVlanDeviceStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the start time of the connected surveillance device."
::= { autoSurveillanceVlanDeviceEntry 5 }
autoSurveillanceVlanDeviceStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
aging(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the connected surveillance device."
::= { autoSurveillanceVlanDeviceEntry 6 }
erpsInstance OBJECT IDENTIFIER ::= { l2ErpsGroup 1 }
erpsProfile OBJECT IDENTIFIER ::= { l2ErpsGroup 2 }
-- ----------------------------------------------------------------
-- Erps Instance
-- ----------------------------------------------------------------
erpsInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpsInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ERPS Instance."
::= { erpsInstance 1 }
erpsInstanceEntry OBJECT-TYPE
SYNTAX ErpsInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of snmp view tree entry."
INDEX { erpsInstanceId }
::= { erpsInstanceTable 1 }
ErpsInstanceEntry ::= SEQUENCE
{
erpsInstanceId Integer32,
erpsRingName DisplayString,
erpsPort0 Integer32,
erpsPort1 Integer32,
erpsInstDescription DisplayString,
erpsRapsVlan VlanId,
erpsInclusionVlan VlanList,
erpsInstMel Integer32,
erpsInstProfileName DisplayString,
erpsRplPort Integer32,
erpsRplOwner INTEGER,
erpsInstGuardTimer Unsigned32,
erpsInstHoldOffTimer Unsigned32,
erpsInstWTRTimer Unsigned32,
erpsInstRevertive INTEGER,
erpsInstState INTEGER,
erpsInstAdminRpl INTEGER,
erpsInstOperaRpl INTEGER,
erpsInstPort0State INTEGER,
erpsInstPort1State INTEGER,
erpsInstAdminRplPort Integer32,
erpsInstOperaRplPort Integer32,
erpsInstRowStatus RowStatus
}
erpsInstanceId OBJECT-TYPE
SYNTAX Integer32(1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Instance identifier of ERP instance.
This value must be between 1 and 32."
::= { erpsInstanceEntry 1 }
erpsRingName OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ERP physical ring's name.
This name can be up to 32 characters long."
::= { erpsInstanceEntry 2 }
erpsPort0 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the port interface that
will be the first ring port of the physical ring."
::= { erpsInstanceEntry 3 }
erpsPort1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the port interface that
will be the secont ring port of the physical ring."
::= { erpsInstanceEntry 4 }
erpsInstDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description to the ERP instance.
This description can be up to 64 characters long."
::= { erpsInstanceEntry 5 }
erpsRapsVlan OBJECT-TYPE
SYNTAX VlanId(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the R-APS channel VLAN's ID for
the ERP instance.
The APS channel VLAN of a sub-ring instance is also the virtual
channel of the sub-ring.
This value must be between 1 and 4094."
::= { erpsInstanceEntry 6 }
erpsInclusionVlan OBJECT-TYPE
SYNTAX VlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the protected VLAN of the instance.
A range is identified when a hyphen (-) is used. For example VLANs
1 to 5 can be entered as 1-5. A list is identified when commas (,)
are used. For example, use VLANs 1,3,5.
The VLANs specified here will be protected by the ERP mechanism."
::= { erpsInstanceEntry 7 }
erpsInstMel OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ring MEL value of the ERP instance.
This value must be between 0 and 7. The configured MEL value of
all ring nodes that participate in the same ERP instance should
be identical."
::= { erpsInstanceEntry 8 }
erpsInstProfileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Erps profile name.
This name can be up to 32 characters long.Multiple ERP instances
can be associated with the same G.8032 profile."
::= { erpsInstanceEntry 9 }
erpsRplPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the RPL port of the ring.
When a port is configured as a RPL port, that node becomes RPL
owner for that ring.
Value '0' indicates that none of the ring ports is a RPL port
and hence the node is not a RPL owner."
DEFVAL { 0 }
::= { erpsInstanceEntry 10 }
erpsRplOwner OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether this node is the RPL owner. Options to set
are Enabled and Disabled. When the object is Enabled, it's necessary to set
'erpsRplPort' object to further specify the RPL port."
::= { erpsInstanceEntry 11 }
erpsInstGuardTimer OBJECT-TYPE
SYNTAX Unsigned32(10..2000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the Guard Timer value in the instance.
But it is configured in profile table and associated by profile name."
::= { erpsInstanceEntry 12 }
erpsInstHoldOffTimer OBJECT-TYPE
SYNTAX Unsigned32(0..10000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the Hold Off Timer value in the instance.
But it is configured in profile table and associated by profile name."
::= { erpsInstanceEntry 13 }
erpsInstWTRTimer OBJECT-TYPE
SYNTAX Unsigned32(1..12)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the WTR Timer value in the instance.
But it is configured in profile table and associated by profile name."
::= { erpsInstanceEntry 14 }
erpsInstRevertive OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the revertive value in profile table associated with
the instance."
::= { erpsInstanceEntry 15 }
erpsInstState OBJECT-TYPE
SYNTAX INTEGER{
deactivated(1),
init(2),
idle(3),
protection(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects current ring node status of ERP instance."
::= { erpsInstanceEntry 16 }
erpsInstAdminRpl OBJECT-TYPE
SYNTAX INTEGER{
owner(1),
none(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects current config ring node role of ERPS instance."
::= { erpsInstanceEntry 17 }
erpsInstOperaRpl OBJECT-TYPE
SYNTAX INTEGER{
owner(1),
none(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects running config ring node role of ERPS instance."
::= { erpsInstanceEntry 18 }
erpsInstPort0State OBJECT-TYPE
SYNTAX INTEGER{
forwarding(1),
blocked(2),
signalFailBlocked(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the state for ring port0 of ERP instance."
::= { erpsInstanceEntry 19 }
erpsInstPort1State OBJECT-TYPE
SYNTAX INTEGER{
forwarding(1),
blocked(2),
signalFailBlocked(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the state for ring port1 of ERP instance."
::= { erpsInstanceEntry 20 }
erpsInstAdminRplPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current config RPL."
::= { erpsInstanceEntry 21 }
erpsInstOperaRplPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current running RPL."
::= { erpsInstanceEntry 22 }
erpsInstRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of the ring entry. Entries in this table can be modified
by setting the RowStatus as NOT_IN_SERVICE.
This RowStatus can be made active only if:
- fsErpsRingPort1 for this entry is set to valid interfaceIndex and
- fsErpsRingPort2 for this entry is set to valid interfaceIndex or
is set to zero
- fsErpsRingVlanId for this entry is configured"
::= { erpsInstanceEntry 23 }
-- ----------------------------------------------------------------
-- ERPS Profile Table
-- ----------------------------------------------------------------
erpsProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpsProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to manage the G.8032 profile."
::= { erpsProfile 1 }
erpsProfileEntry OBJECT-TYPE
SYNTAX ErpsProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each profile
in the system."
INDEX { erpsProfileId }
::= { erpsProfileTable 1 }
ErpsProfileEntry ::=
SEQUENCE {
erpsProfileId Integer32,
erpsProfileName DisplayString,
erpsProfileRevertive INTEGER,
erpsProfileGuardTimer Unsigned32,
erpsProfileHoldOffTimer Unsigned32,
erpsProfileWTRTimer Unsigned32,
erpsProfileRowStatus RowStatus
}
erpsProfileId OBJECT-TYPE
SYNTAX Integer32 (1..14)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Erps profile id.
The profile id must be between 1 and 14."
::= { erpsProfileEntry 1 }
erpsProfileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Erps profile name.
This name can be up to 32 characters long.Multiple ERP instances
can be associated with the same G.8032 profile.
By default, the profile name will be constructed by appending profile ID
to the string 'Profile'."
::= { erpsProfileEntry 2 }
erpsProfileRevertive OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object identifies whether the ring is operating in revertive or
nonRevertive manner.
In revertive mode of operation, once the failed link recovers, the data
path will be switched back from protection path to working path.
In nonRevertive mode of operation, once the failed link recovers, one
of the recovered link port will remain in blocked state and the data
still remains in the protection path."
DEFVAL { enable }
::= { erpsProfileEntry 3 }
erpsProfileGuardTimer OBJECT-TYPE
SYNTAX Unsigned32 (10..2000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the period for the guard timer.
This timer is required to prevent reception of outdated R-APS
messages.
Guard timer will be started on reception of local clear SF event.
R-APS messages (except R-APS event messages) received during the running
of the guard timer will be discarded."
DEFVAL { 500 }
::= { erpsProfileEntry 4 }
erpsProfileHoldOffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the period for the hold-off timer.
Hold-Off timer will be started when a new defect (SF) is received for
this ring. This defect will not be given as local SF to ERP control
process until Hold-Off timer expires.
When the Hold-Off timer expires and if a local defect still exists, it
will be given as local SF to the ERPS control process of this ring."
DEFVAL { 0 }
::= { erpsProfileEntry 5 }
erpsProfileWTRTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..12)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the period for the Wait to restore
timer.
This object is applicable, only if this ring is operating in the
revertive mode of operation.
In the revertive mode of operation, if this object is configured with
a value of '0', then the traffic is switched back to the working entity
from the protection entity immediately upon recovery of the working
entity from failure."
DEFVAL { 5 }
::= { erpsProfileEntry 6 }
erpsProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of the profile entry.
Only 'CreateAndWait' and 'destroy' values are allowed for this object.
The profile entry can be applied to an instance only when the profile row status
be set as 'ACTIVE'. "
::= { erpsProfileEntry 7 }
snmpGlobalSettings OBJECT IDENTIFIER ::= { mgtSnmpGroup 1 }
--snmpLinkchangeTrap OBJECT IDENTIFIER ::= { mgtSnmpGroup 2 }
snmpView OBJECT IDENTIFIER ::= { mgtSnmpGroup 3 }
snmpCommunity OBJECT IDENTIFIER ::= { mgtSnmpGroup 4 }
snmpGroup OBJECT IDENTIFIER ::= { mgtSnmpGroup 5 }
snmpUser OBJECT IDENTIFIER ::= { mgtSnmpGroup 7 }
snmpHost OBJECT IDENTIFIER ::= { mgtSnmpGroup 8 }
-- ----------------------------------------------------------------
-- SNMP Global Settings
-- ----------------------------------------------------------------
snmpGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling SNMP Community function."
DEFVAL { enabled }
::= { snmpGlobalSettings 1 }
snmpResBroadReq OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling SNMP Response Broadcast Request."
DEFVAL { disabled }
::= { snmpGlobalSettings 2 }
snmpUDPPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP UDP Port (1-65535)."
::= { snmpGlobalSettings 3 }
snmpTrapSourceInterface OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trap Source Interface."
::= { snmpGlobalSettings 4 }
-- ----------------------------------------------------------------
-- SNMP Trap Settings
-- ----------------------------------------------------------------
snmpTrapGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling SNMP Trap Global State."
DEFVAL { enabled }
::= { snmpGlobalSettings 5 }
snmpTrapSNMPAuthTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling SNMP login fail
event trap in the system."
::= { snmpGlobalSettings 6 }
snmpTrapPortLinkUp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling Port Link Up."
::= { snmpGlobalSettings 7 }
snmpTrapPortLinkDown OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling Port Link Down."
::= { snmpGlobalSettings 8 }
snmpTrapColdstart OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling devie Bootup event
trap in the system."
::= { snmpGlobalSettings 9 }
snmpTrapWarmstart OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling devie bootup event
trap in the system."
::= { snmpGlobalSettings 10 }
-- ----------------------------------------------------------------
-- SNMP Linkchange Trap Settings
-- ----------------------------------------------------------------
-- snmpLinkchangeTrapTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SnmpLinkchangeTrapEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The table of snmp view tree."
-- ::= { snmpLinkchangeTrap 1 }
-- snmpLinkchangeTrapEntry OBJECT-TYPE
-- SYNTAX SnmpLinkchangeTrapEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The list of snmp view tree entry."
-- INDEX { snmpLinkchangeport }
-- ::= { snmpLinkchangeTrapTable 1 }
-- SnmpLinkchangeTrapEntry ::= SEQUENCE
-- {
-- snmpLinkchangeport Integer32,
-- snmpLinkchangeTrapSending INTEGER,
-- snmpLinkchangeTrapState INTEGER
-- }
-- snmpLinkchangeport OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "SNMP Linkchange Trap Settings."
-- ::= { snmpLinkchangeTrapEntry 1 }
-- snmpLinkchangeTrapSending OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "SNMP Linkchange Trap Settings Trap Sending."
-- ::= { snmpLinkchangeTrapEntry 2 }
-- snmpLinkchangeTrapState OBJECT-TYPE
-- SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "SNMP Linkchange Trap Settings Trap State."
-- ::= { snmpLinkchangeTrapEntry 3 }
-- ----------------------------------------------------------------
-- SNMP View Table Settings
-- ----------------------------------------------------------------
snmpViewTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of snmp view tree."
::= { snmpView 1 }
snmpViewEntry OBJECT-TYPE
SYNTAX SnmpViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of snmp view tree entry."
INDEX { snmpViewName ,snmpViewSubtree }
::= { snmpViewTable 1 }
SnmpViewEntry ::= SEQUENCE
{
snmpViewName SnmpAdminString,
snmpViewSubtree OBJECT IDENTIFIER,
snmpViewType INTEGER,
snmpViewStatus RowStatus
}
snmpViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The human readable name for a family of view subtrees.
"
::= { snmpViewEntry 1 }
snmpViewSubtree OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MIB subtree which when combined with the
corresponding instance of vacmViewFamilyMask
defines a family of view subtrees.
"
::= { snmpViewEntry 2 }
snmpViewType OBJECT-TYPE
SYNTAX INTEGER {
included(1),
excluded(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether the corresponding instances of
vacmViewFamilySubtree and vacmViewFamilyMask
define a family of view subtrees which is included in
or excluded from the MIB view.
"
DEFVAL { included }
::= { snmpViewEntry 3 }
snmpViewStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.
"
::= { snmpViewEntry 4 }
-- ----------------------------------------------------------------
-- The sysSNMPCommunity group
-- ----------------------------------------------------------------
snmpCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of snmp community."
::= { snmpCommunity 1 }
snmpCommunityEntry OBJECT-TYPE
SYNTAX SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of snmp community entry."
INDEX { snmpCommName }
::= { snmpCommunityTable 1 }
SnmpCommunityEntry ::= SEQUENCE
{
snmpCommName SnmpAdminString,
snmpCommKeyType INTEGER,
snmpCommViewName SnmpAdminString,
snmpCommAccessRight INTEGER,
snmpCommIPAccListName SnmpAdminString,
snmpCommStatus RowStatus
}
snmpCommName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique index value of a row in this table."
::= { snmpCommunityEntry 1 }
snmpCommKeyType OBJECT-TYPE
SYNTAX INTEGER {
plainText(1),
encrypted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key Type."
::= { snmpCommunityEntry 2 }
snmpCommViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP Community Settings View Name."
::= { snmpCommunityEntry 3 }
snmpCommAccessRight OBJECT-TYPE
SYNTAX INTEGER {
readOnly(1),
readWrite(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP Community Settings Key Type."
::= { snmpCommunityEntry 4 }
snmpCommIPAccListName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP Community Settings IP Access-List Name."
::= { snmpCommunityEntry 5 }
snmpCommStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row in the
snmpCommunityTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The snmpCommunityName and
snmpCommunitySecurityName objects must be explicitly set.
There is no restriction on setting columns in this table
when the value of snmpCommunityStatus is active(1)."
::= { snmpCommunityEntry 6 }
-- ----------------------------------------------------------------
-- The sysSNMPGroup group
-- ----------------------------------------------------------------
snmpGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of snmp group."
::= { snmpGroup 1 }
snmpGroupEntry OBJECT-TYPE
SYNTAX SnmpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The list of snmp group entry."
INDEX { snmpGroupName ,snmpGroupSecurityModel ,snmpGroupSecurityLevel}
::= { snmpGroupTable 1 }
SnmpGroupEntry ::= SEQUENCE {
snmpGroupName SnmpAdminString,
snmpGroupSecurityModel INTEGER,
snmpGroupSecurityLevel INTEGER,
snmpGroupReadViewName SnmpAdminString,
snmpGroupWriteViewName SnmpAdminString,
snmpGroupNotifyViewName SnmpAdminString,
snmpGroupIpListName SnmpAdminString,
snmpGroupStatus RowStatus
}
snmpGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.
"
::= { snmpGroupEntry 1 }
snmpGroupSecurityModel OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In order to gain the access rights allowed by this
conceptual row, this securityModel must be in use.
"
::= { snmpGroupEntry 2 }
snmpGroupSecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
noAuthNoPriv (1),
authNoPriv (2),
authPriv (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum level of security required in order to
gain the access rights allowed by this conceptual
row. A securityLevel of noAuthNoPriv is less than
authNoPriv which in turn is less than authPriv.
If multiple entries are equally indexed except for
this vacmAccessSecurityLevel index, then the entry
which has the highest value for
vacmAccessSecurityLevel is selected.
"
::= { snmpGroupEntry 3 }
snmpGroupReadViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes read access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpGroupEntry 4 }
snmpGroupWriteViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes write access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpGroupEntry 5 }
snmpGroupNotifyViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes access for notifications.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpGroupEntry 6 }
snmpGroupIpListName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP Group Settings IP Address-List Name.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpGroupEntry 7 }
snmpGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.
"
::= { snmpGroupEntry 8 }
-- ----------------------------------------------------------------
-- SNMP Engine ID Local Settings
-- ----------------------------------------------------------------
snmpEngineID OBJECT-TYPE
SYNTAX SnmpEngineID
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP Engine ID Local Settings.
"
::= { mgtSnmpGroup 6 }
-- ----------------------------------------------------------------
-- SNMP User Table Settings
-- ----------------------------------------------------------------
snmpUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of snmp user."
::= { snmpUser 1 }
snmpUserEntry OBJECT-TYPE
SYNTAX SnmpUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of snmp user entry."
INDEX { snmpUserName , snmpUserVersion}
::= { snmpUserTable 1 }
SnmpUserEntry ::= SEQUENCE {
snmpUserName SnmpAdminString,
snmpUserVersion INTEGER,
snmpUserGroupName SnmpAdminString,
snmpUserV3Encrypt INTEGER,
snmpUserAuthProtocol INTEGER,
snmpUserAuthProtocolPassword SnmpAdminString,
snmpUserPrivProtocol INTEGER,
snmpUserPrivProtocolPassword SnmpAdminString,
snmpUserAuthProtoByKey INTEGER,
snmpUserAuthProtoKey SnmpAdminString,
snmpUserPrivProtoByKey INTEGER,
snmpUserPrivProtoKey SnmpAdminString,
snmpUserIpListName SnmpAdminString,
snmpUserStatus RowStatus
}
snmpUserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID."
::= { snmpUserEntry 1 }
snmpUserVersion OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID."
DEFVAL { v1 }
::= { snmpUserEntry 2 }
snmpUserGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.
"
::= { snmpUserEntry 3 }
snmpUserV3Encrypt OBJECT-TYPE
SYNTAX INTEGER {
none (0),
password (1),
key (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID."
DEFVAL { none }
::= { snmpUserEntry 4 }
snmpUserAuthProtocol OBJECT-TYPE
SYNTAX INTEGER {
none (1),
md5 (2),
sha (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be authenticated, and if so,
the type of authentication protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
UserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoAuthProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoAuthProtocol, then an 'inconsistentValue'
error must be returned.
If a set operation tries to set the value to the
NoAuthProtocol while the UserPrivProtocol value
in the same row is not equal to NoPrivProtocol,
then an 'inconsistentValue' error must be returned.
That means that an SNMP command generator application
must first ensure that the UserPrivProtocol is set
to the NoPrivProtocol value before it can set
the UserAuthProtocol value to NoAuthProtocol.
"
::= { snmpUserEntry 5 }
snmpUserAuthProtocolPassword OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Password of snmp user auth protocol."
::= { snmpUserEntry 6 }
snmpUserPrivProtocol OBJECT-TYPE
SYNTAX INTEGER {
none (1),
des (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be protected from disclosure,
and if so, the type of privacy protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
usmUserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoPrivProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoPrivProtocol, then an 'inconsistentValue'
error must be returned.
Note that if any privacy protocol is used, then you
must also use an authentication protocol. In other
words, if usmUserPrivProtocol is set to anything else
than NoPrivProtocol, then the corresponding instance
of usmUserAuthProtocol cannot have a value of
usmNoAuthProtocol. If it does, then an
'inconsistentValue' error must be returned.
"
DEFVAL { none }
::= { snmpUserEntry 7 }
snmpUserPrivProtocolPassword OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Password of snmp user priv protocol."
::= { snmpUserEntry 8 }
snmpUserAuthProtoByKey OBJECT-TYPE
SYNTAX INTEGER {
none (1),
md5 (2),
sha (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Auth-Protocol by Key."
::= { snmpUserEntry 9 }
snmpUserAuthProtoKey OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key of snmp user auth protocol by Key."
::= { snmpUserEntry 10 }
snmpUserPrivProtoByKey OBJECT-TYPE
SYNTAX INTEGER {
none (1),
des (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priv-Protocol by Key."
::= { snmpUserEntry 11 }
snmpUserPrivProtoKey OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key of snmp user Priv protocol by Key."
::= { snmpUserEntry 12 }
snmpUserIpListName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP User Settings IP Address-List Name."
::= { snmpUserEntry 13 }
snmpUserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of this conceptual row.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
In particular, a newly created row for a user who
employs authentication, cannot be made active until the
corresponding usmUserCloneFrom and usmUserAuthKeyChange
have been set.
Further, a newly created row for a user who also
employs privacy, cannot be made active until the
usmUserPrivKeyChange has been set.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified,
except for usmUserOwnAuthKeyChange and
usmUserOwnPrivKeyChange. For these 2 objects, the
value of usmUserStatus MUST be active.
"
::= { snmpUserEntry 14 }
-- ----------------------------------------------------------------
-- SNMP Host Table Settings
-- ----------------------------------------------------------------
snmpHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of snmp host."
::= { snmpHost 1 }
snmpHostEntry OBJECT-TYPE
SYNTAX SnmpHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of snmp host entry."
INDEX { snmpHostAddress, snmpHostIPType}
::= { snmpHostTable 1 }
SnmpHostEntry ::= SEQUENCE
{
snmpHostAddress InetAddress,
snmpHostIPType INTEGER,
snmpHostVersion INTEGER,
snmpHostUDPPort Integer32,
snmpHostCommunityName SnmpAdminString,
snmpHostStatus RowStatus
}
snmpHostAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object. And this object is unique
identifier associated with this snmpNotifyEntry."
::= { snmpHostEntry 1 }
snmpHostIPType OBJECT-TYPE
SYNTAX INTEGER {
iPv4 (1),
iPv6 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of IP interface."
::= { snmpHostEntry 2 }
snmpHostVersion OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
noAuthNoPriv (3),
authNoPriv (4),
authPriv (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Level of Security to be used when generating
SNMP messages using this entry."
::= { snmpHostEntry 3 }
snmpHostUDPPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP UDP Port (1-65535)."
::= { snmpHostEntry 4 }
snmpHostCommunityName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The locally arbitrary."
::= { snmpHostEntry 5 }
snmpHostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row in the
snmpHostTable."
::= { snmpHostEntry 6 }
-- *****************************************************************
--
-- Enterprise Trap group
--
-- *****************************************************************
END
View Git Blame Copy Permalink