1300 lines
54 KiB
Plaintext
1300 lines
54 KiB
Plaintext
-- The DHS3226 proprietary MIB Ver 1.7 2002/06/05
|
|
|
|
DHS3226-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress , TimeTicks , Integer32,
|
|
MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI
|
|
DisplayString FROM SNMPv2-TC
|
|
PortList FROM Q-BRIDGE-MIB
|
|
dlink-mgmt FROM DLINK-ID-REC-MIB
|
|
dlink-Dhs3226Prod FROM DLINK-ID-REC-MIB;
|
|
|
|
swL2MgmtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "0007150000Z"
|
|
ORGANIZATION "D-Link, Inc."
|
|
CONTACT-INFO
|
|
" D-Link Customer Service
|
|
|
|
Postal: No. 20,Park Ave, II, Science-based
|
|
Industrial Park, Hsinchu, taiwan, R.O.C.
|
|
|
|
Tel: 886-3-577-9966
|
|
|
|
E-mail: "
|
|
DESCRIPTION
|
|
"The Structure of Layer 2 Network Management Information for the
|
|
D-Link enterprise."
|
|
::= { dlink-mgmt dhs3226(36) 2}
|
|
|
|
VlanId ::= INTEGER (1..4094)
|
|
|
|
swL2Property OBJECT IDENTIFIER ::= { dlink-Dhs3226Prod 1 }
|
|
swL2Module OBJECT IDENTIFIER ::= { swL2Property 1 }
|
|
|
|
swL2BwMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
|
|
swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
|
|
swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
|
|
swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
|
|
swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
|
|
swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
|
|
swL2PortMirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2BwMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
|
|
-- ********************************************************************
|
|
|
|
swL2BwMgmtFEPortUnitBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the represented bandwidth for each unit if the counting type
|
|
is for Fast Ethernet ports."
|
|
::= { swL2BwMgmt 1 }
|
|
|
|
swL2BwMgmtGEPortUnitBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the represented bandwidth for each unit if the counting type
|
|
is for Gigabit Ethernet ports."
|
|
::= { swL2BwMgmt 2 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2IngrPortBwControl OBJECT IDENTIFIER ::= { swL2BwMgmt 3 }
|
|
|
|
swL2IngrPortBwCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IngrPortBwCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the current control information about the ingress
|
|
bandwidth of port"
|
|
::= { swL2IngrPortBwControl 3 }
|
|
|
|
swL2IngrPortBwCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2IngrPortBwCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2IngrPortBwCtrlTable."
|
|
INDEX { swL2IngrPortBwCtrlPort }
|
|
::= { swL2IngrPortBwCtrlTable 1 }
|
|
|
|
SwL2IngrPortBwCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2IngrPortBwCtrlPort
|
|
INTEGER,
|
|
swL2IngrPortBwCtrlPortCountType
|
|
INTEGER,
|
|
swL2IngrPortBwCtrlPortNwayStatus
|
|
INTEGER,
|
|
swL2IngrPortBwCtrlUnit
|
|
INTEGER,
|
|
swL2IngrPortBwCtrlRate
|
|
INTEGER,
|
|
swL2IngrPortBwCtrlStatus
|
|
INTEGER
|
|
}
|
|
|
|
swL2IngrPortBwCtrlPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port to limit ingress bandwidth."
|
|
::= { swL2IngrPortBwCtrlEntry 1 }
|
|
|
|
swL2IngrPortBwCtrlPortCountType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fastEthernetPort(1),
|
|
gigabitEthernetPort(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the counting type of port. All the regular ports have
|
|
the type fastEthernetPort, and the others have the type
|
|
gigabitEthernetPort. If counting type is fastEthernetPort, the
|
|
limited bandwidth will be that swL2IngrPortBwCtrlUnit times
|
|
swL2BwMgmtFEPortUnitBandwidth. If counting type is
|
|
gigabitEthernetPort, the limited bandwidth will be that
|
|
swL2IngrPortBwCtrlUnit times swL2BwMgmtGEPortUnitBandwidth."
|
|
::= { swL2IngrPortBwCtrlEntry 2 }
|
|
|
|
swL2IngrPortBwCtrlPortNwayStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
half-10Mbps(2),
|
|
full-10Mbps(3),
|
|
half-100Mbps(4),
|
|
full-100Mbps(5),
|
|
half-1Gigabps(6),
|
|
full-1Gigabps(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates speed and duplex mode of port."
|
|
::= { swL2IngrPortBwCtrlEntry 3 }
|
|
|
|
swL2IngrPortBwCtrlUnit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current units for the limitation of ingress bandwidth
|
|
of port."
|
|
::= { swL2IngrPortBwCtrlEntry 4 }
|
|
|
|
swL2IngrPortBwCtrlRate OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the limitation of forwarding bandwidth in kilobyte. The value
|
|
should be that swL2IngrPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth,
|
|
if counting type is fastEthernetPort, or swL2BwMgmtGEPortUnitBandwidth, if
|
|
counting type is gigabitEthernetPort."
|
|
::= { swL2IngrPortBwCtrlEntry 5 }
|
|
|
|
swL2IngrPortBwCtrlStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of this entry. All the existed entries will return enabled(3). An entry
|
|
will be created if this object is set to enabled(3) and not existed.
|
|
If this object is set to disabled(2), this entry will be deleted."
|
|
::= { swL2IngrPortBwCtrlEntry 6 }
|
|
|
|
-- *******************************************************
|
|
|
|
|
|
swL2EgressPortBwControl OBJECT IDENTIFIER ::= { swL2BwMgmt 4 }
|
|
|
|
swL2EgressPortBwCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2EgressPortBwCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the current control information about the egress
|
|
bandwidth of port"
|
|
::= { swL2EgressPortBwControl 3 }
|
|
|
|
swL2EgressPortBwCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2EgressPortBwCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2EgressPortBwCtrlTable."
|
|
INDEX { swL2EgressPortBwCtrlPort }
|
|
::= { swL2EgressPortBwCtrlTable 1 }
|
|
|
|
SwL2EgressPortBwCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2EgressPortBwCtrlPort
|
|
INTEGER,
|
|
swL2EgressPortBwCtrlPortCountType
|
|
INTEGER,
|
|
swL2EgressPortBwCtrlPortNwayStatus
|
|
INTEGER,
|
|
swL2EgressPortBwCtrlUnit
|
|
INTEGER,
|
|
swL2EgressPortBwCtrlRate
|
|
INTEGER,
|
|
swL2EgressPortBwCtrlStatus
|
|
INTEGER
|
|
}
|
|
|
|
swL2EgressPortBwCtrlPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port to limit egress bandwidth."
|
|
::= { swL2EgressPortBwCtrlEntry 1 }
|
|
|
|
swL2EgressPortBwCtrlPortCountType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fastEthernetPort(1),
|
|
gigabitEthernetPort(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the counting type of port. All the regular ports have
|
|
the type fastEthernetPort, and the others have the type
|
|
gigabitEthernetPort. If counting type is fastEthernetPort, the
|
|
limited bandwidth will be that swL2EgressPortBwCtrlUnit times
|
|
swL2BwMgmtFEPortUnitBandwidth. If counting type is
|
|
gigabitEthernetPort, the limited bandwidth will be that
|
|
swL2EgressPortBwCtrlUnit times swL2BwMgmtGEPortUnitBandwidth."
|
|
::= { swL2EgressPortBwCtrlEntry 2 }
|
|
|
|
swL2EgressPortBwCtrlPortNwayStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
half-10Mbps(2),
|
|
full-10Mbps(3),
|
|
half-100Mbps(4),
|
|
full-100Mbps(5),
|
|
half-1Gigabps(6),
|
|
full-1Gigabps(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates speed and duplex mode of port."
|
|
::= { swL2EgressPortBwCtrlEntry 3 }
|
|
|
|
swL2EgressPortBwCtrlUnit OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current units for the limitation of egress bandwidth
|
|
of port."
|
|
::= { swL2EgressPortBwCtrlEntry 4 }
|
|
|
|
swL2EgressPortBwCtrlRate OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the limitation of forwarding bandwidth in kilobyte. The value
|
|
should be that swL2EgressPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth,
|
|
if counting type is fastEthernetPort, or swL2BwMgmtGEPortUnitBandwidth,
|
|
if counting type is gigabitEthernetPort."
|
|
::= { swL2EgressPortBwCtrlEntry 5 }
|
|
|
|
swL2EgressPortBwCtrlStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of this entry. All the existed entries will return enabled(3). An
|
|
entry will be created if this object is set to enabled(3) and not existed.
|
|
If this object is set to disabled(2), this entry will be deleted."
|
|
::= { swL2EgressPortBwCtrlEntry 6 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2GrpAddrFltrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
forwardAllGrpAddr(2),
|
|
forwardAllUnregGrpAddr(3),
|
|
filterAllUnregGrpAddr(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the filtering mode for all ports.
|
|
In forwardAllGrpAddr(2) mode - forward all group address,
|
|
all frames destined for group MAC addresses are forwarded according
|
|
to the VLAN rules.
|
|
In forwardAllUnregGrpAddr(3) mode - forward all unregistered group addresses,
|
|
if the Group MAC Address Registration entries exist in the Multicast Table,
|
|
frames destined for the corresponding group MAC addresses will be forwarded,
|
|
only on ports identified in the member port set, which is identified by the
|
|
Port Bitmap. The Untagged Bitmap is also used to send tagged packets on the
|
|
member ports. On the other hand, if the Group MAC Address does not exist in
|
|
the Multicast Table, the filtering mechanism of forwardAllGrpAddr(2) mode is
|
|
used.
|
|
In filterAllUnregGrpAddr(4) mode - filter all unregistered group addresses,
|
|
frames destined for group MAC addresses are forwarded only if such forwarding
|
|
is explicity permitted by a Group Address entry in the Multicast Table. In
|
|
other words, if the Group MAC Address exists in the Multicast table, then the
|
|
packets are forwarded using the Port Bitmap and the Untagged Bitmap from
|
|
that entry. Otherwise, the packets are dropped."
|
|
::= { swL2MgmtMIB 2 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
|
|
-- ********************************************************************
|
|
|
|
swL2CosScheduleMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
strict(2),
|
|
roundRobin(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the scheduling mechanism for CoS queues.
|
|
In strict(2) mode - packet process will start from highest CoS queue for a given
|
|
port, then moves on to the next lower CoS queue while the
|
|
higher CoS queue is empty packet.
|
|
In roundRobin(3) mode - packet process will start from highest CoS queue for a given
|
|
port, then moves on to the next lower CoS queue after sending
|
|
swL2CosMaxPackets or when the higher CoS queue is empty packet."
|
|
::= { swL2CosMgmt 1 }
|
|
|
|
swL2CosControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2CosControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { swL2CosMgmt 2 }
|
|
|
|
swL2CosControlEntry OBJECT-TYPE
|
|
SYNTAX SwL2CosControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2CosControlTable."
|
|
INDEX { swL2CosQueueIndex }
|
|
::= { swL2CosControlTable 1 }
|
|
|
|
SwL2CosControlEntry ::=
|
|
SEQUENCE {
|
|
swL2CosQueueIndex
|
|
INTEGER,
|
|
swL2CosMaxPackets
|
|
INTEGER,
|
|
swL2CosMaxLatency
|
|
INTEGER
|
|
}
|
|
|
|
swL2CosQueueIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates CoS Queue."
|
|
::= { swL2CosControlEntry 1 }
|
|
|
|
swL2CosMaxPackets OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates maximum packet count for a CoS Queue. This object only takes effect at
|
|
roundRobin mode of swL2CosScheduleMethod."
|
|
::= { swL2CosControlEntry 2 }
|
|
|
|
swL2CosMaxLatency OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates maximum allowable latency for packet transmission on a CoS Queue such
|
|
that the packets on this queue are not delayed more than the maximum allowable
|
|
latency time. The granularity of this timer is 17 microsecond. A value of 0x00
|
|
disable this timer. swL2CosMaxLatency takes precedence over swL2CosScheduleMethod."
|
|
::= { swL2CosControlEntry 3 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
|
|
-- ********************************************************************
|
|
|
|
swL2PortSecurityControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port security feature which controls the address leaning capability and the
|
|
traffic forwarding decision. Each port can have this function enabled or disabled.
|
|
When it is enabled and a number is given said N, which allows N addresses to be
|
|
learned at this port, the first N learned addresses are locked at this port as
|
|
static entry. When the learned addresses number reach N, any coming packet with
|
|
not learned source addresses are discarded (e.g. dropped) and no more new addresses
|
|
can be learned at this port."
|
|
::= { swL2PortSecurityMgmt 1 }
|
|
|
|
swL2PortSecurityControlEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortSecurityControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2PortSecurityControlTable."
|
|
INDEX { swL2PortSecurityPortIndex }
|
|
::= { swL2PortSecurityControlTable 1 }
|
|
|
|
SwL2PortSecurityControlEntry ::=
|
|
SEQUENCE {
|
|
swL2PortSecurityPortIndex
|
|
INTEGER,
|
|
swL2PortSecurityMaxLernAddr
|
|
INTEGER,
|
|
swL2PortSecurityMode
|
|
INTEGER,
|
|
swL2PortSecurityAdmState
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortSecurityPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the secured port to lock address learning."
|
|
::= { swL2PortSecurityControlEntry 1 }
|
|
|
|
swL2PortSecurityMaxLernAddr OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates allowable number of addresses to be learned at this port."
|
|
::= { swL2PortSecurityControlEntry 2 }
|
|
|
|
swL2PortSecurityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
deleteOnTimeout(2),
|
|
deleteOnReset(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode of locking address.
|
|
In deleteOnTimeout(2) mode - the locked addresses can be aged out after aging timer
|
|
expire. In this mode, when the locked address is aged
|
|
out, the number of address can be learned has to be
|
|
increased by one.
|
|
In deleteOnReset(3) mode - never age out the locked addresses unless restart
|
|
the system to prevent from port movement or intrusion."
|
|
::= { swL2PortSecurityControlEntry 3 }
|
|
|
|
swL2PortSecurityAdmState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates administration state of locking address."
|
|
::= { swL2PortSecurityControlEntry 4 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
|
|
-- ********************************************************************
|
|
|
|
swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 }
|
|
|
|
swL2DevInfoSystemUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time the switch entered its
|
|
current operational state. If the current state was entered
|
|
prior to the last re-initialization, then this object contains
|
|
a zero value. This value is in units of seconds."
|
|
::= { swL2DevInfo 1 }
|
|
|
|
swL2DevInfoTotalNumOfPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports within this switch. This value is the sum
|
|
of the ports within this switch."
|
|
::= { swL2DevInfo 2 }
|
|
|
|
swL2DevInfoNumOfPortInUse OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports in this switch connected to the segment or
|
|
the end stations."
|
|
::= { swL2DevInfo 3 }
|
|
|
|
swL2DevInfoConsoleInUse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
in-use(2),
|
|
not-in-use(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This usage indication of console system."
|
|
::= { swL2DevInfo 4 }
|
|
|
|
swL2DevInfoFrontPanelLedStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a set of system LED indications. The first third octets
|
|
is defined as system LED . The first LED is power LED . The second LED
|
|
is console LED . The third LED is RPS (Redundancy Power Supply) LED .
|
|
. The other octets following the third octets are the logical port LED
|
|
(following dot1dBasePort ordering) . Every two bytes are presented to a
|
|
port. The first byte is presentd to the Link/Activity LED . The second
|
|
byte is presented to the Speed LED .
|
|
|
|
There is one byte per LED .
|
|
|
|
The most significant bit is used for blink/solid:
|
|
Off = The LED is lit permanently.
|
|
On = The LED blinks.
|
|
|
|
The three least significant bits are used for color:
|
|
1 = not lit,
|
|
2 = green,
|
|
3 = yellow,(orange)
|
|
4 = blue,
|
|
5 = red,
|
|
0+6+7 not used
|
|
|
|
The four remaining bits are currently unused and must be 0 ."
|
|
::= { swL2DevInfo 5 }
|
|
|
|
swL2DevInfoCpuUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
UNITS "%"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates CPU utilization"
|
|
::= { swL2DevInfo 6 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 }
|
|
|
|
swL2DevCtrlSystemReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reboot(2),
|
|
save-config-and-reboot(3),
|
|
reboot-and-load-factory-default-config(4),
|
|
reboot-and-load-factory-default-config-except-ip-address(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the agent system reboot state. The agent always
|
|
returns other(1) when this object is read."
|
|
::= { swL2DevCtrl 1 }
|
|
|
|
swL2DevCtrlSystemIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates system ip."
|
|
::= { swL2DevCtrl 2 }
|
|
|
|
swL2DevCtrlSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates system subnet mask."
|
|
::= { swL2DevCtrl 3 }
|
|
|
|
swL2DevCtrlDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates system default gateway."
|
|
::= { swL2DevCtrl 4 }
|
|
|
|
swL2DevCtrlManagementVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls which Vlan includes system ip. And the Vlan
|
|
should have been created."
|
|
::= { swL2DevCtrl 5 }
|
|
|
|
swL2DevCtrlStpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can be enabled or disabled spanning tree algorithm
|
|
during runtime of the system."
|
|
::= { swL2DevCtrl 6 }
|
|
|
|
swL2DevCtrlIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates layer 2 Internet Group Management Protocol
|
|
(IGMP) capture function is enabled or disabled ."
|
|
::= { swL2DevCtrl 7 }
|
|
|
|
swL2DevCtrlBcastStormCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates broadcast storm control function is enabled or
|
|
disabled. The swL2PortCtrlBMDStormLimit object will descript the
|
|
detail about the storm control ."
|
|
::= { swL2DevCtrl 8 }
|
|
|
|
swL2DevCtrlMcastStormCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates multicast storm control function is enabled or
|
|
disabled. The swL2PortCtrlBMDStormLimit object will descript the
|
|
detail about the storm control ."
|
|
::= { swL2DevCtrl 9 }
|
|
|
|
swL2DevCtrlDestLookupFailureCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates destination lookup failure rate control function
|
|
is enabled or disabled. The swL2PortCtrlBMDStormLimit object will
|
|
descript the detail about the storm control ."
|
|
::= { swL2DevCtrl 10 }
|
|
|
|
swL2DevCtrlBMDStormLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..262143)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object to decide how many broadcast/multicast (depend on
|
|
swL2DevCtrlBcastStormCtrl, swL2DevCtrlMcastStormCtrl or
|
|
swL2DevCtrlDestLookupFailureCtrlobjects whether is enabled) packets per second
|
|
will pass thru. Beyond the limit, the device will start dropping
|
|
that type of packet until the second interval has expired . Once the time
|
|
interval has expired , the device will start forwarding that type of packet."
|
|
::= { swL2DevCtrl 11 }
|
|
|
|
swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"As the object is set to active, all the statistic counters will be cleared.
|
|
If set to normal, do nothing."
|
|
::= { swL2DevCtrl 12 }
|
|
|
|
swL2DevCtrlSnmpEnableAuthenTraps OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP entity is permitted to generate
|
|
authenticationFailure traps. The value of this object
|
|
overrides any configuration information; as such, it
|
|
provides a means whereby all authenticationFailure traps may
|
|
be disabled.
|
|
|
|
Note that it is strongly recommended that this object be
|
|
stored in non-volatile memory so that it remains constant
|
|
across re-initializations of the network management system."
|
|
::= { swL2DevCtrl 13 }
|
|
|
|
swL2DevCtrlFilterEAPOLPDU OBJECT-TYPE
|
|
SYNTAX INTEGER { yes(1), no(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether to filter the EAPOL PDU. If the administrative
|
|
state for Port Access Control in a System is enabled, this object
|
|
is meaningless. Otherwise, when this object is yes(1), the EAPOL
|
|
packets will be dropped. When this object is no(2), the EAPOL
|
|
packets will pass."
|
|
::= { swL2DevCtrl 14 }
|
|
|
|
swL2DevCtrlTrafficSegmentation OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this object is disabled(2), then no traffic segmentation.
|
|
|
|
When we set it to enabled(1), there are three conditions for the
|
|
traffic segmentation.
|
|
(1) If without plugging in option module, port 1 is the server port.
|
|
(2) If plugging in one-port module, the port on the module is the
|
|
server port.
|
|
(3) If plugging in two-port module, these two ports on the module are
|
|
the server ports.
|
|
|
|
Under this situation, other ports(Client ports) can only communicate
|
|
with the server port. Client ports can't communicate with each other."
|
|
::= { swL2DevCtrl 15 }
|
|
|
|
-- ************************
|
|
-- pingTest *
|
|
-- ************************
|
|
|
|
agentPingTest OBJECT IDENTIFIER ::= { swL2DevCtrl 16 }
|
|
|
|
agentPingTestIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The target ip address of the ping test "
|
|
::= { agentPingTest 1 }
|
|
|
|
agentPingTestRepetition OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The repetition times of the ping test "
|
|
::= { agentPingTest 2 }
|
|
|
|
agentPingTestControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stop(0),
|
|
active(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" To control the device to start ping or stop ping"
|
|
::= { agentPingTest 3 }
|
|
|
|
agentPingTestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
finish(0),
|
|
proceeding(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The state of the ping test, proceeding means the ping test is going on,
|
|
and finish means the ping test is finished"
|
|
::= { agentPingTest 4 }
|
|
|
|
agentPingTestSuccessCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The success times of the ping test."
|
|
::= { agentPingTest 5 }
|
|
|
|
agentPingTestFailCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The fail times of the ping test."
|
|
::= { agentPingTest 6 }
|
|
|
|
swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ;
|
|
The default value is DEFAULT_VLAN_ID of system ."
|
|
::= { swL2DevCtrl 17 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
|
|
-- ********************************************************************
|
|
|
|
swL2PortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every port."
|
|
::= { swL2PortMgmt 1 }
|
|
|
|
swL2PortInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each port of the device."
|
|
INDEX { swL2PortInfoPortIndex }
|
|
::= { swL2PortInfoTable 1 }
|
|
|
|
SwL2PortInfoEntry ::=
|
|
SEQUENCE {
|
|
swL2PortInfoPortIndex
|
|
INTEGER,
|
|
swL2PortInfoType
|
|
INTEGER,
|
|
swL2PortInfoDescr
|
|
DisplayString,
|
|
swL2PortInfoLinkStatus
|
|
INTEGER,
|
|
swL2PortInfoNwayStatus
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port number in
|
|
the module)"
|
|
::= { swL2PortInfoEntry 1 }
|
|
|
|
swL2PortInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
portType-UTP(2),
|
|
portType-AUI(3),
|
|
portType-Fiber-MTRJ(4),
|
|
portType-Fiber-SC(5),
|
|
portType-Fiber-GBIC(6),
|
|
portType-BNC(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the connector type of this port."
|
|
::= { swL2PortInfoEntry 2 }
|
|
|
|
swL2PortInfoDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides port type information in displayed string format"
|
|
::= { swL2PortInfoEntry 3 }
|
|
|
|
swL2PortInfoLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
link-pass(2),
|
|
link-fail(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port link status."
|
|
::= { swL2PortInfoEntry 4 }
|
|
|
|
swL2PortInfoNwayStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
half-10Mbps(2),
|
|
full-10Mbps(3),
|
|
half-100Mbps(4),
|
|
full-100Mbps(5),
|
|
half-1Gigabps(6),
|
|
full-1Gigabps(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port speed and duplex mode."
|
|
::= { swL2PortInfoEntry 5 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2PortCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains control information about every port."
|
|
::= { swL2PortMgmt 2 }
|
|
|
|
swL2PortCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of control information for each port of the device."
|
|
INDEX { swL2PortCtrlPortIndex }
|
|
::= { swL2PortCtrlTable 1 }
|
|
|
|
SwL2PortCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2PortCtrlPortIndex
|
|
INTEGER,
|
|
swL2PortCtrlAdminState
|
|
INTEGER,
|
|
swL2PortCtrlNwayState
|
|
INTEGER,
|
|
swL2PortCtrlFlowCtrlState
|
|
INTEGER,
|
|
swL2PortCtrlCleanStatCounter
|
|
INTEGER,
|
|
swL2PortCtrlDescription
|
|
DisplayString
|
|
}
|
|
|
|
swL2PortCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port number in
|
|
the module)"
|
|
::= { swL2PortCtrlEntry 1 }
|
|
|
|
swL2PortCtrlAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decide the port enabled or disabled."
|
|
::= { swL2PortCtrlEntry 2 }
|
|
|
|
swL2PortCtrlNwayState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
nway-enabled(2),
|
|
nway-disabled-10Mbps-Half(3),
|
|
nway-disabled-10Mbps-Full(4),
|
|
nway-disabled-100Mbps-Half(5),
|
|
nway-disabled-100Mbps-Full(6),
|
|
nway-disabled-1Gigabps-Half(7),
|
|
nway-disabled-1Gigabps-Full(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Chose the port speed, duplex mode, and N-Way function mode."
|
|
::= { swL2PortCtrlEntry 3 }
|
|
|
|
swL2PortCtrlFlowCtrlState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set flow control function as enabled or disabled."
|
|
::= { swL2PortCtrlEntry 4 }
|
|
|
|
swL2PortCtrlCleanStatCounter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"As the object is set to active, the statistic counters of this port will be
|
|
cleared. If set to normal, do nothing."
|
|
::= { swL2PortCtrlEntry 5 }
|
|
|
|
swL2PortCtrlDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set port description in displayed string format."
|
|
::= { swL2PortCtrlEntry 6 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
|
|
-- ********************************************************************
|
|
|
|
swL2DiffServTypeCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2DiffServTypeCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains Differentiated Service(DiffServ) type information of each port."
|
|
::= { swL2DiffServMgmt 1 }
|
|
|
|
swL2DiffServTypeCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2DiffServTypeCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of DiffServ type information for each port of the device."
|
|
INDEX { swL2DiffServTypeCtrlPortIndex }
|
|
::= { swL2DiffServTypeCtrlTable 1 }
|
|
|
|
SwL2DiffServTypeCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2DiffServTypeCtrlPortIndex
|
|
INTEGER,
|
|
swL2DiffServTypeCtrlDiffServType
|
|
INTEGER
|
|
}
|
|
|
|
swL2DiffServTypeCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port number in
|
|
the module)"
|
|
::= { swL2DiffServTypeCtrlEntry 1 }
|
|
|
|
swL2DiffServTypeCtrlDiffServType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
dscp(2),
|
|
tos(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DiffServ type of this port.
|
|
disabled(1) --- no DiffServ and TOS field modification ability.
|
|
dscp(2) --- indicate the associated port's DSCP control information in
|
|
swL2DiffServDSCPCtrlTable will take effect for the replacement of
|
|
DSCP(DiffServ codepoint) field.
|
|
tos(3) --- indicate the associated port's TOS control information in
|
|
swL2DiffServTOSCtrlTable will take effect for the relationship of
|
|
replacement between IP TOS precedence and 802.1p tag control
|
|
priority field."
|
|
::= { swL2DiffServTypeCtrlEntry 2 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2DiffServDSCPCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2DiffServDSCPCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains DSCP (Differentiated Service Code Point) control
|
|
information."
|
|
::= { swL2DiffServMgmt 2 }
|
|
|
|
swL2DiffServDSCPCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2DiffServDSCPCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of DSCP control information for each port."
|
|
INDEX { swL2DiffServDSCPCtrlPortIndex }
|
|
::= { swL2DiffServDSCPCtrlTable 1 }
|
|
|
|
SwL2DiffServDSCPCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2DiffServDSCPCtrlPortIndex
|
|
INTEGER,
|
|
swL2DiffServDSCPCtrlMode
|
|
INTEGER,
|
|
swL2DiffServDSCPCtrlValue
|
|
INTEGER
|
|
}
|
|
|
|
swL2DiffServDSCPCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port number in
|
|
the module)"
|
|
::= { swL2DiffServDSCPCtrlEntry 1 }
|
|
|
|
swL2DiffServDSCPCtrlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dscp-Force-Overwrite(1),
|
|
dscp-Change-If-Zero(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP mode of this port.
|
|
dscp-Force-Overwrite(1) --- The DSCP field for the IP packet is replaced by the specific
|
|
value regardless of the DSCP of the incoming packet.
|
|
dscp-Change-If-Zero(2) --- The DSCP field for the IP packet is replaced by the specific
|
|
value if the DSCP of the incoming packet is zero."
|
|
::= { swL2DiffServDSCPCtrlEntry 2 }
|
|
|
|
swL2DiffServDSCPCtrlValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP value of this port."
|
|
::= { swL2DiffServDSCPCtrlEntry 3 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2DiffServTOSCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2DiffServTOSCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains TOS (Type Of Service) control
|
|
information."
|
|
::= { swL2DiffServMgmt 3 }
|
|
|
|
swL2DiffServTOSCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2DiffServTOSCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of TOS control information for each port."
|
|
INDEX { swL2DiffServTOSCtrlPortIndex }
|
|
::= { swL2DiffServTOSCtrlTable 1 }
|
|
|
|
SwL2DiffServTOSCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2DiffServTOSCtrlPortIndex
|
|
INTEGER,
|
|
swL2DiffServTOSCtrlMode
|
|
INTEGER,
|
|
swL2DiffServTOSCtrlValue
|
|
INTEGER
|
|
}
|
|
|
|
swL2DiffServTOSCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port number in
|
|
the module)"
|
|
::= { swL2DiffServTOSCtrlEntry 1 }
|
|
|
|
swL2DiffServTOSCtrlMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tos-Force-Overwrite(1),
|
|
tos-TOS-Overwrite-802dot1p(2),
|
|
tos-802dot1p-Overwrite-TOS(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TOS mode of this port.
|
|
tos-Force-Overwrite(1) --- The IP TOS precedence is changed to the specific value.
|
|
tos-TOS-Overwrite-802dot1p(2) --- If the incoming packet is IPv4 packet, change the 802.1p
|
|
tag control priority field to the value in IP TOS precedence
|
|
field.
|
|
tos-802dot1p-Overwrite-TOS(3) --- If the incoming packet is IPv4 packet, the IP TOS precedence
|
|
is changed to the value in the 802.1p tag control priority
|
|
field."
|
|
::= { swL2DiffServTOSCtrlEntry 2 }
|
|
|
|
swL2DiffServTOSCtrlValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"this object is used only if swL2DiffServTOSCtrlMode is tos-Force-Overwrite(1)"
|
|
::= { swL2DiffServTOSCtrlEntry 3 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2PortMirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
|
|
-- ********************************************************************
|
|
|
|
swL2PortMirrorSrcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortMirrorSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port snooping entries.Port mirroring function provides an easy
|
|
way to monitor traffic on any port. In this way any good packets appears
|
|
on the source mirror port also shows up on the target mirror port and
|
|
doesn't to reconstruct the LAN."
|
|
::= { swL2PortMirrorMgmt 1 }
|
|
|
|
swL2PortMirrorSrcPortEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortMirrorSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information provide an easy way to monitor traffic on any port.
|
|
The use can bring a fancy network monitor attaching to any target mirror
|
|
port and set the port to be monitored as source mirror port. "
|
|
INDEX { swL2PortMirrorIndex }
|
|
::= { swL2PortMirrorSrcPortTable 1 }
|
|
|
|
SwL2PortMirrorSrcPortEntry ::=
|
|
SEQUENCE {
|
|
swL2PortMirrorIndex
|
|
Integer32,
|
|
swL2PortMirrorDirection
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortMirrorIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of port to be sniffed. The port number
|
|
is the sequential (logical) number which is also applied to bridge MIB,
|
|
etc. "
|
|
::= { swL2PortMirrorSrcPortEntry 1}
|
|
|
|
swL2PortMirrorDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
ingress(2),
|
|
egress(3),
|
|
both(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object uses to setup what packets will be mirrored."
|
|
::= { swL2PortMirrorSrcPortEntry 2 }
|
|
|
|
swL2PortMirrorTargetPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates switch which port will sniff another port.
|
|
A trunk port member cannot be configured as a target Snooping port.
|
|
The port number is the sequential (logical) number which is also
|
|
applied to bridge MIB, etc. "
|
|
::= { swL2PortMirrorMgmt 2 }
|
|
|
|
swL2PortMirrorState OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the mirror status. "
|
|
::= { swL2PortMirrorMgmt 3 }
|
|
|
|
END
|