4302 lines
147 KiB
Plaintext
4302 lines
147 KiB
Plaintext
|
|
|
|
DGS3427-L2MGMT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress , TimeTicks , Integer32,
|
|
MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI
|
|
DisplayString,RowStatus FROM SNMPv2-TC
|
|
--PortList FROM Q-BRIDGE-MIB
|
|
Counter FROM RFC1155-SMI
|
|
AgentNotifyLevel FROM DLINK-ID-REC-MIB
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
dgs3427 FROM SW34XXPRIMGMT-MIB;
|
|
|
|
swL2MgmtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "0007150000Z"
|
|
ORGANIZATION " "
|
|
CONTACT-INFO
|
|
" "
|
|
DESCRIPTION
|
|
"The Structure of Layer 2 Network Management Information."
|
|
::= { dgs3427 2}
|
|
|
|
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
|
|
-- in the
|
|
-- "canonical"
|
|
-- order, copy from RFC1493
|
|
|
|
VlanId ::= INTEGER (1..4094)
|
|
PortList ::= OCTET STRING(SIZE (0..127))
|
|
|
|
swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
|
|
swL2MultiFilter OBJECT IDENTIFIER::={swL2MgmtMIB 2}
|
|
swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
|
|
swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
|
|
swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
|
|
swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
|
|
swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
|
|
swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
|
|
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
|
|
swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
|
|
swL2IpLimitedMulticastMgmt OBJECT IDENTIFIER::= { swL2MgmtMIB 15 }
|
|
swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 }
|
|
swL2VlanMgmt OBJECT IDENTIFIER::= { swL2MgmtMIB 17 }
|
|
swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 }
|
|
swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 }
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
-- ***********************************************************
|
|
IANAifMauAutoNegCapBits ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is used as the syntax of the
|
|
swL2PortAutoNegCapabilityBits, swL2PortAutoNegCapAdvertisedBits, and
|
|
swL2PortAutoNegCapReceivedBits objects in swL2PortAutoNegTable."
|
|
REFERENCE
|
|
"[IEEE802.3], Section 30.6.1.1.5"
|
|
SYNTAX BITS{
|
|
bOther(0), -- other or unknown
|
|
b10baseT(1), -- 10BASE-T half duplex mode
|
|
b10baseTFD(2), -- 10BASE-T full duplex mode
|
|
b100baseT4(3), -- 100BASE-T4
|
|
b100baseTX(4), -- 100BASE-TX half duplex mode
|
|
b100baseTXFD(5), -- 100BASE-TX full duplex mode
|
|
b100baseT2(6), -- 100BASE-T2 half duplex mode
|
|
b100baseT2FD(7), -- 100BASE-T2 full duplex mode
|
|
bFdxPause(8), -- PAUSE for full-duplex links
|
|
bFdxAPause(9), -- Asymmetric PAUSE for full-duplex
|
|
-- links
|
|
bFdxSPause(10), -- Symmetric PAUSE for full-duplex
|
|
-- links
|
|
bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for
|
|
-- full-duplex links
|
|
b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half
|
|
-- duplex mode
|
|
b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full
|
|
-- duplex mode
|
|
b1000baseT(14), -- 1000BASE-T half duplex mode
|
|
b1000baseTFD(15) -- 1000BASE-T full duplex mode
|
|
}
|
|
|
|
-- ********************************************************************
|
|
-- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
|
|
-- ********************************************************************
|
|
|
|
swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 }
|
|
|
|
|
|
swDevInfoTotalNumOfPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports within this switch. This value is the sum
|
|
of the ports within this switch."
|
|
::= { swL2DevInfo 1 }
|
|
|
|
swDevInfoNumOfPortInUse OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports in this switch connected to the segment or
|
|
the end stations."
|
|
::= { swL2DevInfo 2 }
|
|
|
|
swDevModuleInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwDevModuleInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the module information."
|
|
::= { swL2DevInfo 3 }
|
|
|
|
swDevModuleInfoEntry OBJECT-TYPE
|
|
SYNTAX SwDevModuleInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of management information for each unit in the system."
|
|
INDEX { swDevModuleInfoUnitID, swDevModuleInfoModuleID }
|
|
-- INDEX { swDevModuleInfoUnitID }
|
|
::= { swDevModuleInfoTable 1}
|
|
|
|
SwDevModuleInfoEntry ::=
|
|
SEQUENCE {
|
|
swDevModuleInfoUnitID
|
|
INTEGER,
|
|
swDevModuleInfoModuleID
|
|
INTEGER,
|
|
swDevModuleInfoModuleName
|
|
DisplayString,
|
|
swDevModuleInfoReversion
|
|
DisplayString,
|
|
swDevModuleInfoSerial
|
|
DisplayString,
|
|
swDevModuleInfoDescription
|
|
DisplayString
|
|
}
|
|
|
|
swDevModuleInfoUnitID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..12)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the specific unit ID in the stacking/chassis
|
|
table."
|
|
::= { swDevModuleInfoEntry 1 }
|
|
|
|
swDevModuleInfoModuleID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module ID of this unit."
|
|
::= { swDevModuleInfoEntry 2 }
|
|
|
|
swDevModuleInfoModuleName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing name of the the module. "
|
|
::= { swDevModuleInfoEntry 3 }
|
|
|
|
swDevModuleInfoReversion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing reversion of the module."
|
|
::= { swDevModuleInfoEntry 4 }
|
|
|
|
swDevModuleInfoSerial OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing serial of the module."
|
|
::= { swDevModuleInfoEntry 5 }
|
|
|
|
swDevModuleInfoDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing description of the
|
|
module. "
|
|
::= { swDevModuleInfoEntry 6 }
|
|
|
|
swDevInfoBootPromVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Boot Prom Version."
|
|
::= { swL2DevInfo 4 }
|
|
|
|
swDevInfoFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Firmware Version."
|
|
::= { swL2DevInfo 5 }
|
|
|
|
swDevInfoFrontPanelLedStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a set of system LED indications. The first two
|
|
octets is defined as system LED. The first LED is power LED. The
|
|
second LED is console LED. The third LED is RPS (Redundancy
|
|
Power Supply) LED. The other octets following the second
|
|
octets are the logical port LED (following dot1dBasePort
|
|
ordering). Every two bytes are presented to a port. The first
|
|
byte is presentd to the Link/Activity LED. The second byte is
|
|
presented to the Speed LED.
|
|
|
|
Link/Activity LED :
|
|
The most significant bit is used for blink/solid:
|
|
8 = The LED blinks.
|
|
|
|
The second significant bit is used for link status:
|
|
1 = link fail.
|
|
2 = link pass.
|
|
|
|
Speed LED :
|
|
01 = 10Mbps.
|
|
02 = 100Mbps.
|
|
03 = 1000Mbps.
|
|
04 = 10Gbps
|
|
|
|
The four remaining bits are currently unused and must be 0."
|
|
::= { swL2DevInfo 6 }
|
|
|
|
-- ***************************************************
|
|
swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 }
|
|
|
|
swL2DevCtrlStpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can be enabled or disabled spanning tree algorithm
|
|
during runtime of the system."
|
|
::= { swL2DevCtrl 1 }
|
|
|
|
swL2DevCtrlIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates layer 2 Internet Group Management
|
|
Protocol (IGMP) capture function is enabled or disabled."
|
|
::= { swL2DevCtrl 2 }
|
|
|
|
swL2DevCtrlIGMPSnoopingMcstRTOnly OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { swL2DevCtrl 3 }
|
|
|
|
swL2DevCtrlRmonState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can be enabled or disabled RMON."
|
|
::= { swL2DevCtrl 4 }
|
|
|
|
swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"As the object is set to active, all the statistic counters will
|
|
be cleared. If set to normal, do nothing."
|
|
::= { swL2DevCtrl 5 }
|
|
|
|
swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ;
|
|
The default value is DEFAULT_VLAN_ID of system ."
|
|
::= { swL2DevCtrl 6}
|
|
|
|
swL2DevCtrlManagementVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls which Vlan includes system ip. And the Vlan
|
|
should have been created."
|
|
::= { swL2DevCtrl 7 }
|
|
|
|
swL2MACNotifyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can enabled or disabled MAC Notification."
|
|
::= { swL2DevCtrl 8 }
|
|
|
|
swL2MACNotifyHistorySize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the history size of variation MAC in address table.
|
|
The default value is 1 ."
|
|
::= { swL2DevCtrl 9 }
|
|
|
|
swL2MACNotifyInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time interval in second for trigger the MAC notify message. "
|
|
::= { swL2DevCtrl 10 }
|
|
|
|
-- swL2CPUNotifyThreshold OBJECT-TYPE
|
|
-- SYNTAX INTEGER(0..100)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Set the threshold and when CPU utilization hit the threshold, device will send out trap & log.
|
|
-- 0 indicated that it do not send the trap. "
|
|
-- ::={swL2DevCtrl 11}
|
|
|
|
-- swL2DevCtrlAsymVlanState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object can enabl or disabl asymmetric vlan
|
|
-- during runtime of the system."
|
|
-- ::= { swL2DevCtrl 12 }
|
|
|
|
swL2DevCtrlWeb OBJECT IDENTIFIER ::= { swL2DevCtrl 13 }
|
|
|
|
swL2DevCtrlWebState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object control web status."
|
|
::= { swL2DevCtrlWeb 1 }
|
|
|
|
swL2DevCtrlWebTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can designate tcp port.
|
|
When web disable this object can't accessible."
|
|
::= { swL2DevCtrlWeb 2 }
|
|
|
|
-- ------------
|
|
swL2DevCtrlTelnet OBJECT IDENTIFIER ::= { swL2DevCtrl 14 }
|
|
|
|
swL2DevCtrlTelnetState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object control telnet status."
|
|
::= { swL2DevCtrlTelnet 1 }
|
|
|
|
swL2DevCtrlTelnetTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can designate tcp port.
|
|
When telnet disable this object can't accessible."
|
|
::= { swL2DevCtrlTelnet 2 }
|
|
|
|
swL2DevCtrlIpAutoconfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { swL2DevCtrl 15 }
|
|
|
|
swL2DevCtrlClipagingState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { swL2DevCtrl 17 }
|
|
|
|
swL2DevCtrlLLDPState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the state of the LLDP function.
|
|
When this function is enabled, the switch can start to transmit
|
|
LLDP packets and receive and process the LLDP packets.
|
|
The specific function of each port will depend on the per port
|
|
LLDP setting.
|
|
For the advertisement of LLDP packets, the switch announces the
|
|
information to its neighbor through ports. For receiving
|
|
LLDP packets, the switch will learn the information from the LLDP
|
|
packets advertised from the neighbor in the neighbor table.
|
|
"
|
|
::= { swL2DevCtrl 18 }
|
|
|
|
swL2DevCtrlLLDPForwardMessageState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When lldp is disabled and lldp forward_message's are enabled, the
|
|
LLDP Data Unit packets received by the switch will be forwarded. "
|
|
DEFVAL {disabled}
|
|
::={swL2DevCtrl 19}
|
|
|
|
swL2DevCtrlVLANTrunkState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the global state of the VLAN trunking feature of the device."
|
|
::={swL2DevCtrl 22}
|
|
|
|
swL2DevCtrlIGMPSnoopingMaxDataDrivenLearningCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Max Data Driven Learning Count of the IGMP snooping."
|
|
::={ swL2DevCtrl 23 }
|
|
|
|
-- ***************************************************
|
|
swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 }
|
|
|
|
swL2DevAlarmNewRoot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
--other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the device has become the new root of the Spanning Tree,
|
|
this object decide whether to send a new root trap."
|
|
::= { swL2DevAlarm 1 }
|
|
|
|
swL2DevAlarmTopologyChange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
--other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determine to send a trap or not when the switch
|
|
topology was changed. If the object is enabled(3),
|
|
the topologyChange trap is sent by the device when any of its
|
|
configured ports transitions from the Learning state to the
|
|
Forwarding state, or from the Forwarding state to the Blocking
|
|
state. For the same port tranition, the device doesn't send the
|
|
trap if this object value is disabled or other."
|
|
::= { swL2DevAlarm 2 }
|
|
|
|
swL2DevAlarmLinkChange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
--other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determine to send a trap or not when the link
|
|
was changed. If the object is enabled(3), the Link Change
|
|
trap is sent by the device when any of its ports link change.
|
|
The device doesn't send the trap if this object value is
|
|
disabled or other."
|
|
::= { swL2DevAlarm 3 }
|
|
-- ********************************************************************
|
|
-- swL2MultiFilter OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
|
|
-- ********************************************************************
|
|
swL2MultiFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2MultiFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A table that contains infomation about vlan multicast filter mode."
|
|
::={swL2MultiFilter 1}
|
|
|
|
swL2MultiFilterEntry OBJECT-TYPE
|
|
SYNTAX SwL2MultiFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of multicast filter mode information for each vlan. "
|
|
INDEX {swL2MultiFilterVid}
|
|
::={swL2MultiFilterTable 1}
|
|
|
|
SwL2MultiFilterEntry ::=
|
|
SEQUENCE{
|
|
swL2MultiFilterVid
|
|
INTEGER,
|
|
swL2MultiFilterMode
|
|
INTEGER
|
|
}
|
|
|
|
swL2MultiFilterVid OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" vid for each vlan"
|
|
::={swL2MultiFilterEntry 1}
|
|
|
|
swL2MultiFilterMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
forward-all-groups(1),
|
|
forward-unregistered-groups(2),
|
|
filter-unregistered-groups(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" vlan multicast filter mode."
|
|
::={swL2MultiFilterEntry 2}
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
|
|
-- ********************************************************************
|
|
|
|
swL2PortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every port."
|
|
::= { swL2PortMgmt 1 }
|
|
|
|
swL2PortInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each port of the device."
|
|
INDEX { swL2PortInfoPortIndex,swL2PortInfoMediumType }
|
|
::= { swL2PortInfoTable 1 }
|
|
|
|
SwL2PortInfoEntry ::=
|
|
SEQUENCE {
|
|
swL2PortInfoPortIndex
|
|
INTEGER,
|
|
swL2PortInfoMediumType
|
|
INTEGER,
|
|
swL2PortInfoUnitID
|
|
INTEGER,
|
|
swL2PortInfoType
|
|
INTEGER,
|
|
swL2PortInfoLinkStatus
|
|
INTEGER,
|
|
swL2PortInfoNwayStatus
|
|
INTEGER,
|
|
swL2PortInfoErrDisReason
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortInfoEntry 1 }
|
|
|
|
swL2PortInfoMediumType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
copper(1),
|
|
fiber(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates medium type of the port number."
|
|
::={swL2PortInfoEntry 2}
|
|
|
|
swL2PortInfoUnitID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ID of the unit in the system"
|
|
::= { swL2PortInfoEntry 3 }
|
|
|
|
swL2PortInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
portType-none(0),
|
|
portType-100Base-T(2),
|
|
portType-100Base-X(3),
|
|
portType-1000Base-T(4),
|
|
portType-1000Base-X(5),
|
|
portType-10GBase-R(6),
|
|
portType-10GBase-CX4(7),
|
|
portType-SIO(8),
|
|
portType-module-empty(9),
|
|
portType-user-last(10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the connector type of this port."
|
|
::= { swL2PortInfoEntry 4 }
|
|
|
|
swL2PortInfoLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
link-pass(2),
|
|
link-fail(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port link status."
|
|
::= { swL2PortInfoEntry 5 }
|
|
|
|
swL2PortInfoNwayStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
link-down(0),
|
|
full-10Mbps-8023x(1),
|
|
full-10Mbps-none(2),
|
|
half-10Mbps-backp(3),
|
|
half-10Mbps-none(4),
|
|
full-100Mbps-8023x(5),
|
|
full-100Mbps-none(6),
|
|
half-100Mbps-backp(7),
|
|
half-100Mbps-none(8),
|
|
full-1Gigabps-8023x(9),
|
|
full-1Gigabps-none(10),
|
|
half-1Gigabps-backp(11),
|
|
half-1Gigabps-none(12),
|
|
full-10Gigabps-8023x(13),
|
|
full-10Gigabps-none(14),
|
|
half-10Gigabps-8023x(15),
|
|
half-10Gigabps-none(16),
|
|
empty(17),
|
|
err-disabled(18)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port speed and duplex mode."
|
|
::= { swL2PortInfoEntry 6 }
|
|
|
|
swL2PortInfoErrDisReason OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
err-none(1),
|
|
storm-control(2),
|
|
lbd-control(3),
|
|
ddm-control(4),
|
|
bpdu-protection(5),
|
|
unidirectional(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port if disabled and why error disabled."
|
|
::= { swL2PortInfoEntry 7 }
|
|
|
|
|
|
-- *******************************************************
|
|
|
|
swL2PortCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains control information about every port."
|
|
::= { swL2PortMgmt 2 }
|
|
|
|
swL2PortCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of control information for each port of the device."
|
|
INDEX { swL2PortCtrlPortIndex,swL2PortCtrlMediumType}
|
|
::= { swL2PortCtrlTable 1 }
|
|
|
|
SwL2PortCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2PortCtrlPortIndex
|
|
INTEGER,
|
|
swL2PortCtrlMediumType
|
|
INTEGER,
|
|
swL2PortCtrlUnitIndex
|
|
INTEGER,
|
|
swL2PortCtrlAdminState
|
|
INTEGER,
|
|
swL2PortCtrlNwayState
|
|
INTEGER,
|
|
swL2PortCtrlFlowCtrlState
|
|
INTEGER,
|
|
swL2PortCtrlLockState
|
|
INTEGER,
|
|
swL2PortCtrlMACNotifyState
|
|
INTEGER,
|
|
-- swL2PortCtrlMulticastfilter
|
|
-- INTEGER,
|
|
swL2PortCtrlAutoNegRestart
|
|
INTEGER,
|
|
swL2PortCtrlAutoNegCapAdvertisedBits
|
|
IANAifMauAutoNegCapBits
|
|
}
|
|
|
|
swL2PortCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortCtrlEntry 1 }
|
|
|
|
swL2PortCtrlMediumType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
copper(1),
|
|
fiber(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates medium type of the port number."
|
|
::={swL2PortCtrlEntry 2}
|
|
|
|
swL2PortCtrlUnitIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ID of the unit in the device"
|
|
::= { swL2PortCtrlEntry 3 }
|
|
|
|
swL2PortCtrlAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decide the port enabled or disabled."
|
|
::= { swL2PortCtrlEntry 4 }
|
|
|
|
swL2PortCtrlNwayState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
nway-enabled(2),
|
|
nway-disabled-10Mbps-Half(3),
|
|
nway-disabled-10Mbps-Full(4),
|
|
nway-disabled-100Mbps-Half(5),
|
|
nway-disabled-100Mbps-Full(6),
|
|
-- nway-disabled-1Gigabps-Half(7),
|
|
nway-disabled-1Gigabps-Full(8),
|
|
nway-disabled-1Gigabps-Full-master(9),
|
|
nway-disabled-1Gigabps-Full-slave(10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Chose the port speed, duplex mode, and N-Way function mode."
|
|
::= { swL2PortCtrlEntry 5 }
|
|
|
|
swL2PortCtrlFlowCtrlState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flow control mechanism is different between full duplex
|
|
mode and half duplex mode. For half duplex mode, the jamming
|
|
signal is asserted. For full duplex mode, IEEE 802.3x flow
|
|
control function sends PAUSE frames and receives PAUSE frames."
|
|
::= { swL2PortCtrlEntry 6 }
|
|
|
|
swL2PortCtrlLockState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decide the port is locked or not."
|
|
::= { swL2PortCtrlEntry 7 }
|
|
|
|
swL2PortCtrlMACNotifyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object set each port MAC notification state."
|
|
::= { swL2PortCtrlEntry 8 }
|
|
|
|
-- swL2PortCtrlMulticastfilter OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(0),
|
|
-- forward-all-groups(1),
|
|
-- forward-unregistered-groups(2),
|
|
-- filter-unregistered-groups(3)
|
|
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object decide the multicast packets filtering mode on this port . "
|
|
-- ::= { swL2PortCtrlEntry 9 }
|
|
|
|
swL2PortCtrlAutoNegRestart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
restart(1),
|
|
norestart(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the value of this object is set to restart(1) then this will force
|
|
auto-negotiation to begin link renegotiation. If auto-negotiation
|
|
signaling is disabled, a write to this object has no effect.
|
|
Setting the value of this object to norestart(2) has no effect."
|
|
REFERENCE "[IEEE802.3], 30.6.1.2.1,
|
|
acAutoNegRestartAutoConfig."
|
|
::= { swL2PortCtrlEntry 11}
|
|
|
|
swL2PortCtrlAutoNegCapAdvertisedBits OBJECT-TYPE
|
|
SYNTAX IANAifMauAutoNegCapBits
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that uniquely identifies the set of capabilities advertised
|
|
by the local auto-negotiation entity.
|
|
|
|
Capabilities in this object that are not available in
|
|
swL2PortAutoNegInfoCapabilityBits cannot be enabled.
|
|
|
|
Note that the local auto-negotiation entity may advertise some
|
|
capabilities beyond the scope of this MIB. This is indicated by
|
|
returning the bit value bOther in addition to any bit values for
|
|
standard capabilities that are listed in the
|
|
IANAifMauAutoNegCapBits TC."
|
|
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.6,
|
|
aAutoNegAdvertisedTechnologyAbility."
|
|
::= { swL2PortCtrlEntry 12 }
|
|
|
|
swL2PortCtrlJumboFrame OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configure the switch's jumbo frame settings."
|
|
::= { swL2PortMgmt 3 }
|
|
|
|
swL2PortCtrlJumboFrameMaxSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes how many bytes the max jumbo frame is."
|
|
::= { swL2PortMgmt 4 }
|
|
|
|
-- swL2PortCableDiagnosisTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2PortCableDiagnosisEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A table that contains cable situation about every port."
|
|
-- ::= { swL2PortMgmt 4 }
|
|
--
|
|
-- swL2PortCableDiagnosisEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2PortCableDiagnosisEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of cable situation for each port of the device."
|
|
-- INDEX { swL2PortCableDiagnosisPortIndex, swL2PortCableDiagnosisPairIndex }
|
|
-- ::= { swL2PortCableDiagnosisTable 1 }
|
|
--
|
|
-- SwL2PortCableDiagnosisEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2PortCableDiagnosisPortIndex
|
|
-- INTEGER,
|
|
-- swL2PortCableDiagnosisPairIndex
|
|
-- INTEGER,
|
|
-- swL2PortCableDiagnosisCableStatus
|
|
-- INTEGER,
|
|
-- swL2PortCableDiagnosisPairStatus
|
|
-- INTEGER,
|
|
-- swL2PortCableDiagnosisPairLength
|
|
-- INTEGER
|
|
-- swL2PortCableDiagnosisPairLengthInaccuracy
|
|
-- INTEGER
|
|
-- }
|
|
--
|
|
-- swL2PortCableDiagnosisPortIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the module's port number.(1..Max port
|
|
-- number in the module)"
|
|
-- ::= { swL2PortCableDiagnosisEntry 1 }
|
|
--
|
|
-- swL2PortCableDiagnosisPairIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..4)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates pair index of the port.
|
|
-- The pair 1 means the pin 3 and 6 of the connector.
|
|
-- The pair 2 means the pin 1 and 2 of the connector.
|
|
-- The pair 3 means the pin 7 and 8 of the connector.
|
|
-- The pair 4 means the pin 4 and 5 of the connector."
|
|
-- ::= { swL2PortCableDiagnosisEntry 2 }
|
|
--
|
|
-- swL2PortCableDiagnosisCableStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- ok(0),
|
|
-- open(1),
|
|
-- short(2),
|
|
-- open-short(3),
|
|
-- not-support(4),
|
|
-- unknown(5)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the cable status."
|
|
-- ::= { swL2PortCableDiagnosisEntry 3 }
|
|
--
|
|
-- swL2PortCableDiagnosisPairStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- ok(0),
|
|
-- open(1),
|
|
-- short(2),
|
|
-- fail(3),
|
|
-- not-supported(4),
|
|
-- unknown(5)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the status of the pair."
|
|
-- ::= { swL2PortCableDiagnosisEntry 3 }
|
|
--
|
|
-- swL2PortCableDiagnosisPairLength OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the approx. length or length to failure of
|
|
-- the pair. The value is a unit of meter."
|
|
-- ::= { swL2PortCableDiagnosisEntry 4 }
|
|
--
|
|
-- swL2PortCableDiagnosisPairLengthInaccuracy OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the inaccuracy of Pair length. The
|
|
-- value is a unit of meter."
|
|
-- ::= { swL2PortCableDiagnosisEntry 6 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortCounterCtrlTable
|
|
-- -----------------------------------------------------------------------------
|
|
swL2PortCounterCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortCounterCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that is used to clear counter information about every port."
|
|
::= { swL2PortMgmt 6 }
|
|
|
|
swL2PortCounterCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortCounterCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries used to clear the counter information for each port of the device."
|
|
INDEX { swL2PortCounterCtrlPortIndex }
|
|
::= { swL2PortCounterCtrlTable 1 }
|
|
|
|
SwL2PortCounterCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2PortCounterCtrlPortIndex
|
|
INTEGER,
|
|
swL2PortCounterClearCtrl
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortCounterCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortCounterCtrlEntry 1 }
|
|
|
|
swL2PortCounterClearCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
start(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether to clear the counters for each port of the device or not."
|
|
::= { swL2PortCounterCtrlEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortAutoNegInfoTable
|
|
-- -----------------------------------------------------------------------------
|
|
swL2PortAutoNegInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortAutoNegInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every port's auto negotiation status."
|
|
::= { swL2PortMgmt 8 }
|
|
|
|
swL2PortAutoNegInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortAutoNegInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each port auto negotiation of the device."
|
|
INDEX { swL2PortAutoNegInfoPortIndex }
|
|
::= { swL2PortAutoNegInfoTable 1 }
|
|
|
|
SwL2PortAutoNegInfoEntry ::=
|
|
SEQUENCE {
|
|
swL2PortAutoNegInfoPortIndex
|
|
INTEGER,
|
|
swL2PortAutoNegInfoAdminStatus
|
|
INTEGER,
|
|
swL2PortAutoNegInfoCapabilityBits
|
|
IANAifMauAutoNegCapBits,
|
|
swL2PortAutoNegInfoCapAdvertisedBits
|
|
IANAifMauAutoNegCapBits,
|
|
swL2PortAutoNegInfoCapReceivedBits
|
|
IANAifMauAutoNegCapBits
|
|
}
|
|
|
|
swL2PortAutoNegInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortAutoNegInfoEntry 1 }
|
|
|
|
swL2PortAutoNegInfoAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" If the value of this object is disabled(2) then the interface will act as
|
|
it would if it had no auto-negotiation signaling.
|
|
The status is affect by setting swL2PortCtrlNwayState."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.2, aAutoNegAdminState,
|
|
and 30.6.1.2.2, acAutoNegAdminControl."
|
|
::= { swL2PortAutoNegInfoEntry 2 }
|
|
|
|
swL2PortAutoNegInfoCapabilityBits OBJECT-TYPE
|
|
SYNTAX IANAifMauAutoNegCapBits
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that uniquely identifies the set of capabilities of the local
|
|
auto-negotiation entity. Note that interfaces that support this MIB may
|
|
have capabilities that extend beyond the scope of this MIB.
|
|
|
|
Note that the local auto-negotiation entity may support some capabilities
|
|
beyond the scope of this MIB. This is indicated by returning the bit value
|
|
bOther in addition to any bit values for standard capabilities that are listed
|
|
in the IANAifMauAutoNegCapBits TC."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.5,
|
|
aAutoNegLocalTechnologyAbility."
|
|
::= { swL2PortAutoNegInfoEntry 3 }
|
|
|
|
swL2PortAutoNegInfoCapAdvertisedBits OBJECT-TYPE
|
|
SYNTAX IANAifMauAutoNegCapBits
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that uniquely identifies the set of capabilities advertised by the
|
|
local auto-negotiation entity.
|
|
|
|
Capabilities in this object that are not available in
|
|
swL2PortAutoNegCapabilityBits cannot be enabled.
|
|
|
|
Note that the local auto-negotiation entity may advertise some capabilities
|
|
beyond the scope of this MIB. This is indicated by returning the bit value
|
|
bOther in addition to any bit values for standard capabilities that are listed
|
|
in the IANAifMauAutoNegCapBits TC."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.6,
|
|
aAutoNegAdvertisedTechnologyAbility."
|
|
::= { swL2PortAutoNegInfoEntry 4 }
|
|
|
|
swL2PortAutoNegInfoCapReceivedBits OBJECT-TYPE
|
|
SYNTAX IANAifMauAutoNegCapBits
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that uniquely identifies the set of capabilities received from the
|
|
remote auto-negotiation entity.
|
|
|
|
Note that interfaces that support this MIB may be attached to remote
|
|
auto-negotiation entities that have capabilities beyond the scope of this
|
|
MIB. This is indicated by returning the bit value bOther in addition to
|
|
any bit values for standard capabilities that are listed in the
|
|
IANAifMauAutoNegCapBits TC."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.7,
|
|
aAutoNegReceivedTechnologyAbility."
|
|
::= { swL2PortAutoNegInfoEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortDropCounterTable
|
|
-- -----------------------------------------------------------------------------
|
|
swL2PortDropCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortDropCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information for each port drop counter."
|
|
::= { swL2PortMgmt 9 }
|
|
|
|
swL2PortDropCounterEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortDropCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each port auto negotiation of the device."
|
|
INDEX { swL2PortDropCounterPortIndex }
|
|
::= { swL2PortDropCounterTable 1 }
|
|
|
|
SwL2PortDropCounterEntry ::=
|
|
SEQUENCE {
|
|
swL2PortDropCounterPortIndex
|
|
INTEGER,
|
|
swL2PortBufferFullDrops
|
|
Counter,
|
|
swL2PortACLDrops
|
|
Counter,
|
|
swL2PortMulticastDrops
|
|
Counter,
|
|
swL2PortVLANIngressDrops
|
|
Counter
|
|
}
|
|
|
|
swL2PortDropCounterPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortDropCounterEntry 1 }
|
|
|
|
swL2PortBufferFullDrops OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets discarded while buffer full."
|
|
::= { swL2PortDropCounterEntry 2 }
|
|
|
|
swL2PortACLDrops OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets denied by ACLs."
|
|
::= { swL2PortDropCounterEntry 3 }
|
|
|
|
swL2PortMulticastDrops OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of multicast packet that is discarded."
|
|
::= { swL2PortDropCounterEntry 4 }
|
|
|
|
swL2PortVLANIngressDrops OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets discarded by VLAN ingress checking."
|
|
::= { swL2PortDropCounterEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortStatisTable
|
|
-- -----------------------------------------------------------------------------
|
|
swL2PortStatisTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortStatisEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information for each port 1519-9216 counter."
|
|
::= { swL2PortMgmt 10 }
|
|
|
|
swL2PortStatisEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortStatisEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each port counter of the device."
|
|
INDEX { swL2PortStatisPortIndex }
|
|
::= { swL2PortStatisTable 1 }
|
|
|
|
SwL2PortStatisEntry ::=
|
|
SEQUENCE {
|
|
swL2PortStatisPortIndex
|
|
INTEGER,
|
|
swL2PortStatisPkts1519to1522Octets
|
|
Counter,
|
|
swL2PortStatisPkts1519to2047Octets
|
|
Counter,
|
|
swL2PortStatisPkts2048to4095Octets
|
|
Counter,
|
|
swL2PortStatisPkts4096to9216Octets
|
|
Counter
|
|
}
|
|
|
|
swL2PortStatisPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortStatisEntry 1 }
|
|
|
|
swL2PortStatisPkts1519to1522Octets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets length 1519-1522."
|
|
::= { swL2PortStatisEntry 2 }
|
|
|
|
swL2PortStatisPkts1519to2047Octets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets length 1519-1522."
|
|
::= { swL2PortStatisEntry 3 }
|
|
|
|
swL2PortStatisPkts2048to4095Octets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets length 2048-4095."
|
|
::= { swL2PortStatisEntry 4 }
|
|
|
|
swL2PortStatisPkts4096to9216Octets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets length 4096-9216."
|
|
::= { swL2PortStatisEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2PortSfpInformationTable
|
|
-- -----------------------------------------------------------------------------
|
|
swL2PortSfpInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortSfpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information for each sfp pluged in port."
|
|
::= { swL2PortMgmt 11 }
|
|
|
|
swL2PortSfpInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortSfpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each sfp pluged in port."
|
|
INDEX { swL2PortSfpInfoPortIndex }
|
|
::= { swL2PortSfpInfoTable 1 }
|
|
|
|
SwL2PortSfpInfoEntry ::=
|
|
SEQUENCE {
|
|
swL2PortSfpInfoPortIndex
|
|
INTEGER,
|
|
swL2PortSfpInfoConnectType
|
|
DisplayString,
|
|
swL2PortSfpInfoVendorName
|
|
DisplayString,
|
|
swL2PortSfpInfoVendorPN
|
|
DisplayString,
|
|
swL2PortSfpInfoVendorSN
|
|
DisplayString,
|
|
swL2PortSfpInfoVendorOUI
|
|
DisplayString,
|
|
swL2PortSfpInfoVendorRev
|
|
DisplayString,
|
|
swL2PortSfpInfoDateCode
|
|
DisplayString,
|
|
swL2PortSfpInfoFiberType
|
|
DisplayString,
|
|
swL2PortSfpInfoBaudRate
|
|
INTEGER,
|
|
swL2PortSfpInfoWavelength
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortSfpInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortSfpInfoEntry 1 }
|
|
|
|
swL2PortSfpInfoConnectType OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ConnectType of sfp informaiton."
|
|
::= { swL2PortSfpInfoEntry 2 }
|
|
swL2PortSfpInfoVendorName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor name of sfp informaiton."
|
|
::= { swL2PortSfpInfoEntry 3 }
|
|
|
|
swL2PortSfpInfoVendorPN OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor PN of sfp informaiton."
|
|
::= { swL2PortSfpInfoEntry 4 }
|
|
|
|
swL2PortSfpInfoVendorSN OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor SN of sfp informaiton."
|
|
::= { swL2PortSfpInfoEntry 5 }
|
|
|
|
swL2PortSfpInfoVendorOUI OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor OUI of sfp information."
|
|
::= { swL2PortSfpInfoEntry 6 }
|
|
swL2PortSfpInfoVendorRev OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor Rev of sfp information."
|
|
::= { swL2PortSfpInfoEntry 7 }
|
|
swL2PortSfpInfoDateCode OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date code of sfp information."
|
|
::= { swL2PortSfpInfoEntry 8 }
|
|
swL2PortSfpInfoFiberType OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fiber type of sfp information."
|
|
::= { swL2PortSfpInfoEntry 9 }
|
|
swL2PortSfpInfoBaudRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The baud rate of sfp information."
|
|
::= { swL2PortSfpInfoEntry 10 }
|
|
swL2PortSfpInfoWavelength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wavelength of sfp information."
|
|
::= { swL2PortSfpInfoEntry 11 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
|
|
-- ********************************************************************
|
|
|
|
swL2QOSBandwidthControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2QOSBandwidthControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { swL2QOSMgmt 1 }
|
|
|
|
swL2QOSBandwidthControlEntry OBJECT-TYPE
|
|
SYNTAX SwL2QOSBandwidthControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2QOSBandwidthControlTable."
|
|
INDEX { swL2QOSBandwidthPortIndex }
|
|
::= { swL2QOSBandwidthControlTable 1 }
|
|
|
|
SwL2QOSBandwidthControlEntry ::=
|
|
SEQUENCE {
|
|
swL2QOSBandwidthPortIndex
|
|
INTEGER,
|
|
swL2QOSBandwidthRxRate
|
|
INTEGER,
|
|
swL2QOSBandwidthTxRate
|
|
INTEGER,
|
|
swL2QOSBandwidthRadiusRxRate
|
|
INTEGER,
|
|
swL2QOSBandwidthRadiusTxRate
|
|
INTEGER
|
|
}
|
|
|
|
swL2QOSBandwidthPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..768)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port ."
|
|
::= { swL2QOSBandwidthControlEntry 1 }
|
|
|
|
swL2QOSBandwidthRxRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..10000)
|
|
SYNTAX INTEGER (64..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates RX Rate(1kbit/sec) of the specifed port. Value 10000000 means no limit."
|
|
::= { swL2QOSBandwidthControlEntry 2 }
|
|
|
|
swL2QOSBandwidthTxRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..10000)
|
|
SYNTAX INTEGER (64..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates TX Rate(1kbit/sec) of the specifed port. Value 10000000 means no limit."
|
|
::= { swL2QOSBandwidthControlEntry 3 }
|
|
|
|
swL2QOSBandwidthRadiusRxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RxRate value comes from RADIUS server,
|
|
If an 802.1X port is authenticated, this value
|
|
will overwrites the locally configured RxRate. "
|
|
::= { swL2QOSBandwidthControlEntry 4 }
|
|
|
|
swL2QOSBandwidthRadiusTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TxRate value comes from RADIUS server,
|
|
If an 802.1X port is authenticated, this value
|
|
will overwrites the locally configured TxRate. "
|
|
::= { swL2QOSBandwidthControlEntry 5 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2QOSSchedulingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2QOSSchedulingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { swL2QOSMgmt 2 }
|
|
|
|
swL2QOSSchedulingEntry OBJECT-TYPE
|
|
SYNTAX SwL2QOSSchedulingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2QOSSchedulingTable."
|
|
INDEX { swL2QOSSchedulingPort,swL2QOSSchedulingClassID }
|
|
::= { swL2QOSSchedulingTable 1 }
|
|
|
|
SwL2QOSSchedulingEntry ::=
|
|
SEQUENCE {
|
|
-- swL2QOSSchedulingClassIndex
|
|
swL2QOSSchedulingPort
|
|
INTEGER,
|
|
swL2QOSSchedulingClassID
|
|
INTEGER,
|
|
swL2QOSSchedulingMaxPkts
|
|
INTEGER,
|
|
swL2QOSSchedulingMechanism
|
|
INTEGER,
|
|
swL2QOSSchedulingMechanismEffec
|
|
INTEGER
|
|
}
|
|
|
|
--swL2QOSSchedulingClassIndex OBJECT-TYPE
|
|
--SYNTAX INTEGER (0..7)
|
|
--SYNTAX INTEGER (0..6)
|
|
--MAX-ACCESS read-only
|
|
--STATUS current
|
|
--DESCRIPTION
|
|
--"Indicates the hardware queue number."
|
|
--::= { swL2QOSSchedulingEntry 1 }
|
|
|
|
swL2QOSSchedulingPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port number."
|
|
::= { swL2QOSSchedulingEntry 1 }
|
|
|
|
swL2QOSSchedulingClassID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the hardware queue number."
|
|
::= { swL2QOSSchedulingEntry 2 }
|
|
|
|
swL2QOSSchedulingMaxPkts OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum number of packets the hardware priority queue will be allowed
|
|
to transmit before allowing the next lowest priority queue to transmit its packets.
|
|
a value between 0 and 15 can be specified."
|
|
::= { swL2QOSSchedulingEntry 3 }
|
|
|
|
swL2QOSSchedulingMechanism OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
strict(1),
|
|
-- roundrobin(2),
|
|
weightfair(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mechanism of QOS scheduling."
|
|
::= { swL2QOSSchedulingEntry 4 }
|
|
|
|
swL2QOSSchedulingMechanismEffec OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
strict(1),
|
|
-- roundrobin(2),
|
|
weightfair(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the effective mechanism of QoS scheduling.
|
|
If the swQoSSchedulingWeight is configured to be 0,
|
|
then this object will always display strict (1)."
|
|
::= { swL2QOSSchedulingEntry 5 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2QOS8021pUserPriorityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2QOS8021pUserPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { swL2QOSMgmt 3 }
|
|
|
|
swL2QOS8021pUserPriorityEntry OBJECT-TYPE
|
|
SYNTAX SwL2QOS8021pUserPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2QOS8021pUserPriorityTable."
|
|
INDEX { swL2QOS8021pUserPriorityIndex }
|
|
::= { swL2QOS8021pUserPriorityTable 1 }
|
|
|
|
SwL2QOS8021pUserPriorityEntry ::=
|
|
SEQUENCE {
|
|
swL2QOS8021pUserPriorityIndex
|
|
INTEGER,
|
|
swL2QOS8021pUserPriorityClass
|
|
INTEGER
|
|
}
|
|
|
|
swL2QOS8021pUserPriorityIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.1p user priority ."
|
|
::= { swL2QOS8021pUserPriorityEntry 1 }
|
|
|
|
swL2QOS8021pUserPriorityClass OBJECT-TYPE
|
|
SYNTAX INTEGER (0..6)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the switch's hardware priority queue. The switch has four hardware
|
|
priority queues available. They are numbered between 0 (the lowest priority)
|
|
and 6 (the highest priority)."
|
|
::= { swL2QOS8021pUserPriorityEntry 2 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2QOS8021pDefaultPriorityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2QOS8021pDefaultPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { swL2QOSMgmt 4 }
|
|
|
|
swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE
|
|
SYNTAX SwL2QOS8021pDefaultPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2QOS8021pDefaultPriorityTable."
|
|
INDEX { swL2QOS8021pDefaultPriorityIndex }
|
|
::= { swL2QOS8021pDefaultPriorityTable 1 }
|
|
|
|
SwL2QOS8021pDefaultPriorityEntry ::=
|
|
SEQUENCE {
|
|
swL2QOS8021pDefaultPriorityIndex
|
|
INTEGER,
|
|
swL2QOS8021pDefaultPriority
|
|
INTEGER,
|
|
swL2QOS8021pRadiusPriority
|
|
INTEGER
|
|
}
|
|
|
|
swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..768)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port number ."
|
|
::= { swL2QOS8021pDefaultPriorityEntry 1 }
|
|
|
|
swL2QOS8021pDefaultPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value to assign to untagged packets received by the
|
|
switch ports on the switch.."
|
|
::= { swL2QOS8021pDefaultPriorityEntry 2 }
|
|
|
|
swL2QOS8021pRadiusPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of 802.1p comes from RADIUS server.
|
|
If an 802.1X port is authenticated, this value
|
|
will overwrite the local configured value."
|
|
::= { swL2QOS8021pDefaultPriorityEntry 3 }
|
|
|
|
swL2QOSSchedulingMechanismCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
strict(1),
|
|
roundrobin(2),
|
|
weightfair(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can control QOS scheduling Mechanism."
|
|
::= { swL2QOSMgmt 5 }
|
|
|
|
swL2QOSHolPreventionCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control QOS Hol Prevention"
|
|
::= { swL2QOSMgmt 6 }
|
|
|
|
swCosBandwidthControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwCosBandwidthControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about
|
|
CoS Bandwidth Control on each port."
|
|
::= { swL2QOSMgmt 7 }
|
|
|
|
swCosBandwidthControlEntry OBJECT-TYPE
|
|
SYNTAX SwCosBandwidthControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list that contains CoS Bandwidth Control information
|
|
for each port."
|
|
INDEX { swCosBandwidthPort, swCosBandwidthClassID }
|
|
::= { swCosBandwidthControlTable 1 }
|
|
|
|
SwCosBandwidthControlEntry ::=
|
|
SEQUENCE {
|
|
swCosBandwidthPort
|
|
INTEGER,
|
|
swCosBandwidthClassID
|
|
INTEGER,
|
|
swCosBandwidthMinRate
|
|
INTEGER,
|
|
swCosBandwidthMaxRate
|
|
INTEGER
|
|
}
|
|
|
|
swCosBandwidthPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port number."
|
|
::= { swCosBandwidthControlEntry 1 }
|
|
|
|
swCosBandwidthClassID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the hardware queue number."
|
|
::= { swCosBandwidthControlEntry 2 }
|
|
|
|
swCosBandwidthMinRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0|64..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Minimum Rate of the specified port.
|
|
A value of 0 means no limit."
|
|
::= { swCosBandwidthControlEntry 3 }
|
|
|
|
swCosBandwidthMaxRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0|64..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Maximum Rate of the specified port.
|
|
A value of 0 means no limit."
|
|
::= { swCosBandwidthControlEntry 4 }
|
|
|
|
-- ****************************************
|
|
|
|
swQosDscpTrustPortCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwQosDscpTrustPortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about the
|
|
DSCP trust portlist."
|
|
::= { swL2QOSMgmt 8 }
|
|
|
|
swQosDscpTrustPortCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwQosDscpTrustPortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list that contains the DSCP trusted state per port."
|
|
INDEX { swQosDscpTrustPortCtrlPortIndex }
|
|
::= { swQosDscpTrustPortCtrlTable 1 }
|
|
|
|
SwQosDscpTrustPortCtrlEntry ::=
|
|
SEQUENCE {
|
|
swQosDscpTrustPortCtrlPortIndex
|
|
INTEGER,
|
|
swQosDscpTrustPortCtrlState
|
|
INTEGER
|
|
}
|
|
|
|
swQosDscpTrustPortCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port number."
|
|
::= { swQosDscpTrustPortCtrlEntry 1 }
|
|
|
|
swQosDscpTrustPortCtrlState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable/disable the DSCP
|
|
trusted state on a selected port."
|
|
DEFVAL { disabled }
|
|
::= { swQosDscpTrustPortCtrlEntry 2 }
|
|
|
|
|
|
-- ****************************************
|
|
|
|
swQosDscpMapGlobalCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwQosDscpMapGlobalCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about
|
|
DSCP map to priority and packet color on
|
|
each port."
|
|
::= { swL2QOSMgmt 9 }
|
|
|
|
swQosDscpMapGlobalCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwQosDscpMapGlobalCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list that contains DSCP map information
|
|
for each port."
|
|
INDEX { swQosDscpMapGlobalCtrlDscpIndex }
|
|
::= { swQosDscpMapGlobalCtrlTable 1 }
|
|
|
|
SwQosDscpMapGlobalCtrlEntry ::=
|
|
SEQUENCE {
|
|
swQosDscpMapGlobalCtrlDscpIndex
|
|
INTEGER,
|
|
swQosDscpMapGlobalCtrl8021pPriority
|
|
INTEGER,
|
|
swQosDscpMapGlobalCtrlNewDscp
|
|
INTEGER
|
|
}
|
|
|
|
swQosDscpMapGlobalCtrlDscpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the source DSCP incoming packet."
|
|
::= { swQosDscpMapGlobalCtrlEntry 1 }
|
|
|
|
swQosDscpMapGlobalCtrl8021pPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the 802.1p priority on each port.
|
|
Default value is:
|
|
DSCP Priority
|
|
0-7 0
|
|
8-15 1
|
|
16-23 2
|
|
24-31 3
|
|
32-39 4
|
|
40-47 5
|
|
48-55 6
|
|
56-63 7
|
|
"
|
|
::= { swQosDscpMapGlobalCtrlEntry 2 }
|
|
|
|
swQosDscpMapGlobalCtrlNewDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the new DSCP map on each port."
|
|
::= { swQosDscpMapGlobalCtrlEntry 3 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
|
|
-- ********************************************************************
|
|
|
|
swL2PortSecurityControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port security feature which controls the address leaning capability and the
|
|
traffic forwarding decision. Each port can have this function enabled or disabled.
|
|
When it is enabled and a number is given said N, which allows N addresses to be
|
|
learned at this port, the first N learned addresses are locked at this port as
|
|
static entry. When the learned addresses number reach N, any coming packet with
|
|
not learned source addresses are discarded (e.g. dropped) and no more new addresses
|
|
can be learned at this port."
|
|
::= { swL2PortSecurityMgmt 1 }
|
|
|
|
swL2PortSecurityControlEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortSecurityControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2PortSecurityControlTable."
|
|
INDEX { swL2PortSecurityPortIndex }
|
|
::= { swL2PortSecurityControlTable 1 }
|
|
|
|
SwL2PortSecurityControlEntry ::=
|
|
SEQUENCE {
|
|
swL2PortSecurityPortIndex
|
|
INTEGER,
|
|
swL2PortSecurityMaxLernAddr
|
|
INTEGER,
|
|
swL2PortSecurityMode
|
|
INTEGER,
|
|
swL2PortSecurityAdmState
|
|
INTEGER
|
|
}
|
|
|
|
swL2PortSecurityPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..768)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the secured port to lock address learning."
|
|
::= { swL2PortSecurityControlEntry 1 }
|
|
|
|
swL2PortSecurityMaxLernAddr OBJECT-TYPE
|
|
SYNTAX INTEGER (0..64)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates allowable number of addresses to be learned at this port."
|
|
::= { swL2PortSecurityControlEntry 2 }
|
|
|
|
swL2PortSecurityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
permanent(2),
|
|
deleteOnTimeout(3),
|
|
deleteOnReset(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the mode of locking address.
|
|
In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer
|
|
expire. In this mode, when the locked address is aged
|
|
out, the number of address can be learned has to be
|
|
increased by one.
|
|
In deleteOnReset(4) mode - never age out the locked addresses unless restart
|
|
the system to prevent from port movement or intrusion."
|
|
::= { swL2PortSecurityControlEntry 3 }
|
|
|
|
swL2PortSecurityAdmState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates administration state of locking address."
|
|
::= { swL2PortSecurityControlEntry 4 }
|
|
--******************************************************************************
|
|
|
|
swL2PortSecurityDelCtrl OBJECT IDENTIFIER ::= { swL2PortSecurityMgmt 2 }
|
|
|
|
swL2PortSecurityDelVlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates vlan name."
|
|
::= { swL2PortSecurityDelCtrl 1 }
|
|
|
|
swL2PortSecurityDelPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..768)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port.0 indicated the function isn't working now."
|
|
::= { swL2PortSecurityDelCtrl 2 }
|
|
|
|
swL2PortSecurityDelMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies MAC address."
|
|
::= { swL2PortSecurityDelCtrl 3 }
|
|
|
|
swL2PortSecurityDelActivity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
start(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { swL2PortSecurityDelCtrl 4 }
|
|
|
|
--******************************************************************************
|
|
|
|
-- swL2PortSecurityTrapLogState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- enabled(2),
|
|
-- disabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Used to enable or disable port lock trap log.."
|
|
-- ::= { swL2PortSecurityMgmt 3 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
|
|
-- ********************************************************************
|
|
|
|
swL2TrunkMaxSupportedEntries OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of entries in the trunk configuration table
|
|
(swL2TrunkCtrlTable)."
|
|
::= { swL2TrunkMgmt 1 }
|
|
|
|
swL2TrunkCurrentNumEntries OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current actived number of entries in the trunk configuration
|
|
table."
|
|
::= { swL2TrunkMgmt 2 }
|
|
|
|
swL2TrunkCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrunkCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifys which ports group a set of ports(up to 8)
|
|
into a single logical link."
|
|
::= { swL2TrunkMgmt 3 }
|
|
|
|
swL2TrunkCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrunkCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information specifies which ports group a set of
|
|
ports(up to 8) into a single logical link."
|
|
INDEX { swL2TrunkIndex }
|
|
::= { swL2TrunkCtrlTable 1 }
|
|
|
|
SwL2TrunkCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2TrunkIndex
|
|
INTEGER,
|
|
swL2TrunkName
|
|
DisplayString,
|
|
swL2TrunkMasterPort
|
|
INTEGER,
|
|
swL2TrunkMember
|
|
PortList,
|
|
swL2TrunkFloodingPort
|
|
INTEGER,
|
|
swL2TrunkType
|
|
INTEGER,
|
|
swL2TrunkState
|
|
RowStatus,
|
|
swL2TrunkActivePorts
|
|
PortList
|
|
}
|
|
|
|
swL2TrunkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of logical port trunk. The trunk group number depend
|
|
on the existence of unit and module."
|
|
::= { swL2TrunkCtrlEntry 1 }
|
|
|
|
swL2TrunkName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..12))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of logical port trunk."
|
|
::= { swL2TrunkCtrlEntry 2 }
|
|
|
|
|
|
swL2TrunkMasterPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the master port number of the port trunk
|
|
entry. When using Port Trunk, you can not configure the other
|
|
ports of the group except the master port.
|
|
Their configuration must be same as the master port (e.g. speed,
|
|
duplex, enabled/disabled, flow control, and so on)."
|
|
::= { swL2TrunkCtrlEntry 3 }
|
|
|
|
swL2TrunkMember OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate how many number of ports is included in this Trunk.
|
|
The trunk port number depend on the existence of module.
|
|
The maximum number of ports is 8 for one trunks."
|
|
::= { swL2TrunkCtrlEntry 4 }
|
|
|
|
swL2TrunkFloodingPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the flooding port number of the port trunk
|
|
entry. The first port of the trunk is implicitly configured to
|
|
be the flooding port."
|
|
::= { swL2TrunkCtrlEntry 5 }
|
|
|
|
swL2TrunkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
static(2),
|
|
lacp(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicated that type of the trunk group.
|
|
static : is static trunk group
|
|
lacp : is LACP trunk group . "
|
|
::= { swL2TrunkCtrlEntry 6 }
|
|
|
|
swL2TrunkState OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { swL2TrunkCtrlEntry 7 }
|
|
|
|
swL2TrunkActivePorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the active ports of the port trunk entry."
|
|
::={ swL2TrunkCtrlEntry 8}
|
|
|
|
swL2TrunkAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
mac-source(2),
|
|
mac-destination(3),
|
|
mac-source-dest(4),
|
|
ip-source(5),
|
|
ip-destination(6),
|
|
ip-source-dest(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures to part of the packet examined by the
|
|
switch when selecting the egress port for transmitting
|
|
load-sharing data."
|
|
::= { swL2TrunkMgmt 4 }
|
|
|
|
swL2TrunkLACPPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifys which ports group a set of ports(up to 8)
|
|
into a single logical link."
|
|
::= { swL2TrunkMgmt 5 }
|
|
|
|
swL2TrunkLACPPortEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrunkLACPPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information specifies which ports group a set of
|
|
ports(up to 8) into a single logical link."
|
|
INDEX { swL2TrunkLACPPortIndex }
|
|
::= { swL2TrunkLACPPortTable 1 }
|
|
|
|
SwL2TrunkLACPPortEntry ::=
|
|
SEQUENCE {
|
|
swL2TrunkLACPPortIndex
|
|
INTEGER,
|
|
swL2TrunkLACPPortState
|
|
INTEGER
|
|
}
|
|
|
|
swL2TrunkLACPPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of logical port lacp. "
|
|
::= { swL2TrunkLACPPortEntry 1 }
|
|
|
|
swL2TrunkLACPPortState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of logical port lacp."
|
|
::= { swL2TrunkLACPPortEntry 2 }
|
|
|
|
swL2TrunkVLANTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrunkVLANEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to manage the VLAN trunking feature of the device."
|
|
::= { swL2TrunkMgmt 6 }
|
|
|
|
swL2TrunkVLANEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrunkVLANEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the VLAN trunking settings for each port."
|
|
INDEX { swL2TrunkVLANPort }
|
|
::= { swL2TrunkVLANTable 1 }
|
|
|
|
SwL2TrunkVLANEntry ::=
|
|
SEQUENCE {
|
|
swL2TrunkVLANPort
|
|
INTEGER,
|
|
swL2TrunkVLANState
|
|
INTEGER
|
|
}
|
|
|
|
swL2TrunkVLANPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port being configured."
|
|
::= { swL2TrunkVLANEntry 1 }
|
|
|
|
swL2TrunkVLANState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the logical port LACP."
|
|
::= { swL2TrunkVLANEntry 2 }
|
|
|
|
-- **************************************************************************
|
|
-- swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
|
|
-- **************************************************************************
|
|
|
|
swL2MirrorLogicTargetPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates switch which port will sniff another
|
|
port. A trunk port member cannot be configured as a target
|
|
Snooping port. The port number is the sequential (logical)
|
|
number which is also applied to bridge MIB, etc."
|
|
::= { swL2MirrorMgmt 1 }
|
|
|
|
swL2MirrorPortSourceIngress OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The represent the ingress into the source port packet to
|
|
sniffed."
|
|
::= { swL2MirrorMgmt 2 }
|
|
|
|
swL2MirrorPortSourceEgress OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The represent the egress from the source port packet to
|
|
sniffed."
|
|
::= { swL2MirrorMgmt 3 }
|
|
|
|
swL2MirrorPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port mirroring state.
|
|
|
|
other(1) - this entry is currently in use but the conditions
|
|
under which it will remain so are different from each of the
|
|
following values.
|
|
disabled(2) - writing this value to the object, and then the
|
|
corresponding entry will be removed from the table.
|
|
enabled(3) - this entry is reside in the table."
|
|
::= { swL2MirrorMgmt 4 }
|
|
|
|
swL2MirrorGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2MirrorGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies information about the Mirror group configuration."
|
|
::= { swL2MirrorMgmt 5 }
|
|
|
|
swL2MirrorGroupEntry OBJECT-TYPE
|
|
SYNTAX SwL2MirrorGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information about each Mirror group configuration."
|
|
INDEX { swL2MirrorGroupID }
|
|
::= { swL2MirrorGroupTable 1 }
|
|
|
|
SwL2MirrorGroupEntry ::=
|
|
SEQUENCE {
|
|
swL2MirrorGroupID
|
|
INTEGER,
|
|
swL2MirrorGroupRowStatus
|
|
RowStatus,
|
|
swL2MirrorGroupState
|
|
INTEGER,
|
|
swL2MirrorGroupLogicTargetPort
|
|
INTEGER,
|
|
swL2MirrorGroupPortSourceIngress
|
|
PortList,
|
|
swL2MirrorGroupPortSourceEngress
|
|
PortList
|
|
}
|
|
|
|
swL2MirrorGroupID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the mirror group.
|
|
The range of this object is (1..n),
|
|
the value of n depends on detail project.
|
|
"
|
|
::= { swL2MirrorGroupEntry 1 }
|
|
|
|
swL2MirrorGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object manages this mirror group entry."
|
|
::= { swL2MirrorGroupEntry 2 }
|
|
|
|
swL2MirrorGroupState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the mirror group state."
|
|
::= { swL2MirrorGroupEntry 3 }
|
|
|
|
swL2MirrorGroupLogicTargetPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the mirror group target port."
|
|
::= { swL2MirrorGroupEntry 4 }
|
|
|
|
swL2MirrorGroupPortSourceIngress OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the mirror group ingress source ports."
|
|
::= { swL2MirrorGroupEntry 5 }
|
|
|
|
swL2MirrorGroupPortSourceEngress OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the mirror group engress source ports."
|
|
::= { swL2MirrorGroupEntry 6 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
|
|
-- ********************************************************************
|
|
|
|
swL2IGMPMaxSupportedVlans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of Vlans in the layer 2 IGMP control table
|
|
(swL2IGMPCtrlTable)."
|
|
::= { swL2IGMPMgmt 1 }
|
|
|
|
swL2IGMPMaxIpGroupNumPerVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of multicast ip group per Vlan in the layer 2
|
|
IGMP information table (swL2IGMPQueryInfoTable)."
|
|
::= { swL2IGMPMgmt 2 }
|
|
|
|
-- swL2IGMPLastQueryIPAddr OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the ip address of last send IGMP query
|
|
-- packet."
|
|
-- ::= { swL2IGMPMgmt 3 }
|
|
|
|
swL2IGMPCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table controls the Vlan's IGMP function. Its scale depends
|
|
on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled
|
|
mode, there is only one entry in the table, with index 1. If
|
|
VLAN is in Port-Base or 802.1q mode, the number of entries can
|
|
be up to 12, with index range from 1 to 12."
|
|
::= { swL2IGMPMgmt 3 }
|
|
|
|
swL2IGMPCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry in IGMP control table (swL2IGMPCtrlTable). The entry
|
|
is effective only when IGMP capture switch
|
|
(swL2DevCtrlIGMPSnooping) is enabled."
|
|
INDEX { swL2IGMPCtrlVid }
|
|
::= { swL2IGMPCtrlTable 1 }
|
|
|
|
SwL2IGMPCtrlEntry ::=
|
|
SEQUENCE {
|
|
-- swL2IGMPCtrlIndex
|
|
-- INTEGER,
|
|
swL2IGMPCtrlVid
|
|
INTEGER,
|
|
swL2IGMPQueryInterval
|
|
INTEGER,
|
|
swL2IGMPMaxResponseTime
|
|
INTEGER,
|
|
swL2IGMPRobustness
|
|
INTEGER,
|
|
swL2IGMPLastMemberQueryInterval
|
|
INTEGER,
|
|
swL2IGMPHostTimeout
|
|
INTEGER,
|
|
swL2IGMPRouteTimeout
|
|
INTEGER,
|
|
swL2IGMPLeaveTimer
|
|
INTEGER,
|
|
swL2IGMPQueryState
|
|
INTEGER,
|
|
swL2IGMPCurrentState
|
|
INTEGER,
|
|
swL2IGMPCtrlState
|
|
INTEGER,
|
|
swL2IGMPFastLeaveState
|
|
INTEGER,
|
|
swL2IGMPQueryVersion
|
|
INTEGER,
|
|
swL2IGMPReportSuppression
|
|
INTEGER,
|
|
swL2IGMPDataDrivenLearningState
|
|
INTEGER,
|
|
swL2IGMPDataDrivenLearningAgedOutState
|
|
INTEGER,
|
|
swL2IGMPDataDrivenGroupExpiryTime
|
|
INTEGER
|
|
}
|
|
|
|
-- swL2IGMPCtrlIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..12)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the IGMP control entry number.Its scale
|
|
-- depends on current VLAN state (swL2VlanInfoStatus). If VLAN is
|
|
-- disabled, there is only one entry in the table, with index 1.
|
|
-- If VLAN is in Port-Base or 802.1q mode, the number of entries
|
|
-- is 12, with index range from 1 to 12."
|
|
-- ::= { swL2IGMPCtrlEntry 1 }
|
|
|
|
swL2IGMPCtrlVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IGMP control entry's VLAN id. If VLAN
|
|
is disabled, the Vid is always 0 and cannot be changed by
|
|
management users. If VLAN is in Port-Base mode, the Vid is
|
|
arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode,
|
|
the Vid setting can vary from 1 to 4094 by management user, and
|
|
the Vid in each entry must be unique in the IGMP Control Table."
|
|
::= { swL2IGMPCtrlEntry 1 }
|
|
|
|
swL2IGMPQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency at which IGMP Host-Query packets are
|
|
transmitted on this switch."
|
|
DEFVAL { 125 }
|
|
::= { swL2IGMPCtrlEntry 2 }
|
|
|
|
swL2IGMPMaxResponseTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..25)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum query response time on this switch."
|
|
DEFVAL { 10 }
|
|
::= { swL2IGMPCtrlEntry 3 }
|
|
|
|
swL2IGMPRobustness OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Robustness Variable allows tuning for the expected
|
|
packet loss on a subnet. If a subnet is expected to be
|
|
lossy, the Robustness Variable may be increased. IGMP is
|
|
robust to (Robustness Variable-1) packet losses."
|
|
DEFVAL { 2 }
|
|
::= { swL2IGMPCtrlEntry 4 }
|
|
|
|
swL2IGMPLastMemberQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..25)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Last Member Query Interval is the Max Response Time
|
|
inserted into Group-Specific Queries sent in response to
|
|
Leave Group messages, and is also the amount of time between
|
|
Group-Specific Query messages."
|
|
DEFVAL { 1 }
|
|
::= { swL2IGMPCtrlEntry 5 }
|
|
|
|
swL2IGMPHostTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16711450)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timer value for sending IGMP query packet when none was
|
|
sent by the host in the LAN. The timer works in per-VLAN basis.
|
|
Our device will be activated to send the query message if the
|
|
timer is expired. Please reference RFC2236-1997."
|
|
DEFVAL { 260 }
|
|
::= { swL2IGMPCtrlEntry 6 }
|
|
|
|
swL2IGMPRouteTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16711450)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router Timeout is how long a host must wait after hearing
|
|
a Query before it may send any IGMPv2 messages."
|
|
DEFVAL { 260 }
|
|
::= { swL2IGMPCtrlEntry 7 }
|
|
|
|
swL2IGMPLeaveTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16711450)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When a querier receives a Leave Group message for a group that
|
|
has group members on the reception interface, it sends
|
|
Group-Specific Queries every swL2IGMPLeaveTimer to the group
|
|
being left."
|
|
DEFVAL { 1 }
|
|
::= { swL2IGMPCtrlEntry 8 }
|
|
|
|
swL2IGMPQueryState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decide the IGMP query enabled or disabled."
|
|
::= { swL2IGMPCtrlEntry 9 }
|
|
|
|
swL2IGMPCurrentState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
querier(2),
|
|
non-querier(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the current IGMP query state."
|
|
::= { swL2IGMPCtrlEntry 10 }
|
|
|
|
swL2IGMPCtrlState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
|
|
other(1) - this entry is currently in use but the conditions under
|
|
which it will remain so are different from each of the following
|
|
values.
|
|
disable(2) - IGMP funtion is disabled for this entry.
|
|
enable(3) - IGMP funtion is enabled for this entry."
|
|
::= { swL2IGMPCtrlEntry 11 }
|
|
|
|
swL2IGMPFastLeaveState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the fast_leave status of this entry.
|
|
|
|
other(1) - this entry is currently in use but the conditions under
|
|
which it will remain so are different from each of the following
|
|
values.
|
|
disable(2) - IGMP fast-leave funtion is disabled for this entry.
|
|
enable(3) - IGMP fast-leave funtion is enabled for this entry."
|
|
::= { swL2IGMPCtrlEntry 12 }
|
|
|
|
swL2IGMPQueryVersion OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the IGMP version of query packet which will be sent by the router."
|
|
::= { swL2IGMPCtrlEntry 13 }
|
|
|
|
swL2IGMPReportSuppression OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, multiple IGMP reports or leaves for a specific group (S,G)
|
|
will be integrated into only one report before being sent to the router
|
|
port."
|
|
::= { swL2IGMPCtrlEntry 15 }
|
|
|
|
swL2IGMPDataDrivenLearningState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Data Driven Learning State of this VLAN."
|
|
::= { swL2IGMPCtrlEntry 16 }
|
|
|
|
swL2IGMPDataDrivenLearningAgedOutState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Data Driven Learning Aged Out State of this VLAN."
|
|
::= { swL2IGMPCtrlEntry 17 }
|
|
|
|
swL2IGMPDataDrivenGroupExpiryTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Data Driven Group Expiry Time of this VLAN."
|
|
::= { swL2IGMPCtrlEntry 18 }
|
|
|
|
|
|
swL2IGMPQueryInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPQueryInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains the number current IGMP query packets which
|
|
is captured by this device, as well as the IGMP query packets
|
|
sent by the device."
|
|
::= { swL2IGMPMgmt 4 }
|
|
|
|
swL2IGMPQueryInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPQueryInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about current IGMP query information, provided that
|
|
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
|
|
entry are all enabled."
|
|
INDEX { swL2IGMPInfoVid }
|
|
::= { swL2IGMPQueryInfoTable 1 }
|
|
|
|
SwL2IGMPQueryInfoEntry ::=
|
|
SEQUENCE {
|
|
-- swL2IGMPInfoIndex
|
|
-- INTEGER,
|
|
swL2IGMPInfoVid
|
|
INTEGER,
|
|
swL2IGMPInfoQueryCount
|
|
INTEGER,
|
|
swL2IGMPInfoTxQueryCount
|
|
INTEGER
|
|
}
|
|
|
|
-- swL2IGMPInfoIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..12)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the IGMP query information entry
|
|
-- number. It could be up to 12 entries, depending on current
|
|
-- number of VLAN entries."
|
|
-- ::= { swL2IGMPQueryInfoEntry 1 }
|
|
|
|
swL2IGMPInfoVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Vid of associated IGMP info table
|
|
entry. It follows swL2IGMPCtrlVid in the associated entry of
|
|
IGMP control table (swL2IGMPCtrlTable)."
|
|
::= { swL2IGMPQueryInfoEntry 1 }
|
|
|
|
swL2IGMPInfoQueryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of query packets received
|
|
since the IGMP function enabled, in per-VLAN basis."
|
|
::= { swL2IGMPQueryInfoEntry 2 }
|
|
|
|
swL2IGMPInfoTxQueryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the send count of IGMP query messages, in
|
|
per-VLAN basis. In case of IGMP timer expiration, the switch
|
|
sends IGMP query packets to related VLAN member ports and
|
|
increment this object by 1."
|
|
::= { swL2IGMPQueryInfoEntry 3 }
|
|
|
|
swL2IGMPInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table containing current IGMP information which captured by
|
|
this device, provided that swL2DevCtrlIGMPSnooping and
|
|
swL2IGMPCtrlState of associated VLAN entry are all enabled. Note
|
|
that the priority of IGMP table entries is lower than Filtering
|
|
Table, i.e. if there is a table hash collision between the
|
|
entries of IGMP Table and Filtering Table inside the switch H/W
|
|
address table, then Filtering Table entry overwrite the
|
|
colliding entry of IGMP Table. See swL2FilterMgmt description
|
|
also."
|
|
::= { swL2IGMPMgmt 5 }
|
|
|
|
swL2IGMPInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about current IGMP information which captured by
|
|
this device, provided that swL2DevCtrlIGMPSnooping and
|
|
swL2IGMPCtrlState of associated VLAN entry are all enabled."
|
|
INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr }
|
|
::= { swL2IGMPInfoTable 1 }
|
|
|
|
SwL2IGMPInfoEntry ::=
|
|
SEQUENCE {
|
|
swL2IGMPVid
|
|
INTEGER,
|
|
swL2IGMPGroupIpAddr
|
|
IpAddress,
|
|
swL2IGMPMacAddr
|
|
MacAddress,
|
|
swL2IGMPPortMap
|
|
PortList,
|
|
swL2IGMPIpGroupReportCount
|
|
INTEGER
|
|
}
|
|
|
|
swL2IGMPVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Vid of individual IGMP table entry.
|
|
It shows the Vid of IGMP report information captured on
|
|
network."
|
|
::= { swL2IGMPInfoEntry 1 }
|
|
|
|
swL2IGMPGroupIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is identify group ip address which is captured from
|
|
IGMP packet, in per-Vlan basis."
|
|
::= { swL2IGMPInfoEntry 2 }
|
|
|
|
swL2IGMPMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is identify mac address which is corresponding
|
|
to swL2IGMPGroupIpAddr, in per-Vlan basis."
|
|
::= { swL2IGMPInfoEntry 3 }
|
|
|
|
swL2IGMPPortMap OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates which ports are belong to the same
|
|
multicast group, in per-Vlan basis. Each multicast group has a
|
|
octect string to indicate with port map. The most significant
|
|
bit represents the lowest numbered port, and the least
|
|
significant bit represents the highest numbered port. Thus, each
|
|
port of the switch is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1' then that
|
|
port is included in the set of ports; the port is not included
|
|
if its bit has a value of '0'(Note that the setting of the bit
|
|
corresponding to the port from which a frame is received is
|
|
irrelevant). The 4 octets is represent one unit port according
|
|
its logic port. If the unit less 32 port, the other port don't
|
|
care just fill zero."
|
|
::= { swL2IGMPInfoEntry 4 }
|
|
|
|
swL2IGMPIpGroupReportCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicate how much report packet was receive by our
|
|
device corresponding with this entry from IGMP function enabled,
|
|
in per-Vlan basis."
|
|
::= { swL2IGMPInfoEntry 5 }
|
|
|
|
-- ****************************************************************************************
|
|
-- swL2IGMPRouterPortsTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 6 }
|
|
-- ****************************************************************************************
|
|
swL2IGMPRouterPortsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPRouterPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table controls the Vlan's IGMP router ports function."
|
|
::= { swL2IGMPMgmt 6 }
|
|
|
|
swL2IGMPRouterPortsEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPRouterPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry in IGMP router ports table (swL2IGMPRouterPortsTable)."
|
|
INDEX { swL2IGMPRouterPortsVid }
|
|
::= { swL2IGMPRouterPortsTable 1 }
|
|
|
|
SwL2IGMPRouterPortsEntry ::=
|
|
SEQUENCE {
|
|
swL2IGMPRouterPortsVid
|
|
INTEGER,
|
|
swL2IGMPRouterStaticPortList
|
|
PortList,
|
|
swL2IGMPRouterDynamicPortList
|
|
PortList,
|
|
swL2IGMPRouterForbiddenPortList
|
|
PortList
|
|
}
|
|
|
|
swL2IGMPRouterPortsVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IGMP router ports entry's VLAN id. If VLAN
|
|
is disabled, the Vid is always 0 and cannot be changed by
|
|
management users. If VLAN is in Port-Base mode, the Vid is
|
|
arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode,
|
|
the Vid setting can vary from 1 to 4094 by management user, and
|
|
the Vid in each entry must be unique in the IGMP ports Table."
|
|
::= { swL2IGMPRouterPortsEntry 1 }
|
|
|
|
swL2IGMPRouterStaticPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { swL2IGMPRouterPortsEntry 2 }
|
|
|
|
swL2IGMPRouterDynamicPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { swL2IGMPRouterPortsEntry 3 }
|
|
|
|
swL2IGMPRouterForbiddenPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { swL2IGMPRouterPortsEntry 4 }
|
|
|
|
|
|
-- ****************************************************************************************
|
|
-- swIGMPSnoopingGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 11 }
|
|
-- ****************************************************************************************
|
|
|
|
swIGMPSnoopingGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwIGMPSnoopingGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains the current IGMP snooping group information captured by
|
|
the device."
|
|
::= { swL2IGMPMgmt 11 }
|
|
|
|
swIGMPSnoopingGroupEntry OBJECT-TYPE
|
|
SYNTAX SwIGMPSnoopingGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about the current IGMP snooping group information which has been captured by
|
|
the device."
|
|
INDEX { swIGMPSnoopingGroupVid , swIGMPSnoopingGroupGroupAddr , swIGMPSnoopingGroupSourceAddr}
|
|
::= { swIGMPSnoopingGroupTable 1 }
|
|
|
|
SwIGMPSnoopingGroupEntry ::=
|
|
SEQUENCE {
|
|
swIGMPSnoopingGroupVid
|
|
INTEGER,
|
|
swIGMPSnoopingGroupGroupAddr
|
|
IpAddress,
|
|
swIGMPSnoopingGroupSourceAddr
|
|
IpAddress,
|
|
swIGMPSnoopingGroupIncludePortMap
|
|
PortList,
|
|
swIGMPSnoopingGroupExcludePortMap
|
|
PortList
|
|
}
|
|
|
|
swIGMPSnoopingGroupVid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the VID of the individual IGMP snooping group table entry."
|
|
::= { swIGMPSnoopingGroupEntry 1 }
|
|
|
|
swIGMPSnoopingGroupGroupAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the group IP address which have been captured from
|
|
the IGMP packet, on a per-VLAN basis."
|
|
::= { swIGMPSnoopingGroupEntry 2 }
|
|
|
|
swIGMPSnoopingGroupSourceAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the source addresses."
|
|
::= { swIGMPSnoopingGroupEntry 3 }
|
|
|
|
swIGMPSnoopingGroupIncludePortMap OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port list under INCLUDE mode."
|
|
::= { swIGMPSnoopingGroupEntry 4 }
|
|
|
|
swIGMPSnoopingGroupExcludePortMap OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port list under EXCLUDE mode."
|
|
::= { swIGMPSnoopingGroupEntry 5 }
|
|
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2IGMPMulticastVlanTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 7 }
|
|
-- ********************************************************************
|
|
swL2IGMPMulticastVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information of the IGMP snooping multicast VLAN table."
|
|
::={swL2IGMPMgmt 7}
|
|
|
|
swL2IGMPMulticastVlanEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPMulticastVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of swL2IGMPMulticastVlanTable."
|
|
INDEX { swL2IGMPMulticastVlanid}
|
|
::= { swL2IGMPMulticastVlanTable 1 }
|
|
|
|
SwL2IGMPMulticastVlanEntry ::=
|
|
SEQUENCE {
|
|
swL2IGMPMulticastVlanid
|
|
INTEGER,
|
|
swL2IGMPMulticastVlanName
|
|
DisplayString,
|
|
swL2IGMPMulticastVlanSourcePort
|
|
PortList,
|
|
swL2IGMPMulticastVlanMemberPort
|
|
PortList,
|
|
swL2IGMPMulticastVlanTagMemberPort
|
|
PortList,
|
|
swL2IGMPMulticastVlanState
|
|
INTEGER,
|
|
swL2IGMPMulticastVlanReplaceSourceIp
|
|
IpAddress,
|
|
swL2IGMPMulticastVlanRowStatus
|
|
RowStatus,
|
|
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction
|
|
INTEGER,
|
|
swL2IGMPMulticastVlanUntagSourcePort
|
|
PortList,
|
|
swL2IGMPMulticastVlanRemapPriority
|
|
INTEGER,
|
|
swL2IGMPMulticastVlanReplacePriority
|
|
INTEGER
|
|
}
|
|
|
|
swL2IGMPMulticastVlanid OBJECT-TYPE
|
|
SYNTAX INTEGER (2..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the VLAN ID of the IGMP snooping multicast
|
|
VLAN entry."
|
|
::= { swL2IGMPMulticastVlanEntry 1 }
|
|
|
|
swL2IGMPMulticastVlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the VLAN name of the IGMP snooping multicast
|
|
VLAN entry."
|
|
::= { swL2IGMPMulticastVlanEntry 2 }
|
|
|
|
swL2IGMPMulticastVlanSourcePort OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicate the portlist of the source ports of IGMP
|
|
snooping multicast VLAN. The source ports will be set as tag ports
|
|
of the VLAN entry. And the IGMP control messages received from the
|
|
member ports would be forwarded to the source ports. "
|
|
::= { swL2IGMPMulticastVlanEntry 3 }
|
|
|
|
swL2IGMPMulticastVlanMemberPort OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicate the portlist of the member ports of the IGMP
|
|
snooping multicast VLAN. The source ports will be set as untagged ports
|
|
of the VLAN entry. And the IGMP control messages received from the
|
|
member ports would be forwarded to the source ports. "
|
|
::= { swL2IGMPMulticastVlanEntry 4 }
|
|
|
|
swL2IGMPMulticastVlanTagMemberPort OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicate the portlist of the tag member ports of IGMP
|
|
snooping multicast VLAN."
|
|
::= { swL2IGMPMulticastVlanEntry 5 }
|
|
|
|
swL2IGMPMulticastVlanState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object can be enabled or disabled IGMP_snooping multicast VLAN."
|
|
::= { swL2IGMPMulticastVlanEntry 6 }
|
|
|
|
swL2IGMPMulticastVlanReplaceSourceIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The replace source IP of this multicast vlan."
|
|
::= { swL2IGMPMulticastVlanEntry 7 }
|
|
|
|
swL2IGMPMulticastVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { swL2IGMPMulticastVlanEntry 8 }
|
|
|
|
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
start(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if remove all the multicast address
|
|
list from the IGMP multicast VLAN or not."
|
|
::= { swL2IGMPMulticastVlanEntry 9 }
|
|
|
|
swL2IGMPMulticastVlanUntagSourcePort OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the untagged member ports to add to the multicast VLAN."
|
|
::={ swL2IGMPMulticastVlanEntry 10}
|
|
|
|
swL2IGMPMulticastVlanRemapPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value (0 to 7) to be associated with the data traffic
|
|
to be forwarded on the multicast VLAN.
|
|
When set to 8, the packet's original priority will be used."
|
|
DEFVAL {8}
|
|
::={ swL2IGMPMulticastVlanEntry 11}
|
|
|
|
swL2IGMPMulticastVlanReplacePriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies that a packet's priority will be changed by the switch
|
|
based on the remap priority. This flag will only take effect
|
|
when remap priority is set."
|
|
::={ swL2IGMPMulticastVlanEntry 12}
|
|
|
|
-- ********************************************************************
|
|
-- swL2IGMPMulticastVlanGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 8 }
|
|
-- -----------------------------------------------------------------------------
|
|
swL2IGMPMulticastVlanGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table containing the IGMP snooping multicast VLAN group information"
|
|
::= { swL2IGMPMgmt 8 }
|
|
|
|
swL2IGMPMulticastVlanGroupEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPMulticastVlanGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about current IGMP snooping multicast VLAN group."
|
|
INDEX { swL2IGMPMulticastVlanGroupVid,swL2IGMPMulticastVlanGroupFromIp,swL2IGMPMulticastVlanGroupToIp }
|
|
::= { swL2IGMPMulticastVlanGroupTable 1 }
|
|
|
|
SwL2IGMPMulticastVlanGroupEntry ::=
|
|
SEQUENCE {
|
|
swL2IGMPMulticastVlanGroupVid
|
|
INTEGER,
|
|
swL2IGMPMulticastVlanGroupFromIp
|
|
IpAddress,
|
|
swL2IGMPMulticastVlanGroupToIp
|
|
IpAddress,
|
|
swL2IGMPMulticastVlanGroupStatus
|
|
RowStatus
|
|
}
|
|
|
|
swL2IGMPMulticastVlanGroupVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Vid of IGMP snooping multicast VLAN group."
|
|
::= { swL2IGMPMulticastVlanGroupEntry 1 }
|
|
|
|
swL2IGMPMulticastVlanGroupFromIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the multicast address list for this VLAN."
|
|
::= { swL2IGMPMulticastVlanGroupEntry 2 }
|
|
|
|
swL2IGMPMulticastVlanGroupToIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the multicast address list for this VLAN."
|
|
::= { swL2IGMPMulticastVlanGroupEntry 3 }
|
|
|
|
swL2IGMPMulticastVlanGroupStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { swL2IGMPMulticastVlanGroupEntry 4 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2IGMPSnoopingStaticGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 16 }
|
|
-- -----------------------------------------------------------------------------
|
|
swL2IGMPSnoopingStaticGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPSnoopingStaticGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains the current IGMP snooping static group information captured by
|
|
the device."
|
|
::= { swL2IGMPMgmt 16 }
|
|
|
|
swL2IGMPSnoopingStaticGroupEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPSnoopingStaticGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about current IGMP snooping static group information captured by
|
|
the device."
|
|
INDEX { swL2IGMPSnoopingStaticGroupVID , swL2IGMPSnoopingStaticGroupIPaddress}
|
|
::= { swL2IGMPSnoopingStaticGroupTable 1 }
|
|
|
|
SwL2IGMPSnoopingStaticGroupEntry ::=
|
|
SEQUENCE {
|
|
swL2IGMPSnoopingStaticGroupVID
|
|
INTEGER,
|
|
swL2IGMPSnoopingStaticGroupIPaddress
|
|
IpAddress,
|
|
swL2IGMPSnoopingStaticGroupMemberPortList
|
|
PortList,
|
|
swL2IGMPSnoopingStaticGroupRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
swL2IGMPSnoopingStaticGroupVID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the VID of the current IGMP snooping static group."
|
|
::= { swL2IGMPSnoopingStaticGroupEntry 1 }
|
|
|
|
swL2IGMPSnoopingStaticGroupIPaddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the current IGMP snooping static group IP address. "
|
|
::= { swL2IGMPSnoopingStaticGroupEntry 2 }
|
|
|
|
swL2IGMPSnoopingStaticGroupMemberPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the current IGMP snooping static group Member Portlist. "
|
|
::= { swL2IGMPSnoopingStaticGroupEntry 3 }
|
|
|
|
swL2IGMPSnoopingStaticGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::={swL2IGMPSnoopingStaticGroupEntry 4}
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- swL2IGMPSnoopingDataDrivenLearningGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 20 }
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
swL2IGMPSnoopingDataDrivenLearningGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPSnoopingDataDrivenLearningGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table controls the VLAN's IGMP Snooping data driven learning group function."
|
|
::= { swL2IGMPMgmt 20 }
|
|
|
|
swL2IGMPSnoopingDataDrivenLearningGroupEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPSnoopingDataDrivenLearningGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an entry of the swL2IGMPSnoopingDataDrivenLearningGroupTable."
|
|
INDEX { swL2IGMPSnoopingDataDrivenLearningGrpVID , swL2IGMPSnoopingDataDrivenLearningGrpGrpAddr}
|
|
::= { swL2IGMPSnoopingDataDrivenLearningGroupTable 1 }
|
|
|
|
SwL2IGMPSnoopingDataDrivenLearningGroupEntry ::=
|
|
SEQUENCE {
|
|
swL2IGMPSnoopingDataDrivenLearningGrpVID
|
|
INTEGER,
|
|
swL2IGMPSnoopingDataDrivenLearningGrpGrpAddr
|
|
IpAddress,
|
|
swL2IGMPSnoopingDataDrivenLearningGrpRouterPorts
|
|
PortList,
|
|
swL2IGMPSnoopingDataDrivenLearningGrpClearGrp
|
|
INTEGER
|
|
}
|
|
|
|
swL2IGMPSnoopingDataDrivenLearningGrpVID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the VID of the current IGMP snooping static group."
|
|
::= { swL2IGMPSnoopingDataDrivenLearningGroupEntry 1 }
|
|
|
|
swL2IGMPSnoopingDataDrivenLearningGrpGrpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the group address of the IGMP snooping data driven learning group table."
|
|
::= { swL2IGMPSnoopingDataDrivenLearningGroupEntry 2 }
|
|
|
|
swL2IGMPSnoopingDataDrivenLearningGrpRouterPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the router port list of the IGMP snooping data driven learning group table."
|
|
::= { swL2IGMPSnoopingDataDrivenLearningGroupEntry 3 }
|
|
|
|
swL2IGMPSnoopingDataDrivenLearningGrpClearGrp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1),
|
|
clear(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to clear, this data driven learning group will be deleted."
|
|
::= { swL2IGMPSnoopingDataDrivenLearningGroupEntry 100 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
|
|
-- ********************************************************************
|
|
|
|
-- swL2TrafficCtrlTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2TrafficCtrlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table specifys the storm traffic control configuration."
|
|
-- ::= { swL2TrafficMgmt 1 }
|
|
|
|
-- swL2TrafficCtrlEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2TrafficCtrlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of information specifies the storm traffic control
|
|
-- configuration."
|
|
-- INDEX { swL2TrafficCtrlGroupIndex }
|
|
-- ::= { swL2TrafficCtrlTable 1 }
|
|
|
|
-- SwL2TrafficCtrlEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2TrafficCtrlGroupIndex
|
|
-- INTEGER,
|
|
-- swL2TrafficCtrlUnitIndex
|
|
-- INTEGER,
|
|
-- swL2TrafficCtrlBcastStromCtrl
|
|
-- INTEGER,
|
|
-- swL2TrafficCtrlMcastStromCtrl
|
|
-- INTEGER,
|
|
-- swL2TrafficCtrlDlfStromCtrl
|
|
-- INTEGER,
|
|
-- swL2TrafficCtrlBMStromthreshold
|
|
-- INTEGER,
|
|
-- swL2TrafficCtrlBMStromAction
|
|
-- INTEGER,
|
|
-- swL2TrafficCtrlBMStromBackOff
|
|
-- INTEGER,
|
|
-- swL2TrafficCtrlBMStromTimeInterval
|
|
-- INTEGER
|
|
-- }
|
|
|
|
-- swL2TrafficCtrlGroupIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The index of logical port trunk. The trunk group number depend
|
|
-- on the existence of unit and module."
|
|
-- ::= { swL2TrafficCtrlEntry 1 }
|
|
|
|
-- swL2TrafficCtrlUnitIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates ID of the unit in the device"
|
|
-- ::= { swL2TrafficCtrlEntry 2 }
|
|
|
|
-- swL2TrafficCtrlBcastStromCtrl OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates broadcast storm control function is
|
|
-- enabled or disabled."
|
|
-- ::= { swL2TrafficCtrlEntry 3 }
|
|
|
|
-- swL2TrafficCtrlMcastStromCtrl OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates multicast storm control function is
|
|
-- enabled or disabled."
|
|
-- ::= { swL2TrafficCtrlEntry 4 }
|
|
|
|
-- swL2TrafficCtrlDlfStromCtrl OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates destination lookup fail function is
|
|
-- enabled or disabled."
|
|
-- ::= { swL2TrafficCtrlEntry 5 }
|
|
|
|
-- swL2TrafficCtrlBMStromthreshold OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object to decide how much thousand packets per second
|
|
-- broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl,
|
|
-- swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlDlfStromCtrl
|
|
-- objects whether is enabled) will active storm control. Whenever
|
|
-- a port reaches its configured amount of packets in the one
|
|
-- second time interval, the device will start dropping that type
|
|
-- of packet, until the time interval has expired. Once the time
|
|
-- interval has expired, the device will start forwarding that type
|
|
-- of packet."
|
|
-- ::= { swL2TrafficCtrlEntry 6 }
|
|
|
|
-- swL2TrafficCtrlBMStromAction OBJECT-TYPE
|
|
-- SYNTAX INTEGER{
|
|
-- drop(1),
|
|
-- shutDown(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Drop: HW storm control . shutdown: SW storm control"
|
|
-- ::= { swL2TrafficCtrlEntry 7}
|
|
|
|
-- swL2TrafficCtrlBMStromBackOff OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..10)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Timer for softeware. After a port is disabled, the receiving rate
|
|
-- definitely declines very quickly, after this time expire , sw will
|
|
-- enable port . Zero will disable port for ever . After 6 times , port
|
|
-- will be disabled for ever"
|
|
-- ::= { swL2TrafficCtrlEntry 8 }
|
|
|
|
-- swL2TrafficCtrlBMStromTimeInterval OBJECT-TYPE
|
|
-- SYNTAX INTEGER (5..30)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Timer for softeware. For monitor rx rate."
|
|
-- ::= { swL2TrafficCtrlEntry 9 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
|
|
-- ********************************************************************
|
|
swL2TrafficSegTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrafficSegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifys the port just can forward traffic to the
|
|
specific port list."
|
|
::= { swL2TrafficSegMgmt 1 }
|
|
|
|
swL2TrafficSegEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrafficSegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information specifies the port with its traffic
|
|
forward list."
|
|
INDEX { swL2TrafficSegPort }
|
|
::= { swL2TrafficSegTable 1 }
|
|
|
|
SwL2TrafficSegEntry ::=
|
|
SEQUENCE {
|
|
swL2TrafficSegPort
|
|
INTEGER,
|
|
swL2TrafficSegForwardPorts
|
|
PortList
|
|
}
|
|
|
|
swL2TrafficSegPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the logical port."
|
|
::= { swL2TrafficSegEntry 1 }
|
|
|
|
swL2TrafficSegForwardPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port list that the specific port can forward traffic."
|
|
::= { swL2TrafficSegEntry 2 }
|
|
|
|
--************************************************************
|
|
--swL2IpLimitedMulticastMgmt OBJECT IDENTIFIER::= { swL2MgmtMIB 15 }
|
|
--************************************************************
|
|
|
|
|
|
swL2IpLimitedMulticastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IpLimitedMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entity's per-port Limited IP multicast address range table."
|
|
::= { swL2IpLimitedMulticastMgmt 1 }
|
|
|
|
swL2IpLimitedMulticastEntry OBJECT-TYPE
|
|
SYNTAX SwL2IpLimitedMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A particular route to a particular destination, under a particular policy.
|
|
Once an entry be built,it shouldn't be modified.That is,it just support create and
|
|
delete action."
|
|
INDEX {
|
|
swL2IpLimitedMulticastPortIndex
|
|
}
|
|
::= { swL2IpLimitedMulticastTable 1 }
|
|
|
|
SwL2IpLimitedMulticastEntry ::=
|
|
SEQUENCE {
|
|
swL2IpLimitedMulticastPortIndex
|
|
INTEGER,
|
|
swL2IpLimitedMulticastHead
|
|
IpAddress,
|
|
swL2IpLimitedMulticastTail
|
|
IpAddress,
|
|
swL2IpLimitedMulticastAccess
|
|
INTEGER,
|
|
swL2IpLimitedMulticastState
|
|
INTEGER,
|
|
swL2IpLimitedMulticastDelState
|
|
INTEGER
|
|
}
|
|
swL2IpLimitedMulticastPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A port to config the limited multicast address."
|
|
::= { swL2IpLimitedMulticastEntry 1 }
|
|
|
|
swL2IpLimitedMulticastHead OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The head of multicast address range."
|
|
::= { swL2IpLimitedMulticastEntry 2 }
|
|
|
|
swL2IpLimitedMulticastTail OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tail of multicast address range."
|
|
::= { swL2IpLimitedMulticastEntry 3 }
|
|
|
|
swL2IpLimitedMulticastAccess OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
none(0),
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It allow you to permit or deny multicast range."
|
|
::= { swL2IpLimitedMulticastEntry 4 }
|
|
|
|
swL2IpLimitedMulticastState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable limited multicast address for the chosen portlist."
|
|
::= { swL2IpLimitedMulticastEntry 5 }
|
|
|
|
swL2IpLimitedMulticastDelState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable delete limited multicast address for the chosen portlist."
|
|
::= { swL2IpLimitedMulticastEntry 6 }
|
|
|
|
-- ******************************************************************************************
|
|
-- swL2VlanMgmt OBJECT IDENTIFIER::= { swL2MgmtMIB 17 }
|
|
-- *****************************************************************************************
|
|
swL2VlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2VlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing current configuration information
|
|
for each VLAN currently configured into the device by
|
|
(local or network) management, or dynamically created
|
|
as a result of GVRP requests received."
|
|
::= { swL2VlanMgmt 1 }
|
|
|
|
swL2VlanEntry OBJECT-TYPE
|
|
SYNTAX SwL2VlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information for a VLAN configured into the device by
|
|
(local or network) management, or dynamically created
|
|
as a result of GVRP requests received."
|
|
INDEX {swL2VlanIndex }
|
|
::= { swL2VlanTable 1 }
|
|
|
|
SwL2VlanEntry ::=
|
|
SEQUENCE {
|
|
swL2VlanIndex
|
|
VlanId,
|
|
swL2VlanName
|
|
DisplayString,
|
|
swL2VlanType
|
|
INTEGER,
|
|
swL2VlanMemberPorts
|
|
PortList,
|
|
swL2VlanStaticPorts
|
|
PortList,
|
|
swL2VlanStaticTaggedPorts
|
|
PortList,
|
|
swL2VlanStaticUntaggedPorts
|
|
PortList,
|
|
swL2VlanForbiddenPorts
|
|
PortList,
|
|
swL2VlanCurrentTaggedPorts
|
|
PortList,
|
|
swL2VlanCurrentUntaggedPorts
|
|
PortList,
|
|
swL2VlanAdvertisementState
|
|
INTEGER
|
|
}
|
|
|
|
swL2VlanIndex OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of the VLAN to be created. The range is 1 - 4094."
|
|
::= { swL2VlanEntry 1 }
|
|
|
|
swL2VlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the VLAN to be displayed."
|
|
::= { swL2VlanEntry 2 }
|
|
|
|
swL2VlanType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
invalid-vlan-type(0),
|
|
static-1q-vlan(1),
|
|
dynamic-vlan(2),
|
|
port-base-vlan(3),
|
|
protocolvlan(4),
|
|
double-vlan(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the VLAN to be displayed."
|
|
::= { swL2VlanEntry 3 }
|
|
|
|
swL2VlanMemberPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A range of member ports to the VLAN."
|
|
::= { swL2VlanEntry 4 }
|
|
|
|
swL2VlanStaticPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A range of static ports to the VLAN."
|
|
::= { swL2VlanEntry 5 }
|
|
|
|
swL2VlanStaticTaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the additional ports as tagged."
|
|
::= { swL2VlanEntry 6 }
|
|
|
|
swL2VlanStaticUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the additional ports as untagged."
|
|
::= { swL2VlanEntry 7 }
|
|
|
|
swL2VlanForbiddenPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which are prohibited by management
|
|
from being included in the egress list for this VLAN.
|
|
Changes to this object that cause a port to be included
|
|
or excluded affect the per-port per-VLAN Registrar
|
|
control for Registration Forbidden for the relevant GVRP
|
|
state machine on each port. A port may not be added in
|
|
this set if it is already a member of the set of ports
|
|
in dot1qVlanStaticEgressPorts. The default value of
|
|
this object is a string of zeros of appropriate length,
|
|
excluding all ports from the forbidden set."
|
|
::= { swL2VlanEntry 8 }
|
|
|
|
swL2VlanCurrentTaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which are transmitting traffic for
|
|
this VLAN as tagged frames."
|
|
::= { swL2VlanEntry 9 }
|
|
|
|
swL2VlanCurrentUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports which are transmitting traffic for
|
|
this VLAN as untagged frames."
|
|
::= { swL2VlanEntry 10 }
|
|
|
|
swL2VlanAdvertisementState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the VLAN as able to join GVRP If this parameter
|
|
is not set, the VLAN cannot be configured to have forbidden ports.
|
|
This flag protocol VLAN is fixed to DISABLE."
|
|
::= { swL2VlanEntry 11 }
|
|
|
|
swL2PVIDAutoAssignmentState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the PVID auto assigment state.
|
|
If 'Auto-assign PVID' is disabled, PVID only be changed
|
|
by PVID configuration (user changes explicitly). The VLAN
|
|
configuration will not automatically change PVID.
|
|
|
|
If 'Auto-assign PVID' is enabled, PVID will be possibly
|
|
changed by PVID or VLAN configuration. When user configures
|
|
a port to VLAN X's untagged membership, this port's PVID
|
|
will be updated with VLAN X. In the form of VLAN list command,
|
|
PVID is updated with last item of VLAN list. When user removes
|
|
a port from the untagged membership of the PVID's VLAN, the
|
|
port's PVID will be assigned with 'default VLAN'."
|
|
::= { swL2VlanMgmt 2}
|
|
-- ----------------------------------------------------------------------------
|
|
-- swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 }
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
swL2LoopDetectCtrl OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 1 }
|
|
|
|
swL2LoopDetectAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the loopback detection status for the system."
|
|
::= { swL2LoopDetectCtrl 1 }
|
|
|
|
swL2LoopDetectInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32767)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the interval value, the range is from 1 to 32767 seconds."
|
|
::= { swL2LoopDetectCtrl 2 }
|
|
|
|
swL2LoopDetectRecoverTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the recover time, the range is from 60 to 1000000.
|
|
The value of 0 disables the recover function."
|
|
::= { swL2LoopDetectCtrl 3 }
|
|
|
|
swL2LoopDetectMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vlan-based(1),
|
|
port-based(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the loopback detection mode for the system."
|
|
::= { swL2LoopDetectCtrl 4 }
|
|
|
|
swL2LoopDetectTrapMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
loop_detected(2),
|
|
loop_cleared(3),
|
|
both(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the loopback detection trap mode for the system."
|
|
::= { swL2LoopDetectCtrl 5 }
|
|
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
swL2LoopDetectPortMgmt OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 2 }
|
|
|
|
swL2LoopDetectPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2LoopDetectPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table specifies the loopback detection function specified by port."
|
|
::= { swL2LoopDetectPortMgmt 1 }
|
|
|
|
swL2LoopDetectPortEntry OBJECT-TYPE
|
|
SYNTAX SwL2LoopDetectPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table specifies the loopback detection function specified by port."
|
|
INDEX { swL2LoopDetectPortIndex }
|
|
::= { swL2LoopDetectPortTable 1 }
|
|
|
|
SwL2LoopDetectPortEntry ::=
|
|
SEQUENCE {
|
|
swL2LoopDetectPortIndex
|
|
INTEGER,
|
|
swL2LoopDetectPortState
|
|
INTEGER,
|
|
swL2LoopDetectPortLoopVLAN
|
|
DisplayString,
|
|
swL2LoopDetectPortLoopStatus
|
|
INTEGER
|
|
}
|
|
|
|
swL2LoopDetectPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number. The range is from 1 to
|
|
the maximum port number specified in the module"
|
|
::= { swL2LoopDetectPortEntry 1 }
|
|
|
|
swL2LoopDetectPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the loopback detection function state on the port."
|
|
::= { swL2LoopDetectPortEntry 2 }
|
|
|
|
swL2LoopDetectPortLoopVLAN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the VLAN list that has detected a loopback."
|
|
::= { swL2LoopDetectPortEntry 3 }
|
|
|
|
swL2LoopDetectPortLoopStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
loop(2),
|
|
error(3),
|
|
none(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port status."
|
|
::= { swL2LoopDetectPortEntry 4 }
|
|
-- ******************************************************************************************
|
|
-- Layer 2 Trap
|
|
-- ******************************************************************************************
|
|
|
|
|
|
swL2Notify OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 }
|
|
|
|
|
|
|
|
--swL2NotifyMgmt OBJECT IDENTIFIER ::= { swL2Notify 1 }
|
|
swL2NotifyPrefix OBJECT IDENTIFIER ::= { swL2Notify 2 }
|
|
|
|
|
|
|
|
swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
|
|
|
|
swL2LoopDetectedNotify OBJECT IDENTIFIER ::= { swL2NotifFirmware 0 }
|
|
|
|
|
|
-- ******************************************************************************************
|
|
-- swL2NotifyMgmt
|
|
-- ******************************************************************************************
|
|
|
|
|
|
-- ******************************************************************************************
|
|
|
|
-- swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
|
|
|
|
-- ******************************************************************************************
|
|
-- swL2NotifFirmware
|
|
-- ******************************************************************************************
|
|
|
|
swL2macNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
swL2macNotifyInfo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This trap indicates the mac addresses variation in address table . "
|
|
|
|
::= { swL2NotifFirmware 1 }
|
|
|
|
-- swL2CpuNotification NOTIFICATION-TYPE
|
|
-- OBJECTS {
|
|
-- swL2CpuUtilization
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " This trap indicates the cpu is very busy now. "
|
|
|
|
-- ::= { swL2NotifFirmware 2 }
|
|
|
|
swL2PortLoopOccurred NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
swL2LoopDetectPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trap is sent when Port loop occurred."
|
|
::={swL2LoopDetectedNotify 3}
|
|
|
|
swL2PortLoopRestart NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
swL2LoopDetectPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trap is sent when Port loop restart after interval time."
|
|
::={swL2LoopDetectedNotify 4}
|
|
|
|
swL2VlanLoopOccurred NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
swL2LoopDetectPortIndex,
|
|
swL2VlanLoopDetectVID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trap is sent when Port with VID loop occurred."
|
|
::={swL2LoopDetectedNotify 5}
|
|
|
|
swL2VlanLoopRestart NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
swL2LoopDetectPortIndex,
|
|
swL2VlanLoopDetectVID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trap is sent when Port with VID loop restart after interval time."
|
|
::={swL2LoopDetectedNotify 6}
|
|
-- ******************************************************************************************
|
|
-- agentNotifEquipment
|
|
-- ******************************************************************************************
|
|
|
|
|
|
-- ******************************************************************************************
|
|
-- notificationBidings
|
|
-- ******************************************************************************************
|
|
|
|
swl2NotificationBidings OBJECT IDENTIFIER ::= { swL2NotifyPrefix 1 }
|
|
|
|
swL2macNotifyInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..1024))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the last time reboot information."
|
|
::= { swl2NotificationBidings 1 }
|
|
|
|
-- swL2CpuUtilization OBJECT-TYPE
|
|
-- SYNTAX INTEGER(1..100)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the cpu utilization now."
|
|
-- ::={swl2NotificationBidings 2}
|
|
|
|
swL2VlanLoopDetectVID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the VID that has detected a loopback."
|
|
::= { swl2NotificationBidings 3 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 }
|
|
-- ********************************************************************
|
|
swL2DhcpLocalRelayState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of the DHCP local relay
|
|
function of the switch."
|
|
::= { swL2DhcpLocalRelayMgmt 1 }
|
|
|
|
|
|
swL2DhcpLocalRelayVLANTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2DhcpLocalRelayVLANEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to manage the DHCP local relay status
|
|
for each VLAN."
|
|
::={ swL2DhcpLocalRelayMgmt 2}
|
|
|
|
swL2DhcpLocalRelayVLANEntry OBJECT-TYPE
|
|
SYNTAX SwL2DhcpLocalRelayVLANEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object lists the current VLANs in the switch and their
|
|
corresponding DHCP local relay status."
|
|
INDEX { swL2DhcpLocalRelayVLANID }
|
|
::={ swL2DhcpLocalRelayVLANTable 1 }
|
|
|
|
SwL2DhcpLocalRelayVLANEntry ::=
|
|
SEQUENCE{
|
|
swL2DhcpLocalRelayVLANID
|
|
INTEGER,
|
|
swL2DhcpLocalRelayVLANState
|
|
INTEGER
|
|
}
|
|
|
|
swL2DhcpLocalRelayVLANID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object shows the VIDs of the current VLANS in the switch."
|
|
::= { swL2DhcpLocalRelayVLANEntry 1 }
|
|
|
|
swL2DhcpLocalRelayVLANState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of the DHCP relay function
|
|
of the VLAN."
|
|
::= { swL2DhcpLocalRelayVLANEntry 2 }
|
|
END
|