2105 lines
74 KiB
Plaintext
2105 lines
74 KiB
Plaintext
------------------------------------------------------------------------------
|
|
------------------------------------------------------------------------------
|
|
--
|
|
--
|
|
------------------------------------------------------------------------------
|
|
-- Groups in the company MIB
|
|
--
|
|
-- The following groups are supported for company
|
|
--
|
|
-- Active....
|
|
-- companyCommGroup Permits the user to configure the communities
|
|
-- companyHostGroup Permits the user to configure the hosts
|
|
-- companyMiscGroup Permits the user to configure miscellaneous items
|
|
-- companySpanGroup Permits the user to configure Spanning Tree
|
|
--
|
|
--
|
|
------------------------------------------------------------------------------
|
|
|
|
-- --------------------------- Revision ----------------------------------------
|
|
-- Date Version Author Chanage Description
|
|
-- Old/New
|
|
-- 2008/02/25 2.02/2.03 George Huang Modify OID description dgs-1248tb1 to dgs-1248tbx.
|
|
-- Modify model name DGS-1248T-B1 to DGS-1248T-BX.
|
|
--
|
|
-- 2008/01/07 2.01/2.02 George Huang Correct spelling error:
|
|
-- 'Broadcast Strom Control' to 'Broadcast Storm
|
|
-- Control'.
|
|
-- 2007/12/06 2.00/2.01 George Huang Add objects for QoS, Jumbo Frame, Safeguard,
|
|
-- Broadcast Storm Control, Trusted Host
|
|
-- and Powersaving fuction.
|
|
-- 2007/11/30 1.03/2.00 George Huang +Add objects for Asymmetric VLAN.
|
|
-- +Add F/W upgrade objects.
|
|
-- +Add Management VLAN objects.
|
|
-- 2007/11/27 1.01/1.03 George Huang + Add IGS value.
|
|
-- + Modify the description:64 VLANs to 256 VLANs
|
|
-- (A maximum of 256 VLANs is supported)
|
|
-- 2006/06/23 1.01 Simon Lin + Initial create.
|
|
--
|
|
-- -------------------------- Revision End -------------------------------------
|
|
|
|
------------------------------------------------------------------------------
|
|
DGS-1248T-BX-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE FROM RFC-1212
|
|
enterprises,
|
|
Counter, TimeTicks, IpAddress FROM RFC1155-SMI
|
|
Unsigned32 FROM SNMPv2-SMI
|
|
mib-2,
|
|
DisplayString, PhysAddress FROM RFC1213-MIB;
|
|
|
|
|
|
d-link OBJECT IDENTIFIER ::= { enterprises 171 }
|
|
dlink-products OBJECT IDENTIFIER ::= { d-link 10 }
|
|
dlink-DGS12XXTSeriesProd OBJECT IDENTIFIER ::= { dlink-products 76}
|
|
dgs-1248tbx OBJECT IDENTIFIER ::= { dlink-DGS12XXTSeriesProd 6 }
|
|
|
|
-- textual conventions
|
|
|
|
OwnerString ::= DisplayString
|
|
MacAddress ::= OCTET STRING (SIZE (6))
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
RowStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notInService(2),
|
|
notReady(3),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
|
|
|
|
-- This data type is used to model an administratively
|
|
-- assigned name of the owner of a resource. This
|
|
-- information is taken from the NVT ASCII character set.
|
|
-- It is suggested that this name contain one or more
|
|
-- of the following:
|
|
-- IP address, management station name, network manager's
|
|
-- name, location, or phone number.
|
|
-- In some cases the agent itself will be the owner of
|
|
-- an entry. In these cases, this string shall be set
|
|
-- to a string starting with 'monitor'.
|
|
--
|
|
-- SNMP access control is articulated entirely in terms of
|
|
-- the contents of MIB views; access to a particular SNMP
|
|
-- object instance depends only upon its presence or
|
|
-- absence in a particular MIB view and never upon its
|
|
-- value or the value of related object instances. Thus,
|
|
-- objects of this type afford resolution of resource
|
|
-- contention only among cooperating managers; they
|
|
-- realize no access control function with respect
|
|
-- to uncooperative parties.
|
|
--
|
|
-- By convention, objects with this syntax are declared
|
|
-- as having
|
|
--
|
|
-- SIZE (0..127)
|
|
|
|
|
|
--
|
|
-- company Enterprise MIB Extensions
|
|
--
|
|
companyCommGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 1 }
|
|
companyMiscGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 3 }
|
|
companySpanGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 4 }
|
|
--
|
|
companyConfigGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 11 }
|
|
companyTVlanGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 13 }
|
|
companyPortTrunkGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 14 }
|
|
--
|
|
companyStaticGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 21 }
|
|
companyIgsGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 22 }
|
|
companyDot1xGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 23 }
|
|
--
|
|
companyQoSGroup OBJECT IDENTIFIER ::= { dgs-1248tbx 26 }
|
|
companyTrafficMgmt OBJECT IDENTIFIER ::= { dgs-1248tbx 27 }
|
|
companySecurity OBJECT IDENTIFIER ::= { dgs-1248tbx 28 }
|
|
|
|
--
|
|
-- company Extension MIB, Set Community Information
|
|
--
|
|
commSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CommSetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Set Community Entries."
|
|
::= { companyCommGroup 1 }
|
|
|
|
commSetEntry OBJECT-TYPE
|
|
SYNTAX CommSetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Set Community properties."
|
|
INDEX { commSetIndex }
|
|
::= { commSetTable 1 }
|
|
|
|
CommSetEntry ::= SEQUENCE {
|
|
commSetIndex INTEGER,
|
|
commSetName DisplayString,
|
|
commSetStatus RowStatus
|
|
}
|
|
|
|
commSetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
Community Table. Eight entries are currently supported."
|
|
::= { commSetEntry 1 }
|
|
|
|
commSetName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of this SNMP Set Community Entry."
|
|
::= { commSetEntry 2 }
|
|
|
|
commSetStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RowStatus for the Set Community entry."
|
|
::= { commSetEntry 3 }
|
|
|
|
--
|
|
-- company Extension MIB, Get Community Information
|
|
--
|
|
commGetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CommGetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Get Community Entries."
|
|
::= { companyCommGroup 2 }
|
|
|
|
commGetEntry OBJECT-TYPE
|
|
SYNTAX CommGetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Get Community properties."
|
|
INDEX { commGetIndex }
|
|
::= { commGetTable 1 }
|
|
|
|
CommGetEntry ::= SEQUENCE {
|
|
commGetIndex INTEGER,
|
|
commGetName DisplayString,
|
|
commGetStatus RowStatus
|
|
}
|
|
|
|
commGetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
Community Table. Eight entries are currently supported."
|
|
::= { commGetEntry 1 }
|
|
|
|
commGetName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of this SNMP Get Community Entry."
|
|
::= { commGetEntry 2 }
|
|
|
|
commGetStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RowStatus for the Get Community entry."
|
|
::= { commGetEntry 3 }
|
|
|
|
--
|
|
-- company Extension MIB, Trap Community Information
|
|
--
|
|
commTrapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CommTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Trap Community Entries."
|
|
::= { companyCommGroup 3 }
|
|
|
|
commTrapEntry OBJECT-TYPE
|
|
SYNTAX CommTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Trap Community properties."
|
|
INDEX { commTrapIndex }
|
|
::= { commTrapTable 1 }
|
|
|
|
CommTrapEntry ::= SEQUENCE {
|
|
commTrapIndex INTEGER,
|
|
commTrapName DisplayString,
|
|
commTrapIpAddress IpAddress,
|
|
-- commTrapVlanId INTEGER,
|
|
commTrapSNMPBootup INTEGER,
|
|
commTrapSNMPTPLinkUpDown INTEGER,
|
|
commTrapSNMPFiberLinkUpDown INTEGER,
|
|
commTrapTrapAbnormalTPRXError INTEGER,
|
|
commTrapTrapAbnormalTPTXError INTEGER,
|
|
commTrapTrapAbnormalFiberRXError INTEGER,
|
|
commTrapTrapAbnormalFiberTXError INTEGER,
|
|
commTrapStatus RowStatus
|
|
}
|
|
|
|
commTrapIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
Community Table. Eight entries are currently supported."
|
|
::= { commTrapEntry 1 }
|
|
|
|
commTrapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of this SNMP Trap Community Entry."
|
|
::= { commTrapEntry 2 }
|
|
|
|
commTrapIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP Address of this SNMP Trap Community Entry."
|
|
::= { commTrapEntry 3 }
|
|
|
|
-- commTrapVlanId OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "The Trap VLAN identifier of this SNMP Trap Community Entry.
|
|
-- The value must be from 1 to 4094."
|
|
-- ::= { commTrapEntry 4 }
|
|
|
|
commTrapSNMPBootup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bootup trap"
|
|
::= { commTrapEntry 5 }
|
|
|
|
commTrapSNMPTPLinkUpDown OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Twisted Pair link up / link down trap."
|
|
::= { commTrapEntry 6 }
|
|
|
|
commTrapSNMPFiberLinkUpDown OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fiber link up / link down trap."
|
|
::= { commTrapEntry 7 }
|
|
|
|
commTrapTrapAbnormalTPRXError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Twisted Pair abnormal receive error trap."
|
|
::= { commTrapEntry 9 }
|
|
|
|
commTrapTrapAbnormalTPTXError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Twisted Pair abnormal transmit error trap."
|
|
::= { commTrapEntry 10 }
|
|
|
|
commTrapTrapAbnormalFiberRXError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fiber abnormal receive error trap."
|
|
::= { commTrapEntry 11 }
|
|
|
|
commTrapTrapAbnormalFiberTXError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fiber abnormal transmit error trap."
|
|
::= { commTrapEntry 12 }
|
|
|
|
commTrapStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RowStatus for the Trap Community entry."
|
|
::= { commTrapEntry 13 }
|
|
|
|
--
|
|
-- company Extension MIB, Miscellaneous Information
|
|
--
|
|
|
|
miscReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
noop(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Physically resets the unit - use with care. A (1) resets
|
|
the unit, a (2) does nothing."
|
|
::= { companyMiscGroup 2 }
|
|
|
|
miscStatisticsReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
noop(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the units statistics. A (1) resets
|
|
the unit, a (2) does nothing."
|
|
::= { companyMiscGroup 3 }
|
|
|
|
--
|
|
-- company Extension MIB, Spanning Tree Configuration
|
|
--
|
|
spanOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable Spanning Tree. A (1) enables, a (2) disables."
|
|
::= { companySpanGroup 1 }
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- Products Extension
|
|
-- ---------------------------------------------------------------------
|
|
configVerSwPrimary OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The software image version string."
|
|
::= { companyConfigGroup 1 }
|
|
|
|
configVerHwChipSet OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The hardware chipset version string."
|
|
::= { companyConfigGroup 2 }
|
|
|
|
configBootTftpOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
download(1),
|
|
upload(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The tftp operation to perform downloading the boot image
|
|
to the unit. This object is used in conjunction with
|
|
configBootTftpServerIp and configBootImageFileName."
|
|
::= { companyConfigGroup 3 }
|
|
|
|
configBootTftpServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The TFTP server's IP address used for downloading the
|
|
boot image."
|
|
::= { companyConfigGroup 4 }
|
|
|
|
configBootImageFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The filename of the boot image to download."
|
|
::= { companyConfigGroup 5 }
|
|
|
|
configPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of interface entries used for enterprise specific
|
|
configuration. The number of entries is given by the value
|
|
of ifNumber. All interface entries are assumed to be
|
|
Ethernet interafaces."
|
|
::= { companyConfigGroup 6 }
|
|
|
|
configPortEntry OBJECT-TYPE
|
|
SYNTAX ConfigPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An enterprise specific interface entry."
|
|
INDEX { configPort }
|
|
::= { configPortTable 1 }
|
|
|
|
ConfigPortEntry ::= SEQUENCE {
|
|
configPort INTEGER,
|
|
configPortSpeed INTEGER,
|
|
configPortOperStatus INTEGER,
|
|
configPortFlowControl INTEGER,
|
|
configPortFlowControlOper INTEGER
|
|
}
|
|
|
|
configPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each interface that correlates to ifIndex.
|
|
Its value ranges between 1 and the value of ifNumber."
|
|
::= { configPortEntry 1 }
|
|
|
|
configPortSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
auto(2),
|
|
rate10M-Half(3),
|
|
rate10M-Full(4),
|
|
rate100M-Half(5),
|
|
rate100M-Full(6),
|
|
rate1000M-Full(7)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port's speed desired state."
|
|
::= { configPortEntry 2 }
|
|
|
|
configPortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
rate10M-Half(2),
|
|
rate10M-Full(3),
|
|
rate100M-Half(4),
|
|
rate100M-Full(5),
|
|
rate1000M-Full(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port's operating speed state."
|
|
::= { configPortEntry 3 }
|
|
|
|
configPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port will avoid transmitting a new packet
|
|
for the period of time specified in a received
|
|
PAUSE packet when enabled."
|
|
::= { configPortEntry 4 }
|
|
|
|
configPortFlowControlOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port's operating flow control state."
|
|
::= { configPortEntry 5 }
|
|
|
|
|
|
--
|
|
-- VLAN Mode
|
|
--
|
|
configVLANMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
modeTagBased(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines the VLAN mode."
|
|
::= { companyConfigGroup 7 }
|
|
|
|
--
|
|
-- Additional Configuration objects
|
|
--
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- Mirror
|
|
-- ---------------------------------------------------------------------
|
|
configMirrorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigMirrorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of the Mirror"
|
|
::= { companyConfigGroup 8 }
|
|
|
|
configMirrorEntry OBJECT-TYPE
|
|
SYNTAX ConfigMirrorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Mirror entry containing the Mirror id and mode."
|
|
INDEX { configMirrorId }
|
|
::= { configMirrorTable 1 }
|
|
|
|
ConfigMirrorEntry ::= SEQUENCE {
|
|
configMirrorId INTEGER,
|
|
configMirrorMon INTEGER,
|
|
configMirrorTXSrc PortList,
|
|
configMirrorRXSrc PortList,
|
|
configMirrorStatus RowStatus
|
|
}
|
|
|
|
configMirrorId OBJECT-TYPE
|
|
SYNTAX INTEGER (1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
Mirror Table. One entries are currently supported."
|
|
::= { configMirrorEntry 1 }
|
|
|
|
configMirrorMon OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When mirroring is enabled (configMirroringMode =
|
|
ingress, egress, both), this identifies the mirroring monitoring
|
|
port. This value has a valid range of 1 to ifNumber when
|
|
enabled."
|
|
::= { configMirrorEntry 2 }
|
|
|
|
configMirrorTXSrc OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When mirroring is enabled , this identifies the TX mirroring
|
|
source port.This value has a valid range of 1 to ifNumber
|
|
when enbaled.Each octet within this value specifies a set
|
|
of eight ports, with the first octet specifying ports 1
|
|
through 8, the second octet specifying ports 9 through 16,
|
|
etc.Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
::= { configMirrorEntry 3 }
|
|
|
|
configMirrorRXSrc OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When mirroring is enabled , this identifies the RX mirroring
|
|
source port.This value has a valid range of 1 to ifNumber
|
|
when enbaled.Each octet within this value specifies a set
|
|
of eight ports, with the first octet specifying ports 1
|
|
through 8, the second octet specifying ports 9 through 16,
|
|
etc.Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
::= { configMirrorEntry 4 }
|
|
|
|
configMirrorStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RowStatus for the Mirror entry."
|
|
::= { configMirrorEntry 5 }
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- SNMP Function
|
|
-- ---------------------------------------------------------------------
|
|
configSNMPEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable SNMP function. A (1) enables, a (2) disables."
|
|
::= { companyConfigGroup 9 }
|
|
|
|
-- ---------------------------------------------------------------------
|
|
--
|
|
-- ---------------------------------------------------------------------
|
|
configIpAssignmentMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual(1),
|
|
dhcp(2),
|
|
other(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the device address is assigned by
|
|
the user (manual), or DHCP, or Others(BootP)."
|
|
::= { companyConfigGroup 12 }
|
|
|
|
configPhysAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface's address at the protocol layer
|
|
immediately 'below' the network layer in the
|
|
protocol stack. This is the physical address
|
|
for the end-station."
|
|
::= { companyConfigGroup 13 }
|
|
|
|
configPasswordAdmin OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The adminstrator password"
|
|
::= { companyConfigGroup 15 }
|
|
|
|
configIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP Address for the RDU box."
|
|
::= { companyConfigGroup 16 }
|
|
|
|
configNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The network mask for the RDU box."
|
|
::= { companyConfigGroup 17 }
|
|
|
|
configGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Gatway Address for the unit."
|
|
::= { companyConfigGroup 18 }
|
|
|
|
configSave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
save(1),
|
|
noop(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Physically saves the current configuration to nvram.
|
|
- use with care.
|
|
(1) saves the configuration
|
|
(2) does nothing."
|
|
::= { companyConfigGroup 19 }
|
|
|
|
configRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
restore(1),
|
|
noop(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Restores the configuration of the unit to the
|
|
original settings."
|
|
::= { companyConfigGroup 22 }
|
|
|
|
configTftpServerIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The TFTP server's IP address used to upload or
|
|
download configuration file."
|
|
::= { companyConfigGroup 32 }
|
|
|
|
configTftpServerFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The filename used to store or retrieve the configuration
|
|
file from the tftp server."
|
|
::= { companyConfigGroup 33 }
|
|
|
|
configTftpOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
download(1),
|
|
upload(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The tftp operation to perform either downloading the
|
|
configuration file to the unit or uploading the current
|
|
configuration file to the tftp server. This object is
|
|
used in conjunction with configTftpServerIpAddress
|
|
and configTftpServerFileName."
|
|
::= { companyConfigGroup 34 }
|
|
|
|
-- configSysTFTPServer OBJECT-TYPE
|
|
-- SYNTAX INTEGER { disable (0), enable(1)}
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- " TFTP Server is ON or OFF
|
|
-- ON = 1
|
|
-- OFF = 0"
|
|
-- ::= { companyConfigGroup 42 }
|
|
|
|
configJumboEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable Jumbo Frame function.
|
|
Maximum Length of jumbo frame is 9220 bytes."
|
|
::= { companyConfigGroup 43 }
|
|
|
|
configSafeguardEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable Safeguard Engine.
|
|
D-Link Safeguard Engine is a robust and innovative technology developed by D-Link,
|
|
which will automatically throttle the impact of packet flooding into the switch's CPU.
|
|
It will keep D-Link Switches better protected from being too frequently interrupted by
|
|
malicious viruses or worm attacks."
|
|
::= { companyConfigGroup 44 }
|
|
|
|
configPowerSavingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable Power Saving function.
|
|
The Power Saving mode is capable of reducing power consumption automatically when
|
|
connected devices are switched off. By reducing power consumption, less heat is produced,
|
|
resulting in extended product life and lower operating costs. By default, the Power
|
|
Saving mode is enabled. "
|
|
::= { companyConfigGroup 45 }
|
|
|
|
--
|
|
-- The TVLAN group
|
|
--
|
|
|
|
tvlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TvlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of the VLANs"
|
|
::= { companyTVlanGroup 1 }
|
|
|
|
tvlanEntry OBJECT-TYPE
|
|
SYNTAX TvlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A VLAN entry containing the VLAN id and name."
|
|
INDEX { tvlanId }
|
|
::= { tvlanTable 1 }
|
|
|
|
TvlanEntry ::= SEQUENCE {
|
|
tvlanId INTEGER,
|
|
tvlanName DisplayString,
|
|
tvlanMember PortList,
|
|
tvlanUntaggedPorts PortList,
|
|
tvlanStatus INTEGER
|
|
}
|
|
|
|
tvlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VLAN identifier. A maximum of 256 VLANs is supported.
|
|
The value must be from 1 to 4094."
|
|
::= { tvlanEntry 1 }
|
|
|
|
tvlanName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VLAN name.Length must between 1 and 20."
|
|
::= { tvlanEntry 2 }
|
|
|
|
tvlanMember OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The set of the device's member ports that belong
|
|
to the VLAN.
|
|
|
|
Each octet within the value of this object specifies a
|
|
set of eight ports, with the first octet specifying ports
|
|
1 through 8, the second octet specifying ports 9
|
|
through 16, etc. Within each octet, the most
|
|
significant bit represents the lowest numbered
|
|
port, and the least significant bit represents the
|
|
highest numbered port. Thus, each port of the
|
|
VLAN is represented by a single bit within the
|
|
value of this object. If that bit has a value of
|
|
'1' then that port is included in the set of
|
|
ports; the port is not included if its bit has a
|
|
value of '0'."
|
|
|
|
::= { tvlanEntry 3 }
|
|
|
|
tvlanUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If that bit has a value of '1' the outgoing frame on the egress
|
|
port is untagged. If that bit has a value of '0' the outgoing
|
|
frame on the egress port is tagged."
|
|
::= { tvlanEntry 4 }
|
|
|
|
tvlanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
notready (3),
|
|
createAndwait (5),
|
|
destroy (6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of an entry in the VLAN Table. Only a subset
|
|
of the rowstatus variables (active, createAndGo, destroy)
|
|
are available."
|
|
::= { tvlanEntry 5 }
|
|
|
|
tvlanManagementOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable management VLAN mechanism."
|
|
::= { companyTVlanGroup 2 }
|
|
|
|
tvlanManagementid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The management VLAN ID which allow to forward to CPU."
|
|
::= { companyTVlanGroup 3 }
|
|
|
|
tvlanPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TvlanPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of ports and their associated VLAN."
|
|
::= { companyTVlanGroup 4 }
|
|
|
|
tvlanPortEntry OBJECT-TYPE
|
|
SYNTAX TvlanPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Information pertaining to an individual port regarding
|
|
to which VLAN it belongs."
|
|
INDEX { tvlanPortPortId }
|
|
::= { tvlanPortTable 1 }
|
|
|
|
TvlanPortEntry ::= SEQUENCE {
|
|
tvlanPortPortId INTEGER,
|
|
tvlanPortVlanId INTEGER
|
|
}
|
|
|
|
tvlanPortPortId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A port identifier that is in the range of 1 to ifNumber."
|
|
::= { tvlanPortEntry 1 }
|
|
|
|
tvlanPortVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The default VLAN identifier, PVID. The value must be from 1 to 4094."
|
|
::= { tvlanPortEntry 2 }
|
|
|
|
tvlanAsyOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable IEEE 802.1Q Asymmetric VLAN"
|
|
::= { companyTVlanGroup 5 }
|
|
|
|
--
|
|
-- The Port Trunking Group
|
|
--
|
|
portTrunkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortTrunkEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of port trunks and their associated members."
|
|
::= { companyPortTrunkGroup 1 }
|
|
|
|
portTrunkEntry OBJECT-TYPE
|
|
SYNTAX PortTrunkEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A port trunk entry containing the trunk id and trunk members."
|
|
INDEX { portTrunkId, portTrunkMember }
|
|
::= { portTrunkTable 1 }
|
|
|
|
PortTrunkEntry ::= SEQUENCE {
|
|
portTrunkId INTEGER,
|
|
portTrunkName DisplayString,
|
|
portTrunkMember PortList
|
|
}
|
|
|
|
portTrunkId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port trunk identifier. The current range is from 1 to 6."
|
|
::= { portTrunkEntry 1 }
|
|
|
|
portTrunkName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Trunk name.Length must between 1 and 20."
|
|
::= { portTrunkEntry 2 }
|
|
|
|
portTrunkMember OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A port trunk member value indicates which port is a
|
|
member of the specified trunk. Valid values are in the
|
|
range from 0 to ifNumber. A zero indicates that no port
|
|
is contained in the specifed member.
|
|
Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
::= { portTrunkEntry 3 }
|
|
|
|
--
|
|
-- The STATIC MAC group
|
|
--
|
|
|
|
staticOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable Static MAC. Currently it doesn't support
|
|
'disabled' function."
|
|
::= { companyStaticGroup 1 }
|
|
|
|
staticAutoLearning OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The set of the device's member ports that belong
|
|
to the Static MAC auto learning enable/disable.
|
|
Each octet within the value of this object specifies a
|
|
set of eight ports, with the first octet specifying ports
|
|
1 through 8, the second octet specifying ports 9
|
|
through 16, etc. Within each octet, the most
|
|
significant bit represents the lowest numbered
|
|
port, and the least significant bit represents the
|
|
highest numbered port. Thus, each port is represented
|
|
by a single bit within the value of this object.
|
|
If that bit has a value of '1' then that port is in auto
|
|
learning enable state; the port is not in auto learning
|
|
state if its bit has a value of '0'."
|
|
::= { companyStaticGroup 2 }
|
|
|
|
staticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StaticEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of the Static MACs"
|
|
::= { companyStaticGroup 3 }
|
|
|
|
staticEntry OBJECT-TYPE
|
|
SYNTAX StaticEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Static MAC entry containing the mac and forwarding port."
|
|
INDEX { staticId }
|
|
::= { staticTable 1 }
|
|
|
|
StaticEntry ::= SEQUENCE {
|
|
staticId INTEGER,
|
|
staticMac MacAddress,
|
|
staticPort INTEGER,
|
|
staticVlanID INTEGER,
|
|
staticStatus INTEGER
|
|
}
|
|
|
|
staticId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Static MAC identifier. A maximum of 60 Static MACs is supported.
|
|
The value must be from 1 to 60"
|
|
::= { staticEntry 1 }
|
|
|
|
staticMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Static MAC associated with the Id."
|
|
::= { staticEntry 2 }
|
|
|
|
staticPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Static MAC forwarding port with the ID."
|
|
::= { staticEntry 3 }
|
|
|
|
staticVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Static MAC VLAN ID with the ID."
|
|
::= { staticEntry 4 }
|
|
|
|
staticStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
notready (3),
|
|
--createAndGo (4),
|
|
createAndwait (5),
|
|
destroy (6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of an entry in the Static MAC Table. Only a subset
|
|
of the rowstatus variables (active, createAndGo, destroy)
|
|
are available."
|
|
::= { staticEntry 5 }
|
|
|
|
--
|
|
-- The IGS Groups
|
|
--
|
|
|
|
igsSystem OBJECT IDENTIFIER ::= { companyIgsGroup 1 }
|
|
igsVlan OBJECT IDENTIFIER ::= { companyIgsGroup 3 }
|
|
|
|
--
|
|
-- The IGS System Group
|
|
--
|
|
|
|
igsStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enables or disables IGMP snooping in the system."
|
|
DEFVAL { 2 }
|
|
::= { igsSystem 2 }
|
|
|
|
igsv3Processing OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"To enable processing of IGMPv3 messages and to
|
|
operate in IGMPv3 mode, this object must be set to
|
|
enabled, when set as disabled the operation will be
|
|
in IGMPv2 mode."
|
|
DEFVAL { 1 }
|
|
::= { igsSystem 3 }
|
|
|
|
igsRouterPortPurgeInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (60..600)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the interval (in seconds) after which a learnt
|
|
router port entry will be purged.
|
|
|
|
For each router port learnt, a 'RouterPortPurgeTimer' runs for
|
|
'RouterPortPurgeInterval'.
|
|
|
|
This timer will be restarted whenever a router control message is
|
|
received over that port. If no router control mssages are received
|
|
for 'RouterPortPurgeInterval' time, the learnt router port entry
|
|
will be purged."
|
|
DEFVAL { 260 }
|
|
::= { igsSystem 4 }
|
|
|
|
igsHostPortPurgeInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (130..153025)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the interval (in seconds) after which a learnt
|
|
host port entry will be purged.
|
|
|
|
For each host port learnt, a 'PortPurgeTimer' runs for
|
|
'HostPortPurgeInterval'.
|
|
|
|
This timer will be restarted whenever a report message from host is
|
|
received over that port. If no report mssages are received
|
|
for 'HostPortPurgeInterval' time, the learnt host entry
|
|
will be purged from the multicast group."
|
|
DEFVAL {260}
|
|
::= { igsSystem 5 }
|
|
|
|
igsReportForwardInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..25)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the interval (in seconds) within which the next report
|
|
messages for the same multicast group will not be forwarded out.
|
|
|
|
The purpose of this timer is to avoid multiple report messages
|
|
for the same group being forwarded out. So that
|
|
unnecessary multicast packets in the network can be avoided.
|
|
|
|
The 'ReportForwardTimer' is per multicast group.
|
|
|
|
This timer is started as soon as a report message for that group is
|
|
forwarded out. Within this 'ReportForwardInterval' if
|
|
another report for the same group arrives, that report will not be
|
|
forwarded. The first report message which is received
|
|
for this group after the 'ReportForwardInterval' only will be
|
|
forwarded out.
|
|
|
|
When set as '0' , this timer will not be started and all the
|
|
report messages will be forwarded as and when they are received."
|
|
DEFVAL { 5 }
|
|
::= { igsSystem 6 }
|
|
|
|
igsLeaveProcessInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..25)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the interval (in seconds) after which a Leave
|
|
message is forwarded on either router port(if present)
|
|
or on all ports of a bridge (if no router port present).
|
|
|
|
when a leave message from a host for a group is received
|
|
by the bridge, The bridge will form a group-specific query
|
|
and sends it on the port on which the leave message is
|
|
received. A timer is started by a bridge with a time interval
|
|
equal to IgsLeaveProcessInterval.
|
|
|
|
If a report message is received before above timer expires,
|
|
Leave message is dropped.Otherwise Leave message is either
|
|
forwarded on all ports of the bridge or only on router port
|
|
depending upon the case."
|
|
|
|
DEFVAL { 1 }
|
|
::= { igsSystem 7 }
|
|
|
|
igsMcastEntryAgeingInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (60..600)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the interval (in seconds) after which the target
|
|
will be checked for Multicast data hit for the entry
|
|
|
|
This timer will be started for every (S, G) in the
|
|
control plane."
|
|
DEFVAL { 600 }
|
|
::= { igsSystem 8 }
|
|
|
|
igsSharedSegmentAggregationInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..60)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the interval (in seconds) for which reports of
|
|
IGMPv3 messages on a shared segment will be aggregated
|
|
for a group.
|
|
This timer will be started only when multiple hosts are
|
|
identified on a port for the Multicast group. The timer
|
|
will be stopped when all but one host is left on the
|
|
port for the Multicast group.
|
|
This timer will be re-started on its expiry and Multicast
|
|
forwarding table will be updated."
|
|
DEFVAL { 30 }
|
|
::= { igsSystem 9 }
|
|
|
|
igsGblReportFwdOnAllPorts OBJECT-TYPE
|
|
SYNTAX INTEGER { allports(1), rtrports(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IGMP snooping module will forward reports only on router
|
|
ports by default, to enable forwarding on all other ports
|
|
the object must be set to allports."
|
|
DEFVAL { 2 }
|
|
::= { igsSystem 10 }
|
|
|
|
igsNextMcastFwdMode OBJECT-TYPE
|
|
SYNTAX INTEGER { ipbased(1), macbased(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field describes the multicast forwarding mode that
|
|
will be used upon restart of the ISS Switch."
|
|
DEFVAL { 1 }
|
|
::= { igsSystem 13 }
|
|
|
|
igsQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (60..600)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The frequency at which IGMP Host-Query packets are
|
|
transmitted on this interface."
|
|
DEFVAL { 125 }
|
|
::= { igsSystem 14 }
|
|
|
|
igsQueryMaxResponseTime OBJECT-TYPE
|
|
SYNTAX INTEGER (10..25)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum query response time advertised in IGMPv2
|
|
queries on this interface."
|
|
DEFVAL { 10 }
|
|
::= { igsSystem 15 }
|
|
|
|
igsRobustnessValue OBJECT-TYPE
|
|
SYNTAX INTEGER (2..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Robustness Variable allows tuning for the expected
|
|
packet loss on a subnet. If a subnet is expected to be
|
|
lossy, the Robustness Variable may be increased. IGMP is
|
|
robust to (Robustness Variable-1) packet losses."
|
|
DEFVAL { 2 }
|
|
::= { igsSystem 16 }
|
|
|
|
igsLastMembQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..25)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Last Member Query Interval is the Max Response Time
|
|
inserted into Group-Specific Queries sent in response to
|
|
Leave Group messages, and is also the amount of time between
|
|
Group-Specific Query messages. This value may be tuned to
|
|
modify the leave latency of the network. A reduced value
|
|
results in reduced time to detect the loss of the last
|
|
member of a group. The value of this object is irrelevant
|
|
if igmpInterfaceVersion is 1."
|
|
DEFVAL { 1 }
|
|
::= { igsSystem 17 }
|
|
|
|
igsQuerierStateOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"To enable transmitting IGMP Query packets or to disable."
|
|
::= { igsSystem 18 }
|
|
--
|
|
-- The IGS Vlan Group
|
|
--
|
|
|
|
-- Vlan Based Multicast Forwarding Table
|
|
|
|
igsVlanMcastFwdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgsVlanMcastFwdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains VLAN based multicast forwarding
|
|
information learnt when VLAN is ENABLED in the system."
|
|
::= { igsVlan 1 }
|
|
|
|
igsVlanMcastFwdEntry OBJECT-TYPE
|
|
SYNTAX IgsVlanMcastFwdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains VlanId, multicast group address and the
|
|
list of ports who have members for the multicast group."
|
|
INDEX { igsVlanMcastFwdVlanIdMac,
|
|
igsVlanMcastFwdGroupAddress }
|
|
::= { igsVlanMcastFwdTable 1 }
|
|
|
|
IgsVlanMcastFwdEntry ::=
|
|
SEQUENCE {
|
|
igsVlanMcastFwdVlanIdMac
|
|
INTEGER,
|
|
igsVlanMcastFwdGroupAddress
|
|
MacAddress,
|
|
igsVlanMcastFwdPortListMac
|
|
PortList
|
|
}
|
|
|
|
igsVlanMcastFwdVlanIdMac OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Vlan Id pertaining to the Multicast forwarding entry."
|
|
::= { igsVlanMcastFwdEntry 1 }
|
|
|
|
igsVlanMcastFwdGroupAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC multicast group address."
|
|
::= { igsVlanMcastFwdEntry 2 }
|
|
|
|
igsVlanMcastFwdPortListMac OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of ports who have members for the MAC multicast
|
|
group and the Vlan Id."
|
|
::= { igsVlanMcastFwdEntry 3 }
|
|
|
|
-- Vlan Based Router Port List
|
|
|
|
igsVlanRouterPortListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgsVlanRouterPortListEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains list of bridge ports through which
|
|
a router, in a particular VLAN, is reachable."
|
|
::= { igsVlan 3 }
|
|
|
|
igsVlanRouterPortListEntry OBJECT-TYPE
|
|
SYNTAX IgsVlanRouterPortListEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains VlanId of router , list of reachable
|
|
router ports."
|
|
INDEX { igsVlanRouterPortListVlanId }
|
|
::= { igsVlanRouterPortListTable 1 }
|
|
|
|
IgsVlanRouterPortListEntry ::=
|
|
SEQUENCE {
|
|
igsVlanRouterPortListVlanId
|
|
INTEGER,
|
|
igsVlanRouterPortList
|
|
PortList
|
|
}
|
|
|
|
igsVlanRouterPortListVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Vlan Id of the ports through which router is reachable."
|
|
::= { igsVlanRouterPortListEntry 1 }
|
|
|
|
igsVlanRouterPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains list of bridge ports through which a router,
|
|
in a particular VLAN, is reachable. These router ports
|
|
are learnt through control messages received from routers,
|
|
and can also be configured statically."
|
|
::= { igsVlanRouterPortListEntry 2 }
|
|
|
|
-- Vlan Based Filter Table
|
|
|
|
igsVlanFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgsVlanFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains configuration to disable IGMP snooping
|
|
on specific Vlans. This Table is valid only when VLAN is
|
|
enabled in the system."
|
|
::= { igsVlan 4 }
|
|
|
|
igsVlanFilterEntry OBJECT-TYPE
|
|
SYNTAX IgsVlanFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains Vlan Id , Vlan Filter Status."
|
|
INDEX { igsVlanId }
|
|
::= { igsVlanFilterTable 1 }
|
|
|
|
IgsVlanFilterEntry ::=
|
|
SEQUENCE {
|
|
igsVlanId
|
|
INTEGER,
|
|
igsVlanFilterStatus
|
|
INTEGER
|
|
}
|
|
|
|
igsVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Vlan Id for which IGMP snooping feature is to be disabled."
|
|
::= { igsVlanFilterEntry 1 }
|
|
|
|
igsVlanFilterStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When status is set as enabled, IGMP snooping feature
|
|
is disabled for that Vlan Id.
|
|
|
|
When status is set as disabled, the entry stands invalid.
|
|
In that case IGMP snooping feature remains enabled for
|
|
that Vlan."
|
|
::= { igsVlanFilterEntry 2 }
|
|
|
|
--
|
|
-- The Dot1x Groups
|
|
--
|
|
|
|
radius OBJECT IDENTIFIER ::= { companyDot1xGroup 1 }
|
|
dot1xAuth OBJECT IDENTIFIER ::= { companyDot1xGroup 2 }
|
|
|
|
radiusServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address of the RADIUS server."
|
|
::= { radius 1 }
|
|
|
|
radiusServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Port of the RADIUS server."
|
|
::= { radius 2 }
|
|
|
|
radiusServerSharedSecret OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The secret string which is shared between Server and Client."
|
|
::= { radius 3 }
|
|
|
|
dot1xAuthSystemControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable Static 802.1x. A (1) enables, a (2) disables."
|
|
::= { dot1xAuth 1 }
|
|
|
|
dot1xAuthQuietPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value, in seconds, of the quietPeriod constant
|
|
currently in use by the Authenticator PAE state
|
|
machine."
|
|
REFERENCE
|
|
"9.4.1, quietPeriod."
|
|
DEFVAL { 60 }
|
|
::= { dot1xAuth 2 }
|
|
|
|
dot1xAuthTxPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value, in seconds, of the txPeriod constant
|
|
currently in use by the Authenticator PAE state
|
|
machine."
|
|
REFERENCE
|
|
"9.4.1, txPeriod."
|
|
DEFVAL { 30 }
|
|
::= { dot1xAuth 3 }
|
|
|
|
dot1xAuthSuppTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value, in seconds, of the suppTimeout constant
|
|
currently in use by the Backend Authentication state
|
|
machine."
|
|
REFERENCE
|
|
"9.4.1, suppTimeout."
|
|
DEFVAL { 30 }
|
|
::= { dot1xAuth 4 }
|
|
|
|
dot1xAuthServerTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value, in seconds, of the serverTimeout constant
|
|
currently in use by the Backend Authentication state
|
|
machine."
|
|
REFERENCE
|
|
"9.4.1, serverTimeout."
|
|
DEFVAL { 30 }
|
|
::= { dot1xAuth 5 }
|
|
|
|
dot1xAuthMaxReq OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the maxReq constant currently in use by
|
|
the Backend Authentication state machine."
|
|
REFERENCE
|
|
"9.4.1, maxReq."
|
|
DEFVAL { 2 }
|
|
::= { dot1xAuth 6 }
|
|
|
|
dot1xAuthReAuthPeriod OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value, in seconds, of the reAuthPeriod constant
|
|
currently in use by the Reauthentication Timer state
|
|
machine."
|
|
REFERENCE
|
|
"9.4.1, reAuthPerio."
|
|
DEFVAL { 3600 }
|
|
::= { dot1xAuth 7 }
|
|
|
|
dot1xAuthReAuthEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The enable/disable control used by the Reauthentication
|
|
Timer state machine (8.5.5.1)."
|
|
REFERENCE
|
|
"9.4.1, reAuthEnable."
|
|
::= { dot1xAuth 8 }
|
|
|
|
dot1xAuthConfigPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1xAuthConfigPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that contains the configuration objects for the
|
|
Authenticator PAE associated with each port.
|
|
An entry appears in this table for each port that may
|
|
authenticate access to itself."
|
|
::= { dot1xAuth 9 }
|
|
|
|
dot1xAuthConfigPortEntry OBJECT-TYPE
|
|
SYNTAX Dot1xAuthConfigPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The configuration information for an Authenticator Port."
|
|
INDEX { dot1xAuthConfigPortNumber }
|
|
::= { dot1xAuthConfigPortTable 1 }
|
|
|
|
Dot1xAuthConfigPortEntry ::= SEQUENCE {
|
|
dot1xAuthConfigPortNumber INTEGER,
|
|
dot1xAuthConfigPortControl INTEGER,
|
|
dot1xAuthConfigPortStatus INTEGER,
|
|
dot1xAuthConfigPortSessionTime TimeTicks,
|
|
dot1xAuthConfigPortSessionUserName DisplayString
|
|
}
|
|
|
|
dot1xAuthConfigPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each interface that correlates to ifIndex.
|
|
Its value ranges between 1 and the value of ifNumber."
|
|
::= { dot1xAuthConfigPortEntry 1 }
|
|
|
|
dot1xAuthConfigPortControl OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current value of the controlled Port
|
|
control parameter for the Port."
|
|
REFERENCE
|
|
"9.4.1, AuthControlledPortControl."
|
|
::= { dot1xAuthConfigPortEntry 2 }
|
|
|
|
dot1xAuthConfigPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { authnull(0), authorized(1), unauthorized(2)}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current value of the controlled Port
|
|
status parameter for the Port."
|
|
REFERENCE
|
|
"9.4.1, AuthControlledPortStatu."
|
|
::= { dot1xAuthConfigPortEntry 3 }
|
|
|
|
dot1xAuthConfigPortSessionTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The duration of the session in seconds."
|
|
REFERENCE
|
|
"9.4.4, Session Tim."
|
|
::= { dot1xAuthConfigPortEntry 4 }
|
|
|
|
dot1xAuthConfigPortSessionUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The User-Name representing the identity of the
|
|
Supplicant PAE."
|
|
REFERENCE
|
|
"9.4.4, Session User Name."
|
|
::= { dot1xAuthConfigPortEntry 5 }
|
|
|
|
|
|
--
|
|
-- The companyQoSGroup Groups
|
|
--
|
|
qosMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot1p(1),
|
|
dscp(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Settings of Qos mode:
|
|
IEEE 802.1p QoS or DSCP QoS."
|
|
::= { companyQoSGroup 1 }
|
|
|
|
queuingMechanism OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
strictPriority(1),
|
|
wrr(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Queuing mechanism.
|
|
strictPriority(1) : Strict Priority
|
|
wrr(2) : Weighted Round Robin
|
|
"
|
|
::= { companyQoSGroup 2 }
|
|
|
|
dot1pPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1pPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of 802.1p port default priority Entries."
|
|
::= { companyQoSGroup 3 }
|
|
|
|
dot1pPortEntry OBJECT-TYPE
|
|
SYNTAX Dot1pPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of 802.1p port default priority priorities."
|
|
INDEX { dot1pPortIndex }
|
|
::= { dot1pPortTable 1 }
|
|
|
|
Dot1pPortEntry ::= SEQUENCE {
|
|
dot1pPortIndex INTEGER,
|
|
dot1pPortPriority INTEGER
|
|
}
|
|
|
|
dot1pPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A port identifier that is in the range of 1 to ifNumber."
|
|
::= { dot1pPortEntry 1 }
|
|
|
|
dot1pPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
middle(2),
|
|
high(3),
|
|
highest(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For ingress untagged packets, the per port 'Default Priority'
|
|
setting will be applied to packets of each port to provide
|
|
port-based traffic prioritization.
|
|
For ingress tagged packets, D-Link Smart Switches will refer
|
|
to their 802.1p information and prioritize them with 4
|
|
different priority queues. "
|
|
::= { dot1pPortEntry 2 }
|
|
|
|
|
|
dscpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DscpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of DSCP Entries."
|
|
::= { companyQoSGroup 4 }
|
|
|
|
dscpEntry OBJECT-TYPE
|
|
SYNTAX DscpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of DSCP properties."
|
|
INDEX { dscpIndex }
|
|
::= { dscpTable 1 }
|
|
|
|
DscpEntry ::= SEQUENCE {
|
|
dscpIndex INTEGER,
|
|
dscpPriority INTEGER
|
|
}
|
|
|
|
dscpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"DSCP value. For ingress IP packets, the DiffServ field of IP packets
|
|
provide DSCP-based traffic prioritization information to switches.
|
|
D-Link Smart Switches will refer to the value of DiffServ filed
|
|
information and prioritize them with 4 different priority queues."
|
|
::= { dscpEntry 1 }
|
|
|
|
dscpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
middle(2),
|
|
high(3),
|
|
highest(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The queuing priority mapping to DSCP value."
|
|
::= { dscpEntry 2 }
|
|
|
|
|
|
--
|
|
-- The companyTrafficMgmt Groups
|
|
--
|
|
|
|
|
|
-- Broadcast Storm Control
|
|
broadcastStormCtrlSettings OBJECT IDENTIFIER ::= { companyTrafficMgmt 3 }
|
|
|
|
broadcastStormCtrlGlobalOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates storm control function is enabled or disabled
|
|
for device.
|
|
When you enable broadcast storm control function, D-Link Smart
|
|
Switches will allowed you to limit the number of broadcast packets
|
|
per second going through device."
|
|
::= { broadcastStormCtrlSettings 1 }
|
|
|
|
broadcastStormGlobalThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
kBps-8(2),
|
|
kBps-16(3),
|
|
kBps-32(4),
|
|
kBps-64(5),
|
|
kBps-128(6),
|
|
kBps-256(7),
|
|
kBps-512(8),
|
|
kBps-1024(9),
|
|
kBps-2048(10),
|
|
kBps-4096(11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The threshold value in unit of thousand bytes per second for broadcast traffic of the specific port."
|
|
::= { broadcastStormCtrlSettings 2 }
|
|
|
|
--
|
|
-- The companySecurity group
|
|
--
|
|
trustedHostSettings OBJECT IDENTIFIER ::= { companySecurity 1 }
|
|
|
|
trustedHostOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates trusted host function is enabled or disabled.
|
|
When trusted host function is enabled, D-Link Smart Switches will
|
|
only allow hosts which you trust to access and control the switch.
|
|
Your local host IP Addresses must be one of the IP Addresses to
|
|
avoid disconnection."
|
|
::= { trustedHostSettings 1 }
|
|
|
|
|
|
trustedHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TrustedHostEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of Trusted Host Entries."
|
|
::= { trustedHostSettings 2 }
|
|
|
|
|
|
trustedHostEntry OBJECT-TYPE
|
|
SYNTAX TrustedHostEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of Trusted Host properties."
|
|
INDEX { trustedHostID }
|
|
::= { trustedHostTable 1 }
|
|
|
|
|
|
TrustedHostEntry ::= SEQUENCE {
|
|
trustedHostID INTEGER,
|
|
trustedHostIpAddress IpAddress,
|
|
trustedHostIpMask IpAddress,
|
|
trustedHostStatus INTEGER
|
|
}
|
|
|
|
trustedHostID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
Trusted Host Table. Three entries are currently supported."
|
|
::= { trustedHostEntry 1 }
|
|
|
|
trustedHostIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address of host you allow to access to D-Link Smart
|
|
Switch.
|
|
Your local host IP Addresses must be one of the IP Addresses
|
|
to avoid disconnection."
|
|
::= { trustedHostEntry 2 }
|
|
|
|
trustedHostIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to mask with IP address, it allow you set a subnet as a
|
|
trusted host entry."
|
|
::= { trustedHostEntry 3 }
|
|
|
|
trustedHostStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
notready (3),
|
|
createAndwait (5),
|
|
destroy (6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of an entry in the Trusted Host Table. Only a subset
|
|
of the rowstatus variables (active, createAndGo, destroy)
|
|
are available."
|
|
::= { trustedHostEntry 4 }
|
|
|
|
-- *****************************************************************
|
|
--
|
|
-- Enterprise Trap group
|
|
--
|
|
-- *****************************************************************
|
|
|
|
swFiberInsert TRAP-TYPE
|
|
ENTERPRISE dgs-1248tbx
|
|
DESCRIPTION
|
|
"Fiber insert trap."
|
|
::= 1
|
|
|
|
swFiberRemove TRAP-TYPE
|
|
ENTERPRISE dgs-1248tbx
|
|
DESCRIPTION
|
|
"Fiber remove trap."
|
|
::= 2
|
|
|
|
swFiberAbnormalRXError TRAP-TYPE
|
|
ENTERPRISE dgs-1248tbx
|
|
DESCRIPTION
|
|
"Fiber abnormal rx error trap."
|
|
::= 3
|
|
|
|
swFiberAbnormalTXError TRAP-TYPE
|
|
ENTERPRISE dgs-1248tbx
|
|
DESCRIPTION
|
|
"Fiber abnormal tx error trap."
|
|
::= 4
|
|
|
|
swTPAbnormalRXError TRAP-TYPE
|
|
ENTERPRISE dgs-1248tbx
|
|
DESCRIPTION
|
|
"Twisted Pair abnormal rx error trap."
|
|
::= 5
|
|
|
|
swTPAbnormalTXError TRAP-TYPE
|
|
ENTERPRISE dgs-1248tbx
|
|
DESCRIPTION
|
|
"Twisted Pair abnormal tx error trap."
|
|
::= 6
|
|
|
|
END
|