579 lines
23 KiB
Plaintext
579 lines
23 KiB
Plaintext
-- *****************************************************************
|
|
-- MY-PRIVATE-VLAN-MIB
|
|
-- Copyright (c).
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
DES7200-PRIVATE-VLAN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
myMgmt
|
|
FROM DES7200-SMI
|
|
ifIndex
|
|
FROM IF-MIB
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF;
|
|
|
|
myPrivateVlanMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200903230000Z"
|
|
ORGANIZATION "D-Link Crop."
|
|
CONTACT-INFO
|
|
"
|
|
http://support.dlink.com"
|
|
DESCRIPTION "The MIB module to support Private VLAN feature on switching devices."
|
|
REVISION "200903010000Z"
|
|
DESCRIPTION " The Initial version of this MIB module."
|
|
::= { myMgmt 44 }
|
|
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
|
|
PrivateVlanType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The VLAN type as defined for Private VLAN feature.
|
|
|
|
'normal' -- this VLAN is a normal VLAN (i.e., not a
|
|
private VLAN or private group).
|
|
|
|
'primary' -- this VLAN is the primary VLAN as defined for
|
|
Private VLAN feature.
|
|
|
|
'isolated' -- this VLAN is the isolated VLAN as
|
|
defined for Private VLAN feature. All the
|
|
ports in the isolated VLAN can only talk
|
|
to the specifically designated ports
|
|
configured as promiscuous ports, i.e.,
|
|
the ports even in the same isolated VLAN
|
|
can not talk to each other.
|
|
|
|
'community' -- this VLAN is the community VLAN as
|
|
defined for Private VLAN feature. All the
|
|
ports in this community VLAN can behave
|
|
like ports in normal VLAN type except
|
|
that they can also receive egress packets
|
|
tagged with its associated primary VLAN
|
|
ID.
|
|
|
|
A VLAN of isolated(3), community(4) type is also called a secondary VLAN."
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
primary(2),
|
|
isolated(3),
|
|
community(4)
|
|
}
|
|
|
|
VlanIndexOrZero ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "The VLAN ID or zero as defined for Private VLAN
|
|
feature. If the value is between 1 and 4095
|
|
inclusive, it represents an IEEE 802.1Q VLAN-ID.
|
|
If the value is zero, it is object-specific and
|
|
must therefore be defined as part of the
|
|
description of any object which uses this syntax."
|
|
SYNTAX INTEGER(0..4095)
|
|
|
|
VlanIndexBitmap ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "A string of octets containing one bit per VLAN for a
|
|
total of 1024 VLANs in the management domain.
|
|
The most significant bit of the octet string is the
|
|
lowest value VLAN of 1024 VLANs.
|
|
|
|
Refer to the description on the MIB object that
|
|
uses this textual convention to determine the meaning
|
|
of bits that are set ('1') or cleared ('0').
|
|
|
|
The most significant bit of the bitmap is transmitted
|
|
first. Note that if the length of this string is less than
|
|
128 octets, any 'missing' octets are assumed to contain
|
|
the value zero. An NMS may omit any zero-valued octets
|
|
from the end of this string in order to reduce SetPDU
|
|
size, and the agent may also omit zero-valued trailing
|
|
octets, to reduce the size of GetResponse PDUs."
|
|
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
|
|
|
|
mypvlanMIBObjects OBJECT IDENTIFIER ::= { myPrivateVlanMIB 1 }
|
|
|
|
mypvlanVlanObjects OBJECT IDENTIFIER ::= { mypvlanMIBObjects 1 }
|
|
|
|
mypvlanPortObjects OBJECT IDENTIFIER ::= { mypvlanMIBObjects 2 }
|
|
|
|
mypvlanSVIObjects OBJECT IDENTIFIER ::= { mypvlanMIBObjects 3 }
|
|
|
|
--
|
|
-- VLAN tables for Private VLAN feature
|
|
--
|
|
|
|
mypvlanVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MyPvlanVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing Private VLAN information on the
|
|
VLANs which currently exist."
|
|
::= { mypvlanVlanObjects 1 }
|
|
|
|
mypvlanVlanEntry OBJECT-TYPE
|
|
SYNTAX MyPvlanVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A conceptual row containing the Private VLAN
|
|
information on the VLANs for a particular management
|
|
domain."
|
|
INDEX { mypvlanVlanIndex}
|
|
::= { mypvlanVlanTable 1 }
|
|
|
|
MyPvlanVlanEntry ::= SEQUENCE {
|
|
mypvlanVlanIndex VlanIndexOrZero,
|
|
mypvlanVlanPrivateVlanType PrivateVlanType,
|
|
mypvlanVlanAssociatedPrimaryVlan VlanIndexOrZero,
|
|
mypvlanIfAssociatedPrimaryVlan TruthValue
|
|
}
|
|
|
|
mypvlanVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicated the VLAN id."
|
|
::= { mypvlanVlanEntry 1 }
|
|
|
|
mypvlanVlanPrivateVlanType OBJECT-TYPE
|
|
SYNTAX PrivateVlanType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Indicated the VLAN type as defined for Private VLAN
|
|
feature."
|
|
::= { mypvlanVlanEntry 2 }
|
|
|
|
mypvlanVlanAssociatedPrimaryVlan OBJECT-TYPE
|
|
SYNTAX VlanIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The VLAN ID of The associated primary VLAN used for
|
|
the Private VLAN feature if pvlanVlanPrivateVlanType
|
|
has the value of isolated(3), community(4). If pvlanVlanPrivateVlanType
|
|
has the value of normal(1) or primary(2), then this
|
|
object has the value of 0.
|
|
The value should be 0 when configuring 'private-vlan type'.
|
|
When configuring 'private-vlan association',the value of 0 means deleting the association, otherwise means
|
|
configure association on this primary vlan."
|
|
::= { mypvlanVlanEntry 3 }
|
|
|
|
mypvlanIfAssociatedPrimaryVlan OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "It indicate if the vlan assiociate with primary vlan when get the mib, and
|
|
indicate if setting the assiociate with primary vlan when set the mib, 0 means
|
|
configure 'private-vlan type', not 0 means configure 'private-vlan association'."
|
|
::= { mypvlanVlanEntry 4 }
|
|
|
|
--
|
|
-- Table for configuring host-association on host ports
|
|
--
|
|
|
|
mypvlanPrivatePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MyPvlanPrivatePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information of the configuration of
|
|
VLAN on the host ports of the device."
|
|
::= { mypvlanPortObjects 1 }
|
|
|
|
mypvlanPrivatePortEntry OBJECT-TYPE
|
|
SYNTAX MyPvlanPrivatePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A conceptual row containing information of the
|
|
configuration of VLAN for each host port.
|
|
When pvlanPrivatePortSecondaryVlan and pvlanPrivatePortPrimaryVlan
|
|
are both zero, it means deleting the configuration on the port, when they
|
|
are both nonzero, it means configuring the host port,
|
|
otherwise are invalid input. This table is valid only for host port."
|
|
INDEX { ifIndex }
|
|
::= { mypvlanPrivatePortTable 1 }
|
|
|
|
MyPvlanPrivatePortEntry ::= SEQUENCE {
|
|
mypvlanPrivatePortPrimaryVlan VlanIndexOrZero,
|
|
mypvlanPrivatePortSecondaryVlan VlanIndexOrZero
|
|
}
|
|
|
|
mypvlanPrivatePortPrimaryVlan OBJECT-TYPE
|
|
SYNTAX VlanIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VLAN ID of the primary VLAN configured on this
|
|
private port. If mypvlanPrivatePortPrimaryVlan and mypvlanPrivatePortSecondaryVlan
|
|
are both zero when set the mib, it means delete the private-vlan configuration on the host port."
|
|
::= { mypvlanPrivatePortEntry 1 }
|
|
|
|
mypvlanPrivatePortSecondaryVlan OBJECT-TYPE
|
|
SYNTAX VlanIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The VLAN ID of the secondary VLAN configured on this
|
|
private port.If mypvlanPrivatePortPrimaryVlan and mypvlanPrivatePortSecondaryVlan
|
|
are both zero when set the mib, it means delete the private-vlan configuration on the host port."
|
|
::= { mypvlanPrivatePortEntry 2 }
|
|
|
|
--
|
|
-- Table for remapping secondary VLAN to primary VLAN on promiscuous
|
|
-- ports for Private VLAN feature
|
|
--
|
|
|
|
mypvlanPromPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MyPvlanPromPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information of secondary VLAN to
|
|
primary VLAN remapping on ports of the device."
|
|
::= { mypvlanPortObjects 2 }
|
|
|
|
mypvlanPromPortEntry OBJECT-TYPE
|
|
SYNTAX MyPvlanPromPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A conceptual row containing information of secondary
|
|
VLAN to primary VLAN remapping for each port. An entry
|
|
is created by the managed system for each interface
|
|
which can be configured as a promiscuous port for
|
|
Private VLAN feature.This table is valid only for promiscuous port."
|
|
INDEX { ifIndex }
|
|
::= { mypvlanPromPortTable 1 }
|
|
|
|
MyPvlanPromPortEntry ::= SEQUENCE {
|
|
mypvlanPrivatePortPrimaryVlanId VlanIndexOrZero,
|
|
mypvlanPromPortSecondaryRemap OCTET STRING,
|
|
mypvlanPromPortSecondaryRemap2k OCTET STRING,
|
|
mypvlanPromPortSecondaryRemap3k OCTET STRING,
|
|
mypvlanPromPortSecondaryRemap4k OCTET STRING
|
|
}
|
|
|
|
mypvlanPrivatePortPrimaryVlanId OBJECT-TYPE
|
|
SYNTAX VlanIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Primary Vlan Id configured on the promiscuous port, it is zero
|
|
when delete the remapping on the port."
|
|
::= { mypvlanPromPortEntry 1 }
|
|
|
|
mypvlanPromPortSecondaryRemap OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A string of octets containing one bit per VLAN in the
|
|
management domain on this port. The first octet
|
|
corresponds to VLANs with VlanIndexOrZero values of 0
|
|
through 7; the second octet to VLANs 8 through 15; etc.
|
|
The most significant bit of each octet corresponds to
|
|
the lowest value VlanIndexOrZero in that octet.
|
|
|
|
A bit can only be set to '1' when the bit is
|
|
corresponding to a VLAN of Private VLAN isolated,
|
|
community type which has already
|
|
been associated with a primary VLAN.
|
|
|
|
Note that if the length of this string is less than
|
|
128 octets, any 'missing' octets are assumed to contain
|
|
the value zero. An NMS may omit any zero-valued octets
|
|
from the end of this string in order to reduce SetPDU
|
|
size, and the agent may also omit zero-valued trailing
|
|
octets, to reduce the size of GetResponse PDUs."
|
|
::= { mypvlanPromPortEntry 2 }
|
|
|
|
mypvlanPromPortSecondaryRemap2k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A string of octets containing one bit per VLAN for
|
|
VLANs with VlanIndexOrZero values of 1024 through 2047
|
|
in the management domain on this port. The first octet
|
|
corresponds to VLANs with VlanIndexOrZero values of 1024
|
|
through 1031; the second octet to VLANs 1032 through
|
|
1039; etc. The most significant bit of each octet
|
|
corresponds to the lowest value VlanIndexOrZero in
|
|
that octet.
|
|
|
|
A bit can only be set to '1' when the bit is
|
|
corresponding to a VLAN of Private VLAN isolated or
|
|
community type which has already been associated with a
|
|
primary VLAN.
|
|
|
|
Note that if the length of this string is less than
|
|
128 octets, any 'missing' octets are assumed to contain
|
|
the value zero. An NMS may omit any zero-valued octets
|
|
from the end of this string in order to reduce SetPDU
|
|
size, and the agent may also omit zero-valued trailing
|
|
octets, to reduce the size of GetResponse PDUs.
|
|
|
|
This object is only instantiated on devices which support
|
|
the range of VlanIndexOrZero up to 4095."
|
|
::= { mypvlanPromPortEntry 3 }
|
|
|
|
mypvlanPromPortSecondaryRemap3k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A string of octets containing one bit per VLAN for
|
|
VLANs with VlanIndexOrZero values of 2048 through 3071
|
|
in the management domain on this port. The first octet
|
|
corresponds to VLANs with VlanIndexOrZero values of 2048
|
|
through 2055; the second octet to VLANs 2056 through
|
|
2063; etc. The most significant bit of each octet
|
|
corresponds to the lowest value VlanIndexOrZero in
|
|
that octet.
|
|
|
|
A bit can only be set to '1' when the bit is
|
|
corresponding to a VLAN of Private VLAN isolated or
|
|
community type which has already been associated with a
|
|
primary VLAN.
|
|
|
|
Note that if the length of this string is less than
|
|
128 octets, any 'missing' octets are assumed to contain
|
|
the value zero. An NMS may omit any zero-valued octets
|
|
from the end of this string in order to reduce SetPDU
|
|
size, and the agent may also omit zero-valued trailing
|
|
octets, to reduce the size of GetResponse PDUs.
|
|
|
|
This object is only instantiated on devices which support
|
|
the range of VlanIndexOrZero up to 4095."
|
|
::= { mypvlanPromPortEntry 4 }
|
|
|
|
mypvlanPromPortSecondaryRemap4k OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A string of octets containing one bit per VLAN for
|
|
VLANs with VlanIndexOrZero values of 3072 through 4095
|
|
in the management domain on this port. The first octet
|
|
corresponds to VLANs with VlanIndexOrZero values of 3072
|
|
through 3079; the second octet to VLANs 3080 through
|
|
3087; etc. The most significant bit of each octet
|
|
corresponds to the lowest value VlanIndexOrZero in
|
|
that octet.
|
|
|
|
A bit can only be set to '1' when the bit is
|
|
corresponding to a VLAN of Private VLAN isolated or
|
|
community type which has already been associated with a
|
|
primary VLAN.
|
|
|
|
Note that if the length of this string is less than
|
|
128 octets, any 'missing' octets are assumed to contain
|
|
the value zero. An NMS may omit any zero-valued octets
|
|
from the end of this string in order to reduce SetPDU
|
|
size, and the agent may also omit zero-valued trailing
|
|
octets, to reduce the size of GetResponse PDUs.
|
|
|
|
This object is only instantiated on devices which support
|
|
the range of VlanIndexOrZero up to 4095."
|
|
::= { mypvlanPromPortEntry 5 }
|
|
|
|
|
|
--
|
|
-- Table for configuring port mode for Private VLAN feature
|
|
--
|
|
|
|
mypvlanPortModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MyPvlanPortModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing information of the configuration of
|
|
port mode for the Private VLAN feature."
|
|
::= { mypvlanPortObjects 3 }
|
|
|
|
mypvlanPortModeEntry OBJECT-TYPE
|
|
SYNTAX MyPvlanPortModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A conceptual row containing information of the
|
|
configuration of port mode on each port for the
|
|
Private VLAN feature. An entry of this table is
|
|
created by the managed system when the capability
|
|
to be a Private VLAN port is detected on an
|
|
interface."
|
|
INDEX { ifIndex }
|
|
::= { mypvlanPortModeTable 1 }
|
|
|
|
MyPvlanPortModeEntry ::= SEQUENCE {
|
|
mypvlanPortMode INTEGER
|
|
}
|
|
|
|
mypvlanPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nonPrivateVlan(1),
|
|
host(2),
|
|
promiscuous(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Private VLAN port mode on this port.
|
|
|
|
nonPrivateVlan(1) -- this port is configured to be a
|
|
non-Private-VLAN port.
|
|
|
|
host(2) -- this port is configured to be
|
|
a Private-VLAN host port, i.e., private
|
|
port.
|
|
|
|
promiscuous(3) -- this port is configured to be
|
|
a Private-VLAN promiscuous port."
|
|
::= { mypvlanPortModeEntry 1 }
|
|
|
|
--
|
|
-- Private VLAN mapping for the Switch Virtual Interfaces
|
|
--
|
|
|
|
mypvlanSVIMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MyPvlanSVIMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing the configuration of
|
|
primary VLAN SVI (Switch Virtual Interfaces)
|
|
mapping for the secondary VLANs for the Private
|
|
VLAN feature."
|
|
::= { mypvlanSVIObjects 1 }
|
|
|
|
mypvlanSVIMappingEntry OBJECT-TYPE
|
|
SYNTAX MyPvlanSVIMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A conceptual row containing the Primary VLAN
|
|
SVI mapping configuration for the existing
|
|
secondary VLANs. An entry is created by the managed
|
|
system for each VLAN with corresponding VLAN's
|
|
pvlanVlanPrivateVlanType of isolated(3), community(4)."
|
|
INDEX { mypvlanSVIMappingVlanIndex }
|
|
::= { mypvlanSVIMappingTable 1 }
|
|
|
|
MyPvlanSVIMappingEntry ::= SEQUENCE {
|
|
mypvlanSVIMappingVlanIndex VlanIndexOrZero,
|
|
mypvlanSVIMappingPrimarySVI VlanIndexOrZero
|
|
}
|
|
|
|
mypvlanSVIMappingVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies the
|
|
Virtual LAN associated with this information."
|
|
::= { mypvlanSVIMappingEntry 1 }
|
|
|
|
mypvlanSVIMappingPrimarySVI OBJECT-TYPE
|
|
SYNTAX VlanIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The Vlan ID of the primary VLAN SVI this secondary
|
|
VLAN is mapped to for the Private VLAN feature.
|
|
This object has the value of zero if this secondary
|
|
VLAN is not mapped to any primary VLAN SVI."
|
|
::= { mypvlanSVIMappingEntry 2 }
|
|
|
|
--
|
|
-- Conformance Information
|
|
--
|
|
|
|
mypvlanMIBConformance OBJECT IDENTIFIER ::= { myPrivateVlanMIB 2 }
|
|
mypvlanMIBCompliances OBJECT IDENTIFIER ::= { mypvlanMIBConformance 1 }
|
|
mypvlanMIBGroups OBJECT IDENTIFIER ::= { mypvlanMIBConformance 2}
|
|
|
|
--
|
|
-- compliance statements
|
|
--
|
|
|
|
mypvlanMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for Private VLAN feature
|
|
implementation."
|
|
MODULE -- this module
|
|
-- no MANDATORY-GROUPS
|
|
|
|
GROUP mypvlanVlanGroup
|
|
DESCRIPTION "This group must be implemented on devices which has
|
|
Private VLAN feature support."
|
|
|
|
GROUP mypvlanPrivatePortGroup
|
|
DESCRIPTION "This group must be implemented on devices which has
|
|
Private VLAN feature support."
|
|
|
|
GROUP mypvlanPromPortGroup
|
|
DESCRIPTION "This group must be implemented on devices which has
|
|
support for promiscuous port of Private VLAN feature."
|
|
|
|
GROUP mypvlanPortModeGroup
|
|
DESCRIPTION "A collection of objects providing basic
|
|
port mode configuration for Private VLAN feature."
|
|
|
|
GROUP mypvlanSVIGroup
|
|
DESCRIPTION "A collection of objects providing
|
|
svi mapping configuration for Private VLAN feature."
|
|
|
|
::= { mypvlanMIBCompliances 1 }
|
|
|
|
--
|
|
-- units of conformance
|
|
--
|
|
mypvlanVlanGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mypvlanVlanIndex,
|
|
mypvlanVlanPrivateVlanType,
|
|
mypvlanVlanAssociatedPrimaryVlan,
|
|
mypvlanIfAssociatedPrimaryVlan
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing basic VLAN
|
|
configuration for Private VLAN feature."
|
|
::= { mypvlanMIBGroups 1 }
|
|
|
|
mypvlanPrivatePortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mypvlanPrivatePortPrimaryVlan,
|
|
mypvlanPrivatePortSecondaryVlan
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing basic
|
|
private port configuration for Private VLAN
|
|
feature."
|
|
::= { mypvlanMIBGroups 2 }
|
|
|
|
mypvlanPromPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mypvlanPrivatePortPrimaryVlan,
|
|
mypvlanPromPortSecondaryRemap,
|
|
mypvlanPromPortSecondaryRemap2k,
|
|
mypvlanPromPortSecondaryRemap3k,
|
|
mypvlanPromPortSecondaryRemap4k
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing basic
|
|
promiscuous port configuration for Private
|
|
VLAN feature."
|
|
::= { mypvlanMIBGroups 3 }
|
|
|
|
mypvlanPortModeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mypvlanPortMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing basic
|
|
port mode configuration for Private VLAN feature."
|
|
::= { mypvlanMIBGroups 4 }
|
|
|
|
mypvlanSVIGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mypvlanSVIMappingPrimarySVI
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing
|
|
svi mapping configuration for Private VLAN feature."
|
|
::= { mypvlanMIBGroups 5 }
|
|
END |